Comparison of the MARC and CRAC2 programs for assessing the radiological consequences of accidental releases of radioactive material

CERN Document Server

Hemming, C R; Charles, D; Ostmeyer, R M

1983-01-01

This report describes a comparison of the MARC (Methodology for Assessing Radiological Consequences) and CRAC2 (Calculation of Reactor Accident Consequences, version 2) computer programs for assessing the radiological consequences of accidental releases of radioactive material. A qualitative comparison has been made of the features of the constituent sub-models of the two codes, and potentially the most important differences identified. The influence of these differences has been investigated quantitatively by comparison of the predictions of the two codes in a wide variety of circumstances. Both intermediate quantities and endpoints used as a measure of risk have been compared in order to separate the variables more clearly. The results indicate that, in general, the predictions of MARC and CRAC2 are in good agreement.

Evidence Theory Based Uncertainty Quantification in Radiological Risk due to Accidental Release of Radioactivity from a Nuclear Power Plant

International Nuclear Information System (INIS)

Ingale, S. V.; Datta, D.

2010-01-01

Consequence of the accidental release of radioactivity from a nuclear power plant is assessed in terms of exposure or dose to the members of the public. Assessment of risk is routed through this dose computation. Dose computation basically depends on the basic dose assessment model and exposure pathways. One of the exposure pathways is the ingestion of contaminated food. The aim of the present paper is to compute the uncertainty associated with the risk to the members of the public due to the ingestion of contaminated food. The governing parameters of the ingestion dose assessment model being imprecise, we have approached evidence theory to compute the bound of the risk. The uncertainty is addressed by the belief and plausibility fuzzy measures.

Liquid pathway generic study. Impacts of accidental radioactive releases to the hydrosphere from floating and land-based nuclear power plants

International Nuclear Information System (INIS)

1978-02-01

The staff concludes that for representative sites, there are differences in the impacts of accidental radioactive releases to the hydrosphere between floating nuclear plants (FNPs) and land-based plants (LBPs) of the ice-condenser type. The consequences of releases from design basis accidents are found to be lower for an FNP than for an LBP. For core-melt events which we consider to be of very low probability, the staff results indicate that the expected liquid pathway consequences are higher at an FNP than at an LBP, and that interdiction at the site is not likely for an FNP. The staff considers this combination of differences in release magnitude and interdiction potential to be significant. An assessment of the overall significance of the total risk associated with potential releases to liquid and airborne pathways will be considered in a forthcoming environmental impact statement for the FNP. This environmental impact statement will include a consideration of the environmental, social, and economic impacts of the operation of the FNP, as well as a value-impact analysis of alternatives which may avoid or mitigate radiological impacts to the environment

Air concentration and ground deposition following radioactive airborne releases

International Nuclear Information System (INIS)

Brofferio, C.; Cagnetti, P.; Ferrara, V.

1985-01-01

The fundamental aim of this report is to provide the mathematical and physical operational basis for the evaluation of air concentration and ground deposition, following radioactive airborne releases from a nuclear power plant, both during normal operations and in accidental conditions. As far as accidental releases are concerned, the basical assumptions on meteorological and diffusive situation are considered from a safety point of view: namely those pessimistic but realistically representative situation are taken into account which lead to maximum air concentration and ground deposition values, even if characterized by low recurrence probability. Those elements are the inputs for many environmental transfer models of maximum consequence evaluations up to man. As far as routine releases are concerned, it is shown, together with the usual models based on long term averaged meteorological conditions, also models studied to estimate atmospheric diffusion and deposition in low wind situations and in fog conditions, being those latter very frequent in the Po valley. Finally, the main operations and modalities of collecting and elaborating meteorological data for for radioprotection evaluations are also shown. It is to be pointed out that the methods and the models developed and considered in this work are of a more general validity, and can be also used for applications concerning non-radioactive releases, as it is the case when dealing with conventional power plants

Dose mortality relationships: implications for hypothetical accidental releases from FBRs

International Nuclear Information System (INIS)

Kelly, G.N.

1979-01-01

A summary is given of the findings detailed in the most recent of a series of radiological studies of a liquid metal-cooled fast breeder reactor (Kelly, G.N. Simmonds, J.R. Smith, H. and Stather, J.W., The radiological consequences of notional accidental releases of radioactivity from fast breeder reactors: sensitivity to the dose-effect relationships adopted for early biological effects, Harwell, National Radiological Protection Board, NRPB-R87. London, HMSO (1979)). The results have indicated those areas where effort might be most profitably directed to improve the reliability of the predicted consequences. The composition of the released activity has been shown to have a marked influence on the sensitivity of the predicted consequences, and application of simple supportive medical treatment has a potential for reducing the predicted consequences by factors of up to an order of magnitude, depending on the composition of the release. (UK)

PAVAN: an atmospheric-dispersion program for evaluating design-basis accidental releases of radioactive materials from nuclear power stations

International Nuclear Information System (INIS)

Bander, T.J.

1982-11-01

This report provides a user's guide for the NRC computer program, PAVAN, which is a program used by the US Nuclear Regulatory Commission to estimate downwind ground-level air concentrations for potential accidental releases of radioactive material from nuclear facilities. Such an assessment is required by 10 CFR Part 100 and 10 CFR Part 50. The program implements the guidance provided in Regulatory Guide 1.145, Atmospheric Dispersion Models for Potential Accident Consequence Assessments at Nuclear Power Plants. Using joint frequency distributions of wind direction and wind speed by atmospheric stability, the program provides relative air concentration (X/Q) values as functions of direction for various time periods at the exclusion area boundary (EAB) and the outer boundary of the low population zone (LPZ). Calculations of X/Q values can be made for assumed ground-level releases (e.g., through building penetrations and vents) or elevated releases from free-standing stacks. Various options may be selected by the user. They can account for variation in the location of release points, additional plume dispersion due to building wakes, plume meander under low wind speed conditions, and adjustments to consider non-straight trajectories. It computes an effective plume height using the physical release height which can be reduced by inputted terrain features. It cannot handle multiple emission sources. A description of the main program and all subroutines is provided. Also included as appendices are a complete listing of the program and two test cases with the required data inputs and the resulting program outputs

The radiological consequences of notional accidental releases of radioactivity from fast breeder reactors: the influence of the meteorological conditions

International Nuclear Information System (INIS)

Hemming, C.R.; Hallam, J.; Kelly, G.N.

1980-04-01

The radiological consequences of a wide range of notional accidental releases from a 1300 MW(e) LMFBR (liquid Metal-cooled Fast Breeder Reactor) were assessed in a previous study by the National Radiological Protection Board. In the present study the sensitivity of the predicted consequences to the meteorological conditions was investigated. The influence of the wind direction, and hence the distribution of the exposed population, and of atmospheric stability at the time of the release are considered separately. Conclusions are reached on the precision required in specifying atmospheric stability conditions to estimate reliably the distribution of possible consequences following a given release of activity. The probability distributions of consequences for selected releases from two locations are evaluated taking account of the frequency distribution of wind direction and atmospheric stability at each location. The variation is large and demonstrates the importance of taking account of the whole range of meteorological conditions when assessing the risk presented by an accidental release of activity. (author)

HABIT, Toxic and Radioactive Release Hazards in Reactor Control Room

International Nuclear Information System (INIS)

Stage, S.A.

2005-01-01

1 - Description of program or function: HABIT is a package of computer codes designed to be used for the evaluation of control room habitability in the event of an accidental release of toxic chemicals or radioactive materials. 2 - Methods: Given information about the design of a nuclear power plant, a scenario for the release of toxic or radionuclides, and information about the air flows and protection systems of the control room, HABIT can be used to estimate the chemical exposure or radiological dose to control room personnel

The estimation of areas of ground that may be contaminated after an accidental release of pollutant to the atmosphere

International Nuclear Information System (INIS)

Corbett, J.O.

1979-01-01

A method is developed for calculating the area of ground contaminated above a prescribed level after an accidental release of radioactivity or any other pollutant to the atmosphere. Numerical calculations are made for a wide range of releases, atmospheric conditions and rates of wet and dry deposition. It is shown that high atmospheric stability and rain both tend to maximize the area of significant contamination for most of the plausible range of releases. However, for very large hypothetical releases, dry conditions with an unstable atmosphere spread significant contamination furthest afield. (author)

The influence of season of the year on the predicted agricultural consequences of accidental releases of radionuclides to atmosphere

International Nuclear Information System (INIS)

Simmonds, J.R.

1985-02-01

In Europe, because of the seasonal nature of agricultural practices, the consequences for agriculture of an accidental release of radioactive materials to atmosphere are likely to vary depending upon the time of year when the release occurs. The quantification of this variation is complicated by the need to take into account the introduction of countermeasures to restrict the radiation exposure from ingestion of contaminated foods, and by the presence in accidental releases of radionuclides which persist over several seasons. In this study, the effect on agricultural consequences of accidental releases occurring at different times of the year is examined. The consequences are expressed in terms of the amount of produce affected by restrictions on food supplies and the collective radiation dose from ingestion of food. The investigation has been carried out for three hypothetical releases representing a range of releases postulated for pressurised water reactors (PWRs). The effect of season of the year was determined for accidental releases occurring both in a single, defined set of meteorological conditions and for a range of possible meteorological conditions. For the main part of the study, consideration was limited to agricultural production in the UK only, but the effect of extending the analysis beyond the UK boundary was also considered. The results of the study show that considerable variation can occur in agricultural consequences following an accidental release at different times of the year. For the larger releases considered, this variation is reduced due to the effect of the introduction of countermeasures, particularly when consideration is limited to the UK only. Seasonal variation tends to be greater for the results of a deterministic analysis, which uses a single set of constant meteorological conditions, than for the results of a full probabilistic assessment. From the results presented here it is also seen that for many applications of

SUBDOSA: a computer program for calculating external doses from accidental atmospheric releases of radionuclides

International Nuclear Information System (INIS)

Strenge, D.L.; Watson, E.C.; Houston, J.R.

1975-06-01

A computer program, SUBDOSA, was developed for calculating external γ and β doses to individuals from the accidental release of radionuclides to the atmosphere. Characteristics of SUBDOSA are: doses from both γ and β radiation are calculated as a function of depth in tissue, summed and reported as skin, eye, gonadal, and total body dose; doses are calculated for releases within each of several release time intervals and nuclide inventories and atmospheric dispersion conditions are considered for each time interval; radioactive decay is considered during the release and/or transit using a chain decay scheme with branching to account for transitions to and from isomeric states; the dose from gamma radiation is calculated using a numerical integration technique to account for the finite size of the plume; and the program computes and lists the normalized air concentrations at ground level as a function of distance from the point of release. (auth)

Limits to radioactive effluents and countermeasures in accidental situations

International Nuclear Information System (INIS)

Nowotny, G.; Gonzalez, A.

1978-01-01

The paper discusses the criteria used by the Argentine Atomic Energy Commission, as competent authority, to set limits to radioactive effluents from nuclear installations. It also discusses the selection of action levels for carrying out countermeasures in accidental situations. (author)

Computer programs at SRL to evaluate environmental effects SRP operations and postulated accidental releases

International Nuclear Information System (INIS)

Cooper, R.E.

1975-09-01

Savannah River Plant operations unavoidably result in the release of some chemical and radioactive effluents to the environs. The most environmentally significant releases are gaseous effluents to the atmosphere; computer codes dealing with these atmospheric releases are discussed in this report. There is a wide variety of effluents, both chemical and radioactive, to be considered, and each must be correlated with meteorological dispersion data as a function of time to estimate the environmental effects. In addition, large inventories of toxic and radioactive materials in some facilities represent a potential for accidental releases. Accidents are postulated for these facilities, and the environmental effects of resulting releases are again evaluated by correlating with meteorological dispersion data. In accordance with AEC Regulatory Guide 23, a 2-year meteorological data base is used in performing all analyses. Due to the diversity of possible releases and the large meteorological data base, the environmental analyses are necessarily performed with the aid of a large computer facility. Several computer programs have been written to facilitate these analyses according to the type of analysis desired. The computer programs described in this report are basically of three categories: probability distributions of estimated concentrations or doses as a function of distance from a point of origin, estimates of average concentrations or doses over a specified time period such as annual averages, and some miscellaneous programs in support of the first two categories to optimize the use of the computing facility. A complete documentation of each program is included with a program listing and sample input-output

Nuclear power: Accidental releases - principles of public health action

International Nuclear Information System (INIS)

1984-01-01

This report is based on the collective knowledge and experience of the members of a Working Group, convened by WHO in collaboration with the Government of Belgium in Brussels on 23-27 November 1981, to discuss and appraise the different actions that might be taken following accidental radioactive releases from nuclear plants. It does not provide detailed technical data, but broadly surveys the rational basis for decision-making, indicating the present position as assessed by members of the Working Group. Four major disciplines (radiological protection, health physics, environmental science and technology, and human biology) and three main professional categories (physicians, engineers and physicists) were represented, providing a comprehensive multidisciplinary approach to the topic. The purpose of this report is to give guidance to national authorities on how to develop the capacity to take action in a nuclear emergency

Simulated atmospheric disperison of radioactive material released in an urban area

International Nuclear Information System (INIS)

Akins, R.E.; Church, H.W.; Tierney, M.S.

1977-01-01

A combination of Gaussian plume and particle-in-cell techniques is used to simulate the atmospheric transport and dispersion of a puff release of radioactive material. The release is caused by an accident that is assumed to occur during the shipment of the radioactive material through central New York City. The simulation provides estimates of volumetric and surface concentrations of the dispersed material that are used to predict radiation doses incurred by the City's population in the event of an accidental release. In the simulation, the release point is arbitrary and the material is assumed to be either a gas or fine particles. The Gaussian plume model follows cloud concentrations from the release time until times when transport over distances up to 500 m has been achieved. The released cloud may stabilize at street level or above the mean buildings height; at a street intersection or in the middle of the block. The possibility of the formation of multiple clouds, owing to circumstances of wind flow direction and street geometry, is allowed

The radiological consequences of notional accidental releases of radioactivity from fast breeder reactors: sensitivity to the dose-effect relationships adopted for early biological effects

International Nuclear Information System (INIS)

Kelly, G.N.; Simmonds, J.R.; Smith, H.; Stather, J.W.

1979-07-01

This study considered the sensitivity to the dose-response relationships adopted for the estimation of early biological effects from notional accidental releases of radioactivity from fast breeder reactors. Two distinct aspects were considered: the sensitivity of the predicted consequences to variation in the dose-mortality relationships for irradiation of the bone marrow and the lung; and the influence of simple supportive medical treatment in reducing the incidence of early deaths in the exposed population. The numbers of early effects estimated in the initial study were relatively insensitive to variation in the dose-mortality relationships within the bounds proposed. The few exceptions concerned releases of particular nuclide composition, and the variation in the predicted consequences could be around an order of magnitude; the absolute numbers of effects however were in general small when the sensitivity was most pronounced. The reduction in the incidence of early deaths when using simple supportive treatment varied markedly with the nuclide composition of the release. Areas of uncertainty were identified where further research and investigation might most profitably be directed with a view to improving the reliability of the dose-effect relationships adopted and hence of the predicted consequences of the release considered. (author)

Maxine: A spreadsheet for estimating dose from chronic atmospheric radioactive releases

Energy Technology Data Exchange (ETDEWEB)

Jannik, Tim [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Bell, Evaleigh [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Dixon, Kenneth [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-07-24

MAXINE is an EXCEL© spreadsheet, which is used to estimate dose to individuals for routine and accidental atmospheric releases of radioactive materials. MAXINE does not contain an atmospheric dispersion model, but rather doses are estimated using air and ground concentrations as input. Minimal input is required to run the program and site specific parameters are used when possible. Complete code description, verification of models, and user’s manual have been included.

Review of decontamination and clean-up techniques for use in the UK following accidental releases of radioactivity to the environment

International Nuclear Information System (INIS)

Brown, J.; Cooper, J.R.; Jones, J.A.; Flaws, L.; McGeary, R.; Spooner, J.

1996-10-01

This review examines decontamination and clean-up methodologies that may be applied following an accidental release of radionuclides to the atmosphere in the UK. An accidental release of radionuclides to the environment could cause contamination of land and property, and may necessitate movement of the resident population to reduce their exposure. Decontamination procedures may reduce the level of contamination and, in determining whether to implement such procedures in an affected area, it is necessary to weigh the effectiveness of the techniques against the associated economic costs and other disadvantages. The report gives a review of available methods of decontamination and clean-up in terms of the effectiveness of the various methods to remove activity from building or land surfaces and dose saved. It also considers associated disadvantages, costs, clean-up rates for land and buildings, waste disposal implications, and personnel and resource requirements. On the basis of these factors, the techniques are prioritised and overall strategies for decontamination following releases of both fission products and alpha emitters are presented. (author)

Radiation exposure in an urban dwelling following an accidental release of radioactivity

International Nuclear Information System (INIS)

Cannell, Robert J.

1988-01-01

The intent of this work is the improved knowledge of how much protection would be afforded to the occupants of a dwelling in the event of a release of radioactivity into the environment. Fundamental to this is the question of how radioactive aerosols and dusts outside of a dwelling affect the inhabitants, what proportion of and by what routes radioactive materials penetrate the structural fabric of the dwelling, and again, how these materials affect the occupants once inside the dwelling. Whilst related research has already provided some answers to this question, experimental work on the tracking of radioactive materials or their analogues was, and still is, required. The major effort of this research has been in the development of an image gathering and processing system which provides a measurement of the mass and spatial distribution of a fluorescent tracer deposited on a surface. Although capable of further refinement, the technique is usable experimentally and its initial use in studying the transport of tracer analogues of radioactive materials is described. One of the main determinants of the behaviour of aerosols is their deposition rate and measurements of this rate for several aerosol-bound radionuclides were made in a test house. The results of these measurements and the dust transport experiments are collated and together with current values from the literature provide the input data for a computer house model. This simple house model has been developed with the primary purpose of indicating which parameters, specifically related to the characteristics of a dwelling, are most influential in determining what degree of protection the occupants will gain. The estimates of protection resulting from the model are summarised, and its sensitivity to the input parameters is used to indicate where further experimental work needs to be undertaken. (author)

Review of calculational models and computer codes for environmental dose assessment of radioactive releases

International Nuclear Information System (INIS)

Strenge, D.L.; Watson, E.C.; Droppo, J.G.

1976-06-01

The development of technological bases for siting nuclear fuel cycle facilities requires calculational models and computer codes for the evaluation of risks and the assessment of environmental impact of radioactive effluents. A literature search and review of available computer programs revealed that no one program was capable of performing all of the great variety of calculations (i.e., external dose, internal dose, population dose, chronic release, accidental release, etc.). Available literature on existing computer programs has been reviewed and a description of each program reviewed is given

Review of calculational models and computer codes for environmental dose assessment of radioactive releases

Energy Technology Data Exchange (ETDEWEB)

Strenge, D.L.; Watson, E.C.; Droppo, J.G.

1976-06-01

The development of technological bases for siting nuclear fuel cycle facilities requires calculational models and computer codes for the evaluation of risks and the assessment of environmental impact of radioactive effluents. A literature search and review of available computer programs revealed that no one program was capable of performing all of the great variety of calculations (i.e., external dose, internal dose, population dose, chronic release, accidental release, etc.). Available literature on existing computer programs has been reviewed and a description of each program reviewed is given.

Results of dose calculations for NET accidental and normal operation releases of tritium and activation products

International Nuclear Information System (INIS)

Raskob, W.; Hasemann, I.

1992-08-01

This report documents conditions, data and results of dose calculations for accidental and normal operation releases of tritium and activation products, performed within the NET subtask SEP2.2 ('NET-Benchmark') of the European Fusion Technology Programme. For accidental releases, the computer codes UFOTRI and COSYMA for assessing the radiological consequences, have been applied for both deterministic and probabilistic calculations. The influence on dose estimates of different release times (2 minutes / 1 hour), two release heights (10 m / 150 m), two chemical forms of tritium (HT/HTO), and two different model approaches for the deposition velocity of HTO on soil was investigated. The dose calculations for normal operation effluents were performed using the tritium model of the German regulatory guidelines, parts of the advanced dose assessment model NORMTRI still under development, and the statistical atmospheric dispersion model ISOLA. Accidental and normal operation source terms were defined as follows: 10g (3.7 10 15 Bq) for accidental tritium releases, 10 Ci/day (3.7 10 11 Bq/day) for tritium releases during normal operation and unit releases of 10 9 Bq for accidental releases of activation products and fission products. (orig./HP) [de

Computer code to assess accidental pollutant releases

International Nuclear Information System (INIS)

Pendergast, M.M.; Huang, J.C.

1980-07-01

A computer code was developed to calculate the cumulative frequency distributions of relative concentrations of an air pollutant following an accidental release from a stack or from a building penetration such as a vent. The calculations of relative concentration are based on the Gaussian plume equations. The meteorological data used for the calculation are in the form of joint frequency distributions of wind and atmospheric stability

Compliance of the Vaalputs national radioactive waste disposal facility to a frequency-magnitude release criterion as required for licensing

International Nuclear Information System (INIS)

Adrian, H.W.W.; Gerber, H.H.; Kruger, J.; Weygand, J.

1986-01-01

Accidental releases of radioactivity from the Vaalputs nuclear waste repository have been quantified and release frequencies have been attached to a number of accident scenarios of human or natural origin. These have then been compared to a frequency-magnitude release criterion according to South African licensing requirements. It was shown that the criterion was applicable in three release bands. In two of these the criterion was met by some orders of magnitude. In the third band the permitted release frequency was a factor 55 below the limit in spite of pessimistic release assumptions

Dose assessment under incidental and accidental conditions

International Nuclear Information System (INIS)

Huebschmann, W.G.

1988-01-01

Dose assessment for the licesing process of a nuclear power plant covers the routine release of radioactive substances into the atmosphere as well as releases due to incidents. Source terms for these incidents are evaluated by the detailed incident analysis of the plant. The types of incidents to be covered are determined in the FRG by the ''Stoerfall-Leitlinien'' of the Ministry of the Interior. The calculation of dose equivalents in the environment of the plant differs from the calculation of doses due to routine releases, as incidents are single events occuring at undeterminate time, and the results must be conservative. Some details are being described. During the operation of the plant it is essential to measure not only the radioactivity release rates but also the necessary meteorological parameters for the instantaneous determination of the atmospheric dispersion in case of incidental or accidental releases of radioactivity. This instantaneous assessment assists in taking measurements of ground contamination and in deciding about countermeasures for the protection of plant personnell and population. (author) [pt

Analyses of postulated accidental releases of UF6 inside process buildings

International Nuclear Information System (INIS)

Oliveira Neto, Jose Messias de; Nunes, Beatriz Guimaraes; Dias, Cristiane

2009-01-01

Uranium Hexafluoride is a material used in the various processes which comprise the front end of the nuclear fuel cycle (conversion, enrichment and fuel fabrication). Confinement of UF 6 is a very important safety requirement since this material is highly reactive and presents safety hazards to humans. The present paper discusses the safety relevant aspects of accidental releases of UF 6 inside process confinement buildings. Postulated accidental scenarios are analyzed and their consequences evaluated. Implant releases rates are estimated using computer code predictions. A time dependent homogeneous compartment model is used to predict concentrations of UF 6 , hydrogen fluoride and uranyl fluoride inside a confinement building, as well as to evaluate source terms released to the atmosphere. These source terms can be used as input to atmospheric dispersion models to evaluate consequences to the environment. The results can also be used to define adequate protective measures for emergency situations. (author)

PAVAN, Atmospheric Dispersion of Radioactive Releases from Nuclear Power Plants

International Nuclear Information System (INIS)

2001-01-01

1 - Description of program or function: PAVAN estimates down-wind ground-level air concentrations for potential accidental releases of radioactive material from nuclear facilities. Options can account for variation in the location of release points, additional plume dispersion due to building wakes, plume meander under low wind speed conditions, and adjustments to consider non-straight trajectories. It computes an effective plume height using the physical release height which can be reduced by inputted terrain features. 2 - Method of solution: Using joint frequency distributions of wind direction and wind speed by atmospheric stability, the program provides relative air concentration (X/Q) values as functions of direction for various time periods at the exclusion area boundary (EAB) and the outer boundary of the low population zone (LPZ). Calculations of X/Q values can be made for assumed ground-level releases or evaluated releases from free-standing stacks. The X/Q calculations are based on the theory that material released to the atmosphere will be normally distributed (Gaussian) about the plume centerline. A straight-line trajectory is assumed between the point of release and all distances for which X/Q values are calculated. 3 - Restrictions on the complexity of the problem: - The code cannot handle multiple emission sources

Report of the consultant's meeting on monitoring accidentally released radionuclides in the environment

International Nuclear Information System (INIS)

2001-01-01

At an earlier Research Co-ordination Meeting (12-16 August 1991, VIC, Vienna) for the IAEA Programme on 'Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples', it was recognized that a network of analytical laboratories with specially qualified scientists is needed which will provide a timely coordinated response to any future requests for assistance from Member States. The experience gained from the International Chernobyl Project revealed that there is a need for such a closely linked group when the Member State lacks sufficient technical resource to independently perform an assessment of environmental contamination following an accidental release of radioactivity. The existence of such a network of laboratories would help to assure responsible government representatives and the general public that the Agency has additional available resources including specialized experts to perform assessments on which to base required actions for many accident scenarios and their radiological consequences. The purpose of the present Consultants' Meeting is to discuss the organization and scope of the proposed network of analytical laboratories. The Consultants should discuss the matrices and nuclides of interest at various time frames of an accidental release of radioactivity. It is also intended that the Consultants should discuss the laboratories from their experience which would have the specialized expertise needed, in both terrestrial and aquatic sample collection and analysis. Finally, it is intended that the Consultants should discuss whether it would be desirable for the Agency to produce a technical document based on the achievements of the Agency programme on 'Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples'. A Guide Book was considered essential by the participants of this Co-ordinated Research Programme because it would be a succinct form and on a common

System to forecast health effects in order to determine necessary counter-measures in case an accidental atmospheric release

International Nuclear Information System (INIS)

Merchant, T.E.; Parmentier, N.

1985-01-01

In most accident situations involving radioactivity, the required data are the quantitative evaluation of the relevant constituents of the release and the dose factors applicable for these constituents. In the problem of an atmospheric release of radioactivity a third group of data also comes into play, the meteorological conditions at the site and time of the accident. The solution to this problem is the construction of a computer code which, by employing acquired compositions of the release as well as physical accident conditions (at the time of the incident), can be effectively run to calculate and present useful dosimetric data. To meet this need, an interactive computer program has been constructed by the Institut de Protection et de Surete Nucleaire of the Commissariat a l'Energie Atomique which calculates the gamut of dosimetric and statistical information for a region of accidental radiological concern. Application of the program is such that it outputs dosimetric information and other important data in a form independent of the site under consideration, allowing, at the same time, the computation of the same information for areas where demographics show them to be of the highest radiological concern. All this is done after requiring minimal user input

Sellafield (release of radioactivity)

Energy Technology Data Exchange (ETDEWEB)

Cunningham, J; Goodlad, A; Morris, M

1986-02-06

A government statement is reported, about the release of plutonium nitrate at the Sellafield site of British Nuclear Fuels plc on 5 February 1986. Matters raised included: details of accident; personnel monitoring; whether radioactive material was released from the site; need for public acceptance of BNFL activities; whether plant should be closed; need to reduce level of radioactive effluent; number of incidents at the plant.

Deposition of radionuclides and their subsequent relocation in the environment following an accidental release to the atmosphere

International Nuclear Information System (INIS)

Underwood, B.Y.; Roed, J.; Paretzke, H.G.

1993-01-01

The objective of the project is to improve, as necessary, the models and parameterizations used in estimating the intensity and spatial distribution of deposited activity, and the total health/economic impact of such deposits in assessments of the consequences of accidental releases of radioactivity. The study comprises the influence of various weather conditions on deposition; the resuspension of deposited 137 Cs activity; the weathering of deposits in urban and rural environments; the ultimate fate and dosimetric impact of radionuclides carried by urban run-off water; the impact of the atmosphere's dispersion capabilities. Objectives and results of the four contributions to the project for the reporting period are presented. (R.P.) 5 refs., 4 figs., 1 tab

Region study of the impact of an accidental radioactive pollution on the corn of winter

International Nuclear Information System (INIS)

Delboe, A.; Mercat-Rommens, C.

2005-01-01

The goal of this study is to evaluate the sensitivity of corn of winter with respect to an accidental release of radioactivity. We want to know if a uniform and specific deposit would involve the same contamination on the scale of the whole territory. the study was based on the equations of the A.S.T.R.A.L. model which makes it possible to evaluate the transfer of the radionuclides in the terrestrial food chain following an accidental atmospheric emission. The parameter of A.S.T.R.A.L. on which the study concentrated is the factor of transfer of the radioactivity of the air to the grain. This factor depends on the parameters of captation and translocation, since harvest is contaminated when the radionuclides deposited on the leaves are assimilated and transported towards the grain. Methodology thus consisted in regionalizing these two parameters. for that, software S.T.I.C.S. (multidisciplinary simulator for standard cultures) developed by the I.N.R.A. of Avignon was used. This model proposes a daily follow-up of the foliar index, as well as the dates of occurrence of the agronomic stages of corn. These variables were correlated with captation and translocation. The outputs of the simulations carried out on 12 climates and 2 varieties made it possible to express the parameters of captation and translocation according to the typology of A.S.T.R.A.L., i e according to the time deposit-harvest. Then, these values were compared with bibliographical data and with data issued from I.R.S.N. programs R.E.S.S.A.C. and R.A.D.E.M.I.C.. (authors)

Off-gases cleaning and release from a radioactive waste incinerator protection and safety aspects

International Nuclear Information System (INIS)

Caramelle, D.; Chevalier, G.

1985-01-01

The function of an off-gas cleaning and release installation being environmental protection, the means allowing the installation operation and the quality control of this function must be available. The chief risk then in normal operation is occupational exposure in the vicinity of the points of radioactive products accumulation. The accidental risks are mainly related to an outage of the installation, or a tightness failure resulting from either internal perturbation (filter tear, exhauster failure, washing-column clogging) or external incidents (electricity cut off, furnace disarrangement, fire or explosion in the building, etc.). (orig.)

Method and apparatus for controlling accidental releases of tritium

International Nuclear Information System (INIS)

Galloway, T.R.

1980-01-01

An improvement in a tritium control system based on a catalytic oxidation reactor is provided wherein accidental releases of tritium into room air are controlled by flooding the catalytic oxidation reactor with hydrogen when the tritium concentration in the room air exceeds a specified limit. The sudden flooding with hydrogen heats the catalyst to a high temperature within seconds, thereby greatly increasing the catalytic oxidation rate of tritium to tritiated water vapor. Thus, the catalyst is heated only when needed. In addition to the heating effect, the hydrogen flow also swamps the tritium and further reduces the tritium release

Method and apparatus for controlling accidental releases of tritium

Science.gov (United States)

Galloway, Terry R. [Berkeley, CA

1980-04-01

An improvement in a tritium control system based on a catalytic oxidation reactor wherein accidental releases of tritium into room air are controlled by flooding the catalytic oxidation reactor with hydrogen when the tritium concentration in the room air exceeds a specified limit. The sudden flooding with hydrogen heats the catalyst to a high temperature within seconds, thereby greatly increasing the catalytic oxidation rate of tritium to tritiated water vapor. Thus, the catalyst is heated only when needed. In addition to the heating effect, the hydrogen flow also swamps the tritium and further reduces the tritium release.

Accidental releases of radionuclides: a preliminary study of the consequences of land contamination

International Nuclear Information System (INIS)

Simmonds, J.R.; Haywood, S.M.; Linsley, G.S.

1982-10-01

The long term consequences of land contamination from accidental releases of activity from thermal reactors are examined. The radiological consequences are assessed using an analysis of the exposure of individuals and the population to ground deposits of the radionuclides released. The contribution of the different nuclides in the release by their various exposure routes to the irradiation of man are calculated as a function of time after release and the most radiologically important are identified. A preliminary assessment is made of off-site economic and social consequences of accidental releases by estimating the areas of land which would be affected by the introduction of countermeasures to control individual radiation exposure due to external irradiation from ground deposits (relocation of populations), and the intake of radionuclides contained in locally produced foodstuffs (restrictions on food production). The areas where administrative controls would be necessary decline in size with time after the release; estimates are made of this time-dependent behaviour using dynamic environmental transfer models. Finally, the collective doses saved by the introduction of countermeasures are estimated using population and agricultural distribution data for a rural location in the United Kingdom. (author)

The Bulgarian Emergency Response System for dose assessment in the early stage of accidental releases to the atmosphere

International Nuclear Information System (INIS)

Syrakov, D.; Veleva, B.; Prodanova, M.; Popova, T.; Kolarova, M.

2009-01-01

The Bulgarian Emergency Response System (BERS) is being developed in the Bulgarian National Institute of Meteorology and Hydrology since 1994. BERS is based on numerical weather forecast meteorological information and a numerical long-range dispersion model accounting for the transport, dispersion, chemical and radioactive transformations of pollutants. In the present paper, the further development of this system for a mixture of radioactive gaseous and aerosol pollutants is described. The basic module for the BERS, the numerical dispersion model EMAP, is upgraded with a 'dose calculation block'. Two scenarios for hypothetical accidental atmospheric releases from two NPPs, one in Western, and the other in Eastern Europe, are numerically simulated. The effective doses from external irradiation, from air submersion and ground shinning, effective dose from inhalation and absorbed dose by thyroid gland formed by 37 different radionuclides, significant for the early stage of a nuclear accident, are calculated as dose fields for both case studies and discussed

Complete release from regulatory control via the density of radioactive contamination of soil of the Chornobyl exclusion zone

International Nuclear Information System (INIS)

Bondarenko, Oleg; Fadeev, Mykhaylo; Kireev, Serhiy; Proskura, Mykola

2008-01-01

Full text: In this work a general procedure of establishment the criterion of complete release from regulatory control via the density of radioactive contamination of soil of alone areas of the Chornobyl exclusion zone is represented by the following three stages, namely: 1) Justification of the dose criterion of complete release by applying the fundamental approaches of regulating the prolonged exposure of the public on a basement of ICRP Publication No. 82; 2) Justification of a procedure for establishment of dose constraint through evaluation of the statistical distribution of a controlled radiation value through determination of the high boundary of the confidence interval; 3) Generalization of conversion coefficients (via the density of radioactive contamination of soil) and coverage coefficients for the dose forming factors of the public (inhalation intake of transuranium radionuclides both at natural and technogenic dust resuspension, peroral intake of 137 Cs and 90 Sr via food stuff, external exposure from 137 Cs); on a basis of these coefficients average doses and dose constraint of a critical group of the public are calculated. As it is shown in the work, the generalized criterion of complete release from regulatory control via the density of radioactive contamination of soil of the Chornobyl exclusion zone can be defined by dividing the recommended ICRP dose clearance level for situation of the post-accidental prolonged exposure of a critical group of the public, namely, 0.3 mSv·year -1 to the dose conversion coefficient (i.e. transfer from the superficial soil contamination of radioactivity to the dose constraint for the Chornobyl exclusion zone), namely, 12.9 μSv·year -1 /((kBq·M -2 ). Thus, a level of the density of radioactive contamination of soil, that provides the complete release from regulatory control makes 23.3 kBq·M -2 . For completion of the work on justification of the criterion of complete territory release in the conditions of

The influence of the physico-chemical form of the aerosol on the radiological consequences of notional accidental releases of radioactivity from a fast breeder reactor

International Nuclear Information System (INIS)

Kelly, G.N.; Jones, J.A.; Simmonds, J.R.

1979-01-01

The radiological consequences of a wide range of notional accidental releases from a 1300 MW(e) LMFBR (Liquid Metal-cooled Fast Breeder Reactor) were assessed in a study published by the National Radiological Protection Board (NRPB) in 1977. In that study representative values were in general adopted for each of the important parameters while recognising that in reality they could vary considerably. The present study is concerned with the sensitivity of the predicted consequences to the physico-chemical form of the released aerosol. Of particular interest is the importance of a mixed sodium-transuranium element aerosol which may be formed in accidental releases of activity from sodium cooled FBRs. Two significant findings emerge from the study. First the predicted consequences in general are relatively insensitive to the range of physico-chemical forms analysed. For generic assessments therefore it is sufficient to assume the properties of the aerosol adopted in the initial study (1 μm AMAD and each element in the oxide form); the exception concerns the estimation of the incidence of early morbidity, and to a lesser extent early mortality, but only for a limited range of release composition. The second finding is that the radiological consequences are not, contrary to what might have been expected, significantly increased for the release of a mixed sodium-element aerosol

Methodology for assessing the radiological consequences of radioactive releases from the BPX Facility at PPPL

International Nuclear Information System (INIS)

McKenzie-Carter, M.A.; Lyon, R.E.; Rope, S.K.

1991-04-01

This report contains information to support the Environmental Assessment for the Burning Plasma Experiment (BPX) Project proposed for the Princeton Plasma Physics Laboratory (PPPL). The assumptions and methodology used to assess the impact to members of the public from operational and accidental releases of radioactive material from the proposed BPX during the operational period of the project are described. A description of the tracer release tests conducted at PPPL by NOAA is included; dispersion values from these tests are used in the dose calculations. Radiological releases, doses, and resulting health risks are calculated and summarized. The computer code AIRDOS- EPA, which is part of the computer code system CAP-88, is used to calculate the individual and population doses for routine releases; FUSCRAC3 is used to calculate doses resulting from off-normal releases where direct application of the NOAA tracer test data is not practical. Where applicable, doses are compared to regulatory limits and guideline values. 48 refs., 16 tabs

COCO-1: model for assessing the cost of offsite consequences of accidental releases of radioactivity

International Nuclear Information System (INIS)

Haywood, S.M.; Robinson, C.A.; Heady, C.

1991-09-01

This report describes a new model, called COCO-1 (Cost Of Consequences Offsite), for assessing the offsite economic consequences of an accident involving the release of radioactive material. The costs calculated are a measure of the benefit foregone as a result of the accident, and in addition to tangible monetary costs the model attempts to include costs arising from the effect of the accident on individuals, for instance the disruption caused by the loss of homes. The approach has limitations, which are discussed, but offers a broadly applicable and robust technique for estimating the economic impact of most accidents. (author)

Sensitivity study of the Continuous Release Dispersion Model (CRDM) for radioactive pollutants

International Nuclear Information System (INIS)

Camacho, F.

1987-08-01

The Continuous Release Dispersion Model (CRDM) is used to calculate spatial distribution of pollutants and their radiation doses in the event of accidental releases of radioactive material from Nuclear Generation Stations. A sensitivity analysis of the CRDM was carried out to develop a method for quantifying the expected output uncertainty due to inaccuracies and uncertainties in the input values. A simulation approach was used to explore the behaviour of the sensitivity functions. It was found that the most sensitive variable is wind speed, the least sensitive is the ambient temperature, and that largest values of normalized concentrations are likely to occur for small values of wind speed and highly stable atmospheric conditions. It was also shown that an error between 10% and 25% should be expected in the output values for a 1% overall error in the input values, and this factor could be much larger in certain situations

An advanced model for spreading and evaporation of accidentally released hazardous liquids on land

NARCIS (Netherlands)

Trijssenaar-Buhre, I.J.M.; Sterkenburg, R.P.; Wijnant-Timmerman, S.I.

2009-01-01

Pool evaporation modelling is an important element in consequence assessment of accidentally released hazardous liquids. The evaporation rate determines the amount of toxic or flammable gas released into the atmosphere and is an important factor for the size of a pool fire. In this paper a

An advanced model for spreading and evaporation of accidentally released hazardous liquids on land

NARCIS (Netherlands)

Trijssenaar-Buhre, I.J.M.; Wijnant-Timmerman, S.L.

2008-01-01

Pool evaporation modelling is an important element in consequence assessment of accidentally released hazardous liquids. The evaporation rate determines the amount of toxic or flammable gas released into the atmosphere and is an important factor for the size of a pool fire. In this paper a

PWR-GALE, Radioactive Gaseous Release and Liquid Release from PWR

International Nuclear Information System (INIS)

Chandrasekaran, T.; Lee, J.Y.; Willis, C.A.

1988-01-01

1 - Description of program or function: The PWR-GALE (Boiling Water Reactor Gaseous and Liquid Effluents) Code is a computerized mathematical model for calculating the release of radioactive material in gaseous and liquid effluents from pressurized water reactors (PWRs). The calculations are based on data generated from operating reactors, field tests, laboratory tests, and plant-specific design considerations incorporated to reduce the quantity of radioactive materials that may be released to the environment. 2 - Method of solution: GALE calculates expected releases based on 1) standardized coolant activities derived from ANS Standards 18.1 Working Group recommendations, 2) release and transport mechanisms that result in the appearance of radioactive material in liquid and gaseous waste streams, 3) plant-specific design features used to reduce the quantities of radioactive materials ultimately released to the environs, and 4) information received on the operation of nuclear power plants. 3 - Restrictions on the complexity of the problem: The liquid release portion of GALE uses subroutines taken from the ORIGEN (CCC-217) to calculate radionuclide buildup and decay during collection, processing, and storage of liquid radwaste. Memory requirements for this part of the program are determined by the large nuclear data base accessed by these subroutines

The control of water radioactivity

International Nuclear Information System (INIS)

Bovard, P.; Graubey, A.

1962-01-01

This report presents the different apparatuses and devices used to control and adjust routine releases, to detect accidental pollutions, and to identify the origins of an increased radioactivity. The objective is to perform permanent and continuous sampling and measurement. Samplers and measurement devices (Geiger probes, resin-based integrators, dry aerosol radioactivity recorders and dry sample radioactivity recorders) are presented. Water control stations are presented: these stations are either fixed, or mobile or floating

A 'Puff' dispersion model for routine and accidental releases

International Nuclear Information System (INIS)

Grsic, Z.; Rajkovic, B.; Milutinovic, P.

1999-01-01

A Puff dispersion model for accidental or routine releases is presented. This model was used as a constitutive part of an automatic meteorological station.All measured quantities are continuously displayed on PC monitor in a digital and graphical form, they are averaging every 10 minutes and sending to the civil information center of Belgrade. In the paper simulation of a pollutant plume dispersion from The oil refinery 'Pancevo', on April 18 th 1999 is presented. (author)

Isopleths of surface concentration and surface exposure rate due to a radioactive cloud released from a stack

International Nuclear Information System (INIS)

Kobayashi, Hideo; Yabuta, Hajimu; Katagiri, Hiroshi; Obata, Kazuichi; Kokubu, Morinobu

1982-03-01

Various calculations are made to estimate the distributions of concentration and γ-exposure rate due to a radioactive cloud released from a point source to the atmosphere. In this report, the isopleths of concentration and γ-exposure rate which were calculated are given in graphs to enable rapid prediction of the influence of released radioactive material in the emergency situation. Recently there are facilities which are equipped with a system to display the calculation results on CRT; but such practice is rather rare. By placing the calculated isopleths of reduction scale 1/25000 or 1/50000 on the usual map, any facilities without the CRT system can readily estimate the influence of an accidental release. The graphs of isopleths are given with the release height (11 values of 0 to 200 m at about 20 m intervals) and the atmospheric stability (6 classes) as parameters. Calculations of γ-exposure rates were made using the computer code GAMPUL developed by T. Hayashi and T. Shiraishi. In the calculation of radioactive concentrations and γ-exposure rates, the vertical diffusion depths, σsub(z), exceeding 1000 m are taken to be 1000 m according to the Meteorological Guide for the Safety Analysis of Power Reactor (J.AEC). The comparison between with and without this limitation in σsub(z) is made in the case of downwind axial surface distributions. (author)

The use of consequence modelling in assessing accidental releases of activity

International Nuclear Information System (INIS)

Clarke, R.H.; Hemming, C.R.; Kelly, G.N.

1982-01-01

The radiological consequences of an accidental release can be expressed as the number of health effects in the exposed population and its descendents, and the economic and social implications that may result from restrictions placed on the consumption of foodstuffs, or on the occupation of domestic and commercial premises. For any given release of activity there will be a probability distribution of consequences which will depend on the meteorological characteristics and demographic data particular to the release location. The characteristics of this distribution should be important in reaching judgements on the acceptability of a given site or design. The relative importance of the different endpoints is analysed and the influence of the release location on the resulting distribution is considered. (author)

Emergency response capability for pollutant releases to streams and rivers

International Nuclear Information System (INIS)

Buckner, M.R.; Hayes, D.W.; Watts, J.R.

1975-01-01

Stream-river models have been developed which provide an accurate prediction of normal and accidental pollutant releases to streams and rivers. Stream parameters are being developed for the Savannah River Plant streams and the Savannah River to allow quick response in case of an accidental release of radioactive material. These data are stored on permanent disk storage for quick access via the JOSHUA operating system. This system provides an efficient and flexible emergency response capability for pollutant releases to streams and rivers

Accidental Continuous Releases from Coal Processing in Semi-Confined Environment

Directory of Open Access Journals (Sweden)

Bruno Fabiano

2013-09-01

Full Text Available Notwithstanding the enforcement of ATEX EU Directives (94/9/EC of 23 March 1994 and safety management system application, explosions in the coal sector still claim lives and cause huge economic losses. Even a consolidated activity like coke dry distillation allows the opportunity of preventing explosion risk connected to fugitive emissions of coke oven gas. Considering accidental releases under semi-confined conditions, a simplified mathematical approach to the maximum allowed gaseous build-up is developed on the basis of the intrinsic hazards of the released compound. The results will help identifying and assessing low rate release consequences therefore to set-up appropriate prevention and control measures. The developed methodology was tested at the real-scale and validated by numerical computational fluid dynamics (CFD simulations showing the effectiveness of the methodology to evaluate and mitigate the risk connected to confined hazardous releases.

Contaminative Influence of Beef Due to the Inhalation of Air and the Ingestion of Soil of Livestock from an Acute Release of Radioactive Materials

International Nuclear Information System (INIS)

Hwang, Won Tae; Kim, Eun Han; Suh, Kyung Suk; Jeong, Hyo Jeon; Han, Moon Hee

2004-01-01

The contaminative influence of beef due to the inhalation of air and the ingestion of soil of livestock, both of which are dealt with as minor contaminative pathways in most radioecological models but may not be neglected, was comprehensively investigated with the improvement of the Korean food chain model DYNACON. As the results, it was found that both pathways can not be neglected at all in the contamination of beef in the case of an accidental release during the non-grazing period of livestock. The ingestion of soil was more influential in the contamination of beef than the inhalation of air over most time following an release. If precipitation is encountered during an accidental release, contaminative influence due to the ingestion of soil was far greater compared with the cases of no precipitation. This fact was more distinct for a long-lived radionuclide 137 Cs than a short-lived radionuclide '1 31 I (elemental iodine). Compared with the results for milk performed prior to this study, the contaminative pathways due to the inhalation of air and the ingestion of soil were more important in beef because of longer biological half-lives. On the other hand, in the case of an accidental release during the grazing period of livestock, radioactive contamination due to the ingestion of pasture was dominant irrespective of the existence of precipitation during an accidental release. It means that contaminative influence due to the inhalation of air and the ingestion of soil is negligible, like the cases of milk.

NRC's rulemaking to require materials licensees to be financially responsible for cleanup of accidental releases

International Nuclear Information System (INIS)

Seeman, M.J.

1987-01-01

On June 7, 1985, the US Nuclear Regulatory Commission (NRC) published an advance notice of proposed rulemaking (ANPRM) in the Federal Register to address funding for cleanup of accidents and unexpected decontamination by certain materials licensees. The NRC asked for public comment to help them determine whether to amend its regulations to require certain materials and fuel cycle licensees to demonstrate that they possess adequate financial means to pay for cleanup of accidental releases of radioactive materials. If licensees lack adequate financial resources and funds are to available for prompt cleanup, the consequences could be potentially significant for the public, the licencee and the federal government. The purpose of this paper is to explain the purpose and scope of the Commission's proposed regulatory action, as well as describing several accidents that made the Commission consider this action. Additionally, the paper will address other regulatory precedents. Finally, the paper will conclude by generally characterizing the public comments and items of concern raised by commenters

Releases of radioactivity at the Savannah River Plant, 1954--1985

International Nuclear Information System (INIS)

Zeigler, C.C.; Lawrimore, I.B.

1988-07-01

Radioactive releases from Savannah River Plant (SRP) facilities to air, water and earthen seepage basins have been monitored and tabulated throughout the history of the site. The purpose of this report is to provide a source of data on routine releases of radioactivity to air, water and seepage basins that can be used for analyses of trends, environmental impact, etc. As used in this report, routine radioactive releases means radioactive materials that are released through established effluents from process facilities. This report provides a summary of radioactive releases that inflects the release values contained m records and documents from startup through 1985

The contribution of the CSNI Principal Working Group on Confinement of Accidental Radioactive Releases to the technical consensus and spreading of knowledge on severe accidents

International Nuclear Information System (INIS)

De Boeck, B.; Royen, J.

1999-01-01

The Nuclear Energy Agency (NEA) Committee on the Safety of Nuclear Installations (CSNI) is an international committee made up of scientists and engineers. It was set up 1973 to develop and co-ordinate the activities of the NEA concerning the technical aspects of the design, construction and operation of nuclear installations insofar as they affect the safety of such installations. The Committee's purpose is to foster international cooperation in nuclear safety amongst the Member countries. Five Principal Working Groups (PWG) operate under the leadership of CSNI. PWG4 is named 'Confinement of Accidental Radioactive Releases' and its main activities are State of the Art Reports, International Standard Problem exercises, Specialist Meetings and Technical Opinion Papers. Together with other groups of experts involved in severe accident work, PWG4 has strongly contributed to the understanding of phenomena and the development of the knowledge base in that area, to the resolution of technical issues, and to the dissemination of the results. Taking examples from the products of the work of PWG4, the paper shows how this working group fosters international co-operation in the area of severe accidents and their management, and contributes to the development of a technical consensus. (author)

Modelling accidental releases of tritium in the environment: application as an excel spreadsheet

International Nuclear Information System (INIS)

Le Dizes, S.; Tamponnet, C.

2004-01-01

An application as an Excel spreadsheet of the simplified modelling approach of tritium transfer in the environment developed by Tamponnet (2002) is presented. Based on the use of growth models of biological systems (plants, animals, etc.), the two-pool model (organic tritium and tritiated water) that was developed estimates the concentration of tritium within the different compartments of the food chain and in fine the dose to man by ingestion in the case of a chronic or accidental release of tritium in a river or the atmosphere. Data and knowledge have been implemented on Excel using the object-oriented programming language VisualBasic (Microsoft Visual Basic 6.0). The structure of the conceptual model and the Excel sheet are first briefly exposed. A numerical application of the model under a scenario of an accidental release of tritium in the atmosphere is then presented. Simulation results and perspectives are discussed. (author)

Compilation of documented computer codes applicable to environmental assessment of radioactivity releases

International Nuclear Information System (INIS)

Hoffman, F.O.; Miller, C.W.; Shaeffer, D.L.; Garten, C.T. Jr.; Shor, R.W.; Ensminger, J.T.

1977-04-01

The objective of this paper is to present a compilation of computer codes for the assessment of accidental or routine releases of radioactivity to the environment from nuclear power facilities. The capabilities of 83 computer codes in the areas of environmental transport and radiation dosimetry are summarized in tabular form. This preliminary analysis clearly indicates that the initial efforts in assessment methodology development have concentrated on atmospheric dispersion, external dosimetry, and internal dosimetry via inhalation. The incorporation of terrestrial and aquatic food chain pathways has been a more recent development and reflects the current requirements of environmental legislation and the needs of regulatory agencies. The characteristics of the conceptual models employed by these codes are reviewed. The appendixes include abstracts of the codes and indexes by author, key words, publication description, and title

Radioactive iodine releases from nuclear power plant, (2)

International Nuclear Information System (INIS)

Naritomi, Mitsuo

1974-01-01

Internal radiation dose through the respiratory intake of fission products is predominantly due to radioactive iodine not only at the time of reactor accidents but also in normal operation of nuclear facilities. Technological studies in this field have thus been quite active to this day. With the rapid advance of nuclear power generation in recent years, the efforts to reduce environmental release of radioactive iodine and to enhance environmental safety are all the more emphasized. Experiences in the Japan Atomic Energy Research Institute during past about six years are described concerning the radioactive iodine release to the atmosphere in 131 I production and the measures taken to reduce the release. Then, problems are expounded regarding the radioactive iodine release at the time of reactor accidents and in spent fuel reprocessing. (Mori, K.)

MARC - the NRPB methodology for assessing radiological consequences of accidental releases of activity

International Nuclear Information System (INIS)

Clarke, R.H.; Kelly, G.N.

1981-12-01

The National Radiological Protection Board has developed a methodology for the assessment of the public health related consequences of accidental releases of radionuclides from nuclear facilities. The methodology consists of a suite of computer programs which predict the transfer of activity from the point of release to the atmosphere through to the population. The suite of programs is entitled MARC; Methodology for Assessing Radiological Consequences. This report describes the overall framework and philosophy utilised within MARC. (author)

On-site radioactive soil contamination at the Andreeva Bay shore technical base, Northwest Russia

NARCIS (Netherlands)

Reistad, O.; Dowdall, M.; Selnaes, O. G.; Standring, W. J. F.; Hustveit, S.; Steenhuisen, F.; Sorlie, A.

The radioactive waste (RAW) storage site at Andreeva Bay in the Russian Northwest has experienced radioactive contamination both as a result of activities carried out at the site and due to incidents that have occurred there in the past such as accidental releases of radioactive materials. The site

Radiological testing of products containing radioactivity

International Nuclear Information System (INIS)

Dixon, D.W.; Knight, A.

1980-01-01

Consumer products containing radioactive substances are tested by NRPB to determine how much radioactive material is likely to be released from a product if it is misused or accidentally damaged. Such testing is briefly described with particular reference to ionisation chamber smoke detectors, liquid crystal display watches illuminated with gaseous tritium light sources and anti-static brushes containing polonium-210 in the form of ceramic microspheres. (U.K.)

Control of accidental releases of hydrogen selenide in vented storage cabinets

Science.gov (United States)

Fthenakis, V. M.; Moskowitz, P. D.; Sproull, R. D.

1988-07-01

Highly toxic hydrogen selenide and hydrogen sulfide gases are used in the production of copper-indium-diselenide photovoltaic cells by reactive sputtering. In the event of an accident, these gases may be released to the atmosphere and pose hazards to public and occupational safety and health. This paper outlines an approach for designing systems for the control of these releases given the uncertainty in release conditions and lack of data on the chemical systems involved. Accidental releases of these gases in storage cabinets can be controlled by either a venturi and packed-bed scrubber and carbon adsorption bed, or containment scrubbing equipment followed by carbon adsorption. These systems can effectively reduce toxic gas emissions to levels needed to protect public health. The costs of these controls (˜0.012/Wp) are samll in comparison with current (˜6/Wp) and projected (˜I/Wp) production costs.

A comparison of alternative methods of calculating complementary cumulative distribution functions of health effects following an atmospheric radioactive release

International Nuclear Information System (INIS)

Ponting, A.C.; Nair, S.

1984-04-01

A concept extensively used in studying the consequences of accidental atmospheric radioactive releases is that of the Complementary Cumulative Distribution Function, CCDF. Various methods of calculating CCDFs have been developed with particular applications in putting degraded core accidents in perspective and in identifying release sequences leading to high risks. This note compares three methods with specific reference to their accuracy and computational efficiency. For two of the methods (that used in the US Reactor Safety Study code CRAC2 and extended version of that method), the effects of varying the sector width and considering site-specific population distributions have been determined. For the third method it is only necessary to consider the effects of site-specific population distributions. (author)

The radiological consequences of notional accidental releases of radioactivity from fast breeder reactors: sensitivity of the incidence of early effects to the duration

International Nuclear Information System (INIS)

Hemming, C.R.; Hallam, J.; Kelly, G.N.

1979-12-01

The radiological consequences of a wide range of notional accidental releases from a 1300 MW(e) LMFBR were assessed in a study published in 1977 (NRPB-R53). In that study representative values were in general adopted for each of the important parameters while recognising that in reality they could vary considerably. In this study the sensitivity of the predicted incidence of early effects to the release duration, in so far as it affects the crosswind spread of the activity, is investigated. Two situations are considered; a short release in which the crosswind distribution of the activity is assumed to be Gaussian and a more prolonged release (as modelled in the initial study) in which the crosswind distribution of activity is assumed uniform over a 30 0 sector. For the particular conditions and population distributions considered, the incidence of early effects is greater for the short compared with the more prolonged release. The size of the increase depends upon the radionuclide composition, the magnitude of the release, the distribution of the exposed population, and the prevailing meteorological conditions, but in general the increase is not large. This relatively limited sensitivity indicates that the results obtained in the initial study can be assumed, to a good approximation, to be applicable irrespective of the release duration. (author)

User's guide for the KBERT 1.0 code: For the knowledge-based estimation of hazards of radioactive material releases from DOE nuclear facilities

International Nuclear Information System (INIS)

Browitt, D.S.; Washington, K.E.; Powers, D.A.

1995-07-01

The possibility of worker exposure to radioactive materials during accidents at nuclear facilities is a principal concern of the DOE. The KBERT software has been developed at Sandia National Laboratories under DOE support to address this issue by assisting in the estimation of risks posed by accidents at chemical and nuclear facilities. KBERT is an acronym for Knowledge-Based system for Estimating hazards of Radioactive material release Transients. The current prototype version of KBERT focuses on calculation of doses and consequences to in-facility workers due to accidental releases of radioactivity. This report gives detailed instructions on how a user who is familiar with the design, layout and potential hazards of a facility can use KBERT to assess the risks to workers in that facility. KBERT is a tool that allows a user to simulate possible accidents and observe the predicted consequences. Potential applications of KBERT include the evaluation of the efficacy of evacuation practices, worker shielding, personal protection equipment and the containment of hazardous materials

Fact Sheet: Clean Air Act Section 112(r): Accidental Release Prevention / Risk Management Plan Rule

Science.gov (United States)

EPA is required to publish regulations and guidance for chemical accident prevention at facilities that pose the greatest risk of harm from accidental releases of regulated flammable and toxic substances above threshold quantities.

Report of the first research co-ordination meeting on the co-ordinated research programme: Development and selection of analytical techniques for measuring accidentally released radionuclides in environment

International Nuclear Information System (INIS)

2001-01-01

The participants at the second Research Co-ordination Meeting (Vienna, 12-16 August 1991) of the CRP on 'Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples', recommended that a new CRP be established. The current CRP on 'Development and Selection of Analytical Techniques and Procedures for Measuring Accidentally Released Radionuclides in Environment' was established based on this recommendation. The objectives of this CRP are to conduct research and development on applicable methodologies for response to accidental releases, and to improve and maintain the capabilities of the network of laboratories and provide training of individuals within member states. Thus, the CRP serves as a vehicle to maintain contact within the network of laboratories, while developing and transferring analytical techniques and procedures for measuring accidentally released radioactivity. The purpose of the Research Co-ordination Meeting is to discuss the proposed research programs, the status to date and the work planned for the duration of the CRP. The meeting also provides the opportunity for the CRP participants to exchange ideas and possibly develop collaborations in their research. The members of the CRP also need to discuss issues related to the previous CRP on Rapid methods. These include: the preparation of the final report of the previous CRP, the preparation of an addendum to TRS-295 and the ultimate revision or updating of TRS-295. Finally, it is intended that the members of the CRP should discuss the mandate and scope of work of the network of analytical laboratories and the steps needed to firmly establish this network

Toxic vapor concentrations in the control room following a postulated accidental release

International Nuclear Information System (INIS)

Wing, J.

1979-05-01

An acceptable method is presented for calculating the vapor concentrations in a control room as a function of time after a postulated accidental release. Included are the mathematical formulas for computing the rates of vaporization and evaporation of liquid spills, the vapor dispersion in air, and the control room air exchange. A list of toxic chemicals and their physical properties is also given

User guide programmer's reference. NUDOS: A computer programme for assessing the consequences of airborne releases of radionuclides

International Nuclear Information System (INIS)

Grupa, J.

1996-10-01

NUDOS is a computer program that can be used to evaluate the consequences of airborne releases of radioactive materials. The consequences evaluated are individual dose and associated radiological risk, collective dose and the contamination of land. The code is capable of dealing with both routine and accidental releases. For accidental releases both deterministic and probabilistic calculations can be performed and the impact and effectiveness of emergency actions can be evaluated. (orig.)

User Guide ECOREA-RICE (version 1.0). Program for assessing the transfer of radionuclides released accidentally onto flooded rice-fields

International Nuclear Information System (INIS)

Keum, Dong Kwon; Lee, Han Soo; Choi, Hei Hu; Kang, Hee Seok; Lee, Chang Woo

2004-05-01

The computer code ECOREA-RICE is a dynamic compartment model that is specially designed for estimating the transfer of radionuclides deposited onto flooded rice-fields after an accidental release. The model consists of six independent compartments including rice-body, grain, surface water, root-zone soil, fixed soil and deep soil, and takes into account the transfer processes including radioactive decay, percolation, leaching, shoot-base absorption, root-uptake, weathering, translocation, fixation in soil by adsorption and desorption, and soil-mixing by plowing. The rate of the change of radioactivity in compartments is expressed by a set of the first order ordinary differential equations, which are solved by the fourth order Runge-Kutta algorithm. Input to the program includes the deposition date, transplanting date, ear emergence date, harvest date, soil data, the biomass data of rice-plant, and rate constants associated with transfer processes. Output includes the list of input data, the activity of radionuclides in compartment, the rate constant, and the transfer factor of rice-body and grain with time

Modelling accidental releases of carbon 14 in the environment: application as an excel spreadsheet

International Nuclear Information System (INIS)

Le Dizes, S.; Tamponnet, C.

2004-01-01

An application as an Excel spreadsheet of the simplified modelling approach of carbon 14 transfer in the environment developed by Tamponnet (2002) is presented. Based on the use of growth models of biological systems (plants, animals, etc.), the one-pool model (organic carbon) that was developed estimates the concentration of carbon 14 within the different compartments of the food chain and in fine the dose to man by ingestion in the case of a chronic or accidental release of carbon 14 in a river or the atmosphere. Data and knowledge have been implemented on Excel using the object-oriented programming language VisualBasic (Microsoft Visual Basic 6.0). The structure of the conceptual model and the Excel sheet are first briefly exposed. A numerical application of the model under a scenario of an accidental release of carbon 14 in the atmosphere is then presented. Simulation results and perspectives are discussed. (author)

Commitment of involved actors in the preparation of accidental and post-accident situations: European experiments

International Nuclear Information System (INIS)

Schneider, Th.

2010-01-01

The author briefly describes some approaches developed within the EURANOS European research programme between 2004 and 2009 which aims at promoting the building up of a European network (NERIS) for the management of nuclear accidental and post-accident situations. Notably, he comments the experiment which took place in the Montbeliard district where two types of radiological events have been modelled and simulated: an accident in the Fessenheim nuclear power plant with two scenarios of release, and a transportation accident with a release of radioactive caesium 137. He also evokes the Norwegian experience and some other actions in Finland, Great-Britain, Spain and Slovakia where reflections on the management of accidental and post-accident situations or crisis exercises have been organized

Radioactive release during nuclear accidents in Chernobyl and Fukushima

Science.gov (United States)

Nur Ain Sulaiman, Siti; Mohamed, Faizal; Rahim, Ahmad Nabil Ab

2018-01-01

Nuclear accidents that occurred in Chernobyl and Fukushima have initiated many research interests to understand the cause and mechanism of radioactive release within reactor compound and to the environment. Common types of radionuclide release are the fission products from the irradiated fuel rod itself. In case of nuclear accident, the focus of monitoring will be mostly on the release of noble gases, I-131 and Cs-137. As these are the only accidents have been rated within International Nuclear Events Scale (INES) Level 7, the radioactive release to the environment was one of the critical insights to be monitored. It was estimated that the release of radioactive material to the atmosphere due to Fukushima accident was approximately 10% of the Chernobyl accident. By referring to the previous reports using computational code systems to model the release rate, the release activity of I-131 and Cs-137 in Chernobyl was significantly higher compare to Fukushima. The simulation code also showed that Chernobyl had higher release rate of both radionuclides on the day of accident. Other factors affecting the radioactive release for Fukushima and Chernobyl accidents such as the current reactor technology and safety measures are also compared for discussion.

Simulation of pulsed accidental energy release in a reactor core

International Nuclear Information System (INIS)

Ryshanskii, V.A.; Ivanov, A.G.; Uskov, A.A.

1995-01-01

At the present time the strength of the load-bearing members of VVER and fast reactors during a hypothetical accident is ordinarily investigated in model experiments [1]. A power burst during an accident is simulated by a nonnuclear exothermal reaction in water, which simulates the coolant and fills the model. The problem is to make the correct choice of the simulator of the accidental energy burst as an effective (i.e., sufficiently high working capacity) source of dangerous loads, corresponding to the conditions of an accident. What factors and parameters determine the energy release? The answers to these questions are contradictory

Report on radioactivity monitoring during the visits of nuclear powered ships

International Nuclear Information System (INIS)

1977-01-01

The National Radiation Laboratory of the Department of Health is required under NZAEC Report 500 'New Zealand Code for Nuclear Powered Shipping' (June 1976) to monitor for release of radioactivity during the stay of such a ship in a New Zealand port and to provide technical assistance to Civil Defence organisations charged with dealing with any emergency arising from an accidental release of radioactive materials. This report outlines the activities undertaken for the two visits which took place in 1976

A computer code to estimate accidental fire and radioactive airborne releases in nuclear fuel cycle facilities: User's manual for FIRIN

International Nuclear Information System (INIS)

Chan, M.K.; Ballinger, M.Y.; Owczarski, P.C.

1989-02-01

This manual describes the technical bases and use of the computer code FIRIN. This code was developed to estimate the source term release of smoke and radioactive particles from potential fires in nuclear fuel cycle facilities. FIRIN is a product of a broader study, Fuel Cycle Accident Analysis, which Pacific Northwest Laboratory conducted for the US Nuclear Regulatory Commission. The technical bases of FIRIN consist of a nonradioactive fire source term model, compartment effects modeling, and radioactive source term models. These three elements interact with each other in the code affecting the course of the fire. This report also serves as a complete FIRIN user's manual. Included are the FIRIN code description with methods/algorithms of calculation and subroutines, code operating instructions with input requirements, and output descriptions. 40 refs., 5 figs., 31 tabs

Historical Doses from Tritiated Water and Tritiated Hydrogen Gas Released to the Atmosphere from Lawrence Livermore National Laboratory (LLNL). Part 5. Accidental Releases

Energy Technology Data Exchange (ETDEWEB)

Peterson, S

2007-08-15

Over the course of fifty-three years, LLNL had six acute releases of tritiated hydrogen gas (HT) and one acute release of tritiated water vapor (HTO) that were too large relative to the annual releases to be included as part of the annual releases from normal operations detailed in Parts 3 and 4 of the Tritium Dose Reconstruction (TDR). Sandia National Laboratories/California (SNL/CA) had one such release of HT and one of HTO. Doses to the maximally exposed individual (MEI) for these accidents have been modeled using an equation derived from the time-dependent tritium model, UFOTRI, and parameter values based on expert judgment. All of these acute releases are described in this report. Doses that could not have been exceeded from the large HT releases of 1965 and 1970 were calculated to be 43 {micro}Sv (4.3 mrem) and 120 {micro}Sv (12 mrem) to an adult, respectively. Two published sets of dose predictions for the accidental HT release in 1970 are compared with the dose predictions of this TDR. The highest predicted dose was for an acute release of HTO in 1954. For this release, the dose that could not have been exceeded was estimated to have been 2 mSv (200 mrem), although, because of the high uncertainty about the predictions, the likely dose may have been as low as 360 {micro}Sv (36 mrem) or less. The estimated maximum exposures from the accidental releases were such that no adverse health effects would be expected. Appendix A lists all accidents and large routine puff releases that have occurred at LLNL and SNL/CA between 1953 and 2005. Appendix B describes the processes unique to tritium that must be modeled after an acute release, some of the time-dependent tritium models being used today, and the results of tests of these models.

10 CFR 61.41 - Protection of the general population from releases of radioactivity.

Science.gov (United States)

2010-01-01

... radioactivity. 61.41 Section 61.41 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR... from releases of radioactivity. Concentrations of radioactive material which may be released to the... maintain releases of radioactivity in effluents to the general environment as low as is reasonably...

Discussion on the methods for calculation release limits for low-level radioactive waste

International Nuclear Information System (INIS)

Cao Fengbo; Liu Xiaochao

2012-01-01

The release request for low-level radioactive waste are briefly described in this paper. Associating with the conditions of low-level radioactive waste of some radioactive waste processing station, the methods and gist for calculating release limits for low-level radioactive waste with national release limits and annual effective dose limit for the public or the occupation are discussed. Then release limits for the low-level radioactive waste are also proposed. (authors)

Released radioactivity reducing facility

International Nuclear Information System (INIS)

Tanaka, Takeaki.

1992-01-01

Upon occurrence of a reactor accident, penetration portions of a reactor container, as a main leakage source from a reactor container, are surrounded by a plurality of gas-tight chambers, the outside of which is surrounded by highly gas-tightly buildings. Branched pipelines of an emergency gas processing system are introduced to each of the gas-tight chambers and they are joined and in communication with an emergency gas processing device. With such a constitution, radioactive materials are prevented from leaking directly from the buildings. Further, pipeline openings of the emergency gas processing facility are disposed in the plurality highly gas-tight penetration chambers. If the radioactive materials are leaked from the reactor to elevate the pressure in the penetration chambers, the radioactive materials are introduced to a filter device in the emergency gas processing facility by way of the branched pipelines, filtered and then released to the atmosphere. Accordingly, the reliability and safety of the system can be improved. (T.M.)

Region study of the impact of an accidental radioactive pollution on the corn of winter; Etude regionalisee de l'impact d'une pollution radioactive accidentelle sur le ble d'hiver

Energy Technology Data Exchange (ETDEWEB)

Delboe, A.; Mercat-Rommens, C

2005-07-01

The goal of this study is to evaluate the sensitivity of corn of winter with respect to an accidental release of radioactivity. We want to know if a uniform and specific deposit would involve the same contamination on the scale of the whole territory. the study was based on the equations of the A.S.T.R.A.L. model which makes it possible to evaluate the transfer of the radionuclides in the terrestrial food chain following an accidental atmospheric emission. The parameter of A.S.T.R.A.L. on which the study concentrated is the factor of transfer of the radioactivity of the air to the grain. This factor depends on the parameters of captation and translocation, since harvest is contaminated when the radionuclides deposited on the leaves are assimilated and transported towards the grain. Methodology thus consisted in regionalizing these two parameters. for that, software S.T.I.C.S. (multidisciplinary simulator for standard cultures) developed by the I.N.R.A. of Avignon was used. This model proposes a daily follow-up of the foliar index, as well as the dates of occurrence of the agronomic stages of corn. These variables were correlated with captation and translocation. The outputs of the simulations carried out on 12 climates and 2 varieties made it possible to express the parameters of captation and translocation according to the typology of A.S.T.R.A.L., i e according to the time deposit-harvest. Then, these values were compared with bibliographical data and with data issued from I.R.S.N. programs R.E.S.S.A.C. and R.A.D.E.M.I.C.. (authors)

Dispersion modeling of accidental releases of toxic gases - Comparison of the models and their utility for the fire brigades.

Science.gov (United States)

Stenzel, S.; Baumann-Stanzer, K.

2009-04-01

Dispersion modeling of accidental releases of toxic gases - Comparison of the models and their utility for the fire brigades. Sirma Stenzel, Kathrin Baumann-Stanzer In the case of accidental release of hazardous gases in the atmosphere, the emergency responders need a reliable and fast tool to assess the possible consequences and apply the optimal countermeasures. For hazard prediction and simulation of the hazard zones a number of air dispersion models are available. The most model packages (commercial or free of charge) include a chemical database, an intuitive graphical user interface (GUI) and automated graphical output for display the results, they are easy to use and can operate fast and effective during stress situations. The models are designed especially for analyzing different accidental toxic release scenarios ("worst-case scenarios"), preparing emergency response plans and optimal countermeasures as well as for real-time risk assessment and management. There are also possibilities for model direct coupling to automatic meteorological stations, in order to avoid uncertainties in the model output due to insufficient or incorrect meteorological data. Another key problem in coping with accidental toxic release is the relative width spectrum of regulations and values, like IDLH, ERPG, AEGL, MAK etc. and the different criteria for their application. Since the particulate emergency responders and organizations require for their purposes unequal regulations and values, it is quite difficult to predict the individual hazard areas. There are a quite number of research studies and investigations coping with the problem, anyway the end decision is up to the authorities. The research project RETOMOD (reference scenarios calculations for toxic gas releases - model systems and their utility for the fire brigade) was conducted by the Central Institute for Meteorology and Geodynamics (ZAMG) in cooperation with the Vienna fire brigade, OMV Refining & Marketing GmbH and

Forecasting consequences of accidental release: how reliable are current assessment models

International Nuclear Information System (INIS)

Rohwer, P.S.; Hoffman, F.O.; Miller, C.W.

1983-01-01

This paper focuses on uncertainties in model output used to assess accidents. We begin by reviewing the historical development of assessment models and the associated interest in uncertainties as these evolutionary processes occurred in the United States. This is followed by a description of the sources of uncertainties in assessment calculations. Types of models appropriate for assessment of accidents are identified. A summary of results from our analysis of uncertainty is provided in results obtained with current methodology for assessing routine and accidental radionuclide releases to the environment. We conclude with discussion of preferred procedures and suggested future directions to improve the state-of-the-art of radiological assessments

Dispersion modeling of accidental releases of toxic gases - utility for the fire brigades.

Science.gov (United States)

Stenzel, S.; Baumann-Stanzer, K.

2009-09-01

Several air dispersion models are available for prediction and simulation of the hazard areas associated with accidental releases of toxic gases. The most model packages (commercial or free of charge) include a chemical database, an intuitive graphical user interface (GUI) and automated graphical output for effective presentation of results. The models are designed especially for analyzing different accidental toxic release scenarios ("worst-case scenarios”), preparing emergency response plans and optimal countermeasures as well as for real-time risk assessment and management. The research project RETOMOD (reference scenarios calculations for toxic gas releases - model systems and their utility for the fire brigade) was conducted by the Central Institute for Meteorology and Geodynamics (ZAMG) in cooperation with the Viennese fire brigade, OMV Refining & Marketing GmbH and Synex Ries & Greßlehner GmbH. RETOMOD was funded by the KIRAS safety research program of the Austrian Ministry of Transport, Innovation and Technology (www.kiras.at). The main tasks of this project were 1. Sensitivity study and optimization of the meteorological input for modeling of the hazard areas (human exposure) during the accidental toxic releases. 2. Comparison of several model packages (based on reference scenarios) in order to estimate the utility for the fire brigades. For the purpose of our study the following models were tested and compared: ALOHA (Areal Location of Hazardous atmosphere, EPA), MEMPLEX (Keudel av-Technik GmbH), Trace (Safer System), Breeze (Trinity Consulting), SAM (Engineering office Lohmeyer). A set of reference scenarios for Chlorine, Ammoniac, Butane and Petrol were proceed, with the models above, in order to predict and estimate the human exposure during the event. Furthermore, the application of the observation-based analysis and forecasting system INCA, developed in the Central Institute for Meteorology and Geodynamics (ZAMG) in case of toxic release was

Estimation of the environmental or radiological impact in the event of accidental release of radionuclides in a DCLL fusion reactor; Estimacion del impacto radiologico ambiental en caso de liberacion accidental de radionucleidos en un reactor de fusion DCLL

Energy Technology Data Exchange (ETDEWEB)

Palermo, I.; Gomez Ros, J. M.; Sanz, J.; Mota, F.

2013-07-01

Tritium production and activation in the LiPb products can pose a radiological risk in the event of accidental release in a fusion reactor. Within the research programme Consolider TECNO{sub F}US (CSD2008-079) fusion technology has developed a design for a reactor with regenerative wrap with dual refrigeration (DCLL). The purpose of this communication is to present estimates of the radiological impact derived from an accidental release of radionuclides from the circuit of LiPb provinients. (Author)

Application of dynamic modeling for assessing the impact of radioactive releases to water sewer systems

International Nuclear Information System (INIS)

Sundell-Bergman, Synnove; Avila, Rodolfo; Cruz, Idalmis de la

2008-01-01

Full text: Potential radiological emergencies due to accidental or malicious acts involving nuclear materials requires tools for emergency dose assessment to help in the planning of countermeasures. In urban areas, the municipal sewage systems will receive the wastewater from households, industries and hospitals as well as the run-off water. Investigations have shown that sewage sludge is a sensitive indicator for radionuclides released from hospitals or spread via the atmosphere and thus simulation modelling of the fate of radionuclides entering sewage treatment plants via urban drainage systems could prove useful in emergency situations. A dynamic model (LUCIA) has been developed to assess the radiological consequences of non-homogenous releases of radionuclides to the sewage plants. In the first step the focussing has been on radioactive liquid releases from hospitals and the predictions show that there is a significant probability (> 0,2) that the sewage worker doses exceed 10 μSv/y while doses to farmers or fishermen (downstream plants) are marginal. Comparison of measured and estimated concentration values for iodine-131 reveal that the predictions made by LUCIA are reasonably good and fall within a factor of 2. For the purpose of emergency preparedness, scenarios have been defined and the fate of released radionuclides has been assessed. The main features of the LUCIA model will be presented and the application of the tool for emergency preparedness will be discussed. (author)

Regionalized study of the impact of an accidental radioactive pollution on a permanent meadow

International Nuclear Information System (INIS)

Durand, V.; Mercat-Rommens, C.

2006-01-01

The objective of this study consists in evaluating the sensitivity of the first part of the die grass-milk with respect to an accidental radioactive discharge. We want to know if a single uniform deposit would involve a contamination of the grazing grass identical on the scale of the own territory. The study was based on the A.S.T.R.A.L. model, a computer code developed by the I.R.S.N. which makes it possible to evaluate the transfer of the radionuclides in the terrestrial food chain following an accidental atmospheric emission. The way of transfer of A.S.T.R.A.L. on which the study focused is the transfer of the deposit to milk, via the grazing grass ingestion. The sensitivity of this way of transfer relies on several parameters: captation, yield, cows food rates and dates of setting to grass. Methodology thus consisted in regionalizing these parameters. The software S.T.I.C.S. developed by the I.N.R.A. of Avignon was then used. This model proposes a daily follow-up of the leaf area index which has been correlated with captation and with the production of fresh biomass (yield). (authors)

Monitoring of released radioactive gaseous and liquid effluent at Rokkasho Reprocessing Plant

International Nuclear Information System (INIS)

Oka, M.; Keta, S.; Nagai, S.; Kano, M.; Ishihara, N.; Moriyama, T.; Ogaki, K.; Noda, K.

2009-01-01

Rokkasho Reprocessing Plant (RRP) Rokkasho Reprocessing Plant started its active tests with spent fuel at the end of March 2006. When spent fuels are sheared and dissolved, radioactive gaseous effluent and radioactive liquid effluent such as krypton-85, tritium, etc. are released into the environment. In order to limit the public dose as low as reasonably achievable in an efficient way, RRP removes radioactive material by evaporation, rinsing, filtering, etc., and then releases it through the main stack and the sea discharge pipeline that allow to make dispersion and dilution very efficiently. Also, concerning the radioactive gaseous and liquid effluent to be released into the environment, the target values of annual release have been defined in the Safety Rule based on the estimated annual release evaluated at the safety review of RRP. By monitoring the radioactive material in gaseous exhaust and liquid effluent RRP controls it not to exceed the target values. RRP reprocessed 430 tUpr of spent fuel during Active Test (March 2006 to October 2008). In this report, we report about: The outline of gaseous and liquid effluent monitoring. The amount of radioactive gaseous and liquid effluent during the active test. The performance of removal of radioactive materials in gaseous and liquid effluents. The impact on the public from radioactive effluents during the active test. (author)

Releases of radioactive substances from Swedish nuclear power plants (RAKU)

Energy Technology Data Exchange (ETDEWEB)

Ingemansson, T.; Bergstroem, C. [ALARA Engineering AB, Skultuna (Sweden)

1997-04-01

Releases of radioactivity to air and water from Swedish nuclear power plants have been studied and compared with those from foreign reactors. Averaged over the years from commissioning of the reactors to the last year data are available, the release of radioactive noble gas from the Swedish BWRs has been about the same as from comparable foreign reactors. The oldest Swedish BWRs, Oskarshamn 1 and 2 (O1 and O2) and Ringhals 1 (R1), have simple off-gas systems with only one delay volume. All BWRs in US, Germany, Japan and Switzerland are equipped with more sophisticated off-gas systems. It can be expected that O1, O2 and R1 therefore will have the highest release of noble gas activity at an international comparison if they do not modernize their off-gas system. BWRs in US, Germany and Japan are today equipped with recombiners and with one exception also charcoal columns. Japanese BWRs report zero releases to air. Releases of radioactivity to water after commissioning was about the same for most of the studied reactors. Some of the newest German plants have had low annual releases already at commissioning. Improvements of the treatment systems at old German, Swiss and US reactors have significantly lowered the releases. For most of the Swedish plants the annual releases to water have remained at the initial level. Forsmark 3 has succeeded in decreasing the release of radionuclides to water by a factor of almost one hundred compared to other Swedish reactors. Also O3 has managed to decrease the liquid effluents. Japanese plants have zero release of radioactivity excluding tritium to water. The release of tritium is about the same for all reactors of the same type in the world. 35 refs, 31 figs, 24 tabs.

Evaluation Of Radioactivity Of Released Air During Postirradiation Examination At The RMI

International Nuclear Information System (INIS)

Prayitno, B.; Eko, Pudjadi

1998-01-01

Radioactivity evaluation of released air during post-irradiation examination at RMI has been done since january 1993 to december 1996. The released air radioactivity has been observed during post-irradiation examinations of irradiated fuels and structure materials in the hot cell. Analysis method employed has been by air sampling and measurement of the alpha and beta activities by using alpha beta aerosol LB 150 D model. Air release from RMI was sucked by using an air pump having 40 m3/hour capacity which is equipped with a 200 mm diameter filter paper. The filter paper is automatically counted by the detector of the instrument. The average of the daily maximum counting result in a month has been used as monthly data. It has been shown that there have been increase in the released air radioactivity caused by the post-irradiation examination activity. The data of the released air activity obtained have been used to calculate the radioactivity concentration and radioactivity on the soil surface based on Gauss Plumes. The calculation result have shown that the alpha and beta radioactivity concentration at stacks and on the soil surface are less then the set maximum permissible concentration (MPC)

The radiological impact on the Greater London population of postulated accidental releases from the Sizewell PWR

CERN Document Server

Kelly, G N; Charles, D; Hemming, C R

1983-01-01

This report contains an assessment of the radiological impact on the Greater London population of postulated accidental releases from the Sizewell PWR. Three of the degraded core accident releases postulated by the CEGB are analysed. The consequences, conditional upon each release, are evaluated in terms of the health impact on the exposed population and the impact of countermeasures taken to limit the exposure. Consideration is given to the risk to the Greater London population as a whole and to individuals within it. The consequences are evaluated using the NRPB code MARC (Methodology for Assessing Radiological Consequences). The results presented in this report are all conditional upon the occurrence of each release. In assessing the significance of the results, due account must be taken of the frequency with which such releases may be predicted to occur.

Comparison of numerical models for calculating dispersion from accidental releases of pollutants

Energy Technology Data Exchange (ETDEWEB)

Pepper, D W [Savannah River Lab., Aiken, SC; Cooper, R E; Baker, A J

1982-01-01

A modular, data-based system approach has been developed to facilitate computational simulation of multi-dimensional pollutant dispersion in atmospheric, steam, estuary, and groundwater applications. This system is used to assess effects of accidental releases of pollutants to the environment. Model sophistication ranges from simple statistical to complex three-dimensional numerical methods. The system used specifies desired degree of model sophistication from a terminal. The model used depends on the particular type of problem being solved, and on a basis of merit related to computer cost. The results of prediction for several model problems are presented.

Inverse modelling for real-time estimation of radiological consequences in the early stage of an accidental radioactivity release.

Science.gov (United States)

Pecha, Petr; Šmídl, Václav

2016-11-01

A stepwise sequential assimilation algorithm is proposed based on an optimisation approach for recursive parameter estimation and tracking of radioactive plume propagation in the early stage of a radiation accident. Predictions of the radiological situation in each time step of the plume propagation are driven by an existing short-term meteorological forecast and the assimilation procedure manipulates the model parameters to match the observations incoming concurrently from the terrain. Mathematically, the task is a typical ill-posed inverse problem of estimating the parameters of the release. The proposed method is designated as a stepwise re-estimation of the source term release dynamics and an improvement of several input model parameters. It results in a more precise determination of the adversely affected areas in the terrain. The nonlinear least-squares regression methodology is applied for estimation of the unknowns. The fast and adequately accurate segmented Gaussian plume model (SGPM) is used in the first stage of direct (forward) modelling. The subsequent inverse procedure infers (re-estimates) the values of important model parameters from the actual observations. Accuracy and sensitivity of the proposed method for real-time forecasting of the accident propagation is studied. First, a twin experiment generating noiseless simulated "artificial" observations is studied to verify the minimisation algorithm. Second, the impact of the measurement noise on the re-estimated source release rate is examined. In addition, the presented method can be used as a proposal for more advanced statistical techniques using, e.g., importance sampling. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effectiveness of cleanup criteria relative to an accidental nuclear release

International Nuclear Information System (INIS)

Chen, S.Y.; Yuan, Y.C.

1988-01-01

In the event of an accidental nuclear release, the associated long-term radiological risks would result primarily from ground contamination pathways. Cleanup of the contaminated ground surfaces is a necessary step toward reducing the radiological risk to the general population. Ideally, the radiological risk decreases as the level of cleanup effort increases; however, as the cleanup criterion (i.e., the required contaminant concentration after cleanup) becomes more stringent, the cleanup effort may become prohibitively costly. This study examines several factors that are important in determining the effectiveness of the cleanup criteria for selected radionuclides: (a) annual individual dose commitment (mrem/yr), (b) total population environmental dose commitment (person-rem), and (c) total area (km 2 ) requiring cleanup following an accident. To effectively protect the general population, the benefits of cleanup should be weighed against the potentially large increase in cleanup area (and the associated costs) as the cleanup criterion becomes more stringent. The effectiveness of cleanup will vary, depending largely on site-specific parameters such as population density and agricultural productivity as well as on the amount and type of radionuclide released. Determination of an optimum cleanup criterion should account for all factors, including a comprehensive cost/benefit analysis

Principles for limiting releases of radioactive effluents into the environment

International Nuclear Information System (INIS)

1986-01-01

This publication is concerned with the subject of limiting releases of radioactive effluents during normal, controlled operation of nuclear installations. It does not deal with releases from accidents where it is only possible to limit exposures by intervention. In 1978 the IAEA published guidance on the concepts and principles for use by the competent authorities in setting limits for planned releases of radioactive material into the environment (Safety Series No. 45). This publication is a complete revision of Safety Series No. 45 and its Annex

Preliminary investigations of the significance of the ingestion pathway following accidental releases with actinides

International Nuclear Information System (INIS)

Steinhauer, C.

1985-10-01

Preliminary accident consequence assessments have been performed with the computer code UFOMOD to study the significance of the ingestion pathway in accidental releases with actinides. The investigation was based on the release category K1 of the 'Risk Oriented Analysis of the SNR 300', in which a higher fraction of actinides is released than in the worst release category for an LWR. The analysis was carried out using the currently implemented food chain transport model WASH-1400/BSU and data from the dynamic model from the MARC methodology. To study the influence of the time of the accident on the food chain-related results, releases in January and July were considered by means of the MARC data. In this report the differences are presented between both food chain transport models for transuranium elements and those which are observed in the potential doses due to ingestion, the areas affected by food-bans and the late health effects when using both models and taking the influence of the season into account. (orig./HP) [de

Modelling for radiological and radioecological consequences of an accidental radionuclide release at Sea

International Nuclear Information System (INIS)

Paschoa, A.S.

1997-01-01

Full text: Scenarios concerning accidental releases of radionuclides into water bodies can be found in the open literature, mostly in connection with nuclear power plants located either onshore or inland. However, meager attention has been given to nuclear reactors used as energy sources for propulsion at sea, which are also subject to accidents. Such potential accidents may involve the loss of part of the reactor core to the surrounding water body. In addition of the initial instantaneous releases, one can estimate delayed source terms based on the rate at which radionuclides are dissolved or leached from the solidified material, like part of the core or structural materials in contact with water. Most of such solidified material might be a mixture of uranium, zirconium, iron, calcium, silica, fission and activation products, and transuranium elements as oxides, forming a glassy type solid. Transport models were used to calculate radionuclide concentrations in water resulting from short and delayed source terms. Oceanographic data used in the calculations were taken either from the open literature or from unclassified reports of the Brazilian Navy, being, however, as generic as possible. Time-dependent concentration functions for radionuclides in aquatic food following an accidental release reflect the net result of intake and elimination processes. However, to avoid the complexities of multiple parameters involved in such processes, the model accounts only for trophic transfer of radionuclides, and yet avoids the necessity of analyzing the details of each transfer step used to determine fish, crustacea, molluscs and seaweed accumulation. Swimming and other aquatic sports are not included in the model used for dose calculations because of theirs relatively low importance in comparison with the pathways concerning ingestion of aquatic food

Monitoring of the release of gaseous and aerosol-bound radioactive materials. Pt. 2

International Nuclear Information System (INIS)

1992-01-01

KTA 1503 contains requirements on technical installations and supplementary organizational measures considered necessary in order to monitor the release of gaseous and aerosol-bound radioactive materials. It consists of part 1: Monitoring of the release of radioactive materials together with stack gas during normal operation; part 2: Monitoring of the release of radioactive materials together with stack gas in the event of incidents; part 3: Monitoring of radioactive materials not released together with stack gas. The concept on which this rule is based is to ensure that in the case of incidents during which the result of effluent monitoring remains meaningful, such monitoring can be reliably performed. (orig./HSCH) [de

Partitioning of perfluorooctanesulfonate and perfluorohexanesulfonate in the aquatic environment after an accidental release of aqueous film forming foam at Schiphol Amsterdam Airport

NARCIS (Netherlands)

Kwadijk, C.J.A.F.; Kotterman, M.J.J.; Koelmans, A.A.

2014-01-01

In the summer of 2008, an accidental release of Aqueous Film Forming Foam (AFFF) took place at Schiphol Amsterdam Airport (The Netherlands). After the release, water, fish and sediment samples were collected and analyzed for perfluoroalkyl sulfonates (PFSA). In situ perfluorooctane sulfonate (PFOS)

Consequences of severe radioactive releases to Nordic Marine environment

DEFF Research Database (Denmark)

Iosjpe, M.; Isaksson, M.; Joensen, H.P.

- or minor – radioactive releases to Nordic marine environment. As a reference, the release amounts from a 3000 MWth reactor size were used. Based on source term analyses, the chosen release fractions in the study were: iodine 20% (of the total core inventory), caesium 10%, tellurium 10%, strontium 0...

International conference and workshop on modeling and mitigating the consequences of accidental releases of hazardous materials

International Nuclear Information System (INIS)

Anon.

1995-01-01

This conference was held September 26--29, 1995 in New Orleans, Louisiana. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on the consequences of accidental releases of hazardous materials. Attention is focused on air dispersion of vapors. Individual papers have been processed separately for inclusion in the appropriate data bases

Applied exposure modeling for residual radioactivity and release criteria

International Nuclear Information System (INIS)

Lee, D.W.

1989-01-01

The protection of public health and the environment from the release of materials with residual radioactivity for recycle or disposal as wastes without radioactive contents of concern presents a formidable challenge. Existing regulatory criteria are based on technical judgment concerning detectability and simple modeling. Recently, exposure modeling methodologies have been developed to provide a more consistent level of health protection. Release criteria derived from the application of exposure modeling methodologies share the same basic elements of analysis but are developed to serve a variety of purposes. Models for the support of regulations for all applications rely on conservative interpretations of generalized conditions while models developed to show compliance incorporate specific conditions not likely to be duplicated at other sites. Research models represent yet another type of modeling which strives to simulate the actual behavior of released material. In spite of these differing purposes, exposure modeling permits the application of sound and reasoned principles of radiation protection to the release of materials with residual levels of radioactivity. Examples of the similarities and differences of these models are presented and an application to the disposal of materials with residual levels of uranium contamination is discussed. 5 refs., 2 tabs

Model description. NUDOS: A computer program for assessing the consequences of airborne releases of radionuclides

International Nuclear Information System (INIS)

Poley, A.D.

1996-02-01

NUDOS is a computer program that can be used to evaluate the consequences of airborne releases of radioactive material. The consequences which can be evaluated are individual dose and associated radiological risk, collective dose and the contamination of land. The code is capable of dealing with both continuous (routine) and accidental releases. For accidental releases both deterministic and probabilistic calculations can be performed, and the impact and effectiveness of emergency actions can be evaluated. This report contains a description of the models contained in NUDOS92 and the recommended values for the input parameters of these models. Additionally, a short overview is given of the future model improvement planned for the next NUDOS-version. (orig.)

Prevention and mitigation of groundwater contamination from radioactive releases

International Nuclear Information System (INIS)

1988-10-01

This document gives basic information on potential pathways and mechanisms, by which radioactive materials from releases can reach man, and on modelling considerations to predict the behaviour of radioactive materials in the ground. The main objective is to present an overview of existing techniques for preventing the offsite releases of contaminants into the groundwater systems and techniques for mitigation of effects of such releases should they occur. The recommended techniques are fully applicable to any hazardous materials, such as organic liquids, and toxic materials or otherwise dangerous materials, the presence of which in the accessible biosphere can represent health risks as well as economic losses to the general public. 11 refs, 2 figs, 8 tabs

Environmental processes and parameters influencing the consequences of an accidental release of radioactivity weather and season

International Nuclear Information System (INIS)

Boeri, G.C.

1989-01-01

Seasonal, climatic and meteorological conditions may have a substantial influence on the physical factors involved in transport and deposition of airborne contaminants, and on the transfer and accumulation of radionuclides in terrestrial and aquatic ecosystems. As well, these environmental conditions can also have a significant influence on living habits and practices, and thus on potential radiological and economical impacts. Moreover, these conditions may affect the features and the impact of countermeasures which are adopted for the protection of the public in case of an accidental release. During a Special Session that the Committee of Radiation Protection and Public Health (CRPPH) held on the 1st-2nd September 1986 to review the radiological aspects of the Chernobyl nuclear accident, it was agreed that a consultant should prepare a report reviewing different accident consequences in a radiation protection and public health perspective, and identify the influence of such parameters as time of the year, weather and environmental conditions on the overall impact and the determination of appropriate countermeasures. A Consultant Report on this issue was prepared, by Dr. G. Boeri, and submitted to the CRPPH for review and consideration at its meeting of 22nd-24th November 1987. The CRPPH subsequently agreed that the Consultant Report should be revised and completed, taking into account comments and suggestions sent to the Secretariat and focussing especially on the effect of seasonal and weather conditions in terms of their influence on the radiological impact of an accident and on the emergency countermeasures to be taken. It was decided that the Consultant Report should be developed into an Overview Paper for a workshop on this issue to be organised by the NEA in 1988

Monitoring for radioactive materials releasing to environment in M310 reformatived nuclear power plant

International Nuclear Information System (INIS)

Yin Zhenyu; Yang Guangli; Xu Guang

2012-01-01

Airborne radioactive materials of nuclear power plant (NPP) releases to the environment from the stack of NPP. Radioactive liquid waste releases of the ocean, the fluvial and the lake through the liquid waste letdyke of NPP. Further more, a few radioactive waste may be taken out of the NPP by vehicle or personnel. For the purpose of strict management and control above-mentioned waste, we use detect equipment monitoring radioactive waste of NPP. Management and control for the releasing of radioactive material to the environment in M310 reformatived NPP is strict and safety. (authors)

Dynamic evaluation of environmental impact due to tritium accidental release from the fusion reactor.

Science.gov (United States)

Nie, Baojie; Ni, Muyi; Jiang, Jieqiong; Wu, Yican

2015-10-01

As one of the key safety issues of fusion reactors, tritium environmental impact of fusion accidents has attracted great attention. In this work, the dynamic tritium concentrations in the air and human body were evaluated on the time scale based on accidental release scenarios under the extreme environmental conditions. The radiation dose through various exposure pathways was assessed to find out the potential relationships among them. Based on this work, the limits of HT and HTO release amount for arbitrary accidents were proposed for the fusion reactor according to dose limit of ITER. The dynamic results aim to give practical guidance for establishment of fusion emergency standard and design of fusion tritium system. Copyright © 2015 Elsevier Ltd. All rights reserved.

Atmospheric dispersion of radioactive materials

International Nuclear Information System (INIS)

Chino, Masamichi

1988-01-01

The report describes currently available techniques for predicting the dispersion of accidentally released radioactive materials and techniques for visualization using computer graphics. A simulation study is also made on the dispersion of radioactive materials released from the Chernobyl plant. The simplest models include the Gauss plume model and the puff model, which cannot serve to analyze the effects of the topography, vertical wind shear, temperature inversion layer, etc. Numerical analysis methods using advection and dispersion equations are widely adopted for detailed evaluation of dispersion in an emergency. An objective analysis model or a hydrodynamical model is often used to calculate the air currents which are required to determine the advection. A small system based on the puff model is widely adopted in Europe, where the topography is considered to have only simple effects. A more sophisticated large-sized system is required in nuclear facilities located in an area with more complex topographic features. An emergency system for dispersion calculation should be equipped with a graphic display to serve for quick understanding of the radioactivity distribution. (Nogami, K.)

Radioactive releases from a thorium-contaminated site in Wayne, New Jersey

International Nuclear Information System (INIS)

Wang, J.; Yang, J.; Merry-Libby, P.

1985-01-01

Various residues and wastes from the production of thorium and rare earths from monazite ore are buried on a hillside in Wayne, New Jersey. In addition, contaminated materials (primarily soils) from nearby vicinity properties are being consolidated onto the Wayne site. The US Department of Energy plans to stabilize all the contaminated materials on an interim basis (20 years) until funding is available to remove them to another location. In order to evaluate the effectiveness of interim stabilization measures, pre-remedial action radioactive releases are compared to estimated releases under a reference stabilization option (one meter of soil cover). Two potential pathways are examined: (1) airborne radioactive gases (thoron and radon) and particulates, and (2) seepage into the near-surface groundwater. The relative reduction of releases into the air and groundwater for the reference stabilization option is analyzed using mathematical models for radioactive gas fluxes and atmospheric dispersion as well as groundwater transport and dispersion. The consequent health implications for nearby individuals and the general population are also estimated. Health effects due to radioactive releases are estimated to be insignificant

Radioactive materials released from nuclear power plants

International Nuclear Information System (INIS)

Tichler, J.; Norden, K.; Congemi, J.

1991-05-01

Releases of radioactive materials in airborne and liquid effluents from commercial light water reactors during 1988 have been compiled and reported. Data on solid waste shipments as well as selected operating information have been included. This report supplements earlier annual reports issued by the former Atomic Energy Commission and the Nuclear Regulatory Commission. The 1988 release data are summarized in tabular form. Data covering specific radionuclides are summarized. 16 tabs

Released radioactivity reducing device

International Nuclear Information System (INIS)

Miyamoto, Yumi.

1995-01-01

A water scrubber is disposed in a scrubber tank and a stainless steel fiber filter is disposed above the water scrubber. The upper end of the scrubber tank is connected by way of a second bent tube to a capturing vessel incorporating a moisture removing layer and an activated carbon filter. The exit of the capturing vessel is connected to a stack. Upon occurrence of an accident of a BWR-type power plant, gases containing radioactive materials released from a reactor container are discharged into the water scrubber from a first bent tube through a venturi tube nozzle, and water soluble and aerosol-like radioactive materials are captured in the water. Aerosol and splashes of water droplets which can not be captured thoroughly by the water scrubber are captured by the stainless steel fiber filter. Gases passing through the scrubber tank are introduced to a capturing vessel through a second bent tube, and organic iodine is captured by the activated carbon filter. (I.N.)

The cleanup of releases of radioactive materials from commercial low-level radioactive waste disposal sites: Whose jurisdiction?

International Nuclear Information System (INIS)

Hartnett, C.

1994-01-01

There exists an overlap between the Comprehensive Environmental Response, Compensation and Recovery Act (open-quotes CERCLAclose quotes) and the Atomic Energy Act (open-quotes AEAclose quotes) regarding the cleanup of releases of radioactive materials from commercial low-level radioactive waste sites. The Nuclear Regulatory Commission (open-quotes NRCclose quotes) and Agreement States have jurisdiction under the AEA, and the Environmental Protection Agency (open-quotes EPAclose quotes) has jurisdiction pursuant to CERCLA. This overlapping jurisdiction has the effect of imposing CERCLA liability on parties who have complied with AEA regulations. However, CERCLA was not intended to preempt existing legislation. This is evidenced by the federally permitted release exemption, which explicitly exempts releases from CERCLA liability pursuant to an AEA license. With little guidance as to the applicability of this exemption, it is uncertain whether CERCLA's liability is broad enough to supersede the Atomic Energy Act. It is the purpose of this paper to discuss the overlapping jurisdiction for the cleanup of releases of radioactive materials from commercial low-level radioactive waste disposal sites with particular emphasis on the cleanup at the Maxey Flats, West Valley and Sheffield sites

Radioactive materials released from nuclear power plants (1976)

International Nuclear Information System (INIS)

Decker, T.R.

1978-11-01

Releases of radioactive materials in airborne and liquid effluents from commercial light water reactors during 1976 have been compiled and reported. Data on solid waste shipments as well as selected operating information have been included. This report supplements earlier annual reports issued by the former Atomic Energy Commission and the Nuclear Regulatory Commission. The 1976 release data are compared with previous year releases in tabular form. Data covering specific radionuclides are summarized

Mesoscale modelling of radioactive contamination formation in Ukraine caused by the Chernobyl accident

International Nuclear Information System (INIS)

Talerko, Nikolai

2005-01-01

This work is devoted to the reconstruction of time-dependent radioactive contamination fields in the territory of Ukraine in the initial period of the Chernobyl accident using the model of atmospheric transport LEDI (Lagrangian-Eulerian DIffusion model). The modelling results were compared with available 137 Cs air and ground contamination measurement data. The 137 Cs atmospheric transport over the territory of Ukraine was simulated during the first 12 days after the accident (from 26 April to 7 May 1986) using real aerological information and rain measurement network data. The detailed scenario of the release from the accidental unit of the Chernobyl nuclear plant has been built (including time-dependent radioactivity release intensity and time-varied height of the release). The calculations have enabled to explain the main features of spatial and temporal variations of radioactive contamination fields over the territory of Ukraine on the regional scale, including the formation of the major large-scale spots of radioactive contamination caused by dry and wet deposition

Dynamic evaluation of environmental impact due to tritium accidental release from the fusion reactor

International Nuclear Information System (INIS)

Nie, Baojie; Ni, Muyi; Jiang, Jieqiong; Wu, Yican

2015-01-01

As one of the key safety issues of fusion reactors, tritium environmental impact of fusion accidents has attracted great attention. In this work, the dynamic tritium concentrations in the air and human body were evaluated on the time scale based on accidental release scenarios under the extreme environmental conditions. The radiation dose through various exposure pathways was assessed to find out the potential relationships among them. Based on this work, the limits of HT and HTO release amount for arbitrary accidents were proposed for the fusion reactor according to dose limit of ITER. The dynamic results aim to give practical guidance for establishment of fusion emergency standard and design of fusion tritium system. - Highlights: • Dynamic tritium concentration in the air and human body evaluated on the time scale. • Different intake forms and relevant radiation dose assessed to find out the potential relationships. • HT and HTO release amount limits for arbitrary accidents proposed for the fusion reactor according to dose limit

Releases of radioactivity at the Savannah River Plant, 1954--1975

International Nuclear Information System (INIS)

Ashley, C.; Zeigler, C.C.

1976-07-01

This report contains summaries of releases of radioactivity to the environs from the Savannah River Plant for each year since plant startup (1954-1975). It also contains monthly summaries of 1975 releases from major emission sources (Separations and Reactor Areas). Releases for the years 1954 through 1959 are reassessed and assigned release values for long-lived specific radionuclides. These long-lived radionuclides (half lives greater than one year) are the only radionuclides included for the years 1954 through 1970. Beginning in 1971 all detectable radionuclides are included. The tabulated data, now compiled by computer, will be updated annually. All measured migration of radioactivity from the F- and H-Area seepage basin systems to Four Mile Creek, and from the K-Area containment basin to Pen Branch is listed in the release summaries and will be updated annually

Fusion radioactivity confinement and application to postulated ITER accidents

International Nuclear Information System (INIS)

Piet, S.J.; Brereton, S.J.

1991-01-01

An assessment of the ITER radioactivity confinement shows reduction of potential accidental releases to the environment by two orders of magnitude. Important credits are the 1% volume/day confinement leakage rate, radioactivity decay for short-lived isotopes, resumption of detritiation/negative pressure within seven days of the accident, and wind meander during the slow confinement leakage. Achieving this two order of magnitude credit in practice requires appropriate design details, especially the leakage rate and detritiation/negative pressure equipment, and research to validate some key assumptions. The confinement maximizes dependence on passive safety features, thereby working toward using fusion's potential safety advantages. The confinement includes several confinement zones with varying human access allowances. Some confinement areas are normally isolated from the environment, the closed ventilation zone. Some areas have an inert cover gas to inhibit combustion. If future assessments of accidental overpressure show the need, we propose a filter/vent system. This report documents our work for the ITER Conceptual Design Activity (CDA). The report is consistent with the final CDA design reports and descriptions, except that our analysis includes a filter/vent. For gaseous or vapor tritium and for most activated aerosols, the reference release fraction is about 2%. For short-lived tungsten-rhenium aerosols, the reference release fraction is somewhat lower, as low as 0.5% for some accident scenarios. Even without resumption of detritiation/decontamination or negative pressure within seven days of the accident, the release fraction for stays below 4%

Forensic Reconstructions of Radioactive Particulate Releases at the Chernobyl and the Al Tuwaitha Nuclear Facilities

International Nuclear Information System (INIS)

Chesser, R. K.; Rogers, B. E.; Philips, C. J.

2007-01-01

Evaluating dispersion of nuclear materials released by accidental, operational, or clandestine means is important to the international community. Our research team has performed forensic reconstructions of radionuclide releases at the Chernobyl Nuclear Power Plant (ChNPP) in Ukraine and the Al Tuwaitha Nuclear Facility (ATNF) near Baghdad, Iraq. Our objectives at ChNPP were to determine the influences of extant atmospheric conditions on particle size distributions and their depositions in the near-field (less than 12 km) regions surrounding the complex. We derived mathematical models of particulate fluid-flow in varying velocity and turbulence fields to fit with 3000 geographically-referenced measurements. Conformity of predicted and empirical fallout patterns was excellent, enabling accurate reconstructions of the particle size contributions, weather conditions, and release energies from the accident. The objectives at ATNF were to evaluate means of dispersion and characterization of nuclear materials within and outside of the compound. Normal facility operations, military actions, and looting of the facility could have contributed to the release of radioactivity, but would yield quite different geographic and radionuclide profiles. Detailed gamma, alpha, and beta radiation profiles were examined for 400 geographically-referenced soil samples collected from ATNF and the villages of Ishtar and Al Ryhad. Natural uranium clusters were identified in several locations clearly showing that looting of yellowcake was the primary means of dispersion. No dispersion of nuclear materials was shown to result from military operations at the site. Our programs demonstrate the precision of geographic-based forensic reconstructions and show that forecast models are robust.(author)

Experience with effluent release from the Omaha V. A. Hospital TRIGA reactor

Energy Technology Data Exchange (ETDEWEB)

Blotcky, A J [Veterans Administration Hospital (United States)

1974-07-01

The effluent release from experiments is controlled by limiting the size of each sample irradiated so that if it was accidentally completely volatized into the closed room, the radioactive concentration would not exceed the permitted limits. The possible releases of Ar-41 and N-16 from the reactor are also considered. The experimentally determined levels of radiation around the Omaha facility are shown. From the data and calculations it was concluded that the levels of effluent release from the Omaha TRIGA are very small.

Experience with effluent release from the Omaha V. A. Hospital TRIGA reactor

International Nuclear Information System (INIS)

Blotcky, A.J.

1974-01-01

The effluent release from experiments is controlled by limiting the size of each sample irradiated so that if it was accidentally completely volatized into the closed room, the radioactive concentration would not exceed the permitted limits. The possible releases of Ar-41 and N-16 from the reactor are also considered. The experimentally determined levels of radiation around the Omaha facility are shown. From the data and calculations it was concluded that the levels of effluent release from the Omaha TRIGA are very small

Generation and release of radioactive gases in LLW disposal facilities

Energy Technology Data Exchange (ETDEWEB)

Yim, M.S. [Harvard School Public Health, Boston, MA (United States); Simonson, S.A. [Massachusetts Institute of Technology, Cambridge, MA (United States)

1995-02-01

The atmospheric release of radioactive gases from a generic engineered LLW disposal facility and its radiological impacts were examined. To quantify the generation of radioactive gases, detailed characterization of source inventory for carbon-14, tritium, iodine-129, krypton-85, and radon-222, was performed in terms of their activity concentrations; their distribution within different waste classes, waste forms and containers; and their subsequent availability for release in volatile or gaseous form. The generation of gases was investigated for the processes of microbial activity, radiolysis, and corrosion of waste containers and metallic components in wastes. The release of radionuclides within these gases to the atmosphere was analyzed under the influence of atmospheric pressure changes.

Treatment of Radioactive Gaseous Waste

International Nuclear Information System (INIS)

2014-07-01

Radioactive waste, with widely varying characteristics, is generated from the operation and maintenance of nuclear power plants, nuclear fuel cycle facilities, research laboratories and medical facilities. The waste needs to be treated and conditioned as necessary to provide waste forms acceptable for safe storage and disposal. Although radioactive gaseous radioactive waste does not constitute the main waste flow stream at nuclear fuel cycle and radioactive waste processing facilities, it represents a major source for potential direct environmental impact. Effective control and management of gaseous waste in both normal and accidental conditions is therefore one of the main issues of nuclear fuel cycle and waste processing facility design and operation. One of the duties of an operator is to take measures to avoid or to optimize the generation and management of radioactive waste to minimize the overall environmental impact. This includes ensuring that gaseous and liquid radioactive releases to the environment are within authorized limits, and that doses to the public and the effects on the environment are reduced to levels that are as low as reasonably achievable. Responsibilities of the regulatory body include the removal of radioactive materials within authorized practices from any further regulatory control — known as clearance — and the control of discharges — releases of gaseous radioactive material that originate from regulated nuclear facilities during normal operation to the environment within authorized limits. These issues, and others, are addressed in IAEA Safety Standards Series Nos RS-G-1.7, WS-G-2.3 and NS-G-3.2. Special systems should be designed and constructed to ensure proper isolation of areas within nuclear facilities that contain gaseous radioactive substances. Such systems consist of two basic subsystems. The first subsystem is for the supply of clean air to the facility, and the second subsystem is for the collection, cleanup and

Modelling of the tritium dispersion from postulated accidental release of nuclear power plants

International Nuclear Information System (INIS)

Soares, Abner Duarte; Simoes Filho, Francisco Fernando Lamego; Cunha, Tatiana Santos da; Aguiar, Andre Silva de; Lapa, Celso Marcelo Franklin

2011-01-01

This study has the aim to assess the impact of accidental release of tritium postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models to simulation of tritium dispersion caused by an accident in a Candu reactor located in the ongoing Angra 3 site. The Candu reactor is one that uses heavy water (D 2 O) as moderator and coolant of the core. It was postulated, then, the LOCA accident (without fusion), where was lost 66 m3 of soda almost instantaneously. This inventory contained 35 P Bq and was released a load of 9.7 TBq/s in liquid form near the Itaorna beach, Angra dos Reis - RJ. The models mentioned above were applied in two scenarios (plant stopped or operating) and showed a tritium plume with specific activities larger than the reference level for seawater (1.1 MBq/m 3 ) during the first 14 days after the accident. (author)

Assessment of the Public Health impact from the accidental release of UF6 at the Sequoyah Fuels Corporation Facility at Gore, Oklahoma (Docket No. 40-8027). Volume 2

International Nuclear Information System (INIS)

1986-03-01

Following the accidental release of UF 6 from the Sequoyah Fuels Facility on January 4, 1986, an Ad Hoc Interagency Public Health Assessment Task Force was established. The Task Force consists of technical staff members from various agencies who have prepared this assessment of the public health impact associated with the accidental release. Volume 2 of the report contains Appendices which provide more detailed information used in the assessment and support the discussion in Volume 1

A method for prevention of radioactive material release

International Nuclear Information System (INIS)

Uchida, Shunsuke; Sato, Chikara; Kitamura, Masao.

1975-01-01

Object: To provide a method for preventing an underwater radioactive material from being released in a simple and highly reliable manner, which can decrease an amount of radioactive materials discharged into open air from reactor water containing a large amount of radioactive materials such as a reactor core pool. Structure: Pure warm water higher in temperature than that of reactor water is poured from the top of a water surface of a water tank which stores reactor water containing radioactive materials such as radioactive iodine, and water is drawn through an outlet located downwardly of the pure warm water inlet to form a layer of pure warm water at the upper part of the water tank while preventing diffusion of the reactor water into the pure warm water by the difference in density between the reactor water and the pure warm water and downward movement of the pure warm water, thereby preventing contact of the reactor water with the atmosphere and diffusion of the radioactive material into the atmosphere. (Kamimura, M.)

Assessment of consequences from airborne releases of radioactive material

International Nuclear Information System (INIS)

McGrath, P.E.; Blond, R.M.

1976-01-01

Over the past several years, the manner in which assessments have been made of the consequences of large airborne releases of radioactive material has not changed much conceptually. The models to describe the atmospheric dispersion of the radioactive material have generally been time-invariant, i.e., the meteorological conditions (thermal stability, wind speed, and precipitation) are invariant during release and the subsequent period of radiation exposure of the population to the airborne material. The frequency distribution of the meteorological conditions are determined by analyzing several years of weather data from the appropriate geographical location. In reality, weather is continuously changing over short time periods (hours) following the release. It is to be expected that the changing meteorological conditions would have important effects on the potential consequences of the release. A time-dependent atmospheric dispersion model was developed and implemented in the Reactor Safety Study. This paper provides a description of the model and the nature of the results generated. Emphasis is given to an explanation of how, and why, these results differ from those estimated with time-invariant models

Radionuclide dispersion and hydrodynamics of Ilha Grande Bay (Angra dos Reis, RJ) simulated from hypothetical accidental releases of liquid wastes

International Nuclear Information System (INIS)

Simoes Filho, Fernando Lamego; Lapa, Celso Marcelo Franklin; Aguiar, Andre Silva; Soares, Abner Duarte

2011-01-01

This study has the aim to assess the impact of accidental release of radionuclides postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models of hydrodynamic circulation and transport for the simulation of tritium dispersion caused by an accidental release in Ilha Grande Bay from the site of the future third plant in two circulation scenarios. The main difference between the scenarios is based on the enhancement of dilution of the highest concentrations in the last one. This dilution enhancement resulting in decreasing concentrations was observed only during the first two weeks, when they ranged from 1 x 10 9 to 5 x 10 5 Bq/m³ close to the Itaorna beach spreading just to Sandri Island. After 180 days, the plume could not be detected anymore in the bay, because their activities would be lower than the minimum detectable value (< 11 kBq/m³). (author)

Modelling of motorway tunnels scenario for utilization of conditionally released radioactive materials

International Nuclear Information System (INIS)

Hrncir, Tomas; Panik, Michal; Necas, Vladimir

2011-01-01

Considerable amount of solid radioactive waste with radioactivity slightly above the limits for unconditional release is generated during the decommissioning of the nuclear installations. Conditional release deals with precisely this type of materials with activity slightly above limits in order to save considerable financial resources, which would be otherwise spend on treatment, conditioning and disposal of these materials at appropriate repository. The basic principles of conditional release as well as possibilities of reusing of the conditionally released materials are described. One of these possibilities of the reusing was chosen and application proposal of conditional release of metal waste - steel reinforcement in the concrete, which could be used for construction of motorway tunnels, was created. The computer code Visiplan 4.0 3D ALARA planning tool software was used for the calculation of effective individual dose for personnel constructing the tunnel and for critical group related to scenario. Particular models for individual scenarios of conditional release have been developed within the scope of this software code. The aim of the paper is to determine a level of the radioactivity of conditional released materials to avoid over exceeding the value of annual individual effective dose 10μSv/year established by international recommendations. (author)

Massive radioactive releases have a great impact on the accident costs

International Nuclear Information System (INIS)

Pascucci-Cahen, L.; Momal, P.

2013-01-01

This article investigates the costs of the consequences of a nuclear accident. The importance of the costs is very dependant on the amount of radioactivity released in the environment during the accident. 2 severe accidents are considered, each accident involves the fusion of the core but the first is characterized by a limited amount of radioactivity released in the atmosphere while the second involves massive radioactive releases. The list of consequences is as comprehensive as possible: site decontamination and dismantlement, land decontamination, sanitary impacts, population displacement, agricultural and economical losses, impact on tourism, impact on the production of electricity...In the first case the total cost reaches 120 billion euros which is still manageable at the scale of a country whereas in the second case the bill reaches 430 billion euros which is unbearable for a country. The very slight probability of such events does not compensate for their catastrophic potentials. (A.C.)

Atmospheric dispersion of radioactive releases: Computer code DIASPORA

International Nuclear Information System (INIS)

Synodinou, B.M.; Bartzis, J.M.

1982-05-01

The computer code DIASPORA is presented. Air and ground concentrations of an airborne radioactive material released from an elevated continuous point source are calculated using Gaussian plume models. Dry and wet deposition as well as plume rise effects are taken into consideration. (author)

Release to the environment and diffusion of radioiodine in the environment, 1

International Nuclear Information System (INIS)

Murata, Toshifumi

1979-01-01

1. Radioactivity of iodine nuclides accumulated in nuclear facilities. Radioactive iodine nuclides which are produced in nuclear plants consist mainly of short lived 131 I- 135 I, while 129 I with long half life is being produced in a small amount. The radioactivity of iodine in a power reactor of 1,000 MWe which burns uranium fuel amounts to about 6 x 10 8 C sub(i). In the case of fuel which is handled in a reprocessing plant of spent fuel, almost all radioactive iodine remaining in the fuel is 129 I (half life: 1.7 x 10 7 years) because of cooling period of more than 6 months which is imposed by the plant. 2. Release of radioactive iodine during normal operating conditions. In an event of fuel failure in light water cooled reactors, a part of radioactive iodine is dissolved in water and very small amount is released as gaseous iodine to the environment through the ventillation system. The actual amount of radioactive iodine which was released from various types of nuclear reactors in the world between 1970 to 1974 is recorded as much lower than to the presently regulated value in all cases. 3. Behavior of radioactive iodine during postulated accident. The amount of radioactive iodine which will be released from reactor core to the containment vessel varies with conditions to be assumed. In the event of a severe accidental condition such as fuel melt down or oxidation, 25% of radioactive iodine in the fuel are assumed to be released. The iodine released to the containment vessel is mostly removed by planting out to the wall of the containment or washed out by core spray, while the remaining part in air is to be removed by a filter unit which is installed in the emergency gas treatment system. (author)

Commitment of involved actors in the preparation of accidental and post-accident situations: European experiments; Engagement des parties prenantes a la preparation aux situations accidentelles et post-accidentelles: experiences Europeennes

Energy Technology Data Exchange (ETDEWEB)

Schneider, Th. [CEPN, 28 rue de la Redoute, 92260 Fontenay-aux-Roses (France)

2010-07-01

The author briefly describes some approaches developed within the EURANOS European research programme between 2004 and 2009 which aims at promoting the building up of a European network (NERIS) for the management of nuclear accidental and post-accident situations. Notably, he comments the experiment which took place in the Montbeliard district where two types of radiological events have been modelled and simulated: an accident in the Fessenheim nuclear power plant with two scenarios of release, and a transportation accident with a release of radioactive caesium 137. He also evokes the Norwegian experience and some other actions in Finland, Great-Britain, Spain and Slovakia where reflections on the management of accidental and post-accident situations or crisis exercises have been organized

Assessment of radioactive material released from a fuel fabrication plant under accidental conditions

International Nuclear Information System (INIS)

1981-01-01

This report evaluates the amounts of fissile material released both inside and outside a mixed oxide fuel fabrication plant (MOFFP) for light water reactors. The first section begins with a descriptive study of fissile material containment systems, and the methods available for quantifying accident occurrence probabilities. In addition to accidents common to all industrial facilities, other much rarer accidents were considered, such as aircraft crashes. The minimum occurrence probability limit for consideration in this study was set at 10 -6 per annum. The second part of this report attempts to assess the consequences of the accidents considered (i.e. with occurrence probabilities exceeding 10 -6 per annum) by determining maximum values for such accidents. Acts of sabotage and other accidents of this type are beyond the scope of this study and were not taken into consideration. The most serious potential accident would be a fire involving all of the glove boxes in the PuO 2 powder calcination and preparation cell, which could release 76.5 mg of PuO 2 powder into the atmosphere; the occurrence probability of such an accident, however, is slight (less than 10 -5 per annum). The second possibility, is a specially nuclear hazard that would release fission products into the atmosphere. The occurrence probability of such an accident is currently evaluated at 10 -3 per annum

Models for environmental impact assessments of releases of radioactive substances from CERN facilities

CERN Document Server

Vojtyla, P

2005-01-01

The document describes generic models for environmental impact assessments of releases of radioactive substances from CERN facilities. Except for few models developed in the Safety Commission, the models are based on the 1997 Swiss directive HSK-R-41 and on the 2001 IAEA Safety Report No. 19. The writing style is descriptive, facilitating the practical implementation of the models at CERN. There are four scenarios assumed for airborne releases: (1) short-term releases for release limit calculations, (2) actual short-term releases, (3) short-term releases during incidents/accidents, and (4) chronic long-term releases during the normal operation of a facility. For water releases, two scenarios are considered: (1) a release into a river, and (2) a release into a water treatment plant. The document shall be understood as a reference for specific environmental studies involving radioactive releases and as a recommendation of the Safety Commission.

Taking in account of contextual parameters in post accidental radioecology

International Nuclear Information System (INIS)

Renaud, Ph.; Maubert, H.; Bernie, J.C.

1997-01-01

The consequences on agricultural or breeding products of a radioactive accidental release are strongly linked to the context in which radioactive deposits occur: for example conditions of deposition in relation with agricultural and feeding schedules. These contextual parameters lead to a variation of results given by models greater than transfer factors uncertainties. For example, cow milk contamination stretches on several decades during the months following deposit as a function of feeding practices. In the same way, if a wheat plant receives the deposit during grain development, harvested grains will have a contamination level 10 3 to 10 4 times higher that if deposition occurs before the growing stage. To create a decision support system like the ASTRAL software, the need to realize a modelling of these contextual parameters has been encountered. Moreover, to help experts for evaluations, default informations relative to agricultural and breeding practices for France are given through databases. However, in case of a real accident, it would be important to re-initialize these contextual parameters which change from year to year, in order to obtain more precise assessments. (authors)

Environmental system applied to radioactive liquid effluent release

International Nuclear Information System (INIS)

Nisti, Marcelo Bessa

2009-01-01

The current environmental administration considers the productive activity as an environmental system, defined as a group of processes, interactions, parameters and factors involved in the production. This mastering dissertation evaluated the release of the liquid radioactive effluents at Instituto de Pesquisas Energeticas e Nucleares (IPEN), under a systemic environmental study. The study evaluated the source term at IPEN in the period from 2004 to 2008, making use of gamma-ray and alpha spectrometry, instrumental neutron activation analysis, liquid phase scintillation and atomic absorption spectrometry. The employed methodologies were verified using samples from the Intercomparison National Program - PNI/IRD and Reference Materials. The facilities that contributed the most in these releases were the Radiopharmaceutical Center (CR) and the Research Reactor Center (CRPq) with an average of 11,4% and 87,4%, respectively, relative to the present radioactive activity. The sewer system releases were within the radioactive protection regulations, showing the effectiveness of IPEN's Radioactive Effluents Monitoring Program. The concentration of the stable elements Ag, Cd, Cr, Fe, Mn, Ni, Pb and Zn was determined in the liquid effluent in ali the samples from the storage tanks TR1 and CR in the period from 2004 to 2008 and in some of the samples of other IPEN's facilities in the period from 2004 to 2007. Among the analyzed effluents, two samples were higher than the stable elements discharge standards established in the state of Sao Paulo, one sample was higher than the required value of the element cadmium and the other higher than required value of the element zinco The storage tank TR1 discharge flow was estimated in 10,9 ± 0,9 m3 h -1 . The dilution factor at discharge point E1 was estimated using a radiotracers the isotopes 3 H, 137 CS, 60 Co, 54 Mn and 65 Zn, which are commonly released into IPEN's sewer system. The executed radiotracer study was carried out

Consequences of severe radioactive releases to Nordic Marine environment

Energy Technology Data Exchange (ETDEWEB)

Iosjpe, M. [Norwegian Radiation Protection Authority (NRPA) (Norway); Isaksson, M. [Univ. of Gothenburg (Sweden); Joensen, H.P. [Froskaparsetur Foeroya. Faroe Islands, Torshavn (Denmark); Lahtinen, J. [Radiation and Nuclear Safety Authority (Finland); Logemann, K. [Univ. of Iceland (Iceland); Palsson, S.E. [Geislavarnir Rikisins (Iceland); Roos, P. [Technical Univ. of Denmark. Risoe DTU, Roskilde (Denmark); Suolanen, V. [Technical Research Centre of Finland (Finland)

2013-02-15

In the report, consequences of hypothetical severe nuclear accidents releases to Nordic marine environment are preliminary considered. The considered marine area comprises the Baltic Sea (Sweden, Denmark, Finland) and the North Atlantic (Iceland, Faroes, Norway) areas. The hypothetical severe nuclear accidents can be related to nuclear power plants, nuclear powered submarines or ice-breakers. Quite comprehensive survey on radioactive source terms of extremely severe nuclear power and submarine accidents has been done. This enables to estimate more realistically possible radioactive releases of various elements and nuclides to marine environment. One recent reference is of course the Fukushima accident and estimated releases there. The marine flows and dilution circumstances around the Nordic nuclear power plants and in the Baltic Sea area in general, has been studied. Respectively marine flows related to Iceland and Faroes coasts are considered with measured data and with preliminary 3D-model simulations. The substantial depth of sea water in the North Atlantic affect vertical concentration profiles to some extent. At Icelandic or Faroese waters, a potential submarine accident would likely occur in a well defined water mass, and radioactivity from the accident would be detected and spread with the flow regime of the water mass in the world ocean. Based on hypothetical severe accidents scenarios, preliminary consequence calculations has been done. It should be emphasised that the considered severe accident cases, considered in this study, do not directly attach any specific Nordic nuclear power plant or any specific submarine type. The considered radioactive releases will, however, provide specified references for more extensive consideration of environmental consequences of severe - or minor - radioactive releases to Nordic marine environment. As a reference, the release amounts from a 3000 MW{sub th} reactor size were used. Based on source term analyses, the

Consequences of severe radioactive releases to Nordic Marine environment

International Nuclear Information System (INIS)

Iosjpe, M.; Isaksson, M.; Joensen, H.P.; Lahtinen, J.; Logemann, K.; Palsson, S.E.; Roos, P.; Suolanen, V.

2013-02-01

In the report, consequences of hypothetical severe nuclear accidents releases to Nordic marine environment are preliminary considered. The considered marine area comprises the Baltic Sea (Sweden, Denmark, Finland) and the North Atlantic (Iceland, Faroes, Norway) areas. The hypothetical severe nuclear accidents can be related to nuclear power plants, nuclear powered submarines or ice-breakers. Quite comprehensive survey on radioactive source terms of extremely severe nuclear power and submarine accidents has been done. This enables to estimate more realistically possible radioactive releases of various elements and nuclides to marine environment. One recent reference is of course the Fukushima accident and estimated releases there. The marine flows and dilution circumstances around the Nordic nuclear power plants and in the Baltic Sea area in general, has been studied. Respectively marine flows related to Iceland and Faroes coasts are considered with measured data and with preliminary 3D-model simulations. The substantial depth of sea water in the North Atlantic affect vertical concentration profiles to some extent. At Icelandic or Faroese waters, a potential submarine accident would likely occur in a well defined water mass, and radioactivity from the accident would be detected and spread with the flow regime of the water mass in the world ocean. Based on hypothetical severe accidents scenarios, preliminary consequence calculations has been done. It should be emphasised that the considered severe accident cases, considered in this study, do not directly attach any specific Nordic nuclear power plant or any specific submarine type. The considered radioactive releases will, however, provide specified references for more extensive consideration of environmental consequences of severe - or minor - radioactive releases to Nordic marine environment. As a reference, the release amounts from a 3000 MW th reactor size were used. Based on source term analyses, the chosen

Plutonium in the environment: key factors related to impact assessment in case of an accidental atmospheric release

Energy Technology Data Exchange (ETDEWEB)

Guetat, P. [CEA Valduc, 21 - Is-sur-Tille (France); Moulin, V.; Reiller, P. [CEA Saclay, 91 (FR)] (and others)

2009-07-01

This paper deals with plutonium and key factors related to impact assessment. It is based on recent work performed by CEA which summarize the main features of plutonium behaviour from sources inside installations to the environment and man, and to report current knowledge on the different parameters used in models for environmental and radiological impact assessment. These key factors are illustrated through a case study based on an accidental atmospheric release of Pu in a nuclear facility. (orig.)

Behavior of radioactive products in the containment. Behavior of iodine in accidental situation

International Nuclear Information System (INIS)

Lucas, M.; Fermandjian, J.

1984-12-01

The aim of studies on iodine is to demonstrate that in the case of failure in the containment occuring after more than one day, the total quantity of iodine released would be lower or equal to 1% of the inventory of the core at the moment of the begining of the accident. The first part describes the behavior of iodine in the containment of a PWR, in the case of an important accident. The second part deals with a synthesis of the knowledge about iodine. The third part presents the inventory of the main problems not resolved concerning the chemistry of iodine and the radiolysis of iodine. Finally, the program of studies on iodine is briefly presented; its aim is to develop the knowledge about iodine in accidental situations [fr

Study on radioactive release of gaseous and liquid effluents during normal operation of AP1000

International Nuclear Information System (INIS)

Gong Quan; Zhou Jing; Liu Yu

2014-01-01

The gaseous and liquid radioactive releases of pressurized water reactors plant during normal operation are an important content of environmental impact assessment and play a significant role in the design of nuclear power plant. According to the design characters of AP1OOO radioactive waste management system and the study on the calculation method and the release pathways, the calculation model of the gaseous and liquid radioactive releases during normal operation for AP1OOO are established. Base on the established calculation model and the design parameters of AP1000, the expected value of gaseous and liquid radioactive releases of AP1OOO is calculated. The results of calculation are compared with the limits in GB 6249-2011 and explain the adder that is included tu account for anticipated operational occurrences, providing a reference for environmental impact assessment of pressurized water reactor. (authors)

Release mechanisms from shallow engineered trenches used as repositories for radioactive wastes

International Nuclear Information System (INIS)

Locke, J.; Wood, E.

1987-05-01

This report has been written for the Department of the Environment as part of their radioactive waste management research programme. The aim has been to identify release mechanisms of radioactivity from fully engineered trenches of the LAND 2 type and, to identify the data needed for their assessment. No direct experimental work has been involved. The report starts with a brief background to UK strategy and outlines a basic disposal system. It gives reviews of existing experience of low level radioactive waste disposal from LAND 1 trenches and of UK experience of toxic waste disposal to provide a practical basis for the next section which covers the implications of identified release mechanisms on the design requirements for an engineered trench. From these design requirements and their interaction with potential site conditions (both saturated and unsaturated zone sites are considered) an assessment of radionuclide release mechanism is made. (author)

Risk assessment methodology for evaluating releases of radioactively contaminated materials

International Nuclear Information System (INIS)

Chen, S.Y.

1993-01-01

Extensive decontamination and decommissioning (D ampersand D) activities are expected to be required in the near future in association with license termination of nuclear power facilities and cleanup efforts at the U.S. Department of Energy's (DOE's) weapons production facilities. In advance of these D ampersand D activities, it is becoming increasingly urgent that standards be established for the release of materials with residual radioactive contamination. The only standards for unrestricted release that currently exist address surface contamination. The methods used to justify those standards were developed some 20 yr ago and may not satisfy today's criteria. Furthermore, the basis of setting standards has moved away from the traditional open-quotes instrumentation-basedclose quotes concept toward a open-quotes risk-basedclose quotes approach. Therefore, as new release standards are developed, it will be necessary that risk assessment methodology consistent with modern concepts be incorporated into the process. This paper discusses recent developments in risk methodology and issues and concerns regarding the future development of standards for the release of radioactively contaminated materials

Radioactive materials released from nuclear power plants. Annual report 1977

International Nuclear Information System (INIS)

Decker, T.R.

1978-11-01

Releases of radioactive materials in airborne and liquid effluents from commercial light water reactors during 1977 have been compiled and reported. Data on solid waste shipments as well as selected operating information have been included. This report supplements earlier annual reports issued by the former Atomic Energy Commission and the Nuclear Regulatory Commission. The 1977 release data are compared with previous years releases in tabular form. Data covering specific radionuclides are summarized

Development of management tools for accidental radiological contamination of the French coastal areas - Development of management tools for accidental radiological contamination in the French marine coastal areas

Energy Technology Data Exchange (ETDEWEB)

Duffa, C.; Charmasson, S. [IRSN/PRP-ENV/SESURE/LERCM - Antenne de Radioecologie Marine, Centre Ifremer, Zone portuaire de Bregaillon, 13507 La Seyne sur Mer (France); Bailly du Bois, P.; Fievet, B. [IRSN/PRP-ENV/SERIS/LRC (France); Couvez, C.; Renaud, P. [IRSN/PRP-ENV/SESURE/DIR (France); Didier, D. [IRSN/PRP-CRI/SESUC/BMTA (France)

2014-07-01

The Fukushima nuclear accident led to the most important accidental release of artificial radionuclides into the sea. This accident has underlined the importance of being able to adequately reproduce the fate of radioactive releases and to estimate their consequences for the marine environment. For its Crisis Centre, the French Institute for Radioprotection and Nuclear Safety (IRSN) has operational tools, in order to help experts and decision makers in case of any atmospheric accidental release and terrestrial environment contamination. The on-going project aims to develop tools to manage any marine contamination of the French coastal areas. We should be able to evaluate and anticipate the marine post-accidental situation: contaminated areas localization and contamination levels, and possible consequences. Many sites has be considered as potential source terms into the sea: the Coastal Nuclear Power Plants, the La Hague reprocessing Plant, the Brest and Toulon Military Harbours as home-ports of nuclear powered vessels, and different river mouths (Rhone River, Gironde, Loire, Seine) that could be contaminated by upstream accidental release. To achieve this goal, two complementary approaches are developed: Marine sheets and a dedicated modelling tool (STERNE). - Marine sheets aim to summarize marine environment characteristics for the different sites, identify potential stakes for human protection such as aquaculture areas, beaches, or industrial water intakes, and ecological stakes. Whenever possible, a local climatology (main currents depending on meteorological or tide conditions) that could be a support to first environmental measurement strategy is proposed. A list of available local contacts for any operational management is also provided. - The modelling tool, STERNE (Simulation du Transport et du transfert d'Elements Radioactifs dans l'environNEment marin), must predict radionuclide dispersion and contamination of water, marine species and sediments

Influence of plume rise on the consequences of radioactive material releases

International Nuclear Information System (INIS)

Russo, A.J.; Wayland, J.R.; Ritchie, L.T.

1977-01-01

Estimates of health consequences resulting from a postulated nuclear reactor accident can be strongly dependent on the buoyant rise of the plume of released radioactive material. The sensitivity of the consequences of a postulated accident to two different plume rise models has been investigated. The results of these investigations are the subject of this report. One of the models includes the effects of emission angle, momentum, and radioactive heating of the released material. The difference in the consequence estimates from the two models can exceed an order of magnitude under some conditions, but in general the results are similar

The minimization of radioactive releases to the sea from the Tokai Reprocessing Plant

International Nuclear Information System (INIS)

Sugiyama, T.; Yoshikawa, K.; Ishii, T.

1996-01-01

The Tokai Reprocessing Plant (TRP) started hot operation in September 1977. The total amount of about 790 tU of spent fuel, generated in Japan, has been successfully reprocessed as of December 1994. Low-level liquid wastes have been treated safely with the low-level waste treatment process. The design of TRP was based on foreign technology. In the early stage of designing, the radioactivity released to the sea was estimated at approximately 2.6 TBq/day (70 Ci/day) for beta activity (except for tritium). Later, PNC added an evaporator to the process to reduce the level down to 1/100, i.e. 9.6 TBq/year (260 Ci/year) or 2.6 x 10 -2 TBq/day (0.7 Ci/day). In addition, under the supervision of the government, PNC started R and D to further decrease the radioactivity released to the sea in terms of ALARA. Aiming at reducing the activity from 9.6 TBq/year (260 Ci/year) to 1/10 of that value (i.e. 26 Ci/year), the release reduction technology development facility was added. This facility was incorporated into the low-level waste treatment process in 1980, before starting the regular operation of TRP. Since the fuel reprocessing commenced, total radioactivity discharged to the sea has been 1.9 x 10 -2 TBq (0.51 Ci) for beta activity, as of December 1994. Before incorporating the release reduction technology development facility, the yearly level was 3.7 x 10 -3 - 7.4 x 10 -3 TBq (0.1 - 0.2 Ci). After incorporation of the facility, radioactivity released to the sea was greatly decreased to non-detection levels in recent years, in spite of increasing annual reprocessing amounts. Although serious equipment failures have occurred such as the acid recovery evaporator and the dissolvers, there was no influence on radioactivity released to the sea. (author)

Water - The radiological health of rivers: releases are very much controlled downstream power plants. What do hospital releases represent? The Seine reserves a surprise

International Nuclear Information System (INIS)

Anon.

2015-01-01

After a brief presentation of the role of the IRSN in the control of the radioactivity present in waters and in the control and follow-up of all sources of radioactivity, a first article briefly present the hydro-collector network, indicates that some point samplings of sediment and aquatic species are performed, that a national network of beacons for a continuous radioactivity measurement is installed in the main French rivers, downstream nuclear installations, and that advanced measurement techniques are used to detect very small level of tritium. Maps giving a brief indication of the radiological condition of the Loire and Rhone are provided. A second article addresses the control of releases downstream power plants, and evokes the legal context and the associated objectives and produced documents. The third article discusses the risk associated with hospital wastes and releases (liquid and solid effluents), how radioactivity is controlled between the hospital and tap water distribution. The last article reports and comments the results obtained by an analysis of historical pollutions trapped in the sediments of the Seine: 40 year-old traces of plutonium have been discovered, due to an accidental release from a CEA installation in Fontenay-aux-Roses, with no detrimental impact on population or on sewer workers

ARANO - a computer program for the assessment of radiological consequences of atmospheric radioactive releases

International Nuclear Information System (INIS)

Savolainen, I.; Vuori, S.

1980-09-01

A short description of the calculation possibilities, methods and of the structure of the computer code system ARANO is given, in addition to the input quide. The code can be employed in the calculation of environmental radiological consequences caused by radioactive materials released to atmosphere. Results can be individual doses for different organs at given distances from the release point, collective doses, numbers of persons exceeding given dose limits, numbers of casualties, areas polluted by deposited activity and losses of investments or production due to radioactive contamination. Both a case with a single release and atmospheric dispersion situation and a group of radioactive release and dispersions with discrete probability distributions can be considered. If the radioactive releases or the dispersion conditions are described by probability distributions, the program assesses the magnitudes of the specified effects in all combinations of the release and dispersion situations and then calculates the expectation values and the cumulative probability distributions of the effects. The vertical mixing in the atmosphere is described with a Ksub(Z)-model. In the lateral direction the plume is assumed to be Gaussian, and the release duration can be taken into account in the σsub(y)-values. External gamma dose from the release plume is calculated on the basis of a data file which has been created by 3-dimensional integration. Dose due to inhalation and due to gamma radiation from the contaminated ground are calculated by using appropriate dose conversion factors, which are collected into two mutually alternative block data subprograms. (author)

Hazard of radioactive releases resulted from coal burning

International Nuclear Information System (INIS)

Gabbard, V.

1995-01-01

Consideration is given to the data, pointing to the fact, that coal-burning power plants release of radioactive substances, contained in gaseous wastes, is not less, than the same one of nuclear power plants. The necessity of regulating emission of these substance in atmosphere by analogy with nuclear power industry is shown. 1 fig

SPEEDI: a computer code system for the real-time prediction of radiation dose to the public due to an accidental release

International Nuclear Information System (INIS)

Imai, Kazuhiko; Chino, Masamichi; Ishikawa, Hirohiko

1985-10-01

SPEEDI, a computer code system for prediction of environmental doses from radioactive materials accidentally released from a nuclear plant has been developed to assist the organizations responsible for an emergency planning. For realistic simulation, have been developed a model which statistically predicts the basic wind data and then calculates the three-dimensional mass consistent wind field by interpolating these predicted data, and a model for calculation of the diffusion of released materials using a combined model of random-walk and PICK methods. These calculation in the system is carried out in conversational mode with a computer so that we may use the system with ease in an emergency. SPEEDI has also versatile files, which make it easy to control the complicated flows of calculation. In order to attain a short computation time, a large-scale computer with performance of 25 MIPS and a vector processor of maximum 250 MFLOPS are used for calculation of the models so that quick responses have been made. Simplified models are also prepared for calculation in a minicomputer widely used by local governments and research institutes, although the precision of calculation as same with the above models can not be expected to obtain. The present report outlines the structure and functions of SPEEDI, methods for prediction of the wind field and the models for calculation of the concentration of released materials in air and on the ground, and the doses to the public. Some of the diffusion models have been compared with the field experiments which had been carried out as a part of the SPEEDI development program. The report also discusses the reliability of the diffusion models on the basis of the compared results, and shows that they can reasonably simulate the diffusion in the internal boundary layer which commonly occurs near the coastal region. (J.P.N.)

Releases of radioactivity from uranium mills and effluent treatment costs

International Nuclear Information System (INIS)

Witherspoon, J.P.; Sears, M.B.; Blanco, R.E.

1977-01-01

Airborne releases of radioactive materials from uranium milling to the environment consist of ore dust, yellowcake dust, tailings dust, and radon gas while the mill is active. After a mill has ceased operations, tailings may be stabilized to minimize or prevent airborne releases of radioactive particulates. However, radon gas will continue to be released in amounts inversely proportional to the degree of stabilization treatment (and expense). Liquid waste disposal is by evaporation and natural seepage to the ground beneath the tailings impoundment area. The release of radioactive materials (and potential radiation exposures) determines the majority of costs associated with minimizing the environmental impact of uranium milling. Radwaste treatments to reduce estimated radiation doses to individuals to 3 to 5% of those received with current milling practices are equivalent to $0.66 per pounds of U 3 O 8 and 0.032 mill per kWhr of electricity. This cost would cover a high efficiency reverse jet bag filter and high energy venturi scrubbers for dusts, neutralization of liquids, and an asphalt-lined tailings basin with a clay core dam to reduce seepage. In addition, this increased cost would cover stabilization of tailings, after mill closure, with a 1-in. asphalt membrane topped by 2 ft of earth and 0.5 ft of crushed rock to provide protection against future leaching and wind erosion. The cost of reducing the radiological hazards associated with uranium milling to this degree would contribute about 0.4% to the current total cost of nuclear power

Suggested Methods for Assessment of Accidental External Exposure and Internal Contamination of Workers and their Medical Management

International Nuclear Information System (INIS)

Mahmoud, K.A.; Morsy, Samira M.; Hanna, I.R.A.; Hafez, M.B.; Mohamed, H.O.; Jahns, E.; Saied, F.I.A.

1969-01-01

Certain assumptions are given for the amount of fission products released from a research reactor after the occurrence of an accident. The size and location of radioactive cloud are assumed, and the corresponding external and internal exposures of workers are computed. A method is suggested for assessment of accidental external radiation dose based on experimental studies performed on the changes of quenching effect of plasma or sera as a.result of whole- body gamma-radiation ranging from 25-200 rems. For assessment of accidentally internally incorporated gamma emitters we suggest the standard chair whole-body counter technique which was found to detect reliably 1/100 of the maximum permissible body burden within eight minutes. It was also suggested that a separation method based on the use of absorption phenomena observed for Sephadex (gel resin) can be applied for quick determination of gross alpha activity in urine. For management of accidentally exposed workers to radiation doses of a lethal or sublethal nature, bone-marrow transplantation therapy and blood component therapy in sterile rooms is discussed in the light of experience gained from treatment of leukaemia with intensive chemotherapy. (author)

UFOING: A program for assessing the off-site consequences from ingestion of accidentally released radionuclides

International Nuclear Information System (INIS)

Steinhauer, C.

1988-12-01

The program UFOING estimates foodchain-related consequences following accidental releases of radionuclides to the atmosphere. It was developed as a stand-alone supplement to the accident consequence assessment program system UFOMOD to allow faster and more detailed investigations of the consequences arising from the foodchain pathways than possible with the version of UFOING which is implemented in UFOMOD. For assumed releases at different times of the year, age dependent individual doses, collective doses, individual risks for fatal stochastic somatic health effects as a function of time, the total numbers of the effects, and the areas affected by foodbans together with the estimated duration of the bans are calculated. In addition, percentage contributions of radionuclides and foodstuffs to the doses and risks can be evaluated. In the first part of this report, an overview over the program is given. The other parts contain a user's guide, a program guide, and descriptions of the data employed and of the version of UFOING which is implemented in UFOMOD. (orig.) [de

Maximum permissible dietary contamination after the accidental release of radioactive materials from a nuclear reactor

Energy Technology Data Exchange (ETDEWEB)

Pochin, E E; Rock Carling, Ernest; Court Brown, W M [Medical Research Council, Committee on Protection against Ionizing Radiations, London (United Kingdom); and others

1960-12-01

After the accident to No. 1 pile at Windscale on October 10, 1957 (Atomic Energy Office, 1957), the Atomic Energy Authority asked the Medical Research Council for advice on the maximum intake of certain radioactive isotopes that should be regarded as permissible, under emergency conditions, for members of the general population living in, or deriving food from, an area contaminated owing to an accident to a reactor. The Council's Committee on Protection against Ionizing Radiations, together with its Subcommittees on Internal and External Radiations, has considered this problem, and concludes that the intake of radioactive materials by ingestion of contaminated food would generally be the limiting source of hazard after any such accident. Intake by inhalation, or radiation from the exterior, would become of importance only in rather special circumstances. In the following report, therefore, the Committee proposes maximum permissible levels of dietary contamination for the relevant isotopes in the emergency conditions envisaged. In proposing these levels, the Protection Committee has used the fullest information available on the radiation doses that would be delivered to different body tissues and at different ages by the isotopes concerned, and on the ways in which these materials would enter the body.

Maximum permissible dietary contamination after the accidental release of radioactive materials from a nuclear reactor

International Nuclear Information System (INIS)

Pochin, E.E.; Rock Carling, Ernest; Court Brown, W.M.

1960-01-01

After the accident to No. 1 pile at Windscale on October 10, 1957 (Atomic Energy Office, 1957), the Atomic Energy Authority asked the Medical Research Council for advice on the maximum intake of certain radioactive isotopes that should be regarded as permissible, under emergency conditions, for members of the general population living in, or deriving food from, an area contaminated owing to an accident to a reactor. The Council's Committee on Protection against Ionizing Radiations, together with its Subcommittees on Internal and External Radiations, has considered this problem, and concludes that the intake of radioactive materials by ingestion of contaminated food would generally be the limiting source of hazard after any such accident. Intake by inhalation, or radiation from the exterior, would become of importance only in rather special circumstances. In the following report, therefore, the Committee proposes maximum permissible levels of dietary contamination for the relevant isotopes in the emergency conditions envisaged. In proposing these levels, the Protection Committee has used the fullest information available on the radiation doses that would be delivered to different body tissues and at different ages by the isotopes concerned, and on the ways in which these materials would enter the body

Release process for non-real property containing residual radioactive material

International Nuclear Information System (INIS)

Ranek, N.L.; Chen, S.Y.; Kamboj, S.; Hensley, J.; Burns, D.; Fleming, R.; Warren, S.; Wallo, A.

1997-01-01

It is DOE's objective to operate its facilities and to conduct its activities so that radiation exposures to members of the public are maintained within acceptable limits and exposures to residual radioactive materials are controlled. To accomplish this, DOE has adopted Order DOE 5400.51 'Radiation Protection of the Public and the Environment', and will be promulgating IO CR Part 834 to codify and clarify the requirements of DOE 5400.5. Under both DOE 5400.5 and 10 CR Part 834, radioactively contaminated DOE property is prohibited from release unless specific actions have been completed prior to the release. This paper outlines a ten-step process that, if followed, will assist DOE Operations and contractor personnel in ensuring that the required actions established by Order DOE 5400.5 and 10 CR Part 834 have been appropriately completed prior to the release for reuse or recycle of non-real property (e.g., office furniture, computers, hand tools, machinery, vehicles and scrap metal). Following the process will assist in ensuring that radiological doses to the public from the released materials will meet applicable regulatory standards and be as low as reasonably achievable (ALARA)

Low-level radioactive wastes: Their treatment, handling, disposal

Energy Technology Data Exchange (ETDEWEB)

Straub, Conrad P [Robert A. Taft Sanitary Engineering Center, Radiological Health Research Activities, Cincinnati, OH(United States)

1964-07-01

The release of low level wastes may result in some radiation exposure to man and his surroundings. This book describes techniques of handling, treatment, and disposal of low-level wastes aimed at keeping radiation exposure to a practicable minimum. In this context, wastes are considered low level if they are released into the environment without subsequent control. This book is concerned with practices relating only to continuous operations and not to accidental releases of radioactive materials. It is written by use for those interested in low level waste disposal problems and particularly for the health physicist concerned with these problems in the field. It should be helpful also to water and sewage works personnel concerned with the efficiency of water and sewage treatment processes for the removal of radioactive materials; the personnel engaged in design, construction, licensing, and operation of treatment facilities; and to student of nuclear technology. After an introduction the following areas are discussed: sources, quantities and composition of radioactive wastes; collection, sampling and measurement; direct discharge to the water, soil and air environment; air cleaning; removal of radioactivity by water-treatment processes and biological processes; treatment on site by chemical precipitation , ion exchange and absorption, electrodialysis, solvent extraction and other methods; treatment on site including evaporation and storage; handling and treatment of solid wastes; public health implications. Appendices include a glossary; standards for protection against radiation; federal radiation council radiation protection guidance for federal agencies; site selection criteria for nuclear energy facilities.

Final Report: Safety of Plasma Components and Aerosol Transport During Hard Disruptions and Accidental Energy Release in Fusion Reactor

Energy Technology Data Exchange (ETDEWEB)

Bourham, Mohamed A.; Gilligan, John G.

1999-08-14

Safety considerations in large future fusion reactors like ITER are important before licensing the reactor. Several scenarios are considered hazardous, which include safety of plasma-facing components during hard disruptions, high heat fluxes and thermal stresses during normal operation, accidental energy release, and aerosol formation and transport. Disruption events, in large tokamaks like ITER, are expected to produce local heat fluxes on plasma-facing components, which may exceed 100 GW/m{sup 2} over a period of about 0.1 ms. As a result, the surface temperature dramatically increases, which results in surface melting and vaporization, and produces thermal stresses and surface erosion. Plasma-facing components safety issues extends to cover a wide range of possible scenarios, including disruption severity and the impact of plasma-facing components on disruption parameters, accidental energy release and short/long term LOCA's, and formation of airborne particles by convective current transport during a LOVA (water/air ingress disruption) accident scenario. Study, and evaluation of, disruption-induced aerosol generation and mobilization is essential to characterize database on particulate formation and distribution for large future fusion tokamak reactor like ITER. In order to provide database relevant to ITER, the SIRENS electrothermal plasma facility at NCSU has been modified to closely simulate heat fluxes expected in ITER.

Approach and issues toward development of risk-based release standards for radioactive scrap metal recycle and reuse

International Nuclear Information System (INIS)

Chen, S.Y.; Nieves, L.A.; Nabelssi, B.K.; LePoire, D.J.

1994-01-01

The decontamination and decommissioning of nuclear facilities is expected to generate large amounts of slightly radioactive scrap metal (RSM). It is likely that some of these materials will be suitable for recycling and reuse. The amount of scrap steel from DOE facilities, for instance, is estimated to be more than one million tons (Hertzler 1993). However, under current practice and without the establishment of acceptable recycling standards, the RSM would be disposed of primarily as radioactive low-level waste (LLW). In the United States, no specific standards have been developed for the unrestricted release of bulk contaminated materials. Although standards for unrestricted release of radioactive surface contamination (NRC 1974) have existed for about 20 years, the release of materials is not commonly practiced because of the lack of risk-based justifications. Recent guidance from international bodies (IAEA 1988) has established a basis for deriving risk-based release limits for radioactive materials. It is important, therefore, to evaluate the feasibility of recycling and associated issues necessary for the establishment of risk-based release limits for the radioactive metals

Modelling of artificial radioactivity migration in environment: a survey

International Nuclear Information System (INIS)

Bignoli, G.; Bertozzi, G.

1979-01-01

The aim of this report is to present a compilation and description of models to assess the environmental behaviour and effects of accidental and routine releases of artificial radioactivity from nuclear power facilities. About 60 models are described and a card is given for each one, to indicate in summarized form its features and data content. This collection is intended to help in developing specific personal models by assembling different parts chosen among the most suitable ones of different models of various degrees of sophistication

Survey of radioactive effluent releases from byproduct material facilities. Technical report

International Nuclear Information System (INIS)

Cook, J.R.

1981-08-01

A survey of over 3,000 NRC byproduct material licensees was conducted in late 1980 to collect data on annual effluent releases of radioactivity. The survey was conducted through a questionnaire, which was sent to NRC licensees who handle radioactive material in unsealed form, i.e., research, medical, and industrial institutions. Principal findings from the survey analysis are as follows: More than 98% of the reported annual releases to air (484 to 490) yield calculated average concentrations at the boundary of the unrestricted area that were at 1% or less than the maximum permissible concentration (MPC) of Appendix B, Table II, Column 1 of 10 CFR 20. The largest reported annual release was estimated to yield a concentration that was approximately 12% of MPC, the 5 other releases ranged from 1 to 10% of MPC. All reported annual releases of liquid waste were within the limits specified by NRC with most facilities reporting annual releases of only a fraction of a curie. Based on the data provided by licensees and analyzed in this report, it appears that in general the environmental impacts from research, medical and industrial institutions and organizations licensed by the NRC to possess and use byproduct materials are minimal and correspond to a small fraction of that from natural background

Release procedures and disposal of radioactive residual substances at the Medical University Hanover (MHH)

International Nuclear Information System (INIS)

Scheller, F.; Behrendt, R.; Harke, H.

2005-01-01

The disposal of all radioactive residual packages of the MHH is regulated by the German radiation protection ordinance from 26 th July 2001; shown in appendix III, table 1, column 5: unrestricted release of solid materials and liquids. All radioactive waste packages are collected and handled by the central MHH department for radiation protection. They are sorted for type, nuclide and specific radioactivity. A few packages can directly be released as conventional waste after performing incoming measurements showing very low activity concentrations. Longer living radionuclides with specific activities above the release limits have to be delivered to the national waste disposal. For direct measurements of gamma-emitting radionuclides we use two in-situ-measuring units (ISOCS, Canberra) and a special release unit with 9 plastic scintillators in a fixed geometry (FR-9 PVT, MED Medizintechnik). Fluid beta-emitting radionuclides are measured by taking a fraction and using liquid scintillation counting (LSC). Solid beta-emitting radionuclides activity are calculated. (orig.)

Radioactive materials released from nuclear power plants: Annual report, 1984

Energy Technology Data Exchange (ETDEWEB)

Tichler, J.; Norden, K.; Congemi, J.

1987-08-01

Releases of radioactive materials in airborne and liquid effluents from commercial light water reactors during 1984 have been compiled and reported. Data on solid waste shipments as well as selected operating information have been included. This report supplements earlier annual reports issued by the former Atomic Energy Commission and the Nuclear Regulatory Commission. The 1984 release data are summarized in tabular form. Data covering specific radionuclides are summarized.

Incident involving radioactive material at IAEA Safeguards Laboratory - No radioactivity released to environment

International Nuclear Information System (INIS)

2008-01-01

Full text: Pressure build-up in a small sealed sample bottle in a storage safe resulted in plutonium contamination of a storage room at about 02:30 today at the IAEA's Safeguards Analytical Laboratory in Seibersdorf. All indications are that there was no release of radioactivity to the environment. Further monitoring around the laboratory will be undertaken. No one was working in the laboratory at the time. The Laboratory's safety system detected plutonium contamination in the storage room where the safe was located and in two other rooms - subsequently confirmed by a team of IAEA radiation protection experts. The Laboratory is equipped with multiple safety systems, including an air-filtering system to prevent the release of radioactivity to the environment. There will be restricted access to the affected rooms until they are decontaminated. A full investigation of the incident will be conducted. The IAEA has informed the Austrian regulatory authority. The IAEA's Laboratory in Seibersdorf is located within the complex of the Austrian Research Centers Seibersdorf (ARC), about 35 km southeast of Vienna. The laboratory routinely analyses small samples of nuclear material (uranium or plutonium) as part of the IAEA's safeguards verification work. (IAEA)

Studies for improvement of regulatory control on the radioactive effluent released from nuclear facilities

International Nuclear Information System (INIS)

Cheong, Jae Hak; Park, H. M.; Song, M. C.; Lee, K. H.; Jang, J. K.; Chun, J. K.; Jeong, K. H.

2005-05-01

This report contains the second-year results of the research project titled 'Studies for Improvement of Regulatory Control on the Radioactive Effluent Released from Nuclear Facilities' and mainly provides technical and strategic approaches to improve performance of regulatory control on the gaseous effluent released from domestic nuclear facilities. The main result contained here includes overview and technical bases of radioactive gaseous effluent control (Chapter 1), reconsideration of the sensitivity requirements for measurement of radioactivity in gaseous effluent sample (Chapter 2), uncertainty analysis of the calculated radioactivity in gaseous effluent (Chapter 3), and improvement of quantification method of noble gas releases (Chapter 4). In addition, analysis of the impact due to combined sampling of particulate from multiple release points (Chapter 5), comparison of domestic nuclear reactors gaseous effluent data to foreign PWRs (Chapter 6), standardized sampling technique for collection of gaseous tritium (Chapter 7), and application of Xe-133 equivalent concept to gaseous effluent control (Chapter 8) are also provided. As a whole, this report provides a generic approach to improve the performance of regulatory control on the gaseous effluent. Therefore, actual enforcement of the recommendations should be preceded by establishment of a series of action plans reflecting on the site- and facility-specific design and operational features

Radioactivity release vs probability for a steam generator tube rupture accident

International Nuclear Information System (INIS)

Buslik, A.J.; Hall, R.E.

1978-01-01

A calculation of the probability of obtaining various radioactivity releases from a steam generator tube rupture (SGTR) is presented. The only radioactive isotopes considered are Iodine-131 and Xe-133. The particular accident path considered consists of a double-ended guillotine SGTR followed by loss of offsite power (LOSP). If there is no loss of offsite power, and no system fault other than the SGTR, it is judged that the consequences will be minimal, since the amount of iodine released through the condenser air ejector is expected to be quite small; this is a consequence of the fact that the concentration of iodine in the vapor released from the condenser air ejector is very small compared to that dissolved in the condensate water. In addition, in some plants the condenser air ejector flow is automatically diverted to containment or a high-activity alarm. The analysis presented here is for a typical Westinghouse PWR such as described in RESAR-3S

Offsite doses from SRP radioactive releases - 1985

International Nuclear Information System (INIS)

Marter, W.L.

1986-01-01

This memorandum summarizes the offsite doses from releases of radioactive materials to the environment from SRP operations in 1985. These doses were calculated for inclusion in the environmental report for 1985 to be issued by the Health Protection Department (DPSPU-86-30-1). The environmental report is prepared annually for distribution to state environmental agencies, the news media, and interested members of the public. More detailed data on offsite exposures by radionuclide and exposure pathway will be included in the environmental report

Sensitivity Analysis of Dousing Spray Trip on Radioactive Release in Pressure Tube Rupture Accident with Both End Fitting Failures

Energy Technology Data Exchange (ETDEWEB)

Jang, M. S.; Kang, H. S; Kim, S. R. [NESS, Daejeon (Korea, Republic of)

2015-10-15

We analyzed the sensitivity analysis of dousing spray trip conditions on radioactive release. In terms of conservativeness, the set 1 trip would be more appropriate in RR analysis than set 2 trip, which is the general condition of RR analysis. Radioactive releases from the containment building is related to containment air pressure, which increases by the coolant discharge from loss of coolant accident and the actuation conditions of dousing spray and so on. In LOCA analysis, the dousing spray trip conditions are set for the analysis objectives; for peak pressure (PP), for pressure signal (PS), for radioactive release (RR) and etc. In RR analysis, we would determine the dousing spray trip condition to increase radioactive release to the public for conservatism. Therefore, we carried out the sensitivity analysis of dousing spray trip condition on radioactive release from containment building using GOTHIC and SMART program for CANDU.

Air radioactivity: to assess risks. Tools answer citizen questions. The Opera-Air network: the journey of a filter

International Nuclear Information System (INIS)

Didier, Damien; Gariel, Jean-Christophe; Bruno, Valerie; Debayle, Christophe

2017-01-01

Very highly efficient filters containing a porous glass fibre fabric are used in industrial installations to trap radioactive or toxic particles in order to limit their release, notably in accidental situations. Thus this set of articles discusses various issues related to the use of such filters. A first one describes how air radioactivity is continuously monitored by two coexisting networks: Opera-Air and Teleray. It indicates where air radioactivity comes from, and how the origin of a release can be determined, and outlines the importance of modelling tools. Air monitoring about the Gravelines nuclear power plant is briefly presented with a drawing. A second article comments the existence of numerous tools which are used as information channels about the monitoring of air radioactivity: web sites, mobile application, and so on. The last article briefly describes the journey of a filter from its removal on a Monday to a complete and validated analysis which lasts between two and four weeks

Final Report: Safety of Plasma-Facing Components and Aerosol Transport During Hard Disruptions and Accidental Energy Release in Fusion Reactor

International Nuclear Information System (INIS)

Bourham, Mohamed A.; Gilligan, John G.

1999-01-01

Safety considerations in large future fusion reactors like ITER are important before licensing the reactor. Several scenarios are considered hazardous, which include safety of plasma-facing components during hard disruptions, high heat fluxes and thermal stresses during normal operation, accidental energy release, and aerosol formation and transport. Disruption events, in large tokamaks like ITER, are expected to produce local heat fluxes on plasma-facing components, which may exceed 100 GW/m 2 over a period of about 0.1 ms. As a result, the surface temperature dramatically increases, which results in surface melting and vaporization, and produces thermal stresses and surface erosion. Plasma-facing components safety issues extends to cover a wide range of possible scenarios, including disruption severity and the impact of plasma-facing components on disruption parameters, accidental energy release and short/long term LOCA's, and formation of airborne particles by convective current transport during a LOVA (water/air ingress disruption) accident scenario. Study, and evaluation of, disruption-induced aerosol generation and mobilization is essential to characterize database on particulate formation and distribution for large future fusion tokamak reactor like ITER. In order to provide database relevant to ITER, the SIRENS electrothermal plasma facility at NCSU has been modified to closely simulate heat fluxes expected in ITER

The choice of individual dose criterion at which to restrict agricultural produce following an unplanned release of radioactive material to atmosphere

CERN Document Server

Dionian, J

1985-01-01

In the event of an accidental release of radioactive material to atmosphere, the introduction of emergency countermeasures will be based on the need to limit the risk to individuals. However, it has been suggested that a form of cost-benefit analysis may be used as an input to decisions on the withdrawal of countermeasures, although it is recognised that these decisions may be influenced by factors other than those directly related to radiological protection. In this study, a method based on cost-benefit analysis is illustrated for assessing the optimum level of individual dose at which restrictions on agricultural production may be considered. This requires monetary values to be assigned to both the lost food production and to the health detriment, expressed as the collective effective dose equivalent commitment. It has been assumed in this analysis that food-supply restrictions are both introduced and withdrawn at the same projected level of annual individual dose. The effect on the optimum dose level of th...

Methods for determining the release of radioactive material into the environment

International Nuclear Information System (INIS)

Farges, L.; Daw, H.T.

1976-01-01

The current policy on the discharge of radioactive effluents calls for the containment of radioactive wastes in most instances. The resulting doses to individuals and populations have been shown by many surveys to be very small (UNSCEAR Report, 1972). Nevertheless, small amounts of radioactive releases are made to the environment during normal operation of nuclear facilities. Whenever discharge of radioactive effluents to the environment is permitted, careful consideration is made of all the relevant factors which might lead to exposure of man. However, with the expansion of nuclear power programmes, more sophistication is required in setting discharge limits to the environment, taking into consideration future sources as well as present sources. The IAEA's recommendations conform to the dose limitation system set out by the International Commission on Radiological Protection (ICRP). The system implies that the individual dose limits should never be exceeded. Furthermore, the ICRP guidelines require that doses be kept as low as reasonably possible, taking social and economic considerations into account. This second objective, usually called optimization, implies the use of differential cost-benefit analysis. At present, decisions are still made by other procedures, for example, by applying safety factors to release limits derived only from the dose limits. However, the ICRP system of dose limitation, including optimization, appears to be a more rational approach to the establishment of release limits. Thus, it is necessary to provide basic material on concepts which are intended for use and decision making by national authorities, and the Agency plans to publish a series of complementary documents on the application of these concepts to various specific cases. (author)

Site-sensitive hazards of potential airborne radioactive release from sources on the Kola peninsula

International Nuclear Information System (INIS)

Bergman, R.; Thaning, L.; Baklanov, A.

1998-02-01

In this work we focus on cases of airborne releases from some of the sources on the Kola Peninsula - primarily nuclear reactors on submarines and the Kola Nuclear Power Plant (KNPP). The purpose of our study is to illustrate, and discuss some features - dependent on site and release characteristics - of the deposition patterns resulting from assumed unit radioactive releases to the atmosphere from a location at a fjord and from the KNPP in Polyarnye Zori. Using meteorological data for one real weather situation, the analysis is based on simulating the transport in air of assumed radioactive releases and estimating the deposition pattern on local, meso- and regional scales. By allowing unit releases to occur simultaneously from the site at the fjord and from the power plant (and with the same release profile in time) comparisons are made of differences in deposition patterns in and outside the Kola region. In this case study a set of assumed release heights, durations of the release, and particle size distributions are applied to indicate the dependence for the resulting deposition pattern on these parameters

Results of ten years study of Chernobyl NPP release fallout properties and behaviour in soils

International Nuclear Information System (INIS)

Ivanov, Yu.; Kashparov, V.A.; Levchuk, S.; Protsak, V.; Zvaritch, S.; Khomutinin, Yu.; Oreshich, L.

1997-01-01

Radioactive contamination of territories of Ukrainian and Byelorussian Polesye as a result of ChNPP accidental release is characterized by high level of un-homogenity of fallout properties (physico-chemical properties, radionuclide composition etc.), density of the territory contamination by long-lived radionuclides. On the other hand, the soil-plant cover of contaminated territory is presented by large set of soils, characterized by contrast physico-chemical and water-physical properties. Peculiarities of the behavior of different radionuclides, represented initially by various components of radioactive fallout, in soils, as a first link of migration chains are considered

An analytical model for radioactive pollutant release simulation in the atmospheric boundary layer

International Nuclear Information System (INIS)

Weymar, Guilherme J.; Vilhena, Marco T.; Bodmann, Bardo E.J.; Buske, Daniela; Quadros, Regis

2013-01-01

Simulations of emission of radioactive substances in the atmosphere from the Brazilian nuclear power plant Angra 1 are a necessary tool for control and elaboration of emergency plans as a preventive action for possible accidents. In the present work we present an analytical solution for radioactive pollutant dispersion in the atmosphere, solving the time-dependent three-dimensional advection-diffusion equation. The experiment here used as a reference in the simulations consisted of the controlled releases of radioactive tritiated water vapor from the meteorological tower close to the power plant at Itaorna Beach. The wind profile was determined using experimental meteorological data and the micrometeorological parameters were calculated from empirical equations obtained in the literature. We report on a novel analytical formulation for the concentration of products of a radioactive chain released in the atmospheric boundary layer and solve the set of coupled equations for each chain radionuclide by the GILTT solution, assuming the decay of all progenitors radionuclide for each equation as source term. Further we report on numerical simulations, as an explicit but fictitious example and consider three radionuclides in the radioactive chain of Uranium 235. (author)

An analytical model for radioactive pollutant release simulation in the atmospheric boundary layer

Energy Technology Data Exchange (ETDEWEB)

Weymar, Guilherme J.; Vilhena, Marco T.; Bodmann, Bardo E.J., E-mail: guicefetrs@gmail.com, E-mail: mtmbvilhena@gmail.com, E-mail: bejbodmann@gmail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica; Buske, Daniela; Quadros, Regis, E-mail: danielabuske@gmail.com, E-mail: quadros99@gmail.com [Universidade Federal de Pelotas (UFPel), Capao do Leao, RS (Brazil). Programa de Pos-Graduacao em Modelagem Matematica

2013-07-01

Simulations of emission of radioactive substances in the atmosphere from the Brazilian nuclear power plant Angra 1 are a necessary tool for control and elaboration of emergency plans as a preventive action for possible accidents. In the present work we present an analytical solution for radioactive pollutant dispersion in the atmosphere, solving the time-dependent three-dimensional advection-diffusion equation. The experiment here used as a reference in the simulations consisted of the controlled releases of radioactive tritiated water vapor from the meteorological tower close to the power plant at Itaorna Beach. The wind profile was determined using experimental meteorological data and the micrometeorological parameters were calculated from empirical equations obtained in the literature. We report on a novel analytical formulation for the concentration of products of a radioactive chain released in the atmospheric boundary layer and solve the set of coupled equations for each chain radionuclide by the GILTT solution, assuming the decay of all progenitors radionuclide for each equation as source term. Further we report on numerical simulations, as an explicit but fictitious example and consider three radionuclides in the radioactive chain of Uranium 235. (author)

Use of OND-86 recommendations for calculation of the Shelter radioactive release

International Nuclear Information System (INIS)

Bogatov, S.A.

2000-01-01

A model of radioactive release from the Shelter has been considered under current operation conditions. Integral assessment of current dust release has been done on the base of natural ventilation rate. Model predictions are consistent (20% accuracy) with experimental results of air contamination measurements at the earth surface. 12 refs., 1 tab., 6 figs

Guidelines on the medical therapy of persons accidentally overexposed to ionizing radiations. External contamination

International Nuclear Information System (INIS)

Perez, M.R.; Di Trano, J.L.; Gisone, P.

1998-01-01

The document represents a guide for the external decontamination of persons accidentally radio contaminated due to the use, production or transport of radioactive materials. The general conditions, from the medical point of view, to be kept in mind, in the event of accidental overexposures as decontamination treatment and the handling of samples are detailed throughout report. The external contamination without injury in skin or with wound its considered. The distribution of measures and responsibilities for the therapy of the irradiated patients with radioactive materials are enumerated. The preparations of decontaminate solutions are detailed in this work. Moreover, forms for the reception, physical evaluation of the patient and external contamination are presented. (author)

Wind field forecast for accidental release of radiative materials

International Nuclear Information System (INIS)

Kang Ling; Chen Jiayi; Cai Xuhui

2003-01-01

A meso-scale wind field forecast model was designed for emergency environmental assessment in case of accidental release of radiative materials from a nuclear power station. Actual practice of the model showed that it runs fast, has wind field prediction function, and the result given is accurate. With meteorological data collected from weather stations, and pre-treated by a wind field diagnostic model, the initial wind fields at different times were inputted as initial values and assimilation fields for the forecasting model. The model, in turn, worked out to forecast meso-scale wind field of 24 hours in a horizontal domain of 205 km x 205 km. And then, the diagnostic model was employed again with the forecasting data to obtain more detail information of disturbed wind field by local terrain in a smaller domain of 20.5 km x 20.5 km, of which the nuclear power station is at the center. Using observation data in January, April, July and October of 1996 over the area of Hangzhou Bay, wind fields in these 4 months were simulated by different assimilation time and number of the weather stations for a sensitive test. Results indicated that the method used here has increased accuracy of the forecasted wind fields. And incorporating diagnostic method with the wind field forecast model has greatly increased efficiency of the wind field forecast for the smaller domain. This model and scheme have been used in Environmental Consequence Assessment System of Nuclear Accident in Qinshan Area

Plant air quality following accidental radioactive releases

International Nuclear Information System (INIS)

Slawson, P.R.; Hitchman, G.J.

1987-01-01

Radionuclides exhausted to the atmosphere through vent stacks may contaminate the immediate building structure and/or nearby adjacent buildings resulting in hazardous contaminants entering the intake air. The objective of the work reported here was to obtain an overview of the analytical and experimental tools available to evaluate the transport and diffusion of vented effluents, and the nature of flows about structures, in order to predict the concentrations adjacent to an subsequently inside the immediate and nearby structures. A scaling analysis established the requirements for physical modelling of flows about structures in wind and/or water tunnels. Subsequently, a series of test model studies were conducted in a water tunnel in the Mechanical Engineering Department of the University of Waterloo. The expected result that increased stack height and structure separation have on reducing recirculation and interference is clearly illustrated. Interference was still significant on the downstream structure when the vent stack height was increased to its maximum of one model cube height above the cube. A literature survey was conducted to establish the nature and mathematical modelling of flows about structures. Also, mathematical modelling of the concentration field from roof-top vent effluents and subsequently the models for predicting concentrations within structures was investigated. No specific data on concentrations within structures were found. There is a strong need for well documented test on the concentration fields about model structures, with which more generic models may be developed. Very little data is available on multiple structures. It is recommended that physical model studies be conducted, that simulate realistic exhaust and intake air vents with measurement of both the inside and the outside concentration fields. (59 refs., 21 figs., 2 tabs.)

Retention and subsequent release of radioactivity from the incineration of wastes containing microspheres

International Nuclear Information System (INIS)

Emery, R.J.; Watson, J.E. Jr.

1990-01-01

Incineration is the preferred method for disposing of animal carcasses containing radioactive microspheres at the authors University. Routine surveys of ash from successive nonradioactive burns revealed significant contamination from previously incinerated microspheres. Past studies on microsphere incineration quantified the amount of activity retained in ash, but did not address any subsequent releases. This topic was not considered in earlier studies because, in most cases, the carcasses were placed in some type of container to facilitate recovery of ash, preventing contamination of the incinerator refractory. In this study, five sets of controlled burns were performed to quantify the subsequent releases of the microsphere radioisotopes 141 Ce, 113 Sn, 102 Ru, 95 Nb, and 46 Sc. Each set consisted of three successive burns. The first burn of each set incinerated a non-radioactive carcass, the second burn, a radioactive carcass, and the third, a non-radioactive carcass. In all of the burns, the carcasses were placed directly on the incinerator refractory floor, which is the standard procedure during normal operations

Problems concerning food production, supply and use caused by radioactive deposition: A study directed towards needs for early decision making after radioactive fallout

International Nuclear Information System (INIS)

Bergman, R.

1995-12-01

The primary aim of this study is to analyze and describe how a radioactive deposition after nuclear weapons employment outside Sweden would affect the domestic food production in a short time perspective and in the sequence of events from primary production over processing and transport to food consumption. The study is an attempt at a comprehensive treatment of knowledge needed as a basis for decisions on operative issues, often of a time-urgent nature. Actions to alleviate the problems pertinent to the food supply in the event of radioactive fallout are also discussed, although without any claim of exhaustive coverage. Other aspects, as the economical consequences of the disturbances due to the fallout situation (or of possible counteractions) are not dealt with, however. With certain restrictions mentioned in the text the results are also applicable in connection with radioactive deposition caused by accidental release from a nuclear power plant. 60 refs, 32 figs

Regionalized study of the impact of an accidental radioactive pollution on a permanent meadow; Etude regionalisee de l'impact d'une pollution radioactive accidentelle sur une prairie permanente

Energy Technology Data Exchange (ETDEWEB)

Durand, V.; Mercat-Rommens, C

2006-07-01

The objective of this study consists in evaluating the sensitivity of the first part of the die grass-milk with respect to an accidental radioactive discharge. We want to know if a single uniform deposit would involve a contamination of the grazing grass identical on the scale of the own territory. The study was based on the A.S.T.R.A.L. model, a computer code developed by the I.R.S.N. which makes it possible to evaluate the transfer of the radionuclides in the terrestrial food chain following an accidental atmospheric emission. The way of transfer of A.S.T.R.A.L. on which the study focused is the transfer of the deposit to milk, via the grazing grass ingestion. The sensitivity of this way of transfer relies on several parameters: captation, yield, cows food rates and dates of setting to grass. Methodology thus consisted in regionalizing these parameters. The software S.T.I.C.S. developed by the I.N.R.A. of Avignon was then used. This model proposes a daily follow-up of the leaf area index which has been correlated with captation and with the production of fresh biomass (yield). (authors)

Releases of radioactivity at the Savannah River Plant, 1954-1980

Energy Technology Data Exchange (ETDEWEB)

Ashley, C.; Zeigler, C. C.; Culp, P. A.

1982-01-01

This report contains summaries of releases of radioactivity to onsite seepage basins and to plant effluents for each year since plant startup (1954 through 1980). Releases for the years 1954 through 1959 were reassessed in 1974 and assigned release values for specific long-lived radionuclides. These long-lived radionuclides (half-lives greater than 1 year) are the only radionuclides included for the years 1954 through 1970. Since 1970 all detectable radionuclides have been included. Measured migration o radionuclides from F-, H-, and K-Area seepage basins and desorption of /sup 137/Cs from the Four Mile Creek stream bed are included in Summary B of this report. Summaries of monthly releases for 1979 and 1980 and total SRP releases by radionuclide in three categories: liquid to seepage basins, liquid to streams, and atmospheric are also included. Monthly releases for 1979 are included because the 1979 issue of this report was not published. All 1979 data are included in this report.

Accidental Release of Chlorine from a Storage Facility and an On-Site Emergency Mock Drill: A Case Study

Directory of Open Access Journals (Sweden)

Ambalathumpara Raman Soman

2015-01-01

Full Text Available In the current industrial scenario there is a serious need for formulating strategies to handle hazardous substances in the safest way. Manufacture, storage, and use of hazardous substances pose a serious risk to industry, people, and the environment. Accidental release of toxic chemicals can lead to emergencies. An emergency response plan (ERP is inevitable to minimize the adverse effects of such releases. The on-site emergency plan is an integral component of any process safety and risk management system. This paper deals with an on-site emergency response plan for a chlorine manufacturing industry. It was developed on the basis of a previous study on chlorine release and a full scale mock drill has been conducted for testing the plan. Results indicated that properly trained personnel can effectively handle each level of incidents occurring in the process plant. As an extensive guideline to the district level government authorities for off-site emergency planning, risk zone has also been estimated with reference to a chlorine exposure threshold of 3 ppm.

Nuclear refugees after large radioactive releases

International Nuclear Information System (INIS)

Pascucci-Cahen, Ludivine; Groell, Jérôme

2016-01-01

However improbable, large radioactive releases from a nuclear power plant would entail major consequences for the surrounding population. In Fukushima, 80,000 people had to evacuate the most contaminated areas around the NPP for a prolonged period of time. These people have been called “nuclear refugees”. The paper first argues that the number of nuclear refugees is a better measure of the severity of radiological consequences than the number of fatalities, although the latter is widely used to assess other catastrophic events such as earthquakes or tsunami. It is a valuable partial indicator in the context of comprehensive studies of overall consequences. Section 2 makes a clear distinction between long-term relocation and emergency evacuation and proposes a method to estimate the number of refugees. Section 3 examines the distribution of nuclear refugees with respect to weather and release site. The distribution is asymmetric and fat-tailed: unfavorable weather can lead to the contamination of large areas of land; large cities have in turn a higher probability of being contaminated. - Highlights: • Number of refugees is a good indicator of the severity of radiological consequences. • It is a better measure of the long-term consequences than the number of fatalities. • A representative meteorological sample should be sufficiently large. • The number of refugees highly depends on the release site in a country like France.

Portable Filtered Air Suction System for Released Radioactive Gases Prevention under a Severe Accident of NPPs

International Nuclear Information System (INIS)

Gu, Beom W.; Choi, Su Y.; Rim, Chun T.

2013-01-01

In this paper, the portable filtered air suction system (PoFASS) for released radioactive gases prevention under a severe accident of NPP is proposed. This technology can prevent the release of the radioactive gases to the atmosphere and it can be more economical than FVCS because PoFASS can cover many NPPs with its high mobility. The conceptual design of PoFASS, which has the highest cost effectiveness and robustness to the environment condition such as wind velocity and precipitation, is suggested and the related previous research is introduced in this paper. The portable filtered air suction system (PoFASS) for released radioactive gases prevention can play a key role to mitigate the severe accident of NPP with its high cost effectiveness and robustness to the environment conditions. As further works, the detail design of PoFASS to fabricate a prototype for a demonstration will be proceeded. When released radioactive gases from the broken containment building in the severe accident of nuclear power plants (NPPs) such as the Chernobyl and Fukushima accidents occur, there are no ways to prevent the released radioactive gases spreading in the air. In order to solve this problem, several European NPPs have adopted the filtered vented containment system (FVCS), which can avoid the containment failure through a pressure relief capability to protect the containment building against overpressure. However, the installation cost of FVCS for a NPP is more than $10 million and this system has not been widely welcomed by NPP operating companies due to its high cost

Freedom: a transient fission-product release model for radioactive and stable species

International Nuclear Information System (INIS)

Macdonald, L.D.; Lewis, B.J.; Iglesias, F.C.

1989-05-01

A microstructure-dependent fission-gas release and swelling model (FREEDOM) has been developed for UO 2 fuel. The model describes the transient release behaviour for both the radioactive and stable fission-product species. The model can be applied over the full range of operating conditions, as well as for accident conditions that result in high fuel temperatures. The model accounts for lattice diffusion and grain-boundary sweeping of fusion products to the grain boundaries, where the fission gases accumulate in grain-face bubbles as a result of vacancy diffusion. Release of fission-gas to the free void of the fuel element occurs through the interlinkage of bubbles and cracks on the grain boundaries. This treatment also accounts for radioactive chain decay and neutron-induced transmutation effects. These phenomena are described by mass balance equations which are numerically solved using a moving-boundary, finite-element method with mesh refinement. The effects of grain-face bubbles on fuel swelling and fuel thermal conductivity are included in the ELESIM fuel performance code. FREEDOM has an accuracy of better than 1% when assessed against an analytic solution for diffusional release. The code is being evaluated against a fuel performance database for stable gas release, and against sweep-gas and in-cell fission-product release experiments at Chalk River for active species

Hydrological dispersion of radioactive material in relation to nuclear power plant siting

International Nuclear Information System (INIS)

1985-01-01

This Guide discusses the dispersion of normal and accidental releases of radioactive materials from nuclear power plants into surface water, including the washout of airborne radionuclides, and gives recommendations on information to be collected during the various stages of the siting procedure, a minimum measurement programme and the selection and validation of appropriate mathematical models for predicting dispersion. Guidelines are also provided for the optimal use of models for a specific site situation and for defining the necessary input parameters. Results of existing validation studies are given

Underground Nuclear Explosions and Release of Radioactive Noble Gases

Science.gov (United States)

Dubasov, Yuri V.

2010-05-01

Over a period in 1961-1990 496 underground nuclear tests and explosions of different purpose and in different rocks were conducted in the Soviet Union at Semipalatinsk and anovaya Zemlya Test Sites. A total of 340 underground nuclear tests were conducted at the Semipalatinsk Test Site. One hundred seventy-nine explosions (52.6%) among them were classified as these of complete containment, 145 explosions (42.6%) as explosions with weak release of radioactive noble gases (RNG), 12 explosions (3.5%) as explosions with nonstandard radiation situation, and four excavation explosions with ground ejection (1.1%). Thirty-nine nuclear tests had been conducted at the Novaya Zemlya Test Site; six of them - in shafts. In 14 tests (36%) there were no RNG release. Twenty-three tests have been accompanied by RNG release into the atmosphere without sedimental contamination. Nonstandard radiation situation occurred in two tests. In incomplete containment explosions both early-time RNG release (up to ~1 h) and late-time release from 1 to 28 h after the explosion were observed. Sometimes gas release took place for several days, and it occurred either through tunnel portal or epicentral zone, depending on atmospheric air temperature.

Spent fuel transportation on highways: the radioactive dose to the traffic

International Nuclear Information System (INIS)

Yadigaroglu, G.

1975-01-01

The radioactive exposure of the traffic moving on the same highway as spent fuel shipments has been neglected in the past. Methods developed for calculating peak exposures, the number of individuals receiving a dose in excess of a certain limiting value, and the cumulative population doses for the occupants of the vehicles under a variety of highway and accident conditions allow comparisons to the corresponding stationary-population doses. Consideration of both routine direct-radiation exposures and accidental releases indicates that the traffic doses can be of equal or greater importance than the stationary-population doses

Cask for radioactive material and method for preventing release of neutrons from radioactive material

International Nuclear Information System (INIS)

Gaffney, M.F.; Shaffer, P.T.

1981-01-01

A cask for radioactive material, such as nuclear reactor fuel or spent nuclear reactor fuel, includes a plurality of associated walled internal compartments for containing such radioactive material, with neutron absorbing material present to absorb neutrons emitted by the radioactive material, and a plurality of thermally conductive members, such as longitudinal copper or aluminum castings, about the compartment and in thermal contact with the compartment walls and with other such thermally conductive members and having thermal contact surfaces between such members extending, preferably radially, from the compartment walls to external surfaces of the thermally conductive members, which surfaces are preferably in the form of a cylinder. The ends of the shipping cask also preferably include a neutron absorber and a conductive metal covering to dissipate heat released by decay of the radioactive material. A preferred neutron absorber utilized is boron carbide, preferably as plasma sprayed with metal powder or as particles in a matrix of phenolic polymer, and the compartment walls are preferably of stainless steel, copper or other corrosion resistant and heat conductive metal or alloy. The invention also relates to shipping casks, storage casks and other containers for radioactive materials in which a plurality of internal compartments for such material, e.g., nuclear reactor fuel rods, are joined together, preferably in modular construction with surrounding heat conductive metal members, and the modules are joined together to form a major part of a finished shipping cask, which is preferably of cylindrical shape. Also within the invention are methods of safely storing radioactive materials which emit neutrons, while dissipating the heat thereof, and of manufacturing the present shipping casks

International comparison on radioactive releases of PWR between 1975 and 1988

International Nuclear Information System (INIS)

Benedittini, M.; Tabare, M.

1990-02-01

This report presents the main results of a comparison on radioactive releases from 135 PWRs in the following countries: Belgium, Federal Republic of Germany, Finland, France, Japan, Sweden, Switzerland and the United States. For liquid releases, distinctions have been undertaken between tritium and no tritium activities and for gaseous releases between noble gases and halogens-aerosols. Data has been collected from literature published or by contacting utilities administrative staff or authorities in order to constitute a data base. As regards this comparison however, reactors, the commercial operation of which started prior to July 1974, have been excluded [fr

Radioactive iodine releases from nuclear power plant, (1)

International Nuclear Information System (INIS)

Hashimoto, Tatsuya

1974-01-01

Concerning the release of radioactive iodine from nuclear power plants, the guidelines and data both in Japan and abroad are briefed, including those in the United States, Tsuruga nuclear power station and working Group of the Environmental Radiation Study Committee. In case of the Tsuruga nuclear power station, the radiation dose and other data for a few years are presented. Parameters and factors proposed by the working group cover such as the dose through food intake and respiration, concentration factor, etc. (Mori, K.)

Analysis of a Radioactive Release in a Nuclear Waste Disposal Facility

Energy Technology Data Exchange (ETDEWEB)

Poppiti, James [Dept. of Energy, Washington, DC (United States); Nelson, Roger [Dept. of Energy, Carlsbad, NM (United States); MacMillan, Walter J. [Nuclear Waste Partners, Carlsbad, NM (United States); Cunningham, Scott

2017-07-01

The Waste Isolation Pilot Plant (WIPP) is a 655-meter deep mine near Carlsbad, New Mexico, used to dispose the nation’s defense transuranic waste. Limited airborne radioactivity was released from a container of radioactive waste in WIPP on 14 February, 2014. As designed, a mine ventilation filtration system prevented the large scale release of contamination from the underground. However, isolation dampers leaked, which allowed the release of low levels of contaminants after the event until they were sealed. None of the exposed individuals received any recordable dose. While surface contamination was limited, contamination in the ventilation system and portions of the underground was substantial. High efficiency particulate air (HEPA) filters in the operating ventilation system ensure continued containment during recovery and resumption of disposal operations. However, ventilation flow is restricted since the incident, with all exhaust air directed through the filters. Decontamination and natural fixation by the hygroscopic nature of the salt host rock has reduced the likelihood of further contamination spread. Contamination control and ventilation system operability are crucial for resumption of operations. This article provides an operational assessment and evaluation of these two key areas.

Analysis of a Radioactive Release in a Nuclear Waste Disposal Facility

International Nuclear Information System (INIS)

Poppiti, James; Nelson, Roger; MacMillan, Walter J.; Cunningham, Scott

2017-01-01

The Waste Isolation Pilot Plant (WIPP) is a 655-meter deep mine near Carlsbad, New Mexico, used to dispose the nation's defense transuranic waste. Limited airborne radioactivity was released from a container of radioactive waste in WIPP on 14 February, 2014. As designed, a mine ventilation filtration system prevented the large scale release of contamination from the underground. However, isolation dampers leaked, which allowed the release of low levels of contaminants after the event until they were sealed. None of the exposed individuals received any recordable dose. While surface contamination was limited, contamination in the ventilation system and portions of the underground was substantial. High efficiency particulate air (HEPA) filters in the operating ventilation system ensure continued containment during recovery and resumption of disposal operations. However, ventilation flow is restricted since the incident, with all exhaust air directed through the filters. Decontamination and natural fixation by the hygroscopic nature of the salt host rock has reduced the likelihood of further contamination spread. Contamination control and ventilation system operability are crucial for resumption of operations. This article provides an operational assessment and evaluation of these two key areas.

Calculation of releases of radioactive materials in gaseous effluents from nuclear-powered merchant ships (NMS-GEFF code)

International Nuclear Information System (INIS)

Cardile, F.P.; Bangart, R.L.; Collins, J.T.

1978-06-01

The Intergovernmental Maritime Consultative Organization IMCO) is currently preparing guidelines concerning the safety of nuclear-powered merchant ships. An important aspect of these guidelines is the determination of the releases of radioactive material in effluents from these ships and the control exercised by the ships over these releases. To provide a method for the determination of these releases, the NRC staff has developed a computerized model, the NMS-GEFF Code, which is described in the following chapters. The NMS-GEFF Code calculates releases of radioactive material in gaseous effluents for nuclear-powered merchant ships using pressurized water reactors

Conditioning the radioactive oils released from the Cernavoda NPP operation

International Nuclear Information System (INIS)

Popescu, I.; Deneanu, N.; Dulama, M.; Baboiescu, E.

2001-01-01

The radioactive oils released during the Cernavoda NPP operation are lubricating oils used in the primary circuit pumps, hydraulic oils used in the reactor charging machine, as well as, waste turbine oils. The primary cooling circuit is the main way of contamination. This waste contain variable amounts of tritium of activities up to 10 8 Bq/l and relatively small amounts of β/γ emitting radionuclides. The radioactive oils resulting of the heat transport system may contain as much as 1.8 TBq/l of tritium. At INR Pitesti, Department of Radioactive Waste Processing, studies were done concerning the radioactive oils conditioning in concrete. It was found that the minimal compression level required for disposal, of 50 MPa, was exceeded. As consequence, the conditioned waste fulfils the conditions of acceptance provided by the Radioactive Waste National Repository at Baita-Bihor. The main stages of the process are: - dosing the radioactive oil, water and NOFOX9 and NOFOX4 emulsion additives for the 220 l or 80 l barrel; - mixing these ingredients up to reaching the emulsion state; - dosing the cement and lime; - adding the enhancing silicate and shaking the mixture to get a homogeneous matrix; - closing the barrel; - conditioning the 80 l barrel within the 220 l container. The production capacity is of 5 to 8 barrels/shift

Study of stowage of radioactive materials packagings in accidental conditions

International Nuclear Information System (INIS)

Chevalier, G.; Gilles, P.; Phalippou, C.; Pouard, M.; Draulans, J.; Lafontaine, I.

1987-03-01

The study of transport conditions shows that few data are available on accidental conditions. Two types of accidents are selected and defined by calculations and tests. Sizing of stowage is determined for a frontal shock (35 g deceleration), maintaining the packaging on the vehicle, and side shock rupture of the stowage system for a determined stress. Mathematical formulations are developed [fr

Air modelling as an alternative to sampling for low-level radioactive airborne releases

International Nuclear Information System (INIS)

Morgenstern, M.Y.; Hueske, K.

1995-01-01

This paper describes our efforts to assess the effect of airborne releases at one DOE laboratory using air modelling based on historical data. Among the facilities affected by these developments is Los Alamos National Laboratory (LANL) in New Mexico. RCRA, as amended by the Hazardous and Solid Waste Amendments (HSWA) in 1984, requires all facilities which involve the treatment, storage, and disposal of hazardous waste obtain a RCRA/HSWA waste facility permit. LANL complied with CEARP by initiating a process of identifying potential release sites associated with LANL operations prior to filing a RCRA/HSWA permit application. In the process of preparing the RCRA/HSWA waste facility permit application to the U.S. Environmental Protection Agency (EPA), a total of 603 Solid Waste Management Units (SWMUs) were identified as part of the requirements of the HSWA Module VIH permit requirements. The HSWA Module VIII permit requires LANL to determine whether there have been any releases of hazardous waste or hazardous constituents from SWMUs at the facility dating from the 1940's by performing a RCRA Facility Investigation to address known or suspected releases from specified SWMUs to affected media (i.e. soil, groundwater, surface water, and air). Among the most troublesome of the potential releases sites are those associated with airborne radioactive releases. In order to assess health risks associated with radioactive contaminants in a manner consistent with exposure standards currently in place, the DOE and LANL have established Screening Action Levels (SALs) for radioactive soil contamination. The SALs for each radionuclide in soil are derived from calculations based on a residential scenario in which individuals are exposed to contaminated soil via inhalation and ingestion as well as external exposure to gamma emitters in the soil. The applicable SALs are shown

Implementation of the Clean Air Act, Title III, Section 112(r) Prevention of Accidental Release Rule requirements at U.S. DOE Oak Ridge Reservation facilities

International Nuclear Information System (INIS)

Humphreys, M.P.

1997-01-01

Title III, Section 112(r) of the Clean Air Act (CAA) Amendments of 1990 requires the Environmental Protection Agency (EPA) to promulgate regulations to prevent accidental releases of regulated substances and to reduce the severity of those releases that do occur. The final EPA rule for Risk Management Programs under Section 112(r)(7) of the CAA, promulgated June 20, 1996, applies to all stationary sources with processes that contain more than a threshold quantity of any of 139 regulated substances listed under 40 CFR 68.130. All affected sources will be required to prepare a risk management plan which must be submitted to EPA and be made available to state and local governments and to the public. This paper will provide details of initiatives underway at US Department of Energy (DOE) Oak Ridge Reservation (ORR) Facilities for implementation of the Prevention of Accidental Release Rule. The ORR encompasses three DOE Facilities: the Y-12 Plant, Oak Ridge National Laboratory (ORNL), and the K-25 Site. The Y-12 Plant manufactures component parts for the national nuclear weapons program; the ORNL is responsible for research and development activities including nuclear engineering, engineering technologies, and the environmental sciences; and the K-25 Site conducts a variety of research and development activities and is the home of a mixed waste incinerator. ORR activities underway and soon to be undertaken toward implementation of the Prevention of Accidental Release Rule include: compilation of inventories of regulated substances at all processes at each of the three ORR Facilities for determination of affected processes and facilities; plans for inventory reduction to levels below threshold quantities, where necessary and feasible; determination of the overlap of processes subject to the OSHA PSM Standard and determination of parallel requirements; preparation of Risk Management Plans and Programs for affected processes and facilities including detailed requirements

Safety assessment for Area 5 radioactive-waste-management site

International Nuclear Information System (INIS)

Hunter, P.H.; Card, D.H.; Horton, K.

1982-09-01

The Area 5 Radioactive Waste Management Safety Assessment Document contains evaluations of site characteristics, facilities, and operating practices that contribute to the safe handling, storage, and disposal of low-level radioactive wastes at the Nevada Test Site. Physical geography, cultural factors, climate and meteorology, geology, hydrology (with emphasis on radionuclide migration), ecology, natural phenomena, and natural resources are discussed and determined to be suitable for effective containment of radionuclides. A separate section considers facilities and operating practices such as monitoring, storage/disposal criteria, site maintenance, equipment, and support. The section also considers the transportation and waste handling requirements supporting the new Greater Confinement Disposal Facility (GCDF), GCDF demonstration project, and other requirements for the safe handling, storage, and disposal of low-level radioactive wastes. Finally, the document provides an analysis of releases and an assessment of the near-term operational impacts and dose commitments to operating personnel and the general public from normal operations and anticipated accidental occurrences. The conclusion of this report is that the Area 5 Radioactive Waste Management Site is suitable for low-level radioactive waste handling, storage, and disposal. Also, the new GCDF demonstration project will not affect the overall safety of the Area 5 Radioactive Waste Management Site

Radioactive waste management for a radiologically contaminated hospitalized patient

International Nuclear Information System (INIS)

Pina Jomir, G.; Michel, X.; Lecompte, Y.; Chianea, N.; Cazoulat, A.

2015-01-01

Radioactive waste management in the post-accidental phase following caring for a radiologically contaminated patient in a hospital decontamination facility must be anticipated at a local level to be truly efficient, as the volume of waste could be substantial. This management must comply with the principles set out for radioactive as well as medical waste. The first step involves identification of radiologically contaminated waste based on radioactivity measurement for volume reduction. Then, the management depends on the longest radioactive half-life of contaminative radionuclides. For a half-life inferior to 100 days, wastes are stored for their radioactivity to decay for at least 10 periods before disposal like conventional medical waste. Long-lived radioactive waste management implies treatment of liquid waste and special handling for sorting and packaging before final elimination at the French National Agency for Radioactive Waste Management (ANDRA). Following this, highly specialized waste management skills, financial responsibility issues and detention of non-medical radioactive sources are questions raised by hospital radioactive waste management in the post-accidental phase. (authors)

Radioactive wastes

International Nuclear Information System (INIS)

Straub, C.P.

1975-01-01

A review is presented on the environmental behavior of radioactive wastes. The management of high-level wastes and waste disposal methods were discussed. Some topics included were ore processing, coagulation, absorption and ion exchange, fixation, ground disposal, flotation, evaporation, transmutation and extraterrestrial disposal. Reports were given of the 226 Ra, 224 Ra and tritium activity in hot springs, 90 Sr concentrations in the groundwater and in White Oak Creek, radionuclide content of algae, grasses and plankton, radionuclides in the Danube River, Hudson River, Pacific Ocean, Atlantic Ocean, Lake Michigan, Columbia River and other surface waters. Analysis showed that 239 Pu was scavenged from Lake Michigan water by phytoplankton and algae by a concentration factor of up to 10,000. Benthic invertebrates and fish showed higher 239 Pu concentrations than did their pelagic counterparts. Concentration factors are also given for 234 Th, 60 Co, Fe and Mr in marine organisms. Two models for predicting the impact of radioactivity in the food chain on man were mentioned. In an accidental release from a light-water power reactor to the ocean, the most important radionuclides discharged were found to be 90 Sr, 137 Cs, 239 Pu and activation products 65 Zr, 59 Fe, and 95 Zr

Radioactive materials released from nuclear power plants. Annual report, 1982. Volume 3

International Nuclear Information System (INIS)

Tichler, J.; Norden, K.

1986-02-01

Releases of radioactive materials in airborne and liquid effluents from commercial light water reactors during 1982 have been compiled and reported. Data on solid waste shipments as well as selected operating information have been included. This report supplements earlier annual reports issued by the former Atomic Energy Commission and the Nuclear Regulatory Commission. The 1982 release data are summarized in tabular form. Data covering specific radionuclides are summarized

International coordination of activities for establishing protective measures for the case of accidental release of radioactivity

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

The document discussed here has been submitted to the WHO Regional Committee as a basis for discussion on the international coordination of protective measures in case of large-area radioactive contamination. The document presents the following: a summary of actions taken by the regional office in response to the Chernobyl reactor accident, and of the national and international measures for public health protection after the accident; brief review of actions taken by other international organisations, and the activities proposed by the WHO on a European and on a global level. (orig./HSCH).

On-site test of filters in nuclear facilities using radioactive sodium chloride (24Na)-aerosol and methyl iodide (131I)

International Nuclear Information System (INIS)

Heidam, N.Z.; Hansen, K.A.; Fenger, J.; Flyger, H.; Hedemann Jensen, P.

1986-02-01

The nuclar facilities at Risoe National Laboratory are equipped with high-efficiency filters to protect the environment from routine or accidental releases of radioactive material. The filter efficiency must be tested regularly and a method for on-site control is described. It is based on injection of a radioactive sample in the filter duct, followed by sampling before and after the filter. HEPA-filters are tested with a 24 NaCl-aerosol and charcoal filters with 131 ICH 3 . Normally samples of 1 mCi are used. Penetrations (1 - efficiency) can be determined with a relative uncertainty of 10-15%. (author)

Control of synthesis and release of radioactive acetylcholine in brain slices from the rat. Effects of neurotropic drugs

Science.gov (United States)

Grewaal, D. S.; Quastel, J. H.

1973-01-01

1. Studies of the synthesis and release of radioactive acetylcholine in rat brain-cortex slices incubated in Locke–bicarbonate–[U-14C]glucose media, containing paraoxon as cholinesterase inhibitor, revealed the following phenomena: (a) dependence of K+-or protoveratrine-stimulated acetylcholine synthesis and release on the presence of Na+ and Ca2+ in the incubation medium, (b) enhanced release of radioactive acetylcholine by substances that promote depolarization at the nerve cell membrane (e.g. high K+, ouabain, protoveratrine, sodium l-glutamate, high concentration of acetylcholine), (c) failure of acetylcholine synthesis to keep pace with acetylcholine release under certain conditions (e.g. the presence of ouabain or lack of Na+). 2. Stimulation by K+ of radioactive acetylcholine synthesis was directly proportional to the external concentration of Na+, but some synthesis and release of radioactive acetylcholine occurred in the absence of Na+ as well as in the absence of Ca2+. 3. The Na+ dependence of K+-stimulated acetylcholine synthesis was partly due to suppression of choline transport, as addition of small concentrations of choline partly neutralized the effect of Na+ lack, and partly due to the suppression of the activity of the Na+ pump. 4. Protoveratrine caused a greatly increased release of radioactive acetylcholine without stimulating total radioactive acetylcholine synthesis. Protoveratrine was ineffective in the absence of Ca2+ from the incubation medium. It completely blocked K+ stimulation of acetylcholine synthesis and release. 5. Tetrodotoxin abolished the effects of protoveratrine on acetylcholine release. It had blocking effects (partial or complete) on the action of high K+, sodium l-glutamate and lack of Ca2+ on acetylcholine synthesis and release. 6. Unlabelled exogenous acetylcholine did not diminish the content of labelled tissue acetylcholine, derived from labelled glucose, suggesting that no exchange with vesicular acetylcholine took

Release of radioactive fission products from BN-600 reactor untight fuel elements

International Nuclear Information System (INIS)

Osipov, S.L.; Tsikunov, A.G.; Lisitsin, E.C.

1996-01-01

The experimental data on the release of radioactive fission products from BN-600 reactor untight fuel elements are given in the report. Various groups of radionuclides: inert gases Xe, Kr, volatile Cs, J, non-volatile Nb, and La are considered. The results of calculation-experimental study of transfer and distribution of radionuclides in the reactor primary circuit, gas system and sodium coolant are considered. It is shown that some complex radioactivity transfer processes can be described by simple mathematical models. (author)

On-site radioactive soil contamination at the Andreeva Bay shore technical base, Northwest Russia.

Science.gov (United States)

Reistad, O; Dowdall, M; Selnaes, Ø G; Standring, W J F; Hustveit, S; Steenhuisen, F; Sørlie, A

2008-07-01

The radioactive waste (RAW) storage site at Andreeva Bay in the Russian Northwest has experienced radioactive contamination both as a result of activities carried out at the site and due to incidents that have occurred there in the past such as accidental releases of radioactive materials. The site is an interesting case study for decommissioning due to the extremely large amounts of radioactivity present at the site and the conditions under which it is stored; very little has been previously published in the scientific literature about this site. This paper complements the paper describing dose rates at Andreeva Bay which is published in this issue of Journal of Environmental Radioactivity by the same authors. This study presents new data related to the activity concentrations of (137)Cs and (90)Sr in surface soils and measurements of alpha- and beta-particle fluxes taken at different areas around the site. Limited data on 60Co is also presented. The results of the study indicate that the main areas of site contamination are associated with the former spent nuclear fuel storage facility at Building 5, due to accidental discharges which began in 1982. Substantial contamination is also observed at the solid radioactive waste storage facilities, probably due to the ingress of water into these facilities. More than 240 samples were measured: maximum contamination levels were 1 x 10(6)Bq/kg (137)Cs (mean value 4.1 x 10(5)Bq/kg) and 4 x 10(6)Bq/kg (90)Sr (mean value 1.2 x1 0(5)Bq/kg). Localised patches of alpha and beta contamination were also observed throughout the site.

Coincidence counting corrections for dead time losses and accidental coincidences

International Nuclear Information System (INIS)

Wyllie, H.A.

1987-04-01

An equation is derived for the calculation of the radioactivity of a source from the results of coincidence counting taking into account the dead-time losses and accidental coincidences. The derivation is an extension of the method of J. Bryant [Int. J. Appl. Radiat. Isot., 14:143, 1963]. The improvement on Bryant's formula has been verified by experiment

Elements to diminish radioactive accidents; Elementos para disminuir accidentes radiactivos

Energy Technology Data Exchange (ETDEWEB)

Cortes I, M.E.; Ramirez G, F.P. [Instituto Mexicano del Petroleo, Eje Central Lazaro Cardenas 152, C.P. 07730 Mexico D.F. (Mexico)

1998-12-31

In this work it is presented an application of the cause-effect diagram method or Ichikawa method identifying the elements that allow to diminish accidents when the radioactive materials are transported. It is considered the transport of hazardous materials which include radioactive materials in the period: December 1996 until March 1997. Among the identified elements by this method it is possible to mention: the road type, the radioactive source protection, the grade driver responsibility and the preparation that the OEP has in the radioactive material management. It is showed the differences found between the country inner roads and the Mexico City area. (Author)

Application of two-barrier model of radioactive agent transport in sea water for analyzing artificial radionuclide release from containers with radioactive waste dumped in Kara Sea

Energy Technology Data Exchange (ETDEWEB)

Grishin, Denis S.; Laykin, Andrey I.; Kuchin, Nickolay L.; Platovskikh, Yuri A. [Krylov State Research Center, Saint Petersburg, 44 Moskovskoe shosse, 196158 (Russian Federation)

2014-07-01

Modeling of artificial radionuclide transport in sea water is crucial for prognosis of radioecological situation in regions where dumping of radioactive waste had been made and/or accidents with nuclear submarines had taken place. Distribution of artificial radionuclides in bottom sediments can be a detector of radionuclide release from dumped or sunk objects to marine environment. Proper model can determine the dependence between radionuclide distribution in sediments and radionuclide release. Following report describes two-barrier model of radioactive agent transport in sea water. It was tested on data from 1994 - 2013 expeditions to Novaya Zemlya bays, where regular dumping of solid radioactive waste was practiced by the former USSR from the early 1960's until 1990. Two-barrier model agrees with experimental data and allows more accurate determination of time and intensity of artificial radionuclide release from dumped containers. (authors)

The regulation of radioactive effluent release in France (mainly from large nuclear installations)

International Nuclear Information System (INIS)

Hebert, Jean.

1978-01-01

In parallel with the licensing system for construction and operation of classified or so-called large nuclear installations (INB) there are in France regulations for the release of radioactive effuents from such installations. The regulations applicable to installations other than INBs are not specifically of a nuclear nature, while those covering INBs, which are analysed in this study, in particular, cover effluent release in liquid or gaseous form. The licensing and control procedures for such release are analysed in detail. (NEA) [fr

Modeling the wind-fields of accidental releases with an operational regional forecast model

International Nuclear Information System (INIS)

Albritton, J.R.; Lee, R.L.; Sugiyama, G.

1995-01-01

The Atmospheric Release Advisory Capability (ARAC) is an operational emergency preparedness and response organization supported primarily by the Departments of Energy and Defense. ARAC can provide real-time assessments of atmospheric releases of radioactive materials at any location in the world. ARAC uses robust three-dimensional atmospheric transport and dispersion models, extensive geophysical and dose-factor databases, meteorological data-acquisition systems, and an experienced staff. Although it was originally conceived and developed as an emergency response and assessment service for nuclear accidents, the ARAC system has been adapted to also simulate non-radiological hazardous releases. For example, in 1991 ARAC responded to three major events: the oil fires in Kuwait, the eruption of Mt. Pinatubo in the Philippines, and the herbicide spill into the upper Sacramento River in California. ARAC's operational simulation system, includes two three-dimensional finite-difference models: a diagnostic wind-field scheme, and a Lagrangian particle-in-cell transport and dispersion scheme. The meteorological component of ARAC's real-time response system employs models using real-time data from all available stations near the accident site to generate a wind-field for input to the transport and dispersion model. Here we report on simulation studies of past and potential release sites to show that even in the absence of local meteorological observational data, readily available gridded analysis and forecast data and a prognostic model, the Navy Operational Regional Atmospheric Prediction System, applied at an appropriate grid resolution can successfully simulate complex local flows

A Bayesian Analysis of the Radioactive Releases of Fukushima

DEFF Research Database (Denmark)

Tomioka, Ryota; Mørup, Morten

2012-01-01

the types of nuclides and their levels of concentration from the recorded mixture of radiations to take necessary measures. We presently formulate a Bayesian generative model for the data available on radioactive releases from the Fukushima Daiichi disaster across Japan. From the sparsely sampled...... the Fukushima Daiichi plant we establish that the model is able to account for the data. We further demonstrate how the model extends to include all the available measurements recorded throughout Japan. The model can be considered a first attempt to apply Bayesian learning unsupervised in order to give a more......The Fukushima Daiichi disaster 11 March, 2011 is considered the largest nuclear accident since the 1986 Chernobyl disaster and has been rated at level 7 on the International Nuclear Event Scale. As different radioactive materials have different effects to human body, it is important to know...

A high-performance liquid chromatography method for the serotonin release assay is equivalent to the radioactive method.

Science.gov (United States)

Sono-Koree, N K; Crist, R A; Frank, E L; Rodgers, G M; Smock, K J

2016-02-01

The serotonin release assay (SRA) is considered the gold standard laboratory test for heparin-induced thrombocytopenia (HIT). The historic SRA method uses platelets loaded with radiolabeled serotonin to evaluate platelet activation by HIT immune complexes. However, a nonradioactive method is desirable. We report the performance characteristics of a high-performance liquid chromatography (HPLC) SRA method. We validated the performance characteristics of an HPLC-SRA method, including correlation with a reference laboratory using the radioactive method. Serotonin released from reagent platelets was quantified by HPLC using fluorescent detection. Results were expressed as % release and classified as positive, negative, or indeterminate based on previously published cutoffs. Serum samples from 250 subjects with suspected HIT were tested in the HPLC-SRA and with the radioactive method. Concordant classifications were observed in 230 samples (92%). Sera from 41 healthy individuals tested negative. Between-run imprecision studies showed standard deviation of performance characteristics, equivalent to the historic radioactive method, but avoids the complexities of working with radioactivity. © 2015 John Wiley & Sons Ltd.

Monitoring water for radioactive releases in the United States

International Nuclear Information System (INIS)

Porter, C.R.; Broadway, J.A.; Kahn, B.

1990-01-01

The major radiological environmental monitoring programs for water in the United States are described. The applications of these programs for monitoring radioactive fallout, routine discharges from nuclear facilities, and releases due to accidents at such facilities are discussed, and some examples of measurements are presented. The programs monitor rainfall, surface water, and water supplies. Samples are usually collected and analyzed on a monthly or quarterly schedule, but the frequency is increased in response to emergencies. (author)

The choice of individual dose criterion at which to restrict agricultural produce following an unplanned release of radioactive material to atmosphere

International Nuclear Information System (INIS)

Dionian, J.; Simmonds, J.R.

1985-06-01

In the event of an accidental release of radioactive material to atmosphere, the introduction of emergency countermeasures will be based on the need to limit the risk to individuals. However, it has been suggested that a form of cost-benefit analysis may be used as an input to decisions on the withdrawal of countermeasures, although it is recognised that these decisions may be influenced by factors other than those directly related to radiological protection. In this study, a method based on cost-benefit analysis is illustrated for assessing the optimum level of individual dose at which restrictions on agricultural production may be considered. This requires monetary values to be assigned to both the lost food production and to the health detriment, expressed as the collective effective dose equivalent commitment. It has been assumed in this analysis that food-supply restrictions are both introduced and withdrawn at the same projected level of annual individual dose. The effect on the optimum dose level of the following parameters is examined: the type of produce restricted; the size of the release; the site and direction of the release; the weather conditions; and the cost assigned to unit collective dose. It is shown that the optimum dose criterion, based on the effective dose equivalent received by an individual from a years intake of food, varies over practically the whole range of individual dose considered, i.e., 0.1 to 50 mSv. However, it is concluded that 5 mSv would represent the optimum dose criterion in a substantial number of cases. (author)

Modelling of tritium dispersion from postulated accidental release of nuclear power plants

International Nuclear Information System (INIS)

Soares, Abner Duarte

2010-01-01

This study has the aim to assess the impact of accidental release of tritium postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models of hydrodynamics and transport for the simulation of tritium dispersion caused by an accident in a CANDU reactor located in the ongoing Angra 3 site. This exercise was accomplished with the aid of a code system (SisBAHIA) developed in the Rio de Janeiro Federal University (COPPE/UFRJ). The CANDU reactor is one that uses heavy water (D 2 O) as moderator and coolant of the core. It was postulated, then, the LOCA (Loss of Coolant Accident) accident in the emergency cooling system of the nucleus (without fusion), where was lost 66 m 3 of soda almost instantaneously. This inventory contained 35 PBq and was released a load of 9.7 TBq/s in liquid form near the Itaorna beach, Angra dos Reis - RJ. The models mentioned above were applied in two scenarios (plant stopped and operating) and showed a tritium plume with specific activities larger than the reference level for seawater (1.1 MBq/m 3 ) during the first 14 days after the accident. The main difference between the scenario without and with seawater recirculation (pumping and discharge) is based on the enhancement of dilution of the highest concentrations in the last one. This dilution enhancement resulting in decreasing concentrations was observed only during the first two weeks, when they ranged from 1x10 9 to 5x10 5 Bq/m 3 close to the Itaorna beach spreading just to Sandri Island. After 180 days, the plume could not be detected anymore in the bay, because their activities would be lower than the minimum detectable value ( 3 ). (author)

New approaches to deriving limits of the release of radioactive material into the environment

International Nuclear Information System (INIS)

Lindell, B.

1977-01-01

During the last few years, new principles have been developed for the limitation of the release of radioactive material into the environment. It is no longer considered appropriate to base the limitation on limits for the concentrations of the various radionuclides in air and water effluents. Such limits would not prevent large amounts of radioactive material from reaching the environment should effluent rates be high. A common practice has been to identify critical radionuclides and critical pathways and to base the limitation on authorized dose limits for local ''critical groups''. If this were the only limitation, however, larger releases could be permitted after installing either higher stacks or equipment to retain the more short-lived radionuclides for decay before release. Continued release at such limits would then lead to considerably higher exposure at a distance than if no such installation had been made. Accordingly there would be no immediate control of overlapping exposures from several sources, nor would the system guarantee control of the future situation. The new principles described in this paper take the future into account by limiting the annual dose commitments rather than the annual doses. They also offer means of controlling the global situation by limiting not only doses in critical groups but also global collective doses. Their objective is not only to ensure that individual dose limits will always be respected but also to meet the requirement that ''all doses be kept as low as reasonably achievable''. The new approach is based on the most recent recommendations by the ICRP and has been described in a report by an IAEA panel (Procedures for establishing limits for the release of radioactive material into the environment). It has been applied in the development of new Swedish release regulations, which illustrate some of the problems which arise in the practical application

New approaches to deriving limits of the release of radioactive material into the environment

International Nuclear Information System (INIS)

Lindell, B.

1977-01-01

During the last few years, new principles have been developed for the limitation of the release of radioactive material into the environment. It is no longer considered appropriate to base the limitation on limits for the concentrations of the various radionuclides in air and water effluents. Such limits would not prevent large amounts of radioactive material from reaching the environment should effluent rates be high. A common practice has been to identify critical radionuclides and critical pathways and to base the limitation on authorized dose limits for local ''critical groups''. If this were the only limitation, however, larger releases could be permitted after installing either higher stacks or equipment to retain the more shortlived radionuclides for decay before release. Continued release at such limits would then lead to considerably higher exposure at a distance than if no such installation had been made. Accordingly there would be no immediate control of overlapping exposures from several sources, nor would the system guarantee control of the future situation. The new principles described in this paper take the future into account by limiting the annual dose commitments rather than the annual doses. They also offer means of controlling the global situation by limiting not only doses in critical groups but also global collective doses. Their objective is not only to ensure that individual dose limits will always be respected but also to meet the requirement that ''all doses be kept as low as reasonably achievable''. The new approach is based on the most recent recommendations by the ICRP and has been described in a report by an IAEA panel (Procedures for Establishing Limits for the Release of Radioactive Material into the Environment). It has been applied in the development of new Swedish release regulations, which illustrate some of the problems which arise in the practical application. (author)

Regulatory analysis on criteria for the release of patients administered radioactive material

International Nuclear Information System (INIS)

Schneider, S.; McGuire, S.A.

1994-05-01

The Nuclear Regulatory Commission (NRC) has received two petitions to amend its regulations in 10 CFR Parts 20 and 35 as they apply to doses received by members of the public exposed to patients released from a hospital after they have been administered radioactive material. While the two petitions are not identical they both request that the NRC establish a dose limit of 5 millisieverts (0.5 rem) per year for individuals exposed to patients who have been administered radioactive materials. This Regulatory Analysis evaluates three alternatives. Alternative 1 is for the NRC to amend its patient release criteria in 10 CFR 35.75 to use the more stringent dose limit of 1 millisievert per year in 10 CFR 20.1301(a) for its patient release criteria. Alternative 2 is for the NRC to continue using the existing patient release criteria in 10 CFR 35.75 of 1,110 megabecquerels of activity or a dose rate at one meter from the patient of 0.05 millisievert per hour. Alternative 3 is for the NRC to amend the patient release criteria in 10 CFR 35.75 to specify a dose limit of 5 millisieverts for patient release. The evaluation indicates that Alternative 1 would cause a prohibitively large increase in the national health care cost from retaining patients in a hospital longer and would cause significant personal and psychological costs to patients and their families. The choice of Alternatives 2 or 3 would affect only thyroid cancer patients treated with iodine-131. For those patients, Alternative 3 would result in less hospitalization than Alternative 2. Alternative 3 has a potential decrease in national health care cost of $30,000,000 per year but would increase the potential collective dose from released therapy patients by about 2,700 person-rem per year, mainly to family members

Regulatory analysis on criteria for the release of patients administered radioactive material

Energy Technology Data Exchange (ETDEWEB)

Schneider, S.; McGuire, S.A. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Regulatory Applications; Behling, U.H.; Behling, K.; Goldin, D. [Cohen (S.) and Associates, Inc., McLean, VA (United States)

1994-05-01

The Nuclear Regulatory Commission (NRC) has received two petitions to amend its regulations in 10 CFR Parts 20 and 35 as they apply to doses received by members of the public exposed to patients released from a hospital after they have been administered radioactive material. While the two petitions are not identical they both request that the NRC establish a dose limit of 5 millisieverts (0.5 rem) per year for individuals exposed to patients who have been administered radioactive materials. This Regulatory Analysis evaluates three alternatives. Alternative 1 is for the NRC to amend its patient release criteria in 10 CFR 35.75 to use the more stringent dose limit of 1 millisievert per year in 10 CFR 20.1301(a) for its patient release criteria. Alternative 2 is for the NRC to continue using the existing patient release criteria in 10 CFR 35.75 of 1,110 megabecquerels of activity or a dose rate at one meter from the patient of 0.05 millisievert per hour. Alternative 3 is for the NRC to amend the patient release criteria in 10 CFR 35.75 to specify a dose limit of 5 millisieverts for patient release. The evaluation indicates that Alternative 1 would cause a prohibitively large increase in the national health care cost from retaining patients in a hospital longer and would cause significant personal and psychological costs to patients and their families. The choice of Alternatives 2 or 3 would affect only thyroid cancer patients treated with iodine-131. For those patients, Alternative 3 would result in less hospitalization than Alternative 2. Alternative 3 has a potential decrease in national health care cost of $30,000,000 per year but would increase the potential collective dose from released therapy patients by about 2,700 person-rem per year, mainly to family members.

Parametric study of radioactive release from a breached containment

International Nuclear Information System (INIS)

Kenigsberg, A.; Hasan, D.; Elias, E.

1980-01-01

A hypothetical accident is analyzed, in which an external (out-of-plant) natural or man-made event causes a loss-of-coolant accident after penetrating the containment wall. The computer codes CONTEMPT and RELAP4 have been used to study the containment thermal-hydraulic behavior during the accident. Results are given in the form of graphs showing the thermal-hydraulic response of the containment and the profile of radioactive release to the atmosphere. The physical model and input data are discussed. 13 refs

Cleanup of radioactivity contamination in environment

International Nuclear Information System (INIS)

Kosako, Toshiso

1994-01-01

Environmental radioactivity cleanup is needed under a large scale accident in a reactor or in an RI irradiation facility which associates big disperse of radioactivities. Here, the fundamental concept including a radiation protection target, a period classification, planning, an information data base, etc. Then, the methods and measuring instruments on radioactivity contamination and the cleanup procedure are explained. Finally, the real site examples of accidental cleanup are presented for a future discussion. (author)

The IAEA inventory databases related to radioactive material entering the marine environment

International Nuclear Information System (INIS)

Rastogi, R.C.; Sjoeblom, K.L.

1999-01-01

Contracting Parties to the Convention on the Prevention of Marine Pollution by Dumping of Wastes and other Matter (LC 1972) have requested the IAEA to develop an inventory of radioactive material entering the marine environment from all sources. The rationale for developing and maintaining the inventory is related to its use as an information base with which the impact of radionuclides entering the marine environment from different sources can be assessed and compared. Five anthropogenic sources of radionuclides entering the marine environment can be identified. These sources are: radioactive waste disposal at sea; accidents and losses at sea involving radioactive material; discharge of low level liquid effluents from land-based nuclear facilities; the fallout from nuclear weapons testing; and accidental releases from land-based nuclear facilities. The first two of these sources are most closely related to the objective of the LC 1972 and its request to the IAEA. This paper deals with the Agency's work on developing a database on radioactive material entering the marine environment from these two sources. The database has the acronym RAMEM (RAdioactive Material Entering the Marine Environment). It includes two modules: inventory of radioactive waste disposal at sea and inventory of accidents and losses at sea involving radioactive material

MODELS SELECTED FOR CALCULATION OF DOSES, HEALTH EFFECTS AND ECONOMIC COSTS DUE TO ACCIDENTAL RADIONUCLIDE RELEASES FROM NUCLEAR POWER PLANTS

Energy Technology Data Exchange (ETDEWEB)

Strenge, D L; Baker, D A; Droppo, J G; McPherson, R B; Napier, B A; Nieves, L A; Soldat, J K

1980-05-01

Models are described for use in site-specific environmental consequence analysis of nuclear reactor accidents of Classes 3 through 9. The models presented relate radioactivity released to resulting doses, health effects, and costs of remedial actions. Specific models are presented for the major exposure pathways of airborne releases, waterborne releases and direct irradiation from activity within the facility buildings, such as the containment. Time-dependent atmospheric dispersion parameters, crop production parameters and other variable parameters are used in the models. The environmental effects are analyzed for several accident start times during the year.

Conceptual Design of Portable Filtered Air Suction Systems For Prevention of Released Radioactive Gas under Severe Accidents of NPP

Energy Technology Data Exchange (ETDEWEB)

Gu, Beom W.; Choi, Su Y.; Yim, Man S.; Rim, Chun T. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2014-05-15

It becomes evident that severe accidents may occur by unexpected disasters such as tsunami, heavy flood, or terror. Once radioactive material is released from NPP through severe accidents, there are no ways to prevent the released radioactive gas spreading in the air. As a remedy for this problem, the idea on the portable filtered air suction system (PoFASS) for the prevention of released radioactive gas under severe accidents was proposed. In this paper, the conceptual design of a PoFASS focusing on the number of robot fingers and robot arm rods are proposed. In order to design a flexible robot suction nozzle, mathematical models for the gaps which represent the lifted heights of extensible covers for given convex shapes of pipes and for the covered areas are developed. In addition, the system requirements for the design of the robot arms of PoFASS are proposed, which determine the accessible range of leakage points of released radioactive gas. In this paper, the conceptual designs of the flexible robot suction nozzle and robot arm have been conducted. As a result, the minimum number of robot fingers and robot arm rods are defined to be four and three, respectively. For further works, extensible cover designs on the flexible robot suction nozzle and the application of the PoFASS to the inside of NPP should be studied because the radioactive gas may be released from connection pipes between the containment building and auxiliary buildings.

Assessment of Radioactive Liquid Effluents Release at IPEN-CNEN/SP

International Nuclear Information System (INIS)

Bessa Nisti, Marcelo; Godoy dos Santos, Adir Janete

2008-01-01

A continuous effluent monitoring program has been established at IPEN's plant in order to allow an environmental impact assessment due to radioactive liquid effluent discharge to sanitary system. Representative samples of radioactive liquid effluents are analyzed by using high resolution gamma spectroscopy and instrumental neutron activation analysis, facing to Brazilian radioprotection regulatory rules. The results are consolidating yearly in the Institute source-term. In this paper, results of the source-term are presented, concerning to years 2004, 2005 and 2006. The total activity discharged was 8.5xl0 8 Bq, 5.7x10 8 Bq and 2.7xl0 8 Bq, respectively. As the release is strongly dependent on the total amount of the effluent and on the dilution factor, special attention is needed in order to obtain the correct value of that last one. The estimated inside plant dilution factor, considering the recent facilities and the reshaping of the sewerage system was 80, 180 and 130, for period of 2004, 2005 and 2006 discharged liquid radioactive effluent

Nuclear power: Accidental releases - practical guidance for public health action

International Nuclear Information System (INIS)

1987-01-01

The disaster at Chernobyl, USSR, has caused a major crisis of confidence in nuclear safety, and highlighted the need for comprehensive contingency planning for - and emergency response to - such accidents. This report gives practical guidance on how the authorities should deal with an accident in any type of nuclear installation, whether it involves accidental releases to the air or into water. It is based on principles developed in a previous WHO report published in 1984. It summarizes the range of accidents for which plans need to be made to protect the public, the measures to be taken and the levels of dose at which they should be applied. It indicates how to measure the levels of exposure and what are the most likely routes of exposure. It then outlines the problems faced by public health authorities and medical practitioners, and the administrative arrangements that will have to be made. The example used is of a standard pressurized light water reactor of the type currently used for electricity generation, but many of the features will be common to other nuclear installations as well. This report is addressed to those organizations and individuals responsible for public health in the event of a nuclear accident. It will also be of use to those medical practitioners who are not administratively responsible in an accident, but who may need to be aware of the consequences and of the action to be taken in the aftermath of an accident. Coordination is vital between the public health administration and the organizations with direct responsibilities in the event of an accident, and this report is essential reading for them all. 29 refs, 2 figs, 7 tabs

Reduction of releases of radioactive effluents from light-water-power-reactors in Japan

International Nuclear Information System (INIS)

Yoshida, Y.; Itakura, T.; Kanai, T.

1977-01-01

Japan Atomic Energy Commission established the dose objectives to the population around the light-water-reactors in May, 1975, based on the ''ALAP'' concept. These values are respectively, 5 mrems per year for total body and 15 mrems per year for thyroid of an individual in the critical group in the environs, due to both gaseous and liquid effluents from LWRs in one site. The present paper describes the implications of the dose objective values, control measures which have been adopted to reduce releases of radioactive materials and related technical developments in Japan. The main control measures for reduction of radioactive gaseous effluents are an installation of a charcoal gas holdup system for decay of noble gases and a supply of clean steam for the gland seal of a turbine in BWR, and a storage tank system allowing decay of noble gases in PWR. For liquid effluents are taken measures to re-use them as the primary coolant. Consequently, the amounts of radioactivity released to the environment from any LWR during normal operation have been maintained under the level to meet the above dose objective values. For research reactors, reduction of release of effluents has also been carried out in a similar way to LWRs. In order to establish the techniques applicable for further reduction, studies are being made on the control measures to reduce leakage of radioiodine, an apparatus for removal of krypton, the treatment of laundry waste and measures to remove the crud in the primary coolant. Presentation is also made on the energy-integrated gas monitor for gaseous effluent and systems of measuring γ dose from radioactive cloud descriminating from natural background, which have been developed for effective monitoring thus reduced environmental dose

Analysis of an LPG accidental release

Energy Technology Data Exchange (ETDEWEB)

Demichela, M.; Piccinini, N.; Poggio, A.

2004-03-01

An industrial LPG storage accident due to the release of propane from a tanker is described in this paper and the sequence of events that led to the collapse of a storage tank is examined using simulation software. A model taking both released flows into account as a radiant thermal contribution in the presence of flames is presented. The progression of the accident is assessed through digitalization and processing of the film of the fireball produced by about 500 L of LPG, whose diameter was calculated as approximately 50 m. (author)

Environmental radioactivity in Canada 1988

International Nuclear Information System (INIS)

1991-01-01

The radiological surveillance program of the Department of National Health and Welfare is conducted for the purpose of determining levels of environmental radioactivity in Canada and assessing the resulting population exposures. Following major changes to the CAMECO Port Hope operations to reduce uranium emissions, a study was initiated to measure uranium levels in air in the community. Studies continued on lung cancer and domestic exposure to radon, and current levels of cesium-137 in caribou, a major source of food in northern communities. The movement of tritium on the Ottawa and St. Lawrence rivers was studied following an accidental release into the Ottawa River. Monitoring continued of fallout contamination from Chernobyl in imported foods. All measurements recorded during 1988 were below the limits recommended by the International Commission on Radiological Protection. (14 refs., 14 figs., 15 tabs.)

Use of natural radionuclides to determine the time range of the accidental melting of an orphan radioactive source in a steel recycling plant.

Science.gov (United States)

Cantaluppi, Chiara; Ceccotto, Federica; Cianchi, Aldo

2012-02-01

In the rare event that an orphan radioactive source is melted in an Electric Arc Furnace steel recycling plant, the radionuclides present are partitioned in the different products, by-products and waste. As a consequence of an unforeseen melting of a radiocesium source, cesium radioisotopes can be found in the dust, together with many natural radionuclides from the decay of radon and thoron, which are present in the atmosphere, picked up from the off-gas evacuation system and associated with the dust of the air filtration system ("baghouse"). In this work we verified that the activity concentration of ²¹²Pb in this dust is essentially constant in a specific factory so that it is possible to use it to date back to the time of the accidental melting of the orphan radioactive source. The main features of this method are described below, together with the application to a particular case in which this method was used for dating the moment in which the dust was contaminated with ¹³⁷Cs. Copyright © 2011 Elsevier Ltd. All rights reserved.

Methodology for calculating radiation doses from radioactivity released to the environment

International Nuclear Information System (INIS)

Killough, G.G.; McKay, L.R.

1976-03-01

This document represents a compilation of the principal environmental transport and dosimetry models developed, adapted, and implemented by the Radiological Analyses and Applications Group of the Environmental Sciences Division of the Oak Ridge National Laboratory. The transport of released radioactivity through the natural environment is discussed in four sections: atmospheric dispersion, resuspension of material by wind action, terrestrial transport, and movement of material in underground water seepage. The discussion of dose to man and biota is divided into internal and external exposure sections. And finally, a developmental model (CONDOS) which estimates the dose to a population resulting from the manufacture, storage, distribution, use, and disposal of consumer products which contain radioactivity is described. Numerous tables are included

Report on international round table conference 'Accidental radiation contamination of food of animal origin'. Vol. I

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-07-01

The World Association of Veterinary Food Hygienists (WAVFH) held an international round table conference in Stockholm, Sweden, January 26-29, 1987. The topic of the conference was 'Accidental Radiation Contamination of Food of Animal Origin'. The agenda was divided into three major topic areas: 1. Ecological Science; 2. Veterinary Science - Live Animals; and 3. Veterinary Science - Food of Animal Origin. Experts and delegates from member countries presented papers, participated in discussions and workshops and produced a multidisciplinary report covering the topic areas. The recent accidental release of radioactive substances into the environment from the Chernobyl accident, demonstrated the need for veterinary, ecological, physical and medical sciences to be prepared to respond to an incident in order to protect the environment, food chain, other agricultural assets and humans from the adverse effects of radionuclides. Several presentations suggested that even with the best technologies, national and regional commitment, and relatively unrestricted resource levels, nuclear incidents can cross international boundaries and can contaminate the environment to the extent that the integrity of various food and water supplies can be at risk. Speakers and subsequent discussers tended to concentrate on the issues associated with lessening future environmental impacts if similar types of incidents should occur again.

Report on international round table conference 'Accidental radiation contamination of food of animal origin'. Vol. I

International Nuclear Information System (INIS)

1986-01-01

The World Association of Veterinary Food Hygienists (WAVFH) held an international round table conference in Stockholm, Sweden, January 26-29, 1987. The topic of the conference was 'Accidental Radiation Contamination of Food of Animal Origin'. The agenda was divided into three major topic areas: 1. Ecological Science; 2. Veterinary Science - Live Animals; and 3. Veterinary Science - Food of Animal Origin. Experts and delegates from member countries presented papers, participated in discussions and workshops and produced a multidisciplinary report covering the topic areas. The recent accidental release of radioactive substances into the environment from the Chernobyl accident, demonstrated the need for veterinary, ecological, physical and medical sciences to be prepared to respond to an incident in order to protect the environment, food chain, other agricultural assets and humans from the adverse effects of radionuclides. Several presentations suggested that even with the best technologies, national and regional commitment, and relatively unrestricted resource levels, nuclear incidents can cross international boundaries and can contaminate the environment to the extent that the integrity of various food and water supplies can be at risk. Speakers and subsequent discussers tended to concentrate on the issues associated with lessening future environmental impacts if similar types of incidents should occur again

Release of Radioactive Scrap Metal/Scrap Metal (RSM/SM) at Nevada Test Site (NTS)

International Nuclear Information System (INIS)

1993-01-01

Reynolds Electrical and Engineering Company, Inc. (REECo) is the prime contractor to the US Department of Energy (DOE) in providing service and support for NTS operations. Mercury Base Camp is the main control point for the many forward areas at NTS, which covers 1,350 square miles. The forward areas are where above-ground and underground nuclear tests have been performed over the last 41 years. No metal (or other material) is returned to Mercury without first being tested for radioactivity. No radioactive metals are allowed to reenter Mercury from the forward areas, other than testing equipment. RAMATROL is the monitor check point. They check material in various ways, including swipe tests, and have a large assortment of equipment for testing. Scrap metal is also checked to address Resource Conservation and Recovery Act concerns. After addressing these issues, the scrap metals are categorized. Federal Property Management Regulations (FPMR) are followed by REECo. The nonradioactive scrap material is sold through the GSA on a scheduled basis. Radioactive scrap metal are presently held in forward areas where they were used. REECo has gained approval of their Nevada Test Site Defense Waste Acceptance Criteria, Certification, and Transfer Requirements, NVO-325 application, which will allow disposal on site, when RSM is declared a waste. The guideline that REECo uses for release limits is DOE Order 5480.11, Radiation Protection for Occupational Works, Attachment 2, Surface Radioactivity Guides, of this order, give release limits for radioactive materials. However, the removal of radioactive materials from NTS require approval by DOE Nevada Operations Office (DOE/NV) on a case-by-case basis. Requirements to consider before removal are found in DOE Order 5820.2A, Radioactive Waste Management

Modeling of the dispersion of tritium from postulated accidental releases from nuclear power plants

International Nuclear Information System (INIS)

Aguiar, Andre Silva de; Simoes Filho, Francisco Fernando Lamego; Lapa, Celso Marcelo Franklin; Alvim, Antonio Carlos Marques; Soares, Abner Duarte

2013-01-01

This study has the aim to assess the impact of accidental release of tritium postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models of hydrodynamics and transport for the simulation of tritium dispersion caused by an accident in a CANDU reactor located in the ongoing Angra 3 site. It was postulated, then, the LOCA - Loss of Coolant Accident -, accident in the emergency cooling system of the nucleus ( without fusion), where was lost 66m 3 of soda almost instantaneously. This inventory contained 35 PBq and was released a load of 9.7 TBq/s in liquid form near the Itaorna beach, Angra dos Reis - RJ. The models mentioned above were applied in two scenarios ( plant stopped or operating) and showed a tritium plume with specific activities larger than the reference level for seawater (1.1MBq/m 3 ), during the first 14 days after the accident. The main difference between the scenario without and with seawater recirculation (pumping and discharge) is based on the enhancement of dilution of the highest concentrations in the last one. This dilution enhancement resulting in decreasing concentrations was observed only during the first two weeks, when they ranged from 1x10 9 to 5x10 5 Bq/m 3 close to the Itaorna beach spreading just to Sandri Island. After 180 days, the plume could not be detected anymore in the bay, because their activities would be lower than the minimum detectable value ( 3 ). (author)

Assessment of the public health impact from the accidental release of UF6 at the Sequoyah Fuels Corporation Facility at Gore, Oklahoma (Docket No. 40-8027, License No. SUB-1010). Main report. Volume 1

International Nuclear Information System (INIS)

1986-03-01

Following the accidental release of UF 6 from the Sequoyah Fuels Facility on January 4, 1986, an Ad Hoc Interagency Public Health Assessment Task Force was established. The Task Force consists of technical staff members from various agencies who have prepared this assessment of the public health impact associated with the accidental release. The assessment consists of two volumes and is based on data from the accident available as of February 14, 1986. Volume 1 of the report describes the effects from the intake of uranium and fluoride and summarizes the findings and recommendations of the Task Force. Volume 2 of the report contains Appendices which provide more detailed information used in the assessment and support the discussion in Volume 1. 57 refs., 26 figs., 12 tabs

Radioactivity of French coast of the Channel due to the release of technectium 99 and iodine 129: modelisation and measurements

International Nuclear Information System (INIS)

Robeau, D.; Patti, F.; Charmasson, S.

1988-01-01

Radioactive releases of Iodine 129 are controlled by measurements of the radioactivity in the liquid effluents before it is released in to the sea from the outlet of the reprocessing plant of La Hague. The effects on the marine environment are examined by a radioactive survey of Technecium 99 and Iodine 129 in Fucus (common seaweed). This radioactivity is measured along the north coast of France from Roscoff in the west of Brittany to Wimereux close to the Belgian frontier. The theoretical study of dispersion of radionuclides in the Channel has permitted a simulation model of the transfer of pollutants and particularly Technecium 99 and Iodine 129 to be formulated. (author)

Assessment of the Potential Release of Radioactivity from Installations at AERE, Harwell. Implications for Emergency Planning

Energy Technology Data Exchange (ETDEWEB)

Flew, Elizabeth M.; Lister, B. A.J. [Atomic Energy Research Establishment, Harwell, Didcot, Berks. (United Kingdom)

1969-10-15

As part of a review of the site emergency organization at AERE, a realistic reappraisal has been made of the potential hazard to the establishment and district of all the buildings containing significant amounts of radioactive materials. To assess the amount of radioactive material which might be released under specified accident conditions, four factors have been applied to the total building stock: (a) the fraction of the stock involved, (b) the percentage conversion to an aerosol form, (c) release from primary containment and (d) release from the building. These potential release figures have been compared with ''site hazardous release'' figures for relevant radionuclides i.e., amounts which could give rise to exposure above defined reference levels. Those buildings with more than one tenth of the potential for causing; a site or district hazard have been designated ''risk buildings''. Such a quantitative assessment, although necessarily very approximate, has been of considerable value in determining the type and complexity of the central emergency organization required and in producing the right emphasis on exercises, training, liaison with outside bodies, etc. (author)

Effective equivalent dose in the critical group due to release of radioactive effluents

International Nuclear Information System (INIS)

Santos, John W.A. dos; Varandas, Luciana R.; Souza, Denise N.; Souza, Cristiano B.F.; Lima, Sandro Leonardo N.; Mattos, Marcos Fernando M.; Moraes, Jose Adenildo T.

2005-01-01

To ensure that the emissions of radioactive material by liquid and gaseous pathways are below applicable limits it is necessary to evaluate the effective equivalent dose in the critical group, which is a magnitude that takes into consideration the modeling used and the terms radioactive activity source. The calculation of this dose considers each radionuclide released by the activity of Nuclear plant, liquid and gaseous by, and the sum of the values obtained is controlled so that this dose does not exceed the goals of the regulatory body, the CNEN and the goals established by the Nuclear power plant. To hit these targets various controls are used such as: controls for effluent monitors instrumentation, environmental monitoring programs, effluent release controls and dose calculation in the environment. According to the findings, it is concluded that during the period of operation of the plants, this dose is below of the required limits

Inverse modelling for real-time estimation of radiological consequences in the early stage of an accidental radioactivity release

Czech Academy of Sciences Publication Activity Database

Pecha, Petr; Šmídl, Václav

2016-01-01

Roč. 164, č. 1 (2016), s. 377-394 ISSN 0265-931X R&D Projects: GA MŠk(CZ) 7F14287; GA MV VG20102013018 Institutional support: RVO:67985556 Keywords : Inverse modelling * recursive radioactive plume tracking * Improvement of population protection * monitoring network capability Subject RIV: AQ - Safety, Health Protection, Human - Machine Impact factor: 2.310, year: 2016 http://library.utia.cas.cz/separaty/2016/AS/pecha-0460631.pdf

Radioactivity in Norwegian Waters: Distribution in seawater and sediments, and uptake in marine organisms

International Nuclear Information System (INIS)

Heldal, Hilde Elise

2001-01-01

Prior to the detonation of the first thermonuclear bomb, small amounts of radioactivity, for example in mineral water, were considered to be health enriching. Negative experiences related to thermonuclear bombs and several nuclear accidents have, however, changed people's attitude towards radioactivity during the past 40-50 years. Today, there is a common concern for regular and potential accidental releases of radioactivity from sources such as Sellafield. Although this is important, incorrect assessments of the effects of these releases (e.g. created by uncritical journalism) have the potential to harm the country's fisheries and economy. Therefore, it is of major importance to document up-to-date levels of radioactive contamination of the marine environment, and be able to place these into the proper perspectives. The main topics of the thesis may be summarised as follows: (1) Distribution of Caesium-137, Plutonium-238, Plutonium-239,240 and Americium-241 in sediments with emphasis on the Spitsbergen-Bear Island area, (2) Uptake of Caesium-137 in phytoplankton representative for the Barents and Norwegian Seas phytoplankton communities (laboratory experiments), (3) Bioaccumulation of Caesium-137 in food webs in the Barents and Norwegian Seas, (4) Geographical variations of Caesium-137 in harbour porpoises (Phocoena phocoena) along the Norwegian coast, (5) Transport times for Technetium-99 from Sellafield to various locations along the Norwegian coast and the Arctic Ocean

Radioactivity in Norwegian Waters: Distribution in seawater and sediments, and uptake in marine organisms

Energy Technology Data Exchange (ETDEWEB)

Heldal, Hilde Elise

2001-07-01

Prior to the detonation of the first thermonuclear bomb, small amounts of radioactivity, for example in mineral water, were considered to be health enriching. Negative experiences related to thermonuclear bombs and several nuclear accidents have, however, changed people's attitude towards radioactivity during the past 40-50 years. Today, there is a common concern for regular and potential accidental releases of radioactivity from sources such as Sellafield. Although this is important, incorrect assessments of the effects of these releases (e.g. created by uncritical journalism) have the potential to harm the country's fisheries and economy. Therefore, it is of major importance to document up-to-date levels of radioactive contamination of the marine environment, and be able to place these into the proper perspectives. The main topics of the thesis may be summarised as follows: (1) Distribution of Caesium-137, Plutonium-238, Plutonium-239,240 and Americium-241 in sediments with emphasis on the Spitsbergen-Bear Island area, (2) Uptake of Caesium-137 in phytoplankton representative for the Barents and Norwegian Seas phytoplankton communities (laboratory experiments), (3) Bioaccumulation of Caesium-137 in food webs in the Barents and Norwegian Seas, (4) Geographical variations of Caesium-137 in harbour porpoises (Phocoena phocoena) along the Norwegian coast, (5) Transport times for Technetium-99 from Sellafield to various locations along the Norwegian coast and the Arctic Ocean.

Radioactivity in Norwegian Waters: Distribution in seawater and sediments, and uptake in marine organisms

Energy Technology Data Exchange (ETDEWEB)

Heldal, Hilde Elise

2001-07-01

Prior to the detonation of the first thermonuclear bomb, small amounts of radioactivity, for example in mineral water, were considered to be health enriching. Negative experiences related to thermonuclear bombs and several nuclear accidents have, however, changed people's attitude towards radioactivity during the past 40-50 years. Today, there is a common concern for regular and potential accidental releases of radioactivity from sources such as Sellafield. Although this is important, incorrect assessments of the effects of these releases (e.g. created by uncritical journalism) have the potential to harm the country's fisheries and economy. Therefore, it is of major importance to document up-to-date levels of radioactive contamination of the marine environment, and be able to place these into the proper perspectives. The main topics of the thesis may be summarised as follows: (1) Distribution of Caesium-137, Plutonium-238, Plutonium-239,240 and Americium-241 in sediments with emphasis on the Spitsbergen-Bear Island area, (2) Uptake of Caesium-137 in phytoplankton representative for the Barents and Norwegian Seas phytoplankton communities (laboratory experiments), (3) Bioaccumulation of Caesium-137 in food webs in the Barents and Norwegian Seas, (4) Geographical variations of Caesium-137 in harbour porpoises (Phocoena phocoena) along the Norwegian coast, (5) Transport times for Technetium-99 from Sellafield to various locations along the Norwegian coast and the Arctic Ocean.

Risk assessment based on current release standards for radioactive surface contamination

International Nuclear Information System (INIS)

Chen, S.Y.

1993-09-01

Standards for uncontrolled releases of radioactive surface contamination have been in existence in the United States for about two decades. Such standards have been issued by various agencies, including the US Department of Energy. This paper reviews the technical basis of published standards, identifies areas in need of revision, provides risk interpretations based on current technical knowledge and the regulatory environment, and offers suggestions for improvements

The Barents Sea, its fisheries and past and present status of radioactive contamination, and its impacts on fisheries

International Nuclear Information System (INIS)

Foeyn, L.; Svaeren, I.

1995-01-01

For Norway and Russia the fisheries in the Barents Sea is of great importance. When the Chernobyl accident happened, almost two decades had passed without any systematic monitoring of the radioactivity in the Sea. The accident initiated new activity in this field at the Norwegian Institute of Marine Research. In 1990 a programme of sampling sediments, biota and water was started for, in the first hand, determination of radiocesium. The obtained results have shown that the fish resources as such of the Barents Sea have not yet been affected by anthropogenic radioactivity, neither during the nuclear bomb tests in the fifties and sixties, nor during recent years due to accidental releases. The fisheries may, however, be dramatically affected by the fact that the focus of media on radioactive contamination frightens people from eating fish. 11 refs., 1 fig

Development of emergency response tools for accidental radiological contamination of French coastal areas

International Nuclear Information System (INIS)

Duffa, Céline; Bailly du Bois, Pascal; Caillaud, Matthieu; Charmasson, Sabine; Couvez, Céline; Didier, Damien; Dumas, Franck; Fievet, Bruno; Morillon, Mehdi; Renaud, Philippe

2016-01-01

The Fukushima nuclear accident resulted in the largest ever accidental release of artificial radionuclides in coastal waters. This accident has shown the importance of marine assessment capabilities for emergency response and the need to develop tools for adequately predicting the evolution and potential impact of radioactive releases to the marine environment. The French Institute for Radiological Protection and Nuclear Safety (IRSN) equips its emergency response centre with operational tools to assist experts and decision makers in the event of accidental atmospheric releases and contamination of the terrestrial environment. The on-going project aims to develop tools for the management of marine contamination events in French coastal areas. This should allow us to evaluate and anticipate post-accident conditions, including potential contamination sites, contamination levels and potential consequences. In order to achieve this goal, two complementary tools are developed: site-specific marine data sheets and a dedicated simulation tool (STERNE, Simulation du Transport et du transfert d’Eléments Radioactifs dans l'environNEment marin). Marine data sheets are used to summarize the marine environment characteristics of the various sites considered, and to identify vulnerable areas requiring implementation of population protection measures, such as aquaculture areas, beaches or industrial water intakes, as well as areas of major ecological interest. Local climatological data (dominant sea currents as a function of meteorological or tidal conditions) serving as the basis for an initial environmental sampling strategy is provided whenever possible, along with a list of possible local contacts for operational management purposes. The STERNE simulation tool is designed to predict radionuclide dispersion and contamination in seawater and marine species by incorporating spatio-temporal data. 3D hydrodynamic forecasts are used as input data. Direct discharge points or

Experimentation of nuclear weapons, releases and storages of radioactive wastes in the Kara sea and in New Zemble

International Nuclear Information System (INIS)

Charmasson, S.

1996-01-01

132 nuclear weapons were tested from 1955 to 1990 in New Zemble. From 1959 to 1993, low level liquid radioactive wastes, low and medium level solid radioactive wastes, reactor core and fuel of submarine and nuclear propelled ships were released in the Kara and the Barentz seas. For these two seas, a recapitulation of the different radioactive sources and the found level of radioactivity of the marine environment are presented. (A.B.). 22 refs. 4 figs., 6 tabs

Models and methods to evaluate consequences of the release of airborne radioactivity from NNPs

International Nuclear Information System (INIS)

Anh, T.H.

1989-01-01

To examine the radioactive contamination and possible consequences of a nuclear power plant on living organisms during its operation periodes, the computer programmes were elaborated for assessing its fluences on the environment. The authors have resolved the following problems: i) Calculation of fission product inventories in the reactor core; ii) Calculation of the atmospheric dispersion of the released radionuclides under the meteorological conditions as well as the deposition of the radioactive substances on the soil; iii) Calculation of the irradiation doses

Simulation Studies of Diffusion-Release and Effusive-Flow of Short-Lived Radioactive Isotopes

CERN Document Server

Zhang, Yan; Kawai, Yoko

2005-01-01

Delay times associated with diffusion release from targets and effusive-flow transport of radioactive isotopes to ion sources are principal intensity limiters at ISOL-based radioactive ion beam facilities, and simulation studies with computer models are cost effective methods for designing targets and vapor transport systems with minimum delay times to avoid excessive decay losses of short lived ion species. A finite difference code, Diffuse II, was recently developed at the Oak Ridge National Laboratory to study diffusion-release of short-lived species from three principal target geometries. Simulation results are in close agreement with analytical solutions to Fick’s second equation. Complementary to the development of Diffuse II, the Monte-Carlo code, Effusion, was developed to address issues related to the design of fast vapor transport systems. Results, derived by using Effusion, are also found to closely agree with experimental measurements. In this presentation, the codes will be used in conc...

Simplified analytical model to simulate radionuclide release from radioactive waste trenches

International Nuclear Information System (INIS)

Sa, Bernardete Lemes Vieira de

2001-01-01

In order to evaluate postclosure off-site doses from low-level radioactive waste disposal facilities, a computer code was developed to simulate the radionuclide released from waste form, transport through vadose zone and transport in the saturated zone. This paper describes the methodology used to model these process. The radionuclide released from the waste is calculated using a model based on first order kinetics and the transport through porous media was determined using semi-analytical solution of the mass transport equation, considering the limiting case of unidirectional convective transport with three-dimensional dispersion in an isotropic medium. The results obtained in this work were compared with other codes, showing good agreement. (author)

Coincidence-counting corrections for accidental coincidences, set dead time and intrinsic dead time

International Nuclear Information System (INIS)

Wyllie, H.A.

1998-01-01

An equation is derived for calculating the radioactivity of a source from the results of coincidence counting, taking into account dead-time losses and accidental coincidences. The corrections allow for the extension of the set dead time in the p channel by the intrinsic dead time. Experimental verification shows improvement over a previous equation. (author)

Radioactive release from VVER-1000 reactors after a terror attack

International Nuclear Information System (INIS)

Sdouz, G.

2005-01-01

Full text: One of the terror scenarios for nuclear power plants is a severe damage of the reactor containment caused by a plane crash or a missile. Due to the loss of electric power the cooling of the core is not maintained leading to a core melt accident. Normally in the course of severe accidents an intact containment has the ability to retain a large part of the radioactive inventory. The goal of this work is the investigation of the behavior of the radioactive release from a VVER-1000-type reactor during a severe accident with a large containment leak from the beginning of the accident. The results are compared with the release in a severe accident via a very small leakage due to the untightness of the containment. This work supplements a series of studies investigating the behavior of a VVER-1000-type reactor during severe accidents under different accident management strategies. The focus in this study is on the 'station blackout'-sequence (or TMLB' in the WASH-1400 nomenclature). The calculations were performed using the Source Term Code Package (STCP), hydrogen explosions are not considered. Up to the melt-through of the cavity bottom the thermal-hydraulics phenomena are almost identical to the TMLB'-case with an intact containment from the beginning. The phenomena occur slightly delayed due to the large containment leak. When the core-concrete-interaction begins the resulting gases leave the containment through the large leak and do not cause a pressure increase. The containment pressure remains at ambient pressure. Due to the different behavior and to the different release times of the nuclides the deviations to the scenario with an intact containment show a great variety. From this comparison it can be shown that the intact containment retains the nuclides up to a factor of 6000. (author)

Development of RadRob15, A Robot for Detecting Radioactive Contamination in Nuclear Medicine Departments

Directory of Open Access Journals (Sweden)

Shafe A.

2016-09-01

Full Text Available Accidental or intentional release of radioactive materials into the living or working environment may cause radioactive contamination. In nuclear medicine departments, radioactive contamination is usually due to radionuclides which emit high energy gamma photons and particles. These radionuclides have a broad range of energies and penetration capabilities. Rapid detection of radioactive contamination is very important for efficient removing of the contamination without spreading the radionuclides. A quick scan of the contaminated area helps health physicists locate the contaminated area and assess the level of activity. Studies performed in IR Iran shows that in some nuclear medicine departments, areas with relatively high levels of activity can be found. The highest contamination level was detected in corridors which are usually used by patients. To monitor radioactive contamination in nuclear medicine departments, RadRob15, a contamination detecting robot was developed in the Ionizing and Non-ionizing Radiation Protection Research Center (INIRPRC. The motor vehicle scanner and the gas radiation detector are the main components of this robot. The detection limit of this robot has enabled it to detect low levels of radioactive contamination. Our preliminary tests show that RadRob15 can be easily used in nuclear medicine departments as a device for quick surveys which identifies the presence or absence of radioactive contamination.

Order of 4 august 1989 on licensing the release of gaseous radioactive effluents by the Cattenom nuclear production centre (units 3 and 4)

International Nuclear Information System (INIS)

1989-08-01

This Order fixes the conditions and limits of authorised releases of gaseous radioactive effluents from Units 3 and 4 of the Cattenom nuclear power plant. It specifies these are maximum limits, below which the radioactive releases should be as low as possible [fr

Proposal of the concept of selection of accidents that release large amounts of radioactive substances in the high temperature engineering test reactor

International Nuclear Information System (INIS)

Ono, Masato; Honda, Yuki; Takada, Shoji; Sawa, Kazuhiro

2015-01-01

In Position, construction and equipment of testing and research reactor to be subjected to the use standards for rules Article 53 (prevention of expansion of the accident to release a large amount of radioactive material) generation the frequency is a lower accident than design basis accident, when what is likely to release a large amount of radioactive material or radiation from the facility has occurred, and take the necessary measures in order to prevent the spread of the accident. There is provided a lower accident than frequency design basis accidents, for those that may release a large amount of radioactive material or radiation. (author)

Source term estimation and the isotopic ratio of radioactive material released from the WIPP repository in New Mexico, USA

International Nuclear Information System (INIS)

Thakur, P.

2016-01-01

After almost 15 years of operations, the Waste Isolation Pilot Plant (WIPP) had one of its waste drums breach underground as a result of a runaway chemical reaction in the waste it contained. This incident occurred on February 14, 2014. Moderate levels of radioactivity were released into the underground air. A small portion of the contaminated underground air also escaped to the surface through the ventilation system and was detected approximately 1 km away from the facility. According to the source term estimation, the actual amount of radioactivity released from the WIPP site was less than 1.5 mCi. The highest activity detected on the surface was 115.2 μBq/m 3 for 241 Am and 10.2 μBq/m 3 for 239+240 Pu at a sampling station located 91 m away from the underground air exhaust point and 81.4 μBq/m 3 of 241 Am and 5.8 μBq/m 3 of 239+240 Pu at a monitoring station located approximately 1 km northwest of the WIPP facility. The dominant radionuclides released were americium and plutonium, in a ratio that matches the content of the breached drum. Air monitoring across the WIPP site intensified following the first reports of radiation detection underground to determine the extent of impact to WIPP personnel, the public, and the environment. In this paper, the early stage monitoring data collected by an independent monitoring program conducted by the Carlsbad Environmental Monitoring & Research Center (CEMRC) and an oversight monitoring program conducted by the WIPP's management and operating contractor, the Nuclear Waste Partnership (NWP) LLC were utilized to estimate the actual amount of radioactivity released from the WIPP underground. The Am and Pu isotope ratios were measured and used to support the hypothesis that the release came from one drum identified as having breached that represents a specific waste stream with this radionuclide ratio in its inventory. This failed drum underwent a heat and gas producing reaction that overpowered its vent and

Impact on the marine environment of radioactive releases resulting from the Fukushima-Daiichi nuclear accident. April 4, 2011

International Nuclear Information System (INIS)

2011-01-01

After having outlined that measurements taken over several days in the sea water in the vicinity of the power station have revealed severe contamination of the marine environment by various radionuclides released as a result of the accident at the Fukushima-Daiichi nuclear power station, this report describes the origins of the contamination of the marine environment (release of liquid effluents directly into the sea in the vicinity of the damaged reactors, atmospheric fallout onto the surface of the sea, conveyance of radioactive pollution by rainout of contaminated ground). Then, while proposing several maps, the authors analyse and comment the dispersion in the sea of radioactive pollutants by addressing the following issues: topography of the sea bed and sea currents off the Japanese coast, immediate or short term dispersion (a few days), mid-term dispersion (weeks and months), long term and large scale future of the radioactive pollutants. Finally, the report briefly discusses the impact of radioactive pollution on living species

Transfer of accidentally released radionuclides in agricultural systems (TARRAS)

International Nuclear Information System (INIS)

Cancio, D.; Maubert, Colle; Rauret, G.; Grandison, A.S.

1993-01-01

The aim of this project is to contribute to the reliability of radiological assessment methods and establish a scientific base for the design of post-accident countermeasures. Three main aspects are considered in this project: A simulated accidental source term is used and the behaviour of aerosol deposits containing Sr, Cs and Ag isotopes are followed in some European soil-crop systems; the modification of radionuclide transfer rates through the food chain by well established food processing techniques is studied for Sr, Cs, Co and Ru; the project includes a study on the specific mediterranean diet and transfer data that are compared with currently used generic parameters. Seven contributions of the project for the reporting period are presented. (R.P.) 11 figs., 12 tabs

An update on radioactive release and exposures after the Fukushima Dai-ichi nuclear disaster.

LENUS (Irish Health Repository)

McLaughlin, P D

2012-09-01

On 11 March 2011, the Richter scale 0.9-magnitude Tokohu earthquake and tsunami struck the northeast coast of Japan, resulting in widespread injury and loss of life. Compounding this tragic loss of life, a series of equipment and structural failures at the Fukushima Dai-ichi nuclear power plant (FDNP) resulted in the release of many volatile radioisotopes into the atmosphere. In this update, we detail currently available evidence about the nature of immediate radioactive exposure to FDNP workers and the general population. We contrast the nature of the radioactive exposure at FDNP with that which occurred at the Chernobyl power plant 25 years previously. Prediction of the exact health effects related to the FDNP release is difficult at present and this disaster provides the scientific community with a challenge to help those involved and to continue research that will improve our understanding of the potential complications of radionuclide fallout.

Visits to Australia by nuclear powered or armed vessels: contingency planning for the accidental release of ionizing radiation

International Nuclear Information System (INIS)

1989-01-01

The report refers to the adequacy of current contingency planning by the Australian Federal and Senate authorities to deal with the accidental release of ionizating radiation from visiting nuclear powered or armed vessels in Australian waters and ports. Much of the material was obtained in response to questions put in writing by the Senate Standing Committee to the Department of Defence, ANSTO and others. In addition, the report contains relevant information from Commonwealth documents as well as the Committee findings and recommendations. Issues considered include: types of visiting nuclear powered vessels, accident likelihood and consequences, differences between naval and land-based reactors, safety records. The persons or organizations who made submissions or appeared in all public hearings are listed in the appendixes, along with all visits to Australian ports by nuclear powered warships from 1976 to 1988

Game theory of pre-emptive vaccination before bioterrorism or accidental release of smallpox.

Science.gov (United States)

Molina, Chai; Earn, David J D

2015-06-06

Smallpox was eradicated in the 1970s, but new outbreaks could be seeded by bioterrorism or accidental release. Substantial vaccine-induced morbidity and mortality make pre-emptive mass vaccination controversial, and if vaccination is voluntary, then there is a conflict between self- and group interests. This conflict can be framed as a tragedy of the commons, in which herd immunity plays the role of the commons, and free-riding (i.e. not vaccinating pre-emptively) is analogous to exploiting the commons. This game has been analysed previously for a particular post-outbreak vaccination scenario. We consider several post-outbreak vaccination scenarios and compare the expected increase in mortality that results from voluntary versus imposed vaccination. Below a threshold level of post-outbreak vaccination effort, expected mortality is independent of the level of response effort. A lag between an outbreak starting and a response being initiated increases the post-outbreak vaccination effort necessary to reduce mortality. For some post-outbreak vaccination scenarios, even modest response lags make it impractical to reduce mortality by increasing post-outbreak vaccination effort. In such situations, if decreasing the response lag is impossible, the only practical way to reduce mortality is to make the vaccine safer (greater post-outbreak vaccination effort leads only to fewer people vaccinating pre-emptively). © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Analyses with ASTEC related to release of FPs and aerosol transport in case of SBLOCA For WWER 1000

International Nuclear Information System (INIS)

Atanasova, B.; Stefanova, A.; Groudev, P.

2008-01-01

The objective of this paper is to present the results obtained from performing the calculations with ASTEC computer code for the Source Term evaluation for specific severe accident transient. The calculations have been performed with the new version of ASTEC. The ASTEC 1.3 R2 code version is released by the French IRSN (Institut de Radioprotection at de surete nucleaire) by the end of 2007. The sequences include the release of fission products into the reactor containment and environment and transport of fission products. The analyses proposed here are performed to simulate radioactive products release through the cold leg of SG under accidental conditions. This investigation has been performed in the framework of the SARNET project (under the EURATOM 6th framework program) by the FoBAUs group (Forum of Bulgarian ASTEC users). (authors)

Release mitigation spray safety systems for chemical demilitarization applications.

Energy Technology Data Exchange (ETDEWEB)

Leonard, Jonathan; Tezak, Matthew Stephen; Brockmann, John E.; Servantes, Brandon; Sanchez, Andres L.; Tucker, Mark David; Allen, Ashley N.; Wilson, Mollye C.; Lucero, Daniel A.; Betty, Rita G.

2010-06-01

Sandia National Laboratories has conducted proof-of-concept experiments demonstrating effective knockdown and neutralization of aerosolized CBW simulants using charged DF-200 decontaminant sprays. DF-200 is an aqueous decontaminant, developed by Sandia National Laboratories, and procured and fielded by the US Military. Of significance is the potential application of this fundamental technology to numerous applications including mitigation and neutralization of releases arising during chemical demilitarization operations. A release mitigation spray safety system will remove airborne contaminants from an accidental release during operations, to protect personnel and limit contamination. Sandia National Laboratories recently (November, 2008) secured funding from the US Army's Program Manager for Non-Stockpile Chemical Materials Agency (PMNSCMA) to investigate use of mitigation spray systems for chemical demilitarization applications. For non-stockpile processes, mitigation spray systems co-located with the current Explosive Destruction System (EDS) will provide security both as an operational protective measure and in the event of an accidental release. Additionally, 'tented' mitigation spray systems for native or foreign remediation and recovery operations will contain accidental releases arising from removal of underground, unstable CBW munitions. A mitigation spray system for highly controlled stockpile operations will provide defense from accidental spills or leaks during routine procedures.

A Nuclide Release Model for a Deep Well Scenario near a Repository

International Nuclear Information System (INIS)

Lee, Youn Myoung; Jung, Jong Tae; Choi, Jong Won

2010-01-01

Recently several template programs ready for the safety assessment of a high-level radioactive waste repository (HLW) and a low- and intermediate level radioactive waste repository (LILW) systems, that are conceptually modeled, have been developed by utilizing GoldSim and AMBER at KAERI. During the last few years, such template programs have been utilized for the evaluation of nuclide transports in the nearand far-field of a repository as well as transport through the biosphere under various normal and disruptive release scenarios with assumed data. The GoldSim program, another template program by which influence due to a well located very near to the repository has been modeled and evaluated for an assumed case in order to simulate the worst exposure scenario. This seems very useful to evaluate an accidental event a long time after closure of the repository has been developed and illustrated

Regulatory review of releases from HIFAR of radioactive airborne effluent

International Nuclear Information System (INIS)

Westall, D.J.; Macnab, D.I.

1996-01-01

Full text: The Nuclear Safety Bureau (NSB) was set up by legislation in 1992 as an independent Commonwealth corporate body reporting to the Minister for Health and Family Services. Its functions include monitoring and reviewing the safety of nuclear plant owned or operated by the Australian Nuclear Science and Technology Organisation (ANSTO). The NSB sets requirements for authorisation of the operation of the HIFAR research reactor, and may impose restrictions and conditions on its operation. The authorisation for the operation of HIFAR includes a requirement for arrangements for the treatment, safe storage and disposal of solid, liquid and gaseous radioactive wastes from the reactor. The objective is to establish conditions which would ensure that radiation exposure to plant personnel and the public from radioactive wastes are within acceptable limits and that releases are maintained as low as reasonably achievable. The NSB has developed expectations based on international best practice, against which to review HIFAR's arrangements for satisfying the requirement and achieving the objective. Arrangements for the release of airborne radioactive effluent from HIFAR were reviewed by the NSB as part of an overall review of the upgrade of safety documentation for HIFAR. The NSB's expectations for the review were drawn from the International Atomic Energy Agency (IAEA) Basic Safety Standards (Safety Series No 115-I) and the National Health and Medical Research Council (NHMRC) Recommendations for Limiting Exposure to Ionizing Radiation (1995). These expectations included a hierarchy of primary dose limits, stack discharge limits and reference levels for HIFAR aimed at ensuring that radiation doses to the public due to airborne effluent are less than the national dose limits and ANSTO's dose constraints, and are as low as reasonably achievable. An approach favoured by the operator is to work directly to a primary dose limit using an airborne dispersion computer program to

Comparison of the accident process, radioactivity release and ground contamination between Chernobyl and Fukushima-1

International Nuclear Information System (INIS)

Imanaka, Tetsuji; Hayashi, Gohei; Endo, Satoru

2015-01-01

In this report, we have reviewed the basic features of the accident processes and radioactivity releases that occurred in the Chernobyl accident (1986) and in the Fukushima-1 accident (2011). The Chernobyl accident was a power-surge accident that was caused by a failure of control of a fission chain reaction, which instantaneously destroyed the reactor and building, whereas the Fukushima-1 accident was a loss-of-coolant accident in which the reactor cores of three units were melted by decay heat after losing the electricity supply. Although the quantity of radioactive noble gases released from Fukushima-1 exceeded the amount released from Chernobyl, the size of land area severely contaminated by 137 Cesium ( 137 Cs) was 10 times smaller around Fukushima-1 compared with around Chernobyl. The differences in the accident process are reflected in the composition of the discharged radioactivity as well as in the composition of the ground contamination. Volatile radionuclides (such as 132 Te- 132 I, 131 I, 134 Cs and 137 Cs) contributed to the gamma-ray exposure from the ground contamination around Fukishima-1, whereas a greater variety of radionuclides contributed significantly around Chernobyl. When radioactivity deposition occurred, the radiation exposure rate near Chernobyl is estimated to have been 770 μGy h −1 per initial 137 Cs deposition of 1000 kBq m −2 , whereas it was 100 μGy h −1 around Fukushima-1. Estimates of the cumulative exposure for 30 years are 970 and 570 mGy per initial deposition of 1000 kBq m −2 for Chernobyl and Fukusima-1, respectively. Of these exposures, 49 and 98% were contributed by radiocesiums ( 134 Cs + 137 Cs) around Chernobyl and Fukushima-1, respectively

The Adoption of Urgent Measures to Protect the Population in the Event of an Accidental Release of Radioactivity into the Environment; 041f 0420 0414

Energy Technology Data Exchange (ETDEWEB)

Dikobes, I. K.; Il' In, L. A.; Kozlov, V. M.; Moiseev, A. A. [Ministerstvo Zdravoohranenija SSSR, Moskva, SSSR (Russian Federation); Konstantinov, Ju. O.; Tarasov, S. I.; Shamov, V. P. [Nauchno-Issledovatel' skij Institut Radiacionnoj Gigieny Ministerstva Zdravoohranenija RSFSR, Leningrad, SSSR (Russian Federation)

1969-10-15

The authors consider a situation in which there is a risk of the population being seriously exposed to radiation through the accidental entry of radioactive material into the environment. The specific features of the situation under consideration are such that the appropriate protective measures can only be effective if implemented in time, i.e. within the first few hours or days of the emergency. Hence a programme providing for protection of the population against radiation in an emergency should include (a) methods by which the dosimetric information required for a rapid evaluation of the potential radiation hazard can be promptly obtained, and (b) criteria for the . adoption of urgent measures, i.e., the levels of radioactive contamination or irradiation justifying or not justifying the need for the implementation of specific protective measures. The authors make recommendations (draft regulations) on which to base such decisions. The criterion for the decisions is based on two hazard levels (A and B) for each of the irradiation paths, potentially significant in the given situation: external and contact irradiation, inhalation, and contamination of foodstuffs. Decisions to adopt immediate protective measures should be based on a comparison between the evaluated (predicted) hazard levels and the critical levels, defined as those hazard levels at which implementation of the protective measures under consideration is (A) desirable or (B) obligatory, irrespective of the specific circumstances. Figures for the critical levels are chosen with regard to the specific nature of the situation and protective measures, maximum permissible levels for occupational exposure, and known information on the biological risk of certain exposure levels. (author) [Russian] Rassmatrivaetsja takaja situacija, kogda v rezul'tate avarijnogo postuplenija radioaktivnyh veshhestv vo vneshnjuju sredu sozdaetsja opasnost' sushhestvennogo obluchenija naselenija. Specifika rassmatrivaemoj

Radioactive decay data tables: A handbook of decay data for application to radiation dosimetry and radiological assessments

Science.gov (United States)

Kocher, D. C.; Smith, J. S.

Decay data are presented for approximately 500 radionuclides including those occurring naturally in the environment, those of potential importance in routine or accidental releases from the nuclear fuel cycle, those of current interest in nuclear medicine and fusion reactor technology, and some of those of interest to Committee 2 of the International Commission on Radiological Protection for the estimation of annual limits on intake via inhalation and ingestion for occupationally exposed individuals. Physical processes involved in radioactive decay which produce the different types of radiation observed, methods used to prepare the decay data sets for each radionuclide in the format of the computerized evaluated nuclear structure data file, the tables of radioactive decay data, and the computer code MEDLIST used to produce the tables are described. Applications of the data to problems of interest in radiation dosimetry and radiological assessments are considered as well as the calculations of the activity of a daughter radionuclide relative to the activity of its parent in a radioactive decay chain.

Fate of gaseous tritium and carbon-14 released from buried low-level radioactive waste

International Nuclear Information System (INIS)

Striegl, R.G.

1988-01-01

Microbial decomposition, chemical degradation, and volatilization of buried low-level radioactive waste results in the release of gases containing tritium ( 3 H) and carbon-14 ( 14 C) to the surrounding environment. Water vapor, carbon dioxide, and methane that contain 3 H or 14 C are primary products of microbial decomposition of the waste. Depending on the composition of the waste source, chemical degradation and volatilization of waste also may result in the production of a variety of radioactive gases and organic vapors. Movement of the gases in materials that surround waste trenches is affected by physical, geochemical, and biological mechanisms including sorption, gas-water-mineral reactions, isotopic dilution, microbial consumption, and bioaccumulation. These mechanisms either may transfer 3 H and 14 C to solids and infiltrating water or may result in the accumulation of the radionuclides in plant or animal tissue. Gaseous 3 H or 14 C that is not transferred to other forms is ultimately released to the atmosphere

Assessment of Cesium, Iodine, Strontium and Ruthenium isotopes behaviour in urban areas, after contamination from accidental release

International Nuclear Information System (INIS)

Vetere, Maria Ines de Carvalho

2002-01-01

The exposures of urban populations to the radiation derived from the deposition, after accidental atmospheric releases, of 137 Cs, 134 Cs, 129 I, 131 I, 133 I, 89 Sr, 103 Ru and 106 Ru were assessed, using the integrated system for the evaluation of environmental radiological impact in emergency situations, developed by the Instituto de Radioprotecao e Dosimetria (IRD)/Comissao Nacional de Energia Nuclear (CNEN). These radionuclide are fission products likely to be emitted in the occurrence of severe nuclear reactor accidents. Their environmental behaviour in urban areas, due to their deposition in soil, in urban surfaces and in vegetable-garden food products, such as leafy and non-leafy vegetables, were analyzed, and dose assessments at the short, medium and long terms were performed, with an without the application of protective measures for reduction of doses. Simulations of unitary initial deposition for each radionuclide and of two different potential accidents involving water reactors (PWR), with different source terms and distinct deposition for each radionuclide, were performed. Results were analyzed on the basis of relative relevance of radionuclides and pathways for the exposure of members of the public, as a function of age and time after the release. It was also performed an assessment of the effectiveness of protective measures as a function of the moment of their implementation. (author)

On - Site Assessment Methods For Environmental Radioactivity

International Nuclear Information System (INIS)

Petrinec, B.; Babic, D.; Bituh, T.

2015-01-01

A method for the rapid determination of radioactivity in cases of release into the environment as well as in cases of nuclear/radiological accidents is described. These measurements would enable a direct risk assessment for humans and biota, without any sampling and at a considerably larger number of locations than in previous studies. Thus obtained, the substantially expanded dataset is expected to shed more light on the properties of environmental radioactivity both in the region studied and in other similar areas. Field measurements will be performed and samples of soil and biota will be collected in order to compare field results with laboratory measurements. Once the method has been validated, previously unexplored locations will be included in the study. Our measurements at numerous locations will also provide control values for comparison in cases of any unplanned or accidental radiological event. An assessment of the possible effects of radionuclide concentrations on the human food chain and biota will be performed within the appropriate models used worldwide exactly for this purpose. In this way, the project should contribute to regional, European, and global efforts towards understanding the radiological impact on ecosystems. Field measurements will also address certain issues in the environmental metrology of radioactive substances, e.g., simultaneous determination of activity concentrations and related dose rates. This will serve as a tool for rapid risk assessment in emergency situations. (author).

Problems concerning food production, supply and use caused by radioactive deposition: A study directed towards needs for early decision making after radioactive fallout; Radiakproblem inom livsmedelssektorn: En studie inriktad paa behoven foer beslutsfattande i tidigt skede efter radioaktivt nedfall

Energy Technology Data Exchange (ETDEWEB)

Bergman, R

1995-12-01

The primary aim of this study is to analyze and describe how a radioactive deposition after nuclear weapons employment outside Sweden would affect the domestic food production in a short time perspective and in the sequence of events from primary production over processing and transport to food consumption. The study is an attempt at a comprehensive treatment of knowledge needed as a basis for decisions on operative issues, often of a time-urgent nature. Actions to alleviate the problems pertinent to the food supply in the event of radioactive fallout are also discussed, although without any claim of exhaustive coverage. Other aspects, as the economical consequences of the disturbances due to the fallout situation (or of possible counteractions) are not dealt with, however. With certain restrictions mentioned in the text the results are also applicable in connection with radioactive deposition caused by accidental release from a nuclear power plant. 60 refs, 32 figs.

Models selected for calculation of doses, health effects and economic costs due to accidental radionuclide releases from nuclear power plants. Technical report

International Nuclear Information System (INIS)

Strenge, D.L.; Acharya, S.; Baker, D.A.; Droppo, J.G.; McPherson, R.B.

1980-05-01

Models are described for use in site-specific environmental consequence analysis of nuclear reactor accidents of Classes 3 through 9. The models presented relate radioactivity released to resulting doses, health effects, and costs of remedial actions. Specific models are presented for the major exposure pathways of airborne releases, waterborne releases and direct irradiation from activity within the facility buildings, such as the containment. Time-dependent atmospheric dispersion parameters, crop production parameters, and other variable parameters are used in the models. The environmental effects are analyzed for several accident start times during the year. Several remedial actions are considered

Accumulation of radioactive cesium released from Fukushima Daiichi Nuclear Power Plant in terrestrial cyanobacteria Nostoc commune.

Science.gov (United States)

Sasaki, Hideaki; Shirato, Susumu; Tahara, Tomoya; Sato, Kenji; Takenaka, Hiroyuki

2013-01-01

The Fukushima Daiichi Nuclear Power Plant accident released large amounts of radioactive substances into the environment and contaminated the soil of Tohoku and Kanto districts in Japan. Removal of radioactive material from the environment is an urgent problem, and soil purification using plants is being considered. In this study, we investigated the ability of 12 seed plant species and a cyanobacterium to accumulate radioactive material. The plants did not accumulate radioactive material at high levels, but high accumulation was observed in the terrestrial cyanobacterium Nostoc commune. In Nihonmatsu City, Fukushima Prefecture, N. commune accumulated 415,000 Bq/kg dry weight (134)Cs and 607,000 Bq kg(-1) dry weight (137)Cs. The concentration of cesium in N. commune tended to be high in areas where soil radioactivity was high. A cultivation experiment confirmed that N. commune absorbed radioactive cesium from polluted soil. These data demonstrated that radiological absorption using N. commune might be suitable for decontaminating polluted soil.

Release of the radioactive patient following radiation therapy

International Nuclear Information System (INIS)

Powers, J.; Cancer Board, A.

2004-01-01

Patients walk out of medical facilities containing as much as a complete therapeutic dose of radiation on a daily basis. This presents a significant challenge to the radiation protection community, as most patients have no prior education related to radiation and may not have the aptitude to assimilate such knowledge. In the case of targeted radiation therapy in which radionuclides are used to selectively target the cancer, patients are typically released only after adequate elimination and decay of the radionuclide administered. Established modalities of targeted radiotherapy include the use of iodine for thyroid cancer, strontium for bone pain, phosphorous for haematological diseases, 131I-mIBG for neuroblastoma, and most recently Y-90 labelled monoclonal antibodies for lymphoma. In the case of permanent implants, implants of encapsulated radioactive sources are left permanently in the tissues, thus patients are released containing their complete therapeutic dose. Isotopes used in permanent implants include I-125, Pd-103 and Au-198. Radiation safety considerations for both cases, the release of a patient who has received targeted radiotherapy, and the release of a patient who has received a permanent implant, will be discussed. A summary of applicable regulations will serve as a starting point for each of the following considerations; i) Security and source control ii) Instructions to patient and family members iii) Risk to the public As the incidence of cancer increases, and the popularity of targeted radiotherapy and permanent seed implants grows, the event of having an untrained person in possession of a therapeutic dose of radiation becomes more and more common. It is essential to stop and examine the risk of this practice, whether current strategies to reduce the risk to an acceptable level are indeed effective, and whether control over these sources is even feasible. (Author)

Release of the radioactive patient following radiation therapy

Energy Technology Data Exchange (ETDEWEB)

Powers, J.; Cancer Board, A.

2004-07-01

Patients walk out of medical facilities containing as much as a complete therapeutic dose of radiation on a daily basis. This presents a significant challenge to the radiation protection community, as most patients have no prior education related to radiation and may not have the aptitude to assimilate such knowledge. In the case of targeted radiation therapy in which radionuclides are used to selectively target the cancer, patients are typically released only after adequate elimination and decay of the radionuclide administered. Established modalities of targeted radiotherapy include the use of iodine for thyroid cancer, strontium for bone pain, phosphorous for haematological diseases, 131I-mIBG for neuroblastoma, and most recently Y-90 labelled monoclonal antibodies for lymphoma. In the case of permanent implants, implants of encapsulated radioactive sources are left permanently in the tissues, thus patients are released containing their complete therapeutic dose. Isotopes used in permanent implants include I-125, Pd-103 and Au-198. Radiation safety considerations for both cases, the release of a patient who has received targeted radiotherapy, and the release of a patient who has received a permanent implant, will be discussed. A summary of applicable regulations will serve as a starting point for each of the following considerations; i) Security and source control ii) Instructions to patient and family members iii) Risk to the public As the incidence of cancer increases, and the popularity of targeted radiotherapy and permanent seed implants grows, the event of having an untrained person in possession of a therapeutic dose of radiation becomes more and more common. It is essential to stop and examine the risk of this practice, whether current strategies to reduce the risk to an acceptable level are indeed effective, and whether control over these sources is even feasible. (Author)

Development of DOE complexwide authorized release protocols for radioactive scrap metals

International Nuclear Information System (INIS)

Chen, S. Y.

1998-01-01

Within the next few decades, several hundred thousand tons of metal are expected to be removed from nuclear facilities across the U.S. Department of Energy (DOE) complex as a result of decontamination and decommissioning (D and D) activities. These materials, together with large quantities of tools, equipment, and other items that are commonly recovered from site cleanup or D and D activities, constitute non-real properties that warrant consideration for reuse or recycle, as permitted and practiced under the current DOE policy. The provisions for supporting this policy are contained in the Draft Handbook for Controlling Release for Reuse or Recycle of Property Containing Residual Radioactive Material published by DOE in 1997 and distributed to DOE field offices for interim use and implementation. The authorized release of such property is intended to permit its beneficial use across the entire DOE complex. The objective of this study is to develop readily usable computer-based release protocols to facilitate implementation of the Handbook in evaluating the scrap metals for reuse and recycle. The protocols provide DOE with an effective oversight tool for managing release activities

Insect wings as retrospective/accidental/forensic dosimeters: An optically stimulated luminescence investigation

International Nuclear Information System (INIS)

Kazakis, Nikolaos A.; Tsetine, Anastasia Th.; Kitis, George; Tsirliganis, Nestor C.

2016-01-01

Estimation of the radiation released during nuclear accidents or radiological terrorist events is imperative for the prediction of health effects following such an exposure. In addition, in several cases there is a need to identify the prior presence of radioactive materials at buildings or sites (nuclear forensics). To this direction, several materials have been the research object of numerous studies the last decade in an attempt to identify potentially new retrospective/accidental/forensic dosimeters. However, the studies targeting biological materials are limited and their majority is mainly focused on the luminescence behavior of human biological material. Consequently, the use of such materials in retrospective dosimetry presumes the exposure of humans in the radiation field. The present work constitutes the first attempt to seek non-human biological materials, which can be found in nature in abundance or in/on other living organisms. To this end, the present work investigates the basic optically stimulated luminescence behavior of insect wings, which exhibit several advantages compared to other materials. Insects are ubiquitous, have a short life expectancy and exhibit a low decomposition rate after their death. Findings of the present study are encouraging towards the potential use of insects' wings at retrospective/accidental/forensic dosimetry, since they exhibit linear OSL response over a wide dose range and imperceptible loss of signal several days after their irradiation when they are kept in dark. On the other hand, the calculated lower detection limit is not low enough to allow their use as emergency dosimeters when individuals are exposed to non-lethal doses. In addition, wings exhibit strong optical fading when they are exposed to daylight and thus special care should be taken during the sampling procedure in order to use the wings as accidental/forensic dosimeters, by seeking (dead) insects in dark places, such as behind furniture, equipment or in

Probabilistic siting analysis of nuclear power plants emphasizing atmospheric dispersion of radioactive releases and radiation-induced health effects

International Nuclear Information System (INIS)

Savolainen, Ilkka

1980-01-01

A presentation is made of probabilistic evaluation schemes for nuclear power plant siting. Effects on health attributable to ionizing radiation are reviewed, for the purpose of assessment of the numbers of the most important health effect cases in light-water reactor accidents. The atmospheric dispersion of radioactive releases from nuclear power plants is discussed, and there is presented an environmental consequence assessment model in which the radioactive releases and atmospheric dispersion of the releases are treated by the application of probabilistic methods. In the model, the environmental effects arising from exposure to radiation are expressed as cumulative probability distributions and expectation values. The probabilistic environmental consequence assessment model has been applied to nuclear power plant site evaluation, including risk-benefit and cost-benefit analyses, and the comparison of various alternative sites. (author)

Malicious release of radioactive materials in urban area. Exposure of the public and emergency staff, protective measures

International Nuclear Information System (INIS)

Koch, Wolfgang; Lange, Florentin

2016-01-01

The preparedness for hypothetical radiological scenarios is part of the tasks for governmental authorities, safety and emergency organizations and the staff in case of the incident. The EURATOM guideline for radiation protection has to be implemented into national laws. According to the guidelines it is required that emergency planning has to be prepared for hypothetical radiological scenarios including terroristic or other maliciously motivated attacks using radioactive materials. The study includes assumptions on the released respirable radioactivity, restriction of the hazardous area, wind induced re-suspension of radioactive dusts and inhalation exposure, and mitigation measures.

Radioactivity and foods

International Nuclear Information System (INIS)

Olszyna-Marzys, A.E.

1991-01-01

The purpose of this article is to describe and contrast two relationships between radiation and food on the one hand, beneficial preservation of food by controlled exposure to ionizing radiation; and, on the other, contamination of food by accidental incorporation of radioactive nuclides within the food itself. In food irradiation, electrons or electromagnetic radiation is used to destroy microorganisms and insects or prevent seed germination. The economic advantages and health benefits of sterilizing food in this manner are clear, and numerous studies have confirmed that under strictly controlled conditions no undesirable changes or induced radioactivity is produced in the irradiated food. An altogether different situation is presented by exposure of food animals and farming areas to radioactive materials, as occurred after the major Soviet nuclear reactor accident at Chernobyl. This article furnishes the basic information needed to understand the nature of food contamination associated with that event and describes the work of international organizations seeking to establish appropriate safe limits for levels of radioactivity in foods

Risk assessment, risk management and risk-based monitoring following a reported accidental release of poliovirus in Belgium, September to November 2014.

Science.gov (United States)

Duizer, Erwin; Rutjes, Saskia; de Roda Husman, Ana Maria; Schijven, Jack

2016-01-01

On 6 September 2014, the accidental release of 10(13) infectious wild poliovirus type 3 (WPV3) particles by a vaccine production plant in Belgium was reported. WPV3 was released into the sewage system and discharged directly to a wastewater treatment plant (WWTP) and subsequently into rivers that flowed to the Western Scheldt and the North Sea. No poliovirus was detected in samples from the WWTP, surface waters, mussels or sewage from the Netherlands. Quantitative microbial risk assessment (QMRA) showed that the infection risks resulting from swimming in Belgium waters were above 50% for several days and that the infection risk by consuming shellfish harvested in the eastern part of the Western Scheldt warranted a shellfish cooking advice. We conclude that the reported release of WPV3 has neither resulted in detectable levels of poliovirus in any of the samples nor in poliovirus circulation in the Netherlands. This QMRA showed that relevant data on water flows were not readily available and that prior assumptions on dilution factors were overestimated. A QMRA should have been performed by all vaccine production facilities before starting up large-scale culture of WPV to be able to implement effective interventions when an accident happens.

The hazard to man of accidental releases of tritium

International Nuclear Information System (INIS)

Brearley, I.R.

1985-03-01

Some aspects of the atmospheric dispersion of tritium are discussed, followed by consideration of the dosimetric pathways. In order to assess the significance of a tritium release the doses from various pathways are estimated and compared with the doses estimated from a similar release of iodine-131. The major hazard from tritium is the ingestion of contaminated food products. For similar releases of tritium and I 131 the ingestion hazard can be comparable if the release occurs near and before the end of the harvest season. However, in the tritium release case the agricultural season influences the consequences markedly and, at other times during the year, the ingestion hazard from tritium may be approximately 20 times less. The dose from inhalation of tritium is sensitive to its chemical form and for similar releases of tritiated water and tritium gas then the dose from tritiated water is approximately 10 4 greater than the dose from tritium gas. For similar releases of tritiated water and iodine-131 then a comparison of the inhalation shows that the dose from the iodine is approximately 300 times greater. (author)

Results for SEAFP-subtask A 10: Assessments of individual and collective doses to the public for routine and accidental releases of tritium and activation products

International Nuclear Information System (INIS)

Raskob, W.

1995-04-01

Dose calculations have been performed for accidental releases of tritium and activation products. Unit releases of 1 GBq per nuclide have been investigated for 31 fusion relevant nuclides. Additionally, unit releases of 1g of tritium and several activated materials have been studied. Under normal operation conditions, dose calculations have been performed for real source terms of tritium and activated materials. The individual dose values at the fence of the site (1 km) as well as the collective dose to the public (from 1 km to 100 km) have been obtained. As site specific parameters are still missing, different so called ''worst case'' release conditions have been applied. To have a first guess of the influence of the release duration on the dose to the Most Exposed Individual (MEI) in the vicinity of a reactor, different release durations, ranging from 1 hour up to 168 hours have been investigated, too. Finally, dose calculations have been performed for mobilisation source terms which take account of deposition and retention in the plant. This has been done for several RPM and APM source terms. The dose values of these final source terms seem to be less than every criteria to start emergency actions, however, some problems e.g. the behaviour of tritium in the plant, remain unsolved. (orig.)

Study about the integrated treatment of chemical and radioactive effluents, introducing the zero release concept

International Nuclear Information System (INIS)

Mierzwa, Jose Carlos

1996-01-01

An Integrated System to the treatment of Chemical and Radioactive Effluents to the Centro Experimental Aramar is proposed and evaluated, introducing the Effluent Zero Release concept, where factors related to the environmental regulation in vigor in the country, as well as the availability of hydrological resources in the place where CEA have been implanted, are considered. Through a literature analysis of the main effluents treatment techniques available nowadays and after a case of study selection, take into account two industrial installations that will be implanted at CEA, it was defined an arrangement to compose the Integrated System to the Treatment of Chemicals and Radioactive Effluents, focusing the Zero Release concept consolidation. A defined arrangement uses a combination among three treatment processes, it means chemical precipitation, reverse osmosis and evaporation, that were experimentally evaluated. The proposed arrangement was evaluated using synthetic effluents, that were prepared based on data from literature and conception documents of the installation considered in this work. Three kinds of effluents were simulated, one arising from a nuclear reactor laundry, one arising from the water refrigeration system and demineralized water production to the nuclear reactor and the other one arising from a nuclear material production laboratory. Each effluent were individually submitted to the selected treatment processes, to get the best operational conditions for each treatment process. The results got during the laboratory assays show that the proposed Integrated System to the Treatment of Chemicals and Radioactive Effluents is feasible, consolidating the Effluent Zero Release concept, which is the proposition of this work. (author)

Fallout: The experiences of a medical team in the care of a Marshallese population accidentally exposed to fallout radiation

Energy Technology Data Exchange (ETDEWEB)

Conard, R.A.

1991-12-31

This report presents an historical account of the experiences of the Brookhaven Medical team in the examination and treatment of the Marshallese people following their accidental exposure to radioactive fallout in 1954. This is the first time that a population has been heavily exposed to radioactive fallout, and even though this was a tragic mishap, the medical findings have provided valuable information for other accidents involving fallout such as the recent reactor accident at Chernobyl. Particularly important has been the unexpected importance of radioactive iodine in the fallout in producing thyroid abnormalities.

Fallout: The experiences of a medical team in the care of a Marshallese population accidentally exposed to fallout radiation

Energy Technology Data Exchange (ETDEWEB)

Conard, R.A.

1991-01-01

This report presents an historical account of the experiences of the Brookhaven Medical team in the examination and treatment of the Marshallese people following their accidental exposure to radioactive fallout in 1954. This is the first time that a population has been heavily exposed to radioactive fallout, and even though this was a tragic mishap, the medical findings have provided valuable information for other accidents involving fallout such as the recent reactor accident at Chernobyl. Particularly important has been the unexpected importance of radioactive iodine in the fallout in producing thyroid abnormalities.

Fallout: The experiences of a medical team in the care of a Marshallese population accidentally exposed to fallout radiation

International Nuclear Information System (INIS)

Conard, R.A.

1991-01-01

This report presents an historical account of the experiences of the Brookhaven Medical team in the examination and treatment of the Marshallese people following their accidental exposure to radioactive fallout in 1954. This is the first time that a population has been heavily exposed to radioactive fallout, and even though this was a tragic mishap, the medical findings have provided valuable information for other accidents involving fallout such as the recent reactor accident at Chernobyl. Particularly important has been the unexpected importance of radioactive iodine in the fallout in producing thyroid abnormalities

Accidental release of iodine 131 by the IRE of the Fleurus site: return on experience by the Belgian safety authority

International Nuclear Information System (INIS)

Vandecasteele, C.M.; Sonck, M.; Degueldre, D.

2010-01-01

After a presentation of the activities of the IRE, the Belgian National Institute of Radio-elements, i.e. the production of radionuclides used in nuclear medicine, this report describes the process and chemical reaction which caused an accidental release of iodine 131. It analyzes the causes of this incident, and how the incident has been managed by the Belgian safety authority. It discusses the first assessment of radiological consequences, describes how the incident has been managed at the federal level, and how population and media have been informed. It discusses the actual radiological consequences through measurements performed on grass and vegetables (graphs and maps indicate contamination levels and contaminated areas), and through the assessment of exposure of adults and children by different ways. Lessons learned are then discussed

Intercomparison of numerical simulations on oceanic dispersion of the radioactive cesium released because of the Fukushima disaster

Energy Technology Data Exchange (ETDEWEB)

Kawamura, H.; Kobayshi, T.; Furuno, A. [Japan Atomic Energy Agency, Ibaraki (Japan); Usui, N.; Kamachi, M. [Japan Meteorological Agency, Meteorological Research Inst., Ibaraki (Japan); Nishikawa, S.; Ishikawa, Y. [Japan Agency for Marine-Earth Science and Tech., Kanagawa (Japan)

2014-07-01

We conducted numerical simulations on oceanic dispersion of the radioactive cesium released because of the Fukushima disaster in the North Pacific. Two independent oceanic reanalysis data were used in the simulations. Both simulations suggested that the {sup 137}Cs concentration had been reduced to the pre-Fukushima level around 2.5 years after the disaster. The intercomparison revealed that meso-scale eddies accompanied by the Kuroshio Extension may have efficiently diluted the radioactive cesium at the sea surface. The meso-scale eddies also played an important role in transporting the surface radioactive cesium into the intermediate layer. (author)

Interpretation of the concepts of ALARA and bat for radioactive effluent releases from nuclear installation

International Nuclear Information System (INIS)

Chen Xiaoqiu

2009-01-01

Based on the understanding of the important concepts of both ALARA and BAT associated with the characteristics of effluent releases from the existing nuclear installations and the abatement techniques for effluents, this paper elaborates the principle of controlling radioactive effluent concentration from nuclear installation, that is based on the BAT focusing on the abatement techniques for effluents, introduces the good practice in the projects, and optimize the effluent releases with account taken of external factors such as the site condition. (authors)

Limitation of releases of radioactive effluents for nuclear power plants in the Federal Republic of Germany

International Nuclear Information System (INIS)

Tolksdorf, P.; Buehling, A.

1981-01-01

Empirical values relating to the effluents of nuclear power plants in the Federal Republic of Germany are now available. These values cover a period of several years of operation. The measured emissions of radioactive substances are often very much below the maximum permissible values, based on the dose limits for the environment stipulated in the legal regulations. Extensive technical and administrative measures contribute to the reduction of radioactive effluents. Furthermore, additional possibilities for improvement are mentioned which may lead to a further reduction of radioactive effluents. These are derived from investigations into the release of radioactive substances in nuclear power plants. The licensing procedure in the Federal Republic of Germany in fixing discharge limits is outlined. Proposals are made concerning licence values which may be determined for the radioactive effluents in modern standardized nuclear power plants with light-water reactors. The resulting radiation exposures are quoted for a typical nuclear power plant site. (author)

ACCI38 XL 2: a useful tool for dose assessment in case of accidental atmospheric releases of radionuclides

International Nuclear Information System (INIS)

Thomassin, A.; Merle-Szeremeta, A.

2002-01-01

In the scope of its assignments in the field of nuclear risks, the French Institute for Radiation protection and Nuclear Safety (IRSN) develops tools to assess the impact of nuclear facilities on their environment and surrounding populations. The code ACCI38 XL 2 is a tool dedicated to the assessment of integrated concentrations in the environment and of dosimetric consequences on man, in case of accidental atmospheric releases of radionuclides (up to 170 radionuclides). This code is widely used by IRSN for studies on accidents, mainly for the analysis of regulatory documents from nuclear operators. The aim of this communication is to present the main features of the model used in the code ACCI38 XL 2, and to give details about the code. After a general presentation of the model, a detailed description of atmospheric dispersion, transfer in the environment and radiological impact is given. Then, some information on parameters and limitations of the model and the code are presented

Performance evaluation of of caesium, iodine, strontium and ruthenium isotopes in urban areas after contamination by accidental release

International Nuclear Information System (INIS)

Vetere, Maria Ines de Carvalho

2002-03-01

The exposures of urban populations to the radiation derived from the deposition, after accidental atmospheric releases, of I37 Cs, 134 Cs, 129 I, 131 I, 133 I, 89 Sr, l03 Ru and 106 Ru were assessed, using the integrated system for the evaluation of environmental radiological impact in emergency situations (SIEM), developed by the Instituto de Radioprotecao e Dosimetria (IRD) / Comissao Nacional de Energia Nuclear (CNEN). These radionuclides are fission products likely to be emitted in the occurrence of severe nuclear reactor accidents. Their environmental behaviour in urban areas, due to their deposition in soil, in urban surfaces and in vegetable-garden food products, such as leafy and non-leafy vegetables, were analyzed, and dose assessments at the short, medium and long terms were performed, with and without the application of protective measures for reduction of doses. Simulations of unitary initial deposition for each radionuclide and of two different potential accidents involving pressurized water reactors (PWR), with different source terms and distinct deposition for each radionuclide, were performed. Results were analyzed on the basis of the relative relevance of radionuclides and pathways for the exposure of members of the public, as a function of age and time after the release. It was also performed an assessment of the effectiveness of protective measures as a function of the moment of their implementation. (author)

Transfer of Tritium in the Environment after Accidental Releases from Nuclear Facilities. Report of Working Group 7 Tritium Accidents of EMRAS II Topical Heading Approaches for Assessing Emergency Situations. Environmental Modelling for Radiation Safety (Emras II) Programme

International Nuclear Information System (INIS)

2014-07-01

Environmental assessment models are used for evaluating the radiological impact of actual and potential releases of radionuclides to the environment. They are essential tools for use in the regulatory control of routine discharges to the environment and also in planning measures to be taken in the event of accidental releases. They are also used for predicting the impact of releases which may occur far into the future, for example, from underground radioactive waste repositories. It is important to verify, to the extent possible, the reliability of the predictions of such models by a comparison with measured values in the environment or with predictions of other models. The IAEA has been organizing programmes of international model testing since the 1980s. These programmes have contributed to a general improvement in models, in the transfer of data and in the capabilities of modellers in Member States. IAEA publications on this subject over the past three decades demonstrate the comprehensive nature of the programmes and record the associated advances which have been made. From 2009 to 2011, the IAEA organized a programme entitled Environmental Modelling for RAdiation Safety (EMRAS II), which concentrated on the improvement of environmental transfer models and the development of reference approaches to estimate the radiological impacts on humans, as well as on flora and fauna, arising from radionuclides in the environment. Different aspects were addressed by nine working groups covering three themes: reference approaches for human dose assessment, reference approaches for biota dose assessment and approaches for assessing emergency situations. This publication describes the work of the Tritium Accidents Working Group

Mathematical modeling of radionuclide release through a borehole in a radioactive waste repository

International Nuclear Information System (INIS)

Choi, Heui Joo

1996-02-01

The effects of inadvertent human intrusion as a form of direct drilling into a radioactive waste repository are discussed in this thesis. It has been mentioned that the inadvertent direct drilling into the repository could provide a release pathway for radionuclides even with its low occurrence probability. The following analyses are carried out regarding the problem. The maximum concentration in a water-filled borehole penetrating a repository is computed with a simple geometry. The modeling is based upon the assumption of the diffusive mass transfer in the waste forms and the complete mixing in the borehole. It is shown that the maximum concentrations of six radionuclides in the borehole could exceed the Maximum Permissible Concentration. Also, the diffusive mass transport in a water-filled borehole is investigated with a solubility-limited boundary condition. An analytic solution is derived for this case. Results show that the diffusive mass transport is fast enough to justify the assumption of the complete mixing compared with the considered time span. The axial diffusive mass transport along a water-filled borehole is modeled to compute the release rate taking account of the rock matrix diffusion. The results show that the release of short-lived radionuclides are negligible due to the low concentration gradient in early time and the rock matrix diffusion. The release rates of four long-lived radionuclides are computed. It is also shown that the model developed could be applied to a borehole at a non-cylindrically shaped repository and the off-center drilling of a cylindrical repository. The release rates of long-lived nuclides through a porous material-filled borehole are computed. The results show that the release of all the long-lived nuclides is negligible up to half million years in the case that the borehole is filled with the porous material. The radiological effects of the nuclides released through the borehole penetrating the repository are computed

Radioactive wastes. The management of nuclear wastes. Waste workshop, first half-year - Year 2013-2014

International Nuclear Information System (INIS)

Esteoulle, Lucie; Rozwadowski, Elodie; Duverger, Clara

2014-01-01

The first part of this report first presents radioactive wastes with their definition, and their classification (radioactivity level, radioactive half-life). It addresses the issue of waste storage by presenting the different types of storage used since the 1950's (offshore storage, surface warehousing, storage in deep geological layer), and by discussing the multi-barrier approach used for storage safety. The authors then present the French strategy which is defined in the PNGMDR to develop new management modes on the long term, to improve existing management modes, and to take important events which occurred between 2010 and 2012 into account. They also briefly present the Cigeo project (industrial centre of geological storage), and evoke controversies related to the decision to locate this project in Bure (existence of geological cracks and defects, stability and tightness of the clay layer, geothermal potential of the region, economic cost). The second part proposes an overview of the issue of nuclear waste management. The author recalls the definition of a radioactive waste, indicates the origins of these wastes and their classification. She proposes a history of the radioactive waste: discovery of radioactivity, military industrialisation and awareness of the dangerousness of radioactive wastes, nuclear wastes and recent incidents (West Valley, La Hague, Windscale). An overview of policies of nuclear waste management is given: immersion of radioactive wastes, major accidental releases, solutions on the short term and on the medium term

Regulatory analysis on criteria for the release of patients administered radioactive material. Final report

Energy Technology Data Exchange (ETDEWEB)

Schneider, S.; McGuire, S.A.

1997-02-01

This regulatory analysis was developed to respond to three petitions for rulemaking to amend 10 CFR parts 20 and 35 regarding release of patients administered radioactive material. The petitions requested revision of these regulations to remove the ambiguity that existed between the 1-millisievert (0.1-rem) total effective dose equivalent (TEDE) public dose limit in Part 20, adopted in 1991, and the activity-based release limit in 10 CFR 35.75 that, in some instances, would permit release of individuals in excess of the current public dose limit. Three alternatives for resolution of the petitions were evaluated. Under Alternative 1, NRC would amend its patient release criteria in 10 CFR 35.75 to match the annual public dose limit in Part 20 of 1 millisievert (0.1 rem) TEDE. Alternative 2 would maintain the status quo of using the activity-based release criteria currently found in 10 CFR 35.75. Under Alternative 3, the NRC would revise the release criteria in 10 CFR 35.75 to specify a dose limit of 5 millisieverts (0.5 rem) TEDE.

Regulatory analysis on criteria for the release of patients administered radioactive material. Final report

International Nuclear Information System (INIS)

Schneider, S.; McGuire, S.A.

1997-02-01

This regulatory analysis was developed to respond to three petitions for rulemaking to amend 10 CFR parts 20 and 35 regarding release of patients administered radioactive material. The petitions requested revision of these regulations to remove the ambiguity that existed between the 1-millisievert (0.1-rem) total effective dose equivalent (TEDE) public dose limit in Part 20, adopted in 1991, and the activity-based release limit in 10 CFR 35.75 that, in some instances, would permit release of individuals in excess of the current public dose limit. Three alternatives for resolution of the petitions were evaluated. Under Alternative 1, NRC would amend its patient release criteria in 10 CFR 35.75 to match the annual public dose limit in Part 20 of 1 millisievert (0.1 rem) TEDE. Alternative 2 would maintain the status quo of using the activity-based release criteria currently found in 10 CFR 35.75. Under Alternative 3, the NRC would revise the release criteria in 10 CFR 35.75 to specify a dose limit of 5 millisieverts (0.5 rem) TEDE

IAEA programmes on controlled and accidental radioactive waste dumping at sea

International Nuclear Information System (INIS)

Sjoeblom, K.L.

1993-01-01

The IAEA data base on sources of radioactive material entering the marine environment consists of two modules at present. The module Sea Disposal of Radioactive Wastes includes information on wastes containing a total activity of 140 PBq dumped between 1946 and 1992. The second module Accidents and Losses at Sea contains confirmed information on 18 accidents involving nuclear submarines, aircraft etc., as well as losses in the sea of more than 100 sealed sources. (orig.)

Calculation of releases of radioactive materials in gaseous and liquid effluents from boiling water reactors (BWR-GALE Code)

International Nuclear Information System (INIS)

Bangart, R.L.; Bell, L.G.; Boegli, J.S.; Burke, W.C.; Lee, J.Y.; Minns, J.L.; Stoddart, P.G.; Weller, R.A.; Collins, J.T.

1978-12-01

The calculational procedures described in the report reflect current NRC staff practice. The methods described will be used in the evaluation of applications for construction permits and operating licenses docketed after January 1, 1979, until this NUREG is revised as a result of additional staff review. The BWR-GALE (Boiling Water Reactor Gaseous and Liquid Effluents) Code is a computerized mathematical model for calculating the release of radioactive material in gaseous and liquid effluents from boiling water reactors (BWRs). The calculations are based on data generated from operating reactors, field tests, laboratory tests, and plant-specific design considerations incorporated to reduce the quantity of radioactive materials that may be released to the environment

Review of uncertainty estimates associated with models for assessing the impact of breeder reactor radioactivity releases

International Nuclear Information System (INIS)

Miller, C.; Little, C.A.

1982-08-01

The purpose is to summarize estimates based on currently available data of the uncertainty associated with radiological assessment models. The models being examined herein are those recommended previously for use in breeder reactor assessments. Uncertainty estimates are presented for models of atmospheric and hydrologic transport, terrestrial and aquatic food-chain bioaccumulation, and internal and external dosimetry. Both long-term and short-term release conditions are discussed. The uncertainty estimates presented in this report indicate that, for many sites, generic models and representative parameter values may be used to calculate doses from annual average radionuclide releases when these calculated doses are on the order of one-tenth or less of a relevant dose limit. For short-term, accidental releases, especially those from breeder reactors located in sites dominated by complex terrain and/or coastal meteorology, the uncertainty in the dose calculations may be much larger than an order of magnitude. As a result, it may be necessary to incorporate site-specific information into the dose calculation under these circumstances to reduce this uncertainty. However, even using site-specific information, natural variability and the uncertainties in the dose conversion factor will likely result in an overall uncertainty of greater than an order of magnitude for predictions of dose or concentration in environmental media following shortterm releases

A model for evaluating the radioactive contamination in the urban environment

International Nuclear Information System (INIS)

Hwang, Won Tae; Kim, Eun Han; Jeong, Hyo Joon; Suh, Kyung Suk; Han, Moon Hee

2005-01-01

A model for evaluating radioactive contamination in the urban environment, named METRO-K, was developed as a basic step for accident consequence analysis in case of an accidental release. The three kind of radionuclides ( 137 Cs, 106 Ru, 131 I) and the different chemical forms of iodine (particulate, organic and elemental forms) are considered in the model. The radioactive concentrations are evaluated for the five types of surface (roof, paved road, wall, lawn/soil, tree) as a function of time. Using the model, the contaminative impacts of the surfaces were intensively investigated with respect to with and without precipitation during the measurement periods of radionuclides in air. In addition, a practical application study was conducted using 137 Cs concentration in air and precipitation measured in an European country at the Chernobyl accident. As a result, precipitation was an influential factor in surface contamination. The degree of contamination was strongly dependent on the types of radionuclide and surface. Precipitation was more influential in contamination of 137 Cs than that of 131 I (elemental form)

Expedition surveys of the sea water and atmospheric air radioactive contamination in the Russian Far Eastern coastal areas and in the North- Western Pacific in connection with accident at the 'Fukushima-1' NPP

Energy Technology Data Exchange (ETDEWEB)

Nikitin, Aleksandr; Shershakov, Viacheslav; Artemev, Georgii [Research and Production Association ' Typhoon' (RPA ' Typhoon' ), Obninsk, Kaluga Region (Russian Federation); Ramzaev, Valery [Ramzaev Saint-Petersburg Research Institute of Radiation Hygiene, Saint-Petersburg (Russian Federation); Osokin, Vladimir [V.G.Khlopin Radium institute, Saint-Petersburg (Russian Federation); Sevastianov, Aleksandr [Far Eastern Regional Hydrometeorological Research Institute, Vladivostok (Russian Federation)

2014-07-01

of these measurements are presented and discussed in the paper).Laboratory radionuclide analysis of the sea water samples included more precise definition of gamma-emitters content and radiochemical determination of {sup 90}Sr, {sup 239,240}Pu and tritium. The data received allowed to conclude that the levels of contamination by radioactive products of accidental releases and discharges at 'Fukushima-1' NPP observed in investigated water areas near the Russian Federation coast of the Sea of Japan and of the Kurile-Kamchatka region of the Pacific ocean have no hazard. However, these expedition surveys indicated that wide region of the North-Western Pacific water area, located in zone of the Kuroshio current at a distance from 400 to 800 km to the east from the 'Fukushima-1' NPP, contaminated by radioactive products of accidental releases and discharges. Here the {sup 137}Cs concentration in sea water reached 30 Bq/m{sup 3} in April-May, 2011, which approximately 20 times exceed pre-accidental level. The results of 2011-2012 surveys allows to conclude that distinct penetration take place of the 'Fukushima-1' accidental products in a deep water layers, till 200 m depth at least. Correct estimation of current and potential consequences of the 'Fukushima-1' accident for the Far-Eastern water areas requires in future more detailed studies of transport with marine currents (with Kuroshio current especially) of products of accidental releases and discharges at 'Fukushima-1' NPP. (authors)

Social evaluation of intentional, truly accidental, and negligently accidental helpers and harmers by 10-month-old infants.

Science.gov (United States)

Woo, Brandon M; Steckler, Conor M; Le, Doan T; Hamlin, J Kiley

2017-11-01

Whereas adults largely base their evaluations of others' actions on others' intentions, a host of research in developmental psychology suggests that younger children privilege outcome over intention, leading them to condemn accidental harm. To date, this question has been examined only with children capable of language production. In the current studies, we utilized a non-linguistic puppet show paradigm to examine the evaluation of intentional and accidental acts of helping or harming in 10-month-old infants. In Experiment 1 (n=64), infants preferred intentional over accidental helpers but accidental over intentional harmers, suggestive that by this age infants incorporate information about others' intentions into their social evaluations. In Experiment 2 (n=64), infants did not distinguish "negligently" accidental from intentional helpers or harmers, suggestive that infants may find negligent accidents somewhat intentional. In Experiment 3 (n=64), we found that infants preferred truly accidental over negligently accidental harmers, but did not reliably distinguish negligently accidental from truly accidental helpers, consistent with past work with adults and children suggestive that humans are particularly sensitive to negligently accidental harm. Together, these results imply that infants engage in intention-based social evaluation of those who help and harm accidentally, so long as those accidents do not stem from negligence. Copyright © 2017 Elsevier B.V. All rights reserved.

Applicability of Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) to releases of radioactive substances

International Nuclear Information System (INIS)

Miller, S.R.

1987-01-01

The Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA), commonly called Superfund, provided a $1.6 billion fund (financed by a tax on petrochemical feedstocks and crude oil and by general revenues) for the cleanup of releases of hazardous substances, including source, special nuclear or byproduct material, and other radioactive substances, from mostly inactive facilities. The US Environmental Protection Agency (EPA) is authorized to require private responsible parties to clean up releases of hazardous substances, or EPA, at its option, may undertake the cleanup with monies from the Fund and recover the monies through civil actions brought against responsible parties. CERCLA imposes criminal penalties for noncompliance with its reporting requirements. This paper will overview the key provisions of CERCLA which apply to the cleanup of radioactive materials

The fractal nature of the european network for airborne radioactivity monitoring and its implications for the detectability of radioactive clouds

International Nuclear Information System (INIS)

Raes, F.; Graziani, G.

1990-01-01

Both the European Communities (EC) and the International Atomic Energy Agency (IAEA) have agreed upon a rapid exchange of radiological data among their member states, in case of nuclear emergencies. This will happen through an information network operated by the Commission of the European Communities (CEC) and/or through the Global Telecommunications System of WMO. Data coming from nation wide on-line monitoring networks will be among the very first to be exchanged. They will constitute an important source of information for the real-time assessment of the situation after large accidents with national and international impact. In particular when data on airborne radioactivity are availably early after an accidental release, they might be used to update long range transport model predictions for the period to follow. It is therefore important to analyze the national networks in an international context, to see what information they can offer and what limitations exist

Principles for establishing limits for the release of radioactive materials into the environment

International Nuclear Information System (INIS)

1978-01-01

The document provides a basic consideration of concepts and principles for use by national authorities in setting limits for planned releases of radioactive material. The following topics are discussed general concepts, assessment of dose to the critical group, assessment of collective dose commitments, application of optimization techniques to the determination of discharge limits, explanation and application of the concept of collective dose commitment, discharge limitations based on concentration indices

Environmental radioactivity in Canada 1988. Radiological monitoring annual report

Energy Technology Data Exchange (ETDEWEB)

1992-12-31

The radiological surveillance program of the Department of National Health and Welfare is conducted for the purpose of determining levels of environmental radioactivity in Canada and assessing the resulting population exposures. Following major changes to the CAMECO Port Hope operations to reduce uranium emissions, a study was initiated to measure uranium levels in air in the community. Studies continued on lung cancer and domestic exposure to radon, and current levels of cesium-137 in caribou, a major source of food in northern communities. The movement of tritium on the Ottawa and St. Lawrence rivers was studied following an accidental release into the Ottawa River. Monitoring continued of fallout contamination from Chernobyl in imported foods. All measurements recorded during 1988 were below the limits recommended by the International Commission on Radiological Protection. (14 refs., 14 figs., 15 tabs.).

Radiation protection requirements in the limitation of the release of radioactive effluents

International Nuclear Information System (INIS)

Beninson, D.

1978-01-01

The paper summarizes the requirements of radiation protection, as presented in the new ICRP recommendation, in relation to the limitation of the release of radioactive effluents. The concepts of effective dose equivalent and collective dose equivalent are used in the presentation of the optimization procedures and the dose limitation to individuals. The dose commitment is used for the procedures applied to control future exposures. An appendix describes the basic concepts and quantities used in assessments of human exposures and risks. (author)

Radioactive decay data tables: a handbook of decay data for application to radiation dosimetry and radiological assessments

International Nuclear Information System (INIS)

Kocher, D.C.

1982-01-01

Reviews compendium containing recommended decay data for approx. 500 radionuclides of interest in nuclear medicine and fusion reactor technology or of potential importance in routine or accidental releases from the nuclear fuel cycle. Primary source of the decay data presented in this handbook is the Evaluated Nuclear Structure Data File (ENSDF), developed and maintained by the US Nuclear Data Network. Topics covered include various radioactive decay processes; evaluation process and standards of ENSDF; tables and computer code MEDLIST used to produce ENSDF tables; radiation dosimetry and radiological assessments; parent-daughter activity ratios wherever the adopted decay data may contain significant uncertainties or errors due to the lack of appropriate experimental data

PABLM, Doses from Radioactive Releases to Atmosphere and Food Chain

International Nuclear Information System (INIS)

Napier, B.A.; Kennedy, W.E. Jr.; Soldat, J.K.

1983-01-01

1 - Description of problem or function: PABLM calculates internal radiation doses to man from radionuclides in food products and external radiation doses from radionuclides in the environment. Radiation doses from radionuclides in the environment may be calculated from deposition on the soil or plants during an atmospheric or liquid release, or from exposure to residual radionuclides after the releases have ended. Radioactive decay is considered during the release, after deposition, and during holdup of food after harvest. The radiation dose models consider exposure to radionuclides deposited on the ground or crops from contaminated air or irrigation water, radionuclides in contaminated drinking water, aquatic foods raised in contaminated water, and radionuclides in bodies of water and sediments where people might fish, boat, or swim. For vegetation, the radiation dose model considers both direct deposition and uptake through roots. Doses may be calculated for either a maximum-exposed individual or for a population group. The program is designed to calculate accumulated radiation doses from the chronic ingestion of food products that contain radionuclides and doses from the external exposure to radionuclides in the environment. A first-year committed dose is calculated as well as an integrated dose for a selected number of years. 2 - Method of solution: A chain decay scheme including branching for transitions to and from isomeric states is used for radioactive decay. The equations for calculating internal radiation doses are derived from those given by the International Commission on Radio- logical Protection (ICRP) for body burdens and the maximum possible concentration (MPC) for each radionuclide. These doses are calculated as a function of radionuclide concentration in food products, ingestion rates, and a radionuclide-specific dose- commitment factor. Radiation doses from external exposure to contaminated water and soil are calculated using the basic assumption

Distributed emergency response system to model dispersion and deposition of atmospheric releases

International Nuclear Information System (INIS)

Taylor, S.S.

1985-04-01

Aging hardware and software and increasing commitments by the Departments of Energy and Defense have led us to develop a new, expanded system to replace the existing Atmospheric Release Advisory Capability (ARAC) system. This distributed, computer-based, emergency response system is used by state and federal agencies to assess the environmental health hazards resulting from an accidental release of radioactive material into the atmosphere. Like its predecessor, the expanded system uses local meteorology (e.g., wind speed and wind direction), as well as terrain information, to simulate the transport and dispersion of the airborne material. The system also calculates deposition and dose and displays them graphically over base maps of the local geography for use by on-site authorities. This paper discusses the limitations of the existing ARAC system. It also discusses the components and functionality of the new system, the technical difficulties encountered and resolved in its design and implementation, and the software methodologies and tools employed in its development

Radioactivity and foods

International Nuclear Information System (INIS)

Olszyna Marzys, A.E.

1991-01-01

The purpose of this article is to describe and contrast two relationships between radiation and food-on the one hand, beneficial preservation of food by controlled exposure to ionizing radiation; and, on the other, contamination of food by accidental incorporation of radioactive nuclides within the food itself. In food irradiation, electrons or electromagnetic radiation is used to destroy microorganisms and insects or prevent seed germination. The economic advantages and health benefits of sterilizing food in this manner are clear, and numerous studies have confirmed that under strictly controlled conditions no undesirable changes or induced radioactivity is produced in the irradiated food. An altogether different situation is presented by exposure of food animals and farming areas to radioactive materials, as occurred after the major Soviet nuclear reactor accident at Chernobyl. This article furnishes the basic information needed to understand the nature of food contamination associated with that event and describes the work of international organizations seeking to establish appropriate safe limits for levels of radioactivity in foods. 14 refs, 4 tabs

Radiation impact caused by the rupture of a radioactive tank within the Reactor Auxiliary Building of Angra 2

International Nuclear Information System (INIS)

Passos, Erivaldo Mario dos; Alves, Antonio Sergio de Martin

2002-01-01

This paper aims to show the methodology, the parameters and some results of the radionuclide migration simulation in order to determine the radiation impact to the biosphere due to an accidental radionuclide release associated with the rupture of a radioactive tank within the Reactor Auxiliary Building of Angra 2. After tank rupture, the radionuclides are supposed to reach the sea via the aquifer of the Angra 2 site. This radiological impact is evaluated with the aid of the activity concentration at the sea and dose received by members of the public. Activity concentration for each radionuclide is calculated according to the ANSI/ANS - 2.17 - 1980, which shows the methodology for calculation of activity concentration in the aquifer in case of accidental radionuclide releases of nuclear power plants, whereas the dose calculation follows recognized international procedures. The migration analysis for the mentioned radionuclides is performed through the aquifer and allows to estimate the maximum activity concentration near the sea boundary and the annual dose to the member of the public. Based on the safety analysis performed for the investigated case one can conclude the annual dose impact is lower than that corresponding to one year of normal operation of the Angra 2 plant. (author)

Consequence Analysis of Release from KN-18 Cask during a Severe Transportation Accident

International Nuclear Information System (INIS)

Lim, Heoksoon; Bhang, Giin; Na, Janghwan; Ban, Jaeha; Kim, Myungsu

2015-01-01

Korea Hydro and Nuclear Power (KHNP) has launched a project entitled 'Development of APR1400 Physical Protection System Design' and conducting a new conceptual physical protection system(PPS) design. One of mayor contents is consequence analysis for spent nuclear fuel cask. Proper design of physical protection system for facilities and storage and transformation involving nuclear and radioactive material requires the quantification of potential consequence from prescribed sabotage and theft scenarios in order to properly understand the level of PPS needed for specific facilities and materials. An important aspect of the regulation of the nuclear industry is assessing the risk to the public and the environment from a release of radioactive material produced by accidental or intentional scenarios. This paper describes the consequence analysis methodology, structural analysis for KN-18 cask and results of release from the cask during a severe transportation accident. Accident during spent fuel cask transportation was numerically calculated for KN-18, and showed the integrity of the fuel assemblies and cask itself was unharmed on a scenario that is comparable to state of art NRC research. Even assumption of leakage as a size of 1 x 10''2 mm''2 does not exceed for a certain criteria at any distance

Consequence Analysis of Release from KN-18 Cask during a Severe Transportation Accident

Energy Technology Data Exchange (ETDEWEB)

Lim, Heoksoon; Bhang, Giin; Na, Janghwan; Ban, Jaeha; Kim, Myungsu [KAERI, Daejeon (Korea, Republic of)

2015-05-15

Korea Hydro and Nuclear Power (KHNP) has launched a project entitled 'Development of APR1400 Physical Protection System Design' and conducting a new conceptual physical protection system(PPS) design. One of mayor contents is consequence analysis for spent nuclear fuel cask. Proper design of physical protection system for facilities and storage and transformation involving nuclear and radioactive material requires the quantification of potential consequence from prescribed sabotage and theft scenarios in order to properly understand the level of PPS needed for specific facilities and materials. An important aspect of the regulation of the nuclear industry is assessing the risk to the public and the environment from a release of radioactive material produced by accidental or intentional scenarios. This paper describes the consequence analysis methodology, structural analysis for KN-18 cask and results of release from the cask during a severe transportation accident. Accident during spent fuel cask transportation was numerically calculated for KN-18, and showed the integrity of the fuel assemblies and cask itself was unharmed on a scenario that is comparable to state of art NRC research. Even assumption of leakage as a size of 1 x 10''2 mm''2 does not exceed for a certain criteria at any distance.

Hazard of radioactive releases resulted from coal burning; Opasnost` vysvobozhdeniya radioaktivnykh produktov pri szhiganii uglya

Energy Technology Data Exchange (ETDEWEB)

Gabbard, V

1995-09-01

Consideration is given to the data, pointing to the fact, that coal-burning power plants release of radioactive substances, contained in gaseous wastes, is not less, than the same one of nuclear power plants. The necessity of regulating emission of these substance in atmosphere by analogy with nuclear power industry is shown. 1 fig.

Atmospheric plume progression as a function of time and distance from the release point for radioactive isotopes.

Science.gov (United States)

Eslinger, Paul W; Bowyer, Ted W; Cameron, Ian M; Hayes, James C; Miley, Harry S

2015-10-01

The radionuclide network of the International Monitoring System comprises up to 80 stations around the world that have aerosol and xenon monitoring systems designed to detect releases of radioactive materials to the atmosphere from nuclear explosions. A rule of thumb description of plume concentration and duration versus time and distance from the release point is useful when designing and deploying new sample collection systems. This paper uses plume development from atmospheric transport modeling to provide a power-law rule describing atmospheric dilution factors as a function of distance from the release point. Consider the plume center-line concentration seen by a ground-level sampler as a function of time based on a short-duration ground-level release of a nondepositing radioactive tracer. The concentration C (Bq m(-3)) near the ground varies with distance from the source with the relationship C=R×A(D,C) ×e (-λ(-1.552+0.0405×D)) × 5.37×10(-8) × D(-2.35) where R is the release magnitude (Bq), D is the separation distance (km) from the ground level release to the measurement location, λ is the decay constant (h(-1)) for the radionuclide of interest and AD,C is an attenuation factor that depends on the length of the sample collection period. This relationship is based on the median concentration for 10 release locations with different geographic characteristics and 365 days of releases at each location, and it has an R(2) of 0.99 for 32 distances from 100 to 3000 km. In addition, 90 percent of the modeled plumes fall within approximately one order of magnitude of this curve for all distances. Copyright © 2015 Elsevier Ltd. All rights reserved.

radionuclides modelling dispersion of in the atmosphere for continuous discharges and accidental

International Nuclear Information System (INIS)

Teyeb, Malika

2011-01-01

The study of the dispersion of radionuclides in the atmosphere is the subject of a physical and numerical modeling of the phenomenon of dispersion. This work aims to study the atmospheric dispersion of accidental releases and continuous, from the possible establishment of a nuclear pressurized water reactor in the potential in Bizerte and Skhira.

Decree No 74-1181 of 31 December 1974 concerning liquid radioactive effluent releases from nuclear installations

International Nuclear Information System (INIS)

1975-01-01

This Decree prescribes the licensing procedure for the release of liquid wastes from nuclear installations as well as the technical supervision of such operations. It does not apply to the transport of radioactive effluents which is governed by the regulations on the transport of dangerous goods. (NEA) [fr

Structural and Thermal Safety Analysis Report for the Type B Radioactive Waste Transport Package

Energy Technology Data Exchange (ETDEWEB)

Kim, D. H.; Seo, K. S.; Lee, J. C.; Bang, K. S

2007-09-15

We carried out structural safety evaluation for the type B radioactive waste transport package. Requirements for type B packages according to the related regulations such as IAEA Safety Standard Series No. TS-R-1, Korea Most Act. 2001-23 and US 10 CFR Part 71 were evaluated. General requirements for packages such as those for a lifting attachment, a tie-down attachment and pressure condition were considered. For the type B radioactive waste transport package, the structural, thermal and containment analyses were carried out under the normal transport conditions. Also the safety analysis were conducted under the accidental transport conditions. The 9 m drop test, 1 m puncture test, fire test and water immersion test under the accidental transport conditions were consecutively done. The type B radioactive waste transport packages were maintained the structural and thermal integrities.

Methods For Calculating Thyroid Doses to The Residents Of Ozersk Due to 131I Releases From The Stacks of The Mayak Production Association

Energy Technology Data Exchange (ETDEWEB)

Rovny, Sergey I.; Mokrov, Y.; Stukalov, Pavel M.; Beregich, D. A.; Teplyakov, I. I.; Anspaugh, L. R.; Napier, Bruce A.

2009-10-23

The Mayak Production Association (MPA) was established in the late 1940s in accordance with a special Decree of the USSR Government for the production of nuclear weapons. In early years of MPA operation, due to the lack of experience and absence of effective methods of RW management, the enterprise had extensive routine (designed) and non-routine (accidental) releases of gaseous radioactive wastes to the atmosphere. These practices resulted in additional technogenic radiation exposure of residents inhabiting populated areas near the MPA. The primary objective of ongoing studies under JCCRER Project 1.4 is to estimate doses to the residents of Ozersk due to releases of radioactive substances from the stacks of MPA. Preliminary scoping studies have demonstrated that releases of radioactive iodine (131I) from the stacks of the Mayak Radiochemical Plant represented the major contribution to the dose to residents of Ozersk and of other nearby populated areas. The behavior of 131I in the environment and of 131I migration through biological food chains (vegetation-cows-milk-humans) indicated a need for use of special mathematical models to perform the estimation of radiation doses to the population. The goal of this work is to select an appropriate model of the iodine migration in biological food chains and to justify numerical values of the model parameters.

Restoration of water environment contaminated by radioactive cesium released from Fukushima Daiichi NPP

Energy Technology Data Exchange (ETDEWEB)

Takeshita, K.; Takahashi, H. [Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 157-8550 (Japan); Jinbo, Y. [CDM Cosulting Co.Ltd., 1-13-13 Tsukiji Chuo-ku Tokyo 104-0045 (Japan); Ishido, A. [Radwaste and Decommissioning Center, 1-7-6 Toranomon, Minato-ku, Tokyo 105-0001 (Japan)

2013-07-01

In the Fukushima Daiichi NPP Accident, large amounts of volatile radioactive nuclides, such as {sup 131}I, {sup 134}Cs and {sup 137}Cs, were released to the atmosphere and huge areas surrounding the nuclear site were contaminated by the radioactive fallout. In this study, a combined process with a hydrothermal process and a coagulation settling process was proposed for the separation of radioactive Cs from contaminated soil and sewage sludge. The coagulation settling operation uses Prussian Blue (Ferric ferrocyanide) and an inorganic coagulant. The recovery of Cs from sewage sludge sampled at Fukushima city (100.000 Bq/kg) and soil at a nearby village (55.000 Bq/kg), was tested. About 96% of Cs in the sewage sludge was removed successfully by combining simple hydrothermal decomposition and coagulation settling. However, Cs in the soil was not removed sufficiently by the combined process (Cs removal is only 56%). The hydrothermal decomposition with blasting was carried out. The Cs removal from the soil was increased to 85%. When these operations were repeated twice, the Cs recovery was over 90%. The combined process with hydrothermal blasting and coagulation settling is applicable to the removal of Cs from highly contaminated soil.

Intermediate range atmospheric transport and technology assessments: nuclear pollutants

International Nuclear Information System (INIS)

Rohwer, P.S.; Hoffman, F.O.; Miller, C.W.

1981-01-01

Mathematical models have been used to assess potential impacts of radioactivity releases during all phases of our country's development of nuclear power. Experience to date has shown that in terms of potential dose to man, the most significant releases of radioactivity from nuclear fuel cycle facilities are those to the atmosphere. Our ability to predict atmospheric dispersion will, therefore, ultimately affect our capability to understand and assess the significance of both routine and accidental discharges of radionuclides. Assessment of potential radiological exposures from postulated routine and accidental releases of radionuclides from the fast-breeder reactor will require the use of atmospheric dispersion models, and the design, siting, and licensing of breeder reactor fuel cycle facilities will be influenced by the predictions made by these models

LNG containment release: Comparison of NFPA-59A and 49-CFR-193

International Nuclear Information System (INIS)

West, H.H.; Pfenning, D.B.

1994-01-01

Due to the potential wide area impact of an unplanned LNG (Liquefied Natural Gas) release, the National Fire Protection Association (NFPA) and later the US Department of Transportation issued standards and regulations which included specific methodologies for analyzing the consequence of an accidental LNG release. The concept of a ''design spill'' was defined in order to evaluate the consequences of an accidental LNG release, with particular attention to the influence of safety protective measures. In addition to specifying the magnitude of the unplanned release, the design spill also specified some of the parameters for estimation of the downwind LNG vapor dispersion and the extent of the radiant heat from an LNG pool fire. Since the NFPA-59A and 49-CFR-193 standards were the first in-depth regulation to address consequence analysis estimation for petroleum components, it is particularly important to consider their details in light of the recently proposed EPA 40-CFR-68 regulations [Risk Management for Chemical Accidental Release Prevention] which specifically address consequence analysis as a part of process safety management

Review of IAEA recommendations on the principles and methodologies for limiting releases of radioactive effluents to the environment

International Nuclear Information System (INIS)

Ahmed, J.U.

1988-01-01

The limitation of radioactive releases is governed by the basic principles of radiation protection as presented in the ICRP Publication No. 26 and IAEA Safety Series No. 9. Unter its current programme on release limitation the IAEA issued Safety Series No. 77 on principles for release limitation and Safety Series No. 67 on protection against transboundary radiation exposures. A Safety Guide on global upper bounds is now nearly ready for publication, and to guide on the application of Safety Series No. 77, four documents are in various stages of completion

Effect of the foodchain in radioactivities released from thermal power plants

International Nuclear Information System (INIS)

Okamoto, K.

1980-01-01

Food chains involving 210 Pb and 210 Po have been investigated in Japan, with special reference to the vegetable and sea food chain. Although much smaller than the natural background, the collective dose of coal burning including this food chain was 100 to 1000 times larger than that excluding it, the Suess effect being too small to cancel it. The dose due to coal burning was comparable to or even greater than that of nuclear energy. The need for further investigation of radioactive release due to the oil and natural gas industries is also emphasised, with particular reference to radon and its daughters 210 Pb and 210 Po. (U.K.)

Automated data system for emergency meteorological response

International Nuclear Information System (INIS)

Kern, C.D.

1975-01-01

The Savannah River Plant (SRP) releases small amounts of radioactive nuclides to the atmosphere as a consequence of the production of radioisotopes. The potential for larger accidental releases to the atmosphere also exists, although the probability for most accidents is low. To provide for emergency meteorological response to accidental releases and to conduct research on the transport and diffusion of radioactive nuclides in the routine releases, a series of high-quality meteorological sensors have been located on towers in and about SRP. These towers are equipped with instrumentation to detect and record temperature and wind turbulence. Signals from the meterological sensors are brought by land-line to the SRL Weather Center-Analysis Laboratory (WC-AL). At the WC-AL, a Weather Information and Display (WIND) system has been installed. The WIND system consists of a minicomputer with graphical displays in the WC-AL and also in the emergency operating center (EOC) of SRP. In addition, data are available to the system from standard weat []er teletype services, which provide both routine surface weather observations and routine upper air wind and temperature observations for the southeastern United States. Should there be an accidental release to the atmosphere, available recorded data and computer codes would allow the calculation and display of the location, time, and downwind concentration of the atmospheric release. These data are made available to decision makers in near real-time to permit rapid decisive action to limit the consequences of such accidental releases. (auth)

Guidelines on the medical therapy of persons accidentally overexposed to ionizing radiations. External contamination; Guia para el tratamiento de personas accidentalmente sobreexpuestas a las radiaciones ionizantes. Contaminacion externa

Energy Technology Data Exchange (ETDEWEB)

Perez, M R; Di Trano, J L; Gisone, P

1998-07-01

The document represents a guide for the external decontamination of persons accidentally radio contaminated due to the use, production or transport of radioactive materials. The general conditions, from the medical point of view, to be kept in mind, in the event of accidental overexposures as decontamination treatment and the handling of samples are detailed throughout report. The external contamination without injury in skin or with wound its considered. The distribution of measures and responsibilities for the therapy of the irradiated patients with radioactive materials are enumerated. The preparations of decontaminate solutions are detailed in this work. Moreover, forms for the reception, physical evaluation of the patient and external contamination are presented. (author)

Illustrative assessment of human health issues arising from the potential release of chemotoxic substances from a generic geological disposal facility for radioactive waste.

Science.gov (United States)

Wilson, James C; Thorne, Michael C; Towler, George; Norris, Simon

2011-12-01

Many countries have a programme for developing an underground geological disposal facility for radioactive waste. A case study is provided herein on the illustrative assessment of human health issues arising from the potential release of chemotoxic and radioactive substances from a generic geological disposal facility (GDF) for radioactive waste. The illustrative assessment uses a source-pathway-receptor methodology and considers a number of human exposure pathways. Estimated exposures are compared with authoritative toxicological assessment criteria. The possibility of additive and synergistic effects resulting from exposures to mixtures of chemical contaminants or a combination of radiotoxic and chemotoxic substances is considered. The case study provides an illustration of how to assess human health issues arising from chemotoxic species released from a GDF for radioactive waste and highlights potential difficulties associated with a lack of data being available with which to assess synergistic effects. It also highlights how such difficulties can be addressed.

Illustrative assessment of human health issues arising from the potential release of chemotoxic substances from a generic geological disposal facility for radioactive waste

International Nuclear Information System (INIS)

Wilson, James C; Towler, George; Thorne, Michael C; Norris, Simon

2011-01-01

Many countries have a programme for developing an underground geological disposal facility for radioactive waste. A case study is provided herein on the illustrative assessment of human health issues arising from the potential release of chemotoxic and radioactive substances from a generic geological disposal facility (GDF) for radioactive waste. The illustrative assessment uses a source–pathway–receptor methodology and considers a number of human exposure pathways. Estimated exposures are compared with authoritative toxicological assessment criteria. The possibility of additive and synergistic effects resulting from exposures to mixtures of chemical contaminants or a combination of radiotoxic and chemotoxic substances is considered. The case study provides an illustration of how to assess human health issues arising from chemotoxic species released from a GDF for radioactive waste and highlights potential difficulties associated with a lack of data being available with which to assess synergistic effects. It also highlights how such difficulties can be addressed.

General Atomic's radioactive gas recovery system

International Nuclear Information System (INIS)

Mahn, J.A.; Perry, C.A.

1975-01-01

General Atomic Company has developed a Radioactive Gas Recovery System for the HTGR which separates, for purposes of retention, the radioactive components from the non-radioactive reactor plant waste gases. This provides the capability for reducing to an insignificant level the amount of radioactivity released from the gas waste system to the atmosphere--a most significant improvement in reducing total activity release to the environment. (U.S.)

Forecasting the consequences of accidental releases of radionuclides in the atmosphere from ensemble dispersion modelling

International Nuclear Information System (INIS)

Galmarini, S.; Bianconi, R.; Bellasio, R.; Graziani, G.

2001-01-01

The RTMOD system is presented as a tool for the intercomparison of long-range dispersion models as well as a system for support of decision making. RTMOD is an internet-based procedure that collects the results of more than 20 models used around the world to predict the transport and deposition of radioactive releases in the atmosphere. It allows the real-time acquisition of model results and their intercomparison. Taking advantage of the availability of several model results, the system can also be used as a tool to support decision making in case of emergency. The new concept of ensemble dispersion modelling is introduced which is the basis for the decision-making application of RTMOD. New statistical parameters are presented that allow gathering the results of several models to produce a single dispersion forecast. The devised parameters are presented and tested on the results of RTMOD exercises

Historical releases of radioactivity to the environment from ORNL

International Nuclear Information System (INIS)

Ohnesorge, W.F.

1986-05-01

This report gives a brief history and assessment of ORNL radionuclide releases to the environment. A short history and an inventory of radioactivity disposed of by shallow land burial and hydrofracture techniques are given along with a brief discussion of the potential environmental impact of these disposed materials. The data available for this report varied greatly in quality. Data on contaminated liquid waste and liquids discharged to the environment are much more reliable than early data on contaminated air discharges and contaminated solid waste. Data for more recent years are more complete and reliable than data obtained from records dating back to the early history of the laboratory. The data presented here do not include materials retrievably stored (with the exception of uranium solid waste data) or inventories of materials stored in operating or surplus facilities since these materials presently have no contact with or loss to the environment

The present status and recent applications of the accidental tritium assessment code UFOTRI

International Nuclear Information System (INIS)

Raskob, W.

1999-01-01

The computer program UFOTRI can be used for assessing the impact of accidental released tritium in the two chemical forms tritiated water vapour and tritium gas. By applying UFOTRI to potential European sites for ITER, it could be demonstrated that the main goal, the nonevacuation criteria, is fulfilled for the present release limits. Contributions in international studies together with the re-evaluation of experimental data showed that the plant sub-model as well as the soil sub-model are areas for further improvement. (author)

Selection of highway routes for the shipment of radioactive materials within the Commonwealth of Virginia

International Nuclear Information System (INIS)

Hobeika, A.G.; Jamei, B.; Santoso, I.B.

1986-01-01

In this study Virginia Electric and Power Company proposed to ship limited quantities of irradiated nuclear fuel from Surry to North Anna in Virginia. Eight routes were considered as candidate routes for shipment. The objectives of this study are: To minimize the accidental-release radiation risk to people and property; and to maximize the community preparedness in terms of emergency response and evacuation capability. To determine the ''Preferred'' route and the alternative route for highway shipments of radioactive material, a conceptual approach was developed, based on the following three principles: Feasibility; Evaluation; and Choice. The feasibility of a candidate route is first established. Then all feasible routes are evaluated under the same criteria, which would lead to the choice of the best feasible route

The development of the American national standard, ''control of radioactive surface contamination on materials, equipment and facilities to be released for uncontrolled use''

International Nuclear Information System (INIS)

Shapiro, J.

1980-01-01

The American National Standard, Control of Radioactive Surface Contamination on Materials, Equipment and Facilities to be Released for Uncontrolled Use, was developed under the procedures of ANSI for ANSI Main Committee N13 (Radiation Protection) by a working group of the Health Physics Society Standards Committee. This standard provides criteria for the control of materials, equipment and facilities contaminated with radioactivity proposed to be released for uncontrolled use. Permissible contamination limits are specified as well as methods assessing the levels of contamination. This paper reviews the proceedings of the Subcommittee on Radioactive Surface Contamination, the comments received by reviewers of the standard, the resolution of the committee, and the bases for reaching the final limits, recommendations, and measurement procedures. (H.K.)

The terrestrial environmental dynamics of radioactive nuclides released by the Fukushima nuclear accident

International Nuclear Information System (INIS)

Furukawa, Jun

2014-01-01

Research into environmental dynamics of radioactive nuclides released by the Fukushima nuclear accident, especially radiocesium 137 Cs (half-life, 30.1 years), is highly focused especially on diffusion processes of radiocesium into ecosystems, which is high-priority knowledge. Because of relatively sparse knowledge about the reallocation of radiocesium contained in organic matter in terrestrial ecosystems, the effects of diffused rediocesium into ecosystem cannot be accurately estimated. In this article, the terrestrial environmental dynamics of radiocesium mainly in the processes of plant uptake and the possibility of release from plants will be discussed. Plants uptake minerals from soil and these minerals are likewise ingested by animals that feed on plants, including humans. Therefore one of the main gateways of radiocesium into ecosystem is via plants. From the viewpoint of human dietary consumption, rice contamination with radiocesium has been energetically investigated and useful data are accumulating. Processes of radiocesium uptake mechanisms by plants are being researched using legumes, e.g. soybean. Speculation on the possibility of radiocesium release into forest atmosphere via plant activity will be introduced. (author)

Screening calculations for radioactive waste releases from non-nuclear facilities

International Nuclear Information System (INIS)

Xu, Shulan; Soederman, Ann-Louis

2009-02-01

A series of screening calculations have been performed to assess the potential radiological consequences of discharges of radioactive substances to the environment arising from waste from non-nuclear practices. Solid waste, as well as liquids that are not poured to the sewer, are incinerated and ashes from incineration and sludge from waste water treatment plants are disposed or reused at municipal disposal facilities. Airborne discharges refer to releases from an incineration facility and liquid discharges refer both to releases from hospitals and laboratories to the sewage system, as well as leakage from waste disposal facilities. The external exposure of workers is estimated both in the waste water treatment plant and at the disposal facility. The calculations follow the philosophy of the IAEA's safety guidance starting with a simple assessment based on very conservative assumptions which may be iteratively refined using progressively more complex models, with more realistic assumptions, as necessary. In the assessments of these types of disposal, with cautious assumptions, carried out in this report we conclude that the radiological impacts on representative individuals in the public are negligible in that they are small with respect to the target dose of 10 μSv/a. A Gaussian plume model was used to estimate the doses from airborne discharges from the incinerator and left a significant safety margin in the results considering the conservative assumptions in the calculations. For the sewage plant workers the realistic approach included a reduction in working hours and the shorter exposure time resulted in maximum doses around 10 μSv/a. The calculations for the waste disposal facility show that the doses are higher or in the range of the target dose. The excess for public exposure is mainly caused by H-3 and C-14. The assumption used in the calculation is that all of the radioactive substances sent to the incineration facility and waste water treatment plant

Screening calculations for radioactive waste releases from non-nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Shulan Xu; Soederman, Ann-Louis

2009-02-15

A series of screening calculations have been performed to assess the potential radiological consequences of discharges of radioactive substances to the environment arising from waste from non-nuclear practices. Solid waste, as well as liquids that are not poured to the sewer, are incinerated and ashes from incineration and sludge from waste water treatment plants are disposed or reused at municipal disposal facilities. Airborne discharges refer to releases from an incineration facility and liquid discharges refer both to releases from hospitals and laboratories to the sewage system, as well as leakage from waste disposal facilities. The external exposure of workers is estimated both in the waste water treatment plant and at the disposal facility. The calculations follow the philosophy of the IAEA's safety guidance starting with a simple assessment based on very conservative assumptions which may be iteratively refined using progressively more complex models, with more realistic assumptions, as necessary. In the assessments of these types of disposal, with cautious assumptions, carried out in this report we conclude that the radiological impacts on representative individuals in the public are negligible in that they are small with respect to the target dose of 10 muSv/a. A Gaussian plume model was used to estimate the doses from airborne discharges from the incinerator and left a significant safety margin in the results considering the conservative assumptions in the calculations. For the sewage plant workers the realistic approach included a reduction in working hours and the shorter exposure time resulted in maximum doses around 10 muSv/a. The calculations for the waste disposal facility show that the doses are higher or in the range of the target dose. The excess for public exposure is mainly caused by H-3 and C-14. The assumption used in the calculation is that all of the radioactive substances sent to the incineration facility and waste water treatment

Technical committee meeting on evaluation of radioactive materials release and sodium fires in fast reactors

International Nuclear Information System (INIS)

1996-01-01

The objectives of the Technical Committee Meeting was to review the activities of research on radioactive materials release and sodium fires in fast reactors in each of the participating countries. It covered: out-of-pile experiments and analysis codes on source term; in-pile experiments on source term; core disruptive accidents; sodium leak experience in liquid metal fast reactors; evaluation of sodium fire; and aerosol behaviour

Technical committee meeting on evaluation of radioactive materials release and sodium fires in fast reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

The objectives of the Technical Committee Meeting was to review the activities of research on radioactive materials release and sodium fires in fast reactors in each of the participating countries. It covered: out-of-pile experiments and analysis codes on source term; in-pile experiments on source term; core disruptive accidents; sodium leak experience in liquid metal fast reactors; evaluation of sodium fire; and aerosol behaviour.

Concept and approaches used in assessing individual and collective doses from releases of radioactive effluents

International Nuclear Information System (INIS)

1988-06-01

To guide on the applications of the principles for limiting radioactive releases contained in Safety Series 77, the Agency is in the process of preparing a number of safety guides. The first one is this present document which deals with the principal aspects of the methods for the assessment of the individual and collective dose. It aims at giving a general guidance to those responsible for establishing programmes for the determination of individual doses as well as collective doses in connection with licensing a site for a nuclear installation. The document is concerned with the principles applied for calculating individual and collective doses from routine releases of radionuclides to the atmosphere and hydrosphere but not releases directly to the geosphere, as in waste management. These areas will be covered by other Agency publications. 75 refs, figs and tabs

A general advection-diffusion model for radioactive substance dispersion released from nuclear power plants

International Nuclear Information System (INIS)

Buske, D.

2011-01-01

The present contribution focuses on the question of radioactive material dispersion after discharge from a nuclear power plant in the context of micro-meteorology, i.e. an atmospheric dispersion model. The advection-diffusion equation with Fickian closure for the turbulence is solved for the atmospheric boundary layer where the eddy diffusivity coefficients and the wind profile are assumed to be space dependent. The model is solved in closed form using integral transform and spectral theory. Convergence of the solution is discussed in terms of a convergence criterion using a new interpretation of the Cardinal Theorem of Interpolation theory and Parseval's theorem. The solution is compared to other methods and model adequacy is analyzed. Model validation is performed against experimental data from a controlled release of radioactive material at the Itaorna Beach (Angra dos Reis, Rio de Janeiro state, Brazil, 1985). (author)

Storage containers for radioactive material

International Nuclear Information System (INIS)

Cassidy, D.A.; Dates, L.R.; Groh, E.F.

1981-01-01

A radioactive material storage system is disclosed for use in the laboratory. This system is composed of the following: a flat base plate with a groove in one surface thereof and a hollow pedestal extending perpendicularly away from the other surface thereof; a sealing gasket in the groove, a cover having a filter therein and an outwardly extending flange which fits over the plate; the groove and the gasket, and a clamp for maintaining the cover and the plate are sealed together, whereby the plate and the cover and the clamp cooperate to provide a storage area for radioactive material readily accessible for use or inventory. Wall mounts are provided to prevent accidental formation of critical masses during storage

Impact on the marine environment of radioactive releases resulting from the Fukushima-Daiichi nuclear accident. May 13, 2011

International Nuclear Information System (INIS)

2011-01-01

This information note updates and supplements the previous note of 4 April on the same subject. It describes the origins of the contamination of the marine environment (Direct releases into the sea close to the damaged reactors, atmospheric fall-out onto the surface of the sea, transport of radioactive pollution by leaching of contaminated soil). Then, while proposing several maps, the authors analyse and comment the dispersion in the sea of radioactive pollutants: ocean currents off the Japanese coasts, charts showing the distribution of caesium 137 in seawater, and results of simulations of dispersion. The report briefly discusses the impact of radioactive pollution on living species: concentrations observed in fish, expected concentrations based on the seawater measurements. Finally, it briefly discusses the presence of radionuclides in sediments

Spatio-temporal variability of the deposited radioactive materials in forest environments after the Fukushima Daiichi NPP accident

Science.gov (United States)

Kato, H.; Onda, Y.; Komatsu, Y.; Yoda, H.

2012-12-01

Soil, vegetation and other ecological compartments are expected to be highly contaminated by the deposited radionuclides after the Fukushima Daiichi nuclear power plant (NPP) accident triggered by a magnitude 9.1 earthquake and the resulting tsunami on Marchi 11, 2011. Study site have been established in Yamakiya district, Kawamata Town, Fukushima prefecture, located about 35 km from Fukushima power plant, and designated as the evacuated zone. The total deposition of radioactive materials at the study site ranged from 0.02to >10 M Bq/m2 for Cs-137. The mature cedar, young cedar, and broad-leaf stands were selected as experimental site for the monitoring of spatio-temporal variability of the deposited radionuclides after the accidental release of radioactive materials. In order to measure the vertical distribution of radioactivity in forest, a tower with the same height of tree have been established at each experimental site. The measurement of radioactivity by using a portable Ge gamma-ray detector (Detective-DX-100, Ortec) and radionuclide analysis of leaf samples at different height revealed that a large proportion of radionuclides which deposited on forest were trapped by canopies of the cedar forests. In contrast, in the broad-leaf forest highest radioactivity was found at the forest floor. Furthermore, spatio-temporal variability of radioactivity at the forest floor indicated that huge amount of caesium still remains on the canopy of coniferous forest, and subsequently transfers to forest floor in association with throughfall, stemflow, and litter fall.

Evaluation method of gas leakage rate from transportation casks of radioactive materials (gas leakage rates from scratches on O-ring surface)

International Nuclear Information System (INIS)

Aritomi, Masanori; Li Ninghua; Asano, Ryoji; Kawa, Tsunemichi

2004-01-01

A sealing function is essential for transportation and/or storage casks of radioactive materials under both normal and accidental operating conditions in order to prevent radioactive materials from being released into the environment. In the safety analysis report, the release rate of radioactive materials into the environment is evaluated using the correlations specified in the ANSI N14.5, 1987. The purposes of the work are to reveal the underlying problems on the correlations specified in the ANSI N14.5 related to gas leakage rates from a scratch on O-ring surface and from multi-leak paths, to offer a data base to study the evaluation method of the leakage rate and to propose the evaluation method. In this paper, the following insights were obtained and clarified: 1. If a characteristic value of a leak path is defined as D 4 /a ('D' is the diameter and 'a' is the length), a scratch on the O-ring surface can be evaluated as a circular tube. 2. It is proper to use the width of O-ring groove on the flange as the leak path length for elastomer O-rings. 3. Gas leakage rates from multi leak paths of the transportation cask can be evaluated in the same manner as a single leak path if an effective D4/a is introduced. (author)

Release of radionuclides following severe accident in interim storage facility. Source term determination

International Nuclear Information System (INIS)

Morandi, S.; Mariani, M.; Giacobbo, F.; Covini, R.

2006-01-01

Among the severe accidents that can cause the release of radionuclides from an interim storage facility, with a consequent relevant radiological impact on the population, there is the impact of an aircraft on the facility. In this work, a safety assessment analysis for the case of an aircraft crash into an interim storage facility is tackled. To this aim a methodology, based upon DOE, IAEA and NUREG standard procedures and upon conservative yet realistic hypothesis, has been developed in order to evaluate the total radioactivity, source term, released to the biosphere in consequence of the impact, without recurring to the use of complicated numerical codes. The procedure consists in the identification of the accidental scenarios, in the evaluation of the consequent damage to the building structures and to the waste packages and in the determination of the total release of radionuclides through the building-atmosphere interface. The methodology here developed has been applied to the case of an aircraft crash into an interim storage facility currently under design. Results show that in case of perforation followed by a fire incident the total released activity would be greater of some orders of magnitude with respect to the case of mere perforation. (author)

Release consequence analysis for a hypothetical geologic radioactive waste repository in salt

International Nuclear Information System (INIS)

1979-08-01

One subtask conducted under the INFCE program is to evaluate and compare the health and safety impacts of different fuel cycles in which all radioactive wastes (except those from mining and milling) are placed in a geologic repository in salt. To achieve this objective, INFCE Working Group 7 examined the radiologic dose to humans from geologic repositories containing waste arisings as defined for seven reference fuel cycles. This report examines the release consequences for a generic waste repository in bedded salt. The top of the salt formation and the top of the repository are assumed to be 250 and 600 m, respectively, below the surface. The hydrogeologic structure above the salt consists of two aquifers and two aquitards. The aquifers connect to a river 6.2 km from the repository. The regional gradient to the river is 1 m/km in all aquifers. Hydrologic, transport, and dose models were used to model two release scenarios for each fuel cycle, one without a major disturbance and one in which a major geologic perturbation breached the repository immediately after it was sealed. The purpose of the modeling was to predict the rate of transport of radioactive contaminants from the repository through the geosphere to the biosphere, and to determine the potential dose to humans. Of the many radionuclides in the waste, only 129 I and 226 Ra arrived at the river in sufficient concentrations for a measurable dose calculation. Radionuclide concentrations in the ground water pose no threat to man because the ground water is a concentrated brine and it is diluted by a factor of 10 6 to 10 7 upon entering the river

Order of the 10 january 2003 authorizing the national agency for the radioactive wastes management to follow the gaseous and liquid effluents release for the exploitation of the radioactive wastes storage center of the Manche

International Nuclear Information System (INIS)

2003-01-01

This document, took out from the Official Journal, is the law text relative to the order of the 10 january 2003 authorizing the national agency for the radioactive wastes management to follow the gaseous and liquid effluents release for the exploitation of the radioactive wastes storage center of the Manche. (A.L.B.)

Radioactive contamination of recycled metals

International Nuclear Information System (INIS)

Lubenau, J.O.; Cool, D.A.; Yusko, J.G.

1996-01-01

Radioactive sources commingled with metal scrap have become a major problem for the metals recycling industry worldwide. Worldwide there have been 38 confirmed reports of radioactive sources accidentally smelted with recycled metal. In some instances, contaminated metal products were subsequently distributed. The metal mills, their products and byproducts from the metal making process such as slags, crosses and dusts from furnaces can become contaminated. In the U.S., imported ferrous metal products such as reinforcement bars, pipe flanges, table legs and fencing components have been found contaminated with taco. U.S. steel mills have unintentionally smelted radioactive sources on 16 occasions. The resulting cost for decontamination waste disposal and temporary closure of the steel mill is typically USD 10,000,000 and has been as much as USD 23,000,000. Other metal recycling industries that have been affected by this problem include aluminum, copper, zinc, gold, lead and vanadium. (author)

Role of radon in comparisons of effects of radioactivity releases from nuclear power, coal burning and phosphate mining

Energy Technology Data Exchange (ETDEWEB)

Cohen, B L [Argonne National Lab., IL (USA); Pittsburgh Univ., PA (USA))

1981-01-01

It is shown that radon emissions are the predominant source of radiation exposure from nuclear power, coal burning or phosphate mining. For very long time spans, erosion of the continents must be considered, and in this perspective bringing uranium to the earth's surface has no effect since it would eventually reach the surface anyhow, so coal burning and phosphate mining have no net effect; however, nuclear power saves lives by removing the radon source, the net effect ultimately being a saving of 350 lives/GWe-yr. If only effects over 500 yr are considered, lives saved by removal of uranium in mining exceed lives lost due to radon emissions from the nuclear industry under regulations now being instituted, and the net fatalities per GWe-yr caused by all radioactivity releases are 0.017 for nuclear vs 0.045 for coal burning; the effects of radioactivity releases by 1-yr of present annual operations are 10 times larger for phosphate mining than for coal burning.

Modelling and assessment of accidental oil release from damaged subsea pipelines.

Science.gov (United States)

Li, Xinhong; Chen, Guoming; Zhu, Hongwei

2017-10-15

This paper develops a 3D, transient, mathematical model to estimate the oil release rate and simulate the oil dispersion behavior. The Euler-Euler method is used to estimate the subsea oil release rate, while the Eulerian-Lagrangian method is employed to track the migration trajectory of oil droplets. This model accounts for the quantitative effect of backpressure and hole size on oil release rate, and the influence of oil release rate, oil density, current speed, water depth and leakage position on oil migration is also investigated in this paper. Eventually, the results, e.g. transient release rate of oil, the rise time of oil and dispersion distance are determined by above-mentioned model, and the oil release and dispersion behavior under different scenarios is revealed. Essentially, the assessment results could provide a useful guidance for detection of leakage positon and placement of oil containment boom. Copyright © 2017 Elsevier Ltd. All rights reserved.

Manufacturing and test of a low cost polypropylene bag to reduce the radioactive gas released by a radiopharmaceutical production facility

Energy Technology Data Exchange (ETDEWEB)

Tavares, Jose Carlos Freitas; Lacerda, Marco Aurelio de Sousa, E-mail: jcft@cdtn.b, E-mail: masl@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (SEPRA/ CDTN/CNEN-MG) Belo Horizonte, MG (Brazil). Servico de Protecao Radiologica; Nascimento, Leonardo Tafas Constantino do; Silva, Juliana Batista da, E-mail: ltcn@cdtn.b, E-mail: silvajb@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (SECPRA/ CDTN/CNEN-MG) Belo Horizonte, MG (Brazil). Secao de Producao de Radiofarmacos

2011-07-01

The main objective of this work was to evaluate the efficiency of a plastic gas storage bag to reduce the radioactive gas released by the chimney of a radiopharmaceutical production facility during the 2-[{sup 18}F]fluoro-2- deoxy-D-glucose ({sup 18}FDG) synthesis. The studied facility was the Development Centre of Nuclear Technology (CDTN/CNEN) in Belo Horizonte, Brazil. The bag was manufactured utilizing foils of polypropylene of 360 x 550 x 0.16 mm and disposable components of the cassette of the synthesizer. Two synthesis of {sup 18}FDG were done using the same hot cell and synthesizer to evaluate the efficiency of the bag. The manufactured bag was put in the gas exit of the synthesizer and the activity reported by the online radiation monitoring system in the first synthesis. These results were compared to the activity released in a synthesis performed without the bag. We observed when the bag was used the amount released was about 0.2% in 270 minutes. The second synthesis was performed without the bag, about 7,1% of the input activity was released by the exhaust of the facility in the same time interval. The bag presented a very good efficiency in the reducing of the radioactive gas released by the chimney of the radiopharmaceutical production facility. (author)

Manufacturing and test of a low cost polypropylene bag to reduce the radioactive gas released by a radiopharmaceutical production facility

International Nuclear Information System (INIS)

Tavares, Jose Carlos Freitas; Lacerda, Marco Aurelio de Sousa; Nascimento, Leonardo Tafas Constantino do; Silva, Juliana Batista da

2011-01-01

The main objective of this work was to evaluate the efficiency of a plastic gas storage bag to reduce the radioactive gas released by the chimney of a radiopharmaceutical production facility during the 2-[ 18 F]fluoro-2- deoxy-D-glucose ( 18 FDG) synthesis. The studied facility was the Development Centre of Nuclear Technology (CDTN/CNEN) in Belo Horizonte, Brazil. The bag was manufactured utilizing foils of polypropylene of 360 x 550 x 0.16 mm and disposable components of the cassette of the synthesizer. Two synthesis of 18 FDG were done using the same hot cell and synthesizer to evaluate the efficiency of the bag. The manufactured bag was put in the gas exit of the synthesizer and the activity reported by the online radiation monitoring system in the first synthesis. These results were compared to the activity released in a synthesis performed without the bag. We observed when the bag was used the amount released was about 0.2% in 270 minutes. The second synthesis was performed without the bag, about 7,1% of the input activity was released by the exhaust of the facility in the same time interval. The bag presented a very good efficiency in the reducing of the radioactive gas released by the chimney of the radiopharmaceutical production facility. (author)

Ensemble-based simultaneous emission estimates and improved forecast of radioactive pollution from nuclear power plant accidents: application to ETEX tracer experiment

International Nuclear Information System (INIS)

Zhang, X.L.; Li, Q.B.; Su, G.F.; Yuan, M.Q.

2015-01-01

The accidental release of radioactive materials from nuclear power plant leads to radioactive pollution. We apply an augmented ensemble Kalman filter (EnKF) with a chemical transport model to jointly estimate the emissions of Perfluoromethylcyclohexane (PMCH), a tracer substitute for radionuclides, from a point source during the European Tracer Experiment, and to improve the forecast of its dispersion downwind. We perturb wind fields to account for meteorological uncertainties. We expand the state vector of PMCH concentrations through continuously adding an a priori emission rate for each succeeding assimilation cycle. We adopt a time-correlated red noise to simulate the temporal emission fluctuation. The improved EnKF system rapidly updates (and reduces) the excessively large initial first-guess emissions, thereby significantly improves subsequent forecasts (r = 0.83, p < 0.001). It retrieves 94% of the total PMCH released and substantially reduces transport error (>80% average reduction of the normalized mean square error). - Highlights: • EnKF is augmented for estimating emission and improving dispersion forecast. • The improved system retrieves 94% of the actual total tracer release in ETEX. • The system substantially improves the 3-h forecast of the tracer dispersion. • The method is robust and insensitive to the first-guess emissions. • The meteorological uncertainties exert strong influence on the performance

Diagnosis and treatment of radioactive poisoning. Proceedings of the scientific meeting on the diagnosis and treatment of radioactive poisoning

International Nuclear Information System (INIS)

1963-01-01

The increasing use of atomic energy generated by nuclear fission is necessarily accompanied by the production of large quantities of radioactive isotopes. This, together with the growing use of radioactive materials in many fields, has given added importance to practical considerations of how best to deal with accidents - should they occur - involving radioactive contamination of individuals. Such considerations require knowledge of the metabolic behaviour of various radionuclides in man and of methods of increasing their elimination from the body. Information of this type is limited, and it is therefore essential to make maximum use of those data which, are available. Analyses of earlier accidents are one important source of such data; another is experience gained from the medical administration of radioisotopes for therapeutic or diagnostic purposes. The World Health Organization and the International Atomic Energy Agency jointly sponsored a scientific meeting on the Diagnosis and Treatment of Radioactive Poisoning, in Vienna from 15 to 18 October 1962. The aim of the meeting, which followed an earlier one (The Diagnosis and Treatment of Acute Radiation Injury) sponsored by the two organizations in 1960 on another aspect of radiation protection, was to review the present state of knowledge on the diagnosis, evaluation and treatment of persons who have accidentally incorporated radioactive materials. It brought together three groups of persons: those experienced in various methods of diagnosis and treatment of patients who have been exposed (occupationally or accidentally) to radioactive material; those engaged in the clinical administration of radionuclides and the study of their behaviour in man; and those working on related problems with experimental animals. In view of the great interest of many of the topics discussed at the meeting, it was felt desirable that the information presented in the papers and brought out in the ensuing discussions should be

Modelling of the tritium dispersion from postulated accidental release of nuclear power plants; Modelagem da dispersao de tritio a partir de liberacoes acidentais postuladas de centrais nucleares

Energy Technology Data Exchange (ETDEWEB)

Soares, Abner Duarte; Simoes Filho, Francisco Fernando Lamego; Cunha, Tatiana Santos da [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Aguiar, Andre Silva de; Lapa, Celso Marcelo Franklin, E-mail: asoares@cnen.gov.b, E-mail: flamego@ien.gov.b, E-mail: lapa@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2011-07-01

This study has the aim to assess the impact of accidental release of tritium postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models to simulation of tritium dispersion caused by an accident in a Candu reactor located in the ongoing Angra 3 site. The Candu reactor is one that uses heavy water (D{sub 2}O) as moderator and coolant of the core. It was postulated, then, the LOCA accident (without fusion), where was lost 66 m3 of soda almost instantaneously. This inventory contained 35 P Bq and was released a load of 9.7 TBq/s in liquid form near the Itaorna beach, Angra dos Reis - RJ. The models mentioned above were applied in two scenarios (plant stopped or operating) and showed a tritium plume with specific activities larger than the reference level for seawater (1.1 MBq/m{sup 3}) during the first 14 days after the accident. (author)

Spatiotemporal distribution of radioactive cesium released from Fukushima Daiichi Nuclear Power Station in the sediment of Tokyo Bay, Japan

International Nuclear Information System (INIS)

Nakagawa, Ryota; Ishida, Masanobu; Baba, Daisuke; Tanimoto, Satomi; Okamoto, Yuichi; Yamazaki, Hideo

2013-01-01

The spatial and temporal distribution of "1"3"4Cs and "1"3"7Cs released from Fukushima Daiichi Nuclear Power Station in the Tokyo Bay sediments were investigated. The total radioactivity of "1"3"4Cs and "1"3"7Cs detected in the Tokyo Bay sediment ranged from 240 to 870 Bq/kg-dry in the estuary of Arakawa River, but the activities detected in other sites were about 90 Bq/kg-dry or less. These results suggested that radioactive cesium, which precipitated to the ground, was carried to the river along with clay particles by rainfall and transported to the estuary. The vertical distribution of radioactive cesium showed that it invaded deeper than estimated based on the accumulation rate of the sediment. It was described that the vertical distribution of radioactive cesium was affected by physical mixing of sediments by tidal current, flood, and bioturbation of benthos. (author)

Uncertainty analysis in an accidental situation. Radionuclide transfer in environment and assessment of human exposure by food

International Nuclear Information System (INIS)

Sy, Mouhamadou Moustapha

2016-01-01

Major nuclear accidents of Chernobyl (April, 1986) and Fukushima (March, 2011) have led to a huge environmental contamination with important amounts of radionuclides released in the atmosphere. Risk assessment, in case of nuclear emergency, is confronted to uncertainties on the transfer of radioactive substances in terrestrial ecosystems and to human population through the food chain, which could affect the reliability of decisions. The extent of the repercussions of Chernobyl and Fukushima accidents highlighted the difficulty of managing the consequences of such disasters and specifically to accommodate the different sources of uncertainty within decision-making processes. The objective of this research project is to develop a methodology to take into account uncertainties within environmental and food risk assessment models in order to improve decision support tools used for accidental situations. In this regard, different hierarchical Bayesian models aiming at capturing, within a unique modelling framework, uncertainty and variability about radioecological parameters of great important for accidental situation (dry and wet interception fractions and weathering loss parameter) were developed. Models parameters were estimated by Bayesian inference applied on databases obtained by an extended literature review. The impact on the risk assessment models of uncertainty and variability about these radioecological parameters was then assessed by stochastic simulations and sensitivity analyses applied on two case-studies: a hypothetical accident simulating a standardized deposition of radionuclides and the accident of Fukushima nuclear power plant. The works developed in this project contribute to enhance knowledge on key processes governing environmental transfer of radionuclides and to improve the parameterization of the radioecological risk assessment models with respect to the research lines outlined by the scientific community in radioecology. (author)

ORNL radioactive waste operations

International Nuclear Information System (INIS)

Sease, J.D.; King, E.M.; Coobs, J.H.; Row, T.H.

1982-01-01

Since its beginning in 1943, ORNL has generated large amounts of solid, liquid, and gaseous radioactive waste material as a by-product of the basic research and development work carried out at the laboratory. The waste system at ORNL has been continually modified and updated to keep pace with the changing release requirements for radioactive wastes. Major upgrading projects are currently in progress. The operating record of ORNL waste operation has been excellent over many years. Recent surveillance of radioactivity in the Oak Ridge environs indicates that atmospheric concentrations of radioactivity were not significantly different from other areas in East Tennesseee. Concentrations of radioactivity in the Clinch River and in fish collected from the river were less than 4% of the permissible concentration and intake guides for individuals in the offsite environment. While some radioactivity was released to the environment from plant operations, the concentrations in all of the media sampled were well below established standards

A model to assess exposure from releases of radioactivity into the seas of northern Europe

International Nuclear Information System (INIS)

Clark, M.J.; Webb, G.A.M.

1981-01-01

A regional marine model is described which can be used to estimate the exposure of populations as a result of the discharge of radioactive effluents into the coastal waters of northern Europe. The model simulates the dispersion of radionuclides in marine waters, their interaction with marine sediments and the concentration mechanisms occurring in seafoods. A local/regional interface is included whereby releases are assumed to first enter a local marine compartment before widespread dispersion in coastal waters. Depletion mechanisms operate within both the local and regional environments influencing the fraction of radionuclide release which contributes to collective exposure. In general, results of the regional model are expressed as collective intakes of activity from ingestion of marine seafoods. These quantities can be converted into collective doses per unit discharge, given a knowledge of local depletion factors and the dose per unit intake of radionuclides. Results for caesium-137 and plutonium-239 released into United Kingdom coastal waters are discussed. (author)

Influence of the conditional release of the materials with very low level of radioactivity on the environment - 59132

International Nuclear Information System (INIS)

Prvakova, Slavka; Mrskova, Adela; Pritrsky, Jozef

2012-01-01

Significant amount of solid materials (metals, non-metals, building structures) that could be contaminated or activated is produced during operation and especially decommissioning of nuclear power plants. Considerable fraction of these materials has level of radioactivity close to the radiological limits allowing its safe release into the environment thereby could be potentially recycled within the special constructions, as for example tunnels, roads or bridges. If the requirements of legislation on the radiological limits for handling such material and long-term safety of the constructions are met, contaminated material can be incorporated in the form of recycled concrete, remelted steel, etc. The paper presents implementation of the IAEA and EC recommendations into the form of detailed analytical approaches with the aim to develop integrated scenarios and to analyse long-term influence of the conditional release of the material with very low level of radioactivity on the environment. Further, an estimation of the key input parameters characteristic for the specific conditions of Slovak case in order to fulfil the radiological limits according to the Slovak legislation is included. Analysed integrated scenarios represent surface or underground civil construction with radionuclides released directly into the geosphere and transported by a groundwater flow to the biosphere. The migration of radionuclides is modelled in the near-surface conditions with the advection as a dominant transport mechanism. Computer code GoldSim is used to evaluate the long-term safety assessment of the conditionally released material on the environment. (authors)

Acute Renal Failure following Accidental Potassium Bromate ...

African Journals Online (AJOL)

Accidental poisoning is common in children. Potassium bromate is a commonly used additive and raising agent in many edibles particularly bread, a staple food worldwide, yet its accidental poisoning has hitherto, not been documented in Nigeria. We report an unusual case of acute renal failure following accidental ...

Signos Vitales de los CDC–Prevención de muertes por accidentes cerebrovasculares (Preventing Stroke Deaths)

Centers for Disease Control (CDC) Podcasts

2017-09-06

Este podcast se basa en la edición de septiembre del 2017 del informe Signos Vitales de los CDC. Cada año, más de 140 000 personas mueren y muchos sobrevivientes quedan con discapacidades. El ochenta por ciento de los accidentes cerebrovasculares son prevenibles. Conozca los signos de un accidente cerebrovascular y sepa cómo prevenirlo.  Created: 9/6/2017 by Centers for Disease Control and Prevention (CDC).   Date Released: 9/6/2017.

Development of an air flow calorimeter prototype for the measurement of thermal power released by large radioactive waste packages.

Science.gov (United States)

Razouk, R; Beaumont, O; Failleau, G; Hay, B; Plumeri, S

2018-03-01

The estimation and control of the thermal power released by the radioactive waste packages are a key parameter in the management of radioactive waste geological repository sites. In the framework of the European project "Metrology for decommissioning nuclear facilities," the French National Agency of Radioactive Waste Management (ANDRA) collaborates with Laboratoire National de Métrologie et D'essais in order to measure the thermal power up to 500 W of typical real size radioactive waste packages (of at least 0.175 m 3 ) with an uncertainty better than 5% by using a measurement method traceable to the international system of units. One of the selected metrological approaches is based on the principles of air flow calorimetry. This paper describes in detail the development of the air flow calorimeter prototype as well as the design of a radioactive waste package simulator used for its calibration. Results obtained from the calibration of the calorimeter and from the determination of thermal powers are presented here with an investigation of the measurement uncertainties.

Development of an air flow calorimeter prototype for the measurement of thermal power released by large radioactive waste packages

Science.gov (United States)

Razouk, R.; Beaumont, O.; Failleau, G.; Hay, B.; Plumeri, S.

2018-03-01

The estimation and control of the thermal power released by the radioactive waste packages are a key parameter in the management of radioactive waste geological repository sites. In the framework of the European project "Metrology for decommissioning nuclear facilities," the French National Agency of Radioactive Waste Management (ANDRA) collaborates with Laboratoire National de Métrologie et D'essais in order to measure the thermal power up to 500 W of typical real size radioactive waste packages (of at least 0.175 m3) with an uncertainty better than 5% by using a measurement method traceable to the international system of units. One of the selected metrological approaches is based on the principles of air flow calorimetry. This paper describes in detail the development of the air flow calorimeter prototype as well as the design of a radioactive waste package simulator used for its calibration. Results obtained from the calibration of the calorimeter and from the determination of thermal powers are presented here with an investigation of the measurement uncertainties.

Model to predict radiological consequences of transportation accidents involving dispersal of radioactive material in urban areas

International Nuclear Information System (INIS)

Taylor, J.M.; Daniel, S.L.

1978-01-01

The analysis of accidental releases of radioactive material which may result from transportation accidents in high-density urban areas is influenced by several urban characteristics which make computer simulation the calculational method of choice. These urban features fall into four categories. Each of these categories contains time- and location-dependent parameters which must be coupled to the actual time and location of the release in the calculation of the anticipated radiological consequences. Due to the large number of dependent parameters a computer model, METRAN, has been developed to quantify these radiological consequences. Rather than attempt to describe an urban area as a single entity, a specific urban area is subdivided into a set of cells of fixed size to permit more detailed characterization. Initially, the study area is subdivided into a set of 2-dimensional cells. A uniform set of time-dependent physical characteristics which describe the land use, population distribution, traffic density, etc., within that cell are then computed from various data sources. The METRAN code incorporates several details of urban areas. A principal limitation of the analysis is the limited availability of accurate information to use as input data. Although the code was originally developed to analyze dispersal of radioactive material, it is currently being evaluated for use in analyzing the effects of dispersal of other hazardous materials in both urban and rural areas

Decision making on population protection in a large-scale radioactive contamination following a nuclear reactor accident

International Nuclear Information System (INIS)

Konstantinov, Yu. O.

1993-01-01

Since the first years of development of nuclear power the most serious attention has been given to the planning of measures of population protection in the event of a radioactive release to atmosphere from a nuclear reactor. In the 60s 'Criteria for urgent decision making in the event of an accidental radioactive release into the environment' were developed in the USSR. When substantiating numerical values of potential radiation doses reasoning the implementation of countermeasures, specific conditions of emergency situations, characteristics of countermeasures and the real possibilities of timely dosimetric estimation of the situation were considered. The 'Criteria' were designed for urgent decision making at an early stage, in the first hours and days following the emergency. After the start of the Chernobyl accident on April 26, 1986, decisions on measures of protection of the population living in proximity to the site of the accident, including relocation of residents of the town of Pripyat on May 27, 1986, were taken on the basis of this document, as well as decisions for iodine prophylaxis and for relocation of other settlements within the 30 km zone. The decisions were taken by the result of the estimation prediction of the radiation situation which showed a possibility of an excess of criteria levels by external gamma radiation and by inhalation of radioiodine

Analytics of Radioactive Materials Released in the Fukushima Daiichi Nuclear Accident

Energy Technology Data Exchange (ETDEWEB)

Egarievwe, Stephen U. [Nuclear Engineering and Radiological Science Center, Alabama A and M University, Huntsville, AL (United States); Nuclear Engineering Department, University of Tennessee, Knoxville, TN (United States); Coble, Jamie B.; Miller, Laurence F. [Nuclear Engineering Department, University of Tennessee, Knoxville, TN (United States)

2015-07-01

The 2011 Fukushima Daiichi nuclear accident in Japan resulted in the release of radioactive materials into the atmosphere, the nearby sea, and the surrounding land. Following the accident, several meteorological models were used to predict the transport of the radioactive materials to other continents such as North America and Europe. Also of high importance is the dispersion of radioactive materials locally and within Japan. Based on the International Atomic Energy Agency (IAEA) Convention on Early Notification of a nuclear accident, several radiological data sets were collected on the accident by the Japanese authorities. Among the radioactive materials monitored, are I-131 and Cs-137 which form the major contributions to the contamination of drinking water. The radiation dose in the atmosphere was also measured. It is impractical to measure contamination and radiation dose in every place of interest. Therefore, modeling helps to predict contamination and radiation dose. Some modeling studies that have been reported in the literature include the simulation of transport and deposition of I-131 and Cs-137 from the accident, Cs-137 deposition and contamination of Japanese soils, and preliminary estimates of I-131 and Cs-137 discharged from the plant into the atmosphere. In this paper, we present statistical analytics of I-131 and Cs-137 with the goal of predicting gamma dose from the Fukushima Daiichi nuclear accident. The data sets used in our study were collected from the IAEA Fukushima Monitoring Database. As part of this study, we investigated several regression models to find the best algorithm for modeling the gamma dose. The modeling techniques used in our study include linear regression, principal component regression (PCR), partial least square (PLS) regression, and ridge regression. Our preliminary results on the first set of data showed that the linear regression model with one variable was the best with a root mean square error of 0.0133 μSv/h, compared

Analytics of Radioactive Materials Released in the Fukushima Daiichi Nuclear Accident

International Nuclear Information System (INIS)

Egarievwe, Stephen U.; Coble, Jamie B.; Miller, Laurence F.

2015-01-01

The 2011 Fukushima Daiichi nuclear accident in Japan resulted in the release of radioactive materials into the atmosphere, the nearby sea, and the surrounding land. Following the accident, several meteorological models were used to predict the transport of the radioactive materials to other continents such as North America and Europe. Also of high importance is the dispersion of radioactive materials locally and within Japan. Based on the International Atomic Energy Agency (IAEA) Convention on Early Notification of a nuclear accident, several radiological data sets were collected on the accident by the Japanese authorities. Among the radioactive materials monitored, are I-131 and Cs-137 which form the major contributions to the contamination of drinking water. The radiation dose in the atmosphere was also measured. It is impractical to measure contamination and radiation dose in every place of interest. Therefore, modeling helps to predict contamination and radiation dose. Some modeling studies that have been reported in the literature include the simulation of transport and deposition of I-131 and Cs-137 from the accident, Cs-137 deposition and contamination of Japanese soils, and preliminary estimates of I-131 and Cs-137 discharged from the plant into the atmosphere. In this paper, we present statistical analytics of I-131 and Cs-137 with the goal of predicting gamma dose from the Fukushima Daiichi nuclear accident. The data sets used in our study were collected from the IAEA Fukushima Monitoring Database. As part of this study, we investigated several regression models to find the best algorithm for modeling the gamma dose. The modeling techniques used in our study include linear regression, principal component regression (PCR), partial least square (PLS) regression, and ridge regression. Our preliminary results on the first set of data showed that the linear regression model with one variable was the best with a root mean square error of 0.0133 μSv/h, compared

The impact of ambient dose rate measuring network and precipitation radar system for detection of environmental radioactivity released by accident

International Nuclear Information System (INIS)

Bleher, M; Stoehlker, U.

2003-01-01

For the surveillance of environmental radioactivity, the German measuring network of BfS consists of more than 2000 stations where the ambient gamma dose rate is continuously measured. This network is a helpful tool to detect and localise enhanced environmental contamination from artificial radionuclides. The threshold for early warning is so low, that already an additional dose rate contribution of 0,07 μGy/h is detectable. However, this threshold is frequently exceeded due to precipitation events caused by washout of natural activity in air. Therefore, the precipitation radar system of the German Weather Service provides valuable information on the problem, whether the increase of the ambient dose rate is due to natural or man-made events. In case of an accidental release, the data of this radar system show small area precipitation events and potential local hot spots not detected by the measuring network. For the phase of cloud passage, the ambient dose rate measuring network provides a reliable database for the evaluation of the current situation and its further development. It is possible to compare measured data for dose rate with derived intervention levels for countermeasures like ''sheltering''. Thus, critical regions can be identified and it is possible to verify implemented countermeasures. During and after this phase of cloud passage the measured data of the monitoring network help to adapt the results of the national decision support systems PARK and RODOS. Therefore, it is necessary to derive the actual additional contribution to the ambient dose rate. Map representations of measured dose rate are rapidly available and helpful to optimise measurement strategies of mobile systems and collection strategies for samples of agricultural products. (orig.)

Radioactive kryptonates in the analysis of environmental samples

International Nuclear Information System (INIS)

Tolgyessy, J.

1986-01-01

The term ''radioactive Kryptonates'' is used for substances into which atoms or ions of the radioactive nuclide 85 Kr are incorporated. The basis of the use of radioactive Kryptonates in analytical chemistry is that during a chemical reaction the crystalline lattice of the kryptonated carrier is destroyed, the carrier consumed, and the radioactive krypton released (radio-release method). Analysis can be made with a calibration curve or by comparison with a standard. Radio-release methods with the aid of radioactive Kryptonates as analytical reagents are very useful for the analysis of environmental samples, e.g. for the determination of air pollutants (ozone, sulphur dioxide, fluorine, hydrogen fluoride, mercury); and water pollutants (oxygen, dichromate, vanadium, hydrochloric acid, sulphur dioxide). (author)

Proposed new regulations for the limitation of releases of radioactive substances from nuclear power stations with light water reactors

International Nuclear Information System (INIS)

1975-07-01

In this publication the Swedish National Institute of Radiation Protection presents a proposed version of new regulations concerning the way in which the release of radioactive substances from nuclear power stations is to be limited. The regulations come into force on 1st January 1976. (Auth.)

Puff-plume atmospheric deposition model for use at SRP in emergency-response situations

International Nuclear Information System (INIS)

Garrett, A.J.; Murphy, C.E. Jr.

1981-05-01

An atmospheric transport and diffusion model developed for real-time calculation of the location and concentration of toxic or radioactive materials during an accidental release was improved by including deposition calculations

Natural radioactivity releases from lignite power plants in Southwestern Anatolia

International Nuclear Information System (INIS)

Yaprak, G.; Guer, F.; Cam, F.; Candan, O.

2006-01-01

The Mugla basin is one of the most productive lignite basins in Southwestern Anatolia, Turkey. Mining activities started in 1979 and total reserves were estimated during exploration at 767.5 million tonnes. Total mean annual lignite production of the Mugla basin is estimated at about 10 million tonnes per year. Most of the lignite production supplies three thermal power plants (Yatagan 630 MW, Yenikoey 420 MW, Kemerkoey 630 MW) with a total capacity of 1680 MW. It is well known that the lignite contains naturally occurring primordial radionuclides arising from the uranium and thorium series as well as from 4 0K. Lignite burning is, therefore, one of the sources of technologically enhanced exposure to humans from natural radionuclides. The investigation reported here deals with the determination of the 2 26Ra, 2 32Th and 4 0K concentrations in the lignite feeding 3 thermal power plants in Mugla region and in the product ash. Samples of lignite feeding the power plants and fly and bottom ashes produced in the same power plants were collected over a period of 1 year and therefore systematic sampling allowed for the determination of mean representative values for the natural radioactivity content of above materials and also estimation of the radioactivity releases to the environment. Furthermore, grid soil sampling within 10-15 km around the power plants allowed for the mapping of the surface soil activity of natural radionuclides. Dosimetric calculations from terrestrial gamma radiation for the population living around the power plants were performed based on the guidance of UNSCEAR 2000 report

Compilation of data on the release of radioactive substances in the vent air of nuclear power plants in the Federal Republic of Germany in 1975

International Nuclear Information System (INIS)

Winkelmann, I.; Endrulat, H.J.; Haubelt, R.; Westpfahl, U.

1976-04-01

The present compilation of data on the release of radioactive substances in the vent air of nuclear power plants in the FRG is a continuation of a report series on aerosol filter and iodine filter samples from the exhaust air control systems of the nuclear power plants Gundremmingen, Obrigheim, Wuergassen, Stade, Lingen and Biblis A. The reports have been issued by the Federal public health office since 1972. This report is supplemented by annual release values on radioactive noble gases, on short- and long-lived aerosols, and on gaseous 131 I, supplied by the individual nuclear power plants as in previous years on uniform questionnaires. Data on the release of tritium are also available from some nuclear power plants. (orig.) [de

Assessment of potential risk of environmental radioactive contamination in northern Europe from terrestrial nuclear units in north-west Russia

International Nuclear Information System (INIS)

Lisovsky, I.; Baklanov, A.; Jacovlev, V.; Prutskov, V.; Bergman, R.

1999-05-01

This Technical Report, being part of the INTAS project 96-1802, constitutes a comprehensive presentation - covering basic results from separate contributions as specified below - of work performed during the first period (February 1998- February 1999). The aim of the INTAS project 96-1802: 'Assessment of potential risk of environmental radioactive contamination in northern Europe from terrestrial nuclear units in north-west Russia' is to assess the potential risk of environmental radioactive contamination from nuclear units in north-west Russia and resulting impacts on population and terrestrial ecosystems in the north. The work focuses mainly on airborne radioactive contamination, but some case studies also deal with accidental leakage from terrestrial nuclear sites to soil and coastal waters. The present material comprises in more detail the contributions from participants no.4 and no.5 based on the four internal reports referred to below: (1) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in north-west Russia: 'Determination of the list of typical sources of danger emergency radioactive releases in an environment in connection with military activity in the North of Russia.' Technical report no.1 of the team no.5. St.-Petersburg State Technical University, St.-Petersburg. July 1998. 43 p.; (2) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in North-west Russia: 'Analysis and description of source-term characteristics for accident linked with airborne radioactive releases from Kola Nuclear Power Plant. Establishing a network facility at INEP for communication among the INTAS Project participants.' Technical report no.1 of the team no.4. Kola Science Centre, Apatity. August 1998. 56 p.; (3) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in

Assessment of potential risk of environmental radioactive contamination in northern Europe from terrestrial nuclear units in north-west Russia

Energy Technology Data Exchange (ETDEWEB)

Lisovsky, I. [St. Petersburg State Technical Univ. (Russian Federation); Baklanov, A. [Inst. of the Northern Ecology Problems (INEP) (Russian Federation); Jacovlev, V. [St. Petersburg State Technical Univ. (Russian Federation); Prutskov, V. [Ministry of Defence (Russian Federation). First Central Research Inst. of Naval Shipbuilding; Tarasov, I. [Ministry of Defence (Russian Federation). 23 State Marine Project Inst.; Blecher, A. [State Unitary Enterprise (Russian Federation). Research Inst. of Industrial and Marine Medicine; Zvonariev, B.; Kuchin, N.; Rubanov, S.; Sergeiev, I. [State Scientific Centre (Russian Federation). Central Research Inst. of A. Krylov; Morozov, S.; Koshkin, V.; Fedorenko, Yu.; Rigina, O. [Inst. of the Northern Ecology Problems (INEP) (Russian Federation); Bergman, R. [ed.] [Defence Research Establishment, Umeaa (Sweden). Div. of NBC Defence

1999-05-01

This Technical Report, being part of the INTAS project 96-1802, constitutes a comprehensive presentation - covering basic results from separate contributions as specified below - of work performed during the first period (February 1998- February 1999). The aim of the INTAS project 96-1802: `Assessment of potential risk of environmental radioactive contamination in northern Europe from terrestrial nuclear units in north-west Russia` is to assess the potential risk of environmental radioactive contamination from nuclear units in north-west Russia and resulting impacts on population and terrestrial ecosystems in the north. The work focuses mainly on airborne radioactive contamination, but some case studies also deal with accidental leakage from terrestrial nuclear sites to soil and coastal waters. The present material comprises in more detail the contributions from participants no.4 and no.5 based on the four internal reports referred to below: (1) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in north-west Russia: `Determination of the list of typical sources of danger emergency radioactive releases in an environment in connection with military activity in the North of Russia.` Technical report no.1 of the team no.5. St.-Petersburg State Technical University, St.-Petersburg. July 1998. 43 p.; (2) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in North-west Russia: `Analysis and description of source-term characteristics for accident linked with airborne radioactive releases from Kola Nuclear Power Plant. Establishing a network facility at INEP for communication among the INTAS Project participants.` Technical report no.1 of the team no.4. Kola Science Centre, Apatity. August 1998. 56 p.; (3) Assessment of potential risk of environmental radioactive contamination in Northern Europe from terrestrial nuclear units in

Environment assessing for airborne radioactive particulate release-introduction of methods in IAEA safety report series No.19

International Nuclear Information System (INIS)

Meng, Dan; Yang, Liu; Shen, Fu; Yang, Yi; Ma, Yinghao; Ma, Tao; Zhang, Zhilong; Fu, Cuiming

2016-01-01

Airborne radioactive particulate in many important nuclear facilities (particularly nuclear power plants) will have a strong impact on the relative public dose if they are released into the corresponding environment traversing the stack or vents. The radiation protection researchers have regarded the relative environment assessing and estimation of public doses. And the model of assessing impact of discharges radioactive substance to the environment have been recommended by many international organizations (e.g. IAEA) with the nuclear energy safety and radiation protection. This paper introduced the generic models that were suggested by International Atomic Energy Agency (IAEA), for use in assessing the impact of discharges of radioactive substances to the environment (e.g. IAEA Safety Report Series No.19). The writers of this paper, based on the recommend methods, assessed the discharge limits in some airborne radioactive substances discharging standards. The reasons that IAEA method are introduced are mainly the following considerations: IAEA is one of international organizations with some authorities in the nuclear energy safety and radiation protection; and, more important, the recommend modes are operational methods rather than the methods having little operations such as that have used by some researchers. It is wish that the introduced methods in this paper can be referenced in draft or revise of the standards related to discharges of radioactive substances to the environment

Environment assessing for airborne radioactive particulate release-introduction of methods in IAEA safety report series No.19

Energy Technology Data Exchange (ETDEWEB)

Meng, Dan; Yang, Liu; Shen, Fu; Yang, Yi; Ma, Yinghao; Ma, Tao; Zhang, Zhilong; Fu, Cuiming [China Institute for Radiation Protection, Taiyuan (China)

2016-12-15

Airborne radioactive particulate in many important nuclear facilities (particularly nuclear power plants) will have a strong impact on the relative public dose if they are released into the corresponding environment traversing the stack or vents. The radiation protection researchers have regarded the relative environment assessing and estimation of public doses. And the model of assessing impact of discharges radioactive substance to the environment have been recommended by many international organizations (e.g. IAEA) with the nuclear energy safety and radiation protection. This paper introduced the generic models that were suggested by International Atomic Energy Agency (IAEA), for use in assessing the impact of discharges of radioactive substances to the environment (e.g. IAEA Safety Report Series No.19). The writers of this paper, based on the recommend methods, assessed the discharge limits in some airborne radioactive substances discharging standards. The reasons that IAEA method are introduced are mainly the following considerations: IAEA is one of international organizations with some authorities in the nuclear energy safety and radiation protection; and, more important, the recommend modes are operational methods rather than the methods having little operations such as that have used by some researchers. It is wish that the introduced methods in this paper can be referenced in draft or revise of the standards related to discharges of radioactive substances to the environment.

Radioactive waste management in a fuel reprocessing facility in fiscal 1982

International Nuclear Information System (INIS)

1984-01-01

In the fuel reprocessing facility of the Power Reactor and Nuclear Fuel Development Corporation, radioactive gaseous and liquid waste are released not exceeding the respective permissible levels. Radioactive concentrated solutions are stored at the site. Radioactive solid waste are stored appropriately at the site. In fiscal 1982, the released quantities of radioactive gaseous and liquid waste were both below the permissible levels. The results of radioactive waste management in the fuel reprocessing facility in fiscal 1982 are given in the tables: the released quantities of radioactive gaseous and liquid waste, the produced quantities of radioactive solid waste, and the stored quantities of radioactive concentrated solutions and of radioactive solid waste as of the end of fiscal 1982. (Mori, K.)

A guide to TIRION 4 - a computer code for calculating the consequences of releasing radioactive material to the atmosphere

International Nuclear Information System (INIS)

Fryer, L.S.

1978-12-01

TIRION 4 is the most recent program in a series designed to calculate the consequences of releasing radioactive material to the atmosphere. A brief description of the models used in the program and full details of the various control cards necessary to run TIRION 4 are given. (author)

How are radioactive deposits redistributed among watersheds in post-accidental situations? Lessons learned from the Chernobyl and Fukushima accidents

International Nuclear Information System (INIS)

2016-03-01

As radioactive releases in the atmosphere resulted in heterogeneous deposits on large continental surfaces including forests, farming lands and residential areas, water runoff in contaminated areas governs the downstream redistribution of caesium 134 and 137. Based on several published studies, this report proposes a synthetic overview of the knowledge of radionuclide flows associated to these processes. The quantity of radio-caesium concerned by watershed washouts has been studied, and appeared to be the result of complex hydrologic and erosive processes. Some studies noticed that, in this respect, the comparison between exported flows in Chernobyl and in Fukushima is difficult because the washout of radio-caesium was essentially solid in Fukushima while liquid in Chernobyl. Thus, the strategy applied for the management of aquatic environments is different

Protection and safety functions of different off-gas treatment systems in radioactive waste incineration

International Nuclear Information System (INIS)

Caramelle, D.; Chevalier, G.; Chevalier, G.

1986-01-01

Gaseous effluent cleaning installations are designed to protect workmen and environment and must be efficient enough to guarantee that the amounts of gases and dusts emitted by a furnace operating normally or accidentally are at an acceptable level in the atmosphere on the incinerator site. The process equipments necessary to operations and the monitoring devices must be reliable. The main risk in normal operation is occupational exposure close to the radioactive products accumulation points. The accidental risks are mainly related to an outage of the off-gas cleaning or a tightness failure with radioactive products dissemination resulting from either internal perturbation (filter tear, exhauster failure, ...) or external incident (electricity cut-off, furnace disarrangements, fire or explosion inside the incinerator). In view of these risks, it is interesting to examine the safety and protection functions of different components of off-gas treatment systems

Trace radioactive measurement in foodstuffs using high purity germanium detector

International Nuclear Information System (INIS)

Morco, Ryan P.; Racho, Joseph Michael D.; Castaneda, Soledad S.; Almoneda, Rosalina V.; Pabroa, Preciosa Corazon B.; Sucgang, Raymond J.

2010-01-01

Trace radioactivity in food has been seriously considered sources of potential harm after the accidental radioactive releases in the last decades which led to contamination of the food chain. Countermeasures are being used to reduce the radiological health risk to the population and to ensure that public safety and international commitments are met. Investigation of radioactive traces in foods was carried out by gamma-ray spectrometry. The radionuclides being measured were fission products 1 37Cs and 1 34Cs and naturally occurring 4 0Κ. Gamma-ray measurements were performed using a hybrid gamma-ray counting system with coaxial p-type Tennelec High Purity Germanium (HPGe) detector with relative efficiency of 18.4%. Channels were calibrated to energies using a standard check source with 1 37Cs and 6 0Co present. Self-shielding within samples was taken into account by comparing directly with reference standards of similar matrix and geometry. Efficiencies of radionuclides of interests were accounted in calculating the activity concentrations in the samples. Efficiency calibration curve was generated using an in-house validated program called FINDPEAK, a least-square method that fits a polynomial up to sixth-order of equation. Lower Limits of Detection (LLD) obtained for both 1 37Cs and 1 34Cs ranges from 1-6 Bq/Kg depending on the sample matrix. In the last five years, there have been no foodstuffs analyzed exceeded the local and international regulatory limit of 1000Bq/Kg for the summed activities of 1 37Cs and 1 34Cs. (author)

Radioactive release data from Canadian nuclear generating stations 1872-1987

International Nuclear Information System (INIS)

1989-03-01

All nuclear generating stations emit small quantities of radioactive effluent both into the atmosphere and in the form of liquid effluent, into the adjoining water body, be it river, lake or sea. The purpose of this document is to report on the magnitude of these emissions for each nuclear generating station in Canada and to indicate how these emissions compare with the relevant limitations imposed by the Atomic Energy Control Board as part of its regulatory and licensing program. This report incorporates histograms indicating the annual releases of tritium in air, noble gases, iodine-131, airborne particulates, tritium in water and waterborne gross beta activity for each nuclear generating station. In addition, for Pickering NGS 'A', annual released of carbon-14 are depicted for the years 1986 and 1987. In each case the emission data are compared to the Derived Emission Limit (DEL) in order that the data may be placed in perspective. At present, only Pickering NGS 'A' is required to monitor and report carbon-14 emissions. Environmental monitoring for C-14 is conducted around the Bruce site to determine the environmental impact of its emission and whether effluent monitoring will be necessary in future years. Three nuclear generating stations have been permanently taken out of service during the last few years (Gentilly NGS-1, Douglas Point NGS and NPD NGS). Some small emissions from these sites do still occur, however, due to decontamination and decommissioning operations. (11 tabs., 26 figs.)

RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

International Nuclear Information System (INIS)

KOZLOWSKI, S.D.

2007-01-01

This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditions for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below

A mathematical model for predicting the probability of acute mortality in a human population exposed to accidentally released airborne radionuclides. Final report for Phase I of the project: early effects of inhaled radionuclides

International Nuclear Information System (INIS)

Filipy, R.E.; Borst, F.J.; Cross, F.T.; Park, J.F.; Moss, O.R.

1980-06-01

The report presents a mathematical model for the purpose of predicting the fraction of human population which would die within 1 year of an accidental exposure to airborne radionuclides. The model is based on data from laboratory experiments with rats, dogs and baboons, and from human epidemiological data. Doses from external, whole-body irradiation and from inhaled, alpha- and beta-emitting radionuclides are calculated for several organs. The probabilities of death from radiation pneumonitis and from bone marrow irradiation are predicted from doses accumulated within 30 days of exposure to the radioactive aerosol. The model is compared with existing similar models under hypothetical exposure conditions. Suggestions for further experiments with inhaled radionuclides are included

Risk assessment for the on-site transportation of radioactive wastes for the U.S. Department of Energy Waste Management Programmatic Environmental Impact Statement

International Nuclear Information System (INIS)

Biwer, B.M.; Monette, F.A.; Chen, S.Y.

1996-12-01

This report documents the risk assessment performed for the on-site transportation of radioactive wastes in the US Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). Risks for the routine shipment of wastes and the impacts from potential accidental releases are analyzed for operations at the Hanford Site (Hanford) near Richland, Washington. Like other large DOE sites, hanford conducts waste management operations for all wastes types; consequently, the impacts calculated for Hanford are expected to be greater than those for smaller sites. The risk assessment conducted for on-site transportation is intended to provide an estimate of the magnitude of the potential risk for comparison with off-site transportation risks assessed for the WM PEIS

Formulation and evaluation of gas release scenarios for the silo in Swedish Final Repository for Radioactive Waste (SFR)

International Nuclear Information System (INIS)

Carlsson, J.; Moreno, L.

1992-01-01

The Swedish Final Repository for Radioactive Waste (SFR) has been in operation since 1988 and is located in the crystalline rock, 60 m below the Baltic Sea. In the licensing procedure for the SFR the safety assessment has been complemented with a detailed scenario analysis of the performance of the repository. The scenarios include the influence on radionuclide release by gas formation and gas transport processes in the silo. The overall conclusion is that the release of most radionuclides from the silo is only marginally affected by the formation and release of gas, even for scenarios considering unexpected events. The largest effects were found for short-lived radionuclides and radionuclides that have no or low sorption ability. Except for very extreme scenarios for the silo the overall impact from repository on the environment is by far dominated by the release of radionuclides from the rock vaults. 10 refs., 6 figs

Radiative accidental matter

Energy Technology Data Exchange (ETDEWEB)

Sierra, D. Aristizabal [IFPA, Dép. AGO, Université de Liège,Bât B5, Sart Tilman B-4000 Liège 1 (Belgium); Universidad Técnica Federico Santa María - Departamento de Física,Casilla 110-V, Avda. España 1680, Valparaíso (Chile); Simoes, C.; Wegman, D. [IFPA, Dép. AGO, Université de Liège,Bât B5, Sart Tilman B-4000 Liège 1 (Belgium)

2016-07-25

Accidental matter models are scenarios where the beyond-the-standard model physics preserves all the standard model accidental and approximate symmetries up to a cutoff scale related with lepton number violation. We study such scenarios assuming that the new physics plays an active role in neutrino mass generation, and show that this unavoidably leads to radiatively induced neutrino masses. We systematically classify all possible models and determine their viability by studying electroweak precision data, big bang nucleosynthesis and electroweak perturbativity, finding that the latter places the most stringent constraints on the mass spectra. These results allow the identification of minimal radiative accidental matter models for which perturbativity is lost at high scales. We calculate radiative charged-lepton flavor violating processes in these setups, and show that μ→eγ has a rate well within MEG sensitivity provided the lepton-number violating scale is at or below 5×10{sup 5} GeV, a value (naturally) assured by the radiative suppression mechanism. Sizeable τ→μγ branching fractions within SuperKEKB sensitivity are possible for lower lepton-number breaking scales. We thus point out that these scenarios can be tested not only in direct searches but also in lepton flavor-violating experiments.

The significance of ground contamination following an accidental release of radioactivity

International Nuclear Information System (INIS)

Corbett, J.O.

1977-07-01

The reasons for extending the analysis of hypothetical accidents to include ground contamination as a route to radiation dosage in man are discussed. Models and data available for such an assessment of ground contamination are examined with reference to the deposition of radionuclides from the atmosphere and dosage by direct γ-irradiation, ingestion of radionuclides in milk and inhalation of a resuspended aerosol. Dosage through these routes is then compared with that which arises directly from the plume emitted in a hypothetical accident. The assessment methods are subject to uncertainty, so that in some cases only an upper limit to dose or an estimate within an order of magnitude can be obtained. Areas where further research could lead to a reduction of this uncertainty are identified. (author)

Effects of natural radioactivity on food radioactivity measurement

International Nuclear Information System (INIS)

Ennyu, Atsuhito

2012-01-01

Since the accident of the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Company, groups and individuals including local governments, food manufacturers, distribution circles, retail circles, and citizens are eager to measure the radioactivity of food, in order to confirm the safety of food from the concerns about radioactive contamination. The measurement of radioactivity of food is done by quantitatively determining gamma rays due to radioactive cesium that was incorporated into the biosphere cycle after having been released into the environment. As for the radioactivity measurement of food using gamma-ray spectrometry with a potassium iodide scintillation detector, which is very commonly used, this paper describes the handling method of obtained data, the principle of erroneous detection of radioactive cesium and iodine interrupted by natural radionuclides, and countermeasures for it. Major natural radioactivity sources are uranium series and thorium series. This paper explains gamma rays, which are characteristic in the decay process of uranium series and often affect the measurement of radioactive cesium in food and water. (O.A.)

A radioecological risk assessment tool for post-accidental situations. Application in the Toulon marine area (South of France)

International Nuclear Information System (INIS)

Duffa, Celine; Thebault, Herve

2010-01-01

To estimate any post-accidental consequences in the environment and to propose adapted management plans, data concerning both radionuclides spatial dispersion and environmental sensitivity to this contamination are necessary. IRSN develops integrated tools to support experts and decision makers in post-accident situation concerning this area. This management tool aims to combine radionuclides dispersion modelling and radioecological sensitivity local maps to outline vulnerable areas front of a known release. An example of application to a maritime environment is given: the naval base of Toulon. Calculation of radionuclides dispersion is based on the existing MARS 3D hydrodynamic model. The radioecological sensitivity of the marine environment is based on the ecosystem intrinsic characteristics and the socio-economical resources. Mapping radionuclides dispersion results and sensitivity of defined zones of the studies area, we show that the Little Bay and the western part of Toulon marine area are the most vulnerable in case of accidental release occuring in the harbour. (orig.)

Siting of Nuclear Power Plants in Metropolitan Areas. Estimation of Population Doses due to Accidental Release of Fission Products

Energy Technology Data Exchange (ETDEWEB)

Bresser, H. [Technischer Ueberwachungs-Verein Rheinland E.V., Cologne (Germany); Schwarzer, W. [Institut fuer Reaktorsicherheit der Technischen Ueberwachungs-Vereine E.V., Cologne (Germany)

1967-09-15

The safety of large nuclear power plants in heavily populated areas depends entirely on engineered safeguards. An assessment of their reliability and effectiveness will have to play a major role in any safety analysis of such a plant, and this assessment will have to be made on the basis of the radiological burden to the environment - in terms of individual dose and a population dose - which can be accepted as tolerable in case of a severe accident. The calculation of the dispersion of fission products in the atmosphere, which links the radiological burden to the release of radioactivity, should be modified. The fact that distance factors, aside from a comparably small exclusion area, can no longer be taken into account suggests the introduction of the parameter ''population density'' and an extensive use of the man-rem concept. In this connection the time history of the release and the influence of variations of wind directions lose their importance. The authors have carried out calculations of the population dose, which could be received in a metropolitan area as a consequence of a severe reactor accident, using population densities, height of release above ground and generalized meteorological data as the main parameters. The results of these calculations are used as a basis for an assessment of the performance requirements of the engineered safeguards system, and the relative importance of different components of this system is discussed. (author)

Accidental tritium release from nuclear technologies and a radiobiological survey of the impact of low dose tritium on the developing mouse brain

International Nuclear Information System (INIS)

Jain, Narendra; Bhatia, A.L.

2008-01-01

Full text: The Atomic Energy Act, 1962 provides for the development of the peaceful uses of atomic energy for the welfare of the people in India. The licensing policy adopted for nuclear power stations in India requires that the plants meet stringent requirements based on the system of dose limitation, recommended by the International Commission of Radiological Protection (ICRP). Currently, nuclear energy is contributing just 3% of the country's power generation. The share of nuclear power is proposed to be increased to 10% in the near future. With the introduction of nuclear energy, the need to assess the radioecological and radiobiological impact of radionuclides of long half- life existing in the environment for longer duration has appeared. Tritium, a radioactive by-product of power reactors is one of such major radionuclides of concern. In the world, routine releases and accidental spills of tritium from nuclear power plants pose a growing health and safety concern. Tritium has been observed in ground water in the vicinity of several nuclear stations. Exposure to tritium has been clinically proven to cause deleterious and detectable effects such as teratogenesis, cancer and life shortening in laboratory animals. There is, now, a growing emphasis on tritium in radiation protection as the challenge of nuclear fusion comes nearer. Present investigation is an attempt to elucidate the effects of low dose tritiated water exposure on developing mouse cerebellum. Pregnant Swiss albino mice (12-15 in number were given a priming injection 7.4 and 74 kBq/ml of body water) of tritiated water (HTO) on 16 th day of gestation. From the same day onward, through parturition, till the last interval studied, the pregnant females were continuously maintained respectively on 11.1 and 111 kBq/ml of tritiated drinking water provided ad libidum. After cervical dislocation the litters were autopsied on 1, 3, 5 and 6 weeks post- partum. Brains were fixed and then cerebellum from each

Guidelines for calculating radiation doses to the public from a release of airborne radioactive material under hypothetical accident conditions in nuclear reactors

International Nuclear Information System (INIS)

1991-04-01

This standard provides guidelines and a methodology for calculating effective doses and thyroid doses to people (either individually or collectively) in the path of airborne radioactive material released from a nuclear facility following a hypothetical accident. The radionuclides considered are those associated with substances having the greatest potential for becoming airborne in reactor accidents: tritium (HTO), noble gases and their daughters, radioiodines, and certain radioactive particulates (Cs, Ru, Sr, Te). The standard focuses on the calculation of radiation doses for external exposures from radioactive material in the cloud; internal exposures for inhalation of radioactive material in the cloud and skin penetration of tritium; and external exposures from radionuclides deposited on the ground. It uses as modified Gaussian plume model to evaluate the time-integrated concentration downwind. (52 refs., 12 tabs., 21 figs.)

[THREE CASES OF ACCIDENTAL AUTO-INJECTION OF ADRENALINE].

Science.gov (United States)

Yanagida, Noriyuki; Iikura, Katsuhito; Ogura, Kiyotake; Wang, Ling-jen; Asaumi, Tomoyuki; Sato, Sakura; Ebisawa, Motohiro

2015-12-01

Reports on accidental auto-injection of adrenaline are few. We encountered three cases of accidental injection of adrenaline. In this study, we have examined and reported the clinical courses and symptoms of our cases. CASE 1 involved a female physician in her 50s who had attended an explanatory meeting on auto-injection of adrenaline. She mistook EpiPen® to be the EpiPen trainer and accidentally injected herself with 0.3 mg EpiPen®. Her systolic/diastolic pressure peaked at 7 min to reach 144/78 mmHg and decreased to 120/77 mmHg at 14 min. Except for palpitation after 7 min, the only subjective symptom was local pain at the injection site. CASE 2 was noted in a 6-year-old boy. He accidentally pierced his right forefinger with 0.15 mg EpiPen®, and after 20 min, his right forefinger was swollen. The swelling improved 80 min after the accidental injection. CASE 3 was noted in a 4-year-old girl. She accidentally injected herself with 0.15 mg EpiPen®. Her systolic/diastolic pressure peaked at 23 min to reach 123/70 mmHg and decreased to 96/86 mmHg at 28 min. Severe adverse effects of accidental auto-injection of adrenaline were not observed in these three cases. Our findings suggest that while handling adrenaline auto-injectors, we should keep in mind the possibility of accidental injection.

Radioactive releases of nuclear power plants: the code ASTEC

International Nuclear Information System (INIS)

Sdouz, G.; Pachole, M.

1999-11-01

In order to adopt potential countermeasures to protect the population during the course of an accident in a nuclear power plant a fast prediction of the radiation exposure is necessary. The basic input value for such a dispersion calculation is the source term, which is the description of the physical and chemical behavior of the released radioactive nuclides. Based on a source term data base a pilot system has been developed to determine a relevant source term and to generate the input file for the dispersion code TAMOS of the Zentralanstalt fuer Meteorologie und Geodynamik (ZAMG). This file can be sent directly as an attachment of e-mail to the TAMOS user for further processing. The source terms for 56 European nuclear power plant units are included in the pilot version of the code ASTEC (Austrian Source Term Estimation Code). The use of the system is demonstrated in an example based on an accident in the unit TEMELIN-1. In order to calculate typical core inventories for the data bank the international computer code OBIGEN 2.1 was installed and applied. The report has been completed with a discussion on the optimal data transfer. (author)

Radioactive waste treatment and handling in France

International Nuclear Information System (INIS)

Sivintsev, Yu.V.

1984-01-01

Classification of radioactive wastes customary in France and the program of radiation protection in handling them are discussed. Various methods of radioactive waste processing and burial are considered. The French classification of radioactive wastes differs from one used in the other countries. Wastes are classified under three categories: A, B and C. A - low- and intermediate-level radioactive wastes with short-lived radionuclides (half-life - less than 30 years, negligible or heat release, small amount of long-lived radionuclides, especially such as plutonium, americium and neptunium); B - low- and intermediate-level radioactive wastes with long-lived radionuclides (considerable amounts of long-lived radionuclides including α-emitters, low and moderate-level activity of β- and γ-emitters, low and moderate heat release); C - high-level radioactive wastes with long-lived radionuclides (high-level activity of β- and γ-emitters, high heat release, considerable amount of long-lived radionuclides). Volumetric estimations of wastes of various categories and predictions of their growth are given. It is noted that the concept of closed fuel cycle with radiochemical processing of spent fuel is customary in France

USEPA consideration of human intrusion in setting radioactive waste disposal standards

International Nuclear Information System (INIS)

Egan, D.J.; Hadlock, C.R.

1989-01-01

In 1985, the United States Environmental Protection Agency (USEPA) promulgated standards for the disposal of spent nuclear fuel and high-level and transuranic radioactive wastes (40 CFR Part 191). These standards placed limits, called containment requirements, on the projected releases of radioactivity due to both normal and accidental events for 10,000 years after disposal. The standards also contained qualitative assurance requirements that described the role foreseen for both active and passive institutional controls. They included both requirements for such institutional controls and limitations on the ways that they could be relied upon. This paper describes these assumptions about institutional controls made by the USEPA, and it discusses the types of future societies that would be consistent with such assumptions. The paper also reviews the USEPA's approach towards assessing the long-term performance of mined geologic repositories. In these assessments, the risks caused by inadvertent human intrusion into the area of a repository usually dominate the risks projected from other release scenarios. The assumptions made about inadvertent intrusion are discussed, and they are related to the policies regarding institutional controls. The disposal standards that the USEPA promulgated in 1985 were overturned by a Federal court in 1987, and the Agency is now preparing revised standards for public review and comment. These are expected to by published in 1990. However, the approaches regarding institutional controls and human intrusion are expected to remain the same as those used in 1985. Some paragraphs (selected by the NEA Secretariat) of 40 CFR Part 191, subpart B (as of 1985 version) with particular relevance to human intrusion are cited

Biological implications of radionuclides released from nuclear industries

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-08-15

The development of nuclear power technologies has led to a rapid increase in the number of reactors and other installations including fuel reprocessing and radioactive waste treatment plants in operation. Associated with these developments are the concomitant possibilities for release of radionuclides in the environment, which in turn might exert some biological impacts including late somatic and genetic effects on man. The principal objective of the Agency's symposium was, therefore, to review critically the current information on the biological effects of exposure to low levels of incorporated radionuclides and the radiation doses absorbed from them. The purpose of this review was to provide a sound scientific basis on which to evaluate radiation safety standards, risk-benefit analysis, as well as the regulatory control and management of nuclear wastes. The major part of the discussions centered around the problems of the radiobiology, radio-oncology, radio-ecology and toxicology of the transuranic such as such as plutonium, americium, curium as well as radionuclide species like tritium, krypton and iodine among others, which are expected to be released from these nuclear installations. Current data and practical information obtained through suitably designed animal studies and also from epidemiological, ecological and food-chain analyses and other relevant follow-up surveys of late effects in accidentally exposed occupational personnel were reported for discussion and risk evaluation.

Radiological protection aspects of geological disposal of high-level radioactive waste

International Nuclear Information System (INIS)

Matsuzuru, Hideo; Kimura, Hideo

1992-01-01

A high-level radioactive waste, generated at a nuclear fuel reprocessing plant, will be disposed of deep, i.e., several hundred meters, within geological formations, to isolate it from the human environment. Since the waste contains significant amounts of long-lived radionuclides, such as Tc-99, I-129, Cs-135 and transuranic elements, the safety of its disposal, particularly as regards the requirement for the radiological protection of human and his environment even in the far future, is one of the essential subjects of all countries engaged in nuclear power production. The radiological protection system has long been established and applied to regulate radiation exposures to the public associated with a relatively short-term release of radioactive materials, during normal and accidental conditions, from nuclear installations such as a power plant and reprocessing plant. Radioactive waste disposal, which potentially offers a long-term radiological consequence on the public, inevitably produces a specific requirement, from the standpoint of radiological protection, that individuals and populations in the future should be accorded at least a current level of the protection. This requirement has caused a serious debate, among the community of radiological protection, on how to establish radiological protection standards and criteria, and how to establish safety assessment methodologies to demonstrate compliance with them. We have discussed in this paper on specific items such as numerical guides to indicate radiological consequences, time frames over which calculations of the consequences are to be carried out, uncertainties to be involved in the calculations, and safety assessment methodologies. (author)

Accidental hypothermia-an update

DEFF Research Database (Denmark)

Paal, Peter; Gordon, Les; Strapazzon, Giacomo

2016-01-01

BACKGROUND: This paper provides an up-to-date review of the management and outcome of accidental hypothermia patients with and without cardiac arrest. METHODS: The authors reviewed the relevant literature in their specialist field. Summaries were merged, discussed and approved to produce this nar......BACKGROUND: This paper provides an up-to-date review of the management and outcome of accidental hypothermia patients with and without cardiac arrest. METHODS: The authors reviewed the relevant literature in their specialist field. Summaries were merged, discussed and approved to produce...... this narrative review. RESULTS: The hospital use of minimally-invasive rewarming for non-arrested, otherwise healthy, patients with primary hypothermia and stable vital signs has the potential to substantially decrease morbidity and mortality for these patients. Extracorporeal life support (ECLS) has...... and post-resuscitation care. CONCLUSIONS: Based on new evidence, additional clinical experience and clearer management guidelines and documentation, the treatment of accidental hypothermia has been refined. ECLS has substantially improved survival and is the treatment of choice in the patient with unstable...

Radioactive source monitoring system based on RFID and GPRS

International Nuclear Information System (INIS)

He Haiyang; Zhou Hongliang; Zhang Hongjian; Zhang Sheng; Zhou Junru; Weng Guojie

2011-01-01

Nuclear radiation produced by radioactive source is harmful to the health of human body, and the lost and theft of radioactive source will cause environmental pollution and social panic. In order to solve the abnormal leaks, accidental loss, theft and other problems of the radioactive source, a radioactive source monitoring system based on RFID, GPS, GPRS and GSM technology is put forward. Radiation dose detector and GPS wireless location module are used to obtain the information of radiation dose and location respectively, RFID reader reads the status of a tag fixed on the bottom of the radioactive source. All information is transmitted to the remote monitoring center via GPRS wireless transmission. There will be an audible and visual alarm when radiation dose is out of limits or the state of radioactive source is abnormal, and the monitoring center will send alarming text messages to the managers through GSM Modem at the same time. Thus, the functions of monitoring and alarming are achieved. The system has already been put into operation and is being kept in functional order. It can provide stable statistics as well as accurate alarm, improving the supervision of radioactive source effectively. (authors)

Radioactive wastes management in fiscal year 1983 in the fuel reprocessing plant

International Nuclear Information System (INIS)

1985-01-01

In the nuclear fuel reprocessing plant of Power Reactor and Nuclear Fuel Development Corporation, the releases of radioactive gaseous and liquid wastes are so managed not to exceed the respective objective release levels. Of the radioactive liquid wastes, the high level concentrated wastes are stored in tanks and the low level wastes are stored in tanks or asphalt solidified. For radioactive solid wastes, high level solid wastes are stored in casks, low level solid wastes and asphalt solids in drums etc. The releases of radioactive gaseous and liquid wastes in the fiscal year 1983 were below the objective release levels. The radioactive wastes management in the fuel reprocessing plant in fiscal year 1983 is given in tables, the released quantities, the stored quantities, etc. (Mori, K.)

Release studies of a thin foil tantalum target for the production of short-lived radioactive nuclei

CERN Document Server

Bennett, J R J; Drumm, P V; Lettry, Jacques; Nilsson, T; Catherall, R; Jonsson, O C; Ravn, H L; Simon, H

2002-01-01

Measurements have been made at ISOLDE, of the release curves and yields of radioactive beams of lithium, sodium and beryllium from a target constructed from 2 $\\mu$m thick foils. The release curves have been analysed by fitting to a mathematical model to determine the coefficients of diffusion of the particles in the foils and effusion through the target and ionizer at several temperatures. Through a better understanding of the rate of transport of the particles, it is possible to design targets and ionizers with improved yields. This is most important for the rare, short-lived isotopes in which there is considerable interest for physics experiments. This target has demonstrated large increases in the yields of $^{11}$Li and $^{12}$Be, in agreement with the predictions of the model. (11 refs).

Real-time computing of the environmental consequences of an atmospheric accidental release of radioactive material: user's point of view

International Nuclear Information System (INIS)

Boeri, G.; Caracciolo, R.; Dickerson, M.

1985-07-01

All calculations of the consequences of an atmospheric release must start with atmospheric dispersion calculations. Time factors make external and inhalation dose estimates of immediate concern closely followed by ground contamination of land, pastures and onch agricultural crops. In general, the difficulties in modeling the source term and atmospheric transport and diffusion account for most of the error in calculating the dose to man. Thus, sophisticated treatment of the dose part of the calculating is not usually justified, though the relative distribution of dose in individual organs may be needed for correct decision marking. This paper emphasizes the atmospheric transport and diffusion part of the dose estimate and relates how this calculation can be used to estimate dose. 12 refs

Selection of Hydrological Model for Waterborne Release

International Nuclear Information System (INIS)

Blanchard, A.

1999-01-01

Following a request from the States of South Carolina and Georgia, downstream radiological consequences from postulated accidental aqueous releases at the three Savannah River Site nonreactor nuclear facilities will be examined. This evaluation will aid in determining the potential impacts of liquid releases to downstream populations on the Savannah River. The purpose of this report is to evaluate the two available models and determine the appropriate model for use in following waterborne release analyses. Additionally, this report will document the accidents to be used in the future study

Automatic mapping of monitoring data

DEFF Research Database (Denmark)

Lophaven, Søren; Nielsen, Hans Bruun; Søndergaard, Jacob

2005-01-01

of identifying a release of radioactivity provided that the number of sampling locations is sufficiently high. Consequently, we believe that a combination of applying the presented mapping approach and the physical knowledge of the transport processes of radioactivity should be used to predict the extreme values.......). In the second dataset an accidental release of radioactivity in the environment was simulated in the South-Western corner of the monitored area. The approach has a tendency to smooth the actual data values, and therefore it underestimates extreme values, as seen in the second dataset. However, it is capable...

Geographical distribution of radioactive nuclides released from the Fukushima Daiichi Nuclear Power Station accident in eastern Japan

International Nuclear Information System (INIS)

Ishida, Masanobu; Umetsu, Kohei; Sugimoto, Miyabi; Yamaguchi, Yuta; Yamazaki, Hideo; Nakagawa, Ryota

2013-01-01

The geographical distribution of radioactive nuclides released from the Fukushima Daiichi Nuclear Power Station accident in metropolitan areas located in eastern Japan was investigated. The radioactive contamination of environmental samples, including soil and biological materials, was analyzed. The concentrations of 131 I, 134 Cs, and 137 Cs in the soil samples collected from Fukushima City were 122000, 11500 and 14000 Bq/kg on 19th March 2011 and 129000, 11000 and 13700 Bq/kg on 26th March 2011, for the three nuclides respectively. The concentrations of 131 I, 134 Cs and 137 Cs in the soil samples collected from March-June 2011 from study sites ranged from 240 to 101000, 28 to 26200, and 14 to 33700 Bq/kg, respectively. In Higashiosaka City, it began to detect those radioactive nuclides in the atmospheric airborne dust from 25th March. Radioactive fission products 95 Zr- 95 Nb were detected on 18th April 2011. Biological samples collected from Tokyo Bay were studied. The maximum concentrations of 134 Cs and 137 Cs detected in the biological samples were 12.2 and 19.2 Bq/kg, which were measured in goby. 131 I was not detected in the biological samples however, trace amounts of the short half-life nuclide 110m Ag were found in the shellfish samples. (author)