Efficient power allocation for fixed-gain amplify-and-forward relaying in rayleigh fading

KAUST Repository

Zafar, Ammar

2013-06-01

In this paper, we study power allocation strategies for a fixed-gain amplify-and-forward relay network employing multiple relays. We consider two optimization problems for the relay network: 1) optimal power allocation to maximize the end-to-end signal-to-noise ratio (SNR) and 2) minimizing the total consumed power while maintaining the end-to-end SNR over a threshold value. We assume that the relays have knowledge of only the channel statistics of all the links. We show that the SNR maximization problem is concave and the power minimization problem is convex. Hence, we solve the problems through convex programming. Numerical results show the benefit of allocating power optimally rather than uniformly. © 2013 IEEE.

Energy-Efficient Power Allocation for Fixed-Gain Amplify-and-Forward Relay Networks with Partial Channel State Information

KAUST Repository

Zafar, Ammar; Alouini, Mohamed-Slim; Chen, Yunfei; Radaydeh, Redha M.

2012-01-01

In this letter, energy-efficient transmission and power allocation for fixed-gain amplify-and-forward relay networks with partial channel state information (CSI) are studied. In the energy-efficiency problem, the total power consumed is minimized

The present situation of D-1 fracture zone investigation in Tsuruga Power Station

International Nuclear Information System (INIS)

Ishii, Kimiya; Iriya, Takeshi; Dozaki, Koji; Hoshino, Tomokiko

2013-01-01

Shatter zone called 'D-1' lies under the reactor building of Tsuruga Power Station (Tsuruga PS) Unit. 2. The Japan Atomic Power Company (JAPC) has been investigating the D-1 shatter zone in several waves (Overlying Strata Analysis Method, Tephra Analysis Method etc.) and evaluating that the D-1 shatter zone would not be an active fault which should be taken into account in the seismic design, so far. Additionally, JAPC have numerically analyzed how the shatter zones would be affected in case of the Urasoko fault moves using elasticity theory of dislocation method and Two Dimensional Finite Element Method. (author)

Variations of wave energy power in shoaling zone of Benin coastal zone

Directory of Open Access Journals (Sweden)

Mathias A. Houekpoheha

2015-02-01

Full Text Available Today, we observe at the population level, that the improvement in comfort is accompanied by an increase in the electrical energy required. The predicted exhaustion of fossil energy resources maintains some speculation. Their unequal geographical distribution justifies the energy dependence of Benin overlooked from outside. So it is urgent to explore the various sources of renewable energy available to Benin. In this work, using measurements made ​​by the Millennium Challenge Account (MCA-Benin as part of the extension of the port of Cotonou, with Boussinesq equations (Peregrine and Stokes waves dispersion relation, we characterized the variations of various swell parameters (height, wavelength, velocities in the shoaling zone on the study site and proceeded to estimate variations in wave energy power from deep waters to the bathymetric breaking point. Finally, the zone with high energy power (where the conversion of this energy into electrical energy would be profitable of these waves is highlighted on the site, the local water depth at the point of breaking waves is evaluated and results obtained allowed to justify the very energetic character take by these swells on this coast when they are close to the beach.

Simultaneous Wireless Power Transfer and Secure Multicasting in Cooperative Decode-and-Forward Relay Networks.

Science.gov (United States)

Lee, Jong-Ho; Sohn, Illsoo; Kim, Yong-Hwa

2017-05-16

In this paper, we investigate simultaneous wireless power transfer and secure multicasting via cooperative decode-and-forward (DF) relays in the presence of multiple energy receivers and eavesdroppers. Two scenarios are considered under a total power budget: maximizing the minimum harvested energy among the energy receivers under a multicast secrecy rate constraint; and maximizing the multicast secrecy rate under a minimum harvested energy constraint. For both scenarios, we solve the transmit power allocation and relay beamformer design problems by using semidefinite relaxation and bisection technique. We present numerical results to analyze the energy harvesting and secure multicasting performances in cooperative DF relay networks.

Prediction and assimilation of surf-zone processes using a Bayesian network: Part I: Forward models

Science.gov (United States)

Plant, Nathaniel G.; Holland, K. Todd

2011-01-01

Prediction of coastal processes, including waves, currents, and sediment transport, can be obtained from a variety of detailed geophysical-process models with many simulations showing significant skill. This capability supports a wide range of research and applied efforts that can benefit from accurate numerical predictions. However, the predictions are only as accurate as the data used to drive the models and, given the large temporal and spatial variability of the surf zone, inaccuracies in data are unavoidable such that useful predictions require corresponding estimates of uncertainty. We demonstrate how a Bayesian-network model can be used to provide accurate predictions of wave-height evolution in the surf zone given very sparse and/or inaccurate boundary-condition data. The approach is based on a formal treatment of a data-assimilation problem that takes advantage of significant reduction of the dimensionality of the model system. We demonstrate that predictions of a detailed geophysical model of the wave evolution are reproduced accurately using a Bayesian approach. In this surf-zone application, forward prediction skill was 83%, and uncertainties in the model inputs were accurately transferred to uncertainty in output variables. We also demonstrate that if modeling uncertainties were not conveyed to the Bayesian network (i.e., perfect data or model were assumed), then overly optimistic prediction uncertainties were computed. More consistent predictions and uncertainties were obtained by including model-parameter errors as a source of input uncertainty. Improved predictions (skill of 90%) were achieved because the Bayesian network simultaneously estimated optimal parameters while predicting wave heights.

33 CFR 165.115 - Safety and Security Zones; Pilgrim Nuclear Power Plant, Plymouth, Massachusetts.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety and Security Zones; Pilgrim Nuclear Power Plant, Plymouth, Massachusetts. 165.115 Section 165.115 Navigation and Navigable... Coast Guard District § 165.115 Safety and Security Zones; Pilgrim Nuclear Power Plant, Plymouth...

Forward Link Power Control Strategy and its Optimum Issue in CDMA Cellular Networks

Institute of Scientific and Technical Information of China (English)

无

2000-01-01

In this paper, we propose a theoretical method in order to estimate the forward link outage probability and user capacity of a cellular system which are based on IS-95 CDMA standard, especialy impact of power control strategy and voice activity monitoring in the system under long-term fading effects, in which the light and heavy fadings are considered. According to the numerical results obtained in this paper, the power control strategy leads to approximately the threefold user capacity in contrast to the situation without power control strategy. The reults are compared with Interference-to-Signal Ratio (ISR) driven power control scheme[6][9] which can be used only for simulation of the system. The power control strategy not only improves the desired signal to the interference ratio in the reference user's receiver, but also offers uniform service to the user wherever it is located in the cell.

'Transitorion' program for the simulation of the liquid zone evolution against power transients

International Nuclear Information System (INIS)

Coutsiers, Ernesto; Rabiti, Arnaldo; Pomerantz, Marcelo E.; Villar, Javier

2003-01-01

This work presents a program that allows to simulate the liquid zones evolution against power transients at Embalse nuclear power plant reactor. This program takes into account the dynamic effects of plutonium, samarium, xenon and iodine. It simulates also fuel burning, coolant void and the behavior of the reactor regulating system. The validation, based in the comparison with plant's real cases, gives a maximum error of 7% in liquid zone's average in periods of around 5 days. However, the typical adjustment has a lower error, around 2% in liquid zone's average. As the main conclusions of this work the good adjustment of the results of the code as well as the building of an important economic tool for the power plant could be highlighted. (author )

A Method for Optimal Load Dispatch of a Multi-zone Power System with Zonal Exchange Constraints

Science.gov (United States)

Hazarika, Durlav; Das, Ranjay

2018-04-01

This paper presented a method for economic generation scheduling of a multi-zone power system having inter zonal operational constraints. For this purpose, the generator rescheduling for a multi area power system having inter zonal operational constraints has been represented as a two step optimal generation scheduling problem. At first, the optimal generation scheduling has been carried out for the zone having surplus or deficient generation with proper spinning reserve using co-ordination equation. The power exchange required for the deficit zones and zones having no generation are estimated based on load demand and generation for the zone. The incremental transmission loss formulas for the transmission lines participating in the power transfer process among the zones are formulated. Using these, incremental transmission loss expression in co-ordination equation, the optimal generation scheduling for the zonal exchange has been determined. Simulation is carried out on IEEE 118 bus test system to examine the applicability and validity of the method.

Simultaneous Wireless Power Transfer and Secure Multicasting in Cooperative Decode-and-Forward Relay Networks

Science.gov (United States)

Lee, Jong-Ho; Sohn, Illsoo; Kim, Yong-Hwa

2017-01-01

In this paper, we investigate simultaneous wireless power transfer and secure multicasting via cooperative decode-and-forward (DF) relays in the presence of multiple energy receivers and eavesdroppers. Two scenarios are considered under a total power budget: maximizing the minimum harvested energy among the energy receivers under a multicast secrecy rate constraint; and maximizing the multicast secrecy rate under a minimum harvested energy constraint. For both scenarios, we solve the transmit power allocation and relay beamformer design problems by using semidefinite relaxation and bisection technique. We present numerical results to analyze the energy harvesting and secure multicasting performances in cooperative DF relay networks. PMID:28509841

Simultaneous Wireless Power Transfer and Secure Multicasting in Cooperative Decode-and-Forward Relay Networks

Directory of Open Access Journals (Sweden)

Jong-Ho Lee

2017-05-01

Full Text Available In this paper, we investigate simultaneous wireless power transfer and secure multicasting via cooperative decode-and-forward (DF relays in the presence of multiple energy receivers and eavesdroppers. Two scenarios are considered under a total power budget: maximizing the minimum harvested energy among the energy receivers under a multicast secrecy rate constraint; and maximizing the multicast secrecy rate under a minimum harvested energy constraint. For both scenarios, we solve the transmit power allocation and relay beamformer design problems by using semidefinite relaxation and bisection technique. We present numerical results to analyze the energy harvesting and secure multicasting performances in cooperative DF relay networks.

A Low Power 2.4 GHz CMOS Mixer Using Forward Body Bias Technique for Wireless Sensor Network

Science.gov (United States)

Yin, C. J.; Murad, S. A. Z.; Harun, A.; Ramli, M. M.; Zulkifli, T. Z. A.; Karim, J.

2018-03-01

Wireless sensor network (WSN) is a highly-demanded application since the evolution of wireless generation which is often used in recent communication technology. A radio frequency (RF) transceiver in WSN should have a low power consumption to support long operating times of mobile devices. A down-conversion mixer is responsible for frequency translation in a receiver. By operating a down-conversion mixer at a low supply voltage, the power consumed by WSN receiver can be greatly reduced. This paper presents a development of low power CMOS mixer using forward body bias technique for wireless sensor network. The proposed mixer is implemented using CMOS 0.13 μm Silterra technology. The forward body bias technique is adopted to obtain low power consumption. The simulation results indicate that a low power consumption of 0.91 mW is achieved at 1.6 V supply voltage. Moreover, the conversion gain (CG) of 21.83 dB, the noise figure (NF) of 16.51 dB and the input-referred third-order intercept point (IIP3) of 8.0 dB at 2.4 GHz are obtained. The proposed mixer is suitable for wireless sensor network.

The practical zoning at the Blayais nuclear power plant

International Nuclear Information System (INIS)

Marcucci, P.

2001-01-01

The nuclear facilities have the obligation to create a zoning of their installation. The different parts must allow to identify the waste in nuclear waste or conventional waste. The nuclear power plant of the Blayais is taken as example. (N.C.)

Operation manual for the core flow test loop zone power-supply controller

Energy Technology Data Exchange (ETDEWEB)

Harper, R.E.

1981-11-01

The core flow test loop, which is part of the Gas-Cooled Fast Breeder Reactor Program (GCFR) at ORNL, is a high-pressure, high-temperature, out-of-reactor helium circulation system that is being constructed to permit study of the performance at steady-state and transient conditions of simulated segments of core assemblies for a GCFR demonstration plant. The simulated core segments, which are divided into zones, contain electrical heating elements to simulate the heat generated by fission. To control the power which is applied to a zone, a novel multitapped transformer and zone power control system have been designed and built which satisfy stringent design criteria. The controller can match power output to demand to within better than +-1% over a 900:1 dynamic range and perform full-power transients within 1 s. The power is applied in such a way as to minimize the electromagnetic interference at the bandwidth of the loop instrumentation, and the controller incorporates several error detection techniques, making it inherently fail-safe. The operation manual describes the specifications, operating instructions, error detection capabilities, error recovery, troubleshooting, calibration and QA procedures, and maintenance requirements. Also included are sections on the theory of operation, circuitry description, and a complete set of schematics.

Simultaneous Wireless Information and Power Transfer for MIMO Amplify-and-Forward Relay Systems

KAUST Repository

Benkhelifa, Fatma; Alouini, Mohamed-Slim

2016-01-01

In this paper, we investigate the simultaneous wireless information and power transfer (SWIPT) for the two-hop Multiple-Input Multiple-Output (MIMO) Amplify-and-Forward (AF) relay communication systems with the multiantenna energy harvesting relay. We derive the optimal source and relay covariance matrices to characterize the achievable region between the sourcedestination rate and the harvested energy at the relay, namely Rate-Energy (R-E) region. In this context, we consider the ideal scenario where the energy harvester (EH) receiver and the information decoder (ID) receiver at the relay can simultaneously decode the information and harvest the energy at the relay. Then, we consider more practical schemes which are the power splitting (PS) and the time switching (TS) which separate the EH and ID transfer over the power domain and the time domain, respectively.

Simultaneous Wireless Information and Power Transfer for MIMO Amplify-and-Forward Relay Systems

KAUST Repository

Benkhelifa, Fatma

2016-01-06

In this paper, we investigate the simultaneous wireless information and power transfer (SWIPT) for the two-hop Multiple-Input Multiple-Output (MIMO) Amplify-and-Forward (AF) relay communication systems with the multiantenna energy harvesting relay. We derive the optimal source and relay covariance matrices to characterize the achievable region between the sourcedestination rate and the harvested energy at the relay, namely Rate-Energy (R-E) region. In this context, we consider the ideal scenario where the energy harvester (EH) receiver and the information decoder (ID) receiver at the relay can simultaneously decode the information and harvest the energy at the relay. Then, we consider more practical schemes which are the power splitting (PS) and the time switching (TS) which separate the EH and ID transfer over the power domain and the time domain, respectively.

Energy-Efficient Power Allocation for Fixed-Gain Amplify-and-Forward Relay Networks with Partial Channel State Information

KAUST Repository

Zafar, Ammar

2012-06-01

In this report, energy-efficient transmission and power allocation for fixed-gain amplify-and-forward relay networks with partial channel state information (CSI) are studied. In the energy-efficiency problem, the total power consumed is minimized while keeping the signal-to-noise-ratio (SNR) above a certain threshold. In the dual problem of power allocation, the end-to-end SNR is maximized under individual and global power constraints. Closed-form expressions for the optimal source and relay powers and the Lagrangian multiplier are obtained. Numerical results show that the optimal power allocation with partial CSI provides comparable performance as optimal power allocation with full CSI at low SNR.

Energy-Efficient Power Allocation for Fixed-Gain Amplify-and-Forward Relay Networks with Partial Channel State Information

KAUST Repository

Zafar, Ammar

2012-09-16

In this letter, energy-efficient transmission and power allocation for fixed-gain amplify-and-forward relay networks with partial channel state information (CSI) are studied. In the energy-efficiency problem, the total power consumed is minimized while keeping the signal-to-noise-ratio (SNR) above a certain threshold. In the dual problem of power allocation, the end-to-end SNR is maximized under individual and global power constraints. Closed-form expressions for the optimal source and relay powers and the Lagrangian multiplier are obtained. Numerical results show that the optimal power allocation with partial CSI provides comparable performance as optimal power allocation with full CSI at low SNR. © 2012 IEEE.

Dose-dependent zoning of estranged territory after the Chernobyl power plant accident

International Nuclear Information System (INIS)

Savkin, M.N.

1994-01-01

The alienation zone was forming in May-September 1986 when the population was evacuated from the areas nearest to the Chernobyl power pilant. The presnet-day contour of the zone is a result of combination of a geographic criterion, a circular with a 30 km radius, and of radiation criteria developed at the earliest stages after the accident. The authors discuss dose-dependent regioning of the alienation zone at the latest stages of the accident and analyze radiation and hygienic aspects of possible reevacuation of the population

33 CFR 165.505 - Security Zone; Calvert Cliffs Nuclear Power Plant, Chesapeake Bay, Calvert County, Maryland.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zone; Calvert Cliffs Nuclear Power Plant, Chesapeake Bay, Calvert County, Maryland. 165.505 Section 165.505 Navigation and... Areas Fifth Coast Guard District § 165.505 Security Zone; Calvert Cliffs Nuclear Power Plant, Chesapeake...

Using forward markets to improve electricity market design

International Nuclear Information System (INIS)

Ausubel, Lawrence M.; Cramton, Peter

2010-01-01

Forward markets, both medium term and long term, complement the spot market for wholesale electricity. The forward markets reduce risk, mitigate market power, and coordinate new investment. In the medium term, a forward energy market lets suppliers and demanders lock in energy prices and quantities for one to three years. In the long term, a forward reliability market assures adequate resources are available when they are needed most. The forward markets reduce risk for both sides of the market, since they reduce the quantity of energy that trades at the more volatile spot price. Spot market power is mitigated by putting suppliers and demanders in a more balanced position at the time of the spot market. The markets also reduce transaction costs and improve liquidity and transparency. Recent innovations to the Colombia market illustrate the basic elements of the forward markets and their beneficial role. (author)

Using forward markets to improve electricity market design

Energy Technology Data Exchange (ETDEWEB)

Ausubel, Lawrence M.; Cramton, Peter [University of Maryland, College Park, MD 20742 (United States)

2010-12-15

Forward markets, both medium term and long term, complement the spot market for wholesale electricity. The forward markets reduce risk, mitigate market power, and coordinate new investment. In the medium term, a forward energy market lets suppliers and demanders lock in energy prices and quantities for one to three years. In the long term, a forward reliability market assures adequate resources are available when they are needed most. The forward markets reduce risk for both sides of the market, since they reduce the quantity of energy that trades at the more volatile spot price. Spot market power is mitigated by putting suppliers and demanders in a more balanced position at the time of the spot market. The markets also reduce transaction costs and improve liquidity and transparency. Recent innovations to the Colombia market illustrate the basic elements of the forward markets and their beneficial role. (author)

BER and optimal power allocation for amplify-and-forward relaying using pilot-aided maximum likelihood estimation

KAUST Repository

Wang, Kezhi

2014-10-01

Bit error rate (BER) and outage probability for amplify-and-forward (AF) relaying systems with two different channel estimation methods, disintegrated channel estimation and cascaded channel estimation, using pilot-aided maximum likelihood method in slowly fading Rayleigh channels are derived. Based on the BERs, the optimal values of pilot power under the total transmitting power constraints at the source and the optimal values of pilot power under the total transmitting power constraints at the relay are obtained, separately. Moreover, the optimal power allocation between the pilot power at the source, the pilot power at the relay, the data power at the source and the data power at the relay are obtained when their total transmitting power is fixed. Numerical results show that the derived BER expressions match with the simulation results. They also show that the proposed systems with optimal power allocation outperform the conventional systems without power allocation under the same other conditions. In some cases, the gain could be as large as several dB\\'s in effective signal-to-noise ratio.

BER and optimal power allocation for amplify-and-forward relaying using pilot-aided maximum likelihood estimation

KAUST Repository

Wang, Kezhi; Chen, Yunfei; Alouini, Mohamed-Slim; Xu, Feng

2014-01-01

Bit error rate (BER) and outage probability for amplify-and-forward (AF) relaying systems with two different channel estimation methods, disintegrated channel estimation and cascaded channel estimation, using pilot-aided maximum likelihood method in slowly fading Rayleigh channels are derived. Based on the BERs, the optimal values of pilot power under the total transmitting power constraints at the source and the optimal values of pilot power under the total transmitting power constraints at the relay are obtained, separately. Moreover, the optimal power allocation between the pilot power at the source, the pilot power at the relay, the data power at the source and the data power at the relay are obtained when their total transmitting power is fixed. Numerical results show that the derived BER expressions match with the simulation results. They also show that the proposed systems with optimal power allocation outperform the conventional systems without power allocation under the same other conditions. In some cases, the gain could be as large as several dB's in effective signal-to-noise ratio.

33 CFR 165.106 - Security Zone: Seabrook Nuclear Power Plant, Seabrook, New Hampshire.

Science.gov (United States)

2010-07-01

... Guard District § 165.106 Security Zone: Seabrook Nuclear Power Plant, Seabrook, New Hampshire. (a... property boundary of Seabrook Nuclear Power Plant identified as follows: beginning at position 42°53′58″ N, 070°51′06″ W then running along the property boundaries of Seabrook Nuclear Power Plant to position 42...

33 CFR 165.1155 - Security Zone; Diablo Canyon Nuclear Power Plant, Avila Beach, California.

Science.gov (United States)

2010-07-01

... Nuclear Power Plant, Avila Beach, California. 165.1155 Section 165.1155 Navigation and Navigable Waters... Coast Guard District § 165.1155 Security Zone; Diablo Canyon Nuclear Power Plant, Avila Beach... surface to bottom, within a 2,000 yard radius of Diablo Canyon Nuclear Power Plant centered at position 35...

Power Allocation Strategies for Distributed Space-Time Codes in Amplify-and-Forward Mode

Directory of Open Access Journals (Sweden)

Are Hjørungnes

2009-01-01

Full Text Available We consider a wireless relay network with Rayleigh fading channels and apply distributed space-time coding (DSTC in amplify-and-forward (AF mode. It is assumed that the relays have statistical channel state information (CSI of the local source-relay channels, while the destination has full instantaneous CSI of the channels. It turns out that, combined with the minimum SNR based power allocation in the relays, AF DSTC results in a new opportunistic relaying scheme, in which the best relay is selected to retransmit the source's signal. Furthermore, we have derived the optimum power allocation between two cooperative transmission phases by maximizing the average received SNR at the destination. Next, assuming M-PSK and M-QAM modulations, we analyze the performance of cooperative diversity wireless networks using AF opportunistic relaying. We also derive an approximate formula for the symbol error rate (SER of AF DSTC. Assuming the use of full-diversity space-time codes, we derive two power allocation strategies minimizing the approximate SER expressions, for constrained transmit power. Our analytical results have been confirmed by simulation results, using full-rate, full-diversity distributed space-time codes.

Forward Jet Vertex Tagging: A new technique for the identification and rejection of forward pileup jets

CERN Document Server

The ATLAS collaboration

2015-01-01

The suppression of pileup forward jets is crucial for a variety of physics analyses at the LHC, ranging from VBF Higgs production to SUSY searches. A novel forward pileup tagging technique that exploits the correlation between central and forward jets originating from pileup interactions is presented. Tracking and vertex information in the central $\\eta$ region is used to indirectly tag and reject forward pileup jets that are back-to-back to central pileup jets. The pileup suppression power observed in Pythia8 simulated events increases with jet \\pt and ranges between a 30\\% and 60\\% pileup jet removal for 90\\% jet selection efficiency for jets between 20 and 50 GeV.

Forward angle quasi-free proton-neutron analyzing powers at 0.8 GeV

International Nuclear Information System (INIS)

Barlett, M.L.

1981-01-01

As the first step in determining the nucleon-nucleon scattering amplitudes at small momentum transfers at 0.8 GeV, quasi-free p vector + n and p vector + p analyzing powers were obtained at laboratory scattering angles from 6 0 to 32.9 0 by scattering 800-MeV polarized protons from a liquid deuterium target. Forward-scattered protons were detected by the High Resolution Spectrometer (HRS), while recoil neutrons and protons were detected in coincidence with the event detected with the HRS by a 5 x 5 array of scintillators. A thin scintillator placed between the target and the array enabled discrimination of recoil particle type and facilitated the simultaneous measurement of both p vector n and n vector p analyzing powers. A comparison of the results with previously measured free p vector p and n vector p analyzing powers shows excellent agreement between the free and quasi-free p vector p analyzing powers. Poorer agreement is seen for the p vector n analyzing powers. The results of phase-shift analyses are presented in order to study the effects of the quasi-free analyzing power measurements on the determination of the pn scattering amplitudes. Amplitudes obtained from the phase-shift analyses are then used in KMT calculations. The results indicate that further nucleon-nucleon measurements are necessary in order to determine the nucleon-nucleon amplitudes unambiguously at 800 MeV

Going forward with genetics: recent technological advances and forward genetics in mice.

Science.gov (United States)

Moresco, Eva Marie Y; Li, Xiaohong; Beutler, Bruce

2013-05-01

Forward genetic analysis is an unbiased approach for identifying genes essential to defined biological phenomena. When applied to mice, it is one of the most powerful methods to facilitate understanding of the genetic basis of human biology and disease. The speed at which disease-causing mutations can be identified in mutagenized mice has been markedly increased by recent advances in DNA sequencing technology. Creating and analyzing mutant phenotypes may therefore become rate-limiting in forward genetic experimentation. We review the forward genetic approach and its future in the context of recent technological advances, in particular massively parallel DNA sequencing, induced pluripotent stem cells, and haploid embryonic stem cells. Copyright © 2013 American Society for Investigative Pathology. Published by Elsevier Inc. All rights reserved.

Expectations and forward risk premium in the Spanish deregulated power market

International Nuclear Information System (INIS)

Furio, Dolores; Meneu, Vicente

2010-01-01

Deregulation in energy markets has entailed important changes in the way agents conduct business. Price risk arises as a result of fluctuations in the future price of electricity and agents assume long or short positions in the forward and spot markets to hedge their exposure to price risk. The presence of forward risk premium in prices is evidence of the fact that agents act in the market according to risk considerations. This work aims to analyse the information content of the difference between the forward and spot prices (the so-called forward premium) regarding the agents' decisions. We find that the sign and magnitude of the ex post forward premium depend on the unexpected variation in demand and on the unexpected variation in the hydroelectric capacity, and that both the ex post and the ex ante forward premia are negatively related to the variance of spot price, as predict. We provide additional insights about relevant aspects of spot price pricing in the Spanish electricity market such as the positive relation between spot prices and CO 2 emission allowance prices or the impact on spot prices of the set of market matching rules introduced in March 2006.

Simultaneous Wireless Information and Power Transfer for MIMO Amplify-and-Forward Relay Systems

KAUST Repository

Benkhelifa, Fatma

2016-03-28

© 2015 IEEE. In this paper, we investigate two-hop Multiple- Input Multiple-Output (MIMO) Amplify-and-Forward (AF) relay communication systems with simultaneous wireless information and power transfer (SWIPT) at the multi-antenna energy harvesting relay. We derive the optimal source and relay covariance matrices to characterize the achievable region between the source-destination rate and the harvested energy at the relay, namely Rate-Energy (R-E) region. In this context, we consider the ideal scenario where the energy harvester (EH) receiver and the information decoder (ID) receiver at the relay can simultaneously decode the information and harvest the energy at the relay. This scheme provides an outer bound for the achievable R-E region since practical energy harvesting circuits are not yet able to harvest the energy and decode the information simultaneously. Then, we consider more practical schemes which are the power splitting (PS) and the time switching (TS) proposed in [1] and which separate the EH and ID transfer over the power domain and the time domain, respectively. In our study, we derive the boundary of the achievable R- E region and we show the effect of the source transmit power, the relay transmit power and the position of the relay between the source and the destination on the achievable R-E region for the ideal scenario and the two practical schemes.

An investigation on technical bases of emergency plan zone determination of Qinshan Nuclear Power Base

International Nuclear Information System (INIS)

Duan Xuyi

2000-01-01

According to the general principal and the basic method of determination of emergency zone and safety criteria and in the light of the environmental and accidental release characteristic of Qinshan Nuclear Power Base, the expectation dose of assumed accident of each plant was compared and analyzed. In consideration of the impact factor of the size of emergency plan zone and referring to the information of emergency plan zone determination of other country in the world, the suggestions of determination method of emergency plan zone are proposed

Adaptive Differential Evolution Approach for Constrained Economic Power Dispatch with Prohibited Operating Zones

Directory of Open Access Journals (Sweden)

Abdellatif HAMOUDA

2011-12-01

Full Text Available Economic power dispatch (EPD is one of the main tools for optimal operation and planning of modern power systems. To solve effectively the EPD problem, most of the conventional calculus methods rely on the assumption that the fuel cost characteristic of a generating unit is a continuous and convex function, resulting in inaccurate dispatch. This paper presents the design and application of efficient adaptive differential evolution (ADE algorithm for the solution of the economic power dispatch problem, where the non-convex characteristics of the generators, such us prohibited operating zones and ramp rate limits of the practical generator operation are considered. The 26 bus benchmark test system with 6 units having prohibited operating zones and ramp rate limits was used for testing and validation purposes. The results obtained demonstrate the effectiveness of the proposed method for solving the non-convex economic dispatch problem.

SA powers forward

International Nuclear Information System (INIS)

Anon

2000-01-01

This year's South Australian Power and Gas Conference, held in April, brought together the regulators, generators, distributors and retailers from the electricity and gas industries to discuss the challenges that face energy producers and consumers. Like the rest of the nation, South Australia is deeply involved in a major phase of change in its energy markets. The onset of deregulation, privatisation, a new regulatory regime and the approaching full contestability of electricity and gas consumers in a national market is providing exciting times for all concerned. Simultaneously investments in new infrastructure are providing extra capacity and load. There are plans brewing for the expansion of the Moomba to Adelaide pipeline, the 250MW gas fired Pelican Point power station is about to come online, South Australia's electricity interconnection with the eastern States is being enhanced and a large scale magnesium plant has been approved for development at Port Pirie. All of this was discussed against a background of dramatic summer peak power shortages that almost crippled Adelaide in December 1999, and Premier John Olsen's recent Greenhouse Gas Direction Statement. The Statement notes that South Australia's emissions per megawatt/hour are already below the national average because a large portion of its generation runs on natural gas. However South Australians still contribute more than 30 million tonnes of carbon dioxide into the atmosphere each year - about 20 tonnes for every person in the State and 7.4% of Australia's total greenhouse gas emissions

Constructing forward price curves in electricity markets

International Nuclear Information System (INIS)

Fleten, Stein-Erik; Lemming, Jacob

2003-01-01

We present and analyze a method for constructing approximated high-resolution forward price curves in electricity markets. Because a limited number of forward or futures contracts are traded in the market, only a limited picture of the theoretical continuous forward price curve is available to the analyst. Our method combines the information contained in observed bid and ask prices with information from the forecasts generated by bottom-up models. As an example, we use information concerning the shape of the seasonal variation from a bottom-up model to improve the forward price curve quoted on the Nordic power exchange

New wholesale power market design using linked forward markets :

Energy Technology Data Exchange (ETDEWEB)

Silva Monroy, Cesar Augusto; Loose, Verne William; Ellison, James F.; Elliott, Ryan Thomas; Byrne, Raymond Harry; Guttromson, Ross; Tesfatsion, Leigh S.

2013-04-01

This report proposes a reformulation of U.S. ISO/RTO-managed wholesale electric power mar- kets for improved reliability and e ciency of system operations. Current markets do not specify or compensate primary frequency response. They also unnecessarily limit the participation of new technologies in reserve markets and o er insu cient economic inducements for new capacity invest- ment. In the proposed market reformulation, energy products are represented as physically-covered rm contracts and reserve products as physically-covered call option contracts. Trading of these products is supported by a backbone of linked ISO/RTO-managed forward markets with planning horizons ranging from multiple years to minutes ahead. A principal advantage of this reformulation is that reserve needs can be speci ed in detail, and resources can o er the services for which they are best suited, without being forced to conform to rigid reserve product de nitions. This should improve the business case for electric energy storage and other emerging technologies to provide reserve. In addition, the facilitation of price discovery should help to ensure e cient energy/reserve procurement and adequate levels of new capacity investment.

Optical design of soft multifocal contact lens with uniform optical power in center-distance zone with optimized NURBS.

Science.gov (United States)

Vu, Lien T; Chen, Chao-Chang A; Yu, Chia-Wei

2018-02-05

This study aims to develop a new optical design method of soft multifocal contact lens (CLs) to obtain uniform optical power in large center-distance zone with optimized Non-Uniform Rational B-spline (NURBS). For the anterior surface profiles of CLs, the NURBS design curves are optimized to match given optical power distributions. Then, the NURBS in the center-distance zones are fitted in the corresponding spherical/aspheric curves for both data points and their centers of curvature to achieve the uniform power. Four cases of soft CLs have been manufactured by casting in shell molds by injection molding and then measured to verify the design specifications. Results of power profiles of these CLs are concord with the given clinical requirements of uniform powers in larger center-distance zone. The developed optical design method has been verified for multifocal CLs design and can be further applied for production of soft multifocal CLs.

76 FR 26607 - Safety Zone; Air Power Over Hampton Roads, Back River, Hampton, VA

Science.gov (United States)

2011-05-09

...-AA00 Safety Zone; Air Power Over Hampton Roads, Back River, Hampton, VA AGENCY: Coast Guard, DHS... the safety of life on navigable waters during the Air Power Over Hampton Roads Air Show. This action... Division Chief, Sector Hampton Roads, Coast Guard; telephone 757-668- 5581, e-mail [email protected

Impact of a 1,000-foot thermal mixing zone on the steam electric power industry

International Nuclear Information System (INIS)

Veil, J.A.

1994-04-01

Thermal discharge requirements for power plants using once-through cooling systems are based on state water quality standards for temperatures that must be met outside of designated mixing zones. This study evaluates the impact of limiting the extent of thermal mixing zones. This study evaluates the impact of limiting the extent of thermal mixing zones to no more than 1,000 feet from the discharge point. Data were collected from 79 steam electric plants. Of the plants currently using once-through cooling systems, 74% could not meet current thermal standards at the edge of a 1,000-foot mixing zone. Of this total, 68% would retrofit cooling towers, and 6% would retrofit diffusers. The estimated nationwide capital cost for retrofitting plants that could not meet current thermal standards at the edge of a 1,000-foot mixing zone is $21.4 billion. Conversion of a plant from once-through cooling to cooling towers or addition of diffusers would result in a lower energy output from that plant. For the affected plants, the total estimated replacement cost would be $370 to $590 million per year. Some power companies would have to construct new generating capacity to meet the increased energy demand. The estimated nationwide cost of this additional capacity would be $1.2 to $4.8 billion. In addition to the direct costs associated with compliance with a 1,000-foot mixing zone limit, other secondary environmental impacts would also occur. Generation of the additional power needed would increase carbon dioxide emissions by an estimated 8.3 million tons per year. In addition, conversion from once-through cooling systems to cooling towers at affected plants would result in increased evaporation of about 2.7 million gallons of water per minute nationwide

Preliminary study on acceptability of scope of thermal discharge mixing zone for nuclear power plant

International Nuclear Information System (INIS)

Liu Yongye; Yang Yang; Wang Liang; Chen Xiaoqiu; Liu Senlin

2012-01-01

Based on the situation that the existing domestic temperature control standards are not performable, the preliminary study on the acceptability of the mixing zone scope of thermal discharge for nuclear power plant was conducted in this paper, taking a coastal power station SNP as a case. The following preliminary conclusions could be drawn from the results of cluster analysis of the SNP site under different results of mathematical modeling and physical model test: 1) The influence intensity of ecological function of the SNP site seawater is small and the scope of thermal discharge mixing zone is acceptable under SNP-1 (Unit 1 and 2) operating condition; 2) the influence intensity of ecological function of the SNP site seawater is small and the scope of thermal discharge mixing zone is acceptable in spring under SNP-1 (Unit 1 and 2) and SNP-2 (Unit 3 and 4) operating condition, while the influence intensity of ecological function of the SNP site seawater is large and the scope of mixing zone is unacceptable in autumn under the same operating condition. (authors)

Optional forward contracts for electric power markets

International Nuclear Information System (INIS)

Gedra, T.W.

1994-01-01

This paper extends the idea of callable forward contracts, which are potentially useful as demand-side (interruptible-load) contracts, to their supply-side analogues. Together, these contracts allow market participants to take advantage of flexibility in generation or consumption to obtain a monetary benefit, while simultaneously removing the risk of market price fluctuations. This paper also considers the effects of strategic behavior on the part of market participants in their contract sales/purchase decisions

O Electromagnetic Power Waves and Power Density Components.

Science.gov (United States)

Petzold, Donald Wayne

1980-12-01

On January 10, 1884 Lord Rayleigh presented a paper entitled "On the Transfer of Energy in the Electromagnetic Field" to the Royal Society of London. This paper had been authored by the late Fellow of Trinity College, Cambridge, Professor J. H. Poynting and in it he claimed that there was a general law for the transfer of electromagnetic energy. He argued that associated with each point in space is a quantity, that has since been called the Poynting vector, that is a measure of the rate of energy flow per unit area. His analysis was concerned with the integration of this power density vector at all points over an enclosing surface of a specific volume. The interpretation of this Poynting vector as a true measure of the local power density was viewed with great skepticism unless the vector was integrated over a closed surface, as the development of the concept required. However, within the last decade or so Shadowitz indicates that a number of prominent authors have argued that the criticism of the interpretation of Poynting's vector as a local power density vector is unjustified. The present paper is not concerned with these arguments but instead is concerned with a decomposition of Poynting's power density vector into two and only two components: one vector which has the same direction as Poynting's vector and which is called the forward power density vector, and another vector, directed opposite to the Poynting vector and called the reverse power density vector. These new local forward and reverse power density vectors will be shown to be dependent upon forward and reverse power wave vectors and these vectors in turn will be related to newly defined forward and reverse components of the electric and magnetic fields. The sum of these forward and reverse power density vectors, which is simply the original Poynting vector, is associated with the total electromagnetic energy traveling past the local point. Another vector which is the difference between the forward

Lower limb muscle moments and power during recovery from forward loss of balance in male and female single and multiple steppers.

Science.gov (United States)

Carty, Christopher P; Cronin, Neil J; Lichtwark, Glen A; Mills, Peter M; Barrett, Rod S

2012-12-01

Studying recovery responses to loss of balance may help to explain why older adults are susceptible to falls. The purpose of the present study was to assess whether male and female older adults, that use a single or multiple step recovery strategy, differ in the proportion of lower limb strength used and power produced during the stepping phase of balance recovery. Eighty-four community-dwelling older adults (47 men, 37 women) participated in the study. Isometric strength of the ankle, knee and hip joint flexors and extensors was assessed using a dynamometer. Loss of balance was induced by releasing participants from a static forward lean (4 trials at each of 3 forward lean angles). Participants were instructed to recover with a single step and were subsequently classified as using a single or multiple step recovery strategy for each trial. (1) Females were weaker than males and the proportion of females that were able to recover with a single step were lower than for males at each lean magnitude. (2) Multiple compared to single steppers used a significantly higher proportion of their hip extension strength and produced less knee and ankle joint peak power during stepping, at the intermediate lean angle. Strength deficits in female compared to male participants may explain why a lower proportion of female participants were able to recover with a single step. The inability to generate sufficient power in the stepping limb appears to be a limiting factor in single step recovery from forward loss of balance. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Scope for nuclear weapon-free zone in central and eastern Europe

International Nuclear Information System (INIS)

Pande, Savita

1998-01-01

The idea of a Central Europe free of nuclear weapons has its roots, of course, in the end of the cold war and the break-up of the former Union. These historical developments created the necessary conditions for the Lisbon Protocol, the successful withdrawal of all nuclear weapons from Belarus, Ukraine, and Kazakhstan as well as these countries' accession to the Non-Proliferation Treaty. It is admitted that even before these steps had been achieved, Belarus had put forward the nuclear-free zone initiative at the United Nations General Assembly in 1991. Like all the other nuclear weapon-free zones, existing or potential, a proposal for such a zone entails that it be analysed in the context of its political environment, regional specificity as well as the role, and implications of the relevant outside powers. These include Warsaw Pact dissolution and its impact on control of tactical nuclear weapons as well as the North Atlantic Treaty Organisation (NATO's) expansion eastwards. It is equally important to look at the issue in the context of its history, or, in other words, the past attempts

Stability analysis of a three-phase grid-connected DC power supply with small DC-link capacitor and voltage feed-forward compensation

DEFF Research Database (Denmark)

Török, Lajos; Mathe, L.

2017-01-01

The purpose of this work was to investigate effect of the DC-link voltage feed-forward compensation on the stability of the three-phase-grid connected DC power supply, used for electrolysis application, equipped with small DC link capacitor. In case of weak grid condition, the system...

Renewable Energy Zones: Delivering Clean Power to Meet Demand, Greening the Grid

Energy Technology Data Exchange (ETDEWEB)

Hurlbut, David; Chernyakhovskiy, Ilya; Cochran, Jaquelin

2016-05-01

Greening the Grid provides technical assistance to energy system planners, regulators, and grid operators to overcome challenges associated with integrating variable renewable energy into the grid. This document describes the renewable energy zone concept that has emerged as a transmission planning tool to help scale up the penetration of solar, wind, and other resources on the power system.

Radioactive waste management in the Chernobyl exclusion zone: 25 years since the Chernobyl nuclear power plant accident.

Science.gov (United States)

Oskolkov, Boris Y; Bondarkov, Mikhail D; Zinkevich, Lubov I; Proskura, Nikolai I; Farfán, Eduardo B; Jannik, G Timothy

2011-10-01

Radioactive waste management is an important component of the Chernobyl Nuclear Power Plant accident mitigation and remediation activities in the so-called Chernobyl Exclusion Zone. This article describes the localization and characteristics of the radioactive waste present in the Chernobyl Exclusion Zone and summarizes the pathways and strategy for handling the radioactive waste-related problems in Ukraine and the Chernobyl Exclusion Zone and, in particular, the pathways and strategies stipulated by the National Radioactive Waste Management Program.

Economic analysis of hybrid power systems (PV/diesel) in different climatic zones of Tamil Nadu

International Nuclear Information System (INIS)

Suresh Kumar, U.; Manoharan, P.S.

2014-01-01

Highlights: • Investigation on economic feasibility of PV/diesel system in various climatic zones. • HOMER is used to solve economic feasibility analysis. • By the sensitivity analysis, the net present cost is reduced. • Optimum climatic zone in Tamil Nadu, India is recommended. - Abstract: With the increasing threat to environment and the fast depleting fossil fuel resources, hybrid power systems consisting of two or more renewable energy sources such as solar PV, wind, biomass, ocean thermal-with or without the back up of diesel generator have come to the forefront. These hybrid systems are normally integrated with battery banks for total reliability; such systems have brought about better quality of life in remote areas of developing economics. The remote areas in the state of Tamil Nadu in India possess excellent renewable energy sources. These areas fall under different climatic zones, are sparsely populated and are in the process of development. Though these areas are connected to the grid, Tamil Nadu grid is not stable; it is currently experiencing 40% short fall in generation. Thus grid power is available to these remote areas only for 10 h a day and even when available, there are voltage frequency problems. This paper analyses the economic feasibility of installing and operating hybrid systems in these areas. The areas are divided into different climatic zones and the hybrid system economy is analyzed for each climatic zone on the basis of NPC (net present cost), consumption of diesel and renewable fraction for all climate zones. The analysis indicates that the interior climatic zone – the area would be the optimum climatic zone to install HPS PV/diesel. The sensitivity analysis proves that the NPC of such a system can be reduced. It is suggested that due to high initial cost, government subsidy is necessary to adopt the system on a large scale. Such a profit will encourage development of renewable energy utilization and bring about rapid

Radiological mapping of emergency planning zone of Narora Atomic Power Station

International Nuclear Information System (INIS)

Pujari, R.N.; Saindane, Shashank; Narsaiah, M.V.R.; Solase, S.S.; Chaudbury, Probal; Kumar, Deepak; Gautam, Y.P.; Sharma, A.K.; Kumar, Avinash

2016-01-01

As a part of emergency preparedness programme, environmental radiation monitoring of Emergency Planning Zone (EPZ) (16 km radius) of Nuclear Power Plants (NPPs) is being carried out periodically. An environmental radiation monitoring of EPZ of Narora Atomic Power Station (NAPS) was carried out by installing various state-of-the-art mobile radiation monitoring systems in a vehicle and soil samples were collected from 40 locations. Around 200 important villages within EPZ were monitored and the radiological mapping of the monitored area is shown. The average dose rate recorded was 125 ± 28.8 nGy h -1 . Analysis of the collected dose rate data and the soil samples indicate normal background radiation level in the area

On forward induction in money-burning games

OpenAIRE

Makoto Shimoji

2001-01-01

We first consider money-burning games studied by Ben-Porath and Dekel [6]. We show that iterative weak dominance and extensive form rationalizability yield the same unique outcome in this class of games. This result suggests that weak dominance captures the forward induction logic implied by extenisve form rationalizability. Next, we consider an example of entry model by Arvan [1] to demonstrate the power of forward induction. In this example, despite the presence of multiple equilibria, forw...

Power Allocation Strategies for Fixed-Gain Half-Duplex Amplify-and-Forward Relaying in Nakagami-m Fading

KAUST Repository

Zafar, Ammar

2013-09-01

In this paper, we study power allocation strategies for a fixed-gain amplify-and-forward relay network employing multiple relays. We consider two optimization problems for the relay network: 1) maximizing the end-to-end signalto- noise ratio (SNR) and 2) minimizing the total power consumption while maintaining the end-to-end SNR over a threshold value. We investigate these two problems for two relaying protocols of all-participate (AP) relaying and selective relaying and two cases of feedback to the relays, full and limited. We show that the SNR maximization problem is concave and the power minimization problem is convex for all protocols and feedback cases considered. We obtain closed-form expressions for the two problems in the case of full feedback and solve the problems through convex programming for limited feedback. Numerical results show the benefit of having full feedback at the relays for both optimization problems. However, they also show that feedback overhead can be reduced by having only limited feedback to the relays with only a small degradation in performance.

Forward Modeling of Reduced Power Spectra from Three-dimensional k-space

Science.gov (United States)

von Papen, Michael; Saur, Joachim

2015-06-01

We present results from a numerical forward model to evaluate one-dimensional reduced power spectral densities (PSDs) from arbitrary energy distributions in {\\boldsymbol{k}} -space. In this model, we can separately calculate the diagonal elements of the spectral tensor for incompressible axisymmetric turbulence with vanishing helicity. Given a critically balanced turbulent cascade with {{k}\\parallel }∼ k\\bot α and α \\lt 1, we explore the implications on the reduced PSD as a function of frequency. The spectra are obtained under the assumption of Taylor’s hypothesis. We further investigate the functional dependence of the spectral index κ on the field-to-flow angle θ between plasma flow and background magnetic field from MHD to electron kinetic scales. We show that critically balanced turbulence asymptotically develops toward θ-independent spectra with a slope corresponding to the perpendicular cascade. This occurs at a transition frequency {{f}2D}(L,α ,θ ), which is analytically estimated and depends on outer scale L, critical balance exponent α, and field-to-flow angle θ. We discuss anisotropic damping terms acting on the {\\boldsymbol{k}} -space distribution of energy and their effects on the PSD. Further, we show that the spectral anisotropies κ (θ ) as found by Horbury et al. and Chen et al. in the solar wind are in accordance with a damped critically balanced cascade of kinetic Alfvén waves. We also model power spectra obtained by Papen et al. in Saturn’s plasma sheet and find that the change of spectral indices inside 9 {{R}s} can be explained by damping on electron scales.

Population morbidity in the Zaporizhzhia Nuclear Power Plant observation zone as an integral part of public health.

Science.gov (United States)

Khomenko, I M; Zakladna, N V; Orlova, N M

2017-12-01

To evaluate the health status of adult population living in the Ukrainian nuclear power industry obser vation zone on the example of Zaporizhzhia Nuclear Power Plant. System review, analytic, sociological survey and statistical methods. There was established an increase in the incidence of digestive diseases among adult population in Nikopol of Dnipropetrovsk region, which is included in the Zaporizhzhia NPP observation zone. The highest increase was observed in the incidence of peptic ulcer, gastritis and duodenitis, cholecystitis and cholangitis by 340 %, 305 % and 83 %, respectively. In connection with the residence in industrially developed region and NPP life extension in Ukraine, the possible influence of harmful factors on health status of the population of observation zones, an increase in the incidence of digestive diseases among adult population, there is required continuous monitoring and detailed study of public health. I. M. Khomenko, N. V. Zakladna, N. M. Orlova.

Going Forward with Genetics: Recent Technological Advances and Forward Genetics in Mice

OpenAIRE

Moresco, Eva Marie Y.; Li, Xiaohong; Beutler, Bruce

2013-01-01

Forward genetic analysis is an unbiased approach for identifying genes essential to defined biological phenomena. When applied to mice, it is one of the most powerful methods to facilitate understanding of the genetic basis of human biology and disease. The speed at which disease-causing mutations can be identified in mutagenized mice has been markedly increased by recent advances in DNA sequencing technology. Creating and analyzing mutant phenotypes may therefore become rate-limiting in forw...

Nuclear weapon-free zone, non-proliferation treaty and South Asia

International Nuclear Information System (INIS)

Jayaramu, P.S.

1980-01-01

Emergence of and the motivations behind the concept of nuclear weapon free zone, the conceptual linkage between the nuclear weapon free zone and the Non-Proliferation Treaty and the problems involved in the implementation of nuclear weapon free zone proposals put forward from time to time are discussed. Pakistan's proposal for a nuclear weapon free zone in South Asia, motivations behind the proposal, and India's response to it are examined. It is pointed out that both the NPT and nuclear weapon free zone indirectly grant a certain amount of legitimacy to the use of nuclear weapons. (M.G.B.)

On Optimal Input Design for Feed-forward Control

OpenAIRE

Hägg, Per; Wahlberg, Bo

2013-01-01

This paper considers optimal input design when the intended use of the identified model is to construct a feed-forward controller based on measurable disturbances. The objective is to find a minimum power excitation signal to be used in a system identification experiment, such that the corresponding model-based feed-forward controller guarantees, with a given probability, that the variance of the output signal is within given specifications. To start with, some low order model problems are an...

One-dimensional, forward-forward mean-field games with congestion

KAUST Repository

Gomes, Diogo A.; Sedjro, Marc

2017-01-01

forward-forward MFGs. Finally, we construct traveling-wave solutions, which settles in a negative way the convergence problem for forward-forward MFGs. A similar technique gives the existence of time-periodic solutions for non-monotonic MFGs.

Cross hedging and forward-contract pricing of electricity

International Nuclear Information System (INIS)

Woo, C.-K.; Hoang, K.; Horowitz, I.

2001-01-01

We consider the problem of an electric-power marketer offering a fixed-price forward contract to provide electricity that it purchases from a potentially volatile and unpredictable fledgling spot energy market. One option for the risk-averse marketer who wants to hedge against the spot-price volatility is to engage in cross hedging to reduce the contract's profit variance, and to determine the forward-contract price as a risk-adjusted price - the sum of a baseline price and a risk premium. We show how the marketer can estimate the spot-price relationship between two wholesale energy markets for the purpose of cross hedging, as well as the optimal hedge and the forward contract's baseline price and risk premium

Price formation in electricity forward markets and the relevance of systematic forecast errors

International Nuclear Information System (INIS)

Redl, Christian; Haas, Reinhard; Huber, Claus; Boehm, Bernhard

2009-01-01

Since the liberalisation of the European electricity sector, forward and futures contracts have gained significant interest of market participants due to risk management reasons. For pricing of these contracts an important fact concerns the non-storability of electricity. In this case, according to economic theory, forward prices are related to the expected spot prices which are built on fundamental market expectations. In the following article the crucial impact parameters of forward electricity prices and the relationship between forward and future spot prices will be assessed by an empirical analysis of electricity prices at the European Energy Exchange and the Nord Pool Power Exchange. In fact, price formation in the considered markets is influenced by historic spot market prices yielding a biased forecasting power of long-term contracts. Although market and risk assessment measures of market participants and supply and demand shocks can partly explain the futures-spot bias inefficiencies in the analysed forward markets cannot be ruled out. (author)

Ocular forward light scattering and corneal backward light scattering in patients with dry eye.

Science.gov (United States)

Koh, Shizuka; Maeda, Naoyuki; Ikeda, Chikako; Asonuma, Sanae; Mitamura, Hayato; Oie, Yoshinori; Soma, Takeshi; Tsujikawa, Motokazu; Kawasaki, Satoshi; Nishida, Kohji

2014-09-18

To evaluate ocular forward light scattering and corneal backward light scattering in patients with dry eye. Thirty-five eyes in 35 patients with dry eye and 20 eyes of 20 healthy control subjects were enrolled. The 35 dry eyes were classified into two groups according to whether superficial punctate keratopathy in the central 6-mm corneal zone (cSPK) was present or not. Ocular forward light scattering was quantified with a straylight meter. Corneal backward light scattering from the anterior, middle, and posterior corneal parts was assessed with a corneal densitometry program using the Scheimpflug imaging system. Both dry eye groups had significantly higher intraocular forward light scattering than the control group (both Pdry eye group with cSPK had significantly higher values in anterior and total corneal backward light scattering than the other two groups. Moderate positive correlations were observed between the cSPK score and corneal backward light scattering from the anterior cornea (R=0.60, Pdry eyes than in normal eyes. Increased corneal backward light scattering in dry eye at least partially results from cSPK overlying the optical zone. Copyright 2014 The Association for Research in Vision and Ophthalmology, Inc.

Theoretical analysis of recirculation zone and buffer zone in the ADS windowless spallation target

International Nuclear Information System (INIS)

Liu, Jie; Pan, Chang-zhao; Tong, Jian-fei; Lu, Wen-qiang

2015-01-01

Highlights: • Height of recirculation zone is very important in windowless target design. • A theoretical formula for the height is derived based on the Bernoulli equation. • Numerical simulation for the LBE is performed and the height of recirculation zone is also obtained. • The theoretically-derived simulation-predicted recirculation zone heights agree with each other very well and the theoretical derivation is proved to be correct. - Abstract: The thermo-hydraulic analysis including reduction of the height of recirculation zone and stability of the free surface is very important in the design and optimization of ADS windowless spallation targets. In the present study, the Bernoulli equation is used to analyze the entire flow process in the target. Formulae for the height of the recirculation zone and the buffer zone are both obtained explicitly. Furthermore, numerical simulation for the heavy metal lead–bismuth eutectic liquid and vapor with cavitation phase change is also performed, and a novel method to calculate the height of the recirculation zone is put forward. By comparison of the theoretical formulae and numerical results, it is clearly shown that they agree with each other very well, and the heights predicted by the two methods are both determined by their own upstream flow parameters

Analyzing Capacity Withholding in Oligopoly Electricity Markets Considering Forward Contracts and Demand Elasticity

Directory of Open Access Journals (Sweden)

S. Salarkheili

2011-12-01

Full Text Available In this paper capacity withholding in an oligopolistic electricity market that all Generation Companies (GenCos bid in a Cournot model is analyzed and the capacity withheld index, the capacity distortion index and the price distortion index are obtained and formulated. Then a new index, Distortion-Withheld Index (DWI, is proposed in order to measure the potential ability of market for capacity withholding. In these indices the impact of demand elasticity on capacity withholding is considered and it is shown that demand elasticity plays an important role for capacity withholding and market power mitigation. Due to the significant role of forward contracts for market power mitigation and risk hedging in power markets, the impacts of these contracts on capacity withholding are considered. The effects of GenCos’ strategic forward contracts on capacity withholding are also discussed. Moreover, the relationship between capacity withholding of GenCos and market price distortion is acquired. A two-settlement market including a forward market and a spot market is used to describe GenCos’ strategic forward contracting and spot market competition.

Formation conditions of uranium minerals in oxidation zone of uranium deposits

International Nuclear Information System (INIS)

Li Youzhu

2005-01-01

The paper concerns about the summary and classification of hydrothermal uranium deposit with oxidation zone. Based on the summary of observation results of forty uranium deposits located in CIS and Bulgaria which are of different sizes and industrial-genetic types, analysis on available published information concerning oxidation and uranium mineral enrichment in supergenic zone, oxidation zone classification of hydrothermal uranium had been put forward according to the general system of the exogenetic uranium concentration. (authors)

Forward and Spot Prices in Multi-Settlement Wholesale Electricity Markets

Science.gov (United States)

Larrieu, Jeremy

In organized wholesale electricity markets, power is sold competitively in a multi-unit multi-settlement single-price auction comprised of a forward and a spot market. This dissertation attempts to understand the structure of the forward premium in these markets, and to identify the factors that may lead forward and spot prices to converge or diverge. These markets are unique in that the forward demand is price-sensitive, while spot residual demand is perfectly inelastic and must be met in full, a crucial design feature the literature often glosses over. An important contribution of this dissertation is the explicit modeling of each market separately in order to understand how generation and load choose to act in each one, and the consequences of these actions on equilibrium prices and quantities given that firms maximize joint profits over both markets. In the first essay, I construct a two-settlement model of electricity prices in which firms that own asymmetric capacity-constrained units facing convex costs compete to meet demand from consumers, first in quantities, then in prices. I show that the forward premium depends on the costliness of spot production relative to firms' ability to exercise market power by setting quantities in the forward market. In the second essay, I test the model from the first essay with unit-level capacity and marginal cost data from the California Independent System Operator (CAISO). I show that the model closely replicates observed price formation in the CAISO. In the third essay, I estimate a time series model of the CAISO forward premium in order to measure the impact that virtual bidding has had on forward and spot price convergence in California between April 2009 and March 2014. I find virtual bidding to have caused forward and spot prices to diverge due to the large number of market participants looking to hedge against - or speculate on - the occurrence of infrequent but large spot price spikes by placing virtual demand bids.

Cross hedging and forward-contract pricing of electricity

Energy Technology Data Exchange (ETDEWEB)

Woo, C.-K.; Hoang, K. [Energy and Environmental Economics, Inc., 353 Sacramento Street, Suite 1700, 94111 San Francisco, CA (United States); Horowitz, I. [Decision and Information Sciences, Warrington College of Business Administration, University of Florida, 32611 Gainesville, FL (United States)

2001-01-01

We consider the problem of an electric-power marketer offering a fixed-price forward contract to provide electricity that it purchases from a potentially volatile and unpredictable fledgling spot energy market. One option for the risk-averse marketer who wants to hedge against the spot-price volatility is to engage in cross hedging to reduce the contract's profit variance, and to determine the forward-contract price as a risk-adjusted price - the sum of a baseline price and a risk premium. We show how the marketer can estimate the spot-price relationship between two wholesale energy markets for the purpose of cross hedging, as well as the optimal hedge and the forward contract's baseline price and risk premium.

One-dimensional, forward-forward mean-field games with congestion

KAUST Repository

Gomes, Diogo A.

2017-03-29

Here, we consider one-dimensional forward-forward mean-field games (MFGs) with congestion, which were introduced to approximate stationary MFGs. We use methods from the theory of conservation laws to examine the qualitative properties of these games. First, by computing Riemann invariants and corresponding invariant regions, we develop a method to prove lower bounds for the density. Next, by combining the lower bound with an entropy function, we prove the existence of global solutions for parabolic forward-forward MFGs. Finally, we construct traveling-wave solutions, which settles in a negative way the convergence problem for forward-forward MFGs. A similar technique gives the existence of time-periodic solutions for non-monotonic MFGs.

Risk zoning around nuclear power plants in comparison to other major hazardous industrial installations

International Nuclear Information System (INIS)

Kirchsteiger, Christian

2006-01-01

The background and current status of the information basis leading to the definition of risk and emergency zones around Nuclear Power Plants (NPPs) in different countries in Europe and beyond are analysed. Although dependable plant-specific Probabilistic Safety Assessment (PSA) of Level 2 and/or Level 3 could in principle provide sufficiently detailed input to define the geographical dimension of a NPP's risk and emergency zones, the analysis of the status in some European and other countries shows that other, 'deterministic' approaches using a Reference Accident are actually used in practice. Regarding use of Level 2 PSA for emergency planning, the approach so far has been to use the Level 2 PSA information retrospectively to provide the justification for the choice of Reference Accident(s) used to define the emergency plans and Emergency Planning Zones (EPZs). There are significant differences in the EPZs that are defined in different countries, ranging from about 1 km to 30 km. Further, there is a striking contrast in the extent of using probabilistic information to define emergency zones between the nuclear and other high risk industry sectors, such as the chemical process industry, and the reasons for these differences are not entirely clear, but seem to be more related to risk perception than actual risk potential. Finally, based on consensus discussions at a recent JRC/OECD International Seminar on Risk and Emergency Zoning around NPPs, recommendations are given in the areas of more comprehensive use of available risk information for risk zoning purposes, risk communication and comparative risk assessment. (author)

Running and Metabolic Demands of Elite Rugby Union Assessed Using Traditional, Metabolic Power, and Heart Rate Monitoring Methods

Directory of Open Access Journals (Sweden)

Romain Dubois, Thierry Paillard, Mark Lyons, David McGrath, Olivier Maurelli, Jacques Prioux

2017-03-01

Full Text Available The aims of this study were (1 to analyze elite rugby union game demands using 3 different approaches: traditional, metabolic and heart rate-based methods (2 to explore the relationship between these methods and (3 to explore positional differences between the backs and forwards players. Time motion analysis and game demands of fourteen professional players (24.1 ± 3.4 y, over 5 European challenge cup games, were analyzed. Thresholds of 14.4 km·h-1, 20 W.kg-1 and 85% of maximal heart rate (HRmax were set for high-intensity efforts across the three methods. The mean % of HRmax was 80.6 ± 4.3 % while 42.2 ± 16.5% of game time was spent above 85% of HRmax with no significant differences between the forwards and the backs. Our findings also show that the backs cover greater distances at high-speed than forwards (% difference: +35.2 ± 6.6%; p<0.01 while the forwards cover more distance than the backs (+26.8 ± 5.7%; p<0.05 in moderate-speed zone (10-14.4 km·h-1. However, no significant difference in high-metabolic power distance was found between the backs and forwards. Indeed, the high-metabolic power distances were greater than high-speed running distances of 24.8 ± 17.1% for the backs, and 53.4 ± 16.0% for the forwards with a significant difference (+29.6 ± 6.0% for the forwards; p<0.001 between the two groups. Nevertheless, nearly perfect correlations were found between the total distance assessed using the traditional approach and the metabolic power approach (r = 0.98. Furthermore, there is a strong association (r = 0.93 between the high-speed running distance (assessed using the traditional approach and the high-metabolic power distance. The HR monitoring methods demonstrate clearly the high physiological demands of professional rugby games. The traditional and the metabolic-power approaches shows a close correlation concerning their relative values, nevertheless the difference in absolute values especially for the high

Surface Wave Focusing and Acoustic Communications in the Surf Zone

National Research Council Canada - National Science Library

Preisig, James

2004-01-01

The forward scattering of acoustic signals off of shoaling surface gravity waves in the surf zone results in a time-varying channel impulse response that is characterized by intense, rapidly fluctuating arrivals...

Genetic dissection of mammalian ERAD through comparative haploid and CRISPR forward genetic screens

DEFF Research Database (Denmark)

Timms, Richard T.; Menzies, Sam A.; Tchasovnikarova, Iva A.

2016-01-01

The application of forward genetic screens to cultured human cells represents a powerful method to study gene function. The repurposing of the bacterial CRISPR/Cas9 system provides an effective method to disrupt gene function in mammalian cells, and has been applied to genome-wide screens. Here, we...... compare the efficacy of genome-wide CRISPR/Cas9-mediated forward genetic screens versus gene-trap mutagenesis screens in haploid human cells, which represent the existing ‘gold standard’ method. This head-to-head comparison aimed to identify genes required for the endoplasmic reticulum....../3-associated disulphide reductase. Genome-wide CRISPR/Cas9-mediated screens together with haploid genetic screens provide a powerful addition to the forward genetic toolbox....

Architecture of buried reverse fault zone in the sedimentary basin: A case study from the Hong-Che Fault Zone of the Junggar Basin

Science.gov (United States)

Liu, Yin; Wu, Kongyou; Wang, Xi; Liu, Bo; Guo, Jianxun; Du, Yannan

2017-12-01

It is widely accepted that the faults can act as the conduits or the barrier for oil and gas migration. Years of studies suggested that the internal architecture of a fault zone is complicated and composed of distinct components with different physical features, which can highly influence the migration of oil and gas along the fault. The field observation is the most useful methods of observing the fault zone architecture, however, in the petroleum exploration, what should be concerned is the buried faults in the sedimentary basin. Meanwhile, most of the studies put more attention on the strike-slip or normal faults, but the architecture of the reverse faults attracts less attention. In order to solve these questions, the Hong-Che Fault Zone in the northwest margin of the Junggar Basin, Xinjiang Province, is chosen for an example. Combining with the seismic data, well logs and drill core data, we put forward a comprehensive method to recognize the internal architectures of buried faults. High-precision seismic data reflect that the fault zone shows up as a disturbed seismic reflection belt. Four types of well logs, which are sensitive to the fractures, and a comprehensive discriminated parameter, named fault zone index are used in identifying the fault zone architecture. Drill core provides a direct way to identify different components of the fault zone, the fault core is composed of breccia, gouge, and serpentinized or foliated fault rocks and the damage zone develops multiphase of fractures, which are usually cemented. Based on the recognition results, we found that there is an obvious positive relationship between the width of the fault zone and the displacement, and the power-law relationship also exists between the width of the fault core and damage zone. The width of the damage zone in the hanging wall is not apparently larger than that in the footwall in the reverse fault, showing different characteristics with the normal fault. This study provides a

Effects of tool speeds and corresponding torque/energy on stir zone formation during friction stir welding/processing

International Nuclear Information System (INIS)

Cui, S; Chen, Z W

2009-01-01

The way processing parameters and the measurable thermomechanical responses relate to the individual and combined flows forming the different processed zones during friction stir welding/processing has been studied. Experimentally, a cast Al-7Si-0.3Mg alloy was used to provide readily identifiable processed zones. A series of friction stir experiments covering a wide range of tool forward and rotation speeds were conducted followed by the measurement of individual and combined stir areas. It has been found that the basic modes of material flow did not change but the relative volume of each flow depended on both forward and rotation speeds. The trends observed in the present data explain how pin rotation relates to the material transportation mechanism and the associated torque required. This data also explains how forward speed, not rotation speed, relates to specific energy and the volume of the total stir zone.

Forward osmosis applied to evaporative cooling make-up water

Energy Technology Data Exchange (ETDEWEB)

Nicoll, Peter; Thompson, Neil; Gray, Victoria [Modern Water plc, Guildford (United Kingdom)

2012-11-15

Modern Water is in the process of developing a number of forward osmosis based technologies, ranging from desalination to power generation. This paper outlines the progress made to date on the development and commercial deployment of a forward osmosis based process for the production of evaporative cooling tower make-up water from impaired water sources, including seawater. Evaporative cooling requires significant amounts of good quality water to replace the water lost by evaporation, drift and blowdown. This water can be provided by conventional desalination processes or by the use of tertiary treated sewage effluent. The conventional processes are well documented and understood in terms of operation and power consumption. A new process has been successfully developed and demonstrated that provides make-up water directly, using a core platform 'forward osmosis' technology. This new technology shows significant promise in allowing various raw water sources, such as seawater, to be used directly in the forward osmosis step, thus releasing the use of scarce and valuable high grade water for other more important uses. The paper presents theoretical and operational results for the process, where it is shown that the process can produce make-up water at a fraction of the operational expenditure when compared to conventional processes, in particular regarding power consumption, which in some cases may be as low as 15 % compared to competing processes. Chemical additives to the cooling water (osmotic agent) are retained within the process, thus reducing their overall consumption. Furthermore the chemistry of the cooling water does not support the growth of Legionella pneumophila. Corrosion results are also reported. (orig.)

An Operational Web-Based Indicator System for Integrated Coastal Zone Management

Directory of Open Access Journals (Sweden)

Henning Sten Hansen

2014-03-01

Full Text Available Coastal zones are under severe pressure from anthropogenic activities, as well as on-going climate change with associated sea level rise and increased storminess. These challenges call for integrated and forward looking solutions. The concept on Integrated Coastal Zone Management, as defined during the last twenty years, provides the overall policy frames, but tools to support the planning and management efforts are almost lacking. Furthermore, the forward-looking dimension to embrace the effects of climate change is nearly absent in most implementations. The BLAST project, financed by the European Union Regional Fund through the INTERREG IV North Sea Region Programme, aimed at developing a web-based decision support system to assist Integrated Coastal Zone Management from a climate change perspective, and the current paper describes the methods used and the computing platform for implementing a decision support system. The software applied in developing the system is mainly Open Source components, thus, facilitating a more widespread use of the system.

Numerically Optimized Uniformly Most Powerful Alphabets for Hierarchical-Decode-and-Forward Two-Way Relaying

Directory of Open Access Journals (Sweden)

M. Hekrdla

2011-01-01

Full Text Available We address the issue of the parametric performance of the Hierarchical-Decode-and-Forward (HDF strategy in a wireless 2-way relay channel. Promising HDF, representing the concept of wireless network coding, performs well with a pre-coding strategy that requires Channel State Information (CSI on the transceiver side. Assuming a practical case when CSI is available only on the receiver side and the channel conditions do not allow adaptive strategies, the parametrization causes significant HDF performance degradation for some modulation alphabets. Alphabets that are robust to the parametrization (denoted Uniformly Most Powerful (UMP have already been proposed restricting on the class of non-linear multi-dimensional frequency modulations. In this work, we focus on the general design of unrestricted UMP alphabets. We formulate an optimization problem which is solved by standard non-linear convex constrained optimization algorithms, particularly by Nelder-Mead global optimization search, which is further refined by the local interior-pointsmethod.

Moving Forward - Progress on Forward Detectors

CERN Multimedia

Grafstrom, P.

2006-01-01

You might have been sitting in some meeting hearing about the ATLAS forward detectors. Coming back to your office wanting to learn more you look in the ATLAS TDR’s and disappointingly you find nothing about forward detectors. The explanation is of course that the forward detectors are newcomers in the ATLAS detector arsenal. ATLAS is designed to measure high Pt particles with pseudo rapidities up to 5 which in terms of angles means angles bigger than one degree (0.8 degree to be more accurate). Particles produced with smaller angles close to the beam escape detection. The hole in the forward direction will now partly be filled. Several new detectors have recently been proposed. These detectors are designed for various luminosity measurements but they also have a physics potential in themselves. Closest to the IP there is LUCID (LUminosity measurement using Cerenkov Integrating Detector). LUCID comprises some 170 Cerenkov tubes sitting around the beam pipe at about 17 m away from the IP. The tubes are 1.5 ...

The Rotary Zone Thermal Cycler: A Low-Power System Enabling Automated Rapid PCR

Science.gov (United States)

Bartsch, Michael S.; Renzi, Ronald F.; Van de Vreugde, James L.; Kim, Hanyoup; Knight, Daniel L.; Sinha, Anupama; Branda, Steven S.; Patel, Kamlesh D.

2015-01-01

Advances in molecular biology, microfluidics, and laboratory automation continue to expand the accessibility and applicability of these methods beyond the confines of conventional, centralized laboratory facilities and into point of use roles in clinical, military, forensic, and field-deployed applications. As a result, there is a growing need to adapt the unit operations of molecular biology (e.g., aliquoting, centrifuging, mixing, and thermal cycling) to compact, portable, low-power, and automation-ready formats. Here we present one such adaptation, the rotary zone thermal cycler (RZTC), a novel wheel-based device capable of cycling up to four different fixed-temperature blocks into contact with a stationary 4-microliter capillary-bound sample to realize 1-3 second transitions with steady state heater power of less than 10 W. We demonstrate the utility of the RZTC for DNA amplification as part of a highly integrated rotary zone PCR (rzPCR) system that uses low-volume valves and syringe-based fluid handling to automate sample loading and unloading, thermal cycling, and between-run cleaning functionalities in a compact, modular form factor. In addition to characterizing the performance of the RZTC and the efficacy of different online cleaning protocols, we present preliminary results for rapid single-plex PCR, multiplex short tandem repeat (STR) amplification, and second strand cDNA synthesis. PMID:25826708

The rotary zone thermal cycler: a low-power system enabling automated rapid PCR.

Directory of Open Access Journals (Sweden)

Michael S Bartsch

Full Text Available Advances in molecular biology, microfluidics, and laboratory automation continue to expand the accessibility and applicability of these methods beyond the confines of conventional, centralized laboratory facilities and into point of use roles in clinical, military, forensic, and field-deployed applications. As a result, there is a growing need to adapt the unit operations of molecular biology (e.g., aliquoting, centrifuging, mixing, and thermal cycling to compact, portable, low-power, and automation-ready formats. Here we present one such adaptation, the rotary zone thermal cycler (RZTC, a novel wheel-based device capable of cycling up to four different fixed-temperature blocks into contact with a stationary 4-microliter capillary-bound sample to realize 1-3 second transitions with steady state heater power of less than 10 W. We demonstrate the utility of the RZTC for DNA amplification as part of a highly integrated rotary zone PCR (rzPCR system that uses low-volume valves and syringe-based fluid handling to automate sample loading and unloading, thermal cycling, and between-run cleaning functionalities in a compact, modular form factor. In addition to characterizing the performance of the RZTC and the efficacy of different online cleaning protocols, we present preliminary results for rapid single-plex PCR, multiplex short tandem repeat (STR amplification, and second strand cDNA synthesis.

Accounting Fundamentals and Variations of Stock Price: Forward Looking Information Inducement

OpenAIRE

Sumiyana, Sumiyana

2011-01-01

This study investigates a permanent issue about low association between accounting fundamentals and variations of stock prices. It induces not only historical accountingfundamentals, but also forward looking information. Investors consider forward looking information that enables them to predict potential future cash flow, increase predictive power, lessen mispricing error, increase information content and drives future price equilibrium. The accounting fundamentals are earnings yield, book v...

Zoning for Distributed Wind Power - Breaking Down Barriers: Preprint

Energy Technology Data Exchange (ETDEWEB)

Green, J.; Sagrillo, M.

2005-08-01

Zoning regulations for the use of small wind turbines vary from state to state and from one local jurisdiction to the next. This paper examines the zoning experiences of small wind turbine owners, options for local actions, and examples of state and federal limited preemption of local zoning authority as a means of promoting the implementation of new technologies.

Genetic effects of prolonged combined irradiation of laboratory animals in Chernobyl Atomic Power Plant alienation zone

International Nuclear Information System (INIS)

Savtsova, Z.D.; Vojejkova, Yi.M.; Dzhaman, N.Yi.; Yudyina, O.Yu.; Yindik, V.M.; Kovbasyuk, S.A.

2000-01-01

Prolonged combined (external and internal) irradiation of mice in the r zone of the Chernobyl Atomic Power Plant caused hereditary disturbances physiological defects in the posterity irrespective of the fact if one or both parents were irradiated. The most favourable indices were observed in F2 posterity of the both exposed parents

Amplify-and-forward relaying in wireless communications

CERN Document Server

Rodriguez, Leonardo Jimenez; Le-Ngoc, Tho

2015-01-01

This SpringerBrief explores the advantage of relaying techniques in addressing the increasing demand for high data rates and reliable services over the air. It demonstrates how to design cost-effective relay systems that provide high spectral efficiency and fully exploit the diversity of the relay channel. The brief covers advances in achievable rates, power allocation schemes, and error performance for half-duplex (HD) and full-duplex (FD) amplify-and-forward (AF) single-relay systems. The authors discuss the capacity and respective optimal power allocation for a wide range of HD protocols ov

Power, stability of power, and creativity

NARCIS (Netherlands)

Sligte, Daniel J.; de Dreu, Carsten K. W.; Nijstad, Bernard A.

Power hierarchies are an essential aspect of social organization, create stability and social order, and provide individuals with incentives to climb the hierarchical ladder. Extending previous work on power and creativity, we put forward that this relationship critically depends on both the

Power, stability of power, and creativity

NARCIS (Netherlands)

Sligte, D.J.; de Dreu, C.K.W.; Nijstad, B.A.

2011-01-01

Power hierarchies are an essential aspect of social organization, create stability and social order, and provide individuals with incentives to climb the hierarchical ladder. Extending previous work on power and creativity, we put forward that this relationship critically depends on both the

U.S. Forward Operating Base Applications of Nuclear Power

International Nuclear Information System (INIS)

Griffith, George W.

2015-01-01

This paper provides a high level overview of current nuclear power technology and the potential use of nuclear power at military bases. The size, power ranges, and applicability of nuclear power units for military base power are reviewed. Previous and current reactor projects are described to further define the potential for nuclear power for military power.

Mechanisms for efficient investments and optimal zones in regional power market

Directory of Open Access Journals (Sweden)

Andročec Ivan

2014-01-01

Full Text Available The paper is result of research different cross-border electricity trading mechanisms impact. Focus is on investments in generation and transmission power system facilities in regional market. Assumptions include efficient market coupling mechanism (with more bidding zones, use of additional investment indicators (like social welfare and congestion cost and security of supply issues (capacity mechanisms. There is discussion on cost benefits analysis for particular market participants and there is possibility of risk reduction for regional power system expansion. It is shown current state-of-the-art, problems and trends in solving some aspects of market integration and investment issues. In some cases smaller and well defined bidding areas are absolutely essential in order to ensure system security and economic efficiency. There is no single criterion for power system expansion but it is possible to use combination of incentive schemes and possible through one index for cross-border trade. Risk management for cross-border electricity trading through several areas needs to be upgraded with use of financial transmission rights like weighted average area prices, respectively. Regional power system security is closely associated with timely investments in energy supply in line with economic development and environmental needs. Security of supply indicator is deriving an estimation of security of supply improvement from the market based simulation results when a generation or transmission investment project is implemented. All researched makes market integration and investments in Europe more efficient and gives more correct signals to market participants in regional market.

USAID Forward

Data.gov (United States)

US Agency for International Development — The USAID Forward reform initiative ran from 2010-2016. USAID Forward improved the way that the Agency delivers foreign assistance by embracing new partnerships,...

Adaptive feed forward in the LANL RF control system

International Nuclear Information System (INIS)

Ziomek, C.D.

1992-01-01

This paper describes an adaptive feed forward system that corrects repetitive errors in the amplitude and phase of the RF field of a pulsed accelerator. High-frequency disturbances that are beyond the effective bandwidth of the RF-field feedback control system can be eliminated with a feed forward system. Many RF-field disturbances for a pulsed accelerator are repetitive, occurring at the same relative time in every pulse. This design employs digital signal processing hardware to adaptively determine and track the control signals required to eliminate the repetitive errors in the feedback control system. In order to provide the necessary high-frequency response, the adaptive feed forward hardware provides the calculated control signal prior to the repetitive disturbance that it corrects. This system has been demonstrated to reduce the transient disturbances caused by beam pulses. Furthermore, it has been shown to negate high-frequency phase and amplitude oscillations in a high-power klystron amplifier caused by PFN ripple on the high-voltage. The design and results of the adaptive feed forward system are presented. (Author) 3 figs., 2 refs

EVALUATION OF FORWARDER WOOD EXTRACTION COST OF OPERATION

Directory of Open Access Journals (Sweden)

Larissa Nunes dos Santos

2016-03-01

Full Text Available The objective of this study was to determine the costs of the activity of timber extraction done by forwarders until approximately 30,000 work hours. We used 7 John Deere forwarders, model 1710D with 160 kW engine power. A database provided by a forestry company located in the state of Minas Gerais was used, containing all the information necessary for calculating the operating cost of the machines and for the subsequent sensitivity analysis. The operating cost was obtained by the sum of the fixed and variable costs. For the sensitivity analysis a variation ± 20% of the most representative elements of the total cost of the machine was performed. The result obtained for the average operating cost of the forwarder was US$ 147.80 h-1. Costs for repairs and maintenance, labor, fuel, and depreciation represented approximately 90% of the total cost of the machine. A 10% reduction in their values resulted in a savings of approximately 9% in all years evaluated.

A study of optimization problem for amplify-and-forward relaying over weibull fading channels

KAUST Repository

Ikki, Salama Said; Aissa, Sonia

2010-01-01

This paper addresses the power allocation and relay positioning problems in amplify-and-forward cooperative networks operating in Weibull fading environments. We study adaptive power allocation (PA) with fixed relay location, optimal relay location

Modelling and developing a decision-making process of hazard zone identification in ship power plants

International Nuclear Information System (INIS)

Podsiadlo, Antoni; Tarelko, Wieslaw

2006-01-01

The most dangerous places in ships are their power plants. Particularly, they are very unsafe for operators carried out various necessary operation and maintenance activities. For this reason, ship machinery should be designed to ensure the maximum safety for its operators. It is a very difficult task. Therefore, it could not be solved by means of conventional design methods, which are used for design of uncomplicated technical equipment. One of the possible ways of solving this problem is to provide appropriate tools, which allow us to take the operator's safety into account during a design process, especially at its early stages. A computer-aided system supporting design of safe ship power plants could be such a tool. This paper deals with developing process of a prototype of the computer-aided system for hazard zone identification in ship power plants

Modelling and developing a decision-making process of hazard zone identification in ship power plants

Energy Technology Data Exchange (ETDEWEB)

Podsiadlo, Antoni [Department of Engineering Sciences, Gdynia Maritime University, ul. Morska 83, 81-225 Gdynia (Poland)]. E-mail: topo@am.gdynia.pl; Tarelko, Wieslaw [Department of Engineering Sciences, Gdynia Maritime University, ul. Morska 83, 81-225 Gdynia (Poland)]. E-mail: tar@am.gdynia.pl

2006-04-15

The most dangerous places in ships are their power plants. Particularly, they are very unsafe for operators carried out various necessary operation and maintenance activities. For this reason, ship machinery should be designed to ensure the maximum safety for its operators. It is a very difficult task. Therefore, it could not be solved by means of conventional design methods, which are used for design of uncomplicated technical equipment. One of the possible ways of solving this problem is to provide appropriate tools, which allow us to take the operator's safety into account during a design process, especially at its early stages. A computer-aided system supporting design of safe ship power plants could be such a tool. This paper deals with developing process of a prototype of the computer-aided system for hazard zone identification in ship power plants.

Hygienic assessment of asbestos containing dust in the air of the working zone at thermal power plants

Directory of Open Access Journals (Sweden)

Moshkovskiy V.E.

2016-09-01

Full Text Available Asbestos and artificial mineral fibers were used actively at thermal power plants (TPP as heat insulation of pipes, seal plates, electrical insulation, etc. But content of asbestos fibers in the air of working zone at TPP was not registered to date. Therefore, aim of the work was to assess asbestos containing dust in the air of working zone at steam turbine and gas turbine TPP in the east region of the country. It was found that old insulation at TPP is mixture of asbestoses that contains chrysotile asbestos and traces of amphibole asbestoses – crocidolite and anthophyllite. In the majority of investigated workplaces at the steam turbine TPP significant dust generation with exceed of maximum one-time exposure limits (2 mg/m3 was observed. Concentration of respirable fibers in the air of working zone in all workplaces did not exceed actual hygienic standard (1 fiber/cm3.

Nigeria nuclear power generation programme: Suggested way forward

International Nuclear Information System (INIS)

Adesanmi, C.A.

2007-01-01

It has now been established worldwide that nuclear power generation is needed to meet growing energy demands. The gases emitted from fossil fuel have serious adverse effects on the environment. The message from the 50th Annual General Conference of the International Atomic Energy Agency (IAEA) held in Vienna, September 2006 was very clear on this issue. There was a unanimous support for more nuclear power generation to meet the world energy demand. All the member states that can afford the nuclear power technology and willing to abide by the international regulations and safeguards were encouraged to do so. The requirements to participate in the nuclear power generation programme are political will and organized diplomacy, legislative and statutory framework, international safety obligations, institutional framework, public acceptability, capacity building and technology transfer, environmental concern , waste management and financing. Nigeria's performance on all the criteria was evaluated and found satisfactory. All these coupled with Nigeria's dire need for more power and better energy mix, are sufficient and undisputable reasons for the whole world to support Nigeria nuclear power generation programme. Definitely the programme poses serious challenges to the Nigerian Physicists. Therefore, Departments of Physics should endeavour to include nuclear physics option in their programme and work in collaboration with the faculty of Engineering in their various tertiary institutions in order to attain the necessary critical human capacity that will be needed to man the nuclear power industry within the next 10 years

Reflected Light from Giant Planets in Habitable Zones: Tapping into the Power of the Cross-Correlation Function.

Science.gov (United States)

Martins, J H C; Santos, N C; Figueira, P; Melo, C

2016-11-01

The direct detection of reflected light from exoplanets is an excellent probe for the characterization of their atmospheres. The greatest challenge for this task is the low planet-to-star flux ratio, which even in the most favourable case is of the order of 10 -4 in the optical. This ratio decreases even more for planets in their host's habitable zone, typically lower than 10 -7 . To reach the signal-to-noise level required for such detections, we propose to unleash the power of the Cross Correlation Function in combination with the collecting power of next generation observing facilities. The technique we propose has already yielded positive results by detecting the reflected spectral signature of 51 Pegasi b (see Martins et al. 2015). In this work, we attempted to infer the number of hours required for the detection of several planets in their host's habitable zone using the aforementioned technique from theoretical EELT observations. Our results show that for 5 of the selected planets it should be possible to directly recover their reflected spectral signature.

Forward optical glory

International Nuclear Information System (INIS)

Nussenzveig, H.M.

Forward optical glory effects in Mie scattering are displayed here for the first time. These effects include regular oscillations in Mie efficiency factors and characteristic deviations from zero polarization in near-forward scattering which are observable for real refractive indices near √2 and 2. Complex angular momentum theory predicts the period of oscillation correctly and shows the important role played by surface waves with shortcuts through the sphere. three possible types of experiments for detecting the forward glory are proposed, involving measurements of extinction, radiation pressure, and polarization in near-forward scattering. (Author) [pt

Small-Scale Surf Zone Geometric Roughness

Science.gov (United States)

2017-12-01

using stereo imagery techniques. A waterproof two- camera system with self-logging and internal power was developed using commercial-off-the-shelf...estimates. 14. SUBJECT TERMS surface roughness, nearshore, aerodynamic roughness, surf zone, structure from motion, 3D imagery 15. NUMBER OF... power was developed using commercial-off-the- shelf components and commercial software for operations 1m above the sea surface within the surf zone

FPS-RAM: Fast Prefix Search RAM-Based Hardware for Forwarding Engine

Science.gov (United States)

Zaitsu, Kazuya; Yamamoto, Koji; Kuroda, Yasuto; Inoue, Kazunari; Ata, Shingo; Oka, Ikuo

Ternary content addressable memory (TCAM) is becoming very popular for designing high-throughput forwarding engines on routers. However, TCAM has potential problems in terms of hardware and power costs, which limits its ability to deploy large amounts of capacity in IP routers. In this paper, we propose new hardware architecture for fast forwarding engines, called fast prefix search RAM-based hardware (FPS-RAM). We designed FPS-RAM hardware with the intent of maintaining the same search performance and physical user interface as TCAM because our objective is to replace the TCAM in the market. Our RAM-based hardware architecture is completely different from that of TCAM and has dramatically reduced the costs and power consumption to 62% and 52%, respectively. We implemented FPS-RAM on an FPGA to examine its lookup operation.

The economic analysis of power market architectures: application to real-time market design

International Nuclear Information System (INIS)

Saguan, M.

2007-04-01

This work contributes to the economic analysis of power market architectures. A modular framework is used to separate problems of market design in different modules. The work's goal is to study real-time market design. A two-stage market equilibrium model is used to analyse the two main real-time designs: the 'market' and the 'mechanism' (with penalty). Numerical simulations show that design applied in real-time is not neutral vis-a-vis of energy markets sequence and the competition dynamic. Designs using penalty (mechanisms) cause distortions, inefficiencies and can create barriers to entry. The size of distortions is given by the temporal position of the gate that closure the forward markets. This model has also allowed us to show the key role of real-time integration between zones and the importance of good harmonization between real-time designs of each zone. (author)

Estimation of CANDU reactor zone controller level by generalized perturbation method

International Nuclear Information System (INIS)

Kim, Do Heon; Kim, Jong Kyung; Choi, Hang Bok; Roh, Gyu Hong; Yang, Won Sik

1998-01-01

The zone controller level change due to refueling operation has been studied using a generalized perturbation method. The generalized perturbation method provides sensitivity of zone power to individual refueling operation and incremental change of zone controller level. By constructing a system equation for each zone power, the zone controller level change was obtained. The details and a proposed model for future work are described

Interference-Based Decode and Forward Scheme Using Relay Nodes in Heterogeneous Networks

Directory of Open Access Journals (Sweden)

Kentaro Nishimori

2012-01-01

Full Text Available This paper proposes interference-based decode and forward scheme that utilizes relay stations (RSs. In Long-Term-Evolution (LTE- Advanced, heterogeneous networks in which femto- and picocells are overlaid onto macrocells are extensively discussed. However, interference between macro- and pico(femtocells arises due to their different transmit power levels. Unlike conventional cooperative transmission schemes, the RS decodes interference in the first transmit timing period and forwards it to the user equipment (UE in the second period. Moreover, cooperative transmission can be achieved without stopping the transmission from the base station (BS to UE when forwarding the interference from the RS to the UE by utilizing the fact that signal-to-noise power ratio (SNR between the RS and UE is much greater than that between the BS and UE. The basic performance of the proposed method is shown based on computer simulation. Moreover, the interference temperature and shadowing effect are measured when considering the coexistence between macro- and femtocells, and the performance of the proposed method is verified using measured shadowing effect.

Rf-to-dc power converters for wireless powering

KAUST Repository

Ouda, Mahmoud Hamdy

2016-12-01

Various examples are provided related to radio frequency (RF) to direct current (DC) power conversion. In one example, a RF-to-DC converter includes a fully cross-coupled rectification circuit including a pair of forward rectifying transistors and a feedback circuit configured to provide feedback bias signals to gates of the pair of forward rectifying transistors via feedback branch elements. In another example, a method includes receiving a radio frequency (RF) signal; rectifying the RF signal via a fully cross-coupled rectification circuit including a pair of forward rectifying transistors; and providing a DC output voltage from an output connection of the fully cross-coupled rectification circuit, where gating of the pair of forward rectifying transistors is controlled by feedback bias signals provided to gates of the pair of forward rectifying transistors via feedback branch elements.

Integration and shock transmissions across European electricity forward markets

International Nuclear Information System (INIS)

Bunn, Derek W.; Gianfreda, Angelica

2010-01-01

New results are presented relating to the integration of the French, German, British, Dutch and Spanish power markets at day-ahead, week-ahead, one month-ahead and two month-ahead lead times. Overall, there is evidence of market integration, increasing over time, despite an underlying inefficiency in each market with respect to the forward and spot price convergence. The spatial analysis, on a financial dimension, is undertaken using causality tests, cointegration and impulse-response techniques, for both price levels and volatilities. In general we find less influence of the size and proximity of neighbouring markets than other studies, more integration at baseload than peak, and, surprisingly, less integration in forwards than spot prices. (author)

The futures and forward price differential in the Nordic electricity market

Energy Technology Data Exchange (ETDEWEB)

Wimschulte, Jens [University of Regensburg (Germany)

2010-08-15

This note investigates price differentials between electricity forwards and portfolios of short-term futures with identical delivery periods at the Nordic Power Exchange (Nord Pool). Since both contracts are traded at the same exchange, there is no influence of, for example, different market microstructure and default risk when examining the effect of the marking-to-market of futures on the price differential. Although the prices of the futures portfolios are, on average, below the corresponding forward prices, these price differentials are, on average, not statistically significant and not economically significant when taking transaction costs into account. Given the characteristics of the electricity contracts under observation, this is consistent with the predictions of the model and indicates efficient pricing in the Nord Pool forward market in contrast to previous results. (author)

The futures and forward price differential in the Nordic electricity market

International Nuclear Information System (INIS)

Wimschulte, Jens

2010-01-01

This note investigates price differentials between electricity forwards and portfolios of short-term futures with identical delivery periods at the Nordic Power Exchange (Nord Pool). Since both contracts are traded at the same exchange, there is no influence of, for example, different market microstructure and default risk when examining the effect of the marking-to-market of futures on the price differential. Although the prices of the futures portfolios are, on average, below the corresponding forward prices, these price differentials are, on average, not statistically significant and not economically significant when taking transaction costs into account. Given the characteristics of the electricity contracts under observation, this is consistent with the predictions of the model and indicates efficient pricing in the Nord Pool forward market in contrast to previous results. (author)

SLiM 2: Flexible, Interactive Forward Genetic Simulations.

Science.gov (United States)

Haller, Benjamin C; Messer, Philipp W

2017-01-01

Modern population genomic datasets hold immense promise for revealing the evolutionary processes operating in natural populations, but a crucial prerequisite for this goal is the ability to model realistic evolutionary scenarios and predict their expected patterns in genomic data. To that end, we present SLiM 2: an evolutionary simulation framework that combines a powerful, fast engine for forward population genetic simulations with the capability of modeling a wide variety of complex evolutionary scenarios. SLiM achieves this flexibility through scriptability, which provides control over most aspects of the simulated evolutionary scenarios with a simple R-like scripting language called Eidos. An example SLiM simulation is presented to illustrate the power of this approach. SLiM 2 also includes a graphical user interface for simulation construction, interactive runtime control, and dynamic visualization of simulation output, facilitating easy and fast model development with quick prototyping and visual debugging. We conclude with a performance comparison between SLiM and two other popular forward genetic simulation packages. © The Author 2016. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Characteristic of lipid metabolism and state of free-radical processes in workers of 30-km alienation zone at Chernobyl Atomic Power Plant

International Nuclear Information System (INIS)

Chayalo, P.P.; Chobot'ko, G.M.; Palamar, L.A.; Kolesnik, L.L.; Kuznetsov, G.P.

1997-01-01

The study involved 54 men aged 35-50 working in 30 km alienation zone at the Chernobyl Atomic Power Plant. Blood serum and erythrocyte lipid peroxidation indices were estimated. Investigation of peroxidation processes in the erythrocytes allowed to reveal changes in glutation system, they being characterized by its amount elevation against the background of glutation transferase activity increase both in the persons, working in the 30 km zone, and in those from 'Ukryttia' Establishment

Investigating transfer gate potential barrier by feed-forward effect measurement

NARCIS (Netherlands)

Xu, Y.; Ge, X.; Theuwissen, A.J.P.

2015-01-01

In a 4T pixel, the transfer gate (TG) “OFF” surface potential is one of the important parameters, which determines the pinned photodiode (PPD) full well capacity. The feed-forward effect measurement is a powerful tool to characterize the relationship of the PPD injection potential and the

Deep convolutional neural network processing of aerial stereo imagery to monitor vulnerable zones near power lines

Science.gov (United States)

Qayyum, Abdul; Saad, Naufal M.; Kamel, Nidal; Malik, Aamir Saeed

2018-01-01

The monitoring of vegetation near high-voltage transmission power lines and poles is tedious. Blackouts present a huge challenge to power distribution companies and often occur due to tree growth in hilly and rural areas. There are numerous methods of monitoring hazardous overgrowth that are expensive and time-consuming. Accurate estimation of tree and vegetation heights near power poles can prevent the disruption of power transmission in vulnerable zones. This paper presents a cost-effective approach based on a convolutional neural network (CNN) algorithm to compute the height (depth maps) of objects proximal to power poles and transmission lines. The proposed CNN extracts and classifies features by employing convolutional pooling inputs to fully connected data layers that capture prominent features from stereo image patches. Unmanned aerial vehicle or satellite stereo image datasets can thus provide a feasible and cost-effective approach that identifies threat levels based on height and distance estimations of hazardous vegetation and other objects. Results were compared with extant disparity map estimation techniques, such as graph cut, dynamic programming, belief propagation, and area-based methods. The proposed method achieved an accuracy rate of 90%.

Forward tracking detectors

Indian Academy of Sciences (India)

Abstract. Forward tracking is an essential part of a detector at the international linear collider (ILC). The requirements for forward tracking are explained and the proposed solutions in the detector concepts are shown.

Characteristics of Plantar Loads in Maximum Forward Lunge Tasks in Badminton.

Science.gov (United States)

Hu, Xiaoyue; Li, Jing Xian; Hong, Youlian; Wang, Lin

2015-01-01

Badminton players often perform powerful and long-distance lunges during such competitive matches. The objective of this study is to compare the plantar loads of three one-step maximum forward lunges in badminton. Fifteen right-handed male badminton players participated in the study. Each participant performed five successful maximum lunges at three directions. For each direction, the participant wore three different shoe brands. Plantar loading, including peak pressure, maximum force, and contact area, was measured by using an insole pressure measurement system. Two-way ANOVA with repeated measures was employed to determine the effects of the different lunge directions and different shoes, as well as the interaction of these two variables, on the measurements. The maximum force (MF) on the lateral midfoot was lower when performing left-forward lunges than when performing front-forward lunges (p = 0.006, 95% CI = -2.88 to -0.04%BW). The MF and peak pressures (PP) on the great toe region were lower for the front-forward lunge than for the right-forward lunge (MF, p = 0.047, 95% CI = -3.62 to -0.02%BW; PP, p = 0.048, 95% CI = -37.63 to -0.16 KPa) and left-forward lunge (MF, p = 0.015, 95% CI = -4.39 to -0.38%BW; PP, p = 0.008, 95% CI = -47.76 to -5.91 KPa). These findings indicate that compared with the front-forward lunge, left and right maximum forward lunges induce greater plantar loads on the great toe region of the dominant leg of badminton players. The differences in the plantar loads of the different lunge directions may be potential risks for injuries to the lower extremities of badminton players.

Zoning of highway flood-triggering environment for highway in Fuling District, Chongqing

Science.gov (United States)

Qin, Qing-mei; Tang, Hong-mei; Chen, Hong-kai

2011-10-01

Based on the geological environment about Fuling district in Chongqing city, eight evaluating indicators on road flooding subsequently environment along the highway: geological disasters developmental condition, rainstorm intensity, flood frequency, landform condition, litho-logical condition, average annual rainfall, vegetation coverage and geological structure, have been chosen. Adopting expert system to double evaluation and using the analysis hierarchy process to confirm the weight of index, accordingly, the mathematical model of evaluation on subsequently environment is put forward. On the support of GIS, grid subsequently environmental index and township administrative division subsequently environmental index, subsequently environment is divided into 4 degrees. They are dangerous zone, high susceptible zone, middle susceptible zone and low susceptible zone of the floods subsequently environment around highway. The results of the study indicate that in the total area, dangerous zone, high susceptible zone, middle susceptible zone and low susceptible zone of road flooding are 11.89%, 41.65%, 32.20% and 14.26% respectively. The results provide some significant scientific evidence for the further risk evaluation of road flooding.

Forward Jets and Forward-Central Jets at CMS

CERN Document Server

INSPIRE-00176215

2012-01-01

We report on cross section measurements for inclusive forward jet production and for the simultaneous production of a forward and a central jet in sqrt{s} = 7 TeV pp-collisions. Data collected in 2010, corresponding to an integrated luminosity of 3.14 pb^{-1}, is used for the measurements. Jets in the transverse momentum range pT = 35 - 140 GeV/c are reconstructed with the anti-kT (R = 0.5) algorithm. The extended coverage of large pseudo-rapidities is provided by the Hadronic Forward calorimeter (3.2 < \\eta < 4.7), while central jets are limited to \\eta < 2.8, covered by the main detector components. The two differential cross sections are presented as a function of the jet transverse momentum. Comparisons to next-to-leading order perturbative calculations, and predictions from event generators based on different parton showering mechanisms (PYTHIA and HERWIG) and parton dynamics (CASCADE) are shown.

Study of probing beam enlargement due to forward-scattering under low wavenumber turbulence using a FDTD full-wave code

Energy Technology Data Exchange (ETDEWEB)

Silva, F. da [Associao EURATOM/IST, IPFN-LA, Instituto Superor Tecnico, Lisbon (Portugal); Heuraux, S. [Institut Jean Lamour, CNRS-Nancy-Universite, BP70239, Vandoeuvre-les-Nancy (France); Gusakov, E.; Popov, A. [Ioffe Institute, Polytekhnicheskaya, St Petersburg (Russian Federation)

2011-07-01

Forward-scattering under high level of turbulence or long propagation paths can induce significant effects, as predicted by theory, and impose a signature on the Doppler reflectometry response. Simulations using a FDTD (finite-difference time-domain) full-wave code have confirmed the main dependencies and general behavior described by theory but display a returned RMS power, at moderate amplitudes, half of the one predicted by theory due to the impossibility to reach the numerical requirements needed to describe the small wavenumber spectrum with the wanted accuracy.One justifying factor may be due to the splitting and enlargement of the probing beam. At high turbulence levels, the scattered power returning to the antenna is higher than the predicted by the theory probably due to the scattered zone being closer than the oblique cutoff. This loss of coherence of the wavefront induces a beam spreading, which is also responsible for a diminution of the wavenumber resolution. With a FDTD full-wave code we study the behavior of the probing beam under several amplitude levels of low wavenumber plasma turbulence, using long temporal simulations series to ensure statistical accuracy. (authors)

Development of Pipeline Database and CAD Model for Selection of Core Security Zone in Nuclear Power Plants

International Nuclear Information System (INIS)

Choi, Seong Soo; Kwon, Tae Gyun; Baek, Hun Hyun; Kwon, Min Jin

2008-07-01

The objective of the project is to develop the pipeline database which can be used for selection of core security zones considering safety significance of pipes and to develop CAD model for 3-dimensional visualization of core security zones, for the purpose of minimizing damage and loss, enforcing security and protection on important facilities, and improving plant design preparing against emergency situations such as physical terrors in nuclear power plants. In this study, the pipeline database is developed for selection of core security zones considering safety significance of safety class 1 and 2 pipes. The database includes the information on 'pipe-room information-surrogate component' mapping, initiating events which may occur and accident mitigation functions which may be damaged by the pipe failure, and the drawing information related to 2,270 pipe segments of 30 systems. For the 3-dimensional visualization of core security zones, the CAD models on the containment building and the auxiliary building are developed using 3-D MAX tool and the demo program which can visualize the direct-X model converted from the 3-D MAX model is also developed. In addition to this, the coordinate information of all the buildings and their rooms is generated using AUTO CAD tool in order to be used as an input for 3-dimensional browsing of the VIP program

Markets and pricing for interruptible electric power

International Nuclear Information System (INIS)

Gedra, T.W.; Varaiya, P.P.

1993-01-01

The authors propose a market for interruptible, or callable, forward contracts for electric power, in which the consumer grants the power supplier the right to interrupt a given unit of load in return for a price discount. The callable forward contracts are traded continuously until the time of use. This allows recourse for those customers with uncertain demand, while risk-averse consumers can minimize their price risk by purchasing early. Callable forward contracts are simple in form, and can be directly incorporated into the utility's economic dispatch procedure

Characteristics of Plantar Loads in Maximum Forward Lunge Tasks in Badminton.

Directory of Open Access Journals (Sweden)

Xiaoyue Hu

Full Text Available Badminton players often perform powerful and long-distance lunges during such competitive matches. The objective of this study is to compare the plantar loads of three one-step maximum forward lunges in badminton.Fifteen right-handed male badminton players participated in the study. Each participant performed five successful maximum lunges at three directions. For each direction, the participant wore three different shoe brands. Plantar loading, including peak pressure, maximum force, and contact area, was measured by using an insole pressure measurement system. Two-way ANOVA with repeated measures was employed to determine the effects of the different lunge directions and different shoes, as well as the interaction of these two variables, on the measurements.The maximum force (MF on the lateral midfoot was lower when performing left-forward lunges than when performing front-forward lunges (p = 0.006, 95% CI = -2.88 to -0.04%BW. The MF and peak pressures (PP on the great toe region were lower for the front-forward lunge than for the right-forward lunge (MF, p = 0.047, 95% CI = -3.62 to -0.02%BW; PP, p = 0.048, 95% CI = -37.63 to -0.16 KPa and left-forward lunge (MF, p = 0.015, 95% CI = -4.39 to -0.38%BW; PP, p = 0.008, 95% CI = -47.76 to -5.91 KPa.These findings indicate that compared with the front-forward lunge, left and right maximum forward lunges induce greater plantar loads on the great toe region of the dominant leg of badminton players. The differences in the plantar loads of the different lunge directions may be potential risks for injuries to the lower extremities of badminton players.

Long Maturity Forward Rates

DEFF Research Database (Denmark)

Christiansen, Charlotte

2001-01-01

The paper aims to improve the knowledge of the empirical properties of the long maturity region of the forward rate curve. Firstly, the theoretical negative correlation between the slope at the long end of the forward rate curve and the term structure variance is recovered empirically and found...... to be statistically significant. Secondly, the expectations hypothesis is analyzed for the long maturity region of the forward rate curve using "forward rate" regressions. The expectations hypothesis is numerically close to being accepted but is statistically rejected. The findings provide mixed support...... for the affine term structure model....

A viscoplastic shear-zone model for episodic slow slip events in oceanic subduction zones

Science.gov (United States)

Yin, A.; Meng, L.

2016-12-01

Episodic slow slip events occur widely along oceanic subduction zones at the brittle-ductile transition depths ( 20-50 km). Although efforts have been devoted to unravel their mechanical origins, it remains unclear about the physical controls on the wide range of their recurrence intervals and slip durations. In this study we present a simple mechanical model that attempts to account for the observed temporal evolution of slow slip events. In our model we assume that slow slip events occur in a viscoplastic shear zone (i.e., Bingham material), which has an upper static and a lower dynamic plastic yield strength. We further assume that the hanging wall deformation is approximated as an elastic spring. We envision the shear zone to be initially locked during forward/landward motion but is subsequently unlocked when the elastic and gravity-induced stress exceeds the static yield strength of the shear zone. This leads to backward/trenchward motion damped by viscous shear-zone deformation. As the elastic spring progressively loosens, the hanging wall velocity evolves with time and the viscous shear stress eventually reaches the dynamic yield strength. This is followed by the termination of the trenchward motion when the elastic stress is balanced by the dynamic yield strength of the shear zone and the gravity. In order to account for the zig-saw slip-history pattern of typical repeated slow slip events, we assume that the shear zone progressively strengthens after each slow slip cycle, possibly caused by dilatancy as commonly assumed or by progressive fault healing through solution-transport mechanisms. We quantify our conceptual model by obtaining simple analytical solutions. Our model results suggest that the duration of the landward motion increases with the down-dip length and the static yield strength of the shear zone, but decreases with the ambient loading velocity and the elastic modulus of the hanging wall. The duration of the backward/trenchward motion depends

Gene expression analyses of the small intestine of pigs in the ex-evacuation zone of the Fukushima Daiichi Nuclear Power Plant.

Science.gov (United States)

Morimoto, Motoko; Kato, Ayaka; Kobayashi, Jin; Okuda, Kei; Kuwahara, Yoshikazu; Kino, Yasushi; Abe, Yasuyuki; Sekine, Tsutomu; Fukuda, Tomokazu; Isogai, Emiko; Fukumoto, Manabu

2017-11-15

After the accident at the Fukushima Daiichi Nuclear Power Plant, radioactive contaminants were released over a widespread area. Monitoring the biological effects of radiation exposure in animals in the ex-evacuation zone should be continued to understand the health effects of radiation exposure in humans. The present study aimed to clarify the effects of radiation by investigating whether there is any alteration in the morphology and gene expressions of immune molecules in the intestine of pigs and inobuta (wild boar and domestic pig hybrid) in the ex-evacuation zone in 2012. Gene expression analysis was performed in small intestine samples from pigs, which were collected from January to February 2012, in the ex-evacuation zone. Pigs lived freely in this zone, and their small intestine was considered to be affected by the dietary intake of radioactive contaminants. Several genes were selected by microarray analysis for further investigation using real-time polymerase chain reaction. IFN-γ, which is an important inflammatory cytokine, and TLR3, which is a pattern recognize receptor for innate immune system genes, were highly elevated in these pigs. The expressions of the genes of these proteins were associated with the radiation level in the muscles. We also examined the alteration of gene expressions in wild boars 5 years after the disaster. The expression of IFN-γ and TLR3 remained high, and that of Cyclin G1, which is important in the cell cycle, was elevated. We demonstrated that some changes in gene expression occurred in the small intestine of animals in the ex-evacuation zone after radiation. It is difficult to conclude that these alterations are caused by only artificial radionuclides from the Fukushima Daiichi Nuclear Power Plant. However, the animals in the ex-evacuation zone might have experienced some changes owing to radioactive materials, including contaminated soil, small animals, and insects. We need to continue monitoring the effects of long

Jet Production in the Very Forward Direction at 13 TeV with CMS

CERN Document Server

Sunar Cerci, Deniz

2016-01-01

The new frontier collision energy $\\sqrt s = 13$~TeV of the Large Hadron Collider (LHC) at the Run II has important key points in particle physics. Forward jets, abundantly produced in proton-proton ($pp$) collisions, are useful tools to test Quantum Chromodynamics (QCD) predictions at low values of parton momentum fraction $x$. Measurement of the differential inclusive jet production cross section in the very forward direction is a powerful benchmark to study multiple partonic interactions (MPI) in $pp$ collisons. The very forward jet measurement is performed with the CMS detector in a special early run at 13 TeV taken with $B = 0$ T. The results are corrected to stable particle level and compared to several Monte Carlo (MC) model predictions.

Analysis of the Forward-Backward Trajectory Solution for the Mixed Quantum-Classical Liouville Equation

OpenAIRE

Hsieh, Chang-Yu; Kapral, Raymond

2013-01-01

Mixed quantum-classical methods provide powerful algorithms for the simulation of quantum processes in large and complex systems. The forward-backward trajectory solution of the mixed quantum-classical Liouville equation in the mapping basis [J. Chem. Phys. 137, 22A507 (2012)] is one such scheme. It simulates the dynamics via the propagation of forward and backward trajectories of quantum coherent state variables, and the propagation of bath trajectories on a mean-field potential determined j...

Multi-annual forward estimate - gas 2017

International Nuclear Information System (INIS)

2017-01-01

GRDF, GRTgaz, SPEGNN and TIGF gas transport and distribution operators have the responsibility to publish a reference document about the multi-annual forward estimate of gas consumption evolution and renewable gas production. This document is the second joint forecast report published by the 4 French gas operators. It presents, first, the situation, hypotheses, analysis and perspectives of the 4 main sectoral gas markets (residential, tertiary, industrial, mobility), then, the centralized power generation and cogeneration, next, the production of renewable gas (different sectors, hypotheses, analysis and perspectives), and finally, a multi-sectorial vision according to 3 different scenarios

Multi-annual forward estimate - gas 2016

International Nuclear Information System (INIS)

2016-01-01

GRDF, GRTgaz, SPEGNN and TIGF gas transport and distribution operators have the responsibility to publish a reference document about the multi-annual forward estimate of gas consumption evolution and renewable gas production. This document is the first joint forecast report published by the 4 French gas operators. It presents, first, the situation, hypotheses, analysis and perspectives of the 4 main sectoral gas markets (residential, tertiary, industrial, mobility), then, the centralized power generation and cogeneration, next, the production of renewable gas (different sectors, hypotheses, analysis and perspectives), and finally, a multi-sectorial vision according to 3 different scenarios

Radioactive Waste Management In The Chernobyl Exclusion Zone - 25 Years Since The Chernobyl Nuclear Power Plant Accident

International Nuclear Information System (INIS)

Farfan, E.; Jannik, T.

2011-01-01

Radioactive waste management is an important component of the Chernobyl Nuclear Power Plant accident mitigation and remediation activities of the so-called Chernobyl Exclusion Zone. This article describes the localization and characteristics of the radioactive waste present in the Chernobyl Exclusion Zone and summarizes the pathways and strategy for handling the radioactive waste related problems in Ukraine and the Chernobyl Exclusion Zone, and in particular, the pathways and strategies stipulated by the National Radioactive Waste Management Program. The brief overview of the radioactive waste issues in the ChEZ presented in this article demonstrates that management of radioactive waste resulting from a beyond-designbasis accident at a nuclear power plant becomes the most challenging and the costliest effort during the mitigation and remediation activities. The costs of these activities are so high that the provision of radioactive waste final disposal facilities compliant with existing radiation safety requirements becomes an intolerable burden for the current generation of a single country, Ukraine. The nuclear accident at the Fukushima-1 NPP strongly indicates that accidents at nuclear sites may occur in any, even in a most technologically advanced country, and the Chernobyl experience shows that the scope of the radioactive waste management activities associated with the mitigation of such accidents may exceed the capabilities of a single country. Development of a special international program for broad international cooperation in accident related radioactive waste management activities is required to handle these issues. It would also be reasonable to consider establishment of a dedicated international fund for mitigation of accidents at nuclear sites, specifically, for handling radioactive waste problems in the ChEZ. The experience of handling Chernobyl radioactive waste management issues, including large volumes of radioactive soils and complex structures

Optimal Design of a Push-Pull-Forward Half-Bridge (PPFHB) Bidirectional DC–DC Converter With Variable Input Voltage

DEFF Research Database (Denmark)

Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael A. E.

2012-01-01

This paper presents a low-cost bidirectional isolated dc–dc converte, derived from dual-active-bridge converter for the power sources with variable output voltage like supercapacitors. The proposed converter consists of push-pull-forward circuit half-bridge circuit (PPFHB) and a high-frequency tr......This paper presents a low-cost bidirectional isolated dc–dc converte, derived from dual-active-bridge converter for the power sources with variable output voltage like supercapacitors. The proposed converter consists of push-pull-forward circuit half-bridge circuit (PPFHB) and a high...

Compensating additional optical power in the central zone of a multifocal contact lens forminimization of the shrinkage error of the shell mold in the injection molding process.

Science.gov (United States)

Vu, Lien T; Chen, Chao-Chang A; Lee, Chia-Cheng; Yu, Chia-Wei

2018-04-20

This study aims to develop a compensating method to minimize the shrinkage error of the shell mold (SM) in the injection molding (IM) process to obtain uniform optical power in the central optical zone of soft axial symmetric multifocal contact lenses (CL). The Z-shrinkage error along the Z axis or axial axis of the anterior SM corresponding to the anterior surface of a dry contact lens in the IM process can be minimized by optimizing IM process parameters and then by compensating for additional (Add) powers in the central zone of the original lens design. First, the shrinkage error is minimized by optimizing three levels of four IM parameters, including mold temperature, injection velocity, packing pressure, and cooling time in 18 IM simulations based on an orthogonal array L 18 (2 1 ×3 4 ). Then, based on the Z-shrinkage error from IM simulation, three new contact lens designs are obtained by increasing the Add power in the central zone of the original multifocal CL design to compensate for the optical power errors. Results obtained from IM process simulations and the optical simulations show that the new CL design with 0.1 D increasing in Add power has the closest shrinkage profile to the original anterior SM profile with percentage of reduction in absolute Z-shrinkage error of 55% and more uniform power in the central zone than in the other two cases. Moreover, actual experiments of IM of SM for casting soft multifocal CLs have been performed. The final product of wet CLs has been completed for the original design and the new design. Results of the optical performance have verified the improvement of the compensated design of CLs. The feasibility of this compensating method has been proven based on the measurement results of the produced soft multifocal CLs of the new design. Results of this study can be further applied to predict or compensate for the total optical power errors of the soft multifocal CLs.

Practical use of the amplitude and phase modulation of a high-power RF pulse via feed-forward control

International Nuclear Information System (INIS)

Kawase, Keigo; Kato, Ryukou; Irizawa, Akinori; Isoyama, Goro; Kashiwagi, Shigeru

2013-01-01

A new feed-forward control system to precisely control the amplitude and phase of the pulsed RF power in an electron linear accelerator (linac) is developed to make the accelerating field constant. Fast variations and ripples in the amplitude and phase in the RF pulses are compensated by modulating the amplitude and phase in the low-level system with a variable attenuator and phase shifter. The system is innovated the overdrive technique, which is commonly used in analog circuits, to speed up the slow response of the phase shifter, while the control signals are digitally processed; thus, the method is a hybrid of analog and digital techniques. By using the new control system, we find that the peak-to-peak variations in the amplitude and phase are reduced from 11.6% to 0.4% and from 6.1 degrees to 0.3 degrees, respectively, in 7.6-μs-long RF pulses for the L-band electron linac at Osaka University. (author)

Feed forward control: An implementation at CIRFEL

International Nuclear Information System (INIS)

Krishnaswamy, J.; Lehrman, I.S.; Hartley, R.

1995-01-01

An integral part of the Compact InfraRed Free Electron LASER (CIRFEL) is control of the phase and amplitude stability in the RF power system. We have implemented such a Feed Forward system using the LabView software package, by National Instruments. We will discuss implementation and performance data of the Feed Forward control of the RF power system at CIRFEL. We will also briefly discuss some conditions under which the problem is ill-conditioned, and what idealizations can be made to remedy these ill-conditioned systems. Using an arbitrary function generator, we generate a driving signal for a voltage-controlled attenuator at the input side of the RF system, and we monitor the RF voltage in cell I of the photocathode gun using a digital storage oscilliscope in averaging mode. The system is stable enough to use data from one shot to modify the inputs for future shots. After downloading the averaged data to a personal computer via a GPIB (IEEE 488) bus, we use a simple linear transformation on the difference waveform between the current shot and the target to produce a correction signal. This signal is added to the driving signal in the arbitrary function generator, and the process is repeated until we get the flatness we need in the output signals from cell 1. The system for phase control is similar, with a voltage-controlled phase shifter replacing the attenuator, and monitoring of the RF phase in cell I replacing the monitoring of RF voltage. By repeatedly alternating between correcting the RF voltage (equivalent to correcting the RF power) and RF phase in cell 1, we are able to achieve simultaneous phase variations of <±1 degrees and amplitude variations of <±0.1% over a 3μsec pulse

Forward Conduction Mode Controlled Piezoelectric Transformer-Based PFC LED Drive

DEFF Research Database (Denmark)

Roedgaard, M. S.; Weirich, M.; Andersen, M. A. E.

2013-01-01

Light-emitting diode (LED) illumination is getting more and more common; as LED's performance is rising, the price is falling and is getting competitive. Some of the challenges of ac mains supplied illumination are the requirement of power factor correction (PFC) and the competitiveness of a low...... priced market. In this paper, a new forward conduction mode (FCM) control method for piezoelectric transformer (PT)-based power converters is proposed. A PT-based LED drive facilitating passive PFC is developed, utilizing and validating the FCM control method. The drive utilizes an inductorless half...... LED drive has been developed, supplied from 230-V 50-Hz ac mains, achieving a power factor of 0.96....

An evaluation method of power quality about electrified railways connected to power grid based on PSCAD/EMTDC

Science.gov (United States)

Liang, Weibin; Ouyang, Sen; Huang, Xiang; Su, Weijian

2017-05-01

The existing modeling process of power quality about electrified railways connected to power grid is complicated and the simulation scene is incomplete, so this paper puts forward a novel evaluation method of power quality based on PSCAD/ETMDC. Firstly, a model of power quality about electrified railways connected to power grid is established, which is based on testing report or measured data. The equivalent model of electrified locomotive contains power characteristic and harmonic characteristic, which are substituted by load and harmonic source. Secondly, in order to make evaluation more complete, an analysis scheme has been put forward. The scheme uses a combination of three-dimensions of electrified locomotive, which contains types, working conditions and quantity. At last, Shenmao Railway is taken as example to evaluate the power quality at different scenes, and the result shows electrified railways connected to power grid have significant effect on power quality.

Forward, Forward Option and No Hedging Which One is the Best for Managing Currency Risk?

Directory of Open Access Journals (Sweden)

Riko Hendrawan

2017-07-01

Full Text Available Bank Indonesia Regulation No.18/18/PBI/2016 concerning foreign exchange transactions against rupiah between banks and domestic parties, indicates that the importance of hedging for business actors in Indonesia. Based on the data of the rupiah exchange rate movement against the dollar from January 2006 to December 2016 shows that the fluctuation of the rupiah against the US dollar tends to weaken, although at some point the observation shows the strengthening of the rupiah against the US dollar. The purpose of this research is to assess impact of Forward, Forward Option and No Hedging Strategy for managing currency exposure between IDR to USD. Using data from January 2006–December 2016 taken from website of Bank Indonesia and Federal Reserve. Total 396 simulations,consists of 132 using Forward simulations, 132 using Forward Option simulations and 132 using No Hedging simulations. Findings from this research show that Forward Option was has no positive contribution in managing currency exposure, No Hedging Strategy has 36,36 percent positive contribution and forward contract has 72,73 percent positive contribution in managing currency exposure. Its means Forward Contract was better than Forward Option and No Hedging Strategies in managing currency exposure.

Forward tracking detectors

Indian Academy of Sciences (India)

At the ILC many of the most important physics reactions are central, so that the forward region, which is suppressed by the cos θ phase space factor often is a bit neglected. However, many processes at the ILC are peaked in the forward region like Bhabha scattering or W-pair production [1]. Fermion pair production has its.

Distribution of spinal neuronal networks controlling forward and backward locomotion.

Science.gov (United States)

Merkulyeva, Natalia; Veshchitskii, Aleksandr; Gorsky, Oleg; Pavlova, Natalia; Zelenin, Pavel V; Gerasimenko, Yury; Deliagina, Tatiana G; Musienko, Pavel

2018-04-20

Higher vertebrates, including humans, are capable not only of forward (FW) locomotion but also of walking in other directions relative to the body axis [backward (BW), sideways, etc.]. While the neural mechanisms responsible for controlling FW locomotion have been studied in considerable detail, the mechanisms controlling steps in other directions are mostly unknown. The aim of the present study was to investigate the distribution of spinal neuronal networks controlling FW and BW locomotion. First, we applied electrical epidural stimulation (ES) to different segments of the spinal cord from L2 to S2 to reveal zones triggering FW and BW locomotion in decerebrate cats of either sex. Second, to determine the location of spinal neurons activated during FW and BW locomotion, we used c-fos immunostaining. We found that the neuronal networks responsible for FW locomotion were distributed broadly in the lumbosacral spinal cord and could be activated by ES of any segment from L3 to S2. By contrast, networks generating BW locomotion were activated by ES of a limited zone from the caudal part of L5 to the caudal part of L7. In the intermediate part of the gray matter within this zone, a significantly higher number of c- fos -positive interneurons was revealed in BW-stepping cats compared with FW-stepping cats. We suggest that this region of the spinal cord contains the network that determines the BW direction of locomotion. Significance Statement Sequential and single steps in various directions relative to the body axis [forward (FW), backward (BW), sideways, etc.] are used during locomotion and to correct for perturbations, respectively. The mechanisms controlling step direction are unknown. In the present study, for the first time we compared the distributions of spinal neuronal networks controlling FW and BW locomotion. Using a marker to visualize active neurons, we demonstrated that in the intermediate part of the gray matter within L6 and L7 spinal segments

U Plant Geographic Zone Cleanup Prototype

International Nuclear Information System (INIS)

Romine, L.D.; Leary, K.D.; Lackey, M.B.; Robertson, J.R.

2006-01-01

The U Plant geographic zone (UPZ) occupies 0.83 square kilometers on the Hanford Site Central Plateau (200 Area). It encompasses the U Plant canyon (221-U Facility), ancillary facilities that supported the canyon, soil waste sites, and underground pipelines. The UPZ cleanup initiative coordinates the cleanup of the major facilities, ancillary facilities, waste sites, and contaminated pipelines (collectively identified as 'cleanup items') within the geographic zone. The UPZ was selected as a geographic cleanup zone prototype for resolving regulatory, technical, and stakeholder issues and demonstrating cleanup methods for several reasons: most of the area is inactive, sufficient characterization information is available to support decisions, cleanup of the high-risk waste sites will help protect the groundwater, and the zone contains a representative cross-section of the types of cleanup actions that will be required in other geographic zones. The UPZ cleanup demonstrates the first of 22 integrated zone cleanup actions on the Hanford Site Central Plateau to address threats to groundwater, the environment, and human health. The UPZ contains more than 100 individual cleanup items. Cleanup actions in the zone will be undertaken using multiple regulatory processes and decision documents. Cleanup actions will include building demolition, waste site and pipeline excavation, and the construction of multiple, large engineered barriers. In some cases, different cleanup actions may be taken at item locations that are immediately adjacent to each other. The cleanup planning and field activities for each cleanup item must be undertaken in a coordinated and cohesive manner to ensure effective execution of the UPZ cleanup initiative. The UPZ zone cleanup implementation plan (ZCIP) [1] was developed to address the need for a fundamental integration tool for UPZ cleanup. As UPZ cleanup planning and implementation moves forward, the ZCIP is intended to be a living document that will

Fungal levels in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone after the Great East Japan Earthquake.

Science.gov (United States)

Shinohara, Naohide; Tokumura, Masahiro; Hashimoto, Kazuhiro; Asano, Katsuyoshi; Kawakami, Yuji

2017-10-01

Residences located within 20 km of the damaged Fukushima Daiichi Nuclear Power Plant were evacuated shortly after the Great East Japan Earthquake. The levels of airborne and surface fungi were measured in six houses in the evacuation zone in August 2012 and February 2013. Airborne fungal levels in all of the houses in the summer were higher than the environmental standard levels for residential houses published in Architectural Institute of Japan (>1000 colony-forming units [CFU]/m 3 ). In two houses whose residents rarely returned to visit, fungal levels were extremely high (>52,000 CFU/m 3 ). Although fungal levels in the winter were much lower than those in the summer, they were still higher than environmental standard levels in several houses. Indoor fungal levels were significantly inversely related to the frequency with which residents returned, but they were not correlated with the air exchange rates, temperature, humidity, or radiation levels. Cladosporium spp. and Penicillium spp. were detected in every house. Aspergillus section Circumdati (Aspergillus ochraceus group) was also detected in several houses. These fungi produced ochratoxin A and ochratoxin B, which have nephrotoxic and carcinogenic potential. The present study suggests that further monitoring of fungal levels is necessary in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone, and that some houses may require fungal disinfection. The results suggest that residents' health could be at risk owing to the high levels of airborne fungi and toxic fungi Aspergillus section Circumdati. Therefore, monitoring and decontamination/disinfection of fungi are strongly recommended before residents are allowed to return permanently to their homes. In addition, returning to home with a certain frequency and adequate ventilation are necessary during similar situations, e.g., when residents cannot stay in their homes for a long period, because fungal levels in houses in the Fukushima Daiichi

Path Forward to Space Solar Power using the O'Neill - Glaser Model Modified for Climate Change Demand and Considering the Increasing Risk of Human Self-Extinction if Confined to Earth

Science.gov (United States)

Curreri, Peter A.; Nall, Mark

2013-01-01

The cost of energy is humanity's economic exchange rate with the universe. Space solar power is the first great step that our technological species has to utilize the energy of its star. The classic Peter Glaser Solar Power Satellite, SPS, and later designs collect a large area of solar energy in space and beam it back to Earth for use in the electric grid, but even with optimistic launch costs and technology innovation a clear economic path is not evident using Earth launch of SPS. O Neill in 1969 solved the transportation costs problem by a model that uses lunar and asteroid materials to build SPS and locates the labor force permanently in space (O Neill free space habitats). This solution closes the economics and predicts large profits after 17-35 years. However the costs of time have up to now prevented this solution. We discuss a strategy to move forward in SPS with the motivations to stop global warming and prevent human selfextinction. There are near term steps that can be taken that place us on this path forward. First, we must reevaluate the technologies for the classic model and update the parameters to current technology. As technological capability continues to increase exponentially, we need to understand when the monetary potential energy hills are small as the technology gets larger. But the chance for self-extinction, if humanity remains in a single vulnerable habitat, also increased exponentially with time. The path forward is to identify investment points while assessing the risks of non-action.

Decode and Zero-Forcing Forward Relaying with Relay Selection in Cognitive Radio Systems

KAUST Repository

Park, Kihong

2014-05-01

In this paper, we investigate a cognitive radio (CR) relay network with multiple relay nodes that help forwarding the signal of CR users. Best relay selection is considered to take advantage of its low complexity of implementation. When the primary user (PU) is located close to the relay nodes, the performance of the secondary network is severely degraded due to the interference power constraint during the transmission in the second hop. We propose a decode and zero-forcing forward scheme to suppress the interference power at the relay nodes and analyze the statistics of the end-to-end signal-to-noise ratio when the relay nodes are located arbitrarily and experience therefore non-identical Rayleigh fading channels. Numerical results validate our theoretical results and show that our proposed scheme improves the performance of the CR network when the PU is close to the relay nodes. © 2014 IEEE.

Radiation situation and irradiation level in forest workers in places of timber works in alienation zone of Chernobyl Atomic Power Plant

International Nuclear Information System (INIS)

Kalashnikova, Z.V.; Karachov, Yi.Yi.; Berezhna, T.Yi.; Kuchma, M.D.

1997-01-01

The radiation hygienic situation in the forest plots and dose load of the personnel at timber works in the alienation zone of the Chernobyl Atomic Power Plant was evaluated.It has been revealed that the density of contamination of the forest soil at the areas of timber works was 155.4-447.3 kBq centre dot m 2 . Maximum year equivalent dose on the lungs and total dose of external and internal irradiation in the forest workers in the zone of alienation during the work at the areas were about 40% of the values of the respective dose limits for the population of B category

LHC production of forward-center and forward-forward di-jets in the kt-factorization and transverse dependent unintegrated parton distribution frameworks

Science.gov (United States)

Modarres, M.; Masouminia, M. R.; Aminzadeh Nik, R.; Hosseinkhani, H.; Olanj, N.

2017-09-01

The present work is devoted to study the high-energy QCD events, such as the di-jet productions from proton-proton inelastic collisions at the LHC in the forward-center and the forward-forward configurations. This provides us with much valuable case study, since such phenomena can provide a direct glimpse into the partonic behavior of a hadron in a dominant gluonic region. We use the unintegrated parton distribution functions (UPDF) in the kt-factorization framework. The UPDF of Kimber et al. (KMR) and Martin et al. (MRW) are generated in the leading order (LO) and next-to-leading order (NLO), using the Harland-Lang et al. (MMHT2014) PDF libraries. While working in the forward-center and the forward-forward rapidity sectors, one can probe the parton densities at very low longitudinal momentum fractions (x). Such a model computation can provide simpler analytic description of data with respect to existing formalisms such as perturbative QCD. The differential cross-section calculations are performed at the center of mass energy of 7 TeV corresponding to CMS collaboration measurement. It is shown that the gluonic jet productions are dominant and a good description of data as well as other theoretical attempts (i.e. KS-linear, KS-nonlinear and rcBK) is obtained. The uncertainty of the calculations is derived by manipulating the hard scale of the processes by a factor of two. This conclusion is achieved, due to the particular visualization of the angular ordering constraint (AOC), that is incorporated in the definition of these UPDF.

Integrated forward/reverse logistics network design under uncertainty with pricing for collection of used products

DEFF Research Database (Denmark)

Fattahi, Mohammad; Govindan, Kannan

2017-01-01

This paper addresses design and planning of an integrated forward/reverse logistics network over a planning horizon with multiple tactical periods. In the network, demand for new products and potential return of used products are stochastic. Furthermore, collection amounts of used products...... with different quality levels are assumed dependent on offered acquisition prices to customer zones. A uniform distribution function defines the expected price of each customer zone for one unit of each used product. Using two-stage stochastic programming, a mixed-integer linear programming model is proposed....... To cope with demand and potential return uncertainty, Latin Hypercube Sampling method is applied to generate fan of scenarios and then, backward scenario reduction technique is used to reduce the number of scenarios. Due to the problem complexity, a novel simulation-based simulated annealing algorithm...

Study on optimal performance and working temperatures of endoreversible forward and reverse Carnot cycles

Energy Technology Data Exchange (ETDEWEB)

Chen, W.Z.; Sun, F.R.; Cheng, S.M.; Chen, L.G. [Huazhong Univ. of Sceince and Technology, Wuhan (China). Dept. of Power Engineering

1995-12-01

The connection between the expressions of optimization performances of Carnot heat engines, refrigerators and heat pumps, which operate subject to irreversible heat flow, is studied. We consider the endoreversible forward and reverse. Carnot cycles and analyse the expressions which relate efficiency, refrigeration and heating coefficients to power, refrigeration and heating rates, respectively. It is found and proved that when one of the optimal relations is derived the others are also determined, and give the unified formulation of the related optimal working temperatures of the forward and reverse Carnot cycles by isentropic temperature ratio exponent. Finally, several new optimal performance relations are derived for forward and reverse Carnot cycles under nonlinear heat transfer, and some major results in the references are easily deduced and unified in this paper. (author)

Conservation laws arising in the study of forward-forward Mean-Field Games

KAUST Repository

Gomes, Diogo A.; Nurbekyan, Levon; Sedjro, Marc

2017-01-01

We consider forward-forward Mean Field Game (MFG) models that arise in numerical approximations of stationary MFGs. First, we establish a link between these models and a class of hyperbolic conservation laws as well as certain nonlinear wave equations. Second, we investigate existence and long-time behavior of solutions for such models.

Conservation laws arising in the study of forward-forward Mean-Field Games

KAUST Repository

Gomes, Diogo A.

2017-04-24

We consider forward-forward Mean Field Game (MFG) models that arise in numerical approximations of stationary MFGs. First, we establish a link between these models and a class of hyperbolic conservation laws as well as certain nonlinear wave equations. Second, we investigate existence and long-time behavior of solutions for such models.

Aeromechanical stability of helicopters with composite rotor blades in forward flight

Science.gov (United States)

Smith, Edward C.; Chopra, Inderjit

1992-01-01

The aeromechanical stability, including air resonance in hover, air resonance in forward flight, and ground resonance, of a helicopter with elastically tailored composite rotor blades is investigated. Five soft-inplane hingeless rotor configurations, featuring elastic pitch-lag, pitch-flap and extension-torsion couplings, are analyzed. Elastic couplings introduced through tailored composite blade spars can have a powerful effect on both air and ground resonance behavior. Elastic pitch-flap couplings (positive and negative) strongly affect body, rotor and dynamic inflow modes. Air resonance stability is diminished by elastic pitch-flap couplings in hover and forward flight. Negative pitch-lag elastic coupling has a stabilizing effect on the regressive lag mode in hover and forward flight. The negative pitch-lag coupling has a detrimental effect on ground resonance stability. Extension-torsion elastic coupling (blade pitch decreases due to tension) decreases regressive lag mode stability in both airborne and ground contact conditions. Increasing thrust levels has a beneficial influence on ground resonance stability for rotors with pitch-flap and extension-torsion coupling and is only marginally effective in improving stability of rotors with pitch-lag coupling.

Simulation Results of Double Forward Converter

Directory of Open Access Journals (Sweden)

P. Vijaya KUMAR

2009-12-01

Full Text Available This work aims to find a better forward converter for DC to DC conversion.Simulation of double forward converter in SMPS system is discussed in this paper. Aforward converter with RCD snubber to synchronous rectifier and/or to current doubleris also discussed. The evolution of the forward converter is first reviewed in a tutorialfashion. Performance parameters are discussed including operating principle, voltageconversion ratio, efficiency, device stress, small-signal dynamics, noise and EMI. Itscircuit operation and its performance characteristics of the forward converter with RCDsnubber and double forward converter are described and the simulation results arepresented.

Conflicts in Africa and Major Powers: Proxy Wars, Zones of Influence or Provocative Instability

Directory of Open Access Journals (Sweden)

Jerry Rowlings Tafotie

2016-12-01

Full Text Available The article analyses the different nature of conflicts that have occurred in Africa since the end of Cold War. A special attention is given to the role of external factors in the process of conflict evolution and the escalation of violence on the African continent. In effect, this paper demonstrates through a critical examination of the meaning of proxy war as, zone of influence or provocation of instability as a strategy and an analysis of its employment by the United States and China, France etc. in Africa. The new potential confrontation between the United States and China as in Sudan, France in its former coloniesis not only based on a clash of world views about the structure and nature of international relations and security but largely over the control of strategically vital energy resources based in Africa. The authors conclude that this ultimately creates permanent tensions or bitter conflicts between the actors and African populations as a factor that have negative impact on the peace and stability of continent. According to the context of superpower conflict strategies, this paper critically examines, zone of influence, provoking of instability or proxy war as a viable national strategy of nuclear armed great powers in advancing and/or defending their global national interests in a bipolar/multipolar international system.

Moving not staying still in time to the zone

OpenAIRE

Woodward, Kath

2017-01-01

Time and temporality are central to being in the zone. Along with harmony and synchrony, the experience of the zone, whether individual or collective is located within a time when everything comes together in a moment, even if the moment is immeasurable and often experienced as timeless. This chapter explores the phenomenon and experience of the zone in boxing, as a powerfully enfleshed sport in which the zone is frequently invoked, both positively and negatively.

Equilibrium pricing in electricity markets with wind power

Science.gov (United States)

Rubin, Ofir David

Estimates from the World Wind Energy Association assert that world total wind power installed capacity climbed from 18 Gigawatt (GW) to 152 GW from 2000 to 2009. Moreover, according to their predictions, by the end of 2010 global wind power capacity will reach 190 GW. Since electricity is a unique commodity, this remarkable expansion brings forward several key economic questions regarding the integration of significant amount of wind power capacity into deregulated electricity markets. The overall dissertation objective is to develop a comprehensive theoretical framework that enables the modeling of the performance and outcome of wind-integrated electricity markets. This is relevant because the state of knowledge of modeling electricity markets is insufficient for the purpose of wind power considerations. First, there is a need to decide about a consistent representation of deregulated electricity markets. Surprisingly, the related body of literature does not agree on the very economic basics of modeling electricity markets. That is important since we need to capture the fundamentals of electricity markets before we introduce wind power to our study. For example, the structure of the electric industry is a key. If market power is present, the integration of wind power has large consequences on welfare distribution. Since wind power uncertainty changes the dynamics of information it also impacts the ability to manipulate market prices. This is because the quantity supplied by wind energy is not a decision variable. Second, the intermittent spatial nature of wind over a geographical region is important because the market value of wind power capacity is derived from its statistical properties. Once integrated into the market, the distribution of wind will impact the price of electricity produced from conventional sources of energy. Third, although wind power forecasting has improved in recent years, at the time of trading short-term electricity forwards, forecasting

Forward energy measurement with CMS

CERN Document Server

Kheyn, Lev

2016-01-01

Energy flow is measured in the forward region of CMS at pseudorapidities up to 6.6 in pp interactions at 13 TeV with forward (HF) and very forward (CASTOR) calorimeters. The results are compared to model predictions. The CMS results at different center-of-mass energies are intercompared using pseudorapidity variable shifted by beam rapidity, thus studying applicability of hypothesis of limiting fragmentation.

Predicting Factors of Zone 4 Attack in Volleyball.

Science.gov (United States)

Costa, Gustavo C; Castro, Henrique O; Evangelista, Breno F; Malheiros, Laura M; Greco, Pablo J; Ugrinowitsch, Herbert

2017-06-01

This study examined 142 volleyball games of the Men's Super League 2014/2015 seasons in Brazil from which we analyzed 24-26 games of each participating team, identifying 5,267 Zone 4 attacks for further analysis. Within these Zone 4 attacks, we analyzed the association between the effect of the attack carried out and the separate effects of serve reception, tempo and type of attack. We found that the reception, tempo of attack, second tempo of attack, and power of diagonal attack were predictors of the attack effect in Zone 4. Moreover, placed attacks showed a tendency to not yield a score. In conclusion, winning points in high-level men's volleyball requires excellent receptions, a fast attack tempo and powerfully executed of attacks.

Opportunities and Challenges in Application of Forward Osmosis in Food Processing.

Science.gov (United States)

Rastogi, Navin K

2016-01-01

Food processing and preservation technologies must maintain the fresh-like characteristics of food while providing an acceptable and convenient shelf life as well as assuring safety and nutritional value. Besides, the consumers' demand for the highest quality convenience foods in terms of natural flavor and taste, free from additives and preservatives necessitated the development of a number of membrane-based non-thermal approaches to the concentration of liquid foods, of which forward osmosis has proven to be the most valuable one. A series of recent publications in scientific journals have demonstrated novel and diverse uses of this technology for food processing, desalination, pharmaceuticals as well as for power generation. Its novel features, which include the concentration of liquid foods at ambient temperature and pressure without significant fouling of membrane, made the technology commercially attractive. This review aims to identify the opportunities and challenges associated with this technology. At the same time, it presents a comprehensive account of recent advances in forward osmosis technology as related to the major issues of concern in its rapidly growing applications in food processing such as concentration of fruit and vegetable juices (grape, pineapple, red raspberry, orange, and tomato juice and red radish juice) and natural food colorants (anthocyanin and betalains extracts). Several vibrant and vital issues such as recent developments in the forward osmosis membrane and concentration polarization aspects have been also addressed. The asymmetric membrane used for forward osmosis poses newer challenges to account both external and internal concentration polarization leading to significant reduction in flux. The recent advances and developments in forward osmosis membrane processes, mechanism of water transport, characteristics of draw solution and membranes as well as applications of forward osmosis in food processing have been discussed.

Accelerating nuclear power standards development and promoting sound nuclear power development in China

International Nuclear Information System (INIS)

Yang Changli

2008-01-01

The paper expounds the importance of quickening establishment and perfection of nuclear power standard system in China, analyzes achievements made and problems existed during the development of nuclear power standards, put forward proposals to actively promote the work in this regard, and indicates that CNNC will further strengthen the standardization work, enhance coordination with those trades related to nuclear power standards, and jointly promote the development of nuclear power standards. (authors)

Seasonal evolution of the Arctic marginal ice zone and its power-law obeying floe size distribution

Science.gov (United States)

Zhang, J.; Stern, H. L., III; Schweiger, A. J. B.; Steele, M.; Hwang, P. B.

2017-12-01

A thickness, floe size, and enthalpy distribution (TFED) sea ice model, implemented numerically into the Pan-arctic Ice-Ocean Modeling and Assimilation System (PIOMAS), is used to investigate the seasonal evolution of the Arctic marginal ice zone (MIZ) and its floe size distribution. The TFED sea ice model, by coupling the Zhang et al. [2015] sea ice floe size distribution (FSD) theory with the Thorndike et al. [1975] ice thickness distribution (ITD) theory, simulates 12-category FSD and ITD explicitly and jointly. A range of ice thickness and floe size observations were used for model calibration and validation. The model creates FSDs that generally obey a power law or upper truncated power law, as observed by satellites and aerial surveys. In this study, we will examine the role of ice fragmentation and lateral melting in altering FSDs in the Arctic MIZ. We will also investigate how changes in FSD impact the seasonal evolution of the MIZ by modifying the thermodynamic processes.

Ecosystem health evaluation system of the water-fluctuating zone in the Three Gorges Area

Institute of Scientific and Technical Information of China (English)

WANG Li-ao; YUAN Hui; ZHANG Yan-hui; HU Gang

2004-01-01

This paper discribes the definition of ecosystem health for the water-level flutuation zone of the Three Gorges Region and puts forward an evaluation system involving indicators in three groups: 1) structural indicators comprise slope, biodiversity,environmental capacity, stability, restoration ability and damage situation; 2) functional indicators including probability of geological hazard, erosion rate, habitat rate, land use intension and days of tourist season; 3) environmental indicatiors made up of population quality, potential intension of human, ground water quality, ambient air quality, wastewater treatment rate, pesticide use rate, fertilizer use rate, environmental management and public participation. In the design of the system, the subject zone is regarded as the type similar to wetland and the impacts of human activities on the zone are attached great importance to.

Advantages and application of forward osmosis

Science.gov (United States)

This month's Processing column explores the use of forward osmosis to dewater and concentrate. Forward osmosis is performed with specially designed membranes and requires very little energy. Where thermal evaporation and reverse osmosis may damage or alter products, forward osmosis preserves the s...

High performance thin-film composite forward osmosis membrane.

Science.gov (United States)

Yip, Ngai Yin; Tiraferri, Alberto; Phillip, William A; Schiffman, Jessica D; Elimelech, Menachem

2010-05-15

Recent studies show that osmotically driven membrane processes may be a viable technology for desalination, water and wastewater treatment, and power generation. However, the absence of a membrane designed for such processes is a significant obstacle hindering further advancements of this technology. This work presents the development of a high performance thin-film composite membrane for forward osmosis applications. The membrane consists of a selective polyamide active layer formed by interfacial polymerization on top of a polysulfone support layer fabricated by phase separation onto a thin (40 mum) polyester nonwoven fabric. By careful selection of the polysulfone casting solution (i.e., polymer concentration and solvent composition) and tailoring the casting process, we produced a support layer with a mix of finger-like and sponge-like morphologies that give significantly enhanced membrane performance. The structure and performance of the new thin-film composite forward osmosis membrane are compared with those of commercial membranes. Using a 1.5 M NaCl draw solution and a pure water feed, the fabricated membranes produced water fluxes exceeding 18 L m(2-)h(-1), while consistently maintaining observed salt rejection greater than 97%. The high water flux of the fabricated thin-film composite forward osmosis membranes was directly related to the thickness, porosity, tortuosity, and pore structure of the polysulfone support layer. Furthermore, membrane performance did not degrade after prolonged exposure to an ammonium bicarbonate draw solution.

High Performance Thin-Film Composite Forward Osmosis Membrane

KAUST Repository

Yip, Ngai Yin

2010-05-15

Recent studies show that osmotically driven membrane processes may be a viable technology for desalination, water and wastewater treatment, and power generation. However, the absence of a membrane designed for such processes is a significant obstacle hindering further advancements of this technology. This work presents the development of a high performance thin-film composite membrane for forward osmosis applications. The membrane consists of a selective polyamide active layer formed by interfacial polymerization on top of a polysulfone support layer fabricated by phase separation onto a thin (40 μm) polyester nonwoven fabric. By careful selection of the polysulfone casting solution (i.e., polymer concentration and solvent composition) and tailoring the casting process, we produced a support layer with a mix of finger-like and sponge-like morphologies that give significantly enhanced membrane performance. The structure and performance of the new thin-film composite forward osmosis membrane are compared with those of commercial membranes. Using a 1.5 M NaCl draw solution and a pure water feed, the fabricated membranes produced water fluxes exceeding 18 L m2-h-1, while consistently maintaining observed salt rejection greater than 97%. The high water flux of the fabricated thin-film composite forward osmosis membranes was directly related to the thickness, porosity, tortuosity, and pore structure of the polysulfone support layer. Furthermore, membrane performance did not degrade after prolonged exposure to an ammonium bicarbonate draw solution. © 2010 American Chemical Society.

The ATLAS Forward Physics Program

OpenAIRE

Royon, C

2010-01-01

After a brief review of the approved ATLAS forward detector system we describe the main ATLAS forward physics program. This program currently includes such topics as soft and hard diffraction, double pomeron exchange, central exclusive production, rapidity gap survival, two photon physics, the determination of the total cross-section and the determination of the absolute luminosity A possible high luminosity upgrade program involving new forward proton detectors is also briefly reviewed. This...

Forward and reverse mapping for milling process using artificial neural networks

Directory of Open Access Journals (Sweden)

Rashmi L. Malghan

2018-02-01

Full Text Available The data set presented is related to the milling process of AA6061-4.5%Cu-5%SiCp composite. The data primarily concentrates on predicting values of some machining responses, such as cutting force, surface finish and power utilization utilizing using forward back propagation neural network based approach, i.e. ANN based on three process parameters, such as spindle speed, feed rate and depth of cut.The comparing reverse model is likewise created to prescribe the ideal settings of processing parameters for accomplishing the desired responses as indicated by the necessities of the end clients. These modelling approaches are very proficient to foresee the benefits of machining responses and also process parameter settings in light of the experimental technique. Keywords: ANN, Forward mapping, Reverse mapping, Milling process

Review and Analysis of Solid Long-lived and High Level Radioactive Waste arising at the Chernobyl Nuclear Power Plant and the Restricted Zone

International Nuclear Information System (INIS)

Antropov, V.M.; Bugai, D.A.; Dutton, L.M.C.; Gerchikov, M.Y.; Kennett, E.J.; Ledenev, A.I.; Novikov, A.A.; Rudko, V.; Ziegenhagen, J.

2001-01-01

The study characterised potential waste arisings in the Exclusion Zone surrounding the Chernobyl Nuclear Power Plant. Studied sites include the Industrial Zone outside the Sarcophagus, three engineered disposal sites (the so-called PZRO), non-engineered near surface trench dumps (PVLRO), contaminated soil and sites of ''unauthorized'' disposal within the Exclusion Zone. Analysis of the previous methodology used for waste characterisation and inventory estimates identified a number of errors. A new database was established, which contains the most up-to date information on radwaste in the Exclusion Zone. Based on the analysis of the available information and potential radiological consequences, a judgement was taken regarding the priority of waste retrieval. In a number of cases it is necessary to carry out risk assessment to ensure that in-situ disposal would satisfy the Ukrainian regulations. Assessments of waste stream volumes for subsequent incineration, encapsulation, storage and disposal in the planned near-surface facilities have been made. It is judged that throughput and capacity of the planned waste management facilities specified by OSAT is, in general, appropriate to the likely waste arisings. (author)

Control system for a nuclear power producing unit

International Nuclear Information System (INIS)

Durrant, O.W.

1978-01-01

The invention provides in a control system for a nuclear power producing unit comprising a pressurized water reactor, a once-through steam generator provided with feedwater supply means, a turbine-generator supplied with steam from the steam generator and means maintaining a flow of pressurized water through the reactor and steam generator. The combination comprising; means generating a feed forward control signal proportional to the desired power output of the power producing unit, a second means for adjusting the reactor heat release, a third means for adjusting the rate of flow of feedwater to the steam generator, the second and third means solely responsive to and operated in parallel from the feed forward control signal whereby the reactor heat release and the rate of flow of feedwater to the steam generator are each maintained in a discrete functional relationship to the feed forward control signal

Effects of radioactive fallout on soil animal populations in the 30 km zone of the Chernobyl atomic power station

International Nuclear Information System (INIS)

Krivolutzkij, D.A.; Pokarzhevskij, A.D.

1992-01-01

Studies were carried out during July and September 1986, April 1987 and October 1988. Radioactive fallout after the Chernobyl atomic power station (APS) accident induced catastrophic effects on populations of small pine-litter faunae within the 30km zone around the station. Effects on soil faunae were not so marked due to shielding by the soil, or on litter faunae at the edge of the 30km zone due to distance from the source. Thirty-gray doses did not directly affect adult animals in the soil and litter, but impacted their eggs and juveniles. Resident populations recovered slowly during the first year after the accident. Insect migration into the contaminated area was the primary source of soil animal population recovery. After 2-2.5 year, marked differences between populations in the contaminated and control areas were no longer found. (author). 5 refs.; 6 tabs

Force measurements of flexible tandem wings in hovering and forward flights

International Nuclear Information System (INIS)

Zheng, Yingying; Wu, Yanhua; Tang, Hui

2015-01-01

Aerodynamic forces, power consumptions and efficiencies of flexible and rigid tandem wings undergoing combined plunging/pitching motion were measured in a hovering flight and two forward flights with Strouhal numbers of 0.6 and 0.3. Three flexible dragonfly-like tandem wing models termed Wing I, Wing II, and Wing III which are progressively less flexible, as well as a pair of rigid wings as the reference were operated at three phase differences of 0°, 90° and 180°. The results showed that both the flexibility and phase difference have significant effects on the aerodynamic performances. In both hovering and forward flights at a higher oscillation frequency of 1 Hz (St = 0.6), the Wing III model outperformed the other wing models with larger total horizontal force coefficient and efficiency. In forward flight at the lower frequency of 0.5 Hz (St = 0.3), Wing III, rigid wings and Wing II models performed best at 0°, 90° and 180° phase difference, respectively. From the time histories of force coefficients of fore- and hind-wings, different peak values, phase lags, and secondary peaks were found to be the important reasons to cause the differences in the average horizontal force coefficients. Particle image velocimetry and deformation measurements were performed to provide the insights into how the flexibility affects the aerodynamic performance of the tandem wings. The spanwise bending deformation was found to contribute to the horizontal force, by offering a more beneficial position to make LEV more attached to the wing model in both hovering and forward flights, and inducing a higher-velocity region in forward flight. (paper)

Forward contract - minimize the exchange risk

OpenAIRE

Martin Maršík; František Vebr

1998-01-01

How can a Czech export (import) company hedge exchange risk? Some of the possibilities are these: 1/ use only CZK for foreign contracts; 2/ matching payments in the same or a parallel currency; 3/ use the products of the money markets; 4/ use the products of the forward market - FORWARD CONTRACT The forward market offers a forward contract to buy or sell a fixed amount of currency at a fixed price on a specific date in the future. The settlement of the contract is in more than two days. The e...

Morphological peculiarities of duodenal peptic ulcer and leucocytes functional activity in the persons who were present in the zone of the accident at Chernobyl Atomic Power Station

International Nuclear Information System (INIS)

Babak, O.Ya.; Kushnyir, Yi.E.; Bobro, L.M.; Karamishev, D.V.

1994-01-01

36 persons with duodenal peptic ulcer (DPU) who were in the zone of the accident at Chernobyl Atomic Power Station (experimental group) and 20 patients who were not exposed to small doses of ionizing radiation were examined to study morphological peculiarities of DPU and blood leucocytes functional activity in the persons who were present in the zone of the accident. The finding have shown that in the persons, exposed to small doses of ionizing radiation, peptic ulcer is often accompanied by erosive changes of gastric and duodenal mucosa. Disturbance of mucus formation in myocytes and secret evacuation from the cells, epithelium large-intestine-type metaplasia, were revealed. Shift of cellular correlation balance in inflammatory infiltrate to the side of monocytes number increase as well as decrease of leucocytes functional activity, manifesting itself by slowing a granulocytes migration to the focus of inflammation, were noted, which is necessary to take into account at administration of effective peptic ulcer therapy in the persons who were in the zone of the accident at Chernobyl Atomic Power Station

A nonsteady-state firn-densification model for the percolation zone of a glacier

DEFF Research Database (Denmark)

Reeh, Niels

2008-01-01

A simple steady state firn-densification model is modified to account for short-term time variations of accumulation rate and surface temperature. The temporal surface-elevation- and mass changes at two sites in the percolation zone of an ice sheet in response to various climate histories...... are determined. It is shown that a straight-forward translation of observed short-term ice-sheet surface-elevation variations into mass changes may be completely misleading, particularly for the percolation zone of the ice sheet, where temperature driven variations of melting/re-freezing rates have a strong...... impact on near surface density. In the lower percolation zone, the mass change associated with a temperature anomaly in respect to the mean climate may for example amount to as little as 10 percent of the observed, simultaneous surface elevation change. Moreover, significant surface elevation change may...

Technoeconomic Optimization of Waste Heat Driven Forward Osmosis for Flue Gas Desulfurization Wastewater Treatment

Energy Technology Data Exchange (ETDEWEB)

Gingerich, Daniel B [Carnegie Mellon Univ., Pittsburgh, PA (United States); Bartholomew, Timothy V [Carnegie Mellon Univ., Pittsburgh, PA (United States); Mauter, Meagan S [Carnegie Mellon Univ., Pittsburgh, PA (United States)

2017-06-26

With the Environmental Protection Agency’s recent Effluent Limitation Guidelines for Steam Electric Generators, power plants are having to install and operate new wastewater technologies. Many plants are evaluating desalination technologies as possible compliance options. However, the desalination technologies under review that can reduce wastewater volume or treat to a zero-liquid discharges standard have a significant energy penalty to the plant. Waste heat, available from the exhaust gas or cooling water from coal-fired power plants, offers an opportunity to drive wastewater treatment using thermal desalination technologies. One such technology is forward osmosis (FO). Forward osmosis utilizes an osmotic pressure gradient to passively pull water from a saline or wastewater stream across a semi-permeable membrane and into a more concentrated draw solution. This diluted draw solution is then fed into a distillation column, where the addition of low temperature waste heat can drive the separation to produce a reconcentrated draw solution and treated water for internal plant reuse. The use of low-temperature waste heat decouples water treatment from electricity production and eliminates the link between reducing water pollution and increasing air emissions from auxiliary electricity generation. In order to evaluate the feasibility of waste heat driven FO, we first build a model of an FO system for flue gas desulfurization (FGD) wastewater treatment at coal-fired power plants. This model includes the FO membrane module, the distillation column for draw solution recovery, and waste heat recovery from the exhaust gas. We then add a costing model to account for capital and operating costs of the forward osmosis system. We use this techno-economic model to optimize waste heat driven FO for the treatment of FGD wastewater. We apply this model to three case studies: the National Energy Technology Laboratory (NETL) 550 MW model coal fired power plant without carbon

Rate Maximization in MIMO Decode-and-Forward Communications With an EH Relay and Possibly Imperfect CSI

KAUST Repository

Benkhelifa, Fatma; Salem, Ahmed Sultan; Alouini, Mohamed-Slim

2016-01-01

In this paper, we investigate the simultaneous wireless information and power transfer (SWIPT) in a multiple-input multiple-output (MIMO) decode-and-forward (DF) relay system where the relay is an energy harvesting (EH) multi-antenna node equipped

A study of s new power semiconductor insulated gate bipolar transistor (IGBT) characteristics and its application to automotive ignition

International Nuclear Information System (INIS)

Rabah, K.V.O.

1995-05-01

Assessment has been made of the problem of the on-resistance and temperature effects in the three power transistor combinations, such as Darlington-types or IGBT. The IGBT is a device in which the drain of the MOSFET feeds the bipolar base in monolithic (IC and Power on the same chip) to give it both the MOS and bipolar advantages. The high temperature operating characteristics of the device are discussed and compared to that of power bipolar transistor. Unlike the power bipolar transistor whose operating current density shows current crowding at above forward collector current of 4Amps and forward voltage drop above 0.4V, the IGBT is found to maintain its high current density above forward collector of current 1Amp (or a forward voltage drop above 1.2V). The results also indicate that these devices (IGBTs) can be interdigited (paralleled) without current hogging problems if the forward conduction occurs at forward voltage drops in excess of 1.2V, and this makes it the best candidate for automotive ignition power switches. (author). 20 refs, 10 figs, 1 tab

Forward Scattering of Loaded and Unloaded Antennas

DEFF Research Database (Denmark)

Gustafsson, Mats; Andersen, Jørgen Bach; Kristensson, Gerhard

2012-01-01

Forward scattering of antennas is related to antenna performance via the forward-scattering sum rule. The forward-scattering sum rule is an integral identity that shows that a weighted integral of the extinction cross section over all spectrum is proportional to the static polarizability...... of the antenna structure. Here, the forward-scattering sum rule is experimentally verified for loaded, short-circuit, and open-circuit cylindrical dipole antennas. It is also shown that the absorption efficiency cannot be greater than 1/2 for reciprocal linearly polarized lossless matched antennas...... with a symmetric radiation pattern in the forward and backward directions....

A real time measurement of junction temperature variation in high power IGBT modules for wind power converter application

DEFF Research Database (Denmark)

Ghimire, Pramod; Pedersen, Kristian Bonderup; de Vega, Angel Ruiz

2014-01-01

This paper presents a real time measurement of on-state forward voltage and estimating the junction temperature for a high power IGBT module during a power converter operation. The power converter is realized as it can be used for a wind turbine system. The peak of the junction temperature is dec...

Analysis of the efficiency of the Iberian power futures market

International Nuclear Information System (INIS)

Capitan Herraiz, Alvaro; Rodriguez Monroy, Carlos

2009-01-01

Market efficiency is analysed for the Iberian Power Futures Market and other European Power Markets, as well as other fuel markets through evaluation of ex-post Forward Risk Premium. The equilibrium price from compulsory call auctions for distribution companies within the framework of the Iberian Power Futures Market is not optimal for remuneration purposes as it seems to be slightly upward biased. In the period considered (August 2006-July 2008), monthly futures contracts behave similarly to quarterly contracts. Average risk premia have been positive in power and natural gas markets but negative in oil and coal markets. Different hypotheses are tested regarding increasing volatility with maturity and regarding Forward Risk Premium variations (decreasing with variance of spot prices during delivery period and increasing with skewness of spot prices during delivery period). Enlarged data sets are recommended for stronger test results. Energy markets tend to show limited levels of market efficiency. Regarding the emerging Iberian Power Futures Market, price efficiency is improved with market development of all the coexistent forward contracting mechanisms and with further integration of European Regional Electricity Markets. (author)

Adaptive management of social-ecological systems: the path forward

Science.gov (United States)

Allen, Craig R.

2015-01-01

Adaptive management remains at the forefront of environmental management nearly 40 years after its original conception, largely because we have yet to develop other methodologies that offer the same promise. Despite the criticisms of adaptive management and the numerous failed attempts to implement it, adaptive management has yet to be replaced with a better alternative. The concept persists because it is simple, allows action despite uncertainty, and fosters learning. Moving forward, adaptive management of social-ecological systems provides policymakers, managers and scientists a powerful tool for managing for resilience in the face of uncertainty.

Trade-Offs between Energy Saving and Reliability in Low Duty Cycle Wireless Sensor Networks Using a Packet Splitting Forwarding Technique

Directory of Open Access Journals (Sweden)

Leonardi Alessandro

2010-01-01

Full Text Available One of the challenging topics and design constraints in Wireless Sensor Networks (WSNs is the reduction of energy consumption because, in most application scenarios, replacement of power resources in sensor devices might be unfeasible. In order to minimize the power consumption, some nodes can be put to sleep during idle times and wake up only when needed. Although it seems the best way to limit the consumption of energy, other performance parameters such as network reliability have to be considered. In a recent paper, we introduced a new forwarding algorithm for WSNs based on a simple splitting procedure able to increase the network lifetime. The forwarding technique is based on the Chinese Remainder Theorem and exhibits very good results in terms of energy efficiency and complexity. In this paper, we intend to investigate a trade-off between energy efficiency and reliability of the proposed forwarding scheme when duty-cycling techniques are considered too.

A nuclear-free zone for the Southwest Pacific: prospects and significance

International Nuclear Information System (INIS)

Fry, G.

1983-01-01

The Australian Government is currently seeking to promote the concept of a nuclear-free zone for the Southwest Pacific. This paper explores three fundamental questions concerning the Australian proposal. Firstly, what would be the boundaries of such a zone and what does 'nuclear-free' mean in this context Secondly, what are the prospects for agreement on the establishment of a zone. Could regional states and nuclear powers agree to what is being proposed. And finally, what would be the significance, in arms control terms, were such an agreement to be signed. Would it, in fact, achieve anything. In an approach to these questions, the author surveys the strategic situation in the region, the level and pattern of nuclear involvement, past experience with zone proposals, and the current positions of various regional states and nuclear weapons powers on this question. He concludes that the necessary basis for agreement does exist and that modest arms control objectives could be served by the establishment of such a zone

Forward Osmosis in Wastewater Treatment Processes.

Science.gov (United States)

Korenak, Jasmina; Basu, Subhankar; Balakrishnan, Malini; Hélix-Nielsen, Claus; Petrinic, Irena

2017-01-01

In recent years, membrane technology has been widely used in wastewater treatment and water purification. Membrane technology is simple to operate and produces very high quality water for human consumption and industrial purposes. One of the promising technologies for water and wastewater treatment is the application of forward osmosis. Essentially, forward osmosis is a process in which water is driven through a semipermeable membrane from a feed solution to a draw solution due to the osmotic pressure gradient across the membrane. The immediate advantage over existing pressure driven membrane technologies is that the forward osmosis process per se eliminates the need for operation with high hydraulic pressure and forward osmosis has low fouling tendency. Hence, it provides an opportunity for saving energy and membrane replacement cost. However, there are many limitations that still need to be addressed. Here we briefly review some of the applications within water purification and new developments in forward osmosis membrane fabrication.

Strontium-90 activity concentration in soil samples from the exclusion zone of the Fukushima daiichi nuclear power plant

Science.gov (United States)

Sahoo, Sarata Kumar; Kavasi, Norbert; Sorimachi, Atsuyuki; Arae, Hideki; Tokonami, Shinji; Mietelski, Jerzy Wojciech; Łokas, Edyta; Yoshida, Satoshi

2016-04-01

The radioactive fission product 90Sr has a long biological half-life (˜18 y) in the human body. Due to its chemical similarity to calcium it accumulates in bones and irradiates the bone marrow, causing its high radio-toxicity. Assessing 90Sr is therefore extremely important in case of a nuclear disaster. In this work 16 soil samples were collected from the exclusion zone (background, stemming from global fallout due to the atmospheric nuclear weapon tests. Correlation analysis between 90Sr and 137Cs activity concentrations provides a potentially powerful tool to discriminate background 90Sr level from its Fukushima contribution.

Forward physics with CMS

CERN Document Server

Grothe, Monika

2008-01-01

Forward physics with CMS at the LHC covers a wide range of physics subjects, including very low-x_Bj QCD, underlying event and multiple interactions characteristics, gamma-mediated processes, shower development at the energy scale of primary cosmic ray interactions with the atmosphere, diffraction in the presence of a hard scale and even MSSM Higgs discovery in central exclusive production. Selected feasibility studies to illustrate the forward physics potential of CMS are presented.

Mouse forward genetics in the study of the peripheral nervous system and human peripheral neuropathy

Science.gov (United States)

Douglas, Darlene S.; Popko, Brian

2009-01-01

Forward genetics, the phenotype-driven approach to investigating gene identity and function, has a long history in mouse genetics. Random mutations in the mouse transcend bias about gene function and provide avenues towards unique discoveries. The study of the peripheral nervous system is no exception; from historical strains such as the trembler mouse, which led to the identification of PMP22 as a human disease gene causing multiple forms of peripheral neuropathy, to the more recent identification of the claw paw and sprawling mutations, forward genetics has long been a tool for probing the physiology, pathogenesis, and genetics of the PNS. Even as spontaneous and mutagenized mice continue to enable the identification of novel genes, provide allelic series for detailed functional studies, and generate models useful for clinical research, new methods, such as the piggyBac transposon, are being developed to further harness the power of forward genetics. PMID:18481175

The ALICE forward multiplicity detector

DEFF Research Database (Denmark)

Holm Christensen, Christian; Gulbrandsen, Kristjan; Sogaard, Carsten

2007-01-01

The ALICE Forward Multiplicity Detector (FMD) is a silicon strip detector with 51,200 strips arranged in 5 rings, covering the range $-3.4......The ALICE Forward Multiplicity Detector (FMD) is a silicon strip detector with 51,200 strips arranged in 5 rings, covering the range $-3.4...

Review of Power System Stability with High Wind Power Penetration

DEFF Research Database (Denmark)

Hu, Rui; Hu, Weihao; Chen, Zhe

2015-01-01

analyzing methods and stability improvement approaches. With increasing wind power penetration, system balancing and the reduced inertia may cause a big threaten for stable operation of power systems. To mitigate or eliminate the wind impacts for high wind penetration systems, although the practical......This paper presents an overview of researches on power system stability with high wind power penetration including analyzing methods and improvement approaches. Power system stability issues can be classified diversely according to different considerations. Each classified issue has special...... and reliable choices currently are the strong outside connections or sufficient reserve capacity constructions, many novel theories and approaches are invented to investigate the stability issues, looking forward to an extra-high penetration or totally renewable resource based power systems. These analyzing...

Rate Maximization in MIMO Decode-and-Forward Communications With an EH Relay and Possibly Imperfect CSI

KAUST Repository

Benkhelifa, Fatma

2016-08-29

In this paper, we investigate the simultaneous wireless information and power transfer (SWIPT) in a multiple-input multiple-output (MIMO) decode-and-forward (DF) relay system where the relay is an energy harvesting (EH) multi-antenna node equipped with an EH receiver and an information decoding (ID) receiver. The relay harvests the energy from the radio frequency (RF) signals sent by the source and uses it to forward the signals to the destination. The main objective in this paper is to maximize the achievable transmission rate of the overall link by optimizing the source/relay precoders. First, we study an upper bound on the maximum achievable rate where we assume that the EH and ID receivers operate simultaneously and have access to the whole power of the received signals. Afterwards, we study two practical schemes, which are the power splitting (PS) and time switching (TS) schemes, where the ID and EH receivers have partial access to the power or duration of the received signals. For each scheme, we have studied the complexity and the performance comparison. In addition, we considered the case of the imperfect channel estimation error and we have observed its impact on the achievable end-to-end rate and the harvested energy at the relay. © 1972-2012 IEEE.

Innovation is the only way forward to re-launch nuclear power

International Nuclear Information System (INIS)

Chapuis, F.; L'Hostis, N.

2014-01-01

Constituting a high value added sector for France, civil nuclear power is faced with regulatory, societal and economic constraints, all of which weigh on industry's various participants. In a world context, where electricity production is booming, the future share of nuclear power is under threat. Nuclear power has important assets: reliability and independence but has also to face societal, political and economic pressures. The outlook for mature electronuclear technology is dependent on the innovations that its actors can promote. The 4. generation reactors are far more innovative than the previous generation in terms of a far better utilisation rate of uranium resource, or of co-production of electric power and heat that can be used for instance for hydrogen production. Innovations can also be found in the size of reactors: small and medium sized reactors can be proposed to meet the energy demand of countries whose energy consumption grows faster than the development of their infra-structures. Another step necessary for the development of nuclear power is the implementing of the same international high standards of nuclear safety any where in the world

An Opportunistic Routing for Data Forwarding Based on Vehicle Mobility Association in Vehicular Ad Hoc Networks

Directory of Open Access Journals (Sweden)

Leilei Wang

2017-11-01

Full Text Available Vehicular ad hoc networks (VANETs have emerged as a new powerful technology for data transmission between vehicles. Efficient data transmission accompanied with low data delay plays an important role in selecting the ideal data forwarding path in VANETs. This paper proposes a new opportunity routing protocol for data forwarding based on vehicle mobility association (OVMA. With assistance from the vehicle mobility association, data can be forwarded without passing through many extra intermediate nodes. Besides, each vehicle carries the only replica information to record its associated vehicle information, so the routing decision can adapt to the vehicle densities. Simulation results show that the OVMA protocol can extend the network lifetime, improve the performance of data delivery ratio, and reduce the data delay and routing overhead when compared to the other well-known routing protocols.

CMS Forward Pixel Upgrade Electronics and System Testing

CERN Document Server

Weber, Hannsjorg Artur

2016-01-01

This note discusses results of electronics and system testing of the CMS forward pixel (FPIX) detector upgrade for Phase 1. The FPIX detector is comprised of four stand-alone half cylinders, each of which contains frontend readout electronic boards, power regulators, cables and fibers in addition to the pixel modules. All of the components undergo rigorous testing and quality assurance before assembly into the half cylinders. Afterwards, we perform full system tests on the completely assembled half cylinders, including calibrations at final operating temperatures, characterization of the realistic readout chain, and system grounding and noise studies. The results from all these tests are discussed.

Metabolic power demands of rugby league match play.

Science.gov (United States)

Kempton, Tom; Sirotic, Anita Claire; Rampinini, Ermanno; Coutts, Aaron James

2015-01-01

To describe the metabolic demands of rugby league match play for positional groups and compare match distances obtained from high-speed-running classifications with those derived from high metabolic power. Global positioning system (GPS) data were collected from 25 players from a team competing in the National Rugby League competition over 39 matches. Players were classified into positional groups (adjustables, outside backs, hit-up forwards, and wide-running forwards). The GPS devices provided instantaneous raw velocity data at 5 Hz, which were exported to a customized spreadsheet. The spreadsheet provided calculations for speed-based distances (eg, total distance; high-speed running, >14.4 km/h; and very-high-speed running, >18.1 km/h) and metabolic-power variables (eg, energy expenditure; average metabolic power; and high-power distance, >20 W/kg). The data show that speed-based distances and metabolic power varied between positional groups, although this was largely related to differences in time spent on field. The distance covered at high running speed was lower than that obtained from high-power thresholds for all positional groups; however, the difference between the 2 methods was greatest for hit-up forwards and adjustables. Positional differences existed for all metabolic parameters, although these are at least partially related to time spent on the field. Higher-speed running may underestimate the demands of match play when compared with high-power distance-although the degree of difference between the measures varied by position. The analysis of metabolic power may complement traditional speed-based classifications and improve our understanding of the demands of rugby league match play.

RHIC forward experiment to study √s dependence of forward particle production

Directory of Open Access Journals (Sweden)

Sako T.

2017-01-01

Full Text Available The Relativistic Heavy Ion Collider forward experiment is ready to take data in the RHIC Run2017 √s = 510 GeV p-p collisions using the LHCf Arm1 detector. New accelerator data are valuable to verify the Feynman scaling of FX1 production and to study the evolution of the break of scaling in neutron production. Using the transversely polarized proton beam, asymmetric production of forward neutrons is precisely measured. That is useful to understand the fundamental meson exchange in the proton-proton collisions.

Buck-Boost/Forward Hybrid Converter for PV Energy Conversion Applications

Directory of Open Access Journals (Sweden)

Sheng-Yu Tseng

2014-01-01

Full Text Available This paper presents a charger and LED lighting (discharger hybrid system with a PV array as its power source for electronic sign indicator applications. The charger adopts buck-boost converter which is operated in constant current mode to charge lead-acid battery and with the perturb and observe method to extract maximum power of PV arrays. Their control algorithms are implemented by microcontroller. Moreover, forward converter with active clamp circuit is operated in voltage regulation condition to drive LED for electronic sign applications. To simplify the circuit structure of the proposed hybrid converter, switches of two converters are integrated with the switch integration technique. With this approach, the proposed hybrid converter has several merits, which are less component counts, lighter weight, smaller size, and higher conversion efficiency. Finally, a prototype of LED driving system under output voltage of 10 V and output power of 20 W has been implemented to verify its feasibility. It is suitable for the electronic sign indicator applications.

Very forward measurements at the LHC

CERN Document Server

Berretti, Mirko

2017-01-01

In this talk we present a selection of forward physics results recently obtained with the run-1 and run-2 LHC data by the CMS, LHCf and TOTEM experiments. The status of the very forward LHC proton spectrometer, CT-PPS, is discussed: emphasis is given to the physics potential of CT-PPS and to the analyses that are currently ongoing with the data collected in 2016. Very recent forward measurements obtained with the LHCf and the CMS-CASTOR calorimeter are then addressed. In particular, CMS measured the inclusive energy spectrum in the very forward direction for proton-proton collisions at a center-of-mass energy of 13 TeV and the jet cross sections for p+Pb collisions at 5.02 TeV. The LHCf experiment has instead recently published the inclusive energy spectra of forward photons for pp collisions at 13 TeV. Finally, the new measurements of the total, elastic and inelastic cross sections obtained by the TOTEM collaboration at 2.76 and 13 TeV center of mass energy are presented.

Multi-Input Converter with MPPT Feature for Wind-PV Power Generation System

Directory of Open Access Journals (Sweden)

Chih-Lung Shen

2013-01-01

Full Text Available A multi-input converter (MIC to process wind-PV power is proposed, designed, analyzed, simulated, and implemented. The MIC cannot only process solar energy but deal with wind power, of which structure is derived from forward-type DC/DC converter to step-down/up voltage for charger systems, DC distribution applications, or grid connection. The MIC comprises an upper modified double-ended forward, a lower modified double-ended forward, a common output inductor, and a DSP-based system controller. The two modified double-ended forwards can operate individually or simultaneously so as to accommodate the variation of the hybrid renewable energy under different atmospheric conditions. While the MIC operates at interleaving mode, better performance can be achieved and volume also is reduced. The proposed MIC is capable of recycling the energy stored in the leakage inductance and obtaining high step-up output voltage. In order to draw maximum power from wind turbine and PV panel, perturb-and-observe method is adopted to achieve maximum power point tracking (MPPT feature. The MIC is constructed, analyzed, simulated, and tested. Simulations and hardware measurements have demonstrated the feasibility and functionality of the proposed multi-input converter.

Problems and possibilities of establishing greenery within nuclear power plant areas

International Nuclear Information System (INIS)

Supuka, J.

1987-01-01

The environmental impacts of nuclear power plants are briefly discussed. The arrangement of the green in the area of nuclear power plants is illustrated by an example of the territorial plans of the Bohunice nuclear power plants. The green must fullfil multiple functions, such as architectonical, aesthetical, wind protection, dust protection, noise and radioactivity protection, soil improvement, psychological, soil reclamation, renaturalization, and social functions. The green zones are differentiated into the actual plant zone, the hygiene protection zone, the accompanying green zone, and the peripheral housing development green zone. (M.D.). 6 figs., 1 tab., 7 refs

Cross sections and transverse single-spin asymmetries in forward jet production from proton collisions at s=500 GeV

Directory of Open Access Journals (Sweden)

L.C. Bland

2015-11-01

Full Text Available Measurements of the production of forward jets from transversely polarized proton collisions at s=500 GeV conducted at the Relativistic Heavy Ion Collider (RHIC are reported. Our measured jet cross section is consistent with hard scattering expectations. Our measured analyzing power for forward jet production is small and positive, and provides constraints on the Sivers functions that are related to partonic orbital angular momentum through theoretical models.

The role of hydroelectric power in energy economy

International Nuclear Information System (INIS)

Allet, B.

1989-01-01

The state of development and the technical potential of hydroelectric power worldwide, in Europe and in Switzerland are briefly compared with each other. Afterwards, the most important types of hydroelectric power stations and their function in the electricity-distribution network, are put forward. The realistic possibilities of development in Switzerland, up to the year 2025, of each type of hydroelectric power station is judged with regard to the currently valid regulations. The effects of the peoples' initiative - 'towards the salvation of our waters' or for stricter regulations for the protection of water - on the chances of realisation of these possibilities of development are shown. The forseeable decrease in the production of energy by the existing hydroelectric power stations, as a result of the regulation planned for rest water, is judged. Various forecasts for the future quantity of hydroelectric power production in Switzerland are put forward. 6 figs., 7 tabs., 12 refs

Joint Power Allocation and Beamforming in Amplify-and-Forward Relay Networks under Per-Node Power Constraint

Directory of Open Access Journals (Sweden)

Farzin Azami

2017-01-01

Full Text Available Two-way relay networks (TWRN have been intensively investigated over the past decade due to their ability to enhance the performance assessment of networks in terms of cellular coverage and spectral efficiency. Yet, power control in such systems is a nontrivial issue, particularly in multirelay networks where relays are deployed to ensure a required Quality of Service (QoS. In this paper, we envision to address this critical issue by minimizing the sum-power with respect to per-node power consumption and acceptable users’ rates. To tackle this, we employ a variable transformation to turn the fractional quadratically constrained quadratic problem (QCQP into semidefinite programming (SDP. This algorithm is also extended to a distributed format. Simulation results of deploying 10 relay stations reveal that the total power consumption will decrease to approximately 8 dBW for 6 bps/Hz sum-rate.

Haiyang nuclear power construction management and practice

International Nuclear Information System (INIS)

Wang Fengxue

2010-01-01

The paper introduces the basic situation of Shandong Haiyang Nuclear Power Plant, as well as the management and progress of the project. Through the construction management practice, problems encountered in nuclear power construction are put forward for peer exchange and discussion. (author)

Reevaluation of the emergency planning zone for nuclear power plants in Taiwan using MACCS2 code

International Nuclear Information System (INIS)

Wu, J.; Yang, Y.-M.; Chen, I.-J.; Chen, H.-T.; Chuang, K.-S.

2006-01-01

According to government regulations, the emergency planning zone (EPZ) of a nuclear power plant (NPP) must be designated before operation and reevaluated every 5 years. Corresponding emergency response planning (ERP) has to be made in advance to guarantee that all necessary resources are available under accidental releases of radioisotope. In this study, the EPZ for each of the three operating NPPs, Chinshan, Kuosheng, and Maanshan, in Taiwan was reevaluated using the MELCOR Accident Consequence Code System 2 (MACCS2) developed by Sandia National Laboratory. Meteorological data around the nuclear power plant were collected during 2003. The source term data including inventory, sensible heat content, and timing duration, were based on previous PRA information of each plant. The effective dose equivalent and thyroid dose together with the related individual risk and societal risk were calculated. By comparing the results to the protective action guide and related safety criteria, 1.5, 1.5, and 4.5 km were estimated for Chinshan, Kuosheng, and Maanshan NPPs, respectively. We suggest that a radius of 5.0 km is a reasonably conservative value of EPZ for each of the three operating NPPs in Taiwan

Constructing forward price curves in electricity markets

DEFF Research Database (Denmark)

Fleten, S.-E.; Lemming, Jørgen Kjærgaard

2003-01-01

We present and analyze a method for constructing approximated high-resolution forward price curves in electricity markets. Because a limited number of forward or futures contracts are traded in the market, only a limited picture of the theoretical continuous forward price curve is available...... to the analyst. Our method combines the information contained in observed bid and ask prices with information from the forecasts generated by bottom-up models. As an example, we use information concerning the shape of the seasonal variation from a bottom-up model to improve the forward price curve quoted...

Combining or Separating Forward and Reverse Logistics

DEFF Research Database (Denmark)

Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel; Nielsen, Anders

2018-01-01

Purpose – While forward logistics handles and manages the flow of goods downstream in the supply chain from suppliers to customers, reverse logistics (RL) manages the flow of returned goods upstream. A firm can combine reverse logistics with forward logistics, keep the flows separated, or choose......-research addresses intra-RL issues while the relationship between forward and reverse logistics is under-researched. This paper contributes to RL-theory by identifying the contextual factors that determine the most advantageous relationship between forward and reverse logistics, and proposes a novel decision making...

The forwarding indices of graphs - a survey

Directory of Open Access Journals (Sweden)

Jun-Ming Xu

2013-01-01

Full Text Available A routing \\(R\\ of a connected graph \\(G\\ of order \\(n\\ is a collection of \\(n(n-1\\ simple paths connecting every ordered pair of vertices of \\(G\\. The vertex-forwarding index \\(\\xi(G,R\\ of \\(G\\ with respect to a routing \\(R\\ is defined as the maximum number of paths in \\(R\\ passing through any vertex of \\(G\\. The vertex-forwarding index \\(\\xi(G\\ of \\(G\\ is defined as the minimum \\(\\xi(G,R\\ over all routings \\(R\\ of \\(G\\. Similarly, the edge-forwarding index \\(\\pi(G,R\\ of \\(G\\ with respect to a routing \\(R\\ is the maximum number of paths in \\(R\\ passing through any edge of \\(G\\. The edge-forwarding index \\(\\pi(G\\ of \\(G\\ is the minimum \\(\\pi(G,R\\ over all routings \\(R\\ of \\(G\\. The vertex-forwarding index or the edge-forwarding index corresponds to the maximum load of the graph. Therefore, it is important to find routings minimizing these indices and thus has received much research attention for over twenty years. This paper surveys some known results on these forwarding indices, further research problems and several conjectures, also states some difficulty and relations to other topics in graph theory.

Precoding Design of MIMO Amplify-and-Forward Communication System With an Energy Harvesting Relay and Possibly Imperfect CSI

KAUST Repository

Benkhelifa, Fatma; Alouini, Mohamed-Slim

2017-01-01

In this paper, we investigate the simultaneous wireless information and power transfer (SWIPT) in a Multiple-Input Multiple-Output (MIMO) Amplify-and-Forward (AF) relay communication system where the relay is an energy harvesting (EH) node

Forward Osmosis Process

KAUST Repository

Duan, Jintang

2013-12-05

A process that can alleviate the internal concentration polarization and can enhance membrane performance of a forward osmosis system includes the steps of passing a fluid in a forward osmosis system from a feed solution with a first osmotic pressure, through a membrane into a draw solution comprising a draw solute with a second osmotic pressure, where the first osmotic pressure is lower than the second osmotic pressure, the membrane includes an active layer and a support layer, and the membrane is oriented such that the active layer of the membrane faces a draw side, and the support layer faces a feed side; and applying an external force to the fluid on the feed side of the membrane.

Forward Osmosis Process

KAUST Repository

Duan, Jintang; Pinnau, Ingo; Litwiller, Eric

2013-01-01

A process that can alleviate the internal concentration polarization and can enhance membrane performance of a forward osmosis system includes the steps of passing a fluid in a forward osmosis system from a feed solution with a first osmotic pressure, through a membrane into a draw solution comprising a draw solute with a second osmotic pressure, where the first osmotic pressure is lower than the second osmotic pressure, the membrane includes an active layer and a support layer, and the membrane is oriented such that the active layer of the membrane faces a draw side, and the support layer faces a feed side; and applying an external force to the fluid on the feed side of the membrane.

Bistatic Forward Scattering Radar Detection and Imaging

Directory of Open Access Journals (Sweden)

Hu Cheng

2016-06-01

Full Text Available Forward Scattering Radar (FSR is a special type of bistatic radar that can implement image detection, imaging, and identification using the forward scattering signals provided by the moving targets that cross the baseline between the transmitter and receiver. Because the forward scattering effect has a vital significance in increasing the targets’ Radar Cross Section (RCS, FSR is quite advantageous for use in counter stealth detection. This paper first introduces the front line technology used in forward scattering RCS, FSR detection, and Shadow Inverse Synthetic Aperture Radar (SISAR imaging and key problems such as the statistical characteristics of forward scattering clutter, accurate parameter estimation, and multitarget discrimination are then analyzed. Subsequently, the current research progress in FSR detection and SISAR imaging are described in detail, including the theories and experiments. In addition, with reference to the BeiDou navigation satellite, the results of forward scattering experiments in civil aircraft detection are shown. Finally, this paper considers future developments in FSR target detection and imaging and presents a new, promising technique for stealth target detection.

Development of a Forward Model for the Assimilation of Delay-Doppler Maps (DDMs)

Science.gov (United States)

Garrison, J. L.; Huang, F.; Leidner, M.; Annane, B.; Hoffman, R.

2017-12-01

Ocean wind measurements from CYGNSS have the potential to improve the observation and analysis of tropical cyclones globally. The standard Level-2 wind product, however, is defined by the 25-km spatial resolution requirement using only 15 out of a total of 187 delay-Doppler bins. The full forward model relating a surface wind field to the delay-Doppler map (DDM) involves a surface integral over the glistening zone (which can be expressed in a variety of more numerically efficient convolutional forms) and incorporates variation of the receiver antenna pattern over the surface. Combined with the well-known ambiguity in the mapping between surface coordinates and delay-Doppler space, this model cannot be inverted to provide wind speed estimates away from the specular point. Two approaches are being studied to improve wind retrievals through use of the full DDM. The first uses sequential DDM measurements which cover a large common area on the sea surface, but provide some variation in geometry due to satellite motion. An Extended Kalman filter (EKF) is used to integrate these sequential observations. Numerical simulations have been performed to show the sensitivity of the filter stability to the initial covariance matrix. Although it was found that the EKF wind field still retains artifacts of the delay-Doppler ambiguity, the wind speed at the specular point can be estimated with lower error than that of the baseline Level 2 products. Another approach is to assimilate DDMs directly into a 2-dimensional, Variational vector wind Analysis Method (VAM). Sample results from this forward model will be generated from idealized and real wind fields, and compared to results from the CYGNSS Science Team End-to-End simulator (E2ES). In both of these approaches, an accurate forward model for the calibrated level 1a DDM data is required. This presentation will emphasize the development of this model and the results of testing the forward model through comparison with early CYGNSS

Forward and backward THz-wave difference frequency generations from a rectangular nonlinear waveguide.

Science.gov (United States)

Huang, Yen-Chieh; Wang, Tsong-Dong; Lin, Yen-Hou; Lee, Ching-Han; Chuang, Ming-Yun; Lin, Yen-Yin; Lin, Fan-Yi

2011-11-21

We report forward and backward THz-wave difference frequency generations at 197 and 469 μm from a PPLN rectangular crystal rod with an aperture of 0.5 (height in z) × 0.6 (width in y) mm(2) and a length of 25 mm in x. The crystal rod appears as a waveguide for the THz waves but as a bulk material for the optical mixing waves near 1.54 μm. We measured enhancement factors of 1.6 and 1.8 for the forward and backward THz-wave output powers, respectively, from the rectangular waveguide in comparison with those from a PPLN slab waveguide of the same length, thickness, and domain period under the same pump and signal intensity of 100 MW/cm(2). © 2011 Optical Society of America

Forward planning

International Nuclear Information System (INIS)

Fontenla, D.P.

2008-01-01

By definition, forward planning is a process where input consists of conditions on beam configurations and parameters and output consists of dose distributions on target and critical structures, in contrast to inverse planning, where the opposite is true. For forward planning IMRT, criteria are as follows: (i) Plans created as an extension of standard 3D conformational planning; (ii) No significant increase in the complexity of the treatment planning or treatment delivery process; (3) Treatment verification using standard QA procedures; and process consists of the following steps: (i) Create a standard 3D conformational treatment plan; (ii) Copy one of the existing beams; (iii) Create control points: design new beam segments, blocking high dose areas; (iv) Repeat for all beams; (v) Re-compute dose; and (vi) Adjust control points weights to achieve desired dose distribution. A detailed exposition, with many clinical examples, is given for the breast, lung, and brain (P.A.)

Hanford spent nuclear fuel project recommended path forward, volume III: Alternatives and path forward evaluation supporting documentation

International Nuclear Information System (INIS)

Fulton, J.C.

1994-10-01

Volume I of the Hanford Spent Nuclear Fuel Project - Recommended Path Forward constitutes an aggressive series of projects to construct and operate systems and facilities to safely retrieve, package, transport, process, and store K Basins fuel and sludge. Volume II provided a comparative evaluation of four Alternatives for the Path Forward and an evaluation for the Recommended Path Forward. Although Volume II contained extensive appendices, six supporting documents have been compiled in Volume III to provide additional background for Volume II

Analysis of the interaction of participants freight forwarding system

Directory of Open Access Journals (Sweden)

Pavlo Popovych

2016-12-01

Full Text Available Main goal of this work is the analysis of the interaction of participants of freight forwarding activities. Research methods included analysis of scientific literature, theory of systems and systems analysis, methods of induction and deduction. As sources of information used and applied work of fundamental importance known foreign and local scientists and regulatory and legislative documents of Ukraine for the state transport policy. In the article the basic interactions of participants of freight forwarding activities. Classified components freight forwarding services. Assign the concept freight forwarding system and its aim. Established element and forms of cooperation in the freight forwarding system. The main task of forwarding companies are organizing, coordinating and ensuring the delivery from shipper to consignee. Freight forwarding company responsible for the timely delivery of the goods on the condition of preservation of the quantity and quality specified time conditions. Currently used methods are uneffective decision-making, leading to losses. These circumstances require improvement methodology management of freight forwarding companies. This is possible only using modern mathematical methods and information technologies that will improve the operation of freight forwarding companies. The article presents a theoretical exposition of the basic processes of interaction between participants in freight forwarding system. The article may be of interest to specialists of freight forwarding companies.

Fault Zone Resistivity Structure and Monitoring at the Taiwan Chelungpu Drilling Project (TCDP

Directory of Open Access Journals (Sweden)

Chih-Wen Chiang

2008-01-01

Full Text Available The Taiwan Chelungpu-fault drilling project (TCDP has undertaken scientific drilling and directly sampled the sub-surface rupture of the 1999 Chi-Chi earthquake. Audio-magnetotelluric (AMT measurements were used to investigate electrical resistivity structure at the TCDP site from 2004 - 2006. These data show a geoelectric strike direction of N15°E to N30°E. Inversion and forward modeling of the AMT data were used to generate a 1-D resistivity model that has a prominent low resistivity zone (< 10 ohm-m between depths of 1100 and 1500 m. When combined with porosity measurements, theAMT measurements imply that the ground water has a resistivity of 0.55 ohm-m at the depth of the fault zone.

Switch mode power supply

International Nuclear Information System (INIS)

Kim, Hui Jun

1993-06-01

This book concentrates on switch mode power supply. It has four parts, which are introduction of switch mode power supply with DC-DC converter such as Buck converter boost converter, Buck-boost converter and PWM control circuit, explanation for SMPS with DC-DC converter modeling and power mode control, resonance converter like resonance switch, converter, multi resonance converter and series resonance and parallel resonance converters, basic test of SMPS with PWM control circuit, Buck converter, Boost converter, flyback converter, forward converter and IC for control circuit.

Management Accounting in freight-forwarding companies

DEFF Research Database (Denmark)

Jensen, Jens Ocksen; Lynggaard, Peter

2002-01-01

The article describes the internal business management processes in a freight forwarding compagny on the operative/tactical level. This is done as an explorative study of how these processes are organized in two medium-sized Danish freight-forwarding compagnies....

Multihop Capability Analysis in Wireless Information and Power Transfer Multirelay Cooperative Networks

Directory of Open Access Journals (Sweden)

Qilin Wu

2018-01-01

Full Text Available We study simultaneous wireless information and power transfer (SWIPT in multihop wireless cooperative networks, where the multihop capability that denotes the largest number of transmission hops is investigated. By utilizing the broadcast nature of multihop wireless networks, we first propose a cooperative forwarding power (CFP scheme. In CFP scheme, the multiple relays and receiver have distinctly different tasks. Specifically, multiple relays close to the transmitter harvest power from the transmitter first and then cooperatively forward the power (not the information towards the receiver. The receiver receives the information (not the power from the transmitter first, and then it harvests the power from the relays and is taken as the transmitter of the next hop. Furthermore, for performance comparison, we suggest two schemes: cooperative forwarding information and power (CFIP and direct receiving information and power (DFIP. Also, we construct an analysis model to investigate the multihop capabilities of CFP, CFIP, and DFIP schemes under the given targeted throughput requirement. Finally, simulation results validate the analysis model and show that the multihop capability of CFP is better than CFIP and DFIP, and for improving the multihop capabilities, it is best effective to increase the average number of relay nodes in cooperative set.

An Improvement on the Junction Temperature Measurement of Light-Emitting Diodes by using the Peak Shift Method Compared with the Forward Voltage Method

International Nuclear Information System (INIS)

He Su-Ming; Wang Jin-Bin; Luo Xiang-Dong; Zhang Bo; Fu Lei; Cheng Li-Wen; Lu Wei

2012-01-01

The junction temperature of red, green and blue high power light emitting diodes (LEDs) is measured by using the emission peak shift method and the forward voltage method. Both the emission peak shift and the forward voltage decrease show a linear relationship relative to junction temperature. The linear coefficients of the red, green and blue LEDs for the peak shift method and the forward voltage method range from 0.03 to 0.15 nm/°C and from 1.33 to 3.59 mV/°C, respectively. Compared with the forward voltage method, the peak shift method is almost independent of bias current and sample difference. The variation of the slopes is less than 2% for the peak shift method and larger than 30% for the forward voltage method, when the LEDs are driven by different bias currents. It is indicated that the peak shift method gives better stability than the forward voltage method under different LED working conditions

Why do firms engage in forward-looking search?

DEFF Research Database (Denmark)

Jissink, Tymen; Rohrbeck, René; Huizingh, Eelko K.R.E.

firms with a low level of slack resources engage to a much lower extent into forward-looking search, if they operate in high-competitive-intensity environments. Our findings not only carry important implications for predicting a firm’s engagement in forward-looking search, but also potentially...... performed below aspirations are less likely to engage in forward-looking search, suggesting that forward-looking search is not a form of problemistic search. In contrast, firms that have abundant uncommitted (slack) resources as well as firms expecting to outperform in the near future are engaging more...... into forward-looking search. We also find interaction effect between performance feedback and environmental characteristics. Interestingly firms with a high level of slack resources are only surpassing their less rich peers in forward-looking search, if they are in technologically turbulent environments. Also...

Root-cause Investigation for No Setback Initiation at Liquid Zone Control Unit Perturbation in CANDU6 Reactor

Energy Technology Data Exchange (ETDEWEB)

Park, Donghwan; Kim, Youngae; Kim, Sungmin [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Liquid zone control system (LZCS) is one of the indigenous systems in CANDU type reactor for reactor reactivity control. The LZCS is filled with light water and used to provide a continuous fine control of the reactivity and the reactor power level. This system is also designed to accomplish spatial control of the power distribution, automatically, which prevents xenon induced power oscillations. As the tilt control term is phased out, it is replaced by a level control term, which tends to drive the individual zone levels towards the average level of all the zones. Most of CANDU reactors have been experienced these events. Generally setback or stepback conditions are on when variables of spatial control off, high zone power, etc. are reached to the initiating conditions before ROP trip. But the condition of setback or stepback is not initiated before ROP trip sometime. In this study the root-causes for this event are investigated, and the impact assessment is performed by physics computational modeling. To investigate the root-cause of ROP trip before initiating setback at abnormal operating condition, some LZC perturbation models were simulated and investigated the neutron flux readings of zone detector and ROP detector. Two root-causes were founded. The first, flux variation by water level change is more gradual than other zones due to design characteristics in zone 03. The second, ROP detector (SDS no. 2 3G) in the near zone 03 is very sensitive below 40% of water level due to ROP detector installed position. Even though setback is initiated earlier than ROP trip in case of zone 03 perturbation, ROP trip will be occurred because power decreasing rate is very slow(0.1%/sec) on setback condition.

A Design of Wireless Sensor Networks for a Power Quality Monitoring System

Directory of Open Access Journals (Sweden)

Sanggil Kang

2010-11-01

Full Text Available Power grids deal with the business of generation, transmission, and distribution of electric power. Recently, interest in power quality in electrical distribution systems has increased rapidly. In Korea, the communication network to deliver voltage, current, and temperature measurements gathered from pole transformers to remote monitoring centers employs cellular mobile technology. Due to high cost of the cellular mobile technology, power quality monitoring measurements are limited and data gathering intervals are large. This causes difficulties in providing the power quality monitoring service. To alleviate the problems, in this paper we present a communication infrastructure to provide low cost, reliable data delivery. The communication infrastructure consists of wired connections between substations and monitoring centers, and wireless connections between pole transformers and substations. For the wireless connection, we employ a wireless sensor network and design its corresponding data forwarding protocol to improve the quality of data delivery. For the design, we adopt a tree-based data forwarding protocol in order to customize the distribution pattern of the power quality information. We verify the performance of the proposed data forwarding protocol quantitatively using the NS-2 network simulator.

A design of wireless sensor networks for a power quality monitoring system.

Science.gov (United States)

Lim, Yujin; Kim, Hak-Man; Kang, Sanggil

2010-01-01

Power grids deal with the business of generation, transmission, and distribution of electric power. Recently, interest in power quality in electrical distribution systems has increased rapidly. In Korea, the communication network to deliver voltage, current, and temperature measurements gathered from pole transformers to remote monitoring centers employs cellular mobile technology. Due to high cost of the cellular mobile technology, power quality monitoring measurements are limited and data gathering intervals are large. This causes difficulties in providing the power quality monitoring service. To alleviate the problems, in this paper we present a communication infrastructure to provide low cost, reliable data delivery. The communication infrastructure consists of wired connections between substations and monitoring centers, and wireless connections between pole transformers and substations. For the wireless connection, we employ a wireless sensor network and design its corresponding data forwarding protocol to improve the quality of data delivery. For the design, we adopt a tree-based data forwarding protocol in order to customize the distribution pattern of the power quality information. We verify the performance of the proposed data forwarding protocol quantitatively using the NS-2 network simulator.

On Amplify-and-Forward Relaying Over Hyper-Rayleigh Fading Channels

Directory of Open Access Journals (Sweden)

S. H. Alvi

2014-12-01

Full Text Available Relayed transmission holds promise for the next generation of wireless communication systems due to the performance gains it can provide over non-cooperative systems. Recently hyper-Rayleigh fading, which represents fading conditions more severe than Rayleigh fading, has received attention in the context of many practical communication scenarios. Though power allocation for Amplify-and-Forward (AF relaying networks has been studied in the literature, a theoretical analysis of the power allocation problem for hyper-Rayleigh fading channels is a novel contribution of this work. We develop an optimal power allocation (OPA strategy for a dual-hop AF relaying network in which the relay-destination link experiences hyper-Rayleigh fading. A new closed-form expression for the average signal-to-noise ratio (SNR at destination is derived and it is shown to provide a new upper-bound on the average SNR at destination, which outperforms a previously proposed upper-bound based on the well-known harmonic-geometric mean inequality. An OPA across the source and relay nodes, subject to a sum-power constraint, is proposed and it is shown to provide measurable performance gains in average SNR and SNR outage at the destination relative to the case of equal power allocation.

Climate Wind Power Resources

Directory of Open Access Journals (Sweden)

Nana M. Berdzenishvili

2013-01-01

Full Text Available Georgia as a whole is characterized by rather rich solar energy resources, which allows to construct alternative power stations in the close proximity to traditional power plants. In this case the use of solar energy is meant. Georgia is divided into 5 zones based on the assessment of wind power resources. The selection of these zones is based on the index of average annual wind speed in the examined area, V> 3 m / s and V> 5 m / s wind speed by the summing duration in the course of the year and V = 0. . . 2 m / s of passive wind by total and continuous duration of these indices per hour.

Forward-looking report of the electricity supply-demand balance in France. 2011

International Nuclear Information System (INIS)

2011-01-01

After an introduction presenting the objective of this report and the method used for its predictions, this document proposes an analysis of energy consumption: past trends, context of predictions, building up of predictions, global predictions, impact of demand control, comparison with a previous forward-looking assessment, comparison with other scenarios and other European countries. It analyses and discusses power consumption predictions (electricity consumption time variations, load curve evolution perspectives, peak power), production supply (current stock, thermal nuclear, thermal fossil, thermal decentralized, hydroelectric, wind energy, and photovoltaic production), the evolution of the supply-demand balance on a medium term for France and for two French regions. It finally proposes a long term prospective vision regarding energy

Computational modeling of a forward lunge

DEFF Research Database (Denmark)

Alkjær, Tine; Wieland, Maja Rose; Andersen, Michael Skipper

2012-01-01

during forward lunging. Thus, the purpose of the present study was to establish a musculoskeletal model of the forward lunge to computationally investigate the complete mechanical force equilibrium of the tibia during the movement to examine the loading pattern of the cruciate ligaments. A healthy female...... was selected from a group of healthy subjects who all performed a forward lunge on a force platform, targeting a knee flexion angle of 90°. Skin-markers were placed on anatomical landmarks on the subject and the movement was recorded by five video cameras. The three-dimensional kinematic data describing...... the forward lunge movement were extracted and used to develop a biomechanical model of the lunge movement. The model comprised two legs including femur, crus, rigid foot segments and the pelvis. Each leg had 35 independent muscle units, which were recruited according to a minimum fatigue criterion...

Wind power and market power in competitive markets

International Nuclear Information System (INIS)

Twomey, Paul; Neuhoff, Karsten

2010-01-01

Average market prices for intermittent generation technologies are lower than for conventional generation. This has a technical reason but can be exaggerated in the presence of market power. When there is much wind smaller amounts of conventional generation technologies are required, and prices are lower, while at times of little wind prices are higher. This effect reflects the value of different generation technologies to the system. But under conditions of market power, conventional generators with market power can further depress the prices if they have to buy back energy at times of large wind output and can increase prices if they have to sell additional power at times of little wind output. This greatly exaggerates the effect. Forward contracting does not reduce the effect. An important consequence is that allowing market power profit margins as a support mechanism for generation capacity investment is not a technologically neutral policy.

Forward Λ production and nuclear stopping power in d+Au collisions at sNN=200 GeV

Science.gov (United States)

Abelev, B. I.; Aggarwal, M. M.; Ahammed, Z.; Anderson, B. D.; Arkhipkin, D.; Averichev, G. S.; Bai, Y.; Balewski, J.; Barannikova, O.; Barnby, L. S.; Baudot, J.; Baumgart, S.; Belaga, V. V.; Bellingeri-Laurikainen, A.; Bellwied, R.; Benedosso, F.; Betts, R. R.; Bhardwaj, S.; Bhasin, A.; Bhati, A. K.; Bichsel, H.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Blyth, S.-L.; Bombara, M.; Bonner, B. E.; Botje, M.; Bouchet, J.; Brandin, A. V.; Bravar, A.; Burton, T. P.; Bystersky, M.; Cai, X. Z.; Caines, H.; Sánchez, M. Calderón De La Barca; Callner, J.; Catu, O.; Cebra, D.; Cervantes, M. C.; Chajecki, Z.; Chaloupka, P.; Chattopadhyay, S.; Chen, H. F.; Chen, J. H.; Chen, J. Y.; Cheng, J.; Cherney, M.; Chikanian, A.; Christie, W.; Chung, S. U.; Clarke, R. F.; Codrington, M. J. M.; Coffin, J. P.; Cormier, T. M.; Cosentino, M. R.; Cramer, J. G.; Crawford, H. J.; Das, D.; Dash, S.; Daugherity, M.; Moura, M. M. De; Dedovich, T. G.; Dephillips, M.; Derevschikov, A. A.; Didenko, L.; Dietel, T.; Djawotho, P.; Dogra, S. M.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, F.; Dunin, V. B.; Dunlop, J. C.; Mazumdar, M. R. Dutta; Eckardt, V.; Edwards, W. R.; Efimov, L. G.; Emelianov, V.; Engelage, J.; Eppley, G.; Erazmus, B.; Estienne, M.; Fachini, P.; Fatemi, R.; Fedorisin, J.; Feng, A.; Filip, P.; Finch, E.; Fine, V.; Fisyak, Y.; Fu, J.; Gagliardi, C. A.; Gaillard, L.; Ganti, M. S.; Garcia-Solis, E.; Ghazikhanian, V.; Ghosh, P.; Gorbunov, Y. N.; Gos, H.; Grebenyuk, O.; Grosnick, D.; Grube, B.; Guertin, S. M.; Guimaraes, K. S. F. F.; Gupta, N.; Haag, B.; Hallman, T. J.; Hamed, A.; Harris, J. W.; He, W.; Heinz, M.; Henry, T. W.; Heppelmann, S.; Hippolyte, B.; Hirsch, A.; Hjort, E.; Hoffman, A. M.; Hoffmann, G. W.; Hofman, D. J.; Hollis, R. S.; Horner, M. J.; Huang, H. Z.; Hughes, E. W.; Humanic, T. J.; Igo, G.; Iordanova, A.; Jacobs, P.; Jacobs, W. W.; Jakl, P.; Jia, F.; Jones, P. G.; Judd, E. G.; Kabana, S.; Kang, K.; Kapitan, J.; Kaplan, M.; Keane, D.; Kechechyan, A.; Kettler, D.; Khodyrev, V. Yu.; Kiryluk, J.; Kisiel, A.; Kislov, E. M.; Klein, S. R.; Knospe, A. G.; Kocoloski, A.; Koetke, D. D.; Kollegger, T.; Kopytine, M.; Kotchenda, L.; Kouchpil, V.; Kowalik, K. L.; Kravtsov, P.; Kravtsov, V. I.; Krueger, K.; Kuhn, C.; Kulikov, A. I.; Kumar, A.; Kurnadi, P.; Kuznetsov, A. A.; Lamont, M. A. C.; Landgraf, J. M.; Lange, S.; Lapointe, S.; Laue, F.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, C.-H.; Lehocka, S.; Levine, M. J.; Li, C.; Li, Q.; Li, Y.; Lin, G.; Lin, X.; Lindenbaum, S. J.; Lisa, M. A.; Liu, F.; Liu, H.; Liu, J.; Liu, L.; Ljubicic, T.; Llope, W. J.; Longacre, R. S.; Love, W. A.; Lu, Y.; Ludlam, T.; Lynn, D.; Ma, G. L.; Ma, J. G.; Ma, Y. G.; Mahapatra, D. P.; Majka, R.; Mangotra, L. K.; Manweiler, R.; Margetis, S.; Markert, C.; Martin, L.; Matis, H. S.; Matulenko, Yu. A.; McClain, C. J.; McShane, T. S.; Melnick, Yu.; Meschanin, A.; Millane, J.; Miller, M. L.; Minaev, N. G.; Mioduszewski, S.; Mischke, A.; Mitchell, J.; Mohanty, B.; Morozov, D. A.; Munhoz, M. G.; Nandi, B. K.; Nattrass, C.; Nayak, T. K.; Nelson, J. M.; Nepali, C.; Netrakanti, P. K.; Nogach, L. V.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Okorokov, V.; Oldenburg, M.; Olson, D.; Pachr, M.; Pal, S. K.; Panebratsev, Y.; Pavlinov, A. I.; Pawlak, T.; Peitzmann, T.; Perevoztchikov, V.; Perkins, C.; Peryt, W.; Phatak, S. C.; Planinic, M.; Pluta, J.; Poljak, N.; Porile, N.; Poskanzer, A. M.; Potekhin, M.; Potrebenikova, E.; Potukuchi, B. V. K. S.; Prindle, D.; Pruneau, C.; Pruthi, N. K.; Putschke, J.; Qattan, I. A.; Raniwala, R.; Raniwala, S.; Ray, R. L.; Relyea, D.; Ridiger, A.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Rose, A.; Roy, C.; Ruan, L.; Russcher, M. J.; Sahoo, R.; Sakrejda, I.; Sakuma, T.; Salur, S.; Sandweiss, J.; Sarsour, M.; Sazhin, P. S.; Schambach, J.; Scharenberg, R. P.; Schmitz, N.; Seger, J.; Selyuzhenkov, I.; Seyboth, P.; Shabetai, A.; Shahaliev, E.; Shao, M.; Sharma, M.; Shen, W. Q.; Shimanskiy, S. S.; Sichtermann, E. P.; Simon, F.; Singaraju, R. N.; Smirnov, N.; Snellings, R.; Sorensen, P.; Sowinski, J.; Speltz, J.; Spinka, H. M.; Srivastava, B.; Stadnik, A.; Stanislaus, T. D. S.; Staszak, D.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Suaide, A. A. P.; Suarez, M. C.; Subba, N. L.; Sumbera, M.; Sun, X. M.; Sun, Z.; Surrow, B.; Symons, T. J. M.; Toledo, A. Szanto De; Takahashi, J.; Tang, A. H.; Tarnowsky, T.; Thomas, J. H.; Timmins, A. R.; Timoshenko, S.; Tokarev, M.; Trainor, T. A.; Trentalange, S.; Tribble, R. E.; Tsai, O. D.; Ulery, J.; Ullrich, T.; Underwood, D. G.; Buren, G. Van; Kolk, N. Van Der; Leeuwen, M. Van; Molen, A. M. Vander; Varma, R.; Vasilevski, I. M.; Vasiliev, A. N.; Vernet, R.; Vigdor, S. E.; Viyogi, Y. P.; Vokal, S.; Voloshin, S. A.; Wada, M.; Waggoner, W. T.; Wang, F.; Wang, G.; Wang, J. S.; Wang, X. L.; Wang, Y.; Webb, J. C.; Westfall, G. D.; , C. Whitten, Jr.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, J.; Wu, Y.; Xu, N.; Xu, Q. H.; Xu, Z.; Yepes, P.; Yoo, I.-K.; Yue, Q.; Yurevich, V. I.; Zawisza, M.; Zhan, W.; Zhang, H.; Zhang, W. M.; Zhang, Y.; Zhang, Z. P.; Zhao, Y.; Zhong, C.; Zhou, J.; Zoulkarneev, R.; Zoulkarneeva, Y.; Zubarev, A. N.; Zuo, J. X.

2007-12-01

We report the measurement of Λ and Λ¯ yields and inverse slope parameters in d+Au collisions at sNN=200 GeV at forward and backward rapidities (y=±2.75), using data from the STAR forward time projection chambers. The contributions of different processes to baryon transport and particle production are probed exploiting the inherent asymmetry of the d+Au system. Comparisons to model calculations show that baryon transport on the deuteron side is consistent with multiple collisions of the deuteron nucleons with gold participants. On the gold side, HIJING-based models without a hadronic rescattering phase do not describe the measured particle yields, while models that include target remnants or hadronic rescattering do. The multichain model can provide a good description of the net baryon density in d+Au collisions at energies currently available at the BNL Relativistic Heavy Ion Collider, and the derived parameters of the model agree with those from nuclear collisions at lower energies.

Asymptotic analysis of the Forward Search

DEFF Research Database (Denmark)

Johansen, Søren; Nielsen, Bent

The Forward Search is an iterative algorithm concerned with detection of outliers and other unsuspected structures in data. This approach has been suggested, analysed and applied for regression models in the monograph Atkinson and Riani (2000). An asymptotic analysis of the Forward Search is made...

DLA Forward Stocking

National Research Council Canada - National Science Library

Flory, John

2007-01-01

.... This study evaluates the feasibility of forward stocking in terms of DoD savings. The performance of DLA's criteria is evaluated and a new criteria using a cost and demand threshold is proposed...

Computerized radiation control system in the Chernobyl 30-km zone

International Nuclear Information System (INIS)

Vasil'chenko, D.L.; Pis'mak, A.D.; Livertovskij, G.P.; Chikhladze, V.S.

1992-01-01

Computerized radiation control system is intended for monitoring radiation in the zone of radiation-hazardous objects for providing nuclear power station services with current information on radiactive situation in the zone of observation and the doses of radiation taken by the personnel. Described are tasks and functions of the system, as well as its structure. It is noted that unique conditions of the Chernobyl' 30-km zone open up opportunities for experiments and testing new models of equipment. 2 figs

The level of air pollution in the impact zone of coal-fired power plant (Karaganda City) using the data of geochemical snow survey (Republic of Kazakhstan)

OpenAIRE

Adil'bayeva, Т. E.; Talovskaya, Anna Valerievna; Yazikov, Yegor (Egor) Grigoryevich; Matveenko, Irina Alekseevna

2016-01-01

Coal-fired power plants emissions impact the air quality and human health. Of great significance is assessment of solid airborne particles emissions from those plants and distance of their transportation. The article presents the results of air pollution assessment in the zone of coal-fired power plant (Karaganda City) using snow survey. Based on the mass of solid airborne particles deposited in snow, time of their deposition on snow at the distance from 0.5 to 4.5 km a value of dust load has...

Storage and the electricity forward premium

International Nuclear Information System (INIS)

Douglas, Stratford; Popova, Julia

2008-01-01

We develop and test a model describing the influence of natural gas storage inventories on the electricity forward premium. The model is constructed by linking the effect of gas storage constraints on the higher moments of the distribution of electricity prices to an established model of the effect of those moments on the forward premium. The model predicts a sharply negative effect of gas storage inventories on the electricity forward premium when demand for electricity is high and space-heating demand for gas is low. Empirical results, based on PJM data, strongly support the model. (author)

Risk premium in the UK natural gas forward market

International Nuclear Information System (INIS)

Hobaek Haff, Ingrid; Lindqvist, Ola; Loeland, Anders

2008-01-01

This report investigates the UK natural gas market, and tests whether it is a fair-game efficient forward market, using forward contracts ranging from one to five months time to delivery. The forward and spot price series are separately non-stationary, but cointegrated. Furthermore, the forward prices are biased predictors of both the future spot and the 1-month-ahead forward price. The risk premium on the forward prices is positive, as opposed to the US gas market, where the risk premium was found to be negative in similar work. Moreover, the analysis reveals that the storage model is an incomplete model for the relationship between the spot and forward prices. However, storage has a clear effect on this relationship, an effect that appears to be non-linear. (author)

One-Dimensional Forward–Forward Mean-Field Games

Energy Technology Data Exchange (ETDEWEB)

Gomes, Diogo A., E-mail: diogo.gomes@kaust.edu.sa; Nurbekyan, Levon; Sedjro, Marc [King Abdullah University of Science and Technology (KAUST), CEMSE Division (Saudi Arabia)

2016-12-15

While the general theory for the terminal-initial value problem for mean-field games (MFGs) has achieved a substantial progress, the corresponding forward–forward problem is still poorly understood—even in the one-dimensional setting. Here, we consider one-dimensional forward–forward MFGs, study the existence of solutions and their long-time convergence. First, we discuss the relation between these models and systems of conservation laws. In particular, we identify new conserved quantities and study some qualitative properties of these systems. Next, we introduce a class of wave-like equations that are equivalent to forward–forward MFGs, and we derive a novel formulation as a system of conservation laws. For first-order logarithmic forward–forward MFG, we establish the existence of a global solution. Then, we consider a class of explicit solutions and show the existence of shocks. Finally, we examine parabolic forward–forward MFGs and establish the long-time convergence of the solutions.

Coronal Magnetism and Forward Solarsoft Idl Package

Science.gov (United States)

Gibson, S. E.

2014-12-01

The FORWARD suite of Solar Soft IDL codes is a community resource for model-data comparison, with a particular emphasis on analyzing coronal magnetic fields. FORWARD may be used both to synthesize a broad range of coronal observables, and to access and compare to existing data. FORWARD works with numerical model datacubes, interfaces with the web-served Predictive Science Inc MAS simulation datacubes and the Solar Soft IDL Potential Field Source Surface (PFSS) package, and also includes several analytic models (more can be added). It connects to the Virtual Solar Observatory and other web-served observations to download data in a format directly comparable to model predictions. It utilizes the CHIANTI database in modeling UV/EUV lines, and links to the CLE polarimetry synthesis code for forbidden coronal lines. FORWARD enables "forward-fitting" of specific observations, and helps to build intuition into how the physical properties of coronal magnetic structures translate to observable properties.

One-Dimensional Forward–Forward Mean-Field Games

KAUST Repository

Gomes, Diogo A.; Nurbekyan, Levon; Sedjro, Marc

2016-01-01

While the general theory for the terminal-initial value problem for mean-field games (MFGs) has achieved a substantial progress, the corresponding forward–forward problem is still poorly understood—even in the one-dimensional setting. Here, we consider one-dimensional forward–forward MFGs, study the existence of solutions and their long-time convergence. First, we discuss the relation between these models and systems of conservation laws. In particular, we identify new conserved quantities and study some qualitative properties of these systems. Next, we introduce a class of wave-like equations that are equivalent to forward–forward MFGs, and we derive a novel formulation as a system of conservation laws. For first-order logarithmic forward–forward MFG, we establish the existence of a global solution. Then, we consider a class of explicit solutions and show the existence of shocks. Finally, we examine parabolic forward–forward MFGs and establish the long-time convergence of the solutions.

One-Dimensional Forward–Forward Mean-Field Games

KAUST Repository

Gomes, Diogo A.

2016-11-01

While the general theory for the terminal-initial value problem for mean-field games (MFGs) has achieved a substantial progress, the corresponding forward–forward problem is still poorly understood—even in the one-dimensional setting. Here, we consider one-dimensional forward–forward MFGs, study the existence of solutions and their long-time convergence. First, we discuss the relation between these models and systems of conservation laws. In particular, we identify new conserved quantities and study some qualitative properties of these systems. Next, we introduce a class of wave-like equations that are equivalent to forward–forward MFGs, and we derive a novel formulation as a system of conservation laws. For first-order logarithmic forward–forward MFG, we establish the existence of a global solution. Then, we consider a class of explicit solutions and show the existence of shocks. Finally, we examine parabolic forward–forward MFGs and establish the long-time convergence of the solutions.

Analysis of the influence of the interlayer staggered zone in the basalt of Jinsha River Basin on the main buildings

Science.gov (United States)

Guo, Qiaona; Huang, Jiangwei

2018-02-01

In this paper, the finite element software FEFLOW is used to simulate the seepage field of the interlayer staggered zone C2 in the basalt of Jinsha River Basin. The influence of the interlayer staggered zone C2 on the building is analyzed. Combined with the waterproof effect of current design scheme of anti-seepage curtain, the seepage field in the interlayer staggered zone C2 is discussed under different design schemes. The optimal design scheme of anti-seepage curtain is put forward. The results showed that the case four can effectively reduce the head and hydraulic gradient of underground powerhouse area, and improve the groundwater seepage field in the plant area.

Probabilistic stability analysis: the way forward for stability analysis of sustainable power systems.

Science.gov (United States)

Milanović, Jovica V

2017-08-13

Future power systems will be significantly different compared with their present states. They will be characterized by an unprecedented mix of a wide range of electricity generation and transmission technologies, as well as responsive and highly flexible demand and storage devices with significant temporal and spatial uncertainty. The importance of probabilistic approaches towards power system stability analysis, as a subsection of power system studies routinely carried out by power system operators, has been highlighted in previous research. However, it may not be feasible (or even possible) to accurately model all of the uncertainties that exist within a power system. This paper describes for the first time an integral approach to probabilistic stability analysis of power systems, including small and large angular stability and frequency stability. It provides guidance for handling uncertainties in power system stability studies and some illustrative examples of the most recent results of probabilistic stability analysis of uncertain power systems.This article is part of the themed issue 'Energy management: flexibility, risk and optimization'. © 2017 The Author(s).

Naval Forward Presence

National Research Council Canada - National Science Library

Keledei, Raymond F

2006-01-01

.... Forward deployed Naval forces have consistently been stationed in the world s hotspots and are usually the first on the scene for emergent crises giving credence to the oft quoted line Where are the...

Rural Productivity Zones (RPZs) for microenterprises

Energy Technology Data Exchange (ETDEWEB)

Hansen, R.D.

1997-12-01

In this paper the authors discuss the concept of rural productivity zones (RPZs) which are defined as a business incubator to foster income-producing opportunities for the rural poor. The essential ingredients of such a program include: electric power; business development assistance; office services; and quality work space. The electric power source must be a good quality system, consisting of a diesel/wind/photovoltaic hybrid type system, providing reliable service, with a local maintenance program and a functional load management program.

The Logistical Aspects of Freight Transportation and Forwarding

Directory of Open Access Journals (Sweden)

Zimina Anna I.

2017-04-01

Full Text Available The article substantiates the theoretical and practical aspects of freight transportation and forwarding services based on the principles of logistics. The indicators of dynamics of freight transportation in Ukraine compared to last year and the structure by types of transport have been provided. The indicators of the foreign trade performance of Ukraine have been presented, including the counter-current export and import flows, as well as the external trade balance, which directly impacts the volume and dynamics of freight transportation and forwarding services. The main parameters of the transportation and forwarding logistics system were systematized, taking into consideration the technical and operational characteristics of the rolling stock, the route of communication, and the terminals. The role and features of the functions of the inter/multimodal transportation operators – freight forwarders of the «tonnage customers» have been considered. The article determines principles for the organization of work of freight forwarders, as well as the terms of agreement of the parties when the freight forwarding contract is concluded. The conditions for developing a logistics approach to the implementation of freight transportation and forwarding services have been generalized.

ATLAS Forward Proton Detector

CERN Document Server

Grieco, Chiara; The ATLAS collaboration

2018-01-01

The aim of the ATLAS Forward Proton (AFP) detector system is the measurement of protons scattered diffractively or electromagnetically at very small angles. The full two-arm setup was installed during the 2016/2017 EYETS. This allows measurements of processes with two forward protons: central diffraction, exclusive production, and two-photon processes. In 2017, AFP participated in the ATLAS high-luminosity data taking on the day-by-day basis. In addition, several special runs with reduced luminosity were taken. The poster will present the AFP detectors and the lessons learned from the last year operation and some performance from 2016 and 2017.

Piezoelectric power converter with bi-directional power transfer

DEFF Research Database (Denmark)

2014-01-01

The present invention relates to a bi-directional piezoelectric power converter com¬ prising a piezoelectric transformer. The piezoelectric transformer comprises an input electrode electrically coupled to a primary section of the piezoelectric transformer and an output electrode electrically...... coupled to an output section of the piezoelectric transformer to provide a transformer output signal. A bi-directional switching circuit is coupled between the output electrode and a DC or AC output voltage of the power converter. Forward and reverse current conducting periods of the bi......, a reverse current is conducted through the bi-directional switching circuit from the DC or AC output voltage to the output electrode to discharge the DC or AC output voltage and return power to the primary section of the piezoelectric transformer....

Forward coronary flow normally seen in systole is the result of both forward and concealed back flow

NARCIS (Netherlands)

Spaan, J. A.; Breuls, N. P.; Laird, J. D.

1981-01-01

Normally systolic coronary blood flow is almost entirely forward. As perfusion pressure was lowered through the autoregulatory range in open-chest dogs, net systolic back flow appeared at approximately 70 mm Hg. Imposing a series resistance (Rs), which impedes both forward and back flow, abolished

Selection combining for noncoherent decode-and-forward relay networks

Directory of Open Access Journals (Sweden)

Nguyen Ha

2011-01-01

Full Text Available Abstract This paper studies a new decode-and-forward relaying scheme for a cooperative wireless network composed of one source, K relays, and one destination and with binary frequency-shift keying modulation. A single threshold is employed to select retransmitting relays as follows: a relay retransmits to the destination if its decision variable is larger than the threshold; otherwise, it remains silent. The destination then performs selection combining for the detection of transmitted information. The average end-to-end bit-error-rate (BER is analytically determined in a closed-form expression. Based on the derived BER, the problem of choosing an optimal threshold or jointly optimal threshold and power allocation to minimize the end-to-end BER is also investigated. Both analytical and simulation results reveal that the obtained optimal threshold scheme or jointly optimal threshold and power-allocation scheme can significantly improve the BER performance compared to a previously proposed scheme.

Taking professional advantages, and pushing forward the development of nuclear power actively and steadily

International Nuclear Information System (INIS)

Wang Yingsu

2010-01-01

This paper introduces the efforts of Huaneng Nuclear Power Development Co., Ltd. HTR-building, commercial nuclear power plant construction, nuclear power plant sitting and other aspects since its establishment; points out the deficiencies of Huaneng nuclear power in management, talent pool and nuclear safety culture; says Huaneng Nuclear Power Development Co., Ltd. should accumulate experience through carrying out nuclear power projects, should participate nuclear power construction more widely through sharing nuclear power construction projects, and carries on the development programs of projects development of nuclear power related industries. (author)

Hovering and forward flight energetics in Anna's and Allen's hummingbirds.

Science.gov (United States)

Clark, Christopher James; Dudley, Robert

2010-01-01

Aerodynamic theory predicts that the mechanical costs of flight are lowest at intermediate flight speeds; metabolic costs of flight should trend similarly if muscle efficiency is constant. We measured metabolic rates for nine Anna's hummingbirds (Calypte anna) and two male Allen's hummingbirds (Selasphorus sasin) feeding during flight from a free-standing mask over a range of airspeeds. Ten of 11 birds exhibited higher metabolic costs during hovering than during flight at intermediate airspeeds, whereas one individual exhibited comparable costs at hovering and during forward flight up to speeds of approximately 7 m s(-1). Flight costs of all hummingbirds increased at higher airspeeds. Relative to Anna's hummingbirds, Allen's hummingbirds exhibited deeper minima in the power curve, possibly due to higher wing loadings and greater associated costs of induced drag. Although feeding at a mask in an airstream may reduce body drag and, thus, the contributions of parasite power to overall metabolic expenditure, these results suggest that hummingbird power curves are characterized by energetic minima at intermediate speeds relative to hovering costs.

Choice of antenna geometry for microwave power transmission from solar power satellites

Science.gov (United States)

Potter, Seth D.

1992-01-01

A comparison is made between square and circular transmitting antennas for solar power satellite microwave power transmission. It is seen that the exclusion zone around the rectenna needed to protect populations from microwaves is smaller for a circular antenna operating at 2.45 GHz than it is for a square antenna at that frequency. If the frequency is increased, the exclusion zone size remains the same for a square antenna, but becomes even smaller for a circular antenna. Peak beam intensity is the same for both antennas if the frequency and antenna area are equal. The circular antenna puts a somewhat greater amount of power in the main lobe and somewhat less in the side lobes. Since rain attenuation and atmospheric heating remain problems above 10 GHz, it is recommended that future solar power satellite work concentrate on circular transmitting antennas at frequencies of roughly 10 GHz.

Efficient packet forwarding using cyber-security aware policies

Science.gov (United States)

Ros-Giralt, Jordi

2017-10-25

For balancing load, a forwarder can selectively direct data from the forwarder to a processor according to a loading parameter. The selective direction includes forwarding the data to the processor for processing, transforming and/or forwarding the data to another node, and dropping the data. The forwarder can also adjust the loading parameter based on, at least in part, feedback received from the processor. One or more processing elements can store values associated with one or more flows into a structure without locking the structure. The stored values can be used to determine how to direct the flows, e.g., whether to process a flow or to drop it. The structure can be used within an information channel providing feedback to a processor.

A study of optimization problem for amplify-and-forward relaying over weibull fading channels

KAUST Repository

Ikki, Salama Said

2010-09-01

This paper addresses the power allocation and relay positioning problems in amplify-and-forward cooperative networks operating in Weibull fading environments. We study adaptive power allocation (PA) with fixed relay location, optimal relay location with fixed power allocation, and joint optimization of the PA and relay location under total transmit power constraint, in order to minimize the outage probability and average error probability at high signal-to-noise ratios (SNR). Analytical results are validated by numerical simulations and comparisons between the different optimization schemes and their performance are provided. Results show that optimum PA brings only coding gain, while optimum relay location yields, in addition to the latter, diversity gains as well. Also, joint optimization improves both, the diversity gain and coding gain. Furthermore, results illustrate that the analyzed adaptive algorithms outperform uniform schemes. ©2010 IEEE.

Forward Osmosis in Wastewater Treatment Processes

DEFF Research Database (Denmark)

Korenak, Jasmina; Basu, Subhankar; Balakrishnan, Malini

2017-01-01

In recent years, membrane technology has been widely used in wastewater treatment and water purification. Membrane technology is simple to operate and produces very high quality water for human consumption and industrial purposes. One of the promising technologies for water and wastewater treatment...... is the application of forward osmosis. Essentially, forward osmosis is a process in which water is driven through a semipermeable membrane from a feed solution to a draw solution due to the osmotic pressure gradient across the membrane. The immediate advantage over existing pressure driven membrane technologies...... briefly review some of the applications within water purification and new developments in forward osmosis membrane fabrication....

47 CFR 51.505 - Forward-looking economic cost.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Forward-looking economic cost. 51.505 Section... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.505 Forward-looking economic cost. (a) In general. The forward-looking economic cost of an element equals the sum of: (1) The total element long-run incremental...

Dynamics of 137Cs in the forests of the 30-km zone around the Chernobyl nuclear power plant

International Nuclear Information System (INIS)

Mamikhin, S.V.; Tikhomirov, F.A.; Shcheglov, A.I.

1997-01-01

Dynamics of the 137 Cs content in the components of the forests in the 30-km zone around the Chernobyl nuclear power plant (NPP) in 1986-1994 are associated mainly with such factors as the size of radioactive particles in the fallout, ecosystem humidification and soil type, tree age. The influence of particle size was especially noticeable between 1986-1987 and was displayed by low biological availability of radionuclides in the near part of the zone (within the 10-km radius circle around the NPP) in comparison with more distant regions (within the 30-km radius circle). Later, the expression of this influence decreased and transfer factor (the ratio of 137 Cs content in overground phytomass to the soil contamination density) became approximately the same for all plots with similar ecological and fallout characteristics. Humidity of landscape and soil type determined the velocity of radionuclide vertical migration in the soil and 137 Cs biological availability. These parameters were maximum for the hydromorphic soils of wet landscapes enriched in organic substance and poor clayey minerals. Differences of 137 Cs accumulation in overground phytomass of trees caused by tree age are displayed in the higher 137 Cs concentration in structural parts of young trees as compared with old ones

The cost of hovering and forward flight in a nectar-feeding bat, Glossophaga soricina, estimated from aerodynamic theory

DEFF Research Database (Denmark)

Norberg, U M; Kunz, T H; Steffensen, J F

1993-01-01

Energy expenditure during flight in animals can best be understood and quantified when both theoretical and empirical approaches are used concurrently. This paper examines one of four methods that we have used to estimate the cost of flight in a neotropical nectar-feeding bat Glossophaga soricina...... on metabolic power requirements estimated from nectar intake gives a mechanical efficiency of 0.15 for hovering flight and 0.11 for forward flight near the minimum power speed....

A generalized perturbation program for CANDU reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Do Heon; Kim, Jong Kyung [Hanyang University, Seoul (Korea, Republic of); Choi, Hang Bok; Roh, Gyu Hong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Yang, Won Sik [Chosun University, Kwangju (Korea, Republic of)

1999-12-31

A generalized perturbation program has been developed for the purpose of estimating zonal power variation of a CANDU reactor upon refueling operation. The forward and adjoint calculation modules of RFSP code were used to construct the generalized perturbation program. The numerical algorithm for the generalized adjoint flux calculation was verified by comparing the zone power estimates upon refueling with those of forward calculation. It was, however, noticed that the truncation error from the iteration process of the generalized adjoint flux is not negligible. 2 refs., 1 figs., 1 tab. (Author)

A generalized perturbation program for CANDU reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Do Heon; Kim, Jong Kyung [Hanyang University, Seoul (Korea, Republic of); Choi, Hang Bok; Roh, Gyu Hong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Yang, Won Sik [Chosun University, Kwangju (Korea, Republic of)

1998-12-31

A generalized perturbation program has been developed for the purpose of estimating zonal power variation of a CANDU reactor upon refueling operation. The forward and adjoint calculation modules of RFSP code were used to construct the generalized perturbation program. The numerical algorithm for the generalized adjoint flux calculation was verified by comparing the zone power estimates upon refueling with those of forward calculation. It was, however, noticed that the truncation error from the iteration process of the generalized adjoint flux is not negligible. 2 refs., 1 figs., 1 tab. (Author)

Forward calorimetry in the upgraded UA1 experiment

International Nuclear Information System (INIS)

Alvarez-Taviel, F.J.; Diez-Hedo, F.; Doncel, P.; Marquina, M.A.; Rodrigo, T.; Bacci, C.; Petrolo, E.; Tusi, A.; Ferrando, A.; Givernaud, A.; Rubbia, C.; Vuillemin, V.

1989-01-01

The major improvement in the upgraded UA1 calorimetry at the Santi ppS is the general use of ionization chambers filled with tetramethylpentane (TMP) as a detection medium interspersed with uranium plates as absorber. To achieve overall uniformity of detection down to very small angles, an identical solution is proposed for the forward calorimetry. Forward calorimetry is essential for good total and missing energy measurement at high luminosity in view of the increasing rate of multiple collisions. Both designs for forward and very forward calorimeters are presented along with expected resolutions. (orig.)

Reactive Power Pricing Model Considering the Randomness of Wind Power Output

Science.gov (United States)

Dai, Zhong; Wu, Zhou

2018-01-01

With the increase of wind power capacity integrated into grid, the influence of the randomness of wind power output on the reactive power distribution of grid is gradually highlighted. Meanwhile, the power market reform puts forward higher requirements for reasonable pricing of reactive power service. Based on it, the article combined the optimal power flow model considering wind power randomness with integrated cost allocation method to price reactive power. Meanwhile, considering the advantages and disadvantages of the present cost allocation method and marginal cost pricing, an integrated cost allocation method based on optimal power flow tracing is proposed. The model realized the optimal power flow distribution of reactive power with the minimal integrated cost and wind power integration, under the premise of guaranteeing the balance of reactive power pricing. Finally, through the analysis of multi-scenario calculation examples and the stochastic simulation of wind power outputs, the article compared the results of the model pricing and the marginal cost pricing, which proved that the model is accurate and effective.

Engineering a "Contact Zone" through Translanguaging

Science.gov (United States)

Helm, Francesca; Dabre, Tejane

2018-01-01

This paper presents a pilot project which uses a translanguaging approach in order to subvert the power dynamics whereby language learners, refugees and migrants are positioned as defective or ineffective communicators of a target language. The project seeks to create a space, an engineered "contact zone" in which the negative,…

Financing Solar Thermal Power Plants

International Nuclear Information System (INIS)

Price, Henry W.; Kistner, Rainer

1999-01-01

The commercialization of concentrating solar power technology took a major step forward in the mid 1980s and early 1990s with the development of the SEGS plants in California. Over the years they have proven that parabolic trough power technologies are the most cost-effective approach for commercial scale solar power generation in the sunbelt countries of the world. However, the question must be asked why no additional solar power plants have been build following the bankruptcy of the developer of the SEGS projects, LUZ International Limited. Although many believe the SEGS projects were a success as a result of parabolic trough technology they employ, in truth, the SEGS projects were developed simply because they represented an attractive opportunity for investors. Simply stated, no additional projects have been developed because no one has been able to put together a similarly attractive financial package to potential investors. More than $1.2 billion in private capital was raised in debt and equity financing for the nine SEGS plants. Investors and bankers who make these investments are the real clients for solar power technologies. They are not interested in annual solar to electric efficiencies, but in risk, return on investments, and coverage ratios. This paper will take a look at solar power projects from the financier's perspective. The challenge in moving forward is to attract private investors, commercial lenders, and international development agencies and to find innovative solutions to the difficult issues that investment in the global power market poses for solar power technologies

Financing solar thermal power plants

International Nuclear Information System (INIS)

Kistner, R.; Price, H.

1999-01-01

The commercialization of concentrating solar power technology took a major step forward in the mid 1980s and early 1990s with the development of the SEGS plants in California. Over the years they have proven that parabolic trough power technologies are the most cost-effective approach for commercial scale solar power generation in the sunbelt countries of the world. However, the question must be asked why no additional solar power plants have been built following the bankruptcy of the developer of the SEGS projects, LUZ International Limited. Although many believe the SEGS projects were a success as a result of parabolic trough technology they employ, in truth, the SEGS projects were developed simply because they represented an attractive opportunity for investors. Simply states, no additional projects have been developed because no one has been able to put together a similarly attractive financial package to potential investors. More than $1.2 billion in private capital was raised in debt and equity financing for the nine SEGS plants. Investors and bankers who make these investments are the real clients for solar power technologies. They are not interested in annual solar to electric efficiencies, but in risk, return on investments, and coverage ratios. This paper will take a look at solar power projects form the financier's perspective. The challenge in moving forward is to attract private investors, commercial lenders, and international development agencies and to find innovative solutions to the difficult issues that investment in the global power market poses for solar power technologies

Financing Solar Thermal Power Plants

Energy Technology Data Exchange (ETDEWEB)

Kistner, Rainer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Price, Henry W. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

1999-04-14

The commercialization of concentrating solar power technology took a major step forward in the mid 1980s and early 1990s with the development of the SEGS plants in California. Over the years they have proven that parabolic trough power technologies are the most cost-effective approach for commercial scale solar power generation in the sunbelt countries of the world. However, the question must be asked why no additional solar power plants have been build following the bankruptcy of the developer of the SEGS projects, LUZ International Limited. Although many believe the SEGS projects were a success as a result of parabolic trough technology they employ, in truth, the SEGS projects were developed simply because they represented an attractive opportunity for investors. Simply stated, no additional projects have been developed because no one has been able to put together a similarly attractive financial package to potential investors. More than $1.2 billion in private capital was raised in debt and equity financing for the nine SEGS plants. Investors and bankers who make these investments are the real clients for solar power technologies. They are not interested in annual solar to electric efficiencies, but in risk, return on investments, and coverage ratios. This paper will take a look at solar power projects from the financier’s perspective. The challenge in moving forward is to attract private investors, commercial lenders, and international development agencies and to find innovative solutions to the difficult issues that investment in the global power market poses for solar power technologies.

The economic analysis of power market architectures: application to real-time market design; L' analyse economique des architectures de marche electrique: application au market design du temps reel

Energy Technology Data Exchange (ETDEWEB)

Saguan, M

2007-04-15

This work contributes to the economic analysis of power market architectures. A modular framework is used to separate problems of market design in different modules. The work's goal is to study real-time market design. A two-stage market equilibrium model is used to analyse the two main real-time designs: the 'market' and the 'mechanism' (with penalty). Numerical simulations show that design applied in real-time is not neutral vis-a-vis of energy markets sequence and the competition dynamic. Designs using penalty (mechanisms) cause distortions, inefficiencies and can create barriers to entry. The size of distortions is given by the temporal position of the gate that closure the forward markets. This model has also allowed us to show the key role of real-time integration between zones and the importance of good harmonization between real-time designs of each zone. (author)

GEODESIC RECONSTRUCTION, SADDLE ZONES & HIERARCHICAL SEGMENTATION

Directory of Open Access Journals (Sweden)

Serge Beucher

2011-05-01

Full Text Available The morphological reconstruction based on geodesic operators, is a powerful tool in mathematical morphology. The general definition of this reconstruction supposes the use of a marker function f which is not necessarily related to the function g to be built. However, this paper deals with operations where the marker function is defined from given characteristic regions of the initial function f, as it is the case, for instance, for the extrema (maxima or minima but also for the saddle zones. Firstly, we show that the intuitive definition of a saddle zone is not easy to handle, especially when digitised images are involved. However, some of these saddle zones (regional ones also called overflow zones can be defined, this definition providing a simple algorithm to extract them. The second part of the paper is devoted to the use of these overflow zones as markers in image reconstruction. This reconstruction provides a new function which exhibits a new hierarchy of extrema. This hierarchy is equivalent to the hierarchy produced by the so-called waterfall algorithm. We explain why the waterfall algorithm can be achieved by performing a watershed transform of the function reconstructed by its initial watershed lines. Finally, some examples of use of this hierarchical segmentation are described.

Overview of the Compact Muon Solenoid Phase 1 Forward Pixel Upgrade

CERN Document Server

Gonzalez, Irving

2016-01-01

During Run II of the LHC, the instantaneous luminosity will increase to near 2.5×1034cm−2 s −1 . This increase in luminosity will create a high-pileup environment with a large charged particle flux near the interaction point. Operating in such challenging conditions requires high-efficiency tracking and vertexing in order to maintain the physics performance of Run I. The Phase 1 Pixel Upgrade will meet these challenges by incorporating new digital readout chips and front-end electronics for higher data rates, DC-DC powering, and dual-phase CO2 cooling, which will achieve performance exceeding that of the present detector with a lower material budget. The upgraded detector will be installed during the extended technical stop between 2016 and 2017, and it will increase the number of barrel layers from 3 to 4 and the number of forward disks from 2 to 3. The design of the new forward detector will be presented along with status of system tests, module assembly, and module qualification.

Another Lesson from Plants: The Forward Osmosis-Based Actuator

Science.gov (United States)

Sinibaldi, Edoardo; Argiolas, Alfredo; Puleo, Gian Luigi; Mazzolai, Barbara

2014-01-01

Osmotic actuation is a ubiquitous plant-inspired actuation strategy that has a very low power consumption but is capable of generating effective movements in a wide variety of environmental conditions. In light of these features, we aimed to develop a novel, low-power-consumption actuator that is capable of generating suitable forces during a characteristic actuation time on the order of a few minutes. Based on the analysis of plant movements and on osmotic actuation modeling, we designed and fabricated a forward osmosis-based actuator with a typical size of 10 mm and a characteristic time of 2–5 minutes. To the best of our knowledge, this is the fastest osmotic actuator developed so far. Moreover, the achieved timescale can be compared to that of a typical plant cell, thanks to the integrated strategy that we pursued by concurrently addressing and solving design and material issues, as paradigmatically explained by the bioinspired approach. Our osmotic actuator produces forces above 20 N, while containing the power consumption (on the order of 1 mW). Furthermore, based on the agreement between model predictions and experimental observations, we also discuss the actuator performance (including power consumption, maximum force, energy density and thermodynamic efficiency) in relation to existing actuation technologies. In light of the achievements of the present study, the proposed osmotic actuator holds potential for effective exploitation in bioinspired robotics systems. PMID:25020043

Another lesson from plants: the forward osmosis-based actuator.

Science.gov (United States)

Sinibaldi, Edoardo; Argiolas, Alfredo; Puleo, Gian Luigi; Mazzolai, Barbara

2014-01-01

Osmotic actuation is a ubiquitous plant-inspired actuation strategy that has a very low power consumption but is capable of generating effective movements in a wide variety of environmental conditions. In light of these features, we aimed to develop a novel, low-power-consumption actuator that is capable of generating suitable forces during a characteristic actuation time on the order of a few minutes. Based on the analysis of plant movements and on osmotic actuation modeling, we designed and fabricated a forward osmosis-based actuator with a typical size of 10 mm and a characteristic time of 2-5 minutes. To the best of our knowledge, this is the fastest osmotic actuator developed so far. Moreover, the achieved timescale can be compared to that of a typical plant cell, thanks to the integrated strategy that we pursued by concurrently addressing and solving design and material issues, as paradigmatically explained by the bioinspired approach. Our osmotic actuator produces forces above 20 N, while containing the power consumption (on the order of 1 mW). Furthermore, based on the agreement between model predictions and experimental observations, we also discuss the actuator performance (including power consumption, maximum force, energy density and thermodynamic efficiency) in relation to existing actuation technologies. In light of the achievements of the present study, the proposed osmotic actuator holds potential for effective exploitation in bioinspired robotics systems.

Another lesson from plants: the forward osmosis-based actuator.

Directory of Open Access Journals (Sweden)

Edoardo Sinibaldi

Full Text Available Osmotic actuation is a ubiquitous plant-inspired actuation strategy that has a very low power consumption but is capable of generating effective movements in a wide variety of environmental conditions. In light of these features, we aimed to develop a novel, low-power-consumption actuator that is capable of generating suitable forces during a characteristic actuation time on the order of a few minutes. Based on the analysis of plant movements and on osmotic actuation modeling, we designed and fabricated a forward osmosis-based actuator with a typical size of 10 mm and a characteristic time of 2-5 minutes. To the best of our knowledge, this is the fastest osmotic actuator developed so far. Moreover, the achieved timescale can be compared to that of a typical plant cell, thanks to the integrated strategy that we pursued by concurrently addressing and solving design and material issues, as paradigmatically explained by the bioinspired approach. Our osmotic actuator produces forces above 20 N, while containing the power consumption (on the order of 1 mW. Furthermore, based on the agreement between model predictions and experimental observations, we also discuss the actuator performance (including power consumption, maximum force, energy density and thermodynamic efficiency in relation to existing actuation technologies. In light of the achievements of the present study, the proposed osmotic actuator holds potential for effective exploitation in bioinspired robotics systems.

Feasibility studies for the Forward Spectrometer

International Nuclear Information System (INIS)

Biernat, Jacek

2015-01-01

The Forward Spectrometer designed for the P-barANDA detector will consist of many different detector systems allowing for precise track reconstruction and particle identification. Feasibility studies for Forward Spectrometer done by means of specific reactions will be presented. In the first part of the paper, results of simulations focussing on rate estimates of the tracking stations based on straw tubes will be presented. Next, the importance of the Forward Tracker will be demonstrated through the reconstruction of the ψ(4040) → DD-bar decay. Finally, results from the analysis of the experimental data collected with a straw tube prototype designed and constructed at the Research Center in Juelich will be discussed. (paper)

Development of gravity theory application in the internalregional inter-zone commodity movement distribution with the origin zone movement generation boundary

Science.gov (United States)

Akbardin, J.; Parikesit, D.; Riyanto, B.; TMulyono, A.

2018-05-01

Zones that produce land fishery commodity and its yields have characteristics that is limited in distribution capability because infrastructure conditions availability. High demand for fishery commodities caused to a growing distribution at inefficient distribution distance. The development of the gravity theory with the limitation of movement generation from the production zone can increase the interaction inter-zones by distribution distances effectively and efficiently with shorter movement distribution distances. Regression analysis method with multiple variable of transportation infrastructure condition based on service level and quantitative capacity is determined to estimate the 'mass' of movement generation that is formed. The resulting movement distribution (Tid) model has the equation Tid = 27.04 -0.49 tid. Based on barrier function of power model with calibration value β = 0.0496. In the way of development of the movement generation 'mass' boundary at production zone will shorten the distribution distance effectively with shorter distribution distances. Shorter distribution distances will increase the accessibility inter-zones to interact according to the magnitude of the movement generation 'mass'.

LHC Forward Physics

CERN Document Server

Akiba, K.

2016-10-17

The goal of this report is to give a comprehensive overview of the rich field of forward physics, with a special attention to the topics that can be studied at the LHC. The report starts presenting a selection of the Monte Carlo simulation tools currently available, chapter 2, then enters the rich phenomenology of QCD at low, chapter 3, and high, chapter 4, momentum transfer, while the unique scattering conditions of central exclusive production are analyzed in chapter 5. The last two experimental topics, Cosmic Ray and Heavy Ion physics are presented in the chapter 6 and 7 respectively. Chapter 8 is dedicated to the BFKL dynamics, multiparton interactions, and saturation. The report ends with an overview of the forward detectors at LHC. Each chapter is correlated with a comprehensive bibliography, attempting to provide to the interested reader with a wide opportunity for further studies.

LHC forward physics

Energy Technology Data Exchange (ETDEWEB)

Cartiglia, N. [SLAC National Accelerator Laboratory (SLAC), Menlo Park, CA (United States); Royon, C. [SLAC National Accelerator Laboratory (SLAC), Menlo Park, CA (United States). et al.

2015-10-02

The goal of this report is to give a comprehensive overview of the rich field of forward physics, with a special attention to the topics that can be studied at the LHC. The report starts presenting a selection of the Monte Carlo simulation tools currently available, chapter 2, then enters the rich phenomenology of QCD at low, chapter 3, and high, chapter 4, momentum transfer, while the unique scattering conditions of central exclusive production are analyzed in chapter 5. The last two experimental topics, Cosmic Ray and Heavy Ion physics are presented in the chapter 6 and 7 respectively. Chapter 8 is dedicated to the BFKL dynamics, multiparton interactions, and saturation. The report ends with an overview of the forward detectors at LHC. Each chapter is correlated with a comprehensive bibliography, attempting to provide to the interested reader with a wide opportunity for further studies.

Transient nature of cooperation by pay-it-forward reciprocity.

Science.gov (United States)

Horita, Yutaka; Takezawa, Masanori; Kinjo, Takuji; Nakawake, Yo; Masuda, Naoki

2016-01-20

Humans often forward kindness received from others to strangers, a phenomenon called the upstream or pay-it-forward indirect reciprocity. Some field observations and laboratory experiments found evidence of pay-it-forward reciprocity in which chains of cooperative acts persist in social dilemma situations. Theoretically, however, cooperation based on pay-it-forward reciprocity is not sustainable. We carried out laboratory experiments of a pay-it-forward indirect reciprocity game (i.e., chained gift-giving game) on a large scale in terms of group size and time. We found that cooperation consistent with pay-it-forward reciprocity occurred only in a first few decisions per participant and that cooperation originated from inherent pro-sociality of individuals. In contrast, the same groups of participants showed persisting chains of cooperation in a different indirect reciprocity game in which participants earned reputation by cooperating. Our experimental results suggest that pay-it-forward reciprocity is transient and disappears when a person makes decisions repeatedly, whereas the reputation-based reciprocity is stable in the same situation.

Efficient Dynamic Searchable Encryption with Forward Privacy

Directory of Open Access Journals (Sweden)

Etemad Mohammad

2018-01-01

Full Text Available Searchable symmetric encryption (SSE enables a client to perform searches over its outsourced encrypted files while preserving privacy of the files and queries. Dynamic schemes, where files can be added or removed, leak more information than static schemes. For dynamic schemes, forward privacy requires that a newly added file cannot be linked to previous searches. We present a new dynamic SSE scheme that achieves forward privacy by replacing the keys revealed to the server on each search. Our scheme is efficient and parallelizable and outperforms the best previous schemes providing forward privacy, and achieves competitive performance with dynamic schemes without forward privacy. We provide a full security proof in the random oracle model. In our experiments on the Wikipedia archive of about four million pages, the server takes one second to perform a search with 100,000 results.

Using electricity options to hedge against financial risks of power producers

DEFF Research Database (Denmark)

Pineda Morente, Salvador; Conejo, Antonio J.

2013-01-01

or unexpected unit failures faced by power producers. A multi-stage stochastic model is described in this tutorial paper to determine the optimal forward and option contracting decisions for a risk-averse power producer. The key features of electricity options to reduce both price and availability risks......As a consequence of competition in electricity markets, a wide variety of financial derivatives have emerged to allow market agents to hedge against risks. Electricity options and forward contracts constitute adequate instruments to manage the financial risks pertaining to price volatility...

ZOOPLANKTON COMMUNITY STRUCTURE OF THE SEA SURFACE MICROLAYER NEAR NUCLEAR POWER PLANTS AND MARINE FISH CULTURE ZONES IN DAYA BAY

Institute of Scientific and Technical Information of China (English)

杨宇峰; 王肇鼎; 潘明祥; 焦念志

2002-01-01

The authors' surveys in May-June 1999 (two cruises) at six sampling stations near nuclear power plants (NPP) and marine fish culture zones in Daya Bay, Guangdong, revealed species composition, densities and body-size of thesea surface microlayer (SM) zooplankton (>35 μm). Results showed that protozoans and copepod nauplii were the predominant components, accounting for 65.40% to95.56% of total zooplankton in abundance. The size-frequency distributions showed that the frequency of micro-zooplankton (0.02-0.2 mm) reached 0.8235. The SM zooplankton community structure revealed in the present study was quite different from that revealed by investigations in the 1980s in Daya Bay. Difference of sampling method has important influence on the obtained zooplankton community structure. SM zooplankton consisted of micro- and mesozooplankton (0.2-2.0 mm), with micro-zooplankton being predominant. Some possible cause-effect relations between the zooplankton community structure and mariculture, nuclear power plants cooling systems and sampling method are discussed.``

Optimal Joint Expected Delay Forwarding in Delay Tolerant Networks

OpenAIRE

Jia Xu; Xin Feng; Wen Jun Yang; Ru Chuan Wang; Bing Qing Han

2013-01-01

Multicopy forwarding schemes have been employed in delay tolerant network (DTN) to improve the delivery delay and delivery rate. Much effort has been focused on reducing the routing cost while retaining high performance. This paper aims to provide an optimal joint expected delay forwarding (OJEDF) protocol which minimizes the expected delay while satisfying a certain constant on the number of forwardings per message. We propose a comprehensive forwarding metric called joint expected delay (JE...

Hydrologic Synthesis Across the Critical Zone Observatory Network: A Step Towards Understanding the Coevolution of Critical Zone Function and Structure

Science.gov (United States)

Wlostowski, A. N.; Harman, C. J.; Molotch, N. P.

2017-12-01

generation). Storage-discharge relationships vary widely across the Network, and may be associated with inter-site differences in sub-surface architecture. Moving forward, we seek to reconcile top-down analysis results against the bottom-up understanding of critical zone structure and hydrologic function at each CZO site.

Insights upon upper crustal arhitecture of a subduction zone and its surroundings - Vrancea Zone and Focsani Basin - substantiated by geophysical studies

Science.gov (United States)

Bocin, A.; Stephenson, R.; Mocanu, V.

2007-12-01

The DACIA PLAN (Danube and Carpathian Integrated Action on Processes in the Lithosphere and Neotectonics) deep seismic reflection survey was performed in August-September 2001, with the proposed objective of obtaining new information on the deep structure of the external Carpathians nappes and the architecture of Tertiary/Quaternary basin developed within and adjacent to the Vrancea zone, including the rapidly subsiding Focsani Basin. The DACIA-PLAN profile is about 140 km long, having a roughly NW-SE direction, from near the southeast Transylvanian Basin, across the mountainous southeastern Carpathians and their foreland to near the Danube River. A high resolution 2.5D velocity model of the upper crust along the seismic profile has been determined from a tomographic inversion and a 2D ray tracing forward modelling of the DACIA PLAN first arrival data. Peculiar shallow high velocities indicate that pre-Tertiary basement in the Vrancea Zone (characterised by velocities greater than 5.6 km/s) is involved in Carpathian thrusting while rapid alternance, vertically or horizontally, of velocity together with narrowingly contemporary crustal events suggests uplifting. Further to the east, at the foreland basin-thrust belt transition zone (well defined within velocity values), the velocity model suggests a nose of the Miocene Subcarpathians nappe being underlain by Focsani Basin units. A Miocene and younger Focsani Basin sedimentary succession of ~10 km thickness is ascertained by a gradual increase of velocities and strongly defined velocity boundaries.

Dynamics of the solar transition zone

Science.gov (United States)

Bruner, E. C., Jr.

1978-01-01

Time-resolved profiles of the 1548-A C IV line arising from the solar transition region are analyzed in order to determine whether the 300-sec oscillations characteristic of the photosphere and chromosphere penetrate into the transition zone and to measure the rms amplitude of transition-zone disturbances as well as their dependence on solar activity. The rms velocity amplitude is used to set limits on the mechanical energy flux available for solar heating. A power-spectrum analysis indicates that acoustic waves appear to have been detected in the transition zone, that at least one case of a strong 200- to 300-sec oscillation was observed, but that strong periodicities are not found on the average in either the intensity or the velocity field. It is suggested that the rms velocity that may be attributed to directly observable wave motion is between 3 and 7 km/s, depending on whether the individual emission elements seen in rocket spectra are coherent or independent in phase.

Vce-based methods for temperature estimation of high power IGBT modules during power cycling - A comparison

DEFF Research Database (Denmark)

Amoiridis, Anastasios; Anurag, Anup; Ghimire, Pramod

2015-01-01

. This experimental work evaluates the validity and accuracy of two Vce based methods applied on high power IGBT modules during power cycling tests. The first method estimates the chip temperature when low sense current is applied and the second method when normal load current is present. Finally, a correction factor......Temperature estimation is of great importance for performance and reliability of IGBT power modules in converter operation as well as in active power cycling tests. It is common to be estimated through Thermo-Sensitive Electrical Parameters such as the forward voltage drop (Vce) of the chip...

Integrated power electronic converters and digital control

CERN Document Server

Emadi, Ali; Nie, Zhong

2009-01-01

Non-isolated DC-DC ConvertersBuck ConverterBoost ConverterBuck-Boost ConverterIsolated DC-DC ConvertersFlyback ConverterForward ConverterPush-Pull ConverterFull-Bridge ConverterHalf-Bridge ConverterPower Factor CorrectionConcept of PFCGeneral Classification of PFC CircuitsHigh Switching Frequency Topologies for PFCApplication of PFC in Advanced Motor DrivesIntegrated Switched-Mode Power ConvertersSwitched-Mode Power SuppliesThe Concept of Integrated ConverterDefinition of Integrated Switched-Mode Power Supplies (ISMPS)Boost-Type Integrated TopologiesGeneral Structure of Boost-Type Integrated T

A Method of Dynamic Extended Reactive Power Optimization in Distribution Network Containing Photovoltaic-Storage System

Science.gov (United States)

Wang, Wu; Huang, Wei; Zhang, Yongjun

2018-03-01

The grid-integration of Photovoltaic-Storage System brings some undefined factors to the network. In order to make full use of the adjusting ability of Photovoltaic-Storage System (PSS), this paper puts forward a reactive power optimization model, which are used to construct the objective function based on power loss and the device adjusting cost, including energy storage adjusting cost. By using Cataclysmic Genetic Algorithm to solve this optimization problem, and comparing with other optimization method, the result proved that: the method of dynamic extended reactive power optimization this article puts forward, can enhance the effect of reactive power optimization, including reducing power loss and device adjusting cost, meanwhile, it gives consideration to the safety of voltage.

Forward-Looking Search Within Innovation Projects

DEFF Research Database (Denmark)

Jissink, Tymen; Rohrbeck, René; Schweitzer, Fiona

To develop highly-innovative projects, which are fraught with uncertainty and longer development times, one cannot solely rely on initial planning and budgeting to ensure the project’s outcome remains novel. This study posits that to develop innovative projects, project teams need to engage...... in forward-looking search during development to ensure the project’s outcome remains novel and relevant. We refer to forward-looking search as the search and evaluation of information on markets, customers, and technologies in terms of their future impact. Data on 159 unique innovation projects from...... the Danish manufacturing industry shows that forward-looking search significantly impacts innovativeness. The effect follows an inverted-U shape where the greatest positive effect on innovativeness occurs in moderately planned projects and significantly lower effects in low- and highly planned projects...

Forward modeling. Route to electromagnetic inversion

Energy Technology Data Exchange (ETDEWEB)

Groom, R; Walker, P [PetRos EiKon Incorporated, Ontario (Canada)

1996-05-01

Inversion of electromagnetic data is a topical subject in the literature, and much time has been devoted to understanding the convergence properties of various inverse methods. The relative lack of success of electromagnetic inversion techniques is partly attributable to the difficulties in the kernel forward modeling software. These difficulties come in two broad classes: (1) Completeness and robustness, and (2) convergence, execution time and model simplicity. If such problems exist in the forward modeling kernel, it was demonstrated that inversion can fail to generate reasonable results. It was suggested that classical inversion techniques, which are based on minimizing a norm of the error between data and the simulated data, will only be successful when these difficulties in forward modeling kernels are properly dealt with. 4 refs., 5 figs.

Forecasting power plant effects on the coastal zone. EG and G final report number B-4441

International Nuclear Information System (INIS)

1976-06-01

Field methods, data analyses, and calculation are presented exemplifying procedures for oceanic dispersion prediction as a tool for forecasting power plant effects on the coastal zone. Measurements were made of dye, drogues and temperatures near Pilgrim Station's discharge (Plymouth, Massachusetts), and of currents and other variables across Massachusetts Bay. Analysis of current data illustrates separation of tidal, wind-driven and inertial constituents and their significance for dispersion. Dye and temperature dispersion are compared with the currents study, and diffusion coefficients estimated. Current data from coastal sites (New Jersey and Massachusetts) are analyzed to determine field requirements for dispersion estimates. Methods to calculate expected precision of estimates based on brief current records are developed. Model calculations predicting dispersion based on observed ocean currents are described. Formulae are derived to estimate the spatial distribution of impact from a discharge. A numerical model to calculate discharge dispersion in more detail is discussed and used to study time variations of discharge effects. Model predictions are compared with field observations

Development of nuclear power standards and relevant system in China

International Nuclear Information System (INIS)

Cao Shudong

2008-01-01

By analyzing the history of nuclear power development and the status of nuclear power codes and standards in China, the significance and necessity to quicken the development of nuclear power standards system in China are pointed out, and the guiding ideology, development thoughts, working doctrine and development objectives are put forward in this paper. (authors)

Predicting the emissive power of hydrocarbon pool fires

International Nuclear Information System (INIS)

Munoz, Miguel; Planas, Eulalia; Ferrero, Fabio; Casal, Joaquim

2007-01-01

The emissive power (E) of a flame depends on the size of the fire and the type of fuel. In fact, it changes significantly over the flame surface: the zones of luminous flame have high emittance, while those covered by smoke have low E values. The emissive power of each zone (that is, the luminous or clear flame and the non-luminous or smoky flame) and the portion of total flame area they occupy must be assessed when a two-zone model is used. In this study, data obtained from an experimental set-up were used to estimate the emissive power of fires and its behaviour as a function of pool size. The experiments were performed using gasoline and diesel oil as fuel. Five concentric circular pools (1.5, 3, 4, 5 and 6 m in diameter) were used. Appropriate instruments were employed to determine the main features of the fires. By superimposing IR and VHS images it was possible to accurately identify the luminous and non-luminous zones of the fire. Mathematical expressions were obtained that give a more accurate prediction of E lum , E soot and the average emissive power of a fire as a function of its luminous and smoky zones. These expressions can be used in a two-zone model to obtain a better prediction of the thermal radiation. The value of the radiative fraction was determined from the thermal flux measured with radiometers. An expression is also proposed for estimating the radiative fraction

The Biomantle-Critical Zone Model

Science.gov (United States)

Johnson, D. L.; Lin, H.

2006-12-01

three agents. Earth's biomantle is where most biota live, reproduce, metabolize, use and expend energy, generate heat and waste, and/or where their remains accumulate upon death. The biomantle is the epidermis of soil and dominantly a product of bioturbation and organic accumulations, impacted by subordinate processes (leaching, eluviation, illuviation, rainwash, throughflow, mass transfer, weathering, biochemical transformations, etc.). Biomantles are either one layered, those without basal stonelayers, or two layered, those with basal stonelayers, depending on presence or absence of gravels and the style of bioturbation. Earth's critical zone integrates the studies of water with soil, biota, air, and rock in the terrestrial surface and near surface environment. Its upper limit is the tops of trees and its lower is the base of the aquifer. Water is the plasma that drives Earth's environmental systems and circulates through the critical zone. The critical zone encompasses the soil, which acts as a geomembrane through which water and solutes, energy, gases, solids, and living organisms biodynamically exchange with the atmosphere, biosphere, hydrosphere, and lithosphere, thus creating a life sustaining environment. Soil also functions as a central link in hydrologic and biogeochemical cycles. The biomantle-critical zone approach provides an appealing way forward in pedology, soil geomorphology, soil ecology, soil science, and near surface geophysical studies. It fosters fresh process and results understandings, and offers Earth science practitioners an array of new interpretive options.

Minimax robust power split in AF relays based on uncertain long-term CSI

KAUST Repository

Nisar, Muhammad Danish; Alouini, Mohamed-Slim

2011-01-01

An optimal power control among source and relay nodes in presence of channel state information (CSI) is vital for an efficient amplify and forward (AF) based cooperative communication system. In this work, we study the optimal power split (power

Laser-induced forward transfer of hybrid carbon nanostructures

International Nuclear Information System (INIS)

Palla-Papavlu, A.; Filipescu, M.; Vizireanu, S.; Vogt, L.; Antohe, S.; Dinescu, M.; Wokaun, A.; Lippert, T.

2016-01-01

Highlights: • Rapid prototyping of carbon nanowalls (CNW) and functionalized CNWs is described. • CNW and CNW:SnO_2 pixels are successfully printed by laser-induced forward transfer. • Flexible (polyimide) and rigid (glass) supports are used as substrates. • 4 μm thick CNW and CNW:SnO_2 pixels maintain their morphology and structure after LIFT. - Abstract: Chemically functionalized carbon nanowalls (CNWs) are promising materials for a wide range of applications, i.e. gas sensors, membranes for fuel cells, or as supports for catalysts. However, the difficulty of manipulation of these materials hinders their integration into devices. In this manuscript a procedure for rapid prototyping of CNWs and functionalized CNWs (i.e. decorated with SnO_2 nanoparticles) is described. This procedure enables the use of laser-induced forward transfer (LIFT) as a powerful technique for printing CNWs and CNW:SnO_2 pixels onto rigid and flexible substrates. A morphological study shows that for a large range of laser fluences i.e. 500–700 mJ/cm"2 it is possible to transfer thick (4 μm) CNW and CNW:SnO_2 pixels. Micro-Raman investigation of the transferred pixels reveals that the chemical composition of the CNWs and functionalized CNWs does not change as a result of the laser transfer. Following these results one can envision that CNWs and CNW:SnO_2 pixels obtained by LIFT can be ultimately applied in technological applications.

A comment on 'Storage and the electricity forward premium'

International Nuclear Information System (INIS)

Bloys van Treslong, Adriaan; Huisman, Ronald

2010-01-01

This paper examines the robustness of the results found by Douglas and Popova (2008). They examine the electricity forward premium in relation to gas storage inventories and find that, although electricity is not directly storable, electricity forward premiums are lower when gas storage inventories are higher, especially on days with high temperatures. Douglas and Popova (2008) derive their results from a forward premium model that is an extension of the Bessembinder and Lemmon (2002) model. We examine whether the gas storage inventory results hold under a different specification of the forward risk premium. Our results support the results found by Douglas and Popova (2008) and show that their results are not influenced by the specification of the forward premium model. (author)

The study of sheath flow dark zone phenomenon in dynamic individual cells scattering measurement

Science.gov (United States)

Zhang, Lu; Zhao, Hong; Wang, Xiaopin; Zhang, Weiguang

2008-09-01

Dynamic cells scattering is one of the most efficient approaches exploring in measurements of cells size, morphology and growth states. This technique can be widely applied in real-time detection for pharmaceutical industry, food industry, liquor industry and other biological fields. A novel method named dynamic individual cells scattering measurement is designed in this paper, which can make cells pass through quartz glass measurement zone one by one with sheath flow driving force. During the experiments, an obvious phenomenon has been found which is called sheath flow dark zone phenomenon (SFDZ). Under the influence of SFDZ, sheath flow forming detection becomes very difficult. In this paper, the causes giving rise to SFDZ have been analyzed. And an improved method is put forward, in which the orifice inside the measurement zone is set as an optical system. Then the illuminating system is redesigned. In this way, almost all the illuminating light can enter orifice so that the total reflection energy decreases substantially. A comparison experiments have been done, which proves the efficiency of this redesigned optical system and its sound effects on SFDZ avoiding.

Conservatism in SRS Criticality Alarm System 12 Rad Zone Calculations - How Much is Enough?

International Nuclear Information System (INIS)

Yates, K.R.

2002-01-01

Savannah River Site (SRS) uses two methods (i.e., Approximate Method and MCNP) of calculating the 12-rad zone. The reasons for the two-tier approach are described in Ref. 1 and 2. Lately, there have been occasions in which the use of either the Approximate Method (AM) or MCNP3 calculations indicated potential facility impacts. For example, one or both methods may indicate that a 12-rad zone extends outside of relatively thick shielding, or extends to the roof of a facility, or extends through shielding to part of a stairwell. In such cases, a criticality alarm system may have to be installed to protect workers in a small, localized area from a potential dose that is not substantially greater than 12 rad in air. But, is the potential dose really greater than 12 rad in air? A subcommittee was appointed to look into the two 12-rad zone calculation methods for the purpose of identifying items contributing to over-conservatism and under-conservatism, and to recommend a path forward

Status of the Forward Physics Projects in ATLAS

OpenAIRE

Ask, Stefan

2007-01-01

The ATLAS experiment at the LHC is building several detector systems for forward physics studies and to determine the luminosity. The main forward systems consist of a Cerenkov detector called LUCID, a Zero Degree Calorimeter (ZDC) and Roman Pots which will house a scintillating fiber tracker system called ALFA. Here we report some of the forward physics activities that are foreseen in ATLAS together with the status of the related detector systems.

Synchronisation of two separate zones in a standalone microgrid

Directory of Open Access Journals (Sweden)

Ying-Yi Hong

2017-06-01

Full Text Available Standalone microgrids that comprise distributed generation sources (DGSs or energy storage systems (ESSs exist on off-shore islands or remote areas. When a fault occurs in a standalone microgrid, the microgrid is separated into several zones with pre-specified DGS or ESS supplying power to local loads. After the fault is cleared, the three-phase voltages and frequencies may differ among these zones. To restore the original microgrid topology, these zones must be reconnected to each other by synchronisation. A synchronisation controller of the DGS/ESS that accounts for slightly different three-phase voltages and frequencies in two separate zones is presented. The Clark transform and Mamdani fuzzy rules are used to implement the controller, providing fast and seamless synchronisation. Simulation results using a standalone microgrid show the practical applicability of the proposed method.

Energy Zones Study: A Comprehensive Web-Based Mapping Tool to Identify and Analyze Clean Energy Zones in the Eastern Interconnection

Energy Technology Data Exchange (ETDEWEB)

Koritarov, V.; Kuiper, J.; Hlava, K.; Orr, A.; Rollins, K.; Brunner, D.; Green, H.; Makar, J.; Ayers, A.; Holm, M.; Simunich, K.; Wang, J.; Augustine, C.; Heimiller, D.; Hurlbut, D. J.; Milbrandt, A.; Schneider, T. R.; et al.

2013-09-01

This report describes the work conducted in support of the Eastern Interconnection States’ Planning Council (EISPC) Energy Zones Study and the development of the Energy Zones Mapping Tool performed by a team of experts from three National Laboratories. The multi-laboratory effort was led by Argonne National Laboratory (Argonne), in collaboration with the National Renewable Energy Laboratory (NREL) and Oak Ridge National Laboratory (ORNL). In June 2009, the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory published Funding Opportunity Announcement FOA-0000068, which invited applications for interconnection-level analysis and planning. In December 2009, the Eastern Interconnection Planning Collaborative (EIPC) and the EISPC were selected as two award recipients for the Eastern Interconnection. Subsequently, in 2010, DOE issued Research Call RC-BM-2010 to DOE’s Federal Laboratories to provide research support and assistance to FOA-0000068 awardees on a variety of key subjects. Argonne was selected as the lead laboratory to provide support to EISPC in developing a methodology and a mapping tool for identifying potential clean energy zones in the Eastern Interconnection. In developing the EISPC Energy Zones Mapping Tool (EZ Mapping Tool), Argonne, NREL, and ORNL closely collaborated with the EISPC Energy Zones Work Group which coordinated the work on the Energy Zones Study. The main product of the Energy Zones Study is the EZ Mapping Tool, which is a web-based decision support system that allows users to locate areas with high suitability for clean power generation in the U.S. portion of the Eastern Interconnection. The mapping tool includes 9 clean (low- or no-carbon) energy resource categories and 29 types of clean energy technologies. The EZ Mapping Tool contains an extensive geographic information system database and allows the user to apply a flexible modeling approach for the identification and analysis of potential energy zones

Positron emission zone plate holography for particle tracking

Energy Technology Data Exchange (ETDEWEB)

Gundogdu, O. [University of Birmingham, School of Physics and Astronomy, Birmingham B15 2TT (United Kingdom)]. E-mail: o.gundogdu@surrey.ac.uk

2006-01-15

Positron Emission Particle Tracking (PEPT) is a powerful non-invasive technique that has been used extensively for tracking a single particle. In this paper, we present a study of zone plate holography method in order to track multiple particles, mainly two particles. The main aim is to use as small number of events as possible in the order to make it possible to track particles in fast moving industrial systems. A zone plate with 100% focal efficiency is simulated and applied to the Positron Emission Tomography (PET) data for multiple particle tracking. A simple trajectory code was employed to explore the effects of the nature of the experimental trajectories. A computer holographic reconstruction code that simulates optical reconstruction was developed. The different aspects of the particle location, particle activity ratios for enabling tagging of particles and zone plate and hologram locations are investigated. The effect of the shot noise is investigated and the limitations of the zone plate holography are reported.

Positron emission zone plate holography for particle tracking

International Nuclear Information System (INIS)

Gundogdu, O.

2006-01-01

Positron Emission Particle Tracking (PEPT) is a powerful non-invasive technique that has been used extensively for tracking a single particle. In this paper, we present a study of zone plate holography method in order to track multiple particles, mainly two particles. The main aim is to use as small number of events as possible in the order to make it possible to track particles in fast moving industrial systems. A zone plate with 100% focal efficiency is simulated and applied to the Positron Emission Tomography (PET) data for multiple particle tracking. A simple trajectory code was employed to explore the effects of the nature of the experimental trajectories. A computer holographic reconstruction code that simulates optical reconstruction was developed. The different aspects of the particle location, particle activity ratios for enabling tagging of particles and zone plate and hologram locations are investigated. The effect of the shot noise is investigated and the limitations of the zone plate holography are reported

Variance-in-Mean Effects of the Long Forward-Rate Slope

DEFF Research Database (Denmark)

Christiansen, Charlotte

2005-01-01

This paper contains an empirical analysis of the dependence of the long forward-rate slope on the long-rate variance. The long forward-rate slope and the long rate are described by a bivariate GARCH-in-mean model. In accordance with theory, a negative long-rate variance-in-mean effect for the long...... forward-rate slope is documented. Thus, the greater the long-rate variance, the steeper the long forward-rate curve slopes downward (the long forward-rate slope is negative). The variance-in-mean effect is both statistically and economically significant....

On the Performance of a Wireless Powered Communication System Using a Helping Relay

Directory of Open Access Journals (Sweden)

T. N. Nguyen

2017-09-01

Full Text Available This paper studies the outage performance and system throughput of a bidirectional wireless information and power transfer system with a helping relay. The relay helps forward wireless power from the access point (AP to the user, and also the information from the user to the AP in the reverse direction. We assume that the relay uses time switching based energy harvesting protocol. The analytical results provide theoretical insights into the effect of various system parameters, such as time switching factor, source transmission rate, transmitting-power-to-noise ratio to system performance for both amplify-and-forward and decode-and-forward relaying protocols. The optimal time switching ratio is determined in each case to maximize the information throughput from the user to the AP subject to the energy harvesting and consumption balance constraints at both the relay and the user. All of the above analyses are confirmed by Monte-Carlo simulation.

Profiling the regional wind power fluctuation in China

International Nuclear Information System (INIS)

Yu Dayang; Liang Jun; Han Xueshan; Zhao Jianguo

2011-01-01

As China starts to build 6 10-GW wind zones in 5 provinces by 2020, accommodating the wind electricity generated from these large wind zones will be a great challenge for the regional grids. Inadequate wind observing data hinders profiling the wind power fluctuations at the regional grid level. This paper proposed a method to assess the seasonal and diurnal wind power patterns based on the wind speed data from the NASA GEOS-5 DAS system, which provides data to the study of climate processes including the long-term estimates of meteorological quantities. The wind power fluctuations for the 6 largest wind zones in China are presented with both the capacity factor and the megawatt wind power output. The measured hourly wind output in a regional grid is compared to the calculating result to test the analyzing model. To investigate the offsetting effect of dispersed wind farms over large regions, the regional correlations of hourly wind power fluctuations are calculated. The result illustrates the different offsetting effects of minute and hourly fluctuations.

A Preemptive Link State Spanning Tree Source Routing Scheme for Opportunistic Data Forwarding in MANET

OpenAIRE

R. Poonkuzhali; M. Y. Sanavullah; A. Sabari

2014-01-01

Opportunistic Data Forwarding (ODF) has drawn much attention in mobile adhoc networking research in recent years. The effectiveness of ODF in MANET depends on a suitable routing protocol which provides a powerful source routing services. PLSR is featured by source routing, loop free and small routing overhead. The update messages in PLSR are integrated into a tree structure and no need to time stamp routing updates which reduces the routing overhead.

The public opinion on emergency preparedness close to nuclear power plants

International Nuclear Information System (INIS)

Hultaaker, Oe.

1984-07-01

More than 1500 people have been interviewed on their attitudes towards and their knowledge of emergency actions on nuclear accidents at nuclear power plants. Of the people addressed, 768 lived in the inner zones close to the power plants. 775 were farmers near the four nuclear power sites in Sweden. The farmers lived both in inner zones and zones further away. A majority consider themselves not well-informed on health risks after a nuclear accident. More than a third would want more information on what to do in case of accident. Farmers outside the inner zones are more dissatisfied with the information status than other groups. Farmers from the inner zones consider the information given inadequate regarding risks to their health and also health risks for their live stock. The results of interviews are in some cases compared with the information given to the public. (Aa)

Threshold and maximum power evolution of stimulated Brillouin scattering and Rayleigh backscattering in a single mode fiber segment

International Nuclear Information System (INIS)

Sanchez-Lara, R; Alvarez-Chavez, J A; Mendez-Martinez, F; De la Cruz-May, L; Perez-Sanchez, G G

2015-01-01

The behavior of stimulated Brillouin scattering (SBS) and Rayleigh backscattering phenomena, which limit the forward transmission power in modern, ultra-long haul optical communication systems such as dense wavelength division multiplexing systems is analyzed via simulation and experimental investigation of threshold and maximum power. Evolution of SBS, Rayleigh scattering and forward powers are experimentally investigated with a 25 km segment of single mode fiber. Also, a simple algorithm to predict the generation of SBS is proposed where two criteria of power thresholds was used for comparison with experimental data. (paper)

Coordination of Nordic system operators in the electric power market - profit from improved capacity utilization and a more flexible division into price zones

International Nuclear Information System (INIS)

Bjoerndal, Mette; Joernsten, Kurt

2001-08-01

This report evaluates the possible profits of establishing a common system operator function in the Nordic electric power market. The main focus is placed on how to deal with congestion in the transmission grid. To estimate possible profits from a better utilization of the resources in the Nordic grid, the authors have analyzed socio-economic profits for several load scenarios. A simplified model of the Nordic stock area was used in the calculations. The existence of two methods of dealing with congestion in the grid may lead to reduced capacity utilization and to greater price differences than necessary. The examples show that ''indirect'' congestion control may be very expensive and that considerable cost reduction can be achieved by improved exploitation of congestion. This implies that if the Nordic area is divided into price zones, it is advantageous to regard the grid as an entity independent of national borders and system operators and to let the real transmission limitations determine the price zoning

Substation Reactive Power Regulation Strategy

Science.gov (United States)

Zhang, Junfeng; Zhang, Chunwang; Ma, Daqing

2018-01-01

With the increasing requirements on the power supply quality and reliability of distribution network, voltage and reactive power regulation of substations has become one of the indispensable ways to ensure voltage quality and reactive power balance and to improve the economy and reliability of distribution network. Therefore, it is a general concern of the current power workers and operators that what kind of flexible and effective control method should be used to adjust the on-load tap-changer (OLTC) transformer and shunt compensation capacitor in a substation to achieve reactive power balance in situ, improve voltage pass rate, increase power factor and reduce active power loss. In this paper, based on the traditional nine-zone diagram and combining with the characteristics of substation, a fuzzy variable-center nine-zone diagram control method is proposed and used to make a comprehensive regulation of substation voltage and reactive power. Through the calculation and simulation of the example, this method is proved to have satisfactorily reconciled the contradiction between reactive power and voltage in real-time control and achieved the basic goal of real-time control of the substation, providing a reference value to the practical application of the substation real-time control method.

Analysis of Liquid Zone Control Valve Oscillation Problem in CANDU Reactors

Directory of Open Access Journals (Sweden)

Elnara Nasimi

2013-01-01

Full Text Available This paper looks at the existing challenges with steady-state Liquid Zone control at some CANDU (CANada Deuterium Uranium stations, where—contrary to expectations for equilibrium flow—Liquid Zone Control Valve oscillations have proven to be a chronic, unanticipated challenge. Currently, the exact causes of this behaviour are not fully understood, although it is confirmed that the Control Valve oscillations are not due to automatic power adjustment requests or zone level changes due to process leaks. This phenomenon was analysed based on a case study of one domestic nuclear power station to determine whether it could be attributed to inherent controller properties. Next, a proposal is made in an attempt to improve current performance with minimal changes to the existing system hardware and logic using conventional technologies. Finally, a proposal was made to consider Model Predictive Control-based technology to minimize the undesirable Control Valve oscillations at steady state based on the obtained simulation results and discussion of other available alternatives.

Proposal for a forward spectrometer at the 4π detector

International Nuclear Information System (INIS)

Berdermann, E.; Luehning, J.; Lynen, U.; Milkau, U.; Mueller, K.; Sann, H.; Stelzer, H.; Trautmann, W.; Kreutz, P.; Kuehmichel, A.; Pinkenburg, C.; Pochodzalla, J.; Moretto, L.; Mueller, W.F.J.; Wozniak, G.; Imme, G.; Raciti, G.; Adloff, G.C.; Bilwes, B.; Bilwes, R.; Michel, M.; Masse, C.; Rudolf, G.; Scheibling, F.; Stuttge, L.

1988-03-01

We propose to complement the 4π detector to be installed at the SIS-ESR facility with a forward spectrometer (ALADiN) capable of detecting and identifying nuclear fragments up to the largest masses and momenta expected at SIS. Positioned behind the time-of-flight wall of the 4π detector the spectrometer should subtend an angular range of approximately ±5 0 in horizontal and at least ±2 0 in vertical direction and thus cover a sufficiently large part of the forward region. In order to satisfy these requirements and to obtain the necessary resolution in mass and momentum the dipole magnet needs, at least, a gap height of 0.5 m, a horizontal acceptance of 1.5 m and a bending power of 2 Tm. The following sections of this proposal start out with a more detailed presentation of the physics motivation which will concentrate on multifragmentation as a new and hitherto unexplored decay mode of nuclear matter under extreme conditions. The description of the spectrometer divides into three sections containing the description of the magnet and the vacuum system, of the detectors needed to track and to identify the fragments, and of the performance of the spectrometer. (orig./HSI)

Forward and backward inference in spatial cognition.

Directory of Open Access Journals (Sweden)

Will D Penny

Full Text Available This paper shows that the various computations underlying spatial cognition can be implemented using statistical inference in a single probabilistic model. Inference is implemented using a common set of 'lower-level' computations involving forward and backward inference over time. For example, to estimate where you are in a known environment, forward inference is used to optimally combine location estimates from path integration with those from sensory input. To decide which way to turn to reach a goal, forward inference is used to compute the likelihood of reaching that goal under each option. To work out which environment you are in, forward inference is used to compute the likelihood of sensory observations under the different hypotheses. For reaching sensory goals that require a chaining together of decisions, forward inference can be used to compute a state trajectory that will lead to that goal, and backward inference to refine the route and estimate control signals that produce the required trajectory. We propose that these computations are reflected in recent findings of pattern replay in the mammalian brain. Specifically, that theta sequences reflect decision making, theta flickering reflects model selection, and remote replay reflects route and motor planning. We also propose a mapping of the above computational processes onto lateral and medial entorhinal cortex and hippocampus.

Modelling and control of three-phase grid-connected power supply with small DC-link capacitor for electrolysers

DEFF Research Database (Denmark)

Török, Lajos; Máthé, Lászlo; Nielsen, Carsten Karup

2016-01-01

These days electrolyzers are becoming more and more interesting due to the high demand for energy storage in form of hydrogen for renewable power generation using fuel cells. The design of a power supply for such a system is complex especially when the DC-link capacitance is reduced....... By substituting the complex switching model of the power supply with a simplified one, the system dynamics can be better observed. The resonances caused by the small DC link capacitor and grid side inductance can be easier analyzed. A feed forward compensation method is proposed based on the simplified model......-forward compensation signal is created, canceling in such a way the resonance introduced by the grid inductance and the DC-link capacitor from the feed-forward loop. The theoretical work has been validated through experiments on a 5 kW DC power supply used for electrolyser application....

AS Migration and Optimization of the Power Integrated Data Network

Science.gov (United States)

Zhou, Junjie; Ke, Yue

2018-03-01

In the transformation process of data integration network, the impact on the business has always been the most important reference factor to measure the quality of network transformation. With the importance of the data network carrying business, we must put forward specific design proposals during the transformation, and conduct a large number of demonstration and practice to ensure that the transformation program meets the requirements of the enterprise data network. This paper mainly demonstrates the scheme of over-migrating point-to-point access equipment in the reconstruction project of power data comprehensive network to migrate the BGP autonomous domain to the specified domain defined in the industrial standard, and to smooth the intranet OSPF protocol Migration into ISIS agreement. Through the optimization design, eventually making electric power data network performance was improved on traffic forwarding, traffic forwarding path optimized, extensibility, get larger, lower risk of potential loop, the network stability was improved, and operational cost savings, etc.

Integrated Solid Oxide Fuel Cell Power System Characteristics Prediction

Directory of Open Access Journals (Sweden)

Marian GAICEANU

2009-07-01

Full Text Available The main objective of this paper is to deduce the specific characteristics of the CHP 100kWe Solid Oxide Fuel Cell (SOFC Power System from the steady state experimental data. From the experimental data, the authors have been developed and validated the steady state mathematical model. From the control room the steady state experimental data of the SOFC power conditioning are available and using the developed steady state mathematical model, the authors have been obtained the characteristic curves of the system performed by Siemens-Westinghouse Power Corporation. As a methodology the backward and forward power flow analysis has been employed. The backward power flow makes possible to obtain the SOFC power system operating point at different load levels, resulting as the load characteristic. By knowing the fuel cell output characteristic, the forward power flow analysis is used to predict the power system efficiency in different operating points, to choose the adequate control decision in order to obtain the high efficiency operation of the SOFC power system at different load levels. The CHP 100kWe power system is located at Gas Turbine Technologies Company (a Siemens Subsidiary, TurboCare brand in Turin, Italy. The work was carried out through the Energia da Ossidi Solidi (EOS Project. The SOFC stack delivers constant power permanently in order to supply the electric and thermal power both to the TurboCare Company and to the national grid.

Combined Heat & Power Using the Infinia Concentrated Solar CHP PowerDish System

Science.gov (United States)

2013-08-01

Executive Orders FOB - Forward Operating Base FPSE - Free Piston Stirling Engine GHG - Greenhouse Gas ICC - International Code Council IMA... Stirling Engine (FPSE) for military, commercial, and space applications for almost 30 years. These developments have included multiple fuel types...product for its Free Piston Stirling Engine operating on solar energy for electricity production, called the PowerDishTM, a reasonable extension for

Development of honeycomb type orifices for flow zoning in PFBR

Energy Technology Data Exchange (ETDEWEB)

Pandey, G.K., E-mail: gkpandey@igcar.gov.in; Ramdasu, D.; Padmakumar, G.; Prakash, V.; Rajan, K.K.

2013-09-15

Highlights: • Cavitation free flow zoning devices are developed for reactor core in PFBR. • These devices are experimentally investigated for their hydraulic characteristics. • Pressure drop and cavitation are two main characteristics to be investigated. • Various configurations of devices utilized in different zones are discussed. • Loss coefficient for each configuration is compared and reported. -- Abstract: The prototype fast breeder reactor (PFBR) is in its advanced phase of construction at Kalpakkam, India. It is a sodium cooled, pool type reactor with two loop concept where each loop have one primary sodium pump (PSP), one secondary sodium pump (SSP) and two intermediate heat exchangers (IHX). PFBR core subassemblies (SA) are supported vertically inside the sleeves provided in the grid plate (GP). The GP acts as a coolant header through which flow is distributed among the SA to remove fission heat. Since the power profile of the reactor core is not uniform, it is necessary to distribute the coolant flow (called flow zoning) to each subassembly according to their power levels to get maximum mean outlet temperature of sodium at core outlet. To achieve this, PFBR core is divided into 15 zones such as fuel, blanket, reflector, storage, etc. according to their respective power levels. The flow zoning in the different SAs of the reactor core is achieved by installing permanent pressure dropping devices in the foot of the subassembly. Orifices having honey-comb type geometry were developed to meet the flow zoning requirements of fuel zone. These orifices being of very complex geometry requires precision methods of manufacturing to achieve the desired shape under specified tolerances. Investment casting method was optimized to manufacture this orifice plate successfully. Hydraulics of these orifices is important in achieving the required pressure drop without cavitation. The pressure drop across these orifice geometries depends mainly on geometrical

The Forward-Bias Puzzle: A Solution Based on Covered Interest Parity

OpenAIRE

Pippenger, John

2009-01-01

The forward-bias puzzle is probably the most important puzzle in international macroeconomics. After more than 20 years, there is no accepted solution. My solution is based on covered interest parity (CIP). CIP implies: (1) Forward rates are not rational expectations of future spot rates. Those expectations depend on future spot rates and interest rate differentials. (2) The forward bias is the result of a specification error, replacing future forward exchange rates with current forward ...

Forward charge distributions associated with hadronically produced J/psi particles

International Nuclear Information System (INIS)

Budd, H.S.

1983-01-01

We have measured the forward charge as a function of x/sub F/ of the psi for events produced by 225 Gev/c π-Be interactions. The forward charge is the average difference between the number of positive hadrons and negative hadrons produced in the forward hemisphere. The standard Drell-Yan model predicts that the forward charge should become less negative as the x/sub F/ of the J/psi increases. The measured forward charge becomes more negative as the x/sub F/ of the J/psi increases although it is consistent with being flat as a function of x/sub F/. Hence the data is not consistent with any Drell-Yan type model which assumes the forward charge is not strongly dependent on the hadronic energy left over after the J/psi is formed. 45 references

Downscaling NASA Climatological Data to Produce Detailed Climate Zone Maps

Science.gov (United States)

Chandler, William S.; Hoell, James M.; Westberg, David J.; Whitlock, Charles H.; Zhang, Taiping; Stackhouse, P. W.

2011-01-01

The design of energy efficient sustainable buildings is heavily dependent on accurate long-term and near real-time local weather data. To varying degrees the current meteorological networks over the globe have been used to provide these data albeit often from sites far removed from the desired location. The national need is for access to weather and solar resource data accurate enough to use to develop preliminary building designs within a short proposal time limit, usually within 60 days. The NASA Prediction Of Worldwide Energy Resource (POWER) project was established by NASA to provide industry friendly access to globally distributed solar and meteorological data. As a result, the POWER web site (power.larc.nasa.gov) now provides global information on many renewable energy parameters and several buildings-related items but at a relatively coarse resolution. This paper describes a method of downscaling NASA atmospheric assimilation model results to higher resolution and maps those parameters to produce building climate zone maps using estimates of temperature and precipitation. The distribution of climate zones for North America with an emphasis on the Pacific Northwest for just one year shows very good correspondence to the currently defined distribution. The method has the potential to provide a consistent procedure for deriving climate zone information on a global basis that can be assessed for variability and updated more regularly.

Development of nuclear power

International Nuclear Information System (INIS)

1960-01-01

The discussion on the development of nuclear power took place on 28 September 1960 in Vienna. In his opening remarks, Director General Cole referred to the widespread opinion that 'the prospect of cheap electricity derived from nuclear energy offers the most exciting prospect for improving the lot of mankind of all of the opportunities for uses of atomic energy'. He then introduced the four speakers and the moderator of the discussion, Mr. H. de Laboulaye, IAEA Deputy Director General for Technical Operations. n the first part of the discussion the experts addressed themselves in turn to four topics put forward by the moderator. These were: the present technical status of nuclear power, the present costs of nuclear power, prospects for future reductions in the cost of nuclear power, and applications of nuclear power in less-developed areas

Robust Power Allocation for Multi-Carrier Amplify-and-Forward Relaying Systems

KAUST Repository

Rao, Anlei; Nisar, M. Danish; Alouini, Mohamed-Slim

2012-01-01

It has been shown that adaptive power allocation can provide a substantial performance gain in wireless communication systems when perfect channel state information (CSI) is available at the transmitter. However when only imperfect CSI is available

Effects of radionuclide contamination on forest trees in the exclusion zone around the Fukushima Daiichi Nuclear Power Plant

International Nuclear Information System (INIS)

Watanabe, Yoshito; Kubota, Yoshihisa; Fuma, Shoichi; Yoshida, Satoshi; Ichikawa, San'ei; Kubota, Masahide; Takano, Toshiyuki; Mizoguchi, Masahiko

2012-01-01

A preliminary survey was performed for forest areas within the exclusion zone around the Fukushima Daiichi Nuclear Power Plant, for radionuclide contamination levels and radiation effects on trees during the first year after the March 2011 accident. Even in the most contaminated forest, approximately 3 km west of the power plant, no externally visible symptoms of radiation damage—including yellowing, malformation, and early withering of leaves—were observed in trees, indicating that massive radiation damage did not occur in the surrounding forests after the accident. Radiosensitive coniferous plants were, however, heavily contaminated by the deposition of radionuclides in reproductive organs such as cones, which could cause the exposure of developing seeds. The level of radionuclides in the cones of Japanese cedar trees changed, depending on the contamination level of the forest, which was approximately given by an ambient dose rate. The dose rate of internal exposure in the cones of the most contaminated forest, which was calculated to include exposure from the radionuclides deposited in the organs, was found to be within the criteria dose rate of 4-40 μGy/h selected for pine trees by the ICRP in Publication 108. This raises the necessity of performing more detailed analyses of the cytogenetic and reproductive damage to forest trees in the area. (author)

Effects of radionuclide contamination on forest trees in the exclusion zone around the Fukushima Daiichi Nuclear Power Plant

International Nuclear Information System (INIS)

Watanabe, Yoshito; Kubota, Yoshihisa; Fuma, Shoichi; Yoshida, Satoshi; Ichikawa, San'ei; Kubota, Masahide; Takano, Toshiyuki; Mizoguchi, Masahiko

2013-01-01

A preliminary survey was performed for forest areas within the exclusion zone around the Fukushima Daiichi Nuclear Power Plant, for radionuclide contamination levels and radiation effects on trees during the first year after the March 2011 accident. Even in the most contaminated forest, approximately 3 km west of the power plant, no externally visible symptoms of radiation damage—including yellowing, malformation, and early withering of leaves—were observed in trees, indicating that massive radiation damage did not occur in the surrounding forests after the accident. Radiosensitive coniferous plants were, however, heavily contaminated by the deposition of radionuclides in reproductive organs such as cones, which could cause the exposure of developing seeds. The level of radionuclides in the cones of Japanese cedar trees changed, depending on the contamination level of the forest, which was approximately given by an ambient dose rate. The dose rate of internal exposure in the cones of the most contaminated forest, which was calculated to include exposure from the radionuclides deposited in the organs, was found to be within the criteria dose rate of 4-40 μGy/h selected for pine trees by the ICRP in Publication 108. This raises the necessity of performing more detailed analyses of the cytogenetic and reproductive damage to forest trees in the area. (author)

Zone separator for multiple zone vessels

Science.gov (United States)

Jones, John B.

1983-02-01

A solids-gas contact vessel, having two vertically disposed distinct reaction zones, includes a dynamic seal passing solids from an upper to a lower zone and maintaining a gas seal against the transfer of the separate treating gases from one zone to the other, and including a stream of sealing fluid at the seal.

Project designing of Temelin nuclear power plant

International Nuclear Information System (INIS)

Krychtalek, Z.; Linek, V.

1989-01-01

The geological and seismic parameters are listed of the Temelin nuclear power plant. The division of the site in building zones is described. The main zones consist of the power generation unit zone with the related auxiliary buildings of hot plants and of the auxiliary buildings of the nonactive part with industrial buildings. The important buildings are interconnected with communication and technology bridges. Cooling towers and spray pools and the entrance area are part of the urbanistic design. The architectonic design of the buildings uses standard building elements and materials. The design of the buildings is based on the requirements on their function and on structural load and on the demands of maximal utilization of the type of the reinforced concrete prefab structure system. The structure is made of concrete or steel cells. The project design is based on Soviet projects. The layout is shown of the main power generation units and a section is presented of a 1,000 MW unit. (J.B.). 2 figs

Load levelling measures being tackled by shikoku Electric Power Co. Inc.; Shikoku Denryoku Kabushi Kaisha no fuka heijunka eno torikumi

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

For the electric power companies, the activity of pushing forward the load levelling contributes greatly to the curtailment of cost by means of effective formation and utilization of facilities. It is planned to take up more positive activities with a target of 3% improvement in the load factor in ten years. Concrete measures for further promotion of load levelling are the diversity of the rate menu of appraising the load levelling effort of the customers and the promotion of the spread of equipment and systems relating to load levelling such as electric water heating apparatuses and thermal energy storage air conditioning systems. The rate system has been reviewed taking the opportunity of rate revision made in January, 1996. Particularly, further load shift to midnight time zone is expected as a result of better rate incentive for customers which is brought about by large reduction of the rate level due to the cost reduction effect accompanying the improvement in atomic power generation ratio. Outlines are given on the fields relating to general households, business, dwellings, buildings, and industry. 3 figs., 1 tab.

The metabolic power and energetic demands of elite Gaelic football match play.

Science.gov (United States)

Malone, Shane; Solan, Barry; Collins, Kieran; Doran, Dominic

2017-05-01

Metabolic power has not yet been investigated within elite Gaelic football. The aim of the current investigation was to compare the metabolic power demands between positional groups and examine the temporal profile of elite Gaelic football match play. Global positional satellite system (GPS) data were collected from 50 elite Gaelic football players from 4 inter-county teams during 35 elite competitive matches over a three season period. A total of 351 complete match samples were obtained for final analysis. Players were categorized based on positional groups; full-back, half-back, midfield, half-forward and full-forward. Instantaneous raw velocity data was obtained from the GPS and exported to a customized spreadsheet which provided estimations of both speed based, derived metabolic power and energy expenditure variables (total distance, high speed distance, average metabolic power, high power distance and total energy expenditure). Match mean distance was 9222±1588 m, reflective of an average metabolic power of 9.5-12.5 W·kg-1, with an average energy expenditure of 58-70 Kj·kg-1 depending on position. There were significant differences between positional groups for both speed-based and metabolic power indices. Midfielders covered more total and high-speed distance, as well as greater average and overall energy expenditure compared to other positions (Ppower distance, as well as average metabolic power throughout the match (Ppower and traditional running based variables. The middle three positions (midfield, half-back and half-forward) possess greater activity profiles when compared to other positional groups. The reduction in metabolic power and traditional running based variables are comparable across match play. The current study demonstrates that metabolic power may contribute to our understanding of Gaelic football match-play.

Laser-induced forward transfer of hybrid carbon nanostructures

Energy Technology Data Exchange (ETDEWEB)

Palla-Papavlu, A. [Paul Scherrer Institut, General Energy Research Department, 5232 Villigen-PSI (Switzerland); National Institute for Lasers, Plasma, and Radiation Physics, Lasers Department, Atomistilor 409, 077125 Magurele (Romania); University of Bucharest, Faculty of Physics, 405 Atomistilor Street, 077125 Magurele (Romania); Filipescu, M., E-mail: mihaela.filipescu@inflpr.ro [Paul Scherrer Institut, General Energy Research Department, 5232 Villigen-PSI (Switzerland); National Institute for Lasers, Plasma, and Radiation Physics, Lasers Department, Atomistilor 409, 077125 Magurele (Romania); Vizireanu, S. [National Institute for Lasers, Plasma, and Radiation Physics, Lasers Department, Atomistilor 409, 077125 Magurele (Romania); Vogt, L. [Paul Scherrer Institut, General Energy Research Department, 5232 Villigen-PSI (Switzerland); Antohe, S. [University of Bucharest, Faculty of Physics, 405 Atomistilor Street, 077125 Magurele (Romania); Academy of Romanian Scientists, Splaiul Independentei 54, 050094 Bucharest (Romania); Dinescu, M. [National Institute for Lasers, Plasma, and Radiation Physics, Lasers Department, Atomistilor 409, 077125 Magurele (Romania); Wokaun, A.; Lippert, T. [Paul Scherrer Institut, General Energy Research Department, 5232 Villigen-PSI (Switzerland)

2016-06-30

Highlights: • Rapid prototyping of carbon nanowalls (CNW) and functionalized CNWs is described. • CNW and CNW:SnO{sub 2} pixels are successfully printed by laser-induced forward transfer. • Flexible (polyimide) and rigid (glass) supports are used as substrates. • 4 μm thick CNW and CNW:SnO{sub 2} pixels maintain their morphology and structure after LIFT. - Abstract: Chemically functionalized carbon nanowalls (CNWs) are promising materials for a wide range of applications, i.e. gas sensors, membranes for fuel cells, or as supports for catalysts. However, the difficulty of manipulation of these materials hinders their integration into devices. In this manuscript a procedure for rapid prototyping of CNWs and functionalized CNWs (i.e. decorated with SnO{sub 2} nanoparticles) is described. This procedure enables the use of laser-induced forward transfer (LIFT) as a powerful technique for printing CNWs and CNW:SnO{sub 2} pixels onto rigid and flexible substrates. A morphological study shows that for a large range of laser fluences i.e. 500–700 mJ/cm{sup 2} it is possible to transfer thick (4 μm) CNW and CNW:SnO{sub 2} pixels. Micro-Raman investigation of the transferred pixels reveals that the chemical composition of the CNWs and functionalized CNWs does not change as a result of the laser transfer. Following these results one can envision that CNWs and CNW:SnO{sub 2} pixels obtained by LIFT can be ultimately applied in technological applications.

Solution of equation for imaginary part of forward scattering amplitude for theories with lambdaphisup(n) interaction

International Nuclear Information System (INIS)

Arbuzov, B.A.; D'yakonov, V.Yu.; Rochev, V.E.

1975-01-01

Solution of equations for imaginary part of forward scattering amplitude in ladder approximation for theories with lambdaphisup(n),n(>=)4 interaction have been obtained. Two types of diagrams have been considered for lambdaphisup(n) renormalizable theory. It is shown, that the leading singularity is the branch point, which gives the power asymptotics with accuracy up to logarithms. The unrenormalizable theory with n(>=)5 lead to exponentially rising asymptotics

Jogging forward, thinking back

OpenAIRE

Raboteau, Albert Jordy, III

2009-01-01

Kristina Anderson was an avid jogger before she was wounded in Norris Hall on April 16, 2007. She needed rehabilitation to walk again, much less to run. But she is jogging regularly again now, moving forward with her life without forgetting.

Power Hardware In The Loop Validation of Fault Ride Through of VSC HVDC Connected Offshore Wind Power Plants

DEFF Research Database (Denmark)

Sharma, Ranjan; Wu, Qiuwei; Cha, Seung-Tae

2014-01-01

This paper presents the power hardware in the loop (PHIL) validation of a feed forward DC voltage control scheme for the fault ride through (FTR) of voltage source converter (VSC) high voltage DC (HVDC) connected offshore wind power plants (WPPs). In the proposed FRT scheme, the WPP collector...... network AC voltage is actively controlled by considering both the DC voltage error and the AC current from the WPP AC collector system which ensures fast and robust FRT of the VSC HVDC connected offshore WPPs. The PHIL tests were carried out in order to verify the efficacy of the proposed feed forward DC...... voltage control scheme for enhancing the FRT capability of the VSC HVDC connected WPPs. The PHIL test results have demonstrated the proper control coordination between the offshore WPP and the WPP side VSC and the efficient FRT of the VSC HVDC connected WPPs....

Pollution concentration estimates in ecologically important zones

Energy Technology Data Exchange (ETDEWEB)

Skiba, Y.N. [Mexico City Univ. (Mexico). Center for Atmospheric Sciences

1995-12-31

Method based on using the pollutant transport equation and the adjoint technique is described here for estimating the pollutant concentration level in ecologically important zones. The method directly relates the pollution level in such zones with the power of the pollution sources and the initial pollution field. Assuming that the wind or current velocities are known (from climatic data or dynamic model), the main and adjoint pollutant transport equations can be considered in a limited area to solve such theoretically and practically important problems as: (1) optimal location of new industries in a given region with the aim to minimize the pollution concentration in certain ecologically important zones, (2) optimization of emissions from operating industries, (3) detection of the plants violating sanitary regulations, (4) analysis of the emissions coming from the vehicle traffic (such emissions can be included in the model by means of the linear pollution sources located along the main roadways), (5) estimation of the oil pollution in various ecologically important oceanic (sea) zones in case of accident with the oil tanker, (6) evaluation of the sea water desalination level in estuary regions, and others. These equations considered in a spherical shell domain can also be applied to the problems of transporting the pollutants from a huge industrial complex, or from the zone of an ecological catastrophe similar to the Chernobyl one

Pollution concentration estimates in ecologically important zones

Energy Technology Data Exchange (ETDEWEB)

Skiba, Y N [Mexico City Univ. (Mexico). Center for Atmospheric Sciences

1996-12-31

Method based on using the pollutant transport equation and the adjoint technique is described here for estimating the pollutant concentration level in ecologically important zones. The method directly relates the pollution level in such zones with the power of the pollution sources and the initial pollution field. Assuming that the wind or current velocities are known (from climatic data or dynamic model), the main and adjoint pollutant transport equations can be considered in a limited area to solve such theoretically and practically important problems as: (1) optimal location of new industries in a given region with the aim to minimize the pollution concentration in certain ecologically important zones, (2) optimization of emissions from operating industries, (3) detection of the plants violating sanitary regulations, (4) analysis of the emissions coming from the vehicle traffic (such emissions can be included in the model by means of the linear pollution sources located along the main roadways), (5) estimation of the oil pollution in various ecologically important oceanic (sea) zones in case of accident with the oil tanker, (6) evaluation of the sea water desalination level in estuary regions, and others. These equations considered in a spherical shell domain can also be applied to the problems of transporting the pollutants from a huge industrial complex, or from the zone of an ecological catastrophe similar to the Chernobyl one

47 CFR 51.513 - Proxies for forward-looking economic cost.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Proxies for forward-looking economic cost. 51... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.513 Proxies for forward-looking economic cost... a cost study that complies with the forward-looking economic cost based pricing methodology...

Feed-Forward Control in Resonant DC Link Inverter

OpenAIRE

Apinan Aurasopon; Worawat Sa-ngiavibool

2008-01-01

This paper proposes a feed-forward control in resonant dc link inverter. The feed-forward control configuration is based on synchronous sigma-delta modulation. The simulation results showing the proposed technique can reject non-ideal dc bus improving the total harmonic distortion.

Analysis on energy-saving path of rural buildings in hot summer and cold winter zone

Science.gov (United States)

Huang, Mingqiang; Li, Jinheng

2018-02-01

Since the reform and opening policy, the construction of rural area in China has become more and more important. The idea of establishing green villages needs to be accepted and recognized by the public. The hot summer and cold winter zone combines two contradictory weather conditions that is cold winter and hot summer. So the living conditions are limited. In response to this climate, residents extensively use electric heaters or air conditioning to adjust the indoor temperature, resulting in energy waste and environmental pollution. In order to improve the living conditions of residents, rural area energy conservation has been put on the agenda. Based on the present situation and energy consumption analysis of the rural buildings in the hot summer and cold winter zone, this article puts forward several energy saving paths from government, construction technology and so on

Qinshan Phase III (CANDU) nuclear power project quality assurance

International Nuclear Information System (INIS)

Wang Lingen; Du Jinxiang

2001-01-01

The completion and implementation of quality assurance system of Qinshan Phase III (CANDU) nuclear power project are presented. Some comments and understanding with consideration of the project characteristics are put forward

The landscape basis of the complex monitoring of 30-km zone of NPP

International Nuclear Information System (INIS)

Malisheva, L.L.; Romanchuk, S.P.; Schur, U.V.; Rybalko, S.I.; Proskura, N.I.; Lury, D.I.

1992-01-01

This publication reviews works on the problem of creation the landscape basis of complex monitoring in 30 km zone of NPP(nuclear power plants). The objectives, subject and designation of monitoring system are considered. The monitoring network and organization of systematical observations are justified. The structure of radiation monitoring in NPP 30 km zone is considered in details. (author)

The investigation of the Japanese black cattle as well as their rearing environment inside the 'difficult-to-return zone' due to Fukushima nuclear power plant disaster

International Nuclear Information System (INIS)

Okada, K.

2016-01-01

We are continuously investigating the effect of persistent exposure to low level radiation on Japanese Black cattle kept on 3 ranches as well as their rearing environment inside the 'difficult-to-return zone' due to Fukushima nuclear power plant disaster. The spatial radiation dose rate at 1 m above ground was 40 μSv/h in the spring of 2013 but it decreased to about 20 μSv/h after 1 year 7 months. Accumulated spatial radiation dose throughout the year of was 220 mSv and exposure dose of cattle throughout that year was 170 mSv. The effect of radiation exposure due to the nuclear power plant disaster has not been clearly recognized in cattle. (author)

Experimental study of the kinetics of dry, forward combustion. Final report

Energy Technology Data Exchange (ETDEWEB)

Thomas, G.W.; Buthod, A.P.; Allag, O.

1979-02-01

Results are presented of an experimental investigation of dry, forward combustion with two main objectives, viz, (1) to develop a method for determining the kinetic perameters of fuel laydown and burnoff from combustion tube data, and (2) to evaluate them for a particular crude-sand mixture. In the light of past experimental work, a two-step chain reaction model is postulated in which fuel laydown and burnoff are considered as competitive kinetic reactions. Laboratory equipment consisting of a combustion tube assembly and sampling probe, a flow control system, an electronic control assembly, and a fluid analysis system are described in detail. The sampling probe provides a novel method for taking fluid samples at selected interior points within the combustion cell. Six experimental runs were performed using a 27/sup 0/ API Prudhoe Bay crude. Analyses of the data indicte that, in addition to the coke residue, some light ends of the crude enter into the total fuel consumed by the burning zone. The use of the moveable sampling probe permitted the reconstruction of CO + CO/sub 2/ production rate curves as functions of time and distance. A technique is presented for solving the integral equation and estimating the activation energies, pre-exponential factors, and some associated constants for fuel deposition and combustion. It was found that operating pressure has essentially no effect on the exponential energy, but it does affect the preexponential (or frequency) factor. It is concluded that the essential phenomena of forward combustion can be adequately depicted by the two-step chain reaction concept, and that kinetic data,or their bounds, can be determined from combustion tube data.

Trade secrets protection mode of nuclear power plant

International Nuclear Information System (INIS)

Zeng Bin

2015-01-01

The paper analyzes the legal environment in which nuclear power enterprises are stayed, and mainly discusses the business secret protection modes of China's nuclear power enterprises. It is expected to provide a revelation and help for these enterprises to protect their business secrets. Firstly, the paper briefly expounds the legal basis of business secret protection and China's legalization status in this regard. Then it mainly puts forward the business secret management framework and postulations for nuclear power enterprises, and key points in application and protection of nuclear power business secret. (author)

Emergency planning zone reduction

International Nuclear Information System (INIS)

Edwards, C.

2002-01-01

This paper describes the process used by a large industrial Department of Energy (DOE) site to communicate changing hazards to its stakeholders and install the confidence necessary to implement the resulting emergency planning changes. Over the last decade as the sites missions have shifted from full-scale production to a greater emphasis on environmental restoration and waste management, the off-site threat from its operations has substantially decreased. The challenge was to clearly communicate the reduced hazards, install confidence in the technical analysis that documented the hazard reduction, and obtain stakeholder buy-in on the path forward to change the emergency management program. The most significant change to the emergency management program was the proposed reduction of the sites Emergency Planning Zone (EPZ). As the EPZ is defined as an area for which planning is needed to protect the public in the event of an accident, the process became politically challenging. An overview of how the site initially approached this problem and then learned to more substantially involve the state and local emergency preparedness agencies and the local Citizens Advisory Board will be presented. (author)

Development and design of photovoltaic power prediction system

Science.gov (United States)

Wang, Zhijia; Zhou, Hai; Cheng, Xu

2018-02-01

In order to reduce the impact of power grid safety caused by volatility and randomness of the energy produced in photovoltaic power plants, this paper puts forward a construction scheme on photovoltaic power generation prediction system, introducing the technical requirements, system configuration and function of each module, and discussing the main technical features of the platform software development. The scheme has been applied in many PV power plants in the northwest of China. It shows that the system can produce reasonable prediction results, providing a right guidance for dispatching and efficient running for PV power plant.

FACTORS OF LOGISTICS AND FORWARDING SERVICE FORMATION AND DEVELOPMENT

Directory of Open Access Journals (Sweden)

Galina Kucheruk

2016-06-01

Full Text Available Purpose: Forwarding service is a key part of the system of goods movement and as such it provides realization of numerous services. Providing of new additional and unconventional services to cargo owners by haulers will extend the range of their clients, increase profits from sales, facilitate and accelerate the introduction of new transport technologies, increase stability and strength of relations in the transport market. Methods: We formulated requirements to be met by modern forwarding service. Carriage management should be based on logistics concept and its methods; comprehensive resource optimization of haulers and owners of cargo and other supply chain participants (insurance, financial ones, etc.. Optimization of the space-time chain, even involving freight forwarders (transport intermediaries, is a complex scientific and practical task. Results: We offer directions for development of forwarding additional and non-conventional service for forwarding system of cargo haulage service, which would also provide an opportunity to reduce transport time and increase service level. Discussion: A general scheme of products delivery to consumers contains a significant number of units-particular entities. It is important to analyze not only the position of economic entities in the market, but the features and capabilities of their interaction in major systemic tasks of forwarding service, quality and effective promotion of freight flows

Parapapillary atrophy: histological gamma zone and delta zone.

Directory of Open Access Journals (Sweden)

Jost B Jonas

Full Text Available BACKGROUND: To examine histomorphometrically the parapapillary region in human eyes. METHODOLOGY/PRINCIPAL FINDINGS: The histomorphometric study included 65 human globes (axial length:21-37 mm. On anterior-posterior histological sections, we measured the distance Bruch's membrane end (BME-optic nerve margin ("Gamma zone", BME-retinal pigment epithelium (RPE ("Beta zone", BME-beginning of non-occluded choriocapillaris, and BME-beginning of photoreceptor layer. "Delta zone" was defined as part of gamma zone in which blood vessels of at least 50 µm diameter were not present over a length of >300 µm. Beta zone (mean length:0.35±0.52 mm was significantly (P = 0.01 larger in the glaucoma group than in the non-glaucomatous group. It was not significantly (P = 0.28 associated with axial length. Beta zone was significantly (P = 0.004 larger than the region with occluded choriocapillaris. Gamma zone (mean length:0.63±1.25 mm was associated with axial length (P50 µm diameter within gamma zone was present only in highly axially elongated globes and was not related with glaucoma. Beta zone (Bruch's membrane without RPE was correlated with glaucoma but not with globe elongation. Since the region with occluded choriocapillaris was smaller than beta zone, complete loss of RPE may have occurred before complete choriocapillaris closure.

The wind power prediction research based on mind evolutionary algorithm

Science.gov (United States)

Zhuang, Ling; Zhao, Xinjian; Ji, Tianming; Miao, Jingwen; Cui, Haina

2018-04-01

When the wind power is connected to the power grid, its characteristics of fluctuation, intermittent and randomness will affect the stability of the power system. The wind power prediction can guarantee the power quality and reduce the operating cost of power system. There were some limitations in several traditional wind power prediction methods. On the basis, the wind power prediction method based on Mind Evolutionary Algorithm (MEA) is put forward and a prediction model is provided. The experimental results demonstrate that MEA performs efficiently in term of the wind power prediction. The MEA method has broad prospect of engineering application.

Optimized Power Allocation and Relay Location Selection in Cooperative Relay Networks

Directory of Open Access Journals (Sweden)

Jianrong Bao

2017-01-01

Full Text Available An incremental selection hybrid decode-amplify forward (ISHDAF scheme for the two-hop single relay systems and a relay selection strategy based on the hybrid decode-amplify-and-forward (HDAF scheme for the multirelay systems are proposed along with an optimized power allocation for the Internet of Thing (IoT. Given total power as the constraint and outage probability as an objective function, the proposed scheme possesses good power efficiency better than the equal power allocation. By the ISHDAF scheme and HDAF relay selection strategy, an optimized power allocation for both the source and relay nodes is obtained, as well as an effective reduction of outage probability. In addition, the optimal relay location for maximizing the gain of the proposed algorithm is also investigated and designed. Simulation results show that, in both single relay and multirelay selection systems, some outage probability gains by the proposed scheme can be obtained. In the comparison of the optimized power allocation scheme with the equal power allocation one, nearly 0.1695 gains are obtained in the ISHDAF single relay network at a total power of 2 dB, and about 0.083 gains are obtained in the HDAF relay selection system with 2 relays at a total power of 2 dB.

Hierarchical Bayesian Model for Simultaneous EEG Source and Forward Model Reconstruction (SOFOMORE)

DEFF Research Database (Denmark)

Stahlhut, Carsten; Mørup, Morten; Winther, Ole

2009-01-01

In this paper we propose an approach to handle forward model uncertainty for EEG source reconstruction. A stochastic forward model is motivated by the many uncertain contributions that form the forward propagation model including the tissue conductivity distribution, the cortical surface, and ele......In this paper we propose an approach to handle forward model uncertainty for EEG source reconstruction. A stochastic forward model is motivated by the many uncertain contributions that form the forward propagation model including the tissue conductivity distribution, the cortical surface...

Brain Imaging, Forward Inference, and Theories of Reasoning

Science.gov (United States)

Heit, Evan

2015-01-01

This review focuses on the issue of how neuroimaging studies address theoretical accounts of reasoning, through the lens of the method of forward inference (Henson, 2005, 2006). After theories of deductive and inductive reasoning are briefly presented, the method of forward inference for distinguishing between psychological theories based on brain imaging evidence is critically reviewed. Brain imaging studies of reasoning, comparing deductive and inductive arguments, comparing meaningful versus non-meaningful material, investigating hemispheric localization, and comparing conditional and relational arguments, are assessed in light of the method of forward inference. Finally, conclusions are drawn with regard to future research opportunities. PMID:25620926

Brain imaging, forward inference, and theories of reasoning.

Science.gov (United States)

Heit, Evan

2014-01-01

This review focuses on the issue of how neuroimaging studies address theoretical accounts of reasoning, through the lens of the method of forward inference (Henson, 2005, 2006). After theories of deductive and inductive reasoning are briefly presented, the method of forward inference for distinguishing between psychological theories based on brain imaging evidence is critically reviewed. Brain imaging studies of reasoning, comparing deductive and inductive arguments, comparing meaningful versus non-meaningful material, investigating hemispheric localization, and comparing conditional and relational arguments, are assessed in light of the method of forward inference. Finally, conclusions are drawn with regard to future research opportunities.

Optimization Criteria of Power Transformer Operation

Directory of Open Access Journals (Sweden)

A. A. Gonchar

2006-01-01

Full Text Available It has been shown that minimum losses in active power of a power transformer do not correspond to its maximum efficiency. For a transformer being operated there are no so called «zones of its economical operation». In this case strictly specified value of active power losses corresponds to a particular current of the winding.

Effect of slash on forwarder soil compaction

Science.gov (United States)

Timothy P. McDonald; Fernando Seixas

1997-01-01

A study of the effect of slash on forwarder soil compaction was carried out. The level of soil compaction at two soil moisture contents, three slash densities (0, 10, and 20 kg/m2), and two levels of traffic (one and five passes) were measured. Results indicated that, on dry, loamy sand soils, the presence of slash did not decrease soil compaction after one forwarder...

Power Cycling Test Method for Reliability Assessment of Power Device Modules in Respect to Temperature Stress

DEFF Research Database (Denmark)

Choi, Ui-Min; Blaabjerg, Frede; Jørgensen, Søren

2018-01-01

Power cycling test is one of the important tasks to investigate the reliability performance of power device modules in respect to temperature stress. From this, it is able to predict the lifetime of a component in power converters. In this paper, representative power cycling test circuits......, measurement circuits of wear-out failure indicators as well as measurement strategies for different power cycling test circuits are discussed in order to provide the current state of knowledge of this topic by organizing and evaluating current literature. In the first section of this paper, the structure...... of a conventional power device module and its related wear-out failure mechanisms with degradation indicators are discussed. Then, representative power cycling test circuits are introduced. Furthermore, on-state collector-emitter voltage (VCE ON) and forward voltage (VF) measurement circuits for wear-out condition...

Avalanche criticality in thermal-driven martensitic transitions: the asymmetry of the forward and reverse transitions in shape-memory materials

Science.gov (United States)

Planes, Antoni; Vives, Eduard

2017-08-01

Martensitic transitions take place intermittently as a sequence of avalanches which are accompanied by the emission of acoustic waves. The study of this acoustic emission (AE) reveals the scale-free nature of the avalanches. In a number of shape memory materials undergoing a martensitic transition it has been found that, in spite of relatively low hysteresis, the dynamics of forward and reverse transitions are different, which may explain the fact that the AE activity is different in both forward and reverse transitions. The asymmetry could be a consequence of the fact that, while nucleation is required for the transition from the parent to martensitic phase to take place, reverse transition occurs by fast shrinkage of martensitic domains. We have analysed in detail the distribution of avalanches in cooling and heating runs in Fe-Pd and Cu-Zn-Al shape-memory alloys. In the former, the martensitic transition is weakly first order while it shows a significant first order character in the latter. We have found that in Fe-Pd the distributions are power law for the forward and reverse transitions characterized by the same critical exponents. For Cu-Zn-Al the distribution of avalanches is critical in forward transitions but exponentially damped in the reverse transition. It is suggested that this different behaviour could originate from the different dynamic mechanisms in forward and reverse transitions. This paper is dedicated to our friend Ekhard Salje in the occasion of his 70th birthday.

Maine Tidal Power Initiative: Environmental Impact Protocols For Tidal Power

Energy Technology Data Exchange (ETDEWEB)

Peterson, Michael Leroy [Univ. of Maine, Orono, ME; Zydlewski, Gayle Barbin [Univ. of Maine, Orono, ME; Xue, Huijie [Univ. of Maine, Orono, ME; Johnson, Teresa R. [Univ. of Maine, Orono, ME

2014-02-02

The Maine Tidal Power Initiative (MTPI), an interdisciplinary group of engineers, biologists, oceanographers, and social scientists, has been conducting research to evaluate tidal energy resources and better understand the potential effects and impacts of marine hydro-kinetic (MHK) development on the environment and local community. Project efforts include: 1) resource assessment, 2) development of initial device design parameters using scale model tests, 3) baseline environmental studies and monitoring, and 4) human and community responses. This work included in-situ measurement of the environmental and social response to the pre-commercial Turbine Generator Unit (TGU®) developed by Ocean Renewable Power Company (ORPC) as well as considering the path forward for smaller community scale projects.

Measurement of the power trasient and valve closing time, for the zone control system, during a programmed shutdown in August 1989 and its relation with the class IV partial loss event occurred on 27/12/88 in CNE (Embalse nuclear power plant)

International Nuclear Information System (INIS)

Paz, A.O. de; Moreno, C.A.; Vinez, J.C.

1990-01-01

A description is made of a number of measurements performed during the programmed shutdown on Embalse nuclear power plant (CNE) (August 1989) to validate the existance of a reactivity insertion owing to the emptying of the liquid zone control system. In the event occurred on 27/12/88 when there was a partial loss Cl IV. Once the existance of this contribution was confirmed, the pertinent corrective measures were taken and the test was repeated to verify the effectiveness of the latter. The temporal evolution of a number of neutronic variables and process variables of the liquid zone system were stored in an IBM-PC XT equipped with analog-to-digital converters, for later analysis. (Author) [es

Last fibre for the CMS's forward hadronic calorimeter

CERN Multimedia

2004-01-01

In February an important milestone was passed by the CMS's forward hadronic calorimeter project: the last of 450000 quartz fibres was inserted and the wedge preparation phase has now been completed. Ten thousand working hours were spent on inserting 450 000 quartz fibres into the CMS's forward hadronic calorimeter! Patience and meticulous attention to detail were the two qualities required by the five people who undertook this special job at CERN. On 6 February their task was completed. "The CMS's forward hadronic calorimeter (HF) covers the region immediately close to the LHC beam, 0.6 degrees to 6 degrees from the beam line," explains project coordinator Tiziano Camporesi. The detection of high energy jets in this angular region will be very important in helping to identify the signature of the Higgs boson or possibly any new boson produced in proton-proton collision in the LHC. Rita Fodor, 19, is working on one wedge of the CMS's forward hadronic calorimeter in building 186. She and her...

Factors affecting forward pricing behaviour: implications of alternative regression model specifications

Directory of Open Access Journals (Sweden)

Henry Jordaan

2010-12-01

Full Text Available Price risk associated with maize production became a reason for concern in South Africa only after the deregulation of the agricultural commodities markets in the mid-1990s, when farmers became responsible for marketing their own crops. Although farmers can use, inter alia, the cash forward contracting and/or the derivatives market to manage price risk, few farmers actually participate in forward pricing. A similar reluctance to use forward pricing methods is also found internationally. A number of different model specifications have been used in previous research to model forward pricing behaviour which is based on the assumption that the same variables influence both the adoption and the quantity decision. This study compares the results from a model specification which models forward pricing behaviour in a single-decision framework with the results from modelling the quantity decision conditional to the adoption decision in a two-step approach. The results suggest that substantially more information is obtained by modelling forward pricing behaviour as two separate decisions rather than a single decision. Such information may be valuable in educational material compiled to educate farmers in the effective use of forward pricing methods in price risk management. Modelling forward pricing behaviour as two separate decisions  is thus a more effective means of modelling forward pricing behaviour than modelling it as a single decision.

MASKED AREAS IN SHEAR PEAK STATISTICS: A FORWARD MODELING APPROACH

International Nuclear Information System (INIS)

Bard, D.; Kratochvil, J. M.; Dawson, W.

2016-01-01

The statistics of shear peaks have been shown to provide valuable cosmological information beyond the power spectrum, and will be an important constraint of models of cosmology in forthcoming astronomical surveys. Surveys include masked areas due to bright stars, bad pixels etc., which must be accounted for in producing constraints on cosmology from shear maps. We advocate a forward-modeling approach, where the impacts of masking and other survey artifacts are accounted for in the theoretical prediction of cosmological parameters, rather than correcting survey data to remove them. We use masks based on the Deep Lens Survey, and explore the impact of up to 37% of the survey area being masked on LSST and DES-scale surveys. By reconstructing maps of aperture mass the masking effect is smoothed out, resulting in up to 14% smaller statistical uncertainties compared to simply reducing the survey area by the masked area. We show that, even in the presence of large survey masks, the bias in cosmological parameter estimation produced in the forward-modeling process is ≈1%, dominated by bias caused by limited simulation volume. We also explore how this potential bias scales with survey area and evaluate how much small survey areas are impacted by the differences in cosmological structure in the data and simulated volumes, due to cosmic variance

Single-Event Effects in Silicon Carbide Power Devices

Science.gov (United States)

Lauenstein, Jean-Marie; Casey, Megan C.; LaBel, Kenneth A.; Ikpe, Stanley; Topper, Alyson D.; Wilcox, Edward P.; Kim, Hak; Phan, Anthony M.

2015-01-01

This report summarizes the NASA Electronic Parts and Packaging Program Silicon Carbide Power Device Subtask efforts in FY15. Benefits of SiC are described and example NASA Programs and Projects desiring this technology are given. The current status of the radiation tolerance of silicon carbide power devices is given and paths forward in the effort to develop heavy-ion single-event effect hardened devices indicated.

Research and Implementation of Tractor Power Shift Clutch Control System

OpenAIRE

Li Chengjun; Ke Meicong; Wu Youyu

2018-01-01

Applying power shift control technology on tractor can improve the power, economy and driving comfort of tractor. The separation and engagement control of clutch in tractor power shift transmission system is the key factor to optimize the quality of shift. Through many experiments and tests, an electronic control unit based on MC9S12 was developed, and an effective clutch control strategy was put forward, which improved the jerk of power shift and shortened the gear shift time.

The cerebro-cerebellum: Could it be loci of forward models?

Science.gov (United States)

Ishikawa, Takahiro; Tomatsu, Saeka; Izawa, Jun; Kakei, Shinji

2016-03-01

It is widely accepted that the cerebellum acquires and maintain internal models for motor control. An internal model simulates mapping between a set of causes and effects. There are two candidates of cerebellar internal models, forward models and inverse models. A forward model transforms a motor command into a prediction of the sensory consequences of a movement. In contrast, an inverse model inverts the information flow of the forward model. Despite the clearly different formulations of the two internal models, it is still controversial whether the cerebro-cerebellum, the phylogenetically newer part of the cerebellum, provides inverse models or forward models for voluntary limb movements or other higher brain functions. In this article, we review physiological and morphological evidence that suggests the existence in the cerebro-cerebellum of a forward model for limb movement. We will also discuss how the characteristic input-output organization of the cerebro-cerebellum may contribute to forward models for non-motor higher brain functions. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Datafile: [nuclear power in] Japan

International Nuclear Information System (INIS)

Anon.

1989-01-01

Japan is third after the USA and France in terms of the Western World's installed nuclear capacity, but it has by far the largest forward programme. Great effort is also being put into the fuel cycle and advanced reactors. There is close co-operation between the government, utilities and manufacturers, but Japan has not sought to export reactors. The government has responded to the growing public opposition to nuclear power with a massive increase in its budget for public relations. Details of the nuclear power programme are given. (author)

Intensity rankings of plyometric exercises using joint power absorption.

Science.gov (United States)

Van Lieshout, Kathryn G; Anderson, Joy G; Shelburne, Kevin B; Davidson, Bradley S

2014-09-01

Athletic trainers and physical therapists often progress patients through rehabilitation by selecting plyometric exercises of increasing intensity in preparation for return to sport. The purpose of this study was to quantify the intensity of seven plyometric movements commonly used in lower-extremity rehabilitation by joint-specific peak power absorption and the sum of the peak power. Ten collegiate athletes performed submaximal plyometric exercises in a single test session: vertical jump, forward jump, backward jump, box drop, box jump up, tuck jump, and depth jump. Three-dimensional kinematics and force platform data were collected to generate joint kinetics. Peak power absorption normalized to body mass was calculated at the ankle, knee, and hip, and averaged across repetitions. Joint peak power data were pooled across athletes and summed to obtain the sum of peak power. Movements were ranked from 1 (low) to 7 (high) based on the sum of peak power and joint peak power (ankle, knee, hip). The sum of peak power did not correspond with standard low, medium, and high subjective intensity ratings or joint peak power in all joints. Mixed model analyses revealed significant variance between the sum of peak power and joint peak power ranks in the forward jump, backward jump, box drop, and depth jump (P<0.05), but not in the vertical jump, box jump up, and tuck jump. Results provide intensity rankings that can be used directly by athletic trainers and physical therapists in developing protocols for rehabilitation specific to the injured joint. Copyright © 2014 Elsevier Ltd. All rights reserved.

High power diode laser remelting of metals

International Nuclear Information System (INIS)

Chmelickova, H; Tomastik, J; Ctvrtlik, R; Supik, J; Nemecek, S; Misek, M

2014-01-01

This article is focused on the laser surface remelting of the steel samples with predefined overlapping of the laser spots. The goal of our experimental work was to evaluate microstructure and hardness both in overlapped zone and single pass ones for three kinds of ferrous metals with different content of carbon, cast iron, non-alloy structural steel and tool steel. High power fibre coupled diode laser Laserline LDF 3600-100 was used with robotic guided processing head equipped by the laser beam homogenizer that creates rectangular beam shape with uniform intensity distribution. Each sample was treated with identical process parameters - laser power, beam diameter, focus position, speed of motion and 40% spot overlap. Dimensions and structures of the remelted zone, zone of the partial melting, heat affected zone and base material were detected and measured by means of laser scanning and optical microscopes. Hardness progress in the vertical axis of the overlapped zone from remelted surface layer to base material was measured and compared with the hardness of the single spots. The most hardness growth was found for cast iron, the least for structural steel. Experiment results will be used to processing parameters optimization for each tested material separately.

Analysis of Power Transfer Efficiency of Standard Integrated Circuit Immunity Test Methods

Directory of Open Access Journals (Sweden)

Hai Au Huynh

2015-01-01

Full Text Available Direct power injection (DPI and bulk current injection (BCI methods are defined in IEC 62132-3 and IEC 62132-4 as the electromagnetic immunity test method of integrated circuits (IC. The forward power measured at the RF noise generator when the IC malfunctions is used as the measure of immunity level of the IC. However, the actual power that causes failure in ICs is different from forward power measured at the noise source. Power transfer efficiency is used as a measure of power loss of the noise injection path. In this paper, the power transfer efficiencies of DPI and BCI methods are derived and validated experimentally with immunity test setup of a clock divider IC. Power transfer efficiency varies significantly over the frequency range as a function of the test method used and the IC input impedance. For the frequency range of 15 kHz to 1 GHz, power transfer efficiency of the BCI test was constantly higher than that of the DPI test. In the DPI test, power transfer efficiency is particularly low in the lower test frequency range up to 10 MHz. When performing the IC immunity tests following the standards, these characteristics of the test methods need to be considered.

Fault Identification Algorithm Based on Zone-Division Wide Area Protection System

OpenAIRE

Xiaojun Liu; Youcheng Wang; Hub Hu

2014-01-01

As the power grid becomes more magnified and complicated, wide-area protection system in the practical engineering application is more and more restricted by the communication level. Based on the concept of limitedness of wide-area protection system, the grid with complex structure is divided orderly in this paper, and fault identification and protection action are executed in each divided zone to reduce the pressure of the communication system. In protection zone, a new wide-area...

78 FR 7387 - Continuation of 2008 Farm Bill-Dairy Forward Pricing Program

Science.gov (United States)

2013-02-01

...] Continuation of 2008 Farm Bill--Dairy Forward Pricing Program AGENCY: Agricultural Marketing Service, USDA... the Dairy Forward Pricing Program contained in the Food, Conservation and Energy Act of 2008 (the 2008... associations of producers may enter into forward price contracts under the Dairy Forward Pricing Program...

Energy Management of a Hybrid-Power Gas Engine-Driven Heat Pump

Directory of Open Access Journals (Sweden)

Qingkun Meng

2015-10-01

Full Text Available The hybrid-power gas engine-driven heat pump (HPGHP combines hybrid power technology with a gas engine heat pump. The engine in the power system is capable of operating constantly with high thermal efficiency and low emissions during different operating modes. In this paper, the mathematical models of various components is established, including the engine thermal efficiency map and the motor efficiency map. The comprehensive charging/discharging efficiency model and energy management optimization strategy model which is proposed to maximize the efficiency of instantaneous HPGHP system are established. Then, different charging/discharging torque limits are obtained. Finally, a novel gas engine economical zone control strategy which combined with the SOC of battery in real time is put forward. The main operating parameters of HPGHP system under energy management are simulated by Matlab/Simulink and validated by experimental data, such as engine and motor operating torque, fuel consumption rate and comprehensive efficiency, etc. The results show that during 3600 s’ run-time, the SOC value of battery packs varies between 0.58 and 0.705, the fuel consumption rate reaches minimum values of approximately 291.3 g/(kW h when the compressor speed is nearly 1550 rpm in mode D, the engine thermal efficiency and comprehensive efficiency reach maximum values of approximately 0.2727 and 0.2648 when the compressor speed is 1575 rpm and 1475 rpm, respectively, in mode D. In general, the motor efficiency can be maintained above 0.85 in either mode.

Application research of power allocation based on Buck circuit in DC microgrid

OpenAIRE

Wang Zihao; Zhou Mingyu

2017-01-01

In a traditional DC microgrid, the power sharing control strategy has been always used in the distributed power converters, resulting in not making outer power allocation arbitrarily. In order to solve the power output allocation problem of wind power in DC microgrid, the intelligent Buck circuit based on PI algorithm and the load current feed-forward method was used to realize the arbitrary regulation of the output power of the wind power in the DC microgrid system. Compared with traditional...

Flow control of micro-ramps on supersonic forward-facing step flow

International Nuclear Information System (INIS)

Zhang Qing-Hu; Zhu Tao; Wu Anping; Yi Shihe

2016-01-01

The effects of the micro-ramps on supersonic turbulent flow over a forward-facing step (FFS) was experimentally investigated in a supersonic low-noise wind tunnel at Mach number 3 using nano-tracer planar laser scattering (NPLS) and particle image velocimetry (PIV) techniques. High spatiotemporal resolution images and velocity fields of supersonic flow over the testing model were captured. The fine structures and their spatial evolutionary characteristics without and with the micro-ramps were revealed and compared. The large-scale structures generated by the micro-ramps can survive the downstream FFS flowfield. The micro-ramps control on the flow separation and the separation shock unsteadiness was investigated by PIV results. With the micro-ramps, the reduction in the range of the reversal flow zone in streamwise direction is 50% and the turbulence intensity is also reduced. Moreover, the reduction in the average separated region and in separation shock unsteadiness are 47% and 26%, respectively. The results indicate that the micro-ramps are effective in reducing the flow separation and the separation shock unsteadiness. (paper)

Empirical evaluation of the efficiency of the Iberian power futures market

Directory of Open Access Journals (Sweden)

Álvaro Capitán Herráiz

2008-12-01

Full Text Available Market efficiency is analysed for the Iberian Power Futures Market and other European Power Markets, as well as other fuel markets through evaluation of ex-post Forward Risk Premium. The equilibrium price from compulsory call auctions for distribution companies within the framework of the Iberian Power Futures Market is not optimal for remuneration purposes as it seems to be slightly upward biased, though such a premium is not significant (only around 2% above the average of Settlement Prices. In the period considered (August 2006 to September 2008, monthly futures contracts behave similarly to quarterly contracts. Average risk premia have been positive in power and natural gas markets but negative in oil and coal markets. Different hypotheses are tested regarding increasing volatility with maturity and regarding Forward Risk Premium correlations (negative with variance of spot prices during delivery period and positive with skewness of spot prices during delivery period. Enlarged data sets are recommended for stronger test results. Energy markets tend to show limited levels of market efficiency. Regarding the emerging Iberian Power Futures Market, price efficiency is improved with market development and with further integration of European Regional Power Markets.

Recent results from low-x and forward physics at HERA

Energy Technology Data Exchange (ETDEWEB)

Goerlich, Lidia [Institute of Nuclear Physics PAN, Radzikowskiego 152, 31-342 Krakow (Poland); Collaboration: H1 Collaboration

2013-04-15

The production of forward jets in inclusive as well as diffractive deep inelastic scattering at HERA is studied with the H1 detector. For inclusive DIS events at low Q{sup 2} with a forward jet, produced close to the proton remnant, differential cross sections and normalised distributions are measured as a function of the azimuthal angle difference between the forward jet and the scattered positron. Results on dijet production cross sections are also presented for diffractive DIS events in which the final state proton is tagged in the H1 Forward Proton Spectrometer. Two topologies are investigated by either requiring the two jets being produced centrally or by requiring that one of the jets is going in the forward direction. The data are compared with NLO QCD predictions as well as leading order Monte Carlo models.

Fault analysis and strategy of high pulsed power supply for high power laser

International Nuclear Information System (INIS)

Liu Kefu; Qin Shihong; Li Jin; Pan Yuan; Yao Zonggan; Zheng Wanguo; Guo Liangfu; Zhou Peizhang; Li Yizheng; Chen Dehuai

2001-01-01

according to the requirements of driving flash-lamp, a high pulsed power supply (PPS) based on capacitors as energy storage elements is designed. The author analyzes in detail the faults of high pulsed power supply for high power laser. Such as capacitor internal short-circuit, main bus breakdown to ground, flashlamp sudden short or break. The fault current and voltage waveforms were given by circuit simulations. Based on the analysis and computation, the protection strategy with the fast fuse and ZnO was put forward, which can reduce the damage of PPS to the lower extent and provide the personnel safe and collateral property from the all threats. The preliminary experiments demonstrated that the design of the PPS can satisfy the project requirements

Additive Feed Forward Control with Neural Networks

DEFF Research Database (Denmark)

Sørensen, O.

1999-01-01

This paper demonstrates a method to control a non-linear, multivariable, noisy process using trained neural networks. The basis for the method is a trained neural network controller acting as the inverse process model. A training method for obtaining such an inverse process model is applied....... A suitable 'shaped' (low-pass filtered) reference is used to overcome problems with excessive control action when using a controller acting as the inverse process model. The control concept is Additive Feed Forward Control, where the trained neural network controller, acting as the inverse process model......, is placed in a supplementary pure feed-forward path to an existing feedback controller. This concept benefits from the fact, that an existing, traditional designed, feedback controller can be retained without any modifications, and after training the connection of the neural network feed-forward controller...

Tritium concentration in ambient air around Kaiga Nuclear Power Plant

Directory of Open Access Journals (Sweden)

Srinivas S Kamath

2018-01-01

Full Text Available Tritium (3H is one of the important long-lived radioisotopes in the gaseous effluent from nuclear power plants. In this article, we present the results of 3H monitoring in ambient air samples around the Kaiga Nuclear Power Plant, on the West Coast of India. Air samples were collected by moisture condensation method and the 3H concentration was determined by liquid scintillation spectrometry. The 3H concentration in the 2.3–15 km zone of the power plant varied in the range of <0.04–6.64 Bq m−3 with a median of 0.67 Bq m−3. The samples collected from the 2.3–5 km zone of the power plant exhibit marginally higher concentration when compared to the 5–10 km and 10–15 km zones, which is as expected. The values observed in the present study for Kaiga region are similar to those reported from other nuclear power plants, both within India and other parts of the world.

Comparison Of Power Quality Disturbances Classification Based On Neural Network

Directory of Open Access Journals (Sweden)

Nway Nway Kyaw Win

2015-07-01

Full Text Available Abstract Power quality disturbances PQDs result serious problems in the reliability safety and economy of power system network. In order to improve electric power quality events the detection and classification of PQDs must be made type of transient fault. Software analysis of wavelet transform with multiresolution analysis MRA algorithm and feed forward neural network probabilistic and multilayer feed forward neural network based methodology for automatic classification of eight types of PQ signals flicker harmonics sag swell impulse fluctuation notch and oscillatory will be presented. The wavelet family Db4 is chosen in this system to calculate the values of detailed energy distributions as input features for classification because it can perform well in detecting and localizing various types of PQ disturbances. This technique classifies the types of PQDs problem sevents.The classifiers classify and identify the disturbance type according to the energy distribution. The results show that the PNN can analyze different power disturbance types efficiently. Therefore it can be seen that PNN has better classification accuracy than MLFF.

Forward-central jet correlations in pp collisions at CMS

International Nuclear Information System (INIS)

Ribeiro Cipriano, Pedro Miguel

2014-03-01

The azimuthal correlation between central and forward jets has been measured in proton-proton collisions at the LHC recorded with the CMS detector at a centre-of-mass energy of 7 TeV. Both jets were required to have a minimum transverse momentum of 35 GeV. The forward jet was reconstructed in the hadronic forward calorimeter within the pseudo-rapidity range 3.2 T >20 GeV in the pseudo rapidity interval between the forward and the central jet is required, while in the second sub-sample events containing such jets are explicitly vetoed. Furthermore, observables describing additional jets outside of the pseudo-rapidity interval spanned by the dijet system are measured. Most of the results are found to be well described by DGLAP-based Monte Carlo event generators.

Forward jet production in deep inelastic scattering at HERA

International Nuclear Information System (INIS)

Aktas, A.; Andreev, V.; Anthonis, T.

2005-08-01

The production of forward jets has been measured in deep inelastic ep collisions at HERA. The results are presented in terms of single differential cross sections as a function of the Bjorken scaling variable (x Bj ) and as triple differential cross sections d 3 σ/dx Bj dQ 2 dp t,jet 2 , where Q 2 is the four momentum transfer squared and p t,jet 2 is the squared transverse momentum of the forward jet. Also cross sections for events with a di-jet system in addition to the forward jet are measured as a function of the rapidity separation between the forward jet and the two additional jets. The measurements are compared with next-to-leading order QCD calculations and with the predictions of various QCD-based models. (orig.)

Forward Jet Production in Deep Inelastic Scattering at HERA

CERN Document Server

Aktas, A.; Anthonis, T.; Aplin, S.; Asmone, A.; Astvatsatourov, A.; Babaev, A.; Backovic, S.; Bahr, J.; Baghdasaryan, A.; Baranov, P.; Barrelet, E.; Bartel, W.; Baudrand, S.; Baumgartner, S.; Becker, J.; Beckingham, M.; Behnke, O.; Behrendt, O.; Belousov, A.; Berger, Ch.; Berger, N.; Bizot, J.C.; Boenig, M.-O.; Boudry, V.; Bracinik, J.; Brandt, G.; Brisson, V.; Bruncko, D.; Busser, F.W.; Bunyatyan, A.; Buschhorn, G.; Bystritskaya, L.; Campbell, A.J.; Caron, S.; Cassol-Brunner, F.; Cerny, K.; Cerny, V.; Chekelian, V.; Contreras, J.G.; Coughlan, J.A.; Cox, B.E.; Cozzika, G.; Cvach, J.; Dainton, J.B.; Dau, W.D.; Daum, K.; de Boer, Y.; Delcourt, B.; De Roeck, A.; Desch, K.; De Wolf, E.A.; Diaconu, C.; Dodonov, V.; Dubak, A.; Eckerlin, Guenter; Efremenko, V.; Egli, S.; Eichler, R.; Eisele, F.; Ellerbrock, M.; Elsen, E.; Erdmann, W.; Essenov, S.; Falkewicz, A.; Faulkner, P.J.W.; Favart, L.; Fedotov, A.; Felst, R.; Ferencei, J.; Finke, L.; Fleischer, M.; Fleischmann, P.; Flucke, G.; Fomenko, A.; Foresti, I.; Franke, G.; Frisson, T.; Gabathuler, E.; Garutti, E.; Gayler, J.; Gerlich, C.; Ghazaryan, Samvel; Ginzburgskaya, S.; Glazov, A.; Glushkov, I.; Goerlich, L.; Goettlich, M.; Gogitidze, N.; Gorbounov, S.; Goyon, C.; Grab, C.; Greenshaw, T.; Gregori, M.; Grell, B.R.; Grindhammer, Guenter; Gwilliam, C.; Haidt, D.; Hajduk, L.; Hansson, M.; Heinzelmann, G.; Henderson, R.C.W.; Henschel, H.; Henshaw, O.; Herrera, G.; Hildebrandt, M.; Hiller, K.H.; Hoffmann, D.; Horisberger, R.; Hovhannisyan, A.; Hreus, T.; Hussain, S.; Ibbotson, M.; Ismail, M.; Jacquet, M.; Janauschek, L.; Janssen, X.; Jemanov, V.; Jonsson, L.; Johnson, D.P.; Jung, Andreas Werner; Jung, H.; Kapichine, M.; Katzy, J.; Kenyon, I.R.; Kiesling, Christian M.; Klein, M.; Kleinwort, C.; Klimkovich, T.; Kluge, T.; Knies, G.; Knutsson, A.; Korbel, V.; Kostka, P.; Krastev, K.; Kretzschmar, J.; Kropivnitskaya, A.; Kruger, K.; Kuckens, J.; Landon, M.P.J.; Lange, W.; Lastovicka, T.; Lastovicka-Medin, G.; Laycock, P.; Lebedev, A.; Leibenguth, G.; Lendermann, V.; Levonian, S.; Lindfeld, L.; Lipka, K.; Liptaj, A.; List, B.; List, J.; Lobodzinska, E.; Loktionova, N.; Lopez-Fernandez, R.; Lubimov, V.; Lucaci-Timoce, A.-I.; Lueders, H.; Luke, D.; Lux, T.; Lytkin, L.; Makankine, A.; Malden, N.; Malinovski, E.; Mangano, S.; Marage, P.; Marshall, R.; Martisikova, M.; Martyn, H.-U.; Maxeld, S.J.; Meer, D.; Mehta, A.; Meier, K.; Meyer, A.B.; Meyer, H.; Meyer, J.; Mikocki, S.; Milcewicz-Mika, I.; Milstead, D.; Mladenov, D.; Mohamed, A.; Moreau, F.; Morozov, A.; Morris, J.V.; Mozer, Matthias Ulrich; Muller, K.; Murin, P.; Nankov, K.; Naroska, B.; Naumann, Th.; Newman, Paul R.; Niebuhr, C.; Nikiforov, A.; Nikitin, D.; Nowak, G.; Nozicka, M.; Oganezov, R.; Olivier, B.; Olsson, J.E.; Osman, S.; Ozerov, D.; Palichik, V.; Panagoulias, I.; Papadopoulou, T.; Pascaud, C.; Patel, G.D.; Peez, M.; Perez, E.; Perez-Astudillo, D.; Perieanu, A.; Petrukhin, A.; Pitzl, D.; Placakyte, R.; Portheault, B.; Povh, B.; Prideaux, P.; Rahmat, A.J.; Raicevic, N.; Reimer, P.; Rimmer, A.; Risler, C.; Rizvi, E.; Robmann, P.; Roland, B.; Roosen, R.; Rostovtsev, A.; Rurikova, Z.; Rusakov, S.; Salvaire, F.; Sankey, D.P.C.; Sauvan, E.; Schatzel, S.; Schilling, F.-P.; Schmidt, S.; Schmitt, S.; Schmitz, C.; Schoeffel, L.; Schoning, A.; Schultz-Coulon, H.-C.; Sedlak, K.; Sefkow, F.; Shaw-West, R.N.; Sheviakov, I.; Shtarkov, L.N.; Sloan, T.; Smirnov, P.; Soloviev, Y.; South, D.; Spaskov, V.; Specka, Arnd E.; Stella, B.; Stiewe, J.; Strauch, I.; Straumann, U.; Tchoulakov, V.; Thompson, Graham; Thompson, P.D.; Tomasz, F.; Traynor, D.; Truoel, Peter; Tsakov, I.; Tsipolitis, G.; Tsurin, I.; Turnau, J.; Tzamariudaki, E.; Urban, Marcel; Usik, A.; Utkin, D.; Valkar, S.; Valkarova, A.; Vallee, C.; Van Mechelen, P.; Vargas Trevino, A.; Vazdik, Y.; Veelken, C.; Vest, A.; Vinokurova, S.; Volchinski, V.; Vujicic, B.; Wacker, K.; Wagner, J.; Weber, G.; Weber, R.; Wegener, D.; Werner, C.; Wessels, M.; Wessling, B.; Wigmore, C.; Wissing, Ch.; Wolf, R.; Wunsch, E.; Xella, S.; Yan, W.; Yeganov, V.; Zacek, J.; Zalesak, J.; Zhang, Z.; Zhelezov, A.; Zhokin, A.; Zhu, Y.C.; Zimmermann, J.; Zimmermann, T.; Zohrabyan, H.; Zomer, F.

2006-01-01

The production of forward jets has been measured in deep inelastic ep collisions at HERA. The results are presented in terms of single differential cross sections as a function of the Bjorken scaling variable (x_{Bj}) and as triple differential cross sections d^3 \\sigma / dx_{Bj} dQ^2 dp_{t,jet}^2, where Q^2 is the four momentum transfer squared and p_{t,jet}^2 is the squared transverse momentum of the forward jet. Also cross sections for events with a di-jet system in addition to the forward jet are measured as a function of the rapidity separation between the forward jet and the two additional jets. The measurements are compared with next-to-leading order QCD calculations and with the predictions of various QCD-based models.

The importance of Radio Quiet Zone (RQZ) for radio astronomy

Science.gov (United States)

Umar, Roslan; Abidin, Zamri Zainal; Ibrahim, Zainol Abidin

2013-05-01

Most of radio observatories are located in isolated areas. Since radio sources from the universe is very weak, astronomer need to avoid radio frequency interference (RFI) from active spectrum users and radio noise produced by human made (telecommunication, mobile phone, microwave user and many more. There are many observatories around the world are surrounded by a Radio Quiet Zone (RQZ), which is it was set up using public or state laws. A Radio Quiet Zone normally consists of two areas: an exclusive area in which totally radio emissions are forbidden, with restrictions for residents and business developments, and a larger (radius up to 100 km above) coordination area where the power of radio transmission limits to threshold levels. Geographical Information System (GIS) can be used as a powerful tool in mapping large areas with varying RQZ profiles. In this paper, we report the initial testing of the usage of this system in order to identify the areas were suitable for Radio Quiet Zone. Among the important parameters used to develop the database for our GIS are population density, information on TV and telecommunication (mobile phones) transmitters, road networks (highway), and contour shielding. We will also use other information gathered from on-site RFI level measurements on selected 'best' areas generated by the GIS. The intention is to find the best site for the purpose of establishing first radio quiet zones for radio telescope in Malaysia.

Development and fabrication of a high current, fast recovery power diode

Science.gov (United States)

Berman, A. H.; Balodis, V.; Devance, D. C.; Gaugh, C. E.; Karlsson, E. A.

1983-01-01

A high voltage (VR = 1200 V), high current (IF = 150 A), fast recovery ( 700 ns) and low forward voltage drop ( 1.5 V) silicon rectifier was designed and the process developed for its fabrication. For maximum purity, uniformity and material characteristic stability, neutron transmutation n-type doped float zone silicon is used. The design features a hexagonal chip for maximum area utilization of space available in the DO-8 diode package, PIN diffused junction structure with deep diffused D(+) anode and a shallow high concentration n(+) cathode. With the high temperature glass passivated positive bevel mesa junction termination, the achieved blocking voltage is close to the theoretical limit of the starting material. Gold diffusion is used to control the lifetime and the resulting effect on switching speed and forward voltage tradeoff. For solder reflow assembly, trimetal (Al-Ti-Ni) contacts are used. The required major device electrical characteristics were achieved. Due to the tradeoff nature of forward voltage drop and reverse recovery time, a compromise was reached for these values.

Saturation and forward jets at HERA

International Nuclear Information System (INIS)

Marquet, C.; Peschanski, R.; Royon, C.

2004-01-01

We analyse forward-jet production at HERA in the framework of the Golec-Biernat and Wusthoff saturation models. We obtain a good description of the forward-jet cross-sections measured by the H1 and ZEUS Collaborations in the two-hard-scale region (k T∼ Q >> Λ QCD ) with two different parametrizations with either significant or weak saturation effects. The weak saturation parametrization gives a scale compatible with the one found for the proton structure function F2. We argue that Mueller-Navelet jets at the Tevatron and the LHC could help distinguishing between both options

Experimental constraints on partitioning and zoning of phosphorus in igneous olivine

Science.gov (United States)

Ersoy, Ö.; Nikogosian, I.; Mason, P. R. D.; Van Westrenen, W.; van Bergen, M.

2017-12-01

Fast diffusion and homogenization of divalent cations hamper the preservation of original chemical compositions and zoning patterns of igneous olivine phenocrysts. Sluggish intracrystalline diffusion of phosphorus in igneous olivine on the other hand allows the complex zoning patterns to be retained, making it a crucial element for reconstruction of cooling histories and evolution of the host magma. Crystallization rate variations, diffusion controlled growth or compositional controls on melt-mineral partitioning have been put forward as mechanisms controlling zoning of igneous olivine in phosphorus. Here, we investigate partitioning and zoning of phosphorus in igneous olivines by a comparison of natural and experimentally grown olivines. We explore the importance of variable degrees of undercooling and cooling rates in crystallizing melt (M1) with a starting composition equivalent to that of an Italian high-potassium basalt (Tliq=1274 °C). We examine the extent of compositional control on partitioning by varying the amount of alkali enrichment in starting compositions that are otherwise equivalent to melt M1. Olivine crystallization experiments were conducted in rhenium capsules suspended in a vertical 1-atm gas-mixing furnace at Vrije Universiteit Amsterdam (VUA) with fO2 buffered at 1.4 to 1.7 log units below the Ni-NiO buffer. Sets of dynamic crystallization experiments with various degrees of undercooling and controlled cooling rate experiments with varying cooling rates were performed. We compare the results with our extensive EPMA and LA-ICPMS dataset on olivines from Italian K-rich mafic lavas and olivine hosted primitive melt inclusions (MIs). Phosphorus concentrations in the natural olivines reach 435 ppm P and MIs contain up to 2.2 wt.% P2O5. High resolution (1-4 µm per pixel) element maps show both fine oscillatory, patchy and large scale sector zoning in P, uncorrelated with zoning in any other element. The MIs are almost always found in P-poor zones

Fault Identification Algorithm Based on Zone-Division Wide Area Protection System

Directory of Open Access Journals (Sweden)

Xiaojun Liu

2014-04-01

Full Text Available As the power grid becomes more magnified and complicated, wide-area protection system in the practical engineering application is more and more restricted by the communication level. Based on the concept of limitedness of wide-area protection system, the grid with complex structure is divided orderly in this paper, and fault identification and protection action are executed in each divided zone to reduce the pressure of the communication system. In protection zone, a new wide-area protection algorithm based on positive sequence fault components directional comparison principle is proposed. The special associated intelligent electronic devices (IEDs zones which contain buses and transmission lines are created according to the installation location of the IEDs. When a fault occurs, with the help of the fault information collecting and sharing from associated zones with the fault discrimination principle defined in this paper, the IEDs can identify the fault location and remove the fault according to the predetermined action strategy. The algorithm will not be impacted by the load changes and transition resistance and also has good adaptability in open phase running power system. It can be used as a main protection, and it also can be taken into account for the back-up protection function. The results of cases study show that, the division method of the wide-area protection system and the proposed algorithm are effective.

Force-Velocity-Power Assessment in Semiprofessional Rugby Union Players.

Science.gov (United States)

McMaster, Daniel T; Gill, Nicholas D; Cronin, John B; McGuigan, Michael R

2016-04-01

There is a constant and necessary evolution of training and assessment methods in the elite contact sports; as is required to continually improve the physical qualities of these respective athletes to match the growing sport and position-specific performance demands. Our aim was to examine the differences between ballistic upper body performance profiles and maximum upper body strength of elite rugby union forwards and backs. Twenty semiprofessional male rugby union players (age = 21.1 ± 3.0 years; mass = 94.9 ± 9.7 kg) were assessed for maximum bench press strength (1RM bench press = 121.3 ± 21.8 kg) and maximum throw power (Pmax), force (Fmax), and velocity (V[Combining Dot Above]max) from an incremental relative load testing protocol (15, 30, 45, 60, and 75% 1RM). Player rankings were also included to identify individual strength and weaknesses. The forwards were moderately stronger (effect size [ES] = 0.96; p = 0.01), produced significantly greater Fmax (ES = 1.17-1.41; p = 0.01) and were more powerful (ES = 0.57-0.64; p 0.15). There were inherent differences in strength and Fmax between the forwards and backs most likely because of the physical demands of these respective positions. Improvements in upper body strength may in turn improve ballistic force and power production, but not necessarily velocity capabilities. From the Fmax and V[Combining Dot Above]max observations, the forwards seem to be more force dominant and the backs more velocity dominant. Pmax, Fmax, and V[Combining Dot Above]max may be used to highlight proficient and deficient areas in ballistic upper body performance; the individual rankings could be further used to identify and possibly rectify individual deficiencies.

Fascicle behaviour analysis during forward lunge exercise: the ...

African Journals Online (AJOL)

This study was conducted to determine and compare the fascicle behaviour during forward lunge exercise with different loadings lifted. Thirty recreationally active, untrained men (mean age = 21 ± 0.83 years old) were recruited and were assigned to perform forward lunge with 30% 1RM (30FL) and 70% 1RM (70FL) with ...

1 GHz GaAs Buck Converter for High Power Amplifier Modulation Applications

NARCIS (Netherlands)

Busking, E.B.; Hek, A.P. de; Vliet, F.E. van

2012-01-01

A fully integrated 1 GHz buck converter output stage, including on-chip inductor and DC output filtering has been realized, in a standard high-voltage breakdown GaAs MMIC technology. This is a significant step forward in designing highspeed power control of supply-modulated HPAs (high power

Electro-thermal analysis and optimisation of edge termination of power diode supported by 2-D/3-D numerical modelling and simulation

International Nuclear Information System (INIS)

Príbytný, P; Donoval, D; Chvála, A; Marek, J; Molnár, M

2014-01-01

Numerical modelling and simulation provide an efficient tool for analysis and optimization of device structure design. In this paper we present the analysis and the geometry optimization of the power module with high power pin diode structure supported by the advanced 2-D/3-D mixed-mode electro-thermal device simulation. The structure under investigation is P + NN + power diode device designed for high reverse voltages and very high forward currents, with a maximum forward surge current up to 2.7 kA.

Lepton forward-backward asymmetries

International Nuclear Information System (INIS)

Pain, R.

1992-01-01

Results of Forward-Backward Asymmetries with Leptons measured at Z 0 energies are presented. Details of the analysis by the DELPHI Collaboration are given together with the most recent values of the peak Asymmetries for electrons, muons and taus obtained by ALEPH, DELPHI, L3 and OPAL Collaborations at LEP

The role of co-located storage for wind power producers in conventional electricity markets

KAUST Repository

Bitar, E.; Rajagopal, R.; Khargonekar, P.; Poolla, K.

2011-01-01

In this paper we study the problem of optimizing contract offerings for an independent wind power producer (WPP) participating in conventional day-ahead forward electricity markets for energy. As wind power is an inherently variable source of energy

Impact of UO{sub 2} Enrichment of Fuel Zoning Rods in Long Cycle Operation of PWR

Energy Technology Data Exchange (ETDEWEB)

Shin, Ho Cheol; Lee, Deokjung [KHNP CRI, Daejeon (Korea, Republic of); Jeong, Eun; Choe, Jiwon [UNIST, Ulsan (Korea, Republic of)

2016-10-15

Extending the cycle length can not only increase the energy production, but also bring down outage costs by reducing the number of refueling outages during the lifetime of a nuclear power plant. It is reasonable that more fresh fuels are loaded for long cycle operation. However, minimizing the number of fresh fuels is essential in aspect of fuel economics. This can cause high power peaking near the water holes, due to increased thermalization of neutrons in those regions. To prevent this, special fuel zoning rods are used and surround the water holes. These rods use lower-enriched uranium (they have an enrichment rate lower than the other fuel rods). If we adjust the enrichment rate of fuel zoning rods, we can reduce power peaking and moreover increase cycle length. In this paper, we designed a core suitable for long cycle operation and we conducted sensitivity tests of fuel cycle length on UO2 enrichment rate in fuel zoning region in order to extend the cycle length while using the same number of fresh fuels. The correlations between the fuel zoning enrichment and cycle length, peaking factor, CBC and shutdown margin were analyzed. The more the enrichment rate in fuel zoning region increases, the more the fuel cycle length increases. At the same time, CBC, Fq and shutdown margin do not change significantly. Increasing the fuel zoning enrichment rate presents the right property of increasing the fuel cycle length without causing a large change to CBC, Fq and shutdown margin. In conclusion, by increasing the uranium enrichment rate in fuel zoning region, fuel cycle length can be increased and the safety margins can be maintained for long cycle operation of cores.

Micromechanics of the human vertebral body for forward flexion.

Science.gov (United States)

Yang, Haisheng; Nawathe, Shashank; Fields, Aaron J; Keaveny, Tony M

2012-08-09

To provide mechanistic insight into the etiology of osteoporotic wedge fractures, we investigated the spatial distribution of tissue at the highest risk of initial failure within the human vertebral body for both forward flexion and uniform compression loading conditions. Micro-CT-based linear elastic finite element analysis was used to virtually load 22 human T9 vertebral bodies in either 5° of forward flexion or uniform compression; we also ran analyses replacing the simulated compliant disc (E=8 MPa) with stiff polymethylmethacrylate (PMMA, E=2500 MPa). As expected, we found that, compared to uniform compression, forward flexion increased the overall endplate axial load on the anterior half of the vertebra and shifted the spatial distribution of high-risk tissue within the vertebra towards the anterior aspect of the vertebral body. However, despite that shift, the high-risk tissue remained primarily within the central regions of the trabecular bone and endplates, and forward flexion only slightly altered the ratio of cortical-to-trabecular load sharing at the mid-vertebral level (mean±SD for n=22: 41.3±7.4% compression; 44.1±8.2% forward flexion). When the compliant disc was replaced with PMMA, the anterior shift of high-risk tissue was much more severe. We conclude that, for a compliant disc, a moderate degree of forward flexion does not appreciably alter the spatial distribution of stress within the vertebral body. Copyright © 2012 Elsevier Ltd. All rights reserved.

The resource adequacy scheme in the Korean electricity market

International Nuclear Information System (INIS)

Kim, Hyunsook; Kim, Sung-Soo

2012-01-01

In South Korea, the incentive scheme for generators to add new power generation is based on the system marginal price (SMP) and the capacity payment (CP). The infra-marginal generators receive an extra margin due to the high SMP level and the new infra-marginal generators need to be built to achieve the optimal fuel mix. However, the Metropolitan zone needs more marginal generators due to the transmission congestion and environmental regulations, but the marginal generator in the Metropolitan zone does not have adequate profits for the new investment under the current CP. This paper suggests the appropriate investment incentive scheme for different zones. The introduction of forward capacity markets for different regions creates higher capacity market prices in the Metropolitan zone than those in the Southern zone. The introduction of forward capacity market also induces a new LNG generator investment in the Metropolitan zone while only new infra-marginal generators need to be added in the Southern zone. - Highlights: ► We suggest the introduction of a capacity market for resource adequacy in Korea. ► The current capacity payment does not induce the optimal fuel mix. ► The Southern zone needs more infra-marginal generators. ► The Metropolitan zone needs marginal generators due to transmission congestion. ► Zonal capacity markets induce the efficient generation investment across zones.

Wind power scenario generation through state-space specifications for uncertainty analysis of wind power plants

International Nuclear Information System (INIS)

Díaz, Guzmán; Gómez-Aleixandre, Javier; Coto, José

2016-01-01

Highlights: • State space representations for simulating wind power plant output are proposed. • The representation of wind speed in state space allows structural analysis. • The joint model incorporates the temporal and spatial dependence structure. • The models are easily integrable into a backward/forward sweep algorithm. • Results evidence the remarkable differences between joint and marginal models. - Abstract: This paper proposes the use of state space models to generate scenarios for the analysis of wind power plant (WPP) generation capabilities. The proposal is rooted on the advantages that state space models present for dealing with stochastic processes; mainly their structural definition and the use of Kalman filter to naturally tackle some involved operations. The specification proposed in this paper comprises a structured representation of individual Box–Jenkins models, with indications about further improvements that can be easily performed. These marginal models are combined to form a joint model in which the dependence structure is easily handled. Indications about the procedure to calibrate and check the model, as well as a validation of its statistical appropriateness, are provided. Application of the proposed state space models provides insight on the need to properly specify the structural dependence between wind speeds. In this paper the joint and marginal models are smoothly integrated into a backward–forward sweep algorithm to determine the performance indicators (voltages and powers) of a WPP through simulation. As a result, visibly heavy tails emerge in the generated power probability distribution through the use of the joint model—incorporating a detailed description of the dependence structure—in contrast with the normally distributed power yielded by the margin-based model.

A look back and a look forward

International Nuclear Information System (INIS)

McDonald, J. C.

2012-01-01

Roman mythology described Janus as the god of beginnings and transitions. Janus was depicted as having two heads facing in opposite directions that could be thought of as the future and the past. Therefore, it is altogether appropriate that the first month of our calendar should be named after Janus because it is a time of passage from the old to the new year. There were a number of significant events and developments during the past year, and one can look forward to a number of new and, perhaps, unexpected developments during the year to come. The year 2011 saw the tragedy of a major earthquake and Tsunami in Japan resulting in a disastrous series of explosions at the Fukushima I Nuclear Power Plant. Releases of radionuclides to the atmosphere and depositions in the immediate vicinity of the plant have required remediation efforts on the part of the Japanese government, with help from a number of other nations. This accident was classified as Level 7, the highest level, on the International Nuclear Event Scale. (author)

Severe Psychological Distress of Evacuees in Evacuation Zone Caused by the Fukushima Daiichi Nuclear Power Plant Accident: The Fukushima Health Management Survey.

Science.gov (United States)

Kunii, Yasuto; Suzuki, Yuriko; Shiga, Tetsuya; Yabe, Hirooki; Yasumura, Seiji; Maeda, Masaharu; Niwa, Shin-Ichi; Otsuru, Akira; Mashiko, Hirobumi; Abe, Masafumi

2016-01-01

Following the Great East Japan Earthquake on March 11, 2011, the nuclear disaster at the Fukushima Daiichi Nuclear Power Plant has continued to affect the mental health status of residents in the evacuation zone. To examine the mental health status of evacuee after the nuclear accident, we conducted the Mental Health and Lifestyle Survey as part of the ongoing Fukushima Health Management Survey. We measured mental health status using the Kessler 6-item psychological distress scale (K6) in a total of 73,569 (response rate: 40.7%) evacuees aged 15 and over who lived in the evacuation zone in Fukushima Prefecture. We then dichotomized responders using a 12/13 cutoff on the K6, and compared the proportion of K6 scores ≥13 and ≤12 in each risk factor including demographic information, socioeconomic variables, and disaster-related variables. We also performed bivariate analyses between mental health status and possible risk factors using the chi-square test. Furthermore, we performed multivariate regression analysis using modified Poisson regression models. The median K6 score was 5 (interquartile range: 1-10). The number of psychological distress was 8,717 (14.6%). We found that significant differences in the prevalence of psychological distress by almost all survey items, including disaster-related risk factors, most of which were also associated with increased Prevalence ratios (PRs). Additionally, we found that psychological distress in each evacuation zone was significantly positively associated with the radiation levels in their environment (r = 0.768, p = 0.002). The earthquake, tsunami and subsequent nuclear accident likely caused severe psychological distress among residents in the evacuation zone in Fukushima Prefecture. The close association between psychological distress and the radiation levels shows that the nuclear accident seriously influenced the mental health of the residents, which might be exacerbated by increased risk perception. To provide

Fuzzy-logic-based power control system for multifield electrostatic precipitators

Energy Technology Data Exchange (ETDEWEB)

Grass, N. [Siemens AG, Erlangen (Germany)

2002-10-01

The power consumption of large precipitators can be in the range of 1 MW and above. Depending on the dust load properties, the electrical power may be reduced by up to 50% by applying fuzzy logic, without significantly increasing the dust emissions. The new approach uses fuzzy logic for optimization of existing electrostatic precipitators. The software runs on a standard personal computer platform under the, Windows NT operating system. The controllers of the electrostatic precipitator power supplies are linked to the personal computer via an industrial network (e.g., PROFIBUS). The system determines online the differentials of emission versus electrical power of each field. This measurement is difficult because of overlaid events in the other zones, and process changes. The long response time of the resultant dust emission due to electrical power changes in the precipitator is an additional complication. Rules were defined for a coarse, but fast-response power adaptation of all zones. Fine tuning the running system after the coarse optimization increased the accuracy and reliability. When installed on a 4 x 5 zone precipitator in a power station, significant results were obtained. The power savings over three months of operation were in the range of 40%-60% depending on the load and fuel characteristics. Data were recorded over the test period of three months. The results are presented.

Risky forward interest rates and swaptions: Quantum finance model and empirical results

Science.gov (United States)

Baaquie, Belal Ehsan; Yu, Miao; Bhanap, Jitendra

2018-02-01

Risk free forward interest rates (Diebold and Li, 2006 [1]; Jamshidian, 1991 [2 ]) - and their realization by US Treasury bonds as the leading exemplar - have been studied extensively. In Baaquie (2010), models of risk free bonds and their forward interest rates based on the quantum field theoretic formulation of the risk free forward interest rates have been discussed, including the empirical evidence supporting these models. The quantum finance formulation of risk free forward interest rates is extended to the case of risky forward interest rates. The examples of the Singapore and Malaysian forward interest rates are used as specific cases. The main feature of the quantum finance model is that the risky forward interest rates are modeled both a) as a stand-alone case as well as b) being driven by the US forward interest rates plus a spread - having its own term structure -above the US forward interest rates. Both the US forward interest rates and the term structure for the spread are modeled by a two dimensional Euclidean quantum field. As a precursor to the evaluation of put option of the Singapore coupon bond, the quantum finance model for swaptions is tested using empirical study of swaptions for the US Dollar -showing that the model is quite accurate. A prediction for the market price of the put option for the Singapore coupon bonds is obtained. The quantum finance model is generalized to study the Malaysian case and the Malaysian forward interest rates are shown to have anomalies absent for the US and Singapore case. The model's prediction for a Malaysian interest rate swap is obtained.

Cache Aided Decode-and-Forward Relaying Networks: From the Spatial View

Directory of Open Access Journals (Sweden)

Junjuan Xia

2018-01-01

Full Text Available We investigate cache technique from the spatial view and study its impact on the relaying networks. In particular, we consider a dual-hop relaying network, where decode-and-forward (DF relays can assist the data transmission from the source to the destination. In addition to the traditional dual-hop relaying, we also consider the cache from the spatial view, where the source can prestore the data among the memories of the nodes around the destination. For the DF relaying networks without and with cache, we study the system performance by deriving the analytical expressions of outage probability and symbol error rate (SER. We also derive the asymptotic outage probability and SER in the high regime of transmit power, from which we find the system diversity order can be rapidly increased by using cache and the system performance can be significantly improved. Simulation and numerical results are demonstrated to verify the proposed studies and find that the system power resources can be efficiently saved by using cache technique.

The Demand Side Response to Multi-zone Tariffs. Consumer Test Results

Directory of Open Access Journals (Sweden)

Adam Olszewski

2015-12-01

Full Text Available Advanced Metering Infrastructure (AMI is a technologically advanced solution currently implemented by the most innovative distribution system operators. ENERGA-OPERATOR SA set about preparing for smart metering implementation in 2010. So far the company has installed over 400,000 meters in its area, and plans to install a further 450,000 in 2015. Kalisz, the first fully AMI-covered city in Poland, was chosen for an in-depth analysis of the system. In particular, a consumer test was conducted there with the intention of answering the question about the strength of the demand side response to multi-zone tariffs and power reduction. Conclusions from the year-long test show the demand side response to multi-zone tariffs – i.e. the maximum temporary percentage reduction of energy consumption in the time zone with the tariff raised by a min. of 80% – stays within the 5–15% range. In the case of power reduction (the maximum temporary reduction of energy consumption in the time zone when the power available to a household is limited to 1 kW – the demand side response stays within the 10–30% range. An additional effect of tariff diversification and smart metering is a reduction in electricity consumption by 1–4% on working days (i.e. this is the effect of either the consumption reduction or shifting it to weekends. During the test energy consumers were subjected to both price incentives and education. Due to the fact that it is difficult to separate the effects of education and tariff structures, the company plans to continue the research related to verifying the effectiveness of individual activation tools in reducing electricity consumption by households.

Relationship between power resources and organizational culture in ...

African Journals Online (AJOL)

This study intended to survey the relationship between power resource and organizational culture in Aras Free Zone. Statistical population consisted of all employees of Aras Free Zone (N=950). Samples population is selected using simple randomly method and Morghan table (n= 275). Methodology of this study is allied ...

Analysis of the heat affected zone in CO2 laser cutting of stainless steel

Directory of Open Access Journals (Sweden)

Madić Miloš J.

2012-01-01

Full Text Available This paper presents an investigation into the effect of the laser cutting parameters on the heat affected zone in CO2 laser cutting of AISI 304 stainless steel. The mathematical model for the heat affected zone was expressed as a function of the laser cutting parameters such as the laser power, cutting speed, assist gas pressure and focus position using the artificial neural network. To obtain experimental database for the artificial neural network training, laser cutting experiment was planned as per Taguchi’s L27 orthogonal array with three levels for each of the cutting parameter. Using the 27 experimental data sets, the artificial neural network was trained with gradient descent with momentum algorithm and the average absolute percentage error was 2.33%. The testing accuracy was then verified with 6 extra experimental data sets and the average predicting error was 6.46%. Statistically assessed as adequate, the artificial neural network model was then used to investigate the effect of the laser cutting parameters on the heat affected zone. To analyze the main and interaction effect of the laser cutting parameters on the heat affected zone, 2-D and 3-D plots were generated. The analysis revealed that the cutting speed had maximum influence on the heat affected zone followed by the laser power, focus position and assist gas pressure. Finally, using the Monte Carlo method the optimal laser cutting parameter values that minimize the heat affected zone were identified.

Forward Field Computation with OpenMEEG

Directory of Open Access Journals (Sweden)

Alexandre Gramfort

2011-01-01

must be computed. We present OpenMEEG, which solves the electromagnetic forward problem in the quasistatic regime, for head models with piecewise constant conductivity. The core of OpenMEEG consists of the symmetric Boundary Element Method, which is based on an extended Green Representation theorem. OpenMEEG is able to provide lead fields for four different electromagnetic forward problems: Electroencephalography (EEG, Magnetoencephalography (MEG, Electrical Impedance Tomography (EIT, and intracranial electric potentials (IPs. OpenMEEG is open source and multiplatform. It can be used from Python and Matlab in conjunction with toolboxes that solve the inverse problem; its integration within FieldTrip is operational since release 2.0.

Gender differences in variability patterns of forward bending

DEFF Research Database (Denmark)

Villumsen, Morten; Madeleine, Pascal; Jørgensen, Marie Birk

2016-01-01

The variability pattern is highly relevant in the analysis of occupational physical exposures. It is hypothesized that gender differences exist in the variability pattern of forward bending between work and leisure.......The variability pattern is highly relevant in the analysis of occupational physical exposures. It is hypothesized that gender differences exist in the variability pattern of forward bending between work and leisure....

Fine-Grained Forward-Secure Signature Schemes without Random Oracles

DEFF Research Database (Denmark)

Camenisch, Jan; Koprowski, Maciej

2006-01-01

We propose the concept of fine-grained forward-secure signature schemes. Such signature schemes not only provide nonrepudiation w.r.t. past time periods the way ordinary forward-secure signature schemes do but, in addition, allow the signer to specify which signatures of the current time period...... remain valid when revoking the public key. This is an important advantage if the signer produces many signatures per time period as otherwise the signer would have to re-issue those signatures (and possibly re-negotiate the respective messages) with a new key.Apart from a formal model for fine......-grained forward-secure signature schemes, we present practical schemes and prove them secure under the strong RSA assumption only, i.e., we do not resort to the random oracle model to prove security. As a side-result, we provide an ordinary forward-secure scheme whose key-update time is significantly smaller than...

Simulating stakeholder behavior in a marine setting: Integrated coastal zone planning and the influential power of selected stakeholders in Frøya, Norway

Directory of Open Access Journals (Sweden)

Rachel Gjelsvik Tiller

2015-11-01

Full Text Available Aquaculture expansion is a political priority in Norway, despite simmering conflicts and competing claims. We expand on this hypothesis and analyze the Norwegian governance system by adding stakeholder theory in case of a simulated model of the effects of municipal coastal zone planning in the municipality of Frøya, Norway. One cannot analyze the governance system in Norway without fully comprehending the perspectives of the stakeholders involved. Different stakeholders will react and respond differently and have conflicting presumptions basing their actions towards the planning process for coastal areas. They will also have different levels of power and abilities to influence the system. The article presents the interdisciplinary, first generation development of an agent based simulation model that mimics the outcomes of coastal zone planning for a stakeholder groups, the commercial fishers and the aquaculture industry, based on qualitative input from legislation, regulations and stakeholder workshops. We proceed with verifying the applicability of this simulator in light of the key actors involved, namely the commercial fishers. We found that the simulator had two outcomes for the commercial fishers that were consistently recurring, namely collapse and stability, based on the simulated occurrences of complaints by the stakeholders, with the latter being the de facto perceptions of actuality by the commercial fishers. Using stakeholder theory, we argue that the aquaculture industry’s role has the saliency of an Important Stakeholder in Frøya has steered the commercial fishers, who has the role of Dependent Stakeholders according to stakeholder theory, to no longer see any legitimacy in the process in that their complaints were never upheld because of their lack of the attribute Power.

Radiation protection zoning

International Nuclear Information System (INIS)

2015-01-01

Radiation being not visible, the zoning of an area containing radioactive sources is important in terms of safety. Concerning radiation protection, 2 work zones are defined by regulations: the monitored zone and the controlled zone. The ministerial order of 15 may 2006 settles the frontier between the 2 zones in terms of radiation dose rates, the rules for access and the safety standards in both zones. Radioprotection rules and the name of the person responsible for radiation protection must be displayed. The frontier between the 2 zones must be materialized and marked with adequate equipment (specific danger signs and tapes). Both zones are submitted to selective entrance, the access for the controlled zone is limited because of the radiation risk and of the necessity of confining radioactive contamination while the limitation of the access to the monitored zone is due to radiation risk only. (A.C.)

Bulk material management mode of general contractors in nuclear power project

International Nuclear Information System (INIS)

Zhang Jinyong; Zhao Xiaobo

2011-01-01

The paper introduces the characteristics of bulk material management mode in construction project, and the advantages and disadvantages of bulk material management mode of general contractors in nuclear power project. In combination with the bulk material management mode of China Nuclear Power Engineering Co., Ltd, some improvement measures have been put forward as well. (authors)

An Optimization Scheduling Model for Wind Power and Thermal Power with Energy Storage System considering Carbon Emission Trading

Directory of Open Access Journals (Sweden)

Huan-huan Li

2015-01-01

Full Text Available Wind power has the characteristics of randomness and intermittence, which influences power system safety and stable operation. To alleviate the effect of wind power grid connection and improve power system’s wind power consumptive capability, this paper took emission trading and energy storage system into consideration and built an optimization model for thermal-wind power system and energy storage systems collaborative scheduling. A simulation based on 10 thermal units and wind farms with 2800 MW installed capacity verified the correctness of the models put forward by this paper. According to the simulation results, the introduction of carbon emission trading can improve wind power consumptive capability and cut down the average coal consumption per unit of power. The introduction of energy storage system can smooth wind power output curve and suppress power fluctuations. The optimization effects achieve the best when both of carbon emission trading and energy storage system work at the same time.

Comparing Effects of TCR and TSC on MHO Distance Protection Setting in 400 kV Algerian Transmission Line

Directory of Open Access Journals (Sweden)

Mohamed ZELLAGUI

2012-11-01

Full Text Available This paper presents a study on the performances of distance relays setting in 400 kV in Eastern Algerian transmission networks at Sonelgaz Group (Algerian company of Electrical and Gas compensated by shunt Flexible AC Transmission System (FACTS. The facts are used for controlling transmission voltage, power flow, reactive power, and damping of power system oscillations in high power transfer levels. The effects of SVC devices i.e. Thyristor Controlled Reactor (TCR and the Thyristor Switched Capacitors (TSC insertion, on the total impedance of a transmission line protected by MHO distance relay are investigated. The modified setting zones protections for three forward zones (Z1, Z2 and Z3 have been calculated in order to improve the performances of distance relay protection and prevent circuit breaker nuisance tripping.

Hydroelectric power in Switzerland: large growth potential by increasing the installed power

International Nuclear Information System (INIS)

Schleiss, A.

2007-01-01

Due to its important hydroelectric power generation facilities (about 525 plants with a total power of 13,314 MW producing about 35.3 TWh annually) Switzerland plays an important role in the interconnected European power system. Large artificial storage lakes in the Swiss Alps can generate peak power during hours of highest demand: 9700 MW are available from accumulated energy and the total power of pumped-storage facilities amounts to 1700 MW. The latter allow refilling the reservoirs at periods of low power demand and generating power at periods of peak demand. In the case of favorable conditions, the yearly average power production could be increased by 6% and the production during the winter period (October to March) by 20% by the year 2020. However, looking forward to the year 2050, the annual production is expected to decrease by 3% despite a possible extension of hydropower. This decrease is due to the enforcement of the minimum residual water flow rates required by a new legislation to protect the rivers. The enforcement is due at latest when the present licenses for water utilization expire. On the other hand, the installed (peak) power might be further increased by 50% by retrofitting the existing installations and constructing the pumped-storage plants currently at the planning stage

Nuclear power--the hope of green economy

International Nuclear Information System (INIS)

Tian Jiashu; Wang Chuang

2010-01-01

The thesis introduces the current situation of nuclear power development and developed countries' attitude towards nuclear power as the demand for energy consumption is continuously increasing with the global economic and social development and the green house gas emission leads to global warming. By comparison of the impact to the environment and the generating cost between thermal power and nuclear power, it is of great significance to strengthen nuclear power development to carry out international cooperation on low-carbon economy and to enhance self-innovation for developing the green economy and dealing with climate change. Based on the analysis of nuclear industry development in China, the Mid-Long Term Development Plan for Nuclear Power has been set up, and challenges and objectives of nuclear and radiation safety regulation have been brought forward. (authors)

Without nuclear power

International Nuclear Information System (INIS)

1987-01-01

The arguments put forward by the SPD point to the following: Backing out of nuclear power is a must, because of the awful quality of the hazards involved; because there can be no real separation guaranteed between civil and military utilisation of nuclear energy; for reasons of international responsibility; because we must not pass the buck on to the next generation; because social compatibility must be achieved; because the story of the 'cheap' nuclear generation of electricity is a fairy tale; because nuclear power pushes back coal as an energy source; because current ecological conditions call for abandonment of nuclear power, and economic arguments do not really contradict them. A reform of our energy system has to fulfill four requirements: Conserve energy; reduce and avoid environmental pollution; use renewable energy sources as the main sources; leave to the next generation the chance of choosing their own way of life. (HSCH) [de

The level of air pollution in the impact zone of coal-fired power plant (Karaganda City) using the data of geochemical snow survey (Republic of Kazakhstan)

Science.gov (United States)

Adil'bayeva, T. E.; Talovskaya, A. V.; Yazikov, Ye G.; Matveenko, I. A.

2016-09-01

Coal-fired power plants emissions impact the air quality and human health. Of great significance is assessment of solid airborne particles emissions from those plants and distance of their transportation. The article presents the results of air pollution assessment in the zone of coal-fired power plant (Karaganda City) using snow survey. Based on the mass of solid airborne particles deposited in snow, time of their deposition on snow at the distance from 0.5 to 4.5 km a value of dust load has been determined. It is stated that very high level of pollution is observed at the distance from 0.5 to 1 km. there is a trend in decrease of dust burden value with the distance from the stacks of coal-fired power plant that may be conditioned by the particle size and washing out smaller ash particles by ice pellets forming at freezing water vapour in stacks of the coal-fired power plant. Study in composition of solid airborne particles deposited in snow has shown that they mainly contain particulates of underburnt coal, Al-Si- rich spheres, Fe-rich spheres, and coal dust. The content of the particles in samples decreases with the distance from the stacks of the coal-fired power plant.

System approach for evaluation of soil contamination by nitrogen containing pollutants in the 30-km zone power nuclear plant

International Nuclear Information System (INIS)

Shevtsova, O.V.; Zhigunova, L.N.; Makovskaya, N.A.; Pavlovich, E.L.

2013-01-01

This article presents the results of studies of the nitrogen-containing chemical pollutants of the soil 30 km zone nuclear power plant in order to evaluate the chemical carcinogenic risk to public health. As a result of this work the least amount of NDMA fixed at 0,83 × 10 -4 mg/kg, the highest - 128,29 × 10 -4 mg/kg, which is 0,83 and 128,3 %, respectively, of Madman established in the Russian Federation and Republic of Kazakhstan, the content of NDMA precursors - nitrite ions varies from 0,07 to 4,43 mg/kg. Found that most of the compounds reported in agricultural land. Calculate the total carcinogenic risk for the population living in the region - the set value corresponds to the maximum risk tolerance, i. e. the upper limit of acceptable risk. These levels are subject to continuous monitoring. (authors)

The subject deserving wide attention for nuclear power plant siting and environmental impact assessment

International Nuclear Information System (INIS)

Li Yong; Li Wenhui; Zhang Lingyan

2009-01-01

Based on siting work of nuclear power plant, the characteristics of nuclear power plant site selection and environmental impact assessment are analysed in accordance with laws and regulations of nuclear safety and environmental protection. Some subjects deserving attentions are put forward. (authors)

Application of a High-Power Reversible Converter in a Hybrid Traction Power Supply System

Directory of Open Access Journals (Sweden)

Gang Zhang

2017-03-01

Full Text Available A high-power reversible converter can achieve a variety of functions, such as recovering regenerative braking energy, expanding traction power capacity, and improving an alternating current (AC grid power factor. A new hybrid traction power supply scheme, which consists of a high-power reversible converter and two 12-pulse diode rectifiers, is proposed. A droop control method based on load current feed-forward is adopted to realize the load distribution between the reversible converter and the existing 12-pulse diode rectifiers. The direct current (DC short-circuit characteristics of the reversible converter is studied, then the relationship between the peak fault current and the circuit parameters is obtained from theoretical calculations and validated by computer simulation. The first two sets of 2 MW reversible converters have been successfully applied in Beijing Metro Line 10, the proposed hybrid application scheme and coordinated control strategy are verified, and 11.15% of average energy-savings is reached.

A robust internet-based auction to procure electricity forwards

International Nuclear Information System (INIS)

Woo, C.K.; Lloyd, D.; Borden, M.; Warrington, R.; Baskette, C.

2004-01-01

Securing forward contracts to manage procurement-cost risk is an intuitively appealing and economically reasonable strategy for a load-serving local distribution company (LDC) in today's volatile electricity marketplace. However, knowing what to buy does not guarantee least-cost implementation. The forward-contract price quoted by a prospective seller may not be the 'best deal' that an LDC could have obtained, especially when the forward contract desired by the LDC is not actively traded. This paper reports the results from five internet-based auctions for electricity forward contracts with non-firm delivery and varying hourly quantities held monthly by a Florida municipal utility (MU) from September 2002 to January 2003. The results confirm that a multi-round auction design is robust in realizing competitive price offers made by credit-worthy sellers, time-efficient contracting, and consistent cost savings to the MU. Thus, the Anglo-Dutch auction described herein is a reasonable substitute for generation ownership by an LDC. (author)

Simulating Dynamic Fracture in Oxide Fuel Pellets Using Cohesive Zone Models

Energy Technology Data Exchange (ETDEWEB)

R. L. Williamson

2009-08-01

It is well known that oxide fuels crack during the first rise to power, with continued fracture occurring during steady operation and especially during power ramps or accidental transients. Fractures have a very strong influence on the stress state in the fuel which, in turn, drives critical phenomena such as fission gas release, fuel creep, and eventual fuel/clad mechanical interaction. Recently, interest has been expressed in discrete fracture methods, such as the cohesive zone approach. Such models are attractive from a mechanistic and physical standpoint, since they reflect the localized nature of cracking. The precise locations where fractures initiate, as well as the crack evolution characteristics, are determined as part of the solution. This paper explores the use of finite element cohesive zone concepts to predict dynamic crack behavior in oxide fuel pellets during power-up, steady operation, and power ramping. The aim of this work is first to provide an assessment of cohesive zone models for application to fuel cracking and explore important numerical issues associated with this fracture approach. A further objective is to provide basic insight into where and when cracks form, how they interact, and how cracking effects the stress field in a fuel pellet. The ABAQUS commercial finite element code, which includes powerful cohesive zone capabilities, was used for this study. Fully-coupled thermo-mechanical behavior is employed, including the effects of thermal expansion, swelling due to solid and gaseous fission products, and thermal creep. Crack initiation is determined by a temperature-dependent maximum stress criterion, based on measured fracture strengths for UO2. Damage evolution is governed by a traction-separation relation, calibrated to data from temperature and burn-up dependent fracture toughness measurements. Numerical models are first developed in 2D based on both axisymmetric (to explore axial cracking) and plane strain (to explore radial

Probabilistic forward model for electroencephalography source analysis

International Nuclear Information System (INIS)

Plis, Sergey M; George, John S; Jun, Sung C; Ranken, Doug M; Volegov, Petr L; Schmidt, David M

2007-01-01

Source localization by electroencephalography (EEG) requires an accurate model of head geometry and tissue conductivity. The estimation of source time courses from EEG or from EEG in conjunction with magnetoencephalography (MEG) requires a forward model consistent with true activity for the best outcome. Although MRI provides an excellent description of soft tissue anatomy, a high resolution model of the skull (the dominant resistive component of the head) requires CT, which is not justified for routine physiological studies. Although a number of techniques have been employed to estimate tissue conductivity, no present techniques provide the noninvasive 3D tomographic mapping of conductivity that would be desirable. We introduce a formalism for probabilistic forward modeling that allows the propagation of uncertainties in model parameters into possible errors in source localization. We consider uncertainties in the conductivity profile of the skull, but the approach is general and can be extended to other kinds of uncertainties in the forward model. We and others have previously suggested the possibility of extracting conductivity of the skull from measured electroencephalography data by simultaneously optimizing over dipole parameters and the conductivity values required by the forward model. Using Cramer-Rao bounds, we demonstrate that this approach does not improve localization results nor does it produce reliable conductivity estimates. We conclude that the conductivity of the skull has to be either accurately measured by an independent technique, or that the uncertainties in the conductivity values should be reflected in uncertainty in the source location estimates

LIDAR Wind Speed Measurement Analysis and Feed-Forward Blade Pitch Control for Load Mitigation in Wind Turbines: January 2010--January 2011

Energy Technology Data Exchange (ETDEWEB)

Dunne, F.; Simley, E.; Pao, L.Y.

2011-10-01

This report examines the accuracy of measurements that rely on Doppler LIDAR systems to determine their applicability to wind turbine feed-forward control systems and discusses feed-forward control system designs that use preview wind measurements. Light Detection and Ranging (LIDAR) systems are able to measure the speed of incoming wind before it interacts with a wind turbine rotor. These preview wind measurements can be used in feed-forward control systems designed to reduce turbine loads. However, the degree to which such preview-based control techniques can reduce loads by reacting to turbulence depends on how accurately the incoming wind field can be measured. The first half of this report examines the accuracy of different measurement scenarios that rely on coherent continuous-wave or pulsed Doppler LIDAR systems to determine their applicability to feed-forward control. In particular, the impacts of measurement range and angular offset from the wind direction are studied for various wind conditions. A realistic case involving a scanning LIDAR unit mounted in the spinner of a wind turbine is studied in depth with emphasis on choices for scan radius and preview distance. The effects of turbulence parameters on measurement accuracy are studied as well. Continuous-wave and pulsed LIDAR models based on typical commercially available units were used in the studies present in this report. The second half of this report discusses feed-forward control system designs that use preview wind measurements. Combined feedback/feed-forward blade pitch control is compared to industry standard feedback control when simulated in realistic turbulent above-rated winds. The feed-forward controllers are designed to reduce fatigue loads, increasing turbine lifetime and therefore reducing the cost of energy. Three feed-forward designs are studied: non-causal series expansion, Preview Control, and optimized FIR filter. The input to the feed-forward controller is a measurement of

Imaging by forward propagating the data: Theory and application

KAUST Repository

Zuberi, Akbar

2013-02-27

The forward (modelled) wavefield for conventional reverse time migration (RTM) is computed by extrapolating the wavefield from an estimated source wavelet. In the typical case of a smooth subsurface velocity, this wavefield lacks the components, including surface reflections, necessary to image multiples in the observed data. We, instead, introduce the concept of forward propagating the recorded data, including direct arrivals, as part of RTM. We analyse the influence of the main components of the data on the imaging process, which include direct arrivals, primaries and surface-related multiples. In our RTM methodology, this implies correlating the forward extrapolated recorded data wavefield with its reversely extrapolated version prior to applying the zero-lag cross-correlation imaging condition. The interaction of the data components with each other in the cross-correlation process will image primaries and multiples, as well as introduce cross-talk artefact terms. However, some of these artefacts are present in conventional RTM implementation and they tend to be relatively weak. In fact, for the surface seismic experiment, forward propagating the direct arrivals is almost equivalent to forward propagating a source and it tends to contribute the majority of the data imaging energy. In addition, primaries and multiples recorded in the data become multiples of one higher order. Forward propagating the recorded data to recreate the source will relieve us from the requirement of estimating the source function. It will also include near-surface information necessary to improve the image in areas with near-surface complexity. Data from a simple synthetic layered model, as well as the Marmousi model, are used to demonstrate some of these features. © 2013 European Association of Geoscientists & Engineers.

Fuel conditioning facility zone-to-zone transfer administrative controls

International Nuclear Information System (INIS)

Pope, C. L.

2000-01-01

The administrative controls associated with transferring containers from one criticality hazard control zone to another in the Argonne National Laboratory (ANL) Fuel Conditioning Facility (FCF) are described. FCF, located at the ANL-West site near Idaho Falls, Idaho, is used to remotely process spent sodium bonded metallic fuel for disposition. The process involves nearly forty widely varying material forms and types, over fifty specific use container types, and over thirty distinct zones where work activities occur. During 1999, over five thousand transfers from one zone to another were conducted. Limits are placed on mass, material form and type, and container types for each zone. Ml material and containers are tracked using the Mass Tracking System (MTG). The MTG uses an Oracle database and numerous applications to manage the database. The database stores information specific to the process, including material composition and mass, container identification number and mass, transfer history, and the operators involved in each transfer. The process is controlled using written procedures which specify the zone, containers, and material involved in a task. Transferring a container from one zone to another is called a zone-to-zone transfer (ZZT). ZZTs consist of four distinct phases, select, request, identify, and completion

The forward Detectors of the ATLAS experiment

CERN Document Server

Vittori, Camilla; The ATLAS collaboration

2017-01-01

In this poster, a review of the ATLAS forward detectors operating in the 2015-2016 data taking is given. This includes a description of LUCID, the preferred ATLAS luminosity provider; of the ALFA detector, aimed to measure elastically scattered protons at small angle for the total proton-proton cross section measurement; of the ATLAS Forward Proton project AFP, which was partially installed and took the first data in 2015, and of the Zero Degree Calorimeter ZDC built for the ATLAS Heavy Ions physics program. The near future plans for these detectors will also be addressed.

Rate-Optimized Power Allocation for DF-Relayed OFDM Transmission under Sum and Individual Power Constraints

Directory of Open Access Journals (Sweden)

Vandendorpe Luc

2009-01-01

Full Text Available We consider an OFDM (orthogonal frequency division multiplexing point-to-point transmission scheme which is enhanced by means of a relay. Symbols sent by the source during a first time slot may be (but are not necessarily retransmitted by the relay during a second time slot. The relay is assumed to be of the DF (decode-and-forward type. For each relayed carrier, the destination implements maximum ratio combining. Two protocols are considered. Assuming perfect CSI (channel state information, the paper investigates the power allocation problem so as to maximize the rate offered by the scheme for two types of power constraints. Both cases of sum power constraint and individual power constraints at the source and at the relay are addressed. The theoretical analysis is illustrated through numerical results for the two protocols and both types of constraints.

The power grid monitoring promotion of Liaoning December 14th accident

Science.gov (United States)

Zhou, Zhi; Gao, Ziji; He, Xiaoyang; Li, Tie; Jin, Xiaoming; Wang, Mingkai; Qu, Zhi; Sun, Chenguang

2018-02-01

This paper introduces the main responsibilities of power grid monitoring and the accident of Liaoning Power Grid 500kV Xujia transformer substation at December 14th, 2016. This paper analyzes the problems exposed in this accident from the aspects of abnormal information judgment, fault information collection, auxiliary video monitoring, online monitoring of substation equipment, puts forward the corresponding improvement methods and summarizes the methods of improving the professional level of power grid equipment monitoring.

NPS ARIES Forward Look Sonar Integration

National Research Council Canada - National Science Library

Healey, A. J; Horner, D. P

2004-01-01

This work integrated an experimental Blazed Array Forward Looking Sonar (FLS) developed by the University of Washington, Applied Physics Laboratories into the ARIES autonomous underwater vehicle (AUV...

Feed-forward control of a solid oxide fuel cell system with anode offgas recycle

Science.gov (United States)

Carré, Maxime; Brandenburger, Ralf; Friede, Wolfgang; Lapicque, François; Limbeck, Uwe; da Silva, Pedro

2015-05-01

In this work a combined heat and power unit (CHP unit) based on the solid oxide fuel cell (SOFC) technology is analysed. This unit has a special feature: the anode offgas is partially recycled to the anode inlet. Thus it is possible to increase the electrical efficiency and the system can be operated without external water feeding. A feed-forward control concept which allows secure operating conditions of the CHP unit as well as a maximization of its electrical efficiency is introduced and validated experimentally. The control algorithm requires a limited number of measurement values and few deterministic relations for its description.

Failure mechanism analysis of a discrete 650V enhancement mode GaN-on-Si power device with reverse conduction accelerated power cycling test

DEFF Research Database (Denmark)

Song, Sungyoung; Munk-Nielsen, Stig; Uhrenfeldt, Christian

2017-01-01

A commercial discrete enhancement mode gallium nitride power component employing advanced package technology without conventional bond wire possesses the ability for bidirectional conduction. The gallium nitride power components can provide not only higher forward conductivity but also superior...... of cycles to failure. In physical failure analysis, delamination of a solder joint between a chip and a copper layer of an aluminum print circuit board is observed with a scanning acoustic microscope....

Molecular differences in transition zone and peripheral zone prostate tumors

Science.gov (United States)

Sinnott, Jennifer A.; Rider, Jennifer R.; Carlsson, Jessica; Gerke, Travis; Tyekucheva, Svitlana; Penney, Kathryn L.; Sesso, Howard D.; Loda, Massimo; Fall, Katja; Stampfer, Meir J.; Mucci, Lorelei A.; Pawitan, Yudi; Andersson, Sven-Olof; Andrén, Ove

2015-01-01

Prostate tumors arise primarily in the peripheral zone (PZ) of the prostate, but 20–30% arise in the transition zone (TZ). Zone of origin may have prognostic value or reflect distinct molecular subtypes; however, it can be difficult to determine in practice. Using whole-genome gene expression, we built a signature of zone using normal tissue from five individuals and found that it successfully classified nine tumors of known zone. Hypothesizing that this signature captures tumor zone of origin, we assessed its relationship with clinical factors among 369 tumors of unknown zone from radical prostatectomies (RPs) and found that tumors that molecularly resembled TZ tumors showed lower mortality (P = 0.09) that was explained by lower Gleason scores (P = 0.009). We further applied the signature to an earlier study of 88 RP and 333 transurethral resection of the prostate (TURP) tumor samples, also of unknown zone, with gene expression on ~6000 genes. We had observed previously substantial expression differences between RP and TURP specimens, and hypothesized that this might be because RPs capture primarily PZ tumors, whereas TURPs capture more TZ tumors. Our signature distinguished these two groups, with an area under the receiver operating characteristic curve of 87% (P zones. Zone of origin may be important to consider in prostate tumor biomarker research. PMID:25870172

Supplying the power requirements to a sensor network using radio frequency power transfer.

Science.gov (United States)

Percy, Steven; Knight, Chris; Cooray, Francis; Smart, Ken

2012-01-01

Wireless power transmission is a method of supplying power to small electronic devices when there is no wired connection. One way to increase the range of these systems is to use a directional transmitting antenna, the problem with this approach is that power can only be transmitted through a narrow beam and directly forward, requiring the transmitter to always be aligned with the sensor node position. The work outlined in this article describes the design and testing of an autonomous radio frequency power transfer system that is capable of rotating the base transmitter to track the position of sensor nodes and transferring power to that sensor node. The system's base station monitors the node's energy levels and forms a charge queue to plan charging order and maintain energy levels of the nodes. Results show a radio frequency harvesting circuit with a measured S11 value of -31.5 dB and a conversion efficiency of 39.1%. Simulation and experimentation verified the level of power transfer and efficiency. The results of this work show a small network of three nodes with different storage types powered by a central base node.

Supplying the Power Requirements to a Sensor Network Using Radio Frequency Power Transfer

Directory of Open Access Journals (Sweden)

Steven Percy

2012-06-01

Full Text Available Wireless power transmission is a method of supplying power to small electronic devices when there is no wired connection. One way to increase the range of these systems is to use a directional transmitting antenna, the problem with this approach is that power can only be transmitted through a narrow beam and directly forward, requiring the transmitter to always be aligned with the sensor node position. The work outlined in this article describes the design and testing of an autonomous radio frequency power transfer system that is capable of rotating the base transmitter to track the position of sensor nodes and transferring power to that sensor node. The system’s base station monitors the node’s energy levels and forms a charge queue to plan charging order and maintain energy levels of the nodes. Results show a radio frequency harvesting circuit with a measured S11 value of −31.5 dB and a conversion efficiency of 39.1%. Simulation and experimentation verified the level of power transfer and efficiency. The results of this work show a small network of three nodes with different storage types powered by a central base node.

Linear Processing Design of Amplify-and-Forward Relays for Maximizing the System Throughput

Directory of Open Access Journals (Sweden)

Qiang Wang

2018-01-01

Full Text Available In this paper, firstly, we study the linear processing of amplify-and-forward (AF relays for the multiple relays multiple users scenario. We regard all relays as one special “relay”, and then the subcarrier pairing, relay selection and channel assignment can be seen as a linear processing of the special “relay”. Under fixed power allocation, the linear processing of AF relays can be regarded as a permutation matrix. Employing the partitioned matrix, we propose an optimal linear processing design for AF relays to find the optimal permutation matrix based on the sorting of the received SNR over the subcarriers from BS to relays and from relays to users, respectively. Then, we prove the optimality of the proposed linear processing scheme. Through the proposed linear processing scheme, we can obtain the optimal subcarrier paring, relay selection and channel assignment under given power allocation in polynomial time. Finally, we propose an iterative algorithm based on the proposed linear processing scheme and Lagrange dual domain method to jointly optimize the joint optimization problem involving the subcarrier paring, relay selection, channel assignment and power allocation. Simulation results illustrate that the proposed algorithm can achieve a perfect performance.

Seismological investigation of earthquakes in the New Madrid Seismic Zone

International Nuclear Information System (INIS)

Herrmann, R.B.; Nguyen, B.

1993-08-01

Earthquake activity in the New Madrid Seismic Zone had been monitored by regional seismic networks since 1975. During this time period, over 3,700 earthquakes have been located within the region bounded by latitudes 35 degrees--39 degrees N and longitudes 87 degrees--92 degrees W. Most of these earthquakes occur within a 1.5 degrees x 2 degrees zone centered on the Missouri Bootheel. Source parameters of larger earthquakes in the zone and in eastern North America are determined using surface-wave spectral amplitudes and broadband waveforms for the purpose of determining the focal mechanism, source depth and seismic moment. Waveform modeling of broadband data is shown to be a powerful tool in defining these source parameters when used complementary with regional seismic network data, and in addition, in verifying the correctness of previously published focal mechanism solutions

Physics and nuclear power

International Nuclear Information System (INIS)

Buttery, N E

2008-01-01

Nuclear power owes its origin to physicists. Fission was demonstrated by physicists and chemists and the first nuclear reactor project was led by physicists. However as nuclear power was harnessed to produce electricity the role of the engineer became stronger. Modern nuclear power reactors bring together the skills of physicists, chemists, chemical engineers, electrical engineers, mechanical engineers and civil engineers. The paper illustrates this by considering the Sizewell B project and the role played by physicists in this. This covers not only the roles in design and analysis but in problem solving during the commissioning of first of a kind plant. Looking forward to the challenges to provide sustainable and environmentally acceptable energy sources for the future illustrates the need for a continuing synergy between physics and engineering. This will be discussed in the context of the challenges posed by Generation IV reactors

Nuclear power and ethics

International Nuclear Information System (INIS)

Schwery, H.

1998-01-01

The author can see no sense in demanding an ethical regime to be applied exclusively to nuclear power but rather calls for an approach that discusses nuclear power as one constituent of the complex energy issue in a way spanning all dimensions involved, as e.g. the technological, economic, cultural, humanitarian, and humanistic aspects. An ethical approach does not question scientific research, or science or technology, but examines their relation to man and the future of humanity, so that an ethical approach will first of all demand that society will bring forward conscientious experts as reliable partners in the process of discussing the ethical implications of progress and development in a higly industrialised civilisation. (orig./CB) [de

Efficient Vector-Based Forwarding for Underwater Sensor Networks

Directory of Open Access Journals (Sweden)

Peng Xie

2010-01-01

Full Text Available Underwater Sensor Networks (UWSNs are significantly different from terrestrial sensor networks in the following aspects: low bandwidth, high latency, node mobility, high error probability, and 3-dimensional space. These new features bring many challenges to the network protocol design of UWSNs. In this paper, we tackle one fundamental problem in UWSNs: robust, scalable, and energy efficient routing. We propose vector-based forwarding (VBF, a geographic routing protocol. In VBF, the forwarding path is guided by a vector from the source to the target, no state information is required on the sensor nodes, and only a small fraction of the nodes is involved in routing. To improve the robustness, packets are forwarded in redundant and interleaved paths. Further, a localized and distributed self-adaptation algorithm allows the nodes to reduce energy consumption by discarding redundant packets. VBF performs well in dense networks. For sparse networks, we propose a hop-by-hop vector-based forwarding (HH-VBF protocol, which adapts the vector-based approach at every hop. We evaluate the performance of VBF and HH-VBF through extensive simulations. The simulation results show that VBF achieves high packet delivery ratio and energy efficiency in dense networks and HH-VBF has high packet delivery ratio even in sparse networks.

Magnetic Field Emissions for Ferrite and Non-Ferrite Geometries for Wireless Power Transfer to Vehicles

DEFF Research Database (Denmark)

Batra, Tushar; Schaltz, Erik

2014-01-01

Minimizing magnetic field emissions to surroundings is one of the most challenging design criteria for wireless power transfer to vehicles. In this paper, concept of division of the emissions into three zones (primary, secondary, and combined zone) in the vertical direction is introduced. For geo......Minimizing magnetic field emissions to surroundings is one of the most challenging design criteria for wireless power transfer to vehicles. In this paper, concept of division of the emissions into three zones (primary, secondary, and combined zone) in the vertical direction is introduced...... for vertical separation between the coils in range of 100-180 mm. It is observed that lower vertical separation results in higher overlapping of the zones and the coils behave as they are effectively placed close to center of air gap. The analysis in this work provides a better understanding of the space...... profile of magnetic field emissions (with and without ferrite) for wireless power transfer to vehicles....

A Study on Establishment of Buffer Zone of Radioactive Waste Repository

International Nuclear Information System (INIS)

Yoon, Jeong Hyoun; Park, Joo Wan; Ju, Min Su; Kim, Chang Lak; Park, Jin Baek

2008-01-01

A new proposed repository has a final capacity of 800,000 drums radioactive waste. Most of foreign repositories have a general practice of segregating control zones which mainly contributes to classification of degree of control, whether it is called buffer zone or not. Domestic regulatory requirements of establishment of buffer zone in a repository are not much different from those of nuclear power plants for operation period, in which satisfactory design objective or performance objective is the most important factor in determination of the buffer zone. The meaning of buffer zone after closure is a minimum requested area which can prevent inadvertent intruders from leading to non-allowable exposure during institutional control period. Safety assessment with drinking well scenario giving rise to the highest probability of exposure among the intruder's actions can verify fulfillment of the buffer zone which is determined by operational safety of the repository. At present. for the repository to be constructed in a few years, the same procedure and concept as described in this paper are applied that can satisfy regulatory requirements and radiological safety as well. However, the capacity of the repository will be stepwise extended upto 800,000 drums, consequently its layout will be varied too. Timely considerations will be necessary for current boundary of the buffer zone which has been established on the basis of 100,000 drums disposal.

Arbitrage free pricing of forward and futures in the energy market

International Nuclear Information System (INIS)

Kloster, Kristian

2003-01-01

This thesis will describe a method for an arbitrage-free evaluation of forward and futures contracts in the Nordic electricity market. This is a market where it is not possible to hedge using the underlying asset which one normally would do. The electricity market is a relatively new market, and is less developed than the financial markets. The pricing of energy and energy derivatives are depending on factors like production, transport, storage etc. There are different approaches when pricing a forward contract in an energy market. With motivation from interest rate theory, one could model the forward prices directly in the risk neutral world. Another approach is to start out with a model for the spot prices in the physical world, and then derive theoretical forward prices, which then are fitted to observed forward prices. These and other approaches are described by Clewlow and Strickland in their book, Energy derivatives. This thesis uses the approach where I start out with a model for the spot price, and then derive theoretical forward prices. I use a generalization of the multifactor Schwartz model with seasonal trends and Ornstein Uhlenbeck processes to model the spot prices for electricity. This continuous-time model also incorporates mean-reversion, which is an important aspect of energy prices. Historical data for the spot prices is used to estimate my variables in the multi-factor Schwartz model. Then one can specify arbitrage-free prices for forward and futures based on the Schwartz model. The result from this procedure is a joint spot and forward price model in both the risk neutral and physical market, together with knowledge of the equivalent martingale measure chosen by the market. This measure can be interpreted as the market price of risk, which is of interest for risk management. In this setup both futures and forward contracts will have the same pricing dynamics, as the only difference between the two types of contracts is how the payment for the