78 FR 12042 - Electric Grid Integration Technical Workshops

Science.gov (United States)

2013-02-21

... DEPARTMENT OF ENERGY Electric Grid Integration Technical Workshops AGENCY: Grid Tech Team, U.S. Department of Energy. ACTION: Notice of availability; request for comments. SUMMARY: Notice is hereby given that two documents are publicly available and the Department of Energy is requesting public comments...

US Department of Energy Plutonium Stabilization and Immobilization Workshop, December 12-14, 1995: Final proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-05-01

The purpose of the workshop was to foster communication within the technical community on issues surrounding stabilization and immobilization of the Department`s surplus plutonium and plutonium- contaminated wastes. The workshop`s objectives were to: build a common understanding of the performance, economics and maturity of stabilization and immobilization technologies; provide a system perspective on stabilization and immobilization technology options; and address the technical issues associated with technologies for stabilization and immobilization of surplus plutonium and plutonium- contaminated waste. The papers presented during this workshop have been indexed separately.

Nuclear Energy Innovation Workshops. Executive Summary

Energy Technology Data Exchange (ETDEWEB)

Allen, Todd [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jackson, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Phil [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-06-01

The nuclear energy innovation workshops were organized and conducted by INL on March 2-4, 2015 at the five NUC universities and Boise State University. The output from these workshops is summarized with particular attention to final summaries that were provided by technical leads at each of the workshops. The current revision includes 3-4 punctuation corrections and a correction of the month of release from May to June.

Diabetic foot workshop: Improving technical and educational skills for nurses.

Science.gov (United States)

Aalaa, Maryam; Sanjari, Mahnaz; Shahbazi, Samimeh; Shayeganmehr, Zahra; Abooeirad, Maryam; Amini, Mohammad Reza; Adibi, Hossien; Mehrdad, Neda

2017-01-01

Diabetes mellitus as one of the most common metabolic disorders has some complications, one of the main ones is diabetic foot (DF). Appropriate care and education prevents 85% of diabetic foot amputations. An ideal management to prevent and treat diabetic foot necessitates a close collaboration between the health team members and the diabetic patient. Therefore, improving nurses' knowledge about DF care and advancement in the quality of care provided by the nurses could significantly improve diabetic foot prevention and management. Therefore, the aim of DF workshop was to improve technical and educational skills of the nurses to prevent and manage diabetic foot. Considering the vital role of the nurses in providing DF care, EMRI decided to conduct Diabetic foot workshop for them. The following five steps were designed for the 14 coordinating sessions in the workshop: Goals definition, deciding about attendees, location selection, creating agenda, and developing a follow-up plan. "Diabetic Foot Workshop for Nurses" provides appropriate training to DF nurses at the national level; and combining theory and practice in this workshop not only increases nurses' knowledge, but also improves their skills in the field of the diabetic foot. Providing education and care to patients by DF nurse specialists instead of general nurses could be an important output of this workshop, which may lead to DF prevention and amputation decrease in the long term.

State-Level Workshops on Ethanol for Transportation: Final Report

Energy Technology Data Exchange (ETDEWEB)

Graf, A.

2004-01-01

Final report on subcontract for holding four state-level workshops (Hawaii, Kentucky, Nevada, California) to facilitate development of ethanol production facilities in those states. In 2002/2003, under contract to the National Renewable Energy Laboratory, BBI International conducted state-level workshops ethanol in Hawaii, Nevada, Kentucky and California. These four workshops followed over 30 other workshops previous held under the Ethanol Workshop Series program sponsored by the U.S. Department of Energy. Two other workshops were conducted by BBI International during 2003, Oklahoma and Kansas, under contract to the Western Regional Biomass Energy Program. The Ethanol Workshop Series (EWS) was intended to provide a forum for interest groups to gather and discuss what needs to be accomplished to facilitate ethanol production in-state using local biomass resources. In addition, the EWS was to provide a promotional and educational forum for policy makers, community leaders, media and potential stakeholders. It was recognized that to eventually achieve biomass-ethanol production, it was necessary to support grain-ethanol production as a bridge. The long-term goal of the Workshops was to facilitate the development of biomass ethanol plants at a state-level. The near-term goal was to provide correct and positive information for education, promotion, production and use of fuel ethanol. The EWS drew from 65 to over 200 attendees and were deemed by the local organizers to have served the objectives set out by the U.S. Department of Energy.

Workshop on Women of Applied Mathematics: Research and Leadership

Energy Technology Data Exchange (ETDEWEB)

Dianne P. O' Leary; Tamara G. Kolda

2004-09-28

We held a two and a half day workshop on Women of Applied Mathematics: Research and Leadership at the University of Maryland in College Park, Maryland, October 8--10, 2003. The workshop provided a technical and professional forum for eleven senior women and twenty-four early-career women in applied mathematics. Each participant committed to an outreach activity and publication of a report on the workshop's web site. The final session of the workshop produced recommendations for future action.

BrainMap '95 workshop. Final report

International Nuclear Information System (INIS)

1995-01-01

The fourth annual BrainMap workshop was held at La Mansion del Rio Hotel in San Antonio December 3--4, 1995. The conference title was ''Human Brain Mapping and Modeling.'' The meeting was attended by 137 registered participants and 30 observers from 82 institutions representing 12 countries. The meeting focused on the technical issues associated with brain mapping and modeling. A total of 23 papers were presented covering the following topics: spatial normalization and registration; functional image analysis; metanalysis and modeling; and new horizons in biological databases. The full program with abstracts was available on the Research Imaging Center's web site. A book will be published by John Wiley and Sons prior to the end of 1998

Mentoring disadvantaged nursing students through technical writing workshops.

Science.gov (United States)

Johnson, Molly K; Symes, Lene; Bernard, Lillian; Landson, Margie J; Carroll, Theresa L

2007-01-01

Recent studies have identified a problematic gap for nursing students between terse clinical writing and formal academic writing. This gap can create a potential barrier to academic and workplace success, especially for disadvantaged nursing students who have not acquired the disciplinary conventions and sophisticated writing required in upper-level nursing courses. The authors demonstrate the need for writing-in-the-discipline activities to enhance the writing skills of nursing students, describe the technical writing workshops they developed to mentor minority and disadvantaged nursing students, and provide recommendations to stimulate educator dialogue across disciplines and institutions.

USACM Thematic Workshop On Uncertainty Quantification And Data-Driven Modeling.

Energy Technology Data Exchange (ETDEWEB)

Stewart, James R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

The USACM Thematic Workshop on Uncertainty Quantification and Data-Driven Modeling was held on March 23-24, 2017, in Austin, TX. The organizers of the technical program were James R. Stewart of Sandia National Laboratories and Krishna Garikipati of University of Michigan. The administrative organizer was Ruth Hengst, who serves as Program Coordinator for the USACM. The organization of this workshop was coordinated through the USACM Technical Thrust Area on Uncertainty Quantification and Probabilistic Analysis. The workshop website (http://uqpm2017.usacm.org) includes the presentation agenda as well as links to several of the presentation slides (permission to access the presentations was granted by each of those speakers, respectively). Herein, this final report contains the complete workshop program that includes the presentation agenda, the presentation abstracts, and the list of posters.

Proceedings: EPRI Workshop 2 -- Technical basis for EPA HLW disposal criteria

International Nuclear Information System (INIS)

Rogers, V.

1993-03-01

The Electric Power Research Institute (EPRI) sponsored this workshop to address the scientific and technical issues underlying the regulatory criteria, or standard, for the disposal of spent nuclear fuel, high-level radioactive waste, and transuranic waste, commonly referred to collectively as high-level waste (HLW). These regulatory criteria were originally promulgated by the US Environmental Protection Agency (EPA) in 40 CFR Part 191 in 1985. However, significant portions of the regulation were remanded by the Ninth Circuit Court of Appeals in 1987. This is the second of two workshops. Topics discussed include: gas pathway; individual and groundwater protection; human intrusion; population protection; performance; TRU conversion factors and discussions. Individual projects re processed separately for the databases

Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

John Ross

2003-04-30

The Final Technical Report summarizes research accomplishments and Publications in the period of 5/1/99 to 4/30/03 done on the grant. Extensive progress was made in the period covered by this report in the areas of chemical kinetics of non-linear systems; spatial structures, reaction - diffusion systems, and thermodynamic and stochastic theory of electrochemical and general systems.

An educational structure Practice Workshop Class in Vocational Technical Education

Directory of Open Access Journals (Sweden)

Juan Moreno Martín

2005-12-01

Full Text Available This article presents a didactic structure for the Workshop, Practical Class, as a fundamental organizational form of the Professional Pedago gical Process in the Technical Science Faculty. It is our  intention to come to an agreement among the professo rs who teach this type of subject, so that their incidence is positive, in their self-preparation as well as in the result expected from the students, in the development of their abilities.

Employability and Technical Skill Required to Establish a Small Scale Automobile Workshop

Science.gov (United States)

Olaitan, Olawale O.; Ikeh, Joshua O.

2015-01-01

The study focused on identifying the employability and technical skills needed to establish small-scale automobile workshop in Nsukka Urban of Enugu State. Five purposes of the study were stated to guide the study. Five research questions were stated and answered in line with the purpose of the study. The population for the study is 1,500…

Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop

Energy Technology Data Exchange (ETDEWEB)

Musial, W.; Lawson, M.; Rooney, S.

2013-02-01

The Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop was hosted by the National Renewable Energy Laboratory (NREL) in Broomfield, Colorado, July 9-10, 2012. The workshop brought together over 60 experts in marine energy technologies to disseminate technical information to the marine energy community and collect information to help identify ways in which the development of a commercially viable marine energy industry can be accelerated. The workshop was comprised of plenary sessions that reviewed the state of the marine energy industry and technical sessions that covered specific topics of relevance. Each session consisted of presentations, followed by facilitated discussions. During the facilitated discussions, the session chairs posed several prepared questions to the presenters and audience to encourage communication and the exchange of ideas between technical experts. Following the workshop, attendees were asked to provide written feedback on their takeaways and their best ideas on how to accelerate the pace of marine energy technology development. The first four sections of this document give a general overview of the workshop format, provide presentation abstracts and discussion session notes, and list responses to the post-workshop questions. The final section presents key findings and conclusions from the workshop that suggest how the U.S. Department of Energy and national laboratory resources can be utilized to most effectively assist the marine energy industry.

Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop

Energy Technology Data Exchange (ETDEWEB)

Musial, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lawson, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Rooney, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-02-01

The Marine and Hydrokinetic Technology (MHK) Instrumentation, Measurement, and Computer Modeling Workshop was hosted by the National Renewable Energy Laboratory (NREL) in Broomfield, Colorado, July 9–10, 2012. The workshop brought together over 60 experts in marine energy technologies to disseminate technical information to the marine energy community, and to collect information to help identify ways in which the development of a commercially viable marine energy industry can be accelerated. The workshop was comprised of plenary sessions that reviewed the state of the marine energy industry and technical sessions that covered specific topics of relevance. Each session consisted of presentations, followed by facilitated discussions. During the facilitated discussions, the session chairs posed several prepared questions to the presenters and audience to encourage communication and the exchange of ideas between technical experts. Following the workshop, attendees were asked to provide written feedback on their takeaways from the workshop and their best ideas on how to accelerate the pace of marine energy technology development. The first four sections of this document give a general overview of the workshop format, provide presentation abstracts, supply discussion session notes, and list responses to the post-workshop questions. The final section presents key findings and conclusions from the workshop that suggest what the most pressing MHK technology needs are and how the U.S. Department of Energy (DOE) and national laboratory resources can be utilized to assist the marine energy industry in the most effective manner.

Proceedings from the technical workshop on near-field performance assessment for high-level waste

International Nuclear Information System (INIS)

Sellin, P.; Apted, M.; Gago, J.

1991-12-01

This report contains the proceedings of 'Technical workshop of near-filed performance assessment for high-level waste' held in Madrid October 15-17, 1990. It includes the invited presentations and summaries of the scientific discussions. The workshop covered several topics: * post-emplacement environment, * benchmarking of computer codes, * glass release, * spent-fuel release, * radionuclide solubility, * near-field transport processes, * coupled processes in the near-field, * integrated assessments, * sensitivity analyses and validation. There was an invited presentation on each topic followed by an extensive discussion. One of the points highlighted in the closing discussion of the workshop was the need for international cooperation in the field of near-field performance assessment. The general opinion was that this was best achieved in smaller groups discussing specific questions. (au) Separate abstracts were prepared for 9 papers in this volume

Trusted Silicon Stratus (TSS) Workshop

Science.gov (United States)

2011-02-01

business case for a proposed Infrastructure-as-a- Service (IaaS)/ Software -as-a- Service ( SaaS ) cloud architecture. User desires for innovative pricing and...Public Physically Unclonable Function PUF Physically Unclonable Function SaaS Software -as-a- Service SIP Semiconductor Intellectual Property SNL...WORKSHOP NIMBIS SERVICES INCORPORATED FEBRUARY 2011 FINAL TECHNICAL REPORT  ROME, NY 13441 UNITED STATES AIR FORCE  AIR FORCE

Final Technical Report: Hydrogen Codes and Standards Outreach

Energy Technology Data Exchange (ETDEWEB)

Hall, Karen I.

2007-05-12

This project contributed significantly to the development of new codes and standards, both domestically and internationally. The NHA collaborated with codes and standards development organizations to identify technical areas of expertise that would be required to produce the codes and standards that industry and DOE felt were required to facilitate commercialization of hydrogen and fuel cell technologies and infrastructure. NHA staff participated directly in technical committees and working groups where issues could be discussed with the appropriate industry groups. In other cases, the NHA recommended specific industry experts to serve on technical committees and working groups where the need for this specific industry expertise would be on-going, and where this approach was likely to contribute to timely completion of the effort. The project also facilitated dialog between codes and standards development organizations, hydrogen and fuel cell experts, the government and national labs, researchers, code officials, industry associations, as well as the public regarding the timeframes for needed codes and standards, industry consensus on technical issues, procedures for implementing changes, and general principles of hydrogen safety. The project facilitated hands-on learning, as participants in several NHA workshops and technical meetings were able to experience hydrogen vehicles, witness hydrogen refueling demonstrations, see metal hydride storage cartridges in operation, and view other hydrogen energy products.

Second international tsunami workshop on the technical aspects of tsunami warning systems, tsunami analysis, preparedness, observation and instrumentation

International Nuclear Information System (INIS)

1989-01-01

The Second Workshop on the Technical Aspects of Tsunami Warning Systems, Tsunami Analysis, Preparedness, Observation, and Instrumentation, sponsored and convened by the Intergovernmental Oceanographic Commission (IOC), was held on 1-2 August 1989, in the modern and attractive research town of Academgorodok, which is located 20 km south from downtown Novosibirsk, the capital of Siberia, USSR. The Program was arranged in eight major areas of interest covering the following: Opening and Introduction; Survey of Existing Tsunami Warning Centers - present status, results of work, plans for future development; Survey of some existing seismic data processing systems and future projects; Methods for fast evaluation of Tsunami potential and perspectives of their implementation; Tsunami data bases; Tsunami instrumentation and observations; Tsunami preparedness; and finally, a general discussion and adoption of recommendations. The Workshop presentations not only addressed the conceptual improvements that have been made, but focused on the inner workings of the Tsunami Warning System, as well, including computer applications, on-line processing and numerical modelling. Furthermore, presentations reported on progress has been made in the last few years on data telemetry, instrumentation and communications. Emphasis was placed on new concepts and their application into operational techniques that can result in improvements in data collection, rapid processing of the data, in analysis and prediction. A Summary Report on the Second International Tsunami Workshop, containing abstracted and annotated proceedings has been published as a separate report. The present Report is a Supplement to the Summary Report and contains the full text of the papers presented at this Workshop. Refs, figs and tabs

NKS Workshop on Radioanalytical Chemistry - Final report

DEFF Research Database (Denmark)

The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures by the expe......The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures...

48 CFR 252.235-7011 - Final scientific or technical report.

Science.gov (United States)

2010-10-01

... technical report. 252.235-7011 Section 252.235-7011 Federal Acquisition Regulations System DEFENSE... CLAUSES Text of Provisions And Clauses 252.235-7011 Final scientific or technical report. As prescribed in 235.072(d), use the following clause: Final Scientific or Technical Report (NOV 2004) The Contractor...

An Evaluation of the Federal Energy Management Program Technical Assistance Workshops: Results of a 1998 Customer Survey

Energy Technology Data Exchange (ETDEWEB)

G. B. Gordon; N. Hall

1999-04-01

This report presents the results of a customer telephone survey of the participants of six workshops provided by the U. S. Department of Energy Federal Energy Management Program (FEMP) during calendar years 1995 and 1996. The primary purpose for the survey was to provide the Team Leader for FEMP Technical Assistance and members of the team with detailed customer feedback pertaining to how well selected FEMP workshops are doing and to identify areas for improvement. The information presented enables managers to see both the strengths of their workshops, as well as workshop components that can be improved. In addition, the report identifies the questions included in the survey that were the most productive for obtaining customers experiences, opinions and recommendations. The experiences gained during this survey provide a platform from which to launch an annual FEMP customer survey.

Report on the FR Germany: US technical workshop on near-real-time material accounting for reprocessing plants

International Nuclear Information System (INIS)

Weh, R.; Hakkila, E.A.; Canty, M.J.

1986-01-01

A technical workshop on the subject of near-real-time material accounting in an industrial scale reprocessing plant was held. Organized within the context of the US DOE - FR German Ministry of Research and Technology (BMFT) agreement in the field of international safeguards, the workshop was initiated by the Deutsche Gesellschaft fur Wiederaufarbeitung von Kernbrennstoffen, responsible for the construction and operation of a planned industrial scale reprocessing plant in the FR Germany. The workshop's objective was to establish the current state of the art for near-real-time accounting and to bring out a common understanding and consensus among experts from both countries which seve as a basis for the definition of problems still to be solved. A summary of the workshop presentations, preliminary conclusions drawn by the experts attending as well as some implications for the application of dynamic balancing are given

Baltic Nuclear workshop. Final report

International Nuclear Information System (INIS)

Wahlberg, L.G.

2001-05-01

Proceedings of the NKS/BOK-1.6 workshop on crisis communication 'Baltic Nuclear', held in Stockholm March 19 -20, 2001, with participants from the nuclear power plants and nuclear authorities in the Baltic Sea region. The main content of the workshop was founded on the principle of 'learning by doing'. The participants were therefore practically trained in how to handle a crisis from an information and communication point of view. Added to that there were three different lectures. (au)

Fourth natural analogue working group meeting and Pocos de Caldas project final workshop

International Nuclear Information System (INIS)

Come, B.; Chapman, N.A.

1991-01-01

The fourth meeting of the CEC-sponsored natural analogue working group (NAWG) was held in Pitlochry, Scotland, from 18 to 22 June 1990, and also included the final workshop of the Pocos de Caldas (Brazil) natural analogue project, sponsored by Nagra (CH), SKB (S) UK-DOE and US-DOE. About 80 specialists attended this meeting, originating from EC Member States and also Australia, Brazil, Canada, Finland, Japan, Sweden, Switzerland and the USA. The IAEA and OCDE-NEA were also represented. This plenary meeting was the opportunity to review and discuss five years of progress and activities of natural analogues in central areas of performance assessment: waste forms and engineered barriers, geochemistry and radionuclide speciation, radionuclide migration and the overall geological context of radwaste disposal. In addition, a feedback session provided the opportunity for regulators and those individuals who had advisory roles to give their views and impressions on the significance of natural analogue research. These proceedings, divided into two sessions, contain 32 technical papers and 14 abstracts of published papers

Guidelines for Preparing Final Technical Reports

International Development Research Centre (IDRC) Digital Library (Canada)

fdieudonne

Prior to submitting the Final Technical Report, any outstanding issues related to dissemination in accordance with ... The report should be an opportunity to reflect on the management of the project from various perspectives: .... of poor quality.

Technical evaluation report of the Fort St. Vrain final draft upgraded technical specifications

International Nuclear Information System (INIS)

Kimura, C.Y.

1989-01-01

This report is a technical evaluation of the final draft of the Fort St. Vrain (FSV) Upgraded Technical Specifications (UT/S) as issued by Public Service of Colorado (PSC) on May 27, 1988 with subsequent supplemental updates issued on June 15, 1988 and August 5, 1988. It has been compared for consistency, and safety conservatism with the Fort St. Vrain (FSV) Updated Final Safety Analysis Report (FSAR), the FSV Safety Evaluation Report (SER), the Facility Operating License, DPR-34, and all amendments to the Facility Operating License issued as of June 1, 1988, and Appendix A to the Operating License DPR-34, Technical Specifications. Because of the age of the plant, no supplements to the Fort St. Vrain SER have been issued since the original SER was not issued as a WASH or a NUREG report. This made it necessary to review all amendments to the Facility Operating License since they would contain the safety evaluations done to support changes to the Facility Operating License. The upgraded Fort St. Vrain Technical Specifications were also broadly compared with the latest Westinghouse Standard Technical Specifications (WSTS) to assure that what was proposed for Fort St. Vrain was consistent with the latest NRC staff practices for standard technical specifications

AECB workshop on seismic hazard assessment in southern Ontario

International Nuclear Information System (INIS)

Stepp, J.C.; Price, R.A.; Coppersmith, K.J.; Klimkiewicz, G.C.; McGuire, R.K.

1995-10-01

The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: (1) The importance of geological and geophysical observations for the determination of seismic sources, (2) Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information, (3) Methods and data which should be used for characterizing the seismicity parameters of seismic sources, and (4) Methods for assessment of vibratory ground motion hazard. The format of each session involved invited presentations of relevant data followed by open presentations by participants, a general discussion focusing on the relevance of the presented information for seismic hazard assessment in southern Ontario, then development of conclusions and recommendations. In the final session, the conclusions and recommendations were summarized and an open discussion was held to develop consensus. This report presents perspective summaries of the workshop technical sessions together with conclusions and recommendations prepared by the session chairs and the general chairman. 2 refs

Providing Total Quality Fundamentals: 1995 Workshops for the NASA Lewis Research Center's Technical Services Directorate

Science.gov (United States)

Antczak, Paul; Jacinto,Gilda; Simek, Jimmy

1997-01-01

The National Aeronautics and Space Administration's (NASA) agency-wide movement to cultivate a quality workplace is the basis for Lewis Research Center to implement Total Quality Fundamentals (TQF) initiatives. The Lewis Technical Services Directorate (TSD) introduced the Total Quality Fundamentals (TQF) workshops to its work force as an opportunity to introduce the concepts and principles of TQF. These workshops also provided the participants with the opportunity to dialogue with fellow TSD employees and managers. This report describes, through the perspective of the Lewis TSD TQF Coaches, how the TQF work- shop process was accomplished in TSD. It describes the structure for addressing the need, implementation process, input the TSD Coaches provided, common themes and concerns raised, conclusions, and recommendations. The Coaches concluded that these types of workshops could be the key to open the communication channels that are necessary to help everyone at Lewis understand where they fit in the organization. TQF workshops can strengthen the participant's connection with the Mission, Vision of the Center, and Vision of the Agency. Reconunendations are given based on these conclusions that can help the TSD Quality Board develop attainable measures towards a quality workplace.

Buildings energy management program workshop design. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1978-12-01

This document describes activities undertaken by Honeywell's Energy Resources Center for design and development of the format, content, and materials that were used in conducting 129 one-day energy management workshops for specific commercial business audiences. The Building Energy Management Workshop Program was part of a National Workshop Program that was intended to increase awareness of energy-related issues and to encourage energy-conservation actions on the part of commercial and industrial sectors. The total effort included executive conferences for chief executive officers and other senior management personnel; industrial energy-conservation workshops directed at plant management and engineering personnel; vanpooling workshops designed to inform and encourage business in implementing a vanpooling program for employees; and the building energy-management workshops specifically developed for managers, owners, and operators of office and retail facilities, restaurants, and supermarkets. The total program spanned nearly two years and reached approximately 2,500 participants from all parts of the U.S. A detailed followup evaluation is still being conducted to determine the impact of this program in terms of conservation action undertaken by workshop participants.

Final Scientific/Technical Report Solar America Initiative: Solar Outreach and Communications

Energy Technology Data Exchange (ETDEWEB)

Weissman, Jane M

2011-09-10

The purpose of the Solar America Initiative: Solar Outreach and Communications grant was to promote better communications among stakeholders; address infrastructure barriers to solar energy; and coordinate with industry, the U.S. Department of Energy, national laboratories, states, cities and counties. The Interstate Renewable Energy Council (IREC), a non-profit organization formed in 1982, approached this grant project by establishing a wide range of communication and outreach activities including newsletters, workshops, webinars, model practices and publications; by advancing easy and fair hook-up rules to the utility grid; and by upgrading training based on industry competency standards. The Connecting to the Grid project and the Solar Codes and Standards Public Hearings project offered communication coupled with technical assistance to overcome interconnection, net metering and other regulatory and program barriers. The Workforce Development Project tackled building a strong workforce through quality training and competency assessment programs. IREC's web site, the semi-monthly state and stakeholder newsletter and the metrics report resulted in better communications among stakeholders. Workshops and phone seminars offered technical assistance and kept stakeholders up-to-date on key issues. All of these activities resulted in implementing sustainable solutions to institutional and market barriers to solar energy and getting the right information to the right people.

IFMIF-CDA technical workshop on lithium target system. Proceedings

International Nuclear Information System (INIS)

1995-09-01

An intense neutron source, International Fusion Materials Irradiation Facility (IFMIF) is planned under the collaborative program by International Energy Agency (IEA), and the Conceptual Design Activity (CDA) started in February 1995. US, Japan and EU are responsible to take a lead in coordinating accelerator, target and test cell design, respectively. In order to exchange the current results of the study and to coordinate the activities for the design integration, the first technical workshop on the lithium target system was held in the period of July 18-21 at the Tokai Research Establishment of the JAERI. This publication summarizes the materials presented in this meeting. The presentations and discussions were organized with the identified CDA tasks. It was confirmed that the reference design of the IFMIF target based on the previous studies under FMIT and ESNIT, elaborated to meet IFMIF parameters, is reasonable and feasible. It was pointed out that the interface between accelerator and test cell subsystems should be carefully investigated to avoid technical conflicts. Some design options such as nozzle, backwall and lithium jet geometry, lithium purity control, and lithium vapor control, based on the current technology were proposed to improve the integral target system function, and further R and D studies were suggested for design integration. (author)

Japanese contributions to IAEA INTOR workshop, phase two A, part 2 chapter VII: technical benefit

International Nuclear Information System (INIS)

Itoh, Shin-ichi; Iida, Hiromasa; Tomabechi, Ken; Tone, Tatsuzo; Fujisawa, Noboru.

1985-07-01

This report corresponds to Chapter VII of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 2. The purpose of technical benefit study is to examine the implications of having different manufacturers fabricate components of a major system of INTOR. A systematic examinations of advantages and disadvantages of designing and fabricating major INTOR components in the frame of one international joint projects is performed. (author)

Low-level waste workshops. Final report

International Nuclear Information System (INIS)

1983-01-01

The Low-Level Radioactive Waste Policy Act of 1980 specifies that each state is responsible for the disposal of the low-level waste which is generated within its boundaries. The Act states that such wastes can be most safely and efficiently managed on a regional basis through compacts. It also defines low-level waste as waste which is not classified as high-level radioactive waste, transuranic waste, spent nuclear fuel, or by-product material as defined in the Atomic Energy Act of 1954. The Policy Act also stipulates that regional agreements or compacts shall not be applicable to the transportation, management, or disposal of low-level radioactive waste from atomic energy defense activities or federal research and development activities. It also specifies that agreements or compacts shall take affect on January 1, 1986, upon Congressional approval. In February 1983, the US Department of Energy awarded a grant to the Council of State Governments' Midwestern Office. The grant was to be used to fund workshops for legislation on low-level radioactive waste issues. The purpose of the workshops was to provide discussion specifically on the Midwest Interstate Compact on Low-Level Radioactive Waste. Legislators from the states which were eligible to join the compact were invited: Delaware, Illinois, Indiana, Iowa, Kentucky, Maryland, Michigan, Minnesota, Missouri, North Dakota, Ohio, South Dakota and Wisconsin. Virginia, Kansas and Nebraska were also eligible but had joined other compacts. Consequently, they weren't invited to the workshops. The Governor's office of West Virginia expressed interest in the compact, and its legislators were invited to attend a workshop. Two workshops were held in March. This report is a summary of the proceedings which details the concerns of the compact and expresses the reasoning behind supporting or not supporting the compact

The QED Workshop

Energy Technology Data Exchange (ETDEWEB)

Pieper, G.W.

1994-07-01

On May 18--20, 1994, Argonne National Laboratory hosted the QED Workshop. The workshop was supported by special funding from the Office of Naval Research. The purpose of the workshop was to assemble of a group of researchers to consider whether it is desirable and feasible to build a proof-checked encyclopedia of mathematics, with an associated facility for theorem proving and proof checking. Among the projects represented were Coq, Eves, HOL, ILF, Imps, MathPert, Mizar, NQTHM, NuPrl, OTTER, Proof Pad, Qu-Prolog, and RRL. Although the content of the QED project is highly technical rigorously proof-checked mathematics of all sorts the discussions at the workshop were rarely technical. No prepared talks or papers were given. Instead, the discussions focused primarily on such political, sociological, practical, and aesthetic questions, such as Why do it? Who are the customers? How can one get mathematicians interested? What sort of interfaces are desirable? The most important conclusion of the workshop was that QED is an idea worthy pursuing, a statement with which virtually all the participants agreed. In this document, the authors capture some of the discussions and outline suggestions for the start of a QED scientific community.

76 FR 66078 - Notice of Industry Workshop on Technical and Regulatory Challenges in Deep and Ultra-Deep Outer...

Science.gov (United States)

2011-10-25

...-0087] Notice of Industry Workshop on Technical and Regulatory Challenges in Deep and Ultra-Deep Outer... discussions expected to help identify Outer Continental Shelf (OCS) challenges and technologies associated... structured venue for consultation among offshore deepwater oil and gas industry and regulatory experts in...

Final report: ES11: The 23rd Annual Workshop on Electronic Structure Methods

Energy Technology Data Exchange (ETDEWEB)

Rappe, Andrew M. [Univ. of Pennsylvania, Philadelphia, PA (United States). Dept. of Chemistry

2011-08-31

ES11: the 23rd Annual Workshop on Electronic Structure Methods was held from June 6-9, 2011 at the University of Pennsylvania. The local organizing committee (see Section II) led by PI Andrew M. Rappe supervised the organization of the conference, before, during, and after the meeting itself. The national organizing committee set the technical program of talks, and provided support and advice in various ways. The conference was well-attended (see Section III). An important feature of this conference was a series of panel discussions (see Section IV) to discuss the field of electronic structure and to set new directions. The technical program was of extraordinarily high quality (see Section V). The host institution, the University of Pennsylvania, provided a supportive environment for this meeting (see Section VI).

Technical workshop on safeguards, verification technologies, and other related experience

International Nuclear Information System (INIS)

1998-01-01

The aim of the Technical Workshop on safeguards was to encourage a clearer understanding of the IAEA Safeguards System, its origins and evolution and the present state of the art. Presentations held by the IAEA officials and outside experts examined as well other components of the non-proliferation regime, the current practices and procedures, and the future prospects. A series of presentations described the characteristics of the interaction between global and regional verification systems and described relevant past and present experience. Prominence given to such state of the art verification technologies as environmental sampling, satellite imaging and monitoring thorough remote and unattended techniques demonstrated, beyond any doubt, the essentially dynamic nature of verification. It is generally acknowledged that there have been major achievements in preventing spread of nuclear weapons, but no verification system can in itself prevent proliferation

Technical workshop on safeguards, verification technologies, and other related experience

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-31

The aim of the Technical Workshop on safeguards was to encourage a clearer understanding of the IAEA Safeguards System, its origins and evolution and the present state of the art. Presentations held by the IAEA officials and outside experts examined as well other components of the non-proliferation regime, the current practices and procedures, and the future prospects. A series of presentations described the characteristics of the interaction between global and regional verification systems and described relevant past and present experience. Prominence given to such state of the art verification technologies as environmental sampling, satellite imaging and monitoring thorough remote and unattended techniques demonstrated, beyond any doubt, the essentially dynamic nature of verification. It is generally acknowledged that there have been major achievements in preventing spread of nuclear weapons, but no verification system can in itself prevent proliferation Refs, figs, tabs

Students' Perception of Daylight Illumination in the School Workshop as a Determinant for Effective Students' Task Performance in Workshop Practice

Science.gov (United States)

Amasuomo, Japo Oweikeye Morto; Alio, Abigail Ngozi

2013-01-01

The study investigated daylight illumination in the school workshop as a determinant for effective students' task performance in workshop practice. 183 NCE Technical students in 300 Level which comprised of 73 and 112 students from Federal Colleges of Education (Technical), Asaba and Omoku, Nigeria respectively during the 2008/2009 academic…

Workshop on PSA for New and Advanced Reactors

International Nuclear Information System (INIS)

2012-01-01

This workshop was organized by the NEA Working Group on Risk Assessment (WGRISK). The key objective of the workshop was to share the current state-of-the art on the PSA (Probabilistic Safety Assessment) applied for new reactors and advanced reactors. Fifty experts from 13 countries and one international organization (IAEA) participated in the present workshop, and 35 technical papers were presented. The main topics of interest, discussed during the workshop, included the followings: regulatory aspects, risk-informed methods, technical aspects of the PSA for new and advanced reactors, hazards of PSA (internal and external), severe accident/source term/Level 2 PSA, and consequence analysis/Level 3 PSA. Among the technical aspects of the PSA, the assessment of the reliability of passive safety systems appears to be a recurrent issue

Final technical report

DEFF Research Database (Denmark)

Juhl, Thomas Winther; Nielsen, Jakob Skov

gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...... cutting nozzle which can be adjusted independently to the laser beam has been developed. The position of the focus relative the workpiece can be adjusted to cutting applications with relatively large processing windows, i.e. both mild and stainless steels, and of a broad thickness range. A build-in auto......This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial...

Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter I: introduction, and chapter II: summary

International Nuclear Information System (INIS)

Mori, Sigeru; Tomabechi, Ken; Fujisawa, Noboru; Iida, Hiromasa; Sugihara, Masayoshi; Seki, Masahiro; Honda, Tsutomu; Kasai, Masao; Itoh, Shin-ichi.

1985-07-01

This report corresponds to Chapters I and II of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 2. The major objectives of the INTOR workshop, Phase Two A, Part 2 are to study critical technical issues, and to assess scientific and technical data bases, and to finally upgrade the INTOR design concept. To study critical technical issues that affect the feasibility or practicability of the INTOR design concept, the following five groups are organized; (A) Impurity control, (B) RF heating and current drive, (C) Transient electromagnetics, (D) Maintainability, (E) Technical benefit. In addition to those groups, the three disciplinary groups are organized to assess the worldiode scientific and technical data bases that exist now and that will exist 4-5 years to support the detailed design and construction of an INTOR-like machine, and to identify additional R D that is required; (F) Physics, (G) Engineering, (H) Nuclear. (author)

Final Technical Report 2000 HU CFRT Summer High School Fusion Workshop Grant No. DE-FG02-00ER54586. Final Report, June 1, 2000 - May 31, 2001

International Nuclear Information System (INIS)

Ali, Halima

2002-01-01

The 2000 summer fusion science high school workshop was held for eight weeks. Four rising senior/junior high school students participated in the workshop. Students were mentored by Drs. Ali and Punjabi. Based on their summer research projects, students presented contributed papers at the 2000 APS DPP meeting in Quebec City, Canada. Student posters were well-received by the fusion community

The Blue Dot Workshop: Spectroscopic Search for Life on Extrasolar Planets

Science.gov (United States)

Des Marais, David J. (Editor)

1997-01-01

This workshop explored the key questions and challenges associated with detecting life on an extrasolar planet. The final product will be a NASA Conference Publication which includes the abstracts from 21 talks, summaries of key findings, and recommendations for future research. The workshop included sessions on three related topics: the biogeochemistry of biogenic gases in the atmosphere, the chemistry and spectroscopy of planetary atmospheres, and the remote sensing of planetary atmospheres and surfaces. With the observation that planetary formation is probably a common phenomenon, together with the advent of the technical capability to locate and describe extrasolar planets, this research area indeed has an exciting future.

Eleventh workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Counsil, J.R. (Stanford Geothermal Program)

1986-01-23

The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Department of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil

8. stellarator workshop

International Nuclear Information System (INIS)

1991-07-01

The technical reports in this collection of papers were presented at the 8th International Workshop on Stellarators, and International Atomic Energy Agency Technical Committee Meeting. They include presentations on transport, magnetic configurations, fluctuations, equilibrium, stability, edge plasma and wall aspects, heating, diagnostics, new concepts and reactor studies. Refs, figs and tabs

Magnetic Suspension Technology Workshop

International Nuclear Information System (INIS)

Keckler, C.R.; Groom, N.J.; Britcher, C.P.

1993-01-01

In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided. Separate abstracts have been prepared for articles from this report

IDA and the Technical Cooperation Program Real-Time Systems and Ada Workshop, 21-23 June 1988

Science.gov (United States)

1988-06-01

IDA Memorandum Report M-540, IDA and the Technical Cooperation Program Real - Time Systems and Ada Workshop, 21-23 June 1988, documents the results of... time systems , (2) identify and clarify known Ada real-time issues, (3) identify near-term and long-term solutions, and (4) provide assessment and...Technology (ODUSD R&AT). Funding was provided by the STARS Joint Program Office. The objectives were to (1) define requirements for using Ada in real

Systems study 'Alternative Entsorgung'. Final report. Technical annex 10

International Nuclear Information System (INIS)

Hartje, B.; Kronschnabel, H.; Mueller, W.F.W.

1984-01-01

There is an investigation whether accessibility can be produced to fuel elements stored in a salt mine. All solutions of the problem were followed up until the technically best one was found. Two conditions must be fulfilled for access to the final storage barrel: - There must be a climate which is suitable for people. The Mining Order is the basis for this. - The pit building must be fixed, in the convergence in the salt mine should not lead to it becoming impossible to reach part of the mine. Due to heat-producing waste, rock temperatures are caused in the salt mine, in which mining is no longer possible. Building on the idea of cooling the whole final storage area using concentric sections, the amount of heat to be removal was first estimated. Cooling of the whole final storage area proved to be technically unjustifiable and uninteresting at present. (orig./HP) [de

Workshop on rock mechanics issues in repository design and performance assessment

International Nuclear Information System (INIS)

1996-04-01

The Center for Nuclear Waste Regulatory Analyses organized and hosted a workshop on ''Rock Mechanics Issues in Repository Design and Performance Assessment'' on behalf its sponsor the U.S. Nuclear Regulatory Commission (NRC). This workshop was held on September 19- 20, 1994 at the Holiday Inn Crowne Plaza, Rockville, Maryland. The objectives of the workshop were to stimulate exchange of technical information among parties actively investigating rock mechanics issues relevant to the proposed high-level waste repository at Yucca Mountain and identify/confirm rock mechanics issues important to repository design and performance assessment The workshop contained three technical sessions and two panel discussions. The participants included technical and research staffs representing the NRC and the Department of Energy and their contractors, as well as researchers from the academic, commercial, and international technical communities. These proceedings include most of the technical papers presented in the technical sessions and the transcripts for the two panel discussions

High-Penetration Photovoltaics Standards and Codes Workshop, Denver, Colorado, May 20, 2010: Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.; Herig, C.; Bower, W.

2010-09-01

Effectively interconnecting high-level penetration of photovoltaic (PV) systems requires careful technical attention to ensuring compatibility with electric power systems. Standards, codes, and implementation have been cited as major impediments to widespread use of PV within electric power systems. On May 20, 2010, in Denver, Colorado, the National Renewable Energy Laboratory, in conjunction with the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), held a workshop to examine the key technical issues and barriers associated with high PV penetration levels with an emphasis on codes and standards. This workshop included building upon results of the High Penetration of Photovoltaic (PV) Systems into the Distribution Grid workshop held in Ontario California on February 24-25, 2009, and upon the stimulating presentations of the diverse stakeholder presentations.

Baltic Nuclear workshop. Final report[Crisis communication

Energy Technology Data Exchange (ETDEWEB)

Wahlberg, L.G

2001-05-01

Proceedings of the NKS/BOK-1.6 workshop on crisis communication 'Baltic Nuclear', held in Stockholm March 19 -20, 2001, with participants from the nuclear power plants and nuclear authorities in the Baltic Sea region. The main content of the workshop was founded on the principle of 'learning by doing'. The participants were therefore practically trained in how to handle a crisis from an information and communication point of view. Added to that there were three different lectures. (au)

Proceedings of IEEE Machine Learning for Signal Processing Workshop XV

DEFF Research Database (Denmark)

Larsen, Jan

These proceedings contains refereed papers presented at the Fifteenth IEEE Workshop on Machine Learning for Signal Processing (MLSP’2005), held in Mystic, Connecticut, USA, September 28-30, 2005. This is a continuation of the IEEE Workshops on Neural Networks for Signal Processing (NNSP) organized...... by the NNSP Technical Committee of the IEEE Signal Processing Society. The name of the Technical Committee, hence of the Workshop, was changed to Machine Learning for Signal Processing in September 2003 to better reflect the areas represented by the Technical Committee. The conference is organized...... by the Machine Learning for Signal Processing Technical Committee with sponsorship of the IEEE Signal Processing Society. Following the practice started two years ago, the bound volume of the proceedings is going to be published by IEEE following the Workshop, and we are pleased to offer to conference attendees...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Science.gov (United States)

2010-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.157 Section 52.157 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...

10 CFR 52.79 - Contents of applications; technical information in final safety analysis report.

Science.gov (United States)

2010-01-01

...; technical information in final safety analysis report. (a) The application must contain a final safety... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.79 Section 52.79 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...

48 CFR 1852.235-73 - Final Scientific and Technical Reports.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Final Scientific and Technical Reports. 1852.235-73 Section 1852.235-73 Federal Acquisition Regulations System NATIONAL..., including recommendations and conclusions based on the experience and results obtained. The final report...

Next Generation Safeguards Initiative Workshop on Enhanced Recruiting for International Safeguards

International Nuclear Information System (INIS)

Pepper, S.E.; Rosenthal, M.D.; Fishbone, L.G.; Occhogrosso, D.M.; Lockwood, D.; Carroll, C.J.; Dreicer, M.; Wallace, R.; Fankhauser, J.

2009-01-01

Brookhaven National Laboratory (BNL) hosted a Workshop on Enhanced Recruiting for International Safeguards October 22 and 23, 2008. The workshop was sponsored by DOE/NA-243 under the Next Generation Safeguards Initiative (NGSI). Placing well-qualified Americans in sufficient number and in key safeguards positions within the International Atomic Energy Agency's (IAEA's) Department of Safeguards is an important U.S. non-proliferation objective. The goal of the NGSI Workshop on Enhanced Recruiting for International Safeguards was to improve U.S. efforts to recruit U.S. citizens for IAEA positions in the Department of Safeguards. The participants considered the specific challenges of recruiting professional staff, safeguards inspectors, and managers. BNL's International Safeguards Project Office invited participants from the U.S. Department of Energy, the IAEA, U.S. national laboratories, private industry, academia, and professional societies who are either experts in international safeguards or who understand the challenges of recruiting for technical positions. A final report for the workshop will be finalized and distributed in early 2009. The main finding of the workshop was the need for an integrated recruitment plan to take into account pools of potential candidates, various government and private agency stakeholders, the needs of the IAEA, and the NGSI human capital development plan. There were numerous findings related to and recommendations for maximizing the placement of U.S. experts in IAEA Safeguards positions. The workshop participants offered many ideas for increasing the pool of candidates and increasing the placement rate. This paper will provide details on these findings and recommendations

Next Generation Safeguards Initiative Workshop on Enhanced Recruiting for International Safeguards

Energy Technology Data Exchange (ETDEWEB)

Pepper,S.E.; Rosenthal, M.D.; Fishbone, L.G.; Occhogrosso, D.M.; Lockwood, D.; Carroll, C.J.; Dreicer, M.; Wallace, R.; Fankhauser, J.

2009-07-12

Brookhaven National Laboratory (BNL) hosted a Workshop on Enhanced Recruiting for International Safeguards October 22 and 23, 2008. The workshop was sponsored by DOE/NA-243 under the Next Generation Safeguards Initiative (NGSI). Placing well-qualified Americans in sufficient number and in key safeguards positions within the International Atomic Energy Agency’s (IAEA’s) Department of Safeguards is an important U.S. non-proliferation objective. The goal of the NGSI Workshop on Enhanced Recruiting for International Safeguards was to improve U.S. efforts to recruit U.S. citizens for IAEA positions in the Department of Safeguards. The participants considered the specific challenges of recruiting professional staff, safeguards inspectors, and managers. BNL’s International Safeguards Project Office invited participants from the U.S. Department of Energy, the IAEA, U.S. national laboratories, private industry, academia, and professional societies who are either experts in international safeguards or who understand the challenges of recruiting for technical positions. A final report for the workshop will be finalized and distributed in early 2009. The main finding of the workshop was the need for an integrated recruitment plan to take into account pools of potential candidates, various government and private agency stakeholders, the needs of the IAEA, and the NGSI human capital development plan. There were numerous findings related to and recommendations for maximizing the placement of U.S. experts in IAEA Safeguards positions. The workshop participants offered many ideas for increasing the pool of candidates and increasing the placement rate. This paper will provide details on these findings and recommendations

International ISOE Workshop - Direction Forward for the Finalization of the EG-SAM Report

International Nuclear Information System (INIS)

Okyar, H. Burcin

2014-01-01

The objective of the ISOE Expert Group on Occupational Radiation Protection in Severe Accident Management and Post-accident Recovery (EG-SAM) is to develop a report on best radiation protection management procedures for proper radiation protection job coverage during severe accident initial response and recovery efforts to identify good radiation protection practices and to organise and communicate radiation protection lessons learned from previous reactor accidents. The outcome of the work will be a new ISOE publication on Occupational Radiation Protection in severe accident management that will find broad use within the NPP radiation protection community. The EG-SAM has finalized an interim report which was presented at the Washington workshop. The interim report covered the following topics: RP Management and Organisation; RP Training and Exercises related to Severe Accident Management; Facility Configuration and Readiness; Overall Approach for Worker Protection; Monitoring and Managing the Radioactive Releases and Contamination; Key Lessons Learned from Past Accidents; Conclusions. Utilities and Regulatory Authorities have identified the factors and aspects which play key roles in achieving good practices on occupational radiation protection in severe accident management and post-accident recovery: knowledge, experience, technology, regulatory requirements and guidance, worker involvement, information exchange, training aspects, etc. They have analysed and quantified their impact on worker doses, and submitted recommendations for further work. The next step will be a final meeting of the EG-SAM for the finalization of the report with workshop inputs before its submission for approval

Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Aristos Aristidou Natureworks); Robert Kean (NatureWorks); Tom Schechinger (IronHorse Farms, Mat); Stuart Birrell (Iowa State); Jill Euken (Wallace Foundation & Iowa State)

2007-10-01

The two main objectives of this project were: 1) to develop and test technologies to harvest, transport, store, and separate corn stover to supply a clean raw material to the bioproducts industry, and 2) engineer fermentation systems to meet performance targets for lactic acid and ethanol manufacturers. Significant progress was made in testing methods to harvest corn stover in a “single pass” harvest mode (collect corn grain and stover at the same time). This is technically feasible on small scale, but additional equipment refinements will be needed to facilitate cost effective harvest on a larger scale. Transportation models were developed, which indicate that at a corn stover yield of 2.8 tons/acre and purchase price of $35/ton stover, it would be unprofitable to transport stover more than about 25 miles; thus suggesting the development of many regional collection centers. Therefore, collection centers should be located within about 30 miles of the farm, to keep transportation costs to an acceptable level. These collection centers could then potentially do some preprocessing (to fractionate or increase bulk density) and/or ship the biomass by rail or barge to the final customers. Wet storage of stover via ensilage was tested, but no clear economic advantages were evident. Wet storage eliminates fire risk, but increases the complexity of component separation and may result in a small loss of carbohydrate content (fermentation potential). A study of possible supplier-producer relationships, concluded that a “quasi-vertical” integration model would be best suited for new bioproducts industries based on stover. In this model, the relationship would involve a multiyear supply contract (processor with purchase guarantees, producer group with supply guarantees). Price will likely be fixed or calculated based on some formula (possibly a cost plus). Initial quality requirements will be specified (but subject to refinement).Producers would invest in harvest

Workshop on Subcritical Neutron Production

International Nuclear Information System (INIS)

Walter Sadowski; Roald Sagdeev

2006-01-01

of current fusion technology to utilize the actinides for generating energy and destroying long-lived fission products calls for a greater international effort in the area of fusion driven sub-critical systems The Workshop recommends that a series of steps be carried out by the technical community leading to a proof-of-principle facility. The workshop strongly recommends that the fusion community work closely with other technical communities to ensure that a wider range of technical solutions is available to solve the spent fuel problem and to utilize the current actinide inventories. The workshop formed a small group to facilitate follow-up interactions and cooperative work. It was agreed that a follow-on workshop, possibly under the aegis of the IAEA, will be held in April of 2005

Biomass market introduction. How to overcome the non-technical barriers for a wider use of biomass gasification in Europe. Proceedings of a workshop. Utrecht, November 28. 1997

International Nuclear Information System (INIS)

Kaltschmitt, M.; Kwant, K.W.

1998-03-01

Bioenergy projects can fail due to technical problems but also due to non-technical barriers. The authors mention the risk of failure, the biomass supply assurance, financing, uncertainty about emission regulations, and acceptance by the public. On the above mentioned background a workshop was organised at 28 November 1997, as a joint activity of Novem and the EU / FAIR Concerted Action Analysis and Co-ordination of the Activities concerning a Gasification of Biomass'. At this workshop important non-technical barriers are identified, ways how to overcome them are analyzed, defined and actions are discussed to be taken on the EU and National level to improve the implementation of biomass gasification projects. Copies of overhead sheets and texts of 14 papers are presented

HTTR workshop (workshop on hydrogen production technology)

International Nuclear Information System (INIS)

Shiina, Yasuaki; Takizuka, Takakazu

2004-12-01

Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

Organization of the 16th Advanced Accelerator Concepts (AAC) Workshop by Stanford University

Energy Technology Data Exchange (ETDEWEB)

Huang, Zhirong [Stanford Univ., CA (United States); Hogan, Mark [Stanford Univ., CA (United States)

2015-09-30

Essentially all we know today and will learn in the future about the fundamental nature of matter is derived from probing it with directed beams of particles such as electrons, protons, neutrons, heavy ions, and photons. The resulting ability to “see” the building blocks of matter has had an immense impact on society and our standard of living. Over the last century, particle accelerators have changed the way we look at nature and the universe we live in and have become an integral part of the Nation’s technical infrastructure. Today, particle accelerators are essential tools of modern science and technology. The cost and capabilities of accelerators would be greatly enhanced by breakthroughs in acceleration methods and technology. For the last 32 years, the Advanced Accelerator Concepts (AAC) Workshop has acted as the focal point for discussion and development of the most promising acceleration physics and technology. It is a particularly effective forum where the discussion is leveraged and promoted by the unique and demanding feature of the AAC Workshop: the working group structure, in which participants are asked to consider their contributions in terms of even larger problems to be solved. The 16th Advanced Accelerator Concepts (AAC2014) Workshop was organized by Stanford University from July 13 - 18, 2014 at the Dolce Hays Mansion in San Jose, California. The conference had a record 282 attendees including 62 students. Attendees came from 11 countries representing 66 different institutions. The workshop format consisted of plenary sessions in the morning with topical leaders from around the world presenting the latest breakthroughs to the entire workshop. In the late morning and afternoons attendees broke out into eight different working groups for more detailed presentations and discussions that were summarized on the final day of the workshop. In addition, there were student tutorial presentations on two afternoons to provide in depth education and

EXPOsOMICS: final policy workshop and stakeholder consultation.

Science.gov (United States)

Turner, Michelle C; Vineis, Paolo; Seleiro, Eduardo; Dijmarescu, Michaela; Balshaw, David; Bertollini, Roberto; Chadeau-Hyam, Marc; Gant, Timothy; Gulliver, John; Jeong, Ayoung; Kyrtopoulos, Soterios; Martuzzi, Marco; Miller, Gary W; Nawrot, Timothy; Nieuwenhuijsen, Mark; Phillips, David H; Probst-Hensch, Nicole; Samet, Jonathan; Vermeulen, Roel; Vlaanderen, Jelle; Vrijheid, Martine; Wild, Christopher; Kogevinas, Manolis

2018-02-15

The final meeting of the EXPOsOMICS project "Final Policy Workshop and Stakeholder Consultation" took place 28-29 March 2017 to present the main results of the project and discuss their implications both for future research and for regulatory and policy activities. This paper summarizes presentations and discussions at the meeting related with the main results and advances in exposome research achieved through the EXPOsOMICS project; on other parallel research initiatives on the study of the exposome in Europe and in the United States and their complementarity to EXPOsOMICS; lessons learned from these early studies on the exposome and how they may shape the future of research on environmental exposure assessment; and finally the broader implications of exposome research for risk assessment and policy development on environmental exposures. The main results of EXPOsOMICS in relation to studies of the external exposome and internal exposome in relation to both air pollution and water contaminants were presented as well as new technologies for environmental health research (adductomics) and advances in statistical methods. Although exposome research strengthens the scientific basis for policy development, there is a need in terms of showing added value for public health to: improve communication of research results to non-scientific audiences; target research to the broader landscape of societal challenges; and draw applicable conclusions. Priorities for future work include the development and standardization of methodologies and technologies for assessing the external and internal exposome, improved data sharing and integration, and the demonstration of the added value of exposome science over conventional approaches in answering priority policy questions.

Workshop on rock mechanics issues in repository design and performance assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

The Center for Nuclear Waste Regulatory Analyses organized and hosted a workshop on ``Rock Mechanics Issues in Repository Design and Performance Assessment`` on behalf its sponsor the U.S. Nuclear Regulatory Commission (NRC). This workshop was held on September 19- 20, 1994 at the Holiday Inn Crowne Plaza, Rockville, Maryland. The objectives of the workshop were to stimulate exchange of technical information among parties actively investigating rock mechanics issues relevant to the proposed high-level waste repository at Yucca Mountain and identify/confirm rock mechanics issues important to repository design and performance assessment The workshop contained three technical sessions and two panel discussions. The participants included technical and research staffs representing the NRC and the Department of Energy and their contractors, as well as researchers from the academic, commercial, and international technical communities. These proceedings include most of the technical papers presented in the technical sessions and the transcripts for the two panel discussions. Selected papers have been indexed separately for inclusion the Energy Science and Technology Database.

IEEE International Workshop on Machine Learning for Signal Processing: Preface

DEFF Research Database (Denmark)

Tao, Jianhua

The 21st IEEE International Workshop on Machine Learning for Signal Processing will be held in Beijing, China, on September 18–21, 2011. The workshop series is the major annual technical event of the IEEE Signal Processing Society's Technical Committee on Machine Learning for Signal Processing...

Pulp and paper mill of the future: A workshop. Final report

Energy Technology Data Exchange (ETDEWEB)

Fleischman, E. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Sobczynski, S.F. [USDOE Assistant Secretary for Energy Efficiency and Renewable Energy, Washington, DC (United States). Office of Industrial Technologies

1993-10-01

This workshop began with sessions to consider where the industry is likely to be, or ideally where it should be, say, by the year 2020. The next sessions considered the `drivers` that motivate the industry to change. These drivers could be motivations towards the vision developed earlier, or they may be forces that tend to prevent the vision of the future form being realized. The final sessions focused on what techniques are being (or should be) developed in four major process areas of a typical manufacturing plant, consistent with the previously identified vision of a future pulp or paper mill.

Report on International Spaceborne Imaging Spectroscopy Technical Committee Calibration and Validation Workshop, National Environment Research Council Field Spectroscopy Facility, University of Edinburgh

Science.gov (United States)

Ong, C,; Mueller, A.; Thome, K.; Bachmann, M.; Czapla-Myers, J.; Holzwarth, S.; Khalsa, S. J.; Maclellan, C.; Malthus, T.; Nightingale, J.;

Nineteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

1994-01-20

PREFACE The Nineteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 18-20, 1994. This workshop opened on a sad note because of the death of Prof. Henry J. Ramey, Jr. on November 19, 1993. Hank had been fighting leukemia for a long time and finally lost the battle. Many of the workshop participants were present for the celebration of his life on January 21 at Stanford's Memorial Church. Hank was one of the founders of the Stanford Geothermal Program and the Geothermal Reservoir Engineering Workshop. His energy, kindness, quick wit, and knowledge will long be missed at future workshops. Following the Preface we have included a copy of the Memorial Resolution passed by the Stanford University Senate. There were one hundred and four registered participants. Participants were from ten foreign countries: Costa Rica, England, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, Philippines and Turkey. Workshop papers described the performance of fourteen geothermal fields outside the United States. Roland N. Home opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a presentation about the future of geothermal development. The banquet speaker was Jesus Rivera and he spoke about Energy Sources of Central American Countries. Forty two papers were presented at the Workshop. Technical papers were organized in twelve sessions concerning: sciences, injection, production, modeling, and adsorption. Session chairmen are an important part of the workshop and our thanks go to: John Counsil, Mark Walters, Dave Duchane, David Faulder, Gudmundur Bodvarsson, Jim Lovekin, Joel Renner, and Iraj Ershaghi. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who

Thirteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Brigham, W.E.; Miller, F.G.; Cook, J.W. (Stanford Geothermal Program)

1988-01-21

PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico and The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones

Risk Management Techniques and Practice Workshop Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Quinn, T; Zosel, M

2008-12-02

vendor technical or business problems. HPC, by its very nature, is an exercise in multi-level risk management. Every aspect of stewarding HPCCs into the petascale era, from identification of the program drivers to the details of procurement actions and simulation environment component deployments, represents unprecedented challenges and requires effective risk management. The fundamental purpose of this workshop was to go beyond risk management processes as such and learn how to weave effective risk management practices, techniques, and methods into all aspects of migrating HPCCs into the next generation of leadership computing systems. This workshop was a follow-on to the Petascale System Integration Workshop hosted by Lawrence Berkeley National Laboratory (LBNL)/NERSC last year. It was intended to leverage and extend the risk management experience of the participants by looking for common best practices and unique processes that have been especially successful. This workshop assessed the effectiveness of tools and techniques that are or could be helpful in HPCC risk management, with a special emphasis on how practice meets process. As the saying goes: 'In theory, there is no difference between theory and practice. In practice there is'. Finally, the workshop brought together a network of experts who shared information as technology moves into the petascale era and beyond.

SPEAR3 Workshop: Making the Scientific Case: Report from Workshop held at Stanford Synchrotron Radiation Laboratory, May 29-30, 1997

Energy Technology Data Exchange (ETDEWEB)

Brennan, S.

1998-08-13

As part of the planning process for the proposed upgrade to the SPEAR electron storage ring, SSRL, the SSRL Users Organization and the SSRL faculty sponsored a 1 1/2 day workshop on May 29-30 1997. The goal was to assess and document the impact of SPEAR3 on current and future science and technology research programs of the users of SSRL. The hard and soft x-ray beams produced at SSRL are used in a number of different scientific and technological disciplines. The workshop was organized by defining a set of areas of science and technology covering the basic activities at SSRL and inviting key people from outside Stanford to work with the SSRL faculty and staff in a set of topical groups on estimating the impact of SPEAR3 on their respective fields and developing a vision of the future opportunities. This report documents those scientific and technological opportunities and provides written summaries of the discussions. The report is organized with a brief technical description of SPEAR3 and planned beam line upgrades (which summarizes material presented to the workshop participants prior to the breakout sessions) following this executive summary. More detailed information from the topical working groups then follows. Finally, an appendix provides a list of workshop participants and a copy of the workshop agenda as well as some more detailed information on the SPEAR3 lattice and machine.

Twelfth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Rivera, J. (Stanford Geothermal Program)

1987-01-22

Preface The Twelfth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 20-22, 1987. The year ending December 1986 was very difficult for the domestic geothermal industry. Low oil prices caused a sharp drop in geothermal steam prices. We expected to see some effect upon attendance at the Twelfth Workshop. To our surprise, the attendance was up by thirteen from previous years, with one hundred and fifty-seven registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, Japan, Mexico, New Zealand, and Turkey. Despite a worldwide surplus of oil, international geothermal interest and development is growing at a remarkable pace. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Seven technical papers not presented at the Workshop are also published; they concern geothermal developments and research in Iceland, Italy, and New Zealand. In addition to these forty-eight technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was John R. Berg from the Department of Energy. We thank him for sharing with the Workshop participants his thoughts on the expectations of this agency in the role of alternative energy resources, specifically geothermal, within the country???s energy framework. His talk is represented as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: M. Gulati, K. Goyal, G.S. Bodvarsson, A.S. Batchelor, H. Dykstra, M.J. Reed, A. Truesdell, J.S. Gudmundsson, and J.R. Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank Jean Cook, Marilyn King, Amy Osugi, Terri Ramey, and Rosalee Benelli for their valued help with the meeting

Single Cell and Metagenomic Assemblies: Biology Drives Technical Choices and Goals (Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

Energy Technology Data Exchange (ETDEWEB)

Stepanauskas, Ramunas

2011-10-13

DOE JGI's Tanja Woyke, chair of the Single Cells and Metagenomes session, delivers an introduction, followed by Bigelow Laboratory's Ramunas Stepanauskas on "Single Cell and Metagenomic Assemblies: Biology Drives Technical Choices and Goals" at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

Action research Toolkit II: The Scenario Workshop

DEFF Research Database (Denmark)

Rasmussen, Lauge Baungaard

2003-01-01

The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice.......The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice....

OECD/CSNI Workshop on Best Estimate Methods and Uncertainty Evaluations - Workshop Proceedings

International Nuclear Information System (INIS)

2013-01-01

Best-Estimate Methods plus Uncertainty Evaluation are gaining increased interest in the licensing process. On the other hand, lessons learnt from the BEMUSE (NEA/CSNI/R(2011)3) and SM2A (NEA/CSNI/R(2011)3) benchmarks, progress of UAM benchmark, and answers to the WGAMA questionnaire on the Use of Best-Estimate Methodologies show that improvements of the present methods are necessary and new applications appear. The objective of this workshop is to provide a forum for a wide range of experts to exchange information in the area of best estimate analysis and uncertainty evaluation methods and address issues drawn-up from BEMUSE, UAM and SM2A activities. Both, improvement of existing methods and recent new developments are included. As a result of the workshop development, a set of recommendations, including lines for future activities were proposed. The organisation of the Workshop was divided into three parts: Opening session including key notes from OECD and IAEA representatives, Technical sessions, and a Wrap-up session. All sessions included a debate with participation from the audience constituted by 71 attendees. The workshop consisted of four technical sessions: a) Development achievements of BEPU methods and State of the Art: The objective of this session was to present the different approaches to deal with Best Estimate codes and uncertainties evaluations. A total of six papers were presented. One initial paper summarized the existing methods; the following open papers were focused on specific methods stressing their bases, peculiarities and advantages. As a result of the session a picture of the current State of the Art was obtained. b) International comparative activities: This session reviewed the set of international activities around the subject of BEPU methods benchmarking and development. From each of the activities a description of the objectives, development, main results, conclusions and recommendations (in case it is finalized) was presented. This

Workshop on power plant cable condition monitoring: Proceedings

International Nuclear Information System (INIS)

Del Valle, L.

1988-07-01

A three-day workshop on cable condition monitoring was held in San Francisco on Fegruary 16--18, 1988. The workshop was cosponsored by the Nuclear Power, Electrical Systems, and Coal Combustion Systems Divisions of the Electric Power Research Institute. The primary objective of the workshop was to identify the state-of-the-art for cable condition monitoring. Twenty-five technical papers as well as EPRI research programs were presented at the technical sessions. Four working group sessions and one general session were held on each of two days. Each group session provided a forum for participants to exchange ideas and to discuss in more depth research for cable condition monitoring, existing and innovative testing technology, and utility and NRC needs for testing. Recommendations from the working groups were summarized and presented at the end of the workshop

13th Workshop on Radiation Monitoring for the International Space Station - Final Program

International Nuclear Information System (INIS)

2008-01-01

The Workshop on Radiation Monitoring for the International Space Station (WRMISS) has been held annually since 1996. The major purpose of WRMISS is to provide a forum for discussion of technical issues concerning radiation dosimetry aboard the International Space Station. This includes discussion of new results, improved instrumentation, detector calibration, and radiation environment and transport models. The goal of WRMISS is to enhance international efforts to provide the best information on the space radiation environment in low-Earth orbit and on the exposure of astronauts and cosmonauts in order to optimize the radiation safety of the ISS crew. During the 13 th Annual WRMISS, held in the Institute of Nuclear Physics (Krakow, Poland) on 8-10 September 2008, participants presented 47 lectures

Opening Session - Introductory remarks for Workshop on Accident Tolerant Fuel. OECD/NEA Workshop on Accident Tolerant Fuels, Workshop Expectations

International Nuclear Information System (INIS)

Dujardin, Thierry; Gulliford, Jim; Massara, Simone; Pasamehmetoglu, K.

2013-01-01

The workshop opened with the welcome address from Th. Dujardin (OECD/NEA), NEA Deputy Director. Th. Dujardin recalled the integrated NEA response to the dramatic Fukushima-Daiichi events performed by three standing technical committees: the Committee on Nuclear Regulatory Activities (CNRA), the Committee on the Safety of Nuclear Installations (CSNI) and the Committee on Radiation Protection and Public Health (CRPPH). J. Gulliford (OECD/NEA) placed the workshop in the context of the activities of the Nuclear Science Committee within the framework of the NEA response to Fukushima- Daiichi. K. Pasamehmetoglu (INL, US) explained the main goals of the workshop oriented towards defining requirements for selection among various options during the feasibility phase of the development process, and not towards identifying and proposing design solutions

2012 right-of-way fatality & trespass prevention workshop

Science.gov (United States)

2013-04-30

Based on the success of the 2008 Trespasser Workshop, FRA and FTA sponsored this follow-on workshop. The keynote speech by FRA Administrator, Mr. Joseph C. Szabo, was followed by 23 technical presentations in the areas of Pedestrian Safety, Hazard Ma...

Advanced Grid Control Technologies Workshop Series | Energy Systems

Science.gov (United States)

: Smart Grid and Beyond John McDonald, Director, Technical Strategy and Policy Development, General Control Technologies Workshop Series In July 2015, NREL's energy systems integration team hosted workshops the Energy Systems Integration Facility (ESIF) and included a technology showcase featuring projects

Final workshop proceedings of the collaborative project ''Crystalline ROCK retention processes''

Energy Technology Data Exchange (ETDEWEB)

Rabung, Thomas; Garcia, David; Montoya Vanessa; Molinero, Jorge (eds.)

2014-07-01

The present document is the proceedings of the Final Workshop of the EURATOM FP7 Collaborative Project CROCK (Crystalline Rock Retention Processes). The key driver for initiation the CP CROCK, identified by national Waste Management Organizations, is the undesired high uncertainty and the associated conservatism with respect to the radionuclide transport in the crystalline host-rock far-field around geological disposal of high-level radioactive wastes.

DOE final technical report 3/1997 to 2/2005

International Nuclear Information System (INIS)

Gross, Franz L.

2005-01-01

DOE final technical report 3/1997 to 2/2005 This grant supported basic theoretical research into the derivation (from relativistic field theories) of relativistic equations for few body systems, with practical applications to the properties of 2 and 3 nucleon systems and to the nature of few-quark systems

77 FR 47495 - Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting-National...

Science.gov (United States)

2012-08-08

... Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical... 34 CFR Chapter III [CFDA Number 84.373Z] Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on Early Childhood...

Technical area status report for low-level mixed waste final waste forms

International Nuclear Information System (INIS)

Mayberry, J.L.; DeWitt, L.M.; Darnell, R.

1993-08-01

The Final Waste Forms (FWF) Technical Area Status Report (TASR) Working Group, the Vitrification Working Group (WG), and the Performance Standards Working Group were established as subgroups to the FWF Technical Support Group (TSG). The FWF TASR WG is comprised of technical representatives from most of the major DOE sites, the Nuclear Regulatory Commission (NRC), the EPA Office of Solid Waste, and the EPA's Risk Reduction Engineering Laboratory (RREL). The primary activity of the FWF TASR Working Group was to investigate and report on the current status of FWFs for LLNM in this TASR. The FWF TASR Working Group determined the current status of the development of various waste forms described above by reviewing selected articles and technical reports, summarizing data, and establishing an initial set of FWF characteristics to be used in evaluating candidate FWFS; these characteristics are summarized in Section 2. After an initial review of available information, the FWF TASR Working Group chose to study the following groups of final waste forms: hydraulic cement, sulfur polymer cement, glass, ceramic, and organic binders. The organic binders included polyethylene, bitumen, vinyl ester styrene, epoxy, and urea formaldehyde. Section 3 provides a description of each final waste form. Based on the literature review, the gaps and deficiencies in information were summarized, and conclusions and recommendations were established. The information and data presented in this TASR are intended to assist the FWF Production and Assessment TSG in evaluating the Technical Task Plans (TTPs) submitted to DOE EM-50, and thus provide DOE with the necessary information for their FWF decision-making process. This FWF TASR will also assist the DOE and the MWIP in establishing the most acceptable final waste forms for the various LLMW streams stored at DOE facilities

76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

Science.gov (United States)

2011-04-04

... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...

Technical Evaluation Report (Workshop on Visualising Network Information)

National Research Council Canada - National Science Library

Rasmussen, Lisbeth M

2006-01-01

The workshop brought together operational users, developers and researchers to explore the connection between visualisation technologies and network analysis for military and civil protection applications...

In-core fuel management: Reloading techniques. Proceedings of a technical committee meeting and workshop held in Vienna, 19-21 October 1992

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

The purpose of the Technical Committee Meeting and Workshop on In-core Fuel Management - Reloading Techniques, convened by the IAEA in Vienna from 19 to 21 October 1992, was to provide an international forum to review and discuss in-core fuel management reloading techniques for light water reactors. A presentation of the history and status of reloading techniques was given by S.H. Levine, Pennsylvania State University, and papers on various computer code descriptions, methodologies and experiences of utilities and vendors for nuclear fuel reloading were presented and discussed. Optimization techniques for reloadings, expert system codes and the number of energy groups used in reloading calculations were discussed in more detail during a workshop session. Refs, figs and tabs.

Proceedings of workshop 5: Flow and transport through unsaturated fractured rock -- related to high-level radioactive waste disposal

International Nuclear Information System (INIS)

Evans, D.D.; Nicholson, T.J.

1993-06-01

The ''Workshop on Flow and Transport Through Unsaturated Fractured Rock Related to High-Level Radioactive Waste Disposal'' was cosponsored by the NRC, the Center for Nuclear Waste Regulatory Analyses, and the University of Arizona (UAZ) and was held in Tucson, Arizona, on January 7--10, 1991. The focus of this workshop, similar to the earlier four (the first being in 1982), related to hydrogeologic technical issues associated with possible disposal of commercial high-level nuclear waste (HLW) in a geologic repository within an unsaturated fractured rock system which coincides with the UAZ field studies on HLW disposal. The presentations and discussions centered on flow and transport processes and conditions, relevant parameters, as well as state-of-the-art measurement techniques, and modeling capabilities. The workshop consisted of: four half-day technical meetings, a one day field visit to the Apache Leap test site to review ongoing field studies that are examining site characterization techniques and developing data sets for model validation studies, and a final half-day session devoted to examining research needs related to modeling groundwater flow and radionuclide transport in unsaturated, fractured rock. These proceedings provide extended abstracts of the technical presentations and short summaries of the research group reports

Ninth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

1983-12-15

The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of which 4 were not made available for publication. Several authors submitted papers not presented at the Workshop. However, these are included in the 60 papers of these Proceedings. The introductory address was given by Ron Toms of the U.S. Department of Energy, and the banquet speaker was A1 Cooper of Chevron Resources Company. An important contribution was made to the Workshop by the chairmen of the technical sessions. Other than Stanford Geothermal Program faculty members, they included: Don White (Field Developments), Bill D'Olier (Hydrothermal Systems), Herman Dykstra (Well Testing), Karsten Pruess (Well Testing), John Counsil

CEBAF/SURA 1985 Summer Workshop

International Nuclear Information System (INIS)

Crannel, H.

1985-12-01

The 1985 Summer Workshop began a new phase of planning for the experimental program at CEBAF. One goal of the Workshop was to define and describe options for equipping the CEBAF and stations with experimental equipment. Starting with an initial list of options which grew out of discussions during the Winter of 1984 and the Spring of 1985, the five working groups met during the Workshop and developed their final reports, included in these proceedings. The program of the Workshop consisted of invited talks on both theoretical and experimental topics, and working group meetings. The five working groups, include: Magnetic Spectrometers; Large Acceptance Detectors and Low Intensity Beams; Internal Targets; Positrons; Theory. These proceedings begin with an overview of CEBAF, and a report on progress made by the Magnetic Spectrometer and Internal Target Working Groups prior to the Workshop. The next part contains the invited talks, presented in the order which they were given during the week. The final reports of the five working groups follow this, and the proceedings conclude with papers contributed to the Workshop

Proceedings of IEEE Machine Learning for Signal Processing Workshop XVI

DEFF Research Database (Denmark)

Larsen, Jan

These proceedings contains refereed papers presented at the sixteenth IEEE Workshop on Machine Learning for Signal Processing (MLSP'2006), held in Maynooth, Co. Kildare, Ireland, September 6-8, 2006. This is a continuation of the IEEE Workshops on Neural Networks for Signal Processing (NNSP......). The name of the Technical Committee, hence of the Workshop, was changed to Machine Learning for Signal Processing in September 2003 to better reflect the areas represented by the Technical Committee. The conference is organized by the Machine Learning for Signal Processing Technical Committee...... the same standard as the printed version and facilitates the reading and searching of the papers. The field of machine learning has matured considerably in both methodology and real-world application domains and has become particularly important for solution of problems in signal processing. As reflected...

Report on the INMM Workshop on preparing for nuclear arms reductions to address technical transparency and verification challenges

International Nuclear Information System (INIS)

Dreicer, M.; Dalnoki-Veress, F.; Lewis, P.

2013-01-01

In May 2011, a workshop was held to develop broader awareness of the technical and operational challenges that could be used to enhance effective transparency and/or verification in the medium to long-term. Building confidence in a broader multi-lateral engagement scenario adds even greater challenges than the traditional bi-lateral approaches. The multi-disciplinary group that attended included decision-makers needing to understand present and possible future technical capabilities, and the technical community needing clearer definition of possible requirements and operational constraints. In additional to traditional presentations, the group conducted an exercise to stimulate new perspectives on verification requirements for a scenario based on nuclear arms reductions at very low numbers of nuclear weapons. The workshop participants were divided into two groups and asked to explore the political and technical requirements needed for States to move towards significant arms reductions. Using a technique called 'back-casting' participants were asked to imagine a world without nuclear weapons and describe what would be needed to achieve levels of one thousand, one hundred, ten, and ultimately zero weapons in the world. Most participants agreed that a strong political commitment will be necessary and that complete disarmament will only be possible if states are convinced that nuclear weapons serve no purpose. Both groups believed that a time period of greater instability would be encountered when moving from 1000 to 100 nuclear weapons and that it would be imperative to accelerate quickly through this period. The group discussed the need to have an international body monitor the disarmament process to maintain legitimacy for the international community. One possibility could be the development of an intergovernmental panel on verification and disarmament to monitor and facilitate disarmament. The groups recognized the problem of fissile material disposition after

AIMES Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

2017-01-31

This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

International cooperation workshop. Regional workshop for CTBTO international cooperation: Africa

International Nuclear Information System (INIS)

1999-08-01

Pursuant to the 1999 programme of work, and following the International Cooperation Workshop held in Vienna, Austria, in 1998, the Provisional Technical Secretariat (PTS) of the Preparatory Commission for the CTBTO (Prep Com) held a regional Workshop for CTBTO International Cooperation in Cairo. The purpose of the workshop was to identify how and by what means the Africa region can promote international cooperation in CTBT verification related technologies, and how the region can benefit from and contribute to Prep Com activity. PTS staff briefed the 40 participants from 22 African States who attended the Workshop on general aspects, including costs, of the establishment and operation of the CTBT verification system, including its four monitoring technologies. Participants were informed on opportunities for local institutions in the establishment of monitoring stations and on possible support for national and regional data centres. National experts presented their research and development activities and reviewed existing experiences on bi/multi-lateral cooperation. The main points of the discussion focused on the need to engage governments to advance signature/ratification, and further training opportunities for African states

Competitiveness Improvement Project Informational Workshop

Energy Technology Data Exchange (ETDEWEB)

Sinclair, Karin C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Preus, Robert W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dana, Scott [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Van Dam, Jeroen J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Damiani, Rick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jackson, Kyndall R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baring-Gould, Edward I [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Anant [Intertek

2018-02-27

This presentation was given at the Competitiveness Improvement Project (CIP) Informational Workshop on December 6, 2017. Topics covered during the workshop include an overview of the CIP, past projects, scoring criteria, technical support opportunities, certification body requirements, standards applicable to distributed wind generators, information on the National Electric Code, certification testing requirements, test site requirements, National Environmental Policy Act, design review, levelized cost of energy, procurement/contracting, project management/deliverables, and outreach materials.

Proceedings of the Real-Time Systems Engineering Workshop

Science.gov (United States)

2001-08-01

real - time systems engineering. The workshop was held as part of the SEI Symposium in...Washington, DC, during September 2000. The objective of the workshop was to identify key issues and obtain feedback from attendees concerning real - time systems engineering...and interoperability. This report summarizes the workshop in terms of foundation, management, and technical topics, and it contains a discussion related to developing a community of interest for real - time systems

NCSU reactor sharing program. Final technical report

International Nuclear Information System (INIS)

Perez, P.B.

1997-01-01

The Nuclear Reactor Program at North Carolina State University provides the PULSTAR Research Reactor and associated facilities to eligible institutions with support, in part, from the Department of Energy Reactor Sharing Program. Participation in the NCSU Reactor Sharing Program continues to increase steadily with visitors ranging from advance high school physics and chemistry students to Ph.D. level research from neighboring universities. This report is the Final Technical Report for the DOE award reference number DE-FG05-95NE38136 which covers the period September 30, 1995 through September 30, 1996

Final Report National Laboratory Professional Development Workshop for Underrepresented Participants

Energy Technology Data Exchange (ETDEWEB)

Taylor, Valerie [Texas Engineering Experiment Station, College Station, TX (United States)

2016-11-07

The 2013 CMD-IT National Laboratories Professional Development Workshop for Underrepresented Participants (CMD-IT NLPDev 2013) was held at the Oak Ridge National Laboratory campus in Oak Ridge, TN. from June 13 - 14, 2013. Sponsored by the Department of Energy (DOE) Advanced Scientific Computing Research Program, the primary goal of these workshops is to provide information about career opportunities in computational science at the various national laboratories and to mentor the underrepresented participants through community building and expert presentations focused on career success. This second annual workshop offered sessions to facilitate career advancement and, in particular, the strategies and resources needed to be successful at the national laboratories.

How to put on an ANS teachers' workshop

International Nuclear Information System (INIS)

Besmann, T.M.

1991-01-01

One of the most successful public outreach programs organized by the American Nuclear Society (ANS) has been the teachers' workshops. They are so highly thought of that a national meeting is considered incomplete without an attendant workshop. The workshops are also included in topical meetings, and a number are simply organized by local sections with no connection to a technical meeting. The accumulated experience with these workshops has now matured to where a set of reasonable guidelines can be established, although there are no guarantees of success or hard and fast rules

Final disposal in deep boreholes using multiple geological barriers. Digging deeper for safety. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Bracke, Guido; Hurst, Stephanie; Merkel, Broder; Mueller, Birgit; Schilling, Frank

2016-03-15

The proceedings of the workshop on final disposal in deep boreholes using multiple geological barriers - digging deeper for safety include contributions on the following topics: international status and safety requirements; geological and physical barriers; deep drilling - shaft building; technical barriers and emplacement technology for high P/T conditions; recovery (waste retrieval); geochemistry and monitoring.

FY 2000 international exchange project on exchanges of engineers - Coal mine technology field. Overseas workshop (China); 2000 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Chugoku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of making technical exchanges with coal mine related engineers in China and surveying levels of coal production technology and the needs in China and possibilities of technology transfer from Japan, workshop was held and technical tours were made. On December 13, 2000, a workshop was held in China which was named 'Japan-China Joint Coal Project Workshop: Environment/Production/Security.' Participants were 112 including 16 from Japan and 96 from China. Subjects were as follows: subjects on coal resource and technical strategy in the 21st century, technical exchange project and technical development, Japan-China technical cooperation project, report on the operational situation of China Coal Industry Environmental Preservation Safety Training Center, Japan-China Joint Project on spontaneous combustion prevention technology, CMG recovery/utilization system joint demonstration project, Japan-China joint coal exploration project, Japan-China coal field geology joint exploration project, etc. (NEDO)

Establishing Ozone Critical Levels II. UNECE Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Per Erik; Sellden, Gun; Pleijel, Haakan [eds.

2003-06-01

This document is the final report from the workshop. It contains the overall summary of the conclusions from the workshop, the reports from the three working groups that were active during the workshop as well as all background papers presented at the workshop.

Skin Microbiota Workshop: Multidisciplinary Perspectives, Challenges and Opportunities

Science.gov (United States)

2014-12-08

SECURITY CLASSIFICATION OF: This report details the outcome of the 1st Skin Microbiota Workshop, Boulder, CO, held on October 15th-16th 2012. The...Sep-2014 Approved for Public Release; Distribution Unlimited Final Report: Skin Microbiota Workshop: Multidisciplinary Perspectives, Challenges and...Number of Papers published in peer-reviewed journals: Number of Papers published in non peer-reviewed journals: Final Report: Skin Microbiota Workshop

N Reactor Lessons Learned workshop

International Nuclear Information System (INIS)

Heaberlin, S.W.

1993-07-01

This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

Insider Threat Mitigation Workshop Instructional Materials

Energy Technology Data Exchange (ETDEWEB)

Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O' Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rodriquez, Jose [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2008-01-01

Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt theft of nuclear materials. This report is a compilation of workshop materials consisting of lectures on technical and administrative measures used in Physical Protection (PP) and Material Control and Accounting (MC&A) and methods for analyzing their effectiveness against a postulated insider threat.

Proceedings of the CNRA/CSNI workshop on steam generator tube integrity in nuclear power plants

International Nuclear Information System (INIS)

Diercks, D.R.

1997-02-01

The objective of the workshop was to provide a working forum for the exchange of information by contributing experts on current issues related to PWR steam generator tube integrity. One hundred persons from 15 countries attended the workshop, including 36 from regulatory and nuclear policy agencies, 28 from research and development laboratories, 18 from nuclear vendors and consulting firms, and 18 from electrical utilities. The workshop opened with a plenary session; the first part of the session covered international steam generator regulatory practices and issues, featuring speakers from regulatory bodies in Belgium, France, Japan, Spain, and the US. In Part 2 of the plenary session, comprehensive technical overviews on steam generator tubing degradation, inspection, and integrity were presented by authorities in these fields from the US, France, and Belgium. Parallel working sessions on the second and third days of the workshop then developed findings and recommendations in the areas of (1) tubing degradation, (2) tubing inspection, (3) tubing integrity, (4) preventative and corrective measures, and (5) operational aspects and risk analysis. On the final day of the workshop, the working-session facilitators presented summaries of their sessions to the workshop attendees. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Proceedings of the CNRA/CSNI workshop on steam generator tube integrity in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Diercks, D.R. [Argonne National Lab., IL (United States)

1997-02-01

The objective of the workshop was to provide a working forum for the exchange of information by contributing experts on current issues related to PWR steam generator tube integrity. One hundred persons from 15 countries attended the workshop, including 36 from regulatory and nuclear policy agencies, 28 from research and development laboratories, 18 from nuclear vendors and consulting firms, and 18 from electrical utilities. The workshop opened with a plenary session; the first part of the session covered international steam generator regulatory practices and issues, featuring speakers from regulatory bodies in Belgium, France, Japan, Spain, and the US. In Part 2 of the plenary session, comprehensive technical overviews on steam generator tubing degradation, inspection, and integrity were presented by authorities in these fields from the US, France, and Belgium. Parallel working sessions on the second and third days of the workshop then developed findings and recommendations in the areas of (1) tubing degradation, (2) tubing inspection, (3) tubing integrity, (4) preventative and corrective measures, and (5) operational aspects and risk analysis. On the final day of the workshop, the working-session facilitators presented summaries of their sessions to the workshop attendees. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Documentation of the workshop on R and D and application of seismic emergency information system

International Nuclear Information System (INIS)

2000-07-01

This report describes the summary of the workshop on R and D and application of Seismic Emergency Information System (SEIS) organized by Japan Atomic Energy Research Institute (JAERI) and National Research Institute for Earth Science and Disaster Prevention (NIED) held on December 20, 1999. Documents presented in the workshop are attached. The workshop consists of the following five technical sessions. - Session I: Objectives of Workshop, - Session II: Progress of R and D of SEIS, - Session III: Current status of application of Seismic Information Systems, - Session IV: Free-discussion for issues and future prospects of Information Systems, - Session V: Briefing, Subsequently to the introduction of objectives of the workshop, the four topics on the progress of R and D of the seismic information system were presented by JAERI and NIED. The discussions are summarized in three viewpoints, i.e.; utilization of the potential of JAERI activities to the R and D, clarification on the objectives and philosophy of the system, effective utilization of the result of R and D. In addition, the current status on the application of seismic information systems was presented by staffs of local government and etc. Issues and future prospects of the information systems were discussed. The workshop was summarized in the final session. (author)

Infrasound workshop for CTBT monitoring: Proceedings

International Nuclear Information System (INIS)

Christie, D.; Whitaker, R.

1998-01-01

It is expected that the establishment of new infrasound stations in the global IMS network by the Provisional Technical Secretariat of the CTBTO in Vienna will commence in the middle of 1998. Thus, decisions on the final operational design for IMS infrasound stations will have to be made within the next 12 months. Though many of the basic design problems have been resolved, it is clear that further work needs to be carried out during the coming year to ensure that IMS infrasound stations will operate with maximum capability in accord with the specifications determined during the May 1997 PrepCom Meeting. Some of the papers presented at the Workshop suggest that it may be difficult to design a four-element infrasound array station that will reliably detect and locate infrasound signals at all frequencies in the specified range from 0.02 to 4.0 Hz in all noise environments. Hence, if the basic design of an infrasound array is restricted to four array elements, the final optimized design may be suited only to the detection and location of signals in a more limited pass-band. Several participants have also noted that the reliable discrimination of infrasound signals could be quite difficult if the detection system leads to signal distortion. Thus, it has been emphasized that the detection system should not, if possible, compromise signal fidelity. This report contains the workshop agenda, a list of participants, and abstracts and viewgraphs from each presentation

Infrasound workshop for CTBT monitoring: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Christie, D.; Whitaker, R.

1998-11-01

It is expected that the establishment of new infrasound stations in the global IMS network by the Provisional Technical Secretariat of the CTBTO in Vienna will commence in the middle of 1998. Thus, decisions on the final operational design for IMS infrasound stations will have to be made within the next 12 months. Though many of the basic design problems have been resolved, it is clear that further work needs to be carried out during the coming year to ensure that IMS infrasound stations will operate with maximum capability in accord with the specifications determined during the May 1997 PrepCom Meeting. Some of the papers presented at the Workshop suggest that it may be difficult to design a four-element infrasound array station that will reliably detect and locate infrasound signals at all frequencies in the specified range from 0.02 to 4.0 Hz in all noise environments. Hence, if the basic design of an infrasound array is restricted to four array elements, the final optimized design may be suited only to the detection and location of signals in a more limited pass-band. Several participants have also noted that the reliable discrimination of infrasound signals could be quite difficult if the detection system leads to signal distortion. Thus, it has been emphasized that the detection system should not, if possible, compromise signal fidelity. This report contains the workshop agenda, a list of participants, and abstracts and viewgraphs from each presentation.

Safety of Long-term Interim Storage Facilities - Workshop Proceedings

International Nuclear Information System (INIS)

2014-01-01

The objective of this workshop was to discuss and review current national activities, plans and regulatory approaches for the safety of long term interim storage facilities dedicated to spent nuclear fuel (SF), high level waste (HLW) and other radioactive materials with prolonged storage regimes. It was also intended to discuss results of experiments and to identify necessary R and D to confirm safety of fuel and cask during the long-term storage. Safety authorities and their Technical Support Organisation (TSO), Fuel Cycle Facilities (FCF) operating organisations and international organisations were invited to share information on their approaches, practices and current developments. The workshop was organised in an opening session, three technical sessions, and a conclusion session. The technical sessions were focused on: - National approaches for long term interim storage facilities; - Safety requirements, regulatory framework and implementation issues; - Technical issues and operational experience, needs for R and D. Each session consisted of a number of presentations followed by a panel discussion moderated by the session Chairs. A summary of each session and subsequent discussion that ensued are provided as well as a summary of the results of the workshop with the text of the papers given and presentations made

Twentieth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

1995-01-26

PREFACE The Twentieth Workshop on Geothermal Reservoir Engineering, dedicated to the memory of Professor Hank Ramey, was held at Stanford University on January 24-26, 1995. There were ninety-five registered participants. Participants came from six foreign countries: Japan, Mexico, England, Italy, New Zealand and Iceland. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors to the campus. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Thirty-two papers were presented in the technical sessions of the workshop. Technical papers were organized into eleven sessions concerning: field development, modeling, well tesubore, injection, geoscience, geochemistry and field operations. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bob Fournier, Mark Walters, John Counsil, Marcelo Lippmann, Keshav Goyal, Joel Renner and Mike Shook. In addition to the technical sessions, a panel discussion was held on ''What have we learned in 20 years?'' Panel speakers included Patrick Muffler, George Frye, Alfred Truesdell and John Pritchett. The subject was further discussed by Subir Sanyal, who gave the post-dinner speech at the banquet. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager

High energy physics research. Final technical report, 1957--1994

International Nuclear Information System (INIS)

Williams, H.H.

1995-01-01

This is the final technical report to the Department of Energy on High Energy Physics at the University of Pennsylvania. It discusses research conducted in the following areas: neutrino astrophysics and cosmology; string theory; electroweak and collider physics; supergravity; cp violation and baryogenesis; particle cosmology; collider detector at Fermilab; the sudbury neutrino observatory; B-physics; particle physics in nuclei; and advanced electronics and detector development

High energy physics research. Final technical report, 1957--1994

Energy Technology Data Exchange (ETDEWEB)

Williams, H.H.

1995-10-01

This is the final technical report to the Department of Energy on High Energy Physics at the University of Pennsylvania. It discusses research conducted in the following areas: neutrino astrophysics and cosmology; string theory; electroweak and collider physics; supergravity; cp violation and baryogenesis; particle cosmology; collider detector at Fermilab; the sudbury neutrino observatory; B-physics; particle physics in nuclei; and advanced electronics and detector development.

Approaching Technical Issues in Architectural Education

DEFF Research Database (Denmark)

Pugnale, Alberto; Parigi, Dario

2012-01-01

This paper discusses teaching of technical subjects in architecture, presenting two experimental activities, recently organized at Aalborg University - a two week long workshop and a one day long lecture. From the pedagogical point of view, the activities are strategically placed between conventi......This paper discusses teaching of technical subjects in architecture, presenting two experimental activities, recently organized at Aalborg University - a two week long workshop and a one day long lecture. From the pedagogical point of view, the activities are strategically placed between...

Out Brief for the Structural Reliability Partnership Workshop

Energy Technology Data Exchange (ETDEWEB)

Boyce, Brad [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fang, Eliot [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kolski, Alyssa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zimmerman, Jonathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Furmanski, Jevan [Exxon Mobil, Annandale, NJ (United States); Ravi-Chandar, Krishnaswamy [Univ. of Texas, Austin, TX (United States)

2017-08-30

The Structural Reliability Partnership Workshop was held in Albuquerque, NM on August 29-30, 2017 and was hosted by Sandia National Laboratories. Attendees were present from academia, industry and several other national laboratories. The workshop kicked off with an introduction to the SRP to familiarize potential members with what the purpose, structure and benefits would be to their organization. Technical overviews were given on several topics by attendees from each sector – national labs, universities and industry – to provide a snapshot of the type of work that is currently being conducted on structural reliability. Attendees were then given the opportunity to suggest and discuss potential Challenge Scenario topics. Three were ultimately decided upon as being the most important: Additive Manufacturing, Hydrogen Pipeline Steels, and Bolted Joined Structures. These were then analyzed using Quad Charts to determine What, How, Who, and Why these areas would be further investigated. Rather than restricting future research to only one area, the option was left open to investigate both the top two, depending on interest and cost associated with hosting such an event. More informal collaboration may be undertaken for the third topic if members have time and interest. Other items discussed pertained to the organization, structure and policies of the Partnership. Topics including Data Management, IP, and mechanisms of partnering/information sharing were touched upon but final decisions were not made. Further action is needed before this can be done. Action items were outlined and assigned, where possible. The next workshop is to be held in early August 2018 in Boulder, CO and is to be hosted by NIST. In the interim, quarterly updates are to take place via WebEx to maintain a line of communication and to ensure progress on both the administrative and technical tasks.

Universal Interconnection Technology Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Sheaffer, P.; Lemar, P.; Honton, E. J.; Kime, E.; Friedman, N. R.; Kroposki, B.; Galdo, J.

2002-10-01

The Universal Interconnection Technology (UIT) Workshop - sponsored by the U.S. Department of Energy, Distributed Energy and Electric Reliability (DEER) Program, and Distribution and Interconnection R&D - was held July 25-26, 2002, in Chicago, Ill., to: (1) Examine the need for a modular universal interconnection technology; (2) Identify UIT functional and technical requirements; (3) Assess the feasibility of and potential roadblocks to UIT; (4) Create an action plan for UIT development. These proceedings begin with an overview of the workshop. The body of the proceedings provides a series of industry representative-prepared papers on UIT functions and features, present interconnection technology, approaches to modularization and expandability, and technical issues in UIT development as well as detailed summaries of group discussions. Presentations, a list of participants, a copy of the agenda, and contact information are provided in the appendices of this document.

Technical Report on NETL's Non Newtonian Multiphase Slurry Workshop: A path forward to understanding non-Newtonian multiphase slurry flows

Energy Technology Data Exchange (ETDEWEB)

Guenther, Chris [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Garg, Rahul [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

2013-08-19

The Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) sponsored a workshop on non-Newtonian multiphase slurry at NETL’s Morgantown campus August 19 and 20, 2013. The objective of this special two-day meeting of 20-30 invited experts from industry, National Labs and academia was to identify and address technical issues associated with handling non-Newtonian multiphase slurries across various facilities managed by DOE. Particular emphasis during this workshop was placed on applications managed by the Office of Environmental Management (EM). The workshop was preceded by two webinars wherein personnel from ORP and NETL provided background information on the Hanford WTP project and discussed the critical design challenges facing this project. In non-Newtonian fluids, viscosity is not constant and exhibits a complex dependence on applied shear stress or deformation. Many applications under EM’s tank farm mission involve non-Newtonian slurries that are multiphase in nature; tank farm storage and handling, slurry transport, and mixing all involve multiphase flow dynamics, which require an improved understanding of the mechanisms responsible for rheological changes in non-Newtonian multiphase slurries (NNMS). To discuss the issues in predicting the behavior of NNMS, the workshop focused on two topic areas: (1) State-of-the-art in non-Newtonian Multiphase Slurry Flow, and (2) Scaling up with Confidence and Ensuring Safe and Reliable Long-Term Operation.

Technical approach to finalizing sensible soil cleanup levels at the Fernald Environmental Management Project

International Nuclear Information System (INIS)

Carr, D.; Hertel, B.; Jewett, M.; Janke, R.; Conner, B.

1996-01-01

The remedial strategy for addressing contaminated environmental media was recently finalized for the US Department of Energy's (DOE) Fernald Environmental Management Project (FEMP) following almost 10 years of detailed technical analysis. The FEMP represents one of the first major nuclear facilities to successfully complete the Remedial Investigation/Feasibility Study (RI/FS) phase of the environmental restoration process. A critical element of this success was the establishment of sensible cleanup levels for contaminated soil and groundwater both on and off the FEMP property. These cleanup levels were derived based upon a strict application of Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) regulations and guidance, coupled with positive input from the regulatory agencies and the local community regarding projected future land uses for the site. The approach for establishing the cleanup levels was based upon a Feasibility Study (FS) strategy that examined a bounding range of viable future land uses for the site. Within each land use, the cost and technical implications of a range of health-protective cleanup levels for the environmental media were analyzed. Technical considerations in driving these cleanup levels included: direct exposure routes to viable human receptors; cross- media impacts to air, surface water, and groundwater; technical practicality of attaining the levels; volume of affected media; impact to sensitive environmental receptors or ecosystems; and cost. This paper will discuss the technical approach used to support the finalization of the cleanup levels for the site. The final cleanup levels provide the last remaining significant piece to the puzzle of establishing a final site-wide remedial strategy for the FEMP, and positions the facility for the expedient completion of site-wide remedial activities

Application of workshop oriented with new trends of teaching to technical course in chemistry: a partnership between university and public school

Directory of Open Access Journals (Sweden)

Marilde Beatriz Zorzi Sá

2013-08-01

Full Text Available With purpose to provide better training to citizens who have completed high school and they need better training to join the labor market, was created following courses, among them the Technical Course in Chemistry (CTQ. The structure consists of a formation that coordinates work, culture, science and technology as principles that summarize the training process whole. On a visit a public school in Maringá (PR, which implemented the CTQ, it was found that teachers were faced with several difficulties: lack of knowledge in technical skills early, how to articulate theory and practice, shortages of materials and reference theoretical, limitation of laboratories, lack of equipment and difficulties in developing practical activities for the course. Faced with this situation had the idea of support for these teachers and consequently their students. Thus, a group of academics after carry a survey in school in order to known the reality of the course and aspirations of students and teachers, it was developed a workshop with theme generator about the “milk”. These academics develop low-cost materials in aiding the practice of teachers. In addition, further research was conducted to check the results of the activity with the purpose of developing a new workshop looking for teaching strategies to contribute effectively to the course.

Audit of Wolf Creek Generating Station, Unit 1 technical specifications. Final technical evaluation report

International Nuclear Information System (INIS)

Stromberg, H.M.

1985-07-01

This document was prepared for the Nuclear Regulatory Commission (NRC) to assist them in determining whether the Wolf Creek Generating Station Unit 1 Technical Specifications (T/S), which govern plant systems configurations and operations, are in conformance with the assumptions of the Final Safety Analysis Report (FSAR) as amended, the requirements of the Safety Evaluation Report (SER) as supplemented, and the Comments and Responses to the Wolf Creek Technical Specification Draft Inspection Report. A comparative audit of the FSAR as amended, the SER as supplemented, and the Draft Inspection Report was performed with the Wolf Creek T/S. Several discrepancies were identified and subsequently resolved through discussions with the cognizant NRC reviewer, NRC staff reviewers and/or utility representatives. The Wolf Creek Generating Station Unit 1 T/S, to the extent reviewed, are in conformance with the FSAR, SER, and Draft Inspection Report

ISEE-magnetopause observations - workshop results

International Nuclear Information System (INIS)

Paschmann, G.

1982-01-01

A brief history of ISEE magnetopause workshops held during 1977-1981 is presented, and an assessment of the activity of these workshops is made. Workshop results are surveyed, with attention given to magnetopause thickness and speed, large-scale reconnection, small-scale reconnection, magnetic field topology, plasma waves, boundary layer structure, surface waves, plasma origin, and the relationship between magnetopause and particle boundaries. Finally, a few topics that require particular attention in the future are mentioned

Optical Science: Deploying Technical Concepts and Engaging Participation through Digital Storytelling

Science.gov (United States)

Thomas, R. G.; Berry, K.; Arrigo, J.; Hooper, R. P.

2013-12-01

Technical 'hands-on' training workshops are designed to bring together scientists, technicians, and program managers from universities, government agencies, and the private sector to discuss methods used and advances made in instrumentation and data analysis. Through classroom lectures and discussions combined with a field-day component, hands-on workshop participants get a 'full life cycle' perspective from instrumentation concepts and deployment to data analysis. Using film to document this process is becoming increasingly more popular, allowing scientists to add a story-telling component to their research. With the availability of high-quality and low priced professional video equipment and editing software, scientists are becoming digital storytellers. The science video developed from the 'hands-on' workshop, Optical Water Quality Sensors for Nutrients: Concepts, Deployment, and Analysis, encapsulates the objectives of technical training workshops for participants. Through the use of still photography, video, interviews, and sound, the short video, An Introduction to CUAHSI's Hands-on Workshops, produced by a co-instructor of the workshop acts as a multi-purpose tool. The 10-minute piece provides an overview of workshop field day activities and works to bridge the gap between classroom learning, instrumentation application and data analysis. CUAHSI 'hands-on' technical workshops have been collaboratively executed with faculty from several universities and with the U.S. Geological Survey. The video developed was designed to attract new participants to these professional development workshops, to stimulate a connection with the environment, to act as a workshop legacy resource, and also serve as a guide for prospective hands-on workshop organizers. The effective use of film and short videos in marketing scientific programs, such as technical trainings, allows scientists to visually demonstrate the technologies currently being employed and to provide a more

78 FR 12955 - Final Requirements, Definitions, and Selection Criteria-Native American Career and Technical...

Science.gov (United States)

2013-02-26

... career and technical education programs (20 U.S.C. 2326(e)). This notice does not preclude us from... DEPARTMENT OF EDUCATION 34 CFR Chapter IV [Docket ID ED-2012-OVAE-0053] Final Requirements, Definitions, and Selection Criteria--Native American Career and Technical Education Program (NACTEP) [Catalog...

Hydro operational restrictions forum: Licensee workshop summary. Final report

International Nuclear Information System (INIS)

Ebrahim, S.; Monahan, C.K.; Pistor, B.; West, A.

1998-08-01

In spite of producing no atmospheric pollutants, hydroelectric power plants often go unrecognized as a unique provider of clean, efficient, low-cost energy. A concerted effort is needed to ensure that these attributes are fully accounted for when considering the uses and benefits of available water resources. Relicensing reviews and other regulatory activities associated with continued operation of hydro generation projects have drawn increased attention to hydro resources. This attention has typically resulted in imposition of conditions having a substantial cost impact without, necessarily, reflecting a full appreciation of the resource's benefits and attributes. With the extensive countrywide effort in relicensing and regulation, there is an opportunity to collect and compile lessons learned. This is particularly true with respect to preferred practices, technologies, and techniques applicable to required studies and mitigation measures. Such compilation will enable the industry and related stakeholders to improve quality and effectiveness while reducing costs of relicensing and mitigation for continued hydro operations. As a technology leader for the industry, EPRI is in a unique position to identify and document these techniques and practices. This report comprises the proceedings of the hydro licensees workshop. Fifteen licensee representatives with recent or current involvement in the relicensing process gathered at this workshop and shared their experiences, both good and bad. Support was strong among attendees for EPRI's effort to collect and compile these, along with the experiences of others, into a guidebook of accepted practices. Initial workshop findings were used in the second workshop to solicit buy-in from agencies and NGOs to the need for--as well as proposed scope of--a compendium of preferred practices

CARE-HHH-APD Workshop on Finalizing the Roadmap for the Upgrade of the CERN and GSI Accelerator Complex

CERN Document Server

Zimmermann, Frank; BEAM'07; BEAM 2007; Finalizing the Roadmap for the Upgrade of the LHC and GSI Accelerator Complex

2008-01-01

This report contains the Proceedings of the CARE-HHH-APD Event BEAM’07, “Finalizing the Roadmap for the Upgrade of the CERN & GSI Accelerator Complex,” which was held at CERN in Geneva, Switzerland, from 1 to 5 October 2007. BEAM’07 was primarily devoted to beam dynamics limitations for the two, or three, alternative baseline scenarios of the LHC luminosity upgrade and to critical design choices for the upgrade of the LHC injector complex at CERN and for the FAIR complex at GSI. It comprised five parts: (1) a Mini-Workshop on LHC+ Beam Performance, (2) a CERN-GSI Meeting on Collective Effects, (3) the Francesco Ruggiero Memorial Symposium, (4) a Mini-Workshop on the LHC Injectors Upgrade, and (5) the BEAM’07 Summaries. Topics addressed in the first mini-workshop of BEAM’07 ranged from the luminosity performance reach of the upgraded LHC in different scenarios, over the generation and stability of the future LHC beams, the turnaround time, beam–beam effects, luminosity levelling methods, and ...

Technical planning activity: Final report

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

Technical planning activity: Final report

International Nuclear Information System (INIS)

1987-01-01

In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements

Technical area status report for low-level mixed waste final waste forms. Volume 1

Energy Technology Data Exchange (ETDEWEB)

Mayberry, J.L.; DeWitt, L.M. [Science Applications International Corp., Idaho Falls, ID (United States); Darnell, R. [EG and G Idaho, Inc., Idaho Falls, ID (United States)] [and others

1993-08-01

The Final Waste Forms (FWF) Technical Area Status Report (TASR) Working Group, the Vitrification Working Group (WG), and the Performance Standards Working Group were established as subgroups to the FWF Technical Support Group (TSG). The FWF TASR WG is comprised of technical representatives from most of the major DOE sites, the Nuclear Regulatory Commission (NRC), the EPA Office of Solid Waste, and the EPA`s Risk Reduction Engineering Laboratory (RREL). The primary activity of the FWF TASR Working Group was to investigate and report on the current status of FWFs for LLNM in this TASR. The FWF TASR Working Group determined the current status of the development of various waste forms described above by reviewing selected articles and technical reports, summarizing data, and establishing an initial set of FWF characteristics to be used in evaluating candidate FWFS; these characteristics are summarized in Section 2. After an initial review of available information, the FWF TASR Working Group chose to study the following groups of final waste forms: hydraulic cement, sulfur polymer cement, glass, ceramic, and organic binders. The organic binders included polyethylene, bitumen, vinyl ester styrene, epoxy, and urea formaldehyde. Section 3 provides a description of each final waste form. Based on the literature review, the gaps and deficiencies in information were summarized, and conclusions and recommendations were established. The information and data presented in this TASR are intended to assist the FWF Production and Assessment TSG in evaluating the Technical Task Plans (TTPs) submitted to DOE EM-50, and thus provide DOE with the necessary information for their FWF decision-making process. This FWF TASR will also assist the DOE and the MWIP in establishing the most acceptable final waste forms for the various LLMW streams stored at DOE facilities.

Site selection handbook: Workshop on site selection for low-level radioactive waste disposal facilities

International Nuclear Information System (INIS)

1987-10-01

The Low-Level Radioactive Waste Policy Amendments Act of 1985 (LLRWPAA) requires the Department of Energy (DOE) to provide technical assistance to ''...those compact regions, host States and nonmember States determined by the Secretary to require assistance.'' Technical assistance has been defined to include, but not be limited to, ''technical guidelines for site selection.'' This site selection workshop was developed to assist States and Compacts in developing new low-level radioactive waste (LLW) disposal sites in accordance with the requirements of the LLRWPAA. The workshop comprises a series of lectures, discussion topics, and exercises, supported by this Site Selection Workshop Handbook, designed to examine various aspects of a comprehensive site selection program. It is not an exhaustive treatment of all aspects of site selection, nor is it prescriptive. The workshop focuses on the major elements of site selection and the tools that can be used to implement the site selection program

FINPIE/97. Workshop proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

This publication contains the proceedings of 1997 Finnish Workshop on Power and Industrial Electronics, held in Espoo, Finland, on 26 August, 1997. The programme consisted of technical sessions on Advanced AC Motor Control, Electric Machines and Drives, Advanced Control and Measurement, Power Electronics Systems, Modelling and Simulation, and Power Converters

77 FR 30512 - Native American Career and Technical Education Program; Final Waivers and Extension of Project...

Science.gov (United States)

2012-05-23

... DEPARTMENT OF EDUCATION Native American Career and Technical Education Program; Final Waivers and... American Career and Technical Education Program Catalog of Federal Domestic Assistance (CFDA) Number: 84... and Technical Education Program (NACTEP), the Secretary waives 34 CFR 75.250 and 75.261(c)(2) in order...

Proceedings of the joint CSNI/CNRA workshop on redefining the large break LOCA: technical basis and its implications

International Nuclear Information System (INIS)

2003-01-01

The objective of the Workshop was to facilitate an exchange of information on a topic, which could potentially impact both the operation of current reactors and the design of future reactors. A number of OECD countries were actively working in this area at the moment. Regulators, Researchers and Industry representatives needed to exchange information on the current regulation and technical issues associated with the Large Break LOCA (LB-LOCA), and to further discuss rationales and motives which could lead to a redefinition of the LB- LOCA. The focus was on design and safety implications. Policy issues were not discussed but the workshop provided technical inputs for policy makers. The workshop covered different reactor designs (CANDUs, VVERs, LWRs). The workshop was articulated over three questions: 1. What drives the need to redefine the LB-LOCA? There was a consensus on well founded drivers for the redefinition and on observations that, if the change is made right, it can enhance the safety of nuclear power plants and also reduce the costs of power production. Three papers were presented. In the first paper, Mr Bajorek (USNRC) discussed the redefinition of the LB-LOCA in the context of risk informing their regulations. Mr. Bajorek emphasised that redefining LB-LOCA is being considered by US NRC from a risk perspective to improve the safety focus and that regulators should better focus on safety and risk contributors and thereby formulate the regulations to better use available resources. He added that the present LOCA definition has not only a great impact on the plant design but also on operating limits according to the Technical Specifications as well as on testing conditions. In the second paper, Mr Pietrangelo (NEI, USA) presented a paper on the need to redefine the large break LOCA from the industrial viewpoints. He emphasised that the strong leadership commitments by both NRC and industry are necessary, and that redefining LB- LOCA is central to risk

EDITORIAL: Selected papers from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011) Selected papers from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011)

Science.gov (United States)

Cho, Young-Ho

2012-09-01

This special section of Journal of Micromechanics and Microengineering features papers selected from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011), held at Sejong Hotel in Seoul, Korea during 15-18 November 2011. Since the first PowerMEMS workshop held in Sendai, Japan in 2000, the workshop has developed as the premier forum for reporting research results in micro and nanotechnology for power generation, energy conversion, harvesting and processing applications, including in-depth technical issues on nanostructures and materials for small-scale high-density energy and thermal management. Potential PowerMEMS applications cover not only portable power devices for consumer electronics and remote sensors, but also micro engines, impulsive thrusters and fuel cells for systems ranging from the nanometer to the millimeter scale. The 2011 technical program consists of 1 plenary talk, 4 invited talks and 118 contributed presentations. The 48 oral and 70 poster presentations, selected by 27 Technical Program Committee Members from 131 submitted abstracts, have stimulated lively discussion maximizing the interaction between participants. Among them, this special section includes 9 papers covering micro-scale power generators, energy converters, harvesters, thrusters and thermal coolers. Finally, we are grateful to the members of the International Steering Committee, the Technical Program Committee, and the Local Organizing Committee for their efforts and contributions to PowerMEMS 2011. We also thank the two companies Samsung Electro-Mechanics and LG Elite for technical tour arrangements. Special thanks go to Dr Ian Forbes, the editorial staff of the Journal of Micromechanics and Microengineering, as well as to the staff of IOP Publishing for making this special section possible.

Proceedings of the workshop on review of dose modeling methods for demonstration of compliance with the radiological criteria for license termination

International Nuclear Information System (INIS)

Nicholson, T.J.; Parrott, J.D.

1998-05-01

The workshop was one in a series to support NRC staff development of guidance for implementing the final rule on ''Radiological Criteria for License Termination.'' The workshop topics included discussion of: dose models used for decommissioning reviews; identification of criteria for evaluating the acceptability of dose models; and selection of parameter values for demonstrating compliance with the final rule. The 2-day public workshop was jointly organized by RES and NMSS staff responsible for reviewing dose modeling methods used in decommissioning reviews. The workshop was noticed in the Federal Register (62 FR 51706). The workshop presenters included: NMSS and RES staff, who discussed both dose modeling needs for licensing reviews, and development of guidance related to dose modeling and parameter selection needs; DOE national laboratory scientists, who provided responses to earlier NRC staff-developed questions and discussed their various Federally-sponsored dose models (i.e., DandD, RESRAD, and MEPAS codes); and an EPA scientist, who presented details on the EPA dose assessment model (i.e., PRESTO code). The workshop was formatted to provide opportunities for the attendees to observe computer demonstrations of the dose codes presented. More than 120 workshop attendees from NRC Headquarters and the Regions, Agreement States; as well as industry representatives and consultants; scientists from EPA, DOD, DNFSB, DOE, and the national laboratories; and interested members of the public participated. A complete transcript of the workshop, including viewgraphs and attendance lists, is available in the NRC Public Document Room. This NUREG/CP documents the formal presentations made during the workshop, and provides a preface outlining the workshop's focus, objectives, background, topics and questions provided to the invited speakers, and those raised during the panel discussion. NUREG/CP-0163 also provides technical bases supporting the development of decommissioning

12th International workshop on Inelastic Ion-Surface Collisions.Final report

International Nuclear Information System (INIS)

Rabalais, J.W.; Nordlander, P.

1999-01-01

The twelfth international workshop on inelastic ion surface collisions was held at the Bahia Mar Resort and Conference Center on South Padre Island, Texas (USA) from January 24-29, 1999. The workshop brought together most of the leading researchers from around the world to focus on both the theoretical and experimental aspects of particle - surface interactions and related topics

Proceedings of the 1981 subseabed disposal program. Annual workshop

International Nuclear Information System (INIS)

1982-01-01

The 1981 Annual Workshop was the twelfth meeting of the principal investigators and program management personnel participating in the Subseabed Disposal Program (SDP). The first workshop was held in June 1973, to address the development of a program (initially known as Ocean Basin Floors Program) to assess the deep sea disposal of nuclear wastes. Workshops were held semi-annually until late 1977. Since November 1977, the workshops have been conducted following the end of each fiscal year so that the program participants could review and critique the total scope of work. This volume contains a synopsis, as given by each Technical Program Coordinator, abstracts of each of the talks, and copies of the visual materials, as presented by each of the principal investigators, for each of the technical elements of the SDP for the fiscal year 1981. The talks were grouped under the following categories; general topics; site studies; thermal response studies; emplacement studies; systems analysis; chemical response studies; biological oceanography studies; physical oceanographic studies; instrumentation development; transportation studies; social environment; and international seabed disposal

Proceedings of the 1981 subseabed disposal program. Annual workshop

Energy Technology Data Exchange (ETDEWEB)

1982-01-01

The 1981 Annual Workshop was the twelfth meeting of the principal investigators and program management personnel participating in the Subseabed Disposal Program (SDP). The first workshop was held in June 1973, to address the development of a program (initially known as Ocean Basin Floors Program) to assess the deep sea disposal of nuclear wastes. Workshops were held semi-annually until late 1977. Since November 1977, the workshops have been conducted following the end of each fiscal year so that the program participants could review and critique the total scope of work. This volume contains a synopsis, as given by each Technical Program Coordinator, abstracts of each of the talks, and copies of the visual materials, as presented by each of the principal investigators, for each of the technical elements of the SDP for the fiscal year 1981. The talks were grouped under the following categories; general topics; site studies; thermal response studies; emplacement studies; systems analysis; chemical response studies; biological oceanography studies; physical oceanographic studies; instrumentation development; transportation studies; social environment; and international seabed disposal.

Effective Technology for Recycling Metal. Proceedings of Two Special Workshops.

Science.gov (United States)

National Association of Secondary Material Industries, Inc., New York, NY.

The National Association of Secondary Material Industries (NASMI) and the Bureau of Mines have cooperated to sponsor two technically-oriented workshops related to the role of metals recycling and air pollution control technology. The proceedings of these workshops, "Effective Technology and Research for Scrap Metal Recycling" and "Air Pollution…

Proceedings of the CNRA Workshop on New Reactor Siting, Licensing and Construction Experience

International Nuclear Information System (INIS)

2011-01-01

This report documents the proceedings from the 'Workshop on New Reactor Siting, Licensing and Construction Experience', held in Prague, Czech Republic on 15-17 September 2010. A total of 59 specialists from 16 countries and international organisations attended. The Meeting was sponsored by the OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities and hosted by the State Office for Nuclear Safety (SUJB) in Czech Republic. The objectives of the workshop were to review and discuss recent and past construction experience lessons learned including perspectives from regulatory authorities, as well as vendors, and licensee. The workshop addressed issues associated with project management resources including: a) overall human resources, expertise, experience and organisation available to the licensee, b) capability of each potential vendor (in-house knowledge and skills versus planned subcontracting and subcontractor management). The workshop also discussed the lessons learned in the regulation of site selection, evaluation and site preparation as well as the review of regulatory practices for the licensing of new reactors, including the regulatory body infrastructure, staffing and expertise needed. The workshop provided an excellent opportunity to communicate recent experience on these topics to a wider audience, including participants from OECD member countries as well as New Entrants from non-OECD member countries. The workshop allowed the WGRNR group to introduce and discuss the current programme of work and products under development in order to gain insights from workshop participants on each of the programme of work areas, and get feedback on additional focus areas. The workshop was structured in 4 technical sessions, each followed by ample time for panel discussions. The first technical session was devoted to presentations of the licensing process for new reactors followed by different member countries. The second technical session was

Review of design approaches of advanced pressurized LWRs. Report of a technical committee meeting and workshop

International Nuclear Information System (INIS)

1996-01-01

The Technical Committee Meeting and Workshop was devoted to review and discuss differences and commonalties in the various design approaches with the aim of increasing the understanding of the design decisions taken, and a number of general conclusions were drawn. Though many differences in design approaches were found in the presentations, a number of common features could also be identified. These included design approaches to achieve further improvements with respect to safety, design simplification, reduction in cost, incorporation of feedback from operating experience, and control room improvements regarding human factors and digitization. Design approaches to achieve further improvements in safety included consideration of severe accidents in the design process, increased thermal margins and water inventories, longer grace periods and double containments. Refs, figs and tabs

Review of design approaches of advanced pressurized LWRs. Report of a technical committee meeting and workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-01-01

The Technical Committee Meeting and Workshop was devoted to review and discuss differences and commonalties in the various design approaches with the aim of increasing the understanding of the design decisions taken, and a number of general conclusions were drawn. Though many differences in design approaches were found in the presentations, a number of common features could also be identified. These included design approaches to achieve further improvements with respect to safety, design simplification, reduction in cost, incorporation of feedback from operating experience, and control room improvements regarding human factors and digitization. Design approaches to achieve further improvements in safety included consideration of severe accidents in the design process, increased thermal margins and water inventories, longer grace periods and double containments. Refs, figs and tabs.

"Type Ia Supernovae: Tools for Studying Dark Energy" Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Woosley, Stan [Lick Observatory, San Jose, CA (United States); Kasen, Dan [Univ. of California, Berkeley, CA (United States)

2017-05-10

Final technical report for project "Type Ia Supernovae: Tools for the Study of Dark Energy" awarded jointly to scientists at the University of California, Santa Cruz and Berkeley, for computer modeling, theory and data analysis relevant to the use of Type Ia supernovae as standard candles for cosmology.

Photovoltaic performance and reliability workshop

Energy Technology Data Exchange (ETDEWEB)

Mrig, L. [ed.

1993-12-01

This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

Key technical issues associated with a method of pulse compression. Final technical report

International Nuclear Information System (INIS)

Hunter, R.O. Jr.

1980-06-01

Key technical issues for angular multiplexing as a method of pulse compression in a 100 KJ KrF laser have been studied. Environmental issues studied include seismic vibrations man-made vibrations, air propagation, turbulence, and thermal gradient-induced density fluctuations. These studies have been incorporated in the design of mirror mounts and an alignment system, both of which are reported. A design study and performance analysis of the final amplifier have been undertaken. The pulse compression optical train has been designed and assessed as to its performance. Individual components are described and analytical relationships between the optical component size, surface quality, damage threshold and final focus properties are derived. The optical train primary aberrations are obtained and a method for aberration minimization is presented. Cost algorithms for the mirrors, mounts, and electrical hardware are integrated into a cost model to determine system costs as a function of pulse length, aperture size, and spot size

The Michigan high-level radioactive waste program: Final technical progress report

International Nuclear Information System (INIS)

1987-01-01

This report comprises the state of Michigan's final technical report on the location of a proposed high-level radioactive waste disposal site. Included are a list of Michigan's efforts to review the DOE proposal and a detailed report on the application of geographic information systems analysis techniques to the review process

WPDD workshop on: 'safe, efficient, and cost-effective decommissioning'. Workshop Conclusions/Final Stocktaking

International Nuclear Information System (INIS)

2005-01-01

On September 6-10, 2004 a workshop on 'Safe, Efficient, and Cost-Effective Decommissioning' was held in Rome (Italy) to enable international experts on decommissioning to compare and evaluate respective approaches and experiences in decommissioning nuclear power and fuel cycle facilities and to formulate proposals for future international cooperation in the decommissioning arena. The main messages emerging from the workshop are: - Decommissioning is a mature industrial process and many projects have been safely completed with support of local communities. Technical and scientific issues are well-understood and practical experience and associated lessons are being documented to guide future activities. Emphasis is being placed on effective planning with active programmes of community involvement. - Individual countries need to further develop integrated decommissioning and waste management strategies to ensure that long-term solutions will be available for all wastes generated from decommissioning. National systems are evolving to meet national needs, against a framework provided by the international organisations, and these seem increasingly to favour early dismantling regardless of the availability of waste disposal routes. - Realistic and streamlined regulatory programmes are being developed with feed back from industry experience and are placing more responsibility and accountability on licensees. - Accurate decommissioning waste cost calculation methods is needed. Waste volumes may vary from project to project even for similar installations. There though appears to be a strong case for accumulating data and benchmarking costs for similar plants and processes. Further work and experience exchange on cost comparisons between different strategies (for example clearance and recycling/reuse of materials versus direct surface disposal) would be valuable. - International clearance criteria have been established, with individual countries free to adopt them

Final Technical Report, Wind Generator Project (Ann Arbor)

Energy Technology Data Exchange (ETDEWEB)

Geisler, Nathan [City of Ann Arbor, MI (United States)

2017-03-20

A Final Technical Report (57 pages) describing educational exhibits and devices focused on wind energy, and related outreach activities and programs. Project partnership includes the City of Ann Arbor, MI and the Ann Arbor Hands-on Museum, along with additional sub-recipients, and U.S. Department of Energy/Office of Energy Efficiency and Renewable Energy (EERE). Report relays key milestones and sub-tasks as well as numerous graphics and images of five (5) transportable wind energy demonstration devices and five (5) wind energy exhibits designed and constructed between 2014 and 2016 for transport and use by the Ann Arbor Hands-on Museum.

Summary of the workshop: towards 4π physics

International Nuclear Information System (INIS)

Ngo, C.

1985-12-01

This summary is not intended to give an extensive review of all what has been said during the three days about technics, experiments and theories. It will be rather a brief and simple overview of what I felt during the meeting while listening to the different talks, discussions and participating to the round tables which were also a very important part of the workshop and contributed a lot to its success. This summary will be organized as follows: in a first part I shall briefly describe the basic problems that one is faced with ''exclusive'' measurements. Finally, we shall briefly review some of the theoretical problems existing at intermediate bombarding energies since any experiment would initially rely heavily on theoretical considerations

Iowa Hill Pumped Storage Project Investigations - Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Hanson, David [Sacramento Municipal Unitlity District, Sacramento, CA (United States)

2016-07-01

This Final Technical Report is a summary of the activities and outcome of the Department of Energy (DOE) Assistance Agreement DE-EE0005414 with the Sacramento Municipal Utility District (SMUD). The Assistance Agreement was created in 2012 to support investigations into the Iowa Hill Pumped-storage Project (Project), a new development that would add an additional 400 MW of capacity to SMUD’s existing 688MW Upper American River Hydroelectric Project (UARP) in the Sierra Nevada mountains east of Sacramento, California.

Admiralty Inlet Pilot Tidal Project Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Collar, Craig [Public Utility District No. 1 of Snohomish County, Everett, WA (United States)

2015-09-14

This document represents the final report for the Admiralty Inlet Pilot Tidal Project, located in Puget Sound, Washington, United States. The Project purpose was to license, permit, and install a grid-connected deep-water tidal turbine array (two turbines) to be used as a platform to gather operational and environmental data on tidal energy generation. The data could then be used to better inform the viability of commercial tidal energy generation from technical, economic, social, and environmental standpoints. This data would serve as a critical step towards the responsible advancement of commercial scale tidal energy in the United States and around the world. In late 2014, Project activities were discontinued due to escalating costs, and the DOE award was terminated in early 2015. Permitting, licensing, and engineering design activities were completed under this award. Final design, deployment, operation, and monitoring were not completed. This report discusses the results and accomplishments achieved under the subject award.

77 FR 30514 - Native Hawaiian Career and Technical Education Program; Final Waiver and Extension of Project Period

Science.gov (United States)

2012-05-23

... DEPARTMENT OF EDUCATION Native Hawaiian Career and Technical Education Program; Final Waiver and... Career and Technical Education Program Catalog of Federal Domestic Assistance (CFDA) Number: 84.259A... Technical Education Program (NHCTEP), the Secretary hereby waives 34 CFR 75.261(c)(2) in order to extend the...

The Third ATLAS ROD Workshop

CERN Multimedia

Poggioli, L.

A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

Proceedings: 2nd IEA international workshop on beryllium technology for fusion

Energy Technology Data Exchange (ETDEWEB)

Longhurst, G.R.

1995-09-01

The 2nd IEA International Workshop on Beryllium Technology for Fusion was held September 6--8, 1995 at Jackson Lake Lodge, Wyoming. Forty-four participants took part in the workshop representing Europe, Japan, the Russian Federation, and the United States including representatives from both government laboratories and private industry. The workshop was divided into six technical sessions and a ``town meeting`` panel discussion. Technical sessions addressed the general topics of: Thermomechanical Properties; Manufacturing Technologies; Radiation Effects; Plasma/Tritium Interactions; Safety, Applications, and Design; and Joining and Testing. This volume contains the majority of the papers presented at the workshop. In some instances, the authors of the papers could not be present at the workshop, and the papers were given by others, sometimes in summary form and in some instances combined with others. The full papers are included here in the sequence in which they would have been given. In other instances, presentations were made but no papers were submitted for publication. Those papers do not appear here. In summary, the workshop was very successful. The main objectives of bringing key members of the fusion beryllium community together was certainly met. Forty-four participants registered, and 35 papers were presented. Individual papers are indexed separately on the energy data bases.

Proceedings: 2nd IEA international workshop on beryllium technology for fusion

International Nuclear Information System (INIS)

Longhurst, G.R.

1995-09-01

The 2nd IEA International Workshop on Beryllium Technology for Fusion was held September 6--8, 1995 at Jackson Lake Lodge, Wyoming. Forty-four participants took part in the workshop representing Europe, Japan, the Russian Federation, and the United States including representatives from both government laboratories and private industry. The workshop was divided into six technical sessions and a ''town meeting'' panel discussion. Technical sessions addressed the general topics of: Thermomechanical Properties; Manufacturing Technologies; Radiation Effects; Plasma/Tritium Interactions; Safety, Applications, and Design; and Joining and Testing. This volume contains the majority of the papers presented at the workshop. In some instances, the authors of the papers could not be present at the workshop, and the papers were given by others, sometimes in summary form and in some instances combined with others. The full papers are included here in the sequence in which they would have been given. In other instances, presentations were made but no papers were submitted for publication. Those papers do not appear here. In summary, the workshop was very successful. The main objectives of bringing key members of the fusion beryllium community together was certainly met. Forty-four participants registered, and 35 papers were presented. Individual papers are indexed separately on the energy data bases

Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Schuur, Edward [Northern Arizona Univ., Flagstaff, AZ (United States); Luo, Yiqi [Univ. of Oklahoma, Norman, OK (United States)

2016-12-01

This final grant report is a continuation of the final grant report submitted for DE-SC0006982 as the Principle Investigator (Schuur) relocated from the University of Florida to Northern Arizona University. This report summarizes the original project goals, as well as includes new project activities that were completed in the final period of the project.

Remote monitoring system workshop and technical cooperation

Energy Technology Data Exchange (ETDEWEB)

Kim, Jung Soo; Kwack, E. H.; Yoon, W. K.; Kim, J. S.; Cha, H. Y.; Na, W.W

2000-06-01

RMS workshop at the year focus on installing the material monioring system at technology lab. within TCNC. This system was developed by cooperative monitoring center(CMC) belonging to Sandia national lab. MMS consisted of data storage computer, data collection computer and easily connet to DCM-14 camera using monitoring the NPP by IAEA. The system run when the motion is catching and stroes the event data to MMS server. Also, the system communicate with the internet and then they access to check the event data only if the authencated person.

Remote monitoring system workshop and technical cooperation

International Nuclear Information System (INIS)

Kim, Jung Soo; Kwack, E. H.; Yoon, W. K.; Kim, J. S.; Cha, H. Y.; Na, W.W.

2000-06-01

RMS workshop at the year focus on installing the material monioring system at technology lab. within TCNC. This system was developed by cooperative monitoring center(CMC) belonging to Sandia national lab. MMS consisted of data storage computer, data collection computer and easily connet to DCM-14 camera using monitoring the NPP by IAEA. The system run when the motion is catching and stroes the event data to MMS server. Also, the system communicate with the internet and then they access to check the event data only if the authencated person

Metrics for Objective Assessment of Surgical Skills Workshop

National Research Council Canada - National Science Library

Satava, Richard

2001-01-01

On 9-10 July, 2001 the Metrics for Objective Assessment of Surgical Skills Workshop convened an international assemblage of subject matter experts in objective assessment of surgical technical skills...

Proceedings of the flexible, midsize gas turbine program planning workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The US Department of Energy (DOE) and the California Energy Commission (CEC) held a program planning workshop on March 4--5, 1997 in Sacramento, California on the subject of a flexible, midsize gas turbine (FMGT). The workshop was also co-sponsored by the Electric Power Research Institute (EPRI), the Gas Research Institute (GRI), the Gas Turbine Association (GTA), and the Collaborative Advanced Gas Turbine Program (CAGT). The purpose of the workshop was to bring together a broad cross section of knowledgeable people to discuss the potential benefits, markets, technical attributes, development costs, and development funding approaches associated with making this new technology available in the commercial marketplace. The participants in the workshop included representatives from the sponsoring organizations, electric utilities, gas utilities, independent power producers, gas turbine manufacturers, gas turbine packagers, and consultants knowledgeable in the power generation field. Thirteen presentations were given on the technical and commercial aspects of the subject, followed by informal breakout sessions that dealt with sets of questions on markets, technology requirements, funding sources and cost sharing, and links to other programs.

Report on the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2)

Science.gov (United States)

Katz, Daniel S.; Choi, Sou-Cheng T.; Wilkins-Diehr, Nancy; Chue Hong, Neil; Venters, Colin C.; Howison, James; Seinstra, Frank; Jones, Matthew; Cranston, Karen; Clune, Thomas L.; de Val-Borro, Miguel; Littauer, Richard

2016-02-01

This technical report records and discusses the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2). The report includes a description of the alternative, experimental submission and review process, two workshop keynote presentations, a series of lightning talks, a discussion on sustainability, and five discussions from the topic areas of exploring sustainability; software development experiences; credit & incentives; reproducibility & reuse & sharing; and code testing & code review. For each topic, the report includes a list of tangible actions that were proposed and that would lead to potential change. The workshop recognized that reliance on scientific software is pervasive in all areas of world-leading research today. The workshop participants then proceeded to explore different perspectives on the concept of sustainability. Key enablers and barriers of sustainable scientific software were identified from their experiences. In addition, recommendations with new requirements such as software credit files and software prize frameworks were outlined for improving practices in sustainable software engineering. There was also broad consensus that formal training in software development or engineering was rare among the practitioners. Significant strides need to be made in building a sense of community via training in software and technical practices, on increasing their size and scope, and on better integrating them directly into graduate education programs. Finally, journals can define and publish policies to improve reproducibility, whereas reviewers can insist that authors provide sufficient information and access to data and software to allow them reproduce the results in the paper. Hence a list of criteria is compiled for journals to provide to reviewers so as to make it easier to review software submitted for publication as a "Software Paper."

Characterization of the radon source in North-Central Florida. Final report part 1 -- Final project report; Final report part 2 -- Technical report

International Nuclear Information System (INIS)

1997-01-01

This report contains two separate parts: Characterization of the Radon Source in North-Central Florida (final report part 1 -- final project report); and Characterization of the Radon Source in North-Central Florida (technical report). The objectives were to characterize the radon 222 source in a region having a demonstrated elevated indoor radon potential and having geology, lithology, and climate that are different from those in other regions of the U.S. where radon is being studied. Radon availability and transport in this region were described. Approaches for predicting the radon potential of lands in this region were developed

The World in Slow Motion: Using a High-Speed Camera in a Physics Workshop

Science.gov (United States)

Dewanto, Andreas; Lim, Geok Quee; Kuang, Jianhong; Zhang, Jinfeng; Yeo, Ye

2012-01-01

We present a physics workshop for college students to investigate various physical phenomena using high-speed cameras. The technical specifications required, the step-by-step instructions, as well as the practical limitations of the workshop, are discussed. This workshop is also intended to be a novel way to promote physics to Generation-Y…

Vadose Zone Modeling Workshop proceedings, March 29--30, 1993

International Nuclear Information System (INIS)

Khaleel, R.

1993-08-01

At the Hanford Site, the record of decision for remediation of CERCLA sites is largely based on results of the baseline risk and performance assessment of the remedial action alternatives. These assessments require the ability to predict the fate and transport of contaminants along appropriate exposure pathways which, in case of the Hanford Site, includes the migration of contaminants through the vadose zone to the water table. Listed below are some of the requirements, as prescribed by the regulators, relative to CERCLA risk and performance assessment at Hanford. A workshop was organized by the Environmental Risk and Performance Assessment Group, Westinghouse Hanford Company on March 29--30, 1993 at the Richland Best Western Tower Inn. During the workshop, an assessment was made of the need for and scope of various tasks being conducted or planned as part of the Hanford Site waste isolation performance assessment/risk assessment activities. Three external, nationally-recognized experts served as part of a review panel for the workshop: (a) Professor Lynn Gelhar of MIT; (b) Professor Peter Wierenga of University of Arizona; and (c) Dr. Rien van Genuchten of US Salinity Laboratory, Riverside, California. The technical experts provided their perspectives on the current state-of-the-art in vadose zone flow and transport modeling. In addition, the technical experts provided an outside independent assessment of the work being performed or planned in support of various activities identified in TPA Milestone M-29-02. This document includes the following: Recommendations from the three peer reviewers; areas of expertise of the three peer reviewers; workshop agenda; copies of viewgraphs (where available) from presenters at the workshop; workshop minutes; and list of workshop attendees

Clean Energy Works Oregon Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Jacob, Andria [City of Portland; Cyr, Shirley [Clean Energy Works

2013-12-31

In April 2010, the City of Portland received a $20 million award from the U.S. Department of Energy, as part of the Energy Efficiency and Conservation Block Grant program. This award was appropriated under the American Recovery and Reinvestment Act (ARRA), passed by President Obama in 2009. DOE’s program became known as the Better Buildings Neighborhood Program (BBNP). The BBNP grant objectives directed the City of Portland Bureau of Planning and Sustainability (BPS) as the primary grantee to expand the BPS-led pilot program, Clean Energy Works Portland, into Clean Energy Works Oregon (CEWO), with the mission to deliver thousands of home energy retrofits, create jobs, save energy and reduce carbon dioxide emissions.The Final Technical Report explores the successes and lessons learned from the first 3 years of program implementation.

The Halden Reactor Project workshop on HAMMLAB 2000

International Nuclear Information System (INIS)

Sebok, Angelia L.; Grini, Rolf-Einar; Larsen, Marit; Ness, Eyvind; Soerensen, Aimar

1998-01-01

A workshop on HAMMLAB 2000 was organised in Halden, May 26-27, 1997. The purpose of the workshop was to discuss and make recommendations on requirements for the design of HAMMLAB 2000 and to discuss the future research agenda. The workshop began with several presentations summarising the status of the current HAMMLAB 2000 project. Three invited speakers with expertise in human-machine laboratories and simulators delivered presentations of their experiences. Later, the workshop was divided into five working groups that discussed the following issues in parallel: (1) Technical Studies, Research Agenda; (2) Human Factors Research Agenda; (3) Data Collection; (4) Synergy with Other Industries; (5) Virtual Reality. Each group produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. This report summarises the presentation of the invited speakers, and the discussions and recommendations of the individual working groups. (author)

Energy Impact Illinois - Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Olson, Daniel [Senior Energy Efficiency Planner; Plagman, Emily [Senior Energy Planner; Silberhorn, Joey-Lin [Energy Efficiency Program Assistant

2014-02-18

Energy Impact Illinois (EI2) is an alliance of government organizations, nonprofits, and regional utility companies led by the Chicago Metropolitan Agency for Planning (CMAP) that is dedicated to helping communities in the Chicago metropolitan area become more energy efficient. Originally organized as the Chicago Region Retrofit Ramp-Up (CR3), EI2 became part of the nationwide Better Buildings Neighborhood Program (BBNP) in May 2010 after receiving a $25 million award from the U.S. Department of Energy (DOE) authorized through the American Recovery and Reinvestment Act of 2009 (ARRA). The program’s primary goal was to fund initiatives that mitigate barriers to energy efficiency retrofitting activities across residential, multifamily, and commercial building sectors in the seven-county CMAP region and to help to build a sustainable energy efficiency marketplace. The EI2 Final Technical Report provides a detailed review of the strategies, implementation methods, challenges, lessons learned, and final results of the EI2 program during the initial grant period from 2010-2013. During the program period, EI2 successfully increased direct retrofit activity in the region and was able to make a broader impact on the energy efficiency market in the Chicago region. As the period of performance for the initial grant comes to an end, EI2’s legacy raises the bar for the region in terms of helping homeowners and building owners to take action on the continually complex issue of energy efficiency.

Space Station Workshop: Commercial Missions and User Requirements

Science.gov (United States)

1988-01-01

The topics of discussion addressed during a three day workshop on commercial application in space are presented. Approximately half of the program was directed towards an overview and orientation to the Space Station Project; the technical attributes of space; and present and future potential commercial opportunities. The remaining time was spent addressing technological issues presented by previously-formed industry working groups, who attempted to identify the technology needs, problems or issues faced and/or anticipated by the following industries: extraction (mining, agriculture, petroleum, fishing, etc.); fabrication (manufacturing, automotive, aircraft, chemical, pharmaceutical and electronics); and services (communications, transportation and retail robotics). After the industry groups presented their technology issues, the workshop divided into smaller discussion groups composed of: space experts from NASA; academia; industry experts in the appropriate disciplines; and other workshop participants. The needs identified by the industry working groups, space station technical requirements, proposed commercial ventures and other issues related to space commercialization were discussed. The material summarized and reported are the consensus from the discussion groups.

Report of the first international workshop on human chromosome 8 mapping. Final report

Energy Technology Data Exchange (ETDEWEB)

Wood, S.; Ben Othmane, K.; Bergerheim, U.S.R. [and others

1993-12-31

The first international chromosome 8 workshop was held in Vancouver, Canada May 2--4, 1993. The conference was attended by 23 participants from Australia, Canada, Germany, the Netherlands, Sweden, the United Kingdom and the US. Twenty three abstracts are included from this workshop. The workshop was supported by CGAT/CTAG (Canadian Genome Analysis & Technology Program/Programme Canadien de Technologie & D`Analyse du Genome) as well as by travel funds allocated by the National Institutes of Health and the Department of Energy of the United States and by agencies within the countries of overseas participants. The goals of the workshop were to evaluate new locus assignments, review new data obtained for previously assigned loci, develop a consensus marker order for chromosome 8, assess and integrate physical mapping information, identify resources and foster collaboration.

Modeling and low-level waste management: an interagency workshop

Energy Technology Data Exchange (ETDEWEB)

Little, C.A.; Stratton, L.E. (comps.)

1980-01-01

The interagency workshop on Modeling and Low-Level Waste Management was held on December 1-4, 1980 in Denver, Colorado. Twenty papers were presented at this meeting which consisted of three sessions. First, each agency presented its point of view concerning modeling and the need for models in low-level radioactive waste applications. Second, a larger group of more technical papers was presented by persons actively involved in model development or applications. Last of all, four workshops were held to attempt to reach a consensus among participants regarding numerous waste modeling topics. Abstracts are provided for the papers presented at this workshop.

Modeling and low-level waste management: an interagency workshop

International Nuclear Information System (INIS)

Little, C.A.; Stratton, L.E.

1980-01-01

The interagency workshop on Modeling and Low-Level Waste Management was held on December 1-4, 1980 in Denver, Colorado. Twenty papers were presented at this meeting which consisted of three sessions. First, each agency presented its point of view concerning modeling and the need for models in low-level radioactive waste applications. Second, a larger group of more technical papers was presented by persons actively involved in model development or applications. Last of all, four workshops were held to attempt to reach a consensus among participants regarding numerous waste modeling topics. Abstracts are provided for the papers presented at this workshop

Final Technical Report for DE-FG02-98ER45737

Energy Technology Data Exchange (ETDEWEB)

Ade, Harald W.

2018-04-24

Final Technical Report For DOE Grant No. DE-FG02-98ER45737 Development of a Scanning Transmission X-Ray Microscope Polymer Thin Films and Self Assembled Monolayers: Pattern Formation and Surface Interactions NEXAFS Microscopy and Resonant Scattering of Polymeric Materials Organic Heterojunction Devices: Structure, Composition, and Performance at <20 nm Resolution Fundamental Science of High Open Circuit Voltage Excitonic Solar Cells Control of Interface- and Mesoscopic Structure in High Performance Organic Solar Cells: Towards a Predictive Device Paradigm

Summary report of the final technical meeting on 'International Reactor Dosimetry File: IRDF-2002'

International Nuclear Information System (INIS)

Griffin, Patrick J.; Paviotti-Corcuera, R.

2003-10-01

Presentations, recommendations and conclusions of the Final Technical Meeting on 'International Reactor Dosimetry File: IRDF-2002' are summarized in this report. The main aims of this meeting were to discuss scientific and technical matters related to reactor dosimetry and to assign responsibilities for the preparation of the final version of the IRDF- 2002 library and the associated TECDOC. Tasks were assigned and deadlines were agreed. Participants emphasized that accurate and complete nuclear data for reactor dosimetry are essential to improve the assessment accuracies for reactor pressure vessel service lifetimes in nuclear power plants, as well as for other neutron metrology applications such as boron neutron capture therapy, therapeutic use of medical isotopes, nuclear physics measurements, and reactor safety applications. (author)

Technical documentation challenges in aviation maintenance : a proceedings report.

Science.gov (United States)

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

Objectives and overview of the workshop

International Nuclear Information System (INIS)

Ajayi, R. I.

1999-01-01

This paper by the Technical Director of the FRPS gives a presentation on the broad objective and overviews of the workshop. The growing use of radioactivity in industrial and scientific applications and research and the importance of radiation protection are presented. Cognisance is given to harmful levels of exposure

Proceedings of the international workshop on monitoring forest degradation in Southeast Asia

Science.gov (United States)

Leif A. Mortenson; James J. Halperin; Patricia N. Manley; Rich L. Turner

2013-01-01

The international workshop on monitoring forest degradation in Southeast Asia provided a forum for discussion of the technical, social and political challenges and successes that have occurred during recent work in sub-national forest degradation monitoring. The 2012 workshop, held in Bangkok, Thailand, followed recent US Forest Service/LEAF (USAID's Lowering...

Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Eggeman, Tim [ZeaChem Inc., Lakewood, CO (United States); O' Neill, Brian [ZeaChem Inc., Lakewood, CO (United States)

2016-08-17

ZeaChem Inc. and US DOE successfully demonstrated the ZeaChem process for producing sugars and ethanol from high-impact biomass feedstocks. The project was executed over a 5-year period under a $31.25 million cooperative agreement (80:20 Federal:ZeaChem cost share). The project was managed by dividing it into three budget periods. Activities during Budget Period 1 were limited to planning, permitting, and other pre-construction planning. Budget Period 2 activities included engineering, procurement, construction, commissioning, start-up and initial operations through the Independent Engineer Test Runs. The scope of construction was limited to the Chem Frac and Hydrogenolysis units, as the Core Facility was already in place. Construction was complete in December 2012, and the first cellulosic ethanol was produced in February 2013. Additional operational test runs were conducted during Budget Period 3 (completed June 2015) using hybrid poplar, corn stover, and wheat straw feedstocks, resulting in the production of cellulosic ethanol and various other biorefinery intermediates. The research adds to the understanding of the Chem Frac and Hydrogenolysis technologies in that the technical performance of each unit was measured, and the resulting data and operational experience can be used as the basis for engineering designs, thus mitigating risks for deployment in future commercial facilities. The Chem Frac unit was initially designed to be operated as two-stage dilute acid hydrolysis, with first stage conditions selected to remove the hemicellulose fraction of the feedstock, and the second stage conditions selected to remove the cellulose fraction. While the Chem Frac unit met or exceeded the design capacity of 10 ton(dry)/day, the technical effectiveness of the Chem Frac unit was below expectations in its initial two-stage dilute acid configuration. The sugars yields were low, the sugars were dilute, and the sugars had poor fermentability caused by excessive inhibitors

Workshop for cascade project, physics using large acceptance spectrograph and its technical considerations

International Nuclear Information System (INIS)

1989-03-01

The Workshop for Cascade, subtitled 'Physics Using Large Acceptance Spectrograph and Its Technical Considerations', was held on July 13, 1988 by the Nuclear Physics Research Center, Osaka University. The present proceedings carry a total of 18 reports, which are entitled 'RCNP Large Acceptance Spectrograph (plan)', 'Correlation Experiments with a System Consisting of a Small Number of Nucleons', 'Measurement of (d,d) and (d, 2 He) Reactions with Large Solid Angle Spectrograph', 'The (p,2p) and (p,pn) Reactions', 'Correlation Experiments with Large Acceptance Spectrograph', 'Efforts at Determination of Various Correlations in Alpha Particles', 'Two-Nucleon Correlation in Nucleus', 'A Study on Particle Migration Reaction with Broad-Band Spectrograph', 'Measurement of Response in Highly Excited State during Nucleon Migration Reaction', 'A Study on Δ-Excitation within Nucleus', 'A Few Problems Related with Response in Highly Excited State', 'Spin-Isospin Modes in Continuum', '(p,π) and (p,xπ) Reactions', 'Formation of π - in (p,2p) Reaction', 'Formation of π-Mesonic Atom with Consistent Momentum', 'Measurement of Excitation Functions by Means of 'Inconsistent' Dispersion in Magnetic Spectrograph', 'Deeply Bound π - States by 'π - Transfer' (n,p) Reactions', and 'On High Resolution (n,p) Facilities'. (N.K.)

Report on the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2

Directory of Open Access Journals (Sweden)

Daniel S. Katz

2016-02-01

Full Text Available This technical report records and discusses the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2. The report includes a description of the alternative, experimental submission and review process, two workshop keynote presentations, a series of lightning talks, a discussion on sustainability, and five discussions from the topic areas of exploring sustainability; software development experiences; credit & incentives; reproducibility & reuse & sharing; and code testing & code review. For each topic, the report includes a list of tangible actions that were proposed and that would lead to potential change. The workshop recognized that reliance on scientific software is pervasive in all areas of world-leading research today. The workshop participants then proceeded to explore different perspectives on the concept of sustainability. Key enablers and barriers of sustainable scientific software were identified from their experiences. In addition, recommendations with new requirements such as software credit files and software prize frameworks were outlined for improving practices in sustainable software engineering. There was also broad consensus that formal training in software development or engineering was rare among the practitioners. Significant strides need to be made in building a sense of community via training in software and technical practices, on increasing their size and scope, and on better integrating them directly into graduate education programs. Finally, journals can define and publish policies to improve reproducibility, whereas reviewers can insist that authors provide sufficient information and access to data and software to allow them reproduce the results in the paper. Hence a list of criteria is compiled for journals to provide to reviewers so as to make it easier to review software submitted for publication as a “Software Paper.” 

DE-FG02-04ER63746 FinalTechnicalReport

Energy Technology Data Exchange (ETDEWEB)

Lidstrom, M.E.

2009-09-05

This is the final technical report for a project involving the study of stress response systems in the radiation-resistant bacterium, Deinococcus radiodurans. Three stresses of importance for a mixed waste treatment strain were studied, heat shock, solvent shock, and phosphate starvation. In each case, specific genes involved in the ability to survive the stress were identified using a systems biology approach, and analysis of mutants was used to understand mechanisms. This study has led to increased understanding of the ways in which a potential treatment strain could be manipulated to survive multiple stresses for treatment of mixed wastes.

Statistical Analysis of CFD Solutions From the Fifth AIAA Drag Prediction Workshop

Science.gov (United States)

Morrison, Joseph H.

2013-01-01

A graphical framework is used for statistical analysis of the results from an extensive N-version test of a collection of Reynolds-averaged Navier-Stokes computational fluid dynamics codes. The solutions were obtained by code developers and users from North America, Europe, Asia, and South America using a common grid sequence and multiple turbulence models for the June 2012 fifth Drag Prediction Workshop sponsored by the AIAA Applied Aerodynamics Technical Committee. The aerodynamic configuration for this workshop was the Common Research Model subsonic transport wing-body previously used for the 4th Drag Prediction Workshop. This work continues the statistical analysis begun in the earlier workshops and compares the results from the grid convergence study of the most recent workshop with previous workshops.

Summary of the CSRI Workshop on Combinatorial Algebraic Topology (CAT): Software, Applications, & Algorithms

Energy Technology Data Exchange (ETDEWEB)

Bennett, Janine Camille [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Visualization and Scientific Computing Dept.; Day, David Minot [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Applied Mathematics and Applications Dept.; Mitchell, Scott A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Computer Science and Informatics Dept.

2009-11-20

This report summarizes the Combinatorial Algebraic Topology: software, applications & algorithms workshop (CAT Workshop). The workshop was sponsored by the Computer Science Research Institute of Sandia National Laboratories. It was organized by CSRI staff members Scott Mitchell and Shawn Martin. It was held in Santa Fe, New Mexico, August 29-30. The CAT Workshop website has links to some of the talk slides and other information, http://www.cs.sandia.gov/CSRI/Workshops/2009/CAT/index.html. The purpose of the report is to summarize the discussions and recap the sessions. There is a special emphasis on technical areas that are ripe for further exploration, and the plans for follow-up amongst the workshop participants. The intended audiences are the workshop participants, other researchers in the area, and the workshop sponsors.

Proceedings -- US Russian workshop on fuel cell technologies

Energy Technology Data Exchange (ETDEWEB)

Baker, B.; Sylwester, A. [comps.

1996-04-01

On September 26--28, 1995, Sandia National Laboratories sponsored the first Joint US/Russian Workshop on Fuel Cell Technology at the Marriott Hotel in Albuquerque, New Mexico. This workshop brought together the US and Russian fuel cell communities as represented by users, producers, R and D establishments and government agencies. Customer needs and potential markets in both countries were discussed to establish a customer focus for the workshop. Parallel technical sessions defined research needs and opportunities for collaboration to advance fuel cell technology. A desired outcome of the workshop was the formation of a Russian/American Fuel Cell Consortium to advance fuel cell technology for application in emerging markets in both countries. This consortium is envisioned to involve industry and national labs in both countries. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

QBone University and Lab Interconnect Testbed (QUALIT). Final report

Energy Technology Data Exchange (ETDEWEB)

Teitelbaum, Benjamin

2001-10-19

The QUALIT grant funded two broad categories of work: (1) Project-wide QBone engineering, instrumentation, and integration; (2) Focused workshops and measurement work relating specifically to advanced university/DOE connectivity. Significant progress has been made in both areas and, to both, QUALIT funding has been a key enabling resource. This final report summarizes the accomplishments of the QUALIT project and explains changes to the technical focus of the project that, while significant, remained true to the overall project goal: to research, test, and deploy IP layer traffic differentiation to redress congestion-related end-to-end performance problems on key university-DOE lab paths.

Regional IV Technical Training Workshops in Transportation: Financing in the 1990's, Selected Presentations

Science.gov (United States)

1993-05-01

The workshop offered sixteen individual workshops and five group sessions dealing with a variety of topics related to generating funding, operating efficiencies and cost savings for rural and small urban providers. The subject areas covered in this r...

2011 Marine Hydrokinetic Device Modeling Workshop: Final Report; March 1, 2011

Energy Technology Data Exchange (ETDEWEB)

Li, Y.; Reed, M.; Smith, B.

2011-10-01

This report summarizes the NREL Marine and Hydrokinetic Device Modeling Workshop. The objectives for the modeling workshop were to: (1) Review the designs of existing MHK device prototypes and discuss design and optimization procedures; (2) Assess the utility and limitations of modeling techniques and methods presently used for modeling MHK devices; (3) Assess the utility and limitations of modeling methods used in other areas, such as naval architecture and ocean engineering (e.g., oil & gas industry); and (4) Identify the necessary steps to link modeling with other important components that analyze MHK devices (e.g., tank testing, PTO design, mechanical design).

Mathematics Intensive Summer Session (MISS). Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-11-01

This final technical report appears in two parts: the report for the 1995 summer MISS program and the report for the 1996 summer MISS program. Copies of the US Department of Energy Pre-Freshman Enrichment Program 1995 Entry Form and 1996 Entry Form completed by all participants were sent to the Oak Ridge Institute for Science and Education in the fall of 1995 and 1996 respectively. Those forms are on file should they be needed. Attached also is a copy of the Summary of ideas for panel discussions, problem-solving sessions, or small group discussions presented at the Department of Energy Oak Ridge Institute for Science and Education Pre-Freshman Enrichment Program Project Directors Meeting held in San Antonio, TX, November 12--14, 1995.

The New Zealand Goethermal Workshop, 1979, Part 2

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

The New Zealand Geothermal Workshop took place on 29th-31st October 1979 at the University of Auckland. Over 100 participants were present (a list is included in this volume) with 6 overseas visitors, bring the number of countries represented (including the Institute's Fellows) to 14. Forty papers were presented over the three days of the meeting, together with 23 poster papers presented by the students of the Institute. This second Proceedings volume has been prepared as a supplement to the volume of conference papers distributed at the meeting, and was produced subsequent to the Workshop. The fist section of this volume includes additional papers presented at the meeting but not then available in printed form. The second part is a summary of the year's activities of the Geothermal Institute also presented in part at the meeting. These activities included some significant research contributions and original field investigations. Each fellow at the Institute was required as part of the course, to conduct an investigation and prepare a report which was presented at the Geothermal Workshop in a poster session. Abstracts of these project reports are included in this volume and five of the projects are reproduced in greater detail. Also included are outlines of the two original class projects conducted by the students and staff of the Institute, one a pre-feasibility study of the Ngawha Geothermal Field and the other an investigation of the Miranda Springs system. Finally, the lecture curriculum of the year's diploma course is presented in outline, together with the final examination papers. The two volumes of this document therefore include, as much as is possible within the restricted space, an overview of the Geothermal Institute's contribution to the development of geothermal energy together with a technical tribute to the many people involved in this very successful first year.

Technical and economic assessment of solar hybrid repowering. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1978-09-01

Public Service Company of New Mexico (PNM) has performed a Technical and Economic Assessment of Solar Hybrid Repowering under funding by the Department of Energy (DOE), the Electric Power Research Institute (EPRI), Western Energy Supply and Transmission (WEST) Associates, and a number of southwestern utilities. Solar hybrid repowering involves placement of solar hardware adjacent to and connected to existing gas- and oil-fueled electric generation units to displace some of or all the fossil fuel normally used during daylight hours. The subject study assesses the technical economic viability of the solar hybrid repowering concept within the southwestern United States and the PNM system. This document is a final report on the study and its results. The study was divided into the six primary tasks to allow a systematic investigation of the concept: (1) market survey and cost/benefit analysis, (2) study unit selection, (3) conceptual design and cost estimates, (4) unit economic analysis, (5) program planning, future phases, and (6) program management. Reeves Station No. 2 at Albuquerque, New Mexico, was selected for repowering with a design goal of 50 percent (25 MWe). The solar system design is based on the 10 MW solar central receiver pilot plant preliminary design for Barstow, California. SAN--1608-4-2 contains the technical drawings. (WHK)

Proceedings of the LLNL Technical Women`s Symposium

Energy Technology Data Exchange (ETDEWEB)

von Holtz, E. [ed.

1993-12-31

This report documents events of the LLNL Technical Women`s Symposium. Topics include; future of computer systems, environmental technology, defense and space, Nova Inertial Confinement Fusion Target Physics, technical communication, tools and techniques for biology in the 1990s, automation and robotics, software applications, materials science, atomic vapor laser isotope separation, technical communication, technology transfer, and professional development workshops.

Accelerators and storage rings. TS Workshop 2005. Book of Abstracts

International Nuclear Information System (INIS)

Ciriani, P.; Magnin, B.; Oliveira, R. de; Chevalley, J.; Artoos, K.; Bertone, C.; Minginette, P.; Corso, J.P.; Grillot, S.; Weisz, S.; Prodon, S.; Sakkinen, J.; Foraz, K.; Funken, A.; Bangert, N.; Hakulinen, T.; Boncompagni, Y.; Delamare, C.; Folch, R.; Poehler, M.; Bertarelli, A.; Martel, C.; Butin, F.; Osborne, J.; Evrard, S.; Lacarrere, D.; Gayde, J.C.; Renaglia, T.; Batz, M.; Tsesmelis, E.; Wijnands, T.; Perrot, A.L.; Gastal, M.; Atieh, S.; Cherif, A.; Costa Pinto, P.; Calatroni, S.; Ninin, P.; Battistin, M.; Arnau Izquierdo, G.; Favre, G.; Mathot, S.; Mainaud, H.; Podevin, C.; Jones, M.; Stowisek, J.; Roy, S.; Sanchez-Corral, E.; Petit, S.; Martel, P.; Colloca, C.; Van Der Bij, E.; Vadon, M.; Kahle, K.; Principe, R.; Macina, D.; Schmidt, R.; Ridewood, J.; Lopez-Hernandez, L.A.

2005-01-01

This document gathers the abstracts of the papers presented at the workshop. This workshop was dedicated to the status of the technical support of the LHC (large hadron collider) in CERN. The different issues concern: -) the installation of the equipment in the LHC tunnel (super-conducting magnets, cold boxes, PS magnets...), -) underground logistics, -) the installation of experimental areas, -) the new CERN control center, and -) special technologies. (A.C.)

Accelerators and storage rings. TS Workshop 2005. Book of Abstracts

Energy Technology Data Exchange (ETDEWEB)

Ciriani, P.; Magnin, B.; Oliveira, R. de; Chevalley, J.; Artoos, K.; Bertone, C.; Minginette, P.; Corso, J.P.; Grillot, S.; Weisz, S.; Prodon, S.; Sakkinen, J.; Foraz, K.; Funken, A.; Bangert, N.; Hakulinen, T.; Boncompagni, Y.; Delamare, C.; Folch, R.; Poehler, M.; Bertarelli, A.; Martel, C.; Butin, F.; Osborne, J.; Evrard, S.; Lacarrere, D.; Gayde, J.C.; Renaglia, T.; Batz, M.; Tsesmelis, E.; Wijnands, T.; Perrot, A.L.; Gastal, M.; Atieh, S.; Cherif, A.; Costa Pinto, P.; Calatroni, S.; Ninin, P.; Battistin, M.; Arnau Izquierdo, G.; Favre, G.; Mathot, S.; Mainaud, H.; Podevin, C.; Jones, M.; Stowisek, J.; Roy, S.; Sanchez-Corral, E.; Petit, S.; Martel, P.; Colloca, C.; Van Der Bij, E.; Vadon, M.; Kahle, K.; Principe, R.; Macina, D.; Schmidt, R.; Ridewood, J.; Lopez-Hernandez, L.A

2005-07-01

This document gathers the abstracts of the papers presented at the workshop. This workshop was dedicated to the status of the technical support of the LHC (large hadron collider) in CERN. The different issues concern: -) the installation of the equipment in the LHC tunnel (super-conducting magnets, cold boxes, PS magnets...), -) underground logistics, -) the installation of experimental areas, -) the new CERN control center, and -) special technologies. (A.C.)

University of Maryland component of the Center for Multiscale Plasma Dynamics: Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Dorland, William [University of Maryland

2014-11-18

The Center for Multiscale Plasma Dynamics (CMPD) was a five-year Fusion Science Center. The University of Maryland (UMD) and UCLA were the host universities. This final technical report describes the physics results from the UMD CMPD.

The math excellence workshop

International Nuclear Information System (INIS)

Lasser, Susan J.S.; Snelsire, Robert W.

1992-01-01

This paper describes the first two years of the Clemson University College of Engineering's Math Excellence Workshop, a program administered by Westinghouse Electric Corporation, Savannah River Site, and funded by the Department of Energy. The objective of the program is to prepare minority students for technical/scientific study, with the goal of increasing minority retention in the College of Engineering, Twenty-three African American students, all of whom had been accepted into the College of Engineering Fall 1990 freshman class, took part in the first year of the program. The contract paid for room, board, tuition, fees, books, and supplies for the students to live on campus and take a precalculus math course. In addition, the students attended a special honors workshop designed to prepare them to study technical material effectively. Twenty of the 23 students earned As or Bs in the precalculus class. All participants indicated that they felt confident of their ability to succeed academically at Clemson. At the end of the session, twenty of the students were still planning to major in engineering. The program was repeated the following summer with 24 students from the 1991 freshman class. Twelve of the students earned A's or B's in the precalculus class. (author)

The math excellence workshop

Energy Technology Data Exchange (ETDEWEB)

Lasser, Susan J.S.; Snelsire, Robert W [College of Engineering, Clemson University, Clemson, SC (United States)

1992-07-01

This paper describes the first two years of the Clemson University College of Engineering's Math Excellence Workshop, a program administered by Westinghouse Electric Corporation, Savannah River Site, and funded by the Department of Energy. The objective of the program is to prepare minority students for technical/scientific study, with the goal of increasing minority retention in the College of Engineering, Twenty-three African American students, all of whom had been accepted into the College of Engineering Fall 1990 freshman class, took part in the first year of the program. The contract paid for room, board, tuition, fees, books, and supplies for the students to live on campus and take a precalculus math course. In addition, the students attended a special honors workshop designed to prepare them to study technical material effectively. Twenty of the 23 students earned As or Bs in the precalculus class. All participants indicated that they felt confident of their ability to succeed academically at Clemson. At the end of the session, twenty of the students were still planning to major in engineering. The program was repeated the following summer with 24 students from the 1991 freshman class. Twelve of the students earned A's or B's in the precalculus class. (author)

Stimulation of ICT/domotics in houses. The organization of 2 workshops. Final report; De bevordering van ICT/domotica in woningen. De organisatie van 2 workshops. Eindrapport

Energy Technology Data Exchange (ETDEWEB)

Romer, J.C. [ECN Duurzame Energie in de Gebouwde Omgeving DEGO, Petten (Netherlands)

2003-07-01

The title project concerns the organization of two workshops on two concrete projects: (1) a building project for 43 dwellings for elderly people in Anna Paulowna, Netherlands, and (2) the building of a home for the elderly people (called Parkzicht) in Hippolytushoef, Netherlands. Preparatory activities for and the organization of the two workshops are described. The first workshop was held October 4th, 2002. The second workshop was planned for December 13th, 2002, but was cancelled. [Dutch] Een overzicht wordt gegeven van de activiteiten die hebben plaatsgevonden rond 2 concreet te realiseren projecten in Noord-Holland. De activiteiten bestaan uit de voorbereidende activiteiten en de organisatie van twee workshops. Een van de projecten betreft de bouw van 43 woningen voor senioren in Anna Paulowna en het andere project betreft de bouw van het verzorgingstehuis Parkzicht in Hippolytushoef. De 'Anna Paulowna' workshop werd 4 oktober 2002 gehouden. De Hippolytushoef workshop was gepland op 13 december 2002 maar is niet doorgegaan.

AECB workshop on seismic hazard assessment in Southern Ontario. Recorded proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

A workshop on seismic hazard assessment in southern Ontario was conducted on June 19-21, 1995. The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: The importance of geological and geophysical observations for the determination of seismic sources; Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information. Methods and data which should be used for characterizing the seismicity parameters of seismic sources. Methods for assessment of vibratory ground motion hazard. This document presents transcripts from recordings made of the presentations and discussion from the workshop. It will be noted, in some sections of the document, that the record is incomplete. This is due in part to recording equipment malfunction and in part due to the poor quality of recording obtained for certain periods.

AECB workshop on seismic hazard assessment in Southern Ontario. Recorded proceedings

International Nuclear Information System (INIS)

1995-01-01

A workshop on seismic hazard assessment in southern Ontario was conducted on June 19-21, 1995. The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: The importance of geological and geophysical observations for the determination of seismic sources; Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information. Methods and data which should be used for characterizing the seismicity parameters of seismic sources. Methods for assessment of vibratory ground motion hazard. This document presents transcripts from recordings made of the presentations and discussion from the workshop. It will be noted, in some sections of the document, that the record is incomplete. This is due in part to recording equipment malfunction and in part due to the poor quality of recording obtained for certain periods

BCI meeting 2005--workshop on technology: hardware and software.

Science.gov (United States)

Cincotti, Febo; Bianchi, Luigi; Birch, Gary; Guger, Christoph; Mellinger, Jürgen; Scherer, Reinhold; Schmidt, Robert N; Yáñez Suárez, Oscar; Schalk, Gerwin

2006-06-01

This paper describes the outcome of discussions held during the Third International BCI Meeting at a workshop to review and evaluate the current state of BCI-related hardware and software. Technical requirements and current technologies, standardization procedures and future trends are covered. The main conclusion was recognition of the need to focus technical requirements on the users' needs and the need for consistent standards in BCI research.

Workshop on Developing Safe Software

International Nuclear Information System (INIS)

Lawrence, J.D.

1994-11-01

The Workshop on Developing Safe Software was held July 22--23, 1992, at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the US Nuclear Regulatory Commission. These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was learned from the workshop

Workshop on developing safe software

International Nuclear Information System (INIS)

Lawrence, J.D.

1992-01-01

The Workshop on Developing Safe Software was held July 22--23 at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the U. S. Nuclear Regulatory Commission (NRC). These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was teamed from the workshop

Workshop on Recent Trends in Complex Methods for Partial Differential Equations

CERN Document Server

Celebi, A; Tutschke, Wolfgang

1999-01-01

This volume is a collection of manscripts mainly originating from talks and lectures given at the Workshop on Recent Trends in Complex Methods for Par­ tial Differential Equations held from July 6 to 10, 1998 at the Middle East Technical University in Ankara, Turkey, sponsored by The Scientific and Tech­ nical Research Council of Turkey and the Middle East Technical University. This workshop is a continuation oftwo workshops from 1988 and 1993 at the In­ ternational Centre for Theoretical Physics in Trieste, Italy entitled Functional analytic Methods in Complex Analysis and Applications to Partial Differential Equations. Since classical complex analysis of one and several variables has a long tra­ dition it is of high level. But most of its basic problems are solved nowadays so that within the last few decades it has lost more and more attention. The area of complex and functional analytic methods in partial differential equations, however, is still a growing and flourishing field, in particular as these ...

Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Bohdan W. Oppenheim; Rudolf Marloth

2007-10-26

Executive Summary The document contains Final Technical Report on the Industrial Assessment Center Program at Loyola Marymount University in Los Angeles, covering the contract period of 9/1/2002 to 11/30/2006, under the contract DE-FC36-02GO 12073. The Report describes six required program tasks, as follows: TASK 1 is a summary of the assessments performed over the life of the award: 77 assessments were performed, 595 AR were recommended, covering a very broad range of manufacturing plants. TASK 2 is a description of the efforts to promote and increase the adoption of assessment recommendations and employ innovative methods to assist in accomplishing these goals. The LMU IAC has been very successful in accomplishing the program goals, including implemented savings of $5,141,895 in energy, $10,045,411 in productivity and $30,719 in waste, for a total of $15,218,025. This represents 44% of the recommended savings of $34,896,392. TASK 3 is a description of the efforts promoting the IAC Program and enhancing recruitment efforts for new clients and expanded geographic coverage. LMU IAC has been very successful recruiting new clients covering Southern California. Every year, the intended number of clients was recruited. TASK 4 describes the educational opportunities, training, and other related activities for IAC students. A total of 38 students graduated from the program, including 2-3 graduate students every semester, and the remainder undergraduate students, mostly from the Mechanical Engineering Department. The students received formal weekly training in energy (75%) and productivity (25). All students underwent extensive safety training. All students praised the IAC experience very highly. TASK 5 describes the coordination and integration of the Center activities with other Center and IAC Program activities, and DOE programs. LMU IAC worked closely with MIT, and SDSU IAC and SFSU IAC, and enthusiastically supported the SEN activities. TASK 6 describes other tasks

Summary from the epistemic uncertainty workshop: consensus amid diversity

International Nuclear Information System (INIS)

Ferson, Scott; Joslyn, Cliff A.; Helton, Jon C.; Oberkampf, William L.; Sentz, Kari

2004-01-01

The 'Epistemic Uncertainty Workshop' sponsored by Sandia National Laboratories was held in Albuquerque, New Mexico, on 6-7 August 2002. The workshop was organized around a set of Challenge Problems involving both epistemic and aleatory uncertainty that the workshop participants were invited to solve and discuss. This concluding article in a special issue of Reliability Engineering and System Safety based on the workshop discusses the intent of the Challenge Problems, summarizes some discussions from the workshop, and provides a technical comparison among the papers in this special issue. The Challenge Problems were computationally simple models that were intended as vehicles for the illustration and comparison of conceptual and numerical techniques for use in analyses that involve: (i) epistemic uncertainty, (ii) aggregation of multiple characterizations of epistemic uncertainty, (iii) combination of epistemic and aleatory uncertainty, and (iv) models with repeated parameters. There was considerable diversity of opinion at the workshop about both methods and fundamental issues, and yet substantial consensus about what the answers to the problems were, and even about how each of the four issues should be addressed. Among the technical approaches advanced were probability theory, Dempster-Shafer evidence theory, random sets, sets of probability measures, imprecise coherent probabilities, coherent lower previsions, probability boxes, possibility theory, fuzzy sets, joint distribution tableaux, polynomial chaos expansions, and info-gap models. Although some participants maintained that a purely probabilistic approach is fully capable of accounting for all forms of uncertainty, most agreed that the treatment of epistemic uncertainty introduces important considerations and that the issues underlying the Challenge Problems are legitimate and significant. Topics identified as meriting additional research include elicitation of uncertainty representations, aggregation of

Third workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P. (eds.)

1977-12-15

The Third Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 14, 1977, with 104 attendees from six nations. In keeping with the recommendations expressed by the participants at the Second Workshop, the format of the Workshop was retained, with three days of technical sessions devoted to reservoir physics, well and reservoir testing, field development, and mathematical modeling of geothermal reservoirs. The program presented 33 technical papers, summaries of which are included in these Proceedings. Although the format of the Workshop has remained constant, it is clear from a perusal of the Table of Contents that considerable advances have occurred in all phases of geothermal reservoir engineering over the past three years. Greater understanding of reservoir physics and mathematical representations of vapor-dominated and liquid-dominated reservoirs are evident; new techniques for their analysis are being developed, and significant field data from a number of newer reservoirs are analyzed. The objectives of these workshops have been to bring together researchers active in the various physical and mathematical disciplines comprising the field of geothermal reservoir engineering, to give the participants a forum for review of progress and exchange of new ideas in this rapidly developing field, and to summarize the effective state of the art of geothermal reservoir engineering in a form readily useful to the many government and private agencies involved in the development of geothermal energy. To these objectives, the Third Workshop and these Proceedings have been successfully directed. Several important events in this field have occurred since the Second Workshop in December 1976. The first among these was the incorporation of the Energy Research and Development Administration (ERDA) into the newly formed Department of Energy (DOE) which continues as the leading Federal agency in geothermal reservoir engineering research. The Third

Proceedings of the Near-Earth-Object Interception Workshop

Science.gov (United States)

Canavan, G. J. (Editor); Solem, J. C. (Editor); Rather, John D. G. (Editor)

1993-01-01

The National Aeronautics and Space Administration Headquarters sponsored the Near-Earth-Object Interception Workshop hosted by the Los Alamos National Laboratory on 14-16 Jan. 1992 at the J. Robert Oppenheimer Study Center in Los Alamos, New Mexico. The Workshop evaluated the issues involved in intercepting celestial objects that could hit the Earth. It covered the technologies for acquiring, tracking, and homing, as well as those for sending interceptors to inspect, rendezvous with, land on, irradiate, deflect, or destroy them. This report records the presentations and technical options reviewed.

ATLAS TRT 2002 Workshop

CERN Multimedia

Capeans, M.

Starting on 17th May, the ATLAS TRT 2002 Workshop was organised by Ken MacFarlane and his team at Hampton University, Virginia, USA. During a welcome break in the very dense workshop programme, the group enjoyed a half-day long boat trip along the waterways, offering a first-hand look at the history and heritage of this part of America. The attendance during the six-day workshop was about 50 people representing most of the collaborating institutes, although many Russian colleagues had stayed in their institutes to pursue the start-up of end-cap wheel production at PNPI and DUBNA. The meeting clearly showed that, during the year 2002, the TRT community is focusing on final design issues and module/wheel construction, while moving at the same time towards acceptance testing and integration, including the front-end electronics. The two main topics treated at the workshop were the preparation for beginning full production of the FE electronics, and the wire-joint problem that the US barrel colleagues have been fa...

Workshop on decommissioning

International Nuclear Information System (INIS)

Broden, K.

2005-12-01

A Nordic workshop on decommissioning of nuclear facilities was held at Risoe in Denmark September 13-15, 2005. The workshop was arranged by NKS in cooperation with the company Danish Decommissioning, DD, responsible for decommissioning of nuclear facilities at Risoe. Oral presentations were made within the following areas: International and national recommendations and requirements concerning decommissioning of nuclear facilities Authority experiences of decommissioning cases Decommissioning of nuclear facilities in Denmark Decommissioning of nuclear facilities in Sweden Plans for decommissioning of nuclear facilities in Norway Plans for decommissioning of nuclear facilities in Finland Decommissioning of nuclear facilities in German and the UK Decommissioning of nuclear facilities in the former Soviet Union Results from research and development A list with proposals for future work within NKS has been prepared based on results from group-work and discussions. The list contains strategic, economical and political issues, technical issues and issues regarding competence and communication. (au)

Engineered Barrier System - Mechanical Integrity of KBS-3 Spent Fuel Canisters. Report from a Workshop. Synthesis and extended abstracts

Energy Technology Data Exchange (ETDEWEB)

2007-09-15

SKI is preparing to review the license applications being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) for a final repository for the geological disposal of spent nuclear fuel in the year 2009. As part of its preparation, SKI is conducting a series of technical workshops on key aspects of the Engineered Barrier System (EBS). The workshop reported here mainly dealt with the mechanical integrity of KBS-3 spent fuel canisters. This included assessment and review of various loading conditions, structural integrity models and mechanical properties of the copper shell and the cast iron insert. Degradation mechanisms such as stress corrosion cracking and brittle creep fracture were also briefly addressed. Previous workshops have addressed the overall concept for long-term integrity of the EBS, the manufacturing, testing and QA of the EBS, the performance confirmation for the EBS, long-term stability of the buffer and the backfill, corrosion properties of copper canisters and the spent fuel dissolution and source term modelling. The goal of ongoing review work in connection of the workshop series is to achieve a comprehensive overview of all aspects of SKB's EBS and spent fuel work prior to the handling of the forthcoming license application. This report aims to summarise the issues discussed at the workshop and to extract the essential viewpoints that have been expressed. The report is not a comprehensive record of all the discussions at the workshop, and individual statements made by workshop participants should be regarded as personal opinions rather than SKI viewpoints. Results from the EBS workshops series will be used as one important basis in future review work. This reports includes in addition to the workshop synthesis, questions to SKB identified prior to the workshop, and extended abstracts for introductory presentations

Extreme Conditions Modeling Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Coe, Ryan Geoffrey [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Neary, Vincent Sinclair [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Lawon, Michael J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2014-07-01

Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, New Mexico on May 13–14, 2014. The objective of the workshop was to review the current state of knowledge on how to numerically and experimentally model WECs in extreme conditions (e.g. large ocean storms) and to suggest how national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry. More than 30 U.S. and European WEC experts from industry, academia, and national research institutes attended the workshop, which consisted of presentations from W EC developers, invited keynote presentations from subject matter experts, breakout sessions, and a final plenary session .

Proceedings of the TOUGH workshop

Energy Technology Data Exchange (ETDEWEB)

Pruess, K. [ed.

1990-09-01

A workshop on applications and enhancements of the TOUGH/MULKOM family of multiphase fluid and heat flow simulation programs was held at Lawrence Berkeley Laboratory on September 13--14, 1990. The workshop was attended by 62 scientists from seven countries with interests in geothermal reservoir engineering, nuclear waste isolation, unsaturated zone hydrology, environmental problems, and laboratory and field experimentation. The meeting featured 21 technical presentations, extended abstracts of which are reproduced in the present volume in unedited form. Simulator applications included processes on a broad range of space scales, from centimeters to kilometers, with transient times from seconds to geologic time scales. A number of code enhancements were reported that increased execution speeds for large 3-D problems by factors of order 20, reduced memory requirements, and improved user-friendliness. The workshop closed with an open discussion session that focussed on future needs and means for interaction in the TOUGH user community. Input from participants was gathered by means of a questionnaire that is reproduced in the appendix. 171 refs., 91 figs., 16 tabs.

Proceedings of the TOUGH workshop

International Nuclear Information System (INIS)

Pruess, K.

1990-09-01

A workshop on applications and enhancements of the TOUGH/MULKOM family of multiphase fluid and heat flow simulation programs was held at Lawrence Berkeley Laboratory on September 13--14, 1990. The workshop was attended by 62 scientists from seven countries with interests in geothermal reservoir engineering, nuclear waste isolation, unsaturated zone hydrology, environmental problems, and laboratory and field experimentation. The meeting featured 21 technical presentations, extended abstracts of which are reproduced in the present volume in unedited form. Simulator applications included processes on a broad range of space scales, from centimeters to kilometers, with transient times from seconds to geologic time scales. A number of code enhancements were reported that increased execution speeds for large 3-D problems by factors of order 20, reduced memory requirements, and improved user-friendliness. The workshop closed with an open discussion session that focussed on future needs and means for interaction in the TOUGH user community. Input from participants was gathered by means of a questionnaire that is reproduced in the appendix. 171 refs., 91 figs., 16 tabs

Nuclear containment steel liner corrosion workshop : final summary and recommendation report.

Energy Technology Data Exchange (ETDEWEB)

Erler, Bryan A. (Erler Engineering Ltd., Chicago, IL); Weyers, Richard E. (Virginia Tech University, Blacksburg, VA); Sagues, Alberto (University of South Florida, Tampa, FL); Petti, Jason P.; Berke, Neal Steven (Tourney Consulting Group, LLC, Kalamazoo, MI); Naus, Dan J. (Oak Ridge National Laboratory, Oak Ridge, TN)

2011-07-01

This report documents the proceedings of an expert panel workshop conducted to evaluate the mechanisms of corrosion for the steel liner in nuclear containment buildings. The U.S. Nuclear Regulatory Commission (NRC) sponsored this work which was conducted by Sandia National Laboratories. A workshop was conducted at the NRC Headquarters in Rockville, Maryland on September 2 and 3, 2010. Due to the safety function performed by the liner, the expert panel was assembled in order to address the full range of issues that may contribute to liner corrosion. This report is focused on corrosion that initiates from the outer surface of the liner, the surface that is in contact with the concrete containment building wall. Liner corrosion initiating on the outer diameter (OD) surface has been identified at several nuclear power plants, always associated with foreign material left embedded in the concrete. The potential contributing factors to liner corrosion were broken into five areas for discussion during the workshop. Those include nuclear power plant design and operation, corrosion of steel in contact with concrete, concrete aging and degradation, concrete/steel non-destructive examination (NDE), and concrete repair and corrosion mitigation. This report also includes the expert panel member's recommendations for future research.

Workshop on algorithms for macromolecular modeling. Final project report, June 1, 1994--May 31, 1995

Energy Technology Data Exchange (ETDEWEB)

Leimkuhler, B.; Hermans, J.; Skeel, R.D.

1995-07-01

A workshop was held on algorithms and parallel implementations for macromolecular dynamics, protein folding, and structural refinement. This document contains abstracts and brief reports from that workshop.

Workshop for development of formal MC and A plans

International Nuclear Information System (INIS)

Erkkila, B.H.; Hatcher, C.R.; Scott, S.C.; Thomas, K.E.

1998-01-01

Upgrades to both physical protection and material controls and accountability (MC and A) are progressing at many nuclear facilities in the Russian Federation. In general, Russian facilities are well prepared to address issues related to physical protection. The infrastructure to plan and implement physical protection upgrades is already in place in Russia. The infrastructure to integrate new and existing MC and A capabilities is not as well developed. The authors experience has shown that working with Russian facility management and technical personnel to draft an MC and A plan provides a way of moving MC and A upgrades forward. Los Alamos has developed a workshop for Russian nuclear facilities to facilitate the preparation of their facility MC and A plans. The workshops have been successful in bringing together facility management, safeguards specialists, and operations personnel to initiate the process of drafting these MC and A plans. The MC and A plans provide the technical basis for scheduling future MC and A upgrades at the facilities. Although facility MC and A plans are site specific, the workshop can be tailored to guide the development of an MC and A plan for any Russian nuclear site

International workshop on chromosome 3. Final report, April 15, 1991--April 14, 1992

Energy Technology Data Exchange (ETDEWEB)

Gemmill, R.M.

1992-07-01

The Second Workshop on Human Chromosome 3 was held on April 4--5, 1991 at Denver, Colorado. There were 43 participants representing 8 nations. The workshop participants reviewed the current state of the chromosome 3 map, both physical and genetic, and prepared lists of markers and cell lines to be made commonly available. These markers and cell lines should be incorporated into the mapping efforts of diverse groups to permit the integration of data and development of consensus maps at future workshops. Region specific efforts were described for sections of the chromosome harboring genes thought to be involved in certain diseases including Von Hippel-Lindau disease, 3p-syndrome, lung cancer and renal cancer. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Proceedings of the Oak Ridge Electron Linear Accelerator (ORELA) Workshop

International Nuclear Information System (INIS)

Dunn, M.E.

2006-01-01

The Oak Ridge National Laboratory (ORNL) organized a workshop at ORNL July 14-15, 2005, to highlight the unique measurement capabilities of the Oak Ridge Electron Linear Accelerator (ORELA) facility and to emphasize the important role of ORELA for performing differential cross-section measurements in the low-energy resonance region that is important for nuclear applications such as nuclear criticality safety, nuclear reactor and fuel cycle analysis, stockpile stewardship, weapons research, medical diagnosis, and nuclear astrophysics. The ORELA workshop (hereafter referred to as the Workshop) provided the opportunity to exchange ideas and information pertaining to nuclear cross-section measurements and their importance for nuclear applications from a variety of perspectives throughout the U.S. Department of Energy (DOE). Approximately 50 people, representing DOE, universities, and seven U.S. national laboratories, attended the Workshop. The objective of the Workshop was to emphasize the technical community endorsement for ORELA in meeting nuclear data challenges in the years to come. The Workshop further emphasized the need for a better understanding of the gaps in basic differential nuclear measurements and identified the efforts needed to return ORELA to a reliable functional measurement facility. To accomplish the Workshop objective, nuclear data experts from national laboratories and universities were invited to provide talks emphasizing the unique and vital role of the ORELA facility for addressing nuclear data needs. ORELA is operated on a full cost-recovery basis with no single sponsor providing complete base funding for the facility. Consequently, different programmatic sponsors benefit by receiving accurate cross-section data measurements at a reduced cost to their respective programs; however, leveraging support for a complex facility such as ORELA has a distinct disadvantage in that the programmatic funds are only used to support program

Proceedings of the Oak Ridge Electron Linear Accelerator (ORELA) Workshop

Energy Technology Data Exchange (ETDEWEB)

Dunn, M.E.

2006-02-27

The Oak Ridge National Laboratory (ORNL) organized a workshop at ORNL July 14-15, 2005, to highlight the unique measurement capabilities of the Oak Ridge Electron Linear Accelerator (ORELA) facility and to emphasize the important role of ORELA for performing differential cross-section measurements in the low-energy resonance region that is important for nuclear applications such as nuclear criticality safety, nuclear reactor and fuel cycle analysis, stockpile stewardship, weapons research, medical diagnosis, and nuclear astrophysics. The ORELA workshop (hereafter referred to as the Workshop) provided the opportunity to exchange ideas and information pertaining to nuclear cross-section measurements and their importance for nuclear applications from a variety of perspectives throughout the U.S. Department of Energy (DOE). Approximately 50 people, representing DOE, universities, and seven U.S. national laboratories, attended the Workshop. The objective of the Workshop was to emphasize the technical community endorsement for ORELA in meeting nuclear data challenges in the years to come. The Workshop further emphasized the need for a better understanding of the gaps in basic differential nuclear measurements and identified the efforts needed to return ORELA to a reliable functional measurement facility. To accomplish the Workshop objective, nuclear data experts from national laboratories and universities were invited to provide talks emphasizing the unique and vital role of the ORELA facility for addressing nuclear data needs. ORELA is operated on a full cost-recovery basis with no single sponsor providing complete base funding for the facility. Consequently, different programmatic sponsors benefit by receiving accurate cross-section data measurements at a reduced cost to their respective programs; however, leveraging support for a complex facility such as ORELA has a distinct disadvantage in that the programmatic funds are only used to support program

Nuclear Physics Science Network Requirements Workshop, May 2008 - Final Report

Energy Technology Data Exchange (ETDEWEB)

Tierney, Ed., Brian L; Dart, Ed., Eli; Carlson, Rich; Dattoria, Vince; Ernest, Michael; Hitchcock, Daniel; Johnston, William; Kowalski, Andy; Lauret, Jerome; Maguire, Charles; Olson, Douglas; Purschke, Martin; Rai, Gulshan; Watson, Chip; Vale, Carla

2008-11-10

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States of America. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In May 2008, ESnet and the Nuclear Physics (NP) Program Office of the DOE Office of Science organized a workshop to characterize the networking requirements of the science programs funded by the NP Program Office. Most of the key DOE sites for NP related work will require significant increases in network bandwidth in the 5 year time frame. This includes roughly 40 Gbps for BNL, and 20 Gbps for NERSC. Total transatlantic requirements are on the order of 40 Gbps, and transpacific requirements are on the order of 30 Gbps. Other key sites are Vanderbilt University and MIT, which will need on the order of 20 Gbps bandwidth to support data transfers for the CMS Heavy Ion program. In addition to bandwidth requirements, the workshop emphasized several points in regard to science process and collaboration. One key point is the heavy reliance on Grid tools and infrastructure (both PKI and tools such as GridFTP) by the NP community. The reliance on Grid software is expected to increase in the future. Therefore, continued development and support of Grid software is very important to the NP science community. Another key finding is that scientific productivity is greatly enhanced by easy researcher-local access to instrument data. This is driving the creation of distributed repositories for instrument data at collaborating institutions, along with a corresponding increase in demand for network-based data transfers and the tools

Asian-American Communications: In-School Staff Workshops, 1991-92. Final Evaluation Report. OREA Report.

Science.gov (United States)

Zhang, Zenin

The In-School Staff Workshops project run by Asian-American Communications was evaluated in its fourth year. The project provided various workshops for staff on Asian American and Asian cultures, intercultural communications, and strategies for helping Asian American students adjust to their new social and educational environments. The project…

Science Drivers and Technical Challenges for Advanced Magnetic Resonance

Energy Technology Data Exchange (ETDEWEB)

Mueller, Karl T.; Pruski, Marek; Washton, Nancy M.; Lipton, Andrew S.

2013-03-07

This report recaps the "Science Drivers and Technical Challenges for Advanced Magnetic Resonance" workshop, held in late 2011. This exploratory workshop's goal was to discuss and address challenges for the next generation of magnetic resonance experimentation. During the workshop, participants from throughout the world outlined the science drivers and instrumentation demands for high-field dynamic nuclear polarization (DNP) and associated magnetic resonance techniques, discussed barriers to their advancement, and deliberated the path forward for significant and impactful advances in the field.

Articulation Workshop in Drafting. Final Report.

Science.gov (United States)

Catonsville Community Coll., MD.

Drafting students from vocational/technical and high schools frequently repeat the same experiences and courses and work with the same instructional materials when they enroll in college engineering drawing, and architecture programs. In order to minimize needless repetition and address the problem of articulation between such schools and the…

Sixth international workshop on linear colliders. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Urakawa, Junji [ed.

1995-08-01

The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.).

Sixth international workshop on linear colliders. Proceedings

International Nuclear Information System (INIS)

Urakawa, Junji

1995-08-01

The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.)

Technical Workshop on Remediation of Radioactive Contamination in Agriculture, IAEA Headquarters, Vienna, Austria, 17-18 October 2016

International Nuclear Information System (INIS)

2017-01-01

The year 2016 marks the fifth anniversary of the accident at the Fukushima Daiichi nuclear power plant (NPP) and the 30th anniversary of the accident at the Chernobyl NPP. A Technical Workshop on Remediation of Radioactive Contamination in Agriculture was coorganised by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture and the National Agriculture and Food Research Organization of Japan (NARO) and held at the IAEA headquarters, Vienna, Austria from 17 to 18 October 2016. Over 100 experts from around the world participated in the event. All presentations and discussions focused on research results and practical experience from Japan and from countries affected by Chernobyl NPP accident. This event was a great success in promoting and sharing knowledge and experience related to remediation of radioactive contamination in food and agriculture. From an agricultural perspective, the impacts of these two major accidents are related to caesium radionuclides, specifically "1"3"7Cs, which is a relatively long lived isotope with a half-life of some thirty years. Research and technical efforts to remediate and ameliorate the impact of radioactivity on agricultural production aim to minimize and prevent contamination of foods and other commodities, and further to assist the social and economic recovery of affected rural communities by enabling sustainable production. However, these efforts are not widely appreciated outside the affected areas

Twenty-first workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

1996-01-26

PREFACE The Twenty-First Workshop on Geothermal Reservoir Engineering was held at the Holiday Inn, Palo Alto on January 22-24, 1996. There were one-hundred fifty-five registered participants. Participants came from twenty foreign countries: Argentina, Austria, Canada, Costa Rica, El Salvador, France, Iceland, Indonesia, Italy, Japan, Mexico, The Netherlands, New Zealand, Nicaragua, the Philippines, Romania, Russia, Switzerland, Turkey and the UK. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Sixty-six papers were presented in the technical sessions of the workshop. Technical papers were organized into twenty sessions concerning: reservoir assessment, modeling, geology/geochemistry, fracture modeling hot dry rock, geoscience, low enthalpy, injection, well testing, drilling, adsorption and stimulation. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bobbie Bishop-Gollan, Tom Box, Jim Combs, John Counsil, Sabodh Garg, Malcolm Grant, Marcel0 Lippmann, Jim Lovekin, John Pritchett, Marshall Reed, Joel Renner, Subir Sanyal, Mike Shook, Alfred Truesdell and Ken Williamson. Jim Lovekin gave the post-dinner speech at the banquet and highlighted the exciting developments in the geothermal field which are taking place worldwide. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager.

Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems (ERASMUS): Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

de Boer, Gijs [Univ. of Colorado, Boulder, CO (United States); Lawrence, Dale [Univ. of Colorado, Boulder, CO (United States); Palo, Scott [Univ. of Colorado, Boulder, CO (United States); Argrow, Brian [Univ. of Colorado, Boulder, CO (United States); LoDolce, Gabriel [Univ. of Colorado, Boulder, CO (United States); Curry, Nathan [Univ. of Colorado, Boulder, CO (United States); Weibel, Douglas [Univ. of Colorado, Boulder, CO (United States); Finamore, William [Univ. of Colorado, Boulder, CO (United States); D' Amore, Phillip [Univ. of Colorado, Boulder, CO (United States); Borenstein, Steven [Univ. of Colorado, Boulder, CO (United States); Nichols, Tevis [Univ. of Colorado, Boulder, CO (United States); Elston, Jack [Blackswift Technologies, Boulder, CO (United States); Ivey, Mark [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bendure, Albert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schmid, Beat [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Long, Charles [Univ. of Colorado, Boulder, CO (United States); Telg, Hagen [Univ. of Colorado, Boulder, CO (United States); Gao, Ru-Shan [National Oceanic and Atmospheric Administration (NOAA), Boulder, CO (United States); Hock, Terry [National Center for Atmospheric Research, Boulder, CO (United States); Bland, Geoff [NASA Ames Research Center (ARC), Moffett Field, Mountain View, CA (United States)

2017-03-29

This final technical report details activities undertaken as part of the referenced project. Included is information on the preparation of aircraft for deployment to Alaska, summaries of the three deployments covered under this project, and a brief description of the dataset and science directions pursued. Additionally, we provide information on lessons learned, publications, and presentations resulting from this work.

Results from two workshops: Developing and amending regulations and funding state radiation control programs

International Nuclear Information System (INIS)

Parker, G.

1993-09-01

The first section of this document presents the results of a technical workshop on the process of regulations development and amendment sponsored by the Nuclear Regulatory Commission (NRC). This workshop focused on methods for reducing the time it takes to promulgate regulations to help those States that are having difficulty meeting the three-year deadline for adopting new NRC regulations. Workshop participants responded to six questions, reviewed the procedures used by various States for revising and adopting changes to their regulations, and reviewed the time-flow charts used by various States. This workshop was designed to provide guidance to States that are promulgating and revising regulations. The second section of this document summarizes the proceedings of a technical workshop, also sponsored by the NRC, on funding radiation control programs that emphasized fee schedules and effective strategies for the 1990s. This workshop focused on determining the true costs of running a program, on setting realistic fees for the various categories of licenses, and on the most efficient methods for sending invoices, recording receipts, depositing money received, and issuing licenses. Workshop participants responded to seven questions; reviewed the methods various States use to determine true costs; reviewed the procedure that the various States use to produce invoices and licenses; reviewed the procedures that the States are required to abide by when they receive money; and reviewed the method used by the NRC to determine the cost of its various programs

Final Technical Report for contract number DE-FG02-05ER15670

Energy Technology Data Exchange (ETDEWEB)

Glazebrook, Jane [Univ. of Minnesota, Minneapolis, MN (United States)

2016-02-29

This is the final technical report for contract number DE-FG02-05ER15670. The project is now complete, and results of the project have been published. Two papers were published based on work done in the last three-year funding period. The DOIs of these papers are included below. The abstracts of the papers, providing summaries of the work, are included in the body of the report.

Technology Requirements For In Situ Decommissioning Workshop Report

International Nuclear Information System (INIS)

Jannik, T.; Lee, P.; Gladden, J.; Langton, C.; Serrato, M.; Urland, C.; Reynolds, E.

2009-01-01

In recognition of the increasing attention being focused on In Situ Decommissioning (ISD or entombment) as an acceptable and beneficial decommissioning end state, the Department of Energy's (DOE) Office of Environmental Management (EM) is developing guidance for the implementation of ISD of excess facilities within the DOE complex. Consistent with the overarching DOE goals for increased personnel and environmental safety, reduced technical uncertainties and risks, and overall gains in efficiencies and effectiveness, EM's Office of Deactivation and Decommissioning and Facility Engineering (EM-23) initiated efforts to identify the technical barriers and technology development needs for the optimal implementation of ISD. Savannah River National Laboratory (SRNL), as the EM Corporate Laboratory, conducted an ISD Technology Needs Workshop to identify the technology needs at DOE sites. The overall goal of the workshop was to gain a full understanding of the specific ISD technical challenges, the technologies available, and those needing development. The ISD Workshop was held December 9-10, 2008 in Aiken, SC. Experienced decommissioning operations personnel from Richland Operations Office (RL), Idaho National Laboratory (INL) and Savannah River Site (SRS) along with scientists and engineers specific expertise were assembled to identify incremental and 'game changing' solutions to ISD technology challenges. The workshop and follow-up activities yielded 14 technology needs statements and the recommendation that EM-23 prioritize and pursue the following specific technology development and deployment actions. For each action, the recommended technology acquisition mechanisms (competitive solicitation (CS) or direct funding (TCR)) are provided. Activities that are time critical for ISD projects, or require unique capabilities that reside in the DOE Laboratory system will be funded directly to those institutions. Activities that have longer lead times and where the private

Proceedings of the international workshop on conduct of inspections and inspector qualification and training

International Nuclear Information System (INIS)

Grimes, B.K.

1993-02-01

In the Fall of 1991, the OECD Committee on Nuclear Regulatory Activities (CNRA) approved the proposal of the Working Group (WGIP) on Inspection Practices to hold a workshop on the conduct of inspections, inspector qualification and training, and shutdown inspections at the Technical Training Center of the USNRC in Chattanooga, Tennessee. The workshop was held from August 29 to September 4, 1992. The workshop was preceded by an orientation briefing for facilitators and a get-acquainted reception for participants. The workshop began with a plenary introductory session and ended with a plenary conclusion and evaluation session. Individual discussion sessions have been cataloged separately

Report from the SciDB Workshop

Directory of Open Access Journals (Sweden)

J Becla

2008-11-01

Full Text Available A mini-workshop with representatives from the data-driven science and database research communities was organized in response to suggestions at the first XLDB Workshop. The goal was to develop common requirements and primitives for a next-generation database management system that scientists would use, including those from high-energy physics, astronomy, biology, geoscience and fusion, in order to stimulate research and advance technology. These requirements were thought by the database researchers to be novel and unlikely to be fully met by current commercial vendors. The two groups accordingly decided to explore building a new open source DBMS. This paper is the final report of the discussions and activities at the workshop

ENTRIA workshop: Emotions in the implementation of a final nuclear disposal site

International Nuclear Information System (INIS)

Kattau, Alke

2016-01-01

On 21 June 2016, prior to the publication of the report of the Commission Storage of High Radioactive Waste, ''Emotions in the realisation of a repository for nuclear waste'' were the topic of a workshop. The workshop was organised in the context of the Federal Ministry of Education and Research (BMBF) interdisciplinary research platform ENTRIA. In his opening remarks, Prof.Dr. Ulrich Smeddinck (Institute of Law of the University of Braunschweig) noticed, that emotions have been neglected in the scientific analysis so far, but fears and feelings to be considered with a special view.

H2@Scale Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Pivovar, Bryan

2017-03-31

Final report from the H2@Scale Workshop held November 16-17, 2016, at the National Renewable Energy Laboratory in Golden, Colorado. The U.S. Department of Energy's National Renewable Energy Laboratory hosted a technology workshop to identify the current barriers and research needs of the H2@Scale concept. H2@Scale is a concept regarding the potential for wide-scale impact of hydrogen produced from diverse domestic resources to enhance U.S. energy security and enable growth of innovative technologies and domestic industries. Feedback received from a diverse set of stakeholders at the workshop will guide the development of an H2@Scale roadmap for research, development, and early stage demonstration activities that can enable hydrogen as an energy carrier at a national scale.

The ROS Workshop

CERN Multimedia

Francis, D.

The first week of February saw the taking place of the ReadOut Subsystem (ROS) workshop. The ROS is the subsystem of the Trigger, DAQ & DCS project which receives and buffers data from the detector ReadOut Drivers (RODs). On request it then provides a subset of this buffered data, the so-called Regions of Interest (RoI), to the Level 2 trigger. Using the subsequent Level 2 trigger decision, the ROS either removes the buffered event data from its buffers or sends the full event data to the Event Filter for further processing. The workshop took place over a four-day period at a location in the Jura. The average daily attendance was twenty people, which mainly represented the five main ATLAS institutes currently engaged in this Trigger, DAQ & DCS activity. The aim of the workshop was to bring to an end the current prototyping activities in this area and launch the next, final, phase of prototyping. This new phase of prototyping will build on the successful activities of the previous phase and will focus...

Transformation of technical infrastructure

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev

, the evolution of large technological systems and theories about organisational and technological transformationprocesses. The empirical work consist of three analysis at three different levels: socio-technical descriptions of each sector, an envestigation of one municipality and envestigations of one workshop......The scope of the project is to investigate the possibillities of - and the barriers for a transformation of technical infrastructure conserning energy, water and waste. It focus on urban ecology as a transformation strategy. The theoretical background of the project is theories about infrastructure...

U.S. Department of Energy Workshop Report: Solar Resources and Forecasting

Energy Technology Data Exchange (ETDEWEB)

Stoffel, T.

2012-06-01

This report summarizes the technical presentations, outlines the core research recommendations, and augments the information of the Solar Resources and Forecasting Workshop held June 20-22, 2011, in Golden, Colorado. The workshop brought together notable specialists in atmospheric science, solar resource assessment, solar energy conversion, and various stakeholders from industry and academia to review recent developments and provide input for planning future research in solar resource characterization, including measurement, modeling, and forecasting.

Report on the international workshop on next generation linear colliders

International Nuclear Information System (INIS)

Ruth, R.D.

1989-05-01

Many laboratories around the world have begun vigorous research programs on a next generation linear collider (NLC). However, it has been recognized that the research towards NLC is beyond the capabilities of any one laboratory presently. This workshop was organized to begin a series of workshops that address this problem. Specifically, the main goals of the workshop were to discuss research programs of the various laboratories around the world, to identify common areas of interest in the various NLC designs, and finally to advance these programs by collaboration. The particular topics discussed briefly in this paper are: parameters, rf power, structures, final focus, beam dynamics, damping rings, and instrumentation. 2 refs., 3 figs., 6 tabs

Military Librarians Workshop: A Premier Gathering of Military Librarians, 1957-1999

National Research Council Canada - National Science Library

Palmer, William A., Jr; Hanna, Marcia

2000-01-01

The Military Librarian Workshop(MLW) is an annual meeting that brings together civilian and military personnel who serve as special librarians, library supervisors, or technical information officers in military or governmental...

TANGR2015 Heidelberg. Second international workshop on tracer applications of noble gas radionuclides in the geosciences

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-07-01

TANGR2015 is a workshop on the progress in the technique and application of Atom Trap Trace Analyis (ATTA). It is a follow-up to the first TANGR workshop, TANGR2012, which was held at the Argonne National Laboratory, Argonne, USA, in June 2012. It is organized in response to recent technical advances and new applications of Atom Trap Trace Analysis (ATTA), an analytical method for measuring the isotopes {sup 81}Kr, {sup 85}Kr, and {sup 39}Ar. The primary aim of the workshop is to discuss the technical progress of ATTA and thereby enable innovative and timely applications of the noble gas radionuclides to important scientific problems in earth and environmental sciences, e.g. in the fields of groundwater hydrology, glaciology, oceanography, and paleoclimatology.

Technical Report Series on Global Modeling and Data Assimilation, Volume 41 : GDIS Workshop Report

Science.gov (United States)

Koster, Randal D. (Editor); Schubert, Siegfried; Pozzi, Will; Mo, Kingtse; Wood, Eric F.; Stahl, Kerstin; Hayes, Mike; Vogt, Juergen; Seneviratne, Sonia; Stewart, Ron;

Final report: 'Rhodopseudomonas palustris' genome workshop to be held in Spring of 2001; FINAL

International Nuclear Information System (INIS)

Harwood, Caroline S.

2002-01-01

The 'Rhodopseudomonas palustris' genome workshop took place in Iowa City on April 6-8, 2001. The purpose of the meeting was to instruct members of the annotation working group in approaches to accomplishing the 'human' phase of the 'R. palustris' genome annotation. A partial draft of a paper describing the 'Rhodopseudomonas palustris' genome has been written and a full version of the paper should be ready for submission by the end of the summer 2002

Technical and logistic provisions for the delivery of radioactive wastes in the final repository Konrad

International Nuclear Information System (INIS)

Poeppinghaus, Jens

2013-01-01

The beginning of radioactive waste delivery to the final repository Konrad is planned for 2019. The main issue for the technical and logistic provisions is the development of a concept for the transport of the licensed radioactive waste containers to the site, including a turning concept for cylindrical waste forms and planning, construction and manufacture of transport equipment. Further issues include a logistic concept considering specific boundary conditions as administrative processes, priorities, special features of the delivering institutions and technical requirements of the repository.

Texas Hydrogen Education Final Scientific/Technical Report

Energy Technology Data Exchange (ETDEWEB)

Hitchcock, David; Bullock, Dan

2011-06-30

The Texas Hydrogen Education project builds on past interest in hydrogen and fuel cells to help create better informed leaders and stakeholders and thereby improve decision making and planning for inclusion of hydrogen and fuel cell technologies as energy alternatives in Texas. In past years in Texas, there was considerable interest and activities about hydrogen and fuel cells (2000-­2004). During that time, the Houston Advanced Research Center (HARC) created a fuel cell consortium and a fuel cell testing lab. Prior to 2008, interest and activities had declined substantially. In 2008, in cooperation with the Texas H2 Coalition and the State Energy Conservation Office, HARC conducted a planning process to create the Texas Hydrogen Roadmap. It was apparent from analysis conducted during the course of this process that while Texas has hydrogen and fuel cell advantages, there was little program and project activity as compared with other key states. Outreach and education through the provision of informational materials and organizing meetings was seen as an effective way of reaching decision makers in Texas. Previous hydrogen projects in Texas had identified the five major urban regions for program and project development. This geographic targeting approach was adopted for this project. The project successfully conducted the five proposed workshops in four of the target metropolitan areas: San Antonio, Houston, Austin, and the Dallas-­Ft. Worth area. In addition, eight outreach events were included to further inform state and local government leaders on the basics of hydrogen and fuel cell technologies. The project achieved its primary objectives of developing communication with target audiences and assembling credible and consistent outreach and education materials. The major lessons learned include: (1) DOE’s Clean Cities programs are a key conduit to target transportation audiences, (2) real-­world fuel cell applications (fuel cell buses, fuel cell fork lifts

Significant Problems in Geothermal Development in California, Final Report on Four Workshops, December 1978 - March 1979

Energy Technology Data Exchange (ETDEWEB)

None

1979-07-15

From November 1978 through March 1979 the California Geothermal Resources Board held four workshops on the following aspects of geothermal development in California: County Planning for Geothermal Development; Federal Leasing and Environmental Review Procedures; Transmission Corridor Planning; and Direct Heat Utilization. One of the objectives of the workshops was to increase the number of people aware of geothermal resources and their uses. This report is divided into two parts. Part 1 provides summaries of all the key information discussed in the workshops. For those people who were not able to attend, this part of the report provides you with a capsule version of the workshop sessions. Part 2 focuses on the key issues raised at the workshops which need to be acted upon to expedite geothermal resource development that is acceptable to local government and environmentally prudent. For the purpose of continuity, similar Geothermal Resources Task Force recommendations are identified.

Statistical Analysis of CFD Solutions from the Fourth AIAA Drag Prediction Workshop

Science.gov (United States)

Morrison, Joseph H.

2010-01-01

A graphical framework is used for statistical analysis of the results from an extensive N-version test of a collection of Reynolds-averaged Navier-Stokes computational fluid dynamics codes. The solutions were obtained by code developers and users from the U.S., Europe, Asia, and Russia using a variety of grid systems and turbulence models for the June 2009 4th Drag Prediction Workshop sponsored by the AIAA Applied Aerodynamics Technical Committee. The aerodynamic configuration for this workshop was a new subsonic transport model, the Common Research Model, designed using a modern approach for the wing and included a horizontal tail. The fourth workshop focused on the prediction of both absolute and incremental drag levels for wing-body and wing-body-horizontal tail configurations. This work continues the statistical analysis begun in the earlier workshops and compares the results from the grid convergence study of the most recent workshop with earlier workshops using the statistical framework.

Measuring What Matters Workshop Report

Science.gov (United States)

2015-01-14

Measuring What Matters Workshop Report Katie Stewart Julia Allen Michelle Valdez Lisa Young January 2015 TECHNICAL NOTE CMU/SEI-2015-TN...the approach using a simple objective: teaching a child to properly brush his/her teeth. Next, we demonstrate the approach using a cybersecurity...Ensure you child’s teeth are healthy. G1: Ensure your child has everything needed to brush his/her teeth. G2: Ensure your child is brushing his

Incorporating sustainability into TxDOT's transportation decision-making : interactive workshop

Science.gov (United States)

2010-01-01

The workshop is intended for new and experienced technical staff in TxDOT headquarters, district, and area offices to better understand how sustainability performance measures can be used at the sketch-planning level of project consideration. The wor...

Second Annual Workshop on Space Operations Automation and Robotics (SOAR 1988)

Science.gov (United States)

Griffin, Sandy (Editor)

1988-01-01

Papers presented at the Second Annual Workshop on Space Operation Automation and Robotics (SOAR '88), hosted by Wright State University at Dayton, Ohio, on July 20, 21, 22, and 23, 1988, are documented herein. During the 4 days, approximately 100 technical papers were presented by experts from NASA, the USAF, universities, and technical companies. Panel discussions on Human Factors, Artificial Intelligence, Robotics, and Space Systems were held but are not documented herein. Technical topics addressed included knowledge-based systems, human factors, and robotics.

The Fifth Workshop on HPC Best Practices: File Systems and Archives

Energy Technology Data Exchange (ETDEWEB)

Hick, Jason; Hules, John; Uselton, Andrew

2011-11-30

The workshop on High Performance Computing (HPC) Best Practices on File Systems and Archives was the fifth in a series sponsored jointly by the Department Of Energy (DOE) Office of Science and DOE National Nuclear Security Administration. The workshop gathered technical and management experts for operations of HPC file systems and archives from around the world. Attendees identified and discussed best practices in use at their facilities, and documented findings for the DOE and HPC community in this report.

Proceedings of the 10th Korea-Japan joint workshop on PSA. For Asian PSA network

International Nuclear Information System (INIS)

Yang, Joon-Eon; Homma, Toshimitsu

2009-12-01

The tenth Korea-Japan Joint Workshop on Probabilistic Safety Assessment (PSA) was held in the Jeju island of Korea, on May 18-20, 2009 organized by Korea Atomic Energy Research Institute (KAERI). The purpose of the workshop was to provide a forum for presentation and discussions on experiences and technical achievements related to PSA, risk-informed and performance-based approach, and other relevant issues in both countries. Since the first Korea-Japan Joint Workshop on PSA started in 1992, the workshops have provided an important and timely opportunity for exchange and discussion of the relevant information to all PSA practitioners and users of risk information in the industry, research, academia and regulatory arena. This was the tenth anniversary of the Joint Workshop with the main theme of 'For Asian PSA Network' and participants included those from China, Taiwan and the United States of America besides Korea and Japan. Two keynote speeches were presented by the former chairmen of this workshop, Prof. Chang-Sun Kang of Seoul National University and Prof. emeritus Shunsuke Kondo of Tokyo University. We had two special lectures, 70 papers presented by experts at 10 technical sessions related PSA, the special session on the status of PSA in Korea, Japan, China and Taiwan and panel discussion on their cooperation in PSA. This report provides the summary of each session, and all the presentation materials presented in the 10th Korea-Japan Joint Workshop on PSA. (author)

17th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Sopori, B. L.

2007-08-01

The National Center for Photovoltaics sponsored the 17th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 5-8, 2007. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The theme of this year's meeting was 'Expanding Technology for a Future Powered by Si Photovoltaics.'

IAEA/ICTP/WNU workshop on managing nuclear knowledge. Presentations

International Nuclear Information System (INIS)

2005-01-01

The purpose of the workshop was to continue efforts to raise awareness of the nuclear knowledge management challenge, to share best practices, and provide a forum for the exchange of information among participating nuclear professionals. The need to manage (preserve and transfer) knowledge has been widely recognized in the international community. The need is compounded by aging work force issues in many industries and is not limited to areas of nuclear technology. The workshop was attended by 41 participants from 24 counties and three international organizations. Presentations by several of the participants covered a broad range of nuclear knowledge management issues, including the role of technology, preserving expert knowledge, and preparing the new generation of nuclear worker. The meeting covered methodological and design practices for NKM including the information technology impact on NKM implementation, presented the lessons learned and accumulated national experiences and good practices from NKM programs in academia, industry, the governmental sector and technical support organizations. The style of the meeting was series of leading presentations followed by working sessions discussing the issues raised and difficulties envisaged. All participants were actively involved in discussions, panel reviews and workshop activities. During the technical sessions participants presented case studies and examples from their national activities/projects. The following issues have been addressed during the Workshop as the issues forming the framework for activities in nuclear knowledge management: Policies and Strategies in Nuclear Science and Technology; Managing Nuclear Information Resources; Human Resources and Knowledge Transfer for the Nuclear Sector; Managing and Preserving Knowledge in Nuclear Sector; Networking for Education, Training and Knowledge Transfer. The issues outlined in the workshop program including strategies, approaches and current activities on the

Development of goods movement strategic transportation directions : Workshop on opportunities and strategies : final workshop report

Energy Technology Data Exchange (ETDEWEB)

Advokaat, E. [Lura Consulting, Toronto, ON (Canada)

2003-04-01

This paper presents a newly developed strategy for the movement of goods that will support economic development and competitiveness in Central Ontario. The strategy was developed at a workshop which examined current and emerging conditions that influence the movement of goods in Central Ontario along with the challenges and opportunities for goods movement. Possible short-term actions and long-term directions that can be incorporated into a strategy were also discussed. Attendees included representatives from all levels of government as well as shippers, trucking firms, rail, air and marine carriers, and port authorities. The study area included the Greater Toronto Area, Hamilton, the Regional Municipality of Niagara, the Regional Municipality of Waterloo and surrounding counties. It was recommended that any movement of goods strategy should consider population increases, land use planning, cross-border issues, the Kyoto Protocol, traffic issues, rail transport, e-commerce and market competition. The workshop also provided a forum to discuss coordination efforts, intergovernmental complexity, lack of funding, data gaps, marine transport, travel demand management, the problem with 'business-as-usual' scenarios, and inconsistent support from the province of Ontario. Participants expressed the need for an institution such as the Freight Council which is dedicated to issues regarding the movement of goods. The notion of expanding and maintaining a rail network was also supported by many participants.

Imaging Sciences Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Candy, J.V.

1996-11-21

This report contains the proceedings of the Imaging Sciences Workshop sponsored by C.A.S.LS., the Center for Advanced Signal & Image Sciences. The Center, established primarily to provide a forum where researchers can freely exchange ideas on the signal and image sciences in a comfortable intellectual environment, has grown over the last two years with the opening of a Reference Library (located in Building 272). The Technical Program for the 1996 Workshop include a variety of efforts in the Imaging Sciences including applications in the Microwave Imaging, highlighted by the Micro-Impulse Radar (MIR) system invented at LLNL, as well as other applications in this area. Special sessions organized by various individuals in Speech, Acoustic Ocean Imaging, Radar Ocean Imaging, Ultrasonic Imaging, and Optical Imaging discuss various applica- tions of real world problems. For the more theoretical, sessions on Imaging Algorithms and Computed Tomography were organized as well as for the more pragmatic featuring a session on Imaging Systems.

1995 building energy codes and standards workshops: Summary and documentation

Energy Technology Data Exchange (ETDEWEB)

Sandahl, L.J.; Shankle, D.L.

1996-02-01

During the spring of 1995, Pacific Northwest National Laboratory (PNNL) conducted four two-day Regional Building Energy Codes and Standards workshops across the US. Workshops were held in Chicago, Denver, Rhode Island, and Atlanta. The workshops were designed to benefit state-level officials including staff of building code commissions, energy offices, public utility commissions, and others involved with adopting/updating, implementing, and enforcing building energy codes in their states. The workshops provided an opportunity for state and other officials to learn more about residential and commercial building energy codes and standards, the role of the US Department of Energy and the Building Standards and Guidelines Program at Pacific Northwest National Laboratory, Home Energy Rating Systems (HERS), Energy Efficient Mortgages (EEM), training issues, and other topics related to the development, adoption, implementation, and enforcement of building energy codes. Participants heard success stories, got tips on enforcement training, and received technical support materials. In addition to receiving information on the above topics, workshop participants had an opportunity to provide input on code adoption issues, building industry training issues, building design issues, and exemplary programs across the US. This paper documents the workshop planning, findings, and follow-up processes.

Proceedings of the workshop on the PS-spin collider

International Nuclear Information System (INIS)

Mori, Yoshiharu

1993-05-01

This volume is a record of the PS-Spin Collider Workshop which was held at KEK, Jan. 31-Feb.1, 1992. As a future project of the KEK 12-GeV proton synchrotron (KEK-PS), the hadron collider (PS-Collider), has been under discussion. Originally, the PSC was designed for heavy ion beam collisions with the energy range of 5-7 GeV/u. If polarized protons are accelerated in PSC, 19 x 19 GeV collisions are possible. This workshop was proposed to bring together interested experimentalists and accelerator physicists to discuss the case that could be made for polarization physics and the technical feasibility at the PS Spin Collider. More than 30 physicists participated in the workshop and very interesting and useful discussions took place. (author)

Workshop on CEBAF at higher energies

Energy Technology Data Exchange (ETDEWEB)

Isgur, N.; Stoler, P. [eds.

1994-04-01

Since the current parameters of CEBAF were defined almost a decade ago, there has been a remarkably fruitful evolution of our picture of the behavior of strongly interacting matter that apparently could be addressed by CEBAF at higher energies. Favorable technical developments coupled with foresight in initial laboratory planning have now made it feasible to consider approximately doubling CEBAF`s current design energy of 4 GeV to approach 10 GeV at rather modest cost. The purpose of the workshop, sponsored by the CEBAF User Group, was to begin to develop the next phase of CEBAF`s program by giving the entire community the opportunity to participate in defining the future of our field, and in particular the physics accessible with an upgraded CEBAF energy. It is intended that this report mark the first step toward an ultimate goal of defining a physics program that will form the basis for an upgrade of CEBAF. The report begins with a brief overview of the workshop`s conclusions. Its body consists of sections corresponding to the workshop`s Working Groups on Hadron Spectroscopy and Production, High Q{sup 2} Form Factors and Exclusive Reactions, Inclusive and Semi-Inclusive Processes, and Hadrons in the Nuclear Medium. Each section begins with the working group summaries and is followed by associated plenary talks summarizing the outstanding physics issues addressable by an upgrade, which are in turn followed by individual contributions presenting specific physics programs. An appendix describes capabilities of CEBAF`s current experimental equipment at higher energies; another appendix lists workshop participants. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Technical Meeting/Workshop on Topical Issues on Infrastructure Development: Managing the Development of a National Infrastructure for Nuclear Power Plants. Presentations

International Nuclear Information System (INIS)

2012-01-01

The main purpose of the TM/Workshop is to provide an opportunity for exchange of specific information on the management of the development of a sustainable national infrastructure for Nuclear Power Plants as it is recommended in the Agency's Milestones approach. Taking into account the actual status of new nuclear power programmes in Member States, this Agency event shall focus on the moving beyond the consideration of the nuclear power and advancing to the next phase, when future partners (Consultants, NPP Vendors, EPC Contractors, etc.) shall be selected and contracted for the first Nuclear Power Plant. The objectives of the Technical Meeting/Workshop are the following: 1. To exchange specific information and to facilitate the management and coordination of the development and implementation of a national infrastructure for nuclear power; 2. To present and discuss case studies, good practices and lessons learned about recent experiences in implementing an appropriate infrastructure for nuclear power, including management methods and self-evaluation processes; 3. To allow participants to improve their knowledge of various aspects of nuclear infrastructure development; and 4. To provide a forum in which participants can discuss common challenges, opportunities for cooperation, concerns and issues their countries face in the infrastructure implementation process.

EPRI steam turbine and generator NDE, life assessment, and maintenance workshop

International Nuclear Information System (INIS)

Nottingham, L.D.; Sabourin, P.F.

1992-10-01

On July 16--19, 1991, the EPRI NDE Center hosted the second EPRI Steam Turbine and Generator NDE, Life Assessment and Maintenance Workshop. This workshop was co-sponsored by the Nuclear Power and the Generation and Storage Divisions of EPRI. Attendees represented all sectors of the industry including utilities, equipment manufacturers, forging suppliers, service organizations, government organizations, insurancecarriers, and consultants from the United States and abroad. Domestic utility presence was again strong, with 105 representatives from 44 utilities in attendance. Australia, Canada, England, Finland, France, Germany, Italy, Japan, Korea, New Zealand, Spain, Sweden and Switzerland were represented in the international contingent. A key and integral part of the workshop was a vendor equipment fair, in which some 23 organizations displayed and demonstrated equipment and services that they offer. Formal presentation of 53 technical papers made up the technical portion of the agenda, which also included two breakout discussion sessions on topical subjects. To provide optimum opportunity for participants to hear all presentations on closely related topics, the sessions were set such that a NDE session ran parallel to the life assessment session. The first NDE session included turbine related topics while the first life assessment session addressed generator issues. The last sessions of the workshop were just reversed with turbine topics being addressed in the life assessment session while generator issues were presented in the NDE session. Presentations on maintenance topics and on monitoring and diagnostics topics were also presented in parallel sessions. These proceedings contain the texts of the papers presented at the workshop. Individual papers in indexed separately

AECB workshop on seismic hazard assessment in Southern Ontario. Program, list of participants and abstracts

International Nuclear Information System (INIS)

1995-01-01

The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: (1) The importance of geological and geophysical observations for the determination of seismic sources, (2) Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information, (3) Methods and data which should be used for characterizing the seismicity parameters of seismic sources, and (4) Methods for assessment of vibratory ground motion hazard. This document presents a copy of the workshop program, the list of participants and extended abstracts received from speakers. It was distributed to the participants prior to the workshop. The abstracts were intended to provide advance information and to afford some basis for meaningful discussion and exchange of information

AECB workshop on seismic hazard assessment in Southern Ontario. Program, list of participants and abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: (1) The importance of geological and geophysical observations for the determination of seismic sources, (2) Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information, (3) Methods and data which should be used for characterizing the seismicity parameters of seismic sources, and (4) Methods for assessment of vibratory ground motion hazard. This document presents a copy of the workshop program, the list of participants and extended abstracts received from speakers. It was distributed to the participants prior to the workshop. The abstracts were intended to provide advance information and to afford some basis for meaningful discussion and exchange of information.

Workshop on meteorological aspects of emergency-response plans for nuclear power plants

International Nuclear Information System (INIS)

SethuRaman, S.; Tichler, J.; Patrinos, A.; Dabbert, W.F.; Ludwig, F.L.; Ruff, R.E.

1982-08-01

The workshop was organized into five short introductory technical sessions, followed by working sessions. The technical sessions provided an overview of the state of the art in health physics; release characteristics; transport, diffusion, and deposition; and operational aspects. Three working groups of approximately 15 members each met for two days to develop specific recommendations and guidance for implementation of the regulatory requirements. The three working groups addressed the themes of health physics and meteorology, release characteristics and meteorology, and dispersion and deposition. This report summarizes the activities and results of both parts of the workshop. The main body of the report is organized in three chapters: an introduction; detailed recommendations of the three working groups; and a summary of the recommendations

Correlated charge-changing uion-atom collisions. Final Technical Report

International Nuclear Information System (INIS)

John Tanis

2005-01-01

This document comprises the final technical report for atomic collisions research supported by DOE grant No. DE-FG02-87ER13778 from September 1, 2001 through August 31, 2004. The research involved the experimental investigation of excitation and charge-changing processes occurring in ion-atom and ion-molecule collisions. Major emphases of the study were: (1) interference effects resulting from coherent electron emission in H2, (2) production of doubly vacant K-shell (hollow ion) states due to electron correlation, and (3) formation of long-lived metastable states in electron transfer processes. During the period of the grant, this research resulted in 23 publications, 12 invited presentations, and 39 contributed presentations at national and international meetings and other institutions. Brief summaries of the completed research are presented below

FERMI(at)Elettra FEL Design Technical Optimization Final Report

International Nuclear Information System (INIS)

Fawley, William; Penn, Gregory; Allaria, Enrico; De Ninno, Giovanni; Graves, William

2006-01-01

This is the final report of the FEL Design Group for the Technical Optimization Study for the FERMI(at)ELETTRA project. The FERMI(at)ELETTRA project is based on the principle of harmonic upshifting of an initial ''seed'' signal in a single pass, FEL amplifier employing multiple undulators. There are a number of FEL physics principles which underlie this approach to obtaining short wavelength output: (1) the energy modulation of the electron beam via the resonant interaction with an external laser seed (2) the use of a chromatic dispersive section to then develop a strong density modulation with large harmonic overtones (3) the production of coherent radiation by the microbunched beam in a downstream radiator. Within the context of the FERMI project, we discuss each of these elements in turn

Proceedings of the Digital Systems Reliability and Nuclear Safety Workshop

Energy Technology Data Exchange (ETDEWEB)

Wallace, D. R.; Cuthill, B. B.; Ippolito, L. M. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Beltracchi, L. [Nuclear Regulatory Commission, Washington, DC (United States) ed.

1994-03-01

The United States Nuclear Regulatory Commission (NRC), in cooperation with the National Institute of Standards and Technology conducted the.Digital Systems Reliability and Nuclear Safety Workshop on September 13--14, 1993, in Rockville, Maryland. The workshop provided a forum for the exchange of information among experts within the nuclear industry, experts from other industries, regulators and academia. The information presented at this workshop provided in-depth exposure of the NRC staff and the nuclear industry to digital systems design safety issues and also provided feedback to the NRC from outside experts regarding identified safety issues, proposed regulatory positions, and intended research associated with the use of digital systems in nuclear power plants. Technical presentations provided insights on areas where current software engineering practices may be inadequate for safety-critical systems, on potential solutions for development issues, and on methods for reducing risk in safety-critical systems. This report contains an analysis of results of the workshop, the papers presented panel presentations, and summaries of, discussions at this workshop. The individual papers have been cataloged separately.

Digital mapping techniques '06 - Workshop proceedings

Science.gov (United States)

Soller, David R.

2007-01-01

The Digital Mapping Techniques `06 (DMT`06) workshop was attended by more than 110 technical experts from 51 agencies, universities, and private companies, including representatives from 27 state geological surveys (see Appendix A of these Proceedings). This workshop was similar in nature to the previous nine meetings, which were held in Lawrence, Kansas (Soller, 1997), Champaign, Illinois (Soller, 1998), Madison, Wisconsin (Soller, 1999), Lexington, Kentucky (Soller, 2000), Tuscaloosa, Alabama (Soller, 2001), Salt Lake City, Utah (Soller, 2002), Millersville, Pennsylvania (Soller, 2003), Portland, Oregon (Soller, 2004), and Baton Rouge, Louisiana (Soller, 2005). This year?s meeting was hosted by the Ohio Geological Survey, from June 11-14, 2006, on the Ohio State University campus in Columbus, Ohio. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. It is with great pleasure that I note that the objective was successfully met, as attendees continued to share and exchange knowledge and information, and renew friendships and collegial work begun at past DMT workshops.Each DMT workshop has been coordinated by the Association of American State Geologists (AASG) and U.S. Geological Survey (USGS) Data Capture Working Group, the latter of which was formed in August 1996 to support the AASG and the USGS in their effort to build a National Geologic Map Database (see Soller, this volume, and http://ngmdb.usgs.gov/info/standards/datacapt/). The Working Group was formed because increased production efficiencies, standardization, and quality of digital map products were needed for the database - and for the State and Federal geological surveys - to provide more high-quality digital maps to the public.At the 2006 meeting, oral and poster presentations and special discussion sessions emphasized: 1) methods for creating and publishing map products (here, "publishing" includes Web-based release); 2) field data

Proceedings of the National Training Workshop on Neonatal Hypothyroidism Screening

International Nuclear Information System (INIS)

Osifo, B.O.A.

2002-05-01

The National Training Workshop on Neonatal Hypothyroidism screening project was conceived in 2000 and was held at the University of Ibadan from May 5 - May 8, 2002. The National Neonatal Hypothyroidism Screening project is a Technical Cooperation Project between the International Atomic Energy Agency and the Federal Government of Nigeria. The Workshop was organized to raise the awareness to the Health related professionals and Policy makers on the importance of screening for Neonatal Hypothyroidism in our country. Neonatal Hypothyroidism is a result of lack of the thyroid hormones in the neonates and this is mostly due to iodine deficiency in our environment - both in the soil and water. This lack of thyroid hormones in the neonates if not treated leads to a serious disease known as Cretinism. Cretinism affects both the mental and physical developments of these children. This Training Workshop focussed on the importance of the Screening programme for all urgent treatment. The Workshop also showed clearly that lack of care and treatment of such neonates in Nigeria so as to identify the neonates that need urgent treatment. The Workshop also showed clearly that lack of care and treatment of such neonates would have a profound detrimental effect on the social and economical development of Nigeria. The spread of Iodine Deficiency in our country is nation wide. It is not based on political zoning system. Rather, Cretinism is a problem in our country and the participants are convinced that it can be prevented by the support of the Federal Government in the form of the provision of Transportation for the three centres in the country - Ibadan, Jos and Port-Harcourt, for collection of blood specimens and regular Counterpart Funding for this IAEA project. The organizers of this Workshop will like to express their sincere thanks to International Atomic Energy Agency who not only supplies all the equipment and reagents for this national project but also funded this National

Proceedings of the Third International Workshop on Jointed Structures.

Energy Technology Data Exchange (ETDEWEB)

Starr, Michael James; Brake, Matthew Robert; Segalman, Daniel Joseph; Bergman, Lawrence A.; Ewins, David J.

2013-08-01

The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics.

Engineer exchanging project on coal mine technology field in fiscal 1999. International information exchanging project (the overseas workshop in Vietnam); 1999 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Vietnam)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Technical information exchange was performed with Vietnamese engineers related to coal mine technologies through the overseas workshop and the technical tour. At the same time, investigations were executed on the production technology levels and needs in Vietnam, and on possibilities of transfer of Japanese technologies. The 'Overseas workshop (Vietnam)' was held on September 28, 1999 with the 'trends and problems in coal production technologies' as the main theme. Lectures were given in the session related to coal production technologies by Vietnamese coal technology experts, each from VINACOAL and IMSAT, and by two Japanese coal technology experts. A comprehensive discussion was also executed, and items of technical information were exchanged on the coal production technologies. The number of persons actually participated in the workshop counted 58, with the proceedings presented by them distributed. The Mao Khe and Duong Huy coal mines in Quang Ninh Province were visited as the technical tour, whereas the coal mine sites were inspected and opinions were exchanged with the site engineers. Gas analysis was performed in the Mao Khe mine from the viewpoint of a gas control technology, and site investigation was carried out on lock bolts in the Duong Huy mine from the viewpoint of a roof control technology. (NEDO)

SIMS study on statistics and environmental factors in health. Final technical report to Department of Energy

International Nuclear Information System (INIS)

1982-07-01

This final technical report to DOE consists of five individual technical reports and one working paper by members of the SIMS Study at Stanford. Research topics include testing goodness-of-fit for the distribution of errors in regression models, mathematical models of cancer and their use in risk assessment, pollutant standards index (Psi), osteosarcomas among beagles exposed to 239 Plutonium, air pollution and respiratory disease, and models of human exposure to air pollution. Individual summaries of the six reports are indexed separately

Proceedings of the Task 2 workshop Waste Isolation Safety Assessment Program

International Nuclear Information System (INIS)

Bradley, D.J.

1979-01-01

The reports from the workshop on waste form release rate analysis are presented. The workshop started with overview presentations on the Office of Nuclear Waste Isolation (ONWI), the Waste Isolation Safety Assessment Program (WISAP), WISAP Task 2 (Waste Form Release Rate Analysis), and WISAP Task 4 (Sorption/Desorption Analysis). Technical presentations followed in these areas: leaching studies on spent fuels, leaching studies on high-level waste glass, waste form surface science experiments, radiation effects, and leach modeling. Separate abstracts were prepared for each

Proceedings of the Task 2 workshop Waste Isolation Safety Assessment Program

Energy Technology Data Exchange (ETDEWEB)

Bradley, D.J.

1979-01-01

The reports from the workshop on waste form release rate analysis are presented. The workshop started with overview presentations on the Office of Nuclear Waste Isolation (ONWI), the Waste Isolation Safety Assessment Program (WISAP), WISAP Task 2 (Waste Form Release Rate Analysis), and WISAP Task 4 (Sorption/Desorption Analysis). Technical presentations followed in these areas: leaching studies on spent fuels, leaching studies on high-level waste glass, waste form surface science experiments, radiation effects, and leach modeling. Separate abstracts were prepared for each.

NASA Workshop on Hybrid (Mixed-Actuator) Spacecraft Attitude Control

Science.gov (United States)

Dennehy, Cornelius J.; Kunz, Nans

2014-01-01

At the request of the Science Mission Directorate Chief Engineer, the NASA Technical Fellow for Guidance, Navigation & Control assembled and facilitated a workshop on Spacecraft Hybrid Attitude Control. This multi-Center, academic, and industry workshop, sponsored by the NASA Engineering and Safety Center (NESC), was held in April 2013 to unite nationwide experts to present and discuss the various innovative solutions, techniques, and lessons learned regarding the development and implementation of the various hybrid attitude control system solutions investigated or implemented. This report attempts to document these key lessons learned with the 16 findings and 9 NESC recommendations.

Proceedings of the Second Noncontact Temperature Measurement Workshop

Science.gov (United States)

Hale, Robert R. (Editor)

1989-01-01

The state of the art in noncontact temperature measurement (NCTM) technology was reviewed and the NCTM requirements of microgravity materials processing community identified. The workshop included technical presentations and discussions which ranged from research on advanced concepts for temperature measurement to laboratory research and development regarding measurement principles and state-of-the-art engineering practices for NCTM methodology in commercial and industrial applications. Technical presentations were made concerning: NCTM needs as perceived by several NASA centers, recent ground-based NCT, research and development of industry, NASA, academia, and selected national laboratories, work-in-progress communication, and technical issues of the implementation of temperature measurement in the space environment to facilitate future U.S. materials science investigations.

Progeny testing: proceedings of servicewide genetics workshop

Science.gov (United States)

Dick Miller

1984-01-01

The primary objective of this workshop was to discuss in detail the state- of-the-art of progeny testing. All aspects, from setting objectives through data collection and analysis, was be covered. We all know progeny testing is a highly technical phase of our tree improvement programs. Each task is critical and must be performed accurately and within a prescribed time...

Second ANS workshop on the safety of Soviet-designed nuclear power plants. Summary report

International Nuclear Information System (INIS)

Bari, R.A.

1995-03-01

The Second American Nuclear Society Workshop on the Safety of Soviet-Designed Nuclear Power Plants was held in Washington, DC, in November, 1994. The Workshop consisted of both plenary sessions and working sessions with three hundred participants overall. All countries with operating Soviet-Designed nuclear power plants were represented and representatives from several other countries also participated. In addition to the status and plans related to technical issues, the Workshop also included discussions of economic, political, legal, and social issues as they relate to the safety of these nuclear power plants

Final Technical Report DOE/GO/13142-1

Energy Technology Data Exchange (ETDEWEB)

Patrick Mulvihill; Quang Nguyen

2010-09-15

This research adds to the understanding of the areas of residual starch and biomass conversion to alcohol, by providing data from pilot plant equipment of larger scale than the minimum required to give commercially scalable data. Instrumentation and control is in place to capture the information produced, for economic and technical evaluation. The impact of rheology, recycle streams, and residence time distributions on the technical and economic performance can be assessed. Various processes can be compared technically and economically because the pilot plants are readily modifiable. Several technologies for residual starch yield improvement have been identified, implemented, and patent applications filed. Various biomass-to-ethanol processes have been compared and one selected for technical optimization and commercialization. The technical and economic feasibility of the current simplified biomass conversion process is being confirmed by intensive pilot plant efforts as of this writing. Optimization of the feedstock handling and pretreatment is occurring to increase the alcohol yield above the minimum commercially viable level already demonstrated. Samples of biomass residue and reactor blowdown condensate are being collected to determine the technical and economic performance of the high-water-recycle waste treatment system being considered for the process. The project is of benefit to the public because it is advancing the efforts to achieve low-cost fermentable substrates for conversion to transportation fuels. This process combines the hydrolysis of agricultural residues with novel enzymes and organisms to convert the sugars released to transportation fuels. The process development is taking place at a scale allowing commercial development to proceed at a rapid pace.

Technical Support and Transfer of Geothrmal Technical Knowledge and Information

Energy Technology Data Exchange (ETDEWEB)

John W. Lund; Toni" Boyd

2007-11-14

The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

Proceedings of the 1982 summer workshop on proton decay experiments

International Nuclear Information System (INIS)

Ayres, D.S.

1982-01-01

Separate abstracts were prepared for 18 of the 21 papers presented. Three papers were previously included in the data base. Also included in the proceedings are a workshop summary, working group reports, and a report of the Technical assessment Panel on Proton Decay

76 FR 17413 - Contract Reporting Requirements of Intrastate Natural Gas Companies; Notice of Technical Workshop...

Science.gov (United States)

2011-03-29

... information from potential attendees to help prepare for the workshop. \\1\\ Form No. 549D was assigned OMB.../docs-filing/forms/form-549d/form-549d-schema.xsd ) file. This workshop is not intended to lead to any...-549d/form-549d.pdf (2) Data dictionary and instructions in the Appendix of Order 735-A (3) XML Schema...

Purpose of the workshop

International Nuclear Information System (INIS)

Brunner, H.

1998-01-01

The main purpose of the Workshop is to share the experience on emergency data management and to review various conceptual, technical, organisational and operational aspects and problems. The problems posed by hardware and software, the interplay of software developers and users/operators and the positive and negative experiences both from development and operation of data management systems are discussed. Emergency data management systems and their demonstrations are divided into four classes of possible applications: video games, training and simulation systems, 'history writing' = post-event analysis and documentation systems, real-time operational systems. (author)

Workshop objectives and structure

International Nuclear Information System (INIS)

2004-01-01

The overall aim of the Workshop was to create a platform in order to better understand different approaches to managing uncertainty in post-closure safety cases and regulatory approaches in different national waste management programmes. The principal objectives of the Workshop were to: - To identify common elements in different approaches for managing uncertainty. - To facilitate information exchange and to promote discussion on different technical approaches to the management and characterisation of uncertainty and on the role of risk. - To explore the merits of alternative approaches to risk-informed decision making. - To identify the potential for further developments of methods or strategies to support the management of uncertainties. The workshop was organised into plenary sessions and working group discussions: The first plenary session focused on establishing a framework for understanding the management of uncertainties and the use of risk. It comprised oral presentations drawing on a range of experience from both active participants in the development and assessment of safety cases and keynotes presentations by external participants involved in risk management in other sectors. The working group discussions covered three technical themes: Risk management and decision making. Regulatory requirements and review of uncertainty and risk in safety cases. Practical approaches and tools for the management of uncertainties and the assignment of probabilities, the use of expert judgements, and the presentation of information on uncertainties and risk were examined. The aim of the working groups was to develop an understanding of the specific issues, and to identify any further activities that will support the development and/or evaluation of safety cases. The round up plenary session brought together information and conclusions from each of the working groups. Common elements in the different approaches to treating uncertainty and risk were identified, along with

Proceedings of the fourth annual geothermal conference and workshop

Energy Technology Data Exchange (ETDEWEB)

1980-12-01

Thirty-eight papers are included. One was indexed previously for EDB. Separate abstracts were prepared for thirty-three papers and two were listed by title. Reports of two workshop discussion groups on Achieving Technical Performance and Obtaining a License and Protecting the Environment were not abstracted for EDB. (MHR)

African Network Operators Group (AfNOG) Training Workshops and ...

International Development Research Centre (IDRC) Digital Library (Canada)

The African Network Operators Group (AfNOG) is a forum for technical cooperation and coordination between African network operators and engineers from the region's universities, research institutions and industry. This year, AfNOG's training workshops and meetings will be held in Rabat, Morocco, between 24 May and 6 ...

Implementation of pesticide applicator certification schools and continuing education workshops : final report.

Science.gov (United States)

2014-12-11

The Oklahoma Department of Transportations (ODOT) herbicide applicator training program consists of initial pesticide applicator training schools followed by independent Certification testing and then on-going yearly continuing education workshops...

Third Annual Workshop on Space Operations Automation and Robotics (SOAR 1989)

Science.gov (United States)

Griffin, Sandy (Editor)

1990-01-01

Papers presented at the Third Annual Workshop on Space Operations Automation and Robotics (SOAR '89), hosted by the NASA Lyndon B. Johnson Space Center at Houston, Texas, on July 25 to 27, 1989, are given. Approximately 100 technical papers were presented by experts from NASA, the USAF, universities, and technical companies. Also held were panel discussions on Air Force/NASA Artificial Intelligence Overview and Expert System Verification and Validation.

Association EURATOM-CEA contributions on workshops 1995

International Nuclear Information System (INIS)

1995-01-01

Two communications were presented at the 4th IAEA Technical Committee Meeting and Joint US-Japan Workshop on Alpha Particles in Fusion Research. The first one more precisely deal with a new method to compute charged fusion products trajectories and with its application to the detection of 3 MeV protons. As far as the second one is concerned, it focuses on the energy measurement of fast ions trapped in the toroidal field ripple of Tore Supra during ICRF heating. Five communications were presented at the workshop on transport, chaos and plasma physics that took place in Marseilles in July 1995. They include experiments such as the stochastic boundary ones, which showed that an external magnetic perturbation does provide a control of the edge plasma. It is also shown that in a static stochastic magnetic field, magnetic lines experience exponential separation and magnetic diffusion. The radial correlation length of an electrostatic drift wave turbulence is determined analytically in various regimes. It is finally investigated how internal magnetic turbulence reacts to variation of plasma current, density, and radio frequency heating power. Two communications were presented at the 5th International Colloquium on Atomic Spectra and Oscillator Strengths for Astrophysical and Laboratory Plasmas which took place in Meudon in August 1995. It describes more precisely the use of X-ray spectroscopy on the Tore Supra Tokamak for plasma diagnostics and atomic physics, as well as the influence of charge exchange reactions on ionization balance and power losses for the same device. (TEC). 74 refs., 55 figs., 2 tabs

Association EURATOM-CEA contributions on workshops 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

Two communications were presented at the 4th IAEA Technical Committee Meeting and Joint US-Japan Workshop on Alpha Particles in Fusion Research. The first one more precisely deal with a new method to compute charged fusion products trajectories and with its application to the detection of 3 MeV protons. As far as the second one is concerned, it focuses on the energy measurement of fast ions trapped in the toroidal field ripple of Tore Supra during ICRF heating. Five communications were presented at the workshop on transport, chaos and plasma physics that took place in Marseilles in July 1995. They include experiments such as the stochastic boundary ones, which showed that an external magnetic perturbation does provide a control of the edge plasma. It is also shown that in a static stochastic magnetic field, magnetic lines experience exponential separation and magnetic diffusion. The radial correlation length of an electrostatic drift wave turbulence is determined analytically in various regimes. It is finally investigated how internal magnetic turbulence reacts to variation of plasma current, density, and radio frequency heating power. Two communications were presented at the 5th International Colloquium on Atomic Spectra and Oscillator Strengths for Astrophysical and Laboratory Plasmas which took place in Meudon in August 1995. It describes more precisely the use of X-ray spectroscopy on the Tore Supra Tokamak for plasma diagnostics and atomic physics, as well as the influence of charge exchange reactions on ionization balance and power losses for the same device. (TEC). 74 refs., 55 figs., 2 tabs.

Summary of activities of the life cycle costing workshop conducted by the Environmental Restoration Program of Oak Ridge National Laboratory

International Nuclear Information System (INIS)

1992-08-01

A five-day life cycle workshop was conducted by the Environmental Restoration (FR) Program of Oak Ridge National Laboratory (ORNL) to develop appropriate remediation scenarios for each Waste Area Grouping (WAG) at ORNL and to identify associated data needs (e.g., remedial investigations, special studies, and technology demonstrations) and required interfaces. Workshop participants represented the Department of Energy, Martin Marietta Energy Systems, Inc., Bechtel National, Radian Corporation, EBASCO Corporation, and M-K Ferguson. The workshop was used to establish a technical basis for remediation activities at each WAG. The workshop results are documented in this report and provide the baseline for estimating the technical scope for each WAG. The scope and associated budgets and schedules will be summarized in baseline reports for each WAG, which, in turn, will be compiled into an overall strategy document for ORNL ER

Proceedings of the IEA-technical workshop for an international fusion materials irradiation facility. IEA-implementing agreement for a programme of research and development on fusion materials

International Nuclear Information System (INIS)

Ehrlich, K.; Lindau, R.

1995-07-01

The workshop was initiated to deal with the following objectives: (1) Critical review of the requirements for IFMIF from the user's point of view; (2) Definition of a baseline concept for the CDA-study; (3) Formation of working groups for main fields of activities; (4) Identification of tasks and critical issues for main components; (5) Development of a working break-down structure, distribution of work and milestones for CDA-activities; (6) Documentation of main results. According to the enclosed agenda the mission for a Conceptual Design Study, the requirements for an intense neutron source from the user's point of view and the baseline concept for an accelerator-driven D-Li neutron source were discussed in several plenary sessions. In three subgroups (SG 1 Accelerators, SG2 Lithium Target and SG3 Users and Test Cell) technical concepts for the different components and facilities were discussed in detail, critical issues and tasks for the concept study were identified. Finally, the sharing of tasks to the different national parties, questions of organisation of the work, flow of information and definition of milestones was agreed upon. The detailled summary reports of the subgroups and the contributions of the plenary sessions are presented in the proceedings. (orig./HP)

Development of an Interdisciplinary Workshop in Urban Transportation. Final Substantive Report.

Science.gov (United States)

Foa, Joseph V.

This project has developed an interdisciplinary graduate workshop in transportation engineering to acquaint students with problems of urban transportation and the role of various disciplines in dealing with these problems. It provides an opportunity for students from the fields of engineering, urban and regional planning, and economics to interact…

Why Are Faculty Development Workshops a Waste of Time?

Science.gov (United States)

Berk, Ronald A.

2010-01-01

This article discusses how to design and execute a faculty development workshop. The author first describes the characteristics of the faculty development event that can sabotage or facilitate attendance. They relate to: (a) format and frequency; (b) venues; (c) technical support; and (d) competing activities. Then, the author presents ten…

Scientific-technical exchange of experiences between Germany and the GUS, the Baltic and MOE states, and central Asia and other regions. Workshop and establishment of a common knowledge base for nuclear safety and security. Final report; Wissenschaftlich-technischer Erfahrungsaustausch Deutschlands mit der GUS, den Baltischen und den MOE-Staaten sowie Laendern Zentralasiens und anderer Regionen. Arbeitstreffen und Schaffung gemeinsamer Wissensbasen fuer nukleare Sicherheit und Sicherung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Dabrowski, Anna

2017-03-15

The report on the workshop concerning scientific-technical exchange of experiences between Germany and the GUS, the Baltic and MOE states, and central Asia and other regions includes the following issues: Results an d success of know-how transfer from West to East, topical issues for mutual exchange of experience, scope of the project, concept of the realization of mutual exchange of experiences. The emphasis of the workshop covered the following issues: emergency preparedness, international requirements concerning nuclear safety and radiation protection, transport of radioactive wastes and communication in nuclear technology.

GKSS-workshop: contaminated sludges. Treatment and utilization fine graned residues; GKSS-Workshop: Kontaminierte Schlaemme. Behandlung und Nutzungsmoeglichkeiten feinkoerniger Reststoffe

Energy Technology Data Exchange (ETDEWEB)

Alvermann, G.; Luther, G.; Niemeyer, B. [eds.] [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Zentralabteilung Technikum

2000-07-01

New regulations, such as the materials recycling act, soil protection act and unsolved problems related to the treatment of contaminated sludges, the utilisation of the gained products demand the development of innovative techniques for industrial, dredged or drilling sludges. The workshop offered a platform for intensive discussions between representatives of industry, research institutions, associations, and authorities. The main aim of the workshop was the presentation of fundamental background of sludge processing and advanced technical solutions. The available proceedings contain 21 lectures held on the workshop with the following ranges of topics of the sludge treatment: legislation, R and D-funding, technological bases, decontamination processes, dewatering and drying processes, recycling and immobilization. (orig.) [German] Neue Gesetze wie das Kreislaufwirtschafts- oder das Bundes-Bodenschutzgesetz und anstehende Probleme bei der Beseitigung belasteter Schlaemme - zum Beispiel Industrie-, Bohr- und Baggergutschlaemme - erfordern die Entwicklung innovativer Techniken zu ihrer Aufbereitung, Reinigung bzw. Verwertung. Der Workshop bot ein Formung zur intensiven Diskussion zwischen Industrie, Forschung, Verbaenden und Behoerden. Ziel war es, unterschiedliche Methoden der Schlammbehandlung zu eroertern, Loesungswege aufzuzeigen und Moeglichkeiten fuer Kooperationen zu erarbeiten. Der vorliegende Band enthaelt Beitraege der Referenten, die sich auf folgende Themenbereiche der Schlammbehandlung konzentrieren: juristische Aspekte, Foerdermoeglichkeiten, Grundlagen, Aufbereitung von Schlaemmen, Entwaesserung und Trocknung von Schlaemmen, Verwertung und Immobilisierung. (orig.)

Hands-On Surgical Training Workshop: an Active Role-Playing Patient Education for Adolescents.

Science.gov (United States)

Wongkietkachorn, Apinut; Boonyawong, Pangpoom; Rhunsiri, Peera; Tantiphlachiva, Kasaya

2017-09-01

Most patient education involves passive learning. To improve patient education regarding surgery, an active learning workshop-based teaching method is proposed. The objective of this study was to assess level of patient surgical knowledge, achievement of workshop learning objectives, patient apprehension about future surgery, and participant workshop satisfaction after completing a surgical training workshop. A four-station workshop (surgical scrub, surgical suture, laparoscopic surgery, and robotic surgery) was developed to teach four important components of the surgical process. Healthy, surgery-naive adolescents were enrolled to attend this 1-h workshop-based training program. Training received by participants was technically and procedurally identical to training received by actual surgeons. Pre- and post-workshop questionnaires were used to assess learning outcomes. There were 1312 participants, with a mean age 15.9 ± 1.1 years and a gender breakdown of 303 males and 1009 females. For surgical knowledge, mean pre-workshop and post-workshop scores were 6.1 ± 1.5 and 7.5 ± 1.5 (out of 10 points), respectively (p education is an effective way to improve understanding of surgery-related processes. This teaching method may also decrease apprehension that patients or potential patients harbor regarding a future surgical procedure.

Workshop on the RHIC performance

Energy Technology Data Exchange (ETDEWEB)

Khiari, F.; Milutinovic, J.; Ratti, A.; Rhoades-Brown, M.J. (eds.)

1988-07-01

The most recent conceptual design manual for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven was published in May 1986 (BNL 51932). The purpose of this workshop was to review the design specifications in this RHIC reference manual, and to discuss in detail possible improvements in machine performance by addressing four main areas. These areas are beam-beam interactions, stochastic cooling, rf and bunch instabilities. The contents of this proceedings are as follows. Following an overview of the workshop, in which the motivation and goals are discussed in detail, transcripts of the first day talks are given. Many of these transcripts are copies of the original transparencies presented at the meeting. The following four sections contain contributed papers, that resulted from discussions at the workshop within each of the four working groups. In addition, there is a group summary for each of the four working groups at the beginning of each section. Finally, a list of participants is given.

Third EC/ISOE workshop on occupational exposure management at nuclear power plants

International Nuclear Information System (INIS)

Bone, Mike; Morris, Simon

2002-01-01

The third workshop was jointly sponsored by the IAEA and OECD Nuclear Energy Agency. It was organised by the European Commission Directorate-General for the Environment, Nuclear Safety and Civil Protection and the ISOE European Regional Technical Centre. The workshop provided a forum for Health Physics practitioners and operators to exchange information and experience on occupational exposure issues at Nuclear Power Plants (NPPs). There were approximately 130 participants of whom 63% were from utilities, 11% from contractors and 26% from regulatory bodies

DOE FINAL TECHNICAL REPORT RP

Energy Technology Data Exchange (ETDEWEB)

RUSS PETERMAN

2012-01-01

The City of Georgetown Utility Systems (GUS) patnered with the private sector, the American Public Power Association (APPA) and Southwestern University to design, construct, test and monitor a solar co-generation system directly connected to the GUS electric distribution system. This report consists of the Primary Technical Report and 3 attachments.

Nuclear Fuel Behaviour during Reactivity Initiated Accidents. Workshop Proceedings

International Nuclear Information System (INIS)

2010-01-01

A reactivity initiated accident (RIA) is a nuclear reactor accident that involves an unwanted increase in fission rate and reactor power. The power increase may damage the reactor core. The main objective of the workshop was to review the current status of the experimental and analytical studies of the fuel behavior during the RIA transients in PWR and BWR reactors and the acceptance criteria for RIA in use and under consideration. The workshop was organized in an opening session and 5 technical sessions: 1) Recent experimental results and experimental techniques used; 2) Modelling and Data Interpretation; 3) Code Assessment; 4) RIA Core Analysis and 5) Revision and application of safety criteria

The first Latin American workshop on professional skills for young female scientists

Science.gov (United States)

Ávila, A.; Meza-Montes, Lilia; Ponce-Dawson, Silvina

2015-12-01

To effectively build capacity for research and training in science, technology, engineering, and mathematics (STEM) across Latin America and the Caribbean, a gender perspective must be factored in. Working from an awareness of the gender situation as well as of the multiple personal challenges experienced due to gender disparity, a group of Latin American female scientists organized a workshop with the goal of empowering young female scientists and assessing the challenges they face. In this paper we summarize the outcomes of the workshop, highlighting the barriers that are common in the region. Among other aspects, the workshop stressed the need for resource platforms for finding technical and professional networks, jobs, and scholarships.

Summary and Findings from the NREL/DOE Hydrogen Sensor Workshop (June 8, 2011)

Energy Technology Data Exchange (ETDEWEB)

Buttner, W.; Burgess, R.; Post, M.; Rivkin, C.

2012-07-01

On June 8, 2011, DOE/NREL hosted a hydrogen sensor workshop attended by nearly forty participants from private organizations, government facilities, and academic institutions . The workshop participants represented a cross section of stakeholders in the hydrogen community, including sensor developers, end users, site safety officials, and code and standards developers. The goals of the workshop were to identify critical applications for the emerging hydrogen infrastructure that require or would benefit from hydrogen sensors, to assign performance specifications for sensor deployed in each application, and to identify shortcomings or deficiencies (i.e., technical gaps) in the ability of current sensor technology to meet the assigned performance requirements.

Technical support document for the surface disposal of sewage sludge. Final report

International Nuclear Information System (INIS)

1992-11-01

The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the surface disposal of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in sewage sludge placed on surface disposal sites. The management practices associated with surface disposal are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through surface disposal are discussed

Technical support document for the surface disposal of sewage sludge. Final report

Energy Technology Data Exchange (ETDEWEB)

1992-11-01

The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the surface disposal of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in sewage sludge placed on surface disposal sites. The management practices associated with surface disposal are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through surface disposal are discussed.

Research and Development Issues for Interactive Electronic Technical Manuals

National Research Council Canada - National Science Library

Ricci, Katrina

2002-01-01

... technologies to support Interactive Electronic Technical Manuals (IETMs). A workshop was conducted at the NAVAIR Orlando, Training Systems Division to discuss the domain and to present current research in this area...

Report on the Imaging Workshop for the Genomes to Life Program, April 16-18, 2002

Energy Technology Data Exchange (ETDEWEB)

Colson, STEVEN

2003-08-04

This report is a result of the Imaging Workshop for the Genomes to Life (GTL) program held April 16-19, 2002, in Charlotte, North Carolina. The meeting was sponsored by the Office of Biological and Environmental Research and the Office of Advanced Scientific Computing Research of the U.S. Department of Energy's (DOE) Office of Science. The purpose of the workshop was to project a broad vision for future needs and determine the value of imaging to GTL program research. The workshop included four technical sessions with plenary lectures on biology and technology perspectives and technical presentations on needs and approaches as they related to the following areas of the GTL program: (1) Molecular machines (protein complexes); (2) Intracellular and cellular structure, function, and processes; (3) Multicellular: Monoclonal and heterogeneous multicellular systems, cell-cell signaling, and model systems; and (4) Cells in situ and in vivo: Bacteria in the natural environment, microenvironment, and in vivo systems.

Results of the joint ESARDA/INMM workshop on science and modern technology for safeguards

International Nuclear Information System (INIS)

Stein, G.; Dupree, S.; Sonnier, C.

1997-01-01

The Joint ESARDA/INMM Workshop on Science and Modem Technology for Safeguards was held in Arona, Italy, October 28-31, 1996. It was attended by some 120 participants, consisting principally of scientists from various disciplines and safeguards experts from the inspectorates. The Workshop provided a full discussion on the near and far term scientific technologies that may be applied to safeguards. In addition, there were extended discussions on the social and political aspects surrounding the areas of Nonproliferation, International Safeguards, and Regional Safeguards. The general opinion was that the Workshop met and exceeded its goals, setting the stage for future workshops of this type. One of the outstanding characteristics of this Workshop was the ample amount of time allowed for full discussion of each presentation, both for technical issues and social/political issues. This procedure was substantially different from the usual ESARDA and INMM meetings. This paper will discuss the organization and conduct of the Workshop, as well as the results as reported by the four Working Group Chairs and the Workshop Co-chairs

CNRA/CSNI workshop on licensing and operating experience of computer-based I and C systems - Summary and conclusions

International Nuclear Information System (INIS)

2002-01-01

The OECD Workshop on Licensing and Operating Experience of Computer-Based I and C Systems, was sponsored by both the Committee on Nuclear Regulatory Activities (CNRA) and the Committee on the Safety of Nuclear Installations (CSNI) of the OECD Nuclear Energy Agency (NEA). It was organised in collaboration with the Czech State Office for Nuclear Safety (SUJB), the Czech Power Board CEZ a.s., I and C Energo a.s. and the Nuclear Research Institute, Rez near Prague. The objectives of the Workshop were to exchange the experience gained by both the regulators and the industry in different countries in the licensing and operation of computer-based I and C systems, to discuss the existing differences in their licensing approaches in various countries, to consider the safety aspects of their practical use, and to discuss the ways of promoting future international co-operation in the given area. The scope of the Workshop included: - review of the progress made since the CNRA/CSNI workshop which was held in 1996 - current and future regulatory needs and/or requirements for the computer-based I and C systems - progress made in software life cycle activities, including verification and validation, and safety/hazards analysis - benefits of applying the computer-based I and C systems to improve plant performance and safety. The Technical Sessions and Discussion Sessions covered the following topics: Opening Session: Advances made in the use and planning of computer-based I and C systems; Topic 1: National and international standards and guides for computer-based safety systems; Topic 2: Regulatory aspects; Topic 3: Analysis and assessment of digital I and C systems; Topic 4: Software life cycle activities; Topic 4: Experience with applications, system aspects, potential limits and future trends and needs; Final Session: Workshop summary. The workshop provided a unique opportunity for people with experience in licensing, developing, manufacturing, implementing, maintaining or

Technical assistance contractor Management Plan. Final [report

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) and its major teaming partners [Roy F. Weston, Inc. (RFW), Sergent, Hauskins & Beckwith Agra, Inc. (SHB Agra), and Geraghty & Miller, Inc. (G&M)]. The first three companies have worked together effectively on the UMTRA Project for more than 10 years. With the initiation of the UMTRA Groundwater Project in April 1991, a need arose to increase the TAC`s groundwater technical breadth and depth, so G&M was brought in to augment the team`s capabilities. The TAC contract`s scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both surface and groundwater projects. The TAC team continues to support the DOE in completing surface remedial actions and initiating groundwater remediation work for start-up, characterization, design, construction oversight, and remedial operations. A key feature of the TAC`s management approach is the extensive set of communication systems implemented for the UMTRA Project. These systems assist all functional disciplines in performing UMTRA Project tasks associated with management, technical support, administrative support, and financial/project controls.

Experimental Program Final Technical Progress Report: 15 February 2007 to 30 September 2012

Energy Technology Data Exchange (ETDEWEB)

Kinney, Edward R. [University of Colorado, Boulder, CO

2014-09-12

This is the final technical report of the grant DE-FG02-04ER41301 to the University of Colorado at Boulder entitled "Intermediate Energy Nuclear Physics" and describes the results of our funded activities during the period 15 February 2007 to 30 September 2012. These activities were primarily carried out at Fermilab, RHIC, and the German lab DESY. Significant advances in these experiments were carried out by members of the Colorado group and are described in detail.

Second Annual Transformative Vertical Flight Concepts Workshop: Enabling New Flight Concepts Through Novel Propulsion and Energy Architectures

Science.gov (United States)

Dudley, Michael R. (Editor); Duffy, Michael; Hirschberg, Michael; Moore, Mark; German, Brian; Goodrich, Ken; Gunnarson, Tom; Petermaier,Korbinian; Stoll, Alex; Fredericks, Bill;

2nd German-Japanese Workshop on Digital Signatures 1999: ATR (Advanced Telecommunications Research Institute International), Kyoto, 21st/22nd of September, 1999

OpenAIRE

Thielmann, H.; Mennicken, J.-B.

2000-01-01

This report contains the proceedings of a second German-Japanese Workshop on digital signatures held in Kyoto, September 21./22. 1999. The workshop aimed at legal, technical and economic aspects of digital signatures as a means to promote electronic commerce. Special attention was devoted to Identification and classification of requirements on the technical platform and requirements for international interoperability, Identification of legal requirements and other social environments that nee...

Instrumentation for Monitoring around Marine Renewable Energy Converters: Workshop Final Report

Energy Technology Data Exchange (ETDEWEB)

Polagye, B. L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Copping, A. E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Brown-Saracino, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suryan, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kramer, S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smith, C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-01-14

To better understand the state of instrumentation and capabilities for monitoring around marine energy converters, the U.S. Department of Energy directed Pacific Northwest National Laboratory and the Northwest National Marine Renewable Energy Center at the University of Washington to convene an invitation-only workshop of experts from around the world to address instrumentation needs.

International workshop on final focus and interaction regions of next generation linear colliders: Proceedings

International Nuclear Information System (INIS)

1992-01-01

The first day of the workshop was devoted to four plenary ''issues'' talks, one for each working group: Beam-Beam Interaction, Detector, Hardware, and Optical Design. The last day was devoted to plenary talks summarizing the activities of the working groups. Each of the three remaining days there,was a short morning plenary devoted to a brief summary of the preceding day and an announcement of planned working group discussions for that day. The transparencies for the ''issues'' and ''summary'' talks are included in this volume, along with some remarks from the working group chairpersons. Very briefly, the beam-beam group continued to address the quantitative study of QED induced backgrounds, and attempted to better understand the nature and prevalence of QCD millijets. The detector group attempted to identify the impact on masking and detector design of the beam-beam backgrounds, the synchrotron radiation induced backgrounds from beam halos and muon backgrounds produced primarily in collimators. Nanosecond timing elements needed in conjunction with multi-bunch operation were discussed. The hardware group addressed the problem of magnet design and support, especially the final doublet magnets suspended within the detector environment, and instrumentation issues, such as high resolution beam position monitors. The optics group discussed new final focus system ideas, collimator design, and improvement of beamline tolerances. If you were not here to participate, we hope that this volume will help you in your orientation to these problems

Digital Mapping Techniques '10-Workshop Proceedings, Sacramento, California, May 16-19, 2010

Science.gov (United States)

Soller, David R.; Soller, David R.

2012-01-01

The Digital Mapping Techniques '10 (DMT'10) workshop was attended by 110 technical experts from 40 agencies, universities, and private companies, including representatives from 19 State geological surveys (see Appendix A). This workshop, hosted by the California Geological Survey, May 16-19, 2010, in Sacramento, California, was similar in nature to the previous 13 meetings (see Appendix B). The meeting was coordinated by the U.S. Geological Survey's (USGS) National Geologic Map Database project. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. It is with great pleasure that I note that the objective was again successfully met, as attendees continued to share and exchange knowledge and information, and renew friendships and collegial work begun at past DMT workshops. At this meeting, oral and poster presentations and special discussion sessions emphasized (1) methods for creating and publishing map products ("publishing" includes Web-based release); (2) field data capture software and techniques, including the use of LiDAR; (3) digital cartographic techniques; (4) migration of digital maps into ArcGIS Geodatabase format; (5) analytical GIS techniques; and (6) continued development of the National Geologic Map Database.

Proceedings of the workshop on the production and use of intense radioactive beams at the Isospin Laboratory

International Nuclear Information System (INIS)

Garrett, J.D.

1992-01-01

These proceedings report the deliberations of a 3 1/2 day workshop on the Production and Use of Intense Radioactive Ion Beams at the Isospin Laboratory, which was held at the Joint Institute for Heavy Ion Research in Oak Ridge, Tennessee, October 1992. The purpose of this workshop was not to duplicate the programs of other recent radioactive ion beam workshops or international conferences that have focused on the scientific concepts which radioactive beams can, and in fact already are, addressing. Instead, the intent was to address the technical problems associated with the construction of the next generation ISOL facility and to initiate a discussion of the type of experimental equipment that should be developed for such a facility. We have tried to bring together in Oak Ridge the world's experts in radioactive targets/ion sources, light and heavy-ion accelerators, and detection systems. After 1 1/2 days of overview presentations, the participants divided into three discussion groups (Experiments with Radioactive Beams, Target Ion Sources and Mass Separation, and Accelerators-Primary and Secondary) for 1 1/2 days of detailed discussions of the most pertinent issues. The final session was devoted to reports from each of the discussion groups and a general discussion of where to go from here. An outgrowth of these discussions was the establishment of working groups to coordinate future technical developments associated with the pertinent issues. The proceedings include the text of all the overview presentations, reports from each discussion group, as well as contributions from those participants who chose to provide the text of their presentations in the discussion groups and the Concluding Remarks. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database

Proceedings of the workshop on the production and use of intense radioactive beams at the Isospin Laboratory

Energy Technology Data Exchange (ETDEWEB)

Garrett, J.D. [ed.

1992-12-31

These proceedings report the deliberations of a 3 1/2 day workshop on the Production and Use of Intense Radioactive Ion Beams at the Isospin Laboratory, which was held at the Joint Institute for Heavy Ion Research in Oak Ridge, Tennessee, October 1992. The purpose of this workshop was not to duplicate the programs of other recent radioactive ion beam workshops or international conferences that have focused on the scientific concepts which radioactive beams can, and in fact already are, addressing. Instead, the intent was to address the technical problems associated with the construction of the next generation ISOL facility and to initiate a discussion of the type of experimental equipment that should be developed for such a facility. We have tried to bring together in Oak Ridge the world`s experts in radioactive targets/ion sources, light and heavy-ion accelerators, and detection systems. After 1 1/2 days of overview presentations, the participants divided into three discussion groups (Experiments with Radioactive Beams, Target Ion Sources and Mass Separation, and Accelerators-Primary and Secondary) for 1 1/2 days of detailed discussions of the most pertinent issues. The final session was devoted to reports from each of the discussion groups and a general discussion of where to go from here. An outgrowth of these discussions was the establishment of working groups to coordinate future technical developments associated with the pertinent issues. The proceedings include the text of all the overview presentations, reports from each discussion group, as well as contributions from those participants who chose to provide the text of their presentations in the discussion groups and the Concluding Remarks. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Workshop ''Radiooncology and law''

International Nuclear Information System (INIS)

Sack, H.; Deutsch, E.; Sauerwein, W.

1998-01-01

From 25 to 27 Sept 1997, a workshop was organized at the Essen Medical School (Universitaetsklinikum Essen), at which radiooncologists and jurists from universities and courts as well as lawyers contributed their views on mutual problems. The following topics were discussed by papers and in round table meetings: 'Requirements on the patient's information', 'definition of therapeutic guidelines - limits of clinical research and standard treatments', 'treatment documentation', 'liability of the physician for treatment faults' and 'technical standard and preserve of quality'. The consensual guidelines to the topics 'patient's information', 'therapeutic guidelines' and 'liability' are presented here. (orig.) [de

Report of the workshop on Aviation Safety/Automation Program

Science.gov (United States)

Morello, Samuel A. (Editor)

1990-01-01

As part of NASA's responsibility to encourage and facilitate active exchange of information and ideas among members of the aviation community, an Aviation Safety/Automation workshop was organized and sponsored by the Flight Management Division of NASA Langley Research Center. The one-day workshop was held on October 10, 1989, at the Sheraton Beach Inn and Conference Center in Virginia Beach, Virginia. Participants were invited from industry, government, and universities to discuss critical questions and issues concerning the rapid introduction and utilization of advanced computer-based technology into the flight deck and air traffic controller workstation environments. The workshop was attended by approximately 30 discipline experts, automation and human factors researchers, and research and development managers. The goal of the workshop was to address major issues identified by the NASA Aviation Safety/Automation Program. Here, the results of the workshop are documented. The ideas, thoughts, and concepts were developed by the workshop participants. The findings, however, have been synthesized into a final report primarily by the NASA researchers.

Report on the value engineering workshop on APS beamline front ends

International Nuclear Information System (INIS)

Kuzay, T.

1993-01-01

A formal value engineering evaluation process was developed to address the front end components of the beamlines for the Advanced Photon Source (APS). This process (described in Section 2) involved an information phase, a creative phase, a judgment phase, a development phase, and a recommendation phase. Technical experts from other national laboratories and industry were invited to a two-day Value Engineering Workshop on November 5-6, 1992. The results of this Workshop are described in Section 4. Following the Workshop, various actions by the APS staff led to the redesign of the front end components, which are presented in Sections 5 and 6. The cost benefit analysis is presented in Section 7. It is important of realize that an added benefit of the Workshop was to obtain numerous design evaluations and enhancements of the front end components by experts in the field. As the design work proceeds to Title II completion, the APS staff is including many of these suggestions

NASA/FAA helicopter simulator workshop

Science.gov (United States)

Larsen, William E. (Editor); Randle, Robert J., Jr. (Editor); Bray, Richard S. (Editor); Zuk, John (Editor)

1992-01-01

A workshop was convened by the FAA and NASA for the purpose of providing a forum at which leading designers, manufacturers, and users of helicopter simulators could initiate and participate in a development process that would facilitate the formulation of qualification standards by the regulatory agency. Formal papers were presented, special topics were discussed in breakout sessions, and a draft FAA advisory circular defining specifications for helicopter simulators was presented and discussed. A working group of volunteers was formed to work with the National Simulator Program Office to develop a final version of the circular. The workshop attracted 90 individuals from a constituency of simulator manufacturers, training organizations, the military, civil regulators, research scientists, and five foreign countries.

Role of the exercises in the training of the technical support center members in Croatia

International Nuclear Information System (INIS)

Jurkovic, I.-A.; Grgic, D.; Skanata, D.

1999-01-01

Since the beginning of 1998, when the modernization of the existing Emergency Plan and Program in Croatia started, lots of things were done and changed. New organizational structure was set up and Technical Support Center (TSC) as a lead technical agency was introduced. Role, obligations and responsibilities of the TSC were defined and appropriate procedures were developed. These activities are more or less the same recommended by the International Atomic Energy Agency (IAEA). As exercises and workshops are important part of all emergency planning and preparedness activities, they also play an important role in out today and future plans. Croatian Off-site Emergency Response Plan (OERP) recognizes three national workshops that are going to be organized every year. The first one was already organized at the beginning of 1998, in February. Second workshop was organized at the beginning of November 1998. Main workshop objective was to train the TSC staff.(author)

Planning for Student Assessment: Participant's Handbook. Bilingual Evaluation Technical Assistance, Workshop III.

Science.gov (United States)

California Univ., Los Angeles. Center for the Study of Evaluation.

This participant's handbook is designed to be used in conjunction with a workshop for planning bilingual student assessment. The following materials are included: (1) simulation materials, including descriptions of simulated programs, tests, test manuals, and printouts; (2) checklists, diagrams, and charts illustrating important points of the…

Workshop on regional cooperation in remote monitoring for transparency and nonproliferation

International Nuclear Information System (INIS)

Olsen, John; Inoue, Naoko; Hori, Masato; Hashimoto, Yu; Mochiji, Toshiro

2006-06-01

The Workshop on Regional Cooperation in Remote Monitoring for Transparency and Nonproliferation on 8-9 February at O'arai, Japan, brought together remote monitoring experts to share technical experience and consider potential uses of remote monitoring for nuclear transparency and strengthened nonproliferation. Sponsored by the Nuclear Nonproliferation Science and Technology Center (NPSTC) of the Japan Atomic Energy Agency (JAEA), this event gathered thirty five attendees from the JAEA, the Republic of Korea's National Nuclear Management and Control Agency (NNCA), the International Atomic Energy Agency (IAEA), and U.S. Department of Energy/National Nuclear Security Administration (DOE/NNSA). U.S. technical experts represented Sandia National Laboratories (SNL) and Los Alamos National Laboratory (LANL). Workshop discussions and interactions met or surpassed all goals: On the technical front, the JAEA, NNCA, and SNL exchanged presentations on their respective uses and technical approaches to remote monitoring. These included systems for both international safeguards and transparency. The IAEA shared valuable guidance on future remote monitoring system requirements. Following the presentations SNL conducted training in remote monitoring for technical personnel. In parallel project planning discussions, the JAEA, NNCA, SNL and the U.S. DOE reaffirmed mutual interest in regional cooperation in remote monitoring that could eventuate in exchange of safeguards-related data. A productive off-the-record session by all parties considered the path forward and established intermediate steps and time scales. The 15 of the presented papers are indexed individually. (J.P.N.)

Workshop 'Reducing the share of drilling in the total cost of geothermal power generation'; Workshop 'Senkung des bohrtechnischen Anteils an den geothermischen Stromgestehungskosten'

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

For a further development of geothermal power generation, technological adaptations of drilling technology will be required that will reduce the specific power generation cost. This workshop discussed the options for adaptation and the resulting cost improvements. Both technical and non-technical issues were tackled. The full-text documents of the workshop (overheads) can be downloaded at http://www.ie-leipzig.de. Subjects were: (1) Downhole engine technology; (2) New drilling equipment in consideration of geothermal requirements; (3) New drilling equipment in consideration of geothermal requirements; (4) Innovative drilling concepts/ Current cost allotment; (5) Higher efficiency in drilling with flushing adapted to drilling horizons; (6) MWD/LWD technologies of the KW industry; (7) Completion technology in geothermal plants; (8) Time and cost planning in drilling plans; (9) Cost-optimized drilling from a drilling contractor's view; (10) Requirements and obstacles in the licensing of new drilling equipment. (orig.)

Technical Report - FINAL

Energy Technology Data Exchange (ETDEWEB)

Barbara Luke, Director, UNLV Engineering Geophysics Laboratory

2007-04-25

Improve understanding of the earthquake hazard in the Las Vegas Valley and to assess the state of preparedness of the area's population and structures for the next big earthquake. 1. Enhance the seismic monitoring network in the Las Vegas Valley 2. Improve understanding of deep basin structure through active-source seismic refraction and reflection testing 3. Improve understanding of dynamic response of shallow sediments through seismic testing and correlations with lithology 4. Develop credible earthquake scenarios by laboratory and field studies, literature review and analyses 5. Refine ground motion expectations around the Las Vegas Valley through simulations 6. Assess current building standards in light of improved understanding of hazards 7. Perform risk assessment for structures and infrastructures, with emphasis on lifelines and critical structures 8. Encourage and facilitate broad and open technical interchange regarding earthquake safety in southern Nevada and efforts to inform citizens of earthquake hazards and mitigation opportunities

Space and Earth Science Data Compression Workshop

Science.gov (United States)

Tilton, James C. (Editor)

1991-01-01

The workshop explored opportunities for data compression to enhance the collection and analysis of space and Earth science data. The focus was on scientists' data requirements, as well as constraints imposed by the data collection, transmission, distribution, and archival systems. The workshop consisted of several invited papers; two described information systems for space and Earth science data, four depicted analysis scenarios for extracting information of scientific interest from data collected by Earth orbiting and deep space platforms, and a final one was a general tutorial on image data compression.

Report of the technical committee meeting on 1996 annual workshop on ASSET experience

International Nuclear Information System (INIS)

1996-01-01

The 1996 ASSET workshop was attended by 27 participants representing 18 countries. This level of support demonstrates the continued interest in the ASSET methodology and in particular the benefit of an International perspective in the analysis of the events at Nuclear Power Plants. Agenda of the meeting and list of participants are included in this report as Attachments 1 and 5 respectively. Papers and/or presentations were made by all countries represented and provided a wide range of views on the use of the ASSET methodology. In general the views of the delegates were positive but inevitably some were critical. The areas of criticism included the perennial problem with the use of the INES ranking procedures to assess event consequences, a perception by some delegates that ASSET is difficult to use and manpower intensive and that the programme for the Peer Review missions is very tight. With the exception of the INES use, the other criticisms were addressed within the working parties that form part of this workshop. The workshop was divided into three task groups to analyse missions at three NPPs, Forsmark, Sweden, Leningrad, Russia and Smolensk, Russia. Although the value of the last mentioned report was limited to the plant's self assessment as the ASSET peer review mission was postponed to later in 1996. Refs, figs, tabs

Report of the technical committee meeting on 1996 annual workshop on ASSET experience

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The 1996 ASSET workshop was attended by 27 participants representing 18 countries. This level of support demonstrates the continued interest in the ASSET methodology and in particular the benefit of an International perspective in the analysis of the events at Nuclear Power Plants. Agenda of the meeting and list of participants are included in this report as Attachments 1 and 5 respectively. Papers and/or presentations were made by all countries represented and provided a wide range of views on the use of the ASSET methodology. In general the views of the delegates were positive but inevitably some were critical. The areas of criticism included the perennial problem with the use of the INES ranking procedures to assess event consequences, a perception by some delegates that ASSET is difficult to use and manpower intensive and that the programme for the Peer Review missions is very tight. With the exception of the INES use, the other criticisms were addressed within the working parties that form part of this workshop. The workshop was divided into three task groups to analyse missions at three NPPs, Forsmark, Sweden, Leningrad, Russia and Smolensk, Russia. Although the value of the last mentioned report was limited to the plant`s self assessment as the ASSET peer review mission was postponed to later in 1996. Refs, figs, tabs.

4. Workshop - Measurement techniques of stationary and transient multiphase flow

International Nuclear Information System (INIS)

Prasser, H.M.

2001-05-01

In November 2000, the 4th Workshop on Measurement Techniques for Stationary and Transient Multiphase Flows took place in Rossendorf. Three previous workshops of this series were national meetings; this time participants from different countries took part. The programme comprised 14 oral presentations, 9 of which are included in these proceedings in full length. A special highlight of the meeting was the main lecture ''Ultrasonic doppler method for bubbly flow measurement'' of Professor Masanori Aritomi, Dr. Hiroshige Kikura and Dr. Yumiko Suzuki. The workshop again dealt with high-resolution phase distribution and phase velocity measurement techniques based on electrical conductivity, ultrasound, laser light and high-speed cinematography. A number of presentations were dedicated to the application of wire-mesh sensors developed by FZR for different applications used by the Technical Universities of Delft and Munich and the Tokyo Institute of Technology. (orig.)

Air-Based Remediation Workshop - Section 8 Air-Based Remediation Technology Selection Logic

Science.gov (United States)

Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...

Promotion of technical harmonisation on risk-based decision making

International Nuclear Information System (INIS)

Kirchsteiger, Christian; Cojazzi, Giacomo

2000-01-01

The EC-JRC International Workshop on Promotion of Technical Harmonisation on Risk-Based Decision Making, held at Stresa and Ispra, Italy, 22-25 May 2000, was an experts meeting to discuss the possible need of developing an internationally accepted generic 'standard' for risk-based decision making.This paper briefly describes the workshop background, its organisation and summarises its main results and conclusions; it reflects the personal opinions of the authors and in no way commits the European Commission. (author)

An Approach to Developing Independent Learning and Non-Technical Skills Amongst Final Year Mining Engineering Students

Science.gov (United States)

Knobbs, C. G.; Grayson, D. J.

2012-01-01

There is mounting evidence to show that engineers need more than technical skills to succeed in industry. This paper describes a curriculum innovation in which so-called "soft" skills, specifically inter-personal and intra-personal skills, were integrated into a final year mining engineering course. The instructional approach was…

Final Technical Report for SISGR: Ultrafast Molecular Scale Chemical Imaging

Energy Technology Data Exchange (ETDEWEB)

Hersam, Mark C. [Northwestern Univ., Evanston, IL (United States). Dept. of Materials Science and Engineering; Guest, Jeffrey R. [Argonne National Lab. (ANL), Argonne, IL (United States). Center for Nanoscale Materials; Guisinger, Nathan P. [Argonne National Lab. (ANL), Argonne, IL (United States). Center for Nanoscale Materials; Hla, Saw Wai [Argonne National Lab. (ANL), Argonne, IL (United States). Center for Nanoscale Materials; Schatz, George C. [Northwestern Univ., Evanston, IL (United States). Dept. of Chemistry; Seideman, Tamar [Northwestern Univ., Evanston, IL (United States). Dept. of Chemistry; Van Duyne, Richard P. [Northwestern Univ., Evanston, IL (United States). Dept. of Chemistry

2017-04-10

The Northwestern-Argonne SISGR program utilized newly developed instrumentation and techniques including integrated ultra-high vacuum tip-enhanced Raman spectroscopy/scanning tunneling microscopy (UHV-TERS/STM) and surface-enhanced femtosecond stimulated Raman scattering (SE-FSRS) to advance the spatial and temporal resolution of chemical imaging for the study of photoinduced dynamics of molecules on plasmonically active surfaces. An accompanying theory program addressed modeling of charge transfer processes using constrained density functional theory (DFT) in addition to modeling of SE-FSRS, thereby providing a detailed description of the excited state dynamics. This interdisciplinary and highly collaborative research resulted in 62 publications with ~ 48% of them being co-authored by multiple SISGR team members. A summary of the scientific accomplishments from this SISGR program is provided in this final technical report.

International Workshop on Characterization and PIE Needs for Fundamental Understanding of Fuels Performance and Safety

Energy Technology Data Exchange (ETDEWEB)

Not Listed

2011-12-01

The International Workshop on Characterization and PIE Needs to Support Science-Based Development of Innovative Fuels was held June 16-17, 2011, in Paris, France. The Organization for Economic Co-operation and Development (OECD), Nuclear Energy Agency (NEA) Working Party on the Fuel Cycle (WPFC) sponsored the workshop to identify gaps in global capabilities that need to be filled to meet projected needs in the 21st century. First and foremost, the workshop brought nine countries and associated international organizations, together in support of common needs for nuclear fuels and materials testing, characterization, PIE, and modeling capabilities. Finland, France, Germany, Republic of Korea, Russian Federation, Sweden, Switzerland, United Kingdom, United States of America, IAEA, and ITU (on behalf of European Union Joint Research Centers) discussed issues and opportunities for future technical advancements and collaborations. Second, the presentations provided a base level of understanding of current international capabilities. Three main categories were covered: (1) status of facilities and near term plans, (2) PIE needs from fuels engineering and material science perspectives, and (3) novel PIE techniques being developed to meet the needs. The International presentations provided valuable data consistent with the outcome of the National Workshop held in March 2011. Finally, the panel discussion on 21st century PIE capabilities, created a unified approach for future collaborations. In conclusion, (1) existing capabilities are not sufficient to meet the needs of a science-based approach, (2) safety issues and fuels behavior during abnormal conditions will receive more focus post-Fukushima; therefore we need to adopt our techniques to those issues, and (3) International collaboration is needed in the areas of codes and standards development for the new techniques.

Hispanic Vocational Exploration Project. Final Report.

Science.gov (United States)

Centro De La Comunidad, Inc., New London, CT.

During its second year, the Hispanic Vocational Exploration Project recruited eighth and ninth grade Hispanic youth for a four-week cycle, after-school, career exploratory program at Southeastern Regional Vocational Technical School, Groton, Connecticut. A series of career education workshops was the other major project activity. Supportive…

Proceedings of the workshop on advanced thermal-hydraulic and neutronic codes: current and future applications

International Nuclear Information System (INIS)

2001-01-01

An OECD Workshop on Advanced Thermal-Hydraulic and Neutronic Codes Applications was held from 10 to 13 April 2000, in Barcelona, Spain, sponsored by the Committee on the Safety of Nuclear Installations (CSNI) of the OECD Nuclear Energy Agency (NEA). It was organised in collaboration with the Spanish Nuclear Safety Council (CSN) and hosted by CSN and the Polytechnic University of Catalonia (UPC) in collaboration with the Spanish Electricity Association (UNESA). The objectives of the Workshop were to review the developments since the previous CSNI Workshop held in Annapolis [NEA/CSNI/ R(97)4; NUREG/CP-0159], to analyse the present status of maturity and remnant needs of thermal-hydraulic (TH) and neutronic system codes and methods, and finally to evaluate the role of these tools in the evolving regulatory environment. The Technical Sessions and Discussion Sessions covered the following topics: - Regulatory requirements for Best-Estimate (BE) code assessment; - Application of TH and neutronic codes for current safety issues; - Uncertainty analysis; - Needs for integral plant transient and accident analysis; - Simulators and fast running codes; - Advances in next generation TH and neutronic codes; - Future trends in physical modeling; - Long term plans for development of advanced codes. The focus of the Workshop was on system codes. An incursion was made, however, in the new field of applying Computational Fluid Dynamic (CFD) codes to nuclear safety analysis. As a general conclusion, the Barcelona Workshop can be considered representative of the progress towards the targets marked at Annapolis almost four years ago. The Annapolis Workshop had identified areas where further development and specific improvements were needed, among them: multi-field models, transport of interfacial area, 2D and 3D thermal-hydraulics, 3-D neutronics consistent with level of details of thermal-hydraulics. Recommendations issued at Annapolis included: developing small pilot/test codes for

Recent trend in coal utilization technology. Coal utilization workshop

Energy Technology Data Exchange (ETDEWEB)

Kim, Chon Ho; Son, Ja Ek; Lee, In Chul; Jin, Kyung Tae; Kim, Seong Soo [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

1995-12-01

The 11th Korea-U.S.A. joint workshop on coal utilization technology was held in somerset, Pennsylvania, U.S.A. from october 2 to 3, 1995. In the opening ceremony, Dr.C. Low-el Miller, associate deputy assistant secretary of office of clean coal technology, U.S.DOE, gave congratulatory remarks and Dr. Young Mok Son, president of KIER, made a keynote address. In this workshop, 30 papers were presented in the fields of emission control technology, advanced power generation systems, and advanced coal cleaning and liquid fuels. Especially, from the Korean side, not only KIER but also other private research institutes and major engineering companies including KEPCO, Daewoo Institute of Construction Technology, Jindo Engineering and Construction Co. Daewoo Institute for Advanced Engineering and universities participated in this workshop, reflecting their great interests. Attendants actively discussed about various coal utilization technologies and exchanged scientific and technical information on the state-of-art clean coal technologies under development. (author)

Workshop: Waiting for the top quark

International Nuclear Information System (INIS)

Anon.

1991-01-01

The world of elementary particle physics is eagerly waiting for the top quark, probably the final element of the 'periodic table' of elementary particle constituents. This table consists of two families of weakly interacting particles (leptons) - one series carrying electric charge; the other being electrically neutral - together with a family of quarks carrying electric charge 2/3 (up, charm, top) and a family of charge -1/3 quarks (down, strange, beauty). It was then not surprising that the 1990 Theory Workshop at the DESY Laboratory in Hamburg in October, devoted this time to 'top physics', attracted some 200 physicists, substantially more than previous workshops in the series

Workshop on Advanced Technologies for Planetary Instruments, part 1

International Nuclear Information System (INIS)

Appleby, J.F.

1993-01-01

This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. This volume contains papers presented at the Workshop on Advanced Technologies for Planetary Instruments on 28-30 Apr. 1993. This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. Over the past several years, SDIO has sponsored a significant technology development program aimed, in part, at the production of instruments with these characteristics. This workshop provided an opportunity for specialists from the planetary science and DOD communities to establish contacts, to explore common technical ground in an open forum, and more specifically, to discuss the applicability of SDIO's technology base to planetary science instruments

High performance thermal insulation systems (HiPTI). Vacuum insulated products (VIP). Proceedings of the international conference and workshop

Energy Technology Data Exchange (ETDEWEB)

Zimmermann, M.; Bertschinger, H.

2001-07-01

These are the proceedings of the International Conference and Workshop held at EMPA Duebendorf, Switzerland, in January 2001. The papers presented at the conference's first day included contributions on the role of high-performance insulation in energy efficiency - providing an overview of available technologies and reviewing physical aspects of heat transfer and the development of thermal insulation as well as the state of the art of glazing technologies such as high-performance and vacuum glazing. Also, vacuum-insulated products (VIP) with fumed silica, applications of VIP systems in technical building systems, nanogels, VIP packaging materials and technologies, measurement of physical properties, VIP for advanced retrofit solutions for buildings and existing and future applications for advanced low energy building are discussed. Finally, research and development concerning VIP for buildings are reported on. The workshops held on the second day covered a preliminary study on high-performance thermal insulation materials with gastight porosity, flexible pipes with high performance thermal insulation, evaluation of modern insulation systems by simulation methods as well as the development of vacuum insulation panels with a stainless steel envelope.

The fourth international energy agency international workshop on beryllium technology for fusion

International Nuclear Information System (INIS)

Scaffidi-Argentina, F.; Longhurst, G.R.

2000-01-01

The main objective of the workshop was to support the advancement of the international development of fusion power through communication and dissemination of information on progress made in beryllium technology. This has been accomplished through presentation of original research on issues of current interest to the fusion beryllium community. The workshop was divided into ten technical sessions that addressed the following general topics: production and characterization, health and safety, forming and joining, chemical compatibility, thermal-mechanical properties, pebble bed behavior, high-heat-flux performance, irradiation effects, plasma-tritium interaction, and molten beryllium-bearing salts

The fourth international energy agency international workshop on beryllium technology for fusion

Energy Technology Data Exchange (ETDEWEB)

Scaffidi-Argentina, F.; Longhurst, G.R.

2000-05-01

The main objective of the workshop was to support the advancement of the international development of fusion power through communication and dissemination of information on progress made in beryllium technology. This has been accomplished through presentation of original research on issues of current interest to the fusion beryllium community. The workshop was divided into ten technical sessions that addressed the following general topics: production and characterization, health and safety, forming and joining, chemical compatibility, thermal-mechanical properties, pebble bed behavior, high-heat-flux performance, irradiation effects, plasma-tritium interaction, and molten beryllium-bearing salts.

Japanese contributions to IAEA INTOR Workshop, Phase Two A, Part 3

International Nuclear Information System (INIS)

Mori, Shigeru; Tomabechi, Ken; Fujisawa, Noboru

1988-02-01

This report corresponds to Chapter I and II of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 3. The major objectives of the INTOR Workshop Part 3 are to evaluate innovative ideas which would significantly improve the tokamak concept, to study new-selected critical technical issues, that affect the feasibility or practicability of the INTOR concept, to assess scientific and technical data bases, and to conduct critical analyses of the existing INTOR-like designs with the aim of preparing a useful information base for future design work for ITER. To perform the innovations, critical issues, and data base, the following six groups are organized; (A) Impurity control, (B) Operational limits and confinement, (C) Current drive and heating, (D) Electromagnetics, (E) Configuration and maintenance, (F) Blanket and first wall. In addition to those groups, the two disciplinary groups are also organized to do the critical analyses of the existing INTOR-like designs; (G) Physics and (H) Engineering. (author)

Report from the 4th Workshop on Extremely Large Databases

Directory of Open Access Journals (Sweden)

Jacek Becla

2011-02-01

Full Text Available Academic and industrial users are increasingly facing the challenge of petabytes of data, but managing and analyzing such large data sets still remains a daunting task. The 4th Extremely Large Databases workshop was organized to examine the needs of communities under-represented at the past workshops facing these issues. Approaches to big data statistical analytics as well as emerging opportunities related to emerging hardware technologies were also debated. Writable extreme scale databases and the science benchmark were discussed. This paper is the final report of the discussions and activities at this workshop.

75 FR 57763 - ILP Effectiveness Evaluation 2010; Supplemental Notice of Multi-Stakeholder Technical Conference...

Science.gov (United States)

2010-09-22

... Effectiveness Evaluation 2010; Supplemental Notice of Multi- Stakeholder Technical Conference on the Integrated..., Teleconferences, Regional Workshops and Multi-Stakeholder Technical Conference on the Integrated Licensing Process... opportunity for industry, state and Federal agencies, tribes, and other stakeholders to express their views...

2003 RIA R AND D WORKSHOP.

Energy Technology Data Exchange (ETDEWEB)

OZAKI, S.ET AL.

2003-08-26

The 2003 RIA R&D Workshop was held on August 26-28, 2003 at the Four Points Sheraton Hotel in Bethesda, Maryland. This Workshop was chaired by Satoshi Ozaki of BNL and sponsored by the Nuclear Physics Division of DOE, with the help of Oak Ridge Institute for Science and Education (ORISE). The purpose of this workshop was to understand the present status of R&D efforts for RIA, to evaluate the needs for further R&D, and to identify opportunities for international collaborations. The workshop examined and documented the current pre-conceptual design for RIA, identifying areas where decisions on technical options remain. The status of the current RIA R&D program was documented, recognizing areas where efforts were needed in light of what had been learned. The ongoing and planned R&D activities for operating and planned rare-isotope facilities were presented, enabling the workshop to be a venue to develop coordinated R&D efforts of mutual benefit to U.S. and international efforts. The scientific program for the first day (August 26, 2003) consisted mostly of invited talks presented by major research groups involved in RIA and other RI beam facilities. The talks included those covering: Science of RIA and the RIA Facility Performance Requirements; The Reference RIA Facility Pre-CDR design that was used for the NSAC cost exercise (M. Harrison Sub-Panel) in January 2001; New or latest perspectives on the RIA design at ANL & MSU; and RI Beam facility plans and overview of the R&D activities at overseas laboratories. The second day (August 27, 2003) was devoted to contributed talks on continuing R&D, including that which had been supported by DOE RIA R&D funds. The third day (August 28, 2003) began with open panel discussions in the morning, including further input from participants. The panel members discussed the present status of the RIA planning and R&D needs in a closed session for the rest of the day, and then worked on report planning and writing. This Workshop

DIMEC - Final Report

DEFF Research Database (Denmark)

Conrad, Finn

1997-01-01

Final report of the research project DIMEC - Danish InfoMechatronic Control supported by the Danish Technical Research Council, STVF.......Final report of the research project DIMEC - Danish InfoMechatronic Control supported by the Danish Technical Research Council, STVF....

Proceedings of the 6th US/German Workshop on Salt Repository Research, Design, and Operation

Energy Technology Data Exchange (ETDEWEB)

Hansen, Francis D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steininger, Walter [Karlsruhe Inst. of Technology (KIT) (Germany); Bollingerfehr, Wilhelm [DBE Technology GmbH, Peine (Germany)

2016-01-11

The 6th US/German Workshop on Salt Repository Research, Design, and Operation was held in Dresden. Germany on September 7-9, 2015. Over seventy participants helped advance the technical basis for salt disposal of radioactive waste. The number of collaborative efforts continues to grow and to produce useful documentation, as well as to define the state of the art for research areas. These Proceedings are divided into Chapters, and a list of authors is included in the Acknowledgement Section. Also in this document are the Technical Agenda, List of Participants, Biographical Information, Abstracts, and Presentations. Proceedings of all workshops and other pertinent information are posted on websites hosted by Sandia National Laboratories and the Nuclear Energy Agency Salt Club. The US/German workshops provide continuity for long-term research, summarize and publish status of mature areas, and develop appropriate research by consensus in a workshop environment. As before, major areas and findings are highlighted, which constitute topical Chapters in these Proceedings. In total, the scientific breadth is substantial and while not all subject matter is elaborated into chapter format, all presentations and abstracts are published in this document. In the following Proceedings, six selected topics are developed in detail.

The December 2006 ATLAS Computing & Software Workshop

CERN Multimedia

Fred Luehring

The 29th ATLAS Computing & Software Workshop was held on December 11-15 at CERN. With the rapidly approaching onset of data taking, the workshop participants had an air of urgency about them. There was considerable discussion on hot topics such as physics validation of the software, data analysis, actual software production on the GRID, and the schedule of work for 2007 including the Final Dress Rehearsal (FDR). However don't be fooled, the workshop was not all work - there were also two social events which were greatly enjoyed by the attendees. The workshop welcomed Wouter Verkerke as the new Physics Validation Coordinator (replacing Davide Costanzo). Most recent validation work has centered on the 12.0.X release series that will be used for the Computing System Commissioning (CSC) exercise. The validation is now a big job because it needs to be done over a variety of conditions (magnetic field on/off, aligned/misaligned geometry) for every candidate release. Luckily there have been a large number of pe...

4. Workshop - Measurement techniques of stationary and transient multiphase flow

Energy Technology Data Exchange (ETDEWEB)

Prasser, H.M. (ed.)

2001-05-01

In November 2000, the 4th Workshop on Measurement Techniques for Stationary and Transient Multiphase Flows took place in Rossendorf. Three previous workshops of this series were national meetings; this time participants from different countries took part. The programme comprised 14 oral presentations, 9 of which are included in these proceedings in full length. A special highlight of the meeting was the main lecture ''Ultrasonic doppler method for bubbly flow measurement'' of Professor Masanori Aritomi, Dr. Hiroshige Kikura and Dr. Yumiko Suzuki. The workshop again dealt with high-resolution phase distribution and phase velocity measurement techniques based on electrical conductivity, ultrasound, laser light and high-speed cinematography. A number of presentations were dedicated to the application of wire-mesh sensors developed by FZR for different applications used by the Technical Universities of Delft and Munich and the Tokyo Institute of Technology. (orig.)

Arms control in space: workshop proceedings, Washington, DC, January 30-31, 1984

International Nuclear Information System (INIS)

1984-05-01

In late 1982 and early 1983, the Subcommittee on Arms Control, Oceans, International Operations, and Environment of the Senate Committee on Foreign Relations held hearings on space weapons and arms control. To explore these issues further in a discussion format not easily achieved in hearings, Sen. Larry Pressler, Chairman of the Subcommittee, asked OTA to conduct a workshop focusing on antisatellite (ASAT) weapons as one aspect of space arms control. The workshop held in Washington, DC on January 30 and 31, 1984, provided an opportunity for technical, diplomatic, military, and policy-analysis experts to interact, think out loud, and build each other's ideas. The workshop was organized into six sessions, although issues involving anti-satellite weapons and arms control are not easily compartmentalized into distinct subject areas. Each session was introduced by a 10- or 15-minute informal oral presentation which set the stage for further discussion. This workshop proceedings volume is organized along the same divisions as the sessions, with some rearrangement

Proceedings of IEEE Workshop on Machine Learning for Signal Processing XIV

DEFF Research Database (Denmark)

Larsen, Jan

of machine learning. We would like to express our appreciation and gratitude to UFMA, EMAP, ELETROBRÁS, ELETRONORTE, ALUMAR and BASA, who contributed to the workshop by providing technical and financial support in various forms. Our warmest, special thanks go to our plenary speakers: Prof. Petar M. Djuric...

A First Implementation of a Design Thinking Workshop During a Mobile App Development Project Course

OpenAIRE

Pham, Yen Dieu; Fucci, Davide; Maalej, Walid

2018-01-01

Due to their characteristics, millennials prefer learning-by-doing and social learning, such as project-based learning. However, software development projects require not only technical skills but also creativity; Design Thinking can serve such purpose. We conducted a workshop following the Design Thinking approach of the d.school, to help students generating ideas for a mobile app development project course. On top of the details for implementing the workshop, we report our observations, les...

PROCEEDINGS OF THE WORKSHOP ON LHC INTERACTION REGION CORRECTION SYSTEMS

International Nuclear Information System (INIS)

FISCHER, W.; WEI, J.

1999-01-01

The Workshop on LHC Interaction Region Correction Systems was held at Brookhaven National Laboratory, Upton, New York, on 6 and 7 May 1999. It was attended by 25 participants from 5 institutions. The performance of the Large Hadron Collider (LHC) at collision energy is limited by the field quality of the interaction region quadrupoles and dipoles. In three sessions the workshop addressed the field quality of the these magnets, reviewed the principles and efficiency of global and local correction schemes and finalized a corrector layout. The session on Field Quality Issues, chaired by J. Strait (FNAL), discussed the progress made by KEK and FNAL in achieving the best possible field quality in the interaction region quadrupoles. Results of simulation studies were presented that assess the effects of magnetic field errors with simulation studies. Attention was given to the uncertainties in predicting and measuring field errors. The session on Global Correction, chaired by J.-P. Koutchouk (CERN), considered methods of reducing the nonlinear detuning or resonance driving terms in the accelerator one-turn map by either sorting or correcting. The session also discussed the crossing angle dependence of the dynamic aperture and operational experience from LEP. The session on Local Correction, chaired by T. Taylor (CERN), discussed the location, strength and effectiveness of multipole correctors in the interaction regions for both proton and heavy ion operation. Discussions were based on technical feasibility considerations and dynamic aperture requirements. The work on linear corrections in the interaction regions was reviewed

'Workshops in healing' for senior medical students: a 5-year overview and appraisal.

Science.gov (United States)

Kearsley, John H; Lobb, Elizabeth A

2014-12-01

We report upon the design, content and feedback from an interactive, experiential series of Workshops in Healing for senior medical students. Fifty-six final year medical students enrolled in 2×3 h workshops designed around the core themes of 'physician know thyself' (Workshop 1) and 'confronting suffering' (Workshop 2). Of the 56 students who initially enrolled, 48 students completed both workshops and provided a written open-ended reflection of their learning experience. The study, undertaken over a consecutive 5-year period (2008-2012), employed an emergent, qualitative design using thematic analysis of the reflective comments. We found that the design and content of both workshops promoted transformative learning for these final year medical students. Students identified the following benefits: (1) the opportunity to reaffirm their commitment to their chosen career path; (2) the value of listening to other students share their stories; (3) the importance of the timing of the workshops to occur after exams; (4) the use of various mediums such as art, poetry, music and contemporary/classic literature to present concepts of suffering and healing; and (5) the creation of a safe and confidential space. Students reported that these innovative workshops gave them a renewed sense of drive and enthusiasm for their chosen career. They highlighted the importance of addressing an aspect of medicine (healing) not covered in the traditional medical curriculum. Workshops in Healing helped them to rediscover a deeper meaning to medicine and their roles as future healthcare professionals. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Workshop on a project for a FZR-beam line at ESRF

International Nuclear Information System (INIS)

Matz, W.

1993-10-01

The Research Center Rossendorf (FZR) investigates the possibilities to install its own beam line as a Cooperate Research Group-project (CRG) at the European Synchrotron Radiation Facility (ESRF) in Grenoble. The main interests for the FZR to use high brillant synchrotron radiation are in the Institute of Radiochemistry and the Institute of Ion Beam Physics and Materials Research. This workshop was organized by these two institutes together with the FZR Study group Synchrotron. The purpose of the workshop was to achieve a better understanding for the technical needs of the projected beam line for the planned research projects. Experts with experience in beam line design met with the Rossendorf groups to discuss the best layout for such a beam line. The summary of this workshop and the copies of transparencies of the lectures that were given are published in this booklet. (orig.)

Workshop on Software Development Tools for Petascale Computing

Energy Technology Data Exchange (ETDEWEB)

Vetter, Jeffrey [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Georgia Inst. of Technology, Atlanta, GA (United States)

2007-08-01

Petascale computing systems will soon be available to the DOE science community. Recent studies in the productivity of HPC platforms point to better software environments as a key enabler to science on these systems. To prepare for the deployment and productive use of these petascale platforms, the DOE science and general HPC community must have the software development tools, such as performance analyzers and debuggers that meet application requirements for scalability, functionality, reliability, and ease of use. In this report, we identify and prioritize the research opportunities in the area of software development tools for high performance computing. To facilitate this effort, DOE hosted a group of 55 leading international experts in this area at the Software Development Tools for PetaScale Computing (SDTPC) Workshop, which was held in Washington, D.C. on August 1 and 2, 2007. Software development tools serve as an important interface between the application teams and the target HPC architectures. Broadly speaking, these roles can be decomposed into three categories: performance tools, correctness tools, and development environments. Accordingly, this SDTPC report has four technical thrusts: performance tools, correctness tools, development environment infrastructures, and scalable tool infrastructures. The last thrust primarily targets tool developers per se, rather than end users. Finally, this report identifies non-technical strategic challenges that impact most tool development. The organizing committee emphasizes that many critical areas are outside the scope of this charter; these important areas include system software, compilers, and I/O.

Workshop on decommissioning; Seminarium om avveckling

Energy Technology Data Exchange (ETDEWEB)

Broden, K. (ed.)

2005-12-15

A Nordic workshop on decommissioning of nuclear facilities was held at Risoe in Denmark September 13-15, 2005. The workshop was arranged by NKS in cooperation with the company Danish Decommissioning, DD, responsible for decommissioning of nuclear facilities at Risoe. Oral presentations were made within the following areas: International and national recommendations and requirements concerning decommissioning of nuclear facilities Authority experiences of decommissioning cases Decommissioning of nuclear facilities in Denmark Decommissioning of nuclear facilities in Sweden Plans for decommissioning of nuclear facilities in Norway Plans for decommissioning of nuclear facilities in Finland Decommissioning of nuclear facilities in German and the UK Decommissioning of nuclear facilities in the former Soviet Union Results from research and development A list with proposals for future work within NKS has been prepared based on results from group-work and discussions. The list contains strategic, economical and political issues, technical issues and issues regarding competence and communication. (au)

Technical support document for land application of sewage sludge. Volume 1. Final report

International Nuclear Information System (INIS)

Jones, A.; Beyer, L.; Rookwood, M.; Pacenka, J.; Bergin, J.

1992-11-01

The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the land application of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in land applied sewage sludge. The management practices associated with land application are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through land application are discussed

PREFACE: PASREG 2003: International Workshop on Processing and Applications of Superconducting (RE)BCO Large Grain Materials

Science.gov (United States)

Murakami, Masato; Cardwell, David; Salama, Kamel; Krabbes, Gernot; Habisreuther, Tobias; Gawalek, Wolfgang

2005-02-01

Superconducting melt-textured bulk (RE)BCO large grain materials are one of the most promising materials for power applications of high temperature superconductivity at the liquid nitrogen temperature range. Industrial applications are expected in high-speed low-loss magnetic bearings for flywheel energy storage devices, high-dynamic high-torque electric reluctance motors, and MAGLEV transportation systems. The material has high magnetic field trapping capability and therefore a new class of high-field superconducting permanent magnets will soon appear. However, there is still the need to improve the magnetic and mechanical material properties, as well as to increase the single domain size. This special issue contains papers concerning these topics presented at the International Workshop on the Processing and Applications of Superconducting (RE)BCO Large Grain Materials. The workshop was held on the 30 June-2 July 2003 in Jena, Germany, and was organized by the Institut fuer Physikalische Hochtechnologie, Jena. It was the fourth in the series of PASREG workshops after Cambridge, UK (1997), Morioka, Japan (1999), and Seattle, USA (2001). Sixty two contributions were presented at the workshop, 38 oral presentations and 24 poster presentations. This special issue contains 42 papers. The editors are grateful for the support of many colleagues who reviewed the manuscripts to guarantee their high technical quality. The editors also wish to thank Doris Litzkendorf and Tobias Habisreuther from Institut fuer Physikalische Hochtechnologie, Jena, for their assistance with the organization and handling of the manuscripts. Many thanks to the workshop co-chairman Gernot Krabbes from Leibniz-Institut fuer Festkoerper und Werkstoffforschung, Dresden, for hosting the workshop participants in Dresden. Finally, all attendees wish to acknowledge the efforts of Wolfgang Gawalek, Tobias Habisreuther, Doris Litzkendorf and the Team of Department Magnetics from the Institut fuer

Development of a harmonized risk mitigation toolbox dedicated to environmental risks of pesticides in farmland in Europe: outcome of the MAgPIE workshop

Directory of Open Access Journals (Sweden)

Alix, A.

2015-11-01

Full Text Available Risk mitigation measures are a key component in designing conditions of use of pesticides in crop protection. A 2-step workshop was organized under the auspices of SETAC and the European Commission and gathered risk assessors and risk managers of 21 European countries, industry, academia and agronomical advisors/extension services, in order to provide European regulatory authorities with a toolbox of risk mitigation measures designed to reduce environmental risks of pesticides used in agriculture, and thus contribute to a better harmonization within Europe in the area. The workshop gathered an inventory of the risk mitigation tools for pesticides being implemented or in development in European countries. The inventory was discussed in order to identify the most promising tools for a harmonized toolbox in the European area. The discussions concerned the level of confidence in the technical data on which the tools identified rely, possible regulatory hurdles, expectations as regards the implementation of these tools by farmers and links with risk assessment. Finally, this workshop was a first step towards a network gathering all stakeholders, i.e. experts from national authorities, research sector, industry and farmers, to share information and further develop this toolbox. This paper presents an outline of the content of the toolbox with an emphasis on spray drift reducing techniques, in line with the discussions ongoing in the SPISE workshop.

Culturally relevant science: An approach to math science education for hispanics. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Montellano, B.O. de

1996-11-14

This progress report summarizes results of a teacher workshop. A letter sent to 17 teachers who had participated in the workshop requested a report of any activities undertaken and copies of lesson plans and materials developed. Only nine responses were received, and not all of them demonstrated a satisfactory level of activity. Teachers who submitted materials showing the most promise were invited to participate in the Summer Writing Workshop. A partial first draft of a companion volume for the teacher`s manual was written which provides a rationale for culturally relevant science and presents the cultural and scientific background needed. The outline of the book is presented in Appendix 1. Appendix 2 is a sample chapter from the book.

Workshop on the role of natural analogs in geologic disposal of high-level nuclear waste

International Nuclear Information System (INIS)

Murphy, W.M.; Kovach, L.A.

1995-01-01

A workshop on the Role of Natural Analogs in Geologic Disposal of High-Level Nuclear Waste (HLW) was held in San Antonio, Texas, on July 22-25, 1991. It was sponsored by the US Nuclear Regulatory Commission (NRC) and the Center for Nuclear Waste Regulatory Analyses (CNWRA). Invitations to the workshop were extended to a large number of individuals with a variety of technical and professional interests related to geologic disposal of nuclear waste and natural analog studies. The objective of the workshop was to examine the role of natural analog studies in performance assessment, site characterization, and prioritization of research related to geologic disposal of HLW

EMuRgency: Socio-technical innovations to save lives

NARCIS (Netherlands)

Kalz, Marco

2013-01-01

Kalz, M. (2013, 18 September). EMuRgency: Socio-technical innovations to save lives. Presentation provided during the workshop on 21st century learning in the health and emergency sectors in conjunction with the 8th European Conference on Technology-Enhanced Learning (ECTEL 2013). Paphos, Cyprus.

75 FR 66752 - ILP Effectiveness Evaluation 2010; Additional Notice of Multi-Stakeholder Technical Conference on...

Science.gov (United States)

2010-10-29

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD10-7-000] ILP Effectiveness Evaluation 2010; Additional Notice of Multi- Stakeholder Technical Conference on the Integrated..., Teleconferences, Regional Workshops And Multi-Stakeholder Technical Conference On The Integrated Licensing Process...

Proceedings of the NOAMI workshop : a workshop to explore perspectives on risk assessment for orphaned and abandoned mines

International Nuclear Information System (INIS)

2009-03-01

This workshop hosted by the National Orphaned/Abandoned Mines Initiative (NOAMI) discussed risk assessment strategies and perspectives for orphaned and abandoned mines in Canada. Different perspectives related to the risk assessment process were considered by participants from local, provincial, federal, and territorial agencies as well as non-governmental, academic, and mining industry organizations. Strategies for effectively communicating with local communities were discussed. New methods of assessing risk related to bioavailability and bioaccessibility were reviewed along with approaches to risk assessment and risk management in relation to the Environmental Management Act. Case studies of risk assessment and remediation projects were presented. The workshop presentations were divided into the following 6 sessions: (1) keynote, (2) opening panel, (3) human health panel, (4) ecological panel, (5) geotechnical-safety risk assessment panel, and (6) case studies and perspectives. The workshop featured 22 presentations, of which 2 have been catalogued separately for inclusion in this database. A report on detailed ecological risk assessment (DERA) in British Columbia prepared by the Science Advisory Board for Contaminated Sites in British Columbia (BC) was included, as well as a final report that summarized presentations given at the workshop. refs., tabs., figs

Photovoltaic-wind hybrid systems for remote power supply. Workshop. [Selected Papers

Energy Technology Data Exchange (ETDEWEB)

Huacuz, J. M.; Urrutia, M. [eds.] [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

This document include the papers of the RIER Workshop that was hold in Cancun, Mexico, on 21-25 April 1997. This Workshop was organized by the Non-Conventional Energy Unit of the Electrical Research Institute of Mexico (IIE), with the financial contributions from the Mexican National Council for Science and Technology (CONACYT) and the Iberoamerican Network for Rural Electrification with Renewable Energy (RIER) of the Program Science and Technology for Development (CYTED). The purpose of this Workshop was to present works developed on the technology of Photovoltaic-Wind Hybrid Systems, and to discuss both technical and non-technical factors that could foster or inhibit the widespread application this technology [Espanol] Este documento incluye los articulos tecnicos del taller de trabajo RIER, realizado en Cancun, Mexico, del 21 al 25 de abril de 1997. Este taller de trabajo fue organizado por el Instituto de Investigaciones Electricas (IIE), con la contribucion financiera del Consejo Nacional de Ciencia y Tecnologia (CONACYT) y de la Red de Trabajo Iberoamericana para la Electrificacion Rural con Energia Renovable (RIER) del programa Ciencia y Tecnologia para el Desarrollo (CYTED). El proposito de este taller fue presentar trabajos desarrollados sobre la tecnologia de sistemas hibridos fotovoltaicos y de viento, y discutir los factores tecnicos y no tecnicos que pudieran fomentar o detener la amplia aplicacion de esta tecnologia

Photovoltaic-wind hybrid systems for remote power supply. Workshop. [Selected Papers

Energy Technology Data Exchange (ETDEWEB)

Huacuz, J M; Urrutia, M [eds.; Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

This document include the papers of the RIER Workshop that was hold in Cancun, Mexico, on 21-25 April 1997. This Workshop was organized by the Non-Conventional Energy Unit of the Electrical Research Institute of Mexico (IIE), with the financial contributions from the Mexican National Council for Science and Technology (CONACYT) and the Iberoamerican Network for Rural Electrification with Renewable Energy (RIER) of the Program Science and Technology for Development (CYTED). The purpose of this Workshop was to present works developed on the technology of Photovoltaic-Wind Hybrid Systems, and to discuss both technical and non-technical factors that could foster or inhibit the widespread application this technology [Espanol] Este documento incluye los articulos tecnicos del taller de trabajo RIER, realizado en Cancun, Mexico, del 21 al 25 de abril de 1997. Este taller de trabajo fue organizado por el Instituto de Investigaciones Electricas (IIE), con la contribucion financiera del Consejo Nacional de Ciencia y Tecnologia (CONACYT) y de la Red de Trabajo Iberoamericana para la Electrificacion Rural con Energia Renovable (RIER) del programa Ciencia y Tecnologia para el Desarrollo (CYTED). El proposito de este taller fue presentar trabajos desarrollados sobre la tecnologia de sistemas hibridos fotovoltaicos y de viento, y discutir los factores tecnicos y no tecnicos que pudieran fomentar o detener la amplia aplicacion de esta tecnologia

18th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Workshop Proceedings, 3-6 August 2008, Vail, Colorado

Energy Technology Data Exchange (ETDEWEB)

Sopori, B. L.

2008-09-01

The National Center for Photovoltaics sponsored the 18th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 3-6, 2008. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The theme of this year's meeting was 'New Directions for Rapidly Growing Silicon Technologies.'

Report from the 2nd Workshop on Extremely Large Databases

Directory of Open Access Journals (Sweden)

Jacek Becla

2009-03-01

Full Text Available The complexity and sophistication of large scale analytics in science and industry have advanced dramatically in recent years. Analysts are struggling to use complex techniques such as time series analysis and classification algorithms because their familiar, powerful tools are not scalable and cannot effectively use scalable database systems. The 2nd Extremely Large Databases (XLDB workshop was organized to understand these issues, examine their implications, and brainstorm possible solutions. The design of a new open source science database, SciDB that emerged from the first workshop in this series was also debated. This paper is the final report of the discussions and activities at this workshop.

Final report : scientific review and workshop on selenium at Alberta mountain coal mines held in Hinton, Alberta, Canada on June 28 and 29, 2005 by the Selenium Science Panel

International Nuclear Information System (INIS)

Klaverkamp, J.F.; Adams, W.J.; Hodson, P.V.; Ohlendorf, H.M.; Skorupa, J.P.

2005-01-01

The effects and approaches to the management of selenium in Alberta mountain coal mines were reviewed by a Selenium Science Panel to determine if any adverse ecological impacts have occurred or will occur related to discharges of selenium associated with coal mining. The Science Panel reviewed work that has been completed in Alberta as well as technical reports on surface water quality, the aquatic food web, and monitoring programs on fish and terrestrial wildlife. It then assessed whether studies conducted to date have fulfilled recommendations made at a previous workshop held in September 2000 regarding the management of selenium. The Science Panel noted considerable progress in studies proposed in a work plan developed soon after the 2000 workshop. Building upon this foundation of knowledge and other information contained in the scientific literature, the Science Panel noted some knowledge gaps and priority issues. In order to address these gaps and issues, the Panel's recommendations were presented in this report along with supporting rationale.12 refs., 5 appendices

Report of the transition crossing mini-workshop

International Nuclear Information System (INIS)

Martin, P.; Chou, W.

1996-07-01

This was the first in a series of mini-workshops on high intensity, high brightness hadron beams. Twenty five people from CERN, KEK, BNL, Fermilab and University of Houston attended the workshop. The first day was a plenary session with nine presentations. On the second day, three working groups (WG) were formed: WG-I was on theory, simulation and measurements, led by J.P. Riunaud (CERN) and P.L. Colestock (Fermilab); WG-II was on γ t -jump systems, led by T. Roser (BNL) and W. Chou (Fermilab); WG-III was on new schemes, led by Y. Mori (KEK) and J. Griffin (Fermilab). Each group gave a presentation at the final plenary session. The summaries from the three working groups are included in this report. During the workshop, P. Martin gave a guided tour to the Main Injector tunnel, which is under construction at Fermilab

77 FR 31371 - Public Workshop: Privacy Compliance Workshop

Science.gov (United States)

2012-05-25

... presentations, including the privacy compliance fundamentals, privacy and data security, and the privacy... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Privacy Compliance... Homeland Security Privacy Office will host a public workshop, ``Privacy Compliance Workshop.'' DATES: The...

Advanced Gas Storage Concepts: Technologies for the Future

Energy Technology Data Exchange (ETDEWEB)

Freeway, Katy (PB-KBB Inc.); Rogers, R.E. (Mississippi State University); DeVries, Kerry L.; Nieland, Joel D.; Ratigan, Joe L.; Mellegard, Kirby D. (RESPEC)

2000-02-01

This full text product includes: 1) A final technical report titled Advanced Underground Gas Storage Concepts, Refrigerated-Mined Cavern Storage and presentations from two technology transfer workshops held in 1998 in Houston, Texas, and Pittsburgh, Pennsylvania (both on the topic of Chilled Gas Storage in Mined Caverns); 2) A final technical report titled Natural Gas Hydrates Storage Project, Final Report 1 October 1997 - 31 May 1999; 3) A final technical report titled Natural Gas Hydrates Storage Project Phase II: Conceptual Design and Economic Study, Final Report 9 June - 10 October 1999; 4) A final technical report titled Commerical Potential of Natural Gas Storage in Lined Rock Caverns (LRC) and presentations from a DOE-sponsored workshop on Alternative Gas Storage Technologies, held Feb 17, 2000 in Pittsburgh, PA; and 5) Phase I and Phase II topical reports titled Feasibility Study for Lowering the Minimum Gas Pressure in Solution-Mined Caverns Based on Geomechanical Analyses of Creep-Induced Damage and Healing.

10th Workshop on Crystalline Silicon Solar Cell Materials and Processes: Extended Abstracts and Papers from the Workshop, Copper Mountain Resort; August 14-16, 2000

Energy Technology Data Exchange (ETDEWEB)

Sopori, B.L.; Gee, J.; Kalejs, J.; Saitoh, R.; Stavola, M.; Swanson, D.; Tan, T.; Weber, E.; Werner, J.

2000-08-11

The 10th Workshop provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and non-photovoltaic fields. Discussions included the various aspects of impurities and defects in silicon-their properties, the dynamics during device processing, and their application for developing low-cost processes for manufacturing high-efficiency silicon solar cells. Sessions and panel discussions also reviewed thin-film crystalline-silicon PV, advanced cell structures, new processes and process characterization techniques, and future manufacturing requirements to meet the ambitious expansion goals described in the recently released US PV Industry Roadmap. The Workshop also provided an excellent opportunity for researchers in private industry and at universities to recognize a mutual need for future collaborative research. The three-day workshop consisted of presentations by invited speakers, followed by discussion sessions. In addition, there was two poster sessions presenting the latest research and development results. The subjects discussed included: solar cell processing, light-induced degradation, gettering and passivation, crystalline silicon growth, thin-film silicon solar cells, and impurities and defects. Two special sessions featured at this workshop: advanced metallization and interconnections, and characterization methods.

Proceedings of the international workshop on engineering design of next step reversed field pinch devices

International Nuclear Information System (INIS)

Thomson, D.B.

1987-11-01

These Proceedings contain the formal contributed papers, the workshop papers and workshop summaries presented at the International Workshop on Engineering Design of Next Step RFP Devices held at Los Alamos, July 13-17, 1987. Contributed papers were presented at formal sessions on the topics: (1) physics overview (3 papers); (2) general overview (3 papers); (3) front-end (9 papers); (4) computer control and data acquisition (1 paper); (5) magnetics (5 papers); and (6) electrical design (9 papers). Informal topical workshop sessions were held on the topics: (1) RFP physics (9 papers); (2) front-end (7 papers); (3) magnetics (3 papers); and (4) electrical design (1 paper). This volume contains the summaries written by the Chairmen of each of the informal topical workshop sessions. The papers in these Proceedings represent a significant review of the status of the technical base for the engineering design of the next step RFP devices being developed in the US, Europe, and Japan, as of this date

Proceedings of the international workshop on engineering design of next step reversed field pinch devices

Energy Technology Data Exchange (ETDEWEB)

Thomson, D.B. (comp.)

1987-11-01

These Proceedings contain the formal contributed papers, the workshop papers and workshop summaries presented at the International Workshop on Engineering Design of Next Step RFP Devices held at Los Alamos, July 13-17, 1987. Contributed papers were presented at formal sessions on the topics: (1) physics overview (3 papers); (2) general overview (3 papers); (3) front-end (9 papers); (4) computer control and data acquisition (1 paper); (5) magnetics (5 papers); and (6) electrical design (9 papers). Informal topical workshop sessions were held on the topics: (1) RFP physics (9 papers); (2) front-end (7 papers); (3) magnetics (3 papers); and (4) electrical design (1 paper). This volume contains the summaries written by the Chairmen of each of the informal topical workshop sessions. The papers in these Proceedings represent a significant review of the status of the technical base for the engineering design of the next step RFP devices being developed in the US, Europe, and Japan, as of this date.

Fiscal 1998 engineer interexchange project (coal mine technology field). International interexchange project (Workshop in Japan); 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya). Kokusai koryu jigyo (kokunai workshop)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This report summarizes the workshop and technical tour held in Japan for technical interexchange of domestic and overseas engineers. From the information obtained, the higher productivity of coal mines is dependent on selective mining under blessed geological conditions, however, basically establishment of an advanced management technique for inexpensive stable operation. Both preliminary collection of geological information and introduction of advanced facilities even under unstable conditions are necessary. The balance and optimization of the whole system, and an excellent human nature for operation are also essential. Use of roof bolt supports is diffusing as improvement technology of excavation speed and roof control technology over the world. However, for introduction of new technologies, collection of test results and various kinds of training are necessary. Methane gas in coal seams as the main theme of the Hokkaido workshop is a precious unused natural resource, and important for prevention of global warming and coal mine protection measures. Its use is dependent on development of gas drainage technology. (NEDO)

LDEF Materials Workshop 1991, part 1

International Nuclear Information System (INIS)

Stein, B.A.; Young, P.R.

1992-09-01

The workshop comprised a series of technical sessions on materials themes, followed by theme panel meetings. Themes included materials, environmental parameters, and data bases; contamination; thermal control and protective coatings and surface treatments; polymers and films; polymer matrix composites; metals, ceramics, and optical materials; lubricants adhesives, seals, fasteners, solar cells, and batteries. This report contains most of the papers presented at the technical sessions. It also contains theme panel reports and visual aids. This document continues the LDEF Space Environmental Effects on Materials Special Investigation Group (MSIG) pursuit of its charter to investigate the effects of LEO exposure on materials which where not originally planned to be test specimens and to integrate this information with data generated by principal investigators into an LDEF materials data base. Separate abstract have been prepared for papers in this report

Workshops som forskningsmetode

OpenAIRE

Ørngreen, Rikke; Levinsen, Karin Tweddell

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learnin...

Final Technical Progress Report: Development of Low-Cost Suspension Heliostat; December 7, 2011 - December 6, 2012

Energy Technology Data Exchange (ETDEWEB)

Bender, W.

2013-01-01

Final technical progress report of SunShot Incubator Solaflect Energy. The project succeeded in demonstrating that the Solaflect Suspension Heliostat design is viable for large-scale CSP installations. Canting accuracy is acceptable and is continually improving as Solaflect improves its understanding of this design. Cost reduction initiatives were successful, and there are still many opportunities for further development and further cost reduction.

WORKSHOP: Crystalline beams

International Nuclear Information System (INIS)

Anon.

1989-01-01

Following pioneer work by specialists at the Soviet Novosibirsk Laboratory some ten years ago, interest developed in the possibility of 'freezing' ion beams in storage rings by pushing cooling (to smooth out beam behaviour) to its limits, the final goal being to lock the ions into a neat crystal pattern. After advances by groups working on laser cooled ions in traps, and with several cooling rings now in operation, a workshop on crystalline ion beams was organized recently by the GSI (Darmstadt) Laboratory and held at Wertheim in Germany

2003 RIA R AND D WORKSHOP

International Nuclear Information System (INIS)

OZAKI, S.

2003-01-01

The 2003 RIA R and D Workshop was held on August 26-28, 2003 at the Four Points Sheraton Hotel in Bethesda, Maryland. This Workshop was chaired by Satoshi Ozaki of BNL and sponsored by the Nuclear Physics Division of DOE, with the help of Oak Ridge Institute for Science and Education (ORISE). The purpose of this workshop was to understand the present status of R and D efforts for RIA, to evaluate the needs for further R and D, and to identify opportunities for international collaborations. The workshop examined and documented the current pre-conceptual design for RIA, identifying areas where decisions on technical options remain. The status of the current RIA R and D program was documented, recognizing areas where efforts were needed in light of what had been learned. The ongoing and planned R and D activities for operating and planned rare-isotope facilities were presented, enabling the workshop to be a venue to develop coordinated R and D efforts of mutual benefit to U.S. and international efforts. The scientific program for the first day (August 26, 2003) consisted mostly of invited talks presented by major research groups involved in RIA and other RI beam facilities. The talks included those covering: Science of RIA and the RIA Facility Performance Requirements; The Reference RIA Facility Pre-CDR design that was used for the NSAC cost exercise (M. Harrison Sub-Panel) in January 2001; New or latest perspectives on the RIA design at ANL and MSU; and RI Beam facility plans and overview of the R and D activities at overseas laboratories. The second day (August 27, 2003) was devoted to contributed talks on continuing R and D, including that which had been supported by DOE RIA R and D funds. The third day (August 28, 2003) began with open panel discussions in the morning, including further input from participants. The panel members discussed the present status of the RIA planning and R and D needs in a closed session for the rest of the day, and then worked on report

Enhancing Effective Stakeholder Participation in Local Groundwater Sustainability Planning through Technical Assistance in California

Science.gov (United States)

Weintraub, C.; Christian-Smith, J.; Dobbin, K.; Cullen, K.

2017-12-01

This presentation will share content from UCS's new publication, Getting Involved in Groundwater; A Guide to Effective Engagement in California's Groundwater Sustainability Plans, as well as lessons learned from collaborating with community organizations to provide technical assistance to Groundwater Sustainability Agency (GSA) board members and stakeholders in the San Joaquin Valley on Groundwater Sustainability Plan (GSP) development. California's Sustainable Groundwater Management Act (SGMA) mandates extensive stakeholder engagement, presenting an opportunity for unincorporated, low-income communities that have historically been affected by but not included in water decisions. However, implementation requires a concerted, thoughtful effort. Through technical assistance and strategic outreach, the Union of Concerned Scientists (UCS) is working to ensure stakeholder engagement in GSP development is robust, diverse, and supported by the best science available. UCS created the GSP stakeholder engagement guide to equip GSA members, scientists and interested community members to meaningfully engage in the GSP development process. The guide serves as a technical primer on SGMA's GSP process and as a resource for understanding groundwater management in California. The guide is just one component of a larger effort to overcome barriers to effective engagement in sustainable groundwater management, especially those presented by technical information. In April, UCS co-hosted a technical assistance workshop for GSA and advisory committee members in Visalia, CA with the Community Water Center (CWC), a local environmental justice non-profit. The workshop was well received and UCS and the CWC were invited to host a second workshop in June. To deepen this engagement and provide one-on-one technical assistance, UCS developed a program to match relevant water experts in the UCS Science Network with GSA members or involved community members in need of specific technical support

Seventeenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

1992-01-31

PREFACE The Seventeenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 29-31, 1992. There were one hundred sixteen registered participants which equaled the attendance last year. Participants were from seven foreign countries: Italy, Japan, United Kingdom, France, Belgium, Mexico and New Zealand. Performance of many geothermal fields outside the United States was described in the papers. The Workshop Banquet Speaker was Dr. Raffaele Cataldi. Dr. Cataldi gave a talk on the highlights of his geothermal career. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Cataldi. Dr. Frank Miller presented the award at the banquet. Thirty-eight papers were presented at the Workshop with two papers submitted for publication only. Dr. Roland Horne opened the meeting and the key note speaker was J.E. ''Ted'' Mock who discussed the DOE Geothermal R. & D. Program. The talk focused on aiding long-term, cost effective private resource development. Technical papers were organized in twelve sessions concerning: geochemistry, hot dry rock, injection, geysers, modeling, and reservoir mechanics. Session chairmen were major contributors to the program and we thank: Sabodh Garg., Jim Lovekin, Jim Combs, Ben Barker, Marcel Lippmann, Glenn Horton, Steve Enedy, and John Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Francois Groff who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook -vii

Proceedings of the national workshop on radiation safety and the Nigerian legal system

International Nuclear Information System (INIS)

Mallam, S.P.; Elegba, S.B.; Maiyaki, M.C.

1996-01-01

This volume is the proceedings of the National Workshop on Radiation Safety and the Nigeria Legal System held at The Centre for Energy Research and Training, Ahmadu Bello University Zaria from 7 - 9 June, 1995. The Sole aim of the workshop was to encourage the Federal Government of Nigeria to promulgate the Decree on Nuclear Safety and Radiation Protection. The focal point of the workshop was the presentation of the various peaceful applications of nuclear energy in the national economy, albeit without any legal backing. Thus there were presentations from legal practitioners. Particular consideration was given to contribution from the Agency which dealt in great details with both the legal and infra structural requirements for nuclear safety and radiation protection. Presentation by the ministry of Foreign Affairs, Federal Ministry of Health and the Federal Environmental Protection Agency underscored the multi-sectoral and multi-dimensional nature of the concern. This volume contains the full text of 11 technical papers and also speeches by invited dignitaries presented at the workshop. The papers were fully discussed during the workshop. The organizing committee wishes to thank all authors for their presentation and cooperation in submitting manuscript promptly and the participants for there excellent contribution during the workshop

Workshop on CEBAF at higher energies

International Nuclear Information System (INIS)

Isgur, N.; Stoler, P.

1994-04-01

Since the current parameters of CEBAF were defined almost a decade ago, there has been a remarkably fruitful evolution of our picture of the behavior of strongly interacting matter that apparently could be addressed by CEBAF at higher energies. Favorable technical developments coupled with foresight in initial laboratory planning have now made it feasible to consider approximately doubling CEBAF's current design energy of 4 GeV to approach 10 GeV at rather modest cost. The purpose of the workshop, sponsored by the CEBAF User Group, was to begin to develop the next phase of CEBAF's program by giving the entire community the opportunity to participate in defining the future of our field, and in particular the physics accessible with an upgraded CEBAF energy. It is intended that this report mark the first step toward an ultimate goal of defining a physics program that will form the basis for an upgrade of CEBAF. The report begins with a brief overview of the workshop's conclusions. Its body consists of sections corresponding to the workshop's Working Groups on Hadron Spectroscopy and Production, High Q 2 Form Factors and Exclusive Reactions, Inclusive and Semi-Inclusive Processes, and Hadrons in the Nuclear Medium. Each section begins with the working group summaries and is followed by associated plenary talks summarizing the outstanding physics issues addressable by an upgrade, which are in turn followed by individual contributions presenting specific physics programs. An appendix describes capabilities of CEBAF's current experimental equipment at higher energies; another appendix lists workshop participants. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database

Process applications for geothermal energy resources. Final report

Energy Technology Data Exchange (ETDEWEB)

Mikic, B.B.; Meal, H.C.; Packer, M.B.; Guillamon-Duch, H.

1981-08-01

The principal goal of the program was to demonstrate economical and technical suitability of geothermal energy as a source of industrial process heat through a cooperative program with industrial firms. To accomplish that: a critical literature survey in the field was performed; a workshop with the paper and pulp industry representatives was organized; and four parallel methods dealing with technical and economical details of geothermal energy use as a source of industrial process heat were developed.

Signal sciences workshop proceedings

Energy Technology Data Exchange (ETDEWEB)

Candy, J.V.

1997-05-01

This meeting is aimed primarily at signal processing and controls. The technical program for the 1997 Workshop includes a variety of efforts in the Signal Sciences with applications in the Microtechnology Area a new program at LLNL and a future area of application for both Signal/Image Sciences. Special sessions organized by various individuals in Seismic and Optical Signal Processing as well as Micro-Impulse Radar Processing highlight the program, while the speakers at the Signal Processing Applications session discuss various applications of signal processing/control to real world problems. For the more theoretical, a session on Signal Processing Algorithms was organized as well as for the more pragmatic, featuring a session on Real-Time Signal Processing.

Signal sciences workshop. Proceedings

International Nuclear Information System (INIS)

Candy, J.V.

1997-01-01

This meeting is aimed primarily at signal processing and controls. The technical program for the 1997 Workshop includes a variety of efforts in the Signal Sciences with applications in the Microtechnology Area a new program at LLNL and a future area of application for both Signal/Image Sciences. Special sessions organized by various individuals in Seismic and Optical Signal Processing as well as Micro-Impulse Radar Processing highlight the program, while the speakers at the Signal Processing Applications session discuss various applications of signal processing/control to real world problems. For the more theoretical, a session on Signal Processing Algorithms was organized as well as for the more pragmatic, featuring a session on Real-Time Signal Processing

BrainMap `95 workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

The fourth annual BrainMap workshop was held at La Mansion del Rio Hotel in San Antonio December 3--4, 1995. The conference title was ``Human Brain Mapping and Modeling.`` The meeting was attended by 137 registered participants and 30 observers from 82 institutions representing 12 countries. The meeting focused on the technical issues associated with brain mapping and modeling. A total of 23 papers were presented covering the following topics: spatial normalization and registration; functional image analysis; metanalysis and modeling; and new horizons in biological databases. The full program with abstracts was available on the Research Imaging Center`s web site. A book will be published by John Wiley and Sons prior to the end of 1998.

Workshop on radiation protection of patient. Workshop on radiation protection of worker in nuclear medicine and biomedicine

International Nuclear Information System (INIS)

1998-01-01

In these workshops, information on the following subjects was presented: biological and prenatal effects of ionizing radiation, excretion of radiopharmaceuticals in human breast milk, fetal doses assessment, final disposal of radioactive waste in medical applications, regulatory functions for installations in nuclear medicine, workers doses in nuclear medicine and biomedicine, radioprotection of their nuclear installations, programs of quality assurance, etc

Fiscal 1998 engineer interexchange project (coal mine technology field). International interexchange project (Workshop in Japan); 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya). Kokusai koryu jigyo (kokunai workshop)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This report summarizes the workshop and technical tour held in Japan for technical interexchange of domestic and overseas engineers. From the information obtained, the higher productivity of coal mines is dependent on selective mining under blessed geological conditions, however, basically establishment of an advanced management technique for inexpensive stable operation. Both preliminary collection of geological information and introduction of advanced facilities even under unstable conditions are necessary. The balance and optimization of the whole system, and an excellent human nature for operation are also essential. Use of roof bolt supports is diffusing as improvement technology of excavation speed and roof control technology over the world. However, for introduction of new technologies, collection of test results and various kinds of training are necessary. Methane gas in coal seams as the main theme of the Hokkaido workshop is a precious unused natural resource, and important for prevention of global warming and coal mine protection measures. Its use is dependent on development of gas drainage technology. (NEDO)

Workshop introduction

International Nuclear Information System (INIS)

Streeper, Charles

2010-01-01

Category I and II) sources in thousands of devices; and there are many more tens of thousands of smaller sources scattered among thousands of other NRC licensees. As a result of the ubiquitous nature and undeterminable number of current and legacy sources, even in developed countries they can be abandoned, disposed of in a haphazard manner, lost, stolen, and/or otherwise fallout of regulatory control. Supply and demand of sources, being market based, is more or less fluid. Normative security of radioactive sources exists, but varies in each country, and is loosely implemented through non-legally binding recommendations and standards provided by International Atomic Energy Agency technical documents and cooperation and through bilateral efforts such as this workshop where we share best-practices with one another. Much of the reason for the difficulty in securing sealed sources rests in the enormous need for their beneficial applications in the medical, industrial, and agricultural sectors. Alternative technologies to replace high-risk sources continue to be explored, but very few of these alternative solutions have reached the development stage for common usage and distribution. The beneficial uses of sources must be allowed to continue; however, to minimize the potential for their misuse, current controls and regulating mechanisms must be constantly evaluated to ensure the benefits gained outweigh potential risks. From a global perspective, an evaluation and modification of requirements over the entire life cycle of sources from their manufacture to their final disposition is required. The proper removal and disposal of vulnerable disused or orphan sources is essential to maintaining a safe operating environment. One of our goals in this workshop is to share our methodologies for recovering sources and learn how they differ or are similar to the challenges faced in recovering, storing, and disposing of sources in the Republic of Georgia . The suggestions we will make are

International magnetic pulse compression workshop: (Proceedings)

Energy Technology Data Exchange (ETDEWEB)

Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

1991-04-01

A few individuals have tried to broaden the understanding of specific and salient pulsed-power topics. One such attempt is this documentation of a workshop on magnetic switching as it applies primarily to pulse compression (power transformation), affording a truly international perspective by its participants under the initiative and leadership of Hugh Kirbie and Mark Newton of the Lawrence Livermore National Laboratory (LLNL) and supported by other interested organizations. During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card--its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants.

International magnetic pulse compression workshop: [Proceedings

International Nuclear Information System (INIS)

Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

1991-04-01

A few individuals have tried to broaden the understanding of specific and salient pulsed-power topics. One such attempt is this documentation of a workshop on magnetic switching as it applies primarily to pulse compression (power transformation), affording a truly international perspective by its participants under the initiative and leadership of Hugh Kirbie and Mark Newton of the Lawrence Livermore National Laboratory (LLNL) and supported by other interested organizations. During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card--its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants

Report from the 3rd Workshop on Extremely Large Databases

Directory of Open Access Journals (Sweden)

Jacek Becla

2010-02-01

Full Text Available Academic and industrial users are increasingly facing the challenge of petabytes of data, but managing and analyzing such large data sets still remains a daunting task. Both the database and the map/reduce communities worldwide are working on addressing these issues. The 3rdExtremely Large Databases workshop was organized to examine the needs of scientific communities beginning to face these issues, to reach out to European communities working on extremely large scale data challenges, and to brainstorm possible solutions. The science benchmark that emerged from the 2nd workshop in this series was also debated. This paper is the final report of the discussions and activities at this workshop.

Final Technical Report Transport Task Force Activities

International Nuclear Information System (INIS)

P.W. Terry

2006-01-01

The Transport Task Force has functioned as the primary scientific organization in the area of magnetic-fusion confinement and transport since its inception in 1988. It has defined and set research directions, coordinated broad research efforts, advocated new funding initiatives, and created a highly successful and widely admired interactive culture between experiment, theory and modeling. The Transport Task Force carries out its activities under the direction of its chair and the Executive Committee. The Executive Committee is comprised of the leaders and deputy leaders of the scientific working groups. The working groups are structured and organized according to research needs and priorities and have been organized around the areas of Core Transport, H Mode and Pedestal, Fast Particle Transport, Transient Transport Phenomena, and Modeling and Simulation. A steering committee provides advise on TTF activities. Further information on the working groups and the structure and management of the TTF can be found at http://psfcwww2.psfc.mit.edu/ttf/index.html. The TTF holds an annual workshop. A summary of the workshops held during the period of this report is given in Appendix I. During the period of this report the Transport Task Force was involved in several significant activities. Foremost of these was a sweeping review of the status of transport science, the key research tasks for progress during the next 5-10 years, and a proposal for a funding initiative to ensure application of adequate resources to these problems. The conclusions of this study were incorporated into a white paper, which is copied below in Appendix II. Other significant activities have included the introduction of an extended, ongoing discussion on verification and validation as a requisite for defining and codifying the path toward predictive capability, the orchestration of a gradual shift of focus from ion thermal confinement to electron thermal confinement, and a joining of efforts on edge

Transparency, citizen participation, organisation and roles. Report from the third RISCOM-II Workshop

International Nuclear Information System (INIS)

Andersson, Kjell; Paeivioe, Josefin

2003-10-01

This workshop was the final one in a series of three workshops within the RISCOM II project. It was an event where the RISCOM group of researchers disseminated the results to a wider circle of the nuclear waste management community in Europe with the focus on their own 'peers' in participating countries. However, the aim was not just to present RISCOM II results but also to see them in the context of adjacent projects. Especially, the workshop was set up in cooperation with the NEA Forum on Stakeholder Confidence (FSC) since this was seen as a good opportunity for exchange of experiences between the two activities. There was also participation by representatives from the EC COWAM Concerted Action and one presentation was devoted to this activity. There was thus an opportunity to discuss the three activities together. A draft of the RISCOM II Final Report had been made available for workshop participants before the meeting. The first part of the workshop entitled Transparency and citizen participation was moderated by Yves Le Bars, FSC chairman, and president of ANDRA. The second part dealt with Outcomes of the RISCOM Project and was moderated by Elizabeth Atherton from UK Nirex. Magnus Westerlind (SKI), the RISCOM-II coordinator, moderated the third part that dealt with Organisation and roles

NEET-AMM Final Technical Report on Laser Direct Manufacturing (LDM) for Nuclear Power Components

International Nuclear Information System (INIS)

Anderson, Scott; Baca, Georgina; O'Connor, Michael

2015-01-01

Final technical report summarizes the program progress and technical accomplishments of the Laser Direct Manufacturing (LDM) for Nuclear Power Components project. A series of experiments varying build process parameters (scan speed and laser power) were conducted at the outset to establish the optimal build conditions for each of the alloys. Fabrication was completed in collaboration with Quad City Manufacturing Laboratory (QCML). The density of all sample specimens was measured and compared to literature values. Optimal build process conditions giving fabricated part densities close to literature values were chosen for making mechanical test coupons. Test coupons whose principal axis is on the x-y plane (perpendicular to build direction) and on the z plane (parallel to build direction) were built and tested as part of the experimental build matrix to understand the impact of the anisotropic nature of the process.. Investigations are described 316L SS, Inconel 600, 718 and 800 and oxide dispersion strengthed 316L SS (Yttria) alloys.

NEET-AMM Final Technical Report on Laser Direct Manufacturing (LDM) for Nuclear Power Components

Energy Technology Data Exchange (ETDEWEB)

Anderson, Scott [Lockheed Martin Corporation, Denver, CO (United States). Space Systems Company; Baca, Georgina [Lockheed Martin Corporation, Denver, CO (United States). Space Systems Company; O' Connor, Michael [Lockheed Martin Corporation, Denver, CO (United States). Space Systems Company

2015-12-31

Final technical report summarizes the program progress and technical accomplishments of the Laser Direct Manufacturing (LDM) for Nuclear Power Components project. A series of experiments varying build process parameters (scan speed and laser power) were conducted at the outset to establish the optimal build conditions for each of the alloys. Fabrication was completed in collaboration with Quad City Manufacturing Laboratory (QCML). The density of all sample specimens was measured and compared to literature values. Optimal build process conditions giving fabricated part densities close to literature values were chosen for making mechanical test coupons. Test coupons whose principal axis is on the x-y plane (perpendicular to build direction) and on the z plane (parallel to build direction) were built and tested as part of the experimental build matrix to understand the impact of the anisotropic nature of the process.. Investigations are described 316L SS, Inconel 600, 718 and 800 and oxide dispersion strengthed 316L SS (Yttria) alloys.

Media Ethnographic Methods targeting students in a technical education (Medialogy)

DEFF Research Database (Denmark)

Petersson, Eva; Kofoed, Lise B.

2012-01-01

This paper investigates the process of designing, executing and evaluating a Bachelor “soft” skills based course, Media Ethnographic Methods targeting students in a technical education (Medialogy). The course was designed as a creative workshop encouraging innovation, group dynamics...

Synthesis report of the End-Users survey and review of ASAMPSA-E guidance and final workshop conclusions. Identification of follow-up useful activities after ASAMPSA-E

International Nuclear Information System (INIS)

Guigueno, Yves; Rahni, Nadia; Vasseur, Dominique; Brac, Pascal; Nitoi, Mirela; Prosek, Andrej; Ostapchuk, Serhii; Gumenyuk, Dmytro; Ivanov, Ivan

2017-01-01

The ASAMPSA-E project aims at helping to develop efficiently PSAs methodologies able to identify low probability events or combinations of events which can lead to extreme consequences and at discussing their application in the NPP safety enhancement decision making process. Seventeen draft reports, related to general issues for extended PSA, selection of hazards and development of PSAs have been written during the main phase of the project. They reflect the expertise and experience available within the project. Preliminary versions of the reports have been sent for external review together with a final questionnaire. The objective of the review was to collect proposal for improvements of the preliminary ASAMPSA-E reports while the objectives of the questionnaire was to gather PSA End-Users opinions on the fulfilment of their initial needs, on conclusions and recommendations presented in the reports and on additional needs. This document presents the responses to the questionnaire and a synthesis of improvements proposed by reviewers. A draft version has been used to present the responses and feedbacks during an international workshop hosted by Vienna University on 12, 13 and 14 September 2016. The final version of this document incorporates a synthesis of the discussions during the Vienna workshop. (authors)

Nuclear Physics Science Network Requirements Workshop, May 6 and 7, 2008. Final Report

International Nuclear Information System (INIS)

Tierney, Ed. Brian L; Dart, Ed. Eli; Carlson, Rich; Dattoria, Vince; Ernest, Michael; Hitchcock, Daniel; Johnston, William; Kowalski, Andy; Lauret, Jerome; Maguire, Charles; Olson, Douglas; Purschke, Martin; Rai, Gulshan; Watson, Chip; Vale, Carla

2008-01-01

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States of America. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In May 2008, ESnet and the Nuclear Physics (NP) Program Office of the DOE Office of Science organized a workshop to characterize the networking requirements of the science programs funded by the NP Program Office. Most of the key DOE sites for NP related work will require significant increases in network bandwidth in the 5 year time frame. This includes roughly 40 Gbps for BNL, and 20 Gbps for NERSC. Total transatlantic requirements are on the order of 40 Gbps, and transpacific requirements are on the order of 30 Gbps. Other key sites are Vanderbilt University and MIT, which will need on the order of 20 Gbps bandwidth to support data transfers for the CMS Heavy Ion program. In addition to bandwidth requirements, the workshop emphasized several points in regard to science process and collaboration. One key point is the heavy reliance on Grid tools and infrastructure (both PKI and tools such as GridFTP) by the NP community. The reliance on Grid software is expected to increase in the future. Therefore, continued development and support of Grid software is very important to the NP science community. Another key finding is that scientific productivity is greatly enhanced by easy researcher-local access to instrument data. This is driving the creation of distributed repositories for instrument data at collaborating institutions, along with a corresponding increase in demand for network-based data transfers and the tools

Introduction Workshop for New Students in the CDIO Program

DEFF Research Database (Denmark)

Christensen, Jørgen Erik

2009-01-01

The engineering education has traditionally focused on the technical skills rather than on personal development. However, the personal competence is becoming more and more important, including the communications skills. One of the challenges in modern engineering education is the ability to focus...... on both the technical and personal development in order to educate an engineer who can solve both technical and humanistic problems; thus creating god results from an all round prospect. This workshop is an introduction to communication and will demand an active involvement for the participants...... at the CDIO conference. The purpose is to give the CDIO staff a personal idea of a different approach to communication between new students and how they can get to know each other faster in a better way. Education of students today will typically involve both national and international students. However...

Report of the workshop Energy Utility and Solar Water Heater 1993

International Nuclear Information System (INIS)

1993-01-01

The title workshop was organized to increase the interest of energy utilities for the Solar Water Heater campaign by providing representatives of the utilities with information about the technical and marketing aspects of solar boilers, and to stimulate knowledge transfer between the energy utilities about the method, the possibilities and bottlenecks of solar water heater projects

Advanced Insider Threat Mitigation Workshop Instructional Materials

Energy Technology Data Exchange (ETDEWEB)

Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O' Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Edmunds, Tom [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2009-02-01

Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt and protracted theft of nuclear materials. This particular set of materials is an update of a January 2008 version to add increased emphasis on Material Control and Accounting and its role with respect to protracted insider nuclear material theft scenarios. This report is a compilation of workshop materials consisting of lectures on technical and administrative measures used in Physical Protection (PP) and Material Control and Accounting (MC&A) and methods for analyzing their effectiveness against a postulated insider threat. The postulated threat includes both abrupt and protracted theft scenarios. Presentation is envisioned to be through classroom instruction and discussion. Several practical and group exercises are included for demonstration and application of the analysis approach contained in the lecture/discussion sessions as applied to a hypothetical nuclear facility.

International workshop on transparency technology for nonproliferation cooperation in the Asia Pacific. Applications of remote monitoring and secure communications for regional confidence building

International Nuclear Information System (INIS)

Betsill, J. David; Hashimoto, Yu

2009-08-01

The Japan Atomic Energy Agency (JAEA) sponsored an international workshop 20-22 February 2008 on 'Transparency Technology for Nonproliferation Cooperation in the Asia Pacific - Applications of Remote Monitoring and Secure Communications for Regional Confidence Building.' The Workshop focused on identifying appropriate roles and functions for Transparency in addressing nonproliferation concerns associated with the use of nuclear energy, particularly in the East Asia region. Participants from several East Asia countries included representatives from nuclear energy research institutions, Ministries, facility operators, and non-governmental organizations. Regional participation from countries currently developing their nuclear energy infrastructure was also encouraged. Several promising students from the University of Tokyo and the Tokyo Institute of Technology, representing the next generation of nuclear energy experts, also participated in the meeting and added significant value and fresh viewpoints. The participants agreed that transparency has many roles and definitions, and that its usefulness ranges for verification and compliance with the Nonproliferation Treaty (NPT) to building trust and confidence in the activities of the state and other regional nuclear energy stakeholders. In addition, they identified a need for further education among the professional community, public, operators, and regulators as a key factor in transparency effectiveness. Also, the education and cultivation of the next generation of nuclear energy experts was identified as crucial to the long-term success and acceptance of nuclear energy development. And finally, that the development, selection, and implementation of technology that is appropriate to the goals and participants of a transparency effort are unique to each situation and are key to the successful acceptance of cooperative transparency and regional confidence building. At the conclusion of the Workshop it was importantly

Proceedings of the advisory committee on reactor safeguards workshop on future reactors

International Nuclear Information System (INIS)

2001-12-01

This report contains the information presented at the Advisory Committee on Reactor Safeguards Workshop on Future Reactors held at the Nuclear Regulatory Commission headquarters in Rockville, Maryland, on June 4-5, 2001. Included are the subject matter summaries, followed by the presentation material and selected participants discussions. The primary purpose of the workshop was to identify the regulatory challenges associated with future reactor designs. A list of such challenges was developed from the workshop notes, the various presentations, the panel discussions and the question and answer sessions. This list is included in the Introduction section of this document. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final workshop agenda

Proceedings of the advisory committee on reactor safeguards workshop on future reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-12-01

This report contains the information presented at the Advisory Committee on Reactor Safeguards Workshop on Future Reactors held at the Nuclear Regulatory Commission headquarters in Rockville, Maryland, on June 4-5, 2001. Included are the subject matter summaries, followed by the presentation material and selected participants discussions. The primary purpose of the workshop was to identify the regulatory challenges associated with future reactor designs. A list of such challenges was developed from the workshop notes, the various presentations, the panel discussions and the question and answer sessions. This list is included in the Introduction section of this document. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final workshop agenda.

Digital Mapping Techniques '11–12 workshop proceedings

Science.gov (United States)

Soller, David R.

2014-01-01

The Digital Mapping Techniques '11 (DMT'11) workshop was hosted by Virginia Division of Geology and Mineral Resources and The College of William & Mary, and coordinated by the National Geologic Map Database project. Conducted May 22-25 on the campus of The College of William & Mary, in Williamsburg, Virginia, it was attended by 77 technical experts from 30 agencies, universities, and private companies, including representatives from 19 State geological surveys (see "DMT'11 Presentations and Attendees" in these Proceedings).

National Educators' Workshop: Update 2002 - Standard Experiments in Engineering, Materials Science, and Technology

Science.gov (United States)

Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Chung, W. Richard (Compiler)

2003-01-01

This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 2002 held in San Jose, California, October 13-16,2002. This publication provides experiments and demonstrations that can serve as a valuable guide to faculty who are interested in useful activities for their students. The material was the result of years of research aimed at better methods of teaching technical subjects. The experiments developed by faculty, scientists, and engineers throughout the United States and abroad add to the collection from past workshops. They include a blend of experiments on new materials and traditional materials.

Proceedings of the 7th US/German Workshop on Salt Repository Research, Design, and Operation.

Energy Technology Data Exchange (ETDEWEB)

Hansen, Francis D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steininger, Walter [Karisruhe Inst. of Technology (Germany); Bollingerfehr, Willhelm [DBE TECHNOLOGY GmbH (Germany)

2017-01-01

The 7th US/German Workshop on Salt Repository Research, Design, and Operation was held in Washington, DC on September 7-9, 2016. Over fifty participants representing governmental agencies, internationally recognized salt research groups, universities, and private companies helped advance the technical basis for salt disposal of radioactive waste. Representatives from several United States federal agencies were able to attend, including the Department of Energy´s Office of Environmental Management and Office of Nuclear Energy, the Environmental Protection Agency, the Nuclear Regulatory Commission, and the Nuclear Waste Technical Review Board. A similar representation from the German ministries showcased the covenant established in a Memorandum of Understanding executed between the United States and Germany in 2011. The US/German workshops´ results and activities also contribute significantly to the Nuclear Energy Agency Salt Club repository research agenda.

Technical basis for the ITER final design report, cost review and safety analysis (FDR)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

The ITER final design report, cost review and safety analysis (FDR) is the 4th major milestone, representing the progress made in the ITER Engineering Design Activities. With the approval of the Detailed Design Report (DDR), the design work was concentrated on the requirements of operation, with only relatively minor changes to design concepts of major components. The FDR is the culmination of almost 6 years collaborative design and supporting technical work by the ITER Joint Central Team and Home Teams under the terms of the ITER EDA Agreement. Refs, figs, tabs

Technical basis for the ITER final design report, cost review and safety analysis (FDR)

International Nuclear Information System (INIS)

1998-01-01

The ITER final design report, cost review and safety analysis (FDR) is the 4th major milestone, representing the progress made in the ITER Engineering Design Activities. With the approval of the Detailed Design Report (DDR), the design work was concentrated on the requirements of operation, with only relatively minor changes to design concepts of major components. The FDR is the culmination of almost 6 years collaborative design and supporting technical work by the ITER Joint Central Team and Home Teams under the terms of the ITER EDA Agreement

First Joint Workshop on Energy Management for Large-Scale Research Infrastructures

CERN Document Server

2011-01-01

  CERN, ERF (European Association of National Research Facilities) and ESS (European Spallation Source) announce the first Joint Workshop on Energy Management for Large-Scale Research Infrastructures. The event will take place on 13-14 October 2011 at the ESS office in Sparta - Lund, Sweden.   The workshop will bring together international experts on energy and representatives from laboratories and future projects all over the world in order to identify the challenges and best practice in respect of energy efficiency and optimization, solutions and implementation as well as to review the challenges represented by potential future technical solutions and the tools for effective collaboration. Further information at: http://ess-scandinavia.eu/general-information

Technical review of externalities issues. Final report

International Nuclear Information System (INIS)

Niemeyer, V.

1994-12-01

Externalities has become the catchword for a major experiment in electric utility regulation. Together with increased competition as a means for economic regulation, this experiment represents a potential revolution in how electric utilities are regulated. It is very important for utilities and policy makers to understand the technical issues and arguments driving the externality experiment. This Technical Review presents four papers covering topics in economics that may play important roles in this revolution. The four papers are: Economic Issues in the Application of Externalities to Electricity Resource Selection; Climate Change, the Marginal Cost of Carbon Dioxide Emissions and the Implications for Carbon Dioxide Emissions Adders; Positive Externalities and Benefits from Electricity; and Socioeconomic Effects of Externality Adders for Electric Utility Emissions

Digital mapping techniques '00, workshop proceedings - May 17-20, 2000, Lexington, Kentucky

Science.gov (United States)

Soller, David R.

2000-01-01

Introduction: The Digital Mapping Techniques '00 (DMT'00) workshop was attended by 99 technical experts from 42 agencies, universities, and private companies, including representatives from 28 state geological surveys (see Appendix A). This workshop was similar in nature to the first three meetings, held in June, 1997, in Lawrence, Kansas (Soller, 1997), in May, 1998, in Champaign, Illinois (Soller, 1998a), and in May, 1999, in Madison, Wisconsin (Soller, 1999). This year's meeting was hosted by the Kentucky Geological Survey, from May 17 to 20, 2000, on the University of Kentucky campus in Lexington. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. When, based on discussions at the workshop, an attendee adopts or modifies a newly learned technique, the workshop clearly has met that objective. Evidence of learning and cooperation among participating agencies continued to be a highlight of the DMT workshops (see example in Soller, 1998b, and various papers in this volume). The meeting's general goal was to help move the state geological surveys and the USGS toward development of more cost-effective, flexible, and useful systems for digital mapping and geographic information systems (GIS) analysis. Through oral and poster presentations and special discussion sessions, emphasis was given to: 1) methods for creating and publishing map products (here, 'publishing' includes Web-based release); 2) continued development of the National Geologic Map Database; 3) progress toward building a standard geologic map data model; 4) field data-collection systems; and 5) map citation and authorship guidelines. Four representatives of the GIS hardware and software vendor community were invited to participate. The four annual DMT workshops were coordinated by the AASG/USGS Data Capture Working Group, which was formed in August, 1996, to support the Association of American State Geologists and the USGS in their effort

[Development and assessment of a workshop on repair of third and fourth degree obstetric tears].

Science.gov (United States)

Emmanuelli, V; Lucot, J-P; Closset, E; Cosson, M; Deruelle, P

2013-04-01

To evaluate the educational interest of a workshop on diagnosis and repair of obstetric anal sphincter injuries (OASIS). To evaluate the theoretical and anatomical knowledge of OASIS repair by French residents in obstetrics and gynecology. The workshop was composed of slides, video of repair and training using cadaveric sow's anal sphincters. All subjects were tested with a questionnaire before and after the course. Thirty residents participated. Classification of OASIS was known by 13.3% of the residents before the training versus 93.3% after the workshop (PIAS) versus 3% at post-test (PIAS and only one third knew the technical repair of the EAS. After the workshop, the theoretical knowledge of EAS and IAS repair were acquired by all (P<0.001). Structured hands-on training improves significantly the knowledge of OASIS diagnosis and repair. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Final Scientific Technical Report Crowder College MARET Center

Energy Technology Data Exchange (ETDEWEB)

Boyt, Art [Crowder College, Neosho, MO (United States); Eberle, Dan [Crowder College, Neosho, MO (United States); Hudson, Pam [Crowder College, Neosho, MO (United States); Hopper, Russ [Crowder College, Neosho, MO (United States)

2013-06-30

, exploring and validating new applications of solar and other renewable technologies, the MARET Facility will house a wide variety of programs which will advance implementation of renewable energy throughout the region. These program goals include; Curriculum in renewable energy for pre-engineering transfer programs; Certification and degree programs for technical degrees for Energy Efficiency, Wind, Photovoltaic and Solar Thermal professionals; Short courses and workshops for building management and design professionals; Public education and demonstration projects in renewable energy through conferences and K-12 educational outreach; Technical degree offering in building construction incorporating “best practices” for energy efficiency and renewables; and Business incubators for new renewable energy businesses and new product development The new MARET facility will support the mission of the US Department of Energy (DOE) Solar Program, “to improve America’s security, environmental quality, and economic prosperity through public-private partnerships that bring reliable and affordable solar energy technologies to the marketplace,” through a variety of educational and business assistance programs. Further, technical innovations planned for the MARET facility and its applied research activities will advance the Solar Program strategic goals to “reduce the cost of solar energy to the point it becomes competitive in relevant energy markets (e.g., buildings, power plants) and for solar technology to enable a sustainable solar industry.” Overarching Goals relative to program needs, future expansion, flexibility, quality of materials, and construction and operational costs:; Experimental: The structure and systems of the building operate as an educational resource. The systems are meant to be a source for data collection and study for building users and instructors; Educational: Part of the evolution of this building and its ongoing goals is to use the building as an

Proceedings of the OECD/NEA workshop on the relations between seismological data and seismic engineering

International Nuclear Information System (INIS)

2003-01-01

The Committee on the Safety of Nuclear Installations (CSNI) of the OECD-NEA co-ordinates the NEA activities concerning the technical aspects of design, construction and operation of nuclear installations insofar as they affect the safety of such installations. The Integrity and Ageing Working Group (IAGE WG) of the CSNI deals with the integrity of structures and components, and has three sub-groups, dealing with the integrity of metal components and structures, ageing of concrete structures, and the seismic behaviour of structures. The sub-group dealing with the seismic behaviour of structures proposed this workshop. The OECD-NEA workshop on the relations between seismological data and seismic engineering analyses was held on October 17-18, 2002. A field visits in the Izmit area where the fault scarp is still visible was organised on Wednesday October 16, 2002. The Ttirkiye Atom Enerjisi Kurumu, TAEK (Turkish Atomic Energy Agency) in Istanbul, Turkey, hosted the workshop. A recommendation of the OECD workshop on the engineering characterisation of seismic input (hosted by the United States Nuclear Regulatory Commission and organised by Brookhaven National Laboratory on November 15-17, 1999) was to foster the growth of interaction between 'design engineers' and 'ground motion specialists'. The objective of the Istanbul workshop is to address this recommendation. The workshop gave seismologists the opportunity to present observed damages and their related ground motions and design engineers the opportunity to present current techniques used in the evaluation of seismic hazards. Bridging the gap between these two fields was a key objective - this workshop was a forum for bringing together the two communities. In addition, the location of the workshop was particularly interesting and provided possibilities for several of the host country participants to discuss the 1999 Kocaeli earthquake. On the basis of lessons learned from large earthquakes over the last decade, the

Workshop report and proposal for a new IEA Task: Daylight in buildings

Energy Technology Data Exchange (ETDEWEB)

Kristensen, P E; Johnsen, K

1994-04-01

The IEA workshop on Daylight in Buildings was held in Copenhagen on March 14-16, 1994. At the workshop, presentations were given on key topics as a basis for discussions by the experts participating in the meeting. The presentations and discussions covered a range of technical, architectural and amenity aspects of daylighting in buildings. A great interest in research collaboration on daylight was expressed, and it was agreed that plenty of work still needs to be done, and that the appropriate form of work would be an IEA Task. It was agreed that daylighting systems and control strategies should be evaluated and tested in test rooms, as well as in existing buildings as case studies. Furthermore, the workshop expressed that one of the best ways to realize and present the Task results to practice would be through a few demonstration buildings, build in different countries and under different climatic conditions. (EG)

Rotational Seismology Workshop of February 2006

Science.gov (United States)

Evans, John R.; Cochard, A.; Graizer, Vladimir; Huang, Bor-Shouh; Hudnut, Kenneth W.; Hutt, Charles R.; Igel, H.; Lee, William H.K.; Liu, Chun-Chi; Majewski, Eugeniusz; Nigbor, Robert; Safak, Erdal; Savage, William U.; Schreiber, U.; Teisseyre, Roman; Trifunac, Mihailo; Wassermann, J.; Wu, Chien-Fu

2007-01-01

seismology (Cochard, Igel, Schreiber, Teisseyre, Wassermann, Majewski), sensor-calibration issues (Evans, Hutt), and finally the summary and conclusions (Savage). As a direct result of the 2006 Workshop and the formation of IWGoRS, we held a special session at the Fall 2006 AGU meeting (convened by H. Igel, W.H.K. Lee, and M.I. Todorovska). Currently, the first formal Workshop of the IWGoRS is being organized by W.H.K. Lee, M. Celebi, and M. I. Todorovska with sponsorship by the USGS and assistance from many others; this First International Workshop on Rotational Seismology and Engineering Applications will be held in September 2007 at Menlo Park, California (http://pubs.usgs.gov/of/2007/1144/). The following summarizes presentations and discussions during and shortly after the informal Workshop of February 2006.

PROCEEDINGS OF THE 1983 DPF WORKSHOP ON COLLIDER DETECTORS: PRESENT CAPABILITIES AND FUTURE POSSIBILITIES, FEB. 28 - MARCH 4, 1983.

Energy Technology Data Exchange (ETDEWEB)

Loken Ed, S.C.; Nemethy Ed, P.

1983-04-01

It is useful before beginning our work here to restate briefly the purpose of this workshop in the light of the present circumstances of elementary particle physics in the U.S. The goal of our field is easily stated in a general way: it is to reach higher center of mass energies and higher luminosities while employing more sensitive and more versatile event detectors, all in order to probe more deeply into the physics of elementary particles. The obstacles to achieving this goal are equally apparent. Escalating costs of construction and operation of our facilities limit alternatives and force us to make hard choices among those alternatives. The necessity to be highly selective in the choice of facilities, in conjunction with the need for increased manpower concentrations to build accelerators and mount experiments, leads to complex social problems within the science. As the frontier is removed ever further, serious technical difficulties and limitations arise. Finally, competition, much of which is usually healthy, now manifests itself with greater intensity on a regional basis within our country and also on an international scale. In the far ({ge}20 yr) future, collaboration on physics facilities by two or more of the major economic entities of the world will possibly be forthcoming. In the near future, we are left to bypass or overcome these obstacles on a regional scale as best we can. The choices we face are in part indicated in the list of planned and contemplated accelerators shown in Table I. The facilities indicated with an asterisk pose immediate questions: (1) Do we need them all and what should be their precise properties? (2) How are the ones we choose to be realized? (3) What is the nature of the detectors to exploit those facilities? (4) How do we respond to the challenge of higher luminosity as well as higher energy in those colliders? The decision-making process in this country and elsewhere depends on the answers to these technical questions

Proceedings of the IEA-technical workshop on the test cell system for an international fusion materials irradiation facility, Karlsruhe, Germany, July 3-6, 1995. IEA-implementing agreement for a programme of research and development on fusion materials

International Nuclear Information System (INIS)

Moeslang, A.; Lindau, R.

1995-09-01

After a Conceptual Design Activity (CDA) study on an International Fusion Material Irradiation Facility (IFMIF) has been launched under the auspices of the IEA, working groups and relevant tasks have been defined and agreed in an IEA-workshop that was held September 26-29 1994 at Karlsruhe. For the Test Cell System 11 tasks were identified which can be grouped into the three major fields neutronics, test matrix/users and test cell engineering. In order to discuss recently achieved results and to coordinate necessary activities for an effective design integration, a technical workshop on the Test Cell System was initiated. This workshop was organized on July 3-6 1995 by the Institute for Materials Research I at the Forschungszentrum Karlsruhe and attended by 20 specialists working in the fields neutronics, fusion materials R and D and test cell engineering in the European Union, Japan, and the United States of America. The presentations and discussions during this workshop have shown together with the elaborated lists of action items, that has been achieved in all three fields, and that from the future IFMIF experimental program for a number of materials a database covering widerspread loading conditions up to DEMO-reactor relevant end-of-life damage levels can be expected. (orig.)

Technical study gas storage. Final report

International Nuclear Information System (INIS)

Borowka, J.; Moeller, A.; Zander, W.; Koischwitz, M.A.

2001-01-01

This study will answer the following questions: (a) For what uses was the storage facility designed and for what use is it currently applied? Provide an overview of the technical data per gas storage facility: for instance, what is its capacity, volume, start-up time, etc.; (b) How often has this facility been used during the past 10 years? With what purpose was the facility brought into operation at the time? How much gas was supplied at the time from the storage facility?; (c) Given the characteristics and the use of the storage facility during the past 10 years and projected gas consumption in the future, how will the storage facility be used in the future?; (d) Are there other uses for which the gas storage facility can be deployed, or can a single facility be deployed for numerous uses? What are the technical possibilities in such cases? Questions (a) and (b) are answered separately for every storage facility. Questions (c) and (d) in a single chapter each (Chapter 2 and 3). An overview of the relevant storage data relating to current use, use in the last 10 years and use in future is given in the Annex

2. JAPAN-IAEA workshop on advanced safeguards technology for the future nuclear fuel cycle. Abstracts

International Nuclear Information System (INIS)

2009-01-01

This international workshop addressed issues and technologies associated with safeguarding the future nuclear fuel cycle. The workshop discussed issues of interest to the safeguards community, facility operators and State Systems of accounting and control of nuclear materials. Topic areas covered were as follows: Current Status and Future Prospects of Developing Safeguards Technologies for Nuclear Fuel Cycle Facilities, Technology and Instrumentation Needs, Advanced Safeguards Technologies, Guidelines on Developing Instrumentation to Lead the Way for Implementing Future Safeguards, and Experiences and Lessons learned. This workshop was of interest to individuals and organizations concerned with future nuclear fuel cycle technical developments and safeguards technologies. This includes representatives from the nuclear industry, R and D organizations, safeguards inspectorates, State systems of accountancy and control, and Member States Support Programmes

International cooperation workshop on CTBTO international cooperation and national implementation for states from East and Southern Africa

International Nuclear Information System (INIS)

2002-09-01

In pursuant to its 2002 programme of work, the Provisional Technical Secretariat (PTS) of the Preparatory Commission of the Comprehensive Nuclear-Test-Ban Treaty Organization organized a workshop on CTBTO international cooperation and national implementation for states from East and Southern Africa in Nairobi, Kenya, from 18 to 20 June 2002. The summary report on the workshop has been provided, covering ways and means of promoting regional cooperation. The list of participants and the programme outline are annexed thereto

International cooperation workshop on CTBTO international cooperation and national implementation for states from East and Southern Africa

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-09-01

In pursuant to its 2002 programme of work, the Provisional Technical Secretariat (PTS) of the Preparatory Commission of the Comprehensive Nuclear-Test-Ban Treaty Organization organized a workshop on CTBTO international cooperation and national implementation for states from East and Southern Africa in Nairobi, Kenya, from 18 to 20 June 2002. The summary report on the workshop has been provided, covering ways and means of promoting regional cooperation. The list of participants and the programme outline are annexed thereto.

Quantum Testbeds Stakeholder Workshop (QTSW) Report meeting purpose and agenda.

Energy Technology Data Exchange (ETDEWEB)

Hebner, Gregory A.

2017-04-01

Quantum computing (QC) is a promising early-stage technology with the potential to provide scientific computing capabilities far beyond what is possible with even an Exascale computer in specific problems of relevance to the Office of Science. These include (but are not limited to) materials modeling, molecular dynamics, and quantum chromodynamics. However, commercial QC systems are not yet available and the technical maturity of current QC hardware, software, algorithms, and systems integration is woefully incomplete. Thus, there is a significant opportunity for DOE to define the technology building blocks, and solve the system integration issues to enable a revolutionary tool. Once realized, QC will have world changing impact on economic competitiveness, the scientific enterprise, and citizen well-being. Prior to this workshop, DOE / Office of Advanced Scientific Computing Research (ASCR) hosted a workshop in 2015 to explore QC scientific applications. The goal of that workshop was to assess the viability of QC technologies to meet the computational requirements in support of DOE’s science and energy mission and to identify the potential impact of these technologies.

Halden Reactor Project Workshop: Understanding Advanced Instrumentation and Controls Issues

International Nuclear Information System (INIS)

Beltracchi, L.

1991-01-01

A Halden Reactor Project Workshop on 'Understanding Advanced Instrumentation and Controls Issues' was held in Halden, Norway, during June 17-18, 1991. The objectives of the workshop were to (1) identify and prioritize the types of technical information that the Halden Project can produce to facilitate the development of man-machine interface guidelines and (2) to identify methods to effectively integrate and disseminate this information to signatory organizations. As a member of the Halden Reactor Project, the Nuclear Regulatory Commission (NRC) requested the workshop. This request resulted from the NRC's need for human factors guidelines for the evaluation of advanced instrumentation and controls. The Halden Reactor Project is a cooperative agreement among several countries belonging to the Organization for Economic Cooperation and Development (OECD). The US began its association with the Halden Project in 1958 through the Atomic Energy Commission. The project's activities are centered at the Halden heavy-water reactor and its associated man-machine laboratory in Halden, Norway. The research program conducted at Halden consists of studies on fuel performance and computer-based man-machine interfaces

Carbon dioxide storage in unconventional reservoirs workshop: summary of recommendations

Science.gov (United States)

Jones, Kevin B.; Blondes, Madalyn S.

2015-01-01

“Unconventional reservoirs” for carbon dioxide (CO2) storage—that is, geologic reservoirs in which changes to the rock trap CO2 and therefore contribute to CO2 storage—including coal, shale, basalt, and ultramafic rocks, were the focus of a U.S. Geological Survey (USGS) workshop held March 28 and 29, 2012, at the National Conservation Training Center in Shepherdstown, West Virginia. The goals of the workshop were to determine whether a detailed assessment of CO2 storage capacity in unconventional reservoirs is warranted, and if so, to build a set of recommendations that could be used to develop a methodology to assess this storage capacity. Such an assessment would address only the technically available resource, independent of economic or policy factors. At the end of the workshop, participants agreed that sufficient knowledge exists to allow an assessment of the potential CO2 storage resource in coals, organic-rich shales, and basalts. More work remains to be done before the storage resource in ultramafic rocks can be meaningfully assessed.

First workshop on the possibilities of biorefinery concepts for the industry : held at hotel "De Wageningse Berg", Wageningen, the Netherlands (16 June 2006) : official minutes

NARCIS (Netherlands)

Annevelink, E.; Jong, de E.; Ree, van R.; Zwart, R.W.R.

2006-01-01

On June the 16th the first ¿workshop on the possibilities of biorefinery concepts for the industry¿ was held, bringing together different Dutch stakeholders, and addressing common as well as conflicting technical and market issues with regard to biorefinery opportunities. The first-of-akind workshop

Workshop - Solar cells and daylight. Solar cell house. House building with integrated solar cell systems; Workshop - Solceller og dagslys. Solcellehus. Boligbyggeri med integrerede solcelleanlaeg

Energy Technology Data Exchange (ETDEWEB)

Schroeder, Mio; Hansen, Ellen Kathrine

2005-04-15

The workshop 'Solar cells and daylight' at Aarhus School of Architecture aimed at studying and developing architectural potentials of integrating solar cell systems in building components for future house building. The aim of the process was to stress that technical conditions such as energy technological component design might work as central points of support in the future shaping and organisation of qualitative and functional design of houses. (BA)

PREFACE: 16th European White Dwarfs Workshop

Science.gov (United States)

Garcia-Berro, Enrique; Hernanz, Margarita; Isern, Jordi; Torres, Santiago

2009-07-01

The 16th European Workshop on White Dwarfs was held in Barcelona, Spain, from 30 June to 4 July 2008 at the premises of the UPC. Almost 120 participants from Europe (France, Germany, United Kingdom, Italy, and several others), America (USA, Canada, Argentina, Brazil, and Chile), and other continents (Australia, South Africa, . . . ) attended the workshop. Among these participants were the most relevant specialists in the field. The topics covered by the conference were: White dwarf structure and evolution Progenitors and Planetary Nebulae White dwarfs in binaries: cataclysmic variables, double degenerates and other binaries White dwarfs, dust disks and planetary systems Atmospheres, chemical composition, magnetic fields Variable white dwarfs White dwarfs in stellar clusters and the halo White Dwarfs as SNIa progenitors The programme included 54 talks, and 45 posters. The oral presentations were distributed into the following sessions: Luminosity function, mass function and populations White dwarf structure and evolution White dwarf ages White dwarf catalogs and surveys Central stars of planetary nebulae Supernovae progenitors White dwarfs in novae and CVs Physical processes in white dwarfs and magnetic white dwarfs Disks, dust and planets around white dwarfs Pulsating white dwarfs Additionally we had a special open session about Spitzer and white dwarfs. The Proceedings of the 16th European Workshop on White Dwarfs are representative of the current state-of-the-art of the research field and include new and exciting results. We acknowledge the very positive attitude of the attendants to the workshop, which stimulated very fruitful discussions that took place in all the sessions and after the official schedule. Also, the meeting allowed new collaborations tp start that will undoubtedly result in significant advances in the research field. We also acknowledge the willingness of the participants to deliver their contributions before the final deadline. We sincerely

New Reactor Siting, Licensing and Construction Experience. Proceedings of the 2. CNRA International Workshop on 'New Reactor Siting, Licensing and Construction Experience'

International Nuclear Information System (INIS)

2013-01-01

This report documents the proceedings from the 2. Workshop on New Reactor Siting, Licensing and Construction Experience. A total of 45 specialists from 16 countries and international organisations attended. The meeting was sponsored by the OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities and hosted by the US Nuclear Regulatory Commission (U.S.NRC). The objectives of the workshop were to provide a forum to exchange information on lessons learned from siting, licensing and constructing new nuclear power plants around the world. Key focus areas included siting practices and regulatory positions that have been enhanced as a result of the Fukushima accident; lessons learned from licensing and design review approaches and challenges, construction experience and recommendations for regulatory oversight; and regulatory cooperation on generic and design specific issues through the MDEP specific working groups. The workshop was structured in 4 technical sessions, each followed by ample time for panel discussions. The first technical session was devoted to regulatory cooperation on generic and design specific issues, MDEP working groups (EPR, AP1000), vendor inspection co-operation, digital I and C, and codes and standards. The second technical session was intended to discuss and share regulatory positions on siting practices and enhancements as a result of lessons learned from Fukushima accident. The third technical session addressed the construction experience and regulatory oversight of new reactor construction activities. And the fourth technical session included presentations on the lessons learned from regulatory licensing reviews of new reactor designs

Conduct of inspections for plant modifications, event investigations and operability decisions. Proceedings of an International Workshop

International Nuclear Information System (INIS)

1995-01-01

Preliminary planning started following the approval given by the CNRA. Formal planning for the Workshop was started at the Fifth Meeting of the WGIP in April 1993, in Lyon. Planning included taking into consideration comments made and lessons learned at the first Workshop. The first organising committee meeting for the Workshop was held in London preceding the Sixth WGIP meeting in October 1993. It was decided to remain with the same format: discussion groups with facilitators. It was also decided to have a three day programme with three Discussion Group sessions. The Announcement and Call for Participation was issued in December 1993. As part of the Announcement and Call for Participation, registrants were requested to transmit questions or issues of particular interest within the selected topics, they wanted to be addressed at the Workshop. A compilation of the these is included as Appendix H. Additionally, participants were requested to provide a short paper of one or two pages, describing the practices within their own countries related to the topics, for utilisation during the discussion sessions. These papers are attached as Appendix I. A training session was held for all facilitators on the afternoon of 22 May, to introduce methods in leading small group discussions and to complete final preparations. The Workshop programme (Appendix B) consisted of an opening plenary session, 3 discussion group sessions and a closing plenary session to review conclusions and an open question period. Following completion of the Workshop, facilitators met to evaluate and formulate final reports on the various topics. The main objectives of the Workshop were the following: To meet with inspectors from other organisations, To exchange information regarding regulatory inspections practices, To discuss the major topics: plant modifications, event investigation, and operability decisions, To discuss current issues, To develop conclusions on the topics discussed. Six discussion

Conduct of inspections for plant modifications, event investigations and operability decisions. Proceedings of an International Workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

Preliminary planning started following the approval given by the CNRA. Formal planning for the Workshop was started at the Fifth Meeting of the WGIP in April 1993, in Lyon. Planning included taking into consideration comments made and lessons learned at the first Workshop. The first organising committee meeting for the Workshop was held in London preceding the Sixth WGIP meeting in October 1993. It was decided to remain with the same format: discussion groups with facilitators. It was also decided to have a three day programme with three Discussion Group sessions. The Announcement and Call for Participation was issued in December 1993. As part of the Announcement and Call for Participation, registrants were requested to transmit questions or issues of particular interest within the selected topics, they wanted to be addressed at the Workshop. A compilation of the these is included as Appendix H. Additionally, participants were requested to provide a short paper of one or two pages, describing the practices within their own countries related to the topics, for utilisation during the discussion sessions. These papers are attached as Appendix I. A training session was held for all facilitators on the afternoon of 22 May, to introduce methods in leading small group discussions and to complete final preparations. The Workshop programme (Appendix B) consisted of an opening plenary session, 3 discussion group sessions and a closing plenary session to review conclusions and an open question period. Following completion of the Workshop, facilitators met to evaluate and formulate final reports on the various topics. The main objectives of the Workshop were the following: To meet with inspectors from other organisations, To exchange information regarding regulatory inspections practices, To discuss the major topics: plant modifications, event investigation, and operability decisions, To discuss current issues, To develop conclusions on the topics discussed. Six discussion

Transparency, citizen participation, organisation and roles. Report from the third RISCOM-II Workshop

Energy Technology Data Exchange (ETDEWEB)

Andersson, Kjell [Karinta-Konsult, Taeby (Sweden); Paeivioe, Josefin [Swedish Nuclear Power Inspectorate, Stockholm (Sweden)

2003-10-01

This workshop was the final one in a series of three workshops within the RISCOM II project. It was an event where the RISCOM group of researchers disseminated the results to a wider circle of the nuclear waste management community in Europe with the focus on their own 'peers' in participating countries. However, the aim was not just to present RISCOM II results but also to see them in the context of adjacent projects. Especially, the workshop was set up in cooperation with the NEA Forum on Stakeholder Confidence (FSC) since this was seen as a good opportunity for exchange of experiences between the two activities. There was also participation by representatives from the EC COWAM Concerted Action and one presentation was devoted to this activity. There was thus an opportunity to discuss the three activities together. A draft of the RISCOM II Final Report had been made available for workshop participants before the meeting. The first part of the workshop entitled Transparency and citizen participation was moderated by Yves Le Bars, FSC chairman, and president of ANDRA. The second part dealt with Outcomes of the RISCOM Project and was moderated by Elizabeth Atherton from UK Nirex. Magnus Westerlind (SKI), the RISCOM-II coordinator, moderated the third part that dealt with Organisation and roles.

Workshop on technology issues of superconducting Maglev transportation systems

International Nuclear Information System (INIS)

Wegrzyn, J.E.; Shaw, D.T.

1991-01-01

There exists a critical need in the United States to improve its ground transportation system. One suggested system that offers many advantages over the current transportation infrastructure is Maglev. Maglev represents the latest evolution in very high and speed ground transportation, where vehicles are magnetically levitated, guided, and propelled over elevated guideways at speeds of 300 miles per hour. Maglev is not a new concept but is, however, receiving renewed interest. The objective of this workshop was to further promote these interest by bringing together a small group of specialists in Maglev technology to discuss Maglev research needs and to identify key research issues to the development of a successful Maglev system. The workshop was organized into four sessions based on the following technical areas: Materials, Testing, and Shielding; Magnet Design and Cryogenic Systems; Propulsion and Levitation Systems; and, System Control and Integration

Proceedings of the ICTSS 2012 PhD Workshop - Preface

DEFF Research Database (Denmark)

Nielsen, Brian; Weise, Carsten

2012-01-01

and their thesis work and receive constructive feedback from experts in the field as well as from peers. Also it is an opportunity for researchers to get an insight into new research topics in the field. Ph.D. students at any stage of their doctoral studies may participate. Seven abstracts were submitted......This technical report contains the proceedings of the Ph.D. Workshop held in conjunction with the The 24th IFIP Int. Conference on Testing Software and Systems (ICTSS'12) in Aalborg, Denmark, November 19, 2012. The well‐established ICTSS series of international conferences addresses the conceptual......, theoretic, and practical challenges of testing software systems, including communication protocols, services, distributed platforms, middleware, embedded systems, and security infrastructures. The aims of the ICTSS Doctoral Workshop is to provide a forum for PhD students to present preliminary results...

Proceedings of the workshop on the science of intense radioactive ion beams

International Nuclear Information System (INIS)

McClelland, J.B.; Vieira, D.J.

1990-10-01

This report contains the proceedings of a 2-1/2 day workshop on the Science of Intense Radioactive Ion Beams which was held at the Los Alamos National Laboratory on April 10--12, 1990. The workshop was attended by 105 people, representing 30 institutions from 10 countries. The thrust of the workshop was to develop the scientific opportunities which become possible with a new generation intense Radioactive Ion Beam (RIB) facility, currently being discussed within North America. The workshop was organized around five primary topics: (1) reaction physics; (2) nuclei far from stability/nuclear structure; (3) nuclear astrophysics; (4) atomic physics, material science, and applied research; and (5) facilities. Overview talks were presented on each of these topics, followed by 1-1/2 days of intense parallel working group sessions. The final half day of the workshop was devoted to the presentation and discussion of the working group summary reports, closing remarks and a discussion of future plans for this effort

Proceedings of the workshop on the science of intense radioactive ion beams

Energy Technology Data Exchange (ETDEWEB)

McClelland, J.B.; Vieira, D.J. (comps.)

1990-10-01

This report contains the proceedings of a 2-1/2 day workshop on the Science of Intense Radioactive Ion Beams which was held at the Los Alamos National Laboratory on April 10--12, 1990. The workshop was attended by 105 people, representing 30 institutions from 10 countries. The thrust of the workshop was to develop the scientific opportunities which become possible with a new generation intense Radioactive Ion Beam (RIB) facility, currently being discussed within North America. The workshop was organized around five primary topics: (1) reaction physics; (2) nuclei far from stability/nuclear structure; (3) nuclear astrophysics; (4) atomic physics, material science, and applied research; and (5) facilities. Overview talks were presented on each of these topics, followed by 1-1/2 days of intense parallel working group sessions. The final half day of the workshop was devoted to the presentation and discussion of the working group summary reports, closing remarks and a discussion of future plans for this effort.

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and System Technologies Business Objects Basic - 5-Nov-09 - 6-Nov-09 - French C++ Programming Part 1 - Hands-On Introduction - 26-Oct-09 - 28-Oct-09 - English CERN openlab Multi-threading and Parallelism Workshop - 11-Nov-09 - 12-Nov-09 - English CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09 - 7-Oct-09 - English Emacs - way beyond Text Editing\t29-Oct-09 - 29-Oct-09 - English Hands-On Object-Oriented and Generic Programming in C++ - 3-Nov-09 - 6-Nov-09 Intermediate Linux System Administration - 19-Nov-09 - 24-Nov-09 - English JAVA - Level 1\t12-Oct-09 - 14-Oct-09 - English JAVA - Level 2 - 16-Nov-09\t19-Nov-09 - English JAVA 2 Enterprise Edition - Part 1: Web Applications - 22-Oct-09 - 23-Oct-09 - English JCOP...

PREFACE: 22nd International Laser Physics Workshop (LPHYS'13)

Science.gov (United States)

Steering, LPHYS'13; Advisory; Committees, Program

2014-03-01

Dear Readers, The 22nd annual International Laser Physics Workshop, LPHYS'13, took place in the City of Prague, the Czech Republic. The conference gathered 387 participants from 34 countries. It was hosted by the Institute of Physics at the Academy of Sciences of the Czech Republic and the Czech Technical University in Prague. At this occasion, the LPHYS'13 Steering and the Advisory & Program Committees of the conference would like extend its sincere gratitude to Professor Miroslav Jelínek, Co-Chair and Head of the Local Organizing Committee and his team for the outstanding job performed on organizing, arranging, managing and putting in order the conference that lead to its successful resulting conclusion. As a result of scientific seminars at the Workshop, we would like to present to you the following conference proceedings published in this volume of the IOP Journal of Physics: Conference Series. Please be advised that the 23rd annual International Laser Physics Workshop (LPHYS'14) will take place from 14-18 July, 2014 in Sofia, Bulgaria, hosted by Institute of Electronics at the Bulgarian Academy of Sciences. LPHYS'13 Steering and Advisory & Program Committees

25th Annual International Laser Physics Workshop (LPHYS’16)

International Nuclear Information System (INIS)

2017-01-01

EDITORIALDear Readers,The 25th annual International Laser Physics Workshop, LPHYS’16, took place in the city of Yerevan, Republic of Armenia. 319 participants from 32 countries attended the conference. It was hosted by the Yerevan Physics Institute, A Alikhanyan National Laboratory. This year the conference has been endorsed by the Optical Society (OSA), the year the society celebrates its 100th anniversary.The LPHYS’16 Steering Committee and the Advisory and Program Committee would like to extend their sincere gratitude to Dr. Koryun B Oganesyan (Chair of the Local Organizing Committee) and to his team for the outstanding job performed on organizing, arranging, managing and putting in order the conference. Their combined effort lead to a successful result.In this volume of the IOP Journal of Physics: Conference Series you will find selected proceedings of the Workshop in Yerevan.Please make a note that the 26th annual International Laser Physics Workshop (LPHYS’17) will take place from July 17 to July 21, 2017 in the city of Kazan, Russia hosted by the Kazan E K Zavoisky Physical-Technical Institute (KPhTI).With kind regards,Steering and Advisory and Program committeesLPHYS’16 (paper)

78 FR 29239 - Final Priority; Technical Assistance To Improve State Data Capacity-National Technical Assistance...

Science.gov (United States)

2013-05-20

... Assistance To Improve State Data Capacity--National Technical Assistance Center To Improve State Capacity To... Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State... (FY) 2013 and later years. We take this action to focus attention on an identified national need to...