WorldWideScience

Sample records for work process pieces

  1. Optimization of Process Parameters During End Milling and Prediction of Work Piece Temperature Rise

    Directory of Open Access Journals (Sweden)

    Bhirud N.L.

    2017-09-01

    Full Text Available During the machining processes, heat gets generated as a result of plastic deformation of metal and friction along the tool–chip and tool–work piece interface. In materials having high thermal conductivity, like aluminium alloys, large amount of this heat is absorbed by the work piece. This results in the rise in the temperature of the work piece, which may lead to dimensional inaccuracies, surface damage and deformation. So, it is needed to control rise in the temperature of the work piece. This paper focuses on the measurement, analysis and prediction of work piece temperature rise during the dry end milling operation of Al 6063. The control factors used for experimentation were number of flutes, spindle speed, depth of cut and feed rate. The Taguchi method was employed for the planning of experimentation and L18 orthogonal array was selected. The temperature rise of the work piece was measured with the help of K-type thermocouple embedded in the work piece. Signal to noise (S/N ratio analysis was carried out using the lower-the-better quality characteristics. Depth of cut was identified as the most significant factor affecting the work piece temperature rise, followed by spindle speed. Analysis of variance (ANOVA was employed to find out the significant parameters affecting the work piece temperature rise. ANOVA results were found to be in line with the S/N ratio analysis. Regression analysis was used for developing empirical equation of temperature rise. The temperature rise of the work piece was calculated using the regression equation and was found to be in good agreement with the measured values. Finally, confirmation tests were carried out to verify the results obtained. From the confirmation test it was found that the Taguchi method is an effective method to determine optimised parameters for minimization of work piece temperature.

  2. Simulation of the Process of Simultaneous Finishing Batch of Work-pieces

    Directory of Open Access Journals (Sweden)

    N. G. Nazarov

    2015-01-01

    Full Text Available The paper analyzes different approaches to creating mathematical models to provide abrasive finishing. It highlights the features of abrasive finishing of precision parts at the final processing stages. The paper persuasively argues that it is necessary to take into consideration the law of size distribution in the batch of simultaneously treated work-pieces with double-sided lapping of precision plane-parallel and cylindrical parts, such as end bars and cylinders for measuring the pitch diameter. The paper also proposes geometric models of the batch of simultaneously treated work-pieces for plane-parallel and cylindrical parts when lapping them in a double-disk lapping machine as a "general work-piece". On the basis of geometrical models an expression is created to calculate the change of a working pressure or the distributed load (for cylindrical parts in the process of abrasive finishing. The paper presents the experimental study results of changing geometrical dimensions in the batch of work-pieces of the end measures of length in abrasive process thereby confirming the validity of the proposed approach to creating model. There is a justification that in the mathematical model should be introduced expressions describing the change of abrasiveness of the abrasive used for different kinds of lapping, including that of applied to the final lapping. A mathematical model is presented in the form of integrodifferential equations describing how the rate of linear material removal in double-sided finishing depends on the speed of relative movement of the work-pieces on the lap (sanding block, as well as on the pressure or distributed load (for cylindrical parts, and acceleration of relative motion, with appropriate exponents. The expression taking into account the change of the abrasiveness of the abrasive used is introduced in the differential equation. The model is presented in a generalized form, taking into account all possible processing

  3. Numerical Simulation of a Grinding Process for the Spatial Work-pieces: Modeling of Grinding Forces and System Dynamics

    Directory of Open Access Journals (Sweden)

    I. A. Kiselev

    2015-01-01

    Full Text Available The paper describes a computation-experimental technique to determine model coefficients of grinding forces using a Nelder-Mead algorithm. As an error function, the paper offers a deviation measure of calculating and experimental grinding forces averaged for a single-pass of the grinding wheel. As an example of cutting forces model coefficients calculation for linear model, in which the grinding forces depend on uncut chip thickness is analyzed. The coefficients vary on abrasive grain geometric parameters and are determined applying the authors-developed method based on Nelder-Mead technique. The measured forces while plane grinding of test work-piece are used to determine the coefficients. Model coefficients are identified if compare the measured data with the results of modeling for grinding by tool with the uniformly distributed abrasive grains with the triangular shape of cutting edge.Grinding dynamics simulation applying the determined coefficients was carried out for the processing of cantilever plane work-piece as a test example. The work-piece was processed by grinding wheel transverse passages made at different distances from the fixation. A selfoscillating process accompanied by vibration of high level was observed for some selected technological parameters of grinding. The simulation has shown qualitative and quantitative compliance with the experiment. It was shown that the intensity of the self-oscillating process arising during the processing depends on the work-piece rigidity and cutting conditions. The results of modeling can be applied in practice in developing the technology process of grinding the spatial work-pieces.

  4. Numerical Simulation of a Grinding Process Model for the Spatial Work-pieces: Development of Modeling Techniques

    Directory of Open Access Journals (Sweden)

    S. A. Voronov

    2015-01-01

    Full Text Available The article presents a literature review in simulation of grinding processes. It takes into consideration the statistical, energy based, and imitation approaches to simulation of grinding forces. Main stages of interaction between abrasive grains and machined surface are shown. The article describes main approaches to the geometry modeling of forming new surfaces when grinding. The review of approaches to the chip and pile up effect numerical modeling is shown. Advantages and disadvantages of grain-to-surface interaction by means of finite element method and molecular dynamics method are considered. The article points out that it is necessary to take into consideration the system dynamics and its effect on the finished surface. Structure of the complex imitation model of grinding process dynamics for flexible work-pieces with spatial surface geometry is proposed from the literature review. The proposed model of spatial grinding includes the model of work-piece dynamics, model of grinding wheel dynamics, phenomenological model of grinding forces based on 3D geometry modeling algorithm. Model gives the following results for spatial grinding process: vibration of machining part and grinding wheel, machined surface geometry, static deflection of the surface and grinding forces under various cutting conditions.

  5. Pieces

    DEFF Research Database (Denmark)

    Jensen, Niels Henrik

    1990-01-01

    The report presents results from the SIP project (System Representation in Process Control). PIECES is a graphical, interactive user interface system designed and programmed as a tool for building, manipulating and using a Multilevel Flow Model (MFM - Morten Lind, Tecnical University of Denmark...... between model and plant are  established, and the restructured plant is ready to be used. This report is 1 of 2. Report 1: Design of PIECES. Report 2: Programming of PIECES....

  6. Selection of Levels of Dressing Process Parameters by Using TOPSIS Technique for Surface Roughness of En-31 Work piece in CNC Cylindrical Grinding Machine

    Science.gov (United States)

    Patil, Sanjay S.; Bhalerao, Yogesh J.

    2017-02-01

    Grinding is metal cutting process used for mainly finishing the automobile components. The grinding wheel performance becomes dull by using it most of times. So it should be reshaping for consistent performance. It is necessary to remove dull grains of grinding wheel which is known as dressing process. The surface finish produced on the work piece is dependent on the dressing parameters in sub-sequent grinding operation. Multi-point diamond dresser has four important parameters such as the dressing cross feed rate, dressing depth of cut, width of the diamond dresser and drag angle of the dresser. The range of cross feed rate level is from 80-100 mm/min, depth of cut varies from 10 - 30 micron, width of diamond dresser is from 0.8 - 1.10mm and drag angle is from 40o - 500, The relative closeness to ideal levels of dressing parameters are found for surface finish produced on the En-31 work piece during sub-sequent grinding operation by using Technique of Order Preference by Similarity to Ideal Solution (TOPSIS).In the present work, closeness to ideal solution i.e. levels of dressing parameters are found for Computer Numerical Control (CNC) cylindrical angular grinding machine. After the TOPSIS technique, it is found that the value of Level I is 0.9738 which gives better surface finish on the En-31 work piece in sub-sequent grinding operation which helps the user to select the correct levels (combinations) of dressing parameters.

  7. 29 CFR 530.202 - Piece rates-work measurement.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Piece rates-work measurement. 530.202 Section 530.202 Labor... Piece rates—work measurement. (a) No certificate will be issued pursuant to § 530.101 of subpart B to an employer who pays homeworkers based on piece rates unless the employer establishes the piece rates for the...

  8. Surface dimpling on rotating work piece using rotation cutting tool

    Science.gov (United States)

    Bhapkar, Rohit Arun; Larsen, Eric Richard

    2015-03-31

    A combined method of machining and applying a surface texture to a work piece and a tool assembly that is capable of machining and applying a surface texture to a work piece are disclosed. The disclosed method includes machining portions of an outer or inner surface of a work piece. The method also includes rotating the work piece in front of a rotating cutting tool and engaging the outer surface of the work piece with the rotating cutting tool to cut dimples in the outer surface of the work piece. The disclosed tool assembly includes a rotating cutting tool coupled to an end of a rotational machining device, such as a lathe. The same tool assembly can be used to both machine the work piece and apply a surface texture to the work piece without unloading the work piece from the tool assembly.

  9. Pieces

    DEFF Research Database (Denmark)

    Jensen, Henrik

    1990-01-01

    The report presents results from the SIP project (System Representation in Process Control). PIECES is a graphical, interactive user interface system designed and programmed as a tool for building, manipulating and using a Multilevel Flow Model (MFM - Morten Lind, Tecnical University of Denmark...

  10. OBJECT ORIENTED SOFTWARE FOR MICRO WORK PIECE RECOGNITION IN MICROASSEMBLY

    Directory of Open Access Journals (Sweden)

    Toledo-Ramírez, G.K.

    2006-04-01

    Full Text Available The aim of this article is to describe object oriented software for the automatic micro work piece handling system.The general task of this system is the recognition of work pieces with neural classifier and detection of theirpositions. Other important functions of the system are work piece styles database administration, work piecedatabase administration for neural classifier training and testing, neural classifier interface between database, userand work piece finder. The software is object oriented and widely commented, that makes its modification,adaptation and improvement easier. Most of the software modules can be used in other research projects. Thesoftware was tested on image database. The results of experiments prove its effectiveness in chosen task.

  11. Managed land settlement process: "Thought piece" on basic services

    CSIR Research Space (South Africa)

    Wall, K

    2009-12-01

    Full Text Available This thought piece is deliberately about issues and principles, rather than about setting out a step-by-step process for the planning and provision of services. What is important - and needs to be fully understood - are these issues and principles...

  12. Accuracy of Setting Work-pieces on Automatic Lines with Pallet-fixtures

    Directory of Open Access Journals (Sweden)

    L. A. Kolesnikov

    2015-01-01

    Full Text Available The accuracy of positioning surfaces to be processed on automatic lines with pallet-fixtures essentially depends on the setting error of the pallet-fixtures with work-pieces in ready-to-work position.The applied methods for calculating the setting error do not give a complete picture of the possible coordinates of the point when in the pallet is displaced in different directions.The aim of the work was to determine an accuracy of the setting work-pieces on automatic lines with pallets-fixtures, using a computational and analytical method, to improve a manufacturing precision of parts.The currently used methods to calculate the setting error do not give a complete picture of the possible coordinates of the point of the pallet displacement in different directions. The paper offers a method of equivalent mechanism to determine all the variety of options for displacements in the horizontal plane with a diverse combination of angular and plane-parallel displacements.Using a four-bar linkage, as an equivalent mechanism, allows us to define a zone of the possible positions of any point of the work-piece pallet platform, as the zone bounded by the coupler curve. In case the gaps in the nodes of the two fixtures are equal the zone of possible positions of the point in the parallel displacement of the platform is determined by the circumference and at an angular displacement by the ellipse.The obtained analytical dependences allow us to determine the error at the stage of design with the certain gaps in the fixture nodes.The above method of calculation makes it possible to define a zone of the appropriate placement of the work-piece on its platform for the specified parameters of the pallet to meet conditions for ensuring the coordinate accuracy of the processed axes of holes.

  13. The “Liberty” of Work and the Traps of Piece Work

    Directory of Open Access Journals (Sweden)

    Maria Augusta Tavares

    2009-01-01

    Full Text Available This article analyzes the relations of production in the sugarcane industry, identifying pay for piece work as a mechanism used by capital to intensify the productive capacity of workers and increase exploitation. The paper demonstrates that this form of pay, which is adjusted to flexible accumulation, far from guaranteeing the autonomy and liberty promised, reduces the time of socially necessary work, and therefore the value of the work force. The analysis uses Marxist economic categories to make clear that the labor protection laws do not resist the determinations of capital. The paper thus intends to reveal the inadequacy of policies in relation to the social question as a whole.

  14. [Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

    Science.gov (United States)

    Xiao, Yong-Qing; Li, Li; Liu, Ying; Ma, Yin-Lian; Yu, Ding-Rong

    2016-01-01

    To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance. Copyright© by the Chinese Pharmaceutical Association.

  15. Specific Features of Chip Making and Work-piece Surface Layer Formation in Machining Thermal Coatings

    Directory of Open Access Journals (Sweden)

    V. M. Yaroslavtsev

    2016-01-01

    of chip element formation are cycled. Fluctuations of the cutting force components completely repeat all the stages of local destruction and formation of individual chip elements. Studies have shown that with increased thickness of the cut-off layer the main crack develops below the cut-off line thus significantly affecting the quality of the machined surface: emerging cracks, cavities, chips, and other defects that significantly reduce the product performance.In machining the plasma-sprayed coatings, their high tendency to strengthening and rehardening because of the cutting action has a great impact on the surface quality. This is evident as a loss of the elastic equilibrium state stability and as a destruction of the work-piece surface layer (chipping, peeling, flaking. With increasing curvature of the machined surface (e.g., decreasing radius of cylindrical billet the surface layer is increasingly prone to destruction.Specific problems are cutting fluids used in grinding the plasma-sprayed coatings. Machining in this case comes with saturated liquid vapours formed in the surface layer of a billet under high pressure. With a pressure drop on the tool-side in cutting there is such an intensity of vaporization that micro- and macro-fractures of the machined work-piece surface can be initiated.

  16. OPTIMIZING THE PLACEMENT OF A WORK-PIECE AT A MULTI-POSITION ROTARY TABLE OF TRANSFER MACHINE WITH VERTICAL MULTI-SPINDLE HEAD

    Directory of Open Access Journals (Sweden)

    N. N. Guschinski

    2015-01-01

    Full Text Available The problem of minimizing the weight of transfer machine with a multi-position rotary table by placing of a work-piece at the table for processing of homogeneous batch of work-pieces is considered. To solve this problem the mathematical model and heuristic particle swarm optimization algorithm are proposed. The results of numerical experiments for two real problems of this type are given. The experiments revealed that the particle swarm optimization algorithm is more effective for the solution of the problem compared to the methods of random search and LP-search.

  17. Learning and Memory Processes Following Cochlear Implantation:The Missing Piece of the Puzzle

    Directory of Open Access Journals (Sweden)

    David B. Pisoni

    2016-04-01

    Full Text Available At the present time, there is no question that cochlear implants work and often work very well in quiet listening conditions for many profoundly deaf children and adults. The speech and language outcomes data published over the last two decades document quite extensively the clinically significant benefits of cochlear implants. Although there now is a large body of evidence supporting the efficacy of cochlear implants as a medical intervention for profound hearing loss in both children and adults, there still remain a number of challenging unresolved clinical and theoretical issues that deal with the effectiveness of cochlear implants in individual patients that have not yet been successfully resolved. In this paper, we review recent findings on learning and memory, two central topics in the field of cognition that have been seriously neglected in research on cochlear implants. Our research findings on sequence learning, memory and organization processes, and retrieval strategies used in verbal learning and memory of categorized word lists suggests that basic domain-general learning abilities may be the missing piece of the puzzle in terms of understanding the cognitive factors that underlie the enormous individual differences and variability routinely observed in speech and language outcomes following cochlear implantation.

  18. MATHEMATICAL DESCRIPTION OF TWO-DIMENSIONAL PERIODIC CIRCULAR MOVEMENT OF WORK-PIECE BEING TURNED IN MODERNIZED SAWING UNIT

    Directory of Open Access Journals (Sweden)

    M. G. Kiselev

    2013-01-01

    Full Text Available The paper presents a theoretical investigation on nature of two-dimensional periodic circular movement of a work-piece attached to the end of a modernized sawing unit boom.  The boom oscillation axis is established on an elastic suspension that makes forced oscillations along a horizontal axis. The paper provides a calculation model of an oscillatory system of a boom swing block for mathematical description of the point movement trajectory that belongs to the work-piece. The model permits to obtain a system of two connected equations describing this movement. Numerical solution of these equations permits to establish that the work-piece makes a two-dimensional periodic circular movement and it has an elliptical  trajectory. The paper gives data that reveal influence of elastic and inertial and dissipative characteristics of the oscillatory system on the elliptical trajectory parameters of the work-piece movement. The paper demonstrates  that the regulation of the forced oscillation frequency transferred to the boom swing block of the sawing unit is considered as. the simplest in realization and the most efficient method that makes it possible to control the required parameters.

  19. Technological practicability of the numerical modeling of induction heating process in steel pieces

    Energy Technology Data Exchange (ETDEWEB)

    Iagar, A.; Sora, I.; Radu, D.; Panoiu, C.; Abrudean, C.

    2009-07-01

    This paper presents the numerical modeling (using the Finite Difference Method-FDM, and Finite Element Method- FEM) of the electromagnetic and thermal fields in a steel piece heated up inside an induction crucible furnace, and the experimental validations. Both modeling have been validated experimentally, so they can be used in designing the equipment and in the numerical control of induction heating process. The program based on FDM can be used in the first stage of designing due to the reduced CPU time. In this stage the inductor parameters and heating time can be estimated, and a study of the influence of diverse factors upon the heating process can be achieved. The FLUX 2D program can be used in the optimization stage, because it allows a more thorough analysis of the phenomena. (Author) 29 refs.

  20. Early auditory processing in musicians and dancers during a contemporary dance piece.

    Science.gov (United States)

    Poikonen, Hanna; Toiviainen, Petri; Tervaniemi, Mari

    2016-09-09

    The neural responses to simple tones and short sound sequences have been studied extensively. However, in reality the sounds surrounding us are spectrally and temporally complex, dynamic and overlapping. Thus, research using natural sounds is crucial in understanding the operation of the brain in its natural environment. Music is an excellent example of natural stimulation which, in addition to sensory responses, elicits vast cognitive and emotional processes in the brain. Here we show that the preattentive P50 response evoked by rapid increases in timbral brightness during continuous music is enhanced in dancers when compared to musicians and laymen. In dance, fast changes in brightness are often emphasized with a significant change in movement. In addition, the auditory N100 and P200 responses are suppressed and sped up in dancers, musicians and laymen when music is accompanied with a dance choreography. These results were obtained with a novel event-related potential (ERP) method for natural music. They suggest that we can begin studying the brain with long pieces of natural music using the ERP method of electroencephalography (EEG) as has already been done with functional magnetic resonance (fMRI), these two brain imaging methods complementing each other.

  1. think Piece

    African Journals Online (AJOL)

    Research methodology is significantly political and in this think piece I try to better understand the effect of this politicisation in the production of science. The main focus of the think piece is to identify the dominant methodological discourses and analyse them using techniques borrowed from post-structuralism. From this.

  2. School-to-Work and Service Learning. A "Links" Piece, Connecting Theory and Practice.

    Science.gov (United States)

    Hengel, Madeleine S.; Shumer, Robert

    This document is a brief review of resources and readings on Service-Learning and School-to-Work. Service-Learning (SL) and School-to-Work (STW) both extend learning beyond the classroom into real world contexts where broader problem-solving and decision-making skills are addressed. While SL provides opportunities within the community for students…

  3. Technological practicability of the numericalmodeling of induction heating process in steel pieces

    Directory of Open Access Journals (Sweden)

    Iagar, A.

    2009-02-01

    Full Text Available This paper presents the numerical modeling (using the Finite Difference Method-FDM, and Finite Element Method- FEM of the electromagnetic and thermal fields in a steel piece heated up inside an induction crucible furnace, and the experimental validations. Both modelings have been validated experimentally, so they can be used in designing the equipments and in the numerical control of induction heating process. The program based on FDM can be used in the first stage of designing due to the reduced CPU time. In this stage the inductor parameters and heating time can be estimated, and a study of the influence of diverse factors upon the heating process can be achieved. The FLUX 2D program can be used in the optimization stage, because it allows a more thorough analysis of the phenomena.

    El trabajo presenta el modelado numérico (con el Método de la Diferencias Finitas-FDM y el Método de los Elementos Finitos-FEM, de los campos electromagnéticos y térmicos de una pieza de acero calentada en un horno de inducción con crisol y las validaciones experimentales. Los dos modelados siendo válidos desde el punto de vista experimental, se pueden utilizar para la proyección de unos equipos y por el control numérico del proceso de calentamiento por inducción. El programa basado en FDM se puede utilizar en la primera etapa de la proyección, gracias al tiempo corto de rodadura. En esta etapa se pueden estimar los parámetros del inductor, el tiempo de calentamiento y se puede realizar un estudio de la influencia que tienen los distintos factores sobre el proceso de calentamiento. El programa FLUX 2D se puede utilizar en la etapa de optimización, porque permite un análisis más detallado de los fenómenos.

  4. Specific Features of Chip Making and Work-piece Surface Layer Formation in Machining Thermal Coatings

    OpenAIRE

    V. M. Yaroslavtsev

    2016-01-01

    A wide range of unique engineering structural and performance properties inherent in metallic composites characterizes wear- and erosion-resistant high-temperature coatings made by thermal spraying methods. This allows their use both in manufacturing processes to enhance the wear strength of products, which have to operate under the cyclic loading, high contact pressures, corrosion and high temperatures and in product renewal.Thermal coatings contribute to the qualitative improvement of the t...

  5. Welding Current Distribution in the Work-piece and Pool in Arc Welding

    Directory of Open Access Journals (Sweden)

    A. M. Rybachuk

    2015-01-01

    Full Text Available In order to select the optimal configuration of controlling magnetic fields and build rational construction of magnetic systems, we need to know the distribution of welding current in the molten metal of the weld pool. So the objective of the work is to establish the calculated methods for determining current density in the weld pool during arc welding. The distribution of welding current in the pool depends on the field of the electrical resistance, which is determined by the deformed temperature field while arc moves with the welding speed. The previous works have shown experimentally and by simulation on the conductive paper that deformation of temperature field defines deformation of electric field. On the basis thereof, under certain boundary conditions the problem has been solved to give a general solution of differential equation, which relates the potential distribution to the temperature in the product during arc welding. This solution is obtained under the following boundary conditions: 1 metal is homogeneous; 2 input and output surfaces of heat flux and electric current coincide; 3 input and output surfaces of heat flux and electric current are insulated and equipotential; 4 other (lateral surfaces are adiabatic boundaries. Therefore, this paper pays basic attention to obtaining the analytical solution of a general differential equation, which relates distribution of potential to the temperature in the product. It considers the temperature field of the heat source, which moves at a welding speed with normal-circular distribution of the heat flow at a certain concentration factor. The distribution of current density is calculated on the assumption that the welding current is introduced through the same surface as the heat flux and the distribution of current density corresponds to the normally circular at a certain concentration factor. As a result, we get an expression that allows us to calculate the current density from the known

  6. think Piece

    African Journals Online (AJOL)

    the Southern African Journal of Environmental Education (SAJEE) in 2008, and are again reported on in this edition of the SAJEE), but the programme also involved theoretical engagement with the concept of educational quality and relevance. This think piece helps to make some of this thinking and theoretical deliberation ...

  7. 'The missing piece' in the educational process: Social and emotional learning

    Directory of Open Access Journals (Sweden)

    Tošić-Radev Milica N.

    2017-01-01

    Full Text Available A syllabus focused solely on cognitive content and processes cannot meet the needs of the individual and of contemporary society. This paper looks in detail at the concept of social and emotional learning, which can no longer be neglected or overlooked in the education of either students or teachers. Social and emotional learning involves a comprehensive approach that emphasizes the development and utilization of social and emotional competences necessary not only for high academic achievement but also for success in life. In addition to a number of positive outcomes, such as improved self-image, improved prosocial behavior, and a lower incidence of problematic and risky behaviors, the findings also suggest a strong link between social and emotional skills and academic achievement. Yet in the course of their initial education and professional development, teachers rarely receive training in the social and emotional aspects of their work, which is particularly regrettable considering the numerous positive outcomes of these programs, as well as findings that indicate that teachers' emotional intelligence can be improved and that programs geared towards this yield excellent results. In sum, teaching that is effective both academically, on the one hand, and socially and emotionally, on the other, can be achieved through the well-planned professional development of teaching staff, while the introduction of emotional and social aspects into the syllabus is essential if we are seeking to resolve some of the pressing problems of the education system.

  8. Sigtuna Think Piece 5

    African Journals Online (AJOL)

    ... 1970/1996). Rather, our work has been inspired by the philosophical method he used in his later works, i.e. his way of investigating 'ethical'. Sigtuna Think Piece 5. Climate Change within. Education for Sustainable Development: Ethical Tendency Discourse Analysis as a Tool. Leif Östman, Uppsala University, Sweden ...

  9. Investigation of holder pressure and size effects in micro deep drawing of rectangular work pieces driven by piezoelectric actuator.

    Science.gov (United States)

    Aminzahed, Iman; Mashhadi, Mahmoud Mosavi; Sereshk, Mohammad Reza Vaziri

    2017-02-01

    Micro forming is a manufacturing process to fabricate micro parts with high quality and a cost effective manner. Deep drawing could be a favorable method for production of complicated parts in macro and micro sizes. In this paper piezoelectric actuator is used as a novel approach in the field of micro manufacturing. Also, in current work, investigations are conducted with four rectangular punches and blanks with various thicknesses. Blank holder pressure effects on thickness distributions, punch force, and springback are studied. According to the results of this work, increasing of blank holder pressure in scaled deep drawing, in contrast to thickness of drawn part, leads to decrease in the punch forces and springback. Furthermore, it is shown that in micro deep drawing, the effects of holder pressure on mentioned parameters can be ignored. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Piecing Together the Puzzle of Graduate Employment: Factors that Shape the Graduate Work Expectations of Human Resource Management Students

    Science.gov (United States)

    Parris, Melissa A.; Saville, Kerrie

    2011-01-01

    Providing graduates with a set of skills and attributes relevant to their future employment remains a key topic in both higher education policy and research. This paper reports findings from a pilot study of human resource management (HRM) students' perceptions of the graduate work experience. Specifically, it focuses on how these perceptions are…

  11. Seeing How Fitting Process Works

    CERN Document Server

    Montalbano, Vera

    2016-01-01

    A common problem in teaching Physics in secondary school is due to the gap in terms of difficulty between the physical concepts and the mathematical tools which are necessary to study them quantitatively. Advanced statistical estimators are commonly introduced only a couple of years later than some common physical topics, such as e.g. the electronic circuit analysis. Filling this gap with alternative methods appears to be opportune, in order to let the students reach a full comprehension of the issue they are facing with. In this work we use a smartphone camera and GeoGebra to propose a visual method for understanding the physical meaning of a fitting process. The time constant of an RC circuit is estimated by fitting the discharge curve of a capacitor visualized on the screen of an oscilloscope.

  12. Composition: 3 Piano Pieces

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2017-01-01

    3 Piano Pieces is a collection of open composition to be realised by an improvising pianist. See more about my composition practise in the entry "Composition - General Introduction".......3 Piano Pieces is a collection of open composition to be realised by an improvising pianist. See more about my composition practise in the entry "Composition - General Introduction"....

  13. The Process of Identity Work: Negotiating a Work Identity

    NARCIS (Netherlands)

    Crafford, A.; Adams, B.G.; Saayman, T.; Vinkenburg, C.J.; Jansen, P.G.W.; Roodt, G.

    2015-01-01

    Identity work is an important process in negotiating, regulating and maintaining a coherent sense of self-(identity). In this chapter we discuss how identity work is particularly useful in establishing a work identity. The crux of the discussion in this chapter is based on the qualitative phase of

  14. Appearance and overall acceptability of fresh-cut cantaloupe pieces from whole melon treated with wet steam process

    Science.gov (United States)

    Minimally processed fresh-cut fruits have a limited shelf-life because of deterioration caused by spoilage microflora and changes in physiological processes. Whole melons were inoculated with 7 log CFU/ml of each bacterium (Salmonella, Escherichia coli O157:H7 and Listeria monocytogenes) and then t...

  15. Leaf processing behaviour in Atta leafcutter ants: 90% of leaf cutting takes place inside the nest, and ants select pieces that require less cutting.

    Science.gov (United States)

    Garrett, Ryan W; Carlson, Katherine A; Goggans, Matthew Scott; Nesson, Michael H; Shepard, Christopher A; Schofield, Robert M S

    2016-01-01

    Leafcutter ants cut trimmings from plants, carry them to their underground nests and cut them into smaller pieces before inoculating them with a fungus that serves as a primary food source for the colony. Cutting is energetically costly, so the amount of cutting is important in understanding foraging energetics. Estimates of the cutting density, metres of cutting per square metre of leaf, were made from samples of transported leaf cuttings and of fungal substrate from field colonies of Atta cephalotes and Atta colombica. To investigate cutting inside the nest, we made leaf-processing observations of our laboratory colony, A. cephalotes. We did not observe the commonly reported reduction of the leaf fragments into a pulp, which would greatly increase the energy cost of processing. Video clips of processing behaviours, including behaviours that have not previously been described, are linked. An estimated 2.9 (±0.3) km of cutting with mandibles was required to reduce a square metre of leaf to fungal substrate. Only about 12% (±1%) of this cutting took place outside of the nest. The cutting density and energy cost is lower for leaf material with higher ratios of perimeter to area, so we tested for, and found that the laboratory ants had a preference for leaves that were pre-cut into smaller pieces. Estimates suggest that the energy required to transport and cut up the leaf material is comparable to the metabolic energy available from the fungus grown on the leaves, and so conservation of energy is likely to be a particularly strong selective pressure for leafcutter ants.

  16. The minimum work requirement for distillation processes

    Energy Technology Data Exchange (ETDEWEB)

    Yunus, Cerci; Yunus, A. Cengel; Byard, Wood [Nevada Univ., Las Vegas, NV (United States). Dept. of Mechanical Engineering

    2000-07-01

    A typical ideal distillation process is proposed and analyzed using the first and second-laws of thermodynamics with particular attention to the minimum work requirement for individual processes. The distillation process consists of an evaporator, a condenser, a heat exchanger, and a number of heaters and coolers. Several Carnot engines are also employed to perform heat interactions of the distillation process with the surroundings and determine the minimum work requirement for processes. The Carnot engines give the maximum possible work output or the minimum work input associated with the processes, and therefore the net result of these inputs and outputs leads to the minimum work requirement for the entire distillation process. It is shown that the minimum work relation for the distillation process is the same as the minimum work input relation found by Cerci et al [1] for an incomplete separation of incoming saline water, and depends only on the properties of the incoming saline water and the outgoing pure water and brine. Also, certain aspects of the minimum work relation found are discussed briefly. (authors)

  17. WRAP process area development control work plan

    Energy Technology Data Exchange (ETDEWEB)

    Leist, K.L., Fluor Daniel Hanford

    1997-02-27

    This work plan defines the manner in which the Waste Receiving and Processing Facility, Module I Process Area will be maintained under development control status. This status permits resolution of identified design discrepancies, control system changes, as-building of equipment, and perform modifications to increase process operability and maintainability as parallel efforts. This work plan maintains configuration control as these efforts are undertaken. This task will end with system testing and reissue of field verified design drawings.

  18. Sigtuna Think Piece 7

    African Journals Online (AJOL)

    This think piece elaborates possible research connections between ecocriticism and climate change educational ... transactional theory of reading in the context of ecocriticism and suggests a few possible climate change .... remain as the residue after the reading – the information to be acquired, the logical solution to.

  19. Aging and Productivity - Evidence from Piece Rates

    OpenAIRE

    Pekkarinen, Tuomas; Uusitalo, Roope

    2012-01-01

    We evaluate the effects of aging on productivity using piece-rate earnings as a proxy for worker output. Our data contain the population of Finnish blue collar workers in 61 different industries during 1990-2002. A unique feature of the data is that we can observe the exact hours worked on piece rates and on fixed time rates as well as earnings under both performance schemes. We account for the selection into piece rates by using firm-level changes in pay systems as instruments for the probab...

  20. [Work processes in Family Health Strategy team].

    Science.gov (United States)

    Pavoni, Daniela Soccoloski; Medeiros, Cássia Regina Gotler

    2009-01-01

    The Family Health Strategy requires a redefinition of the health care model, characterized by interdisciplinary team work. This study is aimed at knowiong the work processes in a Family Health Team. The research was qualitative, and 10 team members were interviewed. Results demonstrated that the nurse performs a variety of functions that could be shared with other people; this overloads him/her and makes inherent job task execution difficult. Task planning and performing are usually done in teams, but some professionals get more involved in these activities. It was concluded that there is a need for the team to reflect upon work process as well as reassess task assignment, so that each individual is able to perform the work and contribute for an integrated work.

  1. [Development of Fuzi precision decoction pieces (PDP) (I): Specification and quality uniformity].

    Science.gov (United States)

    Zhang, Ding-kun; Han, Xue; Zhou, Yong-feng; Tan, Peng; Yang, Ming; Peng, Cheng; Wang, Jia-bo; Xiao, Xiao-he

    2015-09-01

    The specification of decoction pieces and quality uniformity are the important factors to influence the efficacy of clinical medicine. Considering the deficiency of diversity, poor quality uniformity and confusion of decoction pieces specifications, we first propose a new idea of precision decoction pieces (PDP) based on clinical demands and fresh-processed technology. In order to explain the idea, a study case of aconite SUP is provided, including the optimized specification design, processing technology, extraction effects, quality uniformity, and toxic and efficacy variation and so on. The results showed that preparing 5 mm PDP by fresh-cutting is rather simple and practicable, with high efficiency and large yield; then, this technology could significantly decrease the ingredients loss and increase the efficacy components; moreover, it was helpful for achieving the quality uniformity and best extraction effects. This work revealed the quality superiority of PDP, and provided a good strategy and example for the standard of decoction pieces specification and modernization of processing technology.

  2. The minimal work cost of information processing

    Science.gov (United States)

    Faist, Philippe; Dupuis, Frédéric; Oppenheim, Jonathan; Renner, Renato

    2015-07-01

    Irreversible information processing cannot be carried out without some inevitable thermodynamical work cost. This fundamental restriction, known as Landauer's principle, is increasingly relevant today, as the energy dissipation of computing devices impedes the development of their performance. Here we determine the minimal work required to carry out any logical process, for instance a computation. It is given by the entropy of the discarded information conditional to the output of the computation. Our formula takes precisely into account the statistically fluctuating work requirement of the logical process. It enables the explicit calculation of practical scenarios, such as computational circuits or quantum measurements. On the conceptual level, our result gives a precise and operational connection between thermodynamic and information entropy, and explains the emergence of the entropy state function in macroscopic thermodynamics.

  3. Piece of the sun

    CERN Document Server

    Wayne, Teddy

    2015-01-01

    Our rapidly industrialising world has an insatiable hunger for energy, and conventional sources are struggling to meet demand. Oil is running out, coal is damaging our climate, many nations are abandoning nuclear, yet solar, wind and water will never be a complete replacement. The solution, says Daniel Clery in this deeply researched and revelatory book, is to be found in the original energy source: the Sun itself. There, at its centre, the fusion of 630 million tonnes of hydrogen every second generates an unfathomable amount of energy. By replicating even a tiny piece of the Sun's power

  4. ExMC Work Prioritization Process

    Science.gov (United States)

    Simon, Matthew

    2015-01-01

    Last year, NASA's Human Research Program (HRP) introduced the concept of a "Path to Risk Reduction" (PRR), which will provide a roadmap that shows how the work being done within each HRP element can be mapped to reducing or closing exploration risks. Efforts are currently underway within the Exploration Medical Capability (ExMC) Element to develop a structured, repeatable process for prioritizing work utilizing decision analysis techniques and risk estimation tools. The goal of this effort is to ensure that the work done within the element maximizes risk reduction for future exploration missions in a quantifiable way and better aligns with the intent and content of the Path to Risk Reduction. The Integrated Medical Model (IMM) will be used to identify those conditions that are major contributors of medical risk for a given design reference mission. For each of these conditions, potential prevention, screening, diagnosis, and treatment methods will be identified. ExMC will then aim to prioritize its potential investments in these mitigation methods based upon their potential for risk reduction and other factors such as vehicle performance impacts, near term schedule needs, duplication with external efforts, and cost. This presentation will describe the process developed to perform this prioritization and inform investment discussions in future element planning efforts. It will also provide an overview of the required input information, types of process participants, figures of merit, and the expected outputs of the process.

  5. Supramodal parametric working memory processing in humans.

    Science.gov (United States)

    Spitzer, Bernhard; Blankenburg, Felix

    2012-03-07

    Previous studies of delayed-match-to-sample (DMTS) frequency discrimination in animals and humans have succeeded in delineating the neural signature of frequency processing in somatosensory working memory (WM). During retention of vibrotactile frequencies, stimulus-dependent single-cell and population activity in prefrontal cortex was found to reflect the task-relevant memory content, whereas increases in occipital alpha activity signaled the disengagement of areas not relevant for the tactile task. Here, we recorded EEG from human participants to determine the extent to which these mechanisms can be generalized to frequency retention in the visual and auditory domains. Subjects performed analogous variants of a DMTS frequency discrimination task, with the frequency information presented either visually, auditorily, or by vibrotactile stimulation. Examining oscillatory EEG activity during frequency retention, we found characteristic topographical distributions of alpha power over visual, auditory, and somatosensory cortices, indicating systematic patterns of inhibition and engagement of early sensory areas, depending on stimulus modality. The task-relevant frequency information, in contrast, was found to be represented in right prefrontal cortex, independent of presentation mode. In each of the three modality conditions, parametric modulations of prefrontal upper beta activity (20-30 Hz) emerged, in a very similar manner as recently found in vibrotactile tasks. Together, the findings corroborate a view of parametric WM as supramodal internal scaling of abstract quantity information and suggest strong relevance of previous evidence from vibrotactile work for a more general framework of quantity processing in human working memory.

  6. Practical Challenge of Shredded Documents: Clustering of Chinese Homologous Pieces

    Directory of Open Access Journals (Sweden)

    Nan Xing

    2017-09-01

    Full Text Available When recovering a shredded document that has numerous mixed pieces, the difficulty of the recovery process can be reduced by clustering, which is a method of grouping pieces that originally belonged to the same page. Restoring homologous shredded documents (pieces from different pages of the same file is a frequent problem, and because these pieces have nearly indistinguishable visual characteristics, grouping them is extremely difficult. Clustering research has important practical significance for document recovery because homologous pieces are ubiquitous. Because of the wide usage of Chinese and the huge demand for Chinese shredded document recovery, our research focuses on Chinese homologous pieces. In this paper, we propose a method of completely clustering Chinese homologous pieces in which the distribution features of the characters in the pieces and the document layout are used to correlate adjacent pieces and cluster them in different areas of a document. The experimental results show that the proposed method has a good clustering effect on real pieces. For the dataset containing 10 page documents (a total of 462 pieces, its average accuracy is 97.19%.

  7. Effects of chewing in working memory processing.

    Science.gov (United States)

    Hirano, Yoshiyuki; Obata, Takayuki; Kashikura, Kenichi; Nonaka, Hiroi; Tachibana, Atsumichi; Ikehira, Hiroo; Onozuka, Minoru

    2008-05-09

    It has been generally suggested that chewing produces an enhancing effect on cognitive performance-related aspects of memory by the test battery. Furthermore, recent studies have shown that chewing is associated with activation of various brain regions, including the prefrontal cortex. However, little is known about the relation between cognitive performances affected by chewing and the neuronal activity in specified regions in the brain. We therefore examined the effects of chewing on neuronal activities in the brain during a working memory task using fMRI. The subjects chewed gum, without odor and taste components, between continuously performed two- or three-back (n-back) working memory tasks. Chewing increased the BOLD signals in the middle frontal gyrus (Brodmann's areas 9 and 46) in the dorsolateral prefrontal cortex during the n-back tasks. Furthermore, there were more prominent activations in the right premotor cortex, precuneus, thalamus, hippocampus and inferior parietal lobe during the n-back tasks after the chewing trial. These results suggest that chewing may accelerate or recover the process of working memory besides inducing improvement in the arousal level by the chewing motion.

  8. OPINION PIECE Rethinking responsibility in radiography: Some ...

    African Journals Online (AJOL)

    OPINION PIECE. Introduction. The field of radiography in South Africa is complex and presents a multitude of ethical issues. The discipline is often regarded as a supporting function in the healthcare chain, and a stepping-stone in the diagnostic process. This status of the discipline seems to have left many radiographers in ...

  9. Working Memory Capacity as a Dynamic Process

    Science.gov (United States)

    Simmering, Vanessa R.; Perone, Sammy

    2013-01-01

    A well-known characteristic of working memory (WM) is its limited capacity. The source of such limitations, however, is a continued point of debate. Developmental research is positioned to address this debate by jointly identifying the source(s) of limitations and the mechanism(s) underlying capacity increases. Here we provide a cross-domain survey of studies and theories of WM capacity development, which reveals a complex picture: dozens of studies from 50 papers show nearly universal increases in capacity estimates with age, but marked variation across studies, tasks, and domains. We argue that the full pattern of performance cannot be captured through traditional approaches emphasizing single causes, or even multiple separable causes, underlying capacity development. Rather, we consider WM capacity as a dynamic process that emerges from a unified cognitive system flexibly adapting to the context and demands of each task. We conclude by enumerating specific challenges for researchers and theorists that will need to be met in order to move our understanding forward. PMID:23335902

  10. Continuous Integration, essential piece in the software development.

    Directory of Open Access Journals (Sweden)

    Eduardo Aranda

    2012-12-01

    Full Text Available Continuous Integration is a practice proposed by eXtreme Programming, one of the most popular agile methodologies, which implementation involves automating one of the most heavy and complex task to predict the process of integration in software development. In this work it is described general aspects related to the practice of Continuous Integration in software development, so it is presented the feasibility of its application due the benefits it provides and the risks that can be mitigated with the use of it. It constitutes a theoretical basis for understanding and showing that this practice is an essential piece for software development.

  11. Fitting the pieces together

    CERN Multimedia

    2005-01-01

    The insertion operations for the CMS solenoid magnet are now nearing completion. After the outer shell of the vacuum tank and the solenoid itself, the teams inserted the inner wall of the tank and its heat shield into the huge red yoke on 2 November. These spectacular manoeuvres are now being followed up by the painstaking connection work. Once this phase of the work has been completed, leak and pressurisation tests will be carried out on the cooling circuit of the cold mass. The vacuum tank can then be welded shut. It will then be placed under vacuum before the coil is cooled and the power is turned on.

  12. Plutonium Oxide Process Capability Work Plan

    Energy Technology Data Exchange (ETDEWEB)

    Meier, David E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tingey, Joel M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-02-28

    Pacific Northwest National Laboratory (PNNL) has been tasked to develop a Pilot-scale Plutonium-oxide Processing Unit (P3U) providing a flexible capability to produce 200g (Pu basis) samples of plutonium oxide using different chemical processes for use in identifying and validating nuclear forensics signatures associated with plutonium production. Materials produced can also be used as exercise and reference materials.

  13. Sigtuna Think Piece 9

    African Journals Online (AJOL)

    warming, rising sea levels, atmospheric greenhouse gas emission levels and melting ice shelves have become household concepts. Similarly, there is increased understanding of the negative consequences of climate change, if the processes underlying these indicators remain unchecked. However, the science behind all ...

  14. Sigtuna Think Piece 6

    African Journals Online (AJOL)

    Various causal mechanisms influencing plant-food choice were identified using critical realist ontological analysis. ... Western countries, in a bid to help the region, have in the process included genetically modified ... smallholder farmer as a distinguished experimenter and researcher in traditional food security practices.

  15. Sigtuna Think Piece 8

    African Journals Online (AJOL)

    historically emergent 'researching with' agenda, and is in effect a social learning process. In putting .... Bourdieu's theory of habitus provides a theory of our unconscious actions, and helps us to understand the complexity of the ... capability, even if their social and education systems and cultures have not previously needed.

  16. What makes critical-solvent processes work

    Energy Technology Data Exchange (ETDEWEB)

    Brule, M.R.; Corbett, R.W.

    1984-06-01

    Critical-solvent processing (sometimes called supercritical-gas extraction) is an ongoing technology based on phase-equilibrium phenomena in the critical region. Many new practical applications of critical-solvent processing are being conceived and implemented in the food, drug and chemical industries. The advantages afforded by critical-solvent processing in performing difficult separations such as caffeine from coffee, nicotine from tobacco, chemotherapeutic drugs from plants, and chemical feedstocks from petroleum and synfuels residua have been realized just in the last decade or so.

  17. The Woman in Pieces

    Directory of Open Access Journals (Sweden)

    Everardo Rocha

    2013-10-01

    Full Text Available This article aims to analyze the representation of the feminine identity in advertising. It explores the notion of social identity as a category that is experienced in the tension between classification and value. It also discusses the logic by which ads elaborate an image and, while in this process, transform the woman into a silent and fragmented body. In this article, I follow the anthropological tradition of symbolic systems analysis, and with it contribute to the debate concerning social representations throughout mass communication in general and, particularly, in advertising.

  18. High sensory-processing sensitivity at work

    NARCIS (Netherlands)

    Evers, A.; Rasche, J.; Schabracq, M.J.

    2008-01-01

    In this study, the construct validity of an instrument for the measurement of sensory-processing sensitivity (SPS), the Highly Sensitive Person Scale (HSPS), was examined. Among the outcomes, first, the results confirm an earlier conclusion of researchers that the HSPS does not measure a

  19. Multiskilling--re-engineering work process.

    Science.gov (United States)

    Marshall, K

    1995-01-01

    Many North American companies have recognized the need to re-engineer their core processes to achieve breakthrough improvements in cost, service and efficiency. In fact, it is estimated that U.S. companies alone will spend millions on business re-engineering projects this year. But change experts say that most re-engineering is in name only, cautiously tackling only one process or department at a time. Even fewer hospitals have attempted this magnitude of change. Toronto's Sunnybrook Health Science Centre is the first institution of its size in Canada to embark on a multifaceted re-engineering strategy toward a model of patient focused care. The following is an overview of Sunnybrook's experience with the first of these strategies: multiskilling service workers. The concept of multiskilling provides for a focus on redesigning job classifications to broaden the scope of responsibility. For Sunnybrook, this entailed the amalgamation of six service positions--unit aide, health care aide, dietary aide, orderly, porter, housekeeper and attendant into one service assistant position.

  20. Heuristic algorithm for planning and scheduling of forged pieces heat treatment

    Directory of Open Access Journals (Sweden)

    R. Lenort

    2012-04-01

    Full Text Available The paper presents a heuristic algorithm for planning and scheduling of forged pieces heat treatment which allows maximizing the capacity exploitation of the heat treatment process and the entire forging process. Five Focusing Steps continuous improvement process was selected as a methodological basis for the algorithm design. Its application was supported by simulation experiments performed on a dynamic computer model of the researched process. The experimental work has made it possible to elicit the general rules for planning and scheduling of the heat treatment process of forged pieces which reduce losses caused by equipment conversion and setup times, and which increase the throughput of this process. The HIPO diagram was used to design the algorithm.

  1. Anticipated Activities in Maritime Work, Process Control, and Business Processes

    DEFF Research Database (Denmark)

    Andersen, Peter Bøgh

    2004-01-01

    Most activities are anticipated before they are executed. The paper presents methods for describing this anticipated state and the processes that may lead to a new state where the activities are executed. The method builds on linguistic case-theory.......Most activities are anticipated before they are executed. The paper presents methods for describing this anticipated state and the processes that may lead to a new state where the activities are executed. The method builds on linguistic case-theory....

  2. 29 CFR 778.420 - Combined hourly rates and piece rates.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Combined hourly rates and piece rates. 778.420 Section 778... Performed in Overtime Hours (secs. 7(g) (1) and (2)) § 778.420 Combined hourly rates and piece rates. Where an employee works at a combination of hourly and piece rates, the payment of a rate not less than one...

  3. A Decision Tool that Combines Discrete Event Software Process Models with System Dynamics Pieces for Software Development Cost Estimation and Analysis

    Science.gov (United States)

    Mizell, Carolyn Barrett; Malone, Linda

    2007-01-01

    The development process for a large software development project is very complex and dependent on many variables that are dynamic and interrelated. Factors such as size, productivity and defect injection rates will have substantial impact on the project in terms of cost and schedule. These factors can be affected by the intricacies of the process itself as well as human behavior because the process is very labor intensive. The complex nature of the development process can be investigated with software development process models that utilize discrete event simulation to analyze the effects of process changes. The organizational environment and its effects on the workforce can be analyzed with system dynamics that utilizes continuous simulation. Each has unique strengths and the benefits of both types can be exploited by combining a system dynamics model and a discrete event process model. This paper will demonstrate how the two types of models can be combined to investigate the impacts of human resource interactions on productivity and ultimately on cost and schedule.

  4. [Establishment of quality standard and discussion on standard decoction containing volatile oil pieces-Cinnamomi Ramulus pieces].

    Science.gov (United States)

    Deng, Zhe; Feng, Wei-Hong; Zhang, Jun; Jiao, Meng-Jiao; Zhang, Guo-Yuan; Wang, Shu-Hui; Cheng, Jin-Tang; Liu, An

    2017-07-01

    To prepare Cinnamomi Ramulus pieces standard decoction and establish its quality standard, provide quality reference for formula granules and other clinic non-traditional forms of medicines, and lay a foundation for standard decoction research for the pieces containing essential oil. 14 batches of Cinnamomi Ramulus pieces with different quality were collected from market and their extraction process was further improved based on the preparation principle of standard decoction to prepare the standard decoction of Cinnamomi Ramulus pieces. Then its transfer rate of Cinnamaldehyde, dry extract rate and pH value were calculated to evaluate its process stability; and a method for chromatographic fingerprint and content determination was also established. Results revealed that the dry extract rate for standard decoction of Cinnamomi Ramulus pieces was from 6.06%-8.95%, with an average value of 7.18%; the transfer rate of cinnamaldehyde was at the range of 29.6%-54.3%, with an average of 43.2%; and the pH value was at the range of 4.33-4.82. The fingerprint similarities between 14 batches of standard decoction of Cinnmomi Rammulus pieces and reference fingerprint were all>0.9. The established method for standard decoction was stable and its quality standard was perfect, suitable for evaluating the quality of standard decoction of Cinnanomi Ramulus pieces. Copyright© by the Chinese Pharmaceutical Association.

  5. Multiple piece turbine rotor blade

    Energy Technology Data Exchange (ETDEWEB)

    Kimmel, Keith D.; Plank, William L.

    2016-07-19

    A spar and shell turbine rotor blade with a spar and a tip cap formed as a single piece, the spar includes a bottom end with dovetail or fir tree slots that engage with slots on a top end of a root section, and a platform includes an opening on a top surface for insertion of the spar in which a shell made from an exotic high temperature resistant material is secured between the tip cap and the platform. The spar is tapered to form thinner walls at the tip end to further reduce the weight and therefore a pulling force due to blade rotation. The spar and tip cap piece is made from a NiAL material to further reduce the weight and the pulling force.

  6. Injury and time studies of working processes in fishing

    DEFF Research Database (Denmark)

    Jensen, Olaf Chresten

    2006-01-01

    Epidemiological studies of occupational injury document the incidence rates of the main structures as type of workplace and the work departments. The work processes within the departments represent an internal structure where the injury rates have not been given much attention before. The purpose...... of the present study was to relate the length of the working time to the number of injuries for the speciWc working processes in Wshing. Time measurements were performed during participation in Wshing trips with four diVerent kinds of vessels. Risk index numbers for the speciWc working processes were calculated...... by dividing the number of injuries within a 5-year period with the total sum of minutes used for each working process as measured during one Wshing trip for each type of Wshing. The highest risk index numbers were found for embarking and disembarking the vessel, which only takes a minimum of time...

  7. Psychological research in the process of creating artistic works

    Directory of Open Access Journals (Sweden)

    Milićević Nebojša

    2016-01-01

    Full Text Available This text is the review of previous attempt to research creative process in art. Neumann's and Weisberg's classification has been supplemented by the original research by the author of this text. On the example of Picasso's drawing of Guernica it was fulfilled the genesis of this monumental art piece in the light of the theory of aesthetic decision making (Ognjenović, 1980, 1991 and the theory of aesthetic evolution (Martindale, 1990. Based on the evaluation of the students of psychology (N = 32 on the scales of semantic differential, the trends of aesthetic modus in various phases in creating details of the picture (bull head, female had, horse head were analyzed. On the example of bull head details the hypothesis is mainly confirmed. The dimension of harmony (H during the phase of creation shows a soft fall of this detail (F = 3,02, p < 0.05. Decorative, redundant and richness in details (R during phases rapidly grows, while in finishing line falls (F = 13,88, p < 0.01. It is the same with the dimension of distance (D that rises during the period of creation of preliminary sketch bull head (F = 6,74, p < 0.05. Trend arousal potential is beside some oscillations, according with earlier Martindale's findings, shows a slow linear rise (F = 11,12, p < 0.05. Primordial content (PS changes from faze showing alternating oscillatory movement that can be hardly described by more simple regression equation. That is the main point of Picasso's sudden transformation in style of drawing. The results confirm the theoretical hypotheses. Finally, it can be concluded that beside the complexity of creative process, contemporary psychological research explain some of the aspects of creative process.

  8. Recovery of work-related stress: Complaint reduction and work-resumption are relatively independent processes

    NARCIS (Netherlands)

    de Vente, W.; Kamphuis, J.H.; Blonk, R.W.B.; Emmelkamp, P.M.G.

    2015-01-01

    Purpose: The process of recovery from work-related stress, consisting of complaint reduction and work-resumption, is not yet fully understood. The aim of this study was to investigate predictors of complaint reduction and work-resumption, as well as testing complaint reduction as a mediator in the

  9. Aligning Work Processes and the Adviser Portal Bank System

    DEFF Research Database (Denmark)

    Jørgensen, Jens Bæk; Lassen, Kristian Bisgaard

    2006-01-01

    The Adviser Portal (AP) is a new IT system for 15 Danish banks. The main goal of AP is to increase the efficiency and quality of bank advisers’ work. Re- quirements engineering for AP includes describing new work processes that must be supported by AP using a combination of: (1) prose and informal...... drawings; (2) The Adviser Portal (AP) is a new IT system for 15 Danish banks. The main goal of AP is to increase the efficiency and quality of bank advisers' work. Requirements engineering for AP includes describing new work processes that musty be supported by AP using a combination of: (1) prose...

  10. Working memory and intelligibility of hearing-aid processed speech.

    Science.gov (United States)

    Souza, Pamela E; Arehart, Kathryn H; Shen, Jing; Anderson, Melinda; Kates, James M

    2015-01-01

    Previous work suggested that individuals with low working memory capacity may be at a disadvantage in adverse listening environments, including situations with background noise or substantial modification of the acoustic signal. This study explored the relationship between patient factors (including working memory capacity) and intelligibility and quality of modified speech for older individuals with sensorineural hearing loss. The modification was created using a combination of hearing aid processing [wide-dynamic range compression (WDRC) and frequency compression (FC)] applied to sentences in multitalker babble. The extent of signal modification was quantified via an envelope fidelity index. We also explored the contribution of components of working memory by including measures of processing speed and executive function. We hypothesized that listeners with low working memory capacity would perform more poorly than those with high working memory capacity across all situations, and would also be differentially affected by high amounts of signal modification. Results showed a significant effect of working memory capacity for speech intelligibility, and an interaction between working memory, amount of hearing loss and signal modification. Signal modification was the major predictor of quality ratings. These data add to the literature on hearing-aid processing and working memory by suggesting that the working memory-intelligibility effects may be related to aggregate signal fidelity, rather than to the specific signal manipulation. They also suggest that for individuals with low working memory capacity, sensorineural loss may be most appropriately addressed with WDRC and/or FC parameters that maintain the fidelity of the signal envelope.

  11. Recovery of Work-Related Stress: Complaint Reduction and Work-Resumption are Relatively Independent Processes.

    Science.gov (United States)

    de Vente, Wieke; Kamphuis, Jan Henk; Blonk, Roland W B; Emmelkamp, Paul M G

    2015-09-01

    The process of recovery from work-related stress, consisting of complaint reduction and work-resumption, is not yet fully understood. The aim of this study was to investigate predictors of complaint reduction and work-resumption, as well as testing complaint reduction as a mediator in the association between predictors and work-resumption. Seventy-one patients on sickness-leave because of work-related stress complaints were followed over a period of 13 months. Predictors comprised personal (demographics, coping, cognitions), work-related (job-characteristics, social support), and illness-related (complaint duration, absence duration) variables. Dependent variables were distress complaints, burnout complaints, and work-resumption. Complaints reduced considerably over time to borderline clinical levels and work-resumption increased to 68% at 13 months. Predictors of stronger reduction of distress complaints were male gender, less working hours, less decision authority, more co-worker support, and shorter absence duration. Predictors of stronger reduction of burnout complaints were male gender, lower age, high education, less avoidant coping, less decision authority, more job security, and more co-worker support. Predictors of work-resumption were lower age and stronger reduction of burnout complaints. No indication for a mediating role of burnout complaints between the predictor age and work-resumption was found. Complaint reduction and work-resumption are relatively independent processes. Symptom reduction is influenced by individual and work-related characteristics, which holds promise for a multidisciplinary treatment approach for work-related stress.

  12. Sociotechnical design processes and working environment: The case of a continuous process wok

    DEFF Research Database (Denmark)

    Broberg, Ole

    2000-01-01

    A five-year design process of a continuous process wok has been studied with the aim of elucidating the conditions for integrating working environment aspects. The design proc-ess is seen as a network building activity and as a social shaping process of the artefact. A working environment log is ...

  13. Sociotechnical design processes and working environment: The case of a continuous process wok

    DEFF Research Database (Denmark)

    Broberg, Ole

    2000-01-01

    A five-year design process of a continuous process wok has been studied with the aim of elucidating the conditions for integrating working environment aspects. The design process is seen as a network building activity and as a social shaping process of the artefact. A working environment log is s...

  14. Working Memory Regulates Trait Anxiety-Related Threat Processing Biases

    OpenAIRE

    Booth, Rob; Mackintosh, Bundy; Sharma, Dinkar

    2016-01-01

    High trait anxious individuals tend to show biased processing of threat. Correlational evidence suggests that executive control could be used to regulate such threat-processing. On this basis, we hypothesised that trait anxiety-related cognitive biases regarding threat should be exaggerated when executive control is experimentally impaired by loading working memory. In Study 1, 68 undergraduates read ambiguous vignettes under high and low working memory load; later, their interpretations of t...

  15. Tool and ideological knowledge in Street Outreach Office working process

    OpenAIRE

    Kami,Maria Terumi Maruyama; Larocca,Liliana Muller; Chaves,Maria Marta Nolasco; Piosiadlo,Laura Christina Macedo; Albuquerque,Guilherme Souza

    2016-01-01

    Abstract OBJECTIVE To identify ideological knowledge and tool knowledgethat provide support to the Street Outreach Office working process. METHOD Qualitative and exploratory research. TwentyStreet Outreach Office professionals and six users collected the data, applying different semi-structured interview schedules for each category of participants. The resulting categories were analyzed in light of tool and ideological knowledge presented in the working process. RESULTS From the particip...

  16. Attention and Visuospatial Working Memory Share the Same Processing Resources

    Directory of Open Access Journals (Sweden)

    Jing eFeng

    2012-04-01

    Full Text Available Attention and visuospatial working memory (VWM share very similar characteristics; both have the same upper bound of about four items in capacity and they recruit overlapping brain regions. We examined whether both attention and visuospatial working memory share the same processing resources using a novel dual-task-costs approach based on a load-varying dual-task technique. With sufficiently large loads on attention and VWM, considerable interference between the two processes was observed. A further load increase on either process produced reciprocal increases in interference on both processes, indicating that attention and VWM share common resources. More critically, comparison among four experiments on the reciprocal interference effects, as measured by the dual-task costs, demonstrates no significant contribution from additional processing other than the shared processes. These results support the notion that attention and VWM share the same processing resources.

  17. Gender, the Labor Process and Dignity at Work

    Science.gov (United States)

    Crowley, Martha

    2013-01-01

    This study brings together gender inequality and labor process research to investigate how divergent control structures generate inequality in work experiences for women and men. Content-coded data on 155 work groups are analyzed using Qualitative Comparative Analysis to identify combinations of control techniques encountered by female and male…

  18. Does Multi-Level Intervention Enhance Work Process Knowledge?

    Science.gov (United States)

    Leppanen, Anneli; Hopsu, Leila; Klemola, Soili; Kuosma, Eeva

    2008-01-01

    Purpose: The aim of this study is to find out the impacts of participation in formal training and development of work on the work process knowledge of school kitchen workers. Design/methodology/approach: The article describes a follow-up study on the consequences of intervention. In total, 108 subjects participated both in the interventions and in…

  19. (Working) Memory and L2 Acquisition and Processing

    Science.gov (United States)

    Rankin, Tom

    2017-01-01

    This review evaluates two recent anthologies that survey research at the intersection of cognitive psychological investigations of (working) memory and issues in second language (L2), and bilingual processing and acquisition. The volumes cover similar ground by outlining the theoretical underpinnings of models of (working) memory as well as…

  20. Neural Correlates of Sublexical Processing in Phonological Working Memory

    Science.gov (United States)

    McGettigan, Carolyn; Warren, Jane E.; Eisner, Frank; Marshall, Chloe R.; Shanmugalingam, Pradheep; Scott, Sophie K.

    2011-01-01

    This study investigated links between working memory and speech processing systems. We used delayed pseudoword repetition in fMRI to investigate the neural correlates of sublexical structure in phonological working memory (pWM). We orthogonally varied the number of syllables and consonant clusters in auditory pseudowords and measured the neural…

  1. Sociotechnical design processes and working environment: The case of a continuous process wok

    DEFF Research Database (Denmark)

    Broberg, Ole

    2000-01-01

    A five-year design process of a continuous process wok has been studied with the aim of elucidating the conditions for integrating working environment aspects. The design process is seen as a network building activity and as a social shaping process of the artefact. A working environment log...... is suggested as a tool designers can use to integrate considerations of future operators' working environment....

  2. Working memory regulates trait anxiety-related threat processing biases.

    Science.gov (United States)

    Booth, Robert W; Mackintosh, Bundy; Sharma, Dinkar

    2017-06-01

    High trait anxious individuals tend to show biased processing of threat. Correlational evidence suggests that executive control could be used to regulate such threat-processing. On this basis, we hypothesized that trait anxiety-related cognitive biases regarding threat should be exaggerated when executive control is experimentally impaired by loading working memory. In Study 1, 68 undergraduates read ambiguous vignettes under high and low working memory load; later, their interpretations of these vignettes were assessed via a recognition test. Trait anxiety predicted biased interpretation of social threat vignettes under high working memory load, but not under low working memory load. In Study 2, 53 undergraduates completed a dot probe task with fear-conditioned Japanese characters serving as threat stimuli. Trait anxiety predicted attentional bias to the threat stimuli but, again, this only occurred under high working memory load. Interestingly however, actual eye movements toward the threat stimuli were only associated with state anxiety, and this was not moderated by working memory load, suggesting that executive control regulates biased threat-processing downstream of initial input processes such as orienting. These results suggest that cognitive loads can exacerbate trait anxiety-related cognitive biases, and therefore represent a useful tool for assessing cognitive biases in future research. More importantly, since biased threat-processing has been implicated in the etiology and maintenance of anxiety, poor executive control may be a risk factor for anxiety disorders. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  3. Recovery Processes During and After Work: Associations With Health, Work Engagement, and Job Performance.

    Science.gov (United States)

    de Bloom, Jessica; Kinnunen, Ulla; Korpela, Kalevi

    2015-07-01

    We examined energy management during work, recovery experiences after work and their connections to health, work engagement, and job performance. An online survey was completed by 1208 Finnish employees. Energy management was assessed through 13 strategies and recovery experiences through four experiences. As outcomes of recovery, we examined self-reported health, work engagement, and job performance. On average, employees applied three energy management strategies. The most beneficial strategies were work-related: shifting focus, goal setting, and helping coworkers. Both energy management and recovery experiences contributed to the outcomes. Employees benefit in terms of energy from shifting their focus to positive aspects of their jobs and demonstrating proactive social behavior at work. Recovery processes during and after work are closely connected to each other, to well-being and performance at work.

  4. Working memory and intelligibility of hearing-aid processed speech

    Directory of Open Access Journals (Sweden)

    Pamela eSouza

    2015-05-01

    Full Text Available Previous work suggested that individuals with low working memory capacity may be at a disadvantage in adverse listening environments, including situations with background noise or substantial modification of the acoustic signal. This study explored the relationship between patient factors (including working memory capacity and intelligibility and quality of modified speech for older individuals with sensorineural hearing loss. The modification was created using a combination of hearing aid processing (wide-dynamic range compression and frequency compression applied to sentences in multitalker babble. The extent of signal modification was quantified via an envelope fidelity index. We also explored the contribution of components of working memory by including measures of processing speed and executive function. We hypothesized that listeners with low working memory capacity would perform more poorly than those with high working memory capacity across all situations, and would also be differentially affected by high amounts of signal modification. Results showed a significant effect of working memory capacity for speech intelligibility, and an interaction between working memory, amount of hearing loss and signal modification. Signal modification was the major predictor of quality ratings. These data add to the literature on hearing-aid processing and working memory by suggesting that the working memory-intelligibility effects may be related to aggregate signal fidelity, rather than on the specific signal manipulation. They also suggest that for individuals with low working memory capacity, sensorineural loss may be most appropriately addressed with wide-dynamic range compression and/or frequency compression parameters that maintain the fidelity of the signal envelope.

  5. Integration of disabled people in an automated work process

    Science.gov (United States)

    Jalba, C. K.; Muminovic, A.; Epple, S.; Barz, C.; Nasui, V.

    2017-05-01

    Automation processes enter more and more into all areas of life and production. Especially people with disabilities can hardly keep step with this change. In sheltered workshops in Germany people with physical and mental disabilities get help with much dedication, to be integrated into the work processes. This work shows that cooperation between disabled people and industrial robots by means of industrial image processing can successfully result in the production of highly complex products. Here is described how high-pressure hydraulic pumps are assembled by people with disabilities in cooperation with industrial robots in a sheltered workshop. After the assembly process, the pumps are checked for leaks at very high pressures in a completely automated process.

  6. Working memory influences processing speed and reading fluency in ADHD.

    Science.gov (United States)

    Jacobson, Lisa A; Ryan, Matthew; Martin, Rebecca B; Ewen, Joshua; Mostofsky, Stewart H; Denckla, Martha B; Mahone, E Mark

    2011-01-01

    Processing-speed deficits affect reading efficiency, even among individuals who recognize and decode words accurately. Children with ADHD who decode words accurately can still have inefficient reading fluency, leading to a bottleneck in other cognitive processes. This "slowing" in ADHD is associated with deficits in fundamental components of executive function underlying processing speed, including response selection. The purpose of the present study was to deconstruct processing speed in order to determine which components of executive control best explain the "processing" speed deficits related to reading fluency in ADHD. Participants (41 ADHD, 21 controls), ages 9-14 years, screened for language disorders, word reading deficits, and psychiatric disorders, were administered measures of copying speed, processing speed, reading fluency, working memory, reaction time, inhibition, and auditory attention span. Compared to controls, children with ADHD showed reduced oral and silent reading fluency and reduced processing speed-driven primarily by deficits on WISC-IV Coding. In contrast, groups did not differ on copying speed. After controlling for copying speed, sex, severity of ADHD-related symptomatology, and GAI, slowed "processing" speed (i.e., Coding) was significantly associated with verbal span and measures of working memory but not with measures of response control/inhibition, lexical retrieval speed, reaction time, or intrasubject variability. Further, "processing" speed (i.e., Coding, residualized for copying speed) and working memory were significant predictors of oral reading fluency. Abnormalities in working memory and response selection (which are frontally mediated and enter into the output side of processing speed) may play an important role in deficits in reading fluency in ADHD, potentially more than posteriorally mediated problems with orienting of attention or perceiving the stimulus.

  7. Examining procedural working memory processing in obsessive-compulsive disorder.

    Science.gov (United States)

    Shahar, Nitzan; Teodorescu, Andrei R; Anholt, Gideon E; Karmon-Presser, Anat; Meiran, Nachshon

    2017-07-01

    Previous research has suggested that a deficit in working memory might underlie the difficulty of obsessive-compulsive disorder (OCD) patients to control their thoughts and actions. However, a recent meta-analyses found only small effect sizes for working memory deficits in OCD. Recently, a distinction has been made between declarative and procedural working memory. Working memory in OCD was tested mostly using declarative measurements. However, OCD symptoms typically concerns actions, making procedural working-memory more relevant. Here, we tested the operation of procedural working memory in OCD. Participants with OCD and healthy controls performed a battery of choice reaction tasks under high and low procedural working memory demands. Reaction-times (RT) were estimated using ex-Gaussian distribution fitting, revealing no group differences in the size of the RT distribution tail (i.e., τ parameter), known to be sensitive to procedural working memory manipulations. Group differences, unrelated to working memory manipulations, were found in the leading-edge of the RT distribution and analyzed using a two-stage evidence accumulation model. Modeling results suggested that perceptual difficulties might underlie the current group differences. In conclusion, our results suggest that procedural working-memory processing is most likely intact in OCD, and raise a novel, yet untested assumption regarding perceptual deficits in OCD. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  8. [Work process of community health agents: possibilities and limits].

    Science.gov (United States)

    da Costa, Marta Cocco; da Silva, Ethel Bastos; Jahn, Alice do Carmo; Resta, Darielli Gindri; Colom, Isabel Cristina dos Santos; de Carli, Rafaela

    2012-09-01

    The current study is aimed at getting to know and analyzing the work process of community health agents (CHA) from a municipality of the Northeastern region of the state of Rio Grande do Sul through a qualitative approach. The collection of data was carried out by means of a semi-structured interview applied to 23 CHAs. The Thematic Content Analysis was utilized for the data analysis. The results evidenced some possibilities, such as: communication with the participating families, establishing bonds, and recognition of/satisfaction towards the professional agent by the community; and among some of the limits were: difficulty to perform team work; difficulty to perform collective tasks in the community; low salary/work overload and lack of qualification. Evidence shows the need of reorganizing the work process of these professionals with higher investment in education and instrumentation by adopting a permanent educational policy.

  9. Process redesign: making your film library work for you.

    Science.gov (United States)

    Mace, J D

    1995-01-01

    When Riverside Methodist Hospitals in Columbus, Ohio, experienced serious problems in its radiology film library, administrators recognized that poor processes were to blame and used quality management techniques to create a new system. A radiology information system was part of Riverside's long-range plan, but an effective manual process was implemented first. Riverside had decided that closing the library to referring physician access would result in more successful operations. An Operational Changes Planning Committee composed of file clerks, technologists, managers, radiologists and referring physicians planned the redesign. The committee identified four goals: Reduce unmet requests. Improve response time. Benchmark operations of comparable organizations. Implement an effective manual process prior to automation. Steps in the redesign process included identifying the problem, applying statistical tools to the situation and understanding customer requirements. Flow charts, benchmarking, data collection within the department and focus groups provided important quantitative information. Creating an improved process included the following actions: Work simplification. Work elimination (especially non-value-added work). Uncovering and removing causes of delay. Automation of repetitive tasks via the RIS. Reduction and elimination of any rework steps. One important change was to close the library to physician access. There were moderate gains in effectiveness as a result of redesign of the manual process. Results have continued to improve, and the redesign process provided greater commitment and cooperation for the more significant improvements that followed the RIS introduction.

  10. Working memory training improves reading processes in typically developing children.

    Science.gov (United States)

    Loosli, Sandra V; Buschkuehl, Martin; Perrig, Walter J; Jaeggi, Susanne M

    2012-01-01

    The goal of this study was to investigate whether a brief cognitive training intervention results in a specific performance increase in the trained task, and whether there are transfer effects to other nontrained measures. A computerized, adaptive working memory intervention was conducted with 9- to 11-year-old typically developing children. The children considerably improved their performance in the trained working memory task. Additionally, compared to a matched control group, the experimental group significantly enhanced their reading performance after training, providing further evidence for shared processes between working memory and reading.

  11. Workers' Health Surveillance in the Meat Processing Industry: Work and Health Indicators Associated with Work Ability.

    Science.gov (United States)

    van Holland, Berry J; Soer, Remko; de Boer, Michiel R; Reneman, Michiel F; Brouwer, Sandra

    2015-09-01

    Workers' health surveillance (WHS) programs commonly measure a large number of indicators addressing health habits and health risks. Recently, work ability and functional capacity have been included as important risk measures in WHS. In order to address work ability appropriately, knowledge of associations with work and health measures is necessary. The objective of this study was to evaluate which of the factors measured in a WHS are independently associated with work ability in a group of meat processing workers. A cross-sectional study was performed in a large meat processing company in The Netherlands. Data were collected during a WHS between February 2012 and March 2014. Personal characteristics, health habits and health-risk indicators, functional capacity, and work-related factors were measured. Work ability was measured with the Work Ability Index and was used as dependent variable. Univariable and multivariable logistic regression analyses were conducted, a receiver operating characteristic curve was constructed and the area under the curve (AUC) was calculated. Data sets from 230 employees were used for analyses. The average age was 53 years and the average work ability index score was 39.3. In the final multivariable model age (OR 0.94), systolic blood pressure (OR 1.03), need for recovery (OR 0.56), and overhead work capacity (OR 3.95) contributed significantly. The AUC for this model was 0.81 (95% CI 0.75-0.86). Findings from the current study indicate that multifactorial outcomes (age, systolic blood pressure, need for recovery, and overhead work capacity) from a WHS were independently associated with work ability. These factors can be used to assess employees at risk for low work ability and might provide directions for interventions.

  12. Study of ancient Islamic gilded pieces combining PIXE-RBS on external microprobe with sem images

    Energy Technology Data Exchange (ETDEWEB)

    Ynsa, M.D.; Gutierrez, P.C.; Enguita, O. [Universidad Autonoma de Madrid, Centro de Micro-Analisis de Materiales (CMAM), Madrid (Spain); Chamon, J.; Pardo, A.I.; Arroyo, M.; Barrio, J. [Universidad Autonoma de Madrid, Dpto. Prehistoria y Arqueologia, Madrid (Spain); Gomez-Morilla, I. [Technische Universitaet Dresden, Institute fuer Stroemungsmechanik, Dresden (Germany); Ferretti, M. [CNR - Istituto per le Tecnologie Aplicate ai Beni Culturali, Monterotondo St., Roma (Italy); Climent-Font, A. [Universidad Autonoma de Madrid, Centro de Micro-Analisis de Materiales (CMAM), Madrid (Spain); Universidad Autonoma de Madrid, Dpto. Fisica Aplicada C-12, Madrid (Spain)

    2008-07-15

    Numerous metallic objects with very aesthetic and technological qualities have been recovered by archaeological excavations. Adequate processes of restoration and conservation treatments require the accurate determination of the elemental composition and distribution within the objects, as well as the identification of the nature and distribution of the corrosion products. Ideally the identification method should cause no alteration in the sample. In this work, different archaeological pieces with a gilded look have been characterized using simultaneously PIXE and RBS at the CMAM external microprobe in order to study the gilding metalworking done in the Iberian Peninsula during the Middle Ages. The gold layer thickness and its elemental concentrations of Ag, Au and Hg were determined by both techniques and compared with the scanning electron microscopy images obtained for some fragments of pieces. (orig.)

  13. A project management focused framework for assuring quality work processes

    Energy Technology Data Exchange (ETDEWEB)

    Gamsby, S.O.; Mize, J.D. [Allied Signal, Inc., Albuquerque, NM (United States). Federal Mfg. and Technologies; Reid, R.A. [New Mexico Univ., Albuquerque, NM (United States)

    1996-10-01

    Federal Manufacturing & Technologies/New Mexico (FM&T/NM) of AlliedSignal is an organization of approximately 300 associates providing operations support, engineering, and other technical services for DOE, New Mexico`s National Laboratories, etc. Work performed is primarily project-oriented and ranges from executing a major long-term contract for retrofitting and maintaining a large fleet of escort vehicles to creating a single, small, prototype electronic device for measuring radiation in a unique environment. FM&T/NM is functionally organized and operates in a classic matrix format with functional departments providing personnel with technical expertise, necessary physical resources, and administrative support to several project-based groups. Like most matrix-based organizations that provide support to diverse customers, FM&T/NM has encountered problems that occur when a group of project managers is expected to work together in using and scheduling a shared set of limited resources for the good of the organization as a whole. The framework for managing projects that we present focuses on developing, understanding, and managing the relationships between the functional organization structure, the system of work processes, and the management of projects. FM&T/NM retains its functional structure which primarily assigns personnel to work processes. The evolving role of the process leader focuses primarily on designing, managing, and improving the process, and the interactions among the subprocesses. The project manager is responsible for (1) translating customer requirements into product specifications, (2) determining the sequence of activities needed to meet project goals, (3) scheduling the required work processes, (4) monitoring project progress, (5) providing liaison between the customer and process leaders, and (6) having the desired product and/or service delivered to a satisfied customer in a timely manner.

  14. Effect of project work on secondary school students science process ...

    African Journals Online (AJOL)

    It also revealed that Gender was not a significant factor in students' science process skill acquisition in biology. Based on the findings of this study, it was recommended among others that workshops and conferences should be organized to update the teachers' knowledge on the use of students project work as an ...

  15. Research in adaptive management: working relations and the research process.

    Science.gov (United States)

    Amanda C. Graham; Linda E. Kruger

    2002-01-01

    This report analyzes how a small group of Forest Service scientists participating in efforts to implement adaptive management approach working relations, and how they understand and apply the research process. Nine scientists completed a questionnaire to assess their preferred mode of thinking (the Herrmann Brain Dominance Instrument), engaged in a facilitated...

  16. Statistical Inference at Work: Statistical Process Control as an Example

    Science.gov (United States)

    Bakker, Arthur; Kent, Phillip; Derry, Jan; Noss, Richard; Hoyles, Celia

    2008-01-01

    To characterise statistical inference in the workplace this paper compares a prototypical type of statistical inference at work, statistical process control (SPC), with a type of statistical inference that is better known in educational settings, hypothesis testing. Although there are some similarities between the reasoning structure involved in…

  17. Tool and ideological knowledge in Street Outreach Office working process

    Directory of Open Access Journals (Sweden)

    Maria Terumi Maruyama Kami

    2016-06-01

    Full Text Available Abstract OBJECTIVE To identify ideological knowledge and tool knowledgethat provide support to the Street Outreach Office working process. METHOD Qualitative and exploratory research. TwentyStreet Outreach Office professionals and six users collected the data, applying different semi-structured interview schedules for each category of participants. The resulting categories were analyzed in light of tool and ideological knowledge presented in the working process. RESULTS From the participant discourses the following ideological knowledge emerged: public policies and the needs of the person ina street situation and tool knowledge, as well as devices and tools for the care of people in street situations and a weekly schedule. CONCLUSION The focus on the working process discourse, supported by ideological knowledge, was verified. The structural dimension of the objective reality of the population in street situations was perceptible in the social determination of being situating on the street. When daily situations were revealed, the limitations to be overcome in the working process context were noticed.

  18. Some recent work on lattice structures for digital signal processing

    Indian Academy of Sciences (India)

    Abstract. This paper is concerned with a review of some recent work on derivation and synthesis of lattice structures for digital signal processing (DSP). ... (SFS), Aurobindo Marg, New Delhi 110 016, India Formerly with the Department of Electrical Engineering, Indian Institute of Technology Delhi, New Delhi 110 016, India ...

  19. Keynote presentation: Project Management, Technology and Evolving Work Processes

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth

    , Aarhus University. First, this Project Management course involves continual, ongoing development through working with real clients. To learn about project management from a communications perspective, learners were asked to work in teams for project conception and planning. To communicate with the client...... in four categories: Project Management Overview, Project Management Processes, Knowledge Management Theory and Case studies. Then, they were challenged to integrate key concepts from Knowledge Management theory into their project, as well as use the other readings to guide them in their work processes......, they needed to learn about and use project management documentation, as well as how to design and plan a useful project in a context with real multiple stakeholders. This instructional strategy focused the course not on Project Management software per se, which is changing so rapidly that today’s tools may...

  20. Interdisciplinarity in work process at a Psychosocial Attention Center

    Directory of Open Access Journals (Sweden)

    Maria Salete Bessa Jorge

    2010-09-01

    Full Text Available Objective: To analyze the work process of mental health professionals from a Psychosocial Attention Center (CAPS, from the knowledge and the practices applied in the production of care and its interface with user’s demands and the service offering. Methods: A case study with qualitative approach. Twenty-eight subjects joined in and were divided into three groups: I (eleven mental health workers, II (eleven users e III (six family members. The semistructured interview was used besides systematic observation, in the search for data about the work process of the professionals of the Psychosocial Attention Center, the relationship between team and user, offering and demand, access, technologies of care, knowledge and practices and interdisciplinarity. The investigation was based upon critical content analysis and was oriented by the flowchart analyzer. Results: The service organization and its work process are directed to the immediate supply of the population’s demands, which depicts a care based on prescriptive practices. Thus, the flow of assistance and the service offering complement each other in the need of a procedure and in its exhaustive offering by the service, dissolving interdisciplinary conductions of intervention shared with the user.Conclusion: Mental health care is still surrounded by biomedical hegemony centered in procedures directed to pharmacological prescription. Despite this reality, the work centered on the user and the utilization of soft technologies – communication, link, welcoming – begin to take part of the daily CAPS service offering, although it is only present in specific activities of certain procedures.

  1. [Clinical approach to work-related subjective processes: The perspective of psychodinamic of work].

    Science.gov (United States)

    Wlosko, Miriam

    2015-01-01

    Under what conditions the work activity may be structuring health and in which ones can become a source of disease and suffering? How explain the current situation of deterioration and increased mental pathology in relation to work? The job must be conceived as a trigger among others, or could play a specific role in the etiology of various psychological and psychosomatic pictures? This article addresses these questions from the perspective of Psychodynamic of work. Based on the theory of living labor developed by C. Dejours, the article analyzes the dynamic pleasure-suffering in relation to work and the role of defensive mechanisms in those dynamics. In turn, it characterized the current epidemiological situation, describing the prevalent pathologies related to mental health and work. Finally, the article exposes the thesis of Psychodynamic of work regarding the increase and aggravation of these pathologies. The article aims to present the main axes of Psychodynamics of Work, which is a theory and clinical practice whose object is the psychodynamic analysis of subjective and intersubjective processes mobilized by work situations.

  2. Visibility into the Work: TQM Work Process Analysis with HPT and ISD.

    Science.gov (United States)

    Beagles, Charles A.; Griffin, Steven L.

    2003-01-01

    Discusses the use of total quality management (TQM), work process flow diagrams, and ISD (instructional systems development) tools with HPT (human performance technology) to address performance gaps in the Veterans Benefits Administration (VBA). Describes performance goals, which were to improve accuracy and reduce backlog of claim files. (LRW)

  3. Comparison of posterior capsule opacification between a 1-piece and a 3-piece microincision intraocular lens.

    Science.gov (United States)

    Prinz, Ana; Vecsei-Marlovits, Pia Veronika; Sonderhof, Dietrich; Irsigler, Paul; Findl, Oliver; Weingessel, Birgit

    2013-01-01

    To compare the intensity of posterior capsular opacification (PCO) between a 1-piece and a 3-piece microincision cataract surgery intraocular lens (MICS IOL) in a prospective randomised study. 80 eyes of 40 patients with age-related cataract were enrolled in this study. Each patient received a 1-piece MICS IOL (AF-1 NY-60, Hoya, Tokyo, Japan) in one eye and a 3-piece MICS IOL (AF-1 iMICS Y-60H, Tokyo, Hoya) in the other eye. At the 1-year follow-up, the patients were examined at the slit lamp, visual acuity was determined and standardised high-resolution digital retroillumination images were taken for objective quantification of regeneratory PCO using an automated image analysis software (AQUA). The mean regeneratory PCO score (1-piece IOL: 0.2, 3-piece IOL 0.3, p=0.7) and the neodymium:yttrium-aluminium-garnet laser capsulotomy rate (two cases in 3-piece IOL group; p=0.5) were comparable low for both IOLs. Capsular folds occurred significantly more often in the 3-piece IOL group (p=0.02). Modification of the MICS IOL from a 3-piece to a 1-piece haptic design caused in short term no significant change in PCO amount. Compared with the 3-piece IOL, the 1-piece IOL led to significantly less capsular folds 1 year after surgery.

  4. [The working process of a neonatal intensive care unit].

    Science.gov (United States)

    Marques, Patricia de Araújo; Melo, Enirtes Caetano Prates

    2011-04-01

    The objective of this study was to analyze the organization of the working process of a Neonatal Intensive Care Unit through the relationships established between the social actors present in the micropolitical space. This study used an unconventional methodology, adapted to a qualitative study. A case series study was adopted, whose trajectory was referred to as sentinel-trajectory, through which it was possible to detect noises that affected the quality of the care provided. The analysis of the flowchart revealed weaknesses of the contract network, problems regarind the registers and documentations, and errors in the health care process.

  5. Methods for Process Evaluation of Work Environment Interventions

    DEFF Research Database (Denmark)

    Fredslund, Hanne; Strandgaard Pedersen, Jesper

    2004-01-01

    In recent years, intervention studies have become increasingly popular within occupational health psychology. The vast majority of such studies have focused on interventions themselves and their effects on the working environment and employee health and well-being. Few studies have focused on how......). This paper describes how organisation theory can be used to develop a method for identifying and analysing processes in relation to the implementation of work environment interventions. The reason for using organisation theory is twofold: 1) interventions are never implemented in a vacuum but in a specific...... organisational context (workplace) with certain characteristics, that the organisation theory can capture, 2) within the organisational sociological field there is a long tradition for studying organisational changes such as workplace interventions. In this paper process is defined as `individual, collective...

  6. Improving industrial designers work process by involving user research

    DEFF Research Database (Denmark)

    Dai, Zheng; Ómarsson, Ólafur

    2011-01-01

    With changing times, new technologies and more opinionated consumers, the modern industrial designer has found himself in need of fresher and more up to date approaches in his daily work. In a fast moving industry, the designer needs to keep a thinking process of dynamic and subjective attitude....... User research is part of user centered design (UCD). UCD has a reputation for subjective and reflective practice. In this paper there are two example cases. One is conducted by a classical industrial design process, and another is costing half of energy and time in user research. These examples...... will give the grounding for believing that the industrial designer needs to adopt user research methods to a level where he can still continue to work under the very nature of industrial design that has made it a successful practice for the last century. The combing of the approaches and attitude will help...

  7. Social networks in nursing work processes: an integrative literature review

    OpenAIRE

    Ana Cláudia Mesquita; Cristina Mara Zamarioli; Francine Lima Fulquini; Emilia Campos de Carvalho; Emilia Luigia Saporiti Angerami

    2017-01-01

    Abstract OBJECTIVE To identify and analyze the available evidence in the literature on the use of social networks in nursing work processes. METHOD An integrative review of the literature conducted in PubMed, CINAHL, EMBASE and LILACS databases in January 2016, using the descriptors social media, social networking, nursing, enfermagem, redes sociais, mídias sociais, and the keyword nursing practice, without year restriction. RESULTS The sample consisted of 27 international articles which w...

  8. DURING OF IMPULS THE FACTOR FOR PROCESSING TECHNOLOGICAL ELECTRICAL EROSION

    Directory of Open Access Journals (Sweden)

    Marcel S.POPA1

    2014-12-01

    Full Text Available EDM machines replicate the electrode metal piece solid geometric shape tool called electrode. Electrode shape is identical to the piece that will get. The working area of the machine, each electrical discharge creates a crater in the piece (material removed and the electrode wear. There is never mechanical contact between electrode and work piece. The electrode is made frequently copper or graphite. Solid electrode EDM machines are capable of motion in 4 axes, adhere electrode axis can travel: X, Y, Z and rotation on C, on its axis. The song remains fixed during processing, working in solidarity with the tank car.

  9. A Heuristic Bioinspired for 8-Piece Puzzle

    Science.gov (United States)

    Machado, M. O.; Fabres, P. A.; Melo, J. C. L.

    2017-10-01

    This paper investigates a mathematical model inspired by nature, and presents a Meta-Heuristic that is efficient in improving the performance of an informed search, when using strategy A * using a General Search Tree as data structure. The work hypothesis suggests that the investigated meta-heuristic is optimal in nature and may be promising in minimizing the computational resources required by an objective-based agent in solving high computational complexity problems (n-part puzzle) as well as In the optimization of objective functions for local search agents. The objective of this work is to describe qualitatively the characteristics and properties of the mathematical model investigated, correlating the main concepts of the A * function with the significant variables of the metaheuristic used. The article shows that the amount of memory required to perform this search when using the metaheuristic is less than using the A * function to evaluate the nodes of a general search tree for the eight-piece puzzle. It is concluded that the meta-heuristic must be parameterized according to the chosen heuristic and the level of the tree that contains the possible solutions to the chosen problem.

  10. Neoliberalist influences on nursing hospital work process and organization.

    Science.gov (United States)

    Souza, Norma Valéria Dantas de Oliveira; Gonçalves, Francisco Gleidson de Azevedo; Pires, Ariane da Silva; David, Helena Maria Scherlowski Leal

    2017-01-01

    To describe and analyze the influence of the neoliberal economic and political model on the nursing hospital work process and organization. Qualitative descriptive research, having as its scenery a university hospital. The subjects were 34 nursing workers. The data collection took place from March to July 2013, through semi-structured interview. The data treatment technique used was content analysis, which brought up the following category: working conditions precariousness and its consequences to the hospital work process and organization in the neoliberal context. The consequences of neoliberalism on hospital work process and organization were highlighted, being observed physical structure, human resources and material inadequacies that harms the assistance quality. In addition to wage decrease that cause the need of second jobs and work overload. There is a significant influence of the neoliberal model on hospital work, resulting on working conditions precariousness. Descrever e analisar a influência do modelo econômico e político neoliberal na organização e no processo de trabalho hospitalar de enfermagem. Pesquisa qualitativa e descritiva, tendo como cenário um hospital universitário. Os participantes foram 34 trabalhadores de enfermagem. A coleta ocorreu de março a julho de 2013, por meio de entrevista semiestruturada. A técnica de tratamento dos dados foi a análise de conteúdo, que fez emergir a seguinte categoria: precarização das condições laborais e suas repercussões para organização e processo de trabalho hospitalar no contexto neoliberal. Evidenciaram-se repercussões do neoliberalismo na organização e no processo de trabalho hospitalar, verificando-se inadequações na estrutura física, nos recursos humanos e materiais, que afetavam a qualidade da assistência. Além de perdas salariais que levam à necessidade de outros empregos e sobrecarga de trabalho. Há forte influência do modelo neoliberal no trabalho hospitalar, resultando

  11. Rework and workarounds in nurse medication administration process: implications for work processes and patient safety.

    Science.gov (United States)

    Halbesleben, Jonathon R B; Savage, Grant T; Wakefield, Douglas S; Wakefield, Bonnie J

    2010-01-01

    Health care organizations have redesigned existing and implemented new work processes intended to improve patient safety. As a consequence of these process changes, there are now intentionally designed "blocks" or barriers that limit how specific work actions, such as ordering and administering medication, are to be carried out. Health care professionals encountering these designed barriers can choose to either follow the new process, engage in workarounds to get past the block, or potentially repeat work (rework). Unfortunately, these workarounds and rework may lead to other safety concerns. The aim of this study was to examine rework and workarounds in hospital medication administration processes. Observations and semistructured interviews were conducted with 58 nurses from four hospital intensive care units focusing on the medication administration process. Using the constant comparative method, we analyzed the observation and interview data to develop themes regarding rework and workarounds. From this analysis, we developed an integrated process map of the medication administration process depicting blocks. A total of 12 blocks were reported by the participants. Based on the analysis, we categorized them as related to information exchange, information entry, and internal supply chain issues. Whereas information exchange and entry blocks tended to lead to rework, internal supply chain issues were more likely to lead to workarounds. A decentralized pharmacist on the unit may reduce work flow blocks (and, thus, workarounds and rework). Work process redesign may further address the problems of workarounds and rework.

  12. Effects of modafinil on working memory processes in humans.

    Science.gov (United States)

    Müller, Ulrich; Steffenhagen, Nikolai; Regenthal, Ralf; Bublak, Peter

    2004-12-01

    Modafinil is a well-tolerated psychostimulant drug with low addictive potential that is used to treat patients with narcolepsy or attention deficit disorders and to enhance vigilance in sleep-deprived military personal. So far, understanding of the cognitive enhancing effects of modafinil and the relevant neurobiological mechanisms are incomplete. The aim of this study was to investigate the effects of modafinil on working memory processes in humans and how they are related to noradrenergic stimulation of the prefrontal cortex. Sixteen healthy volunteers (aged 20-29 years) received either modafinil 200 mg or placebo using a double blind crossover design. Two computerized working memory tasks were administered, a numeric manipulation task that requires short-term maintenance of digit-sequences and different degrees of manipulation as well as delayed matching task that assesses maintenance of visuo-spatial information over varying delay lengths. The battery was supplemented by standardized paper pencil tasks of attentional functions. Modafinil significantly reduced error rates in the long delay condition of the visuo-spatial task and in the manipulation conditions, but not in the maintenance condition of the numeric task. Analyses of reaction times showed no speed-accuracy trade-off. Attentional control tasks (letter cancellation, trail-making, catch trials) were not affected by modafinil. In healthy volunteers without sleep deprivation modafinil has subtle stimulating effects on maintenance and manipulation processes in relatively difficult and monotonous working memory tasks, especially in lower performing subjects. Overlapping attentional and working memory processes have to be considered when studying the noradrenergic modulation of the prefrontal cortex.

  13. Last piece of ATLAS takes the plunge

    CERN Multimedia

    2008-01-01

    On Friday 29 February the second small wheel was lowered 100 metres underground into the ATLAS cavern in front of a captivated audience. Although called the "small wheels" they are small in name only - each wheel is 9.3 metres in diameter and weighs 100 tonnes including the massive shielding elements. This piece completes ATLAS’ muon spectrometer, which has the ability to accurately track particles to the width of a human hair. The first piece of ATLAS was installed in 2003 and, five years later, this small wheel is the final large piece of the detector to take the subterranean voyage to its final resting place.

  14. Implant Gigi One-Piece vs Two-Pieces dalam Praktek Sehari-Hari

    Directory of Open Access Journals (Sweden)

    Dian Lestari Kurnia

    2014-12-01

    prosedur bedah dan prosedur prostetik lebih sederhana. Desain ini juga meniadakan celah mikro pada perbatasan implant dan abutment. Desain implant gigi one-piece memiliki keterbatasan pada pilihan prosedur prostetik apabila dibandingkan dengan desain implant gigi two-pieces.   One-Piece Versus Two-pieces Tooth Implant In Daily Practice. Implant had been a gold standard to replace missing tooth. However, implant marketed today was considered complex, and needs a second surgery. Complications may occur such as screw loosening or fracture and the presence of micro gap at implant-abutment-junction that is found causing fixture failure. The one-piece-implant design may offer some advantages. Purpose: this paper was aimed to discuss the pros and cons of one-piece-implants and two-piece-implants. Case 1 A 43-year-old woman came to place an implant on #16. The available bone height was 5 mm. A trans alveolar sinus lift procedure was performed with 0,5 cc allograft. A 12 mm one-piece-implant was inserted. Case 2 A 24-year-old woman came to place an implant on #46. The available bone height was 12 mm and a 10 mm two-piece-implant was inserted. Discussion: One-piece-implant offers some advantage. It needs no second surgery, easier placement protocol, and more natural prosthetic procedures. The design is preventing the failure in implant-abutment-junction failure. The absence of micro gap in one-piece-implant seems superior in preventing crestal bone resorption. However, the prosthetic option was limited in one-piece-implant. Two-piece-implant offers more choices in prosthetic abutment. Conclusion: One-piece-implant was easier and provide simple protocol with limited choice on prosthetic.

  15. Environmental Criteria in the Spanish Public Works Procurement Process

    Directory of Open Access Journals (Sweden)

    José Luis Fuentes-Bargues

    2017-02-01

    Full Text Available Green Public Procurement (GPP is defined as a process of contracting products, services, and works with the least possible damage to the environment during their life cycle. In order to improve the knowledge about GPP, a study of the use of environmental tendering criteria in the Spanish public construction sector has been performed. The results of this study show that the use of environmental criteria in Spanish public sector construction procurement is low in comparison to a certain group of countries, known as “Green 7”, in the European Union. Environmental criteria is the fourth criterion in importance, but its weight in the global of the process is much lower than other criteria such as price, memory of the construction process and the delivery time. National administrations use environmental criteria more frequently because they have more resources and staff training about environmental issues. Environmental criteria are more used in the tendering of civil projects and works whose budget exceeds ten million euro due to the environmental impact of these kind and/or size of projects.

  16. Environmental Criteria in the Spanish Public Works Procurement Process.

    Science.gov (United States)

    Fuentes-Bargues, José Luis; González-Cruz, Mª Carmen; González-Gaya, Cristina

    2017-02-18

    Green Public Procurement (GPP) is defined as a process of contracting products, services, and works with the least possible damage to the environment during their life cycle. In order to improve the knowledge about GPP, a study of the use of environmental tendering criteria in the Spanish public construction sector has been performed. The results of this study show that the use of environmental criteria in Spanish public sector construction procurement is low in comparison to a certain group of countries, known as "Green 7", in the European Union. Environmental criteria is the fourth criterion in importance, but its weight in the global of the process is much lower than other criteria such as price, memory of the construction process and the delivery time. National administrations use environmental criteria more frequently because they have more resources and staff training about environmental issues. Environmental criteria are more used in the tendering of civil projects and works whose budget exceeds ten million euro due to the environmental impact of these kind and/or size of projects.

  17. Environmental Criteria in the Spanish Public Works Procurement Process

    Science.gov (United States)

    Fuentes-Bargues, José Luis; González-Cruz, Mª Carmen; González-Gaya, Cristina

    2017-01-01

    Green Public Procurement (GPP) is defined as a process of contracting products, services, and works with the least possible damage to the environment during their life cycle. In order to improve the knowledge about GPP, a study of the use of environmental tendering criteria in the Spanish public construction sector has been performed. The results of this study show that the use of environmental criteria in Spanish public sector construction procurement is low in comparison to a certain group of countries, known as “Green 7”, in the European Union. Environmental criteria is the fourth criterion in importance, but its weight in the global of the process is much lower than other criteria such as price, memory of the construction process and the delivery time. National administrations use environmental criteria more frequently because they have more resources and staff training about environmental issues. Environmental criteria are more used in the tendering of civil projects and works whose budget exceeds ten million euro due to the environmental impact of these kind and/or size of projects. PMID:28218706

  18. Working Memory in Aphasia: Considering Discourse Processing and Treatment Implications.

    Science.gov (United States)

    Henderson, Amy; Kim, Hana; Kintz, Stephen; Frisco, Nicole; Wright, Heather Harris

    2017-02-01

    Evidence suggests that persons with aphasia (PWAs) present with working memory impairments that affect a variety of language tasks. Most of these studies have focused on the phonological loop component of working memory and little attention has been paid to the episodic buffer component. The episodic buffer, as a limited capacity, multimodal system that binds and integrates information from the phonological loop, visuospatial sketchpad, and long-term memory would likely be involved in discourse processing. The purposes of this article were to (1) review discourse level deficits associated with aphasia, (2) describe how a deficit at the level of the episodic buffer could cause such deficits, (3) to review discourse treatment approaches for PWAs, and (4) present preliminary results from a novel discourse treatment study for PWAs. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  19. UniversAAL - Part I: Roadmap and the work processes

    OpenAIRE

    Furfari, Francesco; Tazari, Saied; Farshchian, Babak

    2011-01-01

    This sub-part of D1.3 establishes the common understanding of how the different major results expected from T1.4 relate to each other and defines in this way a roadmap from a reference model for AAL, over a reference architecture for AAL, to the concrete architecture underlying the development work in universAAL. It then describes the rationale and the pattern behind the consolidation processes in the project, which are leading to early results in parallel. A short reference to the ARCADE fra...

  20. Near-field environment/processes working group summary

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, W.M. [Center for Nuclear Waste Regulatory Analyses, San Antonio, TX (United States)

    1995-09-01

    This article is a summary of the proceedings of a group discussion which took place at the Workshop on the Role of Natural Analogs in Geologic Disposal of High-Level Nuclear Waste in San Antonio, Texas on July 22-25, 1991. The working group concentrated on the subject of the near-field environment to geologic repositories for high-level nuclear waste. The near-field environment may be affected by thermal perturbations from the waste, and by disturbances caused by the introduction of exotic materials during construction of the repository. This group also discussed the application of modelling of performance-related processes.

  1. Tool and ideological knowledge in Street Outreach Office working process.

    Science.gov (United States)

    Kami, Maria Terumi Maruyama; Larocca, Liliana Muller; Chaves, Maria Marta Nolasco; Piosiadlo, Laura Christina Macedo; Albuquerque, Guilherme Souza

    2016-01-01

    To identify ideological knowledge and tool knowledgethat provide support to the Street Outreach Office working process. Qualitative and exploratory research. TwentyStreet Outreach Office professionals and six users collected the data, applying different semi-structured interview schedules for each category of participants. The resulting categories were analyzed in light of tool and ideological knowledge presented in the working process. From the participant discourses the following ideological knowledge emerged: public policies and the needs of the person ina street situation and tool knowledge, as well as devices and tools for the care of people in street situations and a weekly schedule. The focus on the working process discourse, supported by ideological knowledge, was verified. The structural dimension of the objective reality of the population in street situations was perceptible in the social determination of being situating on the street. When daily situations were revealed, the limitations to be overcome in the working process context were noticed. Identificar os saberes ideológicos e instrumentais que subsidiam o processo de trabalho do Consultório na Rua. Pesquisa qualitativa e exploratória. A coleta de dados foi realizada junto a 20 profissionais e seis usuários do Consultório na Rua de um município do sul do Brasil, por meio de entrevistas com roteiros semiestruturados distintos para cada categoria de participantes. As classes resultantes foram analisadas à luz dos saberes ideológicos e instrumentais presentes no processo de trabalho. Dos discursos dos participantes emergiram os saberes ideológicos: políticas públicas e necessidades da pessoa em situação de rua e os saberes instrumentais: dispositivos e instrumentos no cuidado à pessoa em situação de rua e agenda semanal. Constatou-se a centralidade dos discursos no processo de trabalho, sustentado pelos saberes ideológicos. A dimensão estrutural da realidade objetiva da população em

  2. Work Around Distributed Image Processing and Workflow Management

    Science.gov (United States)

    Schaaff, A.; Bonnarel, F.; Claudon, J.-J.; Louys, M.; Pestel, C.; David, R.; Genaud, S.; Louys, M.; Wolf, C.

    2006-07-01

    Many people develop tools for image processing in various languages (C, C++, FORTRAN, MATLAB, etc) but do not diffuse them. One of the reasons is the portability and also the difficulty to make them collaborate with other tools. We have developed an architecture in which such tools can be wrapped and accessed through a standardized way (CGI and Web Services to use them in other applications, a Java Applet to use them directly). We have also developed Workflow libraries (client and server sides) to enable the (easy) creation and management of more complex tasks. The initially isolated tasks can now be associated into complex workflows. We are now working on the distribution of this architecture to enable the creation of image processing nodes.

  3. Manufacturing work and organizational stresses in export processing zones.

    Science.gov (United States)

    Lu, Jinky Leilanie

    2009-10-01

    In the light of global industrialization, much attention has been focused on occupational factors and their influence on the health and welfare of workers. This was a cross sectional study using stratified sampling technique based on industry sizes. The study sampled 24 industries, 6 were small scale industries and 9 each for medium and large scale industries. From the 24 industries, a total of 500 respondents for the questionnaire was taken. For occupational health and safety standards that industries have to comply with, there was low compliance among small-scale industries relative to the medium and large scale industries. Only one industry had an air cleaning device for cleaning contaminated air prior to emission into the external community. Among the 500 respondents, majority were female (88.8%), single (69.6%) and worked in the production or assembly-line station (87.4%). Sickness absenteeism was relative high among the workers in this study accounting for almost 54% among females and 48% among males. Many of the workers also reported of poor performance at work, boredom, tardiness and absenteeism. For association between work factors and personal factors, the following were found to be statistically significant at p=0.05. Boredom was associated with lack of skills training, lack of promotion, disincentives for sick leaves, poor relationship with boss and poor relationships with employers. On the other hand, poor performance was also associated with lack of skills training, lack of promotions, job insecurity, and poor relationship with employers. From the data generated, important issues that must be dealt with in work organizations include the quality of work life, and health and safety issues. Based on these findings, we can conclude that there are still issues on occupational health and safety (OHS) in the target site of export processing zones in the Philippines. There must be an active campaign for OHS in industries that are produce for the global market

  4. Do puzzle pieces and autism puzzle piece logos evoke negative associations?

    Science.gov (United States)

    Gernsbacher, Morton Ann; Raimond, Adam R; Stevenson, Jennifer L; Boston, Jilana S; Harp, Bev

    2017-08-01

    Puzzle pieces have become ubiquitous symbols for autism. However, puzzle-piece imagery stirs debate between those who support and those who object to its use because they believe puzzle-piece imagery evokes negative associations. Our study empirically investigated whether puzzle pieces evoke negative associations in the general public. Participants' ( N = 400) implicit negative associations were measured with an Implicit Association Task, which is a speeded categorization task, and participants' explicit associations were measured with an Explicit Association Task, which is a standard task for assessing consumers' explicit associations with brands (and images of those brands). Puzzle pieces, both those used as autism logos and those used more generically, evoked negative implicit associations ( t(399) = -5.357, p associations ( z = 4.693, p associated puzzle pieces, even generic puzzle pieces, with incompleteness, imperfection, and oddity. Our results bear public policy implications. If an organization's intention for using puzzle-piece imagery is to evoke negative associations, our results suggest the organization's use of puzzle-piece imagery is apt. However, if the organization's intention is to evoke positive associations, our results suggest that puzzle-piece imagery should probably be avoided.

  5. Mapping social processes at work in nursing knowledge development.

    Science.gov (United States)

    Hamilton, Patti; Willis, Eileen; Henderson, Julie; Harvey, Clare; Toffoli, Luisa; Abery, Elizabeth; Verrall, Claire

    2014-09-01

    In this paper, we suggest a blueprint for combining bibliometrics and critical analysis as a way to review published scientific works in nursing. This new approach is neither a systematic review nor meta-analysis. Instead, it is a way for researchers and clinicians to understand how and why current nursing knowledge developed as it did. Our approach will enable consumers and producers of nursing knowledge to recognize and take into account the social processes involved in the development, evaluation, and utilization of new nursing knowledge. We offer a rationale and a strategy for examining the socially-sanctioned actions by which nurse scientists signal to readers the boundaries of their thinking about a problem, the roots of their ideas, and the significance of their work. These actions - based on social processes of authority, credibility, and prestige - have bearing on the careers of nurse scientists and on the ways the knowledge they create enters into the everyday world of nurse clinicians and determines their actions at the bedside, as well as their opportunities for advancement. © 2014 Wiley Publishing Asia Pty Ltd.

  6. Social networks in nursing work processes: an integrative literature review

    Directory of Open Access Journals (Sweden)

    Ana Cláudia Mesquita

    Full Text Available Abstract OBJECTIVE To identify and analyze the available evidence in the literature on the use of social networks in nursing work processes. METHOD An integrative review of the literature conducted in PubMed, CINAHL, EMBASE and LILACS databases in January 2016, using the descriptors social media, social networking, nursing, enfermagem, redes sociais, mídias sociais, and the keyword nursing practice, without year restriction. RESULTS The sample consisted of 27 international articles which were published between 2011 and 2016. The social networks used were Facebook (66.5%, Twitter (30% and WhatsApp (3.5%. In 70.5% of the studies, social networks were used for research purposes, in 18.5% they were used as a tool aimed to assist students in academic activities, and in 11% for executing interventions via the internet. CONCLUSION Nurses have used social networks in their work processes such as Facebook, Twitter and WhatsApp to research, teach and watch. The articles show several benefits in using such tools in the nursing profession; however, ethical considerations regarding the use of social networks deserve further discussion.

  7. Productivity studies in fish processing: some factors affecting work performance

    National Research Council Canada - National Science Library

    Amaria, P.J

    1974-01-01

    The study of "Man-Machine" and "Man-Work" interactions help in understanding certain factors affecting work performance Work table layouts, working heights, size of fish, quality of input, incentive...

  8. Working memory: what relevance does it have in learning process and in language processing ?

    Directory of Open Access Journals (Sweden)

    Lidiomar José Mascarello

    2012-09-01

    Full Text Available This work consists of a systematic review of the literature on working memory.  Researches, including the ones developed by George Miller (1956 and Paul Carrillo-Mora (2010 have shown that working memory is involved in remembering visual and spatial information, as well as in cognitive activities and in planning strategies.  In the present article, we first examine some important facts in the history of research about working memory. After that, we analyze works published from 2001 to 2011 and available at the “Scientific Electronic Library Online”. During this process, we found studies about different aspects of working memory, but those related to language are usually focused on phonological aspects. There are some works about the relation between working memory and general aspects of intelligence, while others are about difficulties in learning and problems related to memory. We still do not have conclusive answers, in other words, the relation between problems in learning and working memory capacity is not widely accepted; however, there is a consensus that the amount of linguistic information we can keep in our working memory is influenced by spelling time and semantic similarity of the terms used. The studies analyzed here point to the same conclusions.

  9. Impaired retrieval processes evident during visual working memory in schizophrenia

    Directory of Open Access Journals (Sweden)

    Peter A. Lynn

    2016-09-01

    Full Text Available Prominent working memory (WM deficits have been observed in people with schizophrenia (PSZ across multiple sensory modalities, including the visuospatial realm. Electrophysiological abnormalities noted during early visual processing as well as later cognitive functions in PSZ may underlie deficiencies in WM ability, though the mechanisms linking behavior to neural responses are not well understood. WM dysfunction has also been observed in biological relatives of PSZ (REL and therefore may be a manifestation of genetic liability for the disorder. We administered a delayed response visuospatial WM task to 23 PSZ, 30 of their REL, and 37 healthy controls (CTRL to better understand the contributions of neural abnormalities to WM performance deficits associated with schizophrenia. PSZ performed more poorly on the WM task and failed to effectively process distractor stimuli as well as CTRL and REL. N1 electrophysiological responses to probes during retrieval differentiated the type and locations of stimuli presented during encoding in CTRL. Retrieval N1 responses in PSZ, however, failed to do so, while retrieval responses in REL showed more pronounced differentiation of stimulus features during encoding. Furthermore, neural responses during retrieval predicted behavioral performance in PSZ and REL, but not CTRL. These results suggest that retrieval processes are particularly important to efficient visuospatial WM function in PSZ and REL, and support further investigation of WM retrieval as a potential target for improving overall WM function through clinical intervention.

  10. Trust: missing piece(s) in the safety puzzle.

    Science.gov (United States)

    Conchie, Stacey M; Donald, Ian J; Taylor, Paul J

    2006-10-01

    While trust is increasingly recognized as a factor that impacts on safety behavior, the exact nature of trust and its role in shaping organizational safety is poorly understood. This special issue contains six articles that examine the relationship between trust and safety behavior in a range of high-risk work contexts. The issue begins with two articles that introduce the complex nature of trust and the positive and negative roles that trust can play in shaping an organization's safety culture. This background is then developed by two articles that explore the role of trust and distrust in safety performance, and uncover a range of significant but often counterintuitive relationships between forms of trust and safe behavior. Finally, the issue concludes with two articles that examine the role that leadership may play in developing trust. These articles examine the conditions important for the development of trust in leaders, and the trust-promoting actions that leaders can employ to influence employees' engagement in safety participation.

  11. Anterior segment parameters: comparison of 1-piece and 3-piece acrylic foldable intraocular lenses.

    Science.gov (United States)

    Behrouz, Mahmoud Jabbarvand; Kheirkhah, Ahmad; Hashemian, Hesam; Nazari, Rahman

    2010-10-01

    To compare anterior segment parameters between 1-piece and 3-piece acrylic foldable intraocular lenses (IOLs). Farabi Eye Hospital, Tehran, Iran. Prospective randomized comparative case series. Eyes scheduled for phacoemulsification were randomized into 2 equal groups to receive a 1-piece (AcrySof SA60AT) or 3-piece (AcrySof MA60AC) foldable acrylic IOL. Scheimpflug imaging (Pentacam) was used to measure anterior segment parameters, including anterior chamber depth (ACD), anterior chamber angle (ACA), and anterior chamber volume (ACV), preoperatively and 1 week and 3 months postoperatively. The study evaluated 125 eyes (123 patients). There was a statistically significant postoperative increase in ACD, ACA, and ACV at 1 week and 3 months in both IOL groups. Although the mean ACD was significantly higher in the 3-piece group at 1 week, there was no significant between-group difference in ACD, ACA, or ACV at 3 months. There was no significant change in anterior segment parameters from 1 week to 3 months in the 1-piece group; however, the 3-piece group had statistically significant decreases in ACD, ACA, and ACV. Refraction remained stable throughout the follow-up in the 1-piece group but showed a significant myopic shift from 1 week to 3 months in the 3-piece group. After phacoemulsification, the 1-piece acrylic foldable IOL showed little axial movement and provided stable refraction throughout the follow-up. The 3-piece IOL had significant forward movement and led to a myopic shift within 3 months postoperatively. Results indicate that spectacles can be prescribed earlier in eyes with a 1-piece IOL. Copyright © 2010 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  12. Prefrontal inhibition of threat processing protects working memory from interference.

    Directory of Open Access Journals (Sweden)

    Robert James Clarke

    2013-05-01

    Full Text Available Bottom-up processes can interrupt ongoing cognitive processing in order to adaptively respond to emotional stimuli of high potential significance, such as those that threaten wellbeing. However it is vital that this interference can be modulated in certain contexts to focus on current tasks. Deficits in the ability to maintain the appropriate balance between cognitive and emotional demands can severely impact on day-to-day activities. This fMRI study examined this interaction between threat processing and cognition; 18 adult participants performed a visuospatial working memory (WM task with two load conditions, in the presence and absence of anxiety induction by threat of electric shock. Threat of shock interfered with performance in the low cognitive load condition; however interference was eradicated under high load, consistent with engagement of emotion regulation mechanisms. Under low load the amygdala showed significant activation to threat of shock that was modulated by high cognitive load. A directed top-down control contrast identified two regions associated with top-down control; ventrolateral PFC and dorsal ACC. Dynamic causal modelling provided further evidence that under high cognitive load, top-down inhibition is exerted on the amygdala and its outputs to prefrontal regions. Additionally, we hypothesised that individual differences in a separate, non-emotional top-down control task would predict the recruitment of dorsal ACC and ventrolateral PFC during top-down control of threat. Consistent with this, performance on a separate dichotic listening task predicted dorsal ACC and ventrolateral PFC activation during high WM load under threat of shock, though activation in these regions did not directly correlate with WM performance. Together, the findings suggest that under high cognitive load and threat, top-down control is exerted by dACC and vlPFC to inhibit threat processing, thus enabling WM performance without threat

  13. Knowledge work productivity effect on quality of knowledge work in software development process in SME

    Science.gov (United States)

    Yusoff, Mohd Zairol; Mahmuddin, Massudi; Ahmad, Mazida

    2016-08-01

    Knowledge and skill are necessary to develop the capability of knowledge workers. However, there is very little understanding of what the necessary knowledge work (KW) is, and how they influence the quality of knowledge work or knowledge work productivity (KWP) in software development process, including that in small and medium-sized (SME) enterprise. The SME constitutes a major part of the economy and it has been relatively unsuccessful in developing KWP. Accordingly, this paper seeks to explore the influencing dimensions of KWP that effect on the quality of KW in SME environment. First, based on the analysis of the existing literatures, the key characteristics of KW productivity are defined. Second, the conceptual model is proposed, which explores the dimensions of the KWP and its quality. This study analyses data collected from 150 respondents (based on [1], who involve in SME in Malaysia and validates the models by using structural equation modeling (SEM). The results provide an analysis of the effect of KWP on the quality of KW and business success, and have a significant relevance for both research and practice in the SME

  14. Working Memory Processing In Normal Subjects and Subjects with Dyslexia

    Science.gov (United States)

    Bowyer, S. M.; Lajiness-O'Neill, R.; Weiland, B. J.; Mason, K.; Tepley, N.

    2004-10-01

    Magnetoencephalography (MEG) was used to determine the neuroanatomical location of working memory (WM) processes. Differences between subjects with dyslexia (SD; n=5) and normal readers (NR; n=5) were studied during two WM tasks. A spatial WM task (SMW) consisted of blocks visually presented in one of 12 positions for 2 s each. Subjects were to determine if the current position matched the position presented 2 slides earlier (N-Back Test). The verbal task (VMW) consisted of presentation of a single letter. The location of cortical activity during SWM in NR (determined with MR-FOCUSS analysis) was in the right superior temporal gyrus (STG) and right angular gyrus (AG). Similar activation was seen in SD with a slight delay of approximately 20 ms. During VWM activity was seen in LEFT STG and LEFT AG in NR. In contrast for SD, activation was in the RIGHT STG and RIGHT AG. This study demonstrates the possibility to differentiate WM processing in subjects with and without learning disorders.

  15. Productivity studies in fish processing: methods of establishing work performance

    National Research Council Canada - National Science Library

    Amaria, P.J

    1974-01-01

    Relative merits of "Performance Rating", "Westinghouse Leveling Plan", "Methods-Time Measurement" and "Work Sampling" techniques used for establishing standard work performance in th fishing industry...

  16. Different Digitalization Techniques for 3D Printing of Anatomical Pieces.

    Science.gov (United States)

    Ugidos Lozano, M T; Blaya Haro, F; Ruggiero, Alessandro; Manzoor, S; Nuere Menendez-Pidal, S; Juanes Méndez, J A

    2018-01-25

    The use of different technological devices that allow the creation of three-dimensional models is in constant evolution, allowing a greater application of these technologies in different fields of health sciences and medical training. The equipment for digitalization is becoming increasingly sophisticated allowing obtaining three-dimensional which are more defined and similar to real image and original object. In this work, different modalities of designing 3D anatomical models of bone pieces are presented, for use by students of different disciplines in Health Sciences. To do this we digitalized bone pieces, with different models of scanners, producing images that can be transformed for 3D printing, with a Colido X 3045 printer by digital treatment with different software.

  17. Comparison of Nd:YAG capsulotomy rate between 1-piece and 3-piece acrylic intraocular lenses

    Science.gov (United States)

    Kim, Sun Young; Chung, Young Kwon; Shin, Hye Young; Lee, Mee Yon; Lee, Young-Chun; Kim, Su-Young

    2017-01-01

    Abstract The aim of the study is to compare Nd:YAG capsulotomy rate between acrylic 1- and 3-piece intraocular lenses. Among 924 eyes of 762 patients who received cataract surgery, we selected the 303 patients (404 eyes) implanted with an SN60WF 1-piece intraocular lens (Alcon, Fort Worth, TX) or a YA-60BBR 3-piece intraocular lens (Hoya Co., Tokyo, Japan). For intraindividual comparison, we enrolled the 17 patients implanted with an SN60WF in 1 eye and a YA-60BBR in the contralateral eye. We compared Nd:YAG capsulotomy rate between acrylic 1- and 3-piece intraocular lenses 24 months after the operation. Of the 404 eyes in this study, Nd:YAG capsulotomy was performed in 20 of 268 eyes (7.5%) in the SN60WF 1-piece intraocular lens group and 24 of 136 eyes (17.6%) in the YA-60BBR 3-piece intraocular lens group; the difference was statistically significant (P = .002). Among the 17 patients (34 eyes) who were implanted with 2 different inraocular lenses, Nd:YAG capsulotomy was performed in only 2 eyes (12%) in the SN60WF group and 9 eyes (53%) in the YA-60BBR group; the difference was statistically significant (P = .020). The authors found a significantly greater incidence of Nd:YAG capsulotomy in eyes who received 3-piece lenses compared with those who received 1-piece lenses. PMID:28682911

  18. Social networks in nursing work processes: an integrative literature review.

    Science.gov (United States)

    Mesquita, Ana Cláudia; Zamarioli, Cristina Mara; Fulquini, Francine Lima; Carvalho, Emilia Campos de; Angerami, Emilia Luigia Saporiti

    2017-03-20

    To identify and analyze the available evidence in the literature on the use of social networks in nursing work processes. An integrative review of the literature conducted in PubMed, CINAHL, EMBASE and LILACS databases in January 2016, using the descriptors social media, social networking, nursing, enfermagem, redes sociais, mídias sociais, and the keyword nursing practice, without year restriction. The sample consisted of 27 international articles which were published between 2011 and 2016. The social networks used were Facebook (66.5%), Twitter (30%) and WhatsApp (3.5%). In 70.5% of the studies, social networks were used for research purposes, in 18.5% they were used as a tool aimed to assist students in academic activities, and in 11% for executing interventions via the internet. Nurses have used social networks in their work processes such as Facebook, Twitter and WhatsApp to research, teach and watch. The articles show several benefits in using such tools in the nursing profession; however, ethical considerations regarding the use of social networks deserve further discussion. Identificar e analisar as evidências disponíveis na literatura sobre a utilização de redes sociais nos processos de trabalho em enfermagem. Revisão integrativa da literatura realizada em janeiro de 2016, nas bases de dados PubMed, CINAHL, EMBASE e LILACS, com os descritores social media, social networking, nursing, enfermagem, redes sociais, mídias sociais e a palavra-chave nursing practice, sem restrição de ano. A amostra foi composta por 27 artigos, os quais foram publicados entre 2011 e 2016, todos internacionais. As redes sociais utilizadas foram o Facebook (66,5%), o Twitter (30%) e o WhatsApp (3,5%). Em 70,5% dos estudos as redes sociais foram utilizadas para fins de pesquisa, em 18,5% como ferramenta para auxiliar estudantes nas atividades acadêmicas, e em 11% para a realização de intervenções via internet. Em seus processos de trabalho, os enfermeiros têm utilizado

  19. Workers with Occupational Contact Dermatitis: Work Outcomes and Return to Work Process in the First Six Months following Diagnosis

    Directory of Open Access Journals (Sweden)

    D. Linn Holness

    2011-01-01

    Full Text Available Workers with occupational contact dermatitis may have poor outcomes that impact their health, work, and quality of life. While there is information available on overall return to work, little is known about the actual return to work process. The objectives of the study were to describe the return to work experience and work outcome in workers with contact dermatitis following diagnosis. 78 workers with occupational contact dermatitis were followed for 6 months after assessment. Information collected included clinical presentation and status, the return to work process and work outcomes. Six months after assessment, 38% were not working, almost all because of their skin problem. Of the 62% working 32% had changed job, most because of their skin problem. Limited advice to enable return to work and communication were reported. These findings suggest that there are gaps in return to work programs for occupational contact dermatitis and further research is needed.

  20. Last piece of the puzzle for ATLAS

    CERN Multimedia

    Clare Ryan

    At around 15.40 on Friday 29th February the ATLAS collaboration cracked open the champagne as the second of the small wheels was lowered into the cavern. Each of ATLAS' small wheels are 9.3 metres in diameter and weigh 100 tonnes including the massive shielding elements. They are the final parts of ATLAS' muon spectrometer. The first piece of ATLAS was installed in 2003 and since then many detector elements have journeyed down the 100 metre shaft into the ATLAS underground cavern. This last piece completes this gigantic puzzle.

  1. Pornographic picture processing interferes with working memory performance.

    Science.gov (United States)

    Laier, Christian; Schulte, Frank P; Brand, Matthias

    2013-01-01

    Some individuals report problems during and after Internet sex engagement, such as missing sleep and forgetting appointments, which are associated with negative life consequences. One mechanism potentially leading to these kinds of problems is that sexual arousal during Internet sex might interfere with working memory (WM) capacity, resulting in a neglect of relevant environmental information and therefore disadvantageous decision making. In this study, 28 healthy individuals performed 4 experimental manipulations of a pictorial 4-back WM task with neutral, negative, positive, or pornographic stimuli. Participants also rated 100 pornographic pictures with respect to sexual arousal and indicated masturbation urges previous to and following pornographic picture presentation. Results revealed worse WM performance in the pornographic picture condition of the 4-back task compared with the three remaining picture conditions. Furthermore, hierarchical regression analysis indicated an explanation of variance of the sensitivity in the pornographic picture condition by the subjective rating of the pornographic pictures as well as by a moderation effect of masturbation urges. Results contribute to the view that indicators of sexual arousal due to pornographic picture processing interfere with WM performance. Findings are discussed with respect to Internet sex addiction because WM interference by addiction-related cues is well known from substance dependencies.

  2. Research on the use of particles coming from almond husk as fillers for vinyl plastisols to manufacture hollow pieces with similar surface finishing than wood by using a rotational moulding process

    Science.gov (United States)

    Crespo Amoros, Jose Enrique

    PVC pastes or plasticized PVC offer great possibilities in the industrial field in which this research work has been developed since they show great relevance in plastic processing. On one hand, it is important to study these materials from different points of view: quality improvement, wide range of performance, high versatility, low costs,.... On the other hand, most of the industrial fields that usually employ these polymeric materials are characterized by developing products on which aesthetic considerations and surface finishing acquire special relevance. These industrial fields include all those on which new designs require complex shapes and new and novelty surface finishing such as interior design (furniture, wood products,...) toys industry, houseware, shoe industry,.... The main aim of this work is to improve the use of PVC plastisols in these industrial fields by optimizing formulations with new additives (low toxicity plasticizers) and fillers (lignocellulosic wastes) to obtain new materials that minimize damages to environment. In this work, we have developed new plastisol formulations based on the use of low toxicity plasticizers to obtain more ecological plastisols. We have used a biodegradable plasticizer DINCH which is a derivative of a dicarboxilate as substitute of traditional plasticizers based on phthalates. As we are working with relatively new plasticizers (specially at industrial level) we have performed a whole study of its properties by using different experimental analysis techniques such as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamical-mechanical analysis (DMA) and espectrofotometric techniques (visible and infrared). Furthermore a complete mechanical characterization has been carried out to analyze the most important parameters that influence on materials properties such as processing parameters (temperature and time) and plastisol formulations (mainly plasticizer content). We have also performed a

  3. Differential Effects of Alcohol Consumption Behaviours on Working Memory Processes

    OpenAIRE

    Shaunak Sanjay Deshpande

    2015-01-01

    Alcohol exposure in a clinical population impairs working memory. In order to establish the effects of alcohol on working memory in typical young adults, this study looked at their alcohol consumption behaviours and how they predict working memory. A battery of cognitive tasks and a recreational drug use questionnaire assessed working memory and alcohol consumption of 100 participants. The results revealed that alcohol abstinence predicted set-shifting, verbal executive, phonological loop, sp...

  4. Product management of making large pieces through Rapid Prototyping PolyJet® technology

    Science.gov (United States)

    Belgiu, G.; Cărăuşu, C.; Şerban, D.; Turc, C. G.

    2017-08-01

    The rapid prototyping process has already become a classic manufacturing process for parts and assemblies, either polymeric or metal parts. Besides the well-known advantages and disadvantages of the process, the use of 3D printers has a great inconvenience: the overall dimensions of the parts are limited. Obviously, there is a possibility to purchase a larger (and more expensive) 3D printer, but there are always larger pieces to be manufactured. One solution to this problem is the splitting of parts into several components that can be manufactured. The component parts can then be assembled in a single piece by known methods such as welding, gluing, screwing, etc. This paper shows our experience in making large pieces on the Strarasys® Objet24 printer, pieces larger than the tray sizes. The results obtained are valid for any 3D printer using the PolyJet® process.

  5. 29 CFR 780.313 - Piece rate basis.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Piece rate basis. 780.313 Section 780.313 Labor Regulations... Provisions § 780.313 Piece rate basis. The exemption provides that the employee must be paid on a piece-rate basis. To be exempt the employee must be compensated solely on piece rates during the workweek. The...

  6. Cognitive Risk Factors for Specific Learning Disorder: Processing Speed, Temporal Processing, and Working Memory.

    Science.gov (United States)

    Moll, Kristina; Göbel, Silke M; Gooch, Debbie; Landerl, Karin; Snowling, Margaret J

    2016-01-01

    High comorbidity rates between reading disorder (RD) and mathematics disorder (MD) indicate that, although the cognitive core deficits underlying these disorders are distinct, additional domain-general risk factors might be shared between the disorders. Three domain-general cognitive abilities were investigated in children with RD and MD: processing speed, temporal processing, and working memory. Since attention problems frequently co-occur with learning disorders, the study examined whether these three factors, which are known to be associated with attention problems, account for the comorbidity between these disorders. The sample comprised 99 primary school children in four groups: children with RD, children with MD, children with both disorders (RD+MD), and typically developing children (TD controls). Measures of processing speed, temporal processing, and memory were analyzed in a series of ANCOVAs including attention ratings as covariate. All three risk factors were associated with poor attention. After controlling for attention, associations with RD and MD differed: Although deficits in verbal memory were associated with both RD and MD, reduced processing speed was related to RD, but not MD; and the association with RD was restricted to processing speed for familiar nameable symbols. In contrast, impairments in temporal processing and visuospatial memory were associated with MD, but not RD. © Hammill Institute on Disabilities 2014.

  7. Differential Effects of Alcohol Consumption Behaviours on Working Memory Processes

    Directory of Open Access Journals (Sweden)

    Shaunak Sanjay Deshpande

    2015-11-01

    Full Text Available Alcohol exposure in a clinical population impairs working memory. In order to establish the effects of alcohol on working memory in typical young adults, this study looked at their alcohol consumption behaviours and how they predict working memory. A battery of cognitive tasks and a recreational drug use questionnaire assessed working memory and alcohol consumption of 100 participants. The results revealed that alcohol abstinence predicted set-shifting, verbal executive, phonological loop, spatial and visual working memory performance, which is consistent with current literature. I surmise that the recent use of alcohol plays a role in working memory impairments and offer novel findings that the length of abstinence plays a role in the cognitive recovery of young adults.

  8. Recovery after Work: The Role of Work Beliefs in the Unwinding Process

    Science.gov (United States)

    Zoupanou, Zoe; Cropley, Mark; Rydstedt, Leif W.

    2013-01-01

    According to the Effort-Recovery model, mental or physical detachment from work is an important mechanism of work related recovery, as delayed recovery has been associated with range of negative health symptoms. In this paper, we examine whether recovery from work (in the form of mentally disengagement from work) is affected by the concept of ‘work ethic’, which refers to beliefs workers hold about their work and leisure and the effects of experiencing interruptions at work. Two indices of post-work recovery were utilized: problem solving pondering and psychological detachment. The study was conducted with 310 participants employed from diverse occupational sectors. Main effects of positive and negative appraisal of work interruption and beliefs were analysed using mediated and moderated regression analysis on problem-solving pondering and detachment. Weakened belief in wasted time as a partial mediator, reduced problem-solving pondering post work when interruptions were appraised as positive, and a high evaluation of leisure partially mediated problem-solving pondering when interruptions were appraised as positive. The results also showed that a high evaluation of centrality of work and leisure moderated the effect of negative appraisal of work interruption on elevated problem-solving pondering. Positive appraisal of work interruption was related to problem-solving pondering, and the strength of this association was further moderated by a strong belief in delay of gratification. In addition, employees' positive appraisal of work interruption was related to work detachment, and the strength of this association was further moderated by strong beliefs in hard work and self-reliance. These findings are discussed in terms of their theoretical and practical implications for employees who are strongly influenced by such work beliefs. PMID:24349060

  9. Recovery after work: the role of work beliefs in the unwinding process.

    Directory of Open Access Journals (Sweden)

    Zoe Zoupanou

    Full Text Available According to the Effort-Recovery model, mental or physical detachment from work is an important mechanism of work related recovery, as delayed recovery has been associated with range of negative health symptoms. In this paper, we examine whether recovery from work (in the form of mentally disengagement from work is affected by the concept of 'work ethic', which refers to beliefs workers hold about their work and leisure and the effects of experiencing interruptions at work. Two indices of post-work recovery were utilized: problem solving pondering and psychological detachment. The study was conducted with 310 participants employed from diverse occupational sectors. Main effects of positive and negative appraisal of work interruption and beliefs were analysed using mediated and moderated regression analysis on problem-solving pondering and detachment. Weakened belief in wasted time as a partial mediator, reduced problem-solving pondering post work when interruptions were appraised as positive, and a high evaluation of leisure partially mediated problem-solving pondering when interruptions were appraised as positive. The results also showed that a high evaluation of centrality of work and leisure moderated the effect of negative appraisal of work interruption on elevated problem-solving pondering. Positive appraisal of work interruption was related to problem-solving pondering, and the strength of this association was further moderated by a strong belief in delay of gratification. In addition, employees' positive appraisal of work interruption was related to work detachment, and the strength of this association was further moderated by strong beliefs in hard work and self-reliance. These findings are discussed in terms of their theoretical and practical implications for employees who are strongly influenced by such work beliefs.

  10. Serial order working memory and numerical ordinal processing share common processes and predict arithmetic abilities.

    Science.gov (United States)

    Attout, Lucie; Majerus, Steve

    2017-09-12

    Recent studies have demonstrated that both ordinal number processing and serial order working memory (WM) abilities predict calculation achievement. This raises the question of shared ordinal processes operating in both numerical and WM domains. We explored this question by assessing the interrelations between numerical ordinal, serial order WM, and arithmetic abilities in 102 7- to 9-year-old children. We replicated previous studies showing that ordinal numerical judgement and serial order WM predict arithmetic abilities. Furthermore, we showed that ordinal numerical judgement abilities predict arithmetic abilities after controlling for serial order WM abilities while the relationship between serial order WM and arithmetic abilities was mediated by numerical ordinal judgement performance. We discuss these results in the light of recent theoretical frameworks considering that numerical ordinal codes support the coding of order information in verbal WM. Statement of contribution What is already known on this subject? Numerical ordinal processes predict mathematical achievement in adults. Order WM processing predicts first mathematical abilities. What the present study adds? Numerical ordinal processes predict mathematical achievement in children and independently of order WM. The link between order WM and mathematical abilities was mediated by long-term ordinal processes. © 2017 The British Psychological Society.

  11. Work engagement and Machiavellianism in the ethical leadership process

    NARCIS (Netherlands)

    den Hartog, D.N.; Belschak, F.D.

    2012-01-01

    Leaders who express an ethical identity are proposed to affect followers’ attitudes and work behaviors. In two multi-source studies, we first test a model suggesting that work engagement acts as a mediator in the relationships between ethical leadership and employee initiative (a form of

  12. Development of regulations for water care works and process ...

    African Journals Online (AJOL)

    driniev

    and controlled in a sustainable and equitable manner, for the benefit of all persons and in accordance with its constitutional .... training happen. The proposed regulation. Water care works. Schedules I and II deal with the classification of Water Care Works which are defined as both potable water and wastewater treatment.

  13. Constellation Mission Operation Working Group: ESMO Maneuver Planning Process Review

    Science.gov (United States)

    Moyer, Eric

    2015-01-01

    The Earth Science Mission Operation (ESMO) Project created an Independent Review Board to review our Conjunction Risk evaluation process and Maneuver Planning Process to identify improvements that safely manages mission conjunction risks, maintains ground track science requirements, and minimizes overall hours expended on High Interest Events (HIE). The Review Board is evaluating the current maneuver process which requires support by multiple groups. In the past year, there have been several changes to the processes although many prior and new concerns exist. This presentation will discuss maneuver process reviews and Board comments, ESMO assessment and path foward, ESMO future plans, recent changes and concerns.

  14. Identity work: processes and dynamics of identity formations

    OpenAIRE

    Beech, N.; MacIntosh, R.; McInnes, P.

    2008-01-01

    Our aim is to elucidate a position that takes identity to be dynamic and changeable over time and to propose a conceptualisation that provides a way of mapping alternative imperatives and opportunities for identity work. It is argued that dynamic identity is inherently complex, being constructed through interaction between the self and others. These interactive activities are conceptualised as ‘identity work’ (Sveningsson and Alvesson, 2003). We regard an understanding of identity work to be ...

  15. Application of imaging technology for archaeology researches: framework design for connectivity analysis in pieces of Jomon pottery

    Science.gov (United States)

    Miyata, Kimiyoshi; Yajima, Ryota; Kobayashi, Kenichi

    2013-03-01

    Jomon pottery is one kind of earthenware produced in Jomon period in Japan. Potteries are found by the excavations in archaeological sites, however their original whole shapes have been dismissed because those are broken and separated into small pieces. In the archaeological investigation process, reproduction of the whole shape of the potteries is one of the important and difficult tasks because there are a lot of pieces and the number of combinations among the pieces is huge. In this paper, a framework for an application of the imaging technology is explained at first, then connectivity analysis among the pieces of Jomon potteries is focused on to reduce the number of trial and error to find connectable combinations in the pieces. The authentic pieces are chosen and taken by a digital camera, and each piece in the image is labeled to calculate the statistical information in the analysis of the connectivity. A coefficient showing the connectivity of the pieces is defined and calculated to indicate probability of connection among the pieces in the image. Experimental result showed that the correct pieces could be detected by using the coefficient.

  16. Workers' Health Surveillance in the Meat Processing Industry : Work and Health Indicators Associated with Work Ability

    NARCIS (Netherlands)

    van Holland, Berry J.; Soer, Remko; de Boer, Michiel R.; Reneman, Michiel F.; Brouwer, Sandra

    Background Workers' health surveillance (WHS) programs commonly measure a large number of indicators addressing health habits and health risks. Recently, work ability and functional capacity have been included as important risk measures in WHS. In order to address work ability appropriately,

  17. Workers' Health Surveillance in the Meat Processing Industry: Work and Health Indicators Associated with Work Ability

    NARCIS (Netherlands)

    van Holland, B.J.; Soer, R.; de Boer, M.R.; Reneman, M.F.; Brouwer, S.

    2015-01-01

    Background Workers’ health surveillance (WHS) programs commonly measure a large number of indicators addressing health habits and health risks. Recently, work ability and functional capacity have been included as important risk measures in WHS. In order to address work ability appropriately,

  18. Chromatin structure and pre-mRNA processing work together.

    Science.gov (United States)

    Jimeno-González, Silvia; Reyes, José C

    2016-05-26

    Chromatin is the natural context for transcription elongation. However, the elongating RNA polymerase II (RNAPII) is forced to pause by the positioned nucleosomes present in gene bodies. Here, we briefly discuss the current results suggesting that those pauses could serve as a mechanism to coordinate transcription elongation with pre-mRNA processing. Further, histone post-translational modifications have been found to regulate the recruitment of factors involved in pre-mRNA processing. This view highlights the important regulatory role of the chromatin context in the whole process of the mature mRNA synthesis.

  19. Report of the Working Group on Recruitment Processes (WGRP)

    OpenAIRE

    ICES

    2005-01-01

    Contributor: Richard D. M. Nash The Working Group concentrated on the last Term of Reference and worked toward produc-ing a clear set of guidelines and objectives for the future. The meeting was the day after the International Larval Fish Conference (sponsored by the American Fisheries Society), this year in Barcelona. Both regular members of the WGRP and invites who had attended the confer-ence attended the meeting. The ToR was addressed with three presentations (R. D. M. Nash, IMR, Norwa...

  20. Report of the Working Group on Recruitment Processes (WGRP)

    OpenAIRE

    ICES

    2005-01-01

    The Working Group concentrated on the last Term of Reference and worked toward produc-ing a clear set of guidelines and objectives for the future. The meeting was the day after the International Larval Fish Conference (sponsored by the American Fisheries Society), this year in Barcelona. Both regular members of the WGRP and invites who had attended the confer-ence attended the meeting. The ToR was addressed with three presentations (R. D. M. Nash, IMR, Norway on the biological context in whic...

  1. Social media and communication processes at work : Evidence from China

    NARCIS (Netherlands)

    Ou, C.X.J.; Wong, L.H.M.; Davison, R.M.; Cheng, Z.; Kunifuji, S.; Papadopoulos, G.A.; Skulimowski, A.M.J.

    2014-01-01

    Web 2.0 applications, such as instant messengers and other social media platforms, are fast becoming ubiquitous at work, yet their impact on performance is poorly understood. We investigate these impacts in the Chinese workplace, analyzing data from 179 organizational employees. We find that

  2. Working Memory Strategies during Rational Number Magnitude Processing

    Science.gov (United States)

    Hurst, Michelle; Cordes, Sara

    2017-01-01

    Rational number understanding is a critical building block for success in more advanced mathematics; however, how rational number magnitudes are conceptualized is not fully understood. In the current study, we used a dual-task working memory (WM) interference paradigm to investigate the dominant type of strategy (i.e., requiring verbal WM…

  3. Compliance as process: Work safety in the Chinese construction industry

    NARCIS (Netherlands)

    Li, Na

    2016-01-01

    China is facing a key challenge of achieving compliance in many regulatory areas. Responding to such issue, this research reports on an exploratory empirical study of how the regulated construction businesses comply with work safety rules in China. Building on the existing literature, it develops a

  4. Idea work between object worlds - political process in product development?

    DEFF Research Database (Denmark)

    Gish, Liv; Clausen, Christian

    articles and different websites has been used to gather information about the case We will argue that actors involved in idea work and their interaction such as negotiating different understandings of what constitutes a qualified idea as well as the continuous mobilization of support to their ideas among...

  5. Visual Information Can Hinder Working Memory Processing of Speech

    Science.gov (United States)

    Mishra, Sushmit; Lunner, Thomas; Stenfelt, Stefan; Ronnberg, Jerker; Rudner, Mary

    2013-01-01

    Purpose: The purpose of the present study was to evaluate the new Cognitive Spare Capacity Test (CSCT), which measures aspects of working memory capacity for heard speech in the audiovisual and auditory-only modalities of presentation. Method: In Experiment 1, 20 young adults with normal hearing performed the CSCT and an independent battery of…

  6. Online Group Work Design: Processes, Complexities, and Intricacies

    Science.gov (United States)

    Kleinsasser, Robert; Hong, Yi-Chun

    2016-01-01

    This paper describes the challenges of designing and implementing online group work. We are responsible for a seven-and-a-half week's online literacy and bi-literacy graduate course in a Bilingual/English as a Second Language (BLE/ESL) Master of Arts program. One of the tasks includes online literacy circle exchanges where students are encouraged…

  7. Patterns and Processes of Recruitment and Trafficking into sex Work ...

    African Journals Online (AJOL)

    Using information gathered from Edo and Lagos States of Nigeria, through the use of Case studies, In-depth and key-Informant Interviews, this paper probes the strategies employed by the traffickers and activities that characterize the recruitment and trafficking into sex work. The study found the family to be both facilitators of ...

  8. Neural mechanisms of order information processing in working memory

    Directory of Open Access Journals (Sweden)

    Barbara Dolenc

    2013-11-01

    Full Text Available The ability to encode and maintain the exact order of short sequences of stimuli or events is often crucial to our ability for effective high-order planning. However, it is not yet clear which neural mechanisms underpin this process. Several studies suggest that in comparison with item recognition temporal order coding activates prefrontal and parietal brain regions. Results of various studies tend to favour the hypothesis that the order of the stimuli is represented and encoded on several stages, from primacy and recency estimates to the exact position of the item in a sequence. Different brain regions play a different role in this process. Dorsolateral prefrontal cortex has a more general role in attention, while the premotor cortex is more involved in the process of information grouping. Parietal lobe and hippocampus also play a significant role in order processing as they enable the representation of distance. Moreover, order maintenance is associated with the existence of neural oscillators that operate at different frequencies. Electrophysiological studies revealed that theta and alpha oscillations play an important role in the maintenance of temporal order information. Those EEG oscillations are differentially associated with processes that support the maintenance of order information and item recognition. Various studies suggest a link between prefrontal areas and memory for temporal order, implying that EEG neural oscillations in the prefrontal cortex may play a role in the maintenance of information on temporal order.

  9. The impact of working memory and the "process of process modelling" on model quality: Investigating experienced versus inexperienced modellers

    DEFF Research Database (Denmark)

    Martini, Markus; Pinggera, Jakob; Neurauter, Manuel

    2016-01-01

    the role of cognitive processes as well as modelling processes in creating a PM in experienced and inexperienced modellers. Specifically, two working memory (WM) functions (holding and processing of information and relational integration) and three process of process modelling phases (comprehension...

  10. Work Coordination as a Social Interaction Process in Nursing Staff Meetings

    OpenAIRE

    Eveliina Pennanen; Leena Mikkola

    2016-01-01

    Work coordination, which here refers to organizing, planning, discussing, and negotiating work, is done through social interaction. Because coordination is essential to work quality and well-being at work, it is important to understand the processes that construct work coordination. This study aims to understand work coordination as a social interaction process by analyzing social interaction in nursing staff meetings of a Finnish hospital. Observations and approaches of inductive...

  11. Process-Play: A Simulation Procedure for Group Work Training.

    Science.gov (United States)

    Brenner, Viktor

    1999-01-01

    Describes process-play, an experiential training group structure that addresses the dilemma between participation in a training group and a student's right to privacy. Students participate in group training through a mask, whereby they differentially respond to certain group members on the basis of superficial characteristics. Introduces…

  12. Improving work processes by making the invisible visible

    NARCIS (Netherlands)

    Bakker, A.; Hoyles, C.; Kent, P.; Noss, R.

    2012-01-01

    There is a growing movement for industrial companies to modify their production practices according to methodologies collectively known as process improvement. After World War II, Japanese companies such as Toyota developed new manufacturing paradigms (e.g., lean manufacturing) under the guidance of

  13. Software control and system configuration management - A process that works

    Science.gov (United States)

    Petersen, K. L.; Flores, C., Jr.

    1983-01-01

    A comprehensive software control and system configuration management process for flight-crucial digital control systems of advanced aircraft has been developed and refined to insure efficient flight system development and safe flight operations. Because of the highly complex interactions among the hardware, software, and system elements of state-of-the-art digital flight control system designs, a systems-wide approach to configuration control and management has been used. Specific procedures are implemented to govern discrepancy reporting and reconciliation, software and hardware change control, systems verification and validation testing, and formal documentation requirements. An active and knowledgeable configuration control board reviews and approves all flight system configuration modifications and revalidation tests. This flexible process has proved effective during the development and flight testing of several research aircraft and remotely piloted research vehicles with digital flight control systems that ranged from relatively simple to highly complex, integrated mechanizations.

  14. Becoming Otherwise: Piecing Together Foucault's Ethical Project

    OpenAIRE

    Zivanaris, Michalis

    2015-01-01

    Towards the end of his life, Michel Foucault turns his attention to antiquity where he locates an additional process by which the subject is constituted. Technologies of the self comprise an important contribution to the study of subjectivity, however Foucault employs these findings to set out towards a new direction, challenging the way we think about morality. Against a singular truth and a singular way of life as promulgated by western moral theories, Foucault understands his work as a too...

  15. Use of an apparatus for separating magnetic pieces of material

    NARCIS (Netherlands)

    Rem, P.C.; Berkhout, S.P.M.

    2010-01-01

    Using of an apparatus for separating magnetic pieces of scrap-material of a first group from magnetic pieces of scrap- material of a second group, wherein a mixture of pieces of scrap-material from the first group and from the second group is collectively transported with a conveyor to a separating

  16. Piece rates and their effects on health and safety - a literature review.

    Science.gov (United States)

    Johansson, Bo; Rask, Kjell; Stenberg, Magnus

    2010-07-01

    The purpose of this study was to carry out a broad survey and analysis of relevant research articles about piece rate wages and their effects on health and safety that were published internationally until the fall of 2008. The aim was to summarize and describe the state of the art of the research in this field and if possible draw conclusions from the accumulated research results. A total of 75 research articles were examined extensively and 31 of these were found relevant and had sufficient quality to serve the purpose of this study. The findings of these relevant articles are summarized and analyzed in the survey. Since the late 1980s, there has been a change of research focus regarding piece rates and their effects on health and safety. More recent research shows a clear interest for health, musculoskeletal injuries, physical workload, pains and occupational injuries. The previous interest in risk behavior, security and accidents is still there, but no longer dominates the research scene. Although research is still sparse and fragmented, much of the accumulated knowledge about the effects of piece rate work tells us that piece rates in many situations have a negative effect on health and safety. The fact that 27 of the 31 studied articles found negative effects of piece rates on different aspects of health and safety does not prove causality, but together they give very strong support for the hypothesis that in most situations piece rates have negative effects on health and safety. In order to achieve better knowledge about the effects of piece rates in branches where piece rates are regarded problematic, further research is needed and such research has to be designed to meet the specific questions that are to be answered. Copyright 2010 Elsevier Ltd. All rights reserved.

  17. Note onset deviations as musical piece signatures.

    Science.gov (United States)

    Serrà, Joan; Özaslan, Tan Hakan; Arcos, Josep Lluis

    2013-01-01

    A competent interpretation of a musical composition presents several non-explicit departures from the written score. Timing variations are perhaps the most important ones: they are fundamental for expressive performance and a key ingredient for conferring a human-like quality to machine-based music renditions. However, the nature of such variations is still an open research question, with diverse theories that indicate a multi-dimensional phenomenon. In the present study, we consider event-shift timing variations and show that sequences of note onset deviations are robust and reliable predictors of the musical piece being played, irrespective of the performer. In fact, our results suggest that only a few consecutive onset deviations are already enough to identify a musical composition with statistically significant accuracy. We consider a mid-size collection of commercial recordings of classical guitar pieces and follow a quantitative approach based on the combination of standard statistical tools and machine learning techniques with the semi-automatic estimation of onset deviations. Besides the reported results, we believe that the considered materials and the methodology followed widen the testing ground for studying musical timing and could open new perspectives in related research fields.

  18. Note onset deviations as musical piece signatures.

    Directory of Open Access Journals (Sweden)

    Joan Serrà

    Full Text Available A competent interpretation of a musical composition presents several non-explicit departures from the written score. Timing variations are perhaps the most important ones: they are fundamental for expressive performance and a key ingredient for conferring a human-like quality to machine-based music renditions. However, the nature of such variations is still an open research question, with diverse theories that indicate a multi-dimensional phenomenon. In the present study, we consider event-shift timing variations and show that sequences of note onset deviations are robust and reliable predictors of the musical piece being played, irrespective of the performer. In fact, our results suggest that only a few consecutive onset deviations are already enough to identify a musical composition with statistically significant accuracy. We consider a mid-size collection of commercial recordings of classical guitar pieces and follow a quantitative approach based on the combination of standard statistical tools and machine learning techniques with the semi-automatic estimation of onset deviations. Besides the reported results, we believe that the considered materials and the methodology followed widen the testing ground for studying musical timing and could open new perspectives in related research fields.

  19. Supervisors’ experiences with the return-to-work process of hospital workers absent from work due to a health problem

    DEFF Research Database (Denmark)

    Stochkendahl, Mette Jensen; Myburgh, Corrie; Hartvigsen, Jan

    Background: Supervisors are key stakeholders in successful return to work (RTW), because of their daily proximity to workers. The workers’ closest supervisor is ideally positioned to facilitate the RTW process because he/she has first‐hand knowledge of both the worker and the working conditions....... On the other hand supervisors have the potential to hamper the RTW process if they do not have the necessary competencies, means, and level of engagement. In Denmark, formal responsibility for securing the return of a sick listed worker to the workplace lies outside of the workplace, and the workplace...... is not routinely included in the RTW process. Previous research on supervisors’ roles in the RTW process has primarily been conducted in contexts were the workplace has declared organizational responsibility for the RTW process. Consequently, very little is known about supervisors’ role in the unique Danish...

  20. I PLAY AT WORK-ten principles for transforming work processes through gamification.

    Science.gov (United States)

    Oprescu, Florin; Jones, Christian; Katsikitis, Mary

    2014-01-01

    Gamified workplaces could be a positive and innovative solution to addressing contemporary problems in organizations. Such problems include high levels of stress, reduced sense of community, reduced loyalty and rapid changes in the workforce. To better prepare organizations for the future it may be helpful to identify and understand the potential advantages, disadvantages and areas for future research in relationship to the use of gamification for personal and organizational wellbeing. An analysis of research literature across disciplines in combination with expert opinion identified gamified workplaces as a promising strategy for promoting wellbeing. Furthermore, this paper proposes a set of 10 principles (I PLAY AT WORK) that may support gamification efforts. In addition to the value of mapping the present for the benefit of the future, there is also considerable value in reshaping core ideas related to the workplaces. Gamified workplaces can provide opportunities for a more vigorous and strategic inter-disciplinary research agenda that can stimulate investments in the area.

  1. Fractal dimension analysis of complexity in Ligeti piano pieces

    Science.gov (United States)

    Bader, Rolf

    2005-04-01

    Fractal correlation dimensional analysis has been performed with whole solo piano pieces by Gyrgy Ligeti at every 50ms interval of the pieces. The resulting curves of development of complexity represented by the fractal dimension showed up a very reasonable correlation with the perceptional density of events during these pieces. The seventh piece of Ligeti's ``Musica ricercata'' was used as a test case. Here, each new part of the piece was followed by an increase of the fractal dimension because of the increase of information at the part changes. The second piece ``Galamb borong,'' number seven of the piano Etudes was used, because Ligeti wrote these Etudes after studying fractal geometry. Although the piece is not fractal in the strict mathematical sense, the overall structure of the psychoacoustic event-density as well as the detailed event development is represented by the fractal dimension plot.

  2. Reading Comprehension and Working Memory's Executive Processes: An Intervention Study in Primary School Students

    Science.gov (United States)

    Garcia-Madruga, Juan A.; Elosua, Maria Rosa; Gil, Laura; Gomez-Veiga, Isabel; Vila, Jose Oscar; Orjales, Isabel; Contreras, Antonio; Rodriguez, Raquel; Melero, Maria Angeles; Duque, Gonzalo

    2013-01-01

    Reading comprehension is a highly demanding task that involves the simultaneous process of extracting and constructing meaning in which working memory's executive processes play a crucial role. In this article, a training program on working memory's executive processes to improve reading comprehension is presented and empirically tested in two…

  3. From games to gamified workplaces. I PLAY AT WORK principles for transforming work processes through gamification.

    Directory of Open Access Journals (Sweden)

    Florin eOprescu

    2014-01-01

    Full Text Available Gamified workplaces could be a positive and innovative solution to addressing contemporary problems in organisations. Such problems include high levels of stress, reduced sense of community, reduced loyalty and rapid changes in the workforce. To better prepare organisations for the future it may be helpful to identify and understand the potential advantages, disadvantages and areas for future research in relationship to the use of gamification for personal and organisational wellbeing. An analysis of research literature across disciplines in combination with expert opinion identified gamified workplaces as a promising strategy for promoting wellbeing. Furthermore, this paper proposes a set of 10 principles as part of a gamification guiding framework (I PLAY AT WORK. In addition to the value of mapping the present for the benefit of the future, there is also considerable value in reshaping core ideas related to the workplaces. Gamified workplaces can provide opportunities for a more vigorous and strategic inter-disciplinary research agenda that can stimulate investments in the area.

  4. Two-piece hollow bulb obturator

    Directory of Open Access Journals (Sweden)

    Subramaniam Elangovan

    2011-01-01

    Full Text Available There are various types of obturator fabrication achievable by prosthodontist. Maxillectomy, which is a term used by head and neck surgeons and prosthodontists to describe the partial or total removal of the maxilla in patients suffering from benign or malignant neoplasms is a defect for which to provide an effective obturator is a difficult task for the maxillofacial prosthodontist. Multidisciplinary treatment planning is essential to achieve adequate retention and function for the prosthesis. Speech is often unintelligible as a result of the marked defects in articulation and nasal resonance. This paper describes how to achieve the goal for esthetics and phonetics and also describes the fabrication of a hollow obturator by two piece method, which is simple and maybe used as definitive obturator for maximum comfort of the patient.

  5. Social construction of social work identity in the processes of its institutionalisation

    OpenAIRE

    Navrátil, P.; Bajer, P.

    2012-01-01

    The aim of the text is to explain the process of social construction of social work identity / identities, which (the process of social construction) I introduce as an important part in social work institutionalisation. Some social workers think that their work within the frame of their profession has a permanent and unchangeable character. The conception of the permanent and unchangeable character of social work excludes the theory, values and methodology use from possible discussion and ref...

  6. Effects of Children's Working Memory Capacity and Processing Speed on Their Sentence Imitation Performance

    Science.gov (United States)

    Poll, Gerard H.; Miller, Carol A.; Mainela-Arnold, Elina; Adams, Katharine Donnelly; Misra, Maya; Park, Ji Sook

    2013-01-01

    Background: More limited working memory capacity and slower processing for language and cognitive tasks are characteristics of many children with language difficulties. Individual differences in processing speed have not

  7. Work flow of signal processing data of ground penetrating radar case of rigid pavement measurements

    Energy Technology Data Exchange (ETDEWEB)

    Handayani, Gunawan [The Earth Physics and Complex Systems Research Group (Jl. Ganesa 10 Bandung Indonesia) gunawanhandayani@gmail.com (Indonesia)

    2015-04-16

    The signal processing of Ground Penetrating Radar (GPR) requires a certain work flow to obtain good results. Even though the Ground Penetrating Radar data looks similar with seismic reflection data, but the GPR data has particular signatures that the seismic reflection data does not have. This is something to do with coupling between antennae and the ground surface. Because of this, the GPR data should be treated differently from the seismic signal data processing work flow. Even though most of the processing steps still follow the same work flow of seismic reflection data such as: filtering, predictive deconvolution etc. This paper presents the work flow of GPR processing data on rigid pavement measurements. The processing steps start from raw data, de-Wow process, remove DC and continue with the standard process to get rid of noises i.e. filtering process. Some radargram particular features of rigid pavement along with pile foundations are presented.

  8. Improvement of hospital processes through business process management in Qaem Teaching Hospital: A work in progress.

    Science.gov (United States)

    Yarmohammadian, Mohammad H; Ebrahimipour, Hossein; Doosty, Farzaneh

    2014-01-01

    In a world of continuously changing business environments, organizations have no option; however, to deal with such a big level of transformation in order to adjust the consequential demands. Therefore, many companies need to continually improve and review their processes to maintain their competitive advantages in an uncertain environment. Meeting these challenges requires implementing the most efficient possible business processes, geared to the needs of the industry and market segments that the organization serves globally. In the last 10 years, total quality management, business process reengineering, and business process management (BPM) have been some of the management tools applied by organizations to increase business competiveness. This paper is an original article that presents implementation of "BPM" approach in the healthcare domain that allows an organization to improve and review its critical business processes. This project was performed in "Qaem Teaching Hospital" in Mashhad city, Iran and consists of four distinct steps; (1) identify business processes, (2) document the process, (3) analyze and measure the process, and (4) improve the process. Implementing BPM in Qaem Teaching Hospital changed the nature of management by allowing the organization to avoid the complexity of disparate, soloed systems. BPM instead enabled the organization to focus on business processes at a higher level.

  9. Verbal Working Memory in Older Adults: The Roles of Phonological Capacities and Processing Speed

    Science.gov (United States)

    Nittrouer, Susan; Lowenstein, Joanna H.; Wucinich, Taylor; Moberly, Aaron C.

    2016-01-01

    Purpose: This study examined the potential roles of phonological sensitivity and processing speed in age-related declines of verbal working memory. Method: Twenty younger and 25 older adults with age-normal hearing participated. Two measures of verbal working memory were collected: digit span and serial recall of words. Processing speed was…

  10. Sentence Processing in Lewy Body Spectrum Disorder: The Role of Working Memory

    Science.gov (United States)

    Gross, Rachel G.; McMillan, Corey T.; Chandrasekaran, Keerthi; Dreyfuss, Michael; Ash, Sharon; Avants, Brian; Cook, Philip; Moore, Peachie; Libon, David J.; Siderowf, Andrew; Grossman, Murray

    2012-01-01

    Prior work has related sentence processing to executive deficits in non-demented patients with Parkinson's disease (PD). We extended this investigation to patients with dementia with Lewy bodies (DLB) and PD dementia (PDD) by examining grammatical and working memory components of sentence processing in the full range of patients with Lewy body…

  11. The Process of Participatory Ergonomics Simulation in Hospital Work System Design

    DEFF Research Database (Denmark)

    Andersen, Simone Nyholm

    2016-01-01

    Participatory ergonomics simulation (PES) is a method to involve workers in simulation and design of their own future work system. Understanding of the process of PES is crucial in order to plan and facilitate the process towards creating an ergonomics work system design supporting both human well...

  12. Laud and Satire of the Authority during Peruvian Viceroyalty: the Loa al corregidor Valdivieso, an Unknown Piece from the City of Piura (1775

    Directory of Open Access Journals (Sweden)

    Manuel Prendes Guardiola

    2013-11-01

    Full Text Available The present work states the existence of a short theatrical piece represented in 1775 during the celebrations for the coming to power of Matías de Valdivieso as corregidor (crown official of Piura. Prior to the transcription of the text, it summarizes and comments its contents, and identifies its features as typical of the post-Calderon courtier loa (introductory piece gender, conceived not as a laudatory discourse but as a «miniature comedy». Also, it conducts an approximation to the circumstances in which the loa was represented and which explain its conservation in records of a judicial process because of insults against in Piura’s authorities.

  13. Dramatherapy and Family Therapy in Education: Essential Pieces of the Multi-Agency Jigsaw

    Science.gov (United States)

    McFarlane, Penny; Harvey, Jenny

    2012-01-01

    A collaborative therapeutic approach often proves the best way to assess and meet the needs of children experiencing barriers to learning. This book gives a concise overview of drama and family therapy and describes how both therapies can work together to provide essential pieces of the jigsaw of emotional support for troubled children within an…

  14. Perceptional Peculiarities and Selective Attitude of Teenagers towards the Pieces of Traditional Applied and Decorative Arts

    Science.gov (United States)

    Kamak, Abdikarim; Auelbekov, Erzhan; Beisenbekov, Zhalgasbek; Zholdasova, Bibigul; Sadibek, Azhar

    2016-01-01

    The objective of this article is to eliminate the specifics of traditional applied and decorative arts as a special kind of fine arts and the results of the authors' experimental work on revealing of the peculiarities of children's perception of the art pieces. Methods: for revealing the level of the school students' knowledge of the traditional…

  15. The last piece of the ring

    CERN Multimedia

    2008-01-01

    In a sequel to the recent success at CMS, the last section of the LHC beam vacuum system was installed in ATLAS on Monday 16 June. The place where experiment and accelerator meet, the completion of the last part of the continuous 27 km beampipe signals how near the LHC is to the circulation of its first beam. Watch the video! The last section of the LHC beampipe being installed in ATLAS.Although a seemingly simple piece of technology in comparison with the complexity of the detectors, the beampipe is a carefully designed and essential part of both the experiments and the LHC. The section of beam pipe that completed the LHC ring on Monday 16 June is about 20 metres from the centre of ATLAS, very close to where the first magnets of the LHC are located. Unlike the central ATLAS beampipe, which is made of beryllium, the final section is made of stainless steel. An aluminium cone surrounds the stainless steel tube with the super slim...

  16. Model Checking in Bits and Pieces

    Directory of Open Access Journals (Sweden)

    Kedar S. Namjoshi

    2013-09-01

    Full Text Available Fully automated verification of concurrent programs is a difficult problem, primarily because of state explosion: the exponential growth of a program state space with the number of its concurrently active components. It is natural to apply a divide and conquer strategy to ameliorate state explosion, by analyzing only a single component at a time. We show that this strategy leads to the notion of a "split" invariant, an assertion which is globally inductive, while being structured as the conjunction of a number of local, per-component invariants. This formulation is closely connected to the classical Owicki-Gries method and to Rely-Guarantee reasoning. We show how the division of an invariant into a number of pieces with limited scope makes it possible to apply new, localized forms of symmetry and abstraction to drastically simplify its computation. Split invariance also has interesting connections to parametric verification. A quantified invariant for a parametric system is a split invariant for every instance. We show how it is possible, in some cases, to invert this connection, and to automatically generalize from a split invariant for a small instance of a system to a quantified invariant which holds for the entire family of instances.

  17. Influence of limiting working memory resources on contextual facilitation in language processing

    OpenAIRE

    Stewart, Oliver William Thomas

    2014-01-01

    Language processing is a complex task requiring the integration of many different streams of information. Theorists have considered that working memory plays an important role in language processing and that a reduction in available working memory resources will reduce the efficacy of the system. In debate, however, is whether or not there exists a single pool of resources from which all language processes draw, or if the resource pool is functionally fractionated into modular ...

  18. [The use of work process category for Brazilian nurses: a bibliographic analysis].

    Science.gov (United States)

    Fracolli, Lislaine Aparecida; Granja, Gabriela Ferreira

    2005-12-01

    The aim of this study was to identify, in bibliographic production, how Brazilian nurses have been discussed "work process" in nursing practice. The bibliographic research was realized in Lilacs, in a period from January of 1993 to December of 2003, and focus the periodics: Acta Paulista de Enfermagem, Nursing (SP), Revista Brasileira de Enfermagem, Revista da Escola de Enfermagem da USP, Revista latinoamericana de Enfermagem e Revista Texto e contexto de Enfermagem. The key words used were: process and work and care; process and work and nursing. The results show that is small the bibliographic production that using "work process" like a category of analysis of nursing practice, and there are a concentration of this production in articles that focus tools of nursing work In this study were find 40 articles and the most of them was published in Revista Brasileira de Enfermagem in the year of 2000.

  19. The Development of Verbal and Visual Working Memory Processes: A Latent Variable Approach

    Science.gov (United States)

    Koppenol-Gonzalez, Gabriela V.; Bouwmeester, Samantha; Vermunt, Jeroen K.

    2012-01-01

    Working memory (WM) processing in children has been studied with different approaches, focusing on either the organizational structure of WM processing during development (factor analytic) or the influence of different task conditions on WM processing (experimental). The current study combined both approaches, aiming to distinguish verbal and…

  20. Pediatric nurse´s work process: a reality to be transformed

    Directory of Open Access Journals (Sweden)

    Tânia Maria Coelho Leite

    2017-01-01

    Full Text Available to analyze the work process of the pediatric nurse, focusing on the hospitalized child. Methods: this is a qualitative research with 17 nurses of a university public hospital, performed by semi-structured interview and participant observation. The analysis of the data content was based on the referential of the work process in health. Results: the actions of the pediatric nurse indicate that their work is far from the planning of integral and humanized care for the children. It is developed from the biomedical model, predominating technical activities, subordinated to the medical work. The systematization of nursing care is incomplete, and humanizing strategies are rarely used. Conclusion: the work process of the pediatric nurse incorporates little strategies that involve children and parents in the treatment. The nurse is not clear about the complexity of her work object, the hospitalized child, to plan comprehensive actions in their entirety.

  1. Work Coordination as a Social Interaction Process in Nursing Staff Meetings

    Directory of Open Access Journals (Sweden)

    Eveliina Pennanen

    2016-06-01

    Full Text Available Work coordination, which here refers to organizing, planning, discussing, and negotiating work, is done through social interaction. Because coordination is essential to work quality and well-being at work, it is important to understand the processes that construct work coordination. This study aims to understand work coordination as a social interaction process by analyzing social interaction in nursing staff meetings of a Finnish hospital. Observations and approaches of inductive and descriptive qualitative analysis were used to examine eight sequential nursing staff meetings that took place in 2012. The results indicate that work coordination consisted of sense-making information, sense-making action, managing emotions, and managing positions of employees. Work coordination constructs the social reality of the workplace both on the task level and the relational level. Understanding that work coordination is not only a task-oriented process that deals with organizing practical tasks and duties but is also a process of constructing positions and relationships in work communities helps to identify and understand the possibilities that social interaction and its practices, such as workplace meetings, offer. The findings can be applied in the organizational context to evaluate and develop workplace interactions.

  2. [Process of coping with work-family conflicts in dual-income couples with children].

    Science.gov (United States)

    Kohori, Ayako

    2010-08-01

    This study elucidates processes of coping with work-family conflicts in double-income couples with children. Eight stories of dilemmas concerning work-family conflicts were constructed. Regular employees (N=20) were instructed to narrate the parts of the story in which they thought about how to cope with work-family conflict situations. The protocol analyses revealed the following: (a) most people prioritized their home over their jobs when their families encountered difficult situations, and (b) in cases where either spouse had a demanding or difficult job, there were gender differences with regard to the process of coping with work-family conflicts. The implications of these results are discussed.

  3. 75 FR 28051 - Public Workshop: Pieces of Privacy

    Science.gov (United States)

    2010-05-19

    ... SECURITY Office of the Secretary Public Workshop: Pieces of Privacy AGENCY: Privacy Office, DHS. ACTION: Notice announcing public workshop. SUMMARY: The Department of Homeland Security Privacy Office will host a public workshop, ``Pieces of Privacy.'' DATES: The workshop will be held on June 10, 2010, from 8...

  4. A Piece of Paper Falling Faster than Free Fall

    Science.gov (United States)

    Vera, F.; Rivera, R.

    2011-01-01

    We report a simple experiment that clearly demonstrates a common error in the explanation of the classic experiment where a small piece of paper is put over a book and the system is let fall. This classic demonstration is used in introductory physics courses to show that after eliminating the friction force with the air, the piece of paper falls…

  5. CPS Modeling of CNC Machine Tool Work Processes Using an Instruction-Domain Based Approach

    Directory of Open Access Journals (Sweden)

    Jihong Chen

    2015-06-01

    Full Text Available Building cyber-physical system (CPS models of machine tools is a key technology for intelligent manufacturing. The massive electronic data from a computer numerical control (CNC system during the work processes of a CNC machine tool is the main source of the big data on which a CPS model is established. In this work-process model, a method based on instruction domain is applied to analyze the electronic big data, and a quantitative description of the numerical control (NC processes is built according to the G code of the processes. Utilizing the instruction domain, a work-process CPS model is established on the basis of the accurate, real-time mapping of the manufacturing tasks, resources, and status of the CNC machine tool. Using such models, case studies are conducted on intelligent-machining applications, such as the optimization of NC processing parameters and the health assurance of CNC machine tools.

  6. Measurement of Work Processes Using Statistical Process Control: Instructor’s Manual

    Science.gov (United States)

    1987-03-01

    after the fad. Harvard Business Review, 63(1), 64-71. Loeser , E. A. (1983). Management commitment to quality: Rockwell International. Quality Progress, 16...methods used in process quality control. The training materials were developed as a classroom aid for implementing the statistical methods and...techniques described by <, Ishikawa in his Guide to Quality Control; they were designed to teach managers and ’ . workers in Navy industrial activities these

  7. A framework of knowledge creation processes in participatory simulation of hospital work systems

    DEFF Research Database (Denmark)

    Andersen, Simone Nyholm; Broberg, Ole

    2017-01-01

    suggest applying a knowledge creation perspective. The aim of this study was to develop a framework describing the process of how ergonomics knowledge is created in PS. Video recordings from three projects applying PS of hospital work systems constituted the foundation of process mining analysis......Participatory simulation (PS) is a method to involve workers in simulating and designing their own future work system. Existing PS studies have focused on analysing the outcome, and minimal attention has been devoted to the process of creating this outcome. In order to study this process, we...

  8. A framework of knowledge creation processes in participatory simulation of hospital work systems.

    Science.gov (United States)

    Andersen, Simone Nyholm; Broberg, Ole

    2017-04-01

    Participatory simulation (PS) is a method to involve workers in simulating and designing their own future work system. Existing PS studies have focused on analysing the outcome, and minimal attention has been devoted to the process of creating this outcome. In order to study this process, we suggest applying a knowledge creation perspective. The aim of this study was to develop a framework describing the process of how ergonomics knowledge is created in PS. Video recordings from three projects applying PS of hospital work systems constituted the foundation of process mining analysis. The analysis resulted in a framework revealing the sources of ergonomics knowledge creation as sequential relationships between the activities of simulation participants sharing work experiences; experimenting with scenarios; and reflecting on ergonomics consequences. We argue that this framework reveals the hidden steps of PS that are essential when planning and facilitating PS that aims at designing work systems. Practitioner Summary: When facilitating participatory simulation (PS) in work system design, achieving an understanding of the PS process is essential. By applying a knowledge creation perspective and process mining, we investigated the knowledge-creating activities constituting the PS process. The analysis resulted in a framework of the knowledge-creating process in PS.

  9. Implementing New Work Processes at the Royal Norwegian Navy Material Command

    National Research Council Canada - National Science Library

    Birkelund, Morten

    1999-01-01

    ... to solve organizational and technical problems. Using integrated teams, matched technologies, and tailored work processes in several material programs, RNoNMC observed an increase in quality in the form of quicker results with fewer revisions...

  10. The role of personal and key resources in the family-to-work enrichment process.

    Science.gov (United States)

    Tement, Sara

    2014-10-01

    Based on the work-home resources model, the aim of the present research was to test a process model of family-to-work enrichment by examining whether self-efficacy (i.e., personal resource) mediates the relationship between support from one's family and work engagement. Further, it was assumed that positive affectivity (i.e., key resource) moderates the relation between family support and self-efficacy. Using an occupationally heterogeneous sample of Slovenian employees (n = 738), we found support for a mediating effect of self-efficacy as well as for the moderating role of positive affectivity. In general, our results broaden the understanding of work-family enrichment processes and provide support for the work-home resources model. In addition, they point to the relevant role of personal and key resources in work-family interactions. © 2014 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

  11. Nd:YAG capsulotomy rates after use of the AcrySof acrylic three piece and one piece intraocular lenses

    OpenAIRE

    Mian, S I; Fahim, K; Marcovitch, A; Gada, H; Musch, D C; Sugar, A

    2005-01-01

    Background/aim: Acrylic lens size and shape may influence the rate of posterior capsule opacification (PCO) and need for Nd:YAG capsulotomy. The aim of this study is to compare the Nd:YAG capsulotomy rate of the three piece acrylic/PMMA AcrySof MA series lens with the one piece acrylic AcrySof SA series lens.

  12. Comparison of Nd: YAG capsulotomy rate between 1-piece and 3-piece acrylic intraocular lenses: A STROBE-compliant article.

    Science.gov (United States)

    Kim, Sun Young; Chung, Young Kwon; Shin, Hye Young; Lee, Mee Yon; Lee, Young-Chun; Kim, Su-Young

    2017-07-01

    The aim of the study is to compare Nd:YAG capsulotomy rate between acrylic 1- and 3-piece intraocular lenses. Among 924 eyes of 762 patients who received cataract surgery, we selected the 303 patients (404 eyes) implanted with an SN60WF 1-piece intraocular lens (Alcon, Fort Worth, TX) or a YA-60BBR 3-piece intraocular lens (Hoya Co., Tokyo, Japan). For intraindividual comparison, we enrolled the 17 patients implanted with an SN60WF in 1 eye and a YA-60BBR in the contralateral eye. We compared Nd:YAG capsulotomy rate between acrylic 1- and 3-piece intraocular lenses 24 months after the operation. Of the 404 eyes in this study, Nd:YAG capsulotomy was performed in 20 of 268 eyes (7.5%) in the SN60WF 1-piece intraocular lens group and 24 of 136 eyes (17.6%) in the YA-60BBR 3-piece intraocular lens group; the difference was statistically significant (P = .002). Among the 17 patients (34 eyes) who were implanted with 2 different inraocular lenses, Nd:YAG capsulotomy was performed in only 2 eyes (12%) in the SN60WF group and 9 eyes (53%) in the YA-60BBR group; the difference was statistically significant (P = .020).The authors found a significantly greater incidence of Nd:YAG capsulotomy in eyes who received 3-piece lenses compared with those who received 1-piece lenses.

  13. The Association of Social Work Boards' Licensure Examinations: A Review of Reliability and Validity Processes

    Science.gov (United States)

    Marson, Stephen M.; DeAngelis, Donna; Mittal, Nisha

    2010-01-01

    Objectives: The purpose of this article is to create transparency for the psychometric methods employed for the development of the Association of Social Work Boards' (ASWB) exams. Results: The article includes an assessment of the macro (political) and micro (statistical) environments of testing social work competence. The seven-step process used…

  14. Impact of Noise and Working Memory on Speech Processing in Adults with and without ADHD

    Science.gov (United States)

    Michalek, Anne M. P.

    2012-01-01

    Auditory processing of speech is influenced by internal (i.e., attention, working memory) and external factors (i.e., background noise, visual information). This study examined the interplay among these factors in individuals with and without ADHD. All participants completed a listening in noise task, two working memory capacity tasks, and two…

  15. Children's Verbal Working Memory: Role of Processing Complexity in Predicting Spoken Sentence Comprehension

    Science.gov (United States)

    Magimairaj, Beula M.; Montgomery, James W.

    2012-01-01

    Purpose: This study investigated the role of processing complexity of verbal working memory tasks in predicting spoken sentence comprehension in typically developing children. Of interest was whether simple and more complex working memory tasks have similar or different power in predicting sentence comprehension. Method: Sixty-five children (6- to…

  16. Three roles for textiles as tangible working materials in co-design processes

    DEFF Research Database (Denmark)

    Heimdal, Elisabeth Jacobsen; Rosenqvist, Tanja Schultz

    2012-01-01

    we call tangible working materials to stage the collaboration between the stakeholders engaged as co-designers. Our experience using the tangible working materials showed us that they can be divided into three types, with different attributes and roles in the design process: real, mediating...

  17. Faith, Work, and Praxis: A Process Model of Integration for Christian Student Affairs Administrators

    Science.gov (United States)

    Cliburn Allen, Cara; Alleman, Nathan F.

    2017-01-01

    The scholarship regarding faith integration practice has largely focused on faculty work; however, the field faces a paucity of data-supported approaches to understanding faith integration in the work lives of administrators. In this qualitative study, we developed a conceptual model that employs the concept of praxis to analyze the process by…

  18. Application of SFM and laser scanning technology to the description of mosaics piece by piece

    Directory of Open Access Journals (Sweden)

    O. Ajioka

    2014-06-01

    Full Text Available Mosaic floors of surviving buildings in Ostia have been mainly recorded in photographs. From 2008, Japanese research group carries out a project of 3d measuring of the whole structure of ancient Roman city Ostia using laser scanners, including its landscape, city blocks, streets, buildings, wall paintings and mosaics. The laser scanner allows for a more detailed analysis and a greater potential for recording mosaics. We can record the data of mosaics, which are described piece by piece. However it is hard to acquire enough high dense point cloud and the internal camera of the laser scanner produce low quality images. We introduce a possible technology of 3D recording of mosaics with high-quality colour information; SFM. The use of this technique permits us to create 3D models from images provided from a CCD camera without heavy and large laser scanners. We applied SFM system to different three types of the mosaics laid down on the floors of "the House of the Dioscuroi", "the Insula of the Muse" and "the House of Jove and Ganymede", and created high resolution orthographic images. Then we examined to compare these orthographic images with that are created from the point cloud data. As a result, we confirmed that SFM system has sufficient practical utility for the mosaic research. And we present how much of density of point cloud or ground resolution are required for the documentation of mosaics accurately.

  19. Working Memory and Hearing Aid Processing: Literature Findings, Future Directions, and Clinical Applications.

    Science.gov (United States)

    Souza, Pamela; Arehart, Kathryn; Neher, Tobias

    2015-01-01

    Working memory-the ability to process and store information-has been identified as an important aspect of speech perception in difficult listening environments. Working memory can be envisioned as a limited-capacity system which is engaged when an input signal cannot be readily matched to a stored representation or template. This "mismatch" is expected to occur more frequently when the signal is degraded. Because working memory capacity varies among individuals, those with smaller capacity are expected to demonstrate poorer speech understanding when speech is degraded, such as in background noise. However, it is less clear whether (and how) working memory should influence practical decisions, such as hearing treatment. Here, we consider the relationship between working memory capacity and response to specific hearing aid processing strategies. Three types of signal processing are considered, each of which will alter the acoustic signal: fast-acting wide-dynamic range compression, which smooths the amplitude envelope of the input signal; digital noise reduction, which may inadvertently remove speech signal components as it suppresses noise; and frequency compression, which alters the relationship between spectral peaks. For fast-acting wide-dynamic range compression, a growing body of data suggests that individuals with smaller working memory capacity may be more susceptible to such signal alterations, and may receive greater amplification benefit with "low alteration" processing. While the evidence for a relationship between wide-dynamic range compression and working memory appears robust, the effects of working memory on perceptual response to other forms of hearing aid signal processing are less clear cut. We conclude our review with a discussion of the opportunities (and challenges) in translating information on individual working memory into clinical treatment, including clinically feasible measures of working memory.

  20. Working memory and hearing aid processing: Literature findings, future directions, and clinical applications

    Directory of Open Access Journals (Sweden)

    Pamela eSouza

    2015-12-01

    Full Text Available Working memory—the ability to process and store information—has been identified as an important aspect of speech perception in difficult listening environments. Working memory can be envisioned as a limited-capacity system which is engaged when an input signal cannot be readily matched to a stored representation or template. This mismatch is expected to occur more frequently when the signal is degraded. Because working memory capacity varies among individuals, those with smaller capacity are expected to demonstrate poorer speech understanding when speech is degraded, such as in background noise. However, it is less clear whether (and how working memory should influence practical decisions, such as hearing treatment. Here, we consider the relationship between working memory capacity and response to specific hearing aid processing strategies. Three types of signal processing are considered, each of which will alter the acoustic signal: fast-acting wide-dynamic range compression, which smooths the amplitude envelope of the input signal; digital noise reduction, which may inadvertently remove speech signal components as it suppresses noise; and frequency compression, which alters the relationship between spectral peaks. For fast-acting wide-dynamic range compression, a growing body of data suggests that individuals with smaller working memory capacity may be more susceptible to such signal alterations, and may receive greater amplification benefit with low alteration processing. While the evidence for a relationship between wide-dynamic range compression and working memory appears robust, the effects of working memory on perceptual response to other forms of hearing aid signal processing are less clear cut. We conclude our review with a discussion of the opportunities (and challenges in translating information on individual working memory into clinical treatment, including clinically-feasible measures of working memory.

  1. Meaning of work and the process of returning after head and neck cancer.

    Science.gov (United States)

    Isaksson, Joakim; Wilms, Torben; Laurell, Göran; Fransson, Per; Ehrsson, Ylva Tiblom

    2016-01-01

    The purposes of this study were (1) to investigate employment status at diagnosis, sick leave, and returning to work patterns in correlation to quality of life, anxiety, and depression in patients treated for head and neck cancer (HNC) and (2) to explore patients' experiences of the process of returning to work. Sixty-six patients with HNC (aged 34-66 years) were repeatedly interviewed over a period of 24 months. Interview responses that concerned the patients' experiences and ideas about work were categorised using the similarities-differences technique. Questionnaires on quality of life, anxiety, and depression were used to describe the patient characteristics and the differences between groups. In total, 53% of the patients had returned to work at 24 months after treatment, and 17% were deceased. Several quality of life parameters were significantly worse for patients not working at 24 months after treatment. Nine categories were found to describe the return-to-work process starting with symptoms causing sick leave, thoughts about the sick leave, and ending with the return to work and/or retirement. Returning to work is an important part of life because it structures everyday life and strengthens the individual's identity. The quality of life results showed significant differences between workers and non-workers at the 24-month follow-up. The patients need to be both physically and mentally prepared for the process of returning to work. It is important to take an individual rehabilitation approach to guide and support the patients in returning to work and regaining an important aspect of their everyday life. In such an approach, it is vital to understand the patients' overall life context and the patients' own perspective on the process and meaning associated with work.

  2. Proficiency and Working Memory Based Explanations for Nonnative Speakers' Sensitivity to Agreement in Sentence Processing

    Science.gov (United States)

    Coughlin, Caitlin E.; Tremblay, Annie

    2013-01-01

    This study examines the roles of proficiency and working memory (WM) capacity in second-/foreign-language (L2) learners' processing of agreement morphology. It investigates the processing of grammatical and ungrammatical short- and long-distance number agreement dependencies by native English speakers at two proficiencies in French, and the…

  3. The Influence of Levels of Processing on Recall from Working Memory and Delayed Recall Tasks

    Science.gov (United States)

    Loaiza, Vanessa M.; McCabe, David P.; Youngblood, Jessie L.; Rose, Nathan S.; Myerson, Joel

    2011-01-01

    Recent research in working memory has highlighted the similarities involved in retrieval from complex span tasks and episodic memory tasks, suggesting that these tasks are influenced by similar memory processes. In the present article, the authors manipulated the level of processing engaged when studying to-be-remembered words during a reading…

  4. Injury risk at the work processes in fishing: a case-referent study

    DEFF Research Database (Denmark)

    Jensen, Olaf C

    2006-01-01

    -ratios for the main work processes in commercial fishing. A case-referent design with samples of person-time was used. The reported injuries to the National Maritime Authorities for a 5-year period for four types of commercial fishing defined the cases. The odds for the referents were calculated from samples...... types of fishing. The OR's for traffic on board was 15.3 (12.0-19.4). The variations in the odds ratios indicate that the fishermen continuously shift between low and high-risk areas pointing out areas for prevention. The case-referent design with samples of person-time is useful for other areas...... of person-times for the specific working processes. Odds Ratios (OR) and 95% confidence intervals (95% CI) were calculated for the specific working processes. A total of 560 cases were included and the samples of referent working periods were 63110 min in total. The largest part of the injuries (n = 318...

  5. The impact of working memory and the "process of process modelling" on model quality: Investigating experienced versus inexperienced modellers.

    Science.gov (United States)

    Martini, Markus; Pinggera, Jakob; Neurauter, Manuel; Sachse, Pierre; Furtner, Marco R; Weber, Barbara

    2016-05-09

    A process model (PM) represents the graphical depiction of a business process, for instance, the entire process from online ordering a book until the parcel is delivered to the customer. Knowledge about relevant factors for creating PMs of high quality is lacking. The present study investigated the role of cognitive processes as well as modelling processes in creating a PM in experienced and inexperienced modellers. Specifically, two working memory (WM) functions (holding and processing of information and relational integration) and three process of process modelling phases (comprehension, modelling, and reconciliation) were related to PM quality. Our results show that the WM function of relational integration was positively related to PM quality in both modelling groups. The ratio of comprehension phases was negatively related to PM quality in inexperienced modellers and the ratio of reconciliation phases was positively related to PM quality in experienced modellers. Our research reveals central cognitive mechanisms in process modelling and has potential practical implications for the development of modelling software and teaching the craft of process modelling.

  6. Performance evaluation of coating materials and process ...

    African Journals Online (AJOL)

    austenitic stainless steel work pieces, on computer numerical controlled (CNC) lathe. Taguchi's Design of Experiments approach (DOE) is used to analyze the effect of process parameters on surface roughness to obtain their optimal setting. The analysis of variance (ANOVA) is employed to analyze the influence of process ...

  7. Classification of working processes to facilitate occupational hazard coding on industrial trawlers

    DEFF Research Database (Denmark)

    Jensen, Olaf C; Stage, Søren; Noer, Preben

    2003-01-01

    BACKGROUND: Commercial fishing is an extremely dangerous economic activity. In order to more accurately describe the risks involved, a specific injury coding based on the working process was developed. METHOD: Observation on six different types of vessels was conducted and allowed a description...... and a classification of the principal working processes on all kinds of vessels and a detailed classification for industrial trawlers. In industrial trawling, fish are landed for processing purposes, for example, for the production of fish oil and fish meal. The classification was subsequently used to code...

  8. The Iterative Design Process in Research and Development: A Work Experience Paper

    Science.gov (United States)

    Sullivan, George F. III

    2013-01-01

    The iterative design process is one of many strategies used in new product development. Top-down development strategies, like waterfall development, place a heavy emphasis on planning and simulation. The iterative process, on the other hand, is better suited to the management of small to medium scale projects. Over the past four months, I have worked with engineers at Johnson Space Center on a multitude of electronics projects. By describing the work I have done these last few months, analyzing the factors that have driven design decisions, and examining the testing and verification process, I will demonstrate that iterative design is the obvious choice for research and development projects.

  9. The Impact of Project Work and the Writing Process Method on Writing Production

    Directory of Open Access Journals (Sweden)

    Marcela Díaz Ramírez

    2014-10-01

    Full Text Available This article presents the outcomes of an investigation whose main goal was to implement the methodology of project work and a process approach in order to improve writing production in an English class of Colombian university students since their diagnostic tests showed that their written production had the lowest score. Based on data collected, four factors were developed in the process of learning to write when project work and the writing process method are implemented: accuracy, fluency, integrative language skills, and a positive perception towards writing.

  10. Spatial data infrastructures at work analysing the spatial enablement of public sector processes

    CERN Document Server

    Dessers, Ezra

    2013-01-01

    In 'Spatial Data Infrastructures at Work', Ezra Dessers introduces spatial enablement as a key concept to describe the realisation of SDI objectives in the context of individual public sector processes. Drawing on four years of research, Dessers argues that it has become essential, even unavoidable, to manage and (re)design inter-organisational process chains in order to further advance the role of SDIs as an enabling platform for a spatially enabled society. Detailed case studies illustrate that the process he describes is the setting in which one can see the SDI at work.

  11. RETAINED STONE PIECE IN ANTERIOR CHAMBER

    Directory of Open Access Journals (Sweden)

    ZvornicaninJasmin, Nadarevic-VodencarevicAmra

    2015-04-01

    Full Text Available ABSTRACT We read with interest the article by Surekha et al. regarding the retained stone piece in anterior chamber. Similar to the results of previous studies, the authors found that delayed intraocular foreign body (IOFB management can result in good visual outcome without an apparent increased risk of endophthalmitis or other deleterious side effects. However, the authors failed to explain the exact reason for the diminution of vision in patients left eye. It is unclear what the uncorrected visual acuity was and what kind of correction was used, more precisely type and amount of cylinder, given the presence of the corneal opacity. Since the size of the IOFB is approximately 4x4x1mm, significant irido-corneal angle changes resulting in intraocular pressure raise and optic nerve head damage can be expected. Traumatic glaucoma following open globe injury can occur in 2.7 to 19% of cases, with several risk factors associated with glaucoma development (advanced age, poor visual acuity at presentation,perforating rather than penetrating ocular injury,lens injury, presence of vitreous hemorrhage and presence of an IOFB. Earlier reportsof latetraumaticoptic neuropathy onset, even after several years, indicate that this possibility cannot be completely ruled out too. Therefore, repeated intraocular pressure measurements, gonioscopy, pupillary reaction assessment, together with through posterior segment examination including visual field and optical coherence tomography examinations can be useful in determining the possible optic nerve damage as one of the possible reasons for visual acuity reduction. The authors did not suggest any operative treatment at this time. However, it should bear in mind that the inert anterior chamber IOFB could be a risk factor for non-infectious endophthalmitis development even after many years. Also, long term retained anterior chamber foreign body leads to permanent endothelial cell loss and can even result in a corneal

  12. TERROR IN A THREE PIECE SUIT and ORCHIS. Music Scores

    OpenAIRE

    Belousova, Sofya

    2012-01-01

    ABSTRACT OF THE THESISTERROR IN A THREE PIECE SUITandORCHISMUSIC SCORESbySofya BelousovaMaster of Arts in Music University of California, Los Angeles, 2012 Professor Ian Krouse, ChairMy Master's Thesis revolves around "Terror In A Three Piece Suit", a short animated film, and an excerpt from "Orchis", a contemporary ballet. TERROR IN A THREE PIECE SUIT is a wonderful short animated film directed by Ariel Goldberg. The film develops the story of a clerk with an overactive mind who imagines mon...

  13. Dissecting the journey: nursing student experiences with collaboration during the group work process.

    Science.gov (United States)

    Gagnon, Lissa L; Roberge, Ginette D

    2012-11-01

    Since the outset of nursing care, group work processes have evolved into essential components of a nurse's role and responsibilities within the health care system. To reflect this trend, group work is often utilized as a medium to promote professional socialization in undergraduate nursing curricula. The purpose of this qualitative study was to explore the ways undergraduate nursing students experience collaboration during group work activities. Braun and Clarke's (2006) theoretical thematic analysis combined with Pollio et al.'s (2006) interpretive framework was utilized to capture the students' lived experiences regarding group work. The participants of this study consisted of 96 undergraduate students enrolled in a nursing program in Canada. Written descriptions of their perceptions of their group work practices were analyzed to determine the extent to which these adhere to the collaborative practice essential elements (Jones and Way, 2006). Analysis of the results revealed an unexpected element of collaboration that of the psychosocial element in group work. The results from this study expose advantages and disadvantages of group work processes during group work in nursing education. This type of insight is valuable for educators to prepare nursing students for the complex demands of working with interdisciplinary teams. Copyright © 2011. Published by Elsevier Ltd.

  14. How work context affects operating room processes: using data mining and computer simulation to analyze facility and process design.

    Science.gov (United States)

    Baumgart, André; Denz, Christof; Bender, Hans-Joachim; Schleppers, Alexander

    2009-01-01

    The complexity of the operating room (OR) requires that both structural (eg, department layout) and behavioral (eg, staff interactions) patterns of work be considered when developing quality improvement strategies. In our study, we investigated how these contextual factors influence outpatient OR processes and the quality of care delivered. The study setting was a German university-affiliated hospital performing approximately 6000 outpatient surgeries annually. During the 3-year-study period, the hospital significantly changed its outpatient OR facility layout from a decentralized (ie, ORs in adjacent areas of the building) to a centralized (ie, ORs in immediate vicinity of each other) design. To study the impact of the facility change on OR processes, we used a mixed methods approach, including process analysis, process modeling, and social network analysis of staff interactions. The change in facility layout was seen to influence OR processes in ways that could substantially affect patient outcomes. For example, we found a potential for more errors during handovers in the new centralized design due to greater interdependency between tasks and staff. Utilization of the mixed methods approach in our analysis, as compared with that of a single assessment method, enabled a deeper understanding of the OR work context and its influence on outpatient OR processes.

  15. Working conditions and effects of ISO 9000 in six furniture-making companies: implementation and processes.

    Science.gov (United States)

    Karltun, J; Axelsson, J; Eklund, J

    1998-08-01

    What effects will the implementation of the quality standard ISO 9000 have regarding working conditions and competitive advantages? Which are the most important change process characteristics for assuring improved working conditions and other desired effects? These are the main questions behind this study of six furniture-making companies which implemented ISO 9000 during the period 1991-1994. The results show that customer requirement was the dominant goal to implement ISO 9000. Five of the six companies succeeded in gaining certification. The influence on working conditions was limited, but included better order and housekeeping, more positive attitudes towards discussing quality shortcomings, a few workplace improvements, work enrichment caused by additional tasks within the quality system and a better understanding of external customer demands. Among the negative effects were new, apparently meaningless, tasks for individual workers as well as more stress and more physically strenuous work. The effects on the companies included a decrease in external quality-related costs and improved delivery precision. The study confirms the importance for efficient change of the design of the change process, and identifies 'improvement methodology' as the most important process characteristic. Improved working conditions are enhanced by added relevant strategic goals and by a participative implementation process.

  16. [Higher education in nursing: the faculty work process in different institutional contexts].

    Science.gov (United States)

    Leonello, Valéria Marli; Oliveira, Maria Amélia de Campos

    2014-12-01

    To analyze the characteristics of faculty work in nursing higher education. An exploratory qualitative study with a theoretical-methodological framework of dialectical and historical materialism. The faculty work process was adopted as the analytical category, grounded on conceptions of work and professionalism. Semi-structured interviews were conducted with 24 faculty members from three higher education institutions in the city of São Paulo, classified according to the typology of institutional contexts. The faculty members at these higher education institutions are a heterogeneous group, under different working conditions. Intensification and precarious conditions of the faculty work is common to all three contexts, although there are important distinctions in the practices related to teaching, research and extension. Faculty professionalization can be the starting point for analyzing and coping with such a distinct reality of faculty work and practice.


  17. Higher education in nursing: the faculty work process in different institutional contexts

    Directory of Open Access Journals (Sweden)

    Valéria Marli Leonello

    2014-12-01

    Full Text Available Objective To analyze the characteristics of faculty work in nursing higher education. Method An exploratory qualitative study with a theoretical-methodological framework of dialectical and historical materialism. The faculty work process was adopted as the analytical category, grounded on conceptions of work and professionalism. Semi-structured interviews were conducted with 24 faculty members from three higher education institutions in the city of São Paulo, classified according to the typology of institutional contexts. Results The faculty members at these higher education institutions are a heterogeneous group, under different working conditions. Intensification and precarious conditions of the faculty work is common to all three contexts, although there are important distinctions in the practices related to teaching, research and extension. Conclusion Faculty professionalization can be the starting point for analyzing and coping with such a distinct reality of faculty work and practice.

  18. The relation between working memory capacity and auditory lateralization in children with auditory processing disorders.

    Science.gov (United States)

    Moossavi, Abdollah; Mehrkian, Saiedeh; Lotfi, Yones; Faghihzadeh, Soghrat; sajedi, Hamed

    2014-11-01

    Auditory processing disorder (APD) describes a complex and heterogeneous disorder characterized by poor speech perception, especially in noisy environments. APD may be responsible for a range of sensory processing deficits associated with learning difficulties. There is no general consensus about the nature of APD and how the disorder should be assessed or managed. This study assessed the effect of cognition abilities (working memory capacity) on sound lateralization in children with auditory processing disorders, in order to determine how "auditory cognition" interacts with APD. The participants in this cross-sectional comparative study were 20 typically developing and 17 children with a diagnosed auditory processing disorder (9-11 years old). Sound lateralization abilities investigated using inter-aural time (ITD) differences and inter-aural intensity (IID) differences with two stimuli (high pass and low pass noise) in nine perceived positions. Working memory capacity was evaluated using the non-word repetition, and forward and backward digits span tasks. Linear regression was employed to measure the degree of association between working memory capacity and localization tests between the two groups. Children in the APD group had consistently lower scores than typically developing subjects in lateralization and working memory capacity measures. The results showed working memory capacity had significantly negative correlation with ITD errors especially with high pass noise stimulus but not with IID errors in APD children. The study highlights the impact of working memory capacity on auditory lateralization. The finding of this research indicates that the extent to which working memory influences auditory processing depend on the type of auditory processing and the nature of stimulus/listening situation. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  19. Electrocortical consequences of image processing: The influence of working memory load and worry.

    Science.gov (United States)

    White, Evan J; Grant, DeMond M

    2017-03-30

    Research suggests that worry precludes emotional processing as well as biases attentional processes. Although there is burgeoning evidence for the relationship between executive functioning and worry, more research in this area is needed. A recent theory suggests one mechanism for the negative effects of worry on neural indicators of attention may be working memory load, however few studies have examined this directly. The goal of the current study was to document the influence of both visual and verbal working memory load and worry on attention allocation during processing of emotional images in a cued image paradigm. It was hypothesized that working memory load will decrease attention allocation during processing of emotional images. This was tested among 38 participants using a modified S1-S2 paradigm. Results indicated that both the visual and verbal working memory tasks resulted in a reduction of attention allocation to the processing of images across stimulus types compared to the baseline task, although only for individuals low in worry. These data extend the literature by documenting decreased neural responding (i.e., LPP amplitude) to imagery both the visual and verbal working memory load, particularly among individuals low in worry. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  20. Phonological working memory and auditory processing speed in children with specific language impairment

    Directory of Open Access Journals (Sweden)

    Fatemeh Haresabadi

    2015-02-01

    Full Text Available Background and Aim: Specific language impairment (SLI, one variety of developmental language disorder, has attracted much interest in recent decades. Much research has been conducted to discover why some children have a specific language impairment. So far, research has failed to identify a reason for this linguistic deficiency. Some researchers believe language disorder causes defects in phonological working memory and affects auditory processing speed. Therefore, this study reviews the results of research investigating these two factors in children with specific language impairment.Recent Findings: Studies have shown that children with specific language impairment face constraints in phonological working memory capacity. Memory deficit is one possible cause of linguistic disorder in children with specific language impairment. However, in these children, disorder in information processing speed is observed, especially regarding the auditory aspect.Conclusion: Much more research is required to adequately explain the relationship between phonological working memory and auditory processing speed with language. However, given the role of phonological working memory and auditory processing speed in language acquisition, a focus should be placed on phonological working memory capacity and auditory processing speed in the assessment and treatment of children with a specific language impairment.

  1. Meaning of work and the returning process after breast cancer: a longitudinal study of 56 women.

    Science.gov (United States)

    Lilliehorn, Sara; Hamberg, Katarina; Kero, Anneli; Salander, Pär

    2013-06-01

    An increasing number of women survive breast cancer and a majority return to work. However, findings based on mean values may conceal individual processes that need to be better understood to discuss meaningful rehabilitation. The purpose of this study is to describe the sick-leave pattern of a group of Swedish women with primary breast cancer but foremost to explore their ideas about what motivates and discourages their return to work. Fifty-six women were repeatedly interviewed over a period of 18-24 months. Interview sections that clearly illustrated the women's experiences and ideas about work were categorized using the comparative similarities-differences technique. The average length of sick leave was 410 days (range 0-942). Six months after the first day of sick leave, 29% worked at least their previous service grade. At 12 months, 55% and at 18 months 57% did so. Those treated with chemotherapy had in average more than twice as large sick leave as those who did not. Three categories emerged. 'Motives for not returning to work' consists of four subcategories: 'I'm still too fragile to return to work'; 'My workplace is a discouraging place'; 'I took an opportunity to pause' and 'I've lost the taste for work'. 'Motives for returning' consists of two sub-categories: 'Work generates and structures my everyday life' and 'I miss my workplace'. Finally, 'Transition in work approach' reflects a changed approach to work. The meaning of work varies over time, but first and foremost work was regarded as an important part of the healing process as it restores the disruption of everyday life. Guidelines cannot be reduced to a linear relationship with biomedical variables but the individual context of everyday life must be considered. © 2012 Nordic College of Caring Science.

  2. Influence of tools geometry and processing conditions on behavior of a difficult-to-work Al-Mg alloy during equal channel angular pressing

    Science.gov (United States)

    Comǎneci, Radu Ioachim; Nedelcu, Dumitru; Bujoreanu, Leandru Gheorghe

    2017-10-01

    Equal channel angular pressing (ECAP) is a well-established method for grain refinement in metallic materials by large shear plastic deformation, being the most promising and effective severe plastic deformation (SPD) technique. ECAP is a discontinuous process, so the billet removal implies a new development of the procedure: the new sample pushes out the previous sample. In resuming the process the head and the tail ends of the work piece which becomes strongly distorted and receiving different amount of strain have to be removed. Due to the path difference in material flow between upper and lower region of the outlet channel, a non-uniform strain and stress distribution across the width of the workpiece leaving the plastic deformation zone (PDZ) is achieved. A successful ECAP requires surpassing two obstacles: the necessary load level which directly affects tools and a favorable stress distribution so the material withstanding the accumulated strain of repeated deformation. Under back pressure (BP), materials have shown to be able to withstand more passes. As soon as the billet passes the PDZ along the bisector plane of the two channels, the compressive mean stress changes to tensile (leading to crack initiation), while in the presence of BP, a negative (compressive) stress is applied during the process. In this paper a comparative tridimensional finite element analysis (FEA) is performed to evaluate the behavior of a difficult-to-work Al-Mg alloy depending on tools geometry and process parameters. The results in terms of load level and strain distribution show the influence of the punch geometry and BP on the material behavior.

  3. One-Piece Faraday Generator: A Paradoxical Experiment from 1851

    Science.gov (United States)

    Crooks, M. J.; And Others

    1978-01-01

    Describes an experiment based on Faraday's one-piece generator, where the rotating disk is replaced by a cylindrical permanent magnet. Explains the apparent paradox that an observer in an inertial frame could measure his absolute velocity. (GA)

  4. Effects of dopamine-related gene-gene interactions on working memory component processes.

    Science.gov (United States)

    Stelzel, Christine; Basten, Ulrike; Montag, Christian; Reuter, Martin; Fiebach, Christian J

    2009-03-01

    Dopamine modulates complex cognitive functions like working memory and cognitive control. It is widely accepted that an optimal level of prefrontal dopamine supports working memory performance. In the present study we used a molecular genetic approach to test whether the optimal activity of the dopamine system for different component processes of working memory is additionally related to the availability of dopamine D2 receptors. We sought evidence for this assumption by investigating the interaction effect (epistasis) of variations in two dopaminergic candidate genes: the catechol-O-methyltransferase (COMT) Val(158)Met polymorphism, which has been shown to influence prefrontal dopamine concentration, and the DRD2/ANKK1-Taq-Ia polymorphism, which has been related to the density of D2 receptors. Our results show that COMT effects on working memory performance are modulated by the DRD2/ANKK1-TAQ-Ia polymorphism and the specific working memory component process under investigation. Val-participants--supposedly characterized by increased prefrontal dopamine concentrations--outperformed Val+ participants in the manipulation of working memory contents, but only when D2 receptor density could be considered to be high. No such effect was present for passive maintenance of working memory contents or for maintenance in the face of distracting information. This beneficial effect of a balance between prefrontal dopamine availability and D2 receptor density reveals the importance of considering epistasis effects and different working memory subprocesses in genetic association studies.

  5. Employer, use of personal protective equipment, and work safety climate: Latino poultry processing workers.

    Science.gov (United States)

    Arcury, Thomas A; Grzywacz, Joseph G; Anderson, Andrea M; Mora, Dana C; Carrillo, Lourdes; Chen, Haiying; Quandt, Sara A

    2013-02-01

    This analysis describes the work safety climate of Latino poultry processing workers and notes differences by worker personal characteristics and employer; describes the use of common personal protective equipment (PPE) among workers; and examines the associations of work safety climate with use of common PPE. Data are from a cross-sectional study of 403 Latino poultry processing workers in western North Carolina. Work safety climate differed little by personal characteristics, but it did differ consistently by employer. Provision of PPE varied; for example, 27.2% of participants were provide with eye protection at no cost, 57.0% were provided with hand protection at no cost, and 84.7% were provided with protective clothing at no cost. PPE use varied by type. Provision of PPE at no cost was associated with lower work safety climate; this result was counter-intuitive. Consistent use of PPE was associated with higher work safety climate. Work safety climate is important for improving workplace safety for immigrant workers. Research among immigrant workers should document work safety climate for different employers and industries, and delineate how work safety climate affects safety behavior and injuries. Copyright © 2012 Wiley Periodicals, Inc.

  6. Cognitive Processing Speed, Working Memory, and the Intelligibility of Hearing Aid-Processed Speech in Persons with Hearing Impairment

    Directory of Open Access Journals (Sweden)

    Wycliffe Kabaywe Yumba

    2017-08-01

    Full Text Available Previous studies have demonstrated that successful listening with advanced signal processing in digital hearing aids is associated with individual cognitive capacity, particularly working memory capacity (WMC. This study aimed to examine the relationship between cognitive abilities (cognitive processing speed and WMC and individual listeners’ responses to digital signal processing settings in adverse listening conditions. A total of 194 native Swedish speakers (83 women and 111 men, aged 33–80 years (mean = 60.75 years, SD = 8.89, with bilateral, symmetrical mild to moderate sensorineural hearing loss who had completed a lexical decision speed test (measuring cognitive processing speed and semantic word-pair span test (SWPST, capturing WMC participated in this study. The Hagerman test (capturing speech recognition in noise was conducted using an experimental hearing aid with three digital signal processing settings: (1 linear amplification without noise reduction (NoP, (2 linear amplification with noise reduction (NR, and (3 non-linear amplification without NR (“fast-acting compression”. The results showed that cognitive processing speed was a better predictor of speech intelligibility in noise, regardless of the types of signal processing algorithms used. That is, there was a stronger association between cognitive processing speed and NR outcomes and fast-acting compression outcomes (in steady state noise. We observed a weaker relationship between working memory and NR, but WMC did not relate to fast-acting compression. WMC was a relatively weaker predictor of speech intelligibility in noise. These findings might have been different if the participants had been provided with training and or allowed to acclimatize to binary masking noise reduction or fast-acting compression.

  7. Cognitive Processing Speed, Working Memory, and the Intelligibility of Hearing Aid-Processed Speech in Persons with Hearing Impairment.

    Science.gov (United States)

    Yumba, Wycliffe Kabaywe

    2017-01-01

    Previous studies have demonstrated that successful listening with advanced signal processing in digital hearing aids is associated with individual cognitive capacity, particularly working memory capacity (WMC). This study aimed to examine the relationship between cognitive abilities (cognitive processing speed and WMC) and individual listeners' responses to digital signal processing settings in adverse listening conditions. A total of 194 native Swedish speakers (83 women and 111 men), aged 33-80 years (mean = 60.75 years, SD = 8.89), with bilateral, symmetrical mild to moderate sensorineural hearing loss who had completed a lexical decision speed test (measuring cognitive processing speed) and semantic word-pair span test (SWPST, capturing WMC) participated in this study. The Hagerman test (capturing speech recognition in noise) was conducted using an experimental hearing aid with three digital signal processing settings: (1) linear amplification without noise reduction (NoP), (2) linear amplification with noise reduction (NR), and (3) non-linear amplification without NR ("fast-acting compression"). The results showed that cognitive processing speed was a better predictor of speech intelligibility in noise, regardless of the types of signal processing algorithms used. That is, there was a stronger association between cognitive processing speed and NR outcomes and fast-acting compression outcomes (in steady state noise). We observed a weaker relationship between working memory and NR, but WMC did not relate to fast-acting compression. WMC was a relatively weaker predictor of speech intelligibility in noise. These findings might have been different if the participants had been provided with training and or allowed to acclimatize to binary masking noise reduction or fast-acting compression.

  8. Work process and task-based design of intelligent assistance systems in German textile industry

    Science.gov (United States)

    Löhrer, M.; Ziesen, N.; Altepost, A.; Saggiomo, M.; Gloy, Y. S.

    2017-10-01

    The mid-sized embossed German textile industry must face social challenges e.g. demographic change or technical changing processes. Interaction with intelligent systems (on machines) and increasing automation changes processes, working structures and employees’ tasks on all levels. Work contents are getting more complex, resulting in the necessity for diversified and enhanced competencies. Mobile devices like tablets or smartphones are increasingly finding their way into the workplace. Employees who grew up with new forms of media have certain advantages regarding the usage of modern technologies compared to older employees. Therefore, it is necessary to design new systems which help to adapt the competencies of both younger and older employees to new automated production processes in the digital work environment. The key to successful integration of technical assistance systems is user-orientated design and development that includes concepts for competency development under consideration of, e.g., ethical and legal aspects.

  9. The undescended testis: Putting the pieces together

    NARCIS (Netherlands)

    van der Plas, E.M.

    2014-01-01

    This thesis deals with various aspects of acquired undescended testes. The aim of the work presented in this thesis is to elucidate different aspects of acquired undescended testes and how this should be treated. Additionally, a practical reference chart of normal testicular volumes for 0 to 18 year

  10. Thalamic mediodorsal nucleus and its participation in spatial working memory processes: comparison with the prefrontal cortex

    Science.gov (United States)

    Funahashi, Shintaro

    2013-01-01

    Working memory is a dynamic neural system that includes processes for temporarily maintaining and processing information. Working memory plays a significant role in a variety of cognitive functions, such as thinking, reasoning, decision-making, and language comprehension. Although the prefrontal cortex (PFC) is known to play an important role in working memory, several lines of evidence indicate that the thalamic mediodorsal nucleus (MD) also participates in this process. While monkeys perform spatial working memory tasks, MD neurons exhibit directionally selective delay-period activity, which is considered to be a neural correlate for the temporary maintenance of information in PFC neurons. Studies have also shown that, while most MD neurons maintain prospective motor information, some maintain retrospective sensory information. Thus, the MD plays a greater role in prospective motor aspects of working memory processes than the PFC, which participates more in retrospective aspects. For the performance of spatial working memory tasks, the information provided by a sensory cue needs to be transformed into motor information to give an appropriate response. A population vector analysis using neural activities revealed that, although the transformation of sensory-to-motor information occurred during the delay period in both the PFC and the MD, PFC activities maintained sensory information until the late phase of the delay period, while MD activities initially represented sensory information but then started to represent motor information in the earlier phase of the delay period. These results indicate that long-range neural interactions supported by reciprocal connections between the MD and the PFC could play an important role in the transformation of maintained information in working memory processes. PMID:23914160

  11. The direction of word stress processing in German: evidence from a working memory paradigm

    OpenAIRE

    Frank eDomahs; Marion eGrande; Walter eHuber; Ulrike eDomahs

    2014-01-01

    There are contradicting assumptions and findings on the direction of word stress processing in German. To resolve this question, we asked participants to read tri-syllabic nonwords and stress ambiguous words aloud. Additionally, they also performed a working memory task (2-back task). In nonword reading, participants’ individual working memory capacity was positively correlated with assignment of main stress to the antepenultimate syllable, which is most distant to the word’s right edge, whil...

  12. Working Capital Management in the Process of Financial Support of the “Green Building” Projects

    Directory of Open Access Journals (Sweden)

    Trebukhin Anatoliy

    2017-01-01

    Full Text Available The article presents analysis of working capital in the financial support of the “green building” projects, factors which influence the choice of working capital management model were analyzed, reasons for changes in necessity of current assets values in the process of construction. Scheme of interconnections of manufacturing, operational and financial activity cycles of enterprises, which implementing the “green building” projects was developed and comparative characteristics of the sources of their funding was performed.

  13. Contribution of underlying processes to improved visuospatial working memory associated with physical activity

    Directory of Open Access Journals (Sweden)

    Qingchun Ji

    2017-06-01

    Full Text Available Background Working memory is critical for various cognitive processes and can be separated into two stages: short-term memory storage and manipulation processing. Although previous studies have demonstrated that increased physical activity (PA improves working memory and that males outperform females on visuospatial working memory tasks, few studies have determined the contribution of the two underlying stages to the visuospatial working memory improvement associated with PA. Thus, the aims of the present study were to verify the relationship between physical activity and visuospatial working memory, determine whether one or both stages were affected by PA, and investigate any sex differences. Methods A total of 56 undergraduate students were recruited for this study. Their scores on the International Physical Activity Questionnaire (IPAQ were used to separate them into either a lower PA (n = 26; IPAQ score ≤3,000 metabolic equivalent [MET]-min/week or higher PA (n = 30; IPAQ score >3,000 MET-min/week group. Participants were required to complete three tasks: a visuospatial working memory task, a task that examines the short-term memory storage stage, and a mental rotation task that examines the active manipulation stage. Results Participants in the higher PA group maintained similar accuracy but displayed significantly faster reaction times (RT than those in the lower PA group on the visuospatial working memory and manipulation tasks. By contrast, no difference was observed between groups on the short-term memory storage task. In addition, no effects of sex were detected. Discussion Our results confirm that PA was positively to visuospatial working memory and that this positive relationship was associated with more rapid cognitive processing during the manipulation stage, with little or no relationship between PA and the memory storage stage of visuospatial working memory.

  14. Intermediary object for participative design processes based on the ergonomic work analysis

    DEFF Research Database (Denmark)

    Souza da Conceição, Carolina; Duarte, F.; Broberg, Ole

    2012-01-01

    The objective of this paper is to present and discuss the use of an intermediary object, built from the ergonomic work analysis, in a participative design process. The object was a zoning pattern, developed as a visual representation ‘mapping’ of the interrelations among the functional units...... of the offshore accommodations module. The ergonomic work analysis is a method that favors the identification of everyday problems, so having direct link to participatory structures. And the developed zoning pattern tool seemed to be an appropriate way of transferring the use experience into the design process....

  15. Heart Rate Variability Changes in Business Process Outsourcing Employees Working in Shifts

    OpenAIRE

    Kunikullaya, Kirthana U; Kirthi, Suresh K; D Venkatesh; Goturu, Jaisri

    2010-01-01

    Background and Objectives Irregular and poor quality sleep is common in business process outsourcing (BPO) employees due to continuous shift working. The influence of this on the cardiac autonomic activity was investigated by the spectral analysis of heart rate variability (HRV). Methods 36 night shift BPO employees (working from 22:00 to 06:00h) and 36 age and sex matched day shift BPO employees (working from 08:00 to 16:00h) were recruited for the study. Five minute electrocardiogram (ECG) ...

  16. Spatial working memory and spatial attention rely on common neural processes in the intraparietal sulcus.

    Science.gov (United States)

    Silk, Timothy J; Bellgrove, Mark A; Wrafter, Pia; Mattingley, Jason B; Cunnington, Ross

    2010-11-01

    Our ability to remember locations in space (spatial working memory) and our ability to direct attention to those locations (spatial attention) are two fundamental and closely related cognitive processes. A growing body of behavioural evidence suggests that spatial working memory and spatial attention share common resources, while neuroimaging studies show some overlap in the neural regions that mediate these two cognitive functions. The current study used fMRI to directly examine the extent to which spatial working memory and spatial attention rely on common underlying neural mechanisms. Twenty healthy participants underwent functional MRI while performing a dual task of spatial working memory incorporating a visual search task during the working memory retention interval. Working memory and visual search task loads were parametrically modulated. A wide network of prefrontal, premotor, and parietal regions showed increasing activity with increased spatial working memory load. Of these areas, part of the right supramarginal gyrus, lying along the intraparietal sulcus, showed a significant interaction such that the neural activity associated with spatial working memory load was significantly attenuated as visual search load in the dual task was increased. This interaction suggests that this part of the supramarginal gyrus, along the intraparietal sulcus, is critical for mediating both spatial working memory and shifts in spatial attention. Copyright 2010 Elsevier Inc. All rights reserved.

  17. Work organization on smallholder dairy farms: a process unique to each farm.

    Science.gov (United States)

    Hostiou, Nathalie; Cialdella, Nathalie; Vazquez, Vincent; Müller, Artur Gustavo; Le Gal, Pierre-Yves

    2015-10-01

    The way smallholder farms organize and carry out work impacts their ability to secure their livelihoods and meet growing demand for agricultural products. This study investigates the way dairy family farms in Brazil manage their workforce to achieve their objectives of production and income. Fifteen smallholder farms were surveyed using the QuaeWork method to understand the work organization on each farm. A high diversity of workloads was found, but these do not appear to be strictly related to the farms' production systems. The high variability of workloads is linked to the available workforce, technical choices, and the delegation of tasks to an external workforce. Farmers can decrease their workload by adopting milking mechanization, silage, hiring labor, and increasing the duration of the work day. Work organization depends on a farmer's personal choices, rendering the whole issue of workforce management a process unique to each farm.

  18. Risk assessment by the occupational safety and health at work in the process of geological exploration

    Directory of Open Access Journals (Sweden)

    Staletović Novica M.

    2015-01-01

    Full Text Available This paper presents a model of risk assessment in terms of safety and health at work in the process of geological work/ drilling. Optimization model estimates OH & S risk for work place qualified driller, is in line with the provisions of the Mining and Geological exploration, the Law on Safety and Health at Work, the application of the requirements of ISO 31000 and criteria Kinny methods. Model estimates OH & S risks is the basis for the development and implementation of the management system of protection of health and safety at work according to BS OHSAS 18001: 2008 model is applied, checked and verified the approved exploration areas during execution and supervision applied geological exploration (of metals on the territory of the Republic of Serbia.

  19. Operationalizing a shared decision making model for work rehabilitation programs: a consensus process.

    Science.gov (United States)

    Coutu, Marie-France; Légaré, France; Durand, Marie-José; Corbière, Marc; Stacey, Dawn; Bainbridge, Lesley; Labrecque, Marie-Elise

    2015-03-01

    The objective of this study was to design and operationalize shared decision making (SDM) rehabilitation model for worker rehabilitation programs. SDM has previously been shown to improve decision outcomes in patient-health care professional relationships. To date, SDM has not yet been adapted to work rehabilitation, although it could be a valuable approach to better understand and agree on return-to-work decisions. We designed a preliminary model for return-to-work decisions for workers suffering from pain due to musculoskeletal injuries. We submitted the preliminary model and a questionnaire to expert health care professionals. Using the Technique for Research of Information by Animation of a Group of Experts method, a group consensus process was used to discuss and refine the experts' responses to operationalize a model adapted for rehabilitation. Eleven occupational therapists (three were clinical coordinators) and four psychologists participated in three group consensus sessions. The final version of the model included one general longitudinal objective (the maintenance of a working alliance and assuring mutual comprehension among all stakeholders), and 11 specific objectives: establishing a working alliance, seven in the deliberation phase of the SDM process, and three in the implementation of the decision. Participants also reached consensus on between 1 and 8 indicators per objective. We developed and operationalized an SDM rehabilitation model intended for a return-to-work implementation plan. The next step will be to document its feasibility among the main stakeholders (employer, union, insurer and worker) taking part in decisions about return to work.

  20. Position, possession or process? Understanding objective and subjective employability during university-to-work transitions

    OpenAIRE

    Okay-Somerville, Belgin; Scholarios, Dora

    2017-01-01

    This article aims to understand predictors of objective (i.e. job offers, employment status and employment quality) and subjective (i.e. perceived) graduate employability during university-to-work transitions. Using survey data from two cohorts of graduates in the UK (N = 293), it contrasts three competing theoretical approaches to employability: position (based on social background), possession (of human capital) and process (of career self-management (CSM)). Findings support the process vie...

  1. Evaluation of Transportation Vibration Associated with Relocation of Work in Process As Part of KCRIMS

    Energy Technology Data Exchange (ETDEWEB)

    Hartwig, Troy

    2013-04-01

    During relocation of the Kansas City Plant (KCP) from the site at Bannister Road to the site at Botts Road, work in process (WIP) within a production department must be transported. This report recommends packaging to mitigate vibration levels experienced by products during between-facility transportation. Measurements and analysis demonstrate that this mitigation results in vibration levels less than those experienced by the product during routine production processes within potentially damaging frequency ranges.

  2. Working Memory, Processing Speed, and Executive Memory Contributions to Computer-Assisted Second Language Learning

    OpenAIRE

    Nelson, Keith E.; Barlieb, Aran; Khan, Kiren; Vance Trup, Elisabeth M; Heimann, Mikael; Tjus, Tomas; Rudner, Mary; Rönnberg, Jerker

    2012-01-01

    How individual differences in information processing affect second language (L2) learning has been unclear in prior research. Adults lacking prior skill in Swedish were pretested for working memory, processing speed, and executive memory capacity. Participants then received 6 computer-based instructional sessions with pictorial animations of Swedish sentences, with a built-in experimental contrast between some lessons at high and some at low rates of presentation. The faster rate carried grea...

  3. The Missing Piece in Threat Intelligence

    Directory of Open Access Journals (Sweden)

    Frank Denis

    2016-03-01

    Full Text Available Common systems for sharing intelligence on security threats have not been designed to efficiently process feedback from infrastructure providers. In order to fill this gap, we introduce DIP, a new description language to expose changes being made on a network that are relevant to security research and prevention.

  4. The Missing Piece in Threat Intelligence

    OpenAIRE

    Frank Denis

    2016-01-01

    Common systems for sharing intelligence on security threats have not been designed to efficiently process feedback from infrastructure providers. In order to fill this gap, we introduce DIP, a new description language to expose changes being made on a network that are relevant to security research and prevention.

  5. Sentence processing and verbal working memory in a white-matter-disconnection patient.

    Science.gov (United States)

    Meyer, Lars; Cunitz, Katrin; Obleser, Jonas; Friederici, Angela D

    2014-08-01

    The Arcuate Fasciculus/Superior Longitudinal Fasciculus (AF/SLF) is the white-matter bundle that connects posterior superior temporal and inferior frontal cortex. Its causal functional role in sentence processing and verbal working memory is currently under debate. While impairments of sentence processing and verbal working memory often co-occur in patients suffering from AF/SLF damage, it is unclear whether these impairments result from shared white-matter damage to the verbal-working-memory network. The present study sought to specify the behavioral consequences of focal AF/SLF damage for sentence processing and verbal working memory, which were assessed in a single patient suffering from a cleft-like lesion spanning the deep left superior temporal gyrus, sparing most surrounding gray matter. While tractography suggests that the ventral fronto-temporal white-matter bundle is intact in this patient, the AF/SLF was not visible to tractography. In line with the hypothesis that the AF/SLF is causally involved in sentence processing, the patient׳s performance was selectively impaired on sentences that jointly involve both complex word orders and long word-storage intervals. However, the patient was unimpaired on sentences that only involved long word-storage intervals without involving complex word orders. On the contrary, the patient performed generally worse than a control group across standard verbal-working-memory tests. We conclude that the AF/SLF not only plays a causal role in sentence processing, linking regions of the left dorsal inferior frontal gyrus to the temporo-parietal region, but moreover plays a crucial role in verbal working memory, linking regions of the left ventral inferior frontal gyrus to the left temporo-parietal region. Together, the specific sentence-processing impairment and the more general verbal-working-memory impairment may imply that the AF/SLF subserves both sentence processing and verbal working memory, possibly pointing to the AF

  6. PROCESS OF WRITING IN AN ESSAY WRITING TEST: DOES IT WORK?

    Directory of Open Access Journals (Sweden)

    AB Prabowo KA, S.Pd., M.Hum. AB Prabowo KA, S.Pd., M.Hum.

    2017-04-01

    Full Text Available In the writing teaching and learning, good students should involve process of writing in order to produce an effective writing. This statement is supported by Oshima (2006:3 that writing is as a process rather than a product. The process of writing includes prewriting, drafting, revising, editing and publishing. The process of writing is used to organize what the students think, plan and help them in writing a composition, especially an essay. It means that the ideas organized can be done through steps or procedures in the process of writing. However, the problem appears when students take an essay writing test. From the writer’s point of view, this process seems inapplicable in the test. Therefore, it is necessary for the writer to get further information on the factors related to the process of writing in the essay writing test. This qualitative study tries to answer the following questions: (1 Do lecturers acknowledge process of writing to the students? (2 Do students practice and apply process of writing in the essay writing tasks? (3 Does process of writing work in an essay writing test? In order to collect the data, test and questionnaire are applied. It is expected that students are able to apply the process of writing in the limited time such as an essay writing test. Therefore, the final draft of writing an essay is expected to be an effective writing.

  7. Green tea extract enhances parieto-frontal connectivity during working memory processing.

    Science.gov (United States)

    Schmidt, André; Hammann, Felix; Wölnerhanssen, Bettina; Meyer-Gerspach, Anne Christin; Drewe, Jürgen; Beglinger, Christoph; Borgwardt, Stefan

    2014-10-01

    It has been proposed that green tea extract may have a beneficial impact on cognitive functioning, suggesting promising clinical implications. However, the neural mechanisms underlying this putative cognitive enhancing effect of green tea extract still remain unknown. This study investigates whether the intake of green tea extract modulates effective brain connectivity during working memory processing and whether connectivity parameters are related to task performance. Using a double-blind, counterbalanced, within-subject design, 12 healthy volunteers received a milk whey-based soft drink containing 27.5 g of green tea extract or a milk whey-based soft drink without green tea as control substance while undergoing functional magnetic resonance imaging. Working memory effect on effective connectivity between frontal and parietal brain regions was evaluated using dynamic causal modeling. Green tea extract increased the working memory induced modulation of connectivity from the right superior parietal lobule to the middle frontal gyrus. Notably, the magnitude of green tea induced increase in parieto-frontal connectivity positively correlated with improvement in task performance. Our findings provide first evidence for the putative beneficial effect of green tea on cognitive functioning, in particular, on working memory processing at the neural system level by suggesting changes in short-term plasticity of parieto-frontal brain connections. Modeling effective connectivity among frontal and parietal brain regions during working memory processing might help to assess the efficacy of green tea for the treatment of cognitive impairments in psychiatric disorders such as dementia.

  8. Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach

    NARCIS (Netherlands)

    Miao, Yongwu; Sloep, Peter; Koper, Rob

    2009-01-01

    Miao, Y., Sloep, P. B., & Koper, R. (2010). Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach. In D. Griffiths & R. Koper (Eds.), Rethinking Learning and Employment at a Time of Economic Uncertainty. Proceedings of the 6th TENCompetence Open

  9. The Impact of Project Work and the Writing Process Method on Writing Production

    Science.gov (United States)

    Díaz Ramírez, Marcela

    2014-01-01

    This article presents the outcomes of an investigation whose main goal was to implement the methodology of project work and a process approach in order to improve writing production in an English class of Colombian university students since their diagnostic tests showed that their written production had the lowest score. Based on data collected,…

  10. Phasic deactivation of the medial temporal lobe enables working memory processing under stress.

    Science.gov (United States)

    Cousijn, Helena; Rijpkema, Mark; Qin, Shaozheng; van Wingen, Guido A; Fernández, Guillén

    2012-01-16

    Demanding cognitive tasks are sometimes carried out under stressful conditions. Several studies indicate that whereas severe stress impairs performance, moderate stress can enhance cognitive performance. In this study, we investigated how moderate stress influences the neural systems supporting working memory. We embedded an N-back working memory task in a moderately stressful context, as indicated by our physiological stress measures, and probed phasic and tonic human brain activity using two fMRI-techniques: conventional blood oxygen level dependent fMRI and arterial spin labeling (ASL). The results showed that the stress induction, as compared to the neutral control condition, led to slightly faster reaction times without changes in accuracy. In general, working memory processing was associated with increased activity in a frontoparietal network and reduced activity in the medial temporal lobe (MTL). The stress induction led to enhanced reduction of phasic MTL responses, specifically the hippocampus and amygdala. In addition, ASL showed that stress increased tonic amygdala activity, while tonic hippocampal activity was unaffected. These findings suggest that the influence of stress on MTL deactivation during working memory processing is task-related rather than a general consequence of the stressful state. The temporal suspension of hippocampal processing in favor of more task relevant processes may allow subjects to maintain normal performance levels under moderate stress. Copyright © 2011 Elsevier Inc. All rights reserved.

  11. Group Work Oral Participation: Examining Korean Students' Adjustment Process in a US University

    Science.gov (United States)

    Kim, Jung Yin

    2016-01-01

    This study examines, from a sociocultural perspective, the factors that explain why a group of seven Korean students attending an undergraduate business program in a US university are initially labelled as silent participants when first engaging in group work, and how these factors impacted the students' overall adjustment process. Data came from…

  12. Effects of Stress and Working Memory Capacity on Foreign Language Readers' Inferential Processing during Comprehension

    Science.gov (United States)

    Rai, Manpreet K.; Loschky, Lester C.; Harris, Richard Jackson; Peck, Nicole R.; Cook, Lindsay G.

    2011-01-01

    Although stress is frequently claimed to impede foreign language (FL) reading comprehension, it is usually not explained how. We investigated the effects of stress, working memory (WM) capacity, and inferential complexity on Spanish FL readers' inferential processing during comprehension. Inferences, although necessary for reading comprehension,…

  13. Missing work after retirement: The role of life histories in the retirement adjustment process

    NARCIS (Netherlands)

    Damman, M.; Henkens, K.; Kalmijn, M.

    2015-01-01

    Purpose of the Study: Although the process of adjustment to retirement is often assumed to be related to experiences earlier in life, quantitative empirical insights regarding these relationships are limited. This study aims to improve our understanding of adjustment to the loss of the work role, by

  14. Missing work after retirement: the role of life histories in the retirement adjustment process

    NARCIS (Netherlands)

    Damman, M.; Henkens, K.; Kalmijn, M.

    2015-01-01

    Purpose of the Study: Although the process of adjustment to retirement is often assumed to be related to experiences earlier in life, quantitative empirical insights regarding these relationships are limited. This study aims to improve our understanding of adjustment to the loss of the work role, by

  15. Emotional Arousal, Client Perceptual Processing, and the Working Alliance in Experiential Psychotherapy for Depression

    Science.gov (United States)

    Missirlian, Tanya M.; Toukmanian, Shake G.; Warwar, Serine H.; Greenberg, Leslie S.

    2005-01-01

    Early-, middle-, and late-phase client emotional arousal, perceptual processing strategies, and working alliance were examined in relation to treatment outcome on 4 measures in 32 clients who previously underwent experiential therapy for depression. Hierarchical regression analyses relating these variables to outcome indicated that results varied…

  16. A Split-Attention Effect in Multimedia Learning: Evidence for Dual Processing Systems in Working Memory.

    Science.gov (United States)

    Mayer, Richard E.; Moreno, Roxana

    1998-01-01

    Multimedia learners (n=146 college students) were able to integrate words and computer-presented pictures more easily when the words were presented aurally rather than visually. This split-attention effect is consistent with a dual-processing model of working memory. (SLD)

  17. Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach

    NARCIS (Netherlands)

    Miao, Yongwu; Sloep, Peter; Koper, Rob

    2009-01-01

    Miao, Y., Sloep, P. B., & Koper, R. (2009). Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach. Presented at the 'Open workshop of TENCompetence - Rethinking Learning and Employment at a Time of Economic Uncertainty-event'. November, 19, 2009,

  18. Everything is Not a Process: Products, Games and Emerging Metaphors for Work

    Science.gov (United States)

    2012-02-01

    training , coaching, and even advertising as part of our soccer process enterprise. But perhaps there are other, better ways to de- scribe this series...intriguing metaphors for work to emerge in re- cent years is to describe it as a game. Jane McGonigal is a lead- ing expert on “ gamification ,” and her

  19. Emotion perception and executive control interact in the salience network during emotionally charged working memory processing

    NARCIS (Netherlands)

    Luo, Y.; Qin, S.; Fernandez, G.S.E.; Zhang, Y.; Klumpers, F.; Li, H.

    2014-01-01

    Processing of emotional stimuli can either hinder or facilitate ongoing working memory (WM); however, the neural basis of these effects remains largely unknown. Here we examined the neural mechanisms of these paradoxical effects by implementing a novel emotional WM task in an fMRI study. Twenty-five

  20. State Anxiety and Working Memory in Children: A Test of Processing Efficiency Theory

    Science.gov (United States)

    Hadwin, Julie A.; Brogan, Joanna; Stevenson, Jim

    2005-01-01

    This study investigated the effect of individual differences in state anxiety on tasks tapping the central executive, phonological, and visuo-spatial components of working memory (WM). It was designed to test Eysenck and Calvo's processing efficiency theory (PET) which suggests that the phonological and executive components of WM may be important…

  1. Reviewing the Role of Cognitive Load, Expertise Level, Motivation, and Unconscious Processing in Working Memory Performance

    Science.gov (United States)

    Kuldas, Seffetullah; Hashim, Shahabuddin; Ismail, Hairul Nizam; Abu Bakar, Zainudin

    2015-01-01

    Human cognitive capacity is unavailable for conscious processing of every amount of instructional messages. Aligning an instructional design with learner expertise level would allow better use of available working memory capacity in a cognitive learning task. Motivating students to learn consciously is also an essential determinant of the capacity…

  2. Cortical oscillations and entrainment in speech processing during working memory load

    DEFF Research Database (Denmark)

    Hjortkjaer, Jens; Märcher-Rørsted, Jonatan; Fuglsang, Søren A

    2018-01-01

    Neuronal oscillations are thought to play an important role in working memory (WM) and speech processing. Listening to speech in real-life situations is often cognitively demanding but it is unknown whether WM load influences how auditory cortical activity synchronizes to speech features. Here we...

  3. Working Memory Tasks in Relation to Phonological Processes of Arab Dyslexics in the State of Kuwait

    Science.gov (United States)

    Al-dyiar, Mosaad Abo; Salem, Ashraf Atta M. S.

    2013-01-01

    The current study investigated the relationship between the working memory tasks and the phonological processes of Arab dyslexics in the primary stage in the State of Kuwait. The researchers used the descriptive research design. The sample of the study consists of 500 pupils (250 males and 250 females), their ages range from (9.05 ± 0.49) years…

  4. Work processes for the development of integrated e-learning courses

    OpenAIRE

    Schlusmans, Kathleen; Koper, Rob; Giesbertz, Wil

    2003-01-01

    Published in: Schlusmans, K.H.L.A., Koper, E.J.R., & Giesbertz, W.J., (2004). Work processes for the development of integrated e-learning courses. In W. Jochems, J. van Merrienboer, & E.J.R. Koper, Integrated eLearning (pp. 126-138). London: RoutledgeFalmer.

  5. Manager Experiences with the Return to Work Process in a Large, Publically Funded, Hospital Setting

    DEFF Research Database (Denmark)

    Stochkendahl, Mette Jensen; Myburgh, Corrie; Young, Amanda Ellen

    2015-01-01

    Purpose Previous research on the role of managers in the return to work (RTW) process has primarily been conducted in contexts where the workplace has declared organizational responsibility for the process. While this is a common scenario, in some countries, including Denmark, there is no explicit......, organizational, and policy factors. Instances were observed where supervisors faced the dilemma of balancing ethical and managerial principles with requirements of keeping staffing budgets. Conclusion Although it is not their legislative responsibility, Danish managers play a key role in the RTW process. As has...

  6. The Influence of tolerance on the Learning Processes in Project Group Work

    DEFF Research Database (Denmark)

    Wiberg, Merete

    This paper presents a moral perspective on group work in higher education by addressing tolerance as a moral value of practice which is intertwined with learning of disciplinary knowledge. The relevance of tolerance among students is discussed in relation to Dewey's ideas of learning through...... of the concept. Project group work is an example of a social setting in an educational context where collaboration between students on the one hand is seen as a way to stimulate processes of learning  and on the other hand to strengthen social and moral competences. To be discussed in the paper is how group work...... offers various challenges on a social, moral and intellectual level and how tolerance might play a role in the processes of learning....

  7. Deformation mechanism under essential work of fracture process in polycyclo-olefin materials

    Directory of Open Access Journals (Sweden)

    2008-06-01

    Full Text Available The fracture toughness of a glassy polycyclo-olefin (PCO was investigated by the essential work of fracture (EWF method using a double-edge notched specimens. It was shown that the PCO follows the EWF concept in the temperature range between room temperature and glass transition temperature Tg where the ligament yielding appear at a maximum point on the stress-displacement curves and subsequently the necking and tearing processes take place in the post yielding region. The essential work of fracture required for the ligament yielding drops as the temperature approaches Tg. The non-essential work of fracture attributed to tearing process after yielding is consumed to expand the plastic region and causes molecular chains to orient to the stretching direction.

  8. Exploring Selective Exposure and Confirmation Bias as Processes Underlying Employee Work Happiness: An Intervention Study

    Science.gov (United States)

    Williams, Paige; Kern, Margaret L.; Waters, Lea

    2016-01-01

    Employee psychological capital (PsyCap), perceptions of organizational virtue (OV), and work happiness have been shown to be associated within and over time. This study examines selective exposure and confirmation bias as potential processes underlying PsyCap, OV, and work happiness associations. As part of a quasi-experimental study design, school staff (N = 69) completed surveys at three time points. After the first assessment, some staff (n = 51) completed a positive psychology training intervention. Results of descriptive statistics, correlation, and regression analyses on the intervention group provide some support for selective exposure and confirmation bias as explanatory mechanisms. In focusing on the processes through which employee attitudes may influence work happiness this study advances theoretical understanding, specifically of selective exposure and confirmation bias in a field study context. PMID:27378978

  9. Multidisciplinary team of intensive therapy: humanization and fragmentation of the work process.

    Science.gov (United States)

    Evangelista, Viviane Canhizares; Domingos, Thiago da Silva; Siqueira, Fernanda Paula Cerântola; Braga, Eliana Mara

    2016-01-01

    to understand the meaning of humanized care in intensive care units considering the experience of the multidisciplinary team. descriptive and exploratory qualitative research. For this purpose, we conducted semi-structured interviews with 24 professionals of the heath-care team, and, after transcription, we organized the qualitative data according to content analysis. from two main categories, we were able to understand that humanized care is characterized in the actions of health-care: effective communication, team work, empathy, singularity, and integrality; and mischaracterized in the management processes, specifically in the fragmentation of the work process and health-care, in the precarious work conditions, and in differing conceptual aspects of the political proposal of humanization. care activities in intensive therapy are guided by the humanization of care and corroborate the hospital management as a challenge to be overcome to boost advances in the operationalization of this Brazilian policy.

  10. Bearing the brunt: co-workers' experiences of work reintegration processes.

    Science.gov (United States)

    Dunstan, Debra A; MacEachen, Ellen

    2013-03-01

    Work disability research has found co-worker support to be a significant but under-recognised aspect of work reintegration (WR) processes. Although co-workers work alongside returning workers, their practical contribution to WR success or failure is often invisible to others. This study aimed to gain further insight into the role and contribution of co-workers in WR interventions. An exploratory qualitative pilot study was conducted in Toronto, Canada in 2011. Three focus groups were conducted with 13 co-workers, recruited for their direct experience of 'working alongside' a returning worker. An iterative data gathering and analysis process occurred. Themes were generated from categories in open-ended interview questions and new issues arising from the data. The findings detail co-workers' practical experiences of WR processes and their reflections on social and work conditions that impacted their participation. Co-workers' capacity to support returning workers was related to the quality of the WR arrangements, the relationship with the returning worker, work culture, and the duration of the required support. Workplace privacy and confidentiality requirements were identified as a key challenge for co-worker participation. The effects on co-workers of WR processes ranged from the opportunity to learn new skills to disillusionment and withdrawal from the workplace. In worst case scenarios, 'ripple effects' including emotional distress, physical injury and termination of co-workers' employment had occurred. Co-workers are not a neutral party in WR procedures. Formalizing the co-worker role to include communication, consideration and recognition might improve co-workers' WR experiences.

  11. Pedagogical processes in healthcare: an exploratory study of pedagogic work with patients and next of kin.

    Science.gov (United States)

    Hult, Håkan; Lindblad Fridh, Marianne; Lindh Falk, Annika; Thörne, Karin

    2009-12-01

    Care and education have much in common, and work in the healthcare sector is closely associated with learning and teaching. It is felt that many in the healthcare and medical services are not aware of their pedagogic skills and how they can be developed. FRAME OF REFERENCE: Belonging to a community of practice means that you share perspectives, methods and language. The aim is to describe the pedagogical discourse by identifying pedagogical processes and studying the staff's awareness of such processes or situations in which a pedagogical approach would be useful in their work with patients and next of kin. A qualitative study based on individual and group interviews. The analysis is directed by grounded theory. The pedagogical processes varied in length and quality. Most were unplanned and were usually embedded in treatment. The pedagogical process is linear (planning, goal setting, teaching and evaluating) in an educational setting but we found that the beginning and end can be unclear and the goals can be vague or non-existent. The pedagogical process is best described using the concepts Read, Guide and Provide learning support. The pedagogical discourse in healthcare is almost silent. Data indicate that at the collective level there is very little support for professional development of pedagogical ability. Tacit knowledge may therefore remain silent even though it may be possible to formulate and describe it. There is a strong need to focus on the pedagogical parts of the work and to encourage and support the development of professional pedagogical knowledge.

  12. Integrative strategy formation process and the management of complex work - a microorganizational analisys

    Directory of Open Access Journals (Sweden)

    Rosalia Aldraci Barbosa Lavarda

    2010-01-01

    Full Text Available The goal of this study is to analyse how the strategy formation process takes place; studying the relevance of the integrative perspective and the use of the variables rationality, involvement and vision; Verifying the relationship between an integrative strategy formation process and the management of work and the consequences of this relationship in terms of performance, identifying the causes for a better fit; Also, verify the propositions that have been formulated and looking for new variables that could affect the relationship between strategic process and work management. It has been adopted a qualitative methodology through a study case. After the case analysis it has been identified two different variables (flexibility and the role of the middle manager that can have an influence in the subject of study; also, it has been found that if there is an important fit between the variables that define an integrative strategy formation process and the design variables used in the management of work, the process will be more efficient and, consequently, the organisation will obtain better results.

  13. Quality status display for a vibration welding process

    Energy Technology Data Exchange (ETDEWEB)

    Spicer, John Patrick; Abell, Jeffrey A.; Wincek, Michael Anthony; Chakraborty, Debejyo; Bracey, Jennifer; Wang, Hui; Tavora, Peter W.; Davis, Jeffrey S.; Hutchinson, Daniel C.; Reardon, Ronald L.; Utz, Shawn

    2017-11-28

    A method includes receiving, during a vibration welding process, a set of sensory signals from a collection of sensors positioned with respect to a work piece during formation of a weld on or within the work piece. The method also includes receiving control signals from a welding controller during the process, with the control signals causing the welding horn to vibrate at a calibrated frequency, and processing the received sensory and control signals using a host machine. Additionally, the method includes displaying a predicted weld quality status on a surface of the work piece using a status projector. The method may include identifying and display a quality status of a suspect weld. The laser projector may project a laser beam directly onto or immediately adjacent to the suspect welds, e.g., as a red, green, blue laser or a gas laser having a switched color filter.

  14. Spatial working memory in children with high-functioning autism: intact configural processing but impaired capacity.

    Science.gov (United States)

    Jiang, Yuhong V; Capistrano, Christian G; Palm, Bryce E

    2014-02-01

    Visual attention and visual working memory exert severe capacity limitations on cognitive processing. Impairments in both functions may exacerbate the social and communication deficits seen in children with an autism spectrum disorder (ASD). This study characterizes spatial working memory and visual attention in school-age children with high-functioning autism. Children with ASD, and age, gender, and IQ-matched typically developing (TD) children performed 2 tasks: a spatial working memory task and an attentive tracking task. Compared with TD children, children with ASD showed a more pronounced deficit in the spatial working memory task than the attentive tracking task, even though the latter placed significant demands on sustained attention, location updating, and distractor inhibition. Because both groups of children were sensitive to configuration mismatches between the sample and test arrays, the spatial working memory deficit was not because of atypical organization of spatial working memory. These findings show that attention and working memory are dissociable, and that children with ASD show a specific deficit in buffering visual information across temporal discontinuity. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  15. Processing efficiency theory in children: working memory as a mediator between trait anxiety and academic performance.

    Science.gov (United States)

    Owens, Matthew; Stevenson, Jim; Norgate, Roger; Hadwin, Julie A

    2008-10-01

    Working memory skills are positively associated with academic performance. In contrast, high levels of trait anxiety are linked with educational underachievement. Based on Eysenck and Calvo's (1992) processing efficiency theory (PET), the present study investigated whether associations between anxiety and educational achievement were mediated via poor working memory performance. Fifty children aged 11-12 years completed verbal (backwards digit span; tapping the phonological store/central executive) and spatial (Corsi blocks; tapping the visuospatial sketchpad/central executive) working memory tasks. Trait anxiety was measured using the State-Trait Anxiety Inventory for Children. Academic performance was assessed using school administered tests of reasoning (Cognitive Abilities Test) and attainment (Standard Assessment Tests). The results showed that the association between trait anxiety and academic performance was significantly mediated by verbal working memory for three of the six academic performance measures (math, quantitative and non-verbal reasoning). Spatial working memory did not significantly mediate the relationship between trait anxiety and academic performance. On average verbal working memory accounted for 51% of the association between trait anxiety and academic performance, while spatial working memory only accounted for 9%. The findings indicate that PET is a useful framework to assess the impact of children's anxiety on educational achievement.

  16. Working memory and processing speed training in schizophrenia: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Cassetta, Briana D; Goghari, Vina M

    2016-01-26

    In most domains of cognition, individuals with schizophrenia are generally found to be one standard deviation below the mean of the controls. As a result, examining the impact of cognitive remediation in individuals with schizophrenia has been a burgeoning area of research. However, the state of the literature remains unclear as to which domains of cognition should be targeted to produce the most widespread and durable benefits for individuals with schizophrenia. One suggestion is that targeting lower-level cognitive processes that are important for higher-level and more complex aspects of cognition may produce the most widespread benefits in cognition and everyday functioning. Relatively few studies have examined the effects of working memory or processing speed training in schizophrenia, as most studies examine broad-based remediation programs. Thus, a need exists for targeted working memory and processing speed training studies to better understand the mechanisms of cognitive enhancement in patients. This study aims to 1) investigate near-transfer gains (that is, the transfer of learning to related contexts) associated with working memory and processing speed training in schizophrenia patients; 2) investigate far-transfer gains (that is, the transfer of learning to new contexts) associated with working memory and processing speed training (that is, gains in other neurocognitive domains and social cognition); and 3) investigate real-world gains associated with training (that is, gains in daily functioning). A double-blind randomized controlled trial with a three parallel group design will be conducted. A random sample of 81 patients with schizophrenia or schizoaffective disorder will be recruited through outpatient clinics at Foothills Hospital and community support programs in Calgary, Alberta. Participants will be randomly assigned using a computer-generated program in a 1:1:1 ratio to a working memory-training group, a processing speed-training group, or a no

  17. Distinct contributions of attention and working memory to visual statistical learning and ensemble processing.

    Science.gov (United States)

    Hall, Michelle G; Mattingley, Jason B; Dux, Paul E

    2015-08-01

    The brain exploits redundancies in the environment to efficiently represent the complexity of the visual world. One example of this is ensemble processing, which provides a statistical summary of elements within a set (e.g., mean size). Another is statistical learning, which involves the encoding of stable spatial or temporal relationships between objects. It has been suggested that ensemble processing over arrays of oriented lines disrupts statistical learning of structure within the arrays (Zhao, Ngo, McKendrick, & Turk-Browne, 2011). Here we asked whether ensemble processing and statistical learning are mutually incompatible, or whether this disruption might occur because ensemble processing encourages participants to process the stimulus arrays in a way that impedes statistical learning. In Experiment 1, we replicated Zhao and colleagues' finding that ensemble processing disrupts statistical learning. In Experiments 2 and 3, we found that statistical learning was unimpaired by ensemble processing when task demands necessitated (a) focal attention to individual items within the stimulus arrays and (b) the retention of individual items in working memory. Together, these results are consistent with an account suggesting that ensemble processing and statistical learning can operate over the same stimuli given appropriate stimulus processing demands during exposure to regularities. (c) 2015 APA, all rights reserved).

  18. Connectingthe puzzle pieces between cytoskeleton andsecretory pathway

    Science.gov (United States)

    Gurel, Pinar S.; Hatch, Anna L.; Higgs, Henry N.

    2014-01-01

    A tendency in cell biology is to divide and conquer. For example, decades of painstaking work have led to an understanding of endoplasmic reticulum (ER) and Golgi structure, dynamics, and transport. In parallel, cytoskeletal researchers have revealed a fantastic diversity of structure and cellular function in both actin and microtubules. Increasingly, these areas overlap, necessitating an understanding of both organelle and cytoskeletal biology. This review addressesconnections between the actin/microtubule cytoskeletons and organelles in animal cells, focusing on threetopics: ER structure/function, ER-to-Golgi transport; and Golgi structure/function. Making these connections has been challenging, due to 1) the small sizes and dynamic characteristics of some components, 2) the fact that organelle-specific cytoskeleton can easily be obscured by more abundant cytoskeletal structures, and 3) the difficulties in imaging membranes and cytoskeleton simultaneously, especially at the ultra-structural level. One major concept is that the cytoskeleton is frequently used to generate force for membrane movement, with two potential consequences: translocation of the organelle, or deformation of the organelle membrane. While initially discussing issues common to metazoan cells in general, we subsequently highlight specific features of neurons, since these highly polarized cells present unique challenges for organellar distribution and dynamics. PMID:25050967

  19. Nd:YAG capsulotomy rates after use of the AcrySof acrylic three piece and one piece intraocular lenses.

    Science.gov (United States)

    Mian, S I; Fahim, K; Marcovitch, A; Gada, H; Musch, D C; Sugar, A

    2005-11-01

    Acrylic lens size and shape may influence the rate of posterior capsule opacification (PCO) and need for Nd:YAG capsulotomy. The aim of this study is to compare the Nd:YAG capsulotomy rate of the three piece acrylic/PMMA AcrySof MA series lens with the one piece acrylic AcrySof SA series lens. 434 eyes of 329 patients who had cataract extraction and implantation of one of four types of intraocular lenses (IOLs) were evaluated for rate of Nd:YAG capsulotomy. 176 eyes received the acrylic AcrySof MA30AC IOL, 71 eyes the acrylic AcrySof MA60AC IOL, 45 eyes the acrylic AcrySof SA30AL IOL, and 142 eyes the acrylic AcrySof SA60AT IOL. The rates of Nd:YAG capsulotomy with the three piece IOL (MA30AC/MA60AC) and the one piece IOL (SA30AL/SA60AT) were 1.2% and 2.1% at 6 months, 2.8% and 5.9% at 12 months, and 3.6% and 7.5% at 24 months, respectively. The incidence of Nd:YAG capsulotomy was higher in patients who received the one piece IOL (p=0.01, log rank test). There was no difference in Nd:YAG capsulotomy rates when comparing lens optic size, age, sex, history of pars plana vitrectomy, and diabetes mellitus. This study shows a greater incidence of Nd:YAG capsulotomy in patients who receive one piece acrylic AcrySof lenses when compared to those who receive three piece acrylic AcrySof lenses.

  20. Basic numerical processing, calculation, and working memory in children with dyscalculia and/or ADHD symptoms.

    Science.gov (United States)

    Kuhn, Jörg-Tobias; Ise, Elena; Raddatz, Julia; Schwenk, Christin; Dobel, Christian

    2016-09-01

    Deficits in basic numerical skills, calculation, and working memory have been found in children with developmental dyscalculia (DD) as well as children with attention-deficit/hyperactivity disorder (ADHD). This paper investigates cognitive profiles of children with DD and/or ADHD symptoms (AS) in a double dissociation design to obtain a better understanding of the comorbidity of DD and ADHD. Children with DD-only (N = 33), AS-only (N = 16), comorbid DD+AS (N = 20), and typically developing controls (TD, N = 40) were assessed on measures of basic numerical processing, calculation, working memory, processing speed, and neurocognitive measures of attention. Children with DD (DD, DD+AS) showed deficits in all basic numerical skills, calculation, working memory, and sustained attention. Children with AS (AS, DD+AS) displayed more selective difficulties in dot enumeration, subtraction, verbal working memory, and processing speed. Also, they generally performed more poorly in neurocognitive measures of attention, especially alertness. Children with DD+AS mostly showed an additive combination of the deficits associated with DD-only and A_Sonly, except for subtraction tasks, in which they were less impaired than expected. DD and AS appear to be related to largely distinct patterns of cognitive deficits, which are present in combination in children with DD+AS.

  1. Working Memory in Children With Neurocognitive Effects From Sickle Cell Disease: Contributions of the Central Executive and Processing Speed.

    Science.gov (United States)

    Smith, Kelsey E; Schatz, Jeffrey

    2016-01-01

    Children with sickle cell disease (SCD) are at risk for working memory deficits due to multiple disease processes. We assessed working memory abilities and related functions in 32 school-age children with SCD and 85 matched comparison children using Baddeley's working memory model as a framework. Children with SCD performed worse than controls for working memory, central executive function, and processing/rehearsal speed. Central executive function was found to mediate the relationship between SCD status and working memory, but processing speed did not. Cognitive remediation strategies that focus on central executive processes may be important for remediating working memory deficits in SCD.

  2. Working Place as an Organisational Form of the Process of Labour

    Directory of Open Access Journals (Sweden)

    Amosov Oleg Yu.

    2013-11-01

    Full Text Available In order to achieve efficient functioning of modern production based on application of complex equipment and technology, which is characterised with a big number of internal production links, it is necessary to have an accurate organisation of the working place. The article considers the working place notion not from the position of a portion of space, which is adjusted for performance of production functions by a worker, but as an organisational form of the process of labour, which integrates its following components: organisational, technical, economic, social security of labour and intellectualisation of labour.

  3. [Preliminary application of atomic force microscopy on identification of native habitat of Chinese medicine decoction pieces].

    Science.gov (United States)

    Jiao, Ligong; Liu, Jing; Chen, Hao; Liao, Fulong; Han, Dong

    2012-04-01

    Identification of the native habitat of Chinese medicine decoction pieces plays an important role in the use of Chinese Heber medicine. However, the traditional method always based on subjective description, lack of quantitative information. In this study, nanomechanical analysis of Ophiopogonis Radix, Polygonati Odorati Rhizoma and Curcumae Aromaticae Radix coming from different districts was carried out by using the force-distance curve of atomic force microscopy (AFM), including stiffness (represented by the slope of the force curve) and adhesion work (calculated via the adhesion area of the retrace line in force-distance curve). The results showed that the Ophiopogonis Radix from Sichuan province (slope 0.03 +/- 0.001) was significantly stiffer but less sticky [adhesion work 393.98 +/- 49.21 x 10(-10)) J] in comparison with that from Hubei province [slope 0.018 +/- 0.001, adhesion work (985.67 +/- 91.61) x 10(-10) J]; the Polygonati Odorati Rhizoma Hunan province was stiffer (slope 0.03 +/- 0.002) and stickier [adhesion work (413.67 +/- 92.58) x10(-10) J] than that from Dongbei province [slope 0.019 +/- 0.002, adhesion work (27.37 +/- 11.05) x 10(-10) J]; the Curcumae Aromaticae Radix from Sichuan province was also stiffer (slope 0.019 +/- 0.0017) but less stickier [adhesion work (1179.79 +/- 225.05) x 10(-10) J] than that from Hubei province [slope 0.013 +/- 0.0006, adhesion work (2831.27 +/- 93.71) x 10(-10)]. It is indicated that changes in mechanical properties of Chinese medicine decoction pieces correlate well with their origin. This method may provide quantitative information for the identification of the native habitat of Chinese medicine decoction pieces.

  4. Selected aspects of the piece production of iron alloy castings in terms of their environmental impact

    Directory of Open Access Journals (Sweden)

    Z. Maniowski

    2010-07-01

    Full Text Available Problems of environmental protection are nowadays one of the top priorities in a policy programme adopted by the European Community.Reducing the negative impact of the domestic foundry industry on environment should result from complex and long-lasting activities,targeted not only at modernisation of the dust collecting units, but also at searches and implementation of alternative, innovative and more pro-ecology oriented means and techniques of casting manufacture. Reducing to minimum the level of emissions escaping to the environment should be considered at all stages of the casting manufacturing process. In this study, the discussion was restricted to the process of the manufacture of moulds and cores for piece production of the heavy castings. The environmental impact of the technology of making moulds and cores in sands with chemical binders, used most often in piece production of large castings poured from iron alloys, was highlighted. As an alternative technology of mould preparation for the piece production of castings, the ecological and economic aspects of the full mould process were presented.

  5. Male veterans with PTSD exhibit aberrant neural dynamics during working memory processing: an MEG study.

    Science.gov (United States)

    McDermott, Timothy J; Badura-Brack, Amy S; Becker, Katherine M; Ryan, Tara J; Khanna, Maya M; Heinrichs-Graham, Elizabeth; Wilson, Tony W

    2016-06-01

    Posttraumatic stress disorder (PTSD) is associated with executive functioning deficits, including disruptions in working memory. In this study, we examined the neural dynamics of working memory processing in veterans with PTSD and a matched healthy control sample using magnetoencephalography (MEG). Our sample of recent combat veterans with PTSD and demographically matched participants without PTSD completed a working memory task during a 306-sensor MEG recording. The MEG data were preprocessed and transformed into the time-frequency domain. Significant oscillatory brain responses were imaged using a beamforming approach to identify spatiotemporal dynamics. Fifty-one men were included in our analyses: 27 combat veterans with PTSD and 24 controls. Across all participants, a dynamic wave of neural activity spread from posterior visual cortices to left frontotemporal regions during encoding, consistent with a verbal working memory task, and was sustained throughout maintenance. Differences related to PTSD emerged during early encoding, with patients exhibiting stronger α oscillatory responses than controls in the right inferior frontal gyrus (IFG). Differences spread to the right supramarginal and temporal cortices during later encoding where, along with the right IFG, they persisted throughout the maintenance period. This study focused on men with combat-related PTSD using a verbal working memory task. Future studies should evaluate women and the impact of various traumatic experiences using diverse tasks. Posttraumatic stress disorder is associated with neurophysiological abnormalities during working memory encoding and maintenance. Veterans with PTSD engaged a bilateral network, including the inferior prefrontal cortices and supramarginal gyri. Right hemispheric neural activity likely reflects compensatory processing, as veterans with PTSD work to maintain accurate performance despite known cognitive deficits associated with the disorder.

  6. Gas turbine combustor exit piece with hinged connections

    Science.gov (United States)

    Charron, Richard C.; Pankey, William W.

    2016-04-26

    An exit piece (66) with an inlet throat (67) that conducts a combustion gas flow (36A) in a path (82) from a combustor (63) to an annular chamber (68) that feeds the first blade section (37) of a gas turbine (26). The exit piece further includes an outlet portion (69) that forms a circumferential segment of the annular chamber. The outlet portion interconnects with adjacent outlet portions by hinges (78A, 78B, 80A, 80B). Each hinge may have a hinge axis (82A, 82B) parallel to a centerline (21) of the turbine. Respective gas flows (36A) are configured by an assembly (60) of the exit pieces to converge on the feed chamber (68) into a uniform helical flow that drives the first blade section with minimal circumferential variations in force.

  7. Labour's missing pieces ?

    Energy Technology Data Exchange (ETDEWEB)

    Cook, D.

    2007-05-15

    Economic development has been thriving in Alberta since the mid-1990s, but recent concerns are focusing on a shortage of labour and skilled workers. With the aging baby boom generation, the shortage is expected to worsen to nearly 100,000 workers in the next decade, particularly as scheduled oilsands project and the construction of five heavy oil upgraders begin. Alberta's Occupational Supply model forecasts that by 2016, Alberta will create 400,000 jobs, yet only 291,000 workers will enter the labour force by this time. Several employers have applied to the federal government to hire temporary foreign works to abate the labour shortage. However, they must first prove that they have tried unsuccessfully to hire a Canadian worker. The Alberta provincial government plays a role in employment standards, workplace safety and health care. Alberta Employment, Immigration and Industry (AEII) has suggested that there may be enough Canadian workers with the right skills, but they do not accept employment for many reasons, such as family considerations, the location or scope of the job or medical issues. The president of the Alberta Federation of Labour suggested that the provincial government is creating a tighter labour market by refusing to set a more reasonable pace for oilsands development. This in turn has created incentives for energy companies to build their upgraders and refineries in the United States instead of Alberta. It was argued that a more reasonable pace of development would also bring down construction costs and make Alberta an attractive place to build value-added facilities in the long term. It was also argued that loose government rules are facilitating the use of temporary foreign workers as tools to bring down wages and bypass unionized workers. As such, the shortage is not of skilled labour in Alberta, but rather a shortage of cheap labour. The challenge lies in meeting the labour needs for certain trades, such as electricians, pipefitters

  8. Status report on the land processes aircraft science management operations working group

    Science.gov (United States)

    Lawless, James G.; Mann, Lisa J.

    1991-01-01

    Since its inception three years ago, the Land Processes Aircraft Science Management Operations Working Group (MOWG) provided recommendations on the optimal use of the Agency's aircraft in support of the Land Processes Science Program. Recommendations covered topics such as aircraft and sensor usage, development of long-range plans, Multisensor Airborne Campaigns (MAC), program balance, aircraft sensor databases, new technology and sensor development, and increased University scientist participation in the program. Impacts of these recommendations improved the efficiency of various procedures including the flight request process, tracking of flight hours, and aircraft usage. The group also created a bibliography focused on publications produced by Land Processes scientists from the use of the aircraft program, surveyed NASA funded PI's on their participation in the aircraft program, and developed a planning template for multi-sensor airborne campaigns. Benefits from these activities are summarized.

  9. Importance of Cognitive and Affective Processes when Working with a Computer

    Directory of Open Access Journals (Sweden)

    Blaž Trbižan

    2013-06-01

    Full Text Available Research Question (RQ: Why and how to measure human emotions when working and learning with a computer? Are machines (computers, robots implementing such binary records, where there is a simulation of cognitive phenomena and their processes, or do they actually reflect, therefore, able to think?Purpose: Show the importance of cognitive and affective processes of computer and ICT usage, both in learning and in daily work tasks.Method: Comparative method, where scientific findings were compared and based on these conclusions were drawn.Results: An individual has an active role and the use of ICT enables, through the processes of reflection and exchanges of views, for an individual to resolve problems and consequently is able to achieve excellent results at both the personal (educational level and in business. In learning and working with computers, individuals needinternal motivation. Internal motivation can be increased with positive affective processes that also positively influence cognitive processes.Organization:Knowledge of generational characteristics is currently becoming a competitive advantage of organizations. Younger generations are growing up with computers and both teachers and managers have to beaware and accommodate their teaching and business processes to the requirements of ICT.Society: In the 21st century we live in a knowledge society that is unconditionally connected and dependent on the development of information technology. Digital literacy is an everyday concept that society also is aware of and training programmes are being offered on computer literacy for all generations.Originality: The paper presents a concise synthesis of research and authors points of views recorded over the last 25 years and these are combined with our own conclusions based on observations.Limitations/Future Research:The fundamental limitation is that this is a comparative research study that compares the views and conclusions of different authors

  10. The school librarian in the process of research work performed by young people

    Directory of Open Access Journals (Sweden)

    Jože Škorjanc

    1997-01-01

    Full Text Available The research is based on the analysis of research work carried out by young people, with the special stress on the movement The Young for the Progress of Celje and the research work of the pupils of the Celje-Center High School and upon the analysis of the role of Celje Library and the Library of Celje-Center High School in the system of research activities.The role of librarians in the process of research work will have to be strengthened on the basis of practical experience. This will largely depend upon themselves,teachers - mentors, libraries, schools and, last but not least, upon school and cultural policy. The role of librarians in the frame of school research work should be strengthened because of the following facts: 1. Research work is expanding and concentrating in schools, 2. The number of school librarians and school libraries has grown, as well as their equipment (having a librarian has become a school norm, 3. The development of information structure is remarkable, and 4. New,modern approaches towards research work are gaining importance.

  11. Disorders of working memory and selected cognitive processes inpatients treated for paranoid schizophrenia

    Directory of Open Access Journals (Sweden)

    Damian Giętkowski

    2012-03-01

    Full Text Available Already since the times of Baddeley and Hitch the dorsolateral part of the frontal lobe was regarded as the function‑ al centre of the working memory. Working memory disorders are, on the other hand, one of the basic and consoli‑ dated disorders in the course of paranoid schizophrenia. The concept of neurodevelopmental schizophrenia com‑ bines these elements and associates the illness with the changes occurring in the brain in the prenatal period. The efficiency of the working memory system, which acts as a buffer manipulating with the possessed and inflowing information, influences the quality of other cognitive processes, such as long‑term memory, short‑term memory, con‑ centration and thinking. A study was performed on two groups: one experimental consisting of 31 people suffering from paranoid schizophrenia and one control group of 31 healthy people. In both groups a replica of Wisconsin Card Sorting Task was used in order to measure the efficiency of the working memory and selected tests from WAIS‑R (PL: the Polish adaptation of Wechsler Adult Intelligence Scale to assess the functioning of concentration, memory and thinking. The results of the study showed that in the experimental group the efficiency of the working memory is very low and that the illness affects the performance of concentration, memory and thinking. Moreover the tests proved that the working memory disorder increases with time.

  12. Attention allocation: Relationships to general working memory or specific language processing.

    Science.gov (United States)

    Archibald, Lisa M D; Levee, Tyler; Olino, Thomas

    2015-11-01

    Attention allocation, updating working memory, and language processing are interdependent cognitive tasks related to the focused direction of limited resources, refreshing and substituting information in the current focus of attention, and receiving/sending verbal communication, respectively. The current study systematically examined the relationship among executive attention, working memory executive skills, and language abilities while adjusting for individual differences in short-term memory. School-age children completed a selective attention task requiring them to recall whether a presented shape was in the same place as a previous target shape shown in an array imposing a low or high working memory load. Results revealed a selective attention cost when working above but not within memory span capacity. Measures of general working memory were positively related to overall task performance, whereas language abilities were related to response time. In particular, higher language skills were associated with faster responses under low load conditions. These findings suggest that attentional control and storage demands have an additive impact on working memory resources but provide only limited evidence for a domain-general mechanism in language learning. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

  13. AMCCOM (Army Armament, Munitions and Chemical Command) Management Study of Procurement Work Directive (PWD) Processing Costs

    Science.gov (United States)

    1988-05-23

    UNIT ELEMENT NO. NO. NO. ACCESSION NO. 22898. KAOO I i 11. TITLE (Include Security Classification) Procurement Work Directive (PWD) Processing Cost Study...8217. ’C Accession For NT IS GRA&I DTIC TAB QUALITY Uitnnounced 2C’ Jutification D" ...- sD T IC"" Availi~dlity Codes ELECTC AVf1and/or I’, ’A’i:, d/r...FLOW PROCESS CHART i r- "F N IO 1. 0 F A.P OtIc S. SUMMARY 0O PERATION 7. CHART BrGINS A. CHART ENDS TRANSPORTAIONS INSETIONS I 9. CHIART D my

  14. Individual reactions to high involvement work processes: investigating the role of empowerment and perceived organizational support.

    Science.gov (United States)

    Butts, Marcus M; Vandenberg, Robert J; DeJoy, David M; Schaffer, Bryan S; Wilson, Mark G

    2009-04-01

    This study sought to understand how high involvement work processes (HIWP) are processed at the employee level. Using structural equation modeling techniques, the authors tested and supported a model in which psychological empowerment mediated the effects of HIWP on job satisfaction, organizational commitment, job performance, and job stress. Furthermore, perceived organizational support (POS) was hypothesized to moderate the relationships between empowerment and these outcomes. With exception for the empowerment-job satisfaction association, support was found for our predictions. Future directions for research and the practical implications of our findings for both employees and organizations are discussed.

  15. Organization of school work in focus: the limits of antidemocratic inheritance and potential of participatory processes

    Directory of Open Access Journals (Sweden)

    Maria Vieira Silva

    2011-10-01

    Full Text Available Historically, democratic and participatory processes in the Brazilian society, and specifically in school, have been permeated by intermittences, weaknesses and resistances caused by multiple determinations. The text focuses on aspects concerningthe organization of education work through two lines of analysis: the first angle refers to the social constructs of structural and organic nature linked to relations of power andanti-democratic practices of the society in general. The second angle reference to a kindof ethnographic research, conducted within a public school in the Minas Gerais state. We seek to grasp the challenges on building practices and strategies in support of the participatory processes of the school community in the pedagogic project design and in the operation of the school board. We propose, with these analyses, to contribute withreflections on the status of teachers, as a subject, in the school organization throughconnections with work activities related to their everyday practice.

  16. Processing speed and visuospatial executive function predict visual working memory ability in older adults.

    Science.gov (United States)

    Brown, Louise A; Brockmole, James R; Gow, Alan J; Deary, Ian J

    2012-01-01

    BACKGROUND/STUDY CONTEXT: Visual working memory (VWM) has been shown to be particularly age sensitive. Determining which measures share variance with this cognitive ability in older adults may help to elucidate the key factors underlying the effects of aging. Predictors of VWM (measured by a modified Visual Patterns Test) were investigated in a subsample (N = 44, mean age = 73) of older adults from the Lothian Birth Cohort 1936 (LBC1936; Deary et al., 2007 , BMC Geriatrics, 7, 28). Childhood intelligence (Moray House Test) and contemporaneous measures of processing speed (four-choice reaction time), executive function (verbal fluency; block design), and spatial working memory (backward spatial span), were assessed as potential predictors. All contemporaneous measures except verbal fluency were significantly associated with VWM, and processing speed had the largest effect size (r = -.53, p material are also important.

  17. Research in Social Work: the future in the present. Reflections on the portuguese knowledge building process

    Directory of Open Access Journals (Sweden)

    Raquel Marta

    2016-06-01

    Full Text Available The debate surrounding the construction of scientific knowledge within social work is discussed. The social work class seeks new foundations that allow within the context of structural change, the strengthening of professional identity and challenge of the vestiges of intellectual segregation that historical constraints have left. This paper seeks to outline a research strategy for reconciliation and coordination of intellectual and professional work in order to give visibility to new and different domains of interpretation and action, while claiming that considering pluri-perspectives potentiates the knowledge transformation process. Underlining this confluence of complex thinking elements, this article incorporates the space-time dimension and discusses and recognizes the unavoidable circularity as a way to interrogate knowledge that is compartmentalized and fragmented, placing an emphasis both on knowledge and on the interrelationship between knowing, doing, being and relating. In addition, examines the recognition of the nature of those relationships among various disciplines and perspectives.

  18. Developing an EPQ Model with Considering Preventive Maintenance, Imperfect Product, Shortage and Work in Process Inventory

    Directory of Open Access Journals (Sweden)

    Akbar Nilipour Tabatabaei

    2013-08-01

    Full Text Available Determination of optimal production lot size has been always noticed by researchers and various models have been proposed in this area. Among the subjects, which has been less considered in these models is machine failure. Obviously, a machine may encounter random failures during its working period and this makes clear the need for applying an appropriate maintenance policy for the machinery. In this paper based on assumptions such as authorized shortage, work in process inventory and possibility of producing defective products with and without the ability to re-work, EPQ model has been investigated and developed to select Preventive Maintenance (PM policy for the machinery. In addition, by minimizing system’s total cost over a period of time, a formula has been presented for determining optimal production lot size and its application has been examined using various numerical examples.

  19. Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach

    OpenAIRE

    Miao, Yongwu; Sloep, Peter; Koper, Rob

    2009-01-01

    Miao, Y., Sloep, P. B., & Koper, R. (2010). Facilitating Work Based Learning Projects: A Business Process Oriented Knowledge Management Approach. In D. Griffiths & R. Koper (Eds.), Rethinking Learning and Employment at a Time of Economic Uncertainty. Proceedings of the 6th TENCompetence Open workshop (pp. 22-33). November, 19-20, 2009, Manchester, UK. Bolton, UK: Institute for Educational Cybernetics, The University of Bolton. For the complete book please see http://hdl.handle.net/1820/3191

  20. Work function tuning for high-performance solution-processed organic photodetectors with inverted structure.

    Science.gov (United States)

    Saracco, Emeline; Bouthinon, Benjamin; Verilhac, Jean-Marie; Celle, Caroline; Chevalier, Nicolas; Mariolle, Denis; Dhez, Olivier; Simonato, Jean-Pierre

    2013-12-03

    Organic photodetectors with inverted structure are fabricated by solution process techniques. A very thin interfacing layer of polyethyleneimine leads to a homogenous interface with low work function. The devices exhibit excellent performances, in particular in terms of low dark current density, wide range linearity, high detectivity, and remarkable stability in ambient air without encapsulation. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Optimization of WEDM process parameters using deep cryo-treated Inconel 718 as work material

    Directory of Open Access Journals (Sweden)

    Bijaya Bijeta Nayak

    2016-03-01

    Full Text Available The present work proposes an experimental investigation and optimization of various process parameters during taper cutting of deep cryo-treated Inconel 718 in wire electrical discharge machining process. Taguchi's design of experiment is used to gather information regarding the process with less number of experimental runs considering six input parameters such as part thickness, taper angle, pulse duration, discharge current, wire speed and wire tension. Since traditional Taguchi method fails to optimize multiple performance characteristics, maximum deviation theory is applied to convert multiple performance characteristics into an equivalent single performance characteristic. Due to the complexity and non-linearity involved in this process, good functional relationship with reasonable accuracy between performance characteristics and process parameters is difficult to obtain. To address this issue, the present study proposes artificial neural network (ANN model to determine the relationship between input parameters and performance characteristics. Finally, the process model is optimized to obtain a best parametric combination by a new meta-heuristic approach known as bat algorithm. The results of the proposed algorithm show that the proposed method is an effective tool for simultaneous optimization of performance characteristics during taper cutting in WEDM process.

  2. Aging and prospective memory: the role of working memory and monitoring processes.

    Science.gov (United States)

    Bisiacchi, Patrizia S; Tarantino, Vincenza; Ciccola, Alessia

    2008-12-01

    Remembering to execute an earlier planned action is essential in everyday life, and is a prerequisite for independent living in old age. The purpose of the present study was to determine the influence of age in performing a prospective memory (PM) task and to analyze the differential contribution of working memory and attentional monitoring demands. In Experiment 1, a group of young and two groups of old adults were assigned to one of two low-demanding conditions: a picture-naming task (only-Naming) and a picture-naming plus a PM task (Naming+PM). In Experiment 2, a group of young and two groups of old adults performed one of two high-demanding conditions, in which working memory and attentional monitoring processes were examined, using a listening span-like task and a 1-back task within the PM paradigm of Experiment 1. Prospective memory performance declined with age even in the low-demanding condition (Experiment 1). Young participants showed PM failures only when the 1-back task was added to the low-demanding condition. Older participants exhibited a marked decline, particularly in the working memory load condition. These results suggest that even low-demanding prospective memory tasks are resource-consuming in old age, and that working memory efficiency, affected by the aging process, plays a crucial role in the successful accomplishment of PM actions.

  3. The effect of state worry and trait anxiety on working memory processes in a normal sample.

    Science.gov (United States)

    Walkenhorst, Elizabeth; Crowe, Simon F

    2009-03-01

    This study investigated the effects of trait anxiety and state worry on working memory performance in a normal sample. Phase one investigated the effects of trait anxiety and state worry on the capacity of specific working memory components. Phase two investigated the validity of Eysenck and Calvo's (1992) Processing Efficiency Theory of worry. Sixty adult participants (40 females and 20 males with a mean age of 26 years) were assigned to a 2 (trait anxiety: Low vs. high)x2 (state worry: Low vs. high) between-subjects design. Contrary to prediction, worry did not lead to a decrement in performance on verbal working memory tasks but unexpectedly enhanced performance on visual tasks in participants with low trait anxiety (LTA). The results were also in opposition to expectations for Phase two. Individuals in the conditions of high trait anxiety and/or high state worry (LTA/HW, HTA/LW, and HTA/HW) displayed shorter response latencies than individuals in the LTA and low state worry (LTA/LW) condition on both verbal and spatial working memory (i.e., N-back) tasks. Although non-pathological worry is predominantly a verbal-linguistic activity, it may also be complemented by the processing of visual imagery which facilitates problem-solving and adaptive functions.

  4. Ergonomic Design Measures on Work Process and Workplace Layout in the Selected Structural and Fabrication Shops

    Directory of Open Access Journals (Sweden)

    Suzette M. Mercado

    2015-11-01

    Full Text Available The study aimed to analyze the process and workplace layout in the selected structural and fabrication shops located in Batangas, Philippines thus provide improvements using the results of Ergonomic Design Measures. These shops generally focused on preparation, cutting, welding, grinding and assembly using multi-functioning machines and many aspects of human work. Using different Ergonomic Assessment Checklist, Rapid Entire Body Assessment (REBA, Rapid Upper Limb Assessment (RULA and Ovako Working Posture Assessment System (OWAS, and with direct observations, it was found out that existing design of the work processes and workplace layout does not match the ergonomic requirements. The study exposed the presence of Musculoskeletal Disorder (MSD risks due to awkward posture, forceful exertion and fatigue; position of workers is dangerous to themselves due to inappropriate measurement of facilities which is in need of change. The researcher recommended ergonomically based actions to address the health, comfort, and well-being of employees such as changing the workstation surface height, integration of safeguarding; application of Group Technology to reduce the production lead time and material handling and offered smooth workflow in production line. Furthermore, the researcher developed a proposed workstation and workplace design as part of the ergonomic-based actions. The effectiveness of the proposed design alternatives were measured with the use of Trade-off Analysis technique, such as, Standard Weighted Sum Method, MAXIMIN decision and Analytic Hierarchy Process.

  5. Working memory processing of traumatic material in women with posttraumatic stress disorder.

    Science.gov (United States)

    Landré, Lionel; Destrieux, Christophe; Andersson, Frédéric; Barantin, Laurent; Quidé, Yann; Tapia, Géraldine; Jaafari, Nematollah; Clarys, David; Gaillard, Philippe; Isingrini, Michel; El-Hage, Wissam

    2012-02-01

    Posttraumatic stress disorder (PTSD) is associated with medial frontal and amygdala functional alterations during the processing of traumatic material and frontoparietal dysfunctions during working memory tasks. This functional magnetic resonance imaging (fMRI) study investigated the effects of trauma-related words processing on working memory in patients with PTSD. We obtained fMRI scans during a 3-back task and an identity task on both neutral and trauma-related words in women with PTSD who had been sexually abused and in healthy, nonexposed pair-matched controls. Seventeen women with PTSD and 17 controls participated in the study. We found no behavioural working memory deficit for the PTSD group. In both tasks, deactivation of posterior parietal midline regions was more pronounced in patients than controls. Additionally, patients with PTSD recruited the left dorsolateral frontal sites to a greater extent during the processing of trauma-related material than neutral material. This study included only women and did not include a trauma-exposed non-PTSD control group; the results may, therefore, have been influenced by sex or by effects specific to trauma exposure. Our results broadly confirm frontal and parietal functional variations in women with PTSD and suggest a compensatory nature of these variations with regard to the retreival of traumatic memories and global attentional deficits, respectively, during cognitively challenging tasks.

  6. Market orientation of the Hungarian SMEs working in the meat processing and dairy industries

    Directory of Open Access Journals (Sweden)

    Polereczki Zs.

    2016-12-01

    Full Text Available We are looking for the answer as to what tendencies were indicative of the future development of required marketing activity of the SMEs in the article dealing with the marketing activity of the SMEs working in the food industry. The article is based on a nationwide survey among 200 SMEs working in the food processing industry. In this article, we focus on the SMEs working in the dairy and meat processing industries. The results of the nationwide research and some domestic references refer to that there is a latent demand of effective marketing activity among small and medium-sized enterprises. It manifests itself in specifying marketing-related fields to be improved in the future. The marketing itself is believed not to be an important field at the same time. This apparent opposition is the small enterprise marketing paradox in the background of which is the lack of knowledge about the marketing instruments. It can be stated that these small businesses collect mainly general market information and have no information about particular products. Therefore, the presence of marketing planning is really rare and where there is some kind of planning it is not connected to available funds and follow-up control. The marketing strategy can be characterized by products processed mainly at low or medium level. Therefore, market position is deffned by “lower price-good quality”. They mainly use the traditional distribution channels and their communication is accidental and has a low level.

  7. Visual and cognitive processing of face information in schizophrenia: detection, discrimination and working memory.

    Science.gov (United States)

    Chen, Yue; Norton, Daniel; McBain, Ryan; Ongur, Dost; Heckers, Stephan

    2009-01-01

    Face recognition involves several physiological and psychological processes, including those in visual, cognitive and affective domains. Studies have found that schizophrenia patients are deficient at recognizing facial emotions, yet visual and cognitive processing of facial information in this population has not been systematically examined. In this study, we examined visual detection, perceptual discrimination and working memory of faces as well as non-face visual objects in patients. Visual detection was measured by accuracy when detecting the presence of a briefly displayed face, image which contained only the basic configural information of a face. Perceptual discrimination was measured by discriminability scores for individual facial identity images, in which the degree of similarity between images was systematically varied via morphing. Working memory was measured by the discriminability scores when two comparison face images were separated by 3 or 10 s. All measurements were acquired using a psychophysical method (two-alternative forced choice). Relative to controls, patients showed significantly reduced accuracy in visual detection of faces (p=0.003), moderately degraded performance in perceptual discrimination of faces (p=0.065), and significantly impaired performance in working memory of faces (pface versions of these tasks, while degraded, was not correlated with performance on face recognition. This pattern of results indicates that greater signal strength is required for visual and cognitive processing of facial information in schizophrenia.

  8. Increased self-awareness in the process of returning to work.

    Science.gov (United States)

    Haugstvedt, Karen Therese Sulheim; Hallberg, Ulrika; Graff-Iversen, Sidsel; Sørensen, Marit; Haugli, Liv

    2011-12-01

    A group of employees on sick leave, living in the Oslo area, Norway, was offered participation in a counselling programme, based on Gestalt theory, mindfulness and phenomenological understanding of the body. To explore the participants' processes of change related to their increased ability to work. METHOD DESIGN: This qualitative study is based on modified grounded theory. A total of 12 female employees, all who had increased work ability 1 year after the programme, participated in open focus-group interviews at the end of the programme. The participants' experiences from processes of change are described through the following categories: becoming more aware of one's own thoughts, emotions and bodily reactions; taking oneself seriously and accepting oneself; being secure enough to face being challenged; realizing new possibilities and choices and trying out new ways of acting. The participants further described what had been helpful in these processes. Experience of a secure setting and open-minded listening seemed important for getting the courage to open up to all reactions. Then, they could explore new ways of thinking, communicating and behaving. Discussing existential issues such as their core values was important. This, together with being allowed to take their own emotions seriously and being challenged by the counsellors, had encouraged the processes of change. The women described how experiences of increased awareness contributed to reconstruction of their self-understanding and opened up for new possibilities. This seemed to have provided them with new ways of communicating and acting, which enhanced participation in work. The context of the learning programme, the existential issues and counselling challenges appeared as essential in these processes of change. The findings give insights into aspects that may be important when designing rehabilitation programmes. © 2011 The Authors. Scandinavian Journal of Caring Sciences © 2011 Nordic College of

  9. Leaching of metals from large pieces of printed circuit boards using citric acid and hydrogen peroxide.

    Science.gov (United States)

    Jadhav, Umesh; Su, C; Hocheng, Hong

    2016-12-01

    In the present study, the leaching of metals from large pieces of computer printed circuit boards (CPCBs) was studied. A combination of citric acid (0.5 M) and 1.76 M hydrogen peroxide (H2O2) was used to leach the metals from CPCB piece. The influence of system variables such as H2O2 concentration, concentration of citric acid, shaking speed, and temperature on the metal leaching process was investigated. The complete metal leaching was achieved in 4 h from a 4 × 4 cm CPCB piece. The presence of citric acid and H2O2 together in the leaching solution is essential for complete metal leaching. The optimum addition amount of H2O2 was 5.83 %. The citric acid concentration and shaking speed had an insignificant effect on the leaching of metals. The increase in the temperature above 30 °C showed a drastic effect on metal leaching process.

  10. Working Memory Load Affects Processing Time in Spoken Word Recognition: Evidence from Eye-Movements.

    Science.gov (United States)

    Hadar, Britt; Skrzypek, Joshua E; Wingfield, Arthur; Ben-David, Boaz M

    2016-01-01

    In daily life, speech perception is usually accompanied by other tasks that tap into working memory capacity. However, the role of working memory on speech processing is not clear. The goal of this study was to examine how working memory load affects the timeline for spoken word recognition in ideal listening conditions. We used the "visual world" eye-tracking paradigm. The task consisted of spoken instructions referring to one of four objects depicted on a computer monitor (e.g., "point at the candle"). Half of the trials presented a phonological competitor to the target word that either overlapped in the initial syllable (onset) or at the last syllable (offset). Eye movements captured listeners' ability to differentiate the target noun from its depicted phonological competitor (e.g., candy or sandal). We manipulated working memory load by using a digit pre-load task, where participants had to retain either one (low-load) or four (high-load) spoken digits for the duration of a spoken word recognition trial. The data show that the high-load condition delayed real-time target discrimination. Specifically, a four-digit load was sufficient to delay the point of discrimination between the spoken target word and its phonological competitor. Our results emphasize the important role working memory plays in speech perception, even when performed by young adults in ideal listening conditions.

  11. Working memory load affects processing time in spoken word recognition: Evidence from eye-movements

    Directory of Open Access Journals (Sweden)

    Britt eHadar

    2016-05-01

    Full Text Available In daily life, speech perception is usually accompanied by other tasks that tap into working memory capacity. However, the role of working memory on speech processing is not clear. The goal of this study was to examine how working memory load affects the timeline for spoken word recognition in ideal listening conditions. We used the ‘visual world’ eye-tracking paradigm. The task consisted of spoken instructions referring to one of four objects depicted on a computer monitor (e.g. point at the candle. Half of the trials presented a phonological competitor to the target word that either overlapped in the initial syllable (onset or at the last syllable (offset. Eye movements captured listeners’ ability to differentiate the target noun from its depicted phonological competitor (e.g., candy or sandal. We manipulated working memory load by using a digit pre-load task, where participants had to retain either one (low-load or four (high-load spoken digits for the duration of a spoken word recognition trial. The data show that the high-load condition delayed real-time target discrimination. Specifically, a four-digit load was sufficient to delay the point of discrimination between the spoken target word and its phonological competitor. Our results emphasize the important role working memory plays in speech perception, even when performed by young adults in ideal listening conditions.

  12. Stronger activation and deactivation in archery experts for differential cognitive strategy in visuospatial working memory processing.

    Science.gov (United States)

    Seo, Jeehye; Kim, Yang-Tae; Song, Hui-Jin; Lee, Hui Joong; Lee, Jongmin; Jung, Tae-Du; Lee, Gunyoung; Kwon, Eunjin; Kim, Jin Gu; Chang, Yongmin

    2012-04-01

    It is well known that elite athletes have higher performance in perception, planning, and execution in sports activities relative to novices. It remains controversial, however, whether any differences in basic cognitive functions between experts and novices exist. Furthermore, few studies have directly used functional magnetic resonance imaging (fMRI) to investigate neural activation and deactivation differences between experts and novices while performing visuospatial working memory (WM) tasks. Therefore, the purpose of this study was to examine possible differences in neural activation and deactivation associated with working memory components in processing visuospatial information between archery experts and novices. To this end, we employed a judgment of line orientation (JLO) task, which has a strong WM component. With regard to brain activation, archery experts displayed higher activation in cortical areas associated with visuospatial attention and working memory, including the middle frontal cortex, supplemental motor area, and dorsolateral prefrontal cortex than that of the novices during the performance of the JLO task. With regard to brain deactivation, archery experts exhibited stronger task-related deactivation in cortical areas, such as the paracentral cortex/precuneus and the anterior and posterior cingulate cortex related to the default network, than that of the novices. These results suggest that the archery experts have a strategy that demands greater use of neural correlates associated with visuospatial working memory and attention in addition to greater use of DMN in visuospatial working memory task not directly tied to their domain of expertise. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Infantile Literature: the work with the process of moral values construction, in the infantile education.

    Directory of Open Access Journals (Sweden)

    Áurea Maria de Oliveira

    2007-10-01

    Full Text Available The act of telling histories is one of the pedagogical activities that compose the didactic actions developed in the preschool age period. We start by the thought that the educator’s identification of the scenes that can unchain a moral discussion, as well as, the organization of a pedagogical action, by the judgment of the character’s actions, propitiates an adjusted environment for the work with the citizenship formation process. With this intention the present article has as objective to argue, from the Piaget’s theoretical referential on the process of the moral development, the use of Infantile Literature texts as ways for the organization of an educative action with the process of the infantile morality evolution. We select for the organization of this work three moments: the contextualization of the theoretical referential; the presentation of two texts, in which the educator can identify, in the plot of the histories, scenes that are possible to unchain a moral discussion; the election of a Literature text that was submitted to the child with the intention of demonstrating the educator’s intervention in the construction process of the dialogue, the argument and the confrontation of divergent points of view, aiming at the co-ordination of different perspectives.

  14. Speech segmentation by statistical learning is supported by domain-general processes within working memory.

    Science.gov (United States)

    Palmer, Shekeila D; Mattys, Sven L

    2016-12-01

    The purpose of this study was to examine the extent to which working memory resources are recruited during statistical learning (SL). Participants were asked to identify novel words in an artificial speech stream where the transitional probabilities between syllables provided the only segmentation cue. Experiments 1 and 2 demonstrated that segmentation performance improved when the speech rate was slowed down, suggesting that SL is supported by some form of active processing or maintenance mechanism that operates more effectively under slower presentation rates. In Experiment 3 we investigated the nature of this mechanism by asking participants to perform a two-back task while listening to the speech stream. Half of the participants performed a two-back rhyme task designed to engage phonological processing, whereas the other half performed a comparable two-back task on un-nameable visual shapes. It was hypothesized that if SL is dependent only upon domain-specific processes (i.e., phonological rehearsal), the rhyme task should impair speech segmentation performance more than the shape task. However, the two loads were equally disruptive to learning, as they both eradicated the benefit provided by the slow rate. These results suggest that SL is supported by working-memory processes that rely on domain-general resources.

  15. Storage and Processing Working Memory Functions in Alzheimer-Type Dementia

    Directory of Open Access Journals (Sweden)

    T. Vecchi

    1999-01-01

    Full Text Available A selective deterioration of working memory functions has been suggested as an explanation of the cognitive decay occurring in normal ageing as well as in Alzheimer-type dementia. Recent studies have highlighted that elderly people’s limitations in working memory functions may be better interpreted when analysing the specific characteristics of the cognitive process (i.e., passive storage or active manipulation of information. In the present study, we have adapted a procedure used to investigate age-related memory modifications, involving both verbal and visuo-spatial material in tasks tapping passive and active processes, to investigate the deterioration associated with Alzheimer's disease. A group of Alzheimer patients in the early stages of the disease were matched to a control group of healthy elderly. Results show that Alzheimer patients performed less accurately than the control group in all tasks. However, the deficit was maximised in the case of active processes, regardless of the type of material used (verbal or visuo-spatial. These data highlight the importance of considering the amount of active processing as the key variable when interpreting the decay in cognitive functions in the early stages of Alzheimer’s disease.

  16. PROCESS FEATURES OF FLUCTUATIONS PROPAGATION AT STRESS-STRAIN WORK OF THE RAILWAY TRACK

    Directory of Open Access Journals (Sweden)

    I. O. Bondarenko

    2015-12-01

    Full Text Available Purpose. Scientific work aims at the determination the basic laws of fluctuations propagation process from exitation of rolling stock in the design system of permanent way and substructures of the railway lines for studing the deformation processes as the basis for a regulatory framework of the track operation in the conditions of ensuring the reliability of railways. Methodology. To achieve the aim the principles of elasticity theories and wave propagation process in describing the interaction track and rolling stock were applied. Findings. The kinds of fluctuations and system which should be used when considering the fluctuations in the deformation process of rail track were established. The general view of the displacement function was determined. Originality. The theoretical concepts and principles to consider fluctuations of a structures system of permanent way and substructures of the railway track, energised by rolling stock were grounded. This will allow studing the process of deformation work of the mentioned system, which changes its state. That in turn will allow us to determine the parameters of the trains functional reliability, as part of the security passes of rolling stock on the track section with regard to its technical condition. Practical value. Usually for safe crossing of rolling stock parameters of fluctuation process in the system «vehicle-track» are determined. Existing models or carefully consider fluctuations of rolling stock in generalized characteristics of the structures of permanent way and substructures of the railway tracks or view of quasi-dynamic fluctuations rails with general characteristics of under rail base. This review process of oscillations, energised by rolling stock and delivered to all the elements of the permanent way and substructures of the railway track do not allow determining both the reliability parameters of elements in the system of track construction and parameters of functional

  17. METHODS FOR ORGANIZATION OF WORKING PROCESS FOR GAS-DIESEL ENGINE

    Directory of Open Access Journals (Sweden)

    G. A. Vershina

    2017-01-01

    Full Text Available Over the past few decades reduction in pollutant emissions has become one of the main directions for further deve- lopment of engine technology. Solution of such problems has led to implementation of catalytic post-treatment systems, new technologies of fuel injection, technology for regulated phases of gas distribution, regulated turbocharger system and, lately, even system for variable compression ratio of engine. Usage of gaseous fuel, in particular gas-diesel process, may be one of the means to reduce air pollution caused by toxic substances and meet growing environmental standards and regulations. In this regard, an analysis of methods for organization of working process for a gas-diesel engine has been conducted in the paper. The paper describes parameters that influence on the nature of gas diesel process, it contains graphics of specific total heat consumption according to ignition portion of diesel fuel and dependence of gas-diesel indices on advance angle for igni-tion portion injection of the diesel fuel. A modern fuel system of gas-diesel engine ГД-243 has been demonstrated in the pa- per. The gas-diesel engine has better environmental characteristics than engines running on diesel fuel or gasoline. According to the European Natural & bio Gas Vehicle Association a significant reduction in emissions is reached at a 50%-substitution level of diesel fuel by gas fuel (methane and in such a case there is a tendency towards even significant emission decrease. In order to ensure widespread application of gaseous fuel as fuel for gas-diesel process it is necessary to develop a new wor- king process, to improve fuel equipment, to enhance injection strategy and fuel supply control. A method for organization of working process for multi-fuel engine has been proposed on the basis of the performed analysis. An application has been submitted for a patent.

  18. Binge drinking affects attentional and visual working memory processing in young university students.

    Science.gov (United States)

    Crego, Alberto; Holguín, Socorro Rodriguez; Parada, María; Mota, Nayara; Corral, Montserrat; Cadaveira, Fernando

    2009-11-01

    Binge Drinking (BD) typically involves heavy drinking over a short time, followed by a period of abstinence, and is common among young people, especially university students. Animal studies have demonstrated that this type of alcohol consumption causes brain damage, especially in the nonmature brain. The aim of the present study was to determine how BD affects brain functioning in male and female university students, during the performance of a visual working memory task. Event-related potentials (ERPs) were recorded, with an extensive set of 32 scalp electrodes, in 95 first-year university students (age range 18 to 20 years), comprising 42 binge drinkers (BD) and 53 controls, in a visual "identical pairs" continuous performance task. Principal components analysis was used to identify and analyze the N2 (negative waveform with a latency around 200 to 300 ms related to attentional processes) and P3 (positive waveform with a latency around 300 to 600 ms related to working memory processes) components of the ERPs. In the matching condition of the task, the N2 component in central and parietal regions was significantly larger in the BD than in the control group. In the control group, the P3 component was larger in the matching than in the nonmatching condition in the frontal, central, and parietal regions, whereas the BD group did not show any significant differences between conditions in any region. The results of this study confirm the presence of electrophysiological differences between young university student binge drinkers and controls during the execution of a visual task with a high working memory load. The larger N2 in the BD group suggests higher levels of attentional effort required by this group to perform the task adequately. The absence of any differences in the P3 component in the different conditions (matching and nonmatching stimuli) in the BD group suggests a deficiency in the electrophysiological differentiation between relevant and irrelevant

  19. Clarifying Work-Family Intervention Processes: The Roles of Work-Family Conflict and Family Supportive Supervisor Behaviors

    Science.gov (United States)

    Hammer, Leslie B.; Kossek, Ellen E.; Anger, W. Kent; Bodner, Todd; Zimmerman, Kristi L.

    2010-01-01

    Drawing on a conceptual model integrating research on training, work-family interventions, and social support, we conducted a quasi-experimental field study to assess the impact of a supervisory training and self-monitoring intervention designed to increase supervisors' use of family supportive supervisor behaviors. Pre- and post-intervention surveys were completed, nine months apart, by 239 employees at six intervention (N = 117) and six control (N = 122) grocery store sites. Thirty-nine supervisors in the six intervention sites received the training consisting of one hour of self-paced computer-based training, one hour of face-to-face group training, followed by instructions for behavioral self-monitoring (recording the frequency of supportive behaviors) to support on-the-job transfer. Results demonstrated a disordinal interaction for the effect of training and family-to-work conflict on employee job satisfaction, turnover intentions and physical health. In particular, for these outcomes, positive training effects were observed for employees with high family-to-work conflict, while negative training effects were observed for employees with low family-to-work conflict. These moderation effects were mediated by the interactive effect of training and family-to-work conflict on employee perceptions of family-supportive supervisor behaviors. Implications of our findings for future work-family intervention development and evaluation are discussed. PMID:20853943

  20. Sigtuna Think Piece 2 Climate Capabilities and Climate Change ...

    African Journals Online (AJOL)

    This think piece introduces the views of Amartya Sen, Martha Nussbaum and others on the capabilities approach to climate change ethics research. Furthermore, it suggests that the capabilities approach can help climate change research in identifying if, and if so which, intrinsic values of people's wellbeing are vulnerable ...

  1. Sigtuna Think Piece 5 Climate Change within Education for ...

    African Journals Online (AJOL)

    This think piece describes a way of including climate change within education for sustainable development (ESD), with a specific ambition to illuminate the moral dimension in a locally relevant way in the teaching. A method – ethical tendency discourse analysis – for creating a locally relevant teaching content that ...

  2. Sigtuna Think Piece 10 Reflections on the Sigtuna Climate Change ...

    African Journals Online (AJOL)

    Our contribution to the think pieces also provides a 'lens' for reading or thinking about how young students are embarking into the world of both the challenge of climate change and the necessary transformations that need to be made in education to reflect the required knowledge to both prevent and mitigate the effects of ...

  3. Three-piece Inflatable Penile Prosthesis: Surgical Techniques and ...

    African Journals Online (AJOL)

    implantation of the three-piece inflatable penile prosthesis and point out the major surgical pitfalls accompanying this procedure and their specific management. The psychological outcome of penile prosthesis surgery is also discussed. Different surgical approaches are available when performing the procedure. A number ...

  4. Three-piece Inflatable Penile Prosthesis: Surgical Techniques and ...

    African Journals Online (AJOL)

    Penile prosthesis surgery plays a vital role in the treatment of erectile dysfunction (ED). As far as outcome is concerned, it is one of the most rewarding procedures for both patients and surgeons. We describe our surgical technique for implantation of the three-piece inflatable penile prosthesis and point out the major surgical ...

  5. A piece of paper falling faster than free fall

    Science.gov (United States)

    Vera, F.; Rivera, R.

    2011-09-01

    We report a simple experiment that clearly demonstrates a common error in the explanation of the classic experiment where a small piece of paper is put over a book and the system is let fall. This classic demonstration is used in introductory physics courses to show that after eliminating the friction force with the air, the piece of paper falls with acceleration g. To test if the paper falls behind the book in a nearly free fall motion or if it is dragged by the book, we designed a version of this experiment that includes a ball and a piece of paper over a book that is forced to fall using elastic cords. We recorded a video of our experiment using a high-speed video camera at 300 frames per second that shows that the book and the paper fall faster than the ball, which falls well behind the book with an acceleration approximately equal to g. Our experiment shows that the piece of paper is dragged behind the book and therefore the paper and book demonstration should not be used to show that all objects fall with acceleration g independently of their mass.

  6. A piece of paper falling faster than free fall

    Energy Technology Data Exchange (ETDEWEB)

    Vera, F; Rivera, R, E-mail: fvera@ucv.cl [Instituto de Fisica, Pontificia Universidad Catolica de ValparaIso, Av. Universidad 330, Curauma, ValparaIso (Chile)

    2011-09-15

    We report a simple experiment that clearly demonstrates a common error in the explanation of the classic experiment where a small piece of paper is put over a book and the system is let fall. This classic demonstration is used in introductory physics courses to show that after eliminating the friction force with the air, the piece of paper falls with acceleration g. To test if the paper falls behind the book in a nearly free fall motion or if it is dragged by the book, we designed a version of this experiment that includes a ball and a piece of paper over a book that is forced to fall using elastic cords. We recorded a video of our experiment using a high-speed video camera at 300 frames per second that shows that the book and the paper fall faster than the ball, which falls well behind the book with an acceleration approximately equal to g. Our experiment shows that the piece of paper is dragged behind the book and therefore the paper and book demonstration should not be used to show that all objects fall with acceleration g independently of their mass.

  7. Woven sculptural piece as added dimension to textile design ...

    African Journals Online (AJOL)

    Woven sculptural piece as added dimension to textile design. ... Mgbakoigba: Journal of African Studies ... However, if adequate attention is given to it, it can be combined with other textile materials, independently to create desirable design, which can compete favorably in the international textile and arts market. Keywords: ...

  8. Sigtuna Think Piece 7 Readings for Climate Change: Ecocriticism ...

    African Journals Online (AJOL)

    This think piece elaborates possible research connections between ecocriticism and climate change educational research, addressing the overarching question of what cultural responses to climate change can offer climate change education and climate change education research. It investigates literary critic Louise ...

  9. Effects of working memory span on processing of lexical associations and congruence in spoken discourse

    Directory of Open Access Journals (Sweden)

    Megan Ann Boudewyn

    2013-02-01

    Full Text Available The goal of this study was to determine whether variability in working-memory capacity and cognitive control affects the processing of global discourse congruence and local associations among words when participants listened to short discourse passages. The final, critical word of each passage was either associated or unassociated with a preceding prime word (e.g. He was not prepared for the fame and fortune/praise. These critical words were also either congruent or incongruent with respect to the preceding discourse context (e.g. a context in which a prestigious prize was won (congruent or in which the protagonist had been arrested (incongruent. We used multiple regression to assess the unique contribution of suppression ability (our measure of cognitive control and working memory capacity on the amplitude of individual N400 effects of congruence and association. Our measure of suppression ability did not predict the size of the N400 effects of association or congruence. However, as expected, the results showed that high working-memory capacity individuals were less sensitive to the presence of lexical associations (showed smaller N400 association effects. Furthermore, differences in working memory capacity were related to differences in the topographic distribution of the N400 effects of discourse congruence. The topographic differences in the global congruence effects indicate differences in the underlying neural generators of the N400 effects, as a function of working memory. This suggests additional, or at a minimum, distinct, processing on the part of higher capacity individuals when tasked with integrating incoming words into the developing discourse representation.

  10. 40 CFR 63.2252 - What are the requirements for process units that have no control or work practice requirements?

    Science.gov (United States)

    2010-07-01

    ... requirements for process units that have no control or work practice requirements? For process units not... 40 Protection of Environment 12 2010-07-01 2010-07-01 true What are the requirements for process units that have no control or work practice requirements? 63.2252 Section 63.2252 Protection of...

  11. ENGLISH TRANSLATION OF JAVANESE CULTURAL PIECES IN RONGGENG DHUKUH PARUK NOVEL

    Directory of Open Access Journals (Sweden)

    Khristianto Khristianto

    2016-12-01

    Full Text Available Translating cultural pieces is always challenging since it usually involves a task of presenting something unknown to the target readers. This case is seen in the translation of Ronggeng Dhukuh Paruk novel which has been translated in many languages, one of them is English. It is full of Javanese cultural pieces but it was written in Bahasa Indonesia. Later, it was translated (or rewrite into Javanese—like coming back to its own language habitat. The objective of the paper is to identify the strategies applied to translate the cultural meaning. The data sources are the three-language versions of the novel, in Indonesia, Javanese and English. The analysis on the data revealed that there are many various cultural meanings in the text: ecological facts, social and cultural concept, the cultural products in things, religion, and linguistic features of the culture. The strategies used to translate the cultural meaning are descriptive (badhongan – leave garland, calque (bukak klambu, borrowing (dadap, seling, kathik, and borrowing with description (kamitua-respected leader. The procedure taken in translating cultural pieces considers some factor: the importance of the meaning for the narration, its foreign level, the importance of its exotics sense in the literary work, and the interest to present local nuances to the target readers.

  12. English Translation of Javanese Cultural Pieces in “Ronggeng Dhukuh Paruk” Novel

    Directory of Open Access Journals (Sweden)

    Khristianto Khristianto

    2016-12-01

    Full Text Available Translating cultural pieces is always challenging since it usually involves a task of presenting something unknown to the target readers. This case is seen in the translation of Ronggeng Dhukuh Paruk novel which has been translated in many languages, one of them is English. It is full of Javanese cultural pieces but it was written in Bahasa Indonesia. Later, it was translated (or rewrite into Javanese—like coming back to its own language habitat. The objective of the paper is to identify the strategies applied to translate the cultural meaning. The data sources are the three-language versions of the novel, in Indonesia, Javanese and English. The analysis on the data revealed that there are many various cultural meanings in the text: ecological facts, social and cultural concept, the cultural products in things, religion, and linguistic features of the culture. The strategies used to translate the cultural meaning are descriptive (badhongan – leave garland, calque (bukak klambu, borrowing (dadap, seling, kathik, and borrowing with description (kamitua-respected leader. The procedure taken in translating cultural pieces considers some factor: the importance of the meaning for the narration, its foreign level, the importance of its exotics sense in the literary work, and the interest to present local nuances to the target readers.

  13. Diagnosis of two textile pieces from Santarém Diocesan Museum: a multi-analytical approach

    Directory of Open Access Journals (Sweden)

    Rita Florentino Correia

    2016-01-01

    Full Text Available The present work aim was to study two composite textile pieces from Santarém Diocesan Museum, including their historic context, their conservation condition and the characterization of their constituent parts, which established the date of production. Both pieces belonged to the First Bishop of Daman (1840-1900 and were selected for their historic interest and originality, and for representing a case study in terms of materials, techniques and decoration. They are also a good example of the conservation problems that can occur in liturgical textiles. The diagnosis was extended using optical microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray fluorescence and Raman spectroscopy. These techniques allowed the identification of the fibres, binder, metals and pigments, confirming that the pieces date back to the late nineteenth century. Among the main forms of degradation, it was observed: structural deformations, dirt and material losses, not only in areas with fabric but also with metallic embroidery and painted layers.

  14. The direction of word stress processing in German: Evidence from a working memory paradigm

    Directory of Open Access Journals (Sweden)

    Frank eDomahs

    2014-06-01

    Full Text Available There are contradicting assumptions and findings on the direction of word stress processing in German. To resolve this question, we asked participants to read tri-syllabic nonwords and stress ambiguous words aloud. Additionally, they also performed a working memory task (2-back task. In nonword reading, participants’ individual working memory capacity was positively correlated with assignment of main stress to the antepenultimate syllable, which is most distant to the word’s right edge, while a (complementary negative correlation was observed with assignment of stress to the ultimate syllable. There was no significant correlation between working memory capacity and stress assignment to the penultimate syllable, which has been claimed to be the default stress pattern in German. In reading stress ambiguous words a similar but non-significant pattern was observed as in nonword reading. In sum, our results provide first psycholinguistic evidence supporting leftward stress processing in German. Our results do not lend support to the assumption of penultimate default stress in German. A specification of the lemma model is proposed which seems able to reconcile our findings and apparently contradicting assumptions and evidence.

  15. A THEORETICAL MODEL OF SOCIO-PSYCHOLOGICAL SUPPORT WORK PROCESSES FOR MANAGEMENT OF PRODUCTION TEAM

    Directory of Open Access Journals (Sweden)

    Tatyana Gennadevna Pronyushkina

    2015-10-01

    Full Text Available This article discusses the management of production team, in particular the developed theoretical model of socio-psychological support work processes for management of production team. The author of the research are formulated the purpose and objectives of social-psychological work on management of the production team. Developed in the study a theoretical model aimed at determining the conditions and the identification of features of effective management of the enterprise taking into account the socio-psychological characteristics of its staff. Tasks include: definition of the main characteristics of the production team and their severity, the analysis of these characteristics and identifying opportunities for their transformation, development of recommendations for management of social-psychological work on effects on the characteristics of the collective enterprise.Practical study of the activities of a number of businesses have shown the need to improve socio-psychological support of management processes production team: introducing a social and psychological planning team and develop the practice of sociological research on the state of the team, to ensure the smoothing of relations between workers and management through periodic meetings, creations of conditions for feedback, maintaining healthy competition among team members.

  16. Classification and coding of commercial fishing injuries by work processes: an experience in the Danish fresh market fishing industry

    DEFF Research Database (Denmark)

    Jensen, Olaf Chresten; Stage, Søren; Noer, Preben

    2005-01-01

    BACKGROUND: Work-related injuries in commercial fishing are of concern internationally. To better identify the causes of injury, this study coded occupational injuries by working processes in commercial fishing for fresh market fish. METHODS: A classification system of the work processes was deve......BACKGROUND: Work-related injuries in commercial fishing are of concern internationally. To better identify the causes of injury, this study coded occupational injuries by working processes in commercial fishing for fresh market fish. METHODS: A classification system of the work processes...... for 50% of the injuries; they were most serious type of injuries such as fractures and sprains. Walking about the ship, in particular embarking and disembarking, climbing and descending ladders accounted for nearly one-fifth of the injuries. CONCLUSION: We found that the working processes related...

  17. A theoretical model of co-worker responses to work reintegration processes.

    Science.gov (United States)

    Dunstan, Debra A; Maceachen, Ellen

    2014-06-01

    Emerging research has shown that co-workers have a significant influence on the return-to-work outcomes of partially fit ill or injured employees. By drawing on theoretical findings from the human resource and wider behavioral sciences literatures, our goal was to formulate a theoretical model of the influences on and outcomes of co-worker responses within work reintegration. From a search of 15 data bases covering the social sciences, business and medicine, we identified articles containing models of the factors that influence co-workers' responses to disability accommodations; and, the nature and impact of co-workers' behaviors on employee outcomes. To meet our goal, we combined identified models to form a comprehensive model of the relevant factors and relationships. Internal consistency and externally validity were assessed. The combined model illustrates four key findings: (1) co-workers' behaviors towards an accommodated employee are influenced by attributes of that employee, the illness or injury, the co-worker themselves, and the work environment; (2) the influences-behaviour relationship is mediated by perceptions of the fairness of the accommodation; (3) co-workers' behaviors affect all work reintegration outcomes; and (4) co-workers' behaviours can vary from support to antagonism and are moderated by type of support required, the social intensity of the job, and the level of antagonism. Theoretical models from the wider literature are useful for understanding the impact of co-workers on the work reintegration process. To achieve optimal outcomes, co-workers need to perceive the arrangements as fair. Perceptions of fairness might be supported by co-workers' collaborative engagement in the planning, monitoring and review of work reintegration activities.

  18. Family therapy process - works on the Polish version of SCORE-15 tool.

    Science.gov (United States)

    Józefik, Barbara; Matusiak, Feliks; Wolska, Małgorzata; Ulasińska, Romualda

    2016-01-01

    The aim of the paper is to demonstrate progress of the works on the Polish version of SCORE-15 and the results of the preliminary data analysis of changes in the process of family therapy, obtained with this tool. The works on the Polish version, ongoing since 2010, were inspired by the Research Committee European Family Therapy Association EFTA. Since the Polish version of SCORE-15 will be make public and published on EFTA website in the near future, therefore, it is important that people interested in the tool know the context of its development. The Polish version of SCORE-15, the tool designed to examine the process of family therapy, was used. The comparison of the results obtained by family members before the first family session and before the fourth one and psychotherapists' assessments show that the perception of the weight of the problem with which the family members came to therapy is indeed significantly lower already after three sessions of family therapy. Additionally, the obtained results show great coherence of the assessment of the family therapy progress in families and their therapists. The preliminary analysis of data obtained during the research project conducted in Outpatient Family Therapy Clinic, Department of Adult, Child and Adolescent Psychiatry, University Hospital in Krakow and in Laboratory of Psychology and Systemic Psychotherapy, Department of Child and Adolescent Psychiatry, Jagiellonian University Medical College between 2010 and 2014 revealed that SCORE-15 is a useful tool in research on changes in the systemic family therapy process.

  19. Nitriding Process Characterization of Cold Worked AISI 304 and 316 Austenitic Stainless Steels

    Directory of Open Access Journals (Sweden)

    Waldemar Alfredo Monteiro

    2017-01-01

    Full Text Available The nitriding behavior of austenitic stainless steels (AISI 304 and 316 was studied by different cold work degree (0% (after heat treated, 10%, 20%, 30%, and 40% before nitride processing. The microstructure, layer thickness, hardness, and chemical microcomposition were evaluated employing optical microscopy, Vickers hardness, and scanning electron microscopy techniques (WDS microanalysis. The initial cold work (previous plastic deformations in both AISI 304 and 306 austenitic stainless steels does not show special influence in all applied nitriding kinetics (in layer thicknesses. The nitriding processes have formed two layers, one external layer formed by expanded austenite with high nitrogen content, followed by another thinner layer just below formed by expanded austenite with a high presence of carbon (back diffusion. An enhanced diffusion can be observed on AISI 304 steel comparing with AISI 316 steel (a nitrided layer thicker can be noticed in the AISI 304 steel. The mechanical strength of both steels after nitriding processes reveals significant hardness values, almost 1100 HV, on the nitrided layers.

  20. Influence of shift work on cognitive performance in male business process outsourcing employees.

    Science.gov (United States)

    Shwetha, Bijavara; Sudhakar, Honnamachanahalli

    2012-09-01

    India is a front runner in IT industry. Business process outsourcing (BPO) sector is a major part of IT industry with around 4.5 million employees. These employees are subjected to high work stress, odd working hours, and frequent shift changes leading to increased physical and mental health problems. To study the cognitive functions in male BPO employees exposed to regular shifts. Young BPO employees from various BPO companies of Bangalore were tested for cognitive functions. Fifty male BPO employees exposed to regular shifts were assessed for various cognitive functions including tests for speed, attention, learning and memory, and executive function. They were compared with 50 non-BPO employees not working in shifts. Statistical analysis - Data was analysed by t-test and Mann-Whitney test using SPSS V.13.0. BPO employees performed poorly compared to their controls in tests for mental speed, learning and memory, and response inhibition. No changes were seen between groups in tests for attention and working memory. Cognitive functions are impaired in BPO employees exposed to regular shift changes.

  1. Does caffeine modulate verbal working memory processes? An fMRI study.

    Science.gov (United States)

    Koppelstaetter, F; Poeppel, T D; Siedentopf, C M; Ischebeck, A; Verius, M; Haala, I; Mottaghy, F M; Rhomberg, P; Golaszewski, S; Gotwald, T; Lorenz, I H; Kolbitsch, C; Felber, S; Krause, B J

    2008-01-01

    To assess the effect of caffeine on the functional MRI signal during a 2-back verbal working memory task, we examined blood oxygenation level-dependent regional brain activity in 15 healthy right-handed males. The subjects, all moderate caffeine consumers, underwent two scanning sessions on a 1.5-T MR-Scanner separated by a 24- to 48-h interval. Each participant received either placebo or 100 mg caffeine 20 min prior to the performance of the working memory task in blinded crossover fashion. The study was implemented as a blocked-design. Analysis was performed using SPM2. In both conditions, the characteristic working memory network of frontoparietal cortical activation including the precuneus and the anterior cingulate could be shown. In comparison to placebo, caffeine caused an increased response in the bilateral medial frontopolar cortex (BA 10), extending to the right anterior cingulate cortex (BA 32). These results suggest that caffeine modulates neuronal activity as evidenced by fMRI signal changes in a network of brain areas associated with executive and attentional functions during working memory processes.

  2. Work in process level definition: a method based on computer simulation and electre tri

    Directory of Open Access Journals (Sweden)

    Isaac Pergher

    2014-09-01

    Full Text Available This paper proposes a method for defining the levels of work in progress (WIP in productive environments managed by constant work in process (CONWIP policies. The proposed method combines the approaches of Computer Simulation and Electre TRI to support estimation of the adequate level of WIP and is presented in eighteen steps. The paper also presents an application example, performed on a metalworking company. The research method is based on Computer Simulation, supported by quantitative data analysis. The main contribution of the paper is its provision of a structured way to define inventories according to demand. With this method, the authors hope to contribute to the establishment of better capacity plans in production environments.

  3. Optimal protocol for maximum work extraction in a feedback process with a time-varying potential

    Science.gov (United States)

    Kwon, Chulan

    2017-12-01

    The nonequilibrium nature of information thermodynamics is characterized by the inequality or non-negativity of the total entropy change of the system, memory, and reservoir. Mutual information change plays a crucial role in the inequality, in particular if work is extracted and the paradox of Maxwell's demon is raised. We consider the Brownian information engine where the protocol set of the harmonic potential is initially chosen by the measurement and varies in time. We confirm the inequality of the total entropy change by calculating, in detail, the entropic terms including the mutual information change. We rigorously find the optimal values of the time-dependent protocol for maximum extraction of work both for the finite-time and the quasi-static process.

  4. Postgraduate education and research in Brazil: regulation and reconfiguration processes of academic work formation and production

    Directory of Open Access Journals (Sweden)

    João Ferreira de Oliveira

    2015-07-01

    Full Text Available This text analyses some of the processes of formation and production regulation and reconfiguration of the scholarly work in Brazil. Initially we examine the context and meaning of knowledge production in times of flexible accumulation, as well as the current landscape of Postgraduate education in the country. We seek to understand how public policies in the area, particularly the actions of evaluation and promotion, and the new modus operandi of the Postgraduate study and research organization have been reconfiguring the work production of teaching and students within the programs, especially in education. Above all, we seek to highlight the role of promotion and evaluation agencies, increasingly committed to a vision of expansion that drives the production of knowledge associated with demands of economic-productivity, rather than a consistent formative project that would result in a significant advancement in the production and dissemination of knowledge in the different areas.

  5. Training Students’ Science Process Skills through Didactic Design on Work and Energy

    Science.gov (United States)

    Ramayanti, S.; Utari, S.; Saepuzaman, D.

    2017-09-01

    Science Process Skills (SPS) has not been optimally trained to the students in the learning activity. The aim of this research is finding the ways to train SPS on the subject of Work and Energy. One shot case study design is utilized in this research that conducted on 32 students in one of the High Schools in Bandung. The students’ SPS responses were analyzed by the development SPS based assessment portfolios. The results of this research showed the didactic design that had been designed to training the identifying variables skills, formulating hypotheses, and the experiment activity shows the development. But the didactic design to improve the students’ predicting skills shows that the development is still not optimal. Therefore, in the future studies need to be developed the didactic design on the subject Work and Energy that exercising these skills.

  6. Hydrogeomorphic processes and torrent control works on a large alluvial fan in the eastern Italian Alps

    Science.gov (United States)

    Marchi, L.; Cavalli, M.; D'Agostino, V.

    2010-03-01

    Alluvial fans are often present at the outlet of small drainage basins in alpine valleys; their formation is due to sediment transport associated with flash floods and debris flows. Alluvial fans are preferred sites for human settlements and are frequently crossed by transport routes. In order to reduce the risk for economic activities located on or near the fan and prevent loss of lives due to floods and debris flows, torrent control works have been extensively carried out on many alpine alluvial fans. Hazard management on alluvial fans in alpine regions is dependent upon reliable procedures to evaluate variations in the frequency and severity of hydrogeomorphic processes and the long-term performance of the torrent training works. An integrated approach to the analysis of hydrogeomorphic processes and their interactions with torrent control works has been applied to a large alluvial fan in the southern Carnic Alps (northeastern Italy). Study methods encompass field observations, interpretation of aerial photographs, analysis of historical documents, and numerical modelling of debris flows. The overall performance of control works implemented in the early decades of 20th century was satisfactory, and a reduction of hazardous events was recognised from features observed in the field and in aerial photographs, as well as from the analysis of historical records. The 2-D simulation of debris flows confirms these findings, indicating that debris flow deposition would not affect urban areas or main roads, even in the case of a high-magnitude event. Present issues in the management of the studied alluvial fan are representative of situations frequently found in the European Alps and deal with the need for maintenance of the control structures and the pressures for land use changes aimed at the economic exploitation of the fan surface.

  7. Hydrogeomorphic processes and torrent control works on a large alluvial fan in the eastern Italian Alps

    Directory of Open Access Journals (Sweden)

    L. Marchi

    2010-03-01

    Full Text Available Alluvial fans are often present at the outlet of small drainage basins in alpine valleys; their formation is due to sediment transport associated with flash floods and debris flows. Alluvial fans are preferred sites for human settlements and are frequently crossed by transport routes. In order to reduce the risk for economic activities located on or near the fan and prevent loss of lives due to floods and debris flows, torrent control works have been extensively carried out on many alpine alluvial fans. Hazard management on alluvial fans in alpine regions is dependent upon reliable procedures to evaluate variations in the frequency and severity of hydrogeomorphic processes and the long-term performance of the torrent training works. An integrated approach to the analysis of hydrogeomorphic processes and their interactions with torrent control works has been applied to a large alluvial fan in the southern Carnic Alps (northeastern Italy. Study methods encompass field observations, interpretation of aerial photographs, analysis of historical documents, and numerical modelling of debris flows. The overall performance of control works implemented in the early decades of 20th century was satisfactory, and a reduction of hazardous events was recognised from features observed in the field and in aerial photographs, as well as from the analysis of historical records. The 2-D simulation of debris flows confirms these findings, indicating that debris flow deposition would not affect urban areas or main roads, even in the case of a high-magnitude event. Present issues in the management of the studied alluvial fan are representative of situations frequently found in the European Alps and deal with the need for maintenance of the control structures and the pressures for land use changes aimed at the economic exploitation of the fan surface.

  8. FEA and microstructure characterization of a one-piece Y-TZP abutment.

    Science.gov (United States)

    da Silva, Lucas Hian; Ribeiro, Sebastião; Borges, Alexandre Luís Souto; Cesar, Paulo Francisco; Tango, Rubens Nisie

    2014-11-01

    The most important drawback of dental implant/abutment assemblies is the need for a fixing screw. This study aimed to develop an esthetic one-piece Y-TZP abutment to suppress the use of the screw. Material characterization was performed using a bar-shaped specimen obtained by slip-casting to validate the method prior to prototype abutment fabrication by the same process. The mechanical behavior of the prototype abutment was verified and compared with a conventional abutment by finite element analysis (FEA). The abutment was evaluated by micro-CT analysis and its density was measured. FEA showed stress concentration at the first thread pitch during installation and in the cervical region during oblique loading for both abutments. However, stress concentration was observed at the base of the screw head and stem in the conventional abutment. The relative density for the fabricated abutment was 95.68%. Micro-CT analysis revealed the presence of elongated cracks with sharp edges over the surface and porosity in the central region. In the light of these findings, the behavior of a one-piece abutment is expected to be better than that of the conventional model. New studies should be conducted to clarify the performance and longevity of this one-piece Y-TZP abutment. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  9. Accessing the mental space - Spatial working memory processes for language and vision overlap in precuneus

    DEFF Research Database (Denmark)

    Wallentin, Mikkel; Weed, Ethan; Østergaard, Leif

    2008-01-01

    Abstract: The ‘‘overlapping systems'' theory of language function argues that linguistic meaning construction crucially relies on contextual information provided by ‘‘nonlinguistic'' cognitive systems, such as perception and memory. This study examines whether linguistic processing of spatial......, strikingly overlapping a network previously shown to be involved in recall of spatial aspects of images depicting similar scenarios. This supports a neurocognitive model of language function, where sentences establish meaning by interacting with the perceptual and working memory networks of the brain....

  10. Effectiveness, sustainability and quality. Criticality of the building process in public works in Italy

    Directory of Open Access Journals (Sweden)

    Rossella Maspoli

    2013-10-01

    Full Text Available In the Italian case are outlined, compared to other European countries, in the 2000s, the limits of the policies for the architectural quality and, in parallel, the deficiencies of the technical regulations for public works contracts. Object of analysis and research are intervention strategies to improve the overall quality of the public sector, which concerns the procedures for project technical verification and validation, the development of tools for the implementation of the quality plan, the prospects for process innovation coherent the Regulation of the Public Contracts Code.

  11. An ergonomic analysis of work in the process of professional rehabilitation in Brazil.

    Science.gov (United States)

    Cabral, A; Souza e Silva, M; Louzada, E; Cesar, W

    2012-01-01

    The purpose of this study is to describe the use of the Ergonomic Analysis of Work (EAW) in the process of rehabilitating workers, insured by the National Institute of Social Security (INSS) in Brazil, and to conduct a brief analysis of the instrument used by this body. Information obtained from EAW enabled the demand, the requirements of the activity and the skills needed to perform the tasks in the workplace to be determined, thus aiding the decision of the INSS as to rehabilitating the workers and their return to their jobs.

  12. Impaired Processing of Serial Order Determines Working Memory Impairments in Alzheimer's Disease.

    Science.gov (United States)

    De Belder, Maya; Santens, Patrick; Sieben, Anne; Fias, Wim

    2017-01-01

    Working memory (WM) problems are commonly observed in Alzheimer's disease (AD), but the affected mechanisms leading to impaired WM are still insufficiently understood. The ability to efficiently process serial order in WM has been demonstrated to be fundamental to fluent daily life functioning. The decreased capability to mentally process serial position in WM has been put forward as the underlying explanation for generally compromised WM performance. Determine which mechanisms, such as order processing, are responsible for deficient WM functioning in AD. A group of AD patients (n = 32) and their partners (n = 25), assigned to the control group, were submitted to an extensive battery of neuropsychological and experimental tasks, assessing general cognitive state and functioning of several aspects related to serial order WM. The results revealed an impaired ability to bind item information to serial position within WM in AD patients compared to controls. It was additionally observed that AD patients experienced specific difficulties with directing spatial attention when searching for item information stored in WM. The processing of serial order and the allocation of attentional resources are both disrupted, explaining the generally reduced WM functioning in AD patients. Further studies should now clarify whether this observation could explain disease-related problems for other cognitive functions such as verbal expression, auditory comprehension, or planning.

  13. Streamlining the process: A strategy for making NEPA work better and cost less

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, R.P.; Hansen, J.D. [Hansen Environmental Consultants, Englewood, CO (United States); Wolff, T.A. [Sandia National Labs., Albuquerque, NM (United States)

    1998-05-01

    When the National Environmental Policy Act (NEPA) was enacted in 1969, neither Congress nor the Federal Agencies affected anticipated that implementation of the NEPA process would result in the intolerable delays, inefficiencies, duplication of effort, commitments of excessive financial and personnel resources, and bureaucratic gridlock that have become institutionalized. The 1975 Council on Environmental Quality (CEQ) regulations, which were intended to make the NEPA process more efficient and more useful to decision makers and the public, have either been largely ignored or unintentionally subverted. Agency policy mandates, like those of former Secretary of Energy Hazel R. O`Leary, to ``make NEPA work better and cost less`` have, so far, been disappointingly ineffectual. Federal Agencies have reached the point where almost every constituent of the NEPA process must be subjected to crisis management. This paper focuses on a ten-point strategy for streamlining the NEPA process in order to achieve the Act`s objectives while easing the considerable burden on agencies, the public, and the judicial system. How the ten points are timed and implemented is critical to any successful streamlining.

  14. Characteristics of school facilities and their impact on educational process and students' work

    Directory of Open Access Journals (Sweden)

    Petrović Ivana P.

    2014-01-01

    Full Text Available Much research suggests that educational process, learning and students' performance depend on a number of factors such as personal and professional characteristics of teachers, curricula, and the quality of teaching and extra-curricular activities. In addition, the quality of educational process is closely connected to material-technical conditions of the school and the quality of teaching equipment. This mostly concerns school facilities (school buildings, classrooms, cabinets, library, other facilities, courtyard and gymnasium, equipment, furniture and teaching aids. However, quality learning and work also require favourable physical, physiological, social and psychological conditions for study. This is the reason why this paper investigates students' opinions concerning the influence of certain characteristics of school facilities (wall colours, visual aids hanging on walls, teaching aids, furniture, and other physical aspects, including the size of student's groups on the quality of study and learning, as well as whether these opinions vary according to sex, age and year of study. The data was collected by a questionnaire comprising 25 items especially designed for the needs of this investigation. There were 116 respondents, students of the Preschool Teacher Training College in Kruševac. The findings show that certain features of the space and certain physical characteristics do have impact on students' work and performance, and therefore on the quality of teaching. They also demonstrate that students' estimates and opinions vary according to age and year of study.

  15. Spectral EEG abnormalities during vibrotactile encoding and quantitative working memory processing in schizophrenia

    Directory of Open Access Journals (Sweden)

    Simon Ludwig

    2016-01-01

    Full Text Available Schizophrenia is associated with a number of cognitive impairments such as deficient sensory encoding or working memory processing. However, it is largely unclear how dysfunctions on these various levels of cortical processing contribute to alterations of stimulus-specific information representation. To test this, we used a well-established sequential frequency comparison paradigm, in which sensory encoding of vibrotactile stimuli can be assessed via frequency-specific steady-state evoked potentials (SSEPs over primary somatosensory cortex (S1. Further, we investigated the maintenance of frequency information in working memory (WM in terms of parametric power modulations of induced beta-band EEG oscillations. In the present study schizophrenic patients showed significantly less pronounced SSEPs during vibrotactile stimulation than healthy controls. In particular, inter-trial phase coherence was reduced. While maintaining vibrotactile frequencies in WM, patients showed a significantly weaker prefrontal beta-power modulation compared to healthy controls. Crucially, patients exhibited no general disturbances in attention, as inferred from a behavioral test and from alpha-band event-related synchronization. Together, our results provide novel evidence that patients with schizophrenia show altered neural correlates of stimulus-specific sensory encoding and WM maintenance, suggesting an early somatosensory impairment as well as alterations in the formation of abstract representations of task-relevant stimulus information.

  16. Similarities and Differences between Working Memory and Long-Term Memory: Evidence from the Levels-of-Processing Span Task

    Science.gov (United States)

    Rose, Nathan S.; Myerson, Joel; Roediger, Henry L., III; Hale, Sandra

    2010-01-01

    Two experiments compared the effects of depth of processing on working memory (WM) and long-term memory (LTM) using a levels-of-processing (LOP) span task, a newly developed WM span procedure that involves processing to-be-remembered words based on their visual, phonological, or semantic characteristics. Depth of processing had minimal effect on…

  17. Investigating the Relationship between Sensory Processing and Job Satisfaction in Occupational Therapists Working in Shiraz Cit

    Directory of Open Access Journals (Sweden)

    Sahar Ghanbari

    2015-09-01

    Full Text Available Background: job satisfaction is referred to a set of individual’s positive and negative attitudes toward his/her job. Personality traits of individuals are among the factors contributing to job satisfaction. According to Dunn model, people receive information based on their self-regulatory strategies and sensory thresholds. Then behave accordingly and in response to the environment. This paper examines the relationship between sensory processing and job satisfaction especially in occupational therapist employing in Shiraz (2014. Methods: This study is descriptive-analytic. The sample consisted of all 33 occupational therapists working in Shiraz City who work in private and public sectors, part-time and full-time of both genders. After obtaining written consent, the demographic characteristics questionnaire, adult sensory profile and Minnesota Job Satisfaction Test were obtained. The results were analyzed by SPSS 21 software as well as Spearman’s and Pearson chi square tests. Results: No statistical correlation was found between job satisfaction and all four quadrants including the first quadrant (P=0.441 and second (P=0.943 and third (P=0.650 and fourth (P=0.338. In addition, statistically, there was no relationship between job satisfaction and various variables such as participants’ ages (P=0.51, gender (P=0.401, marital status (P=0.114, educational level (P=0.073, job experience (P=0.403, average of daily work hours (P=0.617 and at end the type of contract (P=0.079. Conclusion: The sensory processing cannot directly determine people’s satisfaction with their jobs. Job satisfaction is a complex issue that is influenced by different internal and external factors, and cannot be considered as an element for determining job satisfaction of therapists.

  18. Scleral fixation of one piece intraocular lens by injector implantation

    Directory of Open Access Journals (Sweden)

    Ertugrul Can

    2014-01-01

    Full Text Available Aim of Study: With an ab-interno technique of transscleral suturing of current one-piece posterior chamber intraocular lenses (PC IOLs by injector implantation in the absence of capsular support, we aimed to demonstrate the possibility of the implantation of one-piece acrylic PC IOLs that might be produced in the future for only scleral fixation through small clear corneal incision. Materials and Methods: Case report and literature review. Results: This procedure has been performed in eight aphakic eyes with four different types of IOLs. Good centration was achieved with minimal technical effort. All patients had well-centered and stable lenses postoperatively during 9-18 months follow-up. Conclusion: We managed to decrease the risks of surgical trauma and intricate surgical maneuvers requirement. With this technique, excessive fluid leakage and consecutive hypotony can be minimized.

  19. The effects of age on processing and storage in working memory span tasks and reading comprehension.

    Science.gov (United States)

    Schroeder, Paul J

    2014-01-01

    BACKGROUND/STUDY CONTEXT: Declines in verbal working memory span task performance have been associated with deficits in the language processing abilities of healthy older adults, but it is unclear how storage and processing contribute to this relationship. Moreover, recent studies of the psychometric properties of span measures in the general cognitive literature highlight the need for a critical reassessment of age-related differences in working memory task performance. Forty-two young (Mage = 19.45 years) and 42 older participants (Mage = 73.00 years) completed a series of neuropsychological screening measures, four memory span tasks (one-syllable word span, three-syllable word span, reading span, and sentence span), and a measure of reading comprehension. Each span measure was completed under self-paced and timed encoding conditions. A 2 (age) × 2 (task type) × 2 (encoding conditions) mixed-model design was used. (1) Age effects were reliable for both simple and complex span task performance; (2) limiting the available encoding time yielded lower recall scores across tasks and exacerbated age differences in simple span performance; and (3) both encoding condition and age affected the relationship between each of the span measures and the relationship between span and reading comprehension. Declines in both storage and processing abilities contributed to age differences in span task performance and the relationship between span and reading comprehension. Although older people appear to benefit from task administration protocols that promote successful memory encoding, researchers should be aware of the potential risks to validity posed by such accommodations.

  20. I. WORKING MEMORY CAPACITY IN CONTEXT: MODELING DYNAMIC PROCESSES OF BEHAVIOR, MEMORY, AND DEVELOPMENT.

    Science.gov (United States)

    Simmering, Vanessa R

    2016-09-01

    Working memory is a vital cognitive skill that underlies a broad range of behaviors. Higher cognitive functions are reliably predicted by working memory measures from two domains: children's performance on complex span tasks, and infants' performance in looking paradigms. Despite the similar predictive power across these research areas, theories of working memory development have not connected these different task types and developmental periods. The current project takes a first step toward bridging this gap by presenting a process-oriented theory, focusing on two tasks designed to assess visual working memory capacity in infants (the change-preference task) versus children and adults (the change detection task). Previous studies have shown inconsistent results, with capacity estimates increasing from one to four items during infancy, but only two to three items during early childhood. A probable source of this discrepancy is the different task structures used with each age group, but prior theories were not sufficiently specific to explain how performance relates across tasks. The current theory focuses on cognitive dynamics, that is, how memory representations are formed, maintained, and used within specific task contexts over development. This theory was formalized in a computational model to generate three predictions: 1) capacity estimates in the change-preference task should continue to increase beyond infancy; 2) capacity estimates should be higher in the change-preference versus change detection task when tested within individuals; and 3) performance should correlate across tasks because both rely on the same underlying memory system. I also tested a fourth prediction, that development across tasks could be explained through increasing real-time stability, realized computationally as strengthening connectivity within the model. Results confirmed these predictions, supporting the cognitive dynamics account of performance and developmental changes in real

  1. Determination of processing maps for the warm working of vanadium microalloyed eutectoid steels

    Energy Technology Data Exchange (ETDEWEB)

    Rastegari, H., E-mail: rastegary@birjandut.ac.ir [Department of Engineering, Birjand University of Technology, South Khorasan 97198-66981 (Iran, Islamic Republic of); Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Kermanpur, A. [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Najafizadeh, A. [Fould Institute of Technology, Fouldshahar, Isfahan 8491663763 (Iran, Islamic Republic of); Somani, M.C.; Porter, D.A. [Centre for Advanced Steels Research, University of Oulu, P.O. Box 4200, 90014 Oulu (Finland); Ghassemali, E.; Jarfors, A.E.W. [Jönköping University, School of Engineering, Department of Materials and Manufacturing, P.O. Box 1026, SE-551 11 Jönköping (Sweden)

    2016-03-21

    Microalloying of an eutectoid steel with V may facilitate formation of dispersed nano-scaled VC particles in the microstructure during thermomechanical processing or subsequent heat treatment. In this research, the constitutive flow behavior of vanadium microalloyed eutectoid steel has been investigated in the temperature range 620–770 °C at strain rates in the range 0.01–10 s{sup −1}. Microstructural characterization of the deformed specimens was conducted using SEM and EBSD techniques. In this context, various deformation mechanisms occurring during warm deformation have been characterized and delineated through construction of a processing map by establishing a power dissipation map and an instability map for the steel and superimposing them. The results show that the pearlitic microstructure exhibits several deformation mechanisms within these warm working conditions. Dynamic spheroidization of cementite lamella takes place in the range 660–720 °C and 0.01–0.1 s{sup −1} with a power dissipation efficiency of 27–33%, characterizing a safe window of processing this steel. The presence of vanadium carbides at grain boundaries strengthened the pearlitic microstructure and retarded the occurrence of some deformation defects during low temperature, high speed deformation in the range 620–720 °C and 1–10 s{sup −1}.

  2. The processes of vaporization in the porous structures working with the excess of liquid

    Directory of Open Access Journals (Sweden)

    Genbach Alexander A.

    2017-01-01

    Full Text Available The processes of vaporization in porous structures, working with the excess of liquid are investigated. With regard to the thermal power plants new porous cooling system is proposed and investigated, in which the supply of coolant is conducted by the combined action of gravity and capillary forces. The cooling surface is made of stainless steel, brass, copper, bronze, nickel, alundum and glass, with wall thickness of (0.05-2•10-3 m. Visualizations of the processes of vaporization were carried out using holographic interferometry with the laser system and high speed camera. The operating conditions of the experiments were: water pressures (0.01-10 MPa, the temperature difference of sub-cooling (0-20°C, an excess of liquid (1-14 of the steam flow, the heat load (1-60•104 W/m2, the temperature difference (1-60°C and orientation of the system (± 0 - ± 90 degrees. Studies have revealed three areas of liquid vaporization process (transitional, developed and crisis. The impact of operating and design parameters on the integrated and thermal hydraulic characteristics was defined. The optimum (minimum flow rate of cooling fluid and the most effective type of mesh porous structure were also defined.

  3. A functional MRI study of the influence of practice on component processes of working memory.

    Science.gov (United States)

    Landau, Susan M; Schumacher, Eric H; Garavan, Hugh; Druzgal, T Jason; D'Esposito, Mark

    2004-05-01

    Previous neuroimaging studies have shown that neural activity changes with task practice. The types of changes reported have been inconsistent, however, and the neural mechanisms involved remain unclear. In this study, we investigated the influence of practice on different component processes of working memory (WM) using a face WM task. Event-related functional magnetic resonance imaging (fMRI) methodology allowed us to examine signal changes from early to late in the scanning session within different task stages (i.e., encoding, delay, retrieval), as well as to determine the influence of different levels of WM load on neural activity. We found practice-related decreases in fMRI signal and effects of memory load occurring primarily during encoding. This suggests that practice improves encoding efficiency, especially at higher memory loads. The decreases in fMRI signal we observed were not accompanied by improved behavioral performance; in fact, error rate increased for high WM load trials, indicating that practice-related changes in activation may occur during a scanning session without behavioral evidence of learning. Our results suggest that practice influences particular component processes of WM differently, and that the efficiency of these processes may not be captured by performance measures alone.

  4. Age-related Decline in Case-Marker Processing and its Relation to Working Memory Capacity.

    Science.gov (United States)

    Sung, Jee Eun

    2017-09-01

    Purposes of the current study were to investigate whether age-related decline emerged in a case-marker assignment task (CMAT) and to explore the relationship between working-memory (WM) capacity and case-marker processing. A total of 121 individuals participated in the study with 62 younger adults and 59 elderly adults. All were administered a CMAT that consisted of active and passive constructions with canonical and noncanonical word-order conditions. A composite measure of WM tasks served as an index of participants' WM capacity. The older group performed worse than the younger group, and the noncanonical word order elicited worse performance than the canonical condition. The older group demonstrated greater difficulty in case-marker processing under the canonical condition and passive construction. Regression results revealed that age, education, and sentence type were the best predictors to account for performance on the CMAT. The canonicity of word order and passive construction were critical factors related to decline in abilities in a case-marker assignment. The combination of age, education, and sentence type factors accounted for overall performance on case-marker processing. Results indicated the crucial necessity to find a cognitively and linguistically demanding condition that elicits aging effects most efficiently, considering language-specific syntactic features.

  5. A working environment for digital planetary data processing and mapping using ISIS and GRASS GIS

    Science.gov (United States)

    Frigeri, Alessandro; Hare, Trent; Neteler, Markus; Coradini, Angioletta; Federico, Costanzo; Orosei, Roberto

    2011-09-01

    Since the beginning of planetary exploration, mapping has been fundamental to summarize observations returned by scientific missions. Sensor-based mapping has been used to highlight specific features from the planetary surfaces by means of processing. Interpretative mapping makes use of instrumental observations to produce thematic maps that summarize observations of actual data into a specific theme. Geologic maps, for example, are thematic interpretative maps that focus on the representation of materials and processes and their relative timing. The advancements in technology of the last 30 years have allowed us to develop specialized systems where the mapping process can be made entirely in the digital domain. The spread of networked computers on a global scale allowed the rapid propagation of software and digital data such that every researcher can now access digital mapping facilities on his desktop. The efforts to maintain planetary missions data accessible to the scientific community have led to the creation of standardized digital archives that facilitate the access to different datasets by software capable of processing these data from the raw level to the map projected one. Geographic Information Systems (GIS) have been developed to optimize the storage, the analysis, and the retrieval of spatially referenced Earth based environmental geodata; since the last decade these computer programs have become popular among the planetary science community, and recent mission data start to be distributed in formats compatible with these systems. Among all the systems developed for the analysis of planetary and spatially referenced data, we have created a working environment combining two software suites that have similar characteristics in their modular design, their development history, their policy of distribution and their support system. The first, the Integrated Software for Imagers and Spectrometers (ISIS) developed by the United States Geological Survey

  6. A working environment for digital planetary data processing and mapping using ISIS and GRASS GIS

    Science.gov (United States)

    Frigeri, A.; Hare, T.; Neteler, M.; Coradini, A.; Federico, C.; Orosei, R.

    2011-01-01

    Since the beginning of planetary exploration, mapping has been fundamental to summarize observations returned by scientific missions. Sensor-based mapping has been used to highlight specific features from the planetary surfaces by means of processing. Interpretative mapping makes use of instrumental observations to produce thematic maps that summarize observations of actual data into a specific theme. Geologic maps, for example, are thematic interpretative maps that focus on the representation of materials and processes and their relative timing. The advancements in technology of the last 30 years have allowed us to develop specialized systems where the mapping process can be made entirely in the digital domain. The spread of networked computers on a global scale allowed the rapid propagation of software and digital data such that every researcher can now access digital mapping facilities on his desktop. The efforts to maintain planetary missions data accessible to the scientific community have led to the creation of standardized digital archives that facilitate the access to different datasets by software capable of processing these data from the raw level to the map projected one. Geographic Information Systems (GIS) have been developed to optimize the storage, the analysis, and the retrieval of spatially referenced Earth based environmental geodata; since the last decade these computer programs have become popular among the planetary science community, and recent mission data start to be distributed in formats compatible with these systems. Among all the systems developed for the analysis of planetary and spatially referenced data, we have created a working environment combining two software suites that have similar characteristics in their modular design, their development history, their policy of distribution and their support system. The first, the Integrated Software for Imagers and Spectrometers (ISIS) developed by the United States Geological Survey

  7. Method and apparatus for optimizing the efficiency and quality of laser material processing

    Science.gov (United States)

    Susemihl, I.

    1990-03-13

    The efficiency of laser welding and other laser material processing is optimized according to this invention by rotating the plane of polarization of a linearly polarized laser beam in relation to a work piece of the material being processed simultaneously and in synchronization with steering the laser beam over the work piece so as to keep the plane of polarization parallel to either the plane of incidence or the direction of travel of the beam in relation to the work piece. Also, depending to some extent on the particular processing being accomplished, such as welding or fusing, the angle of incidence of the laser beam on the work piece is kept at or near the polarizing or Brewster's angle. The combination of maintaining the plane of polarization parallel to plane of incidence while also maintaining the angle of incidence at or near the polarizing or Brewster's angle results in only minimal, if any, reflection losses during laser welding. Also, coordinating rotation of the plane of polarization with the translation or steering of a work piece under a laser cutting beam maximizes efficiency and kerf geometry, regardless of the direction of cut. 7 figs.

  8. Impact of load-related neural processes on feature binding in visuospatial working memory.

    Directory of Open Access Journals (Sweden)

    Nicole A Kochan

    Full Text Available BACKGROUND: The capacity of visual working memory (WM is substantially limited and only a fraction of what we see is maintained as a temporary trace. The process of binding visual features has been proposed as an adaptive means of minimising information demands on WM. However the neural mechanisms underlying this process, and its modulation by task and load effects, are not well understood. OBJECTIVE: To investigate the neural correlates of feature binding and its modulation by WM load during the sequential phases of encoding, maintenance and retrieval. METHODS AND FINDINGS: 18 young healthy participants performed a visuospatial WM task with independent factors of load and feature conjunction (object identity and position in an event-related functional MRI study. During stimulus encoding, load-invariant conjunction-related activity was observed in left prefrontal cortex and left hippocampus. During maintenance, greater activity for task demands of feature conjunction versus single features, and for increased load was observed in left-sided regions of the superior occipital cortex, precuneus and superior frontal cortex. Where these effects were expressed in overlapping cortical regions, their combined effect was additive. During retrieval, however, an interaction of load and feature conjunction was observed. This modulation of feature conjunction activity under increased load was expressed through greater deactivation in medial structures identified as part of the default mode network. CONCLUSIONS AND SIGNIFICANCE: The relationship between memory load and feature binding qualitatively differed through each phase of the WM task. Of particular interest was the interaction of these factors observed within regions of the default mode network during retrieval which we interpret as suggesting that at low loads, binding processes may be 'automatic' but at higher loads it becomes a resource-intensive process leading to disengagement of activity in this

  9. Making working memory work: the effects of extended practice on focus capacity and the processes of updating, forward access, and random access.

    Science.gov (United States)

    Price, John M; Colflesh, Gregory J H; Cerella, John; Verhaeghen, Paul

    2014-05-01

    We investigated the effects of 10h of practice on variations of the N-Back task to investigate the processes underlying possible expansion of the focus of attention within working memory. Using subtractive logic, we showed that random access (i.e., Sternberg-like search) yielded a modest effect (a 50% increase in speed) whereas the processes of forward access (i.e., retrieval in order, as in a standard N-Back task) and updating (i.e., changing the contents of working memory) were executed about 5 times faster after extended practice. We additionally found that extended practice increased working memory capacity as measured by the size of the focus of attention for the forward-access task, but not for variations where probing was in random order. This suggests that working memory capacity may depend on the type of search process engaged, and that certain working-memory-related cognitive processes are more amenable to practice than others. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Work process and management competences of the nurses in the family health strategy

    Directory of Open Access Journals (Sweden)

    Marcilene de Paula

    2013-11-01

    Full Text Available The objective was to identify the dimension of the process of nursing work in a unit of the Family Health Strategy and correlate the necessary competences for the development of managerial activities. It is a descriptive study using the technique of non-participant observation during 160 hours of activities of four nurses from a unit of the Family Health Strategy, from March to May, 2011. The results showed that the care dimension holds 42% of the time spent by nurses in their activities, followed by management (33%, education (20% and political participation (2.5%. In managerial dimension, managerial competences were classified as follows: communication (55%, leadership (33%, permanent education (8% and decision making (4%. These competences are interrelated and developed together with administrative functions: planning, coordination, direction and control. For the development of their attributions in the Family Health Strategies the nurse professionals uses administrative tools demanding constant mobilization of different competences.

  11. Assessing the validity of computer-game-like tests of processing speed and working memory.

    Science.gov (United States)

    McPherson, Jason; Burns, Nicholas R

    2008-11-01

    Processing speed (Gs) and working memory (WM) tasks have received considerable interest as correlates of more complex cognitive performance measures. Gs and WM tasks are often repetitive and are often rigidly presented, however. The effects of Gs and WM may, therefore, be confounded with those of motivation and anxiety. In an effort to address this problem, we assessed the concurrent and predictive validity of computer-game-like tests of Gs (Space Code) and WM (Space Matrix) across two experiments. In Experiment 1, within a university sample (N = 70), Space Matrix exhibited concurrent validity as a WM measure, whereas Space Code appeared to be a mixed-ability measure. In Experiment 2, Space Matrix exhibited concurrent validity as well as predictive validity (as a predictor of school grades) within a school-aged sample (N = 94), but the results for Space Code were less encouraging. Relationships between computer-game-like tests and gender, handedness, and computer-game experience are also discussed.

  12. Making working memory work: The effects of extended practice on focus capacity and the processes of updating, forward access, and random access

    OpenAIRE

    Price, John M.; Colflesh, Gregory J. H.; Cerella, John; Verhaeghen, Paul

    2014-01-01

    We investigated the effects of 10 hours of practice on variations of the N-Back task to investigate the processes underlying possible expansion of the focus of attention within working memory. Using subtractive logic, we showed that random access (i.e., Sternberg-like search) yielded a modest effect (a 50% increase in speed) whereas the processes of forward access (i.e., retrieval in order, as in a standard N-Back task) and updating (i.e., changing the contents of working memory) were execute...

  13. Emotion Processing Influences Working Memory Circuits in Pediatric Bipolar Disorder and Attention Deficit Hyperactivity Disorder

    Science.gov (United States)

    Passarotti, Alessandra M.; Sweeney, John A.; Pavuluri, Mani N.

    2010-01-01

    Objective This fMRI study examined how working memory circuits are affected by face emotion processing in pediatric bipolar disorder (PBD) and attention-deficit hyperactivity disorder (ADHD). Methods Twenty-three patients with bipolar disorder, 14 patients with ADHD and 19 healthy controls (HC) (mean age = 13.36 ± 2.55) underwent an affective 2-back fMRI task with blocks of happy, angry and neutral faces. Results For angry vs neutral faces PBD patients, relative to ADHD patients, exhibited increased activation in subgenual anterior cingulate cortex (ACC) and orbitofrontal cortex, and reduced activation in dorsolateral prefrontal cortex (DLPFC) and premotor cortex. Relative to HC the PBD group showed no increased activation and reduced activation at the junction of DLPFC and ventrolateral prefrontal cortex (VLPFC). Relative to HC the ADHD patients exhibited greater activation in DLPFC and reduced activation in ventral and medial PFC, pregenual ACC, striatum and temporo-parietal regions. For happy vs neutral faces, relative to ADHD the PBD group exhibited greater activation in bilateral caudate, and relative to HC it showed increased activation in DLPFC, striatal and parietal regions, and no reduced activation. The ADHD group, compared to HC, showed no reduced activation and increased activation in regions that were under-active for the angry face condition. Conclusions Relative to the ADHD group the PBD group exhibited greater deployment of the emotion processing circuitry and reduced deployment of working memory circuitry. Commonalities across PBD and ADHD patients, relative to HC, entailed cortico-subcortical activity that is reduced under negative emotional challenge, and increased under positive emotional challenge. PMID:20855051

  14. Testing principle working mechanisms of the health action process approach for subjective physical age groups.

    Science.gov (United States)

    Wienert, Julian; Kuhlmann, Tim; Fink, Sebastian; Hambrecht, Rainer; Lippke, Sonia

    2016-01-01

    This study investigated differences in social-cognitive predictors and self-regulatory planning, as proposed by the health action process approach (HAPA), across three different subjective physical age groups for physical activity. With a cross-sectional design, 521 participants across the chronological age span from 25 to 86 years (M = 48.79; SD = 12.66) were separated into three groups: those who feel physically younger than they are in terms of chronological age, the same perceived and chronological age, and feeling physically older compared to their chronological age. Participants were assessed regarding their perceived vulnerability, outcome expectancies, general intentions, planning, self-efficacy, and stages of physical activity (non-intenders, intenders, and actors). Data were analysed via mean comparison and multigroup structural equation modelling. Mean differences for all but one construct were eminent in all groups, generally showing that those feeling physically younger also report better social-cognitive predictors of physical activity (e.g. lower perceived vulnerability) in comparison to those who feel the same age or older. The model showed that basic working mechanisms of the HAPA can be applied to all groups. With that, the results provide for the first time evidence that principle working mechanism of the HAPA can be applied to all subjective physical age groups. These may be used to tailor health promoting interventions according to participants' needs as a more suitable proxy than chronological age.

  15. Work Models in the Design Process for House Interior and Exterior: Physical or Virtual?

    Science.gov (United States)

    Bradecki, Tomasz; Uherek-Bradecka, Barbara

    2017-10-01

    The article presents the effects of research on different types of models of single family houses and multifamily houses. Exterior layout and interior functional layout are the main drivers for the final result of a design. Models are an important medium for presentation of architectural designs and play a pivotal role in explaining the first idea to people and potential clients. Although 3D models have unlimited possibilities of representation, some people cannot understand or ‘feel’ the designed space. The authors try to test how to combine the interior and the exterior in a single synthetic model. Several models of different houses have been presented in the article. All the case studies were developed with physical models, 3D models, and 2D hand sketches. The main focus of the work with the models was to achieve a coherent vision for future feeling of open space in designed houses. The research shows how synthetic models might be helpful in the design process. The research was carried in the URBAN model research group (urbanmodel.org, Gliwice, Poland) that consists of academic researchers and architects. The models reflect architectural experience gathered by the authors during their work on theoretical models, architectural projects and by supervision on site during construction site visits. Conclusions might be helpful for developers, architects, interior designers and architecture students.

  16. People at Work: Modelling Human Performance in Shop Floor for Process Improvement in Manufacturing Enterprises

    Science.gov (United States)

    Khalil, Siti Nurhaida; Weston, R. H.; Ajaefobi, J. O.

    Predicting actual human performance in manufacturing plants is difficult and not a straightforward task. This motivates further investigation of ways of modelling, measuring and predicting behaviours of people working in production systems. People can be modelled in terms of their competences in relation to the roles they play in realising enterprise activities. This research introduces a combined application of Enterprise Modelling (EM) and Simulation Modelling (SM) to investigate and understand how people systems can be matched to process-oriented roles in production situations. EM facilitates the development of static models of structural aspects of people system from both top-down and bottom-up points of view. It can also provide organisational models in terms of roles and role relationships. Developed versions of EMs can also explicitly define key attributes of current and possible future ‘work contexts in which productions systems’ are used. In this way any given EM can underpin the creation of multiple SMs that characterise important structural and dynamic aspects of production systems (in terms of human configuration, performance, flexibility, etc), and production throughput within specific contexts of use. The research methods are illustrated via the use of case studies in which roles that people play in the production systems of an international company were studied and modelled. The findings of related SM experiments have generated useful insights for industrialist and academics.

  17. [Factors of working environment and process on non-ferrous metallurgy enterprises in Bashkortostan Republic and workers' occupational health].

    Science.gov (United States)

    Bakirov, A B; Takaev, R M; Kondrova, N S; Shaĭkhlislamova, E R

    2011-01-01

    The authors studied factors of working environment and process on nonferrous metallurgy enterprises in Bashkortostan Republic and evaluated their influence on the workers' occupational health over 1997-2009, with consideration of occupation, sex, age, length of service, work conditions and characters. The article demonstrates that sanitary and hygienic characteristics of occupations connected with machinery operation are prone to increased integral evaluation of work conditions due to underestimation of actual hardiness and intensity of work.

  18. Nursing terminology as a work process instrument of nurses in collective health.

    Science.gov (United States)

    Cavalcante, Marília Daniella Machado Araújo; Larocca, Liliana Müller; Chaves, Maria Marta Nolasco; Cubas, Márcia Regina; Piosiadlo, Laura Christina Macedo; Mazza, Verônica de Azevedo

    2016-01-01

    To analyze the use of nursing terminology as an instrument of the nursing work process in Collective Health. Exploratory case study. For data collection was conducted a group interview with 24 nurses working in health units of a municipality in south central Paraná, Brazil. Data were analyzed in the light of interdependence between the structural, particular and singular dimensions contained in the Theory of Nursing Praxis Intervention in Collective Health. The situations interfering with improper use were the lack of knowledge about the origin and purpose of terminology, lack of training, and non-mandatory use. Although the nursing terminology is used as an instrument in the nursing work process in collective health, it requires training to be recognized as a classification system. At the same time, institutional policies should be employed to ensure the effective use of these instruments. Analisar a utilização de terminologia de enfermagem como instrumento do processo de trabalho do enfermeiro em Saúde Coletiva. Estudo de caso exploratório. Para coleta de dados foi realizada entrevista em grupo com 24 enfermeiros que atuam nas unidades de saúde de um município no centro-sul do Paraná, Brasil. Os dados foram analisados à luz da interdependência entre as dimensões estrutural, particular e singular contidas na Teoria da Intervenção Práxica de Enfermagem em Saúde Coletiva. As situações que interferiram na utilização inadequada foram o desconhecimento sobre origem e finalidade da terminologia, a falta de treinamento e a não obrigatoriedade de uso. A terminologia de enfermagem, apesar de utilizada como instrumento no processo de trabalho de enfermeiros em Saúde Coletiva, necessita de capacitação para ser reconhecida como sistema classificatório. Ao mesmo tempo, políticas institucionais devem ser empregadas no intuito de garantir a efetiva utilização destes instrumentos.

  19. Effects of working memory span on processing of lexical associations and congruence in spoken discourse.

    Science.gov (United States)

    Boudewyn, Megan A; Long, Debra L; Swaab, Tamara Y

    2013-01-01

    The goal of this study was to determine whether variability in working memory (WM) capacity and cognitive control affects the processing of global discourse congruence and local associations among words when participants listened to short discourse passages. The final, critical word of each passage was either associated or unassociated with a preceding prime word (e.g., "He was not prepared for the fame and fortune/praise"). These critical words were also either congruent or incongruent with respect to the preceding discourse context [e.g., a context in which a prestigious prize was won (congruent) or in which the protagonist had been arrested (incongruent)]. We used multiple regression to assess the unique contribution of suppression ability (our measure of cognitive control) and WM capacity on the amplitude of individual N400 effects of congruence and association. Our measure of suppression ability did not predict the size of the N400 effects of association or congruence. However, as expected, the results showed that high WM capacity individuals were less sensitive to the presence of lexical associations (showed smaller N400 association effects). Furthermore, differences in WM capacity were related to differences in the topographic distribution of the N400 effects of discourse congruence. The topographic differences in the global congruence effects indicate differences in the underlying neural generators of the N400 effects, as a function of WM. This suggests additional, or at a minimum, distinct, processing on the part of higher capacity individuals when tasked with integrating incoming words into the developing discourse representation.

  20. Numerical Simulation of the Working Process in the Twin Screw Vacuum Pump

    Science.gov (United States)

    Lu, Yang; Fu, Yu; Guo, Bei; Fu, Lijuan; Zhang, Qingqing; Chen, Xiaole

    2017-08-01

    Twin screw vacuum pumps inherit the advantages of screw machinery, such as high reliability, stable medium conveying, small vibration, simple and compact structures, convenient operation, etc, which have been widely used in petrochemical and air industry. On the basis of previous studies, this study analyzed the geometric features of variable pitch of the twin screw vacuum pump such as the sealing line, the meshing line and the volume between teeth. The mathematical model of numerical simulation of the twin screw vacuum pump was established. The leakage paths of the working volume including the sealing line and the addendum arc were comprehensively considered. The corresponding simplified geometric model of leakage flow was built up for different leak paths and the flow coefficients were calculated. The flow coefficient value range of different leak paths was given. The results showed that the flow coefficient of different leak paths can be taken as constant value for the studied geometry. The analysis of recorded indicator diagrams showed that the increasing rotational speed can dramatically decrease the exhaust pressure and the lower rotational speed can lead to over-compression. The pressure of the isentropic process which was affected by leakage was higher than the theoretical process.

  1. Attention training improves aberrant neural dynamics during working memory processing in veterans with PTSD.

    Science.gov (United States)

    McDermott, Timothy J; Badura-Brack, Amy S; Becker, Katherine M; Ryan, Tara J; Bar-Haim, Yair; Pine, Daniel S; Khanna, Maya M; Heinrichs-Graham, Elizabeth; Wilson, Tony W

    2016-12-01

    Posttraumatic stress disorder (PTSD) is associated with executive functioning deficits, including disruptions in working memory (WM). Recent studies suggest that attention training reduces PTSD symptomatology, but the underlying neural mechanisms are unknown. We used high-density magnetoencephalography (MEG) to evaluate whether attention training modulates brain regions serving WM processing in PTSD. Fourteen veterans with PTSD completed a WM task during a 306-sensor MEG recording before and after 8 sessions of attention training treatment. A matched comparison sample of 12 combat-exposed veterans without PTSD completed the same WM task during a single MEG session. To identify the spatiotemporal dynamics, each group's data were transformed into the time-frequency domain, and significant oscillatory brain responses were imaged using a beamforming approach. All participants exhibited activity in left hemispheric language areas consistent with a verbal WM task. Additionally, veterans with PTSD and combat-exposed healthy controls each exhibited oscillatory responses in right hemispheric homologue regions (e.g., right Broca's area); however, these responses were in opposite directions. Group differences in oscillatory activity emerged in the theta band (4-8 Hz) during encoding and in the alpha band (9-12 Hz) during maintenance and were significant in right prefrontal and right supramarginal and inferior parietal regions. Importantly, following attention training, these significant group differences were reduced or eliminated. This study provides initial evidence that attention training improves aberrant neural activity in brain networks serving WM processing.

  2. Differential contributions of dorsolateral and frontopolar cortices to working memory processes in the primate

    Directory of Open Access Journals (Sweden)

    Erica A. Boschin

    2015-10-01

    Full Text Available The ability to maintain and manipulate information across temporal delays is a fundamental requirement to bridge the gap between perception and action. In the case of higher-order behavior, the maintenance of rules and strategies is particularly helpful in bridging this gap. The prefrontal cortex (PFC has long been considered critical for such processes, and research has focused on different subdivisions of PFC to gain an insight into their diverse contributions to these mechanisms. Substantial evidence indicates that dorsolateral PFC (dlPFC is an important structure for maintaining information across delays, with cells actively firing across delays and lesions to this region causing deficits in tasks involving delayed responses and maintenance of rules online. Frontopolar cortex (FP, on the other hand, appears to show the opposite pattern of results, with cells not firing across delays and lesions to this region not affecting the same rule-based, delayed response tasks that are impaired following dlPFC lesions. The body of evidence therefore suggests that dlPFC and FP’s contributions to working memory differ. In this article, we will provide a perspective on how these regions might implement distinct but complementary and interactive functions that contribute to more general temporally-extended processes and support flexible, dynamic behavior.

  3. Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Y.; Wan, L.; Guo, Z. H.; Sun, C. Y.; Yang, D. J.; Zhang, Q. D.; Li, Y. L.

    2017-02-01

    Isothermal compression experiment of AZ80 magnesium alloy was conducted by Gleeble thermo-mechanical simulator in order to quantitatively investigate the work hardening (WH), strain rate sensitivity (SRS) and temperature sensitivity (TS) during hot processing of magnesium alloys. The WH, SRS and TS were described by Zener-Hollomon parameter (Z) coupling of deformation parameters. The relationships between WH rate and true strain as well as true stress were derived from Kocks-Mecking dislocation model and validated by our measurement data. The slope defined through the linear relationship of WH rate and true stress was only related to the annihilation coefficient Ω. Obvious WH behavior could be exhibited at a higher Z condition. Furthermore, we have identified the correlation between the microstructural evolution including β-Mg17Al12 precipitation and the SRS and TS variations. Intensive dynamic recrystallization and homogeneous distribution of β-Mg17Al12 precipitates resulted in greater SRS coefficient at higher temperature. The deformation heat effect and β-Mg17Al12 precipitate content can be regarded as the major factors determining the TS behavior. At low Z condition, the SRS becomes stronger, in contrast to the variation of TS. The optimum hot processing window was validated based on the established SRS and TS values distribution maps for AZ80 magnesium alloy.

  4. DEVELOPMENT OF PHYSICS STUDENT WORK SHEET (SWS TO BUILD SCIENCE PROCESS SKILL VALUED CONSERVATION

    Directory of Open Access Journals (Sweden)

    D. Yulianti

    2015-07-01

    Full Text Available Student Work Sheet (SWS which contains only a summary of the material and exercises does not train students to investigate and develop conservation values. The research objective is to also prepared worksheets guided inquiry that can enhance science process skills, understanding of the concept and develop conservation value. Elements of inquiry and conservation value generated through work instructions and investigation. The study was performed by using one group pretest-posttest design. Research procedures include observation and identification of weaknesses worksheets, planning, early product development and initial field trials. Feasibility and legibility using questionnaires and tests hiatus. The value of understanding the concept derived from the pretest-posttest. Data science process skills gained from the observation during the lesson. Conservation values obtained from the students' self-assessment questionnaire and assessment questionnaire between friends. The analysis showed guided inquiry SWS easy to understand and very fit for use as teaching materials. Test gain showed guided inquiry SWS can enhance science process skills and conceptual understanding, and can be used as a medium to develop conservation value.LKS yang hanya berisi ringkasan materi dan latihan soal tidak melatih siswa melakukan penyelidikan dan mengembangkan nilai konservasi. Tujuan penelitian R&D ini adalah menyususn LKS yang mampu meningkatkan keterampilan proses sains, pemahaman konsep dan nilai konservasi. Nilai konservasi dimunculkan melalui petunjuk kerja dan kegiatan penyelidikan.Ujicoba menggunakanOne Group Pretest-Posttest Design. Prosedur penelitian meliputi observasi dan identifikasi kelemahan LKS, perencanaan, pengembangan produk awal dan uji coba lapangan awal. Uji kelayakan dan keterbacaan menggunakan angket dan tes rumpang. Nilai pemahaman konsep  diperoleh dari pretest-posttest. Data keterampilan proses sains diperoleh dari hasil observasi

  5. 40 CFR 35.4161 - Does the TAG application process affect the schedule for work at my site?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Does the TAG application process affect... Assistance How to Apply for A Tag § 35.4161 Does the TAG application process affect the schedule for work at my site? No, the schedule for response activities at your site is not affected by the TAG process. ...

  6. Levels of processing in working memory: differential involvement of frontotemporal networks.

    Science.gov (United States)

    Rose, Nathan S; Craik, Fergus I M; Buchsbaum, Bradley R

    2015-03-01

    How does the brain maintain to-be-remembered information in working memory (WM), particularly when the focus of attention is drawn to processing other information? Cognitive models of WM propose that when items are displaced from focal attention recall involves retrieval from long-term memory (LTM). In this fMRI study, we tried to clarify the role of LTM in performance on a WM task and the type of representation that is used to maintain an item in WM during rehearsal-filled versus distractor-filled delays. Participants made a deep or shallow levels-of-processing (LOP) decision about a single word at encoding and tried to recall the word after a delay filled with either rehearsal of the word or a distracting math task. Recalling one word after 10 sec of distraction demonstrated behavioral and neural indices of retrieval from LTM (i.e., LOP effects and medial-temporal lobe activity). In contrast, recall after rehearsal activated cortical areas that reflected reporting the word from focal attention. In addition, areas that showed an LOP effect at encoding (e.g., left ventrolateral VLPFC and the anterior temporal lobes [ATLs]) were reactivated at recall, especially when recall followed distraction. Moreover, activity in left VLPFC during encoding, left ATL during the delay, and left hippocampus during retrieval predicted recall success after distraction. Whereas shallow LOP and rehearsal-related areas supported active maintenance of one item in focal attention, the behavioral processes and neural substrates that support LTM supported recall of one item after it was displaced from focal attention.

  7. Nano surface generation of grinding process using carbon nano tubes

    Indian Academy of Sciences (India)

    Pour point-temperature at which the rate of flow will stop. 2.4 Selection of work piece and ... gaps and coolant flow rate should be selected for efficient in-process dressing. Normally arc- shaped electrodes are ... AFM (figure 4). The technique for measuring these forces is called lateral force, or frictional force microscopy.

  8. The impact of mechanical properties of rock to the collision of rock piece

    Directory of Open Access Journals (Sweden)

    Borut Macuh

    2007-06-01

    Full Text Available The paper presents the analytical solution of the rock piece motion considering influences of geometrical and mechanical characteristics of rock mass on the arbitrary slope. The main objective of the paper is to determine the motion of the rock piece considering possibility of rock piece failure due to collision. Brief description of the analytical solution of the rock piece motion on a steep slope is given. The laboratory tests were performed to determine uniaxial compressive strength and elastic properties of the considered rock mass. Further, velocities that cause rock piece failure were determined. These maximum velocities indirectly belong to certain mass of rock piece and can be lower than velocities calculated in rock-fall analysis for certain slope geometry. Consequently, the energy magnitude is limited, because at certain velocity and mass of rock piece bigger pieces crash at collision.

  9. Effects of working memory contents and perceptual load on distractor processing: When a response-related distractor is held in working memory.

    Science.gov (United States)

    Koshino, Hideya

    2017-01-01

    Working memory and attention are closely related. Recent research has shown that working memory can be viewed as internally directed attention. Working memory can affect attention in at least two ways. One is the effect of working memory load on attention, and the other is the effect of working memory contents on attention. In the present study, an interaction between working memory contents and perceptual load in distractor processing was investigated. Participants performed a perceptual load task in a standard form in one condition (Single task). In the other condition, a response-related distractor was maintained in working memory, rather than presented in the same stimulus display as a target (Dual task). For the Dual task condition, a significant compatibility effect was found under high perceptual load; however, there was no compatibility effect under low perceptual load. These results suggest that the way the contents of working memory affect visual search depends on perceptual load. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Eight piece quadrupole magnet, method for aligning quadrupole magent pole tips

    Energy Technology Data Exchange (ETDEWEB)

    Jaski, Mark S.; Liu, Jie; Donnelly, Aric T.; Downey, Joshua S.; Nudell, Jeremy J.; Jain, Animesh

    2018-01-30

    The invention provides an alternative to the standard 2-piece or 4-piece quadrupole. For example, an 8-piece and a 10-piece quadrupole are provided whereby the tips of each pole may be adjustable. Also provided is a method for producing a quadrupole using standard machining techniques but which results in a final tolerance accuracy of the resulting construct which is better than that obtained using standard machining techniques.

  11. Electrification: Connecting the Pieces in the Broader View

    Energy Technology Data Exchange (ETDEWEB)

    Gearhart, Chris C [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-11-28

    Presented at the SELECT Annual Meeting on September 26, 2017, this PowerPoint presentation gives an overview of connectivity and automation and how these new technologies will impact society in both known and unknown ways. Electrification challenges and opportunities are also outlined as without electrification, connectivity and automation will just magnify the negative health, climate and economic problems of the current transportation systems. Electrification can provide benefits while mitigating the negative consequences. And with careful connection of all of the pieces from materials up through controls, a sustainable transportation eco-system is attainable.

  12. Multiple piece turbine engine airfoil with a structural spar

    Science.gov (United States)

    Vance, Steven J [Orlando, FL

    2011-10-11

    A multiple piece turbine airfoil having an outer shell with an airfoil tip that is attached to a root with an internal structural spar is disclosed. The root may be formed from first and second sections that include an internal cavity configured to receive and secure the one or more components forming the generally elongated airfoil. The internal structural spar may be attached to an airfoil tip and place the generally elongated airfoil in compression. The configuration enables each component to be formed from different materials to reduce the cost of the materials and to optimize the choice of material for each component.

  13. Characterization on carbide of a novel steel for cold work roll during solidification process

    Energy Technology Data Exchange (ETDEWEB)

    Guo, J.; Liu, L.G.; Li, Q.; Sun, Y.L. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Gao, Y.K. [Institute of Aeronautical Materials, Beijing 100095 (China); Ren, X.J. [School of Engineering, Liverpool John Moores University, Liverpool L3 3AF (United Kingdom); Yang, Q.X., E-mail: qxyang@ysu.edu.cn [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China)

    2013-05-15

    A novel steel for cold work roll was developed in this work. Its phase structures were determined by X-ray diffraction, and phase transformation temperatures during the cooling process were measured by Differential Scanning Calorimeter. The Fe–C isopleths of the steel were calculated by Thermo-Calc to preliminarily determine the characteristic temperatures of the different phases. Then the specimens were quenched at these characteristic temperatures. The typical microstructures were observed by Optical Microscopy and Field Emission Scanning Electron Microscopy with Energy Disperse Spectroscopy. The results show that α-Fe, MC, M{sub 2}C and M{sub 7}C{sub 3} precipitate when the specimen is cooled slowly to room temperature. According to the DSC curve and the Fe–C isopleths, the characteristic temperatures of the phase transformation and carbide precipitation are chosen as 1380 °C, 1240 °C, 1200 °C and 1150 °C respectively. Primary austenite precipitates at 1380 °C, then eutectic reaction occurs in residual liquid after quenching and the eutectic microstructures distribute along the crystal grain boundary. The eutectic MC is leaf-like and eutectic M{sub 2}C is fibrous-like. Both of them precipitate in ternary eutectic reaction simultaneously at 1240 °C, grow together in the form of dendrite along the crystal grain boundary. Secondary MC precipitates from the austenitic matrix at 1200 °C and nucleates at the position where eutectic MC located accompanied by the dissolving of eutectic carbides. The mixed secondary M{sub 2}C and M{sub 7}C{sub 3} precipitate at 1150 °C. The secondary M{sub 2}C is strip-like and honeycomb-like, while the M{sub 7}C{sub 3} is chrysanthemum-like and maze-like. - Highlights: • The solidification process was analyzed by Thermo-Calc, DSC, XRD and SEM observation. • Primary and secondary carbides precipitated during solidification were determined. • The three dimensional morphologies of all carbides was observed. • The

  14. Injured workers’ perception of loss and gain in the return to work process

    Directory of Open Access Journals (Sweden)

    Lai HS

    2017-02-01

    Full Text Available Hon Sun Lai,1,2 Grace PY Szeto,1 Chetwyn CH Chan3 1Department of Rehabilitation Sciences, The Hong Kong Polytechnic University, 2Total Rehabilitation Management (Hong Kong Limited, 3Applied Cognitive Neuroscience Laboratory, Department of Rehabilitation Sciences, The Hong Kong Polytechnic University, Hong Kong Abstract: When a worker is injured at work, he has to face a tough decision-making process about when and how to return to work (RTW. This study tests how the prospect theory can be applied to influence the injured workers’ perceptions about this important choice. One hundred forty-one injured workers were presented with wage- and pain-related information in four different message framing (negatively or positively and precision (smaller or larger number conditions. After exposure to the specific combination of this wage and pain information, the participants were asked to express intentions to RTW in terms of perceived chance, confidence, and anticipated sick leave duration. When asked to predict their RTW outcome, 101 participants (72.3% responded favorably, whereas only 40 (27.7% indicated an expectation for staying on sick leave. The present results did not show significant differences in the participants’ responses to the positively and negatively framed information about wage and pain. However, it was noted that the control group that was presented with positive framing for both “wage” and “pain” information showed higher scores in expectation and confidence for RTW, whereas the Ambivalent Group that had both negative messages showed lower scores. Seventy-nine participants who had ≥60% perceived improvement in condition were selected for further analysis, and those who were presented with “wage loss” information rated significantly higher perceived chance of RTW than those in the “pain gain” group. More in-depth investigation is warranted on this topic, with a larger sample of injured workers to investigate the

  15. The Integration of Realistic Episodic Memories Relies on Different Working Memory Processes: Evidence from Virtual Navigation

    Directory of Open Access Journals (Sweden)

    Gaën Plancher

    2018-01-01

    central elements. By contrast, the prevention of visuo-spatial maintenance interfered both with the encoding of the temporal context and with the binding. These results suggest that the integration of realistic episodic memories relies on different working memory processes that depend on the nature of the traces.

  16. 29 CFR 780.314 - Operations customarily * * * paid on a piece rate basis * * *.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Operations customarily * * * paid on a piece rate basis... * * * paid on a piece rate basis * * *. A significant test of the exemption is that the hand harvest operation “has been, and is customarily and generally recognized as having been, paid on a piece rate basis...

  17. Theoretical and experimental contributions regarding the impact on work environment of welding processes in MIG / MAG protective gas medium

    National Research Council Canada - National Science Library

    Gh. Amza; M. Groza Dragomir; S. Paise

    2013-01-01

    .... To assess the impact on the work environment of such welding processes the pollution coefficient Cp was defined based on the material balance equation as the ratio of the mass of all materials used...

  18. Prejudice in practitioners who work with socially excluded people in Andalusia: A dual process approach

    Directory of Open Access Journals (Sweden)

    José-Luis Álvarez-Castillo

    2016-12-01

    Full Text Available It is assumed that the professional profile of those who work with socially excluded people is not compatible with the maintenance of prejudices against the group they help. The current study tested this hypothesis regarding the Dual Process Cognitive-Motivational Model of Duckitt (2001 and Duckitt and Sibley (2010. Data from 565 Andalusian professionals were collected in a cross-sectional survey, using measures of socio-demographics, personality, values, ideological attitudes, political position, and prejudice. The model fitted to data reproduced the basic relations in the hypothesized model, although its explanatory power was limited. Prejudice was significantly explained by both paths (authoritarianism and dominance, leading to the conclusion that the reduced level of prejudice held by professionals corresponds to the perception of socially excluded people as a dissident group. This suggests that professional identity as a broad construct may moderate the variance in prejudice. Finally, these findings also suggest that the professional development of social workers should be promoted.

  19. Design and Characterization of 64K Pixels Chips Working in Single Photon Processing Mode

    CERN Document Server

    Llopart Cudie, Xavier; Campbell, M

    2007-01-01

    Progress in CMOS technology and in fine pitch bump bonding has made possible the development of high granularity single photon counting detectors for X-ray imaging. This thesis studies the design and characterization of three pulse processing chips with 65536 square pixels of 55 µm x 55 µm designed in a commercial 0.25 µm 6-metal CMOS technology. The 3 chips share the same architecture and dimensions and are named Medipix2, Mpix2MXR20 and Timepix. The Medipix2 chip is a pixel detector readout chip consisting of 256 x 256 identical elements, each working in single photon counting mode for positive or negative input charge signals. The preamplifier feedback provides compensation for detector leakage current on a pixel by pixel basis. Two identical pulse height discriminators are used to define an energy window. Every event falling inside the energy window is counted with a 13 bit pseudo-random counter. The counter logic, based in a shift register, also behaves as the input/output register for the pixel. Each...

  20. Electronic working length determination in primary teeth by ProPex and Digital Signal Processing.

    Science.gov (United States)

    Nelson-Filho, Paulo; Lucisano, Marcela Pacífico; Leonardo, Mário Roberto; da Silva, Raquel Assed Bezerra; da Silva, Léa Assed Bezerra

    2010-12-01

    The purpose of this study was to evaluate the accuracy of electronic apex locators Digital Signal Processing (DSP) and ProPex, for root canal length determination in primary teeth. Fifteen primary molars (a total of 34 root canals) were divided into two groups: Group I - without physiological resorption (n = 16); and Group II - with physiological resorption (n = 18). The length of each canal was measured by introducing a file until its tip was visible and then it was retracted 1 mm. For electronic measurement, the devices were set to 1 mm short of the apical resorption. The data were analysed statistically using the intraclass correlation coefficient (ICC). Results showed that the ICC was high for both electronic apex locators in all situations - with (ICC: DSP = 0.82 and Propex = 0.89) or without resorption (ICC: DSP = 0.92 and Propex = 0.90). Both apex locators were extremely accurate in determining the working length in primary teeth, both with or without physiological resorption. © 2010 The Authors. Australian Endodontic Journal © 2010 Australian Society of Endodontology.

  1. Math anxiety and developmental dyscalculia: A study on working memory processes.

    Science.gov (United States)

    Mammarella, Irene C; Hill, Francesca; Devine, Amy; Caviola, Sara; Szűcs, Dénes

    2015-01-01

    Although many children encounter difficulties in arithmetic, the underlying cognitive and emotive factors are still not fully understood. This study examined verbal and visuospatial short-term memory (STM) and working memory (WM) performance in children with developmental dyscalculia (DD) and high mathematics anxiety (MA) compared with typically developing (TD) children. Groups were matched on reading comprehension performance and IQ as well as on general anxiety. We aimed to test whether children with DD and MA were differently impaired in verbal and visuospatial STM and WM. Children were individually tested with four computerized tasks: two STM tasks (forward verbal and visuospatial recall) and two WM tasks (backward verbal and visuospatial recall). Relative to children with TD, those with DD did not show impairments on the forward or backward verbal tasks, but showed specific impairments in the visuospatial WM task. In contrast, children with MA were particularly impaired in the verbal WM task. Knowing the underlying cognitive processes that differentiate why children with DD and MA fail in math could have both educational and clinical implications.

  2. Emotion perception and executive control interact in the salience network during emotionally charged working memory processing.

    Science.gov (United States)

    Luo, Yu; Qin, Shaozheng; Fernández, Guillén; Zhang, Yu; Klumpers, Floris; Li, Hong

    2014-11-01

    Processing of emotional stimuli can either hinder or facilitate ongoing working memory (WM); however, the neural basis of these effects remains largely unknown. Here we examined the neural mechanisms of these paradoxical effects by implementing a novel emotional WM task in an fMRI study. Twenty-five young healthy participants performed an N-back task with fearful and neutral faces as stimuli. Participants made more errors when performing 0-back task with fearful versus neutral faces, whereas they made fewer errors when performing 2-back task with fearful versus neutral faces. These emotional impairment and enhancement on behavioral performance paralleled significant interactions in distributed regions in the salience network including anterior insula (AI) and dorsal cingulate cortex (dACC), as well as in emotion perception network including amygdala and temporal-occipital association cortex (TOC). The dorsal AI (dAI) and dACC were more activated when comparing fearful with neutral faces in 0-back task. Contrarily, dAI showed reduced activation, while TOC and amygdala showed stronger responses to fearful as compared to neutral faces in the 2-back task. These findings provide direct neural evidence to the emerging dual competition model suggesting that the salience network plays a critical role in mediating interaction between emotion perception and executive control when facing ever-changing behavioral demands. Copyright © 2014 Wiley Periodicals, Inc.

  3. Understanding the Relative Contributions of Lower-Level Word Processes, Higher-Level Processes, and Working Memory to Reading Comprehension Performance in Proficient Adult Readers

    Science.gov (United States)

    Hannon, Brenda

    2012-01-01

    Although a considerable amount of evidence has been amassed regarding the contributions of lower-level word processes, higher-level processes, and working memory to reading comprehension, little is known about the relationships among these sources of individual differences or their relative contributions to reading comprehension performance. This…

  4. The Effect of Keyboard-Based Word Processing on Students with Different Working Memory Capacity during the Process of Academic Writing

    Science.gov (United States)

    Van Der Steen, Steffie; Samuelson, Dianne; Thomson, Jennifer M.

    2017-01-01

    This study addresses the current debate about the beneficial effects of text processing software on students with different working memory (WM) during the process of academic writing, especially with regard to the ability to display higher-level conceptual thinking. A total of 54 graduate students (15 male, 39 female) wrote one essay by hand and…

  5. The Effect of Keyboard-Based Word Processing on Students With Different Working Memory Capacity During the Process of Academic Writing

    NARCIS (Netherlands)

    Van der Steen, Steffie; Samuelson, Dianne; Thomson, Jennifer M.

    This study addresses the current debate about the beneficial effects of text processing software on students with different working memory (WM) during the process of academic writing, especially with regard to the ability to display higher-level conceptual thinking. A total of 54 graduate students

  6. An Independent Evaluation of the Switching Operations Facility Analysis 2010 Working Group's Processes

    Science.gov (United States)

    2009-12-01

    The Switching Operations Fatality Analysis (SOFA) Working Group was formed to analyze the factors contributing to fatalities in switching operations. The 2010 Working Group invited an independent team of evaluators to assess the thoroughness of the S...

  7. Linguistic Theory and Cognitive Neuroscience of Language. Working Memory and Syntactic Processing in Sentence Comprehension

    National Research Council Canada - National Science Library

    Caplan, David; Waters, Gloria

    2001-01-01

    ...., it requires a working memory system. Experimental results in normal subjects and patients with various brain lesions indicate that measurements of working memory that are derived from commonly used tests of this function...

  8. How working memory relates to children's reading comprehension: the importance of domain-specificity in storage and processing.

    Science.gov (United States)

    Nouwens, Suzan; Groen, Margriet A; Verhoeven, Ludo

    2017-01-01

    Working memory is considered a well-established predictor of individual variation in reading comprehension in children and adults. However, how storage and processing capacities of working memory in both the phonological and semantic domain relate to reading comprehension is still unclear. In the current study, we investigated the contribution of phonological and semantic storage, and phonological and semantic processing to reading comprehension in 123 Dutch children in fifth grade. We conducted regression and mediation analyses to find out to what extent variation in reading comprehension could be explained by storage and processing capacities in both the phonological and the semantic domain, while controlling for children's decoding and vocabulary. The analyses included tasks that reflect storage only, and working memory tasks that assess processing in addition to storage. Regression analysis including only storage tasks as predictor measures, revealed semantic storage to be a better predictor of reading comprehension than phonological storage. Adding phonological and semantic working memory tasks as additional predictors to the model showed that semantic working memory explained individual variation in reading comprehension over and above all other memory measures. Additional mediation analysis made it clear that semantic storage contributed indirectly to reading comprehension via semantic working memory, indicating that semantic storage tapped by working memory, in addition to processing capacities, explains individual variation in reading comprehension. It can thus be concluded that semantic storage plays a more important role in children's reading comprehension than previously thought.

  9. Cooling profile following prosthetic preparation of 1-piece dental implants.

    Science.gov (United States)

    Cohen, Omer; Gabay, Eran; Machtei, Eli E

    2010-01-01

    The aim of this study was to evaluate the effect of water irrigation on heat dissipation kinetics following abutment preparation of 1-piece dental implants. UNO 1-piece dental implants were mounted on Plexiglas apparatus clamping the implant at the collar. T-type thermocouple was attached to the first thread of the implant and recorded thermal changes at 100 millisecond intervals. Implants were prepared using highspeed dental turbine at 400,000 RPM with a coarse diamond bur. Once temperature reached 47 degrees C, abutment preparation was discontinued. Thirty implants were divided into 2 groups. Group A: Passive cooling without water irrigation. Group B: Cooling with turbine's water spray adjacent to the implant (30 mL/min). The following parameters were measured: T47 (time from peak temperature to 47 degrees C), T50%, T75% (time until the temperature amplitude decayed by 50% and 75%, respectively), dTemp50%/dt decay, and dTemp75%/dt decay (cooling rate measured at 50% and 75% of amplitude decay, respectively). Water spray irrigation significantly reduced T47 (1.37+/-0.29 seconds vs 19.97+/-3.06 seconds, Pspray irrigation also increased cooling capacity ninefold: dTemp50%/dt decay (4.14+/-0.61 degrees C/s vs 0.48+/-0.06 degrees C/s, Pspray adjacent to the abutment following the cessation of implant preparation might prove beneficial for rapid cooling of the implant.

  10. Interrelationships between Working Memory, Processing Speed, and Language Development in the Age Range 2-4 Years

    Science.gov (United States)

    Newbury, Jayne; Klee, Thomas; Stokes, Stephanie F.; Moran, Catherine

    2016-01-01

    Purpose: This study explored associations between working memory and language in children aged 2-4 years. Method: Seventy-seven children aged 24-30 months were assessed on tests measuring language, visual cognition, verbal working memory (VWM), phonological short-term memory (PSTM), and processing speed. A standardized test of receptive and…

  11. How Working Memory Relates to Children's Reading Comprehension: The Importance of Domain-Specificity in Storage and Processing

    Science.gov (United States)

    Nouwens, Suzan; Groen, Margriet A.; Verhoeven, Ludo

    2017-01-01

    Working memory is considered a well-established predictor of individual variation in reading comprehension in children and adults. However, how storage and processing capacities of working memory in both the phonological and semantic domain relate to reading comprehension is still unclear. In the current study, we investigated the contribution of…

  12. Working Memory and Arithmetic Calculation in Children: The Contributory Roles of Processing Speed, Short-Term Memory, and Reading

    Science.gov (United States)

    Berg, Derek H.

    2008-01-01

    The cognitive underpinnings of arithmetic calculation in children are noted to involve working memory; however, cognitive processes related to arithmetic calculation and working memory suggest that this relationship is more complex than stated previously. The purpose of this investigation was to examine the relative contributions of processing…

  13. Activation and Binding in Verbal Working Memory: A Dual-Process Model for the Recognition of Nonwords

    Science.gov (United States)

    Oberauer, Klauss; Lange, Elke B.

    2009-01-01

    The article presents a mathematical model of short-term recognition based on dual-process models and the three-component theory of working memory [Oberauer, K. (2002). Access to information in working memory: Exploring the focus of attention. "Journal of Experimental Psychology: Learning, Memory, and Cognition, 28", 411-421]. Familiarity arises…

  14. How working memory relates to children's reading comprehension: The importance of domain-specificity in storage and processing

    NARCIS (Netherlands)

    Nouwens, S.; Groen, M.A.; Verhoeven, L.T.W.

    2017-01-01

    Working memory is considered a well-established predictor of individual variation in reading comprehension in children and adults. However, how storage and processing capacities of working memory in both the phonological and semantic domain relate to reading comprehension is still unclear. In the

  15. Study of sugarcane pieces as yeast supports for ethanol production from sugarcane juice and molasses.

    Science.gov (United States)

    Liang, Lei; Zhang, Yuan-ping; Zhang, Li; Zhu, Ming-jun; Liang, Shi-zhong; Huang, Yu-nan

    2008-12-01

    Due to the environmental concerns and the increasing price of oil, bioethanol was already produced in large amount in Brazil and China from sugarcane juice and molasses. In order to make this process competitive, we have investigated the suitability of immobilized Saccharomyces cerevisiae strain AS2.1190 on sugarcane pieces for production of ethanol. Electron microscopy clearly showed that cell immobilization resulted in firm adsorption of the yeast cells within subsurface cavities, capillary flow through the vessels of the vascular bundle structure, and attachment of the yeast to the surface of the sugarcane pieces. Repeated batch fermentations using sugarcane supported-biocatalyst were successfully carried out for at least ten times without any significant loss in ethanol production from sugarcane juice and molasses. The number of cells attached to the support increased during the fermentation process, and fewer yeast cells leaked into fermentation broth. Ethanol concentrations (about 89.73-77.13 g/l in average value), and ethanol productivities (about 59.53-62.79 g/l d in average value) were high and stable, and residual sugar concentrations were low in all fermentations (0.34-3.60 g/l) with conversions ranging from 97.67-99.80%, showing efficiency (90.11-94.28%) and operational stability of the biocatalyst for ethanol fermentation. The results of this study concerning the use of sugarcane as yeast supports could be promising for industrial fermentations.

  16. Industrial Work, Instrumentalism, Learning Processes: An Old Debate in a Utopian Perspective

    DEFF Research Database (Denmark)

    Olsén, Peter; Nielsen, Kurt Aagaard; Nielsen, Birger Steen

    1993-01-01

    Research on unskilled industrial work suggests that workers' orientations to work are complex and ambivalent - implying defence mechanisms, resistance and (latent) interests in work and its change. This notion is discussed as a theoretical starting point for the project presented in the second pa...

  17. Influence of use of ultrasound on metallographic structure of plated pieces by welding in ultrasonic field

    Directory of Open Access Journals (Sweden)

    Gh. Amza

    2015-07-01

    Full Text Available To optimize the plating process is necessary to know the behavior of surfaces plated during the exploitation and in particular susceptibility to cracking, the formation of cracks from the inside to outside or reverse, embrittlement in the heat affected zone. Research has been realized considering several samples plated by welding without ultrasonic activation and with ultrasonic activation, and these samples were made of AISI 4130 steel, and as filler material was used Inconel 625 Fe developed as electrode wire ø 1,2 / mm. The plating process was realized by a WIG welding process in Ar100 /% environment with non-consumable tungsten electrode, in two versions, respectively with and without the use of ultrasonic energy. Four pieces played by welding there were analyzed the metallographies structure in the base material, the deposited material and the material from the heat affected zone.

  18. How wilderness therapy works: an examination of the wilderness therapy process to treat adolescents with behavioral problems and addictions

    Science.gov (United States)

    Keith C. Russell; John C. Hendee; Dianne Phillips-Miller

    2000-01-01

    This paper summarizes findings from a detailed study of the processes employed by four leading wilderness therapy programs focusing on how wilderness therapy works, the kinds of behavioral problems to which it is commonly applied, expected outcomes and the role of wilderness in the intervention and treatment process (Russell, 1999). Wilderness therapy is an emerging...

  19. Individual Differences in Working Memory, Nonverbal IQ, and Mathematics Achievement and Brain Mechanisms Associated with Symbolic and Nonsymbolic Number Processing

    Science.gov (United States)

    Gullick, Margaret M.; Sprute, Lisa A.; Temple, Elise

    2011-01-01

    Individual differences in mathematics performance may stem from domain-general factors like working memory and intelligence. Parietal and frontal brain areas have been implicated in number processing, but the influence of such cognitive factors on brain activity during mathematics processing is not known. The relationship between brain mechanisms…

  20. Water ice clouds on Mars: Exploring processes through modeling and laboratory work

    Science.gov (United States)

    Santiago-Materese, Delia Liza

    Water ice clouds on Mars are an important component of the hydrologic cycle as well as the overall climate system of the planet. The goal of this research is to better understand water ice cloud formation and behavior on Mars. We use modeling and laboratory experiments to explore different processes related to water ice cloud formation and evolution. The first goal of this work is to examine how well the Martian water cycle is simulated by the NASA Ames Mars General Circulation Model. The simulation predicts atmospheric water vapor amounts approximately half of those observed, globally. We identify water ice clouds as being a major contributor to this discrepancy. The model closely reproduces the convective aphelion cloud belt at the equator, but deviates substantially from observations over the North Polar Cap region. Modifying the nucleation scheme within the cloud microphysical model brings model results closer to observations and affects the surface radiative balance, which affects the annual cycle of sublimation and deposition of water ice at the residual North Polar Cap. The most realistic global water vapor and cloud patterns come from limiting the nucleation rate of particles at the poles. Our simulations show that the North Polar Cap region exhibits atmospheric dynamics where stratiform clouds form. We hypothesize that the modified nucleation scheme compensates for biases in the radiative properties of the stratiform clouds expected over the North Polar Cap. More broadly, this study illustrates the strong sensitivity of the Martian global water cycle to clouds over the North Polar Cap region. The second goal of this work is to assess the ability of various salts to serve as water ice cloud condensation nuclei under Martian conditions. We use a vacuum chamber to simulate the cold, lower pressure atmospheric conditions on Mars and find the critical saturation ratios at which the substrates nucleate water ice. We find no significant difference between sodium

  1. Archaeology of Chilean pre-hispanic pieces using induced x-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Morales, J.R.; Dinator, M.I. [Universidad de Chile, Facultad de Ciencias, Santiago (Chile); Tellez, F. [Universidad Catolica del Norte, I.I.A. San Pedro de Atacama (Chile)

    2001-09-01

    Full text: One of the most famous archaeological sites of Chile is San Pedro de Atacama in the north Andean highlands. The site, 68.23 W, 22.89 S, is close to the border lines with Argentina and Bolivia and was occupied by different cultures in the past like Atacameos and lately by Incas in s. X V. About a century later Hispanic explorers visited the zone. The area is rich in tombs and remains. Due to the abundance of minerals, metallurgy was practiced by pre-Hispanic cultures. This work is part of a study concerning the characterization of metallic artifacts found in several excavations. The elemental composition can help in determining the provenance of the pieces, and the metallurgical techniques used. A set of twenty pieces including hatchets, knifes, chisels, maces and bells were analyzed by X ray fluorescence induced by photons of 59.5 keV provided by a source of Am-241. Detection of Mn, Fe, Ni, Cu, As, Zr, Ag, Sn, Sb, Ba, and Pb has allowed determination of their provenance. (Author)

  2. Impact of Fruit Piece Structure in Yogurts on the Dynamics of Aroma Release and Sensory Perception

    Directory of Open Access Journals (Sweden)

    Isabelle Souchon

    2013-05-01

    Full Text Available The aim of this work was to gain insight into the effect of food formulation on aroma release and perception, both of which playing an important role in food appreciation. The quality and quantity of retronasal aroma released during food consumption affect the exposure time of olfactory receptors to aroma stimuli, which can influence nutritional and hedonic characteristics, as well as consumption behaviors. In yogurts, fruit preparation formulation can be a key factor to modulate aroma stimulation. In this context, the impact of size and hardness of fruit pieces in fat-free pear yogurts was studied. Proton Transfer Reaction-Mass Spectrometry (PTR-MS was used to allow sensitive and on-line monitoring of volatile odorous compound release in the breath during consumption. In parallel, a trained panel used sensory profile and Temporal Dominance of Sensations (TDS methods to characterize yogurt sensory properties and their dynamic changes during consumption. Results showed that the size of pear pieces had few effects on aroma release and perception of yogurts, whereas fruit hardness significantly influenced them. Despite the fact that yogurts presented short and similar residence times in the mouth, this study showed that fruit preparation could be an interesting formulation factor to enhance exposure time to stimuli and thus modify food consumption behaviors. These results could be taken into account to formulate new products that integrate both nutritional and sensory criteria.

  3. Modelling of the work processes high-pressure pump of common rail diesel injection system

    Directory of Open Access Journals (Sweden)

    Botwinska Katarzyna

    2016-01-01

    Full Text Available Common rail injection systems are becoming a more widely used solution in the fuel systems of modern diesel engines. The main component and the characteristic feature of the system is rail injection of the fuel under high pressure, which is passed to the injector and further to the combustion chamber. An important element in this process is the high-pressure pump, continuing adequate pressure in the rail injection system. Common rail (CR systems are being modified in order to optimise their work and virtual simulations are a useful tool in order to analyze the correctness of operation of the system while varying the parameters and settings, without any negative impact on the real object. In one particular study, a computer simulation of the pump high-pressure CR system was made in MatLab environment, based on the actual dimensions of the object – a one-cylinder diesel engine, the Farymann Diesel 18W. The resulting model consists of two parts – the first is responsible for simulating the operation of the high-pressure pump, and the second responsible for simulation of the remaining elements of the CR system. The results of this simulation produced waveforms of the following parameters: fluid flow from the manifold to the injector [m3/s], liquid flow from the manifold to the atmosphere [m3/s], and manifold pressure [Pa]. The simulation results allow for a positive verification of the model and the resulting system could become a useful element of simulation of the entire position and control algorithm.

  4. Intraocular lens capture in combined cataract extraction and pars plana vitrectomy: comparison of 1-piece and 3-piece acrylic intraocular lenses.

    Science.gov (United States)

    Rudnisky, Christopher J; Cheung, Joseph; Nanji, Jalal A

    2010-10-01

    To report and compare the incidence of pupillary capture and posterior synechiae formation after combined cataract extraction and pars plana vitrectomy (PPV) with a 1-piece versus a 3-piece acrylic intraocular lens (IOL). Royal Alexandra Hospital Eye Clinic, University of Alberta, Edmonton, Alberta, Canada. Comparative case series. Consecutive patients who had combined cataract extraction with PPV were retrospectively reviewed. The outcomes in patients who received a 1-piece acrylic IOL and those who received a 3-piece acrylic IOL were compared. The proportion of patients with pupillary IOL capture and/or posterior synechiae postoperatively was recorded. The cohort comprised 145 patients. All cases of IOL capture occurred in eyes with a 1-piece IOL (n = 7; 7.7%); the difference between the 1-piece IOL group and the 3-piece IOL group was statistically significant (P = .043). There was no significant difference between the 2 IOL types in the rate of posterior synechiae formation. Regression analysis showed that the odds of posterior synechiae formation were significantly higher in cases in which perfluoropropane (C(3)F(8)) (odds ratio [OR], 24.01; P = .006), sulfur hexafluoride (SF(6)) (OR, 25.23; P = .007), or silicone oil (OR, 47.78; Ppiece IOL than after implantation of a 3-piece IOL during combined cataract extraction and PPV. Posterior synechiae formation was associated with the use of silicone oil, SF(6), or C(3)F(8). Copyright © 2010 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  5. Automatic Music Boundary Detection Using Short Segmental Acoustic Similarity in a Music Piece

    Directory of Open Access Journals (Sweden)

    Yoshiaki Itoh

    2008-07-01

    Full Text Available The present paper proposes a new approach for detecting music boundaries, such as the boundary between music pieces or the boundary between a music piece and a speech section for automatic segmentation of musical video data and retrieval of a designated music piece. The proposed approach is able to capture each music piece using acoustic similarity defined for short-term segments in the music piece. The short segmental acoustic similarity is obtained by means of a new algorithm called segmental continuous dynamic programming, or segmental CDP. The location of each music piece and its music boundaries are then identified by referring to multiple similar segments and their location information, avoiding oversegmentation within a music piece. The performance of the proposed method is evaluated for music boundary detection using actual music datasets. The present paper demonstrates that the proposed method enables accurate detection of music boundaries for both the evaluation data and a real broadcasted music program.

  6. Automatic Music Boundary Detection Using Short Segmental Acoustic Similarity in a Music Piece

    Directory of Open Access Journals (Sweden)

    Tanaka Kazuyo

    2008-01-01

    Full Text Available The present paper proposes a new approach for detecting music boundaries, such as the boundary between music pieces or the boundary between a music piece and a speech section for automatic segmentation of musical video data and retrieval of a designated music piece. The proposed approach is able to capture each music piece using acoustic similarity defined for short-term segments in the music piece. The short segmental acoustic similarity is obtained by means of a new algorithm called segmental continuous dynamic programming, or segmental CDP. The location of each music piece and its music boundaries are then identified by referring to multiple similar segments and their location information, avoiding oversegmentation within a music piece. The performance of the proposed method is evaluated for music boundary detection using actual music datasets. The present paper demonstrates that the proposed method enables accurate detection of music boundaries for both the evaluation data and a real broadcasted music program.

  7. Structure and work process in primary care and hospitalizations for sensitive conditions.

    Science.gov (United States)

    Araujo, Waleska Regina Machado; Queiroz, Rejane Christine de Sousa; Rocha, Thiago Augusto Hernandes; Silva, Núbia Cristina da; Thumé, Elaine; Tomasi, Elaine; Facchini, Luiz Augusto; Thomaz, Erika Barbara Abreu Fonseca

    2017-08-17

    The objective of this study is to investigate whether the characteristics of the structure of primary health units and the work process of primary care teams are associated with the number of hospitalizations for primary care sensitive conditions. In this ecological study, we have analyzed data of Brazilian municipalities related to sociodemographic characteristics, coverage of care programs, structure of primary health units, and work process of primary care teams. We have obtained the data from the first cycle of the Brazilian Program for Improving Access and Quality of the Primary Care, of the Department of Information Technology of the Brazilian Unified Health System, the Brazilian Institute of Geography and Statistics, and the United Nations Development Programme. The associations have been estimated using negative binomial regression coefficients (β) and respective 95% confidence intervals, with a hierarchical approach in three levels (alpha = 5%). In the adjusted analysis for the outcome in 2013, in the distal level, the coverage of the Bolsa Família Program (β = -0.001) and private insurance (β = -0.01) had a negative association, and the human development index (β = 1.13), the proportion of older adults (β = 0.05) and children under the age of five (β = 0.05), and the coverage of the Community Health Agent Strategy (β = 0.002) showed positive association with hospitalizations for primary care sensitive conditions. In the intermediate level, minimum hours (β = -0.14) and availability of vaccines (β = -0.16) showed a negative association, and availability of medications showed a positive association (β = 0.16). In the proximal level, only the variable of matrix support (β = 0.10) showed a positive association. The variables in the adjusted analysis of the number of hospitalizations for primary care sensitive conditions in 2014 presented the same association as in 2013. The characteristics of the structure of primary health units and the work

  8. Cancer Survivors' Social Context in the Return to Work Process: Narrative Accounts of Social Support and Social Comparison Information.

    Science.gov (United States)

    Armaou, M; Schumacher, L; Grunfeld, E A

    2017-10-04

    Purpose Returning to work is a process that is intertwined with the social aspects of one's life, which can influence the way in which that person manages their return to work and also determines the support available to them. This study aimed to explore cancer patients' perceptions of the role of their social context in relation to returning to work following treatment. Methods Twenty-three patients who had received a diagnosis of either urological, breast, gynaecological, or bowel cancer participated in semi-structured interviews examining general perceptions of cancer, work values and perceptions of the potential impact of their cancer diagnosis and treatment on work. Interviews were analysed using the iterative process of Framework Analysis. Results Two superordinate themes emerged as influential in the return to work process: Social support as a facilitator of return to work (e.g. co-workers' support and support outside of the workplace) and Social comparison as an appraisal of readiness to return to work (e.g. comparisons with other cancer patients, colleagues, and employees in other organisations or professions). Conclusions Two functions of the social context of returning to work after cancer were apparent in the participants' narrative: the importance of social support as a facilitator of returning to work and the utilisation of social comparison information in order to appraise one's readiness to return to work. The role of social context in returning to work has largely been absent from the research literature to date. The findings of this study suggest that social support and social comparison mechanisms may have a significant impact on an individual's successful return to the workplace.

  9. The role of non-verbal working memory in morphosyntactic processing by school-aged monolingual and bilingual children

    Science.gov (United States)

    Gangopadhyay, Ishanti; Davidson, Meghan M.; Weismer, Susan Ellis; Kaushanskaya, Margarita

    2015-01-01

    The current study examined the relationship between non-verbal working memory and morphosyntactic processing in monolingual native speakers of English and bilingual speakers of English and Spanish. We tested 42 monolingual children and 42 bilingual children between the ages of 8 and 10, matched on age and non-verbal IQ. Children were administered an auditory Grammaticality Judgment task in English to measure morphosyntatic processing, and a visual N-Back task and a Corsi Blocks task to measure non-verbal working memory capacity. Analyses revealed that monolinguals were more sensitive to English morphosyntactic information than bilinguals, but the groups did not differ in reaction times or response bias. Furthermore, higher non-verbal working memory capacity was associated with greater sensitivity to morphosyntactic violations in bilinguals, but not in monolinguals. The findings suggest that non-verbal working memory skills link more tightly to syntactic processing in populations with lower levels of language knowledge. PMID:26550957

  10. The role of nonverbal working memory in morphosyntactic processing by school-aged monolingual and bilingual children.

    Science.gov (United States)

    Gangopadhyay, Ishanti; Davidson, Meghan M; Ellis Weismer, Susan; Kaushanskaya, Margarita

    2016-02-01

    The current study examined the relationship between nonverbal working memory and morphosyntactic processing in monolingual native speakers of English and bilingual speakers of English and Spanish. We tested 42 monolingual children and 42 bilingual children between the ages of 8 and 10years matched on age and nonverbal IQ. Children were administered an auditory Grammaticality Judgment task in English to measure morphosyntactic processing and a visual N-Back task and Corsi Blocks task to measure nonverbal working memory capacity. Analyses revealed that monolinguals were more sensitive to English morphosyntactic information than bilinguals, but the groups did not differ in reaction times or response bias. Furthermore, higher nonverbal working memory capacity was associated with greater sensitivity to morphosyntactic violations in bilinguals but not in monolinguals. The findings suggest that nonverbal working memory skills link more tightly to syntactic processing in populations with lower levels of language knowledge. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Dual N-Back Working Memory Training in Healthy Adults: A Randomized Comparison to Processing Speed Training.

    Science.gov (United States)

    Lawlor-Savage, Linette; Goghari, Vina M

    2016-01-01

    Enhancing cognitive ability is an attractive concept, particularly for middle-aged adults interested in maintaining cognitive functioning and preventing age-related declines. Computerized working memory training has been investigated as a safe method of cognitive enhancement in younger and older adults, although few studies have considered the potential impact of working memory training on middle-aged adults. This study investigated dual n-back working memory training in healthy adults aged 30-60. Fifty-seven adults completed measures of working memory, processing speed, and fluid intelligence before and after a 5-week web-based dual n-back or active control (processing speed) training program. Repeated measures multivariate analysis of variance failed to identify improvements across the three cognitive composites, working memory, processing speed, and fluid intelligence, after training. Follow-up Bayesian analyses supported null findings for training effects for each individual composite. Findings suggest that dual n-back working memory training may not benefit working memory or fluid intelligence in healthy adults. Further investigation is necessary to clarify if other forms of working memory training may be beneficial, and what factors impact training-related benefits, should they occur, in this population.

  12. Dual N-Back Working Memory Training in Healthy Adults: A Randomized Comparison to Processing Speed Training

    Science.gov (United States)

    Lawlor-Savage, Linette; Goghari, Vina M.

    2016-01-01

    Enhancing cognitive ability is an attractive concept, particularly for middle-aged adults interested in maintaining cognitive functioning and preventing age-related declines. Computerized working memory training has been investigated as a safe method of cognitive enhancement in younger and older adults, although few studies have considered the potential impact of working memory training on middle-aged adults. This study investigated dual n-back working memory training in healthy adults aged 30–60. Fifty-seven adults completed measures of working memory, processing speed, and fluid intelligence before and after a 5-week web-based dual n-back or active control (processing speed) training program. Results: Repeated measures multivariate analysis of variance failed to identify improvements across the three cognitive composites, working memory, processing speed, and fluid intelligence, after training. Follow-up Bayesian analyses supported null findings for training effects for each individual composite. Findings suggest that dual n-back working memory training may not benefit working memory or fluid intelligence in healthy adults. Further investigation is necessary to clarify if other forms of working memory training may be beneficial, and what factors impact training-related benefits, should they occur, in this population. PMID:27043141

  13. Pieced Together: Collage as an Artist's Method for Interdisciplinary Research

    Directory of Open Access Journals (Sweden)

    Kathleen Vaughan

    2005-03-01

    Full Text Available As a visual artist undertaking doctoral studies in education, the author required a research method that integrated her studio practice into her research process, giving equal weight to the visual and the linguistic. Her process of finding such a method is outlined in this article, which touches on arts-based research and practice-led research, and her ultimate approach of choice, collage. Collage, a versatile art form that accommodates multiple texts and visuals in a single work, has been proposed as a model for a “borderlands epistemology”: one that values multiple distinctive understandings and that deliberately incorporates nondominant modes of knowing, such as visual arts. As such, collage is particularly suited to a feminist, postmodern, postcolonial inquiry. This article offers a preliminary theorizing of collage as a method and is illustrated with images from the author's research/visual practice.

  14. Shift work and the risk of cardiovascular disease among workers in cocoa processing company, Tema

    OpenAIRE

    Asare-Anane, Henry; Abdul-Latif, Adams; Ofori, Emmanuel Kwaku; Abdul-Rahman, Mubarak; Seth D. Amanquah

    2015-01-01

    Objective Shift work has been implicated in cardiovascular disease (CVD), a major cause of death globally. The aim of this study was to evaluate the risk of developing CVD in shift work. Design A cross-sectional study involving secondary analysis of shift and non-shift work from an industry in Ghana. Participants Two hundred (113 shift and 87 non-shift) consecutive workers who consented were recruited into the study. A structured questionnaire was administered to deduce information on partici...

  15. Pathology of 219 human cadaver eyes with 1-piece or 3-piece hydrophobic acrylic intraocular lenses: capsular bag opacification and sites of square-edged barrier breach.

    Science.gov (United States)

    Ness, Peter J; Werner, Liliana; Maddula, Surekha; Davis, Don; Zaugg, Brian; Stringham, Jack; Burrow, Michael; Yeh, Oliver

    2011-05-01

    To assess capsular bag opacification and sites of initial posterior capsule opacification (PCO) in human cadaver eyes with square-edged 1-piece or 3-piece hydrophobic acrylic intraocular lenses (IOLs). John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA. Experimental study. Eyes were immersed in 10% formalin after enucleation and had anterior segment scanning with very-high-frequency ultrasound (Artemis). After the eyes were sectioned at the equator, gross examination of the anterior segment was performed from the posterior aspect to assess capsular bag opacification, anterior capsule coverage of the IOL edge, and IOL fixation. Selected eyes had histopathologic examination. One hundred nineteen eyes with 1-piece IOLs and 100 with 3-piece IOLs were included in the analyses of capsular bag opacification. There was no difference in central (P=.29) or peripheral (P=.76) PCO. In 63 of 84 eyes with a 1-piece IOL and peripheral PCO, the optic-haptic junction was the site of initiation. In eyes with a 3-piece IOL, initial peripheral PCO was observed at nearly the same rate whether there was full 360-degree anterior capsulorhexis overlap of the optic or no overlap (P=.13). In the latter, the site of PCO initiation was in areas lacking capsulorhexis coverage in 46% of eyes. There was no difference in central or peripheral PCO between 1-piece and 3-piece hydrophobic acrylic IOLs. With 1-piece IOLs, PCO tended to start at the optic-haptic junctions. With 3-piece IOLs, full anterior capsule coverage did not produce a statistically significant benefit with respect to PCO prevention. Copyright © 2011 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  16. Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

    Science.gov (United States)

    Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

    2012-01-01

    Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

  17. One Piece Orbitozygomatic Approach Based on the Sphenoid Ridge Keyhole

    DEFF Research Database (Denmark)

    Spiriev, Toma; Poulsgaard, Lars; Fugleholm, Kåre

    2016-01-01

    ridge. It was located 22 mm (standard deviation [SD], 0.22 mm) from the superior temporal line; 10.7 mm (SD, 0.08 mm) posterior and 7.1 mm (SD, 0.22 mm) inferior to the frontozygomatic suture. The sphenoid ridge burr hole provides exposure of frontal, temporal dura as well as periorbita, which...... was examined on 20 anatomical dry skull specimens. The results were applied to one-piece OZ approaches performed on freshly frozen cadaver heads. We defined the center of the sphenoid ridge keyhole as a superficial projection on the lateral skull surface of the most anterior and thickest part of the sphenoid...... the usual placement of the McCarty keyhole, with comparative exposure....

  18. Effectiveness of one-piece implants inserted in cuspid sites.

    Science.gov (United States)

    Carinci, Francesco

    2012-12-01

    One-piece implants (OPIs) incorporate the trans-mucosal abutment facing the soft tissues as an integral part of the implant. OPIs are usually welded together and loaded immediately. Since no report focuses specifically on OPIs inserted in cuspid sites, a retrospective study is performed. Nineteen patients (10 females and 9 males) with a median age of 62 years (range, 43-80) were admitted at the Dental Clinic, University of Chieti (Italy), for evaluation and implant treatment, by one surgeon between January and December 2010. In our series, the survival rate (SVR) and success rate (SCR) were 96.8% and 100%, respectively. Statistical analysis demonstrated that no studied variable had an impact on the survival (i.e., lost implants) and clinical success (i.e., crestal bone resorption). OPIs are reliable devices for oral rehabilitation in the cuspid sites.

  19. The RNA silencing pathway: the bits and pieces that matter.

    Directory of Open Access Journals (Sweden)

    Marian A C Groenenboom

    2005-07-01

    Full Text Available Cellular pathways are generally proposed on the basis of available experimental knowledge. The proposed pathways, however, may be inadequate to describe the phenomena they are supposed to explain. For instance, by means of concise mathematical models we are able to reveal shortcomings in the current description of the pathway of RNA silencing. The silencing pathway operates by cleaving siRNAs from dsRNA. siRNAs can associate with RISC, leading to the degradation of the target mRNA. We propose and analyze a few small extensions to the pathway: a siRNA degrading RNase, primed amplification of aberrant RNA pieces, and cooperation between aberrant RNA to trigger amplification. These extensions allow for a consistent explanation for various types of silencing phenomena, such as virus induced silencing, transgene and transposon induced silencing, and avoidance of self-reactivity, as well as for differences found between species groups.

  20. On the dynamics of the three-piece-freight truck

    DEFF Research Database (Denmark)

    Xia, Fujie; True, Hans

    2003-01-01

    Although the three-piece-freight truck is a simple design its mathematical model is very complicated. The model is definitely a nonlinear dynamical system, where the nonlinearities arise from the nonlinear kinematic and dynamical contact relations between wheels and rails, the suspensions...... and the nonlinear dry friction damping with hysteresis and stick-slip action. The bolster moves both vertically and laterally relative to the truck frames, so the friction forces on the contact surfaces of the wedges must be treated as two-dimensional vectors, and the same holds for the dry friction on the surfaces...... of the adapters. Due to the clearances between the car body and the side supports on the bolster, the side supports must be modelled as nonlinear dead-band springs. The stick-slip action and the play between elements of the truck makes the dynamical model a structure varying system. We present the dynamical...

  1. How the Food Processing Industry Is Diversifying Rural Minnesota. JSRI Working Paper.

    Science.gov (United States)

    Fennelly, Katherine; Leitner, Helga

    The diversification of rural Minnesota is largely the result of the restructuring of the food processing industry and its recruitment of low-wage laborers. The relocation and expansion of food processing plants into rural areas of Minnesota creates a demand for low-wage labor that can not be met locally. Food processing businesses attract…

  2. Web 2.0 and communication processes at work : Evidence from China

    NARCIS (Netherlands)

    Wong, L.H.M.; Ou, Carol; Davison, R.M.; Zhu, H.; Zhang, C.

    Research problem: Web 2.0 applications, such as instant messengers and other social media platforms, are fast becoming ubiquitous in organizations, yet their impact on work performance is poorly understood. Research question: What is the relationship between Web 2.0 use, and work-based communication

  3. The Process of Designing for Learning: Understanding University Teachers' Design Work

    Science.gov (United States)

    Bennett, Sue; Agostinho, Shirley; Lockyer, Lori

    2017-01-01

    Interest in how to support the design work of university teachers has led to research and development initiatives that include technology-based design-support tools, online repositories, and technical specifications. Despite these initiatives, remarkably little is known about the design work that university teachers actually do. This paper…

  4. Group process-work outcome relationships: a note on the moderating impact of self-esteem.

    Science.gov (United States)

    Mossholder, K W; Bedeian, A G; Armenakis, A A

    1982-09-01

    Self-esteem was hypothesized to moderate relationships between peer group interaction and two work-related variables, job performance and job strain. The study found support for the general hypothesis. Peer group interaction had a greater impact on the two work-related variables for low than for high self-esteem individuals.

  5. The role of executive processes in working memory deficits in Parkinson’s Disease

    Directory of Open Access Journals (Sweden)

    Gruszka Aleksandra

    2016-04-01

    Full Text Available Idiopathic Parkinson’s disease (PD impairs working memory, but the exact nature of this deficit in terms of the underlying cognitive mechanisms is not well understood. In this study patients with mild clinical symptoms of PD were compared with matched healthy control subjects on a computerized battery of tests designed to assess spatial working memory and verbal working memory. In the spatial working memory task, subjects were required to recall a sequence of four locations. The verbal working memory task was methodologically identical except for the modality of the stimuli used, requiring subjects to orally recall a sequence of six digits. In either case, half of the sequences were structured in a way that allowed ‘chunking’, while others were unstructured. This manipulation was designed to dissociate the strategic component of task performance from the memory-load component. Mild medicated patients with PD were impaired only on the structured versions of the verbal working memory tasks. The analogous deficit in the spatial working memory was less pronounced. These findings are in agreement with the hypothesis that working memory deficits in PD reflect mainly the executive component of the tasks and that the deficits may be at least partly modality-independent.

  6. Information Fields Navigation with Piece-Wise Polynomial Approximation for High-Performance OFDM in WSNs

    Directory of Open Access Journals (Sweden)

    Wei Wei

    2013-01-01

    Full Text Available Since Wireless sensor networks (WSNs are dramatically being arranged in mission-critical applications,it changes into necessary that we consider application requirements in Internet of Things. We try to use WSNs to assist information query and navigation within a practical parking spaces environment. Integrated with high-performance OFDM by piece-wise polynomial approximation, we present a new method that is based on a diffusion equation and a position equation to accomplish the navigation process conveniently and efficiently. From the point of view of theoretical analysis, our jobs hold the lower constraint condition and several inappropriate navigation can be amended. Information diffusion and potential field are introduced to reach the goal of accurate navigation and gradient descent method is applied in the algorithm. Formula derivations and simulations manifest that the method facilitates the solution of typical sensor network configuration information navigation. Concurrently, we also treat channel estimation and ICI mitigation for very high mobility OFDM systems, and the communication is between a BS and mobile target at a terrible scenario. The scheme proposed here combines the piece-wise polynomial expansion to approximate timevariations of multipath channels. Two near symbols are applied to estimate the first-and second-order parameters. So as to improve the estimation accuracy and mitigate the ICI caused by pilot-aided estimation, the multipath channel parameters were reestimated in timedomain employing the decided OFDM symbol. Simulation results show that this method would improve system performance in a complex environment.

  7. Hormonal modulation of novelty processing in women: Enhanced under working memory load with high dehydroepiandrosterone-sulfate-to-dehydroepiandrosterone ratios.

    Science.gov (United States)

    do Vale, Sónia; Selinger, Lenka; Martins, João Martin; Bicho, Manuel; do Carmo, Isabel; Escera, Carles

    2016-11-10

    Several studies have suggested that dehydroepiandrosterone (DHEA) and dehydroepiandrosterone-sulfate (DHEAS) may enhance working memory and attention, yet current evidence is still inconclusive. The balance between both forms of the hormone might be crucial regarding the effects that DHEA and DHEAS exert on the central nervous system. To test the hypothesis that higher DHEAS-to-DHEA ratios might enhance working memory and/or involuntary attention, we studied the DHEAS-to-DHEA ratio in relation to involuntary attention and working memory processing by recording the electroencephalogram of 22 young women while performing a working memory load task and a task without working memory load in an audio-visual oddball paradigm. DHEA and DHEAS were measured in saliva before each task. We found that a higher DHEAS-to-DHEA ratio was related to enhanced auditory novelty-P3 amplitudes during performance of the working memory task, indicating an increased processing of the distracter, while on the other hand there was no difference in the processing of the visual target. These results suggest that the balance between DHEAS and DHEA levels modulates involuntary attention during the performance of a task with cognitive load without interfering with the processing of the task-relevant visual stimulus. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  8. How high-performance work systems drive health care value: an examination of leading process improvement strategies.

    Science.gov (United States)

    Robbins, Julie; Garman, Andrew N; Song, Paula H; McAlearney, Ann Scheck

    2012-01-01

    As hospitals focus on increasing health care value, process improvement strategies have proliferated, seemingly faster than the evidence base supporting them. Yet, most process improvement strategies are associated with work practices for which solid evidence does exist. Evaluating improvement strategies in the context of evidence-based work practices can provide guidance about which strategies would work best for a given health care organization. We combined a literature review with analysis of key informant interview data collected from 5 case studies of high-performance work practices (HPWPs) in health care organizations. We explored the link between an evidence-based framework for HPWP use and 3 process improvement strategies: Hardwiring Excellence, Lean/Six Sigma, and Baldrige. We found that each of these process improvement strategies has not only strengths but also important gaps with respect to incorporating HPWPs involving engaging staff, aligning leaders, acquiring and developing talent, and empowering the front line. Given differences among these strategies, our analyses suggest that some may work better than others for individual health care organizations, depending on the organizations' current management systems. In practice, most organizations implementing improvement strategies would benefit from including evidence-based HPWPs to maximize the potential for process improvement strategies to increase value in health care.

  9. Utility of a Work Process Classification System for characterizing non-fatal injuries in the Alaskan commercial fishing industry

    Directory of Open Access Journals (Sweden)

    Laura N. Syron

    2016-01-01

    Full Text Available Background: The US commercial fishing industry is hazardous, as measured by mortality data. However, research on non-fatal injuries is limited. Non-fatal injuries constitute the majority of occupational injuries and can result in workers’ lowered productivity and wages, lost quality of life, and disability. In the United States, a Work Process Classification System (WPCS has previously been applied in Alaskan freezer-trawl and freezer-longline fleets to identify causes of injuries and specific hazards, but not to other fishing fleets. Objectives: This descriptive epidemiologic study aimed to explore the application and modification of the WPCS in multiple Alaskan fleets, characterize non-fatal occupational injuries in these fleets, and identify work processes that could be targeted for further investigation and future injury prevention efforts. Design: Traumatic, non-fatal injuries on-board Alaskan commercial fishing vessels were identified through United States Coast Guard investigative reports. Characteristics of injuries, as well as worker characteristics, were analysed. Injuries were coded using the WPCS. Results: We successfully utilized the WPCS to code non-fatal injury cases (n = 136. The most frequent main work processes associated with non-fatal injuries included: on-board trawlers, handling frozen fish and processing the catch; on-board vessels using pot/trap gear, handling the gear and shooting/setting the gear; on-board longliners, traffic on board and hauling the gear; and on-board processor vessels, processing the catch, other work with the catch, and handling frozen fish. Conclusions: The study confirmed that a WPCS can be applied to multiple Alaskan fleets to identify hazardous tasks. Hazards were unique for each vessel gear type. Future injury prevention efforts should target work processes associated with the most frequent and most severe injuries. Future studies should establish time estimates for work processes in order to

  10. The use of drugs in the educational work process in the child education.

    Directory of Open Access Journals (Sweden)

    Janaina Barela Meireles

    2016-03-01

    Full Text Available This text discusses the use of medications in the routine of work of the teachers and auxiliaries who work in the Municipal Schools of Early Childhood Education of 16 cities of Rio Grande do Sul. This usage is related to the high requirements and numberless demands that are imposed on these professionals that end up resorting to the use of drugs in the search for a rebalancing and a readaptation to stay in a welfare level in their profession. The data were obtained through the application of two instruments: the Questionnaire about Work's Content and Complementary Questionnaire.

  11. Visual encoding impairment in patients with schizophrenia: contribution of reduced working memory span, decreased processing speed, and affective symptoms.

    Science.gov (United States)

    Brébion, Gildas; Stephan-Otto, Christian; Huerta-Ramos, Elena; Ochoa, Susana; Usall, Judith; Abellán-Vega, Helena; Roca, Mercedes; Haro, Josep Maria

    2015-01-01

    Previous research has revealed the contribution of decreased processing speed and reduced working memory span in verbal and visual memory impairment in patients with schizophrenia. The role of affective symptoms in verbal memory has also emerged in a few studies. The authors designed a picture recognition task to investigate the impact of these factors on visual encoding. Two types of pictures (black and white vs. colored) were presented under 2 different conditions of context encoding (either displayed at a specific location or in association with another visual stimulus). It was assumed that the process of encoding associated pictures was more effortful than that of encoding pictures that were presented alone. Working memory span and processing speed were assessed. In the patient group, working memory span was significantly associated with the recognition of the associated pictures but not significantly with that of the other pictures. Controlling for processing speed eliminated the patients' deficit in the recognition of the colored pictures and greatly reduced their deficit in the recognition of the black-and-white pictures. The recognition of the black-and-white pictures was inversely related to anxiety in men and to depression in women. Working memory span constrains the effortful visual encoding processes in patients, whereas processing speed decrement accounts for most of their visual encoding deficit. Affective symptoms also have an impact on visual encoding, albeit differently in men and women. PsycINFO Database Record (c) 2015 APA, all rights reserved.

  12. Quality Improvement of Ground Works Process with the Use of Chosen Lean Management Tools – Case Study

    Science.gov (United States)

    Nowotarski, Piotr; Paslawski, Jerzy; Wysocki, Bartosz

    2017-12-01

    Ground works are one of the first processes connected with erecting structures. Based on ground conditions like the type of soil or level of underground water different types and solutions for foundations are designed. Foundations are the base for the buildings, and their proper design and execution is the key for the long and faultless use of the whole construction and might influence on the future costs of the eventual repairs (especially when ground water level is high, and there is no proper water insulation made). Article presents the introduction of chosen Lean Management tools for quality improvement of the process of ground works based on the analysis made on the construction site of vehicle control station located in Poznan, Poland. Processes assessment is made from different perspectives taking into account that 3 main groups of workers were directly involved in the process: blue collar-workers, site manager and site engineers. What is more comparison is made on the 3 points of view to the problems that might occur during this type of works, with details analysis on the causes of such situation? Authors presents also the change of approach of workers directly involved in the mentioned processes regarding introduction of Lean Management methodology, which illustrates the problem of scepticism for new ideas of the people used to perform works and actions in traditional way. Using Lean Management philosophy in construction is a good idea to streamline processes in company, get rid of constantly recurring problems, and in this way improve the productivity and quality of executed activities. Performed analysis showed that different groups of people have very different idea and opinion on the problems connected with executing the same process – ground works and only having full picture of the situation (especially in construction processes) management can take proper problems-preventing actions that consequently can influence on the amount of waste generated

  13. Behavior of cold-worked AISI-304 steel in stress-corrosion cracking process: Microstructural aspects

    Science.gov (United States)

    Zeman, A.; Novotny, R.; Uca, O.; Krsjak, V.; Macak, J.; Debarberis, L.

    2008-10-01

    Austenitic stainless steel is one of the key structural materials for a wide-range of components for present nuclear power plants. Moreover, this type of steel is also foreseen as a key structural material in future reactor systems, the so-called Generation IV. However, for the successful application of these materials in new environmental conditions an integrated Research and Development program needs to be successfully completed. This work is focused to the evaluation of cold-worked AISI-304 stainless steel from 20 to 45% of cold-worked deformation by different spectroscopic techniques within the aim to study the microstructural characteristics. In particular, positron annihilation spectroscopy and small angle neutron scattering have been used for characterization of phase transformation and microstructural behavior. Furthermore, outcomes of corrosion properties of cold-worked AISI-304 stainless steel exposed for 100 and 500 h in super-critical water reactor conditions are correlated with the obtained results.

  14. High Work Output Ni-Ti-Pt High Temperature Shape Memory Alloys and Associated Processing Methods

    Science.gov (United States)

    Noebe, Ronald D. (Inventor); Draper, Susan L. (Inventor); Nathal, Michael V. (Inventor); Garg, Anita (Inventor)

    2009-01-01

    According to the invention, compositions of Ni-Ti-Pt high temperature, high force, shape memory alloys are disclosed that have transition temperatures above 100 C.; have narrow hysteresis; and produce a high specific work output.

  15. Visuo-spatial processing in a dynamic and a static working memory paradigm in schizophrenia

    DEFF Research Database (Denmark)

    Cocchi, Luca; Schenk, Françoise; Volken, Henri

    2007-01-01

    patients with schizophrenia and matched controls in a new working memory paradigm involving dynamic (the Ball Flight Task - BFT) or static (the Static Pattern Task - SPT) visual stimuli. In the BFT, the responses of the patients were apparently based on the retention of the last set of segments...... that visuo-spatial working memory can simply be dissociated into visual and spatial sub-components....

  16. Teacher performance and work environment in the instructional process in vocational school

    Science.gov (United States)

    Kuncoro, Tri; Dardiri, Ahmad

    2017-09-01

    Teachers should have pedagogical, personality, social, and professional competency. stated that performance appraisal has several benefits, namely for the implementation of reward and punishment system, provision of feedback for teachers to develop their competencies, identification of training needs, and diagnosis of problems. According to performance is one's work result or success rate as a whole over a certain period of time in performing tasks compared to various possibilities, such as work standards, targets or criteria which have been predetermined and agreed. One's performance is based on daily tasks and responsibilities assigned to him/her. The racial differences in personality are largely due to different environmental influences, where people of different races have progressed for generations. Vocational high school teachers have a low pedagogic and professional performance. The factors that influence performance, according to the partner-lawyer model proposed, are expectations about rewards, encouragements, abilities, needs and traits, perceptions of tasks, internal and external rewards, perceptions of reward levels and job satisfaction. This study used a survey method to collect data or information about a large population using relatively small samples. The population of this research was vocational high school teachers. Data analysis techniques used the Regression Analysis with the assistance of SPSS. The results of teacher performance are as follows: 1) the pedagogic performance was relatively good; 2) professional performance was relatively good, and the overall performance of vocational high school teachers was still less effective and efficient; 3) the teachers' work environment was 42.5234%; and 4) there was no correlation between work environment and teacher performance, meaning that the work environment (conditions of physical work environment, psychological work environment, and non-physical work environment) does not positively support the

  17. Working with the ineffable: Toward a process of understanding and communicating qualitative research knowledge and experience through design

    DEFF Research Database (Denmark)

    Coxon, Ian Robert

    2013-01-01

    The work described in this paper addresses the conference call for "New processes, tools or approaches that facilitate knowledge exchange and collaboration" between academia and creative people. It introduces a research-for-design program that we at the Experience-based Designing Centre in Denmark...... have been working on and with for the past year. It will present a program of teaching, research and industry collaboration that is essentially a knowledge gathering and information exchange program that is in itself a work-in-progress. We refer to this work as the four pillars of Experience......-based Designing (XbD). The discussion will centre on XbD as we currently practice it with a view to exploring new opportunities for improvement within the whole Experience-based Designing process. The four pillars involving Exploring, Understanding, Sharing and Showing How are staging points for the input of new...

  18. Circumstances, experiences and processes surrounding women's entry into sex work in India.

    Science.gov (United States)

    McClarty, Leigh M; Bhattacharjee, Parinita; Blanchard, James F; Lorway, Robert R; Ramanaik, Satyanarayana; Mishra, Sharmistha; Isac, Shajy; Ramesh, B M; Washington, Reynold; Moses, Stephen; Becker, Marissa L

    2014-01-01

    Evidence suggests that in India, the early stages of a woman's career as a sex worker may be an important period to target for HIV and sexually transmitted infection prevention. Before such an intervention is designed and implemented, it is necessary to first understand the life circumstances of women at the start of their sex work careers. We performed a review to bring together available literature pertaining to entry into sex work in India and to highlight knowledge gaps. We found that historical traditions of dedication into sex work, financial insecurity, family discord, violence and coercion, and desire for financial independence are commonly reported reasons for entering into sex work. We also found that families and the broader sex worker community play an important role in the early stages of a woman's sex work career. We suggest that HIV-prevention programmes in India would substantially benefit from a deeper understanding of the life circumstances of new and young women sex workers. Further research should be conducted focusing on family and community involvement in women's entry into sex work, and on the important period of time after a woman's first commercial sex encounter, but before self-identification as a sex worker.

  19. Findings of a Four-Year Randomized Controlled Clinical Trial Comparing Two-Piece and One-Piece Zirconia Abutments Supporting Single Prosthetic Restorations in Maxillary Anterior Region

    Directory of Open Access Journals (Sweden)

    Guerino Paolantoni

    2016-01-01

    Full Text Available The purpose of this randomized controlled study is to investigate the clinical results obtained over four years and incidence of complications associated with one- versus two-piece custom made zirconia anchorages, in single tooth implant-supported restorations of the maxillary anterior region. Sixty-five patients, with a total of 74 missing maxillary teeth, were selected in the period from February 2007 to July 2010. Two different ways of custom made zirconia abutment and final prosthetic restoration were evaluated: a standard zirconia abutment associated with a pressed layer of lithium disilicate with an all-ceramic cemented restoration versus one-piece restoration with the facing porcelain fired and pressed straight to the custom made zirconia abutment. In 29 cases, the restoration consisted of an all-ceramic restoration for cementation (two pieces; in 45 cases the restoration was a screw-retained restoration (one piece. Three all-ceramic restorations broke during the observation time. Two one-piece restorations fractured after 26 months. At follow-up examination there were no significant differences between one-piece and two-piece groups regarding the PI, BI, and MBL. Awaiting studies with longer follow-up times, a careful conclusion is that zirconia anchorages for single-implant restorations seem to demonstrate good short-term technical and biological results.

  20. Findings of a Four-Year Randomized Controlled Clinical Trial Comparing Two-Piece and One-Piece Zirconia Abutments Supporting Single Prosthetic Restorations in Maxillary Anterior Region.

    Science.gov (United States)

    Paolantoni, Guerino; Marenzi, Gaetano; Blasi, Andrea; Mignogna, Jolanda; Sammartino, Gilberto

    2016-01-01

    The purpose of this randomized controlled study is to investigate the clinical results obtained over four years and incidence of complications associated with one- versus two-piece custom made zirconia anchorages, in single tooth implant-supported restorations of the maxillary anterior region. Sixty-five patients, with a total of 74 missing maxillary teeth, were selected in the period from February 2007 to July 2010. Two different ways of custom made zirconia abutment and final prosthetic restoration were evaluated: a standard zirconia abutment associated with a pressed layer of lithium disilicate with an all-ceramic cemented restoration versus one-piece restoration with the facing porcelain fired and pressed straight to the custom made zirconia abutment. In 29 cases, the restoration consisted of an all-ceramic restoration for cementation (two pieces); in 45 cases the restoration was a screw-retained restoration (one piece). Three all-ceramic restorations broke during the observation time. Two one-piece restorations fractured after 26 months. At follow-up examination there were no significant differences between one-piece and two-piece groups regarding the PI, BI, and MBL. Awaiting studies with longer follow-up times, a careful conclusion is that zirconia anchorages for single-implant restorations seem to demonstrate good short-term technical and biological results.

  1. Findings of a Four-Year Randomized Controlled Clinical Trial Comparing Two-Piece and One-Piece Zirconia Abutments Supporting Single Prosthetic Restorations in Maxillary Anterior Region

    Science.gov (United States)

    Paolantoni, Guerino; Marenzi, Gaetano; Blasi, Andrea; Mignogna, Jolanda; Sammartino, Gilberto

    2016-01-01

    The purpose of this randomized controlled study is to investigate the clinical results obtained over four years and incidence of complications associated with one- versus two-piece custom made zirconia anchorages, in single tooth implant-supported restorations of the maxillary anterior region. Sixty-five patients, with a total of 74 missing maxillary teeth, were selected in the period from February 2007 to July 2010. Two different ways of custom made zirconia abutment and final prosthetic restoration were evaluated: a standard zirconia abutment associated with a pressed layer of lithium disilicate with an all-ceramic cemented restoration versus one-piece restoration with the facing porcelain fired and pressed straight to the custom made zirconia abutment. In 29 cases, the restoration consisted of an all-ceramic restoration for cementation (two pieces); in 45 cases the restoration was a screw-retained restoration (one piece). Three all-ceramic restorations broke during the observation time. Two one-piece restorations fractured after 26 months. At follow-up examination there were no significant differences between one-piece and two-piece groups regarding the PI, BI, and MBL. Awaiting studies with longer follow-up times, a careful conclusion is that zirconia anchorages for single-implant restorations seem to demonstrate good short-term technical and biological results. PMID:27027093

  2. Liar, liar, working memory on fire: Investigating the role of working memory in childhood verbal deception.

    Science.gov (United States)

    Alloway, Tracy Packiam; McCallum, Fiona; Alloway, Ross G; Hoicka, Elena

    2015-09-01

    The aim of the current study was to investigate the role of working memory in verbal deception in children. We presented 6- and 7-year-olds with a temptation resistance paradigm; they played a trivia game and were then given an opportunity to peek at the final answers on the back of a card. Measures of both verbal and visuospatial working memory were included. The good liars performed better on the verbal working memory test in both processing and recall compared with the bad liars. However, there was no difference in visuospatial working scores between good liars and bad liars. This pattern suggests that verbal working memory plays a role in processing and manipulating the multiple pieces of information involved in lie-telling. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. UTILIZATION OF STEREOLOGY FOR QUANTITATIVE ANALYSIS OF PLASTIC DEFORMATION OF FORMING PIECES

    Directory of Open Access Journals (Sweden)

    Maroš Martinkovič

    2012-01-01

    Full Text Available Mechanical working leads to final properties of forming pieces, which are affected by conditions of production technology. Utilization of stereology leads to the detail analysis of three-dimensional plastic deformed material structure by different forming technologies, e.g. forging, extruding, upsetting, metal spinning, drawing etc. The microstructure of cold drawing wires was analyzed. Grain boundaries orientation was measured on the parallel section of wire with a different degree of deformation and direct axis plastic deformation was evaluated in bulk formed part. The strain of probes on their sections was obtained using stereology by measurement of degree of grain boundary orientation which was converted to deformation using model of conversion of grain boundary orientation degree to deformation.

  4. Development of a net shape manufacturing method for ventilated brake discs in single piece design

    Energy Technology Data Exchange (ETDEWEB)

    Zuber, Ch.; Heidenreich, B. [German Aerospace Center (DLR) Institute of Structures and Design, Pfaffenwaldring 38-40, 70569, Stuttgart (Germany)

    2006-04-15

    Carbon fibre reinforced ceramic matrix composites (CMC), originally developed for lightweight heat shields of spacecraft, are used for high performance brake discs in sports cars from different manufacturers. In contrast to the CMC materials for space applications, based on woven fabrics and costly manufacturing methods, these low cost friction materials are produced by liquid silicon infiltration of porous Carbon/Carbon (C/C) preforms, based on short fibre reinforced CFRP green bodies manufactured via warm press technique. In this work, different manufacturing methods for ventilated CMC brake discs are compared to each other, and the development of a new technology for the manufacture of single piece C/C-SiC brake discs in net shape technique is presented. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  5. Visual-spatial processing and working-memory load as a function of negative and positive psychotic-like experiences.

    Science.gov (United States)

    Abu-Akel, A; Reniers, R L E P; Wood, S J

    2016-09-01

    Patients with schizophrenia show impairments in working-memory and visual-spatial processing, but little is known about the dynamic interplay between the two. To provide insight into this important question, we examined the effect of positive and negative symptom expressions in healthy adults on perceptual processing while concurrently performing a working-memory task that requires the allocations of various degrees of cognitive resources. The effect of positive and negative symptom expressions in healthy adults (N = 91) on perceptual processing was examined in a dual-task paradigm of visual-spatial working memory (VSWM) under three conditions of cognitive load: a baseline condition (with no concurrent working-memory demand), a low VSWM load condition, and a high VSWM load condition. Participants overall performed more efficiently (i.e., faster) with increasing cognitive load. This facilitation in performance was unrelated to symptom expressions. However, participants with high-negative, low-positive symptom expressions were less accurate in the low VSWM condition compared to the baseline and the high VSWM load conditions. Attenuated, subclinical expressions of psychosis affect cognitive performance that is impaired in schizophrenia. The "resource limitations hypothesis" may explain the performance of the participants with high-negative symptom expressions. The dual-task of visual-spatial processing and working memory may be beneficial to assessing the cognitive phenotype of individuals with high risk for schizophrenia spectrum disorders.

  6. Inattentive Behavior in Boys with ADHD during Classroom Instruction: the Mediating Role of Working Memory Processes.

    Science.gov (United States)

    Orban, Sarah A; Rapport, Mark D; Friedman, Lauren M; Eckrich, Samuel J; Kofler, Michael J

    2017-08-19

    Children with ADHD exhibit clinically impairing inattentive behavior during classroom instruction and in other cognitively demanding contexts. However, there have been surprisingly few attempts to validate anecdotal parent/teacher reports of intact sustained attention during 'preferred' activities such as watching movies. The current investigation addresses this omission, and provides an initial test of how ADHD-related working memory deficits contribute to inattentive behavior during classroom instruction. Boys ages 8-12 (M = 9.62, SD = 1.22) with ADHD (n = 32) and typically developing boys (TD; n = 30) completed a counterbalanced series of working memory tests and watched two videos on separate assessment days: an analogue math instructional video, and a non-instructional video selected to match the content and cognitive demands of parent/teacher-described 'preferred' activities. Objective, reliable observations of attentive behavior revealed no between-group differences during the non-instructional video (d = -0.02), and attentive behavior during the non-instructional video was unrelated to all working memory variables (r = -0.11 to 0.19, ns). In contrast, the ADHD group showed disproportionate attentive behavior decrements during analogue classroom instruction (d = -0.71). Bias-corrected, bootstrapped, serial mediation revealed that 59% of this between-group difference was attributable to ADHD-related impairments in central executive working memory, both directly (ER = 41%) and indirectly via its role in coordinating phonological short-term memory (ER = 15%). Between-group attentive behavior differences were no longer detectable after accounting for ADHD-related working memory impairments (d = -0.29, ns). Results confirm anecdotal reports of intact sustained attention during activities that place minimal demands on working memory, and indicate that ADHD children's inattention during analogue classroom instruction is related, in large part

  7. Influence of Efforts of Employer and Employee on Return-to-Work Process and Outcomes

    NARCIS (Netherlands)

    Muijzer, A.; Groothoff, J. W.; Geertzen, J. H. B.; Brouwer, S.

    2011-01-01

    Background Research on disability and RTW outcome has led to significant advances in understanding these outcomes, however, limited studies focus on measuring the RTW process. After a prolonged period of sickness absence, the assessment of the RTW process by investigating RTW Effort Sufficiency

  8. Municipal Wastewater Processes. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

    Science.gov (United States)

    Stoltzfus, Lorna

    Described is a one-hour overview of the unit processes which comprise a municipal wastewater treatment system. Topics covered in this instructor's guide include types of pollutants encountered, treatment methods, and procedures by which wastewater treatment processes are selected. A slide-tape program is available to supplement this component of…

  9. Improving the making ready process - Exploring the preconditions to work tasks in construction

    DEFF Research Database (Denmark)

    Lindhard, Søren; Wandahl, Søren

    2012-01-01

    Scheduling in construction is complex. Before an activity can be conducted, a number of preconditions first have to be fulfilled. In Last Planner System this removal of constraints is referred to as the making ready process. To ensure that this process is running, the preconditions need to be kno...

  10. Improving the making ready process - exploring the preconditions to work tasks in construction

    DEFF Research Database (Denmark)

    Lindhard, Søren Munch; Wandahl, Søren

    2012-01-01

    Scheduling in construction is complex. Before an activity can be conducted, a number of preconditions first have to be fulfilled. In Last Planner System this removal of constraints is referred to as the making ready process. To ensure that this process is running, the preconditions need to be kno...

  11. Ecological and Dynamical Study of the Creative Process and Affects of Scientific Students Working in Groups

    Science.gov (United States)

    Peilloux, Aurélien; Botella, Marion

    2016-01-01

    Although creativity has drawn the attention of researchers during the past century, collaborative processes have barely been investigated. In this article, the collective dimension of a creative process is investigated, based on a dynamic and ecological approach that includes an affective component. "Dynamic" means that the creative…

  12. Learning Processes in a Work Organization: From Individual to Collective and/or Vice Versa?

    Science.gov (United States)

    Lehesvirta, Tuija

    2004-01-01

    The study investigates learning as knowledge-creation processes on individual and collective levels. The processes were examined in an ethnographic study, conducted in a metal industry company over a four-year period. The empirical study suggests that conflicts and crises experienced on individual level were some kind of incidental starting…

  13. Process and Product Explanations for What Works for LD and Why

    Science.gov (United States)

    Womack, Sid T.; Hanna, Shellie L.; Woodall, Peggy; Callaway, Rebecca

    2011-01-01

    In the history of learning disabilities education, practitioners and researchers alike have been mired in controversies about product and process approaches. This review of literature attempts to identify the most useful research about product and process approaches and to suggest situations in which each may be most appropriate. Some literature…

  14. A Processing Approach to the Working Memory/Long-Term Memory Distinction: Evidence from the Levels-of-Processing Span Task

    Science.gov (United States)

    Rose, Nathan S.; Craik, Fergus I. M.

    2012-01-01

    Recent theories suggest that performance on working memory (WM) tasks involves retrieval from long-term memory (LTM). To examine whether WM and LTM tests have common principles, Craik and Tulving's (1975) levels-of-processing paradigm, which is known to affect LTM, was administered as a WM task: Participants made uppercase, rhyme, or…

  15. Shift work and the risk of cardiovascular disease among workers in cocoa processing company, Tema.

    Science.gov (United States)

    Asare-Anane, Henry; Abdul-Latif, Adams; Ofori, Emmanuel Kwaku; Abdul-Rahman, Mubarak; Amanquah, Seth D

    2015-12-18

    Shift work has been implicated in cardiovascular disease (CVD), a major cause of death globally. The aim of this study was to evaluate the risk of developing CVD in shift work. A cross-sectional study involving secondary analysis of shift and non-shift work from an industry in Ghana. Two hundred (113 shift and 87 non-shift) consecutive workers who consented were recruited into the study. A structured questionnaire was administered to deduce information on participant's age, alcohol consumption pattern, smoking habits, history of diabetes, stroke and hypertension. Shift workers were found to be associated with higher body mass index (26.9 ± 4.6 vs 25.2 ± 3.3, p = 0.013); fasting blood glucose (5.9 ± 1.8 vs 5.3 ± 0.8, p ≤ 0.0001); glycated haemoglobin (4.9 ± 0.9 vs 4.2 ± 0.8, p ≤ 0.0001); high sensitivity C-reactive protein (2.5 ± 1.1 vs 1.8 ± 1.1, p Shift work however, had no associations with HDL-cholesterol. It can be concluded that shift work is associated with risk factors of CVD.

  16. Hamlet - little known piece by Enriko Josif: Literary-theoretical, philosophical and musicological views

    Directory of Open Access Journals (Sweden)

    Marjanović Nataša

    2011-01-01

    Full Text Available Hamlet is well-known as the most famous tragedy written by William Shakespeare. This dramatic work has, throughout the centuries, lead numerous writers, poets, literary-critics and philosophers to think about universal issues of life, human nature, love, loyalty and friendship. Hamlet has not just been the subject of discussion from the point of view of the theory of literature and human psychology and philosophy, it has also directly inspired the creation of many artistic works. One of those works which forms the main subject-matter of this paper is the almost unknown music for Hamlet by Enriko Josif. Enriko Josif was an extraordinary figure, a versatile artist and thinker, almost a kind of philosopher. In his opinion and in accordance with his inner feeling, art was a matter of divine creation first of all. He admired those artists who dealt with difficult issues of life in their works of art and William Shakespeare was to him one of the most prominent among them. In general terms, we have highlighted certain general points about Josif’s views on an artist’s life and work and have presented our notions about his piece. Specifically, we have tried to point out personal views that Josif held about Hamlet, as well as the most important features of Josif’s music, which are broadly in accordance with the literary, ethical, philosophical and theological critical tradition surrounding this masterpiece.

  17. Shared processing in multiple object tracking and visual working memory in the absence of response order and task order confounds.

    Science.gov (United States)

    Lapierre, Mark D; Cropper, Simon J; Howe, Piers D L

    2017-01-01

    To understand how the visual system represents multiple moving objects and how those representations contribute to tracking, it is essential that we understand how the processes of attention and working memory interact. In the work described here we present an investigation of that interaction via a series of tracking and working memory dual-task experiments. Previously, it has been argued that tracking is resistant to disruption by a concurrent working memory task and that any apparent disruption is in fact due to observers making a response to the working memory task, rather than due to competition for shared resources. Contrary to this, in our experiments we find that when task order and response order confounds are avoided, all participants show a similar decrease in both tracking and working memory performance. However, if task and response order confounds are not adequately controlled for we find substantial individual differences, which could explain the previous conflicting reports on this topic. Our results provide clear evidence that tracking and working memory tasks share processing resources.

  18. T-piece resuscitator versus self-inflating bag for preterm resuscitation: an institutional experience.

    Science.gov (United States)

    Jayaram, Archana; Sima, Adam; Barker, Gail; Thacker, Leroy R

    2013-07-01

    Manual ventilation in the delivery room is provided with devices such as self-inflating bags (SIBs), flow-inflating bags, and T-piece resuscitators. To compare the effect of type of manual ventilation device on overall response to resuscitation among preterm neonates born at piece was used for 159 neonates. There was no significant difference between the 1-min and 5-min Apgar scores between SIB and T-piece (P = .77 and P = .11, respectively), nor were there significant differences in secondary outcomes. The rate of rise of Apgar score was higher, by 0.47, with T-piece, compared to SIB (95% CI 0.08-0.87, P = .02). Although some manikin studies favor T-piece for providing reliable and consistent pressures, our experience did not indicate significant differences in effectiveness of resuscitation between the T-piece and SIB in preterm resuscitations.

  19. The Emergence and Workings of a Process View in Public Education Policy

    DEFF Research Database (Denmark)

    Pors, Justine Grønbæk; Ratner, Helene

    2017-01-01

    This article presents a study of Danish primary education policy with the purpose of exploring what is put at stake when contemporary management discourses describe the object of management as fluid and emergent processes rather than as entities, persons and things. The article examines how...... such a process view of organisation allows policy makers to imagine innovative change, but also how a process view interacts in particular ways with financial pressures and become entangled to increased performance measurements. We conclude that in this particular case, a conception of the object of management...

  20. The emergence and workings of a process view in public education policy

    DEFF Research Database (Denmark)

    Grønbæk Pors, Justine; Ratner, Helene Gad

    2017-01-01

    This article presents a study of Danish primary education policy with the purpose of exploring what is put at stake when contemporary management discourses describe the object of management as fluid and emergent processes rather than as entities, persons and things. The article examines how...... such a process view of organisation allows policy makers to imagine innovative change, but also how a process view interacts in particular ways with financial pressures and become entangled to increased performance measurements. We conclude that in this particular case, a conception of the object of management...