Secondhand tobacco smoke exposure in selected public places (PM2.5 and air nicotine) and non-smoking employees (hair nicotine) in Ghana.

Science.gov (United States)

Agbenyikey, Wilfred; Wellington, Edith; Gyapong, John; Travers, Mark J; Breysse, Patrick N; McCarty, Kathleen M; Navas-Acien, Ana

2011-03-01

Secondhand tobacco smoke (SHS) exposure is a global public health problem. Ghana currently has no legislation to prevent smoking in public places. To provide data on SHS levels in hospitality venues in Ghana the authors measured (1) airborne particulate matter working in smoking venues (median 2.49 [0.46-6.84] ng/mg) compared to those working in non-smoking venues (median 0.16 [0.08-0.79]ng/mg). Hair nicotine concentrations correlated with self-reported hours of SHS exposure (r=0.35), indoor air PM(2.5) concentrations (r=0.47) and air nicotine concentrations (r=0.63). SHS levels were unacceptably high in public places in Ghana where smoking is allowed, despite a relatively low-smoking prevalence in the country. This is one of the first studies to ascertain SHS and hair nicotine in Africa. Levels were comparable to those measured in American, Asian and European countries without or before smoking bans. Implementing a comprehensive smoke-free legislation that protects workers and customers from exposure to secondhand smoke is urgently needed in Ghana.

Physical hazards (noise, heat, vibration, illumination) - control at work place, methods and strategies

International Nuclear Information System (INIS)

Bose, M.; Srivastava, P.; Ganesh, G.

2016-01-01

The industrial work is getting modernized more day by day leading to more physical hazard. It is forcing the line management stressed upon in relation to the work place physical hazard. In order to keep the work place free from physical hazard it is required to use proper tool like work place assessment, measuring the parameters and analyze the end result which force us to take proper control measures to check and eliminate the physical hazard. (author)

The minimum work required for air conditioning process

International Nuclear Information System (INIS)

Alhazmy, Majed M.

2006-01-01

This paper presents a theoretical analysis based on the second law of thermodynamics to estimate the minimum work required for the air conditioning process. The air conditioning process for hot and humid climates involves reducing air temperature and humidity. In the present analysis the inlet state is the state of the environment which has also been chosen as the dead state. The final state is the human thermal comfort fixed at 20 o C dry bulb temperature and 60% relative humidity. The general air conditioning process is represented by an equivalent path consisting of an isothermal dehumidification followed by a sensible cooling. An exergy analysis is performed on each process separately. Dehumidification is analyzed as a separation process of an ideal mixture of air and water vapor. The variations of the minimum work required for the air conditioning process with the ambient conditions is estimated and the ratio of the work needed for dehumidification to the total work needed to perform the entire process is presented. The effect of small variations in the final conditions on the minimum required work is evaluated. Tolerating a warmer or more humid final condition can be an easy solution to reduce the energy consumptions during critical load periods

Alcohol and the work place

CERN Multimedia

2004-01-01

The CERN Medical Service has observed an increase in the number of personnel suffering from alcohol-related problems in recent years, in spite of the implementation of stricter regulations concerning the consumption of alcohol on the site. The causes of alcohol-related problems are often complex and many-faceted. A family history of alcohol abuse can be a cofactor in excessive drinking. The effects on a person's work are not negligible and should not be ignored. "Alcohol and the work place" is the third part of a campaign designed to raise awareness of the risks of alcohol consumption, which has already dealt with "alcohol and health" and "alcohol and road safety".Many employers have taken steps to confront the problem, and CERN launched a campaign to help its employees suffering from alcohol-related problems over ten years ago. A standing SCC sub-group on the prevention of alcoholism has been set up and Operational Circular No. 8, which defines the role and responsibilities of all parties concerned in the m...

Feasibility studies of air placed techniques as emplacement means of different backfilling materials in underground radioactive waste disposal

International Nuclear Information System (INIS)

Atabek, R.; Conche, P.; Lajudie, A.; Revertegat, E.

1992-01-01

Air placed techniques are likely to be used as emplacement means of different backfilling materials in underground waste repositories. A literature survey of the air placed techniques and equipments leads to the choice of the dry process taking into account the emplacement constraints (distance: 300 m, flow: 10 m 3 /h) and the large variety of materials to be placed. Tests performed in the case of cement-based materials (with and without addition of silica fumes), for different types of cement and as a function of the incidence of the jet, show that it is possible to put in place mortars of good quality. However heterogeneity in the material composition is found when the jet is stopped. This problem may be partly solved by a better automation of the process. Complementary tests, carried out with the preselected clay of Fourges Cahaignes, clearly demonstrate the ability of the air placed technique to put in place pure clay: a dry density of 1.50kg/m 3 is reached in the case of coarse material and for a final water content of 30% (in weight). Feasibility tests performed on clay-sand mixtures are not conclusive due to an unappropriate granulometry distribution of the sand. 11 figs., 9 tabs

Work place monitoring in accelerator facilities using thermoluminescent dosimeters

International Nuclear Information System (INIS)

Ribeiro, M.S.; Sanches, M.P.; Osima, A.M.; Rodriguez, D.L.; Carvalho, R.N.; Somessari, R.N.

1998-01-01

The increase in the use of large amounts of energy and large particles accelerators in development or in industrial processes for the reticulation, polymerization and sterilization of cables and wires allowed to discover and monitor work places in facilities having particle accelerators at the Institute of Energy and Nuclear Inquiries Comissao National de Energy Nuclear. Measures previously taken by technicians in routine monitoring, show that radiation doses found in the beams tube and at the door of the accelerator area is high enough to require routine programs to monitor work places at the installation. That is why, fifteen thermoluminescent dosimeters (TLD) where placed in different points of the facility where doses must be measured along a three month period and at the same time readings must be taken from control dosimeters kept within a shielded container. The monitor had a small double layer with three pellets of TLD CaSO4 Dy inside of a route carrier adopted in routine workers dosimetry usually. Outcomes show that the radiological protection program must be implemented to ameliorate and guarantee safety procedures

To Place or Not to Place: Toward an Environmental History of Modern Medicine.

Science.gov (United States)

Sellers, Christopher

2018-01-01

Reviewing recent, overlapping work by historians of medicine and health and of environmental history, this article proposes a further agenda upon which scholars in both fields may converge. Both environmental and medical historians can seek to understand the past two centuries of medical history in terms of a seesaw dialogue over the ways and means by which physicians and other health professionals did, and did not, consider the influence of place-airs and waters included-on disease. Modernizing and professionalizing as well as new styles of science nourished attendant aspirations for a clinical place neutrality, for a medicine in which patients' own places didn't matter to what doctors thought or did. The rise of place neutrality from the late nineteenth century onward also had close and enabling historical ties to the near-simultaneous formation of place-defined specialties-tropical medicine, bacteriological public health, and industrial medicine and hygiene.

Technical assessment of compliance with work place air sampling requirements at T Plant. Revision No. 1

International Nuclear Information System (INIS)

Hackworth, M.F.

1995-01-01

The US DOE requires its contractors to conduct air sampling to detect and evaluate airborne radioactive material in the workplace. Hanford Reservation T Plant compliance with workplace air sampling requirements has been assessed. Requirements, basis for determining compliance and recommendations are included

Automatic radiological control of the working room air at Valduc

International Nuclear Information System (INIS)

Herve, J.Y.; Camus, L.; Leroux, J.C.

1991-01-01

The facilities of the Centre d'etudes de Valduc, require air control in the different rooms where a radiological hazard exists. To this purpose, every day, the radiation protection technicians put 230 filters on the sampling heads in the working places proximity. To measure any radioactivity retained by the filters, the Valduc Radiation protection service uses an automated system, which identifies the filter origin, carries out the measurements and produces the results. Filters are identified by bar code labels, which are red by an optical reader located in each of the two measurement lines. These are Nu-16 (Numelec Ins.) type low α-and β-activity counting sets, equipped with proportional mode circulation counters. An IBM-PC type microcomputer is used for the whole assembly monitoring and the data centralization. Results can be edited in different forms: daily, monthly, trimestrial or annual results. The system operating mode is satisfying, and has allowed to clear an one-man equivalent work-load [fr

Sexual harassment at work place: are you safe?

Science.gov (United States)

Naveed, Anila; Tharani, Ambreen; Alwani, Nasreen

2010-01-01

In today's world women are increasingly participating in the realm of work force, yet they are facing many obstacles in their way. Sexual harassment is one of those obstacles. Sexual harassment at work place is prevalent in every society. It could happen to anyone but women are the targeted victims. Sexual harassment is considered as a traumatic event and the victim may end up in having physical and mental sufferings that hinders a person to work effectively. At an organisational level this may result in decrease work effectiveness, decreased work productivity, high absenteeism, high turnover, and low staff morale. Hence there is a need that, organisations and government should look seriously into this matter. Proper education and training programs should be developed to deal with these issues. The goal must be both to deal with sexual harassment incidents effectively and to prevent the occurrence of future incidents.

Work place air particulate monitoring of automobile workshops for public health and safety

International Nuclear Information System (INIS)

Siddique, N.; Waheed, S.

2013-01-01

Twenty-eight pairs of coarse and fine air particulate samples were collected in front of an automotive workshop located at Tasmasipabad on Chaklala Road in Rawalpindi using a Gent sampler and polycarbonate filters. These samples were collected during the period; 7th to 27th of April 2009. The gravimetric data (PM 2.5 and PM 10 ) were obtained for these samples and were found to exceed the Pakistani standards. Black carbon (BC) was also determined using reflectance measurements and it was found that BC contributed significantly more to the fine mass than to the coarse fraction; i.e. ∼10 to ∼3 %, respectively. This is not surprising as soot is emitted by combustion processes and is usually found in the fine particulate mass. Using instrumental neutron activation analysis technique all 28 pairs of filters were analyzed for >30 elements. Major elements, in the coarse mass fraction, include Al, K, Fe, Sr, Na, and Zn implying soil as the major source while BC was found to be a higher contributor of PM 2.5 . An episode of high PM 2.5 was observed on the 18th of April 2009. Back trajectory analysis showed that the air mass originated from the Middle East where a dust storm was in progress over Iraq. (author)

Methods for in-place testing of HEPA and iodine filters used in nuclear power plants

International Nuclear Information System (INIS)

Holmberg, R.; Laine, J.

1978-04-01

The purpose of this work was a general investigation of existing in-place test methods and to build an equipment for in-place testing of HEPA and iodine sorption filters. In this work the discussion is limited to methods used in in-place testing of HEPA and iodine sorption filters used in light-water-cooled reactor plants. Dealy systems, built for the separation of noble gases, and testing of them is not discussed in the work. Contaminants present in the air of a reactor containment can roughly be diveded into three groups: aerosols, reactive gases, and noble gases. The aerosols are filtered with HEPA (High Efficiency Particulate Air) filters. The most important reactive gases are molecular iodine and its two compounds: hydrogen iodide and methyl iodide. Of gases to be removed by the filters methyl iodide is the gas most difficult to remove especially at high relative humidities. Impregnated activated charcoal is generally used as sorption material in the iodine filters. Experience gained from the use of nuclear power plants proves that the function of high efficiency air filter systems can not be considered safe until this is proved by in-place tests. In-place tests in use are basically equal. A known test agent is injected upstream of the filter to be tested. The efficiency is calculated from air samples taken from both sides of the filter. (author)

Sample and injection manifolds used to in-place test of nuclear air-cleaning system

International Nuclear Information System (INIS)

Qiu Dangui; Li Xinzhi; Hou Jianrong; Qiao Taifei; Wu Tao; Zhang Jirong; Han Lihong

2012-01-01

Objective: According to the regulations of nuclear safety rules and related standards, in-place test of the nuclear air-cleaning systems should be carried out before and during operation of the nuclear facilities, which ensure them to be in good condition. In some special conditions, the use of sample and injection manifolds is required to make the test tracer and ventilating duct air fully mixed, so as to get the on-spot typical sample. Methods: This paper introduces the technology and application of the sample and injection manifolds in nuclear air-cleaning system. Results: Multi point injection and multi point sampling technology as an effective experimental method, has been used in a of domestic and international nuclear facilities. Conclusion: The technology solved the problem of uniformly of on-spot injection and sampling,which plays an important role in objectively evaluating the function of nuclear air-cleaning system. (authors)

Working Place as an Organisational Form of the Process of Labour

Directory of Open Access Journals (Sweden)

Amosov Oleg Yu.

2013-11-01

Full Text Available In order to achieve efficient functioning of modern production based on application of complex equipment and technology, which is characterised with a big number of internal production links, it is necessary to have an accurate organisation of the working place. The article considers the working place notion not from the position of a portion of space, which is adjusted for performance of production functions by a worker, but as an organisational form of the process of labour, which integrates its following components: organisational, technical, economic, social security of labour and intellectualisation of labour.

The results of air treatment process modeling at the location of the air curtain in the air suppliers and ventilation shafts

Directory of Open Access Journals (Sweden)

Nikolaev Aleksandr

2017-01-01

Full Text Available In the existing shaft air heater installations (AHI, that heat the air for air suppliers in cold seasons, a heater channel is used. Some parts of the air from the heater go to the channel, other parts are sucked through a pithead by the general shaft pressure drawdown formed by the main ventilation installation (MVI. When this happens, a mix of two air flows leads to a shaft heat regime violation that can break pressurization of intertubular sealers. The problem of energy saving while airing underground mining enterprises is also very important. The proposed solution of both tasks due to the application of an air curtain is described in the article. In cold seasons the air treatment process should be used and it is offered to place an air curtain in the air suppliers shaft above the place of interface of the calorifer channel to a trunk in order to avoid an infiltration (suction of air through the pithead. It’s recommended to use an air curtain in a ventilation shaft because it reduces external air leaks thereby improving energy efficiency of the MVI work. During the mathematical modeling of ventilation and air preparation process (in SolidWorks Flowsimulation software package it was found out that the use of the air curtain in the air supply shaft can increase the efficiency of the AHI, and reduce the electricity consumption for ventilation in the ventilation shaft.

Stirling engine with air working fluid

Science.gov (United States)

Corey, John A.

1985-01-01

A Stirling engine capable of utilizing air as a working fluid which includes a compact heat exchange module which includes heating tube units, regenerator and cooler positioned about the combustion chamber. This arrangement has the purpose and effect of allowing the construction of an efficient, high-speed, high power-density engine without the use of difficult to seal light gases as working fluids.

MAK and BAT values list 2017. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

International Nuclear Information System (INIS)

2017-01-01

The MAK and BAT values list 2017 includes the maximum permissible concentrations at the place of work and biological tolerance values for working materials. The following working materials are covered: carcinogenic working materials, sensitizing materials and aerosols. The report discusses the restriction of exposure peaks, skin resorption, MAK (maximum working place concentration) values during pregnancy, germ cell mutagens and specific working materials. Importance and application of BAT (biological working material tolerance) values, list of materials, carcinogens, biological guide values and reference values are also included.

MAK and BAT values list 2016. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

International Nuclear Information System (INIS)

2016-01-01

The MAK and BAT values list 2016 includes the maximum permissible concentrations at the place of work and biological tolerance values for working materials. The following working materials are covered: carcinogenic working materials, sensitizing materials and aerosols. The report discusses the restriction of exposure peaks, skin resorption, MAK (maximum working place concentration) values during pregnancy, germ cell mutagens and specific working materials. Importance and application of BAT (biological working material tolerance) values, list of materials, carcinogens, biological guide values and reference values are also included.

Conscious Thought is for facilitating the work places as learning spaces

NARCIS (Netherlands)

van Dellen, Theo

2015-01-01

Conscious Thought is for facilitating the work places as learning spaces Theo van Dellen In the workplace learning and development of work identity can be assumed in at least three ways. First, the processes are managed by the organizational context, which promotes a particular model of workers as

An Assessment of Air Quality in the Surrounding Holy Places of Mecca, Saudi Arabia during Hajj

Science.gov (United States)

Khwaja, H. A.; Aburizaiza, O. S.; Siddique, A.; Hussain, M. M.; Khatib, F.; Zeb, J.; Blake, D. R.

2014-12-01

The associations of exposure to air pollution and adverse human health effects have been demonstrated in many epidemiologic studies. Hajj, an annual pilgrimage of Islam, draws millions of pilgrims from more than 200 countries for religious rituals in Mecca, Saudi Arabia. The city is surrounded by mountains with a population of 1.7 million, which gets doubles or even more during Hajj. The city centers on the Grand Mosque (Masjid Al-haram), connected with the network of tunnels. Main Hajj pilgrimage route for five days extends 20 km to the east and includes "Mina", "Arafat", and "Muzdalifah". A detailed study was conducted in Mecca, its tunnels, and surrounding holy places during Hajj (October 13-17, 2013). Spatial and temporal variations in total suspended particulate (TSP), PM10 , PM7 , PM2.5 , PM1 , ozone (O3), and black carbon (BC) levels along the route were recorded using portable monitors and GPS to assess the status of air quality. This is the first study to elucidate the exposure to air pollutants among pilgrims. Extremely high levels of all pollutants were observed during the intensive measuring periods. For example, the PM7 , PM2.5 , O3, and BC concentrations of up to 9,433 µg/m3, 484 µg/m3, 444 ppb, and 468 µg/m3, respectively, were observed. Results of this investigation revealed that most routes had on average exceeded the World Health Organization (WHO) standards for PM10 and PM2.5 . The reasons for the high air pollutants concentrations are most probably high volume of traffic, construction work, re-suspension of particles, and geographical conditions (arid regions). The pilgrim's longer trip duration lead to their highest whole trip exposure to air pollutants, which indicate that they are possibly subject to higher health risk. Better understanding of air pollution exposure and their determinants in the environments will contribute to the development of more appropriate exposure reductive strategies and have significant public health meanings.

MAK and BAT values list 2015. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

International Nuclear Information System (INIS)

2015-01-01

The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2015 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

MAK and BAT values list 2014. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

International Nuclear Information System (INIS)

2014-01-01

The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2014 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

29 CFR 1926.913 - Blasting in excavation work under compressed air.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Blasting in excavation work under compressed air. 1926.913... Use of Explosives § 1926.913 Blasting in excavation work under compressed air. (a) Detonators and... connecting wires are connected up. (b) When detonators or explosives are brought into an air lock, no...

List of hazardous substances for 1995. Hazardous substances at the working place; Gefahrstoffliste 1995. Gefahrstoffe am Arbeitsplatz

Energy Technology Data Exchange (ETDEWEB)

Pflaumbaum, W. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Blome, H. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Kleine, H. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Stamm, R. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany)

1995-04-01

The List of Hazardous Substances for 1995 contains a summarizing table of the most important regulations concerning safety and health at the working place together with supplementary information. The present version, compiled by the Berufsgenossenschaftliche Institut fuer Arbeitssicherheit (Trade Associations` Institute for Working Safety), is an update of the List of Hazardous Substances for 1994. The List contains the prescribed classifications and designations of substances and preparations pursuant to the EC Directive 67/548/EEC (including the 20th amendment); the substances contained in the ``List of carcinogenic, mutagenic and reproduction-endangering substances`` (TRGS 905); the air pollution limit values of MAK and TRK (``Air pollution limit values at the working place``, TRGS 900); and the Biological Tolerance Values (BAT, TRGS 903). At the end it provides information, amongst other things, on measuring methods (DFG, ZH1/120, BIA desk folder, HSE, NIOSH, OSHA), industrial medicine, substance-specific regulations of the Ordinance On Hazardous Substances (GefStoffV), Ordinance of Prohibitions Concerning Chemicals (ChemVerbotsV), and Hazardous Substances Technical Code (TRGS), and on regulations of the trade associations. The amendments to the Technical Code (e.g. TRGS 900 and 905) published in early 1995 have also been incorporated. (orig./SR) [Deutsch] Das Berufsgenossenschaftliche Institut fuer Arbeitssicherheit - BIA hat in der Gefahrstoffliste 1995 die wichtigsten Regelungen fuer die Sicherheit und Gesundheit am Arbeitsplatz sowie ergaenzende Hinweise in einer Tabelle zusammengefasst. Die vorliegende Version aktualisiert die Gefahrstoffliste aus dem Jahr 1994. Die Liste enthaelt die vorgeschriebenen Einstufungen und Kennzeichnungen von Stoffen und Zubereitungen gemaess der EU-Richtlinie 67/548/EWG (einschliesslich 20. Anpassung) sowie die in der TRGS 905 ``Verzeichnis krebserzeugender, erbgutveraendernder und fortpflanzungsgefaehrdender Stoffe

[Work place health promotion programmes of the statutory German Pension Insurance].

Science.gov (United States)

Meffert, C; Mittag, O; Jäckel, W H

2013-12-01

In 2009, the amendment of § 31 Abs. 1 Nr. 2 SGB VI gave the German Pension Insurance the opportunity to provide outpatient medical treatments for insured people who have an occupation with particularly high risk of health. Ever since, the German Pension Insurance has developed various work place prevention programmes, which have been implemented as pilot projects. This article aims at systematically recording and comparatively analyzing these programmes in a synopsis which meets the current state of knowledge. We developed an 8 page questionnaire focusing on work place prevention programmes by the German Pension Insurance. This questionnaire was sent to people in charge of all programmes known to us. All programmes have been drafted -across indications. They are aiming at insured people who already suffer from first health disorders but who are not in imminent need of rehabilitation. However, the concrete target groups at which the specific programmes are aimed differ (shift workers, nurses, elderly employees). Another difference between the various programmes is the setting (in- or outpatients) as well as the duration. All programmes are using existing structures offered by the German Pension Insurance. They provide measures in pension insurance owned rehabilitation centers. It would be desirable to link these performances with internal work place health promotion and offers of other social insurances. © Georg Thieme Verlag KG Stuttgart · New York.

Pollution level, phase distribution and health risk of polycyclic aromatic hydrocarbons in indoor air at public places of Hangzhou, China

International Nuclear Information System (INIS)

Lu Hao; Zhu Lizhong; Chen Shuguang

2008-01-01

PAHs pollution survey in air of public places was conducted in Hangzhou, China. The most serious PAHs pollution was observed in indoor air of shopping centers and the slightest was in train stations. The molecular weight of chrysene (MW 228) appeared to be the dividing line for the PAHs with a larger or smaller distribution in the vapor or particulate phase. Concentrations of 15 PAHs on PM 2.5 accounted for 71.3% of total particulate PAHs, and followed by PM 2.5-10 fraction (17.6%) and >PM 10 fraction (11.1%). In shopping centers and supermarkets, emission of 2-4 rings PAHs occurred from indoor sources, whereas 5-6 rings PAHs predominantly originated from transport of outdoor air. In temples, PAHs in indoor air mainly originated from incense burning. Health risks associated with the inhalation of PAHs were assessed, and naphthalene made the greatest contribution (62.4%) to the total health risks. - Concentrations of PAHs in the air of selected public places in Hangzhou correspond to 10 -3 life-time lung cancer risk

Phase I Recommendations by the Air Quality Management Work Group to the Clean Air Act Advisory Committee

Science.gov (United States)

Recommendations to the Clean Air Act Advisory Committee by Air Quality Management Work Group addressing the recommendations made by the National Research Council to improve the U.S. air quality management system.

Application of air traffic control competence reference models as a mean of air navigation services provider’s charge optimization

Directory of Open Access Journals (Sweden)

В.П. Харченко

2010-01-01

Full Text Available  The issue of application of Air Traffic Control (ATC competence reference models as a mean of air navigation services provider’s charge optimization is described in the article, and this issue is interpretated as an optimization task. The data relating to the significant growth of aviation traffic, especially using the airspace of Ukraine, given by authors, and the statement of fact that Air Traffic Management (ATM system’s technical component reliability increasement takes place on the basis of practically invariable psychophysiological abilities of aviation controller, make the substantiation of ANSP provision with the most trained ATC controllers for the work on the working places of ATC Unit actual. The ‘mechanism’ of ATC controllers competence reference model creation is defined step-by step. There is an example of candidate’s for the working place competence quantitative individual model forming as a common criteria of competence, which, in its turn, is the compressed format of all parameters of its working activity, received at the stage of control. The approach, according to which the individual parameters of graduating student’s output model’s professional characteristics, which he received after the examination of his work as Tower controller (ATM Unit of aerodrome control service, approach controller or area control service controller, are compared with the predetermined specialist’s competence reference model, relating to the special working place in ATM system, is supposed here. Notably, the conception, relating to the correspondence of the graduating student’s competence output level to the defined reference model of ATC controller, relating to the special working place of ATM Unit, is realised.

THE GENERAL CONTEXTUAL FRAME FOR PLACING SUPERIOR STUDIES GRADUATES IN THE WORK MARKET

Directory of Open Access Journals (Sweden)

FELICIA ANDRIONI

2013-12-01

Full Text Available Integration in a workplace is an interaction rapport between the individual and the environment. The process of professional integration is strongly linked to the professional aspiration, individual expectations, motivation, and work satisfaction. Placing young graduates of superior studies on the labour market is a challenge for contemporary society. Identifying a suitable work place as well as the certainty of the attained work place are very important elements for young superior studies graduates in the current context of economic crysis. The difficulties in getting a job for superior studies graduates are most frequently associated with lacks in what regards the speciality practical skills and generally, insertion in the work market is achived by getting a position in fields that are related or even different from the speciality field. In an extremely unstable social and economic context, people’s ability to quickly adapt to the requirements of the labour market is fundamental. In this respect, education and professional training have an important role, contributing to the update of knowledge, skills and qualifications of superior studies graduates or future superior studies graduates, eventually allowing them to stay active, flexible, adapted to the situations and requirements of the labour market.

Compressed-air work is entering the field of high pressures.

Science.gov (United States)

Le Péchon, J Cl; Gourdon, G

2010-01-01

Since 1850, compressed-air work has been used to prevent shafts or tunnels under construction from flooding. Until the 1980s, workers were digging in compressed-air environments. Since the introduction of tunnel boring machines (TBMs), very little digging under pressure is needed. However, the wearing out of cutter-head tools requires inspection and repair. Compressed-air workers enter the pressurized working chamber only occasionally to perform such repairs. Pressures between 3.5 and 4.5 bar, that stand outside a reasonable range for air breathing, were reached by 2002. Offshore deep diving technology had to be adapted to TBM work. Several sites have used mixed gases: in Japan for deep shaft sinking (4.8 bar), in The Netherlands at Western Scheldt Tunnels (6.9 bar), in Russia for St. Petersburg Metro (5.8 bar) and in the United States at Seattle (5.8 bar). Several tunnel projects are in progress that may involve higher pressures: Hallandsås (Sweden) interventions in heliox saturation up to 13 bar, and Lake Mead (U.S.) interventions to about 12 bar (2010). Research on TBMs and grouting technologies tries to reduce the requirements for hyperbaric works. Adapted international rules, expertise and services for saturation work, shuttles and trained personnel matching industrial requirements are the challenges.

Testing on air cleaning systems: Testing of the components in-place tests; Controle des installations d'epuration de l'air essais de conformite des elements: Tests in situ

Energy Technology Data Exchange (ETDEWEB)

Billard, F; Brion, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1967-07-01

The reliability of air cleaning systems is dependent on testing they are submitted to. Although in-place tests are the most important as they act as final tests upon achieved plants, component tests are necessary too. They allow detection of defective units before they are installed, partition of unit defects from mounting defects and they are more sensitive. For similar reasons, material teats are most useful. The various tests are described, about aerosol filters for one part, iodine trap for the other. The checked features are: materials nature, units sizes, efficiency, air resistance, flammability, humidity resistance, temperature resistance, adsorbent friability, etc... On iodine trapping systems, small check traps, working by-pass with the main trap are periodically subjected to efficiency test. This control allow to cut down the in-place tests frequency, particularly when poisoning from organic vapours is to be feared. (authors) [French] La surete de fonctionnement des installations d'epuratition de l'air esf fonction des controles auxquels ces installations sont soumises. Si les tests in situ sont les plus importants puisqu'ils constituent le controle final de l'installation terminee, les essais de conformite des elements constitutifs sont egalement necessaires. Ils permettent l'elimination d'elements defectueux avant leur mise en place, la discrimination des defauts du montage de ceux de l'element et sont en outre plus sensibles. De meme, le controle des materiaux constitutifs de l'element s'avere fort utile. On decrit les differents controles, d'une part, pour les fittres a aerosols, d'autre part, pour les pieges a iode. Les caracteristiques verifiees sont: nature des materiaux, dimenesions des elements, efficacite, perte de charge, resistance mecanique, inflammabilite, tenue a l'humidite, tenue a la temperature, resistance au detassement des pieges a iode, friabilite du materiau adsorbant, etc... En ce qui concerne les installations de piegeage d

Job Satisfaction and Job Performance at the Work Place

OpenAIRE

Vanden Berghe, Jae Hyung

2011-01-01

The topic of the thesis is job satisfaction and job performance at the work place. The aim is to define the determinants for job satisfaction and to investigate the relationship between job satisfaction and job performance and the influence of job satisfaction on job performance. First we look into the Theory of Reasoned Action and the Theory of Planned Behaviour to account for the relationship between attitudes and behaviour. Job satisfaction is then explained as a function of job feature...

Decreased work ability associated to indoor air problems--An intervention (RCT) to promote health behavior.

Science.gov (United States)

Vuokko, Aki; Selinheimo, Sanna; Sainio, Markku; Suojalehto, Hille; Järnefelt, Heli; Virtanen, Marianna; Kallio, Eila; Hublin, Christer; Karvala, Kirsi

2015-07-01

Indoor air problems may induce respiratory irritation and inflammation. In occupational settings, long-lasting non-specific building-related symptomatology, not fully medically explained, is encountered. The symptomatology may lead to illness, avoidance behavior and decreased work ability. In Finland, investigations of workers suspected of occupational asthma have revealed excess disability. There are no well-established clinical practices for the condition. The aim was to develop a clinical intervention for patients with non-specific indoor air-related symptoms and decreased work ability. A randomized controlled trial including psychoeducation and promotion of health behavior was carried out in 55 patients investigated for causal relationship between work-related respiratory symptoms and moisture damaged workplaces. Inclusion criteria for disability was the work ability score (WAS)≤7 (scale 0-10) and indoor air-related sick leave ≥14 days the preceding year. After medical evaluation and the 3-session counseling intervention, follow-up at 6-months was assessed using self-evaluated work-ability, sick leave days, quality of life, and illness worries as outcome measures. The mean symptom history was 55.5 months. 82% (45 out of 55) had asthma with normal lung function tests in most cases, although reporting abundant asthma symptoms. 81% of patients (39/48) had symptomatology from multiple organ systems without biomedical explanation, despite environmental improvements at work place. At the psychological counseling sessions, 15 (60%) patients of the intervention (INT, n=25) group showed concerns of a serious disease and in 5 (20%), concerns and fears had led to avoidance and restricted personal life. In the 6-month follow-up, the outcomes in the INT group did not differ from the treatment as usual group. No intervention effects were found. Patients shared features with medically unexplained symptoms and sick building syndrome or idiopathic environmental intolerance

125I and 123I monitoring at the working-places of the Eidg. Institut fuer Reaktorforschung (EIR) at Wuerenlingen (Switzerland)

International Nuclear Information System (INIS)

Goerlich, W.; Baechli, H.R.; Baur, W.; Koch, H.

1976-01-01

A group of persons exposed to radiation for professional reasons was monitored in EIR by means of thyroid and urin tests during one year. To determine the incorporation risk at the working-place wipe tests and air filter samples were carried out daily during the same time. The activities determined in the urin vary between 0,3% and 6% of the thyroid depot. The urin measurements are suitable for the manifestation of the incorporation. But to evaluate these the individual iod-excretion-rate must be determined before. The results of the measurements, the measuring devices, and the methods are explained. Incorporation was caused by improper storage of preparations and wastes, insufficient aeration, and imperfect methods. (orig./HP) [de

Do work-place initiated measures reduce sickness absence? Preventive measures and sickness absence among older workers in Norway.

Science.gov (United States)

Midtsundstad, Tove I; Nielsen, Roy A

2014-03-01

The article examines whether preventive measures and work adjustments at the establishment level affects sickness absence among workers aged 50 years and older. We combine survey data from a representative sample of 713 Norwegian companies, mapping the prevalence of preventive health measures in the work place in 2005, with register data on sickness absence and demographic variables for workers aged 50 years or older in 2001 and 2007. By means of a difference-in-differences approach, we compare changes and differences in the likelihood of sickness absence among the sample group, with and without the various measures/ instruments in 2005 respectively. In general, work-place preventive measures at the establishment level have not contributed to reducing the probability for sickness absence among workers aged 50 years and older. However, analyses comparing differences between industries find that the work-place measures have had a positive effect on public administration employees. Whether work-place preventive initiatives influence levels of sickness absence seems to be contingent on sector and industry. Therefore, work-place measures may be more effective in the public administration sector where most employees have office jobs compared to sectors such as manufacturing, construction and transportation, where many employees have manual work and more physical demanding jobs. Work-place initiatives thus seem to have less effect on preventing sickness absence in sectors dominated by manual labour.

Design and development of a work robot to place ATLAS SCT modules onto barrel cylinders

International Nuclear Information System (INIS)

Terada, S.; Kobayashi, H.; Sengoku, H.; Kato, Y.; Hara, K.; Honma, F.; Ikegami, Y.; Iwata, Y.; Kohriki, T.; Kondo, T.; Nakano, I.; Takashima, R.; Tanaka, R.; Ujiie, N.; Unno, Y.; Yasuda, S.

2005-01-01

More than 2000 silicon modules need to be placed and fastened on the ATLAS SCT barrel tracker. A semi-automatic pick-and-place work robot was designed and developed to cope with the module placement for the SCT barrel assembly. We found that this robot could place modules to a mechanical precision of better than 25 μm

Design and development of a work robot to place ATLAS SCT modules onto barrel cylinders

CERN Document Server

Terada, S; Honma, F; Ikegami, Y; Iwata, Y; Kato, Y; Kobayashi, H; Kohriki, T; Kondo, T; Nakano, I; Sengoku, H; Takashima, R; Tanaka, R; Ujiie, N; Unno, Y; Yasuda, S

2005-01-01

More than 2000 silicon modules need to be placed and fastened on the ATLAS SCT barrel tracker. A semi-automatic pick-and-place work robot was designed and developed to cope with the module placement for the SCT barrel assembly. We found that this robot could place modules to a mechanical precision of better than 25 mum.

Work/Life Boundary Management in an Integrative Environment: A Study of Residence Life Professionals who Live at Their Place of Work

Science.gov (United States)

Rankin, Pressley Robinson, IV

2013-01-01

How individuals manage work/life boundaries when they live at the place they work, as opposed to working from home, is a gap in both work/life literature and in higher education literature. An obvious example from higher education is the resident life professional that lives in the residential facility that she or he oversees. Living in a…

Chronicity of sexual harassment and generalized work-place abuse: effects on drinking outcomes.

Science.gov (United States)

Rospenda, K M; Richman, J A; Wislar, J S; Flaherty, J A

2000-12-01

This study examined the impact of two forms of interpersonal conflict in the work-place, sexual harassment (SH) and generalized work-place abuse (GWA), on drinking outcomes. We hypothesized that SH and GWA would be associated more strongly with negative outcomes than task-related work stressors, especially when SH and GWA were chronic problems. This was a two-wave panel study. The study was conducted at an urban university in the United States. Participants were 2038 university employees in four occupational groups (faculty, student, clerical and service workers) who responded to both waves of the survey. Data on SH, GWA, task-related stressors and drinking outcomes were gathered from self-report mail questionnaires. Data from 1880 non-abstaining respondents were included in the analyses. SH and GWA experiences were widespread, typically chronic, and tended to co-occur. In regression analyses controlling for demographics, occupational group, prior drinking and task-related stress, GWA chronicity was linked to increased odds of reporting one or more indicators of problem drinking at time 2, in contrast to onset and remission. SH chronicity coupled with no GWA experiences was also significantly related to increased drinking variability. Task-related stressors generally did not explain significant variance in drinking outcomes. SH and GWA may be better predictors of drinking behavior compared to task-related stressors, particularly when harassment is chronic. Increased attention to conflictual relationships in the work-place, the relationship between SH and GWA and the dynamic nature of stressors in general is necessary in future research on drinking behavior.

Experimental and theoretical/numerical study of evaporation from shallow pools of organic liquids, at simulated work place conditions

Energy Technology Data Exchange (ETDEWEB)

Lennert, Anne Spandet

1998-04-01

The rate of evaporation from shallow pools of organic liquids was measured together with the global pollutant concentration distribution in a test chamber simulating work place conditions at room temperature. factorial data cover three liquids with different volatility, three pool geometries, and three room convective velocities in the range usually met in occupational hygiene. The data are compared to 6 semi-empirical correlations for mass tranfer employed in occupational hygiene and to 5 analytical correlations for boundary layer theory derived by the Reynolds analogy to heat transfer. The semi-empirical correlations generally showed a fair agreement for all experimental data, but tended to underestimate the evaporation especially at the lowest air velocity. All analytical correlations strongly underestimated all experimental data. A new simple correlation predicting evaporation rate based on the data was suggested. Three-dimensional CFD-predictions for laminar flow are in fair agreement with the data on the evaporation rates for the experiment that covers three organic compounds, all pool geometries and the two lowest levels of the air velocity. The global pollutant concentration distribution in case of convective air flow cannot be predicted by the model developed by Roach. If knowledge of the evaporation rate and pollutant concentration at some distance from the source were available, the predicted global pollutant concentration distribution by the model suggested by Scheff. offered a fair agreement with observed data. The box model suggested by Sinden generally offered a fair performance but tended to underestimate the pollutant concentration in region close to the source. Preliminary three-dimensional CFD-predictions of the pollutant concentration distribution in the test chamber covering the data with the lowest air velocity were in fair agreement with the average pollutant concentration but overestimated the average velocity. (au) 29 refs.

Working Toward Policy-Relevant Air Quality Emissions Scenarios

Science.gov (United States)

Holloway, T.

2010-12-01

Though much work has been done to develop accurate chemical emission inventories, few publicly available inventories are appropriate for realistic policy analysis. Emissions from the electricity and transportation sectors, in particular, respond in complex ways to policy, technology, and energy use change. Many widely used inventories, such as the EPA National Emissions Inventory, are well-suited for modeling current air quality, but do not have the specificity needed to address "what if?" questions. Changes in electricity demand, fuel prices, new power sources, and emission controls all influence the emissions from regional power production, requiring a plant-by-plant assessment to capture the spatially explicit impacts. Similarly, land use, freight distribution, or driving behavior will yield differentiated transportation emissions for urban areas, suburbs, and rural highways. We here present results from three recent research projects at the University of Wisconsin—Madison, where bottom-up emission inventories for electricity, freight transport, and urban vehicle use were constructed to support policy-relevant air quality research. These three studies include: 1) Using the MyPower electricity dispatch model to calculate emissions and air quality impacts of Renewable Portfolio Standards and other carbon-management strategies; 2) Using advanced vehicle and commodity flow data from the Federal Highway Administration to evaluate the potential to shift commodities from truck to rail (assuming expanded infrastructure), and assess a range of alternative fuel suggestions; and 3) Working with urban planners to connect urban density with vehicle use to evaluate the air quality impacts of smart-growth in major Midwest cities. Drawing on the results of these three studies, and on challenges overcome in their execution, we discuss the current state of policy-relevant emission dataset generation, as well as techniques and attributes that need to be further refined in order

Assessment of knowledge, practices, and work place condition related to ergonomics among dental students of Bhopal city - A questionnaire study

Directory of Open Access Journals (Sweden)

Swapna Munaga

2013-01-01

Full Text Available Background: Dental profession is susceptible to various postural and nonpostural occupational risks. Aim : To determine knowledge, practice, and condition of work place regarding ergonomic posture among dental students from Bhopal city, Central India. Also to observe any correlation among knowledge, practice, and condition of work place scores. Materials and Methods : A self-administered questionnaire study was conducted among 231 dental students. The questionnaire consisted of three parts: Knowledge, practice, and condition of work place. Analysis of variance was used to compare mean of knowledge, practice of clinical posture, and condition of work place. Pearson′s correlation coefficient has been applied to compute correlation among knowledge, practice, and condition of work place scores. A P value < 0.05 was considered significant for all statistical analyses. Results : We found that 70% of dental students perform torsion of the body and cervical flexion to improve vision and prefer direct vision when working. Only 59% reported that they are working with ergonomically designed dental unit and instruments. Most of them reported that the work stool is not comfortable. Mean knowledge, practice, and condition of work place scores were 3.93 (1.26, 5.01 (1.58, and 2.60 (1.14, respectively. Significant differences between the groups were noted for means of practice scores (P ≤ 0.01. Significant linear correlation was seen between knowledge-practice scores (r = 0.20 (P ≤ 0.01, practice-condition of work place scores (r = 0.14 (P ≤ 0.05, and knowledge-condition of work place scores (r = 0.14 (P ≤ 0.05. Conclusion : The knowledge of ergonomic postural requirements and their clinical application among the dental students surveyed were not satisfactory. A multifactorial approach that includes preventive education, postural and positioning strategies, proper selection, and use of ergonomic equipment should be employed.

Work-place social capital and smoking cessation: the Finnish Public Sector Study.

Science.gov (United States)

Kouvonen, Anne; Oksanen, Tuula; Vahtera, Jussi; Väänänen, Ari; De Vogli, Roberto; Elovainio, Marko; Pentti, Jaana; Leka, Stavroula; Cox, Thomas; Kivimäki, Mika

2008-11-01

To examine whether high social capital at work is associated with an increased likelihood of smoking cessation in baseline smokers. Prospective cohort study. Finland. A total of 4853 employees who reported to be smokers in the baseline survey in 2000-2002 (response rate 68%) and responded to a follow-up survey on smoking status in 2004-2005 (response rate 77%). Work-place social capital was assessed using a validated and psychometrically tested eight-item measure. Control variables included sex, age, socio-economic position, marital status, place of work, heavy drinking, physical activity, body mass index and physician-diagnosed depression. In multi-level logistic regression models adjusted for all the covariates, the odds for being a non-smoker at follow-up were 1.26 [95% confidence interval (CI)=1.03-1.55] times higher for baseline smokers who reported high individual-level social capital than for their counterparts with low social capital. In an analysis stratified by socio-economic position, a significant association between individual-level social capital and smoking cessation was observed in the high socio-economic group [odds ratio (OR) (95% CI)=1.63 (1.01-2.63)], but not in intermediate [(OR=1.10 (0.83-1.47)] or low socio-economic groups [(OR=1.28 (0.86-1.91)]. Work unit-level social capital was not associated with smoking cessation. If the observed associations are causal, these findings suggest that high perceived social capital at work may facilitate smoking cessation among smokers in higher-status jobs.

An Integrated Safety Analysis Methodology for Emerging Air Transport Technologies

Science.gov (United States)

Kostiuk, Peter F.; Adams, Milton B.; Allinger, Deborah F.; Rosch, Gene; Kuchar, James

1998-01-01

The continuing growth of air traffic will place demands on NASA's Air Traffic Management (ATM) system that cannot be accommodated without the creation of significant delays and economic impacts. To deal with this situation, work has begun to develop new approaches to providing a safe and economical air transportation infrastructure. Many of these emerging air transport technologies will represent radically new approaches to ATM, both for ground and air operations.

"Should I tell my employer and coworkers I have arthritis?" A longitudinal examination of self-disclosure in the work place.

Science.gov (United States)

Gignac, Monique A M; Cao, Xingshan

2009-12-15

To examine arthritis self-disclosure at work, factors associated with disclosure, and prospective relationships of self-disclosure and work place support with changes to work place interactions, work transitions, and work place stress. Using a structured questionnaire, participants with osteoarthritis or inflammatory arthritis were interviewed at 4 time points, 18 months apart. At time 1, all participants (n = 490; 381 women, 109 men) were employed. Of the entire sample, 71% were retained throughout the study. Respondents were recruited using community advertising and from rheumatology and rehabilitation clinics. Self-disclosure and perceived support from managers and coworkers was assessed, as well as demographic, illness, work-context, and psychological variables. Generalized estimating equations modeled associations of disclosure and support on changes at work (e.g., job disruptions, work place stress). At each time point, 70.6-76.6% of participants had self-disclosed arthritis to their manager and 85.2-88.1% had told a coworker. Intraindividual variability in disclosure was considerable. Factors associated with self-disclosure were often inconsistent over time, with the exception of variables assessing the need to self-disclose (e.g., activity limitations) and perceived coworker support. Self-disclosure was not associated with changes to work. However, coworker support was related to fewer job disruptions, help with work tasks, and being less likely to reduce hours. Perceived managerial support was associated with less work place stress. Greater awareness is needed about issues related to self-disclosing arthritis at work. This study emphasizes the importance of a supportive work place, especially supportive coworkers, in decisions to discuss arthritis at work and in changes to work that might enable people to remain employed.

Working characteristics of variable intake valve in compressed air engine.

Science.gov (United States)

Yu, Qihui; Shi, Yan; Cai, Maolin

2014-01-01

A new camless compressed air engine is proposed, which can make the compressed air energy reasonably distributed. Through analysis of the camless compressed air engine, a mathematical model of the working processes was set up. Using the software MATLAB/Simulink for simulation, the pressure, temperature, and air mass of the cylinder were obtained. In order to verify the accuracy of the mathematical model, the experiments were conducted. Moreover, performance analysis was introduced to design compressed air engine. Results show that, firstly, the simulation results have good consistency with the experimental results. Secondly, under different intake pressures, the highest output power is obtained when the crank speed reaches 500 rpm, which also provides the maximum output torque. Finally, higher energy utilization efficiency can be obtained at the lower speed, intake pressure, and valve duration angle. This research can refer to the design of the camless valve of compressed air engine.

Effect of streamer plasma air purifier on sbs symptoms and performance of office work

DEFF Research Database (Denmark)

Zhang, X.J.; Fang, Lei; Wargocki, Pawel

2011-01-01

Subjective experiments were conducted to evaluate the effect of a streamer plasma air purifier on perceived air quality, SBS symptoms and performance of office work during 5-hour exposure of 32 recruited subjects in field laboratory in which real materials were used to establishing a realistic...... level of air pollution. Intensity of SBS symptoms were indicated using visual-analogue scales. Subjects’ performance was evaluated with several computer tasks. The results show that operation of the air purifiers improved perceived air quality and reduced the odor intensity of indoor air. Eye dryness...... symptom was found significantly improved when the air purifiers were used but no other SBS symptoms or performance of office work were improved when the air purifiers were in operation compared to the condition when they were off....

Working Characteristics of Variable Intake Valve in Compressed Air Engine

Science.gov (United States)

Yu, Qihui; Shi, Yan; Cai, Maolin

2014-01-01

A new camless compressed air engine is proposed, which can make the compressed air energy reasonably distributed. Through analysis of the camless compressed air engine, a mathematical model of the working processes was set up. Using the software MATLAB/Simulink for simulation, the pressure, temperature, and air mass of the cylinder were obtained. In order to verify the accuracy of the mathematical model, the experiments were conducted. Moreover, performance analysis was introduced to design compressed air engine. Results show that, firstly, the simulation results have good consistency with the experimental results. Secondly, under different intake pressures, the highest output power is obtained when the crank speed reaches 500 rpm, which also provides the maximum output torque. Finally, higher energy utilization efficiency can be obtained at the lower speed, intake pressure, and valve duration angle. This research can refer to the design of the camless valve of compressed air engine. PMID:25379536

Working Characteristics of Variable Intake Valve in Compressed Air Engine

Directory of Open Access Journals (Sweden)

Qihui Yu

2014-01-01

Full Text Available A new camless compressed air engine is proposed, which can make the compressed air energy reasonably distributed. Through analysis of the camless compressed air engine, a mathematical model of the working processes was set up. Using the software MATLAB/Simulink for simulation, the pressure, temperature, and air mass of the cylinder were obtained. In order to verify the accuracy of the mathematical model, the experiments were conducted. Moreover, performance analysis was introduced to design compressed air engine. Results show that, firstly, the simulation results have good consistency with the experimental results. Secondly, under different intake pressures, the highest output power is obtained when the crank speed reaches 500 rpm, which also provides the maximum output torque. Finally, higher energy utilization efficiency can be obtained at the lower speed, intake pressure, and valve duration angle. This research can refer to the design of the camless valve of compressed air engine.

No place for their children:

DEFF Research Database (Denmark)

Nielsen, Helene Pristed

2018-01-01

Drawing on a combination of theories on gender and place and work after globalisation, this article addresses how gender, place, employment-related mobility and flexible work conditions affect generational ties to place. Interviews with persons whose working life histories (by choice or circumsta......Drawing on a combination of theories on gender and place and work after globalisation, this article addresses how gender, place, employment-related mobility and flexible work conditions affect generational ties to place. Interviews with persons whose working life histories (by choice...... or circumstance) include flexible hours and high levels of mobility reveal explicit hopes that their children will have more stable working lives – and expectations that this will mean that they shall have to leave the local area. The article documents how the local place is an important component...

Evaluation of work place stress in health university workers: a study from rural India.

Science.gov (United States)

Mishra, Badrinarayan; Mehta, Sc; Sinha, Nidhi Dinesh; Shukla, Sushil Kumar; Ahmed, Nadeem; Kawatra, Abhishek

2011-01-01

Healthcare providers being over-worked and under staffed are prone to poor mental health. Unhealthy work place compounds it further. This study was aimed at to assess the mental health status of a medical university employee with special reference to work place stressors. A cross-sectional study was designed and carried out at a Rural Health University. Both the General Health Questionnaire (GHQ)-12 and Holmes-Rahe Scale were used to evaluate 406 participants. Multivariate analysis, correlation, and ANOVA by SPSS 11.0. The minimum age of the participant was 19 years and the maximum 64 years, with an average age at 35.09 years. On the GHQ scale 239(58.9%) recorded psychiatric morbidity out of which 201(49.5%) had moderate and 38(9.3%) severe morbidity. Doctors were the highest stressed group (P ≤ 0.04). Prominent work environmental stressors were poor departmental reorganization, lack of cohesiveness in department, difficult superiors and juniors (P ≤ 0.001, Pearson correlation). Stressors associated with work organization and work nature were: noninvolvement in departmental decision making and lack of proper feedback; along with; work load, lack of clarity in job, and a erratic work schedule (P ≤ 0.001 on Pearson correlation). Harassment, favoritism, discrimination, and lack of self-expression (P ≤ 0.003) were other factors responsible for work dissatisfaction. A high stress level was detected in the study population. The principal stressors were work environment related. Poor work culture was found to lead to job dissatisfaction among majority.

Effect of ventilation type on radon concentration at places of work

International Nuclear Information System (INIS)

Oksanen, E.

1994-01-01

Indoor radon ( 222 Rn) concentrations were measured at 76 child care facilities and 36 schools in southern Finland. The buildings had three different types of ventilation systems: mechanical air supply and exhaust, mechanical exhaust, and natural ventilation, the first being most common. The effect of the ventilation type on the long-term radon concentration was studied in child care facilities. The radon concentrations were highest in the naturally ventilated buildings. The mechanical air supply and exhaust system maintained the lowest values in cold wintertime. In school buildings both the long-term radon concentration and short-term radon and daughter concentrations were measured. The correlation of the ventilation type and the radon concentration was not obvious in this group of measurements, but the radon concentrations and the equilibrium factors were highest in buildings with natural ventilation. Radon concentrations were generally lower during the working hours than during the one-month period, as expected. (author)

Radiofrequency radiation: safe working practices in the Royal Australian Air Force

International Nuclear Information System (INIS)

Joyner, K.H.; Stone, K.R.

1988-01-01

The Royal Australian Air Force (RAAF) has long recognised the value of its work force and the need to preserve their health and wellbeing to achieve operational objectives. The Directorate of Air Force Safety (DAFS) is required by the Chief of the Air Staff to take all measures possible to prevent accidents and incidents in the RAAF, under the provisions of the Defence Instruction, 'Air Force Safety and Occupational Health Policy'. Consequently, the RAAF has exercised a pragmatic approach to radiofrequency radiation (RFR) and has always adopted and implemented strict exposure standards. DAFS receives technical advice on RFR from the Directorate of Telecommunications Engineering (DTELENG) and on occupational health from the Directorate General of Air Force Health Services (DGAFHS)

Design of ventilation and air cleaning systems for the new Los Alamos Plutonium Facility

International Nuclear Information System (INIS)

Mitchell, R.; DeField, J.; Stafford, R.; McNeese, W.; Eberhardt, W.; Laushkin, N.

1975-01-01

The Los Alamos Scientific Laboratory's new plutonium facility will conform to AECM Appendix 6301-Part II, Section H-Minimum Design Criteria for New Plutonium Facilities. The glove box process exhaust air is filtered through three or four stages of HEPA filters. The design of this multi-stage filter installation is shown with a method of in-place testing of each stage individually. A glove box filter holder and the in-place test procedure is described. General room air from plutonium work areas is recirculated at the rate of eight air changes per hour with a 10 percent fresh air make-up. The filter plenums for the recirculated air are designed to permit in-place testing of each of the two filter stages. (U.S.)

Sexual harassment among females in working place at Dhangadhi municipality Kailali, District of Nepal

OpenAIRE

Lal Bahadur Kunwar; Bir Bahadur Kunwar; Poshan Thapa; Ishor Sharma; Shankar Singh Dhami; Lalit Jung Rokaya

2014-01-01

Sexual harassment is a challenging issue where women and men work together. It is being recognized as a violation of human rights and human dignity which undermines the equality of opportunity and treatment between men and women. So, this descriptive study was conducted in Dhangadhi Municipality Kailali District, Nepalto find out the experience of sexual harassment in female at working place. Only female respondents who were working in office were taken purposively from four sectors such as g...

Situating mental health work in place: Qualitative findings from interviews with Veterans in Southeastern Louisiana and Northern California.

Science.gov (United States)

Abraham, Traci H; Koenig, Christopher J; Zamora, Kara; Hill, Coleen; Uddo, Madeline; Kelly, Adam P; Hamilton, Michelle F; Curran, Geoffrey M; Pyne, Jeffrey M; Seal, Karen H

2017-09-01

Most chronic illness management occurs outside clinics and hospitals, in the everyday lives of individuals. We use data from semi-structured interviews with 37 veterans from Southeastern Louisiana and Northern California to illustrate how "health work" for mental health concerns are shaped by place. Using health work as an orienting concept for analysis, we discerned variation between the two study sites in how Veterans used interacting with the natural environment, cultivating time alone, and religious practice to manage their mental health and well-being. Through these findings, we advocate for a situated notion of health work that is mindful of how health-related behaviors are shaped by place and the attributes that constitute place. Published by Elsevier Ltd.

Optimization of recirculating laminar air flow in operating room air conditioning systems

Directory of Open Access Journals (Sweden)

Enver Yalcin

2016-04-01

Full Text Available The laminar flow air-conditioning system with 100% fresh air is used in almost all operating rooms without discrimination in Turkey. The laminar flow device which is working with 100% fresh air should be absolutely used in Type 1A operating rooms. However, there is not mandatory to use of 100% fresh air for Type 1B defined as places performed simpler operation. Compared with recirculating laminar flow, energy needs of the laminar flow with 100 % fresh air has been emerged about 40% more than re-circulated air flow. Therefore, when a recirculating laminar flow device is operated instead of laminar flow system with 100% fresh air in the Type 1B operating room, annual energy consumption will be reduced. In this study, in an operating room with recirculating laminar flow, optimal conditions have been investigated in order to obtain laminar flow form by analyzing velocity distributions at various supply velocities by using computational fluid dynamics method (CFD.

"From this place and of this place:" climate change, sense of place, and health in Nunatsiavut, Canada.

Science.gov (United States)

Cunsolo Willox, Ashlee; Harper, Sherilee L; Ford, James D; Landman, Karen; Houle, Karen; Edge, Victoria L

2012-08-01

As climate change impacts are felt around the globe, people are increasingly exposed to changes in weather patterns, wildlife and vegetation, and water and food quality, access and availability in their local regions. These changes can impact human health and well-being in a variety of ways: increased risk of foodborne and waterborne diseases; increased frequency and distribution of vector-borne disease; increased mortality and injury due to extreme weather events and heat waves; increased respiratory and cardiovascular disease due to changes in air quality and increased allergens in the air; and increased susceptibility to mental and emotional health challenges. While climate change is a global phenomenon, the impacts are experienced most acutely in place; as such, a sense of place, place-attachment, and place-based identities are important indicators for climate-related health and adaptation. Representing one of the first qualitative case studies to examine the connections among climate change, a changing sense of place, and health in an Inuit context, this research draws data from a multi-year community-driven case study situated in the Inuit community of Rigolet, Nunatsiavut, Canada. Data informing this paper were drawn from the narrative analysis of 72 in-depth interviews conducted from November 2009 to October 2010, as well as from the descriptive analysis of 112 questionnaires from a survey in October 2010 (95% response rate). The findings illustrated that climate change is negatively affecting feelings of place attachment by disrupting hunting, fishing, foraging, trapping, and traveling, and changing local landscapes-changes which subsequently impact physical, mental, and emotional health and well-being. These results also highlight the need to develop context-specific climate-health planning and adaptation programs, and call for an understanding of place-attachment as a vital indicator of health and well-being and for climate change to be framed as an

Programmes for tobacco and alcohol users in Australian work-places.

Science.gov (United States)

Richmond, R; Heather, N; Holt, P

1996-12-01

This article presents findings from a survey of programmes available for tobacco and alcohol users working in 455 of Australia's top 600 companies. Companies were twice as likely to have programmes for smokers (43%) as for problem drinkers (24%) and these programmes were more apparent in large companies. The majority of programmes for smoking were delivered within a health promotion context which included other life-style issues, such as nutrition, exercise, weight management and stress management. Although Employee Assistance Programs (EAPs) were the most commonly available type of work-place programme for excessive drinkers and other drug users, followed by Alcoholics Anonymous and local hospital clinics, only 6% had an EAP for alcohol. Only 21% of programmes for smokers and 12% for excessive alcohol users were evaluated. Around one-quarter of companies knew the costs of smoking programmes, and 9% reported costs of conducting programmes for excessive alcohol consumers.

Evaluation of Work Place Stress in Health University Workers: A Study from Rural India

Science.gov (United States)

Mishra, Badrinarayan; Mehta, SC; Sinha, Nidhi Dinesh; Shukla, Sushil Kumar; Ahmed, Nadeem; Kawatra, Abhishek

2011-01-01

Background: Healthcare providers being over-worked and under staffed are prone to poor mental health. Unhealthy work place compounds it further. Aims: This study was aimed at to assess the mental health status of a medical university employee with special reference to work place stressors. Settings and design: A cross-sectional study was designed and carried out at a Rural Health University. Materials and Methods: Both the General Health Questionnaire (GHQ)-12 and Holmes–Rahe Scale were used to evaluate 406 participants. Statistical analysis: Multivariate analysis, correlation, and ANOVA by SPSS 11.0. Results: The minimum age of the participant was 19 years and the maximum 64 years, with an average age at 35.09 years. On the GHQ scale 239(58.9%) recorded psychiatric morbidity out of which 201(49.5%) had moderate and 38(9.3%) severe morbidity. Doctors were the highest stressed group (P ≤ 0.04). Prominent work environmental stressors were poor departmental reorganization, lack of cohesiveness in department, difficult superiors and juniors (P ≤ 0.001, Pearson correlation). Stressors associated with work organization and work nature were: noninvolvement in departmental decision making and lack of proper feedback; along with; work load, lack of clarity in job, and a erratic work schedule (P ≤ 0.001 on Pearson correlation). Harassment, favoritism, discrimination, and lack of self-expression (P ≤ 0.003) were other factors responsible for work dissatisfaction. Conclusions: A high stress level was detected in the study population. The principal stressors were work environment related. Poor work culture was found to lead to job dissatisfaction among majority. PMID:21687380

Evaluation of work place stress in health university workers: A study from rural India

Directory of Open Access Journals (Sweden)

Badrinarayan Mishra

2011-01-01

Full Text Available Background: Healthcare providers being over-worked and under staffed are prone to poor mental health. Unhealthy work place compounds it further. Aims: This study was aimed at to assess the mental health status of a medical university employee with special reference to work place stressors. Settings and design: A cross-sectional study was designed and carried out at a Rural Health University. Materials and Methods: Both the General Health Questionnaire (GHQ-12 and Holmes-Rahe Scale were used to evaluate 406 participants. Statistical analysis: Multivariate analysis, correlation, and ANOVA by SPSS 11.0. Results: The minimum age of the participant was 19 years and the maximum 64 years, with an average age at 35.09 years. On the GHQ scale 239(58.9% recorded psychiatric morbidity out of which 201(49.5% had moderate and 38(9.3% severe morbidity. Doctors were the highest stressed group (P ≤ 0.04. Prominent work environmental stressors were poor departmental reorganization, lack of cohesiveness in department, difficult superiors and juniors (P ≤ 0.001, Pearson correlation. Stressors associated with work organization and work nature were: noninvolvement in departmental decision making and lack of proper feedback; along with; work load, lack of clarity in job, and a erratic work schedule (P ≤ 0.001 on Pearson correlation. Harassment, favoritism, discrimination, and lack of self-expression (P ≤ 0.003 were other factors responsible for work dissatisfaction. Conclusions: A high stress level was detected in the study population. The principal stressors were work environment related. Poor work culture was found to lead to job dissatisfaction among majority.

Using cold battery with icy water as an alternative method of air ...

African Journals Online (AJOL)

The aim of this work is to reduce the energy consumption of a passenger ship by using an air conditioning system with a solar energy source. This technique is applied on ships with a cold room with a refrigeration unit. The work consists of using a central air conditioning system for which a heat exchanger is placed in the ...

The air's got to be far cleaner here: a discursive analysis of place-identity threat.

Science.gov (United States)

Hugh-Jones, Siobhan; Madill, Anna

2009-12-01

That talk is never disinterested complicates the relationship between the environment and the claims people make about it. Talk about place, and one's self in it, is particularly complex when the environment poses risk or is otherwise problematized. This study, a secondary analysis of interview data, seeks to extend discursive work on place-identity by examining the ways in which 14 residents of a small English village talk about themselves and their locale. The locale accommodates an active quarry, and many residents had lodged complaints to the quarry about dust, noise and vibrations from blasting. Attention to the interactional context of the interviews illustrates the ways in which (simply) interviewing people about their locale can threaten self- and place-identity. When asked about life in the village, interviewees oriented to two main dilemmas in protecting self- and place-identity: (1) how to justify continued residence in a challenging environment and (2) how to complain about the locale whilst maintaining positive place-identity. Discursive responses to these dilemmas drew upon typical identity processes, such as self- and place distinctiveness and the formulation of out-groups, as well as upon constructions of localized power-sharing and morally obligated tolerance of risk. We suggest that research on problematical places, and of environmental risk, needs to be sensitized to how it may constitute a threat to self- and place-identity, and how this may mediate formulations self and place, as well as of environmental risk.

MICROBIOLOGICAL CHARACTERISTICS OF THE AIR BLOWN BY WARM AIR HAND DRYERS

Directory of Open Access Journals (Sweden)

Recai OÐUR; Omer Faruk TEKBAS; Osman HANCI; Umut OZCAN

2005-02-01

Full Text Available The aim of the study was to determine the microbiological characteristics of air blown from warm air hand dryers, and to compare findings with the microbiological characteristics of indoor air in which the dryer settled. Air samples was taken from different public places (shopping centers, restaurants and hospitals and investigated for total viable counts, coagulase negative Staphylococcus, E. Coli, Staphylococcus aureus and enteric pathogens. There were differences between sampling indoor places for some of the microorganisms, but all of the air samples taken from dryers contained more microorganisms than indoor air, and the differences between hand dryers and indoor air were statistically significant (p<0.05 except for enteric pathogens. As a result it could be said that warm air hand dryers could be microbiological contamination sources in restrooms or the other places that they are used. [TAF Prev Med Bull 2005; 4(1.000: 1-7

WORKING FOR GOD’S LOVE AND A PLACE IN HEAVEN

Directory of Open Access Journals (Sweden)

Virginia Ávila-García

2014-07-01

Full Text Available This paper is on how auxiliar numeraries, hundreds of women working for the Opus Dei in Mexico, dedicate their efforts and lives to that organization under the promise to get a place in heaven,…and a very small income. They are a vulnerable group, coming from the poor countryside or marginal city’s neighborhoods, and/or with an indigenous community’s background. They are trained to love God through the “charisma”, a set of rules and beliefs that helps them transit a life’s plan to seek their way to heaven. They work confident that following this path they will find salvation, meanwhile they take care of the Opus Dei’s centers, performing activities such as housecleaning. In exchange for their work they earn a salary, that doesn’t go further than their basic needs. Being the organization’s finances something unclear, it is hard to establish whether they could have been used as “cheap labour”. Opus Dei’s executives claim that the organization is deficietary because of all the social work they do; therefore, and that they can only pay a very restricted wage to these women. Based on interviews, fieldwork, bibliography and on-line research, the article shows how that claim may not be correct, and that some kind of rights violations are behind the relationship between the Opus Dei - auxiliar numeraries.

Compressed Air Working in Chennai During Metro Tunnel Construction: Occupational Health Problems.

Science.gov (United States)

Kulkarni, Ajit C

2017-01-01

Chennai metropolis has been growing rapidly. Need was felt of a metro rail system. Two corridors were planned. Corridor 1, of 23 km starting from Washermanpet to Airport. 14.3 km of this would be underground. Corridor 2, of 22 km starting from Chennai Central Railway station to St. Thomas Mount. 9.7 km of this would be underground. Occupational health centre's role involved selection of miners and assessing their fitness to work under compressed air. Planning and execution of compression and decompression, health monitoring and treatment of compression related illnesses. More than thirty five thousand man hours of work was carried out under compressed air pressure ranged from 1.2 to 1.9 bar absolute. There were only three cases of pain only ( Type I) decompression sickness which were treated with recompression. Vigilant medical supervision, experienced lock operators and reduced working hours under pressure because of inclement environmental conditions viz. high temperature and humidity, has helped achieve this low incident. Tunnelling activity will increase in India as more cities will soon opt for underground metro railway. Indian standard IS 4138 - 1977 " Safety code for working in compressed air" needs to be updated urgently keeping pace with modern working methods.

Good practices in managing work-related indoor air problems: a psychosocial perspective.

Science.gov (United States)

Lahtinen, Marjaana; Huuhtanen, Pekka; Vähämäki, Kari; Kähkönen, Erkki; Mussalo-Rauhamaa, Helena; Reijula, Kari

2004-07-01

Indoor air problems at workplaces are often exceedingly complex. Technical questions are interrelated with the dynamics of the work community, and the cooperation and interaction skills of the parties involved in the problem solving process are also put to the test. The objective of our study was to analyze the process of managing and solving indoor air problems from a psychosocial perspective. This collective case study was based on data from questionnaires, interviews and various documentary materials. Technical inspections of the buildings and indoor air measurements were also carried out. The following four factors best differentiated successful cases from impeded cases: extensive multiprofessional collaboration and participative action, systematic action and perseverance, investment in information and communication, and process thinking and learning. The study also proposed a theoretical model for the role of the psychosocial work environment in indoor air problems. The expertise related to social and human aspects of problem solving plays a significant role in solving indoor air problems. Failures to properly handle these aspects may lead to resources being wasted and result in a problematic situation becoming stagnant or worse. Copyright 2004 Wiley-Liss, Inc.

Seeing the city: photography as a place of work

DEFF Research Database (Denmark)

Altamirano-Allende, Carlo; Selin, Cynthia Lea

2016-01-01

was the use of photography as the place of work where the citizen-photographers created a visual language to grant meaning and structure to their experience and deliberations. Drawing on Barthe’s (1980) idea of semiology as a construction of meaning through the exploration and identification of systematic...... regularities of signs and objects, as well on Benjamin’s (1999) notion that there is no photography without discourse, this paper demonstrates what these individuals see as their relationship to their city as portrayed through photographic observations. This paper aims to empirically illustrate the uses...... better understanding pathways to sustainability. To do so, we conducted a visual ethnography of the participants’ photographic images and captions. By pushing the boundaries of photography beyond an artistic practice into the realm of public engagement, we demonstrate the ways in which “a camera...

From crisis to development--analysis of air traffic control work processes.

Science.gov (United States)

Teperi, Anna-Maria; Leppänen, Anneli

2011-03-01

In this study an intervention to improve work processes in air traffic control (ATC) is evaluated. The background was the Finnish air traffic controllers' strike of 1999. The old ways of thinking and acting did not support development of ATC prompting a need for a new kind of working culture in the organisation. Several actions were started. In one of these, ATC work processes were modelled by personnel and development plans concerning work were delivered to top management. Different actors (management, trade union, stakeholders) were interviewed before (n=16) and after the project (n=7). The intervention supported systematic co-operation between different actors in the organisation. However, a follow-up revealed that only a few participants had adopted the idea of continuous work development. Mastery of human factors is crucial in a high reliability work environment such as ATC. But how is the analytical and co-operative aspect kept alive in an organisation that is run by strict international regulation and has a strong technical competence, but is not that strong in collaborative and human aspects? Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Protecting air basins from harmful discharges

Energy Technology Data Exchange (ETDEWEB)

Yankovskiy, S S

1983-01-01

The work is a brief description of the content of the reports delivered at the seminar entitled Protecting the Air Basin from Harmful Discharges of the Machine Building Enterprises, which took place at the All Union Exhibit of the Achievements of the National Economy of the USSR (VDNKh) in 1982. Representatives of different ministries and agencies, scientific research institutes (NII), planning and design and other specialized organizations, institutes of higher learning (vuz) and enterprises from different branches of industry took part in the work of the seminar. The seminar noted measures to eliminate deficiencies which occur in individual enterprises of the branch and measures to improve the work to improve protection of the air basin from harmful discharges of machine building enterprises.

The development and validation of an ergonomics index for assessing tractor operator work place

Directory of Open Access Journals (Sweden)

Juan Paulo Barbieri

2018-02-01

Full Text Available ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996, which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015 and ABNT NBR ISO 4252 (2011, which regulate the access to operator workplaces; and NR 12 (2010, which determines the mandatory items of operator workplaces.Thirty-four operator work places of 152 models of new agricultural tractors sold in the Brazilian market were analyzed in this study. Ergonomics index was developed and validated using these standards, and the findings enabled the ranking of agricultural tractors. Therefore, the proposed ergonomics index proved feasible and may be applied to other agricultural machines.

A Lithium-Air Battery Stably Working at High Temperature with High Rate Performance.

Science.gov (United States)

Pan, Jian; Li, Houpu; Sun, Hao; Zhang, Ye; Wang, Lie; Liao, Meng; Sun, Xuemei; Peng, Huisheng

2018-02-01

Driven by the increasing requirements for energy supply in both modern life and the automobile industry, the lithium-air battery serves as a promising candidate due to its high energy density. However, organic solvents in electrolytes are likely to rapidly vaporize and form flammable gases under increasing temperatures. In this case, serious safety problems may occur and cause great harm to people. Therefore, a kind of lithium-air that can work stably under high temperature is desirable. Herein, through the use of an ionic liquid and aligned carbon nanotubes, and a fiber shaped design, a new type of lithium-air battery that can effectively work at high temperatures up to 140 °C is developed. Ionic liquids can offer wide electrochemical windows and low vapor pressures, as well as provide high thermal stability for lithium-air batteries. The aligned carbon nanotubes have good electric and heat conductivity. Meanwhile, the fiber format can offer both flexibility and weavability, and realize rapid heat conduction and uniform heat distribution of the battery. In addition, the high temperature has also largely improved the specific powers by increasing the ionic conductivity and catalytic activity of the cathode. Consequently, the lithium-air battery can work stably at 140 °C with a high specific current of 10 A g -1 for 380 cycles, indicating high stability and good rate performance at high temperatures. This work may provide an effective paradigm for the development of high-performance energy storage devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Application of Work Domain Analysis to Defining Australia’s Air Combat Capability

Science.gov (United States)

2014-03-01

Capability. References Brady, A., Naikar, N., & Treadwell, A. (2013). Organisational storytelling with work domain analysis: Case study of air power...UNCLASSIFIED 20 Brady, A., Naikar, N., & Treadwell, A. (2013). Organisational storytelling with work domain analysis: Case study of air power doctrine and...maturity model? A framework of general design principles for maturity model and its demonstration in business process management. Proceedings of the

Design, build, and test an air-cleaning system for working-level control in uranium mines. Open file report October 1979-April 1984

International Nuclear Information System (INIS)

Schroeder, W.E.; Muldoon, T.L.; Babbitt, C.

1984-06-01

The health hazard from 222 radon byproducts, radon daughters, will be increasingly difficult to control by dilution with primary ventilation as the uranium industry digs farther and deeper for ore of diminishing grade. One solution is removal of daughters from air at the work place by filtering out respirable-size dust particles to which most daughters attach. This report describes design and testing of a filtration unit that reduces the working level in ventilating air 95% on an airflow of 10,000 cfm. Buildup of dust on the filter is controlled by periodic back-pulsing, so that the unit can operate for an extended period without changing elements. The effectiveness of the self-cleaning action was satisfactory under a contaminant loading that was 43% diesel smoke. Back-pulsing was able to control filter loading or buildup to a degree even under 100% diesel. The report describes testing of the filter medium and filter unit in both an experimental and an active mine and concludes with an analysis of the prototype design

Stress at the place of work and cognitive functions among women performing intellectual work during peri- and post-menopausal period.

Science.gov (United States)

Gujski, Mariusz; Pinkas, Jarosław; Juńczyk, Tomasz; Pawełczak-Barszczowska, Adrianna; Raczkiewicz, Dorota; Owoc, Alfred; Bojar, Iwona

2017-10-06

The analysis of the relationship between stress at work and results of cognitive functions amongst women, at peri- and post-menopausal age, performing intellectual work. The study group included women, aged 45-66 years old, employed as intellectual workers. Research instruments were: the Montreal Cognitive Assessment; computer tests of the CNS Vital Signs; the Subjective Work Characteristics Questionnaire, and a questionnaire designed by the author. The results were statistically analyzed. Nearly a half of respondents experienced high stress at the place of work; 1/3 - on the average level, on a low level - every fifth. The largest number of respondents experienced stress caused by social contacts. Among a half of the women, stress was caused by the lack of awards at work, followed by the lack of support. Slightly fewer of them experienced stress caused by the feeling of psychological load related to the complexity of work or the feeling of uncertainty caused by the organization of work. Every third woman experienced stress due to the sense of responsibility or the lack of control. The smallest number experienced stress caused by physical arduousness, the sense of threat and unpleasant working conditions. The examined women obtained the best results with respect to simple attention, the worst results - with respect to the reaction time. The results concerning the remaining 9 cognitive functions were ranked in the middle of the aforementioned results. The intensity of stress at work and factors which caused this stress, negatively correlated with simple attention of women in the early peri-menopausal period, while positively correlating with the psychomotor and processing speed of women in the late peri-menopausal period. Among the post-menopausal women, negative correlations were observed between the majority of cognitive functions and the intensity of stress at work, and the majority of factors which caused this stress. Cognitive functions of the examined women

Determination of the air attenuation and electronic loss for the free air concentric cylinders ionization chamber

International Nuclear Information System (INIS)

Oliveira, Hebert Pinto Silveira de

2010-01-01

Along the latest years, the LNMRI has been proceeding a continuous research work with a concentric cylinders type free air ionizing chamber (VICTOREEN, model 481), aiming to establish it as a new national standard, and, as a consequence, replace the worldwide accepted secondary standard, calibrated by PTB. Taking into account that the absolute determination of kerma in air with a free air ionizing chamber implies the acquirement of a number of correction factors. The main objective of the present work comprises the determination of the two factors, specifically, electronic loss (k e ) and air attenuation (k a ). The correction factors were obtained through mammography qualities reference spectrum, using Monte Carlo simulation method. The Penelope code was used in the simulation procedures. Simulations took place in two stages, the acquirement of specters related to the qualities of interest (mammography) with the x ray tube (Pantak, model HF160 e Panalytical, model XRF window), and the free-air ionization chamber. The data were compared to those related to the BIPM chamber, to electronic loss were not detected. The comparison between air attenuation factors was obtained data bellow 0.13%. (author)

Imperialist air war: East German academic research and memory politics reflected in the work of Olaf Groehler

NARCIS (Netherlands)

von Benda-Beckmann, B.; Schmitz, H.; Seidel-Arpacı, A.

2011-01-01

This chapter analyses the work of GDR historians on the air war and the Allied bombing campaign, particularly the work of Olaf Groehler, the leading GDR expert on the air war. The chapter situates Groehler's work within official GDR memory politics and explores Groehler's work as an attempt to

Sexual harassment among females in working place at Dhangadhi municipality Kailali, District of Nepal

Directory of Open Access Journals (Sweden)

Lal Bahadur Kunwar

2014-05-01

Full Text Available Sexual harassment is a challenging issue where women and men work together. It is being recognized as a violation of human rights and human dignity which undermines the equality of opportunity and treatment between men and women. So, this descriptive study was conducted in Dhangadhi Municipality Kailali District, Nepalto find out the experience of sexual harassment in female at working place. Only female respondents who were working in office were taken purposively from four sectors such as government sectors, Company, Government and Public School and NGOs/INGOs for the study by using pre-structured interview schedules. From each sectors 25% of the total female respondents which was 23 people were selected. Data were collected on the basis of first come first take method till the required number was achieved. The study was conducted among 92 respondents. It was observed that women workers were victimized by all form of sexual harassment such as verbal (56.3%, physical (16.9%, Written or Graphical(11.3%, gesture(8.5% and emotional(7.0% form of sexual harassment. Co-workers (52.1% are the major harassers to the women workers. Among 92 respondents, 71(77.2% respondents were facing sexual harassment at working place and major cause of sexual harassment was (36.9% power and position of male but they often ignore the incidence. Female workers are very much vulnerable to sexual harassment by their male co‐workers, immediate Supervisor and manager. It negatively impacts their performance in work, mental and physical health, their human right and dignity.

Electronic air cleaners and the indoor environment

International Nuclear Information System (INIS)

Krafthefer, B.

1986-01-01

The growing awareness over the quality of air in the indoor environment is driving the search for effective control methods for the contaminants of concern. Electronic air cleaners can control such pollutants as dust, pollen, tobacco smoke, radon decay products, and other particulates. This paper presents an examination of the various types of electronic air cleaners and their effects on indoor pollutants. It also examines the mechanism for contaminant removal, the relationship of the efficiency to the characteristics of the contaminant, and what type of contaminants can be controlled with the electronic air cleaner, with particular emphasis placed on the removal of radon decay products. From a study on radon product removal in residences, the electronic air cleaner was found to have an efficiency of up to 70%. Not only was there a reduction in the residential working level, but the fluctuations in the working level were also reduced. With this information, they can better understand how to solve the air treatment problem of the inhabited space. 17 references, 8 figures

Evaluation of working air quality by using semipermeable membrane devices

International Nuclear Information System (INIS)

Esteve-Turrillas, Francesc A.; Pastor, Agustin; Guardia, Miguel de la

2008-01-01

It has been evaluated the use of semipermeable membrane devices (SPMDs) as passive samplers of organophosphorus pesticides from air, in order to determine the contamination of working environments. Additionally, the use of SPMDs as portable samplers has been also considered. The analytical methodology for the determination of diazinon, chlorpyrifos-methyl, pirimiphos-methyl, chlorpyrifos and fenthion in SPMDs exposed to contaminated air was based on microwave-assisted extraction and gas chromatography with mass spectrometry determination. Limit of detection (LOD) values from 2 to 4 ng SPMD -1 and repeatability from 2 to 7% were obtained by using the aforementioned methodology. Theoretical calculated sampling rates were employed for the estimation of the pesticide concentration in air, by using the pesticide mass retained in the deployed SPMD. The obtained LOD values, for a sampling time of 7 days, were from 1 to 2 ng m -3 . The evaluation of the air quality of a pesticide laboratory with an intensive use of diazinon and chlorpyrifos has been made in order to check the operation safety conditions

Evaluation of working air quality by using semipermeable membrane devices

Energy Technology Data Exchange (ETDEWEB)

Esteve-Turrillas, Francesc A. [Analytical Chemistry Department, University of Valencia, Edifici Jeroni Munoz, 50 Dr. Moliner, 46100 Burjassot, Valencia (Spain); Pastor, Agustin [Analytical Chemistry Department, University of Valencia, Edifici Jeroni Munoz, 50 Dr. Moliner, 46100 Burjassot, Valencia (Spain)], E-mail: agustin.pastor@uv.es; Guardia, Miguel de la [Analytical Chemistry Department, University of Valencia, Edifici Jeroni Munoz, 50 Dr. Moliner, 46100 Burjassot, Valencia (Spain)

2008-09-19

It has been evaluated the use of semipermeable membrane devices (SPMDs) as passive samplers of organophosphorus pesticides from air, in order to determine the contamination of working environments. Additionally, the use of SPMDs as portable samplers has been also considered. The analytical methodology for the determination of diazinon, chlorpyrifos-methyl, pirimiphos-methyl, chlorpyrifos and fenthion in SPMDs exposed to contaminated air was based on microwave-assisted extraction and gas chromatography with mass spectrometry determination. Limit of detection (LOD) values from 2 to 4 ng SPMD{sup -1} and repeatability from 2 to 7% were obtained by using the aforementioned methodology. Theoretical calculated sampling rates were employed for the estimation of the pesticide concentration in air, by using the pesticide mass retained in the deployed SPMD. The obtained LOD values, for a sampling time of 7 days, were from 1 to 2 ng m{sup -3}. The evaluation of the air quality of a pesticide laboratory with an intensive use of diazinon and chlorpyrifos has been made in order to check the operation safety conditions.

How do people in different places experience different levels of air pollution? Using worldwide Chinese as a lens.

Science.gov (United States)

Chen, Bin; Song, Yimeng; Kwan, Mei-Po; Huang, Bo; Xu, Bing

2018-07-01

Air pollution, being especially severe in the fast-growing developing world, continues to post a threat to public health. Yet, few studies are capable of quantifying well how different groups of people in different places experience different levels of air pollution at the global scale. In this paper, we use worldwide Chinese as a lens to quantify the spatiotemporal variations and geographic differences in PM 2.5 exposures using unprecedented mobile phone big data and air pollution records. The results show that Chinese in South and East Asia suffer relatively serious PM 2.5 exposures, where the Chinese in China have the highest PM 2.5 exposures (52.8 μg/m 3 /year), which is fourfold higher than the exposures in the United States (10.7 μg/m 3 /year). Overall, the Chinese in Asian cities (35.5 μg/m 3 /year) experienced the most serious PM 2.5 exposures when compared with the Chinese in the cities of other continents. These results, partly presented as a spatiotemporally explicit map of PM 2.5 exposures for worldwide Chinese, help researchers and governments to consider how to address the effects of air pollution on public health with respect to different population groups and geographic locations. Copyright © 2018. Published by Elsevier Ltd.

Movable chromatemass-spectrometer for attestation of working places in oil-gas processing sector

International Nuclear Information System (INIS)

Nuriev, K.Z.; Kolesnikova, U.P.; Balayeva, A.A.

2005-01-01

Small capacity chromatomass-spectrometer (KhS) intended for defining chemical compound of the atmosphere weather in open and close locations for the purpose of attestation of working places in the oil gas production plants. Characteristics and parameters of all nodes of KhS, playing a certain part in realization of given device were given and based. Accounts and constructive parameters of concrete KhS and technical activities of developed device were actuated

An Investigation of Applications for Thermodynamic Work Potential Methods: Working Tables and Charts for Estimation of Thermodynamic Work Potential in Equilibrium Mixtures of Jet-A and Air

Science.gov (United States)

Mavris, Dimitri; Roth, Bryce; McDonald, Rob

2002-01-01

The objective of this report is to provide a tool to facilitate the application of thermodynamic work potential methods to aircraft and engine analysis. This starts with a discussion of the theoretical background underlying these methods, which is then used to derive various equations useful for thermodynamic analysis of aircraft engines. The work potential analysis method is implemented in the form of a set of working charts and tables that can be used to graphically evaluate work potential stored in high-enthalpy gas. The range of validity for these tables is 300 to 36,000 R, pressures between between 0.01 atm and 100 atm, and fuel-air ratios from zero to stoichiometric. The derivations and charts assume mixtures of Jet-A and air as the working fluid. The thermodynamic properties presented in these charts were calculated based upon standard thermodynamic curve fits.

MAK and BAT values list 2017. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2017. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

Energy Technology Data Exchange (ETDEWEB)

NONE

2017-08-01

The MAK and BAT values list 2017 includes the maximum permissible concentrations at the place of work and biological tolerance values for working materials. The following working materials are covered: carcinogenic working materials, sensitizing materials and aerosols. The report discusses the restriction of exposure peaks, skin resorption, MAK (maximum working place concentration) values during pregnancy, germ cell mutagens and specific working materials. Importance and application of BAT (biological working material tolerance) values, list of materials, carcinogens, biological guide values and reference values are also included.

MAK and BAT values list 2015. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2015. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-11-01

The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2015 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

MAK and BAT values list 2014. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2014. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-11-01

The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2014 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

MAK and BAT values list 2013. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2013. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-01

The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2013 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

Delayed-matching-to-place Task in a Dry Maze to Measure Spatial Working Memory in Mice.

Science.gov (United States)

Feng, Xi; Krukowski, Karen; Jopson, Timothy; Rosi, Susanna

2017-07-05

The delayed-matching-to-place (DMP) dry maze test is a variant of DMP water maze (Steele and Morris, 1999; Faizi et al. , 2012) which measures spatial working/episodic-like learning and memory that depends on both hippocampal and cortical functions (Wang and Morris, 2010; Euston et al. , 2012). Using this test we can detect normal aging related spatial working memory decline, as well as trauma induced working memory deficits. Furthermore, we recently reported that fractionated whole brain irradiation does not affect working memory in mice (Feng et al. , 2016). Here we describe the experimental setup and procedures of this behavioral test.

Examination of arthritis-related work place activity limitations and intermittent disability over four-and-a-half years and its relationship to job modifications and outcomes.

Science.gov (United States)

Gignac, Monique A M; Cao, Xingshan; Tang, Kenneth; Beaton, Dorcas E

2011-07-01

To examine the type, degree, and episodic nature of arthritis-related work place activity limitations and the consistency of the relationship of activity limitations to job modifications and work place outcomes. Using an interviewer-administered structured questionnaire, individuals with osteoarthritis (OA) or inflammatory arthritis (IA) were interviewed at 4 time points, 18 months apart. At baseline, all participants (n = 490; 381 women, 109 men) were employed. Respondents were recruited using community advertising and from rheumatology and rehabilitation clinics. The Workplace Activity Limitations Scale (WALS) assessed arthritis-related disability with job tasks. Job modifications/accommodations (e.g., scheduling changes), work place outcomes (e.g., absenteeism), demographics, illness, and work context were also measured. Repeated cross-sectional logistic regressions examined levels of WALS disability with job modifications and outcomes at each time point. Similar levels of activity limitations were found comparing OA and IA with fewer difficulties with global aspects of work (e.g., scheduling) than with specific tasks (e.g., working with hands). Three-quarters of the participants had episodic or intermittent WALS difficulty over time. Medium and high levels of work place activity limitations were significantly associated with job modifications, and high WALS difficulty was consistently related to negative work outcomes. Many individuals with arthritis report some difficulty with work place activities. However, these difficulties are often intermittent and may not result in changes to work productivity until they are consistently high. This is important for designing work place interventions and for employers, insurers, and the government to understand to avoid viewing individuals with arthritis as a permanent drain on work place and health resources. Copyright © 2011 by the American College of Rheumatology.

Evaluation of the Work-Place Cooperative Project in Geography Degrees at the University of Leeds.

Science.gov (United States)

Hogg, James

1998-01-01

Describes the context and objective of a Work-Place Cooperative Project (WPCP) established in the School of Geography at the University of Leeds in 1995. The project presents students with business, commerce, industry, and environmental research issues that have geographical dimensions. Includes a number of examples from the WPCP. (MJP)

Farklı Çalışma Ortamlarında Oluşabilecek Hava Kirliliğinin Çalışanların Sağlığı Üzerindeki Etkileri / The Effects of Air Pollution on Workers’ Health In Different Work Places

Directory of Open Access Journals (Sweden)

Simge Taner

2012-12-01

ıyla ilgili alınabilecek tedbirler açıklanmaya çalışılmıştır. The Effects of Air Pollution on Workers’ Health In Different Work Places Air quality in industrial and non-industrial work places (such as school, office, photocopy center, restaurant is very significant not only for workers’ comfort, but also for their health. Generally, parameters such as temperature, moisture, air exchange rate, sulphur dioxide (SO2, carbon dioxide (CO2, suspended particulate matter (PM, hydrogen sulphide (H2S, volatile organic compounds (VOC, nitrogen oxides (NOx, carbon monoxide (CO, ozone (O3, radon, hydrogen fluoride (HF, formaldehyde (HCHO and microbial control are analyzed for indoor air quality assessment. With the help of these analyses some important foresights could be made for workers’ health. Lots of pollutant can be defined in production areas, especially metal processing and iron steel industry compared to other working places. In our country, not only production sector but also mining operations have lots of health risks for human and environment. Although occupational diseases have notable risks for employees working in mines, there are not adequate analyses. In this study, parameters which have adverse effects on indoor air quality in mining and metal sectors are investigated and some measures suggested to protect for employees’ health working in these sectors.

Microbial air quality in mass transport buses and work-related illness among bus drivers of Bangkok Mass Transit Authority.

Science.gov (United States)

Luksamijarulkul, Pipat; Sundhiyodhin, Viboonsri; Luksamijarulkul, Soavalug; Kaewboonchoo, Orawan

2004-06-01

The air quality in mass transport buses, especially air-conditioned buses may affect bus drivers who work full time. Bus numbers 16, 63, 67 and 166 of the Seventh Bus Zone of Bangkok Mass Transit Authority were randomly selected to investigate for microbial air quality. Nine air-conditioned buses and 2-4 open-air buses for each number of the bus (36 air-conditioned buses and 12 open-air buses) were included. Five points of in-bus air samples in each studied bus were collected by using the Millipore A ir Tester Totally, 180 and 60 air samples collected from air-conditioned buses and open-air buses were cultured for bacterial and fungal counts. The bus drivers who drove the studied buses were interviewed towards histories of work-related illness while working. The results revealed that the mean +/- SD of bacterial counts in the studied open-air buses ranged from 358.50 +/- 146.66 CFU/m3 to 506 +/- 137.62 CFU/m3; bus number 16 had the highest level. As well as the mean +/- SD of fungal counts which ranged from 93.33 +/- 44.83 CFU/m3 to 302 +/- 294.65 CFU/m3; bus number 166 had the highest level. Whereas, the mean +/- SD of bacterial counts in the studied air-conditioned buses ranged from 115.24 +/- 136.01 CFU/m3 to 244.69 +/- 234.85 CFU/m3; bus numbers 16 and 67 had the highest level. As well as the mean +/- SD of fungal counts which rangedfrom 18.84 +/- 39.42 CFU/m3 to 96.13 +/- 234.76 CFU/m3; bus number 166 had the highest level. When 180 and 60 studied air samples were analyzed in detail, it was found that 33.33% of the air samples from open-air buses and 6.11% of air samples from air-conditioned buses had a high level of bacterial counts (> 500 CFU/m3) while 6.67% of air samples from open-air buses and 2.78% of air samples from air-conditioned buses had a high level of fungal counts (> 500 CFU/m3). Data from the history of work-related illnesses among the studied bus drivers showed that 91.67% of open-air bus drivers and 57.28% of air-conditioned bus drivers had

Impact of air traffic on the climate

Energy Technology Data Exchange (ETDEWEB)

Stief, G. [Florence Univ. (Italy). Ist. di Agrometeorologia

1997-12-31

Though emission from world-wide air traffic may seem to be relatively small in comparison to that from all other anthropogenic sources, the deleterious effect on the climate of the gases and particles emitted by planes is disproportionately large. It is thought that air traffic, working together with pollutants that have already accumulated at critical heights, and depending on humidity and temperature, plays a decisive role in helping to cause the changes, presented below, in global radiation, sunshine duration, rainfall and maximum and minimum temperatures which are taking place. (author) 7 refs.

Impact of air traffic on the climate

Energy Technology Data Exchange (ETDEWEB)

Stief, G [Florence Univ. (Italy). Ist. di Agrometeorologia

1998-12-31

Though emission from world-wide air traffic may seem to be relatively small in comparison to that from all other anthropogenic sources, the deleterious effect on the climate of the gases and particles emitted by planes is disproportionately large. It is thought that air traffic, working together with pollutants that have already accumulated at critical heights, and depending on humidity and temperature, plays a decisive role in helping to cause the changes, presented below, in global radiation, sunshine duration, rainfall and maximum and minimum temperatures which are taking place. (author) 7 refs.

Working Group 'Air pollution abatement' of the University of Stuttgart -ALS. Annual report 1990

International Nuclear Information System (INIS)

1991-01-01

Despite considerable efforts for air pollution abatement - examples are here desulphurization and nitrogen removal in power and large combustion plants as well as catalytic converters for automobiles there are still many problems to solve. Many small and medium-size companies still have to reduce production-related pollutant emissions, traffic still is a major source of pollutants. Air pollution abatement in the new Federal states and other Eastern European countries is a particularly urgent task and reductions of CO 2 emissions from energy production processes with fossil fuels are not least a great challenge. Apart from industry, legislation and administration especially science is called upon to find solutions to these problems. The university of Stuttgart takes up the challenge. Numerous institutes - 17 of 8 faculties -united in the working group ''air pollution abatement'' of the university of Stuttgart which carries out in interdisciplinary cooperation research work in the area of air pollution abatement. In this annual report activities of individual member states institutes in the area of air pollution abatement (fields of study, current research projects, cooperations and publications in 1991) as well as joint projects are presented. (orig./KW) [de

Healthy Places

Centers for Disease Control (CDC) Podcasts

Every person has a stake in environmental public health. As the environment deteriorates, so does the physical and mental health of the people within it. Healthy places are those designed and built to improve the quality of life for all people who live, work, worship, learn, and play within their borders -- where every person is free to make choices amid a variety of healthy, available, accessible, and affordable options. The CDC recognizes significant health issues and places that are vital in developing the Healthy Places program and provides examples in this report.

75 FR 66125 - Federal Land Managers' Air Quality Related Values Work Group (FLAG)

Science.gov (United States)

2010-10-27

... pollutants that could affect the health and status of resources in areas managed by the three agencies... Work Group (FLAG) AGENCY: National Park Service, Interior. ACTION: Notice of availability of final... Public Comments document. The Federal Land Managers' Air Quality Related Values Work Group (FLAG) was...

Analysis of a tool ergonomic working in air traffic control: perceptions of operators and contributions to workload

Directory of Open Access Journals (Sweden)

Arlete Ana Motter

2012-11-01

Full Text Available The aim of this study was to evaluate the perception of the operators and the role of the strips in the workload of air traffic controllers in light of the ergonomic analysis of work. It was developed during the data collection for the doctoral thesis defended in 2007 at the Post-graduate in Production Engineering at UFSC. Submitted to and approved by the Ethics Committee  in Research of the  Tuiuti University of Paraná. A number of 35 military operators of both sexes (80% male and 20% female participated, all belonging to the Brazilian Air Force, which carried out their functions in the Second Integrated Center of Air Defense and Air Traffic Control (CINDACTA II, located in Curitiba-PR. It was used the methodology of analysis of work ergonomics. The results made it possible to know the content of the prescribed electronic strip and the complexity of work in real activity, such as the manual entry of the strip and the AFIL flight plan. It was verified that the operators build operational strategies in terms of organization of the strips in order to facilitate their work. The conclusion is that in the work of air traffic controller there are several interacting variables, and when the content of the work required is different from what is established, the workload increases, which may endanger the health of workers as well as aircraft safety.

Implementing a High Performance Work Place in the Distribution and Logistics Industry: Recommendations for Leadership & Team Member Development

Science.gov (United States)

McCann, Laura Harding

2012-01-01

Leadership development and employee engagement are two elements critical to the success of organizations. In response to growth opportunities, our Distribution and Logistics company set on a course to implement High Performance Work Place to meet the leadership and employee engagement needs, and to find methods for improving work processes. This…

Non-Place

DEFF Research Database (Denmark)

formulation. The anthology contains 17 articles engaged directly in the application, retrofitting and broadening of the concept of the non-place to a range of literary and media texts, as well as the merging of this concept to other theoretical concepts by e.g. Michel Foucault, Gilles Deleuze, Alain Badiou......We spend more and more of our everyday lives in what Marc Augé calls non-places – homogenous, but bland places of transit. This anthology addresses the representations of non-places in literature, culture and media, and critiques and re-actualizes Augé’s work twenty years after its initial...... Jutland, and many others. This anthology is the seventh publication in the IRGiC series and it springs from a research seminar held at Aalborg University in May 2013: “Non-Place in Literature, Media and Culture”....

System for measuring of air concentration in air-steam mixture during the transients

International Nuclear Information System (INIS)

Gorbenko, Gennady A.; Gakal, Pavlo G.; Epifanov, Konstantin S.; Osokin, Gennady V.; Smirnov, Sergey V.

2006-01-01

Description of system for air concentration measuring in air-steam mixture during the transients is represented. Air concentration measuring is based on discrete sampling method. The measuring system consists of sampler, transport pipeline, distributor and six measuring vessels. From the sampler air-steam mixture comes to distributor through transport pipeline and fills consecutively the measuring vessels. The true air concentration in place of measurement was defined based on measured air concentration in samples taken from measuring vessels. For this purpose, the mathematical model of transients in measuring system was developed. Air concentration transient in air-steam mixture in place of measurement was described in mathematical model by air concentration time-dependent function. The function parameters were defined based on air concentration measured in samples taken from measuring vessels. Estimated error of air concentration identification was about 10%. Measuring system was used in experiments on EREC BKV-213 test facility intended for testing of VVER-440/V-213 reactor barbotage-vacuum system

Canine Supply for Physical Security: An Analysis of the Royal Australian Air Force Military Working Dog Program

Science.gov (United States)

2016-03-01

PHYSICAL SECURITY: AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM by Mark W. Powell March 2016 Thesis...AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM 5. FUNDING NUMBERS 6. AUTHOR(S) Mark W. Powell 7. PERFORMING...increased demand on its physical security elements. Its military working dog (MWD) workforce is required to meet an inventory of 204 by end of year 2023 as

LOAD EQUILIBRATION OF WORKING PLACES ARRANGED ON CONVEYORS USED FOR FOOTWEAR UPPERS MANUFACTURING

Directory of Open Access Journals (Sweden)

HARNAGEA Florentina

2016-05-01

Full Text Available In the present paper there is presented how to achieve a load equilibration of workstations for a conveyor with imposed pace, in the case of manufacturing uppers for a women boots model. Equilibration of work charging is done by switching worker’s operations in order to use at full time each worker placed in the technological flow process. In the manufacruring process of shoe uppers of the considered model, there have been established the operative time and production rates per operation. Thus there has been calculated the work necessary amount Nci for accomplishing different production rates: Q=600,650, 700, 750... 900pairs/ 8 h and the necessary amount of work Nai was adopted. A technology line of manufacturing a footwear item is used at its optimum capacity when the number of work vacancy is minimum, 0.013 corresponding to a flow production of 700pairs / 8h the highest labor productivity being obtained, ie 17.5 pairs / worker • 8h. By equilibrating the work charge for each operation, it is obtained, for a daily production of 700pairs / 8h, a reduction of the number of workspaces from 40 to 36 workers and hence a labor productivity of 19.44 pairs / worker • 8h.

The development and validation of an ergonomics index for assessing tractor operator work place

OpenAIRE

Barbieri, Juan Paulo; Schlosser, José Fernando; Farias, Marcelo Silveira de; Negri, Giácomo Müller; Oliveira, Luis Fernando Vargas de

2018-01-01

ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996), which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015) and ABNT ...

Predictability, Work-Family Conflict, and Intent to Stay: An Air Force Case Study

National Research Council Canada - National Science Library

Obruba, Patrick

2001-01-01

A survey was completed by 362 active duty Air Force members in December 2000 regarding their perceptions of schedule predictability, work-family conflict, job satisfaction, organizational commitment...

Safe places for pedestrians: using cognitive work analysis to consider the relationships between the engineering and urban design of footpaths.

Science.gov (United States)

Stevens, Nicholas; Salmon, Paul

2014-11-01

Footpaths provide an integral component of our urban environments and have the potential to act as safe places for people and the focus for community life. Despite this, the approach to designing footpaths that are safe while providing this sense of place often occurs in silos. There is often very little consideration given to how designing for sense of place impacts safety and vice versa. The aim of this study was to use a systems analysis and design framework to develop a design template for an 'ideal' footpath system that embodies both safety and sense of place. This was achieved through using the first phase of the Cognitive Work Analysis framework, Work Domain Analysis, to specify a model of footpaths as safe places for pedestrians. This model was subsequently used to assess two existing footpath environments to determine the extent to which they meet the design requirements specified. The findings show instances where the existing footpaths both meet and fail to meet the design requirements specified. Through utilising a systems approach for footpaths, this paper has provided a novel design template that can inform new footpath design efforts or be used to evaluate the extent to which existing footpaths achieve their safety and sense of place requirements. Copyright © 2014 Elsevier Ltd. All rights reserved.

Women Workers: Subsistence in Eighteenth-century Buenos Aires

Directory of Open Access Journals (Sweden)

Mª Selina Gutiérrez Aguilera

2012-06-01

Full Text Available In colonial society of eighteenth-century Buenos Aires, there was a series of women who Traditional historiography has not given their rightful place: working women.This study aims to analyze and re-evaluation of these females, there also arises a series of networks of “gender solidarity” among women in need of help, in which working women had a role. This is taken as the standard source that rose in the city of Buenos Aires in 1744; it throws a lot of information to understand this complex phenomenon.There will be a thorough analysis of all models of working women the pattern shows, from different perspectives. These ladies are a very heterogeneous group, as work motivations are very different: for aggregate found, being slaves, etc. But at the same time is to keep track of paper, which together with the work effort of these played the charity and solidarity and support for female survival at this time.

Air Contamination With Fungals In Museum

Science.gov (United States)

Scarlat, Iuliana; Haiducu, Maria; Stepa, Raluca

2015-07-01

The aim of the studies was to determine the level and kind of fungal contamination of air in museum, deposits patrimony, restoration and conservation laboratories and their effects on health of workers. Microbiological air purity was measured with a SAS-100 Surface Air System impactor. The fungal contamination was observed in all 54 rooms where we made determinations. The highest levels of fungal were recorded at rooms with hygroscopic patrimony objects, eg carpets, chairs, upholstered chairs, books etc. The most species identified included under common allergens: Aspergillus, Penicillium, and Mucor. There fungal species belonging to the genus identified in this study, can trigger serious diseases museum workers, such as for example Aspergillus fumigatus, known allergies and toxic effects that may occur. In some places of the museum, occupational exposure limit values to fungi present in the air in the work environment, recommended by the specialized literature, have been overcome.

Compressed air tunneling and caisson work decompression procedures: development, problems, and solutions.

Science.gov (United States)

Kindwall, E P

1997-01-01

Multinational experience over many years indicates that all current air decompression schedules for caisson and compressed air tunnel workers are inadequate. All of them, including the Occupational Safety and Health Administration tables, produce dysbaric osteonecrosis. The problem is compounded because decompression sickness (DCS) tends to be underreported. Permanent damage in the form of central nervous system or brain damage may occur in compressed air tunnel workers, as seen on magnetic resonance imaging, in addition to dysbaric osteonecrosis. Oxygen decompression seems to be the only viable method for safely decompressing tunnel workers. Oxygen decompression of tunnel workers has been successfully used in Germany, France, and Brazil. In Germany, only oxygen decompression of compressed air workers is permitted. In our experience, U.S. Navy tables 5 and 6 usually prove adequate to treat DCS in caisson workers despite extremely long exposure times, allowing patients to return to work following treatment for DCS. Tables based on empirical data and not on mathematical formulas seem to be reasonably safe. U.S. Navy Exceptional Exposure Air Decompression tables are compared with caisson tables from the United States and Great Britain.

The effects of inhaled acetone on place conditioning in adolescent rats.

Science.gov (United States)

Lee, Dianne E; Pai, Jennifer; Mullapudui, Uma; Alexoff, David L; Ferrieri, Richard; Dewey, Stephen L

2008-03-01

Acetone is an ubiquitous ingredient in many household products (e.g., glue solvents, air fresheners, adhesives, nail polish, and paint) that is putatively abused; however, there is little empirical evidence to suggest that acetone alone has any abuse liability. Therefore, we systematically investigated the conditioned response to inhaled acetone in a place conditioning apparatus. Three groups of male, Sprague-Dawley rats were exposed to acetone concentrations of 5000, 10,000 or 20,000 ppm for 1 h in a conditioned place preference apparatus alternating with air for 6 pairing sessions. A place preference test ensued in an acetone-free environment. To test the preference of acetone as a function of pairings sessions, the 10,000 ppm group received an additional 6 pairings and an additional group received 3 pairings. The control group received air in both compartments. Locomotor activity was recorded by infrared photocells during each pairing session. We noted a dose response relationship to acetone at levels 5000-20,000 ppm. However, there was no correlation of place preference as a function of pairing sessions at the 10,000 ppm level. Locomotor activity was markedly decreased in animals on acetone-paired days as compared to air-paired days. The acetone concentrations we tested for these experiments produced a markedly decreased locomotor activity profile that resemble CNS depressants. Furthermore, a dose response relationship was observed at these pharmacologically active concentrations, however, animals did not exhibit a positive place preference.

The effects of inhaled acetone on place conditioning in adolescent rats

Science.gov (United States)

Lee, Dianne E.; Pai, Jennifer; Mullapudui, Uma; Alexoff, David L.; Ferrieri, Richard; Dewey, Stephen L.

2009-01-01

Introduction Acetone is a ubiquitous ingredient in many household products (e.g., glue solvents, air fresheners, adhesives, nail polish, and paint) that is putatively abused; however, there is little empirical evidence to suggest that acetone alone has any abuse liability. Therefore, we systematically investigated the conditioned response to inhaled acetone in a place conditioning apparatus. Method Three groups of male, Sprague-Dawley rats were exposed to acetone concentrations of 5,000, 10,000 or 20,000 ppm for 1 hour in a conditioned place preference apparatus alternating with air for 6 pairing sessions. A place preference test ensued in an acetone-free environment. To test the preference of acetone as a function of pairings sessions, the 10,000 ppm group received an additional 6 pairings and an additional group received 3 pairings. The control group received air in both compartments. Locomotor activity was recorded by infrared photocells during each pairing session. Results We noted a dose response relationship to acetone at levels 5,000-20,000 ppm. However, there was no correlation of place preference as a function of pairing sessions at the 10,000 ppm level. Locomotor activity was markedly decreased in animals on acetone-paired days as compared to air-paired days. Conclusion The acetone concentrations we tested for these experiments produced a markedly decreased locomotor activity profile that resemble CNS depressants. Furthermore, a dose response relationship was observed at these pharmacologically active concentrations, however, animals did not exhibit a positive place preference. PMID:18096214

A dynamic model for air-based photovoltaic thermal systems working under real operating conditions

International Nuclear Information System (INIS)

Sohel, M. Imroz; Ma, Zhenjun; Cooper, Paul; Adams, Jamie; Scott, Robert

2014-01-01

Highlights: • A dynamic model suitable for air-based photovoltaic thermal (PVT) systems is presented. • The model is validated with PVT data from two unique buildings. • The simulated output variables match very well with the experimental data. • The performance of the PVT system under changing working condition is analysed. - Abstract: In this paper a dynamic model suitable for simulating real operating conditions of air-based photovoltaic thermal (PVT) systems is presented. The performance of the model is validated by using the operational data collected from the building integrated photovoltaic (PVT) systems installed in two unique buildings. The modelled air outlet temperature and electrical power match very well with the experimental data. In Solar Decathlon house PVT, the average (RMS) error in air outlet temperatures was 4.2%. The average (RMS) error in electrical power was also 4.2%. In the Sustainable Buildings Research Centre PVT, the average errors (RMS) of PV and air temperatures were 3.8% and 2.2%, respectively. The performance of the PVT system under changing working condition is also analysed in this paper. The analysis includes the effect of ambient air temperature, air inlet temperature, air flow rate and solar irradiation on thermal, electrical, first law and second law efficiencies. Both the thermal and the 1st law efficiencies almost linearly increased with the increase of the ambient temperature. However, the PVT electrical efficiency and the second law efficiency decreased with the increase of the ambient temperature. All efficiencies expect the second law efficiency decreased with increase of the PVT air inlet temperature. The second law efficiency first increased and then reduced. With increasing the air flow rate all the efficiencies increased. The electrical and second law efficiencies become less sensitive when the air flow rate exceeded 300 l/s. Both the thermal and the 1st law efficiencies decreased while the electrical

Physical nuisances at work place

International Nuclear Information System (INIS)

2005-01-01

This file give a general survey of the different factors that constitute the environment of workers and that can have repercussion on the working conditions on health of exposed personnel: noise, vibration, electricity, radiations, temperature and extreme pressures. (N.C.)

In-place HEPA filter penetration test

International Nuclear Information System (INIS)

Bergman, W.; Wilson, K.; Elliott, J.; Bettencourt, B.; Slawski, J.W.

1997-01-01

We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in- place penetration test is practical

Hygienic assessment of asbestos containing dust in the air of the working zone at thermal power plants

Directory of Open Access Journals (Sweden)

Moshkovskiy V.E.

2016-09-01

Full Text Available Asbestos and artificial mineral fibers were used actively at thermal power plants (TPP as heat insulation of pipes, seal plates, electrical insulation, etc. But content of asbestos fibers in the air of working zone at TPP was not registered to date. Therefore, aim of the work was to assess asbestos containing dust in the air of working zone at steam turbine and gas turbine TPP in the east region of the country. It was found that old insulation at TPP is mixture of asbestoses that contains chrysotile asbestos and traces of amphibole asbestoses – crocidolite and anthophyllite. In the majority of investigated workplaces at the steam turbine TPP significant dust generation with exceed of maximum one-time exposure limits (2 mg/m3 was observed. Concentration of respirable fibers in the air of working zone in all workplaces did not exceed actual hygienic standard (1 fiber/cm3.

Healthy Places

Centers for Disease Control (CDC) Podcasts

2007-04-10

Every person has a stake in environmental public health. As the environment deteriorates, so does the physical and mental health of the people within it. Healthy places are those designed and built to improve the quality of life for all people who live, work, worship, learn, and play within their borders -- where every person is free to make choices amid a variety of healthy, available, accessible, and affordable options. The CDC recognizes significant health issues and places that are vital in developing the Healthy Places program and provides examples in this report.  Created: 4/10/2007 by CDC National Center for Environmental Health.   Date Released: 4/13/2007.

A Philosophical Topography of Place and Non-Place: Lithuanian Context

Directory of Open Access Journals (Sweden)

Odeta Žukauskienė

2016-09-01

Full Text Available Drawing on French anthropologist Marc Augé and his seminal book Non-Places (1995 the author pays attention to the transformation of contemporary urban landscapes. In thinking trough the dialectic of place and non-place, this paper aims to account for the apparent sense of placelesness in our cultural landscapes and in increasingly globalised world. If we want to ask fundamental questions about what has happened to our urban landscape and to the spirit of cities during the last decades then the concepts of place and non-place help us to describe the actual changes. Besides, Augé’s work gives us the methodological tools to address philosophical questions about the nature of supermodernity and the relationship between modernity and postmodernity moving toward new conditions of globality. This article will attempt to apply anthropological and philosophical concepts of place and space to the context of Lithuania, comparing the ways of spreading of non-places (non-lieu in the Soviet modernity and contemporary global, hyper-visual and liquid cultural landscape.

Breathing easier: Indonesia works towards cleaner air

International Nuclear Information System (INIS)

Madsen, Michael Amdi

2015-01-01

Indonesians can look forward to breathing cleaner air following upcoming changes in regulations introduced as a result of a study conducted using nuclear analytical techniques. Lead pollution and other fine particulate matter in the air is now, for the first time, being accurately monitored and is giving Indonesian officials a good understanding of their air pollution problem and how to manage it.

Determination and evaluation of air quality control. Manual of ambient air quality control in Germany

Energy Technology Data Exchange (ETDEWEB)

Lahmann, E.

1997-07-01

Measurement of air pollution emissions and ambient air quality are essential instruments for air quality control. By undertaking such measurements, pollutants are registered both at their place of origin and at the place where they may have an effect on people or the environment. Both types of measurement complement each other and are essential for the implementation of air quality legislation, particularly, in compliance with emission and ambient air quality limit values. Presented here are similar accounts of measurement principles and also contains as an Appendix a list of suitability-tested measuring devices which is based on information provided by the manufacturers. In addition, the guide of ambient air quality control contains further information on discontinuous measurement methods, on measurement planning and on the assessment of ambient air quality data. (orig./SR)

Ventral tegmental area disruption selectively affects CA1/CA2 but not CA3 place fields during a differential reward working memory task.

Science.gov (United States)

Martig, Adria K; Mizumori, Sheri J Y

2011-02-01

Hippocampus (HPC) receives dopaminergic (DA) projections from the ventral tegmental area (VTA) and substantia nigra. These inputs appear to provide a modulatory signal that influences HPC dependent behaviors and place fields. We examined how efferent projections from VTA to HPC influence spatial working memory and place fields when the reward context changes. CA1 and CA3 process environmental context changes differently and VTA preferentially innervates CA1. Given these anatomical data and electrophysiological evidence that implicate DA in reward processing, we predicted that CA1 place fields would respond more strongly to both VTA disruption and changes in the reward context than CA3 place fields. Rats (N = 9) were implanted with infusion cannula targeting VTA and recording tetrodes aimed at HPC. Then they were tested on a differential reward, win-shift working memory task. One recording session consisted of 5 baseline and 5 manipulation trials during which place cells in CA1/CA2 (N = 167) and CA3 (N = 94) were recorded. Prior to manipulation trials rats were infused with either baclofen or saline and then subjected to control or reward conditions during which the learned locations of large and small reward quantities were reversed. VTA disruption resulted in an increase in errors, and in CA1/CA2 place field reorganization. There were no changes in any measures of CA3 place field stability during VTA disruption. Reward manipulations did not affect performance or place field stability in CA1/CA2 or CA3; however, changes in the reward locations "rescued" performance and place field stability in CA1/CA2 when VTA activity was compromised, perhaps by trigging compensatory mechanisms. These data support the hypothesis that VTA contributes to spatial working memory performance perhaps by maintaining place field stability selectively in CA1/CA2. Copyright © 2009 Wiley-Liss, Inc.

DOCTOR’S AUTOMATIZED WORK PLACE FOR THE TREATMENT OF PATIENTS WITH GAUCHER DISEASE

Directory of Open Access Journals (Sweden)

N. H. Horovenko

2015-05-01

Full Text Available The program was designed to account the registry of patients with Gaucher disease. During the investigation of object domain a medical documentation and work regime of centre were analyzed including medical forms and questionnaires, medical cards, the order of filling appointment of treatment, report forms. The program provides the creation of automatized work place for interaction with patients with Gaucher disease on a personal computer of doctor. The purpose of development system is to perform a range of functions, which correspond to the full cycle of interaction doctor with patients. General function: introduction and correction of data, analysis and preservation of the history of this treatment, filtration patient records, construction of schedules based on the results of blood tests and examinations which reflect the dynamics of the patient. Special functions: calculation of required quantity of the medicine to the patient, tracing of human health standards depending on the age of the patient, the cost of the medicine.

Independent working place on the base of the DVK-2M computer and UNO-4096 analyzer

International Nuclear Information System (INIS)

Zajtsev, M.Yu.; Balandin, A.F.

1987-01-01

Independent working place on the base of the DVK-2M microcomputer and UNO-4096-90 analyzer, designated for investigations of the field of reactor and protection physics is described. Two ways of the analyzer connection with the DVK-2M microcomputer are suggested : by means of CAMAC system or direct connection of UNO-analyzer with the DVK-2M processor

In-place HEPA filter penetration test

Energy Technology Data Exchange (ETDEWEB)

Bergman, W.; Wilson, K.; Elliott, J. [Lawrence Livermore National Lab., CA (United States)] [and others

1997-08-01

We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in-place penetration test is practical. 14 refs., 14 figs., 3 tabs.

Working parameters affecting earth-air heat exchanger (EAHE) system performance for passive cooling: A review

Science.gov (United States)

Darius, D.; Misaran, M. S.; Rahman, Md. M.; Ismail, M. A.; Amaludin, A.

2017-07-01

The study on the effect of the working parameters such as pipe material, pipe length, pipe diameter, depth of burial of the pipe, air flow rate and different types of soils on the thermal performance of earth-air heat exchanger (EAHE) systems is very crucial to ensure that thermal comfort can be achieved. In the past decade, researchers have performed studies to develop numerical models for analysis of EAHE systems. Until recently, two-dimensional models replaced the numerical models in the 1990s and in recent times, more advanced analysis using three-dimensional models, specifically the Computational Fluid Dynamics (CFD) simulation in the analysis of EAHE system. This paper reviews previous models used to analyse the EAHE system and working parameters that affects the earth-air heat exchanger (EAHE) thermal performance as of February 2017. Recent findings on the parameters affecting EAHE performance are also presented and discussed. As a conclusion, with the advent of CFD methods, investigational work have geared up to modelling and simulation work as it saves time and cost. Comprehension of the EAHE working parameters and its effect on system performance is largely established. However, the study on type of soil and its characteristics on the performance of EAHEs systems are surprisingly barren. Therefore, future studies should focus on the effect of soil characteristics such as moisture content, density of soil, and type of soil on the thermal performance of EAHEs system.

ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Places disponibles*/Places available **

CERN Multimedia

2003-01-01

* Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Des places sont disponibles dans les cours suivants : Places are available in the following courses : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) CLEAN-2002 : Working in a Cleanroom : 23.10.03 (half day, free of charge) Plannification de projet avec MS-Project/Project Scheduling with MS-Project : 2 sessions : 23.10 & 4.11.03 and 18 &25.11.03 (2 jours/2 days - langue à définir/language to be defined) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) Introduction to Pspice : 4.11...

Context in place

DEFF Research Database (Denmark)

Nordentoft, Helle Merete; Thomsen, Rie

specifically argue for a more grounded approach to the conception of context - a topographic approach - in which the physical setting - i.e. 'the place' becomes an inevitable part of analyses of guidance practices in order to understand participants' sense-making processes. In the paper we draw on two case...... studies on interdisciplinary clinical supervision and work place guidance in which there appears to be a mismatch between intended outcomes and actual events. The analyses demonstrate and support that 'the place' seems - to influence partipants' responses in the guidance sessions and, therefore, must...

Determining EmployeeAND#8217;s Work Place Satisfaction and Training Needs

Directory of Open Access Journals (Sweden)

Gulendam Karadag

2012-12-01

Full Text Available Introduction and Objective: Employment is indispensible for humans. There is a two-way interaction between the employee’s health and his working environment. Health affects working life and working life, too, affects health. Our study has been carried out in a descriptive manner, in order to determine the workplace conditions, satisfaction rates and training needs of workers at a textile factory in the Southeastern Region of Turkey, Material and Method: This study was carried out at a textile factory in the Southeastern Region of Turkey, on 200 workers who were willing to fill out a questionnaire form, between 1st March 2009 and 30th April 2009. Data were gathered by vis-a-vis meeting with workers, using a questionnaire form devised by researchers rewieving related literature. A special permission from the management of the factory and worker’s consent was obtained before initiating the study. Data were analyzed on computer using percentage, arithmetic mean and Chi-Square features of SPSS13.0 programme. Findings: The average age of the workers participating in this study was 26,8 (Min 17-Max50. 72,5% were men, 63,0% were married, 61,0% were primary school graduates. It was found that: 95,0% of the workers underwent a through medical examination when they were first recruited. 88,0% easily reached the medical doctor at the factory whenever they needed.out of them, 17,0% did not receive training of any kind from the workplace and 91,5% stated that they needed training. As for the adequecy of the facilities offered at work place, 92,2% stated that lighting, 78,0% stated that social security and 70,0% stated that transportation was satisfactory. Conclusion: The majority of the workers stated that they needed training and found the facilities offered by their workplace as satisfactory and adequate. It was found that there was a significant difference between the sex and training needs of the employees (p<0.05. In the light of these findings, it

Reprint of "Safe places for pedestrians: using cognitive work analysis to consider the relationships between the engineering and urban design of footpaths".

Science.gov (United States)

Stevens, Nicholas; Salmon, Paul

2015-01-01

Footpaths provide an integral component of our urban environments and have the potential to act as safe places for people and the focus for community life. Despite this, the approach to designing footpaths that are safe while providing this sense of place often occurs in silos. There is often very little consideration given to how designing for sense of place impacts safety and vice versa. The aim of this study was to use a systems analysis and design framework to develop a design template for an 'ideal' footpath system that embodies both safety and sense of place. This was achieved through using the first phase of the Cognitive Work Analysis framework, Work Domain Analysis, to specify a model of footpaths as safe places for pedestrians. This model was subsequently used to assess two existing footpath environments to determine the extent to which they meet the design requirements specified. The findings show instances where the existing footpaths both meet and fail to meet the design requirements specified. Through utilising a systems approach for footpaths, this paper has provided a novel design template that can inform new footpath design efforts or be used to evaluate the extent to which existing footpaths achieve their safety and sense of place requirements. Copyright © 2014 Elsevier Ltd. All rights reserved.

CONAGT's place in ASME's centennial year

International Nuclear Information System (INIS)

Miller, W.H. Jr.

1985-01-01

A status report on ASME's Committee on Nuclear Air and Gas Treatment (CONAGT) is presented. This year ASME celebrates its centennial while CONAGT issues its first code sections covering fans, blowers, and refrigeration equipment. Significant code related CONAGT activities are covered as well as an explanation of CONAGT's place in the ASME organization

Royal Danish Air Force. Air Operations Doctrine

DEFF Research Database (Denmark)

Nørby, Søren

This brief examines the development of the first Danish Air Force Air Operations Doctrine, which was officially commissioned in October 1997 and remained in effect until 2010. The development of a Danish air power doctrine was heavily influenced by the work of Colonel John Warden (USAF), both...... through his book ”The Air Campaign” and his subsequent planning of the air campaign against Iraq in 1990-1991. Warden’s ideas came to Denmark and the Danish Air Force by way of Danish Air Force students attending the United States Air Force Air University in Alabama, USA. Back in Denmark, graduates from...... the Air University inspired a small number of passionate airmen, who then wrote the Danish Air Operations Doctrine. The process was supported by the Air Force Tactical Command, which found that the work dovetailed perfectly with the transformation process that the Danish Air Force was in the midst...

The effect of Philadelphia and Pennsylvania Clean Indoor Air Act on food services and drinking places sales and numbers, 1998-2011.

Science.gov (United States)

Ma, Zhen-Qiang; Fisher, Monica A

2013-11-27

Philadelphia enacted its Clean Indoor Air Act (CIAA) nearly 2 years before the statewide CIAA. In this study, we assessed the economic impact of CIAAs on 4 types of food services and drinking places and addressed the predominant limitation of previous pre-post ban studies, namely the lack of control for confounders and changes in secular trends over time. We analyzed data from Pennsylvania Department of Revenue Quarterly 1998-2011 taxable county-level revenue sales and number of food services and drinking places. Region-specific and type-specific adjusted sales and number of food services and drinking places accounted for consumer spending as a general economic indicator. Segmented regression analysis of interrupted time-series methodology assessed changes in trend and level. Pennsylvania CIAA had no significant effect on adjusted sales or numbers except for an increase in sales in Philadelphia for limited-service eating places and in the surrounding 4 counties for special food services. Philadelphia CIAA was associated with an increase in adjusted numbers of full-service restaurants in Philadelphia and the rest of the state, special food services in Philadelphia, and drinking places in the rest of the state, and a decrease in the number of special food services in the surrounding counties. Philadelphia CIAA had no significant effect on adjusted sales except for an increase in special food services in the rest of the state. Overall, CIAAs had no negative business-related impact and, for the most part, suggest a positive impact on restaurant sales and numbers. Our results provide further support for comprehensive CIAA ordinance for restaurants.

Air filters for use at nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Linder, P [Aktiebolaget Atomenergi, Studsvik, Nykoeping (Sweden)

1970-12-01

The ventilation system of a nuclear facility plays a vital role in ensuring that the air in working areas and the environment remains free from radioactive contamination. An earlier IAEA publication, Techniques for Controlling Air Pollution from the Operation of Nuclear Facilities, Safety Series No. 17, deals with the design and operation of ventilation systems at nuclear facilities. These systems are usually provided with air-cleaning devices which remove the contaminants from the air. This publication is intended as a guide to those who are concerned with the design of air-filtering systems and with the testing, operation and maintenance of air-filter installations at nuclear facilities. Emphasis is mainly placed on so-called high-efficiency particulate air filters (HEPA filters) and on providing general information on them. Besides describing the usual filter types, their dimensions and construction materials, the guidebook attempts to explain their properties and behaviour under different operating conditions. It also gives advice on testing and handling the filters so that effective and safe performance is ensured. The guidebook should serve as an introduction to the use of high efficiency particulate air filters in countries where work with radioactive materials has only recently commenced. The list of references at the end of the book indicates sources of more advanced information for those who already have comprehensive experience in this field. It is assumed here that the filters are obtained from a manufacturer, and the guidebook thus contains no information on the design and development of the filter itself, nor does it deal with the cleaning of the intake air to a plant, with gas sorption or protective respiratory equipment.

Air filters for use at nuclear facilities

International Nuclear Information System (INIS)

Linder, P.

1970-01-01

The ventilation system of a nuclear facility plays a vital role in ensuring that the air in working areas and the environment remains free from radioactive contamination. An earlier IAEA publication, Techniques for Controlling Air Pollution from the Operation of Nuclear Facilities, Safety Series No. 17, deals with the design and operation of ventilation systems at nuclear facilities. These systems are usually provided with air-cleaning devices which remove the contaminants from the air. This publication is intended as a guide to those who are concerned with the design of air-filtering systems and with the testing, operation and maintenance of air-filter installations at nuclear facilities. Emphasis is mainly placed on so-called high-efficiency particulate air filters (HEPA filters) and on providing general information on them. Besides describing the usual filter types, their dimensions and construction materials, the guidebook attempts to explain their properties and behaviour under different operating conditions. It also gives advice on testing and handling the filters so that effective and safe performance is ensured. The guidebook should serve as an introduction to the use of high efficiency particulate air filters in countries where work with radioactive materials has only recently commenced. The list of references at the end of the book indicates sources of more advanced information for those who already have comprehensive experience in this field. It is assumed here that the filters are obtained from a manufacturer, and the guidebook thus contains no information on the design and development of the filter itself, nor does it deal with the cleaning of the intake air to a plant, with gas sorption or protective respiratory equipment

The culture of social media at work place: Case study in the City of Medan

OpenAIRE

Juliandi, Azuar

2017-01-01

Internet-based social media has become a part of life of the public society in this era. Many people use Facebook, Whatsapp, LinkedIn, Blogs and other social media to interact with each other. With social media, people exchange information and share experiences in cyberspace. Furthermore, at the present, social media is already becoming a part of the organizational culture in work place. This study aimed to analyze the relationship between the culture of social media and knowledge transfer, t...

[Examination of work-related stress and coping strategies among ambulance- and air-ambulance workers].

Science.gov (United States)

Schiszler, Bence; Karamánné Pakai, Annamária; Szabó, Zoltán; Raposa, László Bence; Pónusz, Róbert; Radnai, Balázs; Endrei, Dóra

2016-11-01

Among Hungary's health sector workers the presence of a high level of stress is known, which can affect the individual. The aim of the authors was to uncover major risk factors causing work-related stress, as well as its extent, and positive and negative coping strategies among ground and aerial rescue workers. From June until October 2015, a national survey was conducted among Hungarian rescue workers. An own questionnaire and Rahe Stress and coping validated short questionnaire online form were used. A total of 141 persons took part in the survey. As compared to air-ambulance workers, ground rescue workers were exposed to higher work-related stress effects (pStress and Coping Index effective coping mechanisms were observed among air rescue workers (pstress reduction. Orv. Hetil., 2016, 157(45), 1802-1808.

Twenty sixth DAE safety and occupational health professionals meet: cryogenic safety, electrical safety and ergonomics at work place

International Nuclear Information System (INIS)

2009-01-01

This conference gathered knowledge in safety and occupational health hazards in various fields of nuclear science and technology like radiations, high voltages, ultra-low temperature, ultra-high magnetic fields, electrical breakdown, fire, ergonomics and cryogenic safety at work place. Papers relevant to INIS database are indexed separately

Dynamic lighting for well-being in work places: Addressing the visual, emotional and biological aspects of lighting design.

NARCIS (Netherlands)

Knoop, M.

2006-01-01

Light can be used to increase alertness, evoke relaxation and suppress sleepiness. Therefore, it can be deployed to support the well-being and performance of people in working places. These socalled ‘non-visual’ or ‘biological’ effects have become an increasingly important topic in lighting design

Dynamic lighting for well-being in work places: Addressing the visual, emotional and biological aspects of lighting design

NARCIS (Netherlands)

Knoop, M.

2006-01-01

Light can be used to increase alertness, evoke relaxation and suppress sleepiness. Therefore, it can be deployed to support the well-being and performance of people in working places. These socalled ‘non-visual’ or ‘biological’ effects have become an increasingly important topic in lighting design

[Microbial air purity in hospitals. Operating theatres with air conditioning system].

Science.gov (United States)

Krogulski, Adam; Szczotko, Maciej

2010-01-01

The aim of this study was to show the influence of air conditioning control for microbial contamination of air inside the operating theatres equipped with correctly working air-conditioning system. This work was based on the results of bacteria and fungi concentration in hospital air obtained since 2001. Assays of microbial air purity conducted on atmospheric air in parallel with indoor air demonstrated that air filters applied in air-conditioning systems worked correctly in every case. To show the problem of fluctuation of bacteria concentration more precisely, every sequences of single results from successive measure series were examined independently.

Working towards healthy air in dwellings in Europe

NARCIS (Netherlands)

Franchi, M.; Carrer, P.; Kotzias, D.; Rameckers, E.M.A.L.; Seppänen, O.; Bronswijk, van J.E.M.H.; Viegi, G.; Gilder, J.A.; Valovirta, E.

2006-01-01

Poor indoor air quality has been implicated in the increase in allergic and respiratory diseases seen in industrialized countries in recent decades. Although air pollution in the workplace is well studied, much less is known about the consequences of poor air quality in homes. In an attempt to halt

Workability and Requests for Flexible Work Arrangements Among Older Adults: The Role of a Time and Place Management Intervention.

Science.gov (United States)

Morelock, Jeremiah C; McNamara, Tay K; James, Jacquelyn B

2017-11-01

This article investigates the effect of an intervention on the workability of older adults (i.e., the competence, health, and other mental and physical characteristics that workers need to meet the demands of their jobs). We used data from health care workers ( N = 437) who participated in a "time and place management" (TPM) intervention. Although related to flexible work options that aim to give workers more choice and control over the time and place of their work, TPM is conceptually distinct in that it focuses on the processes and guidelines necessary to the successful management of choice and control rather than the options alone. We focused on how the TPM intervention moderated the relationship between age and workability over time, with a particular focus on variation by baseline workability. Our results indicated that the intervention can benefit older workers with low workability.

Air traffic energy efficiency differs from place to place: analysis of historical trends by geographical zones using a macro-level methodology

International Nuclear Information System (INIS)

Cheze, Benoit; Gastineau, Pascal; Chevallier, Julien

2011-01-01

This article analyses energy efficiency coefficients and their evolution in the air transport sector. The proposed 'macro-level' methodology allows obtaining energy efficiency coefficients and their growth rates (corresponding to the evolution of energy gains) from 1983 to 2006 for eight distinct geographical regions and at the world level. During the whole period, energy efficiency improvements have been equal to 2.88% per year at the world level, with strong differences between regions. Moreover, our results indicate that domestic air travels are less energy efficient (i.e. more carbon intensive) than international air travels. This result applies in all regions. (authors)

On civil and architectural engineering works of the new prototype converter FUGEN

International Nuclear Information System (INIS)

Kiri, Akira; Yamagata, Takayasu.

1976-01-01

The relatively featured engineering work of FUGEN is reviewed, and the outline of ventilation system is illustrated. Civil engineering work commenced in 1970 and almost ended after 5 years. Test grout led to the practicability of injecting about 40 kg of milky cement per 1 meter of a drilled well. Ten meter long wells around the reactor building base and 6 meter long wells inside the base were staggeredly arranged at 3 meter intervals. They were drilled with a 46 mm boring machine. The drifter drilling method could not be employed because of hard rock joint. The place and method of disposing dredged soil, the securing of time and place for setting marine pipes, and the prevention of turbid current inflow during dredging had to be solved for cooling water intake. The turbid current inflow was avoided with a large oil fence and chemical solution. The reinforcing steel for concrete was prefabricated. Dry pack method was employed in the works under the containment vessel. The ventilation system covers whole buildings except the air recirculating system for the containment vessel. For the purpose of removing radioactively contaminated dusts, cooling was performed, as a rule, by once-through ventilation system with 100% outdoor air. The air flows in the direction from clean zone to high contamination zone through low contamination zone. The iodine-removing efficiency of a filter system is 90%. (Iwakiri, K.)

Meteorological and urban landscape factors on severe air pollution in Beijing.

Science.gov (United States)

Han, Lijian; Zhou, Weiqi; Li, Weifeng; Meshesha, Derege T; Li, Li; Zheng, Mingqing

2015-07-01

Air pollution gained special attention with the rapid development in Beijing. In January 2013, Beijing experienced extreme air pollution, which was not well examined. We thus examine the magnitude of air quality in the particular month by applying the air quality index (AQI), which is based on the newly upgraded Chinese environmental standard. Our finding revealed that (1) air quality has distinct spatial heterogeneity and relatively better air quality was observed in the northwest while worse quality happened in the southeast part of the city; (2) the wind speed is the main determinant of air quality in the city-when wind speed is greater than 4 m/sec, air quality can be significantly improved; and (3) urban impervious surface makes a contribution to the severity of air pollution-that is, with an increase in the fraction of impervious surface in a given area, air pollution is more severe. The results from our study demonstrated the severe pollution in Beijing and its meteorological and landscape factors. Also, the results of this work suggest that very strict air quality management should be conducted when wind speed less than 4 m/sec, especially at places with a large fraction of urban impervious surface. Prevention of air pollution is rare among methods with controls on meteorological and urban landscape conditions. We present research that utilizes the latest air quality index (AQI) to compare air pollution with meteorological and landscape conditions. We found that wind is the major meteorological factor that determines the air quality. For a given wind speed greater than 4 m/sec, the air quality improved significantly. Urban impervious surface also contributes to the severe air pollution: that is, when the fraction of impervious surface increases, there is more severe air pollution. These results suggest that air quality management should be conducted when wind speed is less than 4 m/sec, especially at places with a larger fraction of urban impervious surface.

Place identity and place scale: the impact of place salience.

OpenAIRE

Bernardo, Fátima; Palma-Oliveira, José-Manuel

2013-01-01

Research about place, place identity and attachment supports the idea that bonds with places may differ depending on the place scale. Based on the view that identity is context-dependent, this paper brings to the table the impact of manipulating the salience of place on the intensity of place identity and place attachment reported. A study was designed to examine place identity and place attachment in two groups of residents (permanent and temporary) at three different scales (nei...

Facility Reliability and Maintainability: An Investigation of the Air Force Civil Engineering Recurring Work Program

Science.gov (United States)

1989-09-01

18:2). A recent survey by the Strategic Air Command (SAC) Mechanical Fquipment Management Evaluation Team ( MEMET ) determined that equipment was...identified by MEMET included Maintenance Action Sheets (MAS) that reported work which was not completed, and other MAS which annotated recurring work...readily apparent. Problem Military. The Deputy Chief of Staff for Engineering and Services, HQ SAC, established the MEMET in 1984 in response to a

Testing of nuclear air-cleaning systems

International Nuclear Information System (INIS)

Anon.

1975-01-01

A standard is presented which describes methods for field-testing nuclear power plant air cleaning systems. Included are specifications for visual inspection; duct and housing leak test; mounting frame pressure leak test; airflow capacity, distribution, and residence time tests; air-aerosol mixing uniformity test; in place leak test of HEPA filter banks; multiple sampling technique; in-place leak test of adsorber stage; laboratory testing of adsorbent; and duct heater performance test

78 FR 59731 - License Amendment Request for Closure of Calcium Fluoride Ponds at Honeywell Metropolis Works...

Science.gov (United States)

2013-09-27

... Closure of Calcium Fluoride Ponds at Honeywell Metropolis Works, Honeywell International, Inc. AGENCY... Federal Regulations (10 CFR) to approve the closure of the calcium fluoride ponds in-place, by... areas: Land use; transportation; geology, soils and seismology; hydrology; ecological resources; air...

Making former placed persons visible. Teaching the history of placed persons in Denmark in the 20th Century

DEFF Research Database (Denmark)

Søbjerg, Lene Mosegaard

2017-01-01

are presented and discussed. The main lesson of the dissemination project is that giving a voice to former placed persons is challenging but important. It is important to the former placed persons, to students of social work and social education who are the future caretakers of placed persons and democratic...

Effects of an alternating work shift on air traffic controllers and the relationship with excessive daytime sleepiness and stress.

Science.gov (United States)

Freitas, Ângela M; Portuguez, Mirna Wetters; Russomano, Thaís; Freitas, Marcos de; Silvello, Silvio Luis da Silva; Costa, Jaderson Costa da

2017-10-01

To evaluate symptoms of stress and excessive daytime sleepiness (EDS) in air traffic control (ATC) officers in Brazil. Fifty-two ATC officers participated, based at three air traffic control units, identified as A, B and C. Stress symptoms were assessed using the Lipp Inventory of Stress Symptoms for Adults, and EDS by the Epworth Sleepiness Scale. The sample mean age was 37 years, 76.9% of whom were male. Excessive daytime sleepiness was identified in 25% of the ATC officers, with 84.6% of these based at air traffic control unit A, which has greater air traffic flow, operating a 24-hour alternating work shift schedule. A total of 16% of the ATC officers had stress symptoms, and of these, 62% showed a predominance of physical symptoms. The high percentage of ATC officers with EDS identified in group A may be related to chronodisruption due to night work and alternating shifts.

Development of the air module for the work information management system. Environmental subsystem (WIMS-ES). Master's thesis

Energy Technology Data Exchange (ETDEWEB)

Cantwell, R.A.; Davis, J.S.

1992-09-01

The primary objective of this research was to develop the air module for the Work Information Management System Environmental Subsystem (WIMSES). The air module will provide Air Force environmental managers with a management information system (MIS) to control the growing amount of air pollution data required to stay in compliance with the newly amended Clean Air Act. To develop the air module, the Air Force's air pollution management requirements were researched first. These requirements were then compared to the capabilities of existing air pollution MISs used in the Department of Defense, the Environmental Protection Agency, and in commercial industry. The research led to a draft air nodule that tracks a base's source inventory and associated permit, control equipment, and emission information. Each base's data will be fully accessible to headquarters personnel through the fully networked WIMS-ES. The draft air nodule was validated through an Air Staff review, an Air Force review, and finally, a workshop with Air Force air pollution experts. The finalized air module has been forwarded to the WIMS-ES programmers and will become the Air Force-wide air pollution MIS in early 1993.... Air pollution, Environmental management, Data management, Data bases, Management information systems, Information systems.

Update and revision of WHO air quality guidelines for Europe

Energy Technology Data Exchange (ETDEWEB)

Younes, M. [WHO European Centre for Environment and Health, Bilthoven (Netherlands). Bilthoven Div.

1995-12-31

The WHO Air Quality Guidelines for Europe (AQG), published in 1987, have provided a uniform basis for the development of strategies for the control of air pollution, and have contributed to the maintenance and improvement of public health in several countries. The aim of the guidelines is to provide a basis for protecting public health from adverse effects of air pollutants, and for eliminating or reducing to a minimum, those contaminants that are known or likely to be hazardous to human health and wellbeing. Since the publication of the first edition of the AQG, new scientific data in the fields of air pollution toxicology and epidemiology have accumulated and new developments in risk assessment methodologies have taken place, requiring updating and/or revision of the existing guidelines. This fact was recognized during the preparation of the initial work plan of the European Centre for Environment and Health, and it was recommended that the Centre undertake any necessary amendments and extensions to the Air Quality Guidelines. The updating procedure is being carried out in cooperation with the International Programme on Chemical Safety (IPCS) and the Commission of the European Communities (CEC) and will be implemented through working group meetings which require the preparation of working documents on specific air pollutants or mixtures and a final consultation to discuss the updated document.It was initiated by a Planning Meeting which was organized in January 1993. The purpose of the planning meeting was to set the framework for the updating and revision process, in particular to discuss the scope and purpose, the contents and the format of the revised AQG publication, to define the details of and the time schedule for the updating process and to identify the working groups needed and their way of operation. (author)

Update and revision of WHO air quality guidelines for Europe

Energy Technology Data Exchange (ETDEWEB)

Younes, M [WHO European Centre for Environment and Health, Bilthoven (Netherlands). Bilthoven Div.

1996-12-31

The WHO Air Quality Guidelines for Europe (AQG), published in 1987, have provided a uniform basis for the development of strategies for the control of air pollution, and have contributed to the maintenance and improvement of public health in several countries. The aim of the guidelines is to provide a basis for protecting public health from adverse effects of air pollutants, and for eliminating or reducing to a minimum, those contaminants that are known or likely to be hazardous to human health and wellbeing. Since the publication of the first edition of the AQG, new scientific data in the fields of air pollution toxicology and epidemiology have accumulated and new developments in risk assessment methodologies have taken place, requiring updating and/or revision of the existing guidelines. This fact was recognized during the preparation of the initial work plan of the European Centre for Environment and Health, and it was recommended that the Centre undertake any necessary amendments and extensions to the Air Quality Guidelines. The updating procedure is being carried out in cooperation with the International Programme on Chemical Safety (IPCS) and the Commission of the European Communities (CEC) and will be implemented through working group meetings which require the preparation of working documents on specific air pollutants or mixtures and a final consultation to discuss the updated document.It was initiated by a Planning Meeting which was organized in January 1993. The purpose of the planning meeting was to set the framework for the updating and revision process, in particular to discuss the scope and purpose, the contents and the format of the revised AQG publication, to define the details of and the time schedule for the updating process and to identify the working groups needed and their way of operation. (author)

Place in Pacific Islands Climate Education

Science.gov (United States)

Barros, C.; Koh, M. W.

2015-12-01

Understanding place, including both the environment and its people, is essential to understanding our climate, climate change, and its impacts. For us to develop a sense of our place, we need to engage in multiple ways of learning: observation, experimentation, and opportunities to apply new knowledge (Orr, 1992). This approach allows us to access different sources of knowledge and then create local solutions for local issues. It is especially powerful when we rely on experts and elders in our own community along with information from the global community.The Pacific islands Climate Education Partnership (PCEP) is a collaboration of partners—school systems, nongovernmental organizations, and government agencies—working to support learning and teaching about climate in the Pacific. Since 2009, PCEP partners have been working together to develop and implement classroom resources, curriculum standards, and teacher professional learning opportunities in which learners approach climate change and its impacts first through the lens of their own place. Such an approach to putting place central to teaching and learning about climate requires partnership and opportunities for learners to explore solutions for and with their communities. In this presentation, we will share the work unfolding in the Republic of the Marshall Islands (RMI) as one example of PCEP's approach to place-based climate education. Three weeklong K-12 teacher professional learning workshops took place during June-July 2015 in Majuro, RMI on learning gardens, climate science, and project-based learning. Each workshop was co-taught with local partners and supports educators in teaching climate-related curriculum standards through tasks that can foster sense of place through observation, experimentation, and application of new knowledge. Additionally, we will also share PCEP's next steps in place-based climate education, specifically around emerging conversations about the importance of highlighting

Proposed design for the new SNL air-transporter

International Nuclear Information System (INIS)

Hardy, A.R.; Kennedy, S.T.; Haberlin, M.M.

1988-01-01

The design of a prototype air-transporter suitable for remote operation in a size reduction facility is discussed. The first section describes the design concept selected for the transporter, that of a series of modular units within a simple rigid framework and the detailed design of the individual modules. The design has the following features: electrical drive units, self contained air-skates, electrical logic circuit placed outside the working area, pneumatic and electrical umbilicals and provision for specific items of ancilliary equipment. The second section describes the detailed evaluation of various cable handling systems for the umbilicals from the control console outside the facility to the transporter. It has been established that the optimum system is a single rail festoon complete with transporter mounted pivoting arm. (author)

Heat transfer intensification within tube recuperator by inserting secondary emitters inside air channels

International Nuclear Information System (INIS)

Sandor, P.; Soroka, B.; Kudryavtsev, V.; Zgurskyy, V.

2009-01-01

The research program was stipulated by reduction the service life of the tube recuperators of reheating furnaces at DUNAFERR metallurgical works in Dunaujvaros (Hungary) while replacement the natural gas by coke - oven gas as a furnace fuel took place and air preheating temperature was increased. The tests procedure consists in comparison of temperature and pressure distributions by air flows preheating under air moving inside the tube loops. Advantages of new recuperator design compared to ordinary one have been proven by validation of concept for adequacy to the testing results. The first tests have demonstrated enhancement of local specific and total heat fluxes transferred from flue gases to air flow within the MD tube loops in comparison with those for BD loops by 25 to 45% - dependence on temperature level within the heating (furnace) chamber and on preheated air flow rate. (author)

Ophthalmic requirements and considerations for the en route air traffic control specialist : an ergonomic analysis of the visual work environment.

Science.gov (United States)

1996-04-01

The Federal Air Surgeon requested continued investigation of visual disorders and vision corrective devices as to their relevance to the medical certification of airmen and controllers. The en route Air Traffic Control Specialist (ATCS) works with a ...

Race, space, place: notes on the racialisation and spatialisation of commercial sex work in Dubai, UAE.

Science.gov (United States)

Mahdavi, Pardis

2010-11-01

This paper focuses on the perceived racialisation and resultant spatialisation of commercial sex in Dubai. In recent years, the sex industry in Dubai has grown to include women from the Middle East, Eastern Europe, East Asia and Africa. With the increase in sex workers of different nationalities has come a form of localised racism that is embedded in structures and desires seen within specific locations. The physical spatialisation of sex work hinges on perceived race and produces distinct income generating potential for women engaged in the sex industry in Dubai. The social and physical topography of Dubai is important in marginalising or privileging these various groups of sex workers, which correlates race, space and place with rights and assistance. I begin with a description of the multidirectional flows of causality between race, space, place and demand. I then discuss how these various groups are inversely spatialised within the discourse on assistance, protection and rights. The findings presented here are based on ethnographic research conducted with transnational migrants in the UAE in 2004, 2008 and 2009.

Air distribution system with the discharge action in the working cavity of downhole air hammer drills

Science.gov (United States)

Timonin, VV; Alekseev, SE; Kokoulin, DI; Kubanychbek, B.

2018-03-01

It is proposed to carry out pre-mine methane drainage using underground degassing holes made by downhole air hammer drills. The features of downhole air drills are described. The downhole air drill layout with the simple-shape striking part is presented with its pluses and minuses. The researchers point at available options to eliminate the shortcomings. The improved layout of the downhole air hammer drill is suggested. The paper ends with the test data on the prototype air hammer drill, its characteristics and trial drilling results.

Analyzing Gender in Public Places: Rethinking Goffman's Vision of Everyday Life.

Science.gov (United States)

Gardner, Carol Brooks

1989-01-01

Discusses Erving Goffman's work on public places with regard to how that work represents women's experience in public places. Reviews strategies that women devise to manage appearances in public places in order to illustrate how gender-conscious appraisal is necessary to appreciate the character of public places. (Author/LS)

Experimental characterization of mass, work and heat flows in an air cooled, single cylinder engine

International Nuclear Information System (INIS)

Perez-Blanco, H.

2004-01-01

Small air cooled engines, although large in numbers, receive scant attention in the literature. Experimental data for a four stroke, air cooled, single cylinder engine are presented in this report. Air to fuel ratios, indicated and output power, exhaust composition and heat loss are determined to result in suitable thermal and mechanical efficiencies. The data obtained are discussed with the perspective obtained from other literature references. Exhaust composition figures appear reasonable, but the measurement of the transient exhaust flows is still a concern. Based on the measurements, a graph illustrating the different energy transformations in the engine is produced. Undergraduate students in the curriculum routinely use the engine and the present work allows one to conclude that the measurement approach produces reasonable results. These results could be used by engine modelers and others interested in this wide field of technology

Task-Oriented and Relationship-Building Communications between Air Traffic Controllers and Pilots

Directory of Open Access Journals (Sweden)

Inwon Kang

2017-09-01

Full Text Available By questioning the lopsided attention on task-oriented factors in air traffic controller-pilot communication, the current study places an equal weighting on both task-oriented and relationship-building communications, and investigates how each type of communication influences sustainable performance in airline operation team. Results show that both task-oriented and relationship-building communications in terms of sustainability of team process predicted greater communication satisfaction at work. Also, both task interdependence and shared leadership influenced both types of air traffic controller-pilot communication. However, only relationship-building communication had a direct influence on perceived work performance whereas task-oriented communication had not. Along with task-oriented factors, this study raises the relationship-oriented factors as important resources for the sustainable team performance in airline industry.

Evaluation of air pollution due to natural radioactive elements; Evaluacion de contaminacion del aire debido a elementos radiactivos naturales

Energy Technology Data Exchange (ETDEWEB)

Perez, B. A.; Lopez, M. E., E-mail: bertin.perez@pucp.edu.pe [Pontificia Universidad Catolica del Peru, Seccion Fisica, Av. Universitaria 1801, San Miguel, Lima (Peru)

2014-08-15

The presence of radioactive materials in the crustal and as consequence present in the surface, originate the natural radioactive contamination in the different solid, liquid and gaseous materials; particularly in the air that we breathe. Among these radioactive materials that contribute to the environmental pollution are the presences of uranium, radio, thorium and their respective disintegration chains, as the gas radon (Rn-222) that spreads in the air; whose presence increases in areas where the seismic activity is notorious or other natural events take place, case of the Lima (Peru) City. In this work we show the measurements realized during two consecutive years in the roof of a building of three floors in the Lima City, with the purpose of establishing the fluctuations of this gassy pollutant in the surrounding air. The measurements were made using nitrocellulose detectors (Lr-115 type 2) applying the nuclear prints technique. The obtained results allowing to have an indicator of the Rn-222 presence in the air during different seasons of the year and also the presence of other possible radioactive pollutants. The use of this technique allows obtaining and studying the prints that generate the alpha particles that are emitted during the Rn-222 disintegration or by means of their descendants or predecessors; also allowing to discriminate between the short-range tracers or lineal type prints and other very different prints obtained during some of the measurements. The results analyzed according to proposed models are presented in this work. (author)

Influence of air pollution on exhaled carbon monoxide levels in smokers and non-smokers. A prospective cross-sectional study.

Science.gov (United States)

Maga, Mikołaj; Janik, Maciej K; Wachsmann, Agnieszka; Chrząstek-Janik, Olga; Koziej, Mateusz; Bajkowski, Mateusz; Maga, Paweł; Tyrak, Katarzyna; Wójcik, Krzysztof; Gregorczyk-Maga, Iwona; Niżankowski, Rafał

2017-01-01

The poor air quality and cigarette smoking are the most important reasons for increased carbon monoxide (CO) level in exhaled air. However, the influence of high air pollution concentration in big cities on the exhaled CO level has not been well studied yet. To evaluate the impact of smoking habit and air pollution in the place of living on the level of CO in exhaled air. Citizens from two large cities and one small town in Poland were asked to complete a survey disclosing their place of residence, education level, work status and smoking habits. Subsequently, the CO level in their exhaled air was measured. Air quality data, obtained from the Regional Inspectorates of Environmental Protection, revealed the differences in atmospheric CO concentration between locations. 1226 subjects were divided into 4 groups based on their declared smoking status and place of living. The average CO level in exhaled air was significantly higher in smokers than in non-smokers (p<0.0001) as well as in non-smokers from big cities than non-smokers from small ones (p<0.0001). Created model showed that non-smokers from big cities have odds ratio of 125.3 for exceeding CO cutoff level of 4ppm compared to non-smokers from small towns. The average CO level in exhaled air is significantly higher in smokers than non-smokers. Among non-smokers, the average exhaled CO level is significantly higher in big city than small town citizens. These results suggest that permanent exposure to an increased concentration of air pollution and cigarette smoking affect the level of exhaled CO. Copyright © 2016 Elsevier Inc. All rights reserved.

Does Work Place Sexual Harassment Matter?

OpenAIRE

Subhani, Muhammad Imtiaz

2012-01-01

Today's workplace is diverseand constantly altering. The conventional employer/employee relationship of past has been turned upside down. Employees are living in a diverse and growing economy and have almost unlimited job opportunities but they face the bad times of recession too. The overall work environment and global economy are rapidly changing that leaves no space for definite forecasting. These factors have created an environment where the business is in need of its employees more and n...

Call-centre occupant response to new and used filters at two outdoor air supply rates

DEFF Research Database (Denmark)

Wargocki, Pawel; Wyon, David; Nielsen, J.

2002-01-01

A 2x2 replicaterd field intervention experiment was conducted in a call-centre providing a public telephone directory service: outdoor air supply rate was 8% or 80% of the total airflow of 430 L/s providing 3.5 h-1; and the supply air filters were either new or used (i.e. used in place for 6 mont......). Each of these 4 conditions was maintained for a full working week at a time. Room temperature and humidity averaged 24 deg.C and 27% RH. The 26 operators were blind to conditions and assessed perceived air quality (PAQ), the intensity of Sick Building Syndrome (SBS) symnptoms and self...

Analysis of the work of air traffic controllers of the approach control area (APP) of Porto Alegre, Brazil.

Science.gov (United States)

Vargas, C V; Guimarães, L B de M; Sant'Anna, A M O

2012-01-01

This article presents a study on the activities of the air traffic controllers of the Approach Control Area (APP) of Porto Alegre, Brazil, in different real scenarios. Based on interviews, questionnaires and the analysis of film of real scenes, the following were identified and analyzed: i) the perceptions of risk and complexity of the different air traffic scenes observed; ii) the cognitive factors (knowledge, strategy and attention dynamics) involved in the task and iii) the perception of the controller's workload. The results showed that the task complexity depends on the weather conditions, the number and type of aircraft in observation and that the controllers perceive the scenes in a similar way irrespective of their time in the profession and the type of control (radar or coordination). Attention is the cognitive factor with the greatest impact on the work and mental demand has the greatest impact on workload followed by time demand. The literature on the controllers work in Brazil is scarce and, therefore, this study aimed to contribute to the understanding of the work in one APP in order to promote future changes in the very problematic Brazilian air traffic system.

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 19.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 11-13.09.06 E ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E EXCEL 2003 (Short Course I) - HowTo... Work with formulae 3 15.09.06 E/F WORD 2003 (Short Course III) - HowTo... Work with long docu...

Microbial Contamination on Used Surgical Masks among Hospital Personnel and Microbial Air Quality in their Working Wards: A Hospital in Bangkok.

Science.gov (United States)

Luksamijarulkul, Pipat; Aiempradit, Natkitta; Vatanasomboon, Pisit

2014-09-01

To assess the relationship of bacterial and fungal contamination on used surgical masks worn by the hospital personnel and microbial air quality in their working wards. This is a cross-sectional study of 230 used surgical masks collected from 214 hospital personnel, and 215 indoor air samples collected from their working wards to culture for bacterial and fungal counts. This study was carried out at the hospital in Bangkok. Group or genus of isolated bacteria and fungi were preliminarily identified by Gram's stain and lacto-phenol cotton blue. Data were analyzed using paired t-test and Pearson's correlation coefficient at the significant level of pcontamination on inside area of the used masks were 47 ± 56 and 15 ± 9 cfu/ml/piece, and on outside area were 166 ± 199 and 34 ± 18 cfu/ml/piece, respectively, pcontamination on used masks from hospital personnel working in the male and female medical wards and out-patient department, as well as the bacterial and fungal counts of the indoor air sample collected from the same area were relatively higher than the other wards. The predominant isolated bacteria and fungi contaminated on inside and outside areas of the used masks and air samples were similar (Staphylococcus spp. and Aspergillus spp.; respectively). For its relationship, results found that bacterial and fungal counts in air samples showed significantly positive correlation with the bacterial contamination load on outside area of the used masks, r=0.16, p=0.018 and r=0.21, p=0.003, respectively. High bacterial contamination on outside area of the used masks was demonstrated, and it showed a significant correlation with microbial air quality of working wards.

Auto-ignition of lubricating oil working at high pressures in a compressor for an air conditioner

Energy Technology Data Exchange (ETDEWEB)

Kim, Chul Jin; Choi, Hyo Hyun [Department of Mechanical Engineering, Sejong University, Seoul 143-747 (Korea, Republic of); Sohn, Chae Hoon, E-mail: chsohn@sejong.ac.kr [Department of Mechanical Engineering, Sejong University, Seoul 143-747 (Korea, Republic of)

2011-01-15

Auto-ignition of lubricating oil working in a compressor for an air conditioner is studied experimentally. The adopted lubricating oil is an unknown mixture with multi-components and known to have flash point temperature of 170 deg. C. First, its auto-ignition temperature is measured 365 deg. C at atmospheric pressure. The lubricating oil works under high-pressure condition up to 30 atm and it is heated and cooled down repeatedly. Accordingly, auto-ignition temperatures or flammable limits of lubricating oil are required at high pressures with respect to fire safety. Because there is not a standard test method for the purpose, a new ignition-test method is proposed in this study and thereby, auto-ignition temperatures are measured over the pressure range below 30 atm. The measured temperatures range from 215 deg. C to 255 deg. C and they strongly depend on pressure of gas mixture consisting of oil vapor, nitrogen, and oxygen. They are close to flash point temperature and the lubricating oil can be hazardous when it works for high-pressure operating condition and abundant air flows into a compressor.

Auto-ignition of lubricating oil working at high pressures in a compressor for an air conditioner

International Nuclear Information System (INIS)

Kim, Chul Jin; Choi, Hyo Hyun; Sohn, Chae Hoon

2011-01-01

Auto-ignition of lubricating oil working in a compressor for an air conditioner is studied experimentally. The adopted lubricating oil is an unknown mixture with multi-components and known to have flash point temperature of 170 deg. C. First, its auto-ignition temperature is measured 365 deg. C at atmospheric pressure. The lubricating oil works under high-pressure condition up to 30 atm and it is heated and cooled down repeatedly. Accordingly, auto-ignition temperatures or flammable limits of lubricating oil are required at high pressures with respect to fire safety. Because there is not a standard test method for the purpose, a new ignition-test method is proposed in this study and thereby, auto-ignition temperatures are measured over the pressure range below 30 atm. The measured temperatures range from 215 deg. C to 255 deg. C and they strongly depend on pressure of gas mixture consisting of oil vapor, nitrogen, and oxygen. They are close to flash point temperature and the lubricating oil can be hazardous when it works for high-pressure operating condition and abundant air flows into a compressor.

Numerical analysis of an air condenser working with the refrigerant fluid R407C

International Nuclear Information System (INIS)

Aprea, Ciro; Maiorino, Angelo

2007-01-01

As CFC (clorofluorocarbon) and HCFC (hydrochlorofluorocarbon) refrigerants which have been used as refrigerants in a vapour compression refrigeration system were know to provide a principal cause to ozone depletion and global warming, production and use of these refrigerants have been restricted. Therefore, new alternative refrigerants should be searched for, which fit to the requirements in an air conditioner or a heat pump, and refrigerant mixtures which are composed of HFC (hydrofluorocarbon) refrigerants having zero ODP (ozone depletion potential) are now being suggested as drop-in or mid-term replacement. However also these refrigerants, as the CFC and HCFC refrigerants, present a greenhouse effect. The zeotropic mixture designated as R407C (R32/R125/R134a 23/25/52% in mass) represents a substitute of the HCFC22 for high evaporation temperature applications as the air-conditioning. Aim of the paper is a numerical-experimental analysis for an air condenser working with the non azeotropic mixture R407C in steady-state conditions. A homogeneous model for the condensing refrigerant is considered to forecast the performances of the condenser; this model is capable of predicting the distributions of the refrigerant temperature, the velocity, the void fraction, the tube wall temperature and the air temperature along the test condenser. Obviously in the refrigerant de-superheating phase the numerical analysis becomes very simple. A comparison with the measurements on an air condenser mounted in an air channel linked to a vapour compression plant is discussed. The results show that the simplified model provides a reasonable estimation of the steady-state response and that this model is useful to design purposes

Determination of the air attenuation and electronic loss for the free air concentric cylinders ionization chamber; Determinacao da atenuacao do ar e perda eletronica para a camara de ionizacao de ar livre de cilindros concentricos

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Hebert Pinto Silveira de

2010-07-01

Along the latest years, the LNMRI has been proceeding a continuous research work with a concentric cylinders type free air ionizing chamber (VICTOREEN, model 481), aiming to establish it as a new national standard, and, as a consequence, replace the worldwide accepted secondary standard, calibrated by PTB. Taking into account that the absolute determination of kerma in air with a free air ionizing chamber implies the acquirement of a number of correction factors. The main objective of the present work comprises the determination of the two factors, specifically, electronic loss (k{sub e}) and air attenuation (k{sub a}). The correction factors were obtained through mammography qualities reference spectrum, using Monte Carlo simulation method. The Penelope code was used in the simulation procedures. Simulations took place in two stages, the acquirement of specters related to the qualities of interest (mammography) with the x ray tube (Pantak, model HF160 e Panalytical, model XRF window), and the free-air ionization chamber. The data were compared to those related to the BIPM chamber, to electronic loss were not detected. The comparison between air attenuation factors was obtained data bellow 0.13%. (author)

The 1994 list of limiting values. Safety and hygiene at work

International Nuclear Information System (INIS)

Pflaumbaum, W.; Kleine, H.; Barig, A.; Nies, E.; Blome, H.; Deiniger, C.; Christ, E.; Siekmann, H.; Fischer, S.; Kupfer, J.; Kaulbars, U.; Pfeiffer, W.; Kreutzkampf, F.; Zilligen, H.; Zinken, E.; Boerner, F.; Kloss, G.; Pfeiffer, B.

1994-09-01

This book contains the most important limiting values for chemical, biological and physical effects on persons relevant to safety and hygiene at work. The section on chemical effects falls into two chapters: maximum working site concentrations of hazardous substances (MAK and TRK values), and limiting and recommended values for hazardous substances in indoor and external air. Regarding biological effects, limiting values for exposure at work do not exist. Therefore, this section looks mainly at the basic demands on work places. The section on physical effects contains limiting values and explanations regarding the following areas: noise, vibration, thermal stress, radiation and biomechanical stress (lifting and carrying of heavy weights). (orig./MG) [de

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magn&...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work ...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCESS 2003 - Level 2 - ECDL AM5: 5 - 8.7.2005 (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 8.7.2005 (aftern...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 6.7.2005 (morning) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 7.7.2005 (morning) OUTLOOK (Short Course III) - Meetings and Delegation: 8.7.2005 (morning) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format y...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 28.6 - 1.7.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCES...

Using a New Modification on Wind Turbine Ventilator for Improving Indoor Air Quality

Directory of Open Access Journals (Sweden)

Louay Abdul salam Rasheed

2018-02-01

Full Text Available This paper describes a newly modified wind turbine ventilator that can achieve highly efficient ventilation. The new modification on the conventional wind turbine ventilator system may be achieved by adding a Savonius wind turbine above the conventional turbine to make it work more efficiently and help spinning faster. Three models of the Savonius wind turbine with 2, 3, and 4 blades' semicircular arcs are proposed to be placed above the conventional turbine of wind ventilator to build a hybrid ventilation turbine. A prototype of room model has been constructed and the hybrid turbine is placed on the head of the room roof. Performance's tests for the hybrid turbine with a different number of blades and different values of wind speeds have been conducted. The experimental test results show that the performance of the improved ventilation turbine with three blades is the best. It is found that the maximum rotation speed of the improved turbine is 107rpm, while the air flow rate is 0.0103m3/s and the air change rate per hour is 32.67hr-1, at a wind speed of 3m/s. The proposed design has been achieved an increase in the turbine rotational speed, increase of the extraction rate of the indoor air and the air-changes per hour, provided the requisite ventilation and improved the quality of the indoor air.

Prospective randomized trial compares suction versus water seal for air leaks.

Science.gov (United States)

Cerfolio, R J; Bass, C; Katholi, C R

2001-05-01

Surgeons treat air leaks differently. Our goal was to evaluate whether it is better to place chest tubes on suction or water seal for stopping air leaks after pulmonary surgery. A second goal was to evaluate a new classification system for air leaks that we developed. Patients were prospectively randomized before surgery to receive suction or water seal to their chest tubes on postoperative day (POD) #2. Air leaks were described and quantified daily by a classification system and a leak meter. The air-leak meter scored leaks from 1 (least) to 7 (greatest). The group randomized to water seal stayed on water seal unless a pneumothorax developed. On POD #2, 33 of 140 patients had an air leak. Eighteen patients had been preoperatively randomized to water seal and 15 to suction. Air leaks resolved in 12 (67%) of the water seal patients by the morning of POD #3. All 6 patients whose air leak did not stop had a leak that was 4/7 or greater (p leak meter. Of the 15 patients randomized to suction, only 1 patient's air leak (7%) resolved by the morning of POD #3. The randomization aspect of the trial was ended and statistical analysis showed water seal was superior (p = 0.001). The remaining 14 patients were then placed to water seal and by the morning of POD #4, 13 patients' leaks had stopped. Of the 32 total patients placed to seal, 7 (22%) developed a pneumothorax and 6 of these 7 patients had leaks that were 4/7 or greater (p = 0.001). Placing chest tubes on water seal seems superior to wall suction for stopping air leaks after pulmonary resection. However, water seal does not stop expiratory leaks that are 4/7 or greater. Pneumothorax may occur when chest tubes are placed on seal with leaks this large.

Flextime: A Modified Work Force Scheduling Technique for Selected Headquarters Air Force Logistics Command Organizations.

Science.gov (United States)

Kimzey, Reed T.; Prince, Samuel M. O.

The thesis discusses the advantages and disadvantages of one work force scheduling technique--flextime. The authors were interested in determining if a flextime schedule could be put into effect in a governmental organization such as Headquarters Air Force Logistics Command (AFLC). The study objectives were to determine the feasibility,…

Building the Brain's "Air Traffic Control" System: How Early Experiences Shape the Development of Executive Function. Working Paper 11

Science.gov (United States)

National Scientific Council on the Developing Child, 2011

2011-01-01

Being able to focus, hold, and work with information in mind, filter distractions, and switch gears is like having an air traffic control system at a busy airport to manage the arrivals and departures of dozens of planes on multiple runways. In the brain, this air traffic control mechanism is called executive functioning, a group of skills that…

Adsorption cold storage system with zeolite-water working pair used for locomotive air conditioning

International Nuclear Information System (INIS)

Lu, Y.Z.; Wang, R.Z.; Zhang, M.; Jiangzhou, S.

2003-01-01

Adsorption cold storage has lately attracted attention for its large storage capacity and zero cold energy loss during the storing process. Thermodynamic and experimental studies on the cold storage capacity and the cold discharging process, in which the adsorber is either air cooled or adiabatic, have been presented. An adsorption cold storage system with zeolite-water working pair has been developed, and some operating results are summarized. This system is used for providing air conditioning for the driver's cab of an internal combustion locomotive. Unlike a normal adsorption air conditioner, the system starts running with the adsorption process, during which the cold energy stored is discharged, and ends running with the generation process. The adsorbent temperature decreases during the cold storing period between two runs. The refrigeration power output for the whole running cycle is about 4.1 kW. It appears that such a system is quite energetically efficient and is comparatively suitable for providing discontinuous refrigeration capacity when powered by low grade thermal energy, such as industrial exhausted heat or solar energy

L’Aquila Smart Clean Air City: The Italian Pilot Project for Healthy Urban Air

Directory of Open Access Journals (Sweden)

Alessandro Avveduto

2017-11-01

Full Text Available Exposure to atmospheric pollution is a major concern for urban populations. Currently, no effective strategy has been adopted to tackle the problem. The paper presents the Smart Clean Air City project, a pilot experiment concerning the improvement in urban air quality. Small wet scrubber systems will be operating in a network configuration in suitable urban areas of L’Aquila city (Italy. The purpose of this work is to describe the project and show the preliminary results obtained in the characterization of two urban sites before the remediation test; the main operating principles of the wet scrubber system will be discussed, as well as the design of the mobile treatment plant for the processing of wastewater resulting from scrubber operation. Measurements of particle size distributions in the range of 0.30–25 µm took place in the two sites of interest, an urban background and a traffic area in the city of L’Aquila. The mean number concentration detected was 2.4 × 107 and 4.5 × 107 particles/m3, respectively. Finally, theoretical assessments, performed by Computational Fluid Dynamics (CFD codes, will show the effects of the wet scrubber operation on air pollutants under different environmental conditions and in several urban usage patterns.

Microbial Contamination on Used Surgical Masks among Hospital Personnel and Microbial Air Quality in their Working Wards: A Hospital in Bangkok

Directory of Open Access Journals (Sweden)

Pipat Luksamijarulkul

2014-09-01

Full Text Available Objective: To assess the relationship of bacterial and fungal contamination on used surgical masks worn by the hospital personnel and microbial air quality in their working wards. Methods: This is a cross-sectional study of 230 used surgical masks collected from 214 hospital personnel, and 215 indoor air samples collected from their working wards to culture for bacterial and fungal counts. This study was carried out at the hospital in Bangkok. Group or genus of isolated bacteria and fungi were preliminarily identified by Gram’s stain and lacto-phenol cotton blue. Data were analyzed using paired t-test and Pearson’s correlation coefficient at the significant level of p<0.050. Results: Means and standard deviation of bacterial and fungal contamination on inside area of the used masks were 47 ± 56 and 15 ± 9 cfu/ml/piece, and on outside area were 166 ± 199 and 34 ± 18 cfu/ml/piece, respectively, p<0.001. The bacterial and fungal contamination on used masks from hospital personnel working in the male and female medical wards and out-patient department, as well as the bacterial and fungal counts of the indoor air sample collected from the same area were relatively higher than the other wards. The predominant isolated bacteria and fungi contaminated on inside and outside areas of the used masks and air samples were similar (Staphylococcus spp. and Aspergillus spp.; respectively. For its relationship, results found that bacterial and fungal counts in air samples showed significantly positive correlation with the bacterial contamination load on outside area of the used masks, r=0.16, p=0.018 and r=0.21, p=0.003, respectively. Conclusion: High bacterial contamination on outside area of the used masks was demonstrated, and it showed a significant correlation with microbial air quality of working wards.

Melanie Klein in Buenos Aires: beginnings and developments.

Science.gov (United States)

Etchegoyen, R Horacio; Zysman, Samuel

2005-06-01

In the first decades of the 20th century, Freud was known and quoted in Latin America by an elite of enlightened minds. In the 1940s a convergence took place in Buenos Aires of European exiles with local pioneers, and thus the Argentine Psychoanalytical Association was founded in 1942. Since then psychoanalysis has grown steadily and has spread into hospitals and universities, influencing culture at large. The socioeconomic situation of that time permitted this phenomenon to develop, to the astonishment of observers. In this paper the authors study the strong influence of Kleinian thought during the first 30 years of this development. The original works of local thinkers constitute the intellectual capital that sustains the idea of an 'Argentine psychoanalytic school'. During the 1970s, both society and psychoanalysis endured deep and complex changes. Lacan's teachings gained support and Klein's influence began to decline. At present the Buenos Aires Kleinians keep working, while their relationship with Lacanians and other schools is calmer. Respectful discussions became thus possible, oriented to strictly scientific differences.

Glucose changes and working memory in individuals with type 1 diabetes during air pressure changes simulating skydiving.

Science.gov (United States)

Yousef, Mohammad; Westman, Anton; Lindberg, Ann; de Lacerda, Cecilia; Jendle, Johan

2014-01-01

Several countries restrict individuals with type 1 diabetes mellitus (T1DM) from skydiving because of concerns over possible alterations in consciousness. To our knowledge, glucose levels and working memory in individuals with T1DM during skydiving have not been assessed earlier. The objective of this study was to investigate changes in glucose levels and working memory in selected subjects with T1DM compared with control subjects without diabetes mellitus (DM) during ambient air pressure changes as those anticipated during standard skydiving. Six subjects with T1DM and six controls were included. Using a hypobaric chamber, the ambient air pressure was changed to simulate a standard skydive from 4,000 m (13,000 feet) above mean sea level. The procedure was repeated six times to mimic a day of skydiving activity with a median of 8.7 h/day (5(th), 95(th) percentile: 8.1, 9.8 h). All subjects carried a continuous glucose monitor (CGM). Capillary glucose tests were taken in order to calibrate the CGM. Hemoglobin oxygen saturation, heart rate, and working memory, evaluated through digit span, were monitored regularly. No subject experienced documented symptomatic hypoglycemia with impaired working memory during the simulations. One asymptomatic hypoglycemia episode with a plasma glucose level of glucose levels. Interstitial glucose levels of memory between the T1DM patients and the controls. This study of interstitial glucose levels and working memory could not show the activity-specific risk factor (i.e., repetitive rapid-onset hypobaric hypoxia exposures) to be a greater safety concern for selected subjects with T1DM compared with subjects without DM during a simulated day of skydiving. Further studies are needed to clarify the suitability of subjects with T1DM to participate in this air sport.

Design and application of air-conditioning suit based on eddy current cooling principle for distribution network working with power uninterrupted

Science.gov (United States)

Xu, Li; Liu, Lanlan; Niu, Jie; Tang, Li; Li, Jinliang; Zhou, Zhanfan; Long, Chenhai; Yang, Qi; Yi, Ziqi; Guo, Hao; Long, Yang; Fu, Yanyi

2017-05-01

As social requirement of power supply reliability keeps rising, distribution network working with power uninterrupted has been widely carried out, while the high - temperature operating environment in summer can easily lead to physical discomfort for the operators, and then lead to safety incidents. Aiming at above problem, air-conditioning suit for distribution network working with power uninterrupted has been putted forward in this paper, and the structure composition and cooling principle of which has been explained, and it has been ultimately put to on-site application. The results showed that, cooling effect of air-conditioning suits was remarkable, and improved the working environment for the operators effectively, which is of great significance to improve Chinese level of working with power uninterrupted, reduce the probability of accidents and enhance the reliability of power supply.

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 16-02-06 E-F WORD 2003 (Short Course III) - HowTo... Work with long documents 3 16-02-06 E-F CERN EDMS - Introduction 8 21.02.06 E OUTLOOK 2003 (Short Course III) - Meetings and Delegation 3 27-02-06 E-F WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27-02-06 E-F JAVA: Level 2 32 28-02-06 to 03-03-06 E Manipulation des images 4 28.02.06 F ACCESS 2003 - Level 2: ECDL AM5 16 02 to 03-03-06 E-F FrontPage 2003 - niveau 2 16 02 to 03-03-06 F C++ for Particle Physicists 20 06 to 10-03-06 E FileMaker - niv...

Estimation of air quality by air pollution indices

International Nuclear Information System (INIS)

Liblik, Valdo; Kundel, Helmut

1999-01-01

A novel system for estimating the quality of atmospheric air in the over-ground air layer with the help of air pollution indices was developed. The method is based on a comparison of measured or calculated maximum short-term concentrations and average annual concentrations of pollutants with maximum permissible concentrations (with regard to human beings and vegetation). Special air quality estimation scales for residential areas and natural systems are presented. On the basis of the concentration of the substance under study zones of very high, high, rather high, moderate, low and very low air pollution were distinguished in the over-ground layer of the atmosphere. These are projected to land surface for landscape zonation. The application of the system of indices is demonstrated in the analysis of air quality for the towns of Kohtla-Jarve, Johvi and Kivioli (in 1997-1998). A comparative analysis of the air pollution zones distinguished on the basis of emissions and data from bio monitoring yielded satisfactory results. The system of air pollution indices developed enables to process the results of air monitoring in case of pollution fields of complicated composition so that the result for estimating the quality of ambient air in a residential area is easily understood by inhabitants and interpretable with the help of a special scale; analyse temporal changes in the quality of the air in towns, villages and other residential areas and use the results as basis for developing measures for reducing the pollution of ambient air; carry out zonation of large territories on the basis of air pollution levels (spatial air pollution zones are projected on the ground surface) and estimate air quality in places where air monitoring is lacking to forecast the possible effect of air pollution on natural systems (author)

An Analyses and Solution Proposals Toward Social Gender Equality Problems in Business Life at Work Place in Turkey

OpenAIRE

Ayse Kocabacak; Cumali Kalkan

2015-01-01

Gender inequality is a problem in the World as well as in Turkey. What is referred by this problem here is the gender discrimination and thus inequality and injustice in opportunities that women face in a society. It appears in different forms in business life or at work place (inequalities in employment, wages, social benefits and education as well as obstacles in career rise, easy dismissal or layoff, sexual harassment / persecution / mobbing, etc.). In this study, this problem is investiga...

Auto-ignition of lubricating oil working at high pressures in a compressor for an air conditioner.

Science.gov (United States)

Kim, Chul Jin; Choi, Hyo Hyun; Sohn, Chae Hoon

2011-01-15

Auto-ignition of lubricating oil working in a compressor for an air conditioner is studied experimentally. The adopted lubricating oil is an unknown mixture with multi-components and known to have flash point temperature of 170 °C. First, its auto-ignition temperature is measured 365 °C at atmospheric pressure. The lubricating oil works under high-pressure condition up to 30 atm and it is heated and cooled down repeatedly. Accordingly, auto-ignition temperatures or flammable limits of lubricating oil are required at high pressures with respect to fire safety. Because there is not a standard test method for the purpose, a new ignition-test method is proposed in this study and thereby, auto-ignition temperatures are measured over the pressure range below 30 atm. The measured temperatures range from 215 °C to 255 °C and they strongly depend on pressure of gas mixture consisting of oil vapor, nitrogen, and oxygen. They are close to flash point temperature and the lubricating oil can be hazardous when it works for high-pressure operating condition and abundant air flows into a compressor. Copyright © 2010 Elsevier B.V. All rights reserved.

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framew...

THE PLACES FOR PARTICIPATION

Directory of Open Access Journals (Sweden)

Tania Carson

2007-09-01

Full Text Available The current upsurge of interest in street art with its direct approach to the city emphasizes the need to readdress public arts’ role within the wider social and cultural context. As it becomes routine to incorporate art works into city planning and city life, art has become both ‘safe’ and ‘user‐friendly’. On the one hand, art is subsumed and immersed into the wider culture through leisure and entertainment policies, socially engaged public art projects, community art and urban design. On the other hand, there are those works which deliberately intend to unsettle or confront the viewer. In recent years the term intervention has been ascribed to unorthodox art works in the public sphere which are often illicit, or at least non‐complicit in the prevailing hegemony. These practices are disruptive due to their enactment outside traditional art spaces, often in the streets. By occupying the streets, places of democracy and disjunction, these interventions transform public space back into a place of overt cultural and political expression. They also deliberately involve the inhabitants of the city by utilizing everyday spaces in ways which offer an unmediated sense of the artwork.

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW base 1 : 5 - 7.9.2005 (3 jours) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechniq...

Colorectal injury by compressed air--a report of 2 cases.

Science.gov (United States)

Suh, H. H.; Kim, Y. J.; Kim, S. K.

1996-01-01

We report two colorectal trauma patients whose rectosigmoid region was ruptured due to a jet of compressed air directed to their anus while they were playing practical jokes with their colleagues in their place of work. It was difficult to diagnose in one patient due to vague symptoms and signs and due to being stunned by a stroke of the compressed air. Both patients suffered from abdominal pain and distension, tension pneumoperitoneum and mild respiratory alkalosis. One patient was treated with primary two layer closure, and the other with primary two layer closure and sigmoid loop colostomy. Anorectal manometry and transanal ultrasonography checked 4 weeks after surgery, revealed normal anorectal function and anatomy. The postoperative courses were favorable without any wound infection or intraabdominal sepsis. PMID:8835767

Heat Recovery Ventilation for Housing: Air-to-Air Heat Exchangers.

Science.gov (United States)

Corbett, Robert J.; Miller, Barbara

The air-to-air heat exchanger (a fan powered ventilation device that recovers heat from stale outgoing air) is explained in this six-part publication. Topic areas addressed are: (1) the nature of air-to-air heat exchangers and how they work; (2) choosing and sizing the system; (3) installation, control, and maintenance of the system; (4) heat…

The performance and subjective responses of call-center operators with new and used supply air filters at two outdoor air supply rates

DEFF Research Database (Denmark)

Wargocki, Pawel; Wyon, David; Fanger, Povl Ole

2004-01-01

A 2X2 replicated field intervention experiment was conducted in a call-center providing a telephone directory service: outdoor air supply rate was adjusted to be 8% of the total airflow of 430 l/s (3.5/h)and the supply air filters were either new or had been in place for 6 months. One of these in......A 2X2 replicated field intervention experiment was conducted in a call-center providing a telephone directory service: outdoor air supply rate was adjusted to be 8% of the total airflow of 430 l/s (3.5/h)and the supply air filters were either new or had been in place for 6 months. One...

Influence of air pollution on the fruiticulous and foliaceous lichen flora around the shale oil works at Kvarntorp in the province of Naerke

Energy Technology Data Exchange (ETDEWEB)

Skye, E

1958-01-01

During the blockade years in the beginning of the 1940's was founded a government-owned shale oil works at Kvarntorp, approximately six miles east of Kumla in Naerke. Even the first few years the smoke gases from the works caused great damage to the surrounding forest and fields, and the State Institute for Plant Preservation was soon involved in the problem. In 1948 the Institute performed the first investigations, which were followed by others, among them the years 1949 and 1953. During these investigations the Chief of the Botanical Department of the Institute, began to observe that the lichens apparently reacted to the smoke gases. It occurred to him to suggest an examination of the lichen vegetation, and his idea was that perhaps some lichen species could serve as an indicator of the effect of the smoke gases. As distinguished from leaves and needle-foliage the lichens remain in place a very long number of years and are therefore subjected to influence during a longer period of time. Two questions consequently had to be answered: (1) Is the lichen vegetation damaged by the smoke gases. (2) Can a suitable indicator of air pollutants among the lichens be found. If so, it should be a common and easily identified species. The present work will only give a partial answer to this question. 79 references, 9 figures.

Experimental modeling of aerosols produced by microorganisms in working area air as risk factor exerting hazardous impacts on health of workers employed at biotechnological production

Directory of Open Access Journals (Sweden)

N.V. Dudchik

2017-09-01

Full Text Available Scientific foundation and practices in the sphere of hygienic and ecological standardization concerning biological factors of the environment have a number of peculiarities and are methodically less developed than chemical factors standardization. Efficient industrial control over maximum permissible concentrations of standardized microorganisms-producers in working area air is based on validated instrumental techniques of quantitative assessment. Our goal was to create experimental models for microorganisms-producers' aerosols of a multi-component microbe specimen in working area air as a risk factor causing impacts on health of workers employed at biotechnological production; another task was to work out a procedure for measuring Pseudomonas aurantiaca B-162/255.17concentration and cells and spores of Bacillus sp. BB58-3 strain in working area air. We gave grounds for a technology aimed at quantitative determination of microorganisms-producers in working area air in a modeling experiment; it was based on conventional stages and tech-niques accepted in microbiological practices, namely air samples taking via aspiration technique allowing for a volume taken; cultivation under conditions which are optimal for examined microorganisms-producers in a nutrient medium with reduced composition; calculation of evolved colonies with specific morphological features; morphologic identification of microorganisms and colonies; calculation of microorganisms' quantity on dishes with recalculation per 1 m3 of air. Bas-ing on the detected regular concentration dependences of microbe contamination dynamics in air we worked out a proce-dure for quantitative determination of microorganisms-producers; we also performed metrological estimate of opera-tional properties for assessing microorganisms-producers of a multi-component microbe specimen as a risk factor caus-ing hazardous impacts on health of workers employed at biotechnological production. We validated our

Air lasing

CERN Document Server

Cheng, Ya

2018-01-01

This book presents the first comprehensive, interdisciplinary review of the rapidly developing field of air lasing. In most applications of lasers, such as cutting and engraving, the laser source is brought to the point of service where the laser beam is needed to perform its function. However, in some important applications such as remote atmospheric sensing, placing the laser at a convenient location is not an option. Current sensing schemes rely on the detection of weak backscattering of ground-based, forward-propagating optical probes, and possess limited sensitivity. The concept of air lasing (or atmospheric lasing) relies on the idea that the constituents of the air itself can be used as an active laser medium, creating a backward-propagating, impulsive, laser-like radiation emanating from a remote location in the atmosphere. This book provides important insights into the current state of development of air lasing and its applications.

Ventilating Air-Conditioner

Science.gov (United States)

Dinh, Khanh

1994-01-01

Air-conditioner provides ventilation designed to be used alone or incorporated into cooling or heating system operates efficiently only by recirculating stale air within building. Energy needed to operate overall ventilating cooling or heating system slightly greater than operating nonventilating cooling or heating system. Helps to preserve energy efficiency while satisfying need for increased forced ventilation to prevent accumulation of undesired gases like radon and formaldehyde. Provides fresh treated air to variety of confined spaces: hospital surgeries, laboratories, clean rooms, and printing shops and other places where solvents used. In mobile homes and portable classrooms, eliminates irritant chemicals exuded by carpets, panels, and other materials, ensuring healthy indoor environment for occupants.

Effects of exposure to noise and indoor air pollution on human perception and symptoms

DEFF Research Database (Denmark)

Witterseh, Thomas; Wargocki, Pawel; Fang, Lei

1999-01-01

The objective of the present study was to investigate human perception and SBS symptoms when people are exposed simultaneously to different levels of air pollution and ventilation noise. The air quality in an office was modified by placing or removing a carpet and the background noise level...... of the occupants were recorded throughout the exposure period. During occupation, the subjects performed simulated office work. The results show that elevated air pollution and noise in an office can interact and negatively affect office workers by increasing the prevalence of SBS symptoms. A moderate increase...... was modified by playing a recording of ventilation noise. Thirty female subjects, six at a time, occupied the office for 4.4 hours. The subjects assessed the air quality, the noise, and the indoor environment upon entering the office and on six occasions during occupation. Furthermore, SBS symptoms...

Psychological mechanisms in outdoor place and weather assessment: towards a conceptual model

Science.gov (United States)

Knez, Igor; Thorsson, Sofia; Eliasson, Ingegärd; Lindberg, Fredrik

2009-01-01

The general aim has been to illuminate the psychological mechanisms involved in outdoor place and weather assessment. This reasoning was conceptualized in a model, tentatively proposing direct and indirect links of influence in an outdoor place-human relationship. The model was subsequently tested by an empirical study, performed in a Nordic city, on the impact of weather and personal factors on participants’ perceptual and emotional estimations of outdoor urban places. In line with our predictions, we report significant influences of weather parameters (air temperature, wind, and cloudlessness) and personal factors (environmental attitude and age) on participants’ perceptual and emotional estimations of outdoor urban places. All this is a modest, yet significant, step towards an understanding of the psychology of outdoor place and weather assessment.

Bibliography of work on the photocatalytic removal of hazardous compounds from water and air

Energy Technology Data Exchange (ETDEWEB)

Blake, D.M.

1994-05-01

This is a bibliography of information in the open literature on work that has been done to date on the photocatalytic oxidation of compounds, principally organic compounds. The goal of the listing is removing hazardous oompounds from water or air. It contains lists of substances and literature citations. The bibliography includes information obtained through the middle of 1993 and some selected references for the balance of that year.

Investigation on the reactions influencing biomass air and air/steam gasification for hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, J.F.; Roman, S.; Bragado, D. [Departamento de Fisica Aplicada, University of Extremadura, 06071 (Spain); Calderon, M. [Departamento de Electronica e Ingenieria Electromecanica, University of Extremadura, 06071 (Spain)

2008-08-15

Hydrogen could be the energy carrier of the next world scene provided that its production, transportation and storage are solved. In this work the production of an hydrogen-rich gas by air/steam and air gasification of olive oil waste was investigated. The study was carried out in a laboratory reactor at atmospheric pressure over a temperature range of 700 - 900 C using a steam/biomass ratio of 1.2 w/w. The influence of the catalysts ZnCl{sub 2} and dolomite was also studied at 800 and 900 C. The solid, energy and carbon yield (%), gas molar composition and high heating value of the gas (kJ NL{sup -} {sup 1}), were determined for all cases and the differences between the gasification process with and without steam were established. Also, this work studies the different equilibria taking place, their predominance in each process and how the variables considered affect the final gas hydrogen concentration. The results obtained suggest that the operating conditions were optimized at 900 C in steam gasification (a hydrogen molar fraction of 0.70 was obtained at a residence time of 7 min). The use of both catalysts resulted positive at 800 C, especially in the case of ZnCl{sub 2} (attaining a H{sub 2} molar fraction of 0.69 at a residence time of 5 min). (author)

Places available**

CERN Document Server

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 :9 & 10.1.2004 (2 days) The JAVA Programming Language Level 2 : 11 to 13.1.2004 (3 days) Hands-on Introduction to Python Programming : 16 - 18.2.2004 (3 days - free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004...

Concrete works for Hamaoka No. 1 nuclear power plant

International Nuclear Information System (INIS)

Horiuchi, Minoru; Sugihara, Kazuo; Iwasawa, Jiro.

1975-01-01

Various aspects of concrete works performed for the reactor building of Hamaoka No.1 plant are reviewed. Control building and waste disposal building were all together combined with the reactor building in order to improve safety against earthquakes. Special consideration was given for the quality control of concrete works by establishing quality control committee, making quality control manual and by performing daily examination and monthly report. The quality and various materials of concrete used are described. The composition of concrete used for various parts of the building is also listed. Detailed description is made regarding the concrete placing for foundation mat, under a containment vessel, and the construction of air gaps and the placing of shielding concrete around the containment vessel. Curves representing the temperature history of concrete at various points are presented. As for testing, the items of test, methods of measurement, and the results of these test and measurement are presented in detail. (Aoki, K.)

Place leadership, governance and power

Directory of Open Access Journals (Sweden)

Sotarauta Markku

2016-12-01

Full Text Available There is an emerging consensus that place leadership is the missing piece in the local and regional development puzzle. In this context, leadership is a hidden form of agency, shadowed by such visible forms of influence as structures and formal institutions, as well as development programs and plans. This article argues that one of the most central issues in a study of place leadership is to analyse the relationships between governance, power and place leadership. The governance arrangements are undoubtedly important, as they dictate the kind of resources and positions provided to regional development work, and thus they also enable, as well as constrain, the many efforts of regional champions to exercise power in complex development processes. It is argued here that revealing how place leadership is enacted in different places and times would allow us to flesh out novel aspects about the eternal questions of how and why some places are able to adapt strategically to ever-changing social, economic and environmental circumstances while others fail to do so. Additionally, deeper investigations of place leadership would hopefully allow us to provide policymakers and practitioners with added insight on the ways to make regional development policies and practices not only more strategic but also effective. This paper elaborates the conceptual link between place leadership, governance and power.

Studies on radon concentration at the work places of Mysuru, Bengaluru, Tumkuru and Kolar Districts of Karnataka State, South India

International Nuclear Information System (INIS)

Ningappa, C.; Reddy, K. Umesha; Rangaswamy, D.R.; Sannappa, J.

2015-01-01

Radon is a radioactive noble gas and is the decay product of naturally occurring uranium. It decays into radioactive metal ions polonium-218 and polonium-214 by alpha radiation, which are harmful to the human health. The concentrations of radon and its progeny inside a given working place depends on activity of radium both in the soil surrounding the workplace and in the building materials, atmospheric conditions, design of the workplace, porosity of the surrounding soil, building layout, and the ventilation habits of the inhabitants of the building. The estimation of dose due to radon and its progeny to the general public and workers at work places are very important. Thus, concentration of radon and its progeny and dose due to radon and its progeny to the public and workers were measured at sixty workplaces of Mysuru, Bengaluru, Tumkur and Kolar districts based on geology and willingness of the workplace owner using twin cup dosimeter based on Solid State Nuclear Track Detectors (SSNTDs) and results are discussed in the present study. The values measured indoor radon in the area of study ranged from a 11.6 to 284.8 Bq.m -3 . (author)

32 CFR 884.3 - Placing member under restraint pending delivery.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Placing member under restraint pending delivery. 884.3 Section 884.3 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE... member under restraint pending delivery. Continue restraint only as long as is reasonably necessary to...

Indoor Air Quality

Science.gov (United States)

... protect yourself and your family. Learn more Air Quality at Work Workers should breathe easy while on the job, but worksites with poor air quality put employees at risk. Healthy air is essential ...

Impact of work place stresses on work ability index in patients with depressive disorders

OpenAIRE

Selmanović Senada; Pranjić Nurka; Brekalo-Lazarević Sanja; Grbović Mensur

2011-01-01

Introduction. Depression seriously affects one’s ability to perform work tasks and function at work. We studied the impact of both the individual and work factors on work ability index in patients suffering from depression. Material and methods. The prospective study, which was conducted by using questionnaires, included 210 patients with depression, who had been on sick leave from 60 to 360 days. The individual factors were evaluated by the standardized abridged form of Occupational St...

In-place testing summary (1992). Progress report

International Nuclear Information System (INIS)

Martinez, V.A.; Barney, D.; Helland, G.; Kain, C.

1994-09-01

This report is the latest in a series of annual reports regarding the ongoing in-place testing program for high-efficiency filtration and chemical adsorber systems at the Los Alamos National Laboratory. This testing is conducted to maintain regulatory permits and to verify that the performance levels, installation, and function of these filtration systems have not deteriorated since the last operating cycle. Furthermore, the performance data obtained from the testing of high efficiency particulate air-filtered vacuums and negative pressure machines aid in the implementation and continuing activities of the asbestos management program at Los Alamos national Laboratory. In addition, this report provides an overview of the testing procedures used to conduct the in-place tests, a summary of the individual system performance, and any trend that has been observed since the last operating cycle

D6.1: First virtual Market Place report

OpenAIRE

WaterInnEU

2016-01-01

52ºNorth WaterInnEU This report describes the current state of the prototype of the virtual Market Place in month 13 of the project. The prototype serves as a proof of concept for the Market Place concepts and services defined in the other work packages aimed to provide a place for solution offerers and managers requests can meet.

Evaluation of air pollution due to natural radioactive elements

International Nuclear Information System (INIS)

Perez, B. A.; Lopez, M. E.

2014-08-01

The presence of radioactive materials in the crustal and as consequence present in the surface, originate the natural radioactive contamination in the different solid, liquid and gaseous materials; particularly in the air that we breathe. Among these radioactive materials that contribute to the environmental pollution are the presences of uranium, radio, thorium and their respective disintegration chains, as the gas radon (Rn-222) that spreads in the air; whose presence increases in areas where the seismic activity is notorious or other natural events take place, case of the Lima (Peru) City. In this work we show the measurements realized during two consecutive years in the roof of a building of three floors in the Lima City, with the purpose of establishing the fluctuations of this gassy pollutant in the surrounding air. The measurements were made using nitrocellulose detectors (Lr-115 type 2) applying the nuclear prints technique. The obtained results allowing to have an indicator of the Rn-222 presence in the air during different seasons of the year and also the presence of other possible radioactive pollutants. The use of this technique allows obtaining and studying the prints that generate the alpha particles that are emitted during the Rn-222 disintegration or by means of their descendants or predecessors; also allowing to discriminate between the short-range tracers or lineal type prints and other very different prints obtained during some of the measurements. The results analyzed according to proposed models are presented in this work. (author)

The Space Place: Multifarious Merchandise for Omnifarious Folks

Science.gov (United States)

Leon, N. J.; Fisher, D. K.

2002-12-01

"The Space Place" is a coordinated NASA educational outreach program that seeks to reach a diverse and under-served audience, including minorities, girls, inner city children, and those living in rural areas. This audience also includes the more than 27 million Americans who, according to the 2000 census, speak Spanish as their first language. The Space Place began in 1998 with a child-oriented Web site (http://spaceplace.nasa.gov) presenting simple "make and do" activities and fun facts related to the technology validation space missions of NASA's New Millennium Program. The Web site is now sponsored by over 30 space science and Earth observing missions. And it is now also available in Spanish. Having materials available on the internet, however, does not guarantee that everyone in the target audience will have access to them. So, The Space Place went on to create a suite of products and a network of partnerships that would allow more direct and diverse ways to communicate. Thus was invented Club Space Place. Club Space Place works through two different types of partnerships: national and local. The products provided: quarterly guides for original Club Space Place group activities, plus NASA space and Earth science and technology bulletin board display materials. The first of the national organizations participating in Club Space Place was Boys and Girls Clubs of America. With 3100 chapters and 3.3 million members ages 6-18, 67% of whom are minorities, BGCA has been able to distribute the quarterly Space Place activity guides electronically via its Web sites to all chapters that have internet access and by hardcopy to those that don't. Other national organizations that receive the activity guides include YWCA, 21st Century Learning Centers, and Civil Air Patrol. Local community partners include about 240 museums, libraries, planetariums, zoos, and aquariums, largely in small cities, towns, and rural areas, with a combined annual visitorship of 26 million. These

Place attachment and natural environmental risk

DEFF Research Database (Denmark)

Bonaiuto, Marino; Alves, Susana; De Dominicis, Stefano

2016-01-01

Little is known about place attachment affecting natural environmental risk perception and coping. A systematic search of social science databases revealed 31 works (1996–2016) directly addressing place attachment in relation to different types of natural hazard risks (e.g., seismic, volcanic, etc.......). Across different contexts, the research shows: (a) positive and/or negative relationships between place attachment and natural environmental risk perception; (b) positive and/or negative relationships between place attachment and risk coping; and (c) mediating and moderating relationships. In particular......, results show that: (a) highly attached individuals perceive natural environmental risks but underestimate their potential effects; (b) highly attached individuals are unwilling to relocate when facing natural environmental risks and more likely to return to risky areas after a natural environmental...

Selection of Air Terminal Device

DEFF Research Database (Denmark)

Nielsen, Peter V.

This paper discusses the selection of the air terminal device for the experiments and numerical prediction in the International Energy Agency Annex 20 work: Air Flow Pattern within Buildings,......This paper discusses the selection of the air terminal device for the experiments and numerical prediction in the International Energy Agency Annex 20 work: Air Flow Pattern within Buildings,...

[Gohieria fusca found in dust of air-conditioner filters].

Science.gov (United States)

Qiang, Chai; Xiao-Dong, Zhan; Wei, Guo; Chao-Pin, Li

2017-09-25

To investigate the pollution status of Gohieria fusca in the air conditioner-filters of different places in Wuhu City. The dust samples were collected from the filters of air-conditioners in dining rooms, shopping malls, hotels and households between June and September, 2013, and G. fusca was detected in the dust samples. There were 430 dust samples collected and 98 were G. fusca positive with the breeding rate of 22.79%. The difference of breeding rates of G. fusca were statistically significant among the different places ( χ 2 =18.294, P air-conditioner filters in Wuhu City gravely.

Strength of smoke-free air laws and indoor air quality.

Science.gov (United States)

Lee, Kiyoung; Hahn, Ellen J; Robertson, Heather E; Lee, Seongjik; Vogel, Suzann L; Travers, Mark J

2009-04-01

Smoke-free air laws have been implemented in many Kentucky communities to protect the public from the harmful effects of secondhand smoke exposure. The impact of different strengths of smoke-free air laws on indoor air quality was assessed. Indoor air quality in hospitality venues was assessed in seven communities before and after comprehensive smoke-free air laws and in two communities only after partial smoke-free air laws. One community was measured three times: before any smoke-free air law, after the initial partial law, and after the law was strengthened to cover all workplaces and public places with few exemptions. Real-time measurements of particulate matters with 2.5 mum aerodynamic diameter or smaller (PM(2.5)) were obtained. When comprehensive smoke-free air laws were implemented, indoor PM(2.5) concentrations decreased significantly from 161 to 20 microg/m3. In one community that implemented a comprehensive smoke-free law after initially passing a partial law, indoor PM(2.5) concentrations were 304 microg/m3 before the law, 338 microg/m3 after the partial law, and 9 microg/m3 after the comprehensive law. The study clearly demonstrated that partial smoke-free air laws do not improve indoor air quality. A significant linear trend indicated that PM(2.5) levels in the establishments decreased with fewer numbers of burning cigarettes. Only comprehensive smoke-free air laws are effective in reducing indoor air pollution from secondhand tobacco smoke.

Preferred place of care and place of death of the general public and cancer patients in Japan.

Science.gov (United States)

Yamagishi, Akemi; Morita, Tatsuya; Miyashita, Mitsunori; Yoshida, Saran; Akizuki, Nobuya; Shirahige, Yutaka; Akiyama, Miki; Eguchi, Kenji

2012-10-01

Dying at a favorite place is one of the important determinants for terminally ill cancer patients. The primary aim was to clarify (1) differences in preferred place of care and place of death among the general public across four areas across Japan and (2) preferred place of care and place of death among community-representative cancer patients. A cross-sectional mail survey was conducted on 8,000 randomly selected general population. We examined preferred place of care and place of death using two vignettes and obtained a total of 3,984 (50%) responses. For the pain scenario, approximately 50% of the general public throughout four areas chose home as their preferred place of care; and for the dependent-without-pain scenario, about 40% chose home as preferred place of care. In cancer patients, for both scenarios, approximately 40% chose home as the preferred place of care, and they were significantly less likely to choose home. The most preferred combination of place of care and place of death was home hospice for both groups. Although there were statistically significant differences in preferred place of care and place of death among the four regions, the absolute difference was less than 8%. Independent determinants of choosing home as place of care included concern about family burden and being unable to adequately respond to sudden changes out of working hours. In conclusion, establishing more accessible home and hospice service is strongly required through arranging regional resources to reduce family burden, alleviating patient-perceived burdens, and improving 24-h support at home.

Continuous air monitor correlation to fixed air sample data at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Whicker, J.J.

1993-01-01

Continuous air monitoring instruments (CAMS) deployed in laboratories in the TA-55 plutonium facility at Los Alamos National Laboratory (LANL) alarmed less than 33 percent of the time when fixed air sample measurements in the same laboratory showed integrated concentrations exceeding 500 DAC-hrs. The purpose of this study was to explore effects of non-instrument variables on alarm sensitivities for properly working CAMS. Non-instrument variables include air flow patterns, particle size of released material, and the energy of the release. Dilution Factors (DFs) for 21 airborne releases in various rooms and of different magnitudes were calculated and compared. The median DF for releases where the CAM alarmed was 13.1 while the median DF for releases where the CAM did not alarm was 179. Particle sizes ranged considerably with many particles larger than 10 μm. The cause of the release was found to be important in predicting if a CAM would alarm with releases from bagouts resulting in the greatest percentage of CAM alarms. The results of this study suggest that a two-component strategy for CAM placement at LANL be utilized. The first component would require CAMs at exhaust points in the rooms to provide for reliable detection for random release locations. The second component would require placing CAMs at locations where releases have historically been seen. Finally, improvements in CAM instrumentation is needed

[Microbiological quality of the air in "small gastronomy point"].

Science.gov (United States)

Wójcik-Stopczyńska, Barbara

2006-01-01

The aim of this work was the estimation of microbial contamination of the air in "small gastronomy point". The study included three places, which have been separated on the ground of their function: 1. area of subsidiaries, 2. area of distribution (sale and serving meal), 3. area of consumption. The total numbers of aerobic mesophilic bacteria, yeasts and moulds were determined by sedimentation method. Taxonomy units of fungal aerosol were also estimated. The samples of air were collected in 16 investigation points in the morning (8-8.30) and in the afternoon (14-14.30). Four series of measurements were carried out and in general 128 of air samples were tested. The results showed that numbers of bacteria, yeasts and moulds were variable and received respectively 30-3397, 0-254 and 0-138 cfu x m(-3). Microbial contamination of air changed depending on area character (the highest average count of bacteria occurred in the air of consumption area and fungi in subsidiaries area), time of a day (contamination of the air increased in the afternoon) and determination date. Only in single samples the numbers of bacteria and fungi were higher than recommended level. Pigmentary bacteria had high participation in total count of bacteria and filamentous fungi were represented mostly by Penicillium sp. and Cladosporium sp.

Inventing and naming America:  Place and Place Names in Vladimir Nabokov’s Lolita

Directory of Open Access Journals (Sweden)

Monica Manolescu-Oancea

2009-06-01

Full Text Available In the afterword to Lolita, Nabokov claimed that in this book he had to invent both Lolita and America after having invented Europe in his previous fiction. This paper focuses precisely on the various ways in which Nabokov “invented” America in his best-known novel. This invention is first of all the result of the author’s evolving stance on the complexity of what he called “average ‘reality’” in his works. Through a survey of Nabokov’s statements on the choice and role of place in the forewords to his Russian works and in his critical texts, I show that Lolita is indeed considered by Nabokov to be a “recreation” of American reality, to a much greater extent than his Russian works had been recreations of a given milieu. I take the metaphor of the “crazy quilt” mentioned in Lolita to suggest complexity, chromatic exuberance, hybridity. The invention of America is also the result of a process of naming. Place names will be examined, not only those which make up Quilty’s “cryptogrammic paperchase”, but also Humbert’s choice of place names. The problem of referentiality is discussed and the way recent criticism has dealt with it. Finally, the interplay between one and many is emphasized, the way in which the diversity of the “crazy quilt” is counterbalanced by the uniqueness of the mastermind having produced it. The American motto “From many make one” could be reinterpreted as “From one make many”.

Air Distribution in Rooms

DEFF Research Database (Denmark)

Nielsen, Peter V.

The research on air distribution in rooms is often done as full-size investigations, scale-model investigations or by Computational Fluid Dynamics (CFD). New activities have taken place within all three areas and this paper draws comparisons between the different methods. The outcome of the l......EA sponsored research "Air Flow Pattern within Buildings" is used for comparisons in some parts of the paper because various types of experiments and many countries are involved....

CityAir app: Mapping air-quality perception using people as sensors

Science.gov (United States)

Castell, Nuria; Fredriksen, Mirjam; Cole-Hunter, Thomas; Robinson, Johanna; Keune, Hans; Nieuwenhuijsen, Mark; Bartonova, Alena

2016-04-01

. Currently, 400 + Android OS and 180+ iOS smartphone users in 12+ countries have downloaded, installed and used CityAir. The central advantage of the People as Sensors approach is that it can complement costly physical sensor networks. The observations made in smartphones are shared and other persons can consult those to take decisions as for instance choosing a cleaner route to bicycle to work or avoid exercising in certain areas that day. The drawbacks are limited comparability and interpretability, and the inherent uncertainty. CityAir can be seen as a democratic platform for empowering citizens to contribute to environmental governance, facilitating the communication between the citizen and the decision makers. Citizens are encouraged to participate in sharing their perception on the air quality in their city. Citizens become agents of change by uncovering and sharing their perception of air quality in a place that matters to them. We discuss the current challenges: how to involve citizens in the use of the app and how to communicate and visualize the information in a way that is useful for the citizens; point out possible solutions, and pin-point directions for future research.

Assessment of SRS ambient air monitoring network

Energy Technology Data Exchange (ETDEWEB)

Abbott, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jannik, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-08-03

Three methodologies have been used to assess the effectiveness of the existing ambient air monitoring system in place at the Savannah River Site in Aiken, SC. Effectiveness was measured using two metrics that have been utilized in previous quantification of air-monitoring network performance; frequency of detection (a measurement of how frequently a minimum number of samplers within the network detect an event), and network intensity (a measurement of how consistent each sampler within the network is at detecting events). In addition to determining the effectiveness of the current system, the objective of performing this assessment was to determine what, if any, changes could make the system more effective. Methodologies included 1) the Waite method of determining sampler distribution, 2) the CAP88- PC annual dose model, and 3) a puff/plume transport model used to predict air concentrations at sampler locations. Data collected from air samplers at SRS in 2015 compared with predicted data resulting from the methodologies determined that the frequency of detection for the current system is 79.2% with sampler efficiencies ranging from 5% to 45%, and a mean network intensity of 21.5%. One of the air monitoring stations had an efficiency of less than 10%, and detected releases during just one sampling period of the entire year, adding little to the overall network intensity. By moving or removing this sampler, the mean network intensity increased to about 23%. Further work in increasing the network intensity and simulating accident scenarios to further test the ambient air system at SRS is planned

Work cabinet

International Nuclear Information System (INIS)

Hornby, L.

1981-01-01

A simple work cabinet is described for handling materials such as radiopharmaceuticals. The cabinet includes a perforated working surface to which an operator can gain hand and forearm access through an aperture. Clean air is supplied through a high efficiency particulate air filter and withdrawn through the perforated surface. (U.K.)

Air and smear sample calculational tool for Fluor Hanford Radiological control

International Nuclear Information System (INIS)

BAUMANN, B.L.

2003-01-01

A spreadsheet calculation tool was developed to automate the calculations performed for determining the concentration of airborne radioactivity and smear counting as outlined in HNF--13536, Section 5.2.7, ''Analyzing Air and Smear Samples''. This document reports on the design and testing of the calculation tool. Radiological Control Technicians (RCTs) will save time and reduce hand written and calculation errors by using an electronic form for documenting and calculating work place air samples. Current expectations are RCTs will perform an air sample and collect the filter or perform a smear for surface contamination. RCTs will then survey the filter for gross alpha and beta/gamma radioactivity and with the gross counts utilize either hand calculation method or a calculator to determine activity on the filter. The electronic form will allow the RCT with a few key strokes to document the individual's name, payroll, gross counts, instrument identifiers; produce an error free record. This productivity gain is realized by the enhanced ability to perform mathematical calculations electronically (reducing errors) and at the same time, documenting the air sample

Levee work for No.3 unit in Ikata Nuclear Power Plant

International Nuclear Information System (INIS)

Nakajima, Hiroshi; Matsumoto, Tadashi.

1987-01-01

An underwater concreting technique was decided to be used for preventing subsidence of a rubble mound which may occur after the installation of a caison. It was planned to fill the gaps among the rubble stones with a special type of underwater concrete. This report deals with the tests for concrete placing and actual levee work which was carried out based on the test results. Tests are performed to determine the compressive strength, flow properties and self-levelling properties of the concrete. Water analysis is also conducted. Furthermore, examinations are made on the capability of the mixer to be mounted on the vessel, the capacity of the concrete pump and required batches to be fed. A work plan is developed based on these examinations. The actual underwater concrete placing work was carried out as follows: 1) excavation of the foundation ground by a grab dredger, 2) throwing down of rubble stones around the foundation and compaction of them by a heavy weight, 3) shaping of the face of slope, 4) throwing down of additional stons in the central portion, and 5) placing of special underwater concrete. For quality management, measurements of the slump. slump flow and air volume were made and compressive strength testing was performed during the work. The tubidity is also observed. (Nogami, K.)

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

Team performance in networked supervisory control of unmanned air vehicles: effects of automation, working memory, and communication content.

Science.gov (United States)

McKendrick, Ryan; Shaw, Tyler; de Visser, Ewart; Saqer, Haneen; Kidwell, Brian; Parasuraman, Raja

2014-05-01

Assess team performance within a net-worked supervisory control setting while manipulating automated decision aids and monitoring team communication and working memory ability. Networked systems such as multi-unmanned air vehicle (UAV) supervision have complex properties that make prediction of human-system performance difficult. Automated decision aid can provide valuable information to operators, individual abilities can limit or facilitate team performance, and team communication patterns can alter how effectively individuals work together. We hypothesized that reliable automation, higher working memory capacity, and increased communication rates of task-relevant information would offset performance decrements attributed to high task load. Two-person teams performed a simulated air defense task with two levels of task load and three levels of automated aid reliability. Teams communicated and received decision aid messages via chat window text messages. Task Load x Automation effects were significant across all performance measures. Reliable automation limited the decline in team performance with increasing task load. Average team spatial working memory was a stronger predictor than other measures of team working memory. Frequency of team rapport and enemy location communications positively related to team performance, and word count was negatively related to team performance. Reliable decision aiding mitigated team performance decline during increased task load during multi-UAV supervisory control. Team spatial working memory, communication of spatial information, and team rapport predicted team success. An automated decision aid can improve team performance under high task load. Assessment of spatial working memory and the communication of task-relevant information can help in operator and team selection in supervisory control systems.

Places available**

CERN Multimedia

2003-01-01

If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses : EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) The EDMS-MTF in practice (free of charge) :  28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 - Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to Pspice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programm...

Places available**

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) The JAVA Programming Language Level 2 : 11 to 13.1.2004 (3 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW Basics 1 : 22 - 24.3.20...

Adherence to the Mediterranean diet among employees in South West England: Formative research to inform a web-based, work-place nutrition intervention

Directory of Open Access Journals (Sweden)

Angeliki Papadaki

2015-01-01

Conclusion: Improvement in the consumption of several Mediterranean diet components is needed to increase adherence in this sample of adults. The findings have the potential to inform the development of a web-based intervention that will focus on these foods to promote the Mediterranean diet in work-place settings in South West England.

Effect of central ventilation and air conditioner system on the concentration and health risk from airborne polycyclic aromatic hydrocarbons.

Science.gov (United States)

Lv, Jinze; Zhu, Lizhong

2013-03-01

Central ventilation and air conditioner systems are widely utilized nowadays in public places for air exchange and temperature control, which significantly influences the transfer of pollutants between indoors and outdoors. To study the effect of central ventilation and air conditioner systems on the concentration and health risk from airborne pollutants, a spatial and temporal survey was carried out using polycyclic aromatic hydrocarbons (PAHs) as agent pollutants. During the period when the central ventilation system operated without air conditioning (AC-off period), concentrations of 2-4 ring PAHs in the model supermarket were dominated by outdoor levels, due to the good linearity between indoor air and outdoor air (r(p) > 0.769, p air conditioner systems were working simultaneously (AC-on period), although the total levels of PAHs were increased, the concentrations and percentage of the particulate PAHs indoors declined significantly. The BaP equivalency (BaPeq) concentration indicated that utilization of air conditioning reduced the health risks from PAHs in the model supermarket.

Without Place, Is It Real?

Directory of Open Access Journals (Sweden)

Joseph F Donnermeyer

2016-09-01

Full Text Available This article reviews Matthews’ (2014 Realist Criminology as an opportunity to address larger shortcomings within critical criminology, which is the failure to develop an alternative theory of crime and place to the mainstream theories of social disorganisation and collective efficacy. It uses rural criminological work related to violence against women and substance use, production and trafficking to illustrate the importance of place for development of a realist criminology that can consider localised expressions of power and inequality, and the multiplicity of networks and roles by which people can simultaneously be involved in both conforming and deviant/criminal behaviours. The article also suggests that a critical theory of crime and place would be useful to the synthesis and re-interpretation of criminological literature that is either theory-less or lacks a critical perspective.

CERN Technical Training: Open Places for September 2007 Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2007. You may find the full Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=300 ) or in next weeks paper bulletin. OFFICE SOFTWARE Introduction to Dreamweaver MX (French): 3.9.-4.9.2007 (2 days, places available) CERN EDMS MTF en pratique (French): 4.9.2007 – 9:00-12:30 (1/2 day, places available) Word 2007 (Short Course III) – How to work with long documents (Bilangue): 14.9.2007 – 14:00-17:30 (1/2 day, places available) Word 2007 Niveau 1 (French): 20.9.-21-9.2007 (2 days, places available) ACCESS 2007 – Level 1: ECDL (English): 20.9.-21.9.2007 – 9:00-17:30 (2 days, places available) Excel 2007 (Short Course I) – How to work with formulae (Bilangue): 21.9.2007 – 14:00-17:30 (1/2 day, places available) CERN EDMS Introduction (English): 24.09.2007 (1 day, places available) Outlook 2007 (Short Course II) – Calendar, Task...

Humidification dehumidification desalination system using parabolic trough solar air collector

International Nuclear Information System (INIS)

Al-Sulaiman, Fahad A.; Zubair, M. Ifras; Atif, Maimoon; Gandhidasan, Palanichamy; Al-Dini, Salem A.; Antar, Mohamed A.

2015-01-01

This paper deals with a detailed thermodynamic analysis to assess the performance of an HDH system with an integrated parabolic trough solar collector (PTSC). The HDH system considered is an open air, open water, air heated system that uses a PTSC as an air heater. Two different configurations were considered of the HDH system. In the first configuration, the solar air heater was placed before the humidifier whereas in the second configuration the solar air heater was placed between the humidifier and the dehumidifier. The current study revealed that PTSCs are well suited for air heated HDH systems for high radiation location, such as Dhahran, Saudi Arabia. The comparison between the two HDH configurations demonstrates that the gained output ratio (GOR) of the first configuration is, on average, about 1.5 whereas for the second configuration the GOR increases up to an average value of 4.7. The study demonstrates that the HDH configuration with the air heater placed between the humidifier and the dehumidifier has a better performance and a higher productivity. - Highlights: • Thermodynamic analysis of an HDH system driven by a parabolic trough solar collector was conducted. • The first configuration reveals a GOR of 1.5 while the second configuration reveals a GOR of 4.7. • Effective heating of the HDH system was obtained through parabolic trough solar collector

Community Perceptions of Air Pollution and Related Health Risks in Nairobi Slums

Science.gov (United States)

Egondi, Thaddaeus; Kyobutungi, Catherine; Ng, Nawi; Muindi, Kanyiva; Oti, Samuel; van de Vijver, Steven; Ettarh, Remare; Rocklöv, Joacim

2013-01-01

Air pollution is among the leading global risks for mortality and responsible for increasing risk for chronic diseases. Community perceptions on exposure are critical in determining people’s response and acceptance of related policies. Therefore, understanding people’ perception is critical in informing the design of appropriate intervention measures. The aim of this paper was to establish levels and associations between perceived pollution and health risk perception among slum residents. A cross-sectional study of 5,317 individuals aged 35+ years was conducted in two slums of Nairobi. Association of perceived score and individual characteristics was assessed using linear regression. Spatial variation in the perceived levels was determined through hot spot analysis using ArcGIS. The average perceived air pollution level was higher among residents in Viwandani compared to those in Korogocho. Perceived air pollution level was positively associated with perceived health risks. The majority of respondents were exposed to air pollution in their place of work with 66% exposed to at least two sources of air pollution. Less than 20% of the respondents in both areas mentioned sources related to indoor pollution. The perceived air pollution level and related health risks in the study community were lowamong the residents indicating the need for promoting awareness on air pollution sources and related health risks. PMID:24157509

ARQUEOLOGÍA EN UNA PLAZA METROPOLITANA: RECOLETA, BUENOS AIRES (Archaeology in a metropolitan place: Recoleta, Buenos Aires

Directory of Open Access Journals (Sweden)

Mónica Carminati

2009-09-01

Full Text Available Una de las plazas más elegantes de Buenos Aires, ubicada en el barrio de mayores ingresos económicos y símbolo de un sector social elevado, demostró al ser excavada e historiada un origen totalmente diferente: zona marginal de pobres casas de barro y madera, una vivienda con tierras de cultivo en las afueras de la ciudad que fue pasando de mano en mano entre familias inglesas, hasta que el crecimiento de la ciudad tras la epidemia de la fiebre amarilla lleva a la concentración de la riqueza en ese lugar. Un hallazgo casual, un pozo que se hundió por casualidad, abrió la puerta para redescubrir el origen de la zona. ENGLISH: We dug one of the most fancy parks of Buenos Aires, in the middle of the most healthy area of the city. The opportunity came when the inner wall of a pit covered by asphalt was demolished by an old tree. And the kind of history we found was of poverty, rural population and settlement of marginalized people. The review of its history and material culture opened our minds to a completely different kind of neighborhood that what it is now.

Air quality management: challenges and solutions in delivering air quality action plans

Energy Technology Data Exchange (ETDEWEB)

Beattie, C.I.; Longhurst, J.W.S.; Woodfield, N.K.

2000-07-01

The Air Quality Strategy for England, Scotland, Wales and Northern Ireland (DETR, 2001) has the aim of showing how improved local air quality in the UK may be delivered. Through a process of reviewing and assessing local air quality in both urban and rural localities, a clear picture is emerging of areas of the UK where air quality objectives are not likely to be met. The next challenge will be the identification of the required actions and new ways of working to achieve specific air quality objectives. The declaration of air quality management areas, where objectives are not predicted to be met by their target years, involves co-ordinated local action and collaborative working, which can only be effective with support across local authority departments and external stake holders. This paper provides a background to the relevant legislation underpinning, local air quality management and summarises the review and assessment process. It then comments on future directions in relation to the designation of Air Quality Management Areas and considers the requirements of action plans to deliver the goal of cleaner air in the UK. It is concluded that the UK has developed a highly sophisticated system of air quality management over a relatively short period of time, and with it has brought a new way of local authority working. The challenge of the next stage of the process is likely to be in implementing cost effective and proportional solutions to identified problems at the local level. (Author)

Effect of air flow on tubular solar still efficiency.

Science.gov (United States)

Thirugnanasambantham, Arunkumar; Rajan, Jayaprakash; Ahsan, Amimul; Kandasamy, Vinothkumar

2013-01-01

An experimental work was reported to estimate the increase in distillate yield for a compound parabolic concentrator-concentric tubular solar still (CPC-CTSS). The CPC dramatically increases the heating of the saline water. A novel idea was proposed to study the characteristic features of CPC for desalination to produce a large quantity of distillate yield. A rectangular basin of dimension 2 m × 0.025 m × 0.02 m was fabricated of copper and was placed at the focus of the CPC. This basin is covered by two cylindrical glass tubes of length 2 m with two different diameters of 0.02 m and 0.03 m. The experimental study was operated with two modes: without and with air flow between inner and outer tubes. The rate of air flow was fixed throughout the experiment at 4.5 m/s. On the basis of performance results, the water collection rate was 1445 ml/day without air flow and 2020 ml/day with air flow and the efficiencies were 16.2% and 18.9%, respectively. THE EXPERIMENTAL STUDY WAS OPERATED WITH TWO MODES: without and with air flow between inner and outer tubes. The rate of air flow was fixed throughout the experiment at 4.5 m/s. On the basis of performance results, the water collection rate was 1445 ml/day without air flow and 2020 ml/day with air flow and the efficiencies were 16.2% and 18.9%, respectively.

Multiple-stage decisions in a marine central-place forager.

Science.gov (United States)

Friedlaender, Ari S; Johnston, David W; Tyson, Reny B; Kaltenberg, Amanda; Goldbogen, Jeremy A; Stimpert, Alison K; Curtice, Corrie; Hazen, Elliott L; Halpin, Patrick N; Read, Andrew J; Nowacek, Douglas P

2016-05-01

Air-breathing marine animals face a complex set of physical challenges associated with diving that affect the decisions of how to optimize feeding. Baleen whales (Mysticeti) have evolved bulk-filter feeding mechanisms to efficiently feed on dense prey patches. Baleen whales are central place foragers where oxygen at the surface represents the central place and depth acts as the distance to prey. Although hypothesized that baleen whales will target the densest prey patches anywhere in the water column, how depth and density interact to influence foraging behaviour is poorly understood. We used multi-sensor archival tags and active acoustics to quantify Antarctic humpback whale foraging behaviour relative to prey. Our analyses reveal multi-stage foraging decisions driven by both krill depth and density. During daylight hours when whales did not feed, krill were found in deep high-density patches. As krill migrated vertically into larger and less dense patches near the surface, whales began to forage. During foraging bouts, we found that feeding rates (number of feeding lunges per hour) were greatest when prey was shallowest, and feeding rates decreased with increasing dive depth. This strategy is consistent with previous models of how air-breathing diving animals optimize foraging efficiency. Thus, humpback whales forage mainly when prey is more broadly distributed and shallower, presumably to minimize diving and searching costs and to increase feeding rates overall and thus foraging efficiency. Using direct measurements of feeding behaviour from animal-borne tags and prey availability from echosounders, our study demonstrates a multi-stage foraging process in a central place forager that we suggest acts to optimize overall efficiency by maximizing net energy gain over time. These data reveal a previously unrecognized level of complexity in predator-prey interactions and underscores the need to simultaneously measure prey distribution in marine central place forager

Multiple-stage decisions in a marine central-place forager

Science.gov (United States)

Friedlaender, Ari S.; Johnston, David W.; Tyson, Reny B.; Kaltenberg, Amanda; Goldbogen, Jeremy A.; Stimpert, Alison K.; Curtice, Corrie; Hazen, Elliott L.; Halpin, Patrick N.; Read, Andrew J.; Nowacek, Douglas P.

2016-05-01

Air-breathing marine animals face a complex set of physical challenges associated with diving that affect the decisions of how to optimize feeding. Baleen whales (Mysticeti) have evolved bulk-filter feeding mechanisms to efficiently feed on dense prey patches. Baleen whales are central place foragers where oxygen at the surface represents the central place and depth acts as the distance to prey. Although hypothesized that baleen whales will target the densest prey patches anywhere in the water column, how depth and density interact to influence foraging behaviour is poorly understood. We used multi-sensor archival tags and active acoustics to quantify Antarctic humpback whale foraging behaviour relative to prey. Our analyses reveal multi-stage foraging decisions driven by both krill depth and density. During daylight hours when whales did not feed, krill were found in deep high-density patches. As krill migrated vertically into larger and less dense patches near the surface, whales began to forage. During foraging bouts, we found that feeding rates (number of feeding lunges per hour) were greatest when prey was shallowest, and feeding rates decreased with increasing dive depth. This strategy is consistent with previous models of how air-breathing diving animals optimize foraging efficiency. Thus, humpback whales forage mainly when prey is more broadly distributed and shallower, presumably to minimize diving and searching costs and to increase feeding rates overall and thus foraging efficiency. Using direct measurements of feeding behaviour from animal-borne tags and prey availability from echosounders, our study demonstrates a multi-stage foraging process in a central place forager that we suggest acts to optimize overall efficiency by maximizing net energy gain over time. These data reveal a previously unrecognized level of complexity in predator-prey interactions and underscores the need to simultaneously measure prey distribution in marine central place forager

Understanding concepts of place in recreation research and management.

Science.gov (United States)

Linda. E. Kruger; Troy E. Hall; Maria C. Stiefel

2008-01-01

Over a 3-day weekend in the spring of 2004 a group of scientists interested in extending understanding of place as applied in recreation research and management convened a working session in Portland, Oregon. The purpose of the gathering was to clarify their understanding of place-related concepts, approaches to the study of people-place relations, and the application...

Wood pellets and work environment; Traepiller og arbejdsmiljoe

Energy Technology Data Exchange (ETDEWEB)

Skov, S.

2012-07-01

The project aim was to evaluate the working environment in the production, transport and use of wood pellets. Furthermore, obtained knowledge and guidelines should be disseminated to relevant audiences. The first aim was achieved by making dust measurements at various relevant locations and analyze the results. Several technical problems regarding the measurements occurred during the project. In general, the manual handling of pellets often is a short-term task, which limits the amount of dust that can be collected on the sampling filter. The solution to this problem could be the use of in situ monitoring equipment, however, this technic did not work well for wood dust. Dissemination is mainly done by publishing the findings and guidelines on the webpage www.fyrmedpiller.dk. The result shows that there are widespread dust problems associated with the use and handling of pellets. The result may have been expected in the wood pellet industry, which has been reluctant to support this project. Legislation on the working environment has set a threshold limit for the dust concentration in the air on max 1 mg of dust per cubic meters of air over a working day and in over shorter periods this limit may be doubled. These threshold values were exceeded in many cases. Brief overview: The production of pellets takes place in a very dusty working environment, but the specific pelletizing and bagging processes only produce limited amounts of dust. The dust problems are major in the large warehouses where the handling of the raw material for the pellets increases the dust concentration in the air to levels that by far exceeds the legal threshold values. The work is mainly carried out from the cabin of different machines e.g. loaders and bobcats. It turns out that the average dust concentration in these cabins with filters also exceeds the threshold values. The transports of wood pellets include loading, unloading and delivery of loose pellets, all situations that are critical

PACS or the future of the radiologist's working place

International Nuclear Information System (INIS)

Meyer-Ebrecht, D.

1988-01-01

PACS (picture archiving and communication systems) is a synonym for the replacement of the traditional photographic film by means of technologies that will communicate and store images exclusively in digital form. Digital mass storage will replace the film archives and will be linked to all image sources by means of a data communication network. More significantly, PACS will also introduce a novel type of image-evaluation modality, the diagnostic image work station. Images will be displayed on TV monitors. In addition, a variety of support functions will become available for image handling and processing. The replacement of the light box by a digital work station will definitely cause dramatic changes in the radiologist's work. (orig.) [de

[Municipalities as places for social work for the elderly].

Science.gov (United States)

Rüßler, Harald; Heite, Elisabeth

2017-07-01

Against the background of social and demographic changes, this article addresses the design and organization of processes of aging within municipal contexts. It is assumed that the renaissance of the local communal situation corresponds to processes of individualization and subjectivation, which are characteristic for (post)industrial western societies, and that this development is one of the reasons that community-based social work is regaining importance. A case study of social work for the elderly in a municipality of the Ruhr area, which is imbedded in a municipal senior citizens policy concept, illustrates this assumption. The conclusion identifies the scope of actions for social work for the elderly as well as their limitations.

Work plan for upgrading the 241-A-701 compressed air system and motor control center. Revision 1

International Nuclear Information System (INIS)

Carpenter, K.E.

1995-01-01

This work plan will outline the responsibilities associated with the 241-A-701 Compressed Air System (CAS) and Motor Control Center (MCC) upgrades. All activities required to design, install, test, and operate the modified systems are addressed in this document. Upgrades Technical Support (UTS) of TWRS Engineering is responsible for the completion of all tasks associated with this upgrade. UTS will coordinate the upgrade activities, and ensure all tasks are successfully completed on or before the scheduled dates. The primary objective of the 241-A-701 Compressor and MCC Upgrade is to provide a reliable source of process and instrument compressed air to the A, AX, AY, and AZ tank farms

The Matter and Imagery of Air in Eduardo Chillida’s The Comb of the Wind XV

Directory of Open Access Journals (Sweden)

Mei-Hsin Chen

2017-08-01

Full Text Available Eduardo Chillida’s The Comb of the Wind XV, embedded in natural rocks rising from the Cantabrian Ocean in 1977, expresses the artistic potential of air as a material, a metaphor, and as an art-maker. With this sculpture, Chillida opened up the possibility for air itself to show indefinite imageries. Although much has been written about this sculptural group from different perspectives, no study has been systematically undertaken to analyze it regarding the theme of the matter of air, which should be considered the core of the work of art. As Gaston Bachelard stated: ‘Chillida wished the iron [of The Comb of the Wind XV] to show aerial realities.’ Hence, this article seeks to study to what ‘aerial realities’ Chillida might refer, and the relationship between air and his artwork. First, this paper delves into the meanings and functions that air involves in Chillida’s artwork, as well as into how the sculptor embodied his poetic of air and allowed the spectator to perceive his sculptural installation with five senses. Also, the interaction between Chillida’s work and Luis Peña Ganchegui’s architectural installation La Plaza del Tenis is examined under the scope of Martin Heidegger’s notion of place. All these aspects are discussed to help readers realize why the air in natural motion is the foundation of The Comb of the Wind XV, and map the holistic imagery of air that Chillida intended to express.

The foregrounding of place in Trainspotting

DEFF Research Database (Denmark)

Herrmann, Cassandra; Jensen, Marie Møller; Thiesson, Tine Myrup

2017-01-01

(2003), Johnstone (2009, 2010, 2013), and Eckert’s (2008) work on indexicality, we argue that these linguistic features in Trainspotting function as indexical markers connecting the characters and the novel to place, more specifically to Scotland. In the analysis, we explore three channels through which...... the foregrounding of place is evident. First, the foregrounding of place happens through the sheer volume of nonstandard English associated with Scots throughout the novel in that the extensive appearance of nonstandard English deviates from most novels, and in that the nonstandard variety indexes Scotland. Second...... of place happens through the ideology that favours Standard English over nonstandard English. This channel of foregrounding appears through the characters’ ability or inability to style-shift between nonstandard English and Standard English, and the effects of the ability or inability to do so. We argue...

[Photometric determination of butyl "aeroflot" flotation agent (sodium dibutyl dithiophosphate) in the air of work zone and skin washings].

Science.gov (United States)

Dorogova, V B; Kucheriavykh, E I; Sokolova, T V

1989-01-01

Photometric procedure of butyl "aeroflot" identification in the work zone air and in wash-out from workers' integument was developed, The procedure was based on the formation of yellow- and orange-dyed copper dibutyl dithiophosphate under butyl "aeroflot" interaction with copper sulphate with the subsequent photometry of dyed solutions for the wavelength of 420 nm in the 10-mm cell. Buffer solution with pH-9.2 was used as an absorbing solution for the workplace air sampling and integument wash-out.

Air ionizatio at X-ray departments

International Nuclear Information System (INIS)

Vesela, O.; Mosatova, A.; Kubova, Z.

1987-01-01

Changes in electroionic microclimate are dealt with at X-ray workplaces and their dynamics in the course of the day during normal operation. Following exposure to X-ray radiation the specific concentration of light air ions of both polarities increases due to increased input of ionization energy. Within the first minutes following the termination of exposure a sharp decline takes place in the specific concentration of light air ions with subsequent well of positive ions in the air. (author). 1 tab., 19 refs

New arrangement for the air cleanup system to recover tritium

International Nuclear Information System (INIS)

Nishikawa, Masabumi; Takahashi, Kohsaku; Munakata, Kenzo; Fukada, Satoshi; Kotoh, Kenji; Takeishi, Toshiharu

1997-01-01

At present, the standard arrangement of the air cleanup system responsible for emergency tritium recovery from room air is a catalytic oxidation bed with a heater followed by an adsorption bed with a cooler. One disadvantage of this arrangement is that trouble with the heater or the cooler could result in a loss of capacity to recover tritium. Another disadvantage of the catalyst-adsorption-bed arrangement is that tritiated water must be recovered with a high decontamination factor after dilution with a large amount of water vapor in the working atmosphere. The performance of a new arrangement for the air cleanup system, which consists of a precious metal catalyst bed preceded by an adsorption bed without heating equipment, is discussed. According to calculations, most of the tritium released to the room air is recovered in the catalyst bed through oxidation, adsorption, and isotope exchange reaction when the new arrangement is applied. The adsorption bed placed before the catalyst bed dehumidifies the process gas to such a degree that the oxidation reaction of tritium in the catalyst bed is not hindered by water vapor. 15 refs., 6 figs., 6 tabs

Setting priorities for ambient air quality objectives

International Nuclear Information System (INIS)

2004-10-01

Alberta has ambient air quality objectives in place for several pollutants, toxic substances and other air quality parameters. A process is in place to determine if additional air quality objectives are required or if existing objectives should be changed. In order to identify the highest priority substances that may require an ambient air quality objective to protect ecosystems and public health, a rigorous, transparent and cost effective priority setting methodology is required. This study reviewed, analyzed and assessed successful priority setting techniques used by other jurisdictions. It proposed an approach for setting ambient air quality objective priorities that integrates the concerns of stakeholders with Alberta Environment requirements. A literature and expert review were used to examine existing priority-setting techniques used by other jurisdictions. An analysis process was developed to identify the strengths and weaknesses of various techniques and their ability to take into account the complete pathway between chemical emissions and damage to human health or the environment. The key strengths and weaknesses of each technique were identified. Based on the analysis, the most promising technique was the tool for the reduction and assessment of chemical and other environmental impacts (TRACI). Several considerations for using TRACI to help set priorities for ambient air quality objectives were also presented. 26 refs, 8 tabs., 4 appendices

Pressure ulcer incidence and progression in critically ill subjects: influence of low air loss mattress versus a powered air pressure redistribution mattress.

Science.gov (United States)

Black, Joyce; Berke, Christine; Urzendowski, Gail

2012-01-01

The primary objective of this study was to compare facility-acquired pressure ulcer incidence and progression of pressure ulcers present on admission in critically ill patients, using 2 different support surfaces. We completed a comparison cohort study in a surgical intensive care unit (ICU). The study setting was a 12-bed cardiovascular ICU in a university-based hospital in the Midwestern United States. The sample comprised 52 critically ill patients; 31 were placed on low air loss weight-based pressure redistribution-microclimate management system beds and 21 were placed on integrated powered air pressure redistribution beds. Prior to the start of the study, 5 low airloss beds were placed in open rooms in the cardiovascular surgical ICU. Inclusion criteria were anticipated ICU stay of 3 days, and patients did not receive a speciality bed for pulmonary or wound issues. Initial assessment of the patients included risk assessment and prior events that would increase risk for pressure ulcer development such as extended time in operating room, along with skin assessment for existing pressure ulcers. Subjects in both groups had ongoing skin assessment every 3 to 4 days and a subjective evaluation of heel elevation and turning or repositioning by the researcher. Data were collected until the subjects were dismissed from the ICU. Patients admitted to the unit were assigned to open rooms following the usual protocols. The mean length of stay was 7.0 days, with an 8.1-day length of stay for subjects on "low air loss with microclimate management" beds (LAL-MCM) and 6.6 days on the integrated power pressure air redistribution (IP-AR) beds (P = NS). The incidence of pressure ulcers on the buttocks, sacrum, or coccyx was 0% (0/31) on the low air loss bed and 18% (4/21) on the IP-AR bed (P = .046). Five subjects had 6 pressure ulcers on admission. Two pressure ulcers on 2 patients worsened on the integrated power air redistribution beds, which required specialty bed rental

A proper choice of route significantly reduces air pollution exposure--a study on bicycle and bus trips in urban streets.

Science.gov (United States)

Hertel, Ole; Hvidberg, Martin; Ketzel, Matthias; Storm, Lars; Stausgaard, Lizzi

2008-01-15

A proper selection of route through the urban area may significantly reduce the air pollution exposure. This is the main conclusion from the presented study. Air pollution exposure is determined for two selected cohorts along the route going from home to working place, and back from working place to home. Exposure is determined with a street pollution model for three scenarios: bicycling along the shortest possible route, bicycling along the low exposure route along less trafficked streets, and finally taking the shortest trip using public transport. Furthermore, calculations are performed for the cases the trip takes place inside as well as outside the traffic rush hours. The results show that the accumulated air pollution exposure for the low exposure route is between 10% and 30% lower for the primary pollutants (NO(x) and CO). However, the difference is insignificant and in some cases even negative for the secondary pollutants (NO(2) and PM(10)/PM(2.5)). Considering only the contribution from traffic in the travelled streets, the accumulated air pollution exposure is between 54% and 67% lower for the low exposure route. The bus is generally following highly trafficked streets, and the accumulated exposure along the bus route is therefore between 79% and 115% higher than the high exposure bicycle route (the short bicycle route). Travelling outside the rush hour time periods reduces the accumulated exposure between 10% and 30% for the primary pollutants, and between 5% and 20% for the secondary pollutants. The study indicates that a web based route planner for selecting the low exposure route through the city might be a good service for the public. In addition the public may be advised to travel outside rush hour time periods.

Reframing place promotion, place marketing, and place branding - moving beyond conceptual confusion

NARCIS (Netherlands)

Boisen, Martin; Terlouw, Kees; Groote, Peter; Couwenberg, Oscar

2017-01-01

The literature and practice of place promotion, place marketing and place branding lack a common understanding of what these three concepts mean and through what kind of policies they can be implemented. Although scholars have provided several theoretical frameworks and definitions, both scholars

Strangers in Familiar Places

DEFF Research Database (Denmark)

Muhr, Sara Louise

2012-01-01

Employees working across multiple cultures are exposed to a vast number of different norms and values, and consequentially work is often a struggle to retain a coherent sense of self. However, when international workers travel, they also encounter more bland spaces where familiarity and similarity...... are important. These spaces appear culturally generic to the Western traveler, but are highly Westernized to bring comfort to Western employees traveling in foreign cultures. This paper argues that these spaces are important in cross-cultural identity work in the sense that international workers – professional...... strangers – need these places to belong and relate to familiarity and to regain a sense of identity. Drawing on an illustrative empirical vignette of an international consultant, I demonstrate how culturally generic spaces can be used in identity work of an international relations consultant....

Reducing greenhouse gas emissions and improving air quality: Two global challenges.

Science.gov (United States)

Erickson, Larry E

2017-07-01

There are many good reasons to promote sustainable development and reduce greenhouse gas emissions and other combustion emissions. The air quality in many urban environments is causing many premature deaths because of asthma, cardiovascular disease, chronic obstructive pulmonary disease, lung cancer, and dementia associated with combustion emissions. The global social cost of air pollution is at least $3 trillion/year; particulates, nitrogen oxides and ozone associated with combustion emissions are very costly pollutants. Better air quality in urban environments is one of the reasons for countries to work together to reduce greenhouse gas emissions through the Paris Agreement on Climate Change. There are many potential benefits associated with limiting climate change. In the recent past, the concentrations of greenhouse gases in the atmosphere have been increasing and the number of weather and climate disasters with costs over $1 billion has been increasing. The average global temperature set new record highs in 2014, 2015, and 2016. To reduce greenhouse gas emissions, the transition to electric vehicles and electricity generation using renewable energy must take place in accord with the goals of the Paris Agreement on Climate Change. This work reviews progress and identifies some of the health benefits associated with reducing combustion emissions. © 2017 American Institute of Chemical Engineers Environ Prog, 36: 982-988, 2017.

The Roland Maze Project - school-based extensive air shower network

International Nuclear Information System (INIS)

Feder, J.; Jedrzejczak, K.; Karczmarczyk, J.; Lewandowski, R.; Swarzynski, J.; Szabelska, B.; Szabelski, J.; Wibig, T.

2006-01-01

We plan to construct the large area network of extensive air shower detectors placed on the roofs of high school buildings in the city of Lodz. Detection points will be connected by INTERNET to the central server and their work will be synchronized by GPS. The main scientific goal of the project are studies of ultra high energy cosmic rays. Using existing town infrastructure (INTERNET, power supply, etc.) will significantly reduce the cost of the experiment. Engaging high school students in the research program should significantly increase their knowledge of science and modern technologies, and can be a very efficient way of science popularisation. We performed simulations of the projected network capabilities of registering Extensive Air Showers and reconstructing energies of primary particles. Results of the simulations and the current status of project realisation will be presented

Places disponibles*/Places available **

CERN Multimedia

2003-01-01

Des places sont disponibles dans les cours suivants : Places are available in the following course : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 20 - 22.1.03 (3 days) Introduction to PVSS : 27.1.03 (Afternoon) free course but registration necessary Basic PVSS : 28 - 30.1.03 (3 days) MAGNE-03 - Magnétisme pour l'électrotechnique : 28 - 30.1.03 (3 jours) MAGNE-03 - Magnetism for Technical Electronics : 11 - 13.2.03 (3 days) AutoCAD 2002 - niveau 1 : 24, 25.2 et 3, 4.3.03 (4 jours) AutoCAD 2002 - niveau 2 : 10 & 11.3.03 (2 jours) C++ for Particle Physicists : 10 - 14.3.03 (6 X 3 hour lectures) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Si vous désirez ...

The relations between global flows and local places

DEFF Research Database (Denmark)

Lange, Ida Sofie Gøtzsche

in the case of Hirtshals appreciate a strong community as well as physical vicinity and easy access to nature and their surrounding landscapes, whereas politicians, businesses and other stakeholders operating on a municipal, regional or national level often asses the same place more as a strategic node...... in the balance of power over time. It is argued, that a greater awareness on the differences is key in the professional planning of places, and that it is important to identify and work with potentials of both mobility and place specific concerns to develop such places in a viable way and to assure...

Place Branding in Systems of Place

DEFF Research Database (Denmark)

Zenker, Sebastian; Andéhn, Mikael

2015-01-01

, this presents a challenge, since the role of a place in this system of geographical abstractions constitutes a piece of information more vital than any other in defining the place. Our understanding of places cannot be separated from their scale, and any effort at managing the reputation and meaning.......g. the European Union or Africa). Using the example of nation branding for Sudan and Slovenia, one can identify supranational places such as “sub-Saharan Africa” or “Eastern Europe”, carrying their own highly salient and often negative meaning in much of the Western world. We explore how association to a system...

Changing Work and New Forms of Marginalisation in the Work Place

DEFF Research Database (Denmark)

Thaulow, Ivan; Friche, Claus

By Means of a description of a transition in a Danish industrial Company, attention is brought to three important marginalisational perspectives on the transition from a traditional to a more flexible form of work organisation: latent marginalisation, manifested marginalisation and polarisation...... between insiders and outsiders. In sum the paper demonstrates the relevance of considering marginalisation of employees as a consequence of the transition from a traditional to a more flexible organisation, as well as what the enterprise can do to modify or moderate these consequences....

Technical Training: Places available

CERN Multimedia

DAvide Vitè

2006-01-01

Places available as of 25.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F EXCEL 2003 - niveau 1 : ECDL 16 30-31.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E WORD 2003 (Short Course III) - HowTo... Work with long documents 3 15.09.06 E/F EXCEL 2003 (Short Course I) - HowTo... Wor...

Towards understanding work-as-done in air traffic management safety assessment and design

International Nuclear Information System (INIS)

Woltjer, Rogier; Pinska-Chauvin, Ella; Laursen, Tom; Josefsson, Billy

2015-01-01

This paper describes the approach taken and the results to develop guidance, to include Resilience Engineering principles in methodology for safety assessment of functional changes, in Air Traffic Management (ATM). It summarizes the process of deriving resilience principles for ATM, originating from Resilience Engineering concepts and transposed into ATM operations. These principles are the foundation for guidance material incorporating Resilience Engineering (RE) concepts into safety assessment methodology. The guidance material provides a method using workshops generating qualitative descriptions of RE principles applied to ATM services of everyday work, as done currently and as envisioned after introduction of a new technology or way of working. The guidance material has been proposed as part of the safety assessment methodology of SESAR (Single European Sky ATM Research), and as stand-alone guidance for ATM design processes. The methodology was validated via a test case on the i4D/CTA (Controlled Time of Arrival) concept. Operational examples from the application of the developed guidance to the i4D/CTA concept are provided. Initial evaluation of the guidance suggests that the methodology (1) provides a narrative, vocabulary and documentation means of project discussions on resilience; (2) brings the discussions of safety and resilience closer to operational practice; (3) facilitates a broader systemic and integrative perspective on operational, management, business, safety, environmental, and human performance aspects; and (4) can extend the vocabulary of safety assessment to include the description of emergent properties, to better support functional changes in ATM. - Highlights: • Guidance material for safety assessment based on systemic thinking is proposed. • It operationalizes Resilience Engineering principles in Air Traffic Management, including a case study. • It enables description of expected changes in work-as-done when introducing a new

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11....

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

Le nombre de places disponibles peut varier. Veuillez consulter notre site Web pour avoir la dernière mise à jour. Des places sont disponibles dans les cours suivants :   Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with Auto...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 - 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2...

Administrative law judge as a watchdog for air quality

International Nuclear Information System (INIS)

Schutte-Postma, L.; Van Wee, B.

2005-01-01

Insight is given on the correctness of judgements of the judge for the administrative law in the Netherlands with regard to air quality and the discontinuation of related spatial planning and building and construction projects. Also attention is paid to the new Decree on Air Quality, including the regulation on balancing. This regulation implies that deteriorated air quality in one place must be compensated by improved air quality somewhere else [nl

Air and the origin of the experimental plant physiology.

Science.gov (United States)

Pennazio, Sergio

2005-01-01

It is well known that oxygen and carbon dioxide are two chemicals which enter the plant metabolism as nutrients. The bases of this nowadays obvious statement were placed in the 18th century by means of the works of ingenious naturalists such as Robert Boyle, Stephen Hales, Joseph Priestley, Jam Ingenhousz, Lazzaro Spallanzani and Theodore De Saussure. Till the end of the 17th century, the atmospheric air was considered as an ineffable spirit, the function of which was of physical nature. Boyle was the first naturalist to admit the possibility that respiration were an exchange of vapours occurring in the blood. Stephen Hales realised that air could be fixed by plants under the influence of solar light. Priestley showed that plants could regenerate the bad air making it breathable. Ingenhousz demonstrated that the green parts of plants performed the complete purification of air only under the influence of the light. Spallanzani discovered that plants respire and guessed that the good air (oxygen) originated from the fixed air (carbon dioxide). Finally, Theodore De Saussure showed that plants were able to adsorb carbon dioxide and to release oxygen in a proportional air. All these discoveries benefited of the results coming from investigations of scholars of the so-called "pneumatic chemistry" (Boyle himself, George Ernst Stahl, Joseph Black, Priestley himself, and many more others. But among all the eminent scientists above mentioned stands out the genius of Antoine Laurent Lavoisier, who revolutionised the chemistry of the 18th century ferrying it towards the modern chemistry.

A persisting secondhand smoke hazard in urban public places: results from fine particulate (PM2.5) air sampling.

Science.gov (United States)

Wilson, Nick; Edwards, Richard; Parry, Rhys

2011-03-04

To assess the need for additional smokefree settings, by measuring secondhand smoke (SHS) in a range of public places in an urban setting. Measurements were made in Wellington City during the 6-year period after the implementation of legislation that made indoor areas of restaurants and bars/pubs smokefree in December 2004, and up to 20 years after the 1990 legislation making most indoor workplaces smokefree. Fine particulate levels (PM2.5) were measured with a portable real-time airborne particle monitor. We collated data from our previously published work involving random sampling, purposeful sampling and convenience sampling of a wide range of settings (in 2006) and from additional sampling of selected indoor and outdoor areas (in 2007-2008 and 2010). The "outdoor" smoking areas of hospitality venues had the highest particulate levels, with a mean value of 72 mcg/m3 (range of maximum values 51-284 mcg/m3) (n=20 sampling periods). These levels are likely to create health hazards for some workers and patrons (i.e., when considered in relation to the WHO air quality guidelines). National survey data also indicate that these venues are the ones where SHS exposure is most frequently reported by non-smokers. Areas inside bars that were adjacent to "outdoor" smoking areas also had high levels, with a mean of 54 mcg/m3 (range of maximum values: 18-239 mcg/m3, for n=13 measurements). In all other settings mean levels were lower (means: 2-22 mcg/m3). These other settings included inside traditional style pubs/sports bars (n=10), bars (n=18), restaurants (n=9), cafes (n=5), inside public buildings (n=15), inside transportation settings (n=15), and various outdoor street/park settings (n=22). During the data collection in all settings made smokefree by law, there was only one occasion of a person observed smoking. The results suggest that compliance in pubs/bars and restaurants has remained extremely high in this city in the nearly six years since implementation of the

Places available**

CERN Multimedia

Places are available in the following courses: Hands-on Introduction to Python Programming: 11-13.08.2003 (3 days) Introduction to the CERN Engineering Data Management System (EDMS): 26.08.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Engineers: 27.08.2003 (1 day) CLEAN-2002 : Travailler en salle blanche : 4.09.2003 (une demi-journée) AutoCAD 2002 - Level 1: 4, 5, 15, 16.09.2003 (2 x 2 days) AutoCAD Mechanical 6 PowerPack : 17, 18, 25, 26.09.2003 et 2, 3.10.2003 (3 x 2 journées, français) AutoCAD 2002 - niveau 1 : 23, 24, 30.09.2003 et 1.10.2003 (2 x 2 journées) Introduction to the CERN Engineering Data Management System (EDMS): 23.09.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Local Administrators: 24-25.09.2003 (2 days) AutoCAD 2002 - niveau 2 : 8 et 10.10.2003 (2 journées) CLEAN-2002: Working in a Cleanroom: 23.10.2003 (half day, p.m.) ** The number of places available may vary. Please check our Web site to find out the current availabili...

Places available**

CERN Multimedia

2003-01-01

Places are available in the following courses: Hands-on Introduction to Python Programming: 11-13.08.2003(3 days) Introduction to the CERN Engineering Data Management System (EDMS): 26.08.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Engineers: 27.08.2003 (1 day) CLEAN-2002 : Travailler en salle blanche : 4.09.2003 (une demi-journée) AutoCAD 2002 - Level 1: 4, 5, 15, 16.09.2003 (2 x 2 days) AutoCAD Mechanical 6 PowerPack : 17, 18, 25, 26.09.2003 et 2, 3.10.2003 (3 x 2 journées, français) AutoCAD 2002 - niveau 1 : 23, 24, 30.09.2003 et 1.10.2003 (2 x 2 journées) Introduction to the CERN Engineering Data Management System (EDMS): 23.09.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Local Administrators: 24-25.09.2003 (2 days) AutoCAD 2002 - niveau 2 : 8 et 10.10.2003 (2 journées) CLEAN-2002: Working in a Cleanroom: 23.10.2003 (half day, p.m.) ** The number of places available may vary. Please ch...

Places available **

CERN Multimedia

2003-01-01

Des places sont disponibles dans les cours suivants : Places are available in the following courses : C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, registration required) LabView base 1/LabView Basics 1 : 9 - 11.4.03 (3 jours/3 days) Langue à définir/language to be decided DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 11 & 12.3.03 / 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16...

Design and cold-air test of single-stage uncooled turbine with high work output

Science.gov (United States)

Moffitt, T. P.; Szanca, E. M.; Whitney, W. J.; Behning, F. P.

1980-01-01

A solid version of a 50.8 cm single stage core turbine designed for high temperature was tested in cold air over a range of speed and pressure ratio. Design equivalent specific work was 76.84 J/g at an engine turbine tip speed of 579.1 m/sec. At design speed and pressure ratio, the total efficiency of the turbine was 88.6 percent, which is 0.6 point lower than the design value of 89.2 percent. The corresponding mass flow was 4.0 percent greater than design.

Data analysis of in place tests of iodine filters in the French nuclear facilities

International Nuclear Information System (INIS)

Mulcey, P.; Trehen, L.; Rouyer, J.L.

1983-01-01

The first part of the paper is devoted to the characteristics of the iodine adsorbers which equip French air cleaning systems and to their operating conditions. The analysis of the data obtained with in place testing of iodine filters is developed further on. Data already available and new complementary data to be obtained are examined. An analysis of the results of in place tests will give an idea of the rejection level observed for acceptance tests and will show the possible influence of several parameters (air velocity, relative humidity, ageing) upon the measured decontamination factors. Finally, an assessment is made of the evolution of French cleaning systems during the last few years and of the complementary measurements to be carried out in the frame of the standardized test method

History of Space-Based Infrared Astronomy and the Air Force Infrared Celestial Backgrounds Program

Science.gov (United States)

2008-04-18

previous work by ASE in the classified domain. The Air Force was receptive to providing support to place a small aperture (1 cm²) Geiger counter aboard...1970). On July 4, 1969 we loaded up a U-Haul trailer , having put the baby grand piano into storage, and set off for Boston, arriving two days later... movies were shown in the pub, Thursday had evening shopping and, on an occasional Saturday afternoon, amateur Australian rules football. Otherwise

Determination of technical and economic parameters of an ionic transport membrane air separation unit working in a supercritical power plant

Directory of Open Access Journals (Sweden)

Kotowicz Janusz

2016-09-01

Full Text Available In this paper an air separation unit was analyzed. The unit consisted of: an ionic transport membrane contained in a four-end type module, an air compressor, an expander fed by gas that remains after oxygen separation and heat exchangers which heat the air and recirculated flue gas to the membrane operating temperature (850 °C. The air separation unit works in a power plant with electrical power equal to 600 MW. This power plant additionally consists of: an oxy-type pulverized-fuel boiler, a steam turbine unit and a carbon dioxide capture unit. Life steam parameters are 30 MPa/650 °C and reheated steam parameters are 6 MPa/670 °C. The listed units were analyzed. For constant electrical power of the power plant technical parameters of the air separation unit for two oxygen recovery rate (65% and 95% were determined. One of such parameters is ionic membrane surface area. In this paper the formulated equation is presented. The remaining technical parameters of the air separation unit are, among others: heat exchange surface area, power of the air compressor, power of the expander and auxiliary power. Using the listed quantities, the economic parameters, such as costs of air separation unit and of individual components were determined. These quantities allowed to determine investment costs of construction of the air separation unit. In addition, they were compared with investment costs for the entire oxy-type power plant.

Air-conditioner filters enriching dust mites allergen.

Science.gov (United States)

Zhan, Xiaodong; Li, Chaopin; Xu, Haifeng; Xu, Pengfei; Zhu, Haibin; Diao, Jidong; Li, Na; Zhao, Beibei

2015-01-01

We detected the concentration of dust mites allergen (Der f1 & Der p1) in the air of different places before and after the starting of air-conditioners in Wuhu City, Anhui, China, and to discuss the relation between the dust mites allergen in air-conditioner filters and the asthma attack. The dust samples were collected from the air-conditioner filters in dining rooms, shopping malls, hotels and households respectively. Concentrations of dust mites major group allergen 1 (Der f 1, Der p1) were detected with enzyme linked immunosorbent assay (ELISA), and the dust mite immune activities were determined by dot-ELISA. The concentration of Der f1 in dining rooms, shopping malls, hotels and households was 1.52 μg/g, 1.24 μg/g, 1.31 μg/g and 1.46 μg/g respectively, and the concentration of Der p1 in above-mentioned places was 1.23 μg/g, 1.12 μg/g, 1.16 μg/g and 1.18 μg/g respectively. The concentration of Der f1 & Der p1 in air was higher after the air-conditioners starting one hours later, and the difference was significant (Pair-conditioner filters can enrich dust mites major group allergen, and the allergens can induce asthma. The air-conditioner filters shall be cleaned or replaced regularly to prevent or reduce accumulation of the dust mites and its allergens.

Biomass and air quality the UK experience

International Nuclear Information System (INIS)

Dearnley, E.

2009-01-01

Policies to encourage the use of biomass in the UK can perhaps be held up as an example of how not to develop integrated environmental policy. The UK has considered the air quality effects of biomass burning only after putting in place policies that will hugely increase the amount of biomass burning plant that will be installed. Whilst these issues are now being addressed, it will be some time before a satisfactory framework will be in place. The current situation is not a positive one for all involved - air quality practitioners, climate change policy makers and the wider biomass industry. For clean air organisations such as Environmental Protection UK and our European counterparts there are essentially two lessons to take away. The first is that we have to raise our sights to look for potential threats to air quality from wider policy measures, and flag up potential concerns at the earliest opportunity. It is easy to focus on the job in hand (for example emissions from vehicles) and miss developments further afield. Secondly, and most importantly, we have to offer our own solutions to wider environmental challenges. Climate change is likely to remain the dominant global environmental issue for decades to come; clean air agencies need to understand this and put forward low carbon solutions that offer strong synergies with air quality. The alternative is for policy makers to see air i quality standards and clean air agencies as a barrier t to progress towards a low carbon economy, rather than a positive source of solutions. (N.C.)

Normal people working in normal organizations with normal equipment: system safety and cognition in a mid-air collision.

Science.gov (United States)

de Carvalho, Paulo Victor Rodrigues; Gomes, José Orlando; Huber, Gilbert Jacob; Vidal, Mario Cesar

2009-05-01

A fundamental challenge in improving the safety of complex systems is to understand how accidents emerge in normal working situations, with equipment functioning normally in normally structured organizations. We present a field study of the en route mid-air collision between a commercial carrier and an executive jet, in the clear afternoon Amazon sky in which 154 people lost their lives, that illustrates one response to this challenge. Our focus was on how and why the several safety barriers of a well structured air traffic system melted down enabling the occurrence of this tragedy, without any catastrophic component failure, and in a situation where everything was functioning normally. We identify strong consistencies and feedbacks regarding factors of system day-to-day functioning that made monitoring and awareness difficult, and the cognitive strategies that operators have developed to deal with overall system behavior. These findings emphasize the active problem-solving behavior needed in air traffic control work, and highlight how the day-to-day functioning of the system can jeopardize such behavior. An immediate consequence is that safety managers and engineers should review their traditional safety approach and accident models based on equipment failure probability, linear combinations of failures, rules and procedures, and human errors, to deal with complex patterns of coincidence possibilities, unexpected links, resonance among system functions and activities, and system cognition.

[Research on the incidence of decompression sickness in compressed air works. The development of its recent five years' study].

Science.gov (United States)

Mano, Y; Shibayama, M; Matsui, Y

1987-07-01

Compressed air works have been used as the safest construction work for the basic underground or underwater compressed shield or caisson works in Japan; however, the workers who were exposed to the compressed fields must have put themselves at risk of decompression sickness. Decompression sickness is generally considered to be due to the bubble effects and the bubbles originate from the supersaturated gas dissolved in the blood and other tissues. The standard decompression schedule by the Ministry of Labor has been practically applied at the end of compressed air works, and the laborers decompress slowly from the bottom pressure to the surface according to the schedule. It is difficult to completely prevent the sickness and the average percentage of contracting "bends," using the Japanese standard decompression schedule, is considered to be 0.54%. But previous papers reported higher incidences from 1.42 to 3.3% or more. We have continued an actual investigation on the incidence, and the number of the exposed trials amounted to nearly a hundred thousand. These data were compared between recent five years' group and before. Eventually, it was ascertained that the incidence has been significantly decreased in the recent five years; however, greater care in occupational safety control is still needed.

CALCULATION OF AIR ION REGIME IN THE CASE OF ARTIFICIAL AIR IONIZATION

Directory of Open Access Journals (Sweden)

BILIAIEV M. M.

2015-10-01

Full Text Available Purpose. One of the major tasks in the field of labor protection is providing of the necessary qualitative composition of air in the working areas of office and industrial spaces. In order to maintain the necessary air ion level in the air space premises, the artificial ionization of air is used often in the premises. At present in Ukraine analytical model are used for the calculation of air ion regime in premises, influencing on the formation process of air ions concentration field. An alternative solution is the use of CFD models, developing including the air jets aerodynamics in the premise, the presence of furniture, equipment, transfer of ions under an electric field, and other physical factors, determining intensity and shape of air ions concentration field in the premise. Methodology. Influence of air flow was taken into account in the development of CFD models for calculation of air ion regime in the apartment, caused by operation of ventilation, diffusion, electric field impact, as well as the interaction of different polarity ions with each other, and their interaction with dust particles. The proposed model of calculation of air ion regime in premises based on the use of aerodynamics, electrostatics and mass transfer levels. This model allows operatively to calculate air ions concentration field with the influence of the walls, floor, ceiling and obstacles on the process of air ions dispersion, the specific location of different polarity ions emission and their interaction in the premise and work areas in conditions of artificial air ionization. Results. The calculated data were obtained and on their base could be estimated the concentration of air ion anywhere in the premise with artificial air ionization. Ions concentration field, being calculated using this CFD model, as concentration field isolines is presented. Originality. The results of the air ion regime calculation in the premise are presented, based on numerical 2D CFD model

Designated Places

Data.gov (United States)

California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

Disruptive Innovation in Air Measurement Technology: Reality ...

Science.gov (United States)

This presentation is a big picture overview on the changing state of air measurement technology in the world, with a focus on the introduction of low-cost sensors into the market place. The presentation discusses how these new technologies may be a case study in disruptive innovation for the air pollution measurement field. The intended audience is primarily those with experience in air pollution measurement methods, but much of the talk is accessible to the general public. This is a keynote presentation on emerging air monitoring technology, to be provided at the AWMA measurements conference in March, 2016.

Inspector General, DOD, Oversight of the Air Force Audit Agency Audit of the FY 1999 Working Capital Fund Financial Statements

National Research Council Canada - National Science Library

Lane, F

2000-01-01

An audit of the Air Force Working Capital Fund financial statements is required by Public Law 101-576, the "Chief Financial Officers Act of 1990," November 15, 1990, as amended by Public Law 103-356...

In-Time On-Place Learning

Science.gov (United States)

Bauters, Merja; Purma, Jukka; Leinonen, Teemu

2014-01-01

The aim of this short paper is to look at how mobile video recording devices could support learning related to physical practices or places and situations at work. This paper discusses particular kind of workplace learning, namely learning using short video clips that are related to physical environment and tasks preformed in situ. The paper…

Infrared Thermography As Quality Control For Foamed In-Place Insulation

Science.gov (United States)

Schwartz, Joel A.

1989-03-01

Since November of 1985, FOAM-TECH, INC. has been utilizing an I.S.I. Model 91 Videotherm Camera to quality control the installation of foamed in-place polyurethane and polyisocyanurate insulation. Monitoring the injection of foam into the walls and roofs of new construction and during the the retrofitting of older buildings has become an integral and routine step in daily operations. The Videotherm is also used to monitor the injection of foam into hot water tanks, trailer bodies for refrigeration trucks, and pontoons and buoys for flotation. The camera is also used for the detection of heat loss and air infiltration for conventionally insulated buildings. Appendix A are thermograms of foamed in-place insulation.

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 11.7.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS – Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E LabVIEW: Working efficiently with LabWIEW 8 8 18.09.06 E PCAD Schémas ? Introduction 16 21-22.09.06 F PCAD PCB - Introduction  24 27-29.09.06 F C++ for Particle Physicists ...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 21.3.2006 (March-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language FrontPage 2003 - niveau 1 16 27-28.03.06 F Oracle Forms Developer 10g: Move to the Web 16 27-28.03.06 E ACCESS 2003 - Level 2: ECDL AM5 16 3-4.03.06 E-F JAVA 2 Enterprise Edition - Part 1: Web Applications 16 3-4.04.06 E JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans 24 5-7.04.06 E AutoCAD Mechanical 2006 16 11-12.04.06 F FrontPage 2003 - niveau 2 16 24-25.04.06 F C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming 24 25-27.04.06 E AutoCAD 2006 - niveau 1 32 27.04-4.05.06 F Oracle: SQL 24 3-5.05.06 E EXCEL 2003 (Short Course I) - HowTo... Work with formulae 3 4.05.06 (am) E-F EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing 3 4...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27.02.06 E-F JAVA: Level 2 32 28.02-3.03.06 E Manipulation des images 4 28.02.06 F ACCESS 2003 - Level 2: ECDL AM5 16 2-3.03.06 E-F C++ for Particle Physicists 20 6-10.03.06 E PowerPoint 2003 8 9.03.06 F JCOP: Control System Integration using JCOP Tools 24 14-16.03.06 E EXCEL 2003 (Short Course III) - HowTo... Pivot tables 3 20.03.06 E-F EXCEL 2003 (Short Course IV) - HowTo....Link cells, worksheets and workbooks 3 20.03.06 E-F JCOP: Finite State Machines in the JCOP Framework 24 21-23.03.06 E Object-Oriented Analysis and Design using UML 24 21-23.03.06 E FrontPage 2003 - niveau 1 16 27-28.03.06 F JCOP: Joint PVSS-JCOP Fram...

Modelling Hot Air Balloons.

Science.gov (United States)

Brimicombe, M. W.

1991-01-01

A macroscopic way of modeling hot air balloons using a Newtonian approach is presented. Misleading examples using a car tire and the concept of hot air rising are discussed. Pressure gradient changes in the atmosphere are used to explain how hot air balloons work. (KR)

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language AutoCAD Mechanical 2006 16 30 to 31-01-06 F DIAdem : base 24 01 to 03-02-06 F ACROBAT 7.0 : Utilisation de fichiers PDF 8 06-02-06 F Manipulation des images 4 08-02-06 F OUTLOOK 2003 (Short Course I) - E-mail 3 09-02-06 E-F WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F JCOP: Control System Integration using JCOP Tools 24 14 to 16-02-06 E OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 16-02-06 E-F WORD 2003 (Short Course III) - HowTo... Work with long documents 3 16-02-06 E-F FrontPage 2003 - niveau 1 16 23 to 24-02-06 F OUTLOOK 2003 (Short Course III) - Meetings and Delegation 3 27-02-06 E-F WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27-02-06 E-F ...

Peaks of air pollution and public health. The place of epidemiology; Pics de pollution atmospherique et sante publique. La place de l'epidemiologie

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The epidemiological surveillance of sanitary effects linked to the air pollution seems to be the best tool to estimate their impact and to keep a close eye on the short term effects of the ambient pollution on the populations health. In any case, the potential sanitary impact of pollution peaks does not conceal the importance of sanitary effects linked to the background pollution. These peaks constitute sanitary alert signals but are not inevitably the predominant risk for public health. A targeting on these peaks can lead to neglect actions of prevention and to induce these policies towards strategies that will not be the most efficient in term of reduction of mortality attributable to air pollution. (N.C.)

Places available **

CERN Multimedia

2003-01-01

Des places sont disponibles dans les cours suivants : Places are available in the following courses : Introduction à Windows 2000 au CERN : 25.2.03 (1/2 journée) LabView base 2/LabView Basics 2 : 10 & 11.3.03 (2 jours/2 days) langue à définir/Language to be decided C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) LabView avancé /LabView Advanced : 12 - 14.3.03 (3 jours/3days) Langue à définir/Language to be decided AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, registration required) LabView base 1/LabView Basics 1 : 9 - 11.4.03 (3 jours/3 days) Langue à définir/Language to be decided DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (...

Places available **

CERN Multimedia

2003-01-01

Des places sont disponibles dans les cours suivants : Places are available in the following courses : DISP-2003 - Spring I Term : Introduction to Digital Signal Processing : 20, 27.2, 6, 13, 20, 27.3, 3.4.03 (7 X 2-hour lectures) AXEL-2003 - Introduction to Accelerators : 24 - 28.2.03 (10 X 1-hour lectures) AutoCAD 2002 - niveau 1 : 24, 25.2 & 3, 4.3.03 (4 jours) Introduction à Windows 2000 au CERN : 25.2.03 (1/2 journée) LabView base 2/LabView Basics 2 : 10 & 11.3.03 (2 jours/2 days) langue à définir/Language to be decided C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) LabView avancé /LabView Advanced : 12 - 14.3.03 (3 jours/3days) Langue à définir/language to be decided AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, regis...

Placing outer space an earthly ethnography of other worlds

CERN Document Server

Messeri, Lisa

2016-01-01

Lisa Messeri traces how planetary scientists-whether working in the Utah desert, a Chilean observatory, or the labs of MIT-transform celestial bodies into places in order to understand the universe as densely inhabited by planets, in turn telling us more about Earth, ourselves, and our place in the cosmos.

In-place testing of hydraulic snubbers

International Nuclear Information System (INIS)

Raymont, J.M. Jr.

1986-01-01

Over the last few years, an increasing number of utilities have implemented periodic in-service inspection (ISI) programs of their hydraulic snubbers. This thrust has caused the nuclear power industry to seek cost-effective means of testing hydraulic snubbers. This paper reviews the following aspects of in-place testing and develops a technical justification for its use as a viable alternative to test bench testing. (1) A detailed examination of how in-place testing works is provided. Discussed are the hydraulic principles, fluid flow paths, and snubber test setup. (2) A comparison of the test bench and in-place test machines is provided. The discussion reviews the similarities and differences between the two test methods as well as the test results. (3) The need for correlation of in-place test results back to test bench data with a snubber footprint is discussed. (4) The issue of partial load testing with extrapolation to full load testing is discussed and compared with full load testing. The hydraulic principles as well as the costs and benefits of partial load versus full load testing are compared. (5) In-place test machine technology is reviewed. The operating principles, accuracies, and limitations are presented. (6) Actual test data are provided and reviewed on a test-by-test basis. (7) Lessons learned from actual in-place test jobs are reviewed. (8) In-place test procedures and calibration practices are outlined to illustrate the nature of the required planning on the part of the utility

Place, Non-Place, Multi-Place and the (Non)Possibilities of Identity: Philosophical, Social, and Communicational Aspects

OpenAIRE

Basia Nikiforova

2016-01-01

Michel Foucault in the text “Of Other Spaces: Utopias and Heterotopias” wrote that “the present epoch will perhaps be above all the epoch of space”. Space, place, and territories are social productions. Territory is a polysemic concept. Place is “events” created by territories, fluid areas of control produced by territorial negotiation (horizontal dynamics) and negotiations between places (vertical dynamics). Space produces places and is produced by places. Moreover, space, place and territor...

The ''Nuclear-Karlsruhe'' air-filter system

International Nuclear Information System (INIS)

Berliner, P.; Ohlmeyer, M.; Stotz, W.

1976-01-01

Increasing requirements for exhaust-air filter systems used in nuclear facilities induced the Gesellschaft fuer Kernforschung to develop the ''Nuclear-Karlsruhe'' HEPA filter system. This novel development has profited by experience gained in previous incidents as well as by maitenance and decontamination work performed with different HEPA filter systems. The proved ''Nuclear-Karlsruhe'' system takes equally into account the demands for optimum safety, maximum efficiency and economy, and is distinguished by the following features: (1) The air current is defected by 180 0 in the casing. Deflection causes quite a number of improvements, results in substantial reduction of space requirements, and avoids the dispersion of pollutants to the clean-air side. Besides, the HEPA filter is protected from damage by condensed particles or foreign materials entrained; (2) The ''Nuclear-Karlsruhe'' system allows gas-tight filter replacement. Special replacement collars have been provided at the casing, which allow the tight fastening of replacement bags which are self-locking. (3) In-place testing in the operating condition can be carried out very conveniently because the air is deflected. Minimum leaks in the filter medium or in the filter gasket can be detected by the high-sensitivity visual oil-thread test, which makes leaks distinctly visible as oil mist threads through a transparent front window provided on the clean-air side. The test takes only some minutes and its sensitivity is hardly matched by any other technique. (4) The clamping mechanism is installed outside the casing, i.e. outside the polluted or aggressive media. The contact force is spring-loaded absolutely uniformly to the circular filter gasket. (5) For practical and econmic reasons the filter casings can be locked individually so as to be gas-tight. (6) The entire system is made of stainless or coated steel and metal parts which are corrosion and fire-resistant. (author)

What Works: Air Pollution Solutions. Report No. 1.

Science.gov (United States)

Malaspina, Mark; And Others

This report profiles 69 initiatives and programs from across the country that are effectively reducing smog, air toxics, and chemicals that destroy the ozone layer. Problem solving strategies range from community pressure forcing reduction of industrial emissions, to municipal governments promoting transportation alternatives, to adoption of tough…

Radon daughters and work at display devices

International Nuclear Information System (INIS)

Falk, R.; Nyblom, L.

1986-01-01

It has been shown that ions and electrically charged particles in the air can be transported in the electrostatic field between a face and a display device to either the face or the screen. Radon daughters can occur as ions, or sitting on charged particles. This prestudy shows that radon daughters were manifold concentrated on the face of a doll placed in front of a display device, or in a electrostatic field of the kind typical for displaying devices. The radiation dose, in the skin from the radon daughters in an ordinary office environment plus the addition caused by work at a display device, is not strong enough to cause skin damages alone. (BoK)

Clustering of chronic disease risk factors with tobacco smoking habits among adults in the work place in Sousse, Tunisia.

Science.gov (United States)

Sonia, Hmad; Jihene, Maatoug; Imed, Harrabi; Rim, Ghammem; Mylene, Belkacem; Mounir, Saadi; Souad, Amimi; Khaoula, Knani; Mustafa, Al'Absi; Harry, Lando; Najib, Mrizak; Hassen, Ghannem

2016-01-01

The aim of our study was to explore the major non-communicable risk factors (unhealthy diet, sedentarily, alcohol consumption) of smokers and nonsmokers in workplaces. A cross-sectional study was derived from an initial assessment in workplaces which was part of a community-based intervention to prevent chronic disease risk factors conducted in 2009 in the region of Sousse, Tunisia. The surveyed subjects were employees in six factories spread across three delegations in the region. Overall, 1770 of 2250 employees participated in the assessment. In this study, the clustering of non-communicable diseases risk factors with smoking habits was made only for male employees including in this study 1099 among 2250. Data were collected at worksites by a questionnaire, via interview or self-report. The main items assessed socio-demographics characteristics, smoking status, eating habits, level of physical activity and alcohol use of the participants. The percentage of male smokers was 54.0%(n=594). Their average age of daily smoking initiation was 19.22 (±4.24 years). The percentage of male smokers consuming 5 fruits and vegetables per day was significantly lower than nonsmokers (57.2% vs 63.5%, p=0.04). The proportion of male smokers consuming alcohol was about three times that of nonsmokers (16.5% vs 5.8%, p=0.001). The proportion of male employees who agree with anti-smoking laws in work places was higher for nonsmokers than for smokers. A strong association existed between smoking and risky lifestyles factors in the work place. Such findings are potentially useful in directing intervention efforts regarding smoking cessation in occupational settings.

Tools for Performance Simulation of Heat, Air and Moisture Conditions of Whole Buildings

DEFF Research Database (Denmark)

Woloszyn, Monika; Rode, Carsten

2008-01-01

Humidity of indoor air is an important factor influencing the air quality and energy consumption of buildings as well as durability of building components. Indoor humidity depends on several factors, such as moisture sources, air change, sorption in materials and possible condensation. Since all...... and moisture transfer processes that take place in “whole buildings” by considering all relevant parts of its constituents. It is believed that full understanding of these processes for the whole building is absolutely crucial for future energy optimization of buildings, as this cannot take place without...

The Place of Political Diversity within the Social Work Classroom

Science.gov (United States)

Rosenwald, Mitchell; Wiener, Diane R.; Smith-Osborne, Alexa; Smith, Christine M.

2012-01-01

This article examines political ideology and its implications as a newer diversity variable within social work education. Responding to internal assessments and external critiques of social work education, the dynamics of how diverse political ideologies might manifest in 5 core course concentrations--human behavior in the social environment,…

From sense of place to visualization of place: examining people-place relationships for insight on developing geovisualizations.

Science.gov (United States)

Newell, Robert; Canessa, Rosaline

2018-02-01

Effective resource planning incorporates people-place relationships, allowing these efforts to be inclusive of the different local beliefs, interests, activities and needs. 'Geovisualizations' can serve as potentially powerful tools for facilitating 'place-conscious' resource planning, as they can be developed with high degrees of realism and accuracy, allowing people to recognize and relate to them as 'real places'. However, little research has been done on this potential, and the place-based applications of these visual tools are poorly understood. This study takes steps toward addressing this gap by exploring the relationship between sense of place and 'visualization of place'. Residents of the Capital Regional District of BC, Canada, were surveyed about their relationship with local coastal places, concerns for the coast, and how they mentally visualize these places. Factor analysis identified four sense of place dimensions - nature protection values, community and economic well-being values, place identity and place dependence, and four coastal concerns dimensions - ecological, private opportunities, public space and boating impacts. Visualization data were coded and treated as dependent variables in a series of logistic regressions that used sense of place and coastal concerns dimensions as predictors. Results indicated that different aspects of sense of place and (to a lesser degree) concerns for places influence the types of elements people include in their mental visualization of place. In addition, sense of place influenced the position and perspective people assume in these visualizations. These findings suggest that key visual elements and perspectives speak to different place relationships, which has implications for developing and using geovisualizations in terms of what elements should be included in tools and (if appropriate) depicted as affected by potential management or development scenarios.

TEDx Place Des Nations | 11 December

CERN Multimedia

2014-01-01

On 11 December, Geneva will host the TEDxPlaceDesNations event.   TEDxPlaceDesNations, in the spirit of TED’s “Ideas Worth Spreading” principle, will involve innovators, humanitarians, entrepreneurs, scientists and peacemakers. The eleven speakers will share how their work can help find solutions to today’s challenges. Among the speakers will be Javier Serrano, a CERN physicist and electronics engineer. He is the co-author of the CERN Open Hardware License and the creator of the Open Hardware Repository, a web platform where companies, institutes and individuals can share their hardware designs for free. Additional information is available at the TEDxPlaceDesNations site. The detailed programme will be posted on 28 November. Seats are limited, so registration is essential. The event can be followed by live webcast here.

A work procedure of utilising PCMs as thermal storage systems based on air-TES systems

International Nuclear Information System (INIS)

Iten, M.; Liu, S.

2014-01-01

Highlights: • A procedure to design effective thermal energy storage (TES) system. • A guidance for the selection of the working material (PCM) and the heat exchanger development. • Suggestions for heat transfer enhancement techniques for the air-TES system. • Mathematical, computational and experimental methods optimising the air-TES system. - Abstract: The paper seeks to offer a procedure to design an effective short term thermal energy storage (TES) system using phase change materials. The methodology focus on two main aspects: the selection of the working material and the heat exchanger development. The selection of the appropriate PCMs is one of the main keys for any TES therefore their classifications, properties, advantages and disadvantages need to be investigated. Due to the intensive researches using this kind of materials in the recent years, there are a range of commercial PCMs available and supplied by different companies. However, all types of PCM present their specific problems and therefore requirements are defined in order to select the most suitable PCMs. The other main key when designing TES is related to the heat exchanger formed by the PCM and the cold/hot heat sources. For this step, the choice of the appropriate container to encapsulate the PCM and the heat transfer enhancement techniques are analysed. Distinct methodologies such as experimental and numerical study methods and modelling software tools are presented to analyse the thermal energy performance of the system and achieve the optimal design of the TES system

Air Consumption Analysis of Air-Jet Weaving

Directory of Open Access Journals (Sweden)

RAJ KUMAR KHIANI

2016-07-01

Full Text Available In Textile industry, production is mostly key concern for Industry owner. This always has attracted researchers and machines manufacturers to make new developments in process and machines. Air-jet is one of the leading and successful highest productive weaving machines. However, it is now well established that due to add of charges of compressed air, manufacturing cost of air-jet weaving machine is higher as compared with rapier and projectile weaving machines. This is why countries having energy issues do not prefer air-jet weaving machines comparing projectile weaving machines. In this regard, several researchers and machine manufacturers have continuously been working to improve the efficiency of air-jet weft insertion. However, industry practice is as important as design made by researchers. The aim of this research is to investigate the air consumption of air-jet weaving on industrial scale practice. In this study, five weaving machine of same manufacturer and model were selected. It was observed that despite of manufacturing same quality of fabric, air consumption was varying almost in all weaving machines. Conventionally, mill workers adopt hit and trial practice in weaving industry including airpressure setting which leads to variation of nozzle pressure. Main reason of disparity of air consumption in air-jet weaving machines may be variation of distance from compressor to weaving machines, number of joints, un-necessary valve opening and pipes leakages cause an increase of compressed air consumption.

Public works: Building a Monument to Modern Buenos Aires

Directory of Open Access Journals (Sweden)

Anayvelyse Allen-Mossman

2016-12-01

Full Text Available Understanding the relationship between the project of modernity and urbanism has been key to understanding the city of Buenos Aires’ material transformations throughout the 20th century. This paper considers how thinking about the issues of modernity and urbanism from the perspective of monuments--namely, the Obelisk of Buenos Aires--sheds new light on how elements of this modernizing project were undertaken and how its material markers have been used and manipulated, and modified through their representation in cultural discourse on the city. Rethinking Buenos Aires from the Obelisk implies literally thinking from underground, from the subway lines that form its base and transform it into a popular symbol of mobility.

Air emissions assessment from offshore oil activities in Sonda de Campeche, Mexico.

Science.gov (United States)

Schifter, I; González-Macías, C; Miranda, A; López-Salinas, E

2005-10-01

Air emission data from offshore oil platforms, gas and oil processing installations and contribution of marine activities at the Sonda de Campeche, located at the Gulf of Mexico, were compiled and integrated to facilitate the study of long range transport of pollutants into the region. From this important region, roughly 76% of the total Mexican oil and gas production is obtained. It was estimated that the total air emissions of all contaminants are approximately 821,000 tons per year. Hydrocarbons are the largest pollutant emissions with 277,590 tons per year, generated during flaring activities, and SOx in second place with 185,907 tons per year. Marine and aviation activities contribute with less than 2% of total emissions. Mass of pollutants emitted per barrel of petroleum produced calculated in this work, are in the range reported by similar oil companies.

"Good" Places to Work: Women Faculty, Community Colleges, Academic Work, and Family Integration

Science.gov (United States)

Ward, Kelly; Wolf-Wendel, Lisa

2017-01-01

This chapter draws on a longitudinal study about women faculty, work-family, and career advancement in community colleges. The study found that the participants, though highly satisfied with their careers and qualified for administration, are largely uninterested in moving to more senior administrative positions.

Hazardous air pollutant handbook: measurements, properties, and fate in ambient air

Energy Technology Data Exchange (ETDEWEB)

Spicer, C.W. (ed.); Gordon, S.M.; Kelly, T.J.; Holdren, M.W.; Mukund, R. [Battelle, Columbus, OH (United States)

2002-07-01

Focussing on the 188 hazardous air pollutants (HAPs) identified in the Title III of the US Clean Air Act Amendments, this work reviews the methods used to identify, measure, and locate the presence of toxics in ambient air. After a classification and characterization of the HAPs, the current status of ambient measurement methods are surveyed and categorized according to applicable, likely, and potential methods. The results of studies of ambient air concentrations of the HAPs are presented. Methods used to study atmospheric transformations of toxic air pollutants are reviewed and the concept of atmospheric lifetimes of HAPs is discussed.

Preparatory work for the start of the Swiss Compressed-Air Efficiency campaign and accompanying work on the setting-up of a compressed air competence centre; Vorarbeiten zum Start der Kampagne Druckluft effizient Schweiz und begleitende Arbeiten zum Aufbau eines Druckluftkompetenzzentrums

Energy Technology Data Exchange (ETDEWEB)

Radgen, P. [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany); Stadelmann, B. [Hochschule fuer Technik und Architektur (HTA) Luzern, Horw (Switzerland)

2004-07-01

This final report for the Swiss Federal Office of Energy (SFOE) takes a look at how a campaign on compressed-air efficiency was prepared. Three work packages are described: The drawing-up of an implementation plan which defined the measures to be implemented by the campaign, incorporation of all relevant players in the preparation and acquisition of companies for the active realisation and co-financing of the activities, and a pilot project to optimise the compressed air supply in a chemical company. The institutions involved are introduced and the definition of the concept to be implemented is discussed. Measurement campaigns, benchmarking and publications to be made are discussed. The implementation of a pilot project at a chemicals company in Switzerland is described.

The right place? Users and professionals' constructions of the place's influence on personal recovery in community mental health services.

Science.gov (United States)

Femdal, Ingrid

2018-01-01

Current mental health policy emphasizes the importance of community-based service delivery for people with mental health problems to encompass personal recovery. The aim of this study is to explore how users and professionals construct the place's influence on personal recovery in community mental health services. This is a qualitative, interpretive study based on ten individual, semi-structured interviews with users and professionals, respectively. A discourse analysis inspired by the work of Foucault was used to analyze the interviews. The findings show how place can be constructed as a potential for and as a barrier against recovery. Constructions of the aim of the services matter when choosing a place for the services. Further, constructions of user-professional relationships and flexibility are important in the constructions of an appropriate place for the services. The aim of the service, the user-professional relationship, and flexibility in choosing place were essential in the participants' constructions. To find "the right place" for mental health services was constructed as context-sensitive and complex processes of assessment and co-determination. Trial registration The study is approved by the Regional Committee for Medical Research Ethics, Norway (REK-Midt 2011/2057).

CFD Analysis to Study Effect of Circular Vortex Generator Placed in Inlet Section to Investigate Heat Transfer Aspects of Solar Air Heater

Directory of Open Access Journals (Sweden)

Vipin B. Gawande

2014-01-01

Full Text Available CFD analysis of 2-dimensional artificially roughened solar air heater duct with additional circular vortex generator, inserted in inlet section is carried out. Circular transverse ribs on the absorber plate are placed as usual. The analysis is done to investigate the effect of inserting additional vortex generator on the heat transfer and flow friction characteristics inside the solar air heater duct. This investigation covers relative roughness pitch in the range of 10 ≤ P/e ≤ 25 and relevant Reynolds numbers in the range of 3800 ≤ Re ≤ 18000. Relative roughness height (e/D is kept constant as 0.03 for analysis. The turbulence created due to additional circular vortex generator increases the heat transfer rate and at the same time there is also increase in friction factor values. For combined arrangement of ribs and vortex generator, maximum Nusselt number is found to be 2.05 times that of the smooth duct. The enhancement in Nusselt number with ribs and additional vortex generator is found to be 1.06 times that of duct using ribs alone. The maximum increase in friction factor with ribs and circular vortex generator is found to be 2.91 times that of the smooth duct. Friction factor in a combined arrangement is 1.114 times that in a duct with ribs alone on the absorber plate. The augmentation in Thermal Enhancement Factor (TEF with vortex generator in inlet section is found to be 1.06 times more than with circular ribs alone on the absorber plate.

CFD analysis to study effect of circular vortex generator placed in inlet section to investigate heat transfer aspects of solar air heater.

Science.gov (United States)

Gawande, Vipin B; Dhoble, A S; Zodpe, D B

2014-01-01

CFD analysis of 2-dimensional artificially roughened solar air heater duct with additional circular vortex generator, inserted in inlet section is carried out. Circular transverse ribs on the absorber plate are placed as usual. The analysis is done to investigate the effect of inserting additional vortex generator on the heat transfer and flow friction characteristics inside the solar air heater duct. This investigation covers relative roughness pitch in the range of 10 ≤ P/e ≤ 25 and relevant Reynolds numbers in the range of 3800 ≤ Re ≤ 18000. Relative roughness height (e/D) is kept constant as 0.03 for analysis. The turbulence created due to additional circular vortex generator increases the heat transfer rate and at the same time there is also increase in friction factor values. For combined arrangement of ribs and vortex generator, maximum Nusselt number is found to be 2.05 times that of the smooth duct. The enhancement in Nusselt number with ribs and additional vortex generator is found to be 1.06 times that of duct using ribs alone. The maximum increase in friction factor with ribs and circular vortex generator is found to be 2.91 times that of the smooth duct. Friction factor in a combined arrangement is 1.114 times that in a duct with ribs alone on the absorber plate. The augmentation in Thermal Enhancement Factor (TEF) with vortex generator in inlet section is found to be 1.06 times more than with circular ribs alone on the absorber plate.

Mobilising Community? Place, Identity Formation and New Teachers' Learning

Science.gov (United States)

Somerville, Margaret; Rennie, Jennifer

2012-01-01

This paper analyses data from a longitudinal study which foregrounds the category of "place" to ask: How do new teachers learn to do their work, and how do they learn about the places and communities in which they begin teaching? Surveys and ethnographic interviews were carried out with 35 new teachers over a three-year period in a…

Experimental verification of air flow rate measurement for representative isokinetic air sampling in ventilation stacks

International Nuclear Information System (INIS)

Okruhlica, P.; Mrtvy, M.; Kopecky, Z.

2009-01-01

Nuclear facilities are obliged to monitor their discharge's influence on environment. Main monitored factions in NPP's ventilation stacks are usually noble gasses, particulates and iodine. These factions are monitored in air sampled from ventilation stack by means of sampling rosette and bypass followed with on-line measuring monitors and balance sampling devices with laboratory evaluations. Correct air flow rate measurement and representative iso-kinetic air sampling system is essential for physical correct and metrological accurate evaluation of discharge influence on environment. Pairs of measuring sensors (Anemometer, pressure gauge, thermometer and humidity meter) are symmetrically placed in horizontal projection of stack on positions based on measured air flow velocity distribution characteristic, Analogically diameter of sampling rosette nozzles and their placement in the middle of 6 - 7 annuluses are calculated for assurance of representative iso-kinetic sampling. (authors)

Experimental verification of air flow rate measurement for representative isokinetic air sampling in ventilation stacks

International Nuclear Information System (INIS)

Okruhlica, P.; Mrtvy, M.; Kopecky, Z.

2008-01-01

Nuclear facilities are obliged to monitor their discharge's influence on environment. Main monitored factions in NPP's ventilation stacks are usually noble gasses, particulates and iodine. These factions are monitored in air sampled from ventilation stack by means of sampling rosette and bypass followed with on-line measuring monitors and balance sampling devices with laboratory evaluations. Correct air flow rate measurement and representative iso-kinetic air sampling system is essential for physical correct and metrological accurate evaluation of discharge influence on environment. Pairs of measuring sensors (Anemometer, pressure gauge, thermometer and humidity meter) are symmetrically placed in horizontal projection of stack on positions based on measured air flow velocity distribution characteristic, Analogically diameter of sampling rosette nozzles and their placement in the middle of 6- 7 annuluses are calculated for assurance of representative iso-kinetic sampling. (authors)

Indoor Air Quality Manual.

Science.gov (United States)

Baldwin Union Free School District, NY.

This manual identifies ways to improve a school's indoor air quality (IAQ) and discusses practical actions that can be carried out by school staff in managing air quality. The manual includes discussions of the many sources contributing to school indoor air pollution and the preventive planning for each including renovation and repair work,…

Experimental investigations on automobile air conditioners working with R134a and R290/R600a as an alternative

Directory of Open Access Journals (Sweden)

Kandhaswamy Karthikeyan

2017-01-01

Full Text Available In this work, the performance of R134a based automobile air conditioning system has been evaluated by retrofitted with R290/R600a mixture (in the ratio of 50:50, by mass, as an alternative. The performance was evaluated at five different operating speeds (1000, 1500, 2000, 2500, and 3000, which covers the entire range of working conditions with four different cabin load (100, 200, 300, and 400 W. The condenser inlet air temperature was varied in the range between 30 and 50°C, which covers the entire climatic variations in Coimbatore city of India. The performance characteristics such as, refrigerating effect, coefficient of performance, compressor power consumption, and compressor discharge temperatures were considered for comparison. The results showed that, hydrocarbon mixture has faster cooling rate due to its high latent heat of vaporization, 5% higher coefficient of performance due to higher refrigeration effect, 8-10 K lower compressor discharge temperature due to its lower specific heat ratio with 5% lower compressor power consumption due to its lower viscosity and lower liquid density. The charge requirement of R290/R600a mixture is about 50% less compared to R134a. However, the mixture composition is considered as an interment replacement in automobile air conditioners due to composition shift under leak-age conditions. Hence, R290/R600a mixture is considered as an interim energy efficient and environment friendly option in R134a automobile air conditioners to extend its life.

Bibliography of work on the heterogeneous photocatalytic removal of hazardous compounds from water and air: Update Number 1 to June, 1995

Energy Technology Data Exchange (ETDEWEB)

Blake, D.M.

1995-11-01

This report is an update of a bibliography, published in May, 1994, of research performed on the photocatalytic oxidation of organic or inorganic compounds in air or water and on the photocatalytic reduction of metal-containing ions in water. The general focus of the research is on removing hazardous contaminants from air water to meet environmental or health regulations. The processes covered are based on the application of heterogeneous photocatalysts. The current state-of-the-art in catalysts are forms of titanium dioxide or modifications of titanium dioxide, but work on other heterogeneous catalysts is also included in this compilation. This update contains 574 references, most published between January, 1993 and June, 1995, but some references are from earlier work that were not included in the previous report. A new section has been added which gives information about companies that are active in providing products based on photocatalytic processes or that can provide pilot, demonstration, or commercial-scale water- or air-treatment systems. Key words, assigned by the author of this report, have been included with the citations in the listing of the bibliography.

Moving towards cleaner air: a progress report on the air quality strategy for the City of Toronto

International Nuclear Information System (INIS)

2001-06-01

The City of Toronto Environmental Plan was adapted in principle by City Council in April 2000. The Plan contains 66 recommendations on land, air, water, governance, sustainability, energy, transportation, green economic development and monitoring. As part of the actions on air, the Plan recommended that the City develop a comprehensive strategy to make Toronto's air clean and free of harmful levels of pollutants. This document reports on progress in the development of this comprehensive air quality standard. Work on the standards was undertaken by an Air Quality Strategy Interdepartmental Working Group (AQSI Working Group) consisting of city departmental representatives, which is one of several working groups reporting to the Toronto Interdepartmental Environmental Team (TIE). While the AQSI Working Group has not yet concluded its work, it is able to report a number of preliminary conclusions. Among them are: implementation of several successful city-wide programs. In this context preliminary indications are that program effectiveness will be limited by the availability of staff and appropriate funding. Policy and legal studies that will provide essential information relating to the legal/jurisdictional context are well underway. Modelling and monitoring of Toronto's air quality are in progress, and will be relied upon for information to guide policy development. Final strategy will have to be formulated in a regional context, in concert with the provincial and federal governments, and will have to take into account trans-boundary (inter-regional, inter-provincial and international) issues

Air Force and Diversity: The Awkward Embrace

Science.gov (United States)

2013-02-14

people of color into their training films .60 The Air Force will stagnate in its diversity efforts without an in-depth review and overhaul of...December 2012 to ensure workspaces reflected a professional workspace. These were depicted as a “ witch hunt” against the fighter pilot culture; General...Welsh countered vehemently, stating certain traditions had no place in today’s Air Force. Nevertheless, discussions regarding witch hunts are still

The Concept of Place and Sense of Place In Architectural Studies

OpenAIRE

Mina Najafi; Mustafa Kamal Bin Mohd Shariff

2011-01-01

Place is a where dimension formed by people-s relationship with physical settings, individual and group activities, and meanings. 'Place Attachment', 'Place Identity'and 'Sense of Place' are some concepts that could describe the quality of people-s relationships with a place. The concept of Sense of place is used in studying human-place bonding, attachment and place meaning. Sense of Place usually is defined as an overarching impression encompassing the general ways in wh...

Risk assessment of chronic stress at work place and work environment of persons occupationally exposed to ionizing radiation at work

International Nuclear Information System (INIS)

Milanovic, S.; Ilic, Z.; Spasojevic-Tisma, V.; Milanovic, S.)

2007-01-01

Interactions of factors at work and worker's health have been analyzed through indicators of chronic professional stress. The examinees have been persons working with sealed sources of radiation with various professional risks among which we have stressed exposure to different radiation doses. Health professionals (medical doctors, radiologist, technicians) working in radio diagnostic and radiotherapy of oncology deceases have been examined. It was concluded that examinees among the subgroup 'therapy' has higher values of stress indicators expressed through all examined indicators: work motivation, personal opinion of work load, behavioral dysfunctions (smoking, alcoholism, drug abuse), increase incidence of health dysfunctions and general neuroticism of examinees. Obtained results are values for which statistical significant have not been established, so they have certain theoretical and practical importance in the frame research with descriptive nature [sr

Incremental Learning for Place Recognition in Dynamic Environments

OpenAIRE

Luo, Jie; Pronobis, Andrzej; Caputo, Barbara; Jensfelt, Patric

2007-01-01

This paper proposes a discriminative approach to template-based Vision-based place recognition is a desirable feature for an autonomous mobile system. In order to work in realistic scenarios, visual recognition algorithms should be adaptive, i.e. should be able to learn from experience and adapt continuously to changes in the environment. This paper presents a discriminative incremental learning approach to place recognition. We use a recently introduced version of the incremental SVM, which ...

Spirit of place: Bridging the 'epistemological gap'

Science.gov (United States)

Dudley, Nickola B. N.

My work explores the psychological gap between humans and nature. Also how humanity is a parcel of nature and that the philosophy of spirit of place can create oneness through imagery, describing the landscape while also encompassing the 'larger frame' within the aesthetic. These transcendental moments connect with not only the landscape but to earth as a spiritual entity. My work is a response to the landscape and these moments.

Project 'European Research Center for Air Pollution Abatement Measures'

International Nuclear Information System (INIS)

1985-04-01

During the 5-7th of March 1985 the first status report of the project 'European Research Center for Air Pollution Control Measures' took place in the Nuclear Research Center, Karlsruhe. Progress reports on the following topics assessment and analysis of the impacts of airborne pollutants on forest trees; distinction from other potential causes of recent forest dieback, research into atmospheric dispersion, conversion and deposition of airborne pollutants, development and optimization of industrial-technical processes to reduce or avoid emissions and providing instruments and making recommendations to the industrial and political sectors were presented. This volume is a collection of the work reported there. 42 papers were entered separately. (orig./MG) [de

Development of wireless intercom for work of excessive noisy places

International Nuclear Information System (INIS)

Shiba, Kazuo; Yamashita, Shinichi; Fujita, Tsuneaki; Yamazaki, Katsuyoshi; Sakai, Manabu; Nakanishi, Tomokazu.

1996-01-01

Nuclear power stations are often excessively noisy working environments, where conversation and verbal communication are hampered to the extreme. We have developed a small wireless intercom for this and other extremely noisy environments. In the first step of this study, we studied work environment noise and vibration. Results formed the basis of intercom system development. In addition, we have examined the possibilities of optical and microwave intercom systems. (author)

Clean Air and Water

Centers for Disease Control (CDC) Podcasts

The air we breathe and the water we drink are both vital components of our health. Nevertheless, bacteria, pollutants, and other contaminates can alter life-giving air and water into health-threatening hazards. Learn about how scientists at the Centers for Disease Control and Prevention work to protect the public from air and water-related health risks.

The influence of the working conditions on the equilibrium factor F and the unattached fraction fp

International Nuclear Information System (INIS)

Streil, T.; Reichert, A.

1998-01-01

The influence is reported of working conditions on dose estimation, in particular the equilibrium factor and the unattached fraction. For instance in a cabinet-maker's shop the radon concentration is strongly influenced by the ventilation system. The F factor is affected by dust producing work processes. For a better knowledge of radon dosimetry, the unattached fraction of radon progeny has to be measured continuously and separately. Preliminary results are presented obtained with a monitor containing three alpha detector microsystems measuring radon in the air, attached radon daughters and unattached radon daughters. The system was tested in buildings, caves, mines, waterworks and other places

Place attachment, place identity and aesthetic appraisal of urban landscape

Directory of Open Access Journals (Sweden)

Jaśkiewicz Michał

2015-12-01

Full Text Available As the aesthetic of the Polish cities became a topic of wider discussions, it is important to detect the potential role of human-place relations. Two studies (N = 185 & N = 196 were conducted to explore the relationship between place attachment, place identity and appraisal of urban landscape. Satisfaction with urban aesthetic was predicted by two dimensions of place attachment (place inherited and place discovered, local identity (on the trend level and national-conservative identity. Place discovered and European identity were also predictors of visual pollution sensitivity. Place discovered is considered as more active type of attachment that permits both a positive bias concerning the aesthetics of one’s city, and a stronger criticism of the elements that can potentially violate the place’s landscape.

Physical nuisances at work place; Nuisances physiques au travail

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This file give a general survey of the different factors that constitute the environment of workers and that can have repercussion on the working conditions on health of exposed personnel: noise, vibration, electricity, radiations, temperature and extreme pressures. (N.C.)

Place, Non-Place, Multi-Place and the (NonPossibilities of Identity: Philosophical, Social, and Communicational Aspects

Directory of Open Access Journals (Sweden)

Basia Nikiforova

2016-09-01

Full Text Available Michel Foucault in the text “Of Other Spaces: Utopias and Heterotopias” wrote that “the present epoch will perhaps be above all the epoch of space”. Space, place, and territories are social productions. Territory is a polysemic concept. Place is “events” created by territories, fluid areas of control produced by territorial negotiation (horizontal dynamics and negotiations between places (vertical dynamics. Space produces places and is produced by places. Moreover, space, place and territories can be seen as the waves of territorialization and deterritorialization in an endless process. It is a form of seizure in the world, an a priori for Immanuel Kant, an ontological need for Martin Heidegger. Territory is a space, governed by a set of rules, named “code”. Territorialization is then synonymous of a certain codification, or the symbolical organization of space. Places are created by territorializational dynamics. They are the sum of “events”. The place and its territory is not “natural”, but it is a cultural artifact, a social product linked to desire, power and identity. The changes of the functions of places (what Foucault called heterotopy are an important subject of contemporary studies. There are also many new temporary uses of these spaces and different emerging functions, including new forms of control, access, surveillance, new forms of openness and closeness (passwords, access profiles, etc.. Informational territory creates new heterotopias, new functions for places and a redefinition of social and communicational practices. It is not the end of a concrete place and its territory, but rather, a new meaning, sense, and a function for these spaces. The contemporary meaning of place and space has a visible tendency in creating ambivalence of sacrum and profanum, which means the secularization of the sacred and the sacralization of the secular. One of the sides of this tendency is sacralizing market and marketing

Place Branding

DEFF Research Database (Denmark)

Medway, Dominic; Swanson, Kathryn; Neirotti, Lisa Delpy

2015-01-01

Purpose: – The purpose of this paper is to report on a special session entitled “Place branding: Are we wasting our time?”, held at the American Marketing Association’s Summer Marketing Educators’ conference in 2014. Design/methodology/approach: – The report details the outcome of an Oxford......: – The outcome of the debate points towards a need for place brands to develop as more inclusive and organic entities, in which case it may be best for place practitioners to avoid creating and imposing a place brand and instead help shape it from the views of stakeholder constituencies. This shifts the notion...... of place branding towards an activity centred on “curation”. Originality/value: – The use of a competitive debating format as a means for exploring academic ideas and concepts in the place management field....

The effect of air velocity on heat stress at increased air temperature

DEFF Research Database (Denmark)

Bjerg, B.; Wang, Xiaoshuai; Zhang, Guoqiang

Increased air velocity is a frequently used method to reduce heat stress of farm animals housed in warm conditions. The main reason why the method works is that higher air velocity increases the convective heat release from the animals. Convective heat release from the animals is strongly related...... to the temperature difference between the surfaces of animals and the surrounding air, and this temperature difference declines when the air temperature approaches the animal body temperature. Consequently it can it by expected that the effect of air velocity decreases at increased air temperature. The literature...... on farm animals in warm conditions includes several thermal indices which incorporate the effect of air velocities. But, surprisingly none of them predicts a decreased influence of air velocity when the air temperature approaches the animal body temperature. This study reviewed published investigations...

Human Perception, SBS Sympsoms and Performance of Office Work during Exposure to Air Polluted by Building Materials and Personal Computers

DEFF Research Database (Denmark)

Bako-Biro, Zsolt

The present thesis deals with the impact of polluted air from building materials and personal computers on human perception, Sick Building Syndrome (SBS) symptoms and performance of office work. These effects have been studies in a series of experiments that are described in two different chapters...

An investigation on the supersonic ejectors working with mixture of air and steam

International Nuclear Information System (INIS)

Shafaee, Maziar; Tavakol, Mohsen; Riazi, Rouzbeh; Sharifi, Navid

2015-01-01

This study evaluated the performance of an ejector using two streams of fluids as suction flow. Three motive flow pressures were considered when investigating ejector performance; the suction flow pressure was assumed to be constant. The suction flow consisted of a mixture of air and steam and the mass fraction of air in this mixture varied from 0 to 1. The ejector performance curves were analyzed for different mass fractions of air. The results indicate that variation of the mass fraction of air in the suction flow mixture had a significant effect on ejector performance. At all motive flow pressures, the ejector entertainment ratio increased as the mass fraction of air in the suction flow increased. The results also show that the sensitivity of ejector performance to variation in the mass fraction of air in the suction flow decreases at higher motive flow pressures. An increase in motive flow pressure caused the transition from supersonic to subsonic flow to occur at higher ejector discharge pressures

An investigation on the supersonic ejectors working with mixture of air and steam

Energy Technology Data Exchange (ETDEWEB)

Shafaee, Maziar; Tavakol, Mohsen; Riazi, Rouzbeh [University of Tehran, Tehran (Iran, Islamic Republic of); Sharifi, Navid [Amirkabir University of Technology, Tehran (Iran, Islamic Republic of)

2015-11-15

This study evaluated the performance of an ejector using two streams of fluids as suction flow. Three motive flow pressures were considered when investigating ejector performance; the suction flow pressure was assumed to be constant. The suction flow consisted of a mixture of air and steam and the mass fraction of air in this mixture varied from 0 to 1. The ejector performance curves were analyzed for different mass fractions of air. The results indicate that variation of the mass fraction of air in the suction flow mixture had a significant effect on ejector performance. At all motive flow pressures, the ejector entertainment ratio increased as the mass fraction of air in the suction flow increased. The results also show that the sensitivity of ejector performance to variation in the mass fraction of air in the suction flow decreases at higher motive flow pressures. An increase in motive flow pressure caused the transition from supersonic to subsonic flow to occur at higher ejector discharge pressures.

Indoor Air Pollution in Non Ac Passenger Bus

Science.gov (United States)

El Husna, Iksiroh; Unzilatirrizqi, Rizal D. Yan El; Karyanto, Yudi; Sunoko, Henna R.

2018-02-01

Passenger buses have been one of favorite means of transportation in Indonesia due to its affordability and flexibility. Intensity of human activities during the trip in the buses have a potential of causing indoor air pollution (polusi udara dalam ruang; PUDR). The indoor air pollution has an impact of 1000-time bigger than outdoor air pollution (polusi udara luar ruang; PULR) on lung. This study aimed to find out indoor air pollution rate of non air conditioned buses using an approach to biological agent pollutant source. The study applied an analysis restricted to microorganisms persistence as one of the sources of the indoor air pollution. The media were placed in different parts of the non AC buses. This study revealed that fungs were found in the non AC buses. They became contaminants and developed pathogenic bacteria that caused air pollution.

Indoor Air Pollution in Non Ac Passenger Bus

Directory of Open Access Journals (Sweden)

El Husna Iksiroh

2018-01-01

Full Text Available Passenger buses have been one of favorite means of transportation in Indonesia due to its affordability and flexibility. Intensity of human activities during the trip in the buses have a potential of causing indoor air pollution (polusi udara dalam ruang; PUDR. The indoor air pollution has an impact of 1000-time bigger than outdoor air pollution (polusi udara luar ruang; PULR on lung. This study aimed to find out indoor air pollution rate of non air conditioned buses using an approach to biological agent pollutant source. The study applied an analysis restricted to microorganisms persistence as one of the sources of the indoor air pollution. The media were placed in different parts of the non AC buses. This study revealed that fungs were found in the non AC buses. They became contaminants and developed pathogenic bacteria that caused air pollution.

Preliminary study on aluminum-air battery applying disposable soft drink cans and Arabic gum polymer

Science.gov (United States)

Alva, S.; Sundari, R.; Wijaya, H. F.; Majlan, E. H.; Sudaryanto; Arwati, I. G. A.; Sebayang, D.

2017-09-01

This study is in relation to preliminary investigation of aluminium-air battery using disposable soft drink cans as aluminium source for anode. The cathode uses commercial porous carbon sheet to trap oxygen from air. This work applies a commercial cashing to place carbon cathode, electrolyte, Arabic gum polymer, and aluminium anode in a sandwich-like arrangement to form the aluminium-air battery. The Arabic gum as electrolyte polymer membrane protects anode surface from corrosion due to aluminium oxide formation. The study result shows that the battery discharge test using constant current loading of 0.25 mA yields battery capacity of 0.437 mAh with over 100 minute battery life times at 4M NaOH electrolyte and 20 % Arabic gum polymer as the best performance in this investigation. This study gives significant advantage in association with beneficiation of disposable soft drink cans from municipal solid waste as aluminium source for battery anode.

Dioxin in Danish air

Energy Technology Data Exchange (ETDEWEB)

Vikelsoe, J.; Andersen, H.V. [National Environmental Research Inst., Roskilde (Denmark)

2004-09-15

To gain more knowledge about dioxin levels, sources and emissions in Denmark, the Danish government year 2001 initiated the Danish Dioxin Monitoring Program. The program is a series of investigations, comprising soil, compost, percolate, bio-ash, incineration of municipal and hazardous waste, deposition, air, lake and fjord sediment as well as cows milk and human milk. The present paper describes the preliminary results for the continued investigation of air. Deposition of dioxin over land or sea is of major importance for the human exposure, which takes place mainly from food intake. The dioxin are emitted mainly to the atmosphere, therefore air measurements are well suited for tracking the transport and fate of dioxin from sources to exposure. Whereas measurements from chimneys has been frequently used to estimate the industrial emission from point sources such as incinerators, air measurements also include emission from diffuse sources such as larger urban or industrial regions, residential quarters, and from evaporation. Furthermore, emission measurements must be done on known sources, whereas air measurements include contribution from unknown source. The major drawbacks of air measurements are the long duration required (years), and the results depends on meteorological conditions, such as temperature, rainfall, wind speed and direction. The purpose of the present study has been to measure dioxins in Danish air, emphasizing - background concentrations and annual variation - difference between urban, rural and residential zones - influence from local sources and long range transport - connection between dioxin in air and deposition.

PLACES OF WORSHIP. Space and religion in Lisbon suburban configurations

OpenAIRE

Guarda, I.; Guerreiro, R.; Heitor, T.

2017-01-01

The emergence of new religious movements is a global phenomenon. Although becoming subject of inquiry by recent academic works concerned with new spiritual content and practices, the places of worship persist an overlooked subject. The aim of this research is to understand the implications of spatiality in the constitution of the new places of worship within Lisbon suburbs after the 1970’s. It analyses the relationship between place centralities and new spatial cultures and urbanities in subu...

Testing and operation of nuclear air-cleaning systems in Qinshan NPP

International Nuclear Information System (INIS)

Yang Lin

1993-01-01

The components of nuclear air-cleaning system, system function, operational mode and the performance of cleaning components in Qinshan Nuclear Power Plant are described. The items, purpose, methods and results of in-place testing after the installation are also described in detail. The in-place testing verifies that nuclear air-cleaning systems in Qinshan Nuclear Power Plant are reliable and high effective. It also describes the points of the operational management. It is shown that the good operational management is the key which developed prescription function of nuclear air-cleaning systems. At present, Qinshan Nuclear Power Plant will be in full power, the normal operation of the system is satisfied with the demand of safe operation in Qinshan Nuclear Power Company

COMPARATIVE EFFICACY OF LONG-TERM ANTIHYPERTENSIVE MONOTHERAPY IN PATIENTS WITH ARTERIAL HYPERTENSION AT THE WORK PLACE

Directory of Open Access Journals (Sweden)

О. N. Antropova

2008-01-01

Full Text Available Aim. To compare effects of 12-month monotherapy with nebivolol, enalapril and indapamide on blood pressure (BP, left ventricular hypertrophy and quality of life in the locomotive engineers and their assistants with stress-associated hypertension at the work place (HTwp.Material and methods. 96 locomotive engineers (20- 53 y.o and their assistants with HTwp were observed. The patients were randomized to receive nebivolol (1 group, enalapril (2 group or indapamide (3 group. 24-hour BP monitoring, echocardiography and quality of life interview with SF–36 questionnaire were performed at the start and after 12 months of the treatment.Results. Long-term therapy lead to achievement of target BP level, improved quality of life and reduced in left ventricular hypertrophy in patients with HTwp. Nebivolol reduced systolic “BP load” more significantly than indapamide did, exerted favorable influence on circadian BP rhythm and reduced heart rate. Monotherapy with nebivolol showed benefits in effect on quality of life.Conclusion. Nebivolol has some advantages in comparison with indapamide and enalapril in antihypertensive therapy of patients with stress-associated HT.

Increasing work-place healthiness with the probiotic Lactobacillus reuteri: A randomised, double-blind placebo-controlled study

Directory of Open Access Journals (Sweden)

Stan Vlaicu

2005-11-01

Full Text Available Abstract Background Short term illnesses, usually caused by respiratory or gastrointestinal diseases are disruptive to productivity and there is relatively little focus on preventative measures. This study examined the effect of the probiotic Lactobacillus reuteri protectis (ATCC55730 on its ability to improve work-place healthiness by reducing short term sick-leave caused by respiratory or gastrointestinal infections. Methods 262 employees at TetraPak in Sweden (day-workers and three-shift-workers that were healthy at study start were randomised in a double-blind fashion to receive either a daily dose of 108 Colony Forming Units of L. reuteri or placebo for 80 days. The study products were administered with a drinking straw. 181 subjects complied with the study protocol, 94 were randomised to receive L. reuteri and 87 received placebo. Results In the placebo group 26.4% reported sick-leave for the defined causes during the study as compared with 10.6% in the L. reuteri group (p L. reuteri group (p L. reuteri group(p

The use of biomonitors and neutron activation analysis in the study of air pollution of Buenos Aires city

International Nuclear Information System (INIS)

Pla, R.R.; Moreno, M.A.; Adler, M.

2000-01-01

Biomonitors were used as part of a pollution study of Buenos Aires city atmosphere under the International Atomic Energy Agency Research Contract ARG 7251, from the Co-ordinated Research Programme on Applied Research on Air Pollution using Nuclear Related Analytical Techniques. Lichens were primarily selected as indicators. Two different approaches were conducted, direct sampling of Parmotrema reticulatum, at a few places and the use of lichen bags, filled with Usnea sulcata from a northern national park, and hung at different sites. Simultaneously, tree bark was tried as biomonitor. Platanus acerifolia and Melia azedarach were selected as candidates, for being the most common trees in the city, but only P. acerifolia was analyzed. All the samples were analyzed using instrumental neutron activation analysis at the Ezeiza Atomic Centre of the National Atomic Energy Commission. RA-3) reactor was used for the irradiations, determining: As, Ba, Br, Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Na, Rb, Sb, Sc, Sm, Ta, Tb, Th, U, Yb and Zn. Concentration values for P. reticulatum compared well with values from literature. For U. sulcata differences were found among the tested sites and also, for some elements an increasing trend with time was observed. Enrichment factors calculated using Sc as reference and Mason's crustal average concentrations showed vehicules and refuse incineration as contributing sources to the aerosol. Tree bark from Buenos Aires and from a smaller city with mainly agricultural activities were analyzed and the results are coincident with those from lichens. This work is the first and preliminar contribution to the study of Buenos Aires aerosol using biomonitors. (author)

Children's Places

DEFF Research Database (Denmark)

Using a cross-cultural approach the book investigates children's places in different societies. "Children's Places" examines the ways in which children and adults, from their different vantage-points in society, negotiate proper places of children in both social and spatial terms. It looks at some...

EXECUTIVE SECRETARY: STRESS AND EMOTIONS AT THE WORK PLACE

Directory of Open Access Journals (Sweden)

Cibele Cristina Ortega

2011-10-01

Full Text Available This work showed a clear and including vision how the executive secretary coexists with the stress excess in the work without getting sick physically and psychologically. It was presented definitions for terms like stress, emotion and psychosomatic. Moreover, it was emphasized the most common psychosomatic´s diseases in the organization scope, such as, Depression, Syndrome of Panic and Syndrome of Burnot. For more reality and veracity, it was done a research to verify the stress levels of the executive secretaries and how they deal with pressure and requirements from the modern world without acquiring diseases. With the research´s result it was possible identify some points that can help the professional to have a physical and mental life healthful. Also, the company and immediate bosses can contribute for the well-being of their employees. Finally, it was available some suggestions so that the stress excess does not harm the social and professional life of the executive secretary.

Gold work function reduction by 2.2 eV with an air-stable molecular donor layer

Energy Technology Data Exchange (ETDEWEB)

Broeker, Benjamin; Blum, Ralf-Peter; Frisch, Johannes; Rabe, Juergen P.; Koch, Norbert [Institut fuer Physik, Humboldt-Universitaet zu Berlin (Germany); Vollmer, Antje [Berliner Elektronenspeicherring-Gesellschaft fuer Synchrotronstrahlung mbH, Berlin (Germany); Hofmann, Oliver T.; Zojer, Egbert [Institut of Solid State Physics, Graz University of Technology (Austria); Rieger, Ralph; Muellen, Klaus [Max Planck Institut fuer Polymerforschung, Mainz (Germany)

2009-07-01

Ultraviolet photoelectron spectroscopy was used to investigate neutral methyl viologen (1,1'-dimethyl-1H,1'H-[4,4']bipyridinylidene, MV0) deposited on Au(111) surfaces. As a result of molecule-to-metal electron transfer, the work function of Au(111) was decreased from 5.5 eV to 3.3 eV. The energy levels of electron transport layers deposited on top of modified Au surfaces were shifted to higher binding energy compared to layers on pristine Au, and the electron injection barrier was reduced by 0.8 eV for tris(8-hydroxyquinoline)aluminum (Alq3) and by 0.7 eV for C60. The air-stable donor MV0 can thus be used to facilitate electron injection into organic semiconductors even from high work function metals.

Compressibility of air in fibrous materials

DEFF Research Database (Denmark)

Tarnow, Viggo

1996-01-01

The dynamic compressibility of air in fibrous materials has been computed for two assumed configurations of fibers which are close to the geometry of real fiber materials. Models with parallel cylinders placed in a regular square lattice and placed randomly are treated. For these models...... the compressibility is computed approximately from the diameter and mean distances between cylinders. This requires calculation of the air temperature, which is calculated for cylinders in a regular lattive by the Wigner-Seitz cell approximation. In the case of random placement, the calculation is done by a summation...... over thermal waves from all fibers, and by a self-consistent procedure. Figuren of the compressibility in the frequency range 10-100 000 Hz, are given for diameter of the cylinders of 6.8 µm, and mean distances between them from 50 to 110 µm, which corresponds to glass wool with a density of 40 to 16...

Aspects of water and air ingress accidents in HTRs

International Nuclear Information System (INIS)

Wolters, J.

1981-01-01

The work has contributed towards improving the understanding of the processes taking place during water and air ingress accidents. The favourable design features of the THTR limit the pressure build-up in the primary circuit to values below critical values in water ingress accidents even when the source of water is not identified and shut-off. A pressure reduction by safety valves is in this case not necessary so that the accident consequences remain confined in the primary circuit. The expected air ingress rates following a depressurization accident through an opening in the top head of the PCRV are extremely small in the case of complete integration of the primary circuit in the PCRV. The chemical processes in the primary circuit remain so limited that no danger for the fuel elements and the containment exists. The often feared ''graphite fire'' can be excluded even in the case when the circulators of the after-heat removal systems take in a high percentage of containment atmosphere. The core is cooled down safely

Thin Places

OpenAIRE

Lockwood, Sandra Elizabeth

2013-01-01

This inquiry into the three great quests of the twentieth century–the South Pole, Mount Everest, and the Moon–examines our motivations to venture into these sublime, yet life-taking places. The Thin Place was once the destination of the religious pilgrim seeking transcendence in an extreme environment. In our age, the Thin Place quest has morphed into a challenge to evolve beyond the confines of our own physiology; through human ingenuity and invention, we reach places not meant to accommod...

Cognitive process modelling of controllers in en route air traffic control.

Science.gov (United States)

Inoue, Satoru; Furuta, Kazuo; Nakata, Keiichi; Kanno, Taro; Aoyama, Hisae; Brown, Mark

2012-01-01

In recent years, various efforts have been made in air traffic control (ATC) to maintain traffic safety and efficiency in the face of increasing air traffic demands. ATC is a complex process that depends to a large degree on human capabilities, and so understanding how controllers carry out their tasks is an important issue in the design and development of ATC systems. In particular, the human factor is considered to be a serious problem in ATC safety and has been identified as a causal factor in both major and minor incidents. There is, therefore, a need to analyse the mechanisms by which errors occur due to complex factors and to develop systems that can deal with these errors. From the cognitive process perspective, it is essential that system developers have an understanding of the more complex working processes that involve the cooperative work of multiple controllers. Distributed cognition is a methodological framework for analysing cognitive processes that span multiple actors mediated by technology. In this research, we attempt to analyse and model interactions that take place in en route ATC systems based on distributed cognition. We examine the functional problems in an ATC system from a human factors perspective, and conclude by identifying certain measures by which to address these problems. This research focuses on the analysis of air traffic controllers' tasks for en route ATC and modelling controllers' cognitive processes. This research focuses on an experimental study to gain a better understanding of controllers' cognitive processes in air traffic control. We conducted ethnographic observations and then analysed the data to develop a model of controllers' cognitive process. This analysis revealed that strategic routines are applicable to decision making.

Place-Identity in a School Setting: Effects of the Place Image

Science.gov (United States)

Marcouyeux, Aurore; Fleury-Bahi, Ghozlane

2011-01-01

Studies on place identity show positive relationships between the evaluation of a place and mechanisms involved in place identification. However, individuals also identify with places of low social prestige (places that bear a negative social image). Few authors investigate the nature of place identity processes in this case. The goal of this…

Health effects of air quality regulations in Delhi, India

Science.gov (United States)

Foster, Andrew; Kumar, Naresh

2011-03-01

This, the first systematic study, quantifies the health effects of air quality regulations in Delhi, which adopted radical measures to improve air quality, including, for example, the conversion of all commercial vehicles to compressed natural gas (CNG), and the closure of polluting industries in residential areas from 2000 to 2002. Air pollution data, collected at 113 sites (spread across Delhi and its neighboring areas) from July-December 2003, were used to compute exposure at the place of residence of 3989 subjects. A socio-economic and respiratory health survey was administered in 1576 households. This survey collected time-use, residence histories, demographic information, and direct measurements of lung function with subjects. The optimal interpolation methods were used to link air pollution and respiratory health data at the place of their residence. Resident histories, in combination with secondary data, were used to impute cumulative exposure prior to the air-quality interventions, and the effects of recent air quality measures on lung function were then evaluated. Three important findings emerge from the analysis. First, the interventions were associated with a significant improvement in respiratory health. Second, the effect of these interventions varied significantly by gender and income. Third, consistent with a causal interpretation of these results, effects were the strongest among those individuals who spend a disproportionate share of their time out-of-doors.

Development of the GEM-MACH-FireWork System: An Air Quality Model with On-line Wildfire Emissions within the Canadian Operational Air Quality Forecast System

Science.gov (United States)

Pavlovic, Radenko; Chen, Jack; Beaulieu, Paul-Andre; Anselmp, David; Gravel, Sylvie; Moran, Mike; Menard, Sylvain; Davignon, Didier

2014-05-01

A wildfire emissions processing system has been developed to incorporate near-real-time emissions from wildfires and large prescribed burns into Environment Canada's real-time GEM-MACH air quality (AQ) forecast system. Since the GEM-MACH forecast domain covers Canada and most of the U.S.A., including Alaska, fire location information is needed for both of these large countries. During AQ model runs, emissions from individual fire sources are injected into elevated model layers based on plume-rise calculations and then transport and chemistry calculations are performed. This "on the fly" approach to the insertion of the fire emissions provides flexibility and efficiency since on-line meteorology is used and computational overhead in emissions pre-processing is reduced. GEM-MACH-FireWork, an experimental wildfire version of GEM-MACH, was run in real-time mode for the summers of 2012 and 2013 in parallel with the normal operational version. 48-hour forecasts were generated every 12 hours (at 00 and 12 UTC). Noticeable improvements in the AQ forecasts for PM2.5 were seen in numerous regions where fire activity was high. Case studies evaluating model performance for specific regions and computed objective scores will be included in this presentation. Using the lessons learned from the last two summers, Environment Canada will continue to work towards the goal of incorporating near-real-time intermittent wildfire emissions into the operational air quality forecast system.

Can air pollutant controls change global warming?

International Nuclear Information System (INIS)

Strefler, Jessica; Luderer, Gunnar; Kriegler, Elmar; Meinshausen, Malte

2014-01-01

Highlights: • Air pollution policies do not affect long-term climate targets. • Reduction of aerosols counteracts a fraction of the reduction of Kyoto forcing. • Air pollution policies may affect the rate of climate change in the short term. • There is no tradeoff between clean air and climate policies. - Abstract: In this paper we analyze the interaction between climate and air pollution policies using the integrated assessment model REMIND coupled to the reduced-form climate model MAGICC. Since overall, aerosols tend to cool the atmosphere, there is a concern that a reduction of pollutant emissions could accelerate global warming and offset the climate benefits of carbon dioxide emission reductions. We investigate scenarios which independently reduce emissions from either large-scale sources, such as power plants, or small-scale sources, such as cooking and heating stoves. Large-scale sources are likely to be easier to control, but their aerosol emissions are characterized by a relatively high sulfur content, which tends to result in atmospheric cooling. Pollution from small-scale sources, by contrast, is characterized by a high share of carbonaceous aerosol, which is an important contributor to global warming. We find that air pollution policies can significantly reduce aerosol emissions when no climate policies are in place. Stringent climate policies lead to a large reduction of fossil fuel use, and therefore result in a concurrent reduction of air pollutant emissions. These reductions partly reduce aerosol masking, thus initially counteracting the reduction of greenhouse gas forcing, however not overcompensating it. If climate policies are in place, air pollution policies have almost no impacts on medium- and long-term radiative forcing. Therefore there is no conflict of objectives between clean air and limiting global warming. We find that the stringency of air pollution policies may influence the rate of global temperature change in the first decade

My Place Is Not Your Place

DEFF Research Database (Denmark)

Zenker, Sebastian; Beckmann, Suzanne C.

2013-01-01

Purpose – Cities increasingly compete with each other for attracting tourists, investors, companies, or residents. Marketers therefore focus on establishing the city as a brand, disregarding that the perception and knowledge of a city differ dramatically between the target audiences. Hence, place...... branding should emphasize much more the perceptions of the different target groups and develop strategies for advanced place brand management. The aim of this paper is to assess the important discrepancies between the city brand perceptions of different target groups with the help of network analysis......-ended-question survey with 334 participants. Findings – Structural differences for the city brand perceptions of two different target groups and the differences between perceptions of an external and internal target group are highlighted. The results and the managerial implications for place marketers are discussed...

Doing Cultural Work: Local Postcard Production and Place Identity in a Rural Shire

Science.gov (United States)

Mayes, Robyn

2010-01-01

Studies of place construction in the rural studies literature have largely privileged the role of professionals over that of local lay actors. This paper contributes to redressing this imbalance through a critical case-study of lay postcard production in a rural shire. Drawing on original, qualitative research conducted in the Shire of…

Air alpha monitoring device and system for the calibration of the track detectors

International Nuclear Information System (INIS)

Danis, A; Oncescu, M.; Ciubotariu, M.

2001-01-01

The radon measurement plays a critical role: - in monitoring the human health and safety, due to radon destructive health effects. Sustained exposures of humans to high concentration of radon, in fact to high concentrations of its decay products, can produce lung cancer; - in a variety of geophysical, geochemical, hydrological and atmospheric investigations, such as exploring resources of uranium or hydrocarbons. The transport of radon within the earth, waters and atmosphere makes it a useful tracer in these purposes. in both cases, the reliable long-term measurements are required because usual short-term variations in concentration need to be averaged. These variations are caused by factors such as relative humidity, temperature, atmospheric pressure and their seasonal variations, moisture content in the air, or ventilation in the dwelling or working places. The integrating measurement methods meet these requirements. Among them, the alpha track method is one of the adequate and useful method and it is used by authors in radon measurements in dwelling and working places including mines and house cellars. The best etched track alpha detector for radon measurements proved to be the detector CR-39 due to: - its sensitivity to alpha particles emitted by radon decay products; - its stability against various environmental factors; - its high degree of optical clarity, was used in a proper device for alpha monitoring in air. Its calibration for radon measurements was performed in the proper calibration system. The general descriptions and specifications were given previously. Only some characteristics of these devices are given here. For air alpha monitoring device: i) equipped with filter, during alpha exposure, the alpha particles of radon are registered in the etched track detector mounted inside (ρ Rn - track density); ii) without filter, the alpha particles emitted by radon + its alpha decay products/their aerosols are registered in the detector (ρ tot - track

Indoor air humidity, air quality, and health - An overview.

Science.gov (United States)

Wolkoff, Peder

2018-04-01

There is a long-standing dispute about indoor air humidity and perceived indoor air quality (IAQ) and associated health effects. Complaints about sensory irritation in eyes and upper airways are generally among top-two symptoms together with the perception "dry air" in office environments. This calls for an integrated analysis of indoor air humidity and eye and airway health effects. This overview has reviewed the literature about the effects of extended exposure to low humidity on perceived IAQ, sensory irritation symptoms in eyes and airways, work performance, sleep quality, virus survival, and voice disruption. Elevation of the indoor air humidity may positively impact perceived IAQ, eye symptomatology, and possibly work performance in the office environment; however, mice inhalation studies do not show exacerbation of sensory irritation in the airways by low humidity. Elevated humidified indoor air appears to reduce nasal symptoms in patients suffering from obstructive apnea syndrome, while no clear improvement on voice production has been identified, except for those with vocal fatigue. Both low and high RH, and perhaps even better absolute humidity (water vapor), favors transmission and survival of influenza virus in many studies, but the relationship between temperature, humidity, and the virus and aerosol dynamics is complex, which in the end depends on the individual virus type and its physical/chemical properties. Dry and humid air perception continues to be reported in offices and in residential areas, despite the IAQ parameter "dry air" (or "wet/humid air") is semantically misleading, because a sensory organ for humidity is non-existing in humans. This IAQ parameter appears to reflect different perceptions among other odor, dustiness, and possibly exacerbated by desiccation effect of low air humidity. It is salient to distinguish between indoor air humidity (relative or absolute) near the breathing and ocular zone and phenomena caused by moisture

Place learning overrides innate behaviors in Drosophila.

Science.gov (United States)

Baggett, Vincent; Mishra, Aditi; Kehrer, Abigail L; Robinson, Abbey O; Shaw, Paul; Zars, Troy

2018-03-01

Animals in a natural environment confront many sensory cues. Some of these cues bias behavioral decisions independent of experience, and action selection can reveal a stimulus-response (S-R) connection. However, in a changing environment it would be a benefit for an animal to update behavioral action selection based on experience, and learning might modify even strong S-R relationships. How animals use learning to modify S-R relationships is a largely open question. Three sensory stimuli, air, light, and gravity sources were presented to individual Drosophila melanogaster in both naïve and place conditioning situations. Flies were tested for a potential modification of the S-R relationships of anemotaxis, phototaxis, and negative gravitaxis by a contingency that associated place with high temperature. With two stimuli, significant S-R relationships were abandoned when the cue was in conflict with the place learning contingency. The role of the dunce ( dnc ) cAMP-phosphodiesterase and the rutabaga ( rut ) adenylyl cyclase were examined in all conditions. Both dnc 1 and rut 2080 mutant flies failed to display significant S-R relationships with two attractive cues, and have characteristically lower conditioning scores under most conditions. Thus, learning can have profound effects on separate native S-R relationships in multiple contexts, and mutation of the dnc and rut genes reveal complex effects on behavior. © 2018 Baggett et al.; Published by Cold Spring Harbor Laboratory Press.

Consumer views about aging-in-place

Directory of Open Access Journals (Sweden)

Grimmer K

2015-11-01

Full Text Available Karen Grimmer, Debra Kay, Jan Foot, Khushnum PastakiaInternational Center for Allied Health Evidence, Sansom Institute, City East Campus, University of South Australia, Adelaide, SA, AustraliaBackground: Supporting older people’s choices to live safely and independently in the community (age-in-place can maximize their quality of life and minimize unnecessary hospitalizations and residential care placement. Little is known of the views of older people about the aging-in-place process, and how they approach and prioritize the support they require to live in the community accommodation of their choice.Purpose: To explore and synthesize the experiences and perspectives of older people planning for and experiencing aging-in-place.Methods: Two purposively sampled groups of community-dwelling people aged 65+ years were recruited for individual interviews or focus groups. The interviews were semistructured, audio-recorded, and transcribed. Themes were identified by three researchers working independently, then in consort, using a qualitative thematic analysis approach.Results: Forty-two participants provided a range of insights about, and strategies for, aging-in-place. Thematic saturation was reached before the final interviews. We identified personal characteristics (resilience, adaptability, and independence and key elements of successful aging-in-place, summarized in the acronym HIPFACTS: health, information, practical assistance, finance, activity (physical and mental, company (family, friends, neighbors, pets, transport, and safety.Discussion: This paper presents rich, and rarely heard, older people’s views about how they and their peers perceive, characterize, and address changes in their capacity to live independently and safely in the community. Participants identified relatively simple, low-cost, and effective supports to enable them to adapt to change, while retaining independence and resilience. The findings highlighted how successful

[Myocardial infarction and stress at work place and in the family: 10-year risk of development in an open population of 2564 year old men (epidemiological study in a framework of the WHO program MONICA-PSYCHOSOCIAL)].

Science.gov (United States)

Gafarov, V V; Gromova, E A; Gafarova, A V; Gagulin, I V

2011-01-01

With the aim of assessment of 10 year risk of myocardial infarction (MI) development in men in dependence on stress at work place and in the family in a framework of the WHO program "MONICA-PSYCHOSOCIAL" we examined random representative sample of men (n=657) aged 25-64 years inhabitants of one of districts in Novosibirsk. During 10 years (1994-2004) we registered all cases of MI. For assessment of relative risk of MI development we used COX proportional regression model. Among men with first MI 47.4% had high level of stress in the family and 57.9% were subjected to stress at work place. Five and 10 year risk of MI in men with high test levels of stress at home and work place was 2-5 times greater than in those without. Among men subjected to stress in the family MI risk was the highest at age 55-64 years, while permanent stressful situations at work place were more common in age group 45-54 years. Among men with high levels of stress in the family and at work place higher rate of MI development was observed in widowers, divorced men with incomplete high or elementary education, heavy or moderate manual labor workers, and pensioners. The results indicate that critical life events as well as chronic stressful influences increase risk of MI among men aged 25-64 years. The group of greatest risk - middle and old age persons who are less protected against social, political and economical disbalance in the society.

2004 list of MAK (maximum work place concentration) and BAT (biological workplace tolerance) values; MAK- und BAT-Werte-Liste 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The MAK value (maximum workplace concentration) is the highest permissible concentration of a working material occurring in the ambient air of the workplace as a gas or vapour or in suspended form which according to the present state of knowledge does not, in general, impair the health of or pose an unreasonable molestation (for example through repulsive odour) to employees even in the case of repeated, long-term exposure, that is as a rule 8 hours daily, assuming an average working week of no more than 40 hours. As a rule, MAK values are quoted as average values over a time period of up to one working day or shift. They are primarily defined in consideration of effect characteristics of the substances in question, but also - as far as possible - of the practical conditions attending the work processes or the exposure patterns which they entail. This is done on the basis of scientifically founded criteria of health protection, not on whether providing such protection is technically or economically feasible. In addition, substances are assessed in terms of carcinogenicity, sensitising effects, any contribution to systemic toxicity following cutaneous resorption, hazards for pregnancy and germ cell mutagenicity and are classified or marked accordingly. The Commission's procedures in assessing substances with respect to these criteria are described in corresponding sections of the MAK and BAT list of values, in the ''Toxicological and occupational medical explanations of MAK values'' and in scientific journals.

Improving the Electrical Parameters of a Photovoltaic Panel by Means of an Induced or Forced Air Stream

Directory of Open Access Journals (Sweden)

R. Mazón-Hernández

2013-01-01

Full Text Available The main priority in photovoltaic (PV panels is the production of electricity. The transformation of solar energy into electricity depends on the operating temperature in such a way that the performance increases with the decreasing temperatures. In the existing literature, different cooling techniques can be found. The purpose of most of them is to use air or water as thermal energy carriers. This work is focused on the use of air as a working fluid whose movement is either induced by natural convection or forced by means of a fan. The aim of this study is to characterise the electrical behaviour of the solar panels in order to improve the design of photovoltaic installations placed in roof applications ensuring low operating temperatures which will correct and reverse the effects produced on efficiency by high temperature. To do this, a test installation has been constructed at the Universidad Politécnica de Cartagena in Spain. In this paper, the results of the tests carried out on two identical solar panels are included. One of them has been modified and mounted on different channels through which air flows. The different studies conducted show the effects of the air channel cross-section, the air velocity, and the panel temperature on the electrical parameters of the solar panels, such as the voltage, current, power, and performance. The results conclude that the air space between the photovoltaic panels and a steel roof must be high enough to allow the panel to be cooled and consequently to achieve higher efficiency.

Future's operation areas: new-generation suppression enemy air defence (SEAD) elements

Science.gov (United States)

Hazinedar, Ä.°lker

2015-05-01

Since air vehicles took place in the theater of operations, they have become the indispensable elements and the strongest attack power of armed forces. In the following period, with technological development, supersonic aircrafts took place in the operation area and this increased effectiveness of air vehicles much more. Air forces have used these aircrafts during important missions like strategic attack and air defense operations. On the other hand, decision makers understood that it was not feasible to intercept fighter aircrafts by executing combat air patrol flight missions. Since there is not enough reaction time to intercept the high speed aircrafts, ground stationed Surface to Air Missiles (SAM) system requirement has emerged. Therefore, SAM systems took place in the operation scene as well. Due to the fact that SAM systems emerged against the attack power, the attack aircrafts are to keep away from the fire of the ground stationed SAM systems. Hence, the requirement of Suppression Enemy Air Defense (SEAD) arose. SEAD elements take under suppression the radar of the SAM systems. In this way, attack aircrafts are able to attack without the risk of SAM systems. The purpose of this study is to find new methods or concepts in order to protect friendly attack aircrafts against ground based surface to air missiles' fires. Modernization of SAM systems and new generation SAM system producing activities have proceeded with positive acceleration. So, current SEAD elements and concepts are not able to cover the requirements due to the increased SAM system ranges. According to the concepts, SEAD weapons` ranges must be longer than the SAM weapons' ranges to protect friendly aircrafts. In this study, new concept was offered to overcome the deficiencies of current SEAD concept. The elements of new concepts were put forward. Classic SEAD concept and new generation concepts were assessed by using SWOT analysis technique. As a result, this study has revealed that, air forces

Health risk assessment of migrant workers' exposure to polychlorinated biphenyls in air and dust in an e-waste recycling area in China: Indication for a new wealth gap in environmental rights.

Science.gov (United States)

Wang, Yalin; Hu, Jinxing; Lin, Wei; Wang, Ning; Li, Cheng; Luo, Peng; Hashmi, Muhammad Zaffar; Wang, Wenbo; Su, Xiaomei; Chen, Chen; Liu, Yindong; Huang, Ronglang; Shen, Chaofeng

2016-02-01

Migrant workers who work and live in polluted environment are a special vulnerable group in the accelerating pace of urbanization and industrialization in China. In the electronic waste (e-waste) recycling area, for example, migrant workers' exposure to pollutants, such as PCBs (polychlorinated biphenyls), is the result of an informal e-waste recycling process. A village in an electronic waste recycling area where migrant workers gather was surveyed. The migrant workers' daily routines were simulated according to the three-space transition: work place-on the road-home. Indoor air and dust in the migrant workers' houses and workplaces and the ambient air on the roads were sampled. The PCB levels of the air and dust in the places corresponding to the migrant workers are higher than those for local residents. The migrant workers have health risks from PCBs that are 3.8 times greater than those of local residents. This is not only caused by the exposure at work but also by their activity patterns and the environmental conditions of their dwellings. These results revealed the reason for the health risk difference between the migrant workers and local residents, and it also indicated that lifestyle and economic status are important factors that are often ignored compared to occupational exposure. Copyright © 2015 Elsevier Ltd. All rights reserved.

The sea: place of ultimate freedom? Ethnographic reflection on in-between places and practices

Directory of Open Access Journals (Sweden)

Nataša Rogelja

2015-09-01

Full Text Available As a result of the rapid development of navigation and communication technology, boat building technology, popularity of travel and the sea, increased living standards, mobile work opportunities, as well as recessions and disillusionment with the nation-state system and postindustrial economy, a constantly increasing number of people adopt mobility on the sea as a way of life. The paper explores the connection between sea imaginaries and maritime lifestyle migration, discussing the process by which sea imaginaries are translated into practice but also how the physical maritime environment influences the experience of lifestyle migrants. In doing so, the concept of liminality, as previously tailored to the lifestyle migration literature and initially introduced by Arnold Van Gennep and Victor Turner, will be put in a dialogue with the ethnographic material. First, the paper explains the theoretical foundations of lifestyle migration, emphasizing the relation between the social construction of places and choices of lifestyle migrants, while also introducing the debate on liminality; second, it discusses the importance of these cultural dimensions in the specific ethnographic setting among Westerners in the Mediterranean who live, travel and work on sailing boats. Finally, the sea images, the maritime environment and details from individualized biographies will be put in a dialogue with each other in order to discuss in-between practices and places.

Place-Specific Computing

DEFF Research Database (Denmark)

Messeter, Jörn

2009-01-01

An increased interest in the notion of place has evolved in interaction design based on the proliferation of wireless infrastructures, developments in digital media, and a ‘spatial turn’ in computing. In this article, place-specific computing is suggested as a genre of interaction design that add......An increased interest in the notion of place has evolved in interaction design based on the proliferation of wireless infrastructures, developments in digital media, and a ‘spatial turn’ in computing. In this article, place-specific computing is suggested as a genre of interaction design...... that addresses the shaping of interactions among people, place-specific resources and global socio-technical networks, mediated by digital technology, and influenced by the structuring conditions of place. The theoretical grounding for place-specific computing is located in the meeting between conceptions...... of place in human geography and recent research in interaction design focusing on embodied interaction. Central themes in this grounding revolve around place and its relation to embodiment and practice, as well as the social, cultural and material aspects conditioning the enactment of place. Selected...

Effects of pollution from personal computers on perceived air quality, SBS symptoms and productivity in offices

DEFF Research Database (Denmark)

Bako-Biro, Zsolt; Wargocki, Pawel; Weschler, Charles J.

2004-01-01

In groups of six, 30 female subjects were exposed for 4.8 h in a low-polluting office to each of two conditions the presence or absence of 3-month-old personal computers (PCs). These PCs were placed behind a screen so that they were not visible to the subjects. Throughout the exposure the outdoor...... air supply was maintained at 10 l/s per person. Under each of the two conditions the subjects performed simulated office work using old low-polluting PCs. They also evaluated the air quality and reported Sick Building Syndrome (SBS) symptoms. The PCs were found to be strong indoor pollution sources......, even after they had been in service for 3 months. The sensory pollution load of each PC was 3.4 olf, more than three times the pollution of a standard person. The presence of PCs increased the percentage of people dissatisfied with the perceived air quality from 13 to 41% and increased by 9% the time...

Is There an Association Between Ambient Air Pollution and Bladder Cancer Incidence? Analysis of 15 European Cohorts

DEFF Research Database (Denmark)

Pedersen, Marie; Stafoggia, Massimo; Weinmayr, Gudrun

2016-01-01

Background: Ambient air pollution contains low concentrations of carcinogens implicated in the etiology of urinary bladder cancer (BC). Little is known about whether exposure to air pollution influences BC in the general population. Objective: To evaluate the association between long-term exposure......) with diameter Pollution Effects project...... of information about lifetime exposure. Conclusions: There was no evidence of an association between exposure to outdoor air pollution levels at place of residence and risk of BC. Patient summary: We assessed the link between outdoor air pollution at place of residence and bladder cancer using the largest study...

Evaluating The Operation Of Three Air Cleaners Working Individually In A Clean Room

DEFF Research Database (Denmark)

Ardkapan, Siamak Rahimi; Afshari, Alireza; Bergsøe, Niels Christian

2011-01-01

The use of portable air cleaners is becoming increasingly popular in many countries including Denmark. Portable air cleaners are known for not only removing but also generating particles and gases. To clarify this, three air cleaning technologies were evaluated. They were nonthermal plasma......, photochemical air purifier and corona discharge ionizer. The concentrations of ultrafine particles, ozone and total volatile organic compounds were measured both in a duct and in a clean room. It was found that the studied air cleaning technologies increased the ozone level in the clean room and the duct....... The increase of ozone level in the clean room was more than that was measured in the duct. Additionally, it was found that the number of ultrafine particles in the room increased due to the generated ozone. The number of generated particles changed with the season. The study leads to the recommendation...

Taking place, screening place

DEFF Research Database (Denmark)

Hansen, Kim Toft; Waade, Anne Marit

2019-01-01

We introduce location studies as a new empirical approach to screen studies. Location studies represent an interdisciplinary perspective, including media, aesthetics and geography, and reflect a growing interest in places in a global media and consumption culture. The chapter analyses two recent......) with one being traditional and the other being commercial; both dramas include discussions of localities and social heritage, and both use local sports as a common metaphor for social cohesion; and both series have been partly funded by a local film Danish commissioner. However, The Legacy is shot...... to a large extent in studios, while Norskov is shot entirely on location. The study is based on interviews with producers, broadcasters, location scouts, production designers and writers, as well as quantitative and qualitative textual analyses of television drama series, the geographical places, and related...

Place-based Learning About Climate with Elementary GLOBE

Science.gov (United States)

Hatheway, B.; Gardiner, L. S.; Harte, T.; Stanitski, D.; Taylor, J.

2017-12-01

Place-based education - helping students make connections between themselves, their community, and their local environment - is an important tool to help young learners understand their regional climate and start to learn about climate and environmental change. Elementary GLOBE storybooks and learning activities allow opportunities for place-based education instructional strategies about climate. In particular, two modules in the Elementary GLOBE unit - Seasons and Climate - provide opportunities for students to explore their local climate and environment. The storybooks and activities also make connections to other parts of elementary curriculum, such as arts, geography, and math. Over the long term, place-based education can also encourage students to be stewards of their local environment. A strong sense of place may help students to see themselves as stakeholders in their community and its resilience. In places that are particularly vulnerable to the impacts of climate and environmental change and the economic, social, and environmental tradeoffs of community decisions, helping young students developing a sense of place and to see the connection between Earth science, local community, and their lives can have a lasting impact on how a community evolves for decades to come. Elementary GLOBE was designed to help elementary teachers (i.e., grades K-4) integrate Earth system science topics into their curriculum as they teach literacy skills to students. This suite of instructional materials includes seven modules. Each module contains a science-based storybook and learning activities that support the science content addressed in the storybooks. Elementary GLOBE modules feature air quality, climate, clouds, Earth system, seasons, soil, and water. New eBooks allow students to read stories on computers or tablets, with the option of listening to each story with an audio recording. A new Elementary GLOBE Teacher Implementation Guide, published in 2017, provides

People and Places Forum Workshop Report | Science ...

Science.gov (United States)

In November 2015, the Twin Ports-based People and Places Work Group (PPWG) coordinated a special gathering to bring together researchers and scholars from diverse fields to discuss environment-human research, scholarship and collaboration opportunities. Hosted by the US Environmental Protection Agency (USEPA), the group approached and invited over 150 individuals from eight regional universities. The goals were to learn who was doing or interested in doing applied research on human-environment interactions, who might have students to engage in work, who might partner with the Lake Superior National Estuarine Research Reserve (Reserve), USEPA, University of Minnesota Duluth’s Natural Resource Research Institute (NRRI), Minnesota and Wisconsin Sea Grant Institutes (Sea Grant), and other partnering institutes and who might be interested in ecosystem services work in particular. A pre-gathering survey collected initial information about this community and the adapted, open-space design gathering allowed for even more data collection about potential new colleagues to engage in the work of understanding people and place in our region. This summary reviews some of findings and presents what may be considered the beginning of a network directory to encourage and facilitate interdisciplinary research and collaboration. This report outlines the process to identify and reach out to health, social science, and humanities scholars to participate in environmental research w

The effect of low ventilation rate with elevated bioeffluent concentration on work performance, perceived indoor air quality, and health symptoms.

Science.gov (United States)

Maula, H; Hongisto, V; Naatula, V; Haapakangas, A; Koskela, H

2017-11-01

The aim of this laboratory experiment was to study the effects of ventilation rate, and related changes in air quality, predominantly bioeffluents, on work performance, perceived indoor air quality, and health symptoms in a typical conditions of modern open-plan office with low material and equipment emissions. In Condition A, outdoor air flow rate of 28.2 l/s person (CO 2 level 540 ppm) was applied and in Condition B, outdoor air flow rate was 2.3 l/s person (CO 2 level 2260 ppm). CO 2 concentration level was used as an indicator of bioeffluents. Performance was measured with seven different tasks which measure different cognitive processes. Thirty-six subjects participated in the experiment. The exposure time was 4 hours. Condition B had a weak negative effect on performance only in the information retrieval tasks. Condition B increased slightly subjective workload and perceived fatigue. No effects on health symptoms were found. The intensity of symptoms was low in both conditions. The experimental condition had an effect on perceived air quality and observed odor intensity only in the beginning of the session. Although the room temperature was controlled in both conditions, the heat was perceived to impair the performance more in Condition B. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Influence of trees and shrubs on microclimate and sanitary state of air layers close to the ground surface at industrial sites of metallurgical works

Energy Technology Data Exchange (ETDEWEB)

Reva, M L; Filatova, R Ya

1976-01-01

The effect of trees and shrubs on working conditions was investigated at metallurgical works in the Ukraine. Indices used included air temperature and humidity, sulfuric anhydride, carbon monoxide and nitrogen oxide content. Indices were measured at varying distances from the sources of the industrial waste. In areas with trees and shrubs, air temperature was 3 to 5 degrees lower and relative humidity 8 to 10 degrees higher than out in the open. The level of industrial waste given off as gas was consistently less prevalent in areas with trees and shrubs than out in the open. Trees and shrubs were concluded to be essential for the health and well-being of the workers.

Air compliance through pollution prevention at Air Force Materiel Command facilities.

Energy Technology Data Exchange (ETDEWEB)

Kolpa, R.; Ryckman, S.J. Jr.; Smith, A.E.

1999-03-19

Options for air compliance through pollution prevention (P2) have been identified at 14 facilities of the US Air Force Materiel Command, ranging from depots with significant light industrial activity to laboratories. Previous P2 efforts concentrated on reducing hazardous and solid wastes, with any reduction in air impacts generally being a collateral benefit. This work focused on reducing air emissions and air compliance vulnerabilities. P2 options were identified in three stages. First, potentially applicable P2 options were identified from Internet and published information. Attention was given to identifying the types of sources to which an option could be applied, the option's state of development, and constraints that could limit its application. Traditional P2 options involving technology or equipment changes and material substitution were considered. In addition, newer approaches based on administrative ''controls'' were considered. These included inserting P2 into operating permits in exchange for administrative relief, privatization, derating boilers, and reducing an installation's potential to emit and compliance vulnerability by separating sources not under the Air Force's ''common control.'' Next, criteria and toxic emissions inventories by source category were prepared from inventory data supplied by facilities. The major problems at this stage were differences in the levels of detail provided by facilities and in the categories used by different installations. Emitting categories were matched to P2 option categories to identify candidate options. Candidates were screened to account for local regulations and technical information about sources in the inventories. When possible, emission reductions were estimated to help facility personnel prioritize options. Some options identified are being actively pursued by facilities to determine their site-specific feasibility. Although much work has been

Better Place

DEFF Research Database (Denmark)

Rask, Morten; Bakke, Nikolas; Lindhøj, Jan

Better Place is trying to reshape the automotive industry by shifting transportation from a dependency on oil to a reliance on environmentally friendly renewable energy. Better Place is developing an extensive infrastructure system that will utilise overcapacity in the production of wind power...... among others and that will drive the global transportation industry to becoming driven by electric vehicles (EVs). Better Place does this by selling its customers 'mileage' and a car without a battery. The case highlights the internationalisation process of Better Place from an international business...... perspective in order to encourage a discussion and debate about how Better Place can make their grand vision a reality in the future by overcoming the obstacles that historically have been challenging the rise of the EV industry. The case includes a historical background of the EV industry by using Denmark...

Air pollution and lichens

Energy Technology Data Exchange (ETDEWEB)

Ferry, B W; Baddeley, M S; Hawksworth, D L [eds.

1973-01-01

This volume reflects the particular concern of many biologists for the effects of air pollution and illustrates the special values of lichens as plants suitable for such studies. It brings together contributions from many experts in this field and includes much previously unpublished data, as well as up-to-date review chapters. Emphasis is placed on the logical progression from field observational studies to critical laboratory investigations aimed at elucidating the modes of action of various air pollutants on the living tissues of lichens. The action of such pollutants on vascular plants is also discussed. It is the editors' intention that the book be both a reference volume and an encouragement for further wor

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) LabVIEW Basics I:  23 - 25.1.2006 (3 days) C++ Programming Advanced - Traps and Pitfalls: 24 - 27.1.2006 (4 days) LabVIEW Basics II:  26 - 27.1.2006 (2 days) Joint PVSS-JCOP Framework: 30.1 - 3.2.2006 (5 days, free of charge) Finite State Machines in the JCOP Framework : ...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) AutoCAD - mise à jour d’AutoCAD 2002 à AutoCAD 2006 : 8.12.2005 (1 journée - pour les utilisateurs d’AutoCAD 2002) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) Finite State Machines in the JCOP Framework: 13 - 15.12.2005 (3 days) PCAD PCB - Introduction : 14 - 16.12.2005 (3 jours) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) AutoCAD 2006 - niveau 1 : 19, 20, 24 & 25.1.2006 (4 jours) LabVIEW Basics I:  23 - 25.1.2006...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Joint PVSS JCOP Framework : 21 - 25.11.2005 (5 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11....

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Joint PVSS JCOP Framework : 21 - 25.11.2005 (5 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : ...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW...

Technical Training: Places available**

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) LabVIEW Application Development (Intermediate 1): 5 - 7.12.2005 (3 d...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) Fron...

Working in London hospitals: perceptions of place in nursing students' employment considerations.