WorldWideScience

Sample records for wood storks cormorants

  1. Potential risk to wood storks (Mycteria americana) from mercury in Carolina Bay fish

    International Nuclear Information System (INIS)

    Brant, H.A.; Jagoe, C.H.; Snodgrass, J.W.; Bryan, A.L.; Gariboldi, J.C.

    2002-01-01

    Fish mercury levels from some Carolina bays pose risk to wood stork. - Carolina bays are freshwater wetlands that serve as important feeding habitats for the endangered wood stork (Mycteria americana). Water levels in these bays fluctuate greatly and tend to be acidic and rich in dissolved organic carbon (DOC), factors that favor mercury (Hg) methylation and bioaccumulation in fish. To assess potential risks to wood storks consuming mercury contaminated fish in bays, we sampled fish from 10 bays on the Savannah River Site (SRS), South Carolina, an area with documented use by wood storks. Whole body mercury concentrations in 258 fishes of three species (Erimyzon sucetta, Acantharchus pomotis and Esox americanus) commonly consumed by wood storks were determined. Risk factors for nestlings and free-ranging adults were calculated using published no and lowest observable adverse effect concentration (NOAEC and LOAEC) values for birds. Fish from higher trophic levels and those from wetlands with relatively shallow maximum depths and fluctuating water levels were more likely to exceed NOAEC and LOAEC values. Calculation of exposure rates of nestling wood storks indicated they are at highest risk during the first 10 days of the nestling period. These calculations suggest that there is potential concern for wood storks foraging in relatively shallow bays with fluctuating water levels, even though there is no obvious local source of mercury to these wetlands

  2. Heavy metal and selenium levels in endangered wood storks Mycteria americana from nesting colonies in Florida and Costa Rica.

    Science.gov (United States)

    Burger, J; Rodgers, J A; Gochfeld, M

    1993-05-01

    Colonially-nesting birds often nest in coastal areas, along rivers, or near other bodies of water that also are potentially polluted from industrial, agricultural or urban development. The levels of heavy metals and selenium were examined in the feathers of young wood storks Mycteria americana nesting in Northeastern Florida and from adult and young storks nesting on the Tempisque River on the west coast of Costa Rica. There were no significant yearly differences among the chicks from Costa Rica. Concentration of mercury, cadmium, and lead were significantly higher in the chicks from Florida compared to those from Costa Rica. Adult wood storks at Costa Rica had significantly higher levels of lead, cadmium, selenium, and manganese than young from the same colony.

  3. Wood Storks of the Birdsville Colony and swamps of the Savannah River Site: General overview of research findings, 1983--1990

    International Nuclear Information System (INIS)

    Coulter, M.C.

    1993-02-01

    The population of Wood Storks (Mycteria americana) that breeds in the United States has decreased from an estimated 20,000 breeding pairs in 1930 to just under 5,000 pairs in 1980. Since 1980, the number has remained relatively stable, fluctuating between 3,500 and 5,500 breeding pairs. The decline prompted the US Fish and Wildlife Service (USFWS) to list the United States population of Wood Storks as endangered in 1984. When the US Department of Energy (USDOE) decided to restart L-Reactor on the Savannah River Site (SRS), there was concern that when the reactor was restarted, cooling water flowing into the Steel Creek Delta would raise the water level and the area would become too deep for foraging storks. The potential loss of this area to storks was important because storks had been observed foraging in the Steel Creek Delta. The USDOE began consultation with the USFWS in April, 1984, and the USDOE subsequently agreed to develop and maintain alternative foraging habitat to replace the potential loss. In order to design and manage the alternate foraging ponds as effectively as possible, it was necessary to understand aspects of the biology of the storks, the characteristics of their foraging sites and the patterns of their use of the SRSS. Results are described

  4. Sedentary nestlings of Wood Stork as monitors of mercury contamination in the gold mining region of the Brazilian Pantanal

    Energy Technology Data Exchange (ETDEWEB)

    Nassif Del Lama, Silvia, E-mail: dsdl@ufscar.br [Laboratorio Genetica de Aves, Departamento de Genetica e Evolucao, Universidade Federal de Sao Carlos, Rodovia Washington Luis km 235, 13565-905 Sao Carlos, Sao Paulo (Brazil); Dosualdo Rocha, Cristiano [Laboratorio Genetica de Aves, Departamento de Genetica e Evolucao, Universidade Federal de Sao Carlos, Rodovia Washington Luis km 235, 13565-905 Sao Carlos, Sao Paulo (Brazil); Figueiredo Jardim, Wilson [Institute of Chemistry, State University of Campinas, P.O. Box 6154, 13083-970 Sao Paulo (Brazil); Tsai, Jo-Szu; Frederick, Peter Crawford [Department of Wildlife Ecology and Conservation, P.O. Box 110430, University of Florida, Gainesville, FL 32611 (United States)

    2011-11-15

    Sedentary organisms that are at top trophic levels allow inference about the level of local mercury contamination. We evaluated mercury contamination in feather tissue of nestling Wood Storks (Mycteria americana), sampled in different parts of the Brazilian Pantanal that were variably polluted by mercury releases from gold mining activities. Levels of mercury in feathers sampled in seven breeding colonies were determined by atomic absorption spectroscopy, and the mean value of mercury concentration was 0.557 {mu}g/g, dry weight (n=124), range 0.024-4.423 {mu}g/g. From this total sample, 21 feathers that represent 30% of nestlings collected in Porto da Fazenda and Tucum colonies, in the northern region, ranged from 1.0 to 4.43 {mu}g/g, dry weight (median value=1.87 {mu}g/g). We found significant differences among regions (H=57.342; p=0<0.05). Results suggest that permanently flooded areas, or along mainstream rivers are more contaminated by mercury than dry areas, regardless of the distance from the gold mining center, which is located in the northern Pantanal. Highest values found in nestlings feathers were similar to those found in feathers of adult birds and in tissues of adult mammals that are less sedentary and were captured in the same region of Pantanal. These findings indicate that mercury released has been biomagnified and it is present in high concentrations in tissues of top consumers. We suggest a program to monitor mercury availability in this ecosystem using sedentary life forms of top predators like Wood Storks or other piscivorous birds. - Highlights: Black-Right-Pointing-Pointer Sedentary stork nestlings were used for the first time to show local mercury contamination of Pantanal. Black-Right-Pointing-Pointer Differences were found among regions but they are not explained only by distance from the gold mining. Black-Right-Pointing-Pointer Permanently flooded areas and areas along mainstream rivers are more contaminated than dry areas. Black

  5. Sedentary nestlings of Wood Stork as monitors of mercury contamination in the gold mining region of the Brazilian Pantanal

    International Nuclear Information System (INIS)

    Nassif Del Lama, Silvia; Dosualdo Rocha, Cristiano; Figueiredo Jardim, Wilson; Tsai, Jo-Szu; Frederick, Peter Crawford

    2011-01-01

    Sedentary organisms that are at top trophic levels allow inference about the level of local mercury contamination. We evaluated mercury contamination in feather tissue of nestling Wood Storks (Mycteria americana), sampled in different parts of the Brazilian Pantanal that were variably polluted by mercury releases from gold mining activities. Levels of mercury in feathers sampled in seven breeding colonies were determined by atomic absorption spectroscopy, and the mean value of mercury concentration was 0.557 μg/g, dry weight (n=124), range 0.024–4.423 μg/g. From this total sample, 21 feathers that represent 30% of nestlings collected in Porto da Fazenda and Tucum colonies, in the northern region, ranged from 1.0 to 4.43 μg/g, dry weight (median value=1.87 μg/g). We found significant differences among regions (H=57.342; p=0<0.05). Results suggest that permanently flooded areas, or along mainstream rivers are more contaminated by mercury than dry areas, regardless of the distance from the gold mining center, which is located in the northern Pantanal. Highest values found in nestlings feathers were similar to those found in feathers of adult birds and in tissues of adult mammals that are less sedentary and were captured in the same region of Pantanal. These findings indicate that mercury released has been biomagnified and it is present in high concentrations in tissues of top consumers. We suggest a program to monitor mercury availability in this ecosystem using sedentary life forms of top predators like Wood Storks or other piscivorous birds. - Highlights: ► Sedentary stork nestlings were used for the first time to show local mercury contamination of Pantanal. ► Differences were found among regions but they are not explained only by distance from the gold mining. ► Permanently flooded areas and areas along mainstream rivers are more contaminated than dry areas. ► Mercury has been biomagnified in Pantanal and it is found in high concentrations in top

  6. House sparrows benefit from the conservation of white storks

    Science.gov (United States)

    Kosicki, Jakub Z.; Sparks, Tim H.; Tryjanowski, Piotr

    2007-05-01

    As with many farmland bird species, the house sparrow Passer domesticus is declining in Europe, mainly due to intensification of agriculture reducing nest sites and food supplies. During 2002-2005, we studied the population size and nest site characteristics of house sparrows breeding within white stork Ciconia ciconia nests in a large area of agricultural landscape within western Poland. To explain sparrow density within stork nests, we examined characteristics of white stork nests (position, age, productivity) and the farm type around the nest. House sparrow density was greatest in the longest established (and hence larger) white stork nests located on traditionally managed farms. Two recent changes appear to have adverse effects on house sparrows. The first is the intensification of farming and the second is active management of white stork nests on electric poles to reduce nest size and thus avoid both disruption to the electrical supply and electrocution of white storks. Because the white stork has such a high profile in Poland, there are numerous schemes to conserve and enhance this species. In conclusion, we clearly show that protecting one species can have valuable, although unplanned, benefits to another species of conservation interest, the house sparrow.

  7. Diet of double-crested cormorants wintering in Texas

    Science.gov (United States)

    Campo, J.J.; Thompson, B.C.; Barron, J.C.; Telfair II, R. C.; Durocher, P.; Gutreuter, S.

    1993-01-01

    The diets of 420 Double-crested Cormorants (Phalacrocorax auritus) were studied during November 1986-March 1987 on eight public reservoirs in Texas. Prey included 29 fish species and the mean live weight of fish per bird was 122 g. Fishes a??415 mm long were ingested, but those a??125 mm accounted for 90% of cormorant food contents by number. Shad (Dorosoma spp.) and sunfishes (Lepomis spp.) accounted for 90% of the total food items by number. Consumption of fishes (percent by weight) was different for male vs. female and adult vs. juvenile cormorants. Total consumption of fish by weight was consistent throughout the period; however, fewer but much larger fish were consumed after 15 February. Cormorants ate fishes that were most abundant in reservoirs. Sport fishes made up a substantial portion of cormorant food by weight, but not by number on some reservoirs. Cormorants ate very few large sport fish, however.

  8. Cormorant predation on PIT-tagged lake fish

    DEFF Research Database (Denmark)

    Skov, Christian; Jepsen, Niels; Baktoft, Henrik

    2014-01-01

    The present study use data from recovered PIT (Passive Integrated Transponder) tags to explore species-and size-specific annual predation rates by cormorants on three common lacustrine fishes (size range 120-367 mm) in a European lake; roach (Rutilus rutilus), common bream (Abramis brama) and perch...... (Perca fluviatilis). In addition, we quantify the level of age/size truncation that cormorant predation could introduce in a population of perch, an important fish for recreational angling as well as for trophic interactions and ecosystem function in European lakes. Based on three years of PIT tagging...... of fish in Lake Viborg and subsequent recoveries of PIT tags from nearby cormorant roosting and breeding sites, we show that cormorants are major predators of roach, bream and perch within the size groups we investigated and for all species larger individuals had higher predation rates. Perch appear...

  9. CORMORANT – A PROBLEM AND A POSSIBLE SOLUTION

    Directory of Open Access Journals (Sweden)

    Krešimir Pažur

    1996-03-01

    Full Text Available Cormorant (Phalacrocorax carbo is ichthyophagous bird which has bred in great numbers causing great damages in ponds and open waters after its hunt was fully banned in 1979. Ponds have been led to the treshold of profitabi]ity and open waters have been deserted - fish stock has decreased even for 90% at particular locations. There have been held numerous meetings on decreasing the damages caused by cormorants, some of them even on the state level but they gave no results. This work suggests a radical and economically acceptable measure by which the number of cormorants shall in a few years be decreased to the number which permits them to exercise its natural function: clearance of water from diseased fish. Damages will not be so great as they are now and the number of cormorants will be ecologically acceptable. The essence of the measure is following: after cormorants lay their eggs, all trees on which they build their nests should be cut down in few years period. Trees should be cut down perhaps two times in the same year if cormorants lay their eggs again. Thus, a whole generation shall be eliminated from the population. There shall be no damage on trees because they would normally be ruined in two year period because of herbicide effect of cormorants' droppings. Commissions consisting of qualified experts Cornithologist, agronomist - fish expert, veterinarian - expert for fish blights, forester, environmentalist and perhaps other experts should be established on the level of individual states as well on the Europian level. The commission should determine the duration of the measure taking into account that the cormorant population doubles every three and half year in existing conditions of total protection. The commission should exercise the control of the population after measure has been carried out.

  10. Underwater hearing in the great cormorant (Phalacrocorax carbo sinensis)

    DEFF Research Database (Denmark)

    Hansen, Kirstin Anderson; Larsen, Ole Næsbye; Wahlberg, Magnus

    2016-01-01

    The underwater hearing threshold of a great cormorant (Phalacrocroax carbo sinensis) was measured at 2 kHz using psychophysical methods. Previous in-air and underwater testing suggests that cormorants have rather poor in-air hearing compared to other birds of similar size (Johansen, 2016). Prelim......The underwater hearing threshold of a great cormorant (Phalacrocroax carbo sinensis) was measured at 2 kHz using psychophysical methods. Previous in-air and underwater testing suggests that cormorants have rather poor in-air hearing compared to other birds of similar size (Johansen, 2016...

  11. Counting cormorants

    DEFF Research Database (Denmark)

    Bregnballe, Thomas; Carss, David N; Lorentsen, Svein-Håkon

    2013-01-01

    This chapter focuses on Cormorant population counts for both summer (i.e. breeding) and winter (i.e. migration, winter roosts) seasons. It also explains differences in the data collected from undertaking ‘day’ versus ‘roost’ counts, gives some definitions of the term ‘numbers’, and presents two...

  12. Toxoplasma gondii antibodies in the white stork Ciconia ciconia.

    Science.gov (United States)

    Andrzejewska, Izabela; Tryjanowski, Piotr; Zduniak, Piotr; Dolata, Pawel T; Ptaszyk, Jerzy; Cwiertnia, Piotr

    2004-01-01

    The prevalence of Toxoplasma gondii in chicks of wild birds and captive individuals was studied in the Poznań environs and in the Poznań Zoological Garden in the years 2002-2003. Bird blood was tested for T. gondii antibodies by an indirect fluorescent antibody test. T. gondii antibodies were detected from 5.8% of 205 analysed white stork chicks and 13.6% of 44 analysed adult storks in the zoo. Because toxoplasmosis is one of the more common parasitic zoonoses worldwide, we briefly discuss the potential epidemiological importance of stork toxoplasmosis to humans.

  13. Developing nondestructive techniques for managing conflicts between fisheries and double-crested cormorant colonies

    Science.gov (United States)

    Suzuki, Yasuko; Roby, Daniel D.; Lyons, Donald E.; Courtot, Karen; Collis, Ken

    2015-01-01

    Double-crested cormorants (Phalacrocorax auritus) have been identified as the source of significant mortality to juvenile salmonids (Oncorhynchus spp.) in the Columbia River Basin. Management plans for reducing the size of a large colony on East Sand Island (OR, USA) in the Columbia River estuary are currently being developed. We evaluated habitat enhancement and social attraction as nondestructive techniques for managing cormorant nesting colonies during 2004–2007. We tested these techniques on unoccupied plots adjacent to the East Sand Island cormorant colony. Cormorants quickly colonized these plots and successfully raised young. Cormorants also were attracted to nest and raised young on similar plots at 2 islands approximately 25 km from East Sand Island; 1 island had a history of successful cormorant nesting whereas the other was a site where cormorants had previously nested unsuccessfully. On a third island with no history of cormorant nesting or nesting attempts, these techniques were unsuccessful at attracting cormorants to nest. Our results suggest that some important factors influencing attraction of nesting cormorants using these techniques include history of cormorant nesting, disturbance, and presence of breeding cormorants nearby. These techniques may be effective in redistributing nesting cormorants away from areas where fish stocks of conservation concern are susceptible to predation, especially if sites with a recent history of cormorant nesting are available within their foraging or dispersal range. Published 2015. Wiley Periodicals, Inc. This article is a US Government work and, as such, is in the public domain in the United States of America.

  14. Factors determining presence of passerines breeding within White Stork Ciconia ciconia nests

    Science.gov (United States)

    Zbyryt, Adam; Jakubas, Dariusz; Tobolka, Marcin

    2017-10-01

    Nests of White Stork Ciconia ciconia are commonly used by various passerines as nesting sites. In this study, we investigated factors determining presence and number of pairs of species breeding within White Stork nests in an extensive farmland in NE Poland. In 133 (57%) out of 233 White Stork nests, we found at least one breeding pair of passerine bird. These were from three species: House Sparrows Passer domesticus (68% of 133 nests with co-breeding), Tree Sparrows Passer montanus (65%), and Starlings Sturnus vulgaris (30%). The probability of breeding passerines within White Stork nests increased with increasing nest thickness, and was significantly higher in currently occupied nests. Sparrows were more likely to breed in White Stork nests located on electricity poles, situated closer to settlements and surrounded mainly by arable fields where meadows were not prevalent. In this paper, we show that White Stork nests are favorable nesting sites for passerines, as they are well insulated and provide an anti-predatory shield.

  15. Factors determining presence of passerines breeding within White Stork Ciconia ciconia nests.

    Science.gov (United States)

    Zbyryt, Adam; Jakubas, Dariusz; Tobolka, Marcin

    2017-08-18

    Nests of White Stork Ciconia ciconia are commonly used by various passerines as nesting sites. In this study, we investigated factors determining presence and number of pairs of species breeding within White Stork nests in an extensive farmland in NE Poland. In 133 (57%) out of 233 White Stork nests, we found at least one breeding pair of passerine bird. These were from three species: House Sparrows Passer domesticus (68% of 133 nests with co-breeding), Tree Sparrows Passer montanus (65%), and Starlings Sturnus vulgaris (30%). The probability of breeding passerines within White Stork nests increased with increasing nest thickness, and was significantly higher in currently occupied nests. Sparrows were more likely to breed in White Stork nests located on electricity poles, situated closer to settlements and surrounded mainly by arable fields where meadows were not prevalent. In this paper, we show that White Stork nests are favorable nesting sites for passerines, as they are well insulated and provide an anti-predatory shield.

  16. G4-STORK: A Geant4-based Monte Carlo reactor kinetics simulation code

    International Nuclear Information System (INIS)

    Russell, Liam; Buijs, Adriaan; Jonkmans, Guy

    2014-01-01

    Highlights: • G4-STORK is a new, time-dependent, Monte Carlo code for reactor physics applications. • G4-STORK was built by adapting and expanding on the Geant4 Monte Carlo toolkit. • G4-STORK was designed to simulate short-term fluctuations in reactor cores. • G4-STORK is well suited for simulating sub- and supercritical assemblies. • G4-STORK was verified through comparisons with DRAGON and MCNP. - Abstract: In this paper we introduce G4-STORK (Geant4 STOchastic Reactor Kinetics), a new, time-dependent, Monte Carlo particle tracking code for reactor physics applications. G4-STORK was built by adapting and expanding on the Geant4 Monte Carlo toolkit. The toolkit provides the fundamental physics models and particle tracking algorithms that track each particle in space and time. It is a framework for further development (e.g. for projects such as G4-STORK). G4-STORK derives reactor physics parameters (e.g. k eff ) from the continuous evolution of a population of neutrons in space and time in the given simulation geometry. In this paper we detail the major additions to the Geant4 toolkit that were necessary to create G4-STORK. These include a renormalization process that maintains a manageable number of neutrons in the simulation even in very sub- or supercritical systems, scoring processes (e.g. recording fission locations, total neutrons produced and lost, etc.) that allow G4-STORK to calculate the reactor physics parameters, and dynamic simulation geometries that can change over the course of simulation to illicit reactor kinetics responses (e.g. fuel temperature reactivity feedback). The additions are verified through simple simulations and code-to-code comparisons with established reactor physics codes such as DRAGON and MCNP. Additionally, G4-STORK was developed to run a single simulation in parallel over many processors using MPI (Message Passing Interface) pipes

  17. Vision and foraging in cormorants: more like herons than hawks?

    Directory of Open Access Journals (Sweden)

    Craig R White

    Full Text Available BACKGROUND: Great cormorants (Phalacrocorax carbo L. show the highest known foraging yield for a marine predator and they are often perceived to be in conflict with human economic interests. They are generally regarded as visually-guided, pursuit-dive foragers, so it would be expected that cormorants have excellent vision much like aerial predators, such as hawks which detect and pursue prey from a distance. Indeed cormorant eyes appear to show some specific adaptations to the amphibious life style. They are reported to have a highly pliable lens and powerful intraocular muscles which are thought to accommodate for the loss of corneal refractive power that accompanies immersion and ensures a well focussed image on the retina. However, nothing is known of the visual performance of these birds and how this might influence their prey capture technique. METHODOLOGY/PRINCIPAL FINDINGS: We measured the aquatic visual acuity of great cormorants under a range of viewing conditions (illuminance, target contrast, viewing distance and found it to be unexpectedly poor. Cormorant visual acuity under a range of viewing conditions is in fact comparable to unaided humans under water, and very inferior to that of aerial predators. We present a prey detectability model based upon the known acuity of cormorants at different illuminances, target contrasts and viewing distances. This shows that cormorants are able to detect individual prey only at close range (less than 1 m. CONCLUSIONS/SIGNIFICANCE: We conclude that cormorants are not the aquatic equivalent of hawks. Their efficient hunting involves the use of specialised foraging techniques which employ brief short-distance pursuit and/or rapid neck extension to capture prey that is visually detected or flushed only at short range. This technique appears to be driven proximately by the cormorant's limited visual capacities, and is analogous to the foraging techniques employed by herons.

  18. Are white storks addicted to junk food? Impacts of landfill use on the movement and behaviour of resident white storks (Ciconia ciconia) from a partially migratory population.

    Science.gov (United States)

    Gilbert, Nathalie I; Correia, Ricardo A; Silva, João Paulo; Pacheco, Carlos; Catry, Inês; Atkinson, Philip W; Gill, Jenny A; Franco, Aldina M A

    2016-01-01

    The migratory patterns of animals are changing in response to global environmental change with many species forming resident populations in areas where they were once migratory. The white stork (Ciconia ciconia) was wholly migratory in Europe but recently guaranteed, year-round food from landfill sites has facilitated the establishment of resident populations in Iberia. In this study 17 resident white storks were fitted with GPS/GSM data loggers (including accelerometer) and tracked for 9.1 ± 3.7 months to quantify the extent and consistency of landfill attendance by individuals during the non-breeding and breeding seasons and to assess the influence of landfill use on daily distances travelled, percentage of GPS fixes spent foraging and non-landfill foraging ranges. Resident white storks used landfill more during non-breeding (20.1 % ± 2.3 of foraging GPS fixes) than during breeding (14.9 % ± 2.2). Landfill attendance declined with increasing distance between nest and landfill in both seasons. During non-breeding a large percentage of GPS fixes occurred on the nest throughout the day (27 % ± 3.0 of fixes) in the majority of tagged storks. This study provides first confirmation of year-round nest use by resident white storks. The percentage of GPS fixes on the nest was not influenced by the distance between nest and the landfill site. Storks travelled up to 48.2 km to visit landfills during non-breeding and a maximum of 28.1 km during breeding, notably further than previous estimates. Storks nesting close to landfill sites used landfill more and had smaller foraging ranges in non-landfill habitat indicating higher reliance on landfill. The majority of non-landfill foraging occurred around the nest and long distance trips were made specifically to visit landfill. The continuous availability of food resources on landfill has facilitated year-round nest use in white storks and is influencing their home ranges and movement behaviour. White

  19. Cormorants as visitors in the Vorsø colony

    DEFF Research Database (Denmark)

    Bregnballe, Thomas; Vinas, Marta Mas; Gregersen, Jens

    2011-01-01

    Like other seabirds Great Cormorants Phalacrocorax carbo sinensis are known to prospect in potential breeding colonies during their first years of life before they settle to breed. Based on daily resightings of colour-ringed cormorants in the old Vorsø colony we examined the difference between...

  20. Plumage and ecology of cormorants | Siegfried | African Zoology

    African Journals Online (AJOL)

    Plumage and ecology of cormorants. W.R. Siegfried, A.J. Williams, P.G.H. Frost, J.B. Kinahan. Abstract. The paper draws on data attending the etho-ecology of four species of cormorants (Phalacrocoracidae) in support of an hypothesis for the adaptive significance of the predominantly dark plumage of these birds.

  1. A male hooded merganser swims in the waters of KSC

    Science.gov (United States)

    1999-01-01

    The distinctive fan-shaped, black-bordered crest and striped breast identify this hooded merganser, swimming in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  2. A merganser swims in the waters of KSC

    Science.gov (United States)

    1999-01-01

    A young female red-breasted merganser swims in the quicksilver water of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000- acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  3. Migration and wintering sites of Pelagic Cormorants determined by satellite telemetry

    Science.gov (United States)

    Hatch, Shyla A.; Gill, V.A.; Mulcahy, D.M.

    2011-01-01

    Factors affecting winter survival may be key determinants of status and population trends of seabirds, but connections between breeding sites and wintering areas of most populations are poorly known. Pelagic Cormorants (Phalacrocorax pelagicus; N= 6) surgically implanted with satellite transmitters migrated from a breeding colony on Middleton Island, northern Gulf of Alaska, to wintering sites in southeast Alaska and northern British Columbia. Winter locations averaged 920 km (range = 600-1190 km) from the breeding site. Migration flights in fall and spring lasted ???5 d in four instances. After reaching wintering areas, cormorants settled in narrowly circumscribed inshore locations (~10-km radius) and remained there throughout the nonbreeding period (September- March). Two juveniles tagged at the breeding colony as fledglings remained at their wintering sites for the duration of the tracking interval (14 and 22 mo, respectively). Most cormorants used multiple sites within their winter ranges for roosting and foraging. Band recoveries show that Pelagic Cormorants in southern British Columbia and Washington disperse locally in winter, rather than migrating like the cormorants in our study. Radio-tagging and monitoring cormorants and other seabirds from known breeding sites are vital for understanding migratory connectivity and improving conservation strategies for local populations. ?? 2011 The Authors. Journal of Field Ornithology ?? 2011 Association of Field Ornithologists.

  4. Sexual differences in food preferences in the white stork: an experimental study

    Science.gov (United States)

    Kwieciński, Zbigniew; Rosin, Zuzanna M.; Dylewski, Łukasz; Skórka, Piotr

    2017-06-01

    Sex differences in the foraging ecology of monomorphic species are poorly understood, due to problems with gender identification in field studies. In the current study, we used experimental conditions to investigate the food preferences of the white stork Ciconia ciconia, an opportunistic species in terms of food, but characterised by a low level of sexual dimorphism. During a 10-day experiment, 29 individuals (20 females and 9 males) were studied by means of a `cafeteria test' in which the storks' diet consisted of mammals, birds, fish, amphibians, insects and earthworms. The storks preferred food characterised by high calorific and protein values such as mammals, birds and fish. Sexes differed strongly in their preferences; males preferred mammals, whereas females preferred birds. Moreover, females consumed insects and earthworms less often than males. Interestingly, males spent significantly less time foraging than females. We have demonstrated that the white stork exhibits clear sexual differences in food preferences which are mostly attributable to differences in parental duties, physiology and anatomy.

  5. KSC-04PD-0045

    Science.gov (United States)

    2004-01-01

    KENNEDY SPACE CENTER, FLA. -- Three male and one female hooded mergansers swim in the quicksilver water of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  6. Hooded mergansers swim in the waters of KSC

    Science.gov (United States)

    1999-01-01

    A male and two female hooded mergansers swim in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. The male displays its distinctive fan-shaped, black-bordered crest. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  7. A female hooded merganser swims in the waters of KSC

    Science.gov (United States)

    1999-01-01

    A female hooded merganser swims solo in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. The male is distinguished by a fan-shaped, black-bordered crest and striped breast. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  8. Madaffald fra storkøkkener

    DEFF Research Database (Denmark)

    Kromann, Lisbeth; Madsen, Anne Seth; Schmidt, Jannick

    og forbehandle affaldet til bioforgasning. Biogas har nogle fordele Undersøgelsen viser, at biogas, forbrænding og kompostering alle er velegnede alternative metoder til at håndtere madaffald fra storkøkkener. Der er ikke umiddelbart problemer med teknik eller håndtering ved indsamling, forbehandling......Grise må ikke længere spise madaffald fra storkøkkener. Det er konsekvensen af en ny EU forordning. Derfor skal madaffaldet udnyttes på anden vis. Et projekt har miljøvurderet de tre alternativer: Biogas, forbrænding og kompostering. Det sidste er uomtvisteligt den dårligste løsning, når man ser på...... miljøeffekter, ressourceforbrug og affald. Biogas og forbrænding er de bedste løsninger. Overordnet er biogas en bedre løsning end forbrænding, fordi der bruges færre ressourcer og produceres mindre affald. Derimod afhænger udfaldet for miljøeffekternes vedkommende af, hvilket system man vælger til at indsamle...

  9. Cormorant predation overlaps with fish communities and commercial-fishery interest in a Swedish lake

    DEFF Research Database (Denmark)

    Ovegård, K. M.; Öhman, K.; Mikkelsen, Jørgen Skole

    2017-01-01

    The increase of the fish-eating cormorant (Phalacrocorax carbo sinensis) in Europe has resulted in conflicts with fisheries. In Lake Roxen, Sweden, cormorants are blamed for causing a decrease in fishery catches. To study and describe the potential effects that cormorants may have had on fish in ...

  10. Long-term changes in winter distribution of Danish ringed Great Cormorants

    DEFF Research Database (Denmark)

    Bregnballe, Thomas; Herrmann, Christof; Wendt, Juliane

    2017-01-01

    in the geographical origin of cormorants recovered in Croatia confirmed the suspicion that declines in numbers of recoveries of Danish-ringed cormorants in the south-eastern wintering area reflected a true westward shift in winter distribution. The composition of recoveries in Croatia revealed that the south...

  11. Chaunocephalosis in a wild population of Asian open-billed storks in Thailand.

    Science.gov (United States)

    Poonswad, P; Chatikavanij, P; Thamavit, W

    1992-07-01

    The most common trematode collected from Asian open-billed storks (Anastomus oscitans) was Chaunocephalus ferox (80% prevalence). The trematode was paired in granulomas in the intestinal wall. Based on histological examination of these capsules, there was degeneration and necrosis of muscle cells in the tunica muscularis. Granulation tissue with hetrophil and lymphocyte infiltration appeared in the granulomas. Intestinal villi were shorter and wider in infected areas than in non-infected areas. Some intestinal glands were dilated. Storks with high intensity of C. ferox appeared ill. The death of storks infected with C. ferox may result from malnutrition due to the loss of absorptive function of the intestine and from the effect of granuloma formation which might interfere with the intestinal peristalsis.

  12. In-air hearing of the great cormorant (Phalacrocorax carbo)

    DEFF Research Database (Denmark)

    Maxwell, Alyssa; Hansen, Kirstin Anderson; Ortiz, Sara Torres

    2017-01-01

    Many aquatic birds use sounds extensively for in-air communication. Regardless of this, we know very little about their hearing abilities. The in-air audiogram of a male adult great cormorant (Phalacrocorax carbo) was determined using psychophysical methods (method of constants). Hearing thresholds...... as to assess the impact of increasing in-air anthropogenic noise levels on cormorants and other aquatic birds....

  13. Stork Color Proofing Technology

    Science.gov (United States)

    Ekman, C. Frederick

    1989-04-01

    For the past few years, Stork Colorproofing B.V. has been marketing an analog color proofing system in Europe based on electrophoto-graphic technology it pioneered for the purpose of high resolution, high fidelity color imaging in the field of the Graphic Arts. Based in part on this technology, it will make available on a commercial basis a digital color proofing system in 1989. Proofs from both machines will provide an exact reference for the user and will look, feel, and behave in a reproduction sense like the printed press sheet.

  14. Concentration ratios to great cormorant (Phalacrocorax carbo) at Olkiluoto repository site

    Energy Technology Data Exchange (ETDEWEB)

    Kangasniemi, Ville; Ikonen, Ari T.K. [Environmental Research and Assessment EnviroCase, Ltd., Hallituskatu 1 D 4, 28100 Pori (Finland); Haavisto, Fiia [FM Meri and Erae Oy, Seijaistentie 133a, 21230 Lemu (Finland); Salmi, Juhani A. [Finnish Game and Fisheries Research Institute, Itaeinen Pitkaekatu 3, 20520 Turku (Finland)

    2014-07-01

    Olkiluoto Island on the western coast of Finland has been selected as a repository site for spent nuclear fuel disposal. The great cormorant was a common species in the Finnish coastal area and possibly also a resource for human uses before the decline of the cormorant population in the 18. century. During the last decade, the great cormorant has become again a relevant part of food web in the Bothnian Sea coastal area. Due to the regulatory requirements, the biosphere assessment demonstrating the long-term safety of the repository is developed into more and more site specific. As the adequate literature data on common waterfowl is sparse or in some cases lacking, samples of adult cormorants, eggs and guano together with water and fish samples were collected from the Olkiluoto coastal area. This contribution will present concentration ratios of stable element based on these samples with focus on the elements of a high relevance to the biosphere assessment of the Olkiluoto spent fuel repository together with discussion on the role of food (fish) versus the application of the water-to-bird concentration ratio. (authors)

  15. A preliminary study of cross-amplified microsatellite loci using molted feathers from a near-threatened Painted Stork (Mycteria leucocephala) population of north India as a DNA source.

    Science.gov (United States)

    Sharma, Bharat Bhushan; Banerjee, Basu Dev; Urfi, Abdul Jamil

    2017-11-21

    In continuation of an earlier study in which we reported the cross-amplification of Wood stork microsatellites on the DNA obtained from molted feathers of Painted stork (Mycteria leucocephala), here we investigated the nature of cross-amplified microsatellites and the effect of non-invasive samples on cross-amplification success. In a limited manner, we also addressed the genetic diversity and differentiation in a north Indian population of the Painted Stork examined over three nesting seasons. Among the nine cross-amplified loci, only 5 were polymorphic. Three and 6 loci exhibited low ( 80), respectively. For 36 of 145 samples most of the loci failed to amplify. For genetic diversity, only 3 loci could be used since others exhibited low amplification and linkage disequilibrium. Probability of identity (0.034) was not low enough to develop a confidence that the similar genotypes originate from the same individual. Forty-two unique genotypes were identified. In 3 loci, a low to moderate level of genetic diversity (mean He = 0.435) was reported. Non-significant Fst (0.003, P = 0.230), G'stH (0.005, P = 0.247) and Dest (0.003, P = 0.250) values indicate a lack of structuring in temporally distributed populations of Delhi Zoo. The limitations and uniqueness of this study are discussed.

  16. Status of the breeding population of Great Cormorants in Denmark in 2012

    DEFF Research Database (Denmark)

    Bregnballe, Thomas; Hansen, Rikke; Therkildsen, Ole Roland

    2013-01-01

    There were 27,237 occupied nests of Great Cormorants (Phalacrocorax carbo sinensis) in the summer of 2012 in Denmark. This is an increase of ca. 1,700 nests compared to 2011. The cormorants had colonies or attempted to found colonies at 64 locations in 2012. This is close to the highest number...

  17. Great cormorant (Phalacrocorax carbo predation on pikeperch (Sander lucioperca L. in shallow eutrophic lakes in Poland

    Directory of Open Access Journals (Sweden)

    Traczuk Piotr

    2017-06-01

    Full Text Available Increases in the population abundance of the piscivorous great cormorant (Phalacrocorax carbo has led to conflicts with fisheries. Cormorants are blamed for decreased fish catches in many lakes in Poland. The aim of this paper is to describe to role of pikeperch (Sander lucioperca in the diet of cormorants nesting in a colony on the island in Lake Warnołty. Since the breeding colony is located in the vicinity of Lake OEniardwy, the largest lake in Poland, the cormorants use the resources in this lake. In 2009-2016, 18,432 regurgitated fish were collected, of which 593 were pikeperch. The share of pikeperch among fish collected in 2009-2012 did not exceed 2%, but from 2013 this increased substantially to maximum of 38.2% in 2015. The smallest pikeperch had a standard length of 8.4 cm, and the largest 42.5 cm. Pikeperch mean length differed by year, and the length distribution was close to normal. The sizes of the regurgitated pikeperch indicate that cormorants prey almost exclusively on juvenile specimens. The results of the present study indicate that cormorant predation has a significant impact on pikeperch populations in lakes in the vicinity of the colony, and the great cormorants are possibly a significant factor in the effectiveness of pikeperch management. When planning for the management of fish populations in lakes subjected to cormorant predation pressure, it should be borne in mind that predation by this piscivorous bird species impacts the abundance and size-age structure of fish populations.

  18. Modelling the adaptive behaviour of migrating white storks

    NARCIS (Netherlands)

    Shamoun-Baranes, J.; van Loon, E.E.; Bouten, W.

    2006-01-01

    White storks (Ciconia ciconia) are soaring migrants whose western Palearctic populations use several migration routes, concentrating mainly over Gibraltar and Israel to cross between their Palearctic breeding grounds and wintering grounds in Africa. A wealth of data has been collected during the

  19. Impact of supplementary feeding on reproductive success of white storks.

    Directory of Open Access Journals (Sweden)

    Roland Hilgartner

    Full Text Available European white stork (Ciconia ciconia populations have been object to several conservation measures such as reintroduction programs, habitat improvement or supplementary feeding in the last decades. Although recent white stork censuses revealed an upward trend of most of the western populations, evaluations of the relative importance of certain conservation measures are still scarce or even lacking. In our study we analyzed the effect of supplementary feeding on the reproductive success of white storks in conjunction with other factors such as weather or nest site characteristics. We present data of 569 breeding events at 80 different nest sites located in variable distances to an artificial feeding site at Affenberg Salem (south-western Germany collected from 1990-2012. A multilevel Poisson regression revealed that in our study population (1 reproductive success was negatively affected by monthly precipitation in April, May and June, (2 pairs breeding on power poles had a lower reproductive success than pairs breeding on platforms or trees and (3 reproductive success was significantly higher in pairs breeding in close distance to the feeding site. The number of fledglings per nest decreased by 8% per kilometer distance to the feeding site. Our data suggest that supplementary feeding increases fledgling populations which may be a tool to attenuate population losses caused by factors such as habitat deterioration or unfavorable conditions in wintering habitats.

  20. [Wooly-necked stork, a new bird record of China].

    Science.gov (United States)

    Han, Lian-Xian; Han, Ben; Den, Zhang-Wen; Yu, Hong-Zhong; Zhao, Jian-Lin

    2011-10-01

    A new record species-the woolly-necked stork (Ciconia episcopus)-for China has been detected during a field survey of Shangri-La county, Diqing Tibetan autonomous prefecture, Yunnan province, June 10th, 2011. Ciconia episcopus is the least concern spices according to IUCN.

  1. Storks deliver new physics?

    CERN Multimedia

    CERN Bulletin

    2011-01-01

    On Thursday 15 September, a dozen storks spent the night on the roof of CERN's Building 60...   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-134/CERN-MOVIE-2011-134-0753-kbps-480x360-25-fps-audio-64-kbps-44-kHz-stereo', '', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-134/CERN-MOVIE-2011-134-posterframe-480x360-at-10-percent.jpg', '1384411', true, 'Video/Public/Movies/2011/CERN-MOVIE-2011-134/CERN-MOVIE-2011-134-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4');

  2. Diet shift of double-crested cormorants in eastern Lake Ontario associated with the expansion of the invasive round goby

    Science.gov (United States)

    Johnson, James H.; Ross, Robert M.; McCullough, Russell D.; Mathers, Alastair

    2010-01-01

    The proliferation of the invasive round goby (Apollonia melanostoma) in the Great Lakes has caused shifts in the trophic ecology in some areas. We examined the diet of double-crested cormorants (Phalacrocorax auritas) prior to, and immediately after, round goby population expansion at two colonies, Pigeon and Snake Islands, in eastern Lake Ontario from 1999 to 2007. Cormorant diet was determined from the examination of 10,167 pellets collected over the nine-year period. By the second year round gobies were found in the diet (2002 at Snake Island and 2003 at Pigeon Island) they were the main species consumed by cormorants at each colony. The dominance of round goby in cormorant diets had a significant effect on both daily fish consumption and seasonal trends in fish consumption compared to the pre-goby years. Seasonal differences that were observed during the pre-goby years were lost once gobies became the main diet component of cormorants. The rapid switch to a benthic prey such as round goby, from a largely limnetic fish diet demonstrates the adaptive foraging ability of cormorants. Round goby may act as a buffer for yellow perch and smallmouth bass, two sport fish impacted by cormorant predation in eastern Lake Ontario.

  3. Population and feeding ecology of the Marabou stork (Leptoptilos ...

    African Journals Online (AJOL)

    A study was carried out around Lake Ziway, covering both dry and wet seasons in ... They were observed to feed on food items such as fish scraps (41%), ... to the survival of the Marabou stork and other wetland birds of the present study area.

  4. The impact of Great Cormorants on biogenic pollution of land ecosystems: Stable isotope signatures in small mammals

    International Nuclear Information System (INIS)

    Balčiauskas, Linas; Skipitytė, Raminta; Jasiulionis, Marius; Trakimas, Giedrius; Balčiauskienė, Laima; Remeikis, Vidmantas

    2016-01-01

    Studying the isotopic composition of the hair of two rodent species trapped in the territories of Great Cormorant colonies, we aimed to show that Great Cormorants transfer biogens from aquatic ecosystems to terrestrial ecosystems, and that these substances reach small mammals through the trophic cascade, thus influencing the nutrient balance in the terrestrial ecosystem. Analysis of δ"1"3C and δ"1"5N was performed on two dominant species of small mammals, Apodemus flavicollis and Myodes glareolus, inhabiting the territories of the colonies. For both species, the values of δ"1"3C and δ"1"5N were higher in the animals trapped in the territories of the colonies than those in control territories. In the hair of A. flavicollis and M. glareolus, the highest values of δ"1"5N (16.31 ± 3.01‰ and 17.86 ± 2.76‰, respectively) were determined in those animals trapped in the biggest Great Cormorant colony. δ"1"5N values were age dependent, highest in adult A. flavicollis and M. glareolus and lowest in juvenile animals. For δ"1"3C values, age-dependent differences were not registered. δ"1"5N values in both small mammal species from the biggest Great Cormorant colony show direct dependence on the intensity of influence. Biogenic pollution is at its strongest in the territories of the colonies with nests, significantly diminishing in the ecotones of the colonies and further in the control zones, where the influence of birds is negligible. Thus, Great Cormorant colonies alter ecosystem functioning by enrichment with biogens, with stable isotope values in small mammals significantly higher in the affected territories. - Highlights: • Cormorants transport nutrients from water to land ecosystems and pollute biogenically. • We studied stable isotope composition of small mammal hair in 3 cormorant colonies. • δ"1"3C and δ"1"5N were measured using elemental analyzer–isotope ratio mass spectrometer. • δ"1"3C and δ"1"5N values were higher in rodents inhabiting

  5. The impact of Great Cormorants on biogenic pollution of land ecosystems: Stable isotope signatures in small mammals

    Energy Technology Data Exchange (ETDEWEB)

    Balčiauskas, Linas, E-mail: linasbal@ekoi.lt [Nature Research Centre, Akademijos 2, LT-08412 Vilnius (Lithuania); Skipitytė, Raminta, E-mail: raminta.skipityte@ftmc.lt [Nature Research Centre, Akademijos 2, LT-08412 Vilnius (Lithuania); Center for Physical Sciences and Technology, Savanorių 231, LT-02300 Vilnius (Lithuania); Jasiulionis, Marius, E-mail: mjasiulionis@ekoi.lt [Nature Research Centre, Akademijos 2, LT-08412 Vilnius (Lithuania); Trakimas, Giedrius, E-mail: giedrius.trakimas@gf.vu.lt [Center for Ecology and Environmental Research, Vilnius University, Vilnius (Lithuania); Institute of Life Sciences and Technology, Daugavpils University, Parades Str. 1a, Daugavpils, LV-5401 (Latvia); Balčiauskienė, Laima, E-mail: laiba@ekoi.lt [Nature Research Centre, Akademijos 2, LT-08412 Vilnius (Lithuania); Remeikis, Vidmantas, E-mail: vidrem@fi.lt [Center for Physical Sciences and Technology, Savanorių 231, LT-02300 Vilnius (Lithuania)

    2016-09-15

    Studying the isotopic composition of the hair of two rodent species trapped in the territories of Great Cormorant colonies, we aimed to show that Great Cormorants transfer biogens from aquatic ecosystems to terrestrial ecosystems, and that these substances reach small mammals through the trophic cascade, thus influencing the nutrient balance in the terrestrial ecosystem. Analysis of δ{sup 13}C and δ{sup 15}N was performed on two dominant species of small mammals, Apodemus flavicollis and Myodes glareolus, inhabiting the territories of the colonies. For both species, the values of δ{sup 13}C and δ{sup 15}N were higher in the animals trapped in the territories of the colonies than those in control territories. In the hair of A. flavicollis and M. glareolus, the highest values of δ{sup 15}N (16.31 ± 3.01‰ and 17.86 ± 2.76‰, respectively) were determined in those animals trapped in the biggest Great Cormorant colony. δ{sup 15}N values were age dependent, highest in adult A. flavicollis and M. glareolus and lowest in juvenile animals. For δ{sup 13}C values, age-dependent differences were not registered. δ{sup 15}N values in both small mammal species from the biggest Great Cormorant colony show direct dependence on the intensity of influence. Biogenic pollution is at its strongest in the territories of the colonies with nests, significantly diminishing in the ecotones of the colonies and further in the control zones, where the influence of birds is negligible. Thus, Great Cormorant colonies alter ecosystem functioning by enrichment with biogens, with stable isotope values in small mammals significantly higher in the affected territories. - Highlights: • Cormorants transport nutrients from water to land ecosystems and pollute biogenically. • We studied stable isotope composition of small mammal hair in 3 cormorant colonies. • δ{sup 13}C and δ{sup 15}N were measured using elemental analyzer–isotope ratio mass spectrometer. • δ{sup 13}C and

  6. Dispersal of juvenile Marabou Storks Leptoptilos crumeniferus as ...

    African Journals Online (AJOL)

    Just one of 35 chicks fitted with colour rings was resighted by December 2007, while 17 of 79 chicks fitted with patagial tags were resighted. Juvenile Marabou Storks can disperse over 1 500 km within their first year after fledging, sufficient to cover the large distances between breeding colonies. Ostrich 2008, 79(2): 187– ...

  7. Sandhill cranes browse for food near VAB

    Science.gov (United States)

    2000-01-01

    A family of sandhill cranes searches for food on the grounds near the Vehicle Assembly Building. The cranes have been a constant sight in the Launch Complex 39 area during the month of May. Sandhill cranes range from Siberia, Alaska and Arctic islands to Michigan, Minnesota and California; from Florida to Texas. They prefer large freshwater marshes, prairie ponds and marshy tundra. KSC shares a boundary with the Merritt Island National Wildlife Refuge, which encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects.

  8. Sandhill cranes hunting food at KSC

    Science.gov (United States)

    2000-01-01

    A pair of Sandhill Cranes searches for food with their still- fluffy fledgling close by. The trio have been seen wandering the grassy areas in the KSC Launch Complex 39 area. Sandhill cranes range from Siberia, Alaska and Arctic islands to Michigan, Minnesota and California; from Florida to Texas. They prefer large freshwater marshes, prairie ponds and marshy tundra. KSC shares a boundary with the Merritt Island National Wildlife Refuge, which encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects.

  9. KSC-04PD-0894

    Science.gov (United States)

    2004-01-01

    KENNEDY SPACE CENTER, FLA. White pelicans swim in a lake north of Kennedy Space Center. In the distance, at right, is a great blue heron. White pelicans winter from Florida and southern California south to Panama. Great blue herons range across the breadth of the United States, as well as north to Alaska and Canada and south to Mexico and the West Indies. The Center shares a boundary north, south and west with the 92,000-acre Merritt Island National Wildlife Refuge, which is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

  10. Diet composition and fish consumption of double-crested cormorants from three St. Lawrence River Colonies in 2013

    Science.gov (United States)

    Johnson, James H.; Farquhar, James F.; Mazzocchi, Irene M.; Bendig, Anne

    2014-01-01

    Double-crested Cormorants (Phalacrocorax auritus) were first observed nesting in the upper St. Lawrence River at Strachan Island in 1992. Cormorants now nest at a number of islands in the Thousand Islands section of the river. Griswold, McNair, and Strachan islands are among the largest colonies in the upper river. Until 2011, nest counts had remained relatively stable, ranging from 200 to 603 nests per colony. However, since 2011 the number of nests at McNair Island have exceeded 700 each year. Although the size of cormorant colonies in the upper St. Lawrence River is smaller than those in the eastern basin of Lake Ontario, the close proximity of islands in the upper river that have colonies may cause a cumulative fish consumption effect similar to a larger colony. Because of increasing numbers of Double-crested Cormorants in the upper St. Lawrence River and the possible effects on fish populations, studies were initiated in 1999 to quantify cormorant diet and fish consumption at the three largest colonies. From 1999 to 2012, these studies have shown that cormorants consumed about 128.6 million fish including 37.5 million yellow perch (Perca flavescens), 17.4 million rock bass (Ambloplites rupestris) and 1.0 million smallmouth bass (Micropterus dolemieu) (Johnson et al. 2012). During this same time period fish assessment studies near some of these islands have shown a major decrease in yellow perch populations (Klindt 2007). This occurrence is known as the halo effect and happens when piscivorous birds deplete local fish populations in areas immediately surrounding the colony (Ashmole 1963). This paper describes the diet and fish consumption of cormorants in the upper St. Lawrence River in 2013.

  11. Disrupted bone metabolism in contaminant-exposed white storks (Ciconia ciconia) in southwestern Spain

    International Nuclear Information System (INIS)

    Smits, Judit E.; Bortolotti, Gary R.; Baos, Raquel; Jovani, Roger; Tella, Jose L.; Hoffmann, Walter E.

    2007-01-01

    In 1998, the Aznalcollar mine tailings dyke in southwestern Spain broke, flooding the Agrio-Guadiamar river system with acid tailings up to the borders of one of the largest breeding colonies of white storks in the western Palearctic, Dehesa de Abajo. Over the following years, a high proportion of nestlings developed leg defects not seen before the spill, prompting this study. Nestlings with deformed legs had significantly lower plasma phosphorous (P) and higher Ca:P ratios than non-deformed cohorts in the first two years, but in the third year, when more, younger birds were studied, plasma P ranged from much higher to much lower in the affected colony compared with reference birds. Coefficients of variation for phosphorous were 19% and 60%, in reference and contaminated colonies, respectively. Storks from the contaminated colony were unable to control P levels and Ca:P ratios within the narrow limits necessary for normal bone development. - Since a large mine tailings spill near a stork colony in southwestern Spain, nestlings had leg deformities and could not control serum phosphorous levels and Ca:P ratios

  12. Disrupted bone metabolism in contaminant-exposed white storks (Ciconia ciconia) in southwestern Spain

    Energy Technology Data Exchange (ETDEWEB)

    Smits, Judit E. [Department of Veterinary Pathology, University of Saskatchewan, 52 Campus Drive, Saskatoon, SK S7N 5B4 (Canada)]. E-mail: judit.smits@usask.ca; Bortolotti, Gary R. [Department of Biology, University of Saskatchewan, Saskatoon, 52 Campus Drive, SK S7N 5B4 (Canada)]. E-mail: gary.bortolotti@usask.ca; Baos, Raquel [Estacion Biologica de Donana, C.S.I.C., 41013 Sevilla (Spain)]. E-mail: raquel@ebd.csic.es; Jovani, Roger [Estacion Biologica de Donana, C.S.I.C., 41013 Sevilla (Spain); Tella, Jose L. [Estacion Biologica de Donana, C.S.I.C., 41013 Sevilla (Spain); Hoffmann, Walter E. [University of Illinois, College of Veterinary Medicine, Champagne-Urbana, IL (United States)]. E-mail: wally@uiuc.edu

    2007-01-15

    In 1998, the Aznalcollar mine tailings dyke in southwestern Spain broke, flooding the Agrio-Guadiamar river system with acid tailings up to the borders of one of the largest breeding colonies of white storks in the western Palearctic, Dehesa de Abajo. Over the following years, a high proportion of nestlings developed leg defects not seen before the spill, prompting this study. Nestlings with deformed legs had significantly lower plasma phosphorous (P) and higher Ca:P ratios than non-deformed cohorts in the first two years, but in the third year, when more, younger birds were studied, plasma P ranged from much higher to much lower in the affected colony compared with reference birds. Coefficients of variation for phosphorous were 19% and 60%, in reference and contaminated colonies, respectively. Storks from the contaminated colony were unable to control P levels and Ca:P ratios within the narrow limits necessary for normal bone development. - Since a large mine tailings spill near a stork colony in southwestern Spain, nestlings had leg deformities and could not control serum phosphorous levels and Ca:P ratios.

  13. Great cormorants ( Phalacrocorax carbo) can detect auditory cues while diving

    Science.gov (United States)

    Hansen, Kirstin Anderson; Maxwell, Alyssa; Siebert, Ursula; Larsen, Ole Næsbye; Wahlberg, Magnus

    2017-06-01

    In-air hearing in birds has been thoroughly investigated. Sound provides birds with auditory information for species and individual recognition from their complex vocalizations, as well as cues while foraging and for avoiding predators. Some 10% of existing species of birds obtain their food under the water surface. Whether some of these birds make use of acoustic cues while underwater is unknown. An interesting species in this respect is the great cormorant ( Phalacrocorax carbo), being one of the most effective marine predators and relying on the aquatic environment for food year round. Here, its underwater hearing abilities were investigated using psychophysics, where the bird learned to detect the presence or absence of a tone while submerged. The greatest sensitivity was found at 2 kHz, with an underwater hearing threshold of 71 dB re 1 μPa rms. The great cormorant is better at hearing underwater than expected, and the hearing thresholds are comparable to seals and toothed whales in the frequency band 1-4 kHz. This opens up the possibility of cormorants and other aquatic birds having special adaptations for underwater hearing and making use of underwater acoustic cues from, e.g., conspecifics, their surroundings, as well as prey and predators.

  14. Migration routes and staging areas of Abdim's Storks Ciconia ...

    African Journals Online (AJOL)

    This paper presents the results of a satellite tracking study of seven adult Abdim's Storks Ciconia abdimii that were followed from the nesting areas in southern Niger across the equator to the non-breeding range and back. Post-breeding migration started between early November and early December when all birds ...

  15. Roosting Colony of Cormorants (Phalacrocorax Carbo Sinensis L. as a Source of Nutrients for the Lake

    Directory of Open Access Journals (Sweden)

    Piotr Klimaszyk

    2015-03-01

    Full Text Available Since 2005, great cormorants have been observed on the Lake Góreckie (Wielkopolski National Park shoreline. The population of these birds occurring within the lake has gradually increased. In autumn 2008, more than 100 individuals were observed. In the period 2009-2012 the number of birds occupying the island periodically exceeded 250 individuals. So far, there is no breeding colony of great cormorants, but the birds have established a roosting colony on the island. In the period 2009-2012 we conducted research on the impact of the colony of great cormorants on the accumulation of nitrogen, phosphorus and other elements in soils beneath the colony and transfer of chemical elements from the colony to a nearby freshwater ecosystem. Our results show that a relatively small and recent colony of great cormorants can significantly affect the chemistry of soil. Compared to a control, the soil beneath the colony was characterized by statistically higher concentrations of nitrogen and phosphorus. A significant accumulation of nutrients was observed in the topsoil zone (to a depth of about 20 cm. Enrichment of soil in chemical elements has resulted in their further transport to a nearby lake. Compared to the control, the groundwater and surface runoff from the colony area revealed several-fold higher concentrations of nitrogen and phosphorus. The maximum abundance of cormorants in the roosting colony was reflected in the elevated concentrations of nitrogen and phosphorus in the littoral water near the colony. Our study demonstrates that the roosting colony of great cormorants can play a significant role in accelerating the eutrophication of surface waters.

  16. Diet and foraging habitats of non-breeding white storks (Ciconia ciconia in Bulgaria

    Directory of Open Access Journals (Sweden)

    Milchev Boyan

    2013-01-01

    Full Text Available The diet of non-breeding White Storks was studied by pellet analysis and included mainly insects (99.9%, n=28947 with a predominance of grasshoppers (Orthoptera, 76.1%, and beetles (Coleoptera, 26.1%. The bush crickets Decticus albifrons/verrucivorus were the most numerous prey (29.9% by items, occurring in almost all pellets (98% occurrence in pellets, n=147 and predominating in half of them (49.7%. The grasshopper associations in the pellets specify foraging mainly in mesophytic grasslands that usually replace abandoned fields and overgrown pastures with a low level of grazing. The xerophytic grass-shrubby habitats, not rare on stony terrains, were of less importance, providing around 20% by prey. The typical aquatic inhabitants and the use of carrion around villages were exceptions in the study diet. The number of innutritious materials in the pellets rose when the White Storks hunted on nippy and agile grasshoppers and decreased when the main pray was slower beetles taken from the ground. The roosting of non-breeding White Storks disappeared when their preferred feeding habitats were ploughed up in the following years.

  17. Little Galloo Island, Lake Ontario: A review of nine years of double-crested cormorant diet and fish consumption information

    Science.gov (United States)

    Johnson, James H.; Ross, Robert M.; McCullough, Russ D.

    2002-01-01

    The diet of double-crested cormorants (Phalacrocorax auritus) on Little Galloo Island (LGI) in the eastern basin of Lake Ontario has been quantified since 1992. Over the past nine years considerable information has been generated on cormorant feeding ecology through the examination of approximately 12,000 pellets collected on LGI, where three distinct cormorant feeding periods, pre-chick, chick, and post-chick, are delineated by differences in diet composition and daily fish consumption. Yellow perch (Perca flavescens) were the major prey during pre-chick and post-chick feeding periods. Alewife (Alosa pseudoharengus), which move inshore to spawn in mid-June, dominated (>60%) cormorant diets during the chick feeding period. Mean daily fish consumption (14.6) during the pre-chick feeding period was significantly greater than during the chick feeding (9.3) or post-chick feeding (8.0) periods. The proportion of smallmouth bass (Micropterus dolomieu) in the diet increased over the season (0.8% to 7.2%), while the size of bass consumed declined (214 mm to 143 mm). Forage fish (mainly alewife, three-spine sticklebacks [Gasterosteus aculeatus] and minnows) comprised 58% of the diet of LGI cormorants, followed by panfish (37%) (yellow perch, pumpkinseed [Lepomis gibbosus], rock bass [Ambloplites rupestris]) and gamefish (5%) (mostly smallmouth bass). On the average LGI cormorants consumed about 32.8 million fish annually, weighing about 1.4 million kilograms. Cormorants from LGI consumed more biomass of smallmouth bass and yellow perch annually than is taken by sport (bass and yellow perch) and commercial (perch) fishermen.

  18. Post-Mating Sexual Behaviors of Oriental Storks (Ciconia boyciana) in Captivity.

    Science.gov (United States)

    Yoon, Jongmin; Ha, Hae-Sook; Jung, Jung-Shim; Park, Shi-Ryong

    2015-08-01

    Parental behaviors that vary by sex and breeding stage facilitate the survival of offspring in birds. Females invest in reproducing according to the level of direct and/or indirect benefits provided by males. Males face trade-offs from defending territories or nests, providing for the young, and seeking additional mating opportunities. We examined whether post-mating sexual behaviors such as courtship display and nest-building were associated with reproductive investments made by males and females in the current study. The oriental stork (Ciconia boyciana) is known as a solitary breeder that nests in tall trees and provides biparental care with long post-hatching development. We filmed parental behaviors in seven stork pairs in captivity for 655 hours (245 hours during nest-building, 218 hours during incubation, 328 hours during nestling, and 192 hours during the fledgling period). We found that paired mating behaviors such as synchronous allopreening and bill-clattering were highly skewed to the pre-incubation period. Males participated in nest-building more than females although both sexes shared similar parental care during the incubation and nestling period. Male nest-building was negatively correlated with male nest attentiveness only during the nestling period. Our results suggest that male oriental storks with higher nest-building effort might spend more time taking precautions against conspecific intruders or nest predators near the nests with chicks while the females were attending the nests in the form of biparental care.

  19. Nesting of Great Cormorants (Phalacrocorax carbo on man-made structures in Ukraine

    Directory of Open Access Journals (Sweden)

    A. I. Sidorenko

    2016-07-01

    Full Text Available In Ukraine the Great Cormorant (Phalacrocorax carbo Linnaeus, 1758 uses a rather wide range of habitats for nesting: islands, trees and shrubs, reedbeds and a variety of man-made structures. In general, the strategy of nesting on man-made structures is uncommon both in Ukraine and Europe, and Cormorantsdo this only in the absence of other sites suitable for nesting. Special research onCormorant colonies on technogenic constructions was carried out during the field expeditions by the Research Institute of Biodiversity of Terrestrial and Aquatic Ecosystems of Ukraine in 2002–2003 and 2012–2016. Besides this, we used retrospective and current data from the literature and Internet resources. Most of the field work was carried out by making surveys by boat and on foot. As a result, we found 8 Cormorant colonies on technogenic constructions in Ukraine: gas platforms in the Sea of Azov (near the village Strilkove, Henichesk district of Kherson region; sunken ships – targets for bombing training near the Arabat Spit (these are also known as «ship islands»; electricity pylons of the high-voltage Enerhodar Dnipro Power Line where it crosses the Kakhovka Reservoir; the dock in Yahorlyk Bayk, used in the past as a target for bombing training bombing; artificial island-platforms on Lake Chernine (Kinburn Peninsula; an artificial island on the Sasyk Lagoon (Odessa region; artificial islands, made as navigation markers on the Kremenchuk and Kiev reservoirs. The study found that in most cases the accompanying species was the CaspianGull (Larus cachinnans Pallas, 1811, which actively destroys the Cormorants’ nests and eats their eggs and chicks. The number of nests in the colonies varied greatly (5–30 nests on the navigation marker islands and ca. 2 000–2 300 on the «ship-islands» and gas platforms. This is due, primarily, to the area of the breeding territory. The research found that fierce territorial competition was observed in most of the

  20. Identification of hybrids of painted and milky storks using FTA card-collected blood, molecular markers, and morphologies.

    Science.gov (United States)

    Yee, Elsie Yoke Sim; Zainuddin, Zainal Zahari; Ismail, Ahmad; Yap, Chee Kong; Tan, Soon Guan

    2013-10-01

    Suspicious hybrids of painted storks and milky storks were found in a Malaysian zoo. Blood of these birds was sampled on FTA cards for DNA fingerprinting. Of 44 optimized primers, 6 produced diagnostic markers that could identify hybrids. The markers were based on simple, direct PCR-generated multilocus banding patterns that provided two sets of genetic data, one for each of the two stork species and another for the hybrids. It also revealed that large DNA fragments (3,000 bp) could be amplified from blood collected on FTA cards. When the results of each individual bird's DNA fingerprint were compared with plumage characters, the hybrids were found to express a range of intermediate phenotypic traits of the pure breeds with no dominant plumage characteristic from either parental species.

  1. Industrial, agricultural, and petroleum contaminants in cormorants wintering near the Houston Ship Channel, Texas, USA

    Science.gov (United States)

    King, K.A.; Stafford, C.J.; Cain, B.W.; Mueller, A.J.; Hall, H.D.

    1987-01-01

    Double-crested cormorants (Phalacrocorax auritus ) collected in the Houston Ship Channel, Texas, USA, in November shortly after their fall migration contained residues of several industrial, agricultural, and petroleum contaminants including polychlorinated styrenes (PCS's), polychlorinated biphenyls (PCB's), DDE, and petroleum hydrocarbons. PCS concentrations in over-wintering birds collected in late February were three times higher than those in birds collected in November. PCB and petroleum concentrations remained at about the same level throughout the 3-month winter period. Petroleum hydrocarbons were present in all cormorants and residues in some individuals exceeded 25 ppm (wet weight). Mean DDE residues in samples collected in November and February were less than 1 ppm. Low concentrations of five other organochlorine compounds, not detected in cormorants collected in November, were recovered in birds collected in February.

  2. Ringing of White Storks Ciconia ciconia in NE Slovenia during the 1984–2013 period

    Directory of Open Access Journals (Sweden)

    Bračko Franc

    2016-12-01

    Full Text Available In a period of 30 years (1984-2013, 1,535 White Stork pulli were ringed on nest and 1,226 nests examined in NE Slovenia. The ringing was implemented in the regions of Dravsko polje, Slovenske gorice and Pomurje. In each season, from 9 to 85 nests were examined, the great majority of them built on overhead powerline pylons. On average, 51.16 pulli or 16.66% were ringed and 40.86 or 18.91% nests visited compared to the census of fledged pulli and inventoried nests in 1999 in NE Slovenia. A total of 71 finds or 4.6% were registered and 37 rings or 52% finds read. There were 26 (36.62% local recoveries, while in foreign countries 34 (47.88% recoveries of Slovenian-ringed storks were made. Two of our recoveries were registered abroad prior to 1984. There were 11 (15.49% foreign recoveries. Local recoveries (n = 26 indicate breeding relationship (mixing between the eastern and southern Slovenian breeding populations. The longest distance of breeding was 115 km in a beeline, the shortest 62 km (n = 4. Other 12 local recoveries at 1 to 38 km from the place of hatching concerns the native NE breeding area. Young sexually mature storks search for new breeding sites only in their fourth year of age. No ringed stork returned to the native nest as a young breeder. The oldest was 14 years old. Some of them breed in the wider area of the Pannonian Plain outside Slovenia, e.g. 3 in Austria, 2 in Serbia and 1 in Croatia. One of them bred in Slovakia 463 km away. In view of the presented recoveries it has been ascertained that the storks from NE Slovenia migrate across the Pannonian Plain, the Balkans and Asia Minor, down to the South African Republic of 8,923 km in a beeline (4 recoveries, using the eastern migration route. The western migration route was not ascertained. The majority of recoveries originated from the autumn migration period, with only one recovery known from the spring migration period. No less than 23 ringed storks, particularly young ones

  3. A Roseate Spoonbill hunts for food in the water.

    Science.gov (United States)

    1999-01-01

    A Roseate Spoonbill sweeps the water for food in the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. The brilliant pink bird is named for its straight bill with the broad spatulate tip. Preferring a habitat of mangroves, it is usually found on the coasts of southern Florida and Texas, occasionally in Louisiana., in the West Indies, Mexico and Central and South America. Spoonbills feed on shrimps and fish in shallow waters, sweeping their bills from side to side and scooping up whatever they encounter. The 92,000- acre refuge is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

  4. Using heronry birds to monitor urbanization impacts: a case study of painted stork Mycteria leucocephala nesting in the Delhi Zoo, India.

    Science.gov (United States)

    Urfi, Abdul Jamil

    2010-03-01

    Although urbanization is a frequently cited cause of biodiversity loss (Czech and Krausman 1997) our understanding about urban ecology is severely limited (Marzluff et al. 2001). Birds are popular bio-indicators of environmental change because they are ecologically versatile, their populations as well as select fitness parameters can be conveniently monitored, often with the voluntary involvement of local nature enthusiasts across large geographical scales, and their presence/absence in a particular area is consequential (Bibby et al. 1992; Urfi 2004). In India, while several studies have focused on changes in bird populations and distributions in natural habitats (Urfi et al. 2005), very few have actually attempted to study either the impacts of urbanization on birds or how different species have adjusted to environmental change. However, many Indian cities offer foraging and nesting habitat for birds, especially colonial waterbirds such as stork, ibis, spoonbill, heron, egret, cormorant, and spoonbill. Some notable examples in this regard are Piele Gardens in Bhavnagar city (Parasharya and Naik 1990), Karanji Tank in Mysore (Jamgaonkar et al. 1994) and the National Zoological Park (hence forth Delhi Zoo) in India's capital city New Delhi (Urfi 1997). In this article, I focus on the opportunities for meaningful ecological research offered by the wild waterbirds nesting in the Delhi Zoo premises and discuss the significance for initiating novel, long term conservation monitoring programs, involving volunteers and bird watchers, to create data bases that will be useful for understanding urbanization and climate change impacts on biodiversity.

  5. Data concerning the epidemiological characteristics in the helminth infestations of the Danube Delta’s cormorant populations

    Directory of Open Access Journals (Sweden)

    RĂILEANU Ştefan

    2007-10-01

    Full Text Available This study is focused on the elucidation of some aspects regarding the endo- and ecoparasite fauna specific for the Danube Delta’s cormorants. The researches on the two species of cormorants (Phalacrocorax carbo and Phalacrocorax pygmaeus had as main purpose the specification of the helmitofauna’s etiology, epidemiology and micro- ecology present to the 2 studied species.

  6. The importance of Northern Dobrogea in the migration of Great Cormorant (Phalacrocorax carbo

    Directory of Open Access Journals (Sweden)

    SÁNDOR D. Attila

    2009-09-01

    Full Text Available The Great Cormorants breeding and migrating through Dobrogea belong to the Phalacrocorax carbo sinensis subspecies. It is the subspecies with the most migratory populations out of the 12 subspecies ofGreat Cormorant. The species is in expansion in most regions of Europe, the P. c. sinensis subspecies’ range is expanding the most. In Romania both the number of colonies and their size have increased since 1990. The observed increase was too fast to be based only on the reproduction rate of the original local population. We suspect that a certain degree of the increase is fuelled by cormorants originating from other populations. Out of 667 cormorants ringedduring their nesting period in the Danube Delta 11 (1.64 % were recovered, while there are 15 recoveries of this speciesringed in other countries and recaptured in Dobrogea. Most of the birds ringed in the Danube Delta migrate South, being recovered in Bulgaria (in late summer or autumn and Turkey (in winter, with one out of the range record of a bird observed in the UK. The recoveries from abroad originated from either countries around the Baltic Sea (Denmark, Estonia or from Southern Ukraine and Russia. These recoveries date from autumn (mostly October and November and spring months, with one record in December and January each. As a conclusion, we state that there is a possibility that the population increase is fuelled by immigrant birds, but this assumption should be tested by a large scale capture-recapture study, based on colorringing.

  7. Testing auditory sensitivity in the great cormorant (Phalacrocorax carbo sinensis)

    DEFF Research Database (Denmark)

    Maxwell, Alyssa; Hansen, Kirstin Anderson; Larsen, Ole Næsbye

    2016-01-01

    Psychoacoustic and electrophysiological methods were used to measure the in-air hearing sensitivity of the great cormorant (Phalacrocorax carbo sinensis). One individual was used to determine the behavioral thresholds, which was then compared to previously collected data on the auditory brainstem...

  8. Evidence for foraging -site fidelity and individual foraging behavior of pelagic cormorants rearing chicks in the gulf of Alaska

    Science.gov (United States)

    Kotzerka, J.; Hatch, Shyla A.; Garthe, S.

    2011-01-01

    The Pelagic Cormorant (Phalacrocorax pelagicus) is the most widespread cormorant in the North Pacific, but little is known about its foraging and diving behavior. However, knowledge of seabirds' foraging behavior is important to understanding their function in the marine environment. In 2006, using GPS dataloggers, we studied the foraging behavior of 14 male Pelagic Cormorants rearing chicks on Middleton Island, Alaska. For foraging, the birds had high fidelity to a small area 8 km north of the colony. Within that area, the cormorants' diving activity was of two distinct kinds-near-surface dives (1-6 m) and benthic dives (28-33 m). Individuals were consistent in the depths of their dives, either mostly shallow or mostly deep. Few showed no depth preference. Dive duration, time at maximum depth, and pauses at the water surface between consecutive dives were shorter for shallow dives than for deep dives. The cormorants made dives of both types throughout the day, but the frequency of deep dives increased toward evening. Maximum foraging range was 9 km; maximum total distance traveled per trip was 43.4 km. Trip durations ranged from 0.3 to 7.7 hr. Maximum depth of a dive was 42.2 m, and duration of dives ranged from 4 to 120 sec. We found that Pelagic Cormorants at Middleton Island were faithful to one particular foraging area and individuals dived in distinct patterns. Distinct, specialized foraging behavior may be advantageous in reducing intra- and interspecific competition but may also render the species vulnerable to changing environmental conditions. Copyright ?? The Cooper Ornithological Society 2011.

  9. Stennis visits Lake Cormorant school

    Science.gov (United States)

    2010-01-01

    Alexis Harry, assistant director of Astro Camp at NASA's John C. Stennis Space Center, talks with students at Lake Cormorant (Miss.) Elementary School during a 'Living and Working in Space' presentation March 30. Stennis hosted the school presentation during a visit to the Oxford area. Harry, who also is a high school biology teacher in Slidell, La., spent time discussing space travel with students and answering questions they had about the experience, including queries about how astronauts eat, sleep and drink in space. The presentation was sponsored by the NASA Office of External Affairs and Education at Stennis. For more information about NASA education initiatives, visit: http://education.ssc.nasa.gov/.

  10. Use of wildlife rehabilitation centres in pathogen surveillance: A case study in white storks (Ciconia ciconia).

    Science.gov (United States)

    Camacho, MariaCruz; Hernández, Jose Manuel; Lima-Barbero, Jose Francisco; Höfle, Ursula

    2016-08-01

    More than 70% of new human pathogens are zoonotic and many originate from the wildlife reservoir. Wildlife rehabilitation centres (WRC) are an easily accessible source for sample and data collection for preventive surveillance, but data collected this way may be biased. We use white storks (Ciconia ciconia) as a model to compare pathogen prevalence obtained in the field and WRC. We address factors that may affect disease prevalence data like origin, the age group and the "diseased" state of WRC admissions. In this study we compared prevalence of Escherichia coli and Salmonella spp. in the digestive tract; antibodies against West Nile virus, avian influenza and Newcastle disease virus, and antimicrobial resistance patterns of E. coli between nestling and adult wild storks established in different habitats (n=90) and storks admitted to two different WRC (n=30) in the same region. When age groups and colonies of origin were disregarded, the mean enterobacteria (E. coli, Salmonella) and viral antibody prevalence of the wild population (n=90) were similar to prevalence observed in the individuals admitted to WRC (n=30). However, in fledgling juvenile storks admitted to WRC, the prevalence of Salmonella spp. (13.3%), E. coli showing resistance to cefotaxime (37.9%) and against two antimicrobials at once (41.4%) were more similar to the prevalence in stork nestlings from landfill-associated colonies (7.9%, 37.1% and 48.6%, respectively for prevalence of Salmonella spp. and E. coli displaying, cefotaxime resistance and resistance against two antimicrobials), and significantly higher than in colonies located in natural habitats (0%; 10.5% and 15.8%, respectively). Thus, pathogen surveillance in individuals from an abundant species admitted to WRC is useful to monitor overall mean prevalence, but for certain pathogens may not be sufficient to detect differences between local populations. In addition, the ecology of the tested species and the specific temporal, spatial and

  11. A hard-knock life: the foraging ecology of Cape cormorants amidst ...

    African Journals Online (AJOL)

    A hard-knock life: the foraging ecology of Cape cormorants amidst shifting prey resources and industrial fishing pressure. MH Hamann, D Grémillet, PG Ryan, F Bonadonna, CD van der Lingen, L Pichegru ...

  12. Genetic characterization of Neotropical Jabiru Storks: Insights for conservation

    Science.gov (United States)

    Lopes, I.F.; Haig, S.M.; Lama, S.N.D.

    2010-01-01

    Jabiru Stork (Jabiru mycteria is listed under Appendix I of CITES and considered threatened in Central America. The first population genetic analysis of Jabiru Storks was carried out using mitochondrial DNA (mtDNA) control region sequences (520 bp) and five heterologous microsatellite loci. Samples were collected from the field (N = 49) and museum skins (N = 22) in Central (mainly Belize, Nicaragua and Costa Rica) and South America (Colombia, Venezuela, Peru and Brazil). A decline of mtDNA diversity was observed in comparisons between past (N = 20) and present (N = 40) samples collected in Central America and northern South America. Similar levels of microsatellite loci diversity were observed among contemporary samples. Lower levels of mtDNA variability were observed in samples from Central America and northern South America when compared to the Brazilian Pantanal region. Significant levels of genetic differentiation were found between contemporary locations sampled, whereas non-significant results were observed for historic samples. The non-geographic association of haplotypes observed at the cladograms and the recent divergence times estimated between locations are indicative of an evolutionary history of a large population size with limited population structure. Reconnection of populations via increased gene flow, particularly in Central America, is recommended if genetic structure and status are to be restored.

  13. Predicting Migratory Corridors of White Storks, Ciconia ciconia, to Enhance Sustainable Wind Energy Planning: A Data-Driven Agent-Based Model

    Directory of Open Access Journals (Sweden)

    Francis Oloo

    2018-05-01

    Full Text Available White storks (Ciconia ciconia are birds that make annual long-distance migration flights from their breeding grounds in the Northern Hemisphere to the south of Africa. These trips take place in the winter season, when the temperatures in the North fall and food supply drops. White storks, because of their large size, depend on the wind, thermals, and orographic characteristics of the environment in order to minimize their energy expenditure during flight. In particular, the birds adopt a soaring behavior in landscapes where the thermal uplift and orographic updrafts are conducive. By attaining suitable soaring heights, the birds then use the wind characteristics to glide for hundreds of kilometers. It is therefore expected that white storks would prefer landscapes that are characterized by suitable wind and thermal characteristics, which promote the soaring and gliding behaviors. However, these same landscapes are also potential sites for large-scale wind energy generation. In this study, we used the observed data of the white stork movement trajectories to specify a data-driven agent-based model, which simulates flight behavior of the white storks in a dynamic environment. The data on the wind characteristics and thermal uplift are dynamically changed on a daily basis so as to mimic the scenarios that the observed birds experienced during flight. The flight corridors that emerge from the simulated flights are then combined with the predicted surface on the wind energy potential, in order to highlight the potential risk of collision between the migratory white storks and hypothetical wind farms in the locations that are suitable for wind energy developments. This work provides methods that can be adopted to assess the overlap between wind energy potential and migratory corridors of the migration of birds. This can contribute to achieving sustainable trade-offs between wind energy development and conservation of wildlife and, hence, handling the

  14. APPLICATION OF THE GREAT CORMORANT'S (Phalacrocorax carbo sinensis DAILY MEAL IN THE STIMATION OF DAMAGES AT FISHPONDS

    Directory of Open Access Journals (Sweden)

    Anđelko Opačak

    2004-03-01

    Full Text Available Daily meal of the Great Cormorant (Phalacrocorax carbo sinensis, joined with the number of birds and composition of fish in the meal, has high importance in total calculation of damage-costs on fish stock. The weight of fish in daily meal is regarding as the world-wide indicator for the estimation of damages. Various methods are being developed for the reliable estimation of daily fish quantity that Cormorant consummate. Diversity of the applied methods lead to variability of the results. This paper presents the estimation results from 24 studies. Daily meal of the Great Cormorant determined by the stomach content analysis is 359.5 g in average per bird (n=3 study reports; by the pellets analysis 347 g (n=10 is determined, and mean weight values of regurgitated fish was 384 g (n=2. Analyses of the nourished, captured birds (n=4 show 371 g mean value of daily meal while the stomach temperature method show 336 g (n=1 study. The energy requirement methods determined daily meal of 596 g (n=1, a study dealing on the empirical basal metabolism measurements, and 751 g (n=3, studies dealing on daily energetic requirements of the Great Cormorant.

  15. Variation in White Stork ( Ciconia ciconia) diet along a climatic gradient and across rural-to-urban landscapes in North Africa

    Science.gov (United States)

    Chenchouni, Haroun

    2017-03-01

    Assessing diet composition of White Storks ( Ciconia ciconia) breeding under North African conditions provides key information to understanding its trophic niche for conservation purpose. Since, climate controls productivities of foraging habitats and thus food availability for predators, this study examines how Storks' diet parameters varied following a climate gradient along with rural-to-urban landscapes in north-eastern Algeria. Feeding strategies to cope with severe conditions were discussed in light of climate aridity and urbanization and how these influence reproduction, population dynamics and distribution. While invertebrate prey accounted for 94 % of ingested individuals, the biomass intake was dominated by chicken remains scavenged from rubbish dumps (67 %) and small mammals (14 %). Generalized linear models revealed that prey numbers varied significantly between climatic regions and landscapes types, but no significant differences were observed for other dietary parameters, including prey biomass. The study showed high dietary similarity between study climates and landscapes, mainly among rural and urban colonies located in semi-arid and sub-humid areas, which differed from those in suburban and arid climate. Rarefaction and extrapolation curves indicated that prey species richness in White Stork diets was expected to be higher in urban colonies located in sub-humid climate. Despite low prey species diversity in arid regions, the White Stork demonstrates a broad trophic niche, which could be due to supplementary feeding from human refuse. This study suggests that regardless of the climate or landscape, White Storks ensure a constant food intake, despite prey biomass fluctuations, by adapting their diet. Foraging in diverse habitats, including trash dumps, ensures a sufficiently balanced diet to meet nutritional requirements.

  16. Isolation and characterization of eight novel microsatellite loci in the double-crested cormorant (Phalacrocorax auritus)

    Science.gov (United States)

    Mercer, Dacey; Haig, Susan; Mullins, Thomas

    2010-01-01

    We describe the isolation and characterization of eight microsatellite loci from the double-crested cormorant (Phalacrocorax auritus). Genetic variability was assessed using 60 individuals from three populations. All loci were variable with the number of alleles ranging from two to 17 per locus, and observed heterozygosity varying from 0.05 to 0.89. No loci showed signs of linkage disequilibrium and all loci conformed to Hardy–Weinberg equilibrium frequencies. Further, all loci amplified and were polymorphic in two related Phalacrocorax species. These loci should prove useful for population genetic studies of the double-crested cormorant and other pelecaniform species.

  17. Dynamic Responses in a Plant-Insect System to Fertilization by Cormorant Feces

    Directory of Open Access Journals (Sweden)

    Gundula Kolb

    2015-04-01

    Full Text Available Theoretical arguments suggest that increased plant productivity may not only increase consumer densities but also their fluctuations. While increased consumer densities are commonly observed in fertilization experiments, experiments are seldom performed at a spatial and temporal scale where effects on population fluctuations may be observed. In this study we used a natural gradient in soil fertility caused by cormorant nesting. Cormorants feed on fish but defecate on their nesting islands. On these islands we studied soil nutrient availability, plant nutrient content and the density of Galerucella beetles, main herbivores feeding on Lythrum salicaria. In a common garden experiment, we followed larval development on fertilized plants and estimated larval stoichiometry. Soil nutrient availability varied among islands, and several cormorant islands had very high N and P soil content. Plant nutrient content, however, did not vary among islands, and there was no correlation between soil and plant nutrient contents. Beetle densities increased with plant nutrient content in the field study. However, there was either no effect on temporal fluctuations in beetle density or that temporal fluctuations decreased (at high P. In the common garden experiment, we found limited responses in either larval survival or pupal weights to fertilization. A possible mechanism for the limited effect of fertilization on density fluctuations may be that the distribution of L. salicaria on nesting islands was restricted to sites with a lower N and P content, presumably because high N loads are toxic.

  18. Agency interaction at the Savannah River Plant under the Endangered Species Act

    International Nuclear Information System (INIS)

    Mackey, H.E. Jr.

    1985-01-01

    The 300 square mile Savannah River Plant (SRP) offers a variety of protected habitats for endangered species including the alligator (resident), red-cockaded woodpecker (resident), short-nose sturgeon (migratory), and wood stork (fish-forager). The most recent of these four species to be listed by the US Fish and Wildlife Service (US FWS) is the wood stork. It had been observed prior to 1983 as an infrequent forager in the SRP Savannah River Swamp which adjoins SRP on the south and southwest. In anticipation of its listing as an endangered species, DOE-SR requested in the spring of 1983 that the Savannah River Ecology Laboratory, University of Georgia, conduct field surveys and studies of the nearest colony of wood storks to SRP (the Birdsville colony in north-central Georgia). The objective of these studies was to determine potential effects of the flooding of the Steel Creek swamp area with cooling water from L-Reactor. L-Reactor, which is proposed for restart, has not been operated since 1968. The survey found that wood storks forage in the Steel Creek delta swamp area of the Savannah River at SRP. Based on the numbers of storks at various foraging locations, sites at SRP ranked higher than non-SRP sites during the pre-fledging phase of the colony. Cold flow testing of L-Reactor also demonstrated that foraging sites in the Steel Creek delta would be unavailable during L-Reactor operation because of increased water levels

  19. An anhinga shows its iridescent plumage

    Science.gov (United States)

    2000-01-01

    The greenish iridescence of a male Anhinga nearly blends into the green vegetation behind it on the grounds of the Kennedy Space Center. The mostly black-bodied bird is also known as a 'snakebird' because, when swimming, only its head and long, slender neck are visible above water. The anhinga inhabits freshwater ponds and swamps with thick vegetation and ranges the Atlantic and Gulf coasts from North Carolina to Texas, the Mississippi Valley north to Arkansas and Tennessee, and south to southern South America. The Center shares a boundary with the Merritt Island National Wildlife Refuge, which encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects.

  20. A white pelican and egrets in the Merritt Island National Wildlife Refuge

    Science.gov (United States)

    1999-01-01

    A white pelican and several small egrets rest on the bank of a pond in in the waters of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. White pelicans inhabit marshy lakes and along the Pacific and Texas coasts. They winter from Florida and southern California south to Panama, chiefly in coastal lagoons. They are frequently seen flying in long lines, flapping and sailing in unison, but also ride rising air currents to soar gracefully in circles. The range of the egret includes southern and eastern states, Mexico, Central and South America, and the West Indies. The Refuge encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects.

  1. Black-necked stilts share nesting in the Merritt Island National Wildlife Refuge

    Science.gov (United States)

    1999-01-01

    A black-necked stilt waits near its nesting mate nest in the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Stilts usually produce three or four brown-spotted buff eggs in a shallow depression lined with grass or shell fragments. In the nesting season they are particularly agressive. Stilts are identified by a distinct head pattern of black and white, very long red legs, and straight, very thin bill. Their habitat is salt marshes and shallow coastal bays from Delaware and northern South America in the East, and freshwater marshes from Oregon and Saskatchewan to the Gulf Coast. The 92,000-acre wildlife refuge is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

  2. Cathaemasia hians infection in Black stork in Slovakia: morphological and histopathological study

    Directory of Open Access Journals (Sweden)

    Königová A.

    2015-12-01

    Full Text Available Cathaemasia hians is an obligate trematode parasite of Black storks that are on the List of protected birds in Europe. In the present study, adult trematodes were isolated from the Black stork post mortem and morphological study revealed C. hians species. In total, 10 worms were found in the oesophagus and the ventriculus of the bird. Histopathological examination of the tissue samples of oesophagus, proventriculus and ventriculus was performed on paraffin sections using a set of staining procedures. The sporadic lesions were seen in the tela submucosa of oesophagus containing connective tissue mast cells, eosinophils and heterophils and some foci were surrounded by the fibrous tissue. In addition, a few inflammatory nodules had larval-like material inside, probably being of the same species. There were no visible morphological alterations in the epithelial layer of lamina propria mucosae of proventriculus, rich in goblet cells as well as in the tela submucosa. Majority of trematodes were localized in the ventriculus, where the lamina propria mucosae was damaged or disrupted sporadically. In these sites, in the tela submucosa, a various food-originated inorganic/organic material and eggs of C. hians were deposited, stimulating a weak inflammatory response. Nodules containing larvae were not observed in any of ventriculus tissue layers. This study demonstrated, for the first time, infection with adults of C. hians trematode in the Black stork nesting in Slovakia. The presence of larvae and eggs in the tissues of the upper gastrointestinal tract of bird was associated with mild inflammatory response but feeding behaviour of adult worms in the ventriculus probably contributed to the enhanced susceptibility of the lamina propria mucosae to mechanical damage by inorganic material. Although larval stages have not yet been documented in the intermediate hosts in Slovakia, our report indicates that the life cycle of C. hians might occur in Central

  3. Great cormorants (Phalacrocorax carbo) can detect auditory cues while diving

    DEFF Research Database (Denmark)

    Hansen, Kirstin Anderson; Maxwell, Alyssa; Siebert, Ursula

    2017-01-01

    In-air hearing in birds has been thoroughly investigated. Sound provides birds with auditory information for species and individual recognition from their complex vocalizations, as well as cues while foraging and for avoiding predators. Some 10% of existing species of birds obtain their food under...... the water surface. Whether some of these birds make use of acoustic cues while underwater is unknown. An interesting species in this respect is the great cormorant (Phalacrocorax carbo), being one of the most effective marine predators and relying on the aquatic environment for food year round. Here, its...... underwater hearing abilities were investigated using psychophysics, where the bird learned to detect the presence or absence of a tone while submerged. The greatest sensitivity was found at 2 kHz, with an underwater hearing threshold of 71 dB re 1 μPa rms. The great cormorant is better at hearing underwater...

  4. The relationship between sea surface temperature and population change of Great Cormorants Phalacrocorax carbo breeding near Disko Bay, Greenland

    DEFF Research Database (Denmark)

    White, C.R.; Boertmann, David; Gremillet, D.

    2011-01-01

    waters. We show that rates of population change of Cormorant colonies around Disko Bay, Greenland, are positively correlated with sea surface temperature, suggesting that they may benefit from a warming Arctic. However, although Cormorant populations may increase in response to Arctic warming, the extent...... of expansion of their winter range may ultimately be limited by other factors, such as sensory constraints on foraging behaviour during long Arctic nights....

  5. Population Development of Baltic Bird Species: Great Cormorant (Phalacrocorax carbo sinensis) - Update with results from 2011

    DEFF Research Database (Denmark)

    Herrmann, Christof; Bregnballe, Thomas; Larsson, Kjell

    2011-01-01

    pair numbers started to increase during the second half of the 1970s. During the 1980s, the Cormorant started to expand its range towards the northern and eastern parts of the Baltic. Currently, the species is present in the whole Baltic Sea area, including the northern parts of the Gulf of Bothnia....... After a decade of exponential growth, the breeding population of the Cormorant has stabilized in the south-western Baltic (Denmark and the northern Federal States of Germany - Schleswig-Holstein and Mecklenburg-Western Pomerania) in the 1990s, but breeding populations are still growing in the central...

  6. Sex differences in the accumulation of chlorinated dioxins in the cormorant (Phalacrocorax carbo): Implication of hepatic sequestration in the maternal transfer

    International Nuclear Information System (INIS)

    Kubota, Akira; Yoneda, Kumiko; Tanabe, Shinsuke; Iwata, Hisato

    2013-01-01

    This study focuses on gender-specific accumulation features of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/DFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in common (great) cormorants (Phalacrocorax carbo) collected from Lake Biwa, Japan. Male cormorants showed a tendency to have higher levels of PCDD/DFs and DL-PCBs than did females. For PCDDs, the male-to-female concentration ratio (M/F ratio) for each congener significantly decreased with the liver-to-muscle concentration ratio (Li/Mu ratio). For PCDFs, there also was a weak negative relationship between Li/Mu ratio and M/F ratio. In contrast, for DL-PCBs, M/F ratios showed no correlation with Li/Mu ratios, but increased with an increase in lipophilicity. These results, together with observations from prior studies, suggest that congener-specific hepatic sequestration may be a factor limiting the maternal transfer of PCDDs and, to a lesser extent, PCDFs. Maternal transfer of DL-PCBs seems to favor more lipophilic congeners in the cormorants. -- Highlights: •Sex-dependent accumulation of chlorinated dioxins in cormorants was revealed. •Sex-difference in PCDD levels is controlled by congener-selective hepatic sequestration. •Sex-difference in DL-PCB levels is accounted for by congener-specific hydrophobicity. •QSARs on the maternal transfer are different among PCDDs, PCDFs and DL-PCBs. -- Sex-difference in accumulation of PCDD/DFs and DL-PCBs was observed in cormorants, most likely due to the congener-specific maternal transfer

  7. Recent population size, trends, and limiting factors for the double-crested Cormorant in Western North America

    Science.gov (United States)

    Adkins, Jessica Y.; Roby, Daniel D.; Lyons, Donald E.; Courtot, Karen N.; Collis, Ken; Carter, Harry R.; Shuford, W. David; Capitolo, Phillip J.

    2014-01-01

    The status of the double-crested cormorant (Phalacrocorax auritus) in western North America was last evaluated during 1987–2003. In the interim, concern has grown over the potential impact of predation by double-crested cormorants on juvenile salmonids (Oncorhynchusspp.), particularly in the Columbia Basin and along the Pacific coast where some salmonids are listed for protection under the United States Endangered Species Act. Recent re-evaluations of double-crested cormorant management at the local, flyway, and federal level warrant further examination of the current population size and trends in western North America. We collected colony size data for the western population (British Columbia, Washington, Oregon, Idaho, California, Nevada, Utah, Arizona, and the portions of Montana, Wyoming, Colorado and New Mexico west of the Continental Divide) by conducting aircraft-, boat-, or ground-based surveys and by cooperating with government agencies, universities, and non-profit organizations. In 2009, we estimated approximately 31,200 breeding pairs in the western population. We estimated that cormorant numbers in the Pacific Region (British Columbia, Washington, Oregon, and California) increased 72% from 1987–1992 to circa 2009. Based on the best available data for this period, the average annual growth rate (λ) of the number of breeding birds in the Pacific Region was 1.03, versus 1.07 for the population east of the Continental Divide during recent decades. Most of the increase in the Pacific Region can be attributed to an increase in the size of the nesting colony on East Sand Island in the Columbia River estuary, which accounts for about 39% of all breeding pairs in the western population and is the largest known breeding colony for the species (12,087 breeding pairs estimated in 2009). In contrast, numbers of breeding pairs estimated in coastal British Columbia and Washington have declined by approximately 66% during this same period. Disturbance at breeding

  8. Dietary intake of Deepwater Horizon oil-injected live food fish by double-crested cormorants resulted in oxidative stress.

    Science.gov (United States)

    Pritsos, Karen L; Perez, Cristina R; Muthumalage, Thivanka; Dean, Karen M; Cacela, Dave; Hanson-Dorr, Katie; Cunningham, Fred; Bursian, Steven J; Link, Jane E; Shriner, Susan; Horak, Katherine; Pritsos, Chris A

    2017-12-01

    The Deepwater Horizon oil spill released 134 million gallons of crude oil into the Gulf of Mexico making it the largest oil spill in US history and exposing fish, birds, and marine mammals throughout the Gulf of Mexico to its toxicity. Fish eating waterbirds such as the double-crested cormorant (Phalacrocorax auritus) were exposed to the oil both by direct contact with the oil and orally through preening and the ingestion of contaminated fish. This study investigated the effects of orally ingestedMC252 oil-contaminated live fish food by double-crested cormorants on oxidative stress. Total, reduced, and oxidized glutathione levels, superoxide dismutase and glutathione peroxidase activities, total antioxidant capacity and lipid peroxidation were assessed in the liver tissues of control and treated cormorants. The results suggest that ingestion of the oil-contaminated fish resulted in significant increase in oxidative stress in the liver tissues of these birds. The oil-induced increase in oxidative stress could have detrimental impacts on the bird's life-history. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. De stand van de ooievaar, Ciconia c. ciconia (Linné), in Nederland in 1950 (The status of the White Stork in the Netherlands in the year 1950)

    NARCIS (Netherlands)

    Mörzer Bruijns, M.F.; Braaksma, S.

    1955-01-01

    For many years in succession countings of the breeding number of white storks (Ciconia ciconia) ir the Netherlands have been performed by F. HAVERSCHMIDT. lis observations procure data up till the year 1946. As the decreasç or the white stork as a breeding species appeared to be rather alarmiug

  10. Canadian supercritical water reactor modeling using G4STORK

    International Nuclear Information System (INIS)

    Ford, W.; Buijs, A.

    2015-01-01

    The Canadian Supercritical Water Reactor design was simulated using G4STORK. The results showed the expected trends but the determined Keff of 1.253±0.001 with a Coolant Void Reactivity (CVR) of -25mk differed greatly from the results achieved using MCNP of Keff=1.2914 and a CVR of -14mk. This discrepancy is partly due to the different data libraries used and the mixing of different temperature libraries in MCNP, but is also likely due to a difference in the physics methodology. Work is ongoing to further clarify reasons for discrepancies and improve the efficiency of the simulation. (author)

  11. Canadian supercritical water reactor modeling using G4STORK

    Energy Technology Data Exchange (ETDEWEB)

    Ford, W.; Buijs, A. [McMaster University, Hamilton, ON (Canada)

    2015-07-01

    The Canadian Supercritical Water Reactor design was simulated using G4STORK. The results showed the expected trends but the determined Keff of 1.253±0.001 with a Coolant Void Reactivity (CVR) of -25mk differed greatly from the results achieved using MCNP of Keff=1.2914 and a CVR of -14mk. This discrepancy is partly due to the different data libraries used and the mixing of different temperature libraries in MCNP, but is also likely due to a difference in the physics methodology. Work is ongoing to further clarify reasons for discrepancies and improve the efficiency of the simulation. (author)

  12. 50 CFR 21.48 - Depredation order for double-crested cormorants to protect public resources.

    Science.gov (United States)

    2010-10-01

    ..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD PERMITS Control of..., wildlife, plants, and their habitats) caused by double-crested cormorants. (b) In what areas can this..., Minnesota, Mississippi, Missouri, New York, North Carolina, Ohio, Oklahoma, South Carolina, Tennessee, Texas...

  13. Exposure of the endangered Milky stork population to cadmium and lead via food and water intake in Kuala Gula Bird Sanctuary, Perak, Malaysia

    OpenAIRE

    Rahman, Faid; Ismail, Ahmad; Omar, Hishamuddin; Hussin, Mohamed Zakaria

    2017-01-01

    The Milky stork is listed as an endangered species endemic to the Southeast Asia region. In Malaysia, the population is currently being reintroduced back into the wild. However, the increase of anthropogenic activity throughout the coastal area might expose the population to hazardous chemicals such as heavy metals. This study highlights the contamination of cadmium (Cd) and lead (Pb) in the Milky storkâs diet. Additionally, this is the first time an integrated exposure model being used to as...

  14. Molecular epidemiology and virulence assessment of Aspergillus fumigatus isolates from white stork chicks and their environment.

    Science.gov (United States)

    Olias, Philipp; Gruber, Achim D; Hafez, Hafez M; Lierz, Michael; Slesiona, Silvia; Brock, Matthias; Jacobsen, Ilse D

    2011-03-24

    Aspergillus fumigatus is a common pathogen in poultry and captive wild birds and an emerging opportunistic fungal pathogen in immunocompromised humans. Although invasive aspergillosis is frequently reported in free-ranging wild birds, the incidence and epidemiology of the disease in a natural setting is unknown. We recently reported endemic outbreaks of invasive aspergillosis at white stork nesting sites close to human habitation in Germany with significant subsequent breeding losses. Therefore, we hypothesized that A. fumigatus strains with higher virulence in birds may have evolved in this environment and performed the first epidemiological analysis of invasive aspergillosis in free-ranging wild birds. Sixty-one clinical and environmental A. fumigatus isolates from six affected nesting sites were genotyped by microsatellite analysis using the STRAf-assay. The isolates showed a remarkable high genomic diversity and, contrary to the initial hypothesis, clinical and environmental isolates did not cluster significantly. Interestingly, storks were infected with two to four different genotypes and in most cases both mating types MAT-1.1 and MAT-1.2 were present within the same specimen. The majority of selected clinical and environmental strains exhibited similar virulence in an in vivo infection model using embryonated chicken eggs. Noteworthy, virulence was not associated with one distinct fungal mating type. These results further support the assumption that the majority of A. fumigatus strains have the potential to cause disease in susceptible hosts. In white storks, immaturity of the immune system during the first three weeks of age may enhance susceptibility to invasive aspergillosis. Copyright © 2010 Elsevier B.V. All rights reserved.

  15. Concentrations of Metals, Metalloids, and Chlorinated Pollutants in Blood and Plasma of White Stork (Ciconia ciconia) Nestlings From Spain.

    Science.gov (United States)

    Pérez-López, M; De la Casa-Resino, I; Hernández-Moreno, D; Galeano, J; Míguez-Santiyán, M P; de Castro-Lorenzo, A; Otero-Filgueiras, M; Rivas-López, O; Soler, F

    2016-10-01

    The aim of this study was to determine the levels of different inorganic elements (lead [Pb], mercury [Hg], and arsenic [As]) and persistent chlorinated pollutants (including polychlorinated biphenyls [PCBs] and organochlorine pesticides [OCPs]) in blood and plasma of White stork (Ciconia ciconia) nestlings from northwest (NW) Spain. The concentrations of PCBs were lower than the limit of detection in all samples. The OCPs γ-HCH, 4,4'-DDE, HCB, and endosulfan were detected most frequently in plasma from White stork nestlings. These OCPs were detected in 98, 54, 39, and 37 % of all samples, respectively. However, the concentrations of organic pollutants were lower than the risk thresholds for birds. The mean levels of the inorganic elements Pb, Hg, and As were found to be 36.92 ± 33.48, 16.48 ± 12.87, and 9.813 ± 13.84 µg/L, respectively. These levels were also lower than the risk thresholds for birds. This study not only provides a snapshot of the levels of both inorganic and organic contaminants in wild White storks in NW Spain, it also provides a useful baseline for biomonitoring levels of the measured contaminants in this area.

  16. Short Note: New breeding locality for Crowned Cormorant

    Directory of Open Access Journals (Sweden)

    P.A. Whittington

    2004-12-01

    Full Text Available The Crowned Cormorant Phalacrocorax coronatus is endemic to the southern African subregion with an estimated population of about 2700 pairs, breeding at 48 localities between Walvis Bay, Namibia and Cape Agulhas, South Africa (Crawford et al. 1994, Crawford 1997. The easternmost point at which breeding has previously been recorded is 2 km west of Aasfontein (34°46'S, 19°50'E, where 35 nests were recorded in January 1981 (Crawford et al. 1982. Non-breeding birds have been seen further to the east as far as Holkom Meester se Baai (34°23'S, 21°49'E (Crawford et al. 1982.

  17. Reproductive performance in three neighbouring Great Cormorant (Phalacrocorax carbo) colonies in sw Kattegat, Denmark

    DEFF Research Database (Denmark)

    Bregnballe, Thomas; Gregersen, Jens; Hénaux, Viviane

    of Great Cormorants Phalacrocorax carbo sinensis in the old Danish Vorsø colony as it quadrupled in number of breeding pairs and later declined markedly. Some of these parameters were also studied in two neighbouring colonies. We found marked declines in breeding success in the old colony while breeding...

  18. Isolation of herpesvirus and Newcastle disease virus from White Storks (Ciconia ciconia) maintained at four rehabilitation centres in northern Germany during 1983 to 2001 and failure to detect antibodies against avian influenza A viruses of subtypes H5 and H7 in these birds.

    Science.gov (United States)

    Kaleta, Erhard F; Kummerfeld, Norbert

    2012-01-01

    Herpesvirus isolations from peripheral white blood cells of 253 White Storks (Ciconia ciconia) were obtained during a long-term study (1983 to 2001). The storks lived for a few months to 20 years at four rehabilitation centres. Isolates were obtained from 83 of 253 storks. This herpesvirus is indigenous for storks and unrelated to any other avian herpesvirus. Significantly more herpesvirus isolates were obtained during spring than in autumn samplings. The intervals between the first and last virus isolation ranged from 1 to 15 years. Herpesvirus isolates were simultaneously obtained from white blood cells and from pharyngeal swabs of four of 34 storks but not from cloacal swabs. Neutralizing antibodies to stork herpesvirus were detected in 178 of 191 examined blood plasma samples. Neutralizing antibodies against stork herpesvirus did not correlate with herpesvirus viraemia. The results further substantiate the persistence of herpesvirus in White Storks and underline the previously unrecorded long periods of virus and antibody presence. Virulent avian paramyxovirus type 1 (APMV-1; Newcastle disease virus) was isolated from white blood cells during 1992 and 1993 from four healthy migrating storks, and possessed virulence markers on the cleavage site of the H and F genes. These properties resemble the NE type of APMV-1. Haemagglutination inhibition antibodies against APMV-1 were detected in 16 of 191 blood plasma samples. Avian influenza A virus was not isolated and antibodies against subtypes H5 and H7 were not detected.

  19. Breeding near a landfill may influence blood metals (Cd, Pb, Hg, Fe, Zn) and metalloids (Se, As) in white stork (Ciconia ciconia) nestlings.

    Science.gov (United States)

    de la Casa-Resino, Irene; Hernández-Moreno, David; Castellano, Antonio; Pérez-López, Marcos; Soler, Francisco

    2014-10-01

    Cadmium, lead, mercury, selenium, iron, zinc and arsenic levels were measured in blood samples from 59 free-ranging white stork nestlings from colonies located in three different environmental conditions in Western Spain. The reference colony was situated in "Llanos de Cáceres y Sierra de Fuentes", an Area of Special Interest for Bird Protection. A second colony was located close to (4.9 km) an urban landfill and a third one was close to both an intensive agricultural area and an urban landfill (1.5 km). Blood samples were diluted and elemental analysis was performed using inductively coupled plasma mass spectrometer. In all cases, the essential metals zinc and iron were found at the highest mean concentrations followed by lead > selenium > mercury > arsenic > cadmium. Regarding toxic metals, the highest concentrations were found for lead (ranging from 23.27 to 146.4 µg/L) although in all cases the concentrations were lower than those considered to cause subclinical effects. The metals levels detected in the chick's blood were not related to the previously reported levels in the soil next to the colonies, which may indicate that landfills are the main source of metals in white stork nestlings. The present data showed that metal levels in white stork chicks may be influenced by the use of landfills as feeding areas by the parents. However, more studies on the metal content in the feed of white stork and the influence of the distance to the landfill are necessary to establish the causality of these findings.

  20. Home Range Size and Resource Use of Breeding and Non-breeding White Storks Along a Land Use Gradient

    Directory of Open Access Journals (Sweden)

    Damaris Zurell

    2018-06-01

    Full Text Available Biotelemetry is increasingly used to study animal movement at high spatial and temporal resolution and guide conservation and resource management. Yet, limited sample sizes and variation in space and habitat use across regions and life stages may compromise robustness of behavioral analyses and subsequent conservation plans. Here, we assessed variation in (i home range sizes, (ii home range selection, and (iii fine-scale resource selection of white storks across breeding status and regions and test model transferability. Three study areas were chosen within the Central German breeding grounds ranging from agricultural to fluvial and marshland. We monitored GPS-locations of 62 adult white storks equipped with solar-charged GPS/3D-acceleration (ACC transmitters in 2013–2014. Home range sizes were estimated using minimum convex polygons. Generalized linear mixed models were used to assess home range selection and fine-scale resource selection by relating the home ranges and foraging sites to Corine habitat variables and normalized difference vegetation index in a presence/pseudo-absence design. We found strong variation in home range sizes across breeding stages with significantly larger home ranges in non-breeding compared to breeding white storks, but no variation between regions. Home range selection models had high explanatory power and well predicted overall density of Central German white stork breeding pairs. Also, they showed good transferability across regions and breeding status although variable importance varied considerably. Fine-scale resource selection models showed low explanatory power. Resource preferences differed both across breeding status and across regions, and model transferability was poor. Our results indicate that habitat selection of wild animals may vary considerably within and between populations, and is highly scale dependent. Thereby, home range scale analyses show higher robustness whereas fine-scale resource

  1. Development of great cormorant population (Phalacrocorax carbo sinensis in North-East France – synthesis of long term monitoring (1997–2008

    Directory of Open Access Journals (Sweden)

    Collas M.

    2011-12-01

    Full Text Available Since 1997, the North-east inter-regional delegation of the French National Institute for Water and Aquatic Ecosystems (ONEMA has been running annual networked monitoring of the great cormorant (Phalacrocorax carbo sinensis population in three French administrative regions: Alsace, Lorraine and Champagne-Ardenne. Changes in the wintering population are assessed by means of four monthly counts. Over the period 1997/2001, the population increased at a steady rate (average annual increase of 16%. Taking the population in January as the reference, the year 2001 shows a peak population of 13 000 birds. Since 2002, gradual decreasing in numbers has taken place (average rate of –4.5%. In January 2008, less than 10 000 birds were recorded. At the same time, nesting of the great cormorant was observed for the first time in Lorraine region in 1986. Then, the bird has been nesting in Champagne-Ardenne region and, since 2003, in all three regions. In 2008, ten nesting colonies were identified, composed of 512 couples (annual increase in population of 30.2% and 1500 births were recorded in Spring. Parallel to nesting, 4605 great cormorants were killed during the winter of 2007/2008 for a population of 10 000 birds. Climatic conditions may cause significant changes in wintering movements of the species, while operations to regulate cormorant numbers do not seem to have significant impact on the level of frequentation in winter. Finally, the using conditions of certain artificial lakes seem to be favourable for the bird during particularly difficult periods.

  2. In-air and underwater hearing in the great cormorant (Phalacrocorax carbo sinensis)

    DEFF Research Database (Denmark)

    Johansen, Sasia; Larsen, Ole Næsbye; Christensen-Dalsgaard, Jakob

    2016-01-01

    Hearing thresholds of a great cormorant (Phalacrocorax carbo) were measured in air and under water using psychophysics. The lowest thresholds were at 2 kHz (45 dB re 20 μPa root-mean-square [rms] in air and 79 dB re 1 μPa rms in water). Auditory brainstem response measurements on one anesthetized...

  3. Breeding Double-crested Cormorants and Wading Birds on Isla Alcatraz, Sonora, México

    Science.gov (United States)

    Jennifer N. Duberstein; Virginia Jimenez-Serrania; Tad A. Pfister; Kirsten E. Lindquist; Lorayne Meltzer

    2005-01-01

    Isla Alcatraz is a small volcanic island in the Eastern Midriff Island region of the Gulf of California, approximately 1.4 km from the fishing community of Bahía de Kino, Sonora, México. The island falls under the protection of the Gulf Island Reserve system for wildlife and migratory birds. Isla Alcatraz is home to one of the largest Double-crested Cormorant (

  4. On Storks and Babies: Correlation, Causality and Field Experiments

    Directory of Open Access Journals (Sweden)

    Lambrecht Anja

    2016-11-01

    Full Text Available The explosion of available data has created much excitement among marketing practitioners about their ability to better understand the impact of marketing investments. Big data allows for detecting patterns and often it seems plausible to interpret them as causal. While it is quite obvious that storks do not bring babies, marketing relationships are usually less clear. Apparent “causalities” often fail to hold up under examination. If marketers want to be sure not to walk into a causality trap, they need to conduct field experiments to detect true causal relationships. In the present digital environment, experiments are easier than ever to execute. However, they need to be prepared and interpreted with great care in order to deliver meaningful and genuinely causal results that help improve marketing decisions.

  5. The use of coded wire tags to estimate cormorant predation on fish stocks in an estuary

    DEFF Research Database (Denmark)

    Jepsen, Niels; Klenke, Reinhard; Sonnesen, Per Michael

    2010-01-01

    One of the main obstacles to resolving the conflict between an increasing population of cormorants, Phalacrocorax carbo sinensis, and the fishing industry is the lack of documentation of the effect of the birds’ predation on fish stocks. Tagging and releasing fish with coded wire tags followed...

  6. Purification, crystallization, preliminary X-ray diffraction and molecular-replacement studies of great cormorant (Phalacrocorax carbo) haemoglobin

    International Nuclear Information System (INIS)

    Jagadeesan, G.; Malathy, P.; Gunasekaran, K.; Harikrishna Etti, S.; Aravindhan, S.

    2014-01-01

    The great cormorant hemoglobin has been isolated, purified and crystallized and the three dimensional structure is solved using molecular replacement technique. Haemoglobin is the iron-containing oxygen-transport metalloprotein that is present in the red blood cells of all vertebrates. In recent decades, there has been substantial interest in attempting to understand the structural basis and functional diversity of avian haemoglobins. Towards this end, purification, crystallization, preliminary X-ray diffraction and molecular-replacement studies have been carried out on cormorant (Phalacrocorax carbo) haemoglobin. Crystals were grown by the hanging-drop vapour-diffusion method using PEG 3350, NaCl and glycerol as precipitants. The crystals belonged to the trigonal system P3 1 21, with unit-cell parameters a = b = 55.64, c = 153.38 Å, β = 120.00°; a complete data set was collected to a resolution of 3.5 Å. Matthews coefficient analysis indicated that the crystals contained a half-tetramer in the asymmetric unit

  7. Purification, crystallization, preliminary X-ray diffraction and molecular-replacement studies of great cormorant (Phalacrocorax carbo) haemoglobin

    Energy Technology Data Exchange (ETDEWEB)

    Jagadeesan, G. [Presidency College, Chennai 600 005 (India); Malathy, P.; Gunasekaran, K. [University of Madras, Chennai 600 025 (India); Harikrishna Etti, S. [GKM College of Engineering and Technology, Kamaraj Salai, Chennai 600 063 (India); Aravindhan, S., E-mail: aravindhanpresidency@gmail.com [Presidency College, Chennai 600 005 (India)

    2014-10-25

    The great cormorant hemoglobin has been isolated, purified and crystallized and the three dimensional structure is solved using molecular replacement technique. Haemoglobin is the iron-containing oxygen-transport metalloprotein that is present in the red blood cells of all vertebrates. In recent decades, there has been substantial interest in attempting to understand the structural basis and functional diversity of avian haemoglobins. Towards this end, purification, crystallization, preliminary X-ray diffraction and molecular-replacement studies have been carried out on cormorant (Phalacrocorax carbo) haemoglobin. Crystals were grown by the hanging-drop vapour-diffusion method using PEG 3350, NaCl and glycerol as precipitants. The crystals belonged to the trigonal system P3{sub 1}21, with unit-cell parameters a = b = 55.64, c = 153.38 Å, β = 120.00°; a complete data set was collected to a resolution of 3.5 Å. Matthews coefficient analysis indicated that the crystals contained a half-tetramer in the asymmetric unit.

  8. Mercury in parasitic nematodes and trematodes and their double-crested cormorant hosts: Bioaccumulation in the face of sequestration by nematodes

    International Nuclear Information System (INIS)

    Robinson, Stacey A.; Forbes, Mark R.; Hebert, Craig E.

    2010-01-01

    Endoparasites can alter their host's heavy metal concentrations by sequestering metals in their own tissues. Contracaecum spp. (a nematode), but not Drepanocephalus spathans (a trematode), were bioaccumulating mercury to concentrations 1.5 times above cormorant hosts. Nematodes did not have significantly greater stable nitrogen isotope values (δ 15 N) than their hosts, which is contradictory to prey-predator trophic enrichment studies, but is in agreement with other endoparasite-host relationships. However, Contracaecum spp. δ 13 C values were significantly greater than their hosts, which suggest that nematodes were consuming host tissues. Nematodes were accumulating and thus sequestering some of their cormorant hosts' body burden of methyl mercury; however, they were not dramatically reducing their hosts' accumulation of methyl mercury.

  9. TIME AND ENERGY CONSTRAINTS OF FISHING BEHAVIOR IN BREEDING CORMORANTS PHALACROCORAX-CARBO-SINENSIS AT LAKE IJSSELMEER, THE NETHERLANDS

    NARCIS (Netherlands)

    PLATTEEUW, M; VANEERDEN, MR

    1995-01-01

    TWO Cormorant colonies in The Netherlands (Naardermeer and Oostvaardersplassen), exploiting the same water bodies but situated at different distances from them, were compared with respect to daily variations in exact fishing sites and corresponding variations in time budget and fish consumption.

  10. Mercury in parasitic nematodes and trematodes and their double-crested cormorant hosts: Bioaccumulation in the face of sequestration by nematodes

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Stacey A., E-mail: srobinsc@connect.carleton.ca [Department of Biology, Carleton University, 209 Nesbitt Bldg, 1125 Colonel By Drive, Ottawa, Ontario, K1S 5B6 (Canada); Forbes, Mark R., E-mail: mforbes6@gmail.com [Department of Biology, Carleton University, 209 Nesbitt Bldg, 1125 Colonel By Drive, Ottawa, Ontario, K1S 5B6 (Canada); Hebert, Craig E., E-mail: Craig.Hebert@ec.gc.ca [Environment Canada, National Wildlife Research Centre, Carleton University, 1125 Colonel By Drive, Ottawa, Ontario, K1A 0H3 (Canada)

    2010-10-15

    Endoparasites can alter their host's heavy metal concentrations by sequestering metals in their own tissues. Contracaecum spp. (a nematode), but not Drepanocephalus spathans (a trematode), were bioaccumulating mercury to concentrations 1.5 times above cormorant hosts. Nematodes did not have significantly greater stable nitrogen isotope values ({delta}{sup 15}N) than their hosts, which is contradictory to prey-predator trophic enrichment studies, but is in agreement with other endoparasite-host relationships. However, Contracaecum spp. {delta}{sup 13}C values were significantly greater than their hosts, which suggest that nematodes were consuming host tissues. Nematodes were accumulating and thus sequestering some of their cormorant hosts' body burden of methyl mercury; however, they were not dramatically reducing their hosts' accumulation of methyl mercury.

  11. Organochlorines and mercury in livers of great cormorants (Phalacrocorax carbo sinensis) wintering in northeastern Mediterranean wetlands in relation to area, bird age, and gender

    International Nuclear Information System (INIS)

    Goutner, V.; Becker, P.H.; Liordos, V.

    2011-01-01

    Wild birds are exposed to pollutants in their habitats. Top consumers of aquatic environments such as the fish-eating great cormorant (Phalacrocorax carbo sinensis) are especially affected due to the bioaccumulation of toxic substances in their tissues. This study analysed the livers of 80 great cormorants from Greece to estimate the concentration of organochlorines and mercury and to examine their possible toxic effects and origin. The results showed that mercury (geometric mean 8089 ng g -1 dw), p,p'-DDE (2628 ng g -1 dw), Σ HCHs (47 ng g -1 dw) and HCB (116 ng g -1 dw) concentrations can be considered high compared with those found in great cormorant livers elsewhere except in highly polluted areas, whereas Σ PCBs occurred in relatively low concentrations (1091 ng g -1 dw). β-HCH was the dominant HCH isomer. Pollutant levels were generally unrelated to area, age and gender. However, p,p'-DDE and p,p'-DDD showed intersite differences, whilst the proportion of PCBs with 8 chlorine atoms were significantly higher in adult than 1st year great cormorants. Pollution did not reflect local patterns but rather these along the Baltic and Black Seas, whilst differences in p,p'-DDE concentration and Σ DDTs/ΣPCBs ratios between Evros, Axios or Amvrakikos, found on common migration route, suggested different bird origins. Most birds had toxic mercury concentrations; 83.7% above 4000 ng g -1 dw and 16% above 17,000 ng g -1 dw. Other pollutant levels were too low to have adverse effects. - Research Highlights: → Mercury, p,p'-DDE, β-HCH and HCB occurred in highest concentrations. → More than 80% of Greek great cormorants might have suffered from mercurial intoxication. → Pollutant levels were generally unrelated to gender, age and area (except DDTs). → Baltic and Black Seas are possible regions of origin and accumulation of Hg and DDTs.

  12. Organochlorines and mercury in livers of great cormorants (Phalacrocorax carbo sinensis) wintering in northeastern Mediterranean wetlands in relation to area, bird age, and gender

    Energy Technology Data Exchange (ETDEWEB)

    Goutner, V., E-mail: vgoutner@bio.auth.gr [Department of Zoology, School of Biology, Aristotle University of Thessaloniki, GR-54124 Thessaloniki (Greece); Becker, P.H., E-mail: peter.becker@ifv-vogelwarte.de [Institute of Avian Research ' Vogelwarte Helgoland' , An der Vogelwarte 21, D-26386 Wilhelmshaven (Germany); Liordos, V., E-mail: liordos@yahoo.com [Department of Zoology, School of Biology, Aristotle University of Thessaloniki, GR-54124 Thessaloniki (Greece)

    2011-01-15

    Wild birds are exposed to pollutants in their habitats. Top consumers of aquatic environments such as the fish-eating great cormorant (Phalacrocorax carbo sinensis) are especially affected due to the bioaccumulation of toxic substances in their tissues. This study analysed the livers of 80 great cormorants from Greece to estimate the concentration of organochlorines and mercury and to examine their possible toxic effects and origin. The results showed that mercury (geometric mean 8089 ng g{sup -1} dw), p,p'-DDE (2628 ng g{sup -1} dw), {Sigma} HCHs (47 ng g{sup -1} dw) and HCB (116 ng g{sup -1} dw) concentrations can be considered high compared with those found in great cormorant livers elsewhere except in highly polluted areas, whereas {Sigma} PCBs occurred in relatively low concentrations (1091 ng g{sup -1} dw). {beta}-HCH was the dominant HCH isomer. Pollutant levels were generally unrelated to area, age and gender. However, p,p'-DDE and p,p'-DDD showed intersite differences, whilst the proportion of PCBs with 8 chlorine atoms were significantly higher in adult than 1st year great cormorants. Pollution did not reflect local patterns but rather these along the Baltic and Black Seas, whilst differences in p,p'-DDE concentration and {Sigma} DDTs/{Sigma}PCBs ratios between Evros, Axios or Amvrakikos, found on common migration route, suggested different bird origins. Most birds had toxic mercury concentrations; 83.7% above 4000 ng g{sup -1} dw and 16% above 17,000 ng g{sup -1} dw. Other pollutant levels were too low to have adverse effects. - Research Highlights: {yields} Mercury, p,p'-DDE, {beta}-HCH and HCB occurred in highest concentrations. {yields} More than 80% of Greek great cormorants might have suffered from mercurial intoxication. {yields} Pollutant levels were generally unrelated to gender, age and area (except DDTs). {yields} Baltic and Black Seas are possible regions of origin and accumulation of Hg and DDTs.

  13. Concentration of 12 Metals and Metalloids in the Blood of White Stork (Ciconia ciconia): Basal Values and Influence of Age and Gender.

    Science.gov (United States)

    Maia, Ana Raquel; Soler-Rodriguez, Francisco; Pérez-López, Marcos

    2017-11-01

    The white stork (Ciconia ciconia) is being increasingly used in biomonitoring programmes of environmental contaminants due to its growing population in Europe; however, studies on inorganic elements are scarce. The blood of 70 white storks was collected and analysed by inductively coupled plasma mass spectroscopy (ICP-MS) to determine the presence of the following elements: lead (Pb), mercury (Hg), arsenic (As), nickel (Ni), iron (Fe), zinc (Zn), copper (Cu), selenium (Se), manganese (Mn), chromium (Cr), cobalt (Co), and cadmium (Cd). Our main goals were to determine the mean concentrations of these elements in the blood and to study its association with age and gender. Mean concentrations were highest for Fe, followed by Zn, and lowest for Co and Cd. The metal levels were similar to the values referred in the literature for the same species from different locations. No statistically significant differences were found between males and females. Regarding age, statistically significant differences were observed for Ni, Cu, Se, Hg, and Pb between young and adult animals (except for Pb, values in adults were higher than in fledglings). Many element concentrations were correlated, with the strongest correlations between the pairs Hg-Se, Hg-As, and Fe-Zn, mainly in adults. This study provides the baseline data for a monitoring program based on white stork blood as a nondestructive sample.

  14. Developmental exposure to a toxic spill compromises long-term reproductive performance in a wild, long-lived bird: the white stork (Ciconia ciconia.

    Directory of Open Access Journals (Sweden)

    Raquel Baos

    Full Text Available BACKGROUND/OBJECTIVE: Exposure to environmental contaminants may result in reduced reproductive success and long-lasting population declines in vertebrates. Emerging data from laboratory studies on model species suggest that certain life-stages, such as development, should be of special concern. However, detailed investigations of long-term consequences of developmental exposure to environmental chemicals on breeding performance are currently lacking in wild populations of long-lived vertebrates. Here, we studied how the developmental exposure to a mine spill (Aznalcóllar, SW Spain, April 1998 may affect fitness under natural conditions in a long-lived bird, the White Stork (Ciconia ciconia. METHODOLOGY: The reproductive performance of individually-banded storks that were or not developmentally exposed to the spill (i.e. hatched before or after the spill was compared when these individuals were simultaneously breeding during the seven years after the spill occurred (1999-2005. PRINCIPAL FINDINGS: Female storks developmentally exposed to the spill experienced a premature breeding senescence compared with their non-developmentally exposed counterparts, doing so after departing from an unusually higher productivity in their early reproductive life (non-developmentally exposed females: 0.5 ± 0.33SE fledglings/year at 3-yr old vs. 1.38 ± 0.31SE at 6-7 yr old; developmentally exposed females: 1.5 ± 0.30SE fledglings/year at 3-yr old vs. 0.86 ± 0.25SE at 6-7 yr old. CONCLUSIONS/SIGNIFICANCE: Following life-history theory, we propose that costly sub-lethal effects reported in stork nestlings after low-level exposure to the spill-derived contaminants might play an important role in shaping this pattern of reproduction, with a clear potential impact on population dynamics. Overall, our study provides evidence that environmental disasters can have long-term, multigenerational consequences on wildlife, particularly when affecting developing individuals

  15. Double-Crested Cormorant ( Phalacrocorax auritus) Nesting Effects on Understory Composition and Diversity on Island Ecosystems in Lake Erie

    Science.gov (United States)

    McGrath, Darby M.; Murphy, Stephen D.

    2012-08-01

    The context for this study is the management concerns over the severity and extent of the impact of cormorants on island flora in the recent past on Lake Erie islands. Accordingly, this study sought to quantify the nesting colonies' influence on coarse woody litter and how nest densities and litter depth may influence the herbaceous layer, the seed bank composition and viability across the extent of three Lake Erie islands. The data for this study were collected from 2004 to 2008 on East Sister Island and Middle Island using two main strategies. First, herbaceous layer surveys, cormorant nest counts, soil seed bank cores, and litter depth measurements were executed using a plotless-point quarter method to test island-wide impacts from nesting activities (data were also collected on a third island, West Sister Island as a reference for the other two islands). Secondly, a sub-sample of the entire plot set was examined in particularly high nesting density areas for two islands (Middle Island and East Sister Island). Kruskal-Wallis tests indicated that there are subtle changes in the herbaceous diversity (total, native and exotic) and seed bank composition across the islands. The sub sample set of the plots demonstrated that Phalacrocorax auritus nest density does influence litter depth, herbaceous species abundance and diversity. Cormorant nesting pressures are restricted to areas of high nesting pressures and competition. However, there remains a risk to the interior herbaceous layer of the island if the effects of nesting pressures at the edges advance inward from this perimeter.

  16. In-air and underwater hearing of the cormorant

    DEFF Research Database (Denmark)

    Larsen, Ole Næsbye; Wahlberg, Magnus; Christensen-Dalsgaard, Jakob

    Numerous studies have mapped the hearing abilities of birds in air but currently there is little or no data on how diving birds hear or react to sound under water. Therefore, it is unknown whether the ears and auditory system of diving birds are adapted to underwater hearing. In the present study...... 10 cm under water in a large water filled-tank while being artificially ventilated. ABR-responses to calibrated tone bursts produced by a woofer and an underwater speaker, respectively, were measured at different intensities and frequencies to obtain hearing threshold values in air and under water......Hz) under water. Generally, the cormorant ear was not very sensitive to sound, neither in air nor under water. The hearing abilities in water, however, were better than what would have been expected for a purely in-air adapted ear. (Supported by the Carlsberg Foundation 2009_01_0292 and the Danish Council...

  17. The influence of geographical location, host maturity and sex on intestinal helminth communities of the double-crested cormorant Phalacrocorax auritus from the eastern United States.

    Science.gov (United States)

    Sheehan, K L; Hanson-Dorr, K C; Dorr, B S; Yarrow, G K; Johnson, R J

    2017-09-01

    Here the intestinal helminth infracommunities of 218 double-crested cormorants (Phalacrocorax auritus) from 11 locations in Alabama, Minnesota, Mississippi and Vermont are documented. Trematode infections were present in 98% of hosts; 65% of cormorants carried cestode infections, 4% were infected with acanthocephalans and 66% had nematode intestinal parasites. Parasite infracommunities of hosts collected on wintering grounds had higher richness and diversity than did birds collected on breeding grounds. Differences in parasite richness and diversity between male and female P. auritus were also detected, but not between immature and mature bird hosts. Parasite intensity did not differ by sex, maturity, or between breeding and wintering season. The most common parasite was Drepanocephalus auritus (spathans), which is recognized as a disease agent that negatively impacts the catfish aquaculture industry in the US. Echinochasmus sp. in double-crested cormorants is documented for the first time in the United States. We suggest that the differences observed among parasite infracommunities could be associated with the foraging distances travelled by P. auritus during breeding and wintering seasons, which is limited by allocation of parental care during the breeding season.

  18. Indirect manifestation of cormorant (Phalacrocorax carbo sinensis (L. predation on pond fish stock

    Directory of Open Access Journals (Sweden)

    J. Kortan

    2008-10-01

    Full Text Available The damage to fisheries caused by cormorant predation pressure consists of losses due to direct predation and subsequent indirect losses elicited by cormorant feeding activities resulting in fish wounding and stress. Healed wounds reduce the commercial value of afflicted fish and stress may impact fish body and health condition. Fulton´s condition coefficient (FCC was calculated for wounded and healthy two-year old carp originating from five South Moravian (Czech Republic fishponds. Significant (P = 0.0011 differences in FCC (mean ± s.d., were found between non-wounded (1.48 ± 0.11, n = 19 and wounded mirror common carp, Cyprinus carpio (1.33 ± 0.14, n = 19. However no differences (P > 0.05 were recorded in scaly common carp between non-wounded (FCC 1.41 ± 0.25, n = 33 and wounded (FCC 1.46 ± 0.47, n = 33 fish of the same age and size category. A computer assisted image analysis was applied to describe the extent of such injuries. In the case of two-year old mirror, scaly and bighead carp (Aristichthys nobilis, signs of serious injuries (necroses were recorded on 1.93, 0.89 and 1.61% of body surface, respectively. Fish with deep wounds and scars, often accompanied with progressive necroses, were subject to parasitological examination. The percentage of wounded fish from total fish harvested was evaluated as ranging between < 1 and 47.4% in five ponds under study.

  19. Organochlorine contaminants and reproductive success of double-crested cormorants from Green Bay, Wisconsin, USA

    Science.gov (United States)

    Custer, T.W.; Custer, Christine M.; Hines, R.K.; Gutreuter, S.; Stromborg, K.L.; Allen, P. David; Melancon, M.J.

    1999-01-01

    In 1994 and 1995, nesting success of double-crested cormorants (Phalacrocorax auritus) was measured at Cat Island, in southern Green Bay, Lake Michigan, Wisconsin, USA. Sample eggs at pipping and unhatched eggs were collected and analyzed for organochlorines (including total polychlorinated biphenyls [PCBs] and DDE), hepatic microsomal ethoxyresorufin-O-dealkylase (EROD) activity in embryos, and eggshell thickness. Of 1,570 eggs laid, 32% did not hatch and 0.4% had deformed embryos. Of 632 chicks monitored from hatching to 12 d of age, 9% were missing or found dead; no deformities were observed. The PCB concentrations in sample eggs from clutches with deformed embryos (mean = 10.2 μg/g wet weight) and dead embryos (11.4 μg/g) were not significantly higher than concentrations in sample eggs from nests where all eggs hatched (12.1 μg/g). A logistic regression of hatching success versus DDE, dieldrin, and PCB concentrations in sibling eggs identified DDE and not dieldrin or PCBs as a significant risk factor. A logistic regression of hatching success versus DDE and eggshell thickness implicated DDE and not eggshell thickness as a significant risk factor. Even though the insecticide DDT was banned in the early 1970s, we suggest that DDE concentrations in double-crested cormorant eggs in Green Bay are still having an effect on reproduction in this species.

  20. 77 FR 60135 - St. Johns National Wildlife Refuge, FL; Final Comprehensive Conservation Plan and Finding of No...

    Science.gov (United States)

    2012-10-02

    ... possible to benefit refuge wildlife. Under Alternative C, we will expand management of wood storks and..., hiking, and bicycling. Bicycling that does not support appropriate and compatible uses, such as mountain...

  1. GROWTH OF CORMORANT PHALACROCORAX-CARBO-SINENSIS CHICKS IN RELATION TO BROOD SIZE, AGE RANKING AND PARENTAL FISHING EFFORT

    NARCIS (Netherlands)

    PLATTEEUW, M; KOFFIJBERG, K; DUBBELDAM, W

    1995-01-01

    Growth parameters of Cormorant hatchlings are described in relation to brood size and age ranking of each chick within individual broods. Growth rates, expressed as body mass increment per day over the period of linear, growth (5-30 days), ranged from 56.4-102.8 g . d(-1) and were found to be

  2. The Experience in Creating Protected Zones Around Nests of Birds of Prey and Black Stork in Ukraine

    Directory of Open Access Journals (Sweden)

    Stanislav G. Viter

    2018-03-01

    Full Text Available This article concludes a brief information about the project for the creation of protected zones around nests of the raptors and black storks in different national parks in the framework of a project supported by the Rufford Foundation in 2017. There are references to the legislative acts that made possible this work. Proposals on the size of protected zones around nests of different raptors species have been are given.

  3. Reproductive data and analysis of recoveries in a population of white stork Ciconia ciconia in southern Spain: a 24-year study

    Energy Technology Data Exchange (ETDEWEB)

    Cuadrado, M.; Sanchez, I.; Barcell, M.; Armario, M.

    2016-07-01

    Changes in nest density and reproductive success of a free–ranging population of white stork (Ciconia ciconia) in the Gardens of ZooBotánico Jerez (Cádiz) were studied from 1990 to 2013. Reproductive data (number of nests and number of chicks per nest) and the effect of rainfall on the reproductive success were analyzed. In addition, a number of chicks were colour–ringed each year and the recovery data were also analyzed. The number of nests found in the area steadily increased during the study period and varied greatly from year to year from 2001 onwards (mean 19, range = 4–35, N = 22 years). Reproductive success also varied greatly among years. Overall, the mean number of chicks per nest was 1.78 ± 1.2 (range = 0–5, N = 439 nests).Reproductive success was strongly influenced by rainfall. It was highest (1.88) in years classified as rainy, medium (1.62) in years classified as normal, and lowest (1.24) in dry years. A total of 404 white storks were ringed, 110 of which were observed a total of 308 times (2.8 + 2.8 times per bird, range 1–12, all year data pooled). Recovery data show that with one exception, all ringed birds were recorded at different habitats of S Spain throughout the year. Remarkably, none was observed at traditional wintering quarters, south of the Sahara in Africa. Juveniles remained in the area (from July to October) soon after leaving our colony, and virtually all of them disappeared from November to January (their first winter) but were recorded again during their first breeding season. On the contrary, adults were repeatedly recorded at different sites in Cádiz, Sevilla and Huelva all year round. These birds showed a strong philopatry as some of them were recorded as breeders in our colony, up to 11 years after ringing. Our data emphasize the importance of both refuse damp and wetland areas for the species, especially in winter, and a shift in the timing of the reproductive season as birds were recorded from November to July

  4. Exposure of the endangered Milky stork population to cadmium and lead via food and water intake in Kuala Gula Bird Sanctuary, Perak, Malaysia

    Directory of Open Access Journals (Sweden)

    Faid Rahman

    Full Text Available The Milky stork is listed as an endangered species endemic to the Southeast Asia region. In Malaysia, the population is currently being reintroduced back into the wild. However, the increase of anthropogenic activity throughout the coastal area might expose the population to hazardous chemicals such as heavy metals. This study highlights the contamination of cadmium (Cd and lead (Pb in the Milky stork’s diet. Additionally, this is the first time an integrated exposure model being used to assess heavy metal exposure risk to the population. Lead level (5.5–7.98 mg kg−1 in particular was relatively high compared to Cd (0.08–0.33 mg kg−1. This was probably related to the different niches occupied by the species in the aquatic environment. The results further show that the predicted exposure doses (through intake of both food and water for all metals are much lower than the Tolerable Daily Intake (TDI values. The total exposure dose for Cd was 0.11 mg kg−1 d−1 with TDI value of 0.54 mg kg−1 d−1 while Pb total exposure dose was 0.31 mg kg−1 d−1 with TDI value of 0.64 mg kg−1 d−1. Several possible factors that could lead to the observed pattern were discussed. In conclusion, there is an urgent need to improve the current habitat quality to protect the endangered species. The authors also emphasized on the protection of remaining Milky stork’s habitats i.e. mudflats and mangroves and the creation of buffer zone to mitigate the negative impacts that may arise from pollution activity. Keywords: Milky stork, Heavy metals, Exposure dose, Integrated assessment, Ecotoxicology, Pollution

  5. Testing of an oral dosing technique for double-crested cormorants, Phalacocorax auritus, laughing gulls, Leucophaeus atricilla, homing pigeons, Columba livia, and western sandpipers, Calidris mauri, with artificially weather MC252 oil.

    Science.gov (United States)

    Dean, K M; Cacela, D; Carney, M W; Cunningham, F L; Ellis, C; Gerson, A R; Guglielmo, C G; Hanson-Dorr, K C; Harr, K E; Healy, K A; Horak, K E; Isanhart, J P; Kennedy, L V; Link, J E; Lipton, I; McFadden, A K; Moye, J K; Perez, C R; Pritsos, C A; Pritsos, K L; Muthumalage, T; Shriner, S A; Bursian, S J

    2017-12-01

    Scoping studies were designed to determine if double-crested cormorants (Phalacocorax auritus), laughing gulls (Leucophaues atricilla), homing pigeons (Columba livia) and western sandpipers (Calidris mauri) that were gavaged with a mixture of artificially weathered MC252 oil and food for either a single day or 4-5 consecutive days showed signs of oil toxicity. Where volume allowed, samples were collected for hematology, plasma protein electrophoresis, clinical chemistry and electrolytes, oxidative stress and organ weigh changes. Double-crested cormorants, laughing gulls and western sandpipers all excreted oil within 30min of dose, while pigeons regurgitated within less than one hour of dosing. There were species differences in the effectiveness of the dosing technique, with double-crested cormorants having the greatest number of responsive endpoints at the completion of the trial. Statistically significant changes in packed cell volume, white cell counts, alkaline phosphatase, alanine aminotransferase, creatine phosphokinase, gamma glutamyl transferase, uric acid, chloride, sodium, potassium, calcium, total glutathione, glutathione disulfide, reduced glutathione, spleen and liver weights were measured in double-crested cormorants. Homing pigeons had statistically significant changes in creatine phosphokinase, total glutathione, glutathione disulfide, reduced glutathione and Trolox equivalents. Laughing gulls exhibited statistically significant decreases in spleen and kidney weight, and no changes were observed in any measurement endpoints tested in western sandpipers. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. The cormorant ear – an adaptation to underwater hearing?

    DEFF Research Database (Denmark)

    Larsen, Ole Næsbye; Wahlberg, Magnus; Christensen-Dalsgaard, Jakob

    Depending on species, diving birds may spend 2-20 minutes under water during a single foraging dive when they may reach depths ranging from one to several hundred meters. Surprisingly little is known about avian underwater hearing despite the fact that several hundred species dive for food. We do...... was similar to that reported for birds of the same size in air. The bandwidth and slopes of the audiograms were similar in air and water. However, in air the highest sensitivity was found at 1-2 kHz, whereas it was displaced towards lower frequencies under water. These results suggest that cormorants have...... rather poor in-air hearing compared to similar-sized birds. Their underwater hearing sensitivity, however, is higher than what would have been expected for purely air-adapted ears. A possible reason for the poor in-air sensitivity is the special ear anatomy with the central eardrum shaped as a rigid...

  7. Breeding biology of the Little Cormorant Phalacrocorax niger (Pelecaniformes: Phlacrocoracidae in Bangladesh

    Directory of Open Access Journals (Sweden)

    H. Naher

    2009-04-01

    Full Text Available The breeding biology of the Little Cormorant Phalacrocorax niger was studied in a nesting colony at Dhonagoda Village in Chandpur District, Bangladesh between 2003 and 2005. The breeding activities of the Little Cormorant commenced in May and continued till October. The major nesting trees of the colony included Albizzia procera, Mangifera indica, Ficus spp., Streblus asper and Cocos nucifera. Both partners took part in nest building (n=33. The nest building period was 8 to 15 days (mean� plus or minus SD 10.85� plus or minus 1.98 and the clutch size (n=20 varied from 2 to 6 (3.75� plus or minus 0.8. The length and diameter of the eggs (n=115 ranged between 4.05 and 4.98 cm (4.5� plus or minus 0.18 and 2.5 and 3.03 cm (3� plus or minus 0.07 respectively. The eggs weighed between 14g and 25g (18.4� plus or minus 0.88. The incubation period was from 14 to 21 days (17.3� plus or minus 2.1 and the weight of the hatchling varied from 4 g to 18.2g (10.45� plus or minus 3.6. The brooding period was from 15 to 20 days (17.3� plus or minus 1.26. The young flew away from the nest at the age of 17 to 29 days (20.85� plus or minus 2.8 after hatching when the weight was 350g to 470g (411.93� plus or minus 28.55. The breeding success was 78.76% in relation to eggs hatched and 68.26% in relation to eggs laid.

  8. Changes in the number of nesting pairs and breeding success of theWhite Stork Ciconia ciconia in a large city and a neighbouring rural area in South-West Poland

    Directory of Open Access Journals (Sweden)

    Kopij Grzegorz

    2017-12-01

    Full Text Available During the years 1994–2009, the number of White Stork pairs breeding in the city of Wrocław (293 km2 fluctuated between 5 pairs in 1999 and 19 pairs 2004. Most nests were clumped in two sites in the Odra river valley. Two nests were located only cca. 1 km from the city hall. The fluctuations in numbers can be linked to the availability of feeding grounds and weather. In years when grass was mowed in the Odra valley, the number of White Storks was higher than in years when the grass was left unattended. Overall, the mean number of fledglings per successful pair during the years 1995–2009 was slightly higher in the rural than in the urban area. Contrary to expectation, the mean number of fledglings per successful pair was the highest in the year of highest population density. In two rural counties adjacent to Wrocław, the number of breeding pairs was similar to that in the city in 1994/95 (15 vs. 13 pairs. However, in 2004 the number of breeding pairs in the city almost doubled compared to that in the neighboring counties (10 vs. 19 pairs. After a sharp decline between 2004 and 2008, populations in both areas were similar in 2009 (5 vs. 4 pairs, but much lower than in 1994–1995. Wrocław is probably the only large city (>100,000 people in Poland, where the White Stork has developed a sizeable, although fluctuating, breeding population. One of the most powerful role the city-nesting White Storks may play is their ability to engage directly citizens with nature and facilitate in that way environmental education and awareness.

  9. Reproductive data and analysis of recoveries in a population of white stork Ciconia ciconia in southern Spain: a 24-year study

    Directory of Open Access Journals (Sweden)

    Cuadrado, M.

    2016-01-01

    Full Text Available Changes in nest density and reproductive success of a free–ranging population of white stork (Ciconia ciconia in the Gardens of ZooBotánico Jerez (Cádiz were studied from 1990 to 2013. Reproductive data (number of nests and number of chicks per nest and the effect of rainfall on the reproductive success were analyzed. In addition, a number of chicks were colour–ringed each year and the recovery data were also analyzed. The number of nests found in the area steadily increased during the study period and varied greatly from year to year from 2001 onwards (mean 19, range = 4–35, N = 22 years. Reproductive success also varied greatly among years. Overall, the mean number of chicks per nest was 1.78 ± 1.2 (range = 0–5, N = 439 nests.Reproductive success was strongly influenced by rainfall. It was highest (1.88 in years classified as rainy, medium (1.62 in years classified as normal, and lowest (1.24 in dry years. A total of 404 white storks were ringed, 110 of which were observed a total of 308 times (2.8 + 2.8 times per bird, range 1–12, all year data pooled. Recovery data show that with one exception, all ringed birds were recorded at different habitats of S Spain throughout the year. Remarkably, none was observed at traditional wintering quarters, south of the Sahara in Africa. Juveniles remained in the area (from July to October soon after leaving our colony, and virtually all of them disappeared from November to January (their first winter but were recorded again during their first breeding season. On the contrary, adults were repeatedly recorded at different sites in Cádiz, Sevilla and Huelva all year round. These birds showed a strong philopatry as some of them were recorded as breeders in our colony, up to 11 years after ringing. Our data emphasize the importance of both refuse damp and wetland areas for the species, especially in winter, and a shift in the timing of the reproductive season as birds were recorded from November

  10. Specific accumulation of 20 trace elements in great cormorants (Phalacrocorax carbo) from Japan

    International Nuclear Information System (INIS)

    Nam, Dong-Ha; Anan, Yasumi; Ikemoto, Tokutaka; Okabe, Yuko; Kim, Eun-Young; Subramanian, Annamalai; Saeki, Kazutoshi; Tanabe, Shinsuke

    2005-01-01

    This study is to elucidate the specific accumulation of 20 trace elements in tissues/organs of great cormorants from two different colonies (Lake Biwa and Mie) in Japan. In the body distribution of trace elements, some elements revealed tissue-specific accumulation such as most of the burden of Mo, Ag and Cd in liver, Tl and Cd in kidney, Cu, Rb and Cs in muscle, and V, Sr and Ba in bone. Gender-related variation was not observed in both populations for most of the trace elements, except for higher hepatic Sr in males from Lake Biwa. Hepatic V, muscular Hg and Tl, and Cd in liver, kidney and muscle increased with growth. Comparison of trace element levels in tissues between the two colonies showed that Cr, Rb, Sr, Cd, Cs, Ba and Tl levels were higher in Lake Biwa than in Mie, whereas Zn, Co and Hg in Mie samples were greater than Lake Biwa. Variations of elemental levels in stomach contents also showed similar patterns, thus, showing that dietary sources tended to be the main factor for these regional variations. Toxic Hg and Cd concentrations in the liver of cormorants from the two colonies were lower than those from other areas, implying relatively low exposure to these metals in the present study sites. Concentrations of V, Co, Ag, Cd, Cs, Hg, Tl, Pb and Bi in liver remained more or less at the same level between 1993 and 2003, while hepatic Cr, Mn, Cu, Zn, Se, Rb, Sr and Ba showed apparent decrease, which might be related to the biological factors. - Dietary sources seemed to be the main reason for variable results

  11. A new species of Drepanocephalus Dietz, 1909 (Digenea: Echinostomatidae) from the double-crested cormorant Phalacrocorax auritus (Lesson) (Aves: Phalacrocoracidae)/nin North America

    Czech Academy of Sciences Publication Activity Database

    Kudlai, O.; Kostadinova, Aneta; Pulis, E.E.; Tkach, V.V.

    2015-01-01

    Roč. 90, č. 3 (2015), s. 221-230 ISSN 0165-5752 R&D Projects: GA ČR GBP505/12/G112 Institutional support: RVO:60077344 Keywords : neotropical cormorant * birds * trematodes Subject RIV: EG - Zoology Impact factor: 1.316, year: 2015

  12. Significance of wood extractives for wood bonding.

    Science.gov (United States)

    Roffael, Edmone

    2016-02-01

    Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

  13. Using large-scale data analysis to assess life history and behavioural traits: the case of the reintroduced White stork Ciconia ciconia population in the Netherlands

    NARCIS (Netherlands)

    Doligez, B.; Thomson, D.L.; Van Noordwijk, A.J.

    2004-01-01

    The White stork Ciconia ciconia has been the object of several successful reintroduction programmes in the last decades. As a consequence, populations have been monitored over large spatial scales. Despite these intense efforts, very few reliable estimates of life history traits are available for

  14. Exposure of the endangered Milky stork population to cadmium and lead via food and water intake in Kuala Gula Bird Sanctuary, Perak, Malaysia.

    Science.gov (United States)

    Rahman, Faid; Ismail, Ahmad; Omar, Hishamuddin; Hussin, Mohamed Zakaria

    2017-01-01

    The Milky stork is listed as an endangered species endemic to the Southeast Asia region. In Malaysia, the population is currently being reintroduced back into the wild. However, the increase of anthropogenic activity throughout the coastal area might expose the population to hazardous chemicals such as heavy metals. This study highlights the contamination of cadmium (Cd) and lead (Pb) in the Milky stork's diet. Additionally, this is the first time an integrated exposure model being used to assess heavy metal exposure risk to the population. Lead level (5.5-7.98 mg kg -1 ) in particular was relatively high compared to Cd (0.08-0.33 mg kg -1 ). This was probably related to the different niches occupied by the species in the aquatic environment. The results further show that the predicted exposure doses (through intake of both food and water) for all metals are much lower than the Tolerable Daily Intake (TDI) values. The total exposure dose for Cd was 0.11 mg kg -1  d -1 with TDI value of 0.54 mg kg -1  d -1 while Pb total exposure dose was 0.31 mg kg -1  d -1 with TDI value of 0.64 mg kg -1  d -1 . Several possible factors that could lead to the observed pattern were discussed. In conclusion, there is an urgent need to improve the current habitat quality to protect the endangered species. The authors also emphasized on the protection of remaining Milky stork's habitats i.e. mudflats and mangroves and the creation of buffer zone to mitigate the negative impacts that may arise from pollution activity.

  15. Impacts of phosphate mining on trophic level- and spatial variation of selenium and radium-226 on Florida waterbirds

    International Nuclear Information System (INIS)

    Myers, O.B.; O'Meara, T.E.

    1993-01-01

    More than 74,000 ha of the Florida landscape have been disturbed by phosphate mining operations. These operations redistribute radionuclides in the uranium-238 decay series and other potentially toxic trace elements contained in the ore matrix, making them more available for uptake by wetland birds. The authors inventoried levels of radium-226 and selenium in the tissue of wood ducks, mottled ducks, common moorhens, and double-crested cormorants collected from reference areas and from phosphate-mine wetlands. Bones of waterfowl contained from 3--4 times more radium-226 than in individuals collected at reference areas. Radium-226 in moorhen and cormorant bones were less strongly affected by mining. Waterfowl muscle tissue contained 1-2 orders of magnitude less radium-226 than in bone. Selenium concentrations were significantly higher in avian liver and kidney tissues collected from phosphate-mine wetlands compared to reference wetlands. Cormorants accumulated up to 80 ppm selenium in liver. As many as 20% of cormorants from phosphate-mine wetlands contained liver selenium concentrations at levels which have caused reproduction problems in other avian species. Waterfowl and moorhens tissues contained less selenium than cormorants, but phosphate-mine birds contained significantly more selenium than reference area birds

  16. Wood handbook : wood as an engineering material

    Science.gov (United States)

    Robert J. Ross; Forest Products Laboratory. USDA Forest Service.

    2010-01-01

    Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

  17. WOOD PROPERTIES AND EFFECT OF WOOD PROPERTIES ON THE WOOD FINISHING

    Directory of Open Access Journals (Sweden)

    Abdulkadir Malkoçoğlu

    2006-04-01

    Full Text Available Wood is basic raw material for furniture and joinery industries with wood structures. Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth condition, size of the tree at harvest, sawing, and other manufacturing processes. Wood properties have been characterized within two groups as natural and manufacturing factors that effects finishing performance. Grow rate, density, knots, moisture content, extractives and juvenile wood are natural characteristics. Grain orientation, texture, drying and performance expectations are manufacturing characteristics. In this review, the effects of natural and manufacturing characteristics are discussed on the surface finishing performance of wood.

  18. 77 FR 75947 - Endangered and Threatened Wildlife and Plants; Reclassification of the Continental U.S. Breeding...

    Science.gov (United States)

    2012-12-26

    ... The wood stork occurs in South America from northern Argentina, eastern Peru, and western Ecuador... in Brazil to eastern Peru, northern Bolivia and northern Argentina east to the Atlantic coast through... status review contains a detailed description of the species' natural history and status, including...

  19. Savannah River Ecology Laboratory annual technical progress report of ecological research, period ending July 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Vaitkus, M.R.; Wein, G.R. [eds.; Johnson, G.

    1993-11-01

    This progress report gives an overview of research programs at the Savannah River Site. Topics include; environmental operations support, wood stork foraging and breeding, defense waste processing, environmental stresses, alterations in the environment due to pollutants, wetland ecology, biodiversity, pond drawdown studies, and environmental toxicology.

  20. Wood : adhesives

    Science.gov (United States)

    A.H. Conner

    2001-01-01

    This chapter on wood adhesives includes: 1) Classification of wood adhesives 2) Thermosetting wood adhesives 3) Thermoplastic adhesives, 4) Wood adhesives based on natural sources 5) Nonconventional bonding of wood 6) Wood bonding.

  1. Input of seabird-derived nitrogen into rice-paddy fields near a breeding/roosting colony of the Great Cormorant (Phalacrocorax carbo), and its effects on wild grass

    International Nuclear Information System (INIS)

    Kazama, Kentaro; Murano, Hirotatsu; Tsuzuki, Kazuhide; Fujii, Hidenori; Niizuma, Yasuaki; Mizota, Chitoshi

    2013-01-01

    Terrestrial ecosystems near breeding/roosting colonies of piscivorous seabirds can receive a large amount of marine-derived N in the form of bird feces. It has been well demonstrated that N input from seabirds strongly affects plant communities in forests or coastal grasslands. The effects of nutrient input on plant communities in agricultural ecosystems near seabird colonies, however, have rarely been evaluated. This relationship was examined in rice-paddy fields irrigated by a pond system located near a colony of the Great Cormorant Phalacrocorax carbo in Aichi, central Japan. In the present study, spatial variations in N content (N %) and N stable isotope composition (δ 15 N) of soils and wild grass species together with the growth height of plants in paddy fields in early spring (fallow period) were examined. Soils had a higher N % and δ 15 N values in fields associated with an irrigation pond that had N input from cormorants. The δ 15 N values tended to be higher around the inlet of irrigation waters, relative to the outlet. These results indicate that cormorant-derived N was input into the paddy fields via the irrigation systems. Plants growing in soil with higher δ 15 N had higher δ 15 N in the above-ground part of the plants and had luxurious growth. A positive correlation in plant height and δ 15 N of NO 3 –N was observed in soil plough horizons.

  2. Opportunistic sampling to quantify plastics in the diet of unfledged Black Legged Kittiwakes (Rissa tridactyla), Northern Fulmars (Fulmarus glacialis) and Great Cormorants (Phalacrocorax carbo).

    Science.gov (United States)

    Acampora, Heidi; Newton, Stephen; O'Connor, Ian

    2017-06-30

    Seabirds can interact with marine litter, mainly by entanglement or ingestion. The ingestion of plastics can lead to starvation or physical damage to the digestive tract. For chicks, it could additionally lead to reduced growth, affecting survival and fledging. This study quantified the ingestion of plastics by seabird chicks via an opportunistic sampling strategy. When ringing is carried out at colonies, birds may spontaneously regurgitate their stomach contents due to the stress or as a defence mechanism. Regurgitates were collected from nestlings of three different species: Black-legged Kittiwake (Rissa tridactyla, n=38), Northern Fulmar (Fulmarus glacialis, n=14) and Great Cormorant (Phalacrocorax carbo, n=28). Plastic was present in all species, with the highest frequency of occurrence (FO) in Northern Fulmar chicks (28.6%), followed by Black-legged Kittiwakes (7.9%) and Great Cormorants (7.1%). The observed load of plastics on chicks, which have not yet left the nest, highlights the pervasive nature of plastic pollution. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Using large-scale data analysis to assess life history and behavioural traits: the case of the reintroduced White stork Ciconia ciconia population in the Netherlands

    Directory of Open Access Journals (Sweden)

    Doligez, B.

    2004-06-01

    Full Text Available The White stork Ciconia ciconia has been the object of several successful reintroduction programmes in the last decades. As a consequence, populations have been monitored over large spatial scales. Despite these intense efforts, very few reliable estimates of life history traits are available for this species. Such general knowledge however constitutes a prerequisite for investigating the consequences of conservation measures. Using the large–scale and long–term ringing and resighting data set of White storks in the Netherlands, we investigated the variation of survival and resighting rates with age, time and previous individual resighting history, and in a second step supplementary feeding, using capture–recapture models. Providing food did not seem to affect survival directly, but may have an indirect effect via the alteration of migratory behaviour. Large–scale population monitoring is important in obtaining precise and reliable estimates of life history traits and assessing the consequences of conservation measures on these traits, which will prove useful for managers to take adequate measures in future conservation strategies.

  4. Tragulidae (Artiodactyla, Ruminantia) from the Middle Miocene Chinji Formation of Pakistan

    OpenAIRE

    KHAN, Muhammad Akbar; AKHTAR, Muhammad

    2014-01-01

    In this study, Spanish Sparrows were recorded in numerous locations and specimens were collected from Samsun, Çorum, and Denizli provinces in Turkey. The breeding subpopulations preferred various nesting sites, including wooded areas and White Stork nests. These sparrows were primarily observed in flocks of variable size and were rarely solitary. The largest flock recorded was found in juniper and pine woods in Denizli. We collected data on 23 allozyme loci to compare the genetic variation am...

  5. Impact mortality of black storks (Ciconia nigra) on medium-voltage overhead power lines in Rheinland-Pfalz; Anflugverluste von Schwarzstoerchen (Ciconia nigra) an Mittelspannungsfreileitungen in Rheinland-Pfalz

    Energy Technology Data Exchange (ETDEWEB)

    Hormann, M.; Richarz, K. [Staatliche Vogelschutzwarte fuer Hessen, Rheinland-Pfalz und Saarland, Frankfurt am Main (Germany)

    1997-12-01

    The small breeding population of black storks (Ciconia nigra), which had been growing steadily since first nesting in Rhineland-Palantinate in 1982, has been observably decreasing again since 1993, particularly in its main territories. The high mortality of, for the most part, juvenile black storks resulting from collision with a overhead power line (OHL) is described (30 collision victims since the mid-1980s). The energy utilities are called upon to install underground cables on the relevant sections of the power lines in addition to modifying hazardous types of towers in order to reduce the high bird mortality rate. (orig.) [Deutsch] Fuer den seit einer Erstbrut 1982 in Rheinland-Pfalz stetig angestiegenen kleinen Brutbestand des Schwarzstorchs (Ciconia nigra) sind vor allem in seinen Kerngebieten seit 1993 wieder Bestandsrueckgaenge zu verzeichnen. Die hohen Verluste ueberwiegend junger Schwarzstoerche durch Anflug an Mittel- und Niederspannungsfreileitungen (seit Mitte der 80er Jahre 30 Schwarzstoerche als Anflugopfer) werden beschrieben. Neben der Entschaerfung gefaehrlicher Masttypen wird zur Vermeidung der hohen Anflugverluste eine Erdverkabelung der kritischen Leitungsabschnitte gefordert. (orig.)

  6. Cord Wood Testing in a Non-Catalytic Wood Stove

    Energy Technology Data Exchange (ETDEWEB)

    Butcher, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Trojanowski, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wei, G. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2014-06-30

    EPA Method 28 and the current wood stove regulations have been in-place since 1988. Recently, EPA proposed an update to the existing NSPS for wood stove regulations which includes a plan to transition from the current crib wood fuel to cord wood fuel for certification testing. Cord wood is seen as generally more representative of field conditions while the crib wood is seen as more repeatable. In any change of certification test fuel, there are questions about the impact on measured results and the correlation between tests with the two different fuels. The purpose of the work reported here is to provide data on the performance of a noncatalytic stove with cord wood. The stove selected has previously been certified with crib wood which provides a basis for comparison with cord wood. Overall, particulate emissions were found to be considerably higher with cord wood.

  7. Survey of heavy metals in internal tissues of Great cormorant collected from southern wetlands of Caspian Sea, Iran.

    Science.gov (United States)

    Aazami, Jaber; KianiMehr, Naser

    2017-12-29

    The level of mercury, iron, copper, and zinc was measured in 18 Great cormorants (Phalacrocorax carbo) collected from Anzali and Gomishan wetlands in the south of the Caspian Sea. The mean level of metals in dried tissues of the muscle, liver, and kidney was 2.26, 5.71, 3.79-Hg; 943.54, 379.97, 348.05-Fe; 42.64, 14.78, 60.79-Cu, and 71.97, 134.63, 77.82-Zn, respectively (mg/kg). There was no significant different between genders in terms of accumulation of metals, except for copper in the kidney. The results of Pearson correlation showed a positive and strong relationship between the fat in the liver and mercury (r = 0.95, R 2  = 0.90). Also, there was a significant difference between the values of all metals with the allowable limits presented in EPA, WHO, and CCME, where all of values were above standard levels. Thus, as the muscles of the bird are sometimes eaten by humans, this result is a serious warning. Nevertheless, the relatively high levels of heavy metals accumulated in different tissues of Great cormorant at that time are a result of their high weight and nourishment they have at the terminal days of their migration due to lack of natural physical activity. Regarding to the importance of heavy metals in birds, we suggest the same study to be conducted on the species in other seasons and wetlands.

  8. Poor flight performance in deep-diving cormorants.

    Science.gov (United States)

    Watanabe, Yuuki Y; Takahashi, Akinori; Sato, Katsufumi; Viviant, Morgane; Bost, Charles-André

    2011-02-01

    Aerial flight and breath-hold diving present conflicting morphological and physiological demands, and hence diving seabirds capable of flight are expected to face evolutionary trade-offs regarding locomotory performances. We tested whether Kerguelen shags Phalacrocorax verrucosus, which are remarkable divers, have poor flight capability using newly developed tags that recorded their flight air speed (the first direct measurement for wild birds) with propeller sensors, flight duration, GPS position and depth during foraging trips. Flight air speed (mean 12.7 m s(-1)) was close to the speed that minimizes power requirement, rather than energy expenditure per distance, when existing aerodynamic models were applied. Flights were short (mean 92 s), with a mean summed duration of only 24 min day(-1). Shags sometimes stayed at the sea surface without diving between flights, even on the way back to the colony, and surface durations increased with the preceding flight durations; these observations suggest that shags rested after flights. Our results indicate that their flight performance is physiologically limited, presumably compromised by their great diving capability (max. depth 94 m, duration 306 s) through their morphological adaptations for diving, including large body mass (enabling a large oxygen store), small flight muscles (to allow for large leg muscles for underwater propulsion) and short wings (to decrease air volume in the feathers and hence buoyancy). The compromise between flight and diving, as well as the local bathymetry, shape the three-dimensional foraging range (<26 km horizontally, <94 m vertically) in this bottom-feeding cormorant.

  9. Assessment of the wood waste resource and its position in the wood / wood-energy sector - Synthesis

    International Nuclear Information System (INIS)

    Guinard, Ludovic; Deroubaix, Gerard; Roux, Marie-Lise; Levet, Anne-Laure; Quint, Vincent

    2015-04-01

    The first objective of this study is to obtain a better knowledge of the 'wood wastes' issue, to propose a photography of the wood waste sector (productions, trades, consumptions), and then to elaborate different prospective scenarios on the use of wood waste volumes while taking into account possible evolutions on the medium or short term of the regulation and market of the wood/wood energy sector. The considered wastes come from industrial production, from the use of wood-based products, and from the end of life of products potentially containing wood. The authors present bibliographical sources and the adopted methodology, briefly describe the 'wood waste' system with its actors, and then report their assessment of wood wastes. They propose a global assessment as well as detailed assessments with respect to waste origins: wood trade and distribution, industries, craft, households and communities, building sector, public and private tertiary sector, packaging. They also address the collection and management of wood wastes by public services, and present the different types of valorisation (panel fabrication, energy, and others). They discuss exports, and then present different scenarios: a trend-based scenario, and two prospective scenarios with a priority to energetic valorisation or to material valorisation of wood wastes. These scenarios are compared

  10. De stand van de Ooievaar, Ciconia c. ciconia (Linné), in Nederland in 1956 (The Status of the White Stork in the Netherlands in the Year 1956)

    NARCIS (Netherlands)

    Bemmel, van A.C.V.; Schuilenburg, H.L.; Zweeres, J.J.

    1957-01-01

    The result is given of a complete census of the breeding population of the White Stork (Ciconia ciconia) in the Netherlands, performed during the year 1956. The results of the census of 1950 and 1955 have been published in Beaufortia 5 (45), April 15, 1955: 23—42, and 5 (52), March 24, 1956:

  11. De stand van de Ooievaar, Ciconia c. ciconia (Linné), in Nederland in 1955 (The status of the White Stork in the Netherlands in the year 1955)

    NARCIS (Netherlands)

    Terlingen, H.; Bemmel, van A.C.V.

    1956-01-01

    The results of a complete census of the breeding population of the White Stork (Ciconia ciconia) in the Netherlands, carried out in the year 1950 by the State Forestry Service, have been published by MÖRZER BRUIJNS and BRAAKSMA in Beaufortia 5, Nr. 45, April 15, 1955, p. 23—42. A new census was

  12. Chapter 6: Wood energy and competing wood product markers

    Science.gov (United States)

    Kenneth E. Skog; Robert C. Abt; Karen Abt

    2014-01-01

    Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

  13. Wood adhesives : vital for producing most wood products

    Science.gov (United States)

    Charles R. Frihart

    2011-01-01

    A main route for the efficient utilization of wood resources is to reduce wood to small pieces and then bond them together (Frihart and Hunt 2010). Although humankind has been bonding wood since early Egyptian civilizations, the quality and quantity of bonded wood products has increased dramatically over the past 100 years with the development of new adhesives and...

  14. Age and breeding success related to nest position in a White stork Ciconia ciconia colony

    Science.gov (United States)

    Vergara, Pablo; Aguirre, José I.

    2006-11-01

    Coloniality is a breeding system that may produce benefits in terms of breeding success, although these advantages could vary according to factors such as colony size or nest position. We studied breeder's age in relation to nest position (peripheral or central) within the colony. In addition, we studied the relationship between breeding success and nest position, controlling for breeder's age, a highly correlated factor, in a White Stork Ciconia ciconia colony over a 7-year period. Our results show that central nests are mainly occupied by adult birds and had lower failure rates. However, controlling for breeder's age, nest position per se did not explain breeding success. The scarce predation and the lack of human disturbance in the study colony could explain the absence of differences in breeding success between different nest positions within the colony.

  15. Wood frame systems for wood homes

    Directory of Open Access Journals (Sweden)

    Julio Cesar Molina

    2010-12-01

    Full Text Available The use of constructive systems that combine strength, speed, with competitive differential techniques and mainly, compromising with the environment, is becoming more popular in Brazil. The constructive system in wood frame for houses of up to five stories is very interesting, because it is a light system, structured in reforested treated wood which allows the combination of several materials, besides allowing speed in the construction and total control of the expenses already in the project phase for being industrialized. The structural behavior of the wood frame is superior to the structural masonry in strength, thermal and acoustic comfort. However, in Brazil, the wood frame is still little known and used, due to lack of technical knowledge about the system, prejudice associated the bad use of the wood as construction material, or still, in some cases, lack of normalization. The aim of this manuscript consists of presenting the main technical characteristics and advantages of the constructive system in wood frame homes, approaching the main stages of the constructive process through examples, showing the materials used in the construction, in addition the main international normative recommendations of the project. Thus, this manuscript also hopes to contribute to the popularization of the wood frame system in Brazil, since it is a competitive, fast and ecologically correct system. Moreover, nowadays, an enormous effort of the technical, commercial and industrial section has been accomplished for the development of this system in the country.

  16. Hepatic CYP1A involved in metabolism and sequestration of PCDD, PCDF and coplanar PCB congeners in common cormorants

    Energy Technology Data Exchange (ETDEWEB)

    Kubota, A.; Iwata, H.; Tanabe, S. [Ehime Univ., Matsuyama (Japan); Yoneda, K.; Tobata, S. [Japan Wildlife Research Center, Tokyo (Japan)

    2004-09-15

    Wildlife is chronically exposed to complex mixtures of dioxin-like compounds via the gastrointestinal tract, whereas laboratory animals, in most cases, are administered with single or repeated dose of a defined congener through various routes for a short period. The validity of such experimental approach for their toxicokinetics is completely unproven, and many questions still remain to be resolved. Exposure to dioxin-like compounds activates the aryl hydrocarbon receptor (AHR) and regulates the transcription of cytochrome P450 (CYP) 1A and other target genes. Altered expression of CYP1A is linked with production of reactive oxygen species and metabolic activation of PHAHs. Therefore, measurement of CYP expression levels is considered as a useful approach to assess the environmental exposure to dioxin-like compounds and their effects. Common cormorants (Phalacrocorax carbo) contained considerable amount of persistent organochlorines such as dioxin-like compounds, PCBs and DDTs. Our recent study verified contamination status of PCDD/DFs and Co-PCBs and immunochemically detected CYP1A-like protein in hepatic microsomal fraction using an anti-rat CYP1A1 polyclonal antibody. However, no comprehensive data is available on whether CYP protein expressions are influenced by PCDD/DFs and Co-PCBs, and are involved in their toxicokinetics. This study therefore investigates the effects of PCDD/DFs and Co-PCBs on CYP protein expressions in Lake Biwa populations of common cormorants. The role of CYP proteins related to congener profiles of residue concentration and tissue distribution will also be discussed.

  17. Wood

    DEFF Research Database (Denmark)

    Unterrainer, Walter

    2014-01-01

    come from? How is it harvested? How is it manufactured and treated ? How are the buildings detailed and protected against weather during construction to keep them dry and make them long-life ? In a period of climate change, forests are the last lungs of the planet to sequestrate CO2. Their global size......Wood – a sustainable building material ? For thousands of years and all over the planet, wood has been used as a building material and exciting architecture has been created in wood. The fantastic structural, physical and aesthetic properties of the material as well as the fact that wood...

  18. Wood burning

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, H

    1955-01-01

    Discussed are the use of wood as a fuel, the technique of wood combustion and the operation of wood-burning stoves for cooking and heating. In addition, there is a section which reviews the use of wood stoves in various countries and lists manufacturers of stoves, central heating furnaces and in some cases sawdust burners.

  19. Competitive outcomes between wood-decaying fungi are altered in burnt wood.

    Science.gov (United States)

    Edman, Mattias; Eriksson, Anna-Maria

    2016-06-01

    Fire is an important disturbance agent in boreal forests where it creates a wide variety of charred and other types of heat-modified dead wood substrates, yet how these substrates affect fungal community structure and development within wood is poorly understood. We allowed six species of wood-decaying basidiomycetes to compete in pairs in wood-discs that were experimentally burnt before fungal inoculation. The outcomes of interactions in burnt wood differed from those in unburnt control wood for two species:Antrodia sinuosanever lost on burnt wood and won over its competitor in 67% of the trials compared to 40% losses and 20% wins on unburnt wood. In contrast, Ischnoderma benzoinumwon all interactions on unburnt wood compared to 33% on burnt wood. However, the responses differed depending on the identity of the competing species, suggesting an interaction between competitor and substrate type. The observed shift in competitive balance between fungal species probably results from chemical changes in burnt wood, but the underlying mechanism needs further investigation. Nevertheless, the results indicate that forest fires indirectly structure fungal communities by modifying dead wood, and highlight the importance of fire-affected dead wood substrates in boreal forests. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  20. How much can the number of jabiru stork (Ciconiidae nests vary due to change of flood extension in a large Neotropical floodplain?

    Directory of Open Access Journals (Sweden)

    Guilherme Mourão

    2010-10-01

    Full Text Available The jabiru stork, Jabiru mycteria (Lichtenstein, 1819, a large, long-legged wading bird occurring in lowland wetlands from southern Mexico to northern Argentina, is considered endangered in a large portion of its distribution range. We conducted aerial surveys to estimate the number of jabiru active nests in the Brazilian Pantanal (140,000 km² in September of 1991-1993, 1998, 2000-2002, and 2004. Corrected densities of active nests were regressed against the annual hydrologic index (AHI, an index of flood extension in the Pantanal based on the water level of the Paraguay River. Annual nest density was a non-linear function of the AHI, modeled by the equation 6.5 · 10-8 · AHI1.99 (corrected r² = 0.72, n = 7. We applied this model to the AHI between 1900 and 2004. The results indicate that the number of jabiru nests may have varied from about 220 in 1971 to more than 23,000 in the nesting season of 1921, and the estimates for our study period (1991 to 2004 averaged about 12,400 nests. Our model indicates that the inter-annual variations in flooding extent can determine dramatic changes in the number of active jabiru nests. Since the jabiru stork responds negatively to drier conditions in the Pantanal, direct human-induced changes in the hydrological patterns, as well as the effects of global climate change, may strongly jeopardize the population in the region.

  1. Potential wood protection strategies using physiological requirements of wood degrading fungi

    NARCIS (Netherlands)

    Sailer, M.F.; Etten, B.D. van

    2004-01-01

    Due to the increasing restrictions in the use of wood preserving biocides a number of potential biocide free wood preserving alternatives are currently assessed. Wood degrading fungi require certain conditions in the wood in order to be able to use wood as a food source. This paper discusses the

  2. Relationships between T-cell-mediated immune response and Pb, Zn, Cu, Cd, and as concentrations in blood of nestling white storks (Ciconia ciconia) and black kites (Milvus migrans) from Doñana (southwestern Spain) after the Aznalcóllar toxic spill.

    Science.gov (United States)

    Baos, Raquel; Jovani, Roger; Forero, Manuela G; Tella, José L; Gómez, Gemma; Jiménez, Begoña; González, María J; Hiraldo, Fernando

    2006-04-01

    In the Aznalcóllar mining accident (April 1998), nearly six million cubic meters of toxic wastes were spilled in the surroundings of the Doñana National Park (southwestern Spain). The present study focused on the likely effects of metal pollution on the immune system of nestling white storks (Ciconia ciconia) and black kites (Milvus migrans) sampled in the nearby area. Using the phytohaemagglutinin skin test, we examined cell-mediated immune response (CMI) in relation to Pb, Zn, Cu, Cd, and As concentrations in blood of 281 nestling white storks and of 89 black kites. The former species was monitored along a four-year period (1999, 2001-2003), while black kites were sampled in 1999. Overall, average levels of heavy metals and As were relatively low when compared to those reported for birds in metal-polluted areas. Copper showed a negative effect on CMI in both species, although the relationship was significant only for white storks in 2002. We found no evidence that environmental exposure to Pb, Zn, As, and Cd had any effect on nestlings' CMI. Interannual consistency is revealed as an important factor, supporting the need of long-term studies when assessing the immunotoxic effects of metal exposure in the wild.

  3. The study of Forest Hara Biosphere Reserve in coast of Persian Gulf and the importance of heavy metal accumulation; Case study: feathers of great cormorant

    Directory of Open Access Journals (Sweden)

    MIR MEHRDAD MIRSANJARI

    2014-11-01

    Full Text Available Mirsanjari MM, Sheybanifar F, Arjmand F. 2014. The study of forest Hara Biosphere Reserve in coast of Persian Gulf and the importance of heavy metal accumulation; Case study: feathers of great cormorant. Nusantara Bioscience 6: 159-164. In recent years, concerns about the long term effects of heavy metals as environmental polluters have arisen, since considerable quantities of heavy metals have been released into the environment as a result of extensive human activities. Heavy metal has been determined as a serious threat to the stability of ecosystems. In this study, we examined the levels of zinc‚ copper‚ lead, and cadmium in the feathers of twenty great cormorants (Phalacrocorax carbo, collected from Hara Biosphere Reserve during November and December in 2012. The results revealed that the mean concentration of heavy metals in the feathers of males is significantly higher than females (P < 0.05. In addition‚ no significant difference was observed in heavy metal concentration between juvenile and adult birds. Moreover, according to the results, the high concentration of heavy metals in some samples indicated this fact that birds are potentially exposed to the risk of heavy metals in their habitat.

  4. Wood Identification of 18th Century Furniture. Interpreting Wood Naming Inventoires

    Directory of Open Access Journals (Sweden)

    Rocio Astrid BERNAL

    2011-09-01

    Full Text Available The 18th century Portuguese church furniture represents an extraordinary richness recognised worldwide, which demands safeguarding and valorisation. The identification of the wood of furniture artworks is the most important component for its comprehension and preservation. In this work wood anatomical characters of an 18th century Portuguese decorative furniture set from the Colegiada de São Martinho de Cedofeita, in Porto, were analysed to identify the woods used for manufacturing and to clarify their common names. Furthermore, the objectives were to recognise some of the criteria for choice of wood as well as the source of each wood. The woods identified from 16 fragments belong to Apuleia sp., Acacia sp., Neolamarckia sp. and Castanea sativa. Apuleia sp. and Acacia sp. woods most likely arrived from Brazil, while the Neolamarckia sp. woods likely arrived from India and the C. sativa woods from Portugal. The results are in accordance with the known Portuguese colonial sea routes of the 15th -18th centuries. Interestingly the terms found in the inventories can refer to finishing methods instead to the name of the woods, as for instance “oil wood” can refer to “oiled wood” or “linseed oiled wood”. The species choice may be related to the mechanical properties of the wood as well as the original tree size. Two large planks of Acacia sp. were used for the top of the “Portuguese arcaz”, and Apuleia sp. was found on main structural elements of this set of furniture, suggesting that wood colour was also important. Woods from Neolamarckia sp. and C. sativa, were also identified, being Castanea wood present only in the most recent pieces of the furniture set.

  5. Energy wood. Part 2b: Wood pellets and pellet space-heating systems

    International Nuclear Information System (INIS)

    Nussbaumer, T.

    2002-01-01

    The paper gives an overview on pellet utilization including all relevant process steps: Potential and properties of saw dust as raw material, pellet production with drying and pelletizing, standardization of wood pellets, storage and handling of pellets, combustion of wood pellets in stoves and boilers and applications for residential heating. In comparison to other wood fuels, wood pellets show several advantages: Low water content and high heating value, high energy density, and homogeneous properties thus enabling stationary combustion conditions. However, quality control is needed to ensure constant properties of the pellets and to avoid the utilization of contaminated raw materials for the pellet production. Typical data of efficiencies and emissions of pellet stoves and boilers are given and a life cycle analysis (LCA) of wood pellets in comparison to log wood and wood chips is described. The LCA shows that wood pellets are advantageous thanks to relatively low emissions. Hence, the utilization of wood pellet is proposed as a complementary technology to the combustion of wood chips and log wood. Finally, typical fuel cost of wood pellets in Switzerland are given and compared with light fuel oil. (author)

  6. Wood-related occupations, wood dust exposure, and sinonasal cancer.

    Science.gov (United States)

    Hayes, R B; Gerin, M; Raatgever, J W; de Bruyn, A

    1986-10-01

    A case-control study was conducted to examine the relations between type of woodworking and the extent of wood dust exposure to the risks for specific histologic types of sinonasal cancer. In cooperation with the major treatment centers in the Netherlands, 116 male patients newly diagnosed between 1978 and 1981 with primary malignancies of epithelial origin of this site were identified for study. Living controls were selected from the municipal registries, and deceased controls were selected from the national death registry. Interviews were completed for 91 (78%) cases and 195 (75%) controls. Job histories were coded by industry and occupation. An index of exposure was developed to classify the extent of occupational exposure to wood dust. When necessary, adjustment was made for age and usual cigarette use. The risk for nasal adenocarcinoma was elevated by industry for the wood and paper industry (odds ratio (OR) = 11.9) and by occupation for those employed in furniture and cabinet making (OR = 139.8), in factory joinery and carpentry work (OR = 16.3), and in association with high-level wood dust exposure (OR = 26.3). Other types of nasal cancer were not found to be associated with wood-related industries or occupations. A moderate excess in risk for squamous cell cancer (OR = 2.5) was associated with low-level wood dust exposure; however, no dose-response relation was evident. The association between wood dust and adenocarcinoma was strongest for those employed in wood dust-related occupations between 1930 and 1941. The risk of adenocarcinoma did not appear to decrease for at least 15 years after termination of exposure to wood dust. No cases of nasal adenocarcinoma were observed in men whose first exposure to wood dust occurred after 1941.

  7. Effect of cement/wood ratios and wood storage conditions on hydration temperature, hydration time, and compressive strength of wood-cement mixtures

    Science.gov (United States)

    Andy W.C. Lee; Zhongli Hong; Douglas R. Phillips; Chung-Yun Hse

    1987-01-01

    This study investigated the effect of cement/wood ratios and wood storage conditions on hydration temperature, hydration time, and compressive strength of wood-cement mixtures made from six wood species: southern pine, white oak, southern red oak, yellow-poplar, sweetgum, and hickory. Cement/wood ratios varied from 13/1 to 4/1. Wood storage conditions consisted of air-...

  8. Wood pellet seminar

    International Nuclear Information System (INIS)

    Aarniala, M.; Puhakka, A.

    2001-01-01

    The objective of the wood pellet seminar, arranged by OPET Finland and North Karelia Polytechnic, was to deliver information on wood pellets, pellet burners and boilers, heating systems and building, as well as on the activities of wood energy advisors. The first day of the seminar consisted of presentations of equipment and products, and of advisory desks for builders. The second day of the seminar consisted of presentations held by wood pellet experts. Pellet markets, the economy and production, the development of the pellet markets and their problems (in Austria), the economy of heating of real estates by different fuel alternatives, the production, delivery and marketing of wood pellets, the utilization of wood pellet in different utilization sites, the use of wood pellets in detached houses, pellet burners and fireplaces, and conversion of communal real estate houses to use wood pellets were discussed in the presentations. The presentations held in the third day discussed the utilization of wood pellets in power plants, the regional promotion of the production and the use of pellets. The seminar consisted also of visits to pellet manufacturing plant and two pellet burning heating plants

  9. Projected wood energy impact on US forest wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Skog, K.E. [USDA Forest Service, Madison, WI (United States)

    1993-12-31

    The USDA Forest Service has developed long-term projections of wood energy use as part of a 1993 assessment of demand for and supply of resources from forest and range lands in the United States. To assess the impact of wood energy demand on timber resources, a market equilibrium model based on linear programming was developed to project residential, industrial, commercial, and utility wood energy use from various wood energy sources: roundwood from various land sources, primary wood products mill residue, other wood residue, and black liquor. Baseline projections are driven by projected price of fossil fuels compared to price of wood fuels and the projected increase in total energy use in various end uses. Wood energy use is projected to increase from 2.67 quad in 1986 to 3.5 quad in 2030 and 3.7 quad in 2040. This is less than the DOE National Energy Strategy projection of 5.5 quad in 2030. Wood energy from forest sources (roundwood) is projected to increase from 3.1 billion (10{sup 9}) ft{sup 3} in 1986 to 4.4. billion ft{sup 3} in 2030 and 4.8 billion ft{sup 3} in 2040 (88, 124 and 136 million m{sup 3}, respectively). This rate of increase of roundwood use for fuel -- 0.8 percent per year -- is virtually the same as the projected increase rate for roundwood for pulpwood. Pulpwood roundwood is projected to increase from 4.2 billion ft{sup 3} in 1986 to 6.0 billion ft{sup 3} in 2030 and 6.4 billion ft{sup 3} in 2040 (119, 170 and 183 million m{sup 3}, respectively).

  10. Some aspects regarding the migratory dynamics of the white stork (Ciconia ciconia in the Doamnei river hydrographical basin (Argeş county, Romania

    Directory of Open Access Journals (Sweden)

    Adrian MESTECĂNEANU

    2010-11-01

    Full Text Available The authors show a part of their researches regarding the presence and the behaviour in passage of the white stork (Ciconia ciconia in the Doamnei River hydrographical basin, which covers some aspects concerning the migratory dynamics. The maximum of the passage was in April (in spring and in August (in autumn. In some years, the spring passage was belated until in July. The spring migration was more intense than the autumn migration. Other considerations about the number of individuals of the flocks, direction of the displacement, and the daily dynamics according to the lapse of time were done.

  11. Discussing implications of fast depleting rural ponds on the globally threatened wetland winter migratory bird in Haryana: a Case Study of Nigdu village pond in Karnal District

    Directory of Open Access Journals (Sweden)

    Rohtash Chand Gupta

    2013-05-01

    Full Text Available The Nigdu-Sarovar is located in Nilokheri block in Karnal district in Haryana (29°50′N 76°55′E. The duration of observations span over seven years (September, 2005 to March, 2012. The recording of wetland winter visitor birds during 2005-08 in winter season included atleast 58 species of birds belonging to 10 orders and 18 families. It is important to mention that 29 species of wetland birds were winter migratory, 17 residents, 9 local migratory and three species of wetland birds like Lesser-whistling Duck Dendrocygna javanica, Pheasant-tailed Jacana Hydrophasianus chirurgus and Blue-cheeked Bee-eater Merops persicus were summer migratory. The special features of 2005-06 winter was the huge populations of birds like Northern Shoveller Anas clypeata, Northern Pintail Anas acuta, Common Teal Anas crecca, Spot-billed Duck Anas poecilorhynchus, Common Pochard Aythya ferina, Bar-headed Goose Anser indicus, Greylag Goose Anser anser, Gadwall Anas strepera, Great Cormorant Phalacrocorax carbo, Mallard Anas platyrhynchos and Common Redshank Tringa totanus etc.In successive years, the scenario was more or less a substantial one depicting stability with respect to diversity of birds, number of birds upto the year of 2008. The popular birds included Painted Stork Mycteria leucocephala, Openbill Stork Anastomus oscitans, White-necked Stork Ciconia episcopus, Black-necked Stork Ephippiorhynchus asiaticus, Eurasian Spoonbill Platalea leucorodia, Spotted Greenshank Tringa guttifer and Kentish Plover Charadrius alexandrines. The sharp decline in winter migratory birds at “Nigdu-Sarovar” started in the year of 2008 when the pond was leased out for FISH-FARMING as per the policies of Govt. of Haryana. Fish Farming based deepening of the pond by excavation of bottom resulting in total decimation of rooted, floating, submerged and ejecting plants along with its subsidiary fauna, Zooplanktons, phytoplankton etc. The age old structural regime of the pond

  12. [Analysis of researchers' implication in a research-intervention in the Stork Network: a tool for institutional analysis].

    Science.gov (United States)

    Fortuna, Cinira Magali; Mesquita, Luana Pinho de; Matumoto, Silvia; Monceau, Gilles

    2016-09-19

    This qualitative study is based on institutional analysis as the methodological theoretical reference with the objective of analyzing researchers' implication during a research-intervention and the interferences caused by this analysis. The study involved researchers from courses in medicine, nursing, and dentistry at two universities and workers from a Regional Health Department in follow-up on the implementation of the Stork Network in São Paulo State, Brazil. The researchers worked together in the intervention and in analysis workshops, supported by an external institutional analysis. Two institutions stood out in the analysis: the research, established mainly with characteristics of neutrality, and management, with Taylorist characteristics. Differences between researchers and difficulties in identifying actions proper to network management and research were some of the interferences that were identified. The study concludes that implication analysis is a powerful tool for such studies.

  13. Levels of infection of gastric nematodes in a flock of great cormorants (Phalacrocorax carbo) from Lake Biwa, Japan.

    Science.gov (United States)

    El-Dakhly, Kh M; El-Nahass, E; Uni, S; Tuji, H; Sakai, H; Yanai, T

    2012-03-01

    A high prevalence (86.7%) of various species of nematodes was observed in the stomach of great cormorants living in Lake Biwa, Japan. There were varying numbers of adults belonging to two common genera, Eustrongylides Jagerskiold 1909 (Nematoda: Dioctophymatidae) and Contracaecum Railliet & Henry 1912 (Nematoda: Anisakidae). The first included common adenophorean nematodes comprising a single species, Eustrongylides tubifex and the second comprised ascaroid nematodes that contained four named species: Contracaecum rudolphii Hartwich, 1964, Contracaecum microcephalum Yamaguti, 1961, Contracaecum multipapillatum Drasche, 1882 and Contracaecum chubutensis Garbin, 2008. After the prevalence and intensity of the infection had been noted, both types of nematodes were frequently observed to penetrate the mucosa and intrude into the wall of the glandular stomach, where they caused gross haemorrhage and ulceration. The Eustrongylides sp. was predominantly found in a nodular lesion of the proventricular wall, while Contracaecum spp. were observed either free in the lumen of the proventriculus or, on occasion, deeply penetrating its wall. Of the Contracaecum spp., C. rudolphii was the most prevalent. Grossly, large numbers of nematodes were present in infected stomachs (for C. rudolphii intensity was 1-34 and 3-57 nematodes in male birds and 1-21 and 1-32 in females; for C. microcephalum 1-2 and 1 in male birds and 1-2 in females; for C. multipapillatum 2 in male cormorants and no infection in females; for C. chubutensis 1-2 and 1 in male birds and 1-5 and 1 in females and for E. tubifex 1-5 nematodes in male birds and 2-8 in females). Ulcerative inflammation and hyperaemia were the most common pathological presentations, especially in areas that had been invaded by parasites. Microscopically, varying degrees of granulomatous inflammatory reactions were seen, in addition to degenerated nematodes which appeared to have deeply penetrated mucosal surfaces and were surrounded by

  14. Finishing of wood

    Science.gov (United States)

    R. Sam Williams

    1999-01-01

    The primary function of any wood finish (paint, varnish, and stain, for example) is to protect the wood surface, help maintain a certain appearance, and provide a cleanable surface. Although wood can be used both outdoors and indoors without finishing, unfinished wood surfaces exposed to the weather change color, are roughened by photodegradation and surface checking,...

  15. Wood fuels utilization in Central Europe - the wood fuels consumption and the targets of utilization

    International Nuclear Information System (INIS)

    Alakangas, E.

    1999-01-01

    Following subjects are discussed in this presentation: The share of bioenergy of the total energy consumption in EU region; the wood fuels consumption in EU region in 1995; the division of bioenergy utilization (households, wood- based district heating, wood consumption in industry, power generation from wood and residues, biofuels, biogas and sludges); wood fuels consumption in households in EU countries in 1995; wood consumption in France; the additional wood fuel consumption potential in France; Blan bois - wood energy program; French wood energy markets; German wood energy markets; energy consumption in Germany; wood consumption in Bavaria; the wood fuels potential in Bavaria; wood fuels consumption in households in Bavaria; wood fuels consumption for district heating in Bavaria; fuel prices in Bavaria; Environmental regulations in Germany; small boiler markets in Germany; Energy consumption in Austria; small-scale utilization of wood fuels; utilization of wood energy. (Slides, additional information from the author)

  16. Wood construction and magnetic characteristics of impregnated type magnetic wood

    International Nuclear Information System (INIS)

    Oka, Hideo; Hojo, Atsushi; Seki, Kyoushiro; Takashiba, Toshio

    2002-01-01

    The results of experiments involving the AC and DC magnetic characteristics of impregnated type magnetic wood were studied by taking into consideration the wood construction and fiber direction. The experimental results show that the sufficient amount of impregnated magnetic fluid varies depending on the fiber direction and length, and the grain face of the wood material. The impregnated type magnetic wood sample that is fully impregnated by magnetic fluid has a 60% saturation magnetization compared to the saturation magnetization of magnetic fluid. Samples for which the wood fiber direction was the same as the direction of the magnetic path had a higher magnetization intensity and permeability

  17. Wood preservatives and pressure-treated wood: considerations for historic-preservation projects

    Science.gov (United States)

    Ronald W. Anthony; Stan T. Lebow

    2015-01-01

    Wood, an abundant resource throughout most of the world, has been used as a building material for thousands of years. Many historic buildings have been built primarily of wood, and masonry and stone buildings generally have wood elements, both structural and architectural. As a biological material, wood is both remarkably complex and yet quite durable if well...

  18. Integrated control of wood destroying basidiomycetes combining Cu-based wood preservatives and Trichoderma spp.

    Science.gov (United States)

    Ribera, Javier; Fink, Siegfried; Bas, Maria Del Carmen; Schwarze, Francis W M R

    2017-01-01

    The production of new generation of wood preservatives (without addition of a co-biocide) in combination with an exchange of wood poles on identical sites with high fungal inoculum, has resulted in an increase of premature failures of wood utility poles in the last decades. Wood destroying basidiomycetes inhabiting sites where poles have been installed, have developed resistance against wood preservatives. The objective of the in vitro studies was to identify a Trichoderma spp. with a highly antagonistic potential against wood destroying basidiomycetes that is capable of colonizing Cu-rich environments. For this purpose, the activity of five Trichoderma spp. on Cu-rich medium was evaluated according to its growth and sporulation rates. The influence of the selected Trichoderma spp. on wood colonization and degradation by five wood destroying basidiomycetes was quantitatively analyzed by means of dry weight loss of wood specimens. Furthermore, the preventative effect of the selected Trichoderma spp. in combination with four Cu-based preservatives was also examined by mass loss and histological changes in the wood specimens. Trichoderma harzianum (T-720) was considered the biocontrol agent with higher antagonistic potential to colonize Cu-rich environments (up to 0.1% CuSO4 amended medium). T. harzianum demonstrated significant preventative effect on wood specimens against four wood destroying basidiomycetes. The combined effect of T. harzianum and Cu-based wood preservatives demonstrated that after 9 months incubation with two wood destroying basidiomycetes, wood specimens treated with 3.8 kg m-3 copper-chromium had weight losses between 55-65%, whereas containers previously treated with T. harzianum had significantly lower weight losses (0-25%). Histological studies on one of the wood destroying basidiomycetes revealed typical decomposition of wood cells by brown-rot fungi in Cu-impregnated samples, that were notably absent in wood specimens previously exposed to T

  19. Integrated control of wood destroying basidiomycetes combining Cu-based wood preservatives and Trichoderma spp.

    Directory of Open Access Journals (Sweden)

    Javier Ribera

    Full Text Available The production of new generation of wood preservatives (without addition of a co-biocide in combination with an exchange of wood poles on identical sites with high fungal inoculum, has resulted in an increase of premature failures of wood utility poles in the last decades. Wood destroying basidiomycetes inhabiting sites where poles have been installed, have developed resistance against wood preservatives. The objective of the in vitro studies was to identify a Trichoderma spp. with a highly antagonistic potential against wood destroying basidiomycetes that is capable of colonizing Cu-rich environments. For this purpose, the activity of five Trichoderma spp. on Cu-rich medium was evaluated according to its growth and sporulation rates. The influence of the selected Trichoderma spp. on wood colonization and degradation by five wood destroying basidiomycetes was quantitatively analyzed by means of dry weight loss of wood specimens. Furthermore, the preventative effect of the selected Trichoderma spp. in combination with four Cu-based preservatives was also examined by mass loss and histological changes in the wood specimens. Trichoderma harzianum (T-720 was considered the biocontrol agent with higher antagonistic potential to colonize Cu-rich environments (up to 0.1% CuSO4 amended medium. T. harzianum demonstrated significant preventative effect on wood specimens against four wood destroying basidiomycetes. The combined effect of T. harzianum and Cu-based wood preservatives demonstrated that after 9 months incubation with two wood destroying basidiomycetes, wood specimens treated with 3.8 kg m-3 copper-chromium had weight losses between 55-65%, whereas containers previously treated with T. harzianum had significantly lower weight losses (0-25%. Histological studies on one of the wood destroying basidiomycetes revealed typical decomposition of wood cells by brown-rot fungi in Cu-impregnated samples, that were notably absent in wood specimens

  20. Wood composites

    Science.gov (United States)

    Lars Berglund; Roger M. Rowell

    2005-01-01

    A composite can be defined as two or more elements held together by a matrix. By this definition, what we call “solid wood” is a composite. Solid wood is a three-dimensional composite composed of cellulose, hemicelluloses and lignin (with smaller amounts of inorganics and extractives), held together by a lignin matrix. The advantages of developing wood composites are (...

  1. Bacteria in decomposing wood and their interactions with wood-decay fungi.

    Science.gov (United States)

    Johnston, Sarah R; Boddy, Lynne; Weightman, Andrew J

    2016-11-01

    The fungal community within dead wood has received considerable study, but far less attention has been paid to bacteria in the same habitat. Bacteria have long been known to inhabit decomposing wood, but much remains underexplored about their identity and ecology. Bacteria within the dead wood environment must interact with wood-decay fungi, but again, very little is known about the form this takes; there are indications of both antagonistic and beneficial interactions within this fungal microbiome. Fungi are hypothesised to play an important role in shaping bacterial communities in wood, and conversely, bacteria may affect wood-decay fungi in a variety of ways. This minireview considers what is currently known about bacteria in wood and their interactions with fungi, and proposes possible associations based on examples from other habitats. It aims to identify key knowledge gaps and pressing questions for future research. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  2. Non_standard Wood

    DEFF Research Database (Denmark)

    Tamke, Martin

    . Using parametric design tools and computer controlled production facilities Copenhagens Centre for IT and Architecture undertook a practice based research into performance based non-standard element design and mass customization techniques. In close cooperation with wood construction software......, but the integration of traditional wood craft techniques. The extensive use of self adjusting, load bearing wood-wood joints contributed to ease in production and assembly of a performance based architecture....

  3. Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour

    Directory of Open Access Journals (Sweden)

    A.A. Enayati

    2013-01-01

    Full Text Available Hemicellulose of Southern Yellow Pine wood spices was extracted by pressurized hot water at three different temperatures: 140°C, 155°C and 170°C. Compounding with PP (polypropylene was performed by extrusion after preparing wood flour and sieving to determine its mesh size. The ratio of wood to polymer was 50:50 based on oven-dry weight of wood flour. All extraction treatments and control samples were compounded under two sets of conditions, without and with 2% MAPP as coupling agent. Injection molding was used to make tensile test samples (dogbone from the pellets made by extrusion. Thermal properties of wood-plastic composites were studied by TGA and DSC while the thermal stability of pretreated wood flours, PP and MAPP were studied by TGA as well. The greater weight loss of wood materials was an indication that higher treatment temperature increases the extractability of hemicellulose. The removal of hemicellulose by extraction improves thermal stability of wood flour, especially for extraction at 170°C. Wood-plastic composites made from extracted fibers at 170°C showed the highest thermal stability. Coupling agent did not have a significant effect on thermal stability but it improved the degree of crystallinity of the composites.Surface roughness of wood fiber increased after treatment. Extraction of hemicellulose increased the degree of crystallinity but it was not significant except for samples from treated wood flour at 170°C and with MAPP.

  4. Nineteenth century mercury: Hazard to wading birds and cormorants of the Carson River, Nevada

    Science.gov (United States)

    Henny, Charles J.; Hill, E.F.; Hoffman, D.J.; Spalding, Marilyn G.; Grove, Robert A.

    2002-01-01

    Contemporary mercury interest relates to atmospheric deposition, contaminated fish stocks and exposed fish-eating wildlife. The focus is on methylmercury (MeHg) even though most contamination is of inorganic (IoHg) origin. However, IoHg is readily methylated in aquatic systems to become more hazardous to vertebrates. In response to a classic episode of historical (1859a??1890) IoHg contamination, we studied fish-eating birds nesting along the lower Carson River, Nevada. Adult double-crested cormorants (Phalacrocorax auritus), snowy egrets (Egretta thula) and black-crowned night-herons (Nycticorax nycticorax) contained very high concentrations of total mercury (THg) in their livers (geo. means 134.8g/g wet weight (ww), 43.7 and 13.5, respectively) and kidneys (69.4, 11.1 and 6.1, respectively). Apparently tolerance of these concentrations was possible due to a threshold-dependent demethylation coupled with sequestration of resultant IoHg. Demethylation and sequestration processes also appeared to have reduced the amount of MeHg redistributed to eggs. However, the relatively short time spent by adults in the contaminated area before egg laying was also a factor in lower than expected concentrations of mercury in eggs. Most eggs (100% MeHg) had concentrations below 0.80g/g ww, the putative threshold concentration where reproductive problems may be expected; there was no conclusive evidence of mercury-related depressed hatchability. After hatching, the young birds were fed diets by their parents averaging 0.36a??1.18gMeHg/g ww through fledging. During this four to six week period, accumulated mercury concentrations in the organs of the fledglings were much lower than found in adults, but evidence was detected of toxicity to their immune (spleen, thymus, bursa), detoxicating (liver, kidneys) and nervous systems. Several indications of oxidative stress were also noted in the fledglings and were most apparent in young cormorants containing highest concentrations of

  5. Nineteenth century mercury hazard to wading birds and cormorants of the Carson River, Nevada

    Science.gov (United States)

    Henny, C.J.; Hill, E.F.; Hoffman, D.J.; Spalding, M.G.; Grove, R.A.

    2002-01-01

    Contemporary mercury interest relates to atmospheric deposition, contaminated fish stocks and exposed fish-eating wildlife. The focus is on methylmercury (MeHg) even though most contamination is of inorganic (IoHg) origin. However, IoHg is readily methylated in aquatic systems to become more hazardous to vertebrates. In response to a classic episode of historical (1859-1890) IoHg contamination, we studied fish-eating birds nesting along the lower Carson River, Nevada. Adult double-crested cormorants (Phalacrocorax auritus), snowy egrets (Egretta thula) and black-crowned night-herons (Nycticorax nycticorax) contained very high concentrations of total mercury (THg) in their livers (geo. means 134.8 g/g wet weight [ww], 43.7, and 13.5, respectively) and kidneys (69.4, 11.1, and 6.1, respectively). Apparently tolerance of these concentrations was possible due to post-absorption demethylation and sequestration of resultant IoHg. Demethylation and sequestration processes also appeared to have reduced the amount of MeHg redistributed to eggs. However, the relatively short time spent by adults in the contaminated area before egg laying was also a factor in lower than expected concentrations of mercury in eggs. Most eggs (100% MeHg) had concentrations below 0.80 g/g ww, the putative threshold concentration where reproductive problems may be expected; there was no conclusive evidence of depressed hatchability. After hatching, the young birds were fed diets by their parents averaging 0.36 to 1.18 gMeHg/g ww through fledging. During this four to six week period, accumulated mercury concentrations in the organs of the fledglings were much lower than found in adults, but evidence was detected of toxicity to their immune (spleen, thymus, bursa), detoxicating (liver, kidneys) and nervous systems. Several indications of oxidative stress were also noted in the fledglings and were most apparent in young cormorants containing highest concentrations of mercury. This stress was

  6. Lignin-Retaining Transparent Wood.

    Science.gov (United States)

    Li, Yuanyuan; Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin; Berglund, Lars

    2017-09-11

    Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light-transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high-lignin-content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK -1 , and work-tofracture of 1.2 MJ m -3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy-saving buildings. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  7. Mechanics of Wood Machining

    CERN Document Server

    Csanády, Etele

    2013-01-01

    Wood is one of the most valuable materials for mankind, and since our earliest days wood materials have been widely used. Today we have modern woodworking machine and tools; however, the raw wood materials available are continuously declining. Therefore we are forced to use this precious material more economically, reducing waste wherever possible. This new textbook on the “Mechanics of Wood Machining” combines the quantitative, mathematical analysis of the mechanisms of wood processing with practical recommendations and solutions. Bringing together materials from many sources, the book contains new theoretical and experimental approaches and offers a clear and systematic overview of the theory of wood cutting, thermal loading in wood-cutting tools, dynamic behaviour of tool and work piece, optimum choice of operational parameters and energy consumption, the wear process of the tools, and the general regularities of wood surface roughness. Diagrams are provided for the quick estimation of various process ...

  8. Soil-wood interactions

    NARCIS (Netherlands)

    Wal, van der Annemieke; klein Gunnewiek, Paulien; Boer, de Wietse

    2017-01-01

    Wood-inhabiting fungi may affect soil fungal communities directly underneath decaying wood via their exploratory hyphae. In addition, differences in wood leachates between decaying tree species may influence soil fungal communities. We determined the composition of fungi in 4-yr old decaying logs

  9. Fitness consequences of timing of migration and breeding in cormorants.

    Directory of Open Access Journals (Sweden)

    Phillip Gienapp

    Full Text Available In most bird species timing of breeding affects reproductive success whereby early breeding is favoured. In migratory species migration time, especially arrival at the breeding grounds, and breeding time are expected to be correlated. Consequently, migration time should also have fitness consequences. However, in contrast to breeding time, evidence for fitness consequences of migration time is much more limited. Climate change has been shown to negatively affect the synchrony between trophic levels thereby leading to directional selection on timing but again direct evidence in avian migration time is scarce. We here analysed fitness consequences of migration and breeding time in great cormorants and tested whether climate change has led to increased selection on timing using a long-term data set from a breeding colony on the island of Vorsø (Denmark. Reproductive success, measured as number of fledglings, correlated with breeding time and arrival time at the colony and declined during the season. This seasonal decline became steeper during the study period for both migration and breeding time and was positively correlated to winter/spring climate, i.e. selection was stronger after warmer winters/springs. However, the increasing selection pressure on timing seems to be unrelated to climate change as the climatic variables that were related to selection strength did not increase during the study period. There is indirect evidence that phenology or abundances of preferred prey species have changed which could have altered selection on timing of migration and breeding.

  10. Wood energy-commercial applications

    Science.gov (United States)

    Kennel, R. P.

    1978-01-01

    Wood energy is being widely investigated in many areas of the country because of the many obvious benefits of wood fuel such as the low price per million Btus relative to coal, oil, and gas; the wide availability of noncommercial wood and the proven ability to harvest it; established technology which is reliable and free of pollution; renewable resources; better conservation for harvested land; and the potential for jobs creation. The Southeastern United States has a specific leadership role in wood energy based on its established forest products industry experience and the potential application of wood energy to other industries and institutions. Significant questions about the widespread usage of wood energy are being answered in demonstrations around the country as well as the Southeast in areas of wood storage and bulk handling; high capitalization costs for harvesting and combustion equipment; long term supply and demand contracts; and the economic feasibility of wood energy outside the forest products industry.

  11. Who's Counting Dead Wood ?

    OpenAIRE

    Woodall, C. W.; Verkerk, H.; Rondeux, Jacques; Ståhl, G.

    2009-01-01

    Dead wood in forests is a critical component of biodiversity, carbon and nutrient cycles, stand structure, and fuel loadings. Until recently, very few countries have conducted systematic inventories of dead wood resources across their forest lands. This may be changing as an increasing number of countries implement dead wood inventories. A recent survey looks at the status and attributes of forest dead wood inventories in over 60 countries. About 13 percent of countries inventory dead wood gl...

  12. Occurrence patterns of dead wood and wood-dependent lichens in managed boreal forest landscapes

    OpenAIRE

    Svensson, Måns

    2013-01-01

    Dead wood is a key resource for biodiversity, on which thousands of forest organisms are dependent. Because of current forest management, there has been a large-scale change in dead wood amounts and qualities, and consequently, many wood-dependent species are threatened. The general aim of this thesis is to increase our understanding of habitat requirements and occurrence patterns of wood-dependent lichens in managed, boreal forest landscapes. We surveyed dead wood and wood-dependent lichens ...

  13. Energy from wood - an overview

    International Nuclear Information System (INIS)

    Nussbaumer, T.

    2000-01-01

    The present publication is the introduction to a series of papers on fundamentals and applications of wood energy. It summarizes figures and data of the actual situation of fuel wood utilization in Switzerland and its potential for the future. Further, the advantages of bio-energy are discussed and the possibilities of funding for bio-energy in Switzerland are described. Wood contributes with 2.5% to the total energy demand in Switzerland nowadays. However, the utilization of wood energy can be more than doubled, which is one of the targets of the Swiss energy policy. The supply chains for the different types of fuel wood are described and specifications and prices of log wood, forestry wood chips and wood residues are presented. The main applications of wood energy are residential heating with manually operated wood boilers and stoves, on the one hand, and heat production with automatic wood furnaces in industry and communities, on the other hand. Automatic furnaces have been promoted in the past ten years and hence they contribute nowadays with more than 50% to the energy supply from wood with a further growing share. As an assistance for further information, a list of institutions and addresses in the field of wood energy in Switzerland is given in the paper. (author)

  14. Wood preservative testing

    Science.gov (United States)

    Rebecca Ibach; Stan T. Lebow

    2012-01-01

    Most wood species used in commercial and residential construction have little natural biological durability and will suffer from biodeterioration when exposed to moisture. Historically, this problem has been overcome by treating wood for outdoor use with toxic wood preservatives. As societal acceptance of chemical use changes, there is continual pressure to develop and...

  15. Wood Dust

    Science.gov (United States)

    Learn about wood dust, which can raise the risk of cancers of the paranasal sinuses and nasal cavity. High amounts of wood dust are produced in sawmills, and in the furniture-making, cabinet-making, and carpentry industries.

  16. Wood Smoke

    Science.gov (United States)

    Smoke is made up of a complex mixture of gases and fine, microscopic particles produced when wood and other organic matter burn. The biggest health threat from wood smoke comes from fine particles (also called particulate matter).

  17. Wood thermoplastic composites

    Science.gov (United States)

    Daniel F. Caulfield; Craig Clemons; Roger M. Rowell

    2010-01-01

    The wood industry can expand into new sustainable markets with the formation of a new class of composites with the marriage of the wood industry and the plastics industry. The wood component, usually a flour or fiber, is combined with a thermoplastic to form an extrudable, injectable or thermoformable composite that can be used in many non-structural applications....

  18. How spectroscopy and microspectroscopy of degraded wood contribute to understand fungal wood decay.

    Science.gov (United States)

    Fackler, Karin; Schwanninger, Manfred

    2012-11-01

    Nuclear magnetic resonance, mid and near infrared, and ultra violet (UV) spectra of wood contain information on its chemistry and composition. When solid wood samples are analysed, information on the molecular structure of the lignocellulose complex of wood e.g. crystallinity of polysaccharides and the orientation of the polymers in wood cell walls can also be gained. UV and infrared spectroscopy allow also for spatially resolved spectroscopy, and state-of-the-art mapping and imaging systems have been able to provide local information on wood chemistry and structure at the level of wood cells (with IR) or cell wall layers (with UV). During the last decades, these methods have also proven useful to follow alterations of the composition, chemistry and physics of the substrate wood after fungi had grown on it as well as changes of the interactions between the wood polymers within the lignocellulose complex caused by decay fungi. This review provides an overview on how molecular spectroscopic methods could contribute to understand these degradation processes and were able to characterise and localise fungal wood decay in its various stages starting from the incipient and early ones even if the major share of research focussed on advanced decay. Practical issues such as requirements in terms of sample preparation and sample form and present examples of optimised data analysis will also be addressed to be able to detect and characterise the generally highly variable microbial degradation processes within their highly variable substrate wood.

  19. Life cycle environmental impacts of different construction wood waste and wood packaging waste processing methods

    OpenAIRE

    Manninen, Kaisa; Judl, Jáchym; Myllymaa, Tuuli

    2016-01-01

    This study compared the life cycle environmental impacts of different wood waste processing methods in three impact categories: climate impact, acidification impacts and eutrophication impacts. The wood waste recovery methods examined were the use of wood waste in terrace boards made out of wood composite which replace impregnated terrace boards, incineration of wood waste in a multi-fuel boiler instead of peat and the use of wood waste in the production of particleboard in either Finland or ...

  20. Mathematical Simulation of Temperature Profiles within Microwave Heated Wood Made for Wood-Based Nano composites

    International Nuclear Information System (INIS)

    Li, X.; He, X.; Lv, J.; Wu, Y.; Luo, Y.; Chen, H.

    2013-01-01

    High intensive microwave pretreatment is a new method to modify wood for the fabrication of wood-based nano composites. Based on the physical law on heat transfer, a mathematical model to describe the temperature profiles within wood heated by high intensive microwave was established and simulated in this research. The results showed that the temperature profiles within wood were related to microwave heating methods; The temperature inside wood firstly increased and then gradually decreased along the direction of microwave transmission when the unilateral microwave heating was applied, and the temperature difference along the thickness direction of wood was very significant; The temperature with wood firstly increased and then gradually decreased from the wood surface to interior when the bilateral microwave heating was applied. Compared with the unilateral microwave heating, bilateral microwave heating is a better microwave heating method for the more uniform wood microwave pretreatment.

  1. Factors determining the occurrence of anthropogenic materials in nests of the white stork Ciconia ciconia.

    Science.gov (United States)

    Jagiello, Zuzanna A; Dylewski, Łukasz; Winiarska, Dominika; Zolnierowicz, Katarzyna M; Tobolka, Marcin

    2018-03-13

    Birds have been using anthropogenic materials for nest construction for the past few decades. However, there is a trade-off between the use of new nesting material, which is often linked to greater breeding success, and the higher risk of nestling mortality due to entanglement or ingestion of debris. Here, we investigate the incorporation of anthropogenic materials into nests of the white stork Ciconia ciconia, based on a long-term study of a population in Western Poland. We recorded at least one item of debris in 50 and 42% of nests at the egg and nestling stages, respectively. More debris was found in nests located in territories with higher number of anthropogenic material in the surrounding environment. We found a relationship between the age of females, the number of debris in the area surrounding a nest, and the number of debris in the nest. We found no significant effect of the total number of debris in nests on clutch size, number of fledglings, or breeding success. Studies on the influence of the age and sex of individuals in understanding this behaviour and its drivers in bird populations should be continued.

  2. Many Roles of Wood Adhesives

    Science.gov (United States)

    Charles R. Frihart

    2014-01-01

    Although wood bonding is one of the oldest applications of adhesives, going back to early recorded history (1), some aspects of wood bonds are still not fully understood. Most books in the general area of adhesives and adhesion do not cover wood bonding. However, a clearer understanding of wood bonding and wood adhesives can lead to improved products. This is important...

  3. Urban Wood Waste Resource Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, G.

    1998-11-20

    This study collected and analyzed data on urban wood waste resources in 30 randomly selected metropolitan areas in the United States. Three major categories wood wastes disposed with, or recovered from, the municipal solid waste stream; industrial wood wastes such as wood scraps and sawdust from pallet recycling, woodworking shops, and lumberyards; and wood in construction/demolition and land clearing debris.

  4. Radioactivity of Wood and Environment

    International Nuclear Information System (INIS)

    Hus, M.; Kosutic, K.; Lulic, S.

    2003-01-01

    Nuclear experiments in the atmosphere and nuclear accidents caused global deposition of artificial radionuclides in the soil of Earth's northern hemisphere, the territory of the Republic of Croatia included. Soil contamination by radionuclides resulted in their deposition in plants growing on the contaminated soil as well as in the trees. Large area of the Republic of Croatia is covered with wood, which is exploited in manufacture of industrial wood and for firewood. From approximately 3 million cubic metres of wood exploited annually, nearly one third serves for firewood. In the process of burning a smaller portion of radionuclides deposited in the wood evaporates and goes to atmosphere while a larger portion is retained in the ash. In this paper are presented the results of natural radionuclides 4 0K , 2 32T h and 2 38U as well as of artificial radionuclide 1 37C s content determination in the wood, wood briquette, charcoal and in ash remained after burning the wood, wood briquette and charcoal. The obtained results are discussed from wood radiocontamination aspect and from the aspect of potential environmental radiocontamination by the products from wood burning process. (author)

  5. Wood construction under cold climate

    DEFF Research Database (Denmark)

    Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror

    2014-01-01

    As wood constructions increasingly use engineered wood products worldwide, concerns arise about the integrity of the wood and adhesives system. The glueline stability is a crucial issue for engineered wood application, especially under cold climate. In this study, Norway spruce (Picea abies...... affected shear strength of wood joints. As temperature decreased, the shear strength decreased. PUR resin resulted in the strongest shear strength at all temperatures tested. MF resin responded to temperature changes in a similar ways as the PUR resin. The shear strength of wood joints with EPI resins...... specimens need to be tested in further work to more completely present the issue. The EN 301 and EN 302 may need to be specified based on wood species....

  6. European wood-fuel trade

    International Nuclear Information System (INIS)

    Hillring, B.; Vinterbaeck, J.

    2001-01-01

    This paper discusses research carried out during the l990s on European wood fuel trade at the Department of Forest Management and Products, SLU, in Sweden. Utilisation of wood-fuels and other biofuels increased very rapidly in some regions during that period. Biofuels are replacing fossil fuels which is an effective way to reduce the future influence of green house gases on the climate. The results indicate a rapid increase in wood-fuel trade in Europe from low levels and with a limited number of countries involved. The chief products traded are wood pellets, wood chips and recycled wood. The main trading countries are, for export, Germany and the Baltic states and, for import, Sweden, Denmark and to some extent the Netherlands. In the future, the increased use of biofuel in European countries is expected to intensify activity in this trade. (orig.)

  7. Controversy. The wood war

    International Nuclear Information System (INIS)

    James, O.

    2010-01-01

    The author comments the conflict emerging in France between industries exploiting wood for construction and those exploiting it as a heating material for power generation. The first ones accuse the others to steal their raw material, to pull the prices up, and to destabilize the sector. This conflict takes place notably around sawmill wastes which are used either by wood panel fabricators or by wood pellets producers. Both sectors are claiming they are creating more jobs than the other. The French forest indeed offers good opportunities for both sectors, but other countries which are lacking forest surfaces, are buying wood in France. Several issues are matter of discussion: burning wood seems to go against the reduction of greenhouse gas emissions, subsidies awarded to big heater projects. The situation of the wood sector in Austria, Finland and Poland is briefly presented

  8. Researches regarding the influence of the weather on the flight of the white storks (Ciconia ciconia in the spring migration across the Doamnei River hydrographical basin (Argeş County, Romania (II. Other considerations about the migration over the area.

    Directory of Open Access Journals (Sweden)

    Adrian MESTECANEANU

    2011-11-01

    Full Text Available In this last part of the series of articles concerning the migration of the white storks (Ciconia ciconia in the Doamnei River hydrographical basin, the authors make some considerations regarding the overflown areas and habitats, the aerial activity dependingon the lapse of time and the intra- and inter-specific bonds. The most individuals were observed in the hilly area, flying principally over the settlements and forests. April was the most intense month regarding the migration, the maximum of the aerial activity being between 16:00 and 17:00 for the observations per hour and between 17:00 and 18:00 for the observed individuals per hour. The birds avoided to fly on bad weather conditions and they preferred to use the soaring and gliding flights. Usually, they did not emit any sound.Rarely, the storks were temporarily accompanied in flight by other birds (Pernis apivorus, Accipiter nisus and Falco tinnunculus.

  9. Manufacture of wood-pellets doubles. Biowatti Oy started a wood pellet plant in Turenki

    International Nuclear Information System (INIS)

    Rantanen, M.

    1999-01-01

    Wood pellets have many advantages compared to other fuels. It is longest processed biofuel with favorable energy content. It is simple to use, transport and store. Heating with wood pellets is cheaper than with light fuel oil, and approximately as cheap as utilization of heavy fuel oil, about 110 FIM/MWh. The taxable price of wood pellets is about 550 FIM/t. Stokers and American iron stoves are equally suitable for combustion of wood pellets. Chip fueled stokers are preferred in Finland, but they are also suitable for the combustion of wood pellets. Wood pellets is an environmentally friendly product, because it does not increase the CO 2 load in the atmosphere, and its sulfur and soot emissions are relatively small. The wood pelletizing plant of Biowatti Oy in Turenki was started in an old sugar mill. The Turenki sugar mill was chosen because the technology of the closed sugar factory was suitable for production of wood pellets nearly as such, and required only by slight modifications. A press, designed for briquetting of sugar beat clippings makes the pellets. The Turenki mill will double the volume of wood pellet manufacture in Finland during the next few years. At the start the annual wood pellet production will be 20 000 tons, but the environmental permit allows the production to be increased to 70 000 tons. At first the mill uses planing machine chips as a raw material in the production. It is the most suitable raw material, because it is already dry (moisture content 8-10%), and all it needs is milling and pelletizing. Another possible raw material is sawdust, which moisture content is higher than with planing machine chips. Most of the wood pellets produced are exported e.g. to Sweden, Denmark and Middle Europe. In Sweden there are over 10 000 single-family houses using wood pellets. Biowatti's largest customer is a power plant located in Stockholm, which combusts annually about 200 000 tons of wood pellets

  10. Rezultati januarskega štetja vodnih ptic leta 2014 v Sloveniji / Results of the January 2014 waterbird census in Slovenia

    Directory of Open Access Journals (Sweden)

    Božič Luka

    2014-11-01

    Full Text Available In 2014, the International Waterbird Census (IWC was carried out in Slovenia on 18 and 19 Jan. Waterbirds were counted on all larger rivers, along the entire Slovenian Coastland and on most of the major standing waters in the country. During the census, in which 268 observers took part, 413 sections of the rivers and coastal sea with a total length of 1395.1 km and 226 other localities (178 standing waters and 48 streams were surveyed. Altogether, 45,346 waterbirds of 62 species were counted. This is the lowest number of waterbirds recorded after the 1997 and 1998 censuses. The greatest numbers of waterbirds were counted in the Drava count area, i.e. 20,217 individuals (44.6% of all waterbirds in Slovenia. By far the most numerous species was Mallard Anas platyrhynchos (43.0% of all waterbirds, followed by Black-headed Gull Chroicocephalus ridibundus (10.1% of all waterbirds, Coot Fulica atra (7.9% of all waterbirds, Yellow-legged Gull Larus michahellis (6.0% of all waterbirds and Cormorant Phalacrocorax carbo (4.6% of all waterbirds. The number of 1,000 counted individuals was also surpassed by Mute Swan Cygnus olor, Pochard Aythya ferina, Tufted Duck Ay. fuligula and Teal An. crecca. Among the rarer recorded species, the Black Stork Ciconia nigra (registered for the first time during the January Waterbird Censuses; only the second winter record in Slovenia, Cattle Egret Bubulcus ibis and Flamingo Phoenicopterus roseus (both registered only for the second time during the IWC should be given a special mention. Numbers of the following species were the highest so far recorded during the IWC: Shelduck Tadorna tadorna, Muscovy Duck Cairina moschata, Shoveler An. clypeata, Redthroated Loon Gavia stellata and Pygmy Cormorant Phalacrocorax pygmeus. Also, the total number of C and E category species/taxa was the highest to date, although still quite low with 70 individuals. Numbers of the following species were the lowest so far recorded during the IWC

  11. Reliable and non-destructive positioning of larvae of wood-destroying beetles in wood

    International Nuclear Information System (INIS)

    Kerner, G.; Thiele, H.; Unger, W.

    1980-01-01

    Living larvae of wood-destroying insects (house longhorn beetle, deathwatch) can be determined in wood by both X-ray technique and vibration measurements. For such examinations convenient commercial devices were used and tested under laboratory conditions. The methods complement each other and lead to a rationalization of the tests of wood preservatives against wood-destroying insects. It seems to be promising to apply the test methods also to timber already used for building

  12. Request for wood samples

    NARCIS (Netherlands)

    NN,

    1977-01-01

    In recent years the wood collection at the Rijksherbarium was greatly expanded following a renewed interest in wood anatomy as an aid for solving classification problems. Staff members of the Rijksherbarium added to the collection by taking interesting wood samples with them from their expeditions

  13. Wood fuel and the environment

    International Nuclear Information System (INIS)

    Foster, C.A.

    1992-01-01

    The purpose of this paper is to try and demonstrate the role that the use of Wood as a Fuel can play in our environment. The term ''Wood Fuel'', for the purposes of these proceedings, refers to the use of wood obtained from the forest or the farm. It does not refer to waste wood from for example buildings. The role of wood fuel in the environment can be assessed at many different levels. In this paper three different scales of ''Environment'' and the role of wood fuel in each, will be considered. These three scales are namely the global environment, the local environment, and the National (community) environment. (Author)

  14. Wood-plastic combination

    International Nuclear Information System (INIS)

    Schaudy, R.

    1978-02-01

    A review on wood-plastic combinations is given including the production (wood and plastic component, radiation hardening, curing), the obtained properties, present applications and prospects for the future of these materials. (author)

  15. Display and Sexual Activities of the Little Cormorant, Phalacrocorax niger (Ciconiformes: Phalacrocoracidae) in Captivity

    International Nuclear Information System (INIS)

    Naher, Habibon; Sarker Noor Jahan

    2008-01-01

    Display and sexual activities of the little cormorant (Phalacrocorax niger) was studied on 19 birds from November 2000 to December 2001. The study was conducted in captivity in the Dhaka Zoo, Mirpur. Displaying behavior commenced in mid February. The male took initiative to select the nest site mostly in trees especially in vertical forked branches. The twigs of peacock flower (Caesalpinia pulcherrima) were used as nesting materials. After the response of the female the bisexual displays started. During this time the male and female always sat together and displayed. Within 1 to 2 days of mutual displays the female ate regurgitated foods from the gular pouch of the male. With this the pair formation occurred permanently. Within 2 to 3 days of pair formation mounting took place. At the end of mounting the male flew away and the female jerked her body and ruffed her feathers. Then the male started to collect nesting materials but both of the male and female placed it together on to the nest, giving more or less a circular cup-like shape. The time required in nest building was 14 to 16 days. (author)

  16. Economy of wood supply

    International Nuclear Information System (INIS)

    Imponen, V.

    1993-01-01

    Research and development of wood fuels production was vigorous in the beginning of the 1980's. Techniques and working methods used in combined harvesting and transportation of energy and merchantable wood were developed in addition to separate energy wood delivery. After a ten year silent period the research on this field was started again. At present the underutilization of forest supplies and the environmental effects of energy production based on fossil fuels caused the rebeginning of the research. One alternative for reduction of the price of wood fuels at the utilization site is the integration of energy and merchantable wood deliveries together. Hence the harvesting and transportation devices can be operated effectively, and the organizational costs are decreased as well. The wood delivery costs consist of the stumpage price, the harvesting and transportation costs, and of general expenses. The stumpage price form the largest cost category (over 50 %) of the industrial merchantable wood delivery, and the harvesting and transportation costs in the case of thinningwood delivery. Forest transportation is the largest part of the delivery costs of logging residues. The general expenses, consisting of the management costs and the interest costs of the capital bound to the storages, form a remarkable cost category in delivery of low-rank wood for energy or conversion purposes. The costs caused by the harvesting of thinningwood, the logging residues, chipping and crushing, the lorry transportation are reviewed in this presentation

  17. An Analysis of the U.S. Wood Products Import Sector: Prospects for Tropical Wood Products Exporters

    Directory of Open Access Journals (Sweden)

    W.A.R.T.W. Bandara

    2012-10-01

    Full Text Available The U.S. has dramatically altered its wood product imports and exports during the past few years,and at present, it is the second largest wood product importer in the world. Hence, an understanding ofmarket structures, factors in selecting foreign suppliers, and the emphasis placed on environmentalissues/certification are critical to understand from the perspective of wood products importers in the U.S.This study provides an analysis of the U.S. wood products import sector with special emphasis on currentand future opportunities for tropical wood products exporters to the U.S. market.In this study, 158 wood products importers in the U.S. were surveyed using a mailingquestionnaire. The adjusted response rate was 40.6 percent. Results indicated that most of the respondentswere small to medium scale firms, but major importers of wood products. According to respondents,wood products to the U.S. mainly come from Brazil, Chile, and China. From the importers’ perspective,Brazilian wood products ranked first for its quality followed by wood products from Chile and Finland.Product quality, long term customer relationships, on-time delivery of orders, fair prices, and supplierreputation were the factors deemed important in selecting overseas suppliers. Majority of respondentswere importing certified wood products. FSC, SFI, and ISO 14000 were the mostly accepted certificationprograms. However, certification was not a major factor in foreign supplier selection criteria. Whenconsidered the U.S. wood products importers’ tendency to diversify their products and species imported,attractive opportunities exist for wood products suppliers from tropical countries.

  18. Wood's lamp examination

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003386.htm Wood lamp examination To use the sharing features on this page, please enable JavaScript. A Wood lamp examination is a test that uses ultraviolet ( ...

  19. Wood preservation

    Science.gov (United States)

    Rebecca E. Ibach

    1999-01-01

    When left untreated in many outdoor applications, wood becomes subject to degradation by a variety of natural causes. Although some trees possess naturally occurring resistance to decay (Ch. 3, Decay Resistance), many are in short supply or are not grown in ready proximity to markets. Because most commonly used wood species, such as Southern Pine, ponderosa pine, and...

  20. The use of new, aqueous chemical wood modifications to improve the durability of wood-plastic composites

    Science.gov (United States)

    Rebecca E. Ibach; Craig M. Clemons; George C. Chen

    2017-01-01

    The wood flour used in wood-plastic composites (WPCs) can biologically deteriorate and thus the overall mechanical performance of WPCs decrease when exposed to moisture and fungal decay. Protecting the wood flour by chemical modification can improve the durability of the wood in a nontoxic way so it is not harmful to the environment. WPCs were made with modified wood...

  1. Moisture Transport in Wood

    DEFF Research Database (Denmark)

    Astrup, Thomas; Hansen, Kurt Kielsgaard; Hoffmeyer, Preben

    2005-01-01

    Modelling of moisture transport in wood is of great importance as most mechanical and physical properties of wood depend on moisture content. Moisture transport in porous materials is often described by Ficks second law, but several observations indicate that this does not apply very well to wood....... Recently at the Technical University of Denmark, Department of Civil Engineering, a new model for moisture transport in wood has been developed. The model divides the transport into two phases, namely water vapour in the cell lumens and bound water in the cell walls....

  2. Dioxin activation of CYP1A5 promoter/enhancer regions from two avian species, common cormorant (Phalacrocorax carbo) and chicken (Gallus gallus): Association with aryl hydrocarbon receptor 1 and 2 isoforms

    International Nuclear Information System (INIS)

    Lee, Jin-Seon; Kim, Eun-Young; Iwata, Hisato

    2009-01-01

    The present study focuses on the molecular mechanism and interspecies differences in susceptibility of avian aryl hydrocarbon receptor (AHR)-cytochrome P4501A (CYP1A) signaling pathway. By the cloning of 5'-flanking regions of CYP1A5 gene from common cormorant (Phalacrocorax carbo) and chicken (Gallus gallus), seven putative xenobiotic response elements (XREs) were identified within 2.7 kb upstream region of common cormorant CYP1A5 (ccCYP1A5), and six XREs were found within 0.9 kb of chicken CYP1A5 (ckCYP1A5). Analysis of sequential deletion and mutagenesis of the binding sites in avian CYP1A5 genes by in vitro reporter gene assays revealed that two XREs at -613 bp and -1585 bp in ccCYP1A5, and one XRE at -262 bp in ckCYP1A5 conferred TCDD-responsiveness. The binding of AHR1 with AHR nuclear translocator 1 (ARNT1) to the functional XRE in a TCDD-dependent manner was verified with gel shift assays, suggesting that avian CYP1A5 is induced by TCDD through AHR1/ARNT1 signaling pathway as well as mammalian CYP1A1 but through a distinct pathway from mammalian CYP1A2, an ortholog of the CYP1A5. TCDD-EC 50 for the transcriptional activity in both cormorant AHR1- and AHR2-ccCYP1A5 reporter construct was 10-fold higher than that in chicken AHR1-ckCYP1A5 reporter construct. In contrast, chicken AHR2 showed no TCDD-dependent response. The TCDD-EC 50 for CYP1A5 transactivation was altered by switching AHR1 between the two avian species, irrespective of the species from which the regulatory region of CYP1A5 gene originates. Therefore, the structural difference in AHR, not the CYP1A5 regulatory region may be a major factor to account for the dioxin susceptibility in avian species

  3. Inside the guts of wood-eating catfishes: can they digest wood?

    Science.gov (United States)

    German, Donovan P

    2009-11-01

    To better understand the structure and function of the gastrointestinal (GI) tracts of wood-eating catfishes, the gross morphology, length, and microvilli surface area (MVSA) of the intestines of wild-caught Panaque nocturnus, P. cf. nigrolineatus "Marañon", and Hypostomus pyrineusi were measured, and contrasted against these same metrics of a closely related detritivore, Pterygoplichthys disjunctivus. All four species had anatomically unspecialized intestines with no kinks, valves, or ceca of any kind. The wood-eating catfishes had body size-corrected intestinal lengths that were 35% shorter than the detritivore. The MVSA of all four species decreased distally in the intestine, indicating that nutrient absorption preferentially takes place in the proximal and mid-intestine, consistent with digestive enzyme activity and luminal carbohydrate profiles for these same species. Wild-caught Pt. disjunctivus, and P. nigrolineatus obtained via the aquarium trade, poorly digested wood cellulose (<33% digestibility) in laboratory feeding trials, lost weight when consuming wood, and passed stained wood through their digestive tracts in less than 4 h. Furthermore, no selective retention of small particles was observed in either species in any region of the gut. Collectively, these results corroborate digestive enzyme activity profiles and gastrointestinal fermentation levels in the fishes' GI tracts, suggesting that the wood-eating catfishes are not true xylivores such as beavers and termites, but rather, are detritivores like so many other fishes from the family Loricariidae.

  4. LCA-based optimization of wood utilization under special consideration of a cascading use of wood.

    Science.gov (United States)

    Höglmeier, Karin; Steubing, Bernhard; Weber-Blaschke, Gabriele; Richter, Klaus

    2015-04-01

    Cascading, the use of the same unit of a resource in multiple successional applications, is considered as a viable means to improve the efficiency of resource utilization and to decrease environmental impacts. Wood, as a regrowing but nevertheless limited and increasingly in demand resource, can be used in cascades, thereby increasing the potential efficiency per unit of wood. This study aims to assess the influence of cascading wood utilization on optimizing the overall environmental impact of wood utilization. By combining a material flow model of existing wood applications - both for materials provision and energy production - with an algebraic optimization tool, the effects of the use of wood in cascades can be modelled and quantified based on life cycle impact assessment results for all production processes. To identify the most efficient wood allocation, the effects of a potential substitution of non-wood products were taken into account in a part of the model runs. The considered environmental indicators were global warming potential, particulate matter formation, land occupation and an aggregated single score indicator. We found that optimizing either the overall global warming potential or the value of the single score indicator of the system leads to a simultaneous relative decrease of all other considered environmental impacts. The relative differences between the impacts of the model run with and without the possibility of a cascading use of wood were 7% for global warming potential and the single score indicator, despite cascading only influencing a small part of the overall system, namely wood panel production. Cascading led to savings of up to 14% of the annual primary wood supply of the study area. We conclude that cascading can improve the overall performance of a wood utilization system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Creation of Wood Dust during Wood Processing: Size Analysis, Dust Separation, and Occupational Health

    Directory of Open Access Journals (Sweden)

    Eva Mračková

    2015-11-01

    Full Text Available Mechanical separators and fabric filters are being used to remove airborne fine particles generated during the processing and handling of wood. Such particles might have a harmful effect on employee health, not only in small- but also in large-scale wood processing facilities. The amount of wood dust and its dispersion conditions vary according to geometric boundary conditions. Thus, the dispersion conditions could be changed by changing the linear size of the particles. Moreover, the smaller the particles are, the more harmful they can be. It is necessary to become familiar with properties, from a health point of view, of wood dust generated from processing. Wood dust has to be sucked away from the processing area. The fractional separation efficiency of wood dust can be improved using exhaust and filtering devices. Filtration efficiency depends on moisture content, particle size, and device performance. Because of the carcinogenicity of wood dust, the concentration of wood dust in air has to be monitored regularly. Based on the results hereof, a conclusion can be made that both mechanical separators of types SEA and SEB as well as the fabric filters with FINET PES 1 textile are suitable for the separation of wet saw dust from all types of wooden waste produced within the process.

  6. Reactivity and burnout of wood fuels

    DEFF Research Database (Denmark)

    Dall'Ora, Michelangelo

    This thesis deals with the combustion of wood in pulverised fuel power plants. In this type of boiler, the slowest step in the wood conversion process is char combustion, which is one of the factors that not only determine the degree of fuel burnout, but also affect the heat release profile...... of different aspects relevant to wood combustion, including wood structure and composition, wood pyrolysis, wood char properties and wood char oxidation. The full scale campaign, which is the subject of Chapter 3, included sampling of wood fuel before and after milling and sampling of gas and particles...... at the top of the combustion chamber. The collected samples and data are used to obtain an evaluation of the mills in operation at the power plant, the particle size distribution of the wood fuel, as well as the char conversion attained in the furnace. In Chapter 4 an experimental investigation...

  7. Application of molecular genetic methods for identification of wood-decaying fungi in wood constructions

    OpenAIRE

    Elena Bobeková; Michal Tomšovský; Petr Horáček

    2008-01-01

    The aim of the paper is to evaluate the utilization of molecular biology methods for detection of wood decaying fungi directly from decomposed wood using a commercial DNA extraction kit developed for soil substrates (PowerSoil™ DNA isolation kit). The experiment based on dry rot fungus (Serpula lacrymans) detection from inoculated wooden pieces under laboratory conditions was followed by field detection of wood-decaying fungi from wood structures on building constructions. Fungal DNA was ide...

  8. Adhesive interactions with wood

    Science.gov (United States)

    Charles R. Frihart

    2004-01-01

    While the chemistry for the polymerization of wood adhesives has been studied systematically and extensively, the critical aspects of the interaction of adhesives with wood are less clearly understood. General theories of bond formation need to be modified to take into account the porosity of wood and the ability of chemicals to be absorbed into the cell wall....

  9. Composite structure of wood cells in petrified wood

    International Nuclear Information System (INIS)

    Nowak, Jakub; Florek, Marek; Kwiatek, Wojciech; Lekki, Janusz; Chevallier, Pierre; Zieba, Emil; Mestres, Narcis; Dutkiewicz, E.M.; Kuczumow, Andrzej

    2005-01-01

    Special kinds of petrified wood of complex structure were investigated. All the samples were composed of at least two different inorganic substances. The original cell structure was preserved in each case. The remnants of the original biological material were detected in some locations, especially in the cell walls. The complex inorganic structure was superimposed on the remnant organic network. The first inorganic component was located in the lumena (l.) of the cells while another one in the walls (w.) of the cells. The investigated arrangements were as follows: calcite (l.)-goethite-hematite (w.)-wood from Dunarobba, Italy; pyrite (l.)-calcite (w.)-wood from Lukow, Poland; goethite (l.)-silica (w.)-wood from Kwaczala, Poland. The inorganic composition was analysed and spatially located by the use of three spectral methods: electron microprobe, X-ray synchrotron-based microprobe, μ-PIXE microprobe. The accurate mappings presenting 2D distribution of the chemical species were presented for each case. Trace elements were detected and correlated with the distribution of the main elements. In addition, the identification of phases was done by the use of μ-Raman and μ-XRD techniques for selected and representative points. The possible mechanisms of the described arrangements are considered. The potential synthesis of similar structures and their possible applications are suggested

  10. Composite structure of wood cells in petrified wood

    Energy Technology Data Exchange (ETDEWEB)

    Nowak, Jakub [Department of Chemistry, Catholic University of Lublin, 20-718 Lublin (Poland); Florek, Marek [Department of Chemistry, Catholic University of Lublin, 20-718 Lublin (Poland); Kwiatek, Wojciech [Institute of Nuclear Physics, Department of Nuclear Spectroscopy, 31-342 Cracow (Poland); Lekki, Janusz [Institute of Nuclear Physics, Department of Nuclear Spectroscopy, 31-342 Cracow (Poland); Chevallier, Pierre [LPS, CEN Saclay et LURE, Universite Paris-Sud, Bat 209D, F-91405 Orsay (France); Zieba, Emil [Department of Chemistry, Catholic University of Lublin, 20-718 Lublin (Poland); Mestres, Narcis [Institut de Ciencia de Materials de Barcelona (ICMAB), Campus de la UAB, E-08193-Bellaterra (Spain); Dutkiewicz, E.M. [Institute of Nuclear Physics, Department of Nuclear Spectroscopy, 31-342 Cracow (Poland); Kuczumow, Andrzej [Department of Chemistry, Catholic University of Lublin, 20-718 Lublin (Poland)

    2005-04-28

    Special kinds of petrified wood of complex structure were investigated. All the samples were composed of at least two different inorganic substances. The original cell structure was preserved in each case. The remnants of the original biological material were detected in some locations, especially in the cell walls. The complex inorganic structure was superimposed on the remnant organic network. The first inorganic component was located in the lumena (l.) of the cells while another one in the walls (w.) of the cells. The investigated arrangements were as follows: calcite (l.)-goethite-hematite (w.)-wood from Dunarobba, Italy; pyrite (l.)-calcite (w.)-wood from Lukow, Poland; goethite (l.)-silica (w.)-wood from Kwaczala, Poland. The inorganic composition was analysed and spatially located by the use of three spectral methods: electron microprobe, X-ray synchrotron-based microprobe, {mu}-PIXE microprobe. The accurate mappings presenting 2D distribution of the chemical species were presented for each case. Trace elements were detected and correlated with the distribution of the main elements. In addition, the identification of phases was done by the use of {mu}-Raman and {mu}-XRD techniques for selected and representative points. The possible mechanisms of the described arrangements are considered. The potential synthesis of similar structures and their possible applications are suggested.

  11. Sustainable wood waste management in Nigeria

    Directory of Open Access Journals (Sweden)

    Owoyemi Jacob Mayowa

    2016-09-01

    Full Text Available Wood industries produce large volumes of residues which must be utilized, marketed or properly disposed of. Heaps of wood residues are common features in wood industries throughout the year. In Nigeria, this residue is generally regarded as waste and this has led to open burning practices, dumping in water bodies or dumping in an open area which constitutes environmental pollution. Sawmills in Nigeria generated over 1,000,000 m3 of wood waste in 2010 while about 5000 m3 of waste was generated in plywood mills. Nigeria generates about 1.8 million tons of sawdust annually and 5.2 million tons of wood wastes. The impact of improper disposal of waste wood on the environment affects both the aquatic and terrestrial ecosystems. Also burning of waste wood releases greenhouse gases into the atmosphere causing various health issues. Reuse/recycling of these wood residues in Nigeria will reduce the pressure on our ever decreasing forests, reduce environmental pollution, create wealth and employment. The literature available on this subject was reviewed and this article, therefore, focuses on the various methods of wood waste disposal and its utilization in Nigerian wood industries, the effects of wood waste on the environment as well as on human health and the benefits of proper wood waste management practices.

  12. Structure and function of wood

    Science.gov (United States)

    Alex Wiedenhoeft

    2010-01-01

    Wood is a complex biological structure, a composite of many chemistries and cell types acting together to serve the needs of a living plant. Attempting to understand wood in the context of wood technology, we have often overlooked the key and basic fact that wood evolved over the course of millions of years to serve three main functions in plants― conduction of water...

  13. Wood pellets : a worldwide fuel commodity

    International Nuclear Information System (INIS)

    Melin, S.

    2005-01-01

    Aspects of the wood pellet industry were discussed in this PowerPoint presentation. Details of wood pellets specifications were presented, and the wood pellet manufacturing process was outlined. An overview of research and development activities for wood pellets was presented, and issues concerning quality control were discussed. A chart of the effective calorific value of various fuels was provided. Data for wood pellet mill production in Canada, the United States and the European Union were provided, and various markets for Canadian wood pellets were evaluated. Residential sales as well as Canadian overseas exports were reviewed. Production revenues for British Columbia and Alberta were provided. Wood pellet heat and electricity production were discussed with reference to prefabricated boilers, stoves and fireplaces. Consumption rates, greenhouse gas (GHG) emissions, and fuel ratios for wood pellets and fossil fuels were compared. Price regulating policies for electricity and fossil fuels have prevented the domestic expansion of the wood pellet industry. There are currently no incentives for advanced biomass combustion to enter British Columbia markets, and this has led to the export of wood pellets. It was concluded that climate change mitigation policies will be a driving force behind market expansion for wood pellets. tabs., figs

  14. Acoustic and adsorption properties of submerged wood

    Science.gov (United States)

    Hilde, Calvin Patrick

    Wood is a common material for the manufacture of many products. Submerged wood, in particular, is used in niche markets, such as the creation of musical instruments. An initial study performed on submerged wood from Ootsa Lake, British Columbia, provided results that showed that the wood was not suitable for musical instruments. This thesis re-examined the submerged wood samples. After allowing the wood to age unabated in a laboratory setting, the wood was retested under the hypothesis that the physical acoustic characteristics would improve. It was shown, however, that the acoustic properties became less adequate after being left to sit. The adsorption properties of the submerged wood were examined to show that the submerged wood had a larger accessible area of wood than that of control wood samples. This implied a lower amount of crystalline area within the submerged wood. From the combined adsorption and acoustic data for the submerged wood, relationships between the moisture content and speed of sound were created and combined with previous research to create a proposed model to describe how the speed of sound varies with temperature, moisture content and the moisture content corresponding to complete hydration of sorption sites within the wood.

  15. Urban Wood Waste Resource Assessment; TOPICAL

    International Nuclear Information System (INIS)

    Wiltsee, G.

    1998-01-01

    This study collected and analyzed data on urban wood waste resources in 30 randomly selected metropolitan areas in the United States. Three major categories wood wastes disposed with, or recovered from, the municipal solid waste stream; industrial wood wastes such as wood scraps and sawdust from pallet recycling, woodworking shops, and lumberyards; and wood in construction/demolition and land clearing debris

  16. Moisture Performance of wood-plastic composites reinforced with extracted and delignified wood flour

    Science.gov (United States)

    Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan

    2014-01-01

    This study investigated the effect of using extracted and delignified wood flour on water sorption properties of wood–plastic composites. Wood flour (WF) extraction was performed with three solvent systems: toluene/ethanol (TE), acetone/water (AW), and hot water (HW); delignification was conducted using sodium chlorite/acetic acid solution. A 24 full-factorial...

  17. Survival, growth, wood basic density and wood biomass of seven ...

    African Journals Online (AJOL)

    A performance comparison of seven-year-old individuals of 13 Casuarina species/provenances in terms of survival, growth (diameter, height and volume), wood basic density and wood biomass was undertaken at Kongowe, Kibaha, Tanzania. The trial was laid out using a randomised complete block design with four ...

  18. Chapter 9: Wood Energy

    Science.gov (United States)

    Francisco X. Aguilar; Karen Abt; Branko Glavonjic; Eugene Lopatin; Warren  Mabee

    2016-01-01

    The availabilty of information on wood energy continues to improve, particularly for commoditized woodfuels.  Wood energy consumption and production vary in the UNECE region because demand is strngly affected by weather and the prices of competing energy sources.  There has been an increase in wood energy in the power-and-heat sector in the EU28 and North American...

  19. Iron Stain on Wood

    Science.gov (United States)

    Mark Knaebe

    2013-01-01

    Iron stain, an unsightly blue–black or gray discoloration, can occur on nearly all woods. Oak, redwood, cypress, and cedar are particularly prone to iron stain because these woods contain large amounts of tannin-like extractives. The discoloration is caused by a chemical reaction between extractives in the wood and iron in steel products, such as nails, screws, and...

  20. On-line automatic detection of wood pellets in pneumatically conveyed wood dust flow

    Science.gov (United States)

    Sun, Duo; Yan, Yong; Carter, Robert M.; Gao, Lingjun; Qian, Xiangchen; Lu, Gang

    2014-04-01

    This paper presents a piezoelectric transducer based system for on-line automatic detection of wood pellets in wood dust flow in pneumatic conveying pipelines. The piezoelectric transducer senses non-intrusively the collisions between wood pellets and the pipe wall. Wavelet-based denoising is adopted to eliminate environmental noise and recover the collision events. Then the wood pellets are identified by sliding a time window through the denoised signal with a suitable threshold. Experiments were carried out on a laboratory test rig and on an industrial pneumatic conveying pipeline to assess the effectiveness and operability of the system.

  1. State-of-the-art of the European regulation on wood wastes and wood ashes valorization. Synthesis

    International Nuclear Information System (INIS)

    Mousseau, S.

    2007-01-01

    This study has the objective of comparing the regulations of 10 European countries with that of France, in relation to the classification and recycling of wood waste, in particular lightly treated wood, as well as recycling of wood ash. The first part relating to wood waste presents a detailed analysis by country as well as a summary, on the one hand, of the various sectors for recycling waste wood and, on the other, the emission limits for their energy recovery. Generally, there is a distinction between waste covered by the incineration directive, and the others, without any particular category for lightly treated wood. However, recommendations emerge from this that are based essentially on the regulations or guidelines observed in Germany, Austria and the United Kingdom. The second part relating to wood ash also a presents a detailed analysis by country as well as a summary of the various sectors of recycling and limit values for spreading. Ash is generally considered as waste, and is recycled on a case-by case basis. Only Germany and Austria have clearly integrated wood ash in their regulatory framework. Overall this study shows the need for uniform regulation at European level, establishing environment requirements for recycling wood waste and wood ash, in order to encourage development of the use of biomass

  2. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)

    The intent of this article is to demonstrate how wood waste called sawdust or wood flour can be transformed by plastic moulding machine into items of economic value. Wood flour is wood reduced to very fine particle form. It can be waste product from saw mills, wood working plants or produced from selected dry wood by ...

  3. Wood wastes: Uses

    International Nuclear Information System (INIS)

    Cipro, A.

    1993-01-01

    The 1,500 industrial firms manufacturing furniture in the Italian Province of Treviso can generate up to 190,000 tonnes of wood wastes annually. In line with the energy conservation-environmental protection measures contained in Italian Law No. 475/88, this paper indicates convenient uses for these wood wastes - as a raw material for fibreboards or as a fuel to be used in the furniture manufacturing plants themselves and in kilns producing lime. Reference is made to the wood wastes gasification/power generation system being developed by ENEA (the Italian Agency for New Technology, Energy and the Environment)

  4. Fire Safety Design of Wood Structures

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    2006-01-01

    Lecture Notes on Fire Safety Design of Wood Structures including charring of wood and load bearing capacity of beams, columns, and connections.......Lecture Notes on Fire Safety Design of Wood Structures including charring of wood and load bearing capacity of beams, columns, and connections....

  5. WOOD BIOMASS FOR ENERGY IN MONTENEGRO

    Directory of Open Access Journals (Sweden)

    Gradimir Danon

    2010-01-01

    Full Text Available Wood biomass has got its place in the energy balance of Montenegro. A little more than 6% of the total energy consumption is obtained by burning wood. Along with the appropriate state measures, it is economically and environmentally justified to expect Montenegro to more than double the utilization of the existing renewable energy sources including wood biomass, in the near future. For the purpose of achieving this goal, ‘Commercial Utilisation of the Wood Residue as a Resource for Economic Development in the North of Montenegro' project was carried out in 2007. The results of this project were included in the plan of the necessary interventions of the Government and its Agencies, associations or clusters, non-government organisations and interested enterprises. The plan was made on the basis of the wood residue at disposal and the attitude of individual subjects to produce and/or use solid bio-fuels and consists of a proposal of collection and utilisation of the wood residue for each individual district in the north of Montenegro. The basic factors of sustainability of future commercialisation of the wood residue were: availability of the wood raw material, and thereby the wood residue; the development of wood-based fuel markets, and the size of the profit.

  6. Corrosion of Fasteners in Wood Treated with Newer Wood Preservatives

    Science.gov (United States)

    Samuel L. Zelinka

    2013-01-01

    This document compiles recent research findings related to corrosion of metals in preservative treated wood into a single report on corrosion of metals in wood. The research was conducted as part of the Research, Technology and Education portion of the National Historic Covered Bridge Preservation (NHCBP) Program administered by the Federal Highway Administration. The...

  7. Power generation from waste wood

    Energy Technology Data Exchange (ETDEWEB)

    Nitsche, H

    1980-04-18

    Since the energy crisis, power generation from waste wood has become increasingly important. The most profitable way to use waste wood in woodworking plants with an annual production of 100 to 150,000 m/sup 3/ solid measure of wood chips and bark is by combustion and thermal energy recovery. In plants with an annual production of 10,000 m/sup 3/ solid measure of wood chips and bark, electric power generation is a suitable application.

  8. Status of wood energy applications

    International Nuclear Information System (INIS)

    Zerbe, J.I.

    1991-01-01

    In this address, the potential of wood and wood residues to supply future energy needs is examined. In addition, the possible environmental impact of the use of wood fuels on global climate change is discussed. Technologies for the development of new fuels are described

  9. Choosing Wood Burning Appliances

    Science.gov (United States)

    Information to assist consumers in choosing a wood burning appliance, including types of appliances, the differences between certified and non-certified appliances, and alternative wood heating options.

  10. Bacterial Community Succession in Pine-Wood Decomposition.

    Science.gov (United States)

    Kielak, Anna M; Scheublin, Tanja R; Mendes, Lucas W; van Veen, Johannes A; Kuramae, Eiko E

    2016-01-01

    Though bacteria and fungi are common inhabitants of decaying wood, little is known about the relationship between bacterial and fungal community dynamics during natural wood decay. Based on previous studies involving inoculated wood blocks, strong fungal selection on bacteria abundance and community composition was expected to occur during natural wood decay. Here, we focused on bacterial and fungal community compositions in pine wood samples collected from dead trees in different stages of decomposition. We showed that bacterial communities undergo less drastic changes than fungal communities during wood decay. Furthermore, we found that bacterial community assembly was a stochastic process at initial stage of wood decay and became more deterministic in later stages, likely due to environmental factors. Moreover, composition of bacterial communities did not respond to the changes in the major fungal species present in the wood but rather to the stage of decay reflected by the wood density. We concluded that the shifts in the bacterial communities were a result of the changes in wood properties during decomposition and largely independent of the composition of the wood-decaying fungal communities.

  11. Wood power in North Carolina

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, J.G.; Guessous, L. [Research Triangle Institute, Research Triangle Park, NC (United States)

    1993-12-31

    North Carolina (NC) is one of the most forested states, and supports a major wood products industry. The NC Department of Natural Resources sponsored a study by Research Triangle Institute to examine new, productive uses of the State`s wood resources, especially electric power generation by co-firing with coal. This paper summarizes our research of the main factors influencing wood power generation opportunities, i.e., (1) electricity demand; (2) initiative and experience of developers; (3) available fuel resources; (4) incentives for alternate fuels; and (5) power plant technology and economics. The results cover NC forests, short rotation woody crops, existing wood energy facilities, electrical power requirements, and environmental regulations/incentives. Quantitative assessments are based on the interests of government agencies, utilities, electric cooperatives, developers and independent power producers, forest products industries, and the general public. Several specific, new opportunities for wood-to-electricity in the State are identified and described. Comparisons are made with nationwide resources and wood energy operations. Preferred approaches in NC are co-generation in existing or modified boilers and in dedicated wood power plants in forest industry regions. Co-firing is mainly an option for supplementing unreliable primary fuel supplies to existing boilers.

  12. The Carbon Impacts of Wood Products

    Science.gov (United States)

    Richard Bergman; Maureen Puettmann; Adam Taylor; Kenneth E. Skog

    2014-01-01

    Wood products have many environmental advantages over nonwood alternatives. Documenting and publicizing these merits helps the future competitiveness of wood when climate change impacts are being considered. The manufacture of wood products requires less fossil fuel than nonwood alternative building materials such as concrete, metals, or plastics. By nature, wood is...

  13. The influence of irradiated wood filler on some properties of polypropylene - wood composites

    Directory of Open Access Journals (Sweden)

    Điporović-Momčilović Milanka

    2007-01-01

    Full Text Available The problem of compatibility between the wood filler and thermoplastic matrix is of essential importance in composite production. Numerous methods have been developed for increasing this compatibility, which is still representing a challenging objective of composite research throughout the world. The research into these methods is primarily directed towards their efficiency from the viewpoint of the composite performance and their economical acceptability. The latter is of particular importance for the composite production in the developing countries with respect to the shortage of the corresponding funds. With this respect, the utilization of ionizing radiation might have considerable advantages. In this research, the beech wood flour was irradiated by a dose of 10 kGy of 60Co gamma rays for purpose of provoking the changes by the ionizing effect. The effects of ionizing radiation upon the properties of wood particles have been examined by IR spectroscopy and by determination of contents of hydroxyl groups in wood by acetylating as an indirect method. All these methods have been expected to reveal the chemical effects of the applied radiation treatment. The irradiated and the control wood flour were used in order to produce the samples of composite with polypropylene. The polypropylene-wood flour (PP-WF composites were produced with 40% of wood particles having fraction size 0.3 mm. The melt-blended composites were modified with amido-acrylic acid (AMACA as a new coupling agent synthesized for this propose in amount of 6 wt.% (based on wood filler and successively with 0.05 wt.% (based on PP of organic peroxide during mixing step. The composites containing coupling agents showed superior mechanical properties, compared to the untreated one. The highest extent of improvement of tensile was achieved in PP-WFl composites modified with AMACA coupling agent.

  14. Methane from wood

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, T. F.; Barreto, L.; Kypreos, S.; Stucki, S

    2005-07-15

    The role of wood-based energy technologies in the Swiss energy system in the long-term is examined using the energy-system Swiss MARKAL model. The Swiss MARKAL model is a 'bottom-up' energy-systems optimization model that allows a detailed representation of energy technologies. The model has been developed as a joint effort between the Energy Economics Group (EEG) at Paul Scherrer Institute PSI) and the University of Geneva and is currently used at PSI-EEG. Using the Swiss MARKAL model, this study examines the conditions under which wood-based energy technologies could play a role in the Swiss energy system, the most attractive pathways for their use and the policy measures that could support them. Given the involvement of PSI in the ECOGAS project, especial emphasis is put on the production of bio-SNG from wood via gasification and methanation of syngas and on hydrothermal gasification of woody biomass. Of specific interest as weIl is the fraction of fuel used in passenger cars that could be produced by locally harvested wood. The report is organized as follows: Section 2 presents a brief description of the MARKAL model. Section 3 describes the results of the base case scenario, which represents a plausible, 'middle-of-the-road' development of the Swiss energy system. Section 4 discusses results illustrating the conditions under which the wood-based methanation technology could become competitive in the Swiss energy market, the role of oil and gas prices, subsidies to methanation technologies and the introduction of a competing technology, namely the wood-based Fischer-Tropsch synthesis. FinaIly, section 5 outlines some conclusions from this analysis. (author)

  15. Methane from wood

    International Nuclear Information System (INIS)

    Schulz, T. F.; Barreto, L.; Kypreos, S.; Stucki, S.

    2005-07-01

    The role of wood-based energy technologies in the Swiss energy system in the long-term is examined using the energy-system Swiss MARKAL model. The Swiss MARKAL model is a 'bottom-up' energy-systems optimization model that allows a detailed representation of energy technologies. The model has been developed as a joint effort between the Energy Economics Group (EEG) at Paul Scherrer Institute PSI) and the University of Geneva and is currently used at PSI-EEG. Using the Swiss MARKAL model, this study examines the conditions under which wood-based energy technologies could play a role in the Swiss energy system, the most attractive pathways for their use and the policy measures that could support them. Given the involvement of PSI in the ECOGAS project, especial emphasis is put on the production of bio-SNG from wood via gasification and methanation of syngas and on hydrothermal gasification of woody biomass. Of specific interest as weIl is the fraction of fuel used in passenger cars that could be produced by locally harvested wood. The report is organized as follows: Section 2 presents a brief description of the MARKAL model. Section 3 describes the results of the base case scenario, which represents a plausible, 'middle-of-the-road' development of the Swiss energy system. Section 4 discusses results illustrating the conditions under which the wood-based methanation technology could become competitive in the Swiss energy market, the role of oil and gas prices, subsidies to methanation technologies and the introduction of a competing technology, namely the wood-based Fischer-Tropsch synthesis. FinaIly, section 5 outlines some conclusions from this analysis. (author)

  16. Temperature effects on wood anatomy, wood density, photosynthesis and biomass partitioning of Eucalyptus grandis seedlings.

    Science.gov (United States)

    Thomas, D S; Montagu, K D; Conroy, J P

    2007-02-01

    Wood density, a gross measure of wood mass relative to wood volume, is important in our understanding of stem volume growth, carbon sequestration and leaf water supply. Disproportionate changes in the ratio of wood mass to volume may occur at the level of the whole stem or the individual cell. In general, there is a positive relationship between temperature and wood density of eucalypts, although this relationship has broken down in recent years with wood density decreasing as global temperatures have risen. To determine the anatomical causes of the effects of temperature on wood density, Eucalyptus grandis W. Hill ex Maiden seedlings were grown in controlled-environment cabinets at constant temperatures from 10 to 35 degrees C. The 20% increase in wood density of E. grandis seedlings grown at the higher temperatures was variously related to a 40% reduction in lumen area of xylem vessels, a 10% reduction in the lumen area of fiber cells and a 10% increase in fiber cell wall thickness. The changes in cell wall characteristics could be considered analogous to changes in carbon supply. Lumen area of fiber cells declined because of reduced fiber cell expansion and increased fiber cell wall thickening. Fiber cell wall thickness was positively related to canopy CO2 assimilation rate (Ac), which increased 26-fold because of a 24-fold increase in leaf area and a doubling in leaf CO2 assimilation rate from minima at 10 and 35 degrees C to maxima at 25 and 30 degrees C. Increased Ac increased seedling volume, biomass and wood density; but increased wood density was also related to a shift in partitioning of seedling biomass from roots to stems as temperature increased.

  17. The central role of wood biology in understanding the durability of wood-coating interactions

    Science.gov (United States)

    Alex C. Wiedenhoeft

    2007-01-01

    To design effectively for durability, one must actively and honestly assess the material properties and limitations of each of the components in the design system; wood or wood composite, and the coating. Inasmuch as wood coatings are manufactured to specified tolerances from known materials, we have control of that component of the system. Compared to manmade...

  18. Wood as a home heating fuel

    International Nuclear Information System (INIS)

    Wood, K.

    1991-01-01

    This article describes the development of clean-burning technology in three types of wood-burning appliances: catalytic, non-catalytic, and pellet stoves. A recent study by the Washington State Energy Extension Office concluded that in homes that use both electricity and wood, 73 megawatts of electricity/yr were saved by using wood. Since wood-burning stoves can now meet air quality standards, wood could be considered to be a greenhouse-neutral fuel if more trees are planted as they are consumed

  19. Microbial Communities in Sunken Wood Are Structured by Wood-Boring Bivalves and Location in a Submarine Canyon

    Science.gov (United States)

    Fagervold, Sonja K.; Romano, Chiara; Kalenitchenko, Dimitri; Borowski, Christian; Nunes-Jorge, Amandine; Martin, Daniel; Galand, Pierre E.

    2014-01-01

    The cornerstones of sunken wood ecosystems are microorganisms involved in cellulose degradation. These can either be free-living microorganisms in the wood matrix or symbiotic bacteria associated with wood-boring bivalves such as emblematic species of Xylophaga, the most common deep-sea woodborer. Here we use experimentally submerged pine wood, placed in and outside the Mediterranean submarine Blanes Canyon, to compare the microbial communities on the wood, in fecal pellets of Xylophaga spp. and associated with the gills of these animals. Analyses based on tag pyrosequencing of the 16S rRNA bacterial gene showed that sunken wood contained three distinct microbial communities. Wood and pellet communities were different from each other suggesting that Xylophaga spp. create new microbial niches by excreting fecal pellets into their burrows. In turn, gills of Xylophaga spp. contain potential bacterial symbionts, as illustrated by the presence of sequences closely related to symbiotic bacteria found in other wood eating marine invertebrates. Finally, we found that sunken wood communities inside the canyon were different and more diverse than the ones outside the canyon. This finding extends to the microbial world the view that submarine canyons are sites of diverse marine life. PMID:24805961

  20. Application of molecular genetic methods for identification of wood-decaying fungi in wood constructions

    Directory of Open Access Journals (Sweden)

    Elena Bobeková

    2008-01-01

    Full Text Available The aim of the paper is to evaluate the utilization of molecular biology methods for detection of wood decaying fungi directly from decomposed wood using a commercial DNA extraction kit developed for soil substrates (PowerSoil™ DNA isolation kit. The experiment based on dry rot fungus (Serpula lacrymans detection from inoculated wooden pieces under laboratory conditions was followed by field detection of wood-decaying fungi from wood structures on building constructions. Fungal DNA was identified using the PCR–based methods including species-specific PCR and sequencing of amplified ITS region of ribosomal DNA.

  1. Wood plastic combination

    International Nuclear Information System (INIS)

    Cunanan, S.A.; Bonoan, L.S.; Verceluz, F.P.; Azucena, E.A.

    1976-03-01

    The purpose of this study is to improve the physical and mechaniproperties of local inferior quality wood species by radiation-induced graft polymerization with plastic monomers. The process involves the following: 1) Preparation of sample; 2) Impregnation of sample with the monomers; 3) Irradiation of the impregnated sample with the use of 20,000 curie Co-60 as gamma-source; 4) Drying of irradiated sample to remove the unpolymerized monomer. Experimentation on different wood species were undertaken and the results given. From the results obtained, it can be concluded that the monomers systems MMA, MMA-USP, and styrene-USP are suitable for graft polymerization with the wood species almon, apitong, bagtikan, mayapis, red lauan, and tanguile. This is shown by their maximum conversion value which range from 86% to 96% with the optimum dose range of 1 to 2 Mrads. However, in the application of WPC process, properties that are required in a given wood product must be considered, thus aid in the selection of the monomer system to be used with a particular wood species. Some promising applications of WPC is in the manufacture of picker sticks, shuttles, and bobbins for the textile industry. However, there is a need for a pilot plant scale study so that an economic assessment of the commercial feasibility of this process can be made

  2. FLEXURAL TESTING OF WOOD-CONCRETE COMPOSITE BEAM MADE FROM KAMPER AND BANGKIRAI WOOD

    Directory of Open Access Journals (Sweden)

    Fengky Satria Yoresta

    2015-07-01

    Full Text Available Certain wood has a tensile strength that almost equal with steel rebar in reinforced concrete beams. This research aims to understand the capacity and flexural behavior of concrete beams reinforced by wood (wood-concrete composite beam. Two different types of beams based on placement positions of wood layers are proposed in this study. Two kinds of wood used are consisted of Bangkirai (Shorea laevifolia and Kamper (Cinnamomum camphora, meanwhile the concrete mix ratio for all beams is 1 cement : 2 fine aggregates : 3 coarse aggregates. Bending test is conducted by using one-point loading method. The results show that composite beam using Bangkirai wood is stronger than beams using Kamper wood. More thicker wood layer in tensile area will increase the flexural strength of beams. Crack patterns identified could be classified into flexural cracks, shear cracks, and split on wood layer   Beberapa jenis kayu tertentu memiliki kekuatan tarik yang hampir sama dengan tulangan baja pada balok beton bertulang. Penelitian ini bertujuan memahami kapasitas dan perilaku lentur balok beton bertulang yang diperkuat menggunakan kayu (balok komposit beton-kayu. Dua tipe balok yang berbeda berdasarkan posisi penempatan kayu digunakan dalam penelitian ini. Dua jenis kayu yang digunakan adalah kayu Bangkirai (Shorea laevifolia and Kamper (Cinnamomum camphora, sementara itu rasio campuran beton untuk semua balok menggunakan perbandingan 1 semen : 2 agregat halus : 3 agregat kasar. Pengujian lentur dilakukan menggunakan metode one-point loading. Hasil penelitian menunjukkan bahwa balok komposit dengan kayu Bangkirai lebih kuat dibandingkan balok dengan kayu Kamper. Semakin tebal lapisan kayu yang berada di daerah tarik akan meningkatkan kekuatan lentur balok. Pola kerusakan yang teridentifikasi dapat diklasifikasikan menjadi retak lentur, retak geser, dan pecah pada kayu REFERENCES Boen T. (2010. Retrofitting Simple Buildings Damaged by Earthquakes. World Seismic

  3. The case for wood-fuelled heating

    International Nuclear Information System (INIS)

    Bent, Ewan

    2001-01-01

    This article looks at the wood heating industry in the UK and examines the heat market and the growth potential in the domestic, public, agricultural and commercial sectors. The current status of wood-fueled heating technology is considered, along with log and chip boilers, and the use of pellet fuel. The economics of wood-fuelled heating, the higher level of utilisation of wood-fuelled heating by utilities in northern European countries compared with the UK, and the barriers to the exploitation of wood fuelled heating are examined

  4. Bacterial community succession in pine-wood decomposition

    Directory of Open Access Journals (Sweden)

    Anna eKielak

    2016-03-01

    Full Text Available Though bacteria and fungi are common inhabitants of decaying wood, little is known about the relationship between bacterial and fungal community dynamics during natural wood decay. Based on previous studies involving inoculated wood blocks, strong fungal selection on bacteria abundance and community composition was expected to occur during natural wood decay. Here we focused on bacterial and fungal community compositions in pine wood samples collected from dead trees in different stages of decomposition. We showed that bacterial communities undergo less drastic changes than fungal communities during wood decay. Furthermore, we found that bacterial community assembly was a stochastic process at initial stage of wood decay and became more deterministic in later stages, likely due to environmental factors. Moreover, composition of bacterial communities did not respond to the changes in the major fungal species present in the wood but rather to the stage of decay reflected by the wood density. We concluded that the shifts in the bacterial communities were a result of the changes in wood properties during decomposition and largely independent of the composition of the wood-decaying fungal communities.

  5. Macrophotographic wood atlas of Annonaceae.

    NARCIS (Netherlands)

    Koek-Noorman, J.; Westra, L.I.T.

    2012-01-01

    In this article, a general description of the microscopic wood anatomy of Annonaceae is given. We provide a description of the wood anatomical features of the family and of all subfamilies and tribes, all from material in the Utrecht Wood collection. Hand-lens images can be an important help in

  6. The challenge of bonding treated wood

    Science.gov (United States)

    Charles R. Frihart

    2004-01-01

    Wood products are quite durable if exposure to moisture is minimized; however, most uses of wood involve considerable exposure to moisture. To preserve the wood, chemicals are used to minimize moisture pickup, to prevent insect attack, and/or to resist microbial growth. The chemicals used as preservatives can interfere with adhesive bonds to wood. Given the many...

  7. FIRE INSURANCE AND WOOD SCHOOL BUILDINGS.

    Science.gov (United States)

    PURCELL, FRANK X.

    A COMPARISON OF FIRE INSURANCE COSTS OF WOOD, MASONRY, STEEL AND CONCRETE STRUCTURES SHOWS FIRE INSURANCE PREMIMUMS ON WOOD STRUCTURES TEND TO BE HIGHER THAN PREMIUMS ON MASONRY, STEEL AND CONCRETE BUILDINGS, HOWEVER, THE INITIAL COST OF THE WOOD BUILDINGS IS LOWER. DATA SHOW THAT THE SAVINGS ACHIEVED IN THE INITIAL COST OF WOOD STRUCTURES OFFSET…

  8. Physical and mechanical properties of bio-composites from wood particles and liquefied wood resin

    Science.gov (United States)

    Hui Pan; Todd F. Shupe; Chung-Yun Hse

    2009-01-01

    Compression molded composites were made from wood particles and a liquefied wood/phenol/formaldehyde co-condensed resin. Based on our previous research, a phenol to wood (P/W) ratio of 2/1 was chosen for this study. The two experimental variables selected were: 1) liquefaction temperature (150o and 180oC) and 2) cooking method (atmospheric and sealed). Panels were...

  9. The wood energy in France

    International Nuclear Information System (INIS)

    Douard, F.; Oremus, Y.; Garsault-Fabbi, A.

    2007-01-01

    The program law fixing the energy policy (POPE Law of the 13 july 2005) fixes an objective of 50% of growth for the renewable heat. As this renewable heat is today generated by the biomass, it seems necessary to adjust all the efforts on this sector. This document proposes to takes stock on the wood energy in France. It presents the wood fuels, an evaluation of the Wood-Energy Plan decided by the ADEME in 2000, the wood heat networks, and some example of installations. (A.L.B.)

  10. An assessment of management practices of wood and wood-related wastes in the urban environment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The US Environmental Protection Agency estimates that yard waste{sup 1} accounts for approximately 16% of the municipal solid waste (MSW) stream (US EPA, 1994). Until recently, specific data and related information on this component of the (MSW) stream has been limited. The purposes of this study, phase two of the three-phase assessment of urban wood waste issues, are to assess and describe current alternatives to landfills for urban wood waste management; provide guidance on the management of urban wood waste to organizations that produce or manage wood waste; and clarify state regulatory and policy positions affecting these organizations. For this study, urban wood waste is defined as solid waste generated by tree and landscape maintenance services (public and private). Urban wood waste includes the following materials: unchipped mixed wood, unchipped logs, and unchipped tops and brush; clearing and grubbing waste; fall leaves and grass clippings; and chips and whole stumps. Construction and demolition debris and consumer-generated yard waste are not included in this study. Generators of urban wood waste include various organizations; municipal, county, and commercial tree care divisions; nurseries, orchards, and golf courses; municipal park and recreation departments; and electric and telephone utility power line maintenance, excavator and land clearance, and landscape organizations. (1) US EPA defines yard waste as ''yard trimmings'' which includes ''grass, leaves and tree brush trimmings from residential, institutional, and commercial sources.''

  11. Complex geometries in wood

    DEFF Research Database (Denmark)

    Tamke, Martin; Ramsgaard Thomsen, Mette; Riiber Nielsen, Jacob

    2009-01-01

    The versatility of wood constructions and traditional wood joints for the production of non standard elements was in focus of a design based research. Herein we established a seamless process from digital design to fabrication. A first research phase centered on the development of a robust...... parametric model and a generic design language a later explored the possibilities to construct complex shaped geometries with self registering joints on modern wood crafting machines. The research was carried out as collaboration with industrial partners....

  12. Tracing nitrogen accumulation in decaying wood and examining its impact on wood decomposition rate

    Science.gov (United States)

    Rinne, Katja T.; Rajala, Tiina; Peltoniemi, Krista; Chen, Janet; Smolander, Aino; Mäkipää, Raisa

    2016-04-01

    Decomposition of dead wood, which is controlled primarily by fungi is important for ecosystem carbon cycle and has potentially a significant role in nitrogen fixation via diazotrophs. Nitrogen content has been found to increase with advancing wood decay in several studies; however, the importance of this increase to decay rate and the sources of external nitrogen remain unclear. Improved knowledge of the temporal dynamics of wood decomposition rate and nitrogen accumulation in wood as well as the drivers of the two processes would be important for carbon and nitrogen models dealing with ecosystem responses to climate change. To tackle these questions we applied several analytical methods on Norway spruce logs from Lapinjärvi, Finland. We incubated wood samples (density classes from I to V, n=49) in different temperatures (from 8.5oC to 41oC, n=7). After a common seven day pre-incubation period at 14.5oC, the bottles were incubated six days in their designated temperature prior to CO2 flux measurements with GC to determine the decomposition rate. N2 fixation was measured with acetylene reduction assay after further 48 hour incubation. In addition, fungal DNA, (MiSeq Illumina) δ15N and N% composition of wood for samples incubated at 14.5oC were determined. Radiocarbon method was applied to obtain age distribution for the density classes. The asymbiotic N2 fixation rate was clearly dependent on the stage of wood decay and increased from stage I to stage IV but was substantially reduced in stage V. CO2 production was highest in the intermediate decay stage (classes II-IV). Both N2 fixation and CO2 production were highly temperature sensitive having optima in temperature 25oC and 31oC, respectively. We calculated the variation of annual levels of respiration and N2 fixation per hectare for the study site, and used the latter data together with the 14C results to determine the amount of N2 accumulated in wood in time. The proportion of total nitrogen in wood

  13. Anatomy and histochemistry of spread-wing posture in birds. I. Wing drying posture in the double-crested cormorant, Phalacrocorax auritus.

    Science.gov (United States)

    Meyers, Ron A

    1997-07-01

    Spread-wing postures of birds often have been studied with respect to the function of behavior, but ignored with regard to the mechanism by which the birds accomplish posture. The double-crested cormorant, Phalacrocorax auritus, was used as a model for this study of spread-wing posture. Those muscles capable of positioning and maintaining the wing in extension and protraction were assayed histochemically for the presence of slow (postural) muscle fibers. Within the forelimb of Phalacrocorax, Mm. coracobrachialis cranialis, pectoralis thoracicus (cranial portion), deltoideus minor, triceps scapularis, and extensor metacarpi radialis pars dorsalis and ventralis were found to contain populations of slow-twitch or slow-tonic muscle fibers. These slow fibers in the above muscles are considered to function during spread-wing posture in this species. J Morphol 233:67-76, 1997. © 1997 Wiley-Liss, Inc. Copyright © 1997 Wiley-Liss, Inc.

  14. How to make a beetle out of wood: multi-elemental stoichiometry of wood decay, xylophagy and fungivory.

    Science.gov (United States)

    Filipiak, Michał; Weiner, January

    2014-01-01

    The majority of terrestrial biomass is wood, but the elemental composition of its potential consumers, xylophages, differs hugely from that of wood. This causes a severe nutritional imbalance. We studied the stoichiometric relationships of 11 elements (C, N, P, K, Ca, Mg, Fe, Zn, Mn, Cu, Na) in three species of pine-xylem-feeding insects, Stictoleptura rubra, Arhopalus rusticus (Coleoptera, Cerambycidae) and Chalcophora mariana (Coleoptera, Buprestidae), to elucidate their mechanisms of tissue growth and to match their life histories to their dietary constraints. These beetles do not differ from other Coleoptera in their absolute elemental compositions, which are approximately 1000 (N), 100 (P, Cu) and 50 (K, Na) times higher than in dead but undecayed pine wood. This discrepancy diminishes along the wood decay gradient, but the elemental concentrations remain higher by an order of magnitude in beetles than in highly decayed wood. Numerical simulation of the life history of S. rubra shows that feeding on nutrient-poor undecayed wood would extend its development time to implausible values, whereas feeding on highly decomposed wood (heavily infected with fungi) would barely balance its nutritional budget during the long development period of this species. The changes in stoichiometry indicate that the relative change in the nutrient levels in decaying wood cannot be attributed solely to carbon loss resulting from decomposer respiration: the action of fungi substantially enriches the decaying wood with nutritional elements imported from the outside of the system, making it a suitable food for wood-eating invertebrates.

  15. Photodegradation of wood and depth profile analysis

    International Nuclear Information System (INIS)

    Kataoka, Y.

    2008-01-01

    Photochemical degradation is a key process of the weathering that occurs when wood is exposed outdoors. It is also a major cause of the discoloration of wood in indoor applications. The effects of sunlight on the chemical composition of wood are superficial in nature, but estimates of the depth at which photodegradation occurs in wood vary greatly from 80 microm to as much as 2540 mic rom. Better understanding of the photodegradation of wood through depth profile analysis is desirable because it would allow the development of more effective photo-protective treatments that target the surface layers of wood most susceptible to photodegradation. This paper briefly describes fundamental aspects of photodegradation of wood and reviews progress made in the field of depth profile study on the photodegradation of wood. (author)

  16. Robert Williams Wood: pioneer of invisible light.

    Science.gov (United States)

    Sharma, Shruti; Sharma, Amit

    2016-03-01

    The Wood's lamp aids in the diagnosis of multiple infectious, inflammatory and neoplastic dermatologic conditions. Although the Wood's lamp has many applications, which have improved both the diagnosis and management of disease, the man credited for its invention is relatively unknown in medicine. Robert Williams Wood, a prominent physicist of the early 20th century, is credited for the invention of the Wood's lamp. Wood was the father of infrared and ultraviolet photography and made significant contributions to other areas in optics and spectroscopy. Wood's work encompassed the formative years of American Physics; he published over 200 original papers over his lifetime. A few years after the invention of the Wood's lamp for ultraviolet photography, physicians in Europe adopted the Wood's lamp for dermatologic applications. Wood's lamp remains popular in clinics globally, given its ease of use and ability to improve diagnostic precision. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  17. Wood Specific Gravity Variations and Biomass of Central African Tree Species: The Simple Choice of the Outer Wood.

    Directory of Open Access Journals (Sweden)

    Jean-François Bastin

    Full Text Available Wood specific gravity is a key element in tropical forest ecology. It integrates many aspects of tree mechanical properties and functioning and is an important predictor of tree biomass. Wood specific gravity varies widely among and within species and also within individual trees. Notably, contrasted patterns of radial variation of wood specific gravity have been demonstrated and related to regeneration guilds (light demanding vs. shade-bearing. However, although being repeatedly invoked as a potential source of error when estimating the biomass of trees, both intraspecific and radial variations remain little studied. In this study we characterized detailed pith-to-bark wood specific gravity profiles among contrasted species prominently contributing to the biomass of the forest, i.e., the dominant species, and we quantified the consequences of such variations on the biomass.Radial profiles of wood density at 8% moisture content were compiled for 14 dominant species in the Democratic Republic of Congo, adapting a unique 3D X-ray scanning technique at very high spatial resolution on core samples. Mean wood density estimates were validated by water displacement measurements. Wood density profiles were converted to wood specific gravity and linear mixed models were used to decompose the radial variance. Potential errors in biomass estimation were assessed by comparing the biomass estimated from the wood specific gravity measured from pith-to-bark profiles, from global repositories, and from partial information (outer wood or inner wood.Wood specific gravity profiles from pith-to-bark presented positive, neutral and negative trends. Positive trends mainly characterized light-demanding species, increasing up to 1.8 g.cm-3 per meter for Piptadeniastrum africanum, and negative trends characterized shade-bearing species, decreasing up to 1 g.cm-3 per meter for Strombosia pustulata. The linear mixed model showed the greater part of wood specific gravity

  18. Wood Specific Gravity Variations and Biomass of Central African Tree Species: The Simple Choice of the Outer Wood.

    Science.gov (United States)

    Bastin, Jean-François; Fayolle, Adeline; Tarelkin, Yegor; Van den Bulcke, Jan; de Haulleville, Thales; Mortier, Frederic; Beeckman, Hans; Van Acker, Joris; Serckx, Adeline; Bogaert, Jan; De Cannière, Charles

    2015-01-01

    Wood specific gravity is a key element in tropical forest ecology. It integrates many aspects of tree mechanical properties and functioning and is an important predictor of tree biomass. Wood specific gravity varies widely among and within species and also within individual trees. Notably, contrasted patterns of radial variation of wood specific gravity have been demonstrated and related to regeneration guilds (light demanding vs. shade-bearing). However, although being repeatedly invoked as a potential source of error when estimating the biomass of trees, both intraspecific and radial variations remain little studied. In this study we characterized detailed pith-to-bark wood specific gravity profiles among contrasted species prominently contributing to the biomass of the forest, i.e., the dominant species, and we quantified the consequences of such variations on the biomass. Radial profiles of wood density at 8% moisture content were compiled for 14 dominant species in the Democratic Republic of Congo, adapting a unique 3D X-ray scanning technique at very high spatial resolution on core samples. Mean wood density estimates were validated by water displacement measurements. Wood density profiles were converted to wood specific gravity and linear mixed models were used to decompose the radial variance. Potential errors in biomass estimation were assessed by comparing the biomass estimated from the wood specific gravity measured from pith-to-bark profiles, from global repositories, and from partial information (outer wood or inner wood). Wood specific gravity profiles from pith-to-bark presented positive, neutral and negative trends. Positive trends mainly characterized light-demanding species, increasing up to 1.8 g.cm-3 per meter for Piptadeniastrum africanum, and negative trends characterized shade-bearing species, decreasing up to 1 g.cm-3 per meter for Strombosia pustulata. The linear mixed model showed the greater part of wood specific gravity variance was

  19. Preservation of forest wood chips

    Energy Technology Data Exchange (ETDEWEB)

    Kofman, P.D.; Thomsen, I.M.; Ohlsson, C.; Leer, E.; Ravn Schmidt, E.; Soerensen, M.; Knudsen, P.

    1999-01-01

    As part of the Danish Energy Research Programme on biomass utilisation for energy production (EFP), this project concerns problems connected to the handling and storing of wood chips. In this project, the possibility of preserving wood chips of the Norway Spruce (Picea Abies) is addressed, and the potential improvements by anaerobic storage are tested. Preservation of wood chips aims at reducing dry matter losses from extensive heating during storage and to reduce production of fungal spores. Fungal spores pose a health hazards to workers handling the chips. Further the producers of wood chips are interested in such a method since it would enable them to give a guarantee for the delivery of homogeneous wood chips also during the winter period. Three different types of wood chips were stored airtight and further one of these was stored in accordance with normal practise and use as reference. The results showed that airtight storage had a beneficial impact on the quality of the chips: no redistribution of moisture, low dry matter losses, unfavourable conditions for microbial activity of most fungi, and the promotion of yeasts instead of fungi with airborne spores. Likewise the firing tests showed that no combustion problems, and no increased risk to the environment or to the health of staff is caused by anaerobic storage of wood chips. In all, the tests of the anaerobic storage method of forest wood chips were a success and a large-scale test of the method will be carried out in 1999. (au)

  20. Wood pellets in a power plant - mixed combustion of coal and wood pellets

    International Nuclear Information System (INIS)

    Nupponen, M.

    2001-01-01

    The author reviews in his presentation the development of Turku Energia, the organization of the company, the key figures of the company in 2000, as well as the purchase of energy in 2000. He also presents the purchase of basic heat load, the energy production plants of the company, the sales of heat in 2000, the emissions of the plants, and the fuel consumption of the plants in 2000. The operating experiences of the plants are also presented. The experiences gained in Turku Energia on mixed combustion of coal and wood pellets show that the mixing ratios, used at the plants, have no effect on the burning properties of the boiler, and the use of wood pellets with coal reduce the SO 2 and NO x emissions slightly. Simultaneously the CO 2 share of the wood pellets is removed from the emissions calculations. Several positive effects were observed, including the disappearance of the coal smell of the bunker, positive publicity of the utilization of wood pellets, and the subsidies for utilization of indigenous fuels in power generation. The problems seen include the tendency of wood pellets to arc the silos, especially when the pellets include high quantities of dust, and the loading of the trucks and the pneumatic unloading of the trucks break the pellets. Additionally the wood pellets bounce on the conveyor so they drop easily from the conveyor, the screw conveyors designed for conveying grain are too weak and they get stuck easily, and static electricity is easily generated in the plastic pipe used as the discharge pipe for wood pellet (sparkling tendency). This disadvantage has been overcome by using metal net and grounding

  1. Continued growth expected for wood energy despite turbulence of the economic crisis : wood energy markets, 2008-2009

    Science.gov (United States)

    Rens Hartkamp; Bengt Hillring; Warren Mabee; Olle Olsson; Kenneth Skog; Henry Spelter; Johan Vinterback; Antje Wahl

    2009-01-01

    The economic crisis has not reduced the demand for wood energy, which is expected to continue to grow. The downturn in sawmill production caused a shortage of raw material supply for wood pellet producers. With decreased demand for pulpwood-quality roundwood for wood and paper products in 2009, some pulpwood is being converted into wood energy. Economies of scale are...

  2. Wood's lamp illumination (image)

    Science.gov (United States)

    A Wood's lamp emits ultraviolet light and can be a diagnostic aid in determining if someone has a fungal ... is an infection on the area where the Wood's lamp is illuminating, the area will fluoresce. Normally ...

  3. Robert Wood Johnson Foundation

    Science.gov (United States)

    Robert Wood Johnson Foundation Search How We Work Our Focus Areas About RWJF Search Menu How We Work Grants ... Learn more For Grantees and Grantseekers The Robert Wood Johnson Foundation funds a wide array of programs ...

  4. Advantages of the use of energy wood

    International Nuclear Information System (INIS)

    Kaerhae, K.; Aarnio, J.; Maekinen, P.

    2000-01-01

    According to the Regional Forestry Associations it would be possible to develop the harvesting of energy wood by increasing the use of it. The study was made at the areas of 34 regional forestry associations as an inquiry to the executive managers, as well as the persons responsible for timber trade, harvesting or regional affairs. The inquiries studied the use of energy wood and the user of them at the areas of the associations, as well as the amounts of harvesting and the realization of it. Only a third of the associations have large energy wood consuming plants (using more than 500 m 3 energy wood per year). The closest large energy wood consuming plant was in the average 31 km from the office of the association. The average energy wood use of the plant was 20 000 m 3 /a, the variation being 700 - 200 000 m 3 /a. The energy wood purchase range of the plants varied from few kilometers to hundred kilometers, the average being 47 km. Most of the energy wood was harvested from forest regeneration areas. Some of the energy wood is also harvested from young forest maintenance and thinning areas. The estimated harvesting of energy wood in 1999 was 6300 m 3 . A part of the energy wood is used for heating the farms and other small real estates, and a part is used for heating larger buildings like schools, hospitals, factories. The fees to the associations for purchase of energy wood varied significantly. The range was 2.00 - 11.00 FIM/m 3 . One association charged 300 FIM/parcel, and in one association the price depend on the amount of wood acquired from the lot, the unit price being 0.5 FIM/m 3 . It appeared that the associations estimated the use of energy wood to increase. The level in 1999 was 6300 m 3 and it is estimated to increase to 14 300 m 3 in 2005. The associations estimated that the levels can only be achieved if the stumpage price of energy wood may not be 0.0 FIM. Even a marginal price would lead to an increased harvesting of energy wood. The associations

  5. Inoculation Expedition of Agar wood

    International Nuclear Information System (INIS)

    Peng, C.S.; Mohd Fajri Osman; Rusli Zakaria

    2015-01-01

    Inoculation expedition of agar wood is a main field works for researcher in Nuclear Malaysia to prove the real inoculation of agar wood in real jungle. These expeditions was conducted fourth times in the jungles of Malaysia including Gunung Tebu in Terengganu, Murum in Belaga, Sarawak, Kampung Timbang in Kota Belud, Sabah and Nuclear Malaysia itself. This expedition starts from preparation of samples and equipment, transportation into the jungle, searching and recognition of agar wood and lastly, inoculation of the agar wood. Safety aspects precedence set out in the preparation and implementation of this expedition. (author)

  6. Characterisation of wood combustion ashes

    DEFF Research Database (Denmark)

    Maresca, Alberto

    The combustion of wood chips and wood pellets for the production of renewable energy in Denmark increased from 5.7 PJ to 16 PJ during the period 2000-2015, and further increases are expected to occur within the coming years. In 2012, about 22,300 tonnes of wood ashes were generated in Denmark....... Currently, these ashes are mainly landfilled, despite Danish legislation allowing their application onto forest and agricultural soils for fertilising and/or liming purposes. During this PhD work, 16 wood ash samples generated at ten different Danish combustion plants were collected and characterised...... for their composition and leaching properties. Despite the relatively large variations in the contents of nutrients and trace metals, the overall levels were comparable to typical ranges reported in the literature for other wood combustion ashes, as well as with regards to leaching. In general, the composition...

  7. P.E.I. wood fuel survey, 1990-91

    International Nuclear Information System (INIS)

    1991-04-01

    In 1991 a wood fuel survey of 450 randomly selected households, representing 1% of the total number of households in Prince Edward Island, was conducted. The survey indicated that 49.8% of the households burned wood, up from 42.1% of households in the 1988-1989 survey. The wood burning households consumed an average of 4.92 cords of wood, consistent with the 4.90 cords in the 1989 survey. The total residential wood consumption was estimated at ca 100,377 cords, an increase from the 89,000 cords used in 1988-89. Wood cutters represented 23.4% of respondents, with buyers representing 25.4% of respondents. The wood burning appliances used by the respondents were: airtight wood stove 39.9%, wood furnace 22.5%, kitchen wood stove 15.7%, combined wood/oil furnace 8.9%, Franklin/non-airtight 4.4%, Kemac unit 4.4%, fireplace insert 3.1%, and open fireplace 1%. The most frequent response among rural wood users cited price as an advantage of wood fuel, while the most frequent response of urban users cited the quality of the heat. 9 figs., 47 tabs

  8. Wood for the trees

    Directory of Open Access Journals (Sweden)

    Rob Garbutt

    2013-10-01

    Full Text Available Our paper focuses on the materiality, cultural history and cultural relations of selected artworks in the exhibition Wood for the trees (Lismore Regional Gallery, New South Wales, Australia, 10 June – 17 July 2011. The title of the exhibition, intentionally misreading the aphorism “Can’t see the wood for the trees”, by reading the wood for the resource rather than the collective wood[s], implies conservation, preservation, and the need for sustaining the originating resource. These ideas have particular resonance on the NSW far north coast, a region once rich in rainforest. While the Indigenous population had sustainable practices of forest and land management, the colonists deployed felling and harvesting in order to convert the value of the local, abundant rainforest trees into high-value timber. By the late twentieth century, however, a new wave of settlers launched a protest movements against the proposed logging of remnant rainforest at Terania Creek and elsewhere in the region. Wood for the trees, curated by Gallery Director Brett Adlington, plays on this dynamic relationship between wood, trees and people. We discuss the way selected artworks give expression to the themes or concepts of productive labour, nature and culture, conservation and sustainability, and memory. The artworks include Watjinbuy Marrawilil’s (1980 Carved ancestral figure ceremonial pole, Elizabeth Stops’ (2009/10 Explorations into colonisation, Hossein Valamanesh’s (2008 Memory stick, and AñA Wojak’s (2008 Unread book (in a forgotten language. Our art writing on the works, a practice informed by Bal (2002, Muecke (2008 and Papastergiadis (2004, becomes a conversation between the works and the themes or concepts. As a form of material excess of the most productive kind (Grosz, 2008, p. 7, art seeds a response to that which is in the air waiting to be said of the past, present and future.

  9. EFFECTS OF BURN RATE, WOOD SPECIES, MOISTURE CONTENT AND WEIGHT OF WOOD LOADED ON WOODSTOVE EMISSIONS

    Science.gov (United States)

    The report gives results of tests of four woodstove operating parameters (burn rate, wood moisture, wood load, and wood species) at two levels each using a half factorial experimental test design to determine statistically significant effects on the emission components CO, CO2, p...

  10. Detection of wood failure by image processing method: influence of algorithm, adhesive and wood species

    Science.gov (United States)

    Lanying Lin; Sheng He; Feng Fu; Xiping Wang

    2015-01-01

    Wood failure percentage (WFP) is an important index for evaluating the bond strength of plywood. Currently, the method used for detecting WFP is visual inspection, which lacks efficiency. In order to improve it, image processing methods are applied to wood failure detection. The present study used thresholding and K-means clustering algorithms in wood failure detection...

  11. Isolation and serological differentiation of a herpesvirus from bobwhite quail (Colinus virginianus, L. 1758).

    Science.gov (United States)

    Kaleta, E F; Marschall, H J; Glünder, G; Stiburek, B

    1980-01-01

    An infectious agent was isolated from the liver of bobwhite quails (Colinus virginianus, L. 1758). The agent was sensitive to chloroform and its multiplication was inhibited by 5-iodine-2-deoxy-uridine. It passed filters with a pore diameter of 220 nm and more but not 100 nm filters. Electron microscopic examination revealed numerous nucleocapsids with hollow capsomeres and few enveloped particles in the supernatant fluids of infected cultures. The nucleocapsids were calculated to have 162 capsomeres on their surface. Using the plaque reduction method for neutralization tests no serological cross reactions could be detected between the quail isolate and sera against Marek's disease virus, turkey herpes-virus (HV), duck enteritis HV, infectious laryngotracheitis HV, amazon parrot HV, great horned owl HV, eagle owl HV, snowy owl HV, falcon HV, pigeon HV, Lake Victoria Cormorant HV, and stork HV. The isolate from bobwhite quail did only cross-react with antiserum against crane HV. It is concluded that the isolated virus is a member of the avian herpesvirus group and it is proposed to tentatively term it herpesvirus colinum (from Colinus virginianus = bobwhite quail).

  12. Energy wood procurement in connection with conventional wood procurement; Energiapuun hankinnan organisointi muun puunhankinnan yhteydessae - PUUT02

    Energy Technology Data Exchange (ETDEWEB)

    Maekinen, P. [Finnish Forest Research Institute, Vantaa (Finland)

    2001-07-01

    The research consisted of two sub-projects. The present role of forestry associations in procurement of energy wood was investigated in the first sub- project. The possibilities and willingness of them to increase the energy wood procurement were also studied. The role of forest machine and forestry service entrepreneurs in procurement of energy wood was investigated in the second sub-project. The effects of energy wood procurement on the operation of the forest machine companies in general were also studied in this sub-project. The sub-project three studied the requirements of the customer companies for the energy wood suppliers. All the material of the sub-projects was collected by personal inquiries. According to the executive directors of the forestry associations the role of the forestry associations in energy wood procurement varied between a by-stander and active participant. Active forestry associations announced the companies for stands available for cutting. They told also that they directed the harvesting to correct sites and deliver stems at the roadside. The role of the forestry association was emphasised especially when the associations on the basis of a letter of attorney carried out the timber trade. It was estimated that in the near future the operation of forest machine entrepreneurs in harvesting of energy wood would increase significantly. From the employment and turnover point of view the role of harvesting of energy wood was not seen as a significant matter. On the other hand, that harvesting of energy wood impede the harvesting of commercial timber was seen as a more significant matter. In the future the end-users of energy wood would like to have more competition in the energy wood markets. However, the energy wood suppliers were desired to be relative large so that the reliability of deliveries could be ensured. Simultaneously as the end-users wanted to decrease the price of forest chips, the machine entrepreneurs estimated the price to

  13. Organochlorine contaminants in cormorant, darter, egret, and ibis eggs from South Africa.

    Science.gov (United States)

    Bouwman, Henk; Polder, Anuschka; Venter, Belinda; Skaare, Janneche U

    2008-03-01

    During the last 15 years, no research has been published on the levels of pesticides in bird eggs from South Africa, despite the high levels found previously. We analysed eggs from African darter, cattle egret, reed cormorant, African sacred ibis, as well as single eggs from some other species, and found HCB, DDTs, HCHs, chlordanes and PCBs at detectable levels. The presence of mirex in all species was unexpected, since this compound was never registered in South Africa. It also seemed as if terrestrial feeding birds had higher DDE:PCB ratios when compared with aquatic feeding birds. Except for chlordane, the African darter eggs had the highest levels of all other compounds (mean 370 and 300 ng g(-1) ww Sigma pesticides and Sigma PCBs, respectively). Multivariate analysis clearly distinguished the aquatic and terrestrially feeding birds on pollution profile. The African darter (aquatic feeding) and the cattle egret (terrestrial feeding) would be good indicator candidates. Eggshell thinning was detected in the African darter, and was associated with most of the compounds, including DDE and PCBs. We raise a concern that generally longer living birds in warmer climates, laying fewer eggs per clutch, might be at increased risk when compared with trophically similar birds exposed to equivalent levels of pollution in colder climates. Given the scarcity of water and the high biodiversity in Southern Africa, climate change will exert strong pressure, and any additional anthropogenic contamination at levels that can cause subtle behavioural, developmental and reproductive changes, can have serious effects.

  14. Strength loss in decayed wood

    Science.gov (United States)

    Rebecca E. Ibach; Patricia K. Lebow

    2014-01-01

    Wood is a durable engineering material when used in an appropriate manner, but it is susceptible to biological decay when a log, sawn product, or final product is not stored, handled, or designed properly. Even before the biological decay of wood becomes visually apparent, the decay can cause the wood to become structurally unsound. The progression of decay to that...

  15. Wood thermoplastic composites

    Science.gov (United States)

    Daniel F. Caulfield; Craig Clemons; Rodney E. Jacobson; Roger M. Rowell

    2005-01-01

    The term “wood-plastic composites” refers to any number of composites that contain wood (of any form) and either thermoset or thermoplastic polymers. Thermosets or thermoset polymers are plastics that, once cured, cannot be remelted by heating. These include cured resins, such as epoxies and phenolics, plastics with which the forest products industry is most familiar (...

  16. Effect of Alternative Wood Species and First Thinning Wood on Oriented Strand Board Performance

    Directory of Open Access Journals (Sweden)

    Fabiane Salles Ferro

    2018-01-01

    Full Text Available This study aimed to evaluate the feasibility of using and influence of alternative wood species such as Cambará, Paricá, Pinus, and wood from first thinning operations on oriented strand board (OSB physical and mechanical properties. Besides that, an alternative resin, castor oil-based polyurethane, was used to bond the particles, due to the better environmental performance when compared to other resins commonly used worldwide in OSB production. Physical properties such as the moisture content, thickness swelling, and water absorption, both after 2 and 24 hours of water immersion, and mechanical properties such as the modulus of elasticity and resistance in static bending, in major and minor axes, and internal bonding were investigated. All tests were performed according to European code EN 300:2006. Results showed the influence of wood species on physical and mechanical properties. Panels made with higher density woods such as Cambará presented better physical performance, while those made with lower density woods such as Pinus presented better mechanical properties. Besides that, strand particle geometry was also influenced on all physical and mechanical properties investigated. Therefore, the feasibility of using alternative species and wood from first thinning and with castor oil-based polyurethane resin in OSB production was verified.

  17. The environmental assessment of the wood combustion

    International Nuclear Information System (INIS)

    Dinca, Cristian; Badea, Adrian; Apostol, Tiberiu

    2007-01-01

    In this paper, the authors analysed the emissions from residential boilers burning wood logs, bark pellets, wood briquettes and wood pellets. Three boilers, selected with respect to age, design, connection to heat storage tank, and type of biofuel, were included in the study. The emissions captured comprised carbon monoxide (CO), carbon dioxide (CO 2 ), oxygen (O 2 ), total organic carbons (TOC), nitrogen oxides (NO x ), polycyclic aromatic hydrocarbons (PAC) and 33 volatile organic compounds (VOC). We have used the Life Cycle Inventory method in order to identify the main stressors generated by the wood combustion stage. In this purpose, we have analysed one type of old boiler, one type of modern boiler and a multi-fuel boiler, which can burn wood logs, bark pellets, wood briquettes and wood pellets. In this article, we selected only the wood combustion stage because it is the most important according to the emissions produced. (authors)

  18. Wood-energy - The sector get worried

    International Nuclear Information System (INIS)

    Mary, Olivier; Signoret, Stephane; Bohlinger, Philippe; Guilhem, Jean; De Santis, Audrey; Sredojevic, Alexandre; Defaye, Serge; Maindrault, Marc

    2017-01-01

    Wood energy is, today and certainly also tomorrow, one of the most important renewable energies in France. However, the wood-energy sector seems to slow down as hydrocarbon prices stay extremely low. This document presents 8 articles, describing the context and the characteristics of this evolution, plus some examples of developments in France. The themes of the articles are: the activity of the wood-energy sector should be reinforced to meet the objectives of the French energy multi-year plan; The 2035 prospective of the wood yield in the French forest will meet the future demand, however this evaluation does not take into consideration the effects of the climatic change; the conversion to biomass of the 'Fort de l'Est' (near Paris) heating system (equipped with a boiling fluidized bed boiler) has enabled the heat network to beat the 50 pc share of renewable energy; wood-energy professionals use the 'quality' lever to challenge their fossil fuel competitors; the city of Orleans is now equipped with an innovative biomass cogeneration plant; the example of wood waste valorization in a French sawmill; the French ONF (Forest Administration) Wood-Energy actor has just inaugurated its largest biomass dryer, in order to develop the domestic market for wood as a fuel; analysis of the technical and economical feasibility of using wood to generate electric power or replacing electric space heating by heat network

  19. Coal and wood fuel for electricity production: An environmentally sound solution for waste and demolition wood

    Energy Technology Data Exchange (ETDEWEB)

    Penninks, F.W.M. [EPON, Zwolle (Netherlands)

    1997-12-31

    Waste wood from primary wood processing and demolition presents both a problem and a potential. If disposed in landfills, it consumes large volumes and decays, producing CH{sub 4}, CO{sub 2} and other greenhouse gases. As an energy source used in a coal fired power plant it reduces the consumption of fossil fuels reducing the greenhouse effect significantly. Additional advantages are a reduction of the ash volume and the SO{sub 2} and NO{sub x} emissions. The waste wood requires collection, storage, processing and burning. This paper describes a unique project which is carried out in the Netherlands at EPON`s Gelderland Power Plant (635 MW{sub e}) where 60 000 tonnes of waste and demolition wood will be used annually. Special emphasis is given to the processing of the powdered wood fuel. Therefore, most waste and demolition wood can be converted from an environmental liability to an environmental and economic asset. (author)

  20. Coal and wood fuel for electricity production: An environmentally sound solution for waste and demolition wood

    Energy Technology Data Exchange (ETDEWEB)

    Penninks, F W.M. [EPON, Zwolle (Netherlands)

    1998-12-31

    Waste wood from primary wood processing and demolition presents both a problem and a potential. If disposed in landfills, it consumes large volumes and decays, producing CH{sub 4}, CO{sub 2} and other greenhouse gases. As an energy source used in a coal fired power plant it reduces the consumption of fossil fuels reducing the greenhouse effect significantly. Additional advantages are a reduction of the ash volume and the SO{sub 2} and NO{sub x} emissions. The waste wood requires collection, storage, processing and burning. This paper describes a unique project which is carried out in the Netherlands at EPON`s Gelderland Power Plant (635 MW{sub e}) where 60 000 tonnes of waste and demolition wood will be used annually. Special emphasis is given to the processing of the powdered wood fuel. Therefore, most waste and demolition wood can be converted from an environmental liability to an environmental and economic asset. (author)

  1. Mineralogy of Non-Silicified Fossil Wood

    Directory of Open Access Journals (Sweden)

    George E. Mustoe

    2018-03-01

    Full Text Available The best-known and most-studied petrified wood specimens are those that are mineralized with polymorphs of silica: opal-A, opal-C, chalcedony, and quartz. Less familiar are fossil woods preserved with non-silica minerals. This report reviews discoveries of woods mineralized with calcium carbonate, calcium phosphate, various iron and copper minerals, manganese oxide, fluorite, barite, natrolite, and smectite clay. Regardless of composition, the processes of mineralization involve the same factors: availability of dissolved elements, pH, Eh, and burial temperature. Permeability of the wood and anatomical features also plays important roles in determining mineralization. When precipitation occurs in several episodes, fossil wood may have complex mineralogy.

  2. Recycling of wood products. Final report of the preliminary study project partly financed by the Finnish Wood Research Oy; Puutuotteiden kierraetys. Finnish Wood Research Oy:n osarahoittaman esiselvityshankkeen loppuraportti

    Energy Technology Data Exchange (ETDEWEB)

    Pirhonen, I.; Heraejaervi, H.; Saukkola, P.; Raety, T.; Verkasalo, E., Email: henrik.herajarvi@metla.fi

    2011-07-01

    The objective of this preliminary study was to clarify the present state of recycling of wood in Finland and Europe. In the work the control measures of recycling were examined. In Finland there will be a total amount of 850 000 tons of waste wood per year. Of this amount 670 000 tons is from construction and demolishing of buildings. Burning the wood to energy is technically and economically the most reasonable use of waste wood in Finland and in several other European countries where there is a long heating season. A lot of work has been done to find new ways of utilization. The objective of the European Union to increase the use of renewable natural resources in the energy production creates an additional demand to all kinds of wood, including waste wood. The waste legislation of Finland and EU is directing to recycling, not restricting it. Furthermore, the systems to try to create markets for products containing recycled materials are under development. In the future it is expected that the legislation is tightening and the burning of waste wood is no longer calculated as acceptable recycling. Other ways to utilize wood waste should then already be developed. Furthermore, the development and introduction of new recycling methods are of important significance also when marketing wood and wood products. The recycling should be taken into consideration already at the planning stage of the building

  3. Surface characterization of weathered wood-plastic composites produced from modified wood flour

    Science.gov (United States)

    James S. Fabiyi; Armando G. McDonald; Nicole M. Stark

    2007-01-01

    The effects of weathering on the surface properties of wood-plastic composites (WPC) were examined. High-density polyethylene (HDPE) based WPCs made from modified wood flour (untreated, extractives free, and holocellulose (delignified) fibers) were subjected to accelerated (xenon-arc) weathering. Colorimetry and Fourier-transform infrared spectroscopy were employed to...

  4. Discover the benefits of residential wood heating

    International Nuclear Information System (INIS)

    2003-01-01

    This publication described how residential wood-heating systems are being used to reduce energy costs and increase home comfort. Biomass energy refers to all forms are renewable energy that is derived from plant materials. The source of fuel may include sawmills, woodworking shops, forest operations and farms. The combustion of biomass is also considered to be carbon dioxide neutral, and is not considered to be a major producer of greenhouse gases (GHG) linked to global climate change. Wood burning does, however, release air pollutants, particularly if they are incompletely burned. Incomplete combustion of wood results in dense smoke consisting of toxic gases. Natural Resources Canada helped create new safety standards and the development of the Wood Energy Technical Training Program to ensure that all types of wood-burning appliances are installed correctly and safely to reduce the risk of fire and for effective wood heating. In Canada, more than 3 million families heat with wood as a primary or secondary heating source in homes and cottages. Wood heating offers security from energy price fluctuations and electrical power failures. This paper described the benefits of fireplace inserts that can transform old fireplaces into modern heating systems. It also demonstrated how an add-on wood furnace can be installed next to oil furnaces to convert an oil-only heating system to a wood-oil combination system, thereby saving thousands of dollars in heating costs. Wood pellet stoves are another wood burning option. The fuel for the stoves is produced from dried, finely ground wood waste that is compressed into hard pellets that are loaded into a hopper. The stove can run automatically for up to 24 hours. New high-efficiency advanced fireplaces also offer an alternative heating system that can reduce heating costs while preserving Canada's limited supply of fossil fuels such as oil and gas. 13 figs

  5. Quantifying arthropod contributions to wood decay

    Science.gov (United States)

    Michael Ulyshen; Terry Wagner

    2013-01-01

    Termites carry large amounts of soil into dead wood, and this behaviour complicates efforts to measure their contributions to wood decay. A novel method for isolating termite soil by burning the wood is described, and some preliminary results are presented.

  6. Chapter 6: Above Ground Deterioration of Wood and Wood-Based Materials

    Science.gov (United States)

    Grant Kirker; Jerrold Winandy

    2014-01-01

    Wood as a material has unique properties that make it ideal for above ground exposure in a wide range of structural and non-strucutral applications. However, no material is without limitations. Wood is a bio-polymer which is subject to degradative processes, both abiotic and biotic. This chapter is a general summary of the abiotic and biotic factors that impact service...

  7. X-ray initiated polymerization of wood impregnants

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, Marshall R.; Galloway, Richard A. [IBA Industrial, Inc., Edgewood, NY (United States); Berejka, Anthony J. [Ionicorp, Huntington, NY 11743 (United States)], E-mail: berejka@msn.com; Montoney, Daniel [Strathmore Products, Syracuse, NY (United States); Driscoll, Mark; Smith, Leonard; Scott Larsen, L. [State University of New York, SUNY-ESF, Syracuse, NY (United States)

    2009-07-15

    X-rays, derived from a high energy, high-current electron beam (EB), initiated in-situ polymerization of a unique class of monomers that were found to penetrate the cell walls of wood. X-rays initiated an auto-catalytic acrylic polymerization and penetrated through thick pieces of wood. The final cured product having the polymerizate, a polymer, both in the wood cell lumens and in the cell walls is called wood impregnated with a wood-polymer penetrant (WPP). The controlled lower dose rate of X-rays overcame disproportionation encountered when using higher dose-rate electron beam initiation. With X-rays, the in-situ polymerization took place in one exposure of modest dose. With EB, multiple passes were needed to avoid excessive heat build-up and monomer volatilization. Having entered the cell walls of the wood and then being polymerized within the cell walls, these radiation-cured unique monomers imparted outstanding dimensional stability upon exposure of the impregnated wood to humidity cycling. The preferred monomer system was also chemically modified prior to impregnation with agents that would remain in the wood and prevent the growth of fungi and other microbials. This technique differs from historic uses of monomers that merely filled the lumens of the wood (historic wood-polymer composites), which are only suitable for indoor use. The WPP impregnated wood that was either X-ray cured or EB cured demonstrated enhanced structural properties, dimensional stability, and decay resistance.

  8. X-ray initiated polymerization of wood impregnants

    International Nuclear Information System (INIS)

    Cleland, Marshall R.; Galloway, Richard A.; Berejka, Anthony J.; Montoney, Daniel; Driscoll, Mark; Smith, Leonard; Scott Larsen, L.

    2009-01-01

    X-rays, derived from a high energy, high-current electron beam (EB), initiated in-situ polymerization of a unique class of monomers that were found to penetrate the cell walls of wood. X-rays initiated an auto-catalytic acrylic polymerization and penetrated through thick pieces of wood. The final cured product having the polymerizate, a polymer, both in the wood cell lumens and in the cell walls is called wood impregnated with a wood-polymer penetrant (WPP). The controlled lower dose rate of X-rays overcame disproportionation encountered when using higher dose-rate electron beam initiation. With X-rays, the in-situ polymerization took place in one exposure of modest dose. With EB, multiple passes were needed to avoid excessive heat build-up and monomer volatilization. Having entered the cell walls of the wood and then being polymerized within the cell walls, these radiation-cured unique monomers imparted outstanding dimensional stability upon exposure of the impregnated wood to humidity cycling. The preferred monomer system was also chemically modified prior to impregnation with agents that would remain in the wood and prevent the growth of fungi and other microbials. This technique differs from historic uses of monomers that merely filled the lumens of the wood (historic wood-polymer composites), which are only suitable for indoor use. The WPP impregnated wood that was either X-ray cured or EB cured demonstrated enhanced structural properties, dimensional stability, and decay resistance.

  9. On Erdos–Wood's conjecture

    Indian Academy of Sciences (India)

    In this article, we prove that infinite number of integers satsify Erdős–Woods conjecture. Moreover, it follows that the number of natural numbers ≤ satisfies Erdős–Woods conjecture with = 2 is at least /(log ) for some positive constant > 2.

  10. Isolation and characterization of novel polymorphic microsatellite markers for the white stork, Ciconia ciconia: applications in individual–based and population genetics

    Energy Technology Data Exchange (ETDEWEB)

    Feldman Turjeman, S.; Centeno-Cuadros, A.; Nathan, R.

    2016-07-01

    The white stork, Ciconia ciconia, is a model species for studies of bird migration and behavior, but previously published genetic markers are not informative enough to perform individual–based genetic studies. Following discovery using next generation sequencing, 11 polymorphic markers were selected and tested in samples from two study sites. The number of alleles per locus ranged from 2–10 with an average of 5.3. The mean observed and expected heterozygosities were 0.519 and 0.565 respectively. PID was adequately sensitive for population– and individual–based genetics studies. There was no significant evidence of allelic drop–out, null alleles, or other errors; one sample site deviated from Hardy–Weinberg equilibrium for two loci, but no loci deviated in both samples, suggesting utility of these markers. These markers can be used to answer a range of ecological questions including those related to genetic diversity, degree of natal philopatry, and genetic mating strategies. (Author)

  11. Isolation and characterization of novel polymorphic microsatellite markers for the white stork, Ciconia ciconia : applications in individual–based and population genetics

    Directory of Open Access Journals (Sweden)

    Feldman Turjeman, S.

    2016-02-01

    Full Text Available The white stork, Ciconia ciconia, is a model species for studies of bird migration and behavior, but previously published genetic markers are not informative enough to perform individual–based genetic studies. Following discovery using next generation sequencing, 11 polymorphic markers were selected and tested in samples from two study sites. The number of alleles per locus ranged from 2–10 with an average of 5.3. The mean observed and expected heterozygosities were 0.519 and 0.565 respectively. PID was adequately sensitive for population– and individual–based genetics studies. There was no significant evidence of allelic drop–out, null alleles, or other errors; one sample site deviated from Hardy–Weinberg equilibrium for two loci, but no loci deviated in both samples, suggesting utility of these markers. These markers can be used to answer a range of ecological questions including those related to genetic diversity, degree of natal philopatry, and genetic mating strategies.

  12. The economic potential of wood pellet production from alternative, low-value wood sources in the southeast of the US

    NARCIS (Netherlands)

    Hoefnagels, Ric; Junginger, Martin; Faaij, Andre

    2014-01-01

    The global demand for wood pellets used for energy purposes is growing. Therefore, increased amounts of wood pellets are produced from primary forestry products, such as pulp wood. The present analysis demonstrates that substantial amounts of alternative, low-value wood resources are available that

  13. Users guide for WoodCite, a product cost quotation tool for wood component manufacturers [computer program

    Science.gov (United States)

    Jeff Palmer; Adrienn Andersch; Jan Wiedenbeck; Urs. Buehlmann

    2014-01-01

    WoodCite is a Microsoft® Access-based application that allows wood component manufacturers to develop product price quotations for their current and potential customers. The application was developed by the U.S. Forest Service and Virginia Polytechnic Institute and State University, in cooperation with the Wood Components Manufacturers Association.

  14. Wood energy x 2 - Scenario for the development of wood energy use in Switzerland

    International Nuclear Information System (INIS)

    2004-01-01

    This study for the Swiss Agency for the Environment, Forests and Landscapes (SAEFL) and the Swiss wood-energy association (Holzenergie Schweiz) presents the results of a scenario-study that examined if, and under what conditions, doubling the use of wood energy in Switzerland could help reach carbon dioxide reduction targets. Two scenarios are presented that are based on high and low rates of growth for the number of automatic wood-chipping or pellets-fired installations. For both scenarios, figures are presented on the amount of wood used and the heating energy generated. The political and financial prerequisites for the scenarios are discussed and other boundary conditions are defined. The report draws conclusions from the study of the two scenarios and summarises the political action deemed necessary

  15. Implementation of new technologies in wood industry and their effect in wood products quality

    OpenAIRE

    ELVA ÇAUSHI; PANDELI MARKU

    2014-01-01

    There are about 300 companies producing furniture and about 250 small and medium enterprises (SME) producing sawn timber, which operate in the field of wood industry in Albania. This wood industry production is being challenged by the increasing demand in the domestic market, ranging from kitchen furniture to office and schools furniture, bedroom furniture, doors, windows, and saw timber in different dimensions. The production from the wood industry can fulfill about 80% of the domestic mark...

  16. Refraction and absorption of microwaves in wood

    International Nuclear Information System (INIS)

    Ziherl, Saša; Bajc, Jurij; Čepič, Mojca

    2013-01-01

    A demonstration experiment for physics students showing the dependence of the refractive index and absorption coefficient of wood on the direction of microwaves is presented. Wood and microwaves enable study of anisotropic properties, which are typically found in crystals. Wood is used as the persuasive representative of uniaxial anisotropic materials due to its visible structure and its consequent anisotropic properties. Wood can be cut in a general direction and wooden plates a few centimetres thick with well-defined fibre orientation are easily prepared. Microwaves are used because wood is transparent for microwaves and their centimetre-scale wavelength is comparable to the wood structure. (paper)

  17. Wood for fuel

    Energy Technology Data Exchange (ETDEWEB)

    Beaton, D

    1986-01-01

    Growing wood for energy could contribute three million tonnes of coal equivalent per year by the end of the century. Research programmes in the UK involved with energy forestry are reported. Three systems of wood energy, modified conventional forestry, single stem timber cropping and short rotation coppicing are being investigated. The short rotation coppicing requires inputs similar to those of agricultural crops and the machinery geared towards agricultural operations is compatible with it. Single stem forestry has a medium rotation period of 20 years. The production of coppice wood fuels is discussed in further detail for different parts of the UK with recommendations for species selection and adaption of existing farming practices. A coppice willow harvester has been developed for harvesting during November - February. Weed control and fertilizer application are also briefly mentioned.

  18. The Swedish wood fuel market

    International Nuclear Information System (INIS)

    Hillring, Bengt

    1999-01-01

    In Sweden, wood fuels are traditionally used in the Swedish forest products industry and for heating of single-family houses. More recently they are also become established as an energy source for district heating and electricity production. Energy policy, especially the energy taxation system, has favoured wood fuels and other biofuels, mainly for environmental reasons. There is now an established commercial market for wood fuels in the district heating sector, which amounts to 45 PJ and is growing 20 per cent annually. Price levels have been stable in current prices for a decade, mainly because of good access to wood fuels. Price levels are dominated by production costs on a market that is largely governed by the buyer. It is expected that the use of wood fuels will increased in Sweden in the future, which will push a further development of this section on the market and bring about technological changes in the area. (Author)

  19. Fatigue Damage in Wood

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben

    1996-01-01

    An investigation of fatigue failure in wood subjected to load cycles in compression parallel to grain is presented. Fatigue failure is found to depend both on the total time under load and on the number of cycles.Recent accelerated fatigue research on wood is reviewed, and a discrepancy between...... to 10 Hz are used. The number of cycles to failure is found to be a poor measure of the fatigue performance of wood. Creep, maximum strain, stiffness and work are monitored throughout the fatigue tests. Accumulated creep is suggested identified with damage and a correlation between stiffness reduction...

  20. Wood and Sediment Dynamics in River Corridors

    Science.gov (United States)

    Wohl, E.; Scott, D.

    2015-12-01

    Large wood along rivers influences entrainment, transport, and storage of mineral sediment and particulate organic matter. We review how wood alters sediment dynamics and explore patterns among volumes of instream wood, sediment storage, and residual pools for dispersed pieces of wood, logjams, and beaver dams. We hypothesized that: volume of sediment per unit area of channel stored in association with wood is inversely proportional to drainage area; the form of sediment storage changes downstream; sediment storage correlates most strongly with wood load; and volume of sediment stored behind beaver dams correlates with pond area. Lack of data from larger drainage areas limits tests of these hypotheses, but analyses suggest a negative correlation between sediment volume and drainage area and a positive correlation between wood and sediment volume. The form of sediment storage in relation to wood changes downstream, with wedges of sediment upstream from jammed steps most prevalent in small, steep channels and more dispersed sediment storage in lower gradient channels. Use of a published relation between sediment volume, channel width, and gradient predicted about half of the variation in sediment stored upstream from jammed steps. Sediment volume correlates well with beaver pond area. Historically more abundant instream wood and beaver populations likely equated to greater sediment storage within river corridors. This review of the existing literature on wood and sediment dynamics highlights the lack of studies on larger rivers.

  1. Management alternatives of energy wood thinning stands

    International Nuclear Information System (INIS)

    Heikkilae, Jani; Siren, Matti; Aeijaelae, Olli

    2007-01-01

    Energy wood thinning has become a feasible treatment alternative of young stands in Finland. Energy wood thinnings have been carried out mainly in stands where precommercial thinning has been neglected and the harvesting conditions for industrial wood thinning are difficult. Despite of its positive effects on harvesting costs and on renewable energy potential, whole-tree harvesting has been constantly criticized for causing growth loss. In this paper, the profitability of energy wood thinning was studied in 20 Scots pine-dominated stands where energy wood thinning was carried out. The growth of the stands after thinning was predicted with the help of Motti-stand simulator. Entire rotation time of the stands was simulated with different management alternatives. The intensity of first thinning and recovery level of logging residues varied between alternatives. In order to attain acceptable harvesting conditions, industrial wood thinning had to be delayed. The effect of energy wood thinning on subsequent stem wood growth was almost the same as in conventional thinning. Whole-tree harvesting for energy proved to be profitable alternative if the stumpage price is around 3EUR m -3 , the interest rate is 3% or 5% and the removal of pulpwood is less than 20 m 3 ha -1 . If the harvestable pulpwood yield is over 20 m 3 ha -1 , integrated harvesting of industrial and energy wood or delayed industrial wood harvesting becomes more profitable. (author)

  2. Impregnating Systems for Producing Wood-Plastic Composite Materials and Resinified Woods by Radiochemical Means

    International Nuclear Information System (INIS)

    Laizier, J.; Laroche, R.; Marchand, J.

    1969-01-01

    The effect of the nature of the components in the impregnation mixture on the characteristics of wood-plastic combinations has been studied in the case of beech by applying a wide variety of compositions. In particular, the effect of water (in the impregnator, and in the form of moisture in the wood) on the characteristics of the products obtained has been determined. It has been shown that, in place of the conventional method for preparing resinified woods (using a ternary monomer-solvent-water mixture), it is possible to use a method involving comonomers, which obviate the need to dry the wood after treatment. The evaluation of the results obtained is based on the value of the impregnation rate and on the modifications in microscopic structure; these emphasize the differences between the types of filler and enable comparisons to be drawn with the dimensional stabilities observed. Measurements of variations in dimensions and the recurrence of moisture have made it possible to establish a classification based on the types of monomer used and the operating conditions. It is shown that a whole range of products is obtained, the properties of which differ widely and are comparatively easily adaptable to the purpose specified. These properties illustrate clearly the differences and characteristics of resinified woods as opposed to conventional wood-plastic materials. (author) [fr

  3. NorWood: a gene expression resource for evo-devo studies of conifer wood development.

    Science.gov (United States)

    Jokipii-Lukkari, Soile; Sundell, David; Nilsson, Ove; Hvidsten, Torgeir R; Street, Nathaniel R; Tuominen, Hannele

    2017-10-01

    The secondary xylem of conifers is composed mainly of tracheids that differ anatomically and chemically from angiosperm xylem cells. There is currently no high-spatial-resolution data available profiling gene expression during wood formation for any coniferous species, which limits insight into tracheid development. RNA-sequencing data from replicated, high-spatial-resolution section series throughout the cambial and woody tissues of Picea abies were used to generate the NorWood.conGenIE.org web resource, which facilitates exploration of the associated gene expression profiles and co-expression networks. Integration within PlantGenIE.org enabled a comparative regulomics analysis, revealing divergent co-expression networks between P. abies and the two angiosperm species Arabidopsis thaliana and Populus tremula for the secondary cell wall (SCW) master regulator NAC Class IIB transcription factors. The SCW cellulose synthase genes (CesAs) were located in the neighbourhoods of the NAC factors in A. thaliana and P. tremula, but not in P. abies. The NorWood co-expression network enabled identification of potential SCW CesA regulators in P. abies. The NorWood web resource represents a powerful community tool for generating evo-devo insights into the divergence of wood formation between angiosperms and gymnosperms and for advancing understanding of the regulation of wood development in P. abies. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

  4. Manufacturing methods and magnetic characteristics of magnetic wood

    International Nuclear Information System (INIS)

    Oka, H.; Hojo, A.; Osada, H.; Namizaki, Y.; Taniuchi, H.

    2004-01-01

    The relationship between wood construction and DC magnetic characteristics for three types of magnetic wood was experimentally investigated. The results show that the magnetic characteristics of each type of magnetic wood are dependent on the magnetic materials, the density of the magnetic material and the construction of the wood. Furthermore, it was determined that the relationship between the fiber direction and the magnetic path direction of the magnetic wood influenced the wood's magnetic characteristics

  5. Assessment and management of dead-wood habitat

    Science.gov (United States)

    Hagar, Joan

    2007-01-01

    The Bureau of Land Management (BLM) is in the process of revising its resource management plans for six districts in western and southern Oregon as the result of the settlement of a lawsuit brought by the American Forest Resource Council. A range of management alternatives is being considered and evaluated including at least one that will minimize reserves on O&C lands. In order to develop the bases for evaluating management alternatives, the agency needs to derive a reasonable range of objectives for key issues and resources. Dead-wood habitat for wildlife has been identified as a key resource for which decision-making tools and techniques need to be refined and clarified. Under the Northwest Forest Plan, reserves were to play an important role in providing habitat for species associated with dead wood (U.S. Department of Agriculture Forest Service and U.S. Department of the Interior Bureau of Land Management, 1994). Thus, the BLM needs to: 1) address the question of how dead wood will be provided if reserves are not included as a management strategy in the revised Resource Management Plan, and 2) be able to evaluate the effects of alternative land management approaches. Dead wood has become an increasingly important conservation issue in managed forests, as awareness of its function in providing wildlife habitat and in basic ecological processes has dramatically increased over the last several decades (Laudenslayer et al., 2002). A major concern of forest managers is providing dead wood habitat for terrestrial wildlife. Wildlife in Pacific Northwest forests have evolved with disturbances that create large amounts of dead wood; so, it is not surprising that many species are closely associated with standing (snags) or down, dead wood. In general, the occurrence or abundance of one-quarter to one-third of forest-dwelling vertebrate wildlife species, is strongly associated with availability of suitable dead-wood habitat (Bunnell et al., 1999; Rose et al., 2001). In

  6. Radiation processing of wood-plastic composites

    International Nuclear Information System (INIS)

    Czvikovszky, T.

    1992-01-01

    There are three main types of radiation-processed composite material derived from plastics and fibrous natural polymers. The first are the monomer-impregnated, radiation-treated wood-plastic composites (WPC). They became a commercial success in the early 1970s. More recently, work has focused on improving the WPCs by creating in them interpenetrating network (IPN) systems by the use of appropriate multifunctional oligomers and monomers. The main kinetic features of radiation-initiated chain polymerization remain applicable even in impregnated wood. The second type are the plastics filled or reinforced with dispersed wood fiber or other cellulosics (WFRP). In their case, radiation processing offers a new opportunity to apply radiation-reactive adhesion promoters between wood or cellulosic fibers and the thermoplastic matrices. The third type are the laminar composites made by electron beam coating of wood-based agglomerate sheets and boards. This chapter reviews the industrial applications and the radiation processing of the three types of the wood-plastic composites and indicates future trends. (orig.)

  7. Long term durability of wood-plastic composites made with chemically modified wood

    Science.gov (United States)

    Rebecca E. Ibach; Craig M. Clemons

    2017-01-01

    Wood-plastic composites (WPCs) have slower moisture sorption than solid wood, but over time moisture can impact the strength, stiffness, and decay of the composite. These changes will become increasingly important if WPCs are used in more challenging environments such as in ground-contact applications. There are several options for mitigating the moisture sorption of...

  8. Simulated long-term effects of varying tree retention on wood production, dead wood and carbon stock changes.

    Science.gov (United States)

    Santaniello, Francesca; Djupström, Line B; Ranius, Thomas; Weslien, Jan; Rudolphi, Jörgen; Sonesson, Johan

    2017-10-01

    Boreal forests are an important source of timber and pulp wood, but provide also other products and services. Utilizing a simulation program and field data from a tree retention experiment in a Scots pine forest in central Sweden, we simulated the consequences during the following 100 years of various levels of retention on production of merchantable wood, dead wood input (as a proxy for biodiversity), and carbon stock changes. At the stand level, wood production decreased with increased retention levels, while dead wood input and carbon stock increased. We also compared 12 scenarios representing a land sharing/land sparing gradient. In each scenario, a constant volume of wood was harvested with a specific level of retention in a 100-ha landscape. The area not needed to reach the defined volume was set-aside during a 100-year rotation period, leading to decreasing area of set-asides with increasing level of retention across the 12 scenarios. Dead wood input was positively affected by the level of tree retention whereas the average carbon stock decreased slightly with increasing level of tree retention. The scenarios will probably vary in how they favor species preferring different substrates. Therefore, we conclude that a larger variation of landscape-level conservation strategies, also including active creation of dead wood, may be an attractive complement to the existing management. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood-Plastic Composites.

    Science.gov (United States)

    Sommerhuber, Philipp F; Welling, Johannes; Krause, Andreas

    2015-12-01

    The market share of Wood-Plastic Composites (WPC) is small but expected to grow sharply in Europe. This raises some concerns about suitable wood particles needed in the wood-based panels industry in Europe. Concerns are stimulated by the competition between the promotion of wooden products through the European Bioeconomy Strategy and wood as an energy carrier through the Renewable Energy Directive. Cascade use of resources and valorisation of waste are potential strategies to overcome resource scarcity. Under experimental design conditions, WPC made from post-consumer recycled wood and plastic (HDPE) were compared to WPC made from virgin resources. Wood content in the polymer matrix was raised in two steps from 0% to 30% and 60%. Mechanical and physical properties and colour differences were characterized. The feasibility of using cascaded resources for WPC is discussed. Results indicate the technical and economic feasibility of using recycled HDPE from packaging waste for WPC. Based on technical properties, 30% recycled wood content for WPC is feasible, but economic and political barriers of efficient cascading of biomass need to be overcome. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Mechanical Behaviour of the Wood Masonry

    Directory of Open Access Journals (Sweden)

    Fazia FOUCHAL

    2011-09-01

    Full Text Available In this paper we study the walls wood masonry behaviour. First, we propose a regulatory validation of the walls wood masonry behaviour subjected to vertical and horizontal loads according to Eurocode 5. Then we present the numerical application on the wall wood supported two floors level.

  11. Use of nanofillers in wood coatings

    DEFF Research Database (Denmark)

    Nikolic, Miroslav; Lawther, John Mark; Sanadi, Anand Ramesh

    2015-01-01

    Wood has been used for thousands of years and remains an important material in the construction industry, most often protected with coatings. Development of nanotechnology allows further improvements or new performance properties to be achieved in wood coatings. Increased UV protection...... with nanometal oxides that allow wood texture to remain seen and higher resilience to scratch and abrasion with use of different nanoparticle shapes are some of the applications that are reviewed here. A variety of possible applications together with a high level of improvements, alongside commercial factors...... like a low level of loading, have already established nanoparticles in some areas of wood coatings. This article is a comprehensive scientific review of the published work in the use of nanofillers in wood coatings....

  12. Moisture relations and physical properties of wood

    Science.gov (United States)

    Samuel V. Glass; Samuel L. Zelinka

    2010-01-01

    Wood, like many natural materials, is hygroscopic; it takes on moisture from the surrounding environment. Moisture exchange between wood and air depends on the relative humidity and temperature of the air and the current amount of water in the wood. This moisture relationship has an important influence on wood properties and performance. Many of the challenges of using...

  13. Adhesives for Achieving Durable Bonds with Acetylated Wood

    Science.gov (United States)

    Charles Frihart; Rishawn Brandon; James Beecher; Rebecca Ibach

    2017-01-01

    Acetylation of wood imparts moisture durability, decay resistance, and dimensional stability to wood; however, making durable adhesive bonds with acetylated wood can be more difficult than with unmodified wood. The usual explanation is that the acetylated surface has fewer hydroxyl groups, resulting in a harder-to-wet surface and in fewer hydrogen bonds between wood...

  14. Comparative study on liquefaction of creosote and chromated copper arsenate (CCA)-treated wood and untreated southern pine wood: effects of acid catalyst content, liquefaction time, temperature, and phenol to wood ratio

    Science.gov (United States)

    Hui Pan; Chung-Yun Hse; Todd F. Shupe

    2009-01-01

    Creosote- and chromated copper arsenate (CCA)-treated wood waste and untreated southern pine wood were liquefied with phenol and sulfuric acid. The effects of sulfuric acid content, liquefaction time, liquefaction temperature, and phenol to wood ratio on liquefaction rate (i.e., wood residue content) were investigated and analyzed by analysis of variance (...

  15. Method of stabilizing wood

    International Nuclear Information System (INIS)

    Pesek, M.; Jarkovsky, J.

    1973-01-01

    Wood is impregnated with a mixture of a vinyl or an allyl monomer (20 - 90 wt. %) and unsaturated polyester resins. The impregnated wood is then exposed to ionizing radiation at doses of 0.1 to 20 Mrad at a temperature of 60 to 180 degC. (B.S.)

  16. Switzerland's largest wood-pellet factory in Balsthal

    International Nuclear Information System (INIS)

    Stohler, F.

    2004-01-01

    This article describes how a small Swiss electricity utility has broken out of its traditional role in power generation and the distribution of electricity and gone into the production of wood pellets. The pellets, which are made from waste wood (sawdust) available from wood processing companies, are produced on a large scale in one of Europe's largest pellets production facilities. The boom in the use of wood pellets for heating purposes is discussed. The article discusses this unusual approach for a Swiss power utility, which also operates a wood-fired power station and is even involved in an incineration plant for household wastes. The markets being aimed for in Switzerland and in Europe are described, including modern low-energy-consumption housing projects. A further project is described that is to use waste wood available from a large wood processing facility planned in the utility's own region

  17. Preparation and applications of wood-polyester composites

    International Nuclear Information System (INIS)

    Czvikovszky, T.

    1982-01-01

    Optimum processing parameters were searched for the pilot-scale production of wood-polyester composites by irradiation of resin-impregnated wood material. The radiation initiation of the following systems were examined in wood and without wood matrix: methyl methacrylate, mixture of styrene and acrylonitryle, and their combination with unsaturated polyester. In the most cases the over-all rate of the complete polymerization process in wood matrix is proportional to the square root of the initiation rate. The parameters of the radiation technology of wood-polyester composites have been determined, using 260 TBq (7 kCi) 60 Co radiation source. A pilot plant has been constructed using an underwater irradiation system of 1.85 PBq (50 kCi) 60 Co. The successful production rate of 200 kg wood-polyester composite per day, as well as the application tests have demonstrated the technical feasibility of this new structural material. (author)

  18. RESISTANCE TO THE ATTACK OF DRY-WOOD TERMITES (Cryptotermes brevis) OF SIX WOOD SPECIES

    OpenAIRE

    Fabrício Gomes Gonçalves; José Tarcísio da Silva Oliveira

    2006-01-01

    The dry wood termites are one of the largest causes of damages in wood used in Brazil. This work analyzed the attackof the Cryptotermes brevis in six commercials wood species in the north of the Rio de Janeiro and south of the Espírito Santo. The testobserved the number of holes, the percentage of died individuals and the damage of the pieces. When compared to the Pinus sp(reference), the species with less susceptibility to the attack were Cedrela fissilis, Cariocar brasiliense and Goupia gla...

  19. Chapter 02: Basic wood biology—Anatomy for identification

    Science.gov (United States)

    Alex Wiedenhoeft

    2011-01-01

    Before the topics of using a hand lens, preparing wood for observation, and understanding the characters used in wood identification can be tackled, a general introduction to the biology of wood must be undertaken. The woods in commercial trade in Central America come almost exclusively from trees, so the discussion of wood biology is restricted to trees here, though...

  20. Wood for sound.

    Science.gov (United States)

    Wegst, Ulrike G K

    2006-10-01

    The unique mechanical and acoustical properties of wood and its aesthetic appeal still make it the material of choice for musical instruments and the interior of concert halls. Worldwide, several hundred wood species are available for making wind, string, or percussion instruments. Over generations, first by trial and error and more recently by scientific approach, the most appropriate species were found for each instrument and application. Using material property charts on which acoustic properties such as the speed of sound, the characteristic impedance, the sound radiation coefficient, and the loss coefficient are plotted against one another for woods. We analyze and explain why spruce is the preferred choice for soundboards, why tropical species are favored for xylophone bars and woodwind instruments, why violinists still prefer pernambuco over other species as a bow material, and why hornbeam and birch are used in piano actions.

  1. Moisture measurement in wood, wood-based materials and building materials - a literature review

    International Nuclear Information System (INIS)

    Kober, A.; Mehlhorn, L.; Plinke, B.

    1989-10-01

    Methods of moisture measurement in solid substances, especially on wood, wood-based materials and building materials were examined and evaluated according to the literature available. The question was which methods of examining the moisture distribution in building elements at climate loading offer the best accuracy and spatial resolution as well as which methods are the most appropriate at present and in future for the solution of measurement problems in the wood and wood-based industry. The most common methods are electric measurement methods which are utilizing either the moisture-depending conductivity or the dielectric constant or the reflectivity of the material for infrared radiation but they offer only a limited accuracy. The same is valid for the rarely used microwave methods or X-ray and NMR tomography. Simple electric methods will further on play an important role in the industrial process measuring technique. For the examination of building elements, methods using nuclear radiation still offer possibilities for a further development. (orig.) With 207 refs., 13 figs [de

  2. Respiratory symptoms and lung function in relation to wood dust and monoterpene exposure in the wood pellet industry.

    Science.gov (United States)

    Löfstedt, Håkan; Hagström, Katja; Bryngelsson, Ing-Liss; Holmström, Mats; Rask-Andersen, Anna

    2017-06-01

    Wood pellets are used as a source of renewable energy for heating purposes. Common exposures are wood dust and monoterpenes, which are known to be hazardous for the airways. The purpose of this study was to study the effect of occupational exposure on respiratory health in wood pellet workers. Thirty-nine men working with wood pellet production at six plants were investigated with a questionnaire, medical examination, allergy screening, spirometry, and nasal peak expiratory flow (nasal PEF). Exposure to wood dust and monoterpenes was measured. The wood pellet workers reported a higher frequency of nasal symptoms, dry cough, and asthma medication compared to controls from the general population. There were no differences in nasal PEF between work and leisure time. A lower lung function than expected (vital capacity [VC], 95%; forced vital capacity in 1 second [FEV 1 ], 96% of predicted) was noted, but no changes were noted during shifts. There was no correlation between lung function and years working in pellet production. Personal measurements of wood dust at work showed high concentrations (0.16-19 mg/m 3 ), and exposure peaks when performing certain work tasks. Levels of monoterpenes were low (0.64-28 mg/m 3 ). There was no association between exposure and acute lung function effects. In this study of wood pellet workers, high levels of wood dust were observed, and that may have influenced the airways negatively as the study group reported upper airway symptoms and dry cough more frequently than expected. The wood pellet workers had both a lower VC and FEV 1 than expected. No cross-shift changes were found.

  3. Application of a CCA-treated wood waste decontamination process to other copper-based preservative-treated wood after disposal

    Energy Technology Data Exchange (ETDEWEB)

    Janin, Amelie, E-mail: amelie.janin@ete.inrs.ca [University of Toronto, Faculty of Forestry, 33, Willcocks St., Toronto, ON, M5S 3B3 (Canada); Coudert, Lucie, E-mail: lucie.coudert@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Riche, Pauline, E-mail: pauline.riche@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Mercier, Guy, E-mail: guy_mercier@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Cooper, Paul, E-mail: p.cooper@utoronto.ca [University of Toronto, Faculty of Forestry, 33, Willcocks St., Toronto, ON, M5S 3B3 (Canada); Blais, Jean-Francois, E-mail: blaisjf@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada)

    2011-02-28

    Research highlights: {yields} This paper describes a process for the metal removal from treated (CA-, ACQ- or MCQ-) wood wastes. {yields} This sulfuric acid leaching process is simple and economic. {yields} The remediated wood could be recycled in the industry. - Abstract: Chromated copper arsenate (CCA)-treated wood was widely used until 2004 for residential and industrial applications. Since 2004, CCA was replaced by alternative copper preservatives such as alkaline copper quaternary (ACQ), copper azole (CA) and micronized copper quaternary (MCQ), for residential applications due to health concerns. Treated wood waste disposal is becoming an issue. Previous studies identified a chemical process for decontaminating CCA-treated wood waste based on sulfuric acid leaching. The potential application of this process to wood treated with the copper-based preservatives (alkaline copper quaternary (ACQ), copper azole (CA) and micronized copper quaternary (MCQ)) is investigated here. Three consecutive leaching steps with 0.1 M sulfuric acid at 75 deg, C for 2 h were successful for all the types of treated wood and achieved more than 98% copper solubilisation. The different acidic leachates produced were successively treated by coagulation using ferric chloride and precipitation (pH = 7) using sodium hydroxide. Between 94 and 99% of copper in leachates could be recovered by electrodeposition after 90 min using 2 A electrical current. Thus, the process previously developed for CCA-treated wood waste decontamination could be efficiently applied for CA-, ACQ- or MCQ-treated wood.

  4. Bioremediation of treated wood with fungi

    Science.gov (United States)

    Barbara L. Illman; Vina W. Yang

    2006-01-01

    The authors have developed technologies for fungal bioremediation of waste wood treated with oilborne or metal-based preservatives. The technologies are based on specially formulated inoculum of wood-decay fungi, obtained through strain selection to obtain preservative-tolerant fungi. This waste management approach provides a product with reduced wood volume and the...

  5. Weathering methods for preservative treated wood and their applicability for fire retarded wood

    NARCIS (Netherlands)

    Voss, A.

    1999-01-01

    preservative treated wood. The aim of the presentation is to inform you about current testing methods and to discuss their applicability to test fire retarded wood in outdoor use. Assuming that fire retardants will only be used in out of ground contact, only those methods are mentioned, which fit

  6. Wood Export and Deposition Dynamics in Mountain Watersheds

    Science.gov (United States)

    Senter, Anne Elizabeth

    Wood dynamics that store, transport, break down, and ultimately export wood pieces through watershed networks are key elements of stream complexity and ecosystem health. Efforts to quantify wood processes are advancing rapidly as technological innovations in field data collection, remotely sensed data acquisition, and data analyses become increasingly sophisticated. The ability to extend the temporal and spatial scales of wood data acquisition has been particularly useful to the investigations presented herein. The primary contributions of this dissertation are focused on two aspects of wood dynamics: watershed-scale wood export processes as identified using the depositional environment of a mountain reservoir, and wood deposition mechanisms in a bedrock-dominated mountain river. Three chapters present this work: In Chapter 1, continuous video monitoring of wood in transport revealed seasonal and diurnal hydrologic cycle influences on the variable rates at which wood transports. This effort supports the efficacy of utilizing continuous data collection methods for wood transport studies. Annual wood export data were collected via field efforts and aerial image analyses from New Bullards Bar Reservoir on the North Yuba River, Sierra Nevada, California. Examination of data revealed linkages between decadal-scale climatic patterns, large flood events, and episodic wood export quantities. A watershed-specific relation between wood export quantities and annual peak discharge contributes to the notion that peak discharge is a primary control on wood export, and yielded prediction of annual wood export quantities where no data were available. Linkages between seasonality, climatic components, and hydrologic events that exert variable control on watershed scale wood responses are presented as a functional framework. An accompanying conceptual model supports the framework presumption that wood responses are influenced by seasonal variations in Mediterranean-montane climate

  7. Wood quality changes caused by mineral fertilization

    Directory of Open Access Journals (Sweden)

    Carlos Roberto Sette Jr

    2014-06-01

    Full Text Available The diverse and important use of wood from fast growth eucalyptus plantations requires the analysis of the effect of mineral fertilizers on wood quality. The objective of this study was to evaluate the anatomical characteristics and wood density from Eucalyptus grandis trees (3 m x 2 m spacing fertilized with potassium and sodium (at planting, 6 th and 12th month. Fifteen (15 6 years old eucalyptus trees were selected (5 trees/treatment, cut and wood samples at DBH (1,3 m were taken for anatomical characteristics (fiber and vessels and wood density analysis. Results showed that eucalyptus trees treated with mineral fertilizers did not show significant alteration in average wood density, with radial profile model common to all three treatments, characterized by a values increase in the region next to the pith, toward to bark. Mineral fertilization influenced wood anatomical characteristics: treatment with sodium was characterized by thinner walls and lumen larger diameter; in treatment with potassium, larger vessels were detected.

  8. Still rethinking the value of high wood density.

    Science.gov (United States)

    Larjavaara, Markku; Muller-Landau, Helene C

    2012-01-01

    In a previous paper, we questioned the traditional interpretation of the advantages and disadvantages of high wood density (Functional Ecology 24: 701-705). Niklas and Spatz (American Journal of Botany 97: 1587-1594) challenged the biomechanical relevance of studying properties of dry wood, including dry wood density, and stated that we erred in our claims regarding scaling. We first present the full derivation of our previous claims regarding scaling. We then examine how the fresh modulus of rupture and the elastic modulus scale with dry wood density and compare these scaling relationships with those for dry mechanical properties, using almost exactly the same data set analyzed by Niklas and Spatz. The derivation shows that given our assumptions that the modulus of rupture and elastic modulus are both proportional to wood density, the resistance to bending is inversely proportional to wood density and strength is inversely proportional with the square root of wood density, exactly as we previously claimed. The analyses show that the elastic modulus of fresh wood scales proportionally with wood density (exponent 1.05, 95% CI 0.90-1.11) but that the modulus of rupture of fresh wood does not, scaling instead with the 1.25 power of wood density (CI 1.18-1.31). The deviation from proportional scaling for modulus of rupture is so small that our central conclusion remains correct: for a given construction cost, trees with lower wood density have higher strength and higher resistance to bending.

  9. CO2 abatement potential of wood utilisation. Wood as an energy carrier

    International Nuclear Information System (INIS)

    Wegener, G.; Fruehwald, A.

    1994-01-01

    Forests as ecosystems not only supply the raw material wood but also exert an influence on soils, water resources and many other ecological factors; provide animals with a habitat; and offer as humans a place for recreation. Recently, forests and wood have become of interest to human civilisation from yet another aspect: they constitute a carbon storage. This means that forestry and the forest industries can help moderate the increase of atmospheric CO 2 concentrations, which is essentially the result of energetic utilisation of fossil fuels and considered the decisive factor underlying the greenhouse effect. Besides constituting a carbon storage, forests hold an additional CO 2 abatement potential which can be realised by continuous utilisation of wood. (orig./EF) [de

  10. Development of wood decay in wound-initiated discolored wood of eastern red cedar

    Science.gov (United States)

    Walter C. Shortle; Kenneth R. Dudzik; Kevin T. Smith

    2010-01-01

    Logs of eastern red cedar, Juniperus virginiana L., with well-developed bands of light-colored wood ("included sapwood") within heartwood can be unsuitable for sawn wood products. This finding is in contrast to published information that the "included sapwood" is (1) a heartwood anomaly rather than sapwood and (2) its occurrence...

  11. The extractives of Pinus pinaster wood

    Science.gov (United States)

    Richard W. Hemingway; W. E. Hillis; L. S. Lau

    1973-01-01

    The extractives in Pinus pinaster wood grown in South Australia were examined as part of an assessment of the suitability of this wood for manufacture of absorbent tissues from bisulphite pulps. The average petroleum solubility of the wood was 2.0% but the amount and composition of the petroleum extract varied widely depending upon the age of the...

  12. Wood supply : what bioenergy resources are available as harvest residue and non-merchantable wood in New Brunswick?

    International Nuclear Information System (INIS)

    Forgrave, K.

    2005-01-01

    This paper examines resources available for bioenergy production in New Brunswick. An estimate of New Brunswick harvest levels, based on New Brunswick Forest Products Association web site figures was presented. Private wood lots harvest levels were also provided, with all estimates based on volume per year. Market conditions were discussed, with an emphasis on the dictates of price and availability for private wood lot owners. Market conditions and unused volume statistics were discussed. Various forest management options include the use of veneer, saw log, stud wood and pulp wood. Details of bioenergy percentages and potential were presented and general silviculture issues were discussed. It was concluded that many of the trade-offs of bioenergy involve placing more demands on forests, and that purchase prices will increasingly dictate volumes obtained from private wood lots. tabs, figs

  13. Potential recovery of industrial wood and energy wood raw material in different cutting and climate scenarios for Finland

    International Nuclear Information System (INIS)

    Kaerkkaeinen, Leena; Nuutinen, Tuula; Matala, Juho; Kellomaeki, Seppo; Haerkoenen, Kari

    2008-01-01

    The aim of this study was to estimate the simultaneous recovery of industrial wood and raw material for energy wood from cuttings in Finland during the next 50 years. Two cutting scenarios (maximum and sustainable cuttings) and two climate scenarios (current and changing climate) were analysed to determine their impacts on harvesting potential. The analysis was carried out using sample plot and tree data from the ninth National Forest Inventory and a management-oriented large-scale forestry model (MELA) into which the transfer functions based on physiological modelling were incorporated to describe the impacts of climate change. Depending on the climate scenario, the volume of potential recovery of industrial wood in the maximum cutting scenario during the period 2003-2013 varied from 103 to 105 million m 3 a -1 , while the amount of potential energy wood raw material was 35 Tg a -1 . During the period 2043-2053, in the current climate scenario, the potential recovery of industrial wood was 64 million m 3 a -1 and energy wood raw material 22 Tg a -1 , and in the changing climate scenario, 85 million m 3 a -1 and 29 Tg a -1 , respectively. In the sustainable cutting scenario, depending on the climate scenario used, the potential recovery of industrial wood during the period 2003-2013 varied from 74 to 76 million m 3 a -1 , while the amount of potential energy wood was 25 Tg a -1 . During the period 2043-2053, in the current climate scenario, the potential recovery of industrial wood was 80 million m 3 a -1 and energy wood raw material 26 Tg a -1 , and in the changing climate scenario, 88 million m 3 a -1 and 29 Tg a -1 , respectively. (author)

  14. Wood-based composite materials : panel products, glued-laminated timber, structural composite lumber, and wood-nonwood composite materials

    Science.gov (United States)

    Nicole M. Stark; Zhiyong Cai; Charles Carll

    2010-01-01

    This chapter gives an overview of the general types and composition of wood-based composite products and the materials and processes used to manufacture them. It describes conventional wood-based composite panels and structural composite materials intended for general construction, interior use, or both. This chapter also describes wood–nonwood composites. Mechanical...

  15. Wood energy 2000; Bois energie 2000

    Energy Technology Data Exchange (ETDEWEB)

    Druette, L [Centre Scientifique et Technique du Batiment, (CSTB), 44 - Nantes (France); Lacome, T [AFNOR, 75 - Paris (France); Roy, C [Agence de l' Environnement et de la Maitrise de l' Energie, ADEME, 75 - Paris (France); and others

    2000-07-01

    The deregulation of the Electric Market and the opening of the Green Certificate exchange market force the set up of renewable energies. The wood, which is for most of european countries an important part of renewable fuel, should see the increase of its utilization. This conference on the wood energy deals the main aspects of this energy development. The papers present the wood burning furnaces technology assessment, the wood fuel market and the standardization of the appliances in this domain. Some papers also include the consequences of the big storms of december 1999. (A.L.B.)

  16. Wood waste in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Matos, O; Ribeiro, R [Biomass Centre for Energy - CBE, Miranda do Corvo (Portugal)

    1998-12-31

    The energy policy of the EC, as well as most of member states points to a sizeable increase of energy production based on renewable energy sources, wood, wood residues, agricultural residues, energy crops including SRF, organic sludges, solid residues, etc. Most recent goals indicate a desirable duplication of today`s percentage by 2010. The reasons for this interest, besides diversification of sources, less dependence on imported fuels, use of endogenous resources, expected decrease of fossil fuel reserves, use of available land, additional employment and income for rural communities, etc., are related to important environmental benefits namely in terms of emissions of hot house gases. Wood waste, resulting from forest operations, cleaning, cultural and final cuttings, and from wood based industries, constitute a special important resource by reason of quality and availability. In addition to this they do not require additional land use and the removal is beneficial. In the run-up to the becoming December`s 1997 `Climate Change Summit` in Kioto, there is mounting pressure on companies to plan on carbon cuts. (author) 6 refs., 1 tab.

  17. Wood waste in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Matos, O.; Ribeiro, R. [Biomass Centre for Energy - CBE, Miranda do Corvo (Portugal)

    1997-12-31

    The energy policy of the EC, as well as most of member states points to a sizeable increase of energy production based on renewable energy sources, wood, wood residues, agricultural residues, energy crops including SRF, organic sludges, solid residues, etc. Most recent goals indicate a desirable duplication of today`s percentage by 2010. The reasons for this interest, besides diversification of sources, less dependence on imported fuels, use of endogenous resources, expected decrease of fossil fuel reserves, use of available land, additional employment and income for rural communities, etc., are related to important environmental benefits namely in terms of emissions of hot house gases. Wood waste, resulting from forest operations, cleaning, cultural and final cuttings, and from wood based industries, constitute a special important resource by reason of quality and availability. In addition to this they do not require additional land use and the removal is beneficial. In the run-up to the becoming December`s 1997 `Climate Change Summit` in Kioto, there is mounting pressure on companies to plan on carbon cuts. (author) 6 refs., 1 tab.

  18. Environmental assessment of domestic wood heating

    International Nuclear Information System (INIS)

    Labouze, E.; Le Guerin, Y.

    2009-01-01

    In France, more than 6 million families are concerned with the domestic use of wood energy. The wood energy plan of ADEME aims at encouraging the development of wood energy in three sectors: domestic, collective/tertiary, industrial. In that context, ADEME commissioned BIO Intelligence Service a life cycle assessment of collective and industrial heating in order to give objective environmental information and to analyse the strength and weakness of wood heating. Three scenarios were defined according to the origin of wood: firewood, granules and sawmill chips. The study also proposes a comparison to other heating systems: gas, fuel oil and electricity. The life cycle analysis applied to domestic heating consists in quantifying the environmental impacts of the whole linked steps: extraction of fuel, distribution, final use... Every system under study has been divided according to three main stages: - Extraction of raw materials; - Transport of fuels until the place of storage or distribution; - Use (combustion or upstream production of energy in the case of electricity). The environmental impacts are estimated with the following indicators: - Non renewable primary energy balance sheet; - Global warming potential; - Air acidification potential; - Eutrophication potential; - Emissions of toxic metals in air and in soils. The results show that wood heating have the best energy and global warming balance sheets. For air acidification, the combustion stage is pre-dominant regardless of the energy resource. This is mainly due to nitrogen and sulphur oxides airborne emissions. For wood heating, preparation requires fuel consumption which also contributes significantly to nitrogen oxides emissions. The comparison with conventional energy shows that the wood scenarios are well positioned in relation to fuel and electricity for this indicator. Gas appears to be the best heating option for this indicator. The contribution eutrophication is also due to nitrogen oxides airborne

  19. Precision wood particle feedstocks

    Science.gov (United States)

    Dooley, James H; Lanning, David N

    2013-07-30

    Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

  20. Optimising hydrogen bonding in solid wood

    DEFF Research Database (Denmark)

    Engelund, Emil Tang

    2009-01-01

    The chemical bonds of wood are both covalent bonds within the wood polymers and hydrogen bonds within and between the polymers. Both types of bonds are responsible for the coherence, strength and stiffness of the material. The hydrogen bonds are more easily modified by changes in load, moisture...... and temperature distorting the internal bonding state. A problem arises when studying hydrogen bonding in wood since matched wood specimens of the same species will have very different internal bonding states. Thus, possible changes in the bonding state due to some applied treatment such as conditioning...... maintaining 100 % moisture content of the wood. The hypothesis was that this would enable a fast stress relaxation as a result of reorganization of bonds, since moisture plasticizes the material and temperature promotes faster kinetics. Hereby, all past bond distortions caused by various moisture, temperature...

  1. Science supporting the economic and environmental benefits of using wood and wood products in green building construction

    Science.gov (United States)

    Michael A. Ritter; Kenneth Skog; Richard Bergman

    2011-01-01

    The objective of this report is to summarize the scientific findings that support the environmental and economic benefits of using wood and wood products in green building construction. Despite documented advantages in many peer-reviewed scientific articles, most building professionals and members of the public do not recognize wood as a renewable resource or the role...

  2. Heat sterilization of wood

    Science.gov (United States)

    Xiping Wang

    2010-01-01

    Two important questions should be considered in heat sterilizing solid wood materials: First, what temperature–time regime is required to kill a particular pest? Second, how much time is required to heat the center of any wood configuration to the kill temperature? The entomology research on the first question has facilitated the development of international standards...

  3. How James Wood Works

    Science.gov (United States)

    Goldstein, Evan R., Comp.

    2008-01-01

    Reading through news-media clippings about James Wood, one might reasonably conclude that "pre-eminent critic" is his official job title. In fact, Wood is a staff writer for "The New Yorker" and a professor of the practice of literary criticism at Harvard University. But at a time when there is much hand-wringing about the death of the…

  4. Waste-wood resource supply assessment. Final report

    International Nuclear Information System (INIS)

    1991-08-01

    The report documents and analyzes the availability and supply of wood waste in New York State to determine the type and amount currently generated to estimate its potential future use as a fuel. Detailed, current information is included on the availability, quantity and price of wood waste. Topics include wood waste markets; the harvesting and supply infrastructure; current and project prices; competing markets; environmental impacts of harvesting, processing and burning wood waste for fuel; and factors affecting long-term availability and supply. New York State's waste wood resource was evaluated to complete the Energy Authority's recent investigation of the potential role of wood in producing electric power. In 1989 approximately 11.8 million tons of wood waste were generated in New York State. More than 8 million tons or 68 percent, were disposed of by municipal solid waste and construction and demolition debris facilities. Just under 3.8 million tons or 32 percent, were reused and/or recycled. More than 25.7 million tons of wood waste could be available annually for fuel. Of the amount, more than 17.2 million tons per year, or 67 percent, could be produced by silvicultural activities that improve the health and productivity of forests

  5. WGDB: Wood Gene Database with search interface.

    Science.gov (United States)

    Goyal, Neha; Ginwal, H S

    2014-01-01

    Wood quality can be defined in terms of particular end use with the involvement of several traits. Over the last fifteen years researchers have assessed the wood quality traits in forest trees. The wood quality was categorized as: cell wall biochemical traits, fibre properties include the microfibril angle, density and stiffness in loblolly pine [1]. The user friendly and an open-access database has been developed named Wood Gene Database (WGDB) for describing the wood genes along the information of protein and published research articles. It contains 720 wood genes from species namely Pinus, Deodar, fast growing trees namely Poplar, Eucalyptus. WGDB designed to encompass the majority of publicly accessible genes codes for cellulose, hemicellulose and lignin in tree species which are responsive to wood formation and quality. It is an interactive platform for collecting, managing and searching the specific wood genes; it also enables the data mining relate to the genomic information specifically in Arabidopsis thaliana, Populus trichocarpa, Eucalyptus grandis, Pinus taeda, Pinus radiata, Cedrus deodara, Cedrus atlantica. For user convenience, this database is cross linked with public databases namely NCBI, EMBL & Dendrome with the search engine Google for making it more informative and provides bioinformatics tools named BLAST,COBALT. The database is freely available on www.wgdb.in.

  6. Southern Woods-Burners: A Descriptive Analysis

    Science.gov (United States)

    M.L. Doolittle; M.L. Lightsey

    1979-01-01

    About 40 percent of the South's nearly 60,000 wildfires yearly are set by woods-burners. A survey of 14 problem areas in four southern States found three distinct sets of woods-burners. Most active woods-burners are young, white males whose activities are supported by their peers. An older but less active group have probably retired from active participation but...

  7. Cone calorimeter tests of wood composites

    Science.gov (United States)

    Robert H. White; Kuma Sumathipala

    2013-01-01

    The cone calorimeter is widely used for the determination of the heat release rate (HRR) of building products and other materials. As part of an effort to increase the availability of cone calorimeter data on wood products, the U.S. Forest Products Laboratory and the American Wood Council conducted this study on composite wood products in cooperation with the Composite...

  8. Western Canadian wood residue production and consumption trends

    International Nuclear Information System (INIS)

    McCloy, B.

    2006-01-01

    This presentation considered various trends in western Canadian wood residue production and consumption. Potential markets for wood residue products were also discussed. Trends were reviewed by province for the years 2000-2004. British Columbia (BC) is currently the largest producer of residue in the country, and also retains the largest surpluses of bark, sawdust and shavings. Wood residues in BC are used in pulp and plywood mill production, as well as in the creation of particleboard and MDF. Surplus mill wood residue production in the province has greatly increased due to the Mountain Pine Beetle (MPB) infestation, which has in turn spurred expansion of the BC interior sawmill industry. The infestation has also resulted in a glut of pulp chips. Current wood residue products in Alberta are mostly used in pulp mill combined heat and power (CHP) systems, as well as for wood pellet production and the creation of particleboard and MDF. It was noted that surplus residues are rapidly declining in the province. Saskatchewan's wood residue storage piles are estimated to contain 2,900,000 BDt, while Manitoba surpluses are relatively minor. It was suggested that high natural gas prices have increased the payback on wood energy systems to approximately 2 years. The value of wood residue is now greater than $100/BDt as a substitute for natural gas once the wood energy system has been fully depreciated. Sawmills may now wish to consider equipping themselves to sell wood residue products, as most sawmills only require 20 per cent of their residues for heating purposes. It was concluded that markets for hog fuel wood pellets should be developed in Canada and internationally. Future markets may also develop if natural gas currently used in pulp mill power boilers and lime kilns is replaced with wood residue energy systems. refs., tabs., figs

  9. Decay resistance of wood-plastic composites reinforced with extracted or delignified wood flour

    Science.gov (United States)

    Rebecca E. Ibach; Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Yongming Fan; Jianmin Gao

    2014-01-01

    The moisture and decay resistance of wood-plastic composites (WPCs) reinforced with extracted or delignified wood flour (WF) was investigated. Three different extractions were preformed: toluene/ethanol (TE), acetone/water (AW), and hot water (HW). Delignification (DL) was performed using a sodium chlorite/acetic acid solution. All WPCs specimens were made with 50% by...

  10. 5000 sustainable workplaces - Wood energy provides work

    International Nuclear Information System (INIS)

    Keel, A.

    2009-01-01

    This article presents the results of a study made by the Swiss Wood Energy Association on the regional and national added value resulting from large wood-fired installations in Switzerland. The number of workplaces created by these installations is also noted. Wood energy is quoted as not only being a way of using forest wastes but also as being a creator of employment. Large wood-fired heating installations are commented on and efforts to promote this type of energy supply even further are discussed. The study indicates which professions benefit from the use of wood energy and quantifies the number of workplaces per megawatt of installed power that result.

  11. Corrosion of metals in wood : comparing the results of a rapid test method with long-term exposure tests across six wood treatments

    Science.gov (United States)

    Samuel L. Zelinka; Donald S. Stone

    2011-01-01

    This paper compares two methods of measuring the corrosion of steel and galvanized steel in wood: a long-term exposure test in solid wood and a rapid test method where fasteners are electrochemically polarized in extracts of wood treated with six different treatments. For traditional wood preservatives, the electrochemical extract method correlates with solid wood...

  12. USE OF CANDEIA’S (Eremanthus erythropappus WASTE WOOD

    Directory of Open Access Journals (Sweden)

    Rosimeire Cavalcante dos Santos

    2008-09-01

    Full Text Available The candeia (Eremanthus erythropappus is a native forest species with multiple uses and specially utilized as essential oils source. The use of the candeia´s waste wood after oil extraction for particle panels production becomes a viable alternative, avoiding environmental problems and increasing the availability of these products in the consuming market. This work verified the viability of producing wood-cement panels using waste wood generated after the extraction of candeia’s oil, in association with pinus and eucalipto woods. The experiment was installed according to a completely randomized design with three repetitions. The treatments were arranged according to a factorial 2 x 3 scheme (two wooden species and three replacement percentages of the woods by candeia’s waste. The results of the physical and mechanical property tests showed high potentiality of candeia waste wood, after oil extraction, in association with pinus and eucalipto wood for manufacturing wood-cement panels.

  13. Wood energy barometer. 43 million toe produced in 2003

    International Nuclear Information System (INIS)

    Anon.

    2004-01-01

    The use of wood in the form of energy contributes in fighting global warming since, unlike fossil energies, the carbon dioxide emitted by its combustion is reabsorbed by the forests. These environmental and energetic advantages explain why the European Union large wood countries are preparing programmes to develop both wood energy technologies and wood energy consumption; This document takes stock or gives information on the breakdown of valorization of wood energy origin primary energy, the gross electricity generation from wood energy in the 15 european union countries and Poland, the primary energy from wood energy, the comparative between different wood energy fuel prices in Europe, the number of direct and indirect job created in different sectors, the wood energy sector industrialists and a comparison between current trend and white paper objectives. (A.L.B.)

  14. Furniture wood wastes: Experimental property characterisation and burning tests

    International Nuclear Information System (INIS)

    Tatano, Fabio; Barbadoro, Luca; Mangani, Giovanna; Pretelli, Silvia; Tombari, Lucia; Mangani, Filippo

    2009-01-01

    Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected 'raw' and primarily 'engineered' ('composite') wood wastes. The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in 'engineered' wood wastes as compared with 'raw' wood wastes; and relatively high energy content values of 'engineered' wood wastes (ranging on the whole from 3675 to 5105 kcal kg -1 for HHV, and from 3304 to 4634 kcal kg -1 for LHV). The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in 'engineered' wood burning tests of pyrroles and amines, as well as the additional presence (as compared with 'raw' wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon. Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in 'engineered' wood burning tests as compared with 'raw' wood burning test; and considerable generation of the respirable PM 1 fraction during incomplete industrial wood burning.

  15. Wood-Based Nanotechnologies toward Sustainability.

    Science.gov (United States)

    Jiang, Feng; Li, Tian; Li, Yiju; Zhang, Ying; Gong, Amy; Dai, Jiaqi; Hitz, Emily; Luo, Wei; Hu, Liangbing

    2018-01-01

    With over 30% global land coverage, the forest is one of nature's most generous gifts to human beings, providing shelters and materials for all living beings. Apart from being sustainable, renewable, and biodegradable, wood and its derivative materials are also extremely fascinating from a materials aspect, with numerous advantages including porous and hierarchical structure, excellent mechanical performance, and versatile chemistry. Here, strategies for designing novel wood-based materials via advanced nanotechnologies are summarized, including both the controllable bottom-up assembly from the highly crystalline nanocellulose building block and the more efficient top-down approaches directly from wood. Beyond material design, recent advances regarding the sustainable applications of these novel wood-based materials are also presented, focusing on areas that are traditionally dominated by man-made nonrenewable materials such as plastic, glass, and metals, as well as more advanced applications in the areas of energy storage, wastewater treatment and solar-steam-assisted desalination. With all recent progress pertaining to materials' design and sustainable applications presented, a vision for the future engineering of wood-based materials to promote continuous and healthy progress toward true sustainability is outlined. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Wood decomposition as influenced by invertebrates.

    Science.gov (United States)

    Ulyshen, Michael D

    2016-02-01

    The diversity and habitat requirements of invertebrates associated with dead wood have been the subjects of hundreds of studies in recent years but we still know very little about the ecological or economic importance of these organisms. The purpose of this review is to examine whether, how and to what extent invertebrates affect wood decomposition in terrestrial ecosystems. Three broad conclusions can be reached from the available literature. First, wood decomposition is largely driven by microbial activity but invertebrates also play a significant role in both temperate and tropical environments. Primary mechanisms include enzymatic digestion (involving both endogenous enzymes and those produced by endo- and ectosymbionts), substrate alteration (tunnelling and fragmentation), biotic interactions and nitrogen fertilization (i.e. promoting nitrogen fixation by endosymbiotic and free-living bacteria). Second, the effects of individual invertebrate taxa or functional groups can be accelerative or inhibitory but the cumulative effect of the entire community is generally to accelerate wood decomposition, at least during the early stages of the process (most studies are limited to the first 2-3 years). Although methodological differences and design limitations preclude meta-analysis, studies aimed at quantifying the contributions of invertebrates to wood decomposition commonly attribute 10-20% of wood loss to these organisms. Finally, some taxa appear to be particularly influential with respect to promoting wood decomposition. These include large wood-boring beetles (Coleoptera) and termites (Termitoidae), especially fungus-farming macrotermitines. The presence or absence of these species may be more consequential than species richness and the influence of invertebrates is likely to vary biogeographically. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

  17. Wood Programs. Courseware Evaluation for Vocational and Technical Education.

    Science.gov (United States)

    Kaylor, Robert; And Others

    This courseware evaluation rates the Wood Programs software developed by the Iowa Department of Public Instruction. (These programs--not contained in this document--include understanding board feet, wood characteristics, wood safety drill, wood dimensions, wood moisture, operating the table saw, radial arm, measurement drill, fraction drill, and…

  18. COMBUSTION PROPERTIES OF EUCALYPTUS WOOD

    Directory of Open Access Journals (Sweden)

    Yalçın ÖRS

    1999-03-01

    Full Text Available In this study, the combustion properties of some impregnation materials (abiotic and biotic factors used for eucalyptus wood in interior or exterior environments were investigated. The experimental samples were prepared from Eucalyptus wood based on ASTM-D-1413-76 Tanalith-CBC, boric acid, borax, vacsol-WR, immersol-WR, polyethylen glycole-400 and ammonium sulphate were used as an impregnation material. The results indicated that, vacuum treatment on Eucalyptus gave the lowest retention value of salts. Compounds containing boron+salt increased fire resistance however water repellents decreased the wood flammability.

  19. European wood-pastures in transition

    DEFF Research Database (Denmark)

    Wood-pastures are important elements of European cultural identity and have an exceptional ecological value, yet they are in decline all over Europe. The structure of wood-pastures is strongly influenced by grazing and multiple other land uses and by local and regional environmental conditions....... This book examines the diverse expressions of wood-pastures across Europe. It provides a new perspective, using a social-ecological framework to explore social and ecological values, governing institutions, threats and conservation approaches. It explores the major drivers of decline, which are shown...

  20. Variation in root wood anatomy

    NARCIS (Netherlands)

    Cutler, D.F.

    1976-01-01

    Variability in the anatomy of root wood of selected specimens particularly Fraxinus excelsior L. and Acer pseudoplatanus L. in the Kew reference microscope slide collection is discussed in relation to generalised statements in the literature on root wood anatomy.

  1. Properties of wood-plastic composites (WPCs) reinforced with extracted and delignified wood flour

    Science.gov (United States)

    Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan

    2014-01-01

    The water sorption and mechanical properties of wood-plastic composites (WPCs) made of extracted and delignified wood flour (WF) has been investigated. WF was prepared by extraction with the solvent systems toluene/ethanol (TE), acetone/water (AW), and hot water (HW), and its delignification was conducted by means of sodium chlorite/acetic acid (AA) solution. A 2 4...

  2. Potential of Reinforced Indonesian Glulam Beams Using Grade I (Bengkirai, Grade II (Kamper, Grade III (Nyatoh Woods for Use in Structural Wood Design

    Directory of Open Access Journals (Sweden)

    Saptahari Sugiri

    2016-05-01

    Full Text Available Wood is a natural resource that is renewable and available in various species in tropical countries. Its abundancy in nature makes it easy to obtain, thus making it a nature friendly material for use in construction. Indonesia is the most important source of tropical wood in the world after Brazil, making the use of wood for structural elements very desirable. It is estimated that 4000 different varieties of wood exist in Indonesia. This estimate is based on the herbarium species collected by the Forestry Research Institute, currently counting nearly 4000 types of trees with a diameter of more than 40 cm. In the Indonesian wood structure code, the strength of woods is divided into 3 grades (grade I, II and III. This paper presents an evaluation of the mechanical properties of glulam wood sourced from native Indonesian timber: Bengkirai wood (grade I, Kamper wood (grade II, and Nyatoh wood (grade III, thus proving the potential for Indonesian wood as industrial structural elements in wooden constructions.

  3. Wood energy in Switzerland - fillet steaks and sausages

    International Nuclear Information System (INIS)

    Keel, A.

    2004-01-01

    This article discusses the increasing use of wood energy to help meet Switzerland's energy needs. The increasing interest in wood-fired systems in comparison with fossil fuels is commented on. The article presents figures on energy carriers and the shares of the energy supply they meet as well as the development of wood-fired systems between 1991 and 2003. The influence of Swiss regional identities on the market for wood heating systems is discussed, as are difficulties resulting from stop-and-go governmental promotional funding. The importance of wood-fired energy systems for local authorities with difficulties in selling wood from their communal forestry departments is also discussed

  4. Forest biomass and wood waste resources

    Science.gov (United States)

    K. Skog; P. Lebow; D.. Dykstra; P.. Miles; B.J. Stokes; R.D. Perlack; M. Buford; J. Barbour; D. McKeever

    2011-01-01

    This chapter provides estimates of forest biomass and wood waste quantities, as well as roadside costs (i.e., supply curves) for each county in the contiguous United States. Roadside price is the price a buyer pays for wood chips at a roadside in the forest, at a processing mill location in the case of mill residue, or at a landfill for urban wood wastes prior to any...

  5. Selected mechanical properties of modified beech wood

    Directory of Open Access Journals (Sweden)

    Jiří Holan

    2008-01-01

    Full Text Available This thesis deals with an examination of mechanical properties of ammonia treated beach wood with a trademark Lignamon. For determination mechanical properties were used procedures especially based on ČSN. From the results is noticeable increased density of wood by 22% in comparison with untreated beach wood, which makes considerable increase of the most mechanical wood properties. Considering failure strength was raised by 32% and modulus of elasticity was raised at average about 46%.

  6. The wood, renewable energy

    International Nuclear Information System (INIS)

    Acket, C.

    2006-12-01

    This document evaluates the french forest situation and its future. Indeed, the wood energy constitutes in France the first renewable energy after the hydraulic. It presents the today situation of the french forest providing statistical data, evaluation of the energy estimation, the carbon fixation, the resources, the perspectives wood energy for 2050, the biofuels and an economic analysis. (A.L.B.)

  7. Wood supply and demand

    Science.gov (United States)

    Peter J. Ince; David B. McKeever

    2011-01-01

    At times in history, there have been concerns that demand for wood (timber) would be greater than the ability to supply it, but that concern has recently dissipated. The wood supply and demand situation has changed because of market transitions, economic downturns, and continued forest growth. This article provides a concise overview of this change as it relates to the...

  8. Chemical modification of wood

    Science.gov (United States)

    Roger M. Rowell

    2007-01-01

    After millions of years of evolution, wood was designed to perform in a wet environment, and nature is programmed to recycle it, in a timely way, back to the basic building blocks of carbon dioxide and water through biological, thermal, aqueous, photochemical, chemical, and mechanical degradation. The properties of wood are, for the most part, a result of the chemistry...

  9. Utilisation of Estonian energy wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Muiste, P.; Tullus, H.; Uri, V. [Estonian Agricultural University, Tartu (Estonia)

    1996-12-31

    In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

  10. Utilisation of Estonian energy wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Muiste, P; Tullus, H; Uri, V [Estonian Agricultural University, Tartu (Estonia)

    1997-12-31

    In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

  11. A geographical analysis of the Swedish wood fuel market

    International Nuclear Information System (INIS)

    Roos, Anders; Bohlin, Folke; Hektor, Bo; Hillring, Bengt; Parikka, Matti

    2000-01-01

    The geographical variation in Swedish wood fuel market characteristics for the district heating sector has been studied using Geographical Information Systems (GIS) and cross-sectional Tobit analysis. The results indicate that local availability and competition for wood fuels influence the wood fuel consumption at inland heating plants. The factors affecting the decision to use wood fuel at heating plants close to seaports, however, were not captured by the model, suggesting that coastal location reduces dependency on the local wood fuel market. The effects of changes in local wood fuel availability on wood fuel use by an inland heating plant are presented and discussed

  12. Construction of Hydrophobic Wood Surface and Mechanical Property of Wood Cell Wall on Nanoscale Modified by Dimethyldichlorosilane

    Science.gov (United States)

    Yang, Rui; Wang, Siqun; Zhou, Dingguo; Zhang, Jie; Lan, Ping; Jia, Chong

    2018-01-01

    Dimethyldichlorosilane was used to improve the hydrophobicity of wood surface. The water contact angle of the treated wood surface increased from 85° to 143°, which indicated increased hydrophobicity. The nanomechanical properties of the wood cell wall were evaluated using a nanoindentation test to analyse the hydrophobic mechanism on the nano scale. The elastic modulus of the cell wall was significantly affected by the concentration but the influence of treatment time is insignificant. The hardness of the cell wall for treated samples was significantly affected by both treatment time and concentration. The interaction between treatment time and concentration was extremely significant for the elastic modulus of the wood cell wall.

  13. Wood pellets for stoker burner

    International Nuclear Information System (INIS)

    Nykaenen, S.

    2000-01-01

    The author of this article has had a stoker for several years. Wood chips and sod peat has been used as fuels in the stoker, either separately or mixed. Last winter there occurred problems with the sod peat due to poor quality. Wood pellets, delivered by Vapo Oy were tested in the stoker. The price of the pellets seemed to be a little high 400 FIM/500 kg large sack. If the sack is returned in good condition 50 FIM deposit will be repaid to the customer. However, Vapo Oy informed that the calorific value of wood pellets is three times higher than that of sod peat so it should not be more expensive than sod peat. When testing the wood pellets in the stoker, the silo of the stoker was filled with wood pellets. The adjustments were first left to position used for sod peat. However, after the fire had ignited well, the adjustments had to be decreased. The content of the silo was combusted totally. The combustion of the content of the 400 litter silo took 4 days and 22 hours. Respectively combustion of 400 l silo of good quality sod peat took 2 days. The water temperature with wood pellets remained at 80 deg C, while with sod peat it dropped to 70 deg C. The main disadvantage of peat with small loads is the unhomogenous composition of the peat. The results of this test showed that wood pellets will give better efficiency than peat, especially when using small burner heads. The utilization of them is easier, and the amount of ash formed in combustion is significantly smaller than with peat. Wood pellets are always homogenous and dry if you do not spoil it with unproper storage. Pellets do not require large storages, the storage volume needed being less than a half of the volume needed for sod peat. When using large sacks the amount needed can even be transported at the trunk of a passenger car. Depending on the area to be heated, a large sack is sufficient for heating for 2-3 weeks. Filling of stoker every 2-5 day is not an enormous task

  14. Water repellents and water-repellent preservatives for wood

    Science.gov (United States)

    R. Sam. Williams; William C. Feist

    1999-01-01

    Water repellents and water-repellent preservatives increase the durability of wood by enabling the wood to repel liquid water. This report focuses on water-repellent finishes for wood exposed outdoors above ground. The report includes a discussion of the effects of outdoor exposure on wood, the characteristics of water repellent and water-repellent preservative...

  15. Tannins in tropical woods

    Energy Technology Data Exchange (ETDEWEB)

    Doat, J

    1978-01-01

    A preliminary study was made of the chemistry of pyrogallol- and catecholtannins, their general properties and methods of extraction and determination. Three methods of estimation - Lowenthal, powdered hide and spectrophotometry - were compared using two control solutions, four samples of wood and one of bark. Using the empirical powdered hide method, tannins of both types were estimated in wood and bark of various tropical species (some separately and some as a mixture), Moroccan oaks (Quercus suber and Q. ilex), and European oak 9Q. petraea). Further tests were made on the wood and bark of the two mangrove species, Rhizophora mangle and R. racemosa, by subjecting them to successive extraction with a range of solvents. None of the woods tested had as much as the 10% of tannins considered necessary in economic sources. The bark of the two mangroves, of Eucalyptus urophylla and of Prosopis africana had tannin contents over 10% and the latter two species had very favorable tannin/non-tannin ratios. All the tropical species, with the probable exception of E. urophylla, had only catecholtannins. Only the oaks and E. urophylla bark gave positive results when tested for gallotannins.

  16. Ethanol from wood 'can be competitive'

    Energy Technology Data Exchange (ETDEWEB)

    1981-06-19

    Estimates by Stones and Webster indicate that the cost of producing ethanol for fuel purposes from wood will be as cheap as any other method and comparable with proven sugarcane and maize technology. In coming to this conclusion, it was assumed that significant advances would be made in the hydrolysis of wood and that saleable by-products would be possible from the lignin and hemicellulose of the feedstock wood.

  17. Bio-energy in the wood processing industry. Manual for energy production from residual matter for the wood processing industry

    International Nuclear Information System (INIS)

    Van Halen, C.J.G.; Arninkhof, M.J.C.; Rommens, P.J.M.; Karsch, P.

    2000-04-01

    This manual is published within the framework of a project, financed by Novem (EWAB programme) and the European Commission (Altener programme). Similar manuals were drafted in Germany, England and Sweden. The basis of the project was the manual 'Quality manual for small-scale wood incineration and wood gasification', published by Novem in 1998. That quality manual was drafted on the basis of an evaluation of a number of wood combustion and wood gasification projects. The original manual has been improved as a result of comments made by experts in the field of bio-energy. Updated information was added with respect to legislation, financing options and new technology. Also the manual is focused more on the wood processing industry

  18. Selection and application of exterior stains for wood

    Science.gov (United States)

    R. Sam. Williams; William C. Feist

    1999-01-01

    Exterior stains for wood protect the wood surface from sunlight and moisture. Because stains are formulated to penetrate the wood surface, they are not prone to crack or peel as can film-forming finishes, such as paints. This publication describes the properties of stains and wood, methods for applying stains, and the expected service life of stains.

  19. Housing and the wood industry, trends & market conditions

    Science.gov (United States)

    Urs Buehlmann; Matt Bumgardner; Al Schuler; K. Koenig

    2011-01-01

    Housing markets continue to have major impacts on the secondary wood industry. So, what are the steps being taken by wood products manufacturers in order to stay viable? As a follow-up to last year's article, "Housing Market's Impact on the Secondary Woodworking Industry" (Wood & Wood Products, July 2010), the focus of this year's study was...

  20. Moisture transport in coated wood

    NARCIS (Netherlands)

    Meel, P.A. van; Erich, S.J.F.; Huinink, H.P.; Kopinga, K.; Jong, J. DE; Adan, O.C.G.

    2011-01-01

    Moisture accumulation inside wood causes favorable conditions for decay. Application of a coating alters the moisture sorption of wood and prevents accumulation of moisture. This paper presents the results of a nuclear magnetic resonance (NMR) study on the influence of a coating on the moisture

  1. Waste wood as bioenergy feedstock. Climate change impacts and related emission uncertainties from waste wood based energy systems in the UK.

    Science.gov (United States)

    Röder, Mirjam; Thornley, Patricia

    2018-04-01

    Considering the urgent need to shift to low carbon energy carriers, waste wood resources could provide an alternative energy feedstock and at the same time reduce emissions from landfill. This research examines the climate change impacts and related emission uncertainties of waste wood based energy. For this, different grades of waste wood and energy application have been investigated using lifecycle assessment. Sensitivity analysis has then been applied for supply chain processes and feedstock properties for the main emission contributing categories: transport, processing, pelletizing, urea resin fraction and related N 2 O formation. The results show, depending on the waste wood grade, the conversion option, scale and the related reference case, that emission reductions of up to 91% are possible for non-treated wood waste. Compared to this, energy from treated wood waste with low contamination can achieve up to 83% emission savings, similar to untreated waste wood pellets, but in some cases emissions from waste wood based energy can exceed the ones of the fossil fuel reference - in the worst case by 126%. Emission reductions from highly contaminated feedstocks are largest when replacing electricity from large-scale coal and landfill. The highest emission uncertainties are related to the wood's resin fraction and N 2 O formation during combustion and, pelletizing. Comparing wood processing with diesel and electricity powered equipment also generated high variations in the results, while emission variations related to transport are relatively small. Using treated waste wood as a bioenergy feedstock can be a valid option to reduce emissions from energy production but this is only realisable if coal and landfill gas are replaced. To achieve meaningful emission reduction in line with national and international climate change targets, pre-treatment of waste wood would be required to reduce components that form N 2 O during the energy conversion. Copyright © 2017

  2. Brazilian sawn wood price and income elasticity

    Directory of Open Access Journals (Sweden)

    Rommel Noce

    2010-09-01

    Full Text Available This study estimated the sawn wood demand price and income elasticity. Specifically it was estimated the priceelasticity of sawn wood, the cross price elasticity of wood panels and the income elasticity of Brazilian GDP. A log-log model withcorrection through outline of the mobile average (MA(1 was used, adjusted for the period of 1971 to 2006, which showed to bestable, with satisfactory significance levels. It was observed that sawn wood demand is inelastic in relation to price and elastic inrelation to income.

  3. Turning wood residues into wood revenues

    International Nuclear Information System (INIS)

    Graham, R.G.; Kravetz, Don

    1996-01-01

    Ensyn is a profitable commercial company which derives its revenues from the conversion of wood residues into liquid biofuel and chemicals. The technology, Rapid Thermal Processing (RTP (TM) )is based on extremely fast ''cracking'' of biomass which results in light liquid yields exceeding 70% by weight, from wood. Whether producing chemicals or liquid biofuel, the RTP plant is configured identically and operated essentially in the same mode. Chemicals production simply allows economical production to occur at a lower plant capacity, as low as 2 tonnes/day, than is feasible for a dedicated fuel plant (typically greater than 100 tonnes/day). Ensyn has developed the commercialisation of RTP TM from bench to industrial scale in 10 years. A variety of crative funding initiatives in the early years allowed for capital to be raised for R and D without the loss of intellectual property (IP). The transition years of technology demonstration, prior to full commercialisation, were funded by a blend of revenues from venture capital and public sources, and by quickly tapping into a niche market for RTP TM . The utilisation of the technology at the niche market scale opened the doors to the larger fuel and commodity markets. Once, again, both IP and control of the company were maintained during these years. Flexibility, creativity and expertise are necessary to understand the significance of various financing options (private investments, commercial banking and bond issues) and to integrate these options with various renewable energy, recycling and tax incentives. Understanding these options with various renewable energy, recycling and tax incentives is necessary. Understanding both the core and peripheral needs of the customer are essential in successfully advancing a commercial wood energy venture. Ensyn's experience in these areas is the focus of the paper. (Author)

  4. Protection of Wood from Microorganisms by Laccase-Catalyzed Iodination

    Science.gov (United States)

    Engel, J.; Thöny-Meyer, L.; Schwarze, F. W. M. R.; Ihssen, J.

    2012-01-01

    In the present work, Norway spruce wood (Picea abies L.) was reacted with a commercial Trametes versicolor laccase in the presence of potassium iodide salt or the phenolic compounds thymol and isoeugenol to impart an antimicrobial property to the wood surface. In order to assess the efficacy of the wood treatment, a leaching of the iodinated and polymerized wood and two biotests including bacteria, a yeast, blue stain fungi, and wood decay fungi were performed. After laccase-catalyzed oxidation of the phenols, the antimicrobial effect was significantly reduced. In contrast, the enzymatic oxidation of iodide (I−) to iodine (I2) in the presence of wood led to an enhanced resistance of the wood surface against all microorganisms, even after exposure to leaching. The efficiency of the enzymatic wood iodination was comparable to that of a chemical wood preservative, VP 7/260a. The modification of the lignocellulose by the laccase-catalyzed iodination was assessed by the Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) technique. The intensities of the selected lignin-associated bands and carbohydrate reference bands were analyzed, and the results indicated a structural change in the lignin matrix. The results suggest that the laccase-catalyzed iodination of the wood surface presents an efficient and ecofriendly method for wood protection. PMID:22865075

  5. Common wood decay fungi found in the Caribbean Basin

    Science.gov (United States)

    D. Jean. Lodge

    2016-01-01

    There are hundreds of wood-decay fungi in the Caribbean Basin, but relatively few of these are likely to grow on manmade structures built of wood or wood-composites. The wood-decay fungi of greatest concern are those that cause brown-rot, and especially brown-rot fungi that are resistant to copper-based wood preservatives. Some fungi that grow in the Caribbean and...

  6. Wood construction codes issues in the United States

    Science.gov (United States)

    Douglas R. Rammer

    2006-01-01

    The current wood construction codes find their origin in the 1935 Wood Handbook: Wood as an Engineering Material published by the USDA Forest Service. Many of the current design recommendations can be traced back to statements from this book. Since this time a series of development both historical and recent has led to a multi-layered system for use of wood products in...

  7. 29 CFR 1910.25 - Portable wood ladders.

    Science.gov (United States)

    2010-07-01

    ... for the construction, care, and use of the common types of portable wood ladders, in order to insure... density wood shall not be used. (ii) [Reserved] (2) [Reserved] (c) Construction requirements. (1... 29 Labor 5 2010-07-01 2010-07-01 false Portable wood ladders. 1910.25 Section 1910.25 Labor...

  8. 21 CFR 178.3800 - Preservatives for wood.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Preservatives for wood. 178.3800 Section 178.3800... Certain Adjuvants and Production Aids § 178.3800 Preservatives for wood. Preservatives may be safely used... to accomplish the technical effect of protecting the wood from decay, mildew, and water absorption...

  9. 30 CFR 77.1913 - Fire-resistant wood.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fire-resistant wood. 77.1913 Section 77.1913 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... Shaft Sinking § 77.1913 Fire-resistant wood. Except for crossties, timbers, and other wood products...

  10. Wood-hoopoes: are Phoeniculus purpureus niloticus (Neumann ...

    African Journals Online (AJOL)

    The Green Wood-hoopoe Phoeniculus purpureus (Miller 1784) is represented in all savanna regions of Africa, and has long been the subject of debate (Turner 2014). In addition, birds referred to as the Violet Wood-hoopoe (damarensis and granti) and. Black-billed Wood-hoopoe (somaliensis) appear very closely related to ...

  11. Okanagan indoor wood burning appliance inventory survey

    International Nuclear Information System (INIS)

    2001-01-01

    A survey was conducted to determine the usage and nature of wood burning appliances used by residents in British Columbia's Okanagan region. The objective was to better understand this source of air quality concern and to facilitate strategic planning, guidelines and legislation. The survey also provides a baseline to track the effectiveness of any reduction strategies. It identifies the different types of wood burning appliances used in the community and presents residential options about potential bylaws to protect air quality. The receptivity of households to switch to more efficient wood burning appliances was also examined. The survey completes a portion of an overall emissions inventory for the Okanagan Valley. Environment Canada uses the particulate loading results to model the air quality in the airshed. Results showed that approximately 21 per cent of the households in the Okanagan use indoor wood burning appliances, and burn an average of 2.3 cords of wood each year. Only 11 per cent of the appliances are considered to have advanced burning technology. It is projected that the use of wood burning appliances in the Okanagan will increase by 5 to 7 per cent in the next 2 years. Most residents have good burning habits, but some improvements can still be made. Many residents are considering exchanging old wood burning appliances for clean burning technology appliances for environmental and health reasons. Most households would support a bylaw to control nuisance amounts of smoke from wood burning appliances. 20 tabs., 5 figs

  12. Wood phenology, not carbon input, controls the interannual variability of wood growth in a temperate oak forest.

    Science.gov (United States)

    Delpierre, Nicolas; Berveiller, Daniel; Granda, Elena; Dufrêne, Eric

    2016-04-01

    Although the analysis of flux data has increased our understanding of the interannual variability of carbon inputs into forest ecosystems, we still know little about the determinants of wood growth. Here, we aimed to identify which drivers control the interannual variability of wood growth in a mesic temperate deciduous forest. We analysed a 9-yr time series of carbon fluxes and aboveground wood growth (AWG), reconstructed at a weekly time-scale through the combination of dendrometer and wood density data. Carbon inputs and AWG anomalies appeared to be uncorrelated from the seasonal to interannual scales. More than 90% of the interannual variability of AWG was explained by a combination of the growth intensity during a first 'critical period' of the wood growing season, occurring close to the seasonal maximum, and the timing of the first summer growth halt. Both atmospheric and soil water stress exerted a strong control on the interannual variability of AWG at the study site, despite its mesic conditions, whilst not affecting carbon inputs. Carbon sink activity, not carbon inputs, determined the interannual variations in wood growth at the study site. Our results provide a functional understanding of the dependence of radial growth on precipitation observed in dendrological studies. © 2015 The Authors. New Phytologist © 2015 New Phytologist Trust.

  13. Integrated production of wood fuel and pulp wood from young stands; Integroitujen tuotantomenetelmien vertailu

    Energy Technology Data Exchange (ETDEWEB)

    Korpilahti, A [Metsaeteho Oy, Helsinki (Finland)

    1997-12-01

    The aim of the study was to clarify the competitiveness of different harvesting chains and processing methods of first thinning wood. Great expectations have been laid on integrated production of wood fuel and pulp wood. Results produced in other bioenergy projects were taken into account, and in this project some field experiments on mechanised felling-bunching and compressing of the load of tree sections during forwarding were carried out. The new processing methods, the MASSAHAKE-method and chain-flail delimbing combined with small-scale drum debarking, still are under development giving a rather unstable data for comparisons. Both in pine and birch dominant stands modern multiple tree logging gave the most favourable results when ranking on the bases of the price of pulp chips. Integrated methods were not very far and they have more potential than methods based on harvesting delimbed short wood. When compared on the bases of the production cost of pulp, integrated methods were in general the most favourable because they give good subsidies on the form of bioenergy. (orig.)

  14. How deep-sea wood falls sustain chemosynthetic life.

    Directory of Open Access Journals (Sweden)

    Christina Bienhold

    Full Text Available Large organic food falls to the deep sea--such as whale carcasses and wood logs--are known to serve as stepping stones for the dispersal of highly adapted chemosynthetic organisms inhabiting hot vents and cold seeps. Here we investigated the biogeochemical and microbiological processes leading to the development of sulfidic niches by deploying wood colonization experiments at a depth of 1690 m in the Eastern Mediterranean for one year. Wood-boring bivalves of the genus Xylophaga played a key role in the degradation of the wood logs, facilitating the development of anoxic zones and anaerobic microbial processes such as sulfate reduction. Fauna and bacteria associated with the wood included types reported from other deep-sea habitats including chemosynthetic ecosystems, confirming the potential role of large organic food falls as biodiversity hot spots and stepping stones for vent and seep communities. Specific bacterial communities developed on and around the wood falls within one year and were distinct from freshly submerged wood and background sediments. These included sulfate-reducing and cellulolytic bacterial taxa, which are likely to play an important role in the utilization of wood by chemosynthetic life and other deep-sea animals.

  15. How Deep-Sea Wood Falls Sustain Chemosynthetic Life

    Science.gov (United States)

    Bienhold, Christina; Pop Ristova, Petra; Wenzhöfer, Frank; Dittmar, Thorsten; Boetius, Antje

    2013-01-01

    Large organic food falls to the deep sea – such as whale carcasses and wood logs – are known to serve as stepping stones for the dispersal of highly adapted chemosynthetic organisms inhabiting hot vents and cold seeps. Here we investigated the biogeochemical and microbiological processes leading to the development of sulfidic niches by deploying wood colonization experiments at a depth of 1690 m in the Eastern Mediterranean for one year. Wood-boring bivalves of the genus Xylophaga played a key role in the degradation of the wood logs, facilitating the development of anoxic zones and anaerobic microbial processes such as sulfate reduction. Fauna and bacteria associated with the wood included types reported from other deep-sea habitats including chemosynthetic ecosystems, confirming the potential role of large organic food falls as biodiversity hot spots and stepping stones for vent and seep communities. Specific bacterial communities developed on and around the wood falls within one year and were distinct from freshly submerged wood and background sediments. These included sulfate-reducing and cellulolytic bacterial taxa, which are likely to play an important role in the utilization of wood by chemosynthetic life and other deep-sea animals. PMID:23301092

  16. RESISTANCE TO THE ATTACK OF DRY-WOOD TERMITES (Cryptotermes brevis OF SIX WOOD SPECIES

    Directory of Open Access Journals (Sweden)

    Fabrício Gomes Gonçalves

    2006-03-01

    Full Text Available The dry wood termites are one of the largest causes of damages in wood used in Brazil. This work analyzed the attackof the Cryptotermes brevis in six commercials wood species in the north of the Rio de Janeiro and south of the Espírito Santo. The testobserved the number of holes, the percentage of died individuals and the damage of the pieces. When compared to the Pinus sp(reference, the species with less susceptibility to the attack were Cedrela fissilis, Cariocar brasiliense and Goupia glabra, that alsopresented the largest percentages of mortality of termites. The Schizolobium parahyba, Toona ciliata and the Tachigalia myrmecophyllawere the species with the highest level of damage.

  17. Applicability of Vegetable Oils as a Wood Preservative

    Directory of Open Access Journals (Sweden)

    Eylem Dizman Tomak

    2012-04-01

    Full Text Available Conventional heavy duty wood preservatives have been banned or restricted for some applications due to their mammalian toxicity and their adverse effect on the environment. New, eco-friendly, but nevertheless still effective protection systems, is needed to protect wood in outdoors. Non-toxic vegetable oils can form of a protective layer on the surface of the wood cells which decrease water uptake of wood. For that reason, oils have a good potential as being a wood preservative. However, impregnation with vegetable oils is insufficient to impart adequate biological decay and termite resistance, and indeed the treatment may increase wood’s propensity to burn. In addition, a high level of oil absorption required for good protection make the process impractical and uneconomic to use. The efficiency of the treatment can be improved with using the biocides and oils together. Beside this, usage of modified oils can decrease the retention levels in wood. In this study, applicability of vegetable oils being one of the environment-friendly, biodegradable water repellents on wood treatments was reported. Furthermore, problems related to the use of oils for wood protection, and possible solutions for the problems were discussed.In this study, applicability of vegetable oils as one of the environment-friendly, biodegradable water repellents was reported. Furthermore, problems related to the use of oils for wood protection and possible solutions for the problems were discussed

  18. The wood of Merovingian weaponry

    Czech Academy of Sciences Publication Activity Database

    Tegel, W.; Muigg, B.; Büntgen, Ulf

    2016-01-01

    Roč. 65, JAN (2016), s. 148-153 ISSN 0305-4403 R&D Projects: GA MŠk(CZ) EE2.3.20.0248 Institutional support: RVO:67179843 Keywords : Early Middle Ages * Merovingian weaponry * Mineralised wood * Wood anatomy Subject RIV: EH - Ecology, Behaviour Impact factor: 2.602, year: 2016

  19. Wood waste: A disposal problem or an opportunity?

    International Nuclear Information System (INIS)

    Vajda, P.

    1989-01-01

    The utilization of wood wastes in North America is reviewed, with a focus on the wood products industry and markets. On the whole, wood mill residues in North America have always been utilized except for a period from the 1940s to the 1970s oil crisis. In the latter period, low cost electric power and hydrocarbon fuels rendered uneconomical the use of wood wastes as fuel. As a response to the problem of disposing these wastes, a number of innovations occurred in that period, including the use of wood chips for manufacturing pulp and particleboard, and the use of sawdust and shavings for manufacturing hardboard and medium density fiberboard. Uses for bark, except as fuel, have not been successfully developed. Since the 1970s, wood waste in the USA is essentially all used for composite board products and fuel. This is also true in eastern Canada, which is close to the wood products markets and which has fairly high oil and gas costs. However, in western Canada, low energy costs and small internal markets have led to a serious wood waste disposal problem. A survey of wood waste supply and demand shows large surpluses in mill residues in western Canada and some remote locations in northern Ontario and Quebec. The Pacific Rim countries are identified as a potential market for western Canadian composite board production. The use of other sources of wood waste (forestry or logging residues, which are costly to collect, and municipal construction waste) is briefly discussed

  20. Wood for energy production. Technology - environment - economy

    International Nuclear Information System (INIS)

    Serup, H.; Falster, H.; Gamborg, C.

    1999-01-01

    'Wood for Energy Production', 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named 'Wood Chips for Energy Production'. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. 'Wood for Energy Production' is also available in German and Danish. (au)

  1. Wood for energy production. Technology - environment - economy

    Energy Technology Data Exchange (ETDEWEB)

    Serup, H.; Falster, H.; Gamborg, C. [and others

    1999-10-01

    `Wood for Energy Production`, 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named `Wood Chips for Energy Production`. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. `Wood for Energy Production` is also available in German and Danish. (au)

  2. Wood-burning appliances and indoor air quality

    Energy Technology Data Exchange (ETDEWEB)

    Levesque, Benoit; Allaire, Sylvain; Gauvin, Denis; Gingras, Suzanne; Rhainds, Marc; Prud' Homme, Henri; Duchesne, Jean-Francois [CHUQ-Centre de Recherche du CHUL, Unite de Recherche en Sante Publique, 2400, d' Estimauville, Beauport, G1E 7G9 Quebec (Canada); Koutrakis, Petros [Harvard School of Public Health, 677 Huntington Avenue, Boston, MA 02115 (United States)

    2001-12-17

    Wood heating represents an interesting economic alternative to electrical or heating oil and gas systems. However, many people are concerned about poor indoor air quality in homes equipped with wood-burning appliances. We conducted a study in the Quebec City region (Canada) to verify the extent of indoor air contamination, and to examine the frequency of respiratory symptoms and illnesses among occupants of wood-heated homes. One child attending primary school (median=8 years old; range=5-14 years old) and an adult (median=37 years old; range=23-52 years old) were recruited in each eligible house. Eligible houses were without known sources of combustion products (smokers, attached garage, oil or gas furnace, gas stove, etc.) except for wood-burning appliance. Out of the 89 houses included in the study, 59 had wood-burning appliances. Formaldehyde, nitrogen dioxide, respirable particles (PM10) and carbon monoxide were measured in a sub-set of 49 houses (41 with a wood-burning appliance and 8 without). The frequency of respiratory symptoms and diseases among participants were documented using a daily symptom diary. Concentrations of contaminants were low in most houses, both with or without a wood-burning appliance. Globally, there was no consistent relationship between the presence of a wood-burning appliance and respiratory morbidity in residents. Nevertheless, residents who mentioned being exposed to fumes emitted by such an appliance reported more respiratory illnesses and symptoms. The presence of animals or molds, and keeping windows closed most of the time in winter were other factors associated with respiratory problems. We conclude that wood burning appears to be a respiratory health risk for occupants if the appliance is not maintained and used properly.

  3. The use of wood waste for energy production

    International Nuclear Information System (INIS)

    Karlopoulos, E.; Pavloudakis, F.

    1999-01-01

    The paper presents some technical aspects and management issues of wood waste reuse end disposal. It refers to the Greek and European legislation which determines the framework for rational and environmental friendly practices for woos waste management. It refers also to the wood waste classification systems and the currently applied methods of wood waste disposal and reuse. Emphasis is given to the wood waste-to-energy conversion system, particularly to the pretreatment requirements, the combustion techniques, and the environmental constrains. Finally, the decision making process for the investments in the wood waste firing thermal units is discussed

  4. The potential of wood-based composite poles

    Science.gov (United States)

    Todd F. Shupe; Cheng Piao; Chung Y. Hse

    2009-01-01

    Wood-based composite utility poles are receiving increasing attention in the North American pole market. This interest is being driven by many increasing factors such as increasing: (1) disposal costs of solid wood poles, (2) liability and environmental concerns with traditional means of disposal of solid wood poles, (3) cost and concerns of long-term...

  5. Structural condition assessment of in-service wood

    Science.gov (United States)

    Robert J. Ross; Brian K. Brashaw; Xiping Wang

    2006-01-01

    Wood is used extensively for both interior and exterior applications in the construction of a variety of structures (residential, agricultural, commercial, government, religious). The deterioration of an in-service wood member may result from a variety of causes during the life of a structure. It is important, therefore, to periodically assess the condition of wood...

  6. Insect-mediated nitrogen dynamics in decomposing wood

    Science.gov (United States)

    Michael D. Ulyshen

    2015-01-01

    1.Wood decomposition is characterised by complex and poorly understood nitrogen (N) dynamics with unclear implications for forest nutrient cycling and productivity.Wood-dwelling microbes have developed unique strategies for coping with the N limitations imposed by their substrate, including the translocation of N into wood by cord-forming fungi and the fixation of...

  7. Effects of phosphoramides on wood dimensional stability

    Science.gov (United States)

    Hong-Lin. Lee; George C. Chen; Roger M. Rowell

    2000-01-01

    To evaluate the dimensional stability of phosphoramide-reacted wood, wood was reacted with a mixture which was derived from compounding phosphorus pentoxide and each of 12 amines including alkyl, halophenyl, and phenyl amines in N,N-dimethylformamide. Dimensional stability of such reacted wood was analyzed by antishrink efficiency (ASE) using the water-soak method....

  8. Engineering Biodegradable Flame Retardant Wood-Plastic Composites

    Science.gov (United States)

    Zhang, Linxi

    Wood-plastic composites (WPCs), which are produced by blending wood and polymer materials, have attracted increasing attentions in market and industry due to the low cost and excellent performance. In this research, we have successfully engineered WPC by melt blending Polylactic Acid (PLA) and Poly(butylene adipate-co-terphthalate) (PBAT) with recycled wood flour. The thermal property and flammability of the composite are significantly improved by introducing flame retardant agent resorcinol bis(biphenyl phosphate) (RDP). The mechanical and morphological properties are also investigated via multiple techniques. The results show that wood material has increased toughness and impact resistance of the PLA/PBAT polymer matrix. SEM images have confirmed that PLA and PBAT are immiscible, but the incompatibility is reduced by the addition of wood. RDP is initially dispersed in the blends evenly. It migrates to the surface of the sample after flame application, and serves as a barrier between the fire and underlying polymers and wood mixture. It is well proved in the research that RDP is an efficient flame retardant agent in the WPC system.

  9. Wood fuels sources and markets

    International Nuclear Information System (INIS)

    Koopmans, Auke

    2003-01-01

    Biomass energy is an important source of energy in most Asian countries. Households and industries use substantial amounts of fuel wood, charcoal and other biomass energy, such as agricultural residues, dung, leaves and sawmill residues. The main household applications are cooking and heating whereas industrial applications range widely. This paper provides an overview of estimates on the production and trade of biomass fuels in the South-east Asia region. The flows and channels used in the supply of wood fuels in different countries were analysed. This paper may help in identifying policy gaps with regards to the supply and consumption of wood fuels from both forest and non-forest sources. (Author)

  10. Aquatic wood -- an insect perspective

    Science.gov (United States)

    Peter S. Cranston; Brendan McKie

    2006-01-01

    Immersed wood provides refugia and substrate for a diverse array of macroinvertebrates, and food for a more restricted genuinely xylophagous fauna. Worldwide, xylophages are found across aquatic insect orders, including Coleoptera, Diptera, Trichoptera and Plecoptera. Xylophages often are specialised, feeding on the wood surface or mining deep within. Many feed...

  11. Turbulence and Araki-Woods factors

    DEFF Research Database (Denmark)

    Sasyk, R.; Törnquist, A.; Törnquist, Asger Dag

    2010-01-01

    Using Baire category techniques we prove that Araki-Woods factors are not classifiable by countable structures. As a result, we obtain a far reaching strengthening as well as a new proof of the well-known theorem of Woods that the isomorphism problem for ITPFI factors is not smooth. We derive...

  12. Researches regarding the influence of the weather on the flight of the white storks (Ciconia ciconia in the spring migration across the Doamnei River hydrographical basin (Argeş county, Romania

    Directory of Open Access Journals (Sweden)

    Adrian MESTECĂNEANU

    2011-05-01

    Full Text Available The authors show a preliminary study regarding the influence of the weather on the flight (soaring, gliding and flapping flight of the white storks (Ciconia ciconia in the spring migration across the Doamnei River hydrographical basin. The research is based on 289 observations and 3153 individuals observed during 1998 – 2010. The lapse of time, the temperature of the air, the atmospheric nebulosity, the type of clouds, and the wind intensity were considered. We stated that the presence of the ascendant air played a major role in the migratory flight, this rising air being used by birds in their economical flight that combine the soaring flight and the gliding one.

  13. Wood-burning stoves worldwide

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo

    global environmental health risk, since these sources are important contributors to fine particulate matter (PM2.5) in the ambient air that increase climate and health risks. This thesis explores the social-technical dimensions of both the use of wood-burning stoves (WBSs) and transition to the use......More than any time in our history, the wood-burning stove continues to be the most popular technology used for cooking and heating worldwide. According to the World Health Organization and recent scientific studies, the inefficient use of solid-fuels in traditional stoves constitutes the major...... systems, improved efficient retrofits and advanced stove innovations. In chapter 3, four popular wood-burning practices found in five countries were singled-out to be examined closely in four case studies: “cooking in Brazil”, “cooking and heating in Peru”, “heating in Portugal” and “recreational heat...

  14. Wood-plastic composites utilizing wood flours derived from fast- growing trees common to the midwest

    Science.gov (United States)

    There are several non- or under-utilized hardwood trees common to the Midwestern states. Wood flour (WF) derived from fast-growing Midwest trees (Osage orange, Black Locust and Red Mulberry) were evaluated as a source of bio-based fiber reinforcements. Wood plastic composites (WPC) of high density p...

  15. Determination of pectin content of eucalyptus wood

    NARCIS (Netherlands)

    Coetzee, B.; Schols, H.A.; Wolfaardt, F.

    2011-01-01

    Very little is known about the occurrence of pectin in wood and it is speculated that between 10 mg g-1 and 40 mg g-1 of wood consists of pectin. The present study aimed to quantify pectin in eucalyptus wood and to determine the influence of tree species, yield potential of the site, tree age class

  16. Advances and challenges of wood polymer composites

    Science.gov (United States)

    Roger M. Rowell

    2006-01-01

    Wood flour and fiber have been blended with thermoplastic such as polyethylene, polypropylene, polylactic acid and polyvinyl chloride to form wood plastic composites (WPC). WPCs have seen a large growth in the United States in recent years mainly in the residential decking market with the removal of CCA treated wood decking from residential markets. While there are...

  17. Build Green: Wood Can Last for Centuries

    Science.gov (United States)

    Carol A. Clausen; Samuel V. Glass

    2012-01-01

    This report updates and revises information from the 1976 Forest Service publication by Rodney C. DeGroot, “Your Wood Can Last for Centuries.” It explains why wood decays, alerts the homeowner to conditions that can result in decay in buildings, and describes measures to prevent moisture-related damage to wood.

  18. Characteristics and availability of commercially important woods

    Science.gov (United States)

    Regis B. Miller

    1999-01-01

    Throughout history, the unique characteristics and comparative abundance of wood have made it a natural material for homes and other structures, furniture, tools, vehicles, and decorative objects. Today, for the same reasons, wood is prized for a multitude of uses. All wood is composed of cellulose, lignin, hemicelluloses, and minor amounts (5% to 10%) of extraneous...

  19. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)

    User

    2011-04-19

    Apr 19, 2011 ... be waste product from saw mills, wood working plants or produced from selected dry wood by .... Stop watch-used to indicate the exact time the mould has remained in the press before wood .... There is abundance of saw dust the source of which is the ... Madison, Wisconsin: Wiley Interscience. Usoro, H. S. ...

  20. Low-NO{sub x}, wood chip combustion

    Energy Technology Data Exchange (ETDEWEB)

    Saastamoinen, J.; Oravainen, H.; Haemaelaeinen, J.; Paakkinen, K. [VTT Energy, Jyvaeskylae (Finland)

    1997-10-01

    The regulations for nitrogen oxide emissions vary in different countries, but the general trend in the future will probably be that the emissions limits will be lowered also for wood combustion plants, which are small or medium size units. Thus, the development of wood chip burning furnaces (grate furnaces, fluidized bed combustors, stoker furnaces) with lower nitrogen oxide emissions, is important. The wood used in the combustor, its particle size, moisture and fuel properties (nitrogen content) affect the nitrogen emissions. The nitrogen oxide release is also much affected by the design and operation of the combustor (air staging, fuel air preheat, flue gas circulation, air to fuel mass ratio). The fate of nitrogen compounds originally in the virgin wood depends much on the design of the combustor system and by proper planning it is possible to reduce the emission of nitrogen oxides. Basic knowledge of the release of nitrogen compounds from single wood particles is attained. The release of gaseous nitrogen compounds from wood particles during pyrolysis and combustion is studied experimentally and by modelling. Nitrogen release is studied experimentally by two ways, by analysing the gas and by quenching the particle and analysing the char residue. Formation of nitrogen oxide emissions in a fuel bed is studied by modelling and by combustion experiments with a pot furnace. This research gives general information of nitrogen oxide formation in wood bunting especially in fixed beds. The development of a horizontal stoker burner for wood chips with low emissions is the practical aim of the research. (orig.)

  1. Violates stem wood burning sustainable development?

    DEFF Research Database (Denmark)

    Czeskleba-Dupont, Rolf

    2008-01-01

    friendly effects of substituting wood burning for fossil fuels. With reference to Bent Sørensen's classical work on 'Renewable Energy' the assumption of CO2-neutrality regarding incineration is problematised when applied to plants with long rotation periods as trees. Registered CO2-emissions from wood...... burning are characterised together with particle and PAH emissions. The positive treatment of wood stove-technology in the Danish strategy for sustainable development (draft 2007) is critically evaluated and approaches to better regulation are identified....

  2. Mechanics of the Compression Wood Response: II. On the Location, Action, and Distribution of Compression Wood Formation.

    Science.gov (United States)

    Archer, R R; Wilson, B F

    1973-04-01

    A new method for simulation of cross-sectional growth provided detailed information on the location of normal wood and compression wood increments in two tilted white pine (Pinus strobus L.) leaders. These data were combined with data on stiffness, slope, and curvature changes over a 16-week period to make the mechanical analysis. The location of compression wood changed from the under side to a flank side and then to the upper side of the leader as the geotropic stimulus decreased, owing to compression wood action. Its location shifted back to a flank side when the direction of movement of the leader reversed. A model for this action, based on elongation strains, was developed and predicted the observed curvature changes with elongation strains of 0.3 to 0.5%, or a maximal compressive stress of 60 to 300 kilograms per square centimeter. After tilting, new wood formation was distributed so as to maintain consistent strain levels along the leaders in bending under gravitational loads. The computed effective elastic moduli were about the same for the two leaders throughout the season.

  3. Broad Anatomical Variation within a Narrow Wood Density Range—A Study of Twig Wood across 69 Australian Angiosperms

    Science.gov (United States)

    Ziemińska, Kasia; Westoby, Mark; Wright, Ian J.

    2015-01-01

    Objectives Just as people with the same weight can have different body builds, woods with the same wood density can have different anatomies. Here, our aim was to assess the magnitude of anatomical variation within a restricted range of wood density and explore its potential ecological implications. Methods Twig wood of 69 angiosperm tree and shrub species was analyzed. Species were selected so that wood density varied within a relatively narrow range (0.38–0.62 g cm-3). Anatomical traits quantified included wood tissue fractions (fibres, axial parenchyma, ray parenchyma, vessels, and conduits with maximum lumen diameter below 15 μm), vessel properties, and pith area. To search for potential ecological correlates of anatomical variation the species were sampled across rainfall and temperature contrasts, and several other ecologically-relevant traits were measured (plant height, leaf area to sapwood area ratio, and modulus of elasticity). Results Despite the limited range in wood density, substantial anatomical variation was observed. Total parenchyma fraction varied from 0.12 to 0.66 and fibre fraction from 0.20 to 0.74, and these two traits were strongly inversely correlated (r = -0.86, P area to sapwood area ratio, and modulus of elasticity (0.24 ≤|r|≤ 0.41, P area to sapwood area ratio (0.47 ≤|r|≤ 0.65, all P area spectrum. The fibre-parenchyma spectrum does not yet have any clear or convincing ecological interpretation. PMID:25906320

  4. Broad Anatomical Variation within a Narrow Wood Density Range--A Study of Twig Wood across 69 Australian Angiosperms.

    Science.gov (United States)

    Ziemińska, Kasia; Westoby, Mark; Wright, Ian J

    2015-01-01

    Just as people with the same weight can have different body builds, woods with the same wood density can have different anatomies. Here, our aim was to assess the magnitude of anatomical variation within a restricted range of wood density and explore its potential ecological implications. Twig wood of 69 angiosperm tree and shrub species was analyzed. Species were selected so that wood density varied within a relatively narrow range (0.38-0.62 g cm-3). Anatomical traits quantified included wood tissue fractions (fibres, axial parenchyma, ray parenchyma, vessels, and conduits with maximum lumen diameter below 15 μm), vessel properties, and pith area. To search for potential ecological correlates of anatomical variation the species were sampled across rainfall and temperature contrasts, and several other ecologically-relevant traits were measured (plant height, leaf area to sapwood area ratio, and modulus of elasticity). Despite the limited range in wood density, substantial anatomical variation was observed. Total parenchyma fraction varied from 0.12 to 0.66 and fibre fraction from 0.20 to 0.74, and these two traits were strongly inversely correlated (r = -0.86, P area to sapwood area ratio, and modulus of elasticity (0.24 ≤|r|≤ 0.41, P area to sapwood area ratio (0.47 ≤|r|≤ 0.65, all P area spectrum. The fibre-parenchyma spectrum does not yet have any clear or convincing ecological interpretation.

  5. Cytochemical localization of cellulases in decayed and nondecayed wood

    Energy Technology Data Exchange (ETDEWEB)

    Murmanis, L.; Highley, T.L.; Palmer, J.G.

    1987-01-01

    Sawdust from undecayed western hemlock wood and from wood previously decayed by the brown-rot fungus Poria placenta or by the white-rot fungus Ganoderma applanatum was incubated with commercial cellulase from Trichoderma viride. Samples were treated cytochemically to locate cellulase activity and examined by TEM. Results showed that cellulase degraded undecayed wood extensively, with the attack starting on the outer border of a cell wall and progressing inside. Wood decayed by P. placenta, with or without cellulase incubation, and treated by the cytochemical test showed uniform distribution of electron dense particles throughout the cell walls. In wood decayed by G. applanatum, cellulase degradation was similar to that in undecayed wood. From measurements of particle diameter it is suggested that electron dense particles are cellulase. It is concluded that brown-rot and white-rot fungi have different effects on the microstructure of wood. The brown-rot fungus appears to open the wood microstructure so that cellulase can diffuse throughout the degraded tracheid wall.

  6. Feasibility of biodegradation of pentachlorophenol in scrap wood

    International Nuclear Information System (INIS)

    Beaulieu, G.; Besner, A.; Gilbert, R.; Tetreault, P.; Beaudet, R.; Bisaillon, J. G.; Lepine, F.; Ottou, J. M.; Sansregret, J. L.; Lei, J.

    1998-04-01

    The feasibility of biological treatment of scrap wood impregnated in pentachlorophenol (PCP) was investigated using wood samples impregnated with PCP for biodegradation experiments by the Hydro-Quebec Research Institute (IREQ). IREQ identified the necessity of pre-treating the wood, first by shredding wood poles into wood shavings, followed by mechanical milling of the shavings to obtain wood dust. Biodegradation experiments under anaerobic conditions were performed by the Armand-Frappier Institute by isolating a consortium of bacteria from a mixture of PCP-contaminated soils and a municipal anaerobic sludge that was able to degrade PCP under anaerobic methanogenic conditions at 29 degrees C. A complementary source of carbon was found to be necessary for the bacterial consortium to degrade the PCP. The best PCP degradation results were obtained with an aerobic fixed-film reactor. Aerobic biodegradation tests were performed on liquor extracted from wood dust contaminated with PCP. The anaerobic fixed field reactor was able to completely degrade the PCP extracted from wood dust in less than one day. Aerobic biodegradation was also investigated using microorganisms and fungi. Over a four month experimental period only low concentrations of PCP were found in effluents treated with the aerobic cultures. 117 refs., 38 tabs., 31 figs

  7. Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene

    Science.gov (United States)

    Alex Wiedenhoeft

    2006-01-01

    Wood can be found at crime scenes in many forms: as a murder weapon, as material used to hide a body, or as trace evidence from forced entry or vandalism. In the course of my work at the Forest Products Laboratory, Center for Wood Anatomy Research, I have been part of several forensic investigations that were adversely affected by inappropriate procedures used to...

  8. Wood preservation

    Science.gov (United States)

    Kevin Archer; Stan Lebow

    2006-01-01

    Wood preservation can be interpreted to mean protection from fire, chemical degradation, mechanical wear, weathering, as well as biological attack. In this chapter, the term preservation is applied more restrictively to protection from biological hazards.

  9. Three Construction Projects with Wood Scraps

    Science.gov (United States)

    Levine, Elizabeth

    1977-01-01

    Wood, a natural material, appeals to children of all ages. Wood construction allows children the flexibility of moving parts of their work around until they are satisfied with the arrangement. Three projects are described. (Author/RK)

  10. Effect of wood flour content on the optical color, surface chemistry, mechanical and morphological properties of wood flour/recycled high density polyethylene (rHDPE) composite

    Science.gov (United States)

    Sheng, Chan Kok; Amin, Khairul Anuar Mat; Kee, Kwa Bee; Hassan, Mohd Faiz; Ali, E. Ghapur E.

    2018-05-01

    In this study, effect of wood flour content on the color, surface chemistry, mechanical properties and surface morphology of wood-plastic composite (WPC) on different mixture ratios of recycled high density polyethylene (rHDPE) and wood flour were investigated in detail. The presence of wood flour in the composite indicates a significant total color change and a decrease of lightness. Functional groups of wood flour in WPC can be seen clearer from the Fourier transform infrared (FTIR) spectra as the wood flour content increases. The mechanical tensile testing shows that the tensile strength of Young's modulus is improved, whereas the strain and elongation at break were reduced by the addition of wood flour. The gap between the wood flour microvoid fibre and rHDPE matrix becomes closer when the wood flour content is increased as observed by scanning electron microscope (SEM) image. This finding implies a significant improvement on the interaction of interfacial adhesion between the rHDPE matrix and wood flour filler in the present WPC.

  11. Wood energy markets, 2011-2012

    Science.gov (United States)

    Francisco Aguilar; Rens Hartkamp; Warren Mabee; Kenneth Skog

    2012-01-01

    To celebrate the 2012 International Year of Sustainable Energy for All, in this chapter we consider in some depth the sustainability of wood energy. To do so, we evaluate the traditional economic, environmental and social dimensions of the sustainability concept. We also address how public policy has influenced wood energy sustainability across the UNECE region.

  12. Composites from wood and plastics

    Science.gov (United States)

    Craig Clemons

    2010-01-01

    Composites made from thermoplastics and fillers or reinforcements derived from wood or other natural fibers are a dynamic research area encompassing a wide variety of composite materials. For example, as the use of biopolymers grows, wood and other natural fiber sources are being investigated as renewable sources of fillers and reinforcements to modify performance....

  13. Public opinion and wood energy

    Science.gov (United States)

    Sarah Hitchner; John Schelhas; Teppo Hujala; J. Peter Brosius

    2014-01-01

    As wood-based bioenergy continues to develop around the world, it will utilize forestlands in new ways and will have different effects on a number of stakeholders, including forest landowners, local communities, extant industries, policymakers, investors, and others. As more stakeholders become involved in the wood energy web, and as the general public becomes more...

  14. Inventory of contaminants in waste wood; Inventering av foeroreningar i returtrae

    Energy Technology Data Exchange (ETDEWEB)

    Jermer, Joeran; Ekvall, Annika; Tullin, Claes [Swedish National Testing and Research Inst., Boraas (Sweden)

    2001-03-01

    Waste wood is increasingly used as fuel in Sweden. It is of Swedish origin as well as imported, mainly from Germany and the Netherlands. The waste wood is contaminated by e.g. paint and wood preservatives and objects of metal, glass, plastics etc. The contaminants may cause technical problems such as deposits and corrosion as well as plugging of air openings. The present study has focussed on potential contaminants in waste wood that could cause problems of technical as well as environmental nature. The major chemical contaminants are surface treatments (paints etc) and wood preservatives. The surface treatments contribute in particular to contaminants of zinc and lead. In some cases zinc has been found to cause severe deposits in the furnaces. Surface treatments also contribute to increased levels of sodium, chlorine, sulphur and nitrogen. Preservative-treated wood is the most important source of increased levels of copper, chromium and arsenic in the waste wood. Waste wood imported from Germany contains less arsenic but the same amount of copper and chromium as Swedish waste wood. The contents of mercury in German waste wood can be expected to be higher than in waste wood of Swedish origin. The fraction consisting of wood-based panels is comparably free from contaminants but as a result of the high contents of adhesives wood-based panels contribute to a higher proportion of nitrogen in waste wood than in forest residues. A great number of non-wood compounds (such as plastics and metals) do also contaminate waste wood. By careful and selective demolition and various sorting procedures most non-wood compounds will be separated from the waste wood. Waste sorting analyses carried out indicate that the waste wood contains approximately 1% non-wood compounds, mainly plastic and metal compounds, glass, dirt, concrete, bricks and gypsum. This may seem to be a small proportion, but if large amounts of waste wood are incinerated the non-wood compounds will inevitably cause

  15. 49 CFR 178.515 - Standards for reconstituted wood boxes.

    Science.gov (United States)

    2010-10-01

    ... wood boxes. (a) The identification code for a reconstituted wood box is 4F. (b) Construction requirements for reconstituted wood boxes are as follows: (1) The walls of boxes must be made of water... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for reconstituted wood boxes. 178.515...

  16. Acetylation of wood components and fourier transform infra-red ...

    African Journals Online (AJOL)

    In this study, the reactivity of wood components with acetic anhydride or vinyl acetate was studied. It was found that the reactivity of wood components was virgin wood flour > holocellulose >> a-cellulose. Acetylation of Turkish pine or cedar wood flour with acetic anhydride was significantly improved in the presence of ...

  17. A predictive model to inform adaptive management of double-crested cormorants and fisheries in Michigan

    Science.gov (United States)

    Tsehaye, Iyob; Jones, Michael L.; Irwin, Brian J.; Fielder, David G.; Breck, James E.; Luukkonen, David R.

    2015-01-01

    The proliferation of double-crested cormorants (DCCOs; Phalacrocorax auritus) in North America has raised concerns over their potential negative impacts on game, cultured and forage fishes, island and terrestrial resources, and other colonial water birds, leading to increased public demands to reduce their abundance. By combining fish surplus production and bird functional feeding response models, we developed a deterministic predictive model representing bird–fish interactions to inform an adaptive management process for the control of DCCOs in multiple colonies in Michigan. Comparisons of model predictions with observations of changes in DCCO numbers under management measures implemented from 2004 to 2012 suggested that our relatively simple model was able to accurately reconstruct past DCCO population dynamics. These comparisons helped discriminate among alternative parameterizations of demographic processes that were poorly known, especially site fidelity. Using sensitivity analysis, we also identified remaining critical uncertainties (mainly in the spatial distributions of fish vs. DCCO feeding areas) that can be used to prioritize future research and monitoring needs. Model forecasts suggested that continuation of existing control efforts would be sufficient to achieve long-term DCCO control targets in Michigan and that DCCO control may be necessary to achieve management goals for some DCCO-impacted fisheries in the state. Finally, our model can be extended by accounting for parametric or ecological uncertainty and including more complex assumptions on DCCO–fish interactions as part of the adaptive management process.

  18. Study of radiation-destroyed wood

    International Nuclear Information System (INIS)

    Klimentov, A.S.; Shakhanova, R.K.; Stepanova, I.N.; Vysotskaya, I.F.

    1986-01-01

    The change in carbohydrate composition of aspen wood exposed to electron beam radiation (0.5 MeV, dose rates of 0-0.56 MGy) is studied. It has been found that the water-soluble polysaccharide content grows from 0.47 up to 8.54 %, and that of the non-hydrolyzed polysaccharides decreases from 49.4 down to 36.1 %. The polysaccharide total content of aspen wood goes down from 61.28 to 56.82 % with the radiation dose increasing. Consequently, the xylose, arabinose, and ramnose percentage of wood hydrolyzates increases correspondingly from 11.9 up to 15.44, from 0.66 up to 0.90, and from 0.21 up to 0.38

  19. Wood anatomy of Argyroxiphium (Asteraceae): adaptive radiation and ecological correlations

    International Nuclear Information System (INIS)

    Carlquist, S.

    1997-01-01

    Wood anatomy shows close correlation with ecology: A. kauense, A. sandwicense (stem), and A. virescens, which occur in dry localities, show xeromorphic wood patterns. The most mesomorphic woods are those of the bog species A. grayanum and root wood of A. sandwicense. The wood of A. caliginis is xeromorphic, despite the bog habitat of the species, a fact explainable if A. caliginis is a recent entrant into the bog habitat Libriform wall thickness appears correlated with habit. Quantitative features of stem woods of Argyroxiphium are comparable to woods ranging from desert to moist montane forest areas in California. The similarities to woods from each Californian habitat are correlative to the relative moisture availability of the respective Hawaiian habitats of the Argyroxiphium species. (author)

  20. Introducing wood pellet fuel to the UK

    Energy Technology Data Exchange (ETDEWEB)

    Cotton, R A; Giffard, A

    2001-07-01

    Technical and non-technical issues affecting the introduction of wood pellet-fired heating to the UK were investigated with the aim of helping to establish a wood pellet industry in the UK. The project examined the growth and status of the industry in continental Europe and North America, reviewed relevant UK standards and legislation, identified markets for pellet heating in the UK, organised workshops and seminars to demonstrate pellet burning appliances, carried out a trial pelletisation of a range of biomass fuels, helped to set up demonstration installations of pellet-fired appliances, undertook a promotional campaign for wood pellet fuel and compiled resource directories for pellet fuel and pellet burning appliances in the UK. The work was completed in three phases - review, identification and commercialisation. Project outputs include UK voluntary standards for wood pellet fuel and combustion appliances, and a database of individuals with an interest in wood pellet fuel.

  1. X-ray measurements on wood - spectra measurements

    DEFF Research Database (Denmark)

    Jensen, Signe Kamp; Thygesen, Lisbeth Garbrecht; Gerward, Leif

    The report concerns simultaneous non-destructive measurements of water content and density of wood. Theoretically, this should be possible using a x-ray equipment newly build at BKM, and this work is an attempt to use the equipment for assessing water content and density of wood samples under...... laboratory conditions. A number of wood samples with different densities are placed at different relative humidities from 0.5 to 97 %RH. When equilibrium is obtained the samples are measured with the x-ray equipment such that 10 points are measured in the sample followed by measurements outside the sample...... (free-scanning). In this way 100 points are measured for each wood sample. This produces information about moisture content and density of the samples as water and wood attenuations of the x-rays are different for the different energy levels contained in the x-rays. The "real" density and moisture...

  2. Acidity of selected industrial wood species in Serbia

    Directory of Open Access Journals (Sweden)

    Popović Mlađan

    2016-01-01

    Full Text Available The acidity of wood has an important role in many areas of wood applications. Hence, this paper presents a study on the acidity of beech, fir and poplar, as the representatives of the most industrially utilized wood species in Serbia. The contents of both the soluble and insoluble acids were determined through the extraction methods with cold distilled water and sodium acetate solution, respectively, followed by the titration with sodium hydroxide solution. The acidity strongly differs among the three wood species used in this research. The amount of insoluble acids was the highest in fir, almost twice as much than in poplar, and about 68 % higher than in fir wood species. Such differences also showed a strong correlation with the gel times of UF adhesive mixes with hot water extracts. [Projekat Ministarstva nauke Republike Srbije, br. TP 31041: Establishment of Wood Plantations Intended for Afforestation of Serbia

  3. Wood versus quality of the air?

    International Nuclear Information System (INIS)

    Richard, A.

    2015-01-01

    CITEPA has estimated at 875000 tonnes the releases of fine particles in France in 2014. Wood heating is responsible for 1/3 of the release of PM10 particles (particles with a diameter lower than 10 μm) and for half of the release of PM2.5 particles. PM2.5 particles are particles whose diameter is lower than 2.5 μm, they are more dangerous than PM10 particles because they enter the lungs more deeply. In 2012 the World Health Organisation acknowledged fine particles as responsible for lung cancers. The other contributors are industry (20 to 30%) and transport (16%). The uncertainties on the figures are important and can reach 50% as the estimations are based on extrapolations but wood heating appears to be the major polluter. The solution is to promote the installation of new wood heating systems that release far less particles. Open fireplaces and closed fireplaces installed before 2002 release respectively 97 and 91 kg of fine particles a year while closed fireplaces installed after 2007 release only 8 kg a year and the latest closed systems only 3 kg a year. In some mountainous regions like Haute-Savoie where wood heating is a tradition, local authorities give financial helps to individuals to install efficient systems. Community wood heating and industrial wood boilers have been equipped with efficient filters since the first Grenelle law on the environment took effect and their releases of fine particles have dropped sharply. (A.C.)

  4. The sustainable wood production initiative.

    Science.gov (United States)

    Robert. Deal

    2004-01-01

    To address concerns about sustainable forestry in the region, the Focused Science Delivery Program is sponsoring a three year Sustainable Wood Production Initiative. The Pacific Northwest is one of the world's major timber producing regions, and the ability of this region to produce wood on a sustained yield basis is widely recognized. Concerns relating to the...

  5. Holistic approach to wood protection

    Science.gov (United States)

    Roger M. Rowell

    2006-01-01

    When untreated wood is exposed to adverse outdoor conditions, nature has a series of chemistries to degrade it to its original building blocks of carbon dioxide and water. Fungi, termites, heat, moisture, ultraviolet (UV) energy, and chemicals take their toll on the performance properties of wood. We tend to study each of these degradation chemistries as individual...

  6. Assessing potential sustainable wood yield

    Science.gov (United States)

    Robert F. Powers

    2001-01-01

    Society is making unprecedented demands on world forests to produce and sustain many values. Chief among them is wood supply, and concerns are rising globally about the ability of forests to meet increasing needs. Assessing this is not easy. It requires a basic understanding of the principles governing forest productivity: how wood yield varies with tree and stand...

  7. Measuring wood specific gravity, correctly

    Science.gov (United States)

    G. Bruce Williamson; Michael C. Wiemann

    2010-01-01

    The specific gravity (SG) of wood is a measure of the amount of structural material a tree species allocates to support and strength. In recent years, wood specific gravity, traditionally a forester’s variable, has become the domain of ecologists exploring the universality of plant functional traits and conservationists estimating global carbon stocks. While these...

  8. Functional lignocellulosic materials prepared by ATRP from a wood scaffold

    Science.gov (United States)

    Cabane, Etienne; Keplinger, Tobias; Künniger, Tina; Merk, Vivian; Burgert, Ingo

    2016-01-01

    Wood, a natural and abundant source of organic polymers, has been used as a scaffold to develop novel wood-polymer hybrid materials. Through a two-step surface-initiated Atom Transfer Radical Polymerization (ATRP), the porous wood structure can be effectively modified with polymer chains of various nature. In the present study, polystyrene and poly(N-isopropylacrylamide) were used. As shown with various characterization techniques including confocal Raman microscopy, FTIR, and SEM/EDX, the native wood ultrastructure and features are retained and the polymer chains can be introduced deep within the wood, i.e. inside the wood cell walls. The physical properties of the new materials have been studied, and results indicate that the insertion of polymer chains inside the wood cell wall alters the intrinsic properties of wood to yield a hybrid composite material with new functionalities. This approach to the functionalization of wood could lead to the fabrication of a new class of interesting functional materials and promote innovative utilizations of the renewable resource wood. PMID:27506369

  9. Wood Composite Adhesives

    Science.gov (United States)

    Gomez-Bueso, Jose; Haupt, Robert

    The global environment, in which phenolic resins are being used for wood composite manufacture, has changed significantly during the last decade. This chapter reviews trends that are driving the use and consumption of phenolic resins around the world. The review begins with recent data on volume usage and regional trends, followed by an analysis of factors affecting global markets. In a section on environmental factors, the impact of recent formaldehyde emission regulations is discussed. The section on economics introduces wood composite production as it relates to the available adhesive systems, with special emphasis on the technical requirement to improve phenolic reactivity. Advances in composite process technology are introduced, especially in regard to the increased demands the improvements place upon adhesive system performance. The specific requirements for the various wood composite families are considered in the context of adhesive performance needs. The results of research into current chemistries are discussed, with a review of recent findings regarding the mechanisms of phenolic condensation and acceleration. Also, the work regarding alternate natural materials, such as carbohydrates, lignins, tannins, and proteinaceous materials, is presented. Finally, new developments in alternative adhesive technologies are reported.

  10. Emissions from wood domestic heating appliances

    International Nuclear Information System (INIS)

    Collet, S.

    2009-01-01

    Much research has been carried out to study emissions from wood domestic heating appliances. This work reviews the available emission factors about pollutants produced in different types of wood domestic heating appliances. The main sources of pollutants are older stoves that in most cases are used as an additional heating appliance. These stoves causes higher emissions than modern appliances. Then, substitution of an old type wood appliance with a modern appliance or boiler or a pellet boilers, would reduce considerably emissions in this sector. The efficiency of this measure is estimated for each pollutant. (author)

  11. Sunken wood habitat for thiotrophic symbiosis in mangrove swamps.

    Science.gov (United States)

    Laurent, Mélina C Z; Gros, Olivier; Brulport, Jean-Pierre; Gaill, Françoise; Bris, Nadine Le

    2009-03-01

    Large organic falls to the benthic environment, such as dead wood or whale bones, harbour organisms relying on sulfide-oxidizing symbionts. Nothing is known however, concerning sulfide enrichment at the wood surface and its relation to wood colonization by sulfide-oxidizing symbiotic organisms. In this study we combined in situ hydrogen sulfide and pH measurements on sunken wood, with associated fauna microscopy analyses in a tropical mangrove swamp. This shallow environment is known to harbour thiotrophic symbioses and is also abundantly supplied with sunken wood. A significant sulfide enrichment at the wood surface was revealed. A 72h sequence of measurements emphasized the wide fluctuation of sulfide levels (0.1->100muM) over time with both a tidal influence and rapid fluctuations. Protozoans observed on the wood surface were similar to Zoothamnium niveum and to vorticellids. Our SEM observations revealed their association with ectosymbiotic bacteria, which are likely to be sulfide-oxidizers. These results support the idea that sunken wood surfaces constitute an environment suitable for sulfide-oxidizing symbioses.

  12. Pretreatment Characteristics of Waste Oak Wood by Ammonia Percolation

    Science.gov (United States)

    Kim, Jun-Seok; Kim, Hyunjoon; Lee, Jin-Suk; Lee, Joon-Pyo; Park, Soon-Chul

    A log of waste oak wood collected from a Korean mushroom farm has been tested for ammonia percolation pretreatment. The waste log has different physical characteristics from that of virgin oak wood. The density of the waste wood was 30% lower than that of virgin oak wood. However, there is little difference in the chemical compositions between the woods. Due to the difference in physical characteristics, the optimal pretreatment conditions were also quite different. While for waste oak the optimum temperature was determined to be 130°C, for virgin oak wood the optimum pretreatment was only achieved at 170°C. Presoaking for 12 h with ammonia solution before pretreatment was helpful to increase the delignification efficiency.

  13. Delineating pMDI model reactions with loblolly pine via solution-state NMR spectroscopy. Part 1, Catalyzed reactions with wood models and wood polymers

    Science.gov (United States)

    Daniel J. Yelle; John Ralph; Charles R. Frihart

    2011-01-01

    To better understand adhesive interactions with wood, reactions between model compounds of wood and a model compound of polymeric methylene diphenyl diisocyanate (pMDI) were characterized by solution-state NMR spectroscopy. For comparison, finely ground loblolly pine sapwood, milled-wood lignin and holocellulose from the same wood were isolated and derivatized with...

  14. Wood

    Science.gov (United States)

    David W. Green; Robert H. White; Antoni TenWolde; William Simpson; Joseph Murphy; Robert J. Ross; Roland Hernandez; Stan T. Lebow

    2006-01-01

    Wood is a naturally formed organic material consisting essentially of elongated tubular elements called cells arranged in a parallel manner for the most part. These cells vary in dimensions and wall thickness with position in the tree, age, conditions of growth, and kind of tree. The walls of the cells are formed principally of chain molecules of cellulose, polymerized...

  15. Wood chemistry symposium: from muka to lignin

    Energy Technology Data Exchange (ETDEWEB)

    MacLeod, M.

    1979-01-01

    The Canadian Wood Chemistry Symposium held during September, 1979, is reviewed. The chemical and physical explanations of delignification were debated. Problems of mechanical pulping include insufficient brightness, yellowing, and low strength relative to energy consumption. A session on chemicals, energy, and food from wood began with criteria for a viable project, which included adequate return on investment, modest capital investment requirements, identified pre-existing markets, and favorable thermodynamic balances. The pulp and paper industry should improve its methods of using bark and wood waste in direct combustion (by pre-drying wastes and improving furnace efficiency) rather than supporting oil-from-wood projects, since using a waste for fuel will free fossil fuels for uses in synthetic fibers and thermoplastics. In the area of food, there are modest successes with cellulose fiber additives to bread and snack food and single cell protein (which, though made from wastes, cannot compete with soy protein). However, making monomeric sugars from wood polysaccharides is not an efficient process, and muka, animal feed supplement from foliage, is successful only in Russia. In Canada it cannot compete with agricultural products. Alpha cellulose is a major wood chemical product. Promising uses include cellulose derived thermoplastics and lignosulphonates for secondary oil recovery. Instead of breaking wood polysaccharides and lignin into monomers and then repolymerizing them, it is possible to use the pre-built polymers; such an approach is illustrated by use of lignin in polyurethane foams, adhesives, and coatings.

  16. Water sorption in wood and modified wood at high values of relative humidity

    DEFF Research Database (Denmark)

    Thygesen, Lisbeth Garbrecht; Engelund, Emil Tang; Hoffmeyer, Preben

    2010-01-01

    additional results corroborate this conclusion: (1) calculation of the theoretical contribution of capillary condensation to the moisture content (MC) in wood based on idealized microstructural geometries by means of the Kelvin and Laplace equations resulted in very small contributions to the equilibrium...... moisture content (EMC), i.e., below 0.35% moisture at 99.9% RH. (2) The ratio between the EMC of acetylated and untreated samples did not show an increasing trend for increasing RH, as would have been the case if capillary condensation had taken place in both untreated and acetylated wood. (3) Low field......, and the pressure plate technique. The curve form for the untreated samples did not show an upward bend, except perhaps above 99.5% RH, indicating that – contrary to what has hitherto been assumed – capillary condensation does not play a significant role for water sorption in wood below fiber saturation. Three...

  17. COMPOSITES FROM RECYCLED WOOD AND PLASTICS

    Science.gov (United States)

    The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. Two processing technologies were used to prepare wood-plastic composites: air-laying and melt...

  18. DNA Damage among Wood Workers Assessed with the Comet Assay

    Science.gov (United States)

    Bruschweiler, Evin Danisman; Wild, Pascal; Huynh, Cong Khanh; Savova-Bianchi, Dessislava; Danuser, Brigitta; Hopf, Nancy B.

    2016-01-01

    Exposure to wood dust, a human carcinogen, is common in wood-related industries, and millions of workers are occupationally exposed to wood dust worldwide. The comet assay is a rapid, simple, and sensitive method for determining DNA damage. The objective of this study was to investigate the DNA damage associated with occupational exposure to wood dust using the comet assay (peripheral blood samples) among nonsmoking wood workers (n = 31, furniture and construction workers) and controls (n = 19). DNA damage was greater in the group exposed to composite wood products compared to the group exposed to natural woods and controls (P < 0.001). No difference in DNA damage was observed between workers exposed to natural woods and controls (P = 0.13). Duration of exposure and current dust concentrations had no effect on DNA damage. In future studies, workers’ exposures should include cumulative dust concentrations and exposures originating from the binders used in composite wood products. PMID:27398027

  19. Multipass comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    Science.gov (United States)

    Dooley, James H; Lanning, David N

    2014-05-27

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction one or more times through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel.

  20. Health effects assessment of exposure to particles from wood smoke

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Elsa; Dybdahl, M [Technical Univ. of Denmark, National Food Institute, Dept. of Toxicology and Risk Assessment, Soeborg (Denmark); Larsen, Poul Bo [Danish Environmental Protection Agency, Copenhagen (Denmark)

    2008-07-01

    The number of residential wood burning devices has increased in Denmark during the latest years and it has been estimated that there in 2005 were about 551,000 wood stoves and about 48,000 wood boilers in Denmark. This has resulted in an increased exposure of the general Danish population to pollutants associated with residential wood smoke. New Danish monitoring results on particulate matter (PM) in ambient air have shown elevated PM levels in areas with many wood stoves, particularly during wintertime when wood burning is common. Due to the size distribution of wood smoke particles essentially all will be contained in the PM{sub 2.5} fraction. It has been estimated that about 17,665 tonnes PM{sub 2.5} per year (2005) in Denmark come from residential wood combustion. Therefore, there is an increasing concern that adverse human health effects might be associated with the increased exposure to residential wood smoke. This project has been set up in order to review the scientific literature concerning adverse health effects of pollutants associated with residential wood smoke with the main focus on particulate matter and to quantify and evaluate, if possible, the impact on human health of the increased exposure to particles in residential wood smoke. (au)

  1. 7 CFR 160.9 - Destructively distilled wood turpentine.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Destructively distilled wood turpentine. 160.9 Section... REGULATIONS AND STANDARDS FOR NAVAL STORES General § 160.9 Destructively distilled wood turpentine. The designation “destructively distilled wood turpentine” shall refer to the kind of spirits of turpentine...

  2. Surface properties of thermally treated composite wood panels

    Science.gov (United States)

    Croitoru, Catalin; Spirchez, Cosmin; Lunguleasa, Aurel; Cristea, Daniel; Roata, Ionut Claudiu; Pop, Mihai Alin; Bedo, Tibor; Stanciu, Elena Manuela; Pascu, Alexandru

    2018-04-01

    Composite finger-jointed spruce and oak wood panels have been thermally treated under standard pressure and oxygen content conditions at two different temperatures, 180 °C and respectively 200 °C for short time periods (3 and 5 h). Due to the thermally-aided chemical restructuration of the wood components, a decrease in water uptake and volumetric swelling values with up to 45% for spruce and 35% for oak have been registered, comparing to the reference samples. In relation to water resistance, a 15% increase of the dispersive component of the surface energy has been registered for the thermal-treated spruce panels, which impedes water spreading on the surface. The thermal-treated wood presents superior resistance to accelerated UV exposure and subsequently, with up to 10% higher Brinell hardness values than reference wood. The proposed thermal treatment improves the durability of the finger-jointed wood through a more economically and environmental friendly method than traditional impregnation, with minimal degradative impact on the structural components of wood.

  3. Proceedings of the 8. biennial residual wood conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This conference highlighted practical strategies for managing and utilizing residual wood as a true industry resource. Examples of successful wood energy projects were presented along with the technology and products of more than 30 companies involved in the residual wood business. The topics of discussion ranged from biomass supplies, quality issues, and harvesting guidelines to emerging biomass technologies, project overviews, and financing. The presentations outlined the many opportunities that exist for the forest industry to produce energy from biostock, such as healthy and diseased trees, underbrush, sawdust, wood chips, wood pulp and black liquor. Increasing fuel and energy costs along with advances in technology are improving the economy of forest-based biorefineries. The presentations showed how the industry can gain revenue from residual wood, which is steadily becoming a more valuable resource for pellet production and energy generation The conference featured 20 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  4. Remarks on orthotropic elastic models applied to wood

    Directory of Open Access Journals (Sweden)

    Nilson Tadeu Mascia

    2006-09-01

    Full Text Available Wood is generally considered an anisotropic material. In terms of engineering elastic models, wood is usually treated as an orthotropic material. This paper presents an analysis of two principal anisotropic elastic models that are usually applied to wood. The first one, the linear orthotropic model, where the material axes L (Longitudinal, R( radial and T(tangential are coincident with the Cartesian axes (x, y, z, is more accepted as wood elastic model. The other one, the cylindrical orthotropic model is more adequate of the growth caracteristics of wood but more mathematically complex to be adopted in practical terms. Specifically due to its importance in wood elastic parameters, this paper deals with the fiber orientation influence in these models through adequate transformation of coordinates. As a final result, some examples of the linear model, which show the variation of elastic moduli, i.e., Young´s modulus and shear modulus, with fiber orientation are presented.

  5. Enhanced wood fuel handling: market and design studies

    Energy Technology Data Exchange (ETDEWEB)

    Landen, R.; Rippengal, R.; Redman, A.N.

    1997-09-01

    This report examines the potential for the manufacture and sale of novel wood fuel handling systems as a means of addressing users' concerns regarding current capital costs and potential high labour costs of non-automated systems. The report considers fuel handling technology that is basically appropriate for wood-fired heating systems of between c.100kW and c.1MW maximum continuous rating. This report details work done by the project collaborators in order to: (1) assess the current status of wood fuel handling technology; (2) evaluate the market appetite for improved wood fuel handling technology; (3) derive capital costs which are acceptable to customers; (4) review design options; and (5) select one or more design options worthy of further development. The current status of wood fuel handling technology is determined, and some basic modelling to give guidance on acceptable capital costs of 100-1000kW wood fuel handling systems is undertaken. (author)

  6. Reactivity and burnout of wood fuels

    Energy Technology Data Exchange (ETDEWEB)

    Dall' Ora, M.

    2011-07-01

    This thesis deals with the combustion of wood in pulverised fuel power plants. In this type of boiler, the slowest step in the wood conversion process is char combustion, which is one of the factors that not only determine the degree of fuel burnout, but also affect the heat release profile in the boiler and thereby the overall operation and efficiency of the plant. Chapter 1 consists of an introduction to thermal conversion of biomass fuels as well as a description of a Danish power plant where a measuring campaign was carried out as part of this project. Chapter 2 is a brief literature review of different aspects relevant to wood combustion, including wood structure and composition, wood pyrolysis, wood char properties and wood char oxidation. The full scale campaign, which is the subject of Chapter 3, included sampling of wood fuel before and after milling and sampling of gas and particles at the top of the combustion chamber. The collected samples and data are used to obtain an evaluation of the mills in operation at the power plant, the particle size distribution of the wood fuel, as well as the char conversion attained in the furnace. In Chapter 4 an experimental investigation on the relation between pyrolysis of wood in boiler-like conditions and wood char properties is presented. Chars from pine and beech wood were produced by fast pyrolysis in an entrained flow reactor and by slow pyrolysis in a thermogravimetric analyser. The influence of pyrolysis temperature, heating rate and particle size on char yield and morphology was investigated. The applied pyrolysis temperature varied in the range 673-1673 K for slow pyrolysis and 1073-1573 K for fast pyrolysis. The chars were oxidised in a thermogravimetric analyser and the mass loss data were used to determine char oxidation reactivity. Char yield from fast pyrolysis (104-105 K/s) was as low as 1-6% on a dry ash free basis, whereas it was about 15-17% for slow pyrolysis (10-20 K/min); char yield decreased as

  7. Life cycle inventory of manufacturing prefinished engineered wood flooring in eastern U.S. with comparison to solid strip wood flooring

    Science.gov (United States)

    Richard D. Bergman; Scott A. Bowe

    2011-01-01

    Building products have come under increased scrutiny because of environmental impacts from their manufacture. Our study followed the life cycle inventory approach for prefinished engineered wood flooring in the eastern US and compared the results with those of solid strip wood flooring. Our study surveyed five engineered wood flooring manufacturers in the eastern US....

  8. Wood-fired electricity generation in Eastern Ontario

    Energy Technology Data Exchange (ETDEWEB)

    1978-07-01

    The feasibility of using large areas of currently unproductive rural land in Ontario for poplar plantations which would supply fuel for wood-fired power plants was examined. Information is included on the productive potential of such poplar plantations, the technology of wood-fired steam-electric plants, costs of wood and water supplies, location of plants, cost of power generation, and socio-economic effects. It was concluded that approximately 1.7 million acres of unused land are available which could produce 7 to 10 million tons of wood fuel per year which in turn could be converted to 1600 MW/yr over the next 10 yr. No adverse environmental effects are expected. The project would economically benefit an area of high unemployment. It is recommended that a more detailed feasibility study be undertaken to establish land availability and acquisition, cost of power generation in wood-fired plants, and the economic impact of such a project. (LCL)

  9. Climate effects of wood used for bioenergy

    Energy Technology Data Exchange (ETDEWEB)

    Ros, Jan P.M.; Van Minnen, Jelle G. [Netherlands Environmental Assessment Agency PBL, Bilthoven (Netherlands); Arets, Eric J.M.M. [Alterra, Wageningen University WUR, Wageningen (Netherlands)

    2013-08-15

    Wood growth and natural decay both take time, and this is an important aspect of sustainability assessments of wood used for energy. Wood taken from forests is a carbon-neutral energy source in the long term, but there are many examples of potential sources of wood used for bioenergy for which net emission reductions are not achieved in 10 to 40 years - the time frame for most climate policy mitigation targets. This is caused by two factors. The first factor relates to the fact that the carbon cycles of wood have a long time span. After final felling, CO2 fixation rates are initially relatively low, but increase again as forests regrow. This regrowth takes many years, sometimes more than a century. Wood residues can either be used or left in the forest. By using them, the emissions from the otherwise decaying residues (taking 2 to 30 years) would be avoided. The second factor concerns the fact that, if the wood is used for bioenergy, then fossil energy emissions are being avoided. However, the direct emission levels from bioenergy are higher than those related to the fossil energy it replaces. These additional emissions also have to be compensated. The carbon debt caused by both factors has to be paid back first, before actual emission reductions can be realised. For wood residues (from harvesting or thinning) that are used to replace coal or oil products, these payback times are relatively short, of the order of 5 to 25 years, mainly depending on location and type of residue (longer if they replace gas). This is also the case when using wood from salvage logging. In most cases, when using wood from final felling directly for energy production, payback times could be many decades to more than a century, with substantial increases in net CO2 emissions, in the meantime. This is especially the case for many forests in Europe, because they are currently an effective carbon sink. Additional felling reduces average growth rates in these forests and thus the sequestration

  10. Effects of wood smoke particles from wood-burning stoves on the respiratory health of atopic humans

    Directory of Open Access Journals (Sweden)

    Riddervold Ingunn

    2012-04-01

    Full Text Available Abstract Background There is growing evidence that particulate air pollution derived from wood stoves causes acute inflammation in the respiratory system, increases the incidence of asthma and other allergic diseases, and increases respiratory morbidity and mortality. The objective of this study was to evaluate acute respiratory effects from short-term wood smoke exposure in humans. Twenty non-smoking atopic volunteers with normal lung function and without bronchial responsiveness were monitored during three different experimental exposure sessions, aiming at particle concentrations of about 200 μg/m3, 400 μg/m3, and clean air as control exposure. A balanced cross-over design was used and participants were randomly allocated to exposure orders. Particles were generated in a wood-burning facility and added to a full-scale climate chamber where the participants were exposed for 3 hours under controlled environmental conditions. Health effects were evaluated in relation to: peak expiratory flow (PEF, forced expiratory volume in the first second (FEV1, and forced vital capacity (FVC. Furthermore, the effects were assessed in relation to changes in nasal patency and from markers of airway inflammation: fractional exhaled nitric oxide (FENO, exhaled breath condensate (EBC and nasal lavage (NAL samples were collected before, and at various intervals after exposure. Results No statistically significant effect of wood smoke exposure was found for lung function, for FENO, for NAL or for the nasal patency. Limited signs of airway inflammation were found in EBC. Conclusion In conclusion, short term exposure with wood smoke at a concentration normally found in a residential area with a high density of burning wood stoves causes only mild inflammatory response.

  11. 75 FR 79019 - Multilayered Wood Flooring From China

    Science.gov (United States)

    2010-12-17

    ...)] Multilayered Wood Flooring From China Determinations On the basis of the record \\1\\ developed in the subject... imports from China of multilayered wood flooring, provided for in subheadings 4409.10, 4409.29, 4412.31... multilayered wood flooring. The following companies are members of the CAHP: Anderson Hardwood Floors, LLC...

  12. Wood Permeability in Eucalyptus grandis and Eucalyptus dunnii

    Directory of Open Access Journals (Sweden)

    Raphael Nogueira Rezende

    2017-12-01

    Full Text Available ABSTRACT The objective of this study was to evaluate the flow of air and water in Eucalyptus grandis and Eucalyptus dunnii wood. Wood was collected from four trees aged 37 years in an experimental plantation of the Federal University of Lavras, Brazil. Planks were cut off the basal logs to produce specimens for air and water permeability testing. Results indicated that the longitudinal permeability to air and water of E. grandis wood were, on average, 5% and 10% higher, respectively, than that of E. dunnii wood. E. grandis and E. dunnii wood showed neither air nor water flow in the test for permeability transversal to the fibers, and longitudinal permeability to air exceeded that to water by approximately 50 fold in both species.

  13. Moisture-driven fracture in solid wood

    DEFF Research Database (Denmark)

    Larsen, Finn; Ormarsson, Sigurdur; Olesen, John Forbes

    2011-01-01

    Moisture-induced fractures in solid timber create considerable problems for both building industries and sawmills. Cracks caused by kiln-drying of solid timber are extremely difficult to predict. This paper reports on experiments concerned with methods of reducing cracks in wood and with the crac......Moisture-induced fractures in solid timber create considerable problems for both building industries and sawmills. Cracks caused by kiln-drying of solid timber are extremely difficult to predict. This paper reports on experiments concerned with methods of reducing cracks in wood...... process, suggesting that sealing the ends of timber logs while in the green moisture state could considerably reduce the development of end-cracks. The initial moisture content and the shrinkage properties of the wood varied markedly from pith to bark. The importance of taking material inhomogeneities...... into account when modelling crack propagation in solid wood is emphasized. © 2011 Taylor & Francis....

  14. URBAN WOOD/COAL CO-FIRING IN THE NIOSH BOILER PLANT

    Energy Technology Data Exchange (ETDEWEB)

    James T. Cobb Jr.

    2005-02-10

    Phase I of this project began by obtaining R&D variances for permits at the NIOSH boilerplant (NBP), Emery Tree Service (ETS) and the J. A. Rutter Company (JARC) for their portions of the project. Wood for the test burn was obtained from the JARC inventory (pallets), Thompson Properties and Seven D Corporation (construction wood), and the Arlington Heights Housing Project (demolition wood). The wood was ground at ETS and JARC, delivered to the Three Rivers Terminal and blended with coal. Three one-day tests using wood/coal blends of 33% wood by volume (both construction wood and demolition wood) were conducted at the NBP. Blends using hammermilled wood were operationally successful. Emissions of SO{sub 2} and NOx decreased and that of CO increased when compared with combusting coal alone. Mercury emissions were measured and evaluated. During the first year of Phase II the principal work focused upon searching for a replacement boilerplant and developing a commercial supply of demolition wood. The NBP withdrew from the project and a search began for another stoker boilerplant in Pennsylvania to replace it on the project. Three potential commercial demolition wood providers were contacted. Two were not be able to supply wood. At the end of the first year of Phase II, discussions were continuing with the third one, a commercial demolition wood provider from northern New Jersey. During the two-and-a-third years of the contract extension it was determined that the demolition wood from northern New Jersey was impractical for use in Pittsburgh, in another power plant in central New Jersey, and in a new wood gasifier being planned in Philadelphia. However, the project team did identify sufficient wood from other sources for the gasifier project. The Principal Investigator of this project assisted a feasibility study of wood gasification in Clarion County, Pennsylvania. As a result of the study, an independent power producer in the county has initiated a small wood

  15. Development of a residential wood smoke reduction plan in a wood burning community: A case study in Libby, Montana

    International Nuclear Information System (INIS)

    Fox, R.J.; Manderino, L.; Lyons, C.E.; Morris, A.L.; Anderson, R.L.

    1992-01-01

    Libby, Montana depends on wood as a heating fuel. Libby exceeded the 24-hour federal PM10 ambient air quality standard every year since monitoring began in 1987. Residential wood smoke significantly contributes to its air pollution. To decrease residential wood smoke's contribution to air pollution, residents have to modify their heating habits. County officials sponsored the development of a comprehensive community-oriented plan to reduce wood smoke. This paper describes how the plan was developed and the components of the air pollution reduction strategies. The plan was developed using community input and tailored to local conditions. Four specific strategies were developed to reduce residential wood smoke pollution. Development of strategies required analysis of home heating habits and potential alternatives. Economic conditions were also considered. Expensive control strategies would be worthless unless alternative funding methods were provided. Thus, the plan included an array of funding sources to facilitate implementation. The development and implementation techniques are applicable to other communities with similar air pollution challenges

  16. Comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    Science.gov (United States)

    Dooley, James H; Lanning, David N

    2013-08-13

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel, wherein the cutting discs have a uniform thickness (T.sub.D), and wherein at least one of L.sub.C, W.sub.C, and H.sub.C is greater than T.sub.D.

  17. Prediction of strength of wood composite materials using ultrasonic

    International Nuclear Information System (INIS)

    Mahmoud, M.K.; Emam, A.

    2005-01-01

    Wood is a biological material integrating a very large variability of its mechanical properties (tensile and compressive), on the two directional longitudinal and transverse Ultrasonic method has been utilized to measure both wood physical and / or wood mechanical properties. The aim of this article is to show the development of ultrasonic technique for quality evaluation of trees, wood material and wood based composites. For quality assessment of these products we discuss the nondestructive evaluation of different factors such as: moisture content, temperature, biological degradation induced by bacterial attack and fungal attack. These techniques were adapted for trees, timber and wood based composites. The present study discusses the prediction of tensile and compressive strength of wood composite materials using ultrasonic testing. Empirical relationships between the tensile properties, compression strength and ultrasonic were proposed. The experimental results indicate the possibility of establishing a relationship between tensile strength and compression values. Moreover, the fractures in tensile and compressive are discussed by photographic

  18. Functional relationships between wood structure and vulnerability to xylem cavitation in races of Eucalyptus globulus differing in wood density.

    Science.gov (United States)

    Barotto, Antonio José; Monteoliva, Silvia; Gyenge, Javier; Martinez-Meier, Alejandro; Fernandez, María Elena

    2018-02-01

    Wood density can be considered as a measure of the internal wood structure, and it is usually used as a proxy measure of other mechanical and functional traits. Eucalyptus is one of the most important commercial forestry genera worldwide, but the relationship between wood density and vulnerability to cavitation in this genus has been little studied. The analysis is hampered by, among other things, its anatomical complexity, so it becomes necessary to address more complex techniques and analyses to elucidate the way in which the different anatomical elements are functionally integrated. In this study, vulnerability to cavitation in two races of Eucalyptus globulus Labill. with different wood density was evaluated through Path analysis, a multivariate method that allows evaluation of descriptive models of causal relationship between variables. A model relating anatomical variables with wood properties and functional parameters was proposed and tested. We found significant differences in wood basic density and vulnerability to cavitation between races. The main exogenous variables predicting vulnerability to cavitation were vessel hydraulic diameter and fibre wall fraction. Fibre wall fraction showed a direct impact on wood basic density and the slope of vulnerability curve, and an indirect and negative effect over the pressure imposing 50% of conductivity loss (P50) through them. Hydraulic diameter showed a direct negative effect on P50, but an indirect and positive influence over this variable through wood density on one hand, and through maximum hydraulic conductivity (ks max) and slope on the other. Our results highlight the complexity of the relationship between xylem efficiency and safety in species with solitary vessels such as Eucalyptus spp., with no evident compromise at the intraspecific level. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  19. Global Wood Pellet Industry and Trade Study 2017

    NARCIS (Netherlands)

    Thrän, D.; Peetz, D.; Schaubach, K.; Mai-Moulin, T.; Junginger, H.M.; Lamers, P.; Visser, L.

    2017-01-01

    The report Global Wood Pellet Industry Market published in 2011 has always been the most downloaded document of IEA Bioenergy Task 40. We have decided to update the report and bring new insights on market trends and trade of the global wood pellets. The global wood pellet market has increased

  20. In situ polymerization of polyaniline in wood veneers.

    Science.gov (United States)

    Trey, Stacy; Jafarzadeh, Shadi; Johansson, Mats

    2012-03-01

    The present study describes the possibility to polymerize aniline within wood veneers to obtain a semi-conducting material with solid wood acting as the base template. It was determined that it is possible to synthesize the intrinsically conductive polymer (ICP) polyaniline in situ within the wood structure of Southern yellow pine veneers, combining the strength of the natural wood structure with the conductivity of the impregnated polymer. It was found that polyaniline is uniformly dispersed within the wood structure by light microscopy and FT-IR imaging. A weight percent gain in the range of 3-12 wt % was obtained with a preferential formation in the wood structure and cell wall, rather than in the lumen. The modified wood was found to be less hydrophilic with the addition of phosphate doped polyaniline as observed by equilibrium water swelling studies. While wood itself is insulating, the modified veneers had conductivities of 1 × 10(-4) to 1 × 10(-9) S cm(-1), demonstrating the ability to tune the conductivity and allowing for materials with a wide range of applications, from anti-static to charge-dispersing materials. Furthermore, the modified veneers had lower total and peak heat releases, as determined by cone calorimetry, because of the char properties of the ICP. This is of interest if these materials are to be used in building and furniture applications where flame retardance is of importance. © 2012 American Chemical Society