WorldWideScience

Sample records for wood household furniture

  1. Understanding perception of wood household furniture: application of a policy capturing approach

    Science.gov (United States)

    David Brinberg; Matthew Bumgardner; Kim Daniloski

    2007-01-01

    Consumer and retailer perceptions of wood household furniture were modeled using a policy capturing approach. A sample of consumers and retailers evaluated four pictures of wood furniture on eight visual cues deemed representative of the furniture purchasing environment. These cues were then regressed on respondents' judgment of willingness to pay for each...

  2. The wood household furniture and kitchen cabinet industries: a contrast in fortune

    Science.gov (United States)

    William G. Luppold; Matthew S. Bumgardner

    2009-01-01

    In 1977, the value of wood household furniture shipments from domestic manufacturers exceeded kitchen cabinet shipments by 170 percent; conversely, in 2006 shipments of cabinets exceeded shipments of furniture by 78 percent. The most apparent reason for the decrease in domestic furniture shipments is the increase in furniture imports, whereas cabinet demand has...

  3. Competitiveness of U.S. wood furniture manufacturers - Lessons learned from the softwood moulding industry

    Science.gov (United States)

    Al Schuler; Russ Taylor; Philip A. Araman

    2001-01-01

    The furniture industry in the United States has been losing market share to imports for the past two decades. This article focuses on the market segment where most of the loss has occurred: the important wood household (non-upholstered) sector (SIC code 2511). In the upholstered furniture sector, exports are still larger than imports. But the wood household furniture...

  4. Wood Identification of 18th Century Furniture. Interpreting Wood Naming Inventoires

    Directory of Open Access Journals (Sweden)

    Rocio Astrid BERNAL

    2011-09-01

    Full Text Available The 18th century Portuguese church furniture represents an extraordinary richness recognised worldwide, which demands safeguarding and valorisation. The identification of the wood of furniture artworks is the most important component for its comprehension and preservation. In this work wood anatomical characters of an 18th century Portuguese decorative furniture set from the Colegiada de São Martinho de Cedofeita, in Porto, were analysed to identify the woods used for manufacturing and to clarify their common names. Furthermore, the objectives were to recognise some of the criteria for choice of wood as well as the source of each wood. The woods identified from 16 fragments belong to Apuleia sp., Acacia sp., Neolamarckia sp. and Castanea sativa. Apuleia sp. and Acacia sp. woods most likely arrived from Brazil, while the Neolamarckia sp. woods likely arrived from India and the C. sativa woods from Portugal. The results are in accordance with the known Portuguese colonial sea routes of the 15th -18th centuries. Interestingly the terms found in the inventories can refer to finishing methods instead to the name of the woods, as for instance “oil wood” can refer to “oiled wood” or “linseed oiled wood”. The species choice may be related to the mechanical properties of the wood as well as the original tree size. Two large planks of Acacia sp. were used for the top of the “Portuguese arcaz”, and Apuleia sp. was found on main structural elements of this set of furniture, suggesting that wood colour was also important. Woods from Neolamarckia sp. and C. sativa, were also identified, being Castanea wood present only in the most recent pieces of the furniture set.

  5. CEFTA Agreement and Opportunities for Wood Furniture Export of the Republic of Macedonia

    OpenAIRE

    Ilijana Petrovska; Živka Meloska; Krum Efremov; Kiril Postolov

    2016-01-01

    This paper is focused on business possibilities of CEFTA 2006 and its influence on export trend of wood furniture from the Republic of Macedonia. First, six categories of wood furniture export are analyzed such as: office furniture, kitchen furniture, bedroom furniture, living and dining room furniture, shop furniture and other furniture, presenting a positive trend in each category, except for living and dining room furniture. The total export of wood furniture shows a positive trend. The se...

  6. Strategi Pemasaran Mebel Kayu Sentra Industri Kecil Pondok Bambu, Jakarta Timur (Wood Furniture Marketing Strategy on Pondok Bambu Small Industry Centre, East Jakarta

    Directory of Open Access Journals (Sweden)

    Yulius Hero

    2011-01-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Furniture is one of wood products to fulfill the household needs, especially for household furnishing. Wood product which is used for furniture tends to decrease because of the substitution products, i.e.: plastic, rattan, bamboo, glass, and metal. To continue their effort, small industries in Indonesia face hard problems and challanges. To solve the hard problems and challenges, then a new marketing strategy through the study on marketing strategy of small wood-furniture industry is needed. This research objectives are to know several factors which have relation toward marketing of woodfurniture and compile alternative small industrial marketing strategy of wood-furniture. Research conducts in Small Industry Centre, Pondok Bambu, East Jakarta from June to July 2008. Some tools are used in this research, such as: questionaire, calculator, camera, and stationery. The method of data collection is purposive sampling with total amount of responden is 30 people-small industry owners. Data analysis uses regression and SWOT method (Strength, Weaknesses. Opportunities, Threath. Result of the research for the regression equation of wood-furniture marketing Y= 9,001 - 0,6798 X1 - 1,4834 X2 - 1,4834 X3 + 0,4818 X4 with value R2 is equal to 51.3%. Linearity test model indicates that F Calculated is 6.57 in significat level α = 1%. Factors that influence wood-furniture marketing of sale volume are variation of product, wood-furniture price, distribution system and promotion. The relation between sale volume with variable of product variation, wood-furniture price, and distribution system is significant with negative direction. It means that smaller product variation, lower wood-furniture price, and more efficient distribution system; will effect to higher sale volume. Whereas the relation between sale volume with variable of promotion is not significant with positive direction. It

  7. FORMULATING ULTRA-LOW-VOC WOOD FURNITURE COATINGS

    Science.gov (United States)

    The article discusses the formulation of ultra-low volatile organic compound (VOC) wood furniture coatings. The annual U.S. market for wood coatings is about 240, 000 cu m (63 million gal). In this basis, between 57 and 91 million kg (125 and 200 million lb) of VOCs are emitted i...

  8. Utilization trend of wood species utilized in furniture industry in ...

    African Journals Online (AJOL)

    The utilization trend of four commonly used wood species and two lesser used wood species that are used for furniture making was examined. The wood species are Mansonia altissima (Mansonia), Khaya ivorensis (Khaya), Cordia millenii (Cordia) and Tectona grandis (Teak) as commonly used wood species; Aningeria ...

  9. How do retailers rate the United States and Canada as furniture sources compared to China?

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Mary Frye; Torsten Lihra

    2008-01-01

    During the past decade, the U.S. wood household furniture industry has lost a significant share of its domestic market to imported furniture. This market share loss has been widely discussed and analyzed, largely from a manufacturing perspective. A relatively unexplored dimension of household furniture importing is the perspective of the retailer. Retailers play a...

  10. The global wood furniture value chain: what prospects for upgrading by developing countries? The case of South Africa

    OpenAIRE

    Kaplinsky, Raphael; Memedovic, Olga; Morris, Mike; Readman, Jeff

    2003-01-01

    Because of its resource and labour intensity, the wood furniture sector presents an opportunity for developing countries and their firms to participate effectively in the global economy. This paper begins with a brief description of the global wood furniture industry and highlights the importance of exports wood furniture products for developing countries and emerging and transitional economies. The paper then maps the wood furniture value chain and opens-up the nature of the buying function,...

  11. China’s wood furniture manufacturing industry: industrial cluster and export competitiveness

    OpenAIRE

    Yang, hongqiang; Ji, Chunyi; Nie, Ning; Hong, Yinxing

    2012-01-01

    China is the largest furniture exporter in the world. Its wood furniture industry has become an important part of the country’s forestry economic development. Hence, investigating China’s furniture industry cluster and export competitiveness is favorable for the sustainable development of China’s forestry industry. This study indicates that, under the guidance of the export-oriented strategy of China’s reform and opening up for 30 years, the country’s furniture industry has formed three big i...

  12. Prioritization of Wood Species Utilized for Furniture Making in ...

    African Journals Online (AJOL)

    The preference for wood species varied among the three cities and among the three scales of furniture factories. However, Mansonia altissima was most preferred in the three cities with rates of 99.0%, 97.4% and 97.7% in Lagos, Ibadan and Benin respectively. 39 wood species were compiled from the lists of the three cities ...

  13. Transitioning Wood Furniture Products towards Sustainability

    OpenAIRE

    Lu, Lei; Zhang, WeiGuang; Zhang, WeiQing

    2008-01-01

    Wood Furniture Products (WFPs) play a significant role in both the global economy and the transition of society towards sustainability. This paper begins with a brief description of the industry and highlights the current challenges and compelling measures of WFPs from a systems perspective through the lens of the Framework for Strategic Sustainable Development (FSSD) and by applying backcasting from sustainability principles (SPs). An examination of the challenges and opportunities of WFPs i...

  14. The Amish furniture cluster in Ohio: competitive factors and wood use estimates

    Science.gov (United States)

    Matthew Bumgardner; Robert Romig; William Luppold

    2008-01-01

    This paper is an assessment of wood use by the Amish furniture cluster located in northeastern Ohio. The paper also highlights the competitive and demographic factors that have enabled cluster growth and new business formation in a time of declining market share for the overall U.S. furniture industry. Several secondary information sources and discussions with local...

  15. Integrating Energy and Environmental Management in Wood Furniture Industry

    Science.gov (United States)

    Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

  16. Integrating energy and environmental management in wood furniture industry.

    Science.gov (United States)

    Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

  17. DEMONSTRATION OF NO-VOC/NO-HAP WOOD FURNITURE COATING SYSTEM

    Science.gov (United States)

    The United States Environmental Protection Agency has contracted with AeroVironment Environmental Services, Inc. and its subcontractor, Adhesives Coating Co., to develop and demonstrate a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating s...

  18. POLLUTION PREVENTION CASE STUDIES: LOW-VOC/HAP WOOD FURNITURE COATINGS

    Science.gov (United States)

    This article provides a brief profile of the wood furniture industry, discusses pollution prevention activities typically implemented, describes the four low-VOC/HAP coating technologies studied. and summarizes one case study for each of the low-VOC/HAP coating yechnologies inves...

  19. Global Market Access in the Internet Era: South Africa's Wood Furniture Industry.

    Science.gov (United States)

    Moodley, Sagren

    2002-01-01

    Explores the link between Internet connectivity and access to global markets, and uses the South African wood furniture producers as they are integrated into global value chains and exposed to the demands of more sophisticated markets. Articulates policy recommendations to promote greater diffusion of e-commerce technologies in the wood furniture…

  20. Studies on the Wood-Based Furniture, Leather Products and Footwear Manufacturing Industries in the Philippines

    OpenAIRE

    Poblador, Niceto; Solis, Adriano; Ybanez, Roy; Aragon, Bienvenido

    1983-01-01

    This paper aims to develop both the micro and macro data on the entire range of socioeconomic, managerial and technical issues faced by the wood-based furniture, footwear and leather tanning industry. The studies are intended to provide an initial base for policy formulation and implementation and to evolve a set of relevant guidelines for managerial and technical decisions. Findings show that the wood-based furniture industry is characterized by relative ease of entry that allows manufacture...

  1. Upgrading Wood-Based Industries: Harnessing the Social Network of Small-Scale Furniture Producers and Their Institutions

    Directory of Open Access Journals (Sweden)

    Melati ,

    2011-05-01

    Full Text Available Furniture is a major export commodity in Indonesia with a total value of USD 1.96 million in 2007.  Jepara District is one of the key location for wood furniture production with 15,271 furniture related business units employing 176,469 workers.  However, inefficiencies and power imbalances throughout the furniture value chain have resulted in overharvesting and uneven distribution of gains among the industry’s actors.  In contrast to price-setting international furniture retailers, small-scale producers enjoy the least value from their products.  In order to increase added value and competitiveness, small-scale furniture producers have made efforts to upgrade by harnessing their social network and institutions.  This paper describes small-scale furniture producers’ efforts to upgrade by utilising their social network and institutions in Jepara.  Data was collected through in-depth interviews with members of the small-scale furniture producers’ association.  The research provides insight into the nature of social networks and information flow and develops future scenarios to upgrade.  The scenarios will not only benefit the furniture industry in Jepara, but may also be adopted for similar industries throughout Indonesia and the world, and potentially improve many people’s economies and livelihoods.Keywords: wood-based industry, furniture, small-scale, social network, institution

  2. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

    2012-06-01

    between wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

  3. Dating furniture and coopered vessels without waney edge - Reconstructing historical wood-working in Austria with the help of dendrochronology.

    Science.gov (United States)

    Klein, Andrea; Nemestothy, Sebastian; Kadnar, Julia; Grabner, Michael

    In the present study, 208 furniture and 168 coopered vessels from three Austrian museums were examined. Dendrochronology was used to date objects and to extract further information such as the necessary time for seasoning, wood loss through wood-working and methods of construction. In most cases sampling was done by sanding the cross section and making digital photographs using a picture frame and measuring digitally. The dendrochronological dates of the sampled furniture range between 1524 and 1937. The group of furniture includes cupboards, chests, tables, benches, commodes and beds. In many cases furniture was artfully painted and sometimes even shows a painted year. With the help of dendrochronology it was proved that some objects had been painted for some time after construction, or had been over-painted. Most furniture, however, was painted immediately after completion. In this case, the seasoning and storage time of the boards and the wood loss due to shaping can be verified. As an average value, 14 years have passed between the dendrochronological date of the outermost ring and the painting. The time span includes time of seasoning and storage and the rings lost by wood-working. This leads, on the one hand to a short storage time of less than 10 years and on the other hand to very little wood loss due to manufacturing. Those boards being less shaped turned out to be back panels of cupboards, therefore they are recommended to be sampled for dating. Coopered vessels were dated between 1612 and 1940. There was evidence that staves were split and not sawn in many cases. The staves were often split out of the outermost part of the tree and hardly any wood was worked away which was proved by the close dendrochronological dates of the single staves of a vessel. Since there is a short time of storage and only little wood loss through wood-working, dating of objects without a waney edge becomes reasonable.

  4. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

    2012-06-01

    Full Text Available Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

  5. Decline in the U.S. furniture industry: a case study of the impacts to the hardwood lumber supply chain

    Science.gov (United States)

    Shawn T. Grushecky; Urs Buehlmann; Al Schuler; William Luppold; Ed Cesa

    2006-01-01

    Traditionally, the wood household furniture industry has accounted for a sizeable portion of total hardwood lumber use in the United States. However, for more than a decade, imports have gained an increasing share of the hardwood furniture market, and lumber consumption by this industry has declined dramatically in the last 5 years. We used a case study methodology to...

  6. Assessment of occupational exposure to wood dust in the Polish furniture industry

    Directory of Open Access Journals (Sweden)

    Małgorzata Szewczyńska

    2017-02-01

    Full Text Available Background: Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Material and Methods: Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Results: Total dust concentrations were 0.84–13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34–22.13 mg/m3. Respirable fraction concentrations were 0.38–4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. Conclusions: The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1:45–60

  7. [Assessment of occupational exposure to wood dust in the Polish furniture industry].

    Science.gov (United States)

    Szewczyńska, Małgorzata; Pośniak, Małgorzata

    2017-02-28

    Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Total dust concentrations were 0.84-13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34-22.13 mg/m3. Respirable fraction concentrations were 0.38-4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV) for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1):45-60. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  8. New productive technologies for wood and furniture industry; Nuevas tecnologias productivas para el sector de la madera y del mueble

    Energy Technology Data Exchange (ETDEWEB)

    Sojo Calvo, F. J.

    2012-07-01

    During recent years, the wood industry and furniture industry have declined sharply, up to 46,5% of the total employment. These companies have always had a familiar character, their cost structure has enabled them to stay afloat during the crisis while larger companies have succumbed. The main problems that threaten their viability are the fall of the construction sector in the case of wood and the increasing imports in the case of furniture. The Industrial Observatory of the Wood Industry has made available two tools to put the latest technology available to the companies. (Author)

  9. Wood Dust in Joineries and Furniture Manufacturing : An Exposure Determinant and Intervention Study

    NARCIS (Netherlands)

    Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

    Objectives: To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop,

  10. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    OpenAIRE

    and Shalihuddin Djalal Tandjung, Muh. Hisjam Adi Djoko Guritno

    2012-01-01

    Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM) model is proposed as an approach for solutions fo...

  11. Technology of Furniture Production

    OpenAIRE

    Danilova, Kseniia

    2016-01-01

    Manufacturing of furniture is one of the main processes of timber utilization. Furniture of Timberica Oy brand is made by special technology which does not allow use aggressive chemicals that can be harmful to humans, in wood processing. The furniture is made of Karelian "white" pine. Company's headquarters are located in Finland, its specialists improve and carefully controlled manufacturing process at the furniture factory in Karelia. Timberica Oy has produced furniture since 1998. They...

  12. APPLICATION OF NEAR INFRARED SPECTROSCOPY AND EXPLORATORY DATA ANALYSIS FOR THE IDENTIFICATION OF WOODS IN THE FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Lucas Ferreira Bastos

    2012-07-01

    Full Text Available The paper aimed to investigate the application of infrared spectroscopy and exploratory data analysis to distinguish the different types of natural woods, contributing to the control of the origin of the materials used in the furniture industry. The near infrared spectroscopy (NIR was used for the characterization of 44 samples of 19 different types of wood, and the principal component analysis (PCA to discriminate. The proposed methodology was efficient in the separation of some samples, but further studies should be performed for the diffusion of this methodology in the routine of the furniture industry.

  13. Source emission and model evaluation of formaldehyde from composite and solid wood furniture in a full-scale chamber

    Science.gov (United States)

    Liu, Xiaoyu; Mason, Mark A.; Guo, Zhishi; Krebs, Kenneth A.; Roache, Nancy F.

    2015-12-01

    This paper describes the measurement and model evaluation of formaldehyde source emissions from composite and solid wood furniture in a full-scale chamber at different ventilation rates for up to 4000 h using ASTM D 6670-01 (2007). Tests were performed on four types of furniture constructed of different materials and from different manufacturers. The data were used to evaluate two empirical emission models, i.e., a first-order and power-law decay model. The experimental results showed that some furniture tested in this study, made only of solid wood and with less surface area, had low formaldehyde source emissions. The effect of ventilation rate on formaldehyde emissions was also examined. Model simulation results indicated that the power-law decay model showed better agreement than the first-order decay model for the data collected from the tests, especially for long-term emissions. This research was limited to a laboratory study with only four types of furniture products tested. It was not intended to comprehensively test or compare the large number of furniture products available in the market place. Therefore, care should be taken when applying the test results to real-world scenarios. Also, it was beyond the scope of this study to link the emissions to human exposure and potential health risks.

  14. Physical and chemical evaluation of furniture waste briquettes.

    Science.gov (United States)

    Moreno, Ana Isabel; Font, Rafael; Conesa, Juan A

    2016-03-01

    Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified material by co-densification of furniture wood waste and polyurethane foam waste. Densification of furniture wood and the co-densification of furniture wood waste with polyurethane foam have been studied. On the one hand, the parameters that have an effect on the quality of the furniture waste briquettes have been analysed, i.e., moisture content, compaction pressure, presence of lignin, etc. The maximum weight percentage of polyurethane foam that can be added with furniture wood waste to obtain durable briquettes and the optimal moisture were determined. On the other hand, some parameters were analysed in order to evaluate the possible effect on the combustion. The chemical composition of waste wood was compared with untreated wood biomass; the higher nitrogen content and the concentration of some metals were the most important differences, with a significant difference of Ti content. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Wood fuels consumption in households in Montenegro

    Directory of Open Access Journals (Sweden)

    Glavonjić Branko D.

    2013-01-01

    Full Text Available The paper presents the results of researching wood fuels consumption in households in Montenegro in the heating season 2011/2012. The research was conducted in the period October-November 2012 on the sample of 5% of the total number of households which stated to use solid fuels for heating purposes in the 2011 census. Results of the conducted researches on the presence and amounts of fuels consumed in households in Montenegro showed that total firewood consumption in the heating season 2011/2012 (both urban and rural households was 703,571 m3. Wood consumption is the lowest in the households in the municipalities in the coastal zone, it is somewhat higher in central zone and the highest in the zone on the north of Montenegro. Average wood consumption in households in the coastal zone municipalities is 3.79 m3, in the central zone it is 5.02 m3 and on the north of Montenegro it is 6.74 m3/household. Observed on the level of Montenegro, average firewood consumption per household was 5.49 m3 and as such it best represents relatively low consumption level in the coastal zone and high consumption level on the north of Montenegro. Compared to the neighboring countries, average firewood consumption per household in Montenegro in the amount of 5.49 m3 is significantly lower than the average consumption in Serbia which is 7.3 m3/household as well as in Slovenia in the amount of 6.5 m3.

  16. Identifying and prioritizing indicators and effective solutions to optimization the use of wood in construction classical furniture by using AHP (Case study of Qom

    Directory of Open Access Journals (Sweden)

    Mohammad Ghofrani

    2017-02-01

    Full Text Available AbstractThe aim of this study was to identify and prioritize the indicators and provide effective solutions to optimize the use of wood in construction classical furniture using the analytic hierarchy process (case study in Qom. For this purpose, studies and results of other researchers and interviews with experts, the factors affecting the optimization of wood consumption were divided into 4 main categories and 23 sub-indicators. The importance of the sub after getting feedback furniture producers were determined by AHP. The results show that the original surface design and human resources are of great importance. In addition, among 23 sub-effective optimization of the use of wood in construction classical furniture, ergonomics, style, skill training and inlaid in classical furniture industry in order to weight the value of 0/247, 0/181, 0/124 and 0/087 are of paramount importance and the method of use of force specialist solutions were a priority.

  17. Wood Dust in Joineries and Furniture Manufacturing: An Exposure Determinant and Intervention Study.

    Science.gov (United States)

    Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

    2017-05-01

    To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop, implement, and evaluate a cost-effective and practicable intervention to reduce dust exposures. Personal inhalable dust (n = 201) was measured in 99 workers from 10 joineries and 3 furniture-making factories. To assess exposure determinants, full-shift video exposure monitoring (VEM) was conducted in 19 workers and task-based VEM in 32 workers (in 7 joineries and 3 furniture factories). We assessed the efficacy of vacuum extraction on hand tools and the use of vacuum cleaners instead of sweeping and dry wiping under laboratory conditions. These measures were subsequently implemented in three joinery workshops with 'high' (>4 mg m-3) and one with 'low' (joinery and furniture making were 2.5 mg m-3 [geometric standard deviations (GSD) 2.5] and 0.6 mg m-3 (GSD 2.3), respectively. In joinery workers cleaning was associated with a 3.0-fold higher (P joineries, a borderline statistically significant (P joinery workers and (to a lesser extent) furniture makers with frequent use of hand tools and cleaning being key drivers of exposure. Vacuum extraction on hand tools and alternative cleaning methods reduced workplace exposures substantially, but may be insufficient to achieve compliance with current occupational exposure limits. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  18. Technical changes and the rate of profit in the Canadian wood, furniture, and paper industries

    OpenAIRE

    M Webber; S Tonkin

    1988-01-01

    In this paper the rate of profit is examined and the components of changes in the rate of profit are identified in the wood, furniture, and paper industries of Canada for the years 1952 to 1981. The rate of profit in the wood industry generally rose, until a dramatic fall since 1979 onwards; this fall was largely due to a collapse of market prices and to the effects of that collapse on the technical composition of capital (via changes in the rate of capacity utilization). Profit rates in the ...

  19. Implementation of new technologies in wood industry and their effect in wood products quality

    OpenAIRE

    ELVA ÇAUSHI; PANDELI MARKU

    2014-01-01

    There are about 300 companies producing furniture and about 250 small and medium enterprises (SME) producing sawn timber, which operate in the field of wood industry in Albania. This wood industry production is being challenged by the increasing demand in the domestic market, ranging from kitchen furniture to office and schools furniture, bedroom furniture, doors, windows, and saw timber in different dimensions. The production from the wood industry can fulfill about 80% of the domestic mark...

  20. 41 CFR 101-25.404 - Furniture.

    Science.gov (United States)

    2010-07-01

    ...-25.404 Furniture. Furniture (office, household and quarters, and institutional) shall not be replaced unless the estimated cost of repair or rehabilitation (based on GSA term contracts), including any... which rehabilitation of the furniture at 75 percent or less of the cost of a new item would not extend...

  1. Analysis of Usability in Furniture Production of Wood Plastic Laminated Board

    Directory of Open Access Journals (Sweden)

    Abdullah Cemil Ilçe

    2015-05-01

    Full Text Available The objective of this study was to manufacture a lightweight and easily producible wood plastic laminate (WPL board that could be used in the furniture sector. Eastern beech (Fagus orientalis L. veneer papels (A and hollow polycarbonate boards (B, both with a thickness of 4 mm, were laminated in different combinations using polyurethane (PUR and polychloroprene (PCR adhesives. The physical and mechanical properties of the WPL boards obtained were determined according to the principles specified in the EN 326-1, EN 317, EN 310, ASTM D1037, and ASTM D1761 standards. Subsequently, the specimens were compared with particle boards (PB, medium density fiberboards (MDF, and okoume plywoods (PW. According to the results, the AABAA, ABABA, and ABBBA combinations of the WPL materials had better physical properties, such as weight, water absorption, and swelling thickness, compared to the other composites. Furthermore, because the WPL materials had a high bending resistance, modulus of elasticity, and nail and screw withdrawal strength, they could be used instead of PB and MDF. The WPL material obtained within the scope of this study are suitable for furniture making.

  2. Marketing Hardwoods to Furniture Producers

    Science.gov (United States)

    Steven A. Sinclair; Robert J. Bush; Philip A. Araman

    1989-01-01

    This paper discusses some of the many problems in developing marketing programs for small wood products manufacturers. It examines the problems of using price as a dominant means for getting and attracting customers. The marketing of hardwood lumber to furniture producers is then used as an example. Data from 36 furniture lumber buyers is presented to illustrate...

  3. Emissions from co-combustion of wood and household refuse

    International Nuclear Information System (INIS)

    Zhang, X.J.; Peterson, F.

    1996-01-01

    An investigation was carried out on the emissions produced in a 20 kW experimental boiler burning a combination of wood and household refuse. The wood content ranged form 10 to 50%. Direct sampling with Tenax adsorbent was used to cover a range of volatile organic compounds (VOCs). The measurements also included unburned hydrocarbons, carbon monoxide, carbon dioxide, oxygen and flue gas temperature. Combustion and emission parameters were recorded continuously with a multi-point data logger. VOCs were analyzed by gas chromatography and mass spectrometer (GC/MS). The main emphasis was placed on the effect of wood on VOC emissions. The results showed that as the wood content increased from 10 to 50%, there was a roughly linear increase in emissions of total VOCs. Carbon monoxide and unburned hydrocarbon emissions also increased. These results suggest that household refuse is a good substitute for wood as a boiler fuel, as it has a similar calorific value but fewer emissions. (Author)

  4. Factors influencing the, selection of state office furniture

    Science.gov (United States)

    R. Bruce Anderson; R. Bruce Anderson

    1973-01-01

    Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

  5. Investigation of Miter Corner Joint Strength of Case Furniture from Particleboard

    Directory of Open Access Journals (Sweden)

    Valdas NORVYDAS

    2012-12-01

    Full Text Available Most pieces of case furniture (kitchen and bathroom furniture, cabinets, wardrobes, tables and etc. are made of 18 mm thick wood particle boards finished with various coatings. This three-layered constructional material is obtained by bonding wood particles of different fractions with synthetic resins using heating. The exploitation duration and quality of case furniture is determined by the mechanical properties of wood particle boards and the construction of joints of wood-based panels. On a frequent basis, pieces of case furniture with non-dismantable and dismantable construction are joined by using multidowel glued joints and cam connecting fittings intended for furniture, respectively. Wood-based panels can be joined with mitre joints whose mechanical properties have not undergone testing and comparison with regular joints when applying insertable wooden dowels or furniture connecting fittings. During the testing of particle board properties it was established that joining wood-based panels in this way ensures most efficient use of mechanical characteristics of the particleboard. In addition to the properties of the mitre joint, the tests also allowed determining the bending strength, tensile strength and bonding strength of the constructional material, and providing an original method for testing board properties, which can be successfully applied to the prediction of properties of the mitre joint. Tests were performed by using a universal tensile testing machine P-0.5. Joints were bonded by applying PVA dispersion. The surface of boards was veneered by using mahogany veneer and urea formaldehyde resin. It was found that mitre joints of wood particle boards can withstand loads that are higher from 2 to 4 times, in comparison to glued doweled joints or joints constructed with cam connecting fittings.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3095

  6. Household wood heater usage and indoor leakage of BTEX in Launceston, Australia: A null result

    Science.gov (United States)

    Galbally, Ian E.; Gillett, Robert W.; Powell, Jennifer C.; Lawson, Sarah J.; Bentley, Simon T.; Weeks, Ian A.

    A study has been conducted in Launceston, Australia, to determine within households with wood heaters the effect of leakage from the heater and flue on the indoor air concentrations of the pollutants: benzene, toluene, ethylbenzene and xylene (BTEX). The study involved three classes: 28 households without wood heaters, 19 households with wood heaters compliant with the relevant Australian Standard and 30 households with non-compliant wood heaters. Outdoor and indoor BTEX concentrations were measured in each household for 7 days during summer when there was little or no wood heater usage, and for 7 days during winter when there was widespread wood heater usage. Each participant kept a household activity diary throughout their sampling periods. For wintertime, there were no significant differences of the indoor BTEX concentrations between the three classes of households. Also there were no significant relationships between BTEX indoor concentrations within houses and several measures of the amount of wood heater use within these houses. For the households sampled in this study, the use of a wood heater within a house did not lead to BTEX release within that house and had no direct detectable influence on the concentrations of BTEX within the house. We propose that the pressure differences associated with the both the leakiness or permeability of the building envelope and the draught of the wood heater have key roles in determining whether there will be backflow of smoke from the wood heater into the house. For a leaky house with a well maintained wood heater there should be no backflow of smoke from the wood heater into the house. However backflow of smoke may occur in well sealed houses. The study also found that wood heater emissions raise the outdoor concentrations of BTEX in winter in Launceston and through the mixing of outdoor air through the building envelopes into the houses, these emissions contribute to increases in the indoor concentrations of BTEX in

  7. Factors affecting wood energy consumption by U.S. households

    Science.gov (United States)

    Nianfu Song; Francisco X. Aguilar; Stephen R. Shifley; Michael E. Goerndt

    2012-01-01

    About 23% of energy derived from woody sources in the U.S. was consumed by households, of which 70% was used by households in rural areas in 2005. We investigated factors affecting household-level wood energy consumption in the four continental U.S. regions using data from the U.S. Residential Energy Consumption Survey. To account for a large number of zero...

  8. Determinants of wood dust exposure in the Danish furniture industry.

    Science.gov (United States)

    Mikkelsen, Anders B; Schlunssen, Vivi; Sigsgaard, Torben; Schaumburg, Inger

    2002-11-01

    This paper investigates the relation between wood dust exposure in the furniture industry and occupational hygiene variables. During the winter 1997-98 54 factories were visited and 2362 personal, passive inhalable dust samples were obtained; the geometric mean was 0.95 mg/m(3) and the geometric standard deviation was 2.08. In a first measuring round 1685 dust concentrations were obtained. For some of the workers repeated measurements were carried out 1 (351) and 2 weeks (326) after the first measurement. Hygiene variables like job, exhaust ventilation, cleaning procedures, etc., were documented. A multivariate analysis based on mixed effects models was used with hygiene variables being fixed effects and worker, machine, department and factory being random effects. A modified stepwise strategy of model making was adopted taking into account the hierarchically structured variables and making possible the exclusion of non-influential random as well as fixed effects. For woodworking, the following determinants of exposure increase the dust concentration: manual and automatic sanding and use of compressed air with fully automatic and semi-automatic machines and for cleaning of work pieces. Decreased dust exposure resulted from the use of compressed air with manual machines, working at fully automatic or semi-automatic machines, functioning exhaust ventilation, work on the night shift, daily cleaning of rooms, cleaning of work pieces with a brush, vacuum cleaning of machines, supplementary fresh air intake and safety representative elected within the last 2 yr. For handling and assembling, increased exposure results from work at automatic machines and presence of wood dust on the workpieces. Work on the evening shift, supplementary fresh air intake, work in a chair factory and special cleaning staff produced decreased exposure to wood dust. The implications of the results for the prevention of wood dust exposure are discussed.

  9. 78 FR 35249 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2013-06-12

    ....; Dongying Huanghekou Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar... Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar Enterprises Ltd... DEPARTMENT OF COMMERCE International Trade Administration [A-570-890] Wooden Bedroom Furniture...

  10. Furniture Industry Assessment: Trade Policy and Market Opportunities

    OpenAIRE

    Lord, Montague J.

    1999-01-01

    The report analyzes the international competitiveness of furniture industry based on calculations of effective rates of protection and trade indicators. Furniture manufacturing remains one of the most highly protected industries in Egypt. Although the nominal rate of protection (NRP) for that industry was lowered from 50 percent in 1997 to 40 percent, its rate remains the fourth highest of all manufacturing categories. The effective rate of protection (ERP) for the wood furniture industry is ...

  11. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    OpenAIRE

    Ika Rinawati Dyah; Sriyanto; Puspita Sari Diana; Cantya Prayodha Andana

    2018-01-01

    Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical mater...

  12. Wood, energy and households: perspectives on rural Kenya

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, C; Ensminger, J; O' Keefe, P [eds.

    1984-01-01

    A collection of nine articles on agricultural and pastoral households in Kenya stems from a growing concern about the ability of households to meet their energy needs as the demand for wood resources increasingly outstrips the supply and the potential for securing non-biomass sources appears bleak. The future for most rural households relates to the socio-economic differentiation and the economic condition which exists in most Fourth World countries. The studies reflect the author's diverse interests in ecology, economics, geography, history, and anthropology, but all employ a household-level analysis. Separate abstracts were prepared for the nine chapters selected for the Energy Data Base (EDB) and Energy Abstracts for Policy Analysis (EPA).

  13. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Ika Rinawati Dyah

    2018-01-01

    Full Text Available Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  14. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Science.gov (United States)

    Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

    2018-02-01

    Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  15. U.S. Competitiveness Study: How Furniture and Cabinet Manufacturers Compare

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Al Schuler; Rich Christianson

    2003-01-01

    A disturbing 37.2%, of the 341 manufacturing executives participating in the U.S. Wood Competitiveness Survey either strongly agreed or agreed "that by the end of the decade, little will remain of domestic wood furniture and other wood products manufacturing in the United States."

  16. Wood wastes: Uses

    International Nuclear Information System (INIS)

    Cipro, A.

    1993-01-01

    The 1,500 industrial firms manufacturing furniture in the Italian Province of Treviso can generate up to 190,000 tonnes of wood wastes annually. In line with the energy conservation-environmental protection measures contained in Italian Law No. 475/88, this paper indicates convenient uses for these wood wastes - as a raw material for fibreboards or as a fuel to be used in the furniture manufacturing plants themselves and in kilns producing lime. Reference is made to the wood wastes gasification/power generation system being developed by ENEA (the Italian Agency for New Technology, Energy and the Environment)

  17. Wood Dust

    Science.gov (United States)

    Learn about wood dust, which can raise the risk of cancers of the paranasal sinuses and nasal cavity. High amounts of wood dust are produced in sawmills, and in the furniture-making, cabinet-making, and carpentry industries.

  18. Norwegian households' perception of wood pellet stove compared to air-to-air heat pump and electric heating

    International Nuclear Information System (INIS)

    Sopha, Bertha Maya; Kloeckner, Christian A.; Skjevrak, Geir; Hertwich, Edgar G.

    2010-01-01

    In 2003, the high dependency on electric heating combined with the high electricity price prompted a significant number of Norwegian households to consider alternative heating systems. The government introduced economic support for wood pellet heating and heat pumps. In contrast to the fast growing heat pump market, this financial support has not resulted in a widespread adoption of wood pellet heating. This paper studies factors that influence the choice of heating system based on Norwegian households' perceptions. Electric heating, heat pump and wood pellet heating were compared, with a special focus on wood pellet heating. This study was conducted as a questionnaire survey on two independent samples. The first sample consisted of 188 randomly chosen Norwegian households, mainly using electric heating; the second sample consisted of 461 households using wood pellet heating. Our results show that socio-demographic factors, communication among households, the perceived importance of heating system attributes, and the applied decision strategy all influence the Norwegian homeowners. The significance of these factors differs between the two samples and the preferred type of anticipated future heating system. Strategies for possible interventions and policy initiatives are discussed.

  19. WOOD PROPERTIES AND EFFECT OF WOOD PROPERTIES ON THE WOOD FINISHING

    Directory of Open Access Journals (Sweden)

    Abdulkadir Malkoçoğlu

    2006-04-01

    Full Text Available Wood is basic raw material for furniture and joinery industries with wood structures. Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth condition, size of the tree at harvest, sawing, and other manufacturing processes. Wood properties have been characterized within two groups as natural and manufacturing factors that effects finishing performance. Grow rate, density, knots, moisture content, extractives and juvenile wood are natural characteristics. Grain orientation, texture, drying and performance expectations are manufacturing characteristics. In this review, the effects of natural and manufacturing characteristics are discussed on the surface finishing performance of wood.

  20. Identifying future competitive business strategies for the U.S. furniture industry: Benchmarking and paradigm shifts

    Science.gov (United States)

    Albert Schuler; Urs Buehlmann

    2003-01-01

    This paper describes benchmarking activities undertaken to provide a basis for comparing the U.S. wood furniture industry with other nations that have a globally competitive furniture manufacturing industry. The second part of this paper outlines and discusses strategies that have the potential to help the U.S. furniture industry survive and thrive in a global business...

  1. Contact allergy to finished woods in furniture and furnishings: a small allergic contact dermatitis epidemic to western red cedar in sauna interior decoration.

    Science.gov (United States)

    Huilaja, L; Kubin, M E; Riekki, R

    2016-01-01

    Allergic contact dermatitis caused by wood dust remains uncommon and most cases are occupational. Contact allergy to finished wooden products is even more rare and only few cases of contact dermatitis to wooden furnishings and furniture are described. During 2012-2014 surprisingly many patients with dermatitis associated to sauna baths were referred to our clinic. We report three novel cases with allergic contact dermatitis to western red cedar due to exposure during sauna baths. Three cases of non-occupational contact dermatitis to western red cedar were confirmed by patch testing. Allergic contact dermatitis to interior decoration or furniture is a rarity, but can be induced by novel exposures, like western red cedar in sauna interior decoration. © 2015 European Academy of Dermatology and Venereology.

  2. Use of lasers in the furniture industry

    Science.gov (United States)

    Wieloch, Grzegorz; Pohl, Piotr

    1995-03-01

    One of the ways of using laser in industry is its usage in loss treatment of wood and composite wood products. In the furniture industry the above mentioned machining is used in such technological processes in which tool machining (sawing, molding) is not economical or even possible. These processes are mainly curvilinear cutting of layer materials like veneers, plywood, and face layers and thicker materials like particleboards, fiberboards, and lumber- core panels. Wide usage has also been achieved in heat treatment in wood for decoration. It can be calcinating designs, engraving them, blackening of parts of surfaces, or changing of anatomic characteristics of wood tissue. Nevertheless laser usage in recliner cutting seems at present causeless.

  3. A survey into process and worker's characteristics in the wood furniture industry in Songkhla Province, southern region of Thailand.

    Science.gov (United States)

    Tuntiseranee, P; Chongsuvivatwong, V

    1998-12-01

    A cross-sectional survey of the wood furniture industry was conducted in southern Thailand in February 1993. The aim was to examine the manufacturing process, occupational hazards at the workplace, workers' demographic characteristics, period of employment, incidence rate of work related injury and some reproductive history of workers. Altogether 69 managers and 1,000 workers participated in the study. There are 2 main types of wood industry, rubberwood and hardwood. The rubberwood industry is semi-automated with advanced technology, has a female-dominated workforce of 200-300 workers per factory and overseas-market orientation. The hardwood industry is based in small-scale workplaces ranging from 20 to 60 workers, domestic-market orientation and has a male-dominated workforce. Most of the workers were young, single, of low education and were high turnover rate laborforce, with arduous work and long working hours per week. Solvent was the most frequent chemical exposure. The person-year incidence of chemical exposure in female workers was higher than in male workers for every group of chemicals. The incidence of accidents was twice as high as the official rate. The standardized fertility ratio of female wood workers was only 51.6% of that of the Thai female population. There was a high abortion rate among women who became pregnant inside the wood industry compared to that among pregnancies outside the wood factory. Wood industry workers were exposed to occupational hazards and accident-prone work conditions.

  4. 78 FR 70267 - Multilayered Wood Flooring From the People's Republic of China: Preliminary Results of...

    Science.gov (United States)

    2013-11-25

    .... (``Armstrong''), Fine Furniture (Shanghai) Limited (``Fine Furniture'') and Zhejiang Layo Wood Industry Co... dumping margin Exporter (percent) Minglin 0.00 (de minimis) Fine Furniture 0.67 Layo Wood 8.85 Armstrong 8... Guangdong Fu Lin Timber Technology 4.77 Limited. Guangdong Yihua Timber Industry Co., 4.77 Ltd. Guangzhou...

  5. The Level of Utilization of Secondary Timber Species among Furniture Producers

    Directory of Open Access Journals (Sweden)

    Charles Antwi-Boasiako

    2016-06-01

    Full Text Available Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and Methods: Data were collected from 300 Timber Firms from Ghana primarily through questionnaires using the stratified random sampling technique. Results: Continuous decline and non-availability of preferred traditional timbers and competition from imported furniture were the main challenges confronting the furniture industry. Data obtained indicated that most manufacturers (85% hardly use any LUS; 44% of these mentioned lack of information on their properties and prospective uses and 32% attributed it to non-availability on the domestic timber markets. However, 22% of these producers rely on traditionally ‘well-known’ timbers (e.g. mixed red wood, Guarea cedrata and Tectona grandis owing to their strength properties, 20% due to their strength and durability and 14% because of their strength and aesthetic properties. Many LUS (with prospects for furniture-making available in great quantities in many tropical forests could substitute the over-dependent timbers. However, information on their properties and uses are hardly available to local producers, which affects their popularity among timber suppliers and manufacturers. Conclusion: To improve on the level of utilization of secondary timbers, wood workers must be supplied with comprehensive information about their properties and economic values. This will contribute to reducing pressure on the primary timbers, ensuring consistent supply of timber and keeping the sector operational.

  6. Eco-innovation of a wooden childhood furniture set: an example of environmental solutions in the wood sector.

    Science.gov (United States)

    González-García, Sara; García Lozano, Raúl; Moreira, M Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo; Murphy, Richard J

    2012-06-01

    The environmental profile of a set of wood furniture was carried out to define the best design criteria for its eco-design. A baby cot convertible into a bed, a study desk and a bedside table were the objects of study. Two quantitative and qualitative environmental approaches were combined in order to propose improvement alternatives: Life Cycle Assessment (LCA) and Design for Environment (DfE). In the first case Life Cycle Assessment (LCA) was applied to identify the hot spots in the product system. As a next step, LCA information was used in eco-briefing to determine several improvement alternatives. A wood products company located in Catalonia (NE Spain) was assessed in detail, dividing the process into three stages: assembly, finishing and packaging. Ten impact categories were considered in the LCA study: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity and photochemical oxidant formation. Two processes can be considered the key environmental factors: the production of the wooden boards and electricity, with contributions of 45-68% and 14-33% respectively depending on the impact categories. Subsequently, several improvement alternatives were proposed in the eco-design process (DfE) to achieve reductions in a short-medium period of time in the environmental impact. These eco-design strategies could reduce the environmental profile of the setup by 14%. The correct methodological adaptation of the concept of eco-briefing, as a tool for communication among environmental technicians and designers, the simplification of the analytical tool used and the LCA, could facilitate the environmental analysis of a product. The results obtained provide information that can help the furniture sector to improve their environmental performance. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. The Level of Utilization of Secondary Timber Species among Furniture Producers

    OpenAIRE

    Antwi-Boasiako, Charles; Boadu, Kwadwo Boakye

    2016-01-01

    Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS) that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and ...

  8. Wood, Energy and Households. Perspectives on Rural Kenya

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, C; Ensminger, J; O' Keefe, P [eds.

    1984-01-01

    The studies in this volume reflect a wide diversity of disciplinary backgrounds and interests among the contributors. Ecology, economics, geography, history and anthropology are all presented. The studies themselves, however, have a number of foci in common. All to some extent employ a household-level analysis and almost all of the studies derive some measure of household woodfuel use and analyze factors which determine the supply and demand for wood and other fuels. Many of the studies deal at some length with the availability of woodfuel, and specifically, the amount of time spent in procurement. As fuelwood is still in many areas available for gathering at no cash cost, its real cost is usually the value of women's labour spent in its collecting, and this has been discussed in many of the papers. Where woodfuel has become a commercial product, its pricing and availability on the market are also discussed. In all areas wood supply has competing demands, most commonly for building purpose. In many cases kerosene is now being used for light in place of open fires and torches inside houses. A number of the studies discuss the availability, cost, use and effects of such substitution on national balance of payments. Not surprisingly, most studies find a relationship between the availability of woodfuel and the level of use. Many also relate usage to changing diet.

  9. Influence of way of finishing furniture segments on amount emissions VOCs

    Directory of Open Access Journals (Sweden)

    Petr Čech

    2010-01-01

    Full Text Available The study deals with the influence of way of finishing furniture segments on amount emissions VOCs (volatile organic compounds. The so-called Volatile Organic Compounds (VOC are among the largest pollution sources of both the internal and external environments.VOC is defined as emission of any organic compound or a mixture thereof, with the exception of methane, whereby the compound exerts the pressure of 0.01 kPa or more at the temperature of 20 °C (293.15 K and reaches the corresponding volatility under the specific conditions of its use and can undergo photochemical reactions with nitrogen oxides when exposed to solar radiation. The effects of VOC upon environment can be described by equation: VOC + NOx + UV radiation + heat = tropospheric ozone (O3In this work there were tested MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components’ production. Next were tested compressed wood, which was used as a second material of furniture components. These both chosen materials was covered by resin impregnated paper and than sequentially finished by regular coat of finish.An attention of this study is especially put on mentioned factors and on quantity of instant and long-term VOCs emissions emitted from furniture components.The amount of emissions from furniture components, in different phases of the preparation including the resin impregnated paper coating finish, was monitored within the time intervals of 24 hours and 720 hours starting after the time of the finish preparation.The MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components´ production.A compressed wood was used as a second material of furniture components. This alternative material was covered by resin impregnated paper and than sequentially finished by regular coat of finish.

  10. AN ASSESMENT OF CURRENT EMPLOYMENT NEEDS IN THE ROMANIAN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Cristinel Petrişor CONSTANTIN

    2015-12-01

    Full Text Available The paper presents the results of an exploratory survey among Romanian companies from the furniture industry. The study aimed to identify: (1 respondents’ opinions regarding the main competences that a candidate needs to prove in order to be hired; (2 attitudes regarding the competences of the graduates from the Wood Engineering Faculty, Transilvania University of Brasov; and (3 main current employment needs of Romanian furniture industry. The results indicated that the highest importance in the selection of employees is given to transversal competences such as: orientation to quality; learning capacity; and availability for self-development, team working; and involvement in meeting customers’ requirements. The interviewed representatives of the studied companies mainly need skilled workers in the furniture industry but also engineers able to manage the company’s processes, or to design certain processes and products. The results of the present study may be used by the Wood Engineering Faculty in their attempt to adapt the academic curriculum and course contents; and give their graduates a chance to acquire relevant competences which may enhance their employability.

  11. MOISTURE HUMIDITY EQUILIBRIUM OF WOOD CHIPS FROM ENERGETIC CROPS

    Directory of Open Access Journals (Sweden)

    Jan Barwicki

    2008-09-01

    Full Text Available Processes occurring during storage of wood chips for energetic or furniture industry purposes were presented. As a result of carried out investigations, dependences of temperature and relative humidity changes of surrounding air were shown. Modified Henderson equation can be utilized for computer simulation of storing and drying processes concerning wood chips for energetic and furniture industry purposes. It reflects also obtained results from experiments carried out with above mentioned material. Using computer simulation program we can examine different wood chips storing conditions to avoid overheating and loss problems.

  12. Determinants of wood dust exposure in the Danish furniture industry--results from two cross-sectional studies 6 years apart.

    Science.gov (United States)

    Schlünssen, Vivi; Jacobsen, Gitte; Erlandsen, Mogens; Mikkelsen, Anders B; Schaumburg, Inger; Sigsgaard, Torben

    2008-06-01

    This paper investigates determinants of wood dust exposure and trends in dust level in the furniture industry of Viborg County, Denmark, using data from two cross-sectional studies 6 years apart. During the winter 1997/1998, 54 factories were visited (hereafter study 1). In the winter 2003/2004, 27 factories were revisited, and personal dust measurements were repeated. In addition, 14 new factories were included (hereafter study 2). A total of 2303 woodworkers participated in study 1, and 2358 measurements from 1702 workers were available. From study 2, 1581 woodworkers participated and 1355 measurements from 1044 workers were available. Information on occupational variables describing potential determinants of exposures like work task, exhaust ventilation, enclosure and cleaning procedures were collected. A total of 2627 measurements and 1907 persons were included in the final mixed model in order to explore determinants of exposure and trends in dust level. The overall inhalable wood dust concentration (geometric means (geometric standard deviation)) has decreased from 0.95 mg/m(3) (2.05) in study 1 to 0.60 mg/m(3) (1.63) in study 2, representing a 7% annual decrease in dust concentration, which was confirmed in the mixed model. From study 1 to study 2 there has been a change towards less manual work and more efficient cleaning methods, but on the contrary also more inadequate exhaust ventilation systems. The following determinants were found to 'increase' dust concentration: sanding; use of compressed air; use of full-automatic machines; manual work; cleaning of work pieces with compressed air; kitchen producing factories and small factories (furniture industry in Viborg County, further improvements are possible. There should be more focus on improved exhaust ventilation, professional cleaning methods and avoiding use of compressed air.

  13. Determinants of Wood Dust Exposure in the Danish Furniture Industry—Results from Two Cross-Sectional Studies 6 Years Apart

    Science.gov (United States)

    Schlünssen, Vivi; Jacobsen, Gitte; Erlandsen, Mogens; Mikkelsen, Anders B.; Schaumburg, Inger; Sigsgaard, Torben

    2008-01-01

    Objectives: This paper investigates determinants of wood dust exposure and trends in dust level in the furniture industry of Viborg County, Denmark, using data from two cross-sectional studies 6 years apart. Methods: During the winter 1997/1998, 54 factories were visited (hereafter study 1). In the winter 2003/2004, 27 factories were revisited, and personal dust measurements were repeated. In addition, 14 new factories were included (hereafter study 2). A total of 2303 woodworkers participated in study 1, and 2358 measurements from 1702 workers were available. From study 2, 1581 woodworkers participated and 1355 measurements from 1044 workers were available. Information on occupational variables describing potential determinants of exposures like work task, exhaust ventilation, enclosure and cleaning procedures were collected. A total of 2627 measurements and 1907 persons were included in the final mixed model in order to explore determinants of exposure and trends in dust level. Results: The overall inhalable wood dust concentration (geometric means (geometric standard deviation)) has decreased from 0.95 mg/m3 (2.05) in study 1 to 0.60 mg/m3 (1.63) in study 2, representing a 7% annual decrease in dust concentration, which was confirmed in the mixed model. From study 1 to study 2 there has been a change towards less manual work and more efficient cleaning methods, but on the contrary also more inadequate exhaust ventilation systems. The following determinants were found to ‘increase’ dust concentration: sanding; use of compressed air; use of full-automatic machines; manual work; cleaning of work pieces with compressed air; kitchen producing factories and small factories (furniture industry in Viborg County, further improvements are possible. There should be more focus on improved exhaust ventilation, professional cleaning methods and avoiding use of compressed air. PMID:18407937

  14. Furniture Firm Van Den Berghe-Pauvers: Fully-fledged Partner in the Postwar Promotion of Modern Design in Belgium

    NARCIS (Netherlands)

    Flore, F.M.W.

    2013-01-01

    After the Second World War, the Belgian furniture industry responded slowly to the international developments in the field of modern design. For many years, it remained largely focused on the use of solid wood, traditional craftsmanship, and the production of "style furniture" - a term that refers

  15. Furniture wood wastes: Experimental property characterisation and burning tests

    International Nuclear Information System (INIS)

    Tatano, Fabio; Barbadoro, Luca; Mangani, Giovanna; Pretelli, Silvia; Tombari, Lucia; Mangani, Filippo

    2009-01-01

    Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected 'raw' and primarily 'engineered' ('composite') wood wastes. The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in 'engineered' wood wastes as compared with 'raw' wood wastes; and relatively high energy content values of 'engineered' wood wastes (ranging on the whole from 3675 to 5105 kcal kg -1 for HHV, and from 3304 to 4634 kcal kg -1 for LHV). The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in 'engineered' wood burning tests of pyrroles and amines, as well as the additional presence (as compared with 'raw' wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon. Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in 'engineered' wood burning tests as compared with 'raw' wood burning test; and considerable generation of the respirable PM 1 fraction during incomplete industrial wood burning.

  16. Cleaner Production Applied in a Small Furniture Industry in Brazil: Addressing Focused Changes in Design to Reduce Waste

    Directory of Open Access Journals (Sweden)

    Carlos Mario Gutiérrez Aguilar

    2017-10-01

    Full Text Available The wood industry is known for being among the biggest resource consumers, having a relatively low yield. The wood furniture industry as part of the wood industry also remains a big generator of residues and a big consumer of resources. Diverse solutions and technologies have been developed to deal with the residues generated, but those technologies are mostly applied at the end of the production chain with limited results. Cleaner production represents a program based on continuous strategies applied to a more sustainable use of materials and energy, minimizing waste and pollution. This paper presents a case study of a cleaner production program developed in a small furniture industry in Salvador de Bahia, Brazil, applying the concepts of cleaner production with parameters of ecodesign developed for the furniture industry. The object of study was the production of a wooden chair made from eucalyptus wood. The application of the cleaner production program and ecodesign parameters allowed a detailed characterization of the waste, resulting in opportunities for a reduction of the use of raw material by 30%, a reduction in waste by 49% and allowing a reduction in energy by 36% due to simplification of the productive process. Among the strategies applied were reshaping pieces, redesigning, and the substitution of materials. The results suggest that despite the existence of more complex environmental methods and approaches, the application of cleaner production plus ecodesign parameters could be more achievable for micro and small furniture industries.

  17. Analysis of ergonomic furniture made of wood and sub-products from renewable forests.

    Science.gov (United States)

    de Oliveira, Luciana Aparecida; de Souza, Amaury Paulo; Fialho, Patrícia Bhering; Minette, Luciano José; de Torres, Fernanda Freitas Costa

    2012-01-01

    The furniture ergonomic evaluation was carried out through the use of questionnaires and forms in industries. For the ergonomic product analysis, it was used the methodology "Object Ergonomics - Ergonomic System Technical Reading" (design goals and management actions), and measurements of products. The values achieved were compared with the standard dimensions, and the compliance or non-compliance of the furniture to it was assessed. In relation to the dimensions of the bed, the following variables did not comply with the norms: external and internal length, external and internal width, height and width of the sidebar and distance to the floor. The dimensions of these variables were above the recommended values. The double bed was inadequate for management actions and maintenance. Since the kitchen cabinet is a product that went through physical testing and follows national standards; the finish used is powder coating. The kitchen cabinet proved to be appropriate in all design requirements and for management actions. Both furniture pieces were inadequate, considering the difficulty for maintenance when a product or part of it was damaged. It was recommended the creation of regulatory standards for the production of safe and comfortable furniture.

  18. Characteristics and availability of commercially important woods

    Science.gov (United States)

    Regis B. Miller

    1999-01-01

    Throughout history, the unique characteristics and comparative abundance of wood have made it a natural material for homes and other structures, furniture, tools, vehicles, and decorative objects. Today, for the same reasons, wood is prized for a multitude of uses. All wood is composed of cellulose, lignin, hemicelluloses, and minor amounts (5% to 10%) of extraneous...

  19. Knot detection in X-ray images of wood planks using dictionary learning

    DEFF Research Database (Denmark)

    Hansson, Nils Mattias; Enescu, Alexandru; Brandt, Sami Sebastian

    2015-01-01

    This paper considers a novel application of x-ray imaging of planks, for the purpose of detecting knots in high quality furniture wood. X-ray imaging allows the detection of knots invisible from the surface to conventional cameras. Our approach is based on texture analysis, or more specifically, ......, discriminative dictionary learning. Experiments show that the knot detection and segmentation can be accurately performed by our approach. This is a promising result and can be directly applied in industrial processing of furniture wood.......This paper considers a novel application of x-ray imaging of planks, for the purpose of detecting knots in high quality furniture wood. X-ray imaging allows the detection of knots invisible from the surface to conventional cameras. Our approach is based on texture analysis, or more specifically...

  20. Multilevel model of safety climate for furniture industries.

    Science.gov (United States)

    Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

    2015-01-01

    Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

  1. Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species.

    Science.gov (United States)

    David Nicholls; Matthew Bumgardner

    2007-01-01

    This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

  2. Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species

    Science.gov (United States)

    David Nicholls; Matthew Bumgardner

    2007-01-01

    This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

  3. Spatial and temporal price variations of sawn wood utilized for ...

    African Journals Online (AJOL)

    O Y Ogunsanwo

    UTILIZED FOR FURNITURE MAKING IN SELECTED CITIES IN NIGERIA ... 193 furniture factories comprising of 154 small, 28 medium and 11 large scale were selected in ... recommended that suitable policies that will ensure market integration through proper ..... Organized by the African Network for Wood Reaserch and.

  4. Foreign subsidiary development of furniture industry in the context of global recession: case of Vietnam

    OpenAIRE

    Hoang, Ngoc

    2014-01-01

    Wooden furniture industry is a traditional low-technology based and labor intensive industry (Kaplinsky & Readman, 2000), which is highly recommended for global outsourcing. Besides, the raising of “China plus one” manufacturing strategy made Southeast Asian countries became new investment destinations. In case of Vietnam, the largest exporter of wood products in Southeast Asian, wooden furniture industry is highly export-oriented with a fast growing rate especially since 2008 (MARD, 2012). W...

  5. Jepara Indonesia Furniture

    OpenAIRE

    romanzick

    2016-01-01

    Jepara Indonesia Furniture A wide choice of Indonesian furniture companies provide free business listings to all types of furniture also for outlets and stores. Each section is accessible that contains a comprehensive list of our range of furniture details information and full campaign. We provided a platform create various products along with featured inspiration section related products, services, accessories. Indonesia Furniture Teak Garden Furniture It is bringing customers distinctive as...

  6. Adopters and non-adopters of wood pellet heating in Norwegian households

    International Nuclear Information System (INIS)

    Sopha, Bertha Maya; Hertwich, Edgar G.; Kloeckner, Christian A.

    2011-01-01

    The aim of the present paper is to understand the differences between adopters and non-adopters of wood pellet heating in Norwegian households by comparing the two groups with regard to key points of adoption. A mail survey of 669 adopters and 291 non-adopters of wood pellet heating was conducted in 2008. Results indicate that there are significant differences between groups with respect to socio-demographic factors, decision-related factors, heating systems adopted and reasons for shifting heating systems. The results also indicate that the adopter group shows characteristics of early adopters, whereas the non-adopter group has characteristics of late adopters. The results for levels of income and education contradict what would be predicted from theory, however. Both groups show no significant difference with respect to values, but the perception of which heating system is the most environmentally friendly differs significantly. The top three reasons cited by the adopter group for installing wood pellet heating are getting an environmentally friendly heating system, low operation costs and an anticipated increase in electricity prices. According to the non-adopter group, the main barriers to adoption are high installation costs, followed by the difficulties of refitting the house for wood pellet heating. A higher subsidy (i.e., an average of 64% of the total installation cost) rather than the current subsidy of up to 20% was required by the non-adopter group to switch to wood pellet heating. (author)

  7. Wood fuels utilization in Central Europe - the wood fuels consumption and the targets of utilization

    International Nuclear Information System (INIS)

    Alakangas, E.

    1999-01-01

    Following subjects are discussed in this presentation: The share of bioenergy of the total energy consumption in EU region; the wood fuels consumption in EU region in 1995; the division of bioenergy utilization (households, wood- based district heating, wood consumption in industry, power generation from wood and residues, biofuels, biogas and sludges); wood fuels consumption in households in EU countries in 1995; wood consumption in France; the additional wood fuel consumption potential in France; Blan bois - wood energy program; French wood energy markets; German wood energy markets; energy consumption in Germany; wood consumption in Bavaria; the wood fuels potential in Bavaria; wood fuels consumption in households in Bavaria; wood fuels consumption for district heating in Bavaria; fuel prices in Bavaria; Environmental regulations in Germany; small boiler markets in Germany; Energy consumption in Austria; small-scale utilization of wood fuels; utilization of wood energy. (Slides, additional information from the author)

  8. Gluebond strength of laser cut wood

    Science.gov (United States)

    Charles W. McMillin; Henry A. Huber

    1985-01-01

    The degree of strength loss when gluing laser cut wood as compared to conventionally sawn wood and the amount of additional surface treatment needed to improve bond quality were assessed under normal furniture plant operating conditions. The strength of laser cut oak glued with polyvinyl acetate adhesive was reduced to 75 percent of sawn joints and gum was reduced 43...

  9. A national cross-sectional study in the Danish wood and furniture industry on working postures and manual materials handling.

    Science.gov (United States)

    Christensen, H; Pedersen, M B; Sjøgaard, G

    1995-04-01

    Musculoskeletal disorders constitute a major problem in the wood and furniture industry and identification of risk factors is needed urgently. Therefore, exposures to different work tasks and variation in the job were recorded based on an observation survey in combination with an interview among 281 employees working in wood working and painting departments. A questionnaire survey confirmed high frequencies of symptoms from the musculoskeletal system: The one-year prevalence of symptoms from the low back was 42% and symptoms from the neck/shoulder was 40%. The exposure was evaluated based on: (1) classification of work tasks, (2) work cycle time, (3) manual materials handling, (4) working postures, and (5) variation in the job. Among the employees 47% performed feeding or clearing of machines, 35% performed wood working or painting materials, and 18% performed various other operations. Among the employees 20% had no variation in their job while 44% had little variation. Manual materials handling of 375 different burdens was observed, which most often occurred during feeding or clearing of machines. The weight of burdens lifted was 0.5-87.0 kg, where 2% had a weight of more than 50 kg. Among the lifting conditions 30% were evaluated as implying a risk of injury. An additional risk factor was the high total tonnage lifted per day, which was estimated to range from 132 kg to 58,800 kg. Working postures implied a risk of injury due to prolonged forward and lateral flexions of the neck, which was seen most frequently during wood working or painting materials. These data substantiate the finding that work tasks mainly during feeding or clearing of machines imply a risk of injury to the low back and a risk of injury to the neck and shoulder area mainly during wood working or painting materials. Optimal strategies for job redesign may be worked out by using these data in order to prevent occupational musculoskeletal disorders.

  10. Immunoglobulin E-mediated sensitization to pine and beech dust in relation to wood dust exposure levels and respiratory symptoms in the furniture industry.

    Science.gov (United States)

    Schlünssen, Vivi; Kespohl, Sabine; Jacobsen, Gitte; Raulf-Heimsoth, Monika; Schaumburg, Inger; Sigsgaard, Torben

    2011-03-01

    Wood dust exposure may cause Immunoglobulin E (IgE)-mediated allergic diseases. Our objectives were to estimate pine and beech dust sensitization rates among woodworkers and a reference group, explore the association between exposure and sensitization and between sensitization and respiratory symptoms, and finally investigate the impact of proteinogenic specific IgE (sIgE) epitopes on respiratory symptoms. In a Danish study among 52 furniture factories and 2 reference factories, we evaluated the workers' asthma and rhinitis status using questionnaires and blood samples collected from 1506 woodworkers and 195 references. Workers with asthma symptoms (N=298), a random study sample (N=399) and a random rhinitis sample (N=100) were evaluated for IgE-mediated sensitization to pine and beech dust. The prevalence of pine and beech sensitization among current woodworkers was 1.7 and 3.1%, respectively. No differences in sensitization rates were found between woodworkers and references, but the prevalence of wood dust sensitization was dose-dependently associated with the current level of wood dust exposure. No relation was observed between wood dust sensitization per se and respiratory symptoms. Only symptomatic subjects had proteinogenic IgE epitopes to pine. Increased odds ratios for sIgE based on proteinogenic epitopes to beech and respiratory symptoms were found, although they were not statistically significant. Sensitization rates to pine and beech were the same for woodworkers and references but dependent on the current wood dust exposure level. The importance of beech and pine wood sensitization is limited, but may be of clinical significance for a few workers if the IgE epitopes are proteinogenic.

  11. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry

    Science.gov (United States)

    Black, A.; Evans, J. C.; Hadfield, Esme H.; Macbeth, R. G.; Morgan, A.; Walsh, M.

    1974-01-01

    Black, A., Evans, J. C., Hadfield, Esme H., Macbeth, R. G., Morgan, A., and Walsh, M. (1974).British Journal of Industrial Medicine,31, 10-17. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry. Measurements of mucociliary clearance from the anterior end of the middle turbinate were made using technetium-99m-labelled particles in nine woodworkers from the furniture industry and in 12 controls, none of whom had been occupationally exposed to wood dust. Clearance rates in the controls ranged from 1·9 to 18·5 mm min-1 with a mean of 6·8. These values are in good agreement with measurements reported elsewhere for normal subjects. Only one of the woodworkers had a clearance rate which fell within the normal range and he had been occupationally exposed for the shortest period (6 years). In four woodworkers clearance was very slow (furniture industry for more than 10 years. PMID:4821406

  12. Rural wood consumption patterns of local and immigrant households with differentiated access to resources in Xishuangbanna, Yunnan, China

    International Nuclear Information System (INIS)

    Mertens, Charlotte Filt; Bruun, Thilde Bech; Schmidt-Vogt, Dietrich; He, Jun; Neergaard, Andreas de

    2015-01-01

    In Xishuangbanna, China, rubber production has spread rapidly, resulting in extensive land use changes and an increasing influx of migrant workers who have come to find work on the plantations. These migrant workers have limited access to subsidies and the local collective forest due to the household registration system in China called hukou. To assess how these policy-based restrictions on access affect wood consumption and local communities, a case study was conducted in Manlin village, Xishuangbanna, undertaking a household and weight survey with local and immigrant households. The results show no significant difference in firewood consumption between the subpopulations, despite predominantly more local than immigrant households have access to subsidised alternative energy sources. On the other hand, limited access to the collective forest is found to influence the choice of housing materials and living standards in immigrant households as they cannot access timber or afford brick houses. This paper highlights rural issues connected to the hukou system and suggests that rural energy and resource policies should take the growing population of immigrant workers into consideration in future to expand the reach of the polices to the de facto and not only de jure rural population and thus optimise policy efficiency. - Highlights: • The hukou system directly affects rural wood access and consumption. • Immigrant households have little or no access to timber. • Registration status does not have a significant effect on firewood consumption. • Excluding immigrant households will limit policy outreach and efficiency

  13. Physical and chemical evaluation of furniture waste briquettes

    OpenAIRE

    Moreno Caballero, Ana Isabel; Font, Rafael; Conesa, Juan A.

    2016-01-01

    Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified m...

  14. Furniture design

    CERN Document Server

    Smardzewski, Jerzy

    2015-01-01

    Maximizing reader insights into the principles of designing furniture as wooden structures, this book discusses issues related to the history of furniture structures, their classification and characteristics, ergonomic approaches to anthropometric requirements and safety of use. It presents key methods and highlights common errors in designing the characteristics of the materials, components, joints and structures, as well as looking at the challenges regarding developing associated design documentation. Including analysis of how designers may go about calculating the stiffness and endurance of parts, joints and whole structures, the book analyzes questions regarding the loss of furniture stability and the resulting threats to health of the user, putting forward a concept of furniture design as an engineering processes. Creating an attractive, functional, ergonomic and safe piece of furniture is not only the fruit of the work of individual architects and artists, but requires an effort of many people working ...

  15. P.E.I. wood fuel survey, 1990-91

    International Nuclear Information System (INIS)

    1991-04-01

    In 1991 a wood fuel survey of 450 randomly selected households, representing 1% of the total number of households in Prince Edward Island, was conducted. The survey indicated that 49.8% of the households burned wood, up from 42.1% of households in the 1988-1989 survey. The wood burning households consumed an average of 4.92 cords of wood, consistent with the 4.90 cords in the 1989 survey. The total residential wood consumption was estimated at ca 100,377 cords, an increase from the 89,000 cords used in 1988-89. Wood cutters represented 23.4% of respondents, with buyers representing 25.4% of respondents. The wood burning appliances used by the respondents were: airtight wood stove 39.9%, wood furnace 22.5%, kitchen wood stove 15.7%, combined wood/oil furnace 8.9%, Franklin/non-airtight 4.4%, Kemac unit 4.4%, fireplace insert 3.1%, and open fireplace 1%. The most frequent response among rural wood users cited price as an advantage of wood fuel, while the most frequent response of urban users cited the quality of the heat. 9 figs., 47 tabs

  16. 78 FR 13626 - Wooden Bedroom Furniture From the People's Republic of China: Initiation of Administrative Review

    Science.gov (United States)

    2013-02-28

    .... Shanghai Fangjia Industry Co., Ltd.... No. Shanghai Hospitality Product Mfg., No. Co., Ltd. Shanghai... Co., Ltd., Artwork Metal & Plastic Co., Ltd., Jibson Industries Ltd., Always Loyal International.... Taicang Sunrise Wood Industry Co., Ltd., Taicang Fairmount Designs Furniture Co., Ltd., Meizhou Sunrise...

  17. Personal exposure to wood dust among workers in NekaChoob factory in 2013

    Directory of Open Access Journals (Sweden)

    Mahmoud Mohammadyan

    2014-12-01

    Full Text Available Background and Purpose: Inhalation of hardwood dust may produce a range of adverse health effects in the upper and lower respiratory system, including asthma, along with Sino-nasal cancer and nasopharyngeal cancer. This study was carried out to evaluate personal exposure to wood dust among workers in chipboard and furniture production saloons in Neka Choob factory, Iran. Materials and Methods: Gravimetric method No. 0500 recommended by National Institute for Occupational Safety and Health was used to determine the wood dust concentrations in the workers’ breathing zone. The sampling air was drawn through a polyvinyl chloride filter within the breathing zone, using a calibrated personal sampling pump. Results: The mean workers’ personal exposure to wood dust in furniture production saloon (2.87 ± 1.95 mgm-3 was higher than mean exposure of workers whom were working in chipboard saloon (0.93 ± 0.35 mgm-3. The mean workers’ exposure to wood dust for both saloons was 1.70 ± 1.53 mgm-3. Conclusion: The mean workers’ personal exposure to wood dust in Neka Choob factory was higher than Occupational Exposure Limit (OEL recommended by national (Iranian Committee for Review and Collection of OEL and European ::union:: Scientific Committee on OEL committees. All workers in furniture production saloon and three workers in chipboard saloon have a mean exposure higher than OEL.

  18. A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

    Directory of Open Access Journals (Sweden)

    Siti Suhaily,

    2012-07-01

    Full Text Available This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and technology. This research also discusses the need for biocomposite materials that do not depend on the growth of populations, but on the growth and development of the economy. This study focuses on globally available agro-based biocomposites, especially those from oil palm biomass: plywood, medium density fiberboard (MDF, wood plastic composite (WPC, laminated veneer lumber (LVL, oriented strand board (OSB, hardboards, and particleboard. Additional positive aspects of biocomposites are their environmentally friendly character, high quality, competitive design, and capacity to improve the value proposition of high-end products. These attributes increase the demand for agro-based biocomposite furniture on the international market.

  19. [The application of two occupation health risk assessment models in a wooden furniture manufacturing industry].

    Science.gov (United States)

    Wang, A H; Leng, P B; Bian, G L; Li, X H; Mao, G C; Zhang, M B

    2016-10-20

    Objective: To explore the applicability of 2 different models of occupational health risk assessment in wooden furniture manufacturing industry. Methods: American EPA inhalation risk model and ICMM model of occupational health risk assessment were conducted to assess occupational health risk in a small wooden furniture enterprises, respectively. Results: There was poor protective measure and equipment of occupational disease in the plant. The concentration of wood dust in the air of two workshops was over occupational exposure limit (OEL) , and the C TWA was 8.9 mg/m 3 and 3.6 mg/m 3 , respectively. According to EPA model, the workers who exposed to benzene in this plant had high risk (9.7×10 -6 ~34.3×10 -6 ) of leukemia, and who exposed to formaldehyde had high risk (11.4 × 10 -6 ) of squamous cell carcinoma. There were inconsistent evaluation results using the ICMM tools of standard-based matrix and calculated risk rating. There were very high risks to be attacked by rhinocarcinoma of the workers who exposed to wood dust for the tool of calculated risk rating, while high risk for the tool of standard-based matrix. For the workers who exposed to noise, risk of noise-induced deafness was unacceptable and medium risk using two tools, respectively. Conclusion: Both EPA model and ICMM model can appropriately predict and assessthe occupational health risk in wooden furniture manufactory, ICMM due to the relatively simple operation, easy evaluation parameters, assessment of occupational - disease - inductive factors comprehensively, and more suitable for wooden furniture production enterprise.

  20. 75 FR 9869 - Initiation of Administrative Review of the Antidumping Duty Order on Wooden Bedroom Furniture...

    Science.gov (United States)

    2010-03-04

    ... Plastic Co., Ltd.,* Jibson Industries, Ltd.,* Always Loyal International * Baigou Crafts Factory of... Faith Limited * Brother Furniture Manufacture Co., Ltd. * C.F. Kent Co., Inc. C.F. Kent Hospitality, Inc... Company Limited * Dongguan Chunsan Wood Products Co., Ltd.,* Trendex Industries Ltd.* [[Page 9872...

  1. Sweetgum - an American wood

    Science.gov (United States)

    C. B. Briscoe

    1973-01-01

    Sweetgum grows throughout most of the eastern United States and sporadically throughout Mexico and Central America. The wood is moderately heavy, even-textured, and it machines moderately well. It is used for a variety of purposes, with furniture, plywood, containers, and pulp absorbing the most volume. Growth is good, but supplies are slowly diminishing because the...

  2. Kesiapan Produsen Mebel di Jepara dalam Menghadapi Sertifikasi Ekolabel (Readiness in Jepara Furniture Manufacturers in Confront of Ecolabel Certification

    Directory of Open Access Journals (Sweden)

    Herry Purnomo

    2012-01-01

    Full Text Available Furniture is a big 4 of Indonesia’s export commodities with palm oil, textiles, and rubber outside the oil and gas.Value-added is enjoyed by tens of millions of people involved in the value chain. But, the business is experiencingsevere challenges to the issue of certification and forest products (green or certified furniture and the scarcityof wood. Certified furniture is intended for preservation of forest resources, the healthy processing of furnituremaking as well as improving the welfare of artisans. From the supply side of certified furniture, large producershave been prepared while small producers are not ready. From the demand side, domestic consumers only wantto pay less for certified furniture, while British and Norway consumers are 16% 7.5% respectively. The increasein willingness to pay is lower than the certified furniture prices increased between 6–30%., Certification can bedone by a third party accredited by the Tropical Forest Trust (TFT, Indonesian Ecolabel Institute (LEI, orForest Stewardship Council (FSC. When the increase in production costs are higher than the desire of consumersto pay, then the certified furniture becomes difficult to be realized. Need specific strategies to market certifiedfurniture. This article is a case study in Jepara furniture craftsmen who accounted for 10% of national exports.Keywords: furniture certified, certification, forests, supply, demand, Jepara

  3. Forest biomass flow for fuel wood, fodder and timber security among tribal communities of Jharkhand.

    Science.gov (United States)

    Islam, M A; Quli, S M S; Rai, R; Ali, Angrej; Gangoo, S A

    2015-01-01

    The study investigated extraction and consumption pattern of fuel wood, fodder and timber and forest biomass flow for fuel wood, fodder and timber security among tribal communities in Bundu block of Ranchi district in Jharkhand (India). The study is based on personal interviews of the selected respondents through structured interview schedule, personal observations and participatory rural appraisal tools i.e. key informant interviews and focus group discussions carried out in the sample villages, using multi-stage random sampling technique. The study revealed that the total extraction of fuel wood from different sources in villages was 2978.40 tons annum(-1), at the rate of 0.68 tons per capita annum(-1), which was mostly consumed in cooking followed by cottage industries, heating, community functions and others. The average fodder requirement per household was around 47.77 kg day(-1) with a total requirement of 14227.34 tons annum(-1). The average timber requirement per household was computed to be 0.346 m3 annum(-1) accounting for a total timber demand of 282.49 m3 annum(-1), which is mostly utilized in housing, followed by agricultural implements, rural furniture, carts and carriages, fencing, cattle shed/ store house and others. Forest biomass is the major source of fuel wood, fodder and timber for the primitive societies of the area contributing 1533.28 tons annum(-1) (51.48%) of the total fuel wood requirement, 6971.55 tons annum(-1) (49.00%) of the total fodder requirement and 136.36 m3 annum(-1) (48.27%) of the total timber requirement. The forest biomass is exposed to enormous pressure for securing the needs by the aboriginal people, posing great threat to biodiversity and environment of the region. Therefore, forest biomass conservation through intervention of alternative avenues is imperative to keep pace with the current development and future challenges in the area.

  4. Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP

    Directory of Open Access Journals (Sweden)

    Hasan Alizadeh

    2014-11-01

    Full Text Available Furniture industry is one of the most important employment and wealth productive industries, and also one major category in developing countries. This study aimed on determining the effective indices on export development of office furniture throughout the analytical hierarchy process (AHP and also by group decision. For this, imports and exports of office furniture were determined through visiting the custom office of Islamic Republic of Iran. By then, after initial studies, furniture industry and relevant experts were interviewed to recognize the effective indices on export development, and specified indices were categorized on six main groups and forty-eight sub-index. After receiving the comments of experts, degree of importance of indices and sub-indices determined thereby Expert Choice software. Results showed that raw material and product has been chosen among the major indices. Among the 48 influential sub-indices also product designing, guaranty and costumer services, quality control, custom tariffs, and strategic marketing had highest value-weighted priorities in export development of office furniture, respectively. Regarding to government’s policies and decisions in wood raw materials extent, monetary and banking system and marketing infrastructures, to maintain the productivity competitiveness of Iran’s furniture industry in first step, and to achieve to the export markets in second step, full cooperation of government with furniture industry is necessary provision for participating of this industry in global markets.

  5. Predictors of monoterpene exposure in the Danish furniture industry.

    Science.gov (United States)

    Hagström, Katja; Jacobsen, Gitte; Sigsgaard, Torben; Schaumburg, Inger; Erlandsen, Mogens; Schlunssen, Vivi

    2012-04-01

    Individuals who work with pine in the furniture industry may be exposed to monoterpenes, the most abundant of which are α-pinene, β-pinene, and Δ(3)-carene. Monoterpenes are suspected to cause dermatitis and to harm the respiratory system. An understanding of the predictors of monoterpene exposure is therefore important in preventing these adverse effects. These predictors may include general characteristics of the work environment and specific work operations. We sought to assess the extent to which workers are exposed to monoterpenes and to identify possible predictors of monoterpene exposure in the pine furniture industry in Denmark. Passive measurements of the levels of selected monoterpenes (α-pinene, β-pinene, and Δ(3)-carene) were performed on 161 subjects from 17 pine furniture factories in Viborg County, Denmark; one sample was acquired from each worker. Additionally, wood dust samples were collected from 145 workers. Data on potential predictors of exposure were acquired over the course of the day on which the exposure measurements were recorded and could be assigned to one of four hierarchic ordered levels: worker, machine, department, and factory. In addition to univariate analyses, a mixed model was used to account for imbalances within the data and random variation with each of the hierarchically ordered levels. The geometric mean (GM) monoterpene content observed over the 161 measurements was 7.8 mg m(-3) [geometric standard deviation (GSD): 2.4]; the GM wood dust level over 145 measurements was 0.58 mg m(-3) (GSD: 1.49). None of the measured samples exceeded the occupational exposure limit for terpenes in Denmark (25 ppm, 150 mg m(-3)). In the univariate analyses, half of the predictors tested were found to be significant; the multivariate model indicated that only three of the potential predictors were significant. These were the recirculation of air in rooms used for the processing of wood (a factory level predictor), the presence of a

  6. 76 FR 54794 - Klaussner Furniture Industries, Inc., Plant #3, Asheboro, NC; Klaussner Furniture Industries, Inc...

    Science.gov (United States)

    2011-09-02

    ...,989B] Klaussner Furniture Industries, Inc., Plant 3, Asheboro, NC; Klaussner Furniture Industries, Inc... of Klaussner Furniture Industries, Inc., Milford, IA; Amended Certification Regarding Eligibility To... Industries, Inc., Plant 3, Asheboro, North Carolina (TA-W- 70,989) and Klaussner Furniture Industries, Inc...

  7. STUDY ABOUT A FURNITURE COMPANY THAT USES NEW TECHNOLOGIES AND COMPUTERIZED EQUIPMENT

    Directory of Open Access Journals (Sweden)

    PUSTIANU Monica

    2015-05-01

    Full Text Available In Romania, there are companies that uses new technologies and computerized equipment leading to obtaining high quality products and profit. Furniture industry has continuously developed due to high demand for diversified products for all age groups. Romanian goods shall be delivered both in the country and abroad. The tapestries furniture made in our country, classical or modern, by leather in different colours or with textile coating materials fashionable chosen is already enjoying much attention from the external and internal customers. The workforce employed in the furniture manufacturing industry is qualified, managed to shape the wood into complex and elegant products that are able to give full satisfaction to all consumers SWOT analysis is defined as a complex research of economic aspects, technical, sociological, legal and managerial aspects that characterize the activity of a company and allows the formulation of an opinion on the past and present condition of the company. SWOT analysis may be carried out both at the level of functional areas of the company: financial, commercial, production, human resources, research and development, management and at the level of firm as a whole. By this analysis was obtained a clear picture of the current state of the analysed company, helping to knowledge and understanding of the general context in which the company operates. Key words: quality, furniture, management, production, analysis, SWOT

  8. Psychological factors in the diffusion of sustainable technology: a study of Norwegian households' adoption of wood pellet heating

    Energy Technology Data Exchange (ETDEWEB)

    Sopha, Bertha Maya; Kloeckner, Christian A.

    2010-07-01

    Full text: This paper aims to understand the determinants of the adoption of wood pellet technology for home heating to identify possible strategies towards the slow diffusion of wood pellet in Norway. A mail survey of 737 Norwegian households was conducted in 2008, involving wood pellet adopters and non wood pellet adopters as respondents. An integrated model combining psychological factors (such as intentions, attitudes, perceived behavioral control, habits and norms), perceived wood pellet heating characteristics, and ecological and basic values is applied to predict the installation of a wood pellet stove retrospectively. Results from a path analysis gain empirical support for the proposed integrated model. Wood pellet heating adoption is mainly predicted by a deliberate decision process starting with the evaluation of heating system characteristics, mediated by attitudes and intentions. Perceived behavioural control and habits pose relevant barriers to the adoption process. The influence of norms and values are indirect and only minor in the given market conditions. The most important heating system characteristics in the analysis were perceived functional reliability and perceived installation and maintenance costs. Possible intervention strategies to speed up wood pellet adoption in Norway are discussed in the last part of the paper. (Author)

  9. Evaluation of various fire retardants for use in wood flour--polyethylene composites

    Science.gov (United States)

    Nicole M. Stark; Robert H. White; Scott A. Mueller; Tim A. Osswald

    2010-01-01

    Wood-plastic composites represent a growing class of materials used by the residential construction industry and the furniture industry. For some applications in these industries, the fire performance of the material must be known, and in some cases improved. However, the fire performance of wood-plastic composites is not well understood, and there is little...

  10. Potential Co-Generation of Electrical Energy from Mill Waste: A Case Study of the Malaysian Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2016-04-01

    Full Text Available Furniture manufacturing in Malaysia is an established industry driven primarily by the availability of raw materials and labor. However, the industry suffers from the low-recovery rate of its materials, as it produces a substantial amount of waste during the manufacturing process. Although smaller waste fragments, or off-cuts, are recovered for other purposes, the splinters, shavings, and coarse dust have little economic value and are often discarded. Because wood is a well-established source of bioenergy, this study investigated the potential use of mill waste from the furniture-manufacturing industry for electrical energy generation. Waste from the rubberwood, bamboo, and rattan furniture industries was evaluated for its potential electrical energy generation, and the amount was compared with the electrical energy that was consumed by the furniture industry. The study also compared the emission of greenhouse gases from the combustion of these waste materials against fossil fuels used to generate electricity to assess its potential in terms of the environmental benefits. In conclusion, such mill waste could be utilized as substitute for fossil fuel to generate energy in the furniture industry.

  11. Durability of wood-plastic composite lumber

    Science.gov (United States)

    Rebecca E. Ibach

    2010-01-01

    Wood-plastic composite (WPC) lumber has been marketed as a low-maintenance, high-durability product. Retail sales in the United States were slightly less than $1 billion in 2008. Applications include docking, railing, windows, doors, fencing, siding, moldings, landscape timbers, car interior parts, and furniture. The majority of these products are used outdoors and...

  12. IMPACTS OF DIFFERENT JOINT ANGLES AND ADHESIVES ON DIAGONAL TENSION PERFORMANCES OF BOX-TYPE FURNITURE

    Directory of Open Access Journals (Sweden)

    Musa Atar

    2010-02-01

    Full Text Available The goal of this study was to determine the effects of different joint angles and adhesives on diagonal tension performances of the box-type furniture made from solid wood and medium density fiberboard (MDF. After drilling joints of 75º, 78º, 81º, 84º, and 87º degrees on Oriental beech, European oak, Scotch pine, and MDF samples, a diagonal tensile test was applied on corners glued with polyvinyl acetate (PVAc and polyurethane (D-VTKA = Desmodur-Vinyl Trieketonol Acetate according to ASTM D 1037 standard. With reference to the obtained results, the highest tensile strength was obtained in European oak with PVAc glue and joint angle of 84º, while the lowest value was obtained in MDF with D-VTKA glue and joint angle of 75º. Considering the interaction of wood, adhesive, and joint angle, the highest tensile strength was obtained in European oak with joint angle of 81º and D-VTKA glue (1.089 N.mm-2, whereas the lowest tensile strength was determined in MDF with joint angle of 75º and PVAc glue (0.163 N.mm-2. Therefore, PVAc as glue and 81º as joint angle could be suggested to obtain some advantageous on the dovetail joint process for box-type furniture made from both solid wood and MDF.

  13. Domestic competitiveness in secondary wood industries

    Science.gov (United States)

    Matthew Bumgardner; Urs Buehlmann; Albert Schuler; Rich Christianson

    2004-01-01

    As imports capture a substantial portion of the domestic wood furniture market, there is much speculation and concern as to the future of this and related industries. This study sought to obtain an industry perspective of trends in domestic manufacturing and importing, and to identify factors that might enhance domestic competitiveness. A mail survey was conducted...

  14. 41 CFR 101-26.505-2 - Description of office and household furnishings.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Description of office and household furnishings. 101-26.505-2 Section 101-26.505-2 Public Contracts and Property Management Federal... household furnishings. (a) Office furnishings are articles which supplement office furniture and augment the...

  15. Investigating the Effective Index on Customers Choice in Buying Furniture

    Directory of Open Access Journals (Sweden)

    Hossein Rangavar

    2014-05-01

    Full Text Available The competitive world today, with increasing customers satisfaction and expanding the definition of hosting and its direct connection with quality of products is essential. Thus not only the current customers stay fixed but also it increases. The purpose of this study was to investigate and ranking the crucial indicators that influence the choice of furniture by customers. Because of this, the studied indexes are classified in 6 group: quality, beauty, design, creating a suitable atmosphere for selling the goods, selling conditions and advertising. Population consisted of three major commercial areas in Tehran (Delawaran, Hassan Abad and Yaftabad. Statistical sample consisted a number of 100 people. A questionnaire was developed to gather data. Reliability of the questionnaires has been approved through Cronbach's Alpha coefficient (0.921. Investigation of effective indexes was done by chi-square method and in order to final ranking the indexes, friedman analyses have been used. The results obtained of ranking showed the chief factor in customers choice is under category of beauty due to this elegancy role in customers point of view. After elegancy, according to the classified elements studied in this research, raw material in making furniture, wood production’s price, ergonomy, customers satisfaction for his last purchase and immediate delivery, respectively, are the most important effective index in buying furniture by consumer.

  16. AESTHETICS APPRECIATION OF WOOD COLOUR AND PATTERNS BY COLORIMETRY: PART 1. COLORIMETRY THEORY FOR THE CIELAB SYSTEM

    OpenAIRE

    Janin, Gérard; Goncalez, Joaquim; Ananías, Rubén; Charrier, Bertrand; Fernandes da Silva, Gilson; Dilem, Abdelkader

    2001-01-01

    The colorimetry theory for the CIELab system today allows us to compute the chromatic coordinates of the raw timber colour along the wood - chain industry. The wood industry is nd strongly behind in such areas. Progress in the wood appearance description by means of colour and pattern characteristics would be suitable to classify the wood. It would also help to match pieces of wood in furniture and inside the houses, to study the wood colour change in wood ageing by photodecoloration or by dr...

  17. Whither North Carolina furniture manufacturing?

    OpenAIRE

    Robert L. Lacy

    2004-01-01

    North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

  18. Progressive technologies in furniture design

    OpenAIRE

    Šebková, Martina

    2014-01-01

    Šebková, M. Progressive technologies in furniture design. Diploma thesis, Brno, Mendel University in Brno, 2014 Diploma thesis 'Progressive technologies in furniture design' is focused on the use of modern technologies in furniture production. The theoretical part explains the basic terms, technology and material options. It focuses mainly on the production of 3D printed furniture and possibilities of virtual testing, measurements, scanning and rapid prototyping. Practical part of diploma the...

  19. The ABCs of Cost Allocation in the Wood Products Industry: Applications in the Furniture Industry

    OpenAIRE

    Quesada-Pineda, Henry J.

    2010-01-01

    Discusses the basics of cost accounting and explains the strengths and weaknesses of two cost accounting techniques - the direct method and the activity-based costing method - using simple examples and applications to the furniture industry.

  20. Developments in undergraduate wood science education at Stellenbosch University, South Africa

    OpenAIRE

    Rypstra,Tim

    2011-01-01

    In South Africa, Stellenbosch University (SU) is the designated provider of Bachelor, Master and Doctorate level qualifications in Forestry and Wood Products Science. SU provides educational programs to both mechanical (sawmilling, preservation, composite products, furniture, etc.) and the chemical (pulp & paper) processing sectors. To ensure academic quality, SU regularly has her academic programs assessed externally. In 2000, several changes to the then existing 4 year B.Sc. Wood Scienc...

  1. Wood-related occupations, wood dust exposure, and sinonasal cancer.

    Science.gov (United States)

    Hayes, R B; Gerin, M; Raatgever, J W; de Bruyn, A

    1986-10-01

    A case-control study was conducted to examine the relations between type of woodworking and the extent of wood dust exposure to the risks for specific histologic types of sinonasal cancer. In cooperation with the major treatment centers in the Netherlands, 116 male patients newly diagnosed between 1978 and 1981 with primary malignancies of epithelial origin of this site were identified for study. Living controls were selected from the municipal registries, and deceased controls were selected from the national death registry. Interviews were completed for 91 (78%) cases and 195 (75%) controls. Job histories were coded by industry and occupation. An index of exposure was developed to classify the extent of occupational exposure to wood dust. When necessary, adjustment was made for age and usual cigarette use. The risk for nasal adenocarcinoma was elevated by industry for the wood and paper industry (odds ratio (OR) = 11.9) and by occupation for those employed in furniture and cabinet making (OR = 139.8), in factory joinery and carpentry work (OR = 16.3), and in association with high-level wood dust exposure (OR = 26.3). Other types of nasal cancer were not found to be associated with wood-related industries or occupations. A moderate excess in risk for squamous cell cancer (OR = 2.5) was associated with low-level wood dust exposure; however, no dose-response relation was evident. The association between wood dust and adenocarcinoma was strongest for those employed in wood dust-related occupations between 1930 and 1941. The risk of adenocarcinoma did not appear to decrease for at least 15 years after termination of exposure to wood dust. No cases of nasal adenocarcinoma were observed in men whose first exposure to wood dust occurred after 1941.

  2. An Applied General Equilibrium (AGE) analysis of a policy designed to reduce the household consumption of wood in the Sudan

    International Nuclear Information System (INIS)

    Dufournaud, C.M.; Quinn, J.T.; Harrington, J.J.

    1994-01-01

    The Sudan, along with all Sahelian countries, faces urgent environmental problems caused, in part, by the clear-cutting of scrub for firewood. Analyzes the economic consequences of a policy often proposed to reduce the consumption of firewood. Specifically, the authors simulate the policy of introducing more efficient wood burning stoves into households by using an Applied General Equilibrium (AGE) model. The results indicate that the anticipated reduction in the economy-wide demand for wood, based on the increase in the technical efficiency of the stoves, is not fully realized. 23 refs., 2 figs., 5 tabs

  3. The Creation Of Furniture Products Design From Stem Waste Of Sugar Palm Tree (Arenga Pinnata

    Directory of Open Access Journals (Sweden)

    I Wayan Seriyoga Parta

    2017-11-01

    Full Text Available Sugar Palm tree (Arenga Pinnata is one of potential natural resources that can be used as a based material of furniture products. But, this sugar palm tree potential hasn’t exploited maximally and only throws away as a waste that contaminates the environment. On the other side, woods that have been used as based material of furniture products are getting rare and expensive. Based on that problem, this research is aimed to design new furniture products models that exploite the stem waste as a prominent based material.  This research uses experiment method with steps: 1 finding and formulating concepts of furniture products design creation based on analysis towards the stem waste of sugar palm tree characteristics; 2 implementing of finding concepts to become furniture products models from stem waste of sugar palm tree. As a result of the research, it is found “tube” concept and tatah carved concept as a right concept to be applied in creation of furniture products from stem waste of sugar palm tree. Implementing of “tube” concept and tatah carved concept is made successfully in shape of some furniture products design such as:  table model, chair model and wardrobe model. Realization of these designs has concerned with the use of sugar palm tree as a prominent based material. According to the result of evaluation, all of these designs are deserved to be made. So, it is concluded that to anticipate the qualified wood as a based material of furniture products, we can use stem waste of sugar palm tree as alternative based material. Pohon aren (Arenga Pinnata merupakan salah satu sumber daya alam yang potensial digunakan sebagai bahan baku produk mebel. Akan tetapi, potensi batang pohon aren itu belum dimanfaatkan secara maksimal dan hanya terbuang menjadi limbah yang mengotori lingkungan. Di sisi lain, kayu yang selama ini dimanfaatkan sebagai bahan baku produk mebel keberadaannya makin langka dan mahal. Bertolak dari permasalahan itu

  4. Wood biomass use in Slovenia and new challenges for the future

    International Nuclear Information System (INIS)

    Krajnc, N.

    2005-01-01

    In the last decades, wood has been substituted by other materials in many fields of utilization (construction, furniture, energy production). In Slovenia, which is markedly wooded, the process of substituting wood as a raw material started later but has been rather intense in the last twenty years. Substitution of wood in industry and in energy production has several consequences. Among the most distinctive ones are pollution of environment because of increased utilization of fossil fuels, and low realization of cut in forests. In this article we would like to present wood biomass use in Slovenia and some actions which were taken on both micro and macro level in last few years to overcome social and economical barriers for enlarge use of wood biomass.(author)

  5. Applications of Mechatronics in Seating Furniture

    Directory of Open Access Journals (Sweden)

    Hynek Maňák

    2014-01-01

    Full Text Available Mechatronics is gradually being used in different fields of the production process and final products. In the field of home seating furniture, it has not been formally declared as such yet. The purpose of further development of seating furniture is to improve its ergonomic parameters, to improve user comfort in controlling and using seating furniture or to provide new additional functions of seating furniture. Application of mechatronic principles can be presumed within the framework of this development. An analysis of the current state of reclining seating furniture, which uses mechanical and electromechanical positioning mechanisms, is conducted in order to formulate possible fields of applying mechatronics. The analysis defines individual ergonomic parameters which are influenced in reclining of seating furniture. This analysis is used as a basis for formulating a hypothesis describing potential development fields of applying mechatronics in home seating furniture.

  6. EVOLUTION OF LIGHTWEIGHT WOOD COMPOSITES

    Directory of Open Access Journals (Sweden)

    Marius C. BARBU

    2016-01-01

    Full Text Available Lightweight boards and beams in the wood-based construction and furniture industry are not a new topic. The density reduction of panels using sandwich structure with light cores was confirmed by users like doors or mobile homes more than three decades ago. Today many ways to attain a lighter wooden structure are on offer, partially in industrial application. The first one is the use of light-weight wood species like balsa, lime, pine from southern hemisphere plantations etc. limited by the availability, strength properties, gluability and so on. A second one is the sandwich structure made from hard faces like thick veneer, thin plywood, particleboard or high density thin fiberboard and cores made from honeycomb paper, very light wood species or foams like the polystyrene one. A third way to produce a light structure is to reduce the core drastically, using predesigned skeletons with special shapes and connections to the faces. The engines for these developments are on the one hand the fast growing market of knockdown furniture and on the other hand the increasing costs for energy and raw materials. Additional factors that make weight saving a primary economical objective for most producers are transportation costs, easier handling and higher acceptance among the end users. Moreover, customers demand more for ergonomical solutions regarding packaging. Many patents were generated by researchers and developers for new one-stage production processes for sandwich panels with wood- and impregnated paper-based facings made from veneers, particles or fibres and a core consisting of expandable foams, particles or embedded hard skeletons. These ideas or prototypes could be integrated in existing continuous pressing lines for wood based panels keeping some of the advantages of the continuous production technique in matters of efficiency. Some of the challenges of the light weight wooden structure are the connection in half or final parts, resistance to

  7. DNA Damage among Wood Workers Assessed with the Comet Assay

    Science.gov (United States)

    Bruschweiler, Evin Danisman; Wild, Pascal; Huynh, Cong Khanh; Savova-Bianchi, Dessislava; Danuser, Brigitta; Hopf, Nancy B.

    2016-01-01

    Exposure to wood dust, a human carcinogen, is common in wood-related industries, and millions of workers are occupationally exposed to wood dust worldwide. The comet assay is a rapid, simple, and sensitive method for determining DNA damage. The objective of this study was to investigate the DNA damage associated with occupational exposure to wood dust using the comet assay (peripheral blood samples) among nonsmoking wood workers (n = 31, furniture and construction workers) and controls (n = 19). DNA damage was greater in the group exposed to composite wood products compared to the group exposed to natural woods and controls (P < 0.001). No difference in DNA damage was observed between workers exposed to natural woods and controls (P = 0.13). Duration of exposure and current dust concentrations had no effect on DNA damage. In future studies, workers’ exposures should include cumulative dust concentrations and exposures originating from the binders used in composite wood products. PMID:27398027

  8. The potential of Swedish furniture companies in Vietnam : How Vietnamese consumers perceive the product values of Swedish furniture

    OpenAIRE

    Dinh, Thi Phuong Lan; Karlsson, Jonas

    2012-01-01

    Introduction: Swedish furniture companies have been quite successful in many parts of the world recently, with IKEA being a famous example of that. Meanwhile, Vietnam has one of the fastest-growing economies in South East Asia. However, there has not been any Swedish furniture company established on the Vietnamese market so far. Therefore, it would be useful to see if the Vietnamese furniture consumers would appreciate Swedish furniture, in order to analyze whether Swedish furniture companies...

  9. Longitudinal lung function decline and wood dust exposure in the furniture industry.

    Science.gov (United States)

    Jacobsen, G; Schlünssen, V; Schaumburg, I; Taudorf, E; Sigsgaard, T

    2008-02-01

    The aim of the present study was to investigate the relationship between change in lung function and cumulative exposure to wood dust. In total, 1,112 woodworkers (927 males, 185 females) and 235 reference workers (104 males, 185 females) participated in a 6-yr longitudinal study. Forced expiratory volume in one second (FEV(1)), forced vital capacity (FVC), height and weight were measured, and questionnaire data on respiratory symptoms, wood dust exposure and smoking habits were collected. Cumulative inhalable wood dust exposure was assessed using a study-specific job exposure matrix and exposure time. The median (range) for cumulative wood dust exposure was 3.75 (0-7.55) mg x year x m(-3). A dose-response relationship between cumulative wood dust exposure and percent annual decrease in FEV(1) was suggested for female workers. This was confirmed in a linear regression model adjusted for confounders, including smoking, height and age. An additional difference of -14.50 mL x yr(-1) and -27.97 mL x yr(-1) was revealed for females exposed to 3.75-4.71 mg x yr x m(-3) or to >4.71 mg x yr x m(-3), respectively, compared with non-/low-exposed females. For females, a positive trend between wood dust exposure and the cumulative incidence proportion of FEV(1)/FVC <70% was suggested. In conclusion, in the present low-exposed cohort, female woodworkers had an accelerated decline in lung function, which may be clinically relevant.

  10. PENGARUH ORIENTASI PASAR TERHADAP KEUNGGULAN BERSAING MELALUI INOVASI PADA UKM BIDANG FURNITURE DI KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Sendhang Nurseto

    2016-02-01

    Full Text Available One of the small and medium enterprises in the city of Semarang is the field of furniture and furniture . Furniture or furniture that is often referred to as a product included in the household so that the furniture is not the scarce goods but is needed by the community . Realization of production every year to reach an average of only 90 % of the target . The resulting production also fluctuated every year , almost every year has decreased . The purpose of this study was to determine the effect of market orientation and innovation to compete SMEs lead with furniture in the city of Semarang . The population in this study was 64 furniture craftsman whose products have been exported to SMEs furniture Semarang . Way of selecting a sample ( respondents were used in this study using nonprobability sampling technique. Analysis using quantitative , qualitative analysis , validity , reliability testing , path analysis , descriptive analysis and differential analysis . The results showed t value of the variable effect of market orientation on innovation by 3.690 , the hypothesis 1 ( H1 that the Market Orientation proven positive effect on innovation . T value of the variable effect of market orientation on Competitive Advantage of 2,079 > t Table , hypothesis 2 ( H2 that the positive effect on market orientation Competitive Advantage proven . T value of the variable influence of Innovation for Competitive Advantage 3.332 > t table , the hypothesis 3 ( H3 that innovation has a positive effect on Competitive Advantage proven . Calculated F value of the variable influences Market Orientation and Innovation for Competitive Advantage by 9.396 > F table , hypothesis 4 ( H4 that the Market Orientation and Innovation positive effect on Competitive Advantage proven . Craftsmen will need to improve understanding of market orientation in the face of competition . Owned and increase innovation to improve the ability and skill to produce a better product thus

  11. Compression and flexural properties of finger jointed mango wood sections

    OpenAIRE

    Kumar, V.S Kishan; Sharma, C.M; Gupta, Sachin

    2014-01-01

    In this paper, an attempt was made to assess the effectiveness of finger jointing in utilising mango wood sections for various end uses like furniture. The study was based on the estimation of Modulus of elasticity and Modulus of rupture under static bending and Maximum Crushing Stress and Modulus of elasticity under compression parallel to grain of finger jointed sections and comparing them with the values measured for clear wood sections from the same lot. For joining the sections, the Poly...

  12. Anatomical and chemical properties and density of Coffea arabica L. wood

    Directory of Open Access Journals (Sweden)

    Marisa Aparecida Pereira

    2014-09-01

    Full Text Available The state of Minas Gerais is the largest producer of coffee in Brazil and the amount of residue in crops seems adequate to support production of solid wood products of Coffea arabica L., which is currently used for energy purposes or remains in the area. This activity adds insignificant value the coffee products and release CO2, which has harmful effects to the environment. This study was conducted with the aim of characterizing technologically Coffea arabica L. wood to enhance its use in furniture, to characterize its anatomical, chemical and wood basic density. The density showed an average of 0.608g.cm-3. The anatomical analysis showed distinct growth layers, semiporosos vessels with simple perforation plates. The axial parenchyma is apotracheal and diffuse in the aggregate with heterogeneous rays, not laminated and fiber libriformes not septate with bordered pits distinct. The chemical content of extract in hot and cold water were respectively 6.1% and 9.6%. The ash content was found to be 0.68%. Data were comparable to those of mahogany (Swietenia macrophylla and Piptadenia peregrina Benth, (angico-vermelho used for the production of furniture.

  13. Wood fuels sources and markets

    International Nuclear Information System (INIS)

    Koopmans, Auke

    2003-01-01

    Biomass energy is an important source of energy in most Asian countries. Households and industries use substantial amounts of fuel wood, charcoal and other biomass energy, such as agricultural residues, dung, leaves and sawmill residues. The main household applications are cooking and heating whereas industrial applications range widely. This paper provides an overview of estimates on the production and trade of biomass fuels in the South-east Asia region. The flows and channels used in the supply of wood fuels in different countries were analysed. This paper may help in identifying policy gaps with regards to the supply and consumption of wood fuels from both forest and non-forest sources. (Author)

  14. PHYSICAL ANALYSIS OF QUALITY WOOD Melia azedarach

    Directory of Open Access Journals (Sweden)

    T. J. da Silva

    2016-07-01

    Full Text Available Forest species, in general, present a slow growth, which results and profits can manifest themselves in the long run, it becomes necessary the study and discovery of new species that may provide raw materials and return on invested capital more immediate, being that the Melia azedarach wood is a potential option. In the absence of information about, the objective of this paper is to determine its physical properties: basic density and shrinkage of the Melia azedarach species in the Itapeva-SP region. The data obtained in this study allow to classify wood Melia azedarach as wood of average density and good dimensional stability. Feature that makes it ideal for its use in furniture industry. The low amount of research related to quality of this wood prevents the commercial use of it to achieve its full potential harnessing its effectively, and essential investments in this field.

  15. Waste from glued wood - A base for new products and/or bio-fuel?

    OpenAIRE

    Bjurman, Therese

    2009-01-01

      The Swedwood Company is a supplier to IKEA of wood furniture. They have grown larger concurrently with IKEA and at present they have 47 production units spread over twelve countries of which most are located in Eastern Europe. One of the factories is Zbaszynek which is located in Poland. They manufacture so called board-on-frame furniture. A board-on-frame is basically made out of particle board frames which are filled with special design paper that enfolds air. The frames are then covered ...

  16. 40 CFR 63.4881 - Am I subject to this subpart?

    Science.gov (United States)

    2010-07-01

    ... themselves: household, office, institutional, laboratory, hospital, public building, restaurant, barber and... conducted in an operation that is subject to the wood furniture manufacturing NESHAP in subpart JJ of this... janitorial, building, and facility maintenance operations. (4) Surface coating of only small items such as...

  17. THE DIFFERENCE OF MACHINING PROPERTIES OF TIMO (Timonius sericeus (Desf K. Schum. And KABESAK WOOD (Acacia leucophloea (Roxb. Willd. FROM EAST NUSA TENGGARA

    Directory of Open Access Journals (Sweden)

    Heny Rianawati

    2015-09-01

    Full Text Available Machining properties is one of the parameters to determine the quality of the wood. Tests on machining properties of wood are important to know the easiness level of workmanship as raw materials of furniture industry, construction wood and other wood products. This research was aimed at determining the difference of machining properties between timo wood (Timonius sericeus (Desf K. Schum. and kabesak wood (Acacia leucophloea (Roxb. Willd. from the village of Reknamo, Kupang district, East Nusa Tenggara. Testing procedures were based on ASTM D1666 including: planning, shaping, sanding, drilling and turning. The observation of qualities of the machining were done visually by calculating the percentage of defects that arise on the surface of the samples after the machining process, then the qualities were classified into five quality classes. The results showed that the machining properties of timo wood and kabesak wood were very good and belonging to the quality of class I. The significant difference between the machining properties of both the timbers is in the sanding properties, where the average free defect of sanding timo wood is 85% while kabesak wood is 84.5%. Both timo and kabesak wood are suitable as raw material, for the variety of furniture and molding products.

  18. Household energy preferences for cooking in urban Ouagadougou, Burkina Faso

    International Nuclear Information System (INIS)

    Ouedraogo, Boukary

    2006-01-01

    An extensive survey on household expenditures in Ouagadougou, the capital of Burkina Faso, was used to analyze the factors determining urban household energy choices using a multinomial logit model. Wood-energy remains the preferred fuel of most urban households in the country; though rational, the choice is not sustainable as it portends a threat to the savanna woodlands and the economy. Many important policies have been adopted by public authorities to minimize household wood-energy consumption and to substitute it by alternative fuel. Despite the magnitude of all these policies, the depletion rate of the forest resource is increasing. A kind of inertia is thus observed for household preferences for cooking fuel. This model analyzes the sociological and economic variables of household energy preferences for cooking in Ouagadougou. The analyses show that the inertia of household cooking energy preferences are due to poverty factors such as low income, poor household access to electricity for primary and secondary energy, low house standard, household size, high frequency of cooking certain meals using woodfuel as cooking energy. The descriptive analyses show that the domestic demand for wood-energy is strongly related to household income. The firewood utilization rate decreases with increasing household income. In other words, this fuel appears as a 'transition good' for these households which aim for other sources of energy for cooking that are more adapted for urban consumption. This implies that a price subsidy policy for liquid petroleum gas (LPG) and its cook stoves could significantly decrease the utilization rate of wood-energy

  19. Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed.

    Science.gov (United States)

    Heo, Hyeon Su; Park, Hyun Ju; Park, Young-Kwon; Ryu, Changkook; Suh, Dong Jin; Suh, Young-Woong; Yim, Jin-Heong; Kim, Seung-Soo

    2010-01-01

    The amount of waste furniture generated in Korea was over 2.4 million tons in the past 3 years, which can be used for renewable energy or fuel feedstock production. Fast pyrolysis is available for thermo-chemical conversion of the waste wood mostly into bio-oil. In this work, fast pyrolysis of waste furniture sawdust was investigated under various reaction conditions (pyrolysis temperature, particle size, feed rate and flow rate of fluidizing medium) in a fluidized-bed reactor. The optimal pyrolysis temperature for increased yields of bio-oil was 450 degrees C. Excessively smaller or larger feed size negatively affected the production of bio-oil. Higher flow and feeding rates were more effective for the production of bio-oil, but did not greatly affect the bio-oil yields within the tested ranges. The use of product gas as the fluidizing medium had a potential for increased bio-oil yields.

  20. Lumber attributes, characteristics, and species preferences as indicated by secondary wood products firms in the continental United States.

    Science.gov (United States)

    David L. Nicholls; Joseph. Roos

    2006-01-01

    The purpose of this research was to evaluate selected lumber attributes, species preferences, and lumber use properties among secondary wood manufacturers in the United States. Our sample included producers of kitchen cabinets, furniture, doors, windows, and molded products who attended regional and national wood manufacturing events. More than 51% of respondents had...

  1. Risks for respiratory and gastric cancer in wood-working occupations in Denmark.

    Science.gov (United States)

    Olsen, J H; Møller, H; Jensen, O M

    1988-01-01

    Cases of cancer notified to the Danish Cancer Registry during the period 1970 to 1984 in the age groups 16 to 66 years have been linked to information on employment kept on file in the nationwide Supplementary Pension Fund since 1964. Industrial hygienists classified industrial groups as defined by the Pension Fund with regard to exposure to wood dust, and a list of industries with major exposure to wood dust was defined. The risk for cancer of the respiratory system and the gastrointestinal tract was evaluated by means of a proportional cancer incidence analysis. A fourfold increase in risk for sinonasal cancer was found among men involved in the manufacture of wooden furniture, and a twofold increase in risk for gastric cancer was seen in all of the component industries of basic wood-processing. In contrast, no excess of gastric cancer could be detected in men working in the manufacture of wooden building materials and wooden furniture, and a risk below unity was seen for those in carpentry and joinery. The elevated risk for gastric cancer in some wood-processing industries is probably due to social factors also common to men in agriculture and manufacturing. The absence of an increased risk for gastric cancer in trades in which a high risk for sinonasal cancer is seen indicates that wood dust is not of aetiological importance for gastric cancer. No excess of total lung cancer or of the adenocarcinoma subtype was seen in any of the wood-processing industries.

  2. Radial variation of wood physical properties in Pinus patula growing in Mozambique

    Directory of Open Access Journals (Sweden)

    Claudio Gumane Francisco Juizo

    2015-09-01

    Full Text Available  This study aimed to evaluate wood physical properties of Pinus patula, aged 38, from a forest stand located in Machipanda, central region of Mozambique. Determination of physical properties, such as basic specific gravity, shrinkage, and moisture content of wood in the pith-bark followed the recommendations of the Panamerican Standard - COPANT. Results showed statistically significant differences at significance level of 5%, in the radial direction for the shrinkage coefficient in the pith-bark. Radial and tangential shrinkage values were 6.06 and 8.80% in juvenile wood and 6.18 and 8.65% in adult wood, respectively, with anisotropy coefficient of 1.43 for juvenile wood and 2.44 for adult wood. Pinus patula growing in Inhamacari forest shows stable wood at age 38. It can be used for structural purposes and for manufacture of joinery and furniture.

  3. DEMONSTRATION OF A NO-VOC/NO-HAP WOOD KITCHEN CABINET COATING SYSTEM

    Science.gov (United States)

    The report gives results of the development and demonstration of a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating system at two cabinet manufacturing plants: one in Portland, OR, and the other in Redwood City, CA. Technology transfer ef...

  4. Carel Breytspraak Sr., Purveyor to his Majesty King Louis Napoleon. Breytspraak furniture from the collection of the Royal Palace in Amsterdam

    Directory of Open Access Journals (Sweden)

    Paul van Duin

    2013-06-01

    Full Text Available In 1808, King Louis Napoleon had the town hall of Amsterdam converted to Royal Palace. Besides making the necessary architectural alterations, he ordered hundreds of pieces of furniture and other ornamental objects from local furniture makers, upholsterers, decorators and other suppliers. This collection of Empire furniture, which is still preserved in the palace, is today the largest of its kind outside France. Between 2005 and 2009, these pieces of furniture were restored as part of the wider restoration of the entire palace, a gigantic operation that involved hundreds of restoration experts. A furniture committee made sure that quality and looks remained uniform. During the process the restoration experts and researchers made a full study of the furniture, documenting finds and findings, supplemented with research into the origins, the makers, use, techniques and material. This is unique for the Netherlands. The data, recorded in documentation and restoration reports, offer fresh insights in especially the construction and manufacturing process of Dutch Empire furniture. The discoveries are illustrated by a number of purveyances by Carel Breytspraak Sr. (1769-1810, the best paid furniture maker of the king. The 100 chairs he made for the Grand dining room of the palace are an example of pre-modern serial production. This may be inferred from the varying quality of the wood that was used and from the varying thickness of the seat stretchers, among other things. Furthermore, it turned out that the chairs still had the original stuffing, which was reused after having been restored. One chair still had the original upholstery from the days of Louis Napoleon and this was used as the basis for the current upholstery. The chairs are typical examples of furniture made after French decoration prints, which were undoubtedly provided by the king’s architects. The roll-top desk that Breytspraak made for the king’s bedroom is one of the most unique

  5. Species selection in secondary wood products: perspectives from different consumers

    Science.gov (United States)

    Scott A. Bowe; Matthew S. Bumgardner; Matthew S. Bumgardner

    2004-01-01

    This study investigated adult consumer perceptions of several wood species to determine if word-based and appearance-based evaluations differed. The research replicated a 2001 study by the authors, which used undergraduate college students as a proxy for older and more experienced adult furniture consumers. The literature is somewhat inconclusive concerning the extent...

  6. Okanagan indoor wood burning appliance inventory survey

    International Nuclear Information System (INIS)

    2001-01-01

    A survey was conducted to determine the usage and nature of wood burning appliances used by residents in British Columbia's Okanagan region. The objective was to better understand this source of air quality concern and to facilitate strategic planning, guidelines and legislation. The survey also provides a baseline to track the effectiveness of any reduction strategies. It identifies the different types of wood burning appliances used in the community and presents residential options about potential bylaws to protect air quality. The receptivity of households to switch to more efficient wood burning appliances was also examined. The survey completes a portion of an overall emissions inventory for the Okanagan Valley. Environment Canada uses the particulate loading results to model the air quality in the airshed. Results showed that approximately 21 per cent of the households in the Okanagan use indoor wood burning appliances, and burn an average of 2.3 cords of wood each year. Only 11 per cent of the appliances are considered to have advanced burning technology. It is projected that the use of wood burning appliances in the Okanagan will increase by 5 to 7 per cent in the next 2 years. Most residents have good burning habits, but some improvements can still be made. Many residents are considering exchanging old wood burning appliances for clean burning technology appliances for environmental and health reasons. Most households would support a bylaw to control nuisance amounts of smoke from wood burning appliances. 20 tabs., 5 figs

  7. Strength and durability of one-part polyurethane adhesive bonds to wood

    Science.gov (United States)

    C. B. Vick; E. A. Okkonen

    1998-01-01

    One-part polyurethane wood adhesives comprise a new class of general purpose consumer products. Manufacturersa claims of waterproof bonds brought many inquiries to the Forest Products Laboratory (FPL) from users constructing aircraft, boats, lawn furniture, and other laminated materials for outdoor use. Although FPL has technical information on several types of...

  8. Fellin Furniture - disainitud kasutamiseks

    Index Scriptorium Estoniae

    2010-01-01

    Viljandis asuvast mööbliettevõttest Fellinn Furniture ja seal valmistatavast mööblist. Kollektsiooni algsed loojad on disainerid Sixten Heidmets ja Sirli Ehari. Disainis on kasutatud elemente, mis võimaldavad toodete väljanägemist kergesti muuta ja hõlpsasti ruumis paigutada. Valmistatakse ka uusi tooteid, mille disainimisele on kaasa aidanud kogu Fellin Furniture meeskond

  9. Internationalisation of the Malaysian Wooden Furniture Industry

    OpenAIRE

    Zhao, LiXu

    2016-01-01

    Malaysia has a strong market share in wooden furniture and the witnessed fast growth made it a leading furniture exporter. Currently, Malaysia is the 8th largest furniture export country. As an export dominated industry, the wooden furniture industry occupies a significant position in the Malaysian economic development. Since the industry is a challenged and deteriorating in global competition, the research objective is to evaluate the present situation and find out strategies on how to impro...

  10. Impact of Imported Chinese Furniture on The Local Furniture Sector in Arusha City, Tanzania: Focusing on the Strategies of Furniture-Makers for Using Indigenous Timber Species

    OpenAIRE

    OGAWA, Sayaka

    2018-01-01

    The aim of this paper is to elucidate the strategies used by Tanzanian furnituremakers to deal with price competition from Chinese imported furniture by examining the changes in the local use of timber, which is becoming scarce due to destructive harvesting. Chinese furniture flowing into Tanzania is not only of a fashionable design but it is also cheap because it is constructed from low-quality timber and alternative materials. Small-scale Tanzanian furniture-makers operate their business ba...

  11. Gas flow parameters in laser cutting of wood- nozzle design

    Science.gov (United States)

    Kali Mukherjee; Tom Grendzwell; Parwaiz A.A. Khan; Charles McMillin

    1990-01-01

    The Automated Lumber Processing System (ALPS) is an ongoing team research effort to optimize the yield of parts in a furniture rough mill. The process is designed to couple aspects of computer vision, computer optimization of yield, and laser cutting. This research is focused on optimizing laser wood cutting. Laser machining of lumber has the advantage over...

  12. Analysis of U.S. household wood energy consumption: 1967-2009

    Science.gov (United States)

    Nianfu. Song; Francisco X. Aguilar; Stephen R. Shifley; Michael E. Goerndt

    2012-01-01

    The residential sector consumes about 23% of the energy derived from wood (wood energy) in the U.S. An estimated error correction model with data from 1967 to 2009 suggests that residential wood energy consumption has declined by an average 3% per year in response to technological progress, urbanization, accessibility of non-wood energy, and other factors associated...

  13. Assessment of the wood waste resource and its position in the wood / wood-energy sector - Synthesis

    International Nuclear Information System (INIS)

    Guinard, Ludovic; Deroubaix, Gerard; Roux, Marie-Lise; Levet, Anne-Laure; Quint, Vincent

    2015-04-01

    The first objective of this study is to obtain a better knowledge of the 'wood wastes' issue, to propose a photography of the wood waste sector (productions, trades, consumptions), and then to elaborate different prospective scenarios on the use of wood waste volumes while taking into account possible evolutions on the medium or short term of the regulation and market of the wood/wood energy sector. The considered wastes come from industrial production, from the use of wood-based products, and from the end of life of products potentially containing wood. The authors present bibliographical sources and the adopted methodology, briefly describe the 'wood waste' system with its actors, and then report their assessment of wood wastes. They propose a global assessment as well as detailed assessments with respect to waste origins: wood trade and distribution, industries, craft, households and communities, building sector, public and private tertiary sector, packaging. They also address the collection and management of wood wastes by public services, and present the different types of valorisation (panel fabrication, energy, and others). They discuss exports, and then present different scenarios: a trend-based scenario, and two prospective scenarios with a priority to energetic valorisation or to material valorisation of wood wastes. These scenarios are compared

  14. Emissions and Deforestation Associated with Household Fuel Wood ...

    African Journals Online (AJOL)

    Fuel wood is regarded as a major source of energy around the world, particularly in developing nations where it forms part of the energy mix. Most rural communities around the world, consider forests a repository of stored energy. This paper focuses on the role of fuel wood in deforestation and the emission of greenhouse ...

  15. Parameters of quality of the woodworkability for determination of different usage of Eucalyptus wood

    Directory of Open Access Journals (Sweden)

    José Reinaldo Moreira da Silva

    2009-03-01

    Full Text Available Wood products used in the furniture industry need to have wood work machine surfaces quality optimized andpatronized. There are some classification methods to determine the wood quality, including visual inspection, determination of theadvance per tooth (fz, rugosimeter and laser or just touching. After the wood classification it is determined the usage of the differentwood qualities. The empiricism of the quality parameters in the indication of uses is not always ideal. This study determined the qualityof surfaces of Eucalyptus flat wood and defined appropriate uses for the different quality classes obtained. It had been worked machinedifferent Eucalyptus samples by planer with speed of advance of 3,6,15 and 30 m*min-1. To classify the wood, the determination of theadvance per tooth (calculated fz and measured fz and the visual qualification (ASTMD 1666-87, 1995 were used. Later the woodusage according to quality was determined. The percentage of good samples decreased as the speed advance increased: reaching92%, 69%, 0% and 0% for advance speed of 3,6,15 and 30 m*min-1 respectively. Samples prepared at the speed of 3 and 6 m*min-1 were used to fabricate furniture, cabinet frame and thresholds. About 54%of samples prepared at the speed of 15 m*min-1 were usedfor railing, lambris, structural panels and flooring. About 46% and 100% of samples prepared at the speed of 15 and 30 m*min-1,respectively, were used to fabricate dividers, trusses, fences and, or, exterior gates.

  16. Emission of formaldehyde from furniture

    DEFF Research Database (Denmark)

    Andersen, Helle Vibeke; Klinke, Helene B.; Funch, Lis Winther

    The emission of formaldehyde from 20 pieces of furniture, representing a variety of types, was measured in climate chambers. Most tests show low emissions but certain scenarios of furnishing, including furniture with large surface areas in relation to room volume can emit formaldehyde resulting...

  17. METHODS FOR DETERMINING THE AESTHETIC APPEAL OF FURNITURE

    Directory of Open Access Journals (Sweden)

    Mária Réka ANTAL

    2016-03-01

    Full Text Available The world of furniture market is getting more and more complex than it was before. In recent years the habits of buying furniture have changed. The fabrication of individual pieces of furniture is increasingly coming to the front. A personal contact is being established between the customer and the furniture, which is a relationship of one product to one customer. In order to satisfy the individual demands, higher prices and higher quality are needed. The competition is beginning at the market and emotion plays an important role in it. Therefore, functionality and aesthetic functions, determinative forms, fashionable style play a very important role in furniture design and production. Some methods are presented such as RMQD or FMEA used for determining aesthetics of furniture.

  18. Effects of species information and furniture price on consumer preferences for selected woods

    Science.gov (United States)

    Matthew Bumgardner; David Nicholls; Geoffrey Donovan

    2007-01-01

    Changing consumer tastes and species availability are influencing the design and manufacture of hardwood products. In addition, the globalization of wood product markets is exposing U.S. consumers to new species. This research evaluates consumer preferences for six domestic wood species--three from the eastern United States and three from the western United States. The...

  19. Effect of non-tariff barriers on secondary processed wood product trade: New Zealand exports to the United States, China and Japan

    Science.gov (United States)

    James A. Turner; Joseph Buongiorno; Shushuai Zhu; Frances Maplesden

    2008-01-01

    Secondary processed wood products - builder's carpentry and joinery, moldings and millwork, wooden furniture, and prefabricated buildings - have grown significantly in importance in the global trade of wood products. At the same time there has been increased use of non-tariff barriers to restrict their trade.  These barriers could have an important impact on the...

  20. Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

    Science.gov (United States)

    Bleda, Andrés L.; Jara, Antonio J.; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F.

    2012-01-01

    The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain. PMID:22778653

  1. Evaluation of the impact of furniture on communications performance for ubiquitous deployment of Wireless Sensor Networks in smart homes.

    Science.gov (United States)

    Bleda, Andrés L; Jara, Antonio J; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F

    2012-01-01

    The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

  2. Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

    Directory of Open Access Journals (Sweden)

    Antonio F. Gómez Skarmeta

    2012-05-01

    Full Text Available The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

  3. Radiographic testing of wood

    International Nuclear Information System (INIS)

    Osterloh, K.; Zscherpel, U.; Raedel, C.; Weidemann, G.; Meinel, D.; Goebbels, J.; Ewert, U.; Hasenstab, A.; Buecherl, T.

    2007-01-01

    Wood is an old and established consumption and construction material. It is still the most common material for constructing furniture, roofs, playgrounds and mine supports. In contrast to steel and concrete, wood warns of extreme loads by creaking. Its mechanical stability is more influenced by decay than by peripheral cracks. While external cracks are visible, internal decay by fungus growth is undetectable from outside. This may be a safety problem in supporting structures. The best analysis of the internal structure is provided by computed tomography, but this is also the most complex method, much more so than simple radiographic testing. However, the latter is made inaccurate by scattered radiation resulting from internal moisture. With the image processing options of digital radiographic techniques, the structural information can be separated effectively from noise. In contrast to X-ray and gamma radiography, neutron radiography provides information on the spatial distribution of moisture. In healthy wood, water is conducted in the sapwood while the hardwood is dry. Moisture in hardwood is caused by infestations, e.g. fungus growth. The contribution presents a comparative analysis of the available radiographic methods. (orig.)

  4. Emissions of toxic pollutants from co-combustion of demolition and construction wood and household waste fuel blends.

    Science.gov (United States)

    Edo, Mar; Ortuño, Núria; Persson, Per-Erik; Conesa, Juan A; Jansson, Stina

    2018-07-01

    Four different types of fuel blends containing demolition and construction wood and household waste were combusted in a small-scale experimental set-up to study the effect of fuel composition on the emissions of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), chlorobenzenes (PCBzs), chlorophenols (PCPhs) and polycyclic aromatic hydrocarbons (PAHs). Two woody materials, commercial stemwood (ST) and demolition and construction wood (DC) were selected because of the differences in their persistent organic pollutants (POPs), ash and metals content. For household waste, we used a municipal solid waste (MSW) and a refuse-derived fuel (RDF) from MSW with 5-20 wt% and up to 5 wt% food waste content respectively. No clear effect on the formation of pollutants was observed with different food waste content in the fuel blends tested. Combustion of ST-based fuels was very inefficient which led to high PAH emissions (32 ± 3.8 mg/kg fuel ). The use of DC clearly increased the total PCDD and PCDF emissions (71 ± 26 μg/kg fuel ) and had a clear effect on the formation of toxic congeners (210 ± 87 ng WHO 2005 -TEQ/kg fuel ). The high PCDD and PCDF emissions from DC-based fuels can be attributed to the presence of material contaminants such as small pieces of metals or plastics as well as timber treated with chromated copper arsenate preservatives and pentachlorophenol in the DC source. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Furniture for a Technology-Infused School.

    Science.gov (United States)

    Fickes, Michael

    1998-01-01

    Discusses how one New Mexico school district weighed the choices in selecting and purchasing computer furniture for its classrooms. The purchasing process is described, as well as the types of, and reasons for, the furniture bought. (GR)

  6. Consumer Behaviour Model on the Furniture Market

    Directory of Open Access Journals (Sweden)

    BEDNÁRIK, Éva

    2010-01-01

    Full Text Available This study introduces the furniture purchasing behaviour model. The study describes thebehaviour model and characteristics of decision making and the environmental factors affecting theindividuals besides emphasising the family character of furniture purchase. We introduce a chapterfrom the primary research verifying the model that analyses the validity of customer behaviour trendsdefined as elements of the impersonal environment on the furniture market. We touch on our lifestylebased segmentation model which is elaborated in our work in detail. The method of primary researchis quantitative, personal interview. While working out our research model we applied a method thatenables multi-level cross-section and cohort analyses. Our work has verified the need for trendresearches on the furniture market so we suggest the construction and the near-future launch of a trendresearch system consisting of several modules that reveals the specific factors on the furniture marketbesides verifying the validity of general behaviour trends.

  7. 75 FR 80528 - Wooden Bedroom Furniture From China

    Science.gov (United States)

    2010-12-22

    ... furniture from China would be likely to lead to continuation or recurrence of material injury to an industry... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1058 (Review)] Wooden Bedroom Furniture... Publication 4203 (December 2010), entitled Wooden Bedroom Furniture from China: Investigation No. 731-TA-1058...

  8. Assessment of Dust Emission and Working Conditions in the Bamboo and Wooden Furniture Industries in Malaysia

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2015-12-01

    Full Text Available A study was carried out to assess the dust emission and working conditions in the bamboo and rubberwood furniture manufacturing industries in Malaysia. The emission of wood dust arising from these industries was measured in each main work station in the mills. Meanwhile, a questionnaire-based survey was conducted among 5900 workers in 45 companies to obtain information on the occupational accidents that occurred in the mills. The data were collected, compiled, and analyzed using the SPSS package. The highest dust emission from the sanding operation resulted in respiratory ailments among workers. The occurrence of injuries particularly to the hand, wrist, fingers and forearm was due to the prevailing working conditions, safety climate and workers characteristics. The dust exposure levels and working conditions were much more severe in the bamboo furniture manufacturing industry. As a result, a review of existing of dust exposure levels in the woodworking industry is warranted.

  9. Aproveitamento de resíduos de painéis de madeira gerados pela indústria moveleira na produção de pequenos objetos Small objetcs manufactured with wood panel residues generated by rhe furniture industry

    Directory of Open Access Journals (Sweden)

    Luciana Barbosa de Abreu

    2009-02-01

    Full Text Available Os painéis reconstituídos à base de madeira ganharam espaço antes ocupado pela madeira maciça, o que tem gerado volume expressivo de resíduos. A indústria moveleira contribui para a geração desses resíduos, que se apresentam como alternativa viável para a exploração de sua aplicação na produção artesanal de pequenos objetos. Este trabalho teve por objetivo produzir pequenos objetos com painéis e com mistura de resíduos de painéis de madeira, a fim de comparar suas qualidades. A partir de 10 projetos gráficos, três artesãos confeccionaram 10 pequenos objetos, utilizando painéis de MDF (Medium Density Fiberboard, OSB (Oriented Strand Board e compensado. Cada artesão produziu nove exemplares de cada objeto. Um quarto artesão confeccionou os mesmos objetos com resíduos de três empresas do polo moveleiro da cidade de Ubá, MG, com três repetições, sendo comparados os atributos de qualidade dos objetos. Concluiu-se que todos os painéis são adequados para a confecção dos objetos e alguns se destacam em relação a outros, conforme o atributo avaliado. Os objetos confeccionados com a mistura de resíduos de painéis de madeira tiveram acabamento uniforme e não apresentaram diferenças significativas em relação aos produzidos com painéis com relação aos atributos funcionalidade, peso, proporção e simetria. A mistura de resíduos de diferentes painéis influenciou negativamente a avaliação dos atributos acabamento, beleza e cor. Um objeto produzido a partir de resíduos do mesmo painel pode ser mais harmonioso e atrativo. É tecnicamente viável a produção de pequenos objetos a partir de resíduos de painéis de madeira vindos de indústrias moveleiras.Wood residue panels have been used in substitution of solid wood. As a consequence, the volume of residues has been increasing day-by-day. The furniture industries are the major generators of these residues. Their use as raw material for the production of

  10. DESAIN FURNITURE PADA LABORATORIUM PENDIDIKAN SENI RUPA

    Directory of Open Access Journals (Sweden)

    Agus Nursalim

    2016-04-01

    Full Text Available Permasalahan dalam penelitian ini adalah bagaimana membuat desain furniture yang memenuhi standard Antrophometry dan Ergonomy untuk Laboratorium Pendidikan Seni Rupa. Penelitian mengkaji tingkat kenyamanan furniture yang dipakai mahasiswa ketika sedang praktikum di studio. Penelitian dilakukan dengan tujuan untuk mengenai standard kenyamanan pembutan desain furniture yang akan digunakan mahasiswa sebagai perlengkapan praktikum pada laboratorium Pendidikan Seni. Bentuk Penelitian ini adalah penelitian diskriftif dengan metode kwalitatif. Temuan awal dalam penelitian ini adalah: dimensi ergonomics dan antropometrics mahasiswa pendidikan seni rupa memiliki nilai X(mean masih dibawah standard International (rekomendasi: Dreyfuss dalam buku “:The Measure of Man” dengan standard deviasi 1.96 dengan persentil 2.5 dan persentil 97.5 masih dalam batas normal (Data Tabel 4.7 dan Tabel 4.8: dimensi antropomotrics mahasiswa Angkatan 20122013. Centre of grafity atau moment of grafity mahasiswa ketika praktikum dengan duduk bertumpu pada pantat dan daerah kerja normal pada rentang 72.4-87.5. Sedangkan mahasiswa yang melakukan praktikum dengan berdiri bertumpu pada kaki dengan angular motion dan siku bebas bergerak (SBB pada rentang 183.92212.9 (data Tabel 4.2-Tabel 4.5:Data Ergonomi Mahasiswa Angkatan 2012-2013 sesuai dengan rekomendasi C.G. Drury dalam „Journal Apllied Ergonomics’. Vol.13, p.135. masih dalam tingkat nyaman. Hasil temuan ini kemudian digunakan sebagai pertimbangan awal dalam membuat desain Furniture pada studio Pendidikan Seni Rupa. Dengan demikian mahasiswa merasakan kenyamanan dalam melakukan praktikum di Studio Pendidikan Seni Rupa dengan menggunakan furniture yang ada. Untuk itu furniture harus didesain yang adjustable. Kenyamanan Furniture berpengaruh signifikan terhadap prestasi mahasiswa. Desain furniture yang dibuat Adjustable diantaranya etsel untuk melukis, Meja kerja studio dasar, Kursi kerja untuk melukis, meja putar pada

  11. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    International Nuclear Information System (INIS)

    González-García, Sara; Gasol, Carles M.; Lozano, Raúl García; Moreira, Ma Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-01-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO 2 ) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. “Indoor products” included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the “Outdoor products” analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO 2 emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  12. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Garcia, Sara, E-mail: sara.gonzalez@usc.es [Division of Biology, Department of Life Sciences, Sir Alexander Fleming Building, Imperial College of London, South Kensington Campus, London SW7 2AZ (United Kingdom); Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gasol, Carles M.; Lozano, Raul Garcia [Inedit Innovacio, Carretera de Cabrils, km 2 -IRTA-, 08348 Cabrils, Barcelona (Spain); SosteniPrA - UAB-IRTA, Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Moreira, Ma Teresa [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gabarrell, Xavier; Rieradevall i Pons, Joan [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona UAB, 08193 Bellaterra, Barcelona (Spain); Department of Chemical Engineering, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain)

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO{sub 2}) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. 'Indoor products' included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the 'Outdoor products' analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO{sub 2} emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  13. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign.

    Science.gov (United States)

    González-García, Sara; Gasol, Carles M; Lozano, Raúl García; Moreira, María Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO(2)) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. "Indoor products" included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the "Outdoor products" analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO(2) emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments. Copyright © 2011 Elsevier B.V. All rights reserved.

  14. Level and distribution of employee exposures to total and respirable wood dust in two Canadian sawmills.

    Science.gov (United States)

    Teschke, K; Hertzman, C; Morrison, B

    1994-03-01

    Personal respirable (N = 230) and total (N = 237) dust measurements were made in two coastal British Columbia sawmills using a sampling strategy that randomly selected workers from all jobs in the mills over two seasons. Information about job title, department, season, weather conditions, location of the job relative to wood-cutting machines, and control measures also was collected at the time of sampling. Only 16 respirable wood dust samples were above the detection limit of 0.08 mg/m3; all 16 had levels industry, but most sawmill investigations report mean wood dust concentrations lower than those measured in the furniture and cabinetmaking industries, where concerns about wood dust exposures initially were raised.

  15. Employment changes in U.S. hardwood lumber consuming industries during economic expansions and contractions since 1991

    Science.gov (United States)

    William G. Luppold; Matt Bumgardner

    2016-01-01

    Understanding employment trends is important for discerning the economic vitality of U.S. hardwood lumber users. After a period of growth in the 1990s, employment in industries consuming hardwood lumber has declined in the 21st century. The wood household furniture industry has experienced the greatest decline, with North Carolina, Virginia, and California being the...

  16. Wood energy and air quality. Synthetic report

    International Nuclear Information System (INIS)

    2009-07-01

    This report presents and comments some reference data about the current and prospective (2010, 2020) pollutant emissions through wood combustion as a source of energy. It indicates and compares greenhouse gas emissions by the different sources for household, collective and industrial heating (fuel, gas, electricity, pellets, logs, grinds, wood wastes), gives an overview of atmospheric emissions due to biomass combustion. It compares emissions due to wood combustion with respect to the activity sectors and to combustion equipment. It highlights the challenges of the development of the household sector in terms of improvement and renewal of the quality of the burning equipment. It comments the implemented policies which notably aim at reducing the emission of particles, and at defining quality labels

  17. The Impact of Clustering on the Innovativeness Of Furniture Industry

    Directory of Open Access Journals (Sweden)

    Grzegorzewska Emilia

    2014-06-01

    Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

  18. POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    F. Li

    2016-06-01

    Full Text Available Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i acquirement of prior-knowledge, (ii pole extraction, (iii components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

  19. Pole-Like Street Furniture Decompostion in Mobile Laser Scanning Data

    Science.gov (United States)

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2016-06-01

    Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i) acquirement of prior-knowledge, (ii) pole extraction, (iii) components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

  20. Household energy and consumption and expenditures, 1990

    International Nuclear Information System (INIS)

    1993-01-01

    The purpose of this supplement to the Household Energy Consumption and Expenditures 1990 report is to provide information on the use of energy in residential housing units, specifically at the four Census regions and nine Census division levels. This report includes household energy consumption, expenditures, and prices for natural gas, electricity, fuel oil, liquefied petroleum gas (LPG), and kerosene as well as household wood consumption. For national-level data, see the main report, Household Energy Consumption and Expenditures 1990

  1. Effects of Different Wood Preservatives on The Some Physical Properties of Wood Species Used in Furniture and Building Industry

    Directory of Open Access Journals (Sweden)

    Abdi Atılgan

    2012-04-01

    Full Text Available This study aims to determine the combustion, density values of Fagus and Pinus sylvestris’ woods impregranted with Ammonium tetra fluoro borate (1 - 3 % and the mixture of cement and borax (6 % – 9 % according to ASTM-D 1413-76 standards. In the combustion test carried out according to ASTM-D 160-50, the combustion resulted from flame, the self-combustion and the combustion as glowing processes were completed and the amount of lux, combustion duration, decomposition and ash were determined. According to experimental results, it is determined that Fogus’ wood has the highest retention (42,43 kg/m3 in the mixture of cement and borax 9 %, combustion tempature (587 o C in the mixture of cement and borax 6 % , the value of lux (267 lux in the the combustion as glowing and Pinus sylvestris’ wood has the longest combustion duration (29,03 min. Ammonium tetrafluoro borate 1%, the most weight loss (94 %.

  2. [Exposure to hazardous chemical substances in furniture industry].

    Science.gov (United States)

    Pośniak, Małgorzata; Kowalska, Joanna; Makhniashvili, Ivan

    2005-01-01

    The aim of the study was to assess the exposure to organic solvents in plants of the furniture industry. Studies were conducted in five furniture plants. Hazardous chemicals present in the air at workposts were determined by capillary gas chromatography with mass spectrometry and flame ionization detection. The analysis of air samples collected at the workposts allowed to identify the following chemicals occurring during varnishing and cleaning of furniture surface elements: acetone, butan-2-one, ethyl, isobutyl and methoxypropyl acetate, 4-methylpentan-2-on, toluene, ethylbenzene and xylenes. Indices characteristic of combined exposure ranged from 0.13 to 1.67 and exceeded the limit value at 21% of workposts. The results of the study indicate that chemicals present at representative workposts during the furniture production are harmful to health of workers, especially those involved in varnishing and cleaning of furniture elements.

  3. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Furniture Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its characteristics, structur...

  4. Factors influencing selection of office furniture by corporations and universities

    Science.gov (United States)

    R. Bruce Anderson

    1976-01-01

    Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

  5. Dinamika Budaya Material pada Desain Furnitur Kayu di Indonesia

    Directory of Open Access Journals (Sweden)

    Arianti Ayu Puspita Ayu Puspita

    2016-09-01

    ABSTRAK   Perubahan kondisi ekonomi hingga abad ke-21, dan meningkatnya kebutuhan furnitur baik dari luar maupun dalam negeri, kemudian perkembangan ilmu desain di Indone sia, secara tidak langsung berhubungan de ngan permasalahan ekologi. Ketersediaan sumber daya alam seperti kayu, semakin berkurang sehingga mendorong industri furnitur di Indonesia untuk menggunakan alternatif berbagai macam kayu solid, kayu olahan hingga kayu limbah. Dari waktu ke waktu, perubahan kondisi sosial, ekonomi, dan gaya hidup, turut berperan pada kemunculan bentuk-bentuk furnitur baru di Indonesia. Pada penelitian ini, transformasi   kebutuhan material kayu pada furnitur akan dikaitkan dengan dinamika sosial budaya yang terjadi dari abad ke-18 hingga abad ke-21 di Indonesia. Tansformasi  akan dilihat berdasarkan perubahan teori Material Cultural Studies, yang kemudian akan menghasilkan kesimpulan bahwa konsep ekologi berperan penting dalam perkembangan desain furnitur kayu di Indonesia.   Kata kunci: transformasi budaya, furnitur, kayu, Indonesia, ekologi

  6. In situ polymerization of polyaniline in wood veneers.

    Science.gov (United States)

    Trey, Stacy; Jafarzadeh, Shadi; Johansson, Mats

    2012-03-01

    The present study describes the possibility to polymerize aniline within wood veneers to obtain a semi-conducting material with solid wood acting as the base template. It was determined that it is possible to synthesize the intrinsically conductive polymer (ICP) polyaniline in situ within the wood structure of Southern yellow pine veneers, combining the strength of the natural wood structure with the conductivity of the impregnated polymer. It was found that polyaniline is uniformly dispersed within the wood structure by light microscopy and FT-IR imaging. A weight percent gain in the range of 3-12 wt % was obtained with a preferential formation in the wood structure and cell wall, rather than in the lumen. The modified wood was found to be less hydrophilic with the addition of phosphate doped polyaniline as observed by equilibrium water swelling studies. While wood itself is insulating, the modified veneers had conductivities of 1 × 10(-4) to 1 × 10(-9) S cm(-1), demonstrating the ability to tune the conductivity and allowing for materials with a wide range of applications, from anti-static to charge-dispersing materials. Furthermore, the modified veneers had lower total and peak heat releases, as determined by cone calorimetry, because of the char properties of the ICP. This is of interest if these materials are to be used in building and furniture applications where flame retardance is of importance. © 2012 American Chemical Society

  7. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    Evaluation of consumers' choice of wooden dining furniture in Southwestern Nigeria: A market strategy for furniture manufacturers and marketers. ... The study recommended increase use of durable Lesser Used Species (LUS) of trees for producing dining furniture and location of showrooms to target high income earners.

  8. Marketing Strategy Formulation for the Introduction of Eukula Strato German Wood Finishes in Local Market of Emerging Indian Economy

    Directory of Open Access Journals (Sweden)

    Suraj Kushe Shekhar

    2013-09-01

    Full Text Available Wood finishing relates to the process of embellishing or protecting the surface of the wood. The paper aimed at formulating a marketing strategy for introducing water borne German based Wood Finishes named Eukula Strato into local market of northern Kerala, India. Multiple cross sectional descriptive research with judgmental sampling technique elicited responses from Finishers, Furniture manufacturers and Interior designers. Findings revealed that Eukula Strato had a distinct advantage when compared to any other Wood Finish that was available in the local market. Findings and suggestions were reported as per 4P’s of marketing mix. Percentage analysis, Chi square analysis etc were used to interpret the results

  9. Preliminary studies of Brazilian wood using different radioisotopic sources

    International Nuclear Information System (INIS)

    Carvalho, Gilberto; Silva, Leonardo Gondim de Andrade e

    2013-01-01

    Due to availability and particular features, wood was one of the first materials used by mankind with a wide variety of applications. It can be used as raw material for paper and cellulose manufacturing; in industries such as chemical, naval, furniture, sports goods, toys, and musical instrument; in building construction and in the distribution of electric energy. Wood has been widely researched; therefore, wood researchers know that several aspects such as temperature, latitude, longitude, altitude, sunlight, soil, and rainfall index interfere with the growth of trees. This behavior explains why average physical-chemical properties are important when wood is studied. The majority of researchers consider density to be the most important wood property because of its straight relationship with the physical and mechanical properties of wood. There are three types of wood density: basic, apparent and green. The apparent density was used here at 12% of moisture content. In this study, four different types of wood were used: 'freijo', 'jequetiba', 'muiracatiara' and 'ipe'. For wood density determination by non-conventional method, Am-241, Ba-133 and Cs-137 radioisotopic sources; a NaI scintillation detector and a counter were used. The results demonstrated this technique to be quick and accurate. By considering the nuclear parameters obtained as half value layers and linear absorption coefficients, Cs-137 radioisotopic source demonstrated to be the best option to be used for inspection of the physical integrity of electric wooden poles and live trees for future works. (author)

  10. Processing of the wood angelim pedra (Hymenolobium petraeum

    Directory of Open Access Journals (Sweden)

    Adjenane Corrêa Taques

    2016-08-01

    Full Text Available This study aimed to verify the behavior of wood Angelim stone (Hymenolobium petraeum Ducke submitted to the machining process. The study was developed in a carpentry shop in the city of Alta Floresta-MT. 36 boards with dimensions of 150 cm x 13.5 cm x 2.5 cm, length, width and thickness were randomly selected respectively for machining tests. The tests were developed according to the machinability of equipment used by the furniture industry, planing, sanding, drill and split by nail. 8 boards of wood in the stack were selected randomly to determine the moisture, according to 7190 (ABNT, 1997. The notes used for evaluation of defects resulting in the wood during the machining processes were assigned according to ASTM D 1666 (1987. It was observed that the type of angelim stone showed excellent performance in grinding tests, no scratch on the surface piece a of the burring parts and the parts free from defects, with the burning of wood. In cracking test for nail had a good performance, because it showed cracks with the insertion of the nail and planing test a regular performance, with pullout grain, surface arrepiamento and pullout chip. Wood Angelim stone responds with quality to the machining processes in planing, sanding, drill and split by nail.

  11. Tisettanta case study: the interoperation of furniture production companies

    Science.gov (United States)

    Amarilli, Fabrizio; Spreafico, Alberto

    This chapter presents the Tisettanta case study, focusing on the definition of the possible innovations that ICT technologies can bring to the Italian wood-furniture industry. This sector is characterized by industrial clusters composed mainly of a few large companies with international brand reputations and a large base of SMEs that manufacture finished products or are specialized in the production of single components/processes (such as the Brianza cluster, where Tisettanta operates). In this particular business ecosystem, ICT technologies can bring relevant support and improvements to the supply chain process, where collaborations between enterprises are put into action through the exchange of business documents such as orders, order confirmation, bills of lading, invoices, etc. The analysis methodology adopted in the Tisettanta case study refers to the TEKNE Methodology of Change (see Chapter 2), which defines a framework for supporting firms in the adoption of the Internetworked Enterprise organizational paradigm.

  12. Wood Products Consumption for Industrial Markets in the United States, Testing a New Research Method

    Science.gov (United States)

    Craig Adair; David B. McKeever

    2013-01-01

    In early 2012, APA-The Engineered Wood Association conducted studies of three industries: institutional furniture, motor homes, and travel trailers and campers. The survey procedure was the same as that used by APA for many years. Lists of individual manufacturers were purchased, a telephone interviewing company was hired to administer a questionnaire, and APA...

  13. Manufacture of wood/plastic composites by radiation

    International Nuclear Information System (INIS)

    Iwamoto, Takeo

    1976-01-01

    The manufacture and use of wood/plastic composite (WPC) as an example of wood matrix and wood sawdust/plastic composites (SDP) as an example of plastic matrix are reviewed. The raw material for WPC are mostly vinyl monomers, particularly methyl methacrylate and styrene. The reaction in WPC polymerization is radical polymerization. Researches on the radiation sources mostly resulted in gamma-ray. Electron beam can be applied only to thin products. The future use of WPC may be for furnitures, sporting goods, decorative parts and the like. Vital study on the reduction of manufacturing costs is required, for example, the improvement of reaction and the adoption of continuous process must be considered. The raw materials for SDP are wood sawdust, vinyl monomer (mostly methyl methacrylate) and resins. Electron beam accelerators are the most preferable radiation source because of its high efficiency and safe operation. SDP shows good forming property. The most preferable use of SDP is as interior materials for prefabricated houses, for example, opening frames for bath rooms. Some combination of the technologies of wood engineering, chemical engineering and radiation engineering must be established to develop and maintain the demands. The present radiation sources are forced to grow to large scale industrially, but the establishment of radiation source technology which can be enlarged stepwise is important to keep pace with the development. (Iwakiri, K.)

  14. The Investigation of Soft Furniture Upholstery Deformational Behaviour

    Directory of Open Access Journals (Sweden)

    Donata ZUBAUSKIENE

    2012-12-01

    Full Text Available Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into account the differences of applied materials mechanical properties. Otherwise external view and quality of upholstery may be unacceptable due to obvious visual material excess on soft furniture surfaces, which is called pull-on ease. The aim of this investigation was to determine the dependencies between three different levels of soft furniture upholstery pre-tension and corresponding values of pull-on ease. New testing method presented in this study allows defining soft furniture upholstery deformational behaviour and its regularities in respect to the initial dimensions of upholstery patterns.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3099

  15. 2-methylanthraquinone as a marker of occupational exposure to teak wood dust in boatyards.

    Science.gov (United States)

    Gori, Giampaolo; Carrieri, Mariella; Scapellato, Maria Luisa; Parvoli, Giorgio; Ferrara, Daniela; Rella, Rocco; Sturaro, Alberto; Bartolucci, Giovanni Battista

    2009-01-01

    A new gas chromatographic/mass spectrometric (GC/MS) method was developed to detect 2-methylanthraquinone (2-MeA) in wood dust. 2-MeA is present in teak wood (a suspected human carcinogen) but not in oak, beech, mahogany, birch, ash or pine. The method involved collection of workplace dust on filters and extraction of 2-MeA with methanol and GC/MS analysis. The method was tested on teak wood dust samples (n = 43) collected on polyvinylchloride membrane filters during various work operations in four small factories making furniture and fittings for leisure craft and boatyards (air teak wood dust concentration: range 0.32-14.32 mg m(-3)). A high correlation coefficient for the content of 2-MeA versus teak dust was obtained (logarithmic correlation: y = 1.5308x + 0.0998, r = 0.9215). Determination of airborne 2-MeA is a useful technique to confirm occupational exposure to teak wood dust.

  16. POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

    OpenAIRE

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2016-01-01

    Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A nove...

  17. Preliminary studies of Brazilian wood using different radioisotopic sources

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Gilberto; Silva, Leonardo Gondim de Andrade e, E-mail: gcarval@ipen.br, E-mail: ftgasilva@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Due to availability and particular features, wood was one of the first materials used by mankind with a wide variety of applications. It can be used as raw material for paper and cellulose manufacturing; in industries such as chemical, naval, furniture, sports goods, toys, and musical instrument; in building construction and in the distribution of electric energy. Wood has been widely researched; therefore, wood researchers know that several aspects such as temperature, latitude, longitude, altitude, sunlight, soil, and rainfall index interfere with the growth of trees. This behavior explains why average physical-chemical properties are important when wood is studied. The majority of researchers consider density to be the most important wood property because of its straight relationship with the physical and mechanical properties of wood. There are three types of wood density: basic, apparent and green. The apparent density was used here at 12% of moisture content. In this study, four different types of wood were used: 'freijo', 'jequetiba', 'muiracatiara' and 'ipe'. For wood density determination by non-conventional method, Am-241, Ba-133 and Cs-137 radioisotopic sources; a NaI scintillation detector and a counter were used. The results demonstrated this technique to be quick and accurate. By considering the nuclear parameters obtained as half value layers and linear absorption coefficients, Cs-137 radioisotopic source demonstrated to be the best option to be used for inspection of the physical integrity of electric wooden poles and live trees for future works. (author)

  18. THE MARKETING SERVICES ON THE FURNITURE MARKET

    Directory of Open Access Journals (Sweden)

    Flaviu MEGHIŞAN

    2007-01-01

    Full Text Available The distribution of furniture has seen profound changes leading to accelerations of the dynamics of the competition environment, these changes being influenced, among other things, by the diversification of offer comprising new services. Today it seems essential to consider the distribution of furniture as an “industry that creates utility”. Indeed, the consumer is analyzed not only as a function of product characteristics, but as a set of utilities and advantages that distributions propose in their strategies of associated services. The services appear, in the same time, as variables which are applied by the distributor in his strategy to differentiate themselves and as utilities associated to the product, utilities which the consumer - as “problem-solver” - integrates in his decision making process. The consumer buys not just a simple product (furniture, but a global product which includes a sum of jointed attributes and utilities (proximity, product line, point of sale concept, information, warranty, etc.. This paper analyzes the services offer from the distribution of furniture as a method to solve the problems of furniture buyer. From this perspective the paper takes into consideration the various profiles of buying behavior, makes a critical analysis of the structure of services involved, defines a new structure of services based on the phases of buying behavior process.

  19. Learning From the Furniture Scale

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier; Kirkegaard, Poul Henning

    2018-01-01

    Given its proximity to the human body, the furniture scale holds a particular potential in grasping the fundamental aesthetic potential of architecture to address its inhabitants by means of spatial ‘gestures’. Likewise, it holds a technical germ in realizing this potential given its immediate...... tangibility allowing experimentation with the ‘principles’ of architectural construction. In present paper we explore this dual tectonic potential of the furniture scale as an epistemological foundation in architectural education. In this matter, we discuss the conduct of a master-level course where we...

  20. Identifying the customer satisfaction factors in furniture market

    Directory of Open Access Journals (Sweden)

    Majid Azizi

    2017-05-01

    Full Text Available Purpose – the purpose of this research is to identify the influential factors on customer satisfaction in the Iranian furniture market in order to get acquainted with the fundamental items for planning future sales programs with the purposes of extolling competitive advantages. Design/methodology/approach – A commixture of 6 items and 31 factors were educed from interviewing with 20 experts in furniture designing and manufacturing industry. The collected data from customer need indexes in previous research were also used. Findings – results showed that such factors as economic factors weighting 0.32, product specifications weighting 0.21 and credibility weighting 0.19 were the most important indexes and price weighting 0.195, fame weighting 0.131, quality, durability and resistance weighting 0.116, paying conditions weighting 0.095, designing and decorating in virtual softwares before ordering weighting 0.074, updatedness weighting 0.064 and interaction approach with the weight of 0.42 were the most considerable influential sub-indexes on the satisfaction of the Iranian furniture market customers. Research limitations/implications – by the enhancement of competition throughout the world markets and the inevitable presence of Iran in it, the market activists’ concentration should shift towards paying comprehensive attention to desires and needs of furniture market customers. Practical implications – some important issues on planning suitable manufacturing and marketing programs in furniture market are introduce so that the activists be aware of considering the growing knowledge and awareness of end-users which increases the pressure on the manufacturer side. There are also some solutions in terms of internal and external organizational factors with regard to the complex nature of competitive environment in furniture market. Originality/value – the paper provides an examination of effective factors on customer satisfaction with a

  1. Poverty alleviation aspects of successful improved household stoves programmes

    International Nuclear Information System (INIS)

    2000-01-01

    Programmes to improve household wood and charcoal stove efficiencies have been launched throughout the developing world over the past 20 years. Their main driver has been to reduce environmental degradation resulting from the removal of trees for charcoal and fuel wood production. In addition, health benefits arise from the reduction or removal of smoke in people's homes. Unfortunately, many programmes have failed to establish sustainable improved stove production - primarily through lack of sufficient attention to consumer tastes and market dynamics. This project, carried out in Kenya, Ethiopia and Uganda, has identified key success factors for sustainable stove production and supply by determining the poverty impacts of successful, commercially-based, improved household biomass stove programmes on producers, consumers and others associated with the household fuel and stove supply and end-use business. (author)

  2. About furniture. Before and after Ptolomaeus Philadelphos' pavilion

    Directory of Open Access Journals (Sweden)

    Elena Calandra

    2010-07-01

    Full Text Available The furniture is of primary importance towards the canopies definition, more than the architectonic structure: they  contribute, in fact, in creating and organizing the spaces, so that there is almost no distinction between furniture and structure, as it is possible to observe in the ancient sources of different periods (Herodotus, Euripides, Julius Caesar, Plutarchus, Athenaeus: the pavilions of Xerxes at Plataia, of Ion at Delphi, of Alexander after the Issa battle and at Susa, of Pompey at Pharsalos, as well as the Ptolomaeus's canopy at Alexandria. At the same time, the furniture language is studied, signifying the power and the force of the sovereign through the luxurious materials and surprising the spectators.      At the end, some hypotheses on the final destination of the furniture, after dismantling the Ptolomaeus' canopy, equiped for one year.

  3. Lean and Virginia's wood industry - Part II: Results and need for support

    Directory of Open Access Journals (Sweden)

    Christian F. Fricke

    2012-11-01

    Full Text Available This two-part publication about Lean practices by Viriginia’s wood products and furniture manufacturing industries reports results from researching the awareness, the implementation status, the business results, and the need for external implementation support of Virginian companies. This second manuscript focuses on business results and the need for external implementation support. Except for “sales per employee,” where less than half of respondents reported an improvement due to the implementation of Lean in their operation, a majority of respondents indicated improved business results for “lead time,” “on-time delivery,” “inventory turnover,” and “cost per unit.” With respect to the need for external Lean implementation support, only 23 percent of respondents answered in the affirmative. “Training management,” “training shop floor employees,” and “implementing [Lean] with extensive employee involvement” were, with 67, 58, and 48 percent frequencies, the most often named forms of Lean implementation support requested. Results from this study seem to indicate an opportunity to support the well-being of Virginia’s wood products and furniture manufacturing industries through improved communication of the benefits of Lean and offering specific types of training to companies.

  4. IMPACT OF ECONOMIC CRISIS ON WOOD MARKETS (CONSUMPTION, PRODUCTION AND TRADE

    Directory of Open Access Journals (Sweden)

    Maria‐Loredana POPESCU

    2013-12-01

    Full Text Available Global economic crisis represents one of the causes why wood consumption is increasing especially in countries less developed. In countries where governments couldn’t improve the quality of life and unemployment rate is higher, local communities devastate a lot of forestry. In last thirty years we saw a deforestation process at the global level related to land being converted to other uses: agriculture and urbanization, which represent a positive trend of a negative use. The statistics reveal, on one hand, an increasing demand for paper, paper products, wood products and wood energy. So this point is important to analyze: where wood came from and where it is going as either raw material or processed goods? For undeveloped countries, like Romania, it is easy to export primary wood product without evaluating the consequences. On the other hand, developed countries like Sweden export value added products which brig them higher value and profits and require greater manufacturing and marketing skills (case IKEA. For this, government policy could introduce trade barriers to decrease log consumption (like export taxes and simultaneously support furniture production and trade (e.g. export.

  5. How to improve the performance of UV cured wood coatings?

    International Nuclear Information System (INIS)

    Mariane Poitoux

    2007-01-01

    Adhesion, scratch and wear resistance are key properties for industrial wood coatings, both for furniture and parquet flooring. Different techniques can be used to evaluate the performances of a coating and results can be strongly affected only by changing the measuring tool used. This paper will explain the different methods available to assess the adhesion, the scratch and wear resistance and their relevancy. The role played by the different oligomers and monomers will be shown, as the impact of the photoinitiator package. (Author)

  6. BASIC PROPERTIES IN RELATION TO DRYING PROPERTIES OF THREE WOOD SPECIES FROM INDONESIA

    Directory of Open Access Journals (Sweden)

    Efrida Basri

    2005-03-01

    Full Text Available The objectives of this study were to investigate basic and drying properties of three wood species from Indonesia, i.e. kuda (Lannea coromandelica Merr., waru (Hibiscus tiliaceus L. and mindi besar (Melia dubia Cav.. The basic properties include density, shrinkages, modulus of rupture (MOR, compression parallel to grain (C//, wood strength and anatomical structures. Meanwhile, the drying properties included drying time and drying defects. The initial-final temperature and humidity for each species was based on defects that resulted from high temperature drying trial. The results showed that the drying properties were significantly affected by wood anatomical structure. The initial-final drybulb temperature and wetbulb depression   for kuda wood are 50 -70ºC and 3-30ºC respectively, while the corresponding figures for waru wood are 65-80ºC and 6-30ºC, and for mindi besar wood are 55-80ºC and 4-30ºC. These drying schedules, however, still need further trial prior to their implementation in the factory-scale operation. All wood species studied have density and considerable strength recommended in their use for light medium construction purposes. Mindi besar wood has decorative appearance so it is suitable for furniture.

  7. Intelligent Furniture Design in the Elderly Based on the Cognitive Situation

    Directory of Open Access Journals (Sweden)

    Lu Xinhui

    2017-01-01

    Full Text Available This paper analyzes the present situation of Chinese elderly furniture and the elderly has cognitive characteristics that consciousness experiences and recognitions recede, cognitive fuzzy from Information processing. Expounds the elderly intelligent furniture design elements: functional elements required the elderly furniture is easy and simple to handle; Size and shape elements should be biased towards low, light type, reduce multifunction or fold function; colour collocation should use low lightness and low purity natural materials; Emotional elements design should meet the demand of the elderly social emotion. Introduction of intelligent furniture make up the cognitive decline in the elderly, Furniture judge the elderly demand by the inductor, Supplement by hardware control module to solve the special needs of the elderly life. Build design thinking based on the cognitive process and explore the elderly intelligent furniture design. This paper discusses the design process, for example and concludes the design rules: 1.The Operating Experience Pleasure. It is the height matching of user expectation and furniture function. Pleasure in the design of the operating parts mainly embodies in two aspects. Firstly, the Fitts Law; Secondly, it’s The Movement Optimization. 2.”Unconscious” Design. Intelligent furniture need to delete unnecessary operation module, make it easy to understand, furniture function and cognitive scene match with each other. 3. Modularity Design. Modularization can indirectly regulate the scale and specification of the design. Under the premise of individual character, customization, the compression of the cost, Designer should make the elderly intelligent furniture consistent with the user action.4.Design Consistency. The consistency principle reflected in the appearance, color and operation way consistency.

  8. The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

    OpenAIRE

    Wang Lin; He Jinfeng; Xu Songjie

    2017-01-01

    In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber...

  9. Processing bulk natural wood into a high-performance structural material

    Science.gov (United States)

    Song, Jianwei; Chen, Chaoji; Zhu, Shuze; Zhu, Mingwei; Dai, Jiaqi; Ray, Upamanyu; Li, Yiju; Kuang, Yudi; Li, Yongfeng; Quispe, Nelson; Yao, Yonggang; Gong, Amy; Leiste, Ulrich H.; Bruck, Hugh A.; Zhu, J. Y.; Vellore, Azhar; Li, Heng; Minus, Marilyn L.; Jia, Zheng; Martini, Ashlie; Li, Teng; Hu, Liangbing

    2018-02-01

    Synthetic structural materials with exceptional mechanical performance suffer from either large weight and adverse environmental impact (for example, steels and alloys) or complex manufacturing processes and thus high cost (for example, polymer-based and biomimetic composites). Natural wood is a low-cost and abundant material and has been used for millennia as a structural material for building and furniture construction. However, the mechanical performance of natural wood (its strength and toughness) is unsatisfactory for many advanced engineering structures and applications. Pre-treatment with steam, heat, ammonia or cold rolling followed by densification has led to the enhanced mechanical performance of natural wood. However, the existing methods result in incomplete densification and lack dimensional stability, particularly in response to humid environments, and wood treated in these ways can expand and weaken. Here we report a simple and effective strategy to transform bulk natural wood directly into a high-performance structural material with a more than tenfold increase in strength, toughness and ballistic resistance and with greater dimensional stability. Our two-step process involves the partial removal of lignin and hemicellulose from the natural wood via a boiling process in an aqueous mixture of NaOH and Na2SO3 followed by hot-pressing, leading to the total collapse of cell walls and the complete densification of the natural wood with highly aligned cellulose nanofibres. This strategy is shown to be universally effective for various species of wood. Our processed wood has a specific strength higher than that of most structural metals and alloys, making it a low-cost, high-performance, lightweight alternative.

  10. Optimization of inventory management in furniture manufacturing

    OpenAIRE

    Karkauskas, Justinas

    2017-01-01

    Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

  11. Anthropometric evaluation of the Creches children furniture in Turkey.

    Science.gov (United States)

    Barli, Onder; Sari, Reyhan Midilli; Elmali, Derya; Aydintan, Erkan

    2006-12-01

    The dimensions of the living and working space and buildings, the types of material and different riggings should be designed to conform to the users' anthropometric measures. The first requirement to design on ergonomic system is to measure the human being who will work and live in that system. Because of this, anthropometric measures are the most frequently used ergonomic data during the design process. In this research paper, we attempt to organize a new data base of anthropometric data to use in the design of children's equipment and furniture used in crèches. A starting point for research on the proper dimensions of creche furniture is to investigate how the dimensions of furniture reflect the body dimensions and the functional needs of the children using furniture. The anthropometric data of 3, 4 and 5 year-old-children in crèches was used. We report the results of the measurements of 18 anthropometric characteristics of children which constitute a set of basic data for the design of functional spaces and furniture.

  12. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    USER

    2010-05-24

    May 24, 2010 ... the Nigeria furniture industry though operating at abysmal performance has been ... placed the number of major wooden furniture industry in. *Corresponding author. ..... Demand complementarities, retail assortments and the ...

  13. The Influence of Furniture on Air Velocity in a Room

    DEFF Research Database (Denmark)

    Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

    Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room. Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set......-up is simulated with one of the inlets where a volume resistance represents the furniture....

  14. Household energy demand in Kenya: An application of the linear approximate almost ideal demand system (LA-AIDS)

    International Nuclear Information System (INIS)

    Ngui, Dianah; Mutua, John; Osiolo, Hellen; Aligula, Eric

    2011-01-01

    This paper estimates price and fuel expenditure elasticities of demand by applying the linear Approximate Almost Ideal Demand system (LA-AIDS) to 3665 households sampled across Kenya in 2009. The results indicate that motor spirit premium (MSP), automotive gas oil (AGO) and lubricants are price elastic while fuel wood, kerosene, charcoal, liquefied petroleum gas (LPG) and electricity are price inelastic. Kerosene is income elastic while fuel wood, charcoal, LPG, electricity, MSP and AGO are income inelastic. The results also reveal fuel stack behaviour, that is, multiple fuel use among the households. Main policy implications of the results include increasing the penetration of alternative fuels as well as provision of more fiscal incentives to increase usage of cleaner fuels. This not withstanding however, the household income should be increased beyond a certain point for the household to completely shift and use a new fuel. - Highlights: → Fuel wood, kerosene, charcoal, LPG and electricity are price inelastic. → Kerosene is income elastic. → Fuel wood, charcoal, electricity, LPG, MSP and AGO are income inelastic. → Results reveal fuel stack behaviour among the households. → Income should be increased beyond a certain point to facilitate fuel switch.

  15. Household energy demand in Kenya: An application of the linear approximate almost ideal demand system (LA-AIDS)

    Energy Technology Data Exchange (ETDEWEB)

    Ngui, Dianah, E-mail: ngui.diana@ku.ac.ke [Kenyatta University, P.O. Box 43844-00100, Nairobi (Kenya); Kenya Institute for Public Policy Research and Analysis, P.O. Box, 56445-00200, Nairobi (Kenya); Mutua, John [Energy Regulatory Commission, P.O. Box 42681-00100, Nairobi (Kenya); Osiolo, Hellen; Aligula, Eric [Kenya Institute for Public Policy Research and Analysis, P.O. Box, 56445-00200, Nairobi (Kenya)

    2011-11-15

    This paper estimates price and fuel expenditure elasticities of demand by applying the linear Approximate Almost Ideal Demand system (LA-AIDS) to 3665 households sampled across Kenya in 2009. The results indicate that motor spirit premium (MSP), automotive gas oil (AGO) and lubricants are price elastic while fuel wood, kerosene, charcoal, liquefied petroleum gas (LPG) and electricity are price inelastic. Kerosene is income elastic while fuel wood, charcoal, LPG, electricity, MSP and AGO are income inelastic. The results also reveal fuel stack behaviour, that is, multiple fuel use among the households. Main policy implications of the results include increasing the penetration of alternative fuels as well as provision of more fiscal incentives to increase usage of cleaner fuels. This not withstanding however, the household income should be increased beyond a certain point for the household to completely shift and use a new fuel. - Highlights: > Fuel wood, kerosene, charcoal, LPG and electricity are price inelastic. > Kerosene is income elastic. > Fuel wood, charcoal, electricity, LPG, MSP and AGO are income inelastic. > Results reveal fuel stack behaviour among the households. > Income should be increased beyond a certain point to facilitate fuel switch.

  16. Street furniture concept in Pasar Buah and Bukit Gundaling Based on place identity

    Science.gov (United States)

    Ginting, Nurlisa; Vinky Rahman, N.; Delianur Nasution, Achmad; Nawawiy Loebis, M.; Sinaga, Fitri A.

    2018-03-01

    Tourism is one of the largest sources of the foreign exchange for a country, that encourage many developers to develop it. Karo District located in the province of North Sumatera, Indonesia, which has many tourist destinations with natural and cultural resources, including Pasar Buah and Bukit Gundaling. To develop Tourism, one of way is with increasing place identity in tourist destinations. Unfortunately, place identity in Pasar Buah and Bukit Gundaling are still lacking, so it needs improvement, one of that is the Street furniture in Pasar Buah and Bukit Gundaling. This study aims to design the concept of the Street furniture planning in Pasar Buah and Bukit Gundaling. The method used is a qualitative method, that is design street furniture using five groups elements of street furniture: decorative element, service furniture, trade furniture, signaling furniture, and advertisement furniture. The result of this study is the concept of the design street furniture of Pasar Buah and Bukit Gundaling, which can use to improve place identity in tourism of Karo District.

  17. Wood Stove Pollution in the Developed World: A Case to Raise Awareness Among Pediatricians.

    Science.gov (United States)

    Rokoff, Lisa B; Koutrakis, Petros; Garshick, Eric; Karagas, Margaret R; Oken, Emily; Gold, Diane R; Fleisch, Abby F

    2017-06-01

    Use of wood for residential heating is regaining popularity in developed countries. Currently, over 11 million US homes are heated with a wood stove. Although wood stoves reduce heating costs, wood smoke may adversely impact child health through the emission of gaseous and particulate air pollutants. Our purpose is to raise awareness of this environmental health issue among pediatricians. To summarize the state of the science, we performed a narrative review of articles published in PubMed and Web of Science. We identified 36 studies in developed countries that reported associations of household wood stove use and/or community wood smoke exposure with pediatric health outcomes. Studies primarily investigated respiratory outcomes, with no evaluation of cardiometabolic or neurocognitive health. Studies found community wood smoke exposure to be consistently associated with adverse pediatric respiratory health. Household wood stove use was less consistently associated with respiratory outcomes. However, studies of household wood stoves always relied on participant self-report of wood stove use, while studies of community wood smoke generally assessed air pollution exposure directly and more precisely in larger study populations. In most studies, important potential confounders, such as markers of socioeconomic status, were unaccounted for and may have biased results. We conclude that studies with improved exposure assessment, that measure and account for confounding, and that consider non-respiratory outcomes are needed. While awaiting additional data, pediatricians can refer patients to precautionary measures recommended by the US Environmental Protection Agency (EPA) to mitigate exposure. These include replacing old appliances with EPA-certified stoves, properly maintaining the stove, and using only dry, well-seasoned wood. In addition, several studies have shown mechanical air filters to effectively reduce wood stove pollution exposure in affected homes and

  18. Occupational injuries in the Finnish furniture industry.

    Science.gov (United States)

    Aaltonen, M V

    1996-06-01

    The purpose of the study was to determine the types of occupational injuries that occur in the Finnish furniture industry and to see whether they differ as regards production type and company size. During a one-year registration period accident events, the actual and potential severity of the injuries, the causes of the accidents, and the measures needed to prevent such accidents were examined in 18 Finnish furniture factories of different types. An analysis of covariance determined the variables affecting the actual and potential severity of the injuries. The 214 accidents registered were lost-time injuries; two of them resulted in slight partial loss of fingertips. The disabling injury rate was 14.4 per 100 workers per year. Wooden furniture production and kitchen cupboard production in large companies had the highest rate. Accidents involving machines comprised half of the material. Saws were the most common machine type. Forty-two percent of the injuries could have been more severe; one injury could have been fatal. The injured persons and their foremen identified the causal factors of the accidents and the needed safety countermeasures well. Sixty-six percent of the causes and 65% of the safety countermeasures were associated with the actions of the workers and the workplace procedures. Nevertheless, only 6% of the identified safety countermeasures were put into force. It was estimated that, in 1987, 2000 on-site accidents leading to at least first-aid at some health care center occurred in the Finnish furniture industry. Special efforts should be taken to improve safety in furniture production in Finland.

  19. Switzerland's largest wood-pellet factory in Balsthal

    International Nuclear Information System (INIS)

    Stohler, F.

    2004-01-01

    This article describes how a small Swiss electricity utility has broken out of its traditional role in power generation and the distribution of electricity and gone into the production of wood pellets. The pellets, which are made from waste wood (sawdust) available from wood processing companies, are produced on a large scale in one of Europe's largest pellets production facilities. The boom in the use of wood pellets for heating purposes is discussed. The article discusses this unusual approach for a Swiss power utility, which also operates a wood-fired power station and is even involved in an incineration plant for household wastes. The markets being aimed for in Switzerland and in Europe are described, including modern low-energy-consumption housing projects. A further project is described that is to use waste wood available from a large wood processing facility planned in the utility's own region

  20. Analysis of polyethylene terephthalate PET plastic bottle jointing system using finite element method (FEM)

    Science.gov (United States)

    Zaidi, N. A.; Rosli, Muhamad Farizuan; Effendi, M. S. M.; Abdullah, Mohamad Hariri

    2017-09-01

    For almost all injection molding applications of Polyethylene Terephthalate (PET) plastic was analyzed the strength, durability and stiffness of properties by using Finite Element Method (FEM) for jointing system of wood furniture. The FEM was utilized for analyzing the PET jointing system for Oak and Pine as wood based material of furniture. The difference pattern design of PET as wood jointing furniture gives the difference value of strength furniture itself. The results show the wood specimen with grooves and eclipse pattern design PET jointing give lower global estimated error is 28.90%, compare to the rectangular and non-grooves wood specimen of global estimated error is 63.21%.

  1. The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Wang Lin

    2017-01-01

    Full Text Available In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber physical system( CPS to cover the intelligent network.

  2. Microfabricated Formaldehyde Gas Sensors

    Directory of Open Access Journals (Sweden)

    Karen C. Cheung

    2009-11-01

    Full Text Available Formaldehyde is a volatile organic compound that is widely used in textiles, paper, wood composites, and household materials. Formaldehyde will continuously outgas from manufactured wood products such as furniture, with adverse health effects resulting from prolonged low-level exposure. New, microfabricated sensors for formaldehyde have been developed to meet the need for portable, low-power gas detection. This paper reviews recent work including silicon microhotplates for metal oxide-based detection, enzyme-based electrochemical sensors, and nanowire-based sensors. This paper also investigates the promise of polymer-based sensors for low-temperature, low-power operation.

  3. Longitudinal lung function decline and wood dust exposure in the furniture industry

    DEFF Research Database (Denmark)

    Jacobsen, G.; Schluenssen, V.; Schaumburg, I.

    2008-01-01

    , including smoking, height and age. An additional difference of -14.50 mL.yr(-1) and -27.97 mL.yr(-1) was revealed for females exposed to 3.75-4.71 mg.yr.m(-3) or to >4.71 mg-yr.m(-3), respectively, compared with non-/Iow-exposed females. For females, a positive trend between wood dust exposure...

  4. Characterization of household waste in Greenland

    DEFF Research Database (Denmark)

    Eisted, Rasmus; Christensen, Thomas Højlund

    2011-01-01

    The composition of household waste in Greenland was investigated for the first time. About 2tonnes of household waste was sampled as every 7th bag collected during 1week along the scheduled collection routes in Sisimiut, the second largest town in Greenland with about 5400 inhabitants....... The collection bags were sorted manually into 10 material fractions. The household waste composition consisted primarily of biowaste (43%) and the combustible fraction (30%), including anything combustible that did not belong to other clean fractions as paper, cardboard and plastic. Paper (8%) (dominated...... by magazine type paper) and glass (7%) were other important material fractions of the household waste. The remaining approximately 10% constituted of steel (1.5%), aluminum (0.5%), plastic (2.4%), wood (1.0%), non-combustible waste (1.8%) and household hazardous waste (1.2%). The high content of biowaste...

  5. Business plan for a Chinese furniture company

    OpenAIRE

    Wang, Haodi

    2016-01-01

    Abstract As a popular consumable, marketing costs of furniture are directly related to the benefits of manufacturing enterprise. Nowadays, most furniture manufacturing enterprises still adopt the traditional marketing strategy, which is single-directional, indirect and hierarchical strategy. It is not only difficult to meet the various and individual customers needs but also expensive for enterprises to exploit the market. Meanwhile, it prevents enterprises from following the market needs....

  6. Longitudinal lung function decline and wood dust exposure in the furniture industry

    DEFF Research Database (Denmark)

    Jacobsen, Gitte; Schlünssen, V; Schaumburg, I

    2007-01-01

    for confounders, including smoking, height and age. An additional difference of -14.50 mL x yr(-1) and -27.97 mL x yr(-1) was revealed for females exposed to 3.75-4.71 mg x yr x m(-3) or to >4.71 mg x yr x m(-3), respectively, compared with non-/low-exposed females. For females, a positive trend between wood dust...

  7. Household energy, air pollution and health in Maputo

    Energy Technology Data Exchange (ETDEWEB)

    Ellegaard, A.

    1997-05-01

    A survey was carried out in 1188 low-income households in Maputo, Mocambique, in order to assess the degree of exposure to air pollution and health effects associated with this exposure. The hypothesis was that pollution from biomass fuels, especially wood, impairs the health of the women using them, and that it would be possible to discern this effect in a general population. Average exposure levels during cooking time were found to be high, with a level of respirable particulates at 1200, 540 and 380 {mu}g/m{sup 3} for wood, charcoal and electricity users respectively. Similarly carbon monoxide levels were 42, 37 and 5 ppm for the same groups. Wood users were found to have significantly more symptoms of respiratory problems than users of other fuels, but also significantly more symptoms that could not be immediately associated with household fuel pollution. Thus, wood users had lower literacy, poorer housing, and more primitive access to water and sanitation. There was little difference in health aspects between charcoal users and users of modern fuels, though exposure to air pollution was higher among charcoal users. In statistical analysis it was found that cough were significantly associated with the use of wood as a principal fuel, but not with the use of charcoal. Other variables that influenced the health outcome were the age when a woman started helping her mother to cook, daily cooking time and kitchen ventilation. Most of the variables associated to ill health were correlated to wood use. In contrast, charcoal use was associated with a better health status in many respects. From the point of pollution exposure and health, wood use should be limited, while charcoal appears to be a feasible intermediate substitute for wood in the short term in Maputo. 48 refs, 31 figs, 33 tabs

  8. Household energy, air pollution and health in Maputo

    International Nuclear Information System (INIS)

    Ellegaard, A.

    1997-01-01

    A survey was carried out in 1188 low-income households in Maputo, Mocambique, in order to assess the degree of exposure to air pollution and health effects associated with this exposure. The hypothesis was that pollution from biomass fuels, especially wood, impairs the health of the women using them, and that it would be possible to discern this effect in a general population. Average exposure levels during cooking time were found to be high, with a level of respirable particulates at 1200, 540 and 380 μg/m 3 for wood, charcoal and electricity users respectively. Similarly carbon monoxide levels were 42, 37 and 5 ppm for the same groups. Wood users were found to have significantly more symptoms of respiratory problems than users of other fuels, but also significantly more symptoms that could not be immediately associated with household fuel pollution. Thus, wood users had lower literacy, poorer housing, and more primitive access to water and sanitation. There was little difference in health aspects between charcoal users and users of modern fuels, though exposure to air pollution was higher among charcoal users. In statistical analysis it was found that cough were significantly associated with the use of wood as a principal fuel, but not with the use of charcoal. Other variables that influenced the health outcome were the age when a woman started helping her mother to cook, daily cooking time and kitchen ventilation. Most of the variables associated to ill health were correlated to wood use. In contrast, charcoal use was associated with a better health status in many respects. From the point of pollution exposure and health, wood use should be limited, while charcoal appears to be a feasible intermediate substitute for wood in the short term in Maputo. 48 refs, 31 figs, 33 tabs

  9. Furniture firms shuns CSL for EMS program expansion

    Energy Technology Data Exchange (ETDEWEB)

    Deans, B

    1982-05-31

    The R.B. Furniture Company's disappointment in its 10 CSL Industries Inc. energy-management systems is responsible for a decision to install Trimax Controls in the remaining 67 stores. At issue are CSL's service policy of using independent installers and service contractors as well as technical problems with the equipment, although R.B. Furniture concedes it had a 2.5-year payback, a 20% drop in electricity consumption, and generally reliable performance of the CSL system. A CSL official claims its higher equipment costs are the real reason. Interviews with CSL and R.B. Furniture Co. representatives explore the attitudes and problems of both firms. The Trimex system includes a three-year warranty. (DCK)

  10. Furniture Industry in Kenya : Situational Analysis and Strategy

    OpenAIRE

    Creapo Oy; World Bank Group

    2015-01-01

    The Government of Kenya recognizes that the performance of the furniture sector is crucial both to employment and growth in the country. The Ministry of Industrialization and Enterprise Development (MOIED) therefore requested an analysis of both the furniture and timber sectors, in order to understand their current state of development, their main constraints, and the interventions necessa...

  11. ASPECTS REGARDING WOOD WELDING IN THE CONTEXT OF APPLICABILITY IN THE LEAST DEVELOPED COUNTRIES

    Directory of Open Access Journals (Sweden)

    Ramona-Elena DUMITRAȘCU

    2015-12-01

    Full Text Available Furniture, as traditional sector in Romania, is one of the few areas that bring profit. It is a field that contributes to the economical competitiveness through the variety of products for import and export. In this context, joining wood is essential for the production of wood products. Therefore, knowing the environmentally-friendly methods for wood joints could lead to performance and progress. Welding technology of wood as an alternative method to bonding wood elements or wooden structures has not been addressed in Romania until now. The paper presents a review performed with the aim of contribute to the knowledge of this innovative technology, to show the problems and the possibilities, of least developed countries, to contribute at this area of reasearch. The general aim is to present the main methods and to analyze their advantages and disadvantages in the context of development in the least developed countries. The results showed that both methods, at low and hight temperature, has benefits but there are and some economic and knowledge barriers for extended the technology.The overall conclusion of this research is to find efficient solutions for wood welding in order to obtain new better and cleaner wood products

  12. Analysis of Value Chain Governance: Scenarios to Develop Small-Scale Furniture Producers

    Directory of Open Access Journals (Sweden)

    Rika Harini Irawati

    2011-05-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Furniture industry had shown a long chain of production to consumption, from raw material producers (tree growers, semi-finished producers, finished product producers, and retailers to exporters. Jepara as a centre furniture industry in Indonesia incorporates around 15,000 business units and provide livelihoods to approximately 170,000 workers. This sector contributes about 27% of Jepara‘s people domestic income. Small and medium furniture enterprises (SMEs have significant roles in the furniture industry as production structures are characterized by them. Power and information imbalance throughout the furniture value chain have resulted in problems of uneven distribution of gains among actors of the industry. SME furniture producers have experienced an unfair value added distribution. Hence, development of SMEs is important for strengthening the industry and expected to result in a portion of value added distribution to them.  We are trying to develop scenarios for SME improvement in the furniture industry in Jepara by identifying their problems and implementing Value Chain Analysis (VCA. VCA is an approach to describe SME producer relations with other actors in the industry and the governance type of their relations. Data is collected by interviewing selected SMEs from the association of small scale producers in Jepara to get detailed maps of their value chain. The research will produce future scenarios and intervention points to improve small-scale producer sustainability and better value added distribution among furniture actors. The scenarios will not only benefit selected producers but also the furniture industry of Jepara, and can be adopted for similar industries throughout Indonesia and abroad. Keywords: furniture, value chain, governance, scenario, small-scale

  13. Sustainability effects of household-scale biogas in rural China

    International Nuclear Information System (INIS)

    Gosens, Jorrit; Lu, Yonglong; He, Guizhen; Bluemling, Bettina; Beckers, Theo A.M.

    2013-01-01

    Households in rural China rely heavily on low quality fuels which results in reduced quality of life and environmental degradation. This study assesses the comparative contribution of household scale biogas installations to the broad set of sustainability objectives in the Chinese biogas policy framework, which targets household budget, fuel collection workload, forest degradation, indoor air quality and health, renewable energy supply, and climate change. A household survey was used to determine how biogas affected consumption levels of crop residues, fuel wood, coal, LPG, and electricity. Biogas users were found to reduce consumption of biomass fuels but not coal. Although LPG is not a highly commonly used fuel in rural China, biogas users nearly cease to use it altogether. A big reduction in fuel wood consumption results in strongly reduced workload and forest degradation. Although household scale biogas has alleviated all sustainability issues targeted by Chinese policies, low quality fuel use remains abundant, even in households using biogas. Continued promotion of the construction of biogas installations is advisable, but additional policies are needed to ensure higher quality heating energy supply and cleaner uses of biomass fuels. - Highlights: ► Household biogas alleviated all sustainability issues targeted by policy. ► Biogas users consume less biomass fuels, much less LPG, but similar amounts of coal. ► Strongest sustainability effects are reduced workload and forest degradation. ► Household budget effects are slight as commercial cooking fuel use is limited. ► Low quality fuel use remains abundant and further policy efforts are needed

  14. 41 CFR 109-25.104 - Acquisition of office furniture and office machines.

    Science.gov (United States)

    2010-07-01

    ... furniture and office machines. 109-25.104 Section 109-25.104 Public Contracts and Property Management... furniture and office machines. DOE offices and designated contractors shall make the determination as to whether requirements can be met through the utilization of DOE owned furniture and office machines. ...

  15. Greater utilization of wood residue fuels through improved financial planning

    International Nuclear Information System (INIS)

    Billings, C.D.; Ziemke, M.C.; Stanford, R.

    1991-01-01

    Recent events have focused attention on the promotion of greater utilization of biomass fuel. Considerations include the need to reduce increases in global warming and also to improve ground level air quality by limiting the use of fossil fuels. However, despite all these important environmentally related considerations, economics remains the most important factor in the decision process used to determine the feasibility of using available renewable fuels instead of more convenient fossil fuels. In many areas of the Southeast, this decision process involves choosing between wood residue fuels such as bark, sawdust and shavings and presently plentiful natural gas. The primary candidate users of wood residue fuels are industries that use large amounts of heat and electric power and are located near centers of activity in the forest products industry such as sawmills, veneer mills and furniture factories. Given that such facilities both produce wood residues and need large amounts of heat and electricity, it is understandable that these firms are often major users of wood-fired furnaces and boilers. The authors have observed that poor or incomplete financial planning by the subject firms is a major barrier to economic utilization of inexpensive and widely available renewable fuels. In this paper, the authors suggest that wider usage of improved financial planning could double the present modest annual incidence of new commercial wood-fueled installation

  16. EFFECTS OF EXTRACTIVES AND DENSITY ON NATURAL RESISTANCE OF WOODS TO TERMITE Nasutitermes corniger

    Directory of Open Access Journals (Sweden)

    Juarez Benigno Paes

    2015-12-01

    Full Text Available The evaluation of the natural resistance of wood to wood-destroying organisms is of fundamental importance in the choice of species to be used in buildings and furniture industry. Thus, the effects of extractives and wood density on biological resistance of Acacia mangium, Casuarina equisetifolia, Corymbia torelliana, Eucalyptus cloeziana, Tectona grandis and Caesalpinia echinata woods to the xylophagous termite Nasutitermes corniger was evaluated under laboratory conditions. Test samples, with dimensions of 2.00 x 2.54 x 0.64 cm (radial x tangential x longitudinal in four positions in pith-bark direction (internal heart, intermediate heart, outer heart and sapwood were taken. The woods were exposed to termite action for 28 days in no-choice feeding test. The samples not selected for the termite test were turned into sawdust and the extractive contents were obtained using the shavings that passed through the sieve of 40 and were retained in the sieve of 60 mesh. The wood natural resistance, within the pith-bark positions, for the studied species, is not correlated with the density and extractive content. However, among the woods, those with higher density and extractive content are more resistant. The woods with greater biological resistance to the termite Nasutitermes corniger (smaller mass loss, waste and survival time of insects are Corymbia torelliana and Caesalpinia echinata and of less resistance is Casuarina equisetifolia.

  17. Customer Relationship within the Furniture Design Market : A qualitative study of how companies within the furniture design market relate to the challenges connected to customer loyalty

    OpenAIRE

    Wahlström, Marie-Louise; Bergström, Jenny

    2010-01-01

    Background: The customer relationship is becoming more important for companies within the Swedish furniture design industry due to competition for market shares. The market is getting more crammed while the interest for furniture design amongst people is increasing, therefore furniture design companies need to find effective ways to attract loyal customers. Research has been made to show the importance of collaboration between companies and this is something that can increase the market share...

  18. Transfer soil-wood of radionuclides of uranium decay series

    International Nuclear Information System (INIS)

    Deus, P.; Petschat, U.; Schmidt, P.

    1998-01-01

    The radionuclide transfer soil-plant is an essential feature for radioecological characterisation of the biosphere. Beside of plants used only for nutrition purposes also plants have to be investigated which are used otherwise intensively or over long periods by humans. This e.g. comes true in the case of wood which as timber or furniture in buildings could be the reason of radiation expositions of inhabitants. In this work by means of experimental investigations for 226 Ra, 210 Pb, 210 Po, 238 U and 227 Ac transfer factors of wood grown on areas used formerly by uranium mining are estimated. The dependence of transfer factors on specific activity in soil is determined. It is shown that in the case of higher soil activities transfer factors of wood are comparable with factors published for other vegetation. As a rule no linear dependence of plant activity on soil activity has been found. As known from other radionuclides saturations take place which result in an upper level of activity in the plants. An effective dose estimation in the case of typical applications shows as a rule no remarkable radioecological risk due to wood grown on mining areas with the exception of processes including radionuclide enrichment. In latter cases and for wood grown on areas with soil activities >1 000 Bq/kg with respect to a general radiation protection precaution duty and aspects of licence problems, however, a case-to-case decision is recommended. (orig.) [de

  19. Proxemic Transitions: Designing Shape-Changing Furniture for Informal Meetings

    DEFF Research Database (Denmark)

    Grønbæk, Jens Emil; Korsgaard, Henrik; Petersen, Marianne Graves

    2017-01-01

    Shape-changing interfaces is an emerging field in HCI that explores the qualities of physically dynamic artifacts. At furniture-scale such dynamic artifacts have the potential of changing the ways we collaborate and engage with spaces. In- formed by theories of proxemics, empirical studies...... of informal meetings and design work with shape-changing furniture, we develop the notion of proxemic transitions. We present three design aspects of proxemic transitions: transition speed, step- wise reconfiguration, and situational flexibility. The design aspects focus on how to balance between physical...... between a table and a board surface. These contributions outline important aspects to consider when designing shape-changing furniture....

  20. A comparative study of three different kinds of school furniture.

    Science.gov (United States)

    Aagaard, Jens; Storr-Paulsen, Annette

    1995-05-01

    Several studies indicate that the ISO standards for school furniture seem to be inappropriate, and there is increasing evidence that the inclination of the seat should be forward and that it should be possible to adjust the table-top to a certain non-horizontal angle. However, these studies have predominantly used objective measurement methods on adult subjects for short-term experiments in rather artificial surroundings. By means of structured interviews registering the school children's perception of ergonomic comfort, the present study has compared three types of school furniture-the original ISO-standard type, and two different new types characterized by forward slanting seats and tiltable desk-tops, the main difference between the two being approximately 15 cm in the height of the chair as well as the table. The study showed that the highest of the two tilting types was perceived to be significantly better than the two others in terms of table height, chair height, reading position, back-rest, and global assessment. Likewise, the feature of a tiltable table-top was considered overwhelmingly positive independently of the height of the furniture. It is recommended that school authorities, producers of school furniture, and relevant medical personnel consider these results for alternative designs of school furniture. It should be kept in mind, however, that school furniture is only one among many factors in the multifactorial field of the back health of school children.

  1. Estudo da massa específica básica e da variação dimensional da madeira de três espécies de eucalipto para a indústria moveleira

    Directory of Open Access Journals (Sweden)

    Camila Santos Doubek Lopes

    2011-01-01

    Full Text Available The utilization of wood from reforested species by the furniture industry is a recent trend. Thus, the present study determined the specific gravity and shrinkage of wood of 18-year-old Eucalyptus grandis, Eucalyptus dunnii and Eucalyptus urophylla, for use as components in solid wood furniture making. The tests to evaluate the specific gravity and shrinkage of wood in the radial and axial variation of the eucalyptus trees were performed according to NBR 7190/96. The results of the analysis of wood from eucalypt species were subjected to the Homogeneity Test, ANOVA, Tukey and Pearson correlation and compared to the performance of sucupira wood (Bowdichia nitida and cumaru wood (Dipteryx odorata, often used in the furniture industry. The following results were found: Eucalyptus grandis had a lower value of shrinkage, being more suitable for furniture components that require high dimensional stability, as well as parts of larger surface. The wood of this species showed a rate of dimensional variation compatible with the native species used in the furniture industry. The radial variation of the wood was also verified, and a high correlation between specific gravity and shrinkage was found. Longitudinally, the base of the trunk of the eucalyptus trees was shown to be the region of greatest dimensional stability.

  2. An emissions audit of a biomass combustor burning treated wood waste

    International Nuclear Information System (INIS)

    Jackson, P.M.; Jones, H.H.; King, P.G.

    1993-01-01

    This report describes the Emissions Audit carried out on a Biomass Combustor burning treated wood waste at the premises of a furniture manufacturer. The Biomass Combustor was tested in two firing modes; continuous fire and modulating fire. Combustion chamber temperatures and gas residence times were not measured. Boiler efficiencies were very good at greater than 75% in both tests. However, analysis of the flue gases indicated that improved efficiencies are possible. The average concentrations of CO (512mgm -3 ) and THC (34mgm -3 ) for Test 1 were high, indicating that combustion was poor. The combustor clearly does not meet the requirements of the Guidance Note for the Combustion of Wood Waste. CO 2 and O 2 concentrations were quite variable showing that combustion conditions were fairly unstable. Improved control of combustion should lead to acceptable emission concentrations. (Author)

  3. Competing Explanations in the Evolution of the Danish Furniture Industry

    DEFF Research Database (Denmark)

    Howells, John

    This article assesses the credibility and relative economic importance of the many real and proposed unique development events in the Post-War evolution of the Danish furniture industry by means of available trade and production time series. It finds first, that the Danish industry experienced its...... only exceptional growth event compared to other developed country furniture industries in the 1950s. It is argued that this establishes as the leading causal candidates for the Danish economic specialisation in furniture; subsidised export marketing of Danish Modern style in the US and the War......-undamaged Danish industry’s opportunistic exploitation of recovering European Post-War furniture markets. Second, the apparent prominence of particle board manufacture in today’s industry is a Danish specialisation with its origin in the 1950s growth event. Third, while there is much evidence that IKEA became...

  4. Fungi in carpeting and furniture dust.

    Science.gov (United States)

    Schober, G

    1991-11-01

    The qualitative and quantitative species composition of fungi in carpets and upholstered furniture dust found in the living-rooms of nine Dutch dwellings was examined in a pilot study. Numbers of spores of xerophilic fungi did not differ in dust removed from carpeting and upholstery. Spores of hydrophilic species were found to be more predominant on floors (P less than 0.05), whereas meso-hygrophilic spores, largely dominated by allergologically relevant Penicillium species, were significantly more abundant in dust taken from regularly used furniture (P less than 0.05). Our results indicate that growth conditions for fungi in the micro-habitats of furniture differ from those in carpeting. No statistically significant differences in number of viable spores have been found in samples taken from ground-floor level compared with those taken from 1st to 3rd floor level of dwellings. From this study, the need for a micro-topographic analysis of the fungal flora in the human environment has become apparent. Efficient allergological home sanitation in dwellings of allergic patients requires detailed data about the colonization of the various micro-habitats by allergenic fungi.

  5. Consumer perceptions of children’s furniture in Shanghai and Shenzhen, China

    OpenAIRE

    Chen, Jiao

    2013-01-01

    China’s high-speed economic growth has accelerated consumers’ disposable income evidently. With the improvement of living standards, people have increasingly been concerned about their life quality, especially when buying consumables like food, toys and clothing as well as durable commodities like furniture for their children. In the past ten years, the Chinese children's furniture market has developed rapidly, making up 9% of total furniture market. However, no studies concerning the analysi...

  6. The Investigation of Soft Furniture Upholstery Deformational Behaviour

    OpenAIRE

    Donata ZUBAUSKIENE; Eugenija STRAZDIENE; Virginijus URBELIS; Virginija SACEVICIENE

    2012-01-01

    Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into accoun...

  7. Furniture Rack Corrosion Coupon Surveillance - 2012 Update

    International Nuclear Information System (INIS)

    Mickalonis, J. I.; Murphy, T. R.; Berry, C. J.

    2012-01-01

    Under the L Basin corrosion surveillance program furniture rack coupons immersed for 14 years (FY2009 coupons) and 16 years (FY2011 coupons) were analyzed and the results trended with coupons exposed for shorter times. In addition, a section harvested from an actual furniture rack that was immersed for 14 years was analyzed for pitting in the weld and heat-affected-zone (HAZ) regions. The L Basin operations maintained very good water quality over the entire immersion period for these samples. These results for FY2009 and FY2011 coupons showed that the average pit depths for the 6061 and 6063 base metal are 1 and 2 mils, respectively, while those for the weld and HAZ are 3 and 4 mils, respectively. The results for the weld and HAZ regions are similar to coupons removed during the period of FY2003 to FY2007. These similarities indicate that the pit development occurred quickly followed by slow kinetics of increase in pit depth. For the actual furniture rack sample average pits of 5 and 2 mils were measured for the HAZ and weld, respectively. These results demonstrate that pitting corrosion of the aluminum furniture racks used to support the spent fuel occurs in waters of good quality. The corrosion kinetics or pit depth growth rate is much less that 1 mil/year, and would not impact long-term use of this material system for fuel storage racks in L Basin if good water quality is maintained

  8. Shellac/nanoparticles dispersions as protective materials for wood

    Science.gov (United States)

    Weththimuni, Maduka L.; Capsoni, Doretta; Malagodi, Marco; Milanese, Chiara; Licchelli, Maurizio

    2016-12-01

    Wood is a natural material that finds numerous and widespread applications, but is subject to different decay processes. Surface coating is the most common method used to protect wood against deterioration and to improve and stabilize its distinctive appearance. Shellac is a natural resin that has been widely used as a protective material for wooden artefacts (e.g. furniture, musical instruments), due to its excellent properties. Nevertheless, diffusion of shellac-based varnishes has significantly declined during the last decades, because of some limitations such as the softness of the coating, photo-degradation, and sensitivity to alcoholic solvents and to pH variations. In the present study, different inorganic nanoparticles were dispersed into dewaxed natural shellac and the resulting materials were investigated even after application on wood specimens in order to assess variations of the coating properties. Analyses performed by a variety of experimental techniques have shown that dispersed nanoparticles do not significantly affect some distinctive and desirable features of the shellac varnish such as chromatic aspect, film-forming ability, water repellence, and adhesion. On the other hand, the obtained results suggested that some weak points of the coating, such as low hardness and poor resistance to UV-induced ageing, can be improved by adding ZrO2 and ZnO nanoparticles, respectively.

  9. Age trends and within-site effects in wood density and radial growth in Quercus faginea mature trees

    Directory of Open Access Journals (Sweden)

    Vicelina B. Sousa

    2016-04-01

    Full Text Available Aim of the study: This paper aims to valorize the wood of Quercus faginea Lam. for high quality end uses (e.g. furniture by studying growth and quality properties using mature trees. Age trends in tree-ring width and wood density are shown and the main factors responsible for variations in tree-ring width and wood density within and between trees are investigated. Area of study: The study site is in the center of Portugal within the natural species distribution area.Material and methods: Radial samples from ten mature trees were collected at 6 heights (from base to 9.7 m and prepared for X-ray microdensity.Main results: Wood density showed high values, ranging from 0.868 g/cm3 to 0.957 g/cm3. Wood density decreased from pith to bark and with stem height. Cambial age showed a linear relationship with wood density and most of the variation in wood is explained by age. Intra-ring and axial within-tree homogeneity was good.Research highlights: Mature trees of Q. faginea showed high wood density and a high potential for high quality end uses, comparable to other oaks. Wood density is influenced by cambial age and tree-ring width. Wood quality may be improved by tree growth rates adjustment e.g. through an adequate tree stand density (e.g. thinning operations. 

  10. Age trends and within-site effects in wood density and radial growth in Quercus faginea mature trees

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, V.B.; Louzada, J.L.; Pereira, H.

    2016-07-01

    Aim of study: This paper aims to valorize the wood of Quercus faginea Lam. for high quality end uses (e.g. furniture) by studying growth and quality properties using mature trees. Age trends in tree-ring width and wood density are shown and the main factors responsible for variations in tree-ring width and wood density within and between trees are investigated. Area of study: The study site is in the center of Portugal within the natural species distribution area. Material and methods: Radial samples from ten mature trees were collected at 6 heights (from base to 9.7 m) and prepared for X-ray microdensity. Main results: Wood density showed high values, ranging from 0.868 g/cm3 to 0.957 g/cm3. Wood density decreased from pith to bark and with stem height. Cambial age showed a linear relationship with wood density and most of the variation in wood is explained by age. Intra-ring and axial within-tree homogeneity was good. Research highlights: Mature trees of Q. faginea showed high wood density and a high potential for high quality end uses, comparable to other oaks. Wood density is influenced by cambial age and tree-ring width. Wood quality may be improved by tree growth rates adjustment e.g. through an adequate tree stand density (e.g. thinning operations). (Author)

  11. Age trends and within-site effects in wood density and radial growth in Quercus faginea mature trees

    International Nuclear Information System (INIS)

    Sousa, V.B.; Louzada, J.L.; Pereira, H.

    2016-01-01

    Aim of study: This paper aims to valorize the wood of Quercus faginea Lam. for high quality end uses (e.g. furniture) by studying growth and quality properties using mature trees. Age trends in tree-ring width and wood density are shown and the main factors responsible for variations in tree-ring width and wood density within and between trees are investigated. Area of study: The study site is in the center of Portugal within the natural species distribution area. Material and methods: Radial samples from ten mature trees were collected at 6 heights (from base to 9.7 m) and prepared for X-ray microdensity. Main results: Wood density showed high values, ranging from 0.868 g/cm3 to 0.957 g/cm3. Wood density decreased from pith to bark and with stem height. Cambial age showed a linear relationship with wood density and most of the variation in wood is explained by age. Intra-ring and axial within-tree homogeneity was good. Research highlights: Mature trees of Q. faginea showed high wood density and a high potential for high quality end uses, comparable to other oaks. Wood density is influenced by cambial age and tree-ring width. Wood quality may be improved by tree growth rates adjustment e.g. through an adequate tree stand density (e.g. thinning operations). (Author)

  12. Anthropometric measurements for ergonomic design of students’ furniture in India

    Directory of Open Access Journals (Sweden)

    Ismail Wilson Taifa

    2017-02-01

    Full Text Available This paper presents anthropometric measurements regarding engineering students in India. Health survey (ergonomic assessment was carried out to know the health status of all students who have been using poorly designed furniture. The data were measured with the help of various tools. After data collection and analysis, authors came up with exhaustive dimensions for designing adjustable classrooms furniture. Dimensions recommended include; bench surface height, bench depth and width, back rest width and height, backrest angle, desk height, desk depth, width, and desk angle. Therefore, an implementation of these data will help to create comfortability, safety, well-being, suitability, reduce Musculoskeletal disorders, and improve performance of students in terms of attentiveness. Also, it is highly recommended to consider requirements from students in designing classrooms furniture and conduct seminar or workshop to educate students regarding the negative impact towards adapting poor posture in the long usage of classrooms furniture.

  13. Regional prices in the Swedish wood-fuel market

    International Nuclear Information System (INIS)

    Hillring, Bengt

    1999-01-01

    This paper analyses, through a statistical survey, the regional distribution of prices on the commercial wood-fuel market for district heating plants and the pellets market for single family houses. The existing market watch of the national Swedish wood-fuel market has been developed for both refined and unrefined wood-fuels. The last five years the trend for wood-fuel prices on the district heating market has been stable, with a slight increase in the price of refined wood-fuels. However, on the young and fast-growing household market for pellets, prices have increased 12% during the last three years. The distribution of prices for northern, middle and southern Sweden indicates differences within 5% between the regions. The limited price difference between Swedish regions are a product of a large domestic supply and an increasing trade among regions in Europe, putting pressure on prices. Regional differences, mirrored as transportation distances and local production costs are key factors that could explain this regional price variation. However, the development of a commercial market with less regulation tends to level out prices. Consumers on the household market purchase small quantities and do not have the same possibility as district heating companies to take advantage of the oversupply opportunity and thus face a faster price development. The weaker market position of the consumers also tends to give homogeneous prices between regions of the residential sector. (Author)

  14. Wood burning stoves and small boilers - particle emissions and reduction initiatives; Braendeovne og smae kedler - partikelemissioner og reduktionstiltag

    Energy Technology Data Exchange (ETDEWEB)

    Illerup, J B; Capral Henriksen, T; Lundhede, T [Danmarks Miljoeundersoegelser, Aarhus Universitet, Aarhus (Denmark); Breugel, C van; Zoellner Jensen, N [Miljoestyrelsen, Copenhagen (Denmark)

    2007-06-15

    Pollution from burning wood in private households, and the environmental and health consequences of this is determined in practice by a complicated interaction between a number of factors, including firing habits, fuel, type of stove/boiler, chimney and location of the chimney in relation to the surroundings. This report maps out the technologies used today for burning wood in private households, how these technologies contribute to particle emissions and which technologies may potentially reduce emissions of particles from burning wood in households in Denmark. Moreover, the possible emissions reductions and the financial costs incurred by consumers from different initiatives have been estimated. This report does not deal with possible initiatives for improvement of firing habits, fuel quality and chimneys. (au)

  15. Contributions to the deployment of furniture in pole central region Tocantins

    Directory of Open Access Journals (Sweden)

    Jorge D’ Ambros

    2012-09-01

    Full Text Available This study was developed in the central region of Tocantins, for the identification and analysis of positive factors, weaknesses, opportunities and threats associated with the furniture supply chain in order to continue the formation of the regional furniture pole. To achieve this objective the methodology used was to listen to local actors and experts in the furniture segment. Seventy-five local actors among industry officials, academic institutions and university representatives were interviewed. They pointed out and analyzed the main points related to the economic, social, political and environmental contributions stemming from the creation of a pole in the region. The tool used was the SWOT Analysis associated with the Method of Judges, and then the variables were subjected to Principal Component Analysis - PCA. The SWOT Matrix proved to be adequate and effective to be used as diagnostic tool along with local actors. The examination of all the factors associated with local furniture production chain helped to understand the activity and indicate actions that affect this arrangement and that will bring economic, social and environmental benefits. According to the experts, the establishment of a furniture industry in the region will favor the employment and income creation, local and regional sustainable development, improvements in business management, raise the standard of quality and productivity of the local furniture industry and improve the quality of population standard of living.

  16. Analisis Strategi Pemasaran Usaha Jasa Bersama Furniture Jalan Setia Budi Medan

    OpenAIRE

    Silitonga, Natasya Meylani

    2014-01-01

    A thesis is called “Analysis of the strategy marketing Usaha Jasa Bersama Furniture.” Thebackground of this research is the development of business furniture currently, fueled by rising consumption needs as well as the from the community. And this is heightened by the increasing number of housing are constructed, so that is an opportunity that is very large in proportion to the business of furniture.With the increasing number of competitors, then many consumers, to be able to draw an underta...

  17. Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

    Directory of Open Access Journals (Sweden)

    Aries Wicaksono

    2014-11-01

    Full Text Available Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS. PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it is important for information systems running properly.This research aimed to audit the general control and applications control on the expenditure cycle accounting information system at PT. Lagio Furniture. This type of audit is audit around the computer. And then also collecting data through observation and interviews with relevant parties. Results of thereserarch is the expenditure cycle accounting information system at PT. Lagio Furniture was good. But there is still need to be improved in the control plan security, operational management control, and control inputs.

  18. Intensity of rivalry in Czech furniture production industry

    OpenAIRE

    Lucie Špačková; Pavel Žufan

    2012-01-01

    The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local) demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of ...

  19. ORC technology for waste-wood to energy conversion in the furniture manufacturing industry

    Directory of Open Access Journals (Sweden)

    Moro Riccardo

    2008-01-01

    Full Text Available Exploitation of low and medium temperature thermal sources, in particular those based on biomass combustion and on industrial residual heat recovery, has been increasingly investigated in the last decades, accordingly to the growing interest towards reduction in primary energy consumption and environmental issues. Organic Rankine cycle technology allows designing power plants that are less demanding in terms of auxiliaries, safety systems, maintenance and operating costs when compared to conventional water steam power plants. To support the preliminary technical and economic design of this kind of plants in different contexts, a simulation code of part load and off-design operation of an organic Rankine cycle unit for combined heat and power has been developed. In the paper, taking the real situation of a furniture manufacturing factory as a starting point, it is shown how all energy flows occurring all year long inside the combined heat and power plant, can be estimated on the basis of the thermal user duty time profile, the available biomass flow rate and the adopted operation strategy. This information is the basis in order to correctly evaluate the energetic, economic and environmental advantages of the proposed technical solution, with respect to a particular context, as it is shown in the concluding part of the paper.

  20. PENGARUH UMUR POHON, BONITA DAN POSISI AKSIAL BATANG TERHADAP STRUKTUR MAKROSKOPIS DAN KUALITAS KAYU JATI SEBAGAI BAHAN FURNITUR (Effect of Tree Age, Site Quality Index and Trunk Axial Position on Macroscopic Structure and Quality of Teak Wood

    Directory of Open Access Journals (Sweden)

    Yustinus Suranto

    2015-03-01

    is an alternative solution of limited raw materials faced by furniture industry. Young wood tends to have a low-quality wood. One element for measuring wood quality is wood macroscopic structure properties. This study was aimed to determine the effect of tree age, site quality index and axial stem position on wood structures and wood quality. Thirty-six young teak trees were harvested on forest areas of Kendal Forest District, Central Java Province. Three disks were taken from each trunk, namely from the butt, middle and upper parts. Heartwood proportion and annual ring dimensions were measured based on natural color difference by using millimeter grid apparatus. Data were analyzed by using variance analysis arranged in blocked factorial and further testing were performed by using HSD Duncan. Wood quality was analyzed using determinant method which elaborated based on Z norm curve. Results showed that interaction of three factors did not affect on heart-wood proportion and growth ring dimensions. Interaction of age classes and site quality index influence significantly on heart-wood proportion and growth ring dimensions. Stem axial position significantly affects on heart-wood proportion and very significantly effect on growth ring dimensions. The lower wood position, the higher heart-wood proportion and the wider growth ring dimensions. Interaction of three factors namely class age V, site quality index 4 and middle trunk position has a highest wood quality, namely class 2, but interaction of age class V, site quality index 3 and top trunk has the lowest one, namely class 4. The use of wood-based quality will maximize the value and increase the product lifespan, thereby reducing the intensity of logging and become more environmental friendly.

  1. Impacts of two improved wood-burning stoves on the indoor air quality

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo; Jensen, Ole Michael; Tarelho, Luis A. C.

    2014-01-01

    Large amounts of forest wood is still being used in rural housing in low and mid-income countries in South America - 36% in Peru and 6% in Brazil - generating hazardous wood smoke. Interviews were conducted to the users of improved stoves in 20 rural households. In Peru, the field study was carri...

  2. The Business of: School Furniture: Innovative Designs for Tomorrow's Learning

    Science.gov (United States)

    Lacey, Kylie

    2013-01-01

    As instruction shifts to a learner-centric, individualized approach with a focus on small group activities, heavy furniture that small hands cannot move on their own have become less desirable. The most popular pieces are lightweight, portable, and colorful. The Smith System furniture company encourages schools to select chairs and desks in their…

  3. Intensity of rivalry in Czech furniture production industry

    Directory of Open Access Journals (Sweden)

    Lucie Špačková

    2012-01-01

    Full Text Available The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of rivalry represent particular influences defined by Porter in his model of five competitive forces. Main influences identified by Porter, which are increasing the intensity of competition in the furniture production industry in the Czech Republic include low industry concentration, relatively low diversity of competitors, decline in sales, low (or none switching costs, and existing excessive capacity within the industry. Further development will be most significantly influenced by a growing concentration of the bigger Czech producers on domestic market and overall economic development.

  4. The Influence of Furniture on Air Velocity in a Room:an isothermal case

    OpenAIRE

    Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

    1998-01-01

    Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room.Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set-up is simulated with one of the inlets where a volume resistance represents the furniture.

  5. Revised CDM baseline study on fuel use and manure management at household level

    Energy Technology Data Exchange (ETDEWEB)

    Buysman, E.; Bryan, S.; Pino, M.

    2010-05-15

    This report presents the revised study of the original CDM baseline study conducted in 2006. The original study was conducted under the authority of the National Biogas Program (NBP), to study the potential GHG mitigation resulting from the adoption of domestic biodigesters. In the beginning of June 2006, a survey amongst 300 randomly selected households with the technical potential for a biodigester was conducted in the NBP's 6-targeted provinces (Kampong Cham, Svay Rieng, Prey Veng, Kampong Speu, Takeo and Kandal) in southeast Cambodia. The revised baseline study includes two additional provinces, Kampot and Kampong Chhnang. The survey showed that a significant proportion of the households have no access to basic sanitation and often have health problems. They consume mainly wood as cooking fuel and the majority use inefficient cooking stoves. The main lighting fuel is kerosene. The GHG emissions were calculated for each type of Animal Waste Management System (AWMS) and the baseline fuel consumption. The main methodology used is the GS-VER biodigester methodology and the IPCC 2006 guidelines to ex-ante estimate baseline, project and the emission reductions. The GHG emission from wood burning is only considered when it originates from a non-renewable source. The NRB analysis determined a NRB share of 70.7% for both collected and purchased wood. Total GHG emission is calculated by combining AWMS and wood fuels emissions. The annual baseline and project emission was estimated to be respectively 5.38 tCO2eq and 0.46 tCO2eq per average household, the emission reductions (ER) are therefore 4.92 tCO2eq/household/year.

  6. STRATEGI PENINGKATAN DAYA SAING INDUSTRI FURNITURE ROTAN INDONESIA DI KAWASAN ASEAN DAN TIONGKOK

    Directory of Open Access Journals (Sweden)

    Rudi Eko Setyawan

    2016-11-01

    Full Text Available Competitiveness of a country’s export commodities is one of the indicators used to measure its economic progress. This study aims to analyze the competitiveness of Indonesian rattan furniture in China and the ASEAN region, along with the influencing factors and to conclude appropriate strategies to improve its competitiveness. The analysis was conducted by utilizing Diamond's Porter, Normalized Revealed Comparative Advantage (NRCA, and panel data regression. The results showed that the competitiveness of Indonesian rattan furniture in the ASEAN region and China, in the period of 2001 to 2014, is fluctuated with small level of competitiveness. This notion can be seen from all of the positive NRCA index values. In the Fixed Effects Model (FEM, the independent variables that significantly influence NRCA include the export prices and volumes, global prices of rattan furniture and raw rattan, the number of rattan industries, production of real rattan, production value of rattan, investment of rattan industry, direct labor of rattan industry, interest rate of Bank loans, implementation of ACFTA and violation policy of raw and semi-finished rattan exports. To increase the competitiveness of Indonesian rattan furniture, the government is urged to establish a development or training center for the innovative designs and improvement of quality standard of Indonesian rattan furniture. This is also supported by a guarantee of rattan raw material availability and technological improvement of rattan processing industry. Thus, the third step to perform is the improvement of infrastructure and distribution chain, improvement of market information systems, and strengthening of brand image of rattan furniture in Indonesia.Keywords:  competitiveness of rattan furniture, diamond's porter, normalized revealed comparative advantage, fixed effect model ABSTRAKDaya saing komoditas ekspor negara merupakan salah satu indikator yang digunakan untuk mengukur kemajuan

  7. Revision of EU Ecolabel and EU Green Public Procurement criteria for furniture products: Preliminary Report

    OpenAIRE

    DONATELLO SHANE; MOONS HANS; CORDELLA MAURO; KOWALSKA MALGORZATA AGATA; KAPS RENATA BARBARA; WOLF Oliver; HIDALGO Carme; FUENTES Natalia

    2014-01-01

    The EU is responsible for around 20% of global furniture production and the many "ecolabel schemes" of potential relevance to furniture products have been briefly reviewed. Screening of 109 publications relating to the life cycle impacts of furniture products revealed several general trends, namely that material production and processing where the dominant sources of environmental impacts associated with furniture products. A comprehensive review of the use of hazardous substances and mixture...

  8. The green marketing of modern office furniture

    Institute of Scientific and Technical Information of China (English)

    林凡青

    2015-01-01

    Green marketing is referred to as the mainstream of marketing in the 21st century, it mainly discusses the enterprise how to deal with the growing consumer demand for environmentally friendly products. Green marketing is an extension of the traditional marketing and the development, in the traditional marketing concept, through the coordination of enterprises, customers, competitors to gain maximum profits, and green marketing is more than the ecological environment factors included. Furniture enterprises through to carry out green marketing strategy, sales of green furniture products, the corresponding measures to guide the sustainable consumption and satisfy the consumer, to achieve economic interests, the interests of the consumers, the environment is unified.

  9. Effects of household dynamics on resource consumption and biodiversity.

    Science.gov (United States)

    Liu, Jianguo; Daily, Gretchen C; Ehrlich, Paul R; Luck, Gary W

    2003-01-30

    Human population size and growth rate are often considered important drivers of biodiversity loss, whereas household dynamics are usually neglected. Aggregate demographic statistics may mask substantial changes in the size and number of households, and their effects on biodiversity. Household dynamics influence per capita consumption and thus biodiversity through, for example, consumption of wood for fuel, habitat alteration for home building and associated activities, and greenhouse gas emissions. Here we report that growth in household numbers globally, and particularly in countries with biodiversity hotspots (areas rich in endemic species and threatened by human activities), was more rapid than aggregate population growth between 1985 and 2000. Even when population size declined, the number of households increased substantially. Had the average household size (that is, the number of occupants) remained static, there would have been 155 million fewer households in hotspot countries in 2000. Reduction in average household size alone will add a projected 233 million additional households to hotspot countries during the period 2000-15. Rapid increase in household numbers, often manifested as urban sprawl, and resultant higher per capita resource consumption in smaller households pose serious challenges to biodiversity conservation.

  10. Quality of the surface of Coffea arabica wood

    Directory of Open Access Journals (Sweden)

    Pedro Paulo de Carvalho Braga

    2014-03-01

    Full Text Available The wood of Coffea arabica L. is considered a a residue of the coffee industry and is widely used as a source of energy. Few studies have shown other destinations such as the manufacture of small objects and furniture with rustic design. The objective of this work was to find the best fit in cutting speed during machining planer trowel the wood of Coffea arabica, taking into consideration the quality of the machined surface. The wood from the Coffea arabica came from an 15 years planting, spacing 3 x 2 m, of the municipality of Machado / MG. The tree was pruned, unfolded and flattened, in order for getting cut-proof of 30 mm thick, with variables length and width. The machining tests were performed at the Laboratory of Wood Machining (DCF / UFLA, varying the cutting speed in plane trowel. The qualification of the machined surface was performed by the feed per tooth (fz, visual analysis (ASTM D 1666-87 and roughness Ra and Rz. It was used a completely randomized design with 30 repetitions. We conducted the analysis of variance test and the average of Scott-Knott, at 5% significance level. It was calculated the percentage of marks obtained for the feed per tooth. The results showed that the quality of machined surface with cutting speeds of 19 and 21 m∙s-1 and forward speed of 6 m∙min-1 were satisfactory with small surveys of fiber and low values of feed per tooth ( fz and roughness Ra and Rz.

  11. Inventory of usage pattern for wood burning appliances

    International Nuclear Information System (INIS)

    Cooper, David; Joeborn, Inger; Sjoedin, Aake; Munkhammar, Inger; Gustavsson, Lennart

    2005-02-01

    The Swedish Environmental Research Institute (IVL) in co-operation with the Swedish National Testing and Research Institute (SP) and Statistics Sweden (SCB) have investigated the use of domestic wood burning for wood stoves and open fireplaces. The results from a closer examination of existing national energy statistics for residential heating has enabled a division of the average consumption of firewood for each house by the category 'fireplace for open fire' and 'tiled stove/heating stove/fireplace for wood'. The estimation of emissions can therefore be improved by differentiating emission factors for different wood stoves and open fireplaces. Today, only one emission factor is used. An insight into general firing procedures, wood storage routines etc. was investigated using a questionnaire for the Teleborg area of the city Vaexjoe. The results of this study provide a foundation for further work, which will subsequently enable improvements for emission inventories on small-scale biomass combustion from household appliances

  12. The use of urban wood waste as an energy resource

    Science.gov (United States)

    Khudyakova, G. I.; Danilova, D. A.; Khasanov, R. R.

    2017-06-01

    The capabilities use of wood waste in the Ekaterinburg city, generated during the felling of trees and sanitation in the care of green plantations in the streets, parks, squares, forest parks was investigated in this study. In the cities at the moment, all the wood, that is removed from city streets turns into waste completely. Wood waste is brought to the landfill of solid household waste, and moreover sorting and evaluation of the quantitative composition of wood waste is not carried out. Several technical solutions that are used in different countries have been proposed for the energy use of wood waste: heat and electrical energy generation, liquid and solid biofuel production. An estimation of the energy potential of the city wood waste was made, for total and for produced heat and electrical energy based on modern engineering developments. According to our estimates total energy potential of wood waste in the city measure up more 340 thousand GJ per year.

  13. Carbon monoxide exposure in households in Ciudad Juárez, México.

    Science.gov (United States)

    Montoya, Teresa; Gurian, Patrick L; Velázquez-Angulo, Gilberto; Corella-Barud, Verónica; Rojo, Analila; Graham, Jay P

    2008-03-01

    This study assessed exposure to carbon monoxide from gas and wood heater emissions in a sample of 64 households in peri-urban residential areas in Ciudad Juárez, Chihuahua, México. Indoor and outdoor carbon monoxide concentrations and temperatures were monitored for a continuous period of 1 week at 1 and 6-min intervals, respectively. The moving average carbon monoxide concentrations were compared to the World Health Organization (WHO) standards for carbon monoxide. Sixty-seven percent of households with gas heaters and 60% of households with wood heaters exceeded a health-based standard at some point during the monitoring. The difference between indoor and outdoor temperatures was modestly correlated with average carbon monoxide exposure (r=0.35, p-value h standard of 9ppm (odds ratio=5.1, p-value=0.031). These results highlight the need for further efforts to identify and mitigate potentially hazardous carbon monoxide exposures, particularly in moderate-income countries with cooler climates.

  14. Design of indoor furniture with acoustic insulation and noise reduction function

    Science.gov (United States)

    Chen, Ziqiang; Lyu, Jianhua; Chen, Ming

    2018-05-01

    In this article, the current status of noise pollution research is analyzed and indoor noise pollution hazard on human body is discussed taking noise pollution as entry point to better understand people's needs in this concern, and it comes to the conclusion that indoor furniture with noise insulation function is required; In addition, the design status and necessity of indoor furniture with noise insulation function are expounded and the material property, structure design essentials and form design are analyzed according to sound transmission principles. In the end, design case study is presented to provide an effective way for design of indoor furniture with acoustic insulation function that meets people's needs.

  15. Classroom Furniture: The Mod Squad

    Science.gov (United States)

    Raths, David

    2012-01-01

    This is the first article in a six-part series on the elements of a collaborative classroom: furniture, social media, video/web conferencing tools, collaborative software, interactive devices, and mobile devices. With most universities facing tight budgets, convincing administrators to invest in expensive new classrooms is a challenge. Many higher…

  16. RFID- TEKNIIKAN MAHDOLLISTAMAT TYÖAIKASÄÄSTÖT HUONEKALUTEOLLISUUDESSA : - CASE INCAP FURNITURE OY

    OpenAIRE

    Taskinen, Jarkko

    2009-01-01

    Opinnäytetyön tarkoituksena oli selvittää RFID- tekniikan eli radiotaajuudella toimivan etätunnistamisen mahdollistamia työaikasäästöjä huonekaluteollisuudessa. Toimeksiantaja oli Incap Furniture Oy. Incap Furniture Oy on yksi suurimmista mäntyhuonekalusopimusvalmistajista maailmassa. Pääasiakas on Ikea. Incap Furniture Oy on aloittanut projektin, jonka tarkoitus on tutkia RFID- tekniikan mahdollisuuksia ja hyötyjä tehtaiden toiminnassa. Opinnäytetyö oli osa projektia. Opinnäyt...

  17. Characterization of household waste in Greenland

    International Nuclear Information System (INIS)

    Eisted, Rasmus; Christensen, Thomas H.

    2011-01-01

    The composition of household waste in Greenland was investigated for the first time. About 2 tonnes of household waste was sampled as every 7th bag collected during 1 week along the scheduled collection routes in Sisimiut, the second largest town in Greenland with about 5400 inhabitants. The collection bags were sorted manually into 10 material fractions. The household waste composition consisted primarily of biowaste (43%) and the combustible fraction (30%), including anything combustible that did not belong to other clean fractions as paper, cardboard and plastic. Paper (8%) (dominated by magazine type paper) and glass (7%) were other important material fractions of the household waste. The remaining approximately 10% constituted of steel (1.5%), aluminum (0.5%), plastic (2.4%), wood (1.0%), non-combustible waste (1.8%) and household hazardous waste (1.2%). The high content of biowaste and the low content of paper make Greenlandic waste much different from Danish household waste. The moisture content, calorific value and chemical composition (55 elements, of which 22 were below detection limits) were determined for each material fraction. These characteristics were similar to what has been found for material fractions in Danish household waste. The chemical composition and the calorific value of the plastic fraction revealed that this fraction was not clean but contained a lot of biowaste. The established waste composition is useful in assessing alternative waste management schemes for household waste in Greenland.

  18. BROMINATION OF 4-VINYLCYCLOHEXANE AND APPLYING THE RESULTING PRODUCT TO IMPROVE THE FLAME RETARDANT PROPERTIES OF WOOD

    Directory of Open Access Journals (Sweden)

    N. S. Nikulina

    2014-01-01

    Full Text Available Currently, the demand for timber is increasing. Wood and products on its basis are considered to be the most popular in the construction industry, furniture industry, as building materials and other However, along with the positive features of this material there are also negative factors, which include low resistance to biological degradation, high temperature, resistance. Wood and materials based on it are the most flammable, and fire safety is characterized by the velocity of propagation of fire on the wooden structure. He is able to destroy it in a matter of minutes. So the wooden house elements must be protected from fire. It was therefore necessary for the fire protection of wood. It is in the handling of wood with flame retardants. Basic fire fighting methods is the impregnation of wood antipyrene composition, painting fire paint and constructive ways - insulation of timber, non-combustible compositions which can resist the fire. In the work of brominated 4-vinylcyclohexane formed as a by-product in the petrochemical industry, in chloroform synthesized compound with bromine 62-64 % and the possibility of using this product to get antiferromag composition. It is established that the application for the protective treatment of wood synthesized flame retardant has shown that this product can be used for the protective treatment of natural wood to make it flame retardant properties. Use as antiperiodic compositions bromodomain based products 4-vinylcyclohexane allows to obtain images of wood first group of flame retardant efficiency.

  19. DESAIN DAN IMPLEMENTASI AUGMENTED REALITY BERBASIS WEB PADA APLIKASI FURNITURE SHOPPING MANAGER SEBAGAI ALAT BANTU BELANJA ONLINE

    Directory of Open Access Journals (Sweden)

    Basworo Ardi Pramono

    2012-07-01

    Full Text Available Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya.  FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online.   Aplikasi FSM dikembangkan dengan mengimplementasikan beberapa komponen  teknologi utama yaitu Augmented Reality (AR, engine 3D ke dalam aplikasi.  Keseluruhan komponen tersebut dirancang agar dapat  menghadirkan suasana belanja yang menarik di hadapan user secara digital. Dengan demikian user dapat mencoba apakah furniture yang di beli cocok dengan ruangan. Dengan menggunakan FSM, user dapat mencoba model 3D furniture, memilih model furniture hingga mengambil foto ruangannya dengan hasil visualisasi model furniture 3D yang disukai untuk selanjutnya dapat disimpan.

  20. Factors related to furniture anchoring: a method for reducing harm during earthquakes.

    Science.gov (United States)

    Haraoka, Tomoko; Hayasaka, Shinya; Murata, Chiyoe; Yamaoka, Taiji; Ojima, Toshiyuki

    2013-02-01

    Fatalities and injuries during an earthquake can be reduced by taking preemptive measures before-hand, and furniture anchoring is an important safety measure for all residents. This study sought to clarify the factors associated with furniture anchoring within the home. A self-administered mail survey was completed from July to August 2010 by 3500 men and women between the ages of 20 and 69 years who were chosen at random from an official government resident registry of 2 cities in Japan. Of the 1729 valid responses, 37.1% reported furniture anchoring. An association with furniture anchoring was observed for having viewed earthquake intensity maps or damage predictions (odds ratio [OR] 1.92, 95% C1 1.54-2.39), expressing concern about a future earthquake (OR 2.07, 95% C1 1.36-3.15), feelings of urgency (OR 1.90, 95% CI 1.47-2.45), accuracy of the government disaster preparedness information (OR 1.68, 95% CI 1.17-2.42), knowledge of the meaning of emergency earthquake warnings (OR 1.67, 95% CI 1.12-2.48), and participation in voluntary disaster preparedness activities (OR 1.40, 95% C1 1.12-1.75). Furniture anchoring was found to be associated with risk awareness, risk perception, disaster preparedness information provided by government to residents, knowledge of earthquakes, participation in voluntary disaster preparedness activities, nonwooden structures, and marital status. An increase in furniture anchoring is important and can be achieved through education and training in daily life.

  1. Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

    OpenAIRE

    Wicaksono, Aries

    2014-01-01

    Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS). PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it...

  2. Impact of Furniture Layout on Indoor Daylighting Performance in Existing Residential Buildings in Malaysia

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Mousavi

    2018-06-01

    Full Text Available Currently, home-based computing workspaces have developed substantially all over the world, especially in Malaysia. This growing trend attracts computer workers to run a business from their residential units. Hence, visual comfort needs to be considered in addition to thermal comfort for home workers in their residential working rooms. While such rooms are always occupied with furniture, the layout of the furniture may influence the indoor daylighting distribution. Several various furniture layouts can be arranged in a residential working room. However, to have better generalisation, this study focused on the impacts of mostly-used-furniture-layouts (MUFLs on indoor daylighting performance in residential working rooms. The field measurement was conducted in a typically furnished room under a tropical sky to validate the results of the simulation software under different sky conditions. Then, daylight ratio (DR, as a quantitative daylighting variable, and the illuminance uniformity ratio (IUR, CIE glare index (CGI, and Guth visual comfort probability (GVCP, as qualitative daylighting variables, were analysed through simulation experiments. In conclusion, by changing the furniture layout, daylight uniformity recorded the highest fluctuations in the case room among all variables. While various furniture layouts, in a residential working room in the tropics, may even slightly reduce the extreme indoor daylight quantity, they can worsen the indoor daylight quality compared to an unfurnished space. The paper shows that furniture as an interior design parameter cannot help to improve tropical daylighting performance in a building.

  3. Value Criteria for School Furniture

    Science.gov (United States)

    Spellman, Walter

    2012-01-01

    Making furniture decisions can involve many factors, and they vary from institution to institution. For fixtures, furnishings and equipment, comparing initial cost with the cost of ownership over a life cycle can be more challenging. It may be the functionality of the furnishings that provides the greatest return on investment. In this article,…

  4. Determination of effective criteria on development of RTA Furniture Industry in Iran

    Directory of Open Access Journals (Sweden)

    hosein omidi

    2016-06-01

    Full Text Available Ready to assemble furniture industry in Iran has not been considered by practitioners and investors as it is known in the other countries. While, it is possible to achive the many competitive advantage, if this industry develop in Iran. With regard to this issue, the goal of this study is to introduce the potential market for ready to assemble furniture and determination and prioritize of the effective criteria on development of Iran ready to assemble furniture industry. For this purpose, after preliminary investigation and interview with some of the furniture producers and relevant experts, the identified criteria were divided into five major groups as Economic, Management, Marketing & Sales, Technical-Technological and Infrastructure and as well as 42 sub-criteria. The hierarchy of these criteria was designed and then the weighting values of criteria and sub-criteria were determined using Analytical Hierarchy Process (AHP by expert choice software. The results indicated that the management and marketing & sales criteria have the highest weighting values at the first level. In addition, among the effective sub-criteria, the criteria as marketing innovation, design innovation, operations management, logistics management, raw materials innovation and product promotion, have the highest priorities for development of ready to assemble furniture industry in Iran.

  5. The Household Cooking Sector in Nigeria: Environmental and Economic Sustainability Assessment

    OpenAIRE

    Gujba, Haruna; Mulugetta, Yacob; Azapagic, Adisa

    2015-01-01

    This paper studies life cycle environmental impacts and costs of the household cooking sector in Nigeria from 2003 to 2030. Five scenarios are considered: business as usual, dominated by fuel wood stoves; low penetration of improved fuel wood and solar stoves, as planned by the government; high penetration of these stoves; increased use of fossil fuel stoves; and increased use of electric stoves. If business as usual (BAU) continues, the environmental impacts would increase by up to four time...

  6. Emergency department visits of young children and long-term exposure to neighbourhood smoke from household heating - The Growing Up in New Zealand child cohort study.

    Science.gov (United States)

    Lai, Hak Kan; Berry, Sarah D; Verbiest, Marjolein E A; Tricker, Peter J; Atatoa Carr, Polly E; Morton, Susan M B; Grant, Cameron C

    2017-12-01

    In developed countries, exposure to wood or coal smoke occurs predominantly from neighbourhood emissions arising from household heating. The effect of this exposure on child health is not well characterized. Within a birth cohort study in New Zealand we assessed healthcare events associated with exposure to neighbourhood smoke from household heating. Our outcome measure was non-accidental presentations to hospital emergency departments (ED) before age three years. We matched small area-level census information with the geocoded home locations to measure the density of household heating with wood or coal in the neighbourhood and applied a time-weighted average exposure method to account for residential mobility. We then used hierarchical multiple logistic regression to assess the independence of associations of this exposure with ED presentations adjusted for gender, ethnicity, birth weight, breastfeeding, immunizations, number of co-habiting smokers, wood or coal heating at home, bedroom mold, household- and area-level deprivation and rurality. The adjusted odds ratio of having a non-accidental ED visit was 1.07 [95%CI: 1.03-1.12] per wood or coal heating household per hectare. We found a linear dose-response relationship (p-value for trend = 0.024) between the quartiles of exposure (1st as reference) and the same outcome (odds ratio in 2nd to 4th quartiles: 1.14 [0.95-1.37], 1.28 [1.06-1.54], 1.32 [1.09-1.60]). Exposure to neighbourhoods with higher density of wood or coal smoke-producing households is associated with an increased odds of ED visits during early childhood. Policies that reduce smoke pollution from domestic heating by as little as one household per hectare using solid fuel burners could improve child health. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. 75 FR 20838 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Science.gov (United States)

    2010-04-21

    ... Collection Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Wood Furniture... electronic docket, go to http://www.regulations.gov . Title: NESHAP for Wood Furniture Manufacturing..., install, and utilize technology and systems for the purposes of collecting, validating, and verifying...

  8. The Influence of Office Furniture on the Air Movement in a Mixing Ventilated Room

    DEFF Research Database (Denmark)

    Nielsen, June Richther

    Isothermal and thermal experiments and simulations form the basis of the investigations in this thesis. It is mainly the isothermal case that is studied. The examinations concern how normal office furniture influences the air movements in a mixing ventilated room. Especially, the jet under...... whereas the two last-mentioned inlets are simulated 3-dimensional. In the isothermal simulations a furniture volume is used to represent the physical furniture and in the thermal case a furniture volume together with a volume source is used. The investigations of the isothermal experiments and simulations...... by the thermal forces in the room. The thermal case needs more investigation because only two experiments and the corresponding simulations are the base of the investigations....

  9. 75 FR 54854 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2010-09-09

    ... Hospitality Product Mfg., Co., Ltd. Shanghai Kent Furniture Co., Ltd. Shanghai Season Industry & Commerce Co... International, Ltd., Super Art Furniture Co., Ltd., Artwork Metal and Plastic Co., Ltd., Jibson Industries, Ltd... Hospitality, Inc. Changshu HTC Import & Export Co., Ltd. Chuan Fa Furniture Factory Contact Co., Ltd. Decca...

  10. Retouching without Touching : Creating the illusion of recoloured furniture through light projection

    NARCIS (Netherlands)

    van Adrichem, F.; van Bommel, M.; Vasques Dias, M.

    2017-01-01

    In this article an alternative method for recolouring discoloured furniture is presented. The focus is on two discoloured pieces of furniture: an Amsterdam School buffet and a Rococo marquetry commode that both have lost their bright colours due to fading (figures 1, 2). The buffet was dyed with a

  11. 41 CFR 101-25.104 - Acquisition of office furniture and office machines.

    Science.gov (United States)

    2010-07-01

    ... furniture and office machines. 101-25.104 Section 101-25.104 Public Contracts and Property Management... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.104 Acquisition of office furniture and office machines... machines. The acquisition of new items shall be limited to those requirements which are considered...

  12. Ergonomic suitability of educational furniture and possible health implications in a university setting

    Science.gov (United States)

    Odunaiya, Nse A; Owonuwa, Dolapo D; Oguntibeju, Oluwafemi O

    2014-01-01

    Ergonomically unsuitable school furniture is frequently considered one of the major causes of severe posture problems in adulthood. This study was designed to determine the ergonomic suitability of educational furniture in the lecture theaters at the University of Ibadan to serve as a case study. Sample of convenience was used to select participants for this study. The lecture theaters were selected based on their capacity, design, and dimension. A total of 240 students (120 males and 120 females) participated in this study. The ergonomic suitability of lecture theaters was determined by analyzing the mismatches between student anthropometric dimensions and furniture dimensions, and also by analyzing the design and orientation of the lecture theaters. The data were analyzed using descriptive statistics of mean, standard deviation, range, and median. The results showed that there was a significant difference in height between males and females but no significant difference between other anthropometric variables measured. About 20% of the participants had a fitting seat height, while seat height was unsuitable for the remaining 80.4%. On the other hand, 23.3% had a fitting seat depth, while it was unsuitable for 76.7% of the participants, and 99.6% of the participants had fitting desk clearance but 0.4% found it unsuitable. A total of 25.8% of the participants had a fitting desk height, while 74.2% of the students found it unsuitable. It was concluded that the furniture in the lecture theaters at the university studied was not ergonomically suitable for the students. Hence it is recommended that further studies, including more universities across a wide spectrum of society, should be performed to determine the effect of furniture on student health, and the need to adopt the use of adjustable furniture in lecture theaters to prevent health hazards that may occur secondary to the use of unsuitable furniture. PMID:24511247

  13. A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

    OpenAIRE

    Siti Suhaily,; Mohammad Jawaid,; H. P. S. Abdul Khalil,; A. Rahman Mohamed; , F. Ibrahim

    2012-01-01

    This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and te...

  14. Characteristic and Preferences of Green Consumer Stratification As Bases to Formulating Marketing Strategies of Ecolabel-Certified Furniture

    OpenAIRE

    Ririn Wulandari; Budi Suharjo; Agus W. Soehadi; Herry Purnomo

    2012-01-01

    International furniture markets certify ecolabel has been growing, but the domestic market has not yet developed. Unfortunate, because these products have two advantages that ensure environmental sustainability and promote a furniture market. This study was expected to open and developed the domestic market for ecolabel-certified furniture. The aim of this study was to develop marketing strategies for ecolabel-certified furniture on each of green consumer stratifications. Consumer stratificat...

  15. Utilization of Anthropometry in the Sphere of Sitting and Bed Furniture

    Directory of Open Access Journals (Sweden)

    Kateřina Dvouletá

    2014-01-01

    Full Text Available Dimensions of furniture shall respond to current anthropometrical dimensions and ergonomic requirements which are recommended typological group of products. With relevance to the changes of population’s height and enlargement of body proportions (according to the last measuring from 1985, it is necessary to revise the majority of dimensions of human – furniture and standards (based on updated measuring of 375 men and women. The proper furniture designing will be dependent on that.The aim is a statistical evaluation of data from the anthropometrical measuring, acquired within the NIS grant and creating optimal dimensions of sitting and lying furniture so that they respond to the needs of current population. Graphical simulations created in ergonomic software Tecnomatix Jack are intended to illustrate the dimension requirements. The result are processed in a form of charts which are classified XS–XL. The outputs are compared to data in professional literature and standards. According to preliminary results, the optimal dimensions were designed and those will be further specified and verified. For future, it will be necessary to state the dimensions approximatively to expected population growth.

  16. Establishing an online store in the furniture retail business : Case study of Lähdesmäki Oy

    OpenAIRE

    Kareno, Justus

    2013-01-01

    This thesis describes the process of establishing an online store for a Finnish furniture retailer. The development of electronic commerce as a means of business is introduced as the force driving furniture retailers to establish an online presence. The theory of electronic commerce is presented and analyzed in terms of differences compared to sales via a conventional store. The development of electronic furniture retailing is analyzed by researching furniture retailers in Finland and th...

  17. 78 FR 17140 - Upholstered Furniture Fire Safety Technology; Meeting and Request for Comments

    Science.gov (United States)

    2013-03-20

    ... retardant (FR) chemicals, specialty fibers/fabrics without FR chemicals, inherently fire resistant materials... Furniture Fire Safety Technology; Meeting and Request for Comments AGENCY: Consumer Product Safety... Commission (CPSC, Commission, or we) is announcing its intent to hold a meeting on upholstered furniture fire...

  18. Household preferences of hybrid home heating systems – A choice experiment application

    International Nuclear Information System (INIS)

    Ruokamo, Enni

    2016-01-01

    The residential heating sector presents considerable energy savings potential, as numerous heating solutions for reducing electricity consumption and utilizing renewable energy sources are available in the market. The aim of this paper is to examine determinants of household heating system choices and to use this information for policy planning purposes. This paper investigates residential homeowner attitudes regarding innovative hybrid home heating systems (HHHS) with choice experiment. Heating system scenarios are designed to represent the most relevant primary and supplementary heating alternatives currently available in Finland. The choice sets include six main heating alternatives (district heat, solid wood, wood pellet, electric storage heating, ground heat pump and exhaust air heat pump) that are described by five attributes (supplementary heating systems, investment costs, operating costs, comfort of use and environmental friendliness). The results imply that HHHSs generally appear to be accepted among households; however, several factors affect perceptions of these technologies. The results reveal differing household attitudes toward the main heating alternatives and show that such views are affected by socio-demographic characteristics (age, living environment, education, etc.). The results suggest that households view supplementary heating systems (especially solar-based) favorably. The other attributes studied also play a significant role in decision making. - Highlights: •Study of hybrid heating where supplementary and main heating systems are combined. •Choice experiment is applied to study the determinants of hybrid heating adoption. •Hybrid heating appears to be generally accepted among households. •Households exhibit differing attitudes toward hybrid heating. •Policy makers should not underestimate the potential of hybrid heating.

  19. A research on the effect of global trends in Turkish kitchen furniture sector

    Directory of Open Access Journals (Sweden)

    Ersin Uçar

    2017-11-01

    Full Text Available Through survey results, this study evaluated global trends’ effects on Turkish kitchen furniture production. The level of knowledge and difficulties of catching up with and implementing developmental trends in the Turkish kitchen furniture sector has been seen as having a structure equivalent to world standards because the level of material and technological development has been determined by four criteria: consumer demand, housing plans, technology inadequacy, and material inadequacy. According to the results, findings in this framework, consumer demand was most influential (45.4% in capturing and implementing enterprises’ trends. Evaluation results on kitchen furniture projects implemented by Turkish enterprises within the last 5 years showed that they mostly worked with models with one-lid views in cabinet-door applications (41.6%. As a result, world trends reflect the direct influence of Turkish kitchen furniture manufacturers on cabinet-door models and color preferences for kitchen units.

  20. Supply chain improvements through clustering: Relationships and competitive collaboration in the Norwegian furniture industry

    OpenAIRE

    Lindholm, Jorunn; Rødstøl, Anna With

    2015-01-01

    Master's thesis in Firm management There is an on-going debate regarding what Norway will do when the country can no longer rely as heavily on the oil as a source of wealth and prosperity. As there is a tradition for designing and making furniture in Norway, and the furniture industry is not dependent on favourable natural conditions, this industry could represent an alternative. As the Norwegian furniture manufacturing companies are producing in one world’s most high waged countries, ...

  1. 75 FR 339 - Wooden Bedroom Furniture From the People's Republic of China: Rescission of Antidumping Duty New...

    Science.gov (United States)

    2010-01-05

    ... Republic of China: Rise Furniture Clarification Regarding Withdrawal of Review'' (November 24, 2009... Bedroom Furniture from the People's Republic of China: 2009 New Shipper Review of Rise Furniture Co., Ltd... From the People's Republic of China: Rescission of Antidumping Duty New Shipper Review AGENCY: Import...

  2. Inventory of contaminants in waste wood; Inventering av foeroreningar i returtrae

    Energy Technology Data Exchange (ETDEWEB)

    Jermer, Joeran; Ekvall, Annika; Tullin, Claes [Swedish National Testing and Research Inst., Boraas (Sweden)

    2001-03-01

    problems. Metal objects of zinc, brass and aluminium are considered to be particularly troublesome as they may plug primary air openings. PVC residues may cause considerably higher levels of chlorine in waste wood. Chemical analyses indicate that the distribution in levels of impurities varies a lot between deliveries of waste wood. Difficulties to take representative samples probably contribute to this. The knowledge of the contents of different types of waste wood (surface treated wood, preservative-treated, panels, furniture etc) in the waste wood flow is only fragmentary. Most certainly, surface treated (painted, stained etc) wood constitute the highest proportion. Preservative-treated wood, with the exception of railway sleepers and poles, is estimated to constitute approximately 5% of the waste wood flow in Sweden today and the next 25-30 years. The study has confirmed previous studies that waste wood contains a substantial proportion of fine fraction. 25-40% of the waste wood passed a sieve with a mesh size of 4 mm at screening trials. Chemical analyses indicated that the fine fraction will be the main contributor to contaminants of potassium, chlorine, sodium, zinc and lead. Further studies are suggested to focus on sorting, preparation, classification and quality assurance of waste wood.

  3. Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce

    Directory of Open Access Journals (Sweden)

    Mohammad Ghofrani

    2014-05-01

    Full Text Available In This research, the scratch strength (Cross-Cut Test of clear paints (nitrocellulose lacquers and acid catalyst lacquers of wood species Beech, Elm, Alder and spruce were studied as a function of moisture content (MC of the samples. For this purpose, lumbers (550×110×12 mm were cut from sapwood in tangential surfaces and were air dried for one month according to wood drying procedures. Then, for pre-conditioning of moisture content, at the levels of 8%, 12% and 15%, the samples were placed in three clima rooms. Then, finish applied and strength tests were performed. The results revealed that for acid catalyst lacquers the highest scratch strength (10.4% belongs to Elm wood with 8% moisture content, and the lowest scratch strength (53.6% belongs to Spruce wood with nitrocellulose lacquers having 15% moisture content.

  4. World trade in forest products and wood fuel

    International Nuclear Information System (INIS)

    Hillring, Bengt

    2006-01-01

    Wood fuel is a strategic resource for future energy supply and is usually utilised locally. Traditional use of wood fuel and other bioenergy has a share of 10-15% energy supply, used mainly for the household sector. The utilisation for industrial purposes is much smaller but is a strategic resource in the effort to fulfil the Kyoto agreement to replace fossil fuels and to mitigate greenhouse gas emissions. Many industrialised countries already use a significant share of biofuels in their energy supply e.g. Nordic countries while others like some other European Union countries are planning to increase their use. Production and use of biofuels need to be carried out sustainable. Official statistics do not report trade in such detail that international trade in different biomass types can be fully identified. However, FAO and European Forestry Institute are important sources. In some countries, there is a growing interest in the international trade, because the trade can provide biofuels at lower prices, larger quantities and better quality than domestic alternatives. The first signs of an international market price for wood fuel are indicated in Europe. For the future both the use and the trade of wood fuel is expected to increase. Analyses for trade in charcoal, wood chips, fuel wood and wood residues made in this report identify 'hot' trade spots in Europe, in south East Asia and in North America

  5. Effectiveness of policy instruments for supporting the use of waste wood as a renewable energy resource in the Czech Republic

    International Nuclear Information System (INIS)

    Jehlickova, Bohumira; Morris, Richard

    2007-01-01

    This paper focuses on an examination of the government's strategy for encouraging the use of wood as a renewable fuel in Czech households. It examines the development of modern combustion technology and its impact on the environment. It describes the estimated requirement for wood by an average household and examines the overall availability of wood as a renewable fuel in the Czech Republic. The paper analyses in detail the policy instruments used by the Czech government to promote the use of this technology. It evaluates the impact of this policy on the users of the technology and practical achievements of the policy measures with respect to the overall objective that is the promotion of generation of renewable energy

  6. Swedish recovered wood waste: linking regulation and contamination.

    Science.gov (United States)

    Krook, J; Mårtensson, A; Eklund, M; Libiseller, C

    2008-01-01

    In Sweden, large amounts of wood waste are generated annually from construction and demolition activities, but also from other discarded products such as packaging and furniture. A large share of this waste is today recovered and used for heat production. However, previous research has found that recovered wood waste (RWW) contains hazardous substances, which has significant implications for the environmental performance of recycling. Improved sorting is often suggested as a proper strategy to decrease such implications. In this study, we aim to analyse the impacts of waste regulation on the contamination of RWW. The occurrence of industrial preservative-treated wood, which contains several hazardous substances, was used as an indicator for contamination. First the management of RWW during 1995-2004 was studied through interviews with involved actors. We then determined the occurrence of industrial preservative-treated wood in RWW for that time period for each supplier (actor). From the results, it can be concluded that a substantially less contaminated RWW today relies on extensive source separation. The good news is that some actors, despite several obstacles for such upstream efforts, have already today proved capable of achieving relatively efficient separation. In most cases, however, the existing waste regulation has not succeeded in establishing strong enough incentives for less contaminated waste in general, nor for extensive source separation in particular. One important factor for this outcome is that the current market forces encourage involved actors to practice weak quality requirements and to rely on end-of-pipe solutions, rather than put pressure for improvements on upstream actors. Another important reason is that there is a lack of communication and oversight of existing waste regulations. Without such steering mechanisms, the inherent pressure from regulations becomes neutralized.

  7. Measurement and human exposure assessment of brominated flame retardants in household products from South China.

    Science.gov (United States)

    Chen, She-Jun; Ma, Yun-Juan; Wang, Jing; Tian, Mi; Luo, Xiao-Jun; Chen, Da; Mai, Bi-Xian

    2010-04-15

    Brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs), and decabromodiphenyl ethane (DBDPE) were examined in household products in the Pearl River Delta, South China, including electronic appliances, furniture and upholstery, car interiors, and raw materials for electronics. The concentrations of PBDEs derived from penta-BDE mixture were much lower (electronic products and their reuse might be also a potential important source of discontinued PBDEs to the environment. DBDPE was found in 20.0% of all the samples, ranging from 311 to 268,230 ng/g. PBDE congener profiles in both the household products and raw materials suggest that some less brominated BDEs in the environment may be derived from the decomposition of higher brominated PBDEs in PBDE-containing products in process of the manufacturing, use and/or recycling. Human exposure to PBDEs from household products via inhalation ranged from 175 to 612 pg/kg bw day, accounting for a small proportion of the total daily exposure via indoor inhalation. Despite the low deleterious risk associated with household products with regard to PBDEs, they are of special concern because of the relatively higher exposures observed for young children and further work is required. 2009 Elsevier B.V. All rights reserved.

  8. FEA analysis and design optimization for a multifunctional piece of furniture

    Directory of Open Access Journals (Sweden)

    Haraga Georgeta

    2017-01-01

    Full Text Available The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with a solid modelling for the creation of the desired piece of multifunctional furniture is used in this case, the automatic generation of the finite element meshes. Getting more accurate results for the mesh refinement process can be made by changing parameters. The article outlines the developed model for analysing the supporting structure of the armchair. This model provides simulating of the different loads and checking the raised stresses and deformation in the structures analysed. The main objective of this research is to evaluate strength of wooden cedar armchair for a person weighing 140 kg and for this the finite element analysis (FEA has been used. Multifunctional furniture is the answer to the challenges contemporary lifestyle, creativity in design activities that require optimal space utilization and reducing costs.

  9. Avaliação da madeira de Eucalyptus camaldulensis Dehnh e Eucalyptus urophylla S.T. Blake em ensaios de usinagem, visando à produção moveleira Evaluation of the woods of Eucalyptus camaldulensis Dehnh and Eucalyptus urophylla S.T. Blake During machining tests for use by the furniture industry

    Directory of Open Access Journals (Sweden)

    Maria Odete Alves de Souza

    2009-08-01

    Full Text Available Este estudo teve como objetivo avaliar a potencialidade de uso da madeira de clones de Eucalyptus urophylla S. T. Blake, de 6 e 8 anos, e Eucalyptus camaldulensis Dehnh, de 10 anos, no que tange aos processos de usinagem, visando ao seu uso na indústria de móveis. A madeira utilizada originou-se de plantios comerciais cultivados em sistema de consórcio agrossilvipastoril, proveniente da Votorantim Metais Zinco S/A, situada no Município de Vazante, no Estado de Minas Gerais. Utilizaram-se seis árvores por clone, totalizando 18 exemplares. Foram realizados os seguintes ensaios de usinagem: corte paralelo às fibras, corte transversal às fibras, fresagem, aplainamento, furação, furação para espiga, furação para cavilha e moldura. Os resultados mostraram-se satisfatórios, com destaque para o clone de Eucalyptus urophylla com 8 anos, principalmente nos ensaios de corte paralelo e furação para espiga, apresentando grande potencial de uso da espécie para produção de móveis. A madeira dos clones testados apresentou bom desempenho na realização dos ensaios de usinagem, no que se refere à trabalhabilidade, não havendo entraves na sua utilização como fonte de matéria-prima na indústria moveleira.The objective of this research was to conduct machining tests in woods of 6 and 8-year-old Eucalyptus urophylla and of a ten-year old Eucalyptus camaldulensis and to evaluate their possible use by the furniture industry. The wood samples were obtained from six trees of each clone, planted in a consortium with cattle and grain, owned by Votorantim Metals and Zinc. The plantation is located in the neighborhood of the city of Vazante, in the State of Minas Gerais. The following essays were conducted: cut by a table saw either parallel or perpendicular to the grain; shaping; planing; drilling; routing; mortising and drilling for dowels. All the samples yielded satisfactory results, mainly the eight year old Eucalyptus urophylla, during

  10. Bamboo as sustainable material for furniture design in disaster and remote areas in Indonesia

    Science.gov (United States)

    Sofiana, Yunida; Wahidiyat, Mita; Caroline, Octaviana Sylvia

    2018-03-01

    Bamboo has been known as a sustainable material for architecture, but only used on a small scale for furniture. However, even though it a sustainable resource, many people considered Bamboo as outcast material for furniture because of its appearance. Evidently, the use of bamboo is often used to make simple tools with similar traditional designs for everyday life. The tradition of using bamboo was not further explored with respect to the ongoing development of creative design and function in the era of today’s modern technology. In retrospect to the above issues, this study is aimed to introduce the used of bamboo for material furniture in disaster and remote areas in Indonesia to increases their quality of life. It uses a research by a method of collecting data through surveys, literature review, interviews and training to determine the types of bamboo used for material furniture in disaster and remote territories. The results of this study is intended to show that the use of bamboo can be further developed into furniture for disaster and remote territory to create higher values of the products and increase the quality of life.

  11. Prevalence trends of wood use as the main cooking fuel in Mexico, 1990-2013

    Directory of Open Access Journals (Sweden)

    Eduardo Hernández-Garduño

    2017-01-01

    Full Text Available Objective. To determine prevalence trends of using Wood as the Main Cooking Fuel (WMCF in Mexico and household characteristics that predict its use. Materials and methods. Estimates were obtained from the 1990, 2000 and 2010 censuses and from a national survey performed in 2012 and 2013. Results. In 2012-2013, 9.5% of the 66 321 surveyed households and 10.9% of their 252 011 residents used WMCF. Prevalence was higher in rural (40.5% than urban areas (1.5%, p<0.0001. From 1990 to 2013 wood use decreased by 53% overall and by 28.6% in rural areas, gas use increased respectively by 17.5 and 52.7%. Predictors of using WMCF were living in rural or suburban areas and those associated with low socioeconomic status. Conclusion. Use of WMCF has decreased substantially in Mexico but at a slower pace in rural areas. Improving household characteristics and socioeconomic status may decrease use of WMCF at a higher rate.

  12. Flexibility in Modular Furniture Systems in Open Offices, Famagusta, North Cyprus

    OpenAIRE

    E. Farjami; La. Mohammadzadeh Afshar; Li. Mohammadzade Afshar; A. Taran

    2014-01-01

    Nowadays, flexibility introduced as a modern technology in furniture systems especially in interior planning design. According to results, the most important impact of these systems can be seen on open plan design that makes workspaces comfortable and increases the productivity of employees besides making good relationship between them. Briefly, there are some factors along with new systems in furniture design help create inappropriate space to make working better and easier while it has modu...

  13. FEA analysis and design optimization for a multifunctional piece of furniture

    OpenAIRE

    Haraga Georgeta; Goanță Adrian Mihai

    2017-01-01

    The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA) application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with...

  14. Household reporting of childhood respiratory health and air pollution in rural Alaska Native communities

    Directory of Open Access Journals (Sweden)

    Desirae N. Ware

    2014-05-01

    Full Text Available Background: Air pollution is an important contributor to respiratory disease in children. Objective: To examine associations between household reporting of childhood respiratory conditions and household characteristics related to air pollution in Alaska Native communities. Design: In-home surveys were administered in 2 rural regions of Alaska. The 12-month prevalence of respiratory conditions was summarized by region and age. Odds ratios (ORs were calculated to describe associations between respiratory health and household and air quality characteristics. Results: Household-reported respiratory health data were collected for 561 children in 328 households. In 1 region, 33.6% of children aged <5 years had a recent history of pneumonia and/or bronchitis. Children with these conditions were 2 times more likely to live in a wood-heated home, but these findings were imprecise. Resident concern with mould was associated with elevated prevalence of respiratory infections in children (ORs 1.6–2.5, while reported wheezing was associated with 1 or more smokers living in the household. Reported asthma in 1 region (7.6% was lower than national prevalence estimates. Conclusions: Findings suggest that there may be preventable exposures, including wood smoke and mould that affect childhood respiratory disease in these rural areas. Additional research is needed to quantify particulate matter 2.5 microns in aerodynamic diameter or less and mould exposures in these communities, and to objectively evaluate childhood respiratory health.

  15. The Potential of Computer Controlled Optimizing Equipment in the Wooden Furniture Industry

    Science.gov (United States)

    R. Edward Thomas; Urs Buehlmann; Urs Buehlmann

    2003-01-01

    The goal of the wooden furniture industry is to convert lumber into parts by using the most efficient and cost effective processing methods. The key steps in processing lumber arc removing the regions that contain unacceptable defects or character marks and cutting the remaining areas to the widths and lengths of needed parts. Such equipment has been used in furniture...

  16. 77 FR 1456 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Rescission of...

    Science.gov (United States)

    2012-01-10

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  17. Sustainable Furniture that Grows with End-Users

    NARCIS (Netherlands)

    Bosch, T.; Verploegen, K.; Grösser, S.N.; Rhijn, G. van

    2017-01-01

    Economically and environmentally it might be more responsible or even feasible to combine products and services to elongate product lifetime. Gispen, a major office furniture producer in the Netherlands, has embraced circular economic principles to create new business, extend product life time and

  18. Ergonomic and anthropometric consideration for library furniture in an Iranian public university.

    Science.gov (United States)

    Osquei-Zadeh, R; Ghamari, J; Abedi, M; Shiri, H

    2012-01-01

    In our competing educational world, students spend a considerable part of their daily life, studying at library furniture. Not surprisingly, due to lack of proper anthropometric databases, these products have typically been ill fitted for the intended user populations. To verify the optimum anthropometric match of library furniture within an academic environment, through a combined qualitative and quantitative approach. 267 (120 female and 147 male) students, were subjected to 11 standard anthropometric measurements. In line with the measurements, subjective evaluations were also considered through detailed fitting trials on selected groups of participants. Combinational equations defined the unacceptable furniture dimensions according to elbow and sitting popliteal heights, mainly for smaller and taller divisions of the studied population, which were systematically comparable along with subjective and objective outcomes. In brief, if we classified studied students into "small," "medium," and "tall" groups, the design dimensions should be altered by -5.1, -2.2, and +1.6 cm for chair seat height; and by -8.3, -5.4, and +1.1 cm for table height, for each student group, respectively. The furniture size to be used by Iranian students should be changed to fit their anthropometric measures.

  19. Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

    Science.gov (United States)

    Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur

    2015-01-01

    Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children’s age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6–9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children’s ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement. PMID:26053154

  20. STRUCTURAL EFFECTS AND MUTATIONS CAUSED BY THE ECONOMIC CRISIS ON FURNITURE TRADE AT THE EUROPEAN UNION LEVEL

    Directory of Open Access Journals (Sweden)

    Radu Marginean

    2013-12-01

    Full Text Available he global economic crisis had most negative effects on the entire economic sphere and especially in what the consuming industry is concerned, which may be considered “luxurious”, the way in which we may talk about the furniture industry. Along times of economic crisis at social level, a decrease in financial power at microeconomic, individual level is felt. Under conditions of social decrease in buying capacity, the request for commercial furniture is in rapid fall and thus the industry as such suffers serious structural mutations. Analyzing a series of macroeconomic indices from the European furniture industry led to the result that during the late years there has been a positive trend within the furniture industry in matters of production, however, with concern to trading, the situation is more complicated. There is a behaviour difference in the furniture industry between emergent countries and EU developed states and based on the performed analysis, a SWOT analysis at sectorial level crystallized, in which we propose ways of growth in the European furniture industry.

  1. PHYSICAL AND MECHANICAL PROPERTIES OF Araucaria angustifolia (Bertol. WOOD FOR THREE STRATUM PHYTOSOCIOLOGICAL

    Directory of Open Access Journals (Sweden)

    Rafael Beltrame

    2010-11-01

    Full Text Available The study of physical and mechanical properties of wood is essential for industrial use both in construction and the manufacture of furniture. Thus, the study aimed to determine the physical and mechanical properties of the Araucaria angustifolia wood in terms of three strata phytosociological. For this, 15 trees were felled, five belonging to the upper stratum, the middle stratum five and five for the lower strata. The trees were deployed for the preparation of specimens used for mechanical testing. In the mechanical characterization of the species assays were performed for impact resistance, static bending, compression axial and perpendicular to the fibers. As for the characterization of physical properties, determined the apparent specific gravity at 12% relative humidity for each extract. The results did not show significant differences in the tests of impact resistance and static bending to the strata phytosociological. As for the apparent specific gravity, compression axial and perpendicular there was a change in the values of propertiesbetween the strata phytosociological, is generally butter in the middle and upper strata. Therefore the physical and mechanical properties tend to present higher values these two strata. The data analysis allowed of Araucaria angustifolia wood has moderate mechanical strength when compared with other species studies.

  2. Factors and methods of analysis and estimation of furniture making enterprises competitiveness

    Directory of Open Access Journals (Sweden)

    Vitaliy Aleksandrovich Zhigarev

    2015-06-01

    Full Text Available Objective to describe the author39s methodology for estimating the furnituremaking enterprises competitiveness with a view to carry out the economic evaluation of the efficiency of furniture production the evaluation of the internal component of the furniture production efficiency the identification of factors influencing the efficiency of furnituremaking companies and areas for improving it through improvements in product range production and sales policy of the enterprise. The research subject is modern methods and principles of competitiveness management applicable in a rapidly changing market environment. Methods in general the research methodology consists of six stages differentiated by methods objectives and required outcomes. The first stage of the research was to study the nature of demand within the target market of a furnituremaking enterprise. The second stage was to study the expenditures of a furnituremaking enterprise for implementing individual production and sales strategies. The third stage was to study competition in the market. The fourth stage was the analysis of possibilities of a furnituremaking enterprise in producing and selling furniture in terms of factor values combinations. The fifth stage was the reexamination of the demand with a view to its distribution according to the factor space. The final sixth stage was processing of data obtained at the previous stages and carrying out the necessary calculations. Results in general the above methodology of economic evaluation of the efficiency of furniture production based on the previously developed model gives the managers of enterprises an algorithm for assessing both market and firmlevel component of the furniture production efficiency allowing the subsequent identification and evaluation of the efficiency factors and the development of measures to improve the furniture production and sale efficiency as well as the assortment rationalization production and sales policy

  3. Mechanical and natural durability properties of wood treated with a novel organic preservative/consolidant product

    International Nuclear Information System (INIS)

    Lionetto, Francesca; Frigione, Mariaenrica

    2009-01-01

    An organic preservative/consolidant of new formulation was selected in order to evaluate its effect on the mechanical properties of worm-eaten walnut wood. Walnut wood is widely used for the realization of artistic handworks (e.g. statues, altars, etc.) furniture and flooring. The flexural strength and modulus of elasticity, the toughness and the hardness were determined on both treated and untreated samples. The experimental results showed that the product increased significantly the flexural strength while the other mechanical properties were not appreciably affected by the chemical treatment. The microstructure of the samples tested was observed using scanning electron microscopy. The preserving character against insects of the investigated product was assessed by both visual inspection and measurements of weight loss on the treated specimens after their exposure to living insects. The samples on which the product was applied, exposed to Oligomerus ptilinoides for one year, were more resistant to decay than the corresponding untreated samples.

  4. The Opportunity of International Manufacturing Organization for Lithuania's Large Furniture Enterprises

    Directory of Open Access Journals (Sweden)

    Tomas Baltuška

    2016-04-01

    Full Text Available This article analysis international manufacturing theory, current situation in Lithuania’s large furniture enterprises, opportunities for international manufacturing, the advantages of such strategy and the problems that comes along from introduction and imple-mentation of such strategy. The main purposes of this article are to analyze sector of furniture enterprises, examples of successful enterprises of international manufactures. Survey data is analyzed and the conclusions are formulated, which reflect the benefits of the system put in place by companies.

  5. Wood is burning in capital city area's fireplaces as well

    International Nuclear Information System (INIS)

    Luoma, H.

    1998-01-01

    The firewood market situation in the capital city area was examined by a mail questionnaire in the spring of 1997. The questionnaire form was distributed to 800 single-family houses in Espoo, Helsinki and Vantaa. The responses to the questionnaire numbered 297 (37 %). Wood was found to be the main source of heat energy in the households of 2 % of the respondents and as an alternative source of heat energy in 58 % of the households. The most common fireplace in the respondents' homes was a wood-fired sauna stove. Heat-accumulating fireplaces were in the second place and open fireplaces in the third place. The installation of heat-accumulating fireplaces has become more popular while wood-fired sauna stoves and open fireplaces have lost some of their popularity during the past few years. Thirteen percent of the owners responding to the questionnaire intend to install new fireplaces. Half of the respondents were of the opinion that there is nothing to restrict the use of their fireplaces. Those who felt that there were restrictions stated that the high cost of firewood was the most significant restricting factor. Other restricting factors were the difficulty of getting firewood and the shortcomings of wood storage facilities. The storage problem can be dealt with by, for example, resorting to joint purchases, in which case the batch of wood for one house can be smaller in size. One quarter of the interviewers showed interest in concerted purchasing and deliveries of wood. An average of 3.6 m 3 of wood was used in the single-family houses in the capital city area in 1996. This wood was obtained either by purchasing it, from one's own forest/block of land or by some other independent means (not by purchasing). These three forms of acquiring wood were almost equally important. Typically, firewood was bought the form of logging residues. The greatest demand is for bulk batches of chopped firewood. When firewood is purchased, the customer typically prefers to have it

  6. Opportunities for development of local forest markets: the case of Amish furniture manufacturing

    Science.gov (United States)

    Matt Bumgardner; Gary Graham; Charles. Goebel

    2012-01-01

    A dramatic decline in the production of hardwood furniture in the United States has had profound impacts on employment and hardwood markets. Against this backdrop, the Amish-based furniture manufacturing cluster in Ohio has expanded and hardwood lumber consumption by the cluster is significant. Recent research suggests that 71 percent of firms in the cluster expanded...

  7. Aim for Wow-ability when Selecting Student Center Furniture.

    Science.gov (United States)

    Payne, Jill M.

    2003-01-01

    Advises colleges to keep in mind several qualities when purchasing furniture for student centers: durability, cleanability, repairability, flexibility, storability, credibility, sustainability, comfort, affordability, and "wowability." (EV)

  8. 46 CFR 169.323 - Furniture and furnishings.

    Science.gov (United States)

    2010-10-01

    ... of fire resistant materials. (b) Existing solid wooden furniture may be retained on existing vessels. (c) Draperies must be fabricated of fire resistant fabrics. (d) Rugs and carpets must be of wool or other material having equivalent fire resistant qualities. (e) Trash receptacles must be constructed of...

  9. 75 FR 72794 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-11-26

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  10. 75 FR 5952 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-02-05

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  11. Ergonomic and Anthropometric Consideration for Library Furniture in an Iranian Public University

    Directory of Open Access Journals (Sweden)

    R Osquei-Zadeh

    2011-12-01

    Full Text Available Background: In our competing educational world, students spend a considerable part of their daily life, studying at library furniture. Not surprisingly, due to lack of proper anthropometric databases, these products have typically been ill fitted for the intended user populations. Objective: To verify the optimum anthropometric match of library furniture within an academic environment, through a combined qualitative and quantitative approach. Methods: 267 (120 female and 147 male students, were subjected to 11 standard anthropometric measurements. In line with the measurements, subjective evaluations were also considered through detailed fitting trials on selected groups of participants. Results: Combinational equations defined the unacceptable furniture dimensions according to elbow and sitting popliteal heights, mainly for smaller and taller divisions of the studied population, which were systematically comparable along with subjective and objective outcomes. In brief, if we classified studied students into “small,” “medium,” and “tall” groups, the design dimensions should be altered by -5.1, -2.2, and +1.6 cm for chair seat height; and by -8.3, -5.4, and +1.1 cm for table height, for each student group, respectively. Conclusion: The furniture size to be used by Iranian students should be changed to fit their anthropometric measures.

  12. THE PARTICULARITIES OF THE COST CALCULATION METHOD ON COMMANDS IN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Felicia Sabou

    2014-10-01

    Full Text Available The paper present the importance of the method on commands in cost calculation and the particularities of the cost calculation method on commands in the furniture industry. This paper presents a hypotetical study on the method on commands, considering the observations made during 2013-2014, on how it is organized and managed accounts management using method on commands.By presenting this hypothetical model about the accounting in management accounting using the method on commands, the paper contributes to the correct application of this method in practice, specifically in management accounting in companies from the furniture industry. In my opinion the method on commands is an appropriate method for achieving management accounting for companies that have as main activity the production of furniture. When applying the method on commands in cost calculation and in management accounting, the companies must to consider the particularities of the cost calculation, in the furniture industry, like: technical and economic factors from this sector, the technical details of each command, the codification of the commands, planning materials and labor costs for each command, monitoring and recording production costs, registration of the direct costs, distribution of the indirect costs on commands, registration of the indirect costs and registration in management accounting.

  13. Measurement and human exposure assessment of brominated flame retardants in household products from South China

    International Nuclear Information System (INIS)

    Chen Shejun; Ma Yunjuan; Wang Jing; Tian Mi; Luo Xiaojun; Chen Da; Mai Bixian

    2010-01-01

    Brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs), and decabromodiphenyl ethane (DBDPE) were examined in household products in the Pearl River Delta, South China, including electronic appliances, furniture and upholstery, car interiors, and raw materials for electronics. The concentrations of PBDEs derived from penta-BDE mixture were much lower (<111 ng/g) than those for octa- and deca-BDE commercially derived PBDEs, with maximum values of 15,107 and 1,603,343 ng/g, respectively, in all the household products. Our findings suggest the recycling of old electronic products and their reuse might be also a potential important source of discontinued PBDEs to the environment. DBDPE was found in 20.0% of all the samples, ranging from 311 to 268,230 ng/g. PBDE congener profiles in both the household products and raw materials suggest that some less brominated BDEs in the environment may be derived from the decomposition of higher brominated PBDEs in PBDE-containing products in process of the manufacturing, use and/or recycling. Human exposure to PBDEs from household products via inhalation ranged from 175 to 612 pg/kg bw day, accounting for a small proportion of the total daily exposure via indoor inhalation. Despite the low deleterious risk associated with household products with regard to PBDEs, they are of special concern because of the relatively higher exposures observed for young children and further work is required.

  14. Measurement and human exposure assessment of brominated flame retardants in household products from South China

    Energy Technology Data Exchange (ETDEWEB)

    Chen Shejun [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Ma Yunjuan [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Zhuhai Environmental Moniorting Center, Zhuhai 519000 (China); Wang Jing; Tian Mi [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Luo Xiaojun [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Chen Da [Department of Environmental and Aquatic Animal Health, Virginia Institute of Marine Science, College of William and Mary, Gloucester Point, VA 23062 (United States); Mai Bixian, E-mail: nancymai@gig.ac.cn [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China)

    2010-04-15

    Brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs), and decabromodiphenyl ethane (DBDPE) were examined in household products in the Pearl River Delta, South China, including electronic appliances, furniture and upholstery, car interiors, and raw materials for electronics. The concentrations of PBDEs derived from penta-BDE mixture were much lower (<111 ng/g) than those for octa- and deca-BDE commercially derived PBDEs, with maximum values of 15,107 and 1,603,343 ng/g, respectively, in all the household products. Our findings suggest the recycling of old electronic products and their reuse might be also a potential important source of discontinued PBDEs to the environment. DBDPE was found in 20.0% of all the samples, ranging from 311 to 268,230 ng/g. PBDE congener profiles in both the household products and raw materials suggest that some less brominated BDEs in the environment may be derived from the decomposition of higher brominated PBDEs in PBDE-containing products in process of the manufacturing, use and/or recycling. Human exposure to PBDEs from household products via inhalation ranged from 175 to 612 pg/kg bw day, accounting for a small proportion of the total daily exposure via indoor inhalation. Despite the low deleterious risk associated with household products with regard to PBDEs, they are of special concern because of the relatively higher exposures observed for young children and further work is required.

  15. The Instituto Nacional de Pesquisas da Amazonia-INPA solar dryer: an economical alternative for wood drying; O secador solar do INPA: uma alternativa economica para secar madeira

    Energy Technology Data Exchange (ETDEWEB)

    Moraes-Duzat, Rejane; Barbosa, Ana Paula; Vetter, Roland [Instituto Nacional de Pesquisas da Amazonia (INPA), Manaus, AM (Brazil)]. E-mail: duzat@inpa.gov.br; apaula@inpa.gov.br

    2000-07-01

    As an alternative to the expensive and high energy consuming conventional dryers available at the market, INPA developed a solar wood dryer technically adequate to the climatic conditions of the Amazon region, and economically suitable to an industrial segment that could not afford large investments to dry wood. The dryer has received great acceptance by the industry due to its low cost and good operating efficiency. The prototype was dimensioned with a capacity of 5 to 8 m{sup 3} of sawn wood, which is sufficient for the needs of small sawmills or furniture shops. A total of 20 units have been installed in Brazil and other countries. Research work is underway to improve the performance of the original model, and some modifications are conducted to adapt it to dry other natural products as seeds, nuts, fruits, and herbs. (author)

  16. 76 FR 65684 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-10-24

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  17. Flame retardants in UK furniture increase smoke toxicity more than they reduce fire growth rate.

    Science.gov (United States)

    McKenna, Sean T; Birtles, Robert; Dickens, Kathryn; Walker, Richard G; Spearpoint, Michael J; Stec, Anna A; Hull, T Richard

    2018-04-01

    This paper uses fire statistics to show the importance of fire toxicity on fire deaths and injuries, and the importance of upholstered furniture and bedding on fatalities from unwanted fires. The aim was to compare the fire hazards (fire growth and smoke toxicity) using different upholstery materials. Four compositions of sofa-bed were compared: three meeting UK Furniture Flammability Regulations (FFR), and one using materials without flame retardants intended for the mainland European market. Two of the UK sofa-beds relied on chemical flame retardants to meet the FFR, the third used natural materials and a technical weave in order to pass the test. Each composition was tested in the bench-scale cone calorimeter (ISO 5660) and burnt as a whole sofa-bed in a sofa configuration in a 3.4 × 2.25 × 2.4 m 3 test room. All of the sofas were ignited with a No. 7 wood crib; the temperatures and yields of toxic products are reported. The sofa-beds containing flame retardants burnt somewhat more slowly than the non-flame retarded EU sofa-bed, but in doing so produced significantly greater quantities of the main fire toxicants, carbon monoxide and hydrogen cyanide. Assessment of the effluents' potential to incapacitate and kill is provided showing the two UK flame retardant sofa-beds to be the most dangerous, followed by the sofa-bed made with European materials. The UK sofa-bed made only from natural materials (Cottonsafe ® ) burnt very slowly and produced very low concentrations of toxic gases. Including fire toxicity in the FFR would reduce the chemical flame retardants and improve fire safety. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  18. Sistem Dinamis Industri Furniture Indonesia Dari Perspektif Supply Chain Management Yang Berkelanjutan

    OpenAIRE

    Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang

    2010-01-01

    This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulatio...

  19. Sistem Dinamis Industri Furniture Indonesia dari Perspektif Supply Chain Management yang Berkelanjutan

    OpenAIRE

    Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang

    2012-01-01

    This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulatio...

  20. Educational Furniture for the 16-19 Age Group: Specification and Design. Design Note 30.

    Science.gov (United States)

    Furniture Industry Research Association, Stevenage (England).

    A 1982 British study examined the furniture needs of 16-19 year-old students. This report presented the findings on the technical and performance requirements in terms of durability and ergonomics. This report examines the furniture requirements in teaching spaces, social, refreshment and private study areas, storage requirements for pupils'…

  1. Application of E-commerce based Internet Plus Strategy in the Chinese Furniture industry with analysis on case study and business model canvas

    OpenAIRE

    Cheng, Yun

    2016-01-01

    Furniture is one of the most important necessities in people’s daily life. The development of furniture industry can also be regarded as the progress of society. China is the world’s biggest furniture manufacturer and exporter. After the rapid development in past few decades, the production, technology and quality of furniture has already mature. However, the traditional marketing models are showing disadvantages. It is important for furniture companies to explore profitable marketing models ...

  2. FINANCIAL LIQUIDITY OF THE FURNITURE INDUSTRY COMPANIES IN POLAND IN 2006–2013

    Directory of Open Access Journals (Sweden)

    Zbigniew Gołaś

    2015-12-01

    Full Text Available The aim of the study was to present the diversity and conditions of companies’ liquidity in the Polish furniture industry. In the analysis, the statistical data, CSO, 2006–2013 for the furniture manufacturing enterprise sector (Chapter 31 manufacturing, PKD 2007 was used. The carried out analysis showed that the furniture industry companies in Poland in the years 2006–2013 in general had the ability to meet their current liabilities. Current and quick liquidity developed for them on a stable and positive level, coinciding with the recommendations of the theory of fi nance. However, from the working capital cycle’s point of view, the assessment of liquidity furniture manufacturing sector is clearly less favourable, and it results from relatively long collecting dues cycles ranging close to 60 days. The less favourable assessment comes from the fact that the long collecting dues cycles have eff ects on exceeding duration of the recovery measures’ applications, which in turn, may turn into a build-up of the payment backlogs, and thus into reductions of the ability to fi nance business and into the risk of production’s reduction

  3. Household air pollution and personal exposure to nitrated and oxygenated polycyclic aromatics (PAHs) in rural households: Influence of household cooking energies.

    Science.gov (United States)

    Chen, Y; Du, W; Shen, G; Zhuo, S; Zhu, X; Shen, H; Huang, Y; Su, S; Lin, N; Pei, L; Zheng, X; Wu, J; Duan, Y; Wang, X; Liu, W; Wong, M; Tao, S

    2017-01-01

    Residential solid fuels are widely consumed in rural China, contributing to severe household air pollution for many products of incomplete combustion, such as polycyclic aromatic hydrocarbons (PAHs) and their polar derivatives. In this study, concentrations of nitrated and oxygenated PAH derivatives (nPAHs and oPAHs) for household and personal air were measured and analyzed for influencing factors like smoking and cooking energy type. Concentrations of nPAHs and oPAHs in kitchens were higher than those in living rooms and in outdoor air. Exposure levels measured by personal samplers were lower than levels in indoor air, but higher than outdoor air levels. With increasing molecular weight, individual compounds tended to be more commonly partitioned to particulate matter (PM); moreover, higher molecular weight nPAHs and oPAHs were preferentially found in finer particles, suggesting a potential for increased health risks. Smoking behavior raised the concentrations of nPAHs and oPAHs in personal air significantly. People who cooked food also had higher personal exposures. Cooking and smoking have a significant interaction effect on personal exposure. Concentrations in kitchens and personal exposure to nPAHs and oPAHs for households using wood and peat were significantly higher than for those using electricity and liquid petroleum gas (LPG). © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Desain Dan Implementasi Augmented Reality Berbasis Web Pada Aplikasi Furniture Shopping Manager Sebagai Alat Bantu Belanja Online

    OpenAIRE

    Pramono, Basworo Ardi

    2012-01-01

    Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM) sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya. FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online. Aplikasi FSM dikembang...

  5. DESAIN DAN IMPLEMENTASI AUGMENTED REALITY BERBASIS WEB PADA APLIKASI FURNITURE SHOPPING MANAGER SEBAGAI ALAT BANTU BELANJA ONLINE

    OpenAIRE

    Basworo Ardi Pramono

    2012-01-01

    Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM) sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya.  FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online.   Aplikasi FSM dike...

  6. An engineering economic assessment of whole-house residential wood heating in New York

    Science.gov (United States)

    Wood devices are being selected increasingly for residential space heating by households in New York State. Motivations for their use include energy independence, mitigating climate change, stimulating local economic development, and reducing exposure to high and variable fuel c...

  7. Study of mechanical properties of Palosangre wood (Brosimum rubescens Taub.), from Leticia-Colombia provenance

    International Nuclear Information System (INIS)

    Triana Gomez, Max Alejandro; Gonzalez Roso, Gladis; Paspur Posso, Segundo Demetrio

    2008-01-01

    The technical recommendations of the Pan-American Committee of Technical Norms COPANT were applied for carrying out technological tests of tangential static flexion, parallel compression, tangential parallel shear, radial parallel shear, tangential impact, and radial impact in the wood of Brosimum rubescens Taub. (Moraceae) coming from Leticia, state of Amazonas, Colombia. The statistical analysis was made based on the arithmetic mean, the standard deviation and the variation coefficient to obtain representativeness. Results were adjusted to 12% of content of humidity. The mechanical properties of the wood were also classified, and its possible uses determined. The wood of B. rubescens exhibited the best response to the static flexion effort. According to the ASTM classification, the elasticity module (MOE) and the Maximum Unitary Effort corresponded to the Very High range, while the Proportional Limit Effort to the Middle range. The Maximum Unitary Effort and Proportional Limit Effort obtained for the parallel compression were assigned to the High and Medium ranges, respectively, while the tangential shear matched the High range. The less favorable response was found for the radial shear effort and the impact in the tangential and radial planes that corresponded to the Medium range. It was found that the most appropriate uses of the wood were: interior finishes, external finishes, athletic and sport articles, hand crafts, ends for tools, joinery, furniture, chassis, piles, musical instruments, construction, arches for violin and similar musical instruments, breeches for weapons, structures, mischievous, keels, floors and beams.

  8. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  9. Evaluation of Airborne MDF Dust Concentration in Furniture Factories

    Directory of Open Access Journals (Sweden)

    Renilson Luiz Teixeira

    2017-10-01

    Full Text Available ABSTRACT High concentrations of airborne dust are observed during the cutting of medium density fiberboard (MDF boards. This dust, at first considered just uncomfortable for workers, may be harmful to their health. The objective of this work was to evaluate the concentration of airborne dust during the cutting of medium density fiberboard (MDF. The experiment was developed in the MDF cutting sector of three furniture factories located in the city of Lavras/MG. The results showed that the mean concentrations of total dust suspended in these three furniture factories were above the tolerance limit set by the American Conference of Governmental Industrial Hygienists (ACGIH, giving evidence of a serious problem in these companies related to this type of risk agent.

  10. TECHNIQUE OF AN ASSESSMENT OF COMPETITIVENESS OF THE ENTERPRISES OF THE FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Vitaliy A. Zhigarev

    2015-01-01

    Full Text Available The purpose of this article is the description of an author’s technique of an assessment of competitiveness of the enterprises of the furniture industry which mainobjective is the economic assessment ofproduction efficiency of production of thefurniture enterprise, an assessment ofthe intra firm making production efficiencyof furniture, identification of the factors influencing overall performance of thefurniture enterprise.

  11. Anthropometric evaluation and recommendation for primary schools classroom furniture design in Perlis

    Science.gov (United States)

    Shan, Lim Shaiu; Jing, Ewe Hui; Effendi, M. S. M.; Rosli, Muhamad Farizuan

    2017-09-01

    This study was carried out with the objective to obtain the anthropometric data of primary school children from Year 1 to Year 6 and evaluate the children's anthropometry with the current dimensions of classroom furniture (i.e. chair and table). In addition, this study also proposed the design dimensions for the improvement in classroom furniture design with the consideration of children's anthropometric data. A total of 390 children selected from 13 primary schools in Perlis, Malaysia were participated in this study. There were 11 anthropometric measurements of children have been measured in this study, which include stature (St), popliteal height (PH), knee height (KH), thigh thickness (TT), buttock popliteal length (BPL), hip breadth (HB), sitting shoulder height (SSH), sitting elbow height (SEH), forearm-hand length (FHL), height of lumbar point (HLP) and buttock clearance (BC). Besides that, 7 dimensions relating to current classroom chair have been measured, such as seat height (SH), seat depth (SD), seat width (SW), upper edge of backrest (UEB), lower edge of backrest (LEB), S point (SP), overall chair height (OCH). Another 5 dimensions of the existing classroom table have been measured too, which involve table height (TH), table depth (TD), table width (TW), under table height (UH) and seat to table clearance (STC). All the measurements were performed by using metal measuring tape. The anthropometric data of the children were analyzed with the help of Microsoft Excel 2013. Several equations with associated with the anthropometric data and furniture dimensions have been applied in this research. The new design dimensions for classroom furniture that proposed in this paper which based on the collected anthropometric data can be referred as a guideline for classroom furniture design. The implementation of these data may help to create comfortability, safety, suitability and improve performance of children in the classroom.

  12. Ikea success in chinese furniture

    OpenAIRE

    Yihong, Li

    2007-01-01

    This thesis will focus on the market exploiting and development of IKEA in China, analysis the characteristics of Chinese market and the supply-demand of the IKEA products in China. It also analyze the main Chinese consumers’ behaviour and evaluating the furniture retail market in China. IKEA is a successful case to open the china market recent years. The main goal is to acquire this information in order to provide the overseas retailers with a good starting point for creating an effective bu...

  13. Changes and development of product line : Case: P. Rotola-Pukkila Oy's products, furniture trends and competitors

    OpenAIRE

    Rotola-Pukkila, Ida

    2016-01-01

    The purpose of this thesis is to study what kinds of changes and developments have been done in furniture manufacturer P. Rotola-Pukkila Oy’s Timantti and Laatupaneeli products and colour options between the years 1970−2016. Another objective is to study the trends on furniture and interior design field, as well as to study how the company’s products compete on the market. Concepts related to company’s history, products, collections and colour options as well as the history of furniture f...

  14. Mr Drage, Mr Everyman, and the creation of a mass market for domestic furniture in interwar Britain

    OpenAIRE

    Peter Scott

    2007-01-01

    This paper examines strategies used by durable goods retailers to create a mass market in interwar Britain, via a case-study of domestic furniture. Interwar demand for new furniture witnessed particularly rapid growth - mainly owing to the extension of the market to lower-income groups. A number of innovative national retailers eveloped liberal HP facilities to bring furniture within the economic reach of these groups, while sophisticated national advertising campaigns were used to both legit...

  15. Avaliação de resíduos de painéis de madeira gerados por indústrias moveleiras para aproveitamento na confecção de pequenos objetos: estudo de caso Evaluation of residues of wood boards generated by furniture industries for their utilization in the production of small objects: study of case

    Directory of Open Access Journals (Sweden)

    Luciana Barbosa de Abreu

    2009-01-01

    Full Text Available A indústria moveleira produz uma quantidade de resíduos que, normalmente, é descartada no meio ambiente ou utilizada como combustível em caldeiras e similares, ou apenas queimada. Alternativas para utilização desses resíduos têm sido alvo de pesquisas, destacando-se a confecção de pequenos objetos, na forma de artesanato. Neste trabalho, objetivou-se avaliar os resíduos de indústrias do pólo moveleiro de Ubá/MG. No levantamento quantitativo, constatou-se que as empresas geraram resíduos dos mesmos tipos de painéis de madeira. Os resíduos mais comuns foram de aglomerado e MDF (Medium Density Fiber. Observou-se grande variabilidade das dimensões desses resíduos, principalmente em sua largura. Concluiu-se que alguns resíduos não apresentaram dimensões adequadas para a confecção de determinados objetos e que se torna necessária uma seleção prévia desses resíduos para direcioná-los a trabalhos mais minuciosos, de forma a viabilizar a sua utilização.The furniture industry generates an amount of residues, which, normally, is discarded in the environment or destined to steam production in boilers. The handmade production of small wood board objects is an outstanding alternative to take advantage of these residues. The general aim of this study was to evaluate residues in furniture industries located at the pole of Ubá/MG. Through the survey and the analysis of the data, one established that the industries generate residues from the same kind of wood board. The most common residues were of particleboard and MDF (Medium Density Fiber. One observed a great diversity of residue dimensions, mainly in width. One concluded that some residues did not present adequate dimensions for the manufacturing of some objects and that there is a necessity of previous residues selection, in order to destine them to more detailed works and make possible their use.

  16. 75 FR 44764 - Wooden Bedroom Furniture from the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2010-07-29

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  17. Characterization of wood dust from furniture by scanning electron microscopy and energy-dispersive x-ray analysis.

    Science.gov (United States)

    Gómez Yepes, Milena Elizabeth; Cremades, Lázaro V

    2011-01-01

    Study characterized and analyzed form factor, elementary composition and particle size of wood dust, in order to understand its harmful health effects on carpenters in Quindío (Colombia). Once particle characteristics (size distributions, aerodynamic equivalent diameter (D(α)), elemental composition and shape factors) were analyzed, particles were then characterized via scanning electron microscopy (SEM) in conjunction with energy dispersive X-ray analysis (EDXRA). SEM analysis of particulate matter showed: 1) cone-shaped particle ranged from 2.09 to 48.79 µm D(α); 2) rectangular prism-shaped particle from 2.47 to 72.9 µm D(α); 3) cylindrically-shaped particle from 2.5 to 48.79 µm D(α); and 4) spherically-shaped particle from 2.61 to 51.93 µm D(α). EDXRA reveals presence of chemical elements from paints and varnishes such as Ca, K, Na and Cr. SEM/EDXRA contributes in a significant manner to the morphological characterization of wood dust. It is obvious that the type of particles sampled is a complex function of shapes and sizes of particles. Thus, it is important to investigate the influence of particles characteristics, morphology, shapes and D(α) that may affect the health of carpenters in Quindío.

  18. 77 FR 51754 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2012-08-27

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  19. Technical Guide for conservation of wood fuel: Experiences from Sahel

    International Nuclear Information System (INIS)

    Jorez, J.P.

    1992-03-01

    The guide gives technical information in design of energy efficient cooking stoves for the wood depleted countries in sub-saharan Africa. Knowledge and experiences of the Sahel region have been used to design the stoves discussed. As an introduction, the causes and consequences of the wood fuel crises are reviewed. The main models of improved stoves that are spread in Sahel are then described, together with data on performance and design considerations. Strategies for distribution of the improved stoves are analyzed, and ways to follow-up and evaluate their use are suggested. Results of campaigns to distribute the stoves in West African countries are given and methods to improve the distribution are proposed, in particular to promote the ceramic stoves. Finally, complementary wood fuel conservation campaigns are suggested for activities other than household cooking. 22 refs, 14 figs, 5 tabs and photos

  20. 75 FR 82373 - Wooden Bedroom Furniture From the People's Republic of China: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2010-12-30

    ..., filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  1. 76 FR 49729 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2011-08-11

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  2. 76 FR 68138 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of the 2010...

    Science.gov (United States)

    2011-11-03

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  3. 75 FR 19364 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Expedited Sunset...

    Science.gov (United States)

    2010-04-14

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

  4. The structural analysis of small and medium size furniture ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-17

    Dec 17, 2008 ... furniture enterprises in Turkey based on production, capacity use and .... has important structural, organizational and technological deficiencies, but it has .... the equipment they need change in compliance with the order they ...

  5. What Next for Wood Construction/Demolition Debris?

    OpenAIRE

    Martin A. Hubbe

    2014-01-01

    Residents in localities throughout the world voluntarily participate in the routine recycling of household wastes, such as paper, metals, and plastics containers. But when a house in their neighborhood gets built or torn down, most of the debris – including wood waste – gets landfilled. Such a waste of material suggests that there are opportunities to add value to these under-utilized resources. The great variability, as well as contamination, pose major challenges. It is recommended that rec...

  6. Experimental Investigation of Moisture Driven Fracture in Solid Wood

    DEFF Research Database (Denmark)

    Larsen, Finn; Ormarsson, Sigurdur; Olesen, John Forbes

    2010-01-01

    Solid timber products, containing both heartwood and sapwood, often have a high tendency to crack during the drying process. This can cause severe loss of material for the saw-mills, especially for products with large cross sectional dimensions. The cracks (e.g. end-cracks) arise, in some cases......, early in the drying process and close again later in the process. It can be difficult to see the closed cracks with visual grading. This may result in too high grading of the damaged material which may cause problems for customers such as building and furniture industries. Moisture content (MC) in green...... wood varies within the cross section of a timber log. The MC of heartwood, for example, is considerable lower than the MC of sapwood. Shrinkage starts at different times within different parts of the cross section, which results in a complex state of strains and stresses. The moisture related crack...

  7. Importance of Logistics Processes for Customer Service and Firm Performance: Evidence from Furniture Industry of Pakistan

    Directory of Open Access Journals (Sweden)

    Imran Qadir

    2017-11-01

    Full Text Available Research Question: This study examines the relationship between logistics processes, customer service and firm performance in the furniture industry of Pakistan. Motivation: Furniture industry in Pakistan comprises small and medium enterprises wherein production is mainly labor intensive. Therefore, the current study also investigates the mediating role of manufacturing flexibility for the relationship of logistics processes and customer service. The paper applies the logistics models developed by Bowesox (1974, Green et al.(2008, and Tracey (1998 to furniture industry. Idea: The core idea of the paper is to measure the effects of logistics process on customer service and the performance of furniture manufacturing firms. The study takes the logistics process as an independent variable, the customer service as the first dependent variable and manufacturing performance as a moderating variable. Data: Primary data on logistics, customer service, manufacturing flexibility and firm performance were conveniently collected through a questionnaire from owners/managers of 61 furniture manufacturing firms. Tool: Descriptive statistics, correlation and regression analyses were run to draw the results. Findings: Logistics processes positively affect customer service and firm performance. Customer service also exerts a positive effect on firm performance while the moderating role of manufacturing flexibility was not supported for the relationship of logistics processes and customer service. Contribution: Through efficiency in logistics processes, furniture manufacturing firms can serve customers in a superior way to ultimately achieve improved firm performance. The framework being restricted to efficiency of logistics processes only constitutes an important limitation of the study.

  8. Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications.

    Science.gov (United States)

    Zhu, Hongli; Luo, Wei; Ciesielski, Peter N; Fang, Zhiqiang; Zhu, J Y; Henriksson, Gunnar; Himmel, Michael E; Hu, Liangbing

    2016-08-24

    With the arising of global climate change and resource shortage, in recent years, increased attention has been paid to environmentally friendly materials. Trees are sustainable and renewable materials, which give us shelter and oxygen and remove carbon dioxide from the atmosphere. Trees are a primary resource that human society depends upon every day, for example, homes, heating, furniture, and aircraft. Wood from trees gives us paper, cardboard, and medical supplies, thus impacting our homes, school, work, and play. All of the above-mentioned applications have been well developed over the past thousands of years. However, trees and wood have much more to offer us as advanced materials, impacting emerging high-tech fields, such as bioengineering, flexible electronics, and clean energy. Wood naturally has a hierarchical structure, composed of well-oriented microfibers and tracheids for water, ion, and oxygen transportation during metabolism. At higher magnification, the walls of fiber cells have an interesting morphology-a distinctly mesoporous structure. Moreover, the walls of fiber cells are composed of thousands of fibers (or macrofibrils) oriented in a similar angle. Nanofibrils and nanocrystals can be further liberated from macrofibrils by mechanical, chemical, and enzymatic methods. The obtained nanocellulose has unique optical, mechanical, and barrier properties and is an excellent candidate for chemical modification and reconfiguration. Wood is naturally a composite material, comprised of cellulose, hemicellulose, and lignin. Wood is sustainable, earth abundant, strong, biodegradable, biocompatible, and chemically accessible for modification; more importantly, multiscale natural fibers from wood have unique optical properties applicable to different kinds of optoelectronics and photonic devices. Today, the materials derived from wood are ready to be explored for applications in new technology areas, such as electronics, biomedical devices, and energy. The

  9. Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Hongli; Luo, Wei; Ciesielski, Peter N.; Fang, Zhiqiang; Zhu, J. Y.; Henriksson, Gunnar; Himmel, Michael E.; Hu, Liangbing

    2016-08-24

    With the arising of global climate change and resource shortage, in recent years, increased attention has been paid to environmentally friendly materials. Trees are sustainable and renewable materials, which give us shelter and oxygen and remove carbon dioxide from the atmosphere. Trees are a primary resource that human society depends upon every day, for example, homes, heating, furniture, and aircraft. Wood from trees gives us paper, cardboard, and medical supplies, thus impacting our homes, school, work, and play. All of the above-mentioned applications have been well developed over the past thousands of years. However, trees and wood have much more to offer us as advanced materials, impacting emerging high-tech fields, such as bioengineering, flexible electronics, and clean energy. Wood naturally has a hierarchical structure, composed of well-oriented microfibers and tracheids for water, ion, and oxygen transportation during metabolism. At higher magnification, the walls of fiber cells have an interesting morphology--a distinctly mesoporous structure. Moreover, the walls of fiber cells are composed of thousands of fibers (or macrofibrils) oriented in a similar angle. Nanofibrils and nanocrystals can be further liberated from macrofibrils by mechanical, chemical, and enzymatic methods. The obtained nanocellulose has unique optical, mechanical, and barrier properties and is an excellent candidate for chemical modification and reconfiguration. Wood is naturally a composite material, comprised of cellulose, hemicellulose, and lignin. Wood is sustainable, earth abundant, strong, biodegradable, biocompatible, and chemically accessible for modification; more importantly, multiscale natural fibers from wood have unique optical properties applicable to different kinds of optoelectronics and photonic devices. Today, the materials derived from wood are ready to be explored for applications in new technology areas, such as electronics, biomedical devices, and energy. The

  10. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its char...

  11. How clustering dynamics influence lumber utilization patterns in the Amish-based furniture industry in Ohio

    Science.gov (United States)

    Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

    2011-01-01

    Preliminary studies have suggested that the Amish-based furniture and related products manufacturing cluster located in and around Holmes County, Ohio, uses sizeable quantities of hardwood lumber. The number of firms within the cluster has grown even as the broader domestic furniture manufacturing sector has contracted. The present study was undertaken in 2008 (spring/...

  12. Aspects of the furniture industry in Ireland

    OpenAIRE

    Heanue, Kevin

    2009-01-01

    This dissertation examines aspects of networking, industrial organisation, innovation, and industrial agglomeration in the Irish furniture manufacturing industry. With its focus on firm behaviour, industrial organisation and industrial structure the research is located within the tradition of industrial economics. Based on heterodox economic perspectives and utilising a variety of methods (albeit principally case study based), the dissertation provides new theoretical and empirical knowle...

  13. Ergonomic suitability of kitchen furniture regarding height accessibility.

    Science.gov (United States)

    Hrovatin, Jasna; Prekrat, Silvana; Oblak, Leon; Ravnik, David

    2015-03-01

    It is possible to significantly ease kitchen chores with properly sized and appropriately arranged cupboards. In designing kitchen furniture and the optimal depth and the height of storage capacities, accessibility should be taken into consideration. It is known that the optimal storage zone is between 800 and 1100 mm and that there is reduced visibility and accessibility at the level between 1400 and 1700 mm, which is even more prominent for the elderly. This suggests that wall cabinets are not recommended for the elderly. The aim of this study was to determine to what extent kitchens manufactured by Slovenian furniture manufacturers are suitable for users of different age groups with regard to the accessibility of goods stored in the cupboards. Furthermore, based on the measurement analysis, recommendations are provided for designing kitchen furniture that would meet the needs of the elderly. The study, carried out using a computer simulation model, analyzed the products of three Slovenian kitchen manufacturers. The cross section of accessibility in the wall cabinets was determined for different age groups of men and women. The results show that the efficacy of the volume in wall cabinets higher than 600 mm, in comparison to places where objects are easily reachable, is 30% lower for women, thus indicating the inefficiency of storage space in wall cabinets. In terms of accessibility, existing kitchens are not optimal for the elderly, and a model with a deeper worktop and wall cabinets lowered onto the worktop is proposed. Accessibility in such wall cabinets is increased by up to 70% if the body is moved forward by 30°.

  14. Energy from wood biomass: The experience of the Brazilian forest sector

    Energy Technology Data Exchange (ETDEWEB)

    Couto, L. [Universidade Federal de Vicosa (Brazil); Graca, L.R. [Centro Nacional de Pesquisa de Floresta, Colombo (Brazil); Betters, D.R. [Colorado State Univ., Fort Collins, CO (United States)

    1993-12-31

    Wood biomass is one of the most significant renewable sources of energy in Brazil. Fuelwood and charcoal play a very important role not only for household energy consumption but also for the cement, iron and steel industries. Wood is used as an energy source by the pulp and paper, composite board and other industries of the country, mainly for steam and electricity generation. Ethanol, lignin-based coke and methanol from wood were produced at experimental units in Brazil but were not implemented on a commercial scale. Currently, a new experimental plant using a technology developed in the US is being built in the state of Bahia to generate electricity from Eucalyptus. This technology is a Biomass Integrated Gasification/Gas Turbine process which is expected to make the use of wood biomass economically feasible for electricity generation. Forest plantations are the main source of wood biomass for energy consumption by the Brazilian industrial sector. Fiscal incentives in the 1960s helped the country to begin a massive reforestation program mainly using Eucalyptus and Pinus species. A native species, bracatinga (Mimosa scabrella) has also been used extensively for wood energy plantations in southern Brazil. Technical, economic, social and environmental impacts of these plantation forests are discussed along with a forecast of the future wood energy utilization in Brazil.

  15. 78 FR 60844 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2013-10-02

    ... Furniture Co., Ltd. Dorbest Ltd., Rui Feng Woodwork Co., Ltd. Aka Rui Feng Woodwork (Dongguan) Co., Ltd., Rui Feng Lumber Development Co., Ltd. Aka Rui Feng Lumber Development (Shenzhen) Co., Ltd., Fine... Fung Wooden Factory, Sun Fung Co., Shin Feng Furniture Co., Ltd., Stupendous International Co., Ltd...

  16. Commercial activities and subsistence utilization of mangrove forests around the Wouri estuary and the Douala-Edea reserve (Cameroon

    Directory of Open Access Journals (Sweden)

    Dahdouh-Guebas Farid

    2009-11-01

    Full Text Available Abstract Background Worldwide there is growing research interest in the ethnobiology of mangrove forests. Notwithstanding that, little information has been published about ethnobiology of mangrove forests in Cameroon. The aims of this study were a to analyze the harvesting methods and the local selling of mangrove wood products by loggers in the vicinity of Wouri estuary and b to investigate the patterns of subsistence uses of mangrove wood products around the Douala-Edea reserve. Methods Semi-structured interviews were conducted with 120 active mangrove loggers in 23 Douala wood markets and 103 households located in three villages (Mbiako, Yoyo I and Yoyo II close to Douala-Edea reserve. In each of the three densely populated villages, every second household was chosen for sampling while in all markets, mangrove loggers were chosen randomly. In addition, log diameters were measured in each market using a wooden foldable tape measure. A post hoc analysis (Newman-Keuls test was performed in order to detect the common wood class diameter sold in the Douala wood markets. Results The analysis of the loggers' survey data has shown that large logs of Rhizophora with diameter greater than 40 cm were common in the Douala wood markets and were more closely associated with loggers who used chainsaws. In addition to the general mangroves wood products selling, the analysis on a subsistence level (households' survey suggests the local population's dependence on mangroves, with multiple uses of Rhizophora racemosa Meyer, R. harrisonii Leechman, Avicennia germinans L. Stearn., Laguncularia racemosa Gaertn. f. and Conocarpus erectus L. timbers for furniture, fences, smoking fish, and fuelwood. Finally, Nypa fruticans (Thunb. Wurmb. leaves were used as thatching material for house walls and roofs. Conclusion Our findings revealed that big logs of Rhizophora were commonly sold by the loggers. A majority of loggers (60% reported that mangrove marketed wood

  17. Commercial activities and subsistence utilization of mangrove forests around the Wouri estuary and the Douala-Edea reserve (Cameroon).

    Science.gov (United States)

    Atheull, Adolphe Nfotabong; Din, Ndongo; Longonje, Simon N; Koedam, Nico; Dahdouh-Guebas, Farid

    2009-11-17

    Worldwide there is growing research interest in the ethnobiology of mangrove forests. Notwithstanding that, little information has been published about ethnobiology of mangrove forests in Cameroon. The aims of this study were a) to analyze the harvesting methods and the local selling of mangrove wood products by loggers in the vicinity of Wouri estuary and b) to investigate the patterns of subsistence uses of mangrove wood products around the Douala-Edea reserve. Semi-structured interviews were conducted with 120 active mangrove loggers in 23 Douala wood markets and 103 households located in three villages (Mbiako, Yoyo I and Yoyo II) close to Douala-Edea reserve. In each of the three densely populated villages, every second household was chosen for sampling while in all markets, mangrove loggers were chosen randomly. In addition, log diameters were measured in each market using a wooden foldable tape measure. A post hoc analysis (Newman-Keuls test) was performed in order to detect the common wood class diameter sold in the Douala wood markets. The analysis of the loggers' survey data has shown that large logs of Rhizophora with diameter greater than 40 cm were common in the Douala wood markets and were more closely associated with loggers who used chainsaws. In addition to the general mangroves wood products selling, the analysis on a subsistence level (households' survey) suggests the local population's dependence on mangroves, with multiple uses of Rhizophora racemosa Meyer, R. harrisonii Leechman, Avicennia germinans L. Stearn., Laguncularia racemosa Gaertn. f. and Conocarpus erectus L. timbers for furniture, fences, smoking fish, and fuelwood. Finally, Nypa fruticans (Thunb.) Wurmb. leaves were used as thatching material for house walls and roofs. Our findings revealed that big logs of Rhizophora were commonly sold by the loggers. A majority of loggers (60%) reported that mangrove marketed wood constitute a principal source of income. Most of the villagers (85

  18. Does Saudi school furniture meet ergonomics requirements?

    Science.gov (United States)

    Ramadan, Mohamed Zaki

    2011-01-01

    The goal of this research was to study the effect of adjustable imported desk and chair combinations available in the market on student performance. Six sets of chairs and tables within three different activities (reading, writing, and looking to the blackboard) were the independent variables. Evaluation of back force at 5th lumbar vertebrae and the 1st sacrum (L5/S1), subjective measures of discomfort, and the mismatch between student body dimension and classroom furniture analysis were measured. A total of 124 young male students (first through sixth-grade) participated in this experiment. The results revealed too low or too high chair and table heights relative to the students' body dimensions increased the stresses acting at L5/S1 as well as discomfort ratings. This study indicated there was a high level of body mismatch in desk-chair combinations even with the adjustable imported furniture available in the local market. Anthropometric data of Saudi students should be collected from different regions in the Kingdom and then design and development of desk-chair combinations could follow the development of a standard procedure to adapt to the needs of Saudi school children.

  19. National Wood-fuel Programme 2000-2006. Activity Report 2000-2006

    International Nuclear Information System (INIS)

    2008-01-01

    When ADEME launched its Wood-fuel programme throughout all of France in late 1999, its aim was to guide this resource supply chain to maturity and stable development in all user sectors: domestic, multi-family housing, commercial/institutional and industrial applications. To this end the Wood-fuel Programme 2000-2006 was assigned objectives and endowed with significant financial means for studies and coordination in order to support and carry out general-interest projects, piloted by ADEME. The stated goal was to replace fossil fuels, avoid carbon emissions and establish quality assurance standards for household firewood and wood-fired devices. This report presents: 1 - the Wood Energy stakes for the environment, for employment, and for the economy, the biomass energy net benefits; 2 - the Wood Energy key figures: Production and consumption, Single-family homes and wood heating, Breakdown of types of devices used, Sales of wood-fired devices, Number of housing/institutional boilers in use, Number of industrial boilers in use; 3 - the Wood Energy objectives: Domestic heating, Industrial boiler plants, District heating for housing/institutional/commercial uses; 4 - the Wood Energy program operation: Program coordination by ADEME, Partnerships and State-Region planning agreements, 2000-2006 funding system (modified in 2004) and Other financial instruments; 5 - the 2000-2006 assessment: Main results, Conclusions and recommendations, Evaluation contributions: five key points, Evaluation of employment in the solid biofuels supply chain, Supply for community, institutional and commercial boilers; 6 - Information and communication: Initiatives supported or accompanied by ADEME between 2000 and 2004, Publications supported by ADEME. In appendix: fuels and energy content, regional assessments, national research program on bio-energies - PNRB 2006 (Review and stakes, PNRB results in 2006), wood heating R and D, studies funded by ADEME, 2006 ADEME's correspondents, glossary

  20. Estimation of main greenhouse gases emission from household energy consumption in the West Bank, Palestine

    International Nuclear Information System (INIS)

    Abu-Madi, Maher; Rayyan, Ma'moun Abu

    2013-01-01

    The main GHGs (CO 2 , NO x , and SO 2 ) have been quantified based on national energy and population statistics. The results show that the contribution of households' energy consumption in the West Bank to global CO 2 emission is about 0.016%, while contribution of total energy consumption by all sectors is about 0.041%. The results show that wood is the most polluting energy source in terms of CO 2 and NO x emission, while electricity is the most polluting source in terms of SO 2 . Other sources like diesel, kerosene, and LPG that contribute to the GHGs emission are also quantified. The total amounts of CO 2 , NO x , and SO 2 by households in the West Bank are 4.7 million tonne per year, 3.02 thousand tonne per year, and 2.23 thousand tonne per year respectively. This study presents a set of measures that might help in reducing the level of GHGs emission and protect the environment. -- Highlights: •We quantified the CO 2 , NO x , and SO 2 based on national statistics. •Wood is the most polluting in terms of CO 2 and NO x emission. •Electricity is the most polluting in terms of SO 2 emission. •Households' energy consumption contributes with 0.016% to global CO 2 emission. •We present key measures to reduce GHGs emission and protect the environment. -- The most polluting energy sources that produce most of the CO 2 and SO 2 emissions in the West Bank are wood and electricity

  1. 76 FR 57713 - Wooden Bedroom Furniture From the People's Republic of China: Amended Final Results of...

    Science.gov (United States)

    2011-09-16

    ... appearance on behalf of Liberty Furniture Industries Inc. (``Liberty'') on August 17, 2011. The law firm also... Department: (1) Left out the word ``Dongguan'' when it listed the entity ``Dongguan Cambridge Furniture Co., Ltd., Glory Oceanic Co., Ltd.'' (``Cambridge'') in the rate table of the Final Results; (2) did not...

  2. Development of Modular Outdoor Furniture Product Using Lightweight Concrete for Public Parks in Surabaya

    Science.gov (United States)

    Mulyono, Grace; Thamrin, Diana; Antoni

    2017-09-01

    The development of public parks into green city facilities in Surabaya has triggered the need of outdoor furniture designs that can resist the tropical wet and dry weather conditions while also having a certain mobility to support flexible park arrangement. However, present furniture designs made of concrete material are generally heavy and immovable. Flexible designs are needed for various activities that can take place at the same time such as sitting and playing, and to support changes in arrangement to keep the green open spaces attractive from time to time. This research develops the idea of a modular outdoor furniture design using cellular lightweight concrete (CLC) as the main material as a result from observing its resistance towards weather change and its relative light weight. It starts with analysis of problems, formulation of design concept, creation of design alternatives, selection of design, calculation of mouldings, adaptation of design to the mouldings and production of a scaled mock-up using CLC. Findings of this research reveal that the modular design along with the CLC material used not only support the flexibility of change in function and arrangement but also make these furniture resistant to the hot and humid weather of Surabaya.

  3. A producer survey on Turkish furniture industry

    OpenAIRE

    Öğün, Emir Polat

    1996-01-01

    Ankara : The Department of Management and Graduate School of Business Administration of Bilkent Univ., 1996. Thesis (Master's) -- Bilkent University, 1996. Includes bibliographical references leaves 79-80. Turkish furniture industry has been growing steadily since the liberalization of Turkish economy in early 1980’s. However, the industry faces some technological and economical problems which affects the competitiveness of the firms in the global market. The major problems ...

  4. Use of design as competitive advantage in the furniture industry at Santa Maria/RS

    Directory of Open Access Journals (Sweden)

    Leoni Pentiado Godoy

    2012-08-01

    Full Text Available This article shows the contribution of innovative and proactive professional design to increase the competitiveness of the supply chain sector. Thus, the question that motivates the study were: how the design as a strategy, aligned to quality, can act as a competitive to micro and small enterprise in the furniture sector? The study conducted individual interviews with furniture industry managers and used questionnaires to furniture consumers in Santa Maria, located in the center of Rio Grande do Sul State. The research has shown that the search for mechanisms that create competition between companies is increasingly intense and the race for innovative methods to achieve efficiency has great importance. The design adds value to product in terms of aesthetics, ergonomics, comfort and functionality, besides being a very important element in the rationalization of production

  5. Significance of wood extractives for wood bonding.

    Science.gov (United States)

    Roffael, Edmone

    2016-02-01

    Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

  6. Bending stress modeling of dismountable furniture joints applied with a use of finite element method

    Directory of Open Access Journals (Sweden)

    Milan Šimek

    2009-01-01

    Full Text Available Presented work focuses on bending moment stress modeling of dismountable furniture joints with a use of Finite Element Method. The joints are created from Minifix and Rondorfix cams combined with non-glued wooden dowels. Laminated particleboard 18 mm of thickness is used as a connected material. The connectors were chosen such as the most applied kind in furniture industry for the case furniture. All gained results were reciprocally compared to each other and also in comparison to experimental testing by the mean of stiffness. The non-linear numerical model of chosen joints was successfully created using the software Ansys Workbench. The detailed analysis of stress distribution in the joint was achieved with non-linear numerical simulation. A relationship between numerical si­mu­la­tion and experimental testing was showed by comparison stiffness tangents. A numerical simulation of RTA joint loads also demonstrated the important role of non-glued dowels in the tested joints. The low strength of particleboard in the tension parallel to surface (internal bond is the most likely the cause of the joint failure. Results are applicable for strength designing of furniture with the aid of Computer Aided Engineering.

  7. The millennium development goals and household energy requirements in Nigeria.

    Science.gov (United States)

    Ibitoye, Francis I

    2013-01-01

    Access to clean and affordable energy is critical for the realization of the United Nations' Millennium Development Goals, or MDGs. In many developing countries, a large proportion of household energy requirements is met by use of non-commercial fuels such as wood, animal dung, crop residues, etc., and the associated health and environmental hazards of these are well documented. In this work, a scenario analysis of energy requirements in Nigeria's households is carried out to compare estimates between 2005 and 2020 under a reference scenario, with estimates under the assumption that Nigeria will meet the millennium goals. Requirements for energy under the MDG scenario are measured by the impacts on energy use, of a reduction by half, in 2015, (a) the number of household without access to electricity for basic services, (b) the number of households without access to modern energy carriers for cooking, and (c) the number of families living in one-room households in Nigeria's overcrowded urban slums. For these to be achieved, household electricity consumption would increase by about 41% over the study period, while the use of modern fuels would more than double. This migration to the use of modern fuels for cooking results in a reduction in the overall fuelwood consumption, from 5 GJ/capita in 2005, to 2.9 GJ/capita in 2015.

  8. Effect of epoxy resin on bending momentum in L type corner joins

    Directory of Open Access Journals (Sweden)

    Mehmet Nuri Yıldırım

    2017-11-01

    Full Text Available In the furniture industry, the joining points of frame and box construction furniture according to the loads to be affected by the use place is important for the security of the user and service life of the furniture element. In this direction, it is aimed to determine the diagonal compression and diagonal tensile moment values of "L" type corner joints of box framed construction furniture prepared from solid wood materials. The Pinus Nigra, Fagus Orientalis L and Populus Nigra were used as solid wood materials. Wood-based biscuit joining elements were used in corner joints of the test construction and epoxy resin was used as glue for materials. The static loads were applied to construction according to ASTM-D1037. The results show that, the highest tensile and compression values were obtained from Fagus Orientalis L and the lowest values were obtained from Populus Nigra specimens. In the statistical study, the difference between the tensile and compressive bending moment values of the biscuit connection element was found to be statistically significant. This study indicates that, it is suggested to use of L type joints prepared from Fagus Orientalis L by using epoxy resin and wood based biscuit joining element in frame constructions.

  9. Household reporting of childhood respiratory health and air pollution in rural Alaska Native communities.

    Science.gov (United States)

    Ware, Desirae N; Lewis, Johnnye; Hopkins, Scarlett; Boyer, Bert; Montrose, Luke; Noonan, Curtis W; Semmens, Erin O; Ward, Tony J

    2014-01-01

    Air pollution is an important contributor to respiratory disease in children. To examine associations between household reporting of childhood respiratory conditions and household characteristics related to air pollution in Alaska Native communities. In-home surveys were administered in 2 rural regions of Alaska. The 12-month prevalence of respiratory conditions was summarized by region and age. Odds ratios (ORs) were calculated to describe associations between respiratory health and household and air quality characteristics. Household-reported respiratory health data were collected for 561 children in 328 households. In 1 region, 33.6% of children aged respiratory infections in children (ORs 1.6-2.5), while reported wheezing was associated with 1 or more smokers living in the household. Reported asthma in 1 region (7.6%) was lower than national prevalence estimates. Findings suggest that there may be preventable exposures, including wood smoke and mould that affect childhood respiratory disease in these rural areas. Additional research is needed to quantify particulate matter 2.5 microns in aerodynamic diameter or less and mould exposures in these communities, and to objectively evaluate childhood respiratory health.

  10. Marketing Strategy Analysis for Small and Medium Scale Business Enterprise (SMEs) for Home Industry Furniture in Leilem, the Regency of Minahasa

    Science.gov (United States)

    Pangemanan, S. A.; Walukow, I. M.

    2018-01-01

    Leilem is a small village located in Minahasa Regency. This village is well known for furniture products made of Timber. Eventhough the village has been producing various furniture products with high quality since many decades ago, it has not been able to compete with other new entries such furniture from Java, Synthetic Ratan, Plywood and plastic based furniture. The monotonous design and the finishing works done on the furniture have been some of the major issues in the decline of home furniture. The research explores problems and challenges faced by the furniture home Industry. It will also aim at identifying the internal and external factors that prevent the home industry to compete and survive. In the end the research will develop the strategic positioning of the home industry in the midst of competition. The research methodology employs descriptive analysis in which data are collected through observation, interview, and questionnaire. This methodology is combined with IFE (Internal Factor Evaluation) and EFE (External Factor Evaluation) Matrix, SPACE Matrix and SWOT Analysis and QSPM (Quantitative Strategic Planning Matrix). The sample is 66 business people, of 823 craftsmen who are working in this business. The result shows this home industry is very competitive in terms of consistency, but in terms of promotion, product quality, price, product diversification, design training of furniture, management and economic scale, it is lagging behind. The home industry should be able to develop marketing networking, improve design and product quality, promotion and cost control, product diversification and these can only be done by intensive training in managing business and investment.

  11. DEVELOPMENT OF WOOD-BASED PRODUCTS WORLDWIDE

    Directory of Open Access Journals (Sweden)

    Marius C. BARBU

    2015-12-01

    Full Text Available The tendency in recent decades for manufacturing plants of semi-finished products such as composite panels, has been to invest in order to achieve high production capacities (>2,000 m³/day for panels and >3,000 t/day for paper with one line. The trend of concentrating the primary processing capacities and manufacturing wood-based panels will continue for the next few years not only in Europe but in North and South America as well. The ten largest panel manufacturers had a combined manufacturing capacity that exceeded a third of the worldwide production capacity. The financial crisis that started in 2008 has caused the closure of a large number of factories especially in North America and Central Europe. Small- and medium-sized producers will only survive if they will continue to specialize in the manufacture of panel types and sizes (niche products that are “unprofitable” for mega-groups. The installed production capacity worldwide of all wood-based composite panels combined (includes PY, PB, MDF, OSB rose by more than 2.5 times between 1980 and 2005 (225 mil.m³, and continues to increase despite the crises reaching approx. 300 mil.m³ in 2013. The forecast for the coming years varies greatly from continent to continent. In North America and Central Europe, both a consolidation of the available production capacities and the closure of less efficient older lines are expected. The lowest point of the effect of the financial crisis on the building industry seems to have been overcome. The furniture production companies will continue to move from one continent and region to another.

  12. Realization of FRC interior and exterior furniture

    Science.gov (United States)

    Šonka, Š.; Frantová, M.; Štemberk, P.; Havrda, J.; Janouch, P.

    2017-09-01

    This article deals with the implementation of fibre reinforced concrete for interior and exterior furniture. The use of fibre reinforced concrete for non-traditional and small structures brings some specifics in design and realization. These are, in particular, the design of a suitable mixture, the choice of the shape of the structure in relation to the technological possibilities of realization, the static effects and finally the actual production of the element.

  13. [Environmental and health impacts of wood combustion to produce heat and power].

    Science.gov (United States)

    Valerio, Federico

    2012-01-01

    Toxic chemicals such as benzene, polycyclic aromatic hydrocarbons, dioxins, and ultra fine particles were found in the smoke produced by wood combustion. Emission factors confirm that, to produce the same energy amount, many more pollutants are emitted by wood than by natural gas. Biomass burning produces a relevant deterioration of air quality inside and outside houses, notably due to emissions of fine and ultra fine dust (PM10, PM2.5) according to reviewed studies. Important improvements in emission quality are obtained with the use of more efficient household heating systems, both in developed and in developing countries. Numerous studies have assessed the possible health effects produced by wood smoke, providing sufficient evidence that the indoor exposure to wood smoke, even in developed countries, can have adverse effects on human health. In 2010 IARC classified wood smoke as a possible human carcinogen. In Europe, electricity generation from biomass combustion is increasing (12% each year) thanks to incentives provided to reduce greenhouse gas emissions and use of fossil fuels.Today adequate studies to assess the environmental and health effects of emissions from power plants fuelled by solid biomasses are still needed.

  14. Analisis Praktik Corporate Social Responsibility Perusahaan Furniture di Kabupaten Jepara

    Directory of Open Access Journals (Sweden)

    Aida Nahar

    2015-12-01

    Full Text Available Corporate social responsibility (CSR is a transparent business practices, which are based on ethical values, with particular attention to employees, communities and the environment, and designed to meet the wishes of the shareholders and the public in general. Effort to understand and analyze the practice of CSR in a company is interesting, considering the practice of CSR is not a uniform practice and its implementation is highly dependent on the unique characteristics inherent in the company. The purpose of this study is to investigate to find out the practice of Corporate Social Responsibility by furniture companies in Jepara. Data collection methods used in this study were interviews, direct observation, and analysis of company documents. Data were analyzed by triangulation and interpretation. From the research conducted it can be concluded that the comapany’s motivation in implementing CSR undertaken by the company from Jepara regency furniture is the company’s commitment and enhance the reputation of the company. While the practice of CSR that have been made furniture enterprises in Jepara regency consists of several fields, namely a. economy, including internal and external sectors. Internal sector is focused on training programs for employees. The external sector was focused on facilitating the community development patterns, community groups, and cooperatives. b. Social areas, including the provision of public facilities (infrastructure development, social welfare, education and sports. c. Environment areas, including sustainable water supply.

  15. AN INVESTIGATION ON THE CUSTOMER RELATIONSHIP MANAGEMENT IN FURNITURE STORES

    Directory of Open Access Journals (Sweden)

    İlker Akyüz

    2004-11-01

    Full Text Available The most valuable thing for corporations is customers in today’s competitive environment. The evaluation obtained with suitable methodology is important vitally in the success of customer relationship management systems applied for the continuous customer satisfaction and devotion. Continuous customer satisfaction, development of communication skills with customers, caring with customers’ desires and compliments before and after sale just in sale time, development of the quality of services being offered to the customers is dependent on the determining customer problems closely and giving customer focused services. In this study, it was tried to reveal the customer relationship management, communication with customer, customer focused sale offered before, after and just in sale time in some furniture stores located in Trabzon. It was found that the furniture stores in Trabzon have been generally trying to give customer focused sale services

  16. Assessment of office furniture and knowledge of work ergonomics ...

    African Journals Online (AJOL)

    Background: Poor posture when maintained for a long period can result in musculoskeletal injuries and deformities. Aims: This study aimed at investigating the knowledge of work ergonomics among bank workers, and the ergonomic compliance of office furniture used in some banks, in Enugu metropolis. Methods: This is a ...

  17. Analysis of the most relevant anthropometric dimensions for school furniture selection based on a study with students from one Chilean region.

    Science.gov (United States)

    Castellucci, H I; Arezes, P M; Molenbroek, J F M

    2015-01-01

    Most of the worldwide standards used for furniture selection suggest the use of the Stature of the school children, assuming that all the other anthropometric characteristics will also be appropriate. However, it is important to consider that students' growth differ with age. The aim of this study is to determine if Popliteal Height can be used as a better, or more adequate, measure for classroom furniture selection when comparing with Stature. This study involved a representative group of 3046 students from the Valparaíso Region, in Chile. Regarding the methodology, eight anthropometric measures were gathered, as well as six furniture dimensions from the Chilean standard. After assigning the level of school furniture using Stature and Popliteal Height to each of the students, six mismatch equations were applied. The results show that when using Popliteal Height, higher levels of match were obtained for the two more important furniture dimensions. Additionally, it also presents a better cumulative fit than Stature. In conclusion, it seems that Popliteal Height can be the most accurate anthropometric measure for classroom furniture selection purposes. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  18. Radiation technology in finishing process improves health, safety and environment (HSE) in the furniture manufacturing industry

    International Nuclear Information System (INIS)

    Ahmad Shakri Mat Seman

    1999-01-01

    In furniture manufacturing, processes like cross cutting, molding, planning, shaping, turning, assembling and finishing are involved. The most significant types of negative impact of these processes are such as dust emission, noise, hazardous work, health risk, emission of organic solvent, toxic chemicals emission and chemical waste. In the finishing process, a number of negative effects that will cause health, safety and environmental (HSE) performance. This article highlights the environmental problems in the furniture finishing processes and how the radiation technology can reduce these negative impacts. The drawbacks that hamper the manufacturers from adopting this technology are also discussed. The objective of the paper is to create the awareness among the industrialist and consumers on the HSE hazardous in furniture finishing and steps can be taken to improve

  19. Wood handbook : wood as an engineering material

    Science.gov (United States)

    Robert J. Ross; Forest Products Laboratory. USDA Forest Service.

    2010-01-01

    Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

  20. Explaining the Criteria of Designing Urban Furniture and Landscape, with a Cultural-social Design Approach

    Directory of Open Access Journals (Sweden)

    Marzieh Allahdadi

    2017-09-01

    Full Text Available Attention to the deep relationship between human personality and the place in which he lives causes the place to play a crucial role in cultural transformations and prevalence of human life style and formation of values, connections and human activities. Cities are not just a place of transit, but they are also environments that must have mutual communications with the inhabitants in order to realize the meaning of citizen, as there is a distinction between the status of citizenship and urbanization. Urban furniture is one of the elements of urban space that its quantity, beauty and durability play a major role in achieving a healthy and favorable city and satisfies the needs of citizens in terms of performance and beauty. Accordingly, the present study, using descriptive-analytical method and with data collection tools including library and documentary studies, examines the concept of product ecology and answers to the questions whether urban furniture can start or support social interaction or positively affect the roles of citizens? In this paper, the relationship between social-cultural design in urban furniture and the disturbances regarding uneven distribution of elements are identified, and finally the criteria of designing urban furniture and landscape are expressed with a social-design approach.

  1. A research on the preferences of material and size in the Turkish kitchen furniture industry

    Directory of Open Access Journals (Sweden)

    Tuncer Dilik

    2017-11-01

    Full Text Available This study intended to investigate the interaction developing rapidly through the impact of globalization experienced in every field on the material and size preferences of the kitchen furniture sector. The results of the survey conducted on the Turkish kitchen furniture manufacturers were evaluated within the framework of the international kitchen trends. As a result it was seen that the most preferred kitchen area was between 8 and 11 m2 regarding the distribution of the kitchen areas in Turkey. A tendency of using MDF in the production of the kitchen cabinets was observed with 61.8% in relation with the body material preferred to be used in the kitchen furniture sector. The preferred body sizes of the kitchen cabinet was determined by considering the width and height preferences of both the upper and lower cabinets, the size of 61-90 cm seemed to be the most preferred sizes both for the upper and lower cabinets. According to the height, 72 cm size was found to be the most preferred size. While the most preferred size among the cellar cabinets was determined to be smaller than 60 cm, its height was revealed to be bigger than 200 cm. The most preferred kitchen furniture base was detected to be 12 cm.

  2. Proposal for the Award of a Blanket Order for the Supply of Office Furniture

    CERN Document Server

    1999-01-01

    This document concerns the award of a blanket order for the supply of office furniture. Following a market survey carried out among 87 firms in seventeen Member States, a call for tenders (IT-2590/SPL) was sent on 5 November 1998 to nine firms in four Member States. By the closing date, CERN had received seven tenders. The Finance Committee is invited to agree to the negotiation of a contract for the supply of office furniture with the company A+Z Bürosysteme (DE), the lowest bidder complying with the specification, up to a total amount of 1 600 000 Swiss francs, not subject to revision until 30 March 2000, for an initial period of three years, with an option to renew the contract for two further one-year periods. A+Z Bürosysteme has declared the following origin of the furniture covered by this adjudication proposal: DE - 90% and CH - 10%.

  3. An exploratory assessment of the attitudes of Chinese wood products manufacturers towards forest certification.

    Science.gov (United States)

    Chen, Juan; Innes, John L; Kozak, Robert A

    2011-11-01

    Interviews with Chinese forest products manufacturers were conducted to explore their attitudes towards forest certification and related issues. Participants comprised owners, CEOs, and managers in 20 Chinese wood products companies, including producers of furniture, doors, flooring, and various engineered wood products. The interviews were used to analyze the extent to which participants were considering adopting forest certification and what might motivate such a decision. This was done by assessing their awareness and knowledge of certification. The results indicated that participants' understanding of forest certification was extremely low, despite major efforts in China to raise awareness of the issue. Potential economic benefits were the most frequently cited reason to adopt certification, including gaining or maintaining competitive advantage over their industry counterparts, improved access to both domestic and export markets, better customer recognition, and enhanced corporate responsibility practices. Some interviewees (3 out of 20) considered that certification would become a mandatory requirement or industry standard, and that this would be the only viable motivation for certification given that the financial benefits were potentially limited. According to the participants, the main differences between certified and uncertified wood products operations related to improved market access and public image. Interviewees felt that cooperation between and support from governments and the forest industry would enable the enhanced awareness of certification amongst manufacturers and the general public. This, in turn, could serve to stimulate demand for certified products. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Household Hazardous Waste

    Science.gov (United States)

    ... waste collection" near your zip code in the Earth 911 database Exit for more information. Contact your ... lemon juice in one pint of mineral or vegetable oil and wipe furniture. Rug Deodorizer Liberally sprinkle ...

  5. Once upon a time... Dead wood in french forests

    International Nuclear Information System (INIS)

    Bartoli, Michel; Geny, Bernard

    2005-01-01

    For many centuries in France, dead wood was an essential source of energy for households. Harvesting dead wood was both authorised - in particular, through allocation of rights of use - and highly regulated. Restrictions on its employment were established by texts ranging from the 1515 royal decree to an implementation decree of 1853 that is still applicable today - its owner must have formally released the wood. It must be dry and lying on the ground. It can be broken only by hand and no means other than human labour can be used to transport it. Furthermore, it cannot be the outcome of an act that caused a stem to dry while standing. In the 19. century, the huge number of trials, some of which went as far as the supreme court, shows just how important dead wood was socially, and much coveted by the paupers who were confronted with increasingly repressive forest police. These trials provide an excellent reflection of a society that harvested all the proceeds of felling. From the end of the 18. century to the middle of the 20., forestry treatises always dealt with removal of dead trees as a priority. Dead wood was for a long time and up to very recently abhorred but latterly has begun to be considered as an important compartment of biodiversity. History shows that it is no surprise that for the time being there is little of it to be found in our forests. (authors)

  6. Attitudes of U.S. retailers toward China, Canada, and the United States as manufacturing sources for furniture: an assessment of competitive priorities

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Torsten Lihra; Mary Frye

    2006-01-01

    While much has been written regarding the declining global competitiveness of U.S. furniture manufacturing and the subsequent loss of domestic market share and jobs, less is known about the role of retailers in furniture importing. This study investigated the attitudes of U.S. furniture retailers toward China, Canada, and the United States as manufacturing sources for...

  7. HOUSEHOLD CHARACTERISTICS AND POTENTIAL INDOOR AIR POLLUTION ISSUES IN RURAL INDONESIAN COMMUNITIES USING FUELWOOD ENERGY

    Directory of Open Access Journals (Sweden)

    Haryono Setiyo Huboyo

    2016-03-01

    Full Text Available Two rural communities using fuel wood energy in mountainous and coastal areas of Java island in Indonesia have been surveyed to know their household characteristics and the related potential indoor air pollution issues. By random sampling, we characterized fuel wood users only. The fuel wood use was mainly due to economic reason since some of the users were categorized as low-income families. Communities in the mountainous area were exposed to higher risk of indoor air pollution than those in coastal area due to their house characteristics and behavior during cooking. Both communities, however, were aware of indoor air pollution issues and indicated the sources. They also prioritized the factors to be controlled, which they perceived as the main cause of indoor air pollution problem.

  8. Perceptions of firms within a cluster regarding the cluster's function and success: Amish furniture manufacturing in Ohio

    Science.gov (United States)

    Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

    2011-01-01

    The Amish-based furniture manufacturing cluster in and around Holmes County, OH, is home to some 400 shops and has become an important regional driver of demand for hardwood products. The cluster has expanded even as the broader domestic furniture industry has declined. Clustering dynamics are seen as important to the success, but little information has been available...

  9. Ergonomic Based Design and Survey of Elementary School Furniture

    Science.gov (United States)

    Maheshwar; Jawalkar, Chandrashekhar S.

    2014-01-01

    This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

  10. Carbon monoxide concentrations in outdoor wood-fired kitchens in Ouagadougou, Burkina Faso--implications for women's and children's health.

    Science.gov (United States)

    Thorsson, Sofia; Holmer, Björn; Andjelic, Andreas; Lindén, Jenny; Cimerman, Sandra; Barregard, Lars

    2014-07-01

    A majority of households in developing countries rely on biomass fuel for cooking, typically burned in open fires or simple stoves. The incomplete combustion of these fuels causes adverse health effects such as respiratory diseases, especially among women and children. However, quantitative data on pollution levels and on associated diseases are limited. We examined cooking habits and self-reported health in 31 households with outdoor open wood fires in Ouagadougou, Burkina Faso, using structured interviews. In eight households, carbon monoxide (CO) was measured using passive sampling. In addition, meteorology and ambient CO concentrations were assessed. The average CO concentration during cooking was 4.3 ppm, with a maximum of 65.3 ppm and minimum of 0.3 ppm (1-min values). A clear daily pattern was observed, with relatively low concentrations during the day and high during the evening, occasionally exceeding the World Health Organization 1- and 8-h guidelines when the air stabilised. On average, CO concentrations were 43 % higher in kitchens located in closed yards than in those located in open yards, showing that fireplace location affected the levels. Eye irritation and coughing among women and children were reported by 30 % of the households. Based on previously reported relations between CO concentrations and fine particles (health risk among women and children in households with outdoor open wood fires. The results suggest that burning should be limited between sunset and dawn and in areas with limited ventilation to reduce pollutions levels.

  11. Prevent Tipping Furniture from Injuring or Killing Young Children

    Science.gov (United States)

    ... more upsetting than the sudden death of a child — killed by a piece of a furniture, appliance or a television falling on them. “It can happen in a ... be secured. Check with home improvement stores or child retail stores and ask experts what they ... television and computer equipment low to the ground. Do ...

  12. Wood : adhesives

    Science.gov (United States)

    A.H. Conner

    2001-01-01

    This chapter on wood adhesives includes: 1) Classification of wood adhesives 2) Thermosetting wood adhesives 3) Thermoplastic adhesives, 4) Wood adhesives based on natural sources 5) Nonconventional bonding of wood 6) Wood bonding.

  13. 40 CFR 52.478 - Rules and Regulations.

    Science.gov (United States)

    2010-07-01

    ... truck manufacturing; (2) Coating of cans, coils, paper, fabric and vinyl, metal furniture, large... batch processes in the synthetic organic chemical manufacturing industry; (7) Volatile organic storage; (8) Wood furniture coatings; (9) Offset lithography; (10) Clean-up solvents. [64 FR 57781, Oct. 27...

  14. Analysis of black japanned furniture by XRF

    Energy Technology Data Exchange (ETDEWEB)

    Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P., E-mail: valter.felix@ifrj.edu.br, E-mail: renato.freitas@ifrj.edu.br, E-mail: annalecastro@hotmail.com [Instituto Federal do Rio de Janeiro (LISCOMP/IFRJ-CPAR), Paracambi, RJ (Brazil). Lab. de Instrumentação e Simulação Computacional; Pereira, Marcelo O.; Carvalho, Cristiano S.; Silva, Fabricio L., E-mail: marcelocefetrj@gmail.com [Centro Federal de Educação Tecnológica Celso Suckow da Fonseca (CEFET), Nova Iguaçu, RJ (Brazil)

    2017-07-01

    Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

  15. OFFICE FURNITURE DESIGN SET: SINTEX (1965-1977

    Directory of Open Access Journals (Sweden)

    Aida Puente Toraño

    2013-07-01

    Full Text Available Litton Industries decided to establish one of its divisions in Northern Spain in 1965 called Litton-Cole. They chose Asturias to set up a factory intended to manufacture office furniture with a metallic component. The region had the potential to develop this kind of product due to its industrial base. It was easy to be provided with materials like steel, but above all a specialized workforce from Asturias’ Arms Industry. In the context of Spanish sixties José Antonio Menéndez Hevia was in charge of designing several banks and other public commercial establishments. Due to his connection with the Asturian banking sector, he had the opportunity to design office furniture set for Cole Steel. Cole Steel was the commercial name for the Asturian factory. Menéndez Hevia designed a very thorough set with almost twenty possible combinations that was commercialized under the name of Sintex. The series was successful on a national scale which was aimed at furnishing bank branch offices, but it was also exported to countries like Italy. Thousands of units were sold as part of one of the few Spanish design products manufactured in series at that time. The factory was closed in 1977, but in the general background of Spanish industrial design this series was forgotten, being part of our usual anonymous design history.

  16. Analysis of black japanned furniture by XRF

    International Nuclear Information System (INIS)

    Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P.

    2017-01-01

    Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

  17. THE STRATEGIC RELEVANCE OF TECHNOLOGY-RELATED VARIABLES TO THE COMPETITIVENESS OF SMALL - TO MEDIUM-SIZED FURNITURE MANUFACTURERS

    Directory of Open Access Journals (Sweden)

    Lourens, A. S.

    2012-11-01

    Full Text Available SMMEs can make a critical and positive economic contribution to South Africa, and small- to medium-sized furniture manufacturers (SM/FMs have the potential to contribute to economic growth, job creation, and GDP. However, the furniture industry has not stayed abreast of technological advances. To survive in an environment of increasing competition and imports, competitive strategies must be devised. One such strategy is for technology adoption and implementation that can provide solutions for the furniture industry to improve speed, quality, variety, flexibility, and productivity, resulting in improved competitiveness. However, the adoption of technology means that its acquisition and application must be managed strategically, as the use of technology involves far more than simply taking it into account during the business-plan

  18. Gathering structured reflection in the furniture business by Trend Mapping

    DEFF Research Database (Denmark)

    Frei, Andrea Erika; Eriksen, Kaare Riise

    2015-01-01

    Setting up the direction for new product designs in the furniture business can be more or less structured and in many situations the idea for new design concepts, constructions, details, coloring or choice of material are directed by random input from retailers or external designers or from...

  19. Effectiveness of low cost adapted school furniture on the functional performance of a child with cerebral palsy

    Directory of Open Access Journals (Sweden)

    Marco Aurélio Teixeira Piovezanni

    2014-06-01

    Full Text Available Individuals with cerebral palsy present an atypical motor function, characteristic altered postures in movement coordination and muscle tone. This causes limitations in their ability to perform functional activities. In this context, the introduction of assistive technology is vital to the objective of augmenting their ability to function productively and be included in society. It is common for individuals with cerebral palsy to have difficulty maintaining body dynamics, especially with seated posture. The objective of this study is to produce an adapted school desk and adapted school chair with low cost materials and to study their efficacy in adjusting the writing motor skills of a child with cerebral palsy. This stydi’s case is a boy who has been diagnosed with diplegic cerebral palsy. The collection and registration of data was done in three stages, with the child positioned in adapted furniture, regular school furniture and again in the furniture adapted to establish a comparison. Data analysis was through nonparametrical statistical tests. There was no statistical significance and was verified inconsistency in the data presented, because cannot be said for sure wich furniture was more effective in carrying while performing a proposed task and even if there was learning motor with its repetition. This fact does not invalidate the adequacy of school furniture to the student with cerebral palsy, because is an important factor facilitate control and postural stability to the individual, which interferes with fine motor skills of these individuals, influencing their performance in school activities.

  20. College and Community in Partnership: The Furniture College at Letterfrack.

    Science.gov (United States)

    Rosenfeld, Stuart A.

    2001-01-01

    A community economic development organization in rural Ireland partnered with a technical college to build a college to teach furniture design and manufacturing, with an emphasis on entrepreneurship and new production technologies. The college has been successful in attracting good students and helping them find employment. A research and…

  1. Household hazardous waste in municipal landfills: contaminants in leachate

    International Nuclear Information System (INIS)

    Slack, R.J.; Gronow, J.R.; Voulvoulis, N.

    2005-01-01

    Household hazardous waste (HHW) includes waste from a number of household products such as paint, garden pesticides, pharmaceuticals, photographic chemicals, certain detergents, personal care products, fluorescent tubes, waste oil, heavy metal-containing batteries, wood treated with dangerous substances, waste electronic and electrical equipment and discarded CFC-containing equipment. Data on the amounts of HHW discarded are very limited and are hampered by insufficient definitions of what constitutes HHW. Consequently, the risks associated with the disposal of HHW to landfill have not been fully elucidated. This work has focused on the assessment of data concerning the presence of hazardous chemicals in leachates as evidence of the disposal of HHW in municipal landfills. Evidence is sought from a number of sources on the occurrence in landfill leachates of hazardous components (heavy metals and xenobiotic organic compounds [XOC]) from household products and the possible disposal-to-emissions pathways occurring within landfills. This review demonstrates that a broad range of xenobiotic compounds occurring in leachate can be linked to HHW but further work is required to assess whether such compounds pose a risk to the environment and human health as a result of leakage/seepage or through treatment and discharge

  2. Business Challenges and Design: Theory and Practice in the Furniture Industry in the Republic of Croatia

    OpenAIRE

    Radović, Romina

    2013-01-01

    Background: A systematic and continuous product policy management is important for a company's competitiveness and the question is to what extent and in what way companies engaged in the furniture manufacturing sector actually apply them. Objectives: The objective of this paper is to explore to what extent the design profession is involved in the product policy and teams which define market properties of products in the furniture industry. Methods: In order to achieve the objectives of this p...

  3. Spatial Determinants on Export marketing activity in Marshallian Districts: An investigation of the Danish Furniture Industry

    DEFF Research Database (Denmark)

    Andersen, Poul Houman

    2002-01-01

    The purpose of the contribution is investigate the role of localised districts on the organisation of export activities in small and medium-sized furniture producers. To what extent do local environments influence the export activities taken on by firms?......The purpose of the contribution is investigate the role of localised districts on the organisation of export activities in small and medium-sized furniture producers. To what extent do local environments influence the export activities taken on by firms?...

  4. Methodology and estimation of the welfare impact of energy reforms on households in Azerbaijan

    Science.gov (United States)

    Klytchnikova, Irina

    This dissertation develops a new approach that enables policy-makers to analyze welfare gains from improvements in the quality of infrastructure services in developing countries where data are limited and supply is subject to interruptions. An application of the proposed model in the former Soviet Republic of Azerbaijan demonstrates how this approach can be used in welfare assessment of energy sector reforms. The planned reforms in Azerbaijan include a set of measures that will result in a significant improvement in supply reliability, accompanied by a significant increase in the prices of energy services so that they reach the cost recovery level. Currently, households in rural areas receive electricity and gas for only a few hours a day because of a severe deterioration of the energy infrastructure following the collapse of the Soviet Union. The reforms that have recently been initiated will have far-reaching poverty and distributional consequences for the country as they result in an improvement in supply reliability and an increase in energy prices. The new model of intermittent supply developed in this dissertation is based on the household production function approach and draws on previous research in the energy reliability literature. Since modern energy sources (network gas and electricity) in Azerbaijan are cleaner and cheaper than the traditional fuels (fuel wood, etc.), households choose modern fuels whenever they are available. During outages, they rely on traditional fuels. Theoretical welfare measures are derived from a system of fuel demands that takes into account the intermittent availability of energy sources. The model is estimated with the data from the Azerbaijan Household Energy Survey, implemented by the World Bank in December 2003/January 2004. This survey includes an innovative contingent behavior module in which the respondents were asked about their energy consumption patterns in specified reform scenarios. Estimation results strongly

  5. Achievements of the ITB's--Furniture and Timber Industry Training Board

    Science.gov (United States)

    Industrial Training International, 1974

    1974-01-01

    The Furniture and Industry Training Board set out in 1965 to find a means of successfully implementing management training in small firms. The author describes research efforts undertaken by the Board which led to the development of the training program now in use--management development based on company appraisal. (AJ)

  6. Use of Augmented Reality in the furniture industry

    OpenAIRE

    Carvalho, Elizabeth, Simão; Maçães, Gustavo; Brito, Paulo; Varajão, Isabel; Sousa, Nuno

    2011-01-01

    The architects conceive the interior visual aspect of a house based on sketches and drawings. These drawing schemes are perfectly understandable by technicians that are responsible for their implementation, but to the client, most of the time, they seem somewhat unrealistic and ungraspable in terms of visual model. This issue is especially sensitive when the inner components are actually pieces of different kinds of furniture and other decoration stuff. The ideal situatio...

  7. Analysis of successful rate factors for small and medium enterprises in furniture manufacturing sector in Klaten Regency - Central Java, Indonesia

    Science.gov (United States)

    Budhi Utomo, R.; Lasminiasih; Prajaka, S.

    2018-03-01

    Small and Medium Enterprises (SMEs) are business activities that can expand the level of employment rate and provide economic services to the wider community and can play a role in the process of equalizing and improving people’s income, stimulating economic growth as well as realizing national stabilities. The aim of this study is to identify the factors of the success rate for Small and Medium Enterprises (SMEs) in furniture manufacturing sector in Klaten regency, Central Java, Indonesia. The method employed in this study was descriptive qualitative by also employing quantitative analysis of which the data were collected through observations, interviews and by administering questionnaires. The results seemed to indicate that the furniture business in Klaten is still experiencing difficulties in managing its various aspects of business, namely in terms of marketing (either directly or indirectly or by making the best use media of technology) and managing capital. All this time, the SMEs in furniture manufacturing sector in Klaten have been utilizing a very simple system in producing tables, chairs, wardrobes and any other furniture products which are then distributed to be sold by larger furniture companies. This condition makes the SMEs unable to be independent in running their business.

  8. Analisis Faktor Risiko Paparan Debu Kayu Terhadap Gangguan Fungsi Paru Pada Pekerja Industri Pengolahan Kayu PT. Surya Sindoro Sumbing Wood Industry Wonosobo

    Directory of Open Access Journals (Sweden)

    Meta Suryani

    2015-12-01

    Full Text Available ABSTRAK Background: One of the negative impacts of wood processing industry is air pollution caused by wood ash that occurred during the process or as the output of the industry. The wood ash will contaminate the industry area as well as the environment so not only the workers, but also the people living around the factory will be exposed to ash from raw material, added material, and the output, thus causing lung function disturbance.  The aim of this research is to measure the risk of factors that causes lung function disturbance to the workers in wood processing industry at PT Surya Sindoro Sumbing Wood Industry Wonosobo. Method : This is an observational research using cross-sectional design. The samples are workers that fulfill the criteria inclusively and exclusively as many as 70 persons. This research was done in February 2005 and the data collection was done using wood ash content measurement in Furniture Component (FC and Wood Working Area (WWA sections, lung function capacity measurement, body height and body weight measurements, as well as interview with the respondents. Result : This research showed that the amount of the wood ash in WWA and FC of 6.1452mg/m3 and 4.0101mg/m3 respectively; and the average of lung function capacity on the workers is 92.04% FEV1/FVC with standard deviation of 6.68 with the lowest and the highest rate of 66% FEV1/FVC and 100% FEV1/FVC respectively. The data analysis in this research used chi-square test, Independent   t Test,while the multivariat analysis used logistic regression test with enter method. The statistics test showed that there was a relationship between the working period and the smoking habit with lung function capacity (p0.05. Conclusions : The working period and the smoking habit at the same time can become the risk factor of the lung function disturbance. As such, smoking prohibition during working hours in the wood processing industry should be applied in order to avoid lung

  9. Demand for woodfuels by households in the Province of Ilocos Norte, Philippines

    Energy Technology Data Exchange (ETDEWEB)

    Hyman, E

    1985-12-01

    This paper presents the results of a survey on woodfuel consumption conducted in the Province of Ilocos Norte, the Philippines. The survey examined household consumption of wood and other fuels such as coconut shells and husks, rice hulls and stems, bagasse, bamboo, animal dung, charcoal, kerosene, liquefied petroleum gas and electricity. The author describes the various pressures on the woodfuel supply in the province and patterns of consumption, collection and ways in which consumers are trying to compensate for their relatively high levels of fuelwood consumption by reafforestation and turning to other fuels. The author concludes with a number of policy options. These include an extensive tree planting program, the introduction of more fuel-efficient wood-stoves, and the increased substitution of other fuels such as bamboo or kerosene. 2 tables.

  10. On the necessity of improving the environmental impacts of furniture and appliances in net-zero energy buildings.

    Science.gov (United States)

    Hoxha, Endrit; Jusselme, Thomas

    2017-10-15

    There is now clear evidence regarding the extensive use of furniture and appliances in daily human life, but there is less evidence of their impact on the environment. Responding to this gap in knowledge, this study focuses on an assessment of the environmental impacts of furniture and appliances as used in highly energy efficient buildings. Their primary energy, non-renewable energy and global warming potential indicators have been assessed by extending the boundaries of the Life Cycle Assessment (LCA) study beyond the building itself. In conclusion, we found that furniture and appliances were responsible for around 30% of greenhouse gas emissions and non-renewable energy consumption and 15% of primary energy consumption comparing to the overall impacts of the building. Since embodied impacts represent the largest values, the process for labelling the appliances' energy efficiency should encompass a life-cycle point of view, not just a usage point of view as the case currently. Among office appliances, computer equipment was ranked as the highest impacting element, especially laptops and monitors. As for domestic appliances, refrigerators and electric ovens had the biggest impacts. Concerning furniture, the greatest impacts were from office and kitchen cabinets. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Cord Wood Testing in a Non-Catalytic Wood Stove

    Energy Technology Data Exchange (ETDEWEB)

    Butcher, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Trojanowski, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wei, G. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2014-06-30

    EPA Method 28 and the current wood stove regulations have been in-place since 1988. Recently, EPA proposed an update to the existing NSPS for wood stove regulations which includes a plan to transition from the current crib wood fuel to cord wood fuel for certification testing. Cord wood is seen as generally more representative of field conditions while the crib wood is seen as more repeatable. In any change of certification test fuel, there are questions about the impact on measured results and the correlation between tests with the two different fuels. The purpose of the work reported here is to provide data on the performance of a noncatalytic stove with cord wood. The stove selected has previously been certified with crib wood which provides a basis for comparison with cord wood. Overall, particulate emissions were found to be considerably higher with cord wood.

  12. Regional formation of oxidants. Caused by emissions from wood firing; Regional oxidantbildning. Till foeljd av utslaepp fraan vedeldning

    Energy Technology Data Exchange (ETDEWEB)

    Andersson-Skoeld, Y [Swedish Environmental Research Inst., Stockholm (Sweden)

    1993-09-01

    An atmospheric trajectory model has been used in case studies to calculate the regional ozone formation due to emissions from household wood burning in Sweden. The simulations are conducted in various types of environments and describe a number of different meteorological conditions. The case studies show that the ozone contribution from wood burning is low. The formation of PAN and aldehydes is more pronounced. The concentration of PAN in Sweden is, however, expected to be far below the levels affecting health and environment as are the concentrations of aldehydes. 25 refs, 7 tabs

  13. Analysis of school furniture used in computer classrooms

    OpenAIRE

    Jiří Tauber

    2011-01-01

    With the respect to the fast development of new computer technologies, it is unconditionally necessary that school furniture reflected this trend and adapted to it. Our use of computer technologies and utilities in teaching is increasing. Therefore, it is necessary to improve school desks so that they would be fit for new computer technology. Creation of a compact set of information relative to the issue concerned, which would comprise of needs and requirements for individual pieces of furnit...

  14. Fine particle number and mass concentration measurements in urban Indian households.

    Science.gov (United States)

    Mönkkönen, P; Pai, P; Maynard, A; Lehtinen, K E J; Hämeri, K; Rechkemmer, P; Ramachandran, G; Prasad, B; Kulmala, M

    2005-07-15

    Fine particle number concentration (D(p)>10 nm, cm(-3)), mass concentrations (approximation of PM(2.5), microg m(-3)) and indoor/outdoor number concentration ratio (I/O) measurements have been conducted for the first time in 11 urban households in India, 2002. The results indicate remarkable high indoor number and mass concentrations and I/O number concentration ratios caused by cooking. Besides cooking stoves that used liquefied petroleum gas (LPG) or kerosene as the main fuel, high indoor concentrations can be explained by poor ventilation systems. Particle number concentrations of more than 300,000 cm(-3) and mass concentrations of more than 1000 microg m(-3) were detected in some cases. When the number and mass concentrations during cooking times were statistically compared, a correlation coefficient r>0.50 was observed in 63% of the households. Some households used other fuels like wood and dung cakes along with the main fuel, but also other living activities influenced the concentrations. In some areas, outdoor combustion processes had a negative impact on indoor air quality. The maximum concentrations observed in most cases were due to indoor combustion sources. Reduction of exposure risk and health effects caused by poor indoor air in urban Indian households is possible by improving indoor ventilation and reducing penetration of outdoor particles.

  15. Our Breaths We Take: Outdoor Air Quality, Health, and Climate Change Consequences of Household Heating and Cooking with Solid Fuels

    Science.gov (United States)

    Chafe, Zoe Anna

    Worldwide, nearly 3 billion people--40% of the global population--burn wood, coal, and other solid fuels every day to cook their food; this number is even larger when including those who heat their homes with solid fuels as well. Exposure to pollution from heating and cooking fires causes about 3 million deaths each year, making it one of the biggest environmental health problems the world faces. The harm from this smoke is not restricted to those who breathe it, however: it contains gases and particles that contribute to global climate change as well. Chapter 2 shows that household cooking with solid fuels caused an estimated 12% of population-weighted ambient PM2.5 worldwide in 2010. Exposure to this air pollution caused the loss of 370,000 lives and 9.9 million disability-adjusted life years (DALYs) globally in the same year. In Chapter 3 I demonstrate that household heating with solid fuels caused an estimated 21% of population-weighted ambient PM2.5 in 2010 in Central Europe, 13% in Eastern Europe, 12% in Western Europe, and 8% in North America. Exposure to this air pollution results caused approximately 60,000 premature deaths in Europe, and nearly 10,000 deaths in North America, as well as an estimated 1.0 million disability-adjusted life years (DALYs) in Europe and 160,000 DALYs in North America. Chapter 4 addresses drivers of household wood combustion pollution in the San Francisco Bay Area, where the sector is the largest source of PM 2.5 and regulators recently introduced amendments to wood burning rules for the airshed. Fireplaces are the source of the vast majority (84%) of PM 2.5 from residential wood combustion in the San Francisco Bay Area, despite their use primarily as an aesthetic or recreational combustion activity. By evaluating hypothetical fuel and combustion device changeouts, I find that replacing fireplaces with gas would yield significant health and economic benefits. Specifically, retrofitting frequently used fireplaces (300,000 units

  16. Marketing low-grade hardwoods for furniture stock - a new approach

    Science.gov (United States)

    Hugh W. Reynolds; Charles J. Gatchell

    1979-01-01

    A hardwood shortage of high-grade lumber exists while there is a surplus of low-grade hardwood timber. Two things are needed for the surplus to correct the shortage: a new manufacturing system and a new marketing technique. Utilization research at the Princeton Forestry Sciences Laboratory has developed the new system for converting low-grade hardwood for furniture use...

  17. A model of household energy services in a low-income rural African village

    International Nuclear Information System (INIS)

    Howells, M.I.; Alfstad, T.; Victor, D.G.; Goldstein, G.; Remme, U.

    2005-01-01

    Energy use is closely linked to quality of life in rural Africa. The gathering of fuel-wood and other traditional fuels is a strenuous and time consuming task mainly performed by women; indoor exposure to particulate matter, mainly from cooking and heating with traditional fuels, causes about 2.5 million deaths each year in developing countries (Bruce et al., Bull World Org. 78 (2000) 1078). Modern fuels and appliances allow households to reduce their exposure to smoke from biomass cookers and heaters. Yet modern fuels are costly for income-poor households and often carry their own external costs. For example, numerous children are poisoned from ingesting paraffin, and whole villages have burned from fires triggered by paraffin stoves and lamps

  18. Rural-urban household energy use and inter-relation in the Central Region of the Sudan

    International Nuclear Information System (INIS)

    Elgizouli, I.A.R.

    1990-01-01

    Urban and rural household energy consumption accounts for the major part of total energy consumption in most African countries. It ranges between 50 and 70 percent in African countries with medium per capita incomes and between 58 and 93 percent in those with low per capita incomes. Satisfying household energy needs takes up a substantial portion of the income of the urban household, while in the rural areas much time and effort are spent collecting wood instead of in more productive activities. Woodfuel meets over 85 percent of household energy demand in most African countries. This high level of consumption will remain, irrespective of the country's per capita income: woodfuel will continue to play a major role in the economics of developing countries and especially in the living standards of both rural and urban poor. The two major issues which must be considered are whether the forest resources are going to meet the future demand for woodfuel and whether prices will remain affordable to the low income groups. This paper deals with household energy issues with special reference to the Central Region in the Sudan. It assesses local resources in the region, analyzes consumption patterns of both rural and urban households, and discusses possible solutions to the impact of current energy practices

  19. Analisis Strategi Peningkatan Produksi Mebel di Sentra Industri Kayu

    Directory of Open Access Journals (Sweden)

    Yunida Sofiana

    2011-04-01

    Full Text Available In the latest couple years, both public and private sectors are doing some efforts and innovations to promote several arts and furniture in Indonesia; through media, cooperation program and exhibitions all over the world. However, this is not effective enough to increase furniture production to better level, especially regarding micro central industry. The micro central industry, especially wood central industry in several areas in Java, mostly has stagnant condition in both local and international. Based on the research in wood central industry in Java, there are factors as the effects: the scarcity and quality of wood material, technology dominance of limited woods, less innovation in designing, unintegrated promotion and marketing and also less strategic planning from the government to develop minor industry. This needs to be analysed according to the condition and need of minor central industry. 

  20. IKEA heats and cools with urban wase water. First energy saving furniture centre in Berlin-Lichtenberg; IKEA heizt und kuehlt mit staedtischem Abwasser. Erstes Energiespar-Einrichtungshaus in Berlin-Lichtenberg

    Energy Technology Data Exchange (ETDEWEB)

    Genath, Bernd

    2010-11-15

    In May 2010, the district major of Berlin-Lichtenberg (Federal Republic of Germany), Christina Emmrich, and the future boss of the Swedish furniture furniture IKEA, Jutta Iskalla, symbolically laid the foundation for the meanwhile 46th IKEA furniture store in Germany with a unique building engineering: The urban waste water heats and cools the office rooms and salesrooms via heat pump. The furniture centre is to be opened in December 2010.

  1. Chapter 6: Wood energy and competing wood product markers

    Science.gov (United States)

    Kenneth E. Skog; Robert C. Abt; Karen Abt

    2014-01-01

    Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

  2. Wood adhesives : vital for producing most wood products

    Science.gov (United States)

    Charles R. Frihart

    2011-01-01

    A main route for the efficient utilization of wood resources is to reduce wood to small pieces and then bond them together (Frihart and Hunt 2010). Although humankind has been bonding wood since early Egyptian civilizations, the quality and quantity of bonded wood products has increased dramatically over the past 100 years with the development of new adhesives and...

  3. STRUCTURAL EFFECTS AND MUTATIONS CAUSED BY THE ECONOMIC CRISIS ON FURNITURE TRADE AT THE EUROPEAN UNION LEVEL

    OpenAIRE

    Radu Marginean

    2013-01-01

    The global economic crisis had most negative effects on the entire economic sphere and especially in what the consuming industry is concerned, which may be considered “luxurious”, the way in which we may talk about the furniture industry. Along times of economic crisis at social level, a decrease in financial power at microeconomic, individual level is felt. Under conditions of social decrease in buying capacity, the request for commercial furniture is in rapid fall and thus the industry as s...

  4. Evaluation of service conditions of the machines within the furniture joinery

    OpenAIRE

    Łukasz Zalejski; Noga Mariusz; Wojtysiak Marcin; Foszmanowicz Krzysztof

    2015-01-01

    The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, characteristics of the Total Productive Maintenance (TPM) rate, evaluation of the level of materialized technology using Parker's scale.

  5. Macroergonomic analysis of an assembly sector of a furniture company.

    Science.gov (United States)

    Cristiane, A A Z; Danielle, M D; Vanessa, C B

    2012-01-01

    From of Macroergonomic Analysis of Work were diagnosed the main ergonomics demands in a furniture company in the city of Cambé, Paraná. Through this method we could identify the most problematic points of the analyzed environment for posterior solutions of improvement with the objective of increasing the working and psychological quality of the employees, motivating their good performance and satisfaction.

  6. PERFORMANCE ANALYSIS ON FREIGHT TRANSPORTATION IN FURNITURE INDUSTRY, A CASE STUDY IN BANTUL, YOGYAKARTA, INDONESIA

    Directory of Open Access Journals (Sweden)

    C. H. Soekamto

    2012-06-01

    Full Text Available The Supply Chain Management is a new philosophy encouraging internal and external integration which encompass all the aspects, from the supplier until down to the customers. Transportation plays a major role in achieving efficiency and effectiveness because the role of transportation in the Supply Chain is as the intermediary help to distribute the physical goods from one entity to another entity.  For this reason, the objective of this research is to analyse and measure the effectiveness and efficiency of inbound and outbound logistics in the furniture industry in Bantul, Yogyakarta. Firstly, the author will try to draw the supply chain mapping in order to gain more understanding about the entities in the supply chain.  Secondly, performance of the transportation modes that will be used to move the furniture will be assessed through questionnaire. Thirdly, the author will try to analyse the response if rail transportation is proposed as an alternative transportation mode to move the goods. Lastly, conclusion and recommendation regarding the issue will be derived as implied in the result from data analysis. Keywords: Supply chain management, transportation, performance, furniture industry.

  7. Wood frame systems for wood homes

    Directory of Open Access Journals (Sweden)

    Julio Cesar Molina

    2010-12-01

    Full Text Available The use of constructive systems that combine strength, speed, with competitive differential techniques and mainly, compromising with the environment, is becoming more popular in Brazil. The constructive system in wood frame for houses of up to five stories is very interesting, because it is a light system, structured in reforested treated wood which allows the combination of several materials, besides allowing speed in the construction and total control of the expenses already in the project phase for being industrialized. The structural behavior of the wood frame is superior to the structural masonry in strength, thermal and acoustic comfort. However, in Brazil, the wood frame is still little known and used, due to lack of technical knowledge about the system, prejudice associated the bad use of the wood as construction material, or still, in some cases, lack of normalization. The aim of this manuscript consists of presenting the main technical characteristics and advantages of the constructive system in wood frame homes, approaching the main stages of the constructive process through examples, showing the materials used in the construction, in addition the main international normative recommendations of the project. Thus, this manuscript also hopes to contribute to the popularization of the wood frame system in Brazil, since it is a competitive, fast and ecologically correct system. Moreover, nowadays, an enormous effort of the technical, commercial and industrial section has been accomplished for the development of this system in the country.

  8. EVALUATION OF STREET FURNITURE ACCORDING TO BASIC DESIGN PRINCIPLES

    OpenAIRE

    GHORAB, Peyman; YÜCEL CAYMAZ, Gökçen Firdevs

    2014-01-01

    In the urban context, it is important to create more comfortable and livable environments with proper planning, design and application. Because aesthetic considerations are of more importance today, designing urban furniture to give a more beautiful appearance to cities is of high priority; designers and those working in related disciplines must be careful to observe these principles throughout the design process. This paper describes research conducted to review the aesthetic principles invo...

  9. Fuel- and wood consumption surveys in developing countries: a proposal of an efficient low-cost method and the results of its application in eastern Ethiopia

    Energy Technology Data Exchange (ETDEWEB)

    Poschen, P.; Eiche, G.

    1986-01-01

    The method involves a preliminary survey to establish areas homogeneous for temperature and rainfall regime, natural vegetation, agricultural systems, wood fuel substitutes, housing and cooking habits. Locations are sampled within such areas to reflect variability in presence of forests and other fuel and wood resources, population density, and access to markets. Households are sampled within a location to cover variation in social structure. Results from a survey in the Hararghe highlands differ markedly from previous Ethiopia-wide estimates and show that remaining wood resources supply less than half of the fuel requirements. An effective community forestry programme is urgently required. (Refs. 9).

  10. Wood

    DEFF Research Database (Denmark)

    Unterrainer, Walter

    2014-01-01

    come from? How is it harvested? How is it manufactured and treated ? How are the buildings detailed and protected against weather during construction to keep them dry and make them long-life ? In a period of climate change, forests are the last lungs of the planet to sequestrate CO2. Their global size......Wood – a sustainable building material ? For thousands of years and all over the planet, wood has been used as a building material and exciting architecture has been created in wood. The fantastic structural, physical and aesthetic properties of the material as well as the fact that wood...

  11. The Household Cooking Sector in Nigeria: Environmental and Economic Sustainability Assessment

    Directory of Open Access Journals (Sweden)

    Haruna Gujba

    2015-06-01

    Full Text Available This paper studies life cycle environmental impacts and costs of the household cooking sector in Nigeria from 2003 to 2030. Five scenarios are considered: business as usual, dominated by fuel wood stoves; low penetration of improved fuel wood and solar stoves, as planned by the government; high penetration of these stoves; increased use of fossil fuel stoves; and increased use of electric stoves. If business as usual (BAU continues, the environmental impacts would increase by up to four times and costs by up to five times, mainly because of high fuel wood consumption. Implementing the government’s plan to introduce improved fuel wood and solar stoves would yield no environmental advantages, as the proposed number of stoves is too low. A higher number of the advanced stoves would lead to significant improvements in some impacts but would worsen others so that some trade-offs are needed. From the economic perspective, the scenario with a high use of advanced stoves has the lowest total costs but its capital costs are three times higher than for BAU. The government should prioritise the introduction of advanced stoves to reduce health impact from indoor pollution and reduce pressures on biomass resources; however, this may require subsidies. Fossil fuel and electric stoves would also help to preserve biomass and reduce health impacts from indoor pollution but would lead to an increase in greenhouse gas emissions and depletion of fossil resources.

  12. Black locus (Robinia pseudoacacia L.) and Honey locust (Gleditsia triacanthos L.): technological aspects in relation with the use in solid wood products; Acaia blanca (Robinia pseudoacacia L.) y acacia negra (Gleditsia triacanthos L.): aspectos tecnologicos y relacionados al empleo en productos de madera maciza

    Energy Technology Data Exchange (ETDEWEB)

    Keil, G.; Spavento, E.; Murace, M.; Millanes, A.

    2011-07-01

    Robinia pseudoacacia L. and Gleditsia triacanthos L, are tree species from USA and both was introduced in Europe. In the province of Buenos Aires, Argentina, plantations of these species are scattered, whose wood hasn't been characterized technologically by standardized tests. The objective of this job was to characterize technologically Black locus and Honey locust woods, both implanted in the province of Buenos Aires for its inclusion in the timber market. The physical and mechanical properties determined were: content humidity, apparent densities, dimensional changes, Janka hardness, static bending, cut parallel to fibers,compression perpendicular and parallel to fibers. Natural durability was estimated. Black locus and Honey locust woods were medium density and medium stability, hard, resistant to the cut and the compression perpendicular to fibers and showed values medium to low in parameters of static bending and compression parallel to fibers, values to take into account when designing structural elements. Black locus was the most resistant to fungal degradation. Both woods can be considered suitable for high-value uses in the construction and furniture industries (interior and exterior). (Author) 29 refs.

  13. Wood burning

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, H

    1955-01-01

    Discussed are the use of wood as a fuel, the technique of wood combustion and the operation of wood-burning stoves for cooking and heating. In addition, there is a section which reviews the use of wood stoves in various countries and lists manufacturers of stoves, central heating furnaces and in some cases sawdust burners.

  14. Prediction of fire growth on furniture using CFD

    Science.gov (United States)

    Pehrson, Richard David

    A fire growth calculation method has been developed that couples a computational fluid dynamics (CFD) model with bench scale cone calorimeter test data for predicting the rate of flame spread on compartment contents such as furniture. The commercial CFD code TASCflow has been applied to solve time averaged conservation equations using an algebraic multigrid solver with mass weighted skewed upstream differencing for advection. Closure models include k-e for turbulence, eddy breakup for combustion following a single step irreversible reaction with Arrhenius rate constant, finite difference radiation transfer, and conjugate heat transfer. Radiation properties are determined from concentrations of soot, CO2 and H2O using the narrow band model of Grosshandler and exponential wide band curve fit model of Modak. The growth in pyrolyzing area is predicted by treating flame spread as a series of piloted ignitions based on coupled gas-fluid boundary conditions. The mass loss rate from a given surface element follows the bench scale test data for input to the combustion prediction. The fire growth model has been tested against foam-fabric mattresses and chairs burned in the furniture calorimeter. In general, agreement between model and experiment for peak heat release rate (HRR), time to peak HRR, and total energy lost is within +/-20%. Used as a proxy for the flame spread velocity, the slope of the HRR curve predicted by model agreed with experiment within +/-20% for all but one case.

  15. Produce yellow-poplar furniture dimension at minimum cost by using YELLOPOP

    Science.gov (United States)

    David G. Marten; David G. Marten

    1986-01-01

    Describes a computer program called YELLOPOP that determines the least-cost combination of lumber grades required to produce a given cutting order of furniture dimension parts. If the least-cost mix is not available, YELLOPOP can be used to determine the next best alternative. The steps involved in using the program are also described.

  16. Evaluation of service conditions of the machines within the furniture joinery

    Directory of Open Access Journals (Sweden)

    Łukasz Zalejski

    2015-12-01

    Full Text Available The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, characteristics of the Total Productive Maintenance (TPM rate, evaluation of the level of materialized technology using Parker's scale.

  17. Residential fuelwood consumption in the southeastern U.S

    International Nuclear Information System (INIS)

    Christiansen, E.H.; Larsen, M.D.; Rejda, Karen; Bliss, J.C.; Nepal, S.K.

    1993-01-01

    A telephone survey of households in 13 states in the southeastern U.S. determined residential fuelwood acquisition and use for heating during the 1991 heating season. Although wood burning accounted for only 10% of the total household heat requirement of the region, it accounted for 51% of the total heat requirements of wood-burning households. One-quarter (25%) of the households burned wood, consuming almost 9 million standard cords. Three-quarters (77%) of wood-burning households reported that wood burning contributed to household heating requirements. Wood as a source of home heating was particularly important to low income households, both rural and urban. Wood is the sole source of home heating for 17% of the wood-burning households in the regions. (Author)

  18. Removal or transport of office furniture and PCs

    CERN Multimedia

    TS Department

    2008-01-01

    The TS/FM Group wishes to remind users that requests for the removal or transport of office furniture must be made using the EDH ‘Transport request’ form. Please select the "Removals" category from the drop-down menu to indicate the nature of the request. Requests for the transport of PCs from your office to Bldg. 513 or back must also be made using the EDH ‘Transport request’ form. In this case select the "PC transport" category from the drop-down menu. TS/FM Group Tel. 160239

  19. Household Income Composition and Household Goods

    OpenAIRE

    Voynov, Ivan

    2005-01-01

    The paper focuses on the change in household income composition and the factors that determine it. The results bring additional knowledge about household poverty dynamics. Based on the collective approach to the family and the cooperative game theory it is constructed theoretical model of household income composition change. The change in income composition is a result from bargaining between household members in attempt to defend the most suitable for them income source. Decisive influence i...

  20. Wood burning pollution in southern Chile: PM2.5 source apportionment using CMB and molecular markers.

    Science.gov (United States)

    Villalobos, Ana M; Barraza, Francisco; Jorquera, Héctor; Schauer, James J

    2017-06-01

    Temuco is a mid-size city representative of severe wood smoke pollution in southern Chile; i.e., ambient 24-h PM 2.5 concentrations have exceeded 150 μg/m 3 in the winter season and the top concentration reached 372 μg/m 3 in 2010. Annual mean concentrations have decreased but are still above 30 μg/m 3 . For the very first time, a molecular marker source apportionment of ambient organic carbon (OC) and PM 2.5 was conducted in Temuco. Primary resolved sources for PM 2.5 were wood smoke (37.5%), coal combustion (4.4%), diesel vehicles (3.3%), dust (2.2%) and vegetative detritus (0.7%). Secondary inorganic PM 2.5 (sulfates, nitrates and ammonium) contributed 4.8% and unresolved organic aerosols (generated from volatile emissions from incomplete wood combustion), including secondary organic aerosols, contributed 47.1%. Adding the contributions of unresolved organic aerosols to those from primary wood smoke implies that wood burning is responsible for 84.6% of the ambient PM 2.5 in Temuco. This predominance of wood smoke is ultimately due to widespread poverty and a lack of efficient household heating methods. The government has been implementing emission abatement policies but achieving compliance with ambient air quality standards for PM 2.5 in southern Chile remains a challenge. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Competitive outcomes between wood-decaying fungi are altered in burnt wood.

    Science.gov (United States)

    Edman, Mattias; Eriksson, Anna-Maria

    2016-06-01

    Fire is an important disturbance agent in boreal forests where it creates a wide variety of charred and other types of heat-modified dead wood substrates, yet how these substrates affect fungal community structure and development within wood is poorly understood. We allowed six species of wood-decaying basidiomycetes to compete in pairs in wood-discs that were experimentally burnt before fungal inoculation. The outcomes of interactions in burnt wood differed from those in unburnt control wood for two species:Antrodia sinuosanever lost on burnt wood and won over its competitor in 67% of the trials compared to 40% losses and 20% wins on unburnt wood. In contrast, Ischnoderma benzoinumwon all interactions on unburnt wood compared to 33% on burnt wood. However, the responses differed depending on the identity of the competing species, suggesting an interaction between competitor and substrate type. The observed shift in competitive balance between fungal species probably results from chemical changes in burnt wood, but the underlying mechanism needs further investigation. Nevertheless, the results indicate that forest fires indirectly structure fungal communities by modifying dead wood, and highlight the importance of fire-affected dead wood substrates in boreal forests. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  2. Bellus Furniture lõi edetabelis platsi puhtaks võimsa kasvuga / Aarne Mäe

    Index Scriptorium Estoniae

    Mäe, Aarne, 1967-

    2006-01-01

    Äripäeva koostatud Lääne-Viru ettevõtjate TOP-is troonis esikohal Haljalas tegutsev pehmemööbli firma Bellus Furniture, järgnesid Vest-Woodi puidutööstus Rakveres ja Kunda tsemenditehas. Lisa: Pingerida

  3. Method of an integrated and advanced evaluation of vulnerability. Conceptional-methodical fundamentals and examplary implementation for the water household, power generation and energetic utilisation of wood under climatic change; Methode einer integrierten und erweiterten Vulnerabilitaetsbewertung. Konzeptionell-methodische Grundlagen und exemplarische Umsetzung fuer Wasserhaushalt, Stromerzeugung und energetische Nutzung von Holz unter Klimawandel

    Energy Technology Data Exchange (ETDEWEB)

    Weisz, Helga; Koch, Hagen; Lasch, Petra [Potsdam-Institut fuer Klimafolgenforschung e.V. (Germany)] [and others

    2013-07-15

    Actually, in Germany there are more than hundred investigations on the consequences of the climatic change. It is difficult to evaluate the vulnerability of Germany against the climatic change. Under this aspect, the authors of the contributions report on a method of an integrated and advanced evaluation of vulnerability: Conceptional-methodical fundamentals and exemplary implementation for water household, power generation and energetic utilization of wood under climatic change.

  4. Pleural mesothelioma: Case-report of uncommon occupational asbestos exposure in a small furniture industry.

    Science.gov (United States)

    Oddone, Enrico; Imbriani, Marcello

    2016-01-01

    The relationship between asbestos exposure and malignant mesothelioma is no longer disputed, although it is not always easy to trace past occupational exposure. This report describes a case of uncommon asbestos exposure of a small furniture industry worker, who subsequently died of pleural malignant mesothelioma, to stress the crucial importance of a full reconstruction of the occupational history, both for legal and compensation purposes. Sarcomatoid pleural mesothelioma was diagnosed in a 70-year-old man, who was previously employed as a carpenter in a small furniture industry. He worked for about 6 years in the small factory, was exposed to asbestos during the assembly of the furniture inspired by classical architecture, in which asbestos cement tubes were used to reproduce classical columns. During this production process no specific work safety measures were applied, nor masks or local aspirators. No extra-professional exposure to asbestos was identified. This mesothelioma case was investigated by the Public Prosecutor's assignment that commissioned expert evidence on the legal accountability for the disease. Despite its uncommon expositive circumstance, the length of latency (about 30 years), the duration of exposure, the clinical and histochemical features are all consistent with literature evidence, accounting for the occupational origin of this malignancy. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  5. Sales Application Online of Design Furniture on Mitra Karya Furniture

    Directory of Open Access Journals (Sweden)

    Maimunah

    2016-02-01

    Full Text Available The development of the business world characterized by the increasing number of established companies, both of which are engaged in industry, trade and services. The role of computers use in a company or organization is not a layman anymore but is a must. With the computerized system in the company or organization, all the processes ranging from data processing to making reports and another important documents can be neatly arranged so that can facilitate the process of data storage and retrieval. The sales processing system are running still manually. They are still using flyers to find consumers so that ineffective and inefficient. The sales program is the design research proposed of information systems. By utilizing the technology of computer and internet in order word is to try making the facility of sales better. By creating an online sales system to make the working process does not spread the time so that the sale can run well and be good service. The designs created by using Dreamweaver CS5 and using the MySQL for database so the database stored neatly. The main function of the online sales system is to assist in facilitating the resources to get the latest product sales at MitraKarsa Furniture, so that the customer can buy the latest products easily, anytime and anywhere they want to.

  6. The Assessment of the Character Profile of Wood-based House Users in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Josef Lenoch

    2015-01-01

    Full Text Available In the years 2012–2014 the authors carried out an extensive marketing research among users of wood-based buildings in the Czech Republic. The questionnaire survey had 1,000 respondents – Czech households using a wood-based house. The survey was conducted separately in each region of the Czech Republic (40–100 questionnaires per region. The results were evaluated separately for each region and for the Czech Republic as a whole. Questionnaires consisted of four thematic groups of questions. This paper deals with processing and evaluation of results of the first group of questions. This group addresses characteristics of people using wood-based family houses. The results are evaluated for individual regions and for the whole Czech Republic. The evaluation covers seven characteristics of adults using the surveyed buildings: age of users, type of the buildings’ ownership, educational attainment, sector of employment, profession, type of previous housing, and the size of municipality of the previous housing. The aim of the paper is to create profile of a “common user” of wood-based buildings. The results of the marketing research can be used to enhance competitiveness of companies in the woodworking and construction sector.

  7. DEVELOPMENT OF ENTERPRISE RESOURCE PLANNING APPLICATIONS TO HELP RESOURCES MANAGEMENT OF FURNITURE COMPANY USING TECHNOLOGY WINDOWS COMMUNICATION FOUNDATION

    Directory of Open Access Journals (Sweden)

    Didiek S Wiyono

    2013-09-01

    Full Text Available Furniture companies need the latest information of its resources to maintain efficiency and productivity. ERP can be used as a tool to manage the existing resources on furniture company and can quickly display the suitable information. The study was conducted to design a simple ERP application that can help resource management on the furniture company. ERP application built with object-oriented methods. The implementation is using web technology as the user interface, Windows Communication Foundation (WCF as the application interface with other systems, and HTTP / HTTPS as the transport protocol to access the application. The results of study is a simple ERP application which consist of order management, production, inventory, purchasing, and reporting. ERP applications can be accessible to users through the web. For the purposes of integration, has built 72 services of WCF that can be accessed by other applications even though using different platforms. Keywords: erp, web, windows communication foundation, integration

  8. Waste generation and utilisation in micro-sized furniture-manufacturing enterprises in Turkey.

    Science.gov (United States)

    Top, Y

    2015-01-01

    The number of small-scale businesses within most national economies is generally high, especially in developing countries. Often these businesses have a weak economic status and limited environmental awareness. The type and amount of waste produced, and the recycling methods adopted by these businesses during their operation can have negative effects on the environment. This study investigated the types of waste generated and the recycling methods adopted in micro-sized enterprises engaged in the manufacture of furniture. An assessment was also made of whether the characteristics of the enterprise had any effect on the waste recycling methods that were practised. A survey was conducted of 31 enterprises in the furniture industry in Gumushane province, Turkey, which is considered a developing economy. Surveys were undertaken via face-to-face interviews. It was found that medium-density fibreboard (MDF), and to a lesser extent, chipboard, were used in the manufacture of furniture, and two major types of waste in the form of fine dust and small fragments of board are generated during the cutting of these boards. Of the resulting composite board waste, 96.9% was used for heating homes and workplaces, where it was burnt under conditions of incomplete combustion. Enterprises were found to have adopted other methods to utilise their wastes in addition to using them as fuel. Such enterprises include those operating from a basement or first floor of a building in the cities, those continuing production throughout the year, those in need for capital and those enterprises not operating a dust-collection system. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.

  9. Potential wood protection strategies using physiological requirements of wood degrading fungi

    NARCIS (Netherlands)

    Sailer, M.F.; Etten, B.D. van

    2004-01-01

    Due to the increasing restrictions in the use of wood preserving biocides a number of potential biocide free wood preserving alternatives are currently assessed. Wood degrading fungi require certain conditions in the wood in order to be able to use wood as a food source. This paper discusses the

  10. Perancangan Modular Furniture untuk Food Truck Penjual Makanan Indonesia

    OpenAIRE

    Sherly de Yong, Chetlyne Stefany Soekanto I Gusti Ngurah Ardana

    2016-01-01

    Food and beverage industry growth in Indonesia continues to develop, and need to be traded in location with dense occupants so that the business can be profitable. This has resulted in the emergence of the mobile system, as selling methods are much in demand today. Food vendors are mobile, requiring a furniture design that can support the activity of cooking and selling on a vehicle. By using Kembel design method, through the process of understanding, compressing, processing the data using de...

  11. 26 CFR 1.911-4 - Determination of housing cost amount eligible for exclusion or deduction.

    Science.gov (United States)

    2010-04-01

    ..., nonrefundable fees paid for securing a leasehold, rental of furniture and accessories, household repairs, and..., improvements, and other costs that are capital expenditures; (ii) The cost of purchased furniture or... the individual's dependents, or as part of a tax equalization plan; the fair market value of...

  12. Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

    Science.gov (United States)

    Shirk, Gary M.

    1984-01-01

    Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

  13. Sustainable Competitive Advantage (SCA Analysis of Furniture Manufacturers in Malaysia: Normalized Scaled Critical Factor Index (NSCFI Approach

    Directory of Open Access Journals (Sweden)

    Tasmin Rosmaini

    2016-06-01

    Full Text Available The purpose of this paper is to investigate Malaysian furniture industry via Sustainable competitive advantages (SCA approach. In this case study, sense and respond method and Normalized Scaled Critical Factor Index (NSCFI are used to specify the distribution of companies’ resources for different criteria and detect the attributes which are critical based on expectation and experience of companies’ employs. Moreover, this study evaluates Malaysian furniture business strategy according to manufacturing strategy in terms of analyzer, prospector and defender. Finally, SCA risk levels are presented to show how much company’s resource allocations support their business strategy.

  14. Rural household biomass fuel production and consumption in Ethiopia: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Mekonnen, A. [Addis Ababa Univ. (Ethiopia). Dept. of Economics and Goeteborg Univ. (Sweden)

    1999-04-01

    Over 90 percent of energy consumption in Ethiopia comes from biomass fuels and this pattern is a major cause of land degradation and deforestation in the country. This paper examines biomass fuel collection and consumption behaviour of a sample of rural households in Ethiopia. We use a non-separable agricultural household model to take into account imperfections in, or absence of, markets for fuel and labour used in collection. The method of instrumental variables (2SLS) is used in the estimation of demand functions to take care of endogeneity of virtual (shadow) fuel prices and wages. Negative own-price elasticities indicate advantages of forest policies that can reduce fuel collection time and make more time available for other activities. The results also suggest that fuel choice and mix are influenced by scarcity which indicate a possibility of policy interventions directed at reducing the relative price of wood and encouraging increased dung use as fertilizer and hence reduced land degradation. While income elasticities of demand give indications of increasing viability of such interventions with growth, the absence of evidence of substitutability and the effects of household resource endowment indicate the importance of cooking habits and culture 36 refs, 3 tabs

  15. Economic evaluation of five curing processes for wood coatings

    International Nuclear Information System (INIS)

    Martinez M, I.

    1996-01-01

    In this work we study the economic feasibility of five methods for curing coatings over sheet wood products. Each year, Mexico is producing more than 40 millions of square meters of wood panels, but the demand is of the range of 58 millions of square meters of this product. Two millions are expended after they are coated, and 38 millions without coating, they are coated artisanilly when they are used to make pieces of furniture. The technical characteristics and the costs involved in each one of five methods of curing, are described. Investments involved with each method are processed to establish: fixed costs, variable costs, equilibrium point, and others. Initial investment, coasts and revenues are processed to determine the income statement pro-form, the projected statement of change in financial position, the projected working capital, the projected balance sheet, the cash-flow, and some economical and financial indicators for each one of the five curing methods. With this information, the internal rate of return (IRR) is determined, and used to compare the economic worth of each of the five methods. The five methods are profitable, because all they have a IRR greater than the opportunity cost of capital (15%) of projects with similar characteristics. Despite, with each one of the five methods, the capital invested is recoverable, and profits can be obtained; curing by ultraviolet light or by electron beam, let recover the investment in less than two years, require fewer dollars for investment, and have a IRR of 135% and 111% respectively. Besides ultraviolet light or electron beam curing processes, pollute less with volatile solvents, use the energy efficiently, have greater production rate, and the coating obtained have better quality than with the other three methods. (Author)

  16. Ergo-effects of designed school furniture and sitting positions on students behaviour and Musculo-Skeletal Disorder in Nigerian tertiary institutions

    Directory of Open Access Journals (Sweden)

    A. I Musa

    2011-07-01

    Full Text Available Improper design of school furniture is one of the contributing factors to back pain among students as indicated in some studies. In the case of designing school furniture where sitting constitutes a considerable time in the school, seat becomes important for comfort. This study is carried out in three selected institutions in Nigeria to determine level of musculoskeletal disorder in students’ and the furniture that they use. 720 questionnaires with 240 students (120 boys and 120 girls drawn from each participating institutions were administered and 675 responses were received. The results show that the number of students having MSD, accounted for 93.75%. However, the distributions of pain in the body parts in each school were different. The musculoskeletal pain, mostly concentrated on neck, right shoulders right elbow right wrist right hand, upper back and lower back. The result also reveals that most of the students are sitting on chairs with seat that are too high and too deep or too shallow and of tables that are too high. However, it is recommended that further study on effect of designed school furniture and sitting position in larger sample of students’ representative in Nigeria tertiary institutions should be carried out in order to reduce the effect of body pains.

  17. Incorporation of industrial laundry sludge in the manufacture of particleboards

    Directory of Open Access Journals (Sweden)

    Luciana Cristina Soto Herek Rezende

    2015-10-01

    Full Text Available This study aimed to demonstrate a sustainable alternative to the use of residues by treating industrial laundry wastewater, thereby making them useful in producing wood particleboards as furniture. For this purpose, physical, chemical, and mechanical tests were carried out in order to characterize the product, which showed acceptable characteristics for commercial use as elements in the furniture industry.

  18. Energy wood. Part 2b: Wood pellets and pellet space-heating systems

    International Nuclear Information System (INIS)

    Nussbaumer, T.

    2002-01-01

    The paper gives an overview on pellet utilization including all relevant process steps: Potential and properties of saw dust as raw material, pellet production with drying and pelletizing, standardization of wood pellets, storage and handling of pellets, combustion of wood pellets in stoves and boilers and applications for residential heating. In comparison to other wood fuels, wood pellets show several advantages: Low water content and high heating value, high energy density, and homogeneous properties thus enabling stationary combustion conditions. However, quality control is needed to ensure constant properties of the pellets and to avoid the utilization of contaminated raw materials for the pellet production. Typical data of efficiencies and emissions of pellet stoves and boilers are given and a life cycle analysis (LCA) of wood pellets in comparison to log wood and wood chips is described. The LCA shows that wood pellets are advantageous thanks to relatively low emissions. Hence, the utilization of wood pellet is proposed as a complementary technology to the combustion of wood chips and log wood. Finally, typical fuel cost of wood pellets in Switzerland are given and compared with light fuel oil. (author)

  19. UV/EB curing market in Indonesia

    International Nuclear Information System (INIS)

    Hilmy, N.; Danu, S.

    1999-01-01

    The most application of UV curing of surface coating in Indonesia are on fancy plywood, furniture and wood flooring industry. Other application are on papers, printing ink/labelling, printed circuit board/PCB and dental materials. At present, application of EB curing coating is still in a pilot plant scale due to the high cost of production. Limited number of application of EB curing by using low energy electron beam machine are on wood panels, ceramics and marbles. This paper describes the market and the problem faced by the largest user of radiation curing systems such as the secondary process plywood, furniture and paper industries

  20. Comparison of vermicompost characteristics produced from sewage sludge of wood and paper industry and household solid wastes.

    Science.gov (United States)

    Amouei, A I; Yousefi, Z; Khosravi, T

    2017-01-01

    The aim of this study was to determine the potential of produced compost from the sludge of wastewater treatment plant using earthworms and compare it with the vermicompost produced from household solid waste. In the current study, three treatments with the same conditions in terms of organic wastes type were prepared to produce vermicompost from household solid waste and sewage sludges using earthworms. The standard methods were used to determine the physical and chemical parameters in the different produced vermicomposts. The mean of C/N in the household solid waste, raw biological and chemical sludges was 32, 22.5, and 26.5, respectively. These levels were 16.5, 14.5, and 15 in the vermicomposts. The mean of nitrogen and phosphorus percentages in the vermicompost of solid waste, biological and chemical sludges was 2.2%, 2.6%, 2.3% and 0.72%, 0.54%, and 0.56%, respectively. The mean percentages of organic matters in the initial substrates and vermicomposts of solid waste, biological and chemical sludges were 97.2%, 90%, 80.5% and 65.8%, 67.8% and 63% respectively. The concentrations of heavy metals decreased in all vermicomposts. The EC levels in solid waste, biological and chemical sludges were 1459, 1041, and 1487 μs/cm, respectively. These levels were 544, 385 and 635 μs/cm in the produced compost. Eisenia fetida can convert household solid waste, and biological and chemical sludges produced from wastewater treatment plant into a high-quality and acceptable compost.

  1. Competition in the household heat product markets in Finland

    International Nuclear Information System (INIS)

    Linden, Mikael; Peltola-Ojala, Paeivi

    2005-01-01

    In the article the market of household heat products is defined independently. The market consists mainly of electricity, district heating, light fuel oil, and wood. Geographically household heat product markets are limited to the area which is covered by the local district heating network. We test indirectly whether this market definition is valid, i.e. do different household heat products act as substitutes to each other. However, the substitution may quite often be limited since the local district heat supplier is the only supplier on the area and also electricity companies have high market shares in the area they are located. The amount of competitors even in these enlarged markets is low. Also the local district heating network gives a technological potential to non-competitive product specific pricing. Thus, a relevant case exists where the district heating company can determine the price of its product without constraints from other firms and heat products. We test empirically whether the local prices of district heating are affected by the local heat product market shares of district heating companies. We use panel data which consists of 75 district heating companies in years 1996 - 2002. The data includes market share, joint production, district heating tariffs, production scale, and raw material input cost variables. The results obtained from different estimations indicate clearly that competitive case is not the prevailing one in the Finnish district heating pricing. The market shares of district heating companies had a positive effect on the district heating prices. The result also does not support the hypothesis that different household heat products belong to same heat product markets. (Author)

  2. Effect of cement/wood ratios and wood storage conditions on hydration temperature, hydration time, and compressive strength of wood-cement mixtures

    Science.gov (United States)

    Andy W.C. Lee; Zhongli Hong; Douglas R. Phillips; Chung-Yun Hse

    1987-01-01

    This study investigated the effect of cement/wood ratios and wood storage conditions on hydration temperature, hydration time, and compressive strength of wood-cement mixtures made from six wood species: southern pine, white oak, southern red oak, yellow-poplar, sweetgum, and hickory. Cement/wood ratios varied from 13/1 to 4/1. Wood storage conditions consisted of air-...

  3. The strategic positioning as determining of the future of a furniture industry: education case

    Directory of Open Access Journals (Sweden)

    Cleber da Costa Webber

    2016-12-01

    Full Text Available This case presents a turning-point in the history of the company Expolight, a family company that is several years in the market working in the commercial furniture segment. In the state of Rio Grande do Sul, which is one of the leading furniture manufacturers poles of Brazil, being the products of this region recognized for their high quality. The case presents a decision point where the company needs to choose between keeping their market position, or accept the challenge of a new client, taking into consideration the investments and risks involved. The purpose of this Educational Case is to promote discussion and reflection on topics such as entrepreneurship, strategic management, innovation management and marketing, exercising decision-making based on the data presented. It also has element to the debate on globalization, partnerships and organizational culture.

  4. Knowledge as a Critical Resource in Innovation among Small Furniture Companies in Indonesia: An Exploration

    Directory of Open Access Journals (Sweden)

    Marina van Geenhuizen

    2005-09-01

    Full Text Available The furniture industry makes a significant contribution to the Indonesian economy but is exposed to an intensifying competitive environment and to emerging shortages of raw material. These circumstances have prompted small furniture manufacturers in the district of Jepara to undertake several types of innovation. It appears that of all first ranked innovations, product innovation is the largest category. In the overall pattern of innovations, market innovation and logistics innovation are also important, a situation that can be explained by the typical character and current circumstances of the furniture industry in this area. The innovation process concerned mainly relies on traditional knowledge sources, namely in-house learning-by-doing and experimentation, and buyers (customers. However, the manufacturers show willingness to use other knowledge sources in the near future, particularly more formal and globally oriented ones, such as exhibitions, research institutions, and the Internet. What tends to hamper such progress is that the manufacturers’ capability to access these knowledge sources is limited by financial obstacles and to a smaller extent by complexity and language obstacles. The paper concludes with a few policy recommendations and potential directions of future research. One of the policy recommendations aims at a combination of the traditional way of knowledge generation through in-house learning-by-doing and experimentation with knowledge from modern and formal sources.

  5. Wood pellet seminar

    International Nuclear Information System (INIS)

    Aarniala, M.; Puhakka, A.

    2001-01-01

    The objective of the wood pellet seminar, arranged by OPET Finland and North Karelia Polytechnic, was to deliver information on wood pellets, pellet burners and boilers, heating systems and building, as well as on the activities of wood energy advisors. The first day of the seminar consisted of presentations of equipment and products, and of advisory desks for builders. The second day of the seminar consisted of presentations held by wood pellet experts. Pellet markets, the economy and production, the development of the pellet markets and their problems (in Austria), the economy of heating of real estates by different fuel alternatives, the production, delivery and marketing of wood pellets, the utilization of wood pellet in different utilization sites, the use of wood pellets in detached houses, pellet burners and fireplaces, and conversion of communal real estate houses to use wood pellets were discussed in the presentations. The presentations held in the third day discussed the utilization of wood pellets in power plants, the regional promotion of the production and the use of pellets. The seminar consisted also of visits to pellet manufacturing plant and two pellet burning heating plants

  6. Non-timber forest products marketing systems and market players in southwest Virginia: crafts, medicinal and herbal, and specialty wood products

    Science.gov (United States)

    S.M. Greene; A.L. Hammett; S. Kant

    2000-01-01

    Non-timber forest products (NTFPs) are important in rural southwest Virginia as a source of household income. Marketing system of crafts, medicinal and herbal, and specialty wood products are studied using exploratory and qualitative research methods. Fifty market players at various levels in marketing chains are interviewed to get the information on elements of...

  7. Jackfruit (Artocarpus heterophyllus lamk) wood waste as a textile natural dye by micowave-assisted extraction method

    Science.gov (United States)

    Qadariyah, Lailatul; Gala, Selfina; Widoretno, Dhaniar Rulandri; Kunhermanti, Delita; Bhuana, Donny S.; Sumarno, Mahfud, Mahfud

    2017-05-01

    The development of technology causes most of textile industries in Indonesia prefer to use synthetic dyes in the fabric dyeing process. In fact, synthetic dyes is able to have negative effect since it is is toxic to the health of workers and environment. To resolve this issues, one way to do is to use natural dyes. One of untapped potential in Indonesia is wood waste of jackfruit from furniture industry. Jackfruit wood itself containing dyestuffs which gives yellow color pigment so that it can be used as an alternative source of natural dyes. The purpose of this research is to study the effect of extraction time, mass to solvent volume ratio, and microwave power to yield of dyes. The extract of dye analyzed by UV-Visible Spectrophotometer and GC-MS, along the coloring and endurance tests of natural dyes on fabric and compare it with synthetic dyes. In this research, material is going to be extracted is the wood of jackfruit (Artocarpus heterophyllus lamk) with material size between 35 mesh - 60 mesh. The extraction process is done by using ethanol 96%. Extraction using MAE is carried out at the ratio of materials to solvent of 0,02-0,1 g/mL, the microwave power of 100-800 Watt, and the extraction time of 10-90 minutes. The conclusion is at microwave power of 400 Watt, material to solvent ratio of the 0,02 g/mL, the yield is 3,39% while at microwave power of 600 Watt, material to solvent ratio of the 0,02 g/mL, the yield is 3,67% with extraction time of 30 minutes. The highest recovery from ethanol 96% solvent is 60,41%. The result of UV-Vis Spectrophotometry and GC-MS test show that there is a chromophore compound in the extract of natural dye. The test results show the natural dyes of jackfruit wood can be used to coloring on the textile because it can gives staining result permanently.

  8. Projected wood energy impact on US forest wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Skog, K.E. [USDA Forest Service, Madison, WI (United States)

    1993-12-31

    The USDA Forest Service has developed long-term projections of wood energy use as part of a 1993 assessment of demand for and supply of resources from forest and range lands in the United States. To assess the impact of wood energy demand on timber resources, a market equilibrium model based on linear programming was developed to project residential, industrial, commercial, and utility wood energy use from various wood energy sources: roundwood from various land sources, primary wood products mill residue, other wood residue, and black liquor. Baseline projections are driven by projected price of fossil fuels compared to price of wood fuels and the projected increase in total energy use in various end uses. Wood energy use is projected to increase from 2.67 quad in 1986 to 3.5 quad in 2030 and 3.7 quad in 2040. This is less than the DOE National Energy Strategy projection of 5.5 quad in 2030. Wood energy from forest sources (roundwood) is projected to increase from 3.1 billion (10{sup 9}) ft{sup 3} in 1986 to 4.4. billion ft{sup 3} in 2030 and 4.8 billion ft{sup 3} in 2040 (88, 124 and 136 million m{sup 3}, respectively). This rate of increase of roundwood use for fuel -- 0.8 percent per year -- is virtually the same as the projected increase rate for roundwood for pulpwood. Pulpwood roundwood is projected to increase from 4.2 billion ft{sup 3} in 1986 to 6.0 billion ft{sup 3} in 2030 and 6.4 billion ft{sup 3} in 2040 (119, 170 and 183 million m{sup 3}, respectively).

  9. Associations between flame retardant applications in furniture foam, house dust levels, and residents' serum levels.

    Science.gov (United States)

    Hammel, Stephanie C; Hoffman, Kate; Lorenzo, Amelia M; Chen, Albert; Phillips, Allison L; Butt, Craig M; Sosa, Julie Ann; Webster, Thomas F; Stapleton, Heather M

    2017-10-01

    Polyurethane foam (PUF) in upholstered furniture frequently is treated with flame retardant chemicals (FRs) to reduce its flammability and adhere to rigorous flammability standards. For decades, a commercial mixture of polybrominated diphenyl ethers (PBDEs) called PentaBDE was commonly applied to foam to fulfill these regulations; however, concerns over toxicity, bioaccumulation, and persistence led to a global phase-out in the mid-2000s. Although PentaBDE is still detected in older furniture, other FR compounds such as tris(1,3-dichloroisopropyl) phosphate (TDCIPP) and Firemaster® 550 (FM550) have been increasingly used as replacements. While biomonitoring studies suggest exposure is widespread, the primary sources of exposure are not clearly known. Here, we investigated the relationships between specific FR applications in furniture foam and human exposure. Paired samples of furniture foam, house dust and serum samples were collected from a cohort in North Carolina, USA and analyzed for FRs typically used in PUF. In general, the presence of a specific FR in the sofa of a home was associated with an increase in the concentration of that FR in house dust. For example, the presence of PentaBDE in sofas was associated with significantly higher levels of BDE-47, a major component of PentaBDE, in house dust (10 β =6.4, phouse dust when FM550 was identified in the sofa foam (p<0.01). These relationships were modified by dust loading rates in the living room and the ratio of sofa size to room size. Interestingly, levels of TDCIPP and tris(1-chloro-2-isopropyl) phosphate (TCIPP) were also higher in dust with detections in sofa foam; however, these associations were not statistically significant and may suggest there are other prominent sources of these compounds in the home. In addition, the presence of PentaBDE in sofa foam was associated with significantly higher levels of BDE-47 in serum (p<0.01). These results suggest that FR applications in sofas are likely major

  10. The Importance of Methodology Evaluation of School Furniture for Czech Children with Mobility Disability in Relation to Children’s Anthropometry

    Directory of Open Access Journals (Sweden)

    Martin Zach

    2014-01-01

    Full Text Available The paper presents results of research conducted under the support of the IGA LDF MENDELU project, id. No. 32/2010 (Anthropometry in Disabled Children in Relation to Furniture and the NIS MPO ČR FR-TI1/050 project (Information System for the Support of Research, Development, Innovation and Furniture Quality. It gives an account of theoretical and methodological foundations, introduces the project’s research objectives. Its major objective is to familiarise professional public with the results of the conducted research the focus of which was to determine requirements for furniture designated for children with mobility restrictions. The defined requirements then constitute the grounds of school furniture assessment methodology. These requirements are divided into three levels that are somehow interconnected. Application of the methodology as a whole is highly wide and can be directed at all educational institutions in the Czech Republic with the pupils from the target group. The evaluation outcome is a report of each evaluated product. The questions raised also belong to a broader context of the issue at hand, related to the project of protection and safety standards establishment in relation to health status of children and youth, in the context of the “Long-term programme of the improvement of health status of the Czech Republic population – Health for everybody in the 21st century” paper, objective 4: HEALTH OF YOUTH – TO BUILD CONDITIONS FOR YOUNG PEOPLE TO BECOME HEALTHIER AND APTER TO FULFILL THEIR ROLE IN THE SOCIETY BY 2020. It is recommended to make a proper definition of the dimensional characteristics of children and update their measurements for furniture design in the Czech Republic constantly (including revision of technical regulations and innovation dimensions in the literature. This can be considered as an opportunity to improve the health of future generations.

  11. The study of postural workload in assembly of furniture upholstery

    OpenAIRE

    Marek Lasota Andrzej; Hankiewicz Krzysztof

    2017-01-01

    The productivity of the workers is affected by the Work-related Musculoskeletal Disorders (WRMSDs) which common cause of health problems, sick leave and it can result in decreased quality of work and increased absenteeism. The objective of this study is to evaluate and investigate the postural workload of sewing machine operators in the assembly of upholstery in furniture factory by using the Ovako Working Posture Analysing System (OWAS) with sampling. The results indicated that posture code ...

  12. Reconstruction of Furniture Production as Potential and Reputable Intellectual Property Rights (IPR Creative Design Model

    Directory of Open Access Journals (Sweden)

    husen hendriyana

    2017-10-01

    Full Text Available Along with recent rapid development of science, technology, art and culture, through research institutions from the central to the local level, the government seriously activates enhancement and protection of the intellectual products of the nation. Such as protection of intellectual property rights against irresponsible plagiarism. This is due to that the appearance, process, or invention steps of the creative furniture designer in the society or in the academic environment have the potential and the opportunity to be registered as Intellectual Properties (IP or gain Intellectual Property Rights (IPR. Besides aiming to lift up the state or institutions achievement and attainment of intellectual property rights internationally, the added value also can be developed in the direction of economic upgrade. Research on furniture products designs have been numerously carried out with various objects and cases, yet the diversity of the subject character and creative processes still have not well defined so they enrich the model of creative process design. This study aims to identify, classify and formulate a potential furniture design model of creative process and IPR standard, through methods PAR. The results of this study are (1 prototype of furniture design products, (2 the creative process model and the construction methods process of furniture design with a concept or a specific theme; (3 Registration of IPR; (4 Scientific manuscript. Seiring dengan perkembangan ilmu pengetahuan, teknologi, seni dan budaya yang marak dewasa ini, melalui lembaga penelitian dari tingkat pusat sampai ketingkat daerah, pemerintah semakin serius menggalangkan peningkatan dan perlindungan terhadap produk intelektual anak bangsa. Salah satu contoh di antaranya adalah perlindungan terhadap hak kekayaan intelektual dari perilaku plagiarism yang tidak bertanggung jawab. Hal ini tiada lain bahwa, bentuk, proses, maupun invention steps dari para pelaku kreatif desain mebel

  13. A new look at the forest industry and global warming

    International Nuclear Information System (INIS)

    Atkinson, W.

    2000-01-01

    The relationship between cutting and replanting a climax forest and the control of carbon dioxide emission is examined. The result is a new interpretation which suggests that cutting and replanting of mature trees may actually benefit the environment, provided that the wood goes to long-lasting uses such as houses or furniture. The new interpretation rests on the concept of carbon sequestration technology, or sucking carbon away from the air where it cannot turn up the heat. It is suggested that when an old-growth forest is harvested, its 'carbon tank' is emptied. Second-growth stands that arise to replace the old-growth will bind carbon for several hundred years, until carbon equilibrium is re-established. If the wood produced from harvesting the old-growth forest goes to short-term uses such as for example toilet paper, the carbon locked up in the wood will return to the atmosphere within a matter of a few weeks, with the result that there is no net removal of carbon dioxide. However, if the harvested wood is used to produce houses or furniture (i.e. long-term uses, estimated at 65-70 years) the wood will continue to function as a carbon sink, the carbon will remain locked away from the air, while the replacement saplings trap and bind new carbon. Even after the 65-70 years life expectancy as a house or furniture the wood, at the expected decay rate of three per cent or less per year in an anaerobic landfill, the wood will not release all its stored carbon for a century or more, hence the result is a net removal of atmospheric carbon dioxide. Alternatively, wood from a demolished house could be used as feedstock for generating engine fuels such as methanol. The release of carbon dioxide to the atmosphere would be no greater than allowing the wood to decay naturally. Converted to methanol, it would displace its BTU equivalent in fossil fuels

  14. Energy consumptions of households in 2012

    International Nuclear Information System (INIS)

    Denjean, Mathias

    2015-06-01

    Based on results of a survey, this publication comments data presented under the form of tables and graphs and related to the energy consumption by French households during 2012. It addresses expenses and consumptions for individual housing and for a flat in collective building, analyses the energy consumption with respect to surface in the case of individual housing, discusses the influence of dwelling age on consumption, the influence of geographical location in France, the influence o the residence status (owner or renter), and the influence of dwelling occupation (hours per day), and the distribution of the type of consumed energy (electricity, gas, oil, LPG, wood, other) and the money spent on these different energies. The type of energy is also related to the residence status, to the housing type (house or flat), to the flat surface, to the housing type and age, to the geographical location

  15. Finishing of wood

    Science.gov (United States)

    R. Sam Williams

    1999-01-01

    The primary function of any wood finish (paint, varnish, and stain, for example) is to protect the wood surface, help maintain a certain appearance, and provide a cleanable surface. Although wood can be used both outdoors and indoors without finishing, unfinished wood surfaces exposed to the weather change color, are roughened by photodegradation and surface checking,...

  16. Wood construction and magnetic characteristics of impregnated type magnetic wood

    International Nuclear Information System (INIS)

    Oka, Hideo; Hojo, Atsushi; Seki, Kyoushiro; Takashiba, Toshio

    2002-01-01

    The results of experiments involving the AC and DC magnetic characteristics of impregnated type magnetic wood were studied by taking into consideration the wood construction and fiber direction. The experimental results show that the sufficient amount of impregnated magnetic fluid varies depending on the fiber direction and length, and the grain face of the wood material. The impregnated type magnetic wood sample that is fully impregnated by magnetic fluid has a 60% saturation magnetization compared to the saturation magnetization of magnetic fluid. Samples for which the wood fiber direction was the same as the direction of the magnetic path had a higher magnetization intensity and permeability

  17. Relacionamento, cooperação e governança em arranjos produtivos locais: o caso do APL de madeira e móveis do estado de Rondônia Relations, cooperation and governance in local production arrangements: the case of APL wooden furniture and state Rondônia

    Directory of Open Access Journals (Sweden)

    Marcia Cristina Teixeira

    2011-04-01

    Full Text Available Este estudo tem por objetivo identificar os agentes econômicos e institucionais do arranjo produtivo local APL de madeira e móveis do Estado de Rondônia e analisar suas formas de relacionamento, cooperação e governança. Foram utilizados os procedimentos metodológicos relativos ao estudo de caso, com a adoção de uma perspectiva de análise transversal. O nível de análise considerado foi o APL e a unidade de análise foram os gestores tanto das empresas quando das instituições envolvidas. A população abrangida na pesquisa somou trinta e cinco organizações integrantes do arranjo produtivo local de madeira e móveis de Rondônia, das quais vinte e quatro foram visitadas e seus dirigentes, entrevistados. Para a realização da pesquisa, foram utilizados dados primários, coletados por meio de entrevistas semi-estruturadas e observação direta não-participante do pesquisador, além de dados secundários. Os resultados levam a concluir que o APL de madeira e móveis do Estado de Rondônia ainda não existe como um arranjo propriamente dito, mas sim como três subgrupos com estágios diferentes em seus laços de cooperação. A colaboração foi percebida dentro de um dos subgrupos, tornando as empresas participantes mais bem preparadas e capacitadas. Portanto, o desafio é entender esse APL com necessidades e capacidades diferentes, onde as empresas se encontram em diferentes estágios de desenvolvimento.This research had as objective to identify economic and institutional agents of Rondônia wood and furniture cluster and analyze its relationship, cooperation and governance. The methodological approach were the case study, with the adoption of a perspective of transversal analysis. The analysis level was the cluster and the analysis unit were the cluster and institutional management. The population was of thirty-five participant organizations of the wood and furniture cluster of Rondônia and, from those, twenty-four were visited

  18. An integrated approach for developing a technology strategy framework for small- to medium-sized furniture manufacturers to improve competitiveness

    Directory of Open Access Journals (Sweden)

    Lourens, A.S.

    2013-05-01

    Full Text Available Low-technology firms, such as those found within the furniture manufacturing industry, have no framework or methodology to guide them successfully to acquire and integrate technology that enables them to operate more competitively. The aim of this article is to illustrate the development of a technology strategy framework for small- to medium-sized furniture manufacturers to assist them to improve their competitiveness. More specifically, this article presents an integrated technology strategy framework that enables management to integrate their business strategy with their technology requirements successfully, thus improving competitiveness.

  19. Survey on the differentiation of consumption in various types of automatic wood burners

    International Nuclear Information System (INIS)

    Primas, A.; Kistler, M.; Kessler, F.

    2006-01-01

    This final report published by the Swiss Federal Office of Energy (SFOE) takes a look at how statistics on wood-consumption can be differentiated to take various types of wood-fired heating systems into consideration. The approach used, which involved the taking of 1200 random samples from a total of 5200 installations, is described. Figures are presented on the return-quotients reached. The questionnaires returned were sorted according to the types of installation, such as industrial/commercial, farming, services and household. As a result of the high return-rate, the accuracy of the estimates based on the data is also considered to be high. The paper describes how the survey was made and how the results were obtained from the data collected. Details on operation, types of fuel, specific consumption and factors influencing operation are presented in graphical form. An appendix presents the data collected in tabular form

  20. Learner Support Requirements for Online Workplace Training in the South African Furniture Industry

    Science.gov (United States)

    MacDonald, Iain S.; Bullen, Mark; Kozak, Robert A.

    2010-01-01

    A qualitative research project was conducted to evaluate the suitability of e-learning as a means of delivering training to workplace learners in the South African furniture manufacturing sector. Twenty learners participated in a three-month pilot e-learning course and were monitored throughout. While the study was designed primarily to…