WorldWideScience

Sample records for wood carbonization systems

  1. Wood - a carbon depot

    OpenAIRE

    Lipušček, Igor; Tišler, Vesna

    2003-01-01

    The article examines the global movement of carbon dioxide, the most important greenhouse gas due to its large quantities. We studied the carbon cycle with possibilities of its extension, and analysed the mechanisms that remove carbon dioxide from the atmosphere and bind it into solid substances for a longer period of time. The focus was on carbon dioxide sink into biomass and carbon deposit in wood. On the basis of wood component data and chemical analysis of the components, we calculated th...

  2. Carbon Sequestration via Wood Burial

    Science.gov (United States)

    Zeng, N.

    2007-12-01

    To mitigate global climate change, a portfolio of strategies will be needed to keep the atmospheric CO2 concentration below a dangerous level. Here a carbon sequestration strategy is proposed in which forest dead wood or old trees are harvested via collection or selective cutting, then buried in trenches or stowed away in above-ground shelters. The largely anaerobic condition under a sufficiently thick layer of soil will prevent the decomposition of the buried wood. Because a large flux of CO2 is constantly being assimilated into the world's forests via photosynthesis, cutting off its return pathway to the atmosphere forms an effective carbon sink. It was estimated that the carbon sequestration potential of forest wood harvest and burial is 10GtC y-1 with an uncertainty range of 5-15 GtC y-1. Based on data from North American logging industry, the cost was crudely estimated at $50/tC, significantly lower than the cost for power plant CO2 capture with geological storage, a carbon sequestration technique currently under most serious consideration. The low cost is largely because the CO2 capture is achieved at little cost by the natural process of photosynthesis. The technique is low tech, distributed, safe and can be stopped or reversed at any time. The relatively low cost may soon be competitive enough for large-scale implementation in a world-wide carbon trading market. In tropical regions with ongoing deforestation, wood burial instead of burning will immediately reduce that portion of the anthropogenic CO2 emission.

  3. Carbon sequestration via wood burial

    Directory of Open Access Journals (Sweden)

    Zeng Ning

    2008-01-01

    Full Text Available Abstract To mitigate global climate change, a portfolio of strategies will be needed to keep the atmospheric CO2 concentration below a dangerous level. Here a carbon sequestration strategy is proposed in which certain dead or live trees are harvested via collection or selective cutting, then buried in trenches or stowed away in above-ground shelters. The largely anaerobic condition under a sufficiently thick layer of soil will prevent the decomposition of the buried wood. Because a large flux of CO2 is constantly being assimilated into the world's forests via photosynthesis, cutting off its return pathway to the atmosphere forms an effective carbon sink. It is estimated that a sustainable long-term carbon sequestration potential for wood burial is 10 ± 5 GtC y-1, and currently about 65 GtC is on the world's forest floors in the form of coarse woody debris suitable for burial. The potential is largest in tropical forests (4.2 GtC y-1, followed by temperate (3.7 GtC y-1 and boreal forests (2.1 GtC y-1. Burying wood has other benefits including minimizing CO2 source from deforestation, extending the lifetime of reforestation carbon sink, and reducing fire danger. There are possible environmental impacts such as nutrient lock-up which nevertheless appears manageable, but other concerns and factors will likely set a limit so that only part of the full potential can be realized. Based on data from North American logging industry, the cost for wood burial is estimated to be $14/tCO2($50/tC, lower than the typical cost for power plant CO2 capture with geological storage. The cost for carbon sequestration with wood burial is low because CO2 is removed from the atmosphere by the natural process of photosynthesis at little cost. The technique is low tech, distributed, easy to monitor, safe, and reversible, thus an attractive option for large-scale implementation in a world-wide carbon market.

  4. Wood frame systems for wood homes

    Directory of Open Access Journals (Sweden)

    Julio Cesar Molina

    2010-12-01

    Full Text Available The use of constructive systems that combine strength, speed, with competitive differential techniques and mainly, compromising with the environment, is becoming more popular in Brazil. The constructive system in wood frame for houses of up to five stories is very interesting, because it is a light system, structured in reforested treated wood which allows the combination of several materials, besides allowing speed in the construction and total control of the expenses already in the project phase for being industrialized. The structural behavior of the wood frame is superior to the structural masonry in strength, thermal and acoustic comfort. However, in Brazil, the wood frame is still little known and used, due to lack of technical knowledge about the system, prejudice associated the bad use of the wood as construction material, or still, in some cases, lack of normalization. The aim of this manuscript consists of presenting the main technical characteristics and advantages of the constructive system in wood frame homes, approaching the main stages of the constructive process through examples, showing the materials used in the construction, in addition the main international normative recommendations of the project. Thus, this manuscript also hopes to contribute to the popularization of the wood frame system in Brazil, since it is a competitive, fast and ecologically correct system. Moreover, nowadays, an enormous effort of the technical, commercial and industrial section has been accomplished for the development of this system in the country.

  5. Wood-burning stoves in low-carbon dwellings

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo; Jensen, Ole Michael; Afshari, Alireza

    2013-01-01

    The European climate change strategy intends to encourage the erection of low-carbon buildings and the upgrading of existing buildings to low-carbon level. At the same time, it is an EU vision to maximise the use of renewable energy resources. In this strategy, small-scale wood-burning is an over......The European climate change strategy intends to encourage the erection of low-carbon buildings and the upgrading of existing buildings to low-carbon level. At the same time, it is an EU vision to maximise the use of renewable energy resources. In this strategy, small-scale wood......-burning is an overlooked source for heating. A wood-burning stove is considered low-carbon technology since its fuel is based on local residual biomass. A field study investigating how modern wood-burning stoves operated in modern single-family houses showed that intermittent heat supply occasionally conflicted...... with the primary heating system and that chimney exhaust occasionally conflicted with the ventilation system causing overheating and particles in the indoor environment. Nonetheless, most of the wood-burning stoves contributed considerably to the total heating. On this background, it was concluded that better...

  6. Production and characterization of carbon structures derived from wood

    Science.gov (United States)

    Xie, Xinfeng

    The objective of this research was to produce structural carbon materials from wood, a renewable biomaterial, for advanced material application. A broad range of materials were produced for study including carbonized wood, resin infused carbon composites made from carbonized wood, and carbon nanotubes from wood fibers. The effect of slow heating on the properties of carbonized wood was studied and important carbonized wood properties were found to be produced over a range of heating rates and peak temperatures. Slow heating rates promoted the formation and growth of graphene sheets in turbostratic crystallites, which had a significant influence on the electrical resistivity and Young's modulus of the carbonized wood. A reduction in the rate of heating may be beneficial with respect to carbon properties and the prevention of crack production during the manufacture of large monolithic carbon specimens from wood and wood-based materials. Investigation of selected physical and mechanical properties of resin-infused porous carbon composites made from medium density fiberboard demonstrated that the infused material can be used in specific applications, where high mechanical strength is not required but high dimensional stability at elevated-use temperatures, fire safety, or static dissipation and shielding is required. A unique cyclic heating process has been developed to produce carbon nanotubes directly from wood fibers. Study on the oxidative behavior of carbons derived from cellulose and lignin showed that cellulose carbon ablates faster at a lower temperature in air than lignin carbon when they were prepared at temperatures lower than 500°C due to cellulose carbon's lower content of aromatic structures. It is hypothesized that the formation of carbon nanotubes during the cyclic heating process occurred via template synthesis, with the nanochannels formed from the ablation of cellulose fibrils functioning as a template. Evidence of formation of nanochannels has been

  7. Aspen SUCROSE TRANSPORTER3 allocates carbon into wood fibers.

    Science.gov (United States)

    Mahboubi, Amir; Ratke, Christine; Gorzsás, András; Kumar, Manoj; Mellerowicz, Ewa J; Niittylä, Totte

    2013-12-01

    Wood formation in trees requires carbon import from the photosynthetic tissues. In several tree species, including Populus species, the majority of this carbon is derived from sucrose (Suc) transported in the phloem. The mechanism of radial Suc transport from phloem to developing wood is not well understood. We investigated the role of active Suc transport during secondary cell wall formation in hybrid aspen (Populus tremula × Populus tremuloides). We show that RNA interference-mediated reduction of PttSUT3 (for Suc/H(+) symporter) during secondary cell wall formation in developing wood caused thinner wood fiber walls accompanied by a reduction in cellulose and an increase in lignin. Suc content in the phloem and developing wood was not significantly changed. However, after (13)CO2 assimilation, the SUT3RNAi lines contained more (13)C than the wild type in the Suc-containing extract of developing wood. Hence, Suc was transported into developing wood, but the Suc-derived carbon was not efficiently incorporated to wood fiber walls. A yellow fluorescent protein:PttSUT3 fusion localized to plasma membrane, suggesting that reduced Suc import into developing wood fibers was the cause of the observed cell wall phenotype. The results show the importance of active Suc transport for wood formation in a symplasmically phloem-loading tree species and identify PttSUT3 as a principal transporter for carbon delivery into secondary cell wall-forming wood fibers.

  8. Effects of a dehydrating agent on the carbonization of wood

    Science.gov (United States)

    Kim, Dae-Young; Kang, Kyu-Young

    2012-05-01

    The carbonization of sulfuric acid impregnated wood meal and wood block was studied by using thermogravimetry (TG) and scanning electron microscopy (SEM). The samples were carbonized up to 800 °C at a heating rate of 10 °C/min under nitrogen. Improvement of the char yield was observed to be similar to the case of cellulose. Without sulfuric acid impregnation, the wood blocks significantly shrank on carbonization, and the shrinkage was strongly anisotropic. The degree of shrinkage was in the order of tangential > radial > longitudinal directions. Sulfuric acid impregnated wood blocks largely retained the size and cell wall morphology. The nitrogen adsorption surface area of wood meal char prepared with sulfuric acid impregnation was greater than that of the control. Thus, the carbonization of wood with sulfuric acid impregnation was found to be advantageous in mass yield and preservation of size and shape.

  9. The Carbon Impacts of Wood Products

    Science.gov (United States)

    Richard Bergman; Maureen Puettmann; Adam Taylor; Kenneth E. Skog

    2014-01-01

    Wood products have many environmental advantages over nonwood alternatives. Documenting and publicizing these merits helps the future competitiveness of wood when climate change impacts are being considered. The manufacture of wood products requires less fossil fuel than nonwood alternative building materials such as concrete, metals, or plastics. By nature, wood is...

  10. Estimating Terrestrial Wood Biomass from Observed Concentrations of Atmospheric Carbon Dioxide

    NARCIS (Netherlands)

    Schaefer, K. M.; Peters, W.; Carvalhais, N.; van der Werf, G.; Miller, J.

    2008-01-01

    We estimate terrestrial disequilibrium state and wood biomass from observed concentrations of atmospheric CO2 using the CarbonTracker system coupled to the SiBCASA biophysical model. Starting with a priori estimates of carbon flux from the land, ocean, and fossil fuels, CarbonTracker estimates net

  11. Life Cycle Analysis of Carbon Flow and Carbon Footprint of Harvested Wood Products of Larix principis-rupprechtii in China

    OpenAIRE

    Fei Lun; Moucheng Liu; Dan Zhang; Wenhua Li; Junguo Liu

    2016-01-01

    Larix principis-rupprechtii is a native tree species in North China with a large distribution; and its harvested timbers can be used for producing wood products. This study focused on estimating and comparing carbon flows and carbon footprints of different harvested wood products (HWPs) from Larix principis-ruppechtii based on the life cycle analysis (from seedling cultivation to HWP final disposal). Based on our interviews and surveys, the system boundary in this study was divided into three...

  12. Catalytic carbonization of wood charcoal : graphite or diamond?

    NARCIS (Netherlands)

    Hata, T; Vystavel, T; Bronsveld, P; DeHosson, J; Kikuchi, H; Nishimiya, K; Imamura, Y

    2004-01-01

    We report on the process of making graphite out of wood by catalytic carbonization. Two different types of microstructure were observed. One type being typical for graphitization of wood without the effect of a catalyst, the main characteristic being the typical fibrillar microstructure related back

  13. Formation of silicon carbide nanorods from wood-based carbons

    NARCIS (Netherlands)

    Hata, T; Castro, [No Value; Fujisawa, M; Imamura, Y; Bonnamy, S; Bronsveld, P; Kikuchi, H

    2005-01-01

    Man-made ceramic wood similar to petrified wood found in nature can be used at high temperature as the high oxidation rate of carbon above 500 degrees C is suppressed by a mu m thin SiC coating similar to the shuttle's heat shield. Possible applications are in the field of energy production, e.g.,

  14. Amazons woods carbonization; Carbonizacao de madeiras da Amazonia

    Energy Technology Data Exchange (ETDEWEB)

    Pastore, T.C.M.; Okino, E.Y.A.; Pastore Junior, F. [Instituto Brasileiro de Desenvolvimento Florestal, Brasilia, DF (Brazil)

    1987-12-31

    It was made charcoal, in laboratory at 450 deg C, from wood of twenty species naturally occurring in Tapajos National Forest, Pa. Besides the weight yield it was determined the calorific value, the density and percentage of fixed carbon ashes and volatile matter of the charcoal produced. These were correlated with the specific gravity, and the lignin and alcohol-benzene extractive of the respective woods.Thirteen species presented weight yield more then 30%, among then Cuiarama and Ucuubarana showed 37% and 35% respectively. The species Quaruba-verdadeira presented the uncommon value of 86% of fixed carbon. (author). 8 refs., 2 figs., 3 tabs

  15. Microstructural study of carbonized wood after cell wall sectioning

    NARCIS (Netherlands)

    Ishimaru, Kengo; Hata, Toshimitsu; Bronsveld, Paul; Imamura, Yuji

    Wooden blocks of Japanese cedar (Cryptomeria japonica) were carbonized at 700 and 1,800 degrees C. The microstructure was analyzed by transmission electron microscopy (TEM) and mu-Raman spectroscopy of the inner planes of wood cell walls. The predominant structure was of a turbostratic nature and no

  16. Synthesis of carbon-encapsulated metal nanoparticles from wood char

    Science.gov (United States)

    Yicheng Du; Chuji Wang; Hossein Toghiani; Zhiyong Cai; Xiaojian Liu; Jilei Zhang; Qiangu Yan

    2010-01-01

    Carbon-encapsulated metal nanoparticles were synthesized by thermal treatment of wood char, with or without transition metal ions pre-impregnated, at 900ºC to 1,100ºC. Nanoparticles with concentric multilayer shells were observed. The nanoparticles were analyzed by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction...

  17. Life Cycle Analysis of Carbon Flow and Carbon Footprint of Harvested Wood Products of Larix principis-rupprechtii in China

    Directory of Open Access Journals (Sweden)

    Fei Lun

    2016-03-01

    Full Text Available Larix principis-rupprechtii is a native tree species in North China with a large distribution; and its harvested timbers can be used for producing wood products. This study focused on estimating and comparing carbon flows and carbon footprints of different harvested wood products (HWPs from Larix principis-ruppechtii based on the life cycle analysis (from seedling cultivation to HWP final disposal. Based on our interviews and surveys, the system boundary in this study was divided into three processes: the forestry process, the manufacturing process, and the use and disposal process. By tracking carbon flows of HWPs along the entire life cycle, we found that, for one forest rotation period, a total of 26.81 tC/ha sequestered carbon was transferred into these HWPs, 66.2% of which were still stored in the HWP when the rotation period had ended; however, the HWP carbon storage decreased to 0.25 tC/ha (only 0.9% left in the 100th year after forest plantation. The manufacturing process contributed more than 90% of the total HWP carbon footprint, but it was still smaller than the HWP carbon storage. In terms of the carbon storage and the carbon footprint, construction products had the largest net positive carbon balance compared to furniture and panel products. In addition, HWP are known to have a positive impact on global carbon mitigation because they can store parts of the sequestered carbon for a certain period of time and they have a substitution effect on carbon mitigation. Furthermore, there still exist great opportunities for carbon mitigation from HWPs through the use of cleaner energy and increasing the utilization efficiency of wood fuel.

  18. Monitoring of carbon monoxide in residences with bulk wood pellet storage in the Northeast United States.

    Science.gov (United States)

    Rossner, Alan; Jordan, Carolyn E; Wake, Cameron; Soto-Garcia, Lydia

    2017-10-01

    The interest in biomass fuel is continuing to expand globally and in the northeastern United States as wood pellets are becoming a primary source of fuel for residential and small commercial systems. Wood pellets for boilers are often stored in basement storage rooms or large bag-type containers. Due to the enclosed nature of these storage areas, the atmosphere may exhibit increased levels of carbon monoxide. Serious accidents in Europe have been reported over the last decade in which high concentrations of carbon monoxide (CO) have been found in or near bulk pellet storage containers. The aim of this study was to characterize the CO concentrations in areas with indoor storage of bulk wood pellets. Data was obtained over approximately 7 months (December 2013 to June 2014) at 25 sites in New Hampshire and Massachusetts: 16 homes using wood pellet boilers with indoor pellet storage containers greater than or equal to 3 ton capacity; 4 homes with wood pellet heating systems with outdoor pellet storage; 4 homes using other heating fuels; and a university laboratory site. CO monitors were set up in homes to collect concentrations of CO in the immediate vicinity of wood pellet storage containers, and data were then compared to those of homes using fossil fuel systems. The homes monitored in this study provided a diverse set of housing stock spanning two and a half centuries of construction, with homes built from 1774 to 2013, representing a range of air exchange rates. The CO concentration data from each home was averaged hourly and then compared to a threshold of 9 ppm. While concentrations of CO were generally low for the homes studied, the need to properly design storage locations for pellets is and will remain a necessary component of wood pellet heating systems to minimize the risk of CO exposure. This paper is an assessment of carbon monoxide (CO) exposure from bulk wood pellet storage in homes in New Hampshire and Massachusetts. Understanding the CO concentrations

  19. Forest and wood products role in carbon sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Sampson, R.N.

    1997-12-31

    An evaluation of the use of U.S. forests and forest products for carbon emission mitigation is presented. The current role of forests in carbon sequestration is described in terms of regional differences and forest management techniques. The potential for increasing carbon storage by converting marginal crop and pasture land, increasing timberland growth, reducing wildfire losses, and changing timber harvest methods is examined. Post-harvest carbon flows, environmental impacts of wood products, biomass energy crops, and increased use of energy-conserving trees are reviewed for their potential in reducing or offsetting carbon emissions. It is estimated that these techniques could offset 20 to 40 percent of the carbon emitted annually in the U.S. 39 refs., 5 tabs.

  20. Simulated long-term effects of varying tree retention on wood production, dead wood and carbon stock changes.

    Science.gov (United States)

    Santaniello, Francesca; Djupström, Line B; Ranius, Thomas; Weslien, Jan; Rudolphi, Jörgen; Sonesson, Johan

    2017-10-01

    Boreal forests are an important source of timber and pulp wood, but provide also other products and services. Utilizing a simulation program and field data from a tree retention experiment in a Scots pine forest in central Sweden, we simulated the consequences during the following 100 years of various levels of retention on production of merchantable wood, dead wood input (as a proxy for biodiversity), and carbon stock changes. At the stand level, wood production decreased with increased retention levels, while dead wood input and carbon stock increased. We also compared 12 scenarios representing a land sharing/land sparing gradient. In each scenario, a constant volume of wood was harvested with a specific level of retention in a 100-ha landscape. The area not needed to reach the defined volume was set-aside during a 100-year rotation period, leading to decreasing area of set-asides with increasing level of retention across the 12 scenarios. Dead wood input was positively affected by the level of tree retention whereas the average carbon stock decreased slightly with increasing level of tree retention. The scenarios will probably vary in how they favor species preferring different substrates. Therefore, we conclude that a larger variation of landscape-level conservation strategies, also including active creation of dead wood, may be an attractive complement to the existing management. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Wood phenology, not carbon input, controls the interannual variability of wood growth in a temperate oak forest.

    Science.gov (United States)

    Delpierre, Nicolas; Berveiller, Daniel; Granda, Elena; Dufrêne, Eric

    2016-04-01

    Although the analysis of flux data has increased our understanding of the interannual variability of carbon inputs into forest ecosystems, we still know little about the determinants of wood growth. Here, we aimed to identify which drivers control the interannual variability of wood growth in a mesic temperate deciduous forest. We analysed a 9-yr time series of carbon fluxes and aboveground wood growth (AWG), reconstructed at a weekly time-scale through the combination of dendrometer and wood density data. Carbon inputs and AWG anomalies appeared to be uncorrelated from the seasonal to interannual scales. More than 90% of the interannual variability of AWG was explained by a combination of the growth intensity during a first 'critical period' of the wood growing season, occurring close to the seasonal maximum, and the timing of the first summer growth halt. Both atmospheric and soil water stress exerted a strong control on the interannual variability of AWG at the study site, despite its mesic conditions, whilst not affecting carbon inputs. Carbon sink activity, not carbon inputs, determined the interannual variations in wood growth at the study site. Our results provide a functional understanding of the dependence of radial growth on precipitation observed in dendrological studies. © 2015 The Authors. New Phytologist © 2015 New Phytologist Trust.

  2. Wood combustion systems: status of environmental concerns

    Energy Technology Data Exchange (ETDEWEB)

    Dunwoody, J.E.; Takach, H.; Kelley, C.S.; Opalanko, R.; High, C.; Fege, A.

    1980-01-01

    This document addresses the uncertainties about environmental aspects of Wood Combustion Systems that remain to be resolved through research and development. The resolution of these uncertainties may require adjustments in the technology program before it can be commercialized. The impacts and concerns presented in the document are treated generically without reference to specific predetermined sites unless these are known. Hence, site-specific implications are not generally included in the assessment. The report consists of two main sections which describe the energy resource base involved, characteristics of the technology, and introduce the environmental concerns of implementing the technology; and which review the concerns related to wood combustion systems which are of significance for the environment. It also examines the likelihood and consequence of findings which might impede wood commercialization such as problems and uncertainties stemming from current or anticipated environmental regulation, or costs of potential environmental controls. This document is not a formal NEPA document. Appropriate NEPA documentation will be prepared after a formal wood combustion commercialization program is approved by DOE.

  3. Light absorption by organic carbon from wood combustion

    Science.gov (United States)

    Chen, Y.; Bond, T. C.

    2010-02-01

    Carbonaceous aerosols affect the radiative balance of the Earth by absorbing and scattering light. While black carbon (BC) is highly absorbing, some organic carbon (OC) also has significant absorption, especially at near-ultraviolet and blue wavelengths. To the extent that OC absorbs visible light, it may be a non-negligible contributor to positive direct aerosol radiative forcing. Quantification of that absorption is necessary so that radiative-transfer models can evaluate the net radiative effect of OC. In this work, we examine absorption by primary OC emitted from solid fuel pyrolysis. We provide absorption spectra of this material, which can be related to the imaginary refractive index. This material has polar character but is not fully water-soluble: more than 92% was extractable by methanol or acetone, compared with 73% for water and 52% for hexane. Water-soluble OC contributes to light absorption at both ultraviolet and visible wavelengths. However, a larger portion of the absorption comes from OC that is extractable only by methanol. Absorption spectra of water-soluble OC are similar to literature reports. We compare spectra for material generated with different wood type, wood size and pyrolysis temperature. Higher wood temperature is the main factor creating OC with higher absorption; changing wood temperature from a devolatilizing state of 210 °C to a near-flaming state of 360 °C causes about a factor of four increase in mass-normalized absorption at visible wavelengths. A clear-sky radiative transfer model suggests that, despite the absorption, both high-temperature and low-temperature OC result in negative top-of-atmosphere radiative forcing over a surface with an albedo of 0.19 and positive radiative forcing over bright surfaces. Unless absorption by real ambient aerosol is higher than that measured here, it probably affects global average clear-sky forcing very little, but could be important in energy balances over bright surfaces.

  4. Light absorption by organic carbon from wood combustion

    Directory of Open Access Journals (Sweden)

    Y. Chen

    2010-02-01

    Full Text Available Carbonaceous aerosols affect the radiative balance of the Earth by absorbing and scattering light. While black carbon (BC is highly absorbing, some organic carbon (OC also has significant absorption, especially at near-ultraviolet and blue wavelengths. To the extent that OC absorbs visible light, it may be a non-negligible contributor to positive direct aerosol radiative forcing. Quantification of that absorption is necessary so that radiative-transfer models can evaluate the net radiative effect of OC.

    In this work, we examine absorption by primary OC emitted from solid fuel pyrolysis. We provide absorption spectra of this material, which can be related to the imaginary refractive index. This material has polar character but is not fully water-soluble: more than 92% was extractable by methanol or acetone, compared with 73% for water and 52% for hexane. Water-soluble OC contributes to light absorption at both ultraviolet and visible wavelengths. However, a larger portion of the absorption comes from OC that is extractable only by methanol. Absorption spectra of water-soluble OC are similar to literature reports. We compare spectra for material generated with different wood type, wood size and pyrolysis temperature. Higher wood temperature is the main factor creating OC with higher absorption; changing wood temperature from a devolatilizing state of 210 °C to a near-flaming state of 360 °C causes about a factor of four increase in mass-normalized absorption at visible wavelengths. A clear-sky radiative transfer model suggests that, despite the absorption, both high-temperature and low-temperature OC result in negative top-of-atmosphere radiative forcing over a surface with an albedo of 0.19 and positive radiative forcing over bright surfaces. Unless absorption by real ambient aerosol is higher than that measured here, it probably affects global average clear-sky forcing very little, but could be important in energy balances over bright

  5. Carbon Monoxide Off-Gassing From Bags of Wood Pellets.

    Science.gov (United States)

    Rahman, Mohammad Arifur; Rossner, Alan; Hopke, Philip K

    2017-12-25

    Wood pellets are increasingly used for space heating in the United States and globally. Prior work has shown that stored bulk wood pellets produce sufficient carbon monoxide (CO) to represent a health concern and exceed regulatory standards for occupational exposures. However, most of the pellets used for residential heating are sold in 40-pound (18.1 kg) plastic bags. This study measured CO emission factors from fresh, bagged-wood pellets as a function of temperature and relative humidity. CO concentrations increased with increasing temperature and moisture in the container. CO measurements in a pellet mill warehouse with stored pallets of bagged pellets had 8-h average CO concentrations up to 100 ppm exceeding occupational standards for worker exposure. Thus, manufacturers, distributors, and home owners should be aware of the potential for CO in storage areas and design facilities with appropriate ventilation and CO sensors. © The Author(s) 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  6. Modelling carbon stocks and fluxes in the wood product sector: a comparative review.

    Science.gov (United States)

    Brunet-Navarro, Pau; Jochheim, Hubert; Muys, Bart

    2016-07-01

    In addition to forest ecosystems, wood products are carbon pools that can be strategically managed to mitigate climate change. Wood product models (WPMs) simulating the carbon balance of wood production, use and end of life can complement forest growth models to evaluate the mitigation potential of the forest sector as a whole. WPMs can be used to compare scenarios of product use and explore mitigation strategies. A considerable number of WPMs have been developed in the last three decades, but there is no review available analysing their functionality and performance. This study analyses and compares 41 WPMs. One surprising initial result was that we discovered the erroneous implementation of a few concepts and assumptions in some of the models. We further described and compared the models using six model characteristics (bucking allocation, industrial processes, carbon pools, product removal, recycling and substitution effects) and three model-use characteristics (system boundaries, model initialization and evaluation of results). Using a set of indicators based on the model characteristics, we classified models using a hierarchical clustering technique and differentiated them according to their increasing degrees of complexity and varying levels of user support. For purposes of simulating carbon stock in wood products, models with a simple structure may be sufficient, but to compare climate change mitigation options, complex models are needed. The number of models has increased substantially over the last ten years, introducing more diversity and accuracy. Calculation of substitution effects and recycling has also become more prominent. However, the lack of data is still an important constraint for a more realistic estimation of carbon stocks and fluxes. Therefore, if the sector wants to demonstrate the environmental quality of its products, it should make it a priority to provide reliable life cycle inventory data, particularly regarding aspects of time and

  7. Synthesis and characterization of carbon nanospheres obtained by hydrothermal carbonization of wood-derived and other saccharides

    Science.gov (United States)

    Qiangu Yan; Rui Li; Hossein Toghiani; Zhiyong Cai; Jilei Zhang

    2015-01-01

    Carbon nanospheres were synthesized by hydrothermal carbonization (HTC) of four different carbon sources: xylose, glucose, sucrose, and pine wood derived saccharides. The obtained carbon nanospheres were characterized for particle morphology and size, and surface functional groups. Morphological and structural differences among these saccharides derived HTC carbons...

  8. Comparing Life-Cycle Carbon and Energy Impacts for Biofuel, Wood Product, and Forest Management

    Science.gov (United States)

    Bruce Lippke; Richard Gustafson; Richard Venditti; Philip Steele; Timothy A. Volk; Elaine Oneil; Leonard Johnson; Maureen E. Puettmann; Kenneth Skog

    2012-01-01

    The different uses of wood result in a hierarchy of carbon and energy impacts that can be characterized by their efficiency in displacing carbon emissions and/or in displacing fossil energy imports, both being current national objectives. When waste wood is used for biofuels (forest or mill residuals and thinnings) fossil fuels and their emissions are reduced without...

  9. Life cycle impacts of forest management and wood utilization on carbon mitigation : knowns and unknowns

    Science.gov (United States)

    Bruce Lippke; Elaine Oneil; Rob Harrison; Kenneth Skog; Leif Gustavsson; Roger Sathre

    2011-01-01

    This review on research on life cycle carbon accounting examines the complexities in accounting for carbon emissions given the many different ways that wood is used. Recent objectives to increase the use of renewable fuels have raised policy questions, with respect to the sustainability of managing our forests as well as the impacts of how best to use wood from our...

  10. Magnetic separation of carbon-encapsulated Fe nanoparticles from thermally-treated wood char

    Science.gov (United States)

    Sung Phil Mun; Zhiyong Cai; Jilei Zhang

    2013-01-01

    Wood char,a by-product from the fast-pyrolysis process of southern yellow pine wood for bio-oil production, was carbonized with Fenano particles (FeNPs) as a catalyst to prepare carbon-encapsulated Fe nanoparticles. A magnetic separation method was tested to isolate carbon-encapsulated Fe nano particles from the carbonized char. X-ray diffraction pattern clearly shows...

  11. Electron microscopic study on catalytic carbonization of biomass carbon : I. Carbonization of wood charcoal at high temperature by Al-triisopropoxide

    NARCIS (Netherlands)

    Hata, T.; Imamura, Y.; Nishimiya, K.; Bronsveld, P.M; Vystavel, Tomas; de Hosson, J.T.M.; Kikuchi, H.

    2002-01-01

    Currently, carbonized materials from wood or waste have been focused upon as raw materials for carbons. These carbons are important for the production of artificial graphite. First hand observation was done on the growth of long parallel graphite structures in wood charcoal. A comparison is made

  12. Ceiba Pentradenta wood waste activated carbon for waste water treatment

    Directory of Open Access Journals (Sweden)

    K. Geetha

    2014-03-01

    Full Text Available Adsorption is considered to be one of the most promising techniques for waste water treatment over the last decades. The low materials originated from various sources such as agricultural sources and byproducts, agricultural residues and wastes, low-cost sources from which most complex adsorbents will be produced .The farming waste material has to be disposed either safely or must be reused for some valuable purpose. In this consent Ceiba Pentradenta Wood waste, an agricultural waste material which is being converted as Activated carbon in presence of Nitrogen atmosphere at 7000 C is used as an adsorbent for dye removal. The portrayal studies such as bulk density, moisture content, ash content, fixed carbon content, soluble matter (water, acid, matter soluble in acid, pH, decolourising power, ion exchange capacity, percentage content and surface area have been carried out to assess the suitability of these carbons as absorbents in treatment of the water and wastewater. The present study reveals the recovery of valuable adsorbents from readily and cheaply available agriculture wastes.

  13. Wood

    DEFF Research Database (Denmark)

    Unterrainer, Walter

    2014-01-01

    is a renewable resource makes it predestinated for what is considered ´sustainable architecture´. But the reality is less linear and there are serious traps: In fact the lecture shows by examples that it is much easier to build very unsustainable buildings in wood than the other way round! Where does the wood...

  14. Secondary combustion system for wood burning stove

    Energy Technology Data Exchange (ETDEWEB)

    von Conta, P.E.W.

    1986-12-16

    This patent describes an improved secondary combustion system for combusting the exhaust gases exiting from a fire box in a wood burning stove comprising: an insulated conduit defining an exhaust passageway leading from an intake opening to an exit opening; screen means interposed across the exhaust passageway in the vicinity of the intake opening to impart a rapid acceleration to a gas stream entering the exhaust passageway; rotation means to impart a rotation to the gas stream in a first portion of the exhaust passageway; counter-rotation means to impart a counter-rotation to the gas stream in a second portion of the exhaust passageway; deceleration means to decelerate the gas stream in the second portion of the exhaust passageway; and secondary air means to inject a source of secondary air into the exhaust passageway.

  15. Contribution of dead wood to biomass and carbon stocks in the Caribbean: St. John, U.S. Virgin Islands

    Science.gov (United States)

    Sonja N. Oswalt; Thomas J. Brandeis

    2008-01-01

    Dead wood is a substantial carbon stock in terrestrial forest ecosystems and hence a critical component of global carbon cycles. Given the limited amounts of dead wood biomass and carbon stock information for Caribbean forests, our objectives were to: (1) describe the relative contribution of down woody materials (DWM) to carbon stocks on the island of St. John; (2)...

  16. Preparation of Fe-cored carbon nanomaterials from mountain pine beetle-killed pine wood

    Science.gov (United States)

    Sung Phil Mun; Zhiyong Cai; Jilei Zhang

    2015-01-01

    The mountain pine beetle-killed lodgepole pine (Pinus contorta) wood treated with iron (III) nitrate solution was used for the preparation of Fe-cored carbon nanomaterials (Fe-CNs) under various carbonization temperatures. The carbonization yield of Fe-treated sample (5% as Fe) was always 1–3% higher (after ash compensation) than that of the non-...

  17. Study on the preparation of wood vinegar from biomass residues by carbonization process.

    Science.gov (United States)

    Wu, Qiaomei; Zhang, Shouyu; Hou, Baoxin; Zheng, Hongjun; Deng, Wenxiang; Liu, Dahai; Tang, Wenjiao

    2015-03-01

    In the paper, the production of wood vinegar from Chinese fir sawdust (FS), cotton stalk (CS) and bamboo sawdust (BS) by carbonization process was addressed. The wood vinegar yield was investigated and the organic compounds contained were determined by gas chromatography and mass spectrometry. It was found that the refined wood vinegar yield of FS increased firstly and then decreased with increasing carbonization temperature and the highest yield reached about 25% in 350-450°C. The relative contents of acids and ketones from FS decreased and that of phenols increased with increasing temperature. The relative contents of acids and phenols in the wood vinegars produced from the samples were in the order of BS>CS>FS and that of ketones reversed. KCl solution treatment caused a decrease in the relative contents of the phenols and ketones, but an increase in that of the acids in FS wood vinegar. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Wood chip production system making its debut in Austria

    Energy Technology Data Exchange (ETDEWEB)

    1987-05-21

    The main component of the wood chip production system is a high-performance drum-type wood chipper which feeds the wood to a blower pipe transferring it to a tiltable chip container. Another essential element consists in the feeding system which continuously feeds the chipper with felled wood and other remains and provides for an uninterrupted, speedy and time-saving charging of the chipping unit. A hydraulic crane serves to feed the chipper. Both the feeding process and the chopping process are controlled by the driver. Wood chipper standard equipment moreover comprises built-in overload safety elements, an automatic stopping device responding as the system gets blocked up, a return circuit clearing the mouth of the feeder in case it is blocked, hydraulically controlled feeding and pressing rollers and an automatic speed controlling device. All components are mounted on a support which is installed on a carrier vehicle.

  19. EVALUATION OF WOOD PERFORMANCE IN BUILDING CONSTRUCTION THROUGH SYSTEM APPROACH

    Directory of Open Access Journals (Sweden)

    Ricardo Pedreschi

    2005-09-01

    Full Text Available Building construction is considered to be the leading market for the wood industry, in developed and developingcountries. The greatest amount of wood produced in Brazil is consumed as firewood and energy, followed by production of celluloseand third as machined wood. The use of wood from planted forests can be increased. This would lead to a better use of naturalresources, and consequently to an increased sustainability of forest activity in many regions of the country. The performance of woodcan be observed from many different insights: symbolic performance, technical performance and economical performance, conductedby the method of systems approach to architecture. Usages of wood related to the performances of the material, with the redefinitionof parameters of use, elaborating a new culture linked to new technologies were outlined. This work diagnosed the usage of wood inbuilding construction based in system analysis. Through an opinion research related to the acceptation of the use of wood we observethe possibilities of utilization according to physical and mechanical proprieties, aesthetics and appearance performance and postoccupation.According to the results obtained related to the culture and knowledge about the use of wood from planted forest, it canconclude that there is not enough knowledge in this area, and it is, therefore, necessary to create an information system forprofessionals and for people in general.

  20. Quantifying carbon stores and decomposition in dead wood: A review

    Science.gov (United States)

    Matthew B. Russell; Shawn Fraver; Tuomas Aakala; Jeffrey H. Gove; Christopher W. Woodall; Anthony W. D’Amato; Mark J. Ducey

    2015-01-01

    The amount and dynamics of forest dead wood (both standing and downed) has been quantified by a variety of approaches throughout the forest science and ecology literature. Differences in the sampling and quantification of dead wood can lead to differences in our understanding of forests and their role in the sequestration and emissions of CO2, as...

  1. Preparation, characterization and phenol adsorption capacity of activated carbons from African beech wood sawdust

    OpenAIRE

    N.T. Abdel-Ghani; G.A. El-Chaghaby; F. Helal

    2016-01-01

    In the present study, different activated carbons were prepared from carbonized African beech wood sawdust by potassium hydroxide activation. The activated carbons were characterized by brunauer–emmett–teller, scanning electron microscope, fourier transform infrared spectroscopy, and thermogravimetric analyzer. The phenol adsorption capacity of the prepared carbons was evaluated. The different factors affecting phenol’s removal were studied including: contact time, solution pH and initial phe...

  2. Sustainable Construction for Urban Infill Development Using Engineered Massive Wood Panel Systems

    Directory of Open Access Journals (Sweden)

    Steffen Lehmann

    2012-10-01

    Full Text Available Prefabricated engineered solid wood panel construction systems can sequester and store CO2. Modular cross-laminated timber (CLT, also called cross-lam panels form the basis of low-carbon, engineered construction systems using solid wood panels that can be used to build residential infill developments of 10 storeys or higher. Multi-apartment buildings of 4 to 10 storeys constructed entirely in timber, such as recently in Europe, are innovative, but their social and cultural acceptance in Australia and North America is at this stage still uncertain. Future commercial utilisation is only possible if there is a user acceptance. The author is part of a research team that aims to study two problems: first models of urban infill; then focus on how the use of the CLT systems can play an important role in facilitating a more livable city with better models of infill housing. Wood is an important contemporary building resource due to its low embodied energy and unique attributes. The potential of prefabricated engineered solid wood panel systems, such as CLT, as a sustainable building material and system is only just being realised around the globe. Since timber is one of the few materials that has the capacity to store carbon in large quantities over a long period of time, solid wood panel construction offers the opportunity of carbon engineering, to turn buildings into ‘carbon sinks’. Thus some of the historically negative environmental impact of urban development and construction can be turned around with CLT construction on brownfield sites.

  3. Wood

    Science.gov (United States)

    David W. Green; Robert H. White; Antoni TenWolde; William Simpson; Joseph Murphy; Robert J. Ross; Roland Hernandez; Stan T. Lebow

    2006-01-01

    Wood is a naturally formed organic material consisting essentially of elongated tubular elements called cells arranged in a parallel manner for the most part. These cells vary in dimensions and wall thickness with position in the tree, age, conditions of growth, and kind of tree. The walls of the cells are formed principally of chain molecules of cellulose, polymerized...

  4. The Wood-Growth-and-Burial Process (WGBP) Permanent Wood Sequestration to Solve the Global Carbon Dioxide Problem

    Science.gov (United States)

    Scholz, F.; Hasse, U.

    2008-12-01

    Among all global environmental problems there is one which dominates over all others: this is the excessive release of carbon dioxide due to burning of fossil fuels like coal, oil, and gas. The only way to achieve a permanent removal of anthropogenic CO2 must make use of photosynthesis since, so-far, no other technology is able to bind the necessary huge amounts of carbon. Therefore, we propose to grow wood on any available areas, and to bury the wood under anaerobic conditions, e.g., in emptied open pits of coal mining, any other available pits, and possibly also in emptied underground mines. At these places the wood will keep for practically unlimited times, undergoing only very slow carbonization reactions. Simple calculations allow concluding that humans could already now scavenge even all the released CO2, but a more realistic goal may be to bind 20, 30, or 60 percent. This is more a political question than a scientific one. General features of the WGBP are: The growth of woods will transform deforested areas and fallow land to some kind of natural vegetation with the accompanying positive side effects of restoring biotopes, improving the water balance and thus also improving the climate. The growth of woods will produce enormous amounts of oxygen and thus it will add to a sound oxygen balance. It will improve the air quality because of the filtering effect of woods. The growth of woods will improve the soil quality because leaves and roots will stay on and in the ground when the wood is harvested. The WGBP will create jobs in areas where there is an urgent demand for these. The WGBP will offer the opportunity to re-cultivate open pit mining areas. The WGBP will offer the possibility to fill underground mines in a way to prevent earth quakes caused by collapsing mine shafts. The WGBP will enable mankind to survive the time span ahead of us in which mankind will still use fossil fuels. The WGBP can be easily financed by societies via very small additional taxes

  5. Stream catalog of the Wood River Lake System

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Information on the red salmon runs to all the major spawning tributaries in the Wood River lake system, Bristol Bay, Alaska from 1946 to 1962 is cataloged in this...

  6. Climate protection and carbon in wood. Comparison of management strategies; Klimaschutz und Kohlenstoff in Holz. Vergleich verschiedener Strategien

    Energy Technology Data Exchange (ETDEWEB)

    Rock, J.

    2008-11-05

    Forests are important for climate protection: They sequester and store carbon, and provide timber for wood products and fossil fuel substitution. These functions interact in a complex way. From a climate protection point of view it is desirable to optimize these interactions, i.e. to maximize the amount of carbon stored in the whole system (called ''forest-timber-option'') and to analyse what impact a management decision at the local level has with regard to the amount of carbon in the atmosphere. Inventory methods to estimate the total amount of carbon in a forest are needed. Classical forest inventories assess above-ground tree volume. To estimate total carbon in accordance with the requirements of the Kyoto-Protocol, these inventories need to be expanded with regard to the assessment of disturbances, dead wood decomposition, soil carbon, and the estimation of carbon from volume. Methods invented here can also be used to assess local-level management activities, or to ''factor out'' non-human-induced changes in carbon pools. The optimization of the ''forest-timber-option'' is restricted due to regulations of the Kyoto-Protocol, because forest-related measures are accounted for under other sectors than wood and timber use. Harvested timber is estimated as an ''emission'' from the forest, and forest owners have no benefit from the use of wood for industrial purposes. Here, an inclusion of forestry in emission trading schemes can be advantageous. Alternative ways to produce wood are short-rotation coppice plantations on agricultural soils. Information about growth and yield potentials are scarce for the regions where land availability is high. Aspen (P. tremula, P. tremuloides) was parameterized in an eco-physiological forest growth model (''4C'') to assess these potentials on sites in Eastern Germany under current and under changing climatic conditions. The results

  7. Climate seasonality limits leaf carbon assimilation and wood productivity in tropical forests

    Science.gov (United States)

    Fabien H. Wagner; Bruno Herault; Damien Bonal; Clement Stahl; Liana O. Anderson; Timothy R. Baker; Gabriel Sebastian Becker; Hans Beeckman; Danilo Boanerges Souza; Paulo Cesar Botosso; David M. J. S. Bowman; Achim Brauning; Benjamin Brede; Foster Irving Brown; Jesus Julio Camarero; Plinio Barbosa Camargo; Fernanda C. G. Cardoso; Fabricio Alvim Carvalho; Wendeson Castro; Rubens Koloski Chagas; Jerome Chave; Emmanuel N. Chidumayo; Deborah A. Clark; Flavia Regina Capellotto Costa; Camille Couralet; Paulo Henrique da Silva Mauricio; Helmut Dalitz; Vinicius Resende de Castro; Jacanan Eloisa de Freitas Milani; Edilson Consuelo de Oliveira; Luciano de Souza Arruda; Jean-Louis Devineau; David M. Drew; Oliver Dunisch; Giselda Durigan; Elisha Elifuraha; Marcio Fedele; Ligia Ferreira Fedele; Afonso Figueiredo Filho; Cesar Augusto Guimaraes Finger; Augusto Cesar Franco; Joao Lima Freitas Junior; Franklin Galvao; Aster Gebrekirstos; Robert Gliniars; Paulo Mauricio Lima de Alencastro Graca; Anthony D. Griffiths; James Grogan; Kaiyu Guan; Jurgen Homeier; Maria Raquel Kanieski; Lip Khoon Kho; Jennifer Koenig; Sintia Valerio Kohler; Julia Krepkowski; Jose Pires Lemos-Filho; Diana Lieberman; Milton Eugene Lieberman; Claudio Sergio Lisi; Tomaz Longhi Santos; Jose Luis Lopez Ayala; Eduardo Eijji Maeda; Yadvinder Malhi; Vivian R. B. Maria; Marcia C. M. Marques; Renato Marques; Hector Maza Chamba; Lawrence Mbwambo; Karina Liana Lisboa Melgaco; Hooz Angela Mendivelso; Brett P. Murphy; Joseph O' Brien; Steven F. Oberbauer; Naoki Okada; Raphael Pelissier; Lynda D. Prior; Fidel Alejandro Roig; Michael Ross; Davi Rodrigo Rossatto; Vivien Rossi; Lucy Rowland; Ervan Rutishauser; Hellen Santana; Mark Schulze; Diogo Selhorst; Williamar Rodrigues Silva; Marcos Silveira; Susanne Spannl; Michael D. Swaine; Jose Julio Toledo; Marcos Miranda Toledo; Marisol Toledo; Takeshi Toma; Mario Tomazello Filho; Juan Ignacio Valdez Hernandez; Jan Verbesselt; Simone Aparecida Vieira; Gregoire Vincent; Carolina Volkmer de Castilho; Franziska Volland; Martin Worbes; Magda Lea Bolzan Zanon; Luiz E. O. C. Aragao

    2016-01-01

    The seasonal climate drivers of the carbon cycle in tropical forests remain poorly known, although these forests account for more carbon assimilation and storage than any other terrestrial ecosystem. Based on a unique combination of seasonal pan-tropical data sets from 89 experimental sites (68 include aboveground wood productivity measurements and 35 litter...

  8. Thermal Conversion of Pine Wood Char to Carbon Nanomaterials in the Presence of Iron Nanoparticles

    Science.gov (United States)

    Sung Phil Mun; Zhiyong Cai; Fumiya Watanabe; Umesh P. Agarwal; Jilei. Zhang

    2012-01-01

    Southern yellow pine (Pinus taeda) wood char powder was thermally treated at 1,000:C in the presence of a 25-nm-size Fe nanoparticle catalyst. The thermally treated carbon materials were analyzed by Raman spectroscopy and high-resolution transmission electron microscopy. Well-aligned graphitic carbon structures with 15 to 17 layers on...

  9. Net change in carbon emissions with increased wood energy use in the United States

    Science.gov (United States)

    Prakash Nepal; David N. Wear; Kenneth E. Skog

    2014-01-01

    Use of wood biomass for energy results in carbon (C) emissions at the time of burning and alters C stocks on the land because of harvest, regrowth, and changes in land use or management. This study evaluates the potential effects of expanded woody biomass energy use (for heat and power) on net C emissions over time. A scenario with increased wood energy use is compared...

  10. An innovative wood-chip-framework substrate used as slow-release carbon source to treat high-strength nitrogen wastewater.

    Science.gov (United States)

    Li, Huai; Chi, Zifang; Yan, Baixing; Cheng, Long; Li, Jianzheng

    2017-01-01

    Removal of nitrogen in wastewater before discharge into receiving water courses is an important consideration in treatment systems. However, nitrogen removal efficiency is usually limited due to the low carbon/nitrogen (C/N) ratio. A common solution is to add external carbon sources, but amount of liquid is difficult to determine. Therefore, a combined wood-chip-framework substrate (with wood, slag and gravel) as a slow-release carbon source was constructed in baffled subsurface-flow constructed wetlands to overcome the problem. Results show that the removal rate of ammonia nitrogen (NH4+-N), total nitrogen (TN) and chemical oxygen demand (COD) could reach 37.5%-85%, 57.4%-86%, 32.4%-78%, respectively, indicating the combined substrate could diffuse sufficient oxygen for the nitrification process (slag and gravel zone) and provide carbon source for denitrification process (wood-chip zone). The nitrification and denitrification were determined according to the location of slag/gravel and wood-chip, respectively. Nitrogen removal was efficient at the steady phase before a shock loading using slag-wood-gravel combined substrate because of nitrification-denitrification process, while nitrogen removal was efficient under a shock loading with wood-slag-gravel combined substrate because of ANAMMOX process. This study provides a new idea for wetland treatment of high-strength nitrogen wastewater. Copyright © 2016. Published by Elsevier B.V.

  11. Limiting conditions for decay in wood systems

    Science.gov (United States)

    Paul I. Morris; Jerrold E. Winandy

    2002-01-01

    Hygrothermal models can predict temperature and moisture conditions in wall components subjected to real weather data, but specific data and a fundamental understanding of how temperature and wood moisture content dictate the progression of decay under these conditions is required for modellers to predict consequences of decay on building performance. It is well...

  12. Synthesis of carbon nanostructures by the pyrolysis of wood sawdust in a tubular reactor

    Directory of Open Access Journals (Sweden)

    Maria G. Sebag Bernd

    2017-04-01

    Full Text Available Carbon nanostructures were produced by wood sawdust pyrolysis. The results obtained revealed that the thermodynamic simulations (FactSage were successful to predict the best reaction conditions for the synthesis of carbon, and potentially carbon fibers and nanotubes production. Graphite formation was indicated by XRD study, and by thermal analysis which presented the carbon oxidation range. The morphology of the samples (SEM/TEM analysis showed carbon nanotubes/nanofibers varying in size and thickness, with defects and flaws. The tubular reactor was considered to be an economic and environmental correct way to nanomaterials growing, with the simultaneous generation of hydrogen and lower pollutant gas emissions.

  13. Ecological carbon sequestration via wood harvest and storage: Practical constraints and real-world possibilities

    Science.gov (United States)

    Zeng, N.; King, A. W.; Zaitchik, B. F.; Wullschleger, S. D.

    2014-12-01

    A carbon sequestration strategy was recently proposed in which a forest is sustainably managed, and a fraction of the wood is selectively harvested and stored to prevent decomposition under anaerobic, dry or cold conditions. Because a large flux of CO2 is constantly assimilated into the world's forests via photosynthesis, partially cutting off its return pathway to the atmosphere forms an effective carbon sink. The live trees serve as a 'carbon scrubber' or 'carbon remover' that provides continuous sequestration. The stored wood is a semi-permanent carbon sink, but also serves as a 'biomass/bioenergy reserve' that could be utilized in the future if deemed more beneficial, for instance, by contributing to supply infrastructure for biomass power generation. Based on global forest coarse wood production rate, land availability, conservation, other wood use, and other practical constraints, we estimate a carbon sequestration potential for wood harvest and storage (WHS) 1-3 GtC y-1. The implementation of such a scheme at our estimated lower value of 1 GtC y-1 would imply a doubling of the current world wood harvest rate. This can be achieved by harvesting wood at a modest harvesting intensity of 1.2 tC ha-1 y-1, over a forest area of 8 Mkm2 (800 Mha). To achieve the higher value of 3 GtC y-1, forests need to be managed this way on half of the world's forested land, or on a smaller area but with higher harvest intensity. However, any successful implementation strategy will need to balance the needs of the local community and environment. It nonethelss provides a novel new addition to a portfolio of existing forest management strategies. We propose 'carbon sequestration and biomass farms' with mixed land use for carbon, energy, agriculture, as well as conservation, provided that governance issues are properly dealt with. In another example, the forests damaged by insects, fire, storms such as in the America West could be thinned to reduce fire danger and harvested for

  14. Harvested wood products and carbon sink in a young beech high forest

    Directory of Open Access Journals (Sweden)

    Pilli R

    2008-03-01

    Full Text Available According to art. 3.4 of the Kyoto Protocol (KP, Italy has elected forest management as additional human-induced activity to attain the goal of reduction in greenhouse gas emissions. The whole forest area not subjected to afforestation, reforestation or deforestation processes since 1990 will be considered as managed forest. In order to analyse different management strategies, the Carbon-Pro Project, involving 9 partners of the European CADSES area, considered a young beech high forest (ex-coppice, defined as "transitory silvicultural system" as a common case study for the Pre-alps region. Using data collected with forest plans during the period 1983 - 2005, aboveground and belowground forest carbon stock and sink of a specific forest compartment were estimated by the Carbon Stock Method proposed by the IPCC Guidelines. In order to apply this approach 41 trees were cut and a species-specific allometric equation was developed. Considering the aboveground tree biomass, the carbon sink amounts to 1.99 and 1.84 Mg C ha-1 y-1 for the period 1983 - 1994 and 1994 - 2005 respectively. Adding the belowground tree biomass, the estimated sink amounts to 2.59 and 2.39 Mg C ha-1 y-1 for each period. Taking the harvested wood products (firewood, the total carbon sequestration during the second period is 0.16 Mg C ha-1 y-1. The case study highlights the possible rules for the different management strategies. In effect, the utilisation of the entire increase in aboveground biomass as firewood gives an energy substitution effect but, according to the Marrakesh Accords, it cannot be accounted for the KP. On the other hand, an accumulation strategy gives the maximum possible carbon absorption and retention.

  15. Scots pine responses to elevated temperature and carbon dioxide concentration: growth and wood properties.

    Science.gov (United States)

    Kilpeläinen, Antti; Peltola, Heli; Ryyppö, Aija; Kellomäki, Seppo

    2005-01-01

    Growth and wood properties of 20-year-old Scots pine (Pinus sylvestris L.) trees were studied for 6 years in 16 closed chambers providing a factorial combination of two temperature regimes (ambient and elevated) and two carbon dioxide concentrations ([CO2]) (ambient and twice ambient). The elevation of temperature corresponded to the predicted effect at the site of a doubling in atmospheric [CO2]. Annual height and radial growth and wood properties were analyzed during 1997-2002. Physical wood properties analyzed included early- and latewood widths and their proportions, intra-ring wood densities, early- and latewood density and mean fiber length. Chemical wood properties analyzed included concentrations of acetone-soluble extractives, lignin, cellulose and hemicellulose. There were no significant treatment effects on height growth during the 6-year study. Elevated [CO2] increased ring width by 66 and 47% at ambient and elevated temperatures, respectively. At ambient [CO2], elevated temperature increased ring width by 19%. Increased ring width in response to elevated [CO2] resulted from increases in both early- and latewood width; however, there was no effect of the treatments on early- and latewood proportions. Mean wood density, earlywood density and fiber length increased in response to elevated temperature. The chemical composition of wood was affected by elevated [CO2], which reduced the cellulose concentration, and by elevated temperature, which reduced the concentration of acetone-soluble extractives. Thus, over the 6-year period, radial growth was significantly increased by elevated [CO2], and some wood properties were significantly affected by elevated temperature or elevated [CO2], or both, indicating that climate change may affect the material properties of wood.

  16. Carbon storage in harvested wood products for Ireland 1961-2009

    Science.gov (United States)

    Jennifer Donlan; Kenneth Skog; Kenneth A. Byrne

    2012-01-01

    Forests are significant stores of carbon (C). This has been recognised by the United Nations Framework Convention on Climate Change and forests are one of the sectors which are included in national greenhouse gas (GHG) inventories. Some of this C pool remains in wood after harvest and can remain in use for long periods of time. Accounting for the C stored in harvested...

  17. Do stable carbon isotopes of brown coal woods record changes in Lower Miocene palaeoecology?

    NARCIS (Netherlands)

    Poole, I.J.; Dolezych, M.; Kool, J.; Burgh, J. van der; Bergen, P.F. van

    2006-01-01

    Stable carbon isotope ratios of fossil wood from the Miocene brown coal deposits in former East Germany are compared with palaeobotanical and sedimentological data to test the use of stable isotopes in determining palaeoenvironment. Significant differences in the chemical composition of samples

  18. Preparation of activated carbons from walnut wood: a study of microporosity and fractal dimension

    Science.gov (United States)

    Gómez-Serrano, Vicente; Cuerda-Correa, Eduardo M.; Fernández-González, M. Carmen; Alexandre-Franco, María F.; Macías-García, Antonio

    2005-04-01

    Agricultural and forest residues constitute an extraordinarily important source of precursors for the manufacture of activated carbons. Activated carbons are well known as porous solids with a highly developed apparent surface area. In the present work, activated carbon has been prepared from forest residues of walnut tree wood (a raw material not studied until now) by physical activation. Raw material has been carbonized between 573 and 1073 K and afterwards activated in air at temperatures between 623 and 823 K. The apparent surface area, micropore volume, mesopore volume and fractal dimension of the samples prepared have been calculated.

  19. Acute wood or coal exposure with carbon monoxide intoxication induces sister chromatid exchange

    Energy Technology Data Exchange (ETDEWEB)

    Ozturk, S.; Vatansever, S.; Cefle, K.; Palanduz, S.; Guler, K.; Erten, N.; Erk, O.; Karan, M.A.; Tascioglu, C. [University of Istanbul, Istanbul (Turkey). Istanbul Faculty of Medicine

    2002-07-01

    The object of this study was to investigate the genotoxic effect of acute overexposure to combustion products originating from coal or wood stoves in patients presenting with acute carbon monoxide intoxication. The authors analyzed the frequency of sister chromatid exchange and the carboxyhemoglobin concentration in 20 consecutive patients without a history of smoking or drug use who had been treated in the Emergency Care Unit of Istanbul Medical Faculty due to acute carbon monoxide intoxication. All of these cases were domestic accidents due to dysfunctioning coal or wood stoves. The results were compared with a control group of 20 nonsmoking, nondrug-using healthy individuals matched for age, sex, and absence of other chemical exposure. It was concluded that acute exposure to combustion products of wood or coal is genotoxic to DNA. Potential causes of genotoxicity include known mutagenic compounds present in coal or wood smoke and ash, oxygen radicals formed during combustion, as well as hypoxic and reperfusion injury mechanisms initiated by carbon monoxide intoxication.

  20. Economic analysis of wood- or bark-fired systems

    Science.gov (United States)

    T. H. Ellis

    1978-01-01

    The Tennessee Valley Authority, in cooperation with the U.S. Department of Agriculture and the Forest Products Research Society, is preparing three slide-tape presentations to help people evaluate wood- and bark fueled boiler systems as alternatives to ones using oil, gas, or coal. The first two presentations cover equipment selection and estimation of fuel values; the...

  1. Production and characterization of activated carbon from wood wastes

    Science.gov (United States)

    Ramirez, A. P.; Giraldo, S.; Ulloa, M.; Flórez, E.; Y Acelas, N.

    2017-12-01

    Cedarwood (Cedrela Angustifolia) and teak (Tectona Grandis) woods are typically used for furniture manufacture because they have high durability, are light and easy to work. During these manufacturing process, large amount of these wastes is generated causing disposal environmental problems. In this paper, the residual wastes (sawdust) of Cedar (C) and Teak (T) are transformed into an activated material. The chemical composition of both biomass (C and T) was determinate by TGA (Thermogravimetric Analysis). Activated materials were characterized in surface area following the BET (Brunauer, Emmett and Teller) method, morphology using SEM (Scanning Electron Microscopy) and to know their functional groups a FTIR (Fourier Transform Infrared Spectroscopy) analysis was done. Their adsorption capacity was evaluated by removal of Methylene Blue (MB) and Congo Red (CR) from aqueous solutions.

  2. Durable Feedback Control System for Small Scale Wood Chip Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Korpela, T.; Bjoerkqvist, T.; Lautala, P. (Tampere Univ. of Technology, Dept. of Automation Science and Engineering, FIN-33101 Tampere (Finland)). E-mail: timo.korpela@tut.fi

    2008-10-15

    The purpose is to control wood chip combustion in an inexpensive and durable way. A control concept in order to reduce the effect of fluctuation of the fuel feed is introduced. The concept is based on temperature and lambda measurements. The main task of the control system is to set the fuel feed at a desired level after a change in the combustion conditions. Additionally, temporary fluctuations of the degree of filling of feeding screw are compensated. Test results of a 80 kW and a 200 kW commercial wood chip fired systems are introduced. The process experiments indicate that the high level control system is able to adapt to varying combustion conditions and to maintain low emission levels. Furthermore, passive means that can be exploited to stabilize the combustion are discussed. As the control concept is not dependent on the design of the combustion system, the concept is adaptable to present systems

  3. Wood properties of Scots pines (Pinus sylvestris) grown at elevated temperature and carbon dioxide concentration.

    Science.gov (United States)

    Kilpeläinen, Antti; Peltola, Heli; Ryyppö, Aija; Sauvala, Kari; Laitinen, Kaisa; Kellomäki, Seppo

    2003-09-01

    Impacts of elevated temperature and carbon dioxide concentration ([CO2]) on wood properties of 15-year-old Scots pines (Pinus sylvestris L.) grown under conditions of low nitrogen supply were investigated in open-top chambers. The treatments consisted of (i) ambient temperature and ambient [CO2] (AT+AC), (ii) ambient temperature and elevated [CO2] (AT+EC), (iii) elevated temperature and ambient [CO2] (ET+AC) and (iv) elevated temperature and elevated [CO2] (ET+EC). Wood properties analyzed for the years 1992-1994 included ring width, early- and latewood width and their proportions, intra-ring wood density (minimum, maximum and mean, as well as early- and latewood densities), mean fiber length and chemical composition of the wood (cellulose, hemicellulose, lignin and acetone extractive concentration). Absolute radial growth over the 3-year period was 54% greater in AT+EC trees and 30 and 25% greater in ET+AC and ET+EC trees, respectively, than in AT+AC trees. Neither elevated temperature nor elevated [CO2] had a statistically significant effect on ring width, early- and latewood widths or their proportions. Both latewood density and maximum intra-ring density were increased by elevated [CO2], whereas fiber length was increased by elevated temperature. Hemicellulose concentration decreased and lignin concentration increased significantly in response to elevated temperature. There were no statistically significant interaction effects of elevated temperature and elevated [CO2] on the wood properties, except on earlywood density.

  4. Water soluble carbon nano-onions from wood wool as growth promoters for gram plants.

    Science.gov (United States)

    Sonkar, Sumit Kumar; Roy, Manas; Babar, Dipak Gorakh; Sarkar, Sabyasachi

    2012-12-21

    Water-soluble carbon nano-onions (wsCNOs) isolated from wood wool-a wood-based pyrolysis waste product of wood, can enhance the overall growth rate of gram (Cicer arietinum) plants. Treatment of plants with upto 30 μg mL(-1) of wsCNOs for an initial 10 day period in laboratory conditions led to an increase in the overall growth of the plant biomass. In order to examine the growth stimulating effects of wsCNOs under natural conditions, 10 day-old plants treated with and without wsCNOs were transplanted into soil of standard carbon and nitrogen composition. We observed an enhanced growth rate of the wsCNOs pre-treated plants in soil, which finally led to an increased productivity of plants in terms of a larger number of grams. On analyzing the carbon, hydrogen, and nitrogen (CHN) content for the shoot and fruit sections of the plants treated with and without wsCNOs, only a minor difference in the composition was noticed. However, a slight increase in the percentage of carbon and hydrogen in shoots reflects the synthesis of more organic biomass in the case of treated plants. This work shows that wsCNOs are non-toxic to plant cells and can act as efficient growth stimulants which can be used as benign growth promoters.

  5. Spectroscopic analysis of carbonization behavior of wood, cellulose and lignin

    NARCIS (Netherlands)

    Ishimaru, Kengo; Hata, Toshimitsu; Bronsveld, Paul; Meier, Dietrich; Imamura, Yuji

    The surface and bulk chemistry of Japanese cedar (Cryptomeria Japonica), cotton cellulose and lignin samples carbonized at 500-1,000 degrees C was investigated by elemental analysis, Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and micro-Raman spectrometry.

  6. Treatment of Copper Contaminated Municipal Wastewater by Using UASB Reactor and Sand-Chemically Carbonized Rubber Wood Sawdust Column

    Directory of Open Access Journals (Sweden)

    Swarup Biswas

    2016-01-01

    Full Text Available The performance of a laboratory scale upflow anaerobic sludge blanket (UASB reactor and its posttreatment unit of sand-chemically carbonized rubber wood sawdust (CCRWSD column system for the treatment of a metal contaminated municipal wastewater was investigated. Copper ion contaminated municipal wastewater was introduced to a laboratory scale UASB reactor and the effluent from UASB reactor was then followed by treatment with sand-CCRWSD column system. The laboratory scale UASB reactor and column system were observed for a period of 121 days. After the posttreatment column the average removal of monitoring parameters such as copper ion concentration (91.37%, biochemical oxygen demand (BODT (93.98%, chemical oxygen demand (COD (95.59%, total suspended solid (TSS (95.98%, ammonia (80.68%, nitrite (79.71%, nitrate (71.16%, phosphorous (44.77%, total coliform (TC (99.9%, and fecal coliform (FC (99.9% was measured. The characterization of the chemically carbonized rubber wood sawdust was done by scanning electron microscope (SEM, X-ray fluorescence spectrum (XRF, and Fourier transforms infrared spectroscopy (FTIR. Overall the system was found to be an efficient and economical process for the treatment of copper contaminated municipal wastewater.

  7. Treatment of Copper Contaminated Municipal Wastewater by Using UASB Reactor and Sand-Chemically Carbonized Rubber Wood Sawdust Column.

    Science.gov (United States)

    Biswas, Swarup; Mishra, Umesh

    2016-01-01

    The performance of a laboratory scale upflow anaerobic sludge blanket (UASB) reactor and its posttreatment unit of sand-chemically carbonized rubber wood sawdust (CCRWSD) column system for the treatment of a metal contaminated municipal wastewater was investigated. Copper ion contaminated municipal wastewater was introduced to a laboratory scale UASB reactor and the effluent from UASB reactor was then followed by treatment with sand-CCRWSD column system. The laboratory scale UASB reactor and column system were observed for a period of 121 days. After the posttreatment column the average removal of monitoring parameters such as copper ion concentration (91.37%), biochemical oxygen demand (BODT) (93.98%), chemical oxygen demand (COD) (95.59%), total suspended solid (TSS) (95.98%), ammonia (80.68%), nitrite (79.71%), nitrate (71.16%), phosphorous (44.77%), total coliform (TC) (99.9%), and fecal coliform (FC) (99.9%) was measured. The characterization of the chemically carbonized rubber wood sawdust was done by scanning electron microscope (SEM), X-ray fluorescence spectrum (XRF), and Fourier transforms infrared spectroscopy (FTIR). Overall the system was found to be an efficient and economical process for the treatment of copper contaminated municipal wastewater.

  8. Structure-Property Characterization of the Crinkle-Leaf Peach Wood Phenotype: A Future Model System for Wood Properties Research?

    Science.gov (United States)

    Wiedenhoeft, Alex C.; Arévalo, Rafael; Ledbetter, Craig; Jakes, Joseph E.

    2016-09-01

    Nearly 400 million years of evolution and field-testing by the natural world has given humans thousands of wood types, each with unique structure-property relationships to study, exploit, and ideally, to manipulate, but the slow growth of trees makes them a recalcitrant experimental system. Variations in wood features of two genotypes of peach ( Prunus persica L.) trees, wild-type and crinkle-leaf, were examined to elucidate the nature of weak wood in crinkle-leaf trees. Crinkle-leaf is a naturally-occurring mutation in which wood strength is altered in conjunction with an easily observed `crinkling' of the leaves' surface. Trees from three vigor classes (low growth rate, average growth rate, and high growth rate) of each genotype were sampled. No meaningful tendency of dissimilarities among the different vigor classes was found, nor any pattern in features in a genotype-by-vigor analysis. Wild-type trees exhibited longer vessels and fibers, wider rays, and slightly higher specific gravity. Neither cell wall mechanical properties measured with nanoindentation nor cell wall histochemical properties were statistically or observably different between crinkle-leaf and wild-type wood. The crinkle-leaf mutant has the potential to be a useful model system for wood properties investigation and manipulation if it can serve as a field-observable vegetative marker for altered wood properties.

  9. Analysis of Wood Structure Connections Using Cylindrical Steel and Carbon Fiber Dowel Pins

    Science.gov (United States)

    Vodiannikov, Mikhail A.; Kashevarova, Galina G., Dr.

    2017-06-01

    In this paper, the results of the statistical analysis of corrosion processes and moisture saturation of glued laminated timber structures and their joints in corrosive environment are shown. This paper includes calculation results for dowel connections of wood structures using steel and carbon fiber reinforced plastic cylindrical dowel pins in accordance with applicable regulatory documents by means of finite element analysis in ANSYS software, as well as experimental findings. Dependence diagrams are shown; comparative analysis of the results obtained is conducted.

  10. Atomic-Layer-Deposition Functionalized Carbonized Mesoporous Wood Fiber for High Sulfur Loading Lithium Sulfur Batteries.

    Science.gov (United States)

    Luo, Chao; Zhu, Hongli; Luo, Wei; Shen, Fei; Fan, Xiulin; Dai, Jiaqi; Liang, Yujia; Wang, Chunsheng; Hu, Liangbing

    2017-05-03

    Lithium-sulfur battery (LSB) as one of the most promising energy storage devices suffers from poor conductivity of sulfur and fast capacity decay triggered by the dissolution of polysulfides. In this work, functionalized carbonized mesoporous wood fiber (f-CMWF) is employed as a host to accommodate sulfur for the first time. Natural wood microfiber has unique hierarchical and mesoporous structure, which is well-maintained after carbonization. With such a hierarchical mesoporous structure, a high sulfur loading of 76 wt % is achieved in CMWF electrodes. The pore size of CMWF is tunable by atomic layer deposition (ALD) of a 5 nm Al 2 O 3 coating to form the f-CMWF. Such a thin layer slightly decreases the sulfur loading to 70%, but it remarkably promotes the cyclic stability of sulfur cathode, which delivers an initial capacity of 1115 mAh g -1 , and maintains a reversible capacity of 859 mAh g -1 for 450 cycles, corresponding to a slow capacity decay rate of 0.046% per cycle. More importantly, natural wood microfiber is first used as a raw material for sulfur encapsulating. This work is also critical for using low cost and mesoporous biomass carbon as bifunctional scaffold for LSB.

  11. Modeling Timber Supply, Fuel-Wood, and Atmospheric Carbon Mitigation

    OpenAIRE

    Lyon, Kenneth S.

    2004-01-01

    There is general agreement that global warming is occurring and that the main contributor to this probably is the buildup of green house gasses, GHG, in the atmosphere. Two main contributors are the utilization of fossil fuels and the deforestation of many regions of the world. This paper examines a number of current issues related to mitigating the global warming problem through forestry. We use discrete time optimal control to model a simplified carbon cycle. The burning of fossil fuels inc...

  12. Chapter 3: Wood Decay

    Science.gov (United States)

    Dan Cullen

    2014-01-01

    A significant portion of global carbon is sequestered in forest systems. Specialized fungi have evolved to efficiently deconstruct woody plant cell walls. These important decay processes generate litter, soil bound humic substances, or carbon dioxide and water. This chapter reviews the enzymology and molecular genetics of wood decay fungi, most of which are members of...

  13. Effect of the Addition of Carbon Nanomaterials on Electrical and Mechanical Properties of Wood Plastic Composites

    Directory of Open Access Journals (Sweden)

    Xingli Zhang

    2017-11-01

    Full Text Available Wood Plastic Composites (WPCs are a new generation of green composites that could optimize the use of harvested trees and increase the entire value chain. In this study, the electrical and mechanical properties of WPCs containing carbon blacks (CB, flake graphite (FG and carbon nanotubes (CNTs have been investigated. The electrical property of WPCs is improved significantly owing to the introduction of these carbon nanomaterial fillers. The volume and surface resistivity values of the investigated composites all obviously decreased with the increase in filler content, especially CNTs, which displayed the most satisfactory results. Based on a series of laboratory experiments carried out to investigate the mechanical performance, it can be concluded that the addition of the carbon nanomaterial fillers decreases the mechanical properties of WPCs slightly with the increase in filler content because of the weak interfacial interactions between the fillers and polymer matrix.

  14. Highly porous activated carbons from resource-recovered Leucaena leucocephala wood as capacitive deionization electrodes.

    Science.gov (United States)

    Hou, Chia-Hung; Liu, Nei-Ling; Hsi, Hsing-Cheng

    2015-12-01

    Highly porous activated carbons were resource-recovered from Leucaena leucocephala (Lam.) de Wit. wood through combined chemical and physical activation (i.e., KOH etching followed by CO2 activation). This invasive species, which has severely damaged the ecological economics of Taiwan, was used as the precursor for producing high-quality carbonaceous electrodes for capacitive deionization (CDI). Carbonization and activation conditions strongly influenced the structure of chars and activated carbons. The total surface area and pore volume of activated carbons increased with increasing KOH/char ratio and activation time. Overgasification induced a substantial amount of mesopores in the activated carbons. In addition, the electrochemical properties and CDI electrosorptive performance of the activated carbons were evaluated; cyclic voltammetry and galvanostatic charge/discharge measurements revealed a typical capacitive behavior and electrical double layer formation, confirming ion electrosorption in the porous structure. The activated-carbon electrode, which possessed high surface area and both mesopores and micropores, exhibited improved capacitor characteristics and high electrosorptive performance. Highly porous activated carbons derived from waste L. leucocephala were demonstrated to be suitable CDI electrode materials. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Stiff, Thermally Stable and Highly Anisotropic Wood-Derived Carbon Composite Monoliths for Electromagnetic Interference Shielding.

    Science.gov (United States)

    Yuan, Ye; Sun, Xianxian; Yang, Minglong; Xu, Fan; Lin, Zaishan; Zhao, Xu; Ding, Yujie; Li, Jianjun; Yin, Weilong; Peng, Qingyu; He, Xiaodong; Li, Yibin

    2017-06-28

    Electromagnetic interference (EMI) shielding materials for electronic devices in aviation and aerospace not only need lightweight and high shielding effectiveness, but also should withstand harsh environments. Traditional EMI shielding materials often show heavy weight, poor thermal stability, short lifetime, poor tolerance to chemicals, and are hard-to-manufacture. Searching for high-efficiency EMI shielding materials overcoming the above weaknesses is still a great challenge. Herein, inspired by the unique structure of natural wood, lightweight and highly anisotropic wood-derived carbon composite EMI shielding materials have been prepared which possess not only high EMI shielding performance and mechanical stable characteristics, but also possess thermally stable properties, outperforming those metals, conductive polymers, and their composites. The newly developed low-cost materials are promising for specific applications in aerospace electronic devices, especially regarding extreme temperatures.

  16. Organic carbon and nitrogen source of sunken wood communities on continental shelves around Japan inferred from stable isotope ratios

    Science.gov (United States)

    Nishimoto, Atsushi; Mito, Saeko; Shirayama, Yoshihisa

    2009-09-01

    The food source for animals associated with sunken wood on the deep-sea floor has not been clearly identified. In the present study, we analyzed carbon- and nitrogen-stable isotope ratios of these animals to clarify (a) whether or not species that are potentially able to ingest wood (direct user) really digest and use it as their food source in situ, or (b) whether or not sunken wood is the organic source for the species that cannot feed on it directly (indirect user). The average isotopic values of the direct user, wood-boring bivalves, were δ 13C:-24.14±0.38‰ ( n=13) and δ 15N:4.05±0.27‰ ( n=11). The value of δ 15N was close to that of their host wood (1.97±1.87‰ ( n=7)) and lower than that of suspended particles assumed from that of suspension feeding species, suggesting that direct users do not use either their host wood or suspended particles as their nitrogen source. Given ambient nitrogen gas value (δ 15N: around 0.5‰), bacteria symbiotic with the direct user appear to autotrophically fix ambient nitrogen gas and the bacteria are probably the major nitrogen source for the direct user. The average δ 13C of wood was -26.85±1.13‰ ( n=7), suggesting that wood is the carbon source of the direct user. On the other hand, the average δ 13C of the indirect user (-23.29±0.99‰ ( n=27)) was distinctly higher than that of wood and they were considered to use organic matter derived from both phytoplankton and their host wood.

  17. CARACTHERIZATION OF BIOMASS ENERGY AND CARBONIZATION OF COFFEE GRAINS (Coffea arabica, L) AND (Cedrelinga catenaeformis), DUKE WOOD RESIDUES

    OpenAIRE

    Ailton Teixeira do Vale; Luiz Vicente Gentil; Joaquim Carlos Gonçalez; Alexandre Florian da Costa

    2007-01-01

    Brazil produces annually two million tons of coffee s husks from farms or industrial processing units. This wastematerial can be used for energy production; currently it is mainly used in agricultural practices as field straw cover up. This paperdeals with coffee s (Coffea arabica, L) husks biomass energy characteristics, including wood carbonization. As a reference, the samestudy was performed with a wood species regularly used for building construction named Cedrorana (Cedrelinga catenaefor...

  18. Purdue Plane Structures Analyzer II : a computerized wood engineering system

    Science.gov (United States)

    S. K. Suddarth; R. W. Wolfe

    1984-01-01

    The Purdue Plane Structures Analyzer (PPSA) is a computer program developed specifically for the analysis of wood structures. It uses recognized analysis procedures, in conjunction with recommendations of the 1982 National Design Specification for Wood Construction, to determine stresses and deflections of wood trusses and frames. The program offers several options for...

  19. Impact of warming and drought on carbon balance related to wood formation in black spruce.

    Science.gov (United States)

    Deslauriers, Annie; Beaulieu, Marilène; Balducci, Lorena; Giovannelli, Alessio; Gagnon, Michel J; Rossi, Sergio

    2014-08-01

    Wood formation in trees represents a carbon sink that can be modified in the case of stress. The way carbon metabolism constrains growth during stress periods (high temperature and water deficit) is now under debate. In this study, the amounts of non-structural carbohydrates (NSCs) for xylogenesis in black spruce, Picea mariana, saplings were assessed under high temperature and drought in order to determine the role of sugar mobilization for osmotic purposes and its consequences for secondary growth. Four-year-old saplings of black spruce in a greenhouse were subjected to different thermal conditions with respect to the outside air temperature (T0) in 2010 (2 and 5 °C higher than T0) and 2011 (6 °C warmer than T0 during the day or night) with a dry period of about 1 month in June of each year. Wood formation together with starch, NSCs and leaf parameters (water potential and photosynthesis) were monitored from May to September. With the exception of raffinose, the amounts of soluble sugars were not modified in the cambium even if gas exchange and photosynthesis were greatly reduced during drought. Raffinose increased more than pinitol under a pre-dawn water potential of less than -1 Mpa, presumably because this compound is better suited than polyol for replacing water and capturing free radicals, and its degradation into simple sugar is easier. Warming decreased the starch storage in the xylem as well the available hexose pool in the cambium and the xylem, probably because of an increase in respiration. Radial stem growth was reduced during drought due to the mobilization of NSCs for osmotic purposes and due to the lack of cell turgor. Thus plant water status during wood formation can influence the NSCs available for growth in the cambium and xylem. © The Author 2014. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  20. Sengon wood (Paraserianthes falcataria (L.) Nielsen) carbon as supporting material for electrochemical double layer capasitor

    Science.gov (United States)

    Wulandhari; Syarif, N.; Waruwu, I.; Ridho Prayogo, M.

    2017-07-01

    A microstructure carbon electrodes was potentially developed into energy storage device, i.e electrochemical double layer capacitor (EDLC) or super capacitor. The structure has a large surface that able to increased the capacitance of electrodes. Sengon Wood Carbon (SWC) was one of microstructure carbon which mainly has honeycomb structure. SWC was prepared hydrothermally along with microwave heating. SWC has 202 m2g-1 of surface area, 14,4 S.cm-1 of conductivity and crystalline carbon peak at 29.55° with honeycomb structure. Mixtures of honeycomb sengon carbon and graphite were casted it into thin layer electrode (TLE). The electrodes are fabricated into EDLC along with aluminum foil, and their performance are tested by using Galvanostatic and capacitance meter. TLE had 2.984 to 3.547 μF/g of capacitance, initial voltage of EDLC ranged from 0.67 to 0.42 V. Capacitance of 3 cm x 4 cm EDLC ranged from 30.6 to 60 μF. Galvanostatic Charge-Discharge (GCD) indicated that SWC suitable for EDLC application.

  1. Preparation, characterization and phenol adsorption capacity of activated carbons from African beech wood sawdust

    Directory of Open Access Journals (Sweden)

    N.T. Abdel-Ghani

    2016-05-01

    Full Text Available In the present study, different activated carbons were prepared from carbonized African beech wood sawdust by potassium hydroxide activation. The activated carbons were characterized by brunauer–emmett–teller, scanning electron microscope, fourier transform infrared spectroscopy, and thermogravimetric analyzer. The phenol adsorption capacity of the prepared carbons was evaluated. The different factors affecting phenol’s removal were studied including: contact time, solution pH and initial phenol concentration. The optimum phenol removal was obtained after a contact time of 300 min. and at an initial phenol solution pH 7. The maximum removal percentages were determined at 5mg/l initial phenol concentration as 79, 93, 94 and 98% for AC0, AC1, AC2 and AC3; respectively. The adsorption of phenol on African beech sawdust activated carbons was found to follow the Lagergren first order kinetics and the intraparticle diffusion mechanism gave a good fit to the experimental data. The isothermal models applied fitted the experimental data in the order: Langmuir> Dubinin–Radushkevich> Freundlich and Temkin.

  2. Ecological carbon sequestration via wood harvest and storage (WHS): Can it be a viable climate and energy strategy?

    Science.gov (United States)

    Zeng, N.; Zaitchik, B. F.; King, A. W.; Wullschleger, S. D.

    2016-12-01

    A carbon sequestration strategy is proposed in which forests are sustainably managed to optimal carbon productivity, and a fraction of the wood is selectively harvested and stored to prevent decomposition under anaerobic, dry or cold conditions. Because a large flux of CO2 is constantly assimilated into the world's forests via photosynthesis, cutting off its return pathway to the atmosphere forms an effective carbon sink. The live trees serve as a `carbon scrubber' or `carbon remover' that provides continuous sequestration (negative emissions). The stored wood is a semi-permanent carbon sink, but also serves as a `biomass/bioenergy reserve' that could be utilized in the future.Based on forest coarse wood production rate, land availability, bioconservation and other practical constraints, we estimate a carbon sequestration potential for wood harvest and storage (WHS) 1-3 GtC y-1. The implementation of such a scheme at our estimated lower value of 1 GtC y-1 would imply a doubling of the current world wood harvest rate. This can be achieved by harvesting wood at a modest harvesting intensity of 1.2 tC ha-1 y-1, over a forest area of 8 Mkm2 (800 Mha). To achieve the higher value of 3 GtC y-1, forests need to be managed this way on half of the world's forested land, or on a smaller area but with higher harvest intensity. However, the actual implementation may face challenges that vary regionally. We propose `carbon sequestration and biomass farms' in the tropical deforestation frontiers with mixed land use for carbon, energy, agriculture, as well as conservation. In another example, the forests damaged by insect infestation could be thinned to reduce fire and harvested for carbon sequestration.We estimate a cost of $10-50/tCO2 for harvest and storage around the landing site. The technique is low tech, distributed and reversible. We compare the potential of WHS with a number of other carbon sequestration methods. We will also show its impact on future land carbon sink

  3. Urban Wood-Based Bio-Energy Systems in Seattle

    Energy Technology Data Exchange (ETDEWEB)

    Stan Gent, Seattle Steam Company

    2010-10-25

    Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

  4. Hygrothermal Performance of West Coast Wood Deck Roofing System

    Energy Technology Data Exchange (ETDEWEB)

    Pallin, Simon B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kehrer, Manfred [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Desjarlais, Andre Omer [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-02-01

    Simulations of roofing assemblies are necessary in order to understand and adequately predict actual the hygrothermal performance. At the request of GAF, simulations have been setup to verify the difference in performance between white and black roofing membrane colors in relation to critical moisture accumulation for traditional low slope wood deck roofing systems typically deployed in various western U.S. Climate Zones. The performance of these roof assemblies has been simulated in the hygrothermal calculation tool of WUFI, from which the result was evaluated based on a defined criterion for moisture safety. The criterion was defined as the maximum accepted water content for wood materials and the highest acceptable moisture accumulation rate in relation to the risk of rot. Based on the criterion, the roof assemblies were certified as being either safe, risky or assumed to fail. The roof assemblies were simulated in different western climates, with varying insulation thicknesses, two different types of wooden decking, applied with varying interior moisture load and with either a high or low solar absorptivity at the roof surface (black or white surface color). The results show that the performance of the studied roof assemblies differs with regard to all of the varying parameters, especially the climate and the indoor moisture load.

  5. Secondary air systems for improved residential wood stove combustion

    Energy Technology Data Exchange (ETDEWEB)

    Poirot, R.L.; Sanborn, C.R.

    1982-12-21

    Three wood burning stoves were modified by the addition of preheated secondary air systems to keep burn volatile gases given off during the initial stage of combustion. This report describes the modifications and the performance of the stoves after modification. Stoves tested during the year's study included a Jotul 118, a Garrison IV and a Hearthstone I. After modification, total particulate emissions decreased in the three stoves by 56%, 69% and 4%, respectively. Flue gas CO/sub 2/ (a by-product of combustion and an indicator of the completeness of combustion) increased by 15%, 15% and 17%, respectively. Temperatures in the secondary combustion zones increased by 17%, 50% and 6%. On the basis of these measurements, other internal temperatures and visual observations, we believe the modifications significantly increased the combustion efficiencies of the Jotul and the Garrison. No improvement was discerned in the Hearthstone's performance (possibly due to unrealistic burn rate compared to firebox size). The design concepts developed, refined and tested under this year's study should be readily applicable to the majority of residential wood stoves on the market.

  6. Work and organisation in wood fuel systems. Provisional results from a pilot project

    Energy Technology Data Exchange (ETDEWEB)

    Ager, B. [Swedish Univ. of Agricultural Sciences, Dept. of Operational Efficiency, Garpenberg (Sweden); Soederqvist, A. [WE-Consulting AB, Tyresoe (Sweden)

    1996-12-31

    The use of wood fuels in Sweden has increased dramatically over the last few years. So far wood chips from tops and limbs and waste from the lumber/wood working industry have been the primary fuel sources. However, upgraded wood fuels, mainly in the shape of pellets, are rapidly gaining ground and used wood and short rotation forests are other sources under expansion. In the modern wood fuel sector new technology and production systems are being tested and introduced and new organisational structures and enterprises are developing. But rather few studies have been carried out concerning the conditions for the workers engaged in the production systems. An area which has attracted several studies is health hazards caused by various kinds of air pollutants, such as dust and moulds, but in most other areas knowledge is rather scarce. After a minor introductory study a comprehensive pilot project was formulated. The project is titled `Work and organisation in wood fuel systems` and will run from July 1996 to March 1998. The main objective of this project is to investigate working environment and work organisation in wood fuel systems in order to identify problems and ways of achieving improvement and development. This paper will discuss provisional results from studies of three selected production systems, which are especially common or expanding - harvest and transport of logging residues, production of wood pellets, and heating plants. (au)

  7. Waste wood as bioenergy feedstock. Climate change impacts and related emission uncertainties from waste wood based energy systems in the UK.

    Science.gov (United States)

    Röder, Mirjam; Thornley, Patricia

    2017-12-01

    Considering the urgent need to shift to low carbon energy carriers, waste wood resources could provide an alternative energy feedstock and at the same time reduce emissions from landfill. This research examines the climate change impacts and related emission uncertainties of waste wood based energy. For this, different grades of waste wood and energy application have been investigated using lifecycle assessment. Sensitivity analysis has then been applied for supply chain processes and feedstock properties for the main emission contributing categories: transport, processing, pelletizing, urea resin fraction and related N 2 O formation. The results show, depending on the waste wood grade, the conversion option, scale and the related reference case, that emission reductions of up to 91% are possible for non-treated wood waste. Compared to this, energy from treated wood waste with low contamination can achieve up to 83% emission savings, similar to untreated waste wood pellets, but in some cases emissions from waste wood based energy can exceed the ones of the fossil fuel reference - in the worst case by 126%. Emission reductions from highly contaminated feedstocks are largest when replacing electricity from large-scale coal and landfill. The highest emission uncertainties are related to the wood's resin fraction and N 2 O formation during combustion and, pelletizing. Comparing wood processing with diesel and electricity powered equipment also generated high variations in the results, while emission variations related to transport are relatively small. Using treated waste wood as a bioenergy feedstock can be a valid option to reduce emissions from energy production but this is only realisable if coal and landfill gas are replaced. To achieve meaningful emission reduction in line with national and international climate change targets, pre-treatment of waste wood would be required to reduce components that form N 2 O during the energy conversion. Copyright © 2017

  8. Light absorbing carbon in Europe - measurement and modelling, with a focus on residential wood combustion emissions

    Science.gov (United States)

    Genberg, J.; Denier van der Gon, H. A. C.; Simpson, D.; Swietlicki, E.; Areskoug, H.; Beddows, D.; Ceburnis, D.; Fiebig, M.; Hansson, H. C.; Harrison, R. M.; Jennings, S. G.; Saarikoski, S.; Spindler, G.; Visschedijk, A. J. H.; Wiedensohler, A.; Yttri, K. E.; Bergström, R.

    2013-04-01

    The atmospheric concentration of elemental carbon (EC) in Europe during the six-year period 2005-2010 has been simulated with the EMEP MSC-W model. The model bias compared to EC measurements is less than 20% for most of the examined sites. The model results suggest that fossil fuel combustion is the dominant source of EC in most of Europe but there are important contributions also from residential wood burning during the cold seasons and, during certain episodes, also from open biomass burning (wildfires and agricultural fires). The modelled contributions from open biomass fires to ground level concentrations of EC is small at the sites included in the present study, wood combustion has been applied. For some countries the new inventory has substantially different EC emissions compared to earlier estimates. For Northern Europe the most significant changes are much lower emissions in Norway and higher emissions in neighbouring Sweden and Finland. For Norway and Sweden, comparison to source-apportionment data from winter campaigns indicate that the new inventory may improve model calculated EC from wood burning. Finally, three different model setups were tested with variable atmospheric lifetimes of EC in order to evaluate the model sensitivity to the assumptions regarding hygroscopicity and atmospheric ageing of EC. The standard ageing scheme leads to a rapid transformation of the emitted hydrophobic EC to hygroscopic particles and generates similar results as assuming that all EC is aged at the point of emission. Assuming hydrophobic emissions and no ageing leads to higher EC concentrations. For the more remote sites, the observed EC concentration was in between the modelled EC using standard ageing and the scenario treating EC as hydrophobic. This could indicate too rapid EC ageing in the model in relatively clean parts of the atmosphere.

  9. Carbon stored in harvested wood products in Turkey and projections for 2020

    Directory of Open Access Journals (Sweden)

    Olivier Bouyer

    2016-01-01

    Full Text Available Turkey is an Annex-I country under the United Nations Framework Convention on Climate Change (UNFCCC and therefore submits its Greenhouse gases (GHG emissions and removals from anthropogenic sources to the UNFCCC secretariat on an annual basis, through a National GHG Inventory Report (NIR. GHG emissions and removals from Land Use, Land Use and Forestry (LULUCF constitute one of the main sectors in this report. One of the major land use categories in this sector is Forestland, and harvests in this category must be considered as a direct GHG emission to the atmosphere, unless the fate of the Harvested Wood Products (HWP is reported. In this study, we estimated the carbon sequestration in the HWP category of the Turkish NIR, according to the 2006 Guidelines for GHG inventory in the Agriculture, Forestry and Other Land Use (AFOLU sector, from the International Panel of Experts on Climate Change (IPCC. This is the first time such an estimate of carbon stocks and carbon stock changes in the HWP pool has been carried out in Turkey. The calculation has been done in Tier 2. We used United Nations Economic Commission for Europe (UNECE Timber database disaggregated figures for HWP produced in Turkey from 1964 to 2013. We focused on the two main HWP categories, which are sawnwood and wood-based panels. Comparing UNECE data series with Orman Genel Müdürlügü (OGM, the Republic of Turkey, General Directorate of Forestry data series for industrial roundwood over 1976-2013 (starting date for OGM data series, we noticed some anomalies (with UNECE data series as a basis: max: +47%, min = -23%, mean = +16%. Thus, the UNECE data on sawnwood and wood based panels were corrected based on OGM data. These anomalies could be due to: (i use of volume over bark for UNECE and volume under bark for OGM (+15% for volume over bark, and (ii integration of industrial roundwood coming from the private sector for UNECE. In order to ensure coherence, we then corrected the 1976

  10. Potential of forest management to reduce French carbon emissions - regional modelling of the French forest carbon balance from the forest to the wood.

    Science.gov (United States)

    Valade, A.; Luyssaert, S.; Bellassen, V.; Vallet, P.

    2015-12-01

    In France the low levels of forest harvest (40 Mm3 per year over a volume increment of 89Mm3) is frequently cited to push for a more intensive management of the forest that would help reducing CO2 emissions. This reasoning overlooks the medium-to-long-term effects on the carbon uptake at the national scale that result from changes in the forest's structure and delayed emissions from products decay and bioenergy burning, both determinant for the overall C fluxes between the biosphere and the atmosphere. To address the impacts of an increase in harvest removal on biosphere-atmosphere carbon fluxes at national scale, we build a consistent regional modeling framework to integrate the forest-carbon system from photosynthesis to wood uses. We aim at bridging the gap between regional ecosystem modeling and land managers' considerations, to assess the synergistic and antagonistic effects of management strategies over C-based forest services: C-sequestration, energy and material provision, fossil fuel substitution. For this, we built on inventory data to develop a spatial forest growth simulator and design a novel method for diagnosing the current level of management based on stand characteristics (density, quadratic mean diameter or exploitability). The growth and harvest simulated are then processed with a life cycle analysis to account for wood transformation and uses. Three scenarii describe increases in biomass removals either driven by energy production target (set based on national prospective with a lock on minimum harvest diameters) or by changes in management practices (shorter or longer rotations, management of currently unmanaged forests) to be compared with business as usual simulations. Our management levels' diagnostics quantifies undermanagement at national scale and evidences the large weight of ownership-based undermanagement with an average of 26% of the national forest (between 10% and 40% per species) and thus represents a huge potential wood resource

  11. Long-term influence of alternative forest management treatments on total ecosystem and wood product carbon storage

    Science.gov (United States)

    Joshua J. Puhlick; Aaron R. Weiskittel; Ivan J. Fernandez; Shawn Fraver; Laura S. Kenefic; Robert S. Seymour; Randall K. Kolka; Lindsey E. Rustad; John C. Brissette

    2016-01-01

    Developing strategies for reducing atmospheric CO2 is one of the foremost challenges facing natural resource professionals today. The goal of this study was to evaluate total ecosystem and harvested wood product carbon (C) stocks among alternative forest management treatments (selection cutting, shelterwood cutting, commercial clearcutting, and...

  12. Does reintroducing large wood influence the hydraulic landscape of a lowland river system?

    Science.gov (United States)

    Matheson, Adrian; Thoms, Martin; Reid, Michael

    2017-09-01

    Our understanding of the effectiveness of reintroduced large wood for restoration is largely based on studies from high energy river systems. By contrast, few studies of the effectiveness of reintroducing large wood have been undertaken on large, low energy, lowland river systems: river systems where large wood is a significant physical feature on the in-channel environment. This study investigated the effect of reintroduced large wood on the hydraulic landscape of the Barwon-Darling River, Australia, at low flows. To achieve this, the study compared three hydraulic landscapes of replicated reference (naturally wooded), control (unwooded,) and managed (wood reintroduced) treatments on three low flow periods. These time periods were prior to the reintroduction of large wood to managed reaches; several months after the reintroduction of large wood into the managed reaches; and then more than four years after wood reintroduction following several large flood events. Hydraulic landscapes of reaches were characterised using a range of spatial measures calculated from velocity measurements taken with a boat-mounted Acoustic Doppler Profiler. We hypothesised that reintroduced large wood would increase the diversity of the hydraulic landscape at low flows and that managed reaches would be more similar to the reference reaches. Our results suggest that the reintroduction of large wood did not significantly change the character of the hydraulic landscape at the reach scale after several months (p = 0.16) or several years (p = 0.29). Overall, the character of the hydraulic landscape in the managed reaches was more similar to the hydraulic landscape of the control reaches than the hydraulic landscape of the reference reaches, at low flows. Some variability in the hydraulic landscapes was detected over time, and this may reflect reworking of riverbed sediments and sensitivity to variation in discharge. The lack of a response in the low flow hydraulic landscape to the

  13. Carbon Footprint versus Performance of Aluminum, Plastic, and Wood Window Frames from Cradle to Gate

    Directory of Open Access Journals (Sweden)

    Andreja Kutnar

    2012-12-01

    Full Text Available Window frame material has significant impact on the thermal performance of the window. Moreover, with sustainable design becoming a necessity, window frame materials need to have higher levels of environmental performance to be considered sustainable. As a result, a holistic performance metric is needed to assess window frame material. Three similar frames were considered, manufactured from aluminum, polyvinyl chloride (PVC, and wood. First their thermal performance was evaluated and compared using a heat transfer model. Then, carbon footprints of the three materials were considered for 1m2 of window area with a similar thermal performance. It was found that the thermal, as well as the environmental, performance of the wooden window frame was superior to those of aluminum and PVC. On the other hand aluminum frames had high environmental impacts and comparatively lower thermal performance. This study provides a holistic viewpoint on window frames by considering both environmental and thermal performance.

  14. Thermal properties of wood reacted with a phosphorus pentoxide–amine system

    Science.gov (United States)

    Hong-Lin Lee; George C. Chen; Roger M. Rowell

    2004-01-01

    The objective of this research was to improve the fire-retardant properties of wood in one treatment using a phosphorus pentoxide–amine system. Phosphorus pentoxide and 16 amines including alkyl, halophenyl, and phenyl amines were compounded in N,N-dimethylformamide and the resulting solutions containing phosphoramides were reacted with wood. The characteristics of...

  15.  Thermal Insulation System Made of Wood and Paper for Use in Residential Construction

    Science.gov (United States)

    Zoltán Pásztory; Tibor Horváth; Samuel V. Glass; Samuel L. Zelinka

    2015-01-01

    This article introduces an insulation system that takes advantage of the low thermal conductivity of still air and is made of wood and paper. The insulation, called the Mirrorpanel, is constructed as a panel of closely spaced layers of coated paper and held together in a frame of wood or fiberboard. Panels have been fabricated and tested at the laboratory scale, whole...

  16. Discriminant analyzing system for wood wastes using a visible-near-infrared chemometric imaging technique.

    Science.gov (United States)

    Kobori, Hikaru; Yonenobu, Hitoshi; Noma, Junichi; Tsuchikawa, Satoru

    2008-08-01

    A new optical system was developed and applied to automated separation of wood wastes, using a combined technique of visible-near-infrared (Vis-NIR) imaging analysis and chemometrics. Three kinds of typical wood wastes were used, i.e., non-treated, impregnated, and plastic-film overlaid wood. The classification model based on soft independent modeling of class analogy (SIMCA) was examined using the difference luminance brightness of a sample. Our newly developed system showed a good/promising performance in separation of wood wastes, with an average rate of correct separation of 89%. Hence, it is concluded that the system is efficiently feasible for online monitoring and separation of wood wastes in recycling mills.

  17. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    Energy Technology Data Exchange (ETDEWEB)

    J. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2003-12-18

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this quarterly report, we present a preliminary comparison of the carbon sequestration benefits for two forest types used to convert abandoned grasslands for carbon sequestration. Annual mixed hardwood benefits, based on total stand carbon volume present at the end of a given year, range from a minimum of $0/ton of carbon to a maximum of $5.26/ton of carbon (low prices). White pine benefits based on carbon volume range from a minimum of $0/ton of carbon to a maximum of $18.61/ton of carbon (high prices). The higher maximum white pine carbon payment can primarily be attributed to the fact that the shorter rotation means that payments for white pine carbon are being made on far less cumulative carbon tonnage than for that of the long-rotation hardwoods. Therefore, the payment per ton of white pine carbon needs to be higher than that of the hardwoods in order to render the conversion to white pine profitable by the end of a rotation. These carbon payments may seem appealingly low to the incentive provider. However, payments (not discounted) made over a full rotation may add up to approximately $17,493/ha for white pine (30-year rotation), and $18,820/ha for mixed hardwoods (60-year rotation). The literature suggests a range of carbon sequestration costs, from $0/ton of carbon to $120/ton of carbon, although the majority of studies suggest a cost below $50/ ton of carbon, with van Kooten et al. (2000) suggesting a cutoff cost of $20/ton of carbon sequestered. Thus, the ranges of carbon payments estimated for this study fall well within the ranges of carbon sequestration costs estimated in previous studies.

  18. Comparison of stable carbon isotope ratios in the whole wood, cellulose and lignin of Oak tree-rings

    CSIR Research Space (South Africa)

    Loader, NJ

    2003-08-01

    Full Text Available ; Libby et al., 1976; Farmer and Baxter, 1974), but since Wilson and Grinsted (1977) demonstrated that di?erent com- ponents of wood di?er isotopically, most studies have concentrated on analysis of cellulose, as the dominant and most easily isolated....V., 1990. Environmental infor- mation in the isotopic record in trees. Phil Trans. R. Soc. London A 330, 427^439. Farmer, J.G., Baxter, M.S., 1974. Atmospheric carbon dioxide levels as indicated by the stable isotope record in wood. Nature 247, 273...

  19. Wood anatomy and carbon-isotope discrimination support long-term hydraulic deterioration as a major cause of drought-induced dieback.

    Science.gov (United States)

    Pellizzari, Elena; Camarero, J Julio; Gazol, Antonio; Sangüesa-Barreda, Gabriel; Carrer, Marco

    2016-06-01

    Hydraulic impairment due to xylem embolism and carbon starvation are the two proposed mechanisms explaining drought-induced forest dieback and tree death. Here, we evaluate the relative role played by these two mechanisms in the long-term by quantifying wood-anatomical traits (tracheid size and area of parenchyma rays) and estimating the intrinsic water-use efficiency (iWUE) from carbon isotopic discrimination. We selected silver fir and Scots pine stands in NE Spain with ongoing dieback processes and compared trees showing contrasting vigour (declining vs nondeclining trees). In both species earlywood tracheids in declining trees showed smaller lumen area with thicker cell wall, inducing a lower theoretical hydraulic conductivity. Parenchyma ray area was similar between the two vigour classes. Wet spring and summer conditions promoted the formation of larger lumen areas, particularly in the case of nondeclining trees. Declining silver firs presented a lower iWUE than conspecific nondeclining trees, but the reverse pattern was observed in Scots pine. The described patterns in wood anatomical traits and iWUE are coherent with a long-lasting deterioration of the hydraulic system in declining trees prior to their dieback. Retrospective quantifications of lumen area permit to forecast dieback in declining trees 2-5 decades before growth decline started. Wood anatomical traits provide a robust tool to reconstruct the long-term capacity of trees to withstand drought-induced dieback. © 2016 John Wiley & Sons Ltd.

  20. Structure–property characterization of the crinkle-leaf peach wood phenotype: a future model system for wood properties research?

    Science.gov (United States)

    Alex C. Wiedenhoeft; Rafael Arévalo; Craig Ledbetter; Joseph E. Jakes

    2016-01-01

    Nearly 400 million years of evolution and field-testing by the natural world has given humans thousands of wood types, each with unique structure– property relationships to study, exploit, and ideally, to manipulate, but the slow growth of trees makes them a recalcitrant experimental system. Variations in wood features of two genotypes of peach (Prunus persica L.)...

  1. Analysis of three-year Wisconsin temperature histories for roof systems using wood, wood-thermoplastic composite, and fiberglass shingles

    Science.gov (United States)

    Jerrold E. Winandy; Cherilyn A. Hatfield

    2007-01-01

    Temperature histories for various types of roof shingles, wood roof sheathing, rafters, and nonventilated attics were monitored in outdoor attic structures using simulated North American light-framed construction. In this paper, 3-year thermal load histories for wood-based composite roof sheathing, wood rafters, and attics under western redcedar (WRC) shingles, wood-...

  2. Preparation of highly developed mesoporous activated carbon fiber from liquefied wood using wood charcoal as additive and its adsorption of methylene blue from solution.

    Science.gov (United States)

    Ma, Xiaojun; Zhang, Fan; Zhu, Junyan; Yu, Lili; Liu, Xinyan

    2014-07-01

    Activated carbon fiber (C-WACF) with super high surface area and well-developed small mesopores were prepared by liquefied wood and uses wood charcoal (WC) as additive. The characterization and properties of C-WACF were investigated by XRD, XPS and N2 adsorption. Results showed the pore development was significant at temperatures >750°C, and reached a maximum BET surface area (2604.7 m(2)/g) and total pore volume (1.433 cm(3)/g) at 850°C, of which 86.8% was from the contribution of the small mesopores of 2-4 nm. It was also found that the mesopore volume and methylene blue adsorption of C-WACF were highly increased as the temperature increases from 750 to 850°C. Additionally, the reduction of graphitic layers, the obvious changes of functional groups and the more unstable carbons on the surface of C-WACF, which played important roles in the formation of mesopores, were also observed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Geomorphic Influences on Large Wood Dam Loadings, Particulate Organic Matter and Dissolved Organic Carbon in an 0ld-Growth Northern Hardwood Watershed

    Science.gov (United States)

    P. Charles Goebel; Kurt S. Pregitzer; Brain J. Palik

    2003-01-01

    We quantified large wood loadings and seasonal concentrations of particulate organic matter (POM) and dissolved organic carbon (DOC) in three different geomonghic zones (each with unique hydrogeomorphic characteristics) of a pristine, old-growth northern hardwood watershed. The highest large wood dam loadings were in the high-gradient, bedrock controlled geomorphic...

  4. Stem wood properties of Populus tremuloides, Betula papyrifera and Acer saccharum saplings after three years of treatments to elevated carbon dioxide and ozone

    Science.gov (United States)

    Seija Kaakinen; Katri Kostiainen; Fredrik Ek; Pekka Saranpaa; Mark E. Kubiske; Jaak Sober; David F. Karnosky; Elina Vapaavuori

    2004-01-01

    The aim of this study was to examine the effects of elevated carbon dioxide [CO2] and ozone [O3] and their interaction on wood chemistry and anatomy of five clones of 3-year-old trembling aspen (Populus tremuloides Michx.). Wood chemistry was studied also on paper birch (Betula papyrifera...

  5. A multi-tiered approach for assessing the forestry and wood products industries' impact on the carbon balance.

    Science.gov (United States)

    Knauf, Marcus

    2015-12-01

    The forestry and wood products industries play a significant role in CO2 emissions reduction by increasing carbon stocks in living forest biomass and wood products. Moreover, wood can substitute for fossil fuels. Different methods can be used to assess the impact of regional forestry and wood products industries on regional CO2 emissions. This article considers three of those methods and combines them into a multi-tiered approach. The multi-tiered approach proposed in this article combines: 1) a Kyoto-Protocol-oriented method focused on changes in CO2 emissions resulting from regional industrial production, 2) a consumer-oriented method focused on changes in CO2 emissions resulting from regional consumption, and 3) a value-creation-oriented method focused on changes in CO2 emissions resulting from forest management and wood usage strategies. North Rhine-Westphalia is both a typical German state and an example of a region where each of these three methods yields different results. It serves as a test case with which to illustrate the advantages of the proposed approach. This case study argues that the choice of assessment methods is essential when developing and evaluating a strategy for reducing CO2 emissions. Emissions can be reduced through various social and economic processes. Since none of the assessment methods considered above is suitable for all of these processes, only a multi-tiered approach may ensure that strategy development results in an optimal emissions reduction strategy.

  6. Effect of carbon dioxide injection on production of wood cement composites from waste medium density fiberboard (MDF).

    Science.gov (United States)

    Qi, H; Cooper, P A; Wan, H

    2006-01-01

    The possibility of recycling waste medium density fiberboard (MDF) into wood-cement composites was evaluated. Both new fibers and recycled steam exploded MDF fibers had poor compatibility with cement if no treatment was applied, due to interference of the hydration process by the water soluble components of the fiber. However, this issue was resolved when a rapid hardening process with carbon dioxide injection was adopted. It appears that the rapid carbonation allowed the board to develop considerable strength before the adverse effects of the wood extractives could take effect. After 3-5 min of carbon dioxide injection, the composites reached 22-27% of total carbonation and developed 50-70% of their final (28-day) strength. Composites containing recycled MDF fibers had slightly lower splitting tensile strength and lower tensile toughness properties than those containing new fibers especially at a high fiber/cement ratio. Composites containing recycled MDF fibers also showed lower values of water absorption. Unlike composites cured conventionally, composites cured under CO(2) injection developed higher strength and toughness with increased fiber content. Incorporation of recycled MDF fibers into wood cement composites with CO(2) injection during the production stage presents a viable option for recycling of this difficult to manage waste material.

  7. A system for classifying wood-using industries and recording statistics for automatic data processing.

    Science.gov (United States)

    E.W. Fobes; R.W. Rowe

    1968-01-01

    A system for classifying wood-using industries and recording pertinent statistics for automatic data processing is described. Forms and coding instructions for recording data of primary processing plants are included.

  8. Estimated Thickness of Quaternary Sediment in the Wood River Valley aquifer system, South-Central Idaho

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset is the estimated thickness of Quaternary sediment of the Wood River Valley aquifer system. This isopach map was constructed by subtracting the estimated...

  9. Aquifer Boundary of the Wood River Valley Aquifer System, South-Central Idaho

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset contains the boundary of the Wood River Valley aquifer system as modified and expanded from that defined by Skinner and others (2007): It has been...

  10. Grand Kadowaki-Woods relation of heavy-fermion systems with degeneracy

    Energy Technology Data Exchange (ETDEWEB)

    Tsujii, N. [National Institute for Materials Science, Sengen 1-2-1, Tsukuba 305-0047 (Japan)]. E-mail: TSUJII.Naohito@nims.go.jp; Kontani, H. [Graduate School of Science, Nagoya University, Fro-cho, Chikusa-ku, Nagoya 464-8602 (Japan); Yoshimura, K. [Graduate School of Science, Kyoto University, Kyoto 606-8502 (Japan)

    2006-05-01

    Recent experimental and theoretical studies have revealed that the Kadowaki-Woods relation is not valid for heavy-fermion systems with large degeneracy, like intermediate-valence Yb- and Ce-compounds. Instead, we have successfully derived a new universal relation, namely, the grand Kadowaki-Woods relation for general degeneracy. This relation is found to be valid in the whole range of f-electron based systems with various degeneracies.

  11. The NASA Carbon Monitoring System

    Science.gov (United States)

    Hurtt, G. C.

    2015-12-01

    Greenhouse gas emission inventories, forest carbon sequestration programs (e.g., Reducing Emissions from Deforestation and Forest Degradation (REDD and REDD+), cap-and-trade systems, self-reporting programs, and their associated monitoring, reporting and verification (MRV) frameworks depend upon data that are accurate, systematic, practical, and transparent. A sustained, observationally-driven carbon monitoring system using remote sensing data has the potential to significantly improve the relevant carbon cycle information base for the U.S. and world. Initiated in 2010, NASA's Carbon Monitoring System (CMS) project is prototyping and conducting pilot studies to evaluate technological approaches and methodologies to meet carbon monitoring and reporting requirements for multiple users and over multiple scales of interest. NASA's approach emphasizes exploitation of the satellite remote sensing resources, computational capabilities, scientific knowledge, airborne science capabilities, and end-to-end system expertise that are major strengths of the NASA Earth Science program. Through user engagement activities, the NASA CMS project is taking specific actions to be responsive to the needs of stakeholders working to improve carbon MRV frameworks. The first phase of NASA CMS projects focused on developing products for U.S. biomass/carbon stocks and global carbon fluxes, and on scoping studies to identify stakeholders and explore other potential carbon products. The second phase built upon these initial efforts, with a large expansion in prototyping activities across a diversity of systems, scales, and regions, including research focused on prototype MRV systems and utilization of COTS technologies. Priorities for the future include: 1) utilizing future satellite sensors, 2) prototyping with commercial off-the-shelf technology, 3) expanding the range of prototyping activities, 4) rigorous evaluation, uncertainty quantification, and error characterization, 5) stakeholder

  12. The efficiency of different types of wood charcoal on increasing carbon content on surfaces of low carbon steel in the pack carburizing process

    Directory of Open Access Journals (Sweden)

    Narongsak Thammachot

    2014-09-01

    Full Text Available The purpose of this research is to compare the efficiency of five types of wood charcoal, eucalyptus, coconut shell, tamarind, bamboo and cassava root in increasing carbon content on surfaces of low carbon steel by the pack carburizing process. The experiment for pack carburized low carbon steel (grade AISI 1020 was conducted by using the different wood charcoals as carburizers, mixed with 10% limestone (by weight as the energizer. The carburizing temperature of 950°C, and carburizing times of 2, 4 and 6 hours were used in the experiment. After grinding, the specimens in each case were checked for carbon content by optical emission spectroscopy. Micro-Vickers hardness testing and microstructure inspections were carried out. The results of the experiment showed that the efficiency of eucalyptus charcoal as the carburizer (for increasing carbon content on surfaces of low carbon steel was higher than that of tamarind, cassava root, coconut shell and bamboo charcoals. The averages for carbon content were: 1.16, 1.06, 0.97, 0.83 and 0.77% respectively.

  13. Intelligent Heat System - High-Energy Efficient Wood Stoves with Low Emissions. Field Tests

    DEFF Research Database (Denmark)

    Illerup, Jytte Boll; Nickelsen, Joachim; Hansen, Brian Brun

    2014-01-01

    Wood stoves have the potential of providing CO2-neutral energy without transmission loss—but with the significant drawbacks of high emissions of pollutants and particulate matter at low altitude close to private homes, and with an uneven heat release profile which produces non-optimal heating com...... in 2012. The automatic control system developed for wood stoves in this project ensures optimal combustion conditions, thereby minimizing the emissions throughout a complete wood log combustion cycle. This improved performance has been verified by field tests in private homes....

  14. Pedogenic carbonate stable isotopic evidence for wooded habitat preference of early Pleistocene tool makers in the Turkana Basin.

    Science.gov (United States)

    Quinn, Rhonda L; Lepre, Christopher J; Feibel, Craig S; Wright, James D; Mortlock, Richard A; Harmand, Sonia; Brugal, Jean-Philip; Roche, Hélène

    2013-07-01

    The origin and evolution of early Pleistocene hominin lithic technologies in Africa occurred within the context of savanna grassland ecosystems. The Nachukui Formation of the Turkana Basin in northern Kenya, containing Oldowan and Acheulean tool assemblages and fossil evidence for early members of Homo and Paranthropus, provides an extensive spatial and temporal paleosol record of early Pleistocene savanna flora. Here we present new carbon isotopic (δ(13)CVPDB) values of pedogenic carbonates (68 nodules, 193 analyses) from the Nachukui Formation in order to characterize past vegetation structure and change through time. We compared three members (Kalochoro, Kaitio, and Natoo) at five locations spanning 2.4-1.4Ma and sampled in proximity to hominin archaeological and paleontological sites. Our results indicate diverse habitats showing a mosaic pattern of vegetation cover at each location yet demonstrate grassland expansion through time influenced by paleogeography. Kalochoro floodplains occurred adjacent to large river systems, and paleosols show evidence of C3 woodlands averaging 46-50% woody cover. Kaitio habitats were located along smaller rivers and lake margins. Paleosols yielded evidence for reduced portions of woody vegetation averaging 34-37% woody cover. Natoo environments had the highest percentage of grasslands averaging 21% woody cover near a diminishing Lake Turkana precursor. We also compared paleosol δ(13)CVPDB values of lithic archaeological sites with paleosol δ(13)CVPDB values of all environments available to hominins at 2.4-1.4Ma in the Nachukui and Koobi Fora Formations. Grassy environments became more widespread during this interval; woody canopy cover mean percentages steadily decreased by 12%. However, significantly more wooded savanna habitats were present in the vicinity of lithic archaeological sites and did not mirror the basin-wide trend of grassland spread. Hominin lithic archaeological sites consistently demonstrated woody cover

  15. Development of newly designed wood burning systems with low emissions and high efficiency; Tehokkaan ja vaehaepaeaestoeisen puulaemmitysjaerjestelmaen kehittaeminen

    Energy Technology Data Exchange (ETDEWEB)

    Hyytiaeinen, H. [Tulisydaen Oy, Vantaa (Finland)

    1997-12-01

    The investigations in the project will focus on the combustion behaviour of wood burning systems of untreated wood fuels with batch-wise and quasi-continuous mechanical feeding. The objectives will be to minimise the pollutant release of these combustion systems during the different operational phases by a consequent optimisation of the fuel burning technique and to reduce the CO release by increasing the efficiency of the combustion. To reduce the pollutant release during the operation phases and to increase the efficiency, products of incomplete combustion i.e. carbon monoxide, toxic organic compounds like benzene, polycyclic aromatic hydrocarbons and soot have to be minimised in a further extent. For that the following goals will be attained: improvement of the mixing process of combustion gases in the reaction zones, averaging the residence time spectrum in the burnout zone reduction, of emissions during initial and burnout phase in firings with batch-wise feeding reduction of emissions under partial-load conditions in firings with quasi-continuous feeding, higher combustion stability even in case of changing fuel qualities, defining guidelines for the design of stoves and boilers with low emissions and high efficiency. By the foreseen reduction of the pollutant release and improved efficiency the environmental acceptance of wood combustion firings can be increased and for instance local restrictions can be removed. The project is funded in part by The European Commission in the framework of The Non Nuclear Energy Programme. (orig.)

  16. An expert system for ranking companies and investments: wood industry case

    Directory of Open Access Journals (Sweden)

    Hliadis Lazaros

    2003-01-01

    Full Text Available Wood industry is a very important part of both the Greek Rural and industrial sector. The discovery of the differentiation in the level of growth and in the quality of financial management between the Greek wood companies can provide very important aid in the design of an effective rural development policy. The evaluation and ranking of Greek wood companies based on actual financial data is a very complicated task and it requires expertise knowledge and skills. On the other hand a computer expert system can perform validation and evaluation in an efficient way and can substitute human experts. An expert system was designed and developed towards this direction. It uses multicriteria analysis for each one of the wood companies based on actual financial data and it applies fundamental principles of fuzzy logic in order to calculate the expected intervals of flows for the following years. .

  17. System optimisation of automatic wood-fired heating systems; Systemoptimierung automatischer Holzheizungen

    Energy Technology Data Exchange (ETDEWEB)

    Good, J.; Nussbaumer, T. [Verenum, Zuerich (Switzerland); Jenni, A. [Ardens GmbH, Liestal (Switzerland); Buehler, R. [Umwelt und Energie, Maschwanden (Switzerland)

    2005-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) discusses a system optimisation method that is being offered to operators of automatic wood-fired heating systems with ratings between 300 kW and 1 MW. The results of a survey covering 30 Swiss installations are presented and the measures recommended for improvements in performance are discussed. The report reviews the state of the installations as far as technology and financial feasibility are concerned and also takes a look at various methods of determining the annual operating efficiency of wood-fired installations as well as the limits posed on such methods. Commercial considerations that should be taken into account when planning and operating such installations are discussed. Extensive recommendations are made to manufacturers, purchasers and operators of the installations.

  18. The Effect of Carbon Nanotubes on the Mechanical Properties of Wood Plastic Composites by Selective Laser Sintering

    Directory of Open Access Journals (Sweden)

    Yunhe Zhang

    2017-12-01

    Full Text Available Wood-plastic composites (WPCs made by selective laser sintering (SLS approach of 3D printing offer many advantages over single polymer materials, such as low cost, sustainability, and better sintering accuracy. However, WPCs made via SLS are too weak to have widespread applications. In order to increase the mechanical properties of WPCs, a novel type of WPCs containing 0, 0.05, 0.1 and 0.15 wt % carbon nanotubes (CNT, 14 wt % wood fibers, 86 wt % polyether sulfone (PES was manufactured via SLS. The experimental results showed that the addition of small amount of CNTs can significantly increase the mechanical properties of the wood/PES composite material. The tensile strength, bending strength, and elasticity modulus were 76.3%, 227.9%, and 128.7% higher with 0.1 wt % CNTs than those without CNTs. The mechanical properties of specimens first increased and then decreased with the addition of CNTs. The SEM results of the specimens’ fracture morphology indicate that the preferable bonding interfaces between wood flour grains and PES grains were achieved by adding CNTs to the composites. There are two reasons why the composites possessed superior mechanical properties: CNTs facilitate the laser sintering process of WPCs due to their thermal conductivities, and CNTs directly reinforce WPCs.

  19. Toward transformational carbon capture systems

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C. [National Energy Technology Laboratory, U.S. Dept. of Energy, Pittsburgh PA (United States); Litynski, John T. [Office of Fossil Energy, U.S. Dept. of Energy, Washington DC (United States); Brickett, Lynn A. [National Energy Technology Laboratory, U.S. Dept. of Energy, Pittsburgh PA (United States); Morreale, Bryan D. [National Energy Technology Laboratory, U.S. Dept. of Energy, Pittsburgh PA (United States)

    2015-10-28

    This paper will briefly review the history and current state of Carbon Capture and Storage (CCS) research and development and describe the technical barriers to carbon capture. it will argue forcefully for a new approach to R&D, which leverages both simulation and physical systems at the laboratory and pilot scales to more rapidly move the best technoogies forward, prune less advantageous approaches, and simultaneously develop materials and processes.

  20. Preparation and analysis of carbonization products from Sugi (Cryptomeria japonica D. Don) wood; Sugi (Cryptomeria japonica D. Don) zai no tanka seiseibutsu no chosei to bunseki

    Energy Technology Data Exchange (ETDEWEB)

    Matsui, T.; Matsushita, Y.; Sugamoto, K.; Tokuda, Y. [Miyazaki University, Miyazaki (Japan). Faculty of Engineering; Kodama, K.; Nakata, K.; Oda, M.; Yamauchi, H. [Miyazaki Prefectural Institute of Industrial Technology, Miyazaki (Japan)

    2000-01-10

    The material balance of carbonization products (wood-gas, wood-vinegar, wood-tar and charcoal) prepared from the sapwood and the heartwood of Sugi (Cryptomeria japonica D. Don) at various temperatures was determined. The evolution of both carbon monoxide and carbon dioxide mainly occurred at the carbonization temperature below 600 degree C and that of hydrogen and methane at 600-800 degree C. Total yield of the wood-vinegar and the wood-tar was almost constant at 500-800 degree C. On the other hand, the yield of the charcoal decreased because of the evolution of the wood gas with an increase in carbonization temperature. The wood-vinegars prepared at the temperature over 400 degree C were found to consist of carboxylic acids such as acetic acid and propionic acid, methanol, acetone, furans, alkylphenols, guaiacols, cyclotene and maltol by capillary gas chromatography. Since the constituent varieties and contents of the wood-vinegars prepared at both 400 degree C and 800 degree C were very similar each other, the wood-vinegar of Sugi wood chiefly produced below 400 degree C. FT-IR spectra of the charcoals showed the generation of carbonyl and olefin groups at 300-400 degree C and then the formation of aromatic rings along with the disappearance of carbonyl groups over 600 degree C. The production of radical species in the charcoals carbonized at 300-600 degree C was observed by ESR, on the contrary, the charcoals carbonized over 700 degree C were inactive. The specific surface area and the pore volume of the charcoal of Sugi sapwood increased with an increase in carbonization temperature. The pH of charcoal-dispersed aqueous solution increased with an increase in carbonization temperature. The high adsorptive activity of the charcoal carbonized at 400 degree C for ammonia gas and that at 800 degree C for hydrogen sulfide gas seemed to be dependent on acidic and basic properties of the charcoals, respectively. (author)

  1. CARACTHERIZATION OF BIOMASS ENERGY AND CARBONIZATION OF COFFEE GRAINS (Coffea arabica, L AND (Cedrelinga catenaeformis, DUKE WOOD RESIDUES

    Directory of Open Access Journals (Sweden)

    Ailton Teixeira do Vale

    2007-12-01

    Full Text Available Brazil produces annually two million tons of coffee s husks from farms or industrial processing units. This wastematerial can be used for energy production; currently it is mainly used in agricultural practices as field straw cover up. This paperdeals with coffee s (Coffea arabica, L husks biomass energy characteristics, including wood carbonization. As a reference, the samestudy was performed with a wood species regularly used for building construction named Cedrorana (Cedrelinga catenaeformis,Duke. Coffee s husks was obtained from a farm 150 km far from Brasilia city and cedrorana sawdust from a local saw mill. Thispaper presents results from energy and biomass variables like moisture content, bulk density, lower and superior heating power, ashcontent, fixed carbon, volatile matter and volumetric energy. It has also studied carbonization, charcoal, pyroligneous licqor and noncondensablegases. A comparison between Coffee s husk with 0% moisture content and Cedrorana sawdust portrays the followingresults: bulk density 144.41 kg/m3, fixed carbon 10.31%, superior heating power 4.57 kWh (or 16.46 MJ or 3.933 Mcal/kg, charcoalcontent 40,64% and heating value per cubic meter 2,179 MJ/m3

  2. Exposures to high levels of carbon monoxide from wood-fired temazcal (steam bath) use in highland Guatemala.

    Science.gov (United States)

    Thompson, Lisa M; Clark, Michael; Cadman, Brie; Canúz, Eduardo; Smith, Kirk R

    2011-01-01

    The temazcal is a wood-fired steam bath used in the rural highlands of Guatemala for bathing and healing. We measured carbon monoxide (CO) among 288 participants in 72 temazcales. Participants were drawn from communities who participated in the RESPIRE (Randomized Exposure Study of Pollution Indoors and Respiratory Effects) chimney stove intervention trial. Temazcal CO exposures were extremely high, averaging 431 parts per million (time-weighted average). Compared to kitchen wood-smoke exposures, the temazcal contributes significantly to weekly exposures, despite the fact that the population spends less time in the temazcal than in the kitchen. This report 1) describes temazcal use patterns; 2) reports participants' signs and symptoms during temazcal use; 3) models the distribution of temazcal CO concentrations; 4) assesses reliability of exhaled breath CO as a biomarker of CO exposure; and 5) provides a proportional analysis of CO concentrations from temazcal use, as compared to kitchen concentrations.

  3. Estimates of carbon stored in harvested wood products from the United States forest service northern region, 1906-2010

    Directory of Open Access Journals (Sweden)

    Stockmann Keith D

    2012-01-01

    Full Text Available Abstract Background Global forests capture and store significant amounts of CO2 through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS and other agencies are interested in accurately accounting for carbon flux associated with harvested wood products (HWP to meet greenhouse gas monitoring commitments and climate change adaptation and mitigation objectives. This paper uses the Intergovernmental Panel on Climate Change (IPCC production accounting approach and the California Forest Project Protocol (CFPP to estimate HWP carbon storage from 1906 to 2010 for the USFS Northern Region, which includes forests in northern Idaho, Montana, South Dakota, and eastern Washington. Results Based on the IPCC approach, carbon stocks in the HWP pool were increasing at one million megagrams of carbon (MgC per year in the mid 1960s, with peak cumulative storage of 28 million MgC occurring in 1995. Net positive flux into the HWP pool over this period is primarily attributable to high harvest levels in the mid twentieth century. Harvest levels declined after 1970, resulting in less carbon entering the HWP pool. Since 1995, emissions from HWP at solid waste disposal sites have exceeded additions from harvesting, resulting in a decline in the total amount of carbon stored in the HWP pool. The CFPP approach shows a similar trend, with 100-year average carbon storage for each annual Northern Region harvest peaking in 1969 at 937,900 MgC, and fluctuating between 84,000 and 150,000 MgC over the last decade. Conclusions The Northern Region HWP pool is now in a period of negative net annual stock change because the decay of products harvested between 1906 and 2010 exceeds additions of carbon to the HWP pool through harvest. However, total forest carbon includes both HWP and ecosystem carbon, which may have increased over the study

  4. Estimates of carbon stored in harvested wood products from the United States forest service northern region, 1906-2010.

    Science.gov (United States)

    Stockmann, Keith D; Anderson, Nathaniel M; Skog, Kenneth E; Healey, Sean P; Loeffler, Dan R; Jones, Greg; Morrison, James F

    2012-01-13

    Global forests capture and store significant amounts of CO2 through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood products (HWP) to meet greenhouse gas monitoring commitments and climate change adaptation and mitigation objectives. This paper uses the Intergovernmental Panel on Climate Change (IPCC) production accounting approach and the California Forest Project Protocol (CFPP) to estimate HWP carbon storage from 1906 to 2010 for the USFS Northern Region, which includes forests in northern Idaho, Montana, South Dakota, and eastern Washington. Based on the IPCC approach, carbon stocks in the HWP pool were increasing at one million megagrams of carbon (MgC) per year in the mid 1960s, with peak cumulative storage of 28 million MgC occurring in 1995. Net positive flux into the HWP pool over this period is primarily attributable to high harvest levels in the mid twentieth century. Harvest levels declined after 1970, resulting in less carbon entering the HWP pool. Since 1995, emissions from HWP at solid waste disposal sites have exceeded additions from harvesting, resulting in a decline in the total amount of carbon stored in the HWP pool. The CFPP approach shows a similar trend, with 100-year average carbon storage for each annual Northern Region harvest peaking in 1969 at 937,900 MgC, and fluctuating between 84,000 and 150,000 MgC over the last decade. The Northern Region HWP pool is now in a period of negative net annual stock change because the decay of products harvested between 1906 and 2010 exceeds additions of carbon to the HWP pool through harvest. However, total forest carbon includes both HWP and ecosystem carbon, which may have increased over the study period. Though our emphasis is on the Northern Region

  5. Renewable wood fuel: Fuel feed system for a pulverized coal boiler. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    This report evaluates a pilot test program conducted by New York State Gas & Electric Corporation to evaluate the feasibility of co-firing a pulverized coal plant with renewable wood fuels. The goal was to establish that such a co-firing system can reduce air emissions while maintaining good operational procedures and cost controls. The test fuel feed system employed at Greenidge Station`s Boiler 6 was shown to be effective in feeding wood products. Emission results were promising and an economic analysis indicates that it will be beneficial to pursue further refinements to the equipment and systems. The report recommends further evaluation of the generation and emission impacts using woods of varied moisture contents and at varied Btu input rates to determine if a drying system would be a cost-effective option.

  6. The effect of straw and wood gasification biochar on carbon sequestration, selected soil fertility indicators and functional groups in soil

    DEFF Research Database (Denmark)

    Hansen, Veronika; Müller-Stöver, Dorette Sophie; Munkholm, Lars Juhl

    2016-01-01

    resulted in a high soil respiration rate, and about 80% of the added carbonwas respired at the end of the incubation.However, the addition of straw increased aggregate stability and decreased clay dispersibility. Results from Fourier ransformed infrared photoacoustic spectroscopy revealed a lower content...... stability against microbial degradation in biochar amended soil was related to highly condensed aromatic groups. Addition of nutrients (N, P and S) together with straw resulted in higher soil respiration compared to the straw treatment, but did not cause differences in other soil processes. Results fromthis......Annual removal of crop residues may lead to depletion of soil organic carbon and soil degradation. Gasification biochar (GB), the carbon-rich byproduct of gasification of biomass such as straw and wood chips, may be used formaintaining the soil organic carbon content and counteract soil degradation...

  7. Low-emission wood chip firing system. Emissionsarme Holzschnitzelfeuerung

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1992-07-01

    A need wood chip heating boiler with automatic ash removal is presented with which an operating temperature of 1100 - 1200deg C can be attained due to a new combustion chamber geometry with horizontal gas neck and fireclay lining. The combustion chamber is devided into three zones: drying and degassing zone, mixing zone and the combustion zone. Structure and mode of operation are explained with a schematic diagram. The plant complies with or even remains below the required emission limits of the LRV 92 (Air Pollution Abatement Regulation). (BWI).

  8. Structure, electrical resistivity, and thermal conductivity of beech wood biocarbon produced at carbonization temperatures below 1000°C

    Science.gov (United States)

    Parfen'eva, L. S.; Orlova, T. S.; Kartenko, N. F.; Smirnov, B. I.; Smirnov, I. A.; Misiorek, H.; Jezowski, A.; Muha, J.; Vera, M. C.

    2011-11-01

    This paper reports on measurements of the thermal conductivity κ and the electrical resistivity ρ in the temperature range 5-300 K, and, at 300 K, on X-ray diffraction studies of high-porosity (with a channel pore volume fraction of ˜47 vol %) of the beech wood biocarbon prepared by pyrolysis (carbonization) of tree wood in an argon flow at the carbonization temperature T carb = 800°C. It has been shown that the biocarbon template of the samples studied represents essentially a nanocomposite made up of amorphous carbon and nanocrystallites—"graphite fragments" and graphene layers. The sizes of the nanocrystallites forming these nanocomposites have been determined. The dependences ρ( T) and κ( T) have been measured for the samples cut along and perpendicular to the tree growth direction, thus permitting determination of the magnitude of the anisotropy of these parameters. The dependences ρ( T) and κ( T), which have been obtained for beech biocarbon samples prepared at T carb = 800°C, are compared with the data amassed by us earlier for samples fabricated at T carb = 1000 and 2400°C. The magnitude and temperature dependence of the phonon thermal conductivity of the nanocomposite making up the beech biocarbon template at T carb = 800°C have been found.

  9. Projection of U.S. forest sector carbon sequestration under U.S. and global timber market and wood energy consumption scenarios, 2010-2060

    Science.gov (United States)

    Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

    2012-01-01

    This study provides a modeling framework to examine change over time in U.S. forest sector carbon inventory (in U.S. timberland tree biomass and harvested wood products) for alternative projections of U.S. and global timber markets, including wood energy consumption, based on established IPCC/RPA scenarios. Results indicated that the U.S. forest sector’s projected...

  10. DEVELOPMENT OF A NO-VOC/NO-HAP WOOD FURNITURE COATINGS SYSTEM

    Science.gov (United States)

    The report gives results of the development and demonstration of a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating system. The performance characteristics of the new coating system are excellent in terms of adhesion, drying time, gloss, ...

  11. Anaerobic carbon monoxide dehydrogenase diversity in the homoacetogenic hindgut microbial communities of lower termites and the wood roach.

    Directory of Open Access Journals (Sweden)

    Eric G Matson

    Full Text Available Anaerobic carbon monoxide dehydrogenase (CODH is a key enzyme in the Wood-Ljungdahl (acetyl-CoA pathway for acetogenesis performed by homoacetogenic bacteria. Acetate generated by gut bacteria via the acetyl-CoA pathway provides considerable nutrition to wood-feeding dictyopteran insects making CODH important to the obligate mutualism occurring between termites and their hindgut microbiota. To investigate CODH diversity in insect gut communities, we developed the first degenerate primers designed to amplify cooS genes, which encode the catalytic (β subunit of anaerobic CODH enzyme complexes. These primers target over 68 million combinations of potential forward and reverse cooS primer-binding sequences. We used the primers to identify cooS genes in bacterial isolates from the hindgut of a phylogenetically lower termite and to sample cooS diversity present in a variety of insect hindgut microbial communities including those of three phylogenetically-lower termites, Zootermopsis nevadensis, Reticulitermes hesperus, and Incisitermes minor, a wood-feeding cockroach, Cryptocercus punctulatus, and an omnivorous cockroach, Periplaneta americana. In total, we sequenced and analyzed 151 different cooS genes. These genes encode proteins that group within one of three highly divergent CODH phylogenetic clades. Each insect gut community contained CODH variants from all three of these clades. The patterns of CODH diversity in these communities likely reflect differences in enzyme or physiological function, and suggest that a diversity of microbial species participate in homoacetogenesis in these communities.

  12. Structure-function characterization of the crinkle-leaf peach wood phenotype: a future model system for wood properties research?

    Science.gov (United States)

    Variations in wood features of two genotypes of Prunus persica L. trees, wild-type and crinkle-leaf, were examined to elucidate the nature of weak wood in crinkle-leaf trees. Trees from three vigor classes (low, average, and high) of each genotype were sampled. No meaningful tendency of dissimilarit...

  13. Effective Remediation of Lead Ions from Aqueous Solution by Chemically Carbonized Rubber Wood Sawdust: Equilibrium, Kinetics, and Thermodynamic Study

    Directory of Open Access Journals (Sweden)

    Swarup Biswas

    2015-01-01

    Full Text Available Rubber wood sawdust was carbonized into charcoal by chemical treatment which was used for removal of lead ion from aqueous solution. The work involves batch experiments to investigate the pH effect, initial concentration of adsorbate, contact time, and adsorbent dose. Experimental data confirmed that the adsorption capacities increased with increasing inlet concentration and bed height and decreased with increasing flow rate. Adsorption results showed a maximum adsorption capacity of 37 mg/g at 308 K. Langmuir, Freundlich, and Temkin model adsorption isotherm models were applied to analyze the process where Temkin was found as a best fitted model for present study. Simultaneously kinetics of adsorption like pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were investigated. Thermodynamic parameters were used to analyze the adsorption experiment. Fourier transform infrared spectroscopy, scanning electron microscope, and energy dispersive X-ray spectroscopy confirmed the batch adsorption of lead ion onto chemically carbonized rubber wood sawdust.

  14. Structure and Photocatalytic Properties of Mn-Doped TiO₂ Loaded on Wood-Based Activated Carbon Fiber Composites.

    Science.gov (United States)

    Ma, Xiaojun; Zhou, Wanru; Chen, Yin

    2017-06-09

    Mn-doped TiO₂ loaded on wood-based activated carbon fiber (Mn/TiO₂-WACF) was prepared by sol-gel and impregnation method using MnSO₄·H₂O as manganese source. The structure of Mn/TiO₂-WACF was characterized by SEM, XRD, FTIR, N₂ adsorption and UV-Vis, and its photocatalytic activity for methylene blue degradation was investigated. Results show that Mn-doped TiO₂ were loaded on the surface of wood-based activated carbon fiber with high-development pore structures. The crystallite sizes of Mn-doped TiO₂ in composites were smaller than that of the undoped samples. With an increase of Mn doping content, Ti-O bending vibration intensity of Mn/TiO₂-WACF increased and then decreased. Moreover, Ti-O-Ti and Ti-O-Mn absorption peaks increased upon doping of Mn. Mn/TiO₂-WACF with low specific surface area, and pore volume was improved at 3.5-6.0 nm of mesopore distributions due to the Mn-doped TiO₂ load. In addition, the UV-Vis showed that Mn/TiO₂-WACF (photodegradation rate of 96%) has higher photocatalytic activity than the undoped samples for methylene blue degradation under visible light irradiation.

  15. Vulnerability and resilience to droughts in South-West USA: carbon allocation and impact on wood and evaporative anatomy

    Science.gov (United States)

    Guerin, M. F.; von Arx, G.; McDowell, N. G.; Pockman, W.; Andreu-Hayles, L.; Gentine, P.

    2015-12-01

    Survival and distribution of conifers across the globe will depend on their adaptive potential to the new climatic conditions (warmer, more droughts, heat waves). Recent studies predicting forest evolution have mainly focused on understanding tree mortality processes (hydraulic failure, carbon starvation, biotic stresses). These explicit causes of mortality are also the result of unsuccessful adaptation on a longer period. Using a 7 years drought-irrigation experiment in New Mexico, USA, we investigated the response to water availability on structure-function interactions at the tree level. Bridging dendrology and physiology on multiple individuals of local Pinion pine, we observe a structural dynamics in i) wood anatomy ii) evaporative anatomy and a resulting functional dynamics in i) leaf water potential and ii) water use efficiency on multiple time scales (daily to interannual). These results emphasize the tight coupling between carbon allocation and the surface hydrologic cycle on longer time scales and its impact on resilience and mortality, which is not included in current generation land-surface models. figure: Wood anatomy obtained from a 5.2mm core of a Pinion Edulis from the experimental site - illustrating the variability of the water transport capacities accross years

  16. Geographic information system-based identification of suitable cultivation sites for wood-cultivated ginseng.

    Science.gov (United States)

    Beon, Mu Sup; Park, Jun Ho; Kang, Hag Mo; Cho, Sung Jong; Kim, Hyun

    2013-10-01

    Wood-cultivated ginseng, including roots in its dried form, is produced in forest land without using artificial facilities such as light barriers. To identify suitable sites for the propagation of wood-cultivated ginseng, factor combination technique (FCT) and linear combination technique (LCT) were used with geographic information system and the results were superimposed onto an actual wood-cultivated ginseng plantation. The LCT more extensively searched for suitable sites of cultivation than that by the FCT; further, the LCT probed wide areas considering the predominance of precipitous mountains in Korea. In addition, the LCT showed the much higher degree of overlap with the actual cultivation sites; therefore, the LCT more comprehensively reflects the cultivator's intention for site selection. On the other hand, the inclusion of additional factors for the selection of suitable cultivation sites and experts' opinions may enhance the effectiveness and accuracy of the LCT for site application.

  17. Crash test and evaluation of temporary wood sign support system for large guide signs.

    Science.gov (United States)

    2016-07-01

    The objective of this research task was to evaluate the impact performance of a temporary wood sign support : system for large guide signs. It was desired to use existing TxDOT sign hardware in the design to the extent possible. : The full-scale cras...

  18. Carbon sequestration via wood harvest and storage: An assessment of its harvest potential

    DEFF Research Database (Denmark)

    Zeng, Ning; King, Anthony W.; Zaitchik, Ben

    2013-01-01

    as protected areas, assuming 50% in the tropics and 20 % in temperate and boreal forests; (3) forests difficult to access due to steep terrain; (4) wood use for other purposes such as timber and paper. This ‘top-down’ approach yields aWHS potential 2.8 GtC y−1. Alternatively, a ‘bottom-up’ approach, assuming...

  19. Carbon Balance and Contribution of Harvested Wood Products in China Based on the Production Approach of the Intergovernmental Panel on Climate Change.

    Science.gov (United States)

    Ji, Chunyi; Cao, Wenbin; Chen, Yong; Yang, Hongqiang

    2016-11-12

    The carbon sequestration of harvested wood products (HWP) plays an important role in climate mitigation. Accounting the carbon contribution of national HWP carbon pools has been listed as one of the key topics for negotiation in the United Nations Framework Convention on Climate Change. On the basis of the revised Production Approach of the Intergovernmental Panel on Climate Change (2013) (IPCC), this study assessed the accounting of carbon stock and emissions from the HWP pool in China and then analyzed its balance and contribution to carbon mitigation from 1960 to 2014. Research results showed that the accumulated carbon stock in China's HWP carbon pool increased from 130 Teragrams Carbon (TgC) in 1960 to 705.6 TgC in 2014. The annual increment in the carbon stock rose from 3.2 TgC in 1960 to 45.2 TgC in 2014. The category of solid wood products accounted for approximately 95% of the annual amount. The reduction in carbon emissions was approximately twelve times that of the emissions from the HWP producing and processing stage during the last decade. Furthermore, the amount of carbon stock and emission reduction increased from 23 TgC in 1960 to 76.1 TgC in 2014. The annual contribution of HWP could compensate for approximately 2.9% of the national carbon dioxide emissions in China.

  20. Carbon Balance and Contribution of Harvested Wood Products in China Based on the Production Approach of the Intergovernmental Panel on Climate Change

    Directory of Open Access Journals (Sweden)

    Chunyi Ji

    2016-11-01

    Full Text Available The carbon sequestration of harvested wood products (HWP plays an important role in climate mitigation. Accounting the carbon contribution of national HWP carbon pools has been listed as one of the key topics for negotiation in the United Nations Framework Convention on Climate Change. On the basis of the revised Production Approach of the Intergovernmental Panel on Climate Change (2013 (IPCC, this study assessed the accounting of carbon stock and emissions from the HWP pool in China and then analyzed its balance and contribution to carbon mitigation from 1960 to 2014. Research results showed that the accumulated carbon stock in China’s HWP carbon pool increased from 130 Teragrams Carbon (TgC in 1960 to 705.6 TgC in 2014. The annual increment in the carbon stock rose from 3.2 TgC in 1960 to 45.2 TgC in 2014. The category of solid wood products accounted for approximately 95% of the annual amount. The reduction in carbon emissions was approximately twelve times that of the emissions from the HWP producing and processing stage during the last decade. Furthermore, the amount of carbon stock and emission reduction increased from 23 TgC in 1960 to 76.1 TgC in 2014. The annual contribution of HWP could compensate for approximately 2.9% of the national carbon dioxide emissions in China.

  1. Restoring Sustainable Forests on Appalachian Mined Lands for Wood Products, Renewable Energy, Carbon Sequestration, and Other Ecosystems Services

    Energy Technology Data Exchange (ETDEWEB)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2006-04-30

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. During this quarter we worked on methodologies for analyzing carbon in mine soils. A unique property of mine soils is the presence of coal and carboniferous rock particles that are present in mine soils in various sizes, quantities, and qualities. There is no existing method in the literature that may be of use for quantitative estimation of soil organic carbon (SOC) in mine soils that can successfully differentiate between pedogenic and geogenic carbon forms. In this report we present a detailed description of a 16-step method for measuring SOC in mine soils designed for and tested on a total of 30 different mine soil mixtures representing a wide spectrum of mine soils in the hard-rock region of the Appalachian coalfield. The proposed method is a combination of chemical procedure for carbonates removal, a thermal procedure for pedogenic C removal, and elemental C analysis procedure at 900 C. Our methodology provides a means to correct for the carbon loss from the more volatile constituents of coal fragments in the mine soil samples and another correction factor for the protected organic matter that can also remain unoxidized following thermal pretreatment. The correction factors for coal and soil material-specific SOM were based on carbon content loss from coal and SOM determined by a parallel thermal oxidation analysis of pure ground coal fragments retrieved from the same mined site as the soil samples and of coal-free soil rock fragments of sandstone and siltstone origin.

  2. Parameters determining the carbon isotopic composition of coal and fossil wood in the Early Miocene Oberdorf lignite seam (Styrian Basin, Austria)

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel, A.; Sachsenhofer, R.F.; Gratzer, R.; Lucke, A.; Puttmann, W. [University of Leoben, Leoben (Austria)

    2002-07-01

    Petrographical and geochemical data of gelified and ungelified fossil wood from the Early Miocene Oberdorf lignite seam (Styrian Basin, Austria) provide evidence that the early diagenetic, aerobic degradation of wood by fungi may be followed by further decomposition under reducing conditions by the activity of anaerobic bacteria. Based on the molecular compositions of terpenoid hydrocarbons, the wood fragments in the lignite are identified as gymnosperms. The mean carbon isotope values found for gymnosperms and coals (-24.2 parts per thousand and -24.7 parts per thousand, respectively) confirm the results from biomarker analyses indicating that the peat-forming vegetation of the Oberdorf seam was dominated by gymnosperm taxa. The results obtained from the Early Miocene Oberdorf lignite indicate that the carbon isotope ratios of the coals are primarily affected by varying contributions of different parts of whole-plant tissue, due to their different isotopic and molecular compositions (e.g. epicuticular leaf waxes, resins, wood) and their different decay-resistance against the early diagenetic changes involved in organic matter decomposition. Carbon cycling during anoxic decomposition of plant-derived organic matter is assumed to affect the {delta}-{sup 13}C values of coal. {delta}-{sup 13}C Values of wood and extracted cellulose are affected only to a minor extent.

  3. Some exploratory considerations of scale effects on the potential performance of wood energy conversion systems

    Science.gov (United States)

    Eggers, A. J., Jr.; Smith, B. A.; Tombaugh, L. W.

    1982-06-01

    Scale effects on the potential performance of wood energy conversion systems whose products might compete in many of the same diverse and dispersed markets as comparable products from fossil fuels are explored. The analytical approach is derived from the average total cost formulation of micro-economics which is configured to account for the factors of total cost rate for wood production, transportation, and conversion in systems with a given conversion efficiency and capacity. The exploratory systems analysis includes: systems elements and cost formulation; area production and associated transportation; point production and associated transportation; conversion system capacity effects; conversion plant learning curve effects; subsystem disaggregation, staging, and production rate effects, and conversion plant financing effects.

  4. Technologies for small scale wood-fueled combined heat and power systems

    Energy Technology Data Exchange (ETDEWEB)

    Houmann Jakobsen, H.; Houmoeller, S.; Thaaning Pedersen, L.

    1998-01-01

    The aim of this study is to describe and compare different technologies for small cogeneration systems (up to 2-3 MW{sub e}), based on wood as fuel. For decentralized cogeneration, i.e. for recovering energy from saw mill wood wastes or heat supply for small villages, it is vital to know the advantages and disadvantages of the different technologies. Also, for the decision-makers it is of importance to know the price levels of the different technologies. A typical obstacle for small wood cogeneration systems is the installation costs. The specific price (per kW) is usually higher than for larger plants or plants using fossil fuels. For a saw mill choosing between cogeneration and simple heat production, however, the larger installation costs are counter weighed by the sale of electricity, while the fuel consumption is the same. Whether it is profitable or not to invest in cogeneration is often hard to decide. For many years small wood cogeneration systems have been too expensive, leading to the construction of only heat producing systems due to too high price levels of small steam turbines. In recent years a great deal of effort has been put into research and developing of new technologies to replace this traditional steam turbine. Among these are: Steam engines; Stirling engines; Indirectly fired gas turbines; Pressurized down draft combustion. Along with the small scale traditional steam turbines, these technologies will be evaluated in this study. When some or all these technologies are fully developed and commercial, a strong means of reducing the strain on the environment and the greenhouse effect will be available, as the total efficiency is high (up to 90%) and wood is an energy source in balance with nature. (au) EFP-95. 19 refs.

  5. Associations between ambient wood smoke and other particulate pollutants and biomarkers of systemic inflammation, coagulation and thrombosis in cardiac patients.

    Science.gov (United States)

    Croft, Daniel P; Cameron, Scott J; Morrell, Craig N; Lowenstein, Charles J; Ling, Frederick; Zareba, Wojciech; Hopke, Philip K; Utell, Mark J; Thurston, Sally W; Thevenet-Morrison, Kelly; Evans, Kristin A; Chalupa, David; Rich, David Q

    2017-04-01

    Increased particulate air pollution has been associated with both an increased risk of myocardial infarction (MI) and adverse changes in cardiac biomarkers. Up to 30% of ambient wintertime fine particles (PM2.5) in Rochester, NY are from wood burning. Our study examined associations between ambient levels of a marker of wood smoke (Delta-C) and other particulate air pollutants and biomarkers of inflammation, coagulation and thrombosis. We measured blood concentrations of C-reactive protein (CRP), D-dimer, fibrinogen, P-selectin, platelet factor 4 (PF-4), von Willebrand factor (vWF), and myeloperoxidase (MPO) of 135 patients undergoing cardiac catheterization during the winters of 2011-2013. We coupled these data with hourly ambient concentrations of Delta-C, black carbon (BC; marker of traffic pollution), and ultrafine (10-100nm; UFP), accumulation mode (100-500nm; AMP), and fine particles (smoke. Increases in PM2.5, BC, AMP, and UFP concentrations in the previous 96h were also associated with adverse changes in markers of systemic inflammation and coagulation, but not with markers of endothelial cell dysfunction or platelet activation. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  6. Light-absorbing carbon in Europe - measurement and modelling, with a focus on residential wood combustion emissions

    Science.gov (United States)

    Genberg, J.; Denier van der Gon, H. A. C.; Simpson, D.; Swietlicki, E.; Areskoug, H.; Beddows, D.; Ceburnis, D.; Fiebig, M.; Hansson, H. C.; Harrison, R. M.; Jennings, S. G.; Saarikoski, S.; Spindler, G.; Visschedijk, A. J. H.; Wiedensohler, A.; Yttri, K. E.; Bergström, R.

    2013-09-01

    The atmospheric concentration of elemental carbon (EC) in Europe during the six-year period 2005-2010 has been simulated with the EMEP MSC-W model. The model bias compared to EC measurements was less than 20% for most of the examined sites. The model results suggest that fossil fuel combustion is the dominant source of EC in most of Europe but that there are important contributions also from residential wood burning during the cold seasons and, during certain episodes, also from open biomass burning (wildfires and agricultural fires). The modelled contributions from open biomass fires to ground level concentrations of EC were small at the sites included in the present study, wood combustion has been applied. For some countries the new inventory has substantially different EC emissions compared to earlier estimates. For northern Europe the most significant changes are much lower emissions in Norway and higher emissions in neighbouring Sweden and Finland. For Norway and Sweden, comparisons to source-apportionment data from winter campaigns indicate that the new inventory may improve model-calculated EC from wood burning. Finally, three different model setups were tested with variable atmospheric lifetimes of EC in order to evaluate the model sensitivity to the assumptions regarding hygroscopicity and atmospheric ageing of EC. The standard ageing scheme leads to a rapid transformation of the emitted hydrophobic EC to hygroscopic particles, and generates similar results when assuming that all EC is aged at the point of emission. Assuming hydrophobic emissions and no ageing leads to higher EC concentrations. For the more remote sites, the observed EC concentration was in between the modelled EC using standard ageing and the scenario treating EC as hydrophobic. This could indicate too-rapid EC ageing in the model in relatively clean parts of the atmosphere.

  7. Comparison between carbonization of wood charcoal with Al-triisopropoxide and alumina

    NARCIS (Netherlands)

    Bronsveld, P; Hata, T; Vystavel, T; DeHosson, J; Kikuchi, H; Nishimiya, K; Imamura, Y

    2006-01-01

    A comparison was made between the catalytic carbonization of biomass carbon suspended in Al-triisopropoxide and in biomass carbon mixed with 40 mu m sized Al2O3 particles. Both types of samples were plasma sintered during 5 min under an argon pressure of 50 MPa at temperatures up to 2200 degrees C.

  8. Carbon Monoxide Silicate Reduction System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Carbon Monoxide Silicate Reduction System (COSRS) is an innovative method that for the first time uses the strong reductant carbon monoxide to both reduce iron...

  9. A method countries can use to estimate changes in carbon stored in harvested wood products and the uncertainty of such estimates

    Science.gov (United States)

    Kenneth E. Skog; Kim Pingoud; James E. Smith

    2004-01-01

    A method is suggested for estimating additions to carbon stored in harvested wood products (HWP) and for evaluating uncertainty. The method uses data on HWP production and trade from several decades and tracks annual additions to pools of HWP in use, removals from use, additions to solid waste disposal sites (SWDS), and decay from SWDS. The method is consistent with...

  10. CO2FIX V2.0 : manual of a modeling framework for quantifying carbon sequestration in forest ecosystems and wood products

    NARCIS (Netherlands)

    Nabuurs, G.J.; Garza-Caligaris, J.F.; Kanninen, M.; Karjalainen, T.; Lapvetelainen, T.; Liski, J.; Masera, O.; Mohren, G.M.J.; Olgín, M.; Pussinen, A.; Schelhaas, M.J.

    2002-01-01

    This reports presents a manual of the CO2FIX V 2.0 model. CO2FIX V 2.0 is a simple bookkeeping model that converts volumetric net annual increment data (and additional parameters) to annual carbon stocks and fluxes of the forest ecosystem-soil-wood products chain. It calculates on the hectare scale

  11. Work and organisation in wood fuel systems; Arbete och organisation i traedbraenslesystem

    Energy Technology Data Exchange (ETDEWEB)

    Gellerstedt, S.; Soederqvist, A.; Ager, B.

    1999-11-01

    We have completed an exploratory analysis of the work environment and work organisation in wood fuel systems. The prime focus has been placed on wood fuel factories and district heating plants. Our findings show that the working conditions in these operations are relatively good. However, to keep the sector competitive, the working environment must be improved, particularly early in the production chain. Wood fuel involves the presence of dust, mould fungus and the risk of dust explosion and fire. The raw material is also of varying sizes and shapes, and is often contaminated, causing problems throughout the production chain. Other concerns shared with similar industrial operations include: accidents involving falls, noise and electromagnetic fields. General problems include traffic accidents, working at night or alone, on-call duty, and stress caused by time constraints. The content of the work in wood fuel factories and heating plants is relatively highly skilled, and has variety and stimulation. In large heating plants, there are hierarchical organisations with situations including friction between Operation and Maintenance subdivisions. The report gives suggestions on how the operations could be developed. For some issues there is local knowledge that should be disseminated throughout the industry. For other issues, like fires and serious accidents, the industry should collectively gather information. Areas that should be developed include safer and simpler maintenance, multi-skilled work teams, remote control of operations, as well as ways to guarantee the quality of the raw material 45 refs, 10 figs, 4 tabs

  12. The Fixation of New Alternative Wood Protection Systems by Means of Oil Treatment

    Directory of Open Access Journals (Sweden)

    Laura LIIBERT

    2011-11-01

    Full Text Available This paper focuses on the improvement of a combined impregnation process (CIP, also known as the Royal process. This treatment combines the protective properties of a wood protection agent and the hydrophobic properties of a subsequent oil treatment in a wood product. Copper-based wood preservatives, which are traditionally used in CIP, are very effective but their long-term future use is questionable because of environmental concerns, especially the toxicity against water-living organisms. There is a need for new environmentally friendly wood preservative systems for a use in CIP. The substitutes for copper used in this study are natural polymers and organic biocides. The aim of this research is to describe the fixation effectiveness of the following compounds: Chitosan, Propiconazole, Wolmanit CX-8, Tannin, fire protection agent, Alginate. The scots pine sapwood samples (50´25´15 mm were impregnated and oil treated. The treated products were analysed for their preservative-and oil-retention. Preservative fixation time influence on oil treatment was tested. The treated samples were leached according to EN84. Water samples were analyzed for the amount of active ingredient.http://dx.doi.org/10.5755/j01.ms.17.4.777

  13. Carbon and oxygen isotope ratios in wood constituents of Pinus halepensis as indicators of precipitation, temperature and vapour pressure deficit

    Energy Technology Data Exchange (ETDEWEB)

    Ferrio, J.P.; Voltas, J. [E.T.S.E.A.-Universitat de Lleida (Spain). Dept. de Produccio Vegetal i Ciencia Forestal

    2005-04-01

    Carbon and oxygen isotope compositions ({delta}{sup 13}C, {delta}{sup 18}O) in tree rings have been shown to bear relevant climatic signals. However, little is known about the interrelationship between both isotopes in wood constituents for species from other than relatively wet climates. We hypothesized that in a species adapted to temporary droughts (e.g. Pinus halepensis Mill.) the signal derived from {delta}{sup 18}O in precipitation would be hidden by the strong variability in leaf transpirative enrichment. To test this assumption, we compared the effect of precipitation, temperature and vapour pressure deficit (VPD) on {delta}{sup 18}O and {delta}{sup 13}C along 23 sites covering the ecological range for this species. We extracted the cores from the south side of four to six adult dominant trees per aspect (north/south) within each site. For each aspect and site, fragments of the period 1975-1999 were pooled and milled to a fine powder. To further test the postulated need for cellulose purification in the assessment of climatic information, we studied these relationships in whole and extracted wood, holocellulose and lignin. In all wood fractions, {delta}{sup 13}C was related to annual precipitation [r=0.58 (P< 0.01) to 0.78 (P< 0.001)] and VPD [r=0.53 (P< 0.01) to 0.57 (P< 0.01)]. In contrast, for {delta}{sup 18}O only holocellulose showed consistent relationships with climatic data, being strongly significant for VPD [r=0.66 (P< 0.001)]. However, it was unrelated to modelled {delta}{sup 18}O in precipitation, confirming that transpirative enrichment (driven by VPD) dampened the source signal in P. halepensis. The relationships between {delta}{sup 13}C and {delta}{sup 18}O were generally poor, regardless of the wood constituent, suggesting that although both variables were somewhat related to transpirative demand, they were relatively independent. This was further confirmed by building stepwise models using both isotopes to predict annual and seasonal

  14. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    Energy Technology Data Exchange (ETDEWEB)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2005-06-08

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in VA, WV, KY, OH, and PA mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots is 4.5 acres, and the complete installation at each site is 13.5 acres. During the reporting period we compiled and evaluated all soil properties measured on the study sites. Statistical analysis of the properties was conducted, and first year survival and growth of white pine, hybrid poplars, and native hardwoods was assessed. Hardwood species survived better at all sites than white pine or hybrid poplar. Hardwood survival across treatments was 80%, 85%, and 50% for sites in Virginia, West Virginia, and Ohio, respectively, while white pine survival was 27%, 41%, and 58%, and hybrid poplar survival was 37%, 41%, and 72% for the same sites, respectively. Hybrid poplar height and diameter growth were superior to those of the other species tested, with the height growth of this species reaching 126.6cm after one year in the most intensive treatment at the site in Virginia. To determine carbon in soils on these

  15. Home grown power plants - the case for wood-based energy systems in Sri Lanka

    Energy Technology Data Exchange (ETDEWEB)

    Kapadia, K. [University of California, Berkeley (United States). Energy and Resources Group

    2002-12-01

    The article is essentially an overview of the case for wood-based energy systems for Sri Lanka. Such systems are attractive in terms of being local, low-cost, and sustainable. However, development of such systems is hampered by insufficient political support, and concern over deforestation and waste in the context of the proposed large-scale biomass gasification. The article discusses benefits of the system, how it works, costs and economics and biomass potential. Other renewable energy systems discussed include solar, wind and hydro.

  16. Development of a low-emission automatic wood-chip firing system based on pyrolysis. Entwicklung einer emissionsarmen, automatischen Holzschnitzelfeuerung nach dem Vergaserprinzip

    Energy Technology Data Exchange (ETDEWEB)

    Graf, S. (ETH, Zurich (Switzerland))

    1991-05-01

    Within the framework of a project supported by the Commission for the Assistance of Scientific Research the prototype of a new wood chip firing has been developed. In this system wood is mainly thermally degassed. After the pyrolysis chamber the gas passes through a reduction chamber in which the nitrogen oxides evolved during degassing are reduced to elementary nitrogen. Then the combustion chamber follows which is equipped with fixed ceramic guide vanes which cause an angular momentum of the flame and thus ensure that the carbonization gases and combustion air are also in case of minimum load thoroughly mixed. After combustion the hot flue gases stream back around the pyrolysis chamber giving off a part of the heat and are then conducted to a heat exchanger. (BWI).

  17. Temporal Variation of Wood Density and Carbon in Two Elevational Sites of Pinus cooperi in Relation to Climate Response in Northern Mexico.

    Directory of Open Access Journals (Sweden)

    Marín Pompa-García

    Full Text Available Forest ecosystems play an important role in the global carbon cycle. Therefore, understanding the dynamics of carbon uptake in forest ecosystems is much needed. Pinus cooperi is a widely distributed species in the Sierra Madre Occidental in northern Mexico and future climatic variations could impact these ecosystems. Here, we analyze the variations of trunk carbon in two populations of P. cooperi situated at different elevational gradients, combining dendrochronological techniques and allometry. Carbon sequestration (50% biomass was estimated from a specific allometric equation for this species based on: (i variation of intra-annual wood density and (ii diameter reconstruction. The results show that the population at a higher elevation had greater wood density, basal area, and hence, carbon accumulation. This finding can be explained by an ecological response of trees to adverse weather conditions, which would cause a change in the cellular structure affecting the within-ring wood density profile. The influence of variations in climate on the maximum density of chronologies showed a positive correlation with precipitation and the Multivariate El Niño Southern Oscillation Index during the winter season, and a negative correlation with maximum temperature during the spring season. Monitoring previous conditions to growth is crucial due to the increased vulnerability to extreme climatic variations on higher elevational sites. We concluded that temporal variability of wood density contributes to a better understanding of environmental historical changes and forest carbon dynamics in Northern Mexico, representing a significant improvement over previous studies on carbon sequestration. Assuming a uniform density according to tree age is incorrect, so this method can be used for environmental mitigation strategies, such as for managing P. cooperi, a dominant species of great ecological amplitude and widely used in forest industries.

  18. Temporal Variation of Wood Density and Carbon in Two Elevational Sites of Pinus cooperi in Relation to Climate Response in Northern Mexico.

    Science.gov (United States)

    Pompa-García, Marín; Venegas-González, Alejandro

    2016-01-01

    Forest ecosystems play an important role in the global carbon cycle. Therefore, understanding the dynamics of carbon uptake in forest ecosystems is much needed. Pinus cooperi is a widely distributed species in the Sierra Madre Occidental in northern Mexico and future climatic variations could impact these ecosystems. Here, we analyze the variations of trunk carbon in two populations of P. cooperi situated at different elevational gradients, combining dendrochronological techniques and allometry. Carbon sequestration (50% biomass) was estimated from a specific allometric equation for this species based on: (i) variation of intra-annual wood density and (ii) diameter reconstruction. The results show that the population at a higher elevation had greater wood density, basal area, and hence, carbon accumulation. This finding can be explained by an ecological response of trees to adverse weather conditions, which would cause a change in the cellular structure affecting the within-ring wood density profile. The influence of variations in climate on the maximum density of chronologies showed a positive correlation with precipitation and the Multivariate El Niño Southern Oscillation Index during the winter season, and a negative correlation with maximum temperature during the spring season. Monitoring previous conditions to growth is crucial due to the increased vulnerability to extreme climatic variations on higher elevational sites. We concluded that temporal variability of wood density contributes to a better understanding of environmental historical changes and forest carbon dynamics in Northern Mexico, representing a significant improvement over previous studies on carbon sequestration. Assuming a uniform density according to tree age is incorrect, so this method can be used for environmental mitigation strategies, such as for managing P. cooperi, a dominant species of great ecological amplitude and widely used in forest industries.

  19. Preparation of highly porous carbon from fir wood by KOH etching and CO2 gasification for adsorption of dyes and phenols from water.

    Science.gov (United States)

    Wu, Feng-Chin; Tseng, Ru-Ling

    2006-02-01

    Fir wood was first carbonized for 1.5 h at 450 degrees C, then soaked in a KOH solution KOH/char ratio of 1, and last activated for 1 h at 780 degrees C. During the last hour CO2 was poured in for further activation for 0, 15, 30, and 60 min, respectively. Carbonaceous adsorbents with controllable surface area and pore structure were chemically activated from carbonized fir wood (i.e., char) by KOH etching and CO2 gasification. The pore properties, including the BET surface area, pore volume, pore size distribution, and pore diameter, of these activated carbons were first characterized by the t-plot method based on N2 adsorption isotherms. Fir-wood carbon activated with CO2 gasification from 0 to 60 min exhibited a BET surface area ranging from 1371 to 2821 m2 g(-1), with a pore volume significantly increased from 0.81 to 1.73 m2 g(-1). Scanning electron microscopic (SEM) results showed that the surfaces of honeycombed holes in these carbons were significantly different from those of carbons without CO2 gasification. The adsorption of methylene blue, basic brown 1, acid blue 74, p-nitrophenol, p-chlorophenol, p-cresol, and phenol from water on all the carbons studied was examined to check their chemical characteristics. Adsorption kinetics was in agreement with the Elovich equation, and all equilibrium isotherms were in agreement with the Langmuir equation. These results were used to compare the Elovich parameter (1/b) and the adsorption quantity of the unit area (q(mon)/Sp) of activated carbons with different CO2 gasification durations. This work facilitated the preparation of activated carbon by effectively controlling pore structures and the adsorption performance of the activated carbon on adsorbates of different molecular forms.

  20. Activation of Aspen Wood with Carbon Dioxide and Phosphoric Acid for Removal of Total Organic Carbon from Oil Sands Produced Water: Increasing the Yield with Bio-Oil Recycling

    Science.gov (United States)

    Veksha, Andrei; Bhuiyan, Tazul I.; Hill, Josephine M.

    2016-01-01

    Several samples of activated carbon were prepared by physical (CO2) and chemical (H3PO4) activation of aspen wood and tested for the adsorption of organic compounds from water generated during the recovery of bitumen using steam assisted gravity drainage. Total organic carbon removal by the carbon samples increased proportionally with total pore volume as determined from N2 adsorption isotherms at −196 °C. The activated carbon produced by CO2 activation had similar removal levels for total organic carbon from the water (up to 70%) to those samples activated with H3PO4, but lower yields, due to losses during pyrolysis and activation. A method to increase the yield when using CO2 activation was proposed and consisted of recycling bio-oil produced from previous runs to the aspen wood feed, followed by either KOH addition (0.48%) or air pretreatment (220 °C for 3 h) before pyrolysis and activation. By recycling the bio-oil, the yield of CO2 activated carbon (after air pretreatment of the mixture) was increased by a factor of 1.3. Due to the higher carbon yield, the corresponding total organic carbon removal, per mass of wood feed, increased by a factor of 1.2 thus improving the overall process efficiency. PMID:28787817

  1. Activation of Aspen Wood with Carbon Dioxide and Phosphoric Acid for Removal of Total Organic Carbon from Oil Sands Produced Water: Increasing the Yield with Bio-Oil Recycling

    Directory of Open Access Journals (Sweden)

    Andrei Veksha

    2016-01-01

    Full Text Available Several samples of activated carbon were prepared by physical (CO2 and chemical (H3PO4 activation of aspen wood and tested for the adsorption of organic compounds from water generated during the recovery of bitumen using steam assisted gravity drainage. Total organic carbon removal by the carbon samples increased proportionally with total pore volume as determined from N2 adsorption isotherms at −196 °C. The activated carbon produced by CO2 activation had similar removal levels for total organic carbon from the water (up to 70% to those samples activated with H3PO4, but lower yields, due to losses during pyrolysis and activation. A method to increase the yield when using CO2 activation was proposed and consisted of recycling bio-oil produced from previous runs to the aspen wood feed, followed by either KOH addition (0.48% or air pretreatment (220 °C for 3 h before pyrolysis and activation. By recycling the bio-oil, the yield of CO2 activated carbon (after air pretreatment of the mixture was increased by a factor of 1.3. Due to the higher carbon yield, the corresponding total organic carbon removal, per mass of wood feed, increased by a factor of 1.2 thus improving the overall process efficiency.

  2. Climate seasonality limits leaf carbon assimilation and wood productivity in tropical forests

    NARCIS (Netherlands)

    Wagner, Fabien H.; Hérault, Bruno; Bonal, Damien; Stahl, Clément; Anderson, Liana O.; Baker, Timothy R.; Becker, Gabriel Sebastian; Beeckman, Hans; Boanerges Souza, Danilo; Botosso, Paulo Cesar; Bowman, David M.J.S.; Bräuning, Achim; Brede, Benjamin; Brown, Foster Irving; Camarero, Jesus Julio; Camargo, Plínio Barbosa; Cardoso, Fernanda C.G.; Carvalho, Fabrício Alvim; Castro, Wendeson; Chagas, Rubens Koloski; Chave, Jérome; Chidumayo, Emmanuel N.; Clark, Deborah A.; Costa, Flavia Regina Capellotto; Couralet, Camille; Silva Mauricio, Da Paulo Henrique; Dalitz, Helmut; Castro, De Vinicius Resende; Freitas Milani, De Jaçanan Eloisa; Oliveira, De Edilson Consuelo; Souza Arruda, De Luciano; Devineau, Jean-Louis; Drew, David M.; Dünisch, Oliver; Durigan, Giselda; Elifuraha, Elisha; Fedele, Marcio; Ferreira Fedele, Ligia; Figueiredo Filho, Afonso; Finger, César Augusto Guimarães; Franco, Augusto César; Freitas Júnior, João Lima; Galvão, Franklin; Gebrekirstos, Aster; Gliniars, Robert; Lima De Alencastro Graça, Paulo Maurício; Griffiths, Anthony D.; Grogan, James; Guan, Kaiyu; Homeier, Jürgen; Kanieski, Maria Raquel; Kho, Lip Khoon; Koenig, Jennifer; Kohler, Sintia Valerio; Krepkowski, Julia; Lemos-filho, José Pires; Lieberman, Diana; Lieberman, Milton Eugene; Lisi, Claudio Sergio; Longhi Santos, Tomaz; López Ayala, José Luis; Maeda, Eduardo Eijji; Malhi, Yadvinder; Maria, Vivian R.B.; Marques, Marcia C.M.; Marques, Renato; Maza Chamba, Hector; Mbwambo, Lawrence; Melgaço, Karina Liana Lisboa; Mendivelso, Hooz Angela; Murphy, Brett P.; O'Brien, Joseph J.; Oberbauer, Steven F.; Okada, Naoki; Pélissier, Raphaël; Prior, Lynda D.; Roig, Fidel Alejandro; Ross, Michael; Rossatto, Davi Rodrigo; Rossi, Vivien; Rowland, Lucy; Rutishauser, Ervan; Santana, Hellen; Schulze, Mark; Selhorst, Diogo; Silva, Williamar Rodrigues; Silveira, Marcos; Spannl, Susanne; Swaine, Michael D.; Toledo, José Julio; Toledo, Marcos Miranda; Toledo, Marisol; Toma, Takeshi; Tomazello Filho, Mario; Valdez Hernández, Juan Ignacio; Verbesselt, Jan; Vieira, Simone Aparecida; Vincent, Grégoire; Volkmer De Castilho, Carolina; Volland, Franziska; Worbes, Martin; Zanon, Magda Lea Bolzan; Aragão, Luiz E.O.C.

    2016-01-01

    The seasonal climate drivers of the carbon cycle in tropical forests remain poorly known, although these forests account for more carbon assimilation and storage than any other terrestrial ecosystem. Based on a unique combination of seasonal pan-tropical data sets from 89 experimental sites (68

  3. Water-table altitude of the unconfined aquifer, Wood River Valley aquifer system, south-central Idaho, October 2012.

    Data.gov (United States)

    Department of the Interior — Water levels in 93 wells completed in the Wood River Valley aquifer system were measured during October 22–24, 2012; these wells are part of a network established...

  4. Potentiometric-surface altitude of the confined aquifer, Wood River Valley aquifer system, south-central Idaho, October 2012.

    Data.gov (United States)

    Department of the Interior — Water levels in 93 wells completed in the Wood River Valley aquifer system were measured during October 22–24, 2012; these wells are part of a network established...

  5. MODFLOW-USG model of groundwater flow in the Wood River Valley aquifer system in Blaine County, Idaho

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A three-dimensional numerical groundwater flow model (MODFLOW-USG) was developed for the Wood River Valley (WRV) aquifer system, south-central Idaho, to evaluate...

  6. Financial cost-benefit analysis of investment possibilities in district heating system on wood residues

    Directory of Open Access Journals (Sweden)

    Stošić Ivan

    2017-01-01

    Full Text Available The purpose of this research is to provide feasibility analysis of a long-term sustainable development concept for district heating based on wood residues. In this paper, the experimental study has been conducted starting from the data collected by field researches in municipality of Trstenik (town in Serbia with district heating system currently based on heavy fuel oil and lignite. Using the method of Financial Cost-Benefit Analysis, this study evaluates financial efficiency of investment in district heating plant based on wood residues and energy savings in district heating system. Findings show that such investment could be profitable from the financial point of view: Net Present Value of investment is positive, Financial Rate of Return is high (30.69%, and the pay-back period is relatively favourable (7 years. Moreover, the presented SWOT indicates that there are realistic prospects of implementation of district heating based on wood residues. However, this does not mean everything will go smoothly and easily, keeping in mind a number of challenges that each new concept of district heating contains immanently. Nevertheless, the results of this research could provide useful inputs for the decision makers when selecting appropriate models for improving performance of municipal district heating systems.

  7. Studies on the removal of Pb(II) from wastewater by activated carbon developed from Tamarind wood activated with sulphuric acid.

    Science.gov (United States)

    Singh, C K; Sahu, J N; Mahalik, K K; Mohanty, C R; Mohan, B Raj; Meikap, B C

    2008-05-01

    The low-cost activated carbon were prepared from Tamarind wood material by chemical activation with sulphuric acid for the adsorption of Pb(II) from dilute aqueous solution. The activated carbon developed shows substantial capacity to adsorb Pb(II) from dilute aqueous solutions. The parameters studied include physical and chemical properties of adsorbent, pH, adsorbent dose, contact time and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order and pseudo-second order models. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of lead(II) was obtained 97.95% (experimental) and 134.22 mg/g (from Langmuir isotherm model) at initial concentration 40 mg/l, adsorbent dose 3g/l and pH 6.5. This high uptake showed Tamarind wood activated carbon as among the best adsorbents for Pb(II).

  8. Carbon isotope compositions (δ(13) C) of leaf, wood and holocellulose differ among genotypes of poplar and between previous land uses in a short-rotation biomass plantation.

    Science.gov (United States)

    Verlinden, M S; Fichot, R; Broeckx, L S; Vanholme, B; Boerjan, W; Ceulemans, R

    2015-01-01

    The efficiency of water use to produce biomass is a key trait in designing sustainable bioenergy-devoted systems. We characterized variations in the carbon isotope composition (δ(13) C) of leaves, current year wood and holocellulose (as proxies for water use efficiency, WUE) among six poplar genotypes in a short-rotation plantation. Values of δ(13) Cwood and δ(13) Cholocellulose were tightly and positively correlated, but the offset varied significantly among genotypes (0.79-1.01‰). Leaf phenology was strongly correlated with δ(13) C, and genotypes with a longer growing season showed a higher WUE. In contrast, traits related to growth and carbon uptake were poorly linked to δ(13) C. Trees growing on former pasture with higher N-availability displayed higher δ(13) C as compared with trees growing on former cropland. The positive relationships between δ(13) Cleaf and leaf N suggested that spatial variations in WUE over the plantation were mainly driven by an N-related effect on photosynthetic capacities. The very coherent genotype ranking obtained with δ(13) C in the different tree compartments has some practical outreach. Because WUE remains largely uncoupled from growth in poplar plantations, there is potential to identify genotypes with satisfactory growth and higher WUE. © 2014 John Wiley & Sons Ltd.

  9. Carbon-13 cross-polarization magic-angle-spinning nuclear magnetic resonance investigation of the interactions between maleic anhydride grafted polypropylene and wood polymers.

    Science.gov (United States)

    Rude, Erica; Laborie, Marie-Pierre G

    2008-05-01

    The chemical interactions between maleic anhydride grafted polypropylene (MAPP) and wood were studied with solid-state carbon-13 cross-polarization magic-angle-spinning nuclear magnetic resonance ((13)C CPMAS NMR) spectroscopy. MAPP was synthesized with 100% (13)C enrichment at the C(1) and C(4) carbons to allow detection of the [1,4-(13)C(2)]MAPP functional groups and was melt blended with cellulose, lignin, and maple wood. In the cellulose/MAPP blend, changes in (13)C CPMAS NMR corrected signal intensities for the anhydride and dicarboxylic maleic acid functionalities suggested that esterification may have occurred predominantly from the more numerous diacid carbons. A single proton longitudinal relaxation in the rotating frame, (H)T(1rho), for the MAPP and the cellulose carbons in the blend suggested that they were spin coupled, i.e., homogeneous on a 10-200 Angstrom scale. Esterification was also suggested in the lignin/MAPP blend. Furthermore, the more significant changes in the intensities of the carbonyl signals and (H)T(1rho) values suggested that lignin may be more reactive to MAPP than cellulose. Finally, when maple was melt blended with MAPP, the same trends in the (13)C CP-MAS NMR spectra and (H)T(1rho) behavior were observed as when MAPP was blended with cellulose or lignin. This study therefore clarifies that during melt compounding of wood with MAPP, esterification occurs with wood polymers, preferentially with lignin. Understanding the interactions of MAPP with wood is of significance for the development of natural-fiber-reinforced thermoplastic composites.

  10. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    Energy Technology Data Exchange (ETDEWEB)

    J. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2004-06-04

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this quarterly report, we present a preliminary comparison of the carbon sequestration potential of forests growing on 14 mined sites in a seven-state region in the Midwestern and Eastern Coalfields. Carbon contents of these forests were compared to adjacent forests on non-mined land. The study was installed as a 3 x 3 factorial in a random complete block design with three replications at each location. The treatments include three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots requires 4.5 acres, and the complete installation at each site requires 13.5 acres. The plots at all three locations have been installed and the plot corners marked with PVC stakes. GPS coordinates of each plot have been collected. Soil samples were collected from each plot to characterize the sites prior to treatment. Analysis of soil samples was completed and these data are being used to prepare fertilizer prescriptions. Fertilizer prescripts will be developed for each site. Fertilizer will be applied during the second quarter 2004. Data are included as appendices in this report. As part of our economic analysis of mined land reforestation, we focused on the implications of a shift in reforestation burden from the landowner to the mine operator. Results suggest that the reforestation of mined lands as part of the mining operation creates a viable and profitable forest enterprise for landowners with greater potential for carbon sequestration.

  11. Post-Earthquake Damage Inspection of Wood-Frame Buildings by a Polarimetric GB-SAR System

    OpenAIRE

    Hai Liu; Christian Koyama; Jinfeng Zhu; Qinghuo Liu; Motoyuki Sato

    2016-01-01

    Structural damage inspection after an earthquake is essential for safety assessment of the affected wood-frame buildings and for making knowledgeable decision regarding their repair, renovation, or replacement. We present a polarimetric radar system for sensing the concealed wood-frames damaged by earthquakes. This system employs an antenna array consisting of four linearly polarized Vivaldi antennas recording full-polarimetric radar echoes in an ultra-wideband ranging from 1 to 20 GHz. The d...

  12. Assessing carbon dynamics in natural and perturbed boreal aquatic systems

    Science.gov (United States)

    Ouellet, Alexandre; Lalonde, Karine; Plouhinec, Jean-Baptiste; Soumis, Nicolas; Lucotte, Marc; GéLinas, Yves

    2012-09-01

    Most natural freshwater lakes are net greenhouse gas (GHG) emitters. Compared to natural systems, human perturbations such as watershed wood harvesting and long-term reservoir impoundment lead to profound alterations of biogeochemical processes involved in the aquatic cycle of carbon (C). We exploited these anthropogenic alterations to describe the C dynamics in five lakes and two reservoirs from the boreal forest through the analysis of dissolved carbon dioxide (CO2), methane (CH4), oxygen (O2), and organic carbon (DOC), as well as total nitrogen and phosphorus. Dissolved and particulate organic matter, forest soil/litter and leachates, as well as dissolved inorganic carbon were analyzed for elemental and stable isotopic compositions (atomic C:N ratios, δ13Corg, δ13Cinorg and δ15Ntot). We found links between the export of terrestrial organic matter (OM) to these systems and the dissolved CO2 and O2 concentrations in the water column, as well as CO2 fluxes to the atmosphere. All systems were GHG emitters, with greater emissions measured for systems with larger inputs of terrestrial OM. The differences in CO2 concentrations and fluxes appear controlled by bacterial activity in the water column and the sediment. Although we clearly observed differences in the aquatic C cycle between natural and perturbed systems, more work on a larger number of water bodies and encompassing all four seasons should be undertaken to better understand the controls, rates, and spatial as well as temporal variability of GHG emissions, and to make quantitatively meaningful comparisons of GHG emissions (and other key variables) from natural and perturbed systems.

  13. Description of a straw/wood chip system at the power station of Southern Jutland

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, N.B. [The power station of Southern Jutland (Denmark)

    1997-10-01

    A project concerning combustion of straw and wood chips in separated boilers designed for parallel operation with large coal-fired boilers is described. The concept includes the construction of a new straw and wood chip-fired system at SH (power station of Southern Jutland) in the existing unit 2 of the Ensted Power Station (EV2). This boiler is designed for parallel operation with the coal-fired boiler in unit 3 of the Ensted Power Station (EV3). The current coal/oil-fired EV2 plant was laid up on 1 April 1995. The project will amount to DKK 400 million and is expected to take 37 months to complete. The project was launched on 15 December 1994. (ln)

  14. Hydrogeologic framework of the Wood River Valley aquifer system, south-central Idaho

    Science.gov (United States)

    Bartolino, James R.; Adkins, Candice B.

    2012-01-01

    The Wood River Valley contains most of the population of Blaine County and the cities of Sun Valley, Ketchum, Hailey, and Bellevue. This mountain valley is underlain by the alluvial Wood River Valley aquifer system, which consists primarily of a single unconfined aquifer that underlies the entire valley, an underlying confined aquifer that is present only in the southernmost valley, and the confining unit that separates them. The entire population of the area depends on groundwater for domestic supply, either from domestic or municipal-supply wells, and rapid population growth since the 1970s has caused concern about the long-term sustainability of the groundwater resource. As part of an ongoing U.S. Geological Survey effort to characterize the groundwater resources of the Wood River Valley, this report describes the hydrogeologic framework of the Wood River Valley aquifer system. Although most of the Wood River Valley aquifer system is composed of Quaternary-age sediments and basalts of the Wood River Valley and its tributaries, older igneous, sedimentary, or metamorphic rocks that underlie these Quaternary deposits also are used for water supply. It is unclear to what extent these rocks are hydraulically connected to the main part of Wood River Valley aquifer system and thus whether they constitute separate aquifers. Paleozoic sedimentary rocks in and near the study area that produce water to wells and springs are the Phi Kappa and Trail Creek Formations (Ordovician and Silurian), the Milligen Formation (Devonian), and the Sun Valley Group including the Wood River Formation (Pennsylvanian-Permian) and the Dollarhide Formation (Permian). These sedimentary rocks are intruded by granitic rocks of the Late Cretaceous Idaho batholith. Eocene Challis Volcanic Group rocks overlie all of the older rocks (except where removed by erosion). Miocene Idavada Volcanics are found in the southern part of the study area. Most of these rocks have been folded, faulted, and

  15. Intelligent Heat System - High-Energy Efficient Wood Stoves with Low Emissions. Emissions of Gases and Particles

    DEFF Research Database (Denmark)

    Illerup, Jytte Boll; Hansen, Brian Brun; Lin, Weigang

    2015-01-01

    A collaboration project between the CHEC research Centre, at DTU Chemical Engineering, and the stove manufacturing company HWAM A/S has been established during the last years and has led to development and marketing of wood stoves (Autopilot IHS) equipped with a digital control system. The improved...... performance has been verified by field tests in private homes. The main components of an Autopilot IHS wood stove are: a modern wood stove with three separate combustion air inlets, and a control system composing of measuring devices for vital process parameters and a system of controlling valves to regulate...... the individual air flows. The research wood stove set-up at DTU is instrumented with gas analyzers, local temperature measurements, and particle sampling equipment for measurement of particle concentration, size and composition. A detailed study has been conducted to map gaseous and PM emissions for various...

  16. Restoring Sustainable Forests on Appalachian Mined Lands for Wood Products, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

    Energy Technology Data Exchange (ETDEWEB)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2006-05-05

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this quarterly report we present data that show the spatial distribution of carbon in mine soils. Soil carbon data from deep soil pits from grassland minelands located in Ohio, Virginia, and West Virginia were analyzed to determine the vertical distribution and variability of soil organic carbon (SOC) down to a 2-m depth. Regression analyses were used to describe and model the distribution by soil depth of C(wt%), BD{sub fines}(g cm{sup -3}), and fines (vol%) in mine soils. The volume of excavated mine soil samples was transformed in terms of costs of digging and sampling, including sample collection and preparation, and C(wt%) analysis, in order to determine the maximum cost-effective depth (MCD) for carbon inventorying on the mined sites analyzed. Based on the horizontal variation of SOC(g m{sup -2}), we determined the sampling intensity required to achieve a desired accuracy of the amount of sequestered SOC(g m{sup -2}) at certain probability levels. The MCD and sampling intensity measurements were used to determine the minimum detectable difference (MDD) of SOC(g m{sup -2}) between two consecutive carbon inventories. We also proposed a method to determine the minimum number of years before a future C inventory event is carried out so that the measured SOC(g m{sup -2}) differences were greater than MDD. We used geostatistical analyses procedures to determine spatial dependence predictability of surface SOC(g m{sup -2}) data on the minelands analyzed. Kriging techniques were used to create surface SOC(g m{sup -2}) maps for the sites in Ohio and West Virginia. The average C sequestration rate in the surface soil layer for the Ohio (age 9) sites was estimated at 124 g C m{sup -2} yr{sup -1}, and it was

  17. A tree biomass and carbon estimation system

    Science.gov (United States)

    Emily B. Schultz; Thomas G. Matney; Donald L. Grebner

    2013-01-01

    Appropriate forest management decisions for the developing woody biofuel and carbon credit markets require inventory and growth-and-yield systems reporting component tree dry weight biomass estimates. We have developed an integrated growth-and-yield and biomass/carbon calculator. The objective was to provide Mississippi’s State inventory system with bioenergy economic...

  18. Interactive Effects of Climate Change and Decomposer Communities on the Stabilization of Wood-Derived Carbon Pools: Catalyst for a New Study

    Energy Technology Data Exchange (ETDEWEB)

    Resh, Sigrid C. [Michigan Technological Univ., Houghton, MI (United States)

    2014-11-17

    Globally, forest soils store ~two-thirds as much carbon (C) as the atmosphere. Although wood makes up the majority of forest biomass, the importance of wood contributions to soil C pools is unknown. Even with recent advances in the mechanistic understanding of soil processes, integrative studies tracing C input pathways and biological fluxes within and from soils are lacking. Therefore, our research objectives were to assess the impact of different fungal decay pathways (i.e., white-rot versus brown-rot)—in interaction with wood quality, soil temperature, wood location (i.e., soil surface and buried in mineral soil), and soil texture—on the transformation of woody material into soil CO2 efflux, dissolved organic carbon (DOC), and soil C pools. The use of 13C-depleted woody biomass harvested from the Rhinelander, WI free-air carbon dioxide enrichment (Aspen-FACE) experiment affords the unique opportunity to distinguish the wood-derived C from other soil C fluxes and pools. We established 168 treatment plots across six field sites (three sand and three loam textured soil). Treatment plots consisted of full-factorial design with the following treatments: 1. Wood chips from elevated CO2, elevated CO2 + O3, or ambient atmosphere AspenFACE treatments; 2. Inoculated with white rot (Bjerkandera adusta) or brown rot (Gloeophyllum sepiarium) pure fungal cultures, or the original suite of endemic microbial community on the logs; and 3. Buried (15cm in soil as a proxy for coarse roots) or surface applied wood chips. We also created a warming treatment using open-topped, passive warming chambers on a subset of the above treatments. Control plots with no added wood (“no chip control”) were incorporated into the research design. Soils were sampled for initial δ13C values, CN concentrations, and bulk density. A subset of plots were instrumented with lysimeters for sampling soil water and temperature data

  19. How to make a beetle out of wood: multi-elemental stoichiometry of wood decay, xylophagy and fungivory.

    Directory of Open Access Journals (Sweden)

    Michał Filipiak

    Full Text Available The majority of terrestrial biomass is wood, but the elemental composition of its potential consumers, xylophages, differs hugely from that of wood. This causes a severe nutritional imbalance. We studied the stoichiometric relationships of 11 elements (C, N, P, K, Ca, Mg, Fe, Zn, Mn, Cu, Na in three species of pine-xylem-feeding insects, Stictoleptura rubra, Arhopalus rusticus (Coleoptera, Cerambycidae and Chalcophora mariana (Coleoptera, Buprestidae, to elucidate their mechanisms of tissue growth and to match their life histories to their dietary constraints. These beetles do not differ from other Coleoptera in their absolute elemental compositions, which are approximately 1000 (N, 100 (P, Cu and 50 (K, Na times higher than in dead but undecayed pine wood. This discrepancy diminishes along the wood decay gradient, but the elemental concentrations remain higher by an order of magnitude in beetles than in highly decayed wood. Numerical simulation of the life history of S. rubra shows that feeding on nutrient-poor undecayed wood would extend its development time to implausible values, whereas feeding on highly decomposed wood (heavily infected with fungi would barely balance its nutritional budget during the long development period of this species. The changes in stoichiometry indicate that the relative change in the nutrient levels in decaying wood cannot be attributed solely to carbon loss resulting from decomposer respiration: the action of fungi substantially enriches the decaying wood with nutritional elements imported from the outside of the system, making it a suitable food for wood-eating invertebrates.

  20. International carbon accounting of harvested wood products: evaluation of two models for the quantification of wood product related emissions and removals

    NARCIS (Netherlands)

    Sikkema, R.; Schelhaas, M.J.; Nabuurs, G.J.

    2002-01-01

    At the moment three alternative approaches for estimating emissions and removals of CO2 from forest harvesting and wood products are under discussion. These are atmospheric flow approach, stock change approach, and the production approach. Several methodologies are being developed to deal with these

  1. Modelling and simulation of wood chip combustion in a hot air generator system.

    Science.gov (United States)

    Rajika, J K A T; Narayana, Mahinsasa

    2016-01-01

    This study focuses on modelling and simulation of horizontal moving bed/grate wood chip combustor. A standalone finite volume based 2-D steady state Euler-Euler Computational Fluid Dynamics (CFD) model was developed for packed bed combustion. Packed bed combustion of a medium scale biomass combustor, which was retrofitted from wood log to wood chip feeding for Tea drying in Sri Lanka, was evaluated by a CFD simulation study. The model was validated by the experimental results of an industrial biomass combustor for a hot air generation system in tea industry. Open-source CFD tool; OpenFOAM was used to generate CFD model source code for the packed bed combustion and simulated along with an available solver for free board region modelling in the CFD tool. Height of the packed bed is about 20 cm and biomass particles are assumed to be spherical shape with constant surface area to volume ratio. Temperature measurements of the combustor are well agreed with simulation results while gas phase compositions have discrepancies. Combustion efficiency of the validated hot air generator is around 52.2 %.

  2. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    Energy Technology Data Exchange (ETDEWEB)

    Jonathan Aggett

    2003-12-15

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this segment of work, our goal was to review methods for estimating tree survival, growth, yield and value of forests growing on surface mined land in the eastern coalfields of the USA, and to determine the extent to which carbon sequestration is influenced by these factors. Public Law 95-87, the Surface Mining Control and Reclamation Act of 1977 (SMCRA), mandates that mined land be reclaimed in a fashion that renders the land at least as productive after mining as it was before mining. In the central Appalachian region, where prime farmland and economic development opportunities for mined land are scarce, the most practical land use choices are hayland/pasture, wildlife habitat, or forest land. Since 1977, the majority of mined land has been reclaimed as hayland/pasture or wildlife habitat, which is less expensive to reclaim than forest land, since there are no tree planting costs. As a result, there are now hundreds of thousands of hectares of grasslands and scrublands in various stages of natural succession located throughout otherwise forested mountains in the U.S. A literature review was done to develop the basis for an economic feasibility study of a range of land-use conversion scenarios. Procedures were developed for both mixed hardwoods and white pine under a set of low product prices and under a set of high product prices. Economic feasibility is based on land expectation values. Further, our review shows that three types of incentive schemes might be important: (1) lump sum payment at planting (and equivalent series of annual payments); (2) revenue incentive at harvest; and (3) benefit based on carbon volume.

  3. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    Energy Technology Data Exchange (ETDEWEB)

    J. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2004-08-04

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in VA, WV, KY, OH, and PA mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots requires 4.5 acres, and the complete installation at each site requires 13.5 acres. The plots at all three locations have been installed and the plot corners marked with PVC stakes. GPS coordinates of each plot have been collected. Soil samples were collected from each plot to characterize the sites prior to treatment. Baseline soil carbon was determined for each of the eighty-one plots. Fertility analysis of soil samples was completed and these data were used to prepare fertilizer prescriptions and the pre-designated plots were fertilized. We also evaluated economic-based policy instruments that are designed to mitigate the reforestation burden borne by the owner of reclaimed mined land. Results suggest that although profitability of reforestation of these previously reclaimed mine lands may be achievable on better sites under lower interest rates, substantial payments would be required to reach &apos

  4. Determination of wood burning and fossil fuel contribution of black carbon at Delhi, India using aerosol light absorption technique.

    Science.gov (United States)

    Tiwari, S; Pipal, A S; Srivastava, A K; Bisht, D S; Pandithurai, G

    2015-02-01

    A comprehensive measurement program of effective black carbon (eBC), fine particle (PM2.5), and carbon monoxide (CO) was undertaken during 1 December 2011 to 31 March 2012 (winter period) in Delhi, India. The mean mass concentrations of eBC, PM2.5, and CO were recorded as 12.1 ± 8.7 μg/m(3), 182.75 ± 114.5 μg/m(3), and 3.41 ± 1.6 ppm, respectively, during the study period. Also, the absorption Angstrom exponent (AAE) was estimated from eBC and varied from 0.38 to 1.29 with a mean value of 1.09 ± 0.11. The frequency of occurrence of AAE was ~17 % less than unity whereas ~83 % greater than unity was observed during the winter period in Delhi. The mass concentrations of eBC were found to be higher by ~34 % of the average value of eBC (12.1 μg/m(3)) during the study period. Sources of eBC were estimated, and they were ~94 % from fossil fuel (eBCff) combustion whereas only 6 % was from wood burning (eBCwb). The ratio between eBCff and eBCwb was 15, which indicates a higher impact from fossil fuels compared to biomass burning. When comparing eBCff during day and night, a factor of three higher concentrations was observed in nighttime than daytime, and it is due to combustion of fossil fuel (diesel vehicle emission) and shallow boundary layer conditions. The contribution of eBCwb in eBC was higher between 1800 and 2100 hours due to burning of wood/biomass. A significant correlation between eBC and PM2.5 (r = 0.78) and eBC and CO (r = 0.46) indicates the similarity in location sources. The mass concentration of eBC was highest (23.4 μg/m(3)) during the month of December when the mean visibility (VIS) was lowest (1.31 km). Regression analysis among wind speed (WS), VIS, soot particles, and CO was studied, and significant negative relationships were seen between VIS and eBC (-0.65), eBCff (-0.66), eBCwb (-0.34), and CO (-0.65); however, between WS and eBC (-0.68), eBCff (-0.67), eBCwb (-0.28), and CO (-0.53). The regression analysis indicated

  5. Small scale wood combustion systems and fireplaces. Some existing markets in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Vankerkove, R. [ERBE, Agence Regionale Biomasse Energie, Gembloux (Belgium); Belle, J.F. van; Lemaire, P. [CRA, departement de genie rural, section biomasse, Gembloux (Belgium)

    1998-12-31

    Because they are seen as more economical and more environmental respectful, the national authorities intend usually to promote district heating rather than stoves and little boilers. Nevertheless these systems are yet now a very important source of energy for private houses in many European countries. The use of this kind of systems as primary or secondary tool of heating depends principally of the three following parameters: the percentage of area covered by the forest, the existing traditions concerning the use of wood stoves and the presence of local manufacturers or distributors. The aim of this presentation will be to show the situation and the states of the art in several European countries

  6. Restoring Sustainable Forests on Appalachian Mined Lands for Wood Products, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

    Energy Technology Data Exchange (ETDEWEB)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2005-12-01

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in Virginia, West Virginia, Kentucky, Ohio, and Pennsylvania mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, one each in Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots is 4.5 acres, and the complete installation at each site is 13.5 acres. Regression models of chemical and physical soil properties were created in order to estimate the SOC content down the soil profile. Soil organic carbon concentration and volumetric percent of the fines decreased exponentially down the soil profile. The results indicated that one-third of the total SOC content on mined lands was found in the surface 0-13 cm soil layer, and more than two-thirds of it was located in the 0-53 cm soil profile. A relative estimate of soil density may be best in broad-scale mine soil mapping since actual D{sub b} values are often inaccurate and difficult to obtain in rocky mine soils. Carbon sequestration potential is also a function of silvicultural practices used for reforestation success. Weed control plus tillage may be the optimum treatment for hardwoods and

  7. Catalytic graphitization of wood-based carbons with alumina by pulse current heating

    NARCIS (Netherlands)

    Hata, T.; Ishimaru, K.; Fujisawa, M.; Bronsveld, P; Vystavel, T.; De Hosson, J.; Kikuchi, H; Nishizawa, T.; Imamura, Y.

    2005-01-01

    Japanese cedar was preheated at 500 degrees C and subsequently mixed with 40 mu m Al2O3 particles. A pulse current heating method was used for a 5-min carbonization step under a pressure of 50MPa in order to promote the graphitization at temperatures between 2000 and 2200 degrees C. The samples were

  8. Development of forest carbon budget and wood production in the Czech Republic until 2060

    NARCIS (Netherlands)

    Cienciala, E.; Exnerová, Z.; Schelhaas, M.J.

    2008-01-01

    This study describes the scenarios of likely development of carbon pools in managed forest ecosystems of the Czech Republic. The analysis was based on a matrix scenario model (EFISCEN), adopting a novel parameterization based on forest stand site types and forest typology. The model was constrained

  9. Characterization of sp(2)- and sp(3)-bonded carbon in wood charcoal

    NARCIS (Netherlands)

    Ishimaru, Kengo; Hata, Toshimitsu; Bronsveld, Paul; Nishizawa, Takashi; Imamura, Yuji

    2007-01-01

    Japanese cedar (Cryptomeria japonica) preheated at 700 degrees C was subsequently heated to 1800 degrees C and characterized by electron microscopy, X-ray diffraction, and micro-Raman spectroscopy. The degree of disorder of carbon crystallites and the amount of amorphous phase decreased considerably

  10. A secular carbon debt from atmospheric high temperature combustion of stem wood?

    DEFF Research Database (Denmark)

    Czeskleba-Dupont, Rolf

    2012-01-01

    Basically, combustion of woody biomass in high temperature processes that react with atmospheric air results in a long lasting addition of carbon dioxide to the atmosphere. When harvesting large extra amounts of stem tree for energetic use, a global as well as secular time frame is needed to assess...

  11. Possibilities to switch from natural gas to wood fuel in DH system of Ukraine by the example of Slavutich project

    Energy Technology Data Exchange (ETDEWEB)

    Drozd, Konstantin; Geletukha, Georgiy [Scientific Engineering Centre Biomass, Kyiv (Ukraine)

    2006-07-15

    This paper is focusing on possibilities to switch from natural gas fuel to wood fuel in district heating system of Ukraine. As an example the case study of Slavutich project has been selected. In case study it was determined the capacity of new wood-fired boiler-house to be constructed. Also we estimated the wood fuel potential in the region and calculated the economical indexes of the proposed project. Taking into account the permanent natural gas prices increasing we performed the sensitivity analysis. The construction of 5 MW wood-fired boiler house is viable in current conditions (even when tariffs for heat are not yet increased nevertheless the natural gas price in Ukraine raised two times since beginning of 2006). And in the case of heat supply tariff increasing the economical indexes of the proposed project become very attractive.

  12. Wood construction under cold climate

    DEFF Research Database (Denmark)

    Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror

    2014-01-01

    As wood constructions increasingly use engineered wood products worldwide, concerns arise about the integrity of the wood and adhesives system. The glueline stability is a crucial issue for engineered wood application, especially under cold climate. In this study, Norway spruce (Picea abies...... specimens need to be tested in further work to more completely present the issue. The EN 301 and EN 302 may need to be specified based on wood species....

  13. Wood chip moisture on-line measurement system based on the combination of the different methods

    Energy Technology Data Exchange (ETDEWEB)

    Jaervinen, T. (VTT Technical Research Centre of Finland, Jyvaeskylae (Finland)); Teppola, P.; Siikanen, S. (VTT Technical Research Centreof Finland, Kuopio (Finland)); Malinen, J.; Hietala, E. (VTT Technical Research Centre of Finland, Oulu (Finland)); Tiitta, M.; Tomppo, L. (Univ. of Kuopio, Dept. of Physics (Finland)), email: markku.tiitta@uku.fi

    2009-07-01

    The aim of the project is to develop wood chip moisture on-line measurement system based on the combination of different methods based on use of nir-, impedance- and radiometric devices. All the measurements were installed in PDU-scale conveyor facility, which can be used for development and testing fuel and bulk material quality and property measurement technology and devices. The system enables to achieve accurate reference moisture content data within sufficient wide range of moisture content variation in full-scale. The usability and accuracy of the separate measurement methods were studied by testing in variable conditions. As a result, the best combination of different methods for each purpose is proposed. The actual system will be implemented in a separate new project under preparation. Good usability and wide range of applicability is prerequisite for the combination system to be used in variable ambient conditions for different types of wood chip like chips for pulping and logging residue chips and even to other biomass materials. (orig.)

  14. Wood flour

    Science.gov (United States)

    Craig M. Clemons

    2010-01-01

    The term “wood flour” is somewhat ambiguous. Reineke states that the term wood flour “is applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and texture.” Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...

  15. Wood flour

    Science.gov (United States)

    Craig M. Clemons; Daniel F. Caufield

    2005-01-01

    The term “wood flour” is somewhat ambiguous. Reineke states that the term wood flour “is applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and texture”. Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...

  16. Automated grading of wood-slabs. The development of a prototype system

    DEFF Research Database (Denmark)

    Ersbøll, Bjarne Kjær; Conradsen, Knut

    1992-01-01

    Danish plant for manufacture of parquet boards, the quality grading (visual quality) has always been done manually. As it is expected to be both expensive and difficult to recruit sufficient numbers of personnel to do this type of job in the future, it is of great interest to automate the function...... as much as possible. A vast range of types of defects has to be considered when the grading is done. This and the fact that wood is a 'natural' material means it is not easily described using ordinary vision systems. The proposed method assumes a 3-D feature space which depends on local texture...

  17. Assessing carbon footprints of dairy production systems

    Science.gov (United States)

    The farm-gate carbon footprint of milk quantifies the net greenhouse gas emissions of a dairy production system. Published values vary widely depending upon farm management practices and the calculation method used. Standard procedures for calculating the carbon footprint of milk are now established...

  18. Carbon Nanotubes – Interactions with Biological Systems

    OpenAIRE

    Reis, Joana; Capela-Silva, Fernando; Potes, José; Fonseca, Alexandra; Oliveira, Mónica; Kanagaraj, Subramani; Marques, António Torres

    2011-01-01

    his book chapter discusses the prospective biomedical applications of carbon nanotubes based materials, the impact of carbon nanotubes properties in the interaction with biological systems. Protein adsorption, impact on cell viability and cytokine production are explored. Potential respiratory and dermal toxicity are reviewed, as the difficulties on studying the biological response. In face of recent studies, special attention is drawn upon promising orthopaedic use.

  19. Fungal decay resistance of wood reacted with phosphorus pentoxide-amine system

    Science.gov (United States)

    Hong-Lin Lee; George C. Chen; Roger M. Rowell

    2004-01-01

    Resistance of wood reacted in situ with phosphorus pentoxide-amine to the brown-rot fungus Gloeophyllum trabeum and white-rot fungus Trametes versicolor was examined. Wood reacted with either octyl, tribromo, or nitro derivatives were more resistant to both fungi. Threshold retention values of phosphoramide-reacted wood to white-rot fungus T. versicolor ranged from 2.9...

  20. A brief review of machine vision in the context of automated wood identification systems

    Science.gov (United States)

    John C. Hermanson; Alex C. Wiedenhoeft

    2011-01-01

    The need for accurate and rapid field identification of wood to combat illegal logging around the world is outpacing the ability to train personnel to perform this task. Despite increased interest in non-anatomical (DNA, spectroscopic, chemical) methods for wood identification, anatomical characteristics are the least labile data that can be extracted from solid wood...

  1. Preparation and Characterization of Mn/N Co-Doped TiO2 Loaded on Wood-Based Activated Carbon Fiber and Its Visible Light Photodegradation

    Directory of Open Access Journals (Sweden)

    Xiaojun Ma

    2015-09-01

    Full Text Available Using MnSO4·H2O as manganese source and urea as nitrogen source, Mn/N co-doped TiO2 loaded on wood-based activated carbon fiber (Mn/Ti-N-WACF was prepared by sol–gel method. Mn/Ti-N-WACF with different Mn doping contents was characterized by scanning electron microscopy, X-ray diffraction (XRD and X-ray photoelectron spectroscopies (XPS, and ultraviolet-visible spectrophotometer. Results showed that the loading rate of TiO2 in Mn/Ti-N-WACF was improved by Mn/N co-doping. After calcination at 450 °C, the degree of crystallinity of TiO2 was reduced due to Mn/N co-doption in the resulting Mn/Ti-N-WACF samples, but the TiO2 crystal phase was not changed. XPS spectra revealed that some Ti4+ ions from the TiO2 lattice of Mn/Ti-N-WACF system were substituted by doped Mn. Moreover, new bonds formed within N–Ti–N and Ti–N–O because of the doped N that substituted some oxygen atoms in the TiO2 lattice. Notably, the degradation rate of methylene blue for Mn/Ti-N-WACF was improved because of the co-doped Mn/N under visible-light irradiation.

  2. Carbon Monoxide Silicate Reduction System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Carbon Monoxide Silicate Reduction System (COSRS) is a novel technology for producing large quantities of oxygen on the Moon. Oxygen yields of 15 kilograms per...

  3. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    Energy Technology Data Exchange (ETDEWEB)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2005-02-15

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. During the reporting period (October-December 2004) we completed the validation of a forest productivity classification model for mined land. A coefficient of determination (R{sup 2}) of 0.68 confirms the model's ability to predict SI based on a selection of mine soil properties. To determine carbon sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio (Figure 1), West Virginia (Figure 2), and Virginia (Figure 3). The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). For hybrid poplar, total plant biomass differences increased significantly with the intensity of silvicultural input. Root, stem, and foliage biomass also increased with the level of silvicultural intensity. Financial feasibility analyses of reforestation on mined lands previously reclaimed to grassland have been completed for conversion to white pine and mixed hardwood species. Examination of potential policy instruments for promoting financial feasibility also have been completed, including lump sum payments at time of conversion, annual payments through the life of the stand, and payments based on carbon sequestration that provide both minimal profitability and fully offset initial reforestation outlays. We have compiled a database containing mine permit information obtained from permitting agencies in Virginia, West Virginia, Pennsylvania, Ohio, and Kentucky. Due to differences and irregularities in permitting procedures

  4. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    Energy Technology Data Exchange (ETDEWEB)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2004-11-29

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in VA, WV, KY, OH, and PA mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots requires 4.5 acres, and the complete installation at each site requires 13.5 acres. The plots at all three locations have been installed and the plot corners marked with PVC stakes. GPS coordinates of each plot have been collected. Tree survival, height and diameter were measured after the first growing season. There were significant treatment and treatment x site interactions. A STELLA{reg_sign}-based model helped us develop insight as to whether it is possible to differentiate the permanent SOC from the C contained in the labile forms of SOM. The model can be used for predicting the amount of C sequestered on mine lands, and the amount of C that is expected to reside in the mine soil for more than 1,000 years. Based on our work, it appears that substantial carbon payments to landowners would be required to reach ''profitability'' under present circumstances. However, even though the

  5. Restoring Sustainable Forests on Appalachian Mined Lands for Wood Products, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

    Energy Technology Data Exchange (ETDEWEB)

    Burger, James A

    2005-07-20

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in Virginia, West Virginia, Kentucky, Ohio, and Pennsylvania mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, one each in Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots is 4.5 acres, and the complete installation at each site is 13.5 acres. During the reporting period we determined that by grinding the soil samples to a finer particle size of less than 250 μm (sieve No. 60), the effect of mine soil coal particle size on the extent to which these particles will be oxidized during the thermal treatment of the carbon partitioning procedure will be eliminated, thus making the procedure more accurate and precise. In the second phase of the carbon sequestration project, we focused our attention on determining the sample size required for carbon accounting on grassland mined fields in order to achieve a desired accuracy and precision of the final soil organic carbon (SOC) estimate. A mine land site quality classification scheme was developed and some field-testing of the methods of implementation was completed. The classification model

  6. Comparison of carbon sequestration potential in agricultural and afforestation farming systems

    Directory of Open Access Journals (Sweden)

    Chinsu Lin

    2013-04-01

    Full Text Available In the last few decades, many forests have been cut down to make room for cultivation and to increase food or energy crops production in developing countries. In this study, carbon sequestration and wood production were evaluated on afforested farms by integrating the Gaussian diameter distribution model and exponential diameter-height model derived from sample plots of an afforested hardwood forest in Taiwan. The quantity of sequestrated carbon was determined based on aboveground biomass. Through pilot tests run on an age-volume model, an estimation bias was obtained and used to correct predicted volume estimates for a farm forest over a 20-year period. An estimated carbon sequestration of 11,254 t C was observed for a 189ha-hardwood forest which is equivalent to 41,264 t CO2. If this amount of carbon dioxide were exchanged on the Chicago Climate Exchange (CCX market, the income earned would be 821 US$ ha- 1. Carbon sequestration from rice (Oryza sativa or sugarcane (Saccharum officinarum production is discharged as a result of straw decomposition in the soil which also improves soil quality. Sugarcane production does not contribute significantly to carbon sequestration, because almost all the cane fiber is used as fuel for sugar mills. As a result of changing the farming systems to hardwood forest in this study area, carbon sequestration and carbon storage have increased at the rate of 2.98 t C ha- 1 year- 1. Net present value of afforestation for a 20-year period of carbon or wood management is estimated at around US$ 30,000 given an annual base interest rate of 3 %.

  7. Concentrations of Carbon Monoxide and Nitrogen Oxides From a 25 kW Boiler Supplied Periodically and Continuously with Wood Pellets

    Directory of Open Access Journals (Sweden)

    Juszczak Marek

    2014-06-01

    Full Text Available The impact of the fuel feeding mode (continuous or periodic with different stand-by/operation time ratios on carbon monoxide (CO and nitrogen oxides (NO, NOx concentration values in the flue gas was analysed for coniferous wood pellet firing. Experiments were performed in a 25 kW water boiler equipped with an over-fed wood pellet furnace located in a full scale heat station simulating real-life conditions. Influence of oxygen concentration and temperature in the combustion chamber on carbon monoxide and nitrogen oxide concentrations was presented in diagrams. Dust and hydrocarbon concentrations were also monitored. It was concluded that the commonly used periodic fuel supply does not necessarily cause a significant increase of carbon monoxide concentration, as compared to the continuous fuel feeding mode. Continuous fuel supply can even induce higher carbon monoxide concentrations when fuel mass stream is not chosen properly. Each time new fuel type is used in a specific furnace, one should perform experiments to determine the adequate settings (stand-by/operation time ratio, fuel mass streams, air stream to obtain the optimal, lowest possible emission for a certain boiler heat output

  8. Trees enhance soil carbon sequestration and nutrient cycling in a silvopastoral system in south-western Nicaragua

    OpenAIRE

    Hoosbeek, Marcel R.; Remme, Roy P.; Rusch, Graciela

    2016-01-01

    Tree occurrence in silvopastoral systems of Central America has been under pressure for various reasons including attempts to improve grassland productivity and the need for wood. However, scattered isolated trees are also recognized to provide ecosystem services like shade, fodder and fruits that are important to cattle in the dry season. In addition, trees may enhance the climate change mitigation potential of silvopastoral systems through increased carbon (C) upt...

  9. Trees enhance soil carbon sequestration and nutrient cycling in a silvopastoral system in south-western Nicaragua

    OpenAIRE

    Hoosbeek, Marcel R.; Remme, Roy P.; Graciela M Rusch

    2016-01-01

    Tree occurrence in silvopastoral systems of Central America has been under pressure for various reasons including attempts to improve grassland productivity and the need for wood. However, scattered isolated trees are also recognized to provide ecosystem services like shade, fodder and fruits that are important to cattle in the dry season. In addition, trees may enhance the climate change mitigation potential of silvopastoral systems through increased carbon (C) uptake and subsequent soil car...

  10. Soil carbon stabilization and turnover at alley-cropping systems, Eastern Germany

    Science.gov (United States)

    Medinski, T.; Freese, D.

    2012-04-01

    Alley-cropping system is seen as a viable land-use practice for mitigation of greenhouse gas CO2, energy-wood production and soil carbon sequestration. The extent to which carbon is stored in soil varies between ecosystems, and depends on tree species, soil types and on the extent of physical protection of carbon within soil aggregates. This study investigates soil carbon sequestration at alley-cropping systems presented by alleys of fast growing tree species (black locust and poplar) and maize, in Brandenburg, Eastern Germany. Carbon accumulation and turnover are assessed by measuring carbon fractions differing in decomposition rates. For this purpose soil samples were fractionated into labile and recalcitrant soil-size fractions by wet-sieving: macro (>250 µm), micro (53-250 µm) and clay + silt (LiCor automated device LI-8100A. No differences for the total and stable (clay+silt, <53 µm) carbon fraction were observed between treatment. While cold water-extractable carbon was significantly higher at maize alley compared to black locust alley. This may indicate faster turnover of organic matter at maize alley due to tillage, which influenced greater incorporation of plant residues into the soil, greater soil respiration and microbial activity.

  11. Soil carbon pools in different pasture systems

    Directory of Open Access Journals (Sweden)

    Francisco M. Cardozo, Jr.

    2016-03-01

    Full Text Available The aim of this study was to assess the carbon pools of a tropical soil where the native forest was replaced with different pasture systems. We studied five pasture production systems, including four monoculture systems with forage grasses such as Andropogon, Brachiaria, Panicum, and Cynodon, and an agroforestry system as well as a native vegetation plot. Greater availability of fulvic acid was detected in the agroforestry system as compared with that in the other systems. Higher lability of C was detected in the Andropogon system during the dry and rainy seasons and during the dry season in Cynodon. During the dry season, all pastures systems showed deficits in the net removal of atmospheric CO2. The structure and practices of the agroforestry system enables more carbon to be sequestered in the soil as compared with the monoculture pasture, suggesting that it is an important practice to mitigate climatic change and to improve soil quality.

  12. Carbon nanotube heat-exchange systems

    Science.gov (United States)

    Hendricks, Terry Joseph; Heben, Michael J.

    2008-11-11

    A carbon nanotube heat-exchange system (10) and method for producing the same. One embodiment of the carbon nanotube heat-exchange system (10) comprises a microchannel structure (24) having an inlet end (30) and an outlet end (32), the inlet end (30) providing a cooling fluid into the microchannel structure (24) and the outlet end (32) discharging the cooling fluid from the microchannel structure (24). At least one flow path (28) is defined in the microchannel structure (24), fluidically connecting the inlet end (30) to the outlet end (32) of the microchannel structure (24). A carbon nanotube structure (26) is provided in thermal contact with the microchannel structure (24), the carbon nanotube structure (26) receiving heat from the cooling fluid in the microchannel structure (24) and dissipating the heat into an external medium (19).

  13. N-fertilization has different effects on the growth, carbon and nitrogen physiology, and wood properties of slow- and fast-growing Populus species.

    Science.gov (United States)

    Li, Hong; Li, Mengchun; Luo, Jie; Cao, Xu; Qu, Long; Gai, Ying; Jiang, Xiangning; Liu, Tongxian; Bai, Hua; Janz, Dennis; Polle, Andrea; Peng, Changhui; Luo, Zhi-Bin

    2012-10-01

    To investigate how N-fertilization affects the growth, carbon and nitrogen (N) physiology, and wood properties of poplars with contrasting growth characteristics, slow-growing (Populus popularis, Pp) and fast-growing (P. alba×P. glandulosa, Pg) poplar saplings were exposed to different N levels. Above-ground biomass, leaf area, photosynthetic rates (A), instantaneous photosynthetic nitrogen use efficiency (PNUE (i)), chlorophyll and foliar sugar concentrations were higher in Pg than in Pp. Foliar nitrate reductase (NR) activities and root glutamate synthase (GOGAT) activities were higher in Pg than in Pp as were the N amount and NUE of new shoots. Lignin contents and calorific values of Pg wood were less than that of Pp wood. N-fertilization reduced root biomass of Pg more than of Pp, but increased leaf biomass, leaf area, A, and PNUE(i) of Pg more than of Pp. Among 13 genes involved in the transport of ammonium or nitrate or in N assimilation, transcripts showed more pronounced changes to N-fertilization in Pg than in Pp. Increases in NR activities and N contents due to N-fertilization were larger in Pg than in Pp. In both species, N-fertilization resulted in lower calorific values as well as shorter and wider vessel elements/fibres. These results suggest that growth, carbon and N physiology, and wood properties are more sensitive to increasing N availability in fast-growing poplars than in slow-growing ones, which is probably due to prioritized resource allocation to the leaves and accelerated N physiological processes in fast-growing poplars under higher N levels.

  14. New methods for testing fire resistance of wood façade systems

    Directory of Open Access Journals (Sweden)

    Mårtensson August

    2016-01-01

    Full Text Available Arson in schools has been a huge problem in Sweden over the last fifteen years. The average amount of school arsons between 2000 and 2014 was 285 cases each year which corresponds to 50% of the total amount of reported fires in school buildings. This is a well-known problem and a lot of research has been done in this area. Investigations has been done about fire and heat detection systems, different technical factors significance in fire scenarios and how to prevent adolescents from starting fires. Another part of the problem that partly been investigated is how the schools are constructed. Roughly 50% of the arsons are outside of the school building. In Sweden one and two storey buildings are allowed to be built with wooden façades in accordance with the building code, which is one of the reasons many schools are built with wooden façade systems. The most critical part in a wood façade system from a fire safety perspective is concluded to be the eaves because of how they usually are built to let air pass through. Even though a wood façade isn't as well resistant to fire compared to a concrete façade, three versions of new test methods for combustible façades have been developed to make it possible to make sure in advance that a construction is resistant enough. The new test methods are focused on specific details and parts of a façade system to provide a more informative and useful result compared to SP Fire 105. Observations and measurements of flame spread and temperature changes in the eave, over the window joints and in the air gap are made. With these parameters in consideration criteria's has been chosen for a critical temperature of 280 ∘C at a critical time of 20 minutes.

  15. Restoring Sustainable Forests on Appalachian Mined Lands for Wood Product, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

    Energy Technology Data Exchange (ETDEWEB)

    Burger, James A

    2006-09-30

    Concentrations of CO{sub 2} in the Earth’s atmosphere have increased dramatically in the past 100 years due to deforestation, land use change, and fossil fuel combustion. These humancaused, higher levels of CO{sub 2} may enhance the atmospheric greenhouse effect and may contribute to climate change. Many reclaimed coal-surface mine areas in the eastern U.S. are not in productive use. Reforestation of these lands could provide societal benefits, including sequestration of atmospheric carbon. The goal of this project was to determine the biological and economic feasibility of restoring high-quality forests on the tens of thousands of hectares of mined land and to measure carbon sequestration and wood production benefits that would be achieved from large-scale application of forest restoration procedures. We developed a mine soil quality model that can be used to estimate the suitability of selected mined sites for carbon sequestration projects. Across the mine soil quality gradient, we tested survival and growth performance of three species assemblages under three levels of silvicultural. Hardwood species survived well in WV and VA, and survived better than the other species used in OH, while white pine had the poorest survival of all species at all sites. Survival was particularly good for the site-specific hardwoods planted at each site. Weed control plus tillage may be the optimum treatment for hardwoods and white pine, as any increased growth resulting from fertilization may not offset the decreased survival that accompanied fertilization. Grassland to forest conversion costs may be a major contributor to the lack of reforestation of previously reclaimed mine lands in the Appalachian coal-mining region. Otherwise profitable forestry opportunities may be precluded by these conversion costs, which for many combinations of factors (site class, forest type, timber prices, regeneration intensity, and interest rate) result in negative land expectation values

  16. Advanced Thermal Protection Systems (ATPS), Aerospace Grade Carbon Bonded Carbon Fiber Material Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Carbon bonded carbon fiber (CBCF) insulating material is the basis for several highly successful NASA developed thermal protection systems (TPS). Included among...

  17. Advanced Thermal Protection Systems (ATPS), Aerospace Grade Carbon Bonded Carbon Fiber Material Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Carbon bonded carbon fiber (CBCF) insulating material is the basis for several highly successful NASA developed thermal protection systems (TPS). Among the...

  18. Portable in-woods pyrolysis: Using forest biomass to reduce forest fuels, increase soil productivity, and sequester carbon

    Science.gov (United States)

    Deborah Page-Dumroese; Mark Coleman; Greg Jones; Tyron Venn; R. Kasten Dumroese; Nathanial Anderson; Woodam Chung; Dan Loeffler; Jim Archuleta; Mark Kimsey; Phil Badger; Terry Shaw; Kristin McElligott

    2009-01-01

    We describe the use of an in-woods portable pyrolysis unit that converts forest biomass to bio-oil and the application of the byproduct bio-char in a field trial. We also discuss how in-woods processing may reduce the need for long haul distances of lowvalue woody biomass and eliminate open, currently wasteful burning of forest biomass. If transportation costs can be...

  19. Groundwater-flow model for the Wood River Valley aquifer system, south-central Idaho

    Science.gov (United States)

    Fisher, Jason C.; Bartolino, James R.; Wylie, Allan H.; Sukow, Jennifer; McVay, Michael

    2016-06-27

    A three-dimensional numerical model of groundwater flow was developed for the Wood River Valley (WRV) aquifer system, Idaho, to evaluate groundwater and surface-water availability at the regional scale. This mountain valley is located in Blaine County and has a drainage area of about 2,300 square kilometers (888 square miles). The model described in this report can serve as a tool for water-rights administration and water-resource management and planning. The model was completed with support from the Idaho Department of Water Resources, and is part of an ongoing U.S. Geological Survey effort to characterize the groundwater resources of the WRV. A highly reproducible approach was taken for constructing the WRV groundwater-flow model. The collection of datasets, source code, and processing instructions used to construct and analyze the model was distributed as an R statistical-computing and graphics package.

  20. Carbon Dioxide In Fog Form To Refrigerate The Cut Tool During Wood Machining [dióxido De Carbono Em Forma De Névoa Na Refrigeração Da Ferramenta De Corte, Durante A Usinagem Da Madeira

    OpenAIRE

    Gozeloto M.; Goncalves R.

    2009-01-01

    Heat concentration from wood cutting process promotes the tool premature wear, with consequent effect on the surface processed material, causing burnt areas as well as provoking larger superficial roughness than observed in machining process with absence of accumulated heat. The objective of this research was to evaluate the effect of cutting tool refrigeration during wood machining. The adopted mechanism was the use of pressurized carbon dioxide in fog form applied directly in the cutting ar...

  1. Case study : performance of a house built on a treated wood foundation system in a cold climate

    Science.gov (United States)

    Charles G. Carll; Charles R. Boardman; Collin L. Olson

    2010-01-01

    Performance attributes of a home, constructed in 2001 in Madison, WI, on a treated-wood foundation system were investigated over a multiyear period. Temperature conditions in the basement of the building were, without exception, comfortable, even though the basement was not provided with supply registers for heating or cooling. Basement humidity conditions were...

  2. The impact of wood biochar as a soil amendment in aerobic rice systems of the Brazilian Savannah

    NARCIS (Netherlands)

    Carvalho, M.T.M.

    2015-01-01

    Abstract Keywords: tropical Savannah, biochar, soil fertility, aerobic rice, grain yield, N2O emission Márcia Thaís de Melo Carvalho (2015). The impact of wood biochar as a soil amendment in aerobic rice systems of the Brazilian Savannah. PhD thesis, Wageningen

  3. PCS: a pallet costing system for wood pallet manufacturers (version 1.0 for Windows®)

    Science.gov (United States)

    A. Jefferson, Jr. Palmer; Cynthia D. West; Bruce G. Hansen; Marshall S. White; Hal L. Mitchell

    2002-01-01

    The Pallet Costing System (PCS) is a computer-based, Microsoft Windows® application that computes the total and per-unit cost of manufacturing an order of wood pallets. Information about the manufacturing facility, along with the pallet-order requirements provided by the customer, is used in determining production cost. The major cost factors addressed by PCS...

  4. Demonstration of Sustainable Domestic and Tertiary Heating Systems using Agro/Forest/Wood Residues - Domoheat

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Miguel, M. Salve (ESCAN, S.A, Avda. Ferrol, 14, B-328029 Madrid (Spain)). e-mail: escan@escansa.com (and others)

    2008-10-15

    Potential of forest fuels in European Union reaches 40 million m3/year, the hectares of olive and vineyards are close to 4,7 million and 3,5 million respectively. Considering biomass residues have different characteristics, it exists high diversity of locally available raw-materials, as well as the possibility for raw material mixes, it is necessary to demonstrate the behaviour of new technologies with new raw materials and mixes, in order to facilitate their introduction in domestic and tertiary market. For the Demonstration and Investigation the Project DOMOHEAT was started, supported by the European Commission as a STREP Project. The project focuses on the demonstration of three innovative and sustainable medium size (60 - 100 kW) heating systems, (one for each country: Spain) for domestic and tertiary buildings, using lower quality wastes from agro/forest/wood production. Almond shell, pine cone, Olive pruning, chips from forest exploitation of Pines and Eucalyptus, pellets from sawdust and bark of Pine, will be the biomass raw materials (see fig. 1). The main objective of the project is to demonstrate the overall chains of three heating systems (one for each country), able to diversify the raw material (energy supply), reduce agro/forest/wood production problems and promoting the use of renewable thermal energy in European countries. Each heating system is based on a sustainable and integrated approach (fuel logistics and pre-treatment, energy production, maintenance rules, Normative). Raw material is a mix of fuels, which allow using the most economical fuel of the market, in addition it improves the availability, security of supply, and opportunities for demonstrate that heating from biomass is possible. Each combustion system designed (see fig. 2) is focused on technology tailored to special characteristics of biomass mix, in order to obtain better efficiency and minimum emissions: automatic cleaning system of the tubes for heat interchange, automatic

  5. UPEI (University of Prince Edward Island) wood chip boiler to feed second Charlottetown area district heating system

    Energy Technology Data Exchange (ETDEWEB)

    1987-09-01

    A new $4.3 million district heating system will deliver heat to 31 subscribers from UPEI's wood-fired heating plant. The plan is to convert UPEI's own campus-wide heat distribution system from steam to more efficient hot water. The total plant output is 13.7 MW, enough to heat the campus and the 31 subcribers' buildings. During the 1987-88 fiscal year, the more northern part of the system will be completed. A year later the system will be extended south. When finished, the project will displace nearly 2 million l of fuel oil annually with just over 7000 green tonnes of wood chips. Hot water from the UPEI boiler plant travels along each route though buried insulated pipes. At the end of a run, the water reverses direction and returns to the boiler in another insulated pipe. It passes through small cylindrical heat exchangers in each building. Boiler and burner maintenance costs are eliminated. Once the user is familiar with the system, the old boiler and hot water tanks can be removed - making space available for other purposes. District heating is virtually noiseless. Insurance costs go down in many cases when boilers and combustion systems are no longer used. The Island's currently underutilized wood resource will be put to better use. These woodchips are made from wood that has been damaged by budworm and other diseases, or wood that is overmature. The project has sound environmental benefits ranging from reduced sulpher emissions to the possible long-term benefit of eliminating a number of underground fuel storage tanks and their potential for leaks.

  6. The identification of wood species with the aid of the Hollerith system

    NARCIS (Netherlands)

    Varossieau, W.W.

    1947-01-01

    The International Association of Wood Anatomists in the early years of its existence has undertaken to standardize the nomenclature used in describing woods. Later the classes of dimensions have been added thereinto. In the same way it should be possible now to standardize one or two identification

  7. Wood waste minimization in the timber sector of Ghana: a systems approach to reduce environmental impact.

    NARCIS (Netherlands)

    Eshun, J.F.; Potting, J.; Leemans, R.

    2012-01-01

    This paper explores the potential of minimizing wood waste to reduce the environmental impact in the timber sector i.e. forestry and timber industry subsystem of Ghana. This study is a follow up of 3 earlier studies on the timber sector. These studies consistently identified minimizing wood waste as

  8. Adsorption Removal of Glycidyl Esters from Palm Oil and Oil Model Solution by Using Acid-Washed Oil Palm Wood-Based Activated Carbon: Kinetic and Mechanism Study.

    Science.gov (United States)

    Cheng, Weiwei; Liu, Guoqin; Wang, Xuede; Han, Lipeng

    2017-11-08

    Acid-washed oil palm wood-based activated carbon (OPAC) has been investigated for its potential application as a promising adsorbent in the removal of glycidyl esters (GEs) from both palm oil and oil model (hexadecane) solution. It was observed that the removal rate of GEs in palm oil was up to >95%, which was significantly higher than other adsorbents used in this study. In batch adsorption system, the adsorption efficiency and performance of acid-washed OPAC were evaluated as a function of several experimental parameters such as contact time, initial glycidyl palmitate (PGE) concentration, adsorbent dose, and temperature. The Langmuir, Freundlich, and Dubinin-Radushkevich models were used to describe the adsorption equilibrium isotherm, and the equilibrium data were fitted best by the Langmuir model. The maximum adsorption capacity of acid-washed OPAC was found to be 36.23 mg/g by using the Langmuir model. The thermodynamic analysis indicated that the adsorption of PGE on acid-washed OPAC was an endothermic and physical process in nature. The experimental data were fitted by using pseudo-first-order, pseudo-second-order, and intraparticle diffusion models. It was found that the kinetic of PGE adsorption onto acid-washed OPAC followed well the pseudo-second-order model for various initial PGE concentrations and the adsorption process was controlled by both film diffusion and intraparticle diffusion. The desorption test indicated the removal of GEs from palm oil was attributed to not only the adsorption of GEs on acid-washed OPAC, but also the degradation of GEs adsorbed at activated sites with acidic character. Furthermore, no significant difference between before and after PGE adsorption in oil quality was observed.

  9. From models to measurements: comparing downed dead wood carbon stock estimates in the U.S. forest inventory.

    Directory of Open Access Journals (Sweden)

    Grant M Domke

    Full Text Available The inventory and monitoring of coarse woody debris (CWD carbon (C stocks is an essential component of any comprehensive National Greenhouse Gas Inventory (NGHGI. Due to the expense and difficulty associated with conducting field inventories of CWD pools, CWD C stocks are often modeled as a function of more commonly measured stand attributes such as live tree C density. In order to assess potential benefits of adopting a field-based inventory of CWD C stocks in lieu of the current model-based approach, a national inventory of downed dead wood C across the U.S. was compared to estimates calculated from models associated with the U.S.'s NGHGI and used in the USDA Forest Service, Forest Inventory and Analysis program. The model-based population estimate of C stocks for CWD (i.e., pieces and slash piles in the conterminous U.S. was 9 percent (145.1 Tg greater than the field-based estimate. The relatively small absolute difference was driven by contrasting results for each CWD component. The model-based population estimate of C stocks from CWD pieces was 17 percent (230.3 Tg greater than the field-based estimate, while the model-based estimate of C stocks from CWD slash piles was 27 percent (85.2 Tg smaller than the field-based estimate. In general, models overestimated the C density per-unit-area from slash piles early in stand development and underestimated the C density from CWD pieces in young stands. This resulted in significant differences in CWD C stocks by region and ownership. The disparity in estimates across spatial scales illustrates the complexity in estimating CWD C in a NGHGI. Based on the results of this study, it is suggested that the U.S. adopt field-based estimates of CWD C stocks as a component of its NGHGI to both reduce the uncertainty within the inventory and improve the sensitivity to potential management and climate change events.

  10. From models to measurements: comparing downed dead wood carbon stock estimates in the U.S. forest inventory.

    Science.gov (United States)

    Domke, Grant M; Woodall, Christopher W; Walters, Brian F; Smith, James E

    2013-01-01

    The inventory and monitoring of coarse woody debris (CWD) carbon (C) stocks is an essential component of any comprehensive National Greenhouse Gas Inventory (NGHGI). Due to the expense and difficulty associated with conducting field inventories of CWD pools, CWD C stocks are often modeled as a function of more commonly measured stand attributes such as live tree C density. In order to assess potential benefits of adopting a field-based inventory of CWD C stocks in lieu of the current model-based approach, a national inventory of downed dead wood C across the U.S. was compared to estimates calculated from models associated with the U.S.'s NGHGI and used in the USDA Forest Service, Forest Inventory and Analysis program. The model-based population estimate of C stocks for CWD (i.e., pieces and slash piles) in the conterminous U.S. was 9 percent (145.1 Tg) greater than the field-based estimate. The relatively small absolute difference was driven by contrasting results for each CWD component. The model-based population estimate of C stocks from CWD pieces was 17 percent (230.3 Tg) greater than the field-based estimate, while the model-based estimate of C stocks from CWD slash piles was 27 percent (85.2 Tg) smaller than the field-based estimate. In general, models overestimated the C density per-unit-area from slash piles early in stand development and underestimated the C density from CWD pieces in young stands. This resulted in significant differences in CWD C stocks by region and ownership. The disparity in estimates across spatial scales illustrates the complexity in estimating CWD C in a NGHGI. Based on the results of this study, it is suggested that the U.S. adopt field-based estimates of CWD C stocks as a component of its NGHGI to both reduce the uncertainty within the inventory and improve the sensitivity to potential management and climate change events.

  11. WOOD WELDING

    OpenAIRE

    Marcos Theodoro Muller; Rafael Rodolfo de Melo; Diego Martins Stangerlin

    2010-01-01

    The term "wood welding" designates what can be defined as "welding of wood surfaces". This new process, that it provides the joint of wood pieces without the use of adhesives or any other additional material, provokes growing interest in the academic environment, although it is still in laboratorial state. Linear friction welding induced bymechanical vibration yields welded joints of flat wood surfaces. The phenomenon of the welding occurs in less time than 10 seconds, with the temperature in...

  12. Guide for construction of wood power systems. Construction - economic efficiency - technology; Leitfaden fuer die Errichtung von Holzenergie-Anlagen. Umsetzung - Wirtschaftlichkeit - Technologie

    Energy Technology Data Exchange (ETDEWEB)

    Ruchser, M. [Forum fuer Zukunftsenergien e.V., Bonn (Germany)

    2001-07-01

    The Guidebook serves as a handbook for the entire operational sequence, which is necessary for the establishment of a wood combustion plant in Germany with an installed capacity larger than 100 kW{sub th}, for the use of fuel woods such as forest chips, wood and forest residues, pellets, wood waste, etc. within the limits of the laws and regulations prescribed for the respective performance classes. The Guidebook's purpose is to give potential investors and operators of wood combustion plants as well as the appropriate authorities a quick and global overview of the energetic use of wood in order to contribute to an increased application of this technology. The Guidebook introduces a Quality Model in Chapters 2 and 3, which describes the establishment of a wood combustion system in six phases. Eleven Management Aspects are differentiated, which can be helpful during the conversion of a project. Thus, potential investors and operators of wood combustion plants become acquainted with the most important aspects of this kind of project conversion. In addition, Chapter 4 provides an overview of the operating costs of wood combustion plants. The relevant licensing and planning procedures depending on the installed capacity and fuelwood use are comprehensively described in Chapter 5. Chapter 6 supplies a concrete overview of the environmental aspects and emissions of wood combustion. Since wood combustion plants must be - as all other investments - financially secured Chapter 7 provides a description of the relevant information on public means and subsidies. Besides all important promotion programmes, the new German Renewable Energy Law (Erneuerbare-Energien-Gesetz - EEG) of April 2000 is described in detail. Many examples of already realised wood combustion plant projects are described in Chapter 8. As an additional service, all significant addresses from ministries to energy agencies and associations are listed in Chapter 9. (orig.)

  13. integrated vertical photobioreactor system for carbon dioxide

    African Journals Online (AJOL)

    Astri Nugroho

    2013-07-02

    Jul 2, 2013 ... Abstract. A vertical photobioreactor containing the microalgae Scenedesmus obliquus is a highly efficient system for converting carbon dioxide (CO2) into biomass. The use of photobioreactor for CO2 mitigation has been explored using microalgae as photosynthetic microorganism. The growth rate (μ, h-1) ...

  14. Integrated Vertical Photobioreactor System for Carbon Dioxide ...

    African Journals Online (AJOL)

    A vertical photobioreactor containing the microalgae Scenedesmus obliquus is a highly efficient system for converting carbon dioxide (CO2) into biomass. The use of photobioreactor for CO2 mitigation has been explored using microalgae as photosynthetic microorganism. The growth rate (m, h-1) were 0.03; 0.13; 0.20; 0.09 ...

  15. Carbon Isotopes in an Earth System Model

    Science.gov (United States)

    Cuntz, M.; Reick, C. H.; Maier-Reimer, E.; Heimann, M.; Scholze, M.; Naegler, T.

    2009-04-01

    We present first calculations of the carbon isotopic composition of carbon dioxide in the Earth System Model (ESM) COSMOS. Earth System models consist of coupled models of the ocean, the atmosphere, the land surface, the biosphere (marine and terrestrial, plants and soils), and the cryosphere (snow and ice). In COSMOS from the Max Planck Institute for Meteorology, Hamburg, Germany, these components are the model of the atmospheric circulation ECHAM, the physical ocean model MPI-OM, the land surface parameterisation JSBACH and the oceanic carbon cycle model HAMOCC. The ESM COSMOS therefore calculates its own climate and CO2 concentrations during the diel course with a few degrees resolution, driven only by solar activity and human perturbations. The new model version now computes the multiple fractionation processes occurring during uptake of CO2 from the atmosphere by the terrestrial and marine biosphere. The model then redistributes the isotopic compositions in the land and ocean biospheres, including respiration, phenology, fire, land-use change and carbon export. This means that it includes a full isotopic carbon cycle, in the atmosphere, the ocean and on land. The model calculates not only the stable carbon isotope signatures but also radiocarbon activities in the Earth System. It will include in future the radiocarbon perturbation due to nuclear bomb tests. We compare first results of the ESM with other global estimates of terrestrial discrimination. We also compare predicted zonal and seasonal variations of isotope ratios in atmospheric CO2 with measurements from the GLOBALVIEW flask network. The stable and radioactive carbon isotopes are excellent tests for the overall model performance but also for individual model components. For example radiocarbon will be used to test stratosphere-troposphere exchange, ocean circulation and air-sea gas exchange. The isotope-enabled model can be used in future for example to predict carbon isotope ratios of terrestrial

  16. Chemical characterization and stable carbon isotopic composition of particulate Polycyclic Aromatic Hydrocarbons issued from combustion of 10 Mediterranean woods

    Directory of Open Access Journals (Sweden)

    A. Guillon

    2013-03-01

    Full Text Available The objectives of this study were to characterize polycyclic aromatic hydrocarbons from particulate matter emitted during wood combustion and to determine, for the first time, the isotopic signature of PAHs from nine wood species and Moroccan coal from the Mediterranean Basin. In order to differentiate sources of particulate-PAHs, molecular and isotopic measurements of PAHs were performed on the set of wood samples for a large panel of compounds. Molecular profiles and diagnostic ratios were measured by gas chromatography/mass spectrometry (GC/MS and molecular isotopic compositions (δ13C of particulate-PAHs were determined by gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS. Wood species present similar molecular profiles with benz(aanthracene and chrysene as dominant PAHs, whereas levels of concentrations range from 1.8 to 11.4 mg g−1 OC (sum of PAHs. Diagnostic ratios are consistent with reference ratios from literature but are not sufficient to differentiate the species of woods. Concerning isotopic methodology, PAH molecular isotopic compositions are specific for each species and contrary to molecular fingerprints, significant variations of δ13C are observed for the panel of PAHs. This work allows differentiating wood combustion (with δ13CPAH = −28.7 to −26.6‰ from others origins of particulate matter (like vehicular exhaust using isotopic measurements but also confirms the necessity to investigate source characterisation at the emission in order to help and complete source assessment models. These first results on woodburnings will be useful for the isotopic approach to source tracking.

  17. Methodology for choice of harvesting system for energy wood from early thinning

    Energy Technology Data Exchange (ETDEWEB)

    Laitila, J.

    2012-11-01

    The primary aim of the present study was to develop a methodology for estimating the procurement cost of forest chips from early thinnings. The most common logging systems and supply chains of forest chips used in early thinnings in Finland were compared at stand and regional level using productivity models and cost parameters obtained mainly from the substudies of this thesis. Furthermore, a decision tree was constructed for selecting harvesting method for energy wood originating from early thinnings. Forwarding productivity following mechanised cutting was significantly higher compared to productivity after motor-manual cutting. Mechanised cutting by the harvester enables felling and bunching of whole trees into large grapple loads close to strip roads, which facilitates increasing forwarding output and reducing costs. The two-machine system comprised of a harvester and a forwarder was the most cost-efficient logging system due to higher efficiency in cutting and especially in the forwarding phase. The cost of motor-manual whole-tree cutting was equal to mechanised whole-tree cutting, while forwarding cost after motor-manual cutting was almost double that after mechanised cutting. Using a forwarderbased harwarder resulted in the highest logging costs. However, with large tree volumes and removals its costs were almost equal to those of motor-manual-based logging. In order to achieve a breakthrough for the harwarder system, costs must be reduced by improving both machine technology and working techniques. Available volumes and procurement costs of fuel chips made of small-diameter trees were compared at regional level. The trees were harvested either by the multi-stem delimbed shortwood or whole-tree method and chipped by a truck-mounted drum chipper at the roadside. Based on the availability analysis, delimbing reduced regional cutting recovery by 42% compared to whole tree harvesting, when the minimum concentration of energy wood was set at 25 m{sup 3} ha{sup -1

  18. Comparison of ultrasonic with stirrer performance for removal of sunset yellow (SY) by activated carbon prepared from wood of orange tree: artificial neural network modeling.

    Science.gov (United States)

    Ghaedi, A M; Ghaedi, M; Karami, P

    2015-03-05

    The present work focused on the removal of sunset yellow (SY) dye from aqueous solution by ultrasound-assisted adsorption and stirrer by activated carbon prepared from wood of an orange tree. Also, the artificial neural network (ANN) model was used for predicting removal (%) of SY dye based on experimental data. In this study a green approach was described for the synthesis of activated carbon prepared from wood of an orange tree and usability of it for the removal of sunset yellow. This material was characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The impact of variables, including initial dye concentration (mg/L), pH, adsorbent dosage (g), sonication time (min) and temperature (°C) on SY removal were studied. Fitting the experimental equilibrium data of different isotherm models such as Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models display the suitability and applicability of the Langmuir model. Analysis of experimental adsorption data by different kinetic models including pseudo-first and second order, Elovich and intraparticle diffusion models indicate the applicability of the second-order equation model. The adsorbent (0.5g) is applicable for successful removal of SY (>98%) in short time (10min) under ultrasound condition. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Comparison of ultrasonic with stirrer performance for removal of sunset yellow (SY) by activated carbon prepared from wood of orange tree: Artificial neural network modeling

    Science.gov (United States)

    Ghaedi, A. M.; Ghaedi, M.; Karami, P.

    2015-03-01

    The present work focused on the removal of sunset yellow (SY) dye from aqueous solution by ultrasound-assisted adsorption and stirrer by activated carbon prepared from wood of an orange tree. Also, the artificial neural network (ANN) model was used for predicting removal (%) of SY dye based on experimental data. In this study a green approach was described for the synthesis of activated carbon prepared from wood of an orange tree and usability of it for the removal of sunset yellow. This material was characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The impact of variables, including initial dye concentration (mg/L), pH, adsorbent dosage (g), sonication time (min) and temperature (°C) on SY removal were studied. Fitting the experimental equilibrium data of different isotherm models such as Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models display the suitability and applicability of the Langmuir model. Analysis of experimental adsorption data by different kinetic models including pseudo-first and second order, Elovich and intraparticle diffusion models indicate the applicability of the second-order equation model. The adsorbent (0.5 g) is applicable for successful removal of SY (>98%) in short time (10 min) under ultrasound condition.

  20. Structure and Photocatalytic Properties of Mn-Doped TiO2 Loaded on Wood-Based Activated Carbon Fiber Composites

    Directory of Open Access Journals (Sweden)

    Xiaojun Ma

    2017-06-01

    Full Text Available Mn-doped TiO2 loaded on wood-based activated carbon fiber (Mn/TiO2-WACF was prepared by sol–gel and impregnation method using MnSO4·H2O as manganese source. The structure of Mn/TiO2–WACF was characterized by SEM, XRD, FTIR, N2 adsorption and UV–Vis, and its photocatalytic activity for methylene blue degradation was investigated. Results show that Mn-doped TiO2 were loaded on the surface of wood-based activated carbon fiber with high-development pore structures. The crystallite sizes of Mn-doped TiO2 in composites were smaller than that of the undoped samples. With an increase of Mn doping content, Ti–O bending vibration intensity of Mn/TiO2–WACF increased and then decreased. Moreover, Ti–O–Ti and Ti–O–Mn absorption peaks increased upon doping of Mn. Mn/TiO2–WACF with low specific surface area, and pore volume was improved at 3.5–6.0 nm of mesopore distributions due to the Mn-doped TiO2 load. In addition, the UV–Vis showed that Mn/TiO2–WACF (photodegradation rate of 96% has higher photocatalytic activity than the undoped samples for methylene blue degradation under visible light irradiation.

  1. Age-related and stand-wise estimates of carbon stocks and sequestration in the aboveground coarse wood biomass of wetland forests in the northern Pantanal, Brazil

    Science.gov (United States)

    Schöngart, J.; Arieira, J.; Felfili Fortes, C.; Cezarine de Arruda, E.; Nunes da Cunha, C.

    2011-11-01

    In this study we use allometric models combined with tree ring analysis to estimate carbon stocks and sequestration in the aboveground coarse wood biomass (AGWB) of wetland forests in the Pantanal, located in central South America. In four 1-ha plots in stands characterized by the pioneer tree species Vochysia divergens Pohl (Vochysiaceae) forest inventories (trees ≥10 cm diameter at breast height, D) have been performed and converted to estimates of AGWB by two allometric models using three independent parameters (D, tree height H and wood density ρ). We perform a propagation of measurement errors to estimate uncertainties in the estimates of AGWB. Carbon stocks of AGWB vary from 7.8 ± 1.5 to 97.2 ± 14.4 Mg C ha-1 between the four stands. From models relating tree ages determined by dendrochronological techniques to C-stocks in AGWB we derived estimates for C-sequestration which differs from 0.50 ± 0.03 to 3.34 ± 0.31 Mg C ha-1 yr-1. Maps based on geostatistic techniques indicate the heterogeneous spatial distribution of tree ages and C-stocks of the four studied stands. This distribution is the result of forest dynamics due to the colonizing and retreating of V. divergens and other species associated with pluriannual wet and dry episodes in the Pantanal, respectively. Such information is essential for the management of the cultural landscape of the Pantanal wetlands.

  2. Carbon stocks in Norwegian forested systems. Preliminary data

    Directory of Open Access Journals (Sweden)

    Oyen BH.

    2000-01-01

    Full Text Available Between 1990 and 2010 the projected emissions of greenhouse gases in Norway is assumed to increase 24%. As a signatory to the Kyoto Protocol, Norway is supposed to limit the greenhouse gas emissions in the period 2008–2012 to 1% above the 1990 level. Potentially, forestry activities may contribute as a means to achieve the set target of emission reductions. The initial Norwegian views and proposals for definitions and accounting framework for activities under Articles 3.3 and 3.4 of the Kyoto Protocol was reported to the UNFCCC August 1 2000 by the Norwegian Ministry of Environment. There was also an annex to the submission with preliminary data and information on Articles 3.3 and 3.4 of the Kyoto Protocol. This paper is based on this annex, and focuses mainly on data for forests and other woodlands. Preliminary data indicate that approximately 85% of the carbon (C pool of forested systems is found in the soil. The major part of the annual C sequestration takes place in living biomass and soil, while sequestration in wood products and landfills etc. has been found to be of minor importance. It must be noted that the reported data are preliminary and contain large uncertainties.

  3. Chemically modified carbonic anhydrases useful in carbon capture systems

    Science.gov (United States)

    Novick, Scott; Alvizo, Oscar

    2013-01-15

    The present disclosure relates to chemically modified carbonic anhydrase polypeptides and soluble compositions, homogenous liquid formulations comprising them. The chemically modified carbonic anhydrase polypeptides have improved properties relative to the same carbonic anhydrase polypeptide that is not chemically modified including the improved properties of increased activity and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides methods of preparing the chemically modified polypeptides and methods of using the chemically modified polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering.

  4. Chemically modified carbonic anhydrases useful in carbon capture systems

    Energy Technology Data Exchange (ETDEWEB)

    Novick, Scott J; Alvizo, Oscar

    2013-10-29

    The present disclosure relates to chemically modified carbonic anhydrase polypeptides and soluble compositions, homogenous liquid formulations comprising them. The chemically modified carbonic anhydrase polypeptides have improved properties relative to the same carbonic anhydrase polypeptide that is not chemically modified including the improved properties of increased activity and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides methods of preparing the chemically modified polypeptides and methods of using the chemically modified polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering.

  5. Designing Microporus Carbons for Hydrogen Storage Systems

    Energy Technology Data Exchange (ETDEWEB)

    Alan C. Cooper

    2012-05-02

    An efficient, cost-effective hydrogen storage system is a key enabling technology for the widespread introduction of hydrogen fuel cells to the domestic marketplace. Air Products, an industry leader in hydrogen energy products and systems, recognized this need and responded to the DOE 'Grand Challenge' solicitation (DOE Solicitation DE-PS36-03GO93013) under Category 1 as an industry partner and steering committee member with the National Renewable Energy Laboratory (NREL) in their proposal for a center-of-excellence on Carbon-Based Hydrogen Storage Materials. This center was later renamed the Hydrogen Sorption Center of Excellence (HSCoE). Our proposal, entitled 'Designing Microporous Carbons for Hydrogen Storage Systems,' envisioned a highly synergistic 5-year program with NREL and other national laboratory and university partners.

  6. System and operational data for wood-chip fired district heating plants; Anlaegs- og driftsdata for flisfyrede varmevaerker

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    The report describes conditions related to the 30 wood-chip fired district heating plants operating in Denmark at the beginning of 1994. The aim was to produce a survey of the technical installations as an aid to the establishment of future plants and to give leading personnel a collection of data as a means of comparison to help them in fault-finding procedures at their own plants. Detailed information, such as addresses, telephone numbers, capacity, design, contact persons in the case of each plant is found in the appendices. Otherwise information is given, in some cases illustrated by tables, graphs or a map (and related to the whole group of plants) on capacities, years of installation, storage conditions, transportation, stoking systems, flue gas cleaning and condensation, boilers, handling of ash etc. Operational and economical data are also presented. Two plants fired with wood pellets are described in addition to a cogeneration plant, Maabjergvaerket ved Holstebro, Denmark, that uses wood chips as fuel in conjunction with wastes, straw and natural gas. The quality of wood chips of various shapes and sizes was also investigated, based on examples from 13 of the 30 plants, and the results are presented in graphs. (AB)

  7. High Risk Posture on Motor-Manual Short Wood Logging System in Acacia mangium Plantation

    Directory of Open Access Journals (Sweden)

    Efi Yuliati Yovi

    2015-06-01

    Full Text Available Motor-manual logging has been considered as the most dominant logging system in Java Island, Indonesia. The system-which consisted of felling, delimbing, bucking, hauling, and transporting activities- involves a combination of stress factors e.q. difficult work postures, generation of force, and lifting techniques. In the other hand, combination of the three is well associated with high risk of work-related musculoskeletal injuries (MSIs, including musculoskeletal disorders. This research aimed to assess difficult work posture on felling, delimbing, bucking, and manually short wood hauling by employing rapid entire body assessment (REBA technique and muscular pain scoring based on the worker's perceive. It was revealed that felling and manual hauling were scored 4 in the REBA action level, indicated very high MSIs risk level, and categorized as “necessary now” for an injury risk preventive action. The workers' pain scoring indicated that low back (spine in general disorders resulting in low back pain has been considered to be the one of the leading safety issues in the felling and manual hauling. Regardless to complex mechanism of how the personal risk and environmental factors associated with manual material handling injuries, job-related factors approach should be underlined in the MSIs prevention initiative in motor-manual logging. Keywords: motor-manual logging, difficult work posture, REBA, MSIs, low back pain

  8. Bioprocessing preservative-treated waste wood

    Science.gov (United States)

    Barbara L. Illman; Vina W. Yang; Les. Ferge

    2000-01-01

    Disposal of preservative-treated waste wood is a growing problem worldwide. Bioprocessing the treated wood offers one approach to waste management under certain conditions. One goal is to use wood decay fungi to reduce the volume of waste with an easily managed system in a cost-effective manner. Wood decay fungi were obtained from culture collections in the Mycology...

  9. ACCELERATED LABORATORY TEST OF THREE AMAZONIAN WOOD SPECIES CALLED TAUARI, EXPOSED TO WHITE- AND BROWN-ROT FUNGI AND COLOR RESPONSE ACCORDING TO CIE L* A* B* SYSTEM

    Directory of Open Access Journals (Sweden)

    Esmeralda Yoshico Arakaki Okino

    2015-01-01

    Full Text Available The purposes of this study were to: evaluate de natural durability of three species of tauari ( Couratari guianensis Aublet , Couratari oblongifolia Ducke & R.Knuth and Couratari stellata A.C.Smith, report the colorimetric parameters according to CIE L*a*b* 1976 system and also show the appearance of control and attacked wood blocks. Two brown-rot [ Gloeophyllum trabeum (Persoon ex Fries Murril. and Lentinus lepideus Fr.] and two white-rot [ Trametes versicolor (Linnaeus ex Fries Pilat and Ganoderma applanatum (Pers. ex Wallr.] fungi were used . Tauari wood was classed as “moderately resistant” to “resistant” when exposed to Gloeophyllum trabeum, Trametes versicolor and Ganoderma applanatum fungi. All extractives’ contents of attacked samples decreased when compared with the control (sound wood, except Couratari stellata exposed to Ganoderma applanatum. Conversely, all ash contents increased when compared with the control, except Couratari stellata exposed to Gloeophyllum trabeum. All attacked wood blocks and wood meal samples were darker, except wood meal from Couratari stellata exposed to Trametes versicolor , and redder than the control. The ∆ E* mean value in attacked wood blocks and wood meal samples attained 29.5 and 14.3, respectively.

  10. Methanol production from eucalyptus wood chips. Attachment IV. Health and safety aspects of the eucalypt biomass to methanol energy system

    Energy Technology Data Exchange (ETDEWEB)

    Fishkind, H.H.

    1982-06-01

    The basic eucalyptus-to-methanol energy process is described and possible health and safety risks are identified at all steps of the process. The toxicology and treatment for exposure to these substances are described and mitigating measures are proposed. The health and safety impacts and risks of the wood gasification/methanol synthesis system are compared to those of the coal liquefaction and conversion system. The scope of this report includes the health and safety risks of workers (1) in the laboratory and greenhouse, where eucalyptus seedlings are developed, (2) at the biomass plantation, where these seedlings are planted and mature trees harvested, (3) transporting these logs and chips to the refinery, (4) in the hammermill, where the logs and chips will be reduced to small particles, (5) in the methanol synthesis plant, where the wood particles will be converted to methanol, and (6) transporting and dispensing the methanol. Finally, the health and safety risks of consumers using methanol is discussed.

  11. Coal bottom ash and pine wood peelings as root substrates in a circulating nutriculture system

    Energy Technology Data Exchange (ETDEWEB)

    Woodard, M.A.; Bearce, B.C.; Cluskey, S.; Townsend, E. (West Virginia University, Morgantown, WV (USA). Division of Plant and Soil Science)

    1993-06-01

    'Inca Yellow' marigolds ([ital Tagetes erecta L.]) were planted in polyethylene bags containing coal bottom ash (CBA), pine wood peelings (PWP), a mixture of 1 CBA: 1 PWP (v/v), and loose Grodan Rockwool (RW) and grown in a circulating nutriculture system. Three fertigation frequencies of 12,6, or 4 cycles per 12-hour light period were set with a duration of 5 minutes each. Flower diameters of marigolds grown in CBA, PWP, and CBA-PWP exceeded flower diameters of RW-grown marigolds, and days from planting to harvest were less in CBA and CBA-PWP than in the other two media. There was no interaction between medium and fertigation frequency. Foliar analysis showed no significant differences in plant elemental composition among root media or fertigation frequencies. Postharvest PWP water extracts contained higher P levels than extracts of other media, and CBA-PWP water extracts contained higher K, Ca, and Mg. In the CBA-PWP mixture, decomposition products from PWP may have increased P solubility and solubilized the K, Ca, and Mg in CBA.

  12. Deviation from the Kadowaki-Woods relation in Yb-based intermediate-valence systems

    CERN Document Server

    Tsujii, N; Kosuge, K

    2003-01-01

    The T sup 2 -coefficient of the electrical resistivity, A, is compared with the electronic specific heat coefficient, gamma, for a number of Yb-based compounds. It is revealed that many systems, including YbCuAl, YbInCu sub 4 , YbAl sub 3 , and YbCu sub 5 , show A/gamma sup 2 values close to 0.4 x 10 sup - sup 6 mu OMEGA cm mol sup 2 K sup 2 mJ sup - sup 2 , which are remarkably small compared to those obtained from an expression known as the Kadowaki-Woods relation: A/gamma sup 2 = 1.0 x 10 sup - sup 5 mu OMEGA cm mol sup 2 K sup 2 mJ sup - sup 2. Empirically, the compounds with the smaller A/gamma sup 2 values appear to show weak intersite magnetic correlation and/or to have almost fully degenerate (J = 5/2 or 7/2) ground states.

  13. Assessing Geographic Information Systems (GIS) Use in Marketing Applications: A Case of Study in the Wood Products Industry

    OpenAIRE

    Brenes Bastos, Melissa

    2014-01-01

    Geographical Information Systems (GIS) is a worldwide growing technology, however it is not yet completely accepted. Of all of the business processes in an organization, marketing is perhaps one of the natural fitting-processes to apply GIS. Even though there is recent research regarding applications of GIS in the wood products industry, those applications are mostly related to biomass mapping and logistics issues. Little research has been conducted on the utilization of GIS as part of the ma...

  14. Characterization of black carbon and organic contaminants in wood ash from different feedstocks and types of furnaces

    Science.gov (United States)

    Merino, Agustin; Rey-Salgueiro, Ledicia; Omil, Beatriz; Martinez-Carballo, Elena; Simal-Gandara, Jesus

    2015-04-01

    Due to their important concentration of nutrient and charcoal, wood ash from biomass power plants (WA) can be used as a fertilizer and organic amendment in intensively managed soils. Unlike biochar produced in under anoxic conditions, the nature of the organic compounds present in wood ash has been scarcely studied. Due to the incomplete combustion, wood ash may contain a wide range of organic compounds, from charred to highly condensed refractory biomass, which determines the possibilities of WA as an organic amendment. In addition, the possible environmental risk of this practice must be assessed by determining the content of water-soluble and insoluble organic contaminants. due to the incomplete combustion of organic matter, organic pollutants, such as Polycyclic Aromatic Hydrocarbons (PAHs), can be formed and can remain in the combustion residue. Also, the four alkyl benzene volatile organic compounds (benzene, toluene, ethylbenzene, and the ortho, para, and meta xylenes) can be formed, depending on certain conditions during combustion. For this study 15 biomass power stations in Spain were selected. In all of them the feedstock is pine or eucalyptus branches and bark. Nine of them were bottom wood ash generated from wood fires furnaces, obtained from grate-fired or water-tube boilers. Whereas four of them were fly ash, obtained in cyclone separators. The samples were collected following a common procedure to ensure the representiveness of the sampling. Bottom ash samples were fraccionated in three fractions: 5mm. Each fraction was characterized for organic matter and BTEX, styrene and total petroleum hydrocarbons Polycyclic Aromatic Hydrocarbons. For each analyzes, three replicates were analyzed per sample. Mixes wood ash shows higher amounts of charred material than fly ash. The 13 C CPMAS NMR, DSC/TG and FTIR analysis showed the loss of carbohydrates and aliphatic constituents and revealed the formation of aromatic compounds. The atomic H/C ratios, NMR

  15. Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

    Science.gov (United States)

    Gerasimov, Yuri; Sokolov, Anton

    2014-03-01

    A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  16. Wood composites

    Science.gov (United States)

    Lars Berglund; Roger M. Rowell

    2005-01-01

    A composite can be defined as two or more elements held together by a matrix. By this definition, what we call “solid wood” is a composite. Solid wood is a three-dimensional composite composed of cellulose, hemicelluloses and lignin (with smaller amounts of inorganics and extractives), held together by a lignin matrix. The advantages of developing wood composites are (...

  17. Functional Wood

    OpenAIRE

    Cronhjort, Yrsa (ed.); Hughes, Mark (ed.); Paakkanen, Mikko (ed.); Sahi, Karola (ed.); Tukiainen, Pekka (ed.); Tulamo, Tomi (ed.); Vahtikari, Katja (ed.)

    2016-01-01

    Design has been recognized as a key discipline to bring ideas to the market. In addition to current research on human perceptions and the functional capacities of wood, this publication demonstrates the potential of wood in various applications. The designs are the results of three design courses, implemented during 2015 and 2016 at Aalto University in Finland. The Masters student courses included two Wood Studios at Aalto University’s School of Arts, Design and Architecture and the Integrate...

  18. Changes in the water-table altitude of the unconfined aquifer, Wood River Valley aquifer system, south-central Idaho, October 2006 to October 2012.

    Data.gov (United States)

    Department of the Interior — Water levels in 93 wells completed in the Wood River Valley aquifer system were measured during October 22–24, 2012; these wells are part of a network established...

  19. Changes in the potentiometric-surface altitude of the confined aquifer, Wood River Valley aquifer system, south-central Idaho, October 2006 to October 2012.

    Data.gov (United States)

    Department of the Interior — Water levels in 93 wells completed in the Wood River Valley aquifer system were measured during October 22–24, 2012; these wells are part of a network established...

  20. Wells measured for water-levels, unconfined and confined aquifers, Wood River Valley aquifer system, south-central Idaho, October 2006 and October 2012.

    Data.gov (United States)

    Department of the Interior — Water levels in 93 wells completed in the Wood River Valley aquifer system were measured during October 22–24, 2012; these wells are part of a network established...

  1. Estimated Altitude of the Consolidated Rock Surface Underlying Quaternary Sediments of the Wood River Valley aquifer system, South-Central Idaho

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset is the estimated altitude of the consolidated rock surface underlying Quaternary sediment of the Wood River Valley aquifer system. This surface is...

  2. Estimated Altitude of the Top of the Uppermost Unit of Fine-Grained Sediment within the Wood River Valley aquifer system, South-Central Idaho

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset is the estimated altitude of the top of the uppermost fine-grained sediment within the Wood River Valley aquifer system. This map was compiled by...

  3. Graded Density Carbon Bonded Carbon Fiber (CBCF) Preforms for Lightweight Ablative Thermal Protection Systems (TPS) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — FMI currently manufactures Phenolic Impregnated Carbon Ablator (PICA) material for Thermal Protection Systems (TPS) systems, such as the Stardust Sample Return...

  4. Research of System Building Basing on the Low Carbon Economy About Carbon Accounting for the Enterprise

    Directory of Open Access Journals (Sweden)

    Yao Liqiong

    2016-01-01

    Full Text Available As global warming has become truth, is developing as a new economic model, The new economic development model has given rise to an important branch of environmental accounting, namely carbon accounting. At first, this paper discusses the carbon accounting theoretical foundation comprehensively, and then analyzes the environment of the construction of the carbon accounting system. The focus of the article is to build enterprise carbon accounting system, it covers the confirmation and measurement, record and information disclosure of the enterprise carbon accounting on the way of low carbon economy, its core is the processing of carbon emission rights, information disclosure mode and content, etc.; The purpose of this paper is to build enterprise carbon accounting system which is suitable for China’s national conditions, in order to provide certain reference and theoretical support for the low carbon economy development of our country.

  5. Is it economical to manage jointly for wood and carbon under the Climate Action Reserve Protocol? In: Standiford, Richard B.; Weller, Theodore J.; Piirto, Douglas D.; Stuart, John D., tech

    Science.gov (United States)

    Richard P. Thompson; Steve R. Auten

    2012-01-01

    To quantify the benefits and costs of modifying forest management for additional climate benefits, Cal Poly's Swanton Pacific demonstration forest was used to test the Climate Action Reserve's protocol and identify management strategies for both wood and carbon markets. Residing in the Southern Sub-district with its clearcutting restrictions, Swanton offers...

  6. Proposal of new wood processing industry system. Part 2. ; Project to develop compound system for high grade utilization of wood. Atarashii mokuzai kako kogyo system no teian. 2. ; Mokuzai kodo riyo fukugoka system kaihatsu jigyo yori

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    Already acknowledged to be important with a nationwide commonness, the wood drying is judged to be effective as a method for preventing the product from causing trouble and heightening its value. Such being the background, the present report introduces an automated water content control system, developed through testing a continuous type automatic water content measurement plant, high in usability for the general purpose as a water content checking mechanism for the dried wooden material. The sawed and screened lumber is conveyed to the machining, storage/curing/redrying or other treatment process as judged by the personnel in charge. Giving heed to the standardization of wooden material for the housing, application of FA into the work process and further rationalization in the construction process of wooden house, the Forestry and Forest Product Research Institute proceeds with research to aim at developing a wooden house construction method to take the local characteristics into consideration against the snowfall and extreme coldness in Hokkaido. An Obihiro City-based cooperative research group, having been proceeding with R and D on/of the improvement in work process with the above Institute, individually develops an FA material production control system, freely using a CAD/CAM system, for the housing members. 9 figs.

  7. Experiment on the combined combustion of wood chips and sliced straw at a wood-chip firing system at the Maabjerg plant; Forsoeg med samfyring af flis og snittet halm via flisfyringssystemet paa Maalbjergvaerket

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    As during the last two years there have been insufficient supplies of straw for fuelling purposes in Denmark a number of combustion systems in straw-fuelled district heating plants have been adapted for burning wood other tyupes of biofuels. The aim was to demonstrate possibilities for burning sliced straw with a high moisture content and for managing and combusting various mixtures of straw and wood chips and the Maarbjerg plant in Denmark. The combustion processes are described. It is concluded that the plant must be further adapted in order to burn loose sliced straw efficiently but there were no problems connected to the combustion of a mixture of straw and wood chips. (AB)

  8. Biocentricity and economy of scale : hypothesis (and product) testing when wood is a part of an experimental system evaluating durability

    Science.gov (United States)

    Alex C. Wiedenhoeft

    2009-01-01

    Wood is a biological material, and its structure and organization are relicts of its biogenesis. From the hydrogen bonding of water molecules in the cell wall to extractives bleeding from knots in siding, the characteristics and behavior of wood are derived from its biological origin; this is my unashamedly biocentric view of wood structure. The structure of wood...

  9. Evaluation of Gas, Oil and Wood Pellet Fueled Residential Heating System Emissions Characteristics

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.

    2009-12-01

    This study has measured the emissions from a wide range of heating equipment burning different fuels including several liquid fuel options, utility supplied natural gas and wood pellet resources. The major effort was placed on generating a database for the mass emission rate of fine particulates (PM 2.5) for the various fuel types studied. The fine particulates or PM 2.5 (less than 2.5 microns in size) were measured using a dilution tunnel technique following the method described in US EPA CTM-039. The PM 2.5 emission results are expressed in several units for the benefit of scientists, engineers and administrators. The measurements of gaseous emissions of O{sub 2}, CO{sub 2}, CO, NO{sub x} and SO{sub 2} were made using a combustion analyzer based on electrochemical cells These measurements are presented for each of the residential heating systems tested. This analyzer also provides a steady state efficiency based on stack gas and temperature measurements and these values are included in the report. The gaseous results are within the ranges expected from prior emission studies with the enhancement of expanding these measurements to fuels not available to earlier researchers. Based on measured excess air levels and ultimate analysis of the fuel's chemical composition the gaseous emission results are as expected and fall within the range provided for emission factors contained in the US-EPA AP 42, Emission Factors Volume I, Fifth Edition. Since there were no unexpected findings in these gaseous measurements, the bulk of the report is centered on the emissions of fine particulates, or PM 2.5. The fine particulate (PM 2.5) results for the liquid fuel fired heating systems indicate a very strong linear relationship between the fine particulate emissions and the sulfur content of the liquid fuels being studied. This is illustrated by the plot contained in the first figure on the next page which clearly illustrates the linear relationship between the measured mass of

  10. Fourier transform Raman spectroscopic studies of a novel wood pulp bleaching system

    Science.gov (United States)

    Weinstock, Ira A.; Atalla, Rajai H.; Agarwal, Umesh P.; Minor, James L.; Petty, Chris

    1993-06-01

    The use of near-infrared (NIR) Fourier transform (FT) Raman spectroscopy for the study of lignocellulosic materials is discussed. An application utilizing NIR FT-Raman spectroscopy to study a novel chlorine-free process for the bleaching of wood pulps is presented in detail. The new process, still under development, entails the oxidation of residual lignin in wood pulps by vanadium-substituted polyoxometalates, and reoxidation of the reduced polyoxometalates by chlorine-free oxidants such as air, dioxygen, peroxides or ozone. Results from FT-Raman measurements of polyoxometalate-treated pulps are compared with those from chemical, spectroscopic and optical techniques commonly used in the pulp and paper industry.

  11. Effects of first-row transition metals and impregnation ratios on the physicochemical properties of microwave-assisted activated carbons from wood biomass.

    Science.gov (United States)

    Thue, Pascal S; Lima, Eder C; Sieliechi, Joseph M; Saucier, Caroline; Dias, Silvio L P; Vaghetti, Julio C P; Rodembusch, Fabiano S; Pavan, Flávio A

    2017-01-15

    First-row transition metals (Co, Ni, Cu and Zn) were successfully used in the preparation of activated carbons from wood biomass via microwave-assisted irradiation. Physical-chemical properties of the produced materials (MWAC) were studied by nitrogen adsorption-desorption curves, SEM, FTIR, UV-vis DRS and synchronous fluorescence spectroscopy, CHN elemental analysis, TGA/DTG, pHzpc, hydrophobic properties, and total acidity and basicity groups. Results showed that the metals were bound successfully in different amounts with surface functional groups of the wood biomass through ion exchange and surface complexation interaction during the impregnation step. Zn(2+) and Cu(2+) formed the most complexes. MWAC impregnated with Zn(2+) showed higher pore volumes and surface areas, followed by Cu(2+), Co(2+) and Ni(2+), independently of the ratio used. As the metal : biomass ratio was increased from 0.5 to 2, the surface area of MWAC increased from 300 to 620m(2)g(-1) for Co-MC, 260 to 381m(2)g(-1) for Ni-MC, 449 to 765m(2)g(-1) for Cu-MC and from 572 to 1780m(2)g(-1) for Zn-MC. The samples showed high values of carbon contents and oxygen-containing groups. An adsorption experiment revealed that samples prepared using ZnCl2 showed the highest sorption capacities (qe) for the tested adsorbates, followed by CuCl2, CoCl2 and NiCl2. These results matched with the surface areas and pore volumes trends, which were found to follow atomic number and melting point trends-Ni(II)phenol>bisphenol A>hydroquinone>4-nitro phenol>2-naphtol>paracetamol>caffeine>resorcinol. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Wood preservation

    Science.gov (United States)

    Rebecca E. Ibach

    1999-01-01

    When left untreated in many outdoor applications, wood becomes subject to degradation by a variety of natural causes. Although some trees possess naturally occurring resistance to decay (Ch. 3, Decay Resistance), many are in short supply or are not grown in ready proximity to markets. Because most commonly used wood species, such as Southern Pine, ponderosa pine, and...

  13. Dynamic karyotype evolution and unique sex determination systems in Leptidea wood white butterflies.

    Science.gov (United States)

    Šíchová, Jindra; Voleníková, Anna; Dincă, Vlad; Nguyen, Petr; Vila, Roger; Sahara, Ken; Marec, František

    2015-05-19

    Chromosomal rearrangements have the potential to limit the rate and pattern of gene flow within and between species and thus play a direct role in promoting and maintaining speciation. Wood white butterflies of the genus Leptidea are excellent models to study the role of chromosome rearrangements in speciation because they show karyotype variability not only among but also within species. In this work, we investigated genome architecture of three cryptic Leptidea species (L. juvernica, L. sinapis and L. reali) by standard and molecular cytogenetic techniques in order to reveal causes of the karyotype variability. Chromosome numbers ranged from 2n = 85 to 91 in L. juvernica and 2n = 69 to 73 in L. sinapis (both from Czech populations) to 2n = 51 to 55 in L. reali (Spanish population). We observed significant differences in chromosome numbers and localization of cytogenetic markers (rDNA and H3 histone genes) within the offspring of individual females. Using FISH with the (TTAGG) n telomeric probe we also documented the presence of multiple chromosome fusions and/or fissions and other complex rearrangements. Thus, the intraspecific karyotype variability is likely due to irregular chromosome segregation of multivalent meiotic configurations. The analysis of female meiotic chromosomes by GISH and CGH revealed multiple sex chromosomes: W1W2W3Z1Z2Z3Z4 in L. juvernica, W1W2W3Z1Z2Z3 in L. sinapis and W1W2W3W4Z1Z2Z3Z4 in L. reali. Our results suggest a dynamic karyotype evolution and point to the role of chromosomal rearrangements in the speciation of Leptidea butterflies. Moreover, our study revealed a curious sex determination system with 3-4 W and 3-4 Z chromosomes, which is unique in the Lepidoptera and which could also have played a role in the speciation process of the three Leptidea species.

  14. 46 CFR 169.565 - Fixed carbon dioxide system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Fixed carbon dioxide system. 169.565 Section 169.565... Lifesaving and Firefighting Equipment Firefighting Equipment § 169.565 Fixed carbon dioxide system. (a) The number of pounds of carbon dioxide required for each space protected must be equal to the gross volume of...

  15. Wood-burning appliances and indoor air quality.

    Science.gov (United States)

    Lévesqu, B; Allaire, S; Gauvin, D; Koutrakis, P; Gingras, S; Rhainds, M; Prud'Homme, H; Duchesne, J F

    2001-12-17

    Wood heating represents an interesting economic alternative to electrical or heating oil and gas systems. However, many people are concerned about poor indoor air quality in homes equipped with wood-burning appliances. We conducted a study in the Quebec City region (Canada) to verify the extent of indoor air contamination, and to examine the frequency of respiratory symptoms and illnesses among occupants of wood-heated homes. One child attending primary school (median = 8 years old; range = 5-14 years old) and an adult (median = 37 years old; range = 23-52 years old) were recruited in each eligible house. Eligible houses were without known sources of combustion products (smokers, attached garage, oil or gas furnace, gas stove, etc.) except for wood-burning appliance. Out of the 89 houses included in the study, 59 had wood-burning appliances. Formaldehyde, nitrogen dioxide, respirable particles (PM10) and carbon monoxide were measured in a sub-set of 49 houses (41 with a wood-burning appliance and 8 without). The frequency of respiratory symptoms and diseases among participants were documented using a daily symptom diary. Concentrations of contaminants were low in most houses, both with or without a wood-burning appliance. Globally, there was no consistent relationship between the presence of a wood-burning appliance and respiratory morbidity in residents. Nevertheless, residents who mentioned being exposed to fumes emitted by such an appliance reported more respiratory illnesses and symptoms. The presence of animals or molds, and keeping windows closed most of the time in winter were other factors associated with respiratory problems. We conclude that wood burning appears to be a respiratory health risk for occupants if the appliance is not maintained and used properly.

  16. Comparative metagenomic profiling reveals lignocellulose degrading systems in microbial communities associated with wood-feeding insects

    Science.gov (United States)

    The Asian longhorned beetle (Anoplophora glabripennis) is an invasive, wood-boring pest that thrives in the heartwood of deciduous tree species. The biggest impediment faced by A. glabripennis as it feeds on woody tissue is lignin, a highly recalcitrant biopolymer that reduces access to sugars locke...

  17. DEMONSTRATION OF NO-VOC/NO-HAP WOOD FURNITURE COATING SYSTEM

    Science.gov (United States)

    The United States Environmental Protection Agency has contracted with AeroVironment Environmental Services, Inc. and its subcontractor, Adhesives Coating Co., to develop and demonstrate a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating s...

  18. Intelligent Heat System – high energy efficient wood stoves with low emissions

    DEFF Research Database (Denmark)

    Illerup, Jytte Boll; Nickelsen, Joachim; Hansen, Brian Brun

    2016-01-01

    . Emission measurements at the research wood stove set-up at DTU Chemical Engineering showed generally low emissions of particles, well below current standards, and high energy efficiency. The highest emissions of CO, VOC and PM were seen in the ignition phase while only a small particle peak was observed...

  19. Geographic information system-based spatial analysis of sawmill wood procurement

    Science.gov (United States)

    Nathaniel M. Anderson; Rene H. Germain; Eddie Bevilacqua

    2011-01-01

    In the sawmill sector of the forest products industry, the clustering of mills and wide variation in forest stocking and ownership result in sawlog markets that are complex and spatially differentiated. Despite the inherent spatial attributes of markets for stumpage and logs, few studies have used geospatial methods to examine wood procurement in detail across...

  20. Effects of large herbivores on wood pasture dynamics in a European wetland system

    NARCIS (Netherlands)

    Cornelissen, P.; Bokdam, J.; Sykora, K.V.; Berendse, F.

    2014-01-01

    Whether self-regulating large herbivores play a key role in the development of wood-pasture landscapes remains a crucial unanswered question for both ecological theory and nature conservation. We describe and analyse how a ‘partly self-regulating’ population of cattle, horses and red deer affected

  1. Multicomponent biocide systems protect wood from decay fungi, mold fungi, and termites for interior applications

    Science.gov (United States)

    Carol A. Clausen; Vina W. Yang

    2004-01-01

    Concerns about indoor air quality due to mold growth have increased dramatically in the United States. In the absence of proper moisture management, fungicides need to be developed for indoor use to control mold establishment. An ideal fungicide for prevention of indoor mold growth on wood-based materials needs to specifically prevent spore germination and provide long...

  2. The role of the hemicelluloses in the nanobiology of wood cell walls : a systems theoretic perspective

    Science.gov (United States)

    Rajai H. Atalla

    2005-01-01

    The hemicelluloses have not received adequate attention in studies of wood cell walls because the complexity of their structures does not admit easy interpretation within the paradigms of polymer science. Two-phase composite models of the cell wall have led many to view their primary function as one of coupling cellulose and lignin to enhance the mechanical properties...

  3. Carbon-Carbon Recuperators in Closed-Brayton-Cycle Nuclear Space Power Systems: A Feasibility Assessment

    Science.gov (United States)

    Barrett, Michael J.; Johnson, Paul K.

    2004-01-01

    The feasibility of using carbon-carbon recuperators in closed-Brayton-cycle (CBC) nuclear space power conversion systems (PCS) was assessed. Recuperator performance expectations were forecast based on projected thermodynamic cycle state values for a planetary mission. Resulting thermal performance, mass and volume for a plate-fin carbon-carbon recuperator were estimated and quantitatively compared with values for a conventional offset-strip-fin metallic design. Material compatibility issues regarding carbon-carbon surfaces exposed to the working fluid in the CBC PCS were also discussed.

  4. A guide to residential wood heating

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    Wood heating has a long history in Canada. Currently over three million Canadian households use wood-burning appliances for heating, or just to enjoy the ambience of a wood fire. This guide is one of a series of guides on renewable energy systems for residential use, compiled to assist Canadian householders to make informed decisions on renewable energy. This particular guide focuses on such matters as how to maintain the safety and efficiency of a wood heating system; how to purchase and store fuel wood; how to use fire management techniques for cleaner, virtually smokeless fires; and provides tips on what to ask when consulting wood-heating professionals. tabs., figs.

  5. Dangerous (toxic) atmospheres in UK wood pellet and wood chip fuel storage.

    Science.gov (United States)

    Simpson, Andrew T; Hemingway, Michael A; Seymour, Cliff

    2016-09-01

    There is growing use of wood pellet and wood chip boilers in the UK. Elsewhere fatalities have been reported, caused by carbon monoxide poisoning following entry into wood pellet storage areas. The aim of this work was to obtain information on how safely these two fuels are being stored in the UK. Site visits were made to six small-scale boiler systems and one large-scale pellet warehouse, to assess storage practice, risk management systems and controls, user knowledge, and potential for exposure to dangerous atmospheres. Real time measurements were made of gases in the store rooms and during laboratory tests on pellets and chips. Volatile organic compounds (VOCs) emitted and the microbiological content of the fuel was also determined. Knowledge of the hazards associated with these fuels, including confined space entry, was found to be limited at the smaller sites, but greater at the large pellet warehouse. There has been limited risk communication between companies supplying and maintaining boilers, those manufacturing and supplying fuel, and users. Risk is controlled by restricting access to the store rooms with locked entries; some store rooms have warning signs and carbon monoxide alarms. Nevertheless, some store rooms are accessed for inspection and maintenance. Laboratory tests showed that potentially dangerous atmospheres of carbon monoxide and carbon dioxide, with depleted levels of oxygen may be generated by these fuels, but this was not observed at the sites visited. Unplanned ventilation within store rooms was thought to be reducing the build-up of dangerous atmospheres. Microbiological contamination was confined to wood chips.

  6. Net carbon flux in organic and conventional olive production systems

    Science.gov (United States)

    Saeid Mohamad, Ramez; Verrastro, Vincenzo; Bitar, Lina Al; Roma, Rocco; Moretti, Michele; Chami, Ziad Al

    2014-05-01

    Agricultural systems are considered as one of the most relevant sources of atmospheric carbon. However, agriculture has the potentiality to mitigate carbon dioxide mainly through soil carbon sequestration. Some agricultural practices, particularly fertilization and soil management, can play a dual role in the agricultural systems regarding the carbon cycle contributing to the emissions and to the sequestration process in the soil. Good soil and input managements affect positively Soil Organic Carbon (SOC) changes and consequently the carbon cycle. The present study aimed at comparing the carbon footprint of organic and conventional olive systems and to link it to the efficiency of both systems on carbon sequestration by calculating the net carbon flux. Data were collected at farm level through a specific and detailed questionnaire based on one hectare as a functional unit and a system boundary limited to olive production. Using LCA databases particularly ecoinvent one, IPCC GWP 100a impact assessment method was used to calculate carbon emissions from agricultural practices of both systems. Soil organic carbon has been measured, at 0-30 cm depth, based on soil analyses done at the IAMB laboratory and based on reference value of SOC, the annual change of SOC has been calculated. Substracting sequestrated carbon in the soil from the emitted on resulted in net carbon flux calculation. Results showed higher environmental impact of the organic system on Global Warming Potential (1.07 t CO2 eq. yr-1) comparing to 0.76 t CO2 eq. yr-1 in the conventional system due to the higher GHG emissions caused by manure fertilizers compared to the use of synthetic foliar fertilizers in the conventional system. However, manure was the main reason behind the higher SOC content and sequestration in the organic system. As a resultant, the organic system showed higher net carbon flux (-1.7 t C ha-1 yr-1 than -0.52 t C ha-1 yr-1 in the conventional system reflecting higher efficiency as a

  7. Synthesis and characterisation of laboratory-charred grass straw (Oryza sativa) and chestnut wood (Castanea sativa) as reference materials for black carbon quantification

    Energy Technology Data Exchange (ETDEWEB)

    Hammes, Karen; Schmidt [Zurich Univ., Dept. of Geography, Zurich (Switzerland); Smernik, Ronald J. [Adelaide Univ., School of Earth and Environmental Sciences, Adelaide, SA (Australia); Skjemstad, Jan O. [CSIRO Land and Water, Glen Osmond, SA (Australia); Herzog, Andreas; Vogt, Ulrich F. [EMPA Materials Science and Technology, Lab. for High Performance Ceramics, Duebendorf (Switzerland)

    2006-11-15

    We synthesised large ( about 2 kg) quantities of two chars for use as commercially available reference materials for the quantification of black carbon (BC). We pyrolysed chestnut wood (Castanea sativa) and grass straw (Oryza sativa) at 450 deg C under a N{sub 2} atmosphere, which mimics the oxygen-free conditions on the inside of burning material at a moderate burning temperature. The charred materials were dominated by aromatic carbon (about 70%), had low H/C (about 0.7) and O/C (about 0.3) ratios and low surface areas (2-6 m{sup 2} g{sup -1} ). Isotopic changes on charring were small (<0.3 0/00). In these respects, the synthesised chars were similar to chars produced at low temperature (<500 deg C) in natural fires and thus may prove to be appropriate materials for calibrating BC quantification methods. Both chars have been used in a comparative study of BC quantification. (Author)

  8. Financial return from traditional wood products, feedstock, and carbon sequestration in loblolly pine plantations in the Southern U.S

    Science.gov (United States)

    Umesh K. Chaudhan; Michael B. Kane

    2015-01-01

    We know that planting trees is a key approach for mitigating climate change; however, we are uncertain of what planting density per unit of land and what cultural regimes are needed to optimize traditional timber products, feedstock, and carbon sequestration.

  9. The Integrated Carbon Observation System in Germany

    Science.gov (United States)

    Kutsch, Werner Leo

    2013-04-01

    Due to the strong anthropogenic disturbance of the global carbon cycle, carbon dioxide and other greenhouse gases increase in the atmosphere and contribute to climatic change. Currently, the ocean and the land biosphere still sequester parts of this anthropogenically emitted carbon dioxide. However, the sustainability of these sinks is not guaranteed. Measures to reduce emissions of greenhouse gases are depending on our ability to monitor atmospheric concentrations of greenhouse gases and changes in the environment with high precision. Understanding the complex interactions between the climate system and biosphere, hydrosphere as well as atmosphere must, therefore, be based on long-term precise and internationally comparable measurements. An infrastructure that provides these observations is the best investment for reducing uncertainties and for avoiding future surprises. In order to develop a long-term perspective for a European monitoring system for greenhouse gases the Integrated Carbon Observation System (ICOS) has been approved by the European Council of Research Ministries as an important research infrastructure and will be established officially as a European Research Infrastructure Consortium (ERIC) in 2013. ICOS will be organized as a decentralized research infrastructure with the observational networks run by national programs. The German component, ICOS-D, consists currently of a consortium of 13 research institutions, contributes to all monitoring networks and will provide the Central Analytical Laboratory (CAL), consisting of a Flask and Calibration Laboratory (FCL) and a Central Radiocarbon Laboratory (CRL) in Jena and Heidelberg, respectively, as central facilities for the entire ICOS Research Infrastructure (ICOS RI). In the Atmospheric Program continuous and grab sample measurements of trace gas concentrations as well as their isotopic composition will be conducted at tall-tower stations. In combination with transport models, these measurements

  10. Organic Carbon Dynamics in Glacier Systems

    Science.gov (United States)

    Barker, J.; Sharp, M.; Klassen, J.; Foght, J.; Turner, R.

    2004-12-01

    The biogeochemical cycling of organic carbon (OC) has important implications for aquatic system ecology because the abundance and molecular characteristics of OC influence contaminant transport and bioavailability, and determine its suitability as a substrate for microbial metabolism. There have been few studies of OC cycling in glacier systems, and questions remain regarding the abundance, provenance, and biogeochemical transformations of OC in these environments. To address these questions, the abundance and molecular characteristics of OC is investigated in three glacier systems. These systems are characterized by different thermal and hydrological regimes and have different potential OC sources. John Evans Glacier is a polythermal glacier in arctic Canada. Outre Glacier is a temperate glacier in the Coast Mountains of British Columbia, Canada. Victoria Upper Glacier is a cold-based glacier in the McMurdo Dry Valleys of Antarctica. To provide an indication of the extent to which glacier system OC dynamics are microbially mediated, microbial culturing and identification is performed and organic acid abundance and speciation is determined. Where possible, samples of supraglacial runoff, glacier ice and basal ice and subglacial meltwater were collected. The dissolved organic carbon (DOC) concentration in each sample was measured by combustion/non-dispersive infrared gas analysis. Emission and synchronous fluorescence spectroscopy were used to characterize the molecular properties of the DOC from each environment. When possible, microbial culturing and identification was performed and organic acid identification and quantification was measured by ion chromatography. DOC exists in detectable quantities (0.06-46.6 ppm) in all of the glacier systems that were investigated. The molecular characteristics of DOC vary between glaciers, between environments at the same glacier, and over time within a single environment. Viable microbes are recoverable in significant (ca

  11. [Carbon monoxide poisoning by a heating system].

    Science.gov (United States)

    Dietz, Eric; Gehl, Axel; Friedrich, Peter; Kappus, Stefan; Petter, Franz; Maurer, Klaus; Püschel, Klaus

    2016-01-01

    A case of accidental carbon monoxide poisoning in several occupants of two neighboring residential buildings in Hamburg-Harburg (Germany) caused by a defective gas central heating system is described. Because of leaks in one of the residential buildings and the directly adjacent wall of the neighboring house, the gas could spread and accumulated in both residential buildings, which resulted in a highly dangerous situation. Exposure to the toxic gas caused mild to severe intoxication in 15 persons. Three victims died still at the site of the accident. Measures to protect the occupants were taken only with a great delay. As symptoms were unspecific, it was not realized that the various alarms given by persons involved in the accident were related to the same cause. In order to take appropriate measures in time it is indispensible to recognize, assess and check potential risks, which can be done by using carbon monoxide warning devices and performing immediate COHb measurements with special pulse oximeters on site. Moreover, the COHb content in the blood should be routinely determined in all patients admitted to an emergency department with unspecific symptoms.

  12. Development of stoker-burner wood chip combustion systems for the UK market

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The document makes a case for the development of a design of wood chip stoker-burner more suited to the UK than those currently imported from Sweden and Finland. The differences would centre on market conditions, performance and cost-effectiveness and the devices would be manufactured or part-manufactured in the UK. Econergy Limited was contracted by the DTI as part of its Sustainable Energy Programmes to design and construct an operational prototype stoker-burner rated at 120 kWth. A test rig was built to: (i) study modified burner heads and (ii) develop control hardware and a control strategy. Both (i) and (ii) are described. Tests brought about an increase in performance of the burner head and its wet wood performance. It was considered that further improvements are achievable and six areas for future study were suggested.

  13. Organ and Tissue-specific Sucrose Transporters. Important Hubs in Gene and Metabolite Networks Regulating Carbon Use in Wood-forming Tissues of Populus

    Energy Technology Data Exchange (ETDEWEB)

    Harding, Scott A. [Univ. of Georgia, Athens, GA (United States); Tsai, Chung-Jui [Univ. of Georgia, Athens, GA (United States)

    2016-01-04

    The overall project objective was to probe the relationship between sucrose transporters and plant productivity in the biomass for biofuels woody perennial, Populus. At the time the proposal was written, sucrose transporters had already been investigated in many plant model systems, primarily with respect to the export of photosynthate sucrose from source leaves, and the uptake of sucrose in storage organs and seeds. Preliminary findings by the PI found that in Populus, sucrose transporter genes (SUTs) were well expressed in wood-forming tissues that comprise the feedstock for biofuels production. Because sucrose comprises by far the predominant form in which photosynthate is delivered from source organs to sink organs like roots and wood-forming tissues, SUTs control a gate that nominally at least could impact the allocation or partitioning of sucrose for potentially competing end uses like growth (stem biomass) and storage. In addition, water use might be conditioned by the way in which sucrose is distributed throughout the plant, and/or by the way in which sucrose is partitioned intracellularly. Several dozen transgenic lines were produced in year 1 of the project to perturb the expression ratio of multiple plasma membrane (PM) SUTs (intercellular trafficking), versus the single tonoplast membrane (TM) sucrose transporter that effectively regulates intracellular trafficking of sucrose. It was possible to obtain transgenic lines with dual SUT gene knockdown using the 35S promoter, but not the wood-specific TUA1 promoter. By the end of project year 2, a decision was made to work with the 35S plants while archiving the TUA1 plants. The PhD candidate charged with producing the transgenic lines abandoned the project during its second year, substantially contributing to the decision to operate with just the 35S lines. That student’s interests ranged more toward evolutionary topics, and a report on SUT gene evolution was published (Peng et al 2014).

  14. The impact of wood biochar as a soil amendment in aerobic rice systems of the Brazilian Savannah

    OpenAIRE

    CARVALHO, M. T. de M.

    2015-01-01

    Abstract Keywords: tropical Savannah, biochar, soil fertility, aerobic rice, grain yield, N2O emission Márcia Thaís de Melo Carvalho (2015). The impact of wood biochar as a soil amendment in aerobic rice systems of the Brazilian Savannah. PhD thesis, Wageningen University, The Netherlands, with summaries in English, Dutch and Portuguese,  160 pp. Rice is a staple food for 3 billion people in the world. In Brazil, rice is a traditional staple food mostly cultivated by smallh...

  15. Solar-energy-system performance-evaluation update: Wood Road School, Ballston Spa, New York, October 1982-April 1983

    Energy Technology Data Exchange (ETDEWEB)

    Kendall, P

    1983-01-01

    The Wood Road School Solar Project is a 216,000 square foot combined elementary and middle school in Ballston Spa, New York. The solar energy system supplies energy to the space heating and domestic hot water subsystems. Heat is collected by flat plate collector panels and stored in two storage tanks. Performance data are given for the system overall and for each of the four subsystems - energy collection, storage, space heating, and domestic hot water. Data are also provided on operating energy, energy savings, and weather conditions. Design and actual system solar fraction are compared, and percentage of incident solar energy and collected solar energy utilized are given. Also given are building loads analysis, system thermal losses, and system coefficient of performance. (LEW)

  16. Observing the carbon-climate system

    CERN Document Server

    Schimel, David; Moore, Berrien; Chatterjee, Abhishek; Baker, David; Berry, Joe; Bowman, Kevin; Crisp, Phillipe Ciais David; Crowell, Sean; Denning, Scott; Duren, Riley; Friedlingstein, Pierre; Gierach, Michelle; Gurney, Kevin; Hibbard, Kathy; Houghton, Richard A; Huntzinger, Deborah; Hurtt, George; Jucks, Ken; Kawa, Randy; Koster, Randy; Koven, Charles; Luo, Yiqi; Masek, Jeff; McKinley, Galen; Miller, Charles; Miller, John; Moorcroft, Paul; Nassar, Ray; ODell, Chris; Ott, Leslie; Pawson, Steven; Puma, Michael; Quaife, Tristan; Riris, Haris; Romanou, Anastasia; Rousseaux, Cecile; Schuh, Andrew; Shevliakova, Elena; Tucker, Compton; Wang, Ying Ping; Williams, Christopher; Xiao, Xiangming; Yokota, Tatsuya

    2016-01-01

    Increases in atmospheric CO2 and CH4 result from a combination of forcing from anthropogenic emissions and Earth System feedbacks that reduce or amplify the effects of those emissions on atmospheric concentrations. Despite decades of research carbon-climate feedbacks remain poorly quantified. The impact of these uncertainties on future climate are of increasing concern, especially in the wake of recent climate negotiations. Emissions, long concentrated in the developed world, are now shifting to developing countries, where the emissions inventories have larger uncertainties. The fraction of anthropogenic CO2 remaining in the atmosphere has remained remarkably constant over the last 50 years. Will this change in the future as the climate evolves? Concentrations of CH4, the 2nd most important greenhouse gas, which had apparently stabilized, have recently resumed their increase, but the exact cause for this is unknown. While greenhouse gases affect the global atmosphere, their sources and sinks are remarkably he...

  17. Porous carbons

    Indian Academy of Sciences (India)

    Carbon in dense as well as porous solid form is used in a variety of applications. Activated porous carbons are made through pyrolysis and activation of carbonaceous natural as well as synthetic precursors. Pyrolysed woods replicate the structure of original wood but as such possess very low surface areas and poor ...

  18. Wood handbook : wood as an engineering material.

    Science.gov (United States)

    Forest Products Laboratory

    1999-01-01

    Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

  19. Post-Earthquake Damage Inspection of Wood-Frame Buildings by a Polarimetric GB-SAR System

    Directory of Open Access Journals (Sweden)

    Hai Liu

    2016-11-01

    Full Text Available Structural damage inspection after an earthquake is essential for safety assessment of the affected wood-frame buildings and for making knowledgeable decision regarding their repair, renovation, or replacement. We present a polarimetric radar system for sensing the concealed wood-frames damaged by earthquakes. This system employs an antenna array consisting of four linearly polarized Vivaldi antennas recording full-polarimetric radar echoes in an ultra-wideband ranging from 1 to 20 GHz. The detailed design of the system and the signal processing algorithms for high-resolution 3D imaging are introduced. We conducted a number of surveys on damaged wooden wall specimens in laboratory. The experiment results indicate that the high-frequency radar waves can penetrate the wooden walls. Deformations of wooden structures (about 2 cm displacement inside the wall, as well as the concealed small metal nails (about 3 mm in diameter and less than 2 cm in length and bolts can be clearly imaged. The shape and orientation of the wooden members have shown a great sensitivity to the radar polarization. It is concluded that radar polarimetry can provide much richer information on the condition of concealed building structures than the conventional single-polarization subsurface penetrating radar.

  20. Electrical Properties of Carbon Fiber Support Systems

    CERN Document Server

    Cooper, W; Demarteau, M; Fast, J; Hanagaki, K; Johnson, M; Kuykendall, W; Lubatti, H; Matulik, M; Nomerotski, A; Quinn, B; Wang, J

    2005-01-01

    Carbon fiber support structures have become common elements of detector designs for high energy physics experiments. Carbon fiber has many mechanical advantages but it is also characterized by high conductivity, particularly at high frequency, with associated design issues. This paper discusses the elements required for sound electrical performance of silicon detectors employing carbon fiber support elements. Tests on carbon fiber structures are presented indicating that carbon fiber must be regarded as a conductor for the frequency region of 10 to 100 MHz. The general principles of grounding configurations involving carbon fiber structures will be discussed. To illustrate the design requirements, measurements performed with a silicon detector on a carbon fiber support structure at small radius are presented. A grounding scheme employing copper-kapton mesh circuits is described and shown to provide adequate and robust detector performance.

  1. Relationship Between Wood Color Parameters Measured by the CIELab System and Extractive and Phenol Content in Acacia mangium and Vochysia guatemalensis from Fast-Growth Plantations

    Directory of Open Access Journals (Sweden)

    Carolina Tenorio

    2012-03-01

    Full Text Available The heterogeneity of color distribution between sapwood and heartwood limits the market for wood from fast-growth plantations of tropical species. Wood color is associated with wood extractives contents. This study presents the relationship between wood color parameters measured by the CIELab color system and total amount of extractives and phenolic-type extractives in ethanol-toluene and hot water extracts of wood from two fast-growth plantation species. The results demonstrated that the difference in sapwood and hardwood color in Vochysia guatemalensis and Acacia mangium is caused by lower concentrations of extractives in sapwood of both species. Additionally, variations in total extractive and phenolic content have different effects on the color parameters (L*, a* and b* of both species studied. In Vochysia guatemalensis wood, parameter L* decreases as total extractive and phenolic content increases; however, parameter a* increases as the content of extractives and phenols increases. In Acacia mangium, the amount of phenols showed no relationship with the color parameters. The ethanol-toluene total extractive content, however, shows a relationship with several color parameters. An increase in the content of total extractives in water and ethanol-toluene increases parameter a*, but decreases parameter L*.

  2. Relationship between wood color parameters measured by the CIELab system and extractive and phenol content in Acacia mangium and Vochysia guatemalensis from fast-growth plantations.

    Science.gov (United States)

    Moya, Róger; Soto Fallas, Roy; Jiménez Bonilla, Pablo; Tenorio, Carolina

    2012-03-26

    The heterogeneity of color distribution between sapwood and heartwood limits the market for wood from fast-growth plantations of tropical species. Wood color is associated with wood extractives contents. This study presents the relationship between wood color parameters measured by the CIELab color system and total amount of extractives and phenolic-type extractives in ethanol-toluene and hot water extracts of wood from two fast-growth plantation species. The results demonstrated that the difference in sapwood and hardwood color in Vochysia guatemalensis and Acacia mangium is caused by lower concentrations of extractives in sapwood of both species. Additionally, variations in total extractive and phenolic content have different effects on the color parameters (L*, a* and b*) of both species studied. In Vochysia guatemalensis wood, parameter L* decreases as total extractive and phenolic content increases; however, parameter a* increases as the content of extractives and phenols increases. In Acacia mangium, the amount of phenols showed no relationship with the color parameters. The ethanol-toluene total extractive content, however, shows a relationship with several color parameters. An increase in the content of total extractives in water and ethanol-toluene increases parameter a*, but decreases parameter L*.

  3. The Impact of a Mild Sub-Critical Hydrothermal Carbonization Pretreatment on Umbila Wood. A Mass and Energy Balance Perspective

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Cuvilas

    2015-03-01

    Full Text Available Over the last years, the pretreatment of biomass as a source of energy has become one of the most important steps of biomass conversion. In this work the effect of a mild subcritical hydrothermal carbonization of a tropical woody biomass was studied. Results indicate considerable change in carbon content from 52.78% to 65.1%, reduction of oxygen content from 41.14% to 28.72% and ash slagging and fouling potential. Even though decarboxylation, decarbonylation and dehydration reactions take place, dehydration is the one that prevails. The mass and energy balance was affected by the treatment conditions than the severity of the treatment.

  4. Studies of wood fuel systems with raw material from young forest stands. Final report; Systemstudier ungskogsbraensle. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    Liss, J.E. [Dalarna Univ., Falun (Sweden)

    2001-12-01

    The three-year project 'Studies of wood fuel systems with raw material from young forest stands' has been carried out during the period March 1998 to February 2001. New technology for harvesting small trees has created a possibility to develop efficient wood fuel systems using raw material from young forest stands. This possibility coincides with a great demand for tending of young stands from a silvicultural point of view. The main aim of the project has been to analyse and assess wood fuel systems based on this concept. The spectrum of criteria for assessment has been broad, including productivity, profitability, safety and health aspects, employment and environmental impact. As an example of a new technology which has been developed and studied during the project period can be mentioned a new felling head which can be used for cutting and handling several trees at the same time. The weight of the felling head is only about 270 kg, which has done it possible to use it on smaller base-machines as well as larger machines. The productivity has shown to be about 150-250 trees/hour in stands with a diameter of 5-10 cm. The productivity, expressed as biomass, is about 2-3 tonnes dry substance/hour. In the design of production system, bundling of trees early in the process is considered to be especially promising. The development of such a system is ongoing, but is not at the market yet. Some experimental studies have been done on transportation, storing and chipping of such bundles with varying size and varying tree-species. The calculated cost of this system will be lower then for traditional chipping-systems, because of the higher density for the handle units. It is much easier to handle bundles than small non-bundled trees, the chipping-productivity will be high and the transportation can be done with regular timber trucks. The calculation cost for the bundle-system will be about 120-130 SEK/MWh in stands with a diameter of some 7-10 cm, which can be

  5. From Models to Measurements: Comparing Downed Dead Wood Carbon Stock Estimates in the U.S. Forest Inventory

    Science.gov (United States)

    Grant M. Domke; Christopher W. Woodall; Brian F. Walters; James E. Smith

    2013-01-01

    The inventory and monitoring of coarse woody debris (CWD) carbon (C) stocks is an essential component of any comprehensive National Greenhouse Gas Inventory (NGHGI). Due to the expense and difficulty associated with conducting field inventories of CWD pools, CWD C stocks are often modeled as a function of more commonly measured stand attributes such as live tree C...

  6. Above-ground carbon storage, downed wood, and understory plant species richness after thinning in western Oregon

    Science.gov (United States)

    Julia I. Burton; Adrian Ares; Sara E. Mulford; Deanna H. Olson; Klaus J. Puettmann

    2013-01-01

    Concerns about climate change have generated worldwide interest in managing forests for the uptake and storage of carbon (C). Simultaneously, preserving and enhancing structural, functional, and species diversity in forests remains an important objective. Therefore, understanding tradeoffs and synergies among C storage and sequestration and diversity in managed forests...

  7. Carbon Monitoring System Carbon Flux for Fire L4 V1 (CMSFluxFire) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset provides the Carbon Flux for Fires. The NASA Carbon Monitoring System (CMS) is designed to make significant contributions in characterizing,...

  8. Carbon Monitoring System Flux for Posterior Fire Carbon L4 V1 (CMSFluxFirepost) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset provides the Carbon Flux for Fires. The NASA Carbon Monitoring System (CMS) is designed to make significant contributions in characterizing,...

  9. Methane from wood

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, T. F.; Barreto, L.; Kypreos, S.; Stucki, S

    2005-07-15

    The role of wood-based energy technologies in the Swiss energy system in the long-term is examined using the energy-system Swiss MARKAL model. The Swiss MARKAL model is a 'bottom-up' energy-systems optimization model that allows a detailed representation of energy technologies. The model has been developed as a joint effort between the Energy Economics Group (EEG) at Paul Scherrer Institute PSI) and the University of Geneva and is currently used at PSI-EEG. Using the Swiss MARKAL model, this study examines the conditions under which wood-based energy technologies could play a role in the Swiss energy system, the most attractive pathways for their use and the policy measures that could support them. Given the involvement of PSI in the ECOGAS project, especial emphasis is put on the production of bio-SNG from wood via gasification and methanation of syngas and on hydrothermal gasification of woody biomass. Of specific interest as weIl is the fraction of fuel used in passenger cars that could be produced by locally harvested wood. The report is organized as follows: Section 2 presents a brief description of the MARKAL model. Section 3 describes the results of the base case scenario, which represents a plausible, 'middle-of-the-road' development of the Swiss energy system. Section 4 discusses results illustrating the conditions under which the wood-based methanation technology could become competitive in the Swiss energy market, the role of oil and gas prices, subsidies to methanation technologies and the introduction of a competing technology, namely the wood-based Fischer-Tropsch synthesis. FinaIly, section 5 outlines some conclusions from this analysis. (author)

  10. Development of Carbon Dioxide Removal Systems for Advanced Exploration Systems

    Science.gov (United States)

    Knox, James C.; Trinh, Diep; Gostowski, Rudy; King, Eric; Mattox, Emily M.; Watson, David; Thomas, John

    2012-01-01

    "NASA's Advanced Exploration Systems (AES) program is pioneering new approaches for rapidly developing prototype systems, demonstrating key capabilities, and validating operational concepts for future human missions beyond Earth orbit" (NASA 2012). These forays beyond the confines of earth's gravity will place unprecedented demands on launch systems. They must not only blast out of earth's gravity well as during the Apollo moon missions, but also launch the supplies needed to sustain a crew over longer periods for exploration missions beyond earth's moon. Thus all spacecraft systems, including those for the separation of metabolic carbon dioxide and water from a crewed vehicle, must be minimized with respect to mass, power, and volume. Emphasis is also placed on system robustness both to minimize replacement parts and ensure crew safety when a quick return to earth is not possible. Current efforts are focused on improving the current state-of-the-art systems utilizing fixed beds of sorbent pellets by seeking more robust pelletized sorbents, evaluating structured sorbents, and examining alternate bed configurations to improve system efficiency and reliability. These development efforts combine testing of sub-scale systems and multi-physics computer simulations to evaluate candidate approaches, select the best performing options, and optimize the configuration of the selected approach, which is then implemented in a full-scale integrated atmosphere revitalization test. This paper describes the carbon dioxide (CO2) removal hardware design and sorbent screening and characterization effort in support of the Atmosphere Resource Recovery and Environmental Monitoring (ARREM) project within the AES program. A companion paper discusses development of atmosphere revitalization models and simulations for this project.

  11. Wood waste in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Matos, O.; Ribeiro, R. [Biomass Centre for Energy - CBE, Miranda do Corvo (Portugal)

    1997-12-31

    The energy policy of the EC, as well as most of member states points to a sizeable increase of energy production based on renewable energy sources, wood, wood residues, agricultural residues, energy crops including SRF, organic sludges, solid residues, etc. Most recent goals indicate a desirable duplication of today`s percentage by 2010. The reasons for this interest, besides diversification of sources, less dependence on imported fuels, use of endogenous resources, expected decrease of fossil fuel reserves, use of available land, additional employment and income for rural communities, etc., are related to important environmental benefits namely in terms of emissions of hot house gases. Wood waste, resulting from forest operations, cleaning, cultural and final cuttings, and from wood based industries, constitute a special important resource by reason of quality and availability. In addition to this they do not require additional land use and the removal is beneficial. In the run-up to the becoming December`s 1997 `Climate Change Summit` in Kioto, there is mounting pressure on companies to plan on carbon cuts. (author) 6 refs., 1 tab.

  12. Ground-Water Budgets for the Wood River Valley Aquifer System, South-Central Idaho, 1995-2004

    Science.gov (United States)

    Bartolino, James R.

    2009-01-01

    The Wood River Valley contains most of the population of Blaine County and the cities of Sun Valley, Ketchum, Haley, and Bellevue. This mountain valley is underlain by the alluvial Wood River Valley aquifer system which consists of a single unconfined aquifer that underlies the entire valley, an underlying confined aquifer that is present only in the southernmost valley, and the confining unit that separates them. The entire population of the area depends on ground water for domestic supply, either from domestic or municipal-supply wells, and rapid population growth since the 1970s has caused concern about the long-term sustainability of the ground-water resource. To help address these concerns this report describes a ground-water budget developed for the Wood River Valley aquifer system for three selected time periods: average conditions for the 10-year period 1995-2004, and the single years of 1995 and 2001. The 10-year period 1995-2004 represents a range of conditions in the recent past for which measured data exist. Water years 1995 and 2001 represent the wettest and driest years, respectively, within the 10-year period based on precipitation at the Ketchum Ranger Station. Recharge or inflow to the Wood River Valley aquifer system occurs through seven main sources (from largest to smallest): infiltration from tributary canyons, streamflow loss from the Big Wood River, areal recharge from precipitation and applied irrigation water, seepage from canals and recharge pits, leakage from municipal pipes, percolation from septic systems, and subsurface inflow beneath the Big Wood River in the northern end of the valley. Total estimated mean annual inflow or recharge to the aquifer system for 1995-2004 is 270,000 acre-ft/yr (370 ft3/s). Total recharge for the wet year 1995 and the dry year 2001 is estimated to be 270,000 acre-ft/yr (370 ft3/s) and 220,000 acre-ft/yr (300 ft3/s), respectively. Discharge or outflow from the Wood River Valley aquifer system occurs through

  13. Carbonate fuel cell system with integrated carbon dioxide/thermal management

    Energy Technology Data Exchange (ETDEWEB)

    Paetsch, L.

    1995-08-01

    The objective of the present work is to define the stack design and system requirements for a commercial-scale carbonate fuel cell with an integrated carbon dioxide management system. Significant simplification and cost reduction of the system is achieved by direct transfer of the fuel exhaust to the oxidant inlet of the fuel cell, thereby eliminating the anode exhaust converter and high temperature piping utilized in conventional system designs.

  14. Reducing Students' Carbon Footprints Using Personal Carbon Footprint Management System Based on Environmental Behavioural Theory and Persuasive Technology

    Science.gov (United States)

    Lin, Shyh-ming

    2016-01-01

    This study applied environmental behavioural theories to develop a personal carbon footprint management system and used persuasive technology to implement it. The system serves as an educational system to improve the determinants of students' low-carbon behaviours, to promote low-carbon concepts and to facilitate their carbon management. To assess…

  15. Joint implementation and TA during construction of wood chip based heat supply system in Pisz, Poland. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-05-01

    This Final Report describes the project 'Wood Chip based Heat Supply System in Pisz, Poland'. Pisz is situated in the North-eastern part of Poland, in the Mazurian Lakes area. The large forests and lakes surrounding the city are heavily influenced by the air pollution, especially with the emissions of SO{sub x}, NO{sub x}, C0{sub 2}, as well as particles from the large number of coal fired boiler stations in the city of Pisz. The State Forest Districts in the area inform that the forests are experiencing health problems, which may be attributed to reduced biodiversity. The supply of heat to the citizens of Pisz was previously covered by 55 coal fired heating stations together with the big local Plywood factory 'Plywood', which produced heat for the district heating system in Pisz from a 11,2 MW coal fired HOB plant. The City Council of Pisz decided to convert from coal to utilisation of the large local wood resources in the heat production and by this reduce the heavy pollution in the area. A Heat Supply Plan according to the Polish Energy Law was prepared in 1999. The Heat Plan describes several alternatives of supplying Pisz with biomass heat. In December 2000 COWI finalised a feasibility study analysing several options for the future heat supply in Pisz. The main conclusion of the feasibility study was to establish a new wood chips fired heating plant for the replacement of both a large number of coal fired heating stations and the heat supply from 'Plywood'. Since the heat supply plan was prepared, the Municipality of Pisz has decided to be independent from the Plywood Factory. Therefore it has been decided to build the new wood chips HOB plant on a Municipality owned site in the eastern part of the city, where the heat supply today is covered by individual oil fired boiler stations. The district heating supply area is hereby additionally extended by also replacing the individual boiler stations in this area. The 26th September

  16. Carbon Monitoring System Flux for Ocean Carbon L4 V1 (CMSFluxOcean) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — This dataset provides the Carbon Flux for Ocean Carbon. The NASA Carbon Monitoring System (CMS) is designed to make significant contributions in characterizing,...

  17. Wood as an adherend

    Science.gov (United States)

    Bryan H. River; Charles B. Vick; Robert H. Gillespie

    1991-01-01

    Wood is a porous, permeable, hygroscopic, orthotropic, biological composite material of extreme chemical diversity and physical intricacy. Table 1.1 provides an overview of the may variables, including wood variables, that bear on the bonding and performance of wood in wood joints and wood-based materials. Of particular note is the fact that wood properties vary...

  18. Low-carbon benefit analysis on DG penetration distribution system

    National Research Council Canada - National Science Library

    GE, Shaoyun; XU, Li; LIU, Hong; FANG, Jian

    2015-01-01

    .... This paper proposes a pseudo-sequential Monte Carlo simulation method for the low-carbon benefit evaluation of distribution system including distributed wind turbines, solar array and battery energy storage systems...

  19. The UV signature of carbon in the solar system

    Science.gov (United States)

    Hendrix, Amanda R.; Vilas, Faith; Li, Jian-Yang

    2016-01-01

    Carbon compounds are ubiquitous in the solar system but are challenging to study using remote sensing due to the mostly bland spectral nature of these species in the traditional visible-near-infrared regime. In contrast, carbonaceous species are spectrally active in the ultraviolet (UV) but have largely not been considered for studies of solar system surfaces. We compile existing UV data of carbon compounds—well-studied in contemplation of the ISM extinction "bump"—to review trends in UV spectral behavior. Thermal and/or irradiation processing of carbon species results in the loss of H and ultimately graphitization. Graphitization is shown to produce distinct spectral features in the UV, which are predicted to be more readily detected in the inner solar system, whereas outer solar system bodies are expected to be more dominated by less-processed carbon compounds. Throughout the solar system, we can thus consider a "carbon continuum" where the more evolved carbons in the inner solar system exhibit a stronger UV absorption feature and associated far-UV rise. We compare carbon spectral models with spacecraft data of two bodies from different points in the carbon continuum, Ceres and Iapetus. We find that the apparent strong far-UV upturn in Ceres' spectrum (in the 150-200 nm range) can be explained by an anthracite-like species while Iapetus' spectrum features a reflectance peak consistent with polycyclic aromatic hydrocarbons. We make generalized predictions for UV spectral characteristics in other regions of the solar system.

  20. Wood Availability

    NARCIS (Netherlands)

    Schelhaas, M.; Layos Mayr, Marian

    2017-01-01

    Estimation of the amount of wood that could potentially be harvested in a country can be accomplished using several approaches. A simple indicator is the balance between annual fellings and Net Annual Increment. However, this indicator does not take into account the actual age-class distribution of

  1. A supercritical oxidation system for the determination of carbon isotope ratios in marine dissolved organic carbon

    NARCIS (Netherlands)

    Le Clercq, Martijn; Van der Plicht, Johannes; Meijer, Harro A.J.

    1998-01-01

    An analytical oxidation system employing supercritical oxidation has been developed. It is designed to measure concentration and the natural carbon isotope ratios (C-13, C-14) Of dissolved organic carbon (DOC) and is especially suited for marine samples. The oxidation takes place in a ceramic tube

  2. Modeling carbon emissions from urban traffic system using mobile monitoring.

    Science.gov (United States)

    Sun, Daniel Jian; Zhang, Ying; Xue, Rui; Zhang, Yi

    2017-12-01

    Comprehensive analyses of urban traffic carbon emissions are critical in achieving low-carbon transportation. This paper started from the architecture design of a carbon emission mobile monitoring system using multiple sets of equipment and collected the corresponding data about traffic flow, meteorological conditions, vehicular carbon emissions and driving characteristics on typical roads in Shanghai and Wuxi, Jiangsu province. Based on these data, the emission model MOVES was calibrated and used with various sensitivity and correlation evaluation indices to analyze the traffic carbon emissions at microscopic, mesoscopic and macroscopic levels, respectively. The major factors that influence urban traffic carbon emissions were investigated, so that emission factors of CO, CO2 and HC were calculated by taking representative passenger cars as a case study. As a result, the urban traffic carbon emissions were assessed quantitatively, and the total amounts of CO, CO2 and HC emission from passenger cars in Shanghai were estimated as 76.95kt, 8271.91kt, and 2.13kt, respectively. Arterial roads were found as the primary line source, accounting for 50.49% carbon emissions. In additional to the overall major factors identified, the mobile monitoring system and carbon emission quantification method proposed in this study are of rather guiding significance for the further urban low-carbon transportation development. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Carbon-Carbon Composites as Recuperator Material for Direct Gas Brayton Systems

    Energy Technology Data Exchange (ETDEWEB)

    RA Wolf

    2006-07-19

    Of the numerous energy conversion options available for a space nuclear power plant (SNPP), one that shows promise in attaining reliable operation and high efficiency is the direct gas Brayton (GB) system. In order to increase efficiency, the GB system incorporates a recuperator that accounts for nearly half the weight of the energy conversion system (ECS). Therefore, development of a recuperator that is lighter and provides better performance than current heat exchangers could prove to be advantageous. The feasibility of a carbon-carbon (C/C) composite recuperator core has been assessed and a mass savings of 60% and volume penalty of 20% were projected. The excellent thermal properties, high-temperature capabilities, and low density of carbon-carbon materials make them attractive in the GB system, but development issues such as material compatibility with other structural materials in the system, such as refractory metals and superalloys, permeability, corrosion, joining, and fabrication must be addressed.

  4. Carbon and fullerene nanomaterials in plant system.

    Science.gov (United States)

    Husen, Azamal; Siddiqi, Khwaja Salahuddin

    2014-04-25

    Both the functionalized and non functionalized carbon nanomaterials influence fruit and crop production in edible plants and vegetables. The fullerene, C60 and carbon nanotubes have been shown to increase the water retaining capacity, biomass and fruit yield in plants up to ~118% which is a remarkable achievement of nanotechnology in recent years. The fullerene treated bitter melon seeds also increase the phytomedicine contents such as cucurbitacin-B (74%), lycopene (82%), charantin (20%) and insulin (91%). Since as little as 50 μg mL-1 of carbon nanotubes increase the tomato production by about 200%, they may be exploited to enhance the agriculture production in future. It has been observed that, in certain cases, non functionalized multi-wall carbon nanotubes are toxic to both plants and animals but the toxicity can be drastically reduced if they are functionalized.

  5. Carbon and fullerene nanomaterials in plant system

    Science.gov (United States)

    2014-01-01

    Both the functionalized and non functionalized carbon nanomaterials influence fruit and crop production in edible plants and vegetables. The fullerene, C60 and carbon nanotubes have been shown to increase the water retaining capacity, biomass and fruit yield in plants up to ~118% which is a remarkable achievement of nanotechnology in recent years. The fullerene treated bitter melon seeds also increase the phytomedicine contents such as cucurbitacin-B (74%), lycopene (82%), charantin (20%) and insulin (91%). Since as little as 50 μg mL−1 of carbon nanotubes increase the tomato production by about 200%, they may be exploited to enhance the agriculture production in future. It has been observed that, in certain cases, non functionalized multi-wall carbon nanotubes are toxic to both plants and animals but the toxicity can be drastically reduced if they are functionalized. PMID:24766786

  6. SiC/C composites prepared from wood-based carbons by pulse current sintering with SiO2 : Electrical and thermal properties

    NARCIS (Netherlands)

    Fujisawa, M; Hata, T; Bronsveld, P; Castro, [No Value; Tanaka, F; Kikuchi, H; Furuno, T; Imamura, Y

    2004-01-01

    A powder mix of wood charcoal and SiO2 was sintered into a SiC/C composite. The heat treatment temperatures were 1400-1800 degreesC, the SiO2 concentration 0, 10, 30 and 50 wt.% with respect to the dry weight of wood charcoal. The microstructure, electrical resistance and thermal conductivity were

  7. Current systematic carbon-cycle observations and the need for implementing a policy-relevant carbon observing system

    Science.gov (United States)

    P. Ciais; A. J. Dolman; A. Bombelli; R. Duren; A. Peregon; P. J. Rayner; C. Miller; N. Gobron; G. Kinderman; G. Marland; N. Gruber; F. Chevallier; R. J. Andres; G. Balsamo; L. Bopp; F.-M. Bréon; G. Broquet; R. Dargaville; T. J. Battin; A. Borges; H. Bovensmann; M. Buchwitz; J. Butler; J. G. Canadell; R. B. Cook; R. DeFries; R. Engelen; K. R. Gurney; C. Heinze; M. Heimann; A. Held; M. Henry; B. Law; S. Luyssaert; J. Miller; T. Moriyama; C. Moulin; R. B. Myneni; C. Nussli; M. Obersteiner; D. Ojima; Y. Pan; J.-D. Paris; S. L. Piao; B. Poulter; S. Plummer; S. Quegan; P. Raymond; M. Reichstein; L. Rivier; C. Sabine; D. Schimel; O. Tarasova; R. Valentini; R. Wang; G. van der Werf; D. Wickland; M. Williams; C. Zehner

    2014-01-01

    A globally integrated carbon observation and analysis system is needed to improve the fundamental understanding of the global carbon cycle, to improve our ability to project future changes, and to verify the effectiveness of policies aiming to reduce greenhouse gas emissions and increase carbon sequestration. Building an integrated carbon observation system requires...

  8. Residential combustion venting failure. A systems approach. Final technical report. Project 5: Remedial measures for wood-burning fireplaces

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This report is a review of remedial measures available for avoiding or correcting combustion venting problems in wood-burning fireplaces and included on account of field tests of airtight doors with direct air supply and of a fireplace spillage advisor. It appeared that properly designed, truly airtight doors are effective in isolating fireplaces from the house indoor pressure regime and that this remedial measure does not affect the fire safety of the fireplace. It was also found that the detection of smoke particles was effective when the fire was hot and flaming, but not during the smoldering stage of the fire; on the other hand, the detection of carbon monoxide was not effective during the hot and flaming stage, but was effective during the smoldering stage. It is, therefore, necessary, for a fireplace spillage advisor to incorporate both technologies. The design and optimum location of a fireplace spillage advisor are discussed. A list of fires due to burning solid fuel in British Columbia during the year of 1985 in given, together with their assumed causes. 6 figs., 2 tabs.

  9. Incineration of water pollutants with activated char from coal, wood, or crop residues in a system designed to produce energy and pyrolysis by-product chemicals. Final Technical completion report (Final)

    Energy Technology Data Exchange (ETDEWEB)

    Manahan, S.E.; Gale, R.W.; Laquer, F.C.; Smith, K.E.; Bornhop, D.J.

    1982-11-18

    A wastewater-treatment system, particularly useful for treating chemical leachates, was developed on a laboratory scale. Subbituminous coal, 20-60-mesh, was pyrolyzed. A synthetic wastewater containing 3520 ppm total organic carbon was contacted with nonactivated char, char activated in water-saturated nitrogen at 850/sup 0/C, and coal ash. During a contact time of 0.5 hour, organic removals from the wastewater were 13.3% by nonactivated char, 38.8% by activated char, and 46.5% by ash. For a contact time of 72 hours, organic removals were about 25% for nonactivated char, 58.8% for activated char, and 53.4% for ash. This treatment system is applicable where large amounts of waste carbonaceous material (coal, wood, crop residues) are available. The spent char can be incinerated. Heat from incineration can be used in the pyrolysis step, and the coal ash can be recycled to the water-purification step.

  10. Air quality and residential wood combustion - application of the model system SIMAIRrwc for some Swedish municipalities; Luftkvalitet och smaaskalig biobraensleeldning. Tillaempningar av SIMAIRved foer naagra kommuner

    Energy Technology Data Exchange (ETDEWEB)

    Omstedt, Gunnar; Andersson, Stefan; Johansson, Christer; Loefgren, Bengt-Erik

    2008-11-15

    SIMAIRrwc is a Web based evaluation tool for meeting the EU directive on air pollution limits in residential areas using wood combustion. The background is a four-year research program (2001-2004) called Biomass Combustion Health and Environment. Some conclusions from this program were that emissions from small scale wood combustion can influence human health mainly due to high emitting old wood stoves during cold weather conditions and that the air quality in such areas can improve significantly if old wood stoves were replaced by modern wood boilers attached to a storage tank or with a pellet boiler. SIMAIRrwc is based on the same principles as SIMAIRroad, which is a Web based evaluation tool for road traffic i.e. coupled model system using different models on local, urban and regional geographical scales, best available emission data, but at the same time presented in a very simplified way. In this project SIMAIRrwc has been applied in five different Swedish municipalities. The aim has been to apply and improve the model in cooperation with the municipalities. The conclusions from the project are: Small scale wood combustions in residential areas are local problems which sometimes include only a few houses and/or wood-burners. Air quality problems related to the EU directive are mainly due to particles. Combinations of residential areas with wood combustion and emissions from nearby dense traffic roads might give rise to bad air quality. Actions require knowledge about individual equipment which needs information from the local chimney sweeps. The best way to identify problem areas is to use model calculations. If model calculations indicate risks of exceeding air quality limits, then new calculations should be made with improved input data taking into account for example information of district heating or other installations that can effect the emissions. Before actions are taken it may also be useful to make measurements. The measurement site can then be

  11. Comment on 'Carbon and fullerene nanomaterials in plant system'.

    Science.gov (United States)

    Dasgupta-Schubert, N; Tiwari, D K; Villaseñor Cendejas, L M

    2016-04-12

    A recent review article entitled "Carbon and fullerene nanomaterials in plant system" published in this journal, misinterprets a component of our (published) work on the interactions of carbon nanotubes with plants. In this comment, we provide the rationale to counter this misconstruction.

  12. Wood construction codes issues in the United States

    Science.gov (United States)

    Douglas R. Rammer

    2006-01-01

    The current wood construction codes find their origin in the 1935 Wood Handbook: Wood as an Engineering Material published by the USDA Forest Service. Many of the current design recommendations can be traced back to statements from this book. Since this time a series of development both historical and recent has led to a multi-layered system for use of wood products in...

  13. Force of habit: shrubs, trees and contingent evolution of wood anatomical diversity using Croton (Euphorbiaceae) as a model system.

    Science.gov (United States)

    Arévalo, Rafael; van Ee, Benjamin W; Riina, Ricarda; Berry, Paul E; Wiedenhoeft, Alex C

    2017-03-01

    Wood is a major innovation of land plants, and is usually a central component of the body plan for two major plant habits: shrubs and trees. Wood anatomical syndromes vary between shrubs and trees, but no prior work has explicitly evaluated the contingent evolution of wood anatomical diversity in the context of these plant habits. Phylogenetic comparative methods were used to test for contingent evolution of habit, habitat and wood anatomy in the mega-diverse genus Croton (Euphorbiaceae), across the largest and most complete molecular phylogeny of the genus to date. Plant habit and habitat are highly correlated, but most wood anatomical features correlate more strongly with habit. The ancestral Croton was reconstructed as a tree, the wood of which is inferred to have absent or indistinct growth rings, confluent-like axial parenchyma, procumbent ray cells and disjunctive ray parenchyma cell walls. The taxa sampled showed multiple independent origins of the shrub habit in Croton , and this habit shift is contingent on several wood anatomical features (e.g. similar vessel-ray pits, thick fibre walls, perforated ray cells). The only wood anatomical trait correlated with habitat and not habit was the presence of helical thickenings in the vessel elements of mesic Croton . Plant functional traits, individually or in suites, are responses to multiple and often confounding contexts in evolution. By establishing an explicit contingent evolutionary framework, the interplay between habit, habitat and wood anatomical diversity was dissected in the genus Croton . Both habit and habitat influence the evolution of wood anatomical characters, and conversely, the wood anatomy of lineages can affect shifts in plant habit and habitat. This study hypothesizes novel putatively functional trait associations in woody plant structure that could be further tested in a variety of other taxa.

  14. Estimating carbon fluxes in a Posidonia oceanica system: Paradox of the bacterial carbon demand

    Science.gov (United States)

    Velimirov, B.; Lejeune, P.; Kirschner, A.; Jousseaume, M.; Abadie, A.; Pête, D.; Dauby, P.; Richir, J.; Gobert, S.

    2016-03-01

    A mass balance ecosystemic approach, based on bacterial carbon demands and primary production data, was used to investigate if the bacterial community (freewater bacterioplankton and benthic bacteria of the oxygenated sediment layer) could be sustained by the main primary producers (Posidonia oceanica and its epiphytes, adjacent macroalgae and phytoplankton communities; hereafter called the P. oceanica system) of a non-eutrophic Mediterranean bay. Unexpectedly, the findings of this study differed from previous works that used benthic incubation chamber and O2 optode methods. In this study, data were grouped in two categories, corresponding to two time periods, according to the seawater temperature regime (18 °C): from May to October and from November to April. Between May and October, the produced benthic macrophyte tissues could not provide the carbon required by the bacteria of the oxygenated sediment layer, showing that the balance production of the investigated bay was clearly heterotrophic (i.e. negative) during this time period. In contrast, between November and April, benthic bacteria respiration nearly equated to carbon production. When integrating the open water carbon dynamics above the meadow in the model, a negative carbon balance was still observed between May and October, while a slight carbon excess was noticed between November and April. In the light of these findings, the carbon balance being negative on an annual basis, alternative carbon sources are required for the maintenance of the bacterial carbon production.

  15. Significance of wood extractives for wood bonding.

    Science.gov (United States)

    Roffael, Edmone

    2016-02-01

    Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

  16. Treatment of Copper Contaminated Municipal Wastewater by Using UASB Reactor and Sand-Chemically Carbonized Rubber Wood Sawdust Column

    National Research Council Canada - National Science Library

    Biswas, Swarup; Mishra, Umesh

    2016-01-01

    .... The laboratory scale UASB reactor and column system were observed for a period of 121 days. After the posttreatment column the average removal of monitoring parameters such as copper ion concentration (91.37...

  17. Hypervelocity impact resistance of reinforced carbon carbon/carbon foam thermal protection systems

    Science.gov (United States)

    Grujicic, M.; Pandurangan, B.; Zhao, C. L.; Biggers, S. B.; Morgan, D. R.

    2006-05-01

    Common aero vehicles (CAVs) are aerodynamically designed, (from orbit) re-entry, un-powered military vehicles planned to be used for deployment of the desired munitions with increased accuracy and range. In one of the currently considered designs of the CAVs, their outer skin is planned to be constructed from two-ply panels. The outer play is made of a carbon-carbon composite while the inner ply is constructed from a carbon-based foam. In the present work a transient non-linear-dynamics-based analysis is carried out in order to predict the extent of damage and the probability for failure of the carbon-carbon/carbon-foam CAV panels during potential hypervelocity impact of space debris with the outer surface of the CAVs. The results obtained show that the extent of damage scales with the normal component of the momentum associated with the debris particles just before the impact. In addition, it is found that despite its relatively low strength, the carbon-foam can provide a major increase in the resistance of the CAV panels towards penetration of the hypervelocity debris particles. This finding has been linked with an attendant consolidation of the foam, the process that is capable of absorbing a substantial amount of kinetic energy carried by the debris particles.

  18. Microbial associations in gut systems of wood- and bark-inhabiting longhorned beetles [Coleoptera: Cerambycidae].

    Science.gov (United States)

    Grünwald, S; Pilhofer, M; Höll, W

    2010-01-01

    Using fluorescence in situ hybridization (FISH) techniques and PCR-based rDNA sequencing, gut microflora in the larvae of bark- and wood-inhabiting cerambycid beetles (Rhagium inquisitor, Tetropium castaneum, Plagionotus arcuatus and Leptura rubra [Coleoptera: Cerambycidae]) was investigated. A total of 12 novel ascomycetous yeast strains were isolated from the gut content. Panfungal and strain-specific oligonucleotide probes identified two yeast strains as Candida rhagii and Candida shehatae, which were colonizing specialized organs (mycetomes) adhering to the gut of R. inquisitor and L. rubra larvae, respectively. Fragments containing these organisms were constantly being released from the mycetomes into the gut lumen. Whereas the mycetome symbiont of T. castaneum could not be identified, all larvae of this species harbored an additional bacterial endocytobiont in their gut epithelium. This novel gammaproteobacterium belonged to the Sodalis clade of insect symbionts, which includes the secondary endosymbiont of tsetse flies (Sodalis glossinidius) and the Sitophilus oryzae primary endosymbiont (SOPE). Extracellular gut flora of the investigated cerambycid larvae was comprised of Alpha-, Beta-, and Gammaproteobacteria, Actinobacteria, Firmicutes, Verrucomicrobia and Acidobacteria. However, the individual composition among investigated larvae was highly variable and supposedly depended on individual host nutrition. Copyright (c) 2009 Elsevier GmbH. All rights reserved.

  19. Miniature Carbon Dioxide Sensor for Small Unmanned Aircraft Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Phase 1 has seen the development of a revolutionary new type of sensor for making carbon dioxide (CO2) measurements from small Unmanned Aircraft Systems (UAS) and...

  20. Age-dependent radial increases in wood specific gravity of tropical pioneers in Costa Rica

    Science.gov (United States)

    Bruce G. Williamson; Michael C. Wiemann

    2010-01-01

    Wood specific gravity is the single best descriptor of wood functional properties and tree life-history traits, and it is the most important variable in estimating carbon stocks in forests. Tropical pioneer trees produce wood of increasing specific gravity across the trunk radius as they grow in stature. Here, we tested whether radial increases in wood specific gravity...

  1. Environmental determinants of the old oaks in wood-pastures from a changing traditional social-ecological system of Romania.

    Science.gov (United States)

    Moga, Cosmin Ioan; Samoilă, Ciprian; Öllerer, Kinga; Băncilă, Raluca I; Réti, Kinga-Olga; Craioveanu, Cristina; Poszet, Szilárd; Rákosy, László; Hartel, Tibor

    2016-05-01

    Large, old trees are keystone ecological structures, their decline having disproportional ecological consequences. There is virtually no information available regarding the status and occurrence of old trees in traditional cultural landscapes from Eastern Europe. In this study, we explore the environmental determinants of the old oaks found in wood-pastures from a changing traditional rural landscape from Central Romania. Both the old oaks and the wood-pastures harboring them have exceptional cultural, historical, and ecological values, yet are vulnerable to land-use change. We surveyed 41 wood-pastures from Southern Transylvania and counted the old oaks in them. We then related the number of old oaks from these wood-pastures to a set of local and landscape level variables related to wood-pastures. We found 490 old oaks in 25 wood-pastures. The number of old oaks was positively related to the size of the wood-pasture and the amount of pasture and forest around it (500 m buffer), and negatively related to the proximity of the village. Furthermore, we found a significant interaction between the effects of sheepfolds in the wood-pasture and the size of the wood-pasture on the number of old trees, indicating a negative influence of sheepfolds on the number of old trees in smaller sized wood-pastures. There is an increasing risk for losing old trees in the traditional cultural landscapes due to the lack of formal recognition of these trees. Therefore, while presenting the positive example of local initiatives and citizen science, we argue for an urgent development and implementation of conservation policies along with education strategies targeting the old trees and rural communities from the changing traditional cultural landscapes of Eastern Europe.

  2. Energy wood. Part 2b: Wood pellets and pellet space-heating systems; Holzenergie Teil 2b: Holzpellets und Pelletheizungen / Energie du bois Partie 2b: Granules de bois et installations de chauffage a granules de bois

    Energy Technology Data Exchange (ETDEWEB)

    Nussbaumer, T. [Verenum, Zuerich (Switzerland)

    2002-07-01

    The paper gives an overview on pellet utilization including all relevant process steps: Potential and properties of saw dust as raw material, pellet production with drying and pelletizing, standardization of wood pellets, storage and handling of pellets, combustion of wood pellets in stoves and boilers and applications for residential heating. In comparison to other wood fuels, wood pellets show several advantages: Low water content and high heating value, high energy density, and homogeneous properties thus enabling stationary combustion conditions. However, quality control is needed to ensure constant properties of the pellets and to avoid the utilization of contaminated raw materials for the pellet production. Typical data of efficiencies and emissions of pellet stoves and boilers are given and a life cycle analysis (LCA) of wood pellets in comparison to log wood and wood chips is described. The LCA shows that wood pellets are advantageous thanks to relatively low emissions. Hence, the utilization of wood pellet is proposed as a complementary technology to the combustion of wood chips and log wood. Finally, typical fuel cost of wood pellets in Switzerland are given and compared with light fuel oil. (author)

  3. Wood ash. A potential forest fertilizer

    Energy Technology Data Exchange (ETDEWEB)

    Kuokkanen, M.; Kuokkanen, T. (Univ. of Oulu, Dept. of Chemistry (Finland)). email: toivo,kuokkanen@oulu.fi; Poeykioe, R. (City of Kemi (Finland)); Nurmesniemi, H. (Stora Enso Oyj, Veitsiluoto Mill, Kemi (Finland))

    2009-07-01

    The enhancement of wood-derived energy plays an important role in the Finnish energy and climate strategies. The use of new and upgraded biomass fuels, e.g. pellets and briquettes, has become more common in recent years, especially fuel pellets which are well suited for home heating applications. Although electrical and district heating are still the most popular heating systems in news detached and row houses in Finland, stoves and fireplaces which burn biomass fuels, e.g. logs, pellets and briquettes, are commonly used as a secondary heating system. It has been estimated that about 100 000 wood fired heating systems are currently in operation in Finland. Thousands of small-scale boilers are sold annually, and about 30% of the wood heating systems are fuelled by wood chips or pellets. Compared to traditional firewood, pellets provide possibilities for automation and optimization in the same way as for oil, with high combustion efficiency and small combustion residues. In addition, wood pellets can be stored and traded at the regional, national and international level. These features, combined with the other advantages such as environmental benefits (i.e. CO{sub 2} neutral fuel), low moisture content and bulk density (i.e. 0.28 bulk-m3 of wood pellets is equivalent to 1 bulk-m3 of wood chips), as well as a relatively high heating (i.e. calorific) value (about 17 MJ/kg), which allows long-distance transport without affecting the energy balance make wood pellets attractive in many countries from both the demand and the supply side of the market. Wood ash usually contains mineral plant nutrients, especially base cations (e.g. Ca, Mg, K), and has a strongly alkaline pH. For this reason, it would be ecologically beneficial if the ash that contains plant nutrients could be returned back to the forest ecosystem. This would save primary resources and can be seen as an example of the sustainable use of biomass. The purpose of this study was to determine the physical and

  4. Carbon footprint calculation model for the Mexican food equivalent system

    Directory of Open Access Journals (Sweden)

    Salvador Ruiz Cerrillo

    2017-06-01

    Full Text Available Introduction: the impact environment trough the anthropogenic action has been contributed to the fast production of greenhouse gases effect (GHG, a way to estimate the quantity of these substances is the carbon footprint (CF, nowadays it does not exist enough models for the calculation of food carbon footprint. Objective: the aim of this study was to design a calculation model for the measurement of the carbon footprint on the Mexican food equivalent system. Methods: it was about a retrospective study, a bibliographic review was made with original and review articles in different specialized researchers, there were included publications in English and Spanish, also published from 2000 to 2016. Results: a reference table was proposed for the food carbon footprint calculation on the Mexican food equivalent system trough the carbon intensity indicator, which is determined by the grams of emissions equivalents of carbon dioxide (CO2 in relation with the energetic contribution of each food equivalent. Conclusion: in a conclusion manner, estimating food carbon footprint is still a challenge, mean while the calculation models proposal is important to estimate the production of GHG trough a more sustainable food system.

  5. Application of least squares support vector regression and linear multiple regression for modeling removal of methyl orange onto tin oxide nanoparticles loaded on activated carbon and activated carbon prepared from Pistacia atlantica wood.

    Science.gov (United States)

    Ghaedi, M; Rahimi, Mahmoud Reza; Ghaedi, A M; Tyagi, Inderjeet; Agarwal, Shilpi; Gupta, Vinod Kumar

    2016-01-01

    Two novel and eco friendly adsorbents namely tin oxide nanoparticles loaded on activated carbon (SnO2-NP-AC) and activated carbon prepared from wood tree Pistacia atlantica (AC-PAW) were used for the rapid removal and fast adsorption of methyl orange (MO) from the aqueous phase. The dependency of MO removal with various adsorption influential parameters was well modeled and optimized using multiple linear regressions (MLR) and least squares support vector regression (LSSVR). The optimal parameters for the LSSVR model were found based on γ value of 0.76 and σ(2) of 0.15. For testing the data set, the mean square error (MSE) values of 0.0010 and the coefficient of determination (R(2)) values of 0.976 were obtained for LSSVR model, and the MSE value of 0.0037 and the R(2) value of 0.897 were obtained for the MLR model. The adsorption equilibrium and kinetic data was found to be well fitted and in good agreement with Langmuir isotherm model and second-order equation and intra-particle diffusion models respectively. The small amount of the proposed SnO2-NP-AC and AC-PAW (0.015 g and 0.08 g) is applicable for successful rapid removal of methyl orange (>95%). The maximum adsorption capacity for SnO2-NP-AC and AC-PAW was 250 mg g(-1) and 125 mg g(-1) respectively. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. JPL Activated Carbon Treatment System (ACTS) for sewage

    Science.gov (United States)

    1976-01-01

    An Activated Carbon Treatment System (ACTS) was developed for sewage treatment and is being applied to a one-million gallon per day sewage treatment pilot plant in Orange County California. Activities reported include pyrolysis and activation of carbon-sewage sludge, and activated carbon treatment of sewage to meet ocean discharge standards. The ACTS Sewage treatment operations include carbon-sewage treatment, primary and secondary clarifiers, gravity (multi-media) filter, filter press dewatering, flash drying of carbon-sewage filter cake, and sludge pyrolysis and activation. Tests were conducted on a laboratory scale, 10,000 gallon per day demonstration plant and pilot test equipment. Preliminary economic studies are favorable to the ACTS process relative to activated sludge treatment for a 175,000,000 gallon per day sewage treatment plant.

  7. Fabrication of 3D Carbon Microelectromechanical Systems (C-MEMS).

    Science.gov (United States)

    Pramanick, Bidhan; Martinez-Chapa, Sergio O; Madou, Marc; Hwang, Hyundoo

    2017-06-17

    A wide range of carbon sources are available in nature, with a variety of micro-/nanostructure configurations. Here, a novel technique to fabricate long and hollow glassy carbon microfibers derived from human hairs is introduced. The long and hollow carbon structures were made by the pyrolysis of human hair at 900 °C in a N2 atmosphere. The morphology and chemical composition of natural and pyrolyzed human hairs were investigated using scanning electron microscopy (SEM) and electron-dispersive X-ray spectroscopy (EDX), respectively, to estimate the physical and chemical changes due to pyrolysis. Raman spectroscopy was used to confirm the glassy nature of the carbon microstructures. Pyrolyzed hair carbon was introduced to modify screen-printed carbon electrodes ; the modified electrodes were then applied to the electrochemical sensing of dopamine and ascorbic acid. Sensing performance of the modified sensors was improved as compared to the unmodified sensors. To obtain the desired carbon structure design, carbon micro-/nanoelectromechanical system (C-MEMS/C-NEMS) technology was developed. The most common C-MEMS/C-NEMS fabrication process consists of two steps: (i) the patterning of a carbon-rich base material, such as a photosensitive polymer, using photolithography; and (ii) carbonization through the pyrolysis of the patterned polymer in an oxygen-free environment. The C-MEMS/NEMS process has been widely used to develop microelectronic devices for various applications, including in micro-batteries, supercapacitors, glucose sensors, gas sensors, fuel cells, and triboelectric nanogenerators. Here, recent developments of a high-aspect ratio solid and hollow carbon microstructures with SU8 photoresists are discussed. The structural shrinkage during pyrolysis was investigated using confocal microscopy and SEM. Raman spectroscopy was used to confirm the crystallinity of the structure, and the atomic percentage of the elements present in the material before and after

  8. Impact of wood pellets export on the development of their production in Serbia with the effects of substituting enegry from fossil fuels and reduction of carbon dioxide emission

    Directory of Open Access Journals (Sweden)

    Glavonjić Branko

    2016-01-01

    Full Text Available The paper presents the results of researching the impact of export on the production of wood pellets as well as the situation on the market for this wood fuel in Serbia. Objective of the research was to produce scientifically and professionally founded conclusions and the related adequate recommendations to the decision makers in order to improve the situation on wood pellets market in Serbia and eliminate the existing problems which significantly burden and slow down this development. Special objective of the research was to observe the contributions of wood pellets to the mitigation of climate changes using Serbia as the example. Results of the conducted research show that the expansion of the consumption (demand increase in the European Union countries in the last fifteen years and the related increase of export from Serbia are the most significant factors which have influenced the development of wood pellets production in Serbia. Parameters of econometric model of the impact of export on the increase of production show that production increase of 1.17% can be expected with the increase of export of 1%. Thus, the number of wood pellet producers has rapidly increased in the last ten years, from 2 producers in 2006 to 52 active producers in 2016. Increase of the number of producers was also accompanied by the increase of the installed capacities. At the end of 2015, total installed capacities for wood pellet production in Serbia reached 550 thousand tons, and the realized production was 229 thousand tons, or 41.6% of the installed capacity. Consumption of wood pellets in Serbia in the last four years achieved significant increase and reached the level of 89 thousand tons in 2015. However, concerning the segment of wood pellets consumption in Serbia, the situation is still unsatisfactory despite the fact that the consumption has been increasing year after year. Average price of 1 kWh of energy from wood pellets exported from Serbia was in the

  9. Carbon and energy balances for a range of biofuels options

    Energy Technology Data Exchange (ETDEWEB)

    Elsayed, M.A.; Matthews, R.; Mortimer, N.D.

    2003-03-01

    This is the final report of a project to produce a set of baseline energy and carbon balances for a range of electricity, heat and transport fuel production systems based on biomass feedstocks. A list of 18 important biofuel technologies in the UK was selected for study of their energy and carbon balances in a consistent approach. Existing studies on these biofuel options were reviewed and their main features identified in terms of energy input, greenhouse gas emissions (carbon dioxide, methane, nitrous oxide and total), transparency and relevance. Flow charts were produced to represent the key stages of the production of biomass and its conversion to biofuels. Outputs from the study included primary energy input per delivered energy output, carbon dioxide outputs per delivered energy output, methane output per delivered energy output, nitrous oxide output per delivered energy output and total greenhouse gas requirements. The net calorific value of the biofuel is given where relevant. Biofuels studied included: biodiesel from oilseed rape and recycled vegetable oil; combined heat and power (CHP) by combustion of wood chip from forestry residues; CHP by gasification of wood chip from short rotation coppice; electricity from the combustion of miscanthus, straw, wood chip from forestry residues and wood chip from short rotation coppice; electricity from gasification of wood chip from forestry residues and wood chip from short rotation coppice; electricity by pyrolysis of wood chip from forestry residues and wood chip from short rotation coppice; ethanol from lignocellulosics, sugar beet and wheat; heat (small scale) from combustion of wood chip from forestry residues and wood chip from short rotation coppice; and rapeseed oil from oilseed rape.

  10. Termites amplify effects of wood traits on decomposition rates among multiple bamboo and dicot woody species

    NARCIS (Netherlands)

    Liu, Guofang; Cornwell, W.K.; Cao, Kunfang; Hu, Yukun; van Logtestijn, R.S.P; Yang, Shijian; Xie, Xiufang; Zhang, Yalin; Ye, Duo; Pan, Xu; Ye, Xuehua; Huang, Zhenying; Dong, Ming; Cornelissen, J.H.C.

    2015-01-01

    Wood decomposition is a key process in the terrestrial carbon cycle, controlling carbon storage with feedback to climate. In (sub) tropical forest, termites are major players in wood decomposition, but their role relative to that of microbial decomposers and wood traits of different tree species is

  11. Evaluation of a wood chipping system for eucalyptus tops for energy; Avaliacao de um sistema de cavaqueamento de ponteiras de eucalipto para aproveitamento energetico

    Energy Technology Data Exchange (ETDEWEB)

    Canto, Juliana Lorensi do [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Machado, Carlos Cardoso; Souza, Amaury Paulo de; Sant' Anna, Cleverson de Mello [Departamento de Engenharia Florestal da Universidade Federal de Vicosa, UFV, MG (Brazil)], E-mails: machado@ufv.br, amaury@ufv.br, cleverson@ufv.br; Seixas, Fernando [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz, ESALQ], E-mail: fseixas@esalq.usp.br

    2011-11-15

    The objective of this study was to evaluate the performance and to estimate costs of a wood chipping system for tree tops, which are considered residuals from wood harvesting, to be used for energy. The study was developed in a forest industry in the Para State, located in the north region of Brazil. The system was comprised by one wood chipper, two forwarders and one front loader. Data collection was based on time study, fuel consumption and chips load weighting. System average productivity was 17.51 tonnes per effective hour. Machine utilization rate was 51.9% due to many delays, mainly for repair and maintenance of the chipper. Chips transportation was considered to be the critical point of the system, due to some lack of trucks available for blowing chips. The system can produce between 94 and 162 times more energy than the energy consumed. System cost per effective hour was R$ 376.56, which means R$ 21.51/tonne of chips or R$ 2.70/G J. (author)

  12. Short Communication: Soil carbon pools in different pasture systems

    Energy Technology Data Exchange (ETDEWEB)

    Cardozo, F.M. Jr.; Carneiro, R.F.V.; Leite, L.F.C.; Araujo, A.S.F.

    2016-11-01

    The aim of this study was to assess the carbon pools of a tropical soil where the native forest was replaced with different pasture systems. We studied five pasture production systems, including four monoculture systems with forage grasses such as Andropogon, Brachiaria, Panicum, and Cynodon, and an agroforestry system as well as a native vegetation plot. Greater availability of fulvic acid was detected in the agroforestry system as compared with that in the other systems. Higher lability of C was detected in the Andropogon system during the dry and rainy seasons and during the dry season in Cynodon. During the dry season, all pastures systems showed deficits in the net removal of atmospheric CO2. The structure and practices of the agroforestry system enables more carbon to be sequestered in the soil as compared with the monoculture pasture, suggesting that it is an important practice to mitigate climatic change and to improve soil quality. (Author)

  13. Cooperative water network system to reduce carbon footprint.

    Science.gov (United States)

    Lim, Seong-Rin; Park, Jong Moon

    2008-08-15

    Much effort has been made in reducing the carbon footprint to mitigate climate change. However, water network synthesis has been focused on reducing the consumption and cost of freshwater within each industrial plant. The objective of this study is to illustrate the necessity of the cooperation of industrial plants to reduce the total carbon footprint of their water supply systems. A mathematical optimization model to minimize global warming potentials is developed to synthesize (1) a cooperative water network system (WNS) integrated over two plants and (2) an individual WNS consisting of two WNSs separated for each plant. The cooperative WNS is compared to the individual WNS. The cooperation reduces their carbon footprint and is economically feasible and profitable. A strategy for implementing the cooperation is suggested for the fair distribution of costs and benefits. As a consequence, industrial plants should cooperate with their neighbor plants to further reduce the carbon footprint.

  14. Determinants of demand for wood products in the US construction sector: an econometric analysis of a system of demand equations

    National Research Council Canada - National Science Library

    Haim, David; Adams, Darius M; White, Eric

    2014-01-01

    ... using a detailed annual time series database that spans the period from 1950 to 2009. Results suggest large variability in own-price long-term demand elasticity among wood inputs and across end uses...

  15. Consequential Implications of Municipal Energy System on City Carbon Footprints

    Directory of Open Access Journals (Sweden)

    Jani Laine

    2017-10-01

    Full Text Available Climate change mitigation is an important goal for cities globally. Energy production contributes more than half of the global greenhouse gas emissions, and thus the mitigation potential of local municipal energy systems is important for cities to recognize. The purpose of the study is to analyze the role of local municipal energy systems in the consumption-based carbon footprint of a city resident. The research supplements the previous carbon footprint assessments of city residents with an energy system implication analysis. The study includes 20 of the largest cities in Finland. The main findings of the study are as follows: first, the municipal combined heat and power energy system contributes surprisingly little (on average 18% to the direct carbon footprint of city residents, supporting some previous findings about a high degree of outsourcing of emissions in cities in developed countries. Second, when indirect emissions (i.e., the implication of a municipal energy system on the national energy system are allocated to city residents, the significance of the local energy system increases substantially to 32%. Finally, without the benefits of local combined heat and power technology based electricity consumption, the carbon footprints would have increased by an additional 13% to 47% due to the emissions from compensatory electricity production. The results also show that the direct application of consumption-based carbon assessment would imply a relatively low significance for municipal energy solutions. However, with a broader understanding of energy system dynamics, the significance of municipal energy increases substantially. The results emphasize the importance of the consequential energy system implications, which is typically left out of the evaluations of consumption-based carbon footprints.

  16. 21 CFR 862.1160 - Bicarbonate/carbon dioxide test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bicarbonate/carbon dioxide test system. 862.1160... Systems § 862.1160 Bicarbonate/carbon dioxide test system. (a) Identification. A bicarbonate/carbon dioxide test system is a device intended to measure bicarbonate/carbon dioxide in plasma, serum, and whole...

  17. 21 CFR 862.3220 - Carbon monoxide test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Carbon monoxide test system. 862.3220 Section 862.3220 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Toxicology Test Systems § 862...

  18. Kinetic investigation of wood pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Thurner, F.; Mann, U.; Beck, S. R.

    1980-06-01

    The objective of this investigation was to determine the kinetics of the primary reactions of wood pyrolysis. A new experimental method was developed which enabled us to measure the rate of gas, tar, and char production while taking into account the temperature variations during the wood heating up. The experimental method developed did not require any sophisticated instruments. It facilitated the collection of gas, tar and residue (unreacted wood and char) as well as accurate measurement of the temperature inside the wood sample. Expressions relating the kinetic parameters to the measured variables were derived. The pyrolysis kinetics was investigated in the range of 300 to 400/sup 0/C at atmospheric pressure and under nitrogen atmosphere. Reaction temperature and mass fractions of gas, tar, and residue were measured as a function of time. Assuming first-order reactions, the kinetic parameters were determined using differential method. The measured activation energies of wood pyrolysis to gas, tar, and char were 88.6, 112.7, and 106.5 kJ/mole, respectively. These kinetic data were then used to predict the yield of the various pyrolysis products. It was found that the best prediction was obtained when an integral-mean temperature obtained from the temperature-time curve was used as reaction temperature. The pyrolysis products were analyzed to investigate the influence of the pyrolysis conditions on the composition. The gas consisted mainly of carbon dioxide, carbon monoxide, oxygen, and C/sub 3//sup +/-compounds. The gas composition depended on reaction time as well as reactor temperature. The tar analysis indicated that the tar consisted of about seven compounds. Its major compound was believed to be levoglucosan. Elemental analysis for the char showed that the carbon content increased with increasing temperature.

  19. Particulate and gaseous emissions from different wood fuels during combustion in a small-scale biomass heating system

    Science.gov (United States)

    Olave, R. J.; Forbes, E. G. A.; Johnston, C. R.; Relf, J.

    2017-05-01

    Woodchip is widely used as fuel in dedicated biomass and, even in some conventional energy generation plants. However, there are concerns about atmospheric air pollution from flue gases emitted during wood biomass combustion, particularly oxides of nitrogen (NOx) and particulates Renewable Heat Incentive (RHI), has been introduced. Qualifying criteria for this scheme have included limits for flue gas emissions of NOX and PM10 of 150 and 30 g per gigajoule (g/GJ) of energy input, respectively. In an experiment, three locally available types of Willow (Salix spp) and one of Sitka spruce (Picea sitchensis) woodchips, showed significant differences in physical and chemical constituents, gaseous and particulate emissions. During combustion in a 120 kW biomass system, air flows, flue gas temperatures and energy output correlated with gaseous emissions, NOx with raw fuel ash, nitrogen, phosphorus and potassium content, as did all flue gas particulate fractions. PM10 ranged from 30.3 to 105.7 g/GJ and NOx from 91.2 to 174.3 g/GJ. Sitka spruce produced significantly lower emissions of PM10 and NOx (27.5 and 52.6% less, respectively) than the three willow fuels, from which emissions were above the RHI emissions limits.

  20. Design study for wood gasifier/engine test project

    Energy Technology Data Exchange (ETDEWEB)

    Bircher, K.G.; Sutherland, R.P.

    1982-03-01

    This report investigates various aspects of coupling wood gasifiers with engine/generators for commercial use (size greater than 1.0 MWe). A brief review of current available gas cleaning and cooling equipment and low heating value engines is presented. Accelerated research into dry methods of scrubbing wood gas will assist greatly in making commercial gasifier/engine combinations a viable alternative. Process design of a gas cleaning system for an 800 kW/sub e/ generator, includes heat and mass balances and instrumentation requirements. A testing program for the gasifier-gas cleaning unit-engine/generator system is outlined. The benfits and drawbacks of upgrading the calorific value of the producer gas by both carbon dioxide removal and oxygen addition are discussed briefly. 10 refs., 10 figs., 12 tabs.

  1. Optimization of a flexible multi-generation system based on wood chip gasification and methanol production

    DEFF Research Database (Denmark)

    Lythcke-Jørgensen, Christoffer Ernst; Clausen, Lasse Røngaard; Algren, Loui

    2017-01-01

    Flexible multi-generation systems (FMGs) consist of integrated and flexibly operated facilities that providemultiple links between the different sectors of the energy system. The present study treated the design optimization of a conceptual FMG which integrated a methanol-producing biorefinery wi...

  2. Wood Composite Adhesives

    Science.gov (United States)

    Gomez-Bueso, Jose; Haupt, Robert

    The global environment, in which phenolic resins are being used for wood composite manufacture, has changed significantly during the last decade. This chapter reviews trends that are driving the use and consumption of phenolic resins around the world. The review begins with recent data on volume usage and regional trends, followed by an analysis of factors affecting global markets. In a section on environmental factors, the impact of recent formaldehyde emission regulations is discussed. The section on economics introduces wood composite production as it relates to the available adhesive systems, with special emphasis on the technical requirement to improve phenolic reactivity. Advances in composite process technology are introduced, especially in regard to the increased demands the improvements place upon adhesive system performance. The specific requirements for the various wood composite families are considered in the context of adhesive performance needs. The results of research into current chemistries are discussed, with a review of recent findings regarding the mechanisms of phenolic condensation and acceleration. Also, the work regarding alternate natural materials, such as carbohydrates, lignins, tannins, and proteinaceous materials, is presented. Finally, new developments in alternative adhesive technologies are reported.

  3. An Integrated, Observation-based System to Monitor Aboveground Forest Carbon Dynamics in Washington, Oregon, and California

    Science.gov (United States)

    Kennedy, R. E.; Hughes, J.; Neeti, N.; Yang, Z.; Gregory, M.; Roberts, H.; Kane, V. R.; Powell, S. L.; Ohmann, J.

    2016-12-01

    Because carbon pools and fluxes on wooded landscapes are constrained by their type, age and health, understanding the causes and consequences of carbon change requires frequent observation of forest condition and of disturbance, mortality, and growth processes. As part of USDA and NASA funded efforts, we built empirical monitoring system that integrates time-series Landsat imagery, Forest Inventory and Analysis (FIA) plot data, small-footprint lidar data, and aerial photos to characterize key carbon dynamics in forested ecosystems of Washington, Oregon and California. Here we report yearly biomass estimates for every forested 30 by 30m pixel in the states of Washington, Oregon, and California from 1990 to 2010, including spatially explicit estimates of uncertainty in our yearly predictions. Total biomass at the ecoregion scale agrees well with estimates from FIA plot data alone, currently the only method for reliable monitoring in the forests of the region. Comparisons with estimates of biomass modeled from four small-footprint lidar acquisitions in overlapping portions of our study area show general patterns of agreement between the two types of estimation, but also reveal some disparities in spatial pattern potentially attributable to age and vegetation condition. Using machine-learning techniques based on both Landsat image time series and high resolution aerial photos, we then modeled the agent causing change in biomass for every change event in the region, and report the relative distribution of carbon loss attributable to natural disturbances (primarily fire and insect-related mortality) versus anthropogenic causes (forest management and development).

  4. Wood chip moisture on-line measurement system based on the combination of the different methods; Yhdistelmaemittaus hakkeen kosteuden on-line-maeaeritykseen

    Energy Technology Data Exchange (ETDEWEB)

    Jaervinen, T. (VTT Technical Research Centre of Finland, Jyvaeskylae (Finland)); Malinen, J.; Hietala, E. (VTT Technical Research Centre of Finland, Oulu (Finland)); Teppola, T.; Siikanen, S. (VTT Technical Research Centre of Finland, Kuopio (Finland)); Tiitta, M. (Kuopio Univ. (Finland))

    2008-07-01

    The aim of the project is to develop wood chip moisture on-line measurement system based on the combination of different methods. The gauges utilised are nir-, impedance- and radiometric devices. All the measurements are installed in PDU-scale conveyor facility, which is targeted for development and testing fuel and bulk material quality and property measurement technology and devices. The system enables to achieve accurate reference moisture content data and sufficient range of moisture content variation in full scale. The usability and accuracy of the separate measurement methods have been researched by testing in different conditions. As a result it will be suggested the best combination of different methods for each purpose. The actual system will be realised in a separate new project under plan. The combination should have good usability and it should be able to apply to the different types of wood chip like wood chips for pulping and logging residue chips and even to other biomass materials in variable conditions. (orig.)

  5. Soil carbon sequestration in a Mediterranean agroforestry system

    OpenAIRE

    Cardinael, R.; Chevallier, T.; Barthès, B.; DUPRAZ, C.; Chenu, C.

    2014-01-01

    Presentation The Earth’s soils are a large reservoir of carbon (C), containing about 1500 Pg C, which represents two to three times the C contained in the atmosphere. This reservoir is extremely sensitive to land use and can act as a source or as a sink of atmospheric CO2. Agroforestry systems are expected to sequester C into both above and belowground biomass. Such systems could also increase soil organic carbon (SOC) stocks due to higher organic inputs including leaf litter, pruning resi...

  6. Wood Energy Potential in Northwestern South Carolina

    Science.gov (United States)

    James W. McMinn

    1986-01-01

    The quantity of unused wood in an Ill-county area in northwestern South Carolina was projected to be more than 16 million tons annually. Wood that is unsuitable for products other than fuel amounts to nearly 9 million tons annually.The most likely energy demand by industrial plants that are good candidates for wood fuel systems is 1.5 million tons annually.Maximum...

  7. Least cost supply strategies for wood chips

    DEFF Research Database (Denmark)

    Möller, Bernd

    The abstract presents a study based on a geographical information system, which produce  cost-supply curves by location for forest woods chips in Denmark.......The abstract presents a study based on a geographical information system, which produce  cost-supply curves by location for forest woods chips in Denmark....

  8. An advanced extruder-feeder biomass liquefaction reactor system

    Science.gov (United States)

    White, Don H.; Wolf, D.; Davenport, G.; Mathews, S.; Porter, M.; Zhao, Y.

    1987-11-01

    A unique method of pumping concentrated, viscous biomass slurries that are characteristic of biomass direct liquefaction systems was developed. A modified single-screw extruder was shown to be capable of pumping solid slurries as high as 60 weight percent wood flour in wood oil derived vacuum bottoms, as compared to only 10 to 20 weight percent wood flour in wood oil in conventional systems. During the period August, 1985 to April, 1987, a total of 18 experimental continuous biomass liquefaction runs were made using white birch feedstock. Good operability with feed rates up to 30 lb/hr covering a range of carbon monoxide, sodium carbonate catalyst, pressures from 800 to 3000 psi and temperatures from 350 C to 430 C was achieved. Crude wood oils containing 6 to 10 weight percent residual oxygen were obtained. Other wood oil characteristics are reported.

  9. Understanding Carbon Sequestration Options in the United States: Capabilities of a Carbon Management Geographic Information System

    Energy Technology Data Exchange (ETDEWEB)

    Dahowski, Robert T.; Dooley, James J.; Brown, Daryl R.; Mizoguchi, Akiyoshi; Shiozaki, Mai

    2001-04-03

    While one can discuss various sequestration options at a national or global level, the actual carbon management approach is highly site specific. In response to the need for a better understanding of carbon management options, Battelle in collaboration with Mitsubishi Corporation, has developed a state-of-the-art Geographic Information System (GIS) focused on carbon capture and sequestration opportunities in the United States. The GIS system contains information (e.g., fuel type, location, vintage, ownership, rated capacity) on all fossil-fired generation capacity in the Untied States with a rated capacity of at least 100 MW. There are also data on other CO2 sources (i.e., natural domes, gas processing plants, etc.) and associated pipelines currently serving enhanced oil recovery (EOR) projects. Data on current and prospective CO2 EOR projects include location, operator, reservoir and oil characteristics, production, and CO2 source. The system also contains information on priority deep saline aquifers and coal bed methane basins with potential for sequestering CO2. The GIS application not only enables data storage, flexible map making, and visualization capabilities, but also facilitates the spatial analyses required to solve complex linking of CO2 sources with appropriate and cost-effective sinks. A variety of screening criteria (spatial, geophysical, and economic) can be employed to identify sources and sinks most likely amenable to deployment of carbon capture and sequestration systems. The system is easily updateable, allowing it to stay on the leading edge of capture and sequestration technology as well as the ever-changing business landscape. Our paper and presentation will describe the development of this GIS and demonstrate its uses for carbon management analysis.

  10. Discontinuous and Continuous Indoor Air Quality Monitoring in Homes with Fireplaces or Wood Stoves as Heating System.

    Science.gov (United States)

    de Gennaro, Gianluigi; Dambruoso, Paolo Rosario; Di Gilio, Alessia; Di Palma, Valerio; Marzocca, Annalisa; Tutino, Maria

    2015-12-24

    Around 50% of the world's population, particularly in developing countries, uses biomass as one of the most common fuels. Biomass combustion releases a considerable amount of various incomplete combustion products, including particulate matter (PM) and polycyclic aromatic hydrocarbons (PAHs). The paper presents the results of Indoor Air Quality (IAQ) measurements in six houses equipped with wood burning stoves or fireplaces as heating systems. The houses were monitored for 48-h periods in order to collect PM10 samples and measure PAH concentrations. The average, the maximum and the lowest values of the 12-h PM10 concentration were 68.6 μg/m³, 350.7 μg/m³ and 16.8 μg/m³ respectively. The average benzo[a]pyrene 12-h concentration was 9.4 ng/m³, while the maximum and the minimum values were 24.0 ng/m³ and 1.5 ng/m³, respectively. Continuous monitoring of PM10, PAHs, Ultra Fine Particle (UFP) and Total Volatile Organic Compounds (TVOC) was performed in order to study the progress of pollution phenomena due to biomass burning, their trends and contributions to IAQ. The results show a great heterogeneity of impacts on IAQ in terms of magnitude and behavior of the considered pollutants' concentrations. This variability is determined by not only different combustion technologies or biomass quality, but overall by different ignition mode, feeding and flame management, which can also be different for the same house. Moreover, room dimensions and ventilation were significant factors for pollution dispersion. The increase of PM10, UFP and PAH concentrations, during lighting, was always detected and relevant. Continuous monitoring allowed singling out contributions of other domestic sources of considered pollutants such as cooking and cigarettes. Cooking contribution produced an impact on IAQ in same cases higher than that of the biomass heating system.

  11. Discontinuous and Continuous Indoor Air Quality Monitoring in Homes with Fireplaces or Wood Stoves as Heating System

    Directory of Open Access Journals (Sweden)

    Gianluigi de Gennaro

    2015-12-01

    Full Text Available Around 50% of the world’s population, particularly in developing countries, uses biomass as one of the most common fuels. Biomass combustion releases a considerable amount of various incomplete combustion products, including particulate matter (PM and polycyclic aromatic hydrocarbons (PAHs. The paper presents the results of Indoor Air Quality (IAQ measurements in six houses equipped with wood burning stoves or fireplaces as heating systems. The houses were monitored for 48-h periods in order to collect PM10 samples and measure PAH concentrations. The average, the maximum and the lowest values of the 12-h PM10 concentration were 68.6 μg/m3, 350.7 μg/m3 and 16.8 μg/m3 respectively. The average benzo[a]pyrene 12-h concentration was 9.4 ng/m3, while the maximum and the minimum values were 24.0 ng/m3 and 1.5 ng/m3, respectively. Continuous monitoring of PM10, PAHs, Ultra Fine Particle (UFP and Total Volatile Organic Compounds (TVOC was performed in order to study the progress of pollution phenomena due to biomass burning, their trends and contributions to IAQ. The results show a great heterogeneity of impacts on IAQ in terms of magnitude and behavior of the considered pollutants’ concentrations. This variability is determined by not only different combustion technologies or biomass quality, but overall by different ignition mode, feeding and flame management, which can also be different for the same house. Moreover, room dimensions and ventilation were significant factors for pollution dispersion. The increase of PM10, UFP and PAH concentrations, during lighting, was always detected and relevant. Continuous monitoring allowed singling out contributions of other domestic sources of considered pollutants such as cooking and cigarettes. Cooking contribution produced an impact on IAQ in same cases higher than that of the biomass heating system.

  12. Electronic Structure of Low-Dimensional Carbon Π-Systems

    DEFF Research Database (Denmark)

    García Lastra, Juan Maria; Boukahil, Idris; Qiao, Ruimin

    2016-01-01

    X-ray absorption spectroscopy (XAS) is combined with density functional theory (DFT) to determine the orbitals of one- and two-dimensional carbon Π-systems (lycopene, beta-carotene, retinal, retinol, retinoic acid, coronene, triphenylene). Considerable fine structure is observed for the transitio......-bonded carbon structures with low-dimensional character, such as those used in molecular complexes for solar cells, confined graphene structures, and molecular wires.......X-ray absorption spectroscopy (XAS) is combined with density functional theory (DFT) to determine the orbitals of one- and two-dimensional carbon Π-systems (lycopene, beta-carotene, retinal, retinol, retinoic acid, coronene, triphenylene). Considerable fine structure is observed for the transition...

  13. Hybrid system of unbonded post-tensioned CLT panels and light-frame wood shear walls

    Science.gov (United States)

    T. Ho; T. Dao; S. Aaleti; J. van de Lindt; Douglas Rammer

    2016-01-01

    Cross-laminated timber (CLT) is a relatively new type of massive timber system that has shown to possess excellent mechanical properties and structural behavior in building construction. When post-tensioned with high-strength tendons, CLT panels perform well under cyclic loadings because of two key characteristics: their rocking behavior and self-centering capacity....

  14. Dynamic dielectric properties of a wood liquefaction system using polyethylene glycol and glycerol

    Science.gov (United States)

    Mengchao Zhou; Thomas L. Eberhardt; Bo Cai; Chung-Yun Hse; Hui Pan

    2017-01-01

    Microwave-assisted liquefaction has shown potential for rapid thermal processing of lignocellulosic biomass. The efficiency of microwave heating depends largely on the dielectric properties of the materials being heated. The objective of this study was to investigate the dynamic interactions between microwave energy and the reaction system during the liquefaction of a...

  15. Identifying and locating surface defects in wood: Part of an automated lumber processing system

    Science.gov (United States)

    Richard W. Conners; Charles W. McMillin; Kingyao Lin; Ramon E. Vasquez-Espinosa

    1983-01-01

    Continued increases in the cost of materials and labor make it imperative for furniture manufacturers to control costs by improved yield and increased productivity. This paper describes an Automated Lumber Processing System (ALPS) that employs computer tomography, optical scanning technology, the calculation of an optimum cutting strategy, and 1 computer-driven laser...

  16. Carbon footprint of dairy production systems

    Science.gov (United States)

    Greenhouse gas (GHG) emissions and their potential impact on global warming has become an important national and international concern. Dairy production systems along with all other types of animal agriculture are recognized as a source of GHG. Although little information exists on the net GHG emiss...

  17. integrated vertical photobioreactor system for carbon dioxide

    African Journals Online (AJOL)

    Astri Nugroho

    2013-07-02

    Jul 2, 2013 ... the solubility of CO2 in the culture medium. From this measurement, the capability. (efficacy) of the photobioreactor microalgae cultivation system as a ... the specific growth rate (μ) defined as "an increase in the mass of cells in culture per unit time per unit mass of cells." Specific growth rate (μ, h-1) of ...

  18. Fruit production and branching density affect shoot and whole-tree wood to leaf biomass ratio in olive.

    Science.gov (United States)

    Rosati, Adolfo; Paoletti, Andrea; Al Hariri, Raeed; Famiani, Franco

    2018-02-14

    The amount of shoot stem (i.e., woody part of the shoot) dry matter per unit shoot leaf dry matter (i.e., the shoot wood to leaf biomass ratio) has been reported to be lower in short shoots than in long ones, and this is related to the greater and earlier ability of short shoots to export carbon. This is important in fruit trees, since the greater and earlier carbon export ability of shoots with a lower wood to leaf biomass ratio improves fruit production. This ratio may vary with cultivars, training systems or plant age, but no study has previously investigated the possible effect of fruit production. In this study on two olive cultivars (i.e., Arbequina, with low growth rate, and Frantoio, with high growth rate) subject to different fruit production treatments, we found that at increasing fruit production, shoot length and shoot wood to leaf biomass ratio were proportionally reduced in the new shoots growing at the same time as the fruit. Specifically, fruit production proportionally reduced total new-shoot biomass, length, leaf area and average shoot length. With decreasing shoot length, shoot diameter, stem mass, internode length, individual leaf area and shoot wood to leaf biomass ratio also decreased. This may be viewed as a plant strategy to better support fruit growth in the current year, given the greater and earlier ability of short shoots to export carbon. Moreover, at the whole-tree level, the percentage of total tree biomass production invested in leaves was closely correlated with branching density, which differed significantly across cultivars. By branching more, Arbequina concentrates more shoots (thus leaves) per unit of wood (trunk, branches and root) mass, decreasing wood to leaf biomass ratio at the whole-tree level. Therefore, while, at the shoot level, shoot length determines shoot wood to leaf biomass ratio, at the canopy level branching density is also an important determinant of whole-tree wood to leaf biomass ratio. Whole-tree wood to leaf

  19. The impact of recycling of organic carbon on the stable carbon isotopic composition of dissolved inorganic carbon in a stratified marine system (Kyllaren fjord, Norway)

    NARCIS (Netherlands)

    Breugel, Y. van; Schouten, S.; Paetzel, M.; Nordeide, R.; Sinninghe Damsté, J.S.

    2005-01-01

    A negative carbon isotope shift in sedimentary organic carbon deposited in stratified marine and lacustrine systems has often been inferred to be a consequence of the process of recycling of respired and, therefore, 13C-depleted, dissolved inorganic carbon (DIC) formed from mineralization of

  20. A Multi-omics Approach to Understand the Microbial Transformation of Lignocellulosic Materials in the Digestive System of the Wood-Feeding Beetle Odontotaenius disjunctus

    Science.gov (United States)

    Ceja Navarro, J. A.; Karaoz, U.; White, R. A., III; Lipton, M. S.; Adkins, J.; Mayali, X.; Blackwell, M.; Pett-Ridge, J.; Brodie, E.; Hao, Z.

    2015-12-01

    Odontotaenius disjuctus is a wood feeding beetle that processes large amounts of hardwoods and plays an important role in forest carbon cycling. In its gut, plant material is transformed into simple molecules by sequential processing during passage through the insect's digestive system. In this study, we used multiple 'omics approaches to analyze the distribution of microbial communities and their specific functions in lignocellulose deconstruction within the insect's gut. Fosmid clones were selected and sequenced from a pool of clones based on their expression of plant polymer degrading enzymes, allowing the identification of a wide range of carbohydrate degrading enzymes. Comparison of metagenomes of all gut regions demonstrated the distribution of genes across the beetle gut. Cellulose, starch, and xylan degradation genes were particularly abundant in the midgut and posterior hindgut. Genes involved in hydrogenotrophic production of methane and nitrogenases were more abundant in the anterior hindgut. Assembled contigs were binned into 127 putative genomes representing Bacteria, Archaea, Fungi and Nematodes. Eleven complete genomes were reconstructed allowing to identify linked functions/traits, including organisms with cellulosomes, and a combined potential for cellulose, xylan and starch hydrolysis and nitrogen fixation. A metaproteomic study was conducted to test the expression of the pathways identified in the metagenomic study. Preliminary analyses suggest enrichment of pathways related to hemicellulosic degradation. A complete xylan degradation pathway was reconstructed and GC-MS/MS based metabolomics identified xylobiose and xylose as major metabolite pools. To relate microbial identify to function in the beetle gut, Chip-SIP isotope tracing was conducted with RNA extracted from beetles fed 13C-cellulose. Multiple 13C enriched bacterial groups were detected, mainly in the midgut. Our multi-omics approach has allowed us to characterize the contribution of

  1. Carbon microelectromechanical systems (C-MEMS) based microsupercapacitors

    KAUST Repository

    Agrawal, Richa

    2015-05-18

    The rapid development in miniaturized electronic devices has led to an ever increasing demand for high-performance rechargeable micropower scources. Microsupercapacitors in particular have gained much attention in recent years owing to their ability to provide high pulse power while maintaining long cycle lives. Carbon microelectromechanical systems (C-MEMS) is a powerful approach to fabricate high aspect ratio carbon microelectrode arrays, which has been proved to hold great promise as a platform for energy storage. C-MEMS is a versatile technique to create carbon structures by pyrolyzing a patterned photoresist. Furthermore, different active materials can be loaded onto these microelectrode platforms for further enhancement of the electrochemical performance of the C-MEMS platform. In this article, different techniques and methods in order to enhance C-MEMS based various electrochemical capacitor systems have been discussed, including electrochemical activation of C-MEMS structures for miniaturized supercapacitor applications, integration of carbon nanostructures like carbon nanotubes onto C-MEMS structures and also integration of pseudocapacitive materials such as polypyrrole onto C-MEMS structures. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  2. Carbon microelectromechanical systems (C-MEMS) based microsupercapacitors

    Science.gov (United States)

    Agrawal, Richa; Beidaghi, Majid; Chen, Wei; Wang, Chunlei

    2015-05-01

    The rapid development in miniaturized electronic devices has led to an ever increasing demand for high-performance rechargeable micropower scources. Microsupercapacitors in particular have gained much attention in recent years owing to their ability to provide high pulse power while maintaining long cycle lives. Carbon microelectromechanical systems (C-MEMS) is a powerful approach to fabricate high aspect ratio carbon microelectrode arrays, which has been proved to hold great promise as a platform for energy storage. C-MEMS is a versatile technique to create carbon structures by pyrolyzing a patterned photoresist. Furthermore, different active materials can be loaded onto these microelectrode platforms for further enhancement of the electrochemical performance of the C-MEMS platform. In this article, different techniques and methods in order to enhance C-MEMS based various electrochemical capacitor systems have been discussed, including electrochemical activation of C-MEMS structures for miniaturized supercapacitor applications, integration of carbon nanostructures like carbon nanotubes onto C-MEMS structures and also integration of pseudocapacitive materials such as polypyrrole onto C-MEMS structures.

  3. Climate effects of wood used for bioenergy

    Energy Technology Data Exchange (ETDEWEB)

    Ros, Jan P.M.; Van Minnen, Jelle G. [Netherlands Environmental Assessment Agency PBL, Bilthoven (Netherlands); Arets, Eric J.M.M. [Alterra, Wageningen University WUR, Wageningen (Netherlands)

    2013-08-15

    Wood growth and natural decay both take time, and this is an important aspect of sustainability assessments of wood used for energy. Wood taken from forests is a carbon-neutral energy source in the long term, but there are many examples of potential sources of wood used for bioenergy for which net emission reductions are not achieved in 10 to 40 years - the time frame for most climate policy mitigation targets. This is caused by two factors. The first factor relates to the fact that the carbon cycles of wood have a long time span. After final felling, CO2 fixation rates are initially relatively low, but increase again as forests regrow. This regrowth takes many years, sometimes more than a century. Wood residues can either be used or left in the forest. By using them, the emissions from the otherwise decaying residues (taking 2 to 30 years) would be avoided. The second factor concerns the fact that, if the wood is used for bioenergy, then fossil energy emissions are being avoided. However, the direct emission levels from bioenergy are higher than those related to the fossil energy it replaces. These additional emissions also have to be compensated. The carbon debt caused by both factors has to be paid back first, before actual emission reductions can be realised. For wood residues (from harvesting or thinning) that are used to replace coal or oil products, these payback times are relatively short, of the order of 5 to 25 years, mainly depending on location and type of residue (longer if they replace gas). This is also the case when using wood from salvage logging. In most cases, when using wood from final felling directly for energy production, payback times could be many decades to more than a century, with substantial increases in net CO2 emissions, in the meantime. This is especially the case for many forests in Europe, because they are currently an effective carbon sink. Additional felling reduces average growth rates in these forests and thus the sequestration

  4. Soil organic carbon assessments in cropping systems using isotopic techniques

    Science.gov (United States)

    Martín De Dios Herrero, Juan; Cruz Colazo, Juan; Guzman, María Laura; Saenz, Claudio; Sager, Ricardo; Sakadevan, Karuppan

    2016-04-01

    Introduction of improved farming practices are important to address the challenges of agricultural production, food security, climate change and resource use efficiency. The integration of livestock with crops provides many benefits including: (1) resource conservation, (2) ecosystem services, (3) soil quality improvements, and (4) risk reduction through diversification of enterprises. Integrated crop livestock systems (ICLS) with the combination of no-tillage and pastures are useful practices to enhance soil organic carbon (SOC) compared with continuous cropping systems (CCS). In this study, the SOC and its fractions in two cropping systems namely (1) ICLS, and (2) CCS were evaluated in Southern Santa Fe Province in Argentina, and the use of delta carbon-13 technique and soil physical fractionation were evaluated to identify sources of SOC in these systems. Two farms inside the same soil cartographic unit and landscape position in the region were compared. The ICLS farm produces lucerne (Medicago sativa Merrill) and oat (Avena sativa L.) grazed by cattle alternatively with grain summer crops sequence of soybean (Glicine max L.) and corn (Zea mays L.), and the farm under continuous cropping system (CCS) produces soybean and corn in a continuous sequence. The soil in the area is predominantly a Typic Hapludoll. Soil samples from 0-5 and 0-20 cm depths (n=4) after the harvest of grain crops were collected in each system and analyzed for total organic carbon (SOC, 0-2000 μm), particulate organic carbon (POC, 50-100 μm) and mineral organic carbon (MOC, <50 μm). Delta carbon-13 was determined by isotopic ratio mass spectrometry. In addition, a site with natural vegetation (reference site, REF) was also sampled for delta carbon-13 determination. ANOVA and Tukey statistical analysis were carried out for all data. The SOC was higher in ICLS than in CCS at both depths (20.8 vs 17.7 g kg-1 for 0-5 cm and 16.1 vs 12.7 g kg-1 at 0-20 cm, respectively, P<0.05). MOC was

  5. Low-Carbon Economic Dispatching for Power Grid Integrated with Carbon Capture Power Plants and Wind Power System

    Directory of Open Access Journals (Sweden)

    Sheng Siqing

    2015-01-01

    Full Text Available Carbon emission characteristics of all kinds of power units are analyzed against the background of the low carbon economy. This paper introduces carbon trading in the dispatching model, gives full consideration to the benefit or cost of carbon emission and introduces carbon emission in the dispatching model as a decision variable so as to achieve the unity of the economy and the environmental protection of the dispatching model. A low carbon economic dispatching model is established based on multiple objectives, such as the lowest thermal power generation cost, the lowest carbon trading cost and the lowest carbon capture power plant operation cost. Load equalization, output constraint of power unit, ramping constraint, spinning reserve constraint and carbon capture efficiency constraint should be taken into account in terms of constraint conditions. The model is solved by the particle swarm optimization based on dynamic exchange and density distance. The fact that the introduction of carbon trading can effectively reduce the level of carbon emission and increase the acceptance level of wind power is highlighted through the comparison of the results of three models’ computational examples. With the carbon trading mechanism, carbon capture power plants with new technologies are able to give full play to the advantage of reducing carbon emission and wind curtailment so as to promote the development of the energy conservation and emission reduction technology and reduce the total cost of the dispatching system.

  6. IMPREGNATION OF WOOD COMPOSITES

    Directory of Open Access Journals (Sweden)

    Engin Derya Gezer

    2003-04-01

    Full Text Available The production of wood based structural panel and lumber composites become to increase since the wood supply is changing due to the limit of larger dimension solid sawn lumber and insufficient solid woods with enough high strength as well. As we substitute wood composites for solid wood in protected application, these composite must show resistance to wood-destroying organisms such as fungi and insects. Accordingly, the exterior structural composites is required to be treated with preservatives. This paper provides an understanding of preservative treated wood composites. The objectives of this paper includes studying how to add preservative to wood composites, examining additive effect on glue-line and evaluating the best method of manufacturing wood composites treated with preservatives.

  7. Controlled release for crop and wood protection: Recent progress toward sustainable and safe nanostructured biocidal systems.

    Science.gov (United States)

    Mattos, Bruno D; Tardy, Blaise L; Magalhães, Washington L E; Rojas, Orlando J

    2017-09-28

    We review biocide delivery systems (BDS), which are designed to deter or control harmful organisms that damage agricultural crops, forests and forest products. This is a timely topic, given the growing socio-economical concerns that have motivated major developments in sustainable BDS. Associated designs aim at improving or replacing traditional systems, which often consist of biocides with extreme behavior as far as their solubility in water. This includes those that compromise or pollute soil and water (highly soluble or volatile biocides) or those that present low bioavailability (poorly soluble biocides). Major breakthroughs are sought to mitigate or eliminate consequential environmental and health impacts in agriculture and silviculture. Here, we consider the most important BDS vehicles or carriers, their synthesis, the environmental impact of their constituents and interactions with the active components together with the factors that affect their rates of release such as environmental factors and interaction of BDS with the crops or forest products. We put in perspective the state-of-the-art nanostructured carriers for controlled release, which need to address many of the challenges that exist in the application of BDS. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. K-intercalated carbon systems: Effects of dimensionality and substrate

    KAUST Repository

    Kaloni, Thaneshwor P.

    2012-06-01

    Density functional theory is employed to investigate the electronic properties of K-intercalated carbon systems. Young\\'s modulus indicates that the intercalation increases the intrinsic stiffness. For K-intercalated bilayer graphene on SiC(0001) the Dirac cone is maintained, whereas a trilayer configuration exhibits a small splitting at the Dirac point. Interestingly, in contrast to many other intercalated carbon systems, the presence of the SiC(0001) substrate does not suppress but rather enhances the charge carrier density. Reasonably high values are found for all systems, the highest carrier density for the bilayer. The band structure and electron-phonon coupling of free-standing K-intercalated bilayer graphene points to a high probability for superconductivity in this system. © 2012 Europhysics Letters Association.

  9. Endovascular vein harvest: systemic carbon dioxide absorption.

    Science.gov (United States)

    Maslow, Andrew M; Schwartz, Carl S; Bert, Arthur; Hurlburt, Peter; Gough, Jeffrey; Stearns, Gary; Singh, Arun K

    2006-06-01

    Endovascular vein harvest (EDVH) requires CO(2) insufflation to expand the subcutaneous space, allowing visualization and dissection of the saphenous vein. The purpose of this study was to assess the extent of CO(2) absorption during EDVH. Prospective observational study. Single tertiary care hospital. Sixty patients (30 EDVH and 30 open-vein harvest) undergoing isolated coronary artery bypass graft surgery. Hemodynamic, procedural, and laboratory data were collected prior to (baseline), during, and at it the conclusion (final) of vein harvesting. Data were also collected during cardiopulmonary bypass (CPB). Data were compared by using t tests, analysis of variance, and correlation statistics when needed. There were significant increases in arterial CO(2) (PaCO(2), 35%) and decreases in pH (1.35%) during EDVH. These were associated with increases in heart rate, mean blood pressure, and cardiac output. Within the EDVH group, greater elevations (>10 mmHg) in PaCO2 were more likely during difficult harvest procedures, and these patients exhibited greater increase in heart rate. Elevated CO(2) persisted during CPB, requiring higher systemic gas flows and greater use of phenylephrine to maintain desired hemodynamics. EDVH was associated with systemic absorption of CO(2). Greater absorption was more likely in difficult procedures and was associated with greater hemodynamic changes requiring medical therapy.

  10. Carbon-13 NMR spectroscopy of biological systems

    CERN Document Server

    Beckmann, Nicolau

    1995-01-01

    This book is intended to provide an in-depth understanding of 13C NMR as a tool in biological research. 13C NMR has provided unique information concerning complex biological systems, from proteins and nucleic acids to animals and humans. The subjects addressed include multidimensional heteronuclear techniques for structural studies of molecules in the liquid and solid states, the investigation of interactions in model membranes, the elucidation of metabolic pathwaysin vitro and in vivo on animals, and noninvasive metabolic studies performed on humans. The book is a unique mix of NMR methods and biological applications which makes it a convenient reference for those interested in research in this interdisciplinary area of physics, chemistry, biology, and medicine.Key Features* An interdisciplinary text with emphasis on both 13C NMR methodology and the relevant biological and biomedical issues* State-of-the-art 13C NMR techniques are described; Whenever possible, their advantages over other approaches are empha...

  11. Carbon Dioxide Sequestering Using Microalgal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Daniel J. Stepan; Richard E. Shockey; Thomas A. Moe; Ryan Dorn

    2002-02-01

    This project evaluated key design criteria, the technical feasibility, and the preliminary economic viability of a CO{sub 2}-sequestering system integrated with a coal-fired power plant based on microalgae biofixation. A review of relevant literature was conducted, and a bench-scale algal-based sequestration system was constructed and operated to verify algal growth capabilities using a simulated flue gas stream. The bench-scale system was a 20-gallon glass aquarium with a 16-gallon operating volume and was direct-sparged with a simulated flue gas. The flue gas composition was based on flue gas analyses for a 550-MW Coal Creek Power Station boiler in Underwood, North Dakota, which averaged 12.1% CO{sub 2}, 5.5% O{sub 2}, 423 ppm SO{sub 2}, 124 ppm NO{sub x}, and an estimated 50 mg/m{sup 3} fly ash loading. The algae were grown in Bold's basal growth medium. Lighting was provided using a two-tube fluorescent ''grow-light'' bulb fixture mounted directly above the tank. Algal growth appeared to be inhibited in the presence of SO{sub 2} using mixed cultures of green and blue-green cultures of algae. Samples of Monoraphidium strain MONOR02 and Nannochloropsis NANNO02 algal samples were obtained from the University of Hawaii Culture Collection. These samples did not exhibit inhibited growth in the presence of all the simulated flue gas constituents, but growth rates were somewhat lower than those expected, based on the review of literature. Samples of harvested algae were analyzed for protein, lipid, and carbohydrate content. A lipid content of 26% appeared to be fairly normal for algae, and it did not appear that large amounts of nitrogen were being fixed and promoting growth, nor were the algae starved for nitrogen. Proteins made up 41% of the total mass, and carbohydrates were assumed to be 33% (by difference). A preliminary economic analysis showed the costs of an integrated system based on microalgae biofixation to sequester 25% of the CO

  12. Wood gasification energy micro-generation system in Brazil- a Monte Carlo viability simulation

    Directory of Open Access Journals (Sweden)

    GLAUCIA APARECIDA PRATES

    2018-03-01

    Full Text Available The penetration of renewable energy into the electricity supply in Brazil is high, one of the highest in the World. Centralized hydroelectric generation is the main source of energy, followed by biomass and wind. Surprisingly, mini and micro-generation are negligible, with less than 2,000 connections to the national grid. In 2015, a new regulatory framework was put in place to change this situation. In the agricultural sector, the framework was complemented by the offer of low interest rate loans to in-farm renewable generation. Brazil proposed to more than double its area of planted forests as part of its INDC- Intended Nationally Determined Contributions to the UNFCCC-U.N. Framework Convention on Climate Change (UNFCCC. This is an ambitious target which will be achieved only if forests are attractive to farmers. Therefore, this paper analyses whether planting forests for in-farm energy generation with a with a woodchip gasifier is economically viable for microgeneration under the new framework and at if they could be an economic driver for forest plantation. At first, a static case was analyzed with data from Eucalyptus plantations in five farms. Then, a broader analysis developed with the use of Monte Carlo technique. Planting short rotation forests to generate energy could be a viable alternative and the low interest loans contribute to that. There are some barriers to such systems such as the inexistence of a mature market for small scale equipment and of a reference network of good practices and examples.

  13. Cost optimization of the system of use of wood in natural forests de Pinus caribaea

    Directory of Open Access Journals (Sweden)

    Fidel Cándano Acosta

    2012-03-01

    Full Text Available The work was carried out in natural forests of Pinus caribaea in areas of the forest company “La Palma” in the province of Pinar del Río in Cuba. The objective of the investigation was to minimize the cost of harvesting by combining the costs of haulage and road and load patio densities. In addition, the study also takes into consideration the interaction of costs of transportation and the thickness and quality of the layer of gravel on the road. The results of the investigation have shown a significant increase in the spacing between roads and load patios with the decrease of US$0.45/m³. It was possible to improve the quality of the layer of gravel on the road without changing the construction costs significantly, which led to a cost reduction of US$1.01/m³. The overall cost considering the new system decreases in US$1.46/m³. Another significant contribution is made by decreasing the impact to the ecosystem once the reduction on road density may reach around 44% in comparison to the current density.

  14. Reliability Implications in Wood Systems of a Bivariate Gaussian-Weibull Distribution and the Associated Univariate Pseudo-truncated Weibull

    Science.gov (United States)

    Steve P. Verrill; James W. Evans; David E. Kretschmann; Cherilyn A. Hatfield

    2014-01-01

    Two important wood properties are the modulus of elasticity (MOE) and the modulus of rupture (MOR). In the past, the statistical distribution of the MOE has often been modeled as Gaussian, and that of the MOR as lognormal or as a two- or three-parameter Weibull distribution. It is well known that MOE and MOR are positively correlated. To model the simultaneous behavior...

  15. Effect of cladding systems on moisture performance of wood-framed walls in a mixed-humid climate

    Science.gov (United States)

    S. Craig Drumheller; Charles G. Carll

    2010-01-01

    A 22-month field investigation of nine different north-and south-oriented wood-framed wall assemblies was conducted to determine the moisture performance of various wall construction types, most of which incorporated absorptive cladding. The study was conducted on the campus of the National Association of Home Builders (NAHB) Research Center, in Upper Marlboro, MD, 20...

  16. Proteomic and functional analysis of the cellulase system expressed by Postia placenta during brown rot of solid wood

    Science.gov (United States)

    Jae San Ryu; Semarjit Shary; Carl J. Houtman; Ellen A. Panisko; Premsagar Korripally; Franz J. St. John; Casey Crooks; Matti Siika-aho; Jon K. Magnuson; Kenneth E. Hammel

    2011-01-01

    Brown rot basidiomycetes have an important ecological role in lignocellulose recycling and are notable for their rapid degradation of wood polymers via oxidative and hydrolytic mechanisms. However, most of these fungi apparently lack processive (exo-acting) cellulases, such as cellobiohydrolases, which are generally required for efficient cellulolysis. The recent...

  17. Transport of Residual Nitrogen and Carbon through Intact Soil Cores Amended with Stockpiled Feedlot Manure with Wood-Chip or Straw Bedding.

    Science.gov (United States)

    Miller, J J; Beasley, B W; Drury, C F; Hao, X; Larney, F J

    2013-11-01

    The environmental impact of using wood chips instead of straw bedding with feedlot manure on transport and leaching potential from feedlot manure is unknown. Our main objective was to determine if transport of total N, total organic N, NO-N, and nonpurgeable organic C (NPOC) to subsurface soil was lower for soils amended with feedlot manure if combined with wood chips compared with straw. A secondary objective was to compare transport of N and NPOC with organic amendments versus inorganic fertilizer. Stockpiled feedlot manure (SM) with wood chip (SM-WD) or barley straw (SM-ST) bedding at 39 Mg (dry wt.) ha, and inorganic fertilizer (IN) at 100 kg N ha, was applied annually for 13 yr to a clay loam soil in a replicated field experiment in southern Alberta, Canada. Intact soil cores were taken in fall 2011 (0-30 cm depth) from the three treatments, and the residual N and NPOC were eluted from the soil cores. Total N, total organic N, and NPOC were determined on filtered (1.0 μm) effluent samples that are primarily dissolved fraction but may contain some small particulate N and C. Peak concentrations, flow-weighted mean concentrations, and mass loss of total N, total organic N, NO-N, and NPOC were significantly ( ≤ 0.05) lower by 35 to 86% for SM-WD compared with SM-ST. Mean recoveries were also significantly lower for SM-WD than SM-ST by 0.07 to 8% (absolute difference). The transport behavior was similar for SM-WD and IN treatment, but solute transport was greater for SM-ST than for IN. Application of stockpiled feedlot manure with wood chips instead of straw bedding may be a beneficial management practice to reduce transport and leaching potential of N fractions and NPOC. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  18. Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup, and Oxygen Separation Equipment; Task 2: Gas Cleanup Design and Cost Estimates -- Wood Feedstock

    Energy Technology Data Exchange (ETDEWEB)

    Nexant Inc.

    2006-05-01

    As part of Task 2, Gas Cleanup and Cost Estimates, Nexant investigated the appropriate process scheme for treatment of wood-derived syngas for use in the synthesis of liquid fuels. Two different 2,000 metric tonne per day gasification schemes, a low-pressure, indirect system using the gasifier, and a high-pressure, direct system using gasification technology were evaluated. Initial syngas conditions from each of the gasifiers was provided to the team by the National Renewable Energy Laboratory. Nexant was the prime contractor and principal investigator during this task; technical assistance was provided by both GTI and Emery Energy.

  19. Wood wastes (biomass) supplying the central heating system of a housing project. Final report. Zentralbeheizung einer Siedlung mit Holzabfaellen (Biomasse). Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Heubrandner, P.; Schaup, P.; Streicher, W.

    1985-01-01

    Around 1980 a group of 21 young families joined to found the 'Wohnprojekt Thal' association. The housing project aimed at establishing a common residential quarter representing the members' idea and meeting the requirements of a housing area and economic heat supply. Buildings were erected in Thal which is located about 10 km northwest of Graz. The central heating system was chosen to be consisting of a top water heating system and central boiler for the processing of domestic biomass (barks and wood wastes). The final report points out the notably positive experiences gained with respect to the project's efficiency and economy.

  20. Carbon-Carbon Recuperators in Closed-Brayton-Cycle Space Power Systems

    Science.gov (United States)

    Barrett, Michael J.; Johnson, Paul K.; Naples, Andrew G.

    2006-01-01

    The feasibility of using carbon-carbon (C-C) recuperators in conceptual closed-Brayton-cycle space power conversion systems was assessed. Recuperator performance expectations were forecast based on notional thermodynamic cycle state values for potential planetary missions. Resulting thermal performance, mass and volume for plate-fin C-C recuperators were estimated and quantitatively compared with values for conventional offset-strip-fin metallic designs. Mass savings of 30 to 60 percent were projected for C-C recuperators with effectiveness greater than 0.9 and thermal loads from 25 to 1400 kWt. The smaller thermal loads corresponded with lower mass savings; however, 60 percent savings were forecast for all loads above 300 kWt. System-related material challenges and compatibility issues were also discussed.

  1. Carbon footprint of construction using industrialised building system

    Science.gov (United States)

    Lim, P. Y.; Yahya, K.; Aminudin, E.; Zakaria, R.; Haron, Z.; Mohamad Zin, R.; Redzuan, A. A. H.

    2017-11-01

    Industrialised Building System (IBS) is more sustainable to the environment as compared to the conventional construction methods. However, the construction industry in Malaysia has low acceptance towards IBS due to the resistance to change and also lack of awareness towards sustainability development. Therefore, it is important to study the amount carbon footprint produced by IBS during its manufacturing and construction stage, and also the amount of carbon footprint produced by one meter square of gross floor area of IBS construction using Life Cycle Assessment (LCA) to ease future research through the comparison of the carbon footprint of IBS with the conventional building system. As a result, a case study on a residential type of construction in the vicinity of Johor Bahru, Malaysia was carried out to obtain the necessary data and result. From the data analysis, the amount of greenhouse gases (GHG) for a residential type IBS construction based on the raw materials and resources involved to manufacture and construct IBS components is 0.127 tonnes fossil CO2Eq per meter square. Raw material that contributed to the most amount of carbon footprint is Ordinary Portland Cement (OPC), followed by steel bars, autoclaved aerated blocks and diesel. The LCA data acquired will be very useful in implementing IBS in the residential type construction. As a result, the awareness towards sustainable construction using IBS can be improved.

  2. Wood pole overhead lines

    CERN Document Server

    Wareing, Brian

    2005-01-01

    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  3. Mechanics of Wood Machining

    CERN Document Server

    Csanády, Etele

    2013-01-01

    Wood is one of the most valuable materials for mankind, and since our earliest days wood materials have been widely used. Today we have modern woodworking machine and tools; however, the raw wood materials available are continuously declining. Therefore we are forced to use this precious material more economically, reducing waste wherever possible. This new textbook on the “Mechanics of Wood Machining” combines the quantitative, mathematical analysis of the mechanisms of wood processing with practical recommendations and solutions. Bringing together materials from many sources, the book contains new theoretical and experimental approaches and offers a clear and systematic overview of the theory of wood cutting, thermal loading in wood-cutting tools, dynamic behaviour of tool and work piece, optimum choice of operational parameters and energy consumption, the wear process of the tools, and the general regularities of wood surface roughness. Diagrams are provided for the quick estimation of various process ...

  4. Methods of analyzing carbon nanostructures, methods of preparation of analytes from carbon nanostructures, and systems for analyzing carbon nanostructures

    KAUST Repository

    Da Costa, Pedro Miquel Ferreira Joaquim

    2016-09-09

    Provided herein is a method determining the concentration of impurities in a carbon material, comprising: mixing a flux and a carbon material to form a mixture, wherein the carbon material is selected from the group consisting of graphene, carbon nanotubes, fullerene, carbon onions, graphite, carbon fibers, and a combination thereof; heating the mixture using microwave energy to form fused materials; dissolution of the fused materials in an acid mixture; and measuring the concentration of one or more impurities.

  5. Temperature effects on wood anatomy, wood density, photosynthesis and biomass partitioning of Eucalyptus grandis seedlings.

    Science.gov (United States)

    Thomas, D S; Montagu, K D; Conroy, J P

    2007-02-01

    Wood density, a gross measure of wood mass relative to wood volume, is important in our understanding of stem volume growth, carbon sequestration and leaf water supply. Disproportionate changes in the ratio of wood mass to volume may occur at the level of the whole stem or the individual cell. In general, there is a positive relationship between temperature and wood density of eucalypts, although this relationship has broken down in recent years with wood density decreasing as global temperatures have risen. To determine the anatomical causes of the effects of temperature on wood density, Eucalyptus grandis W. Hill ex Maiden seedlings were grown in controlled-environment cabinets at constant temperatures from 10 to 35 degrees C. The 20% increase in wood density of E. grandis seedlings grown at the higher temperatures was variously related to a 40% reduction in lumen area of xylem vessels, a 10% reduction in the lumen area of fiber cells and a 10% increase in fiber cell wall thickness. The changes in cell wall characteristics could be considered analogous to changes in carbon supply. Lumen area of fiber cells declined because of reduced fiber cell expansion and increased fiber cell wall thickening. Fiber cell wall thickness was positively related to canopy CO2 assimilation rate (Ac), which increased 26-fold because of a 24-fold increase in leaf area and a doubling in leaf CO2 assimilation rate from minima at 10 and 35 degrees C to maxima at 25 and 30 degrees C. Increased Ac increased seedling volume, biomass and wood density; but increased wood density was also related to a shift in partitioning of seedling biomass from roots to stems as temperature increased.

  6. High-pressure vapor-liquid equilibria of two binary systems: Carbon dioxide + cyclohexanol and carbon dioxide + cyclohexanone

    Energy Technology Data Exchange (ETDEWEB)

    Laugier, S. [Ecole Nationale Superieure de Chimie et Physique de Bordeaux, Talence (France); Richon, D. [Ecole Nationale Superieure des Mines de Paris, Fontainebleau (France)

    1997-01-01

    Vapor-liquid equilibria for carbon dioxide + cyclohexanol and carbon dioxide + cyclohexanone were measured using an apparatus based on a static-analytic method with in situ samplings. P, T, x, y measurements were made at pressures up to 22 MPa. The carbon dioxide + cyclohexanol system was studied at 433 and 473 K, and carbon dioxide + cyclohexanone, at 433 and 473 K. The results are correlated by the Redlich-Kwong-Soave and Peng and Robinson equations and several mixing rules. The best fittings are obtained with the Peng-Robinson equation of state and a two-parameter mixing rule, i.e., within 1.1% for both pressures and vapor mole fractions on the carbon dioxide + cyclohexanone system and within 1.9% for pressures and 2.9% for vapor mole fractions on the carbon dioxide + cyclohexanol system. More recent equations by Patel and Teja and Salim and Trebble show no significant advantages.

  7. Carbon cycling in a zero-discharge mariculture system.

    Science.gov (United States)

    Schneider, Kenneth; Sher, Yonatan; Erez, Jonathan; van Rijn, Jaap

    2011-03-01

    Interest in mariculture systems will rise in the near future due to the decreased ability of the ocean to supply the increasing demand for seafood. We present a trace study using stable carbon and nitrogen isotopes and chemical profiles of a zero-discharge mariculture system stocked with the gilthead seabream (Sparus aurata). Water quality maintenance in the system is based on two biofiltration steps. Firstly, an aerobic treatment step comprising a trickling filter in which ammonia is oxidized to nitrate. Secondly, an anaerobic step comprised of a digestion basin and a fluidized bed reactor where excess organic matter and nitrate are removed. Dissolved inorganic carbon and alkalinity values were higher in the anaerobic loop than in the aerobic loop, in agreement with the main biological processes taking place in the two treatment steps. The δ13C of the dissolved inorganic carbon (δ13C(DIC)) was depleted in 13C in the anaerobic loop as compared to the aerobic loop by 2.5-3‰. This is in agreement with the higher dissolved inorganic carbon concentrations in the anaerobic loop and the low water retention time and the chemolithotrophic activity of the aerobic loop. The δ13C and δ15N of organic matter in the mariculture system indicated that fish fed solely on feed pellets. Compared to feed pellets and particulate organic matter, the sludge in the digestion basin was enriched in 15N while δ13C was not significantly different. This latter finding points to an intensive microbial degradation of the organic matter taking place in the anaerobic treatment step of the system. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. System-Level Design Considerations for Carbon Nanotube Electromechanical Resonators

    Directory of Open Access Journals (Sweden)

    Christian Kauth

    2013-01-01

    Full Text Available Despite an evermore complete plethora of complex domain-specific semiempirical models, no succinct recipe for large-scale carbon nanotube electromechanical systems design has been formulated. To combine the benefits of these highly sensitive miniaturized mechanical sensors with the vast functionalities available in electronics, we identify a reduced key parameter set of carbon nanotube properties, nanoelectromechanical system design, and operation that steers the sensor’s performance towards system applications, based on open- and closed-loop topologies. Suspended single-walled carbon nanotubes are reviewed in terms of their electromechanical properties with the objective of evaluating orders of magnitude of the electrical actuation and detection mechanisms. Open-loop time-averaging and 1ω or 2ω mixing methods are completed by a new 4ω actuation and detection technique. A discussion on their extension to closed-loop topologies and system applications concludes the analysis, covering signal-to-noise ratio, and the capability to spectrally isolate the motional information from parasitical feedthrough by contemporary electronic read-out techniques.

  9. Multiplying Forest Garden Systems with biochar based organic fertilization for high carbon accumulation, improved water storage, nutrient cycling, and increased food diversity and farm productivity

    Science.gov (United States)

    Schmidt, Hans-Peter; Pandit, Bishnu Hari; Lucht, Wolfgang; Gerten, Dieter; Kammann, Claudia

    2017-04-01

    10 years). Besides covering the set-up costs, farmers received and continue to receive carbon payments for each survived tree during the first three years. Based on a voluntary carbon credit price of 35 USD per t CO2, the annual income of the farmers increase by 6 to 13% depending on their poverty level. After this initial period of three years, the income from tree crops (fruits, nuts, medicine, essential oil, silk, perfume, honey, timber, animal fodder) exceeds by far the (catalyzer) carbon credits (average crop income for the 25,000 trees including secondary mixed cropping > 150,000 USD). The trees will accumulate carbon for 15 to 75 years depending on the tree species. While trunk wood will be used for construction timber and thus continue to sequester carbon for probably 50 years. While part of the wood will be used for cooking, at least 50% of the tree biomass will be pyrolyzed to biochar to produce organic biochar-based fertilizers and for using the pyrolysis heat for the production of essential oil, pasteurization and fruit or tea leaves drying. Compared to the barren terraces, sparsely covered with grasses and prone to erosion, the forest garden system with organic biochar-based fertilizer, continuous soil cover, mulching, leaf litter fall, root growth and root exudates, rotating cover crops and animal pasture, soil organic carbon (SOC) is expected to increase annually. Therefore, for each participating farmer at least one land spot is GIS marked for soil organic carbon analysis to be executed every five years and to calculate and certify soil organic carbon increases for additional or bonus carbon credits. In our presentation we will show and document the establishment of the forest garden systems, and discuss the link between local carbon sequestration and global carbon markets, the carbon calculation and certification procedures, and the challenge for multiplying such systems inter-regional and internationally.

  10. Carbon footprint and ammonia emissions of California beef production systems.

    Science.gov (United States)

    Stackhouse-Lawson, K R; Rotz, C A; Oltjen, J W; Mitloehner, F M

    2012-12-01

    Beef production is a recognized source of greenhouse gas (GHG) and ammonia (NH(3)) emissions; however, little information exists on the net emissions from beef production systems. A partial life cycle assessment (LCA) was conducted using the Integrated Farm System Model (IFSM) to estimate GHG and NH(3) emissions from representative beef production systems in California. The IFSM is a process-level farm model that simulates crop growth, feed production and use, animal growth, and the return of manure nutrients back to the land to predict the environmental impacts and economics of production systems. Ammonia emissions are determined by summing the emissions from animal housing facilities, manure storage, field applied manure, and direct deposits of manure on pasture and rangeland. All important sources and sinks of methane, nitrous oxide, and carbon dioxide are predicted from primary and secondary emission sources. Primary sources include enteric fermentation, manure, cropland used in feed production, and fuel combustion. Secondary emissions occur during the production of resources used on the farm, which include fuel, electricity, machinery, fertilizer, and purchased animals. The carbon footprint is the net exchange of all GHG in carbon dioxide equivalent (CO(2)e) units per kg of HCW produced. Simulated beef production systems included cow-calf, stocker, and feedlot phases for the traditional British beef breeds and calf ranch and feedlot phases for Holstein steers. An evaluation of differing production management strategies resulted in ammonia emissions ranging from 98 ± 13 to 141 ± 27 g/kg HCW and carbon footprints of 10.7 ± 1.4 to 22.6 ± 2.0 kg CO(2)e/kg HCW. Within the British beef production cycle, the cow-calf phase was responsible for 69 to 72% of total GHG emissions with 17 to 27% from feedlot sources. Holstein steers that entered the beef production system as a by-product of dairy production had the lowest carbon footprint because the emissions

  11. TIR-1 carbon dioxide laser system for fusion

    Science.gov (United States)

    Adamovich, V. A.; Anisimov, V. N.; Afonin, E. A.; Baranov, V. Iu.; Borzenko, V. L.; Kozochkin, S. M.; Maliuta, D. D.; Satov, Iu. A.; Sebrant, A. Iu.; Smakovski, Iu. B.

    1980-03-01

    The paper examines the TIR-1 carbon dioxide laser system for fusion. The current efforts are concentrated on (1) the microsecond laser pulse plasma heating in solenoids and theta pinches, and (2) nanosecond CO2 laser utilization for inertial confinement fusion. The TIR-1 system was designed to develop nanosecond CO2 laser technology and to study laser-target interaction at 10 microns. This system consists of an oscillator-preamplifier that produces about 1-nsec laser pulse with an energy contrast ratio of 1 million, a large triple-pass amplifier, and a target chamber with diagnostic equipment.

  12. Calcium carbonate scale control in once-through cooling systems

    Energy Technology Data Exchange (ETDEWEB)

    Brown, J.M.; McDowell, J.F. (Betz Lab., Inc., The Woodlands, TX (US)); Heflin, R.F. (Betz Industrial, Bismark, ND (US)); Karlovich, D.N. (Beltz Industrial, Trevosa, PA (US)); Bloom, M.F. (Minnkota Power Cooperative, Inc., Grand Forks, ND (USA))

    1989-01-01

    This paper reports on a laboratory-scale model surface condenser used to design a successful once-through cooling water treatment program for calcium carbonate scale inhibition at Young Station. The treatment program has maintained the station's condenser cleanliness factor at approximately 100% for the duration of the treatment. The model surface condensers simulate cycled systems as well as once-through cooling systems. They are fully automated with computer-controlled chemical feed, flow, heat flux, makeup, and blowdown and data acquisition systems.

  13. The wood, renewable energy; Le bois, energie renouvelable

    Energy Technology Data Exchange (ETDEWEB)

    Acket, C

    2006-12-15

    This document evaluates the french forest situation and its future. Indeed, the wood energy constitutes in France the first renewable energy after the hydraulic. It presents the today situation of the french forest providing statistical data, evaluation of the energy estimation, the carbon fixation, the resources, the perspectives wood energy for 2050, the biofuels and an economic analysis. (A.L.B.)

  14. Structure of lignin from Pinus radiata exploded wood

    Energy Technology Data Exchange (ETDEWEB)

    Hemmingson, J.A.

    1983-01-01

    The lignin extracted by acetone from radiata pine wood subjected to steam explosion was examined by Carbon 13 NMR spectroscopy. It was shown to be a low molecular weight, fairly extensively modified lignin which was structurally rather different from milled wood lignin. 17 references.

  15. Mechanical properties of wood disproportionately increase with increasing density.

    Science.gov (United States)

    Niklas, Karl J; Spatz, Hanns-Christof

    2012-01-01

    Prior work using a large data set has shown that the mechanical properties of wood disproportionately increase with increasing wood density across diverse species, e.g., stems composed of denser wood are stiffer and stronger than stems with equivalent cross-sections composed of less dense wood. However, an alternative approach, introducing the precondition of constant construction cost for the same data set, adduces that for any given construction cost, stems composed of lesser dense woods are stiffer and stronger then stems composed of denser woods. We evaluated these two approaches using generic allometric principles and the same large data set. This evaluation shows that construction costs cannot be constant over an entire ensemble of stems composed of different species of wood. For any specified construction cost (denoted by a k-value), only a particular subgroup of stems is addressed. The conclusions derived for this subgroup cannot be generalized to the entire ensemble of stems composed of different species of wood. Stems composed of denser wood are, on average as stiff and strong, or stiffer and stronger than stems with equivalent cross-sections composed of less dense wood. Denser wood may have a higher carbon construction cost, but its mechanical benefits likely outweigh the extra cost.

  16. Penetration and Effectiveness of Micronized Copper in Refractory Wood Species.

    Directory of Open Access Journals (Sweden)

    Chiara Civardi

    Full Text Available The North American wood decking market mostly relies on easily treatable Southern yellow pine (SYP, which is being impregnated with micronized copper (MC wood preservatives since 2006. These formulations are composed of copper (Cu carbonate particles (CuCO3·Cu(OH2, with sizes ranging from 1 nm to 250 μm, according to manufacturers. MC-treated SYP wood is protected against decay by solubilized Cu2+ ions and unreacted CuCO3·Cu(OH2 particles that successively release Cu2+ ions (reservoir effect. The wood species used for the European wood decking market differ from the North American SYP. One of the most common species is Norway spruce wood, which is poorly treatable i.e. refractory due to the anatomical properties, like pore size and structure, and chemical composition, like pit membrane components or presence of wood extractives. Therefore, MC formulations may not suitable for refractory wood species common in the European market, despite their good performance in SYP. We evaluated the penetration effectiveness of MC azole (MCA in easily treatable Scots pine and in refractory Norway spruce wood. We assessed the effectiveness against the Cu-tolerant wood-destroying fungus Rhodonia placenta. Our findings show that MCA cannot easily penetrate refractory wood species and could not confirm the presence of a reservoir effect.

  17. Alaska Wood Biomass Energy Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Jonathan Bolling

    2009-03-02

    The purpose of the Craig Wood Fired Boiler Project is to use waste wood from local sawmilling operations to provide heat to local public buildings, in an effort to reduce the cost of operating those buildings, and put to productive use a byproduct from the wood milling process that otherwise presents an expense to local mills. The scope of the project included the acquisition of a wood boiler and the delivery systems to feed wood fuel to it, the construction of a building to house the boiler and delivery systems, and connection of the boiler facility to three buildings that will benefit from heat generated by the boiler: the Craig Aquatic Center, the Craig Elementary School, and the Craig Middle School buildings.

  18. Request for wood samples

    NARCIS (Netherlands)

    NN,

    1977-01-01

    In recent years the wood collection at the Rijksherbarium was greatly expanded following a renewed interest in wood anatomy as an aid for solving classification problems. Staff members of the Rijksherbarium added to the collection by taking interesting wood samples with them from their expeditions

  19. Iron Stain on Wood

    Science.gov (United States)

    Mark Knaebe

    2013-01-01

    Iron stain, an unsightly blue–black or gray discoloration, can occur on nearly all woods. Oak, redwood, cypress, and cedar are particularly prone to iron stain because these woods contain large amounts of tannin-like extractives. The discoloration is caused by a chemical reaction between extractives in the wood and iron in steel products, such as nails, screws, and...

  20. Energy from wood

    Science.gov (United States)

    J.I. Zerbe

    2004-01-01

    In most developing countries wood and charcoal are the predominant fuels for preparation of food to maintain the quality of life that encompasses the majority of citizens. In many developing countries wood fuels are also important for small and medium size industries. Moreover, energy from wood continues to be important in industrial countries. In the USA biomass...

  1. Wood Formation in Trees

    Science.gov (United States)

    Melanie Mauriat; Gregoire Le Provost; Phillippe Rozenberg; Sylvain Delzon; Nathalie Breda; Bruno Clair; Catherine Coutand; Jean-Christoph Domec; Thierry Fourcaud; Jacqueline Grima-Pettenati; Raul Herrera; Jean-Charles Leple; Nicolas Richet; Jean-Francois Trontin; Christophe Plomion

    2014-01-01

    Among the ecosystem services provided by forests, wood provisioning takes a central position. Wood and derived products have played a critical role in the evolution of human kind and demand for raw material is increasing in a foreseeable future. Wood is used for energy production, construction and a wide variety of products for which different properties are required....

  2. ENERGY, ACOUSTICS AND ENVIRONMENTAL SUSTAINABILITY ANALYSIS OF BUILDING SYSTEMS BASED ON WOOD WOOL MINERALIZED WITH PORTLAND CEMENT

    OpenAIRE

    Pavarin, Cora

    2014-01-01

    In the present work various aspects of the energetic, thermal and acoustic properties of porous materials with wood wool mineralized Portland cement have been analyzed, in cooperation with the company Celenit Srl, a manufacturer of panels for building insulation. These products are also recognized interesting and desirable for their environmental sustainability through specific certifications. Remind that sustainability means "development that meets the needs of the present without comprom...

  3. Wood-burning stoves worldwide

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo

    More than any time in our history, the wood-burning stove continues to be the most popular technology used for cooking and heating worldwide. According to the World Health Organization and recent scientific studies, the inefficient use of solid-fuels in traditional stoves constitutes the major...... systems, improved efficient retrofits and advanced stove innovations. In chapter 3, four popular wood-burning practices found in five countries were singled-out to be examined closely in four case studies: “cooking in Brazil”, “cooking and heating in Peru”, “heating in Portugal” and “recreational heat...

  4. Neglected role of fungal community composition in explaining variation in wood decay rates

    NARCIS (Netherlands)

    Wal, van der Annemieke; Ottosson, E.G.B.; Boer, de W.

    2015-01-01

    Decomposition of wood is an important component of global carbon cycling. Most wood decomposition models are based on tree characteristics and environmental conditions; however, they do not include community dynamics of fungi which are the major wood decomposers. We examined the factors explaining

  5. LCA-based optimization of wood utilization under special consideration of a cascading use of wood.

    Science.gov (United States)

    Höglmeier, Karin; Steubing, Bernhard; Weber-Blaschke, Gabriele; Richter, Klaus

    2015-04-01

    Cascading, the use of the same unit of a resource in multiple successional applications, is considered as a viable means to improve the efficiency of resource utilization and to decrease environmental impacts. Wood, as a regrowing but nevertheless limited and increasingly in demand resource, can be used in cascades, thereby increasing the potential efficiency per unit of wood. This study aims to assess the influence of cascading wood utilization on optimizing the overall environmental impact of wood utilization. By combining a material flow model of existing wood applications - both for materials provision and energy production - with an algebraic optimization tool, the effects of the use of wood in cascades can be modelled and quantified based on life cycle impact assessment results for all production processes. To identify the most efficient wood allocation, the effects of a potential substitution of non-wood products were taken into account in a part of the model runs. The considered environmental indicators were global warming potential, particulate matter formation, land occupation and an aggregated single score indicator. We found that optimizing either the overall global warming potential or the value of the single score indicator of the system leads to a simultaneous relative decrease of all other considered environmental impacts. The relative differences between the impacts of the model run with and without the possibility of a cascading use of wood were 7% for global warming potential and the single score indicator, despite cascading only influencing a small part of the overall system, namely wood panel production. Cascading led to savings of up to 14% of the annual primary wood supply of the study area. We conclude that cascading can improve the overall performance of a wood utilization system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. 'Not quite out of the woods': potential for misdiagnosis of delayed neurologic syndrome of carbon monoxide poisoning as relapse of mental illness.

    Science.gov (United States)

    Bhagwat, Samir; Bruxner, George

    2017-10-01

    The aim of this paper is to provide an overview of the delayed neurologic syndrome of carbon monoxide poisoning and its clinical importance in psychiatric settings. A brief review of carbon monoxide poisoning is presented with a focus on the delayed neurologic syndrome and a case of deliberate self- poisoning is described. As in the case described, the delayed manifestations of carbon monoxide poisoning can resemble a relapse of psychiatric illness. In cases of carbon monoxide poisoning it is important to consider the delayed neurologic syndrome as misdiagnosis could lead to inappropriate treatment and worsened outcome.

  7. Carbon Capture and Water Emissions Treatment System (CCWESTRS) at Fossil-Fueled Electric Generating Plants

    Energy Technology Data Exchange (ETDEWEB)

    P. Alan Mays; Bert R. Bock; Gregory A. Brodie; L. Suzanne Fisher; J. Devereux Joslin; Donald L. Kachelman; Jimmy J. Maddox; N. S. Nicholas; Larry E. Shelton; Nick Taylor; Mark H. Wolfe; Dennis H. Yankee; John Goodrich-Mahoney

    2005-08-30

    2025. Other potential benefits of the demonstration include developing a passive technology for water treatment for trace metal and nutrient release reductions, using power plant by-products to improve coal mine land reclamation and carbon sequestration, developing wildlife habitat and green-space around production facilities, generating Total Maximum Daily Load (TMDL) credits for the use of process water, and producing wood products for use by the lumber and pulp and paper industry. Project activities conducted during the five year project period include: Assessing tree cultivation and other techniques used to sequester carbon; Project site assessment; Greenhouse studies to determine optimum plant species and by-product application; Designing, constructing, operating, monitoring, and evaluating the CCWESTRS system; and Reporting (ongoing). The ability of the system to sequester carbon will be the primary measure of effectiveness, measured by accessing survival and growth response of plants within the CCWESTRS. In addition, costs associated with design, construction, and monitoring will be evaluated and compared to projected benefits of other carbon sequestration technologies. The test plan involves the application of three levels each of two types of power plant by-products--three levels of FGD gypsum mulch, and three levels of ash pond irrigation water. This design produces nine treatment levels which are being tested with two species of hardwood trees (sweet gum and sycamore). The project is examining the effectiveness of applications of 0, 8-cm, and 15-cm thick gypsum mulch layers and 0, 13 cm, and 25 cm of coal fly ash water for irrigation. Each treatment combination is being replicated three times, resulting in a total of 54 treatment plots (3 FGD gypsum levels X 3 irrigation water levels x 2 tree species x 3 replicates). Survival and growth response of plant species in terms of sequestering carbon in plant material and soil will be the primary measure of

  8. Feasibility study for new ecolabels according to ISO 14024 (type 1) within the product group: wood pellet heating systems; Machbarkeitsstudie fuer neue Umweltzeichen fuer die Produktgruppe: Holzpelletfeuerungen

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, E.; Weiss, J.; Hirschl, B. [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany)

    2003-01-01

    This assessment is a feasibility study according to ISO 14024. It deals with the question whether an ecolabel is suitable for wood pellet heating systems and how concrete criteria for an ecolabel for wood pellet heating plants could be specified. The study begins with a comprehensive market analysis in order to identify possible plants for which an ecolabel would make sense. In the main part of the study, the environmental relevance of the chosen plants is analysed. For this analysis, plant manufacturers were interviewed and a comparison between wood pellet heating systems and heating systems which use gas, oil or wood was carried out. On the basis of this analysis, it was possible to derive a number of criteria which were discussed with company representatives and other experts in this field. As a result of this dialogue and the investigation process as a whole, the introduction of an ecolabel for wood pellet heating plants can be recommended. Wood pellet heating systems are characterized by their high level of automatation and the use of standardized fuels with constant high quality. Thus, they reach high combustion quality with low emission rates, and risks of misuse are minimized. They may contribute to the increased use of renewable energies and thereby to the achievement of climate protection goals. The proposed certification principles comprise requirements regarding (a) the efficient energy use (efficiency factor under partial load and nominal load, plant's supplementary energy consumption), (b) emission values for CO, NO{sub x}, dust and organic substances, (c) the offer of additional services, as well as (d) requirements with regard to the operating instructions. The transcription of the label is proposed as 'Ecolabel.. because low emission and energy-efficient'. (orig.) [German] Beim vorliegenden Gutachten handelt es sich um eine Machbarkeitsstudie nach ISO 14024. Es behandelt die Frage, ob ein Umweltzeichen fuer Holzpelletfeuerungen

  9. Not Just Lumber—Using Wood in the Sustainable Future of Materials, Chemicals, and Fuels

    Science.gov (United States)

    Jakes, Joseph E.; Arzola, Xavier; Bergman, Rick; Ciesielski, Peter; Hunt, Christopher G.; Rahbar, Nima; Tshabalala, Mandla; Wiedenhoeft, Alex C.; Zelinka, Samuel L.

    2016-09-01

    Forest-derived biomaterials can play an integral role in a sustainable and renewable future. Research across a range of disciplines is required to develop the knowledge necessary to overcome the challenges of incorporating more renewable forest resources in materials, chemicals, and fuels. We focus on wood specifically because in our view, better characterization of wood as a raw material and as a feedstock will lead to its increased utilization. We first give an overview of wood structure and chemical composition and then highlight current topics in forest products research, including (1) industrial chemicals, biofuels, and energy from woody materials; (2) wood-based activated carbon and carbon nanostructures; (3) development of improved wood protection treatments; (4) massive timber construction; (5) wood as a bioinspiring material; and (6) atomic simulations of wood polymers. We conclude with a discussion of the sustainability of wood as a renewable forest resource.

  10. Not Just Lumber—Using Wood in the Sustainable Future of Materials, Chemicals, and Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Jakes, Joseph E.; Arzola, Xavier; Bergman, Rick; Ciesielski, Peter; Hunt, Christopher G.; Rahbar, Nima; Tshabalala, Mandla; Wiedenhoeft, Alex C.; Zelinka, Samuel L.

    2016-07-21

    Forest-derived biomaterials can play an integral role in a sustainable and renewable future. Research across a range of disciplines is required to develop the knowledge necessary to overcome the challenges of incorporating more renewable forest resources in materials, chemicals, and fuels. We focus on wood specifically because in our view, better characterization of wood as a raw material and as a feedstock will lead to its increased utilization. We first give an overview of wood structure and chemical composition and then highlight current topics in forest products research, including (1) industrial chemicals, biofuels, and energy from woody materials; (2) wood-based activated carbon and carbon nanostructures; (3) development of improved wood protection treatments; (4) massive timber construction; (5) wood as a bioinspiring material; and (6) atomic simulations of wood polymers. We conclude with a discussion of the sustainability of wood as a renewable forest resource.

  11. The detection of carbonation by the Drosophila gustatory system.

    Science.gov (United States)

    Fischler, Walter; Kong, Priscilla; Marella, Sunanda; Scott, Kristin

    2007-08-30

    There are five known taste modalities in humans: sweet, bitter, sour, salty and umami (the taste of monosodium glutamate). Although the fruitfly Drosophila melanogaster tastes sugars, salts and noxious chemicals, the nature and number of taste modalities in this organism is not clear. Previous studies have identified one taste cell population marked by the gustatory receptor gene Gr5a that detects sugars, and a second population marked by Gr66a that detects bitter compounds. Here we identify a novel taste modality in this insect: the taste of carbonated water. We use a combination of anatomical, calcium imaging and behavioural approaches to identify a population of taste neurons that detects CO2 and mediates taste acceptance behaviour. The taste of carbonation may allow Drosophila to detect and obtain nutrients from growing microorganisms. Whereas CO2 detection by the olfactory system mediates avoidance, CO2 detection by the gustatory system mediates acceptance behaviour, demonstrating that the context of CO2 determines appropriate behaviour. This work opens up the possibility that the taste of carbonation may also exist in other organisms.

  12. A Review on the Respiratory System Toxicity of Carbon Nanoparticles

    Directory of Open Access Journals (Sweden)

    Maricica Pacurari

    2016-03-01

    Full Text Available The respiratory system represents the main gateway for nanoparticles’ entry into the human body. Although there is a myriad of engineered nanoparticles, carbon nanoparticles/nanotubes (CNPs/CNTs have received much attention mainly due to their light weight, very high surface area, durability, and their diverse applications. Since their discovery and manufacture over two decades ago, much has been learned about nanoparticles’ interactions with diverse biological system models. In particular, the respiratory system has been of great interest because various natural and man-made fibrous particles are known to be responsible for chronic and debilitating lung diseases. In this review, we present up-to-date the literature regarding the effects of CNTs or carbon nanofibers (CNFs on the human respiratory system with respect to respiratory toxicity pathways and associated pathologies. This article is intended to emphasize the potentially dangerous effects to the human respiratory system if inadequate measures are used in the manufacture, handling, and preparation and applications of CNP or CNP-based products.

  13. Wood for energy production. Technology - environment - economy

    Energy Technology Data Exchange (ETDEWEB)

    Serup, H.; Falster, H.; Gamborg, C. [and others

    1999-10-01

    `Wood for Energy Production`, 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named `Wood Chips for Energy Production`. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. `Wood for Energy Production` is also available in German and Danish. (au)

  14. Carbon nanoparticles as possible radioprotectors in biological systems

    Science.gov (United States)

    Krokosz, Anita; Lichota, Anna; Nowak, Katarzyna E.; Grebowski, Jacek

    2016-11-01

    Ionizing radiation causes radiolysis of water and the production of reactive oxygen species (ROS), which interact with biochemically important molecules in cells leading to cell death. In order to reduce the dangerous radiation effects on cells, tissues and organs, the search for radioprotectors is essential. ROS result in damage to biomolecules, e.g. proteins, lipids and DNA, and as a consequence, cause the loss of cell function. The chemical and biological properties of fullerenes and other carbon nanoparticles enable the possibility of generating either oxidative stress or its attenuation by both scavenging free radicals and modification/upregulation of endogenous antioxidative systems in cells. This study discusses the possible applications of carbon nanoparticles as radioprotective agents and/or free radical scavengers. Special attention is paid to water-soluble fullerenes as they are promising radioprotectors and exhibit low toxicity and cytotoxicity.

  15. Wood production, wood technology, and biotechnological impacts.

    OpenAIRE

    2007-01-01

    In the year 2001, Prof. Dr. Ursula Kües was appointed at the Faculty of Forest Sciences and Forest Ecology of the Georg-August-University Göttingen to the chair Molecular Wood Biotechnology endowed by the Deutsche Bundesstiftung Umwelt (DBU). Her group studies higher fungi in basic and applied research. Research foci are on mushroom development and on fungal enzymes degrading wood and their applications in wood biotechnology. This book has been edited to thank the DBU for all support given to...

  16. Worldwide correlations of mechanical properties and green wood density.

    Science.gov (United States)

    Niklas, Karl J; Spatz, Hanns-Christof

    2010-10-01

    The density of wood is highly correlated with the ability of stems and roots to resist bending or twisting, which is important for evaluating the mechanical behavior of trees. It also provides a measure of carbon storage, which is an important variable in modeling ecosystem processes and tree construction costs. However, most measurements of the density and mechanical properties of wood have little direct bearing on understanding the biomechanics of living plants because they are based on kiln- or air-dried samples. • Here, we present and analyze the relationships between four important mechanical properties (Young's modulus, the modulus of rupture, and the maximum strength in shearing and in compression) and the density of green wood (i.e., wood at 50% moisture content) from a worldwide, taxonomically broad spectrum of 161 species. • These data indicate that each of the mechanical properties disproportionately increases across species with increasing green wood density, i.e., stems composed of denser green wood are disproportionately stiffer and stronger than stems with equivalent cross-sections composed of less dense green wood. • Although denser wood may have a higher carbon construction cost, the mechanical benefits of denser woods likely outweigh the extra cost.

  17. THE BLENDING EFFECT OF COALITE, COCONUT SHELL CHARCOAL AND GELAM WOOD CHARCOAL ON CALORIFIC VALUE

    OpenAIRE

    Nukman; Riman Sipahutar; Irsyadi Yani; Taufik Arief

    2014-01-01

    The aim of this research is to scrutinize the effect of blend solid fuels consisting of coalite, coconut shell charcoal and gelam wood charcoal on calorific value. Coalite is the solid fuels made from coal that is mined from the earth, while coconuts shell charcoal and gelam wood charcoal are processed from natural plants. Coalite, coconut shell charcoal and gelam wood charcoal are solid fuels which was obtained from carbonization process or pyrolitic process of fuel material. Gelam wood char...

  18. Market review. Pellet wood gasification boiler / combination boiler. 8. ed.; Marktuebersicht. Scheitholzvergaser-/Kombikessel

    Energy Technology Data Exchange (ETDEWEB)

    Uth, Joern

    2012-01-15

    In the market review under consideration on pellet wood gasification boilers and combination boilers, the Federal Ministry of Food, Agriculture and Consumer Protection (Bonn, Federal Republic of Germany) reports on planning and installation of wood-fired heating systems, recommendations regarding to the technical assessment of boiler systems, buffers/combination boilers, prices of pellet wood gasification boilers, data sheets of the compared pellet wood gasification boilers, pellet wood combination boilers, prices of pellet wood combination boilers, data sheets of the compared pellet wood gasification boilers, list of providers.

  19. Pellet wood gasification boiler / Combination boiler. Market review. 7. ed.; Scheitholzvergaser-/Kombikessel. Marktuebersicht

    Energy Technology Data Exchange (ETDEWEB)

    Uth, Joern

    2010-08-15

    In the market review under consideration on pellet wood gasification boilers and combination boilers, the Federal Ministry of Food, Agriculture and Consumer Protection (Bonn, Federal Republic of Germany) report on planning and installation of wood-fired heating systems, recommendations regarding to the technical assessment of boiler systems, buffers/combination boilers, prices of pellet wood gasification boilers, data sheets of the compared pellet wood gasification boilers, pellet wood combination boilers, prices of pellet wood combination boilers, data sheets of the compared pellet wood gasification boilers, list of providers.

  20. Does replacing coal with wood lower CO2 emissions? Dynamic lifecycle analysis of wood bioenergy

    Science.gov (United States)

    Sterman, John D.; Siegel, Lori; Rooney-Varga, Juliette N.

    2018-01-01

    Bioenergy is booming as nations seek to cut their greenhouse gas emissions. The European Union declared biofuels to be carbon-neutral, triggering a surge in wood use. But do biofuels actually reduce emissions? A molecule of CO2 emitted today has the same impact on radiative forcing whether it comes from coal or biomass. Biofuels can only reduce atmospheric CO2 over time through post-harvest increases in net primary production (NPP). The climate impact of biofuels therefore depends on CO2 emissions from combustion of biofuels versus fossil fuels, the fate of the harvested land and dynamics of NPP. Here we develop a model for dynamic bioenergy lifecycle analysis. The model tracks carbon stocks and fluxes among the atmosphere, biomass, and soils, is extensible to multiple land types and regions, and runs in ≈1s, enabling rapid, interactive policy design and sensitivity testing. We simulate substitution of wood for coal in power generation, estimating the parameters governing NPP and other fluxes using data for forests in the eastern US and using published estimates for supply chain emissions. Because combustion and processing efficiencies for wood are less than coal, the immediate impact of substituting wood for coal is an increase in atmospheric CO2 relative to coal. The payback time for this carbon debt ranges from 44–104 years after clearcut, depending on forest type—assuming the land remains forest. Surprisingly, replanting hardwood forests with fast-growing pine plantations raises the CO2 impact of wood because the equilibrium carbon density of plantations is lower than natural forests. Further, projected growth in wood harvest for bioenergy would increase atmospheric CO2 for at least a century because new carbon debt continuously exceeds NPP. Assuming biofuels are carbon neutral may worsen irreversible impacts of climate change before benefits accrue. Instead, explicit dynamic models should be used to assess the climate impacts of biofuels.

  1. The GEFSOC soil carbon modeling system: a tool for conducting regional-scale soil carbon inventories and assessing the impacts of land use change on soil carbon

    NARCIS (Netherlands)

    Easter, M.; Paustian, K.; Killian, K.; Williams, S.; Feng, T.; Al-Adamat, R.; Batjes, N.H.; Bernoux, M.; Bhattacharyya, T.; Cerri, C.C.; Cerri, C.E.P.; Coleman, K.; Falloon, P.; Feller, C.; Gicheru, P.; Kamoni, P.; Milne, E.; Pal, D.K.; Powlson, D.; Rawajfih, Z.; Sessay, M.; Wokabi, S.

    2007-01-01

    The GEFSOC soil carbon modelling system was built to provide interdisciplinary teams of scientists, natural resource managers and policy analysts (who have the appropriate computing skills) with the necessary tools to conduct regional-scale soil carbon (C) inventories. It allows users to assess the

  2. Assemblage composition of fungal wood-decay species has a major influence on how climate and wood quality modify decomposition.

    Science.gov (United States)

    Venugopal, Parvathy; Junninen, Kaisa; Edman, Mattias; Kouki, Jari

    2017-03-01

    The interactions among saprotrophic fungal species, as well as their interactions with environmental factors, may have a major influence on wood decay and carbon release in ecosystems. We studied the effect that decomposer diversity (species richness and assemblage composition) has on wood decomposition when the climatic variables and substrate quality vary simultaneously. We used two temperatures (16 and 21°C) and two humidity levels (70% and 90%) with two wood qualities (wood from managed and old-growth forests) of Pinus sylvestris. In a 9-month experiment, the effects of fungal diversity were tested using four wood-decaying fungi (Antrodia xantha, Dichomitus squalens, Fomitopsis pinicola and Gloeophyllum protractum) at assemblage levels of one, two and four species. Wood quality and assemblage composition affected the influence of climatic factors on decomposition rates. Fungal assemblage composition was found to be more important than fungal species richness, indicating that species-specific fungal traits are of paramount importance in driving decomposition. We conclude that models containing fungal wood-decay species (and wood-based carbon) need to take into account species-specific and assemblage composition-specific properties to improve predictive capacity in regard to decomposition-related carbon dynamics. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  3. Properties of wood-plastic composites (WPCs) reinforced with extracted and delignified wood flour

    Science.gov (United States)

    Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan

    2014-01-01

    The water sorption and mechanical properties of wood-plastic composites (WPCs) made of extracted and delignified wood flour (WF) has been investigated. WF was prepared by extraction with the solvent systems toluene/ethanol (TE), acetone/water (AW), and hot water (HW), and its delignification was conducted by means of sodium chlorite/acetic acid (AA) solution. A 2 4...

  4. Ninth wood energy symposium - Reduction of fine-dust emissions and power generation as part of a future power supply system; 9. Holzenergie-Symposium - Feinstaubminderung und Stromerzeugung im Rahmen der zukuenftigen Energieversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Nussbaumer, T. (ed.)

    2006-07-01

    This comprehensive report is published by the Swiss Federal Office of Energy (SFOE). A total of fourteen papers were presented at the symposium on the following subjects: Federal Action-Plan in the wood-firing area and emission limits, Fair-Firing - an Action Plan for the prevention of increased emissions and illegal incineration of wastes, fine-dust from wood-fired systems in comparison with diesel soot from the health point of view, practical experience with low-particle, pellets-fired systems, basics and technologies for the precipitation of fine-dust and the influence of particle characteristics and mode of operation as well as two papers on the development of electrical precipitators for wood-fired systems from 200 kW upwards and the practical experience gained with them. Further, papers are presented that deal with small-size electrostatic precipitators, flameless combustion for NO{sub x} reduction and modern pellets technology. The potential and economic viability of wood fuels for the generation of electricity are discussed and a 7 MW{sub e} wood-fired power station is looked at. Finally, the options open for providing a secure supply of energy in Europe are discussed and the role to be played by biomass is examined.

  5. Soil-Earthworm-Litter System Controls on the Stabilization of Soil Organic Carbon in Eastern Deciduous Forests

    Science.gov (United States)

    Ma, Y.; Filley, T. R.; Johnston, C. T.; Szlavecz, K. A.; McCormick, M.

    2009-12-01

    Our work seeks to identify how native and invasive earthworm (EW) activity alters the relative importance of physical, chemical, and biochemical protection mechanisms controlling SOM stabilization in deciduous Forests. Within forests of the Smithsonian Environmental Research Center (SERC) in coastal Maryland, USA, wood and litter amendment plots were established in high and low EW activity areas within forests of different stand age and land use history to study EW impacts to litter-soil systems. Our previous work demonstrated that the plant biopolymer chemistry of both decayed litter and soil (0-5 cm) particulate organic matter (POM) is driven by differences in EW activity and is responsible for the differences observed in lignin and root aliphatic matter accumulation in this system. In the present study we compare soils to a depth of 15 cm among plots with 5 years of wood and litter amendment to track the control of EW activity on the vertical transport of litter and clay particle and their partitioning within soil physical fractions. Elemental C&N and δ13C, δ15N data will be presented from each depth in each core among both bulk soil and size-density separated soil fractions. Preliminary results from these analyses indicate the invasive EW feeding habits and activity are the major control on the degree of mixing of surface litter and deep soil in all of research plots. This work will have important implications for understanding how invasive EW will influence soil-atmosphere carbon budget in Northern North America in the future.

  6. Kupier prize lecture: Sources of solar-system carbon

    Science.gov (United States)

    Anders, Edward; Zinner, Ernst

    1994-01-01

    We have tried to deconvolve Solar-System carbon into its sources, on the basis of C-12/C-13 ratios (equivalent to R). Interstellar SiC in meteorites, representing greater than 4.6-Ga-old stardust from carbon stars, is isotopically heavier (bar R = 38 +/- 2) than Solar-System carbon (89), implying that the latter contains an additional, light component. A likely source are massive stars, mainly Type II supernovae and Wolf-Rayet stars, which, being O-rich, eject their C largely as CO rather than carbonaceous dust. The fraction of such light C in the Solar System depends on R(sub light) in the source. For R(sub light) = 180-1025 (as in 'Group 4' meteoritic graphite spherules, which apparently came from massive stars greater than 4.6 Ga ago), the fraction of light C is 0.79-0.61. Similar results are obtained for present-day data on red giants and interstellar gas. Although both have become enriched in C-13 due to galactic evolution (to bar-R = 20 and 57), the fraction of the light component in interstellar gas again is near 0.7. (Here bar R represents the mean of a mixture calculated via atom fractions; it is not identical to the arithmetic mean R). Interstellar graphite, unlike SiC, shows a large peak at R approximately equal 90, near the solar value. Although some of the grains may be of local origin, others show anomalies in other elements and hence are exotic. Microdiamonds, with R = 93, also are exotic on the basis of their Xe and N. Apparently R approximately 90 was a fairly common composition 4.6 Ga ago, of stars as well as the ISM.

  7. Long-term effects of elevated carbon dioxide concentration on sour orange wood specific gravity, modulus of elasticity, and microfibril angle

    Science.gov (United States)

    David Kretschmann; James Evans; Mike Wiemann; Bruce A. Kimball; Sherwood B. Idso

    2007-01-01

    The carbon dioxide (CO2) concentration of Earth’s atmosphere continues to rise. Plants in general are responsive to changing CO2 concentrations, which suggests changes in agricultural productivity in the United States and around the world. The ability of plants to absorb CO2 during photosynthesis and then store carbon in their structure or sequester it in the soil has...

  8. The Thermodynamics of the Carbonate System in Seawater,

    Science.gov (United States)

    1979-03-08

    0.0014 HARNED and OWEN (1958) B(OH)3 148.0248 8966.90 24.4344 0.0027 OWEN (1934); MANov et at. (1944) H 2CO 3 290.9097 14554.21 45.0575 0.0024 HARNED...results give 1958), boric acid (OWEN, 1934: MANOv et al., 1944), Kp(aragonite)/Kp(calcite) = 1.48 + 0.14 at 25 C and and carbonic acid (HARNED and...HARVEY H. W., WATTENBERG H. and GRIPEN- MANOV G. G.. DELoLLIs N. J. and ACREE S. F. (19441 BERG S. (1932) Uber das Kohlensaure-system im Meer

  9. Electronic Structure of Low-Dimensional Carbon Π-Systems

    DEFF Research Database (Denmark)

    García Lastra, Juan Maria; Boukahil, Idris; Qiao, Ruimin

    2016-01-01

    X-ray absorption spectroscopy (XAS) is combined with density functional theory (DFT) to determine the orbitals of one- and two-dimensional carbon Π-systems (lycopene, beta-carotene, retinal, retinol, retinoic acid, coronene, triphenylene). Considerable fine structure is observed for the transition......, and the electron hole interaction. For the latter, we develop a simple model that accurately represents a full Delta-self-consistent field (ΔSCF) calculation. The distortion of the LUMO because of its interaction with the C is hole is investigated. These results illustrate the electronic states of prototypical Π...

  10. Few-hundred GHz carbon nanotube nanoelectromechanical systems (NEMS).

    Science.gov (United States)

    Island, J O; Tayari, V; McRae, A C; Champagne, A R

    2012-09-12

    We study 23-30 nm long suspended single-wall carbon nanotube quantum dots and observe both their stretching and bending vibrational modes. We use low-temperature DC electron transport to excite and measure the tubes' bending mode by making use of a positive feedback mechanism between their vibrations and the tunneling electrons. In these nanoelectromechanical systems (NEMS), we measure fundamental bending frequencies f(bend) ≈ 75-280 GHz and extract quality factors Q ∼ 10(6). The NEMS's frequencies can be tuned by a factor of 2 with tension induced by mechanical breakjunctions actuated by an electrostatic force or tension from bent suspended electrodes.

  11. Zero carbon energy system of South East Europe in 2050

    DEFF Research Database (Denmark)

    Dominkovic, Dominik Franjo; Bačeković, I.; Ćosić, B.

    2016-01-01

    and photovoltaics are the main technologies with shares of 28.9% and 22.5%, followed by hydro power, concentrated solar power, biomass (mainly used in cogeneration units) and geothermal energy sources. To keep the biomass consumption within the sustainability limits, there is a need for some type of synthetic fuel...... the integration of their energy systems is considered to be a challenging task. Large differences between energy mixes, still largely dominated by fossil-fuel consumption, make this task even more demanding.This paper presents the transition steps to a 100% renewable energy system which need to be carried out...... until the year 2050 in order to achieve zero carbon energy society. Novelty of this paper compared to other papers with similar research goals is the assumed sustainable use of biomass in the 100% renewable energy system of the region considered. It is important to emphasize here that only...

  12. Carbon Sequestration and Carbon Markets for Tree-Based Intercropping Systems in Southern Quebec, Canada

    Directory of Open Access Journals (Sweden)

    Kiara S. Winans

    2016-01-01

    Full Text Available Since agriculture directly contributes to global anthropogenic greenhouse gas (GHG emissions, integrating trees into agricultural landscapes through agroforestry systems is a viable adaptive strategy for climate change mitigation. The objective of this study was to evaluate the carbon (C sequestration and financial benefits of C sequestration according to Quebec’s Cap-and-Trade System for Greenhouse Gas Emissions Allowances (C & T System or the Système de plafonnement et d’échange de droits d’émission de gaz à effet de serre du Québec (SPEDE program for two experimental 10-year-old tree-based intercropping (TBI systems in southern Quebec, Canada. We estimated total C stored in the two TBI systems with hybrid poplar and hardwoods and adjacent non-TBI systems under agricultural production, considering soil, crop and crop roots, litterfall, tree and tree roots as C stocks. The C sequestration of the TBI and adjacent non-TBI systems were compared and the market value of the C payment was evaluated using the net present value (NPV approach. The TBI systems had 33% to 36% more C storage than adjacent non-TBI systems. The financial benefits of C sequestration after 10 years of TBI practices amounted to of $2,259–$2,758 CAD ha−1 and $1,568–$1,913 CAD ha−1 for St. Edouard and St. Paulin sites, respectively. We conclude that valorizing the C sequestration of TBI systems could be an incentive to promote the establishment of TBI for the purpose of GHG mitigation in Quebec, Canada.

  13. Urban Wood Waste Resource Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, G.

    1998-11-20

    This study collected and analyzed data on urban wood waste resources in 30 randomly selected metropolitan areas in the United States. Three major categories wood wastes disposed with, or recovered from, the municipal solid waste stream; industrial wood wastes such as wood scraps and sawdust from pallet recycling, woodworking shops, and lumberyards; and wood in construction/demolition and land clearing debris.

  14. Structure and function of wood

    Science.gov (United States)

    Alex C. Wiedenhoeft; Regis B. Miller

    2005-01-01

    Despite the many human uses to which various woods are suited, at a fundamental level wood is a complex biological structure, itself a composite of many chemistries and cell types acting together to serve the needs of the plant. Although humans have striven to understand wood in the context of wood technology, we have often overlooked the key and basic fact that wood...

  15. Dilute phosphoric acid-catalysed hydrolysis of municipal bio-waste wood shavings using autoclave parr reactor system.

    Science.gov (United States)

    Orozco, Angela M; Al-Muhtaseb, Ala'a H; Albadarin, Ahmad B; Rooney, David; Walker, Gavin M; Ahmad, Mohammad N M

    2011-10-01

    The visibility of using municipal bio-waste, wood shavings, as a potential feedstock for ethanol production was investigated. Dilute acid hydrolysis of wood shavings with H₃PO₄ was undertaken in autoclave parr reactor. A combined severity factor (CSF) was used to integrate the effects of hydrolysis times, temperature and acid concentration into a single variable. Xylose concentration reached a maximum value of 17 g/100 g dry mass corresponding to a yield of 100% at the best identified conditions of 2.5 wt.% H₃PO₄, 175 °C and 10 min reaction time corresponding to a CSF of 1.9. However, for glucose, an average yield of 30% was obtained at 5 wt.% H₃PO₄, 200 °C and 10 min. Xylose production increased with increasing temperature and acid concentration, but its transformation to the degradation product furfural was also catalysed by those factors. The maximum furfural formed was 3 g/100 g dry mass, corresponding to the 24% yield. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Wood-fired fuel cells in selected buildings

    Science.gov (United States)

    McIlveen-Wright, D. R.; McMullan, J. T.; Guiney, D. J.

    The positive attributes of fuel cells for high efficiency power generation at any scale and of biomass as a renewable energy source which is not intermittent, location-dependent or very difficult to store, suggest that a combined heat and power (CHP) system consisting of a fuel cell integrated with a wood gasifier (FCIWG) may offer a combination for delivering heat and electricity cleanly and efficiently. Phosphoric acid fuel cell (PAFC) systems, fuelled by natural gas, have already been used in a range of CHP applications in urban settings. Some of these applications are examined here using integrated biomass gasification/fuel cell systems in CHP configurations. Five building systems, which have different energy demand profiles, are assessed. These are a hospital, a hotel, a leisure centre, a multi-residential community and a university hall of residence. Heat and electricity use profiles for typical examples of these buildings were obtained and the FCIWG system was scaled to the power demand. The FCIWG system was modelled for two different types of fuel cell, the molten carbonate and the phosphoric acid. In each case an oxygen-fired gasification system is proposed, in order to eliminate the need for a methane reformer. Technical, environmental and economic analyses of each version were made, using the ECLIPSE process simulation package. Since fuel cell lifetimes are not yet precisely known, economics for a range of fuel cell lifetimes have been produced. The wood-fired PAFC system was found to have low electrical efficiency (13-16%), but much of the heat could be recovered, so that the overall efficiency was 64-67%, suitable where high heat/electricity values are required. The wood-fired molten carbonate fuel cell (MCFC) system was found to be quite efficient for electricity generation (24-27%), with an overall energy efficiency of 60-63%. The expected capital costs of both systems would currently make them uncompetitive for general use, but the specific features

  17. Utilisation of Estonian energy wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Muiste, P.; Tullus, H.; Uri, V. [Estonian Agricultural University, Tartu (Estonia)

    1996-12-31

    In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

  18. Deployment, Design, and Commercialization of Carbon-Negative Energy Systems

    Science.gov (United States)

    Sanchez, Daniel Lucio

    Climate change mitigation requires gigaton-scale carbon dioxide removal technologies, yet few examples exist beyond niche markets. This dissertation informs large-scale implementation of bioenergy with carbon capture and sequestration (BECCS), a carbon-negative energy technology. It builds on existing literature with a novel focus on deployment, design, commercialization, and communication of BECCS. BECCS, combined with aggressive renewable deployment and fossil emission reductions, can enable a carbon-negative power system in Western North America by 2050, with up to 145% emissions reduction from 1990 levels. BECCS complements other sources of renewable energy, and can be deployed in a manner consistent with regional policies and design considerations. The amount of biomass resource available limits the level of fossil CO2 emissions that can still satisfy carbon emissions caps. Offsets produced by BECCS are more valuable to the power system than the electricity it provides. Implied costs of carbon for BECCS are relatively low ( 75/ton CO2 at scale) for a capital-intensive technology. Optimal scales for BECCS are an order of magnitude larger than proposed scales found in existing literature. Deviations from optimal scaled size have little effect on overall systems costs - suggesting that other factors, including regulatory, political, or logistical considerations, may ultimately have a greater influence on plant size than the techno-economic factors considered. The flexibility of thermochemical conversion enables a viable transition pathway for firms, utilities and governments to achieve net-negative CO 2 emissions in production of electricity and fuels given increasingly stringent climate policy. Primary research, development (R&D), and deployment needs are in large-scale biomass logistics, gasification, gas cleaning, and geological CO2 storage. R&D programs, subsidies, and policy that recognize co-conversion processes can support this pathway to commercialization

  19. Chapter 9: Wood Energy

    Science.gov (United States)

    Francisco X. Aguilar; Karen Abt; Branko Glavonjic; Eugene Lopatin; Warren  Mabee

    2016-01-01

    The availabilty of information on wood energy continues to improve, particularly for commoditized woodfuels.  Wood energy consumption and production vary in the UNECE region because demand is strngly affected by weather and the prices of competing energy sources.  There has been an increase in wood energy in the power-and-heat sector in the EU28 and North American...

  20. A Commercialization Roadmap for Carbon-Negative Energy Systems

    Science.gov (United States)

    Sanchez, D.

    2016-12-01

    The Intergovernmental Panel on Climate Change (IPCC) envisages the need for large-scale deployment of net-negative CO2 emissions technologies by mid-century to meet stringent climate mitigation goals and yield a net drawdown of atmospheric carbon. Yet there are few commercial deployments of BECCS outside of niche markets, creating uncertainty about commercialization pathways and sustainability impacts at scale. This uncertainty is exacerbated by the absence of a strong policy framework, such as high carbon prices and research coordination. Here, we propose a strategy for the potential commercial deployment of BECCS. This roadmap proceeds via three steps: 1) via capture and utilization of biogenic CO2 from existing bioenergy facilities, notably ethanol fermentation, 2) via thermochemical co-conversion of biomass and fossil fuels, particularly coal, and 3) via dedicated, large-scale BECCS. Although biochemical conversion is a proven first market for BECCS, this trajectory alone is unlikely to drive commercialization of BECCS at the gigatonne scale. In contrast to biochemical conversion, thermochemical conversion of coal and biomass enables large-scale production of fuels and electricity with a wide range of carbon intensities, process efficiencies and process scales. Aside from systems integration, primarily technical barriers are involved in large-scale biomass logistics, gasification and gas cleaning. Key uncertainties around large-scale BECCS deployment are not limited to commercialization pathways; rather, they include physical constraints on biomass cultivation or CO2 storage, as well as social barriers, including public acceptance of new technologies and conceptions of renewable and fossil energy, which co-conversion systems confound. Despite sustainability risks, this commercialization strategy presents a pathway where energy suppliers, manufacturers and governments could transition from laggards to leaders in climate change mitigation efforts.

  1. Moisture Transport in Wood

    DEFF Research Database (Denmark)

    Astrup, T.; Hansen, K. K.; Hoffmeyer, P.

    2005-01-01

    Modelling of moisture transport in wood is of great importance as most mechanical and physical properties of wood depend on moisture content. Moisture transport in porous materials is often described by Ficks second law, but several observations indicate that this does not apply very well to wood....... Recently at the Technical University of Denmark, Department of Civil Engineering, a new model for moisture transport in wood has been developed. The model divides the transport into two phases, namely water vapour in the cell lumens and bound water in the cell walls....

  2. International Trade of Wood Pellets (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2013-05-01

    The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

  3. Global meta-analysis of wood decomposition rates: a role for trait variation among tree species?

    NARCIS (Netherlands)

    Weedon, J.T.; Cornwell, W.K.; Cornelissen, J.H.C.; Zanne, A.E.; Wirth, C.; Coomes, D.A.

    2009-01-01

    The carbon flux from woody debris, a crucial uncertainty within global carbon-climate models, is simultaneously affected by climate, site environment and species-based variation in wood quality. In the first global analysis attempting to explicitly tease out the wood quality contribution to

  4. A New Energy-Saving Catalytic System: Carbon Dioxide Activation by a Metal/Carbon Catalyst.

    Science.gov (United States)

    Yun, Danim; Park, Dae Sung; Lee, Kyung Rok; Yun, Yang Sik; Kim, Tae Yong; Park, Hongseok; Lee, Hyunjoo; Yi, Jongheop

    2017-09-22

    The conversion of CO 2 into useful chemicals is an attractive method to reduce greenhouse gas emissions and to produce sustainable chemicals. However, the thermodynamic stability of CO 2 means that a lot of energy is required for its conversion into chemicals. Here, we suggest a new catalytic system with an alternative heating system that allows minimal energy consumption during CO 2 conversion. In this system, electrical energy is transferred as heat energy to the carbon-supported metal catalyst. Fast ramping rates allow high operating temperatures (T app =250 °C) to be reached within 5 min, which leads to an 80-fold decrease of energy consumption in methane reforming using CO 2 (DRM). In addition, the consumed energy normalized by time during the DRM reaction in this current-assisted catalysis is sixfold lower (11.0 kJ min -1 ) than that in conventional heating systems (68.4 kJ min -1 ). © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Metagenomic profiling reveals lignocellulose degrading system in a microbial community associated with a wood-feeding beetle.

    Science.gov (United States)

    Scully, Erin D; Geib, Scott M; Hoover, Kelli; Tien, Ming; Tringe, Susannah G; Barry, Kerrie W; Glavina del Rio, Tijana; Chovatia, Mansi; Herr, Joshua R; Carlson, John E

    2013-01-01

    The Asian longhorned beetle (Anoplophoraglabripennis) is an invasive, wood-boring pest that thrives in the heartwood of deciduous tree species. A large impediment faced by A. glabripennis as it feeds on woody tissue is lignin, a highly recalcitrant biopolymer that reduces access to sugars and other nutrients locked in cellulose and hemicellulose. We previously demonstrated that lignin, cellulose, and hemicellulose are actively deconstructed in the beetle gut and that the gut harbors an assemblage of microbes hypothesized to make significant contributions to these processes. While lignin degrading mechanisms have been well characterized in pure cultures of white rot basidiomycetes, little is known about such processes in microbial communities associated with wood-feeding insects. The goals of this study were to develop a taxonomic and functional profile of a gut community derived from an invasive population of larval A. glabripennis collected from infested host trees and to identify genes that could be relevant for the digestion of woody tissue and nutrient acquisition. To accomplish this goal, we taxonomically and functionally characterized the A. glabripennis midgut microbiota through amplicon and shotgun metagenome sequencing and conducted a large-scale comparison with the metagenomes from a variety of other herbivore-associated communities. This analysis distinguished the A. glabripennis larval gut metagenome from the gut communities of other herbivores, including previously sequenced termite hindgut metagenomes. Genes encoding enzymes were identified in the A. glabripennis gut metagenome that could have key roles in woody tissue digestion including candidate lignin degrading genes (laccases, dye-decolorizing peroxidases, novel peroxidases and β-etherases), 36 families of glycoside hydrolases (such as cellulases and xylanases), and genes that could facilitate nutrient recovery, essential nutrient synthesis, and detoxification. This community could serve as a

  6. Metagenomic profiling reveals lignocellulose degrading system in a microbial community associated with a wood-feeding beetle.

    Directory of Open Access Journals (Sweden)

    Erin D Scully

    Full Text Available The Asian longhorned beetle (Anoplophoraglabripennis is an invasive, wood-boring pest that thrives in the heartwood of deciduous tree species. A large impediment faced by A. glabripennis as it feeds on woody tissue is lignin, a highly recalcitrant biopolymer that reduces access to sugars and other nutrients locked in cellulose and hemicellulose. We previously demonstrated that lignin, cellulose, and hemicellulose are actively deconstructed in the beetle gut and that the gut harbors an assemblage of microbes hypothesized to make significant contributions to these processes. While lignin degrading mechanisms have been well characterized in pure cultures of white rot basidiomycetes, little is known about such processes in microbial communities associated with wood-feeding insects. The goals of this study were to develop a taxonomic and functional profile of a gut community derived from an invasive population of larval A. glabripennis collected from infested host trees and to identify genes that could be relevant for the digestion of woody tissue and nutrient acquisition. To accomplish this goal, we taxonomically and functionally characterized the A. glabripennis midgut microbiota through amplicon and shotgun metagenome sequencing and conducted a large-scale comparison with the metagenomes from a variety of other herbivore-associated communities. This analysis distinguished the A. glabripennis larval gut metagenome from the gut communities of other herbivores, including previously sequenced termite hindgut metagenomes. Genes encoding enzymes were identified in the A. glabripennis gut metagenome that could have key roles in woody tissue digestion including candidate lignin degrading genes (laccases, dye-decolorizing peroxidases, novel peroxidases and β-etherases, 36 families of glycoside hydrolases (such as cellulases and xylanases, and genes that could facilitate nutrient recovery, essential nutrient synthesis, and detoxification. This community

  7. Modeling economic and carbon consequences of a shift to wood-based energy in a rural 'cluster'; a network analysis in southeast Alaska

    Science.gov (United States)

    David Saah; Trista Patterson; Thomas Buchholz; David Ganz; David Albert; Keith. Rush

    2014-01-01

    Integrated ecological and economic solutions are increasingly sought after by communities to provide basic energy needs such as home heating, transport, and electricity, while reducing drivers of and vulnerability to climate change. Small rural communities may require a coordinated approach to overcome the limitations of economies of scale. Low-carbon development...

  8. Highly stable beta-class carbonic anhydrases useful in carbon capture systems

    Science.gov (United States)

    Alvizo, Oscar; Benoit, Mike; Novick, Scott

    2013-04-16

    The present disclosure relates to .beta.-class carbonic anhydrase polypeptides having improved properties including increased thermostability and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides formulations and uses of the polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering. Also provided are polynucleotides encoding the carbonic anhydrase polypeptides and host cells capable of expressing them.

  9. Highly stable beta-class carbonic anhydrases useful in carbon capture systems

    Energy Technology Data Exchange (ETDEWEB)

    Alvizo, Oscar; Benoit, Michael R; Novick, Scott J

    2013-08-20

    The present disclosure relates to .beta.-class carbonic anhydrase polypeptides having improved properties including increased thermostability and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides formulations and uses of the polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering. Also provided are polynucleotides encoding the carbonic anhydrase polypeptides and host cells capable of expressing them.

  10. Carbon-Based Regenerable Sorbents for the Combined Carbon Dioxide and Ammonia Removal for the Primary Life Support System (PLSS)

    Science.gov (United States)

    Wojtowicz, Marek A.; Cosgrove, Joseph E.; Serio, Michael A.; Manthina, Venkata; Singh, Prabhakar; Chullen, Cinda

    2014-01-01

    Results are presented on the development of reversible sorbents for the combined carbon dioxide and trace-contaminant (TC) removal for use in Extravehicular Activities (EVAs). Since ammonia is the most important TC to be captured, data on TC sorption presented in this paper are limited to ammonia, with results relevant to other TCs to be reported at a later time. The currently available life support systems use separate units for carbon dioxide, trace contaminants, and moisture control, and the long-term objective is to replace the above three modules with a single one. Furthermore, the current TC-control technology involves the use of a packed bed of acid-impregnated granular charcoal, which is non-regenerable, and the carbon-based sorbent under development in this project can be regenerated by exposure to vacuum at room temperature. The objective of this study was to demonstrate the feasibility of using carbon sorbents for the reversible, concurrent sorption of carbon dioxide and ammonia. Several carbon sorbents were fabricated and tested, and multiple adsorption/vacuum-regeneration cycles were demonstrated at room temperature, and also a carbon surface conditioning technique that enhances the combined carbon dioxide and ammonia sorption without impairing sorbent regeneration.

  11. X-ray initiated polymerization of wood impregnants

    Science.gov (United States)

    Cleland, Marshall R.; Galloway, Richard A.; Berejka, Anthony J.; Montoney, Daniel; Driscoll, Mark; Smith, Leonard; Scott Larsen, L.

    2009-07-01

    X-rays, derived from a high energy, high-current electron beam (EB), initiated in-situ polymerization of a unique class of monomers that were found to penetrate the cell walls of wood. X-rays initiated an auto-catalytic acrylic polymerization and penetrated through thick pieces of wood. The final cured product having the polymerizate, a polymer, both in the wood cell lumens and in the cell walls is called wood impregnated with a wood-polymer penetrant (WPP). The controlled lower dose rate of X-rays overcame disproportionation encountered when using higher dose-rate electron beam initiation. With X-rays, the in-situ polymerization took place in one exposure of modest dose. With EB, multiple passes were needed to avoid excessive heat build-up and monomer volatilization. Having entered the cell walls of the wood and then being polymerized within the cell walls, these radiation-cured unique monomers imparted outstanding dimensional stability upon exposure of the impregnated wood to humidity cycling. The preferred monomer system was also chemically modified prior to impregnation with agents that would remain in the wood and prevent the growth of fungi and other microbials. This technique differs from historic uses of monomers that merely filled the lumens of the wood (historic wood-polymer composites), which are only suitable for indoor use. The WPP impregnated wood that was either X-ray cured or EB cured demonstrated enhanced structural properties, dimensional stability, and decay resistance.

  12. Least-cost allocation strategies for wood fuel supply for distributed generation in Denmark

    DEFF Research Database (Denmark)

    Möller, Bernd

    2004-01-01

    The article presents a study of geographical information system (GIS) for allocating forest wood chips resources to energy plants.......The article presents a study of geographical information system (GIS) for allocating forest wood chips resources to energy plants....

  13. Onsite defluoridation system for drinking water treatment using calcium carbonate.

    Science.gov (United States)

    Wong, Elaine Y; Stenstrom, Michael K

    2017-08-28

    Fluoride in drinking water has several effects on teeth and bones. At concentrations of 1-1.5 mg/L, fluoride can strengthen enamel, improving dental health, but at concentrations above 1.5 to 4 mg/L can cause dental fluorosis. At concentrations of 4-10 mg/L, skeletal fluorosis can occur. There are many areas of the world that have excessive fluoride in drinking water, such as China, India, Sri Lanka, and the Rift Valley countries in Africa. Treatment solutions are needed, especially in poor areas where drinking water treatment plants are not available. On-site or individual treatment alternatives can be attractive if constructed from common materials and if simple enough to be constructed and maintained by users. Advanced on-site methods, such as under sink reserve osmosis units, can remove fluoride but are too expensive for developing areas. This paper investigates calcium carbonate as a cost effective sorbent for an onsite defluoridation drinking water system. Batch and column experiments were performed to characterize F - removal properties. Fluoride sorption was described by a Freundlich isotherm model, and it was found that the equilibrium time was approximately 3 h. Calcium carbonate was found to have comparable F - removal abilities as the commercial ion exchange resins and possessed higher removal effectiveness compared to calcium containing eggshells and seashells. It was also found that the anion Cl- did not compete with F - at typical drinking water concentrations, having little impact on the effectiveness of the treatment system. A fluoride removal system is proposed that can be used at home and can be maintained by users. Through this work, we can be a step closer to bringing safe drinking water to those that do not have access to it. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Development of an engineering system for unburned carbon prediction

    Energy Technology Data Exchange (ETDEWEB)

    Javier Pallares; Inmaculada Arauzo; Enrique Teruel [University of Zaragoza, Zaragoza (Spain). Centre of Research for Energy Resources and Consumption (CIRCE)

    2009-01-15

    Within the computational methods used for the prediction of unburned carbon, coal combustion kinetics models, generally developed from the study of the real combustion process in experimental facilities, has the advantage to simulate the coal combustion process in a very realistic way. However, these models need the fluid and thermal behaviour in the boiler, which is usually obtained from simplified zonal approaches. The other group of models, namely CFD codes, present the opposite features. That is, they give a detailed description of the thermal and fluid dynamics behaviour in the boiler, but they use simple combustion models that cannot be used for a quantitative burnout determination. Moreover, the computing cost can be high and cannot be implemented in an on-line predictive system. The predictive system developed in this work has the same structure as the so-called combustion kinetics models; however, it obtains the fluid and thermal description through CFD simulations. To solve the handicap of the high computational cost needed to run a CFD simulation, a neural network system is used to reproduce the solutions given by the CFD code. Moreover, a neural network system permits to interpolate in the range of variation used during the training stage, and thus, a predictive system covering the whole operational range of the plant can be obtained. Results from the predictive system have been compared against those gathered at Lamarmora power plant (ASM Brescia, Italy), after carrying out a statistical study for validating and determining the prediction capability of the system. The comparison of both sets of data permits to conclude that the system predicts reasonably well over the whole range of operating conditions of the study plant. 10 refs., 7 figs., 2 tabs.

  15. Wood fuel markets in Northern Europe. Price formation and internationalization

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, Olle

    2012-07-01

    unrefined wood fuel markets still are mainly national, wood pellet markets are becoming internationalized. As for external impacts on wood fuel prices, the influence of forest products markets seem hitherto have been more important than oil price fluctuations. Wood fuels can be an important part of the future European energy system, but the complexities of the markets must be understood more thoroughly to ensure efficient resource utilization.

  16. [Effects of carbon disulfide on cardiovascular system of workers occupationally exposed to carbon disulfide].

    Science.gov (United States)

    Li, Kui-rong; Wang, Si-hua; Wang, Jing; Su, Dong-mei; Gu, Gui-zhen; Cui, Shou-ming; Yu, Shan-fa

    2012-06-01

    To study the effects of long-term exposure to carbon disulfide (SC(2)) on cardiovascular system of workers. The concentrations of CS(2) were detected in the representative workshops with different exposure levels. The indicators related to cardiovascular system were tested in 633 workers occupationally exposed to CS(2), which included blood pressure, electrocardiogram, blood routine (blood RT), cholesterol (TCHO), triglyceride (TG) and so on. The data were analyzed by chi-square test and multiple logistic regression analysis. The exposure concentration of CS(2) for 389 workers was less than or equal to 5 mg/m(3), which for other 244 workers was higher than 5 mg/m(3). The maximum exposure concentration of CS(2) was 15.73 mg/m(3). There were no significant effects of CS(2) on the electrocardiogram, red blood cells, white blood cells, blood platelet, TCHO and TG of workers. However, the positive effects of CS(2) on blood pressure and negative effects of CS(2) on hemoglobin were found. The rates of high TCHO, TG and hypertension in male workers were significantly higher than those in female workers (P 30 years old) (P cardiovascular system of workers.

  17. Terawatt laser system irradiation of carbon/tungsten bilayers

    Energy Technology Data Exchange (ETDEWEB)

    Lungu, C.P.; Marcu, A.; Porosnicu, C.; Jepu, I.; Lungu, A.M.; Chiru, P.; Luculescu, C.; Banici, R.; Ursescu, D.; Dabu, R. [National Institute for Laser, Plasma and Radiation Physics, 077125 Bucharest (Romania); Feraru, I.D.; Grigorescu, C.E.A. [National Institute R and D for Optoelectronics, INOE 2000, 077125 Bucharest (Romania); Iacobescu, G.; Osiac, M. [University of Craiova, Faculty of Physics, Craiova 200585 (Romania); Kovac, J. [Institute (JSI), Jamova 39, 1000 Ljubljana (Slovenia); Center of Excellence for Polymer Materials and Technologies, 1000 Ljubljana (Slovenia); Nemanic, V. [Institute (JSI), Jamova 39, 1000 Ljubljana (Slovenia); Hinkov, I. [Center of Excellence for Polymer Materials and Technologies, 1000 Ljubljana (Slovenia); Farhat, S.; Gicquel, A.; Brinza, O. [Laboratoire des Sciences des Materiaux et des Procedes, LSPM, Universite Paris 13, 93430 Villetaneuse (France)

    2012-09-15

    Using the original thermionic vacuum arc method (TVA), carbon films with the thickness of about 2500 nm were coated on top of 200 nm tungsten films deposited on fine grain graphite substrates. The carbon/tungsten bilayers were irradiated using a terawatt laser system (TEWALAS), 360 ps and 100 fs pulse duration, 110-150 mJ pulse energy. The analysis of the selected area electron diffraction (SAED) pattern allowed the identification of rhomboedral structures corresponding to diamond. The Raman scattering measurements were also performed on the produced craters and the specific peak at 1330 cm{sup -1} corresponding to diamond was observed. The C-C sp{sup 3} bonding content increased to 39.4% in the irradiated region compared to 30.8% in the ''as deposited'' zone, as shown by XPS. The craters produced by the laser irradiation were morphologically studied using optical imaging and scanning electron microscopy. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Emission characteristics of modern and old-type residential boilers fired with wood logs and wood pellets

    Science.gov (United States)

    Johansson, Linda S.; Leckner, Bo; Gustavsson, Lennart; Cooper, David; Tullin, Claes; Potter, Annika

    Emissions from commercial residential boilers fired with wood logs and wood pellets, have been compared. Seven boilers, selected with respect to age, design, connection to heat storage tank, and type of biofuel, were included in the study, which also covers two oil-fired boilers in comparison. The measurements of gaseous emissions comprised carbon monoxide (CO), carbon dioxide (CO 2), oxygen (O 2), total organic carbons (TOC), nitrogen oxides (NO x), polycyclic aromatic hydrocarbons (PAH), and 33 volatile organic compounds (VOC). Particle emissions were characterised by mass concentration, number concentration, and the corresponding particle size distributions. In general, old-type wood boilers caused considerably higher emissions than modern wood and pellet boilers. The mass concentration of particles was 180 times larger in the worst old-type case (a water-cooled wood boiler without heat storage tank) compared to the best modern case (wood pellets). The TOC emission was shown to be correlated to the CO emission, both ranging between very low values and up to 10 000 mg/MJ, depending on design and operation. The highest emissions of unoxidised compounds occurred at the highest excess air ratio, and oxygen was not the limiting parameter for poor combustion. Instead, high excess air can be suspected to cool the combustion chamber, resulting in high CO emissions. VOC was dominated by methane. Especially from an old-type boiler the methane emissions could be high and the effect on climate change then may become larger than that of an oil boiler. However, substitution of an old-type wood boiler with a modern wood boiler attached to a storage tank or with a pellet boiler, would reduce methane emissions by 8 to 9000 times and the efficiency would increase. Most emissions could be considerably lowered by connecting the old-type wood boiler to a heat storage tank, or by charging small (in relation to the combustion chamber) batches of wood.

  19. Heat sterilization of wood

    Science.gov (United States)

    Xiping Wang

    2010-01-01

    Two important questions should be considered in heat sterilizing solid wood materials: First, what temperature–time regime is required to kill a particular pest? Second, how much time is required to heat the center of any wood configuration to the kill temperature? The entomology research on the first question has facilitated the development of international standards...

  20. Wood supply and demand

    Science.gov (United States)

    Peter J. Ince; David B. McKeever

    2011-01-01

    At times in history, there have been concerns that demand for wood (timber) would be greater than the ability to supply it, but that concern has recently dissipated. The wood supply and demand situation has changed because of market transitions, economic downturns, and continued forest growth. This article provides a concise overview of this change as it relates to the...

  1. Arbuscular Mycorrhizal Fungi and Glomalin Enhance Carbon Sequestration in Organic Farming Systems

    Science.gov (United States)

    Atmospheric carbon dioxide concentrations have increased nearly 100 ppm in the last 250 years. Soils may be able to mitigate this by sequestering carbon, but agricultural soils are often a source rather than a sink for carbon. The Rodale Institute’s Farming Systems Trial® (FST), initiated in 1981 ...

  2. Wood biomass potentials in Brandenburg - growing competition between industry timber and energy wood

    Energy Technology Data Exchange (ETDEWEB)

    Sasse, D. (CEBra - Centre for Energy Technology Brandenburg GmbH, Cottbus (Germany)); Laufer, S. (University of Applied Sciences Eberswalde (Germany))

    2007-07-01

    The paper presents a survey of dramatic timber market developments in recent years. It shows the significant increase of wood processing capacities in Brandenburg and neighbouring regions and the expansion of the wood energy branch at the same time which fostered a growing competition between the industrial and energetic use of wood. The comparison between the annual timber consumption and the annual timber yield potential in Brandenburg forests reflects a widening gap which cannot be covered by conventional means of forestry management. This gap amounted to 1 million m3 in 2006 and will probably double in 2007. Rapidly growing is the importance of wood from short rotation coppices on agricultural set-aside fields and former open cast mining areas. The development of alternative land use systems for the sustainable production of energy wood is a main focus of several R and D projects in Brandenburg. (orig.)

  3. NOS module - reducing the nitrogen oxides and dust emissions of wood-fired systems; NOS-Modul. Installation und Test - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Salerno, B.

    2005-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined the potential of reducing dust and nitrogen oxides emissions of biomass-fired systems. Two prototype installations are described with capacities of 70 - 300 kW and 150 - 500 kW, the latter being a mobile installation installed together with a silo in a container. The prototypes can burn problematical biomass such as cereals, chicken droppings, damp wood-chippings and straw. Various factors and configurations influencing the formation of emissions are examined. Cyclone technology, a catalyst using chrome-nickel shavings and a ceramic heat-exchanger are discussed. Measurements made are presented in tabular and graphical form and discussed.

  4. Complex geometries in wood

    DEFF Research Database (Denmark)

    Tamke, Martin; Ramsgaard Thomsen, Mette; Riiber Nielsen, Jacob

    2009-01-01

    The versatility of wood constructions and traditional wood joints for the production of non standard elements was in focus of a design based research. Herein we established a seamless process from digital design to fabrication. A first research phase centered on the development of a robust parame...... parametric model and a generic design language a later explored the possibilities to construct complex shaped geometries with self registering joints on modern wood crafting machines. The research was carried out as collaboration with industrial partners.......The versatility of wood constructions and traditional wood joints for the production of non standard elements was in focus of a design based research. Herein we established a seamless process from digital design to fabrication. A first research phase centered on the development of a robust...

  5. Sol-gel modification of wood substrates to retard weathering

    Science.gov (United States)

    Mandla A Tshabalala; Sam Williams

    2008-01-01

    Wood specimens were treated with sol-gel systems based on metalorganic precursors of silicon (Si), iron (Fe), zirconium (Zr), and titanium (Ti). The effect of these sol-gel systems on weathering properties of wood was investigated. These sol-gel systems were found to have a positive effect on surface color stability and water vapor resistance of the specimens. Under...

  6. Analysis of the carbon footprint of coastal protection systems

    NARCIS (Netherlands)

    Labrujere, A.L.; Verhagen, H.J.

    2012-01-01

    When calculating the Carbon Footprint for a product or service, a direct link is made between the total amount of consumed energy and the produced amount of carbon dioxide during production. For that reason calculating the carbon footprint of various alternatives is a very straightforward method to

  7. Studies on carbon dioxide system in central Arabian sea

    Digital Repository Service at National Institute of Oceanography (India)

    AnilKumar, N.; Singbal, S.Y.S.

    Data on pH and total alkalinity have been utilised in the study of carbon dioxide and its species in Central Arabian Sea Total carbon dioxide and partial pressure of carbon dioxide remain fairly constant in the upper layers but increase...

  8. Carbon nanotubes as nanodelivery systems an insight through molecular dynamics simulations

    CERN Document Server

    Lim, Melvin Choon Giap

    2013-01-01

    This book showcases the application of carbon nanotubes as nanodelivery systems for copper atoms, using molecular dynamics simulations as a means of investigation. The nanodelivery system of the carbon nanotube presents the possible usage of the carbon structure in many areas in the future. This book is comprehensive and informative, and serves as a guide for any reader who wishes to perform a molecular dynamics simulation of his own and to conduct an analytical study of a molecular system.

  9. Non-invasive measurement of carbon monoxide burden in Guatemalan children and adults following wood-fired temazcal (sauna-bath) use.

    Science.gov (United States)

    Lam, Nick; Nicas, Mark; Ruiz-Mercado, Ilse; Thompson, Lisa M; Romero, Carolina; Smith, Kirk R

    2011-08-01

    The use of wood-fired steam baths, or temazcales, is a potentially dangerous source of CO exposure in Guatemalan Highland communities where adults and children use them regularly for bathing, relaxation, and healing purposes. Physical characteristics of children predispose them to absorb CO faster than adults, placing them at greater exposure and health risks. Efforts to quantify temazcal exposures across all age groups, however, have been hampered by the limitations in exposure measurement methods. In this pilot study we measured COHb levels in children and adults following use of the temazcal using three field-based, non-invasive CO measurement methods: CO-oximetry, exhaled breath, and by estimation of COHb using micro-environmental concentrations and time diaries. We then performed a brief comparison of methods. Average CO concentrations measured during temazcal use were 661 ± 503 ppm, approximately 10 times the 15 min WHO guideline. Average COHb levels for all participants ranged from 12-14% (max of 30%, min 2%), depending on the method. COHb levels measured in children were not significantly different from adults despite the fact that they spent 66% less time exposed. COHb measured by CO-oximetry and exhaled breath had good agreement, but precision of the former was affected substantially by random instrument error. The version of the field CO-oximeter device used in this pilot could be useful in screening for acute CO exposure events in children but may lack the precision for monitoring the burden from less extreme, but more day-to-day CO exposures (e.g. indoor solid fuel use). In urban settings, health effects in children and adults have been associated with chronic exposure to ambient CO concentrations much lower than measured in this study. Future research should focus on reducing exposure from temazcales through culturally appropriate modifications to their design and practices, and targeted efforts to educate communities on the health risks they pose

  10. Application of denitrifying wood chip bioreactors for management of residential non-point sources of nitrogen.

    Science.gov (United States)

    Lopez-Ponnada, E V; Lynn, T J; Peterson, M; Ergas, S J; Mihelcic, J R

    2017-01-01

    Two important and large non-point sources of nitrogen in residential areas that adversely affect water quality are stormwater runoff and effluent from on-site treatment systems. These sources are challenging to control due to their variable flow rates and nitrogen concentrations. Denitrifying bioreactors that employ a lignocellulosic wood chip medium contained within a saturated (anoxic) zone are relatively new technology that can be implemented at the local level to manage residential non-point nitrogen sources. In these systems, wood chips serve as a microbial biofilm support and provide a constant source of organic substrate required for denitrification. Denitrifying wood chip bioreactors for stormwater management include biofilters and bioretention systems modified to include an internal water storage zone; for on-site wastewater, they include upflow packed bed reactors, permeable reactive barriers, and submerged wetlands. Laboratory studies have shown that these bioreactors can achieve nitrate removal efficiencies as high as 80-100% but could provide more fundamental insight into system design and performance. For example, the type and size of the wood chips, hydraulic loading rate, and dormant period between water applications affects the hydrolysis rate of the lignocellulosic substrate, which in turn affects the amount and bioavailability of dissolved organic carbon for denitrification. Additional field studies can provide a better understanding of the effect of varying environmental conditions such as ambient temperature, precipitation rates, household water use rates, and idle periods on nitrogen removal performance. Long-term studies are also essential for understanding operations and maintenance requirements and validating mathematical models that integrate the complex physical, chemical, and biological processes occurring in these systems. Better modeling tools could assist in optimizing denitrifying wood chip bioreactors to meet nutrient reduction

  11. 46 CFR 167.45-1 - Steam, carbon dioxide, and halon fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Steam, carbon dioxide, and halon fire extinguishing....45-1 Steam, carbon dioxide, and halon fire extinguishing systems. (a) General requirements. (1...-extinguishing system. On such vessels contracted for prior to January 1, 1962, a steam smothering system may be...

  12. 75 FR 8431 - Carbon Dioxide Fire Suppression Systems on Commercial Vessels

    Science.gov (United States)

    2010-02-24

    ...--Marine engineering, vital 62.25-20. systems automation. 71, 76, 78--Subchapter H 71.20-20, 71.25-20, 71... tested and marked, and all flexible connections on fixed carbon dioxide systems must be tested or renewed... Homeland Security Coast Guard 46 Parts 25, 27, 28, et al. Carbon Dioxide Fire Suppression Systems on...

  13. Graded Density Carbon Bonded Carbon Fiber (CBCF) Preforms for Lightweight Ablative Thermal Protection Systems (TPS) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — FMI has developed graded density CBCF preforms for graded density phenolic impregnated carbon ablator (PICA) material to meet NASA's future exploration mission...

  14. Microstructure of wood charcoal prepared by flash heating

    NARCIS (Netherlands)

    Kurosaki, F; Ishimaru, K; Hata, T; Bronsveld, P; Kobayashi, E; Imamura, Y

    2003-01-01

    Carbonized wood prepared by flash heating at 800 degreesC for I h shows a different microstructure and surface chemical structure than char formed after slow heating at 4 degreesC/min to 800 degreesC for I h. Flash heating produces pores that are surrounded by aggregates of carbon structures 25 to

  15. Henna wood as an adsorptive material for bentazon | Mounaouer ...

    African Journals Online (AJOL)

    In this study, the efficiency of activated carbon produced from Henna wood was studied to remove herbicide from aqueous solutions by adsorption. The parameters that affect the adsorption such as contact time, activated carbon dosage, initial concentration of adsorbate, stirring rate, temperature, and pH on bentazon ...

  16. Cord Wood Testing in a Non-Catalytic Wood Stove

    Energy Technology Data Exchange (ETDEWEB)

    Butcher, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Trojanowski, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wei, G. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2014-06-30

    EPA Method 28 and the current wood stove regulations have been in-place since 1988. Recently, EPA proposed an update to the existing NSPS for wood stove regulations which includes a plan to transition from the current crib wood fuel to cord wood fuel for certification testing. Cord wood is seen as generally more representative of field conditions while the crib wood is seen as more repeatable. In any change of certification test fuel, there are questions about the impact on measured results and the correlation between tests with the two different fuels. The purpose of the work reported here is to provide data on the performance of a noncatalytic stove with cord wood. The stove selected has previously been certified with crib wood which provides a basis for comparison with cord wood. Overall, particulate emissions were found to be considerably higher with cord wood.

  17. Automated Quantification of the Impact of the Wood-decay fungus Physisporinus vitreus on the Cell Wall Structure of Norway spruce by Tomographic Microscopy

    OpenAIRE

    Fuhr, M. J.; Stührk, C.; Münch, B.; Schwarze, F. W. M. R.; Schubert, M

    2011-01-01

    Wood-decay fungi decompose their substrate by extracellular, degradative enzymes and play an important role in natural ecosystems by recycling carbon and minerals fixed in plants. Thereby, they cause significant damage to the wood structure and limit the use of wood as building material. Besides their role as biodeteriorators wood-decay fungi can be used for biotechnological purposes, e.g. the white-rot fungus Physisporinus vitreus for improving the uptake of preservatives and wood-modificati...

  18. Total Ecosystem Carbon Stock

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Total ecosystem carbon includes above- and below-ground live plant components (such as leaf, branch, stem and root), dead biomass (such as standing dead wood, down...

  19. Chapter 6: Wood energy and competing wood product markers

    Science.gov (United States)

    Kenneth E. Skog; Robert C. Abt; Karen Abt

    2014-01-01

    Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

  20. Structure and Function of Wood

    Science.gov (United States)

    Alex C. Wiedenhoeft

    2012-01-01

    Wood is a complex biological structure, a composite of many cell types and chemistries acting together to serve the needs of living plant. Attempting to understand wood inthe context of wood technology, we have often overlooked the basic fact that wood evolved over the course of millions of years to serve three main functions in plants-conduction of water from the...