WorldWideScience

Sample records for wood caracterizacao estrutural

  1. OSBRA right of way characterization in Vila Estrutural, Brasilia, Brazil; Caracterizacao de faixa do OSBRA na Vila Estrutural em Brasilia - evidencia de uma nova relacao da TRANSPETRO com a comunidade

    Energy Technology Data Exchange (ETDEWEB)

    Brito, Walderes Lima de; Castro, Newton Camelo de [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil); Braga, Gilberto Vieira [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2005-07-01

    In this project we will introduce the relationship experience between TRANSPETRO and Vila Estrutural community, located in Guara, D.C., what we consider a social responsibility practice and an important tool of the integrity maintenance of right of way pipelines, considering the risks caused by other people actions. In this specific case, Vila Estrutural is the most critical one, of Sao Paulo - Brasilia pipelines (OSBRA): irregular occupations, with an estimated population by 25,000 people, with an inhabit strangle and development constructions tendency in the straight ahead direction of pipelines. To deal with this reality, OSBRA management created a strategy called 'Acquaintance Communication', increasing the knowledge about the community (diagnostic), promoting to yours employees an acquaintance culture (qualifying); developing communications strategies with those that live nearby right of the pipelines way (relationship); and finally, building the stonemason of the characterization of the right of way pipelines as a real device and right of the way protection (framing). This work is lined up with the idea of an integrated communication, using many strategies (visits, meetings, argument groups, etc.), constituting in a corporative social responsibility practice, admitting the community right of information and knowing it the right manner of living nearby the right of way pipeline, resulting in the equipment integrity, asserting the community safety and environment maintenance. (author)

  2. Extraction and characterization of cellulose nano whiskers from balsa wood; Extracao e caracterizacao de nanocristais de celulose obtidos da madeira balsa

    Energy Technology Data Exchange (ETDEWEB)

    Morelli, Carolina L.; Bretas, Rosario E.S., E-mail: bretas@ufscar.br [Universidade Federal de Sao Carlos - UFSCar, Sao Carlos, SP (Brazil); Marconcini, Jose M. [Embrapa Instrumentacao, Sao Carlos, SP (Brazil); Pereira, Fabiano V. [Universidade Federal de Minas Gerais - UFMG, Belo Horizonte, MG (Brazil); Branciforti, Marcia C. [Universidade de Sao Paulo - USP, Sao Carlos, SP (Brazil)

    2011-07-01

    In this study cellulose nano whiskers were obtained from balsa wood. For this purpose, fibers of balsa wood were subjected to hydrolysis reactions for lignin and hemi cellulose digestion and acquisition of nano-scale cellulose. Cellulose nano crystals obtained had medium length and thickness of 176 nm and 7 nm respectively. Infrared spectroscopy and x-ray diffraction showed that the process used for extracting nano whiskers could digest nearly all the lignin and hemi cellulose from the balsa fiber and still preserve the aspect ratio and crystallinity, satisfactory enough for future application in polymer nano composites. Thermogravimetry showed that the onset temperature of thermal degradation of cellulose nano crystals (226 degree C) was higher than the temperature of the balsa fiber (215 degree C), allowing its use in molding processes with many polymers from the molten state.(author)

  3. Análise da madeira do Pinus oocarpa parte II: caracterização estrutural da lignina de madeira moída Chemical analysis of the Pinus oocarpa wood. Part II: characterization of the milled wood lignin

    Directory of Open Access Journals (Sweden)

    Sérgio Antônio Lemos de Morais

    2005-06-01

    Full Text Available Este estudo caracterizou a Lignina de Madeira Moída (LMM proveniente de Pinus oocarpa cultivado na região do Cerrado brasileiro. A LMM foi isolada e analisada por meio das espectrometrias no infravermelho com transformada de Fourier (IVTF, de ressonância magnética nuclear do próton e carbono-13 e por intermédio de métodos químicos de análise por via úmida. A LMM apresentou uma fórmula mínima igual a C9H9,2O2,6(OCH 30,8 e massas molares médias em massa (Mw e numérica (Mn de 3.969 e 1.133 Da, respectivamente. A LMM dessa madeira se enquadra dentro das ligninas típicas de coníferas.This work presents the characterization of the milled wood lignin (MWL of the Pinus oocarpa cultivated in the Brazilian cerrado. FTIR, carbon-13 and proton NMR spectroscopies as well as wet chemical methods were used. The established C9 unit formula for MWL was C9H9,2O2,6(OCH 30,8 and its relative molecular weights (Mw and (Mn were 3969 and 1133 Da, respectively. Pinus oocarpa MWL was typical of softwood lignins.

  4. Wood

    DEFF Research Database (Denmark)

    Unterrainer, Walter

    2014-01-01

    is a renewable resource makes it predestinated for what is considered ´sustainable architecture´. But the reality is less linear and there are serious traps: In fact the lecture shows by examples that it is much easier to build very unsustainable buildings in wood than the other way round! Where does the wood...

  5. Wood

    Science.gov (United States)

    David W. Green; Robert H. White; Antoni TenWolde; William Simpson; Joseph Murphy; Robert J. Ross; Roland Hernandez; Stan T. Lebow

    2006-01-01

    Wood is a naturally formed organic material consisting essentially of elongated tubular elements called cells arranged in a parallel manner for the most part. These cells vary in dimensions and wall thickness with position in the tree, age, conditions of growth, and kind of tree. The walls of the cells are formed principally of chain molecules of cellulose, polymerized...

  6. DIVERSIDADE ESTRUTURAL EM Eugenia L. (MYRTACEAE

    Directory of Open Access Journals (Sweden)

    Sidinei Rodrigues dos Santos

    2014-01-01

    Full Text Available The wood anatomy of nine species of Eugenia (Myrtaceae native in Rio Grande do Sul State (Brazil is presently studied in order to identify diagnostic characters useful to identify genus and species. A great structural homogeneity was observed, reflecting the high number of shared anatomical features. None characteristic is exclusive to this taxonomic group. The value of axial parenchyma arrangement to species segregation is confirmed, as well as the frequency of pores and characteristics of rays. It is not possible to disprove, based on wood anatomy, the inclusion of Hexachlamys in Eugenia , as suggested by Landrum and Kawasaki (1997.

  7. Structural characterization of bentonite clays for utilization as nanofillers in nanocomposites; Caracterizacao estrutural de argilas bentoniticas para utilizacao como nanocargas

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Carlos Ivan Ribeiro de; Rocha, Marisa Cristina Guimares; Vogas, Arthur Considera, E-mail: carlosivanr@gmail.com [Universidade do Estado do Rio de Janeiro (UERJ), Nova Friburgo, RJ (Brazil). Instituto Politecnico; Silva, Ana Lucia Nazareth da [Universidade Federal do Rio de Janeiro (IMA/UFRJ), RJ (Brazil). Instituto de Macromoleculas Professora Eloisa Mano; Bertolino, Luiz Carlos [Centro de Tecnologia Mineral (CETEM/MCTI), Rio de Janeiro, RJ (Brazil)

    2014-07-01

    Clays of different composition have been used in the development of polymer nanocomposites. However, the utilization of bentonite clays has been emphasized in Brazil, mainly due to their availability.The best known and studied deposits of bentonite clays are located in the state of Paraiba. However, these deposits are becoming exhausted after decades of exploitation. In this context, the aim of this work is to proceed the physical-mineralogical characterization of bentonite clays recently discovered in Cubati, PB. In order to achieve this objective, the samples underwent a particle size classification step and were characterized by X-ray fluorescence, X-ray diffraction, infrared spectroscopy, thermal analysis and scanning electron microscopy. Results of X-ray diffraction showed that the samples are composed of smectite, and kaolinite and quartz. The characterization of the samples by FTIR confirmed these results. Results of chemical analysis showed that the clays have predominantly different exchangeable cations. (author)

  8. Resistência ao cisalhamento de alvenaria estrutural de blocos de concreto

    OpenAIRE

    Martins, Helga Ferreira

    2001-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Civil. A alvenaria estrutural predomina na maioria das edificações na Europa, fato não observado no Brasil. As pesquisas existentes apontam que as limitações na construção de edifícios em alvenaria estrutural ocorrem pela falta de pesquisa tecnológica sobre o desempenho estrutural quando submetidos a cargas laterais que originam tensões de cisalhamento. Portanto, o p...

  9. Wood flour

    Science.gov (United States)

    Craig M. Clemons

    2010-01-01

    The term “wood flour” is somewhat ambiguous. Reineke states that the term wood flour “is applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and texture.” Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...

  10. Wood flour

    Science.gov (United States)

    Craig M. Clemons; Daniel F. Caufield

    2005-01-01

    The term “wood flour” is somewhat ambiguous. Reineke states that the term wood flour “is applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and texture”. Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...

  11. OSCAR NIEMEYER: SUA PLASTICIDADE E O SISTEMA ESTRUTURAL

    Directory of Open Access Journals (Sweden)

    Melaine Sarzi

    2014-08-01

    Full Text Available Na arquitetura de Oscar Niemeyer é evidente a presença marcante do Sistema Estrutural na definição da forma e assim no resultado plástico da obra construída. Niemeyer gosta de valorizar o trabalho do engenheiro e costuma dizer em suas publicações: Que na boa arquitetura, quando a estrutura está pronta a arquitetura já está presente. (NIEMEYER, 1958 apud WOLF, 1987, p. 23. Nos palácios de Brasília, Niemeyer procurou um apuro tecnológico que o permitisse usar formas simples e puras, para isso teve como principal apoio a estrutura e seu grande parceiro, o engenheiro Joaquim Cardozo. Os projetos dos Palácios são caracterizados pela própria estrutura, em uma busca de soluções inovadoras, mas sempre dentro da lógica do sistema estático, buscando sempre o limite máximo da resistência dos materiais. Neste trabalho faz-se uma análise da relação da forma arquitetônica com os sistemas estruturais adotados analisando suas soluções técnicas, procurando evidenciar os elementos de criatividade do projetista para equilibrar a estrutura. Faz-se uma análise numérica qualitativa de diversas soluções estruturais.

  12. Characterization and evaluation of ceramic properties of clay used in structural ceramics; Caracterizacao e avaliacao das propriedades ceramicas de argila utilizada em ceramica estrutural

    Energy Technology Data Exchange (ETDEWEB)

    Reis, A.S., E-mail: alessandrar@ifes.edu.br [Instituto Federal de Educacao, Ciencia e Tecnologia do Espirito Santo (IFES), Colatina, ES (Brazil); Oliveira, J.N.; Della-Sagrillo, V.P. [Instituto Federal de Educacao, Ciencia e Tecnologia do Espirito Santo (IFES), Vitoria, ES (Brazil); Valenzuela-Diaz, F.R. [Universidade de Sao Paulo (PMT/EP/USP), Sao Paulo, SP (Brazil)

    2014-07-01

    The clay used in the manufacture of structural ceramic products must meet quality requirements that are influenced by their chemical, physical, mineralogical and microstructural characteristics, which control the ceramic properties of the final products. This paper aims to characterize the clay used in the manufacture of ceramic roof tiles and bricks. The clay was characterized through XRF, XRD, thermogravimetry and differential thermal analysis, Atterberg limits and particle size distribution. Specimens were shaped, dried at 110°C, and burned at 900 deg C in an industrial kiln. After that, they were submitted to tests of water absorption, apparent porosity, bulk density and flexural strength. The results show that the chemical composition of clay has significant amount of silica and alumina and adequate levels of kaolinite for use in structural ceramic. The ceramic properties evaluated in the specimens partially meet the requirements of the Brazilian standard-clays for structural ceramics. (author)

  13. Cloning, periplasmic expression, purification and structural characterization of human ribosomal protein L10; Clonagem, expressao, purificacao e caracterizacao estrutural da proteina ribossomal L10 humana recombinante

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Larissa Miranda

    2009-07-01

    The ribosomal protein L10 (RP L10) is a strong candidate to be included in the class of tumor suppressor proteins. This protein, also denominated as QM, is known to participate in the binding of ribosomal subunits 60S and 40S and the translation of mRNAs. It has a molecular weight that varies between 24 and 26 kDa and an isoelectric point of (pI) 10.5. The sequence of the protein QM is highly conserved in mammals, plants, invertebrates, insects and yeast which indicates its critical functions in a cell. As a tumor suppressor, RP L10 has been studied in strains of Wilm's tumor (WT-1) and tumor cells in the stomach, where was observed a decrease in the amount of its mRNA. More recently, the RP L10 was found in low amounts in the early stages of prostate adenoma and showed some mutation in ovarian cancer, what indicates its role as a suppressor protein in the development of these diseases. It has also been described that this protein interacts with c-Jun and c-Yes inhibiting growth factors and consequently, cell division. This work has an important role on the establishment of soluble expression of QM to give base information for further studies on expression that aim to evaluate the specific regions where it acts binding the 60S and 40S ribosomal subunits and translation, as well as its binding to proto-oncogenes. The cDNA for QM protein was amplified by PCR and cloned into periplasmic expression vector p3SN8. The QM protein was expressed in E. coli BL21 (DE3) in the region of cytoplasm and periplasm, the best condition was obtained from the expression of the recombinant plasmid QM p1813{sub Q}M at 25 degree C or 30 degree C, the soluble protein was obtained with small amounts of contaminants. The assays of secondary structure showed that the QM protein is predominantly alpha-helix, but when it loses the folding, this condition changes and the protein is replaced by {beta}- sheet feature. (author)

  14. Structural characterization, morphological and the magnetic composite of PVDF / Pani / Nickel; Caracterizacao estrutural, morfologica e magnetica do composito de PVDF/Pani/Niquel

    Energy Technology Data Exchange (ETDEWEB)

    Dias, G.C.; Paula, F.R. de; Malmonge, J.A.; Malmonge, L.F., E-mail: agabriel.fct@gmail.com [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Ilha Solteira, SP (Brazil). Faculdade de Engenharia

    2014-07-01

    The incorporation of conductive fillers and the discovery of intrinsic conductive polymers in the preparation of conductive blends and composites have great emphasis in research. In our study, morphologic, structural and magnetic properties of composite PVDF / Pani with the incorporation of nickel particles by physically mixing the resulting powder with the synthesis of polymeric material were studied. Flexible and homogeneous films were obtained by pressing at 180 ° C. Diffraction analysis (XRD), magnetic survey (M-H) rays were done, and scanning (SEM) electron microscopy. The results showed characteristic X-ray peaks of α phase of PVDF and the nickel particles, the micrographs confirmed the presence of the nickel particles homogeneously dispersed throughout the film. The magnetic survey showed that the composite passes a diamagnetic behavior for the presence of ferromagnetic particles.(author)

  15. Structural analysis and magmatism characterization of the Major Gercino shear zone, Santa Catarina State, Brazil; Analise estrutural e caracterizacao do magmatismo da zona de cisalhamento Major Gercino, SC

    Energy Technology Data Exchange (ETDEWEB)

    Passarelli, Claudia Regina

    1996-12-31

    This work describes the geometric and kinematic characteristics of the Major Gercino Shear Zone (MGSZ) in the Canelinha-Garcia area. This shear zone is one of the major lineaments that affect all southern Brazilian precambrian terrains. In Santa Catarina State, it separates, along its whole extension, the supracrustal rocks of the Brusque belt (northern part) from the Granitoid belt (southern). This zone is characterized by a regional NE trend and a dextral sense of movement where ductile-brittle structures predominate. The MGSZ is composed of two mylonitic belts separated by granitoid rocks probably associated to the development of the shear zone. Both shear zones show cataclastic to ultra mylonitic rocks, but mylonites and protomylonites conditions at high strain rate. The calc-alkaline granitoids present in the area can be grouped in two granitoid associations with meta to peraluminous affinities. The Rolador Granitoid Association is characterized by grayish porphyritic biotite-monzogranites and the Fernandes Granitoid Association by coarsed-grained to porphyritic pinkish amphibole-syenogranites. The U-Pb and Rb-Sr ages range from 670 to 590 Ma with the Sr{sup 87} / Sr{sup 86} initial ratios suggesting a crustal contribution in the generation of these rocks. The importance of the pure shear component is also emphasized by the results of the Fry method. Many z axes of the strain ellipses are at high angle to the shear foliation. Symmetric porphyroclasts also corroborate this hypothesis. The micaceous minerals formed during the shear development indicate K-Ar ages around 555 {+-} 15 Ma. Brittle reactivations of the shear zone have been placed by K-Ar in fine-fraction materials at Triassic time (215 {+-} 15 Ma.) 220 refs., 107 figs., 18 tabs., 4 maps

  16. Silica-gel structural characterization during the initial phases of gelation and drying; Caracterizacao estrutural de geis de silica durante as etapas iniciais de gelacao e secagem

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Max Passos

    1996-12-31

    For centuries, glasses and ceramics have been made via melting or solid state reactions at temperatures above 100 deg C. The sol-gel process offers new approaches to the synthesis of glasses and ceramics, combining control of composition and structure at the molecular level with the ability to shape materials in bulk, powder, fiber and thin-film forms. The growth of sol-gel technology research is due to the many unique features of that class of materials. Major applications include optical elements and integrated optical devices, ceramic filters, membranes, supercondutors, magnetic, catalytic and manostructured materials to antioxidant, anticorrosion coatings and composite and biomedical materials. In this work a variety of techniques like spectroscopy, Raman spectroscopy, ultraviolet-visible spectroscopy, light scattering nuclear magnetic resonance, X ray diffraction and nitrogen adsorption have been employed to investigate the initial phase of the sol-gel transition of gamma ray irradiated tetramethoxysilane (TMOS) solutions and non-irradiated TMOS solution and to get information about the structure of the silica gels obtained under different gelation conditions. Typically the tetramethoxysilane solutions were prepared using a molar ratio of TMOS to demineralized water of 1 to 16. Some experiments were made under catalysed conditions. The mixing was carried out at room temperature. The turbidity and light scattering experiments on the polycondensation of tetramethoxysilane show that exists no drastic difference in the gelling time of a gamma ray irradiated and a non-irradiated TMOS+H{sub 2}O (1+16 M) solution. In the absence of a catalyst, the gelling time for both reactions occurs in about 3.30 h. When HNO{sub 3} (o.03 M) was used, the gelling time observed was 3 days. Raman and ultraviolet-visible spectroscopy show no drastic difference during the initial phase at the sol-gel transition under ambient temperature/pressure and under gamma radiation. The gels heated-treated at 70 deg C appeared to be almost completely amorphous with no evidence of peaks attributable to crystalline materials, with average pore radii usually around 11 A. The surface areas found ranged from {approx} 460 M{sup 2}. G{sup -1} (gelation under magnetic field) to {approx} 770 M{sup 2}. g{sup -1} (polymerization under catalysed condition and gelation under gamma radiation) while the total pore volume ranged from 0.27 cm{sup -3}.g{sup -1} (gelation under magnetic field) to 0.43 cm{sup -3}.g{sup -1} (polymerization under catalysed condition and gelation under gamma radiation). (author) 151 refs., 34 figs., 7 tabs.

  17. WOOD WELDING

    OpenAIRE

    Marcos Theodoro Muller; Rafael Rodolfo de Melo; Diego Martins Stangerlin

    2010-01-01

    The term "wood welding" designates what can be defined as "welding of wood surfaces". This new process, that it provides the joint of wood pieces without the use of adhesives or any other additional material, provokes growing interest in the academic environment, although it is still in laboratorial state. Linear friction welding induced bymechanical vibration yields welded joints of flat wood surfaces. The phenomenon of the welding occurs in less time than 10 seconds, with the temperature in...

  18. Wood composites

    Science.gov (United States)

    Lars Berglund; Roger M. Rowell

    2005-01-01

    A composite can be defined as two or more elements held together by a matrix. By this definition, what we call “solid wood” is a composite. Solid wood is a three-dimensional composite composed of cellulose, hemicelluloses and lignin (with smaller amounts of inorganics and extractives), held together by a lignin matrix. The advantages of developing wood composites are (...

  19. Functional Wood

    OpenAIRE

    Cronhjort, Yrsa (ed.); Hughes, Mark (ed.); Paakkanen, Mikko (ed.); Sahi, Karola (ed.); Tukiainen, Pekka (ed.); Tulamo, Tomi (ed.); Vahtikari, Katja (ed.)

    2016-01-01

    Design has been recognized as a key discipline to bring ideas to the market. In addition to current research on human perceptions and the functional capacities of wood, this publication demonstrates the potential of wood in various applications. The designs are the results of three design courses, implemented during 2015 and 2016 at Aalto University in Finland. The Masters student courses included two Wood Studios at Aalto University’s School of Arts, Design and Architecture and the Integrate...

  20. Wood preservation

    Science.gov (United States)

    Rebecca E. Ibach

    1999-01-01

    When left untreated in many outdoor applications, wood becomes subject to degradation by a variety of natural causes. Although some trees possess naturally occurring resistance to decay (Ch. 3, Decay Resistance), many are in short supply or are not grown in ready proximity to markets. Because most commonly used wood species, such as Southern Pine, ponderosa pine, and...

  1. Wood handbook : wood as an engineering material.

    Science.gov (United States)

    Forest Products Laboratory

    1999-01-01

    Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

  2. Validade estrutural e externa do Death Anxiety Questionnaire numa amostra de adultos idosos portuguesa

    OpenAIRE

    Pereira, Maria Fernanda da Silva

    2009-01-01

    Dissertação de Mestrado apresentada no Instituto Superior de Psicologia Aplicada para obtenção do grau de Mestre na especialidade de Psicologia Clínica. O objectivo deste estudo consiste em verificar se as variáveis idade (terceira versus quarta idade), género e religião se relacionam com a Ansiedade Face à Morte (AFM), nos adultos idosos portugueses. Para isso, foi testado um Modelo Estrutural Preditor da AFM numa amostra de adultos idosos. A amostra integra 240 sujeitos, de amb...

  3. Projeto estrutural de pavimentos rodoviários e de pisos industriais de concreto

    OpenAIRE

    Patrícia Lizi de Oliveira

    2000-01-01

    Neste trabalho são estudados os principais parâmetros do projeto estrutural de pavimentos rodoviários e de pisos industriais de concreto. Faz-se um levantamento bibliográfico, apresentando as características estruturais de diversos tipos de pavimentos rígidos. São discutidas as ações diretas e as indiretas em pavimentos de concreto e analisadas as formas de consideração das forças aplicadas. São apresentados modelos para representação da fundação, do pavimento e dos materiais. É feito um resu...

  4. CARACTERIZAÇÃO DO ISOLAMENTO ACÚSTICO DE UMA PAREDE DE ALVENARIA ESTRUTURAL DE BLOCOS CERÂMICOS

    OpenAIRE

    Nestor Alves dos Santos Neto

    2006-01-01

    O trabalho buscou caracterizar a performance do isolamento sonoro de uma parede de alvenaria estrutural de blocos cerâmicos. Trabalhou-se com uma pesquisa experimental, através da determinação minuciosa dos constituintes e a posterior análise do Índice de Redução Sonora. Constatou-se a dificuldade de identificação de dados bibliográficos específicos para previsão teórica do isolamento acústico da alvenaria estrutural. Os resultados experimentais mostraram, além do desempenho acústico da pa...

  5. Wood as an adherend

    Science.gov (United States)

    Bryan H. River; Charles B. Vick; Robert H. Gillespie

    1991-01-01

    Wood is a porous, permeable, hygroscopic, orthotropic, biological composite material of extreme chemical diversity and physical intricacy. Table 1.1 provides an overview of the may variables, including wood variables, that bear on the bonding and performance of wood in wood joints and wood-based materials. Of particular note is the fact that wood properties vary...

  6. Wood Availability

    NARCIS (Netherlands)

    Schelhaas, M.; Layos Mayr, Marian

    2017-01-01

    Estimation of the amount of wood that could potentially be harvested in a country can be accomplished using several approaches. A simple indicator is the balance between annual fellings and Net Annual Increment. However, this indicator does not take into account the actual age-class distribution of

  7. Significance of wood extractives for wood bonding.

    Science.gov (United States)

    Roffael, Edmone

    2016-02-01

    Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

  8. A Ciência da Lógica: Uma leitura Estrutural

    Directory of Open Access Journals (Sweden)

    Marco Aurélio de Medeiros Jordão

    2017-02-01

    Full Text Available O presente artigo tem como objetivo fazer uma análise introdutória da obra Ciência da Lógica de Hegel. Pretendemos prosseguir com uma leitura mais estrutural do texto, analisando os argumentos e expondo a sua tecedura. Portanto, não problematizaremos o texto de Hegel a partir de outros autores ou tentaremos atualizar seu pensamento, nos prenderemos ao texto e a ele nos remeteremos. Para tal propósito nos debruçaremos na introdução da Ciência da Lógica, de tradução do professor Marco Aurélio Werle

  9. Viabilidade do emprego de cinza de casca de arroz natural em concreto estrutural (parte II: durabilidade

    Directory of Open Access Journals (Sweden)

    Geraldo Cechella Isaia

    Full Text Available Resumo Os resíduos incorporados aos materiais de construção devem ser usados, se possível, sem processamentos, para evitar o aumento dos impactos ambientais e custos adicionais. A cinza de casca de arroz (CCA é uma pozolana que deve ser previamente moída, para aumentar a finura e a reatividade com o cimento, quando empregada como material cimentício. Este trabalho estuda cinza de casca de arroz natural (CCAN sem processamento em substituição parcial de 15% de cimento, em massa, para uso em concreto estrutural, cominuída por moagem conjunta com os agregados no tambor da betoneira. Na parte I desta pesquisa, já publicada, são apresentados os resultados de microestrutura, resistência mecânica e retração, também para o teor de 25%, e nesta parte II são mostrados os dados dos ensaios de durabilidade (carbonatação, penetração de cloretos, resistividade, absorção d'água, permeabilidade ao oxigênio, absorção capilar e reação álcali-sílica - RAS, comparados ao concreto referência com 100% de cimento e, ainda, com CCA moída previamente (CCAM. Os resultados mostram que 15% de CCAN é factível de ser empregado em concreto porque apresenta desempenho superior ao concreto referência, quando usado cimento com pozolanas e próximos ou até superiores às misturas de CCAM, para grande parte das variáveis estudadas. Conclui-se que 15% de CCAN para concreto estrutural é viável e traz maior sustentabilidade.

  10. Educação e a crise estrutural do capital: o caso dos Estados Unidos

    Directory of Open Access Journals (Sweden)

    John Bellamy Foster

    2013-04-01

    Full Text Available O presente artigo argumenta que a decadência do ensino público é, nos Estados Unidos, principalmente, um produto de contradições impostas externamente que são inerentes à educação na sociedade capitalista, agravadas em nossos tempos pelas condições de estagnação econômicas, em especial nas economias desenvolvidas, e pelos efeitos do próprio movimento de reforma conservador. Para tal fim, apresenta os pressupostos da política educacional e os desdobramentos e consequências para a educação pública – a partir de uma perspectiva histórica – no contexto da crise estrutural do capital nos Estados Unidos. Explicita-se a crise estrutural associada a uma nova fase do capitalismo: o capital monopolista-financeiro, caracterizada por: (1 estagnação econômica nas economias capitalistas desenvolvidas; (2 uma mudança dramática em direção à financeirização, as bolhas especulativas como meio de expansão econômica; e (3 a rápida concentração (e monopolização de capital em uma escala global, mostrando, como uma consequência do lento crescimento endêmico para as economias desenvolvidas, que as grandes corporações que dominam a economia mundial atual são obrigadas a procurar novos mercados para investimento, fora de suas áreas tradicionais de atuação, levando à aquisição e privatização de elementos-chave da administração do Estado. A contrapartida política do capital monopolista-financeiro é, portanto, a reestruturação neoliberal, em que o Estado é cada vez mais ocupado por interesses privados. Apresentando diversos autores da área da economia e com base em Marx – o texto vai informando a relação de degradação e desvalorização da educação pública. Finaliza suas análises indicando a necessidade de uma longa revolução, para criar, entre outras coisas, uma nova educação ligada à comunidade, e desenvolvida a partir das necessidades reais das pessoas.

  11. Ateliê de desenho e Rorschach: estudo fenômeno-estrutural

    Directory of Open Access Journals (Sweden)

    Jacqueline Santoantonio

    2010-04-01

    Full Text Available A produção de desenhos em grupo e o método de Rorschach foram utilizados ao longo do tratamento de um paciente com esquizofrenia, acompanhado em Centro de Atenção Psicossocial. O referencial proposto para a compreensão do caso é o método fenômeno-estrutural que busca acessar o modo de ser e de vivenciar a doença que afeta o paciente, a partir do que ele revela nas imagens e na linguagem. Aos desenhos de cores acromáticas e conteúdos humanos deformados, o paciente insere cores, representantes da expressão afetiva, e figuras humanas integradas, denotando disponibilidade nas relações. O Rorschach indica contato mais adequado com a realidade, dado a diminuição da distorção da percepção da forma e de figuras fantasiosas. Após diminuição da sintomatologia persecutória e isolamento social, o paciente recebeu alta. O uso desses instrumentos tem contribuído na difícil tarefa diagnóstica e no acompanhamento da evolução de pacientes, nos cuidados interdisciplinares em saúde mental.

  12. IMPREGNATION OF WOOD COMPOSITES

    Directory of Open Access Journals (Sweden)

    Engin Derya Gezer

    2003-04-01

    Full Text Available The production of wood based structural panel and lumber composites become to increase since the wood supply is changing due to the limit of larger dimension solid sawn lumber and insufficient solid woods with enough high strength as well. As we substitute wood composites for solid wood in protected application, these composite must show resistance to wood-destroying organisms such as fungi and insects. Accordingly, the exterior structural composites is required to be treated with preservatives. This paper provides an understanding of preservative treated wood composites. The objectives of this paper includes studying how to add preservative to wood composites, examining additive effect on glue-line and evaluating the best method of manufacturing wood composites treated with preservatives.

  13. Combustion synthesis by reaction and characterization of structural Ni-Zn ferrite doped with copper; Sintese por reacao de combustao e caracterizacao estrutural de ferritas Ni-Zn dopadas com cobre

    Energy Technology Data Exchange (ETDEWEB)

    Dantas, J.; Santos, J.R.D.; Cunha, R.B.L.; Feitosa, C.A.; Costa, A.C.F.M., E-mail: joeldadantas@yahoo.com.br, E-mail: jakelineedm@gmail.com [Universidade Federal de Campina Grande (LabSMac/UFCG), PB (Brazil). Lab. de Sintese de Materiais Ceramicos

    2012-07-01

    The present stud aims to evaluate the effect of doping with Cu{sup 2+} ions concentrations of 0.0, 0.1, 0.2, 0.3 and 0.4 mol in the synthesis and structure of Ni-Zn ferrite. Samples were synthesized by the method of the combustion reaction and characterized by measuring the temperature as a function of reaction time, X-ray diffraction (XRD) and infrared spectroscopy in Fourier transform (FTIR). The combustion temperature and time were 646, 900, 989, 975 and 735°C and 210, 175, 220, 210 and 110 seconds for the sample doped with 0.0, 0.1, 0.2, 0.3 and 0.4 mol of copper, respectively. XRD results show that all concentrations of copper evaluated, there was only a training phase inverse spinel ferrite and Ni-Zn FTIR spectra show absorption bands below 1000cm{sup -1}, which are characteristics of the spinel type AB{sub 2}O{sub 4-} (author)

  14. Airborne magnetometry and gamma spectrometry applied to the geological characterization of the Juruena - Teles Pires - Mato Grosso State (Brazil) structural high; Magnetometria e gamaespectrometria aerotransportadas aplicadas a caracterizacao geologica do alto estrutural Juruena - Teles Pires - MT (Brazil)

    Energy Technology Data Exchange (ETDEWEB)

    Parro, P.S.; Moraes, R.A.V. de; Pires, A.C.B. [Brasilia Univ., DF (Brazil). Inst. de Geociencias. Lab. de Geofisica Aplicada

    1999-07-01

    Extensive geophysical data processing of magnetic and gamma-ray spectrometric data from the Jurena - Teles Pires airborne survey supplied information supporting geologic interpretation of the area. In integrated map, obtained from a qualitative analysis of the geophysical information, brought new insight to the geological knowledge of this gold province. (author)

  15. Structural and morphological characterization of TiO{sub 2} powders prepared using Pechini and combustion reaction; Caracterizacao estrutural e morfologica de nanopos de TiO{sub 2} preparados pelo metodo Pechini e por reacao de combustao

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, P.C.; Almeida, E.P.; Costa, A.C.F.M. da; Lira, H.L., E-mail: pollyanacae@yahoo.com.b [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Dept. de Engenharia de Materiais; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    TiO{sub 2} is a semiconductor oxide and polymorphic and can exist in three crystallographic forms: anatase, rutile and broquita, and forms anatase and rutile are the major interests in scientific research. Thus, this study aims to synthesize TiO{sub 2} by Pechini methods and combustion reaction and to evaluate the influence of synthesis methods in structural and morphological characteristics of the samples. The nanopowders were characterized by X-ray diffraction, nitrogen adsorption, and particle size distribution and scanning electron microscopy. The results of X-ray diffraction showed that the samples obtained by the Pechini method showed the single phase anatase with crystallite size of 20 nm and surface area of 49.44 m{sup 2}/g, whereas the samples synthesized by combustion reaction using glycine as fuel showed the rutile phase as major phase and traces of anatase phase, with crystallite size of 65 nm and surface area 4.34 m{sup 2}/g. (author)

  16. Desenvolvimento de uma nova concepção geométrica para os blocos de concretos não modulares para alvenaria estrutural

    Directory of Open Access Journals (Sweden)

    Gihad Mohamad

    Full Text Available O presente estudo descreve uma nova concepção geométrica para os blocos de concreto não modulares especialmente concebidos para alvenaria estrutural, com montagem capaz de permitir a superposição das paredes longitudinais e transversais dos blocos nas diferentes fiadas da parede, para facilitar o grauteamento e o posicionamento das armaduras verticais dos elementos estruturais. O conjunto de blocos possuem geometrias específicas para cada função, o que facilita a execução das alvenarias armadas e o aumento no desempenho estrutural e a produtividade Como geometria final, desenvolveu-se um conjunto não modular de unidades com potencial de atender aos objetivos do sistema construtivo em alvenaria estrutural.

  17. Mechanics of Wood Machining

    CERN Document Server

    Csanády, Etele

    2013-01-01

    Wood is one of the most valuable materials for mankind, and since our earliest days wood materials have been widely used. Today we have modern woodworking machine and tools; however, the raw wood materials available are continuously declining. Therefore we are forced to use this precious material more economically, reducing waste wherever possible. This new textbook on the “Mechanics of Wood Machining” combines the quantitative, mathematical analysis of the mechanisms of wood processing with practical recommendations and solutions. Bringing together materials from many sources, the book contains new theoretical and experimental approaches and offers a clear and systematic overview of the theory of wood cutting, thermal loading in wood-cutting tools, dynamic behaviour of tool and work piece, optimum choice of operational parameters and energy consumption, the wear process of the tools, and the general regularities of wood surface roughness. Diagrams are provided for the quick estimation of various process ...

  18. Desenvolvimento de ferramentas computacionais para analise estrutural em fadiga e geração de malhas de elementos finitos

    OpenAIRE

    Wallace Gusmão Ferreira

    2002-01-01

    Resumo: O presente trabalho tem por objetivo desenvolver a análise estrutural em problemas de fadiga mecânica, usando o Método dos Elementos Finitos (MEF) e recursos de Engenharia de Software. Inicialmente é feita uma revisão dos conceitos básicos de fadiga mecânica, descrevendo as frentes atuais de pesquisa e as metodologias convencionais de projeto. O modelo constitutivo de material para o tratamento de fadiga é definido com base na Mecânica do Dano e a solução numérica do problema de equil...

  19. Estudo da interação entre edifícios de alvenaria estrutural e pavimentos em concreto armado

    OpenAIRE

    Tiago Fernando Thomazelli da Silva

    2005-01-01

    Um edifício de alvenaria estrutural normalmente se apóia sobre uma estrutura de concreto armado. Devido à existência do efeito arco, a interação entre a alvenaria e a estrutura de concreto se dá de forma complexa. Usualmente essa interação é desconsiderada e as cargas das paredes de alvenaria são simplesmente colocadas na estrutura de concreto de maneira uniforme. Este trabalho propõe um procedimento numérico seguro e eficiente, baseado no método dos elementos finitos, para se considerar essa...

  20. Aplicabilidade da alvenaria estrutural para edifícios de alto padrão em Fortaleza

    OpenAIRE

    Peixoto, Paulo Henrique Hissa

    2005-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Arquitetura e Urbanismo O presente trabalho tem como objetivo principal formalizar diretrizes para concepção de projetos de edifícios residenciais de médio e alto padrão em Fortaleza, utilizando o sistema construtivo em alvenaria estrutural. Foram selecionados quatro edifícios construídos com estrutura em concreto armado e verificadas as possibilidades de serem executados e...

  1. Influência da alvenaria no comportamento estrutural de edifícios altos de concreto armado

    OpenAIRE

    Elilde Medeiros dos Santos

    2007-01-01

    Apresenta-se neste trabalho a análise numérica de um edifício de 32 pavimentos, em concreto armado, situado na cidade do Recife. Primeiramente foi realizada a modelagem pelo método dos elementos finitos apenas para a estrutura em concreto. Em seguida realizou-se a modelagem considerando o efeito dos painéis de alvenaria de vedação no comportamento estrutural do edifício, através do modelo de barras diagonais equivalentes. E, depois, a modelagem mais refinada de alguns desses painéis, submetid...

  2. Request for wood samples

    NARCIS (Netherlands)

    NN,

    1977-01-01

    In recent years the wood collection at the Rijksherbarium was greatly expanded following a renewed interest in wood anatomy as an aid for solving classification problems. Staff members of the Rijksherbarium added to the collection by taking interesting wood samples with them from their expeditions

  3. Iron Stain on Wood

    Science.gov (United States)

    Mark Knaebe

    2013-01-01

    Iron stain, an unsightly blue–black or gray discoloration, can occur on nearly all woods. Oak, redwood, cypress, and cedar are particularly prone to iron stain because these woods contain large amounts of tannin-like extractives. The discoloration is caused by a chemical reaction between extractives in the wood and iron in steel products, such as nails, screws, and...

  4. Energy from wood

    Science.gov (United States)

    J.I. Zerbe

    2004-01-01

    In most developing countries wood and charcoal are the predominant fuels for preparation of food to maintain the quality of life that encompasses the majority of citizens. In many developing countries wood fuels are also important for small and medium size industries. Moreover, energy from wood continues to be important in industrial countries. In the USA biomass...

  5. Wood Formation in Trees

    Science.gov (United States)

    Melanie Mauriat; Gregoire Le Provost; Phillippe Rozenberg; Sylvain Delzon; Nathalie Breda; Bruno Clair; Catherine Coutand; Jean-Christoph Domec; Thierry Fourcaud; Jacqueline Grima-Pettenati; Raul Herrera; Jean-Charles Leple; Nicolas Richet; Jean-Francois Trontin; Christophe Plomion

    2014-01-01

    Among the ecosystem services provided by forests, wood provisioning takes a central position. Wood and derived products have played a critical role in the evolution of human kind and demand for raw material is increasing in a foreseeable future. Wood is used for energy production, construction and a wide variety of products for which different properties are required....

  6. Comparação de custos entre os processos construtivos em concreto armado e em alvenaria estrutural em blocos cerâmico e de concreto

    OpenAIRE

    Silva, Alisson Hoffmann da

    2002-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Civil. Questiona-se a viabilidade econômica do processo construtivo em alvenaria estrutural em relação ao processo construtivo em concreto armado. Entre as obras em alvenaria estrutural, a indagação ocorre sobre qual tipo de unidade, de cerâmica ou de concreto, produz resultados mais efetivos em termos de custos. Este trabalho teve o objetivo de comparar o custo de ...

  7. Manifestações patológicas em edifícios do Programa de Arrendamento Residencial (PAR) em Belo Horizonte, MG, executados em alvenaria estrutural

    OpenAIRE

    Alvarenga, Maria Cláudia Sousa

    2010-01-01

    O presente trabalho consiste na avaliação de desempenho construtivo de empreendimentos contidos no Programa de Arrendamento Residencial (PAR) da Caixa Econômica Federal, na Cidade de Belo Horizonte, executados com a tecnologia de alvenaria estrutural. A proposta desta pesquisa foi a análise das manifestações patológicas existentes, com ênfase no aspecto estrutural dos empreendimentos, porém, contemplando também outros tipos de danos nas edificações. Foram escolhidos cinco empreendimentos, lev...

  8. Wood frame systems for wood homes

    Directory of Open Access Journals (Sweden)

    Julio Cesar Molina

    2010-12-01

    Full Text Available The use of constructive systems that combine strength, speed, with competitive differential techniques and mainly, compromising with the environment, is becoming more popular in Brazil. The constructive system in wood frame for houses of up to five stories is very interesting, because it is a light system, structured in reforested treated wood which allows the combination of several materials, besides allowing speed in the construction and total control of the expenses already in the project phase for being industrialized. The structural behavior of the wood frame is superior to the structural masonry in strength, thermal and acoustic comfort. However, in Brazil, the wood frame is still little known and used, due to lack of technical knowledge about the system, prejudice associated the bad use of the wood as construction material, or still, in some cases, lack of normalization. The aim of this manuscript consists of presenting the main technical characteristics and advantages of the constructive system in wood frame homes, approaching the main stages of the constructive process through examples, showing the materials used in the construction, in addition the main international normative recommendations of the project. Thus, this manuscript also hopes to contribute to the popularization of the wood frame system in Brazil, since it is a competitive, fast and ecologically correct system. Moreover, nowadays, an enormous effort of the technical, commercial and industrial section has been accomplished for the development of this system in the country.

  9. A inércia estrutural da base produtiva brasileira: o IDE e a transferência internacional de tecnologia

    Directory of Open Access Journals (Sweden)

    TULIO CHIARINI

    2016-06-01

    Full Text Available RESUMO O que pode explicar o fato de ter havido uma entrada maciça de IDE no Brasil e ter-se mantido uma inercial estrutural na base produtiva nacional? Existe uma série de fatos macroeconômicos que podem ajudar a explicar essa inércia, como a baixa taxa de investimento e a falta de ordenação dos preços-chave da economia (como taxas de juros e taxa de câmbio, mas a proposição aqui feita é que existe um problema microeconômico estrutural relevante: falta de aptidão tecnológica das empresas industriais brasileiras. Para analisar tal proposição parte-se da separação entre os tipos de IDE (greenfield, fusão e aquisição e 'em carteira' e os tipos de canais de transferência de tecnologia (horizontal e vertical. A partir de elementos empíricos e históricos constrói-se o argumento de que a falta de aptidão tecnológica é elemento-chave no entendimento da perda de dinamismo da indústria nacional.

  10. Aderência de revestimentos em paredes de blocos cerâmicos com função estrutural

    Directory of Open Access Journals (Sweden)

    Jefferson Sidney Camacho

    Full Text Available Resumo O presente trabalho tem por objetivo verificar o comportamento mecânico dos revestimentos cerâmicos frente aos carregamentos na alvenaria estrutural. Neste estudo são apresentados os resultados experimentais e conclusões sobre o comportamento de paredes revestidas quando submetidas a carregamentos verticais crescentes até a ruptura. Os revestimentos foram fixados com argamassa colante industrial, aplicados em paredes de blocos cerâmicos com e sem emboço. Ao longo dos ensaios foram registrados todos os eventos considerados importantes, tais como deformações, início de fissuração, descolamento dos revestimentos, formas e cargas de rupturas. Dessa forma, foi possível quantificar a relação dos carregamentos presentes nas paredes com as fissurações e desprendimentos dos revestimentos cerâmicos, onde se pode verificar que os problemas patológicos ocorreram próximos aos limites de carregamento da estrutura, indicando que o sistema de revestimentos não sofreram relativas alterações visuais e mecânicas dentro do regime estrutural de utilização.

  11. Wood production, wood technology, and biotechnological impacts.

    OpenAIRE

    2007-01-01

    In the year 2001, Prof. Dr. Ursula Kües was appointed at the Faculty of Forest Sciences and Forest Ecology of the Georg-August-University Göttingen to the chair Molecular Wood Biotechnology endowed by the Deutsche Bundesstiftung Umwelt (DBU). Her group studies higher fungi in basic and applied research. Research foci are on mushroom development and on fungal enzymes degrading wood and their applications in wood biotechnology. This book has been edited to thank the DBU for all support given to...

  12. ANÁLISE DE CONFIABILIDADE ESTRUTURAL DE PROBLEMAS BASEADOS NA MECÂNICA DOS SÓLIDOS

    Directory of Open Access Journals (Sweden)

    Vinícius Favaretto Defiltro

    2016-07-01

    Full Text Available RESUMO: A Mecânica dos Sólidos, a partir de hipóteses simplificadoras, fornece modelos de cálculo que podem ser aplicados a vários problemas estruturais e estabelece as bases e o entendimento para o desenvolvimento de teorias e a construção de modelos mais complexos. Entretanto, dentro deste contexto, é comum desprezar as incertezas inerentes às propriedades dos materiais envolvidos, às condições de contorno e à geometria do problema. Neste artigo, ferramentas da Teoria da Confiabilidade Estrutural são aplicadas a problemas estruturais baseados na Mecânica dos Sólidos no intuito de analisá-los considerando algumas das incertezas envolvidas. Para isso, o método de Simulação de Monte Carlo é empregado na análise de confiabilidade de duas vigas. No estudo da primeira estrutura, busca-se investigar a influência da correlação entre variáveis aleatórias na probabilidade de falha do elemento estrutural. Na segunda estrutura, analisa-se o efeito da utilização de materiais com diferentes comportamentos (frágeis ou dúcteis e, consequentemente, diferentes critérios de ruptura, sobre a probabilidade de falha estimada. Verifica-se que as análises de confiabilidade estrutural podem fornecer muitas informações que estão fora do escopo das soluções determinísticas. Tais informações permitem uma avaliação mais precisa da segurança estrutural e podem também levar a um melhor entendimento do modelo estrutural em questão. ABSTRACT: The Solid Mechanics, from simplifying assumptions, provides calculation models that can be applied to various structural problems and establishes the foundation and the understanding for the development of theories and the construction of more complex models. However, within this context, it is common to despise the uncertainties inherent to the properties of the materials involved, the boundary conditions and the geometry of the problem. In this article, Structural Reliability Theory tools

  13. Estudo teórico e experimental de paredes esbeltas de alvenaria estrutural

    Directory of Open Access Journals (Sweden)

    Guilherme Aris Parsekian

    Full Text Available Resumo Um dos fatores a serem levados em conta no dimensionamento de elementos comprimidos é sua esbeltez. Até hoje no Brasil utiliza-se o conceito de esbeltez simplificado, no qual o comprimento de flambagem é determinado por uma altura efetiva (hef, e o raio de giração é substituído por um parâmetro chamado espessura efetiva (tef, para o cálculo de fator minorador de resistência. Outras normas de alvenaria estrutural, como as norte-americana, europeia e australiana, trazem também em sua formulação de cálculo da capacidade de carga de uma parede comprimida um fator redutor de resistência. Já a normalização canadense indica que seja feita uma análise mais próxima da realidade, considerando o equilíbrio na configuração deformada da parede (análise P-Delta. Um programa experimental que envolveu 18 ensaios de paredes de blocos cerâmicos e de concreto com elevada esbeltez, obtida com a utilização de blocos de pequena espessura, é aqui relatado. As previsões da capacidade de carga para o caso de blocos de concreto de geometria vazada foram próximas aos resultados dos ensaios. No caso dos blocos cerâmicos utilizados, de geometria complexa, com as paredes dos blocos também vazadas, apenas a aproximação da norma canadense permitiu obter com algum grau de segurança e proximidade os resultados dos ensaios. Paredes mais esbeltas e com blocos de geometrias complexas exigem procedimentos mais refinados para o cálculo, em que o processo P-Delta e a verificação da seção com material não resistente à tração podem ser uma solução.

  14. SINTESE E CARACTERIZAÇÃO ESTRUTURAL DE SnO2 DOPADO COM Ni

    Directory of Open Access Journals (Sweden)

    José Hilton Gomes Rangel

    2011-09-01

    Full Text Available Dioxido de estanho, dopado ou não com elementos de transição ou seus óxidos, vem sendo preparado por diferentes técnicas e empregado de sensores de NO2 a catalisadores em processos químicos. Nesse trabalho foi empregado o Método dos Precursores Poliméricos na obtenção de SnO2, puro e dopado com 1% e 5% de níquel, e utilizado a difração de raios X (DRX, a Espectroscopia Raman e o método BET na caracterização estrutural do material obtido. A análise por DRX dos pós de SnO2 indicou apenas a formação da fase cassiterita nas diferentes temperaturas de calcinação, revelando que o Ni, nas concentrações estudadas, não provocou modificações visíveis na rede do dióxido de estanho. As análises comparativas das bandas Raman dos pós de SnO2 sem e com a adição de Ni mostrou a elevação do grau de cristalinidade e formação da fase característica do Sn com o aumento da temperatura de calcinação. As isotermas de adsorção a 77 K das amostras calcinadas a 700 °C, 800 °C e 900 °C, de acordo com a classificação IUPAC (International Union Pure and Apllied Chemistry, são do tipo II com histerese H1, ou seja, caracterizam sólidos meso e macroporosos regulares, de formato cilíndrico e/ou poliédricos com as extremidades abertas. Neste trabalho foram obtidos pós de SnO2 com área superficial variando de 10,9 a 50,3 m2.g-1.

  15. Urban Wood Waste Resource Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, G.

    1998-11-20

    This study collected and analyzed data on urban wood waste resources in 30 randomly selected metropolitan areas in the United States. Three major categories wood wastes disposed with, or recovered from, the municipal solid waste stream; industrial wood wastes such as wood scraps and sawdust from pallet recycling, woodworking shops, and lumberyards; and wood in construction/demolition and land clearing debris.

  16. Structure and function of wood

    Science.gov (United States)

    Alex C. Wiedenhoeft; Regis B. Miller

    2005-01-01

    Despite the many human uses to which various woods are suited, at a fundamental level wood is a complex biological structure, itself a composite of many chemistries and cell types acting together to serve the needs of the plant. Although humans have striven to understand wood in the context of wood technology, we have often overlooked the key and basic fact that wood...

  17. Chapter 9: Wood Energy

    Science.gov (United States)

    Francisco X. Aguilar; Karen Abt; Branko Glavonjic; Eugene Lopatin; Warren  Mabee

    2016-01-01

    The availabilty of information on wood energy continues to improve, particularly for commoditized woodfuels.  Wood energy consumption and production vary in the UNECE region because demand is strngly affected by weather and the prices of competing energy sources.  There has been an increase in wood energy in the power-and-heat sector in the EU28 and North American...

  18. Moisture Transport in Wood

    DEFF Research Database (Denmark)

    Astrup, T.; Hansen, K. K.; Hoffmeyer, P.

    2005-01-01

    Modelling of moisture transport in wood is of great importance as most mechanical and physical properties of wood depend on moisture content. Moisture transport in porous materials is often described by Ficks second law, but several observations indicate that this does not apply very well to wood....... Recently at the Technical University of Denmark, Department of Civil Engineering, a new model for moisture transport in wood has been developed. The model divides the transport into two phases, namely water vapour in the cell lumens and bound water in the cell walls....

  19. \\"Caracterização estrutural e óptica de elastômeros dopados com ferrofluidos\\"

    OpenAIRE

    Cleidilane de Oliveira Sena

    2007-01-01

    Este trabalho visa a caracterização estrutural, mecânica e óptica de elastômeros de uretâno/uréia (PU/PBDO), baseados em óxido de poli(propileno) e poli(butenodiol), puro, após inflação em tolueno e dopados com ferrofluido. As proporções em massa (%) de PU e PBDO utilizadas são 40/60, 50/50, 60/40 e 80/20. As análises estruturais foram feitas através das técnicas de microscopia óptica de luz polarizada, microscopia de força atômica e magnética, e microscopia confocal de varredura laser com a...

  20. Heat sterilization of wood

    Science.gov (United States)

    Xiping Wang

    2010-01-01

    Two important questions should be considered in heat sterilizing solid wood materials: First, what temperature–time regime is required to kill a particular pest? Second, how much time is required to heat the center of any wood configuration to the kill temperature? The entomology research on the first question has facilitated the development of international standards...

  1. Wood supply and demand

    Science.gov (United States)

    Peter J. Ince; David B. McKeever

    2011-01-01

    At times in history, there have been concerns that demand for wood (timber) would be greater than the ability to supply it, but that concern has recently dissipated. The wood supply and demand situation has changed because of market transitions, economic downturns, and continued forest growth. This article provides a concise overview of this change as it relates to the...

  2. Complex geometries in wood

    DEFF Research Database (Denmark)

    Tamke, Martin; Ramsgaard Thomsen, Mette; Riiber Nielsen, Jacob

    2009-01-01

    The versatility of wood constructions and traditional wood joints for the production of non standard elements was in focus of a design based research. Herein we established a seamless process from digital design to fabrication. A first research phase centered on the development of a robust parame...... parametric model and a generic design language a later explored the possibilities to construct complex shaped geometries with self registering joints on modern wood crafting machines. The research was carried out as collaboration with industrial partners.......The versatility of wood constructions and traditional wood joints for the production of non standard elements was in focus of a design based research. Herein we established a seamless process from digital design to fabrication. A first research phase centered on the development of a robust...

  3. Cord Wood Testing in a Non-Catalytic Wood Stove

    Energy Technology Data Exchange (ETDEWEB)

    Butcher, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Trojanowski, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wei, G. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2014-06-30

    EPA Method 28 and the current wood stove regulations have been in-place since 1988. Recently, EPA proposed an update to the existing NSPS for wood stove regulations which includes a plan to transition from the current crib wood fuel to cord wood fuel for certification testing. Cord wood is seen as generally more representative of field conditions while the crib wood is seen as more repeatable. In any change of certification test fuel, there are questions about the impact on measured results and the correlation between tests with the two different fuels. The purpose of the work reported here is to provide data on the performance of a noncatalytic stove with cord wood. The stove selected has previously been certified with crib wood which provides a basis for comparison with cord wood. Overall, particulate emissions were found to be considerably higher with cord wood.

  4. Chapter 6: Wood energy and competing wood product markers

    Science.gov (United States)

    Kenneth E. Skog; Robert C. Abt; Karen Abt

    2014-01-01

    Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

  5. Structure and Function of Wood

    Science.gov (United States)

    Alex C. Wiedenhoeft

    2012-01-01

    Wood is a complex biological structure, a composite of many cell types and chemistries acting together to serve the needs of living plant. Attempting to understand wood inthe context of wood technology, we have often overlooked the basic fact that wood evolved over the course of millions of years to serve three main functions in plants-conduction of water from the...

  6. A infância enquanto categoria estrutural Childhood as a structural form

    Directory of Open Access Journals (Sweden)

    Jens Qvortrup

    2010-08-01

    Full Text Available Nos países do hemisfério norte, um dos símbolos da consolidação de uma área de conhecimento é a publicação de um handbook - em português, manual ou compêndio - cujos capítulos apresentam um breve estado da arte de seus respectivos temas. Em 2009, The Palgrave Handbook of Childhood Studies foi publicado, indicando o reconhecimento da área dos estudos da infância. Sabe-se que as crianças foram principalmente investigadas pela psicologia ou pela pedagogia e que as ciências sociais pouco produziram sobre elas, priorizando estudos sobre a família ou sobre a escola. Há pouco mais de vinte anos, entretanto, começaram a tornar-se o foco dos estudos sociais da infância, que a tomaram como um fenômeno social. Nesse sentido, foi definido um campo que investiga as crianças como agentes sociais, produtoras de culturas, e a infância como categoria na estrutura social, o que ampliou de modo significativo a produção de conhecimento sobre as relações sociais estabelecidas entre as próprias crianças (seus pares e com os adultos (relações intra e intergeracionais, sobre suas competências como protagonistas de suas vidas, como agentes sociais cuja ação modifica/transforma os mundos sociais nos quais estão inseridas. O texto do Prof. Jens Qvortrup, responsável pela constituição do primeiro grupo de pesquisa no campo da sociologia da infância (RC53 na Associação Internacional de Sociologia (ISA, e um dos organizadores do Handbook, trata da infância como estrutura social. Publicado como primeiro capítulo do The Palgrave Handbook of Childhood Studies, o trabalho apresenta a infância como segmento na estrutura social e as aplicações de uma perspectiva estrutural, ou seja, inserido nos fundamentos teóricos dos estudos da infância, o capítulo define uma abordagem que difere tanto de pesquisas sobre socialização quanto de estudos sobre desenvolvimento infantil, oferecendo elementos para a realização de pesquisas que

  7. Fatigue Damage in Wood

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben

    1996-01-01

    An investigation of fatigue failure in wood subjected to load cycles in compression parallel to grain is presented. Fatigue failure is found to depend both on the total time under load and on the number of cycles.Recent accelerated fatigue research on wood is reviewed, and a discrepancy between...... to 10 Hz are used. The number of cycles to failure is found to be a poor measure of the fatigue performance of wood. Creep, maximum strain, stiffness and work are monitored throughout the fatigue tests. Accumulated creep is suggested identified with damage and a correlation between stiffness reduction...

  8. Análise da influência do capital estrutural no sucesso de startups incubadas: uma pesquisa com 21 empreendedores

    Directory of Open Access Journals (Sweden)

    Elizandra Machado

    2016-04-01

    Full Text Available Promover o desenvolvimento de novas empresas tem sido um campo vasto de pesquisa. Observa-se que a iniciativa perpassa diversos setores da economia, iniciando-se pelo empreendedor, mas alcançando apoio do governo, órgãos de fomento, universidades e incubadoras de empresas. Há atualmente uma rede de organizações, dentre as quais ANPROTEC e o Sebrae que, juntamente com as incubadoras, tem procurado criar um ambiente em que novas empresas surjam e se desenvolvam, em que o conhecimento e o capital intelectual sejam potencializados. Nesse sentido, o objetivo geral dessa pesquisa foi analisar a influência do capital estrutural no sucesso de startups incubadas. A criação de startups tem sido cada vez mais reconhecida como um importante elemento para o desenvolvimento econômico brasileiro. Já o capital estrutural é um dos componentes do capital intelectual e possui como exemplos a infraestrutura física e tecnológica de uma empresa. Nesse contexto, entretanto, existe uma carência de trabalhos científicos que demonstrem a relação do Capital Estrutural (CE com o sucesso de startups incubadas. No desenvolvimento, ocorreu a determinação dos construtos de CE em startups incubadas e a identificação dos critérios para análise do CE em startups incubadas. E na comprovação empírica, foi validado o instrumento com seis gestores de incubadoras da região Sul do Brasil e realizada a aplicação em 21 startups incubadas, sendo que 04 delas de insucesso, 06 graduadas e 11 incubadas. Foi possível identificar que o Capital Estrutural tem influência no sucesso de startups incubadas, principalmente no que se refere ao apoio físico e tecnológico recebido das incubadoras. 

  9. Wood construction under cold climate

    DEFF Research Database (Denmark)

    Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror

    2014-01-01

    As wood constructions increasingly use engineered wood products worldwide, concerns arise about the integrity of the wood and adhesives system. The glueline stability is a crucial issue for engineered wood application, especially under cold climate. In this study, Norway spruce (Picea abies...... specimens need to be tested in further work to more completely present the issue. The EN 301 and EN 302 may need to be specified based on wood species....

  10. Avaliação do desempenho estrutural em serviço de lajes treliçadas pré-moldadas de concretos com agregados leves

    Directory of Open Access Journals (Sweden)

    Anderson de Oliveira

    Full Text Available O concreto com agregado leve tem sido cada vez mais empregado em razão da reduzida massa específica, do elevado isolamento térmico e acústico e da melhoria na resistência estrutural a carregamentos cíclicos. Neste trabalho foram estudados concretos com agregados leves com resistência à compressão em torno de 20 MPa e seu desempenho estrutural em lajes treliçadas pré-moldadas. Utilizaram-se três diferentes concretos com valores de massa específica entre 1.200 e 1.600 kg/m³. Os concretos foram avaliados com relação à resistência à compressão (aos 3, 7 e 28 dias e à absorção total de água (aos 28 dias. Com os três tipos de concreto foram produzidas e ensaiadas à flexão lajes pré-moldadas (duas lajes para cada tipo de concreto, com a avaliação de seu comportamento no estado limite de serviço (ELS para cargas de curta duração, ou seja, sem considerar efeitos ao longo do tempo. Os resultados mostraram o potencial do uso de concretos com agregados leves nesse tipo de laje estrutural.

  11. Adenocarcinoma and wood.

    Science.gov (United States)

    Schraub, S; Belon-Leneutre, M; Mercier, M; Bourgeois, P

    1989-12-01

    The relation of adenocarcinoma of the facial sinuses and exposure to wood dust has been recognized for 20 years. As the tracheobronchial mucosa is similar to that lining the sinuses, a link between bronchial adenocarcinoma and wood dust exposure has been postulated. To test this hypothesis, a case-control study was conducted, based on all the histologically proven cases of adenocarcinoma of the lung reported to the tumor registry of the Doubs region of France from 1978 to 1985 and random population controls matched for age and residence. A questionnaire on occupational exposure and tobacco consumption was completed by 53 cases and 160 controls. Exposure to wood was similar for both groups, the crude relative risk (odds ratio) being 1.06; adjustment for tobacco consumption did not modify this value. Exposure to wood dust does not seem to be an occupational risk factor in the genesis of bronchial adenocarcinoma.

  12. Wood - a carbon depot

    OpenAIRE

    Lipušček, Igor; Tišler, Vesna

    2003-01-01

    The article examines the global movement of carbon dioxide, the most important greenhouse gas due to its large quantities. We studied the carbon cycle with possibilities of its extension, and analysed the mechanisms that remove carbon dioxide from the atmosphere and bind it into solid substances for a longer period of time. The focus was on carbon dioxide sink into biomass and carbon deposit in wood. On the basis of wood component data and chemical analysis of the components, we calculated th...

  13. Wood for the trees

    Directory of Open Access Journals (Sweden)

    Rob Garbutt

    2013-10-01

    Full Text Available Our paper focuses on the materiality, cultural history and cultural relations of selected artworks in the exhibition Wood for the trees (Lismore Regional Gallery, New South Wales, Australia, 10 June – 17 July 2011. The title of the exhibition, intentionally misreading the aphorism “Can’t see the wood for the trees”, by reading the wood for the resource rather than the collective wood[s], implies conservation, preservation, and the need for sustaining the originating resource. These ideas have particular resonance on the NSW far north coast, a region once rich in rainforest. While the Indigenous population had sustainable practices of forest and land management, the colonists deployed felling and harvesting in order to convert the value of the local, abundant rainforest trees into high-value timber. By the late twentieth century, however, a new wave of settlers launched a protest movements against the proposed logging of remnant rainforest at Terania Creek and elsewhere in the region. Wood for the trees, curated by Gallery Director Brett Adlington, plays on this dynamic relationship between wood, trees and people. We discuss the way selected artworks give expression to the themes or concepts of productive labour, nature and culture, conservation and sustainability, and memory. The artworks include Watjinbuy Marrawilil’s (1980 Carved ancestral figure ceremonial pole, Elizabeth Stops’ (2009/10 Explorations into colonisation, Hossein Valamanesh’s (2008 Memory stick, and AñA Wojak’s (2008 Unread book (in a forgotten language. Our art writing on the works, a practice informed by Bal (2002, Muecke (2008 and Papastergiadis (2004, becomes a conversation between the works and the themes or concepts. As a form of material excess of the most productive kind (Grosz, 2008, p. 7, art seeds a response to that which is in the air waiting to be said of the past, present and future.

  14. Photodegradation of thermally modified wood.

    Science.gov (United States)

    Srinivas, Kavyashree; Pandey, Krishna K

    2012-12-05

    Natural wood, being biological material, undergoes rapid degradation by ultraviolet (UV) radiations and other environmental factors under outdoor exposure. In order to protect wood from such degradation, the chemical structure of wood is altered by chemical modification or heat treatment. In the present study, heat treated specimens of rubberwood (Hevea brasiliensis) were exposed to xenon light source in a weather-o-meter for different periods up to 300 h. Photostability of modified and unmodified wood was evaluated in terms of colour and chemical changes. Light coloured untreated wood became dark upon UV irradiation whereas, dark colour of heat treated wood lightened on UV exposure. CIE lightness parameter (L(*)) decreased for untreated wood whereas its value increased for heat treated wood upon irradiation. Other colour coordinates a(*) and b(*) increased with exposure duration for both untreated and heat treated wood. The overall colour change (ΔE(*)) increased for both untreated and heat treated wood. The Fourier Transform Infrared (FTIR) spectroscopic studies revealed severe lignin degradation of heat treated wood due to UV light exposure. Colour changes and FTIR measurements indicate that thermal modification of wood was ineffective in restricting light induced colour changes and photodegradation of wood polymers. Copyright © 2012 Elsevier B.V. All rights reserved.

  15. WOOD PROPERTIES AND EFFECT OF WOOD PROPERTIES ON THE WOOD FINISHING

    Directory of Open Access Journals (Sweden)

    Abdulkadir Malkoçoğlu

    2006-04-01

    Full Text Available Wood is basic raw material for furniture and joinery industries with wood structures. Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth condition, size of the tree at harvest, sawing, and other manufacturing processes. Wood properties have been characterized within two groups as natural and manufacturing factors that effects finishing performance. Grow rate, density, knots, moisture content, extractives and juvenile wood are natural characteristics. Grain orientation, texture, drying and performance expectations are manufacturing characteristics. In this review, the effects of natural and manufacturing characteristics are discussed on the surface finishing performance of wood.

  16. Precision wood particle feedstocks

    Science.gov (United States)

    Dooley, James H; Lanning, David N

    2013-07-30

    Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

  17. Wood energy-commercial applications

    Science.gov (United States)

    Kennel, R. P.

    1978-01-01

    Wood energy is being widely investigated in many areas of the country because of the many obvious benefits of wood fuel such as the low price per million Btus relative to coal, oil, and gas; the wide availability of noncommercial wood and the proven ability to harvest it; established technology which is reliable and free of pollution; renewable resources; better conservation for harvested land; and the potential for jobs creation. The Southeastern United States has a specific leadership role in wood energy based on its established forest products industry experience and the potential application of wood energy to other industries and institutions. Significant questions about the widespread usage of wood energy are being answered in demonstrations around the country as well as the Southeast in areas of wood storage and bulk handling; high capitalization costs for harvesting and combustion equipment; long term supply and demand contracts; and the economic feasibility of wood energy outside the forest products industry.

  18. Variation in root wood anatomy

    NARCIS (Netherlands)

    Cutler, D.F.

    1976-01-01

    Variability in the anatomy of root wood of selected specimens particularly Fraxinus excelsior L. and Acer pseudoplatanus L. in the Kew reference microscope slide collection is discussed in relation to generalised statements in the literature on root wood anatomy.

  19. Methane from wood

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, T. F.; Barreto, L.; Kypreos, S.; Stucki, S

    2005-07-15

    The role of wood-based energy technologies in the Swiss energy system in the long-term is examined using the energy-system Swiss MARKAL model. The Swiss MARKAL model is a 'bottom-up' energy-systems optimization model that allows a detailed representation of energy technologies. The model has been developed as a joint effort between the Energy Economics Group (EEG) at Paul Scherrer Institute PSI) and the University of Geneva and is currently used at PSI-EEG. Using the Swiss MARKAL model, this study examines the conditions under which wood-based energy technologies could play a role in the Swiss energy system, the most attractive pathways for their use and the policy measures that could support them. Given the involvement of PSI in the ECOGAS project, especial emphasis is put on the production of bio-SNG from wood via gasification and methanation of syngas and on hydrothermal gasification of woody biomass. Of specific interest as weIl is the fraction of fuel used in passenger cars that could be produced by locally harvested wood. The report is organized as follows: Section 2 presents a brief description of the MARKAL model. Section 3 describes the results of the base case scenario, which represents a plausible, 'middle-of-the-road' development of the Swiss energy system. Section 4 discusses results illustrating the conditions under which the wood-based methanation technology could become competitive in the Swiss energy market, the role of oil and gas prices, subsidies to methanation technologies and the introduction of a competing technology, namely the wood-based Fischer-Tropsch synthesis. FinaIly, section 5 outlines some conclusions from this analysis. (author)

  20. TCP HolyWood

    OpenAIRE

    Oscar Núñez Mori

    2005-01-01

    We introduce a new end-to-end, sender side Transport Control Protocol called TCP HolyWood or in short TCP-HW. In a simulated wired environment, TCP HolyWood outperforms in average throughput, three of the more important TCP protocols ever made, we are talking about TCP Reno, TCP Westwood, and TCP Vegas; and in average jitter to TCP Reno and TCP Vegas too. In addition, according to Jain’s index, our proposal is as fair as TCP Reno, the Standard. Apresentamos um novo Protocolo de Controle de...

  1. Compressive Fatigue in Wood

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben

    1999-01-01

    An investigation of fatigue failure in wood subjected to load cycles in compression parallel to grain is presented. Small clear specimens of spruce are taken to failure in square wave formed fatigue loading at a stress excitation level corresponding to 80% of the short term strength. Four...... frequencies ranging from 0.01 Hz to 10 Hz are used. The number of cycles to failure is found to be a poor measure of the fatigue performance of wood. Creep, maximum strain, stiffness and work are monitored throughout the fatigue tests. Accumulated creep is suggested identified with damage and a correlation...

  2. Structure and function of wood

    Science.gov (United States)

    Alex Wiedenhoeft

    2010-01-01

    Wood is a complex biological structure, a composite of many chemistries and cell types acting together to serve the needs of a living plant. Attempting to understand wood in the context of wood technology, we have often overlooked the key and basic fact that wood evolved over the course of millions of years to serve three main functions in plants― conduction of water...

  3. The Asian Wood Pellet Markets

    Science.gov (United States)

    Joseph A. Roos; Allen Brackley

    2012-01-01

    This study examines the three major wood pellet markets in Asia: China, Japan, and South Korea. In contrast to the United States, where most wood pellets are used for residential heating with pellet stoves, a majority of the wood pellets in Asia are used for co-firing at coal-fired power plants. Our analysis indicated that Japan is the largest importer of wood pellets...

  4. Classroom Demonstrations of Wood Properties.

    Science.gov (United States)

    Foulger, A. N.

    Presented in this manual are 20 activities selected to show some of the properties of wood and how these properties relate to the cellular structure of wood. Each activity includes stated objectives, indicates materials needed, and explains procedures. Illustrations related to the activities, glossary of terms, and photographs of wood structure…

  5. Macrophotographic wood atlas of Annonaceae.

    NARCIS (Netherlands)

    Koek-Noorman, J.; Westra, L.I.T.

    2012-01-01

    In this article, a general description of the microscopic wood anatomy of Annonaceae is given. We provide a description of the wood anatomical features of the family and of all subfamilies and tribes, all from material in the Utrecht Wood collection. Hand-lens images can be an important help in

  6. Ovalbumin as a Wood Adhesive

    Science.gov (United States)

    Charles R. Frihart; Holly Satori; Zhu Rongxian; Michael J. Birkeland

    2014-01-01

    Use of proteins to bond wood dominated industrial production until the middle of the 20th century (1). The ensuing creation of the plywood and glulam beam industries allowed for more efficient use of wood resources than is possible with solid wood products. Many protein sources have been used as adhesives, including plant (soybean) and animal (blood, fish scales,...

  7. Wood construction and magnetic characteristics of impregnated type magnetic wood

    Science.gov (United States)

    Oka, Hideo; Hojo, Atsushi; Seki, Kyoushiro; Takashiba, Toshio

    2002-02-01

    The results of experiments involving the AC and DC magnetic characteristics of impregnated type magnetic wood were studied by taking into consideration the wood construction and fiber direction. The experimental results show that the sufficient amount of impregnated magnetic fluid varies depending on the fiber direction and length, and the grain face of the wood material. The impregnated type magnetic wood sample that is fully impregnated by magnetic fluid has a 60% saturation magnetization compared to the saturation magnetization of magnetic fluid. Samples for which the wood fiber direction was the same as the direction of the magnetic path had a higher magnetization intensity and permeability.

  8. Identification of coniferous woods

    Science.gov (United States)

    B. Francis Kukachka

    1960-01-01

    The identification of coniferous woods is generally regarded as being more difficult than for the hardwood species. This is due to the fact that conifers are more elemental in their structure and, as a consequence, the number of diagnostic features that may he employed is proportionately smaller. Instructions are given here in the sequential use of primary diagnostic...

  9. Grant Wood: "American Gothic."

    Science.gov (United States)

    Fitzgerald, Diane M.

    1988-01-01

    Presents a lesson plan which exposes students in grades 10-12 to the visual symbols and historical references contained in Grant Wood's "American Gothic." Includes background information on the artist and the painting, instructional strategies, a studio activity, and evaluation criteria. (GEA)

  10. Chapter 3: Wood Decay

    Science.gov (United States)

    Dan Cullen

    2014-01-01

    A significant portion of global carbon is sequestered in forest systems. Specialized fungi have evolved to efficiently deconstruct woody plant cell walls. These important decay processes generate litter, soil bound humic substances, or carbon dioxide and water. This chapter reviews the enzymology and molecular genetics of wood decay fungi, most of which are members of...

  11. Wood waste in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Matos, O.; Ribeiro, R. [Biomass Centre for Energy - CBE, Miranda do Corvo (Portugal)

    1997-12-31

    The energy policy of the EC, as well as most of member states points to a sizeable increase of energy production based on renewable energy sources, wood, wood residues, agricultural residues, energy crops including SRF, organic sludges, solid residues, etc. Most recent goals indicate a desirable duplication of today`s percentage by 2010. The reasons for this interest, besides diversification of sources, less dependence on imported fuels, use of endogenous resources, expected decrease of fossil fuel reserves, use of available land, additional employment and income for rural communities, etc., are related to important environmental benefits namely in terms of emissions of hot house gases. Wood waste, resulting from forest operations, cleaning, cultural and final cuttings, and from wood based industries, constitute a special important resource by reason of quality and availability. In addition to this they do not require additional land use and the removal is beneficial. In the run-up to the becoming December`s 1997 `Climate Change Summit` in Kioto, there is mounting pressure on companies to plan on carbon cuts. (author) 6 refs., 1 tab.

  12. Tannins in tropical woods

    Energy Technology Data Exchange (ETDEWEB)

    Doat, J.

    1978-01-01

    A preliminary study was made of the chemistry of pyrogallol- and catecholtannins, their general properties and methods of extraction and determination. Three methods of estimation - Lowenthal, powdered hide and spectrophotometry - were compared using two control solutions, four samples of wood and one of bark. Using the empirical powdered hide method, tannins of both types were estimated in wood and bark of various tropical species (some separately and some as a mixture), Moroccan oaks (Quercus suber and Q. ilex), and European oak 9Q. petraea). Further tests were made on the wood and bark of the two mangrove species, Rhizophora mangle and R. racemosa, by subjecting them to successive extraction with a range of solvents. None of the woods tested had as much as the 10% of tannins considered necessary in economic sources. The bark of the two mangroves, of Eucalyptus urophylla and of Prosopis africana had tannin contents over 10% and the latter two species had very favorable tannin/non-tannin ratios. All the tropical species, with the probable exception of E. urophylla, had only catecholtannins. Only the oaks and E. urophylla bark gave positive results when tested for gallotannins.

  13. History of wood machining

    Science.gov (United States)

    Peter Koch

    1967-01-01

    The history of wood machining is closely tied to advanced in metallurgy and power sources. It has been strongly and continuously shaped by prevailing economic forces and the rise and decline of other contemporary industries. This paper sketches a few of the highlights, with emphasis on developments in North America.

  14. Harvesting wood for energy.

    Science.gov (United States)

    Rodger A. Arola; Edwin W. Miyata

    1981-01-01

    Illustrates the potential of harvesting wood for industrial energy, based on the results of five harvesting studies. Presents information on harvesting operations, equipment costs, and productivity. Discusses mechanized thinning of hardwoods, clearcutting of low-value stands and recovery of hardwood tops and limbs. Also includes basic information on the physical and...

  15. Técnicas construtivas de edifícios residenciais em alvenaria estrutural não armada de blocos vazados de concreto

    OpenAIRE

    Araújo, Fábio Elias

    2001-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Cartarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Civil. O uso da alvenaria, como estrutura projetada racionalmente no Brasil, é recente e tem crescido muito nos últimos anos. Estima-se que, atualmente, mais de 15% das obras de edifícios residenciais na Grande Florianópolis esteja sendo construído em alvenaria estrutural de blocos de concreto por mais de uma dezena de diferentes empresas. Porém, a maioria dos proce...

  16. Heterogeneidade florístico-estrutural do componente arbóreo em um sistema de fragmentos florestais no Planalto Sul catarinense

    OpenAIRE

    Marcelo Negrini; Pedro Higuchi; Ana Carolina Silva; Fábio Rodrigues Spiazzi; Fernando Buzzi Junior; Manoela Bez Vefago

    2014-01-01

    Este trabalho teve como proposta analisar as variações espaciais, florísticas e estruturais do componente arbóreo de um sistema de fragmentos de Floresta Ombrófila Mista no Planalto catarinense. Para isso, foram alocadas 50 parcelas de 200 m² (10 x 20 m) em quatro fragmentos, cujos indivíduos com diâmetro à altura do peito (DAP) > 5 cm foram identificados e medidos. Foi calculado o Índice de Valor de Importância e realizada a comparação florístico-estrutural entre os fragmentos, por meio de A...

  17. Análise do comportamento experimental e numérico de prismas de alvenaria estrutural utilizando o elemento finito prismático regular parabólico

    OpenAIRE

    Albertini, Maicon Marino [UNESP

    2009-01-01

    Com a expansão da Engenharia de Estruturas e os diferentes sistemas construtivos que vêm ao longo dos anos surgindo na indústria da construção civil, o Engenheiro Estrutural necessita incorporar a análise numérica como uma ferramenta de trabalho usual, de modo a manter a qualidade e a competitividade de seu trabalho, ainda que a análise dos projetos em alvenaria estrutural tenha sua modelagem bastante simples. A princípio, as ferramentas computacionais que buscam traduzir a realidade do compo...

  18. Lignin‐Retaining Transparent Wood

    Science.gov (United States)

    Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin

    2017-01-01

    Abstract Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light‐transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high‐lignin‐content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK−1, and work‐tofracture of 1.2 MJ m−3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy‐saving buildings. PMID:28719095

  19. Lump wood combustion process

    Science.gov (United States)

    Kubesa, Petr; Horák, Jiří; Branc, Michal; Krpec, Kamil; Hopan, František; Koloničný, Jan; Ochodek, Tadeáš; Drastichová, Vendula; Martiník, Lubomír; Malcho, Milan

    2014-08-01

    The article deals with the combustion process for lump wood in low-power fireplaces (units to dozens of kW). Such a combustion process is cyclical in its nature, and what combustion facility users are most interested in is the frequency, at which fuel needs to be stoked to the fireplace. The paper defines the basic terms such as burnout curve and burning rate curve, which are closely related to the stocking frequency. The fuel burning rate is directly dependent on the immediate thermal power of the fireplace. This is also related to the temperature achieved in the fireplace, magnitude of flue gas losses and the ability to generate conditions favouring the full burnout of the fuel's combustible component, which, at once ensures the minimum production of combustible pollutants. Another part of the paper describes experiments conducted in traditional fireplaces with a grate, at which well-dried lump wood was combusted.

  20. Mechanical properties of wood

    Science.gov (United States)

    David W. Green; Jerrold E. Winandy; David E. Kretschmann

    1999-01-01

    The mechanical properties presented in this chapter were obtained from tests of small pieces of wood termed “clear” and “straight grained” because they did not contain characteristics such as knots, cross grain, checks, and splits. These test pieces did have anatomical characteristics such as growth rings that occurred in consistent patterns within each piece. Clear...

  1. Wood Composite Adhesives

    Science.gov (United States)

    Gomez-Bueso, Jose; Haupt, Robert

    The global environment, in which phenolic resins are being used for wood composite manufacture, has changed significantly during the last decade. This chapter reviews trends that are driving the use and consumption of phenolic resins around the world. The review begins with recent data on volume usage and regional trends, followed by an analysis of factors affecting global markets. In a section on environmental factors, the impact of recent formaldehyde emission regulations is discussed. The section on economics introduces wood composite production as it relates to the available adhesive systems, with special emphasis on the technical requirement to improve phenolic reactivity. Advances in composite process technology are introduced, especially in regard to the increased demands the improvements place upon adhesive system performance. The specific requirements for the various wood composite families are considered in the context of adhesive performance needs. The results of research into current chemistries are discussed, with a review of recent findings regarding the mechanisms of phenolic condensation and acceleration. Also, the work regarding alternate natural materials, such as carbohydrates, lignins, tannins, and proteinaceous materials, is presented. Finally, new developments in alternative adhesive technologies are reported.

  2. O Banco Mundial e a construção política dos programas de ajustamento estrutural nos anos 1980

    Directory of Open Access Journals (Sweden)

    João Márcio Mendes Pereira

    2013-01-01

    Full Text Available O artigo discute a gestação e operacionalização dos programas de ajustamento estrutural do Banco Mundial ao longo da década de 1980, situando o tema nos marcos das mudanças mais amplas em curso na economia política internacional. O trabalho problematiza a relação entre o Banco Mundial e o seu Estado-membro mais poderoso, os Estados Unidos, mostrando as tensões entre o Executivo e o Congresso em torno da definição da política norte-americana para a instituição. Evidencia-se um conjunto de pressões sobre o Banco que concorreram para delimitar o seu campo de atuação. Mostra-se como a pauta dos programas de ajustamento estrutural cresceu junto com a gestão da crise da dívida externa e a quais interesses a atuação do Banco Mundial serviu.

  3. Interaction of copper wood preservatives and adhesives

    Science.gov (United States)

    Charles R. Frihart

    2003-01-01

    Compared to other substrates, wood is generally easy to bond. However, adhesion is diminished when the wood surface is covered by chemicals, whether natural oils and resins or added chemicals. Among the chemicals added to wood are fire retardants and wood preservatives. Chromated copper arsenate (CCA) has been widely used to protect wood against rot and termites, but...

  4. Modelo Estrutural do Comportamento de Retaliação e Vingança do Consumidor Insatisfeito

    Directory of Open Access Journals (Sweden)

    Daniel Modenesi Andrade

    2013-03-01

    Full Text Available O objetivo principal deste estudo é desenvolver e testar um modelo estrutural do comportamento retaliatório e vingativo como resposta aos fatores cognitivos (percepção de justiça e percepção de traição e emocionais (raiva e desejo por vingança. Podem ser descritos como objetivos específicos que nortearam o estudo: a avaliar as relações entre a percepção de justiça e a percepção de traição sobre os sentimentos provocados pela ofensa/agravo, quais sejam, raiva e desejo por vingança; b combinar cognição e emoção como antecedentes das reações associadas à insatisfação. Para atender tais propósitos, um levantamento com 725 e-consumers foi realizado. A análise do modelo foi realizada por meio de equações estruturais, e os parâmetros gerais do modelo evidenciaram que os dados adequaram-se ao modelo proposto. Sendo assim esta pesquisa contribuiu para a área de estudo destacando a possibilidade de combinar fatores cognitivos e emocionais na predição das reações; demonstrando que o desejo do consumidor por vingança pode ser associado a múltiplas respostas; incluindo a retaliação e vingança; e ainda, incorporando o boca-a-boca eletrônico como comportamento de retaliação no contexto dos estudos de comportamento pós-experiência de compra dos consumidores brasileiros. Assim descobriu-se que todos os fatores cognitivos e a raiva atuam de maneira indireta na predição das reações, e que o desejo por vingança influencia de forma direta tanto os comportamentos retaliatórios quanto os comportamentos vingativos. Para pesquisas futuras um modelo teórico, aplicado a consumidores brasileiros, ajudará no entendimento dos motivos que levam a um comportamento mais extremo do consumidor ofendido.DOI:10.5585/remark.v12i1.2505 

  5. Controlling mold on wood Pallets

    Science.gov (United States)

    Carol A. Clausen

    2012-01-01

    THE WOOD PALLET AND CONTAINER INDUSTRY CONSUMES 4.5 billion board feet (BBF) of hardwoods and 1.8 BBF of softwoods for the annual production of 400-500 million solid wood pallets. While alternative materials such as plastic, corrugated paperboard and metal have entered the market, solid wood remains the material of choice for a majority of pallets on the market (more...

  6. Chapter 1: Wood and Society

    Science.gov (United States)

    Chrisopher D. Risbrudt

    2013-01-01

    Forests, and the wood they produce, have played an important role in human activity since before recorded history. Indeed, one of the first major innovations was utilizing fire, fueled by wood, for cooking and heating. It is very likely that early hominids used wood fires for cooking, as long as 1.5 million years ago (Clark and Harris 1985). Clear evidence of this use...

  7. Wood products and green chemistry

    OpenAIRE

    Pizzi, Antonio

    2016-01-01

    International audience; Key message Green chemistry for and from wood has developed numerous industrial products, namely biosourced, green wood adhesives and preservatives, foams, composite matrices, laminates, hard and flexible plastics, flexible films, and abrasive grinding discs, and their number is still growing.IntroductionThis review addresses (1) the elimination of toxic aldehydes from the most common wood panel adhesive, the one based on urea, itself a natural product, (2) biosourced ...

  8. Survival, growth, wood basic density and wood biomass of seven ...

    African Journals Online (AJOL)

    A performance comparison of seven-year-old individuals of 13 Casuarina species/provenances in terms of survival, growth (diameter, height and volume), wood basic density and wood biomass was undertaken at Kongowe, Kibaha, Tanzania. The trial was laid out using a randomised complete block design with four ...

  9. Corrosion of Fasteners in Wood Treated with Newer Wood Preservatives

    Science.gov (United States)

    Samuel L. Zelinka

    2013-01-01

    This document compiles recent research findings related to corrosion of metals in preservative treated wood into a single report on corrosion of metals in wood. The research was conducted as part of the Research, Technology and Education portion of the National Historic Covered Bridge Preservation (NHCBP) Program administered by the Federal Highway Administration. The...

  10. Effect of Wood Preservatives on Surface Properties of Coated Wood

    Directory of Open Access Journals (Sweden)

    Turgay Ozdemir

    2015-01-01

    Full Text Available Effect of wood preservatives (waterborne and organicborne on the performance of surface finishing properties is investigated. Sapwood of scots pine, (Pinus sylvestris L., oriental beech (Fagus orientalis Lipsky, and chestnut (Castanea sativa Mill. specimens (300 × 100 × 15 mm along the grain were impregnated with aqueous solution of 2% CCA, 2% Tanalith E, 1% boric acid, and Immersol aqua. Surface roughness, dry film thickness, adhesion strength, gloss measurement, scratch, and abrasion resistance were determined according to related standards for treated and untreated samples. The results indicated that surface roughness and adhesion strength depended on wood species and the chemical composition of preservatives. Generally, waterborne wood preservatives increased the surface roughness of wood while the organic-based wood preservatives decreased it. The organic-based wood preservatives decreased adhesion but they increased gloss value. Wood preservatives did not affect the scratch resistance which was found to depend on properties of the coating. All the wood preservatives increased abrasion resistance.

  11. Wood pole overhead lines

    CERN Document Server

    Wareing, Brian

    2005-01-01

    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  12. Properties of seven Colombian woods

    Science.gov (United States)

    B. A. Bendtsen; M. Chudnoff

    1981-01-01

    Woods from abroad are an important raw material to the forest products industries in the United States. A major concern in effective utilization of this resource is the lack of technical information on many species. This report presents the results of an evaluation of the mechanical properties of small, clear specimens of seven Colombian woods. These results are...

  13. The wood of Merovingian weaponry

    Czech Academy of Sciences Publication Activity Database

    Tegel, W.; Muigg, B.; Büntgen, Ulf

    2016-01-01

    Roč. 65, JAN (2016), s. 148-153 ISSN 0305-4403 R&D Projects: GA MŠk(CZ) EE2.3.20.0248 Institutional support: RVO:67179843 Keywords : Early Middle Ages * Merovingian weaponry * Mineralised wood * Wood anatomy Subject RIV: EH - Ecology, Behaviour Impact factor: 2.602, year: 2016

  14. Wood anatomy of the Rhizophoraceae

    NARCIS (Netherlands)

    Vliet, van G.J.C.M.

    1976-01-01

    The wood anatomy of 127 samples of 65 species of all 18 genera of the Rhizophoraceae is described in detail; features not observed here, but recorded in the literature are added. Wood anatomically several groups can be recognized. Three distinct groups are very homogeneous, coinciding with the

  15. Public opinion and wood energy

    Science.gov (United States)

    Sarah Hitchner; John Schelhas; Teppo Hujala; J. Peter Brosius

    2014-01-01

    As wood-based bioenergy continues to develop around the world, it will utilize forestlands in new ways and will have different effects on a number of stakeholders, including forest landowners, local communities, extant industries, policymakers, investors, and others. As more stakeholders become involved in the wood energy web, and as the general public becomes more...

  16. Preservation of forest wood chips

    Energy Technology Data Exchange (ETDEWEB)

    Kofman, P.D.; Thomsen, I.M.; Ohlsson, C.; Leer, E.; Ravn Schmidt, E.; Soerensen, M.; Knudsen, P.

    1999-01-01

    As part of the Danish Energy Research Programme on biomass utilisation for energy production (EFP), this project concerns problems connected to the handling and storing of wood chips. In this project, the possibility of preserving wood chips of the Norway Spruce (Picea Abies) is addressed, and the potential improvements by anaerobic storage are tested. Preservation of wood chips aims at reducing dry matter losses from extensive heating during storage and to reduce production of fungal spores. Fungal spores pose a health hazards to workers handling the chips. Further the producers of wood chips are interested in such a method since it would enable them to give a guarantee for the delivery of homogeneous wood chips also during the winter period. Three different types of wood chips were stored airtight and further one of these was stored in accordance with normal practise and use as reference. The results showed that airtight storage had a beneficial impact on the quality of the chips: no redistribution of moisture, low dry matter losses, unfavourable conditions for microbial activity of most fungi, and the promotion of yeasts instead of fungi with airborne spores. Likewise the firing tests showed that no combustion problems, and no increased risk to the environment or to the health of staff is caused by anaerobic storage of wood chips. In all, the tests of the anaerobic storage method of forest wood chips were a success and a large-scale test of the method will be carried out in 1999. (au)

  17. WOOD CELLULOSE ACETATE MEMBRANE 179

    African Journals Online (AJOL)

    DR. AMINU

    2013-06-01

    Jun 1, 2013 ... permeability, swellability in organic liquids and organic liquid separation potentials. The ... currently employed to deal with some of these wastes, ... a waste. This is because the wood has poor mechanical strength and cannot be used as structural support in most buildings. Although used as fuel(fire wood) ...

  18. Metal bats more like wood

    National Research Council Canada - National Science Library

    Gardiner, Andy

    2011-01-01

    ... Coefficient of Resolution (BBCOR), which brings bats even closer to duplicating the properties of wood. "I would have preferred to go more slowly," said Mark Marquess, who has two national championships during his 35 years as Stanford's coach. "Everyone likes the idea of becoming more like wood, but let's say all our games were 2-1 and our attendanc...

  19. Composites from wood and plastics

    Science.gov (United States)

    Craig Clemons

    2010-01-01

    Composites made from thermoplastics and fillers or reinforcements derived from wood or other natural fibers are a dynamic research area encompassing a wide variety of composite materials. For example, as the use of biopolymers grows, wood and other natural fiber sources are being investigated as renewable sources of fillers and reinforcements to modify performance....

  20. Método para avaliação da segurança de edificios durante a recuperação estrutural dos pilares

    Directory of Open Access Journals (Sweden)

    T. J. da Silva

    Full Text Available As estruturas se deterioram pela ação das intempéries e de outros fatores requerendo intervenções que variam de um reparo superficial a um reforço mais complexo. A análise da segurança em edifícios existentes difere em vários aspectos daquela estabelecida em projeto, principalmente porque os parâmetros adotados genericamente pelos projetistas poderão ser mais bem definidos mediante uma investi- gação in loco no momento da intervenção. Este trabalho aborda as condições de segurança em que são realizados os serviços de recu- peração estrutural de pilares e apresenta uma metodologia que leva em conta a redução de incertezas relacionadas aos parâmetros de resistência e de solicitação. A estrutura do edifício é modelada em programas de cálculo, buscando-se obter esforços mais compatíveis com o reduzido período analisado. A metodologia indica como ajustar os coeficientes de ponderação e a obter um coeficiente global de segurança para pilares, que permite traçar a estratégia de execução do reparo, mantendo uma probabilidade de falha coerente com a ex- istência da estrutura. Como resultado da metodologia proposta, se obtém a parte da seção de concreto e aço que será, temporariamente, possível retirar do pilar, em um edifício em recuperação estrutural devido a um processo de corrosão das armaduras ou deterioração do concreto. A metodologia aqui proposta foi aplicada em três edifícios sendo que um deles encontra-se relatado neste trabalho. Os elementos estruturais objeto da aplicação foram os pilares da garagem de um edifício de 25 pavimentos com simulação de recuperação estrutural devido a um processo de corrosão inicial das armaduras. Após a análise foi possível definir o tipo de procedimento que seria adotado para cada pilar.

  1. Characterisation of wood combustion ashes

    DEFF Research Database (Denmark)

    Maresca, Alberto

    for their composition and leaching properties. Despite the relatively large variations in the contents of nutrients and trace metals, the overall levels were comparable to typical ranges reported in the literature for other wood combustion ashes, as well as with regards to leaching. In general, the composition......The combustion of wood chips and wood pellets for the production of renewable energy in Denmark increased from 5.7 PJ to 16 PJ during the period 2000-2015, and further increases are expected to occur within the coming years. In 2012, about 22,300 tonnes of wood ashes were generated in Denmark....... Currently, these ashes are mainly landfilled, despite Danish legislation allowing their application onto forest and agricultural soils for fertilising and/or liming purposes. During this PhD work, 16 wood ash samples generated at ten different Danish combustion plants were collected and characterised...

  2. Origin of Petrified Wood Color

    Directory of Open Access Journals (Sweden)

    George Mustoe

    2016-05-01

    Full Text Available Fossil forests have world-wide distribution, commonly preserving mineralized wood that displays vivid hues and complex color patterns. However, the origin of petrified color has received little scientific attention. Color of silicified wood may be influenced by the presence of relict organic matter, but the most significant contribution comes from trace metals. This study reports quantitative analysis of trace metals in 35 silicified wood samples, determined using LA-ICP-MS spectrometry. The most important of these metals is Fe, which can produce a rainbow of hues depending on its abundance and oxidation state. Cr is the dominant colorant for bright green fossil wood from Arizona, USA and Zimbabwe, Africa. Complex color patterns result from the progressive nature of the fossilization process, which causes wood to have varying degrees of permeability during successive episodes of permineralization. These processes include simple diffusion, chromatographic separation, infiltration of groundwater along fractures and void spaces, and oxidation/reduction.

  3. Utilizing wood wastes as reinforcement in wood cement composite bricks

    Directory of Open Access Journals (Sweden)

    Nusirat Aderinsola Sadiku

    2015-07-01

    Full Text Available This paper presents the research work undertaken to study the properties of Wood Cement Composite Bricks (WCCB from different wood wastes and cement / wood content. The WCBBs with nominal density of 1200 kg m-3 were produced from three tropical wood species and at varying cement and wood content of 2:1, 2.5:1 and 3:1 on a weight to weight basis. The properties evaluated were compressive strength, Ultra Pulse Velocity (UPV, water absorption (WA and thickness swelling (TS. The Compressive strength values ranged from 0.25 to 1.13 N mm-2 and UPV values ranged from 18753 to 49992 m s-1. The mean values of WA after 672 hours (28 days of water soaking of the WCCBs ranged from 9.50% to 47.13% where there were no noticeable change in the TS of the bricks. The observed density (OD ranged from 627 to 1159 kg m-3. A. zygia from the three wood/cement content were more dimensionally stable and better in compressive strength than the other two species where T. scleroxylon had the best performance in terms of UPV. All the properties improved with increasing cement content. WCCBs at 3.0:1 cement/wood content are suitable for structural application such as panelling, ceiling and partitioning

  4. Structural sustainability of cambisol under different land use system Sustentabilidade estrutural de um cambissolo sob diferentes sistemas de uso

    Directory of Open Access Journals (Sweden)

    Paula Cristina Caruana Martins

    2012-12-01

    deste estudo foi avaliar as alterações da estrutura de um Cambissolo sob seis sistemas de uso da terra por meio dos modelos de capacidade de suporte de carga. A amostragem foi realizada na região Amazônica, Brasil, nos seguintes sistemas de uso: a floresta secundária nova; b floresta secundária velha; c floresta; d pastagem; e roça; e f agrofloresta. Para obter os modelos de capacidade de suporte de carga, as amostras indeformadas foram coletadas nesses sistemas de uso da terra e submetidas ao ensaio de compressão uniaxial. Esses modelos foram usados para avaliar qual sistema de uso da terra preserva ou degrada a estrutura do Cambissolo. Os resultados da densidade do solo e porosidade total do solo não foram adequados para quantificar a degradação estrutural do Cambissolo. Utilizando a profundidade de 0-0,03 m da floresta como referência, observou-se que a pastagem foi o sistema de uso da terra que mais promoveu degradação da estrutura do solo, ao passo que a estrutura foi mais preservada na floresta secundária velha, roça e floresta. Na profundidade de 0,10-0,13 m, a estrutura do solo foi mais degradada no sistema de cultivo roça e mais preservada na floresta secundária jovem e pastagem. Na profundidade de 0,20-0,23 m, a degradação da estrutura do solo foi mais intensa na floresta secundária velha e mais preservada na floresta secundária nova, roça e agrofloresta.

  5. Reuso da água da chuva na produção de blocos de concreto não estrutural

    OpenAIRE

    Oliveira, João Paulo Gama; Silva, Luana Celeste; Fernandes, Fernando A. da S.; Paz, Lidiane A. F. da

    2016-01-01

    A água é essencial em todas as esferas da vida humana. Dentre elas a construção civil. Não considerada como material de construção, a água é consumida em grande escala nos canteiros de obra, concreteiras e na produção de blocos de concreto. O uso inteligente e alternativas sustentáveis reduzem o consumo e aliam progresso e produção limpa. O reuso da água da chuva se mostrou uma solução eficaz e lucrativa para uma fábrica de blocos de concreto não estrutural na cidade de Palmas, no estado do T...

  6. O diagnóstico estrutural e sua relação com a transferência em um tratamento analítico

    Directory of Open Access Journals (Sweden)

    Walkiria Helena Grant

    2007-12-01

    Full Text Available Busca-se refletir, a partir de um enfoque psicanalítico, sobre a questão do diagnóstico estrutural em um caso clínico e sua relação com o lugar que o analista ocupa na relação transferencial. Com base nos fenômenos relatados durante as sessões, destaca-se um leque de possibilidades quanto ao diagnóstico estrutural do caso - neurose, psicose ou perversão -, ressaltando-se que ele só pode ser pensado com base na especificidade da relação transferencial estabelecida com o analista. Uma particularidade deste caso clínico permitiu abordar o lugar que o tecido significante da poesia e da música ocupou diante do sem-sentido da morte.A structural diagnostic and its relationship with transference in analytical treatment. In this article my aim will be to reflect, from a psychoanalytic view, on the question of structural diagnosis in a clinical case and its relationship with transference. Based on the phenomenon described during the sessions I pinpoint several possible structural diagnosis of the case - neurosis, psychosis, or perversion - and highlight the fact that the diagnosis can only be considered based on the specificity of the transference relationship established with the analyst. A characteristic of this specific clinical case was that it allowed us to analyze the role the poetry and music significant played in facing the senselessness of death.

  7. Non_standard Wood

    DEFF Research Database (Denmark)

    Tamke, Martin

    . Using parametric design tools and computer controlled production facilities Copenhagens Centre for IT and Architecture undertook a practice based research into performance based non-standard element design and mass customization techniques. In close cooperation with wood construction software......Non-Standard elements in architecture bear the promise of a better more specific performance (Oosterhuis 2003). A new understanding of design evolves, which is focusing on open ended approaches, able to negotiate between shifting requirements and to integrate knowledge on process and material......- and machine industry we fabricated a 1:1 demonstrator show casing the potential for performance due to digital fabrication in this sustainable material. The production of a custom made design tool helped not only to explore design variations while keeping up the link to digital production machinery...

  8. Cooling of wood briquettes

    Directory of Open Access Journals (Sweden)

    Adžić Miroljub M.

    2013-01-01

    Full Text Available This paper is concerned with the experimental research of surface temperature of wood briquettes during cooling phase along the cooling line. The cooling phase is an important part of the briquette production technology. It should be performed with care, otherwise the quality of briquettes could deteriorate and possible changes of combustion characteristics of briquettes could happen. The briquette surface temperature was measured with an IR camera and a surface temperature probe at 42 sections. It was found that the temperature of briquette surface dropped from 68 to 34°C after 7 minutes spent at the cooling line. The temperature at the center of briquette, during the 6 hour storage, decreased to 38°C.

  9. Treatments that enhance physical properties of wood

    Science.gov (United States)

    Roger M. Rowell; Peggy Konkol

    1987-01-01

    This paper was prepared for anyone who wants to know more about enhancing wood’s physical properties, from the amateur wood carver to the president of a forest products company. The authors describe chemical and physical treatments of wood that enhance the strength, stiffness, water repellency, and stability of wood. Five types of treatments are described: 1. water-...

  10. Physical properties and moisture relations of wood

    Science.gov (United States)

    William Simpson; Anton TenWolde

    1999-01-01

    The versatility of wood is demonstrated by a wide variety of products. This variety is a result of a spectrum of desirable physical characteristics or properties among the many species of wood. In many cases, more than one property of wood is important to the end product. For example, to select a wood species for a product, the value of appearance- type properties,...

  11. Moisture relations and physical properties of wood

    Science.gov (United States)

    Samuel V. Glass; Samuel L. Zelinka

    2010-01-01

    Wood, like many natural materials, is hygroscopic; it takes on moisture from the surrounding environment. Moisture exchange between wood and air depends on the relative humidity and temperature of the air and the current amount of water in the wood. This moisture relationship has an important influence on wood properties and performance. Many of the challenges of using...

  12. Wood Condition Assessment Manual: Second Edition

    Science.gov (United States)

    Robert J. Ross; Robert H. White

    2014-01-01

    This report summarizes information on condition assessment of in-service wood, including visual inspection of wood and timbers, use of ultrasound and probing/boring techniques for inspection, and assessment of wood and timbers that have been exposed to fire. The report also includes information on assigning allowable design values for in-service wood.

  13. The challenge of bonding treated wood

    Science.gov (United States)

    Charles R. Frihart

    2004-01-01

    Wood products are quite durable if exposure to moisture is minimized; however, most uses of wood involve considerable exposure to moisture. To preserve the wood, chemicals are used to minimize moisture pickup, to prevent insect attack, and/or to resist microbial growth. The chemicals used as preservatives can interfere with adhesive bonds to wood. Given the many...

  14. Fire resistance of exposed wood members

    Science.gov (United States)

    Robert H. White

    2004-01-01

    Fire resistance data on exposed wood beams and columns are plentiful, but few studies have been done on exposed wood members in tension and in decks. To provide data to verify the application of a new calculation procedure, a limited series of fire resistance tests were conducted on wood members loaded in tension and on exposed wood decks.

  15. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)

    User

    2011-04-19

    Apr 19, 2011 ... Collect wood flour or chips from the lathe or table saw or vertical sander from other machines that produce the desired wood particles/ sawdust. If it is possible grind appropriate dry wood for use. Note: Wood flour or chips from cherry, maple (temperate trees) mahogany, teak and walnut (ekom in Ibibio ...

  16. Wood Technology: Techniques, Processes, and Products

    Science.gov (United States)

    Oatman, Olan

    1975-01-01

    Seven areas of wood technology illustrates applicable techniques, processes, and products for an industrial arts woodworking curriculum. They are: wood lamination; PEG (polyethylene glycol) diffusion processes; wood flour and/or particle molding; production product of industry; WPC (wood-plastic-composition) process; residential construction; and…

  17. Fire Safety Design of Wood Structures

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    2006-01-01

    Lecture Notes on Fire Safety Design of Wood Structures including charring of wood and load bearing capacity of beams, columns, and connections.......Lecture Notes on Fire Safety Design of Wood Structures including charring of wood and load bearing capacity of beams, columns, and connections....

  18. The Carbon Impacts of Wood Products

    Science.gov (United States)

    Richard Bergman; Maureen Puettmann; Adam Taylor; Kenneth E. Skog

    2014-01-01

    Wood products have many environmental advantages over nonwood alternatives. Documenting and publicizing these merits helps the future competitiveness of wood when climate change impacts are being considered. The manufacture of wood products requires less fossil fuel than nonwood alternative building materials such as concrete, metals, or plastics. By nature, wood is...

  19. Bioprocessing preservative-treated waste wood

    Science.gov (United States)

    Barbara L. Illman; Vina W. Yang; Les. Ferge

    2000-01-01

    Disposal of preservative-treated waste wood is a growing problem worldwide. Bioprocessing the treated wood offers one approach to waste management under certain conditions. One goal is to use wood decay fungi to reduce the volume of waste with an easily managed system in a cost-effective manner. Wood decay fungi were obtained from culture collections in the Mycology...

  20. Oxalate analysis methodology for decayed wood

    Science.gov (United States)

    Carol A. Clausen; William Kenealy; Patricia K. Lebow

    2008-01-01

    Oxalate from partially decayed southern pine wood was analyzed by HPLC or colorimetric assay. Oxalate extraction efficiency, assessed by comparing analysis of whole wood cubes with ground wood, showed that both wood geometries could be extracted with comparable efficiency. To differentiate soluble oxalate from total oxalate, three extraction methods were assessed,...

  1. Potential wood protection strategies using physiological requirements of wood degrading fungi

    NARCIS (Netherlands)

    Sailer, M.F.; Etten, B.D. van

    2004-01-01

    Due to the increasing restrictions in the use of wood preserving biocides a number of potential biocide free wood preserving alternatives are currently assessed. Wood degrading fungi require certain conditions in the wood in order to be able to use wood as a food source. This paper discusses the

  2. Wood Scrap Project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Beachy, D.

    1983-01-01

    This study investigated Utah's sawmill residue, logging residue and pinyon-juniper resource for use as an energy resource to replace supplement conventional fuels now in use. This was accomplished by analyzing existing and future supplies of wood suitable for energy use on a renewable basis and the cost effectiveness of using wood as compared to coal, natural gas, and propane. The promotion of the use and development of wood as a renewable resource to reduce Utah's dependency for selected residential, institutional, commercial, and industrial markets for conventional non-renewable forms of energy is also considered. 84 references, 21 figures, 32 tables.

  3. USANS study of wood structure

    Energy Technology Data Exchange (ETDEWEB)

    Garvey, Christopher J. [Australian Nuclear Science and Technology Organisation, PMB 1, Menai, NSW 2234 (Australia)]. E-mail: Chris.Garvey@ansto.gov.au; Knott, Robert B. [Australian Nuclear Science and Technology Organisation, PMB 1, Menai, NSW 2234 (Australia); Searson, Matthew [Centre for Horticulture and Plant Sciences, Hawkesbury Campus, University of Western Sydney (Australia); Conroy, Jann P. [Centre for Horticulture and Plant Sciences, Hawkesbury Campus, University of Western Sydney (Australia)

    2006-11-15

    Wood performs a vascular and structural function in trees. In this study we used the double-crystal diffractometer BT5 at the NIST Center for Neutron Scattering (Gaithersburg, USA) to study the pore structure inside wood sections. The slit-smeared intensity of scattered neutrons was measured from wood sections in directions parallel, orthogonal and transverse to the tree's trunk axis over a scattering vector range 0.00004-0.002 A{sup -1}. The interpretation of the data in terms of a reductionist model consisting of infinitely long cylinders (cell lumens) is discussed.

  4. COMBUSTION PROPERTIES OF EUCALYPTUS WOOD

    Directory of Open Access Journals (Sweden)

    Yalçın ÖRS

    1999-03-01

    Full Text Available In this study, the combustion properties of some impregnation materials (abiotic and biotic factors used for eucalyptus wood in interior or exterior environments were investigated. The experimental samples were prepared from Eucalyptus wood based on ASTM-D-1413-76 Tanalith-CBC, boric acid, borax, vacsol-WR, immersol-WR, polyethylen glycole-400 and ammonium sulphate were used as an impregnation material. The results indicated that, vacuum treatment on Eucalyptus gave the lowest retention value of salts. Compounds containing boron+salt increased fire resistance however water repellents decreased the wood flammability.

  5. Cellular aspects of wood formation

    National Research Council Canada - National Science Library

    Fromm, Jörg

    2013-01-01

    With today's ever growing economic and ecological problems, wood as a raw material takes on increasing significance as the most important renewable source of energy and as industrial feedstock for numerous products...

  6. On Erdos–Wood's conjecture

    Indian Academy of Sciences (India)

    Woods conjecture with = 2 is at least /(log ) for some positive constant > 2. ... Institute of Mathematical Sciences, C.I.T. Campus, 4th Cross Street, Taramani, Chennai 600 113, India; Harish-Chandra Research Institute, Chhatnag Road, ...

  7. Wood-pastures of Europe

    DEFF Research Database (Denmark)

    Plieninger, Tobias; Hartel, Tibor; Martín-López, Berta

    2015-01-01

    Wood-pastures are archetypes of High Nature Value Farmlands in Europe and hold exceptional ecological, social, and cultural values. Yet, wood-pastures have been through a sharp decline all over Europe, mainly due to processes of agricultural intensification and abandonment. Recently, wood......-pastures have found increasing attention from conservation science and policy across Europe. In this paper we (i) perform the first pan-European assessment of wood-pastures, considering individual countries and biogeographic regions, (ii) present the ecological and social-cultural values of a wide diversity......). They are distributed across all biogeographical regions, but more abundantly in the Mediterranean and Eastern European countries. Substantial ecological values are revealed in terms of landscape level biodiversity, ecosystem dynamics, and genetic resources. Social-cultural values are related to aesthetic values...

  8. Wood and Paper Manufacturing Sectors

    Science.gov (United States)

    Find EPA regulatory information for the wood product and paper manufacturing sectors, including paper, pulp and lumber. Information includes NESHAPs and effluent guidelines for pulp and paper rulemaking, and compliance guidelines

  9. Wood siding : installing, finishing, maintaining

    Science.gov (United States)

    W.C. Feist; A.E. Oviatt

    1983-01-01

    Wood siding is put on houses for many good reasons. One reason is that it will keep the bright new “face” of any home attractive for many years to come. In fact, given reasonable care, wood siding will retain its beauty for centuries, as has been amply proved by its performance on houses that date back to early colonial times. It also has great versatility; and the...

  10. EVOLUTION OF LIGHTWEIGHT WOOD COMPOSITES

    OpenAIRE

    Marius C. BARBU

    2016-01-01

    Lightweight boards and beams in the wood-based construction and furniture industry are not a new topic. The density reduction of panels using sandwich structure with light cores was confirmed by users like doors or mobile homes more than three decades ago. Today many ways to attain a lighter wooden structure are on offer, partially in industrial application. The first one is the use of light-weight wood species like balsa, lime, pine from southern hemisphere plantations etc. limit...

  11. Efeitos hemostático e estrutural da esponja de celulose liofilizada Hemostatic and structural effects of lyophilized cellulose sponge

    Directory of Open Access Journals (Sweden)

    LUÍS RENATO MELLO

    1998-09-01

    Full Text Available Os efeitos hemostáticos da celulose oxidada (Surgicel são bem conhecidos. Baseados na similaridade estrutural e em um possível efeito hemostático, estudamos a esponja de celulose liofilizada utilizando dois modelos experimentais. Fase I - Realizada em 12 cães, consistiu na provocação de lesão cortical com sangramento, introdução de fragmento de esponja de celulose liofilizada no interior da lesão e medida do tempo necessário para obter-se hemostasia. Os animais foram sacrificados em 7, 30 e 90 dias. A hemostasia foi obtida, em média, após 1 minuto e nenhum efeito colateral clínico foi detectado. A microscopia mostrou reação histiocitária leve aos 7 e 30 dias, com presença de pequena quantidade de células gigantes tipo corpo estranho. A reação histioplasmocitária regrediu e, aos 90 dias, a celulose estava circundada por pobre reação inflamatória. A membrana liofilizada revelou ter aspecto peculiar, representado por filamentos eosinofílicos, circundados por reação inflamatória, que diminuiu com o tempo. Somente esparsos e irregulares filamenos eosinofílicos foram percebidos aos 90 dias. Fase II - Foram introduzidos fragmentos de dimensões conhecidas de esponja de celulose, no interior do fígado de 12 ratos, que foram sacrificados em 7, 30 e 90 dias. Na autopsia, a inspeção a olho desarmado constatou, aos 30 e 90 dias, a formação de bridas peritoneais na altura do implante. Em todos os animais, especialmente aos 7 dias, a microscopia revelou intensa reação histiolinfoplasmocitária ao redor do implante. Em dois animais, aos 90 dias, detectaram-se grânulos refringentes à luz polarizada, no interior de células gigantes, demonstrando fagocitose ativa de celulose. Em conclusão, observou-se haver necessidade de modelo experimental comparativo para provar a existência de propriedades hemostáticas na esponja. Conseguiu-se, no entanto, provar a existência de reabsorção da celulose em mamíferos através de

  12. Life cycle environmental impacts of different construction wood waste and wood packaging waste processing methods

    OpenAIRE

    Manninen, Kaisa; Judl, Jáchym; Myllymaa, Tuuli

    2016-01-01

    This study compared the life cycle environmental impacts of different wood waste processing methods in three impact categories: climate impact, acidification impacts and eutrophication impacts. The wood waste recovery methods examined were the use of wood waste in terrace boards made out of wood composite which replace impregnated terrace boards, incineration of wood waste in a multi-fuel boiler instead of peat and the use of wood waste in the production of particleboard in either Finland or ...

  13. Estudo para a padronização das dimensões de unidades de alvenaria estrutural no Brasil através do uso da coordenação modular

    OpenAIRE

    Dóris Zechmeister

    2005-01-01

    Este estudo apresenta uma proposta para a padronização das dimensões de unidades de alvenaria estrutural no Brasil. Para isso, primeiramente são discutidos os benefícios da aplicação da teoria da coordenação modular na alvenaria estrutural, através da relação da coordenação modular com a arquitetura e da síntese dos seus princípios fundamentais. Tendo sempre o foco na padronização do componente modular e no seu uso em projetos coordenados modularmente. Em seguida, é apresentada a situação da ...

  14. A guide to residential wood heating

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    Wood heating has a long history in Canada. Currently over three million Canadian households use wood-burning appliances for heating, or just to enjoy the ambience of a wood fire. This guide is one of a series of guides on renewable energy systems for residential use, compiled to assist Canadian householders to make informed decisions on renewable energy. This particular guide focuses on such matters as how to maintain the safety and efficiency of a wood heating system; how to purchase and store fuel wood; how to use fire management techniques for cleaner, virtually smokeless fires; and provides tips on what to ask when consulting wood-heating professionals. tabs., figs.

  15. Efeitos das cardioplegias sangüínea e cristalóide no miocárdio hipertrófico de coelho: avaliação estrutural e ultra-estrutural Effects of myocardial protection in hypertrophic rabbit hearts: structural and ultra structural analysis

    Directory of Open Access Journals (Sweden)

    Elthon Silveira Cressoni

    2007-03-01

    Full Text Available OBJETIVO: Comparar e avaliar experimentalmente as alterações estruturais e ultra-estruturais em corações hipertrofiados isolados de coelhos submetidos à parada protegida pela solução de cardioplegia sangüínea e cardioplegia cristalóide. MÉTODO: O estudo compreendeu um grupo controle e dois grupos experimentais. No grupo I, a parada cardíaca foi obtida pela infusão da solução de cardioplegia sangüínea contínua e tépida. No grupo II, a parada cardíaca foi conseguida pela infusão da solução de cardioplegia cristalóide intermitente e fria. No grupo controle, os corações foram submetidos à parada anóxia normotérmica por 45 minutos. Após experimentos, oito amostras da parede lateral do ventrículo esquerdo foram coletadas e fixadas em formaldeído 10% e glutaraldeído 2,5% para análises estrutural e ultra-estrutural. RESULTADOS: Os resultados estruturais e as descrições ultra-estruturais mostraram que os corações submetidos à parada protegida pela cardioplegia sangüínea contínua e tépida (grupo I estavam mais preservados com alterações celulares menos acentuadas se comparados aos submetidos à parada protegida pela cardioplegia cristalóide intermitente e fria (grupo II e ao grupo controle. CONCLUSÃO: A cardioplegia sangüínea contínua e tépida (Grupo I foi mais eficiente na preservação da integridade estrutural e ultra-estrutural do miocárdio, quando comparada à cardioplegia cristalóide intermitente e fria (Grupo II.OBJECTIVE: To experimentally compare the structural and ultrastructural changes in isolated hypertrophied rabbits' hearts submitted to cardiac arrest protected using sanguineous and crystalloid cardioplegia solutions. METHOD: The study comprised two experimental groups and one control group. In Experimental Group I, cardiac arrest was achieved by the continuous infusion of tepid sanguineous cardioplegia solution. In Experimental Group II, cardiac arrest was obtained by an intermittent

  16. Reactivity and burnout of wood fuels

    DEFF Research Database (Denmark)

    Dall'Ora, Michelangelo

    of different aspects relevant to wood combustion, including wood structure and composition, wood pyrolysis, wood char properties and wood char oxidation. The full scale campaign, which is the subject of Chapter 3, included sampling of wood fuel before and after milling and sampling of gas and particles...... at the top of the combustion chamber. The collected samples and data are used to obtain an evaluation of the mills in operation at the power plant, the particle size distribution of the wood fuel, as well as the char conversion attained in the furnace. In Chapter 4 an experimental investigation...... reactivity. Char yield from fast pyrolysis (104 – 105 K/s) was as low as 1 to 6 % on a dry ash free basis, whereas it was about 15-17 % for slow pyrolysis (10 - 20 K/min); char yield decreased as pyrolysis temperature increased. During fast pyrolysis wood particles underwent melting, yet to different extents...

  17. Ergonomics and safety in secondary wood processing

    Science.gov (United States)

    Rado Gazo; James D. McGlothlin; Yuehwern, Wiedenbeck, Jan Yih; Yuehwern Yih

    2002-01-01

    The main goal of the project was to initiate a pilot program in ergonomics for the secondary wood products industry. Case studies were conducted at three Midwest secondary wood product companies in 2000 and 2001.

  18. Strange Creatures: An Additive Wood Sculpture Project.

    Science.gov (United States)

    Wales, Andrew

    2002-01-01

    Describes an art project where students create strange creatures using scraps of wood. Discusses how the students use the wood and other materials. Explains that the students also write about the habitat characteristics of their creatures. Includes learning objectives. (CMK)

  19. Three Construction Projects with Wood Scraps

    Science.gov (United States)

    Levine, Elizabeth

    1977-01-01

    Wood, a natural material, appeals to children of all ages. Wood construction allows children the flexibility of moving parts of their work around until they are satisfied with the arrangement. Three projects are described. (Author/RK)

  20. SYNERGISTIC WOOD PRESERVATIVES FOR REPLACEMENT OF CCA

    Science.gov (United States)

    The objective of this project was to evaluate the potential synergistic combinations of environmentally-safe biocides as wood preservatives. These wood preservatives could be potential replacements for the heavy-metal based CCA.Didecyldimethylammonium chloride [DDAC] was...

  1. Wood: a construction material for tall buildings

    Science.gov (United States)

    Wimmers, Guido

    2017-12-01

    Wood has great potential as a building material, because it is strong and lightweight, environmentally friendly and can be used in prefabricated buildings. However, only changes in building codes will make wood competitive with steel and concrete.

  2. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites

    Science.gov (United States)

    Nicole M. Stark; Robert E. Rowlands

    2003-01-01

    Commercial wood flour, the most common wood-derived filler for thermoplastics, is produced in a mixture of particle sizes and generally has a lower aspect ratio than wood and other natural fibers. To understand how wood flour and fiber characteristics influence the mechanical properties of polypropylene composites, we first investigated the effect of different sizes of...

  3. Wood preservatives and pressure-treated wood: considerations for historic-preservation projects

    Science.gov (United States)

    Ronald W. Anthony; Stan T. Lebow

    2015-01-01

    Wood, an abundant resource throughout most of the world, has been used as a building material for thousands of years. Many historic buildings have been built primarily of wood, and masonry and stone buildings generally have wood elements, both structural and architectural. As a biological material, wood is both remarkably complex and yet quite durable if well...

  4. Wood-burning stoves worldwide

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo

    More than any time in our history, the wood-burning stove continues to be the most popular technology used for cooking and heating worldwide. According to the World Health Organization and recent scientific studies, the inefficient use of solid-fuels in traditional stoves constitutes the major...... systems, improved efficient retrofits and advanced stove innovations. In chapter 3, four popular wood-burning practices found in five countries were singled-out to be examined closely in four case studies: “cooking in Brazil”, “cooking and heating in Peru”, “heating in Portugal” and “recreational heat...

  5. Fuel wood symposium; Symposium Energieholz

    Energy Technology Data Exchange (ETDEWEB)

    Wild, C.; Wauer, A. (comps.)

    2001-07-01

    The Bavarian State Institute of Forestry (LWF) organised a 'Fuel Wood Symposium' in Freising-Weihenstephan on 17.11.2000. The purpose of this specialist conference was to give an overview of the use of biomass, especially wood, as an source of energy. (orig.) [German] Die Bayerische Landesanstalt fuer Wald und Forstwirtschaft richtete am 17.11.2000 in Freising-Weihenstephan das 'Symposium Energieholz' aus. Ziel der Fachtagung war es, einen Ueberblick ueber die energetische Nutzung von Biomasse, insbesondere Holz, zu geben. (orig.)

  6. Selected mechanical properties of modified beech wood

    Directory of Open Access Journals (Sweden)

    Jiří Holan

    2008-01-01

    Full Text Available This thesis deals with an examination of mechanical properties of ammonia treated beach wood with a trademark Lignamon. For determination mechanical properties were used procedures especially based on ČSN. From the results is noticeable increased density of wood by 22% in comparison with untreated beach wood, which makes considerable increase of the most mechanical wood properties. Considering failure strength was raised by 32% and modulus of elasticity was raised at average about 46%.

  7. Wood fuel markets in Northern Europe

    OpenAIRE

    Olsson, Olle

    2012-01-01

    High fossil fuel prices and ambitions to reduce greenhouse gas emissions have increased demand for renewable energy and are changing wood fuel market structures. Wood fuels are to a rapidly growing degree used in industrial proportions and traded in commercial markets. Wood fuels are seen as a key component to achieve policy goals related to climate change, especially in the EU. In the six papers that form the basis for this thesis, prices of wood fuels in Northern Europe are analyzed by mea...

  8. Characterization of sediment from the dredging of storm water channels in the city of Salvador-BA, Brazil aiming to use in structural ceramics; Caracterizacao de sedimento proveniente de dragagem de canais pluviais do municipio de Salvador-BA visando sua utilizacao em ceramica estrutural

    Energy Technology Data Exchange (ETDEWEB)

    Santos, O.C.; Breitenbach, S.B.; Coelho, R.E., E-mail: engcruz@ig.com.br, E-mail: silviabb@ifba.edu.br, E-mail: rodrigoecoelho@gmail.com [Instituto Federal de Educacao, Ciencia e Tecnologia da Bahia (IFBA), Salvador (Brazil); Andrade, J.C.S.; Sales Junior, J.C.C., E-mail: jean.engmateriais@gmail.com, E-mail: jccalado@gmail.com [Universidade Federal do Amazonas (UFAM), Manaus (Brazil). Dept. de Engenharia de Materiais; Paskocimas, C.A.; Martinelli, A.E.; Nascimento, R.M., E-mail: paskocimas@uol.com.br, E-mail: aemart@uol.com.br, E-mail: rubensmaribondo@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

    2017-01-15

    The aim of this study was to characterize sediment from the dredging of storm water channels (Scp) in the city of Salvador, Bahia, aiming its maximum replacement by clay in structural ceramics, since this binary mixture is part of the pilot project of the standard mass, in the research of interlocked block ceramic formulation. Initially, the sediment was submitted to the following tests: plasticity index; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; thermal and particle size analyses. The morphology of the material was analyzed by scanning electron microscopy, coupled with energy dispersive spectroscopy. Then, sediment (Scp) was added to clay from the municipality of Candelas, Bahia, in the proportions of 10, 20, 30 and 40 wt%. Specimens were prepared by uniaxial pressing in dimensions of 60 mm x 20 mm, with compacting pressure of 25 MPa, and the material was humidified with 8% of water. Firing was conducted in resistive furnace at temperatures of 850, 950 and 1050 deg C, with 5 deg C / min heating rate. The properties evaluated were: linear shrinkage; water absorption and modulus of rupture. The results indicated the possibility of using SCP in structural ceramics by the prerequisites required in standards, in the manufacture of tiles, sealing blocks and bricks. (author)

  9. Morphological and structural characterization of the Zn{sub 0,9}Mn{sub 0,1}O powder synthesized by combustion reaction and Pechini; Caracterizacao estrutural e morfologica de pos de Zn{sub 0,9}Mn{sub 0,1}O sintetizados por reacao de combustao e metodo Pechini

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, M.A.; Torquato, R.; Simoes, A.N.; Costa, A.C.F.M.; Gama, L., E-mail: anacristina@dema.ufcg.edu.b [Universidade Federal de Campina Grande (DEMA/UFCG), PB (Brazil). Dept. de Engenharia dos Materiais; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (DEMA/UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2009-07-01

    Zinc oxide, due to the piezoelectric and electro-optical characteristics, is used in application such as, chemical sensor, varistor, transparent conductive thin film and DMS. The aim of this work is to evaluate and compare structural and morphological characteristics of nanometric powders of Zn{sub 0,9}Mn{sub 0,1}O prepared by chemical synthesis of combustion reaction and Pechini method. The powders were characterized by XRD, SEM and BET. The XRD data shown to both studied method the presence of ZnO phase with hexagonal structure and without second phase. The powder prepared by combustion reaction presented 9% of reduction in crystallinity and 42% of increase in surface area in comparison with the powder prepared by Pechini method. The morphological analysis of the powder showed that both method produce powders with soft agglomerates constituted by nano size particles. (author)

  10. Optical and structural characterization of the pure and doped BaY{sub 2}F{sub 8} with rare earths for application in radiation detectors and scintillators; Caracterizacao optica e estrutural do BaY{sub 2}F{sub 8} puro e dopado com terras raras visando aplicacao em detectores de radiacao e cintiladores

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Ana Carolina Santana de

    2008-07-01

    In this work Barium Yttrium Fluoride (BaY{sub 2}F{sub 8} -BaYF) doped with different concentrations of ions Tb{sup 3+}, Er{sup 3+}, Tm{sup 3+} e Nd{sup 3+} were characterized, aiming the application in radiation detection devices that use the scintillating properties. Two types of samples were produced in the CLA-IPEN-SP, polycrystalline samples, obtained via solid state reaction of BaF{sub 2} and YF{sub 3} under HF atmosphere, and single crystals, obtained via the zone melting method also in a HF atmosphere. The samples were characterized using the following experimental techniques: X-ray powder diffraction, Radioluminescence (RL), Optical Absorption and Dispersive X-ray Absorption Spectroscopy (DXAS). The X-ray diffraction pattern showed the presence of the phase BaY{sub 2}F{sub 8} and a small amount of the phase Ba{sub 4}Y{sub 3}F{sub 17} in the polycrystalline pure and Tb{sup 3+}doped samples. The other samples showed only the desired BaY{sub 2}F{sub 8} phase. The radioluminescence measurements of the doped BaYF, when irradiated with X-rays, showed emission peaks in energies that are characteristics of the 4f-4f transitions of rare earths. The RL of the samples with 2 mol por cent and 3 mold of Tb{sup 3+}showed quite intense peaks with a maximum emission peak at 545 nm. The Tm{sup 3+}doped BYF showed that the scintillation efficiency is not directly proportional to the doping level, and the highest RL emission were obtained for the polycrystalline samples doped with 1 mol por cent, showing a maximum peak intensity at 456 nm (the blue region of the visible spectrum). All samples showed a phosphorescent decay time of the order of seconds. Single crystals of BaYF doped with 2 mol por cent of Er{sup 3+}, in addition to one of the highest phosphorescence time, presents a quite strong Rl in the green region of the spectra. The radiation damage was evaluated by the optical absorption techniques and the results showed that the formation of the absorption bands can be connected to colors centers generated by radiation in the matrix. Measurements of DXAS, done at the LNLS DXAS beamline, revealed that there is no change in the absorption edge of the dopant during irradiation. Among ali samples, the Nd{sup 3+} ones presented the lowest scintillation efficiency with maximum emissions in the infrared region. (author)

  11. Structural and electrochemical characterization of calcium cobaltites (Ca{sub 3}Co{sub 4}O{sub 9}) obtained by the modified Pechini Method; Caracterizacao estrutural e eletroquimica de cobaltita de calcio (Ca{sub 3}Co{sub 4}O{sub 9}) obtida pelo Metodo Pechini modificado

    Energy Technology Data Exchange (ETDEWEB)

    Silva, R.M.; Aquino, F. de M.; Macedo, D. A. de, E-mail: rinaldo_mendesa@hotmail.com [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil)

    2016-07-01

    This work deals with the synthesis and characterization of calcium cobaltite (Ca{sub 3}Co{sub 4}O{sub 9}, C349), a p-type semiconductor with high Seebeck coefficient (S), high electrical conductivity and low thermal conductivity that has emerged as thermoelectric material. The synthesis method used to obtain the compound C349 uses commercial gelatin as complexing and polymerizing agent. The obtained material was characterized by X-ray diffraction with Rietveld refinement of the diffraction data. The results indicated that the modified Pechini method using gelatin allows to obtain powders of calcium cobaltite (with monoclinic structure) associated with a small content (2% by volume) of Co{sub 3}O{sub 4} with cubic structure. Impedance spectroscopy measurements in air indicated that the composite C349/Co{sub 3}O{sub 4} is a promising material for use as solid oxide fuel cell cathode.(author)

  12. Structural characterization of Sr{sub 2}NaNb{sub 5}O{sub 15} nanopowders by the Rietveld method; Caracterizacao estrutural de nanopos de Sr{sub 2}NaNb{sub 5}O{sub 15} pelo metodo de Rietveld

    Energy Technology Data Exchange (ETDEWEB)

    Lanfredi, S.; Dantas, S.A.; Lima, A.R.F., E-mail: silvania@fct.unesp.b [Universidade Estadual Paulista (LaCCeF/UNESP), Presidente Prudente, SP (Brazil). Dept. de Fisica, Quimica e Biologia. Lab. de Compositos e Ceramicas Funcionais

    2009-07-01

    Ceramic materials with tetragonal tungsten bronze (TTB) type structure present great technological interest as pyroelectric detectors and piezoelectric transductors. In this work was investigated the preparation and structural characterization of the sodium strontium niobate solid solution, with Sr{sub 2}NaNb{sub 5}O{sub 15} stoichiometry, prepared by the high energy ball milling. The optimization process of the thermal treatment time of the precursor powder for the preparation of Sr{sub 2}NaNb{sub 5}O{sub 15} nanopowders were monitored by X-ray diffraction, using the Rietveld method. The structural parameters as thermal treatment time were investigated. An increase of crystallite size coupled with a decrease of the micro strain was found, as a function of increasing of the thermal treatment time of the precursor powder. The crystallite size for the Sr{sub 2}NaNb{sub 5}O{sub 15} precursor powder, in different times of thermal treatment, showed values between 35,3 and 36,7 nm. (author)

  13. Structural and morphological characterization of TiO{sub 2}-ZrO{sub 2} powders obtained by the polymeric precursors method; Caracterizacao estrutural e morfologica de pos de TiO{sub 2}-ZrO{sub 2} obtidos pelo metodo dos precursores polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, M.A.; Gama, L.; Bispo, A.; Neiva, L.S., E-mail: m_aparecidaribeiro@yahoo.com.b [Universidade Federal de Campina Grande (DEMa/UFCG), PB (Brazil). Dept. de Engenharia de Materiais; Bernardi, M.I.B. [Universidade de Sao Paulo (IFSC/USP), Sao Carlos, SP (Brazil). Inst. de Fisica; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (DEMa/UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    This work aims to characterize the structure and morphology of TiO{sub 2}-ZrO{sub 2} powders obtained by polymeric precursor method. For this we studied the following compositions: 0.25, 0.5 and 0.75 moles of Zr and calcined at 800 deg C for one hour. The powders obtained were characterized by XRD, SEM and nitrogen adsorption (BET). The analysis of X-ray diffraction showed that the powders had a phase of TiO{sub 2} in the anatase form and a tetragonal phase of ZrO{sub 2}. The crystallite size was between 8, 13 and 11 nm respectively. The analysis of scanning electron microscopy showed the growth of ZrO{sub 2} nanoparticles and that these comprise spherical agglomerates of less than 100 nm. Particle size determined by the BET ranging 28.1-29.5 nm, showing thereby the character of nanosized powders. (author)

  14. Mechanical characterization and structural of Mg{sub 70}Zn{sub 28}Ca{sub 2} alloy for use as bioabsorbable implants; Caracterizacao mecanica e estrutural de uma liga Mg{sub 70}Zn{sub 28}Ca{sub 2} para uso como implante bioabsorvivel

    Energy Technology Data Exchange (ETDEWEB)

    Asato, G.H.; Matias, T.B.; Kiminami, C.S.; Botta, W.J.; Bolfarini, C., E-mail: asato.hitoshi@gmail.com [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil)

    2014-07-01

    A ternary magnesium-based alloy was studied for your biocompatibility, high mechanical properties, elastic modulus close to the bone and corrosion rate less than pure magnesium. The experimental conditions enabled to process a Mg70Zn28Ca2 ternary amorphous alloy by the fusion of eutectic binary alloys (Mg-Zn and Mg-Ca), which were obtained from pure elements in a induction furnace in an argon atmosphere. The characterization of alloy involved quantitative chemical analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The results indicated that the actual composition was very close to the nominal, with the presence of amorphous up to 1.3 mm thick. The mechanical compression test was performed in the conventional cylindrical samples with a diameter of 3 mm on an Instron type machine, obtaining the compressive strength above 400 MPa. (author)

  15. Chemical recycling of post-consumer PET: structural characterization of terephthalic acid and the effect of Alkaline Hydrolysis at low temperature; Reciclagem quimica do PET pos-consumo: caracterizacao estrutural do acido tereftalico e efeito da hidrolise alcalina em baixa temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Fonseca, Talitha Granja; Almeida, Yeda Medeiros Bastos de; Vinhas, Gloria Maria, E-mail: gmvinhas@yahoo.com.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Engenharia Quimica

    2014-09-15

    Due to the environmental impact caused by PET packaging disposal, this material recycling has been thoroughly discussed and evaluated. In particular, chemical recycling enables achievement of the monomers that are used in PET resin manufacture: ethylene glycol (EG) and terephthalic acid (PTA). Therefore, studies for this process optimization are important from environmental and economic points of view. The present study investigated certain parameters that influence the depolymerization reaction of PET post-consumer via alkaline hydrolysis in order to obtain PTA. Assays were performed at 70 °C by varying the concentration of sodium hydroxide and the reaction time. The best results were obtained at 10.82 mol L{sup -1} NaOH and 9 h reaction time. Consequently, it was possible to prove this process viability, once analyses by infrared and nuclear magnetic resonance confirmed that PTA was obtained in all reactions performed. (author)

  16. Uma propriedade estrutural do problema de programação da produção flow shop permutacional com tempos de setup

    Directory of Open Access Journals (Sweden)

    João Vitor Moccellin

    2007-01-01

    Full Text Available Neste artigo apresenta-se uma propriedade estrutural do problema de programação da produção flow shop permutacional com tempos de setup das máquinas separados dos tempos de processamento das tarefas, a qual foi identificada a partir de investigações que foram realizadas sobre as características do problema. Tal propriedade fornece um limitante superior do tempo de máquina parada entre a sua preparação e o início de execução das tarefas. Utilizando a propriedade, o problema original de programação da produção com minimização do makespan pode ser resolvido de maneira heurística por meio de uma analogia com o problema assimétrico do caixeiro-viajante.This paper deals with the permutation flow shop scheduling problem with separated machine setup times. As a result of an investigation on the problem characteristics a structural property is introduced. Such a property provides an upper bound on the idle time of the machines between the setup task and the job processing. As an application of this property, the original scheduling problem with the makespan criterion can be heuristically solved by an analogy with the asymmetric traveling salesman problem.

  17. Wood Properties and Kinds; A Base Syllabus on Wood Technology.

    Science.gov (United States)

    Eastern Kentucky Univ., Richmond.

    Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and content of their programs. This booklet is concerned largely with the physical composition and…

  18. Composite structure of wood cells in petrified wood

    Energy Technology Data Exchange (ETDEWEB)

    Nowak, Jakub [Department of Chemistry, Catholic University of Lublin, 20-718 Lublin (Poland); Florek, Marek [Department of Chemistry, Catholic University of Lublin, 20-718 Lublin (Poland); Kwiatek, Wojciech [Institute of Nuclear Physics, Department of Nuclear Spectroscopy, 31-342 Cracow (Poland); Lekki, Janusz [Institute of Nuclear Physics, Department of Nuclear Spectroscopy, 31-342 Cracow (Poland); Chevallier, Pierre [LPS, CEN Saclay et LURE, Universite Paris-Sud, Bat 209D, F-91405 Orsay (France); Zieba, Emil [Department of Chemistry, Catholic University of Lublin, 20-718 Lublin (Poland); Mestres, Narcis [Institut de Ciencia de Materials de Barcelona (ICMAB), Campus de la UAB, E-08193-Bellaterra (Spain); Dutkiewicz, E.M. [Institute of Nuclear Physics, Department of Nuclear Spectroscopy, 31-342 Cracow (Poland); Kuczumow, Andrzej [Department of Chemistry, Catholic University of Lublin, 20-718 Lublin (Poland)

    2005-04-28

    Special kinds of petrified wood of complex structure were investigated. All the samples were composed of at least two different inorganic substances. The original cell structure was preserved in each case. The remnants of the original biological material were detected in some locations, especially in the cell walls. The complex inorganic structure was superimposed on the remnant organic network. The first inorganic component was located in the lumena (l.) of the cells while another one in the walls (w.) of the cells. The investigated arrangements were as follows: calcite (l.)-goethite-hematite (w.)-wood from Dunarobba, Italy; pyrite (l.)-calcite (w.)-wood from Lukow, Poland; goethite (l.)-silica (w.)-wood from Kwaczala, Poland. The inorganic composition was analysed and spatially located by the use of three spectral methods: electron microprobe, X-ray synchrotron-based microprobe, {mu}-PIXE microprobe. The accurate mappings presenting 2D distribution of the chemical species were presented for each case. Trace elements were detected and correlated with the distribution of the main elements. In addition, the identification of phases was done by the use of {mu}-Raman and {mu}-XRD techniques for selected and representative points. The possible mechanisms of the described arrangements are considered. The potential synthesis of similar structures and their possible applications are suggested.

  19. Wood properties affecting finish service life

    Science.gov (United States)

    R. Sam. Williams; Charles. Jourdain; George I. Daisey; Robert W. Springate

    2000-01-01

    Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth conditions, size of the tree at harvest, sawing, and other manufacturing processes. Some of the more important wood properties as they relate to wood finishing are discussed, e.g., growth rate, density, knots, extractives, juvenile...

  20. Sustainable wood waste management in Nigeria

    Directory of Open Access Journals (Sweden)

    Owoyemi Jacob Mayowa

    2016-09-01

    Full Text Available Wood industries produce large volumes of residues which must be utilized, marketed or properly disposed of. Heaps of wood residues are common features in wood industries throughout the year. In Nigeria, this residue is generally regarded as waste and this has led to open burning practices, dumping in water bodies or dumping in an open area which constitutes environmental pollution. Sawmills in Nigeria generated over 1,000,000 m3 of wood waste in 2010 while about 5000 m3 of waste was generated in plywood mills. Nigeria generates about 1.8 million tons of sawdust annually and 5.2 million tons of wood wastes. The impact of improper disposal of waste wood on the environment affects both the aquatic and terrestrial ecosystems. Also burning of waste wood releases greenhouse gases into the atmosphere causing various health issues. Reuse/recycling of these wood residues in Nigeria will reduce the pressure on our ever decreasing forests, reduce environmental pollution, create wealth and employment. The literature available on this subject was reviewed and this article, therefore, focuses on the various methods of wood waste disposal and its utilization in Nigerian wood industries, the effects of wood waste on the environment as well as on human health and the benefits of proper wood waste management practices.

  1. Using a wood stove to heat greenhouses

    Science.gov (United States)

    Gloria Whitefeather-Spears

    2009-01-01

    The Red Lake Tribal Forestry Greenhouse in Red Lake, MN, utilizes four types of outdoor furnaces for heating through the fall, winter, and spring. The WoodMaster® is a highly efficient, wood-fired furnace that provides forced-air heat to the greenhouse. The HeatmorTM furnace is an economical wood-fired alternative that can provide lower...

  2. Effects of phosphoramides on wood dimensional stability

    Science.gov (United States)

    Hong-Lin. Lee; George C. Chen; Roger M. Rowell

    2000-01-01

    To evaluate the dimensional stability of phosphoramide-reacted wood, wood was reacted with a mixture which was derived from compounding phosphorus pentoxide and each of 12 amines including alkyl, halophenyl, and phenyl amines in N,N-dimethylformamide. Dimensional stability of such reacted wood was analyzed by antishrink efficiency (ASE) using the water-soak method....

  3. Use of wood in buildings and bridges

    Science.gov (United States)

    Russell C. Moody; Anton TenWolde

    1999-01-01

    In North America, most housing and commercial structures built prior to the 20th century used wood as the major structural material. The abundant wood resource formed the basic structure for most houses, commercial buildings, bridges, and utility poles. Today, houses and many light commercial and industrial buildings are made using modern wood structural materials....

  4. Balsa wood as an energy dissipator

    Science.gov (United States)

    Knoell, A. C.

    1973-01-01

    Studies have been undertaken to determine response of balsa wood in variety of environmental conditions. Response is dependent upon state of balsa wood as well as environment to which it is exposed, but certain combinations of conditions serve to increase significantly energy-dissipating capacity of wood relative to its normal capacity.

  5. Build Green: Wood Can Last for Centuries

    Science.gov (United States)

    Carol A. Clausen; Samuel V. Glass

    2012-01-01

    This report updates and revises information from the 1976 Forest Service publication by Rodney C. DeGroot, “Your Wood Can Last for Centuries.” It explains why wood decays, alerts the homeowner to conditions that can result in decay in buildings, and describes measures to prevent moisture-related damage to wood.

  6. Bioremediation of treated wood with fungi

    Science.gov (United States)

    Barbara L. Illman; Vina W. Yang

    2006-01-01

    The authors have developed technologies for fungal bioremediation of waste wood treated with oilborne or metal-based preservatives. The technologies are based on specially formulated inoculum of wood-decay fungi, obtained through strain selection to obtain preservative-tolerant fungi. This waste management approach provides a product with reduced wood volume and the...

  7. Effects of Acid Deposition on Wood

    Science.gov (United States)

    Mark Knaebe

    2013-01-01

    Since acid deposition increases the rate of deterioration of unpainted wood, it can also affect the performance of paint applied to this weathered wood. In tests conducted near Madison, Wisconsin, smooth-planed wood was allowed to weather before painting. Exposure for as little as 2 weeks shortened the service life of the subsequently applied paint. The paint bond was...

  8. Cone calorimeter tests of wood composites

    Science.gov (United States)

    Robert H. White; Kuma Sumathipala

    2013-01-01

    The cone calorimeter is widely used for the determination of the heat release rate (HRR) of building products and other materials. As part of an effort to increase the availability of cone calorimeter data on wood products, the U.S. Forest Products Laboratory and the American Wood Council conducted this study on composite wood products in cooperation with the Composite...

  9. Wood structure and adhesive bond strength

    Science.gov (United States)

    Charles R. Frihart

    2006-01-01

    Much of the literature on the bonding of wood and other lignocellulosic materials has concentrated on traditional adhesion theories. This has led to misconceptions because wood is a porous material on both the macroscopic and microscopic levels. A better understanding of wood bonding can be developed by investigating the theories of adhesion and bond strength, taking...

  10. Reusing remediated CCA-treated wood

    Science.gov (United States)

    Carol A. Clausen

    2003-01-01

    Options for recycling and reusing chromated-copper-arsenate- (CCA) treated material include dimensional lumber and round wood size reduction, composites, and remediation. Size reduction by remilling, shaving, or resawing CCA-treated wood reduces the volume of landfilled waste material and provides many options for reusing used treated wood. Manufacturing composite...

  11. Mechanical Behaviour of the Wood Masonry

    Directory of Open Access Journals (Sweden)

    Fazia FOUCHAL

    2011-09-01

    Full Text Available In this paper we study the walls wood masonry behaviour. First, we propose a regulatory validation of the walls wood masonry behaviour subjected to vertical and horizontal loads according to Eurocode 5. Then we present the numerical application on the wall wood supported two floors level.

  12. Wood decomposing abilities of diverse lignicolous fungi on nondecayed and decayed beech wood.

    Science.gov (United States)

    Fukasawa, Yu; Osono, Takashi; Takeda, Hiroshi

    2011-01-01

    We tested the decay abilities of 28 isolates from 28 lignicolous fungal species (Basidiomycota, Ascomycota and Zygomycota) with the pure culture test. We used beech wood powder in varying moisture conditions and decay stages (nondecayed, intermediately decayed and well decayed) as substrates. The weight loss in wood powder was -0.2-17.8%. Five isolates of Basidiomycota (Bjerkandera adusta, Mycena haematopus, Omphalotus guepiniformis, Trametes hirsuta, Trametes versicolor) caused high weight losses in nondecayed wood. We detected significant effects of decay stage on weight loss in wood in most isolates tested, whereas moisture content rarely had an effect on weight loss. Among Basidiomycota and Xylariaceae in Ascomycota weight loss was greater for nondecayed wood than for intermediately and well decayed wood. In contrast four isolates in Ascomycota (Scytalidium lignicola, Trichoderma hamatum, T. harzianum, T. koningii) caused substantial weight loss in intermediately and well decayed wood, although they rarely caused weight loss in nondecayed wood. Zygomycota caused low weight loss in wood. Wood decay stages also affected decomposition of wood chemical components. Acid-unhydrolyzable residue (AUR) decomposition was reduced, whereas holocellulose decomposition was stimulated by some strains of Basidiomycota and Ascomycota in well decayed wood. T. harzianum in particular caused significant weight loss of holocellulose in well decayed wood, although this fungus caused negligible weight loss of both AUR and holocellulose in nondecayed wood. We discuss these changes in the decay patterns of AUR and holocellulose with varying wood decay stages in relation to the role of fungal decomposition of woody debris in forests.

  13. Body of Wood

    Directory of Open Access Journals (Sweden)

    Pierre Michon

    2014-12-01

    not only a defrocked friar with the guys or on the street; he donned the silk babouches when he went home too. He dispossessed himself of the Seine that rolled on before his eyes; the small girl who lived on her feet, whom he puts to death in all his books, he hardly saw her; the loveliest girls of his day, the finest too for sure, who wanted him, so that he happened to come – he dispossessed himself of them, whether he came or opted to come no more, which amounted to the same thing; no apples from Norman orchards, no trees deep in the woods, no unlaced Louise Colet, no lilies, no young laughter, no Louise Colet weeping at his door, he kissed it all off, laughed over it and kissed it off, cried about it and kissed it off, he was not there. In fact he had nothing, he was deprived of everything, since it was in his head.

  14. China: changing wood products markets

    Science.gov (United States)

    Daowei Zhang; Junchang Liu; James Granskog; Jianbang Gan

    1998-01-01

    In the 1980's, China emerged as the world's second largest importer of forest products and the second largest importer of U.S. forest products. However, U.S. wood products exports to China declined nearly 93 percent from 1988 to 1996, from >/=448 million to >/=33 million. Little is known about the reasons that caused this decline. Less is probably known...

  15. Microwave drying of wood strands

    Science.gov (United States)

    Guanben Du; Siqun Wang; Zhiyong Cai

    2005-01-01

    Characteristics of microwave drying of wood strands with different initial moisture contents and geometries were investigated using a commercial small microwave oven under different power inputs. Temperature and moisture changes along with the drying efficiency were examined at different drying scenarios. Extractives were analyzed using gas chromatography=mass...

  16. Adhesive bonding of wood materials

    Science.gov (United States)

    Charles B. Vick

    1999-01-01

    Adhesive bonding of wood components has played an essential role in the development and growth of the forest products industry and has been a key factor in the efficient utilization of our timber resource. The largest use of adhesives is in the construction industry. By far, the largest amounts of adhesives are used to manufacture building materials, such as plywood,...

  17. Wood anatomy of the Combretaceae

    NARCIS (Netherlands)

    Vliet, van G.J.C.M.

    1979-01-01

    The wood anatomy of all genera of the Combretaceae (Meiostemon excepted) is described in detail on the basis of 120 samples representing 90 species from 19 genera. Additional data from the literature are added. The structural variation of the vestured pits is described and classified. There are two

  18. Wood quality of white willow

    Directory of Open Access Journals (Sweden)

    André Leclercq

    1997-01-01

    Full Text Available Based upon an exhaustive work made by Sacré (1974 and a review of the literature sine 1960, the author gathered together the anatomical, physical and mechanical characteristics, the machining behaviour (industrial sawing, planing, surfacing, shaping, mortising and nailing and wood end-uses of white willow.

  19. Biosynthesis and biodegradation of wood components

    Energy Technology Data Exchange (ETDEWEB)

    Higuchi, T. (ed.)

    1985-01-01

    A textbook containing 22 chapters by various authors covers the structure of wood, the localization of polysaccharides and lignins in wood cell walls, metabolism and synthetic function of cambial tissue, cell organelles and their function in the biosynthesis of cell wall components, biosynthesis of plant cell wall polysaccharides, lignin, cutin, suberin and associated waxes, phenolic acids and monolignols, quinones, flavonoids, tannins, stilbenes and terpenoid wood extractives, the occurrence of extractives, the metabolism of phenolic acids, wood degradation by micro-organisms and fungi, and biodegradation of cellulose, hemicelluloses, lignin, and aromatic extractives of wood. An index is included.

  20. Kinetic investigation of wood pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Thurner, F.; Mann, U.; Beck, S. R.

    1980-06-01

    The objective of this investigation was to determine the kinetics of the primary reactions of wood pyrolysis. A new experimental method was developed which enabled us to measure the rate of gas, tar, and char production while taking into account the temperature variations during the wood heating up. The experimental method developed did not require any sophisticated instruments. It facilitated the collection of gas, tar and residue (unreacted wood and char) as well as accurate measurement of the temperature inside the wood sample. Expressions relating the kinetic parameters to the measured variables were derived. The pyrolysis kinetics was investigated in the range of 300 to 400/sup 0/C at atmospheric pressure and under nitrogen atmosphere. Reaction temperature and mass fractions of gas, tar, and residue were measured as a function of time. Assuming first-order reactions, the kinetic parameters were determined using differential method. The measured activation energies of wood pyrolysis to gas, tar, and char were 88.6, 112.7, and 106.5 kJ/mole, respectively. These kinetic data were then used to predict the yield of the various pyrolysis products. It was found that the best prediction was obtained when an integral-mean temperature obtained from the temperature-time curve was used as reaction temperature. The pyrolysis products were analyzed to investigate the influence of the pyrolysis conditions on the composition. The gas consisted mainly of carbon dioxide, carbon monoxide, oxygen, and C/sub 3//sup +/-compounds. The gas composition depended on reaction time as well as reactor temperature. The tar analysis indicated that the tar consisted of about seven compounds. Its major compound was believed to be levoglucosan. Elemental analysis for the char showed that the carbon content increased with increasing temperature.

  1. THE EFFECTS OF WOOD RAW MATERIAL PRODUCTION ACTIVITIES ON WOOD QUALITY CLASSES

    Directory of Open Access Journals (Sweden)

    Saliha Ünver

    2005-04-01

    Full Text Available Wood raw material production without barked round is 3.5 billion m3 in the world. According to their amounts, industrial wood products set out log, fiber chip and pulp wood respectively in. Wood raw material produced in Turkey is not enough for market demand, so 9% of industrial wood demand has been imported. For this reason, the quality loses are as important as the quantity loses, which can be occurred during wood raw material production. Both preserving of continuity of forest sources and saving of addition to country economy are important during wood raw material production. To reduce the quality losses on the wood raw material is possible with the usage of developed techniques, taking into consideration sector demand, storing of wood raw material by suitable conditions and being worked the experienced worker.

  2. Influence of wood structure on wood properties of tropical species

    OpenAIRE

    Baar, Jan

    2014-01-01

    The presented thesis is focused on aesthetical and acoustic properties of tropical wood. The discussed tropical species are utilized in Europe mainly for their unusual appearance and colour in joinery and furniture production. The irreplacable acoustic properties like low internal friction predestine specific species for production of musical instruments. The colour of six selected tropical species - jatoba (Hymenea courbaril L.), massaranduba (Manilkara bidentata A. Chev.), muiracatiara (Ast...

  3. Aplicação da alvenaria estrutural em sistemas de armazenamento de produtos agrícolas a granel Applying structural masonry for granular material storage systems

    Directory of Open Access Journals (Sweden)

    José F. de A Marques Neto

    2011-02-01

    Full Text Available O armazenamento de produtos agrícolas cumpre um papel importante no agronegócio. Observa-se uma tendência cada vez maior em se trabalhar com produtos a granel, em grandes volumes. Visando a uma concepção construtiva racional e econômica, o presente trabalho propõe um sistema misto em concreto armado e alvenaria estrutural aplicado a silos para armazenagem de produto agrícola a granel. No projeto proposto, o silo é composto de células em alvenaria estrutural, geminadas duas a duas na largura e com um número variável de células no comprimento, em função do volume desejado de armazenagem. Esse sistema simétrico favorece a racionalidade operacional, garantindo a continuidade entre os fluxos de recebimento e de expedição. O fundo da célula é em forma de tremonha dupla troncopiramidal, com saída central, construída em painéis treliçados pré-moldados. A sustentação das células e das tremonhas é feita através de vigas e de pilares de concreto armado. O isolamento térmico necessário para que a qualidade do produto armazenado seja garantida é estabelecido pela utilização de telhas trapezoidais de aço galvanizado, tanto na cobertura como nos fechamentos laterais. A fim de ilustrar o presente trabalho, um exemplo de silo utilizando o sistema proposto é apresentado, e a viabilidade da concepção construtiva adotada é analisada.The storage of granular materials has had an important role in the agribusiness. Storing granular materials in silos, instead of in bags or big-bags, has been an increase tendency. Aiming at an economic and rational solution for storing granular materials this paper presents an alternative design: a multi-cell silo group composed of reinforced masonry rectangular cells coupled two by two in width, and a variable number of cells in length according to the volume of desired storage. Such symmetrical system benefits the loading and the unloading operations, and guarantees the continuity between the

  4. Generalização estrutural a partir do tratamento por diferentes modelos de oposições Structural generalization after treatment based on different oppositions approaches

    Directory of Open Access Journals (Sweden)

    Karina Carlesso Pagliarin

    2011-09-01

    Full Text Available Este trabalho teve como objetivo analisar a generalização estrutural (a itens não utilizados no tratamento, para outras posições na palavra, dentro de uma classe de sons e para outras classes de sons em três diferentes modelos de abordagem contrastiva, considerando-se a gravidade do desvio fonológico. A amostra constituiu-se de nove sujeitos com desvio fonológico, com idades entre 4 anos e 2 meses e 6 anos e 6 meses. Todos foram avaliados, antes e após a terapia fonológica. Foram estabelecidos três grupos para o tratamento, todos constituídos por três sujeitos; em cada um havia um representante com desvio grave, moderado-grave e médio-moderado. Cada grupo foi tratado por um modelo diferente - Oposições Mínimas, Oposições Máximas/Empty Set e Oposições Múltiplas. A análise estatística dos resultados foi feita mediante comparação entre os modelos terapêuticos e a gravidade do desvio fonológico, utilizando-se os tipos de generalização. Verificou-se a ocorrência dos diferentes tipos de generalização em todos os grupos estudados, entretanto não houve diferença entre eles. Os três modelos de terapia aplicados favoreceram a ocorrência de generalização estrutural nas três diferentes gravidades do desvio, demonstrando que os modelos de abordagem contrastiva são eficazes no tratamento do desvio fonológico.This study had the aim to analyze structural generalization (to untreated words, to other word positions, across and within sound classes in three different models of contrastive approach, based on the severity of phonological disorder. The sample comprised nine subjects with phonological disorders with ages between 4 years and 2 months and 6 years and 6 months. All subjects were assessed before and after phonological therapy. Three groups with three subjects each were established for treatment; each group had one subject with severe, moderate-severe and mild-moderate disorder, and each was treated by a different

  5. Análise florística e estrutural de sistemas silviagrícolas em Tomé-Açu, Pará

    Directory of Open Access Journals (Sweden)

    Édson Luis Bolfe

    2011-10-01

    Full Text Available O objetivo deste trabalho foi analisar a composição florística e estrutural de sistemas silviagrícolas em Tomé-Açu, Pará. Os dados dendrométricos foram obtidos por inventário em 40 parcelas amostrais, com três unidades cada uma, no total de 120 unidades de 10x10 m. Foi inventariada a média de 1.424,3 indivíduos por hectare, pertencentes a 27 famílias e a 54 espécies. Tendo-se considerado a variabilidade dos estágios vegetativos, os diferentes sistemas silviagrícolas (SAF foram divididos em quatro classes hierárquicas: SAF 1, SAF 2, SAF 3, e SAF 4, para estabelecer um sistema de classificação passível de ser utilizado em outras avaliações de campo e em classificações digitais por meio do sensoriamento remoto. Espécies observadas em outros sistemas da região amazônica também foram relevantes para este estudo, especialmente Theobroma cacao, T. grandiflorum e Euterpe oleracea que, juntas, apresentaram médias de frequência relativa de 51%, densidade relativa de 69,2%, dominância relativa de 50,1% e índice de valor de importância de 56,8%. Os dados médios de diversidade florística, abundância, área basal e valor de importância indicam os sistemas silviagrícolas da região de Tomé-Açu como sistemas de produção com potencial econômico e ambiental, se adotado manejo adequado e racional.

  6. Fractografia de compósito estrutural aeronáutico submetido ao ensaio de tenacidade à fratura interlaminar em Modo II

    Directory of Open Access Journals (Sweden)

    Geraldo Maurício Cândido

    2014-01-01

    Full Text Available A fractografia consiste no estudo detalhado da morfologia da superfície de fratura de materiais. Para isto, a técnica de microscopia eletrônica de varredura (MEV é usualmente utilizada para determinar a causa de falha e a relação do modo de falha com a microestrutura do material em análise. Essas informações permitem estabelecer analogia entre estrutura, propriedade e processamento do material com a iniciação e a propagação da falha. Neste estudo, a análise fractográfica é utilizada para investigar os aspectos que caracterizaram a falha por delaminação em Modo II de laminados poliméricos de uso estrutural. Para isto, espécimes com um inserto de Teflon® introduzido no plano médio de uma das extremidades do laminado (End-Notched foram submetidos ao ensaio de carregamento em flexão em quatro pontos. Os espécimes foram preparados a partir de um laminado fabricado em autoclave, com camadas (0º, 90º de material pré-impregnado de tecido bidirecional em estilo plain weave de fibras de carbono IM7/resina epóxi M21. Os resultados da análise mostram que a superfície de fratura é muito irregular, com a visualização de fibras e impressões de fibras na matriz. Aspectos fractográficos de cúspides e formatos de concha, originados durante o cisalhamento da matriz polimérica, são também observados.

  7. Impactos da mudança estrutural da economia brasileira sobre o seu crescimento Structural change in Brazilian economy and its effects upon economic growth

    Directory of Open Access Journals (Sweden)

    Luciano Nakabashi

    2010-08-01

    Full Text Available Na abordagem estruturalista, o papel da indústria tem destaque na dinâmica da economia devido a fatores inerentes a esse setor. Dentre os autores clássicos que se destacam nesse campo, podemos ressaltar as contribuições de Raúl Prebisch, Celso Furtado, Albert Hirschman e Nicholas Kaldor, os quais, ao longo de suas respectivas obras, apresentaram valiosas interpretações sobre a dinâmica do desenvolvimento econômico e enfatizaram a importância do papel da indústria de transformação nesse processo. Com base nos argumentos iniciais desses autores, o presente estudo busca analisar os efeitos da mudança estrutural da economia brasileira sobre o seu desempenho, com ênfase no setor industrial, para o período 1948-2007.In the structuralist approach, the industry sector has an outstanding function in the dynamics of an economy due to the fact several features are intrinsic to this economic sector. Among other important authors in this field, Raúl Prebisch, Celso Furtado, Albert Hirschman, and Nicholas Kaldor have given significant contributions to the understanding of this complex issue. These authors have studied extensively the relationship between economic development dynamics and structural change, placing emphasis on the role played by the industrial sector in this process. Based on the initial arguments of the above cited authors, the present paper aims at investigating the effects of the Brazilian economy structural change on its performance, highlighting the industrial sector role in the period 1948-2007.

  8. WOOD BIOMASS FOR ENERGY IN MONTENEGRO

    Directory of Open Access Journals (Sweden)

    Gradimir Danon

    2010-01-01

    Full Text Available Wood biomass has got its place in the energy balance of Montenegro. A little more than 6% of the total energy consumption is obtained by burning wood. Along with the appropriate state measures, it is economically and environmentally justified to expect Montenegro to more than double the utilization of the existing renewable energy sources including wood biomass, in the near future. For the purpose of achieving this goal, ‘Commercial Utilisation of the Wood Residue as a Resource for Economic Development in the North of Montenegro' project was carried out in 2007. The results of this project were included in the plan of the necessary interventions of the Government and its Agencies, associations or clusters, non-government organisations and interested enterprises. The plan was made on the basis of the wood residue at disposal and the attitude of individual subjects to produce and/or use solid bio-fuels and consists of a proposal of collection and utilisation of the wood residue for each individual district in the north of Montenegro. The basic factors of sustainability of future commercialisation of the wood residue were: availability of the wood raw material, and thereby the wood residue; the development of wood-based fuel markets, and the size of the profit.

  9. Serpula lacrymans, Wood and Buildings.

    Science.gov (United States)

    Watkinson, S C; Eastwood, D C

    2012-01-01

    Serpula lacrymans, the causative agent of dry rot timber decay in buildings, is a Basidiomycete fungus in the Boletales clade. It owes its destructiveness to a uniquely well-developed capacity to colonize by rapid mycelial spread from sites of initial spore infection, coupled with aggressive degradation of wood cellulose. Genomic methods have recently elucidated the evolution and enzymic repertoire of the fungus, suggesting that it has a distinctive mode of brown rot wood decay. Using novel methods to image nutrient translocation, its mycelium has been modeled as a highly responsive resource-supply network. Dry rot is preventable by keeping timber dry. However, in established outbreaks, further mycelial spread can be arrested by inhibitors of translocation. Copyright © 2012 Elsevier Inc. All rights reserved.

  10. Carbon Sequestration via Wood Burial

    Science.gov (United States)

    Zeng, N.

    2007-12-01

    To mitigate global climate change, a portfolio of strategies will be needed to keep the atmospheric CO2 concentration below a dangerous level. Here a carbon sequestration strategy is proposed in which forest dead wood or old trees are harvested via collection or selective cutting, then buried in trenches or stowed away in above-ground shelters. The largely anaerobic condition under a sufficiently thick layer of soil will prevent the decomposition of the buried wood. Because a large flux of CO2 is constantly being assimilated into the world's forests via photosynthesis, cutting off its return pathway to the atmosphere forms an effective carbon sink. It was estimated that the carbon sequestration potential of forest wood harvest and burial is 10GtC y-1 with an uncertainty range of 5-15 GtC y-1. Based on data from North American logging industry, the cost was crudely estimated at $50/tC, significantly lower than the cost for power plant CO2 capture with geological storage, a carbon sequestration technique currently under most serious consideration. The low cost is largely because the CO2 capture is achieved at little cost by the natural process of photosynthesis. The technique is low tech, distributed, safe and can be stopped or reversed at any time. The relatively low cost may soon be competitive enough for large-scale implementation in a world-wide carbon trading market. In tropical regions with ongoing deforestation, wood burial instead of burning will immediately reduce that portion of the anthropogenic CO2 emission.

  11. Chapter 02: Basic wood biology—Anatomy for identification

    Science.gov (United States)

    Alex Wiedenhoeft

    2011-01-01

    Before the topics of using a hand lens, preparing wood for observation, and understanding the characters used in wood identification can be tackled, a general introduction to the biology of wood must be undertaken. The woods in commercial trade in Central America come almost exclusively from trees, so the discussion of wood biology is restricted to trees here, though...

  12. Status of Wood Processing and Storage in Nigeria | Ohagwu ...

    African Journals Online (AJOL)

    The work showcases wood processing and storage operations in Nigeria. The importance of wood as a multipurpose biomaterial were discussed as well as its nature, characteristics, lumbering pattern and other product derived from wood. The available wood/timber in Nigeria as well as the unit operations in wood ...

  13. Nigerian Wood Waste: A Potential Resource for Economic ...

    African Journals Online (AJOL)

    This paper therefore aims to highlight the potentials of wood waste as a viable resource for economic growth and sustainable development and thereby pique the people's interest in the proper management and harnessing of wood waste. Keywords: Sustainable development, Wood waste, Wood waste management, Wood ...

  14. Carbon sequestration via wood burial

    Directory of Open Access Journals (Sweden)

    Zeng Ning

    2008-01-01

    Full Text Available Abstract To mitigate global climate change, a portfolio of strategies will be needed to keep the atmospheric CO2 concentration below a dangerous level. Here a carbon sequestration strategy is proposed in which certain dead or live trees are harvested via collection or selective cutting, then buried in trenches or stowed away in above-ground shelters. The largely anaerobic condition under a sufficiently thick layer of soil will prevent the decomposition of the buried wood. Because a large flux of CO2 is constantly being assimilated into the world's forests via photosynthesis, cutting off its return pathway to the atmosphere forms an effective carbon sink. It is estimated that a sustainable long-term carbon sequestration potential for wood burial is 10 ± 5 GtC y-1, and currently about 65 GtC is on the world's forest floors in the form of coarse woody debris suitable for burial. The potential is largest in tropical forests (4.2 GtC y-1, followed by temperate (3.7 GtC y-1 and boreal forests (2.1 GtC y-1. Burying wood has other benefits including minimizing CO2 source from deforestation, extending the lifetime of reforestation carbon sink, and reducing fire danger. There are possible environmental impacts such as nutrient lock-up which nevertheless appears manageable, but other concerns and factors will likely set a limit so that only part of the full potential can be realized. Based on data from North American logging industry, the cost for wood burial is estimated to be $14/tCO2($50/tC, lower than the typical cost for power plant CO2 capture with geological storage. The cost for carbon sequestration with wood burial is low because CO2 is removed from the atmosphere by the natural process of photosynthesis at little cost. The technique is low tech, distributed, easy to monitor, safe, and reversible, thus an attractive option for large-scale implementation in a world-wide carbon market.

  15. EVOLUTION OF LIGHTWEIGHT WOOD COMPOSITES

    Directory of Open Access Journals (Sweden)

    Marius C. BARBU

    2016-01-01

    Full Text Available Lightweight boards and beams in the wood-based construction and furniture industry are not a new topic. The density reduction of panels using sandwich structure with light cores was confirmed by users like doors or mobile homes more than three decades ago. Today many ways to attain a lighter wooden structure are on offer, partially in industrial application. The first one is the use of light-weight wood species like balsa, lime, pine from southern hemisphere plantations etc. limited by the availability, strength properties, gluability and so on. A second one is the sandwich structure made from hard faces like thick veneer, thin plywood, particleboard or high density thin fiberboard and cores made from honeycomb paper, very light wood species or foams like the polystyrene one. A third way to produce a light structure is to reduce the core drastically, using predesigned skeletons with special shapes and connections to the faces. The engines for these developments are on the one hand the fast growing market of knockdown furniture and on the other hand the increasing costs for energy and raw materials. Additional factors that make weight saving a primary economical objective for most producers are transportation costs, easier handling and higher acceptance among the end users. Moreover, customers demand more for ergonomical solutions regarding packaging. Many patents were generated by researchers and developers for new one-stage production processes for sandwich panels with wood- and impregnated paper-based facings made from veneers, particles or fibres and a core consisting of expandable foams, particles or embedded hard skeletons. These ideas or prototypes could be integrated in existing continuous pressing lines for wood based panels keeping some of the advantages of the continuous production technique in matters of efficiency. Some of the challenges of the light weight wooden structure are the connection in half or final parts, resistance to

  16. Designated fiber stress for wood poles

    Science.gov (United States)

    Ronald W. Wolfe; Robert O. Kluge

    2005-01-01

    Wood poles have been used to support utility distribution lines for well over 100 years. Over that time, specifications for a “wood utility pole” have evolved from the closest available tree stem more than 15 ft in length to straight, durable timbers of lengths ranging up 125 ft and base diameters of as much as 27 in. The continued success of wood poles in this...

  17. Forest biomass and wood waste resources

    Science.gov (United States)

    K. Skog; P. Lebow; D.. Dykstra; P.. Miles; B.J. Stokes; R.D. Perlack; M. Buford; J. Barbour; D. McKeever

    2011-01-01

    This chapter provides estimates of forest biomass and wood waste quantities, as well as roadside costs (i.e., supply curves) for each county in the contiguous United States. Roadside price is the price a buyer pays for wood chips at a roadside in the forest, at a processing mill location in the case of mill residue, or at a landfill for urban wood wastes prior to any...

  18. Physicochemical patterns of ozone absorption by wood

    Science.gov (United States)

    Mamleeva, N. A.; Lunin, V. V.

    2016-11-01

    Results from studying aspen and pine wood ozonation are presented. The effect the concentration of ozone, the reagent residence time, and the content of water in a sample of wood has on ozone consumption rate and ozone demand are analyzed. The residence time is shown to determine the degree of ozone conversion degree and the depth of substrate destruction. The main patterns of ozone absorption by wood with different moisture content are found. Ways of optimizing the ozonation of plant biomass are outlined.

  19. Wood Energy Potential in Northwestern South Carolina

    Science.gov (United States)

    James W. McMinn

    1986-01-01

    The quantity of unused wood in an Ill-county area in northwestern South Carolina was projected to be more than 16 million tons annually. Wood that is unsuitable for products other than fuel amounts to nearly 9 million tons annually.The most likely energy demand by industrial plants that are good candidates for wood fuel systems is 1.5 million tons annually.Maximum...

  20. Violates stem wood burning sustainable development?

    DEFF Research Database (Denmark)

    Czeskleba-Dupont, Rolf

    2008-01-01

    friendly effects of substituting wood burning for fossil fuels. With reference to Bent Sørensen's classical work on 'Renewable Energy' the assumption of CO2-neutrality regarding incineration is problematised when applied to plants with long rotation periods as trees. Registered CO2-emissions from wood...... burning are characterised together with particle and PAH emissions. The positive treatment of wood stove-technology in the Danish strategy for sustainable development (draft 2007) is critically evaluated and approaches to better regulation are identified....

  1. Wood-rotting fungi of North America

    Energy Technology Data Exchange (ETDEWEB)

    Gilbertson, R.L.

    1980-01-01

    The biology of wood-rotting fungi is reviewed. Discussions are presented in taxonomy, species diversity, North American distribution, developmental response to environmental factors, edibility and toxicity, medical uses, relationships of fungi with insects and birds, the role of fungi as mycorrhiza, pathological relationships with trees, role in wood decay, and ecology. Threats to the continuing existence of these fungi as a result of increased utilization of wood as fuel are also discussed. (ACR)

  2. Durable wood bonding with epoxy adhesives

    Science.gov (United States)

    Charles R. Frihart

    2003-01-01

    Although wood was one of the earliest materials to be adhesively bonded, the factors that contribute to strong wood bonds are still not well understood. Wood is a very complex substrate in that it is non-uniform in most aspects. On the macro scale, it is a porous structure with different sized and shaped voids for fluid flow. The structural cells contain four different...

  3. Application of molecular genetic methods for identification of wood-decaying fungi in wood constructions

    OpenAIRE

    Elena Bobeková; Michal Tomšovský; Petr Horáček

    2008-01-01

    The aim of the paper is to evaluate the utilization of molecular biology methods for detection of wood decaying fungi directly from decomposed wood using a commercial DNA extraction kit developed for soil substrates (PowerSoil™ DNA isolation kit). The experiment based on dry rot fungus (Serpula lacrymans) detection from inoculated wooden pieces under laboratory conditions was followed by field detection of wood-decaying fungi from wood structures on building constructions. Fungal DNA was ide...

  4. Laboratory investigations of moisture conditions in wood frame walls with wood fiber insulation

    OpenAIRE

    Geving, Stig; Lunde, Erik; Holme, Jonas

    2015-01-01

    - The purpose of this study was to investigate the moisture conditions in wood frame walls with wood fiber thermal insulation in a Nordic climate. Laboratory measurements were conducted on 15 different wall configurations. The test results showed that the wall configurations with wood fiber insulation performed rather similar as those with mineral wool, in regard to measured relative humidity at the external side of the insulation layer. The laboratory tests showed that wood fiber insulati...

  5. Laboratory investigations of moisture conditions in wood frame walls with wood fiber insulation

    OpenAIRE

    Geving, Stig; Lunde, Erik; Holme, Jonas

    2015-01-01

    The purpose of this study was to investigate the moisture conditions in wood frame walls with wood fiber thermal insulation in a Nordic climate. Laboratory measurements were conducted on 15 different wall configurations. The test results showed that the wall configurations with wood fiber insulation performed rather similar as those with mineral wool, in regard to measured relative humidity at the external side of the insulation layer. The laboratory tests showed that wood fiber insulation in...

  6. Novel perspectives in wood certification and forensics: dry wood as a source of DNA.

    OpenAIRE

    Deguilloux, Marie-France; Pemonge, Marie-Hélène; Petit, Rémy J.

    2002-01-01

    The importance of wood for human societies can hardly be understated. If dry wood were amenable to molecular genetic investigations, this could lead to major applications in wood forensics, certification, archaeology and palaeobotany. To evaluate the potential of wood for molecular genetic investigations, we have attempted to isolate and amplify, by PCR, DNA fragments of increasing size corresponding to all three plant genomes from different regions of 10 oak logs. Stringent procedures to avo...

  7. The use of new, aqueous chemical wood modifications to improve the durability of wood-plastic composites

    Science.gov (United States)

    Rebecca E. Ibach; Craig M. Clemons; George C. Chen

    2017-01-01

    The wood flour used in wood-plastic composites (WPCs) can biologically deteriorate and thus the overall mechanical performance of WPCs decrease when exposed to moisture and fungal decay. Protecting the wood flour by chemical modification can improve the durability of the wood in a nontoxic way so it is not harmful to the environment. WPCs were made with modified wood...

  8. Tropical-wood-induced bullous erythema multiforme.

    Science.gov (United States)

    Shimizu, S; Chen, K R; Pratchyapruit, W O; Shimizu, H

    2000-01-01

    We report a case of bullous erythema multiforme caused by an exotic wood, pao ferro (Machaerium scleroxylon). A 25-year-old female, a luthier (guitar maker) who often handles a variety of woods, developed bullous erythema multiforme. A patch test confirmed a positive reaction to one of the exotic woods, pao ferro. A subsequent accidental short contact with pao ferro 5 months following the first incidence induced a similar exudative erythema. Exotic woods such as pao ferro should be added to the list of contact allergens that can induce bullous erythema multiforme. Copyright (R) 2000 S. Karger AG, Basel.

  9. Wood chemistry in the service of agriculture

    Energy Technology Data Exchange (ETDEWEB)

    Gromov, V.S.

    1982-06-01

    This paper was presented to the general assembly of the Lativan Acadmey of Sciences on the theme of implementaion of the domestic food supply programme. The research work of the Institute of Wood Chemistry, Riga, in this direction is summarized, mainly with regard to wood hydrolysis for fodder production, and utilization of the lignin obtained as a byproduct. Other projects have been concerned with tree leaf fodder, the oleoresin-based fungicide Selmid, improved wood for farm buildings, and related topics outside the wood industry such as straw of improved digestibility to ruminats, and plastic structures.

  10. European wood-pastures in transition

    DEFF Research Database (Denmark)

    Plieninger, Tobias; Hartel, Tibor

    2014-01-01

    Wood-pastures are important elements of European cultural identity and have an exceptional ecological value, yet they are in decline all over Europe. The structure of wood-pastures is strongly influenced by grazing and multiple other land uses and by local and regional environmental conditions....... This book examines the diverse expressions of wood-pastures across Europe. It provides a new perspective, using a social-ecological framework to explore social and ecological values, governing institutions, threats and conservation approaches. It explores the major drivers of decline, which are shown...... conservation policies and management approaches for wood-pastures....

  11. Wood energy 2000; Bois energie 2000

    Energy Technology Data Exchange (ETDEWEB)

    Druette, L. [Centre Scientifique et Technique du Batiment, (CSTB), 44 - Nantes (France); Lacome, T. [AFNOR, 75 - Paris (France); Roy, C. [Agence de l' Environnement et de la Maitrise de l' Energie, ADEME, 75 - Paris (France)] [and others

    2000-07-01

    The deregulation of the Electric Market and the opening of the Green Certificate exchange market force the set up of renewable energies. The wood, which is for most of european countries an important part of renewable fuel, should see the increase of its utilization. This conference on the wood energy deals the main aspects of this energy development. The papers present the wood burning furnaces technology assessment, the wood fuel market and the standardization of the appliances in this domain. Some papers also include the consequences of the big storms of december 1999. (A.L.B.)

  12. Quantitative Wood Anatomy-Practical Guidelines

    National Research Council Canada - National Science Library

    von Arx, Georg; Crivellaro, Alan; Prendin, Angela L; Čufar, Katarina; Carrer, Marco

    2016-01-01

    Quantitative wood anatomy analyzes the variability of xylem anatomical features in trees, shrubs, and herbaceous species to address research questions related to plant functioning, growth, and environment...

  13. Detection of wood failure by image processing method: influence of algorithm, adhesive and wood species

    Science.gov (United States)

    Lanying Lin; Sheng He; Feng Fu; Xiping Wang

    2015-01-01

    Wood failure percentage (WFP) is an important index for evaluating the bond strength of plywood. Currently, the method used for detecting WFP is visual inspection, which lacks efficiency. In order to improve it, image processing methods are applied to wood failure detection. The present study used thresholding and K-means clustering algorithms in wood failure detection...

  14. Integrated control of wood destroying basidiomycetes combining Cu-based wood preservatives and Trichoderma spp.

    Science.gov (United States)

    Ribera, Javier; Fink, Siegfried; Bas, Maria Del Carmen; Schwarze, Francis W M R

    2017-01-01

    The production of new generation of wood preservatives (without addition of a co-biocide) in combination with an exchange of wood poles on identical sites with high fungal inoculum, has resulted in an increase of premature failures of wood utility poles in the last decades. Wood destroying basidiomycetes inhabiting sites where poles have been installed, have developed resistance against wood preservatives. The objective of the in vitro studies was to identify a Trichoderma spp. with a highly antagonistic potential against wood destroying basidiomycetes that is capable of colonizing Cu-rich environments. For this purpose, the activity of five Trichoderma spp. on Cu-rich medium was evaluated according to its growth and sporulation rates. The influence of the selected Trichoderma spp. on wood colonization and degradation by five wood destroying basidiomycetes was quantitatively analyzed by means of dry weight loss of wood specimens. Furthermore, the preventative effect of the selected Trichoderma spp. in combination with four Cu-based preservatives was also examined by mass loss and histological changes in the wood specimens. Trichoderma harzianum (T-720) was considered the biocontrol agent with higher antagonistic potential to colonize Cu-rich environments (up to 0.1% CuSO4 amended medium). T. harzianum demonstrated significant preventative effect on wood specimens against four wood destroying basidiomycetes. The combined effect of T. harzianum and Cu-based wood preservatives demonstrated that after 9 months incubation with two wood destroying basidiomycetes, wood specimens treated with 3.8 kg m-3 copper-chromium had weight losses between 55-65%, whereas containers previously treated with T. harzianum had significantly lower weight losses (0-25%). Histological studies on one of the wood destroying basidiomycetes revealed typical decomposition of wood cells by brown-rot fungi in Cu-impregnated samples, that were notably absent in wood specimens previously exposed to T

  15. The Wood Anatomy of Rubiaceae tribes Anthospermeae and Paederieae

    NARCIS (Netherlands)

    Koek-Noorman, J.; Puff, Ch.

    1983-01-01

    Detailed wood anatomical descriptions are given for the genera Anthospermum, Nenax, Phyllis, Carpacoce, Coprosma, Neogaillonia, Crocyllis, Plocama and Spermadictyon, and miscellaneous wood anatomical data on the genera Normandia, Pomax, Opercularia, Leptodermis and Aitchisonia. The wood anatomical

  16. Social Housing: wood prefabrication techniques

    Directory of Open Access Journals (Sweden)

    Tiziana Ferrante

    2012-10-01

    Full Text Available Student housing, a particular and quite significant part of social housing, and innovation in processing and production of industrial building components made of a material (wood not adequately inquired: two fields of research that have been explored for a long time allowing here to share and compare experiences gained thus far. By a selection of samples of wooden student housing in Europe we have documented the performances of this material and we have underlined, at the same time, through what happens abroad, the need of an organic national social housing plan that can meet an unsatisfied demand and boost the construction industry during this particular stage of economic crisis.

  17. Beech wood – correlations between the quality of trees, logs and sawn wood

    OpenAIRE

    Marenče, Jurij; Gornik Bučar , Dominika; Šega, Bogdan

    2016-01-01

    The research addresses beech wood, from a standing tree to sawn wood. It focuses on the quality evaluation of individual trees and its impact on the later products made of the respective wood. For the needs of observing the quality of standing trees, the current 5-class scale for quality evaluation of the Slovenia Forest Service (SFS) was used. To evaluate the wood assortment, the SIST EN 1316-1:2013 standard was applied, while the evaluation of sawn wood was performed as per the rules of ...

  18. Bacteria in decomposing wood and their interactions with wood-decay fungi.

    Science.gov (United States)

    Johnston, Sarah R; Boddy, Lynne; Weightman, Andrew J

    2016-11-01

    The fungal community within dead wood has received considerable study, but far less attention has been paid to bacteria in the same habitat. Bacteria have long been known to inhabit decomposing wood, but much remains underexplored about their identity and ecology. Bacteria within the dead wood environment must interact with wood-decay fungi, but again, very little is known about the form this takes; there are indications of both antagonistic and beneficial interactions within this fungal microbiome. Fungi are hypothesised to play an important role in shaping bacterial communities in wood, and conversely, bacteria may affect wood-decay fungi in a variety of ways. This minireview considers what is currently known about bacteria in wood and their interactions with fungi, and proposes possible associations based on examples from other habitats. It aims to identify key knowledge gaps and pressing questions for future research. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  19. Kraft pulping of industrial wood waste

    Science.gov (United States)

    Aziz. Ahmed; Masood. Akhtar; Gary C. Myers; Gary M. Scott

    1998-01-01

    Most of the approximately 25 to 30 million tons of industrial wood waste generated in the United States per year is burned for energy and/or landfilled. In this study, kraft pulp from industrial wood waste was evaluated and compared with softwood (loblolly pine, Douglas-fir) and hardwood (aspen) pulp. Pulp bleachability was also evaluated. Compared to loblolly pine...

  20. Wood properties from roundwood to timber engineering

    NARCIS (Netherlands)

    van de Kuilen, J.W.G.; Eberhardsteiner, J.; Winter, W.; Fadai, A.; Pöll, M.

    2016-01-01

    Measuring and assessing wood properties during the production chain is getting more and more important for an optimal use of the resource. Over the years, research has been performed with the focus on establishing important wood properties, with the final goal of an

  1. Waste-wood-derived fillers for plastics

    Science.gov (United States)

    Brent English; Craig M. Clemons; Nicole Stark; James P. Schneider

    1996-01-01

    Filled thermoplastic composites are stiffer, stronger, and more dimensionally stable than their unfilled counterparts. Such thermoplastics are usually provided to the end-user as a precompounded, pelletized feedstock. Typical reinforcing fillers are inorganic materials like talc or fiberglass, but materials derived from waste wood, such as wood flour and recycled paper...

  2. The market for wood picnic structures.

    Science.gov (United States)

    Jerry A. Sesco

    1969-01-01

    Most of the picnic structures in six north-central states studied were constructed of wood. Service life of structure varied greatly. Vandalism and decay were the major reasons for repairing and replacing picnic tables. More than half the tables were made by the recreation agencies themselves. These results describe a market that existing and potential wood...

  3. Wood anatomy of the Neotropical Melastomataceae

    NARCIS (Netherlands)

    Welle, ter Ben J.H.; Koek-Noorman, Jifke

    1981-01-01

    The wood anatomy of 47 genera of the neotropical Melastomataceae is described in detail. The wood anatomy of the neotropical part of this pantropical family supports the subdivision into two groups: the subfamily Memecyloideae (the genus Mouriri) and the subfamily Melastomatoideae (all other

  4. Wood and fish residuals composting in Alaska

    Science.gov (United States)

    David Nicholls; Thomas Richard; Jesse A. Micales

    2002-01-01

    The unique climates and industrial mix in southeast and south central Alaska are challenges being met by the region's organics recyclers. OMPOSTING wood residuals in Alaska has become increasingly important in recent years as wood processors and other industrial waste managers search for environmentally sound and profitable outlets. Traditionally, Alaska?s...

  5. Evaluation of Paulownia elongata wood polyethylene composites

    Science.gov (United States)

    Paulownia wood flour (PWF), a byproduct of milling lumber, was employed as a bio-filler and blended with high density polyethylene (HDPE) via extrusion. Paulownia wood (PW) shavings were milled through a 1-mm screen then separated via shaking into various particle fractions using sieves (#30 - #2...

  6. Chapter 01: Wood identification and pattern recognition

    Science.gov (United States)

    Alex Wiedenhoeft

    2011-01-01

    Wood identification is a combination of art and science. Although the bulk of this manual focuses on the scientific characteristics used to make accurate field identifications of wood, the contribution of the artistic component to the identification process should be neither overlooked nor understated. Though the accumulation of scientific knowledge and experience is...

  7. Wood Sculpture in the Elementary School

    Science.gov (United States)

    Boschen, Joyce

    1972-01-01

    The article discusses various approaches used by first to fifth graders in designing, constructing and sculpting wood pieces. In this case, small wooden parts were donated by a local factory. Article includes useful hints, such as that soft woods are better for younger children, trial and error methods increase enjoyment. (PD)

  8. Protecting wood fences for yard and garden

    Science.gov (United States)

    R. C. De Groot; W. C. Feist; W. E. Eslyn; L. R. Gjovik

    For maximum protection against wood decay and termites, use posts that have an in-depth preservative treatment, preferably a pressure treatment for below ground use. When selecting posts of naturally decay-resistant woods, choose posts with mostly heartwood. Horizontal rails require more protection from decay than do vertical boards. In regions of high and moderate...

  9. Wood decay and the cleanup crew

    Science.gov (United States)

    Kevin T. Smith; Jessie A. Glaeser

    2017-01-01

    Arborists are encouraged to recognize the wood-decay process as an important factor in tree health and public safety. Technical experts who develop training materials to recognize wood-decay processes in living trees are frequently forest pathologists. Much of the history of forest pathology was to support production of sound, high-quality timber. That heritage is...

  10. Micromechanical measurement of wood substructure properties.

    Science.gov (United States)

    David E. Kretschmann; Troy W. Schmidt; Roderic S. Lakes; Steven M. Cramer

    2002-01-01

    The annual rings of softwoods are visually obvious and represent cylindrical layers of primarily cellulosic material that possess significantly different properties. For simplicity, wood construction products are designed assuming a material homogeneity that does not exist. As rapidly grown plantation trees are used for wood products, fewer rings are contained in an...

  11. Wood as a sustainable building material

    Science.gov (United States)

    Robert H. Falk

    2010-01-01

    Few building materials possess the environmental benefits of wood. It is not only our most widely used building material but also one with characteristics that make it suitable for a wide range of applications. As described in the many chapters of this handbook, efficient, durable, and useful wood products produced from trees can range from a minimally processed log at...

  12. Surface thermodynamic parameters of modified wood

    Directory of Open Access Journals (Sweden)

    Pokrovskaya Elena

    2016-01-01

    Full Text Available Energy characteristics of modified wood are studied in the paper. Application of this approach during the study of wooden materials allows forecasting the efficiency of modifiers for surface layer of wood. Phosphites, the efficient fire-retarders, were applied as modifiers. Using the example of a number of ethers with various alkoxy substituents of phosphorus atom, we have made an attempt to associate surface thermodynamic properties of modified wood and formation of properties for fire-, bio- and smoke protection. The dependence of change of energy characteristics and surface structure of wood on the nature of modifiers is determined. To study energy characteristics of wood, modified by various compounds, the following characteristics were used: σ surface tension and ΔG free enthalpy gradient. Easy Drop setting and the corresponding software were used to determine these values. According to the obtained data, the conclusion is made about the influence of modifiers on energy characteristics of wood. The high degree of modification (% P causes bigger change of Gibbs energy, which determines formation of high-level fire-, bio- and smoke protection. Diethyl phosphite is the most efficient modifier. Formation of fire-protective properties stipulates long-term operation of wood and wood-based materials.

  13. Chapter 9:Wood Adhesion and Adhesives

    Science.gov (United States)

    Charles R. Frihart

    2013-01-01

    The recorded history of bonding wood dates back at least 3000 years to the Egyptians (Skeist and Miron 1990, River 1994a), and adhesive bonding goes back to early mankind (Keimel 2003). Although wood and paper bonding are the largest applications for adhesives, some of the fundamental aspects leading to good bonds are not fully understood. Better understanding of these...

  14. Ultrasound Transmission Times in Biologically Deteriorated Wood

    Science.gov (United States)

    Christopher Adam Senalik; Robert J. Ross; Rodney DeGroot

    2015-01-01

    The use of a variety of stress wave transmission techniques for the in-service condition assessment of deteriorated wood is well documented. This paper summarizes results from an extensive study designed to examine the relationship between ultrasound transmission times and the deterioration of exposed wood. Two hundred seventy (270) southern pine lumber specimens were...

  15. Wood anatomy of the Palaeotropical Melastomataceae

    NARCIS (Netherlands)

    Vliet, van G.J.C.M.

    1981-01-01

    The wood anatomy of the palaeotropical Melastomataceae is described in detail on the basis of 134 samples of 107 species from 36 genera. On the wood anatomy, three subfamilies are recognized, Memecyloideae, Melastomatoideae, and Crypteronioideae. The Memecyloideae stand out through their

  16. Turbulence and Araki-Woods factors

    DEFF Research Database (Denmark)

    Sasyk, R.; Törnquist, A.; Törnquist, Asger Dag

    2010-01-01

    Using Baire category techniques we prove that Araki-Woods factors are not classifiable by countable structures. As a result, we obtain a far reaching strengthening as well as a new proof of the well-known theorem of Woods that the isomorphism problem for ITPFI factors is not smooth. We derive as ...

  17. COMPOSITES FROM RECYCLED WOOD AND PLASTICS

    Science.gov (United States)

    The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. Two processing technologies were used to prepare wood-plastic composites: air-laying and melt...

  18. Chapter 13:Wood/Nonwood Thermoplastic Composites

    Science.gov (United States)

    Craig M. Clemons; Roger M. Rowell; David Plackett; B. Kristoffer Segerholm

    2013-01-01

    Composites made from wood, other biomass resources and polymers have existed for a long time but the nature of many of these composites has changed in recent decades. Wood-thermoset composites date to the early 1900s. "Thermosets" or thermosetting polymers are plastics that, once cured, cannot be remelted by heating. These include cured resins such as epoxies...

  19. Chapter 16: Soy Proteins as Wood Adhesives

    Science.gov (United States)

    Charles R. Frihart; Christopher G. Hunt; Michael J. Birkeland

    2014-01-01

    Protein adhesives allowed the development of bonded wood products such as plywood and glulam in the early 20th century. Petrochemical-based adhesives replaced proteins in most wood bonding applications because of lower cost, improved production efficiencies, and enhanced durability. However, several technological and environmental factors have led to a resurgence of...

  20. Camp Lejeune Energy from Wood (CLEW) project

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, J.G. [Research Triangle Institute, Research Triangle Park, NC (United States); Purvis, C.R. [U.S. Environmental Protection Agency, Research Triangle Park, NC (United States)

    1999-07-01

    This demonstration project converts wood energy to electrical power, uses waste and alleviates pollution. The 1 MWe plant operates a reciprocating engine-generator set on synthetic gas from a down-draft wood gasifier. This paper discusses plant descriptions, operational characteristics, performance data, and needed modifications. (author)

  1. (Maryland) wood heating project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The following recommendations and suggestions may be made to the homeowner and small business that might use supplemental wood heat up to 150,000 Btu requirement: (1) The cost of firewood must be kept as low as possible. If costs presently are much over $90/cord there must be very efficient use of the equipment. An owner may be willing to write off the cost of his own labor, but that can rather quickly turn sour if they are not used to heavy work and have the proper equipment to work with. (2) Care must be taken in selecting manufacturer and dealer so that parts and warranty repair are available in the future. We have run into this problem and an owner must beware. (3) A wood or wood/coal furnace is a much better investment than a large wood stove. Costs are less and heat distribution is superior. (4) A small moderately priced stove is better for heating a small area. (5) Wood units must burn hot for satisfactory combustion and heat production. (6) Burning a wood unit in moderate weather creates more problems than it solves. (7) Follow the instructions in the provided manual to the letter. (8) Study wood heat principals before investing in equipment. (9) Insulated chimneys are superior to all others from a practical standpoint. (10) Satisfaction comes only with adequate research and planning all aspects of wood burning. If all personnel involved are not dedicated to its use, results will be less than desirable.

  2. NeighbourWoods for Better Cities

    DEFF Research Database (Denmark)

    Konijnendijk, Cecil Cornelis; Schipperijn, Jasper Jan

    This publication aims to contribute to the development af NeighbourWoods through socially-inclusive planning, design and management. It presents experiences from an international project supported by the European Commission which evaluated and developed approaches and tools to assist NeighbourWood...

  3. Analysis of acetylated wood by electron microscopy

    NARCIS (Netherlands)

    Sander, C.; Beckers, E.P.J.; Militz, H.; Veenendaal, van W.

    2003-01-01

    The properties of acetylated solid wood were investigated earlier, in particular the anti-shrink efficiency and the resistance against decay. This study focuses on the possible changes and damage to the wood structure due to an acetylation process leading to weight per cent gains of up to 20%.

  4. The wood structure of Dicranostyles (Convolvulaceae)

    NARCIS (Netherlands)

    Mennega, Alberta M.W.

    1969-01-01

    The anatomy of the mature wood of three species of the South American genus of woody climbers Dicranostyles Bth. is described and compared with that of the secondary wood of other genera of the Convolvulaceae. The stems are characterized by the occurrence of concentric rings of included phloem

  5. Finishability of CCA pressure-treated wood

    Science.gov (United States)

    Alan Ross; Richard Carlson; William Feist; Steven Bussjaeger

    2000-01-01

    Thus, a need arose for the development of surface finishes for CCA-treated wood that could address the special requirements of this substrate and provide protection against the ravages of water, sunlight, mildew, and other aspects of weathering and wear. Initially, this need was not addressed, most wood preserving companies had little expertise in surface finishes and...

  6. Wood and leaf anatomy of Opiliaceae

    NARCIS (Netherlands)

    Koek-Noorman, J.; Rijckevorsel, v. P.

    1983-01-01

    The wood and leaf anatomy of representatives of the 9 genera of the Opiliaceae are described in detail. It is possible to separate the genera on the base of both wood- and leaf anatomical characters. Herein the presence of cystoliths of varying shape and size is important. Some comments on the

  7. Wood energy markets, 2011-2012

    Science.gov (United States)

    Francisco Aguilar; Rens Hartkamp; Warren Mabee; Kenneth Skog

    2012-01-01

    To celebrate the 2012 International Year of Sustainable Energy for All, in this chapter we consider in some depth the sustainability of wood energy. To do so, we evaluate the traditional economic, environmental and social dimensions of the sustainability concept. We also address how public policy has influenced wood energy sustainability across the UNECE region.

  8. Environmental education on wood preservatives and preservative ...

    African Journals Online (AJOL)

    The development and use of wood preservatives in Nigeria should address not only the cost and demand functions but also the potential hazards in environmental equations. Forest products specialists are often asked about the perceived risks and environmental costs of treated wood products. Evidently, the civil society is ...

  9. Least cost supply strategies for wood chips

    DEFF Research Database (Denmark)

    Möller, Bernd

    The abstract presents a study based on a geographical information system, which produce  cost-supply curves by location for forest woods chips in Denmark.......The abstract presents a study based on a geographical information system, which produce  cost-supply curves by location for forest woods chips in Denmark....

  10. Wood Identification of 18th Century Furniture. Interpreting Wood Naming Inventoires

    Directory of Open Access Journals (Sweden)

    Rocio Astrid BERNAL

    2011-09-01

    Full Text Available The 18th century Portuguese church furniture represents an extraordinary richness recognised worldwide, which demands safeguarding and valorisation. The identification of the wood of furniture artworks is the most important component for its comprehension and preservation. In this work wood anatomical characters of an 18th century Portuguese decorative furniture set from the Colegiada de São Martinho de Cedofeita, in Porto, were analysed to identify the woods used for manufacturing and to clarify their common names. Furthermore, the objectives were to recognise some of the criteria for choice of wood as well as the source of each wood. The woods identified from 16 fragments belong to Apuleia sp., Acacia sp., Neolamarckia sp. and Castanea sativa. Apuleia sp. and Acacia sp. woods most likely arrived from Brazil, while the Neolamarckia sp. woods likely arrived from India and the C. sativa woods from Portugal. The results are in accordance with the known Portuguese colonial sea routes of the 15th -18th centuries. Interestingly the terms found in the inventories can refer to finishing methods instead to the name of the woods, as for instance “oil wood” can refer to “oiled wood” or “linseed oiled wood”. The species choice may be related to the mechanical properties of the wood as well as the original tree size. Two large planks of Acacia sp. were used for the top of the “Portuguese arcaz”, and Apuleia sp. was found on main structural elements of this set of furniture, suggesting that wood colour was also important. Woods from Neolamarckia sp. and C. sativa, were also identified, being Castanea wood present only in the most recent pieces of the furniture set.

  11. Physiological Effects of Touching Wood

    Directory of Open Access Journals (Sweden)

    Harumi Ikei

    2017-07-01

    Full Text Available This study aimed to clarify the physiological effects of touching wood with the palm, in comparison with touching other materials on brain activity and autonomic nervous activity. Eighteen female university students (mean age, 21.7  ±  1.6 years participated in the study. As an indicator of brain activity, oxyhemoglobin (oxy-Hb concentrations were measured in the left/right prefrontal cortex using near-infrared time-resolved spectroscopy. Heart rate variability (HRV was used as an indicator of autonomic nervous activity. The high-frequency (HF component of HRV, which reflected parasympathetic nervous activity, and the low-frequency (LF/HF ratio, which reflected sympathetic nervous activity, were measured. Plates of uncoated white oak, marble, tile, and stainless steel were used as tactile stimuli. After sitting at rest with their eyes closed, participants touched the materials for 90 s. As a result, tactile stimulation with white oak significantly (1 decreased the oxy-Hb concentration in the left/right prefrontal cortex relative to marble, tile, and stainless steel and (2 increased ln(HF-reflected parasympathetic nervous activity relative to marble and stainless steel. In conclusion, our study revealed that touching wood with the palm calms prefrontal cortex activity and induces parasympathetic nervous activity more than other materials, thereby inducing physiological relaxation.

  12. Use of nanofillers in wood coatings

    DEFF Research Database (Denmark)

    Nikolic, Miroslav; Lawther, John Mark; Sanadi, Anand Ramesh

    2015-01-01

    Wood has been used for thousands of years and remains an important material in the construction industry, most often protected with coatings. Development of nanotechnology allows further improvements or new performance properties to be achieved in wood coatings. Increased UV protection...... with nanometal oxides that allow wood texture to remain seen and higher resilience to scratch and abrasion with use of different nanoparticle shapes are some of the applications that are reviewed here. A variety of possible applications together with a high level of improvements, alongside commercial factors...... like a low level of loading, have already established nanoparticles in some areas of wood coatings. This article is a comprehensive scientific review of the published work in the use of nanofillers in wood coatings....

  13. Optimising hydrogen bonding in solid wood

    DEFF Research Database (Denmark)

    Engelund, Emil Tang

    2009-01-01

    The chemical bonds of wood are both covalent bonds within the wood polymers and hydrogen bonds within and between the polymers. Both types of bonds are responsible for the coherence, strength and stiffness of the material. The hydrogen bonds are more easily modified by changes in load, moisture...... and temperature distorting the internal bonding state. A problem arises when studying hydrogen bonding in wood since matched wood specimens of the same species will have very different internal bonding states. Thus, possible changes in the bonding state due to some applied treatment such as conditioning...... maintaining 100 % moisture content of the wood. The hypothesis was that this would enable a fast stress relaxation as a result of reorganization of bonds, since moisture plasticizes the material and temperature promotes faster kinetics. Hereby, all past bond distortions caused by various moisture, temperature...

  14. Wood for energy production. Technology - environment - economy

    Energy Technology Data Exchange (ETDEWEB)

    Serup, H.; Falster, H.; Gamborg, C. [and others

    1999-10-01

    `Wood for Energy Production`, 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named `Wood Chips for Energy Production`. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. `Wood for Energy Production` is also available in German and Danish. (au)

  15. Alaska Wood Biomass Energy Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Jonathan Bolling

    2009-03-02

    The purpose of the Craig Wood Fired Boiler Project is to use waste wood from local sawmilling operations to provide heat to local public buildings, in an effort to reduce the cost of operating those buildings, and put to productive use a byproduct from the wood milling process that otherwise presents an expense to local mills. The scope of the project included the acquisition of a wood boiler and the delivery systems to feed wood fuel to it, the construction of a building to house the boiler and delivery systems, and connection of the boiler facility to three buildings that will benefit from heat generated by the boiler: the Craig Aquatic Center, the Craig Elementary School, and the Craig Middle School buildings.

  16. Structure and function of flexure wood in Abies fraseri.

    Science.gov (United States)

    Telewski, F W

    1989-03-01

    Wood produced during flexure in one-year-old leaders of Abies fraseri (Pursh) Poir. (Fraser fir) was analyzed anatomically and radio-densitometrically. More xylem cells were produced in stems subjected to flexing than in stems that were not flexed. The lumens of tracheids produced in response to flexure were smaller than the lumens of tracheids in normal wood. This was manifest as an increase in the cell wall area/cell lumen area ratio. Microfibril orientation in flexure-induced wood approached the less extreme values found in compression wood. The growth ring composed of flexure-induced wood also had a greater density than normal wood. Compression wood, as defined by cellular characteristics observed in transverse section, was absent in flexed stems. Detailed analysis of the anatomical structure, wood density and biomechanical properties of flexure-induced wood indicated that it has more in common with compression wood than with normal wood.

  17. Wood surface roughness: an impact of wood species, grain direction and grit size

    Directory of Open Access Journals (Sweden)

    Justina Vitosytė

    2015-06-01

    Full Text Available For the research the samples of ash (Fraxinus excelsior L., birch (Betula L., black alder (Alnus glutinosa L., Scots pine (Pinus Sylvestris L. and spruce (Picea abies L. wood were used with dimensions of 270×215×15 mm. All wood samples were tangentially planed, defect free and kiln dried. Before the research, the average moisture content, wood density, number of annual rings per 1 cm, average width of annual ring and wood surface grain direction were evaluated. Different wood surface roughness of the samples was obtained sanding wood samples in the eccentric sanding stand, using standard open-type sandpaper with different grit size. The arithmetic mean value of the single roughness depths of consecutive sampling lengths parameter Rz of the sanded wood samples were measured in five sectors along the wood grain, across and in the angle of 45°, using a contact stylus profilometer. In total 1800 measurements were done during testing series. Obtained measurement results were processed by digital Gaussian filter according to DIN EN ISO 11562. In the research the dependence of wood surface on wood species, grain direction and grit size of abrasive material was evaluated.DOI: http://dx.doi.org/10.5755/j01.ms.21.2.5882

  18. Comparação entre a eficiência estrutural de perfis soldados de aço e perfis de aço formados a frio

    Directory of Open Access Journals (Sweden)

    Uiatan Aguiar Nogueira

    2016-08-01

    Full Text Available RESUMO: A Análise de elementos estruturais, realizadas durante as etapas de projeto de uma estrutura, é parte fundamental para garantia de bom desempenho e estabilidade do sistema estrutural. Na execução de algumas estruturas, como as coberturas em edificações, é usual o emprego de perfis leves de aço formados a frio devido ao seu baixo peso. Esta pesquisa tem por objetivo avaliar a eficiência estrutural desses perfis quando comparados, por exemplo, aos perfis soldados compactos. Para tanto, foram realizados ensaios de flexão em quatro vigas biapoiadas submetidas a duas forças concentradas, de forma a se obter flexão pura no meio do vão das vigas. Estas foram instrumentadas para a determinação da sua rigidez e da sua resistência à flexão. A principal contribuição deste trabalho é demonstrar a eficiência estrutural de perfis formados a frio em seção caixa submetidos à flexão em comparação com perfis de seção tipo “H” soldados. ABSTRACT: The analysis of structural elements, in a structure’s design, is an essential step to ensure good performance and stability of the structural system. In any types of structures, such as roofing in buildings, it’s usual using cold-formed steel beams due to their small weight. This research seeks to evaluate the structural efficiency of cold-formed steel beams when compared, for example, to compact welded steel beams. Thus, bending tests were performed in four simply supported beams submitted to two concentrated loads, in order to obtain pure flexure at the mid-span of the beams. These beams were instrumented for the determination of their rigidity and bending strength. The results showed that the cold-formed steel beam, box-shaped, presented structural efficiency similar to the welded steel beam “H” shaped.

  19. Utilisation of Estonian energy wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Muiste, P.; Tullus, H.; Uri, V. [Estonian Agricultural University, Tartu (Estonia)

    1996-12-31

    In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

  20. Wood impregnation of yeast lees for winemaking.

    Science.gov (United States)

    Palomero, Felipe; Bertani, Paolo; Fernández de Simón, Brígida; Cadahía, Estrella; Benito, Santiago; Morata, Antonio; Suárez-Lepe, José A

    2015-03-15

    This study develops a new method to produce more complex wines by means of an indirect diffusion of wood aromas from yeast cell-walls. An exogenous lyophilized biomass was macerated with an ethanol wood extract solution and subsequently dried. Different times were used for the adsorption of polyphenols and volatile compounds to the yeast cell-walls. The analysis of polyphenols and volatile compounds (by HPLC/DAD and GC-MS, respectively) demonstrate that the adsorption/diffusion of these compounds from the wood to the yeast takes place. Red wines were also aged with Saccharomyces cerevisiae lees that had been impregnated with wood aromas and subsequently dried. Four different types of wood were used: chestnut, cherry, acacia and oak. Large differences were observed between the woods studied with regards to their volatile and polyphenolic profiles. Sensory evaluations confirmed large differences even with short-term contact between the wines and the lees, showing that the method could be of interest for red wine making. In addition, the results demonstrate the potential of using woods other than oak in cooperage. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Wood quality changes caused by mineral fertilization

    Directory of Open Access Journals (Sweden)

    Carlos Roberto Sette Jr

    2014-06-01

    Full Text Available The diverse and important use of wood from fast growth eucalyptus plantations requires the analysis of the effect of mineral fertilizers on wood quality. The objective of this study was to evaluate the anatomical characteristics and wood density from Eucalyptus grandis trees (3 m x 2 m spacing fertilized with potassium and sodium (at planting, 6 th and 12th month. Fifteen (15 6 years old eucalyptus trees were selected (5 trees/treatment, cut and wood samples at DBH (1,3 m were taken for anatomical characteristics (fiber and vessels and wood density analysis. Results showed that eucalyptus trees treated with mineral fertilizers did not show significant alteration in average wood density, with radial profile model common to all three treatments, characterized by a values increase in the region next to the pith, toward to bark. Mineral fertilization influenced wood anatomical characteristics: treatment with sodium was characterized by thinner walls and lumen larger diameter; in treatment with potassium, larger vessels were detected.

  2. Production and characterization of charcoal from species and varieties of bamboos; Producao e caracterizacao do carvao vegetal de especies e variedades de bambu

    Energy Technology Data Exchange (ETDEWEB)

    Brito, J.O.; Tomazello Filho, M. [Sao Paulo Univ., Piracicaba, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz; Barros Salgado, A.L. de [Instituto Agronomico de Campinas, SP (Brazil)

    1987-12-31

    Samples of bamboo culms (B. vulgaris var. vittata, B vulgaris, B. tuldoides. Dendrocalamus, Guandua angustifolia) were collected in three longitudinal positions from adult culms and carbonized in laboratory conditions. Eucalypt (E. urophilla hybrid) wood was used as a comparative parameter. Differences between the charcoal from the bamboo species and Eucalypt were observed. The bamboo culms presented higher values of lignin and holorcelulose in relation to wood samples. The bamboo culms provided higher charcoal yields and non-condensable gases.The bamboo charcoal was denser and with higher ash content in relation to wood charcoal. (author). 17 refs., 5 tabs

  3. Quantitative wood anatomy - practical guidelines

    Directory of Open Access Journals (Sweden)

    Georg evon Arx

    2016-06-01

    Full Text Available Quantitative wood anatomy analyzes the variability of xylem anatomical features in trees, shrubs and herbaceous species to address research questions related to plant functioning, growth and environment. Among the more frequently considered anatomical features are lumen dimensions and wall thickness of conducting cells, fibers and several ray properties. The structural properties of each xylem anatomical feature are mostly fixed once they are formed, and define to a large extent its functionality, including transport and storage of water, nutrients, sugars and hormones, and providing mechanical support. The anatomical features can often be localized within an annual growth ring, which allows to establish intra-annual past and present structure-function relationships and its sensitivity to environmental variability. However, there are many methodological obstacles to overcome when aiming at producing (large data sets of xylem anatomical data.Here we describe the different steps from wood sample collection to xylem anatomical data, provide guidance and identify pitfalls, and present different image-analysis tools for the quantification of anatomical features, in particular conducting cells. We show that each data production step from sample collection in the field, microslide preparation in the lab, image capturing through an optical microscope and image analysis with specific tools can readily introduce measurement errors between 5 to 30% and more, whereby the magnitude usually increases the smaller the anatomical features. Such measurement errors – if not avoided or corrected – may make it impossible to extract meaningful xylem anatomical data in light of the rather small range of variability in many anatomical features as observed, for example, within time series of individual plants. Following a rigid protocol and quality control as proposed in this paper is thus mandatory to use quantitative data of xylem anatomical features as a powerful

  4. Finite Element Analysis Of Boron Diffusion In Wood

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Hoffmeyer, Preben; Bechgaard, Carl

    2002-01-01

    The coupled heat and mass transfer equations for air, water and heat transfer are supplemented with a conservation equation for an additional species representing the concentration of boron in wood. Boundary conditions for wood-air. wood-soil and wood-boron interfaces arc discussed and finally...

  5. The compression of wood/thermoplastic fiber mats during consolidation

    Science.gov (United States)

    Karl R. Englund; Michael P. Wolcott; John C. Hermanson

    2004-01-01

    Secondary processing of non-woven wood and wood/thermoplastic fiber mats is generally performed using compression molding, where heated platens or dies form the final product. Although the study and use of wood-fiber composites is widespread, few research efforts have explicitly described the fundamentals of mat consolidation. In contrast, the wood composite literature...

  6. Housing and the wood industry, trends & market conditions

    Science.gov (United States)

    Urs Buehlmann; Matt Bumgardner; Al Schuler; K. Koenig

    2011-01-01

    Housing markets continue to have major impacts on the secondary wood industry. So, what are the steps being taken by wood products manufacturers in order to stay viable? As a follow-up to last year's article, "Housing Market's Impact on the Secondary Woodworking Industry" (Wood & Wood Products, July 2010), the focus of this year's study was...

  7. The use and market for wood in the electrometallurgical industry

    Science.gov (United States)

    Jeffery L. Wartluft; Jeffery L. Wartluft

    1971-01-01

    Wood residues, particularly large chips, play an important role in the electric smelting of certain ferro-alloys. This is a report on the characteristics and growth potential of the market for wood in the electrometallurgicaI industry, including a brief account of how wood is used in electrometallurgical processes, a discussion of the preferred form of wood used, a...

  8. Raman spectroscopic characterization of wood and pulp fibers

    Science.gov (United States)

    Umesh Prasad Agarwal

    2008-01-01

    This chapter reviews applications of Raman spectroscopy in the field of wood and pulp fibers. Most of the literature examined was published between 1998 and 2006. In addition to introduction, this chapter contains sections on wood and components, mechanical pulp, chemical pulp, modified/treated wood, cellulose I crystallinity of wood fibers, and the self-absorption...

  9. Achieving wood energy potentials: evidence in northeastern Minnesota.

    Science.gov (United States)

    Dennis P. Bradley; David C. Lothner

    1987-01-01

    A study of wood energy potential in northeastern Minnesota concludes that (1) the forests of the region could support a much larger wood energy harvest without significant cost increases for other forest products; (2) existing stands are predominantly overmature and cutting more now will enhance future wood supplies for all users; (3) converting to wood energy could...

  10. Selection and application of exterior stains for wood

    Science.gov (United States)

    R. Sam. Williams; William C. Feist

    1999-01-01

    Exterior stains for wood protect the wood surface from sunlight and moisture. Because stains are formulated to penetrate the wood surface, they are not prone to crack or peel as can film-forming finishes, such as paints. This publication describes the properties of stains and wood, methods for applying stains, and the expected service life of stains.

  11. Wood construction codes issues in the United States

    Science.gov (United States)

    Douglas R. Rammer

    2006-01-01

    The current wood construction codes find their origin in the 1935 Wood Handbook: Wood as an Engineering Material published by the USDA Forest Service. Many of the current design recommendations can be traced back to statements from this book. Since this time a series of development both historical and recent has led to a multi-layered system for use of wood products in...

  12. Electrochemical corrosion testing of fasteners in extracts of treated wood

    Science.gov (United States)

    Samuel L. Zelinka; Douglas R. Rammer; Donald S. Stone

    2008-01-01

    A recent change in wood preservatives has highlighted the need for a rapid, quantitative test to measure the corrosion rates of metals in contact with treated wood that could be used to evaluate new fasteners or new wood preservatives. A new method was developed where polarisation resistance tests were conducted on fasteners exposed to a water extract of wood treated...

  13. Logistics Significance of Wood Product Manufacturing on Competitiveness Based Management

    OpenAIRE

    Fedotova, K; Geipele, I; Geipele, S

    2012-01-01

    Topicality is associated with the important contribution of wood products manufacturing in Latvian economy. Important role in development of wood products manufacturing has improvement of wood products manufacturing that includes acceptance of strategic management decisions and solutions for wwod resource flow optimization throughout wood products added value chain, as well as an interference with related industries.

  14. Consumer preference study of characteristics of Hawaiian koa wood bowls

    Science.gov (United States)

    Eini C Lowell; Katherine Wilson; Jan Wiedenbeck; Catherine Chan; J. B. Friday; Nicole Evans

    2017-01-01

    Koa (Acacia koa A. Gray), a species endemic to the Hawaiian Islands, has ecological, cultural, and economic significance. Its wood is prized globally but today, most woodworkers only use koa wood from dead and dying old-growth trees. The general perception of wood from young-growth koa is that it lacks the color and figure of old-growth wood and is...

  15. Relationship of wood surface energy to surface composition

    Science.gov (United States)

    Feipeng P. Liu; Timothy G. Rials; John Simonsen

    1998-01-01

    The wood cell wall is composed of cellulose, lignin, hemicelluloses, and extractives. Thus, the surface energy of the wood material must be some combination of the surface energies of these components. The influence of extractives on wood surface chemistry can be important in diverse industrial applications, such as coating, pulping, and wood-based composites. In this...

  16. Factors that lead to failure with wood adhesive bonds

    Science.gov (United States)

    Charles R. Frihart; James F. Beecher

    2016-01-01

    Understanding what makes a good wood adhesive is difficult since the type of adhesive, wood species, bonding process, and resultant products vary considerably. Wood bonds are subjected to a variety of tests that reflect the different product performance criteria in diverse countries. The most common tests involve some type of moisture resistance; both wood and adhesive...

  17. Wood and Other Materials Used to Construct Nonresidential Buildings - Canada

    Science.gov (United States)

    David B. McKeever; Joe Elling

    2014-01-01

    Low-rise nonresidential building construction is an important market in Canada for lumber, engineered wood products, structural wood panels, and nonstructural wood panels. This report examines wood products consumption in 2012 for construction of selected low-rise nonresidential buildings types that have six or fewer stories. Buildings with more than six stories are...

  18. Acetylation of wood components and fourier transform infra-red ...

    African Journals Online (AJOL)

    In this study, the reactivity of wood components with acetic anhydride or vinyl acetate was studied. It was found that the reactivity of wood components was virgin wood flour > holocellulose >> a-cellulose. Acetylation of Turkish pine or cedar wood flour with acetic anhydride was significantly improved in the presence of ...

  19. Mathematical modelling of wood and briquettes torrefaction

    Energy Technology Data Exchange (ETDEWEB)

    Felfli, Felix Fonseca; Luengo, Carlos Alberto [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Fisica Gleb Wataghin. Grupo Combustiveis Alternativos; Soler, Pedro Beaton [Universidad de Oriente, Santiago de Cuba (Cuba). Fac. de Ingenieria Mecanica. Centro de Estudios de Eficiencia Energetica; Rocha, Jose Dilcio [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico (NIPE)

    2004-07-01

    A mathematical model valid for the torrefaction of wood logs and biomass briquettes is presented. The model described both chemical and physical processes, which take place in a moist piece of wood heated at temperatures between 503 and 573 K. Calibration measurements of the temperature profile and mass loss, were performed on dry cylinders of wood samples during torrefaction in an inert atmosphere at 503, 533, and 553 K. The calculated data shows a good agreement with experiments. The model can be a useful tool to estimate projecting and operating parameters for torrefaction furnaces such as minimum time of torrefaction, energy consumption and the mass yield. (author)

  20. Moisture-driven fracture in solid wood

    DEFF Research Database (Denmark)

    Larsen, Finn; Ormarsson, Sigurdur; Olesen, John Forbes

    2011-01-01

    process, suggesting that sealing the ends of timber logs while in the green moisture state could considerably reduce the development of end-cracks. The initial moisture content and the shrinkage properties of the wood varied markedly from pith to bark. The importance of taking material inhomogeneities......Moisture-induced fractures in solid timber create considerable problems for both building industries and sawmills. Cracks caused by kiln-drying of solid timber are extremely difficult to predict. This paper reports on experiments concerned with methods of reducing cracks in wood...... into account when modelling crack propagation in solid wood is emphasized. © 2011 Taylor & Francis....

  1. Weathering Characteristics of Wood Plastic Composites Reinforced with Extracted or Delignified Wood Flour

    Directory of Open Access Journals (Sweden)

    Yao Chen

    2016-07-01

    Full Text Available This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF. The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE, acetone/water (AW, and hot water (HW, or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial weathering under accelerated conditions were characterized by Fourier transform infrared (FTIR spectroscopy, the surface color parameters were analyzed using colorimetry, and the mechanical properties were determined by a flexural test. Weathering of WPC resulted in a surface lightening and a decrease in wood index (wood/HDPE and flexural strength. WPCs that were reinforced with delignified wood flour showed higher ΔL* and ΔE* values, together with lower MOE and MOR retention ratios upon weathering when compared to those with non-extracted control and extracted WF.

  2. Coal and wood fuel for electricity production: An environmentally sound solution for waste and demolition wood

    Energy Technology Data Exchange (ETDEWEB)

    Penninks, F.W.M. [EPON, Zwolle (Netherlands)

    1997-12-31

    Waste wood from primary wood processing and demolition presents both a problem and a potential. If disposed in landfills, it consumes large volumes and decays, producing CH{sub 4}, CO{sub 2} and other greenhouse gases. As an energy source used in a coal fired power plant it reduces the consumption of fossil fuels reducing the greenhouse effect significantly. Additional advantages are a reduction of the ash volume and the SO{sub 2} and NO{sub x} emissions. The waste wood requires collection, storage, processing and burning. This paper describes a unique project which is carried out in the Netherlands at EPON`s Gelderland Power Plant (635 MW{sub e}) where 60 000 tonnes of waste and demolition wood will be used annually. Special emphasis is given to the processing of the powdered wood fuel. Therefore, most waste and demolition wood can be converted from an environmental liability to an environmental and economic asset. (author)

  3. Physical and mechanical properties of bio-composites from wood particles and liquefied wood resin

    Science.gov (United States)

    Hui Pan; Todd F. Shupe; Chung-Yun Hse

    2009-01-01

    Compression molded composites were made from wood particles and a liquefied wood/phenol/formaldehyde co-condensed resin. Based on our previous research, a phenol to wood (P/W) ratio of 2/1 was chosen for this study. The two experimental variables selected were: 1) liquefaction temperature (150o and 180oC) and 2) cooking method (atmospheric and sealed). Panels were...

  4. Comparative LCA of Wood from Conventional Forestry and Wood from Short Rotation Coppice

    OpenAIRE

    Kunstmann, Martin

    2014-01-01

    Worldwide there is an increasing demand of natural resources. In future, non renewable resources get substituted by renewable resources in the energetic sector as well as in the material sector. That implies a stronger usage of renewable resources especially - wood. In 2009 there was a usage of 77 million cubic meters of wood for material applications and a quantity of 55 million cubic meters for energetic applications in Germany alone. Furthermore, there is an increasing demand on wood for e...

  5. LCA-based optimization of wood utilization under special consideration of a cascading use of wood.

    Science.gov (United States)

    Höglmeier, Karin; Steubing, Bernhard; Weber-Blaschke, Gabriele; Richter, Klaus

    2015-04-01

    Cascading, the use of the same unit of a resource in multiple successional applications, is considered as a viable means to improve the efficiency of resource utilization and to decrease environmental impacts. Wood, as a regrowing but nevertheless limited and increasingly in demand resource, can be used in cascades, thereby increasing the potential efficiency per unit of wood. This study aims to assess the influence of cascading wood utilization on optimizing the overall environmental impact of wood utilization. By combining a material flow model of existing wood applications - both for materials provision and energy production - with an algebraic optimization tool, the effects of the use of wood in cascades can be modelled and quantified based on life cycle impact assessment results for all production processes. To identify the most efficient wood allocation, the effects of a potential substitution of non-wood products were taken into account in a part of the model runs. The considered environmental indicators were global warming potential, particulate matter formation, land occupation and an aggregated single score indicator. We found that optimizing either the overall global warming potential or the value of the single score indicator of the system leads to a simultaneous relative decrease of all other considered environmental impacts. The relative differences between the impacts of the model run with and without the possibility of a cascading use of wood were 7% for global warming potential and the single score indicator, despite cascading only influencing a small part of the overall system, namely wood panel production. Cascading led to savings of up to 14% of the annual primary wood supply of the study area. We conclude that cascading can improve the overall performance of a wood utilization system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Continued growth expected for wood energy despite turbulence of the economic crisis : wood energy markets, 2008-2009

    Science.gov (United States)

    Rens Hartkamp; Bengt Hillring; Warren Mabee; Olle Olsson; Kenneth Skog; Henry Spelter; Johan Vinterback; Antje Wahl

    2009-01-01

    The economic crisis has not reduced the demand for wood energy, which is expected to continue to grow. The downturn in sawmill production caused a shortage of raw material supply for wood pellet producers. With decreased demand for pulpwood-quality roundwood for wood and paper products in 2009, some pulpwood is being converted into wood energy. Economies of scale are...

  7. The economic potential of wood pellet production from alternative, low-value wood sources in the southeast of the US

    NARCIS (Netherlands)

    Hoefnagels, Ric; Junginger, Martin; Faaij, Andre

    2014-01-01

    The global demand for wood pellets used for energy purposes is growing. Therefore, increased amounts of wood pellets are produced from primary forestry products, such as pulp wood. The present analysis demonstrates that substantial amounts of alternative, low-value wood resources are available that

  8. Analysis of three-year Wisconsin temperature histories for roof systems using wood, wood-thermoplastic composite, and fiberglass shingles

    Science.gov (United States)

    Jerrold E. Winandy; Cherilyn A. Hatfield

    2007-01-01

    Temperature histories for various types of roof shingles, wood roof sheathing, rafters, and nonventilated attics were monitored in outdoor attic structures using simulated North American light-framed construction. In this paper, 3-year thermal load histories for wood-based composite roof sheathing, wood rafters, and attics under western redcedar (WRC) shingles, wood-...

  9. A ironia na literatura canadense: uma estratégia retórica e estrutural exibindo dissonâncias e diferenças = The irony in Canadian literature: a rhetorical and structural strategy displaying differences and dissonance

    Directory of Open Access Journals (Sweden)

    Klondy Lúcia de Oliveira Agra

    2012-01-01

    Full Text Available Neste artigo, observo, com base na literatura canadense, os sentidos dados à ironia utilizada como estratégia retórica e estrutural. A partir da pesquisa bibliográfica, procuro por esclarecimentos sobre a característica da ironia canadense, sua forma e seu foco específico com apoio das teorias crítica, pós-moderna e pós-colonial.In this article, the result of study about Canadian literature, I observe the use of the irony as a rhetorical and structural strategic. From the bibliographical research, I look for clarification on the characteristic of Canadian irony, its form and its specific focus with support from critical theory, postmodern and post-colonial.

  10. Common wood decay fungi found in the Caribbean Basin

    Science.gov (United States)

    D. Jean. Lodge

    2016-01-01

    There are hundreds of wood-decay fungi in the Caribbean Basin, but relatively few of these are likely to grow on manmade structures built of wood or wood-composites. The wood-decay fungi of greatest concern are those that cause brown-rot, and especially brown-rot fungi that are resistant to copper-based wood preservatives. Some fungi that grow in the Caribbean and...

  11. Application of molecular genetic methods for identification of wood-decaying fungi in wood constructions

    Directory of Open Access Journals (Sweden)

    Elena Bobeková

    2008-01-01

    Full Text Available The aim of the paper is to evaluate the utilization of molecular biology methods for detection of wood decaying fungi directly from decomposed wood using a commercial DNA extraction kit developed for soil substrates (PowerSoil™ DNA isolation kit. The experiment based on dry rot fungus (Serpula lacrymans detection from inoculated wooden pieces under laboratory conditions was followed by field detection of wood-decaying fungi from wood structures on building constructions. Fungal DNA was identified using the PCR–based methods including species-specific PCR and sequencing of amplified ITS region of ribosomal DNA.

  12. The effect of tension wood on roughness of poplar wood and its modification by steaming

    Directory of Open Access Journals (Sweden)

    اصغر طارمیان

    2016-12-01

    Full Text Available In this research, the effect of tension wood on the roughness of poplar wood in tangential and radial sections was investigated. Steaming at120 ̊C for 30 and 60 min was aslo applied to reduce the roughness. The potential use of roughness measurement technique for macroscopically detection of tension wood was one of the main objectives of this research. Before roughness measurement and for accurate sampling, the detection of tension wood was carried out using Herzberg reagent and microscopic studies. The roughness of samples was measured by stylus profilometer at 12 % moisture content and the surface quality was also studied by stereo-microscope. Results showed that there is no significant difference in the radial and tangential roughness between tension and normal wood. No difference was also observed between the roughness of tangential and radial sections of both types of woods. In contrast, stereo-microscopic studies clearly showed the higher roughness of tension wood. Steaming for 30 min increased the roughness but the treatment for 60 min had a decreasing effect on the roughness of both types of woods. Overall, it can be concluded that the roughness measurement technique cannot be used as a suitable method to nondestructively detect the poplar tension wood.

  13. Caracterização de massas argilosas contendo resíduo proveniente do setor petrolífero e sua utilização em cerâmica estrutural

    Directory of Open Access Journals (Sweden)

    Santos R. S.

    2002-01-01

    Full Text Available A região Norte do Estado do Rio de Janeiro é responsável pela produção de cerca de 75% do petróleo nacional (Bacia de Campos-RJ. Na etapa de extração/separação do óleo bruto é gerada considerável quantidade de resíduo oleoso, normalmente denominado borra de petróleo. O aproveitamento deste resíduo em massas argilosas é de alto interesse tecnológico, econômico e ambiental. O objetivo deste trabalho é caracterizar e avaliar o comportamento de massas argilosas contendo borra de petróleo visando sua aplicação em cerâmica estrutural. Foram estudadas massas com os seguintes percentuais de borra de petróleo: 0, 5, 10, 15 e 20% em peso. São apresentados os resultados das análises de difração de raios X, granulometria e limites de Atterberg, bem como a determinação de propriedades físico-mecânicas em função da temperatura de queima e percentual de borra adicionada. Os resultados revelaram que a adição do resíduo altera as características físico-química-mineralógicas e propriedades da massa argilosa pura. As massas contendo borra têm uso provável em cerâmica estrutural.

  14. Acumulação de capital, restrição externa, hiato tecnológico e mudança estrutural: teoria e experiência brasileira

    Directory of Open Access Journals (Sweden)

    Marcos Tostes Lamonica

    2012-03-01

    Full Text Available Os períodos de crescimento acelerado da economia brasileira do pós-guerra até a década de 1970 foram constrangidos pela restrição externa. Propomos neste artigo um modelo baseado em Kaldor, em que estabelecemos uma relação entre acumulação de capital, hiato tecnológico e restrição externa ao crescimento de longo prazo para economias periféricas. A hipótese básica do modelo é que a acumulação de capital, sob certas condições, pode contornar a restrição externa ao crescimento dessas economias desde que o esforço de acumulação seja capaz de produzir uma mudança estrutural no sentido de aumentar a participação relativa dos setores mais dinâmicos do ponto de vista tecnológico. Essa mudança estrutural irá resultar em um aumento gradual da elasticidade-renda das exportações e numa redução da elasticidade-renda das importações, aumentando assim a taxa de crescimento do produto real que é compatível com o equilíbrio de longo prazo do balanço de pagamentos. Ilustramos ao final do artigo que a economia brasileira do pós-guerra até os anos 1970 apresentou uma elevada taxa de acumulação de capital, aprofundando o processo de substituição de importações, o que na nossa interpretação contribuiu para parcialmente permitir relaxar a restrição externa ao crescimento de longo prazo.

  15. Influência do uso de aditivo retentor de água à base de éter de celulose nas propriedades das argamassas de assentamento em alvenaria estrutural de blocos de concreto

    Directory of Open Access Journals (Sweden)

    Alexandre Lima Oliveira

    Full Text Available O objetivo deste trabalho foi estudar a influência do uso de aditivo retentor de água à base de éter de celulose em argamassa de assentamento para alvenaria estrutural de blocos de concreto. Foi empregado um hidroxipropil-metilcelulose (HPMC em uma argamassa mista de cimento e cal, em diferentes teores (0,00%, 0,03%, 0,06% e 0,09% em relação à massa total de materiais secos para a avaliação da influência do referido aditivo nas propriedades das argamassas no estado fresco e endurecido. Além disso, foram confeccionados prismas com três blocos e miniprismas, com pedaços serrados de blocos, para avaliação da resistência à compressão, módulo de deformação e tensão de aderência. Os resultados mostraram que existe potencial para se empregarem retentores de água à base de éter de celulose para a confecção de argamassas de assentamento para alvenaria estrutural de blocos de concreto, haja vista que houve aumento da capacidade de retenção de água das argamassas e que o uso do referido produto não exerceu influência na resistência à compressão delas e na resistência à compressão dos prismas. Contudo, a resistência à compressão das juntas de assentamento, o módulo de elasticidade dos prismas e a resistência à aderência na flexão sofreram reduções significativas quando do emprego do éter de celulose.

  16. 2015 OLC Lidar DEM: Big Wood, ID

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Quantum Spatial has collected Light Detection and Ranging (LiDAR) data for the Oregon LiDAR Consortium (OLC) Big Wood 2015 study area. This study area is located in...

  17. Cleaning Up Contaminated Wood-Treating Sites

    National Research Council Canada - National Science Library

    Johnson, Peter

    1995-01-01

    n 1994 the Office of Technology Assessment (OTA) was asked to evaluate technical alternatives to incineration for cleaning up the Texarkana Wood Preserving Company Superfund site, in Texarkana, Texas...

  18. Beneficiation of Compression Debarked Wood Chips

    Science.gov (United States)

    James A. Mattson

    1974-01-01

    Presents the results of a preliminary study of secondary beneficiation of compression debarked chips to reduce residual bark to acceptable amounts. Ballmilling is a feasible method of reducing residual bark and minimizing wood loss.

  19. Plasma impregnation of wood with fire retardants

    Science.gov (United States)

    Pabeliña, Karel G.; Lumban, Carmencita O.; Ramos, Henry J.

    2012-02-01

    The efficacy of chemical and plasma treatments with phosphate and boric compounds, and nitrogen as flame retardants on wood are compared in this study. The chemical treatment involved the conventional method of spraying the solution over the wood surface at atmospheric condition and chemical vapor deposition in a vacuum chamber. The plasma treatment utilized a dielectric barrier discharge ionizing and decomposing the flame retardants into innocuous simple compounds. Wood samples are immersed in either phosphoric acid, boric acid, hydrogen or nitrogen plasmas or a plasma admixture of two or three compounds at various concentrations and impregnated by the ionized chemical reactants. Chemical changes on the wood samples were analyzed by Fourier transform infrared spectroscopy (FTIR) while the thermal changes through thermo gravimetric analysis (TGA). Plasma-treated samples exhibit superior thermal stability and fire retardant properties in terms of highest onset temperature, temperature of maximum pyrolysis, highest residual char percentage and comparably low total percentage weight loss.

  20. Wood Machining Highlights, 1972 and 1973

    Science.gov (United States)

    C.W. McMillin

    1975-01-01

    Important wood machining research published during 1972 and 1973 is highlighted to provide the reader with a concise summary of activity in 17 fields of endeavor. The review is based on 427 references and contains 154 citations.

  1. Wood durability and stability without toxicity

    Science.gov (United States)

    Roger M. Rowell; Rebecca E. Ibach; Thomas Nilsson

    2010-01-01

    Part of a sustainable future for wood products depends on extending the lifetime of wood used in adverse environments. For some products such as the daily news paper, the average life of the products is one day. For packaging, the products average life time may be as few days to a few weeks. For pallets and wooden containers, the lifetime may be several months. For...

  2. Structure and Properties Relationships of Densified Wood

    OpenAIRE

    Kultikova, Elena V.

    1999-01-01

    The objective of this research was to investigate the effect of applied compressive strain in various environments, on the strength and stiffness of compressed wood samples. It is believed that transverse compression of wood at specific conditions of temperature and moisture will result in improved mechanical properties, which can be attributed to increased density and perhaps other physical or chemical changes. Specimens of both mature and juvenile southern pine (Pinus taeda) and yell...

  3. Wood decomposition as influenced by invertebrates.

    Science.gov (United States)

    Ulyshen, Michael D

    2016-02-01

    The diversity and habitat requirements of invertebrates associated with dead wood have been the subjects of hundreds of studies in recent years but we still know very little about the ecological or economic importance of these organisms. The purpose of this review is to examine whether, how and to what extent invertebrates affect wood decomposition in terrestrial ecosystems. Three broad conclusions can be reached from the available literature. First, wood decomposition is largely driven by microbial activity but invertebrates also play a significant role in both temperate and tropical environments. Primary mechanisms include enzymatic digestion (involving both endogenous enzymes and those produced by endo- and ectosymbionts), substrate alteration (tunnelling and fragmentation), biotic interactions and nitrogen fertilization (i.e. promoting nitrogen fixation by endosymbiotic and free-living bacteria). Second, the effects of individual invertebrate taxa or functional groups can be accelerative or inhibitory but the cumulative effect of the entire community is generally to accelerate wood decomposition, at least during the early stages of the process (most studies are limited to the first 2-3 years). Although methodological differences and design limitations preclude meta-analysis, studies aimed at quantifying the contributions of invertebrates to wood decomposition commonly attribute 10-20% of wood loss to these organisms. Finally, some taxa appear to be particularly influential with respect to promoting wood decomposition. These include large wood-boring beetles (Coleoptera) and termites (Termitoidae), especially fungus-farming macrotermitines. The presence or absence of these species may be more consequential than species richness and the influence of invertebrates is likely to vary biogeographically. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

  4. Short rotation Wood Crops Program

    Energy Technology Data Exchange (ETDEWEB)

    Wright, L.L.; Ehrenshaft, A.R.

    1990-08-01

    This report synthesizes the technical progress of research projects in the Short Rotation Woody Crops Program for the year ending September 30, 1989. The primary goal of this research program, sponsored by the US Department of Energy's Biofuels and Municipal Waste Technology Division, is the development of a viable technology for producing renewable feedstocks for conversion to biofuels. One of the more significant accomplishments was the documentation that short-rotation woody crops total delivered costs could be $40/Mg or less under optimistic but attainable conditions. By taking advantage of federal subsidies such as those offered under the Conservation Reserve Program, wood energy feedstock costs could be lower. Genetic improvement studies are broadening species performance within geographic regions and under less-than-optimum site conditions. Advances in physiological research are identifying key characteristics of species productivity and response to nutrient applications. Recent developments utilizing biotechnology have achieved success in cell and tissue culture, somaclonal variation, and gene-insertion studies. Productivity gains have been realized with advanced cultural studies of spacing, coppice, and mixed-species trials. 8 figs., 20 tabs.

  5. DNA Damage among Wood Workers Assessed with the Comet Assay

    Science.gov (United States)

    Bruschweiler, Evin Danisman; Wild, Pascal; Huynh, Cong Khanh; Savova-Bianchi, Dessislava; Danuser, Brigitta; Hopf, Nancy B.

    2016-01-01

    Exposure to wood dust, a human carcinogen, is common in wood-related industries, and millions of workers are occupationally exposed to wood dust worldwide. The comet assay is a rapid, simple, and sensitive method for determining DNA damage. The objective of this study was to investigate the DNA damage associated with occupational exposure to wood dust using the comet assay (peripheral blood samples) among nonsmoking wood workers (n = 31, furniture and construction workers) and controls (n = 19). DNA damage was greater in the group exposed to composite wood products compared to the group exposed to natural woods and controls (P < 0.001). No difference in DNA damage was observed between workers exposed to natural woods and controls (P = 0.13). Duration of exposure and current dust concentrations had no effect on DNA damage. In future studies, workers’ exposures should include cumulative dust concentrations and exposures originating from the binders used in composite wood products. PMID:27398027

  6. DNA Damage among Wood Workers Assessed with the Comet Assay.

    Science.gov (United States)

    Bruschweiler, Evin Danisman; Wild, Pascal; Huynh, Cong Khanh; Savova-Bianchi, Dessislava; Danuser, Brigitta; Hopf, Nancy B

    2016-01-01

    Exposure to wood dust, a human carcinogen, is common in wood-related industries, and millions of workers are occupationally exposed to wood dust worldwide. The comet assay is a rapid, simple, and sensitive method for determining DNA damage. The objective of this study was to investigate the DNA damage associated with occupational exposure to wood dust using the comet assay (peripheral blood samples) among nonsmoking wood workers (n = 31, furniture and construction workers) and controls (n = 19). DNA damage was greater in the group exposed to composite wood products compared to the group exposed to natural woods and controls (P woods and controls (P = 0.13). Duration of exposure and current dust concentrations had no effect on DNA damage. In future studies, workers' exposures should include cumulative dust concentrations and exposures originating from the binders used in composite wood products.

  7. ROUGHNESS ON WOOD SURFACES AND ROUGHNESS MEASUREMENT METHODS

    Directory of Open Access Journals (Sweden)

    İsmail Aydın

    2003-04-01

    Full Text Available Some visual characteristics of wood such as color, pattern and texture determine the quality of manufactured products. Surface properties of wood material are important both in production and marketing after production. Initial studies related to the roughness of wood surface were begun in early 1950’s. However, no general agreed standardization can not have been developed for wood surfaces. Surface roughness of wood is function of the production process, product type and the natural anatomical properties of wood. Contact and non-contact tracing methods are used to measure of wood surface roughness. Surface roughness also affects the gluability and wettability of wood surfaces. The success in finishing also depends on the surface roughness of wood.

  8. Directory of wood-framed building deconstruction and reused wood building materials companies, 2004

    Science.gov (United States)

    Robert H. Falk; G. Bradley Guy

    2004-01-01

    This is a directory of companies involved in wood-framed building deconstruction, dismantling and reused building materials, with an emphasis on those that use, resell, and/or re-manufacture salvaged wood. Companies in this directory range in scope from those that carryout targeted building removals, such as historic barns, strictly for the purpose of harvesting the...

  9. A review of wood thermal pretreatments to improve wood composite properties

    Science.gov (United States)

    Manuel Raul Pelaez-Samaniego; Vikram Yadama; Eini Lowell; Raul. Espinoza-Herrera

    2013-01-01

    The objective of this paper is to review the published literature on improving properties of wood composites through thermal pretreatment of wood. Thermal pretreatment has been conducted in moist environments using hot water or steam at temperatures up to 180 and 230 ˚C, respectively, or in dry environments using inert gases at temperatures up to 240 ...

  10. Properties of wood-plastic composites (WPCs) reinforced with extracted and delignified wood flour

    Science.gov (United States)

    Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan

    2014-01-01

    The water sorption and mechanical properties of wood-plastic composites (WPCs) made of extracted and delignified wood flour (WF) has been investigated. WF was prepared by extraction with the solvent systems toluene/ethanol (TE), acetone/water (AW), and hot water (HW), and its delignification was conducted by means of sodium chlorite/acetic acid (AA) solution. A 2 4...

  11. An assessment of management practices of wood and wood-related wastes in the urban environment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The US Environmental Protection Agency estimates that yard waste{sup 1} accounts for approximately 16% of the municipal solid waste (MSW) stream (US EPA, 1994). Until recently, specific data and related information on this component of the (MSW) stream has been limited. The purposes of this study, phase two of the three-phase assessment of urban wood waste issues, are to assess and describe current alternatives to landfills for urban wood waste management; provide guidance on the management of urban wood waste to organizations that produce or manage wood waste; and clarify state regulatory and policy positions affecting these organizations. For this study, urban wood waste is defined as solid waste generated by tree and landscape maintenance services (public and private). Urban wood waste includes the following materials: unchipped mixed wood, unchipped logs, and unchipped tops and brush; clearing and grubbing waste; fall leaves and grass clippings; and chips and whole stumps. Construction and demolition debris and consumer-generated yard waste are not included in this study. Generators of urban wood waste include various organizations; municipal, county, and commercial tree care divisions; nurseries, orchards, and golf courses; municipal park and recreation departments; and electric and telephone utility power line maintenance, excavator and land clearance, and landscape organizations. (1) US EPA defines yard waste as ''yard trimmings'' which includes ''grass, leaves and tree brush trimmings from residential, institutional, and commercial sources.''

  12. Decay resistance of wood-plastic composites reinforced with extracted or delignified wood flour

    Science.gov (United States)

    Rebecca E. Ibach; Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Yongming Fan; Jianmin Gao

    2014-01-01

    The moisture and decay resistance of wood-plastic composites (WPCs) reinforced with extracted or delignified wood flour (WF) was investigated. Three different extractions were preformed: toluene/ethanol (TE), acetone/water (AW), and hot water (HW). Delignification (DL) was performed using a sodium chlorite/acetic acid solution. All WPCs specimens were made with 50% by...

  13. Remilling of salvaged wood siding coated with lead-based paint. Part 2, Wood product yield

    Science.gov (United States)

    John J. Janowiak; Robert H. Falk; Brian W. Beakler; Richard G. Lampo; Thomas R. Napier

    2005-01-01

    Many U.S. military buildings being targeted for removal contain large quantities of potentially reusable wood materials. In this study, we evaluated approximately 2180 m (7,152 ft) of painted Douglas-fir siding salvaged from U.S. Army barracks. Utilizing a conventional woodworking molder, we evaluated the feasibility of producing several standardized wood product...

  14. Chapter 6: Above Ground Deterioration of Wood and Wood-Based Materials

    Science.gov (United States)

    Grant Kirker; Jerrold Winandy

    2014-01-01

    Wood as a material has unique properties that make it ideal for above ground exposure in a wide range of structural and non-strucutral applications. However, no material is without limitations. Wood is a bio-polymer which is subject to degradative processes, both abiotic and biotic. This chapter is a general summary of the abiotic and biotic factors that impact service...

  15. Wood-plastic composites utilizing wood flours derived from fast- growing trees common to the midwest

    Science.gov (United States)

    There are several non- or under-utilized hardwood trees common to the Midwestern states. Wood flour (WF) derived from fast-growing Midwest trees (Osage orange, Black Locust and Red Mulberry) were evaluated as a source of bio-based fiber reinforcements. Wood plastic composites (WPC) of high density p...

  16. Long term durability of wood-plastic composites made with chemically modified wood

    Science.gov (United States)

    Rebecca E. Ibach; Craig M. Clemons

    2017-01-01

    Wood-plastic composites (WPCs) have slower moisture sorption than solid wood, but over time moisture can impact the strength, stiffness, and decay of the composite. These changes will become increasingly important if WPCs are used in more challenging environments such as in ground-contact applications. There are several options for mitigating the moisture sorption of...

  17. Acoustic emission and acousto-ultrasonic techniques for wood and wood-based composites: a review

    Science.gov (United States)

    Sumire Kawamoto; R. Sam Williams

    2002-01-01

    This review focuses on the feasibility of acoustic emission (AE) and acousto-ultrasonic (AU) techniques for monitoring defects in wood, particularly during drying. The advantages and disadvantages of AE and AU techniques are described. Particular emphasis is placed on the propagation and attenuation of ultrasonic waves in wood and the associated measurement problems....

  18. Extraction of chromium, copper, and arsenic from CCA-treated wood by using wood vinegar.

    Science.gov (United States)

    Choi, Yong-Seok; Ahn, Byoung Jun; Kim, Gyu-Hyeok

    2012-09-01

    In the present study, wood vinegar was used to extract chromium, copper, and arsenic from chromated copper arsenate (CCA)-treated wood. The extraction efficiency for CCA elements was evaluated using various concentrations of wood vinegar, extraction temperatures, and extraction periods. The extraction efficiency for CCA elements increased with increasing the concentration of wood vinegar and the extraction conditions, resulting in maximal removal rate of copper (95.7%), followed by arsenic (92.7%) and chromium (86.3%). Since wood vinegar afforded high levels of copper extraction, its use was extended to copper-based preservative-treated wood, wherein significant extraction of copper up to 97.6% and 95.7% was obtained from alkaline copper quats (ACQ)- and copper azole (CuAz)-treated sawdust, respectively. To the best of our knowledge, this is the first study on the application of wood vinegar for the extraction of metal elements from CCA-treated wood. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. Wood-anatomy and relationship. Taxonomic Notes in connection with the Key to the Javanese Woods

    NARCIS (Netherlands)

    Janssonius, H.H.

    1950-01-01

    During the long years I was engaged in writing my “Mikrographie” (1), my main purpose was to give a survey of the wood-anatomy of as many representatives of the javanesc wood flora as I could lay hands on, in connection with Koorders’ and Valeton’s “Bijdragen” (2). My attention being almost

  20. Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene

    Science.gov (United States)

    Alex Wiedenhoeft

    2006-01-01

    Wood can be found at crime scenes in many forms: as a murder weapon, as material used to hide a body, or as trace evidence from forced entry or vandalism. In the course of my work at the Forest Products Laboratory, Center for Wood Anatomy Research, I have been part of several forensic investigations that were adversely affected by inappropriate procedures used to...

  1. Exposure to wood dust and endotoxin in small-scale wood industries in Tanzania.

    NARCIS (Netherlands)

    Rongo, L.M.B.; Msamanga, G.I.; Burstyn, I.; Barten, F.J.M.H.; Dolmans, W.M.V.; Heederik, D.

    2004-01-01

    Workers in small-scale wood industries (SSWI) have increased risks of developing asthma and other respiratory diseases. Wood dust and microbial agents have both been suggested to play a role, but few studies have measured endotoxin exposure in SSWI in Africa. We assessed inhalable dust levels in 281

  2. Climate effects of wood used for bioenergy

    Energy Technology Data Exchange (ETDEWEB)

    Ros, Jan P.M.; Van Minnen, Jelle G. [Netherlands Environmental Assessment Agency PBL, Bilthoven (Netherlands); Arets, Eric J.M.M. [Alterra, Wageningen University WUR, Wageningen (Netherlands)

    2013-08-15

    Wood growth and natural decay both take time, and this is an important aspect of sustainability assessments of wood used for energy. Wood taken from forests is a carbon-neutral energy source in the long term, but there are many examples of potential sources of wood used for bioenergy for which net emission reductions are not achieved in 10 to 40 years - the time frame for most climate policy mitigation targets. This is caused by two factors. The first factor relates to the fact that the carbon cycles of wood have a long time span. After final felling, CO2 fixation rates are initially relatively low, but increase again as forests regrow. This regrowth takes many years, sometimes more than a century. Wood residues can either be used or left in the forest. By using them, the emissions from the otherwise decaying residues (taking 2 to 30 years) would be avoided. The second factor concerns the fact that, if the wood is used for bioenergy, then fossil energy emissions are being avoided. However, the direct emission levels from bioenergy are higher than those related to the fossil energy it replaces. These additional emissions also have to be compensated. The carbon debt caused by both factors has to be paid back first, before actual emission reductions can be realised. For wood residues (from harvesting or thinning) that are used to replace coal or oil products, these payback times are relatively short, of the order of 5 to 25 years, mainly depending on location and type of residue (longer if they replace gas). This is also the case when using wood from salvage logging. In most cases, when using wood from final felling directly for energy production, payback times could be many decades to more than a century, with substantial increases in net CO2 emissions, in the meantime. This is especially the case for many forests in Europe, because they are currently an effective carbon sink. Additional felling reduces average growth rates in these forests and thus the sequestration

  3. Wood biomass potentials in Brandenburg - growing competition between industry timber and energy wood

    Energy Technology Data Exchange (ETDEWEB)

    Sasse, D. (CEBra - Centre for Energy Technology Brandenburg GmbH, Cottbus (Germany)); Laufer, S. (University of Applied Sciences Eberswalde (Germany))

    2007-07-01

    The paper presents a survey of dramatic timber market developments in recent years. It shows the significant increase of wood processing capacities in Brandenburg and neighbouring regions and the expansion of the wood energy branch at the same time which fostered a growing competition between the industrial and energetic use of wood. The comparison between the annual timber consumption and the annual timber yield potential in Brandenburg forests reflects a widening gap which cannot be covered by conventional means of forestry management. This gap amounted to 1 million m3 in 2006 and will probably double in 2007. Rapidly growing is the importance of wood from short rotation coppices on agricultural set-aside fields and former open cast mining areas. The development of alternative land use systems for the sustainable production of energy wood is a main focus of several R and D projects in Brandenburg. (orig.)

  4. Temperature effects on wood anatomy, wood density, photosynthesis and biomass partitioning of Eucalyptus grandis seedlings.

    Science.gov (United States)

    Thomas, D S; Montagu, K D; Conroy, J P

    2007-02-01

    Wood density, a gross measure of wood mass relative to wood volume, is important in our understanding of stem volume growth, carbon sequestration and leaf water supply. Disproportionate changes in the ratio of wood mass to volume may occur at the level of the whole stem or the individual cell. In general, there is a positive relationship between temperature and wood density of eucalypts, although this relationship has broken down in recent years with wood density decreasing as global temperatures have risen. To determine the anatomical causes of the effects of temperature on wood density, Eucalyptus grandis W. Hill ex Maiden seedlings were grown in controlled-environment cabinets at constant temperatures from 10 to 35 degrees C. The 20% increase in wood density of E. grandis seedlings grown at the higher temperatures was variously related to a 40% reduction in lumen area of xylem vessels, a 10% reduction in the lumen area of fiber cells and a 10% increase in fiber cell wall thickness. The changes in cell wall characteristics could be considered analogous to changes in carbon supply. Lumen area of fiber cells declined because of reduced fiber cell expansion and increased fiber cell wall thickening. Fiber cell wall thickness was positively related to canopy CO2 assimilation rate (Ac), which increased 26-fold because of a 24-fold increase in leaf area and a doubling in leaf CO2 assimilation rate from minima at 10 and 35 degrees C to maxima at 25 and 30 degrees C. Increased Ac increased seedling volume, biomass and wood density; but increased wood density was also related to a shift in partitioning of seedling biomass from roots to stems as temperature increased.

  5. [Application of near infrared spectroscopy in analysis of wood properties].

    Science.gov (United States)

    Yao, Sheng; Pu, Jun-wen

    2009-04-01

    There is substantial interest in the improvement of wood properties through genetic selection or a change in silviculture prescription. Tree breeding purpose requires measurement of a large number of samples. However, traditional methods of assessing wood properties are both time consuming and destructive, limiting the numbers of samples that can be processed, so new method would be needed to find. Near infrared spectroscopy (NIR) is an advanced spectroscopic tool for nondestructive evaluation of wood and it can quickly, accurately estimate the properties of increment core, solid wood or wood meal. The present paper reviews the advances in the research on the wood chemistry properties and anatomical properties using NIR.

  6. Judicialização da Política e Politização do Direito: Acoplamento Estrutural entre os Sistemas Jurídico e Político sem a Construção de uma Racionalidade Transversal

    Directory of Open Access Journals (Sweden)

    Isabella Karla Lima dos Santos

    2016-11-01

    Full Text Available Este artigo procura demonstrar a relação entre o Sistema Político e o Sistema Jurídico, através do acoplamento estrutural feito pela Constituição. Nosso objetivo é analisar os casos em que esse acoplamento estrutural não corresponde a uma racionalidade transversal, por não haver o aprendizado de um sistema com o outro e, sim, a interferência negativa entre eles, ocorrendo a Judicialização da Política ou a Politização do Direito. Para isso, o marco teórico escolhido foi a obra “Transconstitucionalismo” de Marcelo Neves.

  7. Visual associative learning in wood ants.

    Science.gov (United States)

    Fernandes, A Sofia D; Buckley, Christopher L; Niven, Jeremy E

    2018-02-07

    Wood ants are a model system for studying visual learning and navigation. They can forage for food and navigate to their nests effectively by forming memories of visual features in their surrounding environment. Previous studies of freely behaving ants have revealed many of the behavioural strategies and environmental features necessary for successful navigation. However, little is known about the exact visual properties of the environment that animals learn or the neural mechanisms that allow them to achieve this. As a first step towards addressing this, we developed a classical conditioning paradigm for visual learning in harnessed wood ants that allows us to control precisely the learned visual cues. In this paradigm, ants are fixed and presented with a visual cue paired with an appetitive sugar reward. Using this paradigm, we found that visual cues learnt by wood ants through Pavlovian conditioning are retained for at least 1 h. Furthermore, we found that memory retention is dependent upon the ants' performance during training. Our study provides the first evidence that wood ants can form visual associative memories when restrained. This classical conditioning paradigm has the potential to permit detailed analysis of the dynamics of memory formation and retention, and the neural basis of learning in wood ants. © 2018. Published by The Company of Biologists Ltd.

  8. General Regularities of Wood Surface Roughness

    Directory of Open Access Journals (Sweden)

    MAGOSS, Endre

    2008-01-01

    Full Text Available The surface roughness of wood products is depending on many factors related both towood properties and wood working operational parameters. Probably this is the reason why there areno generally valid correlation determining surface roughness parameters as a function of influencingfactors. In particular, the account of wood structure in the surface roughness interpretation proved tobe difficult.In the last years an important progress was made in recognizing the role of the anatomicalstructure of wood species in the attainable surface roughness. The introduction of a structure numbermade it possible to express and characterize the different wood species numerically.The aim of these studies was the separation of roughness components due to the anatomicalstructure and the woodworking operation. Using a special finishing technique, the roughnesscomponent due to woodworking operations was not significant and could be separated. The samespecimens were also subjected to different woodworking operations using cutting velocities between10 and 50 m/s. The processing of experimental data resulted in a chart showing the minimumroughness component due to different woodworking operations. Special experimental investigationwas conducted to clear the influence of edge dullness on the surface roughness, especially on itsAbbott-parameters. The measurements showed that the Rk-parameter is a good indicator to predictedge dullness.

  9. Gasification research on wood grow project

    Energy Technology Data Exchange (ETDEWEB)

    Flanigan, V J

    1981-01-09

    The GROW (Gasification Research on Wood) project consists of a research project on thermochemical degradation of wood particles (sawdust or hammermilled wood) on a pilot plant scale and utilizes a 100 cm (40 in.) diameter fluidized sand bed reactor at capacities of up to 1000 Kg/Hr (2200 lb/hr). Supplementary facilities include wood preparation and air conveying, a wood feed bin, feed and transfer screws, an air compressor with storage and filter tanks, an electrical preheater, a propane-fired preheater, a cyclone separator removing solids from product gas, a water scrubber to cool and clean product gas, a scrubber wate settling tank, a scrubber water cooler, a knockout drum, a demister to be installed in the future, a recycle compressor for recirculation, a recycle gas storage tank, a flare and stack with air blower to dispose of the gas, 2 CO/sub 2/ stripper columns to be installed in the future to remove CO/sub 2/ by caustic adsorption, caustic tanks, and the necessary piping, pumps, sampling, and measurement facilities. A brief report of progress on the project is given, followed by the safety implementation plan and operating, maintenance, and safety procedures. (MHR)

  10. Characterization of wood mulch and leachate/runoff from three wood recycling facilities.

    Science.gov (United States)

    Kannepalli, Sarat; Strom, Peter F; Krogmann, Uta; Subroy, Vandana; Giménez, Daniel; Miskewitz, Robert

    2016-11-01

    Large-scale open storage of wood mulch is common practice at wood recycling facilities. During rain and snow melt, leachate with soluble compounds and suspended particles is released from mulch stockpiles. The objective of this study was to determine the quality of leachate/runoff from wood recycling facilities to evaluate its potential to contaminate receiving waterbodies. Wood mulch (n = 30) and leachate/runoff (n = 26) samples were collected over 1.5 years from three wood recycling facilities in New Jersey, USA. Differences by site were found (p recycling facilities should not be released to surface waters as it is a potential source of organic contamination and low levels of nutrients. A study in which runoff from a controlled drainage area containing wood mulch of known properties is monitored would allow for better assessment of the potential impact of stormwater runoff from wood recycling facilities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Genetic improvement of trees for wood production, with particular refeference to wood traits

    Directory of Open Access Journals (Sweden)

    Nocetti M

    2008-03-01

    Full Text Available The use of selected propagation material from tree improvement programs is expected to lead to a more homogenous product, generally appreciated by industry. So far, breeding strategy have been mainly targeted to maximize acclimation/adaptation to specific environment conditions, tree growth and disease resistance, but it is not obvious that such strategy might lead to improvement of wood characteristics at the same time. Therefore, it seems important to introduce wood traits improvement as specific target of the selection process in tree breeding programs, and/or to assess heritability of wood technological properties of trees previously selected based on different criteria. Investigations reported so far have revealed that several wood traits are under a medium to high genetic control. The main goal of this work is to discuss the suitability of wood traits improvement as main target of specific breeding programs, with particular attention to wood technological characteristics to be considered in the tree selection process. Finally, we focused on noble hardwoods, that have been the target species for many improvement programs developed in Italy, and particularly on wild cherry, where studies on the genetic control of wood traits are rare.

  12. Novel perspectives in wood certification and forensics: dry wood as a source of DNA.

    Science.gov (United States)

    Deguilloux, Marie-France; Pemonge, Marie-Hélène; Petit, Rémy J

    2002-05-22

    The importance of wood for human societies can hardly be understated. If dry wood were amenable to molecular genetic investigations, this could lead to major applications in wood forensics, certification, archaeology and palaeobotany. To evaluate the potential of wood for molecular genetic investigations, we have attempted to isolate and amplify, by PCR, DNA fragments of increasing size corresponding to all three plant genomes from different regions of 10 oak logs. Stringent procedures to avoid contamination with external DNA were used in order to demonstrate the authenticity of the fragments amplified. This authenticity was further confirmed by demonstrating genetic uniformity within each log using both nuclear and chloroplast microsatellites. For most wood samples DNA was degraded, and the sequences that gave the best results were those of small size and present in high copy number (chloroplast, mitochondrial, or repeated nuclear sequences). Both storage conditions and storage duration play a role in DNA conservation. Overall, this work demonstrates that molecular markers from all three plant genomes can be used for genetic analysis on dry oak wood, but outlines some limitations and the need for further evaluation of the potential of wood for DNA analysis.

  13. Wood flow problems in the Swedish forestry

    Energy Technology Data Exchange (ETDEWEB)

    Carlsson, Dick [Forestry Research Inst. of Sweden, Uppsala (Sweden); Roennqvist, M. [Linkoeping Univ. (Sweden). Dept. of Mathematics

    1998-12-31

    In this paper we give an overview of the wood-flow in Sweden including a description of organization and planning. Based on that, we will describe a number of applications or problem areas in the wood-flow chain that are currently considered by the Swedish forest companies to be important and potential in order to improve overall operations. We have focused on applications which are short term planning or operative planning. We do not give any final results as much of the development is currently ongoing or is still in a planning phase. Instead we describe what kind of models and decision support systems that could be applied in order to improve co-operation within and integration of the wood-flow chain 13 refs, 20 figs, 1 tab

  14. Surefire wood fuel harvester development project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The development of a prototype mobile wood fuel chipping machine, the Surefire Woodfuel Harvester, is described. The machine, which has been developed with support from the Department of Trade and Industry (DTI) and EAGGF, was designed to enable potential woodland supplies in East Anglia to be utilised as a source of biomass electricity generation. The machine has a high speed on/off rolling chassis, hydrostatic transmission for field use, a chipper with at least 30 mm capacity with sliver reduction measures, a crane to feed chipper, a felling-head /grapple fitted to the crane, a high-performance hydraulic system and a wrench for skidding inaccessible timber to within the crane's reach. The developing wood fuel market in the UK, major wood fuel sources in East Anglia, the project's objectives, forward planning, machine specification, design work, machine construction, testing and operation (a case study from Hall Farm, Garboldisham) are described.

  15. The Amer demolition wood gasification project

    Energy Technology Data Exchange (ETDEWEB)

    Willeboer, W. [NV EPZ, Eindhoven (Netherlands)

    1998-12-01

    A project is described in which low quality demolition wood, which cannot be recycled to the chip board industry, is gasified. The product gas is cooled, dedusted, washed and subsequently burnt in the boiler of the coal fired co-generation unit Amer 9. This unit has a net production capacity of 600 MWe and 350 MWe heat. The unit has stringent emission limits for SO{sub 2} and NO{sub x} and produces a certified fly ash. This means that it is very important to avoid any negative effects of the wood gas on emissions and rest products of the unit. Based upon the above starting points and boundary conditions, the project has been specified with the following key figures: waste wood input 150,000 t/a; coal input saving of 70,000 t/a; CO{sub 2} emission reduction of 170,000 t/a; and electric efficiency over 35%.

  16. Brazilian Market Structure of Wood Briquettes

    Energy Technology Data Exchange (ETDEWEB)

    Gentil, L.V. (Univ. of Brasilia, Forest Dept, Brasilia (Brazil)). E-mail: gentil22@unb.br; Vieira, A.M.C. (Univ. of Brasilia, Dept. of Statistics, Brasilia (Brazil))

    2008-10-15

    The bioenergy market and wood briquette market grew starting from the oil crisis in 1973, when it began the fossil fuels replacement. Lignocellulosic wastes have larger specific calorific power and quality than agricultural, peat and sugar cane bagasse. Knowledge of the briquette market with larger efficient scientific tools and smaller costs, is as important in this work as using improved SWOT Analysis of research market with a Multiple Mode and a Correspondence Analysis Mode. The results of this research show that the supply strengths are the quality and amount of energy from wood briquette. The supply weaknesses are expensive freight and briquette vulnerability to the moisture. The demand opportunities are the many uses of wood briquette in several market segments. The demand threats are the absence of a good distribution and expensive freight for the delivery

  17. Juniper wood structure under the microscope.

    Science.gov (United States)

    Bogolitsyn, Konstantin G; Zubov, Ivan N; Gusakova, Maria A; Chukhchin, Dmitry G; Krasikova, Anna A

    2015-05-01

    The investigations confirm the physicochemical nature of the structure and self-assembly of wood substance and endorse its application in plant species. The characteristic morphological features, ultra-microstructure, and submolecular structure of coniferous wood matrix using junipers as the representative tree were investigated by scanning electron (SEM) and atomic-force microscopy (AFM). Novel results on the specific composition and cell wall structure features of the common juniper (Juniperus Communis L.) were obtained. These data confirm the possibility of considering the wood substance as a nanobiocomposite. The cellulose nanofibrils (20-50 nm) and globular-shaped lignin-carbohydrate structures (diameter of 5-60 nm) form the base of such a nanobiocomposite.

  18. Structural changes in wood during ozonation

    Science.gov (United States)

    Ben'ko, E. M.; Manisova, O. R.; Murav'eva, G. P.; Lunin, V. V.

    2013-07-01

    It is found that ozone treatment of aspen wood leads to changes in its structural characteristics, i.e., its specific surface area and the crystallinity index of cellulose. Using optical microscopy, it is shown that ozonation is accompanied by a decrease in the average size and visible surface of wood particles. The values for the specific area of the outer surface of samples are calculated. The specific surface area available to the enzyme molecules is determined from data on the adsorption of inert protein hemoglobin on wood. It is shown that this value is an order of magnitude higher than that of the outer surface and increases considerably for an ozonized sample. Based on the results from X-ray analysis, it is established that the structure of cellulose is disordered during ozone delignification, as is indicated by a reduction in the crystallinity index and crystallite sizes.

  19. Method of predicting mechanical properties of decayed wood

    Science.gov (United States)

    Kelley, Stephen S.

    2003-07-15

    A method for determining the mechanical properties of decayed wood that has been exposed to wood decay microorganisms, comprising: a) illuminating a surface of decayed wood that has been exposed to wood decay microorganisms with wavelengths from visible and near infrared (VIS-NIR) spectra; b) analyzing the surface of the decayed wood using a spectrometric method, the method generating a first spectral data of wavelengths in VIS-NIR spectra region; and c) using a multivariate analysis to predict mechanical properties of decayed wood by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data of wavelengths in VIS-NIR spectra obtained from a reference decay wood, the second spectral data being correlated with a known mechanical property analytical result obtained from the reference decayed wood.

  20. Before you install exterior wood-based siding

    Science.gov (United States)

    Mark T. Knaebe

    1995-01-01

    Moisture accumulation and extreme fluctuations in moisture levels can adversely affect the service life of components, such as wood siding and windows. Adverse moisture conditions can induce checking, warping, paint failure, and in severe cases, rotting of the wood.

  1. USE OF CANDEIA’S (Eremanthus erythropappus WASTE WOOD

    Directory of Open Access Journals (Sweden)

    Rosimeire Cavalcante dos Santos

    2008-09-01

    Full Text Available The candeia (Eremanthus erythropappus is a native forest species with multiple uses and specially utilized as essential oils source. The use of the candeia´s waste wood after oil extraction for particle panels production becomes a viable alternative, avoiding environmental problems and increasing the availability of these products in the consuming market. This work verified the viability of producing wood-cement panels using waste wood generated after the extraction of candeia’s oil, in association with pinus and eucalipto woods. The experiment was installed according to a completely randomized design with three repetitions. The treatments were arranged according to a factorial 2 x 3 scheme (two wooden species and three replacement percentages of the woods by candeia’s waste. The results of the physical and mechanical property tests showed high potentiality of candeia waste wood, after oil extraction, in association with pinus and eucalipto wood for manufacturing wood-cement panels.

  2. A Survey of Wood Protection Chemicals, Tree Killers and Sprayers ...

    African Journals Online (AJOL)

    chemicals used in wood protection (preservation) within Makurdi metropolis. A purposive, non-random sampling was undertaken in Makurdi metropolis to identify wood protection chemicals/tree-killers available in agrochemical stores, ...

  3. Fatigue testing of wood-concrete composite beams.

    Science.gov (United States)

    2013-05-01

    Currently, wood-concrete composite structural members are usually applied in building structures. There are a relatively small number (in the low 100s) of known bridge applications involving wood-concrete composites. A problem with using these novel ...

  4. The Statistics of wood assays for preservative retention

    Science.gov (United States)

    Patricia K. Lebow; Scott W. Conklin

    2011-01-01

    This paper covers general statistical concepts that apply to interpreting wood assay retention values. In particular, since wood assays are typically obtained from a single composited sample, the statistical aspects, including advantages and disadvantages, of simple compositing are covered.

  5. Micromechanical modelling of mechanical behaviour and strength of wood

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon; Qing, Hai

    2008-01-01

    An overview of the micromechanical theoretical and numerical models of wood is presented. Different methods of analysis of the effects of wood microstructures at different scale levels on the mechanical behaviour, deformation and strength of wood are discussed and compared. Micromechanical models...... of deformation and strength of wood are divided into three groups: cellular models (applied most often to the mesoscale or cell scale analysis of the wood deformation), continuum micromechanics and homogenization based methods, models which consider wood as a composite and are applied mainly to the analysis...... of wood at the microscale (cell wall scale) level and multiscale models. Lattice and composite models, which are used to analyze the damage and fracture of wood, are considered in a separate section. The areas of applicability and strong sides of each approach are discussed. (C) 2008 Elsevier B.V. All...

  6. Relationships within balsaminoid Ericales: a wood anatomical approach

    NARCIS (Netherlands)

    Lens, F.; Dressler, S.; Jansen, S.; Van Evelghem, L.; Smets, E.

    2005-01-01

    Wood samples of 49 specimens representing 31 species and 11 genera of woody balsaminoids, i.e., Balsaminaceae, Marcgraviaceae, Pellicieraceae, and Tetrameristaceae, were investigated using light microscopy and scanning electron microscopy. The wood structure of Marcgraviaceae, Pellicieraceae, and

  7. 214 VARIATIONS IN THE FIBRE LENGTH OF RUBBER WOOD ...

    African Journals Online (AJOL)

    2010-09-02

    . Nigerian grown rubber in south eastern state of Abia, so as to relate the wood quality with a range of industrial usefulness of the species and the possibility of controlling the wood fibre features silviculturally and genetically.

  8. Lung function: occupational exposure to wood dust

    Directory of Open Access Journals (Sweden)

    Baran S

    2009-12-01

    Full Text Available Abstract Objectives Occupational exposure to wood dust has been shown to cause several respiratory disorders, such as allergic rhinitis, chronic bronchitis, asthma, sino-nasal adenocarcinoma, and impairment of lung function. The aim of the study was to estimate lung function (in the woodworking industry among workers employed by wood processing, who run the risk of being expose to wood dust. Methods The study concerns a group of 70 workers aged 24-55. All the workers underwent general and laryngological examination. A group of 20 workers, working at the positions where dustiness exceeded TLV (threshold limit value took X-ray of the chest and spirometry. The following parameters were measured: VC, IC, ERV, TV, BF, FEV1, FVC, PEF, MEF25-75, FEV1%FVC, FEV1%VC. The data are presented as means ± SD and the authors applied references values according to ERS guidelines. Results The results show that there was no decline in FEV1 (3.7 ± 0.7 and FVC (4.5 ± 0.8. Normal lung function was defined as FEV1/VC ratio ≥0.7. None of the tested workers had obstructive pattern in spirometry. The mean FEV1%VC was 77.1 ± 10.2. These results suggest that wood dust exposure might not lead to significant pulmonary damage. Conclusions These data do not corroborate that wood dust plays significant role in lung function impairment. Future studies of respiratory health among workers exposed to wood dust are needed.

  9. Synthesis and cure kinetics of liquefied wood/phenol/formaldehyde resins

    Science.gov (United States)

    Hui Pan; Todd F. Shupe; Chung-Yun Hse

    2008-01-01

    Wood liquefaction was conducted at a 2/1 phenol/wood ratio in two different reactors: (1) an atmospheric three-necked flask reactor and (2) a sealed Parr reactor. The liquefied wood mixture (liquefied wood, unreacted phenol, and wood residue) was further condensed with formaldehyde under acidic conditions to synthesize two novolac-type liquefied wood/phenol/...

  10. Energy wood resources in Northwest Russia and international trade of wood fuels

    Energy Technology Data Exchange (ETDEWEB)

    Karjalainen, T.; Gerasimov, Y. (Finnish Forest Research Inst., Joensuu (Finland)), e-mail: timo.karjalainen@metla.fi, e-mail: yuri.gerasimov@metla.fi; Kholodkov, V. (Biocenter, Leningrad (Russian Federation), Lisino Forestry College), e-mail: rusbiocenter@gmail.com

    2010-07-01

    Bioenergy sector is not yet well developed in Russia, but there are signs that development is about to begin. There are good basis for the development: there is plenty of wood available for energy production, and central heating network, which requires reconstruction and modernisation. Regional bioenergy programmes support utilisation of local renewable energy sources, which is energy wood in most of the cases.This paper provides brief information about the energy supply and use, energy wood resources and their use, and about pellet production and use in particular in Northwest Russia. (orig.)

  11. International Trade of Wood Pellets (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2013-05-01

    The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

  12. Resistance to Crack Propagation of Algerian Wood

    Directory of Open Access Journals (Sweden)

    Abdelhakim DAOUI

    2011-12-01

    Full Text Available Wood is the most building materials widely used since prehistory for the construction of houses, tools, weapons. Accidents occurring during the use of materials caused by different defaults, as: knots, resin pockets, cracks. These various defaults and others are the starting point of the principle of crack mechanics. Our present work focuses on determining the resistance to crack propagation of three types of Algerians wood, (Aleppo pine, eucalyptus and oak, by calculating the energy release rate G (mode I. The estimation of factor G allows the possibility of fracture propagation.

  13. NeighbourWoods - Med skoven som nabo

    DEFF Research Database (Denmark)

    Konijnendijk, Cecil Cornelis; Schipperijn, Jasper Jan; Petersen, Karen Sejr

    NeighbourWoods er skove lige i nærheden, der er en integreret del af lokalsamfundet. Hæftet formidlter europæiske erfaringer med etablering af naboskove. Målet med hæftet er at bidrage til etableringen af flere naboskove.......NeighbourWoods er skove lige i nærheden, der er en integreret del af lokalsamfundet. Hæftet formidlter europæiske erfaringer med etablering af naboskove. Målet med hæftet er at bidrage til etableringen af flere naboskove....

  14. Overview of the wood adhesives industry in China

    Science.gov (United States)

    Chung-Yun. Hse

    1999-01-01

    Adhesives products and demand for them in China are discussed in this paper, with special emphasis on wood adhesives products in this decade. In 1994, the wood industries in China con­sumed more than 330,000 tons of adhesives. The estimated demand for wood adhesives will be more than 560,000 tons in the year 2000. The main wood adhesive used is urea-formaldehyde resin...

  15. Analysis of China's primary wood products market - sawnwood and plywood

    OpenAIRE

    Wan, Minli

    2009-01-01

    China's primary wood processing industry and wood consuming sectors have experienced rapid growth in recent years. Industries like sawnwood and plywood have developed very quickly. The purpose of this study is to: 1) provide an overview of the demand, supply, imports and exports of raw wood and primary wood products in the China market between 1993 and 2007, 2) present quantitative estimates of the relative importance of factors influencing the demand, supply and exports of Chinese plywood, 3...

  16. Genetics of wood quality attributes in Western Larch

    OpenAIRE

    Ratcliffe, Blaise; Hart, Foster J.; Klápště, Jaroslav; Jaquish, Barry; Mansfield, Shawn D.; El-Kassaby, Yousry A.

    2014-01-01

    International audience; & Context Wood quality traits are important to balance the negative decline of wood quality associated with selection for growth attributes in gymnosperm breeding programs. Obtaining wood quality estimates quickly is crucial for suc-cessful incorporation in breeding programs. & Aims The aims of this paper are to: (1) Estimate genetic and phenotypic correlations between growth and wood quality attributes, (2) Estimate heritability of the studied traits, and (3) Assess t...

  17. Wood and Wood-Based Materials as Sensors—A Review of the Piezoelectric Effect in Wood

    Science.gov (United States)

    Robert J. Ross; Jiangming Kan; Xiping Wang; Julie Blankenburg; Janet I. Stockhausen; Roy F. Pellerin

    2012-01-01

    A variety of techniques have been investigated for use in assessing the physical and mechanical properties of wood products and structures. Ultrasound, transverse vibration, and stress-wave based methods are all techniques that have shown promise for many nondestructive evaluation applications. These techniques and others rely on the use of measurement systems to...

  18. The biodiversity and biotic integration in the oak-wood of middle Russian partially wooded steppe districts

    Directory of Open Access Journals (Sweden)

    V. I. Reutskaya

    2009-01-01

    Full Text Available In this article there are givin the problems of biotic integration in the oak-wood of partially wooded steppe destrikts. There was studying the vitality dependens of oaks from their composition diversity.

  19. Environmental Degradation of Fiber-Reinforced Polymer Fasteners in Wood

    Science.gov (United States)

    Samuel L. Zelinka; Douglas R. Rammer

    2013-01-01

    This paper examines the durability of fiber-reinforced polymer (FRP) nails in treated wood. The FRP nails were exposed to four conditions: (1) accelerated weathering, consisting of exposure to ultraviolet light and condensation; (2) 100% relative humidity (RH); (3) being driven into untreated wood and exposed to 100% RH; and (4) being driven into wood treated with...

  20. Influence of wood defects on some mechanical properties of two ...

    African Journals Online (AJOL)

    Effects of slope of wood grain, knot, split, ingrowth and sapwood on some mechanical wood properties of Pterygota macrocarpa (Kyere) and Piptadeniastrum africanum (Dahoma) have been studied, using structural size specimens and a 60 tonne structural wood testing machine. The study on the two tropical hardwoods ...

  1. Climate and growth influences on wood formation and utilisation ...

    African Journals Online (AJOL)

    Therefore, it is not surprising that the variation in wood properties within a stem is large and that in seasonal climates, the greatest variation is typically found within an annual ring. A great advantage for the study of wood is that the net product of seasonal processes is recorded in the wood structure of the annual ring.

  2. Direct current testing to measure corrosiveness of wood preservatives

    Science.gov (United States)

    Samuel L. Zelinka; Douglas R. Rammer; Donald S. Stone; James T. Gilbertson

    2007-01-01

    A qualitative test that mimics the corrosion behaviour of metals in contact with treated wood without using wood specimens would be of great value in rapidly evaluating the corrosiveness of new wood preservatives. The objective of this study was to determine whether the linear polarisation resistance of metals immersed in a solution of preservative chemicals is related...

  3. Flavanoid biocides: Wood preservatives based on condensed tannins

    Science.gov (United States)

    Peter Laks; Peggy A. McKaig; Richard W. Hemingway

    1988-01-01

    The condensed tannins are natural wood preservatives found in high concentrations in the bark and wood of some tree species. Condensed tannin-containing bark extracts from loblolly pine (Pinus taeda) were evaluated as wood preservatives using standard methods. Bark extracts by themselves did not cause any reduction in weight loss of pressure-treated...

  4. Mechanism of Transport Through Wood Cell Wall Polymers

    Science.gov (United States)

    Joseph E. Jakes; Nayomi Plaza; Donald S. Stone; Christopher G. Hunt; Samuel V. Glass; Samuel L. Zelinka

    2013-01-01

    The movement of chemicals through wood is necessary for decay and fastener corrosion to occur in forest products. However, the mechanism responsible for the onset of fastener corrosion and decay in wood is not known. The onset occurs before the formation of free water in wood cavities and aqueous chemical transport would be possible. Here, we propose that the onset...

  5. Toxic hazard and chemical analysis of leachates from furfurylated wood

    NARCIS (Netherlands)

    Pilgard, A.; Treu, A.; Zeeland, van A.N.T.; Gosselink, R.J.A.; Westin, M.

    2010-01-01

    The furfurylation process is an extensively investigated wood modification process. Furfuryl alcohol molecules penetrate into the wood cell wall and polymerize in situ. This results in a permanent swelling of the wood cell walls. It is unclear whether or not chemical bonds exist between the furfuryl

  6. 7 CFR 160.8 - Steam distilled wood turpentine.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Steam distilled wood turpentine. 160.8 Section 160.8... STANDARDS FOR NAVAL STORES General § 160.8 Steam distilled wood turpentine. The designation “steam distilled wood turpentine” shall refer to the kind of spirits of turpentine obtained by steam distillation from...

  7. Flexural properties of wood cement board fabricated from cropping ...

    African Journals Online (AJOL)

    The study was undertaken to investigate the possibilities of producing cement bonded particle boards from wood wastes generated from 3 urban wood species in University of Ibadan with a view to evaluating the bending properties of cement boards so produced. The materials used for the boards' fabrication were wood ...

  8. Global Wood Pellet Industry and Trade Study 2017

    NARCIS (Netherlands)

    Thrän, D.; Peetz, D.; Schaubach, K.; Mai-Moulin, T.|info:eu-repo/dai/nl/412461021; Junginger, H.M.|info:eu-repo/dai/nl/202130703; Lamers, P.; Visser, L.|info:eu-repo/dai/nl/413534839

    2017-01-01

    The report Global Wood Pellet Industry Market published in 2011 has always been the most downloaded document of IEA Bioenergy Task 40. We have decided to update the report and bring new insights on market trends and trade of the global wood pellets. The global wood pellet market has increased

  9. Molecular Dissection of Xylan Biosynthesis During Wood Formation in Poplar

    Science.gov (United States)

    Xylan, being the second most abundant polysaccharide in dicot wood, is considered to be one of the factors contributing to wood biomass recalcitrance for biofuel production. To better utilize wood as biofuel feedstock, it is crucial to functionally characterize all the genes invo...

  10. Chapter 23: Corrosion of Metals in Wood Products

    Science.gov (United States)

    Samuel L. Zelinka

    2014-01-01

    The corrosion of metals in contact with wood has been studied for over 80 years, and in most situations wood is not corrosive [1]. Recently, however, the durability of fasteners in preservative--treated wood has become a concern. Changes in legislation and certification in the United States, the European Union, and Australasia have restricted the use of chromated...

  11. Insect-mediated nitrogen dynamics in decomposing wood

    Science.gov (United States)

    Michael D. Ulyshen

    2015-01-01

    1.Wood decomposition is characterised by complex and poorly understood nitrogen (N) dynamics with unclear implications for forest nutrient cycling and productivity.Wood-dwelling microbes have developed unique strategies for coping with the N limitations imposed by their substrate, including the translocation of N into wood by cord-forming fungi and the fixation of...

  12. 7 CFR 2902.42 - Wood and concrete sealers.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Wood and concrete sealers. 2902.42 Section 2902.42... Items § 2902.42 Wood and concrete sealers. (a) Definition. (1) Products that are penetrating liquids formulated to protect wood and/or concrete, including masonry and fiber cement siding, from damage caused by...

  13. The Relative Performance of New and Used GMA Wood Pallets

    Science.gov (United States)

    Marshall S. White

    1997-01-01

    The USDA Forest Service, Southern Research Station at Virginia Tech has funded wood pallet recycling research which includes documenting the relative performance of new and used GMA style wood pallets. An understanding of the relationship between pallet repair methods and pallet performance will lead to improved procedures for the recycling of wood pallets.

  14. U.S. wood pallet material use trends

    Science.gov (United States)

    Philip A. Araman; Robert J. Bush; E.Bradley Hager

    2010-01-01

    A series of five studies conducted by the Virginia Tech Department of Wood Science and Forest Products, in collaboration with the USDA – Forest Service (Blacksburg, Virginia), have tracked activity in the U.S. wood pallet and container industry between 1992 and 2006. The studies determined trends in wood use and pallet production within the industry, both new and...

  15. Exterior wood in the South : selection, applications, and finishes

    Science.gov (United States)

    Daniel L. Cassens; William C. Feist

    1991-01-01

    Wood continues to play an important role as a structural material in today’s high-tech society. As lumber and in reconstituted products, wood is commonly used for house siding, trim, decks, fences, and countless other exterior and interior applications. When wood is exposed to the elements, particularly sunlight and moisture, special precautions must be taken in...

  16. 75 FR 79019 - Multilayered Wood Flooring From China

    Science.gov (United States)

    2010-12-17

    ... COMMISSION Multilayered Wood Flooring From China Determinations On the basis of the record \\1\\ developed in... reason of imports from China of multilayered wood flooring, provided for in subheadings 4409.10, 4409.29... multilayered wood flooring. The following companies are members of the CAHP: Anderson Hardwood Floors, LLC...

  17. 76 FR 76435 - Multilayered Wood Flooring From China

    Science.gov (United States)

    2011-12-07

    ... COMMISSION Multilayered Wood Flooring From China Determinations On the basis of the record \\1\\ developed in... China of multilayered wood flooring, provided for in subheadings 4409.10, 4409.29, 4412.31, 4412.32... of multilayered wood flooring. The following companies are members of the CAHP: Anderson Hardwood...

  18. Advanced wood- and bio-composites : enhanced performance and sustainability

    Science.gov (United States)

    Jerrold E. Winandy

    2006-01-01

    Use of wood-based-composites technology to create value-added commodities and traditional construction materials is generally accepted worldwide. Engineered wood- and lignocellulosic-composite technologies allow users to add considerable value to a diverse number of wood- and lignocellulosic feedstocks including small-diameter timber, fast plantation-grown timber,...

  19. Purdue Plane Structures Analyzer II : a computerized wood engineering system

    Science.gov (United States)

    S. K. Suddarth; R. W. Wolfe

    1984-01-01

    The Purdue Plane Structures Analyzer (PPSA) is a computer program developed specifically for the analysis of wood structures. It uses recognized analysis procedures, in conjunction with recommendations of the 1982 National Design Specification for Wood Construction, to determine stresses and deflections of wood trusses and frames. The program offers several options for...

  20. Still rethinking the value of high wood density.

    Science.gov (United States)

    Larjavaara, Markku; Muller-Landau, Helene C

    2012-01-01

    In a previous paper, we questioned the traditional interpretation of the advantages and disadvantages of high wood density (Functional Ecology 24: 701-705). Niklas and Spatz (American Journal of Botany 97: 1587-1594) challenged the biomechanical relevance of studying properties of dry wood, including dry wood density, and stated that we erred in our claims regarding scaling. We first present the full derivation of our previous claims regarding scaling. We then examine how the fresh modulus of rupture and the elastic modulus scale with dry wood density and compare these scaling relationships with those for dry mechanical properties, using almost exactly the same data set analyzed by Niklas and Spatz. The derivation shows that given our assumptions that the modulus of rupture and elastic modulus are both proportional to wood density, the resistance to bending is inversely proportional to wood density and strength is inversely proportional with the square root of wood density, exactly as we previously claimed. The analyses show that the elastic modulus of fresh wood scales proportionally with wood density (exponent 1.05, 95% CI 0.90-1.11) but that the modulus of rupture of fresh wood does not, scaling instead with the 1.25 power of wood density (CI 1.18-1.31). The deviation from proportional scaling for modulus of rupture is so small that our central conclusion remains correct: for a given construction cost, trees with lower wood density have higher strength and higher resistance to bending.

  1. Integrated harvesting for conventional log and energy wood ...

    African Journals Online (AJOL)

    In the integrated energy wood harvesting plot, 37 m3 ha−1 of energy wood was extracted in addition to the sawlog and pulp log volumes. Extracting the additional energy wood reduced the productivity of the forwarder and increased the cost of extraction (AU$2.7 m−3) compared with the control plot (AU$2.2 m−3).

  2. Primary wood-product industries of southern New England - 1971

    Science.gov (United States)

    James T. Bones

    1973-01-01

    The results of a complete canvass of the primary wood manufacturers in southern New England. The report contains data about wood production and receipts for the states of the region. Comparisons are made with a similar 1952 survey and trends in industrial wood output are noted.

  3. Industrial wood productivity in the United States, 1900-1998

    Science.gov (United States)

    Peter J. Ince

    2000-01-01

    The productivity of U.S. wood and paper product output in terms of wood input is computed and displayed in graphs. Background tables provide supporting data. The productivity trend parallels trends in the recovered paper utilization rate. Recycling and wood residue use are key factors in productivity gains.

  4. Potential use of wood from forests damaged by industrial emissions

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, J.

    1984-01-01

    The amount of sawdust during chipping from dead, overdry trees in Czechoslovakia was found to increase with the time since the tree died; those dead for 4 and 8 years produced 6 and 12% more, respectively, than did fresh wood. Dry dead wood yielded less pulp, which was of a lower quality than that from fresh wood. 2 references.

  5. Tolerance of Serpula lacrymans to copper-based wood preservatives

    DEFF Research Database (Denmark)

    Hastrup, Anne Christine Steenkjær; Green, Frederick; Clausen, Carol A.

    2005-01-01

    Serpula lacrymans, the dry rot fungus, is considered the most economically important wood decay fungus in certain temperate regions of the world, namely northern Europe, Japan, and Australia. Previously, copper-based wood preservatives were commonly used for pressure treatment of wood for buildin...

  6. Characterizing phenolformaldehyde adhesive cure chemistry within the wood cell wall

    Science.gov (United States)

    Daniel J. Yelle; John Ralph

    2016-01-01

    Adhesive bonding of wood using phenol-formaldehyde remains the industrial standard in wood product bond durability. Not only does this adhesive infiltrate the cell wall, it also is believed to form primary bonds with wood cell wall polymers, particularly guaiacyl lignin. However, the mechanism by which phenol-formaldehyde adhesive intergrally interacts and bonds to...

  7. Adhesive Penetration of Wood and Its Effect on Bond Strength

    Science.gov (United States)

    Charles R. Frihart

    2016-01-01

    Woodworkers know that wood is porous in that adhesive flows into lumens for a mechanical interlock (1) and that wood absorbs water, allowing the use of water-borne adhesives. However, the anatomical aspects of wood that lend to its porosity are much more complicated and have a greater influence on adhesive performance than is normallyrealized or discussed. This...

  8. Nanoindentation methods for wood-adhesive bond lines

    Science.gov (United States)

    Joseph E. Jakes; Donald S. Stone; Charles R. Frihart

    2008-01-01

    As an adherend, wood is structurally, chemically, and mechanically more complex than metals or plastics, and the largest source of this complexity is wood’s chemical and mechanical inhomogeneities. Understanding and predicting the performance of adhesively bonded wood requires knowledge of the interactions occurring at length scales ranging from the macro down to the...

  9. Considerations in recycling of wood-plastic composites

    Science.gov (United States)

    J.E. Winandy; N.M. Stark; C.M. Clemons

    2004-01-01

    Wood-plastic composite decking has made major advances in material performance, processing and user acceptance. The growth of wood-plastic composite decking in North America has grown from less than 1 % in mid- 0's to over 10% today with growth projected by several studies to reach +20% before the end of this decade (2010). Preservative-treated wood decking...

  10. Structural condition assessment of in-service wood

    Science.gov (United States)

    Robert J. Ross; Brian K. Brashaw; Xiping Wang

    2006-01-01

    Wood is used extensively for both interior and exterior applications in the construction of a variety of structures (residential, agricultural, commercial, government, religious). The deterioration of an in-service wood member may result from a variety of causes during the life of a structure. It is important, therefore, to periodically assess the condition of wood...

  11. The fracture of wood in relation to its structure

    NARCIS (Netherlands)

    Jeronimides, G.

    1976-01-01

    The work of fracture of wood has been measured and the experimental results have been discussed in relation to a model based on various morphological aspects of wood structure. The asymmetrical helical structure of the S2 wall layers appears to be relevant to the fracture behaviour of wood in

  12. Innovations in Wood Protection in the age of Nanotechnology

    Science.gov (United States)

    Carol A. Clausen

    2014-01-01

    Advances in wood protection based on nanotechnology are being developed to improve resistance of wood products to biodeterioration, reduce environmental impacts from chemical leaching and resist UV degradation of in-service wood. A number of different approaches have been explored. First, the nanometals zinc oxide and copper oxide were evaluated as preservative...

  13. Theoretical modeling and experimental analyses of laminated wood composite poles

    Science.gov (United States)

    Cheng Piao; Todd F. Shupe; Vijaya Gopu; Chung Y. Hse

    2005-01-01

    Wood laminated composite poles consist of trapezoid-shaped wood strips bonded with synthetic resin. The thick-walled hollow poles had adequate strength and stiffness properties and were a promising substitute for solid wood poles. It was necessary to develop theoretical models to facilitate the manufacture and future installation and maintenance of this novel...

  14. Characterization of liquefied wood residues from different liquefaction conditions

    Science.gov (United States)

    Hui Pan; Todd f. Shupe; Chung-Yun Hse

    2007-01-01

    The amount of wood residue is used as a measurement of the extent of wood liquefaction. Characterization of the residue from wood liquefaction provides a new approach to understand some fundamental aspects of the liquefaction reaction. Residues were characterized by wet chemical analyses, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and...

  15. The wood anatomy of Gardenieae, Ixoreae and Mussaendeae (Rubiaceae)

    NARCIS (Netherlands)

    Koek-Noorman, Jifke

    1972-01-01

    The tribe Gardenieae in the restricted delimitation proposed by Bremekamp and Verdcourt is wood anatomically homogeneous. The genera of the Ixoreae studied by me also agree with each other in wood structure. Within the tribe Mussaendeae in the delimitation accepted by Schumann the wood anatomy shows

  16. Wood-hoopoes: are Phoeniculus purpureus niloticus (Neumann ...

    African Journals Online (AJOL)

    The Green Wood-hoopoe Phoeniculus purpureus (Miller 1784) is represented in all savanna regions of Africa, and has long been the subject of debate (Turner 2014). In addition, birds referred to as the Violet Wood-hoopoe (damarensis and granti) and. Black-billed Wood-hoopoe (somaliensis) appear very closely related to ...

  17. Calorific values of wood species of Nigerian origin | Kulla | Journal ...

    African Journals Online (AJOL)

    Calorific values of samples of fuel wood and charcoal from nine different wood species were determined by using a bomb calorimeter. The wood species azadritcha indica and cassia siamea had the highest calorific values of 358.0 and 300.6 kJ/kg respectively, while the charcoals of poliostigma thonningii, anageissus ...

  18. Tolerance of Serpula lacrymans to copper-based wood preservatives

    Science.gov (United States)

    Anne Christine Steenkjaer Hastrup; Frederick Green; Carol A. Clausen; Bo Jensen

    2005-01-01

    Serpula lacrymans, the dry rot fungus, is considered the most economically important wood decay fungus in certain temperate regions of the world, namely northern Europe, Japan, and Australia. Previously, copper-based wood preservatives were commonly used for pressure treatment of wood for building construction, but some decay fungi are known to be copper tolerant. In...

  19. Engineering economic assessment of residential wood heating in NY

    Science.gov (United States)

    We provide insight into the recent resurgence in residential wood heating in New York by: (i) examining the lifetime costs of outdoor wood hydronic heaters (OWHHs) and other whole-house residential wood heat devices,(ii) comparing these lifetime costs with those of competing tech...

  20. Corrosion of metals in wood : comparing the results of a rapid test method with long-term exposure tests across six wood treatments

    Science.gov (United States)

    Samuel L. Zelinka; Donald S. Stone

    2011-01-01

    This paper compares two methods of measuring the corrosion of steel and galvanized steel in wood: a long-term exposure test in solid wood and a rapid test method where fasteners are electrochemically polarized in extracts of wood treated with six different treatments. For traditional wood preservatives, the electrochemical extract method correlates with solid wood...

  1. Untargeted Identification of Wood Type-Specific Markers in Particulate Matter from Wood Combustion.

    Science.gov (United States)

    Weggler, Benedikt A; Ly-Verdu, Saray; Jennerwein, Maximilian; Sippula, Olli; Reda, Ahmed A; Orasche, Jürgen; Gröger, Thomas; Jokiniemi, Jorma; Zimmermann, Ralf

    2016-09-20

    Residential wood combustion emissions are one of the major global sources of particulate and gaseous organic pollutants. However, the detailed chemical compositions of these emissions are poorly characterized due to their highly complex molecular compositions, nonideal combustion conditions, and sample preparation steps. In this study, the particulate organic emissions from a masonry heater using three types of wood logs, namely, beech, birch, and spruce, were chemically characterized using thermal desorption in situ derivatization coupled to a GCxGC-ToF/MS system. Untargeted data analyses were performed using the comprehensive measurements. Univariate and multivariate chemometric tools, such as analysis of variance (ANOVA), principal component analysis (PCA), and ANOVA simultaneous component analysis (ASCA), were used to reduce the data to highly significant and wood type-specific features. This study reveals substances not previously considered in the literature as meaningful markers for differentiation among wood types.

  2. Service Life Prediction of Wood Claddings by in-situ Measurement of Wood Moisture Content

    DEFF Research Database (Denmark)

    Engelund, Emil Tang; Lindegaard, Berit; Morsing, Niels

    2009-01-01

    The Danish Technological Institute is in co-operation with industry partners running a project aiming at predicting the service life of different wood protecting systems. The project focuses on examining the moisture reducing effect of different protecting systems for timber claddings...... and the ability of these to maintain the appearance of the surfaces, when the wood is used in service class 3 (EN 335-1 1992). A façade construction is exposed to weathering at the field test area of the Danish Technological Institute (near Copenhagen). In specific locations of the construction measurements...... of wood moisture are done by in-situ resistance moisture meters (Lindegaard and Morsing 2006). The aim is that the test should form the basis of evaluation of the maintenance requirements and the prediction of service life of the surface treatment and the wood/construction. At the moment 60 test racks...

  3. Image-based characterization of cement pore structure using Wood`s metal intrusion

    Energy Technology Data Exchange (ETDEWEB)

    Willis, K.L.; Abell, A.B.; Lange, D.A. [Univ. of Illinois, Urbana, IL (United States). Dept. of Civil Engineering

    1998-12-01

    Mercury intrusion porosimetry is a widely used technique for characterization of the pore size distribution of cement-based materials. However, the technique has several limitations, among which are the ink bottle effect and a cylindrical pore geometry assumption that lead to inaccurate pore size distribution curves. By substituting Wood`s metal for mercury as the intruding liquid, scanning electron microscopy and imaging techniques can be applied to the sample after intrusion. The molten Wood`s metal solidifies within the pore structure of the sample, which allows it to be sectioned and observed in the scanning electron microscopy. From here, the sample can be analyzed both qualitatively, by observing the changes in the appearance of the sample as the intrusion process progresses, and quantitatively, by applying image analysis techniques. This study provides insight for better interpretation of mercury intrusion porosimetry results and the possibility for quantitative characterization of the spatial geometry of pores in cement-based materials.

  4. Science supporting the economic and environmental benefits of using wood and wood products in green building construction

    Science.gov (United States)

    Michael A. Ritter; Kenneth Skog; Richard Bergman

    2011-01-01

    The objective of this report is to summarize the scientific findings that support the environmental and economic benefits of using wood and wood products in green building construction. Despite documented advantages in many peer-reviewed scientific articles, most building professionals and members of the public do not recognize wood as a renewable resource or the role...

  5. Demineralization of wood using wood-derived acid: Towards a selective pyrolysis process for fuel and chemicals production

    NARCIS (Netherlands)

    Oudenhoven, Stijn; Westerhof, Roel Johannes Maria; Aldenkamp, N.; Brilman, Derk Willem Frederik; Kersten, Sascha R.A.

    2013-01-01

    A process concept for the pyrolysis of demineralized wood to obtain high organic and especially levoglucosan yields is proposed and tested experimentally. The wood is demineralized using organic acids, produced and concentrated within the same pyrolysis process. Pine wood was pyrolyzed in a

  6. Wood-based composite materials : panel products, glued-laminated timber, structural composite lumber, and wood-nonwood composite materials

    Science.gov (United States)

    Nicole M. Stark; Zhiyong Cai; Charles Carll

    2010-01-01

    This chapter gives an overview of the general types and composition of wood-based composite products and the materials and processes used to manufacture them. It describes conventional wood-based composite panels and structural composite materials intended for general construction, interior use, or both. This chapter also describes wood–nonwood composites. Mechanical...

  7. The influence of irradiated wood filler on some properties of polypropylene - wood composites

    Directory of Open Access Journals (Sweden)

    Điporović-Momčilović Milanka

    2007-01-01

    Full Text Available The problem of compatibility between the wood filler and thermoplastic matrix is of essential importance in composite production. Numerous methods have been developed for increasing this compatibility, which is still representing a challenging objective of composite research throughout the world. The research into these methods is primarily directed towards their efficiency from the viewpoint of the composite performance and their economical acceptability. The latter is of particular importance for the composite production in the developing countries with respect to the shortage of the corresponding funds. With this respect, the utilization of ionizing radiation might have considerable advantages. In this research, the beech wood flour was irradiated by a dose of 10 kGy of 60Co gamma rays for purpose of provoking the changes by the ionizing effect. The effects of ionizing radiation upon the properties of wood particles have been examined by IR spectroscopy and by determination of contents of hydroxyl groups in wood by acetylating as an indirect method. All these methods have been expected to reveal the chemical effects of the applied radiation treatment. The irradiated and the control wood flour were used in order to produce the samples of composite with polypropylene. The polypropylene-wood flour (PP-WF composites were produced with 40% of wood particles having fraction size 0.3 mm. The melt-blended composites were modified with amido-acrylic acid (AMACA as a new coupling agent synthesized for this propose in amount of 6 wt.% (based on wood filler and successively with 0.05 wt.% (based on PP of organic peroxide during mixing step. The composites containing coupling agents showed superior mechanical properties, compared to the untreated one. The highest extent of improvement of tensile was achieved in PP-WFl composites modified with AMACA coupling agent.

  8. Adoption of engineered wood products in Alaska

    Science.gov (United States)

    Joseph A. Roos; Indroneil Ganguly; Allen Brackley

    2009-01-01

    Based on an in-grade testing program, the Ketchikan Wood Technology Center has registered three proprietary grademarks for Alaska species of hemlock (Tsuga heterophylla (Raf.) Sarg.), yellow-cedar (Chamaecyparis nootkatensis (D. Don) Spach), and spruce (combined Sitka spruce [Picea sitchensis (Bong.) Carr...

  9. Thermomechanical pulping of loblolly pine juvenile wood

    Science.gov (United States)

    Gary C. Myers

    2002-01-01

    Intensive forest management, with a heavy emphasis on ecosystem management and restoring or maintaining forest health, will result in the removal of smaller diameter materials from the forest. This increases the probability of higher juvenile wood content in the harvested materials. The purpose of this study was to compare the performance of loblolly pine juvenile and...

  10. Combustion properties of wood impregnated with commercial ...

    African Journals Online (AJOL)

    The objective of this study was to determine some combustion properties of Calabrian pine (Pinus brutia Ten.) wood specimens impregnated with aqueous solutions of commercial fertilizers. Ammonium sulphate (AS) and diammonium phosphate (DAP) were used as commercial fertilizers. Diammonium phosphate and ...

  11. Corrosion avoidance with new wood preservatives

    Science.gov (United States)

    Samuel L. Zelinka; Douglas R. Rammer

    2006-01-01

    The increased use of alkaline copper quaternary (ACQ) and copper azole (CuAz) as wood preservatives for residential construction has led to concerns about the corrosion performance of fasteners. Information on the effects of these preservatives on the corrosion rate is limited, although Simpson Strong Tie has published a technical bulletin indicating that both ACQ and...

  12. Wood preservatives : choosing the right one

    Science.gov (United States)

    Matt Humphries; Stan Lebow; David Moses

    2009-01-01

    If you are having trouble choosing the right wood preservative system for your application, you are not alone. Dozens of products are available, some older types have gone out of use, others may be completely inappropriate for your application. As designers, specifiers and builders, you need to understand key information to be able to navigate through all of these...

  13. Prototype wood chunker used on Populus 'Tristis'

    Science.gov (United States)

    Rodger A. Arola; Roger C. Radcliffe; Sharon A. Winsauer

    1983-01-01

    Populus 'Tristis' trees grown under short-rotation, intensive culture were sampled and chunked in a prototype experimental wood chunking machine. Data presented describe the character of the trees chunked, the energy and power requirements for chunking, and the chunking rates Specific energy requirements for chunking Populus 'Tristis...

  14. Factors effecting paint performance on wood siding

    Science.gov (United States)

    Christopher G. Hunt; R. Sam Williams; Mark Knaebe; Peter Sotos; Steven Lacher

    2009-01-01

    Several different studies are compared to assess the effectiveness of commercial water repellent preservatives (WRP’s) in the late 1990’s on vertical and horizontal siding. Besides WRP, variables included wood species, exposure location (Wisconsin or Mississippi), and solid color stain vs. primer + paint. Data on substrate checking and paint flaking are presented....

  15. Wood combustion systems: status of environmental concerns

    Energy Technology Data Exchange (ETDEWEB)

    Dunwoody, J.E.; Takach, H.; Kelley, C.S.; Opalanko, R.; High, C.; Fege, A.

    1980-01-01

    This document addresses the uncertainties about environmental aspects of Wood Combustion Systems that remain to be resolved through research and development. The resolution of these uncertainties may require adjustments in the technology program before it can be commercialized. The impacts and concerns presented in the document are treated generically without reference to specific predetermined sites unless these are known. Hence, site-specific implications are not generally included in the assessment. The report consists of two main sections which describe the energy resource base involved, characteristics of the technology, and introduce the environmental concerns of implementing the technology; and which review the concerns related to wood combustion systems which are of significance for the environment. It also examines the likelihood and consequence of findings which might impede wood commercialization such as problems and uncertainties stemming from current or anticipated environmental regulation, or costs of potential environmental controls. This document is not a formal NEPA document. Appropriate NEPA documentation will be prepared after a formal wood combustion commercialization program is approved by DOE.

  16. Some thoughts on wood utilization research

    Science.gov (United States)

    P. Koch

    1980-01-01

    For over 17 years our small group of scientists has worked to improve utilization of southern wood species. From these years of experience, I have distilled some thoughts on research objectives, attributes of scientists who accomplish the objectives, administration of research, and transferring results from laboratory to industry. I would like to share these thoughts...

  17. Wood anatomy of the Blakeeae (Melastomataceae)

    NARCIS (Netherlands)

    Koek-Noorman, J.; Hogeweg, P.; Maanen, van W.H.M.; Welle, ter B.J.H.

    1979-01-01

    The present paper deals with the wood anatomy of the Blakeeae (Melastomataceae). Generic descriptions of the secondary xylem of Blakea, Topobea, and Huilaea are given and compared with data on 16 genera of the Miconieae. Numerical pattern detection was undertaken. The results confirm our preliminary

  18. Incorporating biopulping technology into wood yard operations

    Science.gov (United States)

    Gary M. Scott; Eric. Horn; Masood. Akhtar; Ross E. Swaney; Michael J. Lentz; David F. Shipley

    1998-01-01

    Biopulping is the treatment of wood chips and other lignocellulosic materials with lignin-degrading fungi prior to pulping. Ten years of industry-sponsored research has demonstrated the technical feasibility of the technology for mechanical pulping at a laboratory scale. Two 50-ton outdoor chip pile trials recently conducted at the USDA Forest Service, Forest Products...

  19. Raw materials for wood-polymer composites.

    Science.gov (United States)

    Craig Clemons

    2008-01-01

    To understand wood-plastic composites (WPCs) adequately, we must first understand the two main constituents. Though both are polymer based, they are very different in origin, structure, and performance. Polymers are high molecular weight materials whose performance is largely determined by its molecular architecture. In WPCs, a polymer matrix forms the continuous phase...

  20. Criterion 6, indicator 32 : exports as a share of wood and wood products production and imports as a share of wood and wood products production

    Science.gov (United States)

    James L. Howard; Rebecca Westby; Kenneth E. Skog

    2010-01-01

    The United States has become progressively more reliant on imports to meet consumption needs. In roundwood equivalents, imports of wood and paper products as a share of consumption increased from 13% to 30% between 1965 and 2005. This increase is due largely to increased softwood lumber import share, which increased from 15% in 1965 to 38% in 2006. The import share for...

  1. Wood energy markets, 2010-2011

    Science.gov (United States)

    Francisco Aguilar; Christopher Gaston; Rens Hartkamp; Warren Mabee; Kenneth Skog

    2011-01-01

    Global wood energy markets continue to grow, driven primarily by demand in the EU and its commitment to meet 20% of energy consumption from renewable sources by 2020. Large investments in industrial pellet-production capacity have been made under expectations of a continuously growing demand, mainly from the EU. Concern about how energy and climate-change policies may...

  2. Compression Debarking of Stored Wood Chips

    Science.gov (United States)

    James A. Mattson

    1974-01-01

    Two 750 ft. piles of unbarked chips were stored for 1 year to evaluate the effect of chip storage on the effectiveness of bark-chip separations-segregation methods under study. in processing stored chips suffered more wood loss than fresh chips.

  3. Pallets: A Growing Source of Recycled Wood

    Science.gov (United States)

    Robert J. Bush; Vijay S. Reddy; Philip A. Araman

    1997-01-01

    Considerable volumes of solid hardwoods, solid softwoods, and wood panels are used to manufacture pallets and containers in the United States. Increasing quantities of these materials are recovered from the waste stream for reuse and recycling. Two important groups involved in this recovery and recycling are firms in the pallet industry (SIC 2448) and landfill...

  4. Myxomycetes of the rotting cherry wood

    Directory of Open Access Journals (Sweden)

    Wanda Stojanowska

    2014-08-01

    Full Text Available During the years 1974-1975 on rotting cherry wood development of some Myxomycetes was observed. In that time 6 species of slime molds were noted: Arcyria denudata, Comatricha typhoides, Dyctidium cancellatum, Lycogala epidendrum, Physarum cinereum, Stemonitis ferruginea. In the decomposition of organic compounds apart from Myxomycetes other organism (Coprinus dessiminafus also take part.

  5. Specific heat of ovendry loblolly pine wood

    Science.gov (United States)

    Charles W. McMillin

    1969-01-01

    In the range of 333 K to 413 K, the specific heat of ovendry loblolly pine (Pinus taeda L.) wood was expressed by a linear function of temperature. No relationship was detected with specific gravity, growth rate, or distance from the pith; nor were differences found between earlywood and latewood.

  6. Housing trends and impact on wood manufacturing

    Science.gov (United States)

    Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen. Koenig

    2013-01-01

    Demand from housing and other construction-related sectors continues to be an important issue for the secondary wood products industry. Conducted in early 2013, this fourth annual survey provides updated information on the status and actions of U.S. manufacturers affected by these industries. The study is a joint effort by Virginia Tech, the USDA Forest Service, and...

  7. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)

    wood anchors around the high level of unemployment among the youths in. Nigeria. This unemployment is attributable to great emphasis placed on white collar jobs to the detriment of psychoproductive skills. In an effort to solve this problem, the informal sector has taken up the challenge through entrepreneurial exploits ...

  8. Liquefaction of torrefied wood using microwave irradiation

    Science.gov (United States)

    Mengchao Zhou; Thomas Eberhardt; Pingping Xin; Chung-Yun Hse; Hui Pan

    2016-01-01

    Torrefaction is an effective pretreatment method to improve the uniformity and quality of lignocellulosic biomass before further thermal processing (e.g., gasification, combustion). The objective of this study was to determine the impacts of torrefaction as a pretreatment before liquefaction. Wood chips were torrefied for 2 h at three different temperatures (230, 260,...

  9. Domestic competitiveness in secondary wood industries

    Science.gov (United States)

    Matthew Bumgardner; Urs Buehlmann; Albert Schuler; Rich Christianson

    2004-01-01

    As imports capture a substantial portion of the domestic wood furniture market, there is much speculation and concern as to the future of this and related industries. This study sought to obtain an industry perspective of trends in domestic manufacturing and importing, and to identify factors that might enhance domestic competitiveness. A mail survey was conducted...

  10. Use of wood in buildings and bridges

    Science.gov (United States)

    James P. Wacker

    2010-01-01

    In this chapter, the features of various types of building systems are described. Emphasis is placed on how these systems have adapted to the use of modern materials and techniques. For example, where floor, wall, and roof sheathing for light-frame construction were once commonly made from wood boards, sheathing is now commonly made from structural panel products, such...

  11. Air pressures in wood frame walls

    Science.gov (United States)

    Anton. TenWolde; Charles G. Carll; Vyto. Malinauskas

    1998-01-01

    Wind pressures can play an important role in the wetting of exterior walls (driving rain). In response, the rain screen concept, including compartmentalization and air spaces, has been developed to provide pressure equalization and limit water entry into the wall. However, conventional construction such as wood lap siding has not been evaluated as to its ability to...

  12. Wood adhesives containing proteins and carbohydrates

    Science.gov (United States)

    In recent years there has been resurgent interest in using biopolymers as sustainable and environmentally friendly ingredients in wood adhesive formulations. Among them, proteins and carbohydrates are the most commonly used. In this chapter, an overview is given of protein-based and carbohydrate-...

  13. Chapter 5:Biological Properties of Wood

    Science.gov (United States)

    Rebecca E. Ibach

    2013-01-01

    There are numerous biological degradations that wood is exposed to in various environments. Biological damage occurs when a log, sawn product, or final product is not stored, handled, or designed properly. Biological organisms such as bacteria, mold, stain, decay fungi, insects, and marine borers depend heavily on temperature and moisture conditions to grow. Figure 5.1...

  14. Wood machining review, 1963 through 1965

    Science.gov (United States)

    Peter Koch; Charles W. McMillin

    1966-01-01

    The purpose of this paper is to review significant research that has not previously been digested in recent Engligh-language texts1 and bibliographies2,3,4. In general, only findings published during 1963, 1964, and 1965 are considered. The reviewers' principal sources were the major world journals in wood science and...

  15. Wood preservation of low-temperature carbonisation

    NARCIS (Netherlands)

    Gosselink, R.J.A.; Krosse, A.M.A.; Putten, van der J.C.; Kolk, van der J.C.; Klerk-Engels, de B.; Dam, van J.E.G.

    2004-01-01

    Pine (Pinus sylvestris L.) wood with dimensions (100 x 10 x 10mm) was thermally treated at 275degreesC in a muffle oven to impart resistance to microbial degradation. Low-temperature carbonised pine resulted in a visually homogeneously treated product with a substantial (about 70% w/w) reduced

  16. Kuidas tuua Eestisse Tiger Woods / Raul Ranne

    Index Scriptorium Estoniae

    Ranne, Raul

    2008-01-01

    Reaalselt arvestades on tõenäosus, et Eestit väisab golfistaar Tiger Woods, muidugi olematu. Teoreetiliselt on see siiski võimalik. Vestlusest Jõelähtme golfiväljakut opereeriv Estonian Golf Country Clubi presidendi Mait Schmidtiga

  17. Pilot project: Wood chip combustion plant

    Energy Technology Data Exchange (ETDEWEB)

    Malsburg, G. von.

    1984-01-01

    Wood chip combustion systems as an alternative heating system can be operated at a justifiable expense of money and work. With the present cost structure such a system becomes interesting at an annual heating oil consumption of 10.000 l or more. The economic efficiency depends on the one hand on the level of the fixed costs and on the price of m/sup 3/ of wood chips on the other. Satisfactory automatic operation of a wood-chip combustion system is possible. The fuel, however, must be more or less homogeneous. The system uses feeder screws and due to the little space it needs it can be fitted to almost any existing heating system. If the heat demand and the chip feed are matched well and if the exchanger surfaces are cleaned regularly the waste gas temperatures will be low. Overheating does not occur and pollution is expected to be lower than in piece-wood fueled systems because the combustion process actually alternates between full operation mode and standstill. In standstill mode only a small fire is being maintained so that the production of nitric oxides, gases and emissions (tar, soot, dust etc.) is expected to drop sharply. Measurements of all these substances will be carried out during the heating period 1983/84.

  18. Duration of load effects of solid wood

    DEFF Research Database (Denmark)

    Svensson, Staffan

    Test methods for studying the effect of long-term loading on the load carrying capacity of structural wood are discussed. The impact of sampling procedures on test results is investigated and is exemplified. It is concluded from this investigation that the sampling method has a significant impact...

  19. Wood structure of the genus Talisia (Sapindaceae)

    NARCIS (Netherlands)

    Mennega, Alberta M.W.

    1972-01-01

    A description of the wood structure of 15 species of Talisia from the Guianas and adjacent areas is given. Among the neogean genera of the Sapindaceae Talisia is readily recognized by the combination of moderately few vessels, uniseriate or bi-seriate homocellular rays, aliformconfluent to banded

  20. Performance Assessment Of The Cameroon Wood Processing ...

    African Journals Online (AJOL)

    Baseline data were collected using structured questionnaire private discussions and personal observations to determine institutional and infrastructural capacity needs of 38 wood processing complexes. The data were ... Forest legislation is not enforceable enough to guarantee protection. Defining a new sectoral policy

  1. Limiting conditions for decay in wood systems

    Science.gov (United States)

    Paul I. Morris; Jerrold E. Winandy

    2002-01-01

    Hygrothermal models can predict temperature and moisture conditions in wall components subjected to real weather data, but specific data and a fundamental understanding of how temperature and wood moisture content dictate the progression of decay under these conditions is required for modellers to predict consequences of decay on building performance. It is well...

  2. Housing trends & impacts on wood products manufacturing

    Science.gov (United States)

    Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen. Koenig

    2012-01-01

    While there are some signs of improvement in the business conditions and sales volume faced by the secondary wood industry in relation to the housing market, they are slow in coming. This third annual housing market survey looks at the trends in the industry and analyzes what has changed in terms of market conditions, company performance and the actions being taken by...

  3. Modelling piloted ignition of wood and plastics

    NARCIS (Netherlands)

    Blijderveen, M. van; Bramer, E.A.; Brem, G.

    2012-01-01

    To gain insight in the startup of an incinerator, this article deals with piloted ignition. A newly developed model is described to predict the piloted ignition times of wood, PMMA and PVC. The model is based on the lower flammability limit and the adiabatic flame temperature at this limit. The

  4. Wood-framed houses for earthquake zones

    DEFF Research Database (Denmark)

    Hansen, Klavs Feilberg

    Wood-framed houses with a sheathing are suitable for use in earthquake zones. The Direction describes a method of determining the earthquake forces in a house and shows how these forces can be resisted by diaphragm action in the walls, floors, and roof, of the house. An appendix explains how...

  5. Wood use by Ohio's Amish furniture cluster

    Science.gov (United States)

    Matthew Bumgardner; Robert Romig; William Luppold

    2007-01-01

    Much has been reported regarding the decline of the U.S. wood furniture manufacturing industry. One segment that seems to be maintaining its competitiveness is the Amish-made furniture sector. The Amish traditionally have undertaken agriculture-related occupations (Stinner et al. 1989); however, as farmland has become increasingly scarce and expensive, and as the Amish...

  6. Relationship between ecological indicators and teak wood ...

    African Journals Online (AJOL)

    In the Tchorogo teak plantation in the Central Region of Togo (1°00'E, 8°21'N), a contribution to the sustainable forest management was implemented through the study of the relationship between ecological indicators and anatomical parameters of teak wood. To do this, three phytocoenoses have been described in the ...

  7. Anisotropy of Wood in the Microwave Region

    Science.gov (United States)

    Ziherl, Sasa; Bajc, Jurij; Urankar, Bernarda; Cepic, Mojca

    2010-01-01

    Wood is transparent for microwaves and due to its anisotropic structure has anisotropic dielectric properties. A laboratory experiment that allows for the qualitative demonstration and quantitative measurements of linear dichroism and birefringence in the microwave region is presented. As the proposed experiments are based on the anisotropy (of…

  8. 100 years of Wood's lamp revised

    NARCIS (Netherlands)

    Klatte, J. L.; van der Beek, N.; Kemperman, P. M. J. H.

    2015-01-01

    The Wood's lamp is a diagnostic tool in dermatology. Unfortunately, this useful tool is often overlooked in the busy and hectic outdoor dermatology clinic. To emphasize its value in modern dermatology, we present an updated review of the principles and applications and shed new light on its proper

  9. Wood torrefaction. Pilot tests and utilisation prospects

    Energy Technology Data Exchange (ETDEWEB)

    Wilen, C.; Jukola, P.; Jarvinen, T.; Sipila, K. [VTT Technical Reseach Centre of Finland, Espoo (Finland); Verhoeff, F.; Kiel, J. [Energy research Centre of the Netherlands, LE Petten (Netherlands)

    2013-09-15

    The research project 'Torrefaction of woody biomasses as energy carriers for the European markets' was carried out within the Tekes BioRefine programme in 2010-2012 and was coordinated by VTT. The main objective of the project was to create a discussion platform and collate basic information for the Finnish industrial stakeholders involved in developing torrefaction technology or planning to include torrefied biomass in their fuel supply for energy production. Given the availability of torrefaction pilot facilities in Europe, it was decided at an early phase of the national torrefaction research project not to build and operate separate pilot equipment, and thus save time and money. Experimental research was conducted in cooperation with ECN, The Netherlands. Finnish wood chips and crushed forest residue were tested at different torrefaction temperatures in the PATRIG torrefaction test rig with great success, and large quantities of torrefied wood chips and pellets were produced. CFD simulation work was carried out at VTT to investigate the feasibility of torrefied fuels to replace part of the coal. From the combustion point of view it seems feasible to replace coal by torrefied wood biomass with shares up to 50% by weight. Basic, small-scale experiments were carried out to compare torrefied wood pellets with conventional wood and straw pellets with regard to their handling and storage properties. The experiments showed that the torrefied pellets are clearly more hydrophobic than wood and straw pellets and do not disintegrate completely on exposure to water. A study on dust explosion and self-ignition characteristics indicated that the torrefied dust does not differ significantly from the normal biomass dust, but is clearly more reactive than coal dust. Commercial development of torrefaction is currently in its early phase. The current general view is that most of the demonstration plants have technical problems, which have delayed their commercial

  10. Fast Curing of Composite Wood Products

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Arthur J. Ragauskas

    2006-04-26

    The overall objective of this program is to develop low temperature curing technologies for UF and PF resins. This will be accomplished by: • Identifying the rate limiting UF and PF curing reactions for current market resins; • Developing new catalysts to accelerate curing reactions at reduced press temperatures and times. In summary, these new curing technologies will improve the strength properties of the composite wood products and minimize the detrimental effects of wood extractives on the final product while significantly reducing energy costs for wood composites. This study is related to the accelerated curing of resins for wood composites such as medium density fiberboard (MDF), particle board (PB) and oriented strandboard (OSB). The latter is frequently manufactured with a phenol-formaldehyde resin whereas ureaformaldehyde (UF) resins are usually used in for the former two grades of composite wood products. One of the reasons that hinder wider use of these resins in the manufacturing of wood composites is the slow curing speed as well as inferior bondability of UF resin. The fast curing of UP and PF resins has been identified as an attractive process development that would allow wood to be bonded at higher moisture contents and at lower press temperatures that currently employed. Several differing additives have been developed to enhance cure rates of PF resins including the use of organic esters, lactones and organic carbonates. A model compound study by Conner, Lorenz and Hirth (2002) employed 2- and 4-hydroxymethylphenol with organic esters to examine the chemical basis for the reported enhanced reactivity. Their studies suggested that the enhance curing in the presence of esters could be due to enhanced quinone methide formation or enhanced intermolecular SN2 reactions. In either case the esters do not function as true catalysts as they are consumed in the reaction and were not found to be incorporated in the polymerized resin product. An

  11. The effect of chemical treatment of wood flour on some of properties of wood plastic composite

    Directory of Open Access Journals (Sweden)

    Saeed Ismaeilimoghadam

    2016-12-01

    Full Text Available This research aimed to investigate the effect of chemical treatment of wood flour on some of physical, mechanical and morphological properties of wood plastic composite. Chemical treatment of wood flour at 7 levels without treatment, acetylation, benzoylation, mercerization, magnesium hydroxide, calcium hydroxide and warm water treatment were considered as variable factors. For evaluate reaction of wood flour with chemical materials, weight percent gain (WPG were calculated. After chemical treatment, Wood flour and polypropylene with weight ratio of 60 to 40 and 4 per hundred compound (phc of coupling agent mixed in the extruder device and then the specimens were fabricated by injection molding method. Then mechanical tests Included tensile, flexural and impact strength and physical examination, including water absorption and thickness swelling was performed on specimens according to (ASTM standard. Also to study the morphology of the composites, scanning electron microscopy (SEM was used. The results showed that by chemical treatment the mechanical strength increased and physical properties such as water absorption and thickness swelling decreased. Also the highest chemical treatments of wood flour was related to the banzylation treatment. As well as obtained results of scanning electron microscopy was indicate improve in cross linking between fibers and polymeric matrix on effect of chemical treatment, so that in treatment samples exiting of fibers into the matrix not observed.

  12. Factors controlling large-wood transport in a mountain river

    Science.gov (United States)

    Ruiz-Villanueva, Virginia; Wyżga, Bartłomiej; Zawiejska, Joanna; Hajdukiewicz, Maciej; Stoffel, Markus

    2016-11-01

    As with bedload transport, wood transport in rivers is governed by several factors such as flow regime, geomorphic configuration of the channel and floodplain, or wood size and shape. Because large-wood tends to be transported during floods, safety and logistical constraints make field measurements difficult. As a result, direct observation and measurements of the conditions of wood transport are scarce. This lack of direct observations and the complexity of the processes involved in wood transport may result in an incomplete understanding of wood transport processes. Numerical modelling provides an alternative approach to addressing some of the unknowns in the dynamics of large-wood in rivers. The aim of this study is to improve the understanding of controls governing wood transport in mountain rivers, combining numerical modelling and direct field observations. By defining different scenarios, we illustrate relationships between the rate of wood transport and discharge, wood size, and river morphology. We test these relationships for a wide, multithread reach and a narrower, partially channelized single-thread reach of the Czarny Dunajec River in the Polish Carpathians. Results indicate that a wide range of quantitative information about wood transport can be obtained from a combination of numerical modelling and field observations and from document contrasting patterns of wood transport in single- and multithread river reaches. On the one hand, log diameter seems to have a greater importance for wood transport in the multithread channel because of shallower flow, lower flow velocity, and lower stream power. Hydrodynamic conditions in the single-thread channel allow transport of large-wood pieces, whereas in the multithread reach, logs with diameters similar to water depth are not being moved. On the other hand, log length also exerts strong control on wood transport, more so in the single-thread than in the multithread reach. In any case, wood transport strongly

  13. Electrodialytic remediation of CCA treated waste wood in pilot scale

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Christensen, Iben Vernegren; Ottosen, Lisbeth M.

    2005-01-01

    When CCA (Chromated Copper Arsenate) treated wood is removed from service and turns into waste, the contents of Cu, Cr and As is still high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA treated waste wood...... study the utility of the method Electrodialytic Remediation was demonstrated for handling of CCA treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low level DC current as the cleaning agent, combines elektrokinetic movement of ions in the wood matrix with the princi...

  14. Strength of wood versus rate of testing - A theoretical approach

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    2007-01-01

    of the considered wood. Low quality wood shows lesser influence of testing rate. This observation agrees with the well-known statement made by Borg Madsen that weak wood subjected to a constant load, has a longer lifetime than strong wood. In general, the influence of testing rate on strength increases......Strength of wood is normally measured in ramp load experiments. Experience shows that strength increases with increasing rate of testing. This feature is considered theoretically in this paper. It is shown that the influence of testing rate is a phenomenon, which depends on the quality...

  15. Nontraditional sources of wood for the paper industry

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, J; Fabian, P.

    1984-01-01

    The nontraditional sources studied were wood waste from the forest industry (thinnings, limbs, roots and bark), and from the wood conversion industry (cuttings, slabs and sawdust) and wastes from the chemical processing of wood (spend liquors, sawdust and bark). Pulp produced from waste wood was more costly and of lower quality than pulp from tree stems. Bark pulping gave lower yields than wood pulping; pulps from tree tops and limbs had a lower average fibre length. The properties of beech kraft pulps produced from the stem, whole-tree and tree-top chips are tabulated and show that the stem gave the best pulp. 6 references.

  16. Wood fuel markets in Northern Europe. Price formation and internationalization

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, Olle

    2012-07-01

    High fossil fuel prices and ambitions to reduce greenhouse gas emissions have increased demand for renewable energy and are changing wood fuel market structures. Wood fuels are to a rapidly growing degree used in industrial proportions and traded in commercial markets. Wood fuels are seen as a key component to achieve policy goals related to climate change, especially in the EU. In the six papers that form the basis for this thesis, prices of wood fuels in Northern Europe are analyzed by means of time series analysis to increase understanding about the factors that govern market development. In Paper I, it is found that whereas the Austrian and German residential-quality wood pellet markets are integrated, Sweden is a separate market. The conclusion from Paper II is that despite a long history of trade in wood fuels between Estonia and Sweden, the two markets cannot be considered integrated. The results from Paper III indicate that refined and unrefined wood fuels should be seen as two separate markets, and that forest chips prices follow different trajectories depending on whether they are used in district heating or in forest industries. In Paper IV, it is acknowledged that although high and volatile oil prices are an important driver for the growth in demand for wood fuels, no significant spillover from oil price developments into Swedish wood fuel prices could be discerned in the time period 1993-2010. In Paper V, the conclusion is that prices of industrial roundwood and unrefined wood fuels followed a common trend in Sweden in the first decade of the 21st century. Paper VI shows that there is a significantly higher level of market maturity and internationalization in the Danish wood pellet market compared to the wood chip market in the country. In conclusion, this thesis uncovers some of the mechanisms that affect wood fuel markets, including the differences between unrefined wood fuels - such as wood chips - and the dynamic market for wood pellets. Whereas

  17. Energy use of decayed wood; Lahopuun maeaerae, sisaeltoe ja hankintakustannukset

    Energy Technology Data Exchange (ETDEWEB)

    Maekelae, M.; Lipponen, K. [Metsaeteho Oy, Helsinki (Finland)

    1997-12-01

    A study of the quality, amounts and delivery costs of decayed wood available for possible energy use will be carried out in co-operation by Metsaeteho and Forest Research Institute. The work will consist of the following sub-studies: Quality of decayed wood available for possible energy use, quantities of decayed wood available for possible energy use by municipalities in Western and Southern Finland, harvesting, transport and chipping costs of decayed wood in different delivery alternatives and as a practical example, quantities of decayed wood available for possible energy use in two potential consumption municipalities. (orig.)

  18. XPS characterization of naturally aged wood

    Energy Technology Data Exchange (ETDEWEB)

    Popescu, Carmen-Mihaela, E-mail: mihapop@icmpp.ro [Romanian Academy, ' P.Poni' Institute of Macromolecular Chemistry, Physical Chemistry of Polymers Laboratory, 41A Gr. Ghica Voda Alley, Ro 700487, Iasi (Romania); Tibirna, Carmen-Mihaela [Centre de Recherche sur le Bois (CRB), Departement des Sciences du Bois et de la Foret, Laval University, Quebec, G1 V 0A6 (Canada); Vasile, Cornelia [Romanian Academy, ' P.Poni' Institute of Macromolecular Chemistry, Physical Chemistry of Polymers Laboratory, 41A Gr. Ghica Voda Alley, Ro 700487, Iasi (Romania)

    2009-12-15

    Wood deterioration over time (by a simultaneously biological, chemical or physical attack) is an inevitable continuous process in the environment. This process destroys all heritage resulting in a loss of valuable old wooden structures and their properties. What type of deterioration occurs and how these processes impact the wood are important questions that need consideration if old wooden structures are to be studied and properly preserved. X-ray photoelectron spectroscopy (XPS) was employed to analyze the undegraded (sound wood of {approx}6 years) and degraded lime wood ({approx}150 years, {approx}180 years, {approx}250 years) from painting supports, differing in terms of the provenance, conservation status and environmental conditions of storage. Elaborated XPS analysis (comparison of C and O individual spectra, decomposition for each atomic component, calculation of O/C ratio) provided a view of the composition of the sample surfaces analyzed. On the basis of these results, it was confirmed that significant changes occurred in the first period of ageing, the {approx}150 years lime wood sample having the highest percent of the carbon atoms and the lowest percentage of oxygen atoms and, respectively O/C ratio. According to our previous studies (X-ray diffraction, FTIR spectroscopy, analytical pyrolysis combined with gas chromatography/mass spectrometry and ESR-spectroscopy results), these features could be attributed to the fact that hemicelluloses and amorphous cellulose are degraded in time, whereas the crystalline fraction of cellulose decreases more slowly than the amorphous one. Consequently, the observation may be made that lignin is not so easily degraded under the environmental conditions where paintings are frequently exposed.

  19. Degradation Characteristics of Wood Using Supercritical Alcohols

    Directory of Open Access Journals (Sweden)

    Jeeban Poudel

    2012-11-01

    Full Text Available In this work, the characteristics of wood degradation using supercritical alcohols have been studied. Supercritical ethanol and supercritical methanol were used as solvents. The kinetics of wood degradation were analyzed using the nonisothermal weight loss technique with heating rates of 3.1, 9.8, and 14.5 °C/min for ethanol and 5.2, 11.3, and 16.3 °C/min for methanol. Three different kinetic analysis methods were implemented to obtain the apparent activation energy and the overall reaction order for wood degradation using supercritical alcohols. These were used to compare with previous data for supercritical methanol. From this work, the activation energies of wood degradation in supercritical ethanol were obtained as 78.0–86.0, 40.1–48.1, and 114 kJ/mol for the different kinetic analysis methods used in this work. The activation energies of wood degradation in supercritical ethanol were obtained as 78.0–86.0, 40.1–48.1, and 114 kJ/mol. This paper also includes the analysis of the liquid products obtained from this work. The characteristic analysis of liquid products on increasing reaction temperature and time has been performed by GC-MS. The liquid products were categorized according to carbon numbers and aromatic/aliphatic components. It was found that higher conversion in supercritical ethanol occurs at a lower temperature than that of supercritical methanol. The product analysis shows that the majority of products fall in the 2 to 15 carbon number range.

  20. Signature wood modifications reveal decomposer community history.

    Directory of Open Access Journals (Sweden)

    Jonathan S Schilling

    Full Text Available Correlating plant litter decay rates with initial tissue traits (e.g. C, N contents is common practice, but in woody litter, predictive relationships are often weak. Variability in predicting wood decomposition is partially due to territorial competition among fungal decomposers that, in turn, have a range of nutritional strategies (rot types and consequences on residues. Given this biotic influence, researchers are increasingly using culture-independent tools in an attempt to link variability more directly to decomposer groups. Our goal was to complement these tools by using certain wood modifications as 'signatures' that provide more functional information about decomposer dominance than density loss. Specifically, we used dilute alkali solubility (DAS; higher for brown rot and lignin:density loss (L:D; higher for white rot to infer rot type (binary and fungal nutritional mode (gradient, respectively. We first determined strength of pattern among 29 fungi of known rot type by correlating DAS and L:D with mass loss in birch and pine. Having shown robust relationships for both techniques above a density loss threshold, we then demonstrated and resolved two issues relevant to species consortia and field trials, 1 spatial patchiness creating gravimetric bias (density bias, and 2 brown rot imprints prior or subsequent to white rot replacement (legacy effects. Finally, we field-tested our methods in a New Zealand Pinus radiata plantation in a paired-plot comparison. Overall, results validate these low-cost techniques that measure the collective histories of decomposer dominance in wood. The L:D measure also showed clear potential in classifying 'rot type' along a spectrum rather than as a traditional binary type (brown versus white rot, as it places the nutritional strategies of wood-degrading fungi on a scale (L:D=0-5, in this case. These information-rich measures of consequence can provide insight into their biological causes, strengthening the

  1. Wood ash. A potential forest fertilizer

    Energy Technology Data Exchange (ETDEWEB)

    Kuokkanen, M.; Kuokkanen, T. (Univ. of Oulu, Dept. of Chemistry (Finland)). email: toivo,kuokkanen@oulu.fi; Poeykioe, R. (City of Kemi (Finland)); Nurmesniemi, H. (Stora Enso Oyj, Veitsiluoto Mill, Kemi (Finland))

    2009-07-01

    The enhancement of wood-derived energy plays an important role in the Finnish energy and climate strategies. The use of new and upgraded biomass fuels, e.g. pellets and briquettes, has become more common in recent years, especially fuel pellets which are well suited for home heating applications. Although electrical and district heating are still the most popular heating systems in news detached and row houses in Finland, stoves and fireplaces which burn biomass fuels, e.g. logs, pellets and briquettes, are commonly used as a secondary heating system. It has been estimated that about 100 000 wood fired heating systems are currently in operation in Finland. Thousands of small-scale boilers are sold annually, and about 30% of the wood heating systems are fuelled by wood chips or pellets. Compared to traditional firewood, pellets provide possibilities for automation and optimization in the same way as for oil, with high combustion efficiency and small combustion residues. In addition, wood pellets can be stored and traded at the regional, national and international level. These features, combined with the other advantages such as environmental benefits (i.e. CO{sub 2} neutral fuel), low moisture content and bulk density (i.e. 0.28 bulk-m3 of wood pellets is equivalent to 1 bulk-m3 of wood chips), as well as a relatively high heating (i.e. calorific) value (about 17 MJ/kg), which allows long-distance transport without affecting the energy balance make wood pellets attractive in many countries from both the demand and the supply side of the market. Wood ash usually contains mineral plant nutrients, especially base cations (e.g. Ca, Mg, K), and has a strongly alkaline pH. For this reason, it would be ecologically beneficial if the ash that contains plant nutrients could be returned back to the forest ecosystem. This would save primary resources and can be seen as an example of the sustainable use of biomass. The purpose of this study was to determine the physical and

  2. Mechanical properties of wood disproportionately increase with increasing density.

    Science.gov (United States)

    Niklas, Karl J; Spatz, Hanns-Christof

    2012-01-01

    Prior work using a large data set has shown that the mechanical properties of wood disproportionately increase with increasing wood density across diverse species, e.g., stems composed of denser wood are stiffer and stronger than stems with equivalent cross-sections composed of less dense wood. However, an alternative approach, introducing the precondition of constant construction cost for the same data set, adduces that for any given construction cost, stems composed of lesser dense woods are stiffer and stronger then stems composed of denser woods. We evaluated these two approaches using generic allometric principles and the same large data set. This evaluation shows that construction costs cannot be constant over an entire ensemble of stems composed of different species of wood. For any specified construction cost (denoted by a k-value), only a particular subgroup of stems is addressed. The conclusions derived for this subgroup cannot be generalized to the entire ensemble of stems composed of different species of wood. Stems composed of denser wood are, on average as stiff and strong, or stiffer and stronger than stems with equivalent cross-sections composed of less dense wood. Denser wood may have a higher carbon construction cost, but its mechanical benefits likely outweigh the extra cost.

  3. Health effects assessment of exposure to particles from wood smoke

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Elsa; Dybdahl, M. (Technical Univ. of Denmark, National Food Institute, Dept. of Toxicology and Risk Assessment, Soeborg (Denmark)); Larsen, Poul Bo (Danish Environmental Protection Agency, Copenhagen (Denmark))

    2008-07-01

    The number of residential wood burning devices has increased in Denmark during the latest years and it has been estimated that there in 2005 were about 551,000 wood stoves and about 48,000 wood boilers in Denmark. This has resulted in an increased exposure of the general Danish population to pollutants associated with residential wood smoke. New Danish monitoring results on particulate matter (PM) in ambient air have shown elevated PM levels in areas with many wood stoves, particularly during wintertime when wood burning is common. Due to the size distribution of wood smoke particles essentially all will be contained in the PM{sub 2.5} fraction. It has been estimated that about 17,665 tonnes PM{sub 2.5} per year (2005) in Denmark come from residential wood combustion. Therefore, there is an increasing concern that adverse human health effects might be associated with the increased exposure to residential wood smoke. This project has been set up in order to review the scientific literature concerning adverse health effects of pollutants associated with residential wood smoke with the main focus on particulate matter and to quantify and evaluate, if possible, the impact on human health of the increased exposure to particles in residential wood smoke. (au)

  4. Aspen SUCROSE TRANSPORTER3 allocates carbon into wood fibers.

    Science.gov (United States)

    Mahboubi, Amir; Ratke, Christine; Gorzsás, András; Kumar, Manoj; Mellerowicz, Ewa J; Niittylä, Totte

    2013-12-01

    Wood formation in trees requires carbon import from the photosynthetic tissues. In several tree species, including Populus species, the majority of this carbon is derived from sucrose (Suc) transported in the phloem. The mechanism of radial Suc transport from phloem to developing wood is not well understood. We investigated the role of active Suc transport during secondary cell wall formation in hybrid aspen (Populus tremula × Populus tremuloides). We show that RNA interference-mediated reduction of PttSUT3 (for Suc/H(+) symporter) during secondary cell wall formation in developing wood caused thinner wood fiber walls accompanied by a reduction in cellulose and an increase in lignin. Suc content in the phloem and developing wood was not significantly changed. However, after (13)CO2 assimilation, the SUT3RNAi lines contained more (13)C than the wild type in the Suc-containing extract of developing wood. Hence, Suc was transported into developing wood, but the Suc-derived carbon was not efficiently incorporated to wood fiber walls. A yellow fluorescent protein:PttSUT3 fusion localized to plasma membrane, suggesting that reduced Suc import into developing wood fibers was the cause of the observed cell wall phenotype. The results show the importance of active Suc transport for wood formation in a symplasmically phloem-loading tree species and identify PttSUT3 as a principal transporter for carbon delivery into secondary cell wall-forming wood fibers.

  5. X-ray initiated polymerization of wood impregnants

    Science.gov (United States)

    Cleland, Marshall R.; Galloway, Richard A.; Berejka, Anthony J.; Montoney, Daniel; Driscoll, Mark; Smith, Leonard; Scott Larsen, L.

    2009-07-01

    X-rays, derived from a high energy, high-current electron beam (EB), initiated in-situ polymerization of a unique class of monomers that were found to penetrate the cell walls of wood. X-rays initiated an auto-catalytic acrylic polymerization and penetrated through thick pieces of wood. The final cured product having the polymerizate, a polymer, both in the wood cell lumens and in the cell walls is called wood impregnated with a wood-polymer penetrant (WPP). The controlled lower dose rate of X-rays overcame disproportionation encountered when using higher dose-rate electron beam initiation. With X-rays, the in-situ polymerization took place in one exposure of modest dose. With EB, multiple passes were needed to avoid excessive heat build-up and monomer volatilization. Having entered the cell walls of the wood and then being polymerized within the cell walls, these radiation-cured unique monomers imparted outstanding dimensional stability upon exposure of the impregnated wood to humidity cycling. The preferred monomer system was also chemically modified prior to impregnation with agents that would remain in the wood and prevent the growth of fungi and other microbials. This technique differs from historic uses of monomers that merely filled the lumens of the wood (historic wood-polymer composites), which are only suitable for indoor use. The WPP impregnated wood that was either X-ray cured or EB cured demonstrated enhanced structural properties, dimensional stability, and decay resistance.

  6. Penetration and Effectiveness of Micronized Copper in Refractory Wood Species.

    Directory of Open Access Journals (Sweden)

    Chiara Civardi

    Full Text Available The North American wood decking market mostly relies on easily treatable Southern yellow pine (SYP, which is being impregnated with micronized copper (MC wood preservatives since 2006. These formulations are composed of copper (Cu carbonate particles (CuCO3·Cu(OH2, with sizes ranging from 1 nm to 250 μm, according to manufacturers. MC-treated SYP wood is protected against decay by solubilized Cu2+ ions and unreacted CuCO3·Cu(OH2 particles that successively release Cu2+ ions (reservoir effect. The wood species used for the European wood decking market differ from the North American SYP. One of the most common species is Norway spruce wood, which is poorly treatable i.e. refractory due to the anatomical properties, like pore size and structure, and chemical composition, like pit membrane components or presence of wood extractives. Therefore, MC formulations may not suitable for refractory wood species common in the European market, despite their good performance in SYP. We evaluated the penetration effectiveness of MC azole (MCA in easily treatable Scots pine and in refractory Norway spruce wood. We assessed the effectiveness against the Cu-tolerant wood-destroying fungus Rhodonia placenta. Our findings show that MCA cannot easily penetrate refractory wood species and could not confirm the presence of a reservoir effect.

  7. Influência das dimensões da seção transversal do pilar e da excentricidade da força de compressão no comportamento estrutural de blocos sobre duas estacas

    Directory of Open Access Journals (Sweden)

    R. G. Delalibera

    Full Text Available Para o dimensionamento de blocos sobre estacas utilizam-se geralmente os modelos baseados na analogia de escoras (bielas e tirantes e teoria de flexão. O modelo de Blévot e Frémy [1] é um dos modelos de cálculo utilizado para o dimensionamento de blocos sobre estacas. Outro método para o dimensionamento de blocos sobre estacas é o modelo de viga que utiliza a teoria geral de flexão. No modelo dos pesquisadores franceses a seção transversal do pilar é proporcional à seção transversal da escora junto ao pilar. Para verificar a influência da seção transversal do pilar no comportamento estrutural dos blocos, realizaram-se ensaios experimentais de blocos sobre duas estacas, variando-se as dimensões da seção transversal do pilar e as alturas dos blocos. Análise comparativa dos resultados experimentais com relação aos resultados encontrados pelo modelo de Blévot e Frémy [1] foi realizada. Observou-se que o aumento da seção transversal do pilar conferiu aos blocos maiores capacidades resistentes.

  8. The use of urban wood waste as an energy resource

    Science.gov (United States)

    Khudyakova, G. I.; Danilova, D. A.; Khasanov, R. R.

    2017-06-01

    The capabilities use of wood waste in the Ekaterinburg city, generated during the felling of trees and sanitation in the care of green plantations in the streets, parks, squares, forest parks was investigated in this study. In the cities at the moment, all the wood, that is removed from city streets turns into waste completely. Wood waste is brought to the landfill of solid household waste, and moreover sorting and evaluation of the quantitative composition of wood waste is not carried out. Several technical solutions that are used in different countries have been proposed for the energy use of wood waste: heat and electrical energy generation, liquid and solid biofuel production. An estimation of the energy potential of the city wood waste was made, for total and for produced heat and electrical energy based on modern engineering developments. According to our estimates total energy potential of wood waste in the city measure up more 340 thousand GJ per year.

  9. FLEXURAL TESTING OF WOOD-CONCRETE COMPOSITE BEAM MADE FROM KAMPER AND BANGKIRAI WOOD

    Directory of Open Access Journals (Sweden)

    Fengky Satria Yoresta

    2015-07-01

    Full Text Available Certain wood has a tensile strength that almost equal with steel rebar in reinforced concrete beams. This research aims to understand the capacity and flexural behavior of concrete beams reinforced by wood (wood-concrete composite beam. Two different types of beams based on placement positions of wood layers are proposed in this study. Two kinds of wood used are consisted of Bangkirai (Shorea laevifolia and Kamper (Cinnamomum camphora, meanwhile the concrete mix ratio for all beams is 1 cement : 2 fine aggregates : 3 coarse aggregates. Bending test is conducted by using one-point loading method. The results show that composite beam using Bangkirai wood is stronger than beams using Kamper wood. More thicker wood layer in tensile area will increase the flexural strength of beams. Crack patterns identified could be classified into flexural cracks, shear cracks, and split on wood layer   Beberapa jenis kayu tertentu memiliki kekuatan tarik yang hampir sama dengan tulangan baja pada balok beton bertulang. Penelitian ini bertujuan memahami kapasitas dan perilaku lentur balok beton bertulang yang diperkuat menggunakan kayu (balok komposit beton-kayu. Dua tipe balok yang berbeda berdasarkan posisi penempatan kayu digunakan dalam penelitian ini. Dua jenis kayu yang digunakan adalah kayu Bangkirai (Shorea laevifolia and Kamper (Cinnamomum camphora, sementara itu rasio campuran beton untuk semua balok menggunakan perbandingan 1 semen : 2 agregat halus : 3 agregat kasar. Pengujian lentur dilakukan menggunakan metode one-point loading. Hasil penelitian menunjukkan bahwa balok komposit dengan kayu Bangkirai lebih kuat dibandingkan balok dengan kayu Kamper. Semakin tebal lapisan kayu yang berada di daerah tarik akan meningkatkan kekuatan lentur balok. Pola kerusakan yang teridentifikasi dapat diklasifikasikan menjadi retak lentur, retak geser, dan pecah pada kayu REFERENCES Boen T. (2010. Retrofitting Simple Buildings Damaged by Earthquakes. World Seismic

  10. Effect of Production Conditions of Wood Powder on Bending Properties of Wood Powder Molding Material without Adhesive

    Science.gov (United States)

    Imanishi, Hiroshi; Soma, Naho; Yamashita, Osamu; Miki, Tsunehisa; Kanayama, Kozo

    The effect of production conditions of wood powder on the bending properties of wood powder molding material was investigated. Wood powder was produced by milling wood into powder under conditions of different temperatures (25°C, 100°C) and moisture contents (0%MC, about 30%MC). Molding materials were produced from wood powder in stream atmosphere of high temperature and high pressure (175°C, 900kPa) using self-bonding ability of the wood powder. Adhesives, such as a synthetic resin, were not used. To evaluate the bending properties of the molding materials, the modulus of elasticity and the bending strength were examined by static three-point bending test. As for the characteristic of wood particle, in case of wood particle produced by milling wood under a condition of high temperature and high moisture content (100°C and about 30%MC), tendencies for intercellular layer to be exposed on surface of a particle and for the aspect ratio of particles to be large were confirmed. And in that case, the molding material showed the highest value in modulus of elasticity and bending strength. It is highly probable that the inprovement of the self-bonding ability of wood powder and the increase of the aspect ratio of wood particle take part in the improvement of strength properties of molding material.

  11. Wood decay in desert riverine environments

    Science.gov (United States)

    Andersen, Douglas; Stricker, Craig A.; Nelson, S. Mark

    2016-01-01

    Floodplain forests and the woody debris they produce are major components of riverine ecosystems in many arid and semiarid regions (drylands). We monitored breakdown and nitrogen dynamics in wood and bark from a native riparian tree, Fremont cottonwood (Populus deltoides subsp. wislizeni), along four North American desert streams. We placed locally-obtained, fresh, coarse material [disks or cylinders (∼500–2000 cm3)] along two cold-desert and two warm-desert rivers in the Colorado River Basin. Material was placed in both floodplain and aquatic environments, and left in situ for up to 12 years. We tested the hypothesis that breakdown would be fastest in relatively warm and moist aerobic environments by comparing the time required for 50% loss of initial ash-free dry matter (T50) calculated using exponential decay models incorporating a lag term. In cold-desert sites (Green and Yampa rivers, Colorado), disks of wood with bark attached exposed for up to 12 years in locations rarely inundated lost mass at a slower rate (T50 = 34 yr) than in locations inundated during most spring floods (T50 = 12 yr). At the latter locations, bark alone loss mass at a rate initially similar to whole disks (T50 = 13 yr), but which subsequently slowed. In warm-desert sites monitored for 3 years, cylinders of wood with bark removed lost mass very slowly (T50 = 60 yr) at a location never inundated (Bill Williams River, Arizona), whereas decay rate varied among aquatic locations (T50 = 20 yr in Bill Williams River; T50 = 3 yr in Las Vegas Wash, an effluent-dominated stream warmed by treated wastewater inflows). Invertebrates had a minor role in wood breakdown except at in-stream locations in Las Vegas Wash. The presence and form of change in nitrogen content during exposure varied among riverine environments. Our results suggest woody debris breakdown in desert riverine ecosystems is primarily a microbial process with rates determined by landscape position

  12. Environmental controls of wood entrapment in upper Midwestern streams

    Science.gov (United States)

    Merten, Eric C.; Finlay, Jacques; Johnson, Lucinda; Newman, Raymond; Stefan, Heinz; Vondracek, Bruce C.

    2011-01-01

    Wood deposited in streams provides a wide variety of ecosystem functions, including enhancing habitat for key species in stream food webs, increasing geomorphic and hydraulic heterogeneity and retaining organic matter. Given the strong role that wood plays in streams, factors that influence wood inputs, retention and transport are critical to stream ecology. Wood entrapment, the process of wood coming to rest after being swept downstream at least 10 m, is poorly understood, yet important for predicting stream function and success of restoration efforts. Data on entrapment were collected for a wide range of natural wood pieces (n = 344), stream geomorphology and hydraulic conditions in nine streams along the north shore of Lake Superior in Minnesota. Locations of pieces were determined in summer 2007 and again following an overbank stormflow event in fall 2007. The ratio of piece length to effective stream width (length ratio) and the weight of the piece were important in a multiple logistic regression model that explained 25% of the variance in wood entrapment. Entrapment remains difficult to predict in natural streams, and often may simply occur wherever wood pieces are located when high water recedes. However, this study can inform stream modifications to discourage entrapment at road crossings or other infrastructure by applying the model formula to estimate the effective width required to pass particular wood pieces. Conversely, these results could also be used to determine conditions (e.g. pre-existing large, stable pieces) that encourage entrapment where wood is valued for ecological functions.

  13. Lignin degradation in wood-feeding insects.

    Science.gov (United States)

    Geib, Scott M; Filley, Timothy R; Hatcher, Patrick G; Hoover, Kelli; Carlson, John E; Jimenez-Gasco, Maria del Mar; Nakagawa-Izumi, Akiko; Sleighter, Rachel L; Tien, Ming

    2008-09-02

    The aromatic polymer lignin protects plants from most forms of microbial attack. Despite the fact that a significant fraction of all lignocellulose degraded passes through arthropod guts, the fate of lignin in these systems is not known. Using tetramethylammonium hydroxide thermochemolysis, we show lignin degradation by two insect species, the Asian longhorned beetle (Anoplophora glabripennis) and the Pacific dampwood termite (Zootermopsis angusticollis). In both the beetle and termite, significant levels of propyl side-chain oxidation (depolymerization) and demethylation of ring methoxyl groups is detected; for the termite, ring hydroxylation is also observed. In addition, culture-independent fungal gut community analysis of A. glabripennis identified a single species of fungus in the Fusarium solani/Nectria haematococca species complex. This is a soft-rot fungus that may be contributing to wood degradation. These results transform our understanding of lignin degradation by wood-feeding insects.

  14. Particulate emissions from residential wood combustion

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo; Jensen, Ole Michael; Tarelho, Luis A. C.

    Residential wood combustion (RWC) in fireplaces and conventional appliances is the main contributor to fine particulate matter (PM2.5) emissions in Denmark and Portugal representing more than 30% of the total emissions [1;2]. Such estimations are uncertain concerning the wood consumption...... and official emission factors, not taking into account actual burning conditions in dwellings [3]. There is limited knowledge on the real-life performance and spatial distribution of existing appliance types. Few studies have been targeting to understand the influence of fuel operation habits on PM2.5...... the available estimations for Denmark and Portugal, suggesting a methodology to increase the accuracy of activity data and emission factors. This work is based on new studies carried out to quantify the PM2.5 emissions in daily life through field experiments in Danish dwellings and by considering typical...

  15. Market assessment for wood as fuel

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    The report presented summaries the findings of a market study to assess the potential acceptance of wood as a commercial fuel in SW England and the Southern half of Scotland, carried out during the period March to November 1986. The overall aim was to obtain information that would help achieve the successful market development of wood as a fuel. The principal objectives were to analyse available information on the supply and location of forestry waste, to profile potential industrial, commercial and institutional users of forestry waste as a fuel, to assess the scope for matching forestry waste supply with potential demands and to identify prospective host organisations for demonstration projects on the use of forestry wastes as fuel.

  16. Effects of Wood Ash on Soil Fungi

    DEFF Research Database (Denmark)

    Cruz Paredes, Carla

    in a Norway spruce forest where different amounts of wood ash were spread on the soil to study the effects on ectomycorrhizal (ECM) fungi, bioaccumulation of metals in sporocarps, and microbial communities. Laboratory microcosm experiments were run in parallel to the field studies, to compare the effects...... were used. However, the AM colonization was as abundant and active as in the untreated plots. In the Norway spruce experiment, ECM mycelial production and nitrogen (N) retention capacity remained unaffected. Moreover, ECM fungal richness, diversity and community composition did not change with wood ash......Reutilizing biomass ash on soil has been proposed to counteract soil acidity and to save fertilizer inputs by recycling valuable nutrients contained in biomass ash such as calcium (Ca), magnesium (Mg) and phosphorus (P). However, the heavy metal content of biomass ashes, such as cadmium (Cd...

  17. ELASTIC CHARACTERIZATION OF Eucalyptus citriodora WOOD

    Directory of Open Access Journals (Sweden)

    Adriano Wagner Ballarin

    2003-01-01

    Full Text Available This paper contributed to the elastic characterization of Eucalyptus citriodora grown inBrazil, considering an orthotropic model and evaluating its most important elastic constants.Considering this as a reference work to establish basic elastic ratios — several important elasticconstants of Brazilian woods were not determined yet - the experimental set-up utilized one tree of 65years old from plantations of “Horto Florestal Navarro de Andrade”, at Rio Claro-SP, Brazil. All theexperimental procedures attended NBR 7190/97 – Brazilian Code for wooden structures –withconventional tension and compression tests. Results showed statistical identity between compressionand tension modulus of elasticity. The relation observed between longitudinal and radial modulus ofelasticity was 10 (EL/ER ≈ 10 and same relation, considering shear modulus (modulus of rigidity was20 (EL/GLR ≈ 20. These results, associated with Poisson’s ratios herein determined, allow theoreticalmodeling of wood mechanical behavior in structures.

  18. Fuzzy Rule Suram for Wood Drying

    Science.gov (United States)

    Situmorang, Zakarias

    2017-12-01

    Implemented of fuzzy rule must used a look-up table as defuzzification analysis. Look-up table is the actuator plant to doing the value of fuzzification. Rule suram based of fuzzy logic with variables of weather is temperature ambient and humidity ambient, it implemented for wood drying process. The membership function of variable of state represented in error value and change error with typical map of triangle and map of trapezium. Result of analysis to reach 4 fuzzy rule in 81 conditions to control the output system can be constructed in a number of way of weather and conditions of air. It used to minimum of the consumption of electric energy by heater. One cycle of schedule drying is a serial of condition of chamber to process as use as a wood species.

  19. Characterization and comparison of a agricultural and forestry residues for energy purpose; Caracterizacao e comparacao de residuos agricolas e florestais para a producao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Jofran Luiz de; Silva, Jadir Nogueira da; Pereira, Emanuele Graciosa; Machado, Cassio Silva; Bezerra, Maria da Conceicao Trindade [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Agricola], Emails: jofranluiz@yahoo.com.br, jadir@ufv.br

    2010-07-01

    The large volume of waste generated by the industry of wood processing and agriculture is a problem existing in almost all regions of Brazil. Several environmental problems occur as contamination of soil and groundwater due to the accumulation and improper disposal of residues from forestry and agriculture industries. Brazil has agricultural and economic conditions to develop and take advantage of technologies to use wood and other biomass for energy purposes, for being privileged in terms of territorial extension, sunlight and water, essential factors for biomass production on a large scale. The wood chips and coffee husks are low cost residues, renewable and sometimes under utilized, they are environmentally friendly and potentially capable of generating heat, steam and electric power, thus they can contribute as an alternative fuel for generation of energy. In this context, this study aims to characterize and compare residues from the production of coffee and furniture industry. The biomasses were characterized and analyzed for density, heating value, proximate analysis (volatiles, ash and fixed carbon) and elemental composition. Results indicates large energy potential for coffee husks, with HHV equals to 18,6 MJ/Kg slightly higher than the HHV of the eucalyptus chip (17,3 MJ/Kg). (author)

  20. Theoretical Study of Wood Microwave Pretreatment in Rectangular Cavity for Fabricating Wood-Based Nanocomposites

    Directory of Open Access Journals (Sweden)

    Yongfeng Luo

    2014-01-01

    Full Text Available Modifying wood by high intensive microwave pretreatment method is widely researched for the fabrication of wood-based nanocomposites, but the temperature uniformity and energy efficiency of microwave pretreatment have not reached the ideal state. In this study, the pretreated wood in rectangular cavity by high intensive microwave is theoretically studied by the finite element method based on the Maxwell electromagnetic field equations and the heat and mass transfer theory. The results show that the temperature uniformity and energy efficiency are related to the microwave feeding modes. Compared with the single-port and the two-port feeding mode, the four-port feeding mode is the best case on temperature uniformity and energy efficiency. The optimized parameters of cavity to pretreatment wood are achieved, which are that the height of cavities is between 0.08 m and 0.11 m in the four-port feeding mode when the thickness of wood is 0.06 m.