WorldWideScience

Sample records for wolsong tritium removal

  1. A study of the tritium behavior in coolant and moderator system of heavy water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. P.; Song, S. S.; Chae, K. S. and others [Chosun Univ., Gwangju (Korea, Republic of)

    1993-12-15

    The objectives of this report is to present a regulatory policy on the environmental impact and personnel exposure by understanding the generation, accumulation, environmental release and management of tritium in heavy water reactors. By estimating the tritium concentration at Wolsong nuclear plant site by estimating and forecasting the generation and accumulation of tritium in coolant and moderator systems at Wolsong unit 1, we will study the management and release of tritium at Wolsong units 3 and 4 which are ready for construction. The major activities of this study are as follows : tritium generation and accumulation in heavy water reactor, a quantitative assessment of the accumulation and release of tritium at Wolsong nuclear plant site, heavy water management at Wolsong nuclear plants. The tritium concentration and accumulation trends in the systems at Wolsong unit 1 was estimated. A quantitative assessment of the tritium accumulation and release for Wolsong 2, 3 and 4 based on data from Wolsong 1 was performed. The tritium removal schemes and its long-term management plan were made.

  2. Tritium Removal from Carbon Plasma Facing Components

    Energy Technology Data Exchange (ETDEWEB)

    C.H. Skinner; J.P. Coad; G. Federici

    2003-11-24

    Tritium removal is a major unsolved development task for next-step devices with carbon plasma-facing components. The 2-3 order of magnitude increase in duty cycle and associated tritium accumulation rate in a next-step tokamak will place unprecedented demands on tritium removal technology. The associated technical risk can be mitigated only if suitable removal techniques are demonstrated on tokamaks before the construction of a next-step device. This article reviews the history of codeposition, the tritium experience of TFTR (Tokamak Fusion Test Reactor) and JET (Joint European Torus) and the tritium removal rate required to support ITER's planned operational schedule. The merits and shortcomings of various tritium removal techniques are discussed with particular emphasis on oxidation and laser surface heating.

  3. Tritium Removal by Laser Heating and Its Application to Tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    C.H. Skinner; C.A. Gentile; G. Guttadora; A. Carpe; S. Langish; K.M. Young; M. Nishi; W. Shu

    2001-11-16

    A novel laser heating technique has recently been applied to removing tritium from carbon tiles that had been exposed to deuterium-tritium (DT) plasmas in the Tokamak Test Fusion Reactor (TFTR). A continuous wave neodymium laser, of power up to 300 watts, was used to heat the surface of the tiles. The beam was focused to an intensity, typically 8 kW/cm{sup 2}, and rapidly scanned over the tile surface by galvanometer-driven scanning mirrors. Under the laser irradiation, the surface temperature increased dramatically, and temperatures up to 2,300 degrees C were recorded by an optical pyrometer. Tritium was released and circulated in a closed-loop system to an ionization chamber that measured the tritium concentration. Most of the tritium (up to 84%) could be released by the laser scan. This technique appears promising for tritium removal in a next-step DT device as it avoids oxidation, the associated deconditioning of the plasma facing surfaces, and the expense of processing large quantities of tritium oxide. Some engineering aspects of the implementation of this method in a next-step fusion device will be discussed.

  4. Mercury and tritium removal from DOE waste oils

    Energy Technology Data Exchange (ETDEWEB)

    Klasson, E.T. [Oak Ridge National Lab., TN (United States)

    1997-10-01

    This work covers the investigation of vacuum extraction as a means to remove tritiated contamination as well as the removal via sorption of dissolved mercury from contaminated oils. The radiation damage in oils from tritium causes production of hydrogen, methane, and low-molecular-weight hydrocarbons. When tritium gas is present in the oil, the tritium atom is incorporated into the formed hydrocarbons. The transformer industry measures gas content/composition of transformer oils as a diagnostic tool for the transformers` condition. The analytical approach (ASTM D3612-90) used for these measurements is vacuum extraction of all gases (H{sub 2}, N{sub 2}, O{sub 2}, CO, CO{sub 2}, etc.) followed by analysis of the evolved gas mixture. This extraction method will be adapted to remove dissolved gases (including tritium) from the SRS vacuum pump oil. It may be necessary to heat (60{degrees}C to 70{degrees}C) the oil during vacuum extraction to remove tritiated water. A method described in the procedures is a stripper column extraction, in which a carrier gas (argon) is used to remove dissolved gases from oil that is dispersed on high surface area beads. This method appears promising for scale-up as a treatment process, and a modified process is also being used as a dewatering technique by SD Myers, Inc. (a transformer consulting company) for transformers in the field by a mobile unit. Although some mercury may be removed during the vacuum extraction, the most common technique for removing mercury from oil is by using sulfur-impregnated activated carbon (SIAC). SIAC is currently being used by the petroleum industry to remove mercury from hydrocarbon mixtures, but the sorbent has not been previously tested on DOE vacuum oil waste. It is anticipated that a final process will be similar to technologies used by the petroleum industry and is comparable to ion exchange operations in large column-type reactors.

  5. Development on the technologies for tritium removal processes

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Ki Woong; Kim, Yong Ik; Nah, Jung Won; Koo, Je Hyoo; Kim, Kwang Lak; Chung, Heung Suk; Lee, Han Soo; Cho, Yung Hyun; Paek, Seung Woo; Kang, Heui Suk [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Chung, Yong Won [In Hah Univ., Inchun (Korea, Republic of)

    1994-12-01

    While tritium exposure to the site-workers in Wolsung NPP is upto about 40 % of the total personnel exposure, Korea Institute of Nuclear Safety has asked tritium removal facility, as one of the requirements for post reactor construction, after operation of four CANDU reactors in Wolsung site. For the purpose of essential removal of tritium from the heavy water system of the heavy water reactors, an experiment of Ar-N{sub 2} cryogenic distillation tower was carried out as a preliminary study for development of liquid-phase catalytic exchange - cryogenic hydrogen distillation process. The steady-state reached after 50 minutes under 90 K in the Ar-N{sub 2} distillation column (inner diameter 20 mm, height 500 mm) packed with Dixon ring ({phi} 3 mm x H 3 mm), and the ratios of Ar-concentration at the top and at the bottom measured by gas chromatography within {+-}1 % relative error was approximately 93 : 3. This value was distillation performances quite higher than those estimated by computer-simulation, which might be due to good efficiency of the packing materials. Several dynamic characteristics such as height equivalent to theoretical plate or effects of the kind of packing materials for Ar-N{sub 2} distillation column to be produced will be available for design study of cryogenic hydrogen distillation process. 19 figs, 17 tabs, 21 refs. (Author).

  6. Tritium

    Science.gov (United States)

    2011-11-01

    by [D][T] = [N0] 2. (38) Call the relative deuterium enrichment = [D] [N0] . (39) The relative burn rate, γ, of tritium will then be γ = − 1 [T] d...14 5 ADDITIONAL ISSUES 17 5.1 Deuterium -Rich Fueling . . . . . . . . . . . . . . . . . . . . . 17 5.2 Lithium...encourage new applications. Unlike the stable isotope deuterium , which makes up 156 ppm of hy- drogen on earth, tritium has a relatively short “shelf

  7. Pre-Conceptual Design for Northstar ⁹⁹Mo Process Tritium Removal System

    Energy Technology Data Exchange (ETDEWEB)

    Nobile, Arthur [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Reichert, Heidi [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hollis, William Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Taylor, Craig Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gordon, John Cameron [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dale, Gregory E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-12

    In this report we describe a preliminary concept for a Tritium Removal System (TRS) to remove tritium that is generated in the ⁹⁹Mo production process. Preliminary calculations have been performed to evaluate an approximate size for the system. The concept described utilizes well-established detritiation technology based on catalytic oxidation of tritium and tritiated hydrocarbons to water in a high temperature (400 °C) reactor and capture of water in a molecular sieve bed. The TRS concept involves use of a single system that would cycle through each of the seven online target systems and remove tritium that has been accumulated after one week’s run time. The TRS would perform cleanup operations on each target system for a period of approximately 24 hours. This would occur while the system is still online and just prior to target replacement, so tritium levels would at their minimum values for target replacement. In the concept, during normal operation a small fraction (1%) of the helium recirculating in the system would be diverted through the TRS and returned to the flow loop. With this approach sufficient levels of detritiation can be accomplished in a 24 hour period. In the study it was found that because of the need to maintain low oxygen levels in the system (<100 ppm) this increases the size of the catalytic reactor. As a result of this finding, consideration should be given to other methods for removing tritium from the system. Other methods such as catalytic exchange of tritium with an unsaturated organic compound and subsequent trapping on activated carbon or molecular sieve could offer advantages of reducing reactor size and operation at lower reactor temperature. However the most significant advantage of such an approach would be the ability to operate in very low oxygen environments, which would eliminate any concerns for oxidation of the target.

  8. Tritium removal from various lithium aluminates irradiated by fast and thermal neutrons (COMPLIMENT experiment)

    Energy Technology Data Exchange (ETDEWEB)

    Alvani, C. (ENEA CRE Casaccia, INN/NUMA, Rome (Italy)); Carconi, P.L. (ENEA CRE Casaccia, INN/NUMA, Rome (Italy)); Casadio, S. (ENEA CRE Casaccia, INN/NUMA, Rome (Italy)); Moauro, A. (ENEA CRE Casaccia, INN/NUMA, Rome (Italy))

    1994-02-01

    Within the frame of the COMPLIMENT experiment, [gamma]-LiAlO[sub 2] specimens with different microstructures (grain size distributions) were tested in the same environmental conditions to compare the effects caused by [sup 6]Li(n, [alpha])T reaction and by fast neutron scattering, the damaging dose being held at about the same level (1.6-1.8 dpa). The tritium retention times were obtained by the tritium removal of isothermal annealing under He + 0.1% H[sub 2] sweeping gas. In spite of the different Li burnups (2.5% and 0.25%) and the residual tritium concentrations which were found in the irradiated specimens (4.3 Ci/g and 0.09 Ci/g, respectively, for specimens held at 450 C during the irradiations), the kinetics of tritium removal was not found to be discriminated by the two different irradiations. Moreover, the results were found to agree with those previously obtained by the ''in-situ'' TEQUILA experiment, performed on the same type of Li ceramics. Hence, the apparent first order desorption mechanism has been confirmed to control the kinetics of tritium removal from the porous fine grain [gamma]-LiAlO[sub 2] ceramics. (orig.)

  9. Development on the cryogenic hydrogen isotopes distillation process technology for tritium removal (Final report)

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Ki Woung; Kim, Yong Ik; Na, Jeong Won; Ku, Jae Hyu; Kim, Kwang Rak; Jeong, Yong Won; Lee, Han Soo; Cho, Young Hyun; Ahn, Do Hee; Baek, Seung Woo; Kang, Hee Seok; Kim, You Sun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-12-01

    While tritium exposure to the site-workers in Wolsung NPP is up to about 40% of the total personnel exposure, Ministry of Science and Technology has asked tritium removal facility for requirement of post heavy-water reactor construction. For the purpose of essential removal of tritium from the Wolsung heavy-water reactor system, a preliminary study on the cryogenic Ar-N{sub 2} and H{sub 2}-D{sub 2} distillation process for development of liquid-phase catalytic exchange cryogenic hydrogen distillation process technology. The Ar-N{sub 2} distillation column showed good performance with approximately 97% of final Ar concentration, and a computer simulation code was modified using these data. A simulation code developed for cryogenic hydrogen isotopes (H{sub 2}, HD, D{sub 2}, HT, DT, T{sub 2}) distillation column showed good performance after comparison with the result of a JAERI code, and a H{sub 2}-D{sub 2} distillation column was made. Gas chromatography for hydrogen isotopes analysis was established using a vacuum sampling loop, and a schematic diagram of H{sub 2}-D{sub 2} distillation process was suggested. A feasibility on modification of H{sub 2}-D{sub 2} distillation process control system using Laser Raman Spectroscopy was studied, and the consideration points for tritium storage system for Wolsung tritium removal facility was suggested. 31 tabs., 79 figs., 68 refs. (Author).

  10. Development of tritium handing technology(II)

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H. S.; Ahn, D. H.; Kim, K. R. [KAERI, Taejon (Korea, Republic of); Yook, D. S.; Song, K. M.; Son, S. H. [KEPRI, Taejon (Korea, Republic of); Lee, K. J.; Jung, H. Y.; Song, M. C. [KAIST, Taejon (Korea, Republic of)

    2004-02-01

    The buildup rate of tritium in heavy water moderator and coolant of pressurized heavy water reactors in Wolsong Nuclear Power Plant is about 4MCi/a. The control of tritium is of increasing concern to the power reactor industry and general public in Korea. Metal tritides have the advantage of significantly decreasing the volume required to store tritium without increasing the pressure of storage vessel. Titanium hydride was safely used for the long-term storage of tritium. The experimental thermodynamic P-C-T data show that titanium soaks up hydrogen isotope gas at ambient temperature and modest pressures.

  11. A Study on Thermal Desorption of Deuterium in D-loaded SS316LN for ITER Tritium Removal System

    Energy Technology Data Exchange (ETDEWEB)

    Park, Myungchul; Kim, Heemoon; Ahn, Sangbok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Jaeyong; Lee, Sanghwa; LanAhn, Nguyen Thi [Hanyang University, Seoul (Korea, Republic of)

    2016-10-15

    Because Type B radwaste includes tritium on its inside, especially at vicinity of surface, tritium removal from the radwaste is a matter of concern in terms of the radwaste processes. Tritium behavior in materials is related with temperature. Considering a diffusion process, it is expected that tritium removal efficiency is enhanced with increasing baking temperature. However, there is a limitation about temperature due to facility capacity and economic aspect. Therefore, it is necessary to investigate the effect of temperature on the desorption behavior of Tritium in ITER materials. TDS analysis was performed in SS316LN loaded at 120, 240 and 350 °C. D2 concentration and the desorption peak temperature increased with increasing loading temperature. Using peak shift method with three ramp rates of 0.166, 0.332, and 0.5 °C/sec, trap activation energy of D in SS316LN loaded at 350 °C was 56 kJ/mol.

  12. 1997 evaluation of tritium removal and mitigation technologies for Hanford Site wastewaters

    Energy Technology Data Exchange (ETDEWEB)

    Jeppson, D.W.; Biyani, R.K.; Duncan, J.B.; Flyckt, D.L.; Mohondro, P.C.; Sinton, G.L.

    1997-07-24

    This report contains results of a biennial assessment of tritium separation technology and tritium nitration techniques for control of tritium bearing wastewaters at the Hanford Site. Tritium in wastewaters at Hanford have resulted from plutonium production, fuel reprocessing, and waste handling operations since 1944. this assessment was conducted in response to the Hanford Federal Facility Agreement and Consent Order.

  13. 2009 EVALUATION OF TRITIUM REMOVAL AND MITIGATION TECHNOLOGIES FOR WASTEWATER TREATMENT

    Energy Technology Data Exchange (ETDEWEB)

    LUECK KJ; GENESSE DJ; STEGEN GE

    2009-02-26

    Since 1995, a state-approved land disposal site (SALDS) has received tritium contaminated effluents from the Hanford Site Effluent Treatment Facility (ETF). Tritium in this effluent is mitigated by storage in slow moving groundwater to allow extended time for decay before the water reaches the site boundary. By this method, tritium in the SALDS is isolated from the general environment and human contact until it has decayed to acceptable levels. This report contains the 2009 update evaluation of alternative tritium mitigation techniques to control tritium in liquid effluents and groundwater at the Hanford site. A thorough literature review was completed and updated information is provided on state-of-the-art technologies for control of tritium in wastewaters. This report was prepared to satisfy the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-026-07B (Ecology, EPA, and DOE 2007). Tritium separation and isolation technologies are evaluated periodically to determine their feasibility for implementation to control Hanford site liquid effluents and groundwaters to meet the Us. Code of Federal Regulations (CFR), Title 40 CFR 141.16, drinking water maximum contaminant level (MCL) for tritium of 20,000 pOll and/or DOE Order 5400.5 as low as reasonably achievable (ALARA) policy. Since the 2004 evaluation, there have been a number of developments related to tritium separation and control with potential application in mitigating tritium contaminated wastewater. These are primarily focused in the areas of: (1) tritium recycling at a commercial facility in Cardiff, UK using integrated tritium separation technologies (water distillation, palladium membrane reactor, liquid phase catalytic exchange, thermal diffusion), (2) development and demonstration of Combined Electrolysis Catalytic Exchange (CECE) using hydrogen/water exchange to separate tritium from water, (3) evaporation of tritium contaminated water for dispersion in the

  14. Continuous aqueous tritium monitor

    Science.gov (United States)

    McManus, G.J.; Weesner, F.J.

    1987-10-19

    An apparatus for a selective on-line determination of aqueous tritium concentration is disclosed. A moist air stream of the liquid solution being analyzed is passed through a permeation dryer where the tritium and moisture are selectively removed to a purge air stream. The purge air stream is then analyzed for tritium concentration, humidity, and temperature, which allows computation of liquid tritium concentration. 2 figs.

  15. NNSA TRITIUM SUPPLY CHAIN

    Energy Technology Data Exchange (ETDEWEB)

    Wyrick, Steven [Savannah River National Laboratory, Aiken, SC, USA; Cordaro, Joseph [Savannah River National Laboratory, Aiken, SC, USA; Founds, Nanette [National Nuclear Security Administration, Albuquerque, NM, USA; Chambellan, Curtis [National Nuclear Security Administration, Albuquerque, NM, USA

    2013-08-21

    Savannah River Site plays a critical role in the Tritium Production Supply Chain for the National Nuclear Security Administration (NNSA). The entire process includes: • Production of Tritium Producing Burnable Absorber Rods (TPBARs) at the Westinghouse WesDyne Nuclear Fuels Plant in Columbia, South Carolina • Production of unobligated Low Enriched Uranium (LEU) at the United States Enrichment Corporation (USEC) in Portsmouth, Ohio • Irradiation of TPBARs with the LEU at the Tennessee Valley Authority (TVA) Watts Bar Reactor • Extraction of tritium from the irradiated TPBARs at the Tritium Extraction Facility (TEF) at Savannah River Site • Processing the tritium at the Savannah River Site, which includes removal of nonhydrogen species and separation of the hydrogen isotopes of protium, deuterium and tritium.

  16. Milestone Report - M4FT-17OR030107025 - Design of a tritium and iodine removal system for use with advanced TPOG

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Barry B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bruffey, Stephanie H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jordan, Jacob A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jubin, Robert Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-03-01

    US regulations will require the removal of iodine and tritium, along with other volatile and semi-volatile radionuclides, from the off-gas streams of nuclear fuel reprocessing plants. Advanced tritium pretreatment (TPT) is an additional head-end operation that could be incorporated within nuclear fuel reprocessing plants. It utilizes nitrogen dioxide (NOR2R) as an oxidant to convert UOR2R to UR3ROR8R prior to traditional aqueous dissolution. Advanced TPT can result in the quantitative volatilization of both tritium and iodine. Up-front removal of iodine is of significant advantage because otherwise it distributes to several unit operations and the associated off-gas streams. The off-gas streams will then require treatment to comply with US regulations. Advanced TPT is currently under development at Oak Ridge National Laboratory, and a kilogram-scale hot cell demonstration with used nuclear fuel (UNF) is planned for fiscal year (FY) 2018.

  17. Development of DUPIC fuel cycle technology - Assessment of Wolsong NPP fuel handling system for DUPIC fuel

    Energy Technology Data Exchange (ETDEWEB)

    Na, Bok Gyun; Nam, Gung Ihn [Korea Power Engineering Company, Taejon (Korea)

    2000-04-01

    The DUPIC fuel loading and discharge path of Wolsong NPP is studied assuming that DUPIC fuel is used at Wolsong NPP. Spent DUPIC fuel discharge path is irrelevant, since it uses the same spent fuel discharge path. Number of factors such as safety, economics of design change, radiation exposure to operators, easy of operation and maintenance, etc, are considered in the evaluation of path. A more detailed analysis of cost estimation of the selected path is also carried out. The study shows that DUPIC fuel loading path following through Spent Fuel Storage Bay and Spent Fuel Discharge Port in reverse direction will minimize the design change and additional equipment and radiation exposure to operators. The estimated total cost of using DUPIC fuel in Wolsong NPP based on price index of year 2000 is around 4.5 billion won. 4 refs., 30 figs., 13 tabs. (Author)

  18. DUPIC fuel compatibility assessment; accident analysis of Wolsong-NPP for DUPIC fuel

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J. H.; Kim, T. M.; Cho, C. H.; Hur, J. Y.; On, M. R.; Hwang, H. R.; Ahn, Z. K.; Kang, D. I. [KOPEC, Taejeon (Korea)

    2002-03-01

    Accident analysis of Wolsong NPP for DUPIC fuel is accomplished as a part of the nuclear fuel cycle technology development between the light water reactor and the heavy water reactor. Some analyses are performed for the thermohydraulic and radionuclide behaviour inside containment, radionuclide dispersion through atmosphere and public dose calculation after large loss of coolant accident. Wolsong 2 design data are used for containment model. For comparison with the result for natural uranium (NU) core, 100 % reactor outlet header break is selected for the limiting case which resulted in the significant public dose in Wolsong 2,3,4 FSAR. Single failure and dual failure cases, which are distinguished whether containment subsystem is working or not, are analyzed. PRESCON2 code for the thermohydraulic behaviour inside containment, SMART code for the radionuclide behaviour and PEAR code for atmospheric dispersion and the public dose calculation are used. 10 refs., 52 figs., 28 tabs. (Author)

  19. High Heat Flux Interactions and Tritium Removal from Plasma Facing Components by a Scanning Laser

    Energy Technology Data Exchange (ETDEWEB)

    C.H. Skinner; C.A. Gentile; A. Hassanein

    2002-01-28

    A new technique for studying high heat flux interactions with plasma facing components is presented. The beam from a continuous wave 300 W neodymium laser was focused to 80 W/mm2 and scanned at high speed over the surface of carbon tiles. These tiles were previously used in the TFTR [Tokamak Fusion Test Reactor] inner limiter and have a surface layer of amorphous hydrogenated carbon that was codeposited during plasma operations. Laser scanning released up to 84% of the codeposited tritium. The temperature rise of the codeposit on the tiles was significantly higher than that of the manufactured material. In one experiment, the codeposit surface temperature rose to 1,770 C while for the same conditions, the manufactured surface increased to only 1,080 C. The peak temperature did not follow the usual square-root dependence on heat pulse duration. Durations of order 100 ms resulted in brittle destruction and material loss from the surface, while a duration of approximately 10 ms showed minimal change. A digital microscope imaged the codeposit before, during, and after the interaction with the laser and revealed hot spots on a 100-micron scale. These results will be compared to analytic modeling and are relevant to the response of plasma facing components to disruptions and vertical displacement events (VDEs) in next-step magnetic fusion devices.

  20. Wolsong 2, 3, and 4 quarterly progress review report on NSSS design and engineering

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Sung Hoon; Kim, Sun Kee; Park, Tae Keun; Hah, Jung Koo; Lee, Song Kyoo; Choi, Byung Noh; Suh, Sung Kee; Kim, Jee Hyun; Lee, Se Yong; Jung, Suk Hwan; Kim, Jong Soo; Nam, Chul; Im, Jong Kyoon; Yuh, Jee Won; Suh, Sung Taek; Lee, Won Kook; Lee, Yung Chul; Suk, Soo Dong; Nam, Sang Koo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-04-01

    This is the Quarterly Progress Review Report for Wolsong NPP 2, 3 and 4 NSSS Design and Engineering which evaluates the performance of the project and describes the project highlight, manpower loading status, design and engineering and project related meetings by quarterly basis. 17 figs., 11 tabs. (Author).

  1. Severe Accident Progression and Consequence Assessment Methodology Upgrades in ISAAC for Wolsong CANDU6

    Energy Technology Data Exchange (ETDEWEB)

    Song, Y.M.; Kim, D.H. [KAERI, Daejeon (Korea, Republic of); Nijhawan, Sunil [Prolet Inc. 98 Burbank Drive, Toronto (Canada)

    2015-05-15

    Amongst the applications of integrated severe accident analysis codes like ISAAC, the principal are to a) help develop an understanding of the severe accident progression and its consequences; b) support the design of mitigation measures by providing for them the state of the reactor following an accident; and c) to provide a training platform for accident management actions. After Fukushima accident there is an increased awareness of the need to implement effective and appropriate mitigation measures and empower the operators with training and understanding about severe accident progression and control opportunities. An updated code with reduced uncertainties can better serve these needs of the utility making decisions about mitigation measures and corrective actions. Optimal deployment of systems such as PARS and filtered containment venting require information on reactor transients for a number of critical parameters. Thus there is a greater consensus now for a demonstrated ability to perform accident progression and consequence assessment analyses with reduced uncertainties. Analyses must now provide source term transients that represent the best in available understanding and so meaningfully support mitigation measures. This requires removal of known simplifications and inclusion of all quantifiable and risk significant phenomena. Advances in understanding of CANDU6 severe accident progression reflected in the severe accident integrated code ROSHNI are being incorporated into ISAAC using CANDU specific component and system models developed and verified for Wolsong CANDU 6 reactors. A significant and comprehensive upgrade of core behavior models is being implemented in ISAAC to properly reflect the large variability amongst fuel channels in feeder geometry, fuel thermal powers and burnup. The paper summarizes the models that have been added and provides some results to illustrate code capabilities. ISAAC is being updated to meet the current requirements and

  2. Tritium monitor and collection system

    Science.gov (United States)

    Bourne, Gary L.; Meikrantz, David H.; Ely, Walter E.; Tuggle, Dale G.; Grafwallner, Ervin G.; Wickham, Keith L.; Maltrud, Herman R.; Baker, John D.

    1992-01-01

    This system measures tritium on-line and collects tritium from a flowing inert gas stream. It separates the tritium from other non-hydrogen isotope contaminating gases, whether radioactive or not. The collecting portion of the system is constructed of various zirconium alloys called getters. These alloys adsorb tritium in any of its forms at one temperature and at a higher temperature release it as a gas. The system consists of four on-line getters and heaters, two ion chamber detectors, two collection getters, and two guard getters. When the incoming gas stream is valved through the on-line getters, 99.9% of it is adsorbed and the remainder continues to the guard getter where traces of tritium not collected earlier are adsorbed. The inert gas stream then exits the system to the decay chamber. Once the on-line getter has collected tritium for a predetermined time, it is valved off and the next on-line getter is valved on. Simultaneously, the first getter is heated and a pure helium purge is employed to carry the tritium from the getter. The tritium loaded gas stream is then routed through an ion chamber which measures the tritium activity. The ion chamber effluent passes through a collection getter that readsorbs the tritium and is removable from the system once it is loaded and is then replaced with a clean getter. Prior to removal of the collection getter, the system switches to a parallel collection getter. The effluent from the collection getter passes through a guard getter to remove traces of tritium prior to exiting the system. The tritium loaded collection getter, once removed, is analyzed by liquid scintillation techniques. The entire sequence is under computer control except for the removal and analysis of the collection getter.

  3. Study of Oxidizing Agents for Tritium Removal in ITER -Compatible Conditions: Alternatives to Oxygen and Ozone

    Energy Technology Data Exchange (ETDEWEB)

    Tabares, F. L.; Tafalla, D.; Ferreira, J. A.; Gomez-Aleixandre, C.; Maria Albella, J.; Soria, J.; Rodriguez-Ramos, I.

    2007-07-20

    In the present report, the studies of tritiated carbon-film removal by oxidizing agents other than Oxygen and Ozone in ITER are described. Exposure of laboratory produced a-C:H/D films and tokamak flakes (Asdex Upgrade and Textor) to nitric oxide, water and hydrogen peroxide has been carried out. Temperatures of exposure up to 350 degree centigree were used, and thermal desorption of the samples at temperatures up to 750 degree centigree was performed for sample characterization prior to and after the treatment. Elastic Recoil Detection Analysis (ERDA), Infrared Spectroscopy, XPS and Nano indentation hardness analysis were applied to the characterization of the physical and chemical changes of the samples. This work was done under the EFDA Task 04-1175. (Author) 8 refs.

  4. Design optimization of metal getter reactors for removing tritium from flowing gas streams

    Energy Technology Data Exchange (ETDEWEB)

    Nobile, A.; Bieniewski, T.; Frame, K.; Little, R.; Fisher, K. [Los Alamos National Lab., NM (United States)

    1995-10-01

    A reaction engineering approach was used to design a SAES St 198 metal getter reactor for a glovebox detritiation system. The detritiation system will be used to decontaminate and decommission an Li(D, T)-contaminated glovebox previously used in the U.S. nuclear weapons program. The approach involved development of a model that calculates reactor breakthrough curves as a function of various reactor physical parameters. Experiments involving flow of deuterium in nitrogen through a small metal getter reactor validated the model. The model was then used to investigate the effects of temperature, getter pellet size, reactor diameter, and reactor volume on the reactor performance. The resulting design was a 7 cm diam. by 40 cm long cylindrical reactor that operates at 250 {degree}C, and is filled with 5 kg of as-received SAES St 198 getter pellets. The reactor handles a flow rate of 100 L/min. An St 909 getter reactor was used upstream of the St 198 reactor for impurity removal and water decomposition. The glovebox cleanup system design and getter reactor mechanical design are discussed. 14 refs., 6 figs.

  5. Tritium trick

    Science.gov (United States)

    Green, W. V.; Zukas, E. G.; Eash, D. T.

    1971-01-01

    Large controlled amounts of helium in uniform concentration in thick samples can be obtained through the radioactive decay of dissolved tritium gas to He3. The term, tritium trick, applies to the case when helium, added by this method, is used to simulate (n,alpha) production of helium in simulated hard flux radiation damage studies.

  6. Sorbent materials for fusion reactor tritium processing

    Energy Technology Data Exchange (ETDEWEB)

    Toci, F. [JRC Ispra (Italy). Nucl. Fuel Cycle Div.; Viola, A. [JRC Ispra (Italy). Nucl. Fuel Cycle Div.; Edwards, R.A.H. [JRC Ispra (Italy). Nucl. Fuel Cycle Div.; Mencarelli, T. [JRC Ispra (Italy). Nucl. Fuel Cycle Div.; Forcina, V. [JRC Ispra (Italy). Nucl. Fuel Cycle Div.

    1995-03-01

    A fusion reactor (such as NET/ITER) which breeds its own tritium fuel requires tritium recovery, purification and separation from the other isotopes. Cyclic adsorption processes are strong candidates for several of the processes involved: amongst other advantages, they promise a low tritium inventory. A good adsorbent for such processes must have high adsorption capacity, high selectivity and very low tritium retention after each cycle. Pure zeolite powder is shown to have an excellent combination of these three properties. However, in practice problems can arise from tritium which is not removed by reactivation. In this paper we show that tritium retention in zeolites can be caused either by water retained in the zeolite structure, which can be removed by ore rigorous activation, or by water tapped on binders in commercial pellets. (orig.).

  7. Analysis of Ruptured Heater Tube of Degasser Condenser in Wolsong Unit 4

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hong Pyo; Kim, J. S.; Lim, Y. S.; Kim, S. S.; Hwang, S. S.; Kim, D. J.; Kim, S. W.; Jeong, M. K.; Hong, J. H

    2007-08-15

    In a degasser condenser in Wolsong unit 4, the cracks were found in the heater tube no. 6 and no. 7. To avoid additional damages in the specimen during a decontamination process for the previous analysis, the cracks were analyzed without any decontamination process in this work. We performed the investigation of the ruptured surface morphology, the EDS analysis of the ruptured surface, the microstructural analysis of Alloy 800H sheath tube and literature survey to find the failure mechanism. From the results, it was expected that the sheath tube has been exposed in a steam condition as the coolant level was decreased in the degasser condenser, leading to the rupture of the sheath tube.

  8. Tritium handling in vacuum systems

    Energy Technology Data Exchange (ETDEWEB)

    Gill, J.T. [Monsanto Research Corp., Miamisburg, OH (United States). Mound Facility; Coffin, D.O. [Los Alamos National Lab., NM (United States)

    1986-10-01

    This report provides a course in Tritium handling in vacuum systems. Topics presented are: Properties of Tritium; Tritium compatibility of materials; Tritium-compatible vacuum equipment; and Tritium waste treatment.

  9. Tritium Storage Material

    Energy Technology Data Exchange (ETDEWEB)

    Cowgill, Donald F. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Hydrogen and Metallurgical Science Dept.; Luo, Weifang [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Hydrogen and Metallurgical Science Dept.; Smugeresky, John E. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Hydrogen and Metallurgical Science Dept.; Robinson, David B. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Energy Systems Dept.; Fares, Stephen James [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Energy Systems Dept.; Ong, Markus D. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Energy Systems Dept.; Arslan, Ilke [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Energy Systems Dept.; Tran, Kim L. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Energy Systems Dept.; McCarty, Kevin F. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Materials Physics Dept.; Sartor, George B. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Thermal/Fluid Science and Engineering; Stewart, Kenneth D. [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Engineered Material Dept.; Clift, W. Miles [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Engineered Material Dept.

    2008-09-01

    Nano-structured palladium is examined as a tritium storage material with the potential to release beta-decay-generated helium at the generation rate, thereby mitigating the aging effects produced by enlarging He bubbles. Helium retention in proposed structures is modeled by adapting the Sandia Bubble Evolution model to nano-dimensional material. The model shows that even with ligament dimensions of 6-12 nm, elevated temperatures will be required for low He retention. Two nanomaterial synthesis pathways were explored: de-alloying and surfactant templating. For de-alloying, PdAg alloys with piranha etchants appeared likely to generate the desired morphology with some additional development effort. Nano-structured 50 nm Pd particles with 2-3 nm pores were successfully produced by surfactant templating using PdCl salts and an oligo(ethylene oxide) hexadecyl ether surfactant. Tests were performed on this material to investigate processes for removing residual pore fluids and to examine the thermal stability of pores. A tritium manifold was fabricated to measure the early He release behavior of this and Pd black material and is installed in the Tritium Science Station glove box at LLNL. Pressure-composition isotherms and particle sizes of a commercial Pd black were measured.

  10. Disposal of tritium-exposed metal hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Nobile, A.; Motyka, T.

    1991-12-31

    A plan has been established for disposal of tritium-exposed metal hydrides used in Savannah River Site (SRS) tritium production or Materials Test Facility (MTF) R&D operations. The recommended plan assumes that the first tritium-exposed metal hydrides will be disposed of after startup of the Solid Waste Disposal Facility (SWDF) Expansion Project in 1992, and thus the plan is consistent with the new disposal requiremkents that will be in effect for the SWDF Expansion Project. Process beds containing tritium-exposed metal hydride powder will be disposed of without removal of the powder from the bed; however, disposal of tritium-exposed metal hydride powder that has been removed from its process vessel is also addressed.

  11. Magmatic tritium

    Energy Technology Data Exchange (ETDEWEB)

    Goff, F.; Aams, A.I. [Los Alamos National Lab., NM (United States); McMurtry, G.M. [Univ. of Hawaii, Honolulu, HI (United States); Shevenell, L. [Univ. of Nevada, Reno, NV (United States); Pettit, D.R. [National Aeronautics and Space Administration (United States); Stimac, J.A. [Union Geothermal Company (United States); Werner, C. [Pennsylvania State Univ., University Park, PA (United States)

    1997-07-01

    This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory. Detailed geochemical sampling of high-temperature fumaroles, background water, and fresh magmatic products from 14 active volcanoes reveal that they do not produce measurable amounts of tritium ({sup 3}H) of deep origin (<0.1 T.U. or <0.32 pCi/kg H{sub 2}O). On the other hand, all volcanoes produce mixtures of meteoric and magmatic fluids that contain measurable {sup 3}H from the meteoric end-member. The results show that cold fusion is probably not a significant deep earth process but the samples and data have wide application to a host of other volcanological topics.

  12. Quick management of accidental tritium exposure cases.

    Science.gov (United States)

    Singh, Vishwanath P; Badiger, N M; Managanvi, S S; Bhat, H R

    2012-07-01

    Removal half-life (RHL) of tritium is one of the best means for optimising medical treatment, reduction of committed effective dose (CED) and quick/easy handling of a large group of workers for medical treatment reference. The removal of tritium from the body depends on age, temperature, relative humidity and daily rainfall; so tritium removal rate, its follow-up and proper data analysis and recording are the best techniques for management of accidental acute tritium exposed cases. The decision of referring for medical treatment or medical intervention (MI) would be based on workers' tritium RHL history taken from their bodies at the facilities. The workers with tritium intake up to 1 ALI shall not be considered for medical treatment as it is a derived limit of annual total effective dose. The short-term MI may be considered for tritium intake of 1-10 ALI; however, if the results show intake ≥100 ALI, extended strong medical/therapeutic intervention may be recommended based on the severity of exposure for maximum CED reduction requirements and annual total effective dose limit. The methodology is very useful for pressurized heavy water reactors (PHWRs) which are mainly operated by Canada and India and future fusion reactor technologies. Proper management will optimise the cases for medical treatment and enhance public acceptance of nuclear fission and fusion reactor technologies.

  13. The Safety and Tritium Applied Research (STAR) Facility: Status-2004*

    Energy Technology Data Exchange (ETDEWEB)

    R. A. Anderl; G. R. Longhurst; R. J. Pawelko; J. P. Sharpe; S. T. Schuetz; D. A. Petti

    2004-09-01

    The purpose of this paper is to present the current status of the development of the Safety and Tritium Applied Research (STAR) Facility at the Idaho National Engineering and Environmental Laboratory (INEEL). Designated a National User Facility by the US DOE, the primary mission of STAR is to provide laboratory infrastructure to study tritium science and technology issues associated with the development of safe and environmentally friendly fusion energy. Both tritium and non-tritium fusion safety research is pursued along three key thrust areas: (1) plasma-material interactions of plasma-facing component (PFC) materials exposed to energetic tritium and deuterium ions, (2) fusion safety concerns related to PFC material chemical reactivity and dust/debris generation, activation product mobilization, and tritium behavior in fusion systems, and (3) molten salts and fusion liquids for tritium breeder and coolant applications. STAR comprises a multi-room complex with operations segregated to permit both tritium and non-tritium activities in separately ventilated rooms. Tritium inventory in STAR is limited to 15,000 Ci to maintain its classification as a Radiological Facility. Experiments with tritium are typically conducted in glovebox environments. Key components of the tritium infrastructure have been installed and tested. This includes the following subsystems: (1) a tritium Storage and Assay System (SAS) that uses two 50-g depleted uranium beds for tritium storage and PVT/beta-scintillation analyses for tritium accountability measurements, (2) a Tritium Cleanup System (TCS) that uses catalytic oxidation and molecular sieve water absorption to remove tritiated species from glovebox atmosphere gases and gaseous effluents from experiment and process systems, and (3) tritium monitoring instrumentation for room air, glovebox atmosphere and stack effluent tritium concentration measurements. Integration of the tritium infrastructure subsystems with the experimental and

  14. Conceptual design of an emergency tritium clean-up system

    Energy Technology Data Exchange (ETDEWEB)

    Muller, M.E.

    1978-01-01

    The Los Alamos Scientific Laboratory (LASL) has been selected by the Department of Energy (DOE) to design, build, and operate a facility to demonstrate the operability of the tritium-related subsystems that would be required to successfully develop fusion reactor systems. An emergency tritium clean-up subsystem (ETC) for this facility will be designed to remove tritium from the cell atmosphere if an accident causes the primary and secondary tritium containment to be breached. Conceptually, the ETC will process cell air at the rate of 0.65 actual m/sup 3//s and will achieve an overall decontamination factor of 10/sup 6/ per tritium oxide (T/sub 2/O). Following the maximum credible release of 100 g of tritium, the ETC will restore the cell to opertional status within 24 h without a significant release of tritium to the environment.

  15. Radionuclide Basics: Tritium

    Science.gov (United States)

    Tritium is a hydrogen atom that has two neutrons in the nucleus and one proton. It is radioactive and behaves like other forms of hydrogen in the environment. Tritium is produced naturally in the upper atmosphere and as a byproduct of nuclear fission.

  16. Tritium fuel cycle modeling and tritium breeding analysis for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Hongli; Pan, Lei; Lv, Zhongliang; Li, Wei; Zeng, Qin, E-mail: zengqin@ustc.edu.cn

    2016-05-15

    Highlights: • A modified tritium fuel cycle model with more detailed subsystems was developed. • The mean residence time method applied to tritium fuel cycle calculation was updated. • Tritium fuel cycle analysis for CFETR was carried out. - Abstract: Attaining tritium self-sufficiency is a critical goal for fusion reactor operated on the D–T fuel cycle. The tritium fuel cycle models were developed to describe the characteristic parameters of the various elements of the tritium cycle as a tool for evaluating the tritium breeding requirements. In this paper, a modified tritium fuel cycle model with more detailed subsystems and an updated mean residence time calculation method was developed based on ITER tritium model. The tritium inventory in fueling system and in plasma, supposed to be important for part of the initial startup tritium inventory, was considered in the updated mean residence time method. Based on the model, the tritium fuel cycle analysis of CFETR (Chinese Fusion Engineering Testing Reactor) was carried out. The most important two parameters, the minimum initial startup tritium inventory (I{sub m}) and the minimum tritium breeding ratio (TBR{sub req}) were calculated. The tritium inventories in steady state and tritium release of subsystems were obtained.

  17. Tritium technology. A Canadian overview

    Energy Technology Data Exchange (ETDEWEB)

    Hemmings, R.L. [Canatom NPM (Canada)

    2002-10-01

    An overview of the various tritium research and operational activities in Canada is presented. These activities encompass tritium processing and recovery, tritium interactions with materials, and tritium health and safety. Many of these on-going activities form a sound basis for the tritium use and handling aspects of the ITER project. Tritium management within the CANDU heavy water reactor, associated detritiation facilities, research and development facilities, and commercial industry and improving the understanding of tritium behaviour in humans and the environment remain the focus of a long-standing Canadian interest in tritium. While there have been changes in the application of this knowledge and experience over time, the operating experience and the supporting research and development continue to provide for improved plant and facility operations, an improved understanding of tritium safety issues, and improved products and tools that facilitate tritium management. (author)

  18. Problems of anthropogenic tritium limitation

    Directory of Open Access Journals (Sweden)

    Kochetkov О.A.

    2013-12-01

    Full Text Available This article contains the current situation in respect to the environmental concentrations of anthropogenic and natural tritium. There are presented and analyzed domestic standards for НТО of all Radiation Safety Standards (NRB, as well as the regulations analyzed for tritium in drinking water taken in other countries today. This article deals with the experience of limitation of tritium and focuses on the main problem of rationing of tritium — rationing of organically bound tritium.

  19. Tritium measurement technique using ``in-bed`` calorimetry

    Energy Technology Data Exchange (ETDEWEB)

    Klein, J.E.; Mallory, M.K.; Nobile, A. Jr.

    1991-12-31

    One of the new technologies that has been introduced to the Savannah River Site (SRS) is the production scale use of metal hydride technology to store, pump, and compress hydrogen isotopes. For tritium stored in metal hydride storage beds, a unique relationship does not exist between the amount of tritium in the bed and the pressure-volume-temperature properties of the hydride material. Determining the amount of tritium in a hydride bed after desorbing the contents of the bed to a tank and performing pressure, volume, temperature, and composition (PVTC) measurements is not practical due to long desorption/absorption times and the inability to remove tritium ``heels`` from the metal hydride materials under normal processing conditions. To eliminate the need to remove tritium from hydride storage beds for measurement purposes, and ``in-bed`` tritium calorimetric measurement technique has been developed. The steady-state temperature rise of a gas stream flowing through a jacketed metal hydride storage bed is measured and correlated with power input to electric heaters used to simulate the radiolytic power generated by the decay of tritium to {sup 3}He. Temperature rise results for prototype metal hydride storage beds and the effects of using different gases in the bed are shown. Linear regression results shows that for 95% confidence intervals, temperature rise measurements can be obtained in 14 hours and have an accuracy of {plus_minus}1.6% of a tritium filled hydride storage bed.

  20. Tritium profiles in tiles from the first wall of fusion machines and techniques for their detritiation

    Energy Technology Data Exchange (ETDEWEB)

    Penzhorn, R.-D.; Bekris, N.; Hellriegel, W.; Noppel, H.-E.; Naegele, W.; Ziegler, H.; Rolli, R.; Werle, H.; Haigh, A.; Peacock, A

    2000-06-01

    Tritium profiles on a TFTR graphite tile exposed to D-D plasmas and a JET graphite tile from the first tritium campaigns were examined by full combustion, thermogravimetry and thermal desorption. Combustion measurements revealed that >98.9% of the tritium is trapped in a layer <50 {mu}m thick, the remainder being spread throughout the tile. The tritium distribution on the tile surface is not homogeneous. A significant fraction resides in the gaps between tiles. Graphite disks from the plasma-exposed side of JET tiles heated up to 1100 deg. C under a helium stream containing 0.1% hydrogen showed the highest tritium release rate at {approx}850 deg. C. The agreement between tritium measurements by full combustion and thermal release was reasonably good. Tritium on graphite tiles was released to >95% under a stream of moist air at about 400 deg. C. A large fraction of tritium can be removed from the tile surface with adhesive tape.

  1. Tritium waste package

    Science.gov (United States)

    Rossmassler, Rich; Ciebiera, Lloyd; Tulipano, Francis J.; Vinson, Sylvester; Walters, R. Thomas

    1995-01-01

    A containment and waste package system for processing and shipping tritium xide waste received from a process gas includes an outer drum and an inner drum containing a disposable molecular sieve bed (DMSB) seated within outer drum. The DMSB includes an inlet diffuser assembly, an outlet diffuser assembly, and a hydrogen catalytic recombiner. The DMSB absorbs tritium oxide from the process gas and converts it to a solid form so that the tritium is contained during shipment to a disposal site. The DMSB is filled with type 4A molecular sieve pellets capable of adsorbing up to 1000 curies of tritium. The recombiner contains a sufficient amount of catalyst to cause any hydrogen add oxygen present in the process gas to recombine to form water vapor, which is then adsorbed onto the DMSB.

  2. Tritium protective clothing

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, T. P.; Easterly, C. E.

    1979-06-01

    Occupational exposures to radiation from tritium received at present nuclear facilities and potential exposures at future fusion reactor facilities demonstrate the need for improved protective clothing. Important areas relating to increased protection factors of tritium protective ventilation suits are discussed. These areas include permeation processes of tritium through materials, various tests of film permeability, selection and availability of suit materials, suit designs, and administrative procedures. The phenomenological nature of film permeability calls for more standardized and universal test methods, which would increase the amount of directly useful information on impermeable materials. Improvements in suit designs could be expedited and better communicated to the health physics community by centralizing devlopmental equipment, manpower, and expertise in the field of tritium protection to one or two authoritative institutions.

  3. PRODUCTION OF TRITIUM

    Science.gov (United States)

    Jenks, G.H.; Shapiro, E.M.; Elliott, N.; Cannon, C.V.

    1963-02-26

    This invention relates to a process for the production of tritium by subjecting comminuted solid lithium fluoride containing the lithium isotope of atomic mass number 6 to neutron radiation in a self-sustaining neutronic reactor. The lithium fiuoride is heated to above 450 deg C. in an evacuated vacuum-tight container during radiation. Gaseous radiation products are withdrawn and passed through a palladium barrier to recover tritium. (AEC)

  4. Hazards of exposure to tritium and tritium oxide

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, R.C.; Kornberg, H.A.

    1954-01-01

    Experimental data pertinent to the evaluation of hazards involved in the exposure of personnel to tritium and tritium oxide are reviewed. Conclusions are drawn and recommendations made with regard to the control of these hazards.

  5. Tritium application: self-luminous glass tube(SLGT)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.; Lee, S.K.; Chung, E.S.; Kim, K.S.; Kim, W.S. [Nuclear Power Lab., Korea Electric Power Research Inst. (KEPRI), Daejeon (Korea); Nam, G.J. [Engineering Information Technology Center, Inst. for Advanced Engineering (IAE), Kyonggi-do (Korea)

    2005-07-01

    To manufacture SLGTs (self-luminous glass tubes), 4 core technologies are needed: coating technology, tritium injection technology, laser sealing/cutting technology and tritium handling technology. The inside of the glass tubes is coated with greenish ZnS phosphor particles with sizes varying from 4{proportional_to}5 [{mu}m], and Cu, and Al as an activator and a co-dopant, respectively. We also found that it would be possible to produce a phosphor coated glass tube for the SLGT using the well established cold cathode fluorescent lamp (CCFL) bulb manufacturing technology. The conceptual design of the main process loop (PL) is almost done. A delicate technique will be needed for the sealing/cutting of the glass tubes. Instead of the existing torch technology, a new technology using a pulse-type laser is under investigation. The design basis of the tritium handling facilities is to minimize the operator's exposure to tritium uptake and the emission of tritium to the environment. To fulfill the requirements, major tritium handling components are located in the secondary containment such as the glove boxes (GBs) and/or the fume hoods. The tritium recovery system (TRS) is connected to a GB and PL to minimize the release of tritium as well as to remove the moisture and oxygen in the GB. (orig.)

  6. ESTABLISHMENT OF A SEVERE ACCIDENT MITIGATION STRATEGY FOR AN SBO AT WOLSONG UNIT 1 NUCLEAR POWER PLANT

    Directory of Open Access Journals (Sweden)

    SUNGMIN KIM

    2013-08-01

    Full Text Available During a station blackout (SBO, the initiating event is a loss of Class IV and Class III power, causing the loss of the pumps, used in systems such as the primary heat transporting system (PHTS, moderator cooling, shield cooling, steam generator feed water, and re-circulating cooling water. The reference case of the SBO case does not credit any of these active heat sinks, but only relies on the passive heat sinks, particularly the initial water inventories of the PHTS, moderator, steam generator secondary side, end shields, and reactor vault. The reference analysis is followed by a series of sensitivity cases assuming certain system availabilities, in order to assess their mitigating effects. This paper also establishes the strategies to mitigate SBO accidents. Current studies and strategies use the computer code of the Integrated Severe Accident Analysis Code (ISAAC for Wolsong plants. The analysis results demonstrate that appropriate strategies to mitigate SBO accidents are established and, in addition, the symptoms of the SBO processes are understood.

  7. Monitoring of tritium

    Science.gov (United States)

    Corbett, James A.; Meacham, Sterling A.

    1981-01-01

    The fluid from a breeder nuclear reactor, which may be the sodium cooling fluid or the helium reactor-cover-gas, or the helium coolant of a gas-cooled reactor passes over the portion of the enclosure of a gaseous discharge device which is permeable to hydrogen and its isotopes. The tritium diffused into the discharge device is radioactive producing beta rays which ionize the gas (argon) in the discharge device. The tritium is monitored by measuring the ionization current produced when the sodium phase and the gas phase of the hydrogen isotopes within the enclosure are in equilibrium.

  8. Tritium operating experience at the tritium laboratory Karlsruhe

    Energy Technology Data Exchange (ETDEWEB)

    Doerr, L.; Bekris, N.; Besserer, U.; Glugla, M.; Hellriegel, W.; Penzhorn, R.D.; Rohrig, H.D.; Schubert, K.; Vollmer, T.; Wendel, J. [Karlsruhe Research Centre, Tritium Laboratory (Germany)

    1998-07-01

    The Tritium Laboratory Karlsruhe began operations with gram amounts of tritium in March 1995. Since then, the experimental facilities CAPRICE and PETRA have been routinely in operation. New experimental activities include the analysis of tritium in first wall materials of fusion devices and the development of methods for the detritiation of graphite and carbon fibre composite tiles. The experience gained with Tritium Retention Systems, with the Tritium Transfer System, with portable uranium getter beds and in this context with tritium accountancy is reported. The incorporation of a new Pd packed column into the Isotope Separation System, the increase in storage capacity of the Tritium Storage System, the improvements of the analytical instrumentation and some repair activities are also described. (authors)

  9. Tritium retention in TFTR

    Energy Technology Data Exchange (ETDEWEB)

    Dylla, H.F.; Wilson, K.L. (eds.)

    1988-04-01

    This report discusses the materials physics related to D-T operation in TFTR. Research activities are described pertaining to basic studies of hydrogenic retention in graphite, hydrogen recycling phenomena, first-wall and limiter conditioning, surface analysis of TFTR first-wall components, and estimates of the tritium inventory.

  10. Pebble fabrication and tritium release properties of an advanced tritium breeder

    Energy Technology Data Exchange (ETDEWEB)

    Hoshino, Tsuyoshi, E-mail: hoshino.tsuyoshi@jaea.go.jp [Breeding Functional Materials Development Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-166 Obuch, Omotedate, Rokkasho-mura, Kamikita-gun, Aomori 039-3212 (Japan); Edao, Yuki [Tritium Technology Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-4 Shirakata, Shirane, Tokai-mura, Naka-gun, Ibaraki 319-1195 (Japan); Kawamura, Yoshinori [Blanket Technology Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Ochiai, Kentaro [BA Project Coordination Group, Department of Fusion Power Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-166 Obuch, Omotedate, Rokkasho-mura, Kamikita-gun, Aomori 039-3212 (Japan)

    2016-11-01

    Highlights: • Li{sub 2}TiO{sub 3} with excess Li (Li{sub 2+x}TiO{sub 3+y}) pebble as an advanced tritium breeders was fabricated using emulsion method. • Grain size of Li{sub 2+x}TiO{sub 3+y} pebbles was controlled to be less than 5 μm. • Li{sub 2+x}TiO{sub 3+y} pebbles exhibited good tritium release properties similar to that of Li{sub 2}TiO{sub 3} pebbles. - Abstract: Li{sub 2}TiO{sub 3} with excess Li (Li{sub 2+x}TiO{sub 3+y}) has been developed as an advanced tritium breeder. With respect to the tritium release characteristics of the blanket, the optimum grain size after sintering was less than 5 μm. Therefore, an emulsion method was developed to fabricate pebbles with this target grain size. The predominant factor affecting grain growth was assumed to be the presence of binder in the gel particles; this remaining binder was hypothesized to react with the excess Li, thereby generating Li{sub 2}CO{sub 3}, which promotes grain growth. To inhibit the generation of Li{sub 2}CO{sub 3}, calcined Li{sub 2+x}TiO{sub 3+y} pebbles were sintered under vacuum and subsequently under a 1% H{sub 2}–He atmosphere. The average grain size of the sintered Li{sub 2+x}TiO{sub 3+y} pebbles was less than 5 μm. Furthermore, the tritium release properties of Li{sub 2+x}TiO{sub 3+y} pebbles were evaluated, and deuterium–tritium (DT) neutron irradiation experiments were performed at the Fusion Neutronics Source facility in the Japan Atomic Energy Agency. To remove the tritium produced by neutron irradiation, 1% H{sub 2}–He purge gas was passed through the Li{sub 2+x}TiO{sub 3+y} pebbles. The Li{sub 2+x}TiO{sub 3+y} pebbles exhibited good tritium release properties, similar to those of Li{sub 2}TiO{sub 3} pebbles. In particular, the released amount of tritiated hydrogen gas for easier tritium handling was greater than the released amount of tritiated water.

  11. Tritium well depth, tritium well time and sponge mechanism for reducing tritium retention

    Science.gov (United States)

    Deng, B. Q.; Li, Z. X.; Li, C. Y.; Feng, K. M.

    2011-07-01

    New simulation results are predicted in a fusion reactor operation process. They are somewhat similar to, but quite different from, the xenon poisoning effects resulting from fission-produced iodine during the restart-up process of a fission reactor. We obtained completely new results of tritium well depth and tritium well time in magnetic confinement fusion energy research area. This study is carried out to investigate the following: what will be the least amount of tritium storage required to start up a fusion reactor and how long the fusion reactor needs to be operated for achieving the tritium break-even during the initial start-up phase due to the finite tritium-breeding time, which is dependent on the tritium breeder, specific structure of the breeding zone, layout of the coolant flow pipes, tritium recovery scheme and applied extraction process, the tritium retention of plasma facing component (PFC) and other reactor components, unrecoverable tritium fraction in the breeder, leakage to the inertial gas container and the natural radioactive decay time constant. We describe these new issues and answer these problems by setting up and solving a set of equations, which are described by a dynamic subsystem model of tritium inventory evolution in a fusion experimental breeder (FEB). Reasonable results are obtained using our simulation model. It is found that the tritium well depth is about 0.319 kg and the tritium well time is approximately 235 full power operation days for the reference case of the designed FEB configuration, and it is also found that after one-year operation the tritium storage reaches 0.767 kg, which is more than the least amount of tritium storage required to start up another FEB-like fusion reactor. The results show that the tritium retention in the PFC is equivalent to 11.9% of tritium well depth that is fairly consistent with the result of 10-20% deduced from the integrated particle balance of European tokamaks. Based on our experimental

  12. Deuterium-tritium fusion reactors without external tritium breeding

    Energy Technology Data Exchange (ETDEWEB)

    Eliezer, S. [Soreq Nucl. Res. Center, Yavne (Israel). Dept. of Plasma Phys.]|[Instituto de Fusion Nuclear, Jose Gutierrez Abascal, 2, Madrid (Spain); Henis, Z. [Soreq Nucl. Res. Center, Yavne (Israel). Dept. of Plasma Phys.; Martinez-Val, J.M. [Instituto de Fusion Nuclear, Jose Gutierrez Abascal, 2, Madrid (Spain); Piera, M. [Instituto de Fusion Nuclear, Jose Gutierrez Abascal, 2, Madrid (Spain)]|[UNED, Madrid (Spain)

    1998-07-06

    An inherent property of deuterium fusion burn-up equations is presented, due to which deuterium-tritium reactions can be exploited without needing tritium breeding in external blankets. A small amount of tritium is added to the deuterium plasma in order to trigger ignition at less than 10 keV, and the same amount of tritium is found in the debris of the burnt-up plasma if the burning temperature is higher than 200 keV. Plasma parameters to exploit this property are very similar to those of inertial fusion confinement. Tritium inventory in a reactor would thus be reduced to a minimum value, because the initial composition of the fuel would be of the type DT{sub x}, with x{approx}0.02, and tritium would immediately be reprocessed to fabricate new fuel. (orig.) 13 refs.

  13. Labelling of benzocaine with tritium

    Energy Technology Data Exchange (ETDEWEB)

    Malik, Sohail (Washington Univ., Seattle, WA (United States))

    1994-10-01

    A convenient method is described to label a local anesthetic, benzocaine, with tritium. The bromoester of para-aminobenzoic acid (PABA) was prepared from para-nitrotoluene and was reduced with tritium. The generation of isotopic hydrogen and labelling of benzocaine was achieved in one-step. A mixture of sodium borohydride (NaB[sup 3]H[sub 4]) with cobalt (II) chloride was used to generate tritium gas. 5% Pd/C was used as a catalyst. This constitutes the first report of tritium labelled benzocaine. (author).

  14. JET experiments with tritium and deuterium–tritium mixtures

    NARCIS (Netherlands)

    Horton, L.; Batistoni, P.; Boyer, H.; Challis, C.; Ciric, D.; Donne, A. J. H.; Eriksson, L. G.; Garcia, J.; Garzotti, L.; Gee, S.; Hobirk, J.; Joffrin, E.; Jones, T.; King, D. B.; Knipe, S.; Litaudon, X.; Matthews, G. F.; Monakhov, I.; Murari, A.; Nunes, I.; Riccardo, V.; Sips, A. C. C.; Warren, R.; Weisen, H.; Zastrow, K. D.

    2016-01-01

    Extensive preparations are now underway for an experiment in the Joint European Torus (JET) using tritium and deuterium–tritium mixtures. The goals of this experiment are described as well as the progress that has been made in developing plasma operational scenarios and physics reference pulses for

  15. Tritium Facilities Modernization and Consolidation Project Process Waste Assessment (Project S-7726)

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, R.H. [Westinghouse Savannah River Company, AIKEN, SC (United States); Oji, L.N.

    1997-11-14

    Under the Tritium Facility Modernization {ampersand} Consolidation (TFM{ampersand}C) Project (S-7726) at the Savannah River Site (SS), all tritium processing operations in Building 232-H, with the exception of extraction and obsolete/abandoned systems, will be reestablished in Building 233-H. These operations include hydrogen isotopic separation, loading and unloading of tritium shipping and storage containers, tritium recovery from zeolite beds, and stripping of nitrogen flush gas to remove tritium prior to stack discharge. The scope of the TFM{ampersand}C Project also provides for a new replacement R&D tritium test manifold in 233-H, upgrading of the 233- H Purge Stripper and 233-H/234-H building HVAC, a new 234-H motor control center equipment building and relocating 232-H Materials Test Facility metallurgical laboratories (met labs), flow tester and life storage program environment chambers to 234-H.

  16. Studying liposomes by tritium bombardment.

    Science.gov (United States)

    Kordyukova, L V; Ksenofontov, A L; Badun, G A; Baratova, L A; Shishkov, A V

    2001-12-01

    Bilayer liposomes from a mixture of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylethanolamine (DPPC: DPPE = 8:2, molar ratio) or DPPC labeled with 14C-DPPC (DPPC: 14C-DPPC) were bombarded with thermally activated tritium atoms. The tritiated liposomes were hydrolyzed by phospholipase C, and the tritium incorporation into different parts of the bilayer along its thickness was determined. The tritium flux attenuation coefficients were calculated for the headgroup (k1 = 0.176+/-0.032 A(-1)) and acylglycerol residue (k2 = 0.046+/-0.004 A(-1)) layers indicating a preferential attenuation of the tritium flux in the headgroup region and relative transparence of the membrane hydrophobic part. The finding is potentially important to apply tritium bombardment for investigation of spatial organization of transmembrane proteins in their native lipid environment.

  17. The tritium operations experience on TFTR

    Energy Technology Data Exchange (ETDEWEB)

    von Halle, A.; Gentile, C. [Princeton Univ., NJ (United States). Plasma Physics Lab.; Anderson, J.L. [Los Alamos National Lab., NM (United States)] [and others

    1994-09-01

    The Tokamak Fusion Test Reactor (TFTR) tritium gas system is administratively limited to 5 grains of tritium and provides the feedstock gas for the neutral beam and torus injection systems. Tritium operations on TFTR began with leak checking of gas handling systems, qualification of the gas injection systems, and high power plasma operations using using trace amounts of tritium in deuterium feedstock gas. Full tritium operation commenced with four highly diagnosed neutral beam pulses into a beamline calorimeter to verify planned tritium beam operating routines and to demonstrate the deuterium to tritium beam isotope exchange. Since that time, TFTR has successfully operated each of the twelve neutral beam ion sources in tritium during hundreds of tritium beam pulses and torus gas injections. This paper describes- the TFTR tritium gas handling systems and TFTR tritium operations of the gas injection systems and the neutral beam ion sources. Tritium accounting and accountability is discussed, including tritium retention issues of the torus limiters and beam impinged surfaces of the beamline components. Also included is tritium beam velocity analysis that compares the neutral beam extracted ion species composition for deuterium and tritium and that determines the extent of beam isotope exchange on subsequent deuterium and tritium beam pulses. The required modifications to TFTR operating routines to meet the US Department of Energy regulations for a low hazard nuclear facility and the problems encountered during initial tritium operations are described.

  18. Recent progress of China HCCB TBM tritium system

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Deli, E-mail: luodeli2005@hotmail.com; Huang, Guoqiang; Huang, Zhiyong; Qin, Cheng; Song, Jiangfeng; He, Kanghao; Chen, Chang’an; Zhang, Guikai; Fu, Jun; Yao, Yong; An, Yongtao

    2016-11-01

    Highlights: • Comparing with our previous design, improvements have been made according to the up-to-date experiments and simulations: (1) The palladium alloy tube in the previous design is now removed in the upgraded one and the cryogenic molecular sieve bed is replaced by the getter bed to reduce tritium inventory; (2) Hot metal reduction bed is relocated from T-Plant to Port Cell; (3) TAS is now integrated into TES. • The proposed coolant purification is based on catalytic oxidation and molecular sieve bed adsorption for tritium removal, as well as hot metal adsorption for the elimination of non-tritium gaseous impurities. Some operation parameters and functional components are improved. The interface with the high pressure HCS and other plant systems was incorporated taking into account of the requirement from the ITER port management group meetings. - Abstract: China tritium system including Tritium Extraction System (TES) with Tritium Accountancy System (TAS) integrated in and Coolant Purification System (CPS), which is subordinate to Helium Coolant System (HCS), is of great importance for China Helium Cooled Ceramic Breeder Test Blanket Module (CN HCCB TBM). The purge gas (99.9% He + 0.1% H{sub 2}) carrying Q{sub 2}O (Q = H, D, T) and Q{sub 2} from Li{sub 4}SiO{sub 4} ceramic breeder flows through the reduction bed where Q{sub 2}O is reduced into Q{sub 2} and then absorbed by the getter bed. The HT/HTO ratio and the total tritium are determined by TAS. Catalytic oxidation combines with molecular sieve absorption and hot metal purification are applied to remove tritium and other impurities in helium coolant. A loop including depressurization, helium-sweeping assisted thermal desorption, and cold trapping for the regeneration of saturated molecular sieve bed until the concentration of the desorbed Q{sub 2}O is reduced to an acceptable level. This paper introduces the recent progress of China tritium system including updated conceptual designs of TES and

  19. A decade of tritium technology development and operation at the tritium laboratory Karlsruhe

    Energy Technology Data Exchange (ETDEWEB)

    Doerr, L.; Besserer, U.; Bekris, N.; Bornschein, B.; Caldwell-Nichols, C.; Demange, D.; Cristescu, I.; Cristescu, I. R.; Glugla, M.; Hellriegel, G.; Schaefer, P.; Weite, S.; Wendel, J. [Forschungszentrum Karlsruhe, Inst. for Technical Physics, Tritium Laboratory Karlsruhe, P.O. Box 3640, D-76021 Karlsruhe (Germany)

    2008-07-15

    The Tritium Laboratory Karlsruhe (TLK) has been designed to handle relevant amounts of tritium for the development of tritium technology for fusion reactors. This paper describes the tritium technology development and experience gained during the upgrade of facilities, interventions, replacement of failed components and operation of the TLK since its commissioning with tritium in 1994. (authors)

  20. JET experiments with tritium and deuterium–tritium mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Horton, Lorne, E-mail: Lorne.Horton@jet.uk [JET Exploitation Unit, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); European Commission, B-1049 Brussels (Belgium); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Batistoni, P. [Unità Tecnica Fusione - ENEA C. R. Frascati - via E. Fermi 45, Frascati (Roma), 00044, Frascati (Italy); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Boyer, H.; Challis, C.; Ćirić, D. [CCFE, Culham Science Centre, Abingdon OX14 3DB, Oxon (United Kingdom); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Donné, A.J.H. [EUROfusion Programme Management Unit, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); FOM Institute DIFFER, PO Box 1207, NL-3430 BE Nieuwegein (Netherlands); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Eriksson, L.-G. [European Commission, B-1049 Brussels (Belgium); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Garcia, J. [CEA, IRFM, F-13108 Saint Paul Lez Durance (France); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Garzotti, L.; Gee, S. [CCFE, Culham Science Centre, Abingdon OX14 3DB, Oxon (United Kingdom); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Hobirk, J. [Max-Planck-Institut für Plasmaphysik, D-85748 Garching (Germany); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Joffrin, E. [CEA, IRFM, F-13108 Saint Paul Lez Durance (France); EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); and others

    2016-11-01

    Highlights: • JET is preparing for a series of experiments with tritium and deuterium–tritium mixtures. • Physics objectives include integrated demonstration of ITER operating scenarios, isotope and alpha physics. • Technology objectives include neutronics code validation, material studies and safety investigations. • Strong emphasis on gaining experience in operation of a nuclear tokamak and training scientists and engineers for ITER. - Abstract: Extensive preparations are now underway for an experiment in the Joint European Torus (JET) using tritium and deuterium–tritium mixtures. The goals of this experiment are described as well as the progress that has been made in developing plasma operational scenarios and physics reference pulses for use in deuterium–tritium and full tritium plasmas. At present, the high performance plasmas to be tested with tritium are based on either a conventional ELMy H-mode at high plasma current and magnetic field (operation at up to 4 MA and 4 T is being prepared) or the so-called improved H-mode or hybrid regime of operation in which high normalised plasma pressure at somewhat reduced plasma current results in enhanced energy confinement. Both of these regimes are being re-developed in conjunction with JET's ITER-like Wall (ILW) of beryllium and tungsten. The influence of the ILW on plasma operation and performance has been substantial. Considerable progress has been made on optimising performance with the all-metal wall. Indeed, operation at the (normalised) ITER reference confinement and pressure has been re-established in JET albeit not yet at high current. In parallel with the physics development, extensive technical preparations are being made to operate JET with tritium. The state and scope of these preparations is reviewed, including the work being done on the safety case for DT operation and on upgrading machine infrastructure and diagnostics. A specific example of the latter is the planned calibration at

  1. Development of Tritium Plant System for Fusion Reactors - Achievements in the 14-year US-Japan Collaboration -

    Science.gov (United States)

    Nishi, Masataka; Yamanishi, Toshihiko; Shu, Wataru

    Fuel processing technology and tritium safe-handling technology have been developed through US/DOE-JAERI collaboration from 1987 till 2001, and the technologies to construct the tritium plant system of ITER have been made currently available. This paper overviews the major achievements of this collaborative researches over fourteen years, which were performed mainly at the Tritium Systems Test Assembly (TSTA) of the Los Alamos National Laboratory (LANL). The tritium plant system consists mainly of a fuel processing system, which includes a fuel cycle system and a blanket tritium recovery system, and a tritium confinement/removal system. The fuel cycle system recovers fuel from plasma exhaust gas and recycles it. In the collaboration, major key components and subsystems were developed, and the performance of the integrated system was successfully demonstrated over its one-month operation in which plasma exhaust model gas was processed at a processing rate of up to 1/6 level of the ITER. The technological basis of the fuel cycle system was thus established. Blanket tritium recovery technology was also successfully demonstrated using the TSTA system. Through the successful safeoperation of the TSTA, reliability of tritium confinement/removal system was verified basically. In addition, much data to confirm or enhance safety were accumulated by experiments such as intentional tritium release in a large room. Furthermore,distribution of tritium contamination in the vacuum vessel of the TFTR, a large tokamak of the Princeton Plasma Physics Laboratory (PPPL), was investigated in this work.

  2. Tritium research activities in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Ki Jung, E-mail: kjjung@nfri.re.kr [National Fusion Research Institute, Yusung-gu, Daejeon 305-333 (Korea, Republic of); Yun, Sei-Hun, E-mail: shyun@nfri.re.kr [National Fusion Research Institute, Yusung-gu, Daejeon 305-333 (Korea, Republic of); Chang, Min Ho; Kang, Hyun-Goo; Chung, Dongyou; Cho, Seungyon; Lee, Hyeon Gon [National Fusion Research Institute, Yusung-gu, Daejeon 305-333 (Korea, Republic of); Chung, Hongsuk; Choi, Woo-Seok [Korea Atomic Energy Research Institute, Yusung-gu, Daejeon 305-353 (Korea, Republic of); Song, Kyu-Min; Moon, Chang-Bae [Korea Hydro & Nuclear Power Central Research Institute, Yusung-gu, Daejeon 305-343 (Korea, Republic of); Lee, Euy Soo [Dongguk University, Jung-gu, Seoul, 100-715 (Korea, Republic of); Cho, Jungho; Kim, Dong-Sun [Kongju National University, Cheonan, Chungnam, 330-717 (Korea, Republic of); Moon, Hung-Man [Daesung Industrial Gases Co., Ltd., Danwon-gu, Ansan-si, Gyeonggi-do, 425-090 (Korea, Republic of); Noh, Seung Jeong [Dankook University, Suji-gu, Yongin-si, Gyeonggi-do, 448-701 (Korea, Republic of); Ju, Hyunchul [Inha University, Nam-gu, Incheon, 402-751 (Korea, Republic of); Hong, Tae-Whan [Korea National University of Transportation, Chungju, Chungbuk, 380-702 (Korea, Republic of)

    2016-12-15

    Highlights: • NFRI, KAERI and KHNP CRI are major leading group for the ITER tritium SDS design; studying engineering, simulation of hydride bed, risk analysis (on safety, HAZOP), basic study, control logic & sequential operation, and others. KHNP has WTRF which gives favorable experiences for collaboration researchers. • Supplementary research partners: Five Universities (Dongguk University and POSTECH, Inha University, Dankook University, Korea National Transport University, and Kongju National University) and one industrial company (Daesung Industrial Gases Co., Ltd.); studying on basic and engineering, programming & simulation on the various topics for ITER tritium SDS, TEP, ISS, ADS, and etc. - Abstract: Major progress in tritium research in the Republic of Korea began when Korea became responsible for ITER tritium Storage and Delivery System (SDS) procurement package which is part of the ITER Fuel Cycle. To deliver the tritium SDS package, a variety of research institutes, universities and industry have respectively taken roles and responsibilities in developing technologies that have led to significant progress. This paper presents the current work and status of tritium related technological research and development (R&D) in Korea and introduces future R&D plans in the area of fuel cycle systems for fusion power generation.

  3. How tritium illuminates catchment structure

    Science.gov (United States)

    Stewart, M.; Morgenstern, U.; McDonnell, J.

    2012-04-01

    Streams contain water which has taken widely-varying times to pass through catchments, and the distribution of ages is likely to change with the flow. Part of the water has 'runoff' straight to the stream with little delay, other parts are more delayed and some has taken years (in some cases decades) to traverse the deeper regolith or bedrock of the catchment. This work aims to establish the significance of the last component, which is important because it can cause catchments to have long memories of contaminant inputs (e.g. nitrate). Results of tritium studies on streams world-wide were accessed from the scientific literature. Most of the studies assumed that there were just two age-components present in the streams (i.e. young and old). The mean ages and proportions of the components were found by fitting simulations to tritium data. It was found that the old component in streams was substantial (average was 50% of the annual runoff) and had considerable age (average mean age was 10 years) (Stewart et al., 2010). Use of oxygen-18 or chloride variations to estimate streamflow mean age usually does not reveal the age or size of this old component, because these methods cannot detect water older than about four years. Consequently, the use of tritium has shown that substantial parts of streamflow in headwater catchments are older than expected, and that deep groundwater plays an active and sometimes even a dominant role in runoff generation. Difficulties with interpretation of tritium in streams in recent years due to interference from tritium due to nuclear weapons testing are becoming less serious, because very accurate tritium measurements can be made and there is now little bomb-tritium remaining in the atmosphere. Mean ages can often be estimated from single tritium measurements in the Southern Hemisphere, because there was much less bomb-tritium in the atmosphere. This may also be possible for some locations in the Northern Hemisphere. Age determination on

  4. Overview of Recent Tritium Experiments in TPE

    Energy Technology Data Exchange (ETDEWEB)

    Masashi Shimada; T. Otsuka; R. J. Pawelko; P. Calderoni; J. P. Sharpe

    2010-10-01

    Tritium retention in plasma-facing components influences the design, operation, and lifetime of fusion devices such as ITER. Most of the retention studies were carried out with the use of either hydrogen or deuterium. Tritium Plasma Experiment is a unique linear plasma device that can handle radioactive fusion fuel of tritium, toxic material of beryllium, and neutron-irradiated material. A tritium depth profiling method up to mm range was developed using a tritium imaging plate and a diamond wire saw. A series of tritium experiments (T2/D2 ratio: 0.2 and 0.5 %) was performed to investigate tritium depth profiling in bulk tungsten, and the results shows that tritium is migrated into bulk tungsten up to mm range.

  5. Concentration profiles of tritium penetrated into concrete

    Energy Technology Data Exchange (ETDEWEB)

    Takata, H.; Furuichi, K.; Nishikawa, M.; Fukada, S.; Katayama, K.; Takeishi, T. [Interdisciplinary Graduate School of Engineering Science, Kyushu Univ., Hakozaki 6-10-1, Higashi-ku, Fukuoka 812-8581 (Japan); Kobayashi, K.; Hayashi, T. [Japan Atomic Energy Agency, Tokai-mura 319-11, Ibaraki 319-1195 (Japan); Namba, H. [Shimizu Corporation, No.2-3, Shibaural-chome, Minato-ku, Tokyo 105-8007 (Japan)

    2008-07-15

    Concentration profiles of tritium in cement paste, mortar and concrete were measured after exposure to tritiated water vapor for a given time. Tritium penetrated a distance of about 5 cm from the exposed surface during an exposure of 6 months. The model of tritium behavior in concrete materials reported by the present authors was developed in this study with the consideration of the effects of sand and aggregate on both the diffusion coefficient of tritiated water vapor and the isotope exchange capacity. Predictive calculations based on the tritium transport model were also carried out in some situations of tritium leakage. The results of the calculations show that a large amount of tritium will be trapped in the concrete walls, and the trapped tritium will be gradually released back to the tritium handling room over the time of months to years even after the decontamination of the room is completed. (authors)

  6. Tritium calorimeter setup and operation

    CERN Document Server

    Rodgers, D E

    2002-01-01

    The LBNL tritium calorimeter is a stable instrument capable of measuring tritium with a sensitivity of 25 Ci. Measurement times range from 8-hr to 7-days depending on the thermal conductivity and mass of the material being measured. The instrument allows accurate tritium measurements without requiring that the sample be opened and subsampled, thus reducing personnel exposure and radioactive waste generation. The sensitivity limit is primarily due to response shifts caused by temperature fluctuation in the water bath. The fluctuations are most likely a combination of insufficient insulation from ambient air and precision limitations in the temperature controller. The sensitivity could probably be reduced to below 5 Ci if the following improvements were made: (1) Extend the external insulation to cover the entire bath and increase the top insulation. (2) Improve the seal between the air space above the bath and the outside air to reduce evaporation. This will limit the response drift as the water level drops. (...

  7. Design of the Target Fabrication Tritium Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sherohman, J.W.; Roberts, D.H.; Levine, B.H.

    1982-05-05

    The design of the Target Fabrication Tritium Laboratory for deuterium-tritium fuel processing for laser fusion targets has been accomplished with the intent of providing redundant safeguard systems. The design of the tritium laboratory is based on a combination of tritium handling techniques that are currently used by experienced laboratories. A description of the laboratory in terms of its interrelated processing systems is presented to provide an understanding of the design features for safe operation.

  8. Tritium protection at the Savannah River Plant

    Energy Technology Data Exchange (ETDEWEB)

    Reinig, W.C.

    1988-01-01

    The Savannah River Plant produces tritium for the nation's defense. In addition to the planned production, unwanted tritium results from neutron irradiation of the heavy water moderator in the plant's reactors. During the past 30 years, continual improvements have been made in methods to protect the large workforce at the reactors and at the tritium facility from the potential hazards of tritium. This paper describes the current protection program.

  9. 10 CFR 30.55 - Tritium reports.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Tritium reports. 30.55 Section 30.55 Energy NUCLEAR..., Inspections, Tests, and Reports § 30.55 Tritium reports. (a)-(b) (c) Except as specified in paragraph (d) of this section, each licensee who is authorized to possess tritium shall report promptly to the...

  10. EFFECTS OF TRITIUM GAS EXPOSURE ON POLYMERS

    Energy Technology Data Exchange (ETDEWEB)

    Clark, E.; Fox, E.; Kane, M.; Staack, G.

    2011-01-07

    Effects of tritium gas exposure on various polymers have been studied over the last several years. Despite the deleterious effects of beta exposure on many material properties, structural polymers continued to be used in tritium systems. Improved understanding of the tritium effects will allow more resistant materials to be selected. Currently polymers find use mainly in tritium gas sealing applications (eg. valve stem tips, O-rings). Future uses being evaluated including polymeric based cracking of tritiated water, and polymer-based sensors of tritium.

  11. Weapons engineering tritium facility overview

    Energy Technology Data Exchange (ETDEWEB)

    Najera, Larry [Los Alamos National Laboratory

    2011-01-20

    Materials provide an overview of the Weapons Engineering Tritium Facility (WETF) as introductory material for January 2011 visit to SRS. Purpose of the visit is to discuss Safety Basis, Conduct of Engineering, and Conduct of Operations. WETF general description and general GTS program capabilities are presented in an unclassified format.

  12. Evaluation and mitigation of tritium memory in detritiation dryers

    Energy Technology Data Exchange (ETDEWEB)

    Malara, C.; Ricapito, I. [MEGIT Gas Separation Purification and Recovery, Cocquio Trevisago (Italy); Edwards, R.A.H.; Toci, F. [European Commission, Joint Research Centre, 21027 Ispra, VA (Italy)

    1999-07-01

    In atmospheric detritiation, and other tritium processes, tritium is adsorbed on zeolites (molecular sieves) in the form of tritiated water. Regeneration removes almost all the physically adsorbed water, but a proportion remains permanently in the zeolite and binder structure as chemically bound water or hydroxyl groups. Exchange between adsorbed water and bound water means that tritiated water is retained in the structure after regeneration. At the end of its life, the zeolite therefore constitutes a tritiated waste. Furthermore, if an atmosphere detritiation dryer (ADD) gets highly contaminated from a tritium spill, retained tritium contaminates both the small amount of vapour leaving the bed during the next drying cycle, and the water produced in the subsequent regeneration. This report first describes experiments to measure the tritiated water retained in a 5A zeolite bed after standard regeneration treatments, and then investigates strategies to mitigate the effect: more thorough regeneration and isotope swamping or elution. The effect of zeolite ageing after thermal cycling is also seen. (orig.) 12 refs.

  13. Tritium contamination and decontamination of sealing oil for vacuum pump

    Energy Technology Data Exchange (ETDEWEB)

    Takeishi, T.; Kotoh, K.; Kawabata, Y.; Tanaka, J.I. [Faculty of Engineering, Kyushu University, Nishi-ku, Fukuoka (Japan); Kawamura, S.; Iwata, M. [ATOX Co. Ltd, Technoly Development Center, Kashiwa, Chiba (Japan)

    2015-03-15

    The existence of tritium-contaminated oils from vacuum pumps used in tritium facilities, is becoming an important issue since there is no disposal way for tritiated waste oils. On recovery of tritiated water vapor in gas streams, it is well-known that the isotope exchange reaction between the gas phase and the liquid phase occurs effectively at room temperature. We have carried out experiments using bubbles to examine the tritium contamination and decontamination of a volume of rotary-vacuum-pump oil. The contamination of the pump oil was made by bubbling tritiated water vapor and tritiated hydrogen gas into the oil. Subsequently the decontamination was processed by bubbling pure water vapor and dry argon gas into the tritiated oil. Results show that the water vapor bubbling was more effective than dry argon gas. The experiment also shows that the water vapor bubbling in an oil bottle can remove and transfer tritium efficiently from the tritiated oil into another water-bubbling bottle.

  14. Tritium transport analysis for CFETR WCSB blanket

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Pinghui, E-mail: phzhao@mail.ustc.edu.cn; Yang, Wanli; Li, Yuanjie; Ge, Zhihao; Nie, Xingchen; Gao, Zhongping

    2017-01-15

    Highlights: • A simplified tritium transport model for CFETR WCSB blanket was developed. • Tritium transport process in CFETR WCSB blanket was analyzed. • Sensitivity analyses of tritium transport parameters were carried out. - Abstract: Water Cooled Solid Breeder (WCSB) blanket was put forward as one of the breeding blanket candidate schemes for Chinese Fusion Engineering Test Reactor (CFETR). In this study, a simplified tritium transport model was developed. Based on the conceptual engineering design, neutronics and thermal-hydraulic analyses of CFETR WCSB blanket, tritium transport process was analyzed. The results show that high tritium concentration and inventory exist in primary water loop and total tritium losses exceed CFETR limits under current conditions. Conducted were sensitivity analyses of influential parameters, including tritium source, temperature, flow-rate capacity and surface condition. Tritium performance of WCSB blanket can be significantly improved under a smaller tritium impinging rate, a larger flow-rate capacity or a better surface condition. This work provides valuable reference for the enhancement of tritium transport behavior in CFETR WCSB blanket.

  15. Tritium Reduction and Control in the Vacuum Vessel during TFTR Outage and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, W.; Camp, R.; Carnevale, H.; Casey, M.; Collins, J.; et al

    1997-11-01

    In the summer/fall of 1996 after nearly three years of D-T operations, TFTR underwent an extended outage during which large port covers were removed from the vacuum vessel in order to complete upgrades to the tokamak. Following the venting of the torus, a three tier system was developed for the outage in order to reduce and control the free tritium in the vacuum vessel so as to minimize the exposure to personnel during port cover removal and reinstallation. The first phase of the program to reduce the free tritium consisted of direct flowthrough of room air through the vacuum vessel to the molecular sieve beds using the Torus Cleanup System. Real time measurements of the effluent tritium concentration were used to derive the amount of tritium removed from the torus. Once the free tritium in the vessel had been reduced to approximately 50 Ci, a second phase was initiated using a 55 Gallon Drum Bubbler System for the direct processing of the vacuum vessel to further lower the tritium level in the torus. Tritium oxide is absorbed by the bubbler system with the exhaust vented to one of the tritium monitored HVAC ventilation stacks. To preclude the release of tritium to the Test Cell location of TFTR and to minimize the exposure of workers, a variable flow exhaust system was employed in order to maintain a negative pressure in the vacuum vessel between 0.05" and 1.5" w.c. during the removal of port covers ranging in size from approximately 5 to 1000 in(superscript2). These systems were completely successful in reducing and controlling the free tritium in TFTR and were instrumental in maintaining ALARA (As Low As Reasonably Achievable) exposures to tritium during the 1996 outage. These systems are again being utilized during the safe shutdown and decommissioning of TFTR which commenced in April of 1997. This paper describes in detail the configuration of these systems and the data obtained during the outage and safe shutdown of TFTR.

  16. On line tritium measurement; La mesure du tritium en ligne

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2011-07-01

    Berthold Technologies has developed a new beacon able to measure the activity of tritium in the atmosphere. The real-time measurement will allow the operator to be warned of the exceeding of radiation thresholds. The air sample to be measured is mixed with a counting gas (generally argon/methane) and pumped through a proportional counter. The device counts the electric impulses due to the interaction between the beta particles generated by the tritium and the counting gas. The detection threshold is 500 Bq/m{sup 3} for a counting time of 1 hour. The device also allows the operator to get an emission spectrum of the air sample. (A.C.)

  17. Stability of Tritium and Iodine Sorbents in TPOG Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, Jacob A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jubin, Robert Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-04-01

    US regulations could require the removal of both iodine and tritium from the off-gas stream of a used nuclear fuel (UNF) reprocessing facility. Advanced tritium pretreatment is a pretreatment step that uses high concentrations of NOR2R in a gas stream to volatilize tritium and iodine from UNF prior to traditional dissolution. The gaseous effluent from this process would then require abatement to remove tritium and iodine, but high levels of NOR2R could have a detrimental effect on the ability of various solid sorbents to remove the volatile radionuclides. For tritium and iodine, the sorbents of interest are 3Å molecular sieve (3AMS) for tritium and reduced silver mordenite (AgP0 PZ), silver-functionalized silica-aerogel (AgAerogel), and silver-nitrate-impregnated alumina (AgA) for iodine. Prior research has demonstrated that exposure to high concentrations of NOR2R can reduce the iodine loading capacity of AgP0 PZ by > 90% when exposed for 1 week. Research in Japan has demonstrated that AgA is more robust to NOR2R exposure than AgZ. The testing described here was intended to assess the effects of high concentrations of NOR2R on the iodine capture capacity of AgA and the water adsorption capacity of 3AMS. To determine the effect of extended exposure of the sorbents to NOR2R, both 3AMS and AgA were aged in a 75% NOR2R environment prior to loading. The 3AMS samples were aged for 1, 4, and 5.5 weeks at 40°C. They were then loaded with water in a 10°C dew point stream (corresponding to a water concentration of ~12,000 ppmv) at 40°C. There was no significant change in the water adsorption capacity of the 3AMS upon exposure to 75% NOR2R. The AgA samples were aged for 1, 2, and 4 weeks at 150°C and were loaded with 50 ppmv IR2R at 150°C. The results show that the iodine capture capacity of AgA is reduced by exposure to high concentrations of NOR2R. The iodine capacity reductions were 16%, 36%, and 76% for 1, 2, and 4 week exposures, respectively

  18. Estimation of Biological Effects of Tritium.

    Science.gov (United States)

    Umata, Toshiyuki

    2017-01-01

    Nuclear fusion technology is expected to create new energy in the future. However, nuclear fusion requires a large amount of tritium as a fuel, leading to concern about the exposure of radiation workers to tritium beta radiation. Furthermore, countermeasures for tritium-polluted water produced in decommissioning of the reactor at Fukushima Daiichi Nuclear Power Station may potentially cause health problems in radiation workers. Although, internal exposure to tritium at a low dose/low dose rate can be assumed, biological effect of tritium exposure is not negligible, because tritiated water (HTO) intake to the body via the mouth/inhalation/skin would lead to homogeneous distribution throughout the whole body. Furthermore, organically-bound tritium (OBT) stays in the body as parts of the molecules that comprise living organisms resulting in long-term exposure, and the chemical form of tritium should be considered. To evaluate the biological effect of tritium, the effect should be compared with that of other radiation types. Many studies have examined the relative biological effectiveness (RBE) of tritium. Hence, we report the RBE, which was obtained with radiation carcinogenesis classified as a stochastic effect, and serves as a reference for cancer risk. We also introduce the outline of the tritium experiment and the principle of a recently developed animal experimental system using transgenic mouse to detect the biological influence of radiation exposure at a low dose/low dose rate.

  19. Tritium in Exit Signs | RadTown USA | US EPA

    Science.gov (United States)

    2017-08-07

    Many exit signs contain tritium to light the sign without batteries or electricity. Using tritium in exit signs allows the sign to remain lit if the power goes out. Tritium is most dangerous when it is inhaled or swallowed. Never tamper with a tritium exit sign. If a tritium exit sign is broken, leave the area immediately and notify the building maintenance staff.

  20. Radiological training for tritium facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    This program management guide describes a recommended implementation standard for core training as outlined in the DOE Radiological Control Manual (RCM). The standard is to assist those individuals, both within DOE and Managing and Operating contractors, identified as having responsibility for implementing the core training recommended by the RCM. This training may also be given to radiological workers using tritium to assist in meeting their job specific training requirements of 10 CFR 835.

  1. Enhancing radiolytic stability upon concentration of tritium-labeled pharmaceuticals utilizing centrifugal evaporation.

    Science.gov (United States)

    Marques, Rosemary; Helmy, Roy; Waterhouse, David

    2015-05-30

    Tritium radiopharmaceuticals are often used in drug development because of their desirable specific activity. The inherent instability of these radioactive tracers often leads to a requirement to purify prior to use. Purification methodologies such as preparative chromatography and solid/liquid extractions often utilize water as a solvent, which is not suitable for long-term storage and necessitates removal. Rotary evaporation has traditionally been utilized for the removal of this unwanted solvent, however, this method has been shown to lead to decomposition of the tritium species in some cases. Centrifugal evaporation is a milder concentration method which has been demonstrated to effectively remove solvents. In this study, we show that centrifugal evaporation leads to effective concentration of tritium samples without the decomposition typically observed by rotary evaporation. Copyright © 2015 John Wiley & Sons, Ltd.

  2. Development of a tritium monitor combined with an electrochemical tritium pump using a proton conducting oxide

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, M. [National Institute for Fusion Science, Toki, Gifu (Japan); Sugiyama, T. [Nagoya University, Fro-cho, Chikusa-ku, Nagoya (Japan)

    2015-03-15

    The detection of low level tritium is one of the key issues for tritium management in tritium handling facilities. Such a detection can be performed by tritium monitors based on proton conducting oxide technique. We tested a tritium monitoring system composed of a commercial proportional counter combined with an electrochemical hydrogen pump equipped with CaZr{sub 0.9}In{sub 0.1}O{sub 3-α} as proton conducting oxide. The hydrogen pump operated at 973 K under electrolysis conditions using tritiated water vapor (HTO). The proton conducting oxide extracts tritium molecules (HT) from HTO and tritium concentration is measured by the proportional counter. The advantage of the proposed tritium monitoring system is that it is able to convert HTO into molecular hydrogen.

  3. Sorbent materials for fusion reactor tritium processing

    Energy Technology Data Exchange (ETDEWEB)

    Toci, F.; Viola, A.; Edwards, R.A.H. [Joint Research Centre, Ispra (Italy)] [and others

    1994-12-31

    A fusion reactor (like NET/ITER) which breeds its own tritium fuel requires tritium recovery, purification and separation from the other isotopes. Gas-solid exchange processes are amongst the most promising techniques for accomplishing this with minimum tritium inventory. A good adsorbent for gas-solid exchange processes must have high adsorption capacity, high selectivity and very low tritium retention after each cycle. Pure zeolite powder is shown to have an excellent combination of these three properties. However, commercial pellets show appreciable tritium retention probably due to the presence of the binder, and to inappropriate activation procedures. In this paper the authors report a research study aimed at producing a pelletized zeolite with low tritium retention. Furthermore, they report a study of zeolite activation procedures.

  4. History of 232-F, tritium extraction processing

    Energy Technology Data Exchange (ETDEWEB)

    Blackburn, G.W.

    1994-08-01

    In 1950 the Atomic Energy Commission authorized the Savannah River Project principally for the production of tritium and plutonium-239 for use in thermonuclear weapons. 232-F was built as an interim facility in 1953--1954, at a cost of $3.9M. Tritium extraction operations began in October, 1955, after the reactor and separations startups. In July, 1957 a larger tritium facility began operation in 232-H. In 1958 the capacity of 232-H was doubled. Also, in 1957 a new task was assigned to Savannah River, the loading of tritium into reservoirs that would be actual components of thermonuclear weapons. This report describes the history of 232-F, the process for tritium extraction, and the lessons learned over the years that were eventually incorporated into the new Replacement Tritium Facility.

  5. Tritium radioluminescent devices, Health and Safety Manual

    Energy Technology Data Exchange (ETDEWEB)

    Traub, R.J.; Jensen, G.A.

    1995-06-01

    This document consolidates available information on the properties of tritium, including its environmental chemistry, its health physics, and safe practices in using tritium-activated RL lighting. It also summarizes relevant government regulations on RL lighting. Chapters are divided into a single-column part, which provides an overview of the topic for readers simply requiring guidance on the safety of tritium RL lighting, and a dual-column part for readers requiring more technical and detailed information.

  6. Tritium in precipitation of Vostok (Antarctica): conclusions on the tritium latitude effect.

    Science.gov (United States)

    Hebert, Detlef

    2011-09-01

    During the Antarctic summer of 1985 near the Soviet Antarctic station Vostok, firn samples for tritium measurements were obtained down to a depth of 2.40 m. The results of the tritium measurements are presented and discussed. Based on this and other data, conclusions regarding the tritium latitude effect are derived.

  7. Tritium resources available for fusion reactors

    Science.gov (United States)

    Kovari, M.; Coleman, M.; Cristescu, I.; Smith, R.

    2018-02-01

    The tritium required for ITER will be supplied from the CANDU production in Ontario, but while Ontario may be able to supply 8 kg for a DEMO fusion reactor in the mid-2050s, it will not be able to provide 10 kg at any realistic starting time. The tritium required to start DEMO will depend on advances in plasma fuelling efficiency, burnup fraction, and tritium processing technology. It is in theory possible to start up a fusion reactor with little or no tritium, but at an estimated cost of 2 billion per kilogram of tritium saved, it is not economically sensible. Some heavy water reactor tritium production scenarios with varying degrees of optimism are presented, with the assumption that only Canada, the Republic of Korea, and Romania make tritium available to the fusion community. Results for the tritium available for DEMO in 2055 range from zero to 30 kg. CANDU and similar heavy water reactors could in theory generate additional tritium in a number of ways: (a) adjuster rods containing lithium could be used, giving 0.13 kg per year per reactor; (b) a fuel bundle with a burnable absorber has been designed for CANDU reactors, which might be adapted for tritium production; (c) tritium production could be increased by 0.05 kg per year per reactor by doping the moderator with lithium-6. If a fusion reactor is started up around 2055, governments in Canada, Argentina, China, India, South Korea and Romania will have the opportunity in the years leading up to that to take appropriate steps: (a) build, refurbish or upgrade tritium extraction facilities; (b) extend the lives of heavy water reactors, or build new ones; (c) reduce tritium sales; (d) boost tritium production in the remaining heavy water reactors. All of the alternative production methods considered have serious economic and regulatory drawbacks, and the risk of diversion of tritium or lithium-6 would also be a major concern. There are likely to be serious problems with supplying tritium for future

  8. Sensitivity Analysis of RCW Temperature on the Moderator Subcooling Margin for the LBLOCA of Wolsong NPP Unit 1

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Si Won; Kim, Jong Hyun; Choi, Sung Soo [Atomic Creative Technology Co., Daejeon (Korea, Republic of); Kim, Sung Min [Central Research Institute, Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2016-05-15

    Moderator subcooling margin has been analyzed using the MODTURC{sub C}LAS code in the Large LOCA FSAR PARTs C and F. Performance of moderator heat exchangers depends on RCW (Raw reCirculated Water) temperature. And also the temperature is affected by sea water temperature. Unfortunately, sea water temperature is gradually increasing by global warming. So it will cause increase of RCW temperature inevitably. There is no assessment result of moderator subcooling with increasing RCW temperature even if it is important problem. Therefore, sensitivity analysis is performed to give information about the relation between RCW temperature and moderator subcooling in the present study. The moderator subcooling margin has to be ensured to establish the moderator heat removal when Large LOCA with LOECI and Loss of Class IV Power occurs. However, sea water temperature is increasing gradually due to global warming. So it is necessary that sensitivity analysis of RCW temperature on the moderator subcooling margin to estimate the availability of the moderator heat removal. In the present paper, the moderator subcooling analysis is performed using the same methodology and assumptions except for RCW temperature used in FSAR Large LOCA PART F.

  9. DOE handbook: Tritium handling and safe storage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance.

  10. Management of Tritium in European Spallation Source

    DEFF Research Database (Denmark)

    Ene, Daniela; Andersson, Kasper Grann; Jensen, Mikael

    2015-01-01

    The European Spallation Source (ESS) will produce tritium via spallation and activation processes during operational activities. Within the location of ESS facility in Lund, Sweden site it is mandatory to demonstrate that the management strategy of the produced tritium ensures the compliance...... with the country regulation criteria. The aim of this paper is to give an overview of the different aspects of the tritium management in ESS facility. Besides the design parameter study of the helium coolant purification system of the target the consequences of the tritium releasing into the environment were also...... analyzed. Calculations shown that the annual release of tritium during the normal operations represents a small fraction from the estimated total dose. However, more refined calculations of migration of activated-groundwater should be performed for higher hydraulic conductivities, with the availability...

  11. Tritium content in tissue free water of Japanese bodies

    Energy Technology Data Exchange (ETDEWEB)

    Ujeno, Y.; Yamamoto, K.; Aoki, T.; Kurihara, N.

    1986-01-01

    The tritium content of tissue free water was measured in fresh, non-diseased organs (brain, lungs, liver, kidneys and muscle) removed by forensic autopsy from 4 male and 4 female bodies. Tissue free water was extracted by freeze drying and distillation and tritium measured in the absence of background radon gas. A typical count was approximately 2.70 cpm. The mean tritium content of tissue free water in all the organs examined was 2.50 + - 0.67 Bq.1/sup -1/ (67.6 + -18.2 pCi1/sup -1/). This value was much lower than that obtained for tissues from Italian bodies: the value was, however, similar to that obtained for tap water (70.2 + -28.0 pCi.1/sup -1/), rain water (77.8 + - 47.4 pCi.1/sup -1/) and tissue free water of foods (55.6 + - 26.2 pCi.1/sup -1/).

  12. Tritium decay helium-3 effects in tungsten

    Directory of Open Access Journals (Sweden)

    M. Shimada

    2017-08-01

    Full Text Available Tritium (T implanted by plasmas diffuses into bulk material, especially rapidly at elevated temperatures, and becomes trapped in neutron radiation-induced defects in materials that act as trapping sites for the tritium. The trapped tritium atoms will decay to produce helium-3 (3He atoms at a half-life of 12.3 years. 3He has a large cross section for absorbing thermal neutrons, which after absorbing a neutron produces hydrogen (H and tritium ions with a combined kinetic energy of 0.76 MeV through the 3He(n,HT nuclear reaction. The purpose of this paper is to quantify the 3He produced in tungsten by tritium decay compared to the neutron-induced helium-4 (4He produced in tungsten. This is important given the fact that helium in materials not only creates microstructural damage in the bulk of the material but alters surface morphology of the material effecting plasma-surface interaction process (e.g. material evolution, erosion and tritium behavior of plasma-facing component materials. Effects of tritium decay 3He in tungsten are investigated here with a simple model that predicts quantity of 3He produced in a fusion DEMO FW based on a neutron energy spectrum found in literature. This study reveals that: (1 helium-3 concentration was equilibrated to ∼6% of initial/trapped tritium concentration, (2 tritium concentration remained approximately constant (94% of initial tritium concentration, and (3 displacement damage from 3He(n,HT nuclear reaction became >1 dpa/year in DEMO FW.

  13. PDRD (SR13046) TRITIUM PRODUCTION FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.; Sheetz, S.

    2013-09-30

    Utilizing the results of Texas A&M University (TAMU) senior design projects on tritium production in four different small modular reactors (SMR), the Savannah River National Laboratory’s (SRNL) developed an optimization model evaluating tritium production versus uranium utilization under a FY2013 plant directed research development (PDRD) project. The model is a tool that can evaluate varying scenarios and various reactor designs to maximize the production of tritium per unit of unobligated United States (US) origin uranium that is in limited supply. The primary module in the model compares the consumption of uranium for various production reactors against the base case of Watts Bar I running a nominal load of 1,696 tritium producing burnable absorber rods (TPBARs) with an average refueling of 41,000 kg low enriched uranium (LEU) on an 18 month cycle. After inputting an initial year, starting inventory of unobligated uranium and tritium production forecast, the model will compare and contrast the depletion rate of the LEU between the entered alternatives. This is an annual tritium production rate of approximately 0.059 grams of tritium per kilogram of LEU (g-T/kg-LEU). To date, the Nuclear Regulatory Commission (NRC) license has not been amended to accept a full load of TPBARs so the nominal tritium production has not yet been achieved. The alternatives currently loaded into the model include the three light water SMRs evaluated in TAMU senior projects including, mPower, Holtec and NuScale designs. Initial evaluations of tritium production in light water reactor (LWR) based SMRs using optimized loads TPBARs is on the order 0.02-0.06 grams of tritium per kilogram of LEU used. The TAMU students also chose to model tritium production in the GE-Hitachi SPRISM, a pooltype sodium fast reactor (SFR) utilizing a modified TPBAR type target. The team was unable to complete their project so no data is available. In order to include results from a fast reactor, the SRNL

  14. A probability model: Tritium release into the coolant of a light water tritium production reactor

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, D N

    1992-04-01

    This report presents a probability model of the total amount of tritium that will be released from a core of tritium target rods into the coolant of a light water reactor during a tritium production cycle.The model relates the total tritium released from a core to the release characteristics of an individual target rod within the core. The model captures total tritium release from two sources-release via target rod breach and release via permeation through the target rod. Specifically, under conservative assumptions about the breach characteristics of a target rod, total tritium released from a core is modeled as a function of the probability of a target breach and the mean and standard deviation of the permeation reduction factor (PRF) of an individual target rod. Two dominant facts emerge from the analysis in this report. First, total tritium release cannot be controlled and minimized solely through the PRF characteristics of a target rod. Tritium release via breach must be abated if acceptable tritium production is to be achieved. Second, PRF values have a saturation point to their effectiveness. Specifically, in the presence of any realistic level of PRF variability, increasing PRF values above approximately 1000 wig contribute little to minimizing total tritium release.

  15. 10 CFR 39.55 - Tritium neutron generator target sources.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Tritium neutron generator target sources. 39.55 Section 39... Equipment § 39.55 Tritium neutron generator target sources. (a) Use of a tritium neutron generator target...) Use of a tritium neutron generator target source, containing quantities exceeding 1,110 GBg or in a...

  16. Tritium Room Air Monitor Operating Experience Review

    Energy Technology Data Exchange (ETDEWEB)

    L. C. Cadwallader; B. J. Denny

    2008-09-01

    Monitoring the breathing air in tritium facility rooms for airborne tritium is a radiological safety requirement and a best practice for personnel safety. Besides audible alarms for room evacuation, these monitors often send signals for process shutdown, ventilation isolation, and cleanup system actuation to mitigate releases and prevent tritium spread to the environment. Therefore, these monitors are important not only to personnel safety but also to public safety and environmental protection. This paper presents an operating experience review of tritium monitor performance on demand during small (1 mCi to 1 Ci) operational releases, and intentional airborne inroom tritium release tests. The tritium tests provide monitor operation data to allow calculation of a statistical estimate for the reliability of monitors annunciating in actual tritium gas airborne release situations. The data show a failure to operate rate of 3.5E-06/monitor-hr with an upper bound of 4.7E-06, a failure to alarm on demand rate of 1.4E-02/demand with an upper bound of 4.4E-02, and a spurious alarm rate of 0.1 to 0.2/monitor-yr.

  17. Isotopic fractionation of tritium in biological systems.

    Science.gov (United States)

    Le Goff, Pierre; Fromm, Michel; Vichot, Laurent; Badot, Pierre-Marie; Guétat, Philippe

    2014-04-01

    Isotopic fractionation of tritium is a highly relevant issue in radiation protection and requires certain radioecological considerations. Sound evaluation of this factor is indeed necessary to determine whether environmental compartments are enriched/depleted in tritium or if tritium is, on the contrary, isotopically well-distributed in a given system. The ubiquity of tritium and the standard analytical methods used to assay it may induce biases in both the measurement and the signification that is accorded to the so-called fractionation: based on an exhaustive review of the literature, we show how, sometimes large deviations may appear. It is shown that when comparing the non-exchangeable fraction of organically bound tritium (neOBT) to another fraction of tritium (e.g. tritiated water) the preparation of samples and the measurement of neOBT reported frequently led to underestimation of the ratio of tritium to hydrogen (T/H) in the non-exchangeable compartment by a factor of 5% to 50%. In the present study, corrections are proposed for most of the biological matrices studied so far. Nevertheless, the values of isotopic fractionation reported in the literature remain difficult to compare with each other, especially since the physical quantities and units often vary between authors. Some improvements are proposed to better define what should encompass the concepts of exchangeable and non-exchangeable fractions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Target/Blanket Design for the Accelerator Production of Tritium Plant

    Energy Technology Data Exchange (ETDEWEB)

    Cappiello, M. W.

    1997-12-31

    The Accelerator Production of Tritium Target/Blanket (T/B) system is comprised of the T/B assembly and the attendant heat removal systems. The T/B assembly produces tritium using a high energy proton beam, and a spallation neutron source. The supporting heat removal systems safely remove the heat deposited by the proton beam during both normal and off-normal conditions. All systems reside within the T/B building, which is located at the end of a linear accelerator. Protons are accelerated to an energy of 1700 MeV at a current of 100 mA and are directed onto the T/B assembly. The protons interact with tungsten and lead nuclei to produce neutrons through the process of nuclear spallation. Neutron capture in {sup 3}He gas produces tritium which is removed on a continual basis in an adjacent Tritium Separation Facility (TSF). The T/B assembly is modular to allow for replacement of spent components and minimization of waste. Systems and components are designed with safety as a primary consideration to minimize risk to the workers and the public.

  19. Tritium extraction technologies and DEMO requirements

    Energy Technology Data Exchange (ETDEWEB)

    Demange, D., E-mail: david.demange@kit.edu [Karlsruhe Institute of Technology, Institute for Technical Physics, Tritium Laboratory Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Antunes, R.; Borisevich, O.; Frances, L. [Karlsruhe Institute of Technology, Institute for Technical Physics, Tritium Laboratory Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Rapisarda, D. [Laboratorio Nacional de Fusión, EURATOM-CIEMAT, 28040 Madrid (Spain); Santucci, A. [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy); Utili, M. [ENEA CR Brasimone, 40032 Camugnano, BO (Italy)

    2016-11-01

    Highlights: • We detail the R&D plan for tritium technology of the European DEMO breeding blanket. • We study advanced and efficient extraction techniques to improve tritium management. • We consider inorganic membranes and catalytic membrane reactor for solid blankets. • We consider permeator against vacuum and vacuum sieve tray for liquid blankets. - Abstract: The conceptual design of the tritium extraction system (TES) for the European DEMO reactor is worked out in parallel for four different breeding blankets (BB) retained by EUROfusion. The TES design has to be tackled in an integrated manner optimizing the synergy with the directly interfacing inner fuel cycle, while minimizing the tritium permeation into the coolant. Considering DEMO requirements, it is most likely that only advanced technologies will be suitable for the tritium extraction systems of the BB. This paper overviews the European work programme for R&D on tritium technology for the DEMO BB, summaries the general first outcomes, and details the specific and comprehensive R&D program to study experimentally immature but promising technologies such as vacuum sieve tray or permeator against vacuum for tritium extraction from PbLi, and advanced inorganic membranes and catalytic membrane reactor for tritium extraction from He. These techniques are simple, fully continuous, likely compact with contained energy consumption. Several European Laboratories are joining their efforts to deploy several new experimental setups to accommodate the tests campaigns that will cover small scale experiments with tritium and inactive medium scale tests so as to improve the technology readiness level of these advanced processes.

  20. Tritium monitor with improved gamma-ray discrimination

    Science.gov (United States)

    Cox, Samson A.; Bennett, Edgar F.; Yule, Thomas J.

    1985-01-01

    Apparatus and method for selective measurement of tritium oxide in an environment which may include other radioactive components and gamma radiation, the measurement including the selective separation of tritium oxide from a sample gas through a membrane into a counting gas, the generation of electrical pulses individually representative by rise times of tritium oxide and other radioactivity in the counting gas, separation of the pulses by rise times, and counting of those pulses representative of tritium oxide. The invention further includes the separate measurement of any tritium in the sample gas by oxidizing the tritium to tritium oxide and carrying out a second separation and analysis procedure as described above.

  1. Tritium labeling of amino acids and peptides with liquid and solid tritium

    Energy Technology Data Exchange (ETDEWEB)

    Souers, P.C.; Coronado, P.R.; Peng, C.T.; Hua, R.L.

    1988-01-01

    Amino acids and peptides were labeled with liquid and solid tritium at 21/degree/K and 9/degree/K. At these low temperatures radiation degradation is minimal, and tritium incorporation increases with tritium concentration and exposure time. Ring saturation in L-phenylalanine does not occur. Peptide linkage in oligopeptides is stable toward tritium. Deiodination in 3-iodotyrosine and 3,5-diiodotyrosine occurs readily and proceeds in steps by losing one iodine atom at a time. Nickel and noble metal supported catalysts when used as supports for dispersion of the substrate promote tritium labeling at 21 K. Our study shows that both liquid and solid tritiums are potentially useful agents for labeling peptides and proteins.

  2. Optimization of tritium management within the ITER project; Optimisation de la gestion du tritium dans le projet ITER

    Energy Technology Data Exchange (ETDEWEB)

    Cortes, P.; Elbez-Uzan, J.; Glugla, M.; Rosanvallon, S.; Ciattaglia, S.; Iseli, M.; Rodriguez-Rodrigo, L. [ITER Organization, CS 9 0046, 13067 St Paul lez Durance Cedex (France)

    2009-07-01

    The authors describe the tritium cycle existing within the ITER project and which has been considered since its beginning. They indicate how confinement systems ensure tritium confinement, how tritium is recovered and processed. They indicate the different tritium management optimization ways which have been identified and integrated into the ITER design

  3. Tritium containing polymers having a polymer backbone substantially void of tritium

    Science.gov (United States)

    Jensen, George A.; Nelson, David A.; Molton, Peter M.

    1992-01-01

    A radioluminescent light source comprises a solid mixture of a phosphorescent substance and a tritiated polymer. The solid mixture forms a solid mass having length, width, and thickness dimensions, and is capable of self-support. In one aspect of the invention, the phosphorescent substance comprises solid phosphor particles supported or surrounded within a solid matrix by a tritium containing polymer. The tritium containing polymer comprises a polymer backbone which is essentially void of tritium.

  4. Tritium glovebox stripper system seismic design evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Grinnell, J. J. [Savannah River Site (SRS), Aiken, SC (United States); Klein, J. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-09-01

    The use of glovebox confinement at US Department of Energy (DOE) tritium facilities has been discussed in numerous publications. Glovebox confinement protects the workers from radioactive material (especially tritium oxide), provides an inert atmosphere for prevention of flammable gas mixtures and deflagrations, and allows recovery of tritium released from the process into the glovebox when a glovebox stripper system (GBSS) is part of the design. Tritium recovery from the glovebox atmosphere reduces emissions from the facility and the radiological dose to the public. Location of US DOE defense programs facilities away from public boundaries also aids in reducing radiological doses to the public. This is a study based upon design concepts to identify issues and considerations for design of a Seismic GBSS. Safety requirements and analysis should be considered preliminary. Safety requirements for design of GBSS should be developed and finalized as a part of the final design process.

  5. Development of Tritium Permeation Analysis Code (TPAC)

    Energy Technology Data Exchange (ETDEWEB)

    Eung S. Kim; Chang H. Oh; Mike Patterson

    2010-10-01

    Idaho National Laboratory developed the Tritium Permeation Analysis Code (TPAC) for tritium permeation in the Very High Temperature Gas Cooled Reactor (VHTR). All the component models in the VHTR were developed and were embedded into the MATHLAB SIMULINK package with a Graphic User Interface. The governing equations of the nuclear ternary reaction and thermal neutron capture reactions from impurities in helium and graphite core, reflector, and control rods were implemented. The TPAC code was verified using analytical solutions for the tritium birth rate from the ternary fission, the birth rate from 3He, and the birth rate from 10B. This paper also provides comparisons of the TPAC with the existing other codes. A VHTR reference design was selected for tritium permeation study from the reference design to the nuclear-assisted hydrogen production plant and some sensitivity study results are presented based on the HTGR outlet temperature of 750 degrees C.

  6. Construction and commissioning of a hydrogen cryogenic distillation system for tritium recovery at ICIT Rm. Valcea

    Energy Technology Data Exchange (ETDEWEB)

    Ana, George, E-mail: george.ana@icsi.ro [Institute for Cryogenic and Isotopic Technologies, Rm. Valcea (Romania); Cristescu, Ion [Karlsruhe Istitute for Technologies, Tritium Laboratory, Eggenstein-Leopoldshaffen (Germany); Draghia, Mirela [ISTECH, Timisoara (Romania); Bucur, Ciprian; Balteanu, Ovidiu; Vijulie, Mihai; Popescu, Gheorghe; Costeanu, Claudiu; Sofilca, Nicolae; Stefan, Iulia; Daramus, Robert; Niculescu, Alina; Oubraham, Anisoara; Spiridon, Ionut; Vasut, Felicia; Moraru, Carmen; Brad, Sebastian [Institute for Cryogenic and Isotopic Technologies, Rm. Valcea (Romania); Pasca, Gheorghe [ISTECH, Timisoara (Romania)

    2016-05-15

    Highlights: • Cryogenic distillation (CD) process is being employed for tritium separation from tritiated hydrogen mixtures. • Process control and safety phylosophy with the detritiation plant from Rm. Vâlcea. • Tests undertaken prior to commissioning of the CD system from Rm. Vâlcea. • Preliminary experiments with the CD system (non-radiological). - Abstract: Cryogenic distillation (CD) of hydrogen in combination with Liquid Phase Catalytic Exchange (LPCE) or Combined Electrolytic Catalytic Exchange (CECE) process is used for tritium removal/recovery from tritiated water. Tritiated water is being obtained after long time operation of CANDU reactors, or in case of ITER mainly by the Detritiation System (DS). The cryogenic distillation system (CDS) used to remove/recover tritium from a hydrogen stream consists of a cascade of cryogenic distillation columns and a refrigeration unit which provides the cooling capacity for the condensers of CD columns. The columns, together with the condensers and the process heat-exchangers are accommodated in a vacuumed cold box. In the particularly case of the ICIT Plant, the cryogenic distillation cascade consists of four columns with diameters between 100–7 mm and it has been designed to process up to 10 mc/h of tritiated deuterium. This paper will present the steps undertaken for construction and commissioning of a pilot plant for tritium removal/recovery by cryogenic distillation of hydrogen. The paper will show besides preliminary data obtained during commissioning, also general characteristics of the plant and its equipments.

  7. Tritium release from neutron irradiated beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reactortechnik

    1998-01-01

    One of the most important open issues related to beryllium for fusion applications refers to the kinetics of the tritium release as a function of neutron fluence and temperature. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating the beryllium response under neutron irradiation. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from the above mentioned irradiation experiments, trying to elucidate the tritium release controlling processes. In agreement with previous studies it has been found that release starts at about 500-550degC and achieves a maximum at about 700-750degC. The observed release at about 500-550degC is probably due to tritium escaping from chemical traps, while the maximum release at about 700-750degC is due to tritium escaping from physical traps. The consequences of a direct contact between beryllium and ceramics during irradiation, causing tritium implanting in a surface layer of beryllium up to a depth of about 40 mm and leading to an additional inventory which is usually several times larger than the neutron-produced one, are also presented and the effects on the tritium release are discussed. (author)

  8. Radioactive waste tank ventilation system incorporating tritium control

    Energy Technology Data Exchange (ETDEWEB)

    Rice, P.D. [ICF Kaiser Hanford Company, Richland, WA (United States)

    1997-08-01

    This paper describes the development of a ventilation system for radioactive waste tanks at the U.S. Department of Energy`s (DOE) Hanford Site in Richland, Washington. The unique design of the system is aimed at cost-effective control of tritiated water vapor. The system includes recirculation ventilation and cooling for each tank in the facility and a central exhaust air clean-up train that includes a low-temperature vapor condenser and high-efficiency mist eliminator (HEME). A one-seventh scale pilot plant was built and tested to verify predicted performance of the low-temperature tritium removal system. Tests were conducted to determine the effectiveness of the removal of condensable vapor and soluble and insoluble aerosols and to estimate the operating life of the mist eliminator. Definitive design of the ventilation system relied heavily on the test data. The unique design features of the ventilation system will result in far less release of tritium to the atmosphere than from conventional high-volume dilution systems and will greatly reduce operating costs. NESHAPs and TAPs NOC applications have been approved, and field construction is nearly complete. Start-up is scheduled for late 1996. 3 refs., 4 figs., 2 tabs.

  9. Tritium levels in milk in the vicinity of chronic tritium releases.

    Science.gov (United States)

    Le Goff, P; Guétat, Ph; Vichot, L; Leconte, N; Badot, P M; Gaucheron, F; Fromm, M

    2016-01-01

    Tritium is the radioactive isotope of hydrogen. It can be integrated into most biological molecules. Even though its radiotoxicity is weak, the effects of tritium can be increased following concentration in critical compartments of living organisms. For a better understanding of tritium circulation in the environment and to highlight transfer constants between compartments, we studied the tritiation of different agricultural matrices chronically exposed to tritium. Milk is one of the most frequently monitored foodstuffs in the vicinity of points known for chronic release of radionuclides firstly because dairy products find their way into most homes but also because it integrates deposition over large areas at a local scale. It is a food which contains all the main nutrients, especially proteins, carbohydrates and lipids. We thus studied the tritium levels of milk in chronic exposure conditions by comparing the tritiation of the main hydrogenated components of milk, first, component by component, then, sample by sample. Significant correlations were found between the specific activities of drinking water and free water of milk as well as between the tritium levels of cattle feed dry matter and of the main organic components of milk. Our findings stress the importance of the metabolism on the distribution of tritium in the different compartments. Overall, dilution of hydrogen in the environmental compartments was found to play an important role dimming possible isotopic effects even in a food chain chronically exposed to tritium. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Tritium means of detection and of protection; Le tritium moyens de detection et de protection

    Energy Technology Data Exchange (ETDEWEB)

    Sutra-Fourcade, Y. [Commissariat a l' Energie Atomique, Marcoule (France). Centre d' Etudes Nucleaires

    1967-07-01

    The report is an attempt to correlate present data concerning tritium, especially from the health physics points of view. The various detection and measurement methods are reviewed in turn: measurement of tritium in the atmosphere, in liquids and on surfaces. The operation of various types of apparatus is analyzed and the sensitivity limits deduced from laboratory tests are given. Otter sections are devoted to the means of protection which can be used against inhalation of tritium (ventilation, protective clothing) and to calculations of the changes in atmospheric pollution in a given place and of the time spent in a contaminated zone. The last part deals with the decontamination of equipment contaminated with tritium. (author) [French] Le rapport represente un essai de synthese des connaissances actuelles sur le tritium, essentiellement du point de vue de la radioprotection. Les differents moyens de detection et de mesure sont successivement passes en revue: mesure du tritium dans l'atmosphere, dans les liquides, sur les surfaces. Le fonctionnement de differents types d'appareils est analyse et les limites de sensibilite sont donnees d'apres les essais effectues en laboratoire. D'autres paragraphes sont consacres aux moyens de protection contre l'inhalation du tritium (ventilation, vetements de protection), a des calculs d'evolution de pollution atmospherique dans les locaux et de temps de presence en atmosphere contaminee. La derniere partie se rapporte a la de contamination de materiel contamine par du tritium. (auteur)

  11. Tritium Recovery at Fusion Facility 4.Tritium Experience in JT-60 Operation

    Science.gov (United States)

    Oikawa, Akira; Miya, Naoyuki

    The tritium effluent of JT-60 vacuum exhaust through the stack and into the environment always remains below the detectable level. Tritium concentration in the drain water is below a limit of regulation by the local agreement and the law, though small tritium contamination in facility drains and in rain drains of the stack has occasionally been detected. Following an annual deuterium plasma discharge campaign, a 4-week hydrogen or helium plasma discharge campaign and subsequent ventilation of room air reduced the tritium concentration on the surface of in-vessel components back to ground level and then the in-vessel was ready for the maintenance. A cooperative endeavor is underway to complete an analysis of tritium behaviors in JT-60.

  12. Method and apparatus for controlling accidental releases of tritium

    Science.gov (United States)

    Galloway, Terry R. [Berkeley, CA

    1980-04-01

    An improvement in a tritium control system based on a catalytic oxidation reactor wherein accidental releases of tritium into room air are controlled by flooding the catalytic oxidation reactor with hydrogen when the tritium concentration in the room air exceeds a specified limit. The sudden flooding with hydrogen heats the catalyst to a high temperature within seconds, thereby greatly increasing the catalytic oxidation rate of tritium to tritiated water vapor. Thus, the catalyst is heated only when needed. In addition to the heating effect, the hydrogen flow also swamps the tritium and further reduces the tritium release.

  13. Tritium in the Savannah River Site environment

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, C.E. Jr.; Bauer, L.R.; Hayes, D.W.; Marter, W.L.; Zeigler, C.C.; Stephenson, D.E.; Hoel, D.D.; Hamby, D.M.

    1991-05-01

    Tritium is released to the environment from many of the operations at the Savannah River Site. The releases from each facility to the atmosphere and to the soil and streams, both from normal operations and inadvertent releases, over the period of operation from the early 1950s through 1988 are presented. The fate of the tritium released is evaluated through environmental monitoring, special studies, and modeling. It is concluded that approximately 91% of the tritium remaining after decay is now in the oceans. A dose and risk assessment to the population around the site is presented. It is concluded that about 0.6 fatal cancers may be associated with the tritium released during all the years of operation to the population of about 625,000. This same population (based on the overall US cancer statistics) is expected to experience about 105,000 cancer fatalities from all types of cancer. Therefore, it is considered unlikely that a relationship between any of the cancer deaths occurring in this population and releases of tritium from the SRS will be found.

  14. Preliminary results from a detritiation facility dedicated to soft housekeeping waste and tritium valorization

    Energy Technology Data Exchange (ETDEWEB)

    Liger, Karine, E-mail: karine.liger@cea.fr [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); CEA, DEN, Cadarache DTN/STPA/LIPC, F-13108 Saint-Paul-lez-Durance (France); Trabuc, Pierre; Mascarade, Jérémy; Troulay, Michèle; Perrais, Christophe [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); CEA, DEN, Cadarache DTN/STPA/LIPC, F-13108 Saint-Paul-lez-Durance (France); Tosti, Silvano; Borgognoni, Fabio [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); ENEA, Unità Tecnica Fusione, C.R. ENEA Frascati, Via E. Fermi 45, I-00044 Frascati (Italy)

    2014-10-15

    Highlights: •Feasibility assessment of a new detritiation process with recovering of tritium. •Coupling of a catalytic membrane reactor and a thermal detritiation unit. •Maximal global yield for the whole process of nearly 50%. •Effect of safety consideration on the choice of the carrier gas. -- Abstract: Nuclear waste management has to be taken into account for fusion machine using tritium as fuel. Soft housekeeping waste (e.g. gloves, tissues, protective clothes, etc.) is produced during the whole life as well as during the dismantling of the reactor and is contaminated by tritium under reduced (HT) and oxidized (HTO) forms. In collaboration with ENEA, a lab-scaled facility has been built at CEA Cadarache for soft housekeeping waste detritiation and tritium valorization. The previously milled waste is placed in a reactor to be heated up to a temperature lower than the housekeeping melting point. A carrier gas is then injected in the detritiation reactor to remove tritium, thanks to the combined effects of temperature and carrier gas (type and feed flow). The tritiated gas exhausted from the detritiation reactor is then sent through a catalytic Pd–Ag membrane reactor (CMR) where tritium is recovered via isotopic exchange reaction and permeation phenomenon. Based on previous studies that have allowed defining the most efficient operating conditions for the detritiation process, this work presents the results obtained by the coupling of the detritiation facility with the CMR. Due to safety considerations, restrictions on the nature of the carrier gas were applied, rejecting air as the carrier gas even though air was the best candidate for the detritiation part of the process. The performance of the whole system was estimated by means of a parametric study on the influence of flow rates in the CMR and transmembrane pressure.

  15. Advancement Of Tritium Powered Betavoltaic Battery Systems

    Energy Technology Data Exchange (ETDEWEB)

    Staack, G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Gaillard, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hitchcock, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Peters, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Colon-Mercado, H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Teprovich, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Coughlin, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Neikirk, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fisher, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-10-14

    Due to their decades-long service life and reliable power output under extreme conditions, betavoltaic batteries offer distinct advantages over traditional chemical batteries, especially in applications where frequent battery replacement is hazardous, or cost prohibitive. Although many beta emitting isotopes exist, tritium is considered ideal in betavoltaic applications for several reasons: 1) it is a “pure” beta emitter, 2) the beta is not energetic enough to damage the semiconductor, 3) it has a moderately long half-life, and 4) it is readily available. Unfortunately, the widespread application of tritium powered betavoltaics is limited, in part, by their low power output. This research targets improving the power output of betavoltaics by increasing the flux of beta particles to the energy conversion device (the p-n junction) through the use of low Z nanostructured tritium trapping materials.

  16. The solid-state synthesis of tritium labelled heterocyclic bases

    Energy Technology Data Exchange (ETDEWEB)

    Sidorov, G.V.; Myasoedov, N.F. (AN SSSR, Moscow (Russian Federation). Inst. Molekulyarnoj Genetiki)

    1994-04-01

    The results of a study of the solid-state catalytic hydrogenation and the synthesis of tritium labelled native heterocyclic bases are presented. The effect of different palladium catalysts and reaction conditions on yield and molar radioactivity of final compounds was investigated. For some compounds, data on the intramolecular distribution of tritium were obtained by using the isotope exchange reaction and tritium NMR. Tritium labelled purine and pyrimidine bases (25-180 Ci/mmol.) were synthesized. (Author).

  17. Tritium Research Laboratory safety analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Wright, D.A.

    1979-03-01

    Design and operational philosophy has been evolved to keep radiation exposures to personnel and radiation releases to the environment as low as reasonably achievable. Each experiment will be doubly contained in a glove box and will be limited to 10 grams of tritium gas. Specially designed solid-hydride storage beds may be used to store temporarily up to 25 grams of tritium in the form of tritides. To evaluate possible risks to the public or the environment, a review of the Sandia Laboratories Livermore (SLL) site was carried out. Considered were location, population, land use, meteorology, hydrology, geology, and seismology. The risks and the extent of damage to the TRL and vital systems were evaluated for flooding, lightning, severe winds, earthquakes, explosions, and fires. All of the natural phenomena and human error accidents were considered credible, although the extent of potential damage varied. However, rather than address the myriad of specific individual consequences of each accident scenario, a worst-case tritium release caused indirectly by an unspecified natural phenomenon or human error was evaluated. The maximum credible radiological accident is postulated to result from the release of the maximum quantity of gas from one experiment. Thus 10 grams of tritium gas was used in the analysis to conservatively estimate the maximum whole-body dose of 1 rem at the site boundary and a maximum population dose of 600 man-rem. Accidental release of this amount of tritium implies simultaneous failure of two doubly contained systems, an occurrence considered not credible. Nuclear criticality is impossible in this facility. Based upon the analyses performed for this report, we conclude that the Tritium Research Laboratory can be operated without undue risk to employees, the general public, or the environment. (ERB)

  18. Tritium transport in lithium ceramics porous media

    Energy Technology Data Exchange (ETDEWEB)

    Tam, S.W.; Ambrose, V.

    1991-12-31

    A random network model has been utilized to analyze the problem of tritium percolation through porous Li ceramic breeders. Local transport in each pore channel is described by a set of convection-diffusion-reaction equations. Long range transport is described by a matrix technique. The heterogeneous structure of the porous medium is accounted for via Monte Carlo methods. The model was then applied to an analysis of the relative contribution of diffusion and convective flow to tritium transport in porous lithium ceramics. 15 refs., 4 figs.

  19. Tritium transport in lithium ceramics porous media

    Energy Technology Data Exchange (ETDEWEB)

    Tam, S.W.; Ambrose, V.

    1991-01-01

    A random network model has been utilized to analyze the problem of tritium percolation through porous Li ceramic breeders. Local transport in each pore channel is described by a set of convection-diffusion-reaction equations. Long range transport is described by a matrix technique. The heterogeneous structure of the porous medium is accounted for via Monte Carlo methods. The model was then applied to an analysis of the relative contribution of diffusion and convective flow to tritium transport in porous lithium ceramics. 15 refs., 4 figs.

  20. Development of an environmental tritium model; ETDOSE

    Energy Technology Data Exchange (ETDEWEB)

    Andoh, Mariko; Takahashi, Tomoyuki; Amano, Hikaru [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1999-03-01

    ETDOSE is a simple computer code to calculate atmospheric distribution patterns of tritium for an acute and a chronic release of HT and HTO. This code calculates tritium concentrations in air, soil, plant free water and OBT, and estimates dose impact by inhalation of air and ingestion of food. Participation in IAEA`s model validation program BIOMASS has been done using this code for BIOMASS Scenario 1. This paper shows the outline of ETDOSE and preliminary results of model comparison in BIOMASS program. (author)

  1. Decommissioning of a tritium-contaminated laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Harper, J.R.; Garde, R.

    1982-01-01

    A tritium laboratory facility at the Los Alamos National Laboratory, Los Alamos, New Mexico, was decommissioned in 1979. The project involved dismantling the laboratory equipment and disposing of the equipment and debris at an on-site waste disposal/storage area. The laboratory, constructed in 1953, was in service for tritium research and fabrication of lithium tritide components until 1974. The major features of the laboratory included 25 meters of gloveboxes and hoods, associated vacuum lines, utility lines, exhaust ducts, electrodryers, blowers, and laboratory benches. This report presents details on the decommissioning, health physics, waste management, environmental surveillance, and costs for the operation.

  2. Atmospheric tritium. Progress report, July 1, 1975--March 31, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Oestlund, H.G.; Mason, A.S.

    1976-01-01

    Progress is reported in the development of field equipment for sampling tritium in environmental samples. The performance of prototype tritiated hydrocarbon samples is discussed. Data are presented on the content of tritium in samples of rain water collected in Miami, Florida, Western Samoa, and Barbados during 1975, and tritium compounds in atmospheric samples collected at various world locations during 1975. (CH)

  3. Report of the Task Group on operation Department of Energy tritium facilities

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report discusses the following topics on the operation of DOE Tritium facilities: Environment, Safety, and Health Aspects of Tritium; Management of Operations and Maintenance Functions; Safe Shutdown of Tritium Facilities; Management of the Facility Safety Envelope; Maintenance of Qualified Tritium Handling Personnel; DOE Tritium Management Strategy; Radiological Control Philosophy; Implementation of DOE Requirements; Management of Tritium Residues; Inconsistent Application of Requirements for Measurement of Tritium Effluents; Interdependence of Tritium Facilities; Technical Communication among Facilities; Incorporation of Confinement Technologies into New Facilities; Operation/Management Requirements for New Tritium Facilities; and Safety Management Issues at Department of Energy Tritium Facilities.

  4. [Mechanism of tritium persistence in porous media like clay minerals].

    Science.gov (United States)

    Wu, Dong-Jie; Wang, Jin-Sheng; Teng, Yan-Guo; Zhang, Ke-Ni

    2011-03-01

    To investigate the mechanisms of tritium persistence in clay minerals, three types of clay soils (montmorillonite, kaolinite and illite) and tritiated water were used in this study to conduct the tritium sorption tests and the other related tests. Firstly, the ingredients, metal elements and heat properties of clay minerals were studied with some instrumental analysis methods, such as ICP and TG. Secondly, with a specially designed fractionation and condensation experiment, the adsorbed water, the interlayer water and the structural water in the clay minerals separated from the tritium sorption tests were fractionated for investigating the tritium distributions in the different types of adsorptive waters. Thirdly, the location and configuration of tritium adsorbed into the structure of clay minerals were studied with infrared spectrometry (IR) tests. And finally, the forces and mechanisms for driving tritium into the clay minerals were analyzed on the basis of the isotope effect of tritium and the above tests. Following conclusions have been reached: (1) The main reason for tritium persistence in clay minerals is the entrance of tritium into the adsorbed water, the interlayer water and the structural water in clay minerals. The percentage of tritium distributed in these three types of adsorptive water are in the range of 13.65% - 38.71%, 0.32% - 5.96%, 1.28% - 4.37% of the total tritium used in the corresponding test, respectively. The percentages are different for different types of clay minerals. (2) Tritium adsorbed onto clay minerals are existed in the forms of the tritiated hydroxyl radical (OT) and the tritiated water molecule (HTO). Tritium mainly exists in tritiated water molecule for adsorbed water and interlayer water, and in tritiated hydroxyl radical for structural water. (3) The forces and effects driving tritium into the clay minerals may include molecular dispersion, electric charge sorption, isotope exchange and tritium isotope effect.

  5. Tritium time series in precipitation of Rm. Valcea, Romania.

    Science.gov (United States)

    Varlam, Carmen; Duliu, Octavian G; Faurescu, Ionut; Vagner, Irina; Faurescu, Denisa

    2016-01-01

    Following tritium concentration records in precipitation for the period 1999-2013 and tritium concentration behaviour during this period for the Ramnicu Valcea (Rm. Valcea) location, the tritium level of individual precipitations of the late spring and summer for the 2009-2013 period was investigated. Despite good correlation between monthly mean tritium concentrations and monthly mean precipitations over the 15-year period of observations (Pearson coefficient 0.87), the individual precipitations had no linear correlation between the tritium concentration and the amount of precipitation.

  6. Apparatus and method for stripping tritium from molten salt

    Science.gov (United States)

    Holcomb, David E.; Wilson, Dane F.

    2017-02-07

    A method of stripping tritium from flowing stream of molten salt includes providing a tritium-separating membrane structure having a porous support, a nanoporous structural metal-ion diffusion barrier layer, and a gas-tight, nonporous palladium-bearing separative layer, directing the flowing stream of molten salt into contact with the palladium-bearing layer so that tritium contained within the molten salt is transported through the tritium-separating membrane structure, and contacting a sweep gas with the porous support for collecting the tritium.

  7. Preliminary Tritium Management Design Activities at ORNL

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Felde, David K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Logsdon, Randall J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McFarlane, Joanna [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Qualls, A. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-09-01

    Interest in salt-cooled and salt-fueled reactors has increased over the last decade (Forsberg et al. 2016). Several private companies and universities in the United States, as well as governments in other countries, are developing salt reactor designs and/or technology. Two primary issues for the development and deployment of many salt reactor concepts are (1) the prevention of tritium generation and (2) the management of tritium to prevent release to the environment. In 2016, the US Department of Energy (DOE) initiated a research project under the Advanced Reactor Technology Program to (1) experimentally assess the feasibility of proposed methods for tritium mitigation and (2) to perform an engineering demonstration of the most promising methods. This document describes results from the first year’s efforts to define, design, and build an experimental apparatus to test potential methods for tritium management. These efforts are focused on producing a final design document as the basis for the apparatus and its scheduled completion consistent with available budget and approvals for facility use.

  8. Tritium forms discrimination in ryegrass under constant tritium exposure: From seed germination to seedling autotrophy.

    Science.gov (United States)

    Renard, H; Maro, D; Le Dizès, S; Escobar-Gutiérrez, A; Voiseux, C; Solier, L; Hébert, D; Rozet, M; Cossonnet, C; Barillot, R

    2017-10-01

    Uncertainties remain regarding the fate of atmospheric tritium after it has been assimilated in grasslands (ryegrass) in the form of TFWT (Tissue Free Water Tritium) or OBT (Organically Bound Tritium). One such uncertainty relates to the tritium forms discrimination during transfer from TFWT to OBT resulting from photosynthesis (OBTphoto), corresponding to the OBTphoto/TFWT ratio. In this study, the OBT/TFWT ratio is determined by experiments in the laboratory using a ryegrass model and hydroponic cultures, with constant activity of tritium in the form of tritiated water (denoted as HTO) in the "water" compartment (liquid HTO) and "air" compartment (HTO vapour in the air). The OBTphoto/TFWT ratio and the exchangeable OBT fraction are measured for three parts of the plant: the leaf, seed and root. Plant growth is modelled using dehydrated biomass measurements taken over time in the laboratory and integrating physiological functions of the plant during the first ten days after germination. The results suggest that there is no measurable discrimination of tritium in the plant organic matter produced by photosynthesis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Improving tritium exposure reconstructions using accelerator mass spectrometry

    Science.gov (United States)

    Hunt, J. R.; Vogel, J. S.; Knezovich, J. P.

    2010-01-01

    Direct measurement of tritium atoms by accelerator mass spectrometry (AMS) enables rapid low-activity tritium measurements from milligram-sized samples and permits greater ease of sample collection, faster throughput, and increased spatial and/or temporal resolution. Because existing methodologies for quantifying tritium have some significant limitations, the development of tritium AMS has allowed improvements in reconstructing tritium exposure concentrations from environmental measurements and provides an important additional tool in assessing the temporal and spatial distribution of chronic exposure. Tritium exposure reconstructions using AMS were previously demonstrated for a tree growing on known levels of tritiated water and for trees exposed to atmospheric releases of tritiated water vapor. In these analyses, tritium levels were measured from milligram-sized samples with sample preparation times of a few days. Hundreds of samples were analyzed within a few months of sample collection and resulted in the reconstruction of spatial and temporal exposure from tritium releases. Although the current quantification limit of tritium AMS is not adequate to determine natural environmental variations in tritium concentrations, it is expected to be sufficient for studies assessing possible health effects from chronic environmental tritium exposure. PMID:14735274

  10. Tritium release experiments with CATS and numerical simulation

    Energy Technology Data Exchange (ETDEWEB)

    Munakata, Kenzo, E-mail: kenzo@gipc.akita-u.ac.jp [Faculty of Engineering and Resource Sciences, Akita University, Tegata-gakuen-cho 1-1, Akita 010-8502 (Japan); Wajima, Takaaki; Hara, Keisuke; Wada, Kohei [Faculty of Engineering and Resource Sciences, Akita University, Tegata-gakuen-cho 1-1, Akita 010-8502 (Japan); Takeishi, Toshiharu; Shinozaki, Yohei; Mochizuki, Kazuhiro; Katekari, Kenichi [Interdisciplinary Graduate School of Engineering Science, Kyushu University, Hakozaki 6-10-1, Higashi-ku, Fukuoka 812-8581 (Japan); Kobayashi, Kazuhiro; Iwai, Yasunori; Hayashi, Takumi; Yamanishi, Toshihiko [Tritium Technology Group, Japan Atomic Energy Agency, Tokai, Ibaraki 319-1195 (Japan)

    2010-12-15

    In D-T fusion power plants, large amounts of tritium would be handled. Tritium is the radioisotope of protium, and is easily taken into the human body, and thus the behavior of tritium accidentally released in fusion power plants should be studied for the safety design and radioprotection of workers. Therefore, it is necessary to investigate the behavior of tritium released into large rooms with objectives, since complex flow fields should exist in such rooms and they could influence the ventilation of the air containing released tritium. Thus, tritium release experiments were conducted using Caisson Assembly for Tritium Safety Study (CATS) in TPL/JAEA. Some data were taken for tritium behavior in the ventilated area and response of tritium monitors. In the experiments, approximately 17 GBq of tritium was released into Caisson with the total volume of 12 m{sup 3}, and the room was ventilated at the rate of 12 m{sup 3}/h after release of tritium. It was found that placement of an objective in the vessel substantially affects decontamination efficiency. With regard to an experimental result, numerical calculation was performed and the experimental result and the result of numerical calculation were compared, which indicates that experimental results are qualitatively reproduced by numerical calculation. However, further R and D needs to be carried out for quantitative reproduction of the experimental results.

  11. Plasma wall interaction and tritium retention in TFTR

    Energy Technology Data Exchange (ETDEWEB)

    Skinner, C. H. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Amarescu, E. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Ascione, G. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Synakowski, E. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States)

    1996-05-01

    The Tokamak Fusion Test Reactor (TFTR) has been operating safely and routinely with deuterium-tritium fuel for more than two years. In this time, TFTR has produced an impressive number of record breaking results including core fusion power, ~ 2 MW/m³, comparable to that expected for ITER. Advances in wall conditioning via lithium pellet injection have played an essential role in achieving these results. Deuterium-tritium operation has also provided a special opportunity to address the issues of tritium recycling and retention. Tritium retention over two years of operation was approximately 40%. Recently, the in-torus tritium inventory was reduced by half through a combination of glow discharge cleaning, moist-air soaks, and plasma discharge cleaning. The tritium inventory is not a constraint in continued operations. The authors present recent results from TFTR in the context of plasma wall interactions and deuterium-tritium issues.

  12. Tokamak fusion reactors with less than full tritium breeding

    Energy Technology Data Exchange (ETDEWEB)

    Evans, K. Jr.; Gilligan, J.G.; Jung, J.

    1983-05-01

    A study of commercial, tokamak fusion reactors with tritium concentrations and tritium breeding ratios ranging from full deuterium-tritium operation to operation with no tritium breeding is presented. The design basis for these reactors is similar to those of STARFIRE and WILDCAT. Optimum operating temperatures, sizes, toroidal field strengths, and blanket/shield configurations are determined for a sequence of reactor designs spanning the range of tritium breeding, each having the same values of beta, thermal power, and first-wall heat load. Additional reactor parameters, tritium inventories and throughputs, and detailed costs are calculated for each reactor design. The disadvantages, advantages, implications, and ramifications of tritium-depleted operation are presented and discussed.

  13. On the mechanism of biological activation by tritium.

    Science.gov (United States)

    Rozhko, T V; Badun, G A; Razzhivina, I A; Guseynov, O A; Guseynova, V E; Kudryasheva, N S

    2016-06-01

    The mechanism of biological activation by beta-emitting radionuclide tritium was studied. Luminous marine bacteria were used as a bioassay to monitor the biological effect of tritium with luminescence intensity as the physiological parameter tested. Two different types of tritium sources were used: HTO molecules distributed regularly in the surrounding aqueous medium, and a solid source with tritium atoms fixed on its surface (tritium-labeled films, 0.11, 0.28, 0.91, and 2.36 MBq/cm(2)). When using the tritium-labeled films, tritium penetration into the cells was prevented. The both types of tritium sources revealed similar changes in the bacterial luminescence kinetics: a delay period followed by bioluminescence activation. No monotonic dependences of bioluminescence activation efficiency on specific radioactivities of the films were found. A 15-day exposure to tritiated water (100 MBq/L) did not reveal mutations in bacterial DNA. The results obtained give preference to a "non-genomic" mechanism of bioluminescence activation by tritium. An activation of the intracellular bioluminescence process develops without penetration of tritium atoms into the cells and can be caused by intensification of trans-membrane cellular processes stimulated by ionization and radiolysis of aqueous media. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Use of Tritium Accelerator Mass Spectrometry for Tree Ring Analysis

    Science.gov (United States)

    LOVE, ADAM H.; HUNT, JAMES R.; ROBERTS, MARK L.; SOUTHON, JOHN R.; CHIARAPPA - ZUCCA, MARINA L.; DINGLEY, KAREN H.

    2010-01-01

    Public concerns over the health effects associated with low-level and long-term exposure to tritium released from industrial point sources have generated the demand for better methods to evaluate historical tritium exposure levels for these communities. The cellulose of trees accurately reflects the tritium concentration in the source water and may contain the only historical record of tritium exposure. The tritium activity in the annual rings of a tree was measured using accelerator mass spectrometry to reconstruct historical annual averages of tritium exposure. Milligram-sized samples of the annual tree rings from a Tamarix located at the Nevada Test Site are used for validation of this methodology. The salt cedar was chosen since it had a single source of tritiated water that was well-characterized as it varied over time. The decay-corrected tritium activity of the water in which the salt cedar grew closely agrees with the organically bound tritium activity in its annual rings. This demonstrates that the milligram-sized samples used in tritium accelerator mass spectrometry are suited for reconstructing anthropogenic tritium levels in the environment. PMID:12144257

  15. Tritium Transport at the Rulison Site, a Nuclear-stimulated Low-permeability Natural Gas Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    C. Cooper; M. Ye; J. Chapman

    2008-04-01

    The U.S. Department of Energy (DOE) and its predecessor agencies conducted a program in the 1960s and 1970s that evaluated technology for the nuclear stimulation of low-permeability natural gas reservoirs. The second project in the program, Project Rulison, was located in west-central Colorado. A 40-kiltoton nuclear device was detonated 2,568 m below the land surface in the Williams Fork Formation on September 10, 1969. The natural gas reservoirs in the Williams Fork Formation occur in low permeability, fractured sandstone lenses interbedded with shale. Radionuclides derived from residual fuel products, nuclear reactions, and activation products were generated as a result of the detonation. Most of the radionuclides are contained in a cooled, solidified melt glass phase created from vaporized and melted rock that re-condensed after the test. Of the mobile gas-phase radionuclides released, tritium ({sup 3}H or T) migration is of most concern. The other gas-phase radionuclides ({sup 85}Kr, {sup 14}C) were largely removed during production testing in 1969 and 1970 and are no longer present in appreciable amounts. Substantial tritium remained because it is part of the water molecule, which is present in both the gas and liquid (aqueous) phases. The objectives of this work are to calculate the nature and extent of tritium contamination in the subsurface from the Rulison test from the time of the test to present day (2007), and to evaluate tritium migration under natural-gas production conditions to a hypothetical gas production well in the most vulnerable location outside the DOE drilling restriction. The natural-gas production scenario involves a hypothetical production well located 258 m horizontally away from the detonation point, outside the edge of the current drilling exclusion area. The production interval in the hypothetical well is at the same elevation as the nuclear chimney created by the detonation, in order to evaluate the location most vulnerable to

  16. Preliminary scoping safety analyses of the limiting design basis protected accidents for the Fast Flux Test Facility tritium production core

    Energy Technology Data Exchange (ETDEWEB)

    Heard, F.J.

    1997-11-19

    The SAS4A/SASSYS-l computer code is used to perform a series of analyses for the limiting protected design basis transient events given a representative tritium and medical isotope production core design proposed for the Fast Flux Test Facility. The FFTF tritium and isotope production mission will require a different core loading which features higher enrichment fuel, tritium targets, and medical isotope production assemblies. Changes in several key core parameters, such as the Doppler coefficient and delayed neutron fraction will affect the transient response of the reactor. Both reactivity insertion and reduction of heat removal events were analyzed. The analysis methods and modeling assumptions are described. Results of the analyses and comparison against fuel pin performance criteria are presented to provide quantification that the plant protection system is adequate to maintain the necessary safety margins and assure cladding integrity.

  17. Human factors engineering for the TERF (Tritium Emissions Reduction Facility) project. [Tritium Emissions Reduction Facility

    Energy Technology Data Exchange (ETDEWEB)

    Hedley, W.H.; Adams, F.S. (EG and G Mound Applied Technologies, Miamisburg, OH (USA)); Wells, J.E. (Lawrence Livermore National Lab., CA (USA))

    1990-12-14

    The Tritium Emissions Reduction Facility (TERF) is being built by EG G Mound Applied Technologies to provide improved control of the tritium emissions from gas streams being processed. Mound handles tritium in connection with production, development, research, disassembly, recovery, and surveillance operations. During these operations, a small fraction of the tritium being processed escapes from its original containment. The objective of this report is to describe the human factors engineering as performed in connection with the design, construction, and testing of the TERF as required in DOE Order 6430.1A, section 1300-12. Human factors engineering has been involved at each step of the process and was considered during the preliminary research on tritium capture before selecting the specific process to be used. Human factors engineering was also considered in determining the requirements for the TERF and when the specific design work was initiated on the facility and the process equipment. Finally, human factors engineering was used to plan the specific acceptance tests that will be made during TERF installation and after its completion. These tests will verify the acceptability of the final system and its components. 16 refs., 8 figs.

  18. Increase in the specific radioactivity of tritium-labeled compounds obtained by tritium thermal activation method

    Energy Technology Data Exchange (ETDEWEB)

    Badun, G.A.; Chernysheva, M.G. [Lomonosov Moscow State Univ., Moscow (Russian Federation). Radiochemistry Div.; Ksenofontov, A.L. [Lomonosov Moscow State Univ., Moscow (Russian Federation). N. Belozersky Institute of Physico-Chemical Biology

    2012-07-01

    A method of tritium introduction into different types of organic molecules that is based on the interaction of atomic tritium with solid organic target is described. Tritium atoms are formed on the hot W-wire, which is heated by the electric current. Such an approach is called 'tritium thermal activation method'. Here we summarize the results of labeling globular proteins (lysozyme, human and bovine serum albumins); derivatives of pantothenic acid and amino acids; ionic surfactants (sodium dodecylsulfate and alkyltrimethylammonium bromides) and nonionic high-molecular weight surfactants - pluronics. For the first time it is observed that if the target-compound is fixed and its radicals are stable the specific radioactivity of the labeled product can be drastically increased (up to 400 times) when the target temperature is ca. 295 K compared with the results obtained at 77 K. The influence of labeling parameters as tritium gas pressure, exposure time and W-wire temperature was tested for each target temperature that results in the optimum labeling conditions with high specific radioactivity and chemical yield of the resulting compound. (orig.)

  19. IN-SITU TRITIUM BETA DETECTOR

    Energy Technology Data Exchange (ETDEWEB)

    J.W. Berthold; L.A. Jeffers

    1998-04-15

    The objectives of this three-phase project were to design, develop, and demonstrate a monitoring system capable of detecting and quantifying tritium in situ in ground and surface waters, and in water from effluent lines prior to discharge into public waterways. The tritium detection system design is based on measurement of the low energy beta radiation from the radioactive decay of tritium using a special form of scintillating optical fiber directly in contact with the water to be measured. The system consists of the immersible sensor module containing the optical fiber, and an electronics package, connected by an umbilical cable. The system can be permanently installed for routine water monitoring in wells or process or effluent lines, or can be moved from one location to another for survey use. The electronics will read out tritium activity directly in units of pico Curies per liter, with straightforward calibration. In Phase 1 of the project, we characterized the sensitivity of fluor-doped plastic optical fiber to tritium beta radiation. In addition, we characterized the performance of photomultiplier tubes needed for the system. In parallel with this work, we defined the functional requirements, target specifications, and system configuration for an in situ tritium beta detector that would use the fluor-doped fibers as primary sensors of tritium concentration in water. The major conclusions from the characterization work are: A polystyrene optical fiber with fluor dopant concentration of 2% gave best performance. This fiber had the highest dopant concentration of any fibers tested. Stability may be a problem. The fibers exposed to a 22-day soak in 120 F water experienced a 10x reduction in sensitivity. It is not known whether this was due to the build up of a deposit (a potentially reversible effect) or an irreversible process such as leaching of the scintillating dye. Based on the results achieved, it is premature to initiate Phase 2 and commit to a prototype

  20. Tritium release from irradiated lithium aluminate, can it be improved

    Energy Technology Data Exchange (ETDEWEB)

    Kopasz, J.P.; Seils, C.A.; Johnson, C.E.

    1991-01-01

    Lithium aluminate is an attractive material (in terms of its chemical, mechanical and irradiation properties) for breeding tritium in fusion reactors; however, its tritium release characteristics are not as good as those of other candidate materials. To investigate whether tritium release from lithium aluminate can be improved, we have studied the tritium release from irradiated samples of pure lithium aluminate, lithium aluminate doped with Mg, and lithium aluminate with a surface deposit of platinum. The release was studied by the temperature programmed desorption (TPD) method. Both the platinum coating and magnesium doping were found to improve the tritium release characteristics, as determined by TPD. Tritium release shifted to states with lower activation energies for the altered materials.

  1. Tritium release from irradiated lithium aluminate, can it be improved?

    Energy Technology Data Exchange (ETDEWEB)

    Kopasz, J.P.; Seils, C.A.; Johnson, C.E.

    1991-12-31

    Lithium aluminate is an attractive material (in terms of its chemical, mechanical and irradiation properties) for breeding tritium in fusion reactors; however, its tritium release characteristics are not as good as those of other candidate materials. To investigate whether tritium release from lithium aluminate can be improved, we have studied the tritium release from irradiated samples of pure lithium aluminate, lithium aluminate doped with Mg, and lithium aluminate with a surface deposit of platinum. The release was studied by the temperature programmed desorption (TPD) method. Both the platinum coating and magnesium doping were found to improve the tritium release characteristics, as determined by TPD. Tritium release shifted to states with lower activation energies for the altered materials.

  2. TRIO-01 experiment: in-situ tritium-recovery results

    Energy Technology Data Exchange (ETDEWEB)

    Clemmer, R.G.; Finn, P.A.; Billone, M.C.; Misra, B.; Arons, R.M.; Poeppel, R.B.; Dyer, F.F.; Dudley, I.T.; Bate, L.C.; Clemmer, E.D.

    1983-08-01

    The TRIO-01 experiment is a test of in-situ tritium recovery from ..gamma..-LiAlO/sub 2/ with test conditions chosen to simulate those anticipated in fusion power reactors. A status report is presented which describes qualitatively the results observed during the irradiation phase of the experiment. Both the rate of tritium release and the chemical forms of tritium were measured using a helium sweep gas which flowed past the breeder material to a gas analysis system.

  3. New tritium and deuterium measurements in atmospheric hydrogen

    OpenAIRE

    Gonsior, Bernhard; Friedman, Irving; Lindenmayr, Georg

    2011-01-01

    Tritium and deuterium analysis were made on samples of atmospheric hydrogen collected in 1961. A positive correlation exists between tritium and deuterium. The heaviest samples yield a value of about +18% S.M.O.W. for atmospheric hydrogen. The deuterium concentration of the industrial hydrogen varies from ?18% to ?22%. The industrial hydrogen is partially ascribed to hydrogen from automobile exhaust gas. The corrected tritium concentration in atmospheric hydrogen continues to increase, doubl...

  4. Preliminary analysis of public dose from CFETR gaseous tritium release

    Energy Technology Data Exchange (ETDEWEB)

    Nie, Baojie [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); University of Science and Technology of China, Hefei, Anhui 230027 (China); Ni, Muyi, E-mail: muyi.ni@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Lian, Chao; Jiang, Jieqiong [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

    2015-02-15

    Highlights: • Present the amounts and limit dose of tritium release to the environment for CFETR. • Perform a preliminary simulation of radiation dose for gaseous tritium release. • Key parameters about soil types, wind speed, stability class, effective release height and age were sensitivity analyzed. • Tritium release amount is recalculated consistently with dose limit in Chinese regulation for CFETR. - Abstract: To demonstrate tritium self-sufficiency and other engineering issues, the scientific conception of Chinese Fusion Engineering Test Reactor (CFETR) has been proposed in China parallel with ITER and before DEMO reactor. Tritium environmental safety for CFETR is an important issue and must be evaluated because of the huge amounts of tritium cycling in reactor. In this work, different tritium release scenarios of CFETR and dose limit regulations in China are introduced. And the public dose is preliminarily analyzed under normal and accidental events. Furthermore, after finishing the sensitivity analysis of key input parameters, the public dose is reevaluated based on extreme parameters. Finally, tritium release amount is recalculated consistently with the dose limit in Chinese regulation for CFETR, which would provide a reference for tritium system design of CFETR.

  5. Hydrogen isotope distillation for the Tritium Systems Test Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Bartlit, J.R.; Denton, W.H.; Sherman, R.H.

    1978-01-01

    A system of four, interlinked, cryogenic fractional distillation columns has been designed as a prototype for fuel processing for fusion power reactors. The distillation system will continuously separate a feedstream of 360 g moles/day of roughly 50-50 deuterium-tritium containing approximately 1% H into four product streams: (1) a tritium-free stream of HD for waste disposal; (2) a stream of high-purity D/sub 2/ for simulated neutral beam injection; (3) a stream of DT for simulated reactor refueling; and (4) a stream of high purity T/sub 2/ for refueling and studies on properties of tritium and effects of tritium on materials.

  6. Biokinetic aspects of tissue-bound tritium in algae.

    Science.gov (United States)

    Strack, S; Kistner, G

    1978-01-01

    For the estimate of the radiation exposure of man and for the calculation of the risk of artificial tritium from nuclear power plants, organic tissue-bound tritium is of decisive importance. In model experiments, a tritium incorporation of 61 to 71% was found from tritiated water (HTO) into organic matter of planctonic algae under under reproducible conditions and this was related to the theoretical value. In further experiments the tritium release from these high tritiated algae was of interest. Kept in darkness in tritium-free, non-sterile river water, so that autolytic processes and bacterial decomposition could occur, the concentration of HTO was measured over a period of three weeks. A relatively long half-life of tissue-bound tritium was found under various temperature conditions. Therefore it must be considered that a significant retention of tritium in biological matter has to be taken into account in a natural ecosystem. In streams into which the cooling water of a nuclear reactor is released all conditions are found already for a long turnover and cycling of artificial tritium in living organisms as well as the conditions for a favourable transport of tritium by food chains to man.

  7. Tritium release during nuclear power operation in China.

    Science.gov (United States)

    Yang, D J; Chen, X Q; Li, B

    2012-06-01

    Overviews were evaluated of tritium releases and related doses to the public from airborne and liquid effluents from nuclear power plants on the mainland of China before 2009. The differences between tritium releases from various nuclear power plants were also evaluated. The tritium releases are mainly from liquid pathways for pressurised water reactors, but tritium releases between airborne and liquid effluents are comparable for heavy water reactors. The airborne release from a heavy water reactor is obviously higher than that from a pressurised water reactor.

  8. EFFECTS OF TRITIUM GAS EXPOSURE ON EPDM ELASTOMER

    Energy Technology Data Exchange (ETDEWEB)

    Clark, E.

    2009-12-11

    Samples of four formulations of ethylene-propylene diene monomer (EPDM) elastomer were exposed to initially pure tritium gas at one atmosphere and ambient temperature for various times up to about 420 days in closed containers. Two formulations were carbon-black-filled commercial formulations, and two were the equivalent formulations without filler synthesized for this work. Tritium effects on the samples were characterized by measuring the sample volume, mass, flexibility, and dynamic mechanical properties and by noting changes in appearance. The glass transition temperature was determined by analysis of the dynamic mechanical properties. The glass transition temperature increased significantly with tritium exposure, and the unfilled formulations ceased to behave as elastomers after the longest tritium exposure. The filled formulations were more resistant to tritium exposure. Tritium exposure made all samples significantly stiffer and therefore much less able to form a reliable seal when employed as O-rings. No consistent change of volume or density was observed; there was a systematic lowering of sample mass with tritium exposure. In addition, the significant radiolytic production of gas, mainly protium (H{sub 2}) and HT, by the samples when exposed to tritium was characterized by measuring total pressure in the container at the end of each exposure and by mass spectroscopy of a gas sample at the end of each exposure. The total pressure in the containers more than doubled after {approx}420 days tritium exposure.

  9. Tritium Formation and Mitigation in High-Temperature Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Piyush Sabharwall; Carl Stoots

    2012-10-01

    Tritium is a radiologically active isotope of hydrogen. It is formed in nuclear reactors by neutron absorption and ternary fission events and can subsequently escape into the environment. To prevent the tritium contamination of proposed reactor buildings and surrounding sites, this study examines the root causes and potential mitigation strategies for permeation of tritium (such as: materials selection, inert gas sparging, etc...). A model is presented that can be used to predict permeation rates of hydrogen through metallic alloys at temperatures from 450–750 degrees C. Results of the diffusion model are presented for a steady production of tritium

  10. Tritium Formation and Mitigation in High-Temperature Reactor Systems

    Energy Technology Data Exchange (ETDEWEB)

    Piyush Sabharwall; Carl Stoots; Hans A. Schmutz

    2013-03-01

    Tritium is a radiologically active isotope of hydrogen. It is formed in nuclear reactors by neutron absorption and ternary fission events and can subsequently escape into the environment. To prevent the tritium contamination of proposed reactor buildings and surrounding sites, this study examines the root causes and potential mitigation strategies for permeation of tritium (such as: materials selection, inert gas sparging, etc...). A model is presented that can be used to predict permeation rates of hydrogen through metallic alloys at temperatures from 450–750 degrees C. Results of the diffusion model are presented for a steady production of tritium

  11. TRITIUM BARRIER MATERIALS AND SEPARATION SYSTEMS FOR THE NGNP

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, S; Thad Adams, T

    2008-07-17

    Contamination of downstream hydrogen production plants or other users of high-temperature heat is a concern of the Next Generation Nuclear Plant (NGNP) Project. Due to the high operating temperatures of the NGNP (850-900 C outlet temperature), tritium produced in the nuclear reactor can permeate through heat exchangers to reach the hydrogen production plant, where it can become incorporated into process chemicals or the hydrogen product. The concentration limit for tritium in the hydrogen product has not been established, but it is expected that any future limit on tritium concentration will be no higher than the air and water effluent limits established by the NRC and the EPA. A literature survey of tritium permeation barriers, capture systems, and mitigation measures is presented and technologies are identified that may reduce the movement of tritium to the downstream plant. Among tritium permeation barriers, oxide layers produced in-situ may provide the most suitable barriers, though it may be possible to use aluminized surfaces also. For tritium capture systems, the use of getters is recommended, and high-temperature hydride forming materials such as Ti, Zr, and Y are suggested. Tritium may also be converted to HTO in order to capture it on molecular sieves or getter materials. Counter-flow of hydrogen may reduce the flux of tritium through heat exchangers. Recommendations for research and development work are provided.

  12. Tritium Plasma Experiment Upgrade and Improvement of Surface Diagnostic Capabilities at STAR Facility for Enhancing Tritium and Nuclear PMI Sciences

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, M.; Taylor, C. N.; Pawelko, R. J.; Cadwallader, L. C.; Merrill, B. J.

    2016-04-01

    The Tritium Plasma Experiment (TPE) is a unique high-flux linear plasma device that can handle beryllium, tritium, and neutron-irradiated plasma facing materials, and is the only existing device dedicated to directly study tritium retention and permeation in neutron-irradiated materials with tritium [M. Shimada et.al., Rev. Sci. Instru. 82 (2011) 083503 and and M. Shimada, et.al., Nucl. Fusion 55 (2015) 013008]. The plasma-material-interaction (PMI) determines a boundary condition for diffusing tritium into bulk PFCs, and the tritium PMI is crucial for enhancing fundamental sciences that dictate tritium fuel cycles and safety and are high importance to an FNSF and DEMO. Recently the TPE has undergone major upgrades in its electrical and control systems. New DC power supplies and a new control center enable remote plasma operations from outside of the contamination area for tritium, minimizing the possible exposure risk with tritium and beryllium. We discuss the electrical upgrade, enhanced operational safety, improved plasma performance, and development of optical spectrometer system. This upgrade not only improves operational safety of the worker, but also enhances plasma performance to better simulate extreme plasma-material conditions expected in ITER, Fusion Nuclear Science Facility (FNSF), and Demonstration reactor (DEMO). This work was prepared for the U.S. Department of Energy, Office of Fusion Energy Sciences, under the DOE Idaho Field Office contract number DE-AC07-05ID14517.

  13. Radiation protection with consumer products containing gaseous tritium light sources; Strahlenschutz bei Konsumguetern mit Tritium-Gaslichtquellen

    Energy Technology Data Exchange (ETDEWEB)

    Rahders, Erio; Haeusler, Uwe [Bundesamt fuer Strahlenschutz, Berlin (Germany)

    2017-08-01

    Consumer products containing gaseous tritium light sources (GTLS) were examined with respect to their radiological safety potential regarding leak tightness or accidents. The maximum tritium leakage rate of 2.7 Bq/d determined from experimental testing is well below the criterion for leak tightness of sealed radioactive sources in DIN 25426-4. In order to investigate the incorporation of tritium due to contact with consumer products, 2 scenarios were reviewed; the correct use of a tritium watch and the accident scenario with a keyring.

  14. Synthesis of tritium labelled 24-epibrassinolide

    Energy Technology Data Exchange (ETDEWEB)

    Kolbe, A.; Marquardt, V.; Adam, G. (Inst. of Plant Biochemistry Halle, Halle/Saale (Germany))

    1992-10-01

    Deuterium and tritium 5,7,7-tris-labelled 24-epibrassinolide were prepared by base catalyzed exchange reaction using 24-epicastasterone tetraacetate 1 or bis-isopropylidenedioxy-24-epicastasterone 8 and labelled water. Baeyer-Villiger oxidation of the obtained labelled 6-ketones 2 and 3 with CF[sub 3]CO[sub 3]H gave after alkaline deacetylation of the resulting 4 and 5 the desired tris-labelled 24-epibrassinolides 6 and 7, respectively, or starting from 9 under simultaneous oxidation and deprotection in one step the same final products. (author).

  15. Effectiveness Monitoring Report, MWMF Tritium Phytoremediation Interim Measures.

    Energy Technology Data Exchange (ETDEWEB)

    Hitchcock, Dan; Blake, John, I.

    2003-02-10

    This report describes and presents the results of monitoring activities during irrigation operations for the calendar year 2001 of the MWMF Interim Measures Tritium Phytoremediation Project. The purpose of this effectiveness monitoring report is to provide the information on instrument performance, analysis of CY2001 measurements, and critical relationships needed to manage irrigation operations, estimate efficiency and validate the water and tritium balance model.

  16. Cellular- and micro-dosimetry of heterogeneously distributed tritium.

    Science.gov (United States)

    Chao, Tsi-Chian; Wang, Chun-Ching; Li, Junli; Li, Chunyan; Tung, Chuan-Jong

    2012-01-01

    The assessment of radiotoxicity for heterogeneously distributed tritium should be based on the subcellular dose and relative biological effectiveness (RBE) for cell nucleus. In the present work, geometry-dependent absorbed dose and RBE were calculated using Monte Carlo codes for tritium in the cell, cell surface, cytoplasm, or cell nucleus. Penelope (PENetration and Energy LOss of Positrins and Electrons) code was used to calculate the geometry-dependent absorbed dose, lineal energy, and electron fluence spectrum. RBE for the intestinal crypt regeneration was calculated using a lineal energy-dependent biological weighting function. RBE for the induction of DNA double strand breaks was estimated using a nucleotide-level map for clustered DNA lesions of the Monte Carlo damage simulation (MCDS) code. For a typical cell of 10 μm radius and 5 μm nuclear radius, tritium in the cell nucleus resulted in much higher RBE-weighted absorbed dose than tritium distributed uniformly. Conversely, tritium distributed on the cell surface led to trivial RBE-weighted absorbed dose due to irradiation geometry and great attenuation of beta particles in the cytoplasm. For tritium uniformly distributed in the cell, the RBE-weighted absorbed dose was larger compared to tritium uniformly distributed in the tissue. Cellular- and micro-dosimetry models were developed for the assessment of heterogeneously distributed tritium.

  17. Influence of neutron irradiation on the tritium retention in beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Rolli, R.; Ruebel, S.; Werle, H. [Forschungszentrum Karlsruhe, Inst. fuer Neutronenphysik und Reaktortechnik, Karlsruhe (Germany); Wu, C.H.

    1998-01-01

    Carbon-based materials and beryllium are the candidates for protective layers on the components of fusion reactors facing plasma. In contact with D-T plasma, these materials absorb tritium, and it is anticipated that tritium retention increases with the neutron damage due to neutron-induced traps. Because of the poor data base for beryllium, the work was concentrated on it. Tritium was loaded into the samples from stagnant T{sub 2}/H{sub 2} atmosphere, and afterwards, the quantity of the loaded tritium was determined by purged thermal annealing. The specification of the samples is shown. The samples were analyzed by SEM before and after irradiation. The loading and the annealing equipments are contained in two different glove boxes with N{sub 2} inert atmosphere. The methods of loading and annealing are explained. The separation of neutron-produced and loaded tritium and the determination of loaded tritium in irradiated samples are reported. Also the determination of loaded tritium in unirradiated samples is reported. It is evident that irradiated samples contained much more loaded tritium than unirradiated samples. The main results of this investigation are summarized in the table. (K.I.)

  18. Effect of Tritium on Cracking Threshold in 7075 Aluminum

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Morgan, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-02-28

    The effect of long-term exposure to tritium gas on the cracking threshold (KTH) of 7075 Aluminum Alloy was investigated. The alloy is the material of construction for a cell used to contain tritium in an accelerator at Jefferson Laboratory designed for inelastic scattering experiments on nucleons. The primary safety concerns for the Jefferson Laboratory tritium cell is a tritium leak due to mechanical failure of windows from hydrogen isotope embrittlement, radiation damage, or loss of target integrity from accidental excessive beam heating due to failure of the raster or grossly mis-steered beam. Experiments were conducted to investigate the potential for embrittlement of the 7075 Aluminum alloy from tritium gas.

  19. Reassessment of tritium dose coefficients for the general public

    Energy Technology Data Exchange (ETDEWEB)

    Melintescu, A.; Galeriu, D. [Horia Hulubei National Institute of R and D for Physics and Nuclear Engineering, Department of Life and Environmental Physics, 407 Atomistilor St., PO Box MG-6, RO-077125 Bucharest-Magurele (Romania); Takeda, H. [National Institute of Radiological Sciences, Environmental and Toxicological Sciences Research Group, Chiba, 4-9-1, Anagawa, Inage-ku, Chiba-shi 263-8555 (Japan)

    2007-07-01

    Concerns of increased risk from tritium intake by humans have been claimed in the past. The arguments concerning the radiobiological effectiveness of tritium, its longer retention in the human body and the presence of tritium in the DNA hydration shell are analysed in this paper. A biokinetic model for tritiated water and organically bound tritium retention in the human body is used, based on a common approach for mammals using energy and hydrogen metabolism and tested separately with animal experiments. Extension to this model to humans considers the increased role of the brain, food quality and unique growth patterns of humans. Various ages and genders for Caucasians are considered. For an intake of tritium in organic forms in the diet, the retention for the female is of about a factor 2 compared with ICRP recommendations. Effective dose coefficients are estimated to be about a factor of 2 to 3 higher than those of the ICRP. (authors)

  20. Organically bound tritium analysis in environmental samples

    Energy Technology Data Exchange (ETDEWEB)

    Baglan, N. [CEA/DAM/DIF, Arpajon (France); Kim, S.B. [AECL, Chalk River Laboratories, Chalk River, ON (Canada); Cossonnet, C. [IRSN/PRP-ENV/STEME/LMRE, Orsay (France); Croudace, I.W.; Warwick, P.E. [GAU-Radioanalytical, University of Southampton, Southampton (United Kingdom); Fournier, M. [IRSN/DG/DMQ, Fontenay-aux-Roses (France); Galeriu, D. [IFIN-HH, Horia-Hulubei, Inst. Phys. and Nucl. Eng., Bucharest (Romania); Momoshima, N. [Kyushu University, Radioisotope Ctr., Fukuoka (Japan); Ansoborlo, E. [CEA/DEN/DRCP/CETAMA, Bagnols-sur-Ceze (France)

    2015-03-15

    Organically bound tritium (OBT) has become of increased interest within the last decade, with a focus on its behaviour and also its analysis, which are important to assess tritium distribution in the environment. In contrast, there are no certified reference materials and no standard analytical method through the international organization related to OBT. In order to resolve this issue, an OBT international working group was created in May 2012. Over 20 labs from around the world participated and submitted their results for the first intercomparison exercise results on potato (Sep 2013). The samples, specially-prepared potatoes, were provided in March 2013 to each participant. Technical information and results from this first exercise are discussed here for all the labs which have realised the five replicates necessary to allow a reliable statistical treatment. The results are encouraging as the increased number of participating labs did not degrade the observed dispersion of the results for a similar activity level. Therefore, the results do not seem to depend on the analytical procedure used. From this work an optimised procedure can start to be developed to deal with OBT analysis and will guide subsequent planned OBT trials by the international group.

  1. Experimental study of the tritium distribution in the effluents resulting from the sodium hydrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Chassery, A. [CEA, DEN, Centre de Cadarache, Saint-Paul-lez-Durance (France); Universite de Toulouse, Laboratoire de Genie Chimique, Toulouse (France); CNRS, Laboratoire de Genie Chimique, Toulouse (France); Lorcet, H.; Godlewski, J; Liger, K.; Latge, C. [CEA, DEN, Centre de Cadarache, Saint-Paul-lez-Durance (France); Joulia, X. [Universite de Toulouse, Laboratoire de Genie Chimique, Toulouse (France); CNRS, Laboratoire de Genie Chimique, Toulouse (France)

    2015-03-15

    Within the framework of the dismantling of fast breeder reactors in France several processes are under investigation regarding sodium disposal. One of them, called ELA (radioactive sodium waste treatment process), is based on the implementation of the sodium-water reaction, in a controlled and progressive way, to remove residual sodium. This sodium contains impurities such as sodium hydride, sodium oxide and tritiated sodium hydride. The hydrolysis of these various chemical species leads to the production of a liquid effluent, mainly composed of an aqueous solution of sodium hydroxide, and a gaseous effluent, mainly composed of nitrogen (inert gas), hydrogen and steam. The tritium is distributed between these effluents, and, within the gaseous effluent, according to its forms HT and HTO (tritiated water). HTO being 10,000 times more radio-toxic than HT, a precise knowledge of the mechanisms governing the phase distribution of tritium is necessary. This paper presents the first experimental results from a parametric study on the tritium distribution between the various effluents generated during hydrolysis operations. A series of experiments have been performed in order to study the influence of water flow rate, argon flow rate, initial mass and specific activity of the hydrolyzed sodium sample. An important influence of the total tritium concentration in the hydrolyzed sample has been highlighted. As for the phenomena suspected to be responsible for the phase change of tritiated water, in the studied range of parameters, vaporization induced by the heat of reactions seems to be dominant over the evaporation induced by the inert gas flow rate.

  2. Tritium and helium release from beryllium pebbles neutron-irradiated up to 230appm tritium and 3000appm helium

    Directory of Open Access Journals (Sweden)

    Vladimir Chakin

    2016-12-01

    Full Text Available Study of tritium and helium release from beryllium pebbles with diameters of 0.5 and 1mm after high-dose neutron irradiation at temperatures of 686–968K was performed. The release rate always has a single peak, and the peak temperatures at heating rates of 0.017K/s and 0.117K/s lie in the range of 1100–1350K for both tritium and helium release. The total tritium release from 1mm pebbles decreases considerably by increasing the irradiation temperature. The total tritium release from 0.5mm pebbles is less than that from 1mm pebbles and remains constant regardless of the irradiation temperature. At high irradiation temperatures, open channels are formed which contribute to the enhanced tritium release.

  3. Environmental health-risk assessment for tritium releases from the National Tritium Labeling Facility (NTLF) at Lawrence Berkeley Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    McKone, T.E.; Brand, K.P.

    1994-12-01

    This report is a health risk assessment that addresses continuous releases of tritium to the environment from the National Tritium Labeling Facility (NTLF) at the Lawrence Berkeley Laboratory (LBL). The NTLF contributes approximately 95% of all tritium releases from LBL. Transport and transformation models were used to determine the movement of tritium releases from the NRLF to the air, surface water, soils, and plants and to determine the subsequent doses to humans. These models were calibrated against environmental measurements of tritium levels in the vicinity of the NTLF and in the surrounding community. Risk levels were determined for human populations in each of these zones. Risk levels to both individuals and populations were calculated. In this report population risks and individual risks were calculated for three types of diseases--cancer, heritable genetic effects, and developmental and reproductive effects.

  4. Tritium retention in reduced-activation ferritic/martensitic steels

    Energy Technology Data Exchange (ETDEWEB)

    Hatano, Y.; Abe, S.; Matsuyama, M. [University of Toyama, Toyama (Japan); Alimov, V.K. [University of Toyama, Toyama (Japan); Max-Planck-Insitut fuer Plasmaphysik, EURATOM Association, Garching (Germany); Spitsyn, A.V.; Bobyr, N.P.; Cherkez, D.I.; Khripunov, B.I.; Golubeva, A.V. [NRC Kurchatov Institute, Moscow (Russian Federation); Ogorodnikova, O.V. [Max-Planck-Insitut fuer Plasmaphysik, EURATOM Assciation, Garching (Germany); Klimov, N.S. [SRC RF TRINITI, Troitsk (Russian Federation); Chernov, V.M. [JSC, A.A. Bochvar High-Technology Research Institute of Inorganic Materials, Moscow (Russian Federation); Oyaidzu, M.; Yamanishi, T. [Japan Atomic Energy Agency, Rokkasho-mura, Aomori (Japan)

    2015-03-15

    Reduced-activation ferritic/martensitic (RAFM) steels are structural material candidates for breeding blankets of future fusion reactors. Therefore, tritium (T) retention in RAFM steels is an important problem in assessing the T inventory of blankets. In this study, specimens of RAFM steels were subjected to irradiation of 20 MeV W ions to 0.54 displacements per atom (dpa), exposure to high flux D plasmas at 400 and 600 K and that to pulsed heat loads. The specimens thus prepared were exposed to DT gas at 473 K. Despite severe modification in the surface morphology, heat loads had negligible effects on T retention. Significant increase in T retention at the surface and/or subsurface was observed after D plasma exposure. However, T trapped at the surface/subsurface layer was easily removed by maintaining the specimens in the air at about 300 K. Displacement damage led to increase in T retention in the bulk due to the trapping effects of defects, and T trapped was stable at 300 K. It was therefore concluded that displacement damages had the largest influence on T retention under the present conditions.

  5. Burn performance of fast ignited, tritium-poor ICF fuels

    Science.gov (United States)

    Atzeni, S.; Ciampi, M. L.

    1997-12-01

    The potentials of fuels that are predominantly deuterium, with a small tritium content (tritium-poor deuterium), are examined in the context of the inertial confinement fusion (ICF) scheme known as `fast ignitor', which is based on external heating of a portion of a precompressed target. For this purpose, the burn performance of compressed spheres of pure or nearly pure deuterium with an off-centre deuterium-tritium (DT) seed, ignited by an ultrapowerful external beam, has been studied using two dimensional (2-D) numerical simulations. The dependences of the fuel energy gain on the fuel mass and energy, and on the tritium fractional content FT, have been studied; limiting gain curves have been obtained for fixed values of FT and of the isentrope parameter alpha . It is found that assemblies with FT=0.5-1%, fuel mass m approximately=20 mg, compressed at density rho approximately=1000 g/cm3, can achieve tritium self-sufficiency (i.e. net tritium production). At alpha approximately=1.5, the corresponding fuel energy at ignition is of the order of 1 MJ and the fuel energy gain can be about 1000. The potentials of tritium-poor configurations are also compared with those of equimolar DT fuels with different ignition configurations

  6. Recent Upgrades at the Safety and Tritium Applied Research Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, Lee Charles [Idaho National Laboratory; Merrill, Brad Johnson [Idaho National Laboratory; Stewart, Dean Andrew [Idaho National Laboratory; Loftus, Larry Shayne [Idaho National Laboratory

    2016-03-01

    This paper gives a brief overview of the Safety and Tritium Applied Research (STAR) facility operated by the Fusion Safety Program (FSP) at the Idaho National Laboratory (INL). FSP researchers use the STAR facility to carry out experiments in tritium permeation and retention in various fusion materials, including wall armor tile materials. FSP researchers also perform other experimentation as well to support safety assessment in fusion development. This lab, in its present two-building configuration, has been in operation for over ten years. The main experiments at STAR are briefly described. This paper discusses recent work to enhance personnel safety at the facility. The STAR facility is a Department of Energy less than hazard category 3 facility; the personnel safety approach calls for ventilation and tritium monitoring for radiation protection. The tritium areas of STAR have about 4 to 12 air changes per hour, with air flow being once through and then routed to the facility vent stack. Additional radiation monitoring has been installed to read the laboratory room air where experiments with tritium are conducted. These ion chambers and bubblers are used to verify that no significant tritium concentrations are present in the experiment rooms. Standby electrical power has been added to the facility exhaust blower so that proper ventilation will now operate during commercial power outages as well as the real-time tritium air monitors.

  7. Current understanding of organically bound tritium (OBT) in the environment.

    Science.gov (United States)

    Kim, S B; Baglan, N; Davis, P A

    2013-12-01

    It has become increasingly recognized that organically bound tritium (OBT) is the more significant tritium fraction with respect to understanding tritium behaviour in the environment. There are many different terms associated with OBT; such as total OBT, exchangeable OBT, non-exchangeable OBT, soluble OBT, insoluble OBT, tritiated organics, and buried tritium, etc. A simple classification is required to clarify understanding within the tritium research community. Unlike for tritiated water (HTO), the environmental quantification and behaviour of OBT are not well known. Tritiated water cannot bio-accumulate in the environment. However, it is not clear whether or not this is the case for OBT. Even though OBT can be detected in terrestrial biological materials, aquatic biological materials and soil samples, its behaviour is still in question. In order to evaluate the radiation dose from OBT accurately, further study will be required to understand OBT measurements and determine OBT fate in the environment. The relationship between OBT speciation and the OBT/HTO ratio in environmental samples will be useful in this regard, providing information on the previous tritium exposure conditions in the environment and the current tritium dynamics. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  8. Studying of tritium content in snowpack of Degelen mountain range.

    Science.gov (United States)

    Turchenko, D V; Lukashenko, S N; Aidarkhanov, A O; Lyakhova, O N

    2014-06-01

    The paper presents the results of investigation of tritium content in the layers of snow located in the streambeds of the "Degelen" massif contaminated with tritium. The objects of investigation were selected watercourses Karabulak, Uzynbulak, Aktybai located beyond the "Degelen" site. We studied the spatial distribution of tritium relative to the streambed of watercourses and defined the borders of the snow cover contamination. In the centre of the creek watercourses the snow contamination in the surface layer is as high as 40 000 Bq/L. The values of the background levels of tritium in areas not related to the streambed, which range from 40 to 50 Bq/L. The results of snow cover measurements in different seasonal periods were compared. The main mechanisms causing tritium transfer in snow were examined and identified. The most important mechanism of tritium transfer in the streams is tritium emanation from ice or soil surface. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Accelerator Production of Tritium Programmatic Environmental Impact Statement Input Submittal

    Energy Technology Data Exchange (ETDEWEB)

    Miller, L.A. [Sandia National Labs., Albuquerque, NM (United States); Greene, G.A. [Brookhaven National Lab., Upton, NY (United States); Boyack, B.E. [Los Alamos National Lab., NM (United States)

    1996-02-01

    The Programmatic Environmental Impact Statement for Tritium Supply and Recycling considers several methods for the production of tritium. One of these methods is the Accelerator Production of Tritium. This report summarizes the design characteristics of APT including the accelerator, target/blanket, tritium extraction facility, and the balance of plant. Two spallation targets are considered: (1) a tungsten neutron-source target and (2) a lead neutron-source target. In the tungsten target concept, the neutrons are captured by the circulating He-3, thus producing tritium; in the lead target concept, the tritium is produced by neutron capture by Li-6 in a surrounding lithium-aluminum blanket. This report also provides information to support the PEIS including construction and operational resource needs, waste generation, and potential routine and accidental releases of radioactive material. The focus of the report is on the impacts of a facility that will produce 3/8th of the baseline goal of tritium. However, some information is provided on the impacts of APT facilities that would produce smaller quantities.

  10. Tritium: An analysis of key environmental and dosimetric questions

    Energy Technology Data Exchange (ETDEWEB)

    Till, J E; Meyer, H R; Etnier, E L; Bomar, E S; Gentry, R D; Killough, G G; Rohwer, P S; Tennery, V J; Travis, C C

    1980-05-01

    This document summarizes new theoretical and experimental data that may affect the assessment of environmental releases of tritium and analyzes the significance of this information in terms of the dose to man. Calculated doses resulting from tritium releases to the environment are linearly dependent upon the quality factor chosen for tritium beta radiation. A reevaluation of the tritium quality factor by the ICRP is needed; a value of 1.7 would seem to be more justifiable than the old 1.0 value. A new exposure model is proposed, based primarily upon the approach recommended by the National Council on Radiation Protection and Measurements. Employing a /open quotes/typical/close quotes/ LMFBR reprocessing facility source term, a /open quotes/base case/close quotes/ dose commitment to total body (for a maximally exposed individual) was calculated to be 4.0 /times/ 10/sup /minus/2/ mSv, with 3.2 /times/ 10/sup /minus// mSv of the dose due to intake of tritium. The study analyzes models which exist for evaluating the buildup of global releases of tritium from man-made sources. Scenarios for the release of man-made tritium to the environment and prediction of collective dose commitment to future generations suggest that the dose from nuclear weapons testing will be less than that from nuclear energy even though the weapons source term is greater than that for any of our energy scenarios.

  11. The lichens, tritium and carbon 14 integrators; Les lichens, integrateurs de tritium et de carbone 14

    Energy Technology Data Exchange (ETDEWEB)

    Daillant, O

    2007-07-01

    The present report concerns a research for the tritium and for the carbon 14 in lichens in a spirit of bio-indication: the first results appear in Daillant and al (2004 ) and additional results were presented to the congress B.I.O.M.A.P. in Slovenia, organized collectively by the institute Josef Stefan from Ljubljana and the international atomic energy agency from Vienna (Daillant and al 2003). (N.C.)

  12. Long-term permeator experiment PETRA at the tritium laboratory Karlsruhe: commissioning tests with tritium

    Energy Technology Data Exchange (ETDEWEB)

    Penzhorn, R.D.; Berndt, U.; Kirste, E.; Hellriegel, W.; Jung, W.; Pejsa, R.; Romer, O. [Research Center Karlsruhe (Germany)

    1995-10-01

    During the commissioning of the PETRA facility, the PETRA PdAg permeator was characterized using hydrogen isotopes by determining the hydrogen curves for H{sub 2}, D{sub 2} and DT as well as He curves for various H{sub 2}/D{sub 2}/He gas mixtures at 300 and 400{degree}C. A method was developed to verify the mechanical integrity of the permeator during runs with the tritium. The H{sub 2} and D{sub 2} permeation losses into the isolation vacuum of the permeator were quantified. Hydrogen permeation into the isolation vacuum could be kept at levels low enough to permit an undisturbed continuous operation of the permeator using a ZrCo tritium storage vessel. It was shown that the combination of the PETRA facility with a Normetex scroll pump, it is possible to extract at <320{degree}C >98% of the hydrogen isotopes from the ZrCo storage vessel with (a) negligible permeation losses, (b) without the danger of disproportionation of the intermetallic compound and (c) with the minimization of the tritium inventory in the facility. 5 refs., 13 figs., 1 tab.

  13. Enhanced activities of organically bound tritium in biota samples.

    Science.gov (United States)

    Svetlik, I; Fejgl, M; Malátová, I; Tomaskova, L

    2014-11-01

    A pilot study aimed on possible occurrence of elevated activity of non-exchangable organically bound tritium (NE-OBT) in biota was performed. The first results showed a significant surplus of NE-OBT activity in biota of the valley of Mohelno reservoir and Jihlava river. The liquid releases of HTO from the nuclear power plant Dukovany is the source of tritium in this area. This area can be a source of various types of natural samples for future studies of tritium pathways. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Measurement of tritium in the Sava and Danube Rivers.

    Science.gov (United States)

    Grahek, Željko; Breznik, Borut; Stojković, Ivana; Coha, Ivana; Nikolov, Jovana; Todorović, Nataša

    2016-10-01

    Two nuclear power plants (NPP), the KrškoNPP (Slovenia) on the Sava River and the Paks NPP (Hungary) on the Danube River, are located in the immediate vicinity of Croatia and Serbia. Some of the radioactivity monitoring around the NPPs involves measuring tritium activity in the waters of rivers and wells. The authors present the tritium measurement results taken over several years from the Sava and Danube Rivers, and groundwater. The measurements were carried out in two laboratories including an impact assessment of the tritium released into the rivers and groundwater. The routine methods for determining tritium (with/without electrolytic enrichment) were tested in two laboratories using two different instruments, a Tri-Carb 3180 and Quantulus 1220. Detection limits for routine measurements were calculated in compliance with ISO 11929 and Currie relations, and subsequently the results were compared with those determined experimentally. This has shown that tritium can be reliably determined within a reasonable period of time when its activity is close to the calculated detection limit. The Krško NPP discharged 62 TBq of tritium into the River Sava over a period of 6 years (23% of permitted activity, 45 TBq per year). The natural level of tritium in the Sava River and groundwater is 0.3-1 Bq/l and increases when discharges exceed 1 TBq per month. Usually, the average monthly activity in the Sava River and groundwater is maintained at a natural level. The maximum measured activity was 16 Bq/l in the Sava River and 9.5 Bq/l in groundwater directly linked to the river. In the majority of water samples from the Danube River, measured tritium activity ranged between 1 and 2 Bq/l. The increased tritium levels in the Danube River are more evident than in the Sava River because tritium activity above 1.5 Bq/l appears more frequently on the Danube River. All measured values were far below the allowed tritium limit in drinking water. Dose assessment has shown that

  15. Tritium Formation and Mitigation in High Temperature Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Piyush Sabharwall; Carl Stoots

    2012-08-01

    Tritium is a radiologically active isotope of hydrogen. It is formed in nuclear reactors by neutron absorption and ternary fission events and can subsequently escape into the environment. In order to prevent the tritium contamination of proposed reactor buildings and surrounding sites, this paper examines the root causes and potential solutions for the production of this radionuclide, including materials selection and inert gas sparging. A model is presented that can be used to predict permeation rates of hydrogen through metallic alloys at temperatures from 450–750°C. Results of the diffusion model are presented for one steadystate value of tritium production in the reactor.

  16. Commercial Light Water Reactor Tritium Extraction Facility

    Energy Technology Data Exchange (ETDEWEB)

    McHood, M D

    2000-10-12

    A geotechnical investigation program has been completed for the Commercial Light Water Reactor - Tritium Extraction Facility (CLWR-TEF) at the Savannah River Site (SRS). The program consisted of reviewing previous geotechnical and geologic data and reports, performing subsurface field exploration, field and laboratory testing, and geologic and engineering analyses. The purpose of this investigation was to characterize the subsurface conditions for the CLWR-TEF in terms of subsurface stratigraphy and engineering properties for design and to perform selected engineering analyses. The objectives of the evaluation were to establish site-specific geologic conditions, obtain representative engineering properties of the subsurface and potential fill materials, evaluate the lateral and vertical extent of any soft zones encountered, and perform engineering analyses for slope stability, bearing capacity and settlement, and liquefaction potential. In addition, provide general recommendations for construction and earthwork.

  17. HEAT TRANSFER AND TRITIUM PRODUCING SYSTEM

    Science.gov (United States)

    Johnson, E.F.

    1962-06-01

    This invention related to a circulating lithium-containing blanket system in a neution source hav'ing a magnetic field associated therewith. The blanket serves simultaneously and efficiently as a heat transfer mediunm and as a source of tritium. The blanket is composed of a lithium-6-enriched fused salt selected from the group consisting of lithium nitrite, lithium nitrate, a mixture of said salts, a mixture of each of said salts with lithium oxide, and a mixture of said salts with each other and with lithium oxide. The moderator, which is contained within the blanket in a separate conduit, can be water. A stellarator is one of the neutron sources which can be used in this invention. (AEC)

  18. Synthesis of some useful tritium labelled auxins

    Energy Technology Data Exchange (ETDEWEB)

    Buchman, O.; Pri-Bar, I.; Shimoni, M.; Azran, J. (Israel Atomic Energy Commission, Beersheba (Israel). Nuclear Research Center-Negev)

    1992-06-01

    The synthesis of six useful auxins labelled with tritium is described. The following compounds were prepared: 3-indoleacetic acid-5-[sup 3]H (28.9 Ci-1.07 TBq/mmol), 3-indolebutyric acid-5-[sup 3]H (7.3 Ci-270 GBq/mmol), 1-naphthylacetic acid-4-[sup 3]H (27.6 Ci-1.02 TBq/mmol), 2,4-dichloropheno-xyacetic acid-5-[sup 3]H (18.5 Ci-685 GBq/mmol), 2(2,4-dichlorophenoxy-5-[sup 3]H) -propionic acid (20.7 Ci-766 GBq/mmol), 2(2,4-dichlorophenoxy)-propionic acid-3-[sup 3]H (0.39 Ci-14.4 GMq/mmol), and 4-chlorophenoxyacetic acid-2-[sup 3]H (13.3 Ci-492 GBq/mmol). (author).

  19. Tritium-powered radiation sensor network

    Science.gov (United States)

    Litz, Marc S.; Russo, Johnny A.; Katsis, Dimos

    2016-05-01

    Isotope power supplies offer long-lived (100 years using 63Ni), low-power energy sources, enabling sensors or communications nodes for the lifetime of infrastructure. A tritium beta-source (12.5-year half-life) encapsulated in a phosphor-lined vial couples directly to a photovoltaic (PV) to generate a trickle current into an electrical load. An inexpensive design is described using commercial-of-the-shelf (COTS) components that generate 100 μWe for nextgeneration compact electronics/sensors. A matched radiation sensor has been built for long-duration missions utilizing microprocessor-controlled sleep modes, low-power electronic components, and a passive interrupt driven environmental wake-up. The low-power early-warning radiation detector network and isotope power source enables no-maintenance mission lifetimes.

  20. Recommendations for Tritium Science and Technology Research and Development in Support of the Tritium Readiness Campaign, TTP-7-084

    Energy Technology Data Exchange (ETDEWEB)

    Senor, David J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-10-30

    Between 2006 and 2012 the Tritium Readiness Campaign Development and Testing Program produced significant advances in the understanding of in-reactor TPBAR performance. Incorporating these data into existing TPBAR performance models has improved permeation predictions, and the discrepancy between predicted and observed tritium permeation in the WBN1 coolant has been decreased by about 30%. However, important differences between predicted and observed permeation still remain, and there are significant knowledge gaps that hinder the ability to reliably predict other aspects of TPBAR performance such as tritium distribution, component integrity, and performance margins. Based on recommendations from recent Tritium Readiness Campaign workshops and reviews coupled with technical and programmatic priorities, high-priority activities were identified to address knowledge gaps in the near- (3-5 year), middle- (5-10 year), and long-term (10+ year) time horizons. It is important to note that there are many aspects to a well-integrated research and development program. The intent is not to focus exclusively on one aspect or another, but to approach the program in a holistic fashion. Thus, in addition to small-scale tritium science studies, ex-reactor tritium technology experiments such as TMED, and large-scale in-reactor tritium technology experiments such as TMIST, a well-rounded research and development program must also include continued analysis of WBN1 performance data and post-irradiation examination of TPBARs and lead use assemblies to evaluate model improvements and compare separate-effects and integral component behavior.

  1. Measured and modelled tritium concentrations in freshwater Barnes mussels (Elliptio complanata) exposed to an abrupt increase in ambient tritium levels.

    Science.gov (United States)

    Yankovich, T L; Kim, S B; Baumgärtner, F; Galeriu, D; Melintescu, A; Miyamoto, K; Saito, M; Siclet, F; Davis, P

    2011-01-01

    To improve understanding of environmental tritium behaviour, the International Atomic Energy Agency (IAEA) included a Tritium and C-14 Working Group (WG) in its EMRAS (Environmental Modelling for Radiation Safety) program. One scenario considered by the WG involved the prediction of time-dependent tritium concentrations in freshwater mussels that were subjected to an abrupt increase in ambient tritium levels. The experimental data used in the scenario were obtained from a study in which freshwater Barnes mussels (Elliptio complanata) were transplanted from an area with background tritium concentrations to a small Canadian Shield lake that contains elevated tritium. The mussels were then sampled over 88 days, and concentrations of free-water tritium (HTO) and organically-bound tritium (OBT) were measured in the soft tissues to follow the build-up of tritium in the mussels over time. The HTO concentration in the mussels reached steady state with the concentration in lake water within one or two hours. Most models predicted a longer time (up to a few days) to equilibrium. All models under-predicted the OBT concentration in the mussels one hour after transplantation, but over-predicted the rate of OBT formation over the next 24h. Subsequent dynamics were not well modelled, although all participants predicted OBT concentrations that were within a factor of three of the observation at the end of the study period. The concentration at the final time point was over-predicted by all but one of the models. The relatively low observed concentration at this time was likely due to the loss of OBT by mussels during reproduction. Copyright © 2010 Elsevier Ltd. All rights reserved.

  2. Development of Tritium Permeation Analysis Code and Tritium Transport in a High Temperature Gas-Cooled Reactor Coupled with Hydrogen Production System

    Energy Technology Data Exchange (ETDEWEB)

    Chang H. Oh; Eung S. Kim; Mike Patterson

    2010-06-01

    Abstract – A tritium permeation analyses code (TPAC) was developed by Idaho National Laboratory for the purpose of analyzing tritium distributions in very high temperature reactor (VHTR) systems, including integrated hydrogen production systems. A MATLAB SIMULINK software package was used in developing the code. The TPAC is based on the mass balance equations of tritium-containing species and various forms of hydrogen coupled with a variety of tritium sources, sinks, and permeation models. In the TPAC, ternary fission and neutron reactions with 6Li, 7Li 10B, and 3He were taken into considerations as tritium sources. Purification and leakage models were implemented as main tritium sinks. Permeation of tritium and H2 through pipes, vessels, and heat exchangers were considered as main tritium transport paths. In addition, electroyzer and isotope exchange models were developed for analyzing hydrogen production systems, including high temperature electrolysis and sulfur-iodine processes.

  3. Assessment of tritium in the Savannah River Site environment

    Energy Technology Data Exchange (ETDEWEB)

    Carlton, W.H.; Murphy, C.E. Jr.; Bauer, L.R. [and others

    1993-10-01

    This report is the first revision to a series of reports on radionuclides inn the SRS environment. Tritium was chosen as the first radionuclide in the series because the calculations used to assess the dose to the offsite population from SRS releases indicate that the dose due to tritium, through of small consequence, is one of the most important the radionuclides. This was recognized early in the site operation, and extensive measurements of tritium in the atmosphere, surface water, and ground water exist due to the effort of the Environmental Monitoring Section. In addition, research into the transport and fate of tritium in the environment has been supported at the SRS by both the local Department of Energy (DOE) Office and DOE`s Office of Health and Environmental Research.

  4. Tritium monitoring in the environment of the French territory

    Energy Technology Data Exchange (ETDEWEB)

    Leprieur, F.; Roussel-Debet, S.; Pierrard, O.; Tournieux, D.; Boissieux, T.; Caldera-Ideias, P. [Institut de radioprotection et de surete nucleaire (France)

    2014-07-01

    Introduction: Radioactive releases in the environment from civilian and military nuclear facilities have significantly decreased over the last few decades, except for discharges of tritium which are forecast to increase due to changes in the fuel management in power plants and in the longer term by new tritium-emitting units (fusion reactors). In the aim to perform its radiological monitoring mission throughout the French territory, IRSN uses and develops advanced technology equipment to sample and to analyze tritium in the different environmental compartments. Methodology: IRSN uses bubblers to collect both tritium vapour (HTO) and gaseous tritium (mainly HT) in the air. Another method, developed by IRSN, consists in directly sampling the water vapour in the air by condensing in a cold trap and more recently with passive sampler. In continental and marine surface water, samples are usually collected by automatic water samplers. Instantaneous surface water samples are also collected by grab sample devices. In addition, IRSN conducts animal and plant samples near French nuclear facilities. Natural origin and tritium remaining from testing of nuclear weapons In the atmosphere, the background levels of tritium of 1 to 2 Bq/L measured in water vapour, equivalent to an activity of 0.01 to 0.02 Bq/m{sup 3} of air. In fresh waters, the tritium activity currently ranges between 1 and 3 Bq/L of water. In the marine environment, tritium emitted during nuclear weapon tests has been totally 'diluted' in cosmogenic tritium and concentration levels at the surface have remained around 0.1 to 0.2 Bq/L. In biological matrices, total tritium concentration range from 1 to 3 Bq/kg f.w. with a variable proportion of free and organically bounded forms. Tritium around nuclear facilities: Close to facilities releasing more than 2x10{sup 13} Bq/year of gaseous tritium, higher activity levels, ranging from a few tens to a few hundred Bq/L, are observed in the atmospheric and

  5. Binder-free Na-mordenite pellets for tritium processing

    Energy Technology Data Exchange (ETDEWEB)

    Toci, F. [Safety Technology Inst., JRC, Ispra (Italy); Viola, A. [Dept. of Chemical Engineering, Cagliari Univ. (Italy); Edwards, R.A.H. [Safety Technology Inst., JRC, Ispra (Italy); Mencarelli, T. [Safety Technology Inst., JRC, Ispra (Italy); Brossa, P. [Safety Technology Inst., JRC, Ispra (Italy)

    1995-12-31

    Gas separation systems based on adsorption on zeolites are used in various applications involving tritium: air and inert gas detritiation, purification of Q{sub 2} and Q{sub 2}O, and isotope separation. Differential adsorption processes are attractive because efficient separation can be combined with small plant dimensions, low energy consumption and a small tritium inventory. Zeolites are the usual choice for the adsorbate because they combine high adsorption capacity with high selectivity and stability. However, commercial pellets show appreciable tritium retention due to inappropriate activation procedures or the presence of a binder. In this paper we report a research study aimed at producing a pelletized zeolite without binder (self-bound) with low tritium retention. (orig.).

  6. Evaluation model and experimental validation of tritium in agricultural plant

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hee Suk; Keum, Dong Kwon; Lee, Han Soo; Jun, In; Choi, Yong Ho; Lee, Chang Woo [KAERI, Daejon (Korea, Republic of)

    2005-12-15

    This paper describes a compartment dynamic model for evaluating the contamination level of tritium in agricultural plants exposed by accidentally released tritium. The present model uses a time dependent growth equation of plant so that it can predict the effect of growth stage of plant during the exposure time. The model including atmosphere, soil and plant compartments is described by a set of nonlinear ordinary differential equations, and is able to predict time-dependent concentrations of tritium in the compartments. To validate the model, a series of exposure experiments of HTO vapor on Chinese cabbage and radish was carried out at the different growth stage of each plant. At the end of exposure, the tissue free water(TFWT) and the organically bound tritium (OBT) were measured. The measured concentrations were agreed well with model predictions.

  7. Synthesis of tritium-labeled vitamin A and its analogs

    Energy Technology Data Exchange (ETDEWEB)

    Rhee, S.W.; Bubb, J.E.

    1985-11-01

    Metabolic and pharmacologic studies of Vitamin A and its analogs related to the prevention of lung cancer and other epithelial cancers required tritium-labeled Vitamin A analogs and ..beta..-carotene at high specific activity. Syntheses of some of the isomers were therefore developed in the laboratory, as described in the paper. The advantages of the scheme shown are that : 1. Tritiums are introduced into the molecule by catalytic hydrogenation, thus affording high specific activity. 2. It uses an allylic rearrangement of tritiated vinyl-..beta..-ionol to C/sub 15/-phosphonium salt, which is condensed with C/sub 5/-nitrile to give C/sub 20/-skeleton of retinonitrile. 3. It permits the development of milder methods to convert tritium-labeled retinaldehyde, as a common intermediate, to the other retinoids (i.e., retinoic acid, retinol, and retinyl acetate). Furthermore, tritium-labeled all-trans-..beta..-carotene, an important carotenoid, has been obtained from the retinaldehyde.

  8. Tritium Systems Test Assembly: design for major device fabrication review

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, J.L.; Sherman, R.H.

    1977-06-01

    This document has been prepared for the Major Device Fabrication Review for the Tritium Systems Test Assembly (TSTA). The TSTA is dedicated to the development, demonstration, and interfacing of technologies related to the deuterium-tritium fuel cycle for fusion reactor systems. The principal objectives for TSTA are: (a) demonstrate the fuel cycle for fusion reactor systems; (b) develop test and qualify equipment for tritium service in the fusion program; (c) develop and test environmental and personnel protective systems; (d) evaluate long-term reliability of components; (e) demonstrate long-term safe handling of tritium with no major releases or incidents; and (f) investigate and evaluate the response of the fuel cycle and environmental packages to normal, off-normal, and emergency situations. This document presents the current status of a conceptual design and cost estimate for TSTA. The total cost to design, construct, and operate TSTA through FY-1981 is estimated to be approximately $12.2 M.

  9. Distribution and transport of tritium in the Peach Bottom HTGR

    Energy Technology Data Exchange (ETDEWEB)

    Wichner, R.P.; Dyer, F.F.

    1979-08-01

    This report completes the first phase of a two-phase effort to describe and understand tritium production and movement in an operating high-temperature gas-cooled reactor (HTGR) system. The principal objective of phase 1 is to report the findings on tritium concentrations in core components acquired during the Peach Bottom Surveillance Program, which dealt with fission product migration in general, and a follow-on task devoted specifically to tritium. Administrative procedures are being developed for the second phase of the work to be performed in the Federal Republic of Germany under the auspices of the international umbrella agreement on gas-cooled reactor (GCR) development. In this effort, computer model predictions of tritium transport in the reactor system will be compared with observed concentration levels.

  10. Das Radionuklid Tritium im Ozean: essverfahren und Verteilung von Tritium im Sudatlantik und im Weddellmeer = The radionuclide Tritium in the ocean : measurements and distribution of tritium in the South Atlantic and the Weddell Sea

    National Research Council Canada - National Science Library

    Sultenfuss, J

    1998-01-01

    In this thesis the parameter of a system for routine measurements of oceanic tritium samples by 3He-ingrowth-method are described and the potential of the so obtained data for oceanographic purposes...

  11. Practical aspects of tritium measurement in ground and surface waters

    Energy Technology Data Exchange (ETDEWEB)

    Nitzsche, O. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Angewandte Physik; Hebert, D. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Angewandte Physik

    1997-03-01

    Tritium measurements are a powerful tool in hydrological and hydrogeological investigations for detecting mean residence times of several water reservoirs. Due to the low tritium activities in precipitation, ground and surface waters a low level measurement is necessary. Therefore often the liquid scintillation counting after an electrolytic enrichment of water is used. In this paper some practical aspects and problems of measurement are discussed and the problem of contamination in low level laboratories is shown. (orig.)

  12. Description of tritium release from lithium titanate at constant temperature

    Energy Technology Data Exchange (ETDEWEB)

    Pena, L.; Lagos, S.; Jimenez, J.; Saravia, E. [Comision Chilena de Energia Nuclear, Santiago (Chile)

    1998-03-01

    Lithium Titanate Ceramics have been prepared by the solid-state route, pebbles and pellets were fabricated by extrusion and their microstructure was characterized in our laboratories. The ceramic material was irradiated in the La Reina Reactor, RECH-1. A study of post-irradiation annealing test, was performed measuring Tritium release from the Lithium Titanate at constant temperature. The Bertone`s method modified by R. Verrall is used to determine the parameters of Tritium release from Lithium Titanate. (author)

  13. Confinement and heating of a deuterium-tritium plasma

    Energy Technology Data Exchange (ETDEWEB)

    Hawryluk, R.J.; Adler, H.; Alling, P.; Ancher, C.; Anderson, H.; Anderson, J.L.; Ashcroft, D.; Barnes, C.W.; Barnes, G.; Batha, S.; Bell, M.G.; Bell, R.; Bitter, M.; Blanchard, W.; Bretz, N.L.; Budny, R.; Bush, C.E.; Camp, R.; Caorlin, M.; Cauffman, S.; Chang, Z.; Cheng, C.Z.; Collins, J.; Coward, G.; Darrow, D.S.; DeLooper, J.; Duong, H.; Dudek, L.; Durst, R.; Efthimion, P.C.; Ernst, D.; Fisher, R.; Fonck, R.J.; Fredrickson, E.; Fromm, N.; Fu, G.Y.; Furth, H.P.; Gentile, C.; Gorelenkov, N.; Grek, B.; Grisham, L.R.; Hammett, G.; Hanson, G.R.; Heidbrink, W.; Herrmann, H.W.; Hill, K.W.; Hosea, J.; Hsuan, H.; Janos, A.; Jassby, D.L.; Jobes, F.C.; Johnson, D.W.; Johnson, L.C.; Kamperschroer, J.; Kugel, H.; Lam, N.T.; LaMarche, P.H.; Loughlin, M.J.; LeBlanc, B.; Leonard, M.; Levinton, F.M.; Machuzak, J.; Mansfield, D.K.; Martin, A.; Mazzucato, E.; Majeski, R.; Marmar, E.; McChesney, J.; McCormack, B.; McCune, D.C.; McGuire, K.M.; McKee, G.; Meade, D.M.; Medley, S.S.; Mikkelsen, D.R.; Muelle

    1994-05-30

    The Tomamak Fusion Test reactor has performed initial high-power experiments with the plasma fueled with nominally equal densities of deuterium and tritium. Compared to pure deuterium plasmas, the energy stored in the electron and ions increased by [similar to]20%. These increases indicate improvements in confinement associated with the use of tritium and possibly heating of electrons by [alpha] particles created by the D-T fusion reactions.

  14. Demonstration of an Emergency Containment System. [Tritium containment

    Energy Technology Data Exchange (ETDEWEB)

    Flanagan, T.M.; Rogers, M.L.; Wilkes, W.R.

    1978-01-01

    A system called an Emergency Containment System (ECS) to be used for tertiary containment of tritium was reported at the 13th Air Cleaning Conference. This system was part of the Tritium Effluent Control Laboratory then under construction at Mound Facility. A series of experiments has recently been conducted to evaluate the performance of an ECS in capturing tritium accidentally released into an operating laboratory. The ECS is an automatically actuated laboratory air detritiation system utilizing a catalytic oxidation reactor and presaturated oxide adsorption/exchange columns. In the event of an accidental release of tritium into the laboratory, the ECS is automatically activated, and quick-acting pneumatic dampers divert the laboratory air supply and exhaust through the ECS until room concentrations are returned to safe operating levels. The results of the experiments have shown that a tertiary containment of tritium is feasible. In the event of a catastrophic accident, the ECS is capable of preventing the release of a large quantity of tritium to the environment.

  15. Relation between the tritium in continuous atmospheric release and the tritium contents of fruits and tubers.

    Science.gov (United States)

    Korolevych, V Y; Kim, S B

    2013-04-01

    Concentrations of organically bound tritium (OBT) and tissue-free water tritium (TFWT, also referred to as HTO) in fruits and tubers were measured at a garden plot in the vicinity of the source of chronic airborne tritium emissions during the 2008, 2010, and 2011 growing seasons. A continuous record of HTO concentration in the air moisture was reconstructed from the continuous record of Ar-41 ambient gamma radiation, as well as from frequent measurements of air HTO by active samplers at the garden plot and Ar-41 and air HTO monitoring data from the same sector. Performed measurements were used for testing the modified Specific Activity (SA) model based on the assumption that the average air HTO during the pod-filling period provides an appropriate basis for estimating the levels of OBT present in pods, fruits and tubers. It is established that the relationship between the OBT of fruits and tubers and the average air HTO from a 15-20 day wide window centred at the peak of the pod-filling period is consistent throughout the three analysed years, and could be expressed by the fruit or tuber's OBT to air-HTO ratio of 0.93 ± 0.21. For all three years, the concentration of HTO in fruits and tubers was found to be related to levels of HTO in the air, as averaged within a 3-day pre-harvest window. The variability in the ratio of plant HTO to air HTO appears to be three times greater than that for the OBT of the fruits and tubers. It is concluded that the OBT of fruits and tubers adequately follows an empirical relationship based on the average level of air HTO from the pod-filling window, and therefore is clearly in line with the modified SA approach. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  16. Lay-out and materials for in pile tritium transport testing of breeder-inside-tube pin assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Alvani, C. [ENEA, CR Casaccia, Rome (Italy); Avon, J. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Grenoble (France); Casadio, S. [ENEA, CR Casaccia, Rome (Italy); Mancini, M.R. [ENEA, CR Casaccia, Rome (Italy); Nannetti, C.A. [ENEA, CR Casaccia, Rome (Italy); Pruzzo, G. [ENEA, CR Casaccia, Rome (Italy)]|[FN, Bosco Marengo-Alessandria (Italy); Ravel, S. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Grenoble (France); Roux, N. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN Saclay, Gif-sur-Yvette (France); Terlain, A. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Fontenay-aux-Roses (France); Terrosi [ENEA, CR Casaccia, Rome (Italy)]|[FN, Bosco Marengo-Alessandria (Italy); Zaghini, P. [ENEA, CR Casaccia, Rome (Italy)]|[FIN-Ceramica, Faenza, Ravenna (Italy); Zanardi, P. [ENEA, CR Casaccia, Rome (Italy)]|[ENEA, CR Clementel-Bologna (Italy); Zanotti, M. [ENEA, CR Casaccia, Rome (Italy)]|[ENEA, CR Clementel-Bologna (Italy)

    1995-12-31

    An irradiation experiment (90 FPD in SILOE reactor) has been designed in order to evaluate the in-situ effect of red-ox power of sweeping gas (helium with 100 vpm of H{sub 2}/H{sub 2}O with relative concentrations varying from pure H{sub 2} to pure H{sub 2}O) on (a) Tritium removal from LiAlO{sub 2} and Li{sub 2}ZrO{sub 3}; (b) Tritium permeation through AISI-316L SS tubes with bare and coated surfaces. The conditions and materials explored were selected in order to test possible improvements with respect to critical issues for the `Breeder Inside Tube` (BIT) blanket concept development. (orig.).

  17. Problems bound to the tritium in materials for the nuclear - some illustrations; Problematiques liees au tritium dans les materiaux dans le domaine nucleaire - quelques illustrations

    Energy Technology Data Exchange (ETDEWEB)

    Gastaldi, O. [CEA Cadarache (DTN/STPA/LPC), 13 - Saint-Paul-lez-Durance (France)

    2007-07-01

    The tritium control takes more and more importance in the nuclear industry because of the release more and more limited, in the environment. After a presentation on the tritium sources in the environment, the author presents the different ways of its production. Then for each reactor channel, the main problems are presented (fission and fusion). The last part deals with the behavior of the tritium in materials: the tritium inventory control in a fusion system, the tritium management after the reactor exploitation. (A.L.B.)

  18. Health risk assessment of potable water containing small amount of tritium oxide

    Science.gov (United States)

    Momot, O. A.; Synzynys, B. I.; Oudalova, A. A.

    2017-01-01

    The problem of groundwater pollution with tritium in a vicinity of radiation-dangerous facilities in Obninsk is considered. The information on the specific activity of tritium in Obninsk water sources is provided. The formula for the calculation of the β-radiation absorbed dose from tritium ingestion is proposed, reflecting the biological behavior of tritium in a human body. To establish the extent of tritium effects on human, the health risk is assessed. It is shown that if the specific activity of tritium in drinking water amounts to 10 Bq/l, the risk of stochastic effects of radiation will not exceed the limit of the individual lifetime risk.

  19. Reducing the tritium inventory in waste produced by fusion devices

    Energy Technology Data Exchange (ETDEWEB)

    Pamela, J., E-mail: jerome.pamela@cea.fr [CEA, Agence ITER-France, F-13108 Saint-Paul-lez-Durance (France); Decanis, C. [CEA, DEN, Centre de Cadarache, F-13108 Saint-Paul-lez-Durance (France); Canas, D. [CEA, DEN/DADN, Centre de Saclay, F-91191 Gif-sur-Yvette cedex (France); Liger, K.; Gaune, F. [CEA, DEN, Centre de Cadarache, F-13108 Saint-Paul-lez-Durance (France)

    2015-04-15

    Highlights: • Fusion devices including ITER will generate tritiated waste, some of which will need to be detritiated before disposal. • Interim storage is the reference solution offering an answer for all types of tritiated radwaste. • Incineration is very attractive for VLLW and possibly SL-LILW soft housekeeping waste, since it offers higher tritium and waste volume reduction than the alternative thermal treatment technique. • For metallic waste, further R&D efforts should be made to optimize tritium release management and minimize the need for interim storage. - Abstract: The specific issues raised by tritiated waste resulting from fusion machines are described. Of the several categories of tritium contaminated waste produced during the entire lifespan of a fusion facility, i.e. operating phase and dismantling phase, only two categories are considered here: metal components and solid combustible waste, especially soft housekeeping materials. Some of these are expected to contain a high level of tritium, and may therefore need to be processed using a detritiation technique before disposal or interim storage. The reference solution for tritiated waste management in France is a 50-year temporary storage for tritium decay, with options for reducing the tritium content as alternatives or complement. An overview of the strategic issues related to tritium reduction techniques is proposed for each radiological category of waste for both metallic and soft housekeeping waste. For this latter category, several options of detritiation techniques by thermal treatment like heating up or incineration are described. A comparison has been made between these various technical options based on several criteria: environment, safety, technical feasibility and costs. For soft housekeeping waste, incineration is very attractive for VLLW and possibly SL-LILW. For metallic waste, further R&D efforts should be conducted.

  20. A system dynamics model for tritium cycle of pulsed fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Zuolong; Nie, Baojie [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Chen, Dehong, E-mail: dehong.chen@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

    2017-05-15

    As great challenges and uncertainty exist in achieving steady plasma burning, pulsed plasma burning may be a potential scenario for fusion engineering test reactor, even for fusion DEMOnstration reactor. In order to analyze dynamic tritium inventory and tritium self-sufficiency for pulsed fusion systems, a system dynamics model of tritium cycle was developed on the basis of earlier version of Tritium Analysis program for fusion System (TAS). The model was verified with TRIMO, which was developed by KIT in Germany. Tritium self-sufficiency and dynamic tritium inventory assessment were performed for a typical fusion engineering test reactor. The verification results show that the system dynamics model can be used for tritium cycle analysis of pulsed fusion reactor with sufficient reliability. The assessment results of tritium self-sufficiency indicate that the fusion reactor might only need several hundred gram tritium to startup if achieved high efficient tritium handling ability (Referred ITER: 1 h). And the initial tritium startup inventory in pulsed fusion reactor is determined by the combined influence of pulse length, burn availability, and tritium recycle time. Meanwhile, tritium self-sufficiency can be achieved under the defined condition.

  1. Development of a Tritium Extruder for ITER Pellet Injection

    Energy Technology Data Exchange (ETDEWEB)

    M.J. Gouge; P.W. Fisher

    1998-09-01

    As part of the International Thermonuclear Experimental Reactor (ITER) plasma fueling development program, Oak Ridge National Laboratory (ORNL) has fabricated a pellet injection system to test the mechanical and thermal properties of extruded tritium. Hydrogenic pellets will be used in ITER to sustain the fusion power in the plasma core and may be crucial in reducing first-wall tritium inventories by a process of "isotopic fueling" in which tritium-rich pellets fuel the burning plasma core and deuterium gas fuels the edge. This repeating single-stage pneumatic pellet injector, called the Tritium-Proof-of-Principle Phase II (TPOP-II) Pellet Injector, has a piston-driven mechanical extruder and is designed to extrude and accelerate hydrogenic pellets sized for the ITER device. The TPOP-II program has the following development goals: evaluate the feasibility of extruding tritium and deuterium-tritium (D-T) mixtures for use in future pellet injection systems; determine the mechanical and thermal properties of tritium and D-T extrusions; integrate, test, and evaluate the extruder in a repeating, single-stage light gas gun that is sized for the ITER application (pellet diameter -7 to 8 mm); evaluate options for recycling propellant and extruder exhaust gas; and evaluate operability and reliability of ITER prototypical fueling systems in an environment of significant tritium inventory that requires secondary and room containment systems. In tests with deuterium feed at ORNL, up to 13 pellets per extrusion have been extruded at rates up to 1 Hz and accelerated to speeds of 1.0 to 1.1 km/s, using hydrogen propellant gas at a supply pressure of 65 bar. Initially, deuterium pellets 7.5 mm in diameter and 11 mm in length were produced-the largest cryogenic pellets produced by the fusion program to date. These pellets represent about a 10% density perturbation to ITER. Subsequently, the extruder nozzle was modified to produce pellets that are almost 7.5-mm right circular

  2. Tritium in the Savannah River Site environment. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, C.E. Jr.; Bauer, L.R.; Hayes, D.W.; Marter, W.L.; Zeigler, C.C.; Stephenson, D.E.; Hoel, D.D.; Hamby, D.M.

    1991-05-01

    Tritium is released to the environment from many of the operations at the Savannah River Site. The releases from each facility to the atmosphere and to the soil and streams, both from normal operations and inadvertent releases, over the period of operation from the early 1950s through 1988 are presented. The fate of the tritium released is evaluated through environmental monitoring, special studies, and modeling. It is concluded that approximately 91% of the tritium remaining after decay is now in the oceans. A dose and risk assessment to the population around the site is presented. It is concluded that about 0.6 fatal cancers may be associated with the tritium released during all the years of operation to the population of about 625,000. This same population (based on the overall US cancer statistics) is expected to experience about 105,000 cancer fatalities from all types of cancer. Therefore, it is considered unlikely that a relationship between any of the cancer deaths occurring in this population and releases of tritium from the SRS will be found.

  3. Limitation of tritium outgassing from tritiated solid waste drums

    Energy Technology Data Exchange (ETDEWEB)

    Liger, K.; Trabuc, P.; Lefebvre, X.; Troulay, M.; Perrais, C. [CEA, Centre de Cadarache, DEN/DTN/STPA/LIPC, Saint-Paul-lez-Durance (France)

    2015-03-15

    In the framework of the development of fusion thermonuclear reactors, tritiated solid waste is foreseen and will have to be managed. The management of tritiated waste implies limitations in terms of activity and tritium degassing. The degassing tritium can be under the form of tritiated hydrogen, tritiated water and, in some specific cases, negligible amount of tritiated volatile organic compound. Hence, considering the major forms of degassing tritium, CEA has developed a mixed-compound dedicated to tritium trapping in drums. Based on several experiments, the foreseen mixed compound is composed of MnO{sub 2}, Ag{sub 2}O, Pt and molecular sieve, the three first species having the ability to convert tritiated hydrogen into tritiated water and the last one acting as a trap for tritiated water. To assess the performance of the trapping mixture, experimental tests were performed at room temperature on tritiated dust composed of beryllium and carbon. It was shown that the metallic oxides mixture used for tritiated hydrogen conversion is efficient and that tritiated water adsorption was limited due to an inefficient regeneration of the molecular sieve prior to its use. Apart from this point, the tritium release from waste was reduced by a factor of 5.5, which can be improved up to 87 if the adsorption step is efficient.

  4. Operational Readiness Review: Savannah River Replacement Tritium Facility

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-01

    The Operational Readiness Review (ORR) is one of several activities to be completed prior to introducing tritium into the Replacement Tritium Facility (RTF) at the Savannah River Site (SRS). The Secretary of Energy will rely in part on the results of this ORR in deciding whether the startup criteria for RTF have been met. The RTF is a new underground facility built to safely service the remaining nuclear weapons stockpile. At RTF, tritium will be unloaded from old components, purified and enriched, and loaded into new or reclaimed reservoirs. The RTF will replace an aging facility at SRS that has processed tritium for more than 35 years. RTF has completed construction and is undergoing facility startup testing. The final stages of this testing will require the introduction of limited amounts of tritium. The US Department of Energy (DOE) ORR was conducted January 19 to February 4, 1993, in accordance with an ORR review plan which was developed considering previous readiness reviews. The plan also considered the Defense Nuclear Facilities Safety Board (DNFSB) Recommendations 90-4 and 92-6, and the judgements of experienced senior experts. The review covered three major areas: (1) Plant and Equipment Readiness, (2) Personnel Readiness, and (3) Management Systems. The ORR Team was comprised of approximately 30 members consisting of a Team Leader, Senior Safety Experts, and Technical Experts. The ORR objectives and criteria were based on DOE Orders, industry standards, Institute of Nuclear Power Operations guidelines, recommendations of external oversight groups, and experience of the team members.

  5. Improving Tritium Exposure Reconstructions Using Accelerator Mass Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Love, A; Hunt, J; Knezovich, J

    2003-06-01

    Exposure reconstructions for radionuclides are inherently difficult. As a result, most reconstructions are based primarily on mathematical models of environmental fate and transport. These models can have large uncertainties, as important site-specific information is unknown, missing, or crudely estimated. Alternatively, surrogate environmental measurements of exposure can be used for site-specific reconstructions. In cases where environmental transport processes are complex, well-chosen environmental surrogates can have smaller exposure uncertainty than mathematical models. Because existing methodologies have significant limitations, the development or improvement of methodologies for reconstructing exposure from environmental measurements would provide important additional tools in assessing the health effects of chronic exposure. As an example, the direct measurement of tritium atoms by accelerator mass spectrometry (AMS) enables rapid low-activity tritium measurements from milligram-sized samples, which permit greater ease of sample collection, faster throughput, and increased spatial and/or temporal resolution. Tritium AMS was previously demonstrated for a tree growing on known levels of tritiated water and for trees exposed to atmospheric releases of tritiated water vapor. In these analyses, tritium levels were measured from milligram-sized samples with sample preparation times of a few days. Hundreds of samples were analyzed within a few months of sample collection and resulted in the reconstruction of spatial and temporal exposure from tritium releases.

  6. The human body retention time of environmental organically bound tritium

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, John; Bailey, Trevor [Centre for Environment, Fisheries and Aquaculture Science, Pakefield Road, Lowestoft, Suffolk NR33 0HT (United Kingdom); Reese, Allan [Centre for Environment, Fisheries and Aquaculture Science, The Nothe, Barrack Road, Weymouth, Dorset DT4 8UB (United Kingdom)], E-mail: john.hunt@cefas.co.uk

    2009-03-15

    Tritium in the UK environment causes low radiation doses to the public, but uncertainty exists in the dose coefficient for the organically bound component of tritium (OBT). This can affect the assessment of effective doses to representative persons. Contributing to that uncertainty is poor knowledge of the body retention time of OBT and how this varies for different OBT compounds in food. This study was undertaken to measure the retention time of tritium by volunteers after eating sole from Cardiff Bay, which may contain OBT from discharges from the GE Healthcare Ltd plant. Five volunteers provided samples of excreta over periods up to 150 days after intake. The results, which are presented in raw form to allow independent analysis, suggest retention of total tritium with body half-times ranging from 4 to 11 days, with no evidence (subject to experimental noise) of a significant contribution due to retention with a longer half-time. This range covers the half-time of 10 days used by the ICRP for tritiated water. The short timescale could be due to rapid hydrolysis in body tissues of the particular form of OBT used in this study. Implications for the dose coefficient for OBT are that the use of the ICRP value of 4.2 x 10{sup -11} Sv Bq{sup -1} may be cautious in this specific situation. These observations on dose coefficients are separate from any implications of recent discussion on whether the tritium radiation weighting factor should be increased from 1 to 2.

  7. Tritium concentration analysis in atmospheric precipitation in Serbia.

    Science.gov (United States)

    Janković, Marija M; Janković, Bojan Ž; Todorović, Dragana J; Ignjatović, Ljubiša M

    2012-01-01

    Tritium activity concentration were monitored in monthly precipitation at five locations in Serbia (Meteorological Station of Belgrade at Zeleno Brdo, Vinča Institute of Nuclear Sciences, Smederevska Palanka, Kraljevo and Niš) over 2005, using electrolytic enrichment and liquid scintillation counting. The obtained concentrations ranged from 3.36 to 127.02 TU. The activity values obtained in samples collected at Zeleno Brdo were lower or close to the minimum detectable activity (MDA), which has a value of 3.36 TU. Significantly higher tritium levels were obtained in samples collected in Vinča Institute of Nuclear Sciences compared with samples from the other investigated locations. Amount of precipitation were also recorded. A good linear correlation (r = 0.75) for Zeleno Brdo and VINS between their tritium activity was obtained. It was found that the value of the symmetrical index n (which indicates the magnitude of tritium content changes with time (months) through its second derivative) is the highest for Vinča Institute of Nuclear Sciences compared to other locations, which is in accordance with the fact that the highest concentrations of tritium were obtained in the samples from the cited place.

  8. Dynamic model for tritium transfer in an aquatic food chain.

    Science.gov (United States)

    Melintescu, A; Galeriu, D

    2011-08-01

    Tritium ((3)H) is released from some nuclear facilities in relatively large quantities. It is a ubiquitous isotope because it enters straight into organisms, behaving essentially identically to its stable analogue (hydrogen). Tritium is a key radionuclide in the aquatic environment, in some cases, contributing significantly to the doses received by aquatic, non-human biota and by humans. The updated model presented here is based on more standardized, comprehensive assessments than previously used for the aquatic food chain, including the benthic flora and fauna, with an explicit application to the Danube ecosystem, as well as an extension to the special case of dissolved organic tritium (DOT). The model predicts the organically bound tritium (OBT) in the primary producers (the autotrophs, such as phytoplankton and algae) and in the consumers (the heterotrophs) using their bioenergetics, which involves the investigation of energy expenditure, losses, gains and efficiencies of transformations in the body. The model described in the present study intends to be more specific than a screening-level model, by including a metabolic approach and a description of the direct uptake of DOT in marine phytoplankton and invertebrates. For a better control of tritium transfer into the environment, not only tritiated water must be monitored, but also the other chemical forms and most importantly OBT, in the food chain.

  9. MSSV Modeling for Wolsong-1 Safety Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Bok Ja; Choi, Chul Jin; Kim, Seoung Rae [KEPCO EandC, Daejeon (Korea, Republic of)

    2010-10-15

    The main steam safety valves (MSSVs) are installed on the main steam line to prevent the overpressurization of the system. MSSVs are held in closed position by spring force and the valves pop open by internal force when the main steam pressure increases to open set pressure. If the overpressure condition is relieved, the valves begin to close. For the safety analysis of anticipated accident condition, the safety systems are modeled conservatively to simulate the accident condition more severe. MSSVs are also modeled conservatively for the analysis of over-pressurization accidents. In this paper, the pressure transient is analyzed at over-pressurization condition to evaluate the conservatism for MSSV models

  10. Characteristics of microstructure and tritium release properties of different kinds of beryllium pebbles for application in tritium breeding modules

    Energy Technology Data Exchange (ETDEWEB)

    Kurinskiy, P., E-mail: petr.kurinskiy@kit.edu [Karlsruhe Institute of Technology, Institute for Applied Materials – Applied Materials Physics (IAM-AWP), P.O. Box 3640, Karlsruhe 76021 (Germany); Vladimirov, P.; Moeslang, A. [Karlsruhe Institute of Technology, Institute for Applied Materials – Applied Materials Physics (IAM-AWP), P.O. Box 3640, Karlsruhe 76021 (Germany); Rolli, R. [Karlsruhe Institute of Technology, Institute for Applied Materials – Materials and Biomechanics (IAM-WBM), P.O. Box 3640, Karlsruhe 76021 (Germany); Zmitko, M. [The European Joint Undertaking for ITER and the Development of Fusion Energy, c/Josep Pla, no. 2, Torres Diagonal Litoral, Edificio B3, Barcelona 08019 (Spain)

    2014-10-15

    Highlights: • Tritium release properties and characteristics of microstructure of beryllium pebbles having different sizes of grains were studied. • Fine-grained beryllium pebbles showed the best ability to release tritium compared to pebbles from another charges. • Be pebbles with the grain sizes exceeding 100 μm contain a great number of small pores and inclusions presumably referring to the history of material fabrication. • The sizes of grains are one of a key characteristic of microstructure which influences the parameters of tritium release. - Abstract: Beryllium pebbles with diameters of 1 mm are considered to be perspective material for the use as neutron multiplier in tritium breeding modules of fusion reactors. Up to now, the design of helium-cooled breeding blanket in ITER project foresees the use of 1 mm beryllium pebbles fabricated by NGK Insulators Ltd., Japan. It is notable that beryllium pebbles from Russian Federation and USA are also available and the possibility of their large-scale fabrication is under study. Presented work is dedicated to a study of characteristics of microstructure and parameters of tritium release of beryllium pebbles produced by Bochvar Institute, Russian Federation, and Materion Corporation, USA.

  11. Tritium as an indicator of venues for nuclear tests.

    Science.gov (United States)

    Lyakhova, O N; Lukashenko, S N; Mulgin, S I; Zhdanov, S V

    2013-10-01

    Currently, due to the Treaty on the Non-proliferation of Nuclear Weapons there is a highly topical issue of an accurate verification of nuclear explosion venues. This paper proposes to consider new method for verification by using tritium as an indicator. Detailed studies of the tritium content in the air were carried in the locations of underground nuclear tests - "Balapan" and "Degelen" testing sites located in Semipalatinsk Test Site. The paper presents data on the levels and distribution of tritium in the air where tunnels and boreholes are located - explosion epicentres, wellheads and tunnel portals, as well as in estuarine areas of the venues for the underground nuclear explosions (UNE). Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Tritium Permeability of Incoloy 800H and Inconel 617

    Energy Technology Data Exchange (ETDEWEB)

    Philip Winston; Pattrick Calderoni; Paul Humrickhouse

    2012-07-01

    Design of the Next Generation Nuclear Plant (NGNP) reactor and its high-temperature components requires information regarding the permeation of fission generated tritium and hydrogen product through candidate heat exchanger alloys. Release of fission-generated tritium to the environment and the potential contamination of the helium coolant by permeation of product hydrogen into the coolant system represent safety basis and product contamination issues. Of the three potential candidates for high-temperature components of the NGNP reactor design, only permeability for Incoloy 800H has been well documented. Hydrogen permeability data have been published for Inconel 617, but only in two literature reports and for partial pressures of hydrogen greater than one atmosphere, far higher than anticipated in the NGNP reactor. To support engineering design of the NGNP reactor components, the tritium permeability of Inconel 617 and Incoloy 800H was determined using a measurement system designed and fabricated at Idaho National Laboratory. The tritium permeability of Incoloy 800H and Inconel 617, was measured in the temperature range 650 to 950°C and at primary concentrations of 1.5 to 6 parts per million volume tritium in helium. (partial pressures of 10-6 atm)—three orders of magnitude lower partial pressures than used in the hydrogen permeation testing. The measured tritium permeability of Incoloy 800H and Inconel 617 deviated substantially from the values measured for hydrogen. This may be due to instrument offset, system absorption, presence of competing quantities of hydrogen, surface oxides, or other phenomena. Due to the challenge of determining the chemical composition of a mixture with such a low hydrogen isotope concentration, no categorical explanation of this offset has been developed.

  13. Tritium Permeability of Incoloy 800H and Inconel 617

    Energy Technology Data Exchange (ETDEWEB)

    Philip Winston; Pattrick Calderoni; Paul Humrickhouse

    2011-09-01

    Design of the Next Generation Nuclear Plant (NGNP) reactor and its high-temperature components requires information regarding the permeation of fission generated tritium and hydrogen product through candidate heat exchanger alloys. Release of fission-generated tritium to the environment and the potential contamination of the helium coolant by permeation of product hydrogen into the coolant system represent safety basis and product contamination issues. Of the three potential candidates for high-temperature components of the NGNP reactor design, only permeability for Incoloy 800H has been well documented. Hydrogen permeability data have been published for Inconel 617, but only in two literature reports and for partial pressures of hydrogen greater than one atmosphere, far higher than anticipated in the NGNP reactor. To support engineering design of the NGNP reactor components, the tritium permeability of Inconel 617 and Incoloy 800H was determined using a measurement system designed and fabricated at Idaho National Laboratory. The tritium permeability of Incoloy 800H and Inconel 617, was measured in the temperature range 650 to 950 C and at primary concentrations of 1.5 to 6 parts per million volume tritium in helium. (partial pressures of 10-6 atm) - three orders of magnitude lower partial pressures than used in the hydrogen permeation testing. The measured tritium permeability of Incoloy 800H and Inconel 617 deviated substantially from the values measured for hydrogen. This may be due to instrument offset, system absorption, presence of competing quantities of hydrogen, surface oxides, or other phenomena. Due to the challenge of determining the chemical composition of a mixture with such a low hydrogen isotope concentration, no categorical explanation of this offset has been developed.

  14. Tritium and helium retention and release from irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Anderl, R.A.; Longhurst, G.R.; Oates, M.A.; Pawelko, R.J. [Idaho National Engineering and Environmental Lab., Idaho Falls, ID (United States)

    1998-01-01

    This paper reports the results of an experimental effort to anneal irradiated beryllium specimens and characterize them for steam-chemical reactivity experiments. Fully-dense, consolidated powder metallurgy Be cylinders, irradiated in the EBR-II to a fast neutron (>0.1 MeV) fluence of {approx}6 x 10{sup 22} n/cm{sup 2}, were annealed at temperatures from 450degC to 1200degC. The releases of tritium and helium were measured during the heat-up phase and during the high-temperature anneals. These experiments revealed that, at 600degC and below, there was insignificant gas release. Tritium release at 700degC exhibited a delayed increase in the release rate, while the specimen was at 700degC. For anneal temperatures of 800degC and higher, tritium and helium release was concurrent and the release behavior was characterized by gas-burst peaks. Essentially all of the tritium and helium was released at temperatures of 1000degC and higher, whereas about 1/10 of the tritium was released during the anneals at 700degC and 800degC. Measurements were made to determine the bulk density, porosity and specific surface area for each specimen before and after annealing. These measurements indicated that annealing caused the irradiated Be to swell, by as much as 14% at 700degC and 56% at 1200degC. Kr gas adsorption measurements for samples annealed at 1000degC and 1200degC determined specific surface areas between 0.04 m{sup 2}/g and 0.1 m{sup 2}/g for these annealed specimens. The tritium and helium gas release measurements and the specific surface area measurements indicated that annealing of irradiated Be caused a porosity network to evolve and become surface-connected to relieve internal gas pressure. (author)

  15. 78 FR 41720 - CampCo Petition to Allow Commercial Distribution of Tritium Markers

    Science.gov (United States)

    2013-07-11

    ...; ] NUCLEAR REGULATORY COMMISSION 10 CFR Part 32 CampCo Petition to Allow Commercial Distribution of Tritium... commercial distribution of tritium markers for use under exemption from licensing requirements. DATES: Submit... from licensing requirements to include illumination markers containing tritium. On July 5, 2012 (ADAMS...

  16. 10 CFR 30.19 - Self-luminous products containing tritium, krypton-85, or promethium-147.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Self-luminous products containing tritium, krypton-85, or... DOMESTIC LICENSING OF BYPRODUCT MATERIAL Exemptions § 30.19 Self-luminous products containing tritium... transfer for sale or distribution self-luminous products containing tritium, krypton-85, or promethium-147...

  17. 10 CFR 150.19 - Submission to Commission of tritium reports.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Submission to Commission of tritium reports. 150.19... Agreement States § 150.19 Submission to Commission of tritium reports. (a)-(b) (c) Except as specified in... possess tritium shall report promptly to the appropriate NRC Regional Office as shown in appendix D of...

  18. Exposure Control for Operations and Maintenance at the Accelerator Production of Tritium

    Energy Technology Data Exchange (ETDEWEB)

    McGuire, D.H. [Westinghouse Savannah River Company, AIKEN, SC (United States)

    1998-09-01

    The APT will be designed and operated to support continuous tritium production. Tritium is an essential ingredient in U.S. nuclear weapons. The APT will be designed and staffed to support continuous production of tritium by trained, qualified, and certified personnel.

  19. Novel Methods of Tritium Sequestration: High Temperature Gettering and Separation Membrane Materials Discovery for Nuclear Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Franglin [Univ. of South Carolina, Columbia, SC (United States); Sholl, David [Georgia Inst. of Technology, Atlanta, GA (United States); Brinkman, Kyle [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Lyer, Ratnasabapathy [Claflin Univ., Orangeburg, SC (United States); Iyer, Ratnasabapathy [Claflin Univ., Orangeburg, SC (United States); Reifsnider, Kenneth [Univ. of South Carolina, Columbia, SC (United States)

    2015-01-22

    This project is aimed at addressing critical issues related to tritium sequestration in next generation nuclear energy systems. A technical hurdle to the use of high temperature heat from the exhaust produced in the next generation nuclear processes in commercial applications such as nuclear hydrogen production is the trace level of tritium present in the exhaust gas streams. This presents a significant challenge since the removal of tritium from the high temperature gas stream must be accomplished at elevated temperatures in order to subsequently make use of this heat in downstream processing. One aspect of the current project is to extend the techniques and knowledge base for metal hydride materials being developed for the ''hydrogen economy'' based on low temperature absorption/desorption of hydrogen to develop materials with adequate thermal stability and an affinity for hydrogen at elevated temperatures. The second focus area of this project is to evaluate high temperature proton conducting materials as hydrogen isotope separation membranes. Both computational and experimental approaches will be applied to enhance the knowledge base of hydrogen interactions with metal and metal oxide materials. The common theme between both branches of research is the emphasis on both composition and microstructure influence on the performance of sequestration materials.

  20. Deuterium-tritium experiments on TFTR

    Energy Technology Data Exchange (ETDEWEB)

    Bretz, N.L.; Adler, H.; Alling, P.; Ancher, C.; Anderson, H.; Anderson, J.W.; Arunasalam, V.; Ascione, G.; Barnes, C.W.; Barnes, G.; Batha, S.; Bateman, G.; Beer, M.; Bell, M.G.; Bell, R.; Bitter, M.; Blanchard, W.; Brunkhorst, C.; Budny, R.; Bush, C.E.; Camp, R.; Caorlin, M.; Carnevale, H.; Cauffman, S.; Chang, Z.; Cheng, C.; Chrzanowski, J.; Collins, J.; Coward, G.; Cropper, M.; Darrow, D.S.; Daugert, R.; DeLooper, J.; Dorland, W.; Dudek, L.; Duong, H.; Durst, R.; Efthimion, P.C.; Ernst, D.; Evensen, H.; Fisch, N.; Fisher, R.; Fonck, R.J.; Fredd, E.; Fredrickson, E.; Fromm, R.; Fu, G.; Fujita, T.; Furth, H.P.; Garzotto, V.; Gentile, C.; Gilbert, J.; Giola, J.; Gorelenkov, N.; Grek, B.; Grisham, L.R.; Hammett, G.; Hanson, G.R.; Hawryluk, R.J.; Heidbrink, W.; Herrmann, H.W.; Hill, K.W.; Hosea, J.; Hsuan, H.; Hughes, M.; Hulse, R.; Janos, A.; Jassby, D.L.; Jobes, F.C.; Johnson, D.W.; Johnson, L.C.; Kalish, M.; Kamperschroer, J.; Kesner, J.; Kugel, H.; Labik, G.; Lam, N.T.; LaMarche, P.H.; Lawson, E.; LeBlanc, B.; Levine, J.; Levinton, F.M.; Loesser, D.; Long, D.; Loughlin, M.J.; Machuzak, J.; Majeski, R.; Mansfield, D.K.; Marmar, E.; Marsala, R.; Martin, A.; Martin, G.; Mauel, M.; Mazzucato, E.; McCarthy, M.P.; McChesney, J.; McCormack, B.; McCune, D.C.; McGuire, K.M.; McKee, G.; Meade, D.M.; Medley, S.S.; Mikkelsen, D.R.; Mirnov, S.V.; Mueller, D.; Murakami, M.; Murphy, J.A.; Nagy, A.; Navratil, G.A.; Nazikian, R.; Newman, R.; Norris, M.; OConnor, T.; Oldaker, M.; Ongena, J.; Osakabe, M.; Owens, D.K.; Park, H.; Park, W.; Parks, P.; Paul, S.F.; Pearson, G.; Perry, E.; Persing, R.; Petrov, M.; Phillips, C.K.; Phillips, M.; Pitcher, S.; Pysher, R.; Qualls, A.L.; Raftapoulos, S.; Ramakrishnan, S.; Ramsey, A.; Rasmunsen, D.A.; Redi, M.H.; Renda, G.; Rewoldt, G.; Roberts, D.; Rogers, J.; Rossmassler, R.; Roquemore, A.L.; Ruskov, E.; Sabbaugh, S.A.; Sasao, M.; Schilling, G.; Schivell, J.; Schmidt, G.L.; Scillia, R.; Scott, S.D.; Semenov, I.; Senko, T.

    1995-09-01

    A peak fusion power production of 9.3{plus_minus}0.7 MW has been achieved on the Tokamak Fusion Test Reactor (TFTR) in deuterium plasmas heated by co and counter injected deuterium and tritium neutral beams with a total power of 33.7 MW. The ratio of fusion power output to heating power input is 0.27. At the time of the highest neutron flux the plasma conditions are: {ital T}{sub {ital e}}(0)=11.5 keV, {ital T}{sub {ital i}}(0)=44 keV, {ital n}{sub {ital e}}(0)=8.5{times}10{sup 19} m{sup {minus}3}, and {l_angle}{ital Z}{sub eff}{r_angle}=2.2 giving {tau}{sub {ital E}}=0.24 s. These conditions are similar to those found in the highest confinement deuterium plasmas. The measured D-T neutron yield is within 7% of computer code estimates based on profile measurements and within experimental uncertainties. These plasmas have an inferred central fusion alpha fraction of 0.2% and central fusion power density of 2 MW/m{sup 3} similar to that expected in a fusion reactor. Even though the alpha velocity exceeds the Alfven velocity throughout the time of high neutron output in most high power plasmas, MHD activity is similar to that in comparable deuterium plasmas and Alfven wave activity is low. The measured loss rate of energetic alpha particles is about 3% of the total as expected from alphas which are born on unconfined orbits. Compared to pure deuterium plasmas with similar externally applied conditions, the stored energy in electrons and ions is about 25% higher indicating improvements in confinement associated with D-T plasmas and consistent with modest electron heating expected from alpha particles. ICRF heating of D-T plasmas using up to 5.5 MW has resulted in 10 keV increases in central ion and 2.5 keV increases in central electron temperatures in relatively good agreement with code predictions. In these cases heating on the magnetic axis at 2{Omega}{sub {ital T}} gave up to 80% of the ICRF energy to ions. {copyright} {ital 1995 American Institute of Physics.}

  1. Future use of tritium in mapping pre-bomb groundwater volumes.

    Science.gov (United States)

    Eastoe, C J; Watts, C J; Ploughe, M; Wright, W E

    2012-01-01

    The tritium input to groundwater, represented as volume-weighted mean tritium concentrations in precipitation, has been close to constant in Tucson and Albuquerque since 1992, and the decrease in tritium concentrations at the tail end of the bomb tritium pulse has ceased. To determine the future usefulness of tritium measurements in southwestern North America, volume-weighted mean tritium levels in seasonal aggregate precipitation samples have been gathered from 26 sites. The averages range from 2 to 9 tritium units (TU). Tritium concentrations increase with site latitude, and possibly with distance from the coast and with site altitude, reflecting local ratios of combination of low-tritium moisture advected from the oceans with high-tritium moisture originating near the tropopause. Tritium used alone as a tool for mapping aquifer volumes containing only pre-bomb recharge to groundwater will become ambiguous when the tritium in precipitation at the end of the bomb tritium pulse decays to levels close to the analytical detection limit. At such a time, tritium in precipitation from the last one to two decades of the bomb pulse will become indistinguishable from pre-bomb recharge. The threshold of ambiguity has already arrived in coastal areas with a mean of 2 TU in precipitation and will follow in the next three decades throughout the study region. Where the mean tritium level is near 5 TU, the threshold will occur between 2025 and 2030, given a detection limit of 0.6 TU. Similar thresholds of ambiguity, with different local timing possible, apply globally. © 2011, The Author(s). Ground Water © 2011, National Ground Water Association.

  2. Cosmogenic production of tritium in dark matter detectors

    Science.gov (United States)

    Amaré, J.; Castel, J.; Cebrián, S.; Coarasa, I.; Cuesta, C.; Dafni, T.; Galán, J.; García, E.; Garza, J. G.; Iguaz, F. J.; Irastorza, I. G.; Luzón, G.; Martínez, M.; Mirallas, H.; Oliván, M. A.; Ortigoza, Y.; Ortiz de Solórzano, A.; Puimedón, J.; Ruiz-Chóliz, E.; Sarsa, M. L.; Villar, J. A.; Villar, P.

    2018-01-01

    The direct detection of dark matter particles requires ultra-low background conditions at energies below a few tens of keV. Radioactive isotopes are produced via cosmogenic activation in detectors and other materials and those isotopes constitute a background source which has to be under control. In particular, tritium is specially relevant due to its decay properties (very low endpoint energy and long half-life) when induced in the detector medium, and because it can be generated in any material as a spallation product. Quantification of cosmogenic production of tritium is not straightforward, neither experimentally nor by calculations. In this work, a method for the calculation of production rates at sea level has been developed and applied to some of the materials typically used as targets in dark matter detectors (germanium, sodium iodide, argon and neon); it is based on a selected description of tritium production cross sections over the entire energy range of cosmic nucleons. Results have been compared to available data in the literature, either based on other calculations or from measurements. The obtained tritium production rates, ranging from a few tens to a few hundreds of nuclei per kg and per day at sea level, point to a significant contribution to the background in dark matter experiments, requiring the application of specific protocols for target material purification, material storing underground and limiting the time the detector is on surface during the building process in order to minimize the exposure to the most dangerous cosmic ray components.

  3. Advancement in tritium transport simulations for solid breeding blanket system

    Energy Technology Data Exchange (ETDEWEB)

    Ying, Alice, E-mail: ying@fusion.ucla.edu [Mechanical and Aerospace Engineering Department, UCLA, Los Angeles, CA 90095 (United States); Zhang, Hongjie [Mechanical and Aerospace Engineering Department, UCLA, Los Angeles, CA 90095 (United States); Merrill, Brad J. [Idaho National Laboratory, Idaho Falls, ID 83415 (United States); Ahn, Mu-Young [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2016-11-01

    In this paper, advancement on tritium transport simulations was demonstrated for a solid breeder blanket HCCR TBS, where multi-physics and detailed engineering descriptions are considered using a commercial simulation code. The physics involved includes compressible purge gas fluid flow, heat transfer, chemical reaction, isotope swamping effect, and tritium isotopes mass transport. The strategy adopted here is to develop numerical procedures and techniques that allow critical details of material, geometric and operational heterogeneity in a most complete engineering description of the TBS being incorporated into the simulation. Our application focuses on the transient assessment in view of ITER being pulsed operations. An immediate advantage is a more realistic predictive and design analysis tool accounting pulsed operations induced temperature variations which impact helium purge gas flow as well as Q{sub 2} composition concentration time and space evolutions in the breeding regions. This affords a more accurate prediction of tritium permeation into the He coolant by accounting correct temperature and partial pressure effects and realistic diffusion paths. The analysis also shows that by introducing by-pass line to accommodate ITER pulsed operations in the TES loop allows tritium extraction design being more cost effective.

  4. An investigation of tritium transfer in reactor loops

    Science.gov (United States)

    Ilyasova, O. H.; Mosunova, N. A.

    2017-09-01

    The work is devoted to the important task of the numerical simulation and analysis of the tritium behaviour in the reactor loops. The simulation was carried out by HYDRA-IBRAE/LM code, which is being developed in Nuclear safety institute of the Russian Academy of Sciences. The code is intended for modeling of the liquid metal flow (sodium, lead and lead-bismuth) on the base of non-homogeneous and non-equilibrium two-fluid model. In order to simulate tritium transfer in the code, the special module has been developed. Module includes the models describing the main phenomena of tritium behaviour in reactor loops: transfer, permeation, leakage, etc. Because of shortage of the experimental data, a lot of analytical tests and comparative calculations were considered. Some of them are presented in this work. The comparison of estimation results and experimental and analytical data demonstrate not only qualitative but also good quantitative agreement. It is possible to confirm that HYDRA-IBRAE/LM code allows modeling tritium transfer in reactor loops.

  5. Synthesis of tritium-labelled biologically important diazines

    Energy Technology Data Exchange (ETDEWEB)

    Sidorov, Georgii V; Myasoedov, Nikolai F [Institute of Molecular Genetics, Russian Academy of Sciences, Moscow (Russian Federation)

    1999-03-31

    The methods for the introduction of tritium (by chemical synthesis and isotope exchange in both solution and solid state) into biologically active diazines, viz., nucleic acid components (heterocyclic bases, nucleosides, nucleotides), DNA synthesis terminators and cytokinins are considered. The bibliography includes 178 references.

  6. Tritium besmetting in Petten en mogelijke risico's voor de omgeving

    NARCIS (Netherlands)

    Slaper H; Twenhöfel C; van der Knaap Y; VLH; M&V

    2017-01-01

    In 2012 is bij de Hoge Flux Reactor (HFR) in Petten een lekkage ontdekt van de radioactieve stof tritium in de bodem. De beheerder, NRG, heeft inmiddels maatregelen genomen om de lekkage te stoppen. RIVM heeft onderzocht wat de gevolgen voor omwonenden kunnen zijn. Uit dit onderzoek komt dat ook bij

  7. A small and compact AMS facility for tritium depth profiling

    Indian Academy of Sciences (India)

    Forschungszentrum Rossendorf, Institute of Ion Beam Physics and Materials Research, P.O. Box 51 01 19, D-01314 Dresden, Germany; Forschungszentrum Karlsruhe, Tritium Laboratory, P.O. Box 35 40, D-76021 Karlsruhe, Germany; Department of Physics, University of Lund, Sölvegatan 14, SE-223 62 Lund, Sweden ...

  8. Time-of-flight spectroscopy of muonic tritium

    Energy Technology Data Exchange (ETDEWEB)

    Fujiwara, M.C. [University of British Columbia, Physics and Astronomy (Canada)], E-mail: fujiwara@triumf.ca; Adamczak, A. [Institute of Nuclear Physics (Poland); Bailey, J.M. [Chester Technology (United Kingdom); Beer, G.A. [University of Victoria, Physics and Astronomy (Canada); Beveridge, J.L. [TRIUMF (Canada); Faifman, M.P. [Kurchatov Institute (Russian Federation); Huber, T.M. [Gustavus Adolphus College, Physics (United States); Jacot-Guillarmod, R. [Universite de Fribourg, Physics Institute (Switzerland); Kammel, P. [University of California, Physics and LBNL (United States); Kim, S.K. [Jeonbuk National University (Korea, Republic of); Knowles, P.E. [Universite de Fribourg, Physics Institute (Switzerland); Kunselman, A.R. [University of Wyoming, Physics (United States); Maier, M. [University of Victoria, Physics and Astronomy (Canada); Markushin, V.E. [PSI (Switzerland); Marshall, G.M. [TRIUMF (Canada); Martoff, C.J. [Temple University, Physics (United States); Mason, G.R. [University of Victoria, Physics and Astronomy (Canada); Mulhauser, F. [Universite de Fribourg, Physics Institute (Switzerland); Olin, A. [TRIUMF (Canada); Petitjean, C. [PSI (Switzerland)] (and others)

    1999-06-15

    Emission of muonic tritium from a solid hydrogen layer has been studied via imaging of the muon-decay electrons and the time-of-flight distributions have been compared with detailed Monte Carlo calculations. Results are consistent at the 10% level with the theoretical prediction of a Ramsauer-Townsend minimum cross-section energy.

  9. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    Energy Technology Data Exchange (ETDEWEB)

    Mertz, G.

    1999-12-16

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

  10. Enhanced incorporation of nonhydrolyzable tritium in GnRH and TRF by catalytic exchange labeling

    Energy Technology Data Exchange (ETDEWEB)

    Oehlke, J.; Bienert, M.; Niedrich, H.; Mittag, E.; Toth, G.

    1987-12-01

    Gonadotropin releasing hormone (GnRH), D-Phe/sub 6/-GnRH and thyro-tropin releasing factor (TRF) were tritiated by direct catalytic exchange using RhA1/sub 2/O/sub 3/ + HT under conditions which lead in model deuterations of N..cap alpha..-acetylhistidine amide to a high incorporation of deuterium into position 5 of the histidine ring. Specific activities up to a range of 400 GBqmmol in form of nonhydrolyzable tritium are attainable after removal of the label incorporated into position 2 of the histidine ring. A crucial reason for diminished specific activities was found to be a catalyst mediated hydrogen transfer between the peptides and traces of water, contained in the reaction mixture, competing with the tritiation.

  11. CO2 laser tritium isotope separation: Collisional effects in multiphoton dissociation of trifluoromethane

    Science.gov (United States)

    Takeuchi, Kazuo; Inoue, Ichiro; Nakane, Ryohei; Makide, Yoshihiro; Kato, Shuji; Tominaga, Takeshi

    1982-01-01

    Multiphoton dissociation of ppm level CTF3 in CHF3 is reported. The effect of buffer gas pressure on the specific dissociation rates and the isotopic selectivity is investigated. Pulse energy dependence of the dissociation rates is converted to the intrinsic relation between the fractional conversion per pulse and the fluence by means of the new deconvolution technique. By addition of 100 Torr argon, the critical fluence of CTF3 was decreased from 136 to 34 J/cm2, while the intrinsic selectivity was increased from 34 to 580. In the absence of buffer gas argon, the fractional conversion per pulse exhibits two different pressure dependences. Unlike in the case below 15 Torr, the system shows strong pressure dependence and loss of the isotopic selectivity above 15 Torr. Possible application to the tritium removal process is also discussed.

  12. Study about sorption of protium and mixture protium–tritium on sponge titanium

    Energy Technology Data Exchange (ETDEWEB)

    Vasut, Felicia, E-mail: feliciavasut@yahoo.com; Stefanescu, Ioan; Bornea, Anisia Mihaela; Zamfirache, Marius; Sofalca, Nicolae; David, Claudia

    2013-10-15

    The Nuclear Power Plant Cernavoda is equipped with a CANDU reactor and is one of the most powerful tritium sources from Europe. The reactor is moderated and cooled with heavy water that is continuous enriched with tritium. The presence of the tritium decreases the capacity of the heavy water to moderate the nuclear reactions. For this reason, I.C.I.T. Ramnicu Valcea developed a detritiation technology based on catalytic isotopic exchange and cryogenic distillation. At the end of the detritiation process, heavy water is produced with low concentration of tritium (that could be introduced back for the moderation process) and tritium (that have to be stored into a stable form). Tritium is a radioactive material and one of the basic conditions for the operation of the nuclear installations is the security for the operating personnel and for the environment [1]. At I.C.I.T. Ramnicu Valcea were tested materials with high capacity for storage of tritium, like titanium sponge and powder. The first experimental study was made using protium because it was assumed that tritium behaves similar with protium. In addition, it was made experiments of sorption on sponge titanium using a mixture protium–tritium. The result was similar but not identical, titanium sponge absorbing better protium than mixture protium–tritium, resulting different atomic ratios. The paper presents a study about sorption of protium and mixture of protium and tritium on sponge titanium.

  13. On the conversion of tritium units to mass fractions for hydrologic applications.

    Science.gov (United States)

    Stonestrom, David A; Andraski, Brian J; Cooper, Clay A; Mayers, C Justin; Michel, Robert L

    2013-06-01

    We develop a general equation for converting laboratory-reported tritium levels, expressed either as concentrations (tritium isotope number fractions) or mass-based specific activities, to mass fractions in aqueous systems. Assuming that all tritium is in the form of monotritiated water simplifies the derivation and is shown to be reasonable for most environmental settings encountered in practice. The general equation is nonlinear. For tritium concentrations c less than 4.5 × 10(12) tritium units (TU) - i.e. specific tritium activitiestritium isotopes in the absence of sample-specific data. Variation in the relative abundances of non-tritium isotopes in the terrestrial hydrosphere produces a minimum range for the mantissa of the conversion factor of [2.22287; 2.22300].

  14. Method for in-situ detection of tritium in water

    Science.gov (United States)

    Berthold, John W., III; Jeffers, Larry A.

    1999-12-01

    The objective of this project was to design a monitoring system capable of detecting and quantifying tritium in-situ in ground and surface waters, and in water from effluent lines prior to discharge into public waterways. The design work was successfully completed with the predicted capability to detect tritium levels below 20 nanocuries per liter. The designed system was based on the detection of the low energy beta radiation from the radioactive decay of tritium using a special form of scintillating optical fiber directly in contact with the water to be measured. To support the design, laboratory tests were performed in several areas. Different types of scintillating fiber were tested to determine which would provide optimum system performance. The fibers contained a fluor material in a special cladding configuration which optimizes the absorption of beta radiation. The tritium detection system consists of an immersible sensor module containing the optical fiber and detection electronics as well as signal processing electronics. An umbilical cable is used to interconnect the components. The system design goals included optional permanent installation for routine water monitoring in wells, process and effluent lines or as a potential portable survey tool which could be moved from one location to another. Not all the design goals were met due to the large physical size of the immersible sensor module. Discussed in this paper are the design details of the in-situ tritium beta detector, the tests performed, and results obtained. The work was supported by U.S. Department of Energy (DOE) contract number DE-AC21-96MC33128.

  15. Tritium dynamics in soils and plants grown under three irrigation regimes at a tritium processing facility in Canada.

    Science.gov (United States)

    Mihok, S; Wilk, M; Lapp, A; St-Amant, N; Kwamena, N-O A; Clark, I D

    2016-03-01

    The dynamics of tritium released from nuclear facilities as tritiated water (HTO) have been studied extensively with results incorporated into regulatory assessment models. These models typically estimate organically bound tritium (OBT) for calculating public dose as OBT itself is rarely measured. Higher than expected OBT/HTO ratios in plants and soils are an emerging issue that is not well understood. To support the improvement of models, an experimental garden was set up in 2012 at a tritium processing facility in Pembroke, Ontario to characterize the circumstances under which high OBT/HTO ratios may arise. Soils and plants were sampled weekly to coincide with detailed air and stack monitoring. The design included a plot of native grass/soil, contrasted with sod and vegetables grown in barrels with commercial topsoil under natural rain and either low or high tritium irrigation water. Air monitoring indicated that the plume was present infrequently at concentrations of up to about 100 Bq/m(3) (the garden was not in a major wind sector). Mean air concentrations during the day on workdays (HTO 10.3 Bq/m(3), HT 5.8 Bq/m(3)) were higher than at other times (0.7-2.6 Bq/m(3)). Mean Tissue Free Water Tritium (TFWT) in plants and soils and OBT/HTO ratios were only very weakly or not at all correlated with releases on a weekly basis. TFWT was equal in soils and plants and in above and below ground parts of vegetables. OBT/HTO ratios in above ground parts of vegetables were above one when the main source of tritium was from high tritium irrigation water (1.5-1.8). Ratios were below one in below ground parts of vegetables when irrigated with high tritium water (0.4-0.6) and above one in vegetables rain-fed or irrigated with low tritium water (1.3-2.8). In contrast, OBT/HTO ratios were very high (9.0-13.5) when the source of tritium was mainly from the atmosphere. TFWT varied considerably through time as a result of SRBT's operations; OBT/HTO ratios showed no clear temporal

  16. Use of passive sampling for atmospheric tritium monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Caldeira Ideias, P.; Pierrard, O.; Tournieux, D. [Institut de Radioprotection et de Surete Nucleaire - IRSN (France); Tenailleau, L. [Marine nationale (France)

    2014-07-01

    Tritium is one of the most important radionuclide in environmental radiological monitoring. In French civil and military nuclear facilities, the releases levels are between 100 to 100 000 higher than any other radionuclide (rare gas excluded). Moreover these levels will probably increase in the next decades. With an average energy of 6 keV, the beta particle from tritium radioactive decay is difficult to detect and quantify within the environmental levels. To monitor the tritium in the air, French actors (authorities, operator, and experts) commonly use atmospheric bubblers and water vapour condensers. This type of sampling approach is time-consuming and very costly. To simplify and complete these methods, the Institute for Radiological Protection and Nuclear Safety (IRSN), had developed an atmospheric tritium monitoring device based on passive sampling. The passive sampler developed consists in a small container designed with a patented specific geometry and filled with 13X molecular sieve. This system is based on free diffusion flow principle (Fick's law). The driving force is the partial pressure gradient existing between the environmental atmosphere and the passive sampler. The constancy of the sampling rate for different moisture conditions assures the representativeness of the proposed device. The desorption bench developed specifically allows the recovery of 99% of the water vapour sampled in the molecular sieve. More than 99% of the sampled tritium (HTO) activity is recovered in the range between 0 and 100 Bq.L{sup -1}. Above 100 Bq.L{sup -1} to 25 k Bq.L{sup -1} (max tested activity), it was verified that no more than 3% of the tritium remains in the molecular sieve.. Thus, the use of passive sampler provides: - a representative sampling method, - a good detection limit (0,01 Bq.m{sup -3}), - no electric power supply needs, - a wide range of sampling duration (1 day to 1 month), - a low-cost method for monitoring. Different performance tests were

  17. Drinking water standard for tritium-what's the risk?

    Science.gov (United States)

    Kocher, D C; Hoffman, F O

    2011-09-01

    This paper presents an assessment of lifetime risks of cancer incidence associated with the drinking water standard for tritium established by the U.S. Environmental Protection Agency (USEPA); this standard is an annual-average maximum contaminant level (MCL) of 740 Bq L(-1). This risk assessment has several defining characteristics: (1) an accounting of uncertainty in all parameters that relate a given concentration of tritium in drinking water to lifetime risk (except the number of days of consumption of drinking water in a year and the number of years of consumption) and an accounting of correlations of uncertain parameters to obtain probability distributions that represent uncertainty in estimated lifetime risks of cancer incidence; (2) inclusion of a radiation effectiveness factor (REF) to represent an increased biological effectiveness of low-energy electrons emitted in decay of tritium compared with high-energy photons; (3) use of recent estimates of risks of cancer incidence from exposure to high-energy photons, including the dependence of risks on an individual's gender and age, in the BEIR VII report; and (4) inclusion of risks of incidence of skin cancer, principally basal cell carcinoma. By assuming ingestion of tritium in drinking water at the MCL over an average life expectancy of 80 y in females and 75 y in males, 95% credibility intervals of lifetime risks of cancer incidence obtained in this assessment are (0.35, 12) × 10(-4) in females and (0.30, 15) × 10(-4) in males. Mean risks, which are considered to provide the best single measure of expected risks, are about 3 × 10(-4) in both genders. In comparison, USEPA's point estimate of the lifetime risk of cancer incidence, assuming a daily consumption of drinking water of 2 L over an average life expectancy of 75.2 y and excluding an REF for tritium and incidence of skin cancer, is 5.6 × 10(-5). Probability distributions of annual equivalent doses to the whole body associated with the drinking

  18. Study on the temperature control mechanism of the tritium breeding blanket for CFETR

    Science.gov (United States)

    Liu, Changle; Qiu, Yang; Zhang, Jie; Zhang, Jianzhong; Li, Lei; Yao, Damao; Li, Guoqiang; Gao, Xiang; Wu, Songtao; Wan, Yuanxi

    2017-12-01

    The Chinese fusion engineering testing reactor (CFETR) will demonstrate tritium self- sufficiency using a tritium breeding blanket for the tritium fuel cycle. The temperature control mechanism (TCM) involves the tritium production of the breeding blanket and has an impact on tritium self-sufficiency. In this letter, the CFETR tritium target is addressed according to its missions. TCM research on the neutronics and thermal hydraulics issues for the CFETR blanket is presented. The key concerns regarding the blanket design for tritium production under temperature field control are depicted. A systematic theory on the TCM is established based on a multiplier blanket model. In particular, a closed-loop method is developed for the mechanism with universal function solutions, which is employed in the CFETR blanket design activity for tritium production. A tritium accumulation phenomenon is found close to the coolant in the blanket interior, which has a very important impact on current blanket concepts using water coolant inside the blanket. In addition, an optimal tritium breeding ratio (TBR) method based on the TCM is proposed, combined with thermal hydraulics and finite element technology. Meanwhile, the energy gain factor is adopted to estimate neutron heat deposition, which is a key parameter relating to the blanket TBR calculations, considering the structural factors. This work will benefit breeding blanket engineering for the CFETR reactor in the future.

  19. A study and analysis on tritium radioactivity and environmental behavior in domestic NPPs

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sang Jun; Lee, Kyeong Jin; Yeom, Jeong Min; Shin, Dae Tewn [Chosun University, Gwangju (Korea, Republic of)

    2015-12-15

    Several analyses on tritium that is the largest release of gas or liquid radioactive waste from domestic PWR and PHWR NPPs were carried out, such as release comparison, directional frequency of wind and tritium behavior changes in environmental samples. First of all, analysis result showed that tritium released from PHWR was more than ten times as gas and double to three times as liquid in comparison to PWR in 2013. Independent release management in NPP units is needed to precisely control and analyze tritium, since there were 2 units of some NPPs having the same amount of release during analysis. In analysis on frequency of wind direction, average range showed 1.7 to 11.5% by 16-point compass. In case of analysis on sampling points by wind direction, Result showed most of the sampling points are right in places. However, There are some areas needed to examine. In analysis on tritium concentration changes in environmental samples, tritium concentration near NPPs was higher than one far away from NPPs. In case of environmental samples far from PWR, a trace of tritium occur. While, tritium concentration near NPPs was more than or equal to one further from PHWR. In conclusion, tritium occurs considerably in PHWR and is lower than standard in samples. but, it is still detected. Therefore, it is needed to strengthen control in system in NPPs and to consistently monitor tritium in environment.

  20. Scoping Analyses on Tritium Permeation to VHTR Integarted Industrial Application Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chang H. Oh; Eung S. Kim

    2011-03-01

    Tritium permeation is a very important current issue in the very high temperature reactor (VHTR) because tritium is easily permeated through high temperature metallic surfaces. Tritium permeations in the VHTR-integrated systems were investigated in this study using the tritium permeation analysis code (TPAC) that was developed by Idaho National Laboratory (INL). The INL TPAC is a numerical tool that is based on the mass balance equations of tritium containing species and hydrogen (i.e. HT, H2, HTO, HTSO4, TI) coupled with a variety of tritium sources, sink, and permeation models. In the TPAC, ternary fission and thermal neutron caption reactions with 6Li, 7Li 10B, 3He were taken into considerations as tritium sources. Purification and leakage models were implemented as main tritium sinks. Permeation of tritium and H2 through pipes, vessels, and heat exchangers were considered as main tritium transport paths. In addition, electroyzer and isotope exchange models were developed for analyzing hydrogen production systems including high temperature electrolysis (HTSE) and sulfur-iodine processes.

  1. Problematics due to tritium in materials in the nuclear field - some examples; Problematiques liees au tritium dans les materiaux dans le domaine nucleaire - quelques illustrations

    Energy Technology Data Exchange (ETDEWEB)

    Gastaldi, O. [CEA Cadarache (DEN/DTN/STPA/LPC), 13 - Saint-Paul-lez-Durance (France)

    2007-07-01

    After a presentation of the tritium sources in our environment, is evoked succinctly the different ways to produce it. Then, for each reactor type, are presented the main problematics due to tritium. In this part, the questions of tritium transfer are illustrated for fission reactors: pressurized water reactors, CANDU reactors and for fast neutrons reactors. The case of fusion tokamaks is described more particularly. Several aspects are presented successively: the requirement to produce it in-situ with fitted materials, the definition of a short fuel cycle allowing to recover important quantities of tritium having not react...In a last part, are presented the aspects directly induced by the behaviour of tritium in materials. The first point concerned is the control of the tritium inventory in a fusion tokamak, for safety reasons. Examples are given from experiment feedback on running fusion tokamaks. A projection at the ITER case is proposed. The mechanisms leading to tritium retention according to the materials considered at the present time are analyzed and synthesized. The second important point is the tritium management at the end of the tokamak running. The specific problematics of this management are presented. (O.M.)

  2. Accounting and Control of Tritium at the Tritium Process Laboratory (TPL) of JAERI - Results of 15-year Operation and Research Activity -

    Science.gov (United States)

    Nishi, Masataka; Yamanishi, Toshihiko; Hayashi, Takumi; Yamada, Masayuki; Suzuki, Takumi

    Research and development work of fuel processing technology and tritium safe-handling technology necessary for fusion reactors has been performed at the Tritium Process Laboratory (TPL) of JAERI. TPL is the first facility in Japan permitted to handle tritium of more than 1g (about 0.36PBq), and its operation itself is also important for the development of fusion reactor facility in the viewpoint of tritium control. Various experiments have been carried out at TPL safely since 1988 controlling 22PBq of tritium as the maximum observing regulations. In addition to the regulatory accounting and control, detailed independent control in TPL was planned and was established throughits15-yearsafe-operation. For future fusion fuel facility where kilograms of tritium will be handled, method of tritium accounting has been researched and some new technologies have been developed at TPL. Results of TPL operation and of the research activity in it contributed the completion of the engineering design of ITER. Further research activity on tritium accounting and control is in progress in TPL for the future fusion reactors.

  3. Sensitivity analysis of tritium breeding ratio and startup inventory for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Lei; Chen, Hongli; Zeng, Qin, E-mail: zengqin@ustc.edu.cn

    2016-11-15

    Highlights: • Through the calculation method of the model, it was found that the increase of the artificially determined startup inventory I0 causes significant increase of TBRreq and the increase of the achievable tritium breeding ratio TBRachiv leads to the decrease of the Im. • The increase of fueling efficiency and fractional burnup significantly contributes to the decrease of both Im and TBRreq, while the increase of the duty time and availability results in the decrease of TBRreq and the proportional increase of Im. • The outer tritium plant parameters of some subsystems that have relatively big tritium throughput have intense influence on either Im or TBRreq. - Abstract: In order to evaluate the tritium self-sufficiency of fusion plant, citing CFETR (Chinese Fusion Engineering Testing Reactor) as an example, a modified tritium fuel cycle model was developed. The calculation method of this model to obtain the minimum startup inventory I{sub m} and its corresponding required minimum tritium breeding ratio TBR{sub req} was first introduced. Then the model was utilized to analyze the influence on I{sub m} and TBR{sub req} by all tritium cycle parameters that were classified into two categories, namely, the tritium burning parameters and the outer tritium plant parameters. As for the tritium burning parameters, the increase of fueling efficiency and fractional burnup significantly contributes to the decrease of both I{sub m} and TBR{sub req}, while the increase of the duty time and availability results in the decrease of TBR{sub req} and the proportional increase of I{sub m}. As for the outer tritium plant parameters, it was found that the outer tritium plant parameters of some subsystems that have relatively big tritium throughput have intense influence on either I{sub m} or TBR{sub req}.

  4. Analysis of tritium behaviour and recovery from a water-cooled Pb17Li blanket

    Energy Technology Data Exchange (ETDEWEB)

    Malara, C. [Institute Regional des Materiaux Avances, Ispra (Italy); Casini, G. [Systems Engineering and Informatics Institute, JRC Ispra, Ispra (Vatican City State, Holy See) (Italy); Viola, A. [Department of Chemical Engineering, University of Cagliari, Cagliari (Italy)

    1995-03-01

    The question of the tritium recovery in water-cooled Pb17Li blankets has been under investigation for several years at JRC Ispra. The method which has been more extensively analysed is that of slowly circulating the breeder out from the blanket units and of extracting the tritium from it outside the plasma vacuum vessel by helium gas purging or vacuum degassing in a suited process apparatus. A computerized model of the tritium behaviour in the blanket units and in the extraction system was developed. It includes four submodels: (1) tritium permeation process from the breeder to the cooling water as a function of the local operative conditions (tritium concentration in Pb17Li, breeder temperature and flow rate); (2) tritium mass balance in each breeding unit; (3) tritium desorption from the breeder material to the gas phase of the extraction system; (4) tritium extraction efficiency as a function of the design parameters of the recovery apparatus. In the present paper, on the basis of this model, a parametric study of the tritium permeation rate in the cooling water and of the tritium inventory in the blanket is carried out. Results are reported and discussed in terms of dimensionless groups which describe the relative effects of the overall resistance on tritium transfer to the cooling water (with and without permeation barriers), circulating Pb17Li flow rate and extraction efficiency of the tritium recovery unit. The parametric study is extended to the recovery unit in the case of tritium extraction by helium purge or vacuum degassing in a droplet spray unit. (orig.).

  5. Tritium purification via zirconium--manganese--iron alloy getter St 909 in flow processes

    Energy Technology Data Exchange (ETDEWEB)

    Baker, J.D.; Meikrantz, D.H.; Pawelko, R.J.; Anderl, R.A. (Idaho National Engineering Laboratory, EG G Idaho, Inc., Idaho Falls, Idaho 83415-7111 (United States)); Tuggle, D.G. (Los Alamos National Laboratory, Los Alamos, New Mexico 87544 (United States))

    1994-03-01

    A zirconium--manganese--iron alloy, St 909, was evaluated as a purifier in tritium handling, transport, and storage applications. High efficiency removal of CH[sub 4], CO, CO[sub 2], NH[sub 3], and O[sub 2] was observed at concentrations of 0.1% to 1% in helium. Gas streams at 100--5000 sccm were passed through getters operated at 600--800 [degree]C. On-getter residence times of two seconds were required to achieve [gt]99% removal of these reactive impurities. At this removal efficiency level, the individual impurity capacity of 100 g of St 909 purifier at 800 [degree]C was 0.59, 0.28, 0.19, 0.14, and 0.12 moles of CH[sub 4], CO, CO[sub 2], O[sub 2], and NH[sub 3], respectively. Hydrogen containing gasses, CH[sub 4] and NH[sub 3] were cracked on the purifier and the resultant elemental hydrogen was released. Only 8[plus minus]2 sccm of H[sub 2] were retained on 100 g of St 909 at 800 [degree]C. These features suggest that this alloy can be employed as an efficient purifier for hydrogen isotopes in inert gas, nitrogen, or perhaps even H, D, or T streams.

  6. Tritium purification via zirconium-manganese-iron alloy getter st 909 in flow processes

    Energy Technology Data Exchange (ETDEWEB)

    Baker, J.D.; Meikrantz, D.H.; Pawelko, R. J.; Anderl, R.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States)]|[EC& G Idaho, Inc., Idaho Falls, ID (United States); Tuggle, D.G. [Los Alamos National LAb., NM (United States)

    1995-03-01

    A zirconium-manganese-iron alloy, St 909, was evaluated as a purifier in tritium handling, transport, and storage applications. High efficiency removal of CH{sub 4}, CO, CO{sub 2}, NH{sub 3}, and O{sub 2} was observed at concentrations of 0.1 to 1% in helium. Gas streams at 100 to 5000 sccm were passed through getters operated at 500-800{degree}C. On-getter residence times of two seconds were required to achieve > 99% removal of these reactive impurities. At this removal efficiency level, the individual impurity capacity of 100 g of St 909 purifier at 800{degree}C was 0.59, 0.28, 0.19, 0.14 and 0.12 moles of CH{sub 4}, CO, CO{sub 2}, O{sub 2} and NH{sub 3}, respectively. Hydrogen containing gases, CH{sub 4} and NH{sub 3}, were cracked on the purifier and the resultant elemental hydrogen was released. Only 8{+-}2 scc of H{sub 2} were retained on 100 g of St 909 at 800{degree}C. These features suggest that this alloy can be employed as an efficient purifier for hydrogen isotopes in inert gas, nitrogen, or perhaps even H, D, or T streams. 12 refs., 4 figs., 1 tab.

  7. Deuterium migration in nuclear graphite: Consequences for the behavior of tritium in CO{sub 2}-cooled reactors and for the decontamination of irradiated graphite waste

    Energy Technology Data Exchange (ETDEWEB)

    Le Guillou, M. [Institut de Physique Nucléaire de Lyon, CNRS/IN2P3 UMR 5822, Université Claude Bernard Lyon 1, Université de Lyon – 4, rue Enrico Fermi, F-69622 Villeurbanne cedex (France); Agence nationale pour la gestion des déchets radioactifs, DRD/CM – 1-7, rue Jean Monnet, Parc de la Croix-Blanche, F-92298 Châtenay-Malabry cedex (France); Toulhoat, N., E-mail: nelly.toulhoat@univ-lyon1.fr [Institut de Physique Nucléaire de Lyon, CNRS/IN2P3 UMR 5822, Université Claude Bernard Lyon 1, Université de Lyon – 4, rue Enrico Fermi, F-69622 Villeurbanne cedex (France); CEA/DEN – Centre de Saclay, F-91191 Gif-sur-Yvette cedex (France); Pipon, Y. [Institut de Physique Nucléaire de Lyon, CNRS/IN2P3 UMR 5822, Université Claude Bernard Lyon 1, Université de Lyon – 4, rue Enrico Fermi, F-69622 Villeurbanne cedex (France); Institut Universitaire Technologique, Université Claude Bernard Lyon 1, Université de Lyon – 43, boulevard du 11 novembre 1918, F-69622 Villeurbanne cedex (France); Moncoffre, N. [Institut de Physique Nucléaire de Lyon, CNRS/IN2P3 UMR 5822, Université Claude Bernard Lyon 1, Université de Lyon – 4, rue Enrico Fermi, F-69622 Villeurbanne cedex (France); Khodja, H. [Laboratoire d’Etude des Eléments Légers, CEA/DSM/IRAMIS/NIMBE, UMR 3299 SIS2M – Centre de Saclay, F-91191 Gif-sur-Yvette cedex (France)

    2015-06-15

    total amount produced over a reactor operating time corresponding to about 11 effective full-power years. Moreover, it would mainly concern the tritium located close to the free surfaces. Furthermore, the total extraction of the remaining tritium in graphite waste should be more efficient in dry inert gas than in humid gas, but would require temperatures higher than 1300 °C for the total removal of the most deeply located deuterium.

  8. Deuterium migration in nuclear graphite: Consequences for the behavior of tritium in CO2-cooled reactors and for the decontamination of irradiated graphite waste

    Science.gov (United States)

    Le Guillou, M.; Toulhoat, N.; Pipon, Y.; Moncoffre, N.; Khodja, H.

    2015-06-01

    over a reactor operating time corresponding to about 11 effective full-power years. Moreover, it would mainly concern the tritium located close to the free surfaces. Furthermore, the total extraction of the remaining tritium in graphite waste should be more efficient in dry inert gas than in humid gas, but would require temperatures higher than 1300 °C for the total removal of the most deeply located deuterium.

  9. Detector-related backgrounds in the Karlsruhe Tritium Neutrino Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Leber, Michelle, E-mail: mleber@u.washington.edu [Center for Experimental Nuclear Physics and Astrophysics, University of Washington, Box 354290 Seattle, WA 98195-4290 (United States)

    2011-12-15

    The Karlsruhe Tritium Neutrino Experiment, or KATRIN, is a next generation tritium beta decay experiment to directly measure neutrino mass with an expected sensitivity of 0.2 eV [KATRIN Design Report 2004 see (http://www-ik.fzk.de/{approx}katrin/)]. Neutrino mass does not fit into the Standard Model, and determining this mass may set the scale of new physics. To achieve this level of sensitivity, backgrounds in the experiment must be minimized. A complete Geant4 [Agostinelli S et al. 2003 Nuclear Instr. Methods A 506 250-303 Allison J et al. 2006 IEEE Transactions on Nuclear Science53 No. 1 270-8] simulation of KATRIN's focal plane detector and surrounding region is being developed. These simulations will help guide the design and selection of shielding and detector construction materials to reduce backgrounds from cosmic rays and natural radioactivity.

  10. 1,4-diphenylbutadiyne as a potential tritium getter

    Energy Technology Data Exchange (ETDEWEB)

    Miller, H.H.; Bissell, E.E.; Tsugawa, R.T.; Souers, P.C.

    1980-10-01

    Research on the acetylene compound 1,4-diphenylbutadiyne is an effort to develop an air-operative tritium gas scavenger. T/sub 2/ adds to the acetylene bond of the organic in the presence of a metal catalyst. The catalyst also stimulates the oxidation reaction as well. The butadiyne compound has shown good reaction efficiency at 300 ppM T/sub 2/ in static dry air. At this concentration 75% of the scavenged tritium was in the organic. This work has expanded to the investigation of liquid acetylenes, metal acetylene complexes, organometallics and acetylene based alcohols. The best of these compounds has gettered 100% of 10 to 500 ppM T/sub 2/ for both static and dynamic air flow conditions.

  11. Health physics manual of good practices for tritium facilities

    Energy Technology Data Exchange (ETDEWEB)

    Blauvelt, R.K.; Deaton, M.R.; Gill, J.T. [and others

    1991-12-01

    The purpose of this document is to provide written guidance defining the generally accepted good practices in use at Department of Energy (DOE) tritium facilities. A {open_quotes}good practice{close_quotes} is an action, policy, or procedure that enhances the radiation protection program at a DOE site. The information selected for inclusion in this document should help readers achieve an understanding of the key radiation protection issues at tritium facilities and provide guidance as to what characterizes excellence from a radiation protection point of view. The ALARA (As Low as Reasonable Achievable) program at DOE sites should be based, in part, on following the good practices that apply to their operations.

  12. Fabrication, properties, and tritium recovery from solid breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.E. (Argonne National Lab., IL (USA)); Kondo, T. (Japan Atomic Energy Research Inst., Tokyo (Japan)); Roux, N. (CEA Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)); Tanaka, S. (Tokyo Univ. (Japan)); Vollath, D. (Kernforschungszentrum Karlsruhe GmbH (Germany, F.R.))

    1991-01-01

    The breeding blanket is a key component of the fusion reactor because it directly involves tritium breeding and energy extraction, both of which are critical to development of fusion power. The lithium ceramics continue to show promise as candidate breeder materials. This promise was recognized by the International Thermonuclear Experimental Reactor (ITER) design team in its selection of ceramics as the first option for the ITER breeder material. Blanket design studies have indicated properties in the candidate materials data base that need further investigation. Current studies are focusing on tritium release behavior at high burnup, changes in thermophysical properties with burnup, compatibility between the ceramic breeder and beryllium multiplier, and phase changes with burnup. Laboratory and in-reactor tests, some as part of an international collaboration for development of ceramic breeder materials, are underway. 133 refs., 1 fig.

  13. Tritium analysis of urine samples from the general Korean public.

    Science.gov (United States)

    Yoon, Seokwon; Ha, Wi-Ho; Lee, Seung-Sook

    2013-11-01

    The tritium concentrations of urine samples and the effective dose of the general Korean public were evaluated. To achieve accurate HTO analysis of urine samples, we established the optimal conditions for measuring the HTO content of urine samples. Urine samples from 50 Koreans who do not work at a nuclear facility were analyzed on the basis of the results. The average urine analysis result was 2.8 ±1 .4 Bq/L, and the range was 1.8-5.6 Bq/L. The measured values were lower than those reported for other countries. These results show that environmental factors and lifestyle differences are the main factors affecting the tritium level of the general public. © 2013 Elsevier Ltd. All rights reserved.

  14. Age-dependent dose coefficients for tritium in Asian populations

    Energy Technology Data Exchange (ETDEWEB)

    Trivedi, A

    1999-10-01

    The International Commission on Radiological Protection (ICRP) Publications 56 (1989) and 67 (1993) have prescribed the biokinetic models and age-dependent dose coefficients for tritiated water and organically bound tritium. The dose coefficients are computed from values selected to specify the anatomical, morphological and physiological characteristics of a three-month-old, one-year-old, five-year-old, 10-year-old, 15-year-old and adult (Reference Man) Caucasian living in North America and Western Europe. However, values for Reference Man and other age groups are not directly applicable to Asians, because of differences in race, custom, dietary habits and climatic conditions. An Asian Man model, including five age groups, has been proposed by Tanaka and Kawamura (1996, 1998) for use in internal dosimetry. The basic concept of the ICRP Reference Man and the system describing body composition in ICRP Publication 23 (1975) were used. Reference values for Asians were given for the body weight and height, the mass of soft tissue, the mass of body water and the daily fluid balance, and are used to compute the dose coefficients for tritium. The age-dependent dose coefficients for Asians for tritiated water intakes are smaller by 20 to 30% of the currently prescribed values (Trivedi, 1998). The reduction in the dose coefficient values is caused by the increased daily fluid balance among Asians. The dose coefficient for tritiated water is 1.4 x 10{sup -11} Sv Bq{sup -1} for Asian Man compared to 2.0 x 10{sup -11} Sv Bq{sup -1} for Reference Man. The dose coefficients for organically bound tritium are only marginally different from those of the ICRP values. The dose coefficient for organically bound tritium for Asian Man is 4.0 x 10{sup -11} Sv Bq{sup -11} compared to 4.6 x 10{sup -11} Sv Bq{sup -1} for Reference Man. (author)

  15. Tritium Cycle Design for He-cooled Blankets for Demo

    Energy Technology Data Exchange (ETDEWEB)

    Sedano, L. A.

    2007-09-27

    Final goal of COMPU task is to develop a reliable tritium Process Flow Diagram (PFD) modelling tool for DEMO tritium cycle. With this aim, the COMPU task is devoted to: (1) Review of existing available documentation related on configuration layouts, and systems and tritium control process key technologies. (2) To select those validated and considered relevant as basis for code development. (3) Implement results from (1), and (2) in the PFD TRICICLO. This fi rst deliverable focuses on item (1) and is conceived as a managerial tool to: (1) establish and discuss the correct inputs, (2) to identify existing lack of basic information and (3) to establish the general demands and characteristics for the development of an advanced PFD model. Thus, in order to discuss and determine the basic information required for future new developments of the task, this report presents a review of the documentation of: (1) The outline of total cycle and system configuration with the main tritium system design specifications. (2) The ultimate processing technologies with the associated design of their implementing units. (3) Key parameters needed to describe processes and modes of operation of the system units. (4) An overview of the existing models for cycle and units with a general analysis of their performances and limitations. Thus, this report is a direct review of the base information generated previously in the context of tasks of the EU FT Programmers (reported in EFDA Green Books) and available results in open fields literature provided by parallel Programmes abroad (JP, US, RF). (Author) 102 refs.

  16. Synthesis of tritium labelled phosphonate analogues of sphinganine-1-phosphate

    Energy Technology Data Exchange (ETDEWEB)

    Schick, Andreas; Schwarzmann, Guenter; Kolter, Thomas; Sandhoff, Konrad [Universitaet Bonn, Inst. fuer Organische Chemie und Biochemie, Bonn (Germany)

    1997-05-01

    Tritiated phosphonate analogues 9 and 10 are prepared as analogues of sphinganine-1-phosphate 4. The key step in this synthesis is the catalytic tritiation of the triple bond in reduction of the protected diethyl-3-(S)-tert.-butoxycarbonylamino -4-hydroxy-5-tridecinyl-1-phosphonate by means of sodium boro[{sup 3}H]hydride as tritium source. These compounds are synthesized to study their metabolic stability and to evaluate their biological properties. (author).

  17. Analysis of a global database containing tritium in precipitation

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, R. L. [Savannah River Site (SRS), Aiken, SC (United States); Rabun, R. L. [Savannah River Site (SRS), Aiken, SC (United States); Heath, M. [Savannah River Site (SRS), Aiken, SC (United States)

    2016-02-17

    The International Atomic Energy Agency (IAEA) directed the collection of tritium in water samples from the mid-1950s to 2009. The Global Network of Isotopes in Precipitation (GNIP) data examined the airborne movement of isotope releases to the environment, with an objective of collecting spatial data on the isotope content of precipitation across the globe. The initial motivation was to monitor atmospheric thermonuclear test fallout through tritium, deuterium, and oxygen isotope concentrations, but after the 1970s the focus changed to being an observation network of stable hydrogen and oxygen isotope data for hydrologic studies. The GNIP database provides a wealth of tritium data collections over a long period of time. The work performed here primarily examined data features in the past 30 years (after much of the effects of above-ground nuclear testing in the late 1950s to early 1960s decayed away), revealing potentially unknown tritium sources. The available data at GNIP were reorganized to allow for evaluation of trends in the data both temporally and spatially. Several interesting cases were revealed, including relatively high measured concentrations in the Atlantic and Indian Oceans, Russia, Norway, as well as an increase in background concentration at a collector in South Korea after 2004. Recent data from stations in the southeastern United States nearest to the Savannah River Site do not indicate any high values. Meteorological impacts have not been considered in this study. Further research to assess the likely source location of interesting cases using transport simulations and/or literature searches is warranted.

  18. Predicted versus measured tritium oxide concentrations at SRS

    Energy Technology Data Exchange (ETDEWEB)

    Simpkins, A.A.

    1995-12-01

    Measured tritium oxide concentrations at various offsite locations are compared with concentrations predicted by three computer codes that are utilized at SRS to predict doses to the maximally exposed offsite individuals. Annual average concentrations predicted by the computer programs were compared with measured average concentrations taken form data contained in the last ten years of SRS Environmental Reports. The computer programs used for the comparison are ACAIRQ, CAP88, and MAXIGASP.

  19. IN-LINE CHEMICAL SENSOR DEPLOYMENT IN A TRITIUM PLANT

    Energy Technology Data Exchange (ETDEWEB)

    Tovo, L.; Wright, J.; Torres, R.; Peters, B.

    2013-10-02

    The Savannah River Tritium Plant (TP) relies on well understood but aging sensor technology for process gas analysis. Though new sensor technologies have been brought to various readiness levels, the TP has been reluctant to install technologies that have not been tested in tritium service. This gap between sensor technology development and incorporating new technologies into practical applications demonstrates fundamental challenges that exist when transitioning from status quo to state-of-the-art in an extreme environment such as a tritium plant. These challenges stem from three root obstacles: 1) The need for a comprehensive assessment of process sensing needs and requirements; 2) The lack of a pick-list of process-compatible sensor technologies; and 3) The need to test technologies in a tritium-contaminated process environment without risking production. At Savannah River, these issues are being addressed in a two phase project. In the first phase, TP sensing requirements were determined by a team of process experts. Meanwhile, Savannah River National Laboratory sensor experts identified candidate technologies and related them to the TP processing requirements. The resulting roadmap links the candidate technologies to actual plant needs. To provide accurate assessments of how a candidate sensor technology would perform in a contaminated process environment, an instrument demonstration station was established within a TP glove box. This station was fabricated to TP process requirements and designed to handle high activity samples. The combination of roadmap and demonstration station provides the following assets: Creates a partnership between the process engineers and researchers for sensor selection, maturation, and insertion, Selects the right sensors for process conditions Provides a means for safely inserting new sensor technology into the process without risking production, and Provides a means to evaluate off normal occurrences where and when they occur

  20. Impact of tritium around EDF nuclear power plants.

    Science.gov (United States)

    Le Guen, B

    2009-06-01

    Although the radionuclide tritium is found in its natural state, its presence in the environment is often associated with nuclear power generation. With the construction of the new EPR reactor at Flamanville under way, and the renewal of release permits for existing sites, this paper seeks to provide a summary of scientific facts, measurements taken around nuclear sites and impact studies regarding the impact assessment of this radionuclide on humans and the environment.

  1. JET Tokamak, preparation of a safety case for tritium operations

    Energy Technology Data Exchange (ETDEWEB)

    Boyer, Helen, E-mail: helen.boyer@ccfe.ac.uk [CCFE, Culham Science Centre (United Kingdom); Plummer, David; Johnston, Jane [CCFE, Culham Science Centre (United Kingdom)

    2016-11-01

    Highlights: • A safety case incorporating technical and ITER related upgrades. • Hazard analysis reworked to include new modelling assessments. • Fitness for purpose assessment of safety controls. - Abstract: A new Safety Case is required to permit tritium operations on JET during the forthcoming DTE2 campaign. The outputs, benefits and lessons learned associated with the production of this Safety Case are presented. The changes that have occurred to the Safety Case methodology since the last JET tritium Safety Case are reviewed. Consideration is given to the effects of modifications, particularly ITER related changes, made to the JET and the impact these have on the hazard assessments as well as normal operations. Several specialized assessments, including recent MELCOR modelling, have been undertaken to support the production of this Safety Case and the impact of these assessments is outlined. Discussion of the preliminary actions being taken to progress implementation of this Safety Case is provided, highlighting new methods to improve the dissemination of the key Safety Case results to the plant operators. Finally, the work required to complete this Safety Case, before the next tritium campaign, is summarized.

  2. Experimental Tritium Cleanup System availability analysis from 1984 to 1992

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, L.C. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Taylor, G.L. [Los Alamos National Lab., NM (United States)

    1993-05-01

    This report gives the availability percentage of the Experimental Tritium Cleanup System (ETC) at the Tritium Systems Test Assembly (TSTA), which is a fusion research and technology facility at the Los Alamos National Laboratory. The component failure reports, the numbers of components, and operating times or demands are all given in this report. Sample calculations of the failure rates obtained from these data are given in the appendices. While future fusion experiments might use different or more advanced means to detritiate room air, the analysis of this system gives a data point for an actual detritiation system. Such a data point can be extrapolated for comparison with fault tree results on system designs, or can be used in a Bayesian failure rate analysis for estimating reliability of a new type of system. The nine years of testing operations on TSTA`s ETC result in a reasonable average availability value of 92% for the maximal tritium release event. The failure rates for new systems are expected to be lower than for the TSTA ETC, since improvements will be made in the design of the room air detritiation system based on the TSTA system experiences. Nonetheless, these TSTA data should be useful for future fusion reactor design work and safety assessment tasks.

  3. [Tritium in the Water System of the Techa River].

    Science.gov (United States)

    Chebotina, M Ja; Nikolin, O A

    2016-01-01

    The aim of the paper is to study modern tritium levels in various sources of the drinking water supply in the settlements situated in the riverside zone of the Techa. Almost everywhere the water entering water-conduit wells from deep slits (100-180 m) contains averagely 2-3 times higher tritium concentrations than the water from less deep personal wells, slits and springs. Tritium levels in the drinking water supply decrease with the distance from the dam; while in wells, springs and personal wells they are constant all along the river. The observed phenomenon can be explained by the fact that the river bed of the Techa is situated at a break zone of the earth crust, where the contaminated deep water penetrates from the reservoirs of the "Mayak" enterprise situated in the upper part of the regulated river bed. Less deep water sources (personal wells, slits and springs) receive predominantly flood, atmospheric and subsoil waters and are not connected with the reservoirs.

  4. Assessment of the importance of neutron multiplication for tritium production

    Science.gov (United States)

    Chiovaro, P.; Di Maio, P. A.

    2017-01-01

    One of the major requirements for a fusion power plant in the future is tritium self-sufficiency. For this reason the scientific community has dedicated a lot of effort to research activity on reactor tritium breeding blankets. In the framework of the international project DEMO, many concepts of breeding blanket have been taken into account and some of them will be tested in the experimental reactor ITER by means of appropriate test blanket modules (TBMs). All the breeding blanket concepts rely on the adoption of binary systems composed of a material acting as neutronic multiplier and another as a breeder. This paper addresses a neutronic feature of these kinds of systems. In particular, attention has been focused on the assessment of the importance of neutrons coming from multiplication reactions for the production of tritium. A theoretical framework has been set up and a procedure to evaluate the performance of the multiplier-breeder systems, under the aforementioned point of view, has been developed. Moreover, the model set up has been applied to helium cooled lithium lead and helium cooled pebble bad TBMs under irradiation in ITER and the results have been critically discussed.

  5. Hydrogen permeation through tritium permeation barrier in Pb-17Li

    Energy Technology Data Exchange (ETDEWEB)

    Aiello, A. E-mail: aiello@brasimone.enea.ie; Benamati, G.; Chini, M.; Fazio, C.; Serra, E.; Yao, Z

    2001-11-01

    One of the main problems in the development of water cooled lithium lead (WCLL) DEMO fusion reactor is the reduction of the tritium permeation from the Pb-17Li, or the plasma, into the cooling water. The control of tritium losses is an important issue in fusion technology because of its safety and operational implications. This goal can be achieved using a tritium permeation barrier (TPB). The use of aluminium rich coatings, which forms Al{sub 2}O{sub 3} at their surface, has been selected as reference solution for WCLL blanket in order to produce reliable TPB. The hot dipping process is one of the two candidates for the production of coatings on large blanket segments. The effectiveness of hot dipped aluminium coating on MANET II steel has been verified in gas phase and in liquid Pb-17Li, using a test apparatus named Corelli II. The permeation rate measured in gas phase is one order of magnitude lower than the one in liquid metal phase. Performing SEM-EDS analysis on the specimen, it was observed that micro cracks on the coating surface were present. The permeation curves in gas and Pb-17Li are reported and discussed. The characteristics of the new experimental device Vivaldi will be briefly described.

  6. Qualification of tritium permeation barriers in liquid Pb-17Li

    Energy Technology Data Exchange (ETDEWEB)

    Aiello, A. E-mail: antonio.aiello@brasimone.enea.it; Ricapito, I.; Benamati, G.; Ciampichetti, A

    2003-09-01

    The reduction of tritium permeation from the Pb-17Li, or plasma, into the coolant is of crucial importance in order to reduce the radiological hazard in the steam generator vault as well as in the turbine/condenser area and to optimise the tritium balance in the reactor. The use of aluminium rich coatings has been selected as reference solution for the water cooled lithium lead (WCLL) blanket in order to produce reliable tritium permeation barriers (TPB). TPB qualification activities performed in the past allowed the selection of two reference deposition techniques, the chemical vapour deposition (CVD) process developed on laboratory scale by CEA, and the hot dipping (HD) process developed by FZK. On the basis of the results obtained in the past with the Corelli I-II devices, a new apparatus named Vivaldi was designed to perform comparative tests on two hollow cylindrical specimens in the same operating conditions. The performance of alumina coating on EUROFER 97 steel has been tested in gas and liquid metal phase. The obtained results in terms of permeated fluxes and permeation reduction factors (PRF) are herein presented and discussed. A post experiment examination of coatings was performed by use of optical and SEM microscopy.

  7. Method and device for secure, high-density tritium bonded with carbon

    Science.gov (United States)

    Wertsching, Alan Kevin; Trantor, Troy Joseph; Ebner, Matthias Anthony; Norby, Brad Curtis

    2016-04-05

    A method and device for producing secure, high-density tritium bonded with carbon. A substrate comprising carbon is provided. A precursor is intercalated between carbon in the substrate. The precursor intercalated in the substrate is irradiated until at least a portion of the precursor, preferably a majority of the precursor, is transmutated into tritium and bonds with carbon of the substrate forming bonded tritium. The resulting bonded tritium, tritium bonded with carbon, produces electrons via beta decay. The substrate is preferably a substrate from the list of substrates consisting of highly-ordered pyrolytic graphite, carbon fibers, carbon nanotunes, buckministerfullerenes, and combinations thereof. The precursor is preferably boron-10, more preferably lithium-6. Preferably, thermal neutrons are used to irradiate the precursor. The resulting bonded tritium is preferably used to generate electricity either directly or indirectly.

  8. Distribution of tritium in water vapour and precipitation around Wolsung nuclear power plant.

    Science.gov (United States)

    Chae, Jung-Seok; Lee, Sang-Kuk; Kim, Yongjae; Lee, Jung-Min; Cho, Heung-Joon; Cho, Yong-Woo; Yun, Ju-Yong

    2011-07-01

    The distribution of tritium in water vapour and precipitation with discharge of tritiated water vapour and meteorological factors was studied around the Wolsung nuclear power plant (NPP) site during the period 2004-2008. The tritium concentrations in atmospheric water vapour and precipitation had a temporal variation with relatively high values in the early summer. Spatial distribution of tritium concentrations was affected by various factors such as distance from the NPP site, wind direction, tritium discharge into the atmosphere and atmospheric dispersion factor. The annual mean concentrations of atmospheric HTO and precipitation were correlated with the amount of gaseous tritium released from the Wolsung NPP. The tritium concentrations in precipitation decrease exponentially with an increase of the distance from the Wolsung NPP site.

  9. Tritium permeation experiments using reduced activation ferritic/martensitic steel tube and erbium oxide coating

    Energy Technology Data Exchange (ETDEWEB)

    Takumi Chikada; Masashi Shimada; Robert Pawelko; Takayuki Terai; Takeo Muroga

    2013-09-01

    Low concentration tritium permeation experiments have been performed on uncoated F82H and Er2O3-coated tubular samples in the framework of the Japan-US TITAN collaborative program. Tritium permeability of the uncoated sample with 1.2 ppm tritium showed one order of magnitude lower than that with 100% deuterium. The permeability of the sample with 40 ppm tritium was more than twice higher than that of 1.2 ppm, indicating a surface contribution at the lower tritium concentration. The Er2O3-coated sample showed two orders of magnitude lower permeability than the uncoated sample, and lower permeability than that of the coated plate sample with 100% deuterium. It was also indicated that the memory effect of ion chambers in the primary and secondary circuits was caused by absorption of tritiated water vapor that was generated by isotope exchange reactions between tritium and surface water on the coating.

  10. Tritium labelling of PACAP-38 using a synthetic diiodinated precursor peptide

    DEFF Research Database (Denmark)

    Pedersen, Martin Holst Friborg; Baun, Michael

    2012-01-01

    In the interest of developing efficient methods for tritium labelling peptides, we here demonstrate the successful labelling of PACAP-38 (pituitary adenylate cyclase-activating polypeptide), a 38-mer peptide, using a synthetic diiodinated PACAP-38 precursor. In this example, we employ standard hy...... hydrogenation chemistry with the use of a heterogeneous palladium catalyst and carrier-free tritium gas on a tritium manifold system....

  11. Catalytic membrane reactor for tritium extraction system from He purge

    Energy Technology Data Exchange (ETDEWEB)

    Santucci, Alessia, E-mail: alessia.santucci@enea.it [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy); Incelli, Marco [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy); DEIM, University of Tuscia, Via del Paradiso 47, 01100 Viterbo (Italy); Sansovini, Mirko; Tosti, Silvano [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy)

    2016-11-01

    Highlights: • In the HCBB blanket, the produced tritium is recovered by purging with helium; membrane technologies are able to separate tritium from helium. • The paper presents the results of two experimental campaigns. • In the first, a Pd–Ag diffuser for hydrogen separation is tested at several operating conditions. • In the second, the ability of a Pd–Ag membrane reactor for water decontamination is assessed by performing isotopic swamping and water gas shift reactions. - Abstract: In the Helium Cooled Pebble Bed (HCPB) blanket concept, the produced tritium is recovered purging the breeder with helium at low pressure, thus a tritium extraction system (TES) is foreseen to separate the produced tritium (which contains impurities like water) from the helium gas purge. Several R&D activities are running in parallel to experimentally identify most promising TES technologies: particularly, Pd-based membrane reactors (MR) are under investigation because of their large hydrogen selectivity, continuous operation capability, reliability and compactness. The construction and operation under DEMO relevant conditions (that presently foresee a He purge flow rate of about 10,000 Nm{sup 3}/h and a H{sub 2}/He ratio of 0.1%) of a medium scale MR is scheduled for next year, while presently preliminary experiments on a small scale reactor are performed to identify most suitable operative conditions and catalyst materials. This work presents the results of an experimental campaign carried out on a Pd-based membrane aimed at measuring the capability of this device in separating hydrogen from the helium. Many operative conditions have been investigated by considering different He/H{sub 2} feed flow ratios, several lumen pressures and reactor temperatures. Moreover, the performances of a membrane reactor (composed of a Pd–Ag tube having a wall thickness of about 113 μm, length 500 mm and diameter 10 mm) in processing the water contained in the purge gas have been

  12. Optimizing tritium extraction from a Permeator Against Vacuum (PAV) by dimensional design using different tritium transport modeling tools

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, P., E-mail: pablomiguel.martinez@ciemat.es [CIEMAT-LNF (Laboratorio Nacional de Fusion), Madrid (Spain); Moreno, C. [CIEMAT-LNF (Laboratorio Nacional de Fusion), Madrid (Spain); Martinez, I. [SENER Ingenieria y Sistemas, Provenca 392, 4a 08025 Barcelona (Spain); Sedano, L. [CIEMAT-LNF (Laboratorio Nacional de Fusion), Madrid (Spain)

    2012-08-15

    The Permeator Against Vacuum (PAV) has been conceived as the simplest, cost effective and reliable technology system dedicated to tritium extraction from breeding liquid metals. An optimal design of a PAV requires a detailed hydraulic design optimization for established operational ranges (HCLL at low velocities of {approx}1 mm/s or DCLL in the ranges of tens of cm/s). The present work analyses the PAV extraction efficiency dependency on the design parameters as optimum on-line Tritium Extraction System (TES). Three different models have been built for that purpose: one through physically refined 1D tritium transport computation using TMAP7 (unique simulation tool with QA for ITER); and two further detailed models on 2D/3D FEM tool (COMSOL Multi-physics 4.0). The geometry used in this work is a simplification of Fuskite{sup Registered-Sign} conceptual design developed at CIEMAT, consisting of a set of cylindrical and concentric {alpha}-Fe double membranes enclosing a vacuumed space and in contact with in-pipe flowing LiPb eutectic. The aim of this paper is to give the first steps to establish the optimal design parameters of a PAV and evaluate the state-of-the-art of these models.

  13. Commercial Light Water Reactor -Tritium Extraction Facility Process Waste Assessment (Project S-6091)

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, R.H.; Delley, A.O.; Alexander, G.J.; Clark, E.A.; Holder, J.S.; Lutz, R.N.; Malstrom, R.A.; Nobles, B.R. [Westinghouse Savannah River Co., Aiken, SC (United States); Carson, S.D. [Sandia National Laboratories, New Mexico, NM (United States); Peterson, P.K. [Sandia National Laboratories, New Mexico, NM (United States)

    1997-11-30

    The Savannah River Site (SRS) has been tasked by the Department of Energy (DOE) to design and construct a Tritium Extraction Facility (TEF) to process irradiated tritium producing burnable absorber rods (TPBARs) from a Commercial Light Water Reactor (CLWR). The plan is for the CLWR-TEF to provide tritium to the SRS Replacement Tritium Facility (RTF) in Building 233-H in support of DOE requirements. The CLWR-TEF is being designed to provide 3 kg of new tritium per year, from TPBARS and other sources of tritium (Ref. 1-4).The CLWR TPBAR concept is being developed by Pacific Northwest National Laboratory (PNNL). The TPBAR assemblies will be irradiated in a Commercial Utility light water nuclear reactor and transported to the SRS for tritium extraction and processing at the CLWR-TEF. A Conceptual Design Report for the CLWR-TEF Project was issued in July 1997 (Ref. 4).The scope of this Process Waste Assessment (PWA) will be limited to CLWR-TEF processing of CLWR irradiated TPBARs. Although the CLWR- TEF will also be designed to extract APT tritium-containing materials, they will be excluded at this time to facilitate timely development of this PWA. As with any process, CLWR-TEF waste stream characteristics will depend on process feedstock and contaminant sources. If irradiated APT tritium-containing materials are to be processed in the CLWR-TEF, this PWA should be revised to reflect the introduction of this contaminant source term.

  14. Dose-to-risk conversion factors for low-level tritium exposures

    Energy Technology Data Exchange (ETDEWEB)

    Straume, T.

    1992-09-10

    During the past decade, a large number of radiobiological studies have become available for tritium-many of them focusing on the relative biological effectiveness (RBE) of tritium beta rays. These and previous studies indicate that tritium in body water produces the same spectrum of radiogenic effects, e.g., cancer, genetic effects, developmental abnormalities, and reproductive effects, observed following whole-body exposure to penetrating radiations such as gamma rays and x rays. The only significant difference in biological response between tritium beta-rays and the other common low linear-energy transfer (LET) radiations, such as gamma rays and x rays, appears to be the greater biological effectiveness of tritium beta rays. For example, tritium in the oxide form (HTO) is about 2 to 3 times more effective at low doses or low dose rates than gamma rays from [sup 137]Cs or [sup 60]CO (Straume, 1991). When tritium is bound to organic molecules, RBE values may be somewhat larger than those for HTO. It is now clear from the wealth of tritium data available that RBEs for tritium beta rays are higher than the quality factor of unity generally used in radiation protection.

  15. The tritium storage, radioactive isotope of the hydrogen: materials and aging; Le stockage du tritium, isotope radioactif de l'hydrogene: materiaux et vieillissement

    Energy Technology Data Exchange (ETDEWEB)

    Thiebaut, S.; Moysan, I.; Contreras, S. [CEA Valduc (DTMN/SHDT/LDMP), 21 - Is-sur-Tille (France); Paul-Boncour, V.; Percheron-Guegan, A. [Centre National de la Recherche Scientifique (CNRS-LCMTR), 94 - Thiais (France); Decamps, B

    2007-07-01

    After some generalities on the tritium utilization, this isotope specificities and the interest of the solid storage, this presentation detailed the different materials used: the hydrides. They have the advantage of delivering high purity tritium {sup 3}He free, but the {sup 3}He trapped in the metal induces large structural and microstructural changes in the host lattice leading to modifications of tritium storage properties with aging time which can be seen on Pressure-composition isotherms. In this paper the P-c isotherms evolution are followed and the created defects are characterized by X diffraction and transmission electronic microscopy. (A.L.B.)

  16. Using thermal evolution profiles to infer tritium speciation in nuclear site metals: an aid to decommissioning.

    Science.gov (United States)

    Croudace, Ian W; Warwick, Phil E; Kim, Daeji

    2014-09-16

    Understanding the association and retention of tritium in metals has significance in nuclear decommissioning programs and can lead to cost benefits through waste reduction and recycling of materials. To develop insights, a range of metals from two nuclear sites and one non-nuclear site were investigated which had different exposure histories. Tritium speciation in metals was inferred through incremental heating experiments over the range of 20-900 °C using a Raddec Pyrolyser instrument. Systematic differences in thermal desorption profiles were found for nonirradiated and irradiated metals. In nonirradiated metals (e.g., stainless steel and copper), it was found that significant tritium had become incorporated following prolonged exposure to tritiated water vapor (HTO) or tritium/hydrogen gas (HT) in nuclear facilities. This externally derived tritium enters metals by diffusion with a rate controlled by the metal composition and whether the surface of the metal had been sealed or coated prior to exposure. The tritium is normally trapped in hydrated oxides lying along grain boundaries. In irradiated metals, an additional type of tritium can form internally through neutron capture reactions. The amount formed depends on the concentration and distribution of trace lithium and boron in the metal as well as the integrated neutron flux. Liberating this kind of tritium typically requires temperatures above 800 °C. The pattern of tritium evolution derived from simple thermal desorption experiments allows reliable inferences to be drawn on the likely origin, location, and phases that trap tritium. Any weakly bound tritium liberated at temperatures of ~100 °C is indicative of mostly HTO interactions in the metal. Any strongly bound tritium liberated over the range of 600-900 °C is indicative of neutrogenic tritium formed via neutron capture by trace Li and B. Neutron capture by lithium is likely to be more significant than for boron based on lithium's higher trace

  17. VAPOR PRESSURE ISOTOPE EFFECTS IN THE MEASUREMENT OF ENVIRONMENTAL TRITIUM SAMPLES.

    Energy Technology Data Exchange (ETDEWEB)

    Kuhne, W.

    2012-12-03

    Standard procedures for the measurement of tritium in water samples often require distillation of an appropriate sample aliquot. This distillation process may result in a fractionation of tritiated water and regular light water due to the vapor pressure isotope effect, introducing either a bias or an additional contribution to the total tritium measurement uncertainty. The magnitude of the vapor pressure isotope effect is characterized as functions of the amount of water distilled from the sample aliquot and the heat settings for the distillation process. The tritium concentration in the distillate is higher than the tritium concentration in the sample early in the distillation process, it then sharply decreases due to the vapor pressure isotope effect and becomes lower than the tritium concentration in the sample, until the high tritium concentration retained in the boiling flask is evaporated at the end of the process. At that time, the tritium concentration in the distillate again overestimates the sample tritium concentration. The vapor pressure isotope effect is more pronounced the slower the evaporation and distillation process is conducted; a lower heat setting during the evaporation of the sample results in a larger bias in the tritium measurement. The experimental setup used and the fact that the current study allowed for an investigation of the relative change in vapor pressure isotope effect in the course of the distillation process distinguish it from and extend previously published measurements. The separation factor as a quantitative measure of the vapor pressure isotope effect is found to assume values of 1.034 {+-} 0.033, 1.052 {+-} 0.025, and 1.066 {+-} 0.037, depending on the vigor of the boiling process during distillation of the sample. A lower heat setting in the experimental setup, and therefore a less vigorous boiling process, results in a larger value for the separation factor. For a tritium measurement in water samples, this implies that

  18. Estimation of biological half-life of tritium in coastal region of India.

    Science.gov (United States)

    Singh, Vishwanath P; Pai, R K; Veerender, D D; Vishnu, M S; Vijayan, P; Managanvi, S S; Badiger, N M; Bhat, H R

    2010-12-01

    The present study estimates biological half-life (BHL) of tritium by analysing routine bioassay samples of radiation workers. During 2007-2009 year, 72,100 urine bioassay samples of the workers were analysed by liquid scintillation counting technique for internal dose monitoring for tritium. Two hundred and two subjects were taken for study with minimum 3 μCiL(-1) tritium uptake in their body fluid. The BHL of tritium of subjects ranges from 1 to 16 d with an average of 8.19 d. Human data indicate that the biological retention time ranges from 4 to 18 d with an average of 10 d. The seasonal variations of the BHL of tritium are 3.09 ± 1.48, 6.87 ± 0.58 and 5.73 ± 0.76 d (mean ± SD) for summer, winter and rainy seasons, respectively, for free water tritium in the coastal region of Karnataka, India, which shows that the BHL in summer is twice that of the winter season. Also three subjects showed the BHL of 101.73-121.09 d, which reveals that organically bound tritium is present with low tritium uptake also. The BHL of tritium for all age group of workers is observed independent of age and is shorter during April to May. The distribution of cumulative probability vs. BHL of tritium shows lognormal distribution with a geometric mean of 9.11 d and geometric standard deviation of 1.77 d. The study of the subjects is fit for two-compartment model and also an average BHL of tritium is found similar to earlier studies.

  19. Sample preparation for quantitation of tritium by accelerator mass spectrometry.

    Science.gov (United States)

    Chiarappa-Zucca, Marina L; Dingley, Karen H; Roberts, Mark L; Velsko, Carol A; Love, Adam H

    2002-12-15

    The capability to prepare samples accurately and reproducibly for analysis of tritium (3H) content by accelerator mass spectrometry (AMS) greatly facilitates isotopic tracer studies in which attomole levels of 3H can be measured in milligram-sized samples. A method has been developed to convert the hydrogen of organic samples to a solid, titanium hydride, which can be analyzed by AMS. Using a two-step process, the sample is first oxidized to carbon dioxide and water. In the second step, the water is transferred within a heated manifold into a quartz tube, reduced to hydrogen gas using zinc, and reacted with titanium powder. The 3H/1H ratio of the titanium hydride is measured by AMS and normalized to standards whose ratios were determined by decay counting to calculate the amount of 3H in the original sample. Water, organic compounds, and biological samples with 3H activities measured by liquid scintillation counting were utilized to develop and validate the method. The 3H/1H ratios were quantified in samples that spanned 5 orders of magnitude, from 10(-10) to 10(-15), with a detection limit of 3.0 x 10(-15), which is equivalent to 0.02 dpm tritium/mg of material. Samples smaller than 2 mg were analyzed following addition of 2 mg of a tritium-free-hydrogen carrier. Preparation of organic standards containing both 14C and 3H in 2-mg organic samples demonstrated that this sample preparation methodology can also be applied to quantify both of these isotopes from a single sample.

  20. Diagnosing radiative shocks from deuterium and tritium implosions on NIF.

    Science.gov (United States)

    Pak, A; Divol, L; Weber, S; Döppner, T; Kyrala, G A; Kilne, J; Izumi, N; Glenn, S; Ma, T; Town, R P; Bradley, D K; Glenzer, S H

    2012-10-01

    During the recent ignition tuning campaign at the National Ignition Facility, layered cryogenic deuterium and tritium capsules were imploded via x-ray driven ablation. The hardened gated x-ray imager diagnostic temporally and spatially resolves the x-ray emission from the core of the capsule implosion at energies above ~8 keV. On multiple implosions, ~200-400 ps after peak compression a spherically expanding radiative shock has been observed. This paper describes the methods used to characterize the radial profile and rate of expansion of the shock induced x-ray emission.

  1. Impurity and trace tritium transport in tokamak edge turbulence

    DEFF Research Database (Denmark)

    Naulin, V.

    2005-01-01

    The turbulent transport of impurity or minority species, as for example tritium, is investigated in drift-Alfven edge turbulence. The full effects of perpendicular and parallel convection are kept for the impurity species. The impurity density develops a granular structure with steep gradients...... and locally exceeds its initial values due to the compressibility of the flow. An approximate decomposition of the impurity flux into a diffusive part and an effective convective part (characterized by a pinch velocity) is performed and a net inward pinch effect is recovered. The pinch velocity is explained...

  2. An improved method for preparing tritium labeled fluoxetine

    Energy Technology Data Exchange (ETDEWEB)

    Hsi, R.S.P.; Stolle, W.T. [Pharmacia and Upjohn Inc., Kalamazoo, MI (United States)

    1996-12-01

    Palladium-on-charcoal catalyzed reduction of N-methyl-3-(3-bromo) phenyl-3-(4-trifluoromethyl)phenoxypropylamine (1) with tritium gas produces a mixture of the debrominated product [{sup 3}H]fluoxetine (2) and N-methyl-3-[3-{sup 3}H]phenylpropylamine (3), which results from cleavage of the benzylic carbon-oxygen bond. Carrying out this reaction in the presence of pyridine eliminates hydrogenolysis and produces [{sup 3}H]fluoxetine as the sole product. (author).

  3. Tritium research laboratory cleanup and transition project final report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A.J.

    1997-02-01

    This Tritium Research Laboratory Cleanup and Transition Project Final Report provides a high-level summary of this project`s multidimensional accomplishments. Throughout this report references are provided for in-depth information concerning the various topical areas. Project related records also offer solutions to many of the technical and or administrative challenges that such a cleanup effort requires. These documents and the experience obtained during this effort are valuable resources to the DOE, which has more than 1200 other process contaminated facilities awaiting cleanup and reapplication or demolition.

  4. Sandia, California Tritium Research Laboratory transition and reutilization project

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, T.B. [Sandia National Lab., Albuquerque, NM (United States)

    1997-02-01

    This paper describes a project within Sandia National Laboratory to convert the shut down Tritium Research Laboratory into a facility which could be reused within the laboratory complex. In the process of decommissioning and decontaminating the facility, the laboratory was able to save substantial financial resources by transferring much existing equipment to other DOE facilities, and then expeditiously implementing a decontamination program which has resulted in the building being converted into laboratory space for new lab programs. This project of facility reuse has been a significant financial benefit to the laboratory.

  5. Near real-time analysis of tritium in treated water

    Energy Technology Data Exchange (ETDEWEB)

    Skibo, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-09-27

    The Tokyo Electric Power Company (TEPCO) is managing large quantities of treated water at the Fukushima Daiichi Nuclear Power Station. Moving forward, TEPCO will be discharging from the site clean water that meets agreed criteria. As part of agreements with stakeholders, TEPCO is planning to carefully monitor the water prior to discharge to assure compliance. The objective of this proposal is to support implementation of an on-line “real-time” (continuous or semi-continuous) tritium monitor that will reliably measure levels down to the agreed target 1500 Becquerels per liter (Bq/L).

  6. Hyperfine structure of S-states of muonic tritium

    Directory of Open Access Journals (Sweden)

    Martynenko F.A.

    2017-01-01

    Full Text Available On the basis of quasipotential method in quantum electrodynamics we carry out a precise calculation of hyperfine splitting of S-states in muonic tritium. The one-loop and two-loop vacuum polarization corrections, relativistic effects, nuclear structure corrections in first and second orders of perturbation theory are taken into account. The contributions to hyperfine structure are obtained in integral form and calculated analytically and numerically. Obtained results for hyperfine splitting can be used for a comparison with future experimental data of CREMA collaboration.

  7. Stability of Global Alfven Waves (Tae, Eae) in Jet Tritium Discharges

    NARCIS (Netherlands)

    Kerner, W.; Borba, D.; Huysmans, G. T. A.; Porcelli, F.; Poedts, S.; Goedbloed, J. P.; Betti, R.

    1994-01-01

    The interaction of alpha-particles in JET tritium discharges with global Alfven waves via inverse Landau damping is analysed. It is found that alpha-particle driven eigenmodes were stable in the PTE1 and should also be stable in a future 50:50 deuterium-tritium mix discharge aiming at Q(DT) = 1,

  8. A Sample Calculation of Tritium Production and Distribution at VHTR by using TRITGO Code

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ik Kyu; Kim, D. H.; Lee, W. J

    2007-03-15

    TRITGO code was developed for estimating the tritium production and distribution of high temperature gas cooled reactor(HTGR), especially GTMHR350 by General Atomics. In this study, the tritium production and distribution of NHDD was analyzed by using TRITGO Code. The TRITGO code was improved by a simple method to calculate the tritium amount in IS Loop. The improved TRITGO input for the sample calculation was prepared based on GTMHR600 because the NHDD has been designed referring GTMHR600. The GTMHR350 input with related to the tritium distribution was directly used. The calculated tritium activity among the hydrogen produced in IS-Loop is 0.56 Bq/g- H2. This is a very satisfying result considering that the limited tritium activity of Japanese Regulation Guide is 5.6 Bq/g-H2. The basic system to analyze the tritium production and the distribution by using TRITGO was successfully constructed. However, there exists some uncertainties in tritium distribution models, the suggested method for IS-Loop, and the current input was not for NHDD but for GTMHR600. The qualitative analysis for the distribution model and the IS-Loop model and the quantitative analysis for the input should be done in the future.

  9. Advancement Of Tritium Powered Betavoltaic Battery Systems FY16 EOY Report

    Energy Technology Data Exchange (ETDEWEB)

    Staack, G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Gaillard, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hitchcock, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-10-12

    The goal of this work is to increase the power output of tritium-powered betavoltaic batteries and investigate the change in power output and film resistance in real-time during tritium loading of adsorbent films. To this end, several tritium-compatible test vessels with the capability of measuring both the resistivity of a tritium trapping film and the power output of a betavoltaic device in-situ have been designed and fabricated using four electrically insulated feedthroughs in tritium-compatible load cells. Energy conversion devices were received from Widetronix, a betavoltaic manufacturing firm based in Ithaca, NY. Thin films were deposited on the devices and capped with palladium to facilitate hydrogen loading. Gold contacts were then deposited on top of the films to allow resistivity measurements of the film during hydrogen loading. Finally, the chips were wire bonded and installed in the test cells. The cells were then baked-out under vacuum and leak checked at temperature to reduce the chances of tritium leaks during loading. Following the bake-out, IV curves were measured to verify no internal wires were compromised, and the cells were delivered to Tritium for loading. Tritium loading is anticipated in October, 2017.

  10. Tritium in Japanese precipitation following the March 2011 Fukushima Daiichi Nuclear Plant Accident

    Science.gov (United States)

    Matsumoto, Takuya; Maruoka, Teruyuki; Shimoda, Gen; Obata, Hajime; Kagi, Hiroyuki; Suzuki, Katsuhiko; Yamamoto, Koshi; Mitsuguchi, Takehiro; Hagino, Kyoko; Tomioka, Naotaka; Sambandam, Chinmaya; Brummer, Daniela; Klaus, Philipp Martin; Aggarwal, Pradeep

    2013-04-01

    We have measured the concentrations of tritium in Japanese precipitation samples collected after the March 2011 accident at the Fukushima Dai-ichi Nuclear Power Plant (FNPP1). Tritium concentrations exceeding the pre-accident background level were detected at three out of seven localities (Tsukuba, Kashiwa and Hongo) southwest of the FNPP1, with their distances varying between 170 and 220 km from the source. The highest tritium content was found in the first rainfall in Tsukuba after the accident, but its tritium content was about 500 times less than the regulatory limit for tritium in drinking water, so that the risk of radiation from tritium released in the accident can be considered negligible. Tritium levels at the localities studied here decreased steadily and rapidly with time and became indistinguishable from the pre-accident values within five weeks. The atmospheric tritium level in the vicinity of the FNPP1 during the earliest stage of the accident was roughly estimated to be 1.5 × 103 Bq/m3, which is potentially capable of producing rainwater exceeding the regulatory limit, but only in the immediate vicinity of the source.

  11. Modeling tritium behavior in Li{sub 2}ZrO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Billone, M.C. [Argonne National Lab., IL (United States). Fusion Power Program

    1998-03-01

    Lithium metazirconate (Li{sub 2}ZrO{sub 3}) is a promising tritium breeder material for fusion reactors because of its excellent tritium release characteristics. In particular, for water-cooled breeding blankets (e.g., ITER), Li{sub 2}ZrO{sub 3} is appealing from a design perspective because of its good tritium release at low operating temperatures. The steady-state and transient tritium release/retention database for Li{sub 2}ZrO{sub 3} is reviewed, along with conventional diffusion and first-order surface desorption models which have been used to match the database. A first-order surface desorption model is recommended in the current work both for best-estimate and conservative (i.e., inventory upper-bound) predictions. Model parameters are determined and validated for both types of predictions, although emphasis is placed on conservative design predictions. The effects on tritium retention of ceramic microstructure, protium partial pressure in the purge gas and purge gas flow rate are discussed, along with other mechanisms for tritium retention which may not be dominant in the experiments, but may be important in blanket design analyses. The proposed tritium retention/release model can be incorporated into a transient thermal performance code to enable whole-blanket predictions of tritium retention/release during cyclic reactor operation. Parameters for the ITER driver breeding blanket are used to generate a numerical set of model predictions for steady-state operation. (author)

  12. Tritium operating safety seminar, Los Alamos, New Mexico, July 30, 1975

    Energy Technology Data Exchange (ETDEWEB)

    1976-03-01

    A seminar for the exchange of information on tritium operating and safety problems was held at the Los Alamos Scientific Laboratory. The topics discussed are: (1) material use (tubing, lubricants, valves, seals, etc.); (2) hardware selection (valves, fittings, pumps, etc.); (3) biological effects; (4) high pressure; (5) operating procedures (high pressure tritium experiment at LLL); (6) incidents; and (7) emergency planning. (TFD)

  13. Analysis of simulated data for the KArlsruhe TRItium Neutrino experiment using Bayesian inference

    DEFF Research Database (Denmark)

    Riis, Anna Sejersen; Hannestad, Steen; Weinheimer, C.

    2011-01-01

    The KATRIN (Karlsruhe Tritium Neutrino) experiment will analyze the tritium β spectrum to determine the mass of the neutrino with a sensitivity of 0.2 eV (90% C.L.). This approach to a measurement of the absolute value of the neutrino mass relies only on the principle of energy conservation and can...

  14. Transfer of tritium released into the marine environment by French nuclear facilities bordering the English Channel.

    Science.gov (United States)

    Fiévet, Bruno; Pommier, Julien; Voiseux, Claire; Bailly du Bois, Pascal; Laguionie, Philippe; Cossonnet, Catherine; Solier, Luc

    2013-06-18

    Controlled amounts of liquid tritium are discharged as tritiated water (HTO) by the nuclear industry into the English Channel. Because the isotopic discrimination between 3H and H is small, organically bound tritium (OBT) and HTO should show the same T/H ratio under steady-state conditions. We report data collected from the environment in the English Channel. Tritium concentrations measured in seawater HTO, as well as in biota HTO and OBT, confirm that tritium transfers from HTO to OBT result in conservation of the T/H ratio (ca. 1 × 10(-16)). The kinetics of the turnover of tritium between seawater HTO, biota HTO, and OBT was investigated. HTO in two algae and a mollusk is shown to exchange rapidly with seawater HTO. However, the overall tritium turnover between HTO and the whole-organism OBT is a slow process with a tritium biological half-life on the order of months. Nonsteady-state conditions exist where there are sharp changes in seawater HTO. As a consequence, for kinetic reasons, the T/H ratio in OBT may deviate transiently from that observed in HTO of samples from the marine ecosystem. Dynamic modeling is thus more realistic for predicting tritium transfers to biota OBT under nonsteady-state conditions.

  15. Preparations for deuterium--tritium experiments on the Tokamak Fusion Test Reactor*

    Energy Technology Data Exchange (ETDEWEB)

    Hawryluk, R.J.; Adler, H.; Alling, P.; Ancher, C.; Anderson, H.; Anderson, J.L.; Anderson, J.W.; Arunasalam, V.; Ascione, G.; Aschroft, D.; Barnes, C.W.; Barnes, G.; Batchelor, D.B.; Bateman, G.; Batha, S.; Baylor, L.A.; Beer, M.; Bell, M.G.; Biglow, T.S.; Bitter, M.; Blanchard, W.; Bonoli, P.; Bretz, N.L.; Brunkhorst, C.; Budny, R.; Burgess, T.; Bush, H.; Bush, C.E.; Camp, R.; Caorlin, M.; Carnevale, H.; Chang, Z.; Chen, L.; Cheng, C.Z.; Chrzanowski, J.; Collazo, I.; Collins, J.; Coward, G.; Cowley, S.; Cropper, M.; Darrow, D.S.; Daugert, R.; DeLooper, J.; Duong, H.; Dudek, L.; Durst, R.; Efthimion, P.C.; Ernst, D.; Faunce, J.; Fonck, R.J.; Fredd, E.; Fredrickson, E.; Fromm, N.; Fu, G.Y.; Furth, H.P.; Garzotto, V.; Gentile, C.; Gettelfinger, G.; Gilbert, J.; Gioia, J.; Goldfinger, R.C.; Golian, T.; Gorelenkov, N.; Gouge, M.J.; Grek, B.; Grisham, L.R.; Hammett, G.; Hanson, G.R.; Heidbrink, W.; Hermann, H.W.; Hill, K.W.; Hirshman, S.; Hoffman, D.J.; Hosea, J.; Hulse, R.A.; Hsuan, H.; Ja

    1994-05-01

    The final hardware modifications for tritium operation have been completed for the Tokamak Fusion Test Reactor (TFTR) [Fusion Technol. [bold 21], 1324 (1992)]. These activities include preparation of the tritium gas handling system, installation of additional neutron shielding, conversion of the toroidal field coil cooling system from water to a Fluorinert[sup TM] system, modification of the vacuum system to handle tritium, preparation, and testing of the neutral beam system for tritium operation and a final deuterium--deuterium (D--D) run to simulate expected deuterium--tritium (D--T) operation. Testing of the tritium system with low concentration tritium has successfully begun. Simulation of trace and high power D--T experiments using D--D have been performed. The physics objectives of D--T operation are production of [approx]10 MW of fusion power, evaluation of confinement, and heating in deuterium--tritium plasmas, evaluation of [alpha]-particle heating of electrons, and collective effects driven by alpha particles and testing of diagnostics for confined [alpha] particles. Experimental results and theoretical modeling in support of the D--T experiments are reviewed.

  16. Proceedings of 2nd Internaitonal workshop on tritium effects in plasma facing components

    Energy Technology Data Exchange (ETDEWEB)

    Morita, Kenji [Nagoya Univ. (Japan). School of Engineering; Noda, Nobuaki [eds.

    1994-08-01

    This workshop was held at Nagoya University on May 19 and 20, 1994. Approximately 1/3 of the lectures discussed the migration and retention of tritium in graphite and the other forms of carbon. As to this topic, most of the different aspects of the tritium reactions with carbon were generally agreed on. At the temperature lower than 800 K, tritium plasma interacts with graphite by forming a saturated layer on the surface, by forming a codeposited layer of sputtered carbon and tritium, and by allowing tritium diffusion through Pores. At the temperature higher than 800 K, the principal reaction of tritium with carbon is intergranular diffusion with high energy trapping. Because beryllium is the reference plasma-facing material for the ITER, several presentations on the reactions of tritium with beryllium were made. Also the tritium permeation through other metals was the topics. The results of TFTR D-T experiment were reported in the first talk. In this book, the gists of these lectures are collected. (K.I.).

  17. Detection of atmospheric tritium by scintillation. Variations in its concentration in France; Detection du tritium atmospherique par scintillation. Evolution de sa concentration en France

    Energy Technology Data Exchange (ETDEWEB)

    Bibron, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-06-01

    The tritium released into the atmosphere as a result of the explosion of thermonuclear devices is a useful radioactive tracer for the study of certain geophysical problems. The low concentrations found however call for the use of extremely sensitive detectors. Two detection methods using liquid scintillators are described. In the first method, the sample is introduced into the scintillator in liquid form, after prior concentration of the tritium by electrolysis. In the second method the tritium is incorporated into the scintillator solvent molecule by chemical synthesis. In the last part of the report are examined the variations in the tritium concentration in rain-water and of the free hydrogen in the air in France. A discussion is then made of the seasonal variations in the case of rain-water and these are compared to the variations in the strontium-90 concentrations. (author) [French] Le tritium introduit dans l'atmosphere par les explosions d'armes thermonucleaires est un traceur radioactif Interessant pour l'etude de certains problemes de geophysique. Les faibles concentrations rencontrees obligent toutefois a utiliser des detecteurs extremement sensibles. On decrit deux methodes de detection utilisant des scintillateurs liquides. Dans la premiere methode, l'echantillon est introduit dans le scintillateur, sous forme aqueuse, apres une concentration prealable du tritium par electrolyse. Dans la seconde methode, le tritium est incorpore a la molecule du solvant du scintillateur par synthese chimique. Dans la derniere partie du rapport, on examine l'evolution de la concentration du tritium dans les eaux de precipitation et l'hydrogene libre de l'air en France. On discute ensuite les variations saisonnieres dans le cas des eaux de precipitation et on les compare aux variations du strontium 90. (auteur)

  18. Levels of tritium in soils and vegetation near Canadian nuclear facilities releasing tritium to the atmosphere: implications for environmental models.

    Science.gov (United States)

    Thompson, P A; Kwamena, N-O A; Ilin, M; Wilk, M; Clark, I D

    2015-02-01

    Concentrations of organically bound tritium (OBT) and tritiated water (HTO) were measured over two growing seasons in vegetation and soil samples obtained in the vicinity of four nuclear facilities and two background locations in Canada. At the background locations, with few exceptions, OBT concentrations were higher than HTO concentrations: OBT/HTO ratios in vegetation varied between 0.3 and 20 and values in soil varied between 2.7 and 15. In the vicinity of the four nuclear facilities OBT/HTO ratios in vegetation and soils deviated from the expected mean value of 0.7, which is used as a default value in environmental transfer models. Ratios of the OBT activity concentration in plants ([OBT]plant) to the OBT activity concentration in soils ([OBT]soil) appear to be a good indicator of the long-term behaviour of tritium in soil and vegetation. In general, OBT activity concentrations in soils were nearly equal to OBT activity concentrations in plants in the vicinity of the two nuclear power plants. [OBT]plant/[OBT]soil ratios considerably below unity observed at one nuclear processing facility represents historically higher levels of tritium in the environment. The results of our study reflect the dynamic nature of HTO retention and OBT formation in vegetation and soil during the growing season. Our data support the mounting evidence suggesting that some parameters used in environmental transfer models approved for regulatory assessments should be revisited to better account for the behavior of HTO and OBT in the environment and to ensure that modelled estimates (e.g., plant OBT) are appropriately conservative. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

  19. Quantification of exchangeable and non-exchangeable organically bound tritium (OBT) in vegetation.

    Science.gov (United States)

    Kim, S B; Korolevych, V

    2013-04-01

    The objective of this study is to quantify the relative amounts of exchangeable organically bound tritium (OBT) and non-exchangeable OBT in various vegetables. A garden plot at Perch Lake, where tritium levels are slightly elevated due to releases of tritium from a nearby nuclear waste management area and Chalk River Laboratories (CRL) operations, was used to cultivate a variety of vegetables. Five different kinds of vegetables (lettuce, cabbage, tomato, radish and beet) were studied. Exchangeable OBT behaves like tritium in tissue free water in living organisms and, based on past measurements, accounts for about 20% of the total tritium in dehydrated organic materials. In this study, the percentage of the exchangeable OBT was determined to range from 20% to 57% and was found to depend on the type of vegetables as well as the sequence of the plants exposure to HTO. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  20. The valley system of the Jihlava river and Mohelno reservoir with enhanced tritium activities.

    Science.gov (United States)

    Simek, P; Kořínková, T; Svetlik, I; Povinec, P P; Fejgl, M; Malátová, I; Tomaskova, L; Stepan, V

    2017-01-01

    The Dukovany nuclear power plant (NPP Dukovany) releases liquid effluents, including HTO, to the Mohelno reservoir, located in a deep valley. Significantly enhanced tritium activities were observed in the form of non-exchangeable organically bound tritium in the surrounding biota which lacks direct contact with the water body. This indicates a tritium uptake by plants from air moisture and haze, which is, besides the uptake by roots from soil, one of the most important mechanisms of tritium transfer from environment to plants. Results of a pilot study based on four sampling campaigns in 2011-2015 are presented and discussed, with the aim to provide new information on tritium transport in the Mohelno reservoir - Jihlava River - plants ecosystems. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. ACUTRI a computer code for assessing doses to the general public due to acute tritium releases

    CERN Document Server

    Yokoyama, S; Noguchi, H; Ryufuku, S; Sasaki, T

    2002-01-01

    Tritium, which is used as a fuel of a D-T burning fusion reactor, is the most important radionuclide for the safety assessment of a nuclear fusion experimental reactor such as ITER. Thus, a computer code, ACUTRI, which calculates the radiological impact of tritium released accidentally to the atmosphere, has been developed, aiming to be of use in a discussion of licensing of a fusion experimental reactor and an environmental safety evaluation method in Japan. ACUTRI calculates an individual tritium dose based on transfer models specific to tritium in the environment and ICRP dose models. In this calculation it is also possible to analyze statistically on meteorology in the same way as a conventional dose assessment method according to the meteorological guide of the Nuclear Safety Commission of Japan. A Gaussian plume model is used for calculating the atmospheric dispersion of tritium gas (HT) and/or tritiated water (HTO). The environmental pathway model in ACUTRI considers the following internal exposures: i...

  2. 10 CFR 32.22 - Self-luminous products containing tritium, krypton-85 or promethium-147: Requirements for license...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Self-luminous products containing tritium, krypton-85 or... containing tritium, krypton-85 or promethium-147: Requirements for license to manufacture, process, produce... self-luminous products containing tritium, krypton-85, or promethium-147, or to initially transfer such...

  3. Contamination mechanisms of air basin with tritium in venues of underground nuclear explosions at the former Semipalatinsk test site.

    Science.gov (United States)

    Lyakhova, O N; Lukashenko, S N; Larionova, N V; Tur, Y S

    2012-11-01

    During the period of testing from 1945 to 1962 at the territory of Semipalatinsk test site (STS) within the Degelen Mountains in tunnels, 209 underground nuclear explosions were produced. Many of the tunnels have seasonal water seepage in the form of streams, through which tritium migrates from the underground nuclear explosion (UNE) venues towards the surface. The issue of tritium contamination occupies a special place in the radioactive contamination of the environment. In this paper we assess the level and distribution of tritium in the atmospheric air of ecosystems with water seepage at tunnels № 176 and № 177, located on "Degelen" site. There has been presented general nature of tritium distribution in the atmosphere relative to surface of a watercourse which has been contaminated with tritium. The basic mechanisms were studied for tritium distribution in the air of studied ecosystems, namely, the distribution of tritium in the systems: water-atmosphere, tunnel air-atmosphere, soil water-atmosphere, vegetation-atmosphere. An analytical calculation of tritium concentration in the atmosphere by the concentration of tritium in water has been performed. There has experimentally obtained the dependence for predictive assessment of tritium concentrations in air as a function of tritium concentration in one of the inlet sources such as water, tunnel air, soil water, vegetation, etc.. The paper also describes the general nature of tritium distribution in the air in the area "Degelen". Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Derived Intervention Levels for Tritium Based on Food and Drug Administration Methodology Using ICRP 56 Dose Coefficients

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, A

    1999-06-09

    In 1998, the FDA released its recommendations for age-dependent derived intervention levels for several radionuclides involved in nuclear accidents. One radionuclide that is not included in that document is tritium. Therefore an analysis is presented here using dose coefficients from ICRP 56 to develop Derived Intervention Levels (DILs) for tritium in two forms: water (HTO) and organically bound tritium (OBT).

  5. 2017 Accomplishments – Tritium Aging Studies on Stainless Steel Weldments and Heat-Affected Zones

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Michael J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hitchcock, Dale [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Krentz, Tim [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McNamara, Joy [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Duncan, Andrew [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2018-01-31

    In this study, the combined effects tritium and decay helium in forged and welded Types 304L and 21-6-9 stainless steels were studied. To measure these effects, fracture mechanic specimens were thermally precharged with tritium and aged for approximately 17 years to build in decay helium from tritium decay prior to testing. The results are compared to earlier measurements on the same alloys and weldments (4-5, 8-9). In support of Enhanced Surveillance, “Tritium Effects on Materials”, the fracture toughness properties of long-aged tritium-charged stainless-steel base metals and weldments were measured and compared to earlier measurements. The fracture-toughness data were measured by thermally precharging as-forged and as-welded specimens with tritium gas at 34.5 MPa and 350°C and aging for approximately 17 years to build-in decay helium prior to testing. These data result from the longest aged specimens ever tested in the history of the tritium effects programs at Savannah River and the fracture toughness values measured were the lowest ever recorded for tritium-exposed stainless steel. For Type 21-6-9 stainless steel, fracture toughness values were reduced to less than 2-4% of the as-forged values to 41 lbs / in specimens that contained more than 1300 appm helium from tritium decay. The fracture toughness properties of long-aged weldments were also measured. The fracture toughness reductions were not as severe because the specimens did not retain as much tritium from the charging and aging as did the base metals. For Type 304L weldments, the specimens in this study contained approximately 600 appm helium and their fracture toughness values averaged 750 lbs / in. The results for other steels and weldments are reported and additional tests will be conducted during FY18.

  6. An alternative approach to tritium-in-water monitoring

    CERN Document Server

    Kherani, N P

    2002-01-01

    A paradigm shift in the approach to tritium-in-water monitoring is considered and its viability demonstrated through a series of proof-of-principle experiments. The fundamental difference in the proposed detection system consists of changing the state of the tritiated water from the liquid phase to the gas phase and subsequently using any one of a variety of detection methods to detect tritium in the water vapour. Proof-of-principle experiments using an un-optimized heated ionization chamber illustrate the viability of the proposed method. Operation of the experiment as a continuous in-line detection system shows a detection limit of approx 20 mu Ci/l, a detection time constant of 10 s, and simplicity and effectiveness of the overall system. It is projected that an optimized heated ionization chamber system using state-of-the-art current measuring circuitry, could yield a detection limit of approx 0.2 mu Ci/l. Furthermore, application of a more sensitive detection system (for example, the gas electron multipl...

  7. EFFECTS OF TRITIUM GAS EXPOSURE ON ELECTRICALLY CONDUCTING POLYMERS

    Energy Technology Data Exchange (ETDEWEB)

    Kane, M.; Clark, E.; Lascola, R.

    2009-12-16

    Effects of beta (tritium) and gamma irradiation on the surface electrical conductivity of two types of conducting polymer films are documented to determine their potential use as a sensing and surveillance device for the tritium facility. It was shown that surface conductivity was significantly reduced by irradiation with both gamma and tritium gas. In order to compare the results from the two radiation sources, an approximate dose equivalence was calculated. The materials were also sensitive to small radiation doses (<10{sup 5} rad), showing that there is a measurable response to relatively small total doses of tritium gas. Spectroscopy was also used to confirm the mechanism by which this sensing device would operate in order to calibrate this sensor for potential use. It was determined that one material (polyaniline) was very sensitive to oxidation while the other material (PEDOT-PSS) was not. However, polyaniline provided the best response as a sensing material, and it is suggested that an oxygen-impermeable, radiation-transparent coating be applied to this material for future device prototype fabrication. A great deal of interest has developed in recent years in the area of conducting polymers due to the high levels of conductivity that can be achieved, some comparable to that of metals [Gerard 2002]. Additionally, the desirable physical and chemical properties of a polymer are retained and can be exploited for various applications, including light emitting diodes (LED), anti-static packaging, electronic coatings, and sensors. The electron transfer mechanism is generally accepted as one of electron 'hopping' through delocalized electrons in the conjugated backbone, although other mechanisms have been proposed based on the type of polymer and dopant [Inzelt 2000, Gerard 2002]. The conducting polymer polyaniline (PANi) is of particular interest because there are extensive studies on the modulation of the conductivity by changing either the oxidation

  8. Preparation of alveolate hydrophobic catalyst for tritium waste gas treatment

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yong; Peng, Shuming, E-mail: yy567@sina.com; Wang, Heyi; Du, Yang; Li, Jiamao

    2016-12-15

    Highlights: • The catalyst is hydrophobic, it will not be poisoned by steam in room air at room temperature which is better than Pt-Al{sub 2}O{sub 3}. • At room temperature, the conversion of low concentration of H2 and tritium gas in room air over the catalyst is high. • The air resistance of catalyst is much lower than graininess Pt-Al{sub 2}O{sub 3}. • It is inorganic and will not burn. - Abstract: To prepare a catalyst for the detritiation of waste gases at high flow rates, a heat-resistant hydrophobic zeolitic molecular sieve coating was synthesized on the surface of alveolate cordierite by hydrothermal processing. The alveolate hydrophobic catalyst prepared from the support was essentially waterproof and not easily poisoned by moisture. At room temperature, the conversion of low concentrations of H{sub 2} in humid air over the catalyst was higher than 95% at different space velocities (0–16,000 h{sup −1}) and different relative humidities. The reaction rate constant of the oxidation of tritium over alveolate hydrophobic catalyst is 0.182 s{sup −1} at 293.3 K–293.7 K and 59%–60% RH, it is much higher than the catalyst of reference honeycomb catalyst.

  9. TRITOX: a multiple parameter evaluation of tritium toxicity

    Energy Technology Data Exchange (ETDEWEB)

    Carsten, A.L.

    1982-01-01

    The increased use of nuclear reactors for power generation will lead to the introduction of tritium into the environment. The need for assessing possible immediate and long-term effects of exposure to this tritium led to the development of a broad program directed towards evaluating the possible somatic and genetic effects of continuous exposure to tritiated water (HTO). Among the parameters measured are the genetic, cytogenetic, reproductive efficiency, growth, nonspecific lifetime shortening, bone marrow cellularity and stem cell content, relative biological effectiveness as compared to /sup 137/Cesium gamma exposure, and related biochemical and microdosimetric evaluations. These parameters have been evaluated on animals maintained on HTO at 10 to 100 times the maximum permissible concentration (0.03 - 3.0 ..mu..Ci/ml) for HTO. Dominant lethal mutations, chromosome aberrations in regenerating liver, increased sister chromatid exchanges in bone marrow and reduction in bone marrow stem cell content have been observed at the higher concentrations. The relative biological effectiveness for HTO ingestion as compared to external /sup 137/Cesium gamma exposures has been found to be between 1 and 2.

  10. Tritium and ignition target management at the National Ignition Facility.

    Science.gov (United States)

    Draggoo, Vaughn

    2013-06-01

    Isotopic mixtures of hydrogen constitute the basic fuel for fusion targets of the National Ignition Facility (NIF). A typical NIF fusion target shot requires approximately 0.5 mmoles of hydrogen gas and as much as 750 GBq (20 Ci) of 3H. Isotopic mix ratios are specified according to the experimental shot/test plan and the associated test objectives. The hydrogen isotopic concentrations, absolute amounts, gas purity, configuration of the target, and the physical configuration of the NIF facility are all parameters and conditions that must be managed to ensure the quality and safety of operations. An essential and key step in the preparation of an ignition target is the formation of a ~60 μm thick hydrogen "ice" layer on the inner surface of the target capsule. The Cryogenic Target Positioning System (Cryo-Tarpos) provides gas handling, cyro-cooling, x-ray imaging systems, and related instrumentation to control the volumes and temperatures of the multiphase (solid, liquid, and gas) hydrogen as the gas is condensed to liquid, admitted to the capsule, and frozen as a single spherical crystal of hydrogen in the capsule. The hydrogen fuel gas is prepared in discrete 1.7 cc aliquots in the LLNL Tritium Facility for each ignition shot. Post-shot hydrogen gas is recovered in the NIF Tritium Processing System (TPS). Gas handling systems, instrumentation and analytic equipment, material accounting information systems, and the shot planning systems must work together to ensure that operational and safety requirements are met.

  11. SHINE Tritium Nozzle Design: Activity 6, Task 1 Report

    Energy Technology Data Exchange (ETDEWEB)

    Okhuysen, Brett S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pulliam, Elias Noel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-05

    In FY14, we studied the qualitative and quantitative behavior of a SHINE/PNL tritium nozzle under varying operating conditions. The result is an understanding of the nozzle’s performance in terms of important flow features that manifest themselves under different parametric profiles. In FY15, we will consider nozzle design with a focus on nozzle geometry and integration. From FY14 work, we will understand how the SHINE/PNL nozzle behaves under different operating scenarios. The first task for FY15 is to evaluate the FY14 model as a predictor of the actual flow. Considering different geometries is more time-intensive than parameter studies, therefore we recommend considering any relevant flow features that were not included in the FY14 model. In the absence of experimental data, it is particularly important to consider any sources of heat in the domain or boundary conditions that may affect the flow and incorporate these into the simulation if they are significant. Additionally, any geometric features of the beamline segment should be added to the model such as the orifice plate. The FY14 model works with hydrogen. An improvement that can be made for FY15 is to develop CFD properties for tritium and incorporate those properties into the new models.

  12. Tritium Specific Adsorption Simulation Utilizing the OSPREY Model

    Energy Technology Data Exchange (ETDEWEB)

    Veronica Rutledge; Lawrence Tavlarides; Ronghong Lin; Austin Ladshaw

    2013-09-01

    During the processing of used nuclear fuel, volatile radionuclides will be discharged to the atmosphere if no recovery processes are in place to limit their release. The volatile radionuclides of concern are 3H, 14C, 85Kr, and 129I. Methods are being developed, via adsorption and absorption unit operations, to capture these radionuclides. It is necessary to model these unit operations to aid in the evaluation of technologies and in the future development of an advanced used nuclear fuel processing plant. A collaboration between Fuel Cycle Research and Development Offgas Sigma Team member INL and a NEUP grant including ORNL, Syracuse University, and Georgia Institute of Technology has been formed to develop off gas models and support off gas research. This report is discusses the development of a tritium specific adsorption model. Using the OSPREY model and integrating it with a fundamental level isotherm model developed under and experimental data provided by the NEUP grant, the tritium specific adsorption model was developed.

  13. Accelerator Production of Tritium project process waste assessment

    Energy Technology Data Exchange (ETDEWEB)

    Carson, S.D.; Peterson, P.K.

    1995-09-01

    DOE has made a commitment to compliance with all applicable environmental regulatory requirements. In this respect, it is important to consider and design all tritium supply alternatives so that they can comply with these requirements. The management of waste is an integral part of this activity and it is therefore necessary to estimate the quantities and specific wastes that will be generated by all tritium supply alternatives. A thorough assessment of waste streams includes waste characterization, quantification, and the identification of treatment and disposal options. The waste assessment for APT has been covered in two reports. The first report was a process waste assessment (PWA) that identified and quantified waste streams associated with both target designs and fulfilled the requirements of APT Work Breakdown Structure (WBS) Item 5.5.2.1. This second report is an expanded version of the first that includes all of the data of the first report, plus an assessment of treatment and disposal options for each waste stream identified in the initial report. The latter information was initially planned to be issued as a separate Waste Treatment and Disposal Options Assessment Report (WBS Item 5.5.2.2).

  14. Development and Verification of Tritium Analyses Code for a Very High Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chang H. Oh; Eung S. Kim

    2009-09-01

    A tritium permeation analyses code (TPAC) has been developed by Idaho National Laboratory for the purpose of analyzing tritium distributions in the VHTR systems including integrated hydrogen production systems. A MATLAB SIMULINK software package was used for development of the code. The TPAC is based on the mass balance equations of tritium-containing species and a various form of hydrogen (i.e., HT, H2, HTO, HTSO4, and TI) coupled with a variety of tritium source, sink, and permeation models. In the TPAC, ternary fission and neutron reactions with 6Li, 7Li 10B, 3He were taken into considerations as tritium sources. Purification and leakage models were implemented as main tritium sinks. Permeation of HT and H2 through pipes, vessels, and heat exchangers were importantly considered as main tritium transport paths. In addition, electroyzer and isotope exchange models were developed for analyzing hydrogen production systems including both high-temperature electrolysis and sulfur-iodine process. The TPAC has unlimited flexibility for the system configurations, and provides easy drag-and-drops for making models by adopting a graphical user interface. Verification of the code has been performed by comparisons with the analytical solutions and the experimental data based on the Peach Bottom reactor design. The preliminary results calculated with a former tritium analyses code, THYTAN which was developed in Japan and adopted by Japan Atomic Energy Agency were also compared with the TPAC solutions. This report contains descriptions of the basic tritium pathways, theory, simple user guide, verifications, sensitivity studies, sample cases, and code tutorials. Tritium behaviors in a very high temperature reactor/high temperature steam electrolysis system have been analyzed by the TPAC based on the reference indirect parallel configuration proposed by Oh et al. (2007). This analysis showed that only 0.4% of tritium released from the core is transferred to the product hydrogen

  15. 2016 Accomplishments. Tritium aging studies on stainless steel. Forging process effects on the fracture toughness properties of tritium-precharged stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Michael J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-01-01

    Forged austenitic stainless steels are used as the materials of construction for pressure vessels designed to contain tritium at high pressure. These steels are highly resistant to tritium-assisted fracture but their resistance can depend on the details of the forging microstructure. During FY16, the effects of forging strain rate and deformation temperature on the fracture toughness properties of tritium-exposed-and-aged Type 304L stainless steel were studied. Forgings were produced from a single heat of steel using four types of production forging equipment – hydraulic press, mechanical press, screw press, and high-energy-rate forging (HERF). Each machine imparted a different nominal strain rate during the deformation. The objective of the study was to characterize the J-Integral fracture toughness properties as a function of the industrial strain rate and temperature. The second objective was to measure the effects of tritium and decay helium on toughness. Tritium and decay helium effects were measured by thermally precharging the as-forged specimens with tritium gas at 34.5 MPa and 350°C and aging for up to five years at -80°C to build-in decay helium prior to testing. The results of this study show that the fracture toughness properties of the as-forged steels vary with forging strain rate and forging temperature. The effect is largely due to yield strength as the higher-strength forgings had the lower toughness values. For non-charged specimens, fracture toughness properties were improved by forging at 871°C versus 816°C and Screw-Press forgings tended to have lower fracture toughness values than the other forgings. Tritium exposures reduced the fracture toughness values remarkably to fracture toughness values averaging 10-20% of as-forged values. However, forging strain rate and temperature had little or no effect on the fracture toughness after tritium precharging and aging. The result was confirmed by fractography which indicated that fracture modes

  16. Environmental health-risk assessment for tritium releases at the National Tritium Labeling Facility at Lawrence Berkeley National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    McKone, T.E.; Brand, K.P. [Lawrence Livermore National Lab., CA (United States). Health and Ecological Assessment Div.; Shan, C. [Lawrence Berkeley National Lab., CA (United States). Earth Sciences Div.

    1997-04-01

    This risk assessment calculates the probability of experiencing health effects, including cancer incidence due to tritium exposure for three groups of people: (1) LBNL workers near the LBNL facility--Building 75--that uses tritium; (2) other workers at LBNL and nearby neighbors; and (3) people who use the UC Berkeley campus area, and some Berkeley residents. All of these groups share the same probability of health effects from the background radiation from natural sources in the Berkeley area environment, including an increased risk of developing a cancer of 11,000 chances per million. In calculating risk the authors assumed continuous operation in Building 75 for at least a human lifetime. Under this assumption, LBNL workers located near Building 75 have an additional risk of 60 chances out of one million to suffer a cancer; other workers at LBNL and people who live near LBNL have an additional risk of six chances out of one million over a lifetime of exposure; and users of the UC Berkeley campus area and other residents of Berkeley have an additional risk of less than once chance out of one million over a lifetime.

  17. EFFECTS OF TRITIUM EXPOSURE ON UHMW-PE, PTFE, AND VESPEL

    Energy Technology Data Exchange (ETDEWEB)

    Clark, E; Kirk Shanahan, K

    2006-05-31

    Samples of three polymers, Ultra-High Molecular Weight Polyethylene (UHMW-PE), polytetrafluoroethylene (PTFE, also known as Teflon{reg_sign}), and Vespel{reg_sign} polyimide were exposed to 1 atmosphere of tritium gas at ambient temperature for varying times up to 2.3 years in closed containers. Sample mass and size measurements (to calculate density), spectra-colorimetry, dynamic mechanical analysis (DMA), and Fourier-transform infrared spectroscopy (FT-IR) were employed to characterize the effects of tritium exposure on these samples. Changes of the tritium exposure gas itself were characterized at the end of exposure by measuring total pressure and by mass spectroscopic analysis of the gas composition. None of the polymers exhibited significant changes of density. The color of initially white UHMW-PE and PTFE dramatically darkened to the eye and the color also significantly changed as measured by colorimetry. The bulk of UHMW-PE darkened just like the external surfaces, however the fracture surface of PTFE appeared white compared to the PTFE external surfaces. The white interior could have been formed while the sample was breaking or could reflect the extra tritium dose at the surface directly from the gas. The dynamic mechanical response of UHMW-PE was typical of radiation effects on polymers- an initial stiffening (increased storage modulus) and reduction of viscous behavior after three months exposure, followed by lowering of the storage modulus after one year exposure and longer. The storage modulus of PTFE increased through about nine months tritium exposure, then the samples became too weak to handle or test using DMA. Characterization of Vespel{reg_sign} using DMA was problematic--sample-to-sample variations were significant and no systematic change with tritium exposure could be discerned. Isotopic exchange and incorporation of tritium into UHMW-PE (exchanging for protium) and into PTFE (exchanging for fluorine) was observed by FT-IR using an attenuated

  18. Tritium transport modeling at system level for the EUROfusion dual coolant lithium-lead breeding blanket

    Science.gov (United States)

    Urgorri, F. R.; Moreno, C.; Carella, E.; Rapisarda, D.; Fernández-Berceruelo, I.; Palermo, I.; Ibarra, A.

    2017-11-01

    The dual coolant lithium lead (DCLL) breeding blanket is one of the four breeder blanket concepts under consideration within the framework of EUROfusion consortium activities. The aim of this work is to develop a model that can dynamically track tritium concentrations and fluxes along each part of the DCLL blanket and the ancillary systems associated to it at any time. Because of tritium nature, the phenomena of diffusion, dissociation, recombination and solubilisation have been modeled in order to describe the interaction between the lead-lithium channels, the structural material, the flow channel inserts and the helium channels that are present in the breeding blanket. Results have been obtained for a pulsed generation scenario for DEMO. The tritium inventory in different parts of the blanket, the permeation rates from the breeder to the secondary coolant and the amount of tritium extracted from the lead-lithium loop have been computed. Results present an oscillating behavior around mean values. The obtained average permeation rate from the liquid metal to the helium is 1.66 mg h-1 while the mean tritium inventory in the whole system is 417 mg. Besides the reference case results, parametric studies of the lead-lithium mass flow rate, the tritium extraction efficiency and the tritium solubility in lead-lithium have been performed showing the reaction of the system to the variation of these parameters.

  19. Tritium as a Tracer for the Discrimination of Water Bodies in the German Bight

    Science.gov (United States)

    Meyerjürgens, Jens; Badewien, Thomas; Sültenfuß, Jürgen; Zielinski, Oliver

    2017-04-01

    Tritium (3H) in the atmosphere has declined to natural levels, after above ground nuclear weapon tests ended five decades ago. Currently tritium is present in the marine environment of the North Sea mainly due to liquid discharges from nuclear reprocessing plants (NRP) in La Hague (France) and Sellafield (UK) and different nuclear power plants (NPP) discharging their effluent to the English Channel or directly into the North Sea. This work deals with seawater samples collected in the German Bight in October 2014 onboard the research vessel Heincke that were analyzed for tritium activity concentration. The major research question of this study is the characterization of different water masses due to their tritium activity concentration. Tritium activity concentration in the coastal area is very high compared to samples taken in the central German Bight. Especially samples from the estuaries of the Elbe, Weser and Ems show high tritium activity concentrations. In correlation with salinity values, riverine freshwater masses were discriminated from oceanic influenced water masses. Activity concentrations from the coastal areas to the central bight are characterized by an exponentially decreasing gradient. It is shown that tritium can be utilized as a tracer for the discrimination of riverine freshwater from oceanic water masses.

  20. Electrochemical cells with Pd cathodes: Analysis of tritium and excess heat

    Energy Technology Data Exchange (ETDEWEB)

    Bertalot, L.; Bettinali, L.; De Marco, F.; Violante, V.; De Logu, P.; Dikonimos Makris, T.; La Barbera, A.

    1991-12-31

    The origin of excess heat developed during the electrolysis of heavy water in `cold fusion` cells is still open to question. The necessary presence of deuterium suggests that fusion reactions can be partially or totally responsible for the generation of excess heat. Experience has shown neutron emission to be sporadic and very weak; on the other hand, tritium was found in small but detectable amounts. If tritium accumulates in the solution, it can be comfortably measured post mortem. This paper reports on two relevant investigations. The first one, performed in Frascati, Italy had, as its main objective, the detection of excess tritium. Particular care was exerted to avoid any tritium and hydrogen contamination. Excess heat and tritium were to be measured in the second investigation which took place at the Texas A & M University (USA). Nine cells were set up in Frascati to detect tritium as the indicator of D-D fusion. No tritium above electrochemical isotopic enrichment was found. Three cells were set up at Appleby`s laboratory at TAMU. A commercial calorimeter was used to measure cell heat output. One cell gave excess power ranging between 12 and 20% (25-40 W/cubic centimeters) for about 10 days and produced about 57 kJ.

  1. TRITIUM AGING EFFECTS ON THE FRACTURE TOUGHNESS PROPERTIES OF FORGED STAINLESS STEEL

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, M

    2008-04-14

    The fracture toughness properties of Type 21-6-9 stainless steel were measured for forgings in the unexposed, hydrogen-exposed, and tritium-exposed-and-aged conditions. Fracture toughness samples were cut from conventionally-forged and high-energy-rate-forged forward-extruded cylinders and mechanically tested at room temperature using ASTM fracture-toughness testing procedures. Some of the samples were exposed to either hydrogen or tritium gas (340 MPa, 623 K) prior to testing. Tritium-exposed samples were aged for up to seven years and tested periodically in order to measure the effect on fracture toughness of {sup 3}He from radioactive tritium decay. The results show that hydrogen-exposed and tritium-exposed samples had lower fracture- toughness values than unexposed samples and that fracture toughness decreased with increasing decay {sup 3}He content. Forged steels were more resistant to the embrittling effects of tritium and decay {sup 3}He than annealed steels, although their fracture-toughness properties depended on the degree of sensitization that occurred during processing. The fracture process was dominated by microvoid nucleation, growth and coalescence; however, the size and spacing of microvoids on the fracture surfaces were affected by hydrogen and tritium with the lowest-toughness samples having the smallest microvoids and finest spacing.

  2. A Next Generation Digital Counting System For Low-Level Tritium Studies (Project Report)

    Energy Technology Data Exchange (ETDEWEB)

    Bowman, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-10-03

    Since the early seventies, SRNL has pioneered low-level tritium analysis using various nuclear counting technologies and techniques. Since 1999, SRNL has successfully performed routine low-level tritium analyses with counting systems based on digital signal processor (DSP) modules developed in the late 1990s. Each of these counting systems are complex, unique to SRNL, and fully dedicated to performing routine tritium analyses of low-level environmental samples. It is time to modernize these systems due to a variety of issues including (1) age, (2) lack of direct replacement electronics modules and (3) advances in digital signal processing and computer technology. There has been considerable development in many areas associated with the enterprise of performing low-level tritium analyses. The objective of this LDRD project was to design, build, and demonstrate a Next Generation Tritium Counting System (NGTCS), while not disrupting the routine low-level tritium analyses underway in the facility on the legacy counting systems. The work involved (1) developing a test bed for building and testing new counting system hardware that does not interfere with our routine analyses, (2) testing a new counting system based on a modern state of the art DSP module, and (3) evolving the low-level tritium counter design to reflect the state of the science.

  3. TRITIUM IN URINE OF PEOPLE LIVING IN THE AREA OF INFLUENCE OF THE BELOYARSKAYA NPP

    Directory of Open Access Journals (Sweden)

    M. Ya. Chebotina

    2016-01-01

    Full Text Available The goal of the research is to determine relationship between tritium concentration in the body fluid (urine of people living in the area of influence of the Beloyarskaya NPP and tritium concentration in drinking water.Materials and methods. Studed population (men and women. Urine samples were collected in the clinical laboratory of a medical unit in Zarechny town. There were 50 individuals in the studied group. Patients were different on age and weight. Water samples were collected in an arbitrary way, through the all study period, from October to November in 2015 year. Tritium concentrations were determined with the ultra-low level liquid scintillation spectrometer Quantulus-1220 (USA. The facility developed by L.G. Bondareva was used for tritium extraction. The method allowes to separate the template, which significantly effects determination of tritium.Results. The urine samples from people living in the area of influence of the Beloyarskaya NPP in Zarechny town were analyzed in the study. There was positive relationship between tritium concentration in drinking water and tritium concentration in urine. Statistically significant correlation between analyzed parameters was found (correlation coefficient 0.98; significance level 0,007. Individual doses were estimated according to Harrison, Khursheed, Lambert. The Doses vary from 0,32 to 1,12 with an allowance for consumption of drinking water 100 l y–1 (according to the consumption standard for the analyzed region, which amounts 0,032–0,12 % from dose limit for population (1 mSv y–1. It was determined what drinking water is the main source of the radionuclide in human body in this region. The determined values of tritium concentration in drinking water are significantly lower than the intervention level for tritium of 7600 Bq l–1 ( Radiation Safety Standards-99/2009, Appendix 2a.

  4. Laser-induced synthesis and decay of Tritium under exposure of solid targets in heavy water

    CERN Document Server

    Barmina, E V; Timashev, S F; Shafeev, G A

    2013-01-01

    The processes of laser-assisted synthesis of Tritium nuclei and their laser-induced decay in cold plasma in the vicinity of solid targets (Au, Ti, Se, etc.) immersed into heavy water are experimentally realized at peak laser intensity of 10E10-10E13 Watts per square centimeter. Initial stages of Tritium synthesis and their laser-induced beta-decay are interpreted on the basis of non-elastic interaction of plasma electrons having kinetic energy of 5-10 eV with nuclei of Deuterium and Tritium, respectively.

  5. Tritium/Helium-3 Apparent Ages of Shallow Ground Water, Portland Basin, Oregon, 1997-98

    Science.gov (United States)

    Hinkle, Stephen R.

    2009-01-01

    Water samples for tritium/helium-3 age dating were collected from 12 shallow monitoring wells in the Portland basin, Oregon, in 1997, and again in 1998. Robust tritium/helium-3 apparent (piston-flow) ages were obtained for water samples from 10 of the 12 wells; apparent ages ranged from 1.1 to 21.2 years. Method precision was demonstrated by close agreement between data collected in 1997 and 1998. Tritium/helium-3 apparent ages generally increase with increasing depth below the water table, and agree well with age/depth relations based on assumptions of effects of recharge rate on vertical ground-water movement.

  6. Atomic tritium as a surface nanoprobe in a structural investigation of molecular assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Badun, G.A.; Lukashina, E.V.; Batuk, O.N.; Ksenofontov, A.L.; Fedoseev, V.M

    2003-12-15

    Possibilities of atomic tritium application as surface nanoprobe for structural investigations of adsorption layers on the liquid-air interface have been demonstrated. Frozen aqueous solutions of a series of amino acids and their mixtures and one well-known surface-active substance (cetyltrimethylammonium bromide, CTAB) were exposed to bombardment by tritium atoms generated on hot tungsten wire in a special vacuum device. This procedure resulted in substitution of hydrogen atoms by radioactive tritium in the thin surface layer of investigated samples. Curves of radioactivity changes depending on bombardment time and solution concentration for applied compounds were obtained and analyzed.

  7. Design and testing of an advanced portable tritium getter bed

    Energy Technology Data Exchange (ETDEWEB)

    Schrader, K.H.; Perujo, A. [European Commission, Ispra (Italy)

    1995-10-01

    This paper presents the design and first tests of a portable uranium getter bed where the drawbacks of the standard available transport getters have been either mitigated or eliminated. The heating of the bed is made internally, ie, heating the uranium by a close contact of the heater element with the material, therefore reducing the temperature of the wall that is shielded from the heat source. Keeping the wall relatively cold reduces the tritium losses by permeation and the heat load to the glovebox. With this design the maximum operating temperature of the external wall is {approx}= 373 K; this corresponds to a nominal reduction in permeation of four orders of magnitude. 2 refs., 4 figs.

  8. Radiological Characterization and Final Facility Status Report Tritium Research Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, T.B.; Gorman, T.P.

    1996-08-01

    This document contains the specific radiological characterization information on Building 968, the Tritium Research Laboratory (TRL) Complex and Facility. We performed the characterization as outlined in its Radiological Characterization Plan. The Radiological Characterization and Final Facility Status Report (RC&FFSR) provides historic background information on each laboratory within the TRL complex as related to its original and present radiological condition. Along with the work outlined in the Radiological Characterization Plan (RCP), we performed a Radiological Soils Characterization, Radiological and Chemical Characterization of the Waste Water Hold-up System including all drains, and a Radiological Characterization of the Building 968 roof ventilation system. These characterizations will provide the basis for the Sandia National Laboratory, California (SNL/CA) Site Termination Survey .Plan, when appropriate.

  9. Commercial Light Water Reactor Tritium Extraction Facility Geotechnical Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, M R

    2000-01-11

    A geotechnical investigation program has been completed for the Circulating Light Water Reactor - Tritium Extraction Facility (CLWR-TEF) at the Savannah River Site (SRS). The program consisted of reviewing previous geotechnical and geologic data and reports, performing subsurface field exploration, field and laboratory testing and geologic and engineering analyses. The purpose of this investigation was to characterize the subsurface conditions for the CLWR-TEF in terms of subsurface stratigraphy and engineering properties for design and to perform selected engineering analyses. The objectives of the evaluation were to establish site-specific geologic conditions, obtain representative engineering properties of the subsurface and potential fill materials, evaluate the lateral and vertical extent of any soft zones encountered, and perform engineering analyses for slope stability, bearing capacity and settlement, and liquefaction potential. In addition, provide general recommendations for construction and earthwork.

  10. Tritium toxicity program in the Medical Department, Brookhaven National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Carsten, A.L.

    1983-01-01

    It is possible to detect somatic, cytogenetic and genetic effects resulting from exposures at 33 to 100 times the mpc's for tritiated water (HTO). The reduction in bone marrow cells in animals maintaining normal total cellularity demonstrate both the presence of an effect at the primitive cell level as well as the animal's ability to compensate for this effect by recruiting stem cells from the G/sub 0/ resting state. This evidence of damage together with the observed cytogenetic changes leads one to contemplate the possible importance of radiation exposures at these levels for the induction of leukemia or other blood dyscrasias. As predicted on the basis of established principles of radiobiology, exposure to tritium beta rays from HTO ingestion results in measureable effects on several animal systems.

  11. Tritium source-related systematic uncertainties of the KATRIN experiment

    Energy Technology Data Exchange (ETDEWEB)

    Seitz-Moskaliuk, Hendrik [Karlsruher Institut fuer Technologie, Institut fuer experimentelle Kernphysik, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Collaboration: KATRIN-Collaboration

    2016-07-01

    KATRIN will perform a direct, kinematics-based measurement of the neutrino mass with a sensitivity of 200 meV (90 % C. L.) reached after 3 years of measurement time. The neutrino mass is obtained by determining the shape of the spectrum of tritium β decay electrons close to the endpoint of 18.6 keV with a spectrometer of MAC-E filter type. To achieve the planned sensitivity, the systematic measurement uncertainties have to be carefully controlled and evaluated. Main sources of systematics are the MAC-E filter on the one hand and the source and transport section (STS) on the other hand. Most of the operational parameters of KATRIN have to be stable at or even below the per mille level and have to meet further strict requirements. This talk reviews the KATRIN systematics with a special focus on the STS. Early commissioning measurements to determine the main systematics are introduced.

  12. Preheating temperature effect on tritium retention in VPS-W

    Energy Technology Data Exchange (ETDEWEB)

    Sato, M.; Uchimura, H.; Toda, K.; Oya, Y.; Okuno, K. [Graduate School of Science, Shizuoka University, Suruga-Ku, Shizuoka (Japan); Tokunaga, T.; Watanabe, H.; Yoshida, N. [Research Institute for Applied Mechanics, Kyushu University, Kasuga-city, Fukuoka (Japan); Hatano, Y. [Hydrogen Isotope Research Center, University of Toyama, Toyama-city, Toyama (Japan); Kasada, R.; Kimura, A. [Institute of Advance Energy, Kyoto University, Gokasho, Uji, Kyoto (Japan); Nagasaka, T. [National Institute for Fusion Science, Toki-city, Gifu (Japan)

    2015-03-15

    The W coating by Vacuum Plasma Spraying (VPS) technology is thought to be reasonable for most plasma facing components in future fusion reactors. In this paper the deuterium retention behavior for the Vacuum Plasma Spraying (VPS) tungsten (W) coating has been studied to demonstrate the tritium retention as a function of heating temperature. It has been found that two major deuterium desorption stages were observed at the temperature regions of 400 - 700 K (Stage 1) and 900 - 1100 K (Stage 2), considering that Stage 1 has been linked to the desorption of deuterium trapped by near surface and intrinsic defects, and Stage 2 has been related to the desorption of deuterium bound to impurities as C-D bonds. By heating the sample above 673 K, the major peak of C-1s shifted from C-O bond to C-C bond, where the retention of deuterium as Stage 2 has increased. Therefore it indicates that the hydrogen isotope retention was controlled by the amount of C-C bond in VPS, most of which was contaminated during the VPS coating process. The comparison of several samples (VPS-W with shading, VPS-W without shading and Polycrystalline W (PCW)) shows that the carbon impurity has a large affinity with deuterium and makes stable trapping states compared to that with intrinsic defects and grain boundaries. However, most of them was reduced by heating at 1173 K. Therefore, heating treatment is quite important to get rid of carbon impurities and refrain higher tritium retention in VPS. (authors)

  13. Inventory of tritium concentration of waters in the Manche department; Inventaire des concentrations en tritium des eaux du Departement de La Manche

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    For the inventory of water tritium concentration in the Manche department, it is the complementarity that animated the work opened during year 2001. To answer to a commune sensitivity such water quality, particularly drinking water at tap, the A.C.R.O. laboratory brought its know how to make and its technical means in the area of tritium analysis and the general council brought its know how to make and its logistics means in matter of sanitary control. This collaboration has allowed to supply an indication on the tritium content of the distribution waters of thirty of the most important cities of the department. Then, it allowed to inform on the radiological situation (in relation with the tritium presence) of coast waters and principal rivers waters. More than 160 controls have been realised between the months of march 2001 and february 2002. Only the tritium under the shape of tritiated water has been measured. The measures have been made by liquid scintillation according to the regulatory agreement. (N.C.)

  14. Cataract removal

    Science.gov (United States)

    ... eye diseases and eye surgery. Adults are usually awake for the procedure. Numbing medicine (local anesthesia) is ... removed. Tips for recovering after cataract surgery: Wear dark sunglasses outside after you remove the patch. Wash ...

  15. Nevus Removal

    Science.gov (United States)

    ... find the answers you seek. What are the Negative Effects of Nevus Removal? Removal procedures are major ... Reunited Donor Challenge Met! Find Nevus Outreach on Facebook To New Parents of a Child With a ...

  16. Tritium Waste Treatment System component failure data analysis from June 18, 1984--December 31, 1989

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, L.C. (EG and G Idaho, Inc., Idaho Falls, ID (USA)); Stolpe Gavett, M.A. (Los Alamos National Lab., NM (USA))

    1990-09-01

    This document gives the failure rates for the major tritium-bearing components in the Tritium Waste Treatment System at the Tritium Systems Test Assembly, which is a fusion research and technology facility at the Los Alamos National Laboratory. The failure reports, component populations, and operating demands/hours are given in this report, and sample calculations for binomial demand failure rates and poisson hourly failure rates are given in the appendices. The failure rates for tritium-bearing components were on the order of the screening failure rate values suggested for fusion reliability and risk analyses. More effort should be directed toward collecting and analyzing fusion component failure data, since accurate failure rates are necessary to refine reliability and risk analyses. 15 refs., 4 figs., 4 tabs.

  17. Improvement of data processing of the tritium monitor installed at the HANARO stack

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Myong Seop; Seol, Chang Woo; Lee, Hyung Sub; Lee, Choong Sung; Park, Sang Jun; Hong, Kwong Pyo [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    Tritium, particle, iodine and noble gas detectors have been installed at the HANARO stack, and they are continuously being operated to monitor the abnormal emissions of the above radioactivities. The tritium concentration in the air from the reactor hall is the lower level than the reliably detectable activity concentrations by the monitor. Thus the measured tritium concentration has easily been affected by the detector backgrounds and the activity of ambient noble gas. Since it is impossible to increase the sensitivity of the monitor so far, we decided to improve the processing of the output data from the monitor. First of all, we analyzed all data from the monitor. And, we concluded that an improvement would be possible by using the data from the RMS (Regional Monitoring System) noble gas monitor. Thus, in this paper, the methodology for producing the reliable data from the stack tritium monitor is described.

  18. HT TCAP Loading Results for the Tritium Facility Modernization and Consolidation Project (S-7726)

    CERN Document Server

    Staack, G C

    2002-01-01

    Three production Thermal Cycling Absorption Process units were each loaded with approximately 18 kg Pd/K for the Tritium Facility Modernization and Consolidation project. This report details the results of the successful loading of the units.

  19. Calibration of a liquid scintillation counter to assess tritium levels in various samples

    CERN Document Server

    Al-Haddad, M N; Abu-Jarad, F A

    1999-01-01

    An LKB-Wallac 1217 Liquid Scintillation Counter (LSC) was calibrated with a newly adopted cocktail. The LSC was then used to measure tritium levels in various samples to assess the compliance of tritium levels with the recommended international levels. The counter was calibrated to measure both biological and operational samples for personnel and for an accelerator facility at KFUPM. The biological samples include the bioassay (urine), saliva, and nasal tests. The operational samples of the light ion linear accelerator include target cooling water, organic oil, fomblin oil, and smear samples. Sets of standards, which simulate various samples, were fabricated using traceable certified tritium standards. The efficiency of the counter was obtained for each sample. The typical range of the efficiencies varied from 33% for smear samples down to 1.5% for organic oil samples. A quenching curve for each sample is presented. The minimum detectable activity for each sample was established. Typical tritium levels in bio...

  20. TRITIUM-β-DECAY Experiments - the Direct way to the Absolute Neutrino Mass

    Science.gov (United States)

    Bornschein, Lutz

    2013-11-01

    Tritium-β-decay experiments provide the most sensitive approach to measure the absolute neutrino mass in a model independent way. The Karlsruhe Tritium Neutrino experiment KATRIN will measure the neutrino mass scale with an expected sensitivity of 0.2 eV/c2 (90% C.L.) and so will help to clarify the roles of neutrinos in the early universe. KATRIN investigates spectroscopically the electron spectrum from tritium β-decay 3 H -> 3 {He} + {e}^ - + bar ν e close to the kinematic endpoint of 18.6 keV. It will use a windowless gaseous tritium source in combination with an electrostatic filter for energy analysis. KATRIN is currently under construction at the Karlsruhe Institute of Technology (KIT) Campus North. This proceeding will give an overview of the status of the main components of the KATRIN experiment.

  1. Studying the spatial organization of membrane proteins by means of tritium stratigraphy: bacteriorhodopsin in purple membrane.

    Science.gov (United States)

    Shishkov, A V; Ksenofontov, A L; Bogacheva, E N; Kordyukova, L V; Badun, G A; Alekseevsky, A V; Tsetlin, V I; Baratova, L A

    2002-05-15

    The topography of bacteriorhodopsin (bR) in situ was earlier studied by using the tritium bombardment approach [Eur. J. Biochem. 178 (1988) 123]. Now, having the X-ray crystallography data of bR at atom resolution [Proc. Natl. Acad. Sci. 95 (1998) 11673], we estimated the influence of membrane environment (lipid and protein) on tritium incorporation into amino acid residues forming transmembrane helices. We have determined the tritium flux attenuation coefficients for residues 10-29 of helix A. They turned out to be low (0.04+/-0.02 A(-1)) for residues adjacent to the lipid matrix, and almost fourfold higher (0.15+/-0.05 A(-1)) for those oriented to the neighboring transmembrane helices. We believe that tritium incorporation data could help modeling transmembrane segment arrangement in the membrane.

  2. Status and practicality of detritiation and tritium production strategies for environmental remediation

    Energy Technology Data Exchange (ETDEWEB)

    Fulbright, H.H.; Schwirian-Spann, A.L.; Brunt, V. van [Univ. of South Carolina, Columbia, SC (US); Jerome, K.M.; Looney, B.B. [Westinghouse Savannah River Co., Aiken, SC (US)

    1996-02-26

    Operation of nuclear facilities throughout the world generates wastewater, groundwater and surface water contaminated with tritium. Because of a commitment to minimize radiation exposures to ''levels as low as reasonably achievable'', the US Department of Energy supports development of tritium isotope separation technologies. Also, DOE periodically documents the status and potential viability of alternative tritium treatment technologies and management strategies. The specific objectives of the current effort are to evaluate practical engineering issues, technology acceptability issues, and costs for realistic tritium treatment scenarios. A unique feature of the assessment is that the portfolio of options was expanded to include various management strategies rather than only evaluating detritiation technologies. The ultimate purpose of this effort is to assist Environmental Restoration and its support organizations in allocating future investments.

  3. Derived Intervention Levels for Tritium Based on Food and Drug Administration Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, A.

    1998-12-21

    In 1998, the FDA released it recommendations for age-dependent derived intervention levels for several radionuclides involved in nuclear accidents. One radionuclide that is not included in that document is tritium.

  4. The storage of tritium, radioactive isotope of hydrogen: materials and aging; Le stockage du tritium, isotope radioactif de l'hydrogene: materiaux et vieillissement

    Energy Technology Data Exchange (ETDEWEB)

    Thiebault, St.; Moysan, I.; Contreras, S.; Paul-Boncour, V.; Decamps, B.; Percheron-Guegan, A

    2007-07-01

    After some generalities on the reasons of using tritium, on the specificities of this hydrogen isotope and the interest of a solid storage, this work presents the different materials generally used. These materials studied in this work are called tritides. They all present the property of retaining {sup 3}He, product of the tritium radioactive decay, trapped in their matrix. This property allows to recover tritium which is practically free of {sup 3}He, but on the other hand, the presence of {sup 3}He, insoluble in the metal, generate some defects in the solid and induce changes of the tritides storage properties. These phenomena on the whole are called 'aging'. (O.M.)

  5. A Study on the Tritium Behavior in the Rice Plant after a Short-Term Exposure of HTO

    Energy Technology Data Exchange (ETDEWEB)

    Yook, D-S.; Lee, K. J.; Choi, Y-H.

    2002-02-26

    In many Asian countries including Korea, rice is a very important food crop. Its grain is consumed by humans and its straw is used to feed animals. In Korea, there are four CANDU type reactors that release relatively large amounts of tritium into the environment. Since 1997, KAERI (Korea Atomic Energy Research Institute) has carried out the experimental studies to obtain domestic data on various parameters concerning the direct contamination of plant. In this study, the behavior of tritium in the rice plant is predicted and compared with the measurement performed at KAERI. Using the conceptual model of the soil-plant-atmosphere tritiated water transport system which was suggested by Charles E. Murphy, tritium concentrations in the soil and in leaves to time were derived. If the effect of tritium concentration in the soil is considered, the tritium concentration in leaves is described as a double exponential model. On the other hand if the tritium concentration in the soil is disregarded, the tritium concentration in leaves is described by a single exponential term as other models (e.g. Belot's or STAR-H3 model). Also concentration of organically bound tritium in the seed is predicted and compared with measurements. The results can be used to predict the tritium concentration in the rice plant at a field around the site and the ingestion dose following the release of tritium to the environment.

  6. Modeling and validating tritium transfer in a grassland ecosystem in response to {sup 3}H releases

    Energy Technology Data Exchange (ETDEWEB)

    Le Dizes, S.; Maro, D.; Rozet, M.; Hebert, D.; Solier, L.; Nicoulaud, V. [Institut de radioportection et de surete nucleaire - IRSN (France); Vermorel, F.; Aulagnier, C. [Electricite de France - EDF (France)

    2014-07-01

    Tritium ({sup 3}H) is a major radionuclide released in several forms (HTO, HT) by nuclear facilities under normal operating conditions. In terrestrial ecosystems, tritium can be found under two forms: tritium in tissue free water (TFWT) following absorption of tritiated water by leaves or roots and Organically Bound Tritium (OBT) resulting from TFWT incorporation by the plant organic matter during photosynthesis. In order to study transfers of tritium from atmospheric releases to terrestrial ecosystem such as grasslands, an in-situ laboratory has been set up by IRSN on a ryegrass field plot located 2 km downwind the AREVA NC La Hague nuclear reprocessing plant (North-West of France), as was done in the past for the assessment of transfer of radiocarbon in grasslands. The objectives of this experimental field are: (i) to better understand the OBT formation in plant by photosynthesis, (ii) to evaluate transfer processes of tritium in several forms (HT, HTO) from the atmosphere (air and rainwater) to grass and soil, (iii) to develop a modeling allowing to reproduce the dynamic response of the ecosystem to tritium atmospheric releases depending of variable environmental conditions. For this purpose, tritium activity measurements will be carried out in grass (monthly measurements of HTO, OBT), in air, rainwater, soil (daily measurements of HT, HTO) and CO{sub 2}, H{sub 2}O fluxes between soil and air compartments will be carried out. Then, the TOCATTA-c model previously developed to simulate {sup 14}C transfers to pasture on a hourly time-step basis will be adapted to take account for processes specific to tritium. The model will be tested by a comparison between simulated results and measurements. The objectives of this presentation are (1) to present the organization of the experimental design of the VATO study (Validation of TOCATTA) dedicated to transfers of tritium in a grassland ecosystem, (2) to document the major assumptions, conceptual modelling and

  7. Tritium Packages and 17th RH Canister Categories of Transuranic Waste Stored Below Ground within Area G

    Energy Technology Data Exchange (ETDEWEB)

    Hargis, Kenneth Marshall [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-03-01

    A large wildfire called the Las Conchas Fire burned large areas near Los Alamos National Laboratory (LANL) in 2011 and heightened public concern and news media attention over transuranic (TRU) waste stored at LANL’s Technical Area 54 (TA-54) Area G waste management facility. The removal of TRU waste from Area G had been placed at a lower priority in budget decisions for environmental cleanup at LANL because TRU waste removal is not included in the March 2005 Compliance Order on Consent (Reference 1) that is the primary regulatory driver for environmental cleanup at LANL. The Consent Order is a settlement agreement between LANL and the New Mexico Environment Department (NMED) that contains specific requirements and schedules for cleaning up historical contamination at the LANL site. After the Las Conchas Fire, discussions were held by the U.S. Department of Energy (DOE) with the NMED on accelerating TRU waste removal from LANL and disposing it at the Waste Isolation Pilot Plant (WIPP). This report summarizes available information on the origin, configuration, and composition of the waste containers within the Tritium Packages and 17th RH Canister categories; their physical and radiological characteristics; the results of the radioassays; and potential issues in retrieval and processing of the waste containers.

  8. The influence of irradiation defects on tritium release from Li{sub 2}O

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Satoru; Grishmanov, V. [Tokyo Univ. (Japan). Faculty of Engineering

    1996-10-01

    During reactor irradiation of Li{sub 2}O defects are introduced by neutrons, triton and helium ions produced by {sup 6}Li(n, {alpha}){sup 3}H reactions and {gamma}-rays. Simultaneous measurements of luminescence emission and tritium release were performed under various conditions (temperature, sweep gas chemical composition) for Li{sub 2}O single crystal and polycrystal in order to elucidate possible influence of defects on tritium release. (author)

  9. A novel approach radiolabeling detonation nanodiamonds through the tritium thermal activation method

    Energy Technology Data Exchange (ETDEWEB)

    Badun, Gennadii A.; Chernysheva, Maria G.; Semenenko, Mikhail N.; Lisichkin, Georgii V. [Lomonosov Moscow State Univ. (Russian Federation). Chemistry Dept.; Yakovlev, Ruslan Yu.; Leonidov, Nikolai B. [Pavlov Ryazan State Medical Univ. (Russian Federation)

    2014-07-01

    Tritium labeling was introduced into detonation nanodiamonds (ND) through the tritium thermal activation method. Two target preparation techniques were developed to increase the radioactivity and the specific radioactivity of the labeled product: the desiccation of the waterless solvent suspension and the lyophilization of the hydrosol. The specific radioactivity of the labeled product was shown to correlate with the hydrogen content in the starting material and to achieve 2.6 TBq/g.

  10. A method to quantify tritium inside waste drums: He{sup 3} ingrowth method

    Energy Technology Data Exchange (ETDEWEB)

    Godot, A.; Lepeytre, C.; Hubinois, J.C. [CEA Valduc, Dept. Traitement Materiaux Nucleaires, Service Analyses- Dechets, Lab. Chimie Analytique, 21 - Is-sur-Tille (France); Arseguel, A.; Daclin, J.P.; Douche, C. [CEA Valduc, Dept. Traitement Materiaux Nucleaires, Service Analyses- Dechets, Lab. de Gestion des Dechets Trities, 21 - Is-sur-Tille (France)

    2008-07-15

    This method enables an indirect, non intrusive and non destructive measurement of the Tritium activity in wastes drums. The amount of tritium enclosed inside a wastes drum can be determined by the measurement of the leak rate of {sup 3}He of this latter. The simulation predicts that a few months are necessary for establishing the equilibrium between the {sup 3}He production inside the drum and the {sup 3}He drum leak. In practice, after one year of storage, sampling {sup 3}He outside the drum can be realized by the mean of a confining chamber that collect the {sup 3}He outflow. The apparatus, the experimental procedure and the calculation of tritium activity from mass spectrometric {sup 3}He measurements are detailed. The industrial device based on a confinement cell and the automated process to measure the {sup 3}He amount at the initial time and after the confinement time is described. Firstly, reference drums containing a certified tritium activity (HTO) in addition to organic materials have been measured to qualify the method and to evaluate its performances. Secondly, tritium activity of organic wastes drums issued from the storage building in Valduc have been determined. Results of the qualification and optimised values of the experimental parameters are reported in order to determine the performances of this industrial device. As a conclusion, the apparatus enables the measurement of an activity as low as 1 GBq of tritium in a 200 liters drum containing organic wastes. (authors)

  11. The Bremen mass spectrometric facility for the measurement of helium isotopes, neon, and tritium in water.

    Science.gov (United States)

    Sültenfuss, Jürgen; Roether, Wolfgang; Rhein, Monika

    2009-06-01

    We describe the mass spectrometric facility for measuring helium isotopes, neon, and tritium that has been operative at this institute since 1989, and also the sampling and sample preparation steps that precede the mass spectrometric analysis. For water samples in a near-equilibrium with atmospheric air, the facility achieves precision for (3)He/(4)He ratios of+/-0.4% or better, and+/-0.8 % or better for helium and neon concentrations. Tritium precision is typically+/-3 % and the detection limit 10 mTU ( approximately 1.2.10(-3) Bq/kg of pure water). Sample throughputs can reach some thousands per year. These achievements are enabled, among other features, by automation of the measurement procedure and by elaborate calibration, assisted by continual development in detail. To date, we have measured more than 15,000 samples for tritium and 23,000 for helium isotopes and neon, mostly in the context of oceanographic and hydrologic work. Some results of such work are outlined. Even when atmospheric tritium concentrations have become rather uniform, tritium provides water ages if (3)He data are taken concurrently. The technique can resolve tritium concentrations in waters of the pre-nuclear era.

  12. Safety and environmental advantages of using tritium-lean targets for inertial fusion energy

    Energy Technology Data Exchange (ETDEWEB)

    Latkowski, J.F.; Logan, B.G.; Perkins, L.J.; Meier, W.R.; Moir, R.W. [Lawrence Livermore National Lab., CA (United States); Atzeni, S. [Associazione EURATOM-ENEA sulla Fusione, Frascati (Italy); Sanz, J. [Escuela Tecnica Superior de Ingenieros Industriales, Universidad Nacional de Educacion a Distancia and Instituto de Fusion Nuclear, Dept. Ingenieria Energetica, Bilbao (Spain)

    2000-07-01

    While traditional inertial fusion energy target designs typically use equimolar portions of deuterium and tritium and have areal densities ({rho}r) of {approx} 3 g/cm{sup 2}, significant safety and environmental (S and E) advantages may be obtained through the use of high-density ({rho}r {approx} 10 g/cm{sup 2}) targets with tritium components as low as 0.5%. Such targets would absorb much of the neutron energy within the target and could be self-sufficient from a tritium breeding point of view. Tritium self-sufficiency within the target would free target chamber designers from the need to use lithium-bearing blanket materials, while low inventories within each target would translate into low inventories in target fabrication facilities. Absorption of much of the neutron energy within the target, the extremely low tritium inventories, and the greatly moderated neutron spectrum, make 'tritium-lean' targets appear quite attractive from an S and E perspective. (authors)

  13. Environmental transportation of tritium and estimation of site-specific model parameters for Kaiga site, India.

    Science.gov (United States)

    Reji, T K; Ravi, P M; Ajith, T L; Dileep, B N; Hegde, A G; Sarkar, P K

    2012-04-01

    Tritium content in air moisture, soil water, rain water and plant water samples collected around the Kaiga site, India was estimated and the scavenging ratio, wet deposition velocity and ratio of specific activities of tritium between soil water and air moisture were calculated and the results are interpreted. Scavenging ratio was found to vary from 0.06 to 1.04 with a mean of 0.46. The wet deposition velocity of tritium observed in the present study was in the range of 3.3E-03 to 1.1E-02 m s(-1) with a mean of 6.6E-03 m s(-1). The ratio of specific activity of tritium in soil moisture to that in air moisture ranged from 0.17 to 0.95 with a mean of 0.49. The specific activity of tritium in plant water in this study varied from 73 to 310 Bq l(-1). The present study is very useful for understanding the process and modelling of transfer of tritium through air/soil/plant system at the Kaiga site.

  14. [Assessment of relative biological effectiveness of tritium using chromosome aberration frequency in human blood lymphocytes].

    Science.gov (United States)

    Snigireva, G P; Khaĭmovich, T I; Nagiba, V I

    2010-01-01

    The aim of this work is to determine Relative Biological Effectiveness (RBE) of tritium beta-irradiation using chromosome aberration frequency in peripheral blood lymphocytes after radiation exposure in vitro and in vivo. The results of the experimental estimation of tritium beta-irradiation RBE in comparison with 60Co gamma-irradiation using analysis of unstable chromosome aberration frequencies in peripheral blood lymphocytes in reference to concrete conditions of the investigation were presented. It was demonstrated that tritium beta-irradiation is in total more effective than gamma-irradiation up to 1 Gy. RBE of tritium beta-irradiation was determined as 2.2 at minimum doses and decreased at higher doses (1 Gy) up to 1.25. For the first time results of the comparative analysis of frequencies of stable chromosome aberrations in two groups of professional nuclear workers (town Sarov) exposed to chronic tritium beta- and gamma-irradiation in remote period were presented. The grater RBE of tritium beta-irradiation was demonstrated. It has been estimated as 2.5.

  15. Biological effects of tritium on fish cells in the concentration range of international drinking water standards.

    Science.gov (United States)

    Stuart, Marilyne; Festarini, Amy; Schleicher, Krista; Tan, Elizabeth; Kim, Sang Bog; Wen, Kendall; Gawlik, Jilian; Ulsh, Brant

    2016-10-01

    To evaluate whether the current Canadian tritium drinking water limit is protective of aquatic biota, an in vitro study was designed to assess the biological effects of low concentrations of tritium, similar to what would typically be found near a Canadian nuclear power station, and higher concentrations spanning the range of international tritium drinking water standards. Channel catfish peripheral blood B-lymphoblast and fathead minnow testis cells were exposed to 10-100,000 Bq l(-1) of tritium, after which eight molecular and cellular endpoints were assessed. Increased numbers of DNA strand breaks were observed and ATP levels were increased. There were no increases in γH2AX-mediated DNA repair. No differences in cell growth were noted. Exposure to the lowest concentrations of tritium were associated with a modest increase in the viability of fathead minnow testicular cells. Using the micronucleus assay, an adaptive response was observed in catfish B-lymphoblasts. Using molecular endpoints, biological responses to tritium in the range of Canadian and international drinking water standards were observed. At the cellular level, no detrimental effects were noted on growth or cycling, and protective effects were observed as an increase in cell viability and an induced resistance to a large challenge dose.

  16. Tritium ions in the Source and Transport Section (STS) of KATRIN

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Manuel [Karlsruhe Institute of Technology (Germany); Collaboration: KATRIN-Collaboration

    2016-07-01

    The KArlsruhe TRItium Neutrino (KATRIN) experiment aims at the model independent measurement of the electron neutrino mass. It is designed for a neutrino mass sensitivity of 0.2 eV (90% CL) after three years of measurement time. KATRIN measures the end point of the tritium beta decay spectrum using a MAC-E filter and a Windowless Gaseous Tritium Source (WGTS). While neutral tritium gas molecules are pumped through the WGTS, the decay electrons are guided to the detector with a magnetic field. Tritium ions, however, also leave the WGTS following the magnetic field lines. For KATRIN measurements it is imperative to prevent tritium ions from reaching the detector or the spectrometers, where they could decay and cause an indistinguishable background. Ion blocking measures are implemented by electric blocking potentials and electric dipoles to drift out trapped ions. Their effective operation will be tested during KATRIN commissioning measurements: The ion flux between STS and spectrometers can be measured with the Forward Beam Monitor (FBM). It offers a manipulator arm to introduce a detector into the flux tube. For ion detection, a Faraday Cup for the FBM is being designed and constructed.

  17. Assessment of Tritium Activity in Groundwater at the Nuclear Objects Sites in Lithuania

    Directory of Open Access Journals (Sweden)

    Vigilija Cidzikienė

    2014-01-01

    Full Text Available The assessment of nuclear objects sites in Lithuania, including groundwater characterization, took place in the last few years. Tritium activity in groundwater is a very useful tool for determining how groundwater systems function. Natural and artificial tritium was measured in 8 wells in different layers (from 1.5 to 15 meters depth. The results were compared with other regions of Lithuania also. The evaluated tritium activities varied from 1.8 to 6.4 Bq/L at nuclear objects sites in Lithuania and they are coming to background level (1.83 Bq/L and other places in Lithuania. The data show, that groundwater at the nuclear power objects sites is not contaminated with artificial tritium. In this work, the vertical tritium transfer from soil water to the groundwater well at nuclear objects site was estimated. The data show that the main factor for vertical tritium transfer to the well depends on the depth of wells.

  18. Hazards summary memorandum: Savannah River reactors the production of tritium using tubular fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Babcock, D.F.; Menegus, R.L.

    1956-09-01

    The Savannah River reactors were operated initially for the production of plutonium, and used slug-type natural uranium fuel elements. Recently one reactor was converted to the production of tritium, and other reactors will be converted soon. slug-type elements (of enriched uranium-aluminum) were charged into this reactor in order to reduce to a minimum the development effort required before the shift to tritium was made. It was recognized, however, that the slug elements would be deficient in that they would give a low yield of tritium per atom of uranium-235 destroyed because of the large parasitic capture of neutrons by aluminum. Also the production rate of tritium would be low because of the small amount of surface available for the transfer of the fission heat. Both of these shortcomings will be reduced materially by the substitution of tubular elements for the slugs now employed. The development of this type of element has progressed so that a full reactor loading of tubular fuel elements is contemplated for early 1957. The special hazards related to the production of tritium using tubular fuel elements are described in this memorandum which has been written as a supplement to a report entitled ``Reactor Safety Determination -- Savannah River Plant`` (DPW-56-106), one section of which described the hazards associated with the production of tritium from slug elements.

  19. Tritium in saliva measurements used for monitoring of exposed workers; Utilisation des mesures du tritium salvaire dans la surveillance des travailleurs exposes

    Energy Technology Data Exchange (ETDEWEB)

    Le Goff, J.P.; Roullet, C. [CEA Valduc, Service de Sante au Travail, 21 - Is-sur-Tille (France); Distinguin, S.; Mangin, P.; Briot, F. [CEA Valduc, Lab. d' Analyses de Biologie Medicale, 21 - Is-sur-Tille (France)

    2006-10-15

    Simultaneous measurement of tritium in urine and saliva in exposed workers reveals differences in the kinetic fate of this radioelement in these two bodily fluids. During two years, four cases of accidental exposure, affecting seven workers, were used for these bioassays. Since the concentration of tritium increases much faster in saliva than in urine, a ratio estimated at 1 to 30 at about 30 minutes after contamination occurs, it is possible to consider saliva assay as an alternative to urine assay, which is more common practice today. (authors)

  20. Tritium/3He dating of river infiltration: an example from the Danube in the Szigetkoz Area, Hungary

    Science.gov (United States)

    Stute, M.; Deak, J.; Revesz, K.; Böhlke, J.K.; Deseo, E.; Weppernig, R.; Schlosser, P.

    1997-01-01

    3H, 3He, 4He, and Ne data were obtained from a shallow ground-water system being recharged by bank infiltration from the Danube River in northwestern Hungary. After correting for excess air, 4He and Ne concentrations reflect a recharge temperature of about 9?? C, close to the mean annual temperature of the Danube (10.4?? C). Values of 3H plus 3Hetrit, ("initial tritium") as a function of the tritium/3He age are consistent with time series measurements of tritium in the Danube. Tritium/3He ages increase linearly as a function of distance from the Danube along ground-water flow lines. A horizontal flow velocity of about 530 m yr-1 was derived from the age gradient. Most of the deviations between measured Danube tritium data and ground-water tritium/3He data can be explained by dispersive mixing.

  1. 2017 Status report-Tritium aging studies on stainless steel: Effect of hydrogen, tritium and decay helium on the fracture-toughness properties of stem, cup and block forgings

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Michael J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-28

    The materials of construction of tritium reservoirs are forged stainless steels. During service, the structural properties of the stainless steel change over time because of the diffusion of tritium into the reservoir wall and its radioactive decay to helium-3. This aging effect can cause cracks to initiate and grow which could result in a tritium leak or delayed failure of a tritium reservoir. Numerous factors affect the tendency for crack formation and propagation and are being investigated in this program. The goal of the research is to provide relevant fracture mechanics data that can be used by the design agencies in their assessments of tritium reservoir structural integrity. In this status report, new experimental results are presented on the effects of tritium and decay helium on the cracking properties of specimens taken from actual tritium reservoir forgings instead of the experimental forgings of past programs. The properties measured are more representative of actual reservoir properties because the microstructure of the specimens tested are more like that of the actual tritium reservoirs. The program was designed to measure the effects of material variables on tritium compatibility and includes two stainless steels (Type 304L and 316L stainless steel), multiple yield strengths (360-500 MPa), and multiple forging shapes (Stem, Cup, and Block).

  2. TRANSBOUNDARY IMPACT OF THE CHERNAVODSKA NPP ON TRITIUM POLLUTION OF THE DANUBE RIVER ON THE TERRITORY OF UKRAINE

    Directory of Open Access Journals (Sweden)

    V. I. VIT`KO

    2015-10-01

    Full Text Available This article reviews the influence of the Chernavodska nuclear power plant on the aquatic environment of the Danube River in the transboundary context. Data of tritium discharges, dependence of volume activity of tritium in the Danube River, and its inflows from the surrounding areas to its mouth. The average annual volume activities of tritium are provided. Assessments of the impact of the Chernavodska NPP in conditions that are different from the norm have been given.

  3. Monte Carlo Evaluation of Tritium Beta Spectrum Energy Deposition in Gallium Nitride (GaN) Direct Energy Conversion Devices

    Science.gov (United States)

    2014-09-01

    Monte Carlo Evaluation of Tritium Beta Spectrum Energy Deposition in Gallium Nitride (GaN) Direct Energy Conversion Devices by Marc Litz...MD 20783-1138 ARL-TR-7082 September 2014 Monte Carlo Evaluation of Tritium Beta Spectrum Energy Deposition in Gallium Nitride (GaN...Tritium Beta Spectrum Energy Deposition in Gallium Nitride (GaN) Direct Energy Conversion Devices 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

  4. Vacuum Permeator Analysis for Extraction of Tritium from DCLL Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Humrickhouse, Paul Weston [Idaho National Laboratory; Merrill, Brad Johnson [Idaho National Laboratory

    2014-11-01

    It is envisioned that tritium will be extracted from DCLL blankets using a vacuum permeator. We derive here an analytical solution for the extraction efficiency of a permeator tube, which is a function of only two dimensionless numbers: one that indicates whether radial transport is limited in the PbLi or in the solid membrane, and another that is the ratio of axial and radial transport times in the PbLi. The permeator efficiency is maximized by decreasing the velocity and tube diameter, and increasing the tube length. This is true regardless of the mass transport correlation used; we review several here and find that they differ little, and the choice of correlation is not a source of significant uncertainty here. The PbLi solubility, on the other hand, is a large source of uncertainty, and we identify upper and lower bounds from the literature data. Under the most optimistic assumptions, we find that a ferritic steel permeator operating at 550 °C will need to be at least an order of magnitude larger in volume than previous conceptual designs using niobium and operating at higher temperatures.

  5. Direct measurement of neutrino mass utilizing beta decay of tritium

    Energy Technology Data Exchange (ETDEWEB)

    Kawakami, Hirokane (Tokyo Univ., Tanashi (Japan). Inst. for Nuclear Study)

    1992-10-01

    Among elementary particles, neutrino is the queer, wondrous elementary particle that has asymmetric property, and in spite of strenuous efforts, its mass has not been determined. The mass value expected for electron neutrino is as extremely small as several tens eV, but its value may control the future of the space whether this vast space continues to expand as it is or turns to contract. Accordingly, it has become a very important subject for space physics as well as elementary particle physics. The mass of neutrino has been considered to be nearly zero, but in 1980, the USSR group gave the finite value of 14-46 eV for the first time. Since then, the experiments for verifying this result were begun in more than ten places in the world. The method of measuring the mass of neutrino is that by precisely measuring with a beta ray analyzer the vicinity of the maximum value in the continuous energy spectra of the electron beam emitted simultaneously with neutrinos in the beta decay of tritium, and determining the mass from its form. [pi][radical]2 type air core beta ray analyzer, beta ray source, electron detector, the comparison of the contents of the published experiments, and the results of measurement are reported. (K.I.).

  6. EXOTIC: Development of ceramic tritium breeding materials for fusion reactor blankets. The behaviour of tritium in: lithium aluminate, lithium oxide, lithium silicates, lithium zirconates

    Energy Technology Data Exchange (ETDEWEB)

    Kwast, H. [Netherlands Energy Research Foundation (ECN), Petten (Netherlands); Stijkel, H. [Netherlands Energy Research Foundation (ECN), Petten (Netherlands); Muis, R. [Netherlands Energy Research Foundation (ECN), Petten (Netherlands); Conrad, R. [Commission of the European Communities, Petten (Netherlands). Joint Reseach Centre

    1995-12-01

    This report describes the results of six EXOTIC experiments comprising a total of 48 capsules. Samples of the candidate tritium breeding materials LiAlO{sub 2}, Li{sub 2}ZrO{sub 3}, Li{sub 4}SiO{sub 4}, Li{sub 6}Zr{sub 2}O{sub 7}, Li{sub 8}ZrO{sub 6}, Li{sub 2}O and Li{sub 2}SiO{sub 3} have been irradiated at different temperature levels and up to a maximum lithium burnup of about 3%. Tritium residence times of the various breeding materials have been determined from temperature transients performed during irradiation. After irradiation the tritium inventory has been determined from small samples of the various materials. From the out-of-pile tritium release experiments activation energies were determined. These activities have been performed at ECN within the framework of the European Fusion Technology Programme on Breeding Blankets. (orig.).

  7. Development of New Tritium Labelling Methods for Peptides & Investigation of Guest-Host Mediated Electrocyclization and Sigma-Tropic Rearrangement Reactions

    DEFF Research Database (Denmark)

    Pedersen, Martin Holst Friborg

    The main parts of the work presented here is Part I; which have involved the installation of a Tritium Chemistry Facility for the synthesis of radiolabelled compounds with tritium, and Part II; the development of new tritium labelling methods for peptides. The intention of Part I is to supply...... background information of radioactivity in general, tritium uses in research and development and in the result section of Part I the installed Hevesy Tritium Facility (HTF) is introduced. One of the overall objectives for this work was investigation of new tritium labelling techniques for peptides...

  8. Estimated yield of double-strand breaks from internal exposure to tritium

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jing [Health Canada, Radiation Protection Bureau, Ottawa, ON (Canada)

    2012-08-15

    Internal exposure to tritium may result in DNA lesions. Of those, DNA double-strand breaks (DSBs) are believed to be important. However, experimental and computational data of DSBs induction by tritium are very limited. In this study, microdosimetric characteristics of uniformly distributed tritium were determined in dimensions of critical significance in DNA DSBs. Those characteristics were used to identify other particles comparable to tritium in terms of microscopic energy deposition. The yield of DSBs could be strongly dependent on biological systems and cellular environments. After reviewing theoretically predicted and experimentally determined DSB yields available in the literature for low-energy electrons and high-energy protons of comparable microdosimetric characteristics to tritium in the dimensions relevant to DSBs, it is estimated that the average DSB yields of 2.7 x 10{sup -11}, 0.93 x 10{sup -11}, 2.4 x 10{sup -11} and 1.6 x 10{sup -11} DSBs Gy{sup -1} Da{sup -1} could be reasonable estimates for tritium in plasmid DNAs, yeast cells, Chinese hamster V79 cells and human fibroblasts, respectively. If a biological system is not specified, the DSB yield from tritium exposure can be estimated as (2.3 ± 0.7) x 10{sup -11} DSBs Gy{sup -1} Da{sup -1}, which is a simple average over experimentally determined yields of DSBs for low-energy electrons in various biological systems without considerations of variations caused by different techniques used and obvious differences among different biological systems where the DSB yield was measured. (orig.)

  9. Tritium Movement and Accumulation in the NGNP System Interface and Hydrogen Plant

    Energy Technology Data Exchange (ETDEWEB)

    Hirofumi Ohashi; Steven R. Sherman

    2007-06-01

    Tritium movement and accumulation in a Next Generation Nuclear Plant with a hydrogen plant using a high temperature electrolysis process and a thermochemical water splitting sulfur iodine process are estimated by the numerical code THYTAN as a function of design, operational, and material parameters. Estimated tritium concentrations in the hydrogen product and in process chemicals in the hydrogen plant of the Next Generation Nuclear Plant using the high temperature electrolysis process are slightly higher than the drinking water limit defined by the U.S. Environmental Protection Agency and the limit in the effluent at the boundary of an unrestricted area of a nuclear plant as defined by the U.S. Nuclear Regulatory Commission. However, these concentrations can be reduced to within the limits through use of some designs and modified operations. Tritium concentrations in the Next Generation Nuclear Plant using the Sulfur-Iodine Process are significantly higher as calculated and are affected by parameters with large uncertainties (i.e., tritium permeability of the process heat exchanger, the hydrogen concentration in the heat transfer and process fluids, the equilibrium constant of the isotope exchange reaction between HT and H2SO4). These parameters, including tritium generation and the release rate in the reactor core, should be more accurately estimated in the near future to improve the calculations for the NGNP using the Sulfur-Iodine Process. Decreasing the tritium permeation through the heat exchanger between the primary and secondary circuits may be an an effective measure for decreasing tritium concentrations in the hydrogen product, the hydrogen plant, and the tertiary coolant.

  10. Development of CROPTRIT Model: The Dynamics of Tritium in Agricultural Crops

    Energy Technology Data Exchange (ETDEWEB)

    Galeriu, Dan; Melintescu, Anca [' Horia Hulubei' National Institute for Physics and Nuclear Engineering, Department of Environmental Physics and Life, 30 Reactorului St., POB MG-6, Bucharest-Magurele, RO-077125 (Romania); Lazar, Catalin [National Agricultural Research and Development Institute Fundulea, 915200 Fundulea, Calarasi County (Romania)

    2014-07-01

    Tritium has a complex behaviour once released into the environment. Tritium can be effectively incorporated into biological systems, including the human body, as organically bound tritium (OBT) with a larger residence time than tritiated water (HTO). In the last years robust models were developed for tritium dynamics in mammals (human included), birds and fish but all of them depend on the knowledge of intake for both terrestrial or aquatic food chain. The uncertainty of the present models for tritium in crops following an accidental atmospheric release, is very high and has impacts on the engineering actions for handling and decreasing the nuclear risk. The gaps in knowledge or the local variability of key parameters were recognised as source of uncertainty. Based on an interdisciplinary approach, CROPTRIT model was gradually developed in the last decade focusing on the detecting of the uncertainty sources. Crops of interest depends on each specific case but wheat and rice cover the majority of the practical needs for radiological risk modelling (the major food in Europe and Asia). An analysis of the processes involved in the Soil-Vegetation-Atmosphere Transfer (SVAT) of tritium was done in connection with the available experimental results. The agricultural research is focused on the improving of the yield and the crop growth models were developed in relation with the genotype, weather and management of fertilisation and water. For the radiological purposes, the interest lies in the pollutant concentration at harvest and the CROPTRIT model is focused on the influence of various processes contributing to variability and uncertainty of tritium (OBT and HTO) at harvest. The current results evidentiate the role of the stomatal conductance and difficulties at the day/night transitions, as well as the complex behaviour of the maintenance respiration. A review of the experimental results demonstrates the importance of OBT formation in night conditions and difficulties

  11. Estimated yield of double-strand breaks from internal exposure to tritium.

    Science.gov (United States)

    Chen, Jing

    2012-08-01

    Internal exposure to tritium may result in DNA lesions. Of those, DNA double-strand breaks (DSBs) are believed to be important. However, experimental and computational data of DSBs induction by tritium are very limited. In this study, microdosimetric characteristics of uniformly distributed tritium were determined in dimensions of critical significance in DNA DSBs. Those characteristics were used to identify other particles comparable to tritium in terms of microscopic energy deposition. The yield of DSBs could be strongly dependent on biological systems and cellular environments. After reviewing theoretically predicted and experimentally determined DSB yields available in the literature for low-energy electrons and high-energy protons of comparable microdosimetric characteristics to tritium in the dimensions relevant to DSBs, it is estimated that the average DSB yields of 2.7 × 10(-11), 0.93 × 10(-11), 2.4 × 10(-11) and 1.6 × 10(-11) DSBs Gy(-1) Da(-1) could be reasonable estimates for tritium in plasmid DNAs, yeast cells, Chinese hamster V79 cells and human fibroblasts, respectively. If a biological system is not specified, the DSB yield from tritium exposure can be estimated as (2.3 ± 0.7) × 10(-11) DSBs Gy(-1) Da(-1), which is a simple average over experimentally determined yields of DSBs for low-energy electrons in various biological systems without considerations of variations caused by different techniques used and obvious differences among different biological systems where the DSB yield was measured.

  12. Phase 1 Final Report for In-Situ Tritium Beta Detector

    Energy Technology Data Exchange (ETDEWEB)

    Berthold, J.W.; Jeffers, L.A.

    1998-04-15

    The objectives of this three-phase project were to design, develop, and demonstrate a monitoring system capable of detecting and quantifying tritium in situ in ground and surface waters, and in water from effluent lines prior to discharge into public waterways. The tritium detection system design is based on measurement of the low energy beta radiation from the radioactive decay of tritium using a special form of scintillating optical fiber directly in contact with the water to be measured. The system consists of the immersible sensor module containing the optical fiber, and an electronics package, connected by an umbilical cable. The system can be permanently installed for routine water monitoring in wells or process or effluent lines, or can be moved from one location to another for survey use. The electronics will read out tritium activity directly in units of pico Curies per liter, with straightforward calibration. In Phase 1 of the project, we characterized the sensitivity of fluor-doped plastic optical fiber to tritium beta radiation. In addition, we characterized the performance of photomultiplier tubes needed for the system. In parallel with this work, we defined the functional requirements, target specifications, and system configuration for an in situ tritium beta detector that would use the fluor-doped fibers as primary sensors of tritium concentration in water. The major conclusions from the characterization work are: A polystyrene optical fiber with fluor dopant concentration of 2% gave best performance. This fiber had the highest dopant concentration of any fibers tested. Stability may be a problem. The fibers exposed to a 22-day soak in 120 F water experienced a 10x reduction in sensitivity. It is not known whether this was due to the build up of a deposit (a potentially reversible effect) or an irreversible process such as leaching of the scintillating dye.

  13. TEMPORARY REMOVAL

    DEFF Research Database (Denmark)

    Calkins, Hugh; Hindricks, Gerhard; Cappato, Riccardo

    2017-01-01

    The publisher regrets that this article has been temporarily removed. A replacement will appear as soon as possible in which the reason for the removal of the article will be specified, or the article will be reinstated. The full Elsevier Policy on Article Withdrawal can be found at https://www.e...

  14. Export Control Requirements for Tritium Processing Design and R&D

    Energy Technology Data Exchange (ETDEWEB)

    Hollis, William Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Maynard, Sarah-Jane Wadsworth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-04-05

    This document will address requirements of export control associated with tritium plant design and processes. Los Alamos National Laboratory has been working in the area of tritium plant system design and research and development (R&D) since the early 1970’s at the Tritium Systems Test Assembly (TSTA). This work has continued to the current date with projects associated with the ITER project and other Office of Science Fusion Energy Science (OS-FES) funded programs. ITER is currently the highest funding area for the DOE OS-FES. Although export control issues have been integrated into these projects in the past a general guidance document has not been available for reference in this area. To address concerns with currently funded tritium plant programs and assist future projects for FES, this document will identify the key reference documents and specific sections within related to tritium research. Guidance as to the application of these sections will be discussed with specific detail to publications and work with foreign nationals.

  15. Study of impacts on tritium breeding ratio of a fusion DEMO reactor

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Shanliang, E-mail: shanliang.zheng@ccfe.ac.uk; Todd, Thomas N.

    2015-10-15

    Highlights: • A updated DEMO model configuration to investigate the variations. • A more integrated study on TBR as function of first wall, ports and divertor with links between these factors. • Preliminary study of the impact on TBR by different ports size with consistent blanket coverage loss. - Abstract: The existing tritium resource available for future fusion power plant D-T operation is severely limited. It is essential to breed tritium to maintain the continuous consumption in the D-T plasma so as to sustain the required fusion power. A minimum criterion of calculated tritium breeding ratio (TBR) >1.1 is adopted to ensure tritium self-sufficiency, allowing a 10% safety margin to cover calculation uncertainties. In a DEMO reactor, there are various factors impacting the availability and effectiveness of fusion generated neutrons for production of tritium. In this paper, the study focused on the impact of first wall design including materials and first wall thickness, and blanket coverage aspects such as divertor geometry and the provision of equatorial heating and diagnostic ports.

  16. Zr-Ni alloys as candidate getter materials for tritium processing

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Kuniaki; Tanaka, Kouri; Matsuyama, Masao (Hydrogen Isotope Research Center, Toyama Univ. (Japan)); Hasegawa, Kiyoshi (Faculty of Engineering, Toyama Univ. (Japan))

    1991-12-01

    Reversible tritium getters are indispensable for the safe handling of a large amount of tritium in the fuel processing for thermonuclear fusion reactors. In Zr-Ni metallic compounds, we looked for the reversible getters showing the heat of deuteride formation around -25 kcal/mol (D{sub 2}) which will be appropriate to the storage-supply-recovery of tritium. Among five metallic compounds used in this study, we found that the first plateau for ZrNi and Zr{sub 9}Ni{sub 11} showed {Delta}H{sup 0}{approx equal}-25 kcal/mol (D{sub 2}). The second plateau for ZrNi gave {Delta}H{sup 0}=-19.2 kcal/mol (D{sub 2}). This suggests that ZrNi is also applied as the source of tritium supply near one atmosphere at relatively low temperature (260deg C). They were withstanding pulverization and nonflammable against air exposure. In addition, ZrNiD{sub 2.3} was reactivated quite easily with vacuum heat at 300deg C even after air exposure. Those properties of ZrNi and/or Zr{sub 9}Ni{sub 11}, are quite promising as the reversible tritium getter in the fuel processing for thermonuclear fusion reactors. (orig.).

  17. A dynamic compartment mode for evaluating the contamination level of tritium in agricultural plants

    Energy Technology Data Exchange (ETDEWEB)

    Keum, Dong Kwon; Lee, Han Soo; Kang, Hee Seok; Jun, In; Choi, Yong Ho; Lee, Chang Woo

    2006-03-15

    This report describes a dynamic compartment model for evaluating the tritium level in agricultural plants after a short-term exposure to HTO vapor and its comparison with experimental results to test the predictive accuracy of the model. The model uses a time-dependent growth equation of a plant so that it can predict the contamination level of tritium depending on the stage of the growth of the plant, which is a major difference from some other compartment models using a constant crop yield. The model is able to calculate the time variable concentrations of the compartments representing the atmosphere, soil, and plants of four categories including leafy vegetables, root vegetables, grains, and tuber plants. Experimental results include the tissue free water tritium (TFWT) and the organically bound tritium (OBT) concentration of rice, soybean, cabbage, and radish exposed to HTO vapor for 1 h in the daytime at different growth stages. The model predictions showed that the model could simulate well not only the time-dependent tritium concentration of the plants but also the effect of the growth stage of the plant at the exposure time. Comparison of the model predictions with the experimental results suggested that the model could predict reasonably well the observed TFWT and OBT concentrations of the plants considered.

  18. Studies of the permeation and diffusion of tritium and hydrogen in TFTR

    Energy Technology Data Exchange (ETDEWEB)

    Garber, H.J.

    1975-10-01

    This report documents the main features of studies conducted on the permeation and diffusion of tritium and hydrogen through the stainless steel sections comprising the vacuum vessel of TFTR. The overall conclusion of these studies is that tritium releases to the environment resulting from TFTR operations under normal conditions will be very small, less than one curie per year. A basis is described for predicting the magnitudes of the applicable transport properties for tritium-austenitic stainless steel systems as derived from a survey of the technical literature on tritium transport. The key characteristics of the TFTR vacuum vessel that are involved in the permeation and diffusion calculations are given. Information is given regarding the contemplated plasma scenarios and associated required gas injection quantities. Various issues involved in the bakeout of the vacuum vessel are discussed; focussing principally on the problems associated with in-situ bakeout and related means to reduce outgassing from the TFTR vessel and vacuum pumping system hardware. The anticipated tritium releases are studied considering the diffusion transients.

  19. Export Control Requirements for Tritium Processing Design and R&D

    Energy Technology Data Exchange (ETDEWEB)

    Hollis, William Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Maynard, Sarah-Jane Wadsworth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-30

    This document will address requirements of export control associated with tritium plant design and processes. Los Alamos National Laboratory has been working in the area of tritium plant system design and research and development (R&D) since the early 1970’s at the Tritium Systems Test Assembly (TSTA). This work has continued to the current date with projects associated with the ITER project and other Office of Science Fusion Energy Science (OS-FES) funded programs. ITER is currently the highest funding area for the DOE OS-FES. Although export control issues have been integrated into these projects in the past a general guidance document has not been available for reference in this area. To address concerns with currently funded tritium plant programs and assist future projects for FES, this document will identify the key reference documents and specific sections within related to tritium research. Guidance as to the application of these sections will be discussed with specific detail to publications and work with foreign nationals.

  20. Review of recent japanese activities on tritium accountability in fusion reactors

    Energy Technology Data Exchange (ETDEWEB)

    Fukada, Satoshi, E-mail: sfukada@nucl.kyushu-u.ac.jp [Dept. Advanced Energy Engineering Science, Kyushu University, 6-1 Kasuga-Koen, Kasuga, 816-8580 (Japan); Oya, Yasuhisa [College of Science, Academic Institute, Shizuoka University, 836 Otani, Suruga-ku, Shizuoka 422-8529 (Japan); Hatano, Yuji [Hydrogen Isotope Research Center, Organization for Promotion Research, University of Toyama, 3190 Gofuku, Toyama 930-8555 (Japan)

    2016-12-15

    Highlights: • Review of Japanese tritium-safety research is given from several viewpoints. • The keywords are tritium accountability and self sufficiency. • Tritium-relating history, tritium facilities and legal regulation are introduced. - Abstract: After introduction of Japanese history or recent topics on tritium (T)-relating research and T-handling capacity in facilities or universities, present activities on T engineering research in Japan are summarized in short in terms of T accountability on safety. The term of safety includes wide processes from T production, assay, storing, confinement, transfer through safety handling finally to shipment of its waste. In order to achieve reliable operation of fusion reactors, several unit processes included in the T cycle of fusion reactors are investigated. Especially, the following recent advances are focused: T retention in plasma facing materials, emergency detritiation system including fire case, T leak through metal tube walls, oxide coating and water detritiation. Strict control, storing and accurate measurement are especially demanded for T accountability depending on various molecular species. Since kg-order T of vaporable radioisotope (RI) will be handled in a fuel cycle or breeding system of a fusion reactor, the accuracy of <0.1% is demanded far over the conventional technology status. Necessity to control T balance within legal restrictions is always kept in mind for operation of the future reactor.

  1. Tritium release kinetics of Li{sub 2}O with radiation defects

    Energy Technology Data Exchange (ETDEWEB)

    Grishmanov, V.; Tanaka, Satoru [Tokyo Univ. (Japan). Faculty of Engineering

    1998-03-01

    The study of an influence of radiation defects on tritium release behavior from polycrystalline Li{sub 2}O was performed by the in-pile and out-of-pile tritium release experiments. The samples were pre-irradiated by accelerated electrons to various absorbed doses up to 140 MGy and then exposed to the fluence of 10{sup 17} thermal neutrons/m{sup 2}. The radiation defects introduced by electron irradiation in Li{sub 2}O cause the retention of tritium. The linear temperature increase of the electron-irradiated samples disclosed two tritium release peaks: first starts at {approx}600 K with the maximum at {approx}800 K and second appears at {approx}950 K with the maximum at {approx}1200 K. It is thought that the tritium release at high temperatures (> 950 K) is due to the thermal decomposition of LiT. In order to further investigated the formation of lithium hydrides, the diffuse-reflectance Fourier transform infrared (FTIR) absorption spectroscopy was applied. The Li{sub 2}O powder was irradiated by electron accelerator under D{sub 2} containing atmosphere (N{sub 2} + 10% D{sub 2}). An absorption band specific to the Li{sub 2}O was observed at 668 cm{sup -1} and attributed to the Li-D stretching vibration. (author)

  2. Evaluating All-Metal Valves for Use in a Tritium Environment

    Energy Technology Data Exchange (ETDEWEB)

    Houk, L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Payton, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-09-28

    In the tritium gas processing system, it is desired to minimize polymer components due to their degradation from tritium exposure (beta decay). One source of polymers in the tritium process is valve components. A vendor has been identified that manufactures a valve that is marketed as being made from all-metal construction. This manufacturer, Ham-Let Group, manufactures a diaphragm valve (3LE series) that claims to be made entirely of metal. SRNL procured twelve (12) Ham-Let diaphragm valves for characterization and evaluation. The characterization tests include identification of the maximum pressure of these valves by performing pressure and burst tests. Leak tests were performed to ensure the valves do not exceed the acceptable leak rate for tritium service. These valves were then cycled in a nitrogen gas and/or vacuum environment to ensure they would be durable in a process environment. They were subsequently leak tested per ASTM protocol to ensure that the valves maintained their leak tight integrity. A detailed material analysis was also conducted to determine hydrogen and tritium compatibility.

  3. Tritium in Japanese precipitation following the March 2011 Fukushima Daiichi Nuclear Plant accident.

    Science.gov (United States)

    Matsumoto, Takuya; Maruoka, Teruyuki; Shimoda, Gen; Obata, Hajime; Kagi, Hiroyuki; Suzuki, Katsuhiko; Yamamoto, Koshi; Mitsuguchi, Takehiro; Hagino, Kyoko; Tomioka, Naotaka; Sambandam, Chinmaya; Brummer, Daniela; Klaus, Philipp Martin; Aggarwal, Pradeep

    2013-02-15

    Tritium concentrations in Japanese precipitation samples collected after the March 2011 accident at the Fukushima Dai-ichi Nuclear Power Plant (FNPP1) were measured. Values exceeding the pre-accident background were detected at three out of seven localities (Tsukuba, Kashiwa and Hongo) southwest of the FNPP1 at distances varying between 170 and 220 km from the source. The highest tritium content was found in the first rainfall in Tsukuba after the accident; however concentrations were 500 times less than the regulatory limit for tritium in drinking water. Tritium concentrations decreased steadily and rapidly with time, becoming indistinguishable from the pre-accident values within five weeks. The atmospheric tritium activities in the vicinity of the FNPP1 during the earliest stage of the accident was estimated to be 1.5×10(3) Bq/m(3), which is potentially capable of producing rainwater exceeding the regulatory limit, but only in the immediate vicinity of the source. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Theoretical investigation of isotope exchange reaction in tritium-contaminated mineral oil in vacuum pump.

    Science.gov (United States)

    Dong, Liang; Xie, Yun; Du, Liang; Li, Weiyi; Tan, Zhaoyi

    2015-04-28

    The mechanism of the isotope exchange reaction between molecular tritium and several typical organic molecules in vacuum pump mineral oil has been investigated by density functional theory (DFT), and the reaction rates are determined by conventional transition state theory (TST). The tritium-hydrogen isotope exchange reaction can proceed with two different mechanisms, the direct T-H exchange mechanism and the hyrogenation-dehydrogenation exchange mechanism. In the direct exchange mechanism, the titrated product is obtained through one-step via a four-membered ring hydrogen migration transition state. In the hyrogenation-dehydrogenation exchange mechanism, the T-H exchange could be accomplished by the hydrogenation of the unsaturated bond with tritium followed by the dehydrogenation of HT. Isotope exchange between hydrogen and tritium is selective, and oil containing molecules with OH and COOH groups can more easily exchange hydrogen for tritium. For aldehydes and ketones, the ability of T-H isotope exchange can be determined by the hydrogenation of T2 or the dehydrogenation of HT. The molecules containing one type of hydrogen provide a single product, while the molecules containing different types of hydrogens provide competitive products. The rate constants are presented to quantitatively estimate the selectivity of the products. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Technical/ administrative options for managing tritium MCL exceedances in P-area groundwater and Steel Creek

    Energy Technology Data Exchange (ETDEWEB)

    Ross, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-04-01

    This white paper was requested by the Core Team (United States Department of Energy [USDOE], United States Environmental Protection Agency [USEPA], and South Carolina Department of Health and Environmental Control [SCDHEC]) at the P-Area Groundwater (PAGW) Operable Unit (OU) Scoping Meeting held in January 2017 to discuss recent data and potential alternatives in support of a focused Corrective Measures Study/Feasibility Study (CMS/FS). This white paper presents an overview of the problem, and a range of technical and administrative options for addressing the tritium contamination in groundwater and Steel Creek. As tritium cannot be treated practicably, alternatives are limited to media transfer, containment and natural attenuation principally relying on radioactive decay. Using other groundwater OU decisions involving tritium as precedent, Savannah River Nuclear Solutions (SRNS) recommends that final tritium alternatives be evaluated in a CMS/FS, understanding that the likely preferred remedy will include natural attenuation with land use controls (LUCs). This is based on the inability to significantly reduce tritium impact to Steel Creek using an engineered solution as compared to natural attenuation. The timing of this evaluation could be conducted concurrently with the final remedy evaluation for volatile organic compounds (VOCs).

  6. Experimental investigation and modelling of tritium washout by precipitation in the area of the nuclear power plant of Paks, Hungary

    Energy Technology Data Exchange (ETDEWEB)

    Koello, Z., E-mail: kolloz42@gmail.co [Hertelendi Laboratory of Environmental Studies, Institute of Nuclear Research of the Hungarian Academy of Sciences, Bem ter 18/c, Debrecen 4026 (Hungary); Palcsu, L.; Major, Z.; Papp, L.; Molnar, M. [Hertelendi Laboratory of Environmental Studies, Institute of Nuclear Research of the Hungarian Academy of Sciences, Bem ter 18/c, Debrecen 4026 (Hungary); Ranga, T.; Dombovari, P.; Manga, L. [Department of Radiation Protection, Nuclear Power Plant of Paks, Paks (Hungary)

    2011-01-15

    Tritium occurs in nature in trace amounts, but its concentration is changing due to natural and artificial sources. Studies focusing on natural tritium have to take into account the effect of artificial sources. Also, the impact of tritium is an important issue in environmental protection, e.g. in connection with the emissions from nuclear power plants. The present work focuses on the rain washout of tritium emitted from the Paks nuclear power plant in Hungary. Rainwater collectors were placed around the plant and after a period of precipitation, rainwater was collected and analysed for tritium content. Samples were analysed using low-level liquid scintillation counting, with some also subject to the more accurate {sup 3}He ingrowth method. The results clearly show the trace of the tritium plume emitted from the plant; however, values are only about one order of magnitude higher than environmental background levels. A washout model was devised to estimate the distribution of tritium around the plant. The model gives slightly higher concentrations than those measured in the field, but in general the agreement is satisfactory. The modelled values demonstrate that the effect of the plant on rainwater tritium levels is negligible over a distance of some kilometres. - Research highlights: {yields}The rainwater around a nuclear power plant was collected with a special rainwater collector {yields}The rainwater after a rain event was analysed for tritium with LSC and with the helium ingrowth method. {yields}The trace of the tritium plume is clearly detectable in the rainwater. {yields}The agreement between a reversible washout model and experimental data is satisfactory. {yields}According to the model the tritium plume is hardly detectable over some kilometers from the plant

  7. MODELING TRITIUM TRANSPORT, DEPOSITION AND RE-EMISSION

    Energy Technology Data Exchange (ETDEWEB)

    Viner, B.

    2012-04-03

    The atmospheric release of tritium oxide (HTO) potentially impacts human health, typically through inhalation or absorption. Due to HTO's similarity to water, vegetation will absorb HTO by solution in the leaf water and then re-emit it, creating a number of secondary sources of HTO. Currently, models used for emergency response at Savannah River Site incorporate the transport and deposition of HTO but do not provide estimates for its potential re-emission from vegetation or soil surface though re-emission could result in prolonged exposure and greater than predicted dose for an individual downwind. A simple model of HTO transport, deposition and re-emission has been developed to examine the potential increase in exposure and dose. The model simulates an initial release of HTO that moves with a mean wind and expands through diffusion as a Gaussian puff. Deposition is modeled using previous estimates of deposition velocity for HTO and re-emission is modeled using a time constant that describes how quickly HTO is transferred between the surface and atmosphere. Additional puffs are created to simulate re-emission of HTO as well as horizontal diffusion across model grid cells. An evaluation of field data indicates that the use of a re-emission module tends to improve model predictions through improved prediction of peak concentration magnitude and location. When considering dose, nearly all of the released material is included in the dose calculation when re-emission is included. Although exposure to HTO through re-emission occurs over a few hours, the incremental increase in dose is relatively small because the atmospheric concentration of re-emitted HTO is much lower than the initial release.

  8. The ground state properties of spin-aligned atomic hydrogen, deuterium, and tritium

    Science.gov (United States)

    Etters, R. D.; Dugan, J. V., Jr.; Palmer, R. W.

    1975-01-01

    The internal energy, pressure, and compressibility of ground-state, spin-aligned atomic hydrogen, deuterium, and tritium are calculated assuming that all pair interactions occur via the atomic triplet (spin-aligned) potential. The conditions required to obtain atomic hydrogen and its isotopes in bulk are discussed; such a development would be of value in propulsion systems because of the light mass and energetic recombination of atomic hydrogen. Results show that atomic triplet hydrogen and deuterium remain gaseous at 0 K, and that tritium forms a liquid with a binding energy of approximately -0.75 K per atom at a molar volume of 130 cu cm per mole. The pair distribution function for these systems is calculated, and the predicted superfluid behavior of atomic triplet hydrogen and tritium is briefly discussed.

  9. TCODE: a computer code for analysis of tritium and vacuum systems for tokamak fusion reactors

    Energy Technology Data Exchange (ETDEWEB)

    Clemmer, R.G.

    1978-08-01

    TCODE can be used for either near-term experimental reactors or for commercial reactors. The code provides options for items that may be included in a commercial reactor such as a divertor, neutral beam heating, and a breeding blanket. The code was used to calculate tritium and vacuum system parameters for the near term reactors ITR, TNS-UP and EPR as well as for some commercial reactor designs, the UWMAK series. A selected sample of the tritium and vacuum parameters for these reactor designs is shown. Also shown are parameters for a hypothetical reactor UWMAK-III M having similar characteristics to UWMAK-III but with a higher fractional burnup (5.0% cf. 0.83%). The impact of the reactor design scenario upon major tritium and vacuum systems is discussed.

  10. Simultaneous measurement of tritium and radiocarbon by ultra-low-background proportional counting

    Energy Technology Data Exchange (ETDEWEB)

    Mace, Emily; Aalseth, Craig; Alexander, Tom; Back, Henning; Day, Anthony; Hoppe, Eric; Keillor, Martin; Moran, Jim; Overman, Cory; Panisko, Mark; Seifert, Allen

    2017-08-01

    Use of ultra-low-background capabilities at Pacific Northwest National Laboratory provide enhanced sensitivity for measurement of low-activity sources of tritium and radiocarbon using proportional counters. Tritium levels are nearly back to pre-nuclear test backgrounds (~2-8 TU in rainwater), which can complicate their dual measurement with radiocarbon due to overlap in the isotope’s respective energy spectra. This activity makes direct dual-isotope measurements challenging without additional chemistry to concentrate the tritium in a sample. We present results of single-isotope proportional counter measurements used to analyze a dual-isotope methane sample synthesized from ~120 mg of H2O and present sensitivity results.

  11. Chromatographic measurement of hydrogen isotopic and permanent gas impurities in tritium

    Energy Technology Data Exchange (ETDEWEB)

    Warner, D.K.; Kinard, C.; Bohl, D.C.

    1976-06-04

    This paper describes a gas chromatograph that was designed for dedicated analysis of hydrogen isotopic and permanent gas impurities in tritium and tritium-deuterium mixtures. The instrument that was developed substantially improved the accuracy and precision of hydrogen isotopic analysis in the 20 ppM to one mole percent range as compared with other analytical methods. Several unique design features of the instrument were required due to the radiation and isotopic exchange properties of the tritium in the samples; descriptions of these features are presented along with details of the complete chromatographic system. The experimental procedures used to calibrate the detector and statistically evaluate its performance are given, and the sources of analytical error are cited. The limitations of the present system are also discussed.

  12. Reconstructing Tritium Exposure Using Tree Rings at Lawrence Berkeley National Laboratory, California

    Science.gov (United States)

    LOVE, ADAM H.; HUNT, JAMES R.; KNEZOVICH, JOHN P.

    2010-01-01

    Annual tritium exposures were reconstructed using tree cores from Pinus jeffreyi and Eucalyptus globulus near a tritiated water vapor release stack. Both tritium (3H) and carbon-14 (14C) from the wood were measured from milligram samples using accelerator mass spectrometry. Because the annual nature of the eucalyptus tree rings was in doubt, 14C measurements provided growth rates used to estimate the age for 3H determinations. A 30-yr comparison of organically bound tritium (OBT) levels to reported 3H release data is achieved using OBT measurements from three trees near the stack. The annual average 3H, determined from atmospheric water vapor monitoring stations, is comparable to the OBT in proximal trees. For situations without adequate historical monitoring data, this measurement-based historical assessment provides the only independent means of assessing exposure as compared to fate and transport models that require prior knowledge of environmental conditions and 3H discharge patterns. PMID:14572081

  13. Determination of tritium concentrations in humans before the development of a nuclear power plant in Turkey.

    Science.gov (United States)

    Dizman, Serdar; Yilmaz, Adnan; Keser, Recep

    2015-01-01

    The most widely used method to determine the level of tritium in humans is testing urine. Tritium concentrations in urine samples of 100 persons aged 18-66 years selected randomly from a pilot region in Turkey were analysed. The average activity concentration of urine samples was 4.66 ± 1.94 Bq L(-1) and the maximum activity concentration was 27.91 Bq L(-1). The minimum detectable activity was 2.38 Bq L(-1). The annual effective dose from tritium was also evaluated on the basis of the measurement results and reference values recommended by the International Commission on Radiological Protection. The effective doses for males and females were 4.56 and 3.54 nSv, respectively. These results were lower than the permissible annual effective dose for members of the public.

  14. Effects of non-equilibrium particle distributions in deuterium-tritium burning

    Energy Technology Data Exchange (ETDEWEB)

    Michta, D; Graziani, F; Pruet, J; Luu, T

    2009-08-18

    We investigate the effects of non-equilibrium particle distributions resulting from rapid deuterium-tritium burning in plasmas using a Fokker-Planck code that incorporates small-angle Coulomb scattering, Brehmsstrahlung, Compton scattering, and thermal-nuclear burning. We find that in inertial confinement fusion environments, deviations away from Maxwellian distributions for either deuterium or tritium ions are small and result in 1% changes in the energy production rates. The deuterium and tritium effective temperatures are not equal, but differ by only about 2.5% near the time of peak burn rate. Simulations with high Z (Xe) dopants show that the dopant temperature closely tracks that of the fuel. On the other hand, fusion product ion distributions are highly non-Maxwellian, and careful treatments of energy-exchange between these ions and other particles is important for determining burn rates.

  15. Progress on a demonstrator for the atomic tritium phase of Project 8

    Science.gov (United States)

    Machado, Eric; Project 8 Collaboration

    2017-09-01

    The current phase of the Project 8 neutrino mass experiment seeks to utilize Cyclotron Radiation Emission Spectroscopy (CRES) to obtain high-resolution measurements of electron energies from molecular tritium beta decays, with the final phase of the experiment aiming to be sensitive to the full range of masses allowed by the inverted hierarchy. To that end, a future goal of the experiment is to use the CRES technique to measure the spectrum produced by magnetically-trapped source of gaseous atomic tritium, a measurement which avoids a major systematic contribution to the endpoint of the tritium energy spectrum caused by the molecular final state distribution. Progress is presented on an atomic hydrogen-based demonstrator of atom production, cooling, and magnetic-trapping techniques. This material is based upon work supported by the U.S. Department of Energy Office of Science, Office of Nuclear Physics under Award Number DE-FG02-97ER41020.

  16. Effects of tritium gas exposure on the dynamic mechanical properties of EPDM elastomer

    Energy Technology Data Exchange (ETDEWEB)

    Clark, E. A.; Staack, G. C. [Savannah River National Laboratory, Building 773-A, Aiken, SC 29808 (United States)

    2008-07-15

    Samples of ethylene propylene diene monomer (EPDM) elastomer were exposed to tritium gas in closed containers at 101 kPa (1 atmosphere) pressure and ambient temperature for about one week. Tritium exposure effects on the samples were characterized by dynamic mechanical analysis (DMA) and radiolysis products were characterized by measuring the total final pressure and composition in the exposure containers at the end of exposure period. There was no effect of one week tritium exposure on the glass transition temperature, Tg, of the samples tested. Impurity gases produced in the closed containers included HT and lesser amounts of H{sub 2}, DTO, and CT{sub 4}. The total pressure remained the same during exposure. (authors)

  17. Dynamic evaluation of environmental impact due to tritium accidental release from the fusion reactor.

    Science.gov (United States)

    Nie, Baojie; Ni, Muyi; Jiang, Jieqiong; Wu, Yican

    2015-10-01

    As one of the key safety issues of fusion reactors, tritium environmental impact of fusion accidents has attracted great attention. In this work, the dynamic tritium concentrations in the air and human body were evaluated on the time scale based on accidental release scenarios under the extreme environmental conditions. The radiation dose through various exposure pathways was assessed to find out the potential relationships among them. Based on this work, the limits of HT and HTO release amount for arbitrary accidents were proposed for the fusion reactor according to dose limit of ITER. The dynamic results aim to give practical guidance for establishment of fusion emergency standard and design of fusion tritium system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Tissue-specific incorporation and genotoxicity of different forms of tritium in the marine mussel, Mytilus edulis

    Energy Technology Data Exchange (ETDEWEB)

    Jaeschke, Benedict C., E-mail: ben@ecology.su.s [Ecotoxicology Research and Innovation Centre, School of Biomedical and Biological Sciences, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom); Millward, Geoffrey E. [Consolidated Radio-isotope Facility, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom); Moody, A. John; Jha, Awadhesh N. [Ecotoxicology Research and Innovation Centre, School of Biomedical and Biological Sciences, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom)

    2011-01-15

    Marine mussels (Mytilus edulis) were exposed to seawater spiked with tritiated water (HTO) at a dose rate of 122 and 79 {mu}Gy h{sup -1} for 7 and 14 days, respectively, and tritiated glycine (T-Gly) at a dose rate of 4.9 {mu}Gy h{sup -1} over 7 days. This was followed by depuration in clean seawater for 21 days. Tissues (foot, gills, digestive gland, mantle, adductor muscle and byssus) and DNA extracts from tissues were analysed for their tritium activity concentrations. All tissues demonstrated bio-accumulation of tritium from HTO and T-Gly. Tritium from T-Gly showed increased incorporation into DNA compared to HTO. About 90% of the initial activity from HTO was depurated within one day, whereas T-Gly was depurated relatively slowly, indicating that tritium may be bound with different affinities in tissues. Both forms of tritium caused a significant induction of micronuclei in the haemocytes of mussels. Our findings identify significant differential impacts on Mytilus edulis of the two chemical forms of tritium and emphasise the need for a separate classification and control of releases of tritiated compounds, to adequately protect the marine ecosystem. - Tritium from tritiated glycine demonstrates greater accumulation and persistence in tissues and enhanced genotoxicity in haemocytes of marine mussels, compared to tritium from tritiated water.

  19. Experimental investigation and modelling of tritium washout by precipitation in the area of the nuclear power plant of Paks, Hungary.

    Science.gov (United States)

    Köllo, Z; Palcsu, L; Major, Z; Papp, L; Molnár, M; Ranga, T; Dombóvári, P; Manga, L

    2011-01-01

    Tritium occurs in nature in trace amounts, but its concentration is changing due to natural and artificial sources. Studies focusing on natural tritium have to take into account the effect of artificial sources. Also, the impact of tritium is an important issue in environmental protection, e.g. in connection with the emissions from nuclear power plants. The present work focuses on the rain washout of tritium emitted from the Paks nuclear power plant in Hungary. Rainwater collectors were placed around the plant and after a period of precipitation, rainwater was collected and analysed for tritium content. Samples were analysed using low-level liquid scintillation counting, with some also subject to the more accurate (3)He ingrowth method. The results clearly show the trace of the tritium plume emitted from the plant; however, values are only about one order of magnitude higher than environmental background levels. A washout model was devised to estimate the distribution of tritium around the plant. The model gives slightly higher concentrations than those measured in the field, but in general the agreement is satisfactory. The modelled values demonstrate that the effect of the plant on rainwater tritium levels is negligible over a distance of some kilometres. Copyright © 2010 Elsevier Ltd. All rights reserved.

  20. Metallation/reduction as a new approach to tritium labeling. The synthesis of [[sup 3]H]ibogaine

    Energy Technology Data Exchange (ETDEWEB)

    Seltzman, H.H.; Odear, D.F.; Laudeman, C.P.; Carroll, F.I.; Wyrick, C.D. (Research Triangle Inst., Research Triangle Park, NC (United States))

    1994-04-01

    A new method is presented for the tritiation of aryl compounds with tritium gas which is conducted on the underivatized substrate. Combined directed ortho metallation and facile reduction of the carbon-potassium bond affords incorporation of tritium at high specific activity under mild conditions. The metallation/reduction method is demonstrated for the preparation of [[sup 3]H]ibogaine. (Author).

  1. Tattoo removal.

    Science.gov (United States)

    Adatto, Maurice A; Halachmi, Shlomit; Lapidoth, Moshe

    2011-01-01

    Over 50,000 new tattoos are placed each year in the United States. Studies estimate that 24% of American college students have tattoos and 10% of male American adults have a tattoo. The rising popularity of tattoos has spurred a corresponding increase in tattoo removal. Not all tattoos are placed intentionally or for aesthetic reasons though. Traumatic tattoos due to unintentional penetration of exogenous pigments can also occur, as well as the placement of medical tattoos to mark treatment boundaries, for example in radiation therapy. Protocols for tattoo removal have evolved over history. The first evidence of tattoo removal attempts was found in Egyptian mummies, dated to have lived 4,000 years BC. Ancient Greek writings describe tattoo removal with salt abrasion or with a paste containing cloves of white garlic mixed with Alexandrian cantharidin. With the advent of Q-switched lasers in the late 1960s, the outcomes of tattoo removal changed radically. In addition to their selective absorption by the pigment, the extremely short pulse duration of Q-switched lasers has made them the gold standard for tattoo removal. Copyright © 2011 S. Karger AG, Basel.

  2. Thermal fatigue and creep evaluation for the bed in tritium SDS

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Woo-seok, E-mail: wschoi@kaeri.re.kr [Korea Atomic Energy Research Institute, Yuseong, Daejeon (Korea, Republic of); Park, Chang-gyu [Korea Atomic Energy Research Institute, Yuseong, Daejeon (Korea, Republic of); Ju, Yong-sun [KOASIS, Yuseong, Daejeon (Korea, Republic of); Kang, Hyun-goo; Jang, Min-ho; Yun, Sei-hun [National Fusion Research Institute, Yuseong, Daejeon (Korea, Republic of)

    2016-11-01

    Highlights: • To evaluate the integrity of the ITER tritium SDS bed, three kinds of assessments were conducted. • The structural analysis showed that the stress induced from the thermal load and the internal pressure is within the design stress intensity. • The combined fatigue and creep assessment was also performed according to the procedure of ASME code Subsection NH. • A new operation procedure to obtain more integrity margin was recommended. • The other operation procedure could be considered which makes the rapid operation possible giving up the marginal integrity. - Abstract: The primary vessel of ITER tritium SDS bed is made of stainless steel. It is heated beyond 500 °C to desorb tritium. During this process the primary vessel is subject to thermal stress. And it is also subject to thermal fatigue by the iterative process of absorption and desorption. In addition, its operation temperature range is in the thermal creep temperature region. Therefore, the tritium SDS bed should have sufficient design stress intensity under the high temperature operating conditions. It should also be free of damage due to fatigue during the design life. Thermal analysis and structural analysis was performed using a finite element method to calculate the temperature and the stress distribution of the ITER tritium SDS bed due to the internal pressure and thermal loads. The thermal fatigue and creep effects were also evaluated since the tritium SDS bed was heated to hot temperature region where creep occurs. Based on the distribution of the primary stress and secondary stress results, two evaluation cross-sections were selected. The evaluation showed that the calculated value on the cross-sections satisfied all of the limits of the design code requirements.

  3. Evaluation of permeable and non-permeable tritium in normal condition in a fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Marta, V; Manuel, P J [Instituto de Fusion Nuclear (DENIM)/ETSII, Universidad Politecnica Madrid (UPM) (Spain); Sedano Luis, A [Ministerio de Educacion y Ciencia, Ciemat (Spain)], E-mail: marta@denim.upm.es

    2008-05-15

    The tritium cycle, technologies of process and control of the tritium in the plant will constitute a fraction of the environmental impact of the first generation of DT fusion reactors. The efforts of conceptual development of the tritium cycle are centered in the Internal Regenerator Cycle. The tritium could be recovered from a flow of He gas, or directly from solid breeder. The limits of transfers to the atmosphere are assumed {approx} 1 gr-T/a ({approx}20 Ci/a) (without species distinction). In the case of ITER, for example, we have global demands of control of 5 orders of magnitude have been demonstrated at experimental level. The transfer limits determine the key parameters in tritium Cycle (HT, HTO, as dominant, and T2, T2O as marginal). Presently, the transfer from the cycle to the environment is assumed through the exchange system of the power plant (primary to secondary). That transport is due to the permeation through HT, T2, or leakage to the coolant in the primary system. It is key the chemical optimization in the primary system, that needs to be reanalyzed in terms of radiological impact both for permeable, HT, T2, and non-permeable HTO, T2O. It is necessary considered the pathway of tritium from the reactor to the atmosphere, these processes are modelled adequately. Results of the assessments were early and chronic doses which have been evaluated for the Most Exposed Individual at particular distance bands from the release point. The impact evaluations will be performed with the computational tools (NORMTRI), besides national regulatory models, internationally accepted computer these code for dosimetric evaluations of tritiated effluents in operational conditions.

  4. Bioaccumulation of tritiated water in phytoplankton and trophic transfer of organically bound tritium to the blue mussel, Mytilus edulis.

    Science.gov (United States)

    Jaeschke, Benedict C; Bradshaw, Clare

    2013-01-01

    Large releases of tritium are currently permitted in coastal areas due to assumptions that it rapidly disperses in the water and has a low toxicity due to its low energy emissions. This paper presents a laboratory experiment developed to identify previously untested scenarios where tritium may concentrate or transfer in biota relevant to Baltic coastal communities. Phytoplankton populations of Dunaliella tertiolecta and Nodularia spumigena were exposed at different growth-stages, to tritiated water (HTO; 10 MBq l(-1)). Tritiated D. tertiolecta was then fed to mussels, Mytilus edulis, regularly over a period of three weeks. Activity concentrations of phytoplankton and various tissues from the mussel were determined. Both phytoplankton species transformed HTO into organically-bound tritium (OBT) in their tissues. D. tertiolecta accumulated significantly more tritium when allowed to grow exponentially in HTO than if it had already reached the stationary growth phase; both treatments accumulated significantly more than the corresponding treatments of N. spumigena. No effect of growth phase on bioaccumulation of tritium was detectable in N. spumigena following exposure. After mussels were given 3 feeds of tritiated D. tertiolecta, significant levels of tritium were detected in the tissues. Incorporation into most mussel tissues appeared to follow a linear relationship with number of tritiated phytoplankton feeds with no equilibrium, highlighting the potential for biomagnification. Different rates of incorporation in species from a similar functional group highlight the difficulties in using a 'representative' species for modelling the transfer and impact of tritium. Accumulations of organic tritium into the mussel tissues from tritiated-phytoplankton demonstrate an environmentally relevant transfer pathway of tritium even when water-concentrations are reduced, adding weight to the assertion that organically bound tritium acts as a persistent organic pollutant. The

  5. Groundwater Monitoring and Tritium-Tracking Plan for the 200 Area State-Approved Land Disposal Site

    Energy Technology Data Exchange (ETDEWEB)

    DB Barnett

    2000-08-31

    The 200 Area State-Approved Land Disposal Site (SALDS) is a drainfield which receives treated wastewater, occasionally containing tritium from treatment of Hanford Site liquid wastes at the 200 Area Effluent Treatment Facility (ETF). Since operation of the SALDS began in December 1995, discharges of tritium have totaled {approx}304 Ci, only half of what was originally predicted for tritium quantity through 1999. Total discharge volumes ({approx}2.7E+8 L) have been commensurate with predicted volumes to date. This document reports the results of all tritium analyses in groundwater as determined from the SALDS tritium-tracking network since the first SALDS wells were installed in 1992 through July 1999, and provides interpretation of these results as they relate to SALDS operation and its effect on groundwater. Hydrologic and geochemical information are synthesized to derive a conceptual model, which is in turn used to arrive at an appropriate approach to continued groundwater monitoring at the facility.

  6. The study of vial and cocktail for tritium radioactivity analysis of rain water by liquid scintillation counter

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Sung Jin; Kim, Hyo Jin; Kim, Hyun; Lee, Man Woo; Jeong, Dong Hyeok; Yang, Kwang Mo; Kang, Yeong Rok [Research Center, Dongnam Institute of Radiological and Medical Sciences, Busan (Korea, Republic of); Nam, Sang Hee [Dept. of Biomedical Engineering, Inje University, Gimhae (Korea, Republic of)

    2015-10-15

    Even though the current method for tritium (3H) analysis is routine, for the case of the low level of tritium in the environment, special conditions have to be fulfilled in order to obtain accurate and reliable tritium measurements. There are very little comparative data concerning commercial scintillating cocktails. The best cocktails for measuring tritium are those based on benzene derived solvent, and the worse cocktails are those which have complex chemical composition or contain too small concentration of scintillators. The aim of study was to investigate various vials and cocktails by comparison with the combination of few different scintillation cocktails and vials in our routine measurements according to count, efficiency, and the figure of merit (FOM). The comparison of three types of vials with scintillation cocktails for tritium activity analysis of rain water shows that glass vials have higher count rates and HiSafe 3 cocktails have lower FOM.

  7. Simultaneous measurement of tritium and radiocarbon by ultra-low-background proportional counting.

    Science.gov (United States)

    Mace, Emily; Aalseth, Craig; Alexander, Tom; Back, Henning; Day, Anthony; Hoppe, Eric; Keillor, Martin; Moran, Jim; Overman, Cory; Panisko, Mark; Seifert, Allen

    2017-08-01

    Use of ultra-low-background capabilities at Pacific Northwest National Laboratory provide enhanced sensitivity for measurement of low-activity sources of tritium and radiocarbon using proportional counters. Tritium levels are nearly back to pre-nuclear test backgrounds (~2-8 TU in rainwater), which can complicate their dual measurement with radiocarbon due to overlap in the beta decay spectra. We present results of single-isotope proportional counter measurements used to analyze a dual-isotope methane sample synthesized from ~120mg of H2O and present sensitivity results. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Proceedings of the 4th International Workshop on Tritium Effects in Plasma Facing Components

    Energy Technology Data Exchange (ETDEWEB)

    R. A. Causey

    1999-02-01

    The 4th International Workshop on Tritium Effects in Plasma Facing Components was held in Santa Fe, New Mexico on May 14-15, 1998. This workshop occurs every two years, and has previously been held in Livermore/California, Nagoya/Japan, and the JRC-Ispra Site in Italy. The purpose of the workshop is to gather researchers involved in the topic of tritium migration, retention, and recycling in materials used to line magnetic fusion reactor walls and provide a forum for presentation and discussions in this area. This document provides an overall summary of the workshop, the workshop agenda, a summary of the presentations, and a list of attendees.

  9. Apparent enrichment of organically bound tritium in rivers explained by the heritage of our past.

    Science.gov (United States)

    Eyrolle-Boyer, Frédérique; Boyer, Patrick; Claval, David; Charmasson, Sabine; Cossonnet, Catherine

    2014-10-01

    The global inventory of naturally produced tritium (3H) is estimated at 2.65 kg, whereas more than 600 kg have been released during atmospheric nuclear tests (NCRP, 1979; UNSCEAR, 2000) constituting the main source of artificial tritium throughout the Anthropocene. The behaviour of this radioactive isotope in the environment has been widely studied since the 1950s, both through laboratory experiments and, more recently, through field observations (e.g., Cline, 1953; Kirchmann et al., 1979; Daillant et al., 2004; McCubbin et al., 2001; Kim et al., 2012). In its "free" forms, [i.e. 3H gas or 3H hydride (HT); methyl 3H gas (CH3T); tritiated H2O or 3H-oxide (HTO); and Tissue Free Water 3H (TFWT)], tritium closely follows the water cycle. However, 3H bound with organic compounds, mainly during the basic stages of photosynthesis or through weak hydrogen links, is less exchangeable with water, which explains its persistence in the carbon cycle as re underlined recently by Baglan et al. (2013), Jean-Batiste and Fourré (2013), Kim et al. (2013a,b). In this paper, we demonstrate that terrestrial biomass pools, historically contaminated by global atmospheric fallout from nuclear testing, have constituted a significant delayed source of organically bound tritium (OBT) for aquatic systems, resulting in an apparent enrichment of OBT as compared to HTO. This finding helps to explain concentration factors (tritium concentration in biota/concentration in water) greater than 1 observed in areas that are not directly affected by industrial radioactive wastes, and thus sheds light on the controversies regarding tritium 'bioaccumulation'. Such apparent enrichment of OBT is expected to be more pronounced in the Northern Hemisphere where fallout was most significant, depending on the nature and biodegradability of terrestrial biomass at the regional scale. We further believe that OBT transfers from the continent to oceans have been sufficient to affect tritium concentrations in

  10. TRITIUM PERMEATION AND TRANSPORT IN THE GASOLINE PRODUCTION SYSTEM COUPLED WITH HIGH TEMPERATURE GAS-COOLED REACTORS (HTGRS)

    Energy Technology Data Exchange (ETDEWEB)

    Chang H. Oh; Eung S. Kim; Mike Patterson

    2011-05-01

    This paper describes scoping analyses on tritium behaviors in the HTGR-integrated gasoline production system, which is based on a methanol-to-gasoline (MTG) plant. In this system, the HTGR transfers heat and electricity to the MTG system. This system was analyzed using the TPAC code, which was recently developed by Idaho National Laboratory. The global sensitivity analyses were performed to understand and characterize tritium behaviors in the coupled HTGR/MTG system. This Monte Carlo based random sampling method was used to evaluate maximum 17,408 numbers of samples with different input values. According to the analyses, the average tritium concentration in the product gasoline is about 3.05×10-3 Bq/cm3, and 62 % cases are within the tritium effluent limit (= 3.7x10-3 Bq/cm3[STP]). About 0.19% of released tritium is finally transported from the core to the gasoline product through permeations. This study also identified that the following four parameters are important concerning tritium behaviors in the HTGR/MTG system: (1) tritium source, (2) wall thickness of process heat exchanger, (3) operating temperature, and (4) tritium permeation coefficient of process heat exchanger. These four parameters contribute about 95 % of the total output uncertainties. This study strongly recommends focusing our future research on these four parameters to improve modeling accuracy and to mitigate tritium permeation into the gasol ine product. If the permeation barrier is included in the future study, the tritium concentration will be significantly reduced.

  11. Estimating cancer risk in relation to tritium exposure from routine operation of a nuclear-generating station in Pickering, Ontario.

    Science.gov (United States)

    Wanigaratne, S; Holowaty, E; Jiang, H; Norwood, T A; Pietrusiak, M A; Brown, P

    2013-09-01

    Evidence suggests that current levels of tritium emissions from CANDU reactors in Canada are not related to adverse health effects. However, these studies lack tritium-specific dose data and have small numbers of cases. The purpose of our study was to determine whether tritium emitted from a nuclear-generating station during routine operation is associated with risk of cancer in Pickering, Ontario. A retrospective cohort was formed through linkage of Pickering and north Oshawa residents (1985) to incident cancer cases (1985-2005). We examined all sites combined, leukemia, lung, thyroid and childhood cancers (6-19 years) for males and females as well as female breast cancer. Tritium estimates were based on an atmospheric dispersion model, incorporating characteristics of annual tritium emissions and meteorology. Tritium concentration estimates were assigned to each cohort member based on exact location of residence. Person-years analysis was used to determine whether observed cancer cases were higher than expected. Cox proportional hazards regression was used to determine whether tritium was associated with radiation-sensitive cancers in Pickering. Person-years analysis showed female childhood cancer cases to be significantly higher than expected (standardized incidence ratio [SIR] = 1.99, 95% confidence interval [CI]: 1.08-3.38). The issue of multiple comparisons is the most likely explanation for this finding. Cox models revealed that female lung cancer was significantly higher in Pickering versus north Oshawa (HR = 2.34, 95% CI: 1.23-4.46) and that tritium was not associated with increased risk. The improved methodology used in this study adds to our understanding of cancer risks associated with low-dose tritium exposure. Tritium estimates were not associated with increased risk of radiationsensitive cancers in Pickering.

  12. Effects of external energetic factors on tritium release from the EXOTIC 8-3/13 neutron-irradiated beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Tiliks, Juris [Laboratory of Radiation Chemistry of Solids, Institute of Chemical Physics, University of Latvia, Kronvalda Boulevard 4, LV-1010 Riga (Latvia); Vitins, Aigars [Laboratory of Radiation Chemistry of Solids, Institute of Chemical Physics, University of Latvia, Kronvalda Boulevard 4, LV-1010 Riga (Latvia)], E-mail: aigars.vitins@lu.lv; Kizane, Gunta; Tilika, Vija; Kolodinska, Elina; Kaleja, Sarmite; Lescinskis, Bronislavs [Laboratory of Radiation Chemistry of Solids, Institute of Chemical Physics, University of Latvia, Kronvalda Boulevard 4, LV-1010 Riga (Latvia)

    2009-06-15

    Tritium release from samples of 9-13 mg of the EXOTIC 8-3/13 neutron-irradiated beryllium pebbles under the separate and simultaneous action of temperature 490-770 K, 5 MeV fast-electron radiation 14 MGy h{sup -1} for 3 h and magnetic field (MF) of 1.7 T was investigated. The pebbles were found to be very dissimilar with respect to their total tritium content-2.5-9 MBq g{sup -1}. The batch contained also some coarse agglomerates of the pebbles containing 10-19 MBq g{sup -1} of tritium having also a high tritium release. For the pebbles having the total tritium 2.5-5.3 MBq g{sup -1}, the electron radiation for 3 h caused the fractional tritium release 17-26% (B = 0) and 21-29% (B = 1.7 T), the temperature of the pebbles being <550 K. The annealing of the pebbles at the temperature ramp at 5 K/min to 553 K and at 553 K for 3 h caused the fractional tritium release 10-19% (B = 0) and 14% (B = 1.7 T). For the pebbles having the total tritium 3.6-5.8 MBq g{sup -1}, the annealing of the pebbles at the temperature ramp at 5 K/min to 770 K and at 770 K for 1 h caused the fractional tritium release 17-24% (B = 0) and 25% (B = 1.7 T), but with the simultaneous additional action of the electron radiation for 3 h the fractional tritium release was 24-42% (B = 0) and 32-37% (B = 1.7 T)

  13. Contribution to the dosimetry of tritium in the presence of inactive or active gases; Contribution a la dosimetrie du tritium en presence de gaz inactifs ou actifs

    Energy Technology Data Exchange (ETDEWEB)

    Soudain, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-07-01

    Tritium is a dangerous gas for man and the maximum admissible doses in the atmosphere are sufficiently low for the dosage to be fairly difficult. We have developed an apparatus for measuring selectively the contamination of air by this gas when it is alone or when it is associated with other gaseous contaminants. The differential apparatus using two ionization chambers makes it possible to eliminate a parasitic {gamma} radiation field. In a few particular cases, the presence of the radio-active gas has been studied. From the practical point of view, the use of these chambers made of stainless steel makes for easier use since the problems connected with wall adsorption have been satisfactorily resolved. The method can be applied without restriction and very easily to the dosage of traces tritium in air or in the form of tritiated water or tritiated steam in the atmosphere. (author) [French] Le tritium est un gaz dangereux pour l'homme et les concentrations maximales admissibles dans l'atmosphere sont suffisamment basses pour que le dosage soit delicat. Nous avons etudie et realise un appareil qui permet de mesurer selectivement la contamination de l'air par ce gaz lorsqu'il est seul ou lorsqu'il est associe a d'autres agents gazeux contaminants. Le montage differentiel a deux chambres d'ionisation permet d'eliminer un champ de rayonnement {beta} parasite. Dans certains cas particuliers, la presence du gaz radioactif a ete etudiee. Sur le plan pratique, l'utilisation des chambres en acier inoxydable facilite les applications car les problemes d'adsorption aux parois ont ete bien resolus. La methode peut s'appliquer sans restriction et tres pratiquement au dosage des traces de tritium dans l'air ou encore sous forme d'eau tritiee ou de vapeur d'eau tritiee dans l'atmosphere. (auteur)

  14. Benchmark of the Biosphere model for Wolsong Lowell Disposal Center

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sungwook; Park, Joowan [Korea Radioactive waste Management Corporation, Yongin (Korea, Republic of)

    2010-07-01

    The Elagico model conceptualization is intended to confirm the Amber biosphere models referred from the SORA. A comparison of results from the Elagico models and the Amber model was carried out by running the models with a constant unit release rate for a set of radionuclides, assuming a constant source for one million years. The analysis was conducted for releases to the sea. The model equations were implemented in Elagico using the same model as in the SORA. Since the results obtained with Amber and Elagico are in general consistent, it can be concluded that equations implementation in both Amber and Elagico corresponds well with the model description. The reasonable agreement obtained for the majority of the radionuclides indicates that the same parameter values are used and that the numerical methods implemented in these tools give consistent solutions. However, differences between some of the results suggest that there is a difference between the implemented models for this benchmark analysis.

  15. Investigation on efficiency of gas liquid contactor used as tritium extraction unit for HCLL-TBM Pb-16Li loop

    Energy Technology Data Exchange (ETDEWEB)

    Utili, M., E-mail: marco.utili@enea.it [C.R. ENEA, C.R. Brasimone, 40032, Camugnano (Italy); Aiello, A.; Laffi, L.; Malavasi, A. [C.R. ENEA, C.R. Brasimone, 40032, Camugnano (Italy); Ricapito, I. [TBM& MD Project, Fusion for Energy, EU Commission, Carrer J. Pla, 2, Builiding B3, 08019 Barcelona (Spain)

    2016-11-01

    Highlights: • A dedicated facility, called TRIEX was manufactured in order to investigate the tritium extraction efficiency of GLC as TEU (Tritium Extraction Unit) of HCLL-TBM. • The experimental characterization of GLC has been performed in view of its utilization for the TES (Tritium Extraction System) of ITER. • An analytical model has been developed in this paper. • Results of experimental measurement of the parameters such as tritium extraction efficiency have been analyzed and compared with literature data. • It turns out the Tritium extraction value in the range between 10- and 30%. - Abstract: One of the main open issues in the design of the HCLL Test Blanket System for nuclear fusion energy applications is the design and testing of the Tritium Extraction Unit (TEU). The lead-lithium alloy which, in the HCLL blanket project, is used both as tritium breeder and neutron multiplier, will generate tritium that must be extracted with an efficiency as high as possible in order to keep low the tritium concentration in the liquid metal, then minimizing tritium permeation into the main coolant, the consequent CPS load and, last but not least, tritium permeation into the Port Cell through the PbLi loop pipes. Gas-liquid contactors (GLC) and, more in detail, packed columns are the reference technology for TEU of European ITER HCLL-TBS. An experimental campaign on a GCL packed column was performed in TRIEX (TRItium Extraction) facility in ENEA Brasimone Research Centre. Starting from the experimental results a parametric analysis was performed in order determine the basic parameters of the gas extraction process and consequently the efficiency of this technology in different operative conditions. Experiments were conducted at a constant temperature of 450 °C varying the mass flow rate in the range 0,1–0,35 kg/s for lead lithium and 5–150 Nl/h for Ar stripping gas. The hydrogen partial pressure in lead lithium at extractor inlet was investigated in the

  16. Skin lesion removal

    Science.gov (United States)

    Shave excision - skin; Excision of skin lesions - benign; Skin lesion removal - benign; Cryosurgery - skin, benign; BCC - removal; Basal cell cancer - removal; Actinic keratosis - removal; Wart - removal; Squamous cell - removal; ...

  17. An analysis of workers' tritium concentration in urine samples as a function of time after intake at Korean pressurised heavy water reactors.

    Science.gov (United States)

    Kim, Hee Geun; Kong, Tae Young

    2012-12-01

    In general, internal exposure from tritium at pressurised heavy water reactors (PHWRs) accounts for ∼20-40 % of the total radiation dose. Tritium usually reaches the equilibrium concentration after a few hours inside the body and is then excreted from the body with an effective half-life in the order of 10 d. In this study, tritium metabolism was reviewed using its excretion rate in urine samples of workers at Korean PHWRs. The tritium concentration in workers' urine samples was also measured as a function of time after intake. On the basis of the monitoring results, changes in the tritium concentration inside the body were then analysed.

  18. Investigation of the tritium release from Building 324 in which the stack tritium sampler was off, April 14 through 17, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D.H.

    1998-06-30

    On April 14, 1998, a Pacific Northwest National Laboratory (PNNL) researcher performing work in the Building 324 facility approached facility management and asked if facility management could turn off the tritium sampler in the main exhaust stack. The researcher was demonstrating the feasibility of treating components from dismantled nuclear weapons in a device called a plasma arc furnace and was concerned that the sampler would compromise classified information. B and W Hanford Company (BWHC) operated the facility, and PNNL conducted research as a tenant in the facility. The treatment of 200 components in the furnace would result in the release of up to about 20 curies of tritium through the facility stack. The exact quantity of tritium was calculated from the manufacturing data for the weapons components and was known to be less than 20 curies. The Notice of Construction (NOC) approved by the Washington State Department of Health (WDOH) had been modified to allow releasing 20 curies of tritium through the stack in support of this research. However, there were irregularities in the way the NOC modification was processed. The researcher was concerned that data performed on the sampler could be used to back-calculate the tritium content of the components, revealing classified information about the design of nuclear weapons. He had discussed this with the PNNZ security organization, and they had told him that data from the sampler would be classified. He was also concerned that if he could not proceed with operation of the plasma arc furnace, the furnace would be damaged. The researcher told BWHC management that the last time the furnace was shut down and restarted it had cost $0.5 million and caused a six month delay in the project`s schedule. He had already begun heating up the furnace before recognizing the security problem and was concerned that stopping the heatup could damage the furnace. The NOC that allowed the research did not have an explicit requirement to

  19. Hair Removal

    Science.gov (United States)

    ... in girls who need it. Deciding to remove body hair is a personal choice. Getting rid of body hair doesn't make a person healthier, and you ... you don't want to. Some cultures view body hair as beautiful and natural, so do what feels ...

  20. Radioprotective effect of calcium given with feed on exposure to tritium oxide

    Energy Technology Data Exchange (ETDEWEB)

    Kazbekova, D.A.; Kalistratova, V.S.; Kulyamin, V.A.

    1979-12-01

    A 1.5-fold increase in calcium content of the rat diet attenuates the symptoms of radiation sickness induced by tritium and prolongs survival time. Elevation of blood serum nonspecific cholinesterase level and stimulation of lymphopoiesis were observed. The possible mechanisms of radioprotective action of calcium are discussed.

  1. The measurement of tritium in water samples with electrolytic enrichment using liquid scintillation counter

    Directory of Open Access Journals (Sweden)

    Janković Marija M.

    2012-01-01

    Full Text Available Tritium (3H present in the environment decreased in the last decades and nowadays it has low activity concentrations. Measurement of low-level tritium activities in natural waters, e. g. in precipitation, groundwater, and river water requires special techniques for water pretreatment and detection of low-level radioactivity. In order to increase the tritium concentration to an easily measurable level, electrolytic enrichment must be applied. This paper presents the enrichment method performed by electrolysis in a battery of 18 cells, giving an enrichment factor of 5.84 (calculated from 59 electrolyses. The calculated mean values of the separation factor and enrichment parameter were 4.10 and 0.84, respectively. Results for tritium activity in precipitation and surface water collected in Belgrade during 2008 and 2009 are presented. The Radiation and Environmental Protection Department of the Vinča Institute of Nuclear Sciences, participated in the IAEA TRIC2008 international intercomparison exercise. The participation in the intercomparisons for any laboratory doing low-level 3H measurements in the waters is very important and useful. It is considered the best way to check the entire procedure and methods of the measurements and the reliability of the standard used. The analysis of the reported 3H activity results showed that all results for five intercomparison samples, for which electrolytic enrichment were applied prior to the 3H measurement, are acceptable.

  2. iiv vito estimation of body composition in cattle with tritium and urea

    African Journals Online (AJOL)

    scintillation counter using 1,0 g duplicate aliquots of radio-active water in l0 ml scintillation liquid as described by Meissner & Bieler (1975). Apparent urea or TOH space was calculated from the ratio of urea or tritium infused to the concentration at equilibrium,or at various other stages prior to equilibrium, after correction for ...

  3. TRITIUM UNCERTAINTY ANALYSIS FOR SURFACE WATER SAMPLES AT THE SAVANNAH RIVER SITE

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, R.

    2012-07-31

    Radiochemical analyses of surface water samples, in the framework of Environmental Monitoring, have associated uncertainties for the radioisotopic results reported. These uncertainty analyses pertain to the tritium results from surface water samples collected at five locations on the Savannah River near the U.S. Department of Energy's Savannah River Site (SRS). Uncertainties can result from the field-sampling routine, can be incurred during transport due to the physical properties of the sample, from equipment limitations, and from the measurement instrumentation used. The uncertainty reported by the SRS in their Annual Site Environmental Report currently considers only the counting uncertainty in the measurements, which is the standard reporting protocol for radioanalytical chemistry results. The focus of this work is to provide an overview of all uncertainty components associated with SRS tritium measurements, estimate the total uncertainty according to ISO 17025, and to propose additional experiments to verify some of the estimated uncertainties. The main uncertainty components discovered and investigated in this paper are tritium absorption or desorption in the sample container, HTO/H{sub 2}O isotopic effect during distillation, pipette volume, and tritium standard uncertainty. The goal is to quantify these uncertainties and to establish a combined uncertainty in order to increase the scientific depth of the SRS Annual Site Environmental Report.

  4. Project 8: Determining neutrino mass from tritium beta decay using a frequency-based method

    Energy Technology Data Exchange (ETDEWEB)

    Doe, Peter J.; Kofron, Jared N.; MCBride, Lisa; Robertson, R. G. H.; Rosenberg, Leslie; Rybka, Gray; Doelman, S.; Rogers, Alan E.; Formaggio, Joseph; Furse, Daniel; Oblath, Noah S.; LaRoque, Benjamin; Leber, Michelle; Monreal, Ben; Bahr, Matthew; Asner, David M.; Jones, Anthony M.; Fernandes, Justin L.; VanDevender, Brent A.; Patterson, Ryan B.; Bradley, Rich; Thummler, Thomas

    2013-10-04

    A general description is given of Project 8, a new approach to measuring the neutrino mass scale via the beta decay of tritium. In Project 8, the energy of electrons emitted in beta decay is determined from the frequency of cyclotron radiation emitted as the electrons spiral in a uniform magnetic field

  5. Tritium speciation in nuclear reactor bioshield concrete and its impact on accurate analysis.

    Science.gov (United States)

    Kim, Dae Ji; E Warwick, Phillip; Croudace, Ian W

    2008-07-15

    Tritium ((3)H) is produced in nuclear reactors via several neutron-induced reactions [(2)H(n, gamma)(3)H, (6)Li(n, alpha)(3)H, (10)B(n, 2alpha)(3)H, (14)N(n, (3)H)(12)C, and ternary fission (fission yield reactor bioshield using combustion and liquid scintillation analysis has identified two forms of (3)H, one weakly bound and one strongly bound. The strongly bound tritium, which originates from neutron capture on trace lithium ((6)Li) within mineral phases, requires temperatures in excess of 350 degrees C to achieve quantitative recovery. The weakly bound form of tritium can be liberated at significantly lower temperatures (100 degrees C) as HTO and is associated with dehydration of hydrous mineral components. Without an appreciation that two forms of tritium can exist in reactor bioshields, the (3)H content of samples may be severely underestimated using conventional analytical approaches. These findings exemplify the need to develop robust radioactive waste characterization procedures in support of nuclear decommissioning programs.

  6. Using high resolution tritium profiles to quantify the effects of melt on two Spitsbergen ice cores

    NARCIS (Netherlands)

    van der Wel, L.G.; Streurman, H.J.; Isaksson, E.; Helsen, M.M.|info:eu-repo/dai/nl/325802459; van de Wal, R.S.W.|info:eu-repo/dai/nl/101899556; Martma, T.; Pohjola, V.A.; Moore, J.C.; Meijer, H.A.J.

    2011-01-01

    Ice cores from small ice caps provide valuable climatic information, additional to that of Greenland and Antarctica. However, their integrity is usually compromised by summer meltwater percolation. To determine to what extent this can affect such ice cores, we performed high-resolution tritium

  7. Protection of ecological receptors exposed to tritium from the Nevada Test Site underground test area

    Energy Technology Data Exchange (ETDEWEB)

    Meyers-Schoene, L.; Bowen, D.G. [IT Corp., Albuquerque, NM (United States); Mayasich, S.A. [IT Corp., St. Paul, MN (United States); Bangerter, R.M. [Dept. of Energy, Las Vegas, NV (United States). Nevada Operations Office

    1995-12-31

    The Nevada Test Site Corrective Action Strategy includes an evaluation of risks to the environment that may be associated with underground nuclear test activities that occurred in the past. Phase 1 of the Underground Test Area (UGTA) Project focuses on tritium. Tritium in deep subsurface soil was modeled from soil to groundwater, and from groundwater to surface water discharge points using a hydrogeological model developed specifically for UGTA. Ecological pathways of concern are those related to the exposure of biota to contaminated surface water and groundwater. Surface water receptors selected were based on those key to the habitats of greatest concern at Ash meadows, nevada, an off-site discharge location. These receptors were algae, pupfish, and great blue heron. Groundwater receptors were microorganisms known to exist in water beneath Rainier Mesa. Acceptable tritium concentrations in surface and groundwater were estimated using models created by Pacific Northwest Laboratory and Oak Ridge National Laboratory, and radiation effects data from the literature. Based on this analysis, concentrations of tritium less than 9.3 {times} 10{sup 7} pCi/L were predicted to be protective of aquatic and semi-aquatic populations, and of the endangered desert pupfish.

  8. LLNL review of the 1994 accelerator production of tritium (APT) concept

    Energy Technology Data Exchange (ETDEWEB)

    Alesso, H.P.; Barnard, J.J.; Booth, R. [and others

    1995-03-08

    LLNL was asked in September 1994 to review the accelerator production of tritium (APT) concept as it had evolved up to the fall of 1994. The purpose was not to compare it to other sources of tritium, but to identify possible technical flaws in the concept and to assess feasibility. The APT concept reviewed was based on a 1.0 GeV normal conducting proton linac operating CW at currents up to 200 mA with a target of tungsten and blanket of {sup 3}He and lead. The LLNL review group concurs with the conclusions of four previous reviews (1989 to 1994) that this concept can meet the tritium requirements of a reduced stockpile of approximately 3,500 {+-} 1,500 warheads. The authors believe that the predicted tritium production rate is based on sound nuclear and transport models and that the schedules for technology demonstrations, design, and construction are realistic. They conclude that the technical risk of the concept is low and can be managed within the risk reduction program. The risk reduction program should focus on risk to the schedule and on cost reduction.

  9. Calibration of a liquid scintillation counter to assess tritium levels in various samples

    Energy Technology Data Exchange (ETDEWEB)

    Al-Haddad, M.N. E-mail: meyassar@kfupm.edu.sa; Fayoumi, A.H.; Abu-Jarad, F.A

    1999-12-11

    An LKB-Wallac 1217 Liquid Scintillation Counter (LSC) was calibrated with a newly adopted cocktail. The LSC was then used to measure tritium levels in various samples to assess the compliance of tritium levels with the recommended international levels. The counter was calibrated to measure both biological and operational samples for personnel and for an accelerator facility at KFUPM. The biological samples include the bioassay (urine), saliva, and nasal tests. The operational samples of the light ion linear accelerator include target cooling water, organic oil, fomblin oil, and smear samples. Sets of standards, which simulate various samples, were fabricated using traceable certified tritium standards. The efficiency of the counter was obtained for each sample. The typical range of the efficiencies varied from 33% for smear samples down to 1.5% for organic oil samples. A quenching curve for each sample is presented. The minimum detectable activity for each sample was established. Typical tritium levels in biological and operational values are presented. All measured values are far below the recommended international limits.

  10. Statistical criteria for possible indications of new physics in tritium $\\beta$-decay spectrum

    CERN Document Server

    Lokhov, Aleksei

    2014-01-01

    The method of quasi-optimal weights is applied to constructing (quasi-)optimal criteria for various anomalous contributions in experimental spectra. Anomalies in the spectra could indicate physics beyond the Standard Model (additional interactions and neutrino flavours, Lorenz violation etc.). In particular the cumulative tritium $\\beta$-decay spectrum (for instance, in Troitsk-$\

  11. Measurement of the tritium concentration in the fractionated distillate from environmental water samples.

    Science.gov (United States)

    Atkinson, Robert; Eddy, Teresa; Kuhne, Wendy; Jannik, Tim; Brandl, Alexander

    2014-09-01

    Standard procedures for the measurement of tritium in water samples often require distillation of an appropriate sample aliquot. This distillation process may result in a fractionation of tritiated water and regular light water due to the vapor pressure isotope effect, introducing either a bias or an additional contribution to the total tritium measurement uncertainty. The current study investigates the relative change in vapor pressure isotope effect in the course of the distillation process, distinguishing it from and extending previously published measurements. The separation factor as a quantitative measure of the vapor pressure isotope effect is found to assume values of 1.04 ± 0.036, 1.05 ± 0.026, and 1.07 ± 0.038, depending on the vigor of the boiling process during distillation of the sample. A lower heat setting in the experimental setup, and therefore a less vigorous boiling process, results in a larger value for the separation factor. For a tritium measurement in water samples where the first 5 mL are discarded, the tritium concentration could be underestimated by 4-7%. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Development, description and validation of a Tritium Environmental Release Model (TERM).

    Science.gov (United States)

    Jeffers, Rebecca S; Parker, Geoffrey T

    2014-01-01

    Tritium is a radioisotope of hydrogen that exists naturally in the environment and may also be released through anthropogenic activities. It bonds readily with hydrogen and oxygen atoms to form tritiated water, which then cycles through the hydrosphere. This paper seeks to model the migration of tritiated species throughout the environment - including atmospheric, river and coastal systems - more comprehensively and more consistently across release scenarios than is currently in the literature. A review of the features and underlying conceptual models of some existing tritium release models was conducted, and an underlying aggregated conceptual process model defined, which is presented. The new model, dubbed 'Tritium Environmental Release Model' (TERM), was then tested against multiple validation sets from literature, including experimental data and reference tests for tritium models. TERM has been shown to be capable of providing reasonable results which are broadly comparable with atmospheric HTO release models from the literature, spanning both continuous and discrete release conditions. TERM also performed well when compared with atmospheric data. TERM is believed to be a useful tool for examining discrete and continuous atmospheric releases or combinations thereof. TERM also includes further capabilities (e.g. river and coastal release scenarios) that may be applicable to certain scenarios that atmospheric models alone may not handle well. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. An overview of organically bound tritium experiments in plants following a short atmospheric HTO exposure.

    Science.gov (United States)

    Galeriu, D; Melintescu, A; Strack, S; Atarashi-Andoh, M; Kim, S B

    2013-04-01

    The need for a less conservative, but reliable risk assessment of accidental tritium releases is emphasized in the present debate on the nuclear energy future. The development of a standard conceptual model for accidental tritium releases must be based on the process level analysis and the appropriate experimental database. Tritium transfer from atmosphere to plants and the subsequent conversion into organically bound tritium (OBT) strongly depends on the plant characteristics, seasons, and meteorological conditions, which have a large variability. The present study presents an overview of the relevant experimental data for the short term exposure, including the unpublished information, also. Plenty of experimental data is provided for wheat, rice, and soybean and some for potato, bean, cherry tomato, radish, cabbage, and tangerine as well. Tritiated water (HTO) uptake by plants during the daytime and nighttime has an important role in further OBT synthesis. OBT formation in crops depends on the development stage, length, and condition of exposure. OBT translocation to the edible plant parts differs between the crops analyzed. OBT formation during the nighttime is comparable with that during the daytime. The present study is a preliminary step for the development of a robust model of crop contamination after an HTO accidental release. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Validation test for CAP88 predictions of tritium dispersion at Los Alamos National Laboratory.

    Science.gov (United States)

    Michelotti, Erika; Green, Andrew; Whicker, Jeffrey; Eisele, William; Fuehne, David; McNaughton, Michael

    2013-08-01

    Gaussian plume models, such as CAP88, are used regularly for estimating downwind concentrations from stack emissions. At many facilities, the U.S. Environmental Protection Agency (U.S. EPA) requires that CAP88 be used to demonstrate compliance with air quality regulations for public protection from emissions of radionuclides. Gaussian plume models have the advantage of being relatively simple and their use pragmatic; however, these models are based on simplifying assumptions and generally they are not capable of incorporating dynamic meteorological conditions or complex topography. These limitations encourage validation tests to understand the capabilities and limitations of the model for the specific application. Los Alamos National Laboratory (LANL) has complex topography but is required to use CAP88 for compliance with the Clean Air Act Subpart H. The purpose of this study was to test the accuracy of the CAP88 predictions against ambient air measurements using released tritium as a tracer. Stack emissions of tritium from two LANL stacks were measured and the dispersion modeled with CAP88 using local meteorology. Ambient air measurements of tritium were made at various distances and directions from the stacks. Model predictions and ambient air measurements were compared over the course of a full year's data. Comparative results were consistent with other studies and showed the CAP88 predictions of downwind tritium concentrations were on average about three times higher than those measured, and the accuracy of the model predictions were generally more consistent for annual averages than for bi-weekly data.

  15. Project 8: Determining neutrino mass from tritium beta decay using a frequency-based method

    CERN Document Server

    Doe, P J; McBride, E L; Robertson, R G H; Rosenberg, L J; Rybka, G; Doelman, S; Rogers, A; Formaggio, J A; Furse, D; Oblath, N S; LaRoque, B H; Leber, M; Monreal, B; Bahr, M; Asner, D M; Jones, A M; Fernandes, J; VanDevender, B A; Patterson, R; Bradley, R; Thuemmler, T

    2013-01-01

    A general description is given of Project 8, a new approach to measuring the neutrino mass scale via the beta decay of tritium. In Project 8, the energy of electrons emitted in beta decay is determined from the frequency of cyclotron radiation emitted as the electrons spiral in a uniform magnetic field.

  16. Tritium planigraphy comparative structural study of tobacco mosaic virus and its mutant with altered host specificity.

    Science.gov (United States)

    Dobrov, Eugenie N; Badun, Gennadii A; Lukashina, Elena V; Fedorova, Nataliya V; Ksenofontov, Alexander L; Fedoseev, Vladimir M; Baratova, Ludmila A

    2003-08-01

    Spatial organization of wild-type (strain U1) tobacco mosaic virus (TMV) and of the temperature-sensitive TMV ts21-66 mutant was compared by tritium planigraphy. The ts21-66 mutant contains two substitutions in the coat protein (Ile21-->Thr and Asp66-->Gly) and, in contrast with U1, induces a hypersensitive response (formation of necroses) on the leaves of plants bearing a host resistance gene N' (for example Nicotiana sylvestris); TMV U1 induces systemic infection (mosaic) on the leaves of such plants. Tritium distribution along the coat protein (CP) polypeptide chain was determined after labelling of both isolated CP preparations and intact virions. In the case of the isolated low-order (3-4S) CP aggregates no reliable differences in tritium distribution between U1 and ts21-66 were found. But in labelling of the intact virions a significant difference between the wild-type and mutant CPs was observed: the N-terminal region of ts21-66 CP incorporated half the amount of tritium than the corresponding region of U1 CP. This means that in U1 virions the CP N-terminal segment is more exposed on the virion surface than in ts21-66 virions. The possibility of direct participation of the N-terminal tail of U1 CP subunits in the process of the N' hypersensitive response suppression is discussed.

  17. Capture of Tritium Released from Cladding in the Zirconium Recycle Process

    Energy Technology Data Exchange (ETDEWEB)

    Bruffey, Stephanie H [ORNL; Spencer, Barry B [ORNL; DelCul, Guillermo Daniel [ORNL

    2016-08-31

    This report is issued as the first revision to FCRD-MRWFD-2016-000297. Zirconium may be recovered from the Zircaloy® cladding of used nuclear fuel (UNF) for recycle or to reduce the quantities of high-level waste destined for a geologic repository. Recovery of zirconium using a chlorination process is currently under development at the Oak Ridge National Laboratory. The approach is to treat the cladding with chlorine gas to convert the zirconium in the alloy (~98 wt % of the alloy mass) to zirconium tetrachloride. A significant fraction of the tritium (0–96%) produced in nuclear fuel during irradiation may be found in zirconium-based cladding and could be released from the cladding when the solid matrix is destroyed by the chlorination reaction. To prevent uncontrolled release of radioactive tritium to other parts of the plant or to the environment, a method to recover the tritium may be required. The focus of this effort was to (1) identify potential methods for the recovery of tritium from the off-gas of the zirconium recycle process, (2) perform scoping tests on selected recovery methods using non-radioactive gas simulants, and (3) select a process design appropriate for testing on radioactive gas streams generated by the engineering-scale zirconium recycle demonstrations on radioactive used cladding.

  18. Capture of Tritium Released from Cladding in the Zirconium Recycle Process

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Barry B [ORNL; Bruffey, Stephanie H [ORNL; DelCul, Guillermo Daniel [ORNL; Walker, Trenton Baird [ORNL

    2016-08-31

    Zirconium may be recovered from the Zircaloy® cladding of used nuclear fuel (UNF) for recycle or to reduce the quantities of high-level waste destined for a geologic repository. Recovery of zirconium using a chlorination process is currently under development at the Oak Ridge National Laboratory. The approach is to treat the cladding with chlorine gas to convert the zirconium in the alloy (~98 wt % of the alloy mass) to zirconium tetrachloride. A significant fraction of the tritium (0–96%) produced in nuclear fuel during irradiation may be found in zirconium-based cladding and could be released from the cladding when the solid matrix is destroyed by the chlorination reaction. To prevent uncontrolled release of radioactive tritium to other parts of the plant or to the environment, a method to recover the tritium may be required. The focus of this effort was to (1) identify potential methods for the recovery of tritium from the off-gas of the zirconium recycle process, (2) perform scoping tests on selected recovery methods using nonradioactive gas simulants, and (3) select a process design appropriate for testing on radioactive gas streams generated by the engineering-scale zirconium recycle demonstrations on radioactive used cladding.

  19. Emission of muonic tritium into vacuum: An atomic beam for muon experiments

    Energy Technology Data Exchange (ETDEWEB)

    Fujiwara, M.C. [University of British Columbia (Canada); Bailey, J.M. [Chester Technology (United Kingdom); Beer, G.A. [University of Victoria (Canada); Beveridge, J.L. [TRIUMF (Canada); Douglas, J.L. [University of Victoria (Canada); Huber, T.M. [Gustavus Adolphus College (United States); Jacot-Guillarmod, R. [Universite de Fribourg, CH-1700 (Switzerland); Kammel, P. [University of California (United States); Kim, S.K. [Jeonbuk National University (Korea, Republic of); Knowles, P.E. [University of Victoria (Canada); Kunselman, A.R. [University of Wyoming (United States); Maier, M. [University of Victoria (Canada); Markushin, V.E. [Paul Scherrer Institute (Switzerland); Marshall, G.M. [TRIUMF (Canada); Martoff, C.J. [Temple University (United States); Mason, G.R. [University of Victoria (Canada); Mulhauser, F. [Universite de Fribourg, CH-1700 (Switzerland); Olin, A. [University of Victoria (Canada); Petitjean, C. [Paul Scherrer Institute (Switzerland); Porcelli, T.A. [University of Victoria (Canada)] (and others)

    1997-04-15

    The emission of muonic tritium atoms from a thin film of hydrogen isotopes into vacuum was observed. The time and position of the muon decays were measured by tracking the decay electron trajectory. The observations are useful both for testing the theoretical cross sections for muonic atomic interactions, and producing an atomic beam of slow {mu}{sup -}t with a controllable energy.

  20. Simultaneous catalytic regime of tritium and helium-3 in D–D fusion ...

    Indian Academy of Sciences (India)

    A catalytic regime of tritium and helium-3 in deuterium–deuterium fusion, including ion–electron collisions, mechanical expansion, bremsstrahlung radiation, inverse Compton scattering losses and reacting particles energy effect has been investigated. In this paper a new fuel configuration, DT 3He, is formed by adding ...

  1. Radiation quality of tritium: a comparison with 60Co gamma rays.

    Science.gov (United States)

    Chen, Jing

    2013-09-01

    In a previous study, microdosimetric simulations were performed for tritium uniformly distributed in a medium, and for tritium bound to biologically critical sites of dimensions from 10 nm to 2 µm. Results of local energy density, i.e. energy deposition in microscopic regions, are different for these two cases. Based on the spatial distribution of energy deposition, dose mean lineal energies are calculated for tritium in the forms of tritiated water (HTO) and organically bound tritium (OBT). The dose mean lineal energies of OBT are about a factor of 1.7 higher than those of HTO in a wide range of target dimensions of biological interest. The results are consistent with radiobiological findings that OBT is about twice as effective as HTO. In this study, the same calculations were performed for (60)Co gamma rays in a wide range of target dimensions of biological interest (10 nm to 2 µm). Compared with (60)Co gamma rays, the estimated relative biological effectiveness could vary from 1.3 to 3.5 for HTO, and 2.3 to 5.6 for OBT. The results are consistent with radiobiological findings for various biological endpoints in different biological systems that OBT is about twice as effective as HTO.

  2. Hair removal.

    Science.gov (United States)

    Haedersdal, Merete; Haak, Christina S

    2011-01-01

    Hair removal with optical devices has become a popular mainstream treatment that today is considered the most efficient method for the reduction of unwanted hair. Photothermal destruction of hair follicles constitutes the fundamental concept of hair removal with red and near-infrared wavelengths suitable for targeting follicular and hair shaft melanin: normal mode ruby laser (694 nm), normal mode alexandrite laser (755 nm), pulsed diode lasers (800, 810 nm), long-pulse Nd:YAG laser (1,064 nm), and intense pulsed light (IPL) sources (590-1,200 nm). The ideal patient has thick dark terminal hair, white skin, and a normal hormonal status. Currently, no method of lifelong permanent hair eradication is available, and it is important that patients have realistic expectations. Substantial evidence has been found for short-term hair removal efficacy of up to 6 months after treatment with the available systems. Evidence has been found for long-term hair removal efficacy beyond 6 months after repetitive treatments with alexandrite, diode, and long-pulse Nd:YAG lasers, whereas the current long-term evidence is sparse for IPL devices. Treatment parameters must be adjusted to patient skin type and chromophore. Longer wavelengths and cooling are safer for patients with darker skin types. Hair removal with lasers and IPL sources are generally safe treatment procedures when performed by properly educated operators. However, safety issues must be addressed since burns and adverse events do occur. New treatment procedures are evolving. Consumer-based treatments with portable home devices are rapidly evolving, and presently include low-level diode lasers and IPL devices. Copyright © 2011 S. Karger AG, Basel.

  3. Heat Exchanger Design Options and Tritium Transport Study for the VHTR System

    Energy Technology Data Exchange (ETDEWEB)

    Chang H. Oh; Eung S. Kim

    2008-09-01

    This report presents the results of a study conducted to consider heat exchanger options and tritium transport in a very high temperature reactor (VHTR) system for the Next Generation Nuclear Plant Project. The heat exchanger options include types, arrangements, channel patterns in printed circuit heat exchangers (PCHE), coolant flow direction, and pipe configuration in shell-and-tube designs. Study considerations include: three types of heat exchanger designs (PCHE, shell-and-tube, and helical coil); single- and two-stage unit arrangements; counter-current and cross flow configurations; and straight pipes and U-tube designs in shell-and-tube type heat exchangers. Thermal designs and simple stress analyses were performed to estimate the heat exchanger options, and the Finite Element Method was applied for more detailed calculations, especially for PCHE designs. Results of the options study show that the PCHE design has the smallest volume and heat transfer area, resulting in the least tritium permeation and greatest cost savings. It is theoretically the most reliable mechanically, leading to a longer lifetime. The two-stage heat exchanger arrangement appears to be safer and more cost effective. The recommended separation temperature between first and second stages in a serial configuration is 800oC, at which the high temperature unit is about one-half the size of the total heat exchanger core volume. Based on simplified stress analyses, the high temperature unit will need to be replaced two or three times during the plant’s lifetime. Stress analysis results recommend the off-set channel pattern configuration for the PCHE because stress reduction was estimated at up to 50% in this configuration, resulting in a longer lifetime. The tritium transport study resulted in the development of a tritium behavior analysis code using the MATLAB Simulink code. In parallel, the THYTAN code, previously performed by Ohashi and Sherman (2007) on the Peach Bottom data, was revived

  4. Tritium release from neutron irradiated beryllium: Kinetics, long-time annealing and effect or crack formation

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe, (Germany)

    1995-09-01

    Since beryllium is considered as one of the best neutron multiplier materials in the blanket of the next generation fusion reactors, several studies have been started to evaluate its behaviour under irradiation during both operating and accidental conditions. Based on safety considerations, tritium produced in beryllium during neutron irradiation represents one important issue, therefore it is necessary to investigate tritium transport processes by using a comprehensive mathematical model and comparing its predictions with well characterized experimental tests. Because of the difficulties in extrapolating the short-time tritium release tests to a longer time scale, also long-time annealing experiments with beryllium samples from the SIBELIUS irradiation. have been carried out at the Forschungszentrum Karlsruhe. Samples were annealed up to 12 months at temperatures up to 650{degrees}C. The inventory after annealing was determined by heating the samples up to 1050{degrees}C with a He+0.1 vo1% H{sub 2} purge gas. Furthermore, in order to investigate the likely effects of cracks formation eventually causing a faster tritium release from beryllium, the behaviour of samples irradiated at low temperature (40-50{degrees}C) but up to very high fast neutron fluences (0.8-3.9{center_dot}10{sup 22} cm{sup -2}, E{sub n}{ge}1 MeV) in the BR2 reactor has been investigated. Tritium was released by heating the beryllium samples up to 1050{degrees}C and purging them with He+0.1 vo1% H{sub 2}. Tritium release from high-irradiated beryllium samples showed a much faster kinetics than from the low-irradiated ones, probably because of crack formation caused by thermal stresses in the brittle material and/or by helium bubbles migration. The obtained experimental data have been compared with predictions of the code ANFIBE with the goal to better understand the physical mechanisms governing tritium behaviour in beryllium and to assess the prediction capabilities of the code.

  5. Feedback on the radiological management of a urban site contaminated with tritium

    Energy Technology Data Exchange (ETDEWEB)

    Leprieur, F.; Pierrard, O. [Institut de radioportection et de surete nucleaire - IRSN (France)

    2014-07-01

    Introduction: In November 2010, the IRSN is reached on a rare case of environmental tritium contamination on a site located in an urban area near Paris (Saint-Maur-des-Fosses - dpt 94). This contamination resulted from the presence in an enterprise's premises of an experimental device containing molecular sieve from the Valduc nuclear site, wrongly considered as un-used. First actions: IRSN has quickly performed an initial characterization of tritium contamination in the premises of the company and its close environment. The first results showed the existence of a strong local contamination (tritium activity> 150 000 Bq/m{sup 3} in air) and a important labeling in samples collected in the close vicinity of the company premises (between 1000 and 10000 Bq/kg f.w. in plants, between 500 and 1500 Bq/L in water). These results led IRSN to conduct multiple investigations: - tritium measurements on samples of water, air and plants collected in the area close to the building to know the importance and extent of environmental marking and follow its evolution over time. In this aim, 450 measurements were made between 2010 and 2013; - measurements of tritium in the urine of residents living near the contaminated building: the results showed traces of tritium for some of them but the assessments conducted by the IRSN from these results led to extremely low dosimetry estimates without consequences for the health of these people; - dosimetric evaluations of tritium exposure of employees and visitors of the company contaminated. Informing the public and stakeholders In November 2010, IRSN has collaborated with the mayor to facilitate early interventions in urban areas and in particular to facilitate contacts for access to private property. In this perspective, the IRSN participated in public meetings to explain the cause of this accident and the results of tritium measurements to residents. IRSN also published regularly on its web site briefing notes reflecting the results

  6. The requirement for proper storage of nuclear and related decommissioning samples to safeguard accuracy of tritium data.

    Science.gov (United States)

    Kim, Daeji; Croudace, Ian W; Warwick, Phillip E

    2012-04-30

    Large volumes of potentially tritium-contaminated waste materials are generated during nuclear decommissioning that require accurate characterisation prior to final waste sentencing. The practice of initially determining a radionuclide waste fingerprint for materials from an operational area is often used to save time and money but tritium cannot be included because of its tendency to be chemically mobile. This mobility demands a specific measurement for tritium and also poses a challenge in terms of sampling, storage and reliable analysis. This study shows that the extent of any tritium redistribution during storage will depend on its form or speciation and the physical conditions of storage. Any weakly or moderately bound tritium (e.g. adsorbed water, waters of hydration or crystallisation) may be variably lost at temperatures over the range 100-300 °C whereas for more strongly bound tritium (e.g. chemically bound or held in mineral lattices) the liberation temperature can be delayed up to 800 °C. For tritium that is weakly held the emanation behaviour at different temperatures becomes particularly important. The degree of (3)H loss and cross-contamination that can arise after sampling and before analysis can be reduced by appropriate storage. Storing samples in vapour tight containers at the point of sampling, the use of triple enclosures, segregating high activity samples and using a freezer all lead to good analytical practice. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. Isotope exchange reactions on ceramic breeder materials and their effect on tritium inventory

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, M.; Baba, A. [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering; Kawamura, Y.; Nishi, M.

    1998-03-01

    Though lithium ceramic materials such as Li{sub 2}O, LiAlO{sub 2}, Li{sub 2}ZrO{sub 3}, Li{sub 2}TiO{sub 3} and Li{sub 4}SiO{sub 4} are considered as breeding materials in the blanket of a D-T fusion reactor, the release behavior of the bred tritium in these solid breeder materials has not been fully understood. The isotope exchange reaction rate between hydrogen isotopes in the purge gas and tritium on the surface of breeding materials have not been quantified yet, although helium gas with hydrogen or deuterium is planned to be used as the blanket purge gas in the recent blanket designs. The mass transfer coefficient representing the isotope exchange reaction between H{sub 2} and D{sub 2}O or that between D{sub 2} and H{sub 2}O in the ceramic breeding materials bed is experimentally obtained in this study. Effects of isotope exchange reactions on the tritium inventory in the bleeding blanket is discussed based on data obtained in this study where effects of diffusion of tritium in the grain, absorption of water in the bulk of grain, and adsorption of water on the surface of grain, together with two types of isotope exchange reactions are considered. The way to estimate the tritium inventory in a Li{sub 2}ZrO{sub 3} blanket used in this study shows a good agreement with data obtained in such in-situ experiments as MOZART, EXOTIC-5, 6 and TRINE experiments. (author)

  8. Hydrogeology and tritium transport in Chicken Creek Canyon,Lawrence Berkeley National Laboratory, Berkeley, California

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, Preston D.; Javandel, Iraj

    2007-10-31

    This study of the hydrogeology of Chicken Creek Canyon wasconducted by the Environmental Restoration Program (ERP) at LawrenceBerkeley National Laboratory (LBNL). This canyon extends downhill fromBuilding 31 at LBNL to Centennial Road below. The leading edge of agroundwater tritium plume at LBNL is located at the top of the canyon.Tritium activities measured in this portion of the plume during thisstudy were approximately 3,000 picocuries/liter (pCi/L), which issignificantly less than the maximum contaminant level (MCL) for drinkingwaterof 20,000 pCi/L established by the Environmental ProtectionAgency.There are three main pathways for tritium migration beyond theLaboratory s boundary: air, surface water and groundwater flow. Thepurpose of this report is to evaluate the groundwater pathway.Hydrogeologic investigation commenced with review of historicalgeotechnical reports including 35 bore logs and 27 test pit/trench logsas well as existing ERP information from 9 bore logs. This was followedby field mapping of bedrock outcrops along Chicken Creek as well asbedrock exposures in road cuts on the north and east walls of the canyon.Water levels and tritium activities from 6 wells were also considered.Electrical-resistivity profiles and cone penetration test (CPT) data werecollected to investigate the extent of an interpreted alluvial sandencountered in one of the wells drilled in this area. Subsequent loggingof 7 additional borings indicated that this sand was actually anunusually well-sorted and typically deeply weathered sandstone of theOrinda Formation. Wells were installed in 6 of the new borings to allowwater level measurement and analysis of groundwater tritium activity. Aslug test and pumping tests were also performed in the wellfield.

  9. Drought Assessment Using Tritium River Water Measurements for Existing Dam Infrastructure in the Ishikari River basin, Japan

    Science.gov (United States)

    Gusyev, M.; Morgenstern, U.; Stewart, M. K.; Yamazaki, Y.; Kashiwaya, K.; Kuribayashi, D.; Sawano, H.; Iwami, Y.

    2015-12-01

    A proposed methodology is based on estimated groundwater volumes from tritium river water measurements in the Ishikari River basin of Hokkaido Island, Japan. In our drought assessment, we characterize a groundwater storage that is available and can be used for the water supply during prolonged droughts. For the groundwater storage estimation, we utilized tritium river water measurements obtained during baseflows to estimate water mean transit times (MTTs). Tritium is ideally suited for characterization of the catchment's responses in river water samples with MTTs times up to 200 years. Tritium is a component of meteoric water, decays with a half-life of 12.32 years, and is inert in the subsurface. In Hokkaido, river water samples were collected in June, July and October 2014 at selected river gauging stations operated by the Ministry of Land, Infrastructure, Transport and Tourism (MLIT). These stations record hourly water levels, have catchment areas between 45 and 377 km2 and are located upstream of MLIT dams at altitudes between 36 m and 860 m MSL. The measured tritium ranged between 4.065 TU (±0.07) and 5.290 TU (±0.09) with both lowest and highest tritium values analysed in June river samples at Tougeshita and Okukatsura stations, respectively. For the MTT estimation, we selected exponential(80%)-piston(20%) Lumped Parameter Model (LPM) with constructed tritium in Hokkaido precipitation and obtained a non-unique fit of young (1-11 years) and old (16-98 years) groundwater MTTs. This result indicates that the bomb-peak tritium is still present in Japanese groundwater and may take several years to flush out. From the MTTs and baseflow discharges, the calculated groundwater volume ranges between 13 MCM and 12500 MCM and indicates potentially available groundwater storage during prolonged droughts in the Hokkaido headwater catchments. In the future studies, the accuracy of the estimated groundwater volume can be increased by conducting another tritium sampling at

  10. Estimating subsurface water volumes and transit times in Hokkaido river catchments, Japan, using high-accuracy tritium analysis

    Science.gov (United States)

    Gusyev, Maksym; Yamazaki, Yusuke; Morgenstern, Uwe; Stewart, Mike; Kashiwaya, Kazuhisa; Hirai, Yasuyuki; Kuribayashi, Daisuke; Sawano, Hisaya

    2015-04-01

    The goal of this study is to estimate subsurface water transit times and volumes in headwater catchments of Hokkaido, Japan, using the New Zealand high-accuracy tritium analysis technique. Transit time provides insights into the subsurface water storage and therefore provides a robust and quick approach to quantifying the subsurface groundwater volume. Our method is based on tritium measurements in river water. Tritium is a component of meteoric water, decays with a half-life of 12.32 years, and is inert in the subsurface after the water enters the groundwater system. Therefore, tritium is ideally suited for characterization of the catchment's responses and can provide information on mean water transit times up to 200 years. Only in recent years has it become possible to use tritium for dating of stream and river water, due to the fading impact of the bomb-tritium from thermo-nuclear weapons testing, and due to improved measurement accuracy for the extremely low natural tritium concentrations. Transit time of the water discharge is one of the most crucial parameters for understanding the response of catchments and estimating subsurface water volume. While many tritium transit time studies have been conducted in New Zealand, only a limited number of tritium studies have been conducted in Japan. In addition, the meteorological, orographic and geological conditions of Hokkaido Island are similar to those in parts of New Zealand, allowing for comparison between these regions. In 2014, three field trips were conducted in Hokkaido in June, July and October to sample river water at river gauging stations operated by the Ministry of Land, Infrastructure, Transport and Tourism (MLIT). These stations have altitudes between 36 m and 860 m MSL and drainage areas between 45 and 377 km2. Each sampled point is located upstream of MLIT dams, with hourly measurements of precipitation and river water levels enabling us to distinguish between the snow melt and baseflow contributions

  11. Organic getter materials for the removal of hydrogen and its isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Smith, H.M.; Shepodd, T.J.; Gilliom, L.R.

    1990-08-01

    Herein, we describe hydrogen getter technologies developed at SNL and KCD over the past decade. The technologies are based on the irreversible removal of hydrogen by catalytic hydrogenation of unsaturated organic compounds. Different types have been developed: crystalline getters, dialkynes combined with heterogeneous catalysts; and a polymeric getter, a thermoplastic elastomer capable of reacting with hydrogen in the presence of oxygen without producing water. These materials can remove up to 300 cc (STP) of hydrogen per gram of material, and can maintain atmospheres of less than 10 ppM hydrogen. Crystalline getters for tritium and the combination hydrogen(tritium), water, and oxygen are described. The accumulation of hydrogen is usually an undesired event. Large leaks from hydrogen storage and handling facilities pose explosion hazards. Small amounts of hydrogen that may build up in sealed containers after long storage times can damage integral components. Any tritium leak is an immediate health hazard. Hydrogen scavengers or getters can avert all of these potential problems by irreversibly removing hydrogen from such environments. In this paper, we describe the development of two types of organic getters: the first is a new crystalline getter, based on 1,4-bis(phenylethynyl)benzene{sup 5} (DEB); the second is a polymeric hydrogen getter, based on styrene-butadiene copolymer.

  12. Modeling the Removal of Xenon from Lithium Hydrate with Aspen HYSYS

    Science.gov (United States)

    Efthimion, Phillip; Gentile, Charles

    2011-10-01

    The Laser Inertial Fusion Engine (LIFE) project mission is to provide a long-term, carbon-free source of sustainable energy, in the form of electricity. A conceptual xenon removal system has been modeled with the aid of Aspen HYSYS, a chemical process simulator. Aspen HYSYS provides excellent capability to model chemical flow processes, which generates outputs which includes specific variables such as temperature, pressure, and molar flow. The system is designed to strip out hydrogen isotopes deuterium and tritium. The base design bubbles plasma exhaust laden with x filled with liquid helium. The system separates the xenon from the hydrogen, deuterium, and tritium with a lithium hydrate and a lithium bubbler. After the removal of the hydrogen and its isotopes, the xenon is then purified by way of the process of cryogenic distillation. The pure hydrogen, deuterium, and tritium are then sent to the isotope separation system (ISS). The removal of xenon is an integral part of the laser inertial fusion engine and Aspen HYSYS is an excellent tool to calculate how to create pure xenon.

  13. PERMCAT experiments with tritium at high helium flow rates relevant for the tritium extraction systems using the CAPER facility at TLK

    Energy Technology Data Exchange (ETDEWEB)

    Bükki-Deme, András, E-mail: andras.buekki-deme@kit.edu; Demange, David; Le, Thanh-Long; Fanghänel, Eleonore; Simon, Karl-Heinz

    2016-11-01

    Highlights: • We examined PERMCAT reactor efficiency processing tritiated water at high Helium carrier flow rates. • We have found that – as expected from previous studies – that the swamping ratio (ratio between the impurity and purge side flow rates) has a key effect on the decontamination factors. • On the other hand, some rather unexpected effects tend to show that the limiting phenomena of such specific operation of PERMCAT reactors (at high impurity flow rates, thus short residence time) lies on the kinetics of the isotope exchange reactions. - Abstract: Experiments are still necessary to consolidate the processes retained for the Tritium Extraction Systems of the European ITER Test Blanket Modules (TBM). A PERMCAT reactor combines a catalyst promoting isotope exchange reactions and a Pd/Ag membrane allowing tritium recovery from complex gaseous mixtures containing tritium in different chemical forms. Originally developed for the Tokamak Exhaust Processing, the PERMCAT process is also candidate to detritiate the water arising from an adsorption column installed in the TBM ancillary systems. We discuss the results of an extensive experimental campaign using a PERMCAT reactor to process Q{sub 2}O containing impurity gas mixtures at high flow rates. Two different experimental configurations were studied, namely PERMCAT stand-alone, and PERMCAT in combination with a zeolite molecular sieve bed (MSB, previously loaded with Q{sub 2}O) under regeneration. On the one hand, many expected behaviors were observed, such as the key influence of the swamping ratio (ratio between the impurity and purge side flow rates) on the decontamination factors. On the other hand, some rather unexpected effects tend to show that the limiting phenomena of such specific operation of PERMCAT reactors (at high flow rates, thus short residence time) lies on the kinetics of the isotope exchange reactions.

  14. Experimental setup for the determination of exchangeable hydrogen in environmental samples using deuterium and tritium

    Energy Technology Data Exchange (ETDEWEB)

    Pastor, L.; Siclet, F. [EDF R et D (France); Peron, O.; Gegout, C.; Montavon, G.; Landesman, C. [Laboratoire SUBATECH, IN2P3/CNRS, EMN, Universite de Nantes (France); Fourre, E.; Jean-Baptiste, P. [LSCE, UMR 8112 CEA-CNRS-UVSQ/IPSL (France)

    2014-07-01

    Tritium ({sup 3}H or T) is a radioactive isotope of the element hydrogen with a half-life of 12.32 yrs. It is naturally produced in the upper atmosphere, but also by the nuclear industry. It is used in many fields like medical research and watch making. It is thus released in the environment on gaseous and liquid form by these facilities and is currently the major released radionuclide in liquid effluent from French nuclear power plants (in HTO form). Current studies dealing with the fate and behavior of tritium in the environment focus mainly on its organic form, i.e. the organically bound tritium (OBT). It is indeed more resilient in the environment than the tritiated water (HTO) as it is part of the organic matter cycle. There is nevertheless a distinction to be made between the exchangeable and the non-exchangeable fraction of OBT. When hydrogen is linked to nitrogen, sulfur or oxygen, it is considered to be exchangeable with the H contained in the surrounding solution or in the atmospheric water phase. Thus, its residence time within the molecule will be reduced and closely linked to the surrounding parameters. When hydrogen is linked to carbon, it is assumed that the link is more stable and thus the residence time in the molecule will be enhanced. It is thus important to know the fraction of exchangeable OBT when addressing the residence time of tritium in the environment. The present study aims at assessing this fraction in different environmental matrixes using deuterium and/or tritium. Compared to several others studies on exchangeable hydrogen where experiments were conducted at high temperature and/or high pressure, this study follows a different approach with experiments conducted at ambient temperature and atmospheric pressure (natural conditions) with a controlled hygrometric value within the system. The system itself consists in a glove box modified to fulfill the requirements for an efficient control on the experimental parameters (temperature

  15. Milk removal

    OpenAIRE

    Ferneborg, Sabine

    2016-01-01

    Milk from dairy cows is a staple dietary component for humans all over the world. Regardless of whether milk is consumed in its purest, unaltered form or as high-end products such as fine cheese or ice cream, it needs to be of high quality when taken from the cow, produced at a low price and produced in a system that consider aspects such as animal health, animal welfare and sustainability. This thesis investigated the role of milk removal and the importance of residual milk on milk yield...

  16. WBN-1 Cycle 10 TPBAR Tritium Release, Deduced From Analysis of RCS Data TTP-1-3046-00, Rev 0

    Energy Technology Data Exchange (ETDEWEB)

    Shaver, Mark W.; Niehus, Mark T.; Love, Edward F.

    2012-02-19

    This document contains the calculation of the TPBAR tritium release from the Mark 9.2 design TPBARs irradiated in WBN cycle 10. The calculation utilizes the generalized cycle analysis methodology given in TTP-1-3045 Rev. 0.

  17. Structure, tritium depth profile and desorption from ‘plasma-facing’ beryllium materials of ITER-Like-Wall at JET

    Directory of Open Access Journals (Sweden)

    E. Pajuste

    2017-08-01

    Experimental results revealed that > 95% of the tritium was localized in the top 30 – 45µm of the ‘plasma-facing’ surface, however, possible tritium presence up to 100µm cannot be excluded. During temperature programmed desorption at 4.8K/min in the flow of purge gas He+ 0.1% H2 the tritium release started below 475K, the most intense release occurred at 725 – 915K and the degree of detritiation of > 91% can be obtained upon reaching 1075K. The total tritium activity in the samples was in range of 2 – 32kilo Becquerel per square centimetre of the plasma-facing surface area.

  18. 2014 Accomplishments-Tritium aging studies on stainless steel: Fracture toughness properties of forged stainless steels-Effect of hydrogen, forging strain rate, and forging temperature

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Michael J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-02-01

    Forged stainless steels are used as the materials of construction for tritium reservoirs. During service, tritium diffuses into the reservoir walls and radioactively decays to helium-3. Tritium and decay helium cause a higher propensity for cracking which could lead to a tritium leak or delayed failure of a tritium reservoir. The factors that affect the tendency for crack formation and propagation include: Environment; steel type and microstructure; and, vessel configuration (geometry, pressure, residual stress). Fracture toughness properties are needed for evaluating the long-term effects of tritium on their structural properties. Until now, these effects have been characterized by measuring the effects of tritium on the tensile and fracture toughness properties of specimens fabricated from experimental forgings in the form of forward-extruded cylinders. A key result of those studies is that the long-term cracking resistance of stainless steels in tritium service depends greatly on the interaction between decay helium and the steels’ forged microstructure. New experimental research programs are underway and are designed to measure tritium and decay helium effects on the cracking properties of stainless steels using actual tritium reservoir forgings instead of the experimental forgings of past programs. The properties measured should be more representative of actual reservoir properties because the microstructure of the specimens tested will be more like that of the tritium reservoirs. The programs are designed to measure the effects of key forging variables on tritium compatibility and include three stainless steels, multiple yield strengths, and four different forging processes. The effects on fracture toughness of hydrogen and crack orientation were measured for type 316L forgings. In addition, hydrogen effects on toughness were measured for Type 304L block forgings having two different yield strengths. Finally, fracture toughness properties of type 304L

  19. On monitoring the tritium breeder in a lead-lithium cooled ceramic breeder (LLCB) module of the ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kapyshev, V., E-mail: kapyshev@nikiet.ru [Federal State Unitary Enterprise ' Dollezhal Research and Development Institute of Power Engineering' , PO Box 788, Moscow 101000 (Russian Federation); Kartashev, I.; Kovalenko, V.; Leshukov, A.; Poliksha, V.; Rasmerov, A.; Strebkov, Yu.; Yukhnov, N.; Vladimirova, N. [Federal State Unitary Enterprise ' Dollezhal Research and Development Institute of Power Engineering' , PO Box 788, Moscow 101000 (Russian Federation)

    2012-08-15

    The operation of a tritium breeder is a most process among engineering problems of DEMO. In this study, a design for monitoring tritium-breeding in the reactor is discussed. Additionally, a system for the experimental estimation of the tritium-breeding ratio (TBR) and the tritium-breeding dynamics in a lead-lithium cooled ceramic breeder (LLCB) test module used in the ITER is proposed. The systems are based on tritium and neutron-flux measurements under the ITER plasma D-T experiments and the use of lithium ortho-silicate and lithium carbonate samples and neutron detectors. Different lithum-6 and lithium-7 isotope contents in the samples are used to measure neutron spectrum. The samples and detectors are delivered in containers to the test breeder module (TBM) on a monitor channel connecting the TBM to an operating zone of the ITER. The tritium content in the samples is measured in a laboratory by the liquid scintillation method. Pneumatic control is used to deliver the samples to the TBM and to extract the samples using the channel during plasma-operational pauses. Neutron calculation is performed to estimate the tritium content in the samples and the heat distribution in the materials of the channel under reactor irradiation. A measurement accuracy of the tritium content in the carbonate and orthosilicate samples can attain a level of 7% and 10%, respectively. The results of the channel-cooling calculation performed under the nominal operating conditions of the TBM (a plasma pulse) are presented in the paper.

  20. Non-intrusive measurement of tritium activity in waste drums by modelling a {sup 3}He leak quantified by mass spectrometry; Mesure non intrusive de l'activite de futs de dechets trities par modelisation d'une fuite {sup 3}He et sa quantification par spectrometrie de masse

    Energy Technology Data Exchange (ETDEWEB)

    Demange, D

    2002-07-03

    This study deals with a new method that makes it possible to measure very low tritium quantities inside radioactive waste drums. This indirect method is based on measuring the decaying product, {sup 3}He, and requires a study of its behaviour inside the drum. Our model considers {sup 3}He as totally free and its leak through the polymeric joint of the drum as two distinct phenomena: permeation and laminar flow. The numerical simulations show that a pseudo-stationary state takes place. Thus, the {sup 3}He leak corresponds to the tritium activity inside the drum but it appears, however, that the leak peaks when the atmospheric pressure variations induce an overpressure in the drum. Nevertheless, the confinement of a drum in a tight chamber makes it possible to quantify the {sup 3}He leak. This is a non-intrusive measurement of its activity, which was experimentally checked by using reduced models, representing the drum and its confinement chamber. The drum's confinement was optimised to obtain a reproducible {sup 3}He leak measurement. The gaseous samples taken from the chamber were purified using selective adsorption onto activated charcoals at 77 K to remove the tritium and pre-concentrate the {sup 3}He. The samples were measured using a leak detector mass spectrometer. The adaptation of the signal acquisition and the optimisation of the analysis parameters made it possible to reach the stability of the external calibrations using standard gases with a {sup 3}He detection limit of 0.05 ppb. Repeated confinement of the reference drums demonstrated the accuracy of this method. The uncertainty of this non-intrusive measurement of the tritium activity in 200-liter drums is 15% and the detection limit is about 1 GBq after a 24 h confinement. These results led to the definition of an automated tool able to systematically measure the tritium activity of all storage waste drums. (authors)

  1. Parametric analysis of LIBRETTO-4 and 5 in-pile tritium transport model on EcosimPro

    Energy Technology Data Exchange (ETDEWEB)

    Alcalde, Pablo Martínez, E-mail: pablomiguel.martinez@externos.ciemat.es [Universidad Nacional de Educación a Distancia (UNED), c/Juan del Rosal 12, 28040 Madrid (Spain); Moreno, Carlos; Ibarra, Ángel [CIEMAT, Avda. Complutense 40, 28040 Madrid (Spain)

    2014-10-15

    Highlights: • Introduction of a new tritium transport model of LIBRETTO-4 and 5 on EcosimPro{sup ®}. • Analysis of model input parameter and variable sensitivities and effects on tritium simulated fluxes. • Demonstrations of high tritium out-flux dependencies on lead-lithium parameters. • Rough fitting achievements proposed by Li17Pb solubility or recombination increase. - Abstract: A new model for LIBRETTO-4/1, 4/2 and 5 experiments have been developed on ECOSIMPro{sup ©} tool to simulate tritium in-pile breeding and transport into two separate purge gas channels with He + 0.1%H{sub 2}. Release from lead lithium eutectic plenum with coupled permeation through an austenitic steel wall on the first and single permeation through EUROFER-97 in the temperature ranges of 300–550 °C can be simulated tuning the transport parameters involved. A parametric study has been performed to reduce the degrees of freedom and to determine the error caused in the simulation due to the uncertainty in experimental input data. The information obtained is essential for the experimental benchmarking. The Tritium Permeation Percentage (TPP) is an output calculated parameter with low variations between 2 and 6% along the whole experimental time easy to compare (730 Full Power Days for LIBRETTO-4 and 520 for 5). Tritium transport parameter ranges verifying this output are defined herein.

  2. [Study on Tritium Content in Soil at Sites of Nuclear Explosions on the Territory of Semipalatinsk Test Site].

    Science.gov (United States)

    Timonova, L V; Lyakhova, O N; Lukashenko, S N; Aidarkhanov, A O

    2015-01-01

    As a result of investigations carried out on the territory of Semipalatinsk Test Site, tritium was found in different environmental objects--surface and ground waters, vegetation, air environment, and snow cover. The analysis of the data obtained has shown that contamination of environmental objects at the Semipalatinsk Test Site with tritium is associated with the places where underground nuclear tests were performed. Since tritium can originate from an activation reaction and be trapped by pock particles during a test, it was decided to examine the soil in the sites where surface and excavation tests took place. It was found that the concentration of tritium in soil correlates with the concentration of europium. Probably, the concentration of tritium in the soil depends on the character and yield of the tests performed. Findings of the study have revealed that tritium can be found in soil in significant amounts not only in sites where underground nuclear tests took place but also in sites where surface and excavation nuclear tests were carried out.

  3. Tissue-specific incorporation and genotoxicity of different forms of tritium in the marine mussel, Mytilus edulis.

    Science.gov (United States)

    Jaeschke, Benedict C; Millward, Geoffrey E; Moody, A John; Jha, Awadhesh N

    2011-01-01

    Marine mussels (Mytilus edulis) were exposed to seawater spiked with tritiated water (HTO) at a dose rate of 122 and 79 μGy h(-1) for 7 and 14 days, respectively, and tritiated glycine (T-Gly) at a dose rate of 4.9 μGy h(-1) over 7 days. This was followed by depuration in clean seawater for 21 days. Tissues (foot, gills, digestive gland, mantle, adductor muscle and byssus) and DNA extracts from tissues were analysed for their tritium activity concentrations. All tissues demonstrated bio-accumulation of tritium from HTO and T-Gly. Tritium from T-Gly showed increased incorporation into DNA compared to HTO. About 90% of the initial activity from HTO was depurated within one day, whereas T-Gly was depurated relatively slowly, indicating that tritium may be bound with different affinities in tissues. Both forms of tritium caused a significant induction of micronuclei in the haemocytes of mussels. Our findings identify significant differential impacts on Mytilus edulis of the two chemical forms of tritium and emphasise the need for a separate classification and control of releases of tritiated compounds, to adequately protect the marine ecosystem. Copyright © 2010 Elsevier Ltd. All rights reserved.

  4. EFFECTS OF TRITIUM GAS EXPOSURE ON THE GLASS TRANSITION TEMPERATURE OF EPDM ELASTOMER AND ON THE CONDUCTIVITY OF POLYANILINE

    Energy Technology Data Exchange (ETDEWEB)

    Clark, E; Marie Kane, M

    2008-12-12

    Four formulations of EPDM (ethylene-propylene diene monomer) elastomer were exposed to tritium gas initially at one atmosphere and ambient temperature for between three and four months in closed containers. Material properties that were characterized include density, volume, mass, appearance, flexibility, and dynamic mechanical properties. The glass transition temperature was determined by analysis of the dynamic mechanical property data per ASTM standards. EPDM samples released significant amounts of gas when exposed to tritium, and the glass transition temperature increased by about 3 C. during the exposure. Effects of ultraviolet and gamma irradiation on the surface electrical conductivity of two types of polyaniline films are also documented as complementary results to planned tritium exposures. Future work will determine the effects of tritium gas exposure on the electrical conductivity of polyaniline films, to demonstrate whether such films can be used as a sensor to detect tritium. Surface conductivity was significantly reduced by irradiation with both gamma rays and ultraviolet light. The results of the gamma and UV experiments will be correlated with the tritium exposure results.

  5. Protection of the primary circuits and effect on the design of the inner deuterium/tritium fuel cycle of ITER

    Energy Technology Data Exchange (ETDEWEB)

    Glugla, M. [Forschungszentrum Karlsruhe, Tritium Laboratory, P.O. Box 3640, D 76021 Karlsruhe (Germany)]. E-mail: manfred.glugla@hvt.fzk.de; Caldwell-Nichols, C. [Forschungszentrum Karlsruhe, Tritium Laboratory, P.O. Box 3640, D 76021 Karlsruhe (Germany); Cristescu, I.R. [Forschungszentrum Karlsruhe, Tritium Laboratory, P.O. Box 3640, D 76021 Karlsruhe (Germany); Doerr, L. [Forschungszentrum Karlsruhe, Tritium Laboratory, P.O. Box 3640, D 76021 Karlsruhe (Germany); Hellriegel, G. [Forschungszentrum Karlsruhe, Tritium Laboratory, P.O. Box 3640, D 76021 Karlsruhe (Germany); Laesser, R. [EFDA CSU, MPI fuer Plasmaphysik, Boltzmannstr. 2, D 85748 Garching (Germany); Murdoch, D. [EFDA CSU, MPI fuer Plasmaphysik, Boltzmannstr. 2, D 85748 Garching (Germany); Schaefer, P. [Forschungszentrum Karlsruhe, Tritium Laboratory, P.O. Box 3640, D 76021 Karlsruhe (Germany)

    2005-11-15

    The confinement of tritium within its respective processing systems is clearly one of the most important safety objectives for fusion reactors. Consequently, the functional safety of all the subsystems of the inner deuterium/tritium fuel cycle of ITER need to be carefully analyzed and the results implemented into the design of the Tritium Plant as a whole. The basic principles for the management of functional safety are laid out in the international standard IEC 61508. The tritium bearing systems need to be particularly protected against over-pressure and over-temperature, even at levels significantly below values at which sensors or components would loose their mechanical integrity. The design shall take into account the necessity to validate and test the protection measures, noting the contamination of the equipment with tritium and the restricted access due to multiple barriers. Any protection measure has its characteristic but limited credibility. Software based safeguarding, for example, is not fully satisfactory in certain cases. In spite of the developments in software and the increasing possibilities to assure its quality, hard-wired signal processing is still considered to be necessary within the ITER Tritium Plant.

  6. Test of CAP88-PC's Predicted Concentrations of Tritium in Air at Lawrence Livermore National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, S R

    2003-11-06

    Based on annual tritium release rates from the five sources of tritium at Lawrence Livermore National Laboratory and the Tritium Research Laboratory at Sandia National Laboratory, the regulatory dispersion and dose model, CAP88-PC, was used to predict tritium concentrations in air at perimeter and offsite air surveillance monitoring locations for 1986 through 2001. These predictions were compared with mean annual measured concentrations, based on biweekly sampling. Deterministic predictions were compared with deterministic observations using predicted-to-observed ratios. In addition, the uncertainty on observations and predictions was assessed: when the uncertainty bounds of the observations overlapped with the uncertainty bounds of the predictions, the predictions were assumed to agree with the observations with high probability. Deterministically, 54% of all predictions were higher than the observations, and 96% fell within a factor of three. Accounting for uncertainty, 75% of all predictions agreed with the observations; 87% of the predictions either matched or exceeded the observations. Predictions equaled or exceeded observations at those sampling locations towards which the wind blows most frequently, except those in the hills. Under-predictions were seen at locations towards which the wind blows infrequently when released tritium was from elevated sources. When a high fraction of tritium was from area (diffuse) sources, predictions matched observations.

  7. Oxidation of zirconium alloys in 2.5 kPa water vapor for tritium readiness.

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Bernice E.

    2007-11-01

    A more reactive liner material is needed for use as liner and cruciform material in tritium producing burnable absorber rods (TPBAR) in commercial light water nuclear reactors (CLWR). The function of these components is to convert any water that is released from the Li-6 enriched lithium aluminate breeder material to oxide and hydrogen that can be gettered, thus minimizing the permeation of tritium into the reactor coolant. Fourteen zirconium alloys were exposed to 2.5 kPa water vapor in a helium stream at 300 C over a period of up to 35 days. Experimental alloys with aluminum, yttrium, vanadium, titanium, and scandium, some of which also included ternaries with nickel, were included along with a high nitrogen impurity alloy and the commercial alloy Zircaloy-2. They displayed a reactivity range of almost 500, with Zircaloy-2 being the least reactive.

  8. Wavelet approach to search for sterile neutrinos in tritium β -decay spectra

    Science.gov (United States)

    Mertens, S.; Dolde, K.; Korzeczek, M.; Glueck, F.; Groh, S.; Martin, R. D.; Poon, A. W. P.; Steidl, M.

    2015-02-01

    Sterile neutrinos in the mass range of a few keV are candidates for both cold and warm dark matter. An admixture of a heavy neutrino mass eigenstate to the electron neutrino would result in a minuscule distortion—a kink—in a β -decay spectrum. In this paper we show that a wavelet transform is a very powerful shape analysis method to detect this signature. For a tritium source strength, similar to what is expected from the KATRIN experiment, a statistical sensitivity to active-to-sterile neutrino mixing down to sin2θ =1 0-6 (90% C.L.) can be obtained after three years of measurement time. It is demonstrated that the wavelet approach is largely insensitive to systematic effects that result in smooth spectral modifications. To make full use of this analysis technique a high-resolution measurement (FWHM of ˜100 eV ) of the tritium β -decay spectrum is required.

  9. Tritium processing and containment technology for fusion reactors. Annual report, July 1975--June 1976

    Energy Technology Data Exchange (ETDEWEB)

    Maroni, V A; Calaway, W F; Misra, B; Van Deventer, E H; Weston, J R; Yonco, R M; Cafasso, F A; Burris, L

    1976-01-01

    The hydrogen permeabilities of selected metals, alloys, and multiplex preparations that are of interest to fusion reactor technology are being characterized. A high-vacuum hydrogen-permeation apparatus has been constructed for this purpose. A program of studies has been initiated to develop design details for the tritium-handling systems of near-term fusion reactors. This program has resulted in a better definition of reactor-fuel-cycle and enrichment requirements and has helped to identify major research and development problems in the tritium-handling area. The design and construction of a 50-gallon lithium-processing test loop (LPTL) is well under way. Studies in support of this project are providing important guidance in the selection of hardware for the LPTL and in the design of a molten-salt processing test section.

  10. Estimation of air tritium concenration around Wolsung NPP site using a Lagrangian atmopsheric dispersion model

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M. C.; Lee, K. B.; Song, Y. I. [KAERI, Taejon (Korea, Republic of); Kim, K. N. [KEPCO, Seoul (Korea, Republic of)

    1998-10-01

    A Lagrangian atmospheric dispersion model(K-LADM) combining a three dimensional sea-land breeze model has been developed and applied to the estimation of the quaterly and the annual averaged air tritium concentration around Wolsung NPP site. The estimated concentrations were compared with the observed concentration data. The results showed that the present Lagrangian Atmospheric dispersion model(K-LADM) provided very good agreement with the observations.

  11. Safety analysis report -- Packages LP-50 tritium package (Packaging of fissile and other radioactive materials)

    Energy Technology Data Exchange (ETDEWEB)

    Gates, A.A.; McCarthy, P.G.; Edl, J.W.; Chalfant, G.G. (comps.); Cadelli, G.

    1975-05-01

    Elemental tritium is shipped at low pressure in a stainless steel container (LP-50) surrounded by an aluminum vessel and Celotex insulation at least 4 in. thick in a steel drum. Each package contains a large quantity (greater than a Type A quantity) of nonfissile material, as defined in AECM 0529. This report provides the details of the safety analysis performed for this type container.

  12. Intercomparison run for uranium and tritium determination in urine samples, organised by Nuclear Regulatory Authority, Argentina

    CERN Document Server

    Serdeiro, N H; Equillor, H E

    2003-01-01

    The Nuclear Regulatory Authority (ARN), Argentina, has carried out an intercomparison run for tritium and uranium determination in urine, in November 2002. The aim of this exercise was to assess the performance of the laboratories that usually inform these radionuclides and to provide technical support in order to have an appropriate occupational monitoring in vitro. In the present work, the results of the intercomparison and the assessment of each laboratory are published.

  13. Analysis of a Partial MOX Core Design with Tritium Targets for Light Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Anistratov, Dmitriy Y. [Texas A & M Univ., College Station, TX (United States); Adams, Marvin L. [Texas A & M Univ., College Station, TX (United States)

    1998-04-19

    This report constitutes tangible and verifiable deliverable associated with the task To study the effects of using WG MOX fuel in tritium-producing LWR” of the subproject Water Reactor Options for Disposition of Plutonium. The principal investigators of this subproject are Naeem M. Abdurrahman of the University of Texas at Austin and Marvin L. Adams of Texas A&M University. This work was sponsored by the Amarillo National Resource Center for Plutonium.

  14. Improvements to sample processing and measurement to enable more widespread environmental application of tritium

    Energy Technology Data Exchange (ETDEWEB)

    Moran, James; Alexander, Thomas; Aalseth, Craig; Back, Henning; Mace, Emily; Overman, Cory; Seifert, Allen; Freeburg, Wilcox

    2017-08-01

    Previous measurements have demonstrated the wealth of information that tritium (T) can provide on environmentally relevant processes. We present modifications to sample preparation approaches that enable T measurement by proportional counting on small sample sizes equivalent to 120 mg of water and demonstrate the accuracy of these methods on a suite of standardized water samples. This enhanced method should provide the analytical flexibility needed to address persistent knowledge gaps in our understanding of T behavior in the environment.

  15. [Solid state isotope hydrogen exchange for deuterium and tritium in human gene-engineered insulin].

    Science.gov (United States)

    Zolotarev, Yu A; Dadayan, A K; Kozik, V S; Gasanov, E V; Nazimov, I V; Ziganshin, R Kh; Vaskovsky, B V; Murashov, A N; Ksenofontov, A L; Haribin, O N; Nikolaev, E N; Myasoedov, N F

    2014-01-01

    The reaction of high temperature solid state catalytic isotope exchange in peptides and proteins under the action of catalyst-activated spillover hydrogen was studied. The reaction of human gene-engineered insulin with deuterium and tritium was conducted at 120-140° C to produce insulin samples containing 2-6 hydrogen isotope atoms. To determine the distribution of the isotope label over tritium-labeled insulin's amino acid residues, oxidation of the S-S bonds of insulin by performic acid was performed and polypeptide chains isolated; then their acid hydrolysis, amino acid analysis and liquid scintillation counts of tritium in the amino acids were conducted. The isotope label was shown to be incorporated in all amino acids of the protein, with the peptide fragment FVNQHLCGSHLVE of the insulin β-chain showing the largest incorporation. About 45% of the total protein isotope label was incorporated in His5 and His10 of this fragment. For the analysis of isotope label distribution in labeled insulin's peptide fragments, the recovery of the S-S bonds by mercaptoethanol, the enzymatic hydrolysis by glutamyl endopeptidase from Bacillus intermedius and HPLC division of the resulting peptides were carried out. Attribution of the peptide fragments formed due to hydrolysis at the Glu-X bond in the β-chain was accomplished by mass spectrometry. Mass spectrometry analysis data of the deuterium-labeled insulin samples' isotopomeric composition showed that the studied solid state isotope exchange reaction equally involved all the protein molecules. Biological studying of tritium-labeled insulin showed its physiological activity to be completely retained.

  16. Cellular responses to tritium exposure in rainbow trout: HTO- and OBT-spiked feed exposure experiments

    Energy Technology Data Exchange (ETDEWEB)

    Festarini, A.; Shultz, C.; Stuart, M.; Kim, S.B., E-mail: amy.festarini@cnl.ca [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada); Ferreri, C. [National Research Council of Italy, Dept. of Chemical Sciences and Materials Technologies, Bologna (Italy)

    2016-06-15

    Biological effects were evaluated in rainbow trout (Oncorhynchus mykiss) exposed to tritiated water (HTO) or food spiked with organically bound tritium (OBT). An HTO exposure study was conducted using a tritium activity concentration of 7000 Bq/L, and an OBT exposure study was conducted using a tritium activity concentration of 30 000 Bq/L. Following 140 days of in vivo HTO exposure, liver, heart, spleen, kidney, and brain cells did not show statistically significant differences in viability; kidney, liver, and spleen cells did not show significant differences in DNA double-strand break repair activity compared with control cells. Membrane fatty acid composition analysis was conducted on liver cells and no effects of HTO exposure could be detected. Following 140 days of in vivo OBT exposure, viability and DNA double-strand break repair activity were not statistically different from controls in liver, heart, spleen, kidney, and brain cells. Changes, however, were noted in the fatty acid composition of liver and muscle tissues. For both studies, all measurements were performed on each tissue and on a fraction of the same tissue that was exposed to a gamma 4 Gy dose in vitro to test for adaptive responses, and no effects were observed except for fatty acid composition. The findings demonstrated that membrane fatty acid composition is a sensitive marker and that microscopic evaluation of gamma-H2AX foci is more sensitive than the flow cytometric approach. These studies are the first to correlate uptake and depuration with biological health indicators in edible fish for tritium exposures within worldwide drinking water guidelines. (author)

  17. Cryogenic tritium-hydrogen-deuterium and deuterium-tritium layer implosions with high density carbon ablators in near-vacuum hohlraums

    Energy Technology Data Exchange (ETDEWEB)

    Meezan, N. B., E-mail: meezan1@llnl.gov; Hopkins, L. F. Berzak; Pape, S. Le; Divol, L.; MacKinnon, A. J.; Döppner, T.; Ho, D. D.; Jones, O. S.; Khan, S. F.; Ma, T.; Milovich, J. L.; Pak, A. E.; Ross, J. S.; Thomas, C. A.; Benedetti, L. R.; Bradley, D. K.; Celliers, P. M.; Clark, D. S.; Field, J. E.; Haan, S. W. [Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, California 94551-0808 (United States); and others

    2015-06-15

    High Density Carbon (or diamond) is a promising ablator material for use in near-vacuum hohlraums, as its high density allows for ignition designs with laser pulse durations of <10 ns. A series of Inertial Confinement Fusion (ICF) experiments in 2013 on the National Ignition Facility [Moses et al., Phys. Plasmas 16, 041006 (2009)] culminated in a deuterium-tritium (DT) layered implosion driven by a 6.8 ns, 2-shock laser pulse. This paper describes these experiments and comparisons with ICF design code simulations. Backlit radiography of a tritium-hydrogen-deuterium (THD) layered capsule demonstrated an ablator implosion velocity of 385 km/s with a slightly oblate hot spot shape. Other diagnostics suggested an asymmetric compressed fuel layer. A streak camera-based hot spot self-emission diagnostic (SPIDER) showed a double-peaked history of the capsule self-emission. Simulations suggest that this is a signature of low quality hot spot formation. Changes to the laser pulse and pointing for a subsequent DT implosion resulted in a higher temperature, prolate hot spot and a thermonuclear yield of 1.8 × 10{sup 15} neutrons, 40% of the 1D simulated yield.

  18. Atmospheric tritium concentrations under influence of AREVA NC La Hague reprocessing plant (France) and background levels.

    Science.gov (United States)

    Connan, O; Hébert, D; Solier, L; Maro, D; Pellerin, G; Voiseux, C; Lamotte, M; Laguionie, P

    2017-10-01

    In-air tritium measurements were conducted around the AREVA NC La Hague reprocessing plant, as well as on other sites that are not impacted by the nuclear industry in northwest of France. The results indicate that the dominant tritium form around the AREVA site is HT (86%). HT and HTO levels are lower than 5 and 1 Bq. m-3 for hourly samples taken in the plume. No tritiated organic molecules (TOM) were detected. 26 measurement campaigns were performed and links were established between near-field 85Kr, HT and HTO activities. Environmental measurements are in line with those taken at the discharge stack, and tend to demonstrate that there are no rapid changes in the tritium forms released. Out of the influence of any nuclear activities, the levels measured were below 13 mBq.m-3 for HT and 5 mBq.m-3 for HTO (<0.5 Bq. L-1). HTO level in air seems to be influenced by HTO activities in surrounding seawater. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Tritium permeation in the heat exchanger for nuclear hydrogen development and demonstration reactor

    Energy Technology Data Exchange (ETDEWEB)

    Yook, Dae Sik; Lee, Kun Jai [Korea Advanced Institute of Science and Technology, Taejeon (Korea, Republic of)

    2006-11-15

    The Korea Atomic Energy Research Institute (KAERI) has studied to develop a Nuclear Hydrogen Development and Demonstration(NHDD) reactor which are high temperature gas cooled reactor since 2004. Tritium which is generated by fission and neutron reaction will be diffused to the primary He coolant. Because the main purpose of this reactor is to produce the hydrogen gas, tritium permeation from the primary coolant to the hydrogen production system through the heat exchanger is an important problem. In the previous study. It seems to be probable that tritium permeates a second IHX of iodine-sulfer process(IS) which is the hydrogen production process and mixes in hydrogen as a product. For the IHX, the effectiveness must be no lower than 90%, and for the recuperator, it is 95%. To limit the size, the compact heat exchangers are the attractive solution to the IHX design. In this study, Incoloy 800 is assumed to be used as a constructing material for the IHX because of its high strength and corrosion resistance properties in the presence of high-temperature water or steam.

  20. Neutronic analyses of design issues affecting the tritium breeding performance in different DEMO blanket concepts

    Energy Technology Data Exchange (ETDEWEB)

    Pereslavtsev, Pavel, E-mail: pavel.pereslavtsev@kit.edu [Karlsruhe Institute for Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Bachmann, Christian [EUROfusion – Programme Management Unit, Boltzmannstrasse 2, 85748 Garching (Germany); Fischer, Ulrich [Karlsruhe Institute for Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2016-11-01

    Highlights: • Realistic 3D MCNP model based on the CAD engineering model of DEMO. • Automated procedure for the generation and arrangement of the blanket modules for different DEMO concepts: HCPB, HCLL, WCLL, DCLL. • Several parameters affecting tritium breeding ratio (TBR) were investigated. • A set of practical guidelines was prepared for the designers developing the individual breeding blanket concepts. - Abstract: Neutronic analyses were performed to assess systematically the tritium breeding ratio (TBR) variations in the DEMO for the different blanket concepts HCPB, HCLL, WCLL and DCLL DEMOs due to modifications of the blanket configurations. A dedicated automated procedure was developed to fill the breeding modules in the common generic model in correspondence to the different concepts. The TBR calculations were carried out using the MCNP5 Monte Carlo code. The following parameters affecting the global TBR were investigated: TBR poloidal distribution, radial breeder zone depth, {sup 6}Li enrichment, steel content in the breeder modules, poloidal segmentation of the breeder blanket volume, size of gaps between blankets, thickness of the first wall and of the tungsten armour. Based on the results a set of practical guidelines was prepared for the designers developing the individual breeding blanket concepts with the goal to achieve the required tritium breeding performance in DEMO.

  1. Control of tritium in FFHR-2 self-cooled Flibe blanket

    Energy Technology Data Exchange (ETDEWEB)

    Fukada, Satoshi [Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, Hakozaki, Higashi-ku, Fukuoka 812-8581 (Japan)]. E-mail: sfukada@nucl.kyushu-u.ac.jp; Morisaki, Akio [Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, Hakozaki, Higashi-ku, Fukuoka 812-8581 (Japan); Sagara, Akio [Reactor Engineering Research Center, National Institute of Fusion Sciences, Oroshi-cho, Toki 509-5292 (Japan); Terai, Takayuki [Department of Nuclear Engineering and Management, University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)

    2006-02-15

    The application of Flibe (2LiF + BeF{sub 2} mixed molten salt) to a blanket material of force-free helical reactor (FFHR-2) was discussed based on our recent experiments on redox control of Flibe by Be and on hydrogen permeation through Flinak (0.465LiF + 0.115NaF + 0.42 KF mixed molten salt) as a fluid simulant of Flibe. The two experimental works were carried out under the collaboration work of JUPITER-II. To maintain Flibe in the blanket loop under reduction condition is a key issue to transform TF to T{sub 2} with a fast reaction rate. In order to achieve that, proper rates of Be dissolution and reduction reaction of TF to T{sub 2} in Flibe have to be established in the self-cooled blanket. The overall material balance of tritium in the FFHR-2 system was discussed in terms of the tritium permeation through Flibe and the tritium recovery rate.

  2. Relative biological effectiveness of tritium for induction of myeloid leukemia in CBA/H mice

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J.R. [Battelle Pacific Northwest Labs., Health Protection Branch, Health Div., Richland, WA (United States); Myers, D.K.; Jackson, J.S.; Dunford, D.W.; Gragtmans, N.J.; Wyatt, H.M.; Jones, A.R. [Atomic Energy of Canada Limited, Chalk River, Ontairo (Canada); Percy, D.H. [Univ. of Guelph, Ontario Veterinary College, Guelph, Ontario (Canada)

    1995-07-01

    To help resolve uncertainties as to the most appropriate weighting factor for tritium {beta} rays, a large experiment was carried out to measure the relative biological effectiveness (RBE) of tritiated water compared to X rays for the induction of myeloid leukemia in male mice of the CBA/H strain. The study was designed to estimate the lifetime incidence of myeloid leukemia in seven groups of about 750 mice each; radiation exposures were approximately 0, 1, 2 and 3 Gy both for tritiated water and for X rays. The lifetime incidence of leukemia in these mice increased from 0.13% in the control group to 6-8% in groups exposed to higher radiation doses. The results were fitted to various equations relating leukemia incidence to radiation dose, using both the raw data and data corrected for cumulative mouse-days at risk. The calculated RBE values for tritium 13 rays compared to X rays ranged from 1.0 {+-} 0.5 to 1.3 {+-} 0.3. A best estimate of the RBE for this experiment was about 1.2 {+-} 0.3. A w{sub R} value of 1 would thus appear to be more appropriate than a W{sub R} of 2 for tritium {beta} rays. (author)

  3. Relative biological effectiveness of tritium for induction of myeloid leukemia in CBA/H mice.

    Science.gov (United States)

    Johnson, J R; Myers, D K; Jackson, J S; Dunford, D W; Gragtmans, N J; Wyatt, H M; Jones, A R; Percy, D H

    1995-10-01

    To help resolve uncertainties as to the most appropriate weighting factor for tritium beta rays, a large experiment was carried out to measure the relative biological effectiveness (RBE) of tritiated water compared to X rays for the induction of myeloid leukemia in male mice of the CBA/H strain. The study was designed to estimate the lifetime incidence of myeloid leukemia in seven groups of about 750 mice each; radiation exposures were approximately 0, 1, 2 and 3 Gy both for tritiated water and for X rays. The lifetime incidence of leukemia in these mice increased from 0.13% in the control group to 6-8% in groups exposed to higher radiation doses. The results were fitted to various equations relating leukemia incidence to radiation dose, using both the raw data and data corrected for cumulative mouse-days at risk. The calculated RBE values for tritium beta rays compared to X rays ranged from 1.0 +/- 0.5 to 1.3 +/- 0.3. A best estimate of the RBE for this experiment was about 1.2 +/- 0.3. A wR value of 1 would thus appear to be more appropriate than a wR of 2 for tritium beta rays.

  4. Tritium sorption behavior on the percolation of tritiated water into a soil packed bed

    Energy Technology Data Exchange (ETDEWEB)

    Furuichi, Kazuya, E-mail: kfuruichi@aees.kyushu-u.ac.jp [Department of Advanced Energy Engineering, Kyushu University, 6-1, Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan); Katayama, Kazunari; Date, Hiroyuki [Department of Advanced Energy Engineering, Kyushu University, 6-1, Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan); Takeishi, Toshiharu [Factory of Engineering, Kyushu University, 744 Motooka Nishi-ku, Fukuoka 819-0395 (Japan); Fukada, Satoshi [Department of Advanced Energy Engineering, Kyushu University, 6-1, Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan)

    2016-11-01

    Highlights: • We establish the permeation model of tritiated water in the soil layer. • Saturated hydraulic conductivity of water in soil was gained by using the model. • The isotope exchange reaction coefficient was good agreement with experimental data. - Abstract: Development of tritium transport model in natural soil is an important issue from a viewpoint of safety of fusion reactors. The spill of a large amount of tritiated water to the environment is a concern accident because huge tritiated water is handled in a fusion plant. In this work, a simple tritium transport model was proposed based on the tritium transport model in porous materials. The overall mass transfer coefficient representing isotope exchange reaction between tritiated water and structural water in soil particles was obtained by numerically analyzing the result of the percolation experiment of tritiated water into the soil packed bed. Saturated hydraulic conductivity in the natural soil packed bed was obtained to be 0.033 mm/s. By using this value, the overall mass transfer capacity coefficients representing the isotope exchange reaction between tritiated water percolating through the packed bed and overall structural water on soil particles was determined to be 6.0 × 10{sup −4} 1/s. This value is much smaller than the mass transfer capacity coefficient between tritiated water vapor and water on concrete material and metals.

  5. A Hydrogen Exchange Method Using Tritium and Sephadex: Its Application to Ribonuclease*

    Science.gov (United States)

    Englander, S. Walter

    2012-01-01

    A new method for measuring the hydrogen exchange of macromolecules in solution is described. The method uses tritium to trace the movement of hydrogen, and utilizes Sephadex columns to effect, in about 2 minutes, a separation between tritiated macromolecule and tritiated solvent great enough to allow the measurement of bound tritium. High sensitivity and freedom from artifact is demonstrated and the possible value of the technique for investigation of other kinds of colloid-small molecule interaction is indicated. Competition experiments involving tritium, hydrogen, and deuterium indicate the absence of any equilibrium isotope effect in the ribonuclease-hydrogen isotope system, though a secondary kinetic isotope effect is apparent when ribonuclease is largely deuterated. Ribonuclease shows four clearly distinguishable kinetic classes of exchangeable hydrogens. Evidence is marshaled to suggest the independently measurable classes II, III, and IV (in order of decreasing rate of exchange) to represent “random-chain” peptides, peptides involved in α-helix, and otherwise shielded side-chain and peptide hydrogens, respectively. PMID:14075117

  6. Search for an admixture of sterile neutrino in the electron spectrum from tritium $\\beta$-decay

    CERN Document Server

    Abdurashitov, D; Likhovid, N; Lokhov, A; Tkachev, I; Yants, V

    2014-01-01

    We propose an experiment intended for search for an admixture of sterile neutrino with mass m$_s$ in the range of 1-8 keV that may be detected as specific distortion of the electron energy spectrum during tritium decay. The distortion is spread over large part of the spectrum so to reveal it one can use a detector with relatively poor (near 10-15%) energy resolution. A classic proportional counter is a simple natural choice for a tritium $\\beta$-decay detector. The method we are proposing is original in two respects. First, the counter is produced as a whole from fully-fused quartz tube allowing to measure current pulse directly from anode while providing high stability for a long time. Second, a modern digital acquisition technique can be used in measurements at ultrahigh count rate - up to 10$^6$ Hz. As a result an energy spectrum of tritium electrons containing up to 10$^{12}$ counts may be collected in a month of live time measurements. Due to high statistics an upper limit down to 10$^{-3}$..10$^{-5}$ ca...

  7. Neutron yield when fast deuterium ions collide with strongly charged tritium-saturated dust particles

    Energy Technology Data Exchange (ETDEWEB)

    Akishev, Yu. S., E-mail: akishev@triniti.ru; Karal’nik, V. B.; Petryakov, A. V.; Starostin, A. N.; Trushkin, N. I.; Filippov, A. V. [State Research Center of Russian Federation, Troitsk Institute for Innovation and Thermonuclear Research (Russian Federation)

    2017-02-15

    The ultrahigh charging of dust particles in a plasma under exposure to an electron beam with an energy up to 25 keV and the formation of a flux of fast ions coming from the plasma and accelerating in the strong field of negatively charged particles are considered. Particles containing tritium or deuterium atoms are considered as targets. The calculated rates of thermonuclear fusion reactions in strongly charged particles under exposure to accelerated plasma ions are presented. The neutron generation rate in reactions with accelerated deuterium and tritium ions has been calculated for these targets. The neutron yield has been calculated when varying the plasma-forming gas pressure, the plasma density, the target diameter, and the beam electron current density. Deuterium and tritium-containing particles are shown to be the most promising plasmaforming gas–target material pair for the creation of a compact gas-discharge neutron source based on the ultrahigh charging of dust particles by beam electrons with an energy up to 25 keV.

  8. In situ spatial organization of Potato virus A coat protein subunits as assessed by tritium bombardment.

    Science.gov (United States)

    Baratova, L A; Efimov, A V; Dobrov, E N; Fedorova, N V; Hunt, R; Badun, G A; Ksenofontov, A L; Torrance, L; Järvekülg, L

    2001-10-01

    Potato virus A (PVA) particles were bombarded with thermally activated tritium atoms, and the intramolecular distribution of the label in the amino acids of the coat protein was determined to assess their in situ steric accessibility. This method revealed that the N-terminal 15 amino acids of the PVA coat protein and a region comprising amino acids 27 to 50 are the most accessible at the particle surface to labeling with tritium atoms. A model of the spatial arrangement of the PVA coat protein polypeptide chain within the virus particle was derived from the experimental data obtained by tritium bombardment combined with predictions of secondary-structure elements and the principles of packing alpha-helices and beta-structures in proteins. The model predicts three regions of tertiary structure: (i) the surface-exposed N-terminal region, comprising an unstructured N terminus of 8 amino acids and two beta-strands, (ii) a C-terminal region including two alpha-helices, as well as three beta-strands that form a two-layer structure called an abCd unit, and (iii) a central region comprising a bundle of four alpha-helices in a fold similar to that found in tobacco mosaic virus coat protein. This is the first model of the three-dimensional structure of a potyvirus coat protein.

  9. Tritium and heat management in ITER Test Blanket Systems port cell for maintenance operations

    Energy Technology Data Exchange (ETDEWEB)

    Giancarli, L.M., E-mail: luciano.giancarli@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Cortes, P.; Iseli, M.; Lepetit, L.; Levesy, B. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Livingston, D. [Frazer-Nash Consultancy Ltd., Stonebridge House, Dorking Business Park, Dorking, Surrey RH4 1HJ (United Kingdom); Nevière, J.C. [Comex-Nucleaire, 13115 Saint Paul Lez Durance (France); Pascal, R. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Ricapito, I. [Fusion for Energy, Josep Pla, 2, Torres Diagonal Litoral B3, Barcelona E-08019 (Spain); Shu, W. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Wyse, S. [Frazer-Nash Consultancy Ltd., Stonebridge House, Dorking Business Park, Dorking, Surrey RH4 1HJ (United Kingdom)

    2014-10-15

    Highlights: •The ITER TBM Program is one of the ITER missions. •We model a TBM port cell with CFD to optimize the design choices. •The heat and tritium releases management in TBM port cells has been optimized. •It is possible to reduce the T-concentration below one DAC in TBM port cells. •The TBM port cells can have human access within 12 h after shutdown. -- Abstract: Three ITER equatorial port cells are dedicated to the assessment of six different designs of breeding blankets, known as Test Blanket Modules (TBMs). Several high temperature components and pipework will be present in each TBM port cell and will release a significant quantity of heat that has to be extracted in order to avoid the ambient air and concrete wall temperatures to exceed allowable limits. Moreover, from these components and pipes, a fraction of the contained tritium permeates and/or leaks into the port cell. This paper describes the optimization of the heat extraction management during operation, and the tritium concentration control required for entry into the port cell to proceed with the required maintenance operations after the plasma shutdown.

  10. Tritium records to trace stratospheric moisture inputs in Antarctica along with stable water isotopes and other tracers

    Science.gov (United States)

    Fourré, Elise; Landais, Amaëlle; Cauquoin, Alexandre; Jean-Baptiste, Philippe; Petit, Jean-Robert

    2017-04-01

    Tritium is one of the very few proxies which can document the stratospheric-tropospheric exchange. In fact natural tritium (3H) is mainly produced in the stratosphere by spallation and rapidly enters the water cycle in the form of tritiated water molecules HTO. Due to the high content of H2O in the troposphere compared to the stratosphere, the present-day tritium content of the stratosphere is 105 times the tropospheric one. HTO concentration in precipitation can thus be related to stratospheric moisture input. Apart from being a key region for climate studies, the East Antarctica Plateau with its low water pressure and precipitation is especially sensitive to stratospheric inputs enriched in tritium. In turn, tritium concentrations in East Antarctica snow should ideally be used to assess the dynamics of stratosphere - troposphere exchanges, but tritium data are very sparse. In this study, we present high resolution measurements of tritium concentration over the last 50 years at the Vostok station from three different snow pits: this allows us to identify similar cyclic interannual pattern despite stratigraphic noise. For one of the pits, stable water isotopes including 17O-excess, sodium concentration, as well 10Be have been measured on the very same samples [1,2]. As for tritium, variations in 10Be are modulated by the production under the influence of solar activity and partly by the stratospheric inputs, but once produced 10Be becomes attached to ambient aerosols and are transported and deposited with them. At Vostok, a possible link between 17O-excess and stratospheric moisture inputs variability has also been suggested [2]. We explore the correlations between these different tracers to confirm the link with stratospheric moisture inputs and to investigate the mechanisms at play in relation with the climatic conditions. In this aim, confrontation with modeling outputs [3] from the LMDZ Atmospheric General Circulation Model enhanced with both stable water

  11. Chemical form of released tritium from molten Li{sub 2}BeF{sub 4} salt under neutron irradiation at elevated temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Akihiro; Terai, Takayuki; Yoneoka, Toshiaki; Tanaka, Satoru [Tokyo Univ. (Japan). Faculty of Engineering

    1996-10-01

    Chemical forms of released tritium from FLIBE (the 2:1 mixture of LiF and BeF{sub 2}) by in-pile tritium release experiment were HT and TF and their proportion depended on the chemical composition of purge gas and the dehumidification time of specimen at high temperatures. The chemical form of tritium was determined by the thermodynamic equilibrium of the isotopic exchange reaction (T{sup +} + H{sub 2} {yields} H{sup +} + HT). (author)

  12. Transportation risk assessment for the shipment of irradiated FFTF tritium target assemblies from the Hanford Site to the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, D. L.

    1997-11-19

    A Draft Technical Information Document (HNF-1855) is being prepared to evaluate proposed interim tritium and medical isotope production at the Fast Flux Test Facility (FFTF). This report examines the potential health and safety impacts associated with transportation of irradiated tritium targets from FFTF to the Savannah River Site for processing at the Tritium Extraction Facility. Potential risks to workers and members of the public during normal transportation and accident conditions are assessed.

  13. Optimization of tritium breeding and shielding analysis to plasma in ITER fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Indah Rosidah, M., E-mail: indah.maymunah@gmail.com; Suud, Zaki, E-mail: szaki@fi.itb.ac.id [Department of Nuclear Physics, Faculty of Mathematic and Natural Sciences, Institut Teknologi Bandung (Indonesia); Yazid, Putranto Ilham [Research and Development of Nuclear Association (Indonesia)

    2015-09-30

    The development of fusion energy is one of the important International energy strategies with the important milestone is ITER (International Thermonuclear Experimental Reactor) project, initiated by many countries, such as: America, Europe, and Japan who agreed to set up TOKAMAK type fusion reactor in France. In ideal fusion reactor the fuel is purely deuterium, but it need higher temperature of reactor. In ITER project the fuels are deuterium and tritium which need lower temperature of the reactor. In this study tritium for fusion reactor can be produced by using reaction of lithium with neutron in the blanket region. With the tritium breeding blanket which react between Li-6 in the blanket with neutron resulted from the plasma region. In this research the material used in each layer surrounding the plasma in the reactor is optimized. Moreover, achieving self-sufficiency condition in the reactor in order tritium has enough availability to be consumed for a long time. In order to optimize Tritium Breeding Ratio (TBR) value in the fusion reactor, there are several strategies considered here. The first requirement is making variation in Li-6 enrichment to be 60%, 70%, and 90%. But, the result of that condition can not reach TBR value better than with no enrichment. Because there is reduction of Li-7 percent when increasing Li-6 percent. The other way is converting neutron multiplier material with Pb. From this, we get TBR value better with the Be as neutron multiplier. Beside of TBR value, fusion reactor can analyze the distribution of neutron flux and dose rate of neutron to know the change of neutron concentration for each layer in reactor. From the simulation in this study, 97% neutron concentration can be absorbed by material in reactor, so it is good enough. In addition, it is required to analyze spectrum neutron energy in many layers in the fusion reactor such as in blanket, coolant, and divertor. Actually material in that layer can resist in high temperature

  14. Water renewal in Montevideo's bay: a two compartments model for tritium kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Suarez-Antola, Roberto, E-mail: rsuarez@ucu.edu.uy [Universidad Catolica del Uruguay (UCU), Montevideo (Uruguay)

    2013-07-01

    During field work about dynamics and renewal of water in Montevideo's Bay, 100 Ci of tritiated water were evenly distributed in the north-east region of the bay, by a continuous injection of a solution, during 5 hours, from a 200 litres tank, using a peristaltic pump. The whole bay was divided in 20 concentration cells, taking into account available bathymetric charts and corrections from field data obtained in situ. Tritium concentrations (activities per unit volume) and other relevant parameters (temperature, electrical conductivity, etc.) were measured in vertical profiles during three weeks, in the mid-point of each cell, first twice a day and the on a daily basis. Remnant total tritium activity was estimated from cells volumes and midpoint cells activity concentrations. Consistency checks were done. A one compartment model was used to estimate a global renewal time of circa 29 hours. However, the details of the measured tritium kinetics, a careful consideration of bathymetric data, water movements in a tidal environment (measured with drogues, fluorescent tracers and current meters), as well as the results of computer fluid dynamics modelling (in depth averaged) suggests that the bay can be meaningfully divided in two main compartments: a North-East and a South-West compartment. The purpose of this paper is threefold: (1) to describe the construction of a two compartments model for water renewal in Montevideo's Bay, (2) to apply experimental data of tritium kinetics to estimate the parameters of the model, and (3) to discuss the validity of the model and its practical applicability. The meaning of the renewal time of each compartment and its relation with the measured tritium kinetics in each cell is discussed. The perturbations in water circulation and renewal produced by civil works already done or the perturbations that could be expected due to civil works to be done, in relation with Montevideo's harbour, is discussed. The tracer model

  15. Optimization of tritium breeding and shielding analysis to plasma in ITER fusion reactor

    Science.gov (United States)

    Indah Rosidah, M.; Suud, Zaki; Yazid, Putranto Ilham

    2015-09-01

    The development of fusion energy is one of the important International energy strategies with the important milestone is ITER (International Thermonuclear Experimental Reactor) project, initiated by many countries, such as: America, Europe, and Japan who agreed to set up TOKAMAK type fusion reactor in France. In ideal fusion reactor the fuel is purely deuterium, but it need higher temperature of reactor. In ITER project the fuels are deuterium and tritium which need lower temperature of the reactor. In this study tritium for fusion reactor can be produced by using reaction of lithium with neutron in the blanket region. With the tritium breeding blanket which react between Li-6 in the blanket with neutron resulted from the plasma region. In this research the material used in each layer surrounding the plasma in the reactor is optimized. Moreover, achieving self-sufficiency condition in the reactor in order tritium has enough availability to be consumed for a long time. In order to optimize Tritium Breeding Ratio (TBR) value in the fusion reactor, there are several strategies considered here. The first requirement is making variation in Li-6 enrichment to be 60%, 70%, and 90%. But, the result of that condition can not reach TBR value better than with no enrichment. Because there is reduction of Li-7 percent when increasing Li-6 percent. The other way is converting neutron multiplier material with Pb. From this, we get TBR value better with the Be as neutron multiplier. Beside of TBR value, fusion reactor can analyze the distribution of neutron flux and dose rate of neutron to know the change of neutron concentration for each layer in reactor. From the simulation in this study, 97% neutron concentration can be absorbed by material in reactor, so it is good enough. In addition, it is required to analyze spectrum neutron energy in many layers in the fusion reactor such as in blanket, coolant, and divertor. Actually material in that layer can resist in high temperature

  16. Water Quality of "Tritium-Dead" Drinking Water Wells in California

    Science.gov (United States)

    Visser, A.; Moran, J. E.; Singleton, M. J.; Hillegonds, D. J.; Kulongoski, J. T.; Belitz, K.; Fram, M. S.; Esser, B. K.

    2011-12-01

    Understanding ambient levels of regulated constituents with predominantly natural sources, such as arsenic and uranium, or with both natural and anthropogenic sources, such as nitrate, salinity and perchlorate, is important for attributing source, assessing susceptibility, and for groundwater basin management. For California, the large database of tritium-helium, noble gas and stable isotope measurements acquired at Lawrence Livermore National Laboratory (LLNL) in support of the State of California Groundwater Ambient Monitoring and Assessment (GAMA) program provides a unique opportunity to assess pre-development groundwater quality. GAMA is administered by the State Water Resources Control Board with USGS and LLNL as technical leads. These data were acquired for the GAMA California Aquifer Susceptibility and Priority Basin projects (http://www.swrcb.ca.gov/gama/; Belitz, 2003, USGS WRIR 03-4166). Groundwater pumped from long-screened wells will have a mixed distribution of travel times since recharge. Model calculations of mixing between tritium-dead recharge water and younger recharge water assuming simple binary, exponential or dispersive age distributions show that, given the historical levels of tritium in precipitation in the pacific coastal region, a threshold of less than 1 pCi/L of tritium is required to ensure that less than 25% of the pumped groundwater recharged after 1950. The low detection limit is necessary because water recharged between 1980 and 1995 contains only 3-4 pCi/L of tritium at present. The use of groundwater for irrigation in agricultural areas can result in recent recharge of tritium-dead water and complicates the identification of pre-development groundwater. Additional parameters including radiogenic helium, stable isotopes, and recharge temperature were studied to confirm the absence of a modern component. Initial results show that pre-development groundwater reflects the various hydrogeochemical settings found in California

  17. Tritium retention measurements by accelerator mass spectrometry and full combustion of W-coated and uncoated CFC tiles from the JET divertor

    Science.gov (United States)

    Stan-Sion, C.; Bekris, N.; Kizane, G.; Enachescu, M.; Likonen, J.; Halitovs, M.; Petre, A.; contributors, JET

    2016-04-01

    Accelerator mass spectrometry (AMS) and the full combustion method (FCM) followed by liquid scintillation counting were applied to quantitatively determine the tritium retention in the tungsten-coated carbon fibre composites (CFC), in comparison to uncoated CFC tiles from the JET divertor. The tiles were adjacent and exposed to plasma operations between 2007 and 2009. The tritium depth profiles are showing that the tritium retention on the W-coated tile was reduced by a factor of 13.5 in comparison to the uncoated tile whereas the bulk tritium concentration is approximately the same for both tiles.

  18. Genotoxic and reprotoxic effects of tritium and external gamma irradiation on aquatic animals.

    Science.gov (United States)

    Adam-Guillermin, Christelle; Pereira, Sandrine; Della-Vedova, Claire; Hinton, Tom; Garnier-Laplace, Jacqueline

    2012-01-01

    Aquatic ecosystems are chronically exposed to natural radioactivity or to artificial radionuclides released by human activities (e.g., nuclear medicine and biology,nuclear industry, military applications). Should the nuclear industry expand in the future, radioactive environmental releases, under normal operating conditions or accidental ones, are expected to increase, which raises public concerns about possible consequences on the environment and human health. Radionuclide exposures may drive macromolecule alterations, and among macromolecules DNA is the major target for ionizing radiations. DNA damage, if not correctly repaired, may induce mutations, teratogenesis, and reproductive effects. As such, damage at the molecular level may have consequences at the population level. In this review, we present an overview of the literature dealing with the effects of radionuclides on DNA, development, and reproduction of aquatic organisms. The review focuses on the main radionuclides that are released by nuclear power plants under normal operating conditions, γ emitters and tritium. Additionally, we fitted nonlinear curves to the dose-response data provided in the reviewed publications and manuscripts, and thus obtained endpoints commonly associated with ecotoxicological studies, such as the EDR(10). These were then used as a common metric for comparing the values and data published in the literature.The effects of tritium on aquatic organisms were reviewed for dose rates that ranged from 29 nGy/day to 29 Gy/day. Although beta emission from tritium decay presents a rather special risk of damage to DNA, genotoxicity-induced by tritium has been scarcely studied. Most of the effects studied have related to reproduction and development. Species sensitivity and the form of tritium present are important factors that drive the ecotoxicity of tritium. We have concluded from this review that invertebrates are more sensitive to the effects of tritium than are vertebrates

  19. A database on tritium behavior in the chronic HT release experiment. 1. Meteorological data and tritium concentrations in air and soil

    Energy Technology Data Exchange (ETDEWEB)

    Noguchi, Hiroshi; Yokoyama, Sumi; Kinouchi, Nobuyuki; Murata, Mikio; Amano, Hikaru; Ando, Mariko [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Fukutani, Satoshi

    1999-03-01<