WorldWideScience

Sample records for wireline formation testing

  1. Wire-line logging analysis of the 2007 JOGMEC/NRCan/Aurora Mallik gas hydrate production test well

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, T.; Takayama, T.; Nakamizu, M.; Yamamoto, K. [Japan Oil, Gas and Metals National Corp., Mihama-ku, Chiba (Japan); Dallimore, S.; Mwenifumbo, J.; Wright, F. [Natural Resources Canada, Sidney, BC (Canada). Geological Survey of Canada; Kurihara, M.; Sato, A. [Japan Oil Engineering Co., Chuo-ku, Tokyo (Japan); Al-Jubori, A. [Schlumberger Canada Ltd., Calgary, AB (Canada)

    2008-07-01

    Japan Oil, Gas and Metals National Corporation and Natural Resources Canada performed a full scale production test in the Mallik field, in Canada's Mackenzie Delta in April, 2007 in order to evaluate the productivity of methane hydrate (MH) by the depressurization method. The program involved an extensive wire-line logging program to evaluate reservoir properties; determine production/water injection intervals; evaluate cement bonding; and, interpret MH dissociation behavior throughout the production. The paper presented a review of the extensive wire-line logging program. It showed the role and workflow of wire-line logging applied in the production well. The well log evaluation for MH bearing zone was the primary focus of the paper. The paper discussed the objectives of the program as well as tools used as part of the study, including several new open hole wire-line logging tools such as magnetic resonance scanner, Rt Scanner, sonic scanner, as well as other advanced logging tools used to obtain data on the occurrence of MH, lithology, MH pore saturation, porosity and permeability. Perforation intervals of the production and water injection zones were selected using a multidisciplinary approach. Candidate test intervals considering lithology, MH pore saturation, initial effective permeability and absolute permeability were identified based on the results of geological interpretation and open hole logging analysis. Reservoir layer models were built to allow for reservoir numerical simulations for several perforation scenarios. Using the results of well log analysis, reservoir numerical simulation, and consideration of operational constraints, a MH bearing formation from 1093 to 1105 mKB was selected for 2007 testing. Three zones were selected for injection of produced water. It was concluded that at the perforation interval of the MH bearing formation (1093-1105 mKB) a selective dissociation was observed in the lateral direction. 20 refs., 3 tabs., 9 figs.

  2. Quantification of Organic richness through wireline logs: a case study of Roseneath shale formation, Cooper basin, Australia

    Science.gov (United States)

    Ahmad, Maqsood; Iqbal, Omer; Kadir, Askury Abd

    2017-10-01

    The late Carboniferous-Middle Triassic, intracratonic Cooper basin in northeastern South Australia and southwestern Queensland is Australia's foremost onshore hydrocarbon producing region. The basin compromises Permian carbonaceous shale like lacustrine Roseneath and Murteree shale formation which is acting as source and reservoir rock. The source rock can be distinguished from non-source intervals by lower density, higher transit time, higher gamma ray values, higher porosity and resistivity with increasing organic content. In current dissertation we have attempted to compare the different empirical approaches based on density relation and Δ LogR method through three overlays of sonic/resistivity, neutron/resistivity and density/resistivity to quantify Total organic content (TOC) of Permian lacustrine Roseneath shale formation using open hole wireline log data (DEN, GR, CNL, LLD) of Encounter 1 well. The TOC calculated from fourteen density relations at depth interval between 3174.5–3369 meters is averaged 0.56% while TOC from sonic/resistivity, neutron/resistivity and density/resistivity yielded an average value of 3.84%, 3.68%, 4.40%. The TOC from average of three overlay method is yielded to 3.98%. According to geochemical report in PIRSA the Roseneath shale formation has TOC from 1 – 5 wt %.There is unpromising correlations observed for calculated TOC from fourteen density relations and measured TOC on samples. The TOC from average value of three overlays using Δ LogR method showed good correlation with measured TOC on samples.

  3. Advanced productivity forecast using petrophysical wireline data calibrated with MDT tests and numerical reservoir simulation

    Energy Technology Data Exchange (ETDEWEB)

    Andre, Carlos de [PETROBRAS, Rio de Janeiro, RJ (Brazil); Canas, Jesus A.; Low, Steven; Barreto, Wesley [Schlumberger, Houston, TX (United States)

    2004-07-01

    This paper describes an integrated and rigorous approach for viscous and middle oil reservoir productivity evaluation using petrophysical models calibrated with permeability derived from mini tests (Dual Packer) and Vertical Interference Tests (VIT) from open hole wire line testers (MDT SLB TM). It describes the process from Dual Packer Test and VIT pre-job design, evaluation via analytical and inverse simulation modeling, calibration and up scaling of petrophysical data into a numerical model, history matching of Dual Packer Tests and VIT with numerical simulation modeling. Finally, after developing a dynamic calibrated model, we perform productivity forecasts of different well configurations (vertical, horizontal and multilateral wells) for several deep offshore oil reservoirs in order to support well testing activities and future development strategies. The objective was to characterize formation static and dynamic properties early in the field development process to optimize well testing design, extended well test (EWT) and support the development strategies in deep offshore viscous oil reservoirs. This type of oil has limitations to flow naturally to surface and special lifting equipment is required for smooth optimum well testing/production. The integrated analysis gave a good overall picture of the formation, including permeability anisotropy and fluid dynamics. Subsequent analysis of different well configurations and lifting schemes allows maximizing formation productivity. The simulation and calibration results are compared to measured well test data. Results from this work shows that if the various petrophysical and fluid properties sources are integrated properly an accurate well productivity model can be achieved. If done early in the field development program, this time/knowledge gain could reduce the risk and maximize the development profitability of new blocks (value of the information). (author)

  4. Operational Review of the First Wireline In Situ Stress Test in Scientific Ocean Drilling

    Directory of Open Access Journals (Sweden)

    Casey Moore

    2012-04-01

    Full Text Available Scientific ocean drilling’s first in situ stress measurement was made at Site C0009A during Integrated Ocean Drilling Program (IODP Expedition 319 as part of Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE Stage 2. The Modular Formation Dynamics Tester (MDT, Schlumbergerwireline logging tool was deployed in riser Hole C0009A to measure in situ formation pore pressure, formation permeability (often reported as mobility=permeability/viscosity, and the least principal stress (S3 at several isolated depths (Saffer et al., 2009; Expedition 319 Scientists, 2010. The importance of in situ stress measurements is not only for scientific interests in active tectonic drilling, but also for geomechanical and well bore stability analyses. Certain in situ tools were not previously available for scientific ocean drilling due to the borehole diameter and open hole limits of riserless drilling. The riser-capable drillship, D/V Chikyu,now in service for IODP expeditions, allows all of the techniques available to estimate the magnitudes and orientations of 3-D stresses to be used. These techniques include downhole density logging for vertical stress, breakout and caliper log analyses for maximum horizontal stress, core-based anelastic strain recovery (ASR, used in the NanTroSEIZE expeditions in 2007–2008, and leak-off test (Lin et al., 2008 and minifrac/hydraulic fracturing (NanTroSEIZE Expedition319 in 2009. In this report, the whole operational planning process related to in situ measurements is reviewed, and lessons learned from Expedition 319 are summarized for efficient planning and testing in the future.

  5. Broadband Wireline Provider Service Summary; BBRI_wirelineSum12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of broadband Internet access in Rhode Island via all wireline technologies assessed by Broadband Rhode Island. Broadband...

  6. Broadband Wireline Provider Service: Other Copper Wireline; BBRI_otherCopper12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via "Other Copper Wireline" technology. In Rhode Island, this category...

  7. Developments in wireline in-situ rock stress measurement

    Energy Technology Data Exchange (ETDEWEB)

    Pedroso, Carlos [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Canas, Jesus A.; Holzberg, Bruno; Gmach, Helmut [Schlumberger Servicos de Petroleo Ltda., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This paper presents recent developments of in-situ stress measurements with wireline tools. The stress measurements are based on the micro hydraulic techniques that can be initialized when an interval is pressurized by pumping fluid until a tensile fracture begins or by packers fracturing (sleeve fracturing). Ultrasonic and Micro-resistivity borehole image logs (before and after the testes) are used as a complement, in order to observe the fractures created by the tests, evaluating the mechanical behavior of the formation. An offshore case study is presented, where shales and tight sandstones at depths deeper than 4500 meters depth were successfully evaluated. A workflow to succeed on stress measurements on such environments is proposed, what includes a planning phase: where breakdown pressures ranges are estimated and compared with the capacity of the tools, a Real Time Monitoring phase, where a decision tree is proposed to help on quick decisions while testing, and an interpretation phase, where appropriate techniques are indicated to evaluate the results. Also, the paper presents the main operational needs to succeed on such environments. Basically, such tests require an entirely software controlled, motorized and modular design tool consisting of dual packer (DP), pump out and flow control modules (Figure 1). These modules were upgraded for the present environment: conditions such as temperatures above 300 deg F, formation pressures above 10,000 psia, very low formation permeability, high pressure differential need and oil based mud (OBM) environment. (author)

  8. Wireline logging tool catalog; 2nd edition

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    This catalog facilitates wireline logging by (1) drawing up programs, (2) showing the adaptation of tools to downhole conditions, drilling fluids, and formations to be measured, and (3) monitoring operations such as recording speeds and calibration control. This edition now represents the tools and services of five additional companies beyond the two companies in the first edition. The participating companies are: BPB Instrument Ltd, Dresser Atlas, Gearhart Geoservices, Micro Log, Prakla Seismos, Schlumberger, and Welex. For quick consultation of the catalog, the tools are classified by ''families.'' For each family of tools, there is a background to the technology and an explanation of the principles of measurement and applications, along with examples of recorded curves. Case documents submitted by service companies include technical data sheets, sketches of tools and their main combinations, and examples of calibration

  9. Wireless and wireline service convergence in next generation optical access networks - the FP7 WISCON project

    DEFF Research Database (Denmark)

    Vegas Olmos, Juan José; Pang, Xiaodan; Lebedev, Alexander

    2014-01-01

    . In this paper, we will present the Marie Curie Framework Program 7 project “Wireless and wireline service convergence in next generation optical access networks” (WISCON), which focuses on the conception and study of novel architectures for wavelength-division-multiplexing (WDM) optical multi-modulation format...... radio-over-fiber (RoF) systems; this is a promising solution to implement broadband seamless wireless -wireline access networks. This project successfully concluded in autumn 2013, and is being follow up by another Marie Curie project entitled “flexible edge nodes for dynamic optical interconnection...

  10. Identification of compartmentalization and Free Water Level using Borehole Images and high Resolution Formation Testing in the Panonian basin

    Science.gov (United States)

    Sőreg, Viktor; Amran, Ahmed; Balogh, József; Tóth, József; Vargáné Tóth, Ilona; Bize, Emmanuel; Bize-Forest, Nadege; Ngallemo, Edmond

    2010-05-01

    Of all the methods used for investigating petroleum reservoirs, Well Testing is of particular interest because it proves reservoir potential and confirms well performance. Well testing involves flowing the well at a control rate and measuring the reservoir response. Conventional well testing is performed in a completed well while high resolution well testing applies to uncompleted well, using wireline technology. This paper describes the use of high technology wireline formation testers to improve reservoir characterization. The Schlumberger formation testing tools (PressureXpress and Modular Reservoir Dynamic Tester) are presented, with applications in geological modeling, drilling, completion and testing optimization as well as formation evaluation. One of the main goal of the study was to identify the gas (oil) saturated layers, to avoid testing unproductive zones. In well K4 utilization of formation tester allowed to point only the potential layers in a sand shale reservoir and a thorough study of these zones has allow the determination of potential reserves. Second successful objective was also to determine eventual compartments in the reservoir, i.e. which reservoir where in the same hydrodynamic system. Last but no least it has allowed an estimation of the free water level. Combination of formation tester with FMI has also helped to visualize the Free Water Level (FWL) in the well, and to determine, in real time, the different points to be tested with XPT. FMI was also of huge benefits in these fractured reservoirs. The determination of free water level and the identification of hydrocarbon saturated layers reduce the cost of completion and conventional testing. Downhole fluid analysis provides a unique solution to the understanding of complex reservoirs. Based on the lessons learned, Improvements have been proposed for future operations.

  11. Active Wireline Heave Compensation for Ocean Drilling

    Science.gov (United States)

    Goldberg, D.; Liu, T.; Swain, K.; Furman, C.; Iturrino, G. J.

    2014-12-01

    The up-and-down heave motion of a ship causes a similar motion on any instruments tethered on wireline cable below it. If the amplitude of this motion is greater than a few tens of cm, significant discrepancy in the depth below the ship is introduced, causing uncertainty in the acquired data. Large and irregular cabled motions also increase the risk of damaging tethered instruments, particularly those with relatively delicate sensors. In 2005, Schlumberger and Deep Down, Inc built an active wireline heave compensator (AHC) system for use onboard the JOIDES Resolution to compensate for heave motion on wireline logging tools deployed in scientific drill holes. The goals for the new AHC system were to (1) design a reliable heave compensation system; and (2) devise a robust and quantitative methodology for routine assessment of compensation efficiency (CE) during wireline operations. Software programs were developed to monitor CE and the dynamics of logging tools in real-time, including system performance under variable parameters such as water depth, sea state, cable length, logging speed and direction. We present the CE results from the AHC system on the JOIDES Resolution during a 5-year period of recent IODP operations and compare the results to those from previous compensation systems deployed during ODP and IODP. Based on new data under heave conditions of ±0.2-2.0 m and water depths of 300-4,800 m in open holes, the system reduces 65-80% of downhole tool displacement under stationary conditions and 50-60% during normal logging operations. Moreover, down/up tool motion at low speeds (300-600 m/h) reduces the system's CE values by 15-20%, and logging down at higher speeds (1,000-1,200 m/h) reduces CE values by 55-65%. Furthermore, the system yields slightly lower CE values of 40-50% without tension feedback of the downhole cable while logging. These results indicate that the new system's compensation efficiency is comparable to or better than previous systems

  12. Application of Formation Testing While Drilling (GeoTap) for acquiring formation pressure data from the Azeri, Chirag and Guneshli wells which were drilled in the Khazarian-Caspian Sea of the Azerbaijan Republic

    Science.gov (United States)

    Amirov, Elnur

    2016-04-01

    A new technology to acquire wireline quality pressure tests using a Logging While Drilling approach has been successfully implemented few years ago in Azeri, Chirag and Guneshli wells which were drilled in the Khazarian-Caspian Sea of the Azerbaijan Republic. The Formation Tester While Drilling tool (GeoTap) uses a testing sequence similar to wireline tools. A single probe is extended to the borehole wall and a small pretest volume withdrawn from the formation. The resulting pressure transient is then analyzed for formation pressure, formation permeability and mobility information. Up-link and down-link capabilities have been added to achieve test control and quality feedback. An efficient downlink algorithm is used downhole to analyze the data. The parameters and pressure data are transmitted to the surface in real-time for continuous monitoring of the test. More detailed pressure data is recorded and retrieved after returning to surface. Use of a quartz gauge allows excellent accuracy. Azeri, Chirag and Guneshli fields consist of layered sand reservoirs alternation with shale sequences and detailed pressure data is acquired on a high percentage of wells in order to understand lateral and vertical continuity of different flow units. The formation tester can be utilized with the 'triple combo' Logging While Drilling string which eliminates the need to rig up wireline on many wells. Wireline formation tester runs are time consuming - particularly if high deviation or high overbalance conditions are encountered requiring pipe conveyed techniques. Non-Productive Time is high when the wireline tools are stuck and fishing operations are required. The Sperry Drilling GeoTap formation pressure tester service provides real-time formation pressure measurements. It bridges the critical gap between drilling safety and optimization, by providing early and reliable measurements of key reservoir properties, while improving reservoir understanding and completion design in real

  13. VT Wireline Broadband Availability by Census Block - 06-2013

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201306 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2013. This...

  14. VT Wireline Broadband Availability by Census Block - 12-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201112 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2011. This...

  15. VT Wireline Broadband Availability by Census Block - 06-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201106 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2011. This...

  16. VT Wireline Broadband Availability by Census Block - 12-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201012 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2010. This...

  17. VT Wireline Broadband Availability by Census Block - 06-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201006 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2010. This...

  18. VT Wireline Broadband Availability by Census Block - 12-2012

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201212 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2012. This...

  19. Auto-Gopher: A Wireline Deep Sampler Driven by Piezoelectric Percussive Actuator and EM Rotary Motor

    Science.gov (United States)

    Badescu, Mircea; Ressa, Aaron; Jae Lee, Hyeong; Bar-Cohen, Yoseph; Sherrit, Stewart; Zacny, Kris; Paulsen, Gale L.; Beegle, Luther; Bao, Xiaoqi

    2013-01-01

    The ability to penetrate subsurfaces and perform sample acquisition at depth of meters may be critical for future NASA in-situ exploration missions to bodies in the solar system, including Mars and Europa. A corer/sampler was developed with the goal of enabling acquisition of samples from depths of several meters where if used on Mars would be beyond the oxidized and sterilized zone. For this purpose, we developed a rotary-hammering coring drill, called Auto-Gopher, which employs a piezoelectric actuated percussive mechanism for breaking formations and an electric motor that rotates the bit to remove the powdered cuttings. This sampler is a wireline mechanism that can be fed into and retrieved from the drilled hole using a winch and a cable. It includes an inchworm anchoring mechanism allowing the drill advancement and weight on bit control without twisting the reeling and power cables. The penetration rate is being optimized by simultaneously activating the percussive and rotary motions of the Auto-Gopher. The percussive mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) mechanism that is driven by piezoelectric stack and that was demonstrated to require low axial preload. The design and fabrication of this device were presented in previous publications. This paper presents the results of laboratory and field tests and lessons learned from this development.

  20. Electrofacies analysis for coal lithotype profiling based on high-resolution wireline log data

    Science.gov (United States)

    Roslin, A.; Esterle, J. S.

    2016-06-01

    The traditional approach to coal lithotype analysis is based on a visual characterisation of coal in core, mine or outcrop exposures. As not all wells are fully cored, the petroleum and coal mining industries increasingly use geophysical wireline logs for lithology interpretation.This study demonstrates a method for interpreting coal lithotypes from geophysical wireline logs, and in particular discriminating between bright or banded, and dull coal at similar densities to a decimetre level. The study explores the optimum combination of geophysical log suites for training the coal electrofacies interpretation, using neural network conception, and then propagating the results to wells with fewer wireline data. This approach is objective and has a recordable reproducibility and rule set.In addition to conventional gamma ray and density logs, laterolog resistivity, microresistivity and PEF data were used in the study. Array resistivity data from a compact micro imager (CMI tool) were processed into a single microresistivity curve and integrated with the conventional resistivity data in the cluster analysis. Microresistivity data were tested in the analysis to test the hypothesis that the improved vertical resolution of microresistivity curve can enhance the accuracy of the clustering analysis. The addition of PEF log allowed discrimination between low density bright to banded coal electrofacies and low density inertinite-rich dull electrofacies.The results of clustering analysis were validated statistically and the results of the electrofacies results were compared to manually derived coal lithotype logs.

  1. Auto-Gopher-II: an autonomous wireline rotary-hammer ultrasonic drill

    Science.gov (United States)

    Badescu, Mircea; Lee, Hyeong Jae; Sherrit, Stewart; Bao, Xiaoqi; Bar-Cohen, Yoseph; Jackson, Shannon; Chesin, Jacob; Zacny, Kris; Paulsen, Gale L.; Mellerowicz, Bolek; Kim, Daniel

    2017-04-01

    Developing technologies that would enable future NASA exploration missions to penetrate deeper into the subsurface of planetary bodies for sample collection is of great importance. Performing these tasks while using minimal mass/volume systems and with low energy consumption is another set of requirements imposed on such technologies. A deep drill, called Auto-Gopher II, is currently being developed as a joint effort between JPL's NDEAA laboratory and Honeybee Robotics Corp. The Auto-Gopher II is a wireline rotary-hammer drill that combines formation breaking by hammering using an ultrasonic actuator and cuttings removal by rotating a fluted auger bit. The hammering mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) mechanism that has been developed as an adaptable tool for many drilling and coring applications. The USDC uses an intermediate free-flying mass to transform high frequency vibrations of a piezoelectric transducer horn tip into sonic hammering of the drill bit. The USDC concept was used in a previous task to develop an Ultrasonic/Sonic Ice Gopher and then integrated into a rotary hammer device to develop the Auto-Gopher-I. The lessons learned from these developments are being integrated into the development of the Auto- Gopher-II, an autonomous deep wireline drill with integrated cuttings and sample management and drive electronics. Subsystems of the wireline drill are being developed in parallel at JPL and Honeybee Robotics Ltd. This paper presents the development efforts of the piezoelectric actuator, cuttings removal and retention flutes and drive electronics.

  2. Prediction of diagenesis and reservoir quality using wireline logs ...

    African Journals Online (AJOL)

    Reservoir quality is mainly controlled by environment deposit type and diagenesis processes. To investigate such subject we usually proceed to microscopic techniques. Absence of outcrops and missing of core samples let us use conventional wireline logs and core lab measurements as primary data. Direct lecture of well ...

  3. Downhole water management and robotic valve manipulation on electric wireline

    Energy Technology Data Exchange (ETDEWEB)

    Schwanitz, Brian [Welltec, Alleroed (Denmark); Petersen, Erik; Farias, Eduardo [Welltec do Brasil Ltda., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Due to high operating cost and challenging environments, the oil and gas industry is facing an increasing demand to identify areas where new intervention solutions can be applied. Down hole water management and robotic valve manipulation are some of the areas where new approaches are finding critical success. A new technology has enabled increased recovery rates by managing produced water and allowing remote mechanical manipulation of down hole valves on wireline. These services are possible when applying a robotic stroking device and a wireline key tool.This paper will examine the challenges and present case histories illustrating how advanced technological solutions were applied to overcome operational problem in order to enhance reservoir performance and well productivity. Specifically the paper will illustrate both how isolating sliding side door and setting bridge plug in high x-flow using wireline stroker and tractor technologies water cut were reduced from 85% to 5% and from 90% to 45% respectively and shifting isolation sleeve and open and close sliding sleeve replacing conventional methods with a solution that runs on electrical wireline meant a revolution within the oil and gas industry. (author)

  4. DEVELOPMENT OF A WIRELINE CPT SYSTEM FOR MULTIPLE TOOL USAGE

    Energy Technology Data Exchange (ETDEWEB)

    Stephen P. Farrington; Martin L. Gildea; J. Christopher Bianchi

    1999-08-01

    The first phase of development of a wireline cone penetrometer system for multiple tool usage was completed under DOE award number DE-AR26-98FT40366. Cone penetrometer technology (CPT) has received widespread interest and is becoming more commonplace as a tool for environmental site characterization activities at several Department of Energy (DOE) facilities. Although CPT already offers many benefits for site characterization, the wireline system can improve CPT technology by offering greater utility and increased cost savings. Currently the use of multiple CPT tools during a site characterization (i.e. piezometric cone, chemical sensors, core sampler, grouting tool) must be accomplished by withdrawing the entire penetrometer rod string to change tools. This results in multiple penetrations being required to collect the data and samples that may be required during characterization of a site, and to subsequently seal the resulting holes with grout. The wireline CPT system allows multiple CPT tools to be interchanged during a single penetration, without withdrawing the CPT rod string from the ground. The goal of the project is to develop and demonstrate a system by which various tools can be placed at the tip of the rod string depending on the type of information or sample desired. Under the base contract, an interchangeable piezocone and grouting tool was designed, fabricated, and evaluated. The results of the evaluation indicate that success criteria for the base contract were achieved. In addition, the wireline piezocone tool was validated against ASTM standard cones, the depth capability of the system was found to compare favorably with that of conventional CPT, and the reliability and survivability of the system were demonstrated.

  5. 47 CFR 68.106 - Notification to provider of wireline telecommunications.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Notification to provider of wireline telecommunications. 68.106 Section 68.106 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON... of Terminal Equipment § 68.106 Notification to provider of wireline telecommunications. (a) General...

  6. Auto-Gopher: A Wire-Line Rotary-Hammer Ultrasonic Drill

    Science.gov (United States)

    Badescu, Mircea; Sherrit, Stewart; Bao, Xiaogi; Bar-Cohen, Yoseph; Chen, Beck

    2011-01-01

    Developing technologies that would enable NASA to sample rock, soil, and ice by coring, drilling or abrading at a significant depth is of great importance for a large number of in-situ exploration missions as well as for earth applications. Proven techniques to sample Mars subsurface will be critical for future NASA astrobiology missions that will search for records of past and present life on the planet, as well as, the search for water and other resources. A deep corer, called Auto-Gopher, is currently being developed as a joint effort of the JPL's NDEAA laboratory and Honeybee Robotics Corp. The Auto-Gopher is a wire-line rotary-hammer drill that combines rock breaking by hammering using an ultrasonic actuator and cuttings removal by rotating a fluted bit. The hammering mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) that has been developed as an adaptable tool for many of drilling and coring applications. The USDC uses an intermediate free-flying mass to transform the high frequency vibrations of the horn tip into a sonic hammering of a drill bit. The USDC concept was used in a previous task to develop an Ultrasonic/Sonic Ice Gopher. The lessons learned from testing the ice gopher were implemented into the design of the Auto-Gopher by inducing a rotary motion onto the fluted coring bit. A wire-line version of such a system would allow penetration of significant depth without a large increase in mass. A laboratory version of the corer was developed in the NDEAA lab to determine the design and drive parameters of the integrated system. The design configuration lab version of the design and fabrication and preliminary testing results are presented in this paper

  7. Field project to obtain pressure core, wireline log, and production test data for evaluation of CO/sub 2/ flooding potential, Conoco MCA unit well No. 358, Maljamar Field, Lea County, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Swift, T.E.; Marlow, R.E.; Wilhelm, M.H.; Goodrich, J.H.; Kumar, R.M.

    1981-11-01

    This report describes part of the work done to fulfill a contract awarded to Gruy Federal, Inc., by the Department of Energy (DOE) on Feburary 12, 1979. The work includes pressure-coring and associated logging and testing programs to provide data on in-situ oil saturation, porosity and permeability distribution, and other data needed for resource characterization of fields and reservoirs in which CO/sub 2/ injection might have a high probability of success. This report details the second such project. Core porosities agreed well with computed log porosities. Core water saturation and computed log porosities agree fairly well from 3692 to 3712 feet, poorly from 3712 to 3820 feet and in a general way from 4035 to 4107 feet. Computer log analysis techniques incorporating the a, m, and n values obtained from Core Laboratories analysis did not improve the agreement of log versus core derived water saturations. However, both core and log analysis indicated the ninth zone had the highest residual hydrocarbon saturations and production data confirmed the validity of oil saturation determinations. Residual oil saturation, for the perforated and tested intervals were 259 STB/acre-ft for the interval from 4035 to 4055 feet, and 150 STB/acre-ft for the interval from 3692 to 3718 feet. Nine BOPD was produced from the interval 4035 to 4055 feet and no oil was produced from interval 3692 to 3718 feet, qualitatively confirming the relative oil saturations as calculated. The low oil production in the zone from 4022 to 4055 and the lack of production from 3692 to 3718 feet indicated the zone to be at or near residual waterflood conditions as determined by log analysis. This project demonstrates the usefulness of integrating pressure core, log, and production data to realistically evaluate a reservoir for carbon dioxide flood.

  8. Influence of borehole-eccentred tools on wireline and logging-while-drilling sonic logging measurements

    KAUST Repository

    Pardo, David

    2013-02-13

    We describe a numerical study to quantify the influence of tool-eccentricity on wireline (WL) and logging-while-drilling (LWD) sonic logging measurements. Simulations are performed with a height-polynomial-adaptive (hp) Fourier finite-element method that delivers highly accurate solutions of linear visco-elasto-acoustic problems in the frequency domain. The analysis focuses on WL instruments equipped with monopole or dipole sources and LWD instruments with monopole excitation. Analysis of the main propagation modes obtained from frequency dispersion curves indicates that the additional high-order modes arising as a result of borehole-eccentricity interfere with the main modes (i.e., Stoneley, pseudo-Rayleigh and flexural). This often modifies (decreases) the estimation of shear and compressional formation velocities, which should be corrected (increased) to account for borehole-eccentricity effects. Undesired interferences between different modes can occur at different frequencies depending upon the properties of the formation and fluid annulus size, which may difficult the estimation of the formation velocities. © 2013 European Association of Geoscientists & Engineers.

  9. Wireline Deep Drill for the Exploration of Icy Bodies

    Science.gov (United States)

    Paulsen, G.; Zacny, K.; Mellerowicz, B.; Craft, J.; Bar-Cohen, Y.; Beegle, L.; Sherrit, S.; Badescu, M.; Corsetti, F.; Ibarra, Y.

    2013-01-01

    One of the most pressing current questions in space science is whether life has ever arisen anywhere else in the universe. Water is a critical prerequisite for all life-as-we-know-it, thus the possible exploration targets for extraterrestrial life are bodies that have or had copious liquid: Mars, Europa, and Enceladus. Due to the oxidizing nature of Mars' surface, as well as subsurface liquid water reservoirs present on Europa and Enceladus, the search for evidence of existing life must likely focus on subsurface locations, at depths sufficient to support liquid water or retain biologic signatures. To address these questions, an Auto-Gopher sampler has been developed that is a wireline type drill. This drill is suspended on a tether and its motors and mechanisms are built into a tube that ends with a coring bit. The tether provides the mechanical connection to a rover/lander on a surface as well as power and data communication. Upon penetrating to a target depth, the drill is retracted from the borehole, the core is deposited into a sample transfer system, and the drill is lowered back into the hole. Wireline operation sidesteps one of the major drawbacks of traditional continuous drill string systems by obviating the need for multiple drill sections, which add significantly to the mass and the complexity of the system (i.e. penetration rate was 40 cm per hour). Drilling to 2 meter depth and recovering of cores every 10 cm took a total time of 15 hours (a single step of drilling 10 cm and retrieving the core was 45 minutes). Total energy to reach the 2 m depth was 500 Whr. The Weight on Bit was limited to less than 70 Newton. The core recovery was 100%.

  10. Fundamental tests of galaxy formation theory

    Science.gov (United States)

    Silk, J.

    1982-01-01

    The structure of the universe as an environment where traces exist of the seed fluctuations from which galaxies formed is studied. The evolution of the density fluctuation modes that led to the eventual formation of matter inhomogeneities is reviewed, How the resulting clumps developed into galaxies and galaxy clusters acquiring characteristic masses, velocity dispersions, and metallicities, is discussed. Tests are described that utilize the large scale structure of the universe, including the dynamics of the local supercluster, the large scale matter distribution, and the anisotropy of the cosmic background radiation, to probe the earliest accessible stages of evolution. Finally, the role of particle physics is described with regard to its observable implications for galaxy formation.

  11. Reservoir Characterisation Using Wireline Evaluation And Poststack Seismic Inversion: A Lancelot Field, Southern North Sea, U.K. case study

    International Nuclear Information System (INIS)

    Mojisola, A.

    2002-01-01

    Improved reservoir characterization has been a major factor in the worldwide gain in oil recovery efficiencies over the last decades. This is because inadequate reservoir characterization, usually due to lack of appropriate tools can cause significant errors in petroleum reservoir performance prediction thereby preventing the full potential of a reservoir from being achieved. This work employs the use of wireline logs and the seismic inversion process to characterize the reservoirs in the Lancelot field. An initial reservoir analysis was carried out using the wireline evaluation. Five potential reservoirs were delineated. Thereafter reservoir parameters such as porosity, water saturation, water saturation, net-to-gross ratio of the delineated reservoirs were estimated. The seismic inversion process depends on four factors; the wavelet, the tie between the well logs and the seismic, the inversion algorithm employed and the initial model. Therefore before the main inversion, parameter tests were carried out to determine the best wavelet extraction algorithm and best inversion algorithm suited for he available data. A wavelet with a length of 70ms and a taper length of 20ms gave a close approximation of a zero phase wavelet with a stable spectrum and high dominant frequency. Based on quantitative assessment of the available inversion algorithms, the constrained blocky inversion produced the best result. Acoustic impedance, velocity and porosity sections were produced from the inverted input seismic. By incorporating geological and wireline evaluation results as constraints, the output from the inversion process were analysed. The result shows lateral variation in the reservoirs qualities of the delineated reservoirs. The seismic inversion process confirmed the Rotliegend sandstone as a prospect with a range of porosity predicted from the inversion

  12. Broadband Wireline Provider Service: Symmetric xDSL; BBRI_DSLsym12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via Symmetric xDSL technology. Broadband availability is summarized at...

  13. Broadband Wireline Provider Service: Cable Modem - Other; BBRI_cableOther12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via "Cable Modem - Other" technology. Broadband availability is...

  14. Broadband Wireline Provider Service: Asymmetric xDSL; BBRI_DSLasym12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via Asymmetric xDSL technology. Broadband availability is summarized...

  15. Broadband Wireline Provider Service: Cable Modem - DOCSIS 3.0; BBRI_cableDOCSIS12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via "Cable Modem - DOCSIS 3.0" technology. Broadband availability is...

  16. Broadband Wireline Provider Service: Optical Carrier - Fiber to the End User; BBRI_fiber12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via "Optical Carrier - Fiber to the End User" technology. Broadband...

  17. Converged wireline and wireless signal transport over optical fibre access links

    DEFF Research Database (Denmark)

    Tafur Monroy, Idelfonso; Prince, Kamau; Osadchiy, Alexey Vladimirovich

    2009-01-01

    This article reviews emerging trends in converged optical-wireless communication systems and outline the role that photonic technologies are playing in making the vision of a wireline-wireless converged signal transport network a reality.......This article reviews emerging trends in converged optical-wireless communication systems and outline the role that photonic technologies are playing in making the vision of a wireline-wireless converged signal transport network a reality....

  18. 15 CFR 995.27 - Format validation software testing.

    Science.gov (United States)

    2010-01-01

    ... of NOAA ENC Products § 995.27 Format validation software testing. Tests shall be performed verifying... specification. These tests may be combined with testing of the conversion software. ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Format validation software testing...

  19. The Effects of Test Format and Locus of Control on Test Anxiety.

    Science.gov (United States)

    Choi, Namok

    1998-01-01

    Investigates the joint effects of locus of control and test format on test anxiety with college students (N=86). Examines the relationship between students' attitudes toward test format and test anxiety. Results show no differential effect of locus of control on test anxiety across test format; students were more anxious about essay tests than…

  20. REAL-TIME TRACER MONITORING OF RESERVOIR STIMULATION PROCEDURES VIA ELECTRONIC WIRELINE AND TELEMETRY DATA TRANSMISSION

    Energy Technology Data Exchange (ETDEWEB)

    George L. Scott III

    2005-01-01

    Finalized Phase 2-3 project work has field-proven two separate real-time reservoir processes that were co-developed via funding by the National Energy Technology Laboratory (NETL). Both technologies are presently patented in the United States and select foreign markets; a downhole-commingled reservoir stimulation procedure and a real-time tracer-logged fracturing diagnostic system. Phase 2 and early Phase 3 project work included the research, development and well testing of a U.S. patented gamma tracer fracturing diagnostic system. This stimulation logging process was successfully field-demonstrated; real-time tracer measurement of fracture height while fracturing was accomplished and proven technically possible. However, after the initial well tests, there were several licensing issues that developed between service providers that restricted and minimized Realtimezone's (RTZ) ability to field-test the real-time gamma diagnostic system as was originally outlined for this project. Said restrictions were encountered after when one major provider agreed to license their gamma logging tools to another. Both of these companies previously promised contributory support toward Realtimezone's DE-FC26-99FT40129 project work, however, actual support was less than desired when newly-licensed wireline gamma logging tools from one company were converted by the other from electric wireline into slickline, batter-powered ''memory'' tools for post-stimulation logging purposes. Unfortunately, the converted post-fracture measurement memory tools have no applications in experimentally monitoring real-time movement of tracers in the reservoir concurrent with the fracturing treatment. RTZ subsequently worked with other tracer gamma-logging tool companies for basic gamma logging services, but with lessened results due to lack of multiple-isotope detection capability. In addition to real-time logging system development and well testing, final Phase 2 and

  1. 76 FR 11407 - Review of Wireline Competition Bureau Data Practices, Computer III Further Remand Proceedings...

    Science.gov (United States)

    2011-03-02

    ... Docket No. 10-132; FCC 11-15] Review of Wireline Competition Bureau Data Practices, Computer III Further... removal of the narrowband comparably efficient interconnection (CEI) and open network architecture (ONA... track the organization set forth in the NPRM in order to facilitate our internal review process. Initial...

  2. 76 FR 20976 - Wireline Competition Bureau Releases 2011 Annual Telecommunications Reporting Worksheet (FCC Form...

    Science.gov (United States)

    2011-04-14

    ... FURTHER INFORMATION CONTACT: Nicholas Degani, Wireline Competition Bureau, Competition Policy Division, at... revised the Form and instructions to make the process of preparing Form 499-A more user-friendly for... sections. (3) Moving the table used to determine whether a filer is de minimis for universal service...

  3. 47 CFR 1.20007 - Additional assistance capability requirements for wireline, cellular, and PCS telecommunications...

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Additional assistance capability requirements for wireline, cellular, and PCS telecommunications carriers. 1.20007 Section 1.20007 Telecommunication... telecommunications carriers. (a) Definition—(1) Call-identifying information. Call identifying information means...

  4. Simulation of wireline sonic logging measurements acquired with Borehole-Eccentered tools using a high-order adaptive finite-element method

    KAUST Repository

    Pardo, David

    2011-07-01

    The paper introduces a high-order, adaptive finite-element method for simulation of sonic measurements acquired with borehole-eccentered logging instruments. The resulting frequency-domain based algorithm combines a Fourier series expansion in one spatial dimension with a two-dimensional high-order adaptive finite-element method (FEM), and incorporates a perfectly matched layer (PML) for truncation of the computational domain. The simulation method was verified for various model problems, including a comparison to a semi-analytical solution developed specifically for this purpose. Numerical results indicate that for a wireline sonic tool operating in a fast formation, the main propagation modes are insensitive to the distance from the center of the tool to the center of the borehole (eccentricity distance). However, new flexural modes arise with an increase in eccentricity distance. In soft formations, we identify a new dipole tool mode which arises as a result of tool eccentricity. © 2011 Elsevier Inc.

  5. Online formative tests linked to microlectures improving academic achievement.

    Science.gov (United States)

    Bouwmeester, Rianne A M; de Kleijn, Renske A M; Freriksen, Astrid W M; van Emst, Maarten G; Veeneklaas, Rob J; van Hoeij, Maggy J W; Spinder, Matty; Ritzen, Magda J; Ten Cate, Olle Th J; van Rijen, Harold V M

    2013-12-01

    Online formative tests (OFTs) are powerful tools to direct student learning behavior, especially when enriched with specific feedback. In the present study, we have investigated the effect of OFTs enriched with hyperlinks to microlectures on examination scores. OFTs, available one week preceding each midterm and the final exams, could be used voluntarily. The use of OFTs was related to scores on midterm and final exams using ANOVA, with prior academic achievement as a covariate. On average, 74% of all students used the online formative tests (OFT+) while preparing for the summative midterm exam. OFT+ students obtained significantly higher grades compared to OFT-students, both without and with correction for previous academic achievement. Two out of three final exam scores did not significantly improve. Students using online formative tests linked to microlectures receive higher grades especially in highly aligned summative tests.

  6. Comparison of assay formats for drug-tolerant immunogenicity testing.

    Science.gov (United States)

    Butterfield, Anthony M; Chain, Jana S; Ackermann, Bradley L; Konrad, Robert J

    2010-12-01

    Immunogenicity testing is required for safety assessment of biotherapeutic drugs. Because levels observed during biotherapeutic administration can approach the mg/ml range, establishing drug tolerance is significantly important for assay development. Three assay formats for immunogenicity assessment were tested with respect to drug tolerance: Meso Scale Discovery(®) bridging (MSDB), solid-phase extraction with acid dissociation (SPEAD) and affinity capture elution (ACE). Six biotherapeutic drugs were analyzed by the three methods; four monoclonal antibodies, one Fc fusion protein and one Pegylated protein. Overall, ACE performed best for assays involving therapeutic monoclonal antibodies and also functioned well for therapeutic proteins. Despite several advantages, the MSDB assays displayed a potentially significant hook effect. SPEAD was comparable in performance to ACE for the biotherapeutic drugs tested, but suffers the disadvantage of being reagent-intensive. Novel assay formats offer significant advantages for immunogenicity testing, particularly in the design of assays that are tolerant to circulating levels of the biotherapeutic drug.

  7. Experimental Test of Piagetian Concrete Operations in a Reading Format.

    Science.gov (United States)

    Kretschmer, Joseph C.

    Designed to assess the ability of subjects to apply concrete operations to data in a reading format, and to determine if there is any difference with regard to type of paragraph or type of question, this test consists of four short paragraphs, each of which established one of the following operations: an additive classification, a multiplicative…

  8. Vocabulary test format and differential relations to age.

    Science.gov (United States)

    Bowles, Ryan P; Salthouse, Timothy A

    2008-06-01

    Although vocabulary tests are generally considered interchangeable, regardless of format, different tests can have different relations to age and to other cognitive abilities. In this study, 4 vocabulary test formats were examined: multiple-choice synonyms, multiple-choice antonyms, produce the definition, and picture identification. Results indicated that, although they form a single coherent vocabulary knowledge factor, the formats have different relations to age. In earlier adulthood, picture identification had the strongest growth, and produce the definition had the weakest. In later adulthood, picture identification had the strongest decline, and multiple-choice synonyms had the least. The formats differed in their relation to other cognitive variables, including reasoning, spatial visualization, memory, and speed. After accounting for the differential relations to other cognitive variables, differences in relation to age were eliminated with the exception of differences for the picture identification test. No theory of the aging of vocabulary knowledge fully explains these findings. These results suggest that using a single indicator of vocabulary may yield incomplete and somewhat misleading results about the aging of vocabulary knowledge.

  9. Numerical simulation supports formation testing planning; Simulacao numerica auxilia planejamento de teste de formacao

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Rogerio Marques; Fonseca, Carlos Eduardo da [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    A well test is an operation that allows the engineer assessing reservoir performance and fluids properties by measuring flow rates and pressures under a range of flowing conditions. In most well tests, a limited amount of fluid is allowed to flow from the formation being tested. The formation is isolated behind cemented casing and perforated at the formation depth or, in open hole, the formation is straddled by a pair of packers that isolate the formation. During the flow period, the pressure at the formation is monitored over time. Then, the formation is closed (or shut in) and the pressure monitored at the formation while the fluid within the formation equilibrates. The analysis of these pressure changes can provide information on the size and shape of the formation as well as its ability to produce fluids. . The flow of fluid through the column test causes your heating and hence its elongation. Several factors affect the rate of exchange of heat as well and the characteristics of the fluid, the flow of time and the flow and the existence of deep water. The prediction of temperature over well, in its various components, and the effect caused in the column test is not a trivial task. Some authors, for example, describe a method of calculating the behaviour of columns of production, making it simpler variation of constant temperature throughout the entire column, a fact that this does not occur in practice. The work aims at presenting the advantages of using the numerical simulation in determining the efforts and corresponding movements of the column of test of formation. (author)

  10. Towards convergence of wireless and wireline signal transport in broadband access networks

    DEFF Research Database (Denmark)

    Yu, Xianbin; Prince, Kamau; Tafur Monroy, Idelfonso

    2010-01-01

    Hybrid optical wireless access networks are to play an important role in the realization of the vision of delivery of broadband services to the end-user any time, anywhere and at affordable costs. We present results of experiments conducted over a field deployed optical fibre links we successfull...... demonstrated converged wireless and wireline signal transport over a common fibre infrastructure. The type of signal used in this field deployed experiments cover WiMax, Impulse-radio ultra-wideband (UWB) and coherent transmission of baseband QPSK and radio-over-fibre signals....

  11. Analysis of Adaptive Interference Cancellation Using Common-Mode Information in Wireline Communications

    Directory of Open Access Journals (Sweden)

    Per Ola Börjesson

    2007-01-01

    Full Text Available Joint processing of common-mode (CM and differential-mode (DM signals in wireline transmission can yield significant improvements in terms of throughput compared to using only the DM signal. Recent work proposed the employment of an adaptive CM-reference-based interference canceller and reported performance improvements based on simulation results. This paper presents a thorough investigation of the cancellation approach. A subchannel model of the CM-aided wireline channel is presented and the Wiener solutions for different adaptation strategies are derived. It is shown that a canceller, whose coefficients are adapted while the far-end transmitter is silent, yields a signal-to-noise power ratio (SNR that is higher than the SNR at the DM channel output for a large class of practically relevant cases. Adaptation while the useful far-end signal is present yields a front-end whose output SNR is considerably lower compared to the SNR of the DM channel output. The results are illustrated by simulations based on channel measurement data.

  12. Test plan: Gas-threshold-pressure testing of the Salado Formation in the WIPP underground facility

    International Nuclear Information System (INIS)

    Saulnier, G.J. Jr.

    1992-03-01

    Performance assessment for the disposal of radioactive waste from the United States defense program in the WIPP underground facility must assess the role of post-closure was generation by waste degradation and the subsequent pressurization of the facility. be assimilated by the host formation will Whether or not the generated gas can be assimilated by the host formation will determine the ability of the gas to reach or exceed lithostatic pressure within the repository. The purpose of this test plan is (1) to present a test design to obtain realistic estimates of gas-threshold pressure for the Salado Formation WIPP underground facility including parts of the formation disturbed by the underground of the Salado, and (2) to provide a excavations and in the far-field or undisturbed part framework for changes and amendments to test objectives, practices, and procedures. Because in situ determinations of gas-threshold pressure in low-permeability media are not standard practice, the methods recommended in this testplan are adapted from permeability-testing and hydrofracture procedures. Therefore, as the gas-threshold-pressure testing program progresses, personnel assigned to the program and outside observers and reviewers will be asked for comments regarding the testing procedures. New and/or improved test procedures will be documented as amendments to this test plan, and subject to similar review procedures

  13. 78 FR 42699 - Application for Review of a Decision of the Wireline Competition Bureau by Dooly County School...

    Science.gov (United States)

    2013-07-17

    ..., in April 2003, the Commission released the Schools and Libraries Second Report and Order, 68 FR 36931... Commission to 60 days. The Schools and Libraries Second Report and Order did not, however, address the...] Application for Review of a Decision of the Wireline Competition Bureau by Dooly County School System; Schools...

  14. An electrical test system for conductor formation process analysis

    Energy Technology Data Exchange (ETDEWEB)

    Estes, T.A. [Sandia National Labs., Albuquerque, NM (United States); Rhodes, R.J. [AT and T Bell Labs., Whippany, NJ (United States)

    1994-03-01

    Sandia National Laboratories has designed and built an electrical test system which fulfills a requirement to quickly, accurately and precisely measure the resistance of conductors formed on Printed Wiring Board (PWB) substrates. This requirement stems from the need to measure small variations in conductors and thus to determine the source of the variations. With this test technology, experiments can be conducted with new materials, equipment, and processes in a timely and scientific manner. Conductor formation processes can be optimized for both conductor yield and uniformity, and process equipment can be fine-tuned prior to processing product to ensure that conductor attributes fulfill requirements. Significant resources have been spent by Sandia National Laboratories and Texas Instruments modifying commercially available two-probe testers. AT&T has built a two-probe tester and obtained a commercially available ``bed-of-nails`` test system. The two-probe systems have limitations in speed and precision; the ``bed-of-nails`` system has proved to be superior to the two-probe designs but is expensive, and lacks test pattern flexibility and ease of use. Due to the need to establish a testing technology which meets the requirements of Sandia National Laboratories and the National Center for Manufacturing Sciences PWB Consortium Imaging Team (current Imaging Team members; AT&T, Texas Instruments, AlliedSignal, IBM, and Sandia National Laboratories), a prototype test system was designed and built by Sandia. This paper will discuss the design and performance of the test system and the results of a comparison to other test systems.

  15. A wireline piston core barrel for sampling cohesionless sand and gravel below the water table

    Science.gov (United States)

    Zapico, Michael M.; Vales, Samuel; Cherry, John A.

    1987-01-01

    A coring device has been developed to obtain long and minimally disturbed samples of saturated cohesionless sand and gravel. The coring device, which includes a wireline and piston, was developed specifically for use during hollow-stem auger drilling but it also offers possibilities for cable tool and rotary drilling. The core barrel consists of an inner liner made of inexpensive aluminum or plastic tubing, a piston for core recovery, and an exterior steel housing that protects the liner when the core barrel is driven into the aquifer. The core barrel, which is approximately 1.6m (5.6 feet) long, is advanced ahead of the lead auger by hammering at the surface on drill rods that are attached to the core barrel. After the sampler has been driven 1.5m (5 feet), the drill rods are detached and a wireline is used to hoist the core barrel, with the sample contained in the aluminum or plastic liner, to the surface. A vacuum developed by the piston during the coring operation provides good recovery of both the sediment and aquifer fluids contained in the sediment. In the field the sample tubes can be easily split along their length for on-site inspection or they can be capped with the pore water fluids inside and transported to the laboratory. The cores are 5cm (2 inches) in diameter by 1.5m (5 feet) long. Core acquisition to depths of 35m (115 feet), with a recovery greater than 90 percent, has become routine in University of Waterloo aquifer studies. A large diameter (12.7cm [5 inch]) version has also been used successfully. Nearly continuous sample sequences from sand and gravel aquifers have been obtained for studies of sedimentology, hydraulic conductivity, hydrogeochemistry and microbiology.

  16. The Auto-Gopher: A Wireline Rotary-Percussive Deep Sampler

    Science.gov (United States)

    Bar-Cohen, Yoseph; Zacny, Kris; Badescu, Mircea; Lee, Hyeong Jae; Sherrit, Stewart; Bao, Xiaoqi; Paulsen, Gale L.; Beegle, Luther

    2016-01-01

    Accessing regions on planetary bodies that potentially preserved biosignatures or are presently habitable is vital to meeting NASA solar system "Search for Life" exploration objectives. To address these objectives, a wireline deep rotary-percussive corer called Auto-Gopher was developed. The percussive action provides effective material fracturing and the rotation provides effective cuttings removal. To increase the drill's penetration rate, the percussive and rotary motions are operated simultaneously. Initially, the corer was designed as a percussive mechanism for sampling ice and was demonstrated in 2005 in Antarctica reaching about 2 m deep. The lessons learned suggested the need to use a combination of rotation and hammering to maximize the penetration rate. This lesson was implemented into the Auto-Gopher-I deep drill which was demonstrated to reach 3-meter deep in gypsum. The average drilling power that was used has been in the range of 100-150 Watt, while the penetration rate was approximately 2.4 m/hr. Recently, a task has started with the goal to develop Auto-Gopher-II that is equipped to execute all the necessary functions in a single drilling unit. These functions also include core breaking, retention and ejection in addition drilling. In this manuscript, the Auto-Gopher-II, its predecessors and their capability are described and discussed.

  17. Testing Structure Formation in the Universe via Coupled Matter Fluids

    African Journals Online (AJOL)

    kagoyire

    the universe is dominated by two “dark” components- dark matter. (DM) and dark energy (DE)- that contribute about 26% and 69% respectively to the total cosmic energy budget, raises key questions about the nature of the “dark-sector” and large-scale structure formation (Planck Collaboration XVI, 2014). Motivated by a ...

  18. Europan double ridge morphometry as a test of formation models

    Science.gov (United States)

    Dameron, Ashley C.; Burr, Devon M.

    2018-05-01

    Double ridges on the Jovian satellite Europa consist of two parallel ridges with a central trough. Although these features are nearly ubiquitous on Europa, their formation mechanism(s) is (are) not yet well-understood. Previous hypotheses for their formation can be divided into two groups based on 1) the expected interior slope angles and 2) the magnitude of interior/exterior slope symmetry. The published hypotheses in the first ("fracture") group entail brittle deformation of the crust, either by diapirism, shear heating, or buckling due to compression. Because these mechanisms imply uplift of near-vertical fractures, their predicted interior slopes are steeper than the angle of repose (AOR) with shallower exterior slopes. The second ("flow") group includes cryosedimentary and cryovolcanic processes - explosive or effusive cryovolcanism and tidal squeezing -, which are predicted to form ridge slopes at or below the AOR. Explosive cryovolcanism would form self-symmetric ridges, whereas effusive cryolavas and cryo-sediments deposited during tidal squeezing would likely not exhibit slope symmetry. To distinguish between these two groups of hypothesized formation mechanisms, we derived measurements of interior slope angle and interior/exterior slope symmetry at multiple locations on Europa through analysis of data from the Galileo Solid State Imaging (SSI) camera. Two types of data were used: i) elevation data from five stereo-pair digital elevation models (DEMs) covering four ridges (580 individual measurements), and ii) ridge shadow length measurements taken on individual images over 40 ridges (200 individual measurements). Our results shows that slopes measured on our DEMs, located in the Cilix and Banded Plains regions, typically fall below the AOR, and slope symmetry is dominant. Two different shadow measurement techniques implemented to calculate interior slopes yielded slope angles that also fall below the AOR. The shallow interior slopes derived from both

  19. Cryogenic Semiconductor Detectors: Simulation of Signal Formation & Irradiation Beam Test

    CERN Document Server

    AUTHOR|(CDS)2091318; Stamoulis, G; Vavougios, D

    The Beam Loss Monitoring system of the Large Hadron Collider is responsible for the pro- tection of the machine from damage and for the prevention of a magnet quench. Near the interaction points of the LHC, in the triplet magnets area, the BLMs are sensitive to the collision debris, limiting their ability to distinguish beam loss signal from signal caused due to the collision products. Placing silicon & diamond detectors inside the cold mass of the mag- nets, in liquid helium temperatures, would provide significant improvement to the precision of the measurement of the energy deposition in the superconducting coil of the magnet. To further study the signal formation and the shape of the transient current pulses of the aforementioned detectors in cryogenic temperatures, a simulation application has been developed. The application provides a fast way of determining the electric field components inside the detectors bulk and then introduces an initial charge distribution based on the properties of the radiat...

  20. Tests of in situ formation scenarios for compact multiplanet systems

    Energy Technology Data Exchange (ETDEWEB)

    Schlaufman, Kevin C., E-mail: kschlauf@mit.edu [Kavli Institute for Astrophysics and Space Research, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States)

    2014-08-01

    Kepler has identified over 600 multiplanet systems, many of which have several planets with orbital distances smaller than that of Mercury. Because these systems may be difficult to explain in the paradigm of core accretion and disk migration, it has been suggested that they formed in situ within protoplanetary disks with high solid surface densities. The strong connection between giant planet occurrence and stellar metallicity is thought to be linked to enhanced solid surface densities in disks around metal-rich stars, so the presence of a giant planet can be a sign of planet formation in a high solid surface density disk. I formulate quantitative predictions for the frequency of long-period giant planets in these in situ models by translating the proposed increase in disk mass into an equivalent metallicity enhancement. I rederive the scaling of giant planet occurrence with metallicity as P{sub gp}=0.05{sub −0.02}{sup +0.02}×10{sup (2.1±0.4)[M/H]}=0.08{sub −0.03}{sup +0.02}×10{sup (2.3±0.4)[Fe/H]} and show that there is significant tension between the frequency of giant planets suggested by the minimum mass extrasolar nebula scenario and the observational upper limits. Consequently, high-mass disks alone cannot explain the observed properties of the close-in Kepler multiplanet systems and therefore migration is still important. More speculatively, I combine the metallicity scaling of giant planet occurrence with small planet occurrence rates to estimate the number of solar system analogs in the Galaxy. I find that in the Milky Way there are perhaps 4 × 10{sup 6} true solar system analogs with an FGK star hosting both a terrestrial planet in the habitable zone and a long-period giant planet companion.

  1. Testing command and control of the satellites in formation flight

    Science.gov (United States)

    Gheorghe, Popan; Gheorghe, Gh. Ion; Gabriel, Todoran

    2013-10-01

    The topics covered in the paper are mechatronic systems for determining the distance between the satellites and the design of the displacement system on air cushion table for satellites testing. INCDMTM has the capability to approach the collaboration within European Programms (ESA) of human exploration of outer space through mechatronic systems and accessories for telescopes, mechatronics systems used by the launchers, sensors and mechatronic systems for the robotic exploration programs of atmosphere and Mars. This research has a strong development component of industrial competitiveness many of the results of space research have direct applicability in industrial fabrication.

  2. The Relation between Test Formats and Kindergarteners' Expressions of Vocabulary Knowledge

    Science.gov (United States)

    Christ, Tanya; Chiu, Ming Ming; Currie, Ashelin; Cipielewski, James

    2014-01-01

    This study tested how 53 kindergarteners' expressions of depth of vocabulary knowledge and use in novel contexts were related to in-context and out-of-context test formats for 16 target words. Applying multilevel, multi-categorical Logit to all 1,696 test item responses, the authors found that kindergarteners were more likely to express deep…

  3. What is more effective: a daily or a weekly formative test?

    NARCIS (Netherlands)

    Palmen, L.N.; Vorstenbosch, M.A.T.M.; Tanck, E.J.M.; Kooloos, J.G.M.

    2015-01-01

    BACKGROUND: Exams in anatomy courses are traditionally summative. Formative testing induces retrieval practice, provides feedback and enhances learning results. We investigated the optimal frequency for retrieval practice during an anatomy course. METHOD: During a first-year course, students were

  4. Converged Wireless and Wireline Access System Based on Optical Phase Modulation for Both Radio-Over-Fiber and Baseband Signals

    DEFF Research Database (Denmark)

    Yu, Xianbin; Jensen, Jesper Bevensee; Zibar, Darko

    2008-01-01

    -to-zero differential quaternary phase-shift keyed signal and a 5.25-GHz RoF carrying 1.25 Gb/s, enables the use of identical optical receiver structures. The experimental results show that both receivers achieve error-free operation after 80-km standard single-mode fiber transmission. The proposed scheme has potential......We propose and experimentally investigate a scheme for transmitting a phase-modulated radio-over-fiber (RoF) signal along an existing fiber infrastructure without degradation of the existing baseband signal. Optical phase encoding of both signals, namely a baseband 21.4-Gb/s nonreturn...... applications for converged wireless and wireline optical access networks....

  5. 16 CFR Figure 10 to Subpart A of... - Insulation Radiant Panel Test Data Log Format

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Insulation Radiant Panel Test Data Log Format 10 Figure 10 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1209, Subpt. A, Fig. 10 Figure 10 to Subpart A of Part 1209—Insulation Radiant Panel Test Data Log...

  6. Test Format and the Variation of Gender Achievement Gaps within the United States

    Science.gov (United States)

    Reardon, Sean; Fahle, Erin; Kalogrides, Demetra; Podolsky, Anne; Zarate, Rosalia

    2016-01-01

    Prior research demonstrates the existence of gender achievement gaps and the variation in the magnitude of these gaps across states. This paper characterizes the extent to which the variation of gender achievement gaps on standardized tests across the United States can be explained by differing state accountability test formats. A comprehensive…

  7. Hydraulic testing of Salado Formation evaporites at the Waste Isolation Pilot Plant site: Second interpretive report

    Energy Technology Data Exchange (ETDEWEB)

    Beauheim, R.L. [Sandia National Labs., Albuquerque, NM (United States); Roberts, R.M.; Dale, T.F.; Fort, M.D.; Stensrud, W.A. [INTERA, Inc., Austin, TX (United States)

    1993-12-01

    Pressure-pulse, constant-pressure flow, and pressure-buildup tests have been performed in bedded evaporites of the Salado Formation at the Waste Isolation Pilot Plant (WIPP) site to evaluate the hydraulic properties controlling brine flow through the Salado. Transmissivities have been interpreted from six sequences of tests conducted on five stratigraphic intervals within 15 m of the WIPP underground excavations.

  8. Hydraulic testing of Salado Formation evaporites at the Waste Isolation Pilot Plant site: Second interpretive report

    International Nuclear Information System (INIS)

    Beauheim, R.L.; Roberts, R.M.; Dale, T.F.; Fort, M.D.; Stensrud, W.A.

    1993-12-01

    Pressure-pulse, constant-pressure flow, and pressure-buildup tests have been performed in bedded evaporites of the Salado Formation at the Waste Isolation Pilot Plant (WIPP) site to evaluate the hydraulic properties controlling brine flow through the Salado. Transmissivities have been interpreted from six sequences of tests conducted on five stratigraphic intervals within 15 m of the WIPP underground excavations

  9. Effects of Repeated Testing on Short- and Long-Term Memory Performance across Different Test Formats

    Science.gov (United States)

    Stenlund, Tova; Sundström, Anna; Jonsson, Bert

    2016-01-01

    This study examined whether practice testing with short-answer (SA) items benefits learning over time compared to practice testing with multiple-choice (MC) items, and rereading the material. More specifically, the aim was to test the hypotheses of "retrieval effort" and "transfer appropriate processing" by comparing retention…

  10. Classification Accuracy of Mixed Format Tests: A Bi-Factor Item Response Theory Approach.

    Science.gov (United States)

    Wang, Wei; Drasgow, Fritz; Liu, Liwen

    2016-01-01

    Mixed format tests (e.g., a test consisting of multiple-choice [MC] items and constructed response [CR] items) have become increasingly popular. However, the latent structure of item pools consisting of the two formats is still equivocal. Moreover, the implications of this latent structure are unclear: For example, do constructed response items tap reasoning skills that cannot be assessed with multiple choice items? This study explored the dimensionality of mixed format tests by applying bi-factor models to 10 tests of various subjects from the College Board's Advanced Placement (AP) Program and compared the accuracy of scores based on the bi-factor analysis with scores derived from a unidimensional analysis. More importantly, this study focused on a practical and important question-classification accuracy of the overall grade on a mixed format test. Our findings revealed that the degree of multidimensionality resulting from the mixed item format varied from subject to subject, depending on the disattenuated correlation between scores from MC and CR subtests. Moreover, remarkably small decrements in classification accuracy were found for the unidimensional analysis when the disattenuated correlations exceeded 0.90.

  11. A high throughput passive dosing format for the Fish Embryo Acute Toxicity test

    DEFF Research Database (Denmark)

    Vergauwen, Lucia; Nørgaard Schmidt, Stine; Stinckens, Evelyn

    2015-01-01

    High throughput testing according to the Fish Embryo Acute Toxicity (FET) test (OECD Testing Guideline 236) is usually conducted in well plates. In the case of hydrophobic test substances, sorptive and evaporative losses often result in declining and poorly controlled exposure conditions. Therefore......, our objective was to improve exposure conditions in FET tests by evaluating a passive dosing format using silicone O-rings in standard 24-well polystyrene plates. We exposed zebrafish embryos to a series of phenanthrene concentrations until 120 h post fertilization (hpf), and obtained a linear...

  12. Barometric pressure transient testing applications at the Nevada Test Site: formation permeability analysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, J.M.

    1984-12-01

    The report evaluates previous investigations of the gas permeability of the rock surrounding emplacement holes at the Nevada Test Site. The discussion sets the framework from which the present uncertainty in gas permeability can be overcome. The usefulness of the barometric pressure testing method has been established. Flow models were used to evaluate barometric pressure transients taken at NTS holes U2fe, U19ac and U20ai. 31 refs., 103 figs., 18 tabs. (ACR)

  13. Barometric pressure transient testing applications at the Nevada Test Site: formation permeability analysis. Final report

    International Nuclear Information System (INIS)

    Hanson, J.M.

    1984-12-01

    The report evaluates previous investigations of the gas permeability of the rock surrounding emplacement holes at the Nevada Test Site. The discussion sets the framework from which the present uncertainty in gas permeability can be overcome. The usefulness of the barometric pressure testing method has been established. Flow models were used to evaluate barometric pressure transients taken at NTS holes U2fe, U19ac and U20ai. 31 refs., 103 figs., 18 tabs

  14. A novel bedside diagnostic test for methanol poisoning using dry chemistry for formate.

    Science.gov (United States)

    Hovda, Knut Erik; Gadeholt, Gaut; Evtodienko, Vladimir; Jacobsen, Dag

    2015-11-01

    The standard diagnostic approach to methanol poisoning is chromatographic measurement of methanol on centrally placed stationary equipment. Methanol poisoning in places where such equipment is unavailable is thus often not diagnosed. Methanol is metabolized to a toxic metabolite, formate; the presence of this compound indicates methanol poisoning. We have developed an enzymatic test for formate and modified it into a portable dry chemistry system that could be used anywhere. The method consists of two enzymatic steps: Formation of NADH from NAD by formate dehydrogenase, and subsequent use of NADH as a reductant of a tetrazolium into a formazan dye that can be quantified photometrically or visually. The photometer gave a good correlation of R(2) = 0.9893 in serum and R(2) = 0.9949 in whole blood, showing an instrumental detection limit of less than 1 mM (4.5 mg/dL). The visual readings showed a correlation of R(2) = 0.8966. Users experienced some difficulty in separating the negative control from the low positives. We have documented the feasibility of an affordable formate strip test for bedside diagnosis of methanol poisoning and for screening of metabolic acidosis of unknown origin. Visual reading is possible, but a reader will improve reliability at lower levels of formate. Future studies are necessary to study the sensitivity and specificity towards other causes of metabolic acidosis and other acids present in human blood.

  15. Project Rio Blanco definition plan. Additional formation evaluation and production testing

    International Nuclear Information System (INIS)

    1975-09-01

    Since the multiple Rio Blanco detonation three reentry wells have been drilled for test purposes: RB-E-01 (Emplacement Well); RB-AR-2 (Alternate Reentry Well); and RB-U-4 (Formation Evaluation Well). Additional testing in all these wells is now required to resolve some remaining technical questions. A plan describing the procedures, methods, responsibilities, and scheduling of the field operations is presented

  16. Design and performance testing of the 5 degree of freedom formation flying sensor

    NARCIS (Netherlands)

    Verlaan, A.L.; Cuylle, S.H.

    2008-01-01

    Formation flying of spacecraft nowadays is acknowledged to be an important technology for many future space missions. TNO underlines the importance and has therefore designed and tested a general use sensor system that is modular and can be used and adapted to the specific needs of a variety of

  17. Psychometric Properties of Raw and Scale Scores on Mixed-Format Tests

    Science.gov (United States)

    Kolen, Michael J.; Lee, Won-Chan

    2011-01-01

    This paper illustrates that the psychometric properties of scores and scales that are used with mixed-format educational tests can impact the use and interpretation of the scores that are reported to examinees. Psychometric properties that include reliability and conditional standard errors of measurement are considered in this paper. The focus is…

  18. A Dataset of Three Educational Technology Experiments on Differentiation, Formative Testing and Feedback

    Science.gov (United States)

    Haelermans, Carla; Ghysels, Joris; Prince, Fernao

    2015-01-01

    This paper describes a dataset with data from three individually randomized educational technology experiments on differentiation, formative testing and feedback during one school year for a group of 8th grade students in the Netherlands, using administrative data and the online motivation questionnaire of Boekaerts. The dataset consists of pre-…

  19. The Effect of Formative Testing and Self-Directed Learning on Mathematics Learning Outcomes

    Science.gov (United States)

    Sumantri, Mohamad Syarif; Satriani, Retni

    2016-01-01

    The purpose of this research was to determine the effect of formative testing and self-directed learning on mathematics learning outcomes. The research was conducted at an elementary school in central Jakarta during the 2014/2015 school year. Seventy-two fourth-grade students who were selected using random sampling participated in this study. Data…

  20. Investigation of gas hydrate-bearing sandstone reservoirs at the "Mount Elbert" stratigraphic test well, Milne Point, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Boswell, R.M.; Hunter, R. (ASRC Energy Services, Anchorage, AK); Collett, T. (USGS, Denver, CO); Digert, S. (BP Exploration (Alaska) Inc., Anchorage, AK); Hancock, S. (RPS Energy Canada, Calgary, Alberta, Canada); Weeks, M. (BP Exploration (Alaska) Inc., Anchorage, AK); Mt. Elbert Science Team

    2008-01-01

    In February 2007, the U.S. Department of Energy, BP Exploration (Alaska), Inc., and the U.S. Geological Survey conducted an extensive data collection effort at the "Mount Elbert #1" gas hydrates stratigraphic test well on the Alaska North Slope (ANS). The 22-day field program acquired significant gas hydrate-bearing reservoir data, including a full suite of open-hole well logs, over 500 feet of continuous core, and open-hole formation pressure response tests. Hole conditions, and therefore log data quality, were excellent due largely to the use of chilled oil-based drilling fluids. The logging program confirmed the existence of approximately 30 m of gashydrate saturated, fine-grained sand reservoir. Gas hydrate saturations were observed to range from 60% to 75% largely as a function of reservoir quality. Continuous wire-line coring operations (the first conducted on the ANS) achieved 85% recovery through 153 meters of section, providing more than 250 subsamples for analysis. The "Mount Elbert" data collection program culminated with open-hole tests of reservoir flow and pressure responses, as well as gas and water sample collection, using Schlumberger's Modular Formation Dynamics Tester (MDT) wireline tool. Four such tests, ranging from six to twelve hours duration, were conducted. This field program demonstrated the ability to safely and efficiently conduct a research-level openhole data acquisition program in shallow, sub-permafrost sediments. The program also demonstrated the soundness of the program's pre-drill gas hydrate characterization methods and increased confidence in gas hydrate resource assessment methodologies for the ANS.

  1. 78 FR 5765 - Wireline Competition Bureau Releases Connect America Phase II Cost Model Virtual Workshop...

    Science.gov (United States)

    2013-01-28

    ... of capital investments; determining the sharing factor for outside plant; plant mix; labor-cost... for people with disabilities (braille, large print, electronic files, audio format), send an email to...

  2. The impact of formative testing on study behaviour and study performance of (bio)medical students: a smartphone application intervention study.

    NARCIS (Netherlands)

    Lameris, A.L.L.; Hoenderop, J.G.J.; Bindels, R.J.M.; Eijsvogels, T.M.H.

    2015-01-01

    BACKGROUND: Formative testing can increase knowledge retention but students often underuse available opportunities. Applying modern technology to make the formative tests more attractive for students could enhance the implementation of formative testing as a learning tool. This study aimed to

  3. Autonomous Close Formation Flight Control with Fixed Wing and Quadrotor Test Beds

    Directory of Open Access Journals (Sweden)

    Caleb Rice

    2016-01-01

    Full Text Available Autonomous formation flight is a key approach for reducing energy cost and managing traffic in future high density airspace. The use of Unmanned Aerial Vehicles (UAVs has allowed low-budget and low-risk validation of autonomous formation flight concepts. This paper discusses the implementation and flight testing of nonlinear dynamic inversion (NLDI controllers for close formation flight (CFF using two distinct UAV platforms: a set of fixed wing aircraft named “Phastball” and a set of quadrotors named “NEO.” Experimental results show that autonomous CFF with approximately 5-wingspan separation is achievable with a pair of low-cost unmanned Phastball research aircraft. Simulations of the quadrotor flight also validate the design of the NLDI controller for the NEO quadrotors.

  4. Early stages of test formation in larva of Ascidia malaca (Tunicata, Ascidiacea): ultrastructural and cytochemical investigations.

    Science.gov (United States)

    Dolcemascolo, Giuseppe; Gianguzza, Mario

    2004-01-01

    The swimming larvae of ascidians are entirely covered by a hyalin coat called tunic, or test. This covering consists of two cuticular layers, C1 and C2, which surround an inner compartment composed of an amorphous hyalin matrix with numerous fibrils dispersed inside. Data from the literature agree on the key role played by the cells of the larval ectodermic layer in the synthesis and secretion of larval test components. In the present article are reported ultrastructural and cytochemical investigations made during test formation in the swimming larva of Ascidia malaca. Besides confirming the role played by ectodermic cells during the early stages of test formation, the investigations highlight the way in which the fibrillar component of the test is synthetized and secreted. At the ultrastructural level it has been evidenced that the C1 and C2 cuticular layers originate from the tight packing of fibrils. Based on the data reported in the present study, it is hypothesized that while a relevant part of the fibrils, once secreted, remains dispersed inside the matrix of the inner compartment of the test, quite likely in order to increase its consistency, packing of the remaining fibrils leads to the formation of the C1 and C2 cuticular layers. Packing of the fibrils in C1 and C2 could be favoured by their chemically adhesive nature. This hypothesis is strongly supported by the herewith reported results of the cytochemical investigations carried out on the test of the swimming larva of A. malaca. The cytochemical PA-TCH-SP reaction has in fact evidenced that both fibril types, i.e. those dispersed inside the inner compartment and those packed in the C1 and C2 cuticular layers, are constituted by glycoproteins and/or proteoglycans substances whose adhesive properties are well documented in the literature.

  5. Hydraulic Testing of Salado Formation Evaporites at the Waste Isolation Pilot Plant Site: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Beauheim, Richard L.; Domski, Paul S.; Roberts, Randall M.

    1999-07-01

    This report presents interpretations of hydraulic tests conducted in bedded evaporates of the Salado Formation from May 1992 through May 1995 at the Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico. The WIPP is a US Department of Energy research and development facility designed to demonstrate safe disposal of transuranic wastes from the nation's defense programs. The WIPP disposal horizon is located in the lower portion of the Permian Salado Formation. The hydraulic tests discussed in this report were performed in the WIPP underground facility by INTERA inc. (now Duke Engineering and Services, Inc.), Austin, Texas, following the Field Operations Plan and Addendum prepared by Saulnier (1988, 1991 ) under the technical direction of Sandia National Laboratories, Albuquerque, New Mexico.

  6. Reservoir Characterization for CO{sub 2} Sequestration: Assessing the Potential of the Devonian Carbonate Nisku Formation of Central Alberta; Caracterisation de reservoir en vue du stockage geologique de CO{sub 2}: evaluation du potentiel offert par les carbonates devoniens de la formation de Nisku, en Alberta central

    Energy Technology Data Exchange (ETDEWEB)

    Eisinger, C. [University of Calgary, Energy and Environmental Systems Group, 2500 University Drive NW, Calgary, AB T2N 1N4 (Canada); Jensen, J. [University of Calgary, Department of Chemical and Petroleum Engineering, 2500 University Drive NW, Calgary, AB T2N 1N4 (Canada)

    2011-07-01

    The Wabamun Lake area of Central Alberta, Canada includes several large CO{sub 2} point source emitters, collectively producing more than 30 Mt annually. Previous studies established that deep saline aquifers beneath the Wabamun Lake area have good potential for the large-scale injection and storage of CO{sub 2}. This study reports on the characterization of the Devonian carbonate Nisku Formation for evaluation as a CO{sub 2} repository. Major challenges for characterization included sparse well and seismic data, poor quality flow tests, and few modern measurements. Wire-line porosity measurements were present in only one-third of the wells, so porosity and flow capacity (permeability-thickness) were estimated using wire-line electrical measurements. The Archie cementation factor appears to vary between 2 and 3, creating uncertainty when predicting porosity using the electrical measurements; however, high-porosity zones could be identified. The electrically-based flow capacity predictions showed more favorable values using a correlation with core than the relation based on drill stem and production tests. This behavior is expected, since the flow test flow capacities are less influenced by local occurrences of very permeable vuggy and moldic rocks. Facies distributions were modeled using both pixel and object methods. The object models, using dimensions obtained from satellite imaging of modern day environments, gave results that were more consistent with the geological understanding of the Nisku and showed greater large-scale connectivity than the pixel model. Predicted volumes show considerable storage capacity in the Nisku, but flow simulations suggest injection capacities are below an initial 20 Mt/year target using vertical wells. More elaborate well designs, including fracture stimulation or multi-lateral wells may allow this goal to be reached or surpassed. (authors)

  7. Galactic Archaeology with TESS: Prospects for Testing the Star Formation History in the Solar Neighbourhood

    Science.gov (United States)

    Thomas, Alexandra; Stevenson, Emma; Gittins, Fabian W. R.; Miglio, Andrea; Davies, Guy; Girardi, Léo; Campante, Tiago L.; Schofield, Mathew

    2017-10-01

    A period of quenching between the formation of the thick and thin disks of the Milky Way has been recently proposed to explain the observed age-[α/Fe] distribution of stars in the solar neighbourhood. However, robust constraints on stellar ages are currently available for only a limited number of stars. The all-sky survey TESS (Transiting Exoplanet Survey Satellite) will observe the brightest stars in the sky and thus can be used to investigate the age distributions of stars in these components of the Galaxy via asteroseismology, where previously this has been diffcult using other techniques. The aim of this preliminary study was to determine whether TESS will be able to provide evidence for quenching periods during the star formation history of the Milky Way. Using a population synthesis code, we produced populations based on various stellar formation history models and limited the analysis to red-giant-branch stars. We investigated the mass-Galactic-disk-height distributions, where stellar mass was used as an age proxy, to test for whether periods of quenching can be observed by TESS. We found that even with the addition of 15% noise to the inferred masses, it will be possible for TESS to find evidence for/against quenching periods suggested in the literature (e.g. between 7 and 9 Gyr ago), therefore providing stringent constraints on the formation and evolution of the Milky Way.

  8. REAL-TIME TRACER MONITORING OF RESERVOIR STIMULATION PROCEDURES VIA ELECTRONIC WIRELINE AND TELEMETRY DATA TRANSMISSION

    Energy Technology Data Exchange (ETDEWEB)

    George Scott III

    2003-08-01

    Ongoing Phase 2-3 work comprises the final development and field-testing of two complementary real-time reservoir technologies; a stimulation process and a tracer fracturing diagnostic system. Initial DE-FC26-99FT40129 project work included research, development, and testing of the patented gamma tracer fracturing diagnostic system. This process was field-proven to be technically useful in providing tracer measurement of fracture height while fracturing; however, technical licensing restrictions blocked Realtimezone from fully field-testing this real-time gamma diagnostic system, as originally planned. Said restrictions were encountered during Phase 2 field test work as result of licensing limitations and potential conflicts between service companies participating in project work, as related to their gamma tracer logging tool technology. Phase 3 work principally demonstrated field-testing of Realtimezone (RTZ) and NETL's Downhole-mixed Reservoir Stimulation process. Early on, the simplicity of and success of downhole-mixing was evident from well tests, which were made commercially productive. A downhole-mixed acid stimulation process was tested successfully and is currently commercially used in Canada. The fourth well test was aborted due to well bore conditions, and an alternate test project is scheduled April, 2004. Realtimezone continues to effectuate ongoing patent protection in the United States and foreign markets. In 2002, Realtimezone and the NETL licensed their United States patent to Halliburton Energy Services (HES). Additional licensing arrangements with other industry companies are anticipated in 2004-2005. Ongoing Phase 2 and Phase 3 field-testing continues to confirm applications of both real-time technologies. Technical data transfer to industry is ongoing via Internet tech-transfer and various industry presentations and publications including Society of Petroleum Engineers. These real-time enhanced stimulation procedures should significantly

  9. Use of Multi-Response Format Test in the Assessment of Medical Students' Critical Thinking Ability.

    Science.gov (United States)

    Mafinejad, Mahboobeh Khabaz; Arabshahi, Seyyed Kamran Soltani; Monajemi, Alireza; Jalili, Mohammad; Soltani, Akbar; Rasouli, Javad

    2017-09-01

    To evaluate students critical thinking skills effectively, change in assessment practices is must. The assessment of a student's ability to think critically is a constant challenge, and yet there is considerable debate on the best assessment method. There is evidence that the intrinsic nature of open and closed-ended response questions is to measure separate cognitive abilities. To assess critical thinking ability of medical students by using multi-response format of assessment. A cross-sectional study was conducted on a group of 159 undergraduate third-year medical students. All the participants completed the California Critical Thinking Skills Test (CCTST) consisting of 34 multiple-choice questions to measure general critical thinking skills and a researcher-developed test that combines open and closed-ended questions. A researcher-developed 48-question exam, consisting of 8 short-answers and 5 essay questions, 19 Multiple-Choice Questions (MCQ), and 16 True-False (TF) questions, was used to measure critical thinking skills. Correlation analyses were performed using Pearson's coefficient to explore the association between the total scores of tests and subtests. One hundred and fifty-nine students participated in this study. The sample comprised 81 females (51%) and 78 males (49%) with an age range of 20±2.8 years (mean 21.2 years). The response rate was 64.1%. A significant positive correlation was found between types of questions and critical thinking scores, of which the correlations of MCQ (r=0.82) and essay questions (r=0.77) were strongest. The significant positive correlations between multi-response format test and CCTST's subscales were seen in analysis, evaluation, inference and inductive reasoning. Unlike CCTST subscales, multi-response format test have weak correlation with CCTST total score (r=0.45, p=0.06). This study highlights the importance of considering multi-response format test in the assessment of critical thinking abilities of medical

  10. Use of Multi-Response Format Test in the Assessment of Medical Students’ Critical Thinking Ability

    Science.gov (United States)

    Mafinejad, Mahboobeh Khabaz; Monajemi, Alireza; Jalili, Mohammad; Soltani, Akbar; Rasouli, Javad

    2017-01-01

    Introduction To evaluate students critical thinking skills effectively, change in assessment practices is must. The assessment of a student’s ability to think critically is a constant challenge, and yet there is considerable debate on the best assessment method. There is evidence that the intrinsic nature of open and closed-ended response questions is to measure separate cognitive abilities. Aim To assess critical thinking ability of medical students by using multi-response format of assessment. Materials and Methods A cross-sectional study was conducted on a group of 159 undergraduate third-year medical students. All the participants completed the California Critical Thinking Skills Test (CCTST) consisting of 34 multiple-choice questions to measure general critical thinking skills and a researcher-developed test that combines open and closed-ended questions. A researcher-developed 48-question exam, consisting of 8 short-answers and 5 essay questions, 19 Multiple-Choice Questions (MCQ), and 16 True-False (TF) questions, was used to measure critical thinking skills. Correlation analyses were performed using Pearson’s coefficient to explore the association between the total scores of tests and subtests. Results One hundred and fifty-nine students participated in this study. The sample comprised 81 females (51%) and 78 males (49%) with an age range of 20±2.8 years (mean 21.2 years). The response rate was 64.1%. A significant positive correlation was found between types of questions and critical thinking scores, of which the correlations of MCQ (r=0.82) and essay questions (r=0.77) were strongest. The significant positive correlations between multi-response format test and CCTST’s subscales were seen in analysis, evaluation, inference and inductive reasoning. Unlike CCTST subscales, multi-response format test have weak correlation with CCTST total score (r=0.45, p=0.06). Conclusion This study highlights the importance of considering multi-response format test in

  11. The Impact of Testing on the Formation of Children's and Adults' False Memories.

    Science.gov (United States)

    Brackmann, Nathalie; Otgaar, Henry; Sauerland, Melanie; Howe, Mark L

    2016-01-01

    Witnesses are frequently questioned immediately following a crime. The effects of such testing on false recall are inconclusive: Testing may inoculate against subsequent misinformation or enhance false memory formation. We examined whether different types of processing can account for these discrepancies. Drawing from Fuzzy-trace and Associative-activation theories, immediate questions that trigger the processing of the global understanding of the event can heighten false memory rates. However, questions that trigger the processing of specific details can inoculate memories against subsequent misinformation. These effects were hypothesized to be more pronounced in children than in adults. Seven/eight-, 11/12-, 14/15-year-olds, and adults (N = 220) saw a mock-theft film and were tested immediately with meaning or item-specific questions. Test results on the succeeding day replicated classic misinformation and testing effects, although our processing hypothesis was not supported. Only adults who received meaning questions benefited from immediate testing and, across all ages, testing led to retrieval-enhanced suggestibility. © 2016 The Authors. Applied Cognitive Psychology Published by John Wiley & Sons, Ltd.

  12. Application of rosula-formation tests for determining man lymphocyte radiosensitivity

    International Nuclear Information System (INIS)

    Shchilik, Ts.; Krushevskij, E.; Endrzhejchak, V.

    1982-01-01

    Radiosensitivity of subpopulation of lymphocytes-T-lymphocytes and B-lymphocytes was studied to diagnose acute radiation disease as well as if radiosensitivity of any of them is more effective indication of irradiation as compared with absolute lymphocyte quantity. The investigations were carried on in vitro using blood of healthy men-donors at the age of 21-25. It is shown that absolute quantity of cells forming AE rosette in perapheral blood is a much better indication of irradiation as compared with absolute quantity of lymphocytes. Considerable significance of tests of rosette formation especially AE test is underlined. High test sensitivity and relative simplicity of accomplishment permit authors to recommend it for diagnostic purposes when revealing acute radiation disease including the stages of medicinal evacuation

  13. Digital Photonic Receivers for Wireless and Wireline Optical Fiber Transmission Links

    DEFF Research Database (Denmark)

    Guerrero Gonzalez, Neil

    This PhD thesis addresses the design and performance evaluation of digital photonic receivers in hybrid optical fiber-wireless transmission systems. The research results presented in this thesis are pioneering in two areas. First, it is shown the first experimental demonstration of automatic...... demodulation of signals with mixed modulation formats and bit rates in a single digital coherent photonic receiver. The demodulated signals were generated on baseband and optical phase-modulated (PM) radio-over-fiber (RoF) systems. Secondly, it is presented the first known analytical and numerical...... investigations on the performance of data-aided optical channel estimation based on constant-amplitude zero-autocorrelation (CAZAC) sequences for 112 Gb/s polarization-diversity coherent optical fiber transmission links. The benefits of introducing digital signal processing functions in optically envelope...

  14. Staphylococcus aureus biofilm formation and antibiotic susceptibility tests on polystyrene and metal surfaces.

    Science.gov (United States)

    Coraça-Huber, D C; Fille, M; Hausdorfer, J; Pfaller, K; Nogler, M

    2012-06-01

    We compared the MBEC™-HTP assay plates made of polystyrene with metal discs composed of TMZF(®) and CrCo as substrates for biofilm formation. Staphylococcus aureus was grown on polystyrene and on metal discs made of titanium and chrome-cobalt. Antibiotic susceptibility was assessed by examining the recovery of cells after antibiotic exposure and by measuring the biofilm inhibitory concentration (BIC). The minimal inhibitory concentration (MIC) was assessed with planktonic cells. Bacterial growth was examined by scanning electron microscopy. The antibiotic concentration for biofilm inhibition (BIC) was higher than the MIC for all antibiotics. Microscopic images showed the biofilm structure characterized by groups of cells covered by a film. All models allowed biofilm formation and testing with several antibiotics in vitro. Gentamicin and rifampicin are the most effective inhibitors of Staph. aureus biofilm-related infections. We recommend MBEC™-HTP assay for rapid testing of multiple substances and TMZF(®) and CrCo discs for low-throughput testing of antibiotic susceptibility and for microscopic analysis. In vitro assays can improve the understanding of biofilms and help developing methods to eliminate biofilms from implant surfaces. One advantage of the TMZF(®) and CrCo discs as biofilm in vitro assay is that these metals are commonly used for orthopaedic implants. These models are usable for future periprosthetic joint infection studies. © 2012 The Authors. Journal of Applied Microbiology © 2012 The Society for Applied Microbiology.

  15. Studies of water-in-oil emulsions : testing of emulsion formation in OHMSETT

    International Nuclear Information System (INIS)

    Fingas, M.; Fieldhouse, B.

    2001-01-01

    A study was conducted to determine the stability of water-in-oil emulsions in the OHMSETT tank facility. The results were then compared with previous laboratory studies which suggested that the stability of emulsions can be grouped into four categories, stable, unstable, meso-stable and entrained. It has been determined that entrained emulsions can retain oil by viscous forces long enough for interfacial agents, resins and asphaltenes to stabilize the droplets. This paper also described the difference in viscosity between the 4 categories of emulsion stability. The OHMSETT tests were conducted in two series of one week each. The first series of tests were conducted in July and involved 12 experiments on 2 different types of oils which were placed at varying thicknesses on the water. The second set of tests were conducted in November and involved 12 experiments on 6 oils. The rheological properties of the oils were measured and compared to the same oils undergoing emulsification in the laboratory. The oils and water-in-oil states produced were found to have analogous properties between the laboratory and the first set of tests at the OHMSETT facility. All the oils tested produced entrained water-in-oil states in both the laboratory and the test tank. The energy in the two test conditions was found to be similar, with the OHMSETT emulsions similar to one produced in the laboratory at high energies. The second series of tests at OHMSETT did not result in the expected water in-oil- states. This unexpected result was most likely due to the residual surfactant from an earlier dispersant experiment. The study showed that the conditions for emulsion formation are analogous in the OHMSETT tank and in the laboratory tests. The level of energy is considered to be the major variant. It was concluded that the energy levels between the laboratory mixing experiments and the OHMSETT is similar. It was shown that surfactants left over from dispersant testing inhibited the formation

  16. Wind and Wake Sensing with UAV Formation Flight: System Development and Flight Testing

    Science.gov (United States)

    Larrabee, Trenton Jameson

    sensing data using UAVs in formation flight. This has been achieved and well documented before in manned aircraft but very little work has been done on UAV wake sensing especially during flight testing. This document describes the development and flight testing of small unmanned aerial system (UAS) for wind and wake sensing purpose including a Ground Control Station (GCS) and UAVs. This research can be stated in four major components. Firstly, formation flight was obtained by integrating a formation flight controller on the WVU Phastball Research UAV aircraft platform from the Flight Control Systems Laboratory (FCSL) at West Virginia University (WVU). Second, a new approach to wind estimation using an Unscented Kalman filter (UKF) is discussed along with results from flight data. Third, wake modeling within a simulator and wake sensing during formation flight is shown. Finally, experimental results are used to discuss the "sweet spot" for energy harvesting in formation flight, a novel approach to cooperative wind estimation, and gust suppression control for a follower aircraft in formation flight.

  17. Thermal and topographic tests of Europa chaos formation models from Galileo E15 observations

    Science.gov (United States)

    Nimmo, F.; Giese, B.

    2005-10-01

    Stereo topography of an area near Tyre impact crater, Europa, reveals chaos regions characterised by marginal cliffs and domical topography, rising to 100-200 m above the background plains. The regions contain blocks which have both rotated and tilted. We tested two models of chaos formation: a hybrid diapir model, in which chaos topography is caused by thermal or compositional buoyancy, and block motion occurs due to the presence of near-surface (1-3 km) melt; and a melt-through model, in which chaos regions are caused by melting and refreezing of the ice shell. None of the hybrid diapir models tested generate any melt within 1-3 km of the surface, owing to the low surface temperature. A model of ocean refreezing following melt-through gives effective elastic thicknesses and ice shell thicknesses of 0.1-0.3 and 0.5-2 km, respectively. However, for such low shell thicknesses the refreezing model requires implausibly large lateral density contrasts (50-100 kg m -3) to explain the elevation of the centres of the chaos regions. Although a global equilibrium ice shell thickness of ≈2 km is possible if Europa's mantle resembles that of Io, it is unclear whether local melt-through events are energetically possible. Thus, neither of the models tested here gives a completely satisfactory explanation for the formation of chaos regions. We suggest that surface extrusion of warm ice may be an important component of chaos terrain formation, and demonstrate that such extrusion is possible for likely ice parameters.

  18. Reduction of Chlorinated Dibenzodioxin and Dibenzofuran Formation in the Beilstein Test

    Science.gov (United States)

    Goldfarb, Theodore D.; Fontana, Sabine G.

    1997-07-01

    We have confirmed that significant amounts of the highly toxic polychlorinated dibenzodioxins (PCDDs) and dibenzofurans (PCDFs) may be formed under the conditions by which the Beilstein test for halogenated organic compounds is commonly employed in undergraduate laboratories. In this paper we describe the results of studies designed to increase the safety of the Beilstein test by minimizing the production of these toxins. Simple adjustments in Bunsen burner temperature and the length of time the copper test loop is exposed to the flame were found to be ineffective. Diluting test compounds (which should not be direct precursors of dioxins or furans) to concentrations as low as 5g/L in solvents like methanol or acetone was found to reduce PCDD/F formation by a factor of approximately 103, while still producing definitive test results. Triethanolamine was found to be an effective inhibitor. The addition of 0.5 mL of this compound to 10-mg test samples lowered the toxicity of the gaseous effluent by more than two orders of magnitude.

  19. Galactic Archaeology with TESS: Prospects for Testing the Star Formation History in the Solar Neighbourhood

    Directory of Open Access Journals (Sweden)

    Thomas Alexandra

    2017-01-01

    proposed to explain the observed age-[α/Fe] distribution of stars in the solar neighbourhood. However, robust constraints on stellar ages are currently available for only a limited number of stars. The all-sky survey TESS (Transiting Exoplanet Survey Satellite will observe the brightest stars in the sky and thus can be used to investigate the age distributions of stars in these components of the Galaxy via asteroseismology, where previously this has been diffcult using other techniques. The aim of this preliminary study was to determine whether TESS will be able to provide evidence for quenching periods during the star formation history of the Milky Way. Using a population synthesis code, we produced populations based on various stellar formation history models and limited the analysis to red-giant-branch stars. We investigated the mass-Galactic-disk-height distributions, where stellar mass was used as an age proxy, to test for whether periods of quenching can be observed by TESS. We found that even with the addition of 15% noise to the inferred masses, it will be possible for TESS to find evidence for/against quenching periods suggested in the literature (e.g. between 7 and 9 Gyr ago, therefore providing stringent constraints on the formation and evolution of the Milky Way.

  20. UPTF-TRAM test A2. Formation of stratified flow in the hot leg

    International Nuclear Information System (INIS)

    Tenckhoff; Brand, B.; Weiss, P.

    1992-10-01

    The separate effect UPTF TRAM Test A2 consisting of six runs was designed to investigate flow regimes in the hot leg of a pressurized water reactor under two-phase natural circulation conditions. In particular, the following phenomena were investigated: - Formation of different flow regimes, e.g. stratified and slug flow in the hot leg under different boundary conditions; -Correlation between flow regime and boundary conditions of the system (mass flows, water level etc.); - Mechanism of the transport of water into the steam generator. The test runs are divided into two groups: a) Test Runs 01a, 01b and 02b with steam injection through the core simulator: In these test runs the steam injection through the core simulator was increased stepwise. In each step the steam injection was kept constant for about 100 s in order to observe steady water distribution in the hot leg and SG-simulator of broken loop. b) Test Runs 03c, 04c and 04d with steam and water injection through the core simulator: These test runs were performed at a constant steam injection rate and the water injection rate was increased stepwise. In order to verify the consistency of scaling with the pressure, the test runs were carried out at different pressures as: a) Runs 01a and 01b at 15 bar, and Run 02b at 3 bar b) Runs 03c, 04c and 04d at 15, 3 and 5 bar respectively. A preliminary evaluation of the test is presented in the Quick Look Report. (orig.) [de

  1. Testing models for the formation of the equatorial ridge on Iapetus via crater counting

    Science.gov (United States)

    Damptz, Amanda L.; Dombard, Andrew J.; Kirchoff, Michelle R.

    2018-03-01

    Iapetus's equatorial ridge, visible in global views of the moon, is unique in the Solar System. The formation of this feature is likely attributed to a key event in the evolution of Iapetus, and various models have been proposed as the source of the ridge. By surveying imagery from the Cassini and Voyager missions, this study aims to compile a database of the impact crater population on and around Iapetus's equatorial ridge, assess the relative age of the ridge from differences in cratering between on ridge and off ridge, and test the various models of ridge formation. This work presents a database that contains 7748 craters ranging from 0.83 km to 591 km in diameter. The database includes the study area in which the crater is located, the latitude and longitude of the crater, the major and minor axis lengths, and the azimuthal angle of orientation of the major axis. Analysis of crater orientation over the entire study area reveals that there is no preference for long-axis orientation, particularly in the area with the highest resolution. Comparison of the crater size-frequency distributions show that the crater distribution on the ridge appears to be depleted in craters larger than 16 km with an abruptly enhanced crater population less than 16 km in diameter up to saturation. One possible interpretation is that the ridge is a relatively younger surface with an enhanced small impactor population. Finally, the compiled results are used to examine each ridge formation hypothesis. Based on these results, a model of ridge formation via a tidally disrupted sub-satellite appears most consistent with our interpretation of a younger ridge with an enhanced small impactor population.

  2. Environmental Assessment: Geothermal Energy Geopressure Subprogram. Gulf Coast Well Testing Activity, Frio Formation, Texas and Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-02-01

    This Environmental Assessment (EA) has been prepared to provide the environmental input into the Division of Geothermal Energy's decisions to expand the geothermal well testing activities to include sites in the Frio Formation of Texas and Louisiana. It is proposed that drilling rigs be leased before they are removed from sites in the formation where drilling for gas or oil exploration has been unsuccessful and that the rigs be used to complete the drilling into the geopressured zone for resource exploration. This EA addresses, on a regional basis, the expected activities, affected environment, and the possible impacts in a broad sense as they apply to the Gulf Coast well testing activity of the Geothermal Energy Geopressure Subprogram of the Department of Energy. Along the Texas and Louisiana Gulf Coast (Plate 1 and Overlay, Atlas) water at high temperatures and high pressures is trapped within Gulf basin sediments. The water is confined within or below essentially impermeable shale sequences and carries most or all of the overburden pressure. Such zones are referred to as geopressured strata. These fluids and sediments are heated to abnormally high temperatures (up to 260 C) and may provide potential reservoirs for economical production of geothermal energy. The obvious need in resource development is to assess the resource. Ongoing studies to define large-sand-volume reservoirs will ultimately define optimum sites for drilling special large diameter wells to perform large volume flow production tests. in the interim, existing well tests need to be made to help define and assess the resource.

  3. An exploratory study into the impact and acceptability of formatively used progress testing in postgraduate obstetrics and gynaecology.

    Science.gov (United States)

    Dijksterhuis, Marja G K; Schuwirth, Lambert W T; Braat, Didi D M; Scheele, Fedde

    2013-06-01

    Part of recent reforms of postgraduate medical training in the Netherlands is the introduction of formatively intended knowledge testing or progress testing. We previously evaluated the construct validity and reliability of postgraduate progress testing. However, when assessment is intended to be formative, the acceptability of the test (scores) and the educational impact that is achieved are at least as important in the utility of this assessment format. We developed a questionnaire targeted at both educational supervisors and postgraduate trainees, containing questions on general acceptability, educational impact and acceptability of test content. 90 % of trainees and 84 % of educational supervisors completed the questionnaire. The general acceptability of formatively used progress testing is good; however, the self-reported educational impact is limited. Furthermore, trainees query the validity of test content. Formatively intended progress testing is well accepted; however the impact is limited. We discuss the importance of feedback quality and the effect of grading. Furthermore we start a debate on whether, for a genuine effect on learning, formative assessment should have consequences, either by entwining the assessment with the training programme or by linking the assessment to a summative standard.

  4. High Energy Gas Fracturing Test

    Energy Technology Data Exchange (ETDEWEB)

    Schulte, R.

    2001-02-27

    The Rocky Mountain Oilfield Testing Center (RMOTC) has recently completed two tests of a high-energy gas fracturing system being developed by Western Technologies of Crossville, Tennessee. The tests involved the use of two active wells located at the Naval Petroleum Reserve No. 3 (NPR-3), thirty-five miles north of Casper, Wyoming (See Figure 1). During the testing process the delivery and operational system was enhanced by RMOTC, Western Technologies, and commercial wireline subcontractors. RMOTC has assisted an industrial client in developing their technology for high energy gas fracturing to a commercial level. The modifications and improvements implemented during the technology testing process are instrumental in all field testing efforts at RMOTC. The importance of well selection can also be critical in demonstrating the success of the technology. To date, significant increases in well productivity have been clearly proven in well 63-TPX-10. Gross fluid production was initially raised by a factor of three. Final production rates increased by a factor of six with the use of a larger submersible pump. Well productivity (bbls of fluid per foot of drawdown) increased by a factor of 15 to 20. The above results assume that no mechanical damage has occurred to the casing or cast iron bridge plug which could allow well production from the Tensleep ''B'' sand. In the case of well 61-A-3, a six-fold increase in total fluid production was seen. Unfortunately, the increase is clouded by the water injection into the well that was necessary to have a positive fluid head on the propellant tool. No significant increase in oil production was seen. The tools which were retrieved from both 63-TPX-10 and 61-A-3 indicated a large amount of energy, similar to high gram perforating, had been expended downhole upon the formation face.

  5. Midwest Regional Carbon Sequestration Partnership Appalachian Basin Test Site: Developing a Sequestration Site from Concept through Injection

    Science.gov (United States)

    Gerst, J. L.; Place, M.; Sminchak, J.; Gupta, N.; Sullivan, C.

    2008-12-01

    The Midwest Regional Carbon Sequestration Partnership (MRCSP) Appalachian Basin Field Test is located at the First Energy Generation Corp. RE Burger Power Plant in Belmont County, Ohio. The goal at this site is to injection up to 3000 tonnes of carbon dioxide in up to three separate geologic formations. We present the development of this injection plan as more data was collected and added to the system. In addition, we present initial injection results. Site characterization consisted of a regional geological assessment and a 2D seismic survey. A test injection well (FEGENCO 1) was completed in early 2007 and data collected from this well, included geophysical wireline logs and core samples, were used to develop an injection plan. Two previously identified injection targets were analyzed, the Devonian Oriskany Sandstone and the Silurian Clinton Sandstone. Both of these sandstones are regional sequestration targets across the Midwestern United States. In addition to these, a third injection target was identified after drilling. The Silurian Salina Group is regionally extensive throughout most of the Midwest and consists of carbonate and evaporate layers. In the FEGENCO 1 well, one of the subgroups was found to have higher porosity dolomitic stringers sandwiched between anhydrite layers. Wireline data and field samples were used to better understand the geologic model and predict the porosity and permeability distribution of the interval. Injection is expected to be completed by Fall 2008. This work was done as part of the Midwest Regional Carbon Sequestration Partnership (MRCSP); DOE/NETL Cooperative Agreement No. DE-FC26-05NT42589

  6. Wormholes propagation for fractured-vuggy formation: Laboratory tests, numerical simulation and field application

    Directory of Open Access Journals (Sweden)

    Fei Liu

    2017-12-01

    Full Text Available The propagation of wormhole is vital important for matrix acidizing and acid fracturing in carbonate reservoirs. While the formation of acid dissolved wormhole is derived from heterogeneous physical and chemical transportations and reactions. Alveolate dissolved pores, krast caves, and natural fissures are the major reservoir spaces for the Sinian dolomite formation in the Anyue gas field of the Sichuan Basin. There were four categories of formation, which are matrix dominated, inter-breccia dissolved pore dominated, dissolved pore and cave dominated, and fissure and cave dominated, based on the development intensity and connectedness of caves and fissures. The caves and fissures make the wormhole formation and propagation particularly complicated. Firstly, the 3-D topological structure of dissolved pores, vugs, fissures and throats inside cores is quantitatively scanned by CT imaging technology for its feature of vivid and damage-free. Secondly, 3-D patterns of wormhole are obtained with CT scanning after core flooding by acid. Additionally, the pore-throat network model is reconstructed with digital cores technology. Then, the size and ratio of pore and throat before and after core flooding by acid is analyzed and the absolute permeability of pore scale flow is numerically simulated to understand the fundamental influence of pores and vugs distribution and connectedness on wormhole propagation. Lastly, the wormhole pattern gained by CT scanning and simulating with two-scale model is compared. Meanwhile, the corrected two-scale model is utilized to simulate the wormhole propagation for matrix acidizing and acid fracturing of Sinian fractured-vuggy dolomite in Anyue gas field, Sichuan Basin. The optimized injection rate and volume were in agreement with the characteristic matrix acidizing operating curve, which indicates that the two-scale model was suitable for matrix acidizing optimization design of such formations. In addition, the simulated

  7. A Test of the Interstellar Boundary EXplorer Ribbon Formation in the Outer Heliosheath

    Energy Technology Data Exchange (ETDEWEB)

    Gamayunov, Konstantin V.; Rassoul, Hamid [Department of Physics and Space Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States); Heerikhuisen, Jacob, E-mail: kgamayunov@fit.edu [Department of Space Science, University of Alabama in Huntsville, Huntsville, AL 35899 (United States)

    2017-08-10

    NASA’s Interstellar Boundary EXplorer ( IBEX ) mission is imaging energetic neutral atoms (ENAs) propagating to Earth from the outer heliosphere and local interstellar medium (LISM). A dominant feature in all ENA maps is a ribbon of enhanced fluxes that was not predicted before IBEX . While more than a dozen models of the ribbon formation have been proposed, consensus has gathered around the so-called secondary ENA model. Two classes of secondary ENA models have been proposed; the first class assumes weak scattering of the energetic pickup protons in the LISM, and the second class assumes strong but spatially localized scattering. Here we present a numerical test of the “weak scattering” version of the secondary ENA model using our gyro-averaged kinetic model for the evolution of the phase-space distribution of protons in the outer heliosheath. As input for our test, we use distributions of the primary ENAs from our MHD-plasma/kinetic-neutral model of the heliosphere-LISM interaction. The magnetic field spectrum for the large-scale interstellar turbulence and an upper limit for the amplitude of small-scale local turbulence (SSLT) generated by protons are taken from observations by Voyager 1 in the LISM. The hybrid simulations of energetic protons are also used to set the bounding wavenumbers for the spectrum of SSLT. Our test supports the “weak scattering” version. This makes an additional solid step on the way to understanding the origin and formation of the IBEX ribbon and thus to improving our understanding of the interaction between the heliosphere and the LISM.

  8. Constructed-Response DIF Evaluations for Mixed-Format Tests. Research Report. ETS RR-13-33

    Science.gov (United States)

    Moses, Tim; Liu, Jinghua; Tan, Adele; Deng, Weiling; Dorans, Neil J.

    2013-01-01

    In this study, differential item functioning (DIF) methods utilizing 14 different matching variables were applied to assess DIF in the constructed-response (CR) items from 6 forms of 3 mixed-format tests. Results suggested that the methods might produce distinct patterns of DIF results for different tests and testing programs, in that the DIF…

  9. Decoupling degradation in exciton formation and recombination during lifetime testing of organic light-emitting devices

    Science.gov (United States)

    Hershey, Kyle W.; Suddard-Bangsund, John; Qian, Gang; Holmes, Russell J.

    2017-09-01

    The analysis of organic light-emitting device degradation is typically restricted to fitting the overall luminance loss as a function of time or the characterization of fully degraded devices. To develop a more complete understanding of degradation, additional specific data are needed as a function of luminance loss. The overall degradation in luminance during testing can be decoupled into a loss in emitter photoluminescence efficiency and a reduction in the exciton formation efficiency. Here, we demonstrate a method that permits separation of these component efficiencies, yielding the time evolution of two additional specific device parameters that can be used in interpreting and modeling degradation without modification to the device architecture or introduction of any additional post-degradation characterization steps. Here, devices based on the phosphor tris[2-phenylpyridinato-C2,N]iridium(III) (Ir(ppy)3) are characterized as a function of initial luminance and emissive layer thickness. The overall loss in device luminance is found to originate primarily from a reduction in the exciton formation efficiency which is exacerbated in devices with thinner emissive layers. Interestingly, the contribution to overall degradation from a reduction in the efficiency of exciton recombination (i.e., photoluminescence) is unaffected by thickness, suggesting a fixed exciton recombination zone width and degradation at an interface.

  10. Theories of coalition formation: An empirical test using data from Danish local government

    DEFF Research Database (Denmark)

    Skjæveland, Asbjørn; Serritzlew, Søren; Blom-Hansen, Jens

    2007-01-01

    on an expert survey of almost 3,000 local councillors from all municipalities in Denmark. They use conditional logit analysis to model government formation as a discrete choice between all potential governments. The analysis confirms some, but far from all, traditional explanations such as those based...... problem present in many coalition studies - namely that the theories are tested on data of national government coalitions in postwar Europe: the very data that gave rise to the theories in the first place. Instead, the authors focus on government coalitions at the municipal level. They base their analysis...... on office and policy motives. At the same time, the analysis raises the question of whether actors really seek minimal coalitions....

  11. plink: An R Package for Linking Mixed-Format Tests Using IRT-Based Methods

    Directory of Open Access Journals (Sweden)

    Jonathan P. Weeks

    2010-10-01

    Full Text Available The R package plink has been developed to facilitate the linking of mixed-format tests for multiple groups under a common item design using unidimensional and multidimensional IRT-based methods. This paper presents the capabilities of the package in the context of the unidimensional methods. The package supports nine unidimensional item response models (the Rasch model, 1PL, 2PL, 3PL, graded response model, partial credit and generalized partial credit model, nominal response model, and multiple-choice model and four separate calibration linking methods (mean/sigma, mean/mean, Haebara, and Stocking-Lord. It also includes functions for importing item and/or ability parameters from common IRT software, conducting IRT true-score and observed-score equating, and plotting item response curves and parameter comparison plots.

  12. Analysis of formation pressure test results in the Mount Elbert methane hydrate reservoir through numerical simulation

    Science.gov (United States)

    Kurihara, M.; Sato, A.; Funatsu, K.; Ouchi, H.; Masuda, Y.; Narita, H.; Collett, T.S.

    2011-01-01

    Targeting the methane hydrate (MH) bearing units C and D at the Mount Elbert prospect on the Alaska North Slope, four MDT (Modular Dynamic Formation Tester) tests were conducted in February 2007. The C2 MDT test was selected for history matching simulation in the MH Simulator Code Comparison Study. Through history matching simulation, the physical and chemical properties of the unit C were adjusted, which suggested the most likely reservoir properties of this unit. Based on these properties thus tuned, the numerical models replicating "Mount Elbert C2 zone like reservoir" "PBU L-Pad like reservoir" and "PBU L-Pad down dip like reservoir" were constructed. The long term production performances of wells in these reservoirs were then forecasted assuming the MH dissociation and production by the methods of depressurization, combination of depressurization and wellbore heating, and hot water huff and puff. The predicted cumulative gas production ranges from 2.16??106m3/well to 8.22??108m3/well depending mainly on the initial temperature of the reservoir and on the production method.This paper describes the details of modeling and history matching simulation. This paper also presents the results of the examinations on the effects of reservoir properties on MH dissociation and production performances under the application of the depressurization and thermal methods. ?? 2010 Elsevier Ltd.

  13. Integrating data-based decision making, Assessment for Learning and diagnostic testing in formative assessment

    NARCIS (Netherlands)

    van der Kleij, Fabienne; Vermeulen, Jorine; Schildkamp, Kim; Eggen, Theodorus Johannes Hendrikus Maria

    2015-01-01

    Recent research has highlighted the lack of a uniform definition of formative assessment, although its effectiveness is widely acknowledged. This paper addresses the theoretical differences and similarities amongst three approaches to formative assessment that are currently most frequently discussed

  14. Practical Consequences of Item Response Theory Model Misfit in the Context of Test Equating with Mixed-Format Test Data.

    Science.gov (United States)

    Zhao, Yue; Hambleton, Ronald K

    2017-01-01

    In item response theory (IRT) models, assessing model-data fit is an essential step in IRT calibration. While no general agreement has ever been reached on the best methods or approaches to use for detecting misfit, perhaps the more important comment based upon the research findings is that rarely does the research evaluate IRT misfit by focusing on the practical consequences of misfit. The study investigated the practical consequences of IRT model misfit in examining the equating performance and the classification of examinees into performance categories in a simulation study that mimics a typical large-scale statewide assessment program with mixed-format test data. The simulation study was implemented by varying three factors, including choice of IRT model, amount of growth/change of examinees' abilities between two adjacent administration years, and choice of IRT scaling methods. Findings indicated that the extent of significant consequences of model misfit varied over the choice of model and IRT scaling methods. In comparison with mean/sigma (MS) and Stocking and Lord characteristic curve (SL) methods, separate calibration with linking and fixed common item parameter (FCIP) procedure was more sensitive to model misfit and more robust against various amounts of ability shifts between two adjacent administrations regardless of model fit. SL was generally the least sensitive to model misfit in recovering equating conversion and MS was the least robust against ability shifts in recovering the equating conversion when a substantial degree of misfit was present. The key messages from the study are that practical ways are available to study model fit, and, model fit or misfit can have consequences that should be considered when choosing an IRT model. Not only does the study address the consequences of IRT model misfit, but also it is our hope to help researchers and practitioners find practical ways to study model fit and to investigate the validity of particular IRT

  15. Use of wireline logs at Cerro Prieto in identification of the distribution of hydrothermally altered zones and dike locations, and their correlation with reservoir temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Seamount, D.T. Jr.; Elders, W.A.

    1981-01-01

    Downhole electrical and gamma-gamma density logs from nine wells weere studed and these wireline log parameters with petrologic, temperature, and petrophysical data were correlated. Here, wells M-43, T-366, and M-107 are discussed in detail as typical cases. Log data for shales show good correlation with four zones of hydrothermal alteration previously recognized on the basis of characteristic mineral assemblages and temperatures. These zones are the unaltered montmorillonite zone (< 150/sup 0/C), the illite zone (150/sup 0/C to 230/sup 0/C to 245/sup 0/C), the chlorite zone (235/sup 0/C to 300/sup 0/C, equivalent to the calc-silicate I zone in sands), and the feldspar zone (> 300/sup 0/C, equivalent to the calc-silicate II zone in sands),

  16. A Robust Method of Measuring Other-Race and Other-Ethnicity Effects: The Cambridge Face Memory Test Format

    OpenAIRE

    McKone, Elinor; Stokes, Sacha; Liu, Jia; Cohan, Sarah; Fiorentini, Chiara; Pidcock, Madeleine; Yovel, Galit; Broughton, Mary; Pelleg, Michel

    2012-01-01

    Other-race and other-ethnicity effects on face memory have remained a topic of consistent research interest over several decades, across fields including face perception, social psychology, and forensic psychology (eyewitness testimony). Here we demonstrate that the Cambridge Face Memory Test format provides a robust method for measuring these effects. Testing the Cambridge Face Memory Test original version (CFMT-original; European-ancestry faces from Boston USA) and a new Cambridge Face Memo...

  17. Interaction of radionuclides with argillite from the Eleana Formation on the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Dosch, R.G.; Lynch, A.W.

    1979-02-01

    Distribution coefficients have been determined for {sup 137}Cs, {sup 85}Sr, {sup 144}Ce, {sup 99}Tc, {sup 152}Eu, {sup 238}Pu, {sup 244}Cm, and {sup 243}Am between argillite from the Eleana Formation on the Nevada Test Site (NTS) and several aqueous phases. Radionuclide concentrations in the range of 1 to 0.001 {mu}Ci/ml were used with contact times of 14, 28, and 56 days. Reaction mechanism, concentration effects, exchange capacity, equilibration times, and particle size effects were addressed in a more comprehensive study of the interaction of argillite with Cs in deionized water. The experimental parameters used in the distribution coefficient measurements were based in part on this work. The aqueous phases included a simulated groundwater with composition based on the analysis of a NTS groundwater, the same simulant and deionized water which were pre-equilibrated with powdered argillite, and a groundwater simulant with approximately the same qualitative composition of the NTS simulant, but with a higher ionic strength. A system to provide continuous pH control by CO{sub 2} addition during equilibration of the argillite-solution mixtures was designed and assembled. Initial experiments were done with Cs and Eu and the effects of pH on their distribution coefficients are discussed.

  18. Pedagogy of Science Teaching Tests: Formative assessments of science teaching orientations

    Science.gov (United States)

    Cobern, William W.; Schuster, David; Adams, Betty; Skjold, Brandy Ann; Zeynep Muğaloğlu, Ebru; Bentz, Amy; Sparks, Kelly

    2014-09-01

    A critical aspect of teacher education is gaining pedagogical content knowledge of how to teach science for conceptual understanding. Given the time limitations of college methods courses, it is difficult to touch on more than a fraction of the science topics potentially taught across grades K-8, particularly in the context of relevant pedagogies. This research and development work centers on constructing a formative assessment resource to help expose pre-service teachers to a greater number of science topics within teaching episodes using various modes of instruction. To this end, 100 problem-based, science pedagogy assessment items were developed via expert group discussions and pilot testing. Each item contains a classroom vignette followed by response choices carefully crafted to include four basic pedagogies (didactic direct, active direct, guided inquiry, and open inquiry). The brief but numerous items allow a substantial increase in the number of science topics that pre-service students may consider. The intention is that students and teachers will be able to share and discuss particular responses to individual items, or else record their responses to collections of items and thereby create a snapshot profile of their teaching orientations. Subsets of items were piloted with students in pre-service science methods courses, and the quantitative results of student responses were spread sufficiently to suggest that the items can be effective for their intended purpose.

  19. Deep-ocean field test of methane hydrate formation from a remotely operated vehicle

    Science.gov (United States)

    Brewer, Peter G.; Orr, Franklin M., Jr.; Friederich, Gernot; Kvenvolden, Keith A.; Orange, Daniel L.; McFarlane, James; Kirkwood, William

    1997-05-01

    We have observed the process of formation of clathrate hydrates of methane in experiments conducted on the remotely operated vehicle (ROV) Ventana in the deep waters of Monterey Bay. A tank of methane gas, acrylic tubes containing seawater, and seawater plus various types of sediment were carried down on Ventana to a depth of 910 m where methane gas was injected at the base of the acrylic tubes by bubble stream. Prior calculations had shown that the local hydrographic conditions gave an upper limit of 525 m for the P-T boundary defining methane hydrate formation or dissociation at this site, and thus our experiment took place well within the stability range for this reaction to occur. Hydrate formation in free seawater occurred within minutes as a buoyant mass of translucent hydrate formed at the gas-water interface. In a coarse sand matrix the filling of the pore spaces with hydrate turned the sand column into a solidified block, which gas pressure soon lifted and ruptured. In a fine-grained black mud the gas flow carved out flow channels, the walls of which became coated and then filled with hydrate in larger discrete masses. Our experiment shows that hydrate formation is rapid in natural seawater, that sediment type strongly influences the patterns of hydrate formation, and that the use of ROV technologies permits the synthesis of large amounts of hydrate material in natural systems under a variety of conditions so that fundamental research on the stability and growth of these substances is possible.

  20. A new format for multiple-choice testing: Discrete-Option Multiple-Choice. Results from early studies

    OpenAIRE

    DAVID FOSTER; HAROLD L. MILLER

    2009-01-01

    The standard multiple-choice format has remained relatively unchanged for nearly 100 years, even over the past 25 years as multiple-choice tests have been computerized. We introduce a unique version of the multiple-choice format that has the potential to improve a test’s measurement and security properties, along with other advantages. We summarize our research with college students on course-level exams to demonstrate these benefits and to establish the Discrete-Option Multiple-Choice (DOMC)...

  1. Modeling Local Item Dependence Due to Common Test Format with a Multidimensional Rasch Model

    Science.gov (United States)

    Baghaei, Purya; Aryadoust, Vahid

    2015-01-01

    Research shows that test method can exert a significant impact on test takers' performance and thereby contaminate test scores. We argue that common test method can exert the same effect as common stimuli and violate the conditional independence assumption of item response theory models because, in general, subsets of items which have a shared…

  2. Selected data for wells and test holes used in structure-contour maps of the Inyan Kara Group, Minnekahta Limestone, Minnelusa Formation, Madison Limestone, and Deadwood Formation in the Black Hills area, South Dakota

    Science.gov (United States)

    Carter, J.M.

    1999-01-01

    This report presents selected data on wells and test holes that were used in the construction of structure-contour maps of selected formations that contain major aquifers in the Black Hills area of western South Dakota. Altitudes of the top of the Inyan Kara Group, Minnekahta Limestone, Minnelusa Formation, Madison Limestone, and Deadwood Formation are presented for the wells and test holes presented in this report.

  3. Computer-Mediated Impression Formation: A Test of the Sticky Cues Model Using Facebook

    Science.gov (United States)

    Van Der Heide, Brandon Lee

    2009-01-01

    This research offers a model of online impression formation that explains how different impression-bearing cues may carry more or less informational value. This research considers the possibility that impression-bearing cues have greater informational value when those cues are distinctive and are task-relevant. This research refers to such cues as…

  4. Pilot test of cooperative learning format for training mental health researchers and black community leaders in partnership skills.

    Science.gov (United States)

    Laborde, Danielle J; Brannock, Kristen; Breland-Noble, Alfiee; Parrish, Theodore

    2007-12-01

    To support reduction of racial disparities in mental health diagnosis and treatment, mental health researchers and black community-based organization (CBO) leaders need training on how to engage in collaborative research partnerships. In this study, we pilot tested a series of partnership skills training modules for researchers and CBO leaders in a collaborative learning format. Two different sets of three modules, designed for separate training of researchers and CBO leaders, covered considering, establishing and managing mental health research partnerships and included instructions for self-directed activities and discussions. Eight CBO leaders participated in 10 sessions, and six researchers participated in eight sessions. The effectiveness of the training content and format was evaluated through standardized observations, focus group discussions, participant evaluation forms and retrospective pre-/posttests to measure perceived gains in knowledge. Participants generally were satisfied with the training experience and gained new partnership knowledge and skills. Although the CBO leaders were more engaged in the cooperative learning process, this training format appealed to both audiences. Pilot testing demonstrated that: 1) our modules can equip researchers and CBO leaders with new partnership knowledge and skills and 2) the cooperative learning format is a well-received and suitable option for mental health research partnership training.

  5. Influence of Slip and Lubrication Regime on the Formation of White Etching Cracks on a Two-Disc Test Rig

    OpenAIRE

    Francisco Gutiérrez Guzmán; Mehmet Ozan Oezel; Georg Jacobs; Gero Burghardt; Christoph Broeckmann; Thomas Janitzky

    2018-01-01

    A common cause for maintenance and downtime in multiple fields of the mechanical transmission industries are premature rolling bearing failures due to white etching cracks (WEC). Within this work, WEC have been successfully recreated on a two-disc test rig under rolling contact loading without additional loading such as hydrogen pre-charging. This paper summarizes the state of the investigations regarding the influence of the slip type and the lubrication regime on the WEC formation on the tw...

  6. Structure formation in turbulent plasmas - test of nonlinear processes in plasma experiments

    International Nuclear Information System (INIS)

    Itoh, S.-I.; Yagi, Masatoshi; Inagaki, Shigeru

    2009-01-01

    Full text: Recent developments in plasma physics, either in the fusion research in a new era of ITER, or in space and in astro-physics, the world-wide and focused research has been developed on the subject of structural formation in turbulent plasma being associated with electro-magnetic field formation. Keys for the progress were a change of the physics view from the 'linear, local and deterministic' picture to the description based on 'nonlinear instability, nonlocal interaction and probabilistic excitation' for the turbulent state, and the integration of the theory-simulation-experiment. In this presentation, we first briefly summarize the theory of microscopic turbulence and mesoscale fluctuations and selection rules. In addition, the statistical formation of large-scale structure/deformation by turbulence is addressed. Then, the experimental measurements of the mesoscale structures (e.g., zonal flows, zonal fields, streamer and transport interface) and of the nonlinear interactions among them in turbulent plasmas are reported. Confirmations by, and new challenges from, the experiments are overviewed. Work supported by the Grant-in-Aid for Specially-Promoted Research (16002005). (author)

  7. Estimation of the strength of Nubian sandstone formation from point load test index and other simple parameters

    Directory of Open Access Journals (Sweden)

    Zein Abdul Karim M.

    2018-01-01

    Full Text Available This study investigates the correlation of the uniaxial compressive strength (UCS and the point load test (PLT index Is(50, bulk density, water absorption and the RQD properties of the Sudanese Nubian sandstone formation. The UCS being is the rock property needed in engineering practice but its determination is tedious, time consuming and expensive. Alternatively, the UCS may be indirectly evaluated through establishing relationships with rock parameters which are easier, cheaper and more convenient to determine in the laboratory or in the field. An extensive laboratory testing was executed to determine the above rock properties for many NSF samples taken from Khartoum State and other areas. Statistical analysis was performed on the test data and a reliable linear regression equation has been developed with a UCS to PLT Is(50 conversion factor of 10.18 and may be applied to estimate the strength of the Sudanese sandstone formation. The developed correlation is in good agreement with few of the many methods published for similar rock types which indicates that large errors may result in from applying an inappropriate UCS prediction method. Thus, it is important to establish separate correlations or validate published correlations to check their suitability for a specific rock types and local geologies. Useful correlation relationships of reasonable accuracy were also established for rough estimation of the UCS from the bulk density, water absorption and the RQD properties of the Nubian sandstone formation.

  8. Influence of Slip and Lubrication Regime on the Formation of White Etching Cracks on a Two-Disc Test Rig

    Directory of Open Access Journals (Sweden)

    Francisco Gutiérrez Guzmán

    2018-01-01

    Full Text Available A common cause for maintenance and downtime in multiple fields of the mechanical transmission industries are premature rolling bearing failures due to white etching cracks (WEC. Within this work, WEC have been successfully recreated on a two-disc test rig under rolling contact loading without additional loading such as hydrogen pre-charging. This paper summarizes the state of the investigations regarding the influence of the slip type and the lubrication regime on the WEC formation on the two-disc test rig.

  9. Correlation of wireline log characteristics with hydrothermal alteration and other reservoir properties of the Salton Sea and Westmorland geothermal fields, Imperial Valley, California, USA

    Energy Technology Data Exchange (ETDEWEB)

    Muramoto, F.S.; Elders, W.A.

    1984-05-01

    A detailed study of wireline logs from 11 wells in the Salton Sea and Westmorland geothermal systems was undertaken in order to determine the effects of hydrothermal alteration on the response of electrical and gamma-gamma density well logs. For the Salton Sea geothermal field, definite correspondence between log responses and hydrothermal mineralogy is evident, which in turn is related to the physical properties of the rocks. Three hydrothermal and one unaltered zone can be identified from log data on shales. These are: (1) the unaltered montmorillonite zone (<100/sup 0/ to 190/sup 0/C); (2) the illite zone (100/sup 0/ to 190/sup 0/C to 230/sup 0/ to 250/sup 0/C); (3) the chlorite zone (230/sup 0/ to 250/sup 0/C to 290/sup 0/ to 300/sup 0/C); and (4) the feldspar zone (>290/sup 0/ to 300/sup 0/C). The characteristic responses on well logs by which these zones are identified result primarily from changes in clay mineralogy of the shales and increases in density with progressive hydrothermal metamorphism. In the Westmorland geothermal field, differentiating mineral zones from log responses was only partially successful. However, analyses of both well log and petrologic data for wells Landers 1 and Kalin Farms 1 suggest that the former is heating up and the latter is cooling.

  10. Lithostratigraphic and sequence stratigraphic architecture of the Winduck Interval, central Darling Basin, Australia, based on integration of wireline logs, cores and cuttings data

    Science.gov (United States)

    Khalifa, M. KH.; Jones, B. G.; Mahmud, W. M.

    2016-06-01

    An integration of lithostratigraphy and general sedimentary facies character for non-marine rocks can be a powerful tool in understanding the sequence stratigraphic architecture of the subsurface latest Silurian to Early Devonian Winduck Interval in the Blantyre and western Neckarboo sub-basins, central Darling Basin. This study integrates wireline logs (gamma ray and resistivity), cores and cuttings data to determine the sequence stratigraphic subdivision of the study area. The lithostratigraphy of the Winduck Interval could be subdivided into three units (A, B and C, in ascending order) in the four available wells (Mount Emu 1, Kewell East 1, Booligal Creek 1 and Booligal Creek 2). Closer study of the sequence stratigraphy in the approximately 850-m-thick Winduck Interval revealed ten parasequences (A-J) in progradational to retrogradational parasequence sets and three main Winduck sequences, WKS1, WKS2 and WKS3. Use of the suggested sequence stratigraphic model of the Winduck Interval has the potential to refine existing lithostratigraphic schemes and, given the higher resolution and more detailed correlation, may significantly improve subsurface stratigraphic reconstructions and aid in prediction of hydrocarbon-bearing reservoirs.

  11. The relation of HIV testing and treatment to identity formation in ...

    African Journals Online (AJOL)

    Why would many Zambians be reluctant to access lifesaving antiretroviral treatment? Does the process of accessing an HIV test in Zambia promote an identity that can change individuals' livelihood strategies? What happens to individuals when people access treatment? Voluntary testing and treatment centres and the ...

  12. Testing Star Formation Laws in a Starburst Galaxy At Redshift 3 Resolved with ALMA

    Science.gov (United States)

    Sharda, P.; Federrath, C.; da Cunha, E.; Swinbank, A. M.; Dye, S.

    2018-04-01

    Using high-resolution (sub-kiloparsec scale) data obtained by ALMA, we analyze the star formation rate (SFR), gas content and kinematics in SDP 81, a gravitationally-lensed starburst galaxy at redshift 3. We estimate the SFR surface density (ΣSFR) in the brightest clump of this galaxy to be 357^{+135}_{-85} {M_{⊙}} yr^{-1} kpc^{-2}, over an area of 0.07 ± 0.02 kpc2. Using the intensity-weighted velocity of CO (5-4), we measure the turbulent velocity dispersion in the plane-of-the-sky and find σv, turb = 37 ± 5 km s-1 for the clump, in good agreement with previous estimates along the line of sight, corrected for beam smearing. Our measurements of gas surface density, freefall time and turbulent Mach number allow us to compare the theoretical SFR from various star formation models with that observed, revealing that the role of turbulence is crucial to explaining the observed SFR in this clump. While the Kennicutt Schmidt (KS) relation predicts an SFR surface density of Σ _{SFR,KS} = 52± 17 {M_{⊙}} yr^{-1} kpc^{-2}, the single-freefall model by Krumholz, Dekel and McKee (KDM) predicts Σ _{SFR,KDM} = 106± 37 {M_{⊙ }} yr^{-1} kpc^{-2}. In contrast, the multi-freefall (turbulence) model by Salim, Federrath and Kewley (SFK) gives Σ _{SFR,SFK} = 491^{+139 }_{-194} {M_{⊙ }} yr^{-1} kpc^{-2}. Although the SFK relation overestimates the SFR in this clump (possibly due to the negligence of magnetic fields), it provides the best prediction among the available models. Finally, we compare the star formation and gas properties of this galaxy to local star-forming regions and find that the SFK relation provides the best estimates of SFR in both local and high-redshift galaxies.

  13. Protostellar formation in rotating interstellar clouds. I. Numerical methods and tests

    International Nuclear Information System (INIS)

    Boss, A.P.

    1980-01-01

    The details of how dense interstellar clouds collapse to form protostars are obscured from observation by the very clouds in which the condensation takes place, leaving an observational gap between the clouds and pre--main-sequence (PMS) stars. There is also a gap of roughly four orders of magnitude between the specific spin angular momentum of such clouds and that of PMS stars. Thus in order to fully understand the sequence of events in stellar formation, we must construct theoretical models of the collapse and fragmentation of rotating interstellar clouds into single or multiple protostellar systems

  14. Testing the Formation Mechanism of Sub-Stellar Objects in Lupus (A SOLA Team Study)

    Science.gov (United States)

    De Gregorio-Monsalvo, Itziar; Lopez, C.; Takahashi, S.; Santamaria-Miranda

    2017-06-01

    The international SOLA team (Soul of Lupus with ALMA) has identified a set of pre- and proto-stellar candidates in Lupus 1 and 3 of substellar nature using 1.1mm ASTE/AzTEC maps and our optical to submillimeter database. We have observed with ALMA the most promising pre- and proto-brown dwarfs candidates. Our aims are to provide insights on how substellar objects form and evolve, from the equivalent to the pre-stellar cores to the Class II stage in the low mass regime of star formation. Our sample comprises 33 pre-stellar objects, 7 Class 0 and I objects, and 22 Class II objects.

  15. Surface modification of nano-silica on the ligament advanced reinforcement system for accelerated bone formation: primary human osteoblasts testing in vitro and animal testing in vivo.

    Science.gov (United States)

    Li, Mengmeng; Wang, Shiwen; Jiang, Jia; Sun, Jiashu; Li, Yuzhuo; Huang, Deyong; Long, Yun-Ze; Zheng, Wenfu; Chen, Shiyi; Jiang, Xingyu

    2015-05-07

    The Ligament Advanced Reinforcement System (LARS) has been considered as a promising graft for ligament reconstruction. To improve its biocompatibility and effectiveness on new bone formation, we modified the surface of a polyethylene terephthalate (PET) ligament with nanoscale silica using atom transfer radical polymerization (ATRP) and silica polymerization. The modified ligament is tested by both in vitro and in vivo experiments. Human osteoblast testing in vitro exhibits an ∼21% higher value in cell viability for silica-modified grafts compared with original grafts. Animal testing in vivo shows that there is new formed bone in the case of a nanoscale silica-coated ligament. These results demonstrate that our approach for nanoscale silica surface modification on LARS could be potentially applied for ligament reconstruction.

  16. Correlation of engineering parameters of the presumpscot formation to the seismic cone penetration test (SCPTU).

    Science.gov (United States)

    2015-08-01

    The seismic cone penetration test with pore pressure measurement (SCPTu) is a geotechnical investigation technique which : involves pushing a sensitized cone into the subsurface at a constant rate while continuously measuring tip resistance, sleeve :...

  17. Anticoagulant Carryover May Influence Clot Formation in Direct Tube Coagulase Tests from Blood Cultures

    OpenAIRE

    Varettas, Kerry; Mukerjee, Chinmoy; Taylor, Peter C.

    2005-01-01

    The tube coagulase test (TCT) performed directly from positive blood culture bottles has been used to reduce the turnaround time for identifying Staphylococcus aureus. Most reports have shown the test to be specific but often lacking sufficient sensitivity to be useful. In a prospective study of blood culture bottles (BCB) signaling positive, with a Gram-stained smear showing gram-positive cocci resembling staphylococci, the sensitivity of the direct TCT was improved by diluting the BCB broth...

  18. Gulf Coast Programmatic Environmental Assessment Geothermal Well Testing: The Frio Formation of Texas and Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-10-01

    In accordance with the requirements of 10 CFR Part 711, environmental assessments are being prepared for significant activities and individual projects of the Division of Geothermal Energy (DGE) of the Energy Research and Development Administration (ERDA). This environmental assessment of geopressure well testing addresses, on a regional basis, the expected activities, affected environments, and possible impacts in a broad sense. The specific part of the program addressed by this environmental assessment is geothermal well testing by the take-over of one or more unsuccessful oil wells before the drilling rig is removed and completion of drilling into the geopressured zone. Along the Texas and Louisiana Gulf Coast (Plate 1 and Overlay) water at high temperatures and high pressures is trapped within Gulf basin sediments. The water is confined within or below essentially impermeable shale sequences and carries most or all of the overburden pressure. Such zones are referred to as geopressured strata. These fluids and sediments are heated to abnormally high temperatures (up to 260 C) and may provide potential reservoirs for economical production of geothermal energy. The obvious need in resource development is to assess the resource. Ongoing studies to define large-sand-volume reservoirs will ultimately define optimum sites for drilling special large diameter wells to perform large volume flow production tests. In the interim, existing well tests need to be made to help define and assess the resource. The project addressed by this environmental assessment is the performance of a geothermal well test in high potential geothermal areas. Well tests involve four major actions each of which may or may not be required for each of the well tests. The four major actions are: site preparation, drilling a salt-water disposal well, actual flow testing, and abandonment of the well.

  19. Testing Timescales for Rhythms Recorded in the 2.5 Ga Banded Iron Formation of the Dales Gorge Member (Brockman Iron Formation, Hamersley Group, Australia)

    Science.gov (United States)

    Hinnov, L. A.; de Oliveira Carvalho Rodrigues, P.; Franco, D.

    2017-12-01

    The classic, Superior-type banded iron formation (BIF) of the Precambrian Dales Gorge Member (DGM) of the Brockman Iron Formation, Hamersley Basin, Western Australia consists of a succession of micro- (millimeter-scale) and meso- (centimeter to decimeter-scale) bands of primarily iron-silica chemical sediment alternations, separated into macro- (meter to decameter-scale) bands by shales (1). Here, we present a time-frequency analysis of a gray-scale scan of the DGM "type section core" Hole 47A with small contributions from Hole EC10 (1) to provide a comprehensive characterization of banding patterns and periodicity throughout the 140 m section. SHRIMP zircon ages (2) indicate that the DGM was deposited over approximately 30 myr during the Archean-Proterozoic transition just prior to the Great Oxidation Event. This suggests that the banding patterns recorded Milankovitch cycles, although with orbital-rotational parameters significantly different from present-day due to Earth's tidal dissipation and chaotic episodes in the Solar System since 2.5 Ga. Banding patterns change systematically within the formation in response to slowly varying environmental conditions, which have been interpreted previously to be related to sea level change and basin evolution (3). Researchers, including (2), have questioned the 30 myr duration, suggesting instead that the micro-bands may be annual in scale. This would indicate a much shorter duration of less than 150 kyr for the DGM. In an attempt to determine whether Milankovitch cycles could have generated the meso-band patterns, we present detailed studies of BIF0 and BIF12, which typify the marked changes in meso-banding along the section. Objective procedures are also applied, including ASM (4) and TIMEOPT (5) to test for a range of potential alternative timescales assuming orbital-rotational parameter values modeled for 2.5 Ga. References: (1) Trendall, A.K., Blockley, J.G., GSWA Ann. Rep. 1967, 48, 1968; (2) Trendall, A.K., et al

  20. The Red MSX Source survey: critical tests of accretion models for the formation of massive stars

    Science.gov (United States)

    Davies, Ben; Hoare, Melvin G.; Lumsden, Stuart L.; Hosokawa, Takashi; Oudmaijer, René D.; Urquhart, James S.; Mottram, Joseph C.; Stead, Joseph

    2011-09-01

    There is currently no accepted theoretical framework for the formation of the most massive stars, and the manner in which protostars continue to accrete and grow in mass beyond ˜10 M⊙ is still a controversial topic. In this study we use several prescriptions of stellar accretion and a description of the Galactic gas distribution to simulate the luminosities and spatial distribution of massive protostellar population of the Galaxy. We then compare the observables of each simulation to the results of the Red MSX Source (RMS) survey, a recently compiled data base of massive young stellar objects (YSO). We find that the observations are best matched by accretion rates which increase as the protostar grows in mass, such as those predicted by the turbulent core and competitive accretion (i.e. Bondi-Hoyle) models. These 'accelerating accretion' models provide very good qualitative and quantitative fits to the data, though we are unable to distinguish between these two models on our simulations alone. We rule out models with accretion rates which are constant with time, and those which are initially very high and which fall away with time, as these produce results which are quantitatively and/or qualitatively incompatible with the observations. To simultaneously match the low- and high-luminosity YSO distribution we require the inclusion of a 'swollen-star' pre-main-sequence phase, the length of which is well-described by the Kelvin-Helmholz time-scale. Our results suggest that the lifetime of the YSO phase is ˜105 yr, whereas the compact H II region phase lasts between ˜2 and 4 × 105 yr depending on the final mass of the star. Finally, the absolute numbers of YSOs are best matched by a globally averaged star formation rate for the Galaxy of 1.5-2 M⊙.

  1. Design study for a macropermeability test in an argillaceous formation (Boom clay)

    International Nuclear Information System (INIS)

    Bronders, J.

    1992-01-01

    In the present report a test design has been developed for determining the in-situ permeability of the Boom clay on a large scale at the Mol site (Belgium). Since in the Boom clay at the Mol site an Underground Repository Facility (URF) is operational the test has been designed to be run in or from this facility. The proposal is an in-situ macropermeability test with a set-up comprising a central borehole (metric scale in length) designed to allow various types of control of the water-level, surrounded by a lattice of piezometers installed in the clay mass for the monitoring of the interstitial water pressure changes in function of the various water-level controls. In one part the report describes the potential set-ups and a theoretical background as far as it can be done on the basis of existing literature and experiments. In a second part the method (technical and practical data of a test set-up) is described and documented. The method proposed is largely based on the several years of expertise gained within the field of in-situ migration and hydrogeologic investigations in the Hades-URF. 14 refs., 9 figs., 2 tabs

  2. Formation evaluation and well-test analysis for complex interpretation of reservoir permeability distribution

    Science.gov (United States)

    Korovin, M. O.; Merkulov, V. P.

    2014-08-01

    Data on heterogeneity of porous space and reservoir filtration properties determines the choice of most effective development strategy. The comparative analysis of well-logging and well-test results was carried out to determine the value of filtration heterogeneity. The similarity of the results obtained using different methods makes it possible to predict orientation of enhanced permeability.

  3. Selected Data for Wells and Test Holes Used in Structure-Contour Maps of the Inyan Kara Group, Minnekahta Limestone, Minnelusa Formation, Madison Limestone, and Deadwood Formation in the Black Hills Area, South Dakota

    National Research Council Canada - National Science Library

    Carter, Janet M

    1999-01-01

    This report presents selected data on wells and test holes that were used in the construction of structure-contour maps of selected formations that contain major aquifers in the Black Hills area of western South Dakota...

  4. Hydrate prevention during formation test of gas in deep water; Prevencao de formacao de hidratos durante teste de formacao de poco de gas em lamina d'agua profunda

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Renato Cunha [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This work shows a scenery of formation test in deep water, for a well of gas, for which, there were made simulations with objective of identifying possible pairs of points (Pressure x Temperature), favorable to the hydrates formation. Besides, they were made comparisons of the values obtained in the simulation with the values registered during the formation test for the well Alfa of the field Beta. Of ownership of those information, we made an evaluation of the real needs of injection of inhibitors with intention of preventing the hydrates formation in each phase of the test. In an including way, the work has as objective recommends the volumes of hydrates inhibitors to be injected in each phase of a test of formation of well of gas in deep water, in way to assure that the operations are made without there is risk of hydrates formation. (author)

  5. Hydrates prevention during deep-water formation gas well test; Prevencao de formacao de hidratos durante teste de formacao de poco de gas em lamina d'agua profunda

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Renato Cunha [Unidade de Operacoes de Exploracao e Producao do Espirito Santo. Engenharia de Producao. Gerencia de Engenharia de Poco, ES (Brazil)], e-mail: renatocr@petrobras.com.br; Freitas, Alexandre Mussumeci Valim de [Centro de Pesquisas da Petrobras (CENPES). Gerencia de Tecnologia de Elevacao e Escoamento da Producao (Brazil)], e-mail: amfreitas@petrobras.com.br; Nishimura, Nelson Satiro [E and P Engenharia de Producao. Reservas e Reservatorios. Gerencia de Avaliacao de Reservatorios (Brazil)], e-mail: nishimura@petrobras.com.br

    2010-06-15

    This study examines the situation of a deep water formation test for a gas well in which simulations were made to identify possible pairs of points (Pressure versus Temperature), favorable to hydrate formation. Furthermore, the values obtained in the simulation were compared with the values registered during the formation test for the Alfa well in the Beta Field. With this information, an evaluation was made of the necessity to inject inhibitors intended to prevent hydrate formation in each test phase. In a wider sense, the study's objective was to recommend the volumes of hydrate inhibitors to be injected in each phase of a deep water formation test of a gas well to assure the operation be done without the risk of hydrate formation. (author)

  6. Influences of Item Content and Format on the Dimensionality of Tests Combining Multiple-Choice and Open-Response Items: An Application of the Poly-DIMTEST Procedure.

    Science.gov (United States)

    Perkhounkova, Yelena; Dunbar, Stephen B.

    The DIMTEST statistical procedure was used in a confirmatory manner to explore the dimensionality structures of three kinds of achievement tests: multiple-choice tests, constructed-response tests, and tests combining both formats. The DIMTEST procedure is based on estimating conditional covariances of the responses to the item pairs. The analysis…

  7. Evaluation of Cavity Collapse and Surface Crater Formation for Selected Lawrence Livermore National Laboratory Underground Nuclear Tests - 2010

    Energy Technology Data Exchange (ETDEWEB)

    Pawloski, G A

    2011-01-03

    This report evaluates collapse evolution for selected Lawrence Livermore National Laboratory (LLNL) underground nuclear tests at the Nevada National Security Site (NNSS, formerly called the Nevada Test Site). The work is being done at the request of Navarro-Interra LLC, and supports environmental restoration efforts by the Department of Energy, National Nuclear Security Administration for the Nevada Site Office. Safety decisions must be made before a surface crater area, or potential surface crater area, can be reentered for any work. Our statements on cavity collapse and surface crater formation are input into their safety decisions. These statements do not include the effects of erosion that may modify the surface collapse craters over time. They also do not address possible radiation dangers that may be present. Subject matter experts from the LLNL Containment Program who had been active in weapons testing activities performed these evaluations. Information used included drilling and hole construction, emplacement and stemming, timing and sequence of the selected test and nearby tests, geology, yield, depth of burial, collapse times, surface crater sizes, cavity and crater volume estimations, and ground motion. Both classified and unclassified data were reviewed. Various amounts of information are available for these tests, depending on their age and other associated activities. Lack of data can hamper evaluations and introduce uncertainty. We make no attempt to quantify this uncertainty.

  8. THE ANTIGEN-SPECIFIC CELL IN VITRO TESTS FOR POST-VACCINATION ANTIPLAGUE IMMUNITY FORMATION

    Directory of Open Access Journals (Sweden)

    A. N. Kulichenko

    2017-01-01

    Full Text Available The possibility of post-vaccination anti-plague immunity evaluation was researched using antigen-stimulated cells tests in vitro and cytometry analysis. The object of study — the blood samples of 17 people immunised by the live plague vaccine (Yersinia pestis EV epicutaneously. Blood taking was carried out before vaccination and after immunisation on 7 and on 21 days, in 3 and in 6 months. Intensity antigen reactivity of lymphocytes was detected by cell tests in vitro, analysing markers of early (CD45+CD3+CD25+ and late (CD45+CD3+HLA-DR+ lymphocyte activation using flow cytometry. The complex of water-soluble Y. pestis antigens and allergen — pestin PP was tested as antigen. The high stimulating potential was defined of the water-soluble antigens Y. pestis complex. It is shown that coefficient of stimulation of relative level T- lymphocytes which express receptors for IL-2 was positive for all observation times after immunisation. The coefficient of stimulation had maximum values at 21 days (56.37% and at 3 (47.41% months. In identifying HLADR-positive lymphocytes before vaccination, the negative coefficient of stimulation was indicated on 7 and 21 days and the positive coefficient of stimulation was indicated at 3 and at 6 months. Analysis of intensity expression of early and late lymphocyte activation markers dynamics showed the possibility and prospect of application of cellular in vitro tests for the laboratory evaluation of specific reactivity of cellular immunity in both the early (7 days and late (6 months periods after vaccination. The results can be the basis for developing a new algorithm for assessment of immunological effectiveness of vaccination people against plague. It is the algorithm based on the identification of lymphocyte activation markers by antigen stimulation in conditions in vitro.

  9. Seismic - Wireline logs sequence stratigraphic analyses and geologic evolution for the Upper Cretaceous succession of Abu Gharadig basin, Egypt

    Science.gov (United States)

    Sarhan, Mohammad Abdelfattah

    2017-05-01

    The Upper Cretaceous megasequence in the northern part of the Egyptian Western Desert has been classified into four 2nd order depositional sequences. These sequences started with the Cenomanian SQ-I topped by the Turonian - Santonian SQ-II. However, both SQ-III and SQ-IV represent the Campanian- Maastrichtian time span. The interpreted 2nd order SQ-I and SQ-II have been further subdivided into six smaller 3rd order sequences (SQ-1 to SQ-6). The depositional history started during the Early Cenomanian times, characterized by wide marine invasion enabled the deposition of the shallow marine Bahariya Formation (SQ-1). The Upper Cenomanian times, witnessed a rapid subsidence, simultaneously with new marine transgressive phase. This is resulted in the deposition of SQ-2, consuming the entire sediments of the Abu Roash G Member. During the Turonian - Coniacian times the northern parts of Egypt showed successive oscillating transgressive - regressive marine cycles led to equivocal sedimentary bodies of the Turonian-Coniacian Abu Roash Formation (SQ-3, SQ-4, and SQ-5). During the Santonian age, the northern parts of Egypt were subjected to tectonic crustal shortening, producing large scale folds. As a result, a new tectonically-overprinted marine depositional cycle started and marked by rapid phase of basin subsidence. This was accompanied by a deep marine invasion covered most of the northern parts of Egyptian lands, depositing the lower parts of the Khoman- B (SQ-6) under transgressive depositional conditions. By the end of Santonian cycle, the upper parts of the Khoman Formation B Member was deposited during a gradual, and slow relative sea level drop ending the deposition of SQ-6. At the beginning of the Campanian - Maastrichtian times, a new widespread sea-level rise associated with basin subsidence. Accordingly, two successive depositional cycles were thus initiated, forming SQ-III and SQ-VI sequences separated by unconformity type-2 boundary (SB-8).

  10. Evaluation of Cavity Collapse and Surface Crater Formation for Selected Lawrence Livermore National Laboratory Underground Nuclear Tests - 2011, Part 2

    Energy Technology Data Exchange (ETDEWEB)

    Pawloski, G A

    2012-01-30

    This report evaluates collapse evolution for selected Lawrence Livermore National Laboratory (LLNL) underground nuclear tests at the Nevada National Security Site (NNSS, formerly called the Nevada Test Site). The work is being done to support several different programs that desire access to the ground surface above expended underground nuclear tests. The programs include: the Borehole Management Program, the Environmental Restoration Program, and the National Center for Nuclear Security Gas-Migration Experiment. Safety decisions must be made before a crater area, or potential crater area, can be reentered for any work. Evaluation of cavity collapse and crater formation is input into the safety decisions. Subject matter experts from the LLNL Containment Program who participated in weapons testing activities perform these evaluations. Information used included drilling and hole construction, emplacement and stemming, timing and sequence of the selected test and nearby tests, geology, yield, depth of burial, collapse times, surface crater sizes, cavity and crater volume estimations, ground motion, and radiological release information. Both classified and unclassified data were reviewed. The evaluations do not include the effects of erosion that may modify the collapse craters over time. They also do not address possible radiation dangers that may be present. Various amounts of information are available for these tests, depending on their age and other associated activities. Lack of data can hamper evaluations and introduce uncertainty. We make no attempt to quantify this uncertainty. Evaluation of Cavity Collapse and Surface Crater Formation for Selected Lawrence Livermore National Laboratory Underground Nuclear Tests - 2011 was published on March 2, 2011. This report, considered Part 2 of work undertaken in calendar year 2011, compiles evaluations requested after the March report. The following unclassified summary statements describe collapse evolution and crater

  11. Effect of Local Crystallographic Texture on the Fissure Formation During Charpy Impact Testing of Low-Carbon Steel

    Science.gov (United States)

    Ghosh, Abhijit; Patra, Sudipta; Chatterjee, Arya; Chakrabarti, Debalay

    2016-06-01

    The severity of the formation of fissures (also known as splitting or delamination) on the fracture surface of Charpy impact-tested samples of a low-carbon steel has been found to increase with the decrease in finish rolling temperature [1093 K to 923 K (820 °C to 650 °C)]. Combined scanning electron microscopy and electron back-scattered diffraction study revealed that crystallographic texture was the prime factor responsible for the fissure formation. Through-thickness texture band composed of cube [Normal Direction (ND)║] and gamma [ND║] orientations developed during the inter-critical rolling treatment. Strain incompatibility between these two texture bands causes fissure cracking on the main fracture plane. A new approach based on the angle between {001} planes of neighboring crystals has been employed in order to estimate the `effective grain size,' which is used to determine the cleavage fracture stress on different planes of a sample. The severity of fissure formation was found to be directly related to the difference in cleavage fracture stress between the `main fracture plane' and `fissure plane.' Clustering of ferrite grains having cube texture promoted the fissure crack propagation along the transverse `fissure plane,' by increasing the `effective grain size' and decreasing the cleavage fracture stress on that plane.

  12. Formation of 2-nitrophenol from salicylaldehyde as a suitable test for low peroxynitrite fluxes.

    Science.gov (United States)

    Mikhed, Yuliya; Bruns, Kai; Schildknecht, Stefan; Jörg, Michael; Dib, Mobin; Oelze, Matthias; Lackner, Karl J; Münzel, Thomas; Ullrich, Volker; Daiber, Andreas

    2016-04-01

    There has been some dispute regarding reaction products formed at physiological peroxynitrite fluxes in the nanomolar range with phenolic molecules, when used to predict the behavior of protein-bound aromatic amino acids like tyrosine. Previous data showed that at nanomolar fluxes of peroxynitrite, nitration of these phenolic compounds was outcompeted by dimerization (e.g. biphenols or dityrosine). Using 3-morpholino sydnonimine (Sin-1), we created low fluxes of peroxynitrite in our reaction set-up to demonstrate that salicylaldehyde displays unique features in the detection of physiological fluxes of peroxynitrite, yielding detectable nitration but only minor dimerization products. By means of HPLC analysis and detection at 380nm we could identify the expected nitration products 3- and 5-nitrosalicylaldehyde, but also novel nitrated products. Using mass spectrometry, we also identified 2-nitrophenol and a not fully characterized nitrated dimerization product. The formation of 2-nitrophenol could proceed either by primary generation of a phenoxy radical, followed by addition of the NO2-radical to the various resonance structures, or by addition of the peroxynitrite anion to the polarized carbonyl group with subsequent fragmentation of the adduct (as seen with carbon dioxide). Interestingly, we observed almost no 3- and 5-nitrosalicylic acid products and only minor dimerization reaction. Our results disagree with the previous general assumption that nitration of low molecular weight phenolic compounds is always outcompeted by dimerization at nanomolar peroxynitrite fluxes and highlight unique features of salicylaldehyde as a probe for physiological concentrations of peroxynitrite. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  13. Modified method for estimating petroleum source-rock potential using wireline logs, with application to the Kingak Shale, Alaska North Slope

    Science.gov (United States)

    Rouse, William A.; Houseknecht, David W.

    2016-02-11

    In 2012, the U.S. Geological Survey completed an assessment of undiscovered, technically recoverable oil and gas resources in three source rocks of the Alaska North Slope, including the lower part of the Jurassic to Lower Cretaceous Kingak Shale. In order to identify organic shale potential in the absence of a robust geochemical dataset from the lower Kingak Shale, we introduce two quantitative parameters, $\\Delta DT_\\bar{x}$ and $\\Delta DT_z$, estimated from wireline logs from exploration wells and based in part on the commonly used delta-log resistivity ($\\Delta \\text{ }log\\text{ }R$) technique. Calculation of $\\Delta DT_\\bar{x}$ and $\\Delta DT_z$ is intended to produce objective parameters that may be proportional to the quality and volume, respectively, of potential source rocks penetrated by a well and can be used as mapping parameters to convey the spatial distribution of source-rock potential. Both the $\\Delta DT_\\bar{x}$ and $\\Delta DT_z$ mapping parameters show increased source-rock potential from north to south across the North Slope, with the largest values at the toe of clinoforms in the lower Kingak Shale. Because thermal maturity is not considered in the calculation of $\\Delta DT_\\bar{x}$ or $\\Delta DT_z$, total organic carbon values for individual wells cannot be calculated on the basis of $\\Delta DT_\\bar{x}$ or $\\Delta DT_z$ alone. Therefore, the $\\Delta DT_\\bar{x}$ and $\\Delta DT_z$ mapping parameters should be viewed as first-step reconnaissance tools for identifying source-rock potential.

  14. The impact of formative testing on study behaviour and study performance of (bio)medical students: a smartphone application intervention study.

    Science.gov (United States)

    Lameris, Anke L; Hoenderop, Joost G J; Bindels, René J M; Eijsvogels, Thijs M H

    2015-04-10

    Formative testing can increase knowledge retention but students often underuse available opportunities. Applying modern technology to make the formative tests more attractive for students could enhance the implementation of formative testing as a learning tool. This study aimed to determine whether formative testing using an internet-based application ("app") can positively affect study behaviour as well as study performance of (bio)medical students. A formative testing app "Physiomics, to the next level" was introduced during a 4-week course to a large cohort (n = 461) of Dutch first year (bio)medical students of the Radboud University. The app invited students to complete 7 formative tests throughout the course. Each module was available for 3-4 days to stimulate the students to distribute their study activities throughout the 4-week course. 72% of the students used the app during the course. Study time significantly increased in intensive users (p Students with an average grade students; students scored the app with a grade of 7.3 ± 1.0 out of 10 and 59% of the students indicated that they would like the app to be implemented in future courses. A smartphone-based application of formative testing is an effective and attractive intervention to stimulate study behaviour and improve study performance in (bio) medical students.

  15. Large-scale numerical simulations of star formation put to the test

    DEFF Research Database (Denmark)

    Frimann, Søren; Jørgensen, Jes Kristian; Haugbølle, Troels

    2016-01-01

    (SEDs), calculated from large-scalenumerical simulations, to observational studies, thereby aiding in boththe interpretation of the observations and in testing the fidelity ofthe simulations. Methods: The adaptive mesh refinement code,RAMSES, is used to simulate the evolution of a 5 pc × 5 pc ×5 pc...... to calculate evolutionary tracers Tbol andLsmm/Lbol. It is shown that, while the observeddistributions of the tracers are well matched by the simulation, theygenerally do a poor job of tracking the protostellar ages. Disks formearly in the simulation, with 40% of the Class 0 protostars beingencircled by one...

  16. Anticoagulant carryover may influence clot formation in direct tube coagulase tests from blood cultures.

    Science.gov (United States)

    Varettas, Kerry; Mukerjee, Chinmoy; Taylor, Peter C

    2005-09-01

    The tube coagulase test (TCT) performed directly from positive blood culture bottles has been used to reduce the turnaround time for identifying Staphylococcus aureus. Most reports have shown the test to be specific but often lacking sufficient sensitivity to be useful. In a prospective study of blood culture bottles (BCB) signaling positive, with a Gram-stained smear showing gram-positive cocci resembling staphylococci, the sensitivity of the direct TCT was improved by diluting the BCB broth 1:10 in saline before inoculating 0.1 ml into 1.0 ml of 10% pooled human plasma. It was hypothesized that the improved sensitivity might be explained by reduced carryover of the anticoagulant sodium polyanetholesulfonate (SPS) used in blood culture media. By titrating the inoculum size and the concentration of SPS in an in vitro checkerboard assay, it was shown that concentrations of SPS >0.0008% prevented plasma coagulation. The 1:10 dilution of blood culture broth reduced the amount of residual SPS carried over to the TCT to a level (0.0005%) that did not impair plasma coagulation. The direct TCT inoculated with a 1:10 saline dilution of blood culture broth achieved 100% specificity and sensitivity within 4 h of inoculation without reducing the quality or quantity of coagulum.

  17. Analysis of modular dynamic formation test results from the Mount Elbert-01 stratigraphic test well, Milne Point unit, North Slope Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, B.J. [National Energy Technology Laboratory, Morgantown, WV (United States)]|[West Virginia Univ., Morgantown, WV (United States). Dept. of Chemical Engineering; Rose, K.; Boswell, R. [National Energy Technology Laboratory, Morgantown, WV (United States); Wilder, J.W. [Akron Univ., Akron, OH (United States). Dept. of Theoretical and Applied Math; Kurihara, M. [Japan Oil Engineering Co. Ltd., Kachidoki, Chuo-ku, Tokyo (Japan); White, M.D. [Pacific Northwest National Laboratory, Richland, WA (United States). Hydrology Group; Moridis, G.J. [California Univ., Lawrence Berkeley National Laboratory, Berkeley, CA (United States). Earth Sciences Division; Wilson, S.J. [Ryder Scott Co. LP., Denver, CO (United States); Pooladi-Darvish, M. [Fekete Associates Inc., Calgary, AB (Canada); Masuda, Y. [Tokyo Univ., Tokyo (Japan). Dept. of Geosystem Engineering; Collett, T.S. [United States Geological Survey, Denver, CO (United States). Denver Federal Center; Hunter, R.B. [ASRC Energy Services, Anchorage, AK (United States); Narita, H. [National Inst. of Advanced Industrial Science and Technology, Toyohiraku, Sapporo, Hokkaido (Japan). Methane Hydrate Research Laboratory

    2008-07-01

    The National Energy Technology Laboratory (NETL) and the United States Geological Survey (USGS) are leading an international effort to compare methane hydrate reservoir simulators. The purpose of the research is to exchange information regarding gas hydrate dissociation and physical properties enabling improvements in methane hydrate reservoir modeling, to build confidence in all the leading simulators through exchange of ideas and cross-validation of simulator results on common datasets of escalating complexity, and to establish a depository of gas hydrate related experiment/production scenarios with the associated predictions of these established simulators that can be used for ongoing and future comparison purposes. In order to accomplish these objectives, a team of researchers was brought together to construct a series of problems designed to test/compare the performance of the leading gas hydrate simulators. This paper discussed a project that involved history matches of one 12-hour test that included an initial stage of pressure drawdown and response in which pressures were maintained above the level where gas hydrate dissociation would occur; a second stage with 15 min of flow and 97 min buildup that included gas hydrate dissociation and gas production; and a third stage of 116 min of flow and 266 min of buildup. The test also included temperature measurements taken by a device attached to the modular dynamics formation tester's (MDT) intake screen. The paper presented the MDT data, MDT flow test, and history matching setup and results including estimates of initial formation permeability and analyses of the various unique features exhibited by the MDT results. Five different simulators were used to conduct the history matches. Simulations utilized detailed information collected across the reservoir either obtained or determined from geophysical well logs, including thickness, porosity, hydrate saturation, intrinsic permeability, pore water salinity

  18. The Cambridge Car Memory Test: a task matched in format to the Cambridge Face Memory Test, with norms, reliability, sex differences, dissociations from face memory, and expertise effects.

    Science.gov (United States)

    Dennett, Hugh W; McKone, Elinor; Tavashmi, Raka; Hall, Ashleigh; Pidcock, Madeleine; Edwards, Mark; Duchaine, Bradley

    2012-06-01

    Many research questions require a within-class object recognition task matched for general cognitive requirements with a face recognition task. If the object task also has high internal reliability, it can improve accuracy and power in group analyses (e.g., mean inversion effects for faces vs. objects), individual-difference studies (e.g., correlations between certain perceptual abilities and face/object recognition), and case studies in neuropsychology (e.g., whether a prosopagnosic shows a face-specific or object-general deficit). Here, we present such a task. Our Cambridge Car Memory Test (CCMT) was matched in format to the established Cambridge Face Memory Test, requiring recognition of exemplars across view and lighting change. We tested 153 young adults (93 female). Results showed high reliability (Cronbach's alpha = .84) and a range of scores suitable both for normal-range individual-difference studies and, potentially, for diagnosis of impairment. The mean for males was much higher than the mean for females. We demonstrate independence between face memory and car memory (dissociation based on sex, plus a modest correlation between the two), including where participants have high relative expertise with cars. We also show that expertise with real car makes and models of the era used in the test significantly predicts CCMT performance. Surprisingly, however, regression analyses imply that there is an effect of sex per se on the CCMT that is not attributable to a stereotypical male advantage in car expertise.

  19. Repetitive sessions of formative self-testing to refresh CPR skills: a randomised non-inferiority trial.

    Science.gov (United States)

    Mpotos, Nicolas; De Wever, Bram; Cleymans, Nick; Raemaekers, Joris; Loeys, Tom; Herregods, Luc; Valcke, Martin; Monsieurs, Koenraad G

    2014-09-01

    To investigate whether repetitive sessions of formative self-testing (RFST) result in an equal cardiopulmonary resuscitation (CPR) skill level compared to repetitive sessions of formative self-testing with additional practice (RFSTAP). In a non-inferiority trial, 196 third-year medical students were randomised to an RFST or RFSTAP group. Testing and practising took place in a self-learning station equipped with a manikin connected to a computer. Each cycle of RFST consisted of a 2-min CPR test followed by feedback and feedforward. In the RFSTAP group, additional practice consisted of CPR exercises with a computer voice feedback. To be successful, a combined score consisting of ≥70% compressions with a depth of ≥50 mm and ≥70% compressions with complete release (<5 mm) and a compression rate of 100-120 min(-1) and ≥70% ventilations with a volume of 400-1000 ml had to be achieved within 6 weeks. Skill retention was measured after 6 months. The non-inferiority margin was predefined as a 10% difference in success rate. After six weeks the success rate in both groups was 96%: 99/103 (RFST) and 89/93 (RFSTAP). After 6 months, the success rate in the competent students was 26/96 (27%) for RFST and 32/86 (37%) for RFSTAP (three students dropped out in each group). The difference in the success rate between RFSTAP and RFST was 10% and 90% (CI -2 to 23%), respectively. As the upper bound exceeded 10%, non-inferiority was inconclusive. For each CPR skill separately, RFST was non-inferior for ventilation and complete release, superior for compression depth and inferior for compression rate. RFST and RFSTAP were equally effective to refresh skills within 6 weeks. After 6 months, non-inferiority was inconclusive for the combined score. Our results indicate the potential of RFST to refresh CPR skills. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  20. Question format shifts bias away from the emphasised response in tests of recognition memory.

    Science.gov (United States)

    Mill, Ravi D; O'Connor, Akira R

    2014-11-01

    The question asked to interrogate memory has potential to influence response bias at retrieval, yet has not been systematically investigated. According to framing effects in the field of eyewitness testimony, retrieval cueing effects in cognitive psychology and the acquiescence bias in questionnaire responding, the question should establish a confirmatory bias. Conversely, according to findings from the rewarded decision-making literature involving mixed incentives, the question should establish a disconfirmatory bias. Across three experiments (ns=90 [online], 29 [laboratory] and 29 [laboratory]) we demonstrate a disconfirmatory bias - "old?" decreased old responding. This bias is underpinned by a goal-driven mechanism wherein participants seek to maximise emphasised response accuracy at the expense of frequency. Moreover, we demonstrate that disconfirmatory biases can be generated without explicit reference to the goal state. We conclude that subtle aspects of the test environment influence retrieval to a greater extent than has been previously considered. Copyright © 2014 Elsevier Inc. All rights reserved.

  1. Well-logging method using well-logging tools run through a drill stem test string for determining in-situ change in formation water saturation values

    International Nuclear Information System (INIS)

    Fertl, W.H.

    1975-01-01

    A logging tool (pulsed neutron or neutron-gamma ray) whose response indicates formation water saturation value, is run through an opening extending through a portion of a drill stem test string. A sample portion of the formation fluid in the zone of interest is removed and another logging run is made. The differences between the plots of the two logging runs indicate the formation potential productivity in the zone of interest

  2. Evaluation of Cavity Collapse and Surface Crater Formation for Selected Lawrence Livermore National Laboratory Underground Nuclear Tests - 2007

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, S K; Pawloski, G A; Raschke, K

    2007-04-26

    This report describes evaluation of collapse evolution for selected LLNL underground nuclear tests at the Nevada Test Site (NTS). The work is being done at the request of NSTec and supports the Department of Energy National Nuclear Security Association Nevada Site Office Borehole Management Program (BMP). The primary objective of this program is to close (plug) weapons program legacy boreholes that are deemed no longer useful. Safety decisions must be made before a crater area, or potential crater area, can be reentered for any work. Our statements on cavity collapse and crater formation are input into their safety decisions. The BMP is an on-going program to address hundreds of boreholes at the NTS. Each year NSTec establishes a list of holes to be addressed. They request the assistance of the Lawrence Livermore National Laboratory and Los Alamos National Laboratory Containment Programs to provide information related to the evolution of collapse history and make statements on completeness of collapse as relates to surface crater stability. These statements do not include the effects of erosion that may modify the collapse craters over time. They also do not address possible radiation dangers that may be present. Subject matter experts from the LLNL Containment Program and the Chemical Sciences Division who had been active in weapons testing activities performed these evaluations. Information used included drilling and hole construction, emplacement and stemming, timing and sequence of the selected test and nearby tests, geology, yield, depth of burial, collapse times, surface crater sizes, cavity and crater volume estimations, and ground motion. Both classified and unclassified data were reviewed. Various amounts of information are available for these tests, depending on their age and other associated activities. Lack of data can hamper evaluations and introduce uncertainty. We make no attempt to quantify this uncertainty. The following unclassified summary

  3. Activity of human hippocampal formation and amygdala neurons during memory testing.

    Science.gov (United States)

    Halgren, E; Babb, T L; Crandall, P H

    1978-11-01

    Single and multiple unit recordings were made from fine wires stereotaxically implanted in the hippocampus (HC), hippocampal gyrus (HCG), and amygdala (Am) of psychomotor epileptics. During a series of memory and control tests presented on slides, 21 of 155 HCG units, 15 of 59 HC units, and 2 of 54 Am units showed what appeared to be simple phasic or tonic visual responses. Twenty-seven other units, found only in the HCG, changed firing only during slides requiring a choice ('choice units'). A given choice unit responded during choices indicated verbally or manually, and during tasks requiring recall of Recent Memory, various visual discriminations, and expressions of preference. Choice units were not affected by sensory stimulation or motor activity in contexts not requiring choice. Phasically inhibited choice units had higher firing rates and lower signal-to-noise ratios than tonically excited units. Whether an electrode recorded a choice unit was unrelated to if it recorded a response to hyperventilation, or was in an area of epileptic pathology. Recordings were also made during an interview lasting several hours and eliciting a wide range of behaviors. Five of the 131 HCG units fired in repeated extended bursts, at least 50 times background during recall of word pairs or of the patient's hospital room. The unit response did not occur during numerous control tasks possessing similar overt sensory, motor, and social concomitants, but not requiring Recent Memory.

  4. Formation of Linear Gradient of Antibiotics on Microfluidic Chips for High-throughput Antibiotic Susceptibility Testing

    Science.gov (United States)

    Kim, Seunggyu; Lee, Seokhun; Jeon, Jessie S.

    2017-11-01

    To determine the most effective antimicrobial treatments of infectious pathogen, high-throughput antibiotic susceptibility test (AST) is critically required. However, the conventional AST requires at least 16 hours to reach the minimum observable population. Therefore, we developed a microfluidic system that allows maintenance of linear antibiotic concentration and measurement of local bacterial density. Based on the Stokes-Einstein equation, the flow rate in the microchannel was optimized so that linearization was achieved within 10 minutes, taking into account the diffusion coefficient of each antibiotic in the agar gel. As a result, the minimum inhibitory concentration (MIC) of each antibiotic against P. aeruginosa could be immediately determined 6 hours after treatment of the linear antibiotic concentration. In conclusion, our system proved the efficacy of a high-throughput AST platform through MIC comparison with Clinical and Laboratory Standards Institute (CLSI) range of antibiotics. This work was supported by the Climate Change Research Hub (Grant No. N11170060) of the KAIST and by the Brain Korea 21 Plus project.

  5. Fomalhaut b as a cloud of dust: Testing aspects of planet formation theory

    Energy Technology Data Exchange (ETDEWEB)

    Kenyon, Scott J. [Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138 (United States); Currie, Thayne [Department of Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto, ON M5S 1A1 (Canada); Bromley, Benjamin C., E-mail: skenyon@cfa.harvard.edu, E-mail: currie@astro.utoronto.ca, E-mail: bromley@physics.utah.edu [Department of Physics, University of Utah, 201 JFB, Salt Lake City, UT 84112 (United States)

    2014-05-01

    We consider the ability of three models—impacts, captures, and collisional cascades—to account for a bright cloud of dust in Fomalhaut b. Our analysis is based on a novel approach to the power-law size distribution of solid particles central to each model. When impacts produce debris with (1) little material in the largest remnant and (2) a steep size distribution, the debris has enough cross-sectional area to match observations of Fomalhaut b. However, published numerical experiments of impacts between 100 km objects suggest this outcome is unlikely. If collisional processes maintain a steep size distribution over a broad range of particle sizes (300 μm to 10 km), Earth-mass planets can capture enough material over 1-100 Myr to produce a detectable cloud of dust. Otherwise, capture fails. When young planets are surrounded by massive clouds or disks of satellites, a collisional cascade is the simplest mechanism for dust production in Fomalhaut b. Several tests using Hubble Space Telescope or James Webb Space Telescope data—including measuring the expansion/elongation of Fomalhaut b, looking for trails of small particles along Fomalhaut b's orbit, and obtaining low resolution spectroscopy—can discriminate among these models.

  6. Fomalhaut b as a cloud of dust: Testing aspects of planet formation theory

    International Nuclear Information System (INIS)

    Kenyon, Scott J.; Currie, Thayne; Bromley, Benjamin C.

    2014-01-01

    We consider the ability of three models—impacts, captures, and collisional cascades—to account for a bright cloud of dust in Fomalhaut b. Our analysis is based on a novel approach to the power-law size distribution of solid particles central to each model. When impacts produce debris with (1) little material in the largest remnant and (2) a steep size distribution, the debris has enough cross-sectional area to match observations of Fomalhaut b. However, published numerical experiments of impacts between 100 km objects suggest this outcome is unlikely. If collisional processes maintain a steep size distribution over a broad range of particle sizes (300 μm to 10 km), Earth-mass planets can capture enough material over 1-100 Myr to produce a detectable cloud of dust. Otherwise, capture fails. When young planets are surrounded by massive clouds or disks of satellites, a collisional cascade is the simplest mechanism for dust production in Fomalhaut b. Several tests using Hubble Space Telescope or James Webb Space Telescope data—including measuring the expansion/elongation of Fomalhaut b, looking for trails of small particles along Fomalhaut b's orbit, and obtaining low resolution spectroscopy—can discriminate among these models.

  7. A robust method of measuring other-race and other-ethnicity effects: the Cambridge Face Memory Test format.

    Science.gov (United States)

    McKone, Elinor; Stokes, Sacha; Liu, Jia; Cohan, Sarah; Fiorentini, Chiara; Pidcock, Madeleine; Yovel, Galit; Broughton, Mary; Pelleg, Michel

    2012-01-01

    Other-race and other-ethnicity effects on face memory have remained a topic of consistent research interest over several decades, across fields including face perception, social psychology, and forensic psychology (eyewitness testimony). Here we demonstrate that the Cambridge Face Memory Test format provides a robust method for measuring these effects. Testing the Cambridge Face Memory Test original version (CFMT-original; European-ancestry faces from Boston USA) and a new Cambridge Face Memory Test Chinese (CFMT-Chinese), with European and Asian observers, we report a race-of-face by race-of-observer interaction that was highly significant despite modest sample size and despite observers who had quite high exposure to the other race. We attribute this to high statistical power arising from the very high internal reliability of the tasks. This power also allows us to demonstrate a much smaller within-race other ethnicity effect, based on differences in European physiognomy between Boston faces/observers and Australian faces/observers (using the CFMT-Australian).

  8. A robust method of measuring other-race and other-ethnicity effects: the Cambridge Face Memory Test format.

    Directory of Open Access Journals (Sweden)

    Elinor McKone

    Full Text Available Other-race and other-ethnicity effects on face memory have remained a topic of consistent research interest over several decades, across fields including face perception, social psychology, and forensic psychology (eyewitness testimony. Here we demonstrate that the Cambridge Face Memory Test format provides a robust method for measuring these effects. Testing the Cambridge Face Memory Test original version (CFMT-original; European-ancestry faces from Boston USA and a new Cambridge Face Memory Test Chinese (CFMT-Chinese, with European and Asian observers, we report a race-of-face by race-of-observer interaction that was highly significant despite modest sample size and despite observers who had quite high exposure to the other race. We attribute this to high statistical power arising from the very high internal reliability of the tasks. This power also allows us to demonstrate a much smaller within-race other ethnicity effect, based on differences in European physiognomy between Boston faces/observers and Australian faces/observers (using the CFMT-Australian.

  9. Elysium region, mars: Tests of lithospheric loading models for the formation of tectonic features

    International Nuclear Information System (INIS)

    Hall, J.L.; Solomon, S.C.; Head, J.W.

    1986-01-01

    The second largest volcanic province on Mars lies in the Elysium region. Like the larger Tharsis province, Elysium is marked by a topographic rise and a broad free air gravity anomaly and also exhibits a complex assortment of tectonic and volcanic features. We test the hypothesis that the tectonic features in the Elysium region are the product of stresses produced by loading of the Martian lithosphere. We consider loading at three different scales: local loading by individual volcanoes, regional loading of the lithosphere from above or below, and quasi-global loading by Tharsis. A comparison of flexural stresses with lithospheric strength and with the inferred maximum depth of faulting confirms that concentric graben around Elysium Mons can be explained as resulting from local flexure of an elastic lithosphere about 50 km thick in response to the volcano load. Volcanic loading on a regional scale, however, leads to predicted stresses inconsistent with all observed tectonic features, suggesting that loading by widespread emplacement of thick plains deposits was not an important factor in the tectonic evolution of the Elysium region. A number of linear extensional features oriented generally NW-SE may have been the result of flexural uplift of the lithosphere on the scale of the Elysium rise. The global stress field associated with the support of the Tharsis rise appears to have influenced the development of many of the tectonic features in the Elysium region, including Cerberus Rupes and the systems of ridges in eastern and western Elysium. The comparisons of stress models for Elysium with the preserved tectonic features support a succession of stress fields operating at different times in the region

  10. GALAXY CLUSTERING TOPOLOGY IN THE SLOAN DIGITAL SKY SURVEY MAIN GALAXY SAMPLE: A TEST FOR GALAXY FORMATION MODELS

    International Nuclear Information System (INIS)

    Choi, Yun-Young; Kim, Juhan; Kim, Sungsoo S.; Park, Changbom; Gott, J. Richard; Weinberg, David H.; Vogeley, Michael S.

    2010-01-01

    We measure the topology of the main galaxy distribution using the Seventh Data Release of the Sloan Digital Sky Survey, examining the dependence of galaxy clustering topology on galaxy properties. The observational results are used to test galaxy formation models. A volume-limited sample defined by M r -1 Mpc smoothing scale, with 4.8% uncertainty including all systematics and cosmic variance. The clustering topology over the smoothing length interval from 6 to 10 h -1 Mpc reveals a mild scale dependence for the shift (Δν) and void abundance (A V ) parameters of the genus curve. We find substantial bias in the topology of galaxy clustering with respect to the predicted topology of the matter distribution, which varies with luminosity, morphology, color, and the smoothing scale of the density field. The distribution of relatively brighter galaxies shows a greater prevalence of isolated clusters and more percolated voids. Even though early (late)-type galaxies show topology similar to that of red (blue) galaxies, the morphology dependence of topology is not identical to the color dependence. In particular, the void abundance parameter A V depends on morphology more strongly than on color. We test five galaxy assignment schemes applied to cosmological N-body simulations of a ΛCDM universe to generate mock galaxies: the halo-galaxy one-to-one correspondence model, the halo occupation distribution model, and three implementations of semi-analytic models (SAMs). None of the models reproduces all aspects of the observed clustering topology; the deviations vary from one model to another but include statistically significant discrepancies in the abundance of isolated voids or isolated clusters and the amplitude and overall shift of the genus curve. SAM predictions of the topology color dependence are usually correct in sign but incorrect in magnitude. Our topology tests indicate that, in these models, voids should be emptier and more connected and the threshold for

  11. Corrosion testing of selected packaging materials for disposal of high-level waste glass in rock-salt formations

    International Nuclear Information System (INIS)

    Smailos, E.; Schwarzkopf, W.; Koester, R.; Fiehn, B.; Halm, G.

    1991-01-01

    In previous corrosion studies performed in salt brines, unalloyed steels, Ti 99.8-Pd and Hastelloy C4 have proved to be the most promising materials for long-term resistant packagings to be used in heat-generating waste (vitrified HLW, spent fuel) disposal in rock-salt formations. Investigations of the iron-base materials Ni-Resist D2 and D4, cast iron and Si-cast iron have also been carried out in order to complete the results available to date. The three steels (fine-grained steel, low-carbon steel, cast steel) investigated and Ti 99.8-Pd resisted pitting and crevice corrosion as well as stress-corrosion cracking under all test conditions. Gamma dose-rates of 1 Gy/h - 100 Gy/h or H 2 S concentrations in the brines as well as welding and explosion plating did not influence noticeably the corrosion behaviour of the materials. Furthermore, the determined corrosion rates of the steels (50 μm/a-250 μm/a, depending on the test conditions) are intercomparable and imply technically acceptable corrosion allowances for the thick-walled containers discussed. For Ti 99.8-Pd no detectable corrosion was observed. By contrast, Hastelloy C4 proved susceptible to pitting and crevice corrosion at gamme dose-rates higher than 1 Gy/h and in the presence of H 2 S (25 mg/l) in Q-brine. The materials Ni Resist D2 and D4, cast iron and Si-cast iron corroded at negligible rates in the in-situ experiments performed in rock salt/limited amounts of NaCI-brine. Nevertheless, these materials must be ruled out as container materials because they have proved to be susceptible to pitting and intergranular corrosion in previous laboratory studies conducted with MgCI 2 -rich brine (Q-brine) in excess. 15 refs.; 29 figs.; 7 tabs

  12. Auto-consistent test of Galaxy star formation histories derived from resolved stellar population and integral spectroscopy

    Science.gov (United States)

    Rodrigues, M.; Patricio, V.; Rothberg, B.; Sanchez-Janssen, R.; Vale Asari, N.

    We present the first results of our observational project 'Starfish' (STellar Population From Integrated Spectrum). The goal of this project is to calibrate, for the first time, the properties of stellar populations derived from integrated spectra with the same properties derived from direct imaging of stellar populations in the same set of galaxies. These properties include the star-formation history (SFH), stellar mass, age, and metallicity. To date, such calibrations have been demonstrated only in star clusters, globular clusters with single stellar populations, not in complex and composite objects such as galaxies. We are currently constructing a library of integrated spectra obtained from a sample of 38 nearby dwarf galaxies obtained with GEMINI/GMOS-N&S (25h) and VLT/VIMOS-IFU (43h). These are to be compared with color magnitude diagrams (CMDs) of the same galaxies constructed from archival HST imaging sensitive to at least 1.5 magnitudes below the tip of the red giant branch. From this comparison we will assess the systematics and uncertainties from integrated spectral techniques. The spectra library will be made publicly available to the community via a dedicated web-page and Vizier database. This dataset will provide a unique benchmark for testing fitting procedures and stellar population models for both nearby and distant galaxies. http://www.sc.eso.org/˜marodrig/Starfish/

  13. The value of Retrospective and Concurrent Think Aloud in formative usability testing of a physician data query tool.

    Science.gov (United States)

    Peute, Linda W P; de Keizer, Nicolette F; Jaspers, Monique W M

    2015-06-01

    To compare the performance of the Concurrent (CTA) and Retrospective (RTA) Think Aloud method and to assess their value in a formative usability evaluation of an Intensive Care Registry-physician data query tool designed to support ICU quality improvement processes. Sixteen representative intensive care physicians participated in the usability evaluation study. Subjects were allocated to either the CTA or RTA method by a matched randomized design. Each subject performed six usability-testing tasks of varying complexity in the query tool in a real-working context. Methods were compared with regard to number and type of problems detected. Verbal protocols of CTA and RTA were analyzed in depth to assess differences in verbal output. Standardized measures were applied to assess thoroughness in usability problem detection weighted per problem severity level and method overall effectiveness in detecting usability problems with regard to the time subjects spent per method. The usability evaluation of the data query tool revealed a total of 43 unique usability problems that the intensive care physicians encountered. CTA detected unique usability problems with regard to graphics/symbols, navigation issues, error messages, and the organization of information on the query tool's screens. RTA detected unique issues concerning system match with subjects' language and applied terminology. The in-depth verbal protocol analysis of CTA provided information on intensive care physicians' query design strategies. Overall, CTA performed significantly better than RTA in detecting usability problems. CTA usability problem detection effectiveness was 0.80 vs. 0.62 (pusability problems of a moderate (0.85 vs. 0.7) and severe nature (0.71 vs. 0.57). In this study, the CTA is more effective in usability-problem detection and provided clarification of intensive care physician query design strategies to inform redesign of the query tool. However, CTA does not outperform RTA. The RTA

  14. Development of a competency-based formative progress test with student-generated MCQs: Results from a multi-centre pilot study

    Directory of Open Access Journals (Sweden)

    Wagener, Stefan

    2015-10-01

    Full Text Available Introduction: Progress tests provide students feedback on their level of proficiency over the course of their medical studies. Peer-assisted learning and competency-based education have become increasingly important in medical education. Although progress tests have been proven to be useful as a longitudinal feedback instrument, there are currently no progress tests that have been created in cooperation with students or that focus on competency in medical education.In this study, we investigated the extent to which students can be included in the development of a progress test and demonstrated that aspects of knowledge related to competency can be represented on a competency-based progress test.Methods: A two-dimensional blueprint for 144 multiple-choice questions (MCQs covering groups of medical subjects and groups of competency areas was generated by three expert groups for developing the competency-based progress test. A total of 31 students from seven medical schools in Germany actively participated in this exercise. After completing an intensive and comprehensive training programme, the students generated and reviewed the test questions for the competency-based progress test using a separate platform of the ItemManagementSystem (IMS. This test was administered as a formative test to 469 students in a pilot study in November 2013 at eight medical schools in Germany. The scores were analysed for the overall test and differentiated according to the subject groups and competency areas.Results: A pool of more than 200 MCQs was compiled by the students for pilot use, of which 118 student-generated MCQs were used in the progress test. University instructors supplemented this pool with 26 MCQs, which primarily addressed the area of scientific skills. The post-review showed that student-generated MCQs were of high quality with regard to test statistic criteria and content. Overall, the progress test displayed a very high reliability. When the

  15. Field Test and Evaluation of Engineered Biomineralization Technology for Sealing Existing Wells

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham, Alfred [Montana State Univ., Bozeman, MT (United States)

    2015-12-21

    This research project addresses one of the goals of the U.S. Department of Energy (DOE) Carbon Storage Program (CSP) aimed at developing Advanced Wellbore Integrity Technologies to Ensure Permanent Geologic Carbon Storage. The technology field-tested in this research project is referred to as microbially induced calcite precipitation (MICP), which utilizes a biologically-based process to precipitate calcium carbonate. If properly controlled MICP can successfully seal fractures, high permeability zones, and compromised wellbore cement in the vicinity of wellbores and in nearby caprock, thereby improving the storage security of geologically-stored carbon dioxide. This report describes an MICP sealing field test performed on a 24.4 cm (9.625 inch) diameter well located on the Gorgas Steam Generation facility near Jasper, Alabama. The research was aimed at (1) developing methods for delivering MICP promoting fluids downhole using conventional oil field technologies and (2) assessing the ability of MICP to seal cement and formation fractures in the near wellbore region in a sandstone formation. Both objectives were accomplished successfully during a field test performed during the period April 1-11, 2014. The test resulted in complete biomineralization sealing of a horizontal fracture located 340.7 m (1118 feet) below ground surface. A total of 24 calcium injections and six microbial inoculation injections were required over a three day period in order to achieve complete sealing. The fractured region was considered completely sealed when it was no longer possible to inject fluids into the formation without exceeding the initial formation fracture pressure. The test was accomplished using conventional oil field technology including an 11.4 L (3.0 gallon) wireline dump bailer for injecting the biomineralization materials downhole. Metrics indicating successful MICP sealing included reduced injectivity during seal formation, reduction in pressure falloff, and

  16. Formation of outflow channels on Mars: Testing the origin of Reull Vallis in Hesperia Planum by large-scale lava-ice interactions and top-down melting

    Science.gov (United States)

    Cassanelli, James P.; Head, James W.

    2018-05-01

    The Reull Vallis outflow channel is a segmented system of fluvial valleys which originates from the volcanic plains of the Hesperia Planum region of Mars. Explanation of the formation of the Reull Vallis outflow channel by canonical catastrophic groundwater release models faces difficulties with generating sufficient hydraulic head, requiring unreasonably high aquifer permeability, and from limited recharge sources. Recent work has proposed that large-scale lava-ice interactions could serve as an alternative mechanism for outflow channel formation on the basis of predictions of regional ice sheet formation in areas that also underwent extensive contemporaneous volcanic resurfacing. Here we assess in detail the potential formation of outflow channels by large-scale lava-ice interactions through an applied case study of the Reull Vallis outflow channel system, selected for its close association with the effusive volcanic plains of the Hesperia Planum region. We first review the geomorphology of the Reull Vallis system to outline criteria that must be met by the proposed formation mechanism. We then assess local and regional lava heating and loading conditions and generate model predictions for the formation of Reull Vallis to test against the outlined geomorphic criteria. We find that successive events of large-scale lava-ice interactions that melt ice deposits, which then undergo re-deposition due to climatic mechanisms, best explains the observed geomorphic criteria, offering improvements over previously proposed formation models, particularly in the ability to supply adequate volumes of water.

  17. Mechanistic Model for Ash Deposit Formation in Biomass Suspension-Fired Boilers. Part 2: Model Verification by Use of Full Scale Tests

    DEFF Research Database (Denmark)

    Hansen, Stine Broholm; Jensen, Peter Arendt; Jappe Frandsen, Flemming

    2017-01-01

    A model for deposit formation in suspension firing of biomass has been developed. The model describes deposit build-up by diffusion and subsequent condensation of vapors, thermoforesis of aerosols, convective diffusion of small particles, impaction of large particles and reaction. The model...... of some physical parameters related to the description of surface capture are suggested. Based on these examinations of the model ability to describe observed deposit formation rates, the proposed model can be regarded as a promising tool for description of deposit formation in full-scale biomass...... describes particle sticking or rebound by a combination of the description of (visco)elsatic particles impacting a solid surface and particle capture by a viscous surface. The model is used to predict deposit formation rates measured during tests conducted with probes in full-scale suspension-fired biomass...

  18. Evolution of multi-mineral formation evaluation using LWD data in complex carbonates offshore Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Ferraris, Paolo; Borovskaya, Irina [Schlumberger, Houston, TX (United States)

    2012-07-01

    Petrophysical Formation Evaluation using Logging While Drilling (LWD) measurements is a new requisite when drilling in carbonates reservoirs offshore Brazil. These reservoirs are difficult to characterize due to an unusual mixture of the minerals constituting the matrix and affecting rock texture. As wells are getting deeper and more expensive, an early identification of the drilled targets potential is necessary for valuable decisions. Brazil operators have been especially demanding towards service providers, pushing for development of suitable services able to positively identify and quantify not only the presence of hydrocarbons but also their flowing capability. In addition to the standard gamma ray / resistivity / porosity and density measurements, three new measurements have proven to be critical to evaluate complex carbonate formations: Nuclear Magnetic Resonance (NMR), Spectroscopy and Capture Cross-Section (sigma). Under appropriate logging conditions, NMR data provides lithology independent porosity, bound and free fluids fractions, reservoir texture and permeability. Capture Spectroscopy allows assessment of mineral composition in terms of calcite, dolomite, quartz and clay fractions, and in addition highlights presence of other heavier minerals. Finally, sigma allows performing a volumetric formation evaluation without requiring custom optimization of the classical exponents used in all forms of resistivity saturation equations. All these new measurements are inherently statistical and if provided by wireline after drilling the well they may result in significant usage of rig time. When acquired simultaneously while drilling they have three very clear advantages: 1) no extra rig time, 2) improved statistics due to long formation exposure (drilling these carbonates is a slow process and rate of penetration (ROP) rarely exceeds 10 m/hr), 3) less invasion effect and better hole condition. This paper describes the development of two LWD tools performing the

  19. Lithofacies and sequence stratigraphic description of the upper part of the Avon Park Formation and the Arcadia Formation in U.S. Geological Survey G–2984 test corehole, Broward County, Florida

    Science.gov (United States)

    Cunningham, Kevin J.; Robinson, Edward

    2017-07-18

    Rock core and sediment from U.S. Geological Survey test corehole G–2984 completed in 2011 in Broward County, Florida, provide an opportunity to improve the understanding of the lithostratigraphic, sequence stratigraphic, and hydrogeologic framework of the intermediate confining unit and Floridan aquifer system in southeastern Florida. A multidisciplinary approach including characterization of sequence stratigraphy, lithofacies, ichnology, foraminiferal paleontology, depositional environments, porosity, and permeability was used to describe the geologic samples from this test corehole. This information has produced a detailed characterization of the lithofacies and sequence stratigraphy of the upper part of the middle Eocene Avon Park Formation and Oligocene to middle Miocene Arcadia Formation. This enhancement of the knowledge of the sequence stratigraphic framework is especially important, because subaerial karst unconformities at the upper boundary of depositional cycles at various hierarchical scales are commonly associated with secondary porosity and enhanced permeability in the Floridan aquifer system.

  20. Push-pull test: a method of evaluating formation adsorption parameters for predicting the environmental effects on in situ coal gasification and uranium recovery

    International Nuclear Information System (INIS)

    Drever, J.I.; McKee, C.R.

    1980-11-01

    The push-pull test, which is a simple injection and pumping sequence of groundwater spiked with solutes of interest, is presented as a method of determining the adsorption characteristics of a formation. Adsorption properties are necessary to predict restoration from both in situ coal gasification and in situ uranium extraction. The major problems in applying laboratory measurements to the field concern scaling the effect of particle size and obtaining representative samples. Laboratory measurements are conducted on gram to kilogram scale samples, whereas the push-pull test evaluates a sample weighing approximately 130 to 1000 metric tons, depending on volume injected and porosity. The problem in translating laboratory results to the field appear to be less severe for sedimentary uranium bodies than for coal. Laboratory measurements are useful in delineating ranges in adsorption properties and in planning the field experiment. Two field push-pull tests were conducted on uranium formations in Wyoming. Adsorption properties estimated from these tests on the basis of a simple cell model were compared to the laboratory values. In the first case, excellent agreement was observed between the values estimated from the field test and the values measured in the laboratory. In the second case, the value for K/sub d/ determined in the laboratory was five times higher than the field value. It is recommended that push-pull tests be conducted on coal formations being considered for in situ gasification in view of the great uncertainty in extrapolating laboratory adsorption properties to the field

  1. Intermediate Scale Laboratory Testing to Understand Mechanisms of Capillary and Dissolution Trapping during Injection and Post-Injection of CO2 in Heterogeneous Geological Formations

    Energy Technology Data Exchange (ETDEWEB)

    Illangasekare, Tissa [Colorado School of Mines, Golden, CO (United States); Trevisan, Luca [Colorado School of Mines, Golden, CO (United States); Agartan, Elif [Colorado School of Mines, Golden, CO (United States); Mori, Hiroko [Colorado School of Mines, Golden, CO (United States); Vargas-Johnson, Javier [Colorado School of Mines, Golden, CO (United States); Gonzalez-Nicolas, Ana [Colorado School of Mines, Golden, CO (United States); Cihan, Abdullah [Colorado School of Mines, Golden, CO (United States); Birkholzer, Jens [Colorado School of Mines, Golden, CO (United States); Zhou, Quanlin [Colorado School of Mines, Golden, CO (United States)

    2015-03-31

    Carbon Capture and Storage (CCS) represents a technology aimed to reduce atmospheric loading of CO2 from power plants and heavy industries by injecting it into deep geological formations, such as saline aquifers. A number of trapping mechanisms contribute to effective and secure storage of the injected CO2 in supercritical fluid phase (scCO2) in the formation over the long term. The primary trapping mechanisms are structural, residual, dissolution and mineralization. Knowledge gaps exist on how the heterogeneity of the formation manifested at all scales from the pore to the site scales affects trapping and parameterization of contributing mechanisms in models. An experimental and modeling study was conducted to fill these knowledge gaps. Experimental investigation of fundamental processes and mechanisms in field settings is not possible as it is not feasible to fully characterize the geologic heterogeneity at all relevant scales and gathering data on migration, trapping and dissolution of scCO2. Laboratory experiments using scCO2 under ambient conditions are also not feasible as it is technically challenging and cost prohibitive to develop large, two- or three-dimensional test systems with controlled high pressures to keep the scCO2 as a liquid. Hence, an innovative approach that used surrogate fluids in place of scCO2 and formation brine in multi-scale, synthetic aquifers test systems ranging in scales from centimeter to meter scale developed used. New modeling algorithms were developed to capture the processes controlled by the formation heterogeneity, and they were tested using the data from the laboratory test systems. The results and findings are expected to contribute toward better conceptual models, future improvements to DOE numerical codes, more accurate assessment of storage capacities, and optimized placement strategies. This report presents the experimental and modeling methods

  2. The Role of Digital, Formative Testing in e-Learning for Mathematics: A Case Study in the Netherlands

    NARCIS (Netherlands)

    Tempelaar, D.T.; Kuperus, B.; Cuypers, H.; van der Kooij, H.; van de Vrie, E.; Heck, A.

    2012-01-01

    Repeated formative, diagnostic assessment lies at the heart of student-centred learning, providing students with a continuous stream of information on the mastery of diff erent topics and making suggestions to optimize the choice of subsequent learning activities. When integrated into a system of

  3. Investigating SO3 Formation from the Combustion of Heavy Fuel Oil in a Four-Stroke Medium Speed Test Engine

    DEFF Research Database (Denmark)

    Cordtz, Rasmus Lage; Schramm, Jesper; Rabe, Rom

    2013-01-01

    The validation of detailed models, in terms of SO3 formation in large marine engines operating on sulfur-containing heavy fuel oils (HFOs), relies on experimental work. The requisite is addressed in the present work, where SO3 is measured in the exhaust gas of an 80 kW medium-speed single-cylinde...

  4. Assessment of covalent bond formation between coupling agents and wood by FTIR spectroscopy and pull strength tests

    DEFF Research Database (Denmark)

    Rasmussen, Jonas Stensgaard; Barsberg, Søren Talbro; Venås, Thomas Mark

    2014-01-01

    In the focus was the question whether metal alkoxide coupling agents – titanium, silane, and zirconium – form covalent bonds to wood and how they improve coating adhesion. In a previous work, a downshift of the lignin infrared (IR) band ∼1600 cm-1 was shown to be consistent with the formation of ...... importance for improved wood coating adhesion....

  5. The value of Retrospective and Concurrent Think Aloud in formative usability testing of a physician data query tool

    NARCIS (Netherlands)

    Peute, Linda W. P.; de Keizer, Nicolette F.; Jaspers, Monique W. M.

    2015-01-01

    To compare the performance of the Concurrent (CTA) and Retrospective (RTA) Think Aloud method and to assess their value in a formative usability evaluation of an Intensive Care Registry-physician data query tool designed to support ICU quality improvement processes. Sixteen representative intensive

  6. Mutagens from the cooking of food. III. Survey by Ames/Salmonella test of mutagen formation in secondary sources of cooked dietary protein.

    Science.gov (United States)

    Bjeldanes, L F; Morris, M M; Felton, J S; Healy, S; Stuermer, D; Berry, P; Timourian, H; Hatch, F T

    1982-08-01

    A survey of mutagen formation during the cooking of a variety of protein-rich foods that are minor sources of protein intake in the American diet is reported (see Bjeldanes, Morris, Felton et al. (1982) for survey of major protein foods). Milk, cheese, tofu and organ meats showed negligible mutagen formation except following high-temperature cooking for long periods of time. Even under the most extreme conditions, tofu, cheese and milk exhibited fewer than 500 Ames/Salmonella typhimurium revertants/100 g equivalents (wet weight of uncooked food), and organ meats only double that amount. Beans showed low mutagen formation after boiling and boiling followed by frying (with and without oil). Only boiling of beans followed by baking for 1 hr gave appreciable mutagenicity (3650 revertants/100g equivalents). Seafood samples gave a variety of results: red snapper, salmon, trout, halibut and rock cod all gave more than 1000 revertants/100 g wet weight equivalents when pan-fried or griddle-fried for about 6 min/side. Baked or poached rock and deep-fried shrimp showed no significant mutagen formation. Broiled lamb chops showed mutagen formation similar to that in red meats tested in the preceding paper: 16,000 revertants/100 g equivalents. These findings show that as measured by bioassay in S. typhimurium, most of the foods that are minor sources of protein in the American diet are also minor sources of cooking-induced mutagens.

  7. 40 CFR Figure C-1 to Subpart C of... - Suggested Format for Reporting Test Results for Methods for SO 2, CO, O 3, NO 2

    Science.gov (United States)

    2010-07-01

    ... Results for Methods for SO 2, CO, O 3, NO 2 C Figure C-1 to Subpart C of Part 53 Protection of Environment... Pt. 53, Subpt. C, Fig. C-1 Figure C-1 to Subpart C of Part 53—Suggested Format for Reporting Test... Difference Table C-1 spec. Pass or fail Low 1 ____ ppm 2 to ____ ppm 3 4 5 6 Medium 1 ____ ppm 2 to ____ ppm...

  8. The role of retrieval mode and retrieval orientation in retrieval practice: insights from comparing recognition memory testing formats and restudying.

    Science.gov (United States)

    Gao, Chuanji; Rosburg, Timm; Hou, Mingzhu; Li, Bingbing; Xiao, Xin; Guo, Chunyan

    2016-12-01

    The effectiveness of retrieval practice for aiding long-term memory, referred to as the testing effect, has been widely demonstrated. However, the specific neurocognitive mechanisms underlying this phenomenon remain unclear. In the present study, we sought to explore the role of pre-retrieval processes at initial testing on later recognition performance by using event-related potentials (ERPs). Subjects studied two lists of words (Chinese characters) and then performed a recognition task or a source memory task, or restudied the word lists. At the end of the experiment, subjects received a final recognition test based on the remember-know paradigm. Behaviorally, initial testing (active retrieval) enhanced memory retention relative to restudying (passive retrieval). The retrieval mode at initial testing was indexed by more positive-going ERPs for unstudied items in the active-retrieval tasks than in passive retrieval from 300 to 900 ms. Follow-up analyses showed that the magnitude of the early ERP retrieval mode effect (300-500 ms) was predictive of the behavioral testing effect later on. In addition, the ERPs for correctly rejected new items during initial testing differed between the two active-retrieval tasks from 500 to 900 ms, and this ERP retrieval orientation effect predicted differential behavioral testing gains between the two active-retrieval conditions. Our findings confirm that initial testing promotes later retrieval relative to restudying, and they further suggest that adopting pre-retrieval processing in the forms of retrieval mode and retrieval orientation might contribute to these memory enhancements.

  9. Comparison of patient comprehension of rapid HIV pre-test fundamentals by information delivery format in an emergency department setting

    Directory of Open Access Journals (Sweden)

    Clark Melissa A

    2007-09-01

    Full Text Available Abstract Background Two trials were conducted to compare emergency department patient comprehension of rapid HIV pre-test information using different methods to deliver this information. Methods Patients were enrolled for these two trials at a US emergency department between February 2005 and January 2006. In Trial One, patients were randomized to a no pre-test information or an in-person discussion arm. In Trial Two, a separate group of patients were randomized to an in-person discussion arm or a Tablet PC-based video arm. The video, "Do you know about rapid HIV testing?", and the in-person discussion contained identical Centers for Disease Control and Prevention-suggested pre-test information components as well as information on rapid HIV testing with OraQuick®. Participants were compared by information arm on their comprehension of the pre-test information by their score on a 26-item questionnaire using the Wilcoxon rank-sum test. Results In Trial One, 38 patients completed the no-information arm and 31 completed the in-person discussion arm. Of these 69 patients, 63.8% had twelve years or fewer of formal education and 66.7% had previously been tested for HIV. The mean score on the questionnaire for the in-person discussion arm was higher than for the no information arm (18.7 vs. 13.3, p ≤ 0.0001. In Trial Two, 59 patients completed the in-person discussion and 55 completed the video arms. Of these 114 patients, 50.9% had twelve years or fewer of formal education and 68.4% had previously been tested for HIV. The mean score on the questionnaire for the video arm was similar to the in-person discussion arm (20.0 vs. 19.2; p ≤ 0.33. Conclusion The video "Do you know about rapid HIV testing?" appears to be an acceptable substitute for an in-person pre-test discussion on rapid HIV testing with OraQuick®. In terms of adequately informing ED patients about rapid HIV testing, either form of pre-test information is preferable than for patients

  10. Comparison of patient comprehension of rapid HIV pre-test fundamentals by information delivery format in an emergency department setting

    Science.gov (United States)

    Merchant, Roland C; Gee, Erin M; Clark, Melissa A; Mayer, Kenneth H; Seage, George R; DeGruttola, Victor G

    2007-01-01

    Background Two trials were conducted to compare emergency department patient comprehension of rapid HIV pre-test information using different methods to deliver this information. Methods Patients were enrolled for these two trials at a US emergency department between February 2005 and January 2006. In Trial One, patients were randomized to a no pre-test information or an in-person discussion arm. In Trial Two, a separate group of patients were randomized to an in-person discussion arm or a Tablet PC-based video arm. The video, "Do you know about rapid HIV testing?", and the in-person discussion contained identical Centers for Disease Control and Prevention-suggested pre-test information components as well as information on rapid HIV testing with OraQuick®. Participants were compared by information arm on their comprehension of the pre-test information by their score on a 26-item questionnaire using the Wilcoxon rank-sum test. Results In Trial One, 38 patients completed the no-information arm and 31 completed the in-person discussion arm. Of these 69 patients, 63.8% had twelve years or fewer of formal education and 66.7% had previously been tested for HIV. The mean score on the questionnaire for the in-person discussion arm was higher than for the no information arm (18.7 vs. 13.3, p ≤ 0.0001). In Trial Two, 59 patients completed the in-person discussion and 55 completed the video arms. Of these 114 patients, 50.9% had twelve years or fewer of formal education and 68.4% had previously been tested for HIV. The mean score on the questionnaire for the video arm was similar to the in-person discussion arm (20.0 vs. 19.2; p ≤ 0.33). Conclusion The video "Do you know about rapid HIV testing?" appears to be an acceptable substitute for an in-person pre-test discussion on rapid HIV testing with OraQuick®. In terms of adequately informing ED patients about rapid HIV testing, either form of pre-test information is preferable than for patients to receive no pre-test

  11. "Students want HIV testing in schools" a formative evaluation of the acceptability of HIV testing and counselling at schools in Gauteng and North West provinces in South Africa.

    Science.gov (United States)

    Madiba, Sphiwe; Mokgatle, Mathilda

    2015-04-17

    The proposal by the South African Health Ministry to implement HIV testing and counselling (HTC) at schools in 2011 generated debates about the appropriateness of such testing. However, the debate has been between the Ministries of Education and Health, with little considerations of the students. The main aim of the study was to assess the students' opinions and uptake of HIV testing and counselling in general, and the acceptability of the provision of HIV testing and counselling in schools. The study also determined the association between socio-demographic characteristics, sexual behaviour, and HIV testing behaviour of the students. A survey was conducted among grade 10-12 high school students in North West and Gauteng provinces, South Africa. Seventeen high schools (nine rural and eight urban) were randomly selected for the administration of a researcher-assisted, self-administered, semi-structured questionnaire. A total of 2970 students aged 14-27 years participated in the study; 1632 (55%) were girls, 1810 (61%) ever had sex, and 1271 (49.8%) had more than one sex partner. The mean age of first sexual activity was 15.6. Half (n = 1494, 50.1%) had been tested for HIV. Having multiple sexual partners, age, and gender were significantly associated with increased odds of having had a HIV test. Fear, being un-informed about HTC, and low HIV risk perceptions were the reasons for not getting tested. The acceptability of HTC at school was high (n = 2282, 76.9%) and 2129 (71.8%) were willing to be tested at school. Appropriateness, privacy, and secrecy were the main arguments for and against HTC at school. One-third (n = 860, 29%) had intentions to disclose their HIV status to students versus 1258 (42.5%) for teachers. Stigma, discrimination and secrecy were the primary reasons students did not intend to disclose. A high acceptability of HTC and willingness to be tested at school suggest that HIV prevention programs tailored to youth have a high potential of success

  12. A report on the piloting of a novel computer-based medical case simulation for teaching and formative assessment of diagnostic laboratory testing

    Directory of Open Access Journals (Sweden)

    Clarence D. Kreiter

    2011-01-01

    Full Text Available Objectives: Insufficient attention has been given to how information from computer-based clinical case simulations is presented, collected, and scored. Research is needed on how best to design such simulations to acquire valid performance assessment data that can act as useful feedback for educational applications. This report describes a study of a new simulation format with design features aimed at improving both its formative assessment feedback and educational function. Methods: Case simulation software (LabCAPS was developed to target a highly focused and well-defined measurement goal with a response format that allowed objective scoring. Data from an eight-case computer-based performance assessment administered in a pilot study to 13 second-year medical students was analyzed using classical test theory and generalizability analysis. In addition, a similar analysis was conducted on an administration in a less controlled setting, but to a much large sample (n=143, within a clinical course that utilized two random case subsets from a library of 18 cases. Results: Classical test theory case-level item analysis of the pilot assessment yielded an average case discrimination of 0.37, and all eight cases were positively discriminating (range=0.11–0.56. Classical test theory coefficient alpha and the decision study showed the eight-case performance assessment to have an observed reliability of σ=G=0.70. The decision study further demonstrated that a G=0.80 could be attained with approximately 3 h and 15 min of testing. The less-controlled educational application within a large medical class produced a somewhat lower reliability for eight cases (G=0.53. Students gave high ratings to the logic of the simulation interface, its educational value, and to the fidelity of the tasks. Conclusions: LabCAPS software shows the potential to provide formative assessment of medical students’ skill at diagnostic test ordering and to provide valid feedback to

  13. Using Automated Processes to Generate Test Items And Their Associated Solutions and Rationales to Support Formative Feedback

    Directory of Open Access Journals (Sweden)

    Mark Gierl

    2015-08-01

    Full Text Available Automatic item generation is the process of using item models to produce assessment tasks using computer technology. An item model is similar to a template that highlights the elements in the task that must be manipulated to produce new items. The purpose of our study is to describe an innovative method for generating large numbers of diverse and heterogeneous items along with their solutions and associated rationales to support formative feedback. We demonstrate the method by generating items in two diverse content areas, mathematics and nonverbal reasoning

  14. Testing the Formation Scenarios of Binary Neutron Star Systems with Measurements of the Neutron Star Moment of Inertia

    Science.gov (United States)

    Newton, William G.; Steiner, Andrew W.; Yagi, Kent

    2018-03-01

    Two low-mass (M Advanced LIGO can potentially measure the neutron star tidal polarizability to equivalent accuracy which, using the I-Love-Q relations, would obtain similar constraints on the formation scenarios. Such information would help constrain important aspects of binary evolution used for population synthesis predictions of the rate of binary neutron star mergers and resulting electromagnetic and gravitational wave signals. Further progress needs to be made in modeling the core-collapse process that leads to low-mass neutron stars, particularly in making robust predictions for the mass loss from the progenitor core.

  15. Rates of star formation

    International Nuclear Information System (INIS)

    Larson, R.B.

    1977-01-01

    It is illustrated that a theoretical understanding of the formation and evolution of galaxies depends on an understanding of star formation, and especially of the factors influencing the rate of star formation. Some of the theoretical problems of star formation in galaxies, some approaches that have been considered in models of galaxy evolution, and some possible observational tests that may help to clarify which processes or models are most relevant are reviewed. The material is presented under the following headings: power-law models for star formation, star formation processes (conditions required, ways of achieving these conditions), observational indications and tests, and measures of star formation rates in galaxies. 49 references

  16. TEST CONTROL AS A MODERN APPROACH TO THE FORMATION OF THE EDUCATIONAL PROCESS AT THE DEPARTMENT OF PROSTHETIC DENTISTRY

    OpenAIRE

    Dmytrenko, I. A.

    2015-01-01

    Nowadays test control is very popular in Ukraine. It is used in addition to traditional methods of knowledge control in higher educational institutions at various specialties.Test control provides the establishment of the level of success of individual students in general; allows the teacher to judge the quality of mastering topics, plan his work and correct methods of material study timely. It helps to improve students’ preparation due to performing tasks by repeating, systematization and cl...

  17. GeoTemp™ 1.0: A MATLAB-based program for the processing, interpretation and modelling of geological formation temperature measurements

    Science.gov (United States)

    Ricard, Ludovic P.; Chanu, Jean-Baptiste

    2013-08-01

    The evaluation of potential and resources during geothermal exploration requires accurate and consistent temperature characterization and modelling of the sub-surface. Existing interpretation and modelling approaches of 1D temperature measurements are mainly focusing on vertical heat conduction with only few approaches that deals with advective heat transport. Thermal regimes are strongly correlated to rock and fluid properties. Currently, no consensus exists for the identification of the thermal regime and the analysis of such dataset. We developed a new framework allowing the identification of thermal regimes by rock formations, the analysis and modelling of wireline logging and discrete temperature measurements by taking into account the geological, geophysical and petrophysics data. This framework has been implemented in the GeoTemp software package that allows the complete thermal characterization and modelling at the formation scale and that provides a set of standard tools for the processing wireline and discrete temperature data. GeoTempTM operates via a user friendly graphical interface written in Matlab that allows semi-automatic calculation, display and export of the results. Output results can be exported as Microsoft Excel spreadsheets or vector graphics of publication quality. GeoTemp™ is illustrated here with an example geothermal application from Western Australia and can be used for academic, teaching and professional purposes.

  18. Dead reckoning (path integration) requires the hippocampal formation: evidence from spontaneous exploration and spatial learning tasks in light (allothetic) and dark (idiothetic) tests.

    Science.gov (United States)

    Whishaw, I Q; Hines, D J; Wallace, D G

    2001-12-14

    Animals navigate using cues generated by their own movements (self-movement cues or idiothetic cues), as well as the cues they encounter in their environment (distal cues or allothetic cues). Animals use these cues to navigate in two different ways. When dead reckoning (deduced reckoning or path integration), they integrate self-movement cues over time to locate a present position or to return to a starting location. When piloting, they use allothetic cues as beacons, or they use the relational properties of allothetic cues to locate places in space. The neural structures involved in cue use and navigational strategies are still poorly understood, although considerable attention is directed toward the contributions of the hippocampal formation (hippocampus and associated pathways and structures, including the fimbria-fornix and the retrosplenial cortex). In the present study, using tests in allothetic and idiothetic paradigms, we present four lines of evidence to support the hypothesis that the hippocampal formation plays a central role in dead reckoning. (1) Control but not fimbria-fornix lesion rats can return to a novel refuge location in both light and dark (infrared) food carrying tasks. (2). Control but not fimbria-fornix lesion rats make periodic direct high velocity returns to a starting location in both light and dark exploratory tests. Control but not fimbria-fornix rats trained in the light to carry food from a fixed location to a refuge are able to maintain accurate outward and homebound trajectories when tested in the dark. (3). Control but not fimbria-fornix rats are able to correct an outward trajectory to a food source when the food source is moved when allothetic cues are present. These, tests of spontaneous exploration and foraging suggest a role for the hippocampal formation in dead reckoning.

  19. Strontium isotopes test long-term zonal isolation of injected and Marcellus formation water after hydraulic fracturing.

    Science.gov (United States)

    Kohl, Courtney A Kolesar; Capo, Rosemary C; Stewart, Brian W; Wall, Andrew J; Schroeder, Karl T; Hammack, Richard W; Guthrie, George D

    2014-08-19

    One concern regarding unconventional hydrocarbon production from organic-rich shale is that hydraulic fracture stimulation could create pathways that allow injected fluids and deep brines from the target formation or adjacent units to migrate upward into shallow drinking water aquifers. This study presents Sr isotope and geochemical data from a well-constrained site in Greene County, Pennsylvania, in which samples were collected before and after hydraulic fracturing of the Middle Devonian Marcellus Shale. Results spanning a 15-month period indicated no significant migration of Marcellus-derived fluids into Upper Devonian/Lower Mississippian units located 900-1200 m above the lateral Marcellus boreholes or into groundwater sampled at a spring near the site. Monitoring the Sr isotope ratio of water from legacy oil and gas wells or drinking water wells can provide a sensitive early warning of upward brine migration for many years after well stimulation.

  20. Kinetic Testing of Nitrate-Based Sodalite Formation Over the Temperature Range of 40 to 100 Degrees Centigrade (Final Report)

    Energy Technology Data Exchange (ETDEWEB)

    Mattus, A.J.

    2001-09-07

    The focus of this study was the desilication kinetics of a Savannah River Site (SRS) tank farm 2H simulant over the temperature range of 40 to 100 C. Results showed that the formation of nitrate-nitrite-based sodalite over aluminum-to-silicon (Al:Si) molar ratios ranging from 1:1 to 20:1 exhibited overall-second order kinetics. The Arrhenius apparent activation energy associated with the crystal growth process of the sodalite was determined to be 35 kJ/mol over the temperature range investigated. Second-order rate constants were extrapolated to the 2H evaporator working temperature of {approx} 130 C and were found to be 0.012 L mol{sup -1} s{sup -1}. At this operating temperature, the half-life of a limiting reactant with a 0.1 M feed would be 14 min.

  1. Corrosion testing of selected packaging materials for disposal of high-level waste glass in rock salt formations

    International Nuclear Information System (INIS)

    Smailos, E.; Schwarzkopf, W.; Koester, R.; Fiehn, B.; Halm, G.

    1990-05-01

    In previous corrosion studies performed in salt brines, unalloyed steels, Ti 99.8-Pd and Hastelloy C4 have proved to be the most promising materials for long-term resistant packagings to be used in heat-generating waste (vitrified HLW, spent fuel) disposal in rock-salt formations. To characterise the corrosion behaviour of these materials in more detail, further in-depth laboratory-scale and in-situ corrosion studies have been performed in the present study. Besides the above-mentioned materials, also some in-situ investigations of the iron-base materials Ni-Resist D2 and D4, cast iron and Si-cast iron have been carried out in order to complete the results available to date. (orig.) [de

  2. A pre-validation trial - testing genotoxicity of several chemicals using standard, medium- and high-throughput comet formats.

    Directory of Open Access Journals (Sweden)

    Kristine Bjerve Gutzkow

    2015-06-01

    Results obtained with the three systems (standard, medium- and high-throughput were essentially the same. The 96-minigel format was analysed with the fully automated scoring system IMSTAR and comparable results were achieved with the semi-automated scoring system from Perceptives. The known genotoxic chemicals MNU, B(aP, 4-NQO and cyclophosphamide showed little consistent sign of genotoxicity at concentrations causing limited cytotoxicity. D-mannitol and Triton X-100 were, as expected, non-genotoxic (though Triton X-100, at high concentrations, caused DNA breaks as an apparent secondary effect of cytotoxicity. Etoposide and bleomycin gave significant increase in DNA strand break at borderline cytotoxic concentrations. The limitation of the assay to detect damaged bases by known genotoxins may be overcome by incorporating a DNA repair enzyme, such as formamidopyrimidine-DNA-glycosylase (FPG, to convert damaged bases into breaks as shown by Azqueta A et al., Mutagenesis vol. 28 no. 3 pp. 271–277, 2013 .

  3. Warmed up for ten-year test in the Boom Clay formation PRACLAY Heater Experiment is launched

    International Nuclear Information System (INIS)

    2015-01-01

    The article discusses latest developments concerning the PRACLAY Heater Experiment. The PRACLAY experiment investigates the impact of heat on the properties of clay adjacent to a repository for the geological disposal of radioactive waste. Results from the PRACLAY experiment will provide significant input for the NIRAS research programme on the disposal of high-level and long-lived radioactive waste in clay formations.The heating phase of the PRACLAY underground experiment was launched in 2014. The latest preparations comprised the improvement and installation of a back-up heating system. In the future, the control, monitoring, and analysis and interpretation of the measured data will receive the greatest attention in the PRACLAY Heater Experiment.

  4. Alternate assessment use with students who are deaf or hard of hearing: an exploratory mixed-methods analysis of portfolio, checklists, and out-of-level test formats.

    Science.gov (United States)

    Cawthon, Stephanie W; Wurtz, Keith A

    2009-01-01

    The purpose of this paper is to present findings on alternate assessments for students who are deaf or hard of hearing (SDHH). Drawn from the results of the "Second National Survey of Assessments and Accommodations for Students Who Are Deaf or Hard of Hearing," this study investigated three alternate assessment formats: portfolio, checklists, and out-of-level testing. Analysis includes descriptive data of alternate assessment use across all three formats, qualitative analyses of teacher perspectives, and an exploratory logistic regression analysis on predictors of alternate assessment use. This exploratory analysis looks at predictors such as state policy, educational setting, grades served, language of instruction, and participant perspectives. Results indicate that predictors at the student, teacher, and system level may influence alternate assessment use for SDHH.

  5. Test

    DEFF Research Database (Denmark)

    Bendixen, Carsten

    2014-01-01

    Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers.......Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers....

  6. Protective structures on the surface of zirconium components of light water reactor cores: Formation, testing, and prototype equipment

    Energy Technology Data Exchange (ETDEWEB)

    Begrambekov, L. B.; Gordeev, A. A.; Evsin, A. E., E-mail: evsin@plasma.mephi.ru; Ivanova, S. V.; Kaplevsky, A. S.; Sadovskiy, Ya. A. [National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) (Russian Federation)

    2015-12-15

    The results of tests of plasma treatment of zirconium and deposition of protective yttrium coatings used as the methods of protection of zirconium components of light water reactor cores against hydrogenation are detailed. The amount of hydrogen in the treated sample exposed to superheated steam for 2500 h at temperature T = 400°C and pressure p = 1 atm was five times lower than the corresponding value for the untreated one. The amount of hydrogen in the sample coated with yttrium remained almost unchanged in 4000 h of exposure. A plasma method for rapid testing for hydrogen resistance is proposed. The hydrogenation rate provided by this method is 700 times higher than that in tests with superheated steam. The results of preliminary experiments confirm the possibility of constructing a unit for batch processing of the surfaces of fuel rod claddings.

  7. Protective structures on the surface of zirconium components of light water reactor cores: Formation, testing, and prototype equipment

    Science.gov (United States)

    Begrambekov, L. B.; Gordeev, A. A.; Evsin, A. E.; Ivanova, S. V.; Kaplevsky, A. S.; Sadovskiy, Ya. A.

    2015-12-01

    The results of tests of plasma treatment of zirconium and deposition of protective yttrium coatings used as the methods of protection of zirconium components of light water reactor cores against hydrogenation are detailed. The amount of hydrogen in the treated sample exposed to superheated steam for 2500 h at temperature T = 400°C and pressure p = 1 atm was five times lower than the corresponding value for the untreated one. The amount of hydrogen in the sample coated with yttrium remained almost unchanged in 4000 h of exposure. A plasma method for rapid testing for hydrogen resistance is proposed. The hydrogenation rate provided by this method is 700 times higher than that in tests with superheated steam. The results of preliminary experiments confirm the possibility of constructing a unit for batch processing of the surfaces of fuel rod claddings.

  8. Regional long-term production modeling from a single well test, Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

    Science.gov (United States)

    Anderson, B.J.; Kurihara, M.; White, M.D.; Moridis, G.J.; Wilson, S.J.; Pooladi-Darvish, M.; Gaddipati, M.; Masuda, Y.; Collett, T.S.; Hunter, R.B.; Narita, H.; Rose, K.; Boswell, R.

    2011-01-01

    Following the results from the open-hole formation pressure response test in the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well (Mount Elbert well) using Schlumberger's Modular Dynamics Formation Tester (MDT) wireline tool, the International Methane Hydrate Reservoir Simulator Code Comparison project performed long-term reservoir simulations on three different model reservoirs. These descriptions were based on 1) the Mount Elbert gas hydrate accumulation as delineated by an extensive history-matching exercise, 2) an estimation of the hydrate accumulation near the Prudhoe Bay L-pad, and 3) a reservoir that would be down-dip of the Prudhoe Bay L-pad and therefore warmer and deeper. All of these simulations were based, in part, on the results of the MDT results from the Mount Elbert Well. The comparison group's consensus value for the initial permeability of the hydrate-filled reservoir (k = 0.12 mD) and the permeability model based on the MDT history match were used as the basis for subsequent simulations on the three regional scenarios. The simulation results of the five different simulation codes, CMG STARS, HydrateResSim, MH-21 HYDRES, STOMP-HYD, and TOUGH+HYDRATE exhibit good qualitative agreement and the variability of potential methane production rates from gas hydrate reservoirs is illustrated. As expected, the predicted methane production rate increased with increasing in situ reservoir temperature; however, a significant delay in the onset of rapid hydrate dissociation is observed for a cold, homogeneous reservoir and it is found to be repeatable. The inclusion of reservoir heterogeneity in the description of this cold reservoir is shown to eliminate this delayed production. Overall, simulations utilized detailed information collected across the Mount Elbert reservoir either obtained or determined from geophysical well logs, including thickness (37 ft), porosity (35%), hydrate saturation (65%), intrinsic permeability (1000 mD), pore water

  9. Regional long-term production modeling from a single well test, Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Brian J.; Kurihara, Masanori; White, Mark D.; Moridis, George J.; Wilson, Scott J.; Pooladi-Darvish, Mehran; Gaddipati, Manohar; Masuda, Yoshihiro; Collett, Timothy S.; Hunter, Robert B.; Narita, Hideo; Rose, Kelly; Boswell, Ray

    2011-02-01

    Following the results from the open-hole formation pressure response test in the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well (Mount Elbert well) using Schlumberger's Modular Dynamics Formation Tester (MDT) wireline tool, the International Methane Hydrate Reservoir Simulator Code Comparison project performed long-term reservoir simulations on three different model reservoirs. These descriptions were based on 1) the Mount Elbert gas hydrate accumulation as delineated by an extensive history-matching exercise, 2) an estimation of the hydrate accumulation near the Prudhoe Bay L-pad, and 3) a reservoir that would be down-dip of the Prudhoe Bay L-pad and therefore warmer and deeper. All of these simulations were based, in part, on the results of the MDT results from the Mount Elbert Well. The comparison group's consensus value for the initial permeability of the hydrate-filled reservoir (k = 0.12 mD) and the permeability model based on the MDT history match were used as the basis for subsequent simulations on the three regional scenarios. The simulation results of the five different simulation codes, CMG STARS, HydrateResSim, MH-21 HYDRES, STOMP-HYD, and TOUGH+HYDRATE exhibit good qualitative agreement and the variability of potential methane production rates from gas hydrate reservoirs is illustrated. As expected, the predicted methane production rate increased with increasing in situ reservoir temperature; however, a significant delay in the onset of rapid hydrate dissociation is observed for a cold, homogeneous reservoir and it is found to be repeatable. The inclusion of reservoir heterogeneity in the description of this cold reservoir is shown to eliminate this delayed production. Overall, simulations utilized detailed information collected across the Mount Elbert reservoir either obtained or determined from geophysical well logs, including thickness (37 ft), porosity (35%), hydrate saturation (65%), intrinsic permeability (1000 mD), pore

  10. Testing geopressured geothermal reservoirs in existing wells: Detailed completion prognosis for geopressured-geothermal well of opportunity, prospect #2

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    A geopressured-geothermal test of Martin Exploration Company's Crown Zellerbach Well No. 2 will be conducted in the Tuscaloosa Trend. The Crown Zellerbach Well No. 1 will be converted to a saltwater disposal well for disposal of produced brine. The well is located in the Satsuma Area, Livingston parish, Louisiana. Eaton proposes to test the Tuscaloosa by perforating the 7 inch casing from 16,718 feet to 16,754 feet. The reservoir pressure at an intermediate formation depth of 16,736 feet is anticipated to be 12,010 psi and the temperature is anticipated to be 297 F. Calculated water salinity is 16,000 ppm. The well is expected to produce a maximum of 16,000 barrels of water a day with a gas content of 51 SCF/bbl. Eaton will re-enter the test well, clean out to 17,000 feet, run production casing and complete the well. The disposal well will be re-entered and completed in the 9-5/8 inch casing for disposal of produced brine. Testing will be conducted similar to previous Eaton annular flow WOO tests. An optional test from 16,462 feet to 16,490 feet may be performed after the original test and will require a workover with a rig on location to perform the plugback. The surface production equipment utilized on previous tests will be utilized on this test. The equipment has worked satisfactorily and all parties involved in the testing are familiar with its operation. Weatherly Engineering will operate the test equipment. The Institute of Gas Technology (IGT) and Mr. Don Clark will handle sampling, testing and reservoir engineering evaluation, respectively. wireline work required will be awarded on basis of bid evaluation. At the conclusion of the test period, the D.O.E. owned test equipment will be removed from the test site, the test and disposal wells plugged and abandoned and the sites restored to the satisfaction of all parties.

  11. National Reading Tests in Denmark, Norway, and Sweden: A Comparison of Construct Definitions, Cognitive Targets, and Response Formats

    Science.gov (United States)

    Tengberg, Michael

    2017-01-01

    Reading comprehension tests are often assumed to measure the same, or at least similar, constructs. Yet, reading is not a single but a multidimensional form of processing, which means that variations in terms of reading material and item design may emphasize one aspect of the construct at the cost of another. The educational systems in Denmark,…

  12. Towards an Integrative Formative Approach of Data-Driven Decision Making, Assessment for Learning, and Diagnostic Testing

    NARCIS (Netherlands)

    Vermeulen, Jorine A.; van der Kleij, Fabienne M.; Eggen, Theodorus Johannes Hendrikus Maria; Veldkamp, Bernard P.

    2012-01-01

    This study concerns the comparison of three approaches to assessment: Data-Driven Decision Making, Assessment for Learning, and Diagnostic Testing. Although the three approaches claim to be beneficial with regard to student learning, no clear study into the relationships and distinctions between

  13. Implementation of subsea system to monitor in-situ temperature and formation pressure in methane hydrates sediments for the production test in 2017, offshore Japan

    Science.gov (United States)

    Nishimoto, K.

    2016-12-01

    The methane hydrates phase changes, from solid to fluid, is governed by pressure drop and heat transportation through a geological formation. For the world's first offshore production test of methane hydrates conducted in 2013, the MH21 research team installed distributed temperature sensing (DTS) cables and array type resistance temperature devices (RTD) behind the casings of the monitoring wells. The temperature monitoring was continued over the period of 18 months. As a result, the thermal response of the methane hydrate-bearing sediment during depressurization was observed, and the obtained data was used to evaluate the methane dissociation behavior and to estimate the dissociation front radius from a producer well. The second offshore production test is planned in the same area in 2017 with the extended period up to one month. Two sets of a pair of monitoring and producer well were drilled in 2016. A pair of monitoring and producer wells is only 20m apart. An improved monitoring system is prepared for the second test with additional pressure measurement capability with new features of subsea system. The planed formation pressure measurement is expected to contribute not only for the evaluation of methane hydrate phase changes and estimation of its areal distribution but also the analyzing the interference in the vicinity of the producer wells from the geo-mechanical point of view. The DTS resolution was improved with longer averaging time than the previously utilized system. To accomplish the continuous acquisition up running over longer than 18 months to cover pre-flow and post-flow periods, the subsea acquisition system was equipped with an exchangeable subsea batteries by ROV. As for the surface communication method, the acoustic transponder was added in the subsea system. In this technical presentation, the improvements on the monitoring system are discussed and the scientific objectives for new measurements such as formation pressure are presented.

  14. Online Self-testing Resources Prepared by Peer Tutors as a Formative Assessment Tool in Pharmacology Courses.

    Science.gov (United States)

    Lull, Melinda E; Mathews, Jennifer L

    2016-09-25

    Objective. To assess the effectiveness of optional online quizzes written by peer tutors in a pharmacology course for doctor of pharmacy students. Methods. Online quizzes were written by peer tutors for second-year pharmacy students. Quizzes reflected the material taught during lecture and were in a format similar to that of the examinations. Data related to performance on each quiz and each examination were collected throughout the semester. At the end of the semester, students and peer tutors were surveyed to gather information on the utility and success of the quizzes. Results. Students taking online quizzes performed significantly better on examinations than those who did not take quizzes. In addition, students received higher scores on examinations than when practicing with the quizzes. Surveys suggest that students liked the quizzes and felt they increased their confidence and performance on examinations. Conclusion. The quizzes were beneficial to student performance on examinations as well as student perception of performance and confidence going into the examinations. Quizzes were also beneficial learning experiences for peer tutors.

  15. Investigation of gas hydrate-bearing sandstone reservoirs at the Mount Elbert stratigraphic test well, Milne Point, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Boswell, R. [United States Dept. of Energy, Morgantown, WV (United States). National Energy Technology Lab; Hunter, R. [ASRC Energy Services, Anchorage, AK (United States); Collett, T. [United States Geological Survey, Denver, CO (United States); Digert, S.; Weeks, M. [BP Exploration Alaska Inc., Anchorage, AK (United States); Hancock, S. [RPS Energy Canada, Calgary, AB (Canada)

    2008-07-01

    Gas hydrates occur within the shallow sand reservoirs on the Alaska North Slope (ANS). The mean estimate for gas hydrate in-place resources on the ANS is 16.7 trillion cubic metres. In the past, they were viewed primarily as a drilling hazard to be managed during the development of deeper oil resources. In 2002, a cooperative research program was launched to help determine the potential for environmentally-sound and economically-viable production of methane from gas hydrates. Additional objectives were to refine ANS gas hydrate resource potential, improve the geologic and geophysical methods used to locate and asses gas hydrate resources, and develop numerical modeling capabilities that are essential in both planning and evaluating gas hydrate field programs. This paper reviewed the results of the an extensive data collection effort conducted at the Mount Elbert number 1 gas hydrates stratigraphic test well on the ANS. The 22-day field program acquired significant gas hydrate-bearing reservoir data, including a suite of open-hole well logs, over 500 feet of continuous core, and open-hole formation pressure response tests. The logging program confirmed the existence of approximately 30 m of gas hydrate saturated, fine-grained sand reservoir. Gas hydrate saturations were observed to range from 60 to 75 per cent. Continuous wire-line coring operations achieved 85 per cent recovery. The Mount Elbert field program also involved gas and water sample collection. It demonstrated the ability to safely and efficiently conduct a research-level open-hole data acquisition program in shallow, sub-permafrost sediments and increased confidence in gas hydrate resource assessment methodologies for the ANS. 10 refs., 9 figs.

  16. Multi-level slug tests in highly permeable formations: 2. Hydraulic conductivity identification, method verification, and field applications

    Science.gov (United States)

    Zlotnik, V.A.; McGuire, V.L.

    1998-01-01

    Using the developed theory and modified Springer-Gelhar (SG) model, an identification method is proposed for estimating hydraulic conductivity from multi-level slug tests. The computerized algorithm calculates hydraulic conductivity from both monotonic and oscillatory well responses obtained using a double-packer system. Field verification of the method was performed at a specially designed fully penetrating well of 0.1-m diameter with a 10-m screen in a sand and gravel alluvial aquifer (MSEA site, Shelton, Nebraska). During well installation, disturbed core samples were collected every 0.6 m using a split-spoon sampler. Vertical profiles of hydraulic conductivity were produced on the basis of grain-size analysis of the disturbed core samples. These results closely correlate with the vertical profile of horizontal hydraulic conductivity obtained by interpreting multi-level slug test responses using the modified SG model. The identification method was applied to interpret the response from 474 slug tests in 156 locations at the MSEA site. More than 60% of responses were oscillatory. The method produced a good match to experimental data for both oscillatory and monotonic responses using an automated curve matching procedure. The proposed method allowed us to drastically increase the efficiency of each well used for aquifer characterization and to process massive arrays of field data. Recommendations generalizing this experience to massive application of the proposed method are developed.Using the developed theory and modified Springer-Gelhar (SG) model, an identification method is proposed for estimating hydraulic conductivity from multi-level slug tests. The computerized algorithm calculates hydraulic conductivity from both monotonic and oscillatory well responses obtained using a double-packer system. Field verification of the method was performed at a specially designed fully penetrating well of 0.1-m diameter with a 10-m screen in a sand and gravel alluvial

  17. Rust Formation Mechanism on Low Alloy Steels after Exposure Test in High Cl− and High SOx Environment

    Science.gov (United States)

    Nishimura, Toshiyasu

    2017-01-01

    Exposure tests were performed on low alloy steels in high Cl− and high SOx environment, and the structure of the rust were analyzed by TEM (Transmission Electron Microscopy) and Raman Spectroscopy. In the exposure test site, the concentrations of Cl− and SOx were found to be high, which caused the corrosion of the steels. The conventional weathering steel (SMA: 0.6% Cr-0.4% Cu-Fe) showed higher corrosion resistance as compared to the carbon steel (SM), and Ni bearing steel exhibited the highest one. Raman spectroscopy showed that the inner rust of Ni bearing steel was mainly composed of α-FeOOH and spinel oxides. On the other hand, SMA contained β- and γ-FeOOH in inner rust, which increased the corrosion. TEM showed that nano-scale complex iron oxides containing Ni or Cr were formed in the rust on the low alloy steels, which suppressed the corrosion of steels in high Cl− and high SOx environment. PMID:28772560

  18. Rust Formation Mechanism on Low Alloy Steels after Exposure Test in High Cl− and High SOx Environmen

    Directory of Open Access Journals (Sweden)

    Toshiyasu Nishimura

    2017-02-01

    Full Text Available Exposure tests were performed on low alloy steels in high Cl− and high SOx environment, and the structure of the rust were analyzed by TEM (Transmission Electron Microscopy and Raman Spectroscopy. In the exposure test site, the concentrations of Cl− and SOx were found to be high, which caused the corrosion of the steels. The conventional weathering steel (SMA: 0.6% Cr-0.4% Cu-Fe showed higher corrosion resistance as compared to the carbon steel (SM, and Ni bearing steel exhibited the highest one. Raman spectroscopy showed that the inner rust of Ni bearing steel was mainly composed of α-FeOOH and spinel oxides. On the other hand, SMA contained β- and γ-FeOOH in inner rust, which increased the corrosion. TEM showed that nano-scale complex iron oxides containing Ni or Cr were formed in the rust on the low alloy steels, which suppressed the corrosion of steels in high Cl− and high SOx environment.

  19. Rust Formation Mechanism on Low Alloy Steels after Exposure Test in High Cl- and High SOx Environmen.

    Science.gov (United States)

    Nishimura, Toshiyasu

    2017-02-17

    Exposure tests were performed on low alloy steels in high Cl- and high SOx environment, and the structure of the rust were analyzed by TEM (Transmission Electron Microscopy) and Raman Spectroscopy. In the exposure test site, the concentrations of Cl- and SOx were found to be high, which caused the corrosion of the steels. The conventional weathering steel (SMA: 0.6% Cr-0.4% Cu-Fe) showed higher corrosion resistance as compared to the carbon steel (SM), and Ni bearing steel exhibited the highest one. Raman spectroscopy showed that the inner rust of Ni bearing steel was mainly composed of α-FeOOH and spinel oxides. On the other hand, SMA contained β- and γ-FeOOH in inner rust, which increased the corrosion. TEM showed that nano-scale complex iron oxides containing Ni or Cr were formed in the rust on the low alloy steels, which suppressed the corrosion of steels in high Cl- and high SOx environment.

  20. Geotechnical characterization through in situ and laboratory tests of several geological formations present in the route of the Future Fix Connection between Spain and Morocco through Gibraltar Strait

    International Nuclear Information System (INIS)

    Perucho Martinez, A.; Diez Torres, J. A.; Muniz Menendez, M.; Cano Linares, H.; Ruiz Fonticiella, J. M.

    2015-01-01

    CEDEX and SECEGSA (Sociedad Española para la Comunicación Fija a través del Estrecho de Gibraltar), Have been collaborating since a few decades ago to study different technical aspects related to the Fix Connection through the Gibraltar Strait, mainly in relation to the geological and geotechnical properties of the different formations present in the route. In order to do so, many studies of geotechnical characterization of materials, in situ and laboratory testing campaigns have been carried out. Furthermore, they have participated in some Expertise Committees carrying out some advice work related to studies performed by other organizations. This paper presents a brief description of the most relevant aspects of the main geological and geotechnical studies performed related to this Project of the Future Fix Connection and obtained through the study of SECEGSAs extensive data base. Moreover, it includes a synopsis of the geotechnical characterization carried out through in situ and laboratory tests on different Miocene and Eocene formations from the Algeciras Unit, present in the route of the future Fix Connection between Spain and gibraltar through the Gibraltar Strait. (Author)

  1. Analysis of a gas-phase partitioning tracer test conducted in an unsaturated fractured-clay formation.

    Science.gov (United States)

    Simon, Michelle A; Brusseau, Mark L

    2007-03-20

    The gas-phase partitioning tracer method was used to estimate non-aqueous phase liquid (NAPL), water, and air saturations in the vadose zone at a chlorinated-solvent contaminated field site in Tucson, AZ. The tracer test was conducted in a fractured-clay system that is the confining layer for the underlying regional aquifer. Three suites of three tracers were injected into wells located 14, 24, and 24 m from a single, central extraction well. The tracers comprised noble gases (traditionally thought to be nonsorbing), alkanes (primarily water partitioning), perfluorides (primarily NAPL partitioning), and halons (both NAPL and water partitioning). Observations of vacuum response were consistent with flow in a fractured system. The halon tracers exhibited the greatest amount of retardation, and helium and the perfluoride tracers the least. The alkane tracers were unexpectedly more retarded than the perfluoride tracers, indicating low NAPL saturations and high water saturations. An NAPL saturation of 0.01, water saturation of 0.215, and gas saturation of 0.775 was estimated based on analysis of the suite of tracers comprising helium, perfluoromethylcyclohexane and dibromodifluoromethane, which was considered to be the most robust set. The estimated saturations compare reasonably well to independently determined values.

  2. Predicted mineral melt formation by BCURA Coal Sample Bank coals: Variation with atmosphere and comparison with reported ash fusion test data

    Energy Technology Data Exchange (ETDEWEB)

    D. Thompson [University of Sheffield (United Kingdom). Department of Engineering Materials

    2010-08-15

    The thermodynamic equilibrium phases formed under ash fusion test and excess air combustion conditions by 30 coals of the BCURA Coal Sample Bank have been predicted from 1100 to 2000 K using the MTDATA computational suite and the MTOX database for silicate melts and associated phases. Predicted speciation and degree of melting varied widely from coal to coal. Melting under an ash fusion test atmosphere of CO{sub 2}:H{sub 2} 1:1 was essentially the same as under excess air combustion conditions for some coals, and markedly different for others. For those ashes which flowed below the fusion test maximum temperature of 1773 K flow coincided with 75-100% melting in most cases. Flow at low predicted melt formation (46%) for one coal cannot be attributed to any one cause. The difference between predicted fusion behaviours under excess air and fusion test atmospheres becomes greater with decreasing silica and alumina, and increasing iron, calcium and alkali metal content in the coal mineral. 22 refs., 7 figs., 3 tabs.

  3. In Situ XPS Chemical Analysis of MnSiO3 Copper Diffusion Barrier Layer Formation and Simultaneous Fabrication of Metal Oxide Semiconductor Electrical Test MOS Structures.

    Science.gov (United States)

    Byrne, Conor; Brennan, Barry; McCoy, Anthony P; Bogan, Justin; Brady, Anita; Hughes, Greg

    2016-02-03

    Copper/SiO2/Si metal-oxide-semiconductor (MOS) devices both with and without a MnSiO3 barrier layer at the Cu/SiO2 interface have been fabricated in an ultrahigh vacuum X-ray photoelectron spectroscopy (XPS) system, which allows interface chemical characterization of the barrier formation process to be directly correlated with electrical testing of barrier layer effectiveness. Capacitance voltage (CV) analysis, before and after tube furnace anneals of the fabricated MOS structures showed that the presence of the MnSiO3 barrier layer significantly improved electric stability of the device structures. Evidence of improved adhesion of the deposited copper layer to the MnSiO3 surface compared to the clean SiO2 surface was apparent both from tape tests and while probing the samples during electrical testing. Secondary ion mass spectroscopy (SIMS) depth profiling measurements of the MOS test structures reveal distinct differences of copper diffusion into the SiO2 dielectric layers following the thermal anneal depending on the presence of the MnSiO3 barrier layer.

  4. Scientific results from the deepened Lopra-1 borehole, Faroe Islands: Wire-line log-based stratigraphy of flood basalts from the Lopra-1/1A well, Faroe Islands

    Directory of Open Access Journals (Sweden)

    Boldreel, Lars O.

    2006-07-01

    Full Text Available The present study shows that it is possible to use conventional borehole logs to perform a detailed lithological/stratigraphical division of a column of subaerially extruded basalt. A stratigraphical division of the subaerial flood basalts penetrated by the Lopra-1/1A well has been carried out using new wire-line logging data measured in 1996 in the interval 200–2489 m depth. Resistivity data acquired in the interval 200–2178 m depth during 1981 after the initial drilling of the Lopra-1 well have also been incorporated. Eighty-six individual flow units, 18 compound flows and two dolerite dykes have been identified by combining the NPHI porosity, RHOB density, P-, S- and Stonely-sonic transit time, calliper and resistivity logs. Fifty-two sedimentary/tuffaceous layers have also been identified using the CGR and SGR gamma ray and potassium logs in combination with the aforementioned logs. Within the flow units, sonic velocity, density and resistivity are highest in the core where porosity is lowest. This relation is reversed in the uppermost and basal zones of the flow units. The sonic velocity in the core seems to be independent of the thickness of the flow unit. Porous zones seem abundant in some cores and the total section of cores containing porous zones constitutes more than 70% of the thickness of its flow unit, but where porous zones are absent the core makes up only roughly 50% of the thickness of the flow. It is suggested that the flow units with porous cores represent aa flows (88% of the flow units and the others pahoehoe flows (12% of the flow units.The log pattern of the flow units (crust, core and basal zone is similar to log patterns reported from other basalt plateaux. However the patterns in Lopra-1/1A show a larger variation than elsewhere,suggesting that the flow units are more complex vertically than previously thought. Statistical analysis of P-, S- and Stonely-waves, RHOB, NPHI, resistivity, gamma and calliper logs has

  5. Tests of star formation metrics in the low-metallicity galaxy NGC 5253 using ALMA observations of H30α line emission

    Science.gov (United States)

    Bendo, G. J.; Miura, R. E.; Espada, D.; Nakanishi, K.; Beswick, R. J.; D'Cruze, M. J.; Dickinson, C.; Fuller, G. A.

    2017-11-01

    We use Atacama Large Millimeter/submillimeter Array (ALMA) observations of H30α (231.90 GHz) emission from the low-metallicity dwarf galaxy NGC 5253 to measure the star formation rate (SFR) within the galaxy and to test the reliability of SFRs derived from other commonly used metrics. The H30α emission, which originates mainly from the central starburst, yields a photoionizing photon production rate of (1.9 ± 0.3) × 1052 s-1 and an SFR of 0.087 ± 0.013 M⊙ yr-1 based on conversions that account for the low metallicity of the galaxy and for stellar rotation. Among the other star formation metrics we examined, the SFR calculated from the total infrared flux was statistically equivalent to the values from the H30α data. The SFR based on a previously published version of the H α flux that was extinction corrected using Paα and Paβ lines was lower than but also statistically similar to the H30α value. The mid-infrared (22 μm) flux density and the composite star formation tracer based on H α and mid-infrared emission give SFRs that were significantly higher because the dust emission appears unusually hot compared to typical spiral galaxies. Conversely, the 70 and 160 μm flux densities yielded SFRs lower than the H30α value, although the SFRs from the 70 μm and H30α data were within 1σ-2σ of each other. While further analysis on a broader range of galaxies is needed, these results are instructive of the best and worst methods to use when measuring SFR in low-metallicity dwarf galaxies like NGC 5253.

  6. Testing geopressured geothermal reservoirs in existing wells: Detailed completion prognosis for geopressured-geothermal well of opportunity, prospect #7

    Energy Technology Data Exchange (ETDEWEB)

    Godchaux, Frank A.

    1981-06-01

    This book is a detailed prognosis covering the acquisition, completion, drilling, testing and abandonment of the Frank A. Godchaux, III, Well No. 1 under the Wells of Opportunity Program. The well is located approximately 12 miles southeast of the city of Abbeville, Louisiana. Eaton Operating Company proposes to test a section of the Planulina sand at a depth ranging from 15,584 to 15,692 feet. The reservoir pressure is estimated to be 14,480 psi and the temperature of the formation water is expected to be 298 F. The water salinity is calculated to be 75,000 ppm. The well is expected to produce 20,000 barrels of water per day with a gas content of 44 standard cubic feet pre barrel. The well was acquired from C and K Petroleu, Inc. on March 20, 1981. C and K abandoned the well at a total depth of 16,000 feet. The well has a 7-5/8 inches liner set at 13,387 feet. Eaton proposes to set 5-1/2 inch casing at 16,000 feet and produce the well through the casing using a 2-3/8 inch tubing string for wireline protection and for pressure control. A 4,600 foot saltwater disposal well will be drilled on the site and testing will be conducted similar to previous Eaton tests. The total estimated cost to perform the work is $2,959,000. An optional test from 14,905 to 15,006 feet may be performed after the original test and will require a workover with a rig on location to perform the plugback. The surface production equipment utilized on previous Eaton WOO tests will be utilized on this test. This equipment has worked satisfactorily and all parties involved in the testing are familiar with its operation. The Institute of Gas Technology and Mr. Don Clark will handle the sampling and testing and reservoir evaluation, respectively, as on the previous Eaton tests.

  7. Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Overview of scientific and technical program

    Science.gov (United States)

    Hunter, R.B.; Collett, T.S.; Boswell, R.; Anderson, B.J.; Digert, S.A.; Pospisil, G.; Baker, R.; Weeks, M.

    2011-01-01

    The Mount Elbert Gas Hydrate Stratigraphic Test Well was drilled within the Alaska North Slope (ANS) Milne Point Unit (MPU) from February 3 to 19, 2007. The well was conducted as part of a Cooperative Research Agreement (CRA) project co-sponsored since 2001 by BP Exploration (Alaska), Inc. (BPXA) and the U.S. Department of Energy (DOE) in collaboration with the U.S. Geological Survey (USGS) to help determine whether ANS gas hydrate can become a technically and commercially viable gas resource. Early in the effort, regional reservoir characterization and reservoir simulation modeling studies indicated that up to 0.34 trillion cubic meters (tcm; 12 trillion cubic feet, tcf) gas may be technically recoverable from 0.92 tcm (33 tcf) gas-in-place within the Eileen gas hydrate accumulation near industry infrastructure within ANS MPU, Prudhoe Bay Unit (PBU), and Kuparuk River Unit (KRU) areas. To further constrain these estimates and to enable the selection of a test site for further data acquisition, the USGS reprocessed and interpreted MPU 3D seismic data provided by BPXA to delineate 14 prospects containing significant highly-saturated gas hydrate-bearing sand reservoirs. The "Mount Elbert" site was selected to drill a stratigraphic test well to acquire a full suite of wireline log, core, and formation pressure test data. Drilling results and data interpretation confirmed pre-drill predictions and thus increased confidence in both the prospect interpretation methods and in the wider ANS gas hydrate resource estimates. The interpreted data from the Mount Elbert well provide insight into and reduce uncertainty of key gas hydrate-bearing reservoir properties, enable further refinement and validation of the numerical simulation of the production potential of both MPU and broader ANS gas hydrate resources, and help determine viability of potential field sites for future extended term production testing. Drilling and data acquisition operations demonstrated that gas hydrate

  8. First Results from the Dense Extragalactic GBT+ARGUS Survey (DEGAS): A Direct, Quantitative Test of the Role of Gas Density in Star Formation

    Science.gov (United States)

    Kepley, Amanda; Bigiel, Frank; Bolatto, Alberto; Church, Sarah; Cleary, Kieran; Frayer, David; Gallagher, Molly; Gundersen, Joshua; Harris, Andrew; Hughes, Annie; Jimenez-Donaire, Maria Jesus; Kessler, Sarah; Lee, Cheoljong; Leroy, Adam; Li, Jialu; Donovan Meyer, Jennifer; Rosolowsky, Erik; Sandstrom, Karin; Schinnener, Eva; Schruba, Andreas; Sieth, Matt; Usero, Antonio

    2018-01-01

    Gas density plays a central role in all modern theories of star formation. A key test of these theories involves quantifying the resolved gas density distribution and its relationship to star formation within a wide range of galactic environments. Until recently, this experiment has been difficult to perform owing to the faint nature of key molecular gas tracers like HCN and HCO+, but the superior sensitivity of modern millimeter instruments like ALMA and the IRAM 30m make these types of experiments feasible. In particular, the sensitivity and resolution provided by large aperture of the GBT combined with fast mapping speeds made possible by its new 16-pixel, 3mm focal plane array (Argus) make the GBT an almost-ideal instrument for this type of study. The Dense Extragalactic GBT+Argus Survey (DEGAS) will leverage these capabilities to perform the largest, resolved survey of molecular gas tracers in nearby galaxies, ultimately mapping a suite of four molecular gas tracers in the inner 2’ by 2’ of 36 nearby galaxies. When complete in 2020, DEGAS will be the largest resolved survey of dense molecular gas tracers in nearby galaxies. This talk will present early results from the first observations for this Green Bank Telescope large survey and highlight some exciting future possibilities for this survey.

  9. Predictions of long-term behavior of a large-volume pilot test for CO2 geological storage in a saline formation in the Central Valley, California

    Energy Technology Data Exchange (ETDEWEB)

    Doughty, Christine; Myer, Larry R.; Oldenburg, Curtis M.

    2008-11-01

    The long-term behavior of a CO{sub 2} plume injected into a deep saline formation is investigated, focusing on mechanisms that lead to plume stabilization. Key measures are plume migration distance and the time evolution of CO{sub 2} phase-partitioning, which are examined by developing a numerical model of the subsurface at a proposed power plant with CO{sub 2} capture in the San Joaquin Valley, California, where a large-volume pilot test of CO{sub 2} injection will be conducted. The numerical model simulates a four-year CO{sub 2} injection period and the subsequent evolution of the CO{sub 2} plume until it stabilizes. Sensitivity studies are carried out to investigate the effect of poorly constrained model parameters permeability, permeability anisotropy, and residual gas saturation.

  10. A Comparative Study on the Formation Mechanism of Wear Scars during the Partial and Full Scale Fretting Wear Tests of Spacer Grids

    International Nuclear Information System (INIS)

    Lee, Young Ho; Shin, Chang Hwan; Oh, Dong Seok; Kang, Heung Seok

    2012-01-01

    Fretting wear studies for evaluating the contact damages of nuclear fuel rods have been focused on the contact shape, rod motion, contact condition, environment, etc.. However, fretting wear mechanism was dramatically changed with slight variation of test variables such as test environments and contact shapes. For example, in an unlubricated condition, effects of wear debris and/or its layer on the fretting wear mechanism showed that the formation of a well-developed layer on the contact surfaces has a beneficial effect for decreasing a friction coefficient. Otherwise, a severe wear was happened due to a third body abrasion. In addition, in water lubrication condition, some of wear debris was remained on worn surface of fuel rod specimens at both sliding and impacting loading conditions. So, it is apparent that a wear rate of fuel rod specimen was easily accelerated by the third-body abrasion. This is because the restrained agglomeration behavior between generated wear particles results in rapid removal of wear debris and its layer. In case of contact shape effects, previous studies show that wear debris are easily trapped between contact surfaces and its debris layer was well developed in a localized area especially in a concave spring rather than a convex spring shape. Consequently, localized wear was happened at both ends of a concave spring and center region of a convex spring. So, it is useful for determining the fretting wear resistance of spacer gird spring and dimple by using part unit in the various lubricated conditions. It is well known that the fretting wear phenomenon of nuclear fuel rod is originated from a flow-induced vibration (FIV) due to the rapid primary coolant. This means that both rod vibration and debris removal behavior were affected by flow fields around the contact regions between fuel rod and spring/dimple. However, all most of the fretting tests were performed by simulating rod vibrating motions such as axial vibration, conservative rod

  11. Hydrothermal Alteration of Glass from Underground Nuclear Tests: Formation and Transport of Pu-clay Colloids at the Nevada National Security Site

    Energy Technology Data Exchange (ETDEWEB)

    Zavarin, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhao, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Joseph, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Begg, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Boggs, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dai, Z. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kersting, A. B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-05-27

    The testing of nuclear weapons at the Nevada National Security Site (NNSS), formerly the Nevada Test Site (NTS), has led to the deposition of substantial quantities of plutonium into the environment. Approximately 2.8 metric tons (3.1×104 TBq) of Pu were deposited in the NNSS subsurface as a result of underground nuclear testing. While 3H is the most abundant anthropogenic radionuclide deposited in the NNSS subsurface (4.7×106 TBq), plutonium is the most abundant from a molar standpoint. The only radioactive elements in greater molar abundance are the naturally occurring K, Th, and U isotopes. 239Pu and 240Pu represent the majority of alpha-emitting Pu isotopes. The extreme temperatures associated with underground nuclear tests and the refractory nature of Pu results in most of the Pu (98%) being sequestered in melted rock, referred to as nuclear melt glass (Iaea, 1998). As a result, Pu release to groundwater is controlled, in large part, by the leaching (or dissolution) of nuclear melt glass over time. The factors affecting glass dissolution rates have been studied extensively. The dissolution of Pu-containing borosilicate nuclear waste glasses at 90ºC has been shown to lead to the formation of dioctahedral smectite colloids. Colloid-facilitated transport of Pu at the NNSS has been observed. Recent groundwater samples collected from a number of contaminated wells have yielded a wide range of Pu concentrations from 0.00022 to 2.0 Bq/L. While Pu concentrations tend to fall below the Maximum Contaminant Level (MCL) established by the Environmental Protection Agency (EPA) for drinking water (0.56 Bq/L), we do not yet understand what factors limit the Pu concentration or its transport behavior. To quantify the upper limit of Pu concentrations produced as a result of melt glass dissolution and determine the nature of colloids and Pu associations, we performed a 3 year nuclear melt glass dissolution experiment

  12. Analysis of core samples from the BPXA-DOE-USGS Mount Elbert gas hydrate stratigraphic test well: Insights into core disturbance and handling

    Energy Technology Data Exchange (ETDEWEB)

    Kneafsey, Timothy J.; Lu, Hailong; Winters, William; Boswell, Ray; Hunter, Robert; Collett, Timothy S.

    2009-09-01

    Collecting and preserving undamaged core samples containing gas hydrates from depth is difficult because of the pressure and temperature changes encountered upon retrieval. Hydrate-bearing core samples were collected at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well in February 2007. Coring was performed while using a custom oil-based drilling mud, and the cores were retrieved by a wireline. The samples were characterized and subsampled at the surface under ambient winter arctic conditions. Samples thought to be hydrate bearing were preserved either by immersion in liquid nitrogen (LN), or by storage under methane pressure at ambient arctic conditions, and later depressurized and immersed in LN. Eleven core samples from hydrate-bearing zones were scanned using x-ray computed tomography to examine core structure and homogeneity. Features observed include radial fractures, spalling-type fractures, and reduced density near the periphery. These features were induced during sample collection, handling, and preservation. Isotopic analysis of the methane from hydrate in an initially LN-preserved core and a pressure-preserved core indicate that secondary hydrate formation occurred throughout the pressurized core, whereas none occurred in the LN-preserved core, however no hydrate was found near the periphery of the LN-preserved core. To replicate some aspects of the preservation methods, natural and laboratory-made saturated porous media samples were frozen in a variety of ways, with radial fractures observed in some LN-frozen sands, and needle-like ice crystals forming in slowly frozen clay-rich sediments. Suggestions for hydrate-bearing core preservation are presented.

  13. Examination of core samples from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Effects of retrieval and preservation

    Energy Technology Data Exchange (ETDEWEB)

    Kneafsey, T.J.; Liu, T.J. H.; Winters, W.; Boswell, R.; Hunter, R.; Collett, T.S.

    2011-06-01

    Collecting and preserving undamaged core samples containing gas hydrates from depth is difficult because of the pressure and temperature changes encountered upon retrieval. Hydrate-bearing core samples were collected at the BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well in February 2007. Coring was performed while using a custom oil-based drilling mud, and the cores were retrieved by a wireline. The samples were characterized and subsampled at the surface under ambient winter arctic conditions. Samples thought to be hydrate bearing were preserved either by immersion in liquid nitrogen (LN), or by storage under methane pressure at ambient arctic conditions, and later depressurized and immersed in LN. Eleven core samples from hydrate-bearing zones were scanned using x-ray computed tomography to examine core structure and homogeneity. Features observed include radial fractures, spalling-type fractures, and reduced density near the periphery. These features were induced during sample collection, handling, and preservation. Isotopic analysis of the methane from hydrate in an initially LN-preserved core and a pressure-preserved core indicate that secondary hydrate formation occurred throughout the pressurized core, whereas none occurred in the LN-preserved core, however no hydrate was found near the periphery of the LN-preserved core. To replicate some aspects of the preservation methods, natural and laboratory-made saturated porous media samples were frozen in a variety of ways, with radial fractures observed in some LN-frozen sands, and needle-like ice crystals forming in slowly frozen clay-rich sediments. Suggestions for hydrate-bearing core preservation are presented.

  14. The formation of early settled villages and the emergence of leadership: A test of three theoretical models in the Rio Ilave, Lake Titicaca Basin, southern Peru

    Science.gov (United States)

    Craig, Nathan Mcdonald

    Despite obvious necessities for understanding later developments in the region, Preceramic cultures in the Titicaca Basin are poorly understood due to lacking empirical data. This dissertation focuses on examination of two processes occurring in the Rio Ilave drainage during the Late 5000--3100 B.C.E. (6000--4400 B.P.) and Terminal 3100--1500 B.C.E. Archaic (4400--3200 B.P.): the formation of settled villages and the emergence of leadership. These processes are tested against theoretical predictions derived from: population resource imbalance, human behavioral ecology, and agency theories. Resource imbalance theory predicts appearance of density dependent adaptive problems prior to major cultural transformations. Human behavioral ecology predicts increased dietary diversity and incorporation of greater processing costs occuring coincidentally with reduced residential mobility. Symbolic mate value advertising is a predicted leadership strategy. Agency theory predicts internal sources of social tension, potentially independent of external forces, as primary causes of cultural change. Feast hosting and the formation political economy are expected to be central to both social processes investigated from this perspective. Local paleoclimatic proxies suggest aridity from ca 4000--2000 B.C.E. Reanalysis of pedestrian survey data indicate population growth during the Late Archaic. Excavation and ground penetrating radar survey at Pirco and Jiskairumoko demonstrate reduced residential mobility and increased evidence for social differentiation appearing during the Late Archaic's (before 3000 B.C.E.) end. New cultural patterns include: pithouses, more groundstone, internal storage, costly non-local artifacts, domesticated plants and animals, costly grave goods, and use of ochre in symbolic contexts. No clear cut evidence for inter-community promotional feasting was identified but some finds suggest intra-community alliance feasts. By the end of the Terminal Archaic ca. 1500 B

  15. Front-of-pack nutrition labelling: testing effectiveness of different nutrition labelling formats front-of-pack in four European countries.

    Science.gov (United States)

    Feunekes, Gerda I J; Gortemaker, Ilse A; Willems, Astrid A; Lion, René; van den Kommer, Marcelle

    2008-01-01

    In two studies, the impact of eight front-of-pack nutrition labelling formats that differed in complexity was investigated across four European countries. In total 1630 men and women (18-55 yrs) were recruited from Internet panels in the United Kingdom, Germany, Italy and the Netherlands for study 1 and 776 in Italy and the United Kingdom for study 2. Participants evaluated several products (healthier and less healthy variants of the same product category) with a front-of-pack nutrition labelling format. The first study evaluated different labelling formats on consumer friendliness (comprehension, liking and credibility) and the second study measured the effect of the different labelling formats on decision-making (usage intention and process time). The results indicated minor differences in consumer friendliness and usage intention between simpler (such as Healthier Choice Tick, Smileys and Stars) and more complex front-of-pack nutrition labelling formats (such as Multiple Traffic Light, Wheel of Health and GDA scores). Endorsement by national and international health organisations strongly increased the labelling formats' credibility. Participants needed significantly less time to evaluate simpler front-of-pack labelling compared to the more complex labelling format. Thus simpler front-of-pack labelling formats seem more appropriate in a shopping environment where quick decisions are made.

  16. Stellar formation

    CERN Document Server

    Reddish, V C

    1978-01-01

    Stellar Formation brings together knowledge about the formation of stars. In seeking to determine the conditions necessary for star formation, this book examines questions such as how, where, and why stars form, and at what rate and with what properties. This text also considers whether the formation of a star is an accident or an integral part of the physical properties of matter. This book consists of 13 chapters divided into two sections and begins with an overview of theories that explain star formation as well as the state of knowledge of star formation in comparison to stellar structure

  17. FST-formation of cryogenic layer inside spherical shells of HiPER-class. Results of mathematical modeling and mock-ups testing

    International Nuclear Information System (INIS)

    Belolipetskiy, A.A.; Lalinina, E.A.; Panina, L.V.

    2010-01-01

    Complete text of publication follows. Current stage in the IFE research has passed to a closing stage: creation of the experimental reactor and realization of electric power generation. HiPER is a proposed European High Power laser Energy Research facility dedicated to demonstrating the feasibility of laser driven fusion for IFE reactor. The HiPER facility operation requires the formation and delivery of spherical shock ignition cryogenic targets with a rate of several Hz. The targets must be free-standing, or un-mounted. At the Lebedev Physical Institute (LPI), significant progress has been made in the technology development based on rapid fuel layering inside moving free-standing targets which refers to as FST layering method. It allows one to form cryogenic targets with a required rate. In this report, we present the results of a feasibility study on high rep-rate formation of HiPER-class targets by FST. We consider two types of the baseline target for shock ignition. The first one (BT-2) is a 2.094-mm diameter compact polymer shell with a 3 μm thick wall. The solid layer thickness is 211 μm. The second (BT-2a) consists of a 2.046-mm diameter compact polymer shell (3 μm thick also) having a DT-filled CH foam (70 μm) on its inner surface, and then a 120 μm thick solid layer of pure DT. The work addresses the physical concept, and the modeling results of the major stages of FST technologies for different shell materials: Filling stage optimization (computation): optimal filling of a target batch up to ∼ 1000 atm at 300 K requires minimizing the diffusion fill time due to using the ramp filling method for both BT-2 and BT-2a; Depressurization stage optimization (computation and experiments): it requires providing the shell container leak proofness during the process of its cooling down to a depressurization temperature. This allows one to fulfill the technical requirements on the risks minimization associated with the damage of the HiPER-class targets

  18. Investigation of CO2 plume behavior for a large-scale pilot test of geologic carbon storage in a saline formation

    Energy Technology Data Exchange (ETDEWEB)

    Doughty, C.

    2009-04-01

    The hydrodynamic behavior of carbon dioxide (CO{sub 2}) injected into a deep saline formation is investigated, focusing on trapping mechanisms that lead to CO{sub 2} plume stabilization. A numerical model of the subsurface at a proposed power plant with CO{sub 2} capture is developed to simulate a planned pilot test, in which 1,000,000 metric tons of CO{sub 2} is injected over a four-year period, and the subsequent evolution of the CO{sub 2} plume for hundreds of years. Key measures are plume migration distance and the time evolution of the partitioning of CO{sub 2} between dissolved, immobile free-phase, and mobile free-phase forms. Model results indicate that the injected CO{sub 2} plume is effectively immobilized at 25 years. At that time, 38% of the CO{sub 2} is in dissolved form, 59% is immobile free phase, and 3% is mobile free phase. The plume footprint is roughly elliptical, and extends much farther up-dip of the injection well than down-dip. The pressure increase extends far beyond the plume footprint, but the pressure response decreases rapidly with distance from the injection well, and decays rapidly in time once injection ceases. Sensitivity studies that were carried out to investigate the effect of poorly constrained model parameters permeability, permeability anisotropy, and residual CO{sub 2} saturation indicate that small changes in properties can have a large impact on plume evolution, causing significant trade-offs between different trapping mechanisms.

  19. Wireline equalization using pulse-width modulation

    NARCIS (Netherlands)

    Schrader, J.H.R.; Klumperink, Eric A.M.; Visschers, J.L.; Nauta, Bram

    2006-01-01

    Abstract-High-speed data links over copper cables can be effectively equalized using pulse-width modulation (PWM) pre-emphasis. This provides an alternative to the usual 2-tap FIR filters. The use of PWM pre-emphasis allows a channel loss at the Nyquist frequency of ~30dB, compared to ~20dB for a

  20. Soil formation.

    NARCIS (Netherlands)

    Breemen, van N.; Buurman, P.

    1998-01-01

    Soil Formation deals with qualitative and quantitative aspects of soil formation (or pedogenesis) and the underlying chemical, biological, and physical processes. The starting point of the text is the process - and not soil classification. Effects of weathering and new formation of minerals,

  1. WWC Review of the Report "Interactive Online Learning on Campus: Testing MOOCs and Other Platforms in Hybrid Formats in the University System of Maryland." What Works Clearinghouse Single Study Review

    Science.gov (United States)

    What Works Clearinghouse, 2015

    2015-01-01

    In the 2014 study, "Interactive Online Learning on Campus: Testing MOOCs and Other Platforms in Hybrid Formats in the University System of Maryland," researchers examined the impact of using hybrid forms of interactive online learning in seven undergraduate courses across seven universities in Maryland. Hybrid forms of interactive online…

  2. Testing the Role of p21 Activated Kinases in Schwannoma Formation Using a Novel Genetically Engineered Murine Model that Closely Phenocopies Human NF2 Disease

    Science.gov (United States)

    2017-06-01

    Kinases in Schwannoma Formation Using a Novel Genetically Engineered Murine Model that Closely Phenocopies Human NF2 Disease The views, opinions and...Role of p21 Activated Kinases in Schwannoma Formation Using a Novel Genetically Engineered Murine Model that Closely Phenocopies Human NF2 Disease Form...autosomal dominant genetic disease characterized by benign schwannomas that grow on the cranial and spinal nerves. While technically benign, the tumors are

  3. Preliminary evaluation of the shale gas prospectivity of the Lower Cretaceous Pearsall Formation in the onshore Gulf Coast region, United States

    Science.gov (United States)

    Enomoto, Catherine B.; Scott, Kristina; Valentine, Brett J.; Hackley, Paul C.; Dennen, Kristin; Lohr, Celeste D.

    2012-01-01

    Recent work by the U.S. Geological Survey indicated that the Lower Cretaceous Pearsall Formation contains an estimated mean undiscovered, technically recoverable unconventional gas resource of 8.8 trillion cubic ft in the Maverick Basin, South Texas. Cumulative gas production from horizontal wells in the core area of the emerging play has exceeded 5 billion cubic ft since 2008. However, very little information is available to characterize the Pearsall Formation as an unconventional gas resource beyond the Maverick Basin in the greater Gulf Coast region. Therefore, this reconnaissance study examines spatial distribution, thickness, organic richness and thermal maturity of the Pearsall Formation in the onshore U.S. Gulf states using wireline logs and drill cuttings sample analysis. Spontaneous potential and resistivity curves of approximately forty wireline logs from wells in five Gulf Coast states were correlated to ascertain the thickness of the Pearsall Formation and delineate its three members: Pine Island Shale, James Limestone or Cow Creek Limestone, and Bexar Shale, in ascending stratigraphic order. In Florida and Alabama the Pearsall Formation is up to about 300 ft thick; in Mississippi, Louisiana, Arkansas, and East Texas, thickness is up to as much as 800 ft. Drill cuttings sampled from 11 wells at depths ranging from 4600 to 19,600 feet subsurface indicate increasingly oxygenated depositional environments (predominance of red shale) towards the eastern part of the basin. Cuttings vary widely in lithology but indicate interbedded clastics and limestones throughout the Pearsall Formation, consistent with previous regional studies. Organic petrographic and geochemical analyses of 17 cutting samples in the Pearsall Formation indicate a wide range in thermal maturity, from immature (0.43% Ro [vitrinite reflectance]) in paleo-high structural locations to the peak oil window (0.99% Ro) in the eastern portion of the Gulf Coast Basin. This is in contrast to dry gas

  4. Reservoir Characterization for CO2 Sequestration: Assessing the Potential of the Devonian Carbonate Nisku Formation of Central Alberta Caractérisation de réservoir en vue du stockage géologique de CO2 : évaluation du potentiel offert par les carbonates dévoniens de la formation de Nisku, en Alberta central

    Directory of Open Access Journals (Sweden)

    Eisinger C.

    2011-02-01

    Full Text Available The Wabamun Lake area of Central Alberta, Canada includes several large CO2 point source emitters, collectively producing more than 30 Mt annually. Previous studies established that deep saline aquifers beneath the Wabamun Lake area have good potential for the large-scale injection and storage of CO2. This study reports on the characterization of the Devonian carbonate Nisku Formation for evaluation as a CO2 repository. Major challenges for characterization included sparse well and seismic data, poor quality flow tests, and few modern measurements. Wireline porosity measurements were present in only one-third of the wells, so porosity and flow capacity (permeability-thickness were estimated using wireline electrical measurements. The Archie cementation factor appears to vary between 2 and 3, creating uncertainty when predicting porosity using the electrical measurements; however, high-porosity zones could be identified. The electrically-based flow capacity predictions showed more favorable values using a correlation with core than the relation based on drill stem and production tests. This behavior is expected, since the flow test flow capacities are less influenced by local occurrences of very permeable vuggy and moldic rocks. Facies distributions were modeled using both pixel and object methods. The object models, using dimensions obtained from satellite imaging of modern day environments, gave results that were more consistent with the geological understanding of the Nisku and showed greater large-scale connectivity than the pixel model. Predicted volumes show considerable storage capacity in the Nisku, but flow simulations suggest injection capacities are below an initial 20 Mt/year target using vertical wells. More elaborate well designs, including fracture stimulation or multi-lateral wells may allow this goal to be reached or surpassed. Plusieurs gros émetteurs de CO2, totalisant 30 Mt annuels, sont localisés dans la région du Lac

  5. Stratigraphic and structural data for the Conasauga Group and the Rome Formation on the Copper Creek fault block near Oak Ridge, Tennessee: preliminary results from test borehole ORNL-JOY No. 2

    International Nuclear Information System (INIS)

    Haase, C.S.; Walls, E.C.; Farmer, C.D.

    1985-06-01

    To resolve long-standing problems with the stratigraphy of the Conasauga Group and the Rome Formation on the Copper Creek fault block near Oak Ridge National Laboratory (ORNL), an 828.5-m-deep test borehole was drilled. Continuous rock core was recovered from the 17.7- to 828.5-m-deep interval; temperature, caliper, neutron, gamma-ray, and acoustic (velocity and televiewer) logs were obtained. The Conasauga Group at the study site is 572.4 m thick and comprises six formations that are - in descending stratigraphic order - Maynardville Limestone (98.8 m), Nolichucky Shale (167.9 m), Maryville Limestone (141.1 m), Rogersville Shale (39.6 m), Rutledge Limestone (30.8 m), and Pumpkin Valley Shale (94.2 m). The formations are lithologically complex, ranging from clastics that consist of shales, mudstones, and siltstones to carbonates that consist of micrites, wackestones, packstones, and conglomerates. The Rome Formation is 188.1 m thick and consists of variably bedded mudstones, siltstones, and sandstones. The Rome Formation thickness represents 88.1 m of relatively undeformed section and 100.0 m of highly deformed, jumbled, and partially repeated section. The bottom of the Rome Formation is marked by a tectonic disconformity that occurs within a 46-m-thick, intensely deformed interval caused by motion along the Copper Creek fault. Results from this study establish the stratigraphy and the lithology of the Conasauga Group and the Rome Formation near ORNL and, for the first time, allow for the unambiguous correlation of cores and geophysical logs from boreholes elsewhere in the ORNL vicinity. 45 refs., 26 figs., 2 tabs

  6. Age differences in concept formation.

    Science.gov (United States)

    Hartman, Marilyn; Stratton-Salib, Brea C

    2007-02-01

    In order to identify the source of age-related deficits in concept formation, older and younger adults completed a new Concept Matching Test, tests of selective attention, and the Sorting Test, a standardized test of concept formation (Delis, Kaplan, & Kramer, 2001). Older adults showed intact concept identification, the ability to generate abstract concepts from stimulus features, but age differences were observed when irrelevant features were present. In addition, selective attention, but not concept identification ability, predicted age-related declines on the Sorting Test. Thus, reduced concept formation in older adults may stem from declines in abilities other than the capacity for abstraction.

  7. Combination Susceptibility Testing of Common Antimicrobials in Vitro and the Effects of Sub-MIC of Antimicrobials on Staphylococcus aureus Biofilm Formation

    Directory of Open Access Journals (Sweden)

    Bing Yang

    2017-11-01

    Full Text Available The current study was conducted to evaluate the antibacterial combination efficacies, and whether the sub-inhibitory concentrations (sub-MIC of antibiotics can influent on the biofilm formation of S. aureus. The minimum inhibitory concentration (MIC of common antibacterial drugs was determined in vitro against clinical isolates of Staphylococcus aureus (S. aureus, Escherichia coli (E. coli, and Pasteurella multocida (P. multocida alone and in combination with each other by using the broth microdilution method and the checkerboard micro-dilution method analyzed with the fractional inhibitory concentration index (FICI, respectively. Regarding these results, antibacterial drug combinations were categorized as synergistic, interacting, antagonistic and indifferent, and most of the results were consistent with the previous reports. Additionally, the effects of sub-MIC of seven antimicrobials (kanamycin, acetylisovaleryltylosin tartrate, enrofloxacin, lincomycin, colistin sulfate, berberine, and clarithromycin on S. aureus biofilm formation were determined via crystal violet staining, scanning electron microscopy (SEM and real-time PCR. Our results demonstrate that all antibiotics, except acetylisovaleryltylosin tartrate, effectively reduced the S. aureus biofilm formation. In addition, real-time reverse transcriptase PCR was used to analyze the relative expression levels of S. aureus biofilm-related genes such as sarA, fnbA, rbf, lrgA, cidA, and eno after the treatment at sub-MIC with all of the six antimicrobials. All antibiotics significantly inhibited the expression of these biofilm-related genes except for acetylisovaleryltylosin tartrate, which efficiently up-regulated these transcripts. These results provide the theoretical parameters for the selection of effective antimicrobial combinations in clinical therapy and demonstrate how to correctly use antibiotics at sub-MIC as preventive drugs.

  8. Overview of pressure-drawdown production-test results for the JAPEX/JNOC/GSC et al. Mallik 5L-38 gas hydrate production research well

    Energy Technology Data Exchange (ETDEWEB)

    Hancock, S.H.; Carle, D.; Weatherill, B. [APA Petroleum Engineering Ltd., Calgary, AB (Canada); Dallimore, S.R. [Geological Survey of Canada, Pacific Geoscience Centre, Sidney, BC (Canada); Collett, T.S. [United States Geological Survey, Denver, CO (United States); Satoh, T. [Japan Petroleum Exploration Co. Ltd., Tokyo (Japan); Inoue, T. [Japan National Oil Corp., Chiba (Japan)

    2005-07-01

    Schlumberger's Modular Dynamic Tester (MDT) cased hole wireline tool was used during a pressure drawdown production test at the Mallik 5L-38 well to successfully test separate hydrate intervals as well as free gas and water zones. This paper provided an overview of the pressure-drawdown testing operations and results. Preliminary analysis of the gas hydrate porous-media response was also presented. Two important phenomena were observed during the hydrate tests: (1) free gas was produced on a steady state basis following the initial clean-up flow of water, and (2) the pressure response upon shut-in displayed porous media effects and indicated both flow contribution and pressure effects beyond the surface area of the hydrate open to the wellbore. Since analytical pressure transient analysis software cannot incorporate dynamic reservoir parameters, conventional analytical techniques were used to evaluate the test data.

  9. The test-retest reliability of the latent construct of executive function depends on whether tasks are represented as formative or reflective indicators.

    Science.gov (United States)

    Willoughby, Michael T; Kuhn, Laura J; Blair, Clancy B; Samek, Anya; List, John A

    2017-10-01

    This study investigates the test-retest reliability of a battery of executive function (EF) tasks with a specific interest in testing whether the method that is used to create a battery-wide score would result in differences in the apparent test-retest reliability of children's performance. A total of 188 4-year-olds completed a battery of computerized EF tasks twice across a period of approximately two weeks. Two different approaches were used to create a score that indexed children's overall performance on the battery-i.e., (1) the mean score of all completed tasks and (2) a factor score estimate which used confirmatory factor analysis (CFA). Pearson and intra-class correlations were used to investigate the test-retest reliability of individual EF tasks, as well as an overall battery score. Consistent with previous studies, the test-retest reliability of individual tasks was modest (rs ≈ .60). The test-retest reliability of the overall battery scores differed depending on the scoring approach (r mean  = .72; r factor_ score  = .99). It is concluded that the children's performance on individual EF tasks exhibit modest levels of test-retest reliability. This underscores the importance of administering multiple tasks and aggregating performance across these tasks in order to improve precision of measurement. However, the specific strategy that is used has a large impact on the apparent test-retest reliability of the overall score. These results replicate our earlier findings and provide additional cautionary evidence against the routine use of factor analytic approaches for representing individual performance across a battery of EF tasks.

  10. Environmental Assessment: Geothermal Energy Geopressure Subprogram. Gulf Coast Well Drilling and Testing Activity (Frio, Wilcox, and Tuscaloosa Formations, Texas and Louisiana)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-09-01

    The Department of Energy (DOE) has initiated a program to evaluate the feasibility of developing the geothermal-geopressured energy resources of the Louisiana-Texas Gulf Coast. As part of this effort, DOE is contracting for the drilling of design wells to define the nature and extent of the geopressure resource. At each of several sites, one deep well (4000-6400 m) will be drilled and flow tested. One or more shallow wells will also be drilled to dispose of geopressured brines. Each site will require about 2 ha (5 acres) of land. Construction and initial flow testing will take approximately one year. If initial flow testing is successful, a continuous one-year duration flow test will take place at a rate of up to 6400 m{sup 3} (40,000 bbl) per day. Extensive tests will be conducted on the physical and chemical composition of the fluids, on their temperature and flow rate, on fluid disposal techniques, and on the reliability and performance of equipment. Each project will require a maximum of three years to complete drilling, testing, and site restoration.

  11. Copper Test

    Science.gov (United States)

    ... and Iron-binding Capacity (TIBC, UIBC) Trichomonas Testing Triglycerides Troponin Tryptase Tumor Markers Uric Acid Urinalysis Urine ... play a role in the regulation of iron metabolism , formation of connective tissue , energy production at the ...

  12. Testing common classical LTE and NLTE model atmosphere and line-formation codes for quantitative spectroscopy of early-type stars

    International Nuclear Information System (INIS)

    Przybilla, Norbert; Nieva, Maria-Fernanda; Butler, Keith

    2011-01-01

    It is generally accepted that the atmospheres of cool/lukewarm stars of spectral types A and later are described well by LTE model atmospheres, while the O-type stars require a detailed treatment of NLTE effects. Here model atmosphere structures, spectral energy distributions and synthetic spectra computed with ATLAS9/SYNTHE and TLUSTY/SYNSPEC, and results from a hybrid method combining LTE atmospheres and NLTE line-formation with DETAIL/SURFACE are compared. Their ability to reproduce observations for effective temperatures between 15 000 and 35 000 K are verified. Strengths and weaknesses of the different approaches are identified. Recommendations are made as to how to improve the models in order to derive unbiased stellar parameters and chemical abundances in future applications, with special emphasis on Gaia science.

  13. THE TAOS PROJECT: UPPER BOUNDS ON THE POPULATION OF SMALL KUIPER BELT OBJECTS AND TESTS OF MODELS OF FORMATION AND EVOLUTION OF THE OUTER SOLAR SYSTEM

    International Nuclear Information System (INIS)

    Bianco, F. B.; Zhang, Z.-W.; King, S.-K.; Wang, J.-H.; Lee, T.; Lin, H.-C.; Lehner, M. J.; Mondal, S.; Giammarco, J.; Holman, M. J.; Alcock, C.; Coehlo, N. K.; Axelrod, T.; Byun, Y.-I.; Kim, D.-W.; Chen, W. P.; Cook, K. H.; Dave, R.; De Pater, I.; Lissauer, J. J.

    2010-01-01

    We have analyzed the first 3.75 years of data from the Taiwanese American Occultation Survey (TAOS). TAOS monitors bright stars to search for occultations by Kuiper Belt objects (KBOs). This data set comprises 5 x 10 5 star hours of multi-telescope photometric data taken at 4 or 5 Hz. No events consistent with KBO occultations were found in this data set. We compute the number of events expected for the Kuiper Belt formation and evolution models of Pan and Sari, Kenyon and Bromley, Benavidez and Campo Bagatin, and Fraser. A comparison with the upper limits we derive from our data constrains the parameter space of these models. This is the first detailed comparison of models of the KBO size distribution with data from an occultation survey. Our results suggest that the KBO population is composed of objects with low internal strength and that planetary migration played a role in the shaping of the size distribution.

  14. Understanding the formation and influence of attitudes in patients' treatment choices for lower back pain: Testing the benefits of a hybrid choice model approach

    DEFF Research Database (Denmark)

    Kløjgaard, Mirja Elisabeth; Hess, S.

    2014-01-01

    A growing number of studies across different fields are making use of a new class of choice models, labelled variably as hybrid model structures or integrated choice and latent variable models, and incorporating the role of attitudes in decision making. To date, this technique has not been used...... in health economics. The present paper looks at the formation of such attitudes and their role in patients treatment choices in the context of low back pain. We use stated choice data collected from a sample of 561 patients with 348 respondents referred to a regional spine centre in Middelfart, Denmark...... in spring/summer 2012. We show how the hybrid model structure is able to make a link between attitudinal questions and treatment choices, and also explains variation of these attitudes across key socio-demographic groups. However, we also show how, in this case, only a small share of the overall...

  15. Star formation

    International Nuclear Information System (INIS)

    Woodward, P.R.

    1978-01-01

    Theoretical models of star formation are discussed beginning with the earliest stages and ending in the formation of rotating, self-gravitating disks or rings. First a model of the implosion of very diffuse gas clouds is presented which relies upon a shock at the edge of a galactic spiral arm to drive the implosion. Second, models are presented for the formation of a second generation of massive stars in such a cloud once a first generation has formed. These models rely on the ionizing radiation from massive stars or on the supernova shocks produced when these stars explode. Finally, calculations of the gravitational collapse of rotating clouds are discussed with special focus on the question of whether rotating disks or rings are the result of such a collapse. 65 references

  16. Galaxy Formation

    DEFF Research Database (Denmark)

    Sparre, Martin

    Galaxy formation is an enormously complex discipline due to the many physical processes that play a role in shaping galaxies. The objective of this thesis is to study galaxy formation with two different approaches: First, numerical simulations are used to study the structure of dark matter and how...... galaxies form stars throughout the history of the Universe, and secondly it is shown that observations of gamma-ray bursts (GRBs) can be used to probe galaxies with active star formation in the early Universe. A conclusion from the hydrodynamical simulations is that the galaxies from the stateof...... is important, since it helps constraining chemical evolution models at high redshift. A new project studying how the population of galaxies hosting GRBs relate to other galaxy population is outlined in the conclusion of this thesis. The core of this project will be to quantify how the stellar mass function...

  17. Star formation

    Energy Technology Data Exchange (ETDEWEB)

    Woodward, P.R.

    1978-09-27

    Theoretical models of star formation are discussed beginning with the earliest stages and ending in the formation of rotating, self-gravitating disks or rings. First a model of the implosion of very diffuse gas clouds is presented which relies upon a shock at the edge of a galactic spiral arm to drive the implosion. Second, models are presented for the formation of a second generation of massive stars in such a cloud once a first generation has formed. These models rely on the ionizing radiation from massive stars or on the supernova shocks produced when these stars explode. Finally, calculations of the gravitational collapse of rotating clouds are discussed with special focus on the question of whether rotating disks or rings are the result of such a collapse. 65 references.

  18. School-Based HIV/STD Testing Behaviors and Motivations among Black and Hispanic Teen MSM: Results from a Formative Evaluation

    Science.gov (United States)

    Morris, Elana; Topete, Pablo; Rasberry, Catherine N.; Lesesne, Catherine A.; Kroupa, Elizabeth; Carver, Lisa

    2016-01-01

    Background: This evaluation explores experiences with, and motivations for, human immunodeficiency virus (HIV) and sexually transmitted disease (STD) testing among black and Hispanic school-aged young men who have sex with men (YMSM). Methods: Participants were recruited at community-based organizations that serve YMSM in New York City,…

  19. Paleomagnetic data for Siberia and Baltica in the context of testing some geodynamic models of the formation of the Central Asian Mobile Belt

    Science.gov (United States)

    Shatsillo, A. V.; Kuznetsov, N. B.; Dronov, A. V.

    2017-09-01

    The synthesis of the paleomagnetic data for the Siberian (Siberia) and East European (Baltica) platforms shows that since the Early Paleozoic they could have experienced coherent movements as a part of consolidated continental agglomeration (a composite continent), which also includes the Arctida continent. Based on the paleomagnetic data, the relative positions of the Siberia and Baltica during the Ordovician is reconstructed, and a series of paleogeographical reconstructions describing the drift of the composite continent is suggested. The results of the lithologic-facial analysis of the sedimentation settings within the Ordovician basins of the Siberian and East European platforms and paleoclimatic markers are consistent with the suggested configuration and paleogeographical position of the composite continent. The suggested reconstructions and the ages of detrital zircons from the Early Paleozoic complexes of the platform margins and some objects of the Central Asian Mobile Belt (CAMB) reasonably well agree with the hypothesis (Sengör et al., 1993) which interprets the formation of the structure of CAMB Paleozoides as a result of the evolution of the island arc stretching along the margins of Siberia and Baltica.

  20. Comparative evaluation of practical functionality of rapid test format kits for detection of Escherichia coli O157:H7 on lettuce and leafy greens.

    Science.gov (United States)

    D'Lima, C B; Suslow, T V

    2009-12-01

    Multistate outbreaks of Escherichia coli O157:H7 infection in 2005 and 2006 associated with fresh and especially minimally processed produce greatly escalated the application of rapid pathogen detection systems to safety management in this food category. Pathogen testing was rapidly integrated into preharvest qualification for field lots, incoming raw produce, or final product. The raw produce and final product were incorporated into test-and-hold programs, typically within a 10-h time frame. To enhance consumer safety and provide guidance for the industry, an assessment of selected kits in comparison to a culture-based method was undertaken. Four primary kits were compared: the Neogen Reveal, SDI RapidChek, BioControl GDS O157, and Qualicon BAX O157 MP. Nine different leafy greens were freshly harvested and inoculated with a five-isolate mixture of E. coli O157:H7 at 10 CFU/25 g of sample, and cultures were enriched following the specified protocol. The PCR method was most consistent for identifying the presence of the inoculated pathogen in the shortest period of time. For the red-pigmented leafy vegetables red butter lettuce, curly endive, red lettuce, and lollo rosa, 13, 38, 88, and 100% false-negative results, respectively, were obtained with the immunoassays, but PCR detection was minimally affected. Immunoassays were negatively affected by delays in achieving critical threshold populations during the allowed enrichment period. Leafy green type, temperature abuse, and preharvest environment were unlikely to affect the results of PCR-based kits. Findings strongly suggest that product testing systems using 8-h detection cutoffs may give false-negative results. These issues become very important in high-throughput testing and retest protocols for presumptive pathogen-positive lots of produce.

  1. CB1 receptors in the formation of the different phases of memory-related processes in the inhibitory avoidance test in mice.

    Science.gov (United States)

    Kruk-Slomka, Marta; Biala, Grażyna

    2016-03-15

    The endocannabinoid system, through the cannabinoid type 1 (CB1) and 2 (CB2) receptors modulates many physiological functions, including different aspects of memory-related processes. The aim of the present experiments was to explore the role of the endocannabinoid system, through CB1 receptors in the different stages of short-term (acquisition, retention and retrieval) and long-term (acquisition, consolidation and retrieval) memory-related responses, using the inhibitory avoidance (IA) test in mice. Our results revealed that an acute injection of oleamide (10 and 20mg/kg), a CB1 receptor agonist, impairs the short-term or/and long-term acquisition, retention/consolidation, retrieval memory and learning processes in the IA test in mice. In turn, in this test an acute injection of AM 251 (1 and 3mg/kg), a CB1 receptor antagonist, improves the short-term or/and long-term memory stages, described above. Moreover, this memory impairment induced by effective dose of oleamide (20mg/kg) is reversed by non-effective dose of AM 251 (0.25mg/kg) in the IA task, which proves the selectivity of oleamide to CB1 receptors and confirms that the CB1 receptor-related mechanism is one of the possible mechanisms, responsible for memory and learning responses. Obtained results provide clear evidence that the endocannabinoid system, through CB1 receptors, participates in the different stages of short- and long-term memory-related behavior. This knowledge may open in the future new possibilities for the development of CB-based therapies, especially for memory impairment human disorders. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Estimation of the hydraulic parameters of a confined geologic formation from slug test in fully penetrating well using a complete quasi-steady flow model in a forward and in an inverse optimal estimation procedure

    Science.gov (United States)

    Rozos, Evangelos; Akylas, Evangelos; Koussis, Antonis D.

    2013-04-01

    Slug tests offer a fast and inexpensive means of estimating the hydraulic parameters of a geologic formation, and are very well suited for contaminated site assessment because no water is essentially withdrawn. In the great majority of slug tests performed in wells fully penetrating confined geologic formations, and for over-damped conditions, the response data are evaluated with the transient-flow model of Cooper et al. (1967) when the radial hydraulic conductivity Kr and the coefficient of specific storage Ss are to be estimated. That particular analytical solution, however, is computationally involved and awkward to use. Thus, groundwater professionals often use a few pre-prepared type-curves to fit the data by a rough matching procedure, visually or computationally. On the other hand, the method of Hvorslev (1951), which assumes the flow to be quasi-steady, is much simpler but yields only Kr-estimates. Koussis and Akylas (2012) have derived a complete quasi-steady flow model that includes a storage balance inside the aquifer and allows estimating both Kr and Ss, through matching of the well response data to a (dimensionless) type-curve. That model approximates the model of Cooper et al. closely and has the practical advantage that its solution type-curves are generated very simply, even using an electronic spreadsheet. Thus, an optimal fit of data by a type-curve can be readily embedded in an exhaustive search. That forward procedure, however, is semi-automated; it involves repeated computation of the quasi-steady flow solution, until finding an optimal pair of Kr and Ss values, according to some formal criterion of optimality, or visually. In addition, we have developed a fully automated inverse procedure for estimating the optimal hydraulic formation parameters Kr and Ss. We test and compare these two parameter estimation methods for the slug test and discuss their strengths and weaknesses. Cooper, H. H., Jr., J. D. Bredehoeft and I. S. Papadopulos. 1967

  3. Optimization of cell-based assays to quantify the anti-inflammatory/allergic potential of test substances in 96-well format.

    Science.gov (United States)

    Chandrasekaran, C V; Edwin Jothie, R; Kapoor, Preeti; Gupta, Anumita; Agarwal, Amit

    2011-06-01

    There is an insistent need for robust, reliable, and optimized assays for screening novel drugs targeting the inflammatory/allergic markers. The present study describes about the optimization of eight cell-based assays utilizing mammalian cell lines in 96-well format for quantifying anti-inflammatory/allergic drug candidates. We estimated the inhibitory response of reference compounds: 1400 W dihydrochloride on LPS-induced NO release, celecoxib on LPS-induced PGE(2) production and dexamethasone on LPS-induced pro-inflammatory cytokines IL-1 beta, IL-6, and TNF-alpha production by J774A.1 murine macrophages. Response of acetylsalicylic acid and celecoxib was studied on A23187-induced TXB(2) production; captopril on A23187-stimulated LTB(4) production by HL-60 cells. Effect of ketotifen fumarate was evaluated on A23187-elicited histamine release by RBL-2H3 cells. Each experiment was repeated twice to assess the reproducibility and suitability of the assays by determining appropriate statistical tools viz. %CV, S/B and Z' factor. 1400 W dihydrochloride was capable of inhibiting LPS-induced NO levels (IC(50) = 10.7 μM). Dexamethasone attenuated LPS-induced IL-1 beta (IC(50) = 70 nM), IL-6 (IC(50) = 58 nM) and TNF-alpha (IC(50) = 44 nM) release, whereas celecoxib, a specific COX-2 inhibitor showed marked reduction in LPS-induced PGE(2) (IC(50) = 23 nM) production. Captopril (IC(50) = 48 μM) and ketotifen fumarate (IC(50) = 36.4 μM) demonstrated potent inhibitory effect against A23187-stimulated LTB(4) and histamine levels, respectively. Both acetylsalicylic acid (IC(50) = 5.5 μM) and celecoxib (IC(50) = 7.9 nM) exhibited concentration-dependent decrease in TXB(2) production. Results for all the cell assays from two experiments showed a Z' factor varying from 0.30 to 0.99; the S/B ratio ranged from 2.39 to 24.92; %CV ranged between 1.52 and 20.14. The results proclaim that these cell-based assays can act as ideal tools for screening new anti

  4. Advanced reservoir characterization in the Antelope Shale to establish the viability of CO{sub 2} enhanced oil recovery in California`s Monterey Formation siliceous shales. Annual report, February 12, 1996--February 11, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Toronyi, R.M.

    1997-12-01

    The Buena Vista Hills field is located about 25 miles southwest of Bakersfield, in Kern County, California, about two miles north of the city of Taft, and five miles south of the Elk Hills field. The Antelope Shale zone was discovered at the Buena Vista Hills field in 1952, and has since been under primary production. Little research was done to improve the completion techniques during the development phase in the 1950s, so most of the wells are completed with about 1000 ft of slotted liner. The proposed pilot consists of four existing producers on 20 acre spacing with a new 10 acre infill well drilled as the pilot CO{sub 2} injector. Most of the reservoir characterization of the first phase of the project will be performed using data collected in the pilot pattern wells. This is the first annual report of the project. It covers the period February 12, 1996 to February 11, 1997. During this period the Chevron Murvale 653Z-26B well was drilled in Section 26-T31S/R23E in the Buena Vista Hills field, Kern County, California. The Monterey Formation equivalent Brown and Antelope Shales were continuously cored, the zone was logged with several different kinds of wireline logs, and the well was cased to a total depth of 4907 ft. Core recovery was 99.5%. Core analyses that have been performed include Dean Stark porosity, permeability and fluid saturations, field wettability, anelastic strain recovery, spectral core gamma, profile permeametry, and photographic imaging. Wireline log analysis includes mineral-based error minimization (ELAN), NMR T2 processing, and dipole shear wave anisotropy. A shear wave vertical seismic profile was acquired after casing was set and processing is nearly complete.

  5. Cement Formation

    DEFF Research Database (Denmark)

    Telschow, Samira; Jappe Frandsen, Flemming; Theisen, Kirsten

    2012-01-01

    Cement production has been subject to several technological changes, each of which requires detailed knowledge about the high multiplicity of processes, especially the high temperature process involved in the rotary kiln. This article gives an introduction to the topic of cement, including...... an overview of cement production, selected cement properties, and clinker phase relations. An extended summary of laboratory-scale investigations on clinkerization reactions, the most important reactions in cement production, is provided. Clinker formations by solid state reactions, solid−liquid and liquid...

  6. Digtets formater

    DEFF Research Database (Denmark)

    Schmidt, Michael Kallesøe; Rasmussen, Krista Stinne Greve; Skriver, Svend

    2017-01-01

    definition of text and work can be supplemented by a hermeneutical dimension, thus taking various versions of works and the influence of their respective media (blog, book etc.) on the percipient into account. In connection with the theoretical considerations, a handful of recent works by Lea Marie...... Løppenthin, Olga Ravn, Mikkel Thykier, Caspar Eric, and Simon Grotrian are discussed. By using the format as a point of departure rather than applying a more conventional practice of close reading, the authors argue for a broad-spectred approach to literary analysis which focuses on aspects of the conception...

  7. Galaxy Formation

    CERN Document Server

    Longair, Malcolm S

    2008-01-01

    This second edition of Galaxy Formation is an up-to-date text on astrophysical cosmology, expounding the structure of the classical cosmological models from a contemporary viewpoint. This forms the background to a detailed study of the origin of structure and galaxies in the Universe. The derivations of many of the most important results are derived by simple physical arguments which illuminate the results of more advanced treatments. A very wide range of observational data is brought to bear upon these problems, including the most recent results from WMAP, the Hubble Space Telescope, galaxy surveys like the Sloan Digital Sky Survey and the 2dF Galaxy Redshift Survey, studies of Type 1a supernovae, and many other observations.

  8. Terrigenous sediment-dominated reef platform infilling: an unexpected precursor to reef island formation and a test of the reef platform size-island age model in the Pacific

    Science.gov (United States)

    Perry, CT; Kench, PS; Smithers, SG; Riegl, BR; Gulliver, P.; Daniells, JJ

    2017-09-01

    Low-lying coral reef islands are considered highly vulnerable to climate change, necessitating an improved understanding of when and why they form, and how the timing of formation varies within and among regions. Several testable models have been proposed that explain inter-regional variability as a function of sea-level history and, more recently, a reef platform size model has been proposed from the Maldives (central Indian Ocean) to explain intra-regional (intra-atoll) variability. Here we present chronostratigraphic data from Pipon Island, northern Great Barrier Reef (GBR), enabling us to test the applicability of existing regional island evolution models, and the platform size control hypothesis in a Pacific context. We show that reef platform infilling occurred rapidly ( 4-5 mm yr-1) under a "bucket-fill" type scenario. Unusually, this infilling was dominated by terrigenous sedimentation, with platform filling and subsequent reef flat formation complete by 5000 calibrated years BP (cal BP). Reef flat exposure as sea levels slowly fell post highstand facilitated a shift towards intertidal and subaerial-dominated sedimentation. Our data suggest, however, a lag of 1500 yr before island initiation (at 3200 cal BP), i.e. later than that reported from smaller and more evolutionarily mature reef platforms in the region. Our data thus support: (1) the hypothesis that platform size acts to influence the timing of platform filling and subsequent island development at intra-regional scales; and (2) the hypothesis that the low wooded islands of the northern GBR conform to a model of island formation above an elevated reef flat under falling sea levels.

  9. Relevance and acceptability of using the Quantiferon gold test (QGIT) to screen CD4 blood draws for latent TB infection among PLHIV in South Africa: formative qualitative research findings from the TEKO trial.

    Science.gov (United States)

    Kerrigan, Deanna; Tudor, Carrie; Motlhaoleng, Katlego; Lebina, Limakatso; Qomfu, Cokiswa; Variava, Ebrahim; Chon, Sandy; Martinson, Neil; Golub, Jonathan E

    2018-04-16

    Tuberculosis (TB) is the leading cause of mortality among people living with HIV (PLHIV), despite the availability of effective preventive therapy. The TEKO trial is assessing the impact of using a blood test, Quantiferon-TB Gold In-Tube Test (QGIT), to screen for latent TB compared to the Tuberculin Screening Test (TST) among PLHIV in South Africa. Fifty-six qualitative interviews were conducted with PLHIV and clinical providers participating in the TEKO trial. We explored TB screening, diagnosis, and treatment guidelines and processes and the use of the QGIT to screen for latent TB infection at the time of CD4 blood draw. Thematic content analysis was conducted. Considerable variability in TB screening procedures was documented due to lack of personnel and clarity regarding current national TB guidelines for PLHIV. Few clinics had started using the TST per national guidelines and many patients had never heard of isoniazid preventive therapy (IPT). Nearly all participants supported the idea of latent TB screening using routine blood drawn for CD4 counts. Findings indicate that screening for latent TB infection using QGIT from blood drawn for CD4 counts among PLHIV is an acceptable approach to increase latent TB detection given the challenges associated with ensuring systematic latent TB screening in overburdened public clinics. The results presented here were from formative research related to the TEKO trial (Identifier NCT02119130 , registered 10 April 2014).

  10. Investigation of Methane Hydrate Formation in a Recirculating Flow Loop: Modeling of the Kinetics and Tests of Efficiency of Chemical Additives on Hydrate Inhibition Étude de la formation de l'hydrate de méthane dans une conduite de recirculation : modélisation de la cinétique et tests d'efficacité d'additifs chimiques inhibiteurs d'hydrates de gaz

    Directory of Open Access Journals (Sweden)

    Peytavy J. L.

    2006-12-01

    Full Text Available Gas hydrates can be formed when light gases, such as the components of natural gas, come into contact with water under particular conditions of temperature and pressure. These solid compounds give rise to problems in natural gas and oil industry because they can plug pipelines and process equipment. To prevent hydrate formation methanol and glycols are commonly and extensively used as inhibitors. Today, the thermodynamic equilibria of hydrate formation are well known, but the kinetics of gas hydrate formation and growth has to be studied in order to find means of controlling these processes and to explore the mechanisms for hydrate formation that follows non equilibrium laws. The present work deals with the kinetics of methane hydrate formation studied in a laboratory loop where the liquid blend saturated with methane is circulated up to a pressure of 75 bar. Pressure is maintained at a constant value during experimental runs by means of methane gas make-up. First the effects of pressure (35-75 bar, liquid velocity (0. 5-3 m/s, liquid cooling temperature ramp (2-15°C/h, and liquid hydrocarbon amount (0-96%, on hydrate formation kinetics are investigated. Then a new method is proposed to predict firstly the thermodynamic conditions (pressure and temperature at the maximum values of the growth rate of methane hydrate and secondly the methane hydrate growth rate. A good agreement is found between calculated and experimental data. Finally the evaluation of the efficiency of some kinetic additives and some surfactants developed to avoid either nucleation or crystal growth and agglomeration of methane hydrates is tested based on the proposed experimental procedure. Les hydrates de gaz des composés légers du gaz naturel se forment lorsque ceux-ci entrent en contact avec l'eau dans certaines conditions de température et de pression. Ces composés solides sont nuisibles pour les industries gazière et pétrolière car des bouchons solides peuvent

  11. Depositional environments and stratigraphic architecture of the Late Cretaceous Milk River and Eagle formations, southern Alberta and north-central Montana: relationships to shallow biogenic gas

    Energy Technology Data Exchange (ETDEWEB)

    Payenberg, T. H. D. [Adelaide University, National Centre for Petroleum Geology and Geophysics, SA (Australia); Braman, D. R. [Royal Tyrell Museum of Palaeontology, Drumheller, AB (Canada); Miall, A. D. [Toronto University, Dept. of Geology, ON (Canada)

    2003-06-01

    The Milk River and Eagle formations in southern Alberta and north-central Montana form the core of the first Upper Cretaceous clastic wedge in this part of the Western Interior Foreland Basin. The wedge is a host for shallow biogenic gas in both Canada and the United States. Through a series of detailed sedimentology, palynology and facies models, this paper interprets the depositional environments and stratigraphic architecture during the Santonian and Campanian along the paleo shoreline in these two regions. Seven areas were chosen for study; one in southern Alberta in and around Writing-on-Stone Provincial Park, and six in north-central Montana along the Missouri River and its tributaries. Borehole data were used to get an overall sense of the thickness of the formations in each area. To obtain sub-surface data five cores from the Bearpaw Mountains area were logged, and wireline logs from 2760 wells were integrated into the study. Results of the study are discussed in considerable detail, providing justification for predicting the potential existence for more unconventional reservoirs between the Bearpaw Mountains and the southern Alberta Milk River Gas Pool. 44 refs., 11 figs.

  12. Using the AD12-ICT rapid-format test to detect Wuchereria bancrofti circulating antigens in comparison to Og4C3-ELISA and nucleopore membrane filtration and microscopy techniques.

    Science.gov (United States)

    El-Moamly, Amal Abdul-Rasheed; El-Sweify, Mohamed Aly; Hafez, Mohamad Abdul

    2012-09-01

    Lymphatic filariasis (LF) continues to be a major source of permanent disability and an impediment to socio-economic development in 73 countries where more than 1 billion people are at risk and over 120 millions are infected. The global drive to eliminate LF necessitates an increasing demand for valid, reliable and rapid diagnostic tests. This study aimed to assess the performance of the AD12 rapid format immunochromatographic test (ICT) to detect Wuchereria bancrofti circulating antigens, against the combined gold standard: TropBio Og4C3-ELISA (enzyme-linked immunosorbent assay) which detects circulating filarial antigen (CFA) and the nucleopore membrane filtration and microscopic examination. This prospective case-control study involved 647 asymptomatic migrant workers from filariasis-endemic countries. Of these specimens, 32 were positive for microfilaremia using the membrane filtration and microscopy, 142 positive by ELISA (of which 32 had microfilaremia), and 128 positive by the ICT (of which 31 had microfilaremia). The performance of the ICT was calculated against 32 true-positive and 90 true-negative cases. For the detection of CFA, the ICT had a sensitivity of 97% (95% confidence interval [CI] 91-103), specificity 100% (95% CI 100-100), Positive Predictive Value (PPV) 100% (95% CI 100-100), Negative Predictive Value (NPV) 99% (95% CI 97-101); and the total accuracy of the test was 99% (95% CI 98-101). The agreement between ICT and ELISA in detecting W. bancrofti antigens was excellent (kappa = 0.934; p = 0.000). In conclusion, the AD12-ICT test for the detection of W. bancrofti-CFA was sensitive and specific and comparable to the performance of ELISA. The ICT would be a useful additional test to facilitate the proposed strategies for control and elimination of LF. Because it is rapid, simple to perform, and does not require the use of special equipment, the ICT may be most appropriate in screening programs and in monitoring the possible risk of introducing

  13. Sourceless formation evaluation. An LWD solution providing density and neutron measurements without the use of radioisotopes

    Energy Technology Data Exchange (ETDEWEB)

    Griffiths, R.; Reichel, N. [Schlumberger, Sungai Buloh (Malaysia)

    2013-08-01

    For many years the industry has been searching for a way to eliminate the logistical difficulties and risk associated with deployment of radioisotopes for formation evaluation. The traditional gamma-gamma density (GGD) measurement uses the scattering of 662-keV gamma rays from a 137Cs radioisotopic source, with a 30.17-year half-life, to determine formation density. The traditional neutron measurement uses an Am-Be source emitting neutrons with an energy around 4 MeV, with a half-life of 432 years. Both these radioisotopic sources pose health, security, and environmental risks. Pulsed-neutron generators have been used in the industry for several decades in wireline tools and more recently in logging-while-drilling tools. These generators produce 14-MeV neutrons, many of which interact with the nuclei in the formation. Elastic collisions allow a neutron porosity measurement to be derived, which has been available to the industry since 2005. Inelastic interactions are typically followed by the emission of a variety of high-energy gamma rays. Similar to the case of the GGD measurement, the transport and attenuation of these gamma rays is a strong function of the formation density. However, the gamma-ray source is now distributed over a volume within the formation, where gamma rays have been induced by neutron interactions and the source can no longer be considered to be a point as in the case of a radioisotopic source. In addition, the extent of the induced source region depends on the transport of the fast neutrons from the source to the point of gamma-ray production. Even though the physics is more complex, it is possible to measure the formation density if the fast neutron transport is taken into account when deriving the density answer. This paper briefly reviews the physics underlying the sourceless neutron porosity and recently introduced neutron-gamma density (SNGD) measurement, demonstrates how they can be used in traditional workflows and illustrates their

  14. Planetesimal formation starts at the snow line

    OpenAIRE

    Drążkowska, J; Alibert, Y

    2017-01-01

    Context. The formation stage of planetesimals represents a major gap in our understanding of the planet formation process. Late-stage planet accretion models typically make arbitrary assumptions about planetesimal and pebble distribution, while dust evolution models predict that planetesimal formation is only possible at some orbital distances. Aims. We wish to test the importance of the water snow line in triggering the formation of the first planetesimals during the gas-rich phase of a p...

  15. Planetesimal formation starts at the snow line

    OpenAIRE

    Drazkowska, Joanna; Alibert, Yann

    2017-01-01

    Planetesimal formation stage represents a major gap in our understanding of the planet formation process. The late-stage planet accretion models typically make arbitrary assumptions about planetesimals and pebbles distribution while the dust evolution models predict that planetesimal formation is only possible at some orbital distances. We want to test the importance of water snow line for triggering formation of the first planetesimals during the gas-rich phase of protoplanetary disk, when c...

  16. Geological & Geophysical findings from seismic, well log and core data for marine gas hydrate deposits at the 1st offshore methane hydrate production test site in the eastern Nankai Trough, offshore Japan: An overview

    Science.gov (United States)

    Fujii, T.; Noguchi, S.; Takayama, T.; Suzuki, K.; Yamamoto, K.

    2012-12-01

    In order to evaluate productivity of gas from marine gas hydrate by the depressurization method, Japan Oil, Gas and Metals National Corporation is planning to conduct a full-scale production test in early 2013 at the AT1 site in the north slope of Daini-Atsumi Knoll in the eastern Nankai Trough, Japan. The test location was determined using the combination of detailed 3D seismic reflection pattern analysis, high-density velocity analysis, and P-impedance inversion analysis, which were calibrated using well log data obtained in 2004. At the AT1 site, one production well (AT1-P) and two monitoring wells (AT1-MC and MT1) were drilled from February to March 2012, followed by 1 coring well (AT1-C) from June to July 2012. An extensive logging program with logging while drilling (LWD) and wireline-logging tools, such as GeoVISION (resistivity image), EcoScope (neutron/density porosity, mineral spectroscopy etc.), SonicScanner (Advanced Sonic tool), CMR/ProVISION (Nuclear Magnetic Resonance Tools), XPT (formation pressure, fluid mobility), and IsolationScanner (ultrasonic cement evaluation tools) was conducted at AT1-MC well to evaluate physical reservoir properties of gas hydrate-bearing sediments, to determine production test interval in 2013, and to evaluate cement bonding. Methane hydrate concentrated zone (MHCZ) confirmed by the well logging at AT1-MC was thin turbidites (tens of centimeters to few meters) with 60 m of gross thickness, which is composed of lobe type sequences in the upper part of it and channel sand sequences in the lower part. The gross thickness of MHCZ in the well is thicker than previous wells in 2004 (A1, 45 m) located around 150 m northeast, indicating that the prediction given by seismic inversion analysis was reasonable. Well-to-well correlation between AT1-MC and MT1 wells within 40 m distance exhibited that lateral continuity of these sand layers (upper part of reservoir) are fairly good, which representing ideal reservoir for the production

  17. The Systematic Medical Appraisal, Referral and Treatment (SMART Mental Health Project: Development and Testing of Electronic Decision Support System and Formative Research to Understand Perceptions about Mental Health in Rural India.

    Directory of Open Access Journals (Sweden)

    Pallab K Maulik

    Full Text Available Common mental disorders (CMD such as depression, suicidal risk and emotional/medically unexplained complaints affect a large number of people in India, but few receive appropriate care. Key reasons for this include few trained mental health professionals and stigma associated with mental health. A potential approach to address poor access to care is by training village healthcare workers in providing basic mental health care, and harnessing India's vast mobile network to support such workers using mobile-based applications. We propose an intervention to implement such an approach that incorporates the use of mobile-based electronic decision support systems (EDSS to provide mental health services for CMD, combined with a community-based anti-stigma campaign. This will be implemented and evaluated across 42 villages in Andhra Pradesh, a south Indian state. This paper discusses the development and testing of the EDSS, and the formative research that informed the anti-stigma campaign.The development of the EDSS used an iterative process that was validated against clinical diagnosis. A mixed methods approach tested the user acceptability of the EDSS. Focus group discussions and in-depth interviews provided community-level perceptions about mental health. This study involved 3 villages and one primary health centre.The EDSS application was found to be acceptable, but some modifications were needed. The community lacked adequate knowledge about CMD and its treatment and there was stigma associated with mental illness. Faith and traditional healers were considered to be important mental health service providers.A number of barriers and facilitators were identified in implementing the intervention analysed in a framework using Andersen's behavioural model of health services use.The findings assisted with refining the intervention prior to large-scale implementation and evaluation.

  18. CALIBRATION AND TESTING OF SONIC STIMULATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Roger Turpening; Wayne Pennington; Christopher Schmidt; Sean Trisch

    2005-03-01

    In conjunction with Baker Atlas Inc. Michigan Technological University devised a system capable of recording the earth motion and pressure due to downhole and surface seismic sources. The essential elements of the system are (1) a borehole test site that will remain constant and is available all the time and for any length of time, (2) a downhole sonde that will itself remain constant and, because of its downhole digitization feature, does not require the wireline or surface recording components to remain constant, and (3) a set of procedures that ensures that the amplitude and frequency parameters of a wide range of sources can be compared with confidence. This system was used to record four seismic sources, three downhole sources and one surface source. A single activation of each of the downhole sources was not seen on time traces above the ambient noise, however, one sweep of the surface source, a small vertical vibrator, was easily seen in a time trace. One of the downhole sources was seen by means of a spike in its spectrum and a second downhole source was clearly seen after correlation and stacking. The surface vibrator produced a peak to peak particle motion signal of approximately 4.5 x 10{sup -5} cm/sec and a peak to peak pressure of approx. 2.5 x 10{sup -7} microPascals at a depth of 1,485 ft. Theoretical advances were made with our partner, Dr. Igor Beresnev at Iowa State University. A theory has been developed to account for the behavior of oil ganglia trapped in pore throats, and their ultimate release through the additional incremental pressure associated with sonic stimulation.

  19. Calibration and Testing of Sonic Stimulation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Roger M. Turpening; Wayne D.Pennington

    2005-03-31

    In conjunction with Baker Atlas Inc. Michigan Technological University devised a system capable of recording the earth motion and pressure due to downhole and surface seismic sources. The essential elements of the system are 1) a borehole test site that will remain constant and is available all the time and for any length of time, 2) a downhole sonde that will itself remain constant and, because of its downhole digitization feature, does not require the wireline or surface recording components to remain constant, and 3) a set of procedures that ensures that the amplitude and frequency parameters of a wide range of sources can be compared with confidence. This system was used to record four seismic sources, three downhole sources and one surface source. A single activation of each of the downhole sources was not seen on time traces above the ambient noise, however, one sweep of the surface source, a small vertical vibrator, was easily seen in a time trace. One of the downhole sources was seen by means of a spike in its spectrum and a second downhole source was clearly seen after correlation and stacking. The surface vibrator produced a peak to peak particle motion signal of approximately 4.5 X 10-5 cm/sec and a peak to peak pressure of approx. 2.5 X 10-7 microPascals at a depth of 1,485 ft. Theoretical advances were made with our partner, Dr. I. Beresnev at Iowa State University. A theory has been developed to account for the behavior of oil ganglia trapped in pore throats, and their ultimate release through the additional incremental pressure associated with sonic stimulation.

  20. Mars’ peculiar formation

    Science.gov (United States)

    Woo, Man Yin; Brasser, Ramon; Mojzsis, Stephen; Matsumura, Soko; Ida, Shigeru

    2017-10-01

    The formation of the terrestrial planets is a long standing problem. Mars probably holds the key to solving this mystery because of the substantial amount of data gathered from space missions, martian meteorites and its obvious differences when compared to Earth. Recent elemental and isotopic abundances suggest that Mars’ composition is significantly different from that of Earth. Therefore, Mars should have accreted most of its mass in a region different from Earth’s, most likely further from the Sun. These compositional differences should be explained with planet formation models. We tested the probability of producing a Mars analogue that is compositionally different from Earth in two popular planet formation models: the Grand Tack model with tack locations of 1.5 or 2 AU for Jupiter; and the Classical model in which all the terrestrial planets formed near their current locations. We performed a high number of N-body simulations with initial conditions that are either equal-mass planetary embryos or a semi-analytical approach to oligarch growth. Our results show that the probability of producing a Mars analogue which matches the current mass and orbit of Mars is at most 9% but reduces to mostly about 1% when it mainly accretes its mass further than Mars’ current position of 1.5 AU. Strangely enough, in the Grand Tack model the number of Mars analogues produced is independent of the initial number of planet embryos. Hence, we conclude that both planet formation models have difficulties to explain the observed compositional differences between Earth and Mars.

  1. Close Formation Flight Control

    National Research Council Canada - National Science Library

    Proud, Andrew

    1999-01-01

    ... in the formation's drag is achieved. A controller, i.e., a formation-hold autopilot for the wing aircraft, is designed such that the formation's geometry is maintained in the face of lead aircraft maneuvers...

  2. Formate Formation and Formate Conversion in Biological Fuels Production

    Directory of Open Access Journals (Sweden)

    Bryan R. Crable

    2011-01-01

    Full Text Available Biomethanation is a mature technology for fuel production. Fourth generation biofuels research will focus on sequestering CO2 and providing carbon-neutral or carbon-negative strategies to cope with dwindling fossil fuel supplies and environmental impact. Formate is an important intermediate in the methanogenic breakdown of complex organic material and serves as an important precursor for biological fuels production in the form of methane, hydrogen, and potentially methanol. Formate is produced by either CoA-dependent cleavage of pyruvate or enzymatic reduction of CO2 in an NADH- or ferredoxin-dependent manner. Formate is consumed through oxidation to CO2 and H2 or can be further reduced via the Wood-Ljungdahl pathway for carbon fixation or industrially for the production of methanol. Here, we review the enzymes involved in the interconversion of formate and discuss potential applications for biofuels production.

  3. Formate Formation and Formate Conversion in Biological Fuels Production

    OpenAIRE

    Crable, Bryan R.; Plugge, Caroline M.; McInerney, Michael J.; Stams, Alfons J. M.

    2011-01-01

    Biomethanation is a mature technology for fuel production. Fourth generation biofuels research will focus on sequestering CO2 and providing carbon-neutral or carbon-negative strategies to cope with dwindling fossil fuel supplies and environmental impact. Formate is an important intermediate in the methanogenic breakdown of complex organic material and serves as an important precursor for biological fuels production in the form of methane, hydrogen, and potentially methanol. Formate is...

  4. Screening Tests for Birth Defects

    Science.gov (United States)

    ... Advocacy For Patients About ACOG Screening Tests for Birth Defects Home For Patients Search FAQs Screening Tests ... FAQ165, April 2014 PDF Format Screening Tests for Birth Defects Pregnancy What is a birth defect? What ...

  5. Common communication format for bibliographic data exchange

    Energy Technology Data Exchange (ETDEWEB)

    Gove, N.B.; Hughes, T.E.; Matiushin, G.D.; Turtanov, N.V.

    1981-01-01

    Development of a format for use in the exchange of machine-readable bibliographic information between the USA and the USSR is discussed. ISO standards will be used, where relevant, for carrier format and character codes. Extensions to UNIMARC have been proposed for content designators to accommodate the needs of abstracting and indexing services. A common listing format, including a transliteration scheme, has been developed for test and check purposes.

  6. prediction of diagenesis and reservoir quality using wireline logs

    African Journals Online (AJOL)

    E. Mazouz

    2017-05-01

    abreviated in French: TAGS – Trias Argilo-Gréseux Supérieur) seem rare comparatively with those on TAGI. (Lower Triassic, Ladinian to early Carnian); this less importance is probably due to the reduced extent of TAGS compared ...

  7. DEPLOYMENT OF VOIP ON WIRELINE NETWORK USING OPNET

    African Journals Online (AJOL)

    EKPAH

    ABSTRACT. Voice over Internet Protocol is a revolutionary technology which has become a key topic in both the growing Internet industry ... The long-hyped integration of voice and data on a single network is finally becoming reality. .... heavily utilized links. As a good upgrade rule, a topology change is kept to minimum and.

  8. Convergence of wireless, wireline, and photonics next generation networks

    CERN Document Server

    Iniewski, Krzysztof

    2010-01-01

    Filled with illustrations and practical examples from industry, this book provides a brief but comprehensive introduction to the next-generation wireless networks that will soon replace more traditional wired technologies. Written by a mixture of top industrial experts and key academic professors, it is the only book available that covers both wireless networks (such as wireless local area and personal area networks) and optical networks (such as long-haul and metropolitan networks) in one volume. It gives engineers and engineering students the necessary knowledge to meet challenges of next-ge

  9. Using Electrical Wireline Logs For Aquifer Characterization In Parts ...

    African Journals Online (AJOL)

    Interpretation by use of quantitative methods of electric log dataset was successfully applied to sandstone aquifers in parts of Anambra Basin of Nigeria. Depth to aquifers varies between 67 and 213m above mean sea level, porosity ranges between 13 and 55%. Transverse (unit) resistance T changes between 0.037 and ...

  10. DEPLOYMENT OF VOIP ON WIRELINE NETWORK USING OPNET

    African Journals Online (AJOL)

    EKPAH

    both the growing Internet industry and established telecommunications industry. VoIP has become a potential alternative to the Public switching telecommunication network due to its reduced cost. However, despite its reduced cost it has so many challenges which affect its successful deployment. This paper presents a ...

  11. Ground-water data collected at the Nevada Test Site and vicinity, Nye County, Nevada, water years 1988--89

    International Nuclear Information System (INIS)

    Wood, D.B.

    1992-01-01

    The US Geological Survey, in support of the US Department of Energy Hydrology/Radionuclide Migration Program, collects and compiles hydrologic and geohydrologic data to aid in characterizing the regional and local ground-water flow systems underlying the Nevada Test Site. This report presents selected ground-water data collected from wells and test holes at and in the vicinity of the Nevada Test Site. Depth-to-water measurements were made at 72 sites and water samples were collected and analyzed for tritium concentrations for 14 sites during the 1988 and 1989 water years. Available historical data for these sites have been included to show the long-term depth-to-water fluctuations and to provide a record of all reported completion depths or open intervals for associated wells and test holes. Depth-to-water measurements show that the altitude of the ground-water surface in the Nevada Test Site area ranged from 1,966 to 6,377 feet above sea level. Depth-to-water measurements were obtained by a combination of wire-line, steel-tape, and iron-horse methods. Tritium concentrations in bailed water samples ranged from -10 to 2,600 picocuries per liter

  12. Unit Monitors Manchester-Format Data Buses

    Science.gov (United States)

    Amador, Jose J.

    1994-01-01

    Circuit card converts data signals into convenient hexadecimal form for troubleshooting. Bus-monitoring unit converts data signals from Manchester II format used on data bus into hexadecimal format. Monitoring circuit causes hexadecimal words to display on video terminal, where test engineer compares them with hexadecimal records for troubleshooting. Circuit monitors one bus or two buses simultaneously.

  13. Task Order 22 – Engineering and Technical Support, Deep Borehole Field Test. AREVA Summary Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Denton, Mark A. [AREVA Federal Services, Charlotte, NC (United States)

    2016-01-19

    Under Task Order 22 of the industry Advisory and Assistance Services (A&AS) Contract to the Department of Energy (DOE) DE-NE0000291, AREVA has been tasked with providing assistance with engineering, analysis, cost estimating, and design support of a system for disposal of radioactive wastes in deep boreholes (without the use of radioactive waste). As part of this task order, AREVA was requested, through a letter of technical direction, to evaluate Sandia National Laboratory’s (SNL’s) waste package borehole emplacement system concept recommendation using input from DOE and SNL. This summary review report (SRR) documents this evaluation, with its focus on the primary input document titled: “Deep Borehole Field Test Specifications/M2FT-15SN0817091” Rev. 1 [1], hereafter referred to as the “M2 report.” The M2 report focuses on the conceptual design development for the Deep Borehole Field Test (DBFT), mainly the test waste packages (WPs) and the system for demonstrating emplacement and retrieval of those packages in the Field Test Borehole (FTB). This SRR follows the same outline as the M2 report, which allows for easy correlation between AREVA’s review comments, discussion, potential proposed alternatives, and path forward with information established in the M2 report. AREVA’s assessment focused on three primary elements of the M2 report: the conceptual design of the WPs proposed for deep borehole disposal (DBD), the mode of emplacement of the WP into DBD, and the conceptual design of the DBFT. AREVA concurs with the M2 report’s selection of the wireline emplacement mode specifically over the drill-string emplacement mode and generically over alternative emplacement modes. Table 5-1 of this SRR compares the pros and cons of each emplacement mode considered viable for DBD. The primary positive characteristics of the wireline emplacement mode include: (1) considered a mature technology; (2) operations are relatively simple; (3) probability of a

  14. The Format Dilemma.

    Science.gov (United States)

    Oder, Norman

    2002-01-01

    Reports results of a survey of public libraries that investigated trends in audiovisual materials. Highlights include format issues; audiobooks; media budgets for various formats; video collections; DVDs; circulation; collection sizes; music CDs; and future possibilities. (LRW)

  15. Production and testing of the ENEA-Bologna VITJEFF32.BOLIB (JEFF-3.2) multi-group (199 n + 42 γ) cross section library in AMPX format for nuclear fission applications

    Science.gov (United States)

    Pescarini, Massimo; Orsi, Roberto; Frisoni, Manuela

    2017-09-01

    The ENEA-Bologna Nuclear Data Group produced the VITJEFF32.BOLIB multi-group coupled neutron/photon (199 n + 42 γ) cross section library in AMPX format, based on the OECD-NEA Data Bank JEFF-3.2 evaluated nuclear data library. VITJEFF32.BOLIB was conceived for nuclear fission applications as European counterpart of the ORNL VITAMIN-B7 similar library (ENDF/B-VII.0 data). VITJEFF32.BOLIB has the same neutron and photon energy group structure as the former ORNL VITAMIN-B6 reference library (ENDF/B-VI.3 data) and was produced using similar data processing methodologies, based on the LANL NJOY-2012.53 nuclear data processing system for the generation of the nuclide cross section data files in GENDF format. Then the ENEA-Bologna 2007 Revision of the ORNL SCAMPI nuclear data processing system was used for the conversion into the AMPX format. VITJEFF32.BOLIB contains processed cross section data files for 190 nuclides, obtained through the Bondarenko (f-factor) method for the treatment of neutron resonance self-shielding and temperature effects. Collapsed working libraries of self-shielded cross sections in FIDO-ANISN format, used by the deterministic transport codes of the ORNL DOORS system, can be generated from VITJEFF32.BOLIB through the cited SCAMPI version. This paper describes the methodology and specifications of the data processing performed and presents some results of the VITJEFF32.BOLIB validation.

  16. Production and testing of the ENEA-Bologna VITJEFF32.BOLIB (JEFF-3.2 multi-group (199 n + 42 γ cross section library in AMPX format for nuclear fission applications

    Directory of Open Access Journals (Sweden)

    Pescarini Massimo

    2017-01-01

    Full Text Available The ENEA-Bologna Nuclear Data Group produced the VITJEFF32.BOLIB multi-group coupled neutron/photon (199 n + 42 γ cross section library in AMPX format, based on the OECD-NEA Data Bank JEFF-3.2 evaluated nuclear data library. VITJEFF32.BOLIB was conceived for nuclear fission applications as European counterpart of the ORNL VITAMIN-B7 similar library (ENDF/B-VII.0 data. VITJEFF32.BOLIB has the same neutron and photon energy group structure as the former ORNL VITAMIN-B6 reference library (ENDF/B-VI.3 data and was produced using similar data processing methodologies, based on the LANL NJOY-2012.53 nuclear data processing system for the generation of the nuclide cross section data files in GENDF format. Then the ENEA-Bologna 2007 Revision of the ORNL SCAMPI nuclear data processing system was used for the conversion into the AMPX format. VITJEFF32.BOLIB contains processed cross section data files for 190 nuclides, obtained through the Bondarenko (f-factor method for the treatment of neutron resonance self-shielding and temperature effects. Collapsed working libraries of self-shielded cross sections in FIDO-ANISN format, used by the deterministic transport codes of the ORNL DOORS system, can be generated from VITJEFF32.BOLIB through the cited SCAMPI version. This paper describes the methodology and specifications of the data processing performed and presents some results of the VITJEFF32.BOLIB validation.

  17. The formation of cluster galaxies

    Science.gov (United States)

    Mancone, Conor L.

    2012-06-01

    In this work I sought to understand the formation and evolution of galaxies. Specifically, I studied three key aspects of galaxy formation: star formation, mass assembly, and structural evolution. Past research has shown that the formation of a galaxy is strongly coupled to its local environment (i.e. the local galaxy density). Therefore, I studied the evolution of cluster galaxies because clusters are the highest density environments that exist in the universe. In turn, the observational results found herein form a foundation upon which to test theories of galaxy formation in the densest environments. I used the latest sample of galaxy clusters from the Bootes region to measure the near-infrared luminosity function (NIR LF) of cluster galaxies from 0 1.3. I used deeper IRAC imaging to study the NIR LF of high redshift cluster galaxies (1 pulsating AGB stars, which are poorly understood observationally but contribute substantially to the NIR light of a stellar population. I also created the Python Galaxy Fitter (PyGFit), a program which measures PSF matched photometry from crowded imaging with disparate PSFs and resolutions. This enabled accurate measurement of spectral energy distributions (SEDs) in crowded cluster fields.

  18. Formative evaluation of handwriting quality.

    Science.gov (United States)

    Stefansson, Thorarinn; Karlsdottir, Ragnheidur

    2003-12-01

    A test developed for formative evaluation of handwriting quality is described and validated. The test is based on a domain of content for the handwriting skill defined in terms of the deviation of the writing in a handwriting specimen from the handwriting standard. A corresponding domain of elementary test items is defined in terms of the means and the variances of the deviations from the handwriting standard in shape, size, and position of each individual letter. The elementary items are scored on a dichotomous scale and cumulated into scores for letter items and a domain-referenced final score that can be interpreted as the fraction of the domain of content of the construct of handwriting quality that is mastered. Validation of the test was based on handwriting specimens from a school class of 23 children, tested in a longitudinal design from Grades 1 through 5. Coefficients of concurrent validity for final scores equal to .91, .86, .88, and .86 were obtained for Grades 1, 2, 3, and 5, respectively, using traits of the handwriting scored on an ordinal norm-referenced scale as criteria. Coefficients of intertest, intertask, intrascorer, and interscorer reliability for final scores equal to .87, .86, .94, and .80 were found, respectively, for the handwriting specimens from Grade 2. A survey of previously published handwriting quality tests indicates that most of them are not well suited for formative purposes although most of them were adequate for summative purposes.

  19. Testing Backbone.js

    CERN Document Server

    Roemer, Ryan

    2013-01-01

    This book is packed with the step by step tutorial and instructions in recipe format helping you setup test infrastructure and gradually advance your skills to plan, develop, and test your backbone applications.If you are a JavaScript developer looking for recipes to create and implement test support for your backbone application, then this book is ideal for you.

  20. Formate Formation and Formate Conversion in Biological Fuels Production

    NARCIS (Netherlands)

    Crable, B.R.; Plugge, C.M.; McInerney, M.J.; Stams, A.J.M.

    2011-01-01

    Biomethanation is a mature technology for fuel production. Fourth generation biofuels research will focus on sequestering CO2 and providing carbon-neutral or carbon-negative strategies to cope with dwindling fossil fuel supplies and environmental impact. Formate is an important intermediate in the

  1. Formation temperatures of thermogenic and biogenic methane

    Science.gov (United States)

    Stolper, D.A.; Lawson, M.; Davis, C.L.; Ferreira, A.A.; Santos Neto, E. V.; Ellis, G.S.; Lewan, M.D.; Martini, Anna M.; Tang, Y.; Schoell, M.; Sessions, A.L.; Eiler, J.M.

    2014-01-01

    Methane is an important greenhouse gas and energy resource generated dominantly by methanogens at low temperatures and through the breakdown of organic molecules at high temperatures. However, methane-formation temperatures in nature are often poorly constrained. We measured formation temperatures of thermogenic and biogenic methane using a “clumped isotope” technique. Thermogenic gases yield formation temperatures between 157° and 221°C, within the nominal gas window, and biogenic gases yield formation temperatures consistent with their comparatively lower-temperature formational environments (<50°C). In systems where gases have migrated and other proxies for gas-generation temperature yield ambiguous results, methane clumped-isotope temperatures distinguish among and allow for independent tests of possible gas-formation models.

  2. Formation Flying Concept Issues

    Directory of Open Access Journals (Sweden)

    M. V. Palkin

    2015-01-01

    Full Text Available The term “formation flying” implies coordinated movement of at least two satellites on coplanar and non-coplanar orbits with a maximum distance between them being much less than the length of the orbit. Peculiarities of formation flying concept also include:- automatic coordination of satellites;- sub-group specialization of formation flying satellites;- equipment and data exchange technology unification in each specialized group or subgroup.Formation flying satellites can be classified according to the configuration stability level (order (array, cluster («swarm», intergroup specialization rules («central satellite», «leader», «slave», manoeuvrability («active» and «passive» satellites.Tasks of formation flying include:- experiments with payload, distributed in formation flying satellites;- various near-earth space and earth-surface research;- super-sized aperture antenna development;- land-based telescope calibration;- «space advertisement» (earth-surface observable satellite compositions of a logotype, word, etc.;- orbital satellite maintenance, etc.Main issues of formation flying satellite system design are:- development of an autonomous satellite group manoeuvring technology;- providing a sufficient characteristic velocity of formation flying satellites;- ballistic and navigation maintenance for satellite formation flying;- technical and economic assessment of formation flying orbital delivery and deployment;- standardization, unification, miniaturization and integration of equipment;- intergroup and intersatellite function redistribution.

  3. From Sermon Formation to Preacher Formation

    DEFF Research Database (Denmark)

    Gaarden, Marianne

    2016-01-01

    today is less about exercising the authority of an office and more about embodying authenticity. I argue that traditional homiletic education can benefit from implementing a learner-centered approach to teaching moving from sermon formation towards preacher formation, in order to develop and train...... judged, evaluated, or critiqued. In this paper, I explain how a learner-centered approach to education works in practice and show how pastors experience the teaching method and the congregations’ positive response to their improvements. I shall present the results of a focus-group interview with pastors...

  4. Agile Management and Interoperability Testing of SDN/NFV‐Enriched 5G Core Networks

    Directory of Open Access Journals (Sweden)

    Taesang Choi

    2018-02-01

    Full Text Available In the fifth generation (5G era, the radio internet protocol capacity is expected to reach 20 Gb/s per sector, and ultralarge content traffic will travel across a faster wireless/wireline access network and packet core network. Moreover, the massive and mission‐critical Internet of Things is the main differentiator of 5G services. These types of real‐time and large‐bandwidth‐consuming services require a radio latency of less than 1 ms and an end‐to‐end latency of less than a few milliseconds. By distributing 5G core nodes closer to cell sites, the backhaul traffic volume and latency can be significantly reduced by having mobile devices download content immediately from a closer content server. In this paper, we propose a novel solution based on software‐defined network and network function virtualization technologies in order to achieve agile management of 5G core network functionalities with a proof‐of‐concept implementation targeted for the PyeongChang Winter Olympics and describe the results of interoperability testing experiences between two core networks.

  5. Evaluation of Cavity Collapse and Surface Crater Formation at the Norbo Underground Nuclear Test in U8c, Nevada Nuclear Security Site, and the Impact on Stability of the Ground Surface

    Energy Technology Data Exchange (ETDEWEB)

    Pawloski, G A

    2012-06-18

    Lawrence Livermore National Laboratory (LLNL) Containment Program performed a review of nuclear test-related data for the Norbo underground nuclear test in U8c to assist in evaluating this legacy site as a test bed for application technologies for use in On-Site Inspections (OSI) under the Comprehensive Nuclear Test Ban Treaty. This request is similar to one made for the Salut site in U8c (Pawloski, 2012b). Review of the Norbo site is complicated because the test first exhibited subsurface collapse, which was not unusual, but it then collapsed to the surface over one year later, which was unusual. Of particular interest is the stability of the ground surface above the Norbo detonation point. Proposed methods for on-site verification include radiological signatures, artifacts from nuclear testing activities, and imaging to identify alteration to the subsurface hydrogeology due to the nuclear detonation. Aviva Sussman from the Los Alamos National Laboratory (LANL) has also proposed work at this site. Both proposals require physical access at or near the ground surface of specific underground nuclear test locations at the Nevada Nuclear Security Site (NNSS), formerly the Nevada Test Site (NTS), and focus on possible activities such as visual observation, multispectral measurements, and shallow and deep geophysical surveys.

  6. Stages of ores formation

    International Nuclear Information System (INIS)

    Khasanov, A.Kh.

    1988-01-01

    Deposit formation (especially endogenous) is the complicated, multi-stage and long process. Establishment of deposit formation succession, age-specific correlations of minerals and aggregates have a high importance at solving genetic questions. Studying of minerals correlations and mineral aggregates, succession of their crystallization and other observations let restore the history of deposit formation, pick up in it different on duration and physical and chemical conditions stages

  7. Understanding Alliance Formation Patterns

    Science.gov (United States)

    2015-12-01

    might take a different trend in different eras, in which it is either positive, leading to a bigger chance of alliance formation , or negative, leading...of war and peace with regard to systemic analysis. Therefore, it is reasonable that there is a deviation in the trends of alliance formation during...ALLIANCE FORMATION PATTERNS by Wael Abbas Zoltan Schneider December 2015 Thesis Advisor: William P. Fox Second Reader: Heather S. Gregg

  8. Exploring Opponent Formats

    DEFF Research Database (Denmark)

    Jensen, Mads Møller; Rasmussen, Majken; Grønbæk, Kaj

    2013-01-01

    of how the opponent format and relationships impact a game are almost absent in current research. Thus, this paper aims to elucidate how the perception of a competition differs, depending on the opponent format, by presenting a game mechanic framework. The paper furthermore presents an interactive...... football-training platform, as well as games designed to explore the different opponent formats. The games are qualitatively evaluated to illuminate the qualities of and distinctions between different types of opponent formats, proposed by the framework terminology....

  9. ENDF/B format

    International Nuclear Information System (INIS)

    Khalil, M.A.; Lemmel, H.D.

    1986-09-01

    This document is a brief user's description of the format of ENDF/B. This format, originally designed for the US Evaluated Nuclear Data File, is recommended for international use. This summary is an aid to customers of the IAEA Nuclear Data Section when receiving data retrievals in ENDF/B format. For more detailed information the report BNL-NCS-50496 (ENDF 102) should be consulted. An Appendix to the present document gives a summary of the format differences between ENDF/B-4 and ENDF/B-5. (author)

  10. Data format translation routines

    International Nuclear Information System (INIS)

    Burris, R.D.

    1981-02-01

    To enable the effective connection of several dissimilar computers into a network, modification of the data being passed from one computer to another may become necessary. This document describes a package of routines which permit the translation of data in PDP-8 formats to PDP-11 or DECsystem-10 formats or from PDP-11 format to DECsystem-10 format. Additional routines are described which permit the effective use of the translation routines in the environment of the Fusion Energy Division (FED) network and the Elmo Bumpy Torus (EBT) data base

  11. Is molecular gas necessary for star formation?

    Science.gov (United States)

    Glover, Simon C. O.; Clark, Paul C.

    2012-03-01

    On galactic scales, the surface density of star formation appears to be well correlated with the surface density of molecular gas. This has led many authors to suggest that there exists a causal relationship between the chemical state of the gas and its ability to form stars - in other words, the assumption that the gas must be molecular before star formation can occur. We test this hypothesis by modelling star formation within a dense cloud of gas with properties similar to a small molecular cloud using a series of different models of the chemistry, ranging from one in which the formation of molecules is not followed and the gas is assumed to remain atomic throughout, to one that tracks the formation of both H2 and CO. We find that the presence of molecules in the gas has little effect on the ability of the gas to form stars: star formation can occur just as easily in atomic gas as in molecular gas. At low densities (makeup, we find that the most important factor controlling the rate of star formation is the ability of the gas to shield itself from the interstellar radiation field. As this is also a prerequisite for the survival of molecules within the gas, our results support a picture in which molecule formation and the formation of cold gas are both correlated with the column density of the cloud - and thus its ability to shield itself - rather than being directly correlated with each other.

  12. ENDF/B Format

    International Nuclear Information System (INIS)

    Khalil, M.A.

    1975-01-01

    This document is a brief user's description of the format of ENDF/B, the evaluated neutron nuclear data library of the US National Nuclear Data Center. This summary is an aid to customers of the IAEA Nuclear Data Section when receiving data retrievals in ENDF/B format. For more detailed information the report BNL-50274 (ENDF-102) should be consulted. (author)

  13. Diminutive formations in Xitsonga

    African Journals Online (AJOL)

    Kate H

    Introduction. In Xitsonga diminutive formation, the juncture between the root and the suffix undergoes various phonological processes: glide formation, velarisation and vowel deletion. We argue that these seemingly disjointed processes are results of repair strategies that apply in order to avoid a sequence of labial sounds.

  14. Divisions-ST Formation

    CERN Document Server

    Henny, L

    2001-01-01

    Au CERN la formation est une partie intégrante des activités de l'Organisation. Mentionnée dans le Statut du Personnel depuis l'origine, elle figure au Règlement depuis 1981 et est largement explicitée dans la Circulaire Administrative N° 16. L'organe réglementaire est constitué par la Commission Paritaire de Formation (Joint Training Board dont le sigle est JTB) qui a pour but de conseiller le Directeur Général en matière de formation, de définir la politique de formation et d'en faire l'évaluation. Des organes spécifiques ont été mis en place pour organiser les différents programmes : le Groupe Formation et Développement, le Comité exécutif de formation (sigle TEC), le Comité d'enseignement académique. Des délégués divisionnaires à la formation (sigle DTO) servent de courroie de transmission entre ces organes, le personnel et le Service de l'Enseignement (Div. HR). La Division ST dont les activités présentent une grande variété se doit de poursuivre une politique de formation s...

  15. Modelling the response of the Cased Hole Formation Resistivity tool in order to determine the depth of gas hydrate dissociation during the thermal test in the JAPEX/JNOC/GSC et al. Mallik 5L-38 gas hydrate production research well

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, B. [Schlumberger-Doll Research, Ridgefield, CT (United States); Dubourg, I. [Etudes et Productions Schlumberger, Clamart (France); Collett, T.S. [United States Geological Survey, Denver, CO (United States); Lewis, R.E. [Schlumberger Oilfield Services, Oklahoma City, OK (United States)

    2005-07-01

    The physical response of a gas hydrate deposit to various advanced production methods was field tested at the JAPEX/JNOC/GSC et al. Mallik 5L-38 gas hydrate production research well. The annular radius of gas hydrate dissociation that occurred around the wellbore during the thermal test in the Mallik 5L-38 well was determined using iterative forward modelling of Cased Hole Formation Resistivity (CHFR) well logs. According to modeling results, the radius of gas hydrate dissociation had large local variations and was far from uniform. A comparison of CHFR modeling results and measured gas volumes at the surface suggest that most of the gas produced during the thermal test in the Mallik 5L-38 well was accurately measured at the surface. It was concluded that the CHFR modelling method is a promising method to evaluate future gas hydrate dissociation in single-wells.

  16. Manuel UNIMARC format bibliographique

    CERN Document Server

    2007-01-01

    This manual is the French translation of the second edition of UNIMARC Manual: bibliographic format published in English in 1994 and completed by 5 updates published from 1996 to 2005. This 5th French edition is composite. It reproduces identically a part of the 4th edition published in 2002 and, for the fields of the format modified in the Update 5, it offers a new more structured presentation. This is a handbook dedicated to French-speaking users of the UNIMARC format for bibliographic descriptions.

  17. Production test planning for the Japex/JNOC/GSC Mallik 5L-38 gas hydrate research well

    Energy Technology Data Exchange (ETDEWEB)

    Satoh, T. [Japan Petroleum Exploration Co. Ltd., Tokyo (Japan); Dallimore, S. [Geological Survey of Canada, Sidney, BC (Canada); Collett, T. [United States Geological Survey, Denver, CO (United States); Inoue, T. [Japan National Oil Corp., Chiba (Japan); Hancock, S.; Weatherill, B. [APA Petroleum Engineering Ltd., Calgary, AB (Canada); Moridis, G. [California Univ., Berkeley, CA (United States). Lawrence Berkeley National Laboratory

    2004-07-01

    Accumulations of natural gas hydrate occur at shallow depths throughout the Mackenzie Delta region of northern Canada. This has been confirmed by the large hydrate concentrations found in Mallik L-38 and Ivik J-26, 2 exploratory wells drilled in 1972 by Imperial Oil Limited. During the exploration program, several cased hole closed chamber drill stem tests were performed in the hydrate and associated free gas intervals. Although some gas was initially produced from the hydrates, production during the extended flow period was too small to measure. Modern pressure transient analysis techniques were recently used to analyze the bottom hole data. Results reveal that gas continued to evolve into the wellbore throughout the shut-in periods, suggesting that hydrate dissociation may have occurred in response to the pressure drawdown created by the closed chamber test. These results contributed to the decision to use modern pressure drawdown tests for the Mallik 5L-38 well, using Schlumberger's Modular Dynamic Tester (MDT) cased hole wireline tool. The MDT strategy involved obtaining pressure transient data and fluid samples from the free gas, free water, and hydrate intervals, including hydrate layers with different lithologies and saturations. The hydrate accumulation in the Mallik 5L-38 well was also tested by producing the free gas interval and perforating the entire hydrate interval for a large scale pressure drawdown test. Other tests involved horizontal wells, complex multiple well experiments and thermal stimulations. The primary scientific goal of the Mallik 5L-38 test program was to determine the in-situ kinetic and thermodynamic properties of naturally occurring hydrates. A combination of MDT tests and a separate thermal stimulation flow test was selected as the best method to achieve this goal. 1 fig.

  18. Cosmology and galaxy formation

    International Nuclear Information System (INIS)

    Rees, M.J.

    1977-01-01

    Implications of the massive halos and ''missing mass'' for galaxy formation are addressed; it is suggested that this mass consists of ''Population III'' stars that formed before the galaxies did. 19 references

  19. PCF File Format.

    Energy Technology Data Exchange (ETDEWEB)

    Thoreson, Gregory G [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-08-01

    PCF files are binary files designed to contain gamma spectra and neutron count rates from radiation sensors. It is the native format for the GAmma Detector Response and Analysis Software (GADRAS) package [1]. It can contain multiple spectra and information about each spectrum such as energy calibration. This document outlines the format of the file that would allow one to write a computer program to parse and write such files.

  20. Impact of fault damage zones on reservoir performance in the Hibernia oilfield (Jeanne d'Arc Basin, Newfoundland) : an analysis of structural, petrophysical and dynamic well-test data

    Energy Technology Data Exchange (ETDEWEB)

    Porter, J.R.; McAllister, E.; Fisher, Q.J.; Knipe, R.J.; Condliffe, D.M.; Kay, M.A. [Leeds Univ., Leeds (United Kingdom). Dept. of Earth Sciences, Rock Deformation Research Group; Stylianides, G.; Sinclair, I.K. [Hibernia Management and Development Co. Ltd., St. John' s, NL (Canada)

    2005-07-01

    Petroleum reservoirs are typically characterized by combining conventional core analysis results, wire-line log data and sedimentological description with production data. This study emphasized the benefits of including structural analysis of core material as part of general reservoir characterization. In particular, it examined the influence of fault zones on fluid flow within the Hibernia Formation in the Hibernia Oilfield in the Jeanne d'Arc Basin on the Grand Banks of Newfoundland. The geologic setting and background to the Hibernia Field was presented. Fault seal analysis was used in the study to help manage the compartmentalized Hibernia Field. Cross-fault juxtaposition analysis was also integrated with structural logging and petrophysical measurement of core material. The analysis of core material resulted in an increased confidence in production data interpretation. The study also examined how deformation features present within the Hibernia Formation drill cores have the potential to act as baffles or seals to hydrocarbon flow. Deformation features were described with reference to low, intermediate and high clay content fault rocks. It was shown that fault rocks are capable of severely restricting fluid flow, particularly when close to production or injection wells. The targeting of wheels to avoid the damage-zone envelope associated with seismic-scale faults will result in a large improvement in producer-injector performance despite reducing the potential drainage volume. The results confirm that inclusion of structural analysis in reservoir characterization studies can have a great and positive impact on field management strategies. 31 refs., 2 tabs., 8 figs.

  1. Autonomous Formation Flight

    Science.gov (United States)

    Schkolnik, Gerard S.; Cobleigh, Brent

    2004-01-01

    NASA's Strategic Plan for the Aerospace Technology Enterprise includes ambitious objectives focused on affordable air travel, reduced emissions, and expanded aviation-system capacity. NASA Dryden Flight Research Center, in cooperation with NASA Ames Research Center, the Boeing Company, and the University of California, Los Angeles, has embarked on an autonomous-formation-flight project that promises to make significant strides towards these goals. For millions of years, birds have taken advantage of the aerodynamic benefit of flying in formation. The traditional "V" formation flown by many species of birds (including gulls, pelicans, and geese) enables each of the trailing birds to fly in the upwash flow field that exists just outboard of the bird immediately ahead in the formation. The result for each trailing bird is a decrease in induced drag and thus a reduction in the energy needed to maintain a given speed. Hence, for migratory birds, formation flight extends the range of the system of birds over the range of birds flying solo. The Autonomous Formation Flight (AFF) Project is seeking to extend this symbiotic relationship to aircraft.

  2. Star Formation in Tadpole Galaxies

    Directory of Open Access Journals (Sweden)

    Casiana Muñoz-Tuñon

    2014-12-01

    Full Text Available Tadpole Galaxies look like a star forming head with a tail structure to the side. They are also named cometaries. In a series of recent works we have discovered a number of issues that lead us to consider them extremely interesting targets. First, from images, they are disks with a lopsided starburst. This result is rmly  established with long slit spectroscopy in a nearby representative sample. They rotate with the head following the rotation pattern but displaced from the rotation center. Moreover, in a search for extremely metal poor (XMP galaxies, we identied tadpoles as the dominant shapes in the sample - nearly 80% of the local XMP galaxies have a tadpole morphology. In addition, the spatially resolved analysis of the metallicity shows the remarkable result that there is a metallicity drop right at the position of the head. This is contrary to what intuition would say and dicult to explain if star formation has happened from gas processed in the disk. The result could however be understood if the star formation is driven by pristine gas falling into the galaxy disk. If conrmed, we could be unveiling, for the rst time, cool  ows in action in our nearby world. The tadpole class is relatively frequent at high redshift - 10% of resolvable galaxies in the Hubble UDF but less than 1% in the local Universe. They are systems that could track cool ows and test models of galaxy formation.

  3. Automated Test-Form Generation

    Science.gov (United States)

    van der Linden, Wim J.; Diao, Qi

    2011-01-01

    In automated test assembly (ATA), the methodology of mixed-integer programming is used to select test items from an item bank to meet the specifications for a desired test form and optimize its measurement accuracy. The same methodology can be used to automate the formatting of the set of selected items into the actual test form. Three different…

  4. Note on Reliability of Fixed-Response Formats.

    Science.gov (United States)

    Bardo, John W.; Yeager, Samuel J.

    1982-01-01

    Responses to various fixed test-response formats were examined for "reliability" due to systematic error; Cronbach's alphas up to .67 were obtained. Of formats tested, four-point Likert Scales were least affected while forms of lines and faces were most problematic. Possible modification in alpha to account for systematic bias is…

  5. Methane formation in tritium gas exposed to stainless steel

    International Nuclear Information System (INIS)

    Morris, G.A.

    1977-01-01

    Tests were performed to determine the effect cleanliness of a surface exposed to tritium gas had on methane formation. These tests performed on 304 stainless steel vessels, cleaned in various ways, showed that the methane formation was reduced by the use of various cleaning procedures

  6. Densities and Kinematic Viscosities for the Systems Benzene + Methyl Formate, Benzene + Ethyl Formate, Benzene + Propyl Formate, and Benzene + Butyl Formate

    DEFF Research Database (Denmark)

    Emmerling, Uwe; Rasmussen, Peter

    1998-01-01

    Densities and kinematic viscosities have been measured for the system benzene + methyl formate at 20°C and for the systems benzene + ethyl formate, benzene + propyl formate, and benzene + butyl formate from 20°C to 50°C. The results for the system benzene + methyl formate have been correlated usi...

  7. Geotechnical characterization through in situ and laboratory tests of several geological formations present in the route of the Future Fix Connection between Spain and Morocco through Gibraltar Strait; Caracterizacion geotecnica mediante ensayos in situ y de laboratorio de algunas formaciones geologicas presentes en la traza de la Futura Conexion Fija entre Espana y Marruecos a traves del estrecho de Gibraltar

    Energy Technology Data Exchange (ETDEWEB)

    Perucho Martinez, A.; Diez Torres, J. A.; Muniz Menendez, M.; Cano Linares, H.; Ruiz Fonticiella, J. M.

    2015-07-01

    CEDEX and SECEGSA (Sociedad Española para la Comunicación Fija a través del Estrecho de Gibraltar), Have been collaborating since a few decades ago to study different technical aspects related to the Fix Connection through the Gibraltar Strait, mainly in relation to the geological and geotechnical properties of the different formations present in the route. In order to do so, many studies of geotechnical characterization of materials, in situ and laboratory testing campaigns have been carried out. Furthermore, they have participated in some Expertise Committees carrying out some advice work related to studies performed by other organizations. This paper presents a brief description of the most relevant aspects of the main geological and geotechnical studies performed related to this Project of the Future Fix Connection and obtained through the study of SECEGSAs extensive data base. Moreover, it includes a synopsis of the geotechnical characterization carried out through in situ and laboratory tests on different Miocene and Eocene formations from the Algeciras Unit, present in the route of the future Fix Connection between Spain and gibraltar through the Gibraltar Strait. (Author)

  8. Galaxy formation and evolution

    CERN Document Server

    Mo, Houjun; White, Simon

    2010-01-01

    The rapidly expanding field of galaxy formation lies at the interface between astronomy, particle physics, and cosmology. Covering diverse topics from these disciplines, all of which are needed to understand how galaxies form and evolve, this book is ideal for researchers entering the field. Individual chapters explore the evolution of the Universe as a whole and its particle and radiation content; linear and nonlinear growth of cosmic structure; processes affecting the gaseous and dark matter components of galaxies and their stellar populations; the formation of spiral and elliptical galaxies; central supermassive black holes and the activity associated with them; galaxy interactions; and the intergalactic medium. Emphasizing both observational and theoretical aspects, this book provides a coherent introduction for astronomers, cosmologists, and astroparticle physicists to the broad range of science underlying the formation and evolution of galaxies.

  9. Forces in strategy formation

    DEFF Research Database (Denmark)

    Steensen, Elmer Fly; Sanchez, Ron

    2008-01-01

    This chapter proposes that organizational strategy formation should be characterized theoretically as a process that is subject to several interacting forces, rather than represented by separate discrete decisionmodels or theoretic perspectives, as is commonly done in the strategic management...... literature. Based on an extensive review of relevant theory and empirical work in strategic decision-making, organizational change theory, cognitive and social psychology, and strategy processes, seven kinds of ''forces'' - rational, imposed, teleological, learning, political, heuristic, and social...... - are identified as interacting in and having significant influence on the strategy formation process. It is further argued that by applying a holistic ''forces-view'' of the significant and interacting influences on strategy formation, we can better understand the dynamics and challenges in managing the process...

  10. Formation of ball lightning

    Energy Technology Data Exchange (ETDEWEB)

    Silberg, P.A. (2833 Lawton Drive, Amarillo, Texas (USA))

    A plasma continuum model for the formation of ball lightning is developed based on a substantial number of reports that the ball is often in the discharge column of a previous lightning stroke. The usual method of setting up the plasma equation for a one-component electron plasma is used. An approximate equation for the plasma is derived from the describing equation which is then solved exactly in terms of the Jacobi elliptic functions. The formation of the ball is based on a nonlinearity of the plasma equation which under certain circumstances permits the field to collapse into a small region. This collapse is interpreted to be ball lightning. The approximate equation derived for the plasma has the same form as a previous equation used to describe the formation of the fireball plasma.

  11. Tritiated ammonia formation

    International Nuclear Information System (INIS)

    Heung, L.K.

    1995-01-01

    When nitrogen was selected as the glovebox atmosphere for the Replacement Tritium Facility (RTF) at the Savannah River Site (SRS), a concern was raised as to the possibility of tritiated ammonia formation in the gloveboxes. Experimental data were produced to study the tritiated ammonia formation rate in a tritium and nitrogen mixture. A rate equation that closely simulates the experimental data was developed. This rate equation can be used to calculate the formation of tritiated ammonia from different concentrations of tritium and nitrogen. The reaction of T 2 and N 2 to form NT 3 is a slow process, particularly when the tritium concentration is low. The reaction requires weeks or months to reach radiochemical equilibrium dependent on the concentrations of the reactants. 4 refs., 6 figs., 1 tab

  12. Principles of star formation

    CERN Document Server

    Bodenheimer, Peter H

    2011-01-01

    Understanding star formation is one of the key fields in present-day astrophysics. This book treats a wide variety of the physical processes involved, as well as the main observational discoveries, with key points being discussed in detail. The current star formation in our galaxy is emphasized, because the most detailed observations are available for this case. The book presents a comparison of the various scenarios for star formation, discusses the basic physics underlying each one, and follows in detail the history of a star from its initial state in the interstellar gas to its becoming a condensed object in equilibrium. Both theoretical and observational evidence to support the validity of the general evolutionary path are presented, and methods for comparing the two are emphasized. The author is a recognized expert in calculations of the evolution of protostars, the structure and evolution of disks, and stellar evolution in general. This book will be of value to graduate students in astronomy and astroph...

  13. Double layer formation

    International Nuclear Information System (INIS)

    Singh, N.

    1982-01-01

    Results from several numerical simulations of the formation of double layers in plasmas with a constant potential drop across them are presented. Here the emphasis is mainly on plasma processes during the formation of double layers. The recurring formation of double layers, their propagation and associated current interruptions are observed when the electron current injected into the simulation region from the low potential side exceeds the electron thermal current. This recurring process is stopped (or delayed) when the electron current recuperation is inhibited by a small magnetic force on the electrons. The motion of double layers is examined and it is found that the motion is caused by the interruption of the ion current from the high potential side. The subsequent recovery of this current renders the double layer stationary. (author)

  14. Planetesimals and Planet Formation

    Science.gov (United States)

    Chambers, John

    The first step in the standard model for planet formation is the growth of gravitationally bound bodies called ``planetesimals'' from dust grains in a protoplanetary disk. Currently, we do not know how planetesimals form, how long they take to form, or what their sizes and mechanical properties are. The goal of this proposal is to assess how these uncertainties affect subsequent stages of planetary growth and the kind of planetary systems that form. The work will address three particular questions: (i) Can the properties of small body populations in the modern Solar System constrain the properties of planetesimals? (ii) How do the properties of planetesimals affect the formation of giant planets? (iii) How does the presence of a water ice condensation front (the ``snow line'') in a disk affect planetesimal formation and the later stages of planetary growth? These questions will be examined with computer simulations of planet formation using new computer codes to be developed as part of the proposal. The first question will be addressed using a statistical model for planetesimal coagulation and fragmentation. This code will be merged with the proposer's Mercury N-body integrator code to model the dynamics of large protoplanets in order to address the second question. Finally, a self- consistent model of disk evolution and the radial transport of water ice and vapour will be added to examine the third question. A theoretical understanding of how planets form is one of the key goals of NASA and the Origins of Solar Systems programme. Researchers have carried out many studies designed to address this goal, but the questions of how planetesimals form and how their properties affect planet formation have received relatively little attention. The proposed work will help address these unsolved questions, and place other research in context by assessing the importance of planetesimal origins and properties for planet formation.

  15. Densities and Kinematic Viscosities for the Systems Benzene + Methyl Formate, Benzene + Ethyl Formate, Benzene + Propyl Formate, and Benzene + Butyl Formate

    DEFF Research Database (Denmark)

    Emmerling, Uwe; Rasmussen, Peter

    1998-01-01

    Densities and kinematic viscosities have been measured for the system benzene + methyl formate at 20°C and for the systems benzene + ethyl formate, benzene + propyl formate, and benzene + butyl formate from 20°C to 50°C. The results for the system benzene + methyl formate have been correlated using...... a Redlich-Kister type of expression with temperature-independent parameters and the data for the systems benzene + ethyl formate, benzene + propyl formate, and benzene + butyl formate with temperature-dependent parameters. The viscosities have furthermore been compared to values predicted by means of the GC...

  16. The formation of stars

    CERN Document Server

    Stahler, Steven W

    2008-01-01

    This book is a comprehensive treatment of star formation, one of the most active fields of modern astronomy. The reader is guided through the subject in a logically compelling manner. Starting from a general description of stars and interstellar clouds, the authors delineate the earliest phases of stellar evolution. They discuss formation activity not only in the Milky Way, but also in other galaxies, both now and in the remote past. Theory and observation are thoroughly integrated, with the aid of numerous figures and images. In summary, this volume is an invaluable resource, both as a text f

  17. Situated Formative Feedback

    DEFF Research Database (Denmark)

    Lukassen, Niels Bech; Wahl, Christian; Sorensen, Elsebeth Korsgaard

    This study addresses the conceptual challenge of providing students with good quality feedback to enhance student learning in an online community of practice (COP). The aim of the study is to identify feedback mechanisms in a virtual learning environment (VLE) and to create a full formative...... refer to this type of feedback as, Situated Formative Feedback (SFF). As a basis for exploring, identifying and discussing relevant aspects of SFF the paper analyses qualitative data from a Moodle dialogue. Data are embedded in the qualitative analytic program Nvivo and are analysed with a system...

  18. Tea aroma formation

    Directory of Open Access Journals (Sweden)

    Chi-Tang Ho

    2015-03-01

    Full Text Available Besides water, tea is one of the most popular beverages around the world. The chemical ingredients and biological activities of tea have been summarized recently. The current review summarizes tea aroma compounds and their formation in green, black, and oolong tea. The flavor of tea can be divided into two categories: taste (non-volatile compounds and aroma (volatile compounds. All of these aroma molecules are generated from carotenoids, lipids, glycosides, etc. precursors, and also from Maillard reaction. In the current review, we focus on the formation mechanism of main aromas during the tea manufacturing process.

  19. Formation Design Strategy for SCOPE High-Elliptic Formation Flying Mission

    Science.gov (United States)

    Tsuda, Yuichi

    2007-01-01

    The new formation design strategy using simulated annealing (SA) optimization is presented. The SA algorithm is useful to survey a whole solution space of optimum formation, taking into account realistic constraints composed of continuous and discrete functions. It is revealed that this method is not only applicable for circular orbit, but also for high-elliptic orbit formation flying. The developed algorithm is first tested with a simple cart-wheel motion example, and then applied to the formation design for SCOPE. SCOPE is the next generation geomagnetotail observation mission planned in JAXA, utilizing a formation flying techonology in a high elliptic orbit. A distinctive and useful heuristics is found by investigating SA results, showing the effectiveness of the proposed design process.

  20. Temperature controlled 'void' formation

    International Nuclear Information System (INIS)

    Dasgupta, P.; Sharma, B.D.

    1975-01-01

    The nucleation and growth of voids in structural materials during high temperature deformation or irradiation is essentially dependent upon the existence of 'vacancy supersaturation'. The role of temperature dependent diffusion processes in 'void' formation under varying conditions, and the mechanical property changes associated with this microstructure are briefly reviewed. (author)

  1. Formatting Design Dialogues

    DEFF Research Database (Denmark)

    Brandt, Eva; Binder, Thomas; Messeter, Jörn

    2008-01-01

    This article discusses design games as a particular genre for formatting design dialogues. In the first part of the article we review the participatory design literature for game-oriented framings of co-design. We look at what constitutes game and play, we discuss other authors’ use of games...

  2. Triggered star formation

    Czech Academy of Sciences Publication Activity Database

    Palouš, Jan; Ehlerová, Soňa

    2002-01-01

    Roč. 12, - (2002), s. 35-36 ISSN 1405-2059 R&D Projects: GA AV ČR IAA3003705; GA AV ČR KSK1048102 Institutional research plan: CEZ:AV0Z1003909 Keywords : interstellar medium * star formation * HI shells Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics

  3. PAHs and star formation

    NARCIS (Netherlands)

    Tielens, AGGM; Peeters, E; Bakes, ELO; Spoon, HWW; Hony, S; Johnstone, D; Adams, FC; Lin, DNC; Neufeld, DA; Ostriker, EC

    2004-01-01

    Strong IR emission features at 3.3, 6.2, 7.7, 8.6, and 11.2 mum are a common characteristic of regions of massive star formation. These features are carried by large (similar to 50 C-atom) Polycyclic Aromatic Hydrocarbon molecules which are pumped by the strong FUV photon flux from these stars.

  4. FORMATION CONSTANTS AND THERMODYNAMIC ...

    African Journals Online (AJOL)

    , Ni(II), Cu(II) and Zn(II) ions has been ... A good deal of work has been reported on the preparation and structural investigation of. Schiff base ... Formation constants and thermodynamic parameters of Co, Ni, Cu and Zn complexes. Bull. Chem.

  5. Natural resources, redistribution and Human capital formation

    OpenAIRE

    Aguero, Jorge; Balcazar, Carlos Felipe; Maldonado, Stanislao; Ñopo, Hugo

    2016-01-01

    How do resource booms affect human capital accumulation? We exploit time and spatial variation generated by the commodity boom across local governments in Peru to measure the effect of natural resources on human capital formation. We explore the effect of both mining production and tax revenues on test scores, finding a substantial and statistically significant effect for the latter. Transfers to local governments from mining tax revenues are linked to an increase in math test scores of aroun...

  6. Planetesimal formation starts at the snow line

    Science.gov (United States)

    Drążkowska, J.; Alibert, Y.

    2017-12-01

    Context. The formation stage of planetesimals represents a major gap in our understanding of the planet formation process. Late-stage planet accretion models typically make arbitrary assumptions about planetesimal and pebble distribution, while dust evolution models predict that planetesimal formation is only possible at some orbital distances. Aims: We wish to test the importance of the water snow line in triggering the formation of the first planetesimals during the gas-rich phase of a protoplanetary disk, when cores of giant planets have to form. Methods: We connected prescriptions for gas disk evolution, dust growth and fragmentation, water ice evaporation and recondensation, the transport of both solids and water vapor, and planetesimal formation via streaming instability into a single one-dimensional model for protoplanetary disk evolution. Results: We find that processes taking place around the snow line facilitate planetesimal formation in two ways. First, because the sticking properties between wet and dry aggregates change, a "traffic jam" inside of the snow line slows the fall of solids onto the star. Second, ice evaporation and outward diffusion of water followed by its recondensation increases the abundance of icy pebbles that trigger planetesimal formation via streaming instability just outside of the snow line. Conclusions: Planetesimal formation is hindered by growth barriers and radial drift and thus requires particular conditions to take place. The snow line is a favorable location where planetesimal formation is possible for a wide range of conditions, but not in every protoplanetary disk model, however. This process is particularly promoted in large cool disks with low intrinsic turbulence and an increased initial dust-to-gas ratio. The movie attached to Fig. 3 is only available at http://www.aanda.org

  7. Crack Formation in Grouted Annular Composite

    DEFF Research Database (Denmark)

    Sørensen, Eigil V.

    The objective of the present analysis is to identify the reason for extensive crack formation which occurred during an annulus grouting performance test, to evaluate possible consequences of the cracking, and to recommend measures to be taken in order to avoid similar problems in the future....

  8. COMPETENCYTHE FORMATION FOR LIFE

    Directory of Open Access Journals (Sweden)

    Milagros Mederos-Piñeiro

    2016-07-01

    Full Text Available The formation of life competences is the result of a quality education that prepares students to meet the challenges of a fast moving world where equality and equal opportunities should constitute premises of education; training them is a challenge teachers to assume new generations contribute actively to a better world. In Cuba are important research on the formation of communication competences and self-regulated learning in primary school. The paper shows the result of an investigation that provides a methodology for the formation of life competences in primary school education, used as an essential pathway research activity. The methodological approach of research has a quantitative approach and an explanatory scope to establish and make sense of understanding the causal relationship between the direction of research activity and training of life competences. Theoretical, empirical and mathematical-statistical, for characterizing the initial state, processing of results and analysis: research methods are used. The application of the methodology for the formation of life competences makes teachers lead the teaching-learning process with a research and transforming teaching concept, where the school is the protagonist of their learning and causes changes in their performances, which are evident in the formed competences related to effective and affective communication; the solution of problems related to life; the use of means in obtaining the knowledge and the expression of a behavior consistent with school and social demands. The effectiveness of the methodology confirms that there is a causal relationship between the direction of research activity by teachers and the formation of life competences in school.

  9. Simulation of aquifer tests and ground-water flowpaths at the local scale in fractured shales and sandstones of the Brunswick Group and Lockatong Formation, Lansdale, Montgomery County, Pennsylvania

    Science.gov (United States)

    Goode, Daniel J.; Senior, Lisa A.

    2000-01-01

    The U.S. Geological Survey, as part of technical assistance to the U.S. Environmental Protection Agency, has constructed and calibrated models of local-scale ground-water flow in and near Lansdale, Pa., where numerous sources of industrial contamination have been consolidated into the North Penn Area 6 Superfund Site. The local-scale models incorporate hydrogeologic structure of northwest-dipping beds with uniform hydraulic properties identified in previous studies. Computations associated with mapping the dipping-bed structure into the three-dimensional model grid are handled by a preprocessor using a programmed geographic information system (GIS). Hydraulic properties are identified by calibration of the models using measured water levels during pumping and recovery from aquifer tests at three sites. Reduced flow across low-permeability beds is explicitly simulated. The dipping high-permeability beds are extensive in the strike direction but are of limited extent in the dip direction. This model structure yields ground-water-flow patterns characteristic of anisotropic aquifers; preferred flow is in the strike direction. The transmissivities of high-permeability beds in the local-scale models range from 142 to 1,900 ft2/d (feet squared per day) (13 to 177 m2/d). The hydraulic conductivities of low-permeability parts of the aquifer range from 9.6 x 10-4 to 0.26 ft/d (feet per day) (2.9 x 10-4 to 0.079 m/d). Storage coefficients and specific storage are very low, indicating the confined nature of the aquifer system. The calibrated models are used to simulate contributing areas of wells under alternative, hypothetical ground-water-management practices. Predictive contributing areas indicate the general characteristics of ground-water flow towards wells in the Lansdale area. Recharge to wells in Lansdale generally comes from infiltration near the well and over an area that extends upgradient from the well. The contributing areas for two wells pumping at 10 gal

  10. Ground-water data for the Nevada Test Site and selected other areas in South-Central Nevada, 1992--1993

    International Nuclear Information System (INIS)

    1995-01-01

    The US Geological Survey, in support of the US Department of Energy Environmental Restoration and Hydrologic Resources Management Programs, collects and compiles hydrogeologic data to aid in characterizing the regional and local ground-water flow systems underlying the Nevada Test Site and vicinity. This report presents selected ground-water data collected from wells and test holes at and in the vicinity of the Nevada Test Site. Depth-to-water measurements were made during water year 1993 at 55 sites at the Nevada Test Site and 43 regional sites in the vicinity of the Nevada Test Site. Depth to water ranged from 87.7 to 674.6 meters below land surface at the Nevada Test Site and from 6.0 to 444.7 meters below land surface at sites in the vicinity of the Nevada Test Site. Depth-to-water measurements were obtained using the wire-line, electric-tape, air-line, and steel-tape devices. Total measured ground-water withdrawal from the Nevada Test Site during the 1993 calendar year was 1,888.04 million liters. Annual ground-water withdrawals from 14 wells ranged from 0.80 million to 417.20 million liters. Tritium concentrations from four samples at the Nevada Test Site and from three samples in the vicinity of the Nevada Test Site collected during water year 1993 ranged from near 0 to 27,676.0 becquerels per liter and from near 0 to 3.9 becquerels per liter, respectively

  11. Test plan :

    Energy Technology Data Exchange (ETDEWEB)

    Dwyer, Stephen F.

    2013-05-01

    This test plan is a document that provides a systematic approach to the planned testing of rooftop structures to determine their actual load carrying capacity. This document identifies typical tests to be performed, the responsible parties for testing, the general feature of the tests, the testing approach, test deliverables, testing schedule, monitoring requirements, and environmental and safety compliance.

  12. Predictive Testing

    Science.gov (United States)

    ... you want to learn. Search form Search Predictive testing You are here Home Testing & Services Testing for ... you make the decision. What Is Predictive Genetic Testing Predictive genetic testing searches for genetic changes, or ...

  13. Pharmacogenomic Testing

    Science.gov (United States)

    ... you want to learn. Search form Search Pharmacogenomic testing You are here Home Testing & Services Testing for ... to fit your genetic makeup What Is Pharmacogenomic Testing? Pharmacogenomic testing is done before your healthcare provider ...

  14. Trichomonas Testing

    Science.gov (United States)

    ... C Cystic Fibrosis (CF) Gene Mutations Testing Cytomegalovirus (CMV) Tests D-dimer Dengue Fever Testing Des-gamma- ... Index of Screening Recommendations Not Listed? Not Listed? Newborn Screening Screening Tests for Infants Screening Tests for ...

  15. Plasma formation in TBR

    International Nuclear Information System (INIS)

    Del Bosco, E.

    1981-01-01

    In this work are presented and discussed results of the formation and equilibrium of the plasma current in TBR, a small tokamak, designed and contructed at the Instituto de Fisica of Universidade de Sao Paulo. The measured breakdown curves for H 2 , A and He are compared with the predictions of a simple model with reasonable agreement. The influence of stray magnetic fields in the plasma formation is investigated and conditions are chosen to facilitate the breakdown. The time profile of loop voltage and plasma current for shots with plasma equilibrium are shown. A comparison is made between experimental results and analytical-numerical model for tokamaks discharges with ohmic heating. Reasonable agreement is obtained when Z, effective atomic number, is assumed as a parameter. (Author) [pt

  16. A uniform format for ocular imaging devices.

    Science.gov (United States)

    Ishikawa, H; Liebmann, J M; Uji, Y; Ritch, R

    1999-01-01

    To develop a uniform file format of ocular imaging data, including, but not limited to, ultrasound biomicroscopy, optical coherence tomography, and nerve fiber analyzer, capable of being transmitted via Internet or intranet for collaborative research and telemedicine use. File filters were developed as dynamic link libraries (DLLs). These can read the original raw data format of each ocular imaging device. A data file format was also designed to describe these raw data uniformly in three different types of compression: noncompressed, run length compression, and differential pulse code modulation (DPCM). These three file formats were then tested in the following aspects: file size, speed of reading, and speed of writing. Run length compression failed to compress raw data, while DPCM compressed raw data successfully (DPCM. However, the actual time of reading and writing was fast enough (<0.6 s) for daily work regardless of file compression methods. The format designed has robust potential to be the standard file format for transmission of any ocular imaging raw data.

  17. Converting Taxonomic Descriptions to New Digital Formats

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2008-01-01

    Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

  18. Alkali metal hydride formation

    International Nuclear Information System (INIS)

    1976-01-01

    The present invention relates to a method of producing alkali metal hydrides by absorbing hydrogen gas under pressure into a mixture of lower alkyl mono amines and alkali metal alkyl amides selected from sodium and potassium amides formed from said amines. The present invention also includes purification of a mixture of the amines and amides which contain impurities, such as is used as a catalytic exchange liquid in the enrichment of deuterium, involving the formation of the alkali metal hydride

  19. Isothermal Martensite Formation

    DEFF Research Database (Denmark)

    Villa, Matteo

    are chosen to investigate time dependent martensite formation. Among them, a Fe-11wt%Ni-0.6wt%C model alloy and Fe-1.6wt%Cr-1wt%C (AISI 52100), Fe-17wt%Cr-7wt%Ni (AISI 631) and Fe-16wt%Cr-5wt%Ni (AISI 630) commercial steels. The investigation was performed with in situ magnetometry, dilatometry, synchrotron...

  20. Symbol Formation Reconsidered

    DEFF Research Database (Denmark)

    Wagoner, Brady

    2013-01-01

    begins with a brief outline and contextualization of the book as well as of the articles that this special issue comprises. The first two articles were written by contributors who were part of the Werner era at Clark University. They explore the key concepts of the organismic and development, and situate...... the organismic-developmental approach to fields only touched in Symbol formation, such as magical practices, social structures, pictures and gesture....

  1. Formation of TRAPPIST-1

    Science.gov (United States)

    Ormel, C. W.; Liu, B.; Schoonenberg, D.

    2017-09-01

    We present a model for the formation of the recently-discovered TRAPPIST-1 planetary system. In our scenario planets form in the interior regions, by accretion of mm to cm-size particles (pebbles) that drifted from the outer disk. This scenario has several advantages: it connects to the observation that disks are made up of pebbles, it is efficient, it explains why the TRAPPIST-1 planets are ˜Earth mass, and it provides a rationale for the system's architecture.

  2. Methemoglobin formation by paraquat.

    OpenAIRE

    Watanabe, Shinsaku; Ogata, Masana

    1982-01-01

    Paraquat is a broad spectrum herbicide known to be highly lethal to man and animals. Its toxicity is characterized by acute lung injury. Paraquat produces such toxic effects through the generation of the superoxide anion according to one proposed mechanism. The present experiment, methemoglobin formation was demonstrated after incubation of oxyhemoglobin with paraquat. The generation of the superoxide anion through the interaction of oxyhemoglobin with paraquat was suggested by chemiluminesce...

  3. Formate-assisted pyrolysis

    Science.gov (United States)

    DeSisto, William Joseph; Wheeler, Marshall Clayton; van Heiningen, Adriaan R. P.

    2015-03-17

    The present invention provides, among other thing, methods for creating significantly deoxygenated bio-oils form biomass including the steps of providing a feedstock, associating the feedstock with an alkali formate to form a treated feedstock, dewatering the treated feedstock, heating the dewatered treated feedstock to form a vapor product, and condensing the vapor product to form a pyrolysis oil, wherein the pyrolysis oil contains less than 30% oxygen by weight.

  4. THE ALLIANCE FORMATION PROCESS

    OpenAIRE

    Whipple, Judith M.; Frankel, Robert

    1998-01-01

    While interest in developing strategic alliances within the food system continues to increase, there remains considerable risk when firms adopt such a cooperative strategy. The risk is due in part to the lack of concrete guidelines that illustrate the steps or stages of alliance development and the important strategic and operational decisions required at each stage. The existence of such guidelines would facilitate alliance formation and enable managers and researchers to better understand a...

  5. Complexity and formative experiences

    Directory of Open Access Journals (Sweden)

    Roque Strieder

    2017-12-01

    Full Text Available The contemporaneity is characterized by instability and diversity calling into question certainties and truths proposed in modernity. We recognize that the reality of things and phenomena become effective as a set of events, interactions, retroactions and chances. This different frame extends the need for revision of the epistemological foundations that sustain educational practices and give them sense. The complex thinking is an alternative option for acting as a counterpoint to classical science and its reductionist logic and knowledge compartmentalization, as well as to answer to contemporary epistemological and educational challenges. It aims to associate different areas and forms of knowledge, without, however merge them, distinguishing without separating the several disciplines and instances of the realities. This study, in theoretical references, highlights the relevance of complex approaches to support formative experiences because also able to produce complexities in reflections about educational issues. We conclude that formative possibilities from complexity potentialize the resignification of human’s conception and the understanding of its singularity in interdependence; The understanding that pedagogical and educational activities is a constant interrogation about the possibilities of knowing the knowledge and reframe learning, far beyond knowing its functions and utilitarian purposes; and, as a formative possibility, places us on the trail of responsibility, not as something eventual, but present and indicative of freedom to choose to stay or go beyond.

  6. Terrestrial planet formation.

    Science.gov (United States)

    Righter, K; O'Brien, D P

    2011-11-29

    Advances in our understanding of terrestrial planet formation have come from a multidisciplinary approach. Studies of the ages and compositions of primitive meteorites with compositions similar to the Sun have helped to constrain the nature of the building blocks of planets. This information helps to guide numerical models for the three stages of planet formation from dust to planetesimals (~10(6) y), followed by planetesimals to embryos (lunar to Mars-sized objects; few 10(6) y), and finally embryos to planets (10(7)-10(8) y). Defining the role of turbulence in the early nebula is a key to understanding the growth of solids larger than meter size. The initiation of runaway growth of embryos from planetesimals ultimately leads to the growth of large terrestrial planets via large impacts. Dynamical models can produce inner Solar System configurations that closely resemble our Solar System, especially when the orbital effects of large planets (Jupiter and Saturn) and damping mechanisms, such as gas drag, are included. Experimental studies of terrestrial planet interiors provide additional constraints on the conditions of differentiation and, therefore, origin. A more complete understanding of terrestrial planet formation might be possible via a combination of chemical and physical modeling, as well as obtaining samples and new geophysical data from other planets (Venus, Mars, or Mercury) and asteroids.

  7. Effect of Formative Quizzes on Teacher Candidates' Learning in General Chemistry

    Science.gov (United States)

    Yalaki, Yalcin; Bayram, Zeki

    2015-01-01

    Formative assessment or assessment for learning is one of the most emphasized educational innovations around the world. Two of the common strategies that could be used in formative assessment are use of summative tests for formative purposes and comment only marking. We utilized these strategies in the form of formative quizzes in a general…

  8. Aromatics oxidation and soot formation in flames

    Energy Technology Data Exchange (ETDEWEB)

    Howard, J.B.; Pope, C.J.; Shandross, R.A.; Yadav, T. [Massachusetts Institute of Technology, Cambridge (United States)

    1993-12-01

    This project is concerned with the kinetics and mechanisms of aromatics oxidation and soot and fullerenes formation in flames. The scope includes detailed measurements of profiles of stable and radical species concentrations in low-pressure one-dimensional premixed flames. Intermediate species identifications and mole fractions, fluxes, and net reaction rates calculated from the measured profiles are used to test postulated reaction mechanisms. Particular objectives are to identify and to determine or confirm rate constants for the main benzene oxidation reactions in flames, and to characterize fullerenes and their formation mechanisms and kinetics.

  9. Testing 1985

    Science.gov (United States)

    Hunter, William J.; And Others

    1985-01-01

    Presents articles on test anxiety, personality tests, history of tests and benefits to be derived from their use, tests as tools in career decision-making, temperament needs for certain jobs (as determined by personality tests), interest inventories, testing exceptional students, and testing to evaluate vocational needs of special needs groups.…

  10. Is Team Formation Gender Neutral? Evidence from Coauthorship Patterns

    OpenAIRE

    Boschini, Anne; Sjögren, Anna

    2006-01-01

    We investigate if voluntary team formation is gender neutral. To this end, we model team formation as a random matching process influenced by the agents' preferences for team size and gender composition and derive how team formation depends on the gender ratio in the population of prospective team mates. We then test if the coauthorship pattern in articles published 1991-2002 in three top Economics journals is gender neutral, exploiting the variation in female presence across subfields of Eco...

  11. Formation damage due to fines migration and its remedial methods

    Directory of Open Access Journals (Sweden)

    Sabry Kasem Galal

    2016-12-01

    Well testing analysis and well performance analysis were done to detect formation damage and provide an overall measure of formation damage. Laboratory core flood tests had been used to determine the causes, degree, and extent of damage. Scanning electron microscopy (SEM was used to analyze the rock samples used for the core flood test before and after the test. Core flood test had been done to evaluate the effect of acid on improving and curing damaged cores. Matrix acid stimulation on a case study from the studied field was evaluated.

  12. The Relation Between Item Format and the Structure of the Eysenck Personality Inventory

    Science.gov (United States)

    Velicer, Wayne F.; Stevenson, John F.

    1978-01-01

    A Likert seven-choice response format for personality inventories allows finer distinctions by subjects than the traditional two-choice format. The Eysenck Personality Inventory was employed in the present study to test the hypothesis that use of the expanded format would result in a clearer and more accurate indication of test structure.…

  13. Sweet Lake Geopressured-geothermal Project, Magma Gulf-Technadril/DOE Amoco Fee. Volume II. Surface installations reservoir testing. Annual report, February 28, 1981-February 10, 1982

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, K.S. (ed.)

    1984-01-01

    The Magma Gulf-Technadril/Department of Energy Amoco Fee No. 1 (production) and salt water disposal wells were drilled in the period from August, 1980 to February 1981. Surface facilities were designed and constructed during March-June 1981. Flow testing began in June 1981 and continued until February, 1982. The Miogypsinoides interval contains seven discrete sands in the test well. These sands have been numbered 1 to 7, beginning at the top of the sequence. Data from wireline logs and core samples suggested that the first zone to be perforated should be Sand 5. Because of its high porosity and permeability, Sand 5 was thought to contain almost 50% of the total hydraulic capacity of the well. Flow testing of Sand 5 was performed in three stages, each of which is fully described in this report. Phase I was designed as an initial clean-up flow and a reservoir confirmation test. Phase II consisted of the reservoir limit determination test and lasted 17 days. Boundaries were confirmed which suggest that the Sweet Lake reservoir is fairly narrow, with boundaries on three sides, but is open in one direction with no closure for at least 4-1/4 miles. These boundaries approximate the shape of the graben in which the test well was drilled, but may or may not be directly related to the major faults forming the graben. Phase III testing was planned to be a long-term test at commercial design rates. Although Sand 5 alone would not support such rates, long-term production was demonstrated. Additional research not supported by DOE funding was also performed during the period covered by this report. This research, consisting of mud logging, micropaleontology, organic geochemistry, core analysis, and rock mechanics, is summarized in this report.

  14. Standard test method for creep-fatigue testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method covers the determination of mechanical properties pertaining to creep-fatigue deformation or crack formation in nominally homogeneous materials, or both by the use of test specimens subjected to uniaxial forces under isothermal conditions. It concerns fatigue testing at strain rates or with cycles involving sufficiently long hold times to be responsible for the cyclic deformation response and cycles to crack formation to be affected by creep (and oxidation). It is intended as a test method for fatigue testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. The cyclic conditions responsible for creep-fatigue deformation and cracking vary with material and with temperature for a given material. 1.2 The use of this test method is limited to specimens and does not cover testing of full-scale components, structures, or consumer products. 1.3 This test method is primarily ...

  15. Liposome formation in microgravity

    Science.gov (United States)

    Claassen, D. E.; Spooner, B. S.

    Liposomes are artificial vesicles with a phospholipid bilayer membrane. The formation of liposomes is a self-assembly process that is driven by the amphipathic nature of phospholipid molecules and can be observed during the removal of detergent from phospholipids dissolved in detergent micelles. As detergent concentration in the mixed micelles decreases, the non-polar tail regions of phospholipids produce a hydrophobic effect that drives the micelles to fuse and form planar bilayers in which phospholipids orient with tail regions to the center of the bilayer and polar head regions to the external surface. Remaining detergent molecules shield exposed edges of the bilayer sheet from the aqueous environment. Further removal of detergent leads to intramembrane folding and membrane vesiculation, forming liposomes. We have observed that the formation of liposomes is altered in microgravity. Liposomes that were formed at 1-g did not exceed 150 nm in diameter, whereas liposomes that were formed during spaceflight exhibited diameters up to 2000 nm. Using detergent-stabilized planar bilayers, we determined that the stage of liposome formation most influenced by gravity is membrane vesiculation. In addition, we found that small, equipment-induced fluid disturbances increased vesiculation and negated the size-enhancing effects of microgravity. However, these small disturbances had no effect on liposome size at 1-g, likely due to the presence of gravity-induced buoyancy-driven fluid flows (e.g., convection currents). Our results indicate that fluid disturbances, induced by gravity, influence the vesiculation of membranes and limit the diameter of forming liposomes.

  16. Formation control of AAUSHIP

    DEFF Research Database (Denmark)

    Østergaard, Nick; Dam, Jeppe; Larsen, Jesper Abildgaard

    2015-01-01

    Many maritime mapping tasks are today carried out by large research ships, which are very costly to operate. As a way to overcome this, a number of small surveying vessels have been developed called AAUSHIP. In order to efficiently map the an area with such smaller vessels, it is important that s...... that several vessels are able to corporate on the task at hand. In this paper, the developed formation control strategy for the AAUSHIP series of vessels is presented, along with simulation results, which confirms, that the algorithm works as intended....

  17. Bouyei word formation

    Directory of Open Access Journals (Sweden)

    Attasith Boonsawasd

    2012-12-01

    Full Text Available The Bouyei language is divided into three vernaculars, the southern vernacular, the central vernacular and the southwestern vernacular. This paper aims to describe the lexicology of the southern vernacular of the Bouyei language focusing on word formation process. Bouyei words are formed by affixing, compounding and reduplicating. First, the affixation consists of prefixing and suffixing. Infixing is not found in this language. Second, the compound is divided into the semantic and syntactic compound. Finally, the reduplication is divided into the simple and complex reduplication. The simple reduplication is normally used to emphasize the meaning of the root or to indicate plurality.

  18. Democracy and formation

    DEFF Research Database (Denmark)

    Huggler, Jørgen

    to nature, Schlegel appeals to culture and political experience and political formation, in order to make the world more peaceful. He opposes with heavy arguments the Kantian distinction between republicanism and democracy. Instead he gives quite good reasons for a more important distinction between...... of the structure of political autonomy in a political social contract (Ingeborg Mauss). Against Kant, the thinker of political continuity, Schlegel presents historically well informed reflections on the beginning and the end of political legitimacy. Dictatorship can be legitimate, states of emergency are found...

  19. Modeling Chondrule Formation

    Science.gov (United States)

    Eisenhour, D. D.; Buseck, P. R.

    1995-09-01

    Over the last several decades considerable data on chondrule sizes, compositions, and textures has been collected [1]; experimental studies have greatly improved our understanding of the conditions required to produce chondrule compositions and textures [2]; and models of energetic nebular processes have provided insight into mechanisms by which chondrules may have formed [3]. While much work remains in each of these areas, the information presently available is sufficient to allow the construction of simple numerical models of chondrule formation. We have constructed a computer algorithm to investigate the consequences of forming chondrules under a variety of conditions. Variables that are considered include: 1) the mechanism of heating (e.g., EM radiation, aerodynamic drag, collisions with energetic particles), 2) peak chondrule temperature, 3) heat-source geometry, 4) pre-chondrule dust aggregate size distributions, 5) dust aggregate compositional distributions, 6) chondrule solidus and liquidus temperatures, 7) kinetic barriers to melting, and 8) the duration of heating. Output includes the size distributions and relative abundances of PO, PP, POP, BO, and NP chondrules. Given the uncertainties in the input variables, the primary purpose of the code is not to construct a single (and necessarily somewhat arbitrary) model of chondrule formation, but rather to elucidate the differences in chondrule properties associated with various sets of formation conditions. Results from a number of simulations using a variety of input parameters illustrate the importance of both composition and peak temperature on the proportion of porphyritic to non-porphyritic chondrules produced. Also apparent is the influence of the mechanism of heating on the relative size distributions of chondrule textural types. Results indicate that specific heating mechanisms require unique sets of associated conditions to account for the observed properties of chondrules. These unique sets of

  20. Testing structure formation in the universe via coupled matter fluids ...

    African Journals Online (AJOL)

    We present results from a new framework in which the matter fluid is split into a strongly clustered “halo” component and a weakly clustered “free” component accreted by the haloes. The interaction is modelled using a simple function of the matter density that mimics recently published results from halo theory of N-body ...

  1. Video and HTML: Testing Online Tutorial Formats with Biology Students

    Science.gov (United States)

    Craig, Cindy L.; Friehs, Curt G.

    2013-01-01

    This study compared two common types of online information literacy tutorials: a streaming media tutorial using animation and narration and a text-based tutorial with static images. Nine sections of an undergraduate biology lab class (234 students total) were instructed by a librarian on how to use the BIOSIS Previews database. Three sections…

  2. Coombs test

    Science.gov (United States)

    Direct antiglobulin test; Indirect antiglobulin test; Anemia - hemolytic ... No special preparation is necessary for this test. ... There are 2 types of the Coombs test: Direct Indirect The direct ... that are stuck to the surface of red blood cells. Many diseases ...

  3. Ham test

    Science.gov (United States)

    Acid hemolysin test; Paroxysmal nocturnal hemoglobinuria - Ham test; PNH - Ham test ... BJ. In: Chernecky CC, Berger BJ, eds. Laboratory Tests and Diagnostic Procedures . 6th ed. Philadelphia, PA: Elsevier ...

  4. Test Anxiety

    Science.gov (United States)

    ... Safe Videos for Educators Search English Español Test Anxiety KidsHealth / For Teens / Test Anxiety What's in this ... with their concentration or performance. What Is Test Anxiety? Test anxiety is actually a type of performance ...

  5. Urodynamic Testing

    Science.gov (United States)

    ... Urinary Tract Imaging Urodynamic Testing Virtual Colonoscopy Urodynamic Testing What is the urinary tract? The urinary tract ... view of the urinary tract What is urodynamic testing? Urodynamic testing is any procedure that looks at ...

  6. Susceptibility Testing

    Science.gov (United States)

    ... Gene Mutations Testing Cytomegalovirus (CMV) Tests D-dimer Dengue Fever Testing Des-gamma-carboxy prothrombin (DCP) DHEAS ... can develop resistance to the drugs used to treat them, but that type of testing is performed ...

  7. FORMATIVE AND REFLECTIVE MODELS IN MARKETING RESEARCH

    Directory of Open Access Journals (Sweden)

    Claudia Ioana CIOBANU

    2017-06-01

    Full Text Available Compliance with the construct validity criteria is necessary for the correct assessment of the research in terms of quality and for further development of the marketing models. The identification of formative and reflective constructs as well as the correct testing of their validity and reliability are important methodological steps for marketing research as described in this article. The first part defines the reflective and the formative constructs and highlighst their particularities by analysing the theoretical criteria that differentiate them. In the second part of the study aspects of validity and trust for the formative and reflective constructs are presented as well as some empirical considerations from research literature regarding their measurement.

  8. Geological and geochemical characterization of the Lower Cretaceous Pearsall Formation, Maverick Basin, south Texas: A future shale gas resource?

    Science.gov (United States)

    Hackley, Paul C.

    2012-01-01

    As part of an assessment of undiscovered hydrocarbon resources in the northern Gulf of Mexico onshore Mesozoic section, the U.S. Geological Survey (USGS) evaluated the Lower Cretaceous Pearsall Formation of the Maverick Basin, south Texas, as a potential shale gas resource. Wireline logs were used to determine the stratigraphic distribution of the Pearsall Formation and to select available core and cuttings samples for analytical investigation. Samples used for this study spanned updip to downdip environments in the Maverick Basin, including several from the current shale gas-producing area of the Pearsall Formation.The term shale does not adequately describe any of the Pearsall samples evaluated for this study, which included argillaceous lime wackestones from more proximal marine depositional environments in Maverick County and argillaceous lime mudstones from the distal Lower Cretaceous shelf edge in western Bee County. Most facies in the Pearsall Formation were deposited in oxygenated environments as evidenced by the presence of biota preserved as shell fragments and the near absence of sediment laminae, which is probably caused by bioturbation. Organic material is poorly preserved and primarily consists of type III kerogen (terrestrial) and type IV kerogen (inert solid bitumen), with a minor contribution from type II kerogen (marine) based on petrographic analysis and pyrolysis. Carbonate dominates the mineralogy followed by clays and quartz. The low abundance and broad size distribution of pyrite are consistent with the presence of oxic conditions during sediment deposition. The Pearsall Formation is in the dry gas window of hydrocarbon generation (mean random vitrinite reflectance values, Ro = 1.2–2.2%) and contains moderate levels of total organic carbon (average 0.86 wt. %), which primarily resides in the inert solid bitumen. Solid bitumen is interpreted to result from in-situ thermal cracking of liquid hydrocarbon generated from original type II kerogen

  9. The Planet Formation Imager

    Science.gov (United States)

    Kraus, S.; Buscher, D. F.; Monnier, J. D.; PFI Science, the; Technical Working Group

    2014-04-01

    Among the most fascinating and hotly-debated areas in contemporary astrophysics are the means by which planetary systems are assembled from the large rotating disks of gas and dust which attend a stellar birth. Although important work is being done both in theory and observation, a full understanding of the physics of planet formation can only be achieved by opening observational windows able to directly witness the process in action. The key requirement is then to probe planet-forming systems at the natural spatial scales over which material is being assembled. By definition, this is the so-called Hill Sphere which delineates the region of influence of a gravitating body within its surrounding environment. The Planet Formation Imager project has crystallized around this challenging goal: to deliver resolved images of Hill-Sphere-sized structures within candidate planet-hosting disks in the nearest star-forming regions. In this contribution we outline the primary science case of PFI and discuss how PFI could significantly advance our understanding of the architecture and potential habitability of planetary systems. We present radiation-hydrodynamics simulations from which we derive preliminary specifications that guide the design of the facility. Finally, we give an overview about the interferometric and non-interferometric technologies that we are investigating in order to meet the specifications.

  10. Urbanization and slum formation.

    Science.gov (United States)

    Ooi, Giok Ling; Phua, Kai Hong

    2007-05-01

    The formation of slums need not be inevitable with rapid urbanization. Such an argument appears to be contradicted by evidence of large slum populations in a large number of developing countries and particularly in rapidly urbanizing regions like Asia. The evidence discussed suggests that city authorities faced with rapid urban development lack the capacity to cope with the diverse demands for infrastructural provision to meet economic and social needs. Not only are strategic planning and intervention major issues in agenda to manage rapid urbanization, but city governments are not effectively linking the economic development trajectory to implications for urban growth and, hence, housing needs. In the following discussion, a case study is presented in support of the argument that city governments have to first recognize and then act to establish the link that is crucial between economic development, urban growth, and housing. This is the agendum that has been largely neglected by city and national governments that have been narrowly focused on economic growth with the consequent proliferation of slum formation as a housing solution.

  11. High precision relative position sensing system for formation flying spacecraft

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop and test an optical sensing system that provides high precision relative position sensing for formation flying spacecraft.  A high precision...

  12. Proof of feasibility of the through casing resistivity technology

    Energy Technology Data Exchange (ETDEWEB)

    Vail, Dr. W. Banning; Momii, Steven T.

    2000-06-21

    This project is to definitely prove that the resistivity of geological formations can be measured from within cased wells and to license the relevant patents and technology to major wireline service companies.

  13. Overview of pressure drawdown production test results for the Japex/JNOC/GSC Mallik 5L-38 gas hydrate research well

    Energy Technology Data Exchange (ETDEWEB)

    Hancock, S.; Carle, D. [APA Petroleum Engineering Ltd., Calgary, AB (Canada); Dallimore, S. [Geological Survey of Canada, Sidney, BC (Canada); Collett, T. [United States Geological Survey, Denver, CO (United States); Satoh, T. [Japan Petroleum Exploration Co. Ltd., Tokyo (Japan); Inoue, T. [Japan National Oil Corp., Chiba (Japan)

    2004-07-01

    Schlumberger's Modular Dynamic Tester (MDT) cased hole wireline tool was used during a pressure drawdown production test at the Mallik 5L-38 well to successfully test 3 separate hydrate intervals as well as free gas and water zones. The MDT test was initially performed to reduce reservoir pressure below the hydrate stability point, and to shut-in and observe the pressure build-up. It was assumed that the rate of gas production would be too small to measure, so the rate of hydrate dissociation would have to be inferred from changing pressure versus time data. Two important phenomena were observed during the hydrate tests: (1) free gas was produced on a steady state basis following the initial clean-up flow of water, and (2) the pressure response upon shut-in displayed porous media effects and indicated both flow contribution and pressure effects beyond the surface area of the hydrate open to the wellbore. In response to these observations, the MDT test procedures for the hydrate intervals were changed to include multiple flow and build-up periods, as well as injection and pressure fall-off periods. The factors that should be considered in interpreting the pressure transient data obtained during the MDT tests of the hydrate intervals include wellbore and perforation geometry with respect to the pressure affected area in the reservoir; radial and time dependent hydrate saturation changes which result in dynamic multiphase fluid flow, changing relative permeability, and changing system compressibility; the addition of free gas during the shut-in periods from continued hydrate dissociation; and the changing presence and character of boundaries due either to localized fractures or the limit of the hydrate dissociation front. Since analytical pressure transient analysis software cannot incorporate such dynamic reservoir parameters, conventional analytical techniques were used to evaluate the test data. 1 fig.

  14. Logging in the campus: borehole research and monitoring in a test hole in Barcelona (Spain)

    Science.gov (United States)

    Jurado, M. J.; Crespo, J.; Espallargas, R.

    2012-04-01

    Almera-1 hole was drilled for research purposes in the University of Barcelona campus area. The hole is 214m deep and was drilled in Quaternary to Paleozoic rocks in a urban area, next to the Institute of Earth Sciences (CSIC) borehole research lab. The main objectives for drilling a research hole were both the study of the poorly known subsurface geology and structure in this urban area and the construction of a dedicated infrastructure for logging tools tests, calibrations and long term monitoring. A direct connection to the lab was built to facilitate long term measuring experiments tool powering and data monitoring. A second auxiliary hole, Almera-2 50m deep was drilled to carry out cross-hole and tomographic experiments and hydrological monitoring. The upper section of Almera-1 hole is cased with PVC and the lowermost is an open hole section in paleozoic rock. The entire hole was logged in open hole mode (before casing) and also after the hole was cased in order to study the effect of the PVC casing on different logging tools responses (total and spectral gamma radioactivity through casing, acoustic televiewer through casing, full wave sonic through casing and magnetic susceptibility through casing). The comparison shows the effect on each of these tools response of the PVC casing. Also how the tools responses are more or less affected by the attenuation caused by the PVC of the rock signal and how this is more or less critical in the diverse lithologies represented in the Almera-1 hole. Wireline drilling was used to obtain best core recovery and to carry out log-core comparative analyses for logging tool response calibration and log-core correlation. The results obtained in the study of gamma ray (total and spectral), magnetic susceptibility and acoustic petrophysics are shown.

  15. The multifaceted planetesimal formation process

    DEFF Research Database (Denmark)

    Johansen, Anders; Blum, Jürgen; Tanaka, Hidekazu

    2013-01-01

    -Neptunian objects and comets provide a unique record of the physical conditions in the solar nebula. Debris from planetesimal collisions around other stars signposts that the planetesimal formation process, and hence planet formation, is ubiquitous in the Galaxy. The planetesimal formation stage extends from...

  16. Designing for informed group formation

    DEFF Research Database (Denmark)

    Nicolajsen, Hanne Westh; Juel Jacobsen, Alice; Riis, Marianne

    2012-01-01

    A new design ―project preparation‖ preparing for the group formation in problem based project work is proposed and investigated. The main problem is to overcome group formation based on existing relations. The hypothesis is that theme development and group formation are somewhat counterproductive...

  17. Restoring formation after leaching process

    International Nuclear Information System (INIS)

    Barrett, R.B.

    1983-01-01

    A method of restoring a formation which had uranium and other mineral values extracted by an alkaline lixiviant comprises introducing a source of phosphate in an amount sufficient to lower the level of soluble uranium compounds below that previously existing in the formation by the formation of insoluble uranium phosphate compounds

  18. Performance of Different Acids on Sandstone Formations

    Directory of Open Access Journals (Sweden)

    M. A. Zaman

    2013-12-01

    Full Text Available Stimulation of sandstone formations is a challenging task, which involves several chemicals and physical interactions of the acid with the formation. Some of these reactions may result in formation damage. Mud acid has been successfully used to stimulate sandstone reservoirs for a number of years. It is a mixture of hydrofluoric (HF and hydrochloric (HCl acids designed to dissolve clays and siliceous fines accumulated in the near-wellbore region. Matrix acidizing may also be used to increase formation permeability in undamaged wells. The change may be up to 50% to 100% with the mud acid. For any acidizing process, the selection of acid (Formulation and Concentration and the design (Pre-flush, Main Acid, After-flush is very important. Different researchers are using different combinations of acids with different concentrations to get the best results for acidization. Mainly the common practice is combination of Hydrochloric Acid – Hydrofluoric with Concentration (3% HF – 12% HCl. This paper presents the results of a laboratory investigation of Orthophosphoric acid instead of hydrochloric acid in one combination and the second combination is Fluoboric and formic acid and the third one is formic and hydrofluoric acid. The results are compared with the mud acid and the results calculated are porosity, permeability, and FESEM Analysis and Strength tests. All of these new combinations shows that these have the potential to be used as acidizing acids on sandstone formations.

  19. Subcontact Lens Bubble Formation under Low Atmospheric Pressure Conditions.

    Science.gov (United States)

    1986-08-01

    of subcontact lens bubble formation under scleral lenses at altitudes greater than 18,000 ft. Later, after many advances in contact lens fitting and...Reported here are the results of contact lens bubble studies with soft hydrophilic nd rigid gas-permeable lenses . Testing was accomplished in simulated...ccurred at altitudes greater than 20,000 ft. For soft contact lenses , bubble formation was etected in 22 of 92 eyes tested, and occurred at altitudes

  20. Recipes for planet formation

    Science.gov (United States)

    Meyer, Michael R.

    2009-11-01

    Anyone who has ever used baking soda instead of baking powder when trying to make a cake knows a simple truth: ingredients matter. The same is true for planet formation. Planets are made from the materials that coalesce in a rotating disk around young stars - essentially the "leftovers" from when the stars themselves formed through the gravitational collapse of rotating clouds of gas and dust. The planet-making disk should therefore initially have the same gas-to-dust ratio as the interstellar medium: about 100 to 1, by mass. Similarly, it seems logical that the elemental composition of the disk should match that of the star, reflecting the initial conditions at that particular spot in the galaxy.

  1. Determinants for gallstone formation

    DEFF Research Database (Denmark)

    Shabanzadeh, Daniel Monsted; Sorensen, Lars Tue; Jørgensen, Torben

    2016-01-01

    associations were found for blood pressure, smoking, alcohol consumption, HDL cholesterol, or triglycerides in meta-analyses. Conclusions: Age, female sex, BMI, non-HDL cholesterol, and polyps are independent determinants for gallstone formation. Incident gallstones and the metabolic syndrome share common risk...... on a prospective protocol, a systematic review of the literature was performed identifying all articles dealing with determinants of incident gallstones. Meta-analyses of comparable determinants were performed through fixed effect models. Results: Participants with no gallstones at baseline and with at least one...... re-examination were followed-up completely (mean 11.6 years, N = 2848). The overall cumulative incidence of gallstones was 0.60% per year. Independent positive determinants for incident gallstones were age, female sex, non-high density lipoprotein (non-HDL) cholesterol, and gallbladder polyps...

  2. Formation fracturing with foam

    Energy Technology Data Exchange (ETDEWEB)

    Blauer, R.E.; Kohlhaas, C.A.

    1974-01-01

    Over 60 wells have been treated with hydraulic fracturing techniques, with foam as the fracturing fluid. These foams contained as much as 95% gaseous phase; most treatments used foams with gas contents in the 65% to 85% range. Foam has several desirable properties for use as a fracturing fluid: high sand-carrying and sand-suspending capability, low fluid loss, low hydrostatic head, low pressure drops due to friction, quick fluid recovery, low formation damage, and no reduction of fracture conductivity due to fluid ingredients. Most applications of foam as a fracturing fluid have been in low permeability gas reservoirs. However, several oil reservoirs also have been successfully treated. Cost of the treatment is approx. the same or slightly less than a treatment with conventional fluids of comparable volume and rate. (25 refs.)

  3. Standardizing exchange formats

    International Nuclear Information System (INIS)

    Lemmel, H.D.; Schmidt, J.J.

    1992-01-01

    An international network of co-operating data centres is described who maintain identical data bases which are simultaneously updated by an agreed data exchange procedure. The agreement covers ''data exchange formats'' which are compatible to the centres' internal data storage and retrieval systems which remain different, optimized at each centre to the available computer facilities and to the needs of the data users. Essential condition for the data exchange is an agreement on common procedures for the data exchange is an agreement on common procedures for the data compilation, including critical data analysis and validation. The systems described (''EXFOR'', ''ENDF'', ''CINDA'') are used for ''nuclear reaction data'', but the principles used for data compilation and exchange should be valid also for other data types. (author). 24 refs, 4 figs

  4. Report formatting in laboratory medicine - a call for harmony.

    Science.gov (United States)

    Jones, Graham R D; Legg, Michael

    2018-04-19

    The results of medical laboratory testing are only useful if they lead to appropriate actions by medical practitioners and/or patients. An underappreciated component of the medical testing process is the transfer of the information from the laboratory report into the reader's brain. The format of laboratory reports can be determined by the testing laboratory, which may issue a formatted report, or by electronic systems receiving information from laboratories and controlling the report format. As doctors can receive information from many laboratories, interpreting information from reports in a safe and rapid manner is facilitated by having similar report layouts and formats. Using Australia as an example, there is a wide variation in report formats in spite of a body of work to define standards for reporting. In addition to standardising of report formats, consideration needs to be given to optimisation of report formatting to facilitate rapid and unambiguous reading of the report and also interpretation of the data. Innovative report formats have been developed by some laboratories; however, wide adoption has not followed. The need to balance uniformity of reporting with appropriate innovation is a challenge for safe reporting of laboratory results. This paper discusses the current status and opportunity for improvement in safety and efficiency of the reading of laboratory reports, using current practise and developments in Australia as examples.

  5. Reconfigurable Digital Coherent Receiver for Hybrid Optical Fiber/Wireless Metro-Access Networks

    DEFF Research Database (Denmark)

    Arlunno, Valeria; Guerrero Gonzalez, Neil; Caballero Jambrina, Antonio

    Single reconfigurable DSP coherent receiver is experimentally demonstrated for mixed-format and bit-rates including QPSK, OFDM, IR-UWB for wireline and wireless signal types. Successful transmission and detection over a deployed fiber link is achieved.......Single reconfigurable DSP coherent receiver is experimentally demonstrated for mixed-format and bit-rates including QPSK, OFDM, IR-UWB for wireline and wireless signal types. Successful transmission and detection over a deployed fiber link is achieved....

  6. Influence of Streptococcus mutans on Enterococcus faecalis biofilm formation.

    Science.gov (United States)

    Deng, Dong Mei; Hoogenkamp, Michel A; Exterkate, Rob A M; Jiang, Lei Meng; van der Sluis, Lucas W M; Ten Cate, Jacob M; Crielaard, Wim

    2009-09-01

    An important virulence factor of Enterococcus faecalis is its ability to form biofilms. Most studies on biofilm formation have been carried out by using E. faecalis monocultures. Given the polymicrobial nature of root canal infections, it is important to understand biofilm formation of E. faecalis in the presence of other microorganisms. Eight clinical strains of E. faecalis were tested for biofilm formation on hydroxyapatite disks in the presence and absence of a Streptococcus mutans biofilm. Significantly more E. faecalis viable cells were found in biofilms in the presence of S. mutans. This phenomenon was, however, strain-dependent. Of the 8 strains tested, biofilm formation of strains AA-OR34, ER5/1, and V583 was not influenced by S. mutans biofilms. The results from this study, especially the strain difference, underline the importance of studying biofilm formation in a more realistic multispecies setting.

  7. Repository tunnel construction in deep clay formations

    International Nuclear Information System (INIS)

    Clarke, B.G.; Mair, R.J.; Taylor, R.N.

    1992-01-01

    One of the objects of the Hades project at Mol, Belgium has been to evaluate the feasibility of construction of a deep repository in the Boom clay formation at depth of approximately 225 metres. The main objective of the present project was to analyse and interpret the detailed geotechnical measurements made around the Hades trial shaft and tunnel excavations and evaluate the safety of radioactive waste disposal in a repository facility in deep clay formations. Plasticity calculations and finite element analyses were used which gave results consistent with the in-situ measurements. It was shown that effective stress analysis could successfully predict the observed field behaviour. Correct modelling of the small-strain stiffness of the Boom clay was essential if reasonable predictions of the pore pressure response due to construction are to be made. The calculations undertaken indicated that, even in the long term, the pressures on the test drift tunnel lining are likely to be significantly lower than the overburden pressure. Larger long-term tunnel lining pressures are predicted for impermeable linings. A series of laboratory stress path tests was undertaken to determine the strength and stiffness characteristics of the Boom clay. The tests were conducted at appropriate effective stress levels on high-quality samples retrieved during construction of the test drift. The apparatus developed for the testing is described and the results discussed. The development of a self boring retracting pressure-meter is described. This novel in-situ testing device was specifically designed to determine from direct measurements the convergence/confinement curve relevant to tunnelling in clay formations. 44 refs., 60 figs., 3 tabs

  8. Mechanisms of formation damage in matrix-permeability geothermal wells

    Energy Technology Data Exchange (ETDEWEB)

    Bergosh, J.L.; Wiggins, R.B.; Enniss, D.O.

    1982-04-01

    Tests were conducted to determine mechanisms of formation damage that can occur in matrix permeability geothermal wells. Two types of cores were used in the testing, actual cores from the East Mesa Well 78-30RD and cores from a fairly uniform generic sandstone formation. Three different types of tests were run. The East Mesa cores were used in the testing of the sensitivity of core to filtrate chemistry. The tests began with the cores exposed to simulated East Mesa brine and then different filtrates were introduced and the effects of the fluid contrast on core permeability were measured. The East Mesa cores were also used in the second series of tests which tested formation sandstone cores were used in the third test series which investigated the effects of different sizes of entrained particles in the fluid. Tests were run with both single-particle sizes and distributions of particle mixes. In addition to the testing, core preparation techniques for simulating fracture permeability were evaluated. Three different fracture formation mechanisms were identified and compared. Measurement techniques for measuring fracture size and permeability were also developed.

  9. String test

    Science.gov (United States)

    Duodenal parasites test; Giardia - string test ... To have this test, you swallow a string with a weighted gelatin capsule on the end. The string is pulled out 4 hours later. Any bile , blood, or mucus attached to ...

  10. Laboratory Tests

    Science.gov (United States)

    Laboratory tests check a sample of your blood, urine, or body tissues. A technician or your doctor ... compare your results to results from previous tests. Laboratory tests are often part of a routine checkup ...

  11. Allergy Testing

    Science.gov (United States)

    ... Library ▸ Allergy Library ▸ Allergy testing TTR Share | Allergy Testing If you have an allergy, your immune system ... to avoid contact with the pet if allergy testing shows an allergy to dust mites but not ...

  12. Pinworm test

    Science.gov (United States)

    Oxyuriasis test; Enterobiasis test; Tape test ... When a person has a pinworm infection, adult pinworms live in the intestine and colon. At night, the female adult worms deposit their eggs outside the rectum ...

  13. Randomization tests

    CERN Document Server

    Edgington, Eugene

    2007-01-01

    Statistical Tests That Do Not Require Random Sampling Randomization Tests Numerical Examples Randomization Tests and Nonrandom Samples The Prevalence of Nonrandom Samples in Experiments The Irrelevance of Random Samples for the Typical Experiment Generalizing from Nonrandom Samples Intelligibility Respect for the Validity of Randomization Tests Versatility Practicality Precursors of Randomization Tests Other Applications of Permutation Tests Questions and Exercises Notes References Randomized Experiments Unique Benefits of Experiments Experimentation without Mani

  14. Implementing Dust Shielding as a Criteria for Star Formation

    Science.gov (United States)

    Byrne, Lindsey; Christensen, Charlotte

    2018-01-01

    Star formation is observed to occur in dense regions of molecular gas. Although the exact nature of the link between star formation and molecular hydrogen is still unclear, it has been suggested that dust shielding of dense gas is the key factor enabling the presence of both. We present a model in which star formation is linked explicitly to local dust shielding, rather than molecular hydrogen abundance, in smoothed particle hydrodynamics galaxy formation simulations. We used simulations of isolated Milky-Way-mass disk galaxies to develop a dust shielding model in which the radiative shielding length was based off of the Jeans length with a T=40 K temperature cap. Using this shielding model, we compare the effects of different star formation recipes, including recipes in which star formation is based on the amount of dust shielding or the local molecular hydrogen abundance. We test our star formation models on two sets of isolated disk galaxies with solar and sub-solar metallicities and on a cosmological dwarf galaxy simulation. We find that the shielding-based model can reproduce the observed transition from atomic to molecular hydrogen at realistic surface densities, exhibits periodic bursts of star formation, and allows for star formation at higher temperatures and lower densities than a model in which star formation is tied directly to H2 abundance.

  15. Formation feedback control of UAV flight

    Science.gov (United States)

    Stegall, Stephen

    This thesis is a study of formation control with autonomous unmanned aerial vehicles using the formation as feedback. There is also an investigation of formation methods presenting insight into different algorithms for formations. A rigid formation is achieved using a proportional-derivative virtual structure with a formation feedback controller. There is an emphasis on stick controlled aerodynamics. The rigid formation is verified by a simulation of a longitudinal model. Formation control ideas are presented for rigid formations.

  16. Large Format Radiographic Imaging

    International Nuclear Information System (INIS)

    Rohrer, J. S.; Stewart, Lacey; Wilke, M. D.; King, N. S.; Baker A, S.; Lewis, Wilfred

    1999-01-01

    Radiographic imaging continues to be a key diagnostic in many areas at Los Alamos National Laboratory (LANL). Radiographic recording systems have taken on many form, from high repetition-rate, gated systems to film recording and storage phosphors. Some systems are designed for synchronization to an accelerator while others may be single shot or may record a frame sequence in a dynamic radiography experiment. While film recording remains a reliable standby in the radiographic community, there is growing interest in investigating electronic recording for many applications. The advantages of real time access to remote data acquisition are highly attractive. Cooled CCD camera systems are capable of providing greater sensitivity with improved signal-to-noise ratio. This paper begins with a review of performance characteristics of the Bechtel Nevada large format imaging system, a gated system capable of viewing scintillators up to 300 mm in diameter. We then examine configuration alternatives in lens coupled and fiber optically coupled electro-optical recording systems. Areas of investigation include tradeoffs between fiber optic and lens coupling, methods of image magnification, and spectral matching from scintillator to CCD camera. Key performance features discussed include field of view, resolution, sensitivity, dynamic range, and system noise characteristics

  17. Continuing galactic formation

    International Nuclear Information System (INIS)

    McCanney, J.M.

    1981-01-01

    A new theory for galactic arm formation shows the arms to be continually eminating from the galactic nucleus due to a continual influx of cosmic dust. In the neighborhood of the nucleus the problem is treated as a fluid flow and a simple solution is given using conservation of momentum. When rotational dynamics are included the spinning arm system is the result. This solution resolves the problem of the missing mass, accounts for warped disk galaxies and gives a probable source for the gravity waves measured by Weber which eminate from our galactic center. Reversal of arm direction is demonstrated and examples of such reversals are cited. An approximate theoretical estimate of the age of our Sun is found to be in good agreement with radio isotope dating. A general result shows why twin star systems are in such great abundance in a galaxy. It gives a model of galactic evolution which begins with only a single massive nucleus with the collapsing gas clouds forming the arms. (orig.)

  18. SPMHD simulations of Structure Formation

    Science.gov (United States)

    Barnes, David J.; On, Alvina Y. L.; Wu, Kinwah; Kawata, Daisuke

    2018-02-01

    The intracluster medium of galaxy clusters is permeated by μ {G} magnetic fields. Observations with current and future facilities have the potential to illuminate the role of these magnetic fields play in the astrophysical processes of galaxy clusters. To obtain a greater understanding of how the initial seed fields evolve to the magnetic fields in the intracluster medium requires magnetohydrodynamic simulations. We critically assess the current Smoothed Particle Magneto-Hydrodynamics (SPMHD) schemes, especially highlighting the impact of a hyperbolic divergence cleaning scheme and artificial resistivity switch on the magnetic field evolution in cosmological simulations of the formation of a galaxy cluster using the N-body/SPMHD code GCMHD++. The impact and performance of the cleaning scheme and two different schemes for the artificial resistivity switch is demonstrated via idealized test cases and cosmological simulations. We demonstrate that the hyperbolic divergence cleaning scheme is effective at suppressing the growth of the numerical divergence error of the magnetic field and should be applied to any SPMHD simulation. Although the artificial resistivity is important in the strong field regime, it can suppress the growth of the magnetic field in the weak field regime, such as galaxy clusters. With sufficient resolution, simulations with divergence cleaning can reproduce observed magnetic fields. We conclude that the cleaning scheme alone is sufficient for galaxy cluster simulations, but our results indicate that the SPMHD scheme must be carefully chosen depending on the regime of the magnetic field.

  19. Test chamber

    NARCIS (Netherlands)

    Leferink, Frank Bernardus Johannes

    1999-01-01

    A test chamber for measuring electromagnetic radiation emitted by an apparatus to be tested or for exposing an apparatus to be tested to an electromagnetic radiation field. The test chamber includes a reverberation chamber made of a conductive tent fabric. To create a statistically uniform field in

  20. Test chamber

    NARCIS (Netherlands)

    Leferink, Frank Bernardus Johannes

    2009-01-01

    A test chamber for measuring electromagnetic radiation emitted by an apparatus to be tested or for exposing an apparatus to be tested to an electromagnetic radiation field. The test chamber includes a reverberation chamber made of a conductive tent fabric. To create a statistically uniform field in

  1. Habit Formation: Deep and Uncertain

    OpenAIRE

    Ali Choudhary; Young-Bae Kim

    2007-01-01

    We extend the Ravn, Schmitt-Grohe and Uribe (Review of Economic Studies, 2006) model of external deep-habits with the idea that some product varieties are more prone to habit formation than others. This s uncertainty in habit formation which affects firm's pricing. Provided that uncertainty is strong, a profound implication is that role of market frictions, such as habit formation, and its consequences for the dynamic variations in the markups can be reversed.

  2. Treatment of an underground formation

    Energy Technology Data Exchange (ETDEWEB)

    Hudson, P.E.; Braden, W.B. Jr.

    1974-03-12

    A method is described for treating underground formations, especially those containing clays or clay-like materials which are sensitive to fresh water. The treatment densensitizes the clays so they will not swell or disperse on contact with fresh water. The procedure consists of contacting the clay-containing formation with solutions which accomplish the electroless deposition of metal on the clay particles. Optionally, the formation can be resin coated prior to electroless plating. (9 claims)

  3. Experimental Study of Formation Damage during Underbalanced-Drilling in Naturally Fractured Formations

    Directory of Open Access Journals (Sweden)

    Siroos Salimi

    2011-10-01

    Full Text Available This paper describes an experimental investigation of formation damage in a fractured carbonate core sample under underbalanced drilling (UBD conditions. A major portion of this study has concentrated on problems which are often associated with UBD and the development of a detailed protocol for proper design and execution of an UBD program. Formation damage effects, which may occur even if the underbalanced pressure condition is maintained 100% of the time during drilling operation, have been studied. One major concern for formation damage during UBD operations is the loss of the under-balanced pressure condition. Hence, it becomes vital to evaluate the sensitivity of the formation to the effect of an overbalanced pulse situation. The paper investigates the effect of short pulse overbalance pressure during underbalanced conditions in a fractured chalk core sample. Special core tests using a specially designed core holder are conducted on the subject reservoir core. Both overbalance and underbalanced tests were conducted with four UBD drilling fluids. Core testing includes measurements of the initial permeability and return permeability under two different pressure conditions (underbalanced and overbalanced. Then the procedure is followed by applying a differential pressure on the core samples to mimic the drawdown effect to determine the return permeability capacity. In both UBD and short pulse OBP four mud formulations are used which are: lab oil, brine (3% KCL, water-based mud (bentonite with XC polymer and fresh water. The return permeability measurements show that a lab oil system performed fairly well during UBD and short OB conditions. The results indicate that a short overbalance pressure provides a significant reduction in permeability of the fractured formations. In most tests, even application of a high drawdown pressure during production cannot restore the initial permeability by more than 40%.

  4. Tensile testing

    CERN Document Server

    2004-01-01

    A complete guide to the uniaxial tensile test, the cornerstone test for determining the mechanical properties of materials: Learn ways to predict material behavior through tensile testing. Learn how to test metals, alloys, composites, ceramics, and plastics to determine strength, ductility and elastic/plastic deformation. A must for laboratory managers, technicians, materials and design engineers, and students involved with uniaxial tensile testing. Tensile Testing , Second Edition begins with an introduction and overview of the test, with clear explanations of how materials properties are determined from test results. Subsequent sections illustrate how knowledge gained through tensile tests, such as tension properties to predict the behavior (including strength, ductility, elastic or plastic deformation, tensile and yield strengths) have resulted in improvements in materals applications. The Second Edition is completely revised and updated. It includes expanded coverage throughout the volume on a variety of ...

  5. Aromatics Oxidation and Soot Formation in Flames

    Energy Technology Data Exchange (ETDEWEB)

    Howard, J. B.; Richter, H.

    2005-03-29

    This project is concerned with the kinetics and mechanisms of aromatics oxidation and the growth process to polycyclic aromatic hydrocarbons (PAH) of increasing size, soot and fullerenes formation in flames. The overall objective of the experimental aromatics oxidation work is to extend the set of available data by measuring concentration profiles for decomposition intermediates such as phenyl, cyclopentadienyl, phenoxy or indenyl radicals which could not be measured with molecular-beam mass spectrometry to permit further refinement and testing of benzene oxidation mechanisms. The focus includes PAH radicals which are thought to play a major role in the soot formation process while their concentrations are in many cases too low to permit measurement with conventional mass spectrometry. The radical species measurements are used in critical testing and improvement of a kinetic model describing benzene oxidation and PAH growth. Thermodynamic property data of selected species are determined computationally, for instance using density functional theory (DFT). Potential energy surfaces are explored in order to identify additional reaction pathways. The ultimate goal is to understand the conversion of high molecular weight compounds to nascent soot particles, to assess the roles of planar and curved PAH and relationships between soot and fullerenes formation. The specific aims are to characterize both the high molecular weight compounds involved in the nucleation of soot particles and the structure of soot including internal nanoscale features indicative of contributions of planar and/or curved PAH to particle inception.

  6. Workplace Testing: Who's Testing Whom?

    Science.gov (United States)

    Greenberg, Eric Rolfe

    1989-01-01

    A survey conducted by the American Management Association on workplace-testing policies included questions about drug testing, polygraphs, and testing for the human immunodeficiency virus. The survey found that testing increased from 21 percent in 1986 to 37 percent in 1987 and 48 percent in the 1988 survey. (JOW)

  7. Kaffir lime leaves extract inhibits biofilm formation by Streptococcus mutans.

    Science.gov (United States)

    Kooltheat, Nateelak; Kamuthachad, Ludthawun; Anthapanya, Methinee; Samakchan, Natthapon; Sranujit, Rungnapa Pankla; Potup, Pachuen; Ferrante, Antonio; Usuwanthim, Kanchana

    2016-04-01

    Although kaffir lime has been reported to exhibit antioxidant and antileukemic activity, little is known about the antimicrobial effect of kaffir lime extract. Because Streptococcus mutans has been known to cause biofilm formation, it has been considered the most important causative pathogen of dental caries. Thus, the effective control of its effects on the oral biofilm is the key to the prevention of dental caries. The aims of the present study were to investigate the effect of kaffir lime leaves extract on biofilm formation and its antibacterial activity on S. mutans. We examined the effect of kaffir lime leaves extract on growth and biofilm formation of S. mutans. For the investigation we used a kaffir lime extract with high phenolic content. The minimum inhibitory concentration of the extract was determined by broth microdilution assay. The inhibitory effect of the test substances on biofilm formation was also investigated by biofilm formation assay and qRT-PCR of biofilm formation-associated genes. Kaffir lime leaves extract inhibits the growth of S. mutans, corresponding to the activity of an antibiotic, ampicillin. Formation of biofilm by S. mutans was also inhibited by the extract. These results were confirmed by the down-regulation of genes associated with the biofilm formation. The findings highlight the ability of kaffir lime leaves extract to inhibit S. mutans activity, which may be beneficial in the prevention of biofilm formation on dental surface, reducing dental plaque and decreasing the chance of dental carries. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Satellite formation flying relative dynamics, formation design, fuel optimal maneuvers and formation maintenance

    CERN Document Server

    Wang, Danwei; Poh, Eng Kee

    2017-01-01

    This book systematically describes the concepts and principles for multi-satellite relative motion, passive and near passive formation designs, trajectory planning and control for fuel optimal formation maneuvers, and formation flying maintenance control design. As such, it provides a sound foundation for researchers and engineers in this field to develop further theories and pursue their implementations. Though satellite formation flying is widely considered to be a major advance in space technology, there are few systematic treatments of the topic in the literature. Addressing that gap, the book offers a valuable resource for academics, researchers, postgraduate students and practitioners in the field of satellite science and engineering.

  9. Test quality

    International Nuclear Information System (INIS)

    Hartley, R.S.; Keller, A.E.

    1992-01-01

    This document discusses inservice testing of safety-related components at nuclear power plants which is performed under the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (the Code). Subsections IWP and IWV of Section XI of the Code state test method and frequency requirements for pumps and valves respectively. Tests vary greatly in quality and frequency. This paper explores the concept of test quality and its relationship with operational readiness and preventive maintenance. This paper also considers the frequencies of component testing. Test quality is related to a test's ability to detect degradation that can cause component failure. The quality of the test depends on several factors, including specific parameters measured, system or component conditions, and instrument accuracy. The quality of some currently required tests for check valves, motor-operated valves, and pumps is also discussed. Suggestions are made to improve test quality by measuring different parameters, testing valves under load, and testing positive displacement pumps at high pressure and centrifugal pumps at high flow rate conditions. These suggestions can help to improve the level of assurance of component operational readiness gained from testing

  10. Test quality

    International Nuclear Information System (INIS)

    Hartley, R.S.; Keller, A.E.

    1992-01-01

    Inservice testing of safety-related components at nuclear power plants is performed under the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (the Code). Subsections IWP and IWV of Section 11 of the Code state test method and frequency requirements for pumps and valves, respectively. Tests vary greatly in quality and frequency. This paper explores the concept of test quality and its relationship with operational readiness and preventive maintenance. This paper also considers the frequencies of component testing. Test quality is related to a test's ability to detect degradation that can cause component failure. The quality of the test depends on several factors, including specific parameters measured, system or component conditions, and instrument accuracy. The quality of some currently required tests for check valves, motor-operated valves, and pumps is also discussed. Suggestions are made to improve test quality by measuring different parameters, testing valves under load, and testing positive displacement pumps at high pressure and centrifugal pumps at high flow rate conditions. These suggestions can help to improve the level of assurance of component operational readiness gained from testing

  11. Uranium logging in earth formations

    International Nuclear Information System (INIS)

    Givens, W.W.

    1979-01-01

    A technique is provided for assaying the formations surrounding a borehole for uranium. A borehole logging tool cyclically irradiates the formations with neutrons and responds to neutron fluxes produced during the period of time that prompt neutrons are being produced by the neutron fission of uranium in the formations. A borehole calibration tool employs a steady-state (continuous output) neutron source, firstly, to produce a response to neutron fluxes in models having known concentrations of uranium and, secondly, to to produce a response to neutron fluxes in the formations surrounding the borehole. The neutron flux responses of the borehole calibration tool in both the model and the formations surrounding the borehole are utilized to correct the neutron flux response of the borehole logging tool for the effects of epithermal/thermal neutron moderation, scattering, and absorption within the borehole itself

  12. ACT Test

    Science.gov (United States)

    ... Content View Sources Ask Us Also Known As ACT Activated Coagulation Time Formal Name Activated Clotting Time ... What is being tested? The activated clotting time (ACT) is a test that is used primarily to ...

  13. Genomic Testing

    Science.gov (United States)

    ... Events and Multimedia Implementation Genetics 101 Family Health History Genomics and Diseases Genetic Counseling Genomic Testing Epidemiology Pathogen Genomics Resources Genomic Testing Recommend on Facebook Tweet Share Compartir Fact Sheet: Identifying Opportunities to ...

  14. Genetic Testing

    Science.gov (United States)

    ... on to their children Screening embryos for disease Testing for genetic diseases in adults before they cause ... provide information about the pros and cons of testing. NIH: National Human Genome Research Institute

  15. Syphilis Test

    Science.gov (United States)

    ... Sex Hormone Binding Globulin (SHBG) Shiga toxin-producing Escherichia coli Sickle Cell Tests Sirolimus Smooth Muscle Antibody (SMA) ... Pp 1612-1614. ARUP Consult. Syphilis Testing Algorithm. PDF available for download at http://search.arupconsult.com/ ...

  16. Nationale test

    DEFF Research Database (Denmark)

    2009-01-01

    Professor Sven Erik Nordenbo og centerleder Niels Egelund, begge DPU, i samtale om nationale test.......Professor Sven Erik Nordenbo og centerleder Niels Egelund, begge DPU, i samtale om nationale test....

  17. Ferritin Test

    Science.gov (United States)

    ... normal" values. By comparing your test results with reference values, you and your healthcare provider can see if ... along with other iron tests , when a routine complete blood count (CBC) shows that a person's hemoglobin and hematocrit ...

  18. Randomization tests

    National Research Council Canada - National Science Library

    Edgington, Eugene S

    1980-01-01

    .... This book provides all the necessary theory and practical guidelines, such as instructions for writing computer programs, to permit experimenters to transform any statistical test into a distribution-free test...

  19. Pap test

    Science.gov (United States)

    Papanicolaou test; Pap smear; Cervical cancer screening - Pap test; Cervical intraepithelial neoplasia - Pap; CIN - Pap; Precancerous changes of the cervix - Pap; Cervical cancer - Pap; Squamous intraepithelial lesion - Pap; LSIL - Pap; HSIL - Pap; ...

  20. Laboratory Tests

    Science.gov (United States)

    ... Medical Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & ... What are lab tests? Laboratory tests are medical devices that are intended for use on samples of blood, urine, or other tissues ...

  1. Globulin Test

    Science.gov (United States)

    ... you have liver or kidney disease . Serum protein electrophoresis. This blood test measures gamma globulins and other ... myeloma. Other names for globulin tests: Serum globulin electrophoresis, total protein What is it used for? Globulin ...

  2. Tensilon test

    Science.gov (United States)

    Myasthenia gravis - tensilon ... tests to help tell the difference between myasthenia gravis and other conditions. ... The test helps: Diagnose myasthenia gravis Tell the difference between ... Monitor treatment with oral anticholinesterase drugs The ...

  3. DHEAS Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  4. Osmolality Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  5. Lipase Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  6. Neuropathy Tests

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  7. Troponins Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  8. Prealbumin Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  9. Progesterone Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  10. Iron Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  11. Serotonin Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  12. Ammonia Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  13. Complement Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  14. Myoglobin Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  15. AMA Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  16. Trypsinogen Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  17. Chloride Test

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  18. Fungal Tests

    Science.gov (United States)

    ... Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea Nitrogen (BUN) BNP and NT-proBNP ... Luteinizing Hormone (LH) Lyme Disease Tests Magnesium Maternal Serum Screening, Second Trimester Measles and Mumps Tests Mercury ...

  19. Estrogen Test

    Science.gov (United States)

    ... and Iron-binding Capacity (TIBC, UIBC) Trichomonas Testing Triglycerides Troponin Tryptase Tumor Markers Uric Acid Urinalysis Urine ... in men and play a role in bone metabolism and growth in both sexes. Estrogen tests measure ...

  20. Nationale Test

    DEFF Research Database (Denmark)

    2009-01-01

    Hvad er egentlig formålet med de nationale test? Bliver eleverne klogere af at blive testet? Og er der en sammenhæng mellem bandekrig og nationale test? Fysisk medie: dpu.dk/tv......Hvad er egentlig formålet med de nationale test? Bliver eleverne klogere af at blive testet? Og er der en sammenhæng mellem bandekrig og nationale test? Fysisk medie: dpu.dk/tv...

  1. Earthquake likelihood model testing

    Science.gov (United States)

    Schorlemmer, D.; Gerstenberger, M.C.; Wiemer, S.; Jackson, D.D.; Rhoades, D.A.

    2007-01-01

    INTRODUCTIONThe Regional Earthquake Likelihood Models (RELM) project aims to produce and evaluate alternate models of earthquake potential (probability per unit volume, magnitude, and time) for California. Based on differing assumptions, these models are produced to test the validity of their assumptions and to explore which models should be incorporated in seismic hazard and risk evaluation. Tests based on physical and geological criteria are useful but we focus on statistical methods using future earthquake catalog data only. We envision two evaluations: a test of consistency with observed data and a comparison of all pairs of models for relative consistency. Both tests are based on the likelihood method, and both are fully prospective (i.e., the models are not adjusted to fit the test data). To be tested, each model must assign a probability to any possible event within a specified region of space, time, and magnitude. For our tests the models must use a common format: earthquake rates in specified “bins” with location, magnitude, time, and focal mechanism limits.Seismology cannot yet deterministically predict individual earthquakes; however, it should seek the best possible models for forecasting earthquake occurrence. This paper describes the statistical rules of an experiment to examine and test earthquake forecasts. The primary purposes of the tests described below are to evaluate physical models for earthquakes, assure that source models used in seismic hazard and risk studies are consistent with earthquake data, and provide quantitative measures by which models can be assigned weights in a consensus model or be judged as suitable for particular regions.In this paper we develop a statistical method for testing earthquake likelihood models. A companion paper (Schorlemmer and Gerstenberger 2007, this issue) discusses the actual implementation of these tests in the framework of the RELM initiative.Statistical testing of hypotheses is a common task and a

  2. Computational Approaches for Probing the Formation of Atmospheric Molecular Clusters

    DEFF Research Database (Denmark)

    Elm, Jonas

    This thesis presents the investigation of atmospheric molecular clusters using computational methods. Previous investigations have focused on solving problems related to atmospheric nucleation, and have not been targeted at the performance of the applied methods. This thesis focuses on assessing...... the performance of computational strategies in order to identify a sturdy methodology, which should be applicable for handling various issues related to atmospheric cluster formation. Density functional theory (DFT) is applied to study individual cluster formation steps. Utilizing large test sets of numerous...

  3. Reduction of Bromate Formation During Ozonation of Drinking Water

    DEFF Research Database (Denmark)

    Antoniou, Maria; Sichel, C.; Andre, K.

    This study focused on the prevention of carcinogenic bromate formation during ozonation of tap water from the DTU university campus. To achieve this, different pre-treatments including pH-adjustment, ammonia addition and chlorine-ammonia addition, were tested. Formation of bromated was drastically...... reduced by each pretreatment while the required ozone dose for 90% atrazine removal increased at different degree for each pre-treatment....

  4. Numerical study on drop formation through a micro nozzle

    International Nuclear Information System (INIS)

    Kim, Sung Il; Son, Gi Hun

    2005-01-01

    The drop ejection process from a micro nozzle is investigated by numerically solving the conservation equations for mass and momentum. The liquid-gas interface is tracked by a level set method which is extended for two-fluid flows with irregular solid boundaries. Based on the numerical results, the liquid jet breaking and droplet formation behavior is found to depend strongly on the pulse type of forcing pressure and the contact angle at the gas-liquid-solid interline. The negative pressure forcing can be used to control the formation of satelite droplets. Also, various nozzle shapes are tested to investigate their effect on droplet formation

  5. Formation of giant planets

    International Nuclear Information System (INIS)

    Perri, F.

    1975-01-01

    When a planetary core composed of condensed matter is accumulated in the primitive solar nebula, the gas of the nebula becomes gravitationally concentrated as an envelope surrounding the planetary core. Models of such gaseous envelopes have been constructed subject to the assumption that the gas everywhere is on the same adiabat as that in the surrounding nebula. The gaseous envelope extends from the surface of the core to the distance at which the gravitational attraction of core plus envelope becomes equal to the gradient of the gravitational potential in the solar nebula; at this point the pressure and temperature of the gas in the envelope are required to attain the background values characteristic of the solar nebula. In general, as the mass of the condensed core increases, increasing amounts of gas became concentrated in the envelope, and these envelopes are stable against hydrodynamic instabilities. However, the core mass then goes through a maximum and starts to decrease. In most of the models tested the envelopes were hydrodynamically unstable beyond the peak in the core mass. An unstable situation was always created if it was insisted that the core mass contain a larger amount of matter than given by these solutions. For an initial adiabat characterized by a temperature of 450 0 K and a pressure of 5 x 10 -6 atmospheres, the maximum core mass at which instability occurs is approximately 115 earth masses. It is concluded that the giant planets obtained their large amounts of hydrogen and helium by a hydrodynamic collapse process in the solar nebula only after the nebula had been subjected to a considerable period of cooling

  6. AGN feedback in galaxy formation

    CERN Document Server

    Antonuccio-Delogu, Vincenzo

    2010-01-01

    During the past decade, convincing evidence has been accumulated concerning the effect of active galactic nuclei (AGN) activity on the internal and external environment of their host galaxies. Featuring contributions from well-respected researchers in the field, and bringing together work by specialists in both galaxy formation and AGN, this volume addresses a number of key questions about AGN feedback in the context of galaxy formation. The topics covered include downsizing and star-formation time scales in massive elliptical galaxies, the connection between the epochs of supermassive black h

  7. Dynamics of rock varnish formation

    Energy Technology Data Exchange (ETDEWEB)

    Raymond, R. Jr.; Reneau, S.L.; Guthrie, G.D. Jr.; Bish, D.L.; Harrington, C.D.

    1991-01-01

    Our studies of rock varnish from the southwestern United States suggest that the Mn-phase in rock varnish has neither the chemistry nor the crystal structure of birnessite. Rather, the Mn-rich phase is non-crystalline and contains Ba, Ca, Fe, Al, and P. Unknowns concerning the formation of this non-crystalline Mn phase must be resolved before researchers are able to define chemical parameters of rock varnish formation based upon conditions of formation of the Mn phase. 6 refs., 9 figs.

  8. Free-format RPG IV

    CERN Document Server

    Martin, Jim

    2013-01-01

    This how-to guide offers a concise and thorough introduction to the increased productivity, better readability, and easier program maintenance that comes with the free-format style of programming in RPG IV. Although free-format information is available in IBM manuals, it is not separated from everything else, thereby requiring hours of tedious research to track down the information needed. This book provides everything one needs to know to write RPG IV in the free-format style, and author Jim Martin not only teaches rules and syntax but also explains how this new style of coding has the pot

  9. Effect of Formative Quizzes on Teacher Candidates’ Learning in General Chemistry

    OpenAIRE

    Yalaki, Yalcin; Bayram, Zeki

    2015-01-01

    Formative assessment or assessment for learning is one of the most emphasized educational innovations around the world. Two of the common strategies that could be used in formative assessment are use of summative tests for formative purposes and comment only marking. We utilized these strategies in the form of formative quizzes in a general chemistry course and measured its effect on students’ learning. The results of our weak-experimental design, which was conducted with 124 pre-service elem...

  10. Habit formation, surplus consumption and return predictability

    DEFF Research Database (Denmark)

    Engsted, Tom; Hyde, Stuart; Vinther Møller, Stig

    2010-01-01

    On an international post World War II dataset, we use an iterated GMM procedure to estimate and test the Campbell and Cochrane (1999, By force of habit: a consumption-based explanation of aggregate stock market behavior. Journal of Political Economy 107, 205–251.) habit formation model with a time...... empirical support in a variety of different dimensions, including reasonable estimates of risk-free rates. Further, for the majority of countries the surplus consumption ratio captures time-variation in expected returns. Together with the price-dividend ratio, the surplus consumption ratio contains...

  11. IMPACTS OF BIOFILM FORMATION ON CELLULOSE FERMENTATION

    Energy Technology Data Exchange (ETDEWEB)

    Leschine, Susan

    2009-10-31

    This project addressed four major areas of investigation: i) characterization of formation of Cellulomonas uda biofilms on cellulose; ii) characterization of Clostridium phytofermentans biofilm development; colonization of cellulose and its regulation; iii) characterization of Thermobifida fusca biofilm development; colonization of cellulose and its regulation; and iii) description of the architecture of mature C. uda, C. phytofermentans, and T. fusca biofilms. This research is aimed at advancing understanding of biofilm formation and other complex processes involved in the degradation of the abundant cellulosic biomass, and the biology of the microbes involved. Information obtained from these studies is invaluable in the development of practical applications, such as the single-step bioconversion of cellulose-containing residues to fuels and other bioproducts. Our results have clearly shown that cellulose-decomposing microbes rapidly colonize cellulose and form complex structures typical of biofilms. Furthermore, our observations suggest that, as cells multiply on nutritive surfaces during biofilms formation, dramatic cell morphological changes occur. We speculated that morphological changes, which involve a transition from rod-shaped cells to more rounded forms, might be more apparent in a filamentous microbe. In order to test this hypothesis, we included in our research a study of biofilm formation by T. fusca, a thermophilic cellulolytic actinomycete commonly found in compost. The cellulase system of T. fusca has been extensively detailed through the work of David Wilson and colleagues at Cornell, and also, genome sequence of a T. fusca strain has been determine by the DOE Joint Genome Institute. Thus, T. fusca is an excellent subject for studies of biofilm development and its potential impacts on cellulose degradation. We also completed a study of the chitinase system of C. uda. This work provided essential background information for understanding how C. uda

  12. Software Testing

    Science.gov (United States)

    1977-11-15

    CATALOG NUMBER 4. TITLE (and Subtitle) . TYPE OF REPO RI.O COVERED_ US ARMY TEST AND EVALUATION COMMND TEST OF R&TN CEDURE Final------- SOFWAR TEST...verification, the TECON field activity A should offer to provide this service using the CRWG and the TIWG as vehicles for coordination. 2.2 Algorithm... services and controls the applications programs. Among its many functions are dispatching and scheduling of tasks; allocat- ing and freeing of memory

  13. Testing Interfaces

    DEFF Research Database (Denmark)

    Holbøll, Joachim T.; Henriksen, Mogens; Nilson, Jesper K.

    1999-01-01

    , destroy the insulation and eventually cause breakdown. It is difficult to make a model of the real-life components that can be used to examine all of these phenomena. Some decisions have to be made on how to approach this problem, how to design a test cell and how the tests should be carried out....... In this paper, four suggestions on test cells are considered....

  14. Testing Interfaces

    DEFF Research Database (Denmark)

    Holbøll, Joachim T.; Henriksen, Mogens; Nilson, Jesper K.

    1999-01-01

    the insulation and eventually cause breakdown.It is difficult to make a model of the real-life components that can be used to examine all of these phenomena. Some decisions have to be made on how to approach this problem, how to design a test cell and how the tests should be carried out. In this paper, four...... suggestions on test cells are considered....

  15. Modularity in New Market Formation

    DEFF Research Database (Denmark)

    Sanchez, Ron; Hang, Chang Chieh

    2017-01-01

    the formation of an industrial base of assemblers and component suppliers, assisting new firms in building customer relationships, enabling more geographically diffused economic development within countries, and facilitating development of export markets. We also suggest directions for further research......In this paper we appraise the ways in which use of closed-system proprietary product architectures versus open-system modular product architectures is likely to influence the dynamics and trajectory of new product market formation. We compare the evolutions of new markets in China for gas...... as the basis for new kinds of products may result in very different patterns and speeds of new market formation. We then suggest some key implications of the different dynamics of market formation associated with open-system modular architectures for both the competence-based strategic management (CBSM...

  16. Robust Decentralized Formation Flight Control

    Directory of Open Access Journals (Sweden)

    Zhao Weihua

    2011-01-01

    Full Text Available Motivated by the idea of multiplexed model predictive control (MMPC, this paper introduces a new framework for unmanned aerial vehicles (UAVs formation flight and coordination. Formulated using MMPC approach, the whole centralized formation flight system is considered as a linear periodic system with control inputs of each UAV subsystem as its periodic inputs. Divided into decentralized subsystems, the whole formation flight system is guaranteed stable if proper terminal cost and terminal constraints are added to each decentralized MPC formulation of the UAV subsystem. The decentralized robust MPC formulation for each UAV subsystem with bounded input disturbances and model uncertainties is also presented. Furthermore, an obstacle avoidance control scheme for any shape and size of obstacles, including the nonapriorily known ones, is integrated under the unified MPC framework. The results from simulations demonstrate that the proposed framework can successfully achieve robust collision-free formation flights.

  17. The formate bio-economy.

    Science.gov (United States)

    Yishai, Oren; Lindner, Steffen N; Gonzalez de la Cruz, Jorge; Tenenboim, Hezi; Bar-Even, Arren

    2016-12-01

    In this review we discuss the concept of the formate bio-economy: formate can be produced efficiently from various available resources and can be consumed by microbes as the sole carbon source for the production of value-added chemicals, directly addressing major challenges in energy storage and chemical production. We show that the formate assimilation pathways utilized by natural formatotrophs are either inefficient or are constrained to organisms that are difficult to cultivate and engineer. Instead, adapting model industrial organisms to formatotrophic growth using synthetic, specially tailored formate-assimilation routes could prove an advantageous strategy. Several studies have started to tackle this challenge, but a fully active synthetic pathway has yet to be established, leaving room for future undertakings. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Hydroxyl radical formation by dithranol.

    Science.gov (United States)

    Müller, K; Kappus, H

    1988-11-15

    Ethene formation from 2-keto-thiomethyl-butyric acid (KMBA) was used to measure hydroxyl radical generation from the antipsoriatic drug dithranol in phosphate buffer pH 7.8. Because the singlet oxygen (1O2) sensitizer, rose bengale, showed enlarged production of ethene when irradiated in the presence of KMBA, experiments were performed in the dark in order to avoid 1O2 production by dithranol. KMBA was converted to ethene by dithranol under aerobic conditions, whereas ethene formation was negligible in the absence of oxygen. Addition of catalytic amounts of FeCl3 resulted in increased ethene formation, indicating the catalysis of a superoxide-driven Fenton-reaction. O2- - and .OH-scavengers such as rutin, catechin, dimethyl sulfoxide, mannitol, ethanol, sodium salicylate and propyl gallate as well as catalase and superoxide dismutase inhibited ethene formation.

  19. Problem of professional personality formation

    Directory of Open Access Journals (Sweden)

    Pryazhnikova E.Yu.

    2012-09-01

    Full Text Available The article presents the current approaches to the problem of professional personality formation. It ana-lyzes the impact of professional identity of students on the choice of the specialist field they make. The article highlights certain aspects of the educational environment which promote to formation of compe-tences in students, relating to their choice of professional occupations. The article presents the analysis of students’ internal and external strivings after graduation from the university and their fulfillment.

  20. Well stability in shale formations

    OpenAIRE

    Tariq, Abdullah

    2014-01-01

    Master's thesis in Petroleum engineering Well instability in shale formations has been a very major problem due to physiochemical interactions between drilling fluid and formation. In this thesis, chemical, thermal and diffusion effects on the well collapse strength are evaluated in order to investigate the dominating driving forces. A case study on the designed Heidrun well program was also performed in order to study the dynamics of the collapse pressure during drilling phase due to vari...

  1. Chain formation of metal atoms

    DEFF Research Database (Denmark)

    Bahn, Sune Rastad; Jacobsen, Karsten Wedel

    2001-01-01

    The possibility of formation of single-atomic chains by manipulation of nanocontacts is studied for a selection of metals (Ni, Pd, Pt, Cu, Ag, Au). Molecular dynamics simulations show that the tendency for chain formation is strongest for Au and Pt. Density functional theory calculations indicate...... that the metals which form chains exhibit pronounced many-atom interactions with strong bonding in low coordinated systems....

  2. Collaborative Group Testing Benefits High- and Low-Performing Students

    Science.gov (United States)

    Giuliodori, Mauricio J.; Lujan, Heidi L.; DiCarlo, Stephen E.

    2008-01-01

    We used collaborative group testing in a veterinary physiology course (65 students) to test the hypothesis that all students (e.g., high-performing and low-performing students of each group) benefit from collaborative group testing. In this format, students answered questions in the traditional format as individuals. Immediately after completing…

  3. Formation Flying for Satellites and Unmanned Aerial Vehicles

    Science.gov (United States)

    Merrill, Garrick

    2015-01-01

    The shrinking size of satellites and unmanned aerial vehicles (UAVs) is enabling lower cost missions. As sensors and electronics continue to downsize, the next step is multiple vehicles providing different perspectives or variations for more precise measurements. While flying a single satellite or UAV autonomously is a challenge, flying multiple vehicles in a precise formation is even more challenging. The goal of this project is to develop a scalable mesh network between vehicles (satellites or UAVs) to share real-time position data and maintain formations autonomously. Newly available low-cost, commercial off-the-shelf credit card size computers will be used as the basis for this network. Mesh networking techniques will be used to provide redundant links and a flexible network. The Small Projects Rapid Integration and Test Environment Lab will be used to simulate formation flying of satellites. UAVs built by the Aero-M team will be used to demonstrate the formation flying in the West Test Area. The ability to test in flight on NASA-owned UAVs allows this technology to achieve a high Technology Readiness Level (TRL) (TRL-4 for satellites and TRL-7 for UAVs). The low cost of small UAVs and the availability of a large test range (West Test Area) dramatically reduces the expense of testing. The end goal is for this technology to be ready to use on any multiple satellite or UAV mission.

  4. Iron and Acinetobacter baumannii Biofilm Formation

    Directory of Open Access Journals (Sweden)

    Valentina Gentile

    2014-08-01

    Full Text Available Acinetobacter baumannii is an emerging nosocomial pathogen, responsible for infection outbreaks worldwide. The pathogenicity of this bacterium is mainly due to its multidrug-resistance and ability to form biofilm on abiotic surfaces, which facilitate long-term persistence in the hospital setting. Given the crucial role of iron in A. baumannii nutrition and pathogenicity, iron metabolism has been considered as a possible target for chelation-based antibacterial chemotherapy. In this study, we investigated the effect of iron restriction on A. baumannii growth and biofilm formation using different iron chelators and culture conditions. We report substantial inter-strain variability and growth medium-dependence for biofilm formation by A. baumannii isolates from veterinary and clinical sources. Neither planktonic nor biofilm growth of A. baumannii was affected by exogenous chelators. Biofilm formation was either stimulated by iron or not responsive to iron in the majority of isolates tested, indicating that iron starvation is not sensed as an overall biofilm-inducing stimulus by A. baumannii. The impressive iron withholding capacity of this bacterium should be taken into account for future development of chelation-based antimicrobial and anti-biofilm therapies.

  5. Two-dimensional polar format algorithm for high-quality radar image formation

    Science.gov (United States)

    Unzueta, Maribel; Flores, Benjamin C.; Vargas, Ricardo A.

    1996-11-01

    An effective two-dimensional polar format algorithm based on the circular sampling theorem is implemented and tested. The algorithm interpolates samples from a polar to a rectangular raster for the purpose of focusing ISAR imager. The imagery are generated from samples collected in the frequency space utilizing a uniform polar set of coordinates. An example of an extended target is offered to show the versatility of the algorithm. In addition, a point target model is used to test its effectiveness. The distortion introduced by interpolation is calculated and compared to errors introduced by two standard interpolation techniques. Experimental data provided by the Pacific Missile Test Center was used to test the proposed algorithm.

  6. Nationale test

    DEFF Research Database (Denmark)

    Bundsgaard, Jeppe; Puck, Morten Rasmus

    Nationale test skubber undervisning i en forkert retning. Det er lærerne og skolelederne enige om. Men særligt skolelederne ser også muligheder for at bruge testen til at få viden om elevernes faglige kompetencer og om undervisningen. Det kommer til udtryk i rapporten Nationale test: Danske lærere...

  7. Oedometer Tests

    DEFF Research Database (Denmark)

    Thorsen, Grete

    1996-01-01

    The paper describes the results of oedometer tests carried out with samples from Eemian fresh-water deposits and the methods used to determine the preconsolidation pressure from the test results. The influence of creep in the material on the apparent preconsolidation pressure is estimated from a ...

  8. Bartlett test

    NARCIS (Netherlands)

    Hallin, M.; Piegorsch, W.; El Shaarawi, A.

    2012-01-01

    The standard test for homogeneity of covariance matrices, known as the Bartlett test, is notoriously sensitive to violations of Gaussian assumptions. Its asymptotic behavior under non-Gaussian densities and its robustification (validity-robustness and efficiency-robustness) have been the subject of

  9. Thyroid Tests

    Science.gov (United States)

    ... Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition Blood Diseases Diagnostic Tests La información ... Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition Blood Diseases Diagnostic Tests La información ...

  10. Automating Test Activities: Test Cases Creation, Test Execution, and Test Reporting with Multiple Test Automation Tools

    OpenAIRE

    Loke Mun Sei

    2015-01-01

    Software testing has become a mandatory process in assuring the software product quality. Hence, test management is needed in order to manage the test activities conducted in the software test life cycle. This paper discusses on the challenges faced in the software test life cycle, and how the test processes and test activities, mainly on test cases creation, test execution, and test reporting is being managed and automated using several test automation tools, i.e. Jira, ...

  11. Study of radionuclide migration in clay formations

    International Nuclear Information System (INIS)

    Antonioli, F.; Bocola, W.

    1985-01-01

    This paper reports the studies on the migration of Cs, Sr and I in clay formations, which are presently considered for the geological disposal of radioactive wastes. The distribution and diffusion coefficients were evaluated by means of experimental techniques and computer procedures, which are presented in this report. The natural clays tested in the laboratory experiments were sampled from the most representative italian basins and from the zone of Mol (Belgium). In addition tests were performed on monomineral clays artificially remade in edometer. The experimental results are in accordance with data found in the literature and show the existence of a good correlation between the observed migration properties and the granulometric and mineralogic characteristics of the natural clays

  12. An Adaptable Seismic Data Format

    Science.gov (United States)

    Krischer, Lion; Smith, James; Lei, Wenjie; Lefebvre, Matthieu; Ruan, Youyi; de Andrade, Elliott Sales; Podhorszki, Norbert; Bozdağ, Ebru; Tromp, Jeroen

    2016-11-01

    We present ASDF, the Adaptable Seismic Data Format, a modern and practical data format for all branches of seismology and beyond. The growing volume of freely available data coupled with ever expanding computational power opens avenues to tackle larger and more complex problems. Current bottlenecks include inefficient resource usage and insufficient data organization. Properly scaling a problem requires the resolution of both these challenges, and existing data formats are no longer up to the task. ASDF stores any number of synthetic, processed or unaltered waveforms in a single file. A key improvement compared to existing formats is the inclusion of comprehensive meta information, such as event or station information, in the same file. Additionally, it is also usable for any non-waveform data, for example, cross-correlations, adjoint sources or receiver functions. Last but not least, full provenance information can be stored alongside each item of data, thereby enhancing reproducibility and accountability. Any data set in our proposed format is self-describing and can be readily exchanged with others, facilitating collaboration. The utilization of the HDF5 container format grants efficient and parallel I/O operations, integrated compression algorithms and check sums to guard against data corruption. To not reinvent the wheel and to build upon past developments, we use existing standards like QuakeML, StationXML, W3C PROV and HDF5 wherever feasible. Usability and tool support are crucial for any new format to gain acceptance. We developed mature C/Fortran and Python based APIs coupling ASDF to the widely used SPECFEM3D_GLOBE and ObsPy toolkits.

  13. Thermal Testing Measurements Report

    Energy Technology Data Exchange (ETDEWEB)

    R. Wagner

    2002-09-26

    The purpose of the Thermal Testing Measurements Report (Scientific Analysis Report) is to document, in one report, the comprehensive set of measurements taken within the Yucca Mountain Project Thermal Testing Program since its inception in 1996. Currently, the testing performed and measurements collected are either scattered in many level 3 and level 4 milestone reports or, in the case of the ongoing Drift Scale Test, mostly documented in eight informal progress reports. Documentation in existing reports is uneven in level of detail and quality. Furthermore, while all the data collected within the Yucca Mountain Site Characterization Project (YMP) Thermal Testing Program have been submitted periodically to the Technical Data Management System (TDMS), the data structure--several incremental submittals, and documentation formats--are such that the data are often not user-friendly except to those who acquired and processed the data. The documentation in this report is intended to make data collected within the YMP Thermal Testing Program readily usable to end users, such as those representing the Performance Assessment Project, Repository Design Project, and Engineered Systems Sub-Project. Since either detailed level 3 and level 4 reports exist or the measurements are straightforward, only brief discussions are provided for each data set. These brief discussions for different data sets are intended to impart a clear sense of applicability of data, so that they will be used properly within the context of measurement uncertainty. This approach also keeps this report to a manageable size, an important consideration because the report encompasses nearly all measurements for three long-term thermal tests. As appropriate, thermal testing data currently residing in the TDMS have been reorganized and reformatted from cumbersome, user-unfriendly Input-Data Tracking Numbers (DTNs) into a new set of Output-DTNs. These Output-DTNs provide a readily usable data structure

  14. Kinetics of bromochloramine formation and decomposition.

    Science.gov (United States)

    Luh, Jeanne; Mariñas, Benito J

    2014-01-01

    Batch experiments were performed to study the kinetics of bromochloramine formation and decomposition from the reaction of monochloramine and bromide ion. The effects of pH, initial monochloramine and bromide ion concentrations, phosphate buffer concentration, and excess ammonia were evaluated. Results showed that the monochloramine decay rate increased with decreasing pH and increasing bromide ion concentration, and the concentration of bromochloramine increased to a maximum before decreasing gradually. The maximum bromochloramine concentration reached was found to decrease with increasing phosphate and ammonia concentrations. Previous models in the literature were not able to capture the decay of bromochloramine, and therefore we proposed an extended model consisting of reactions for monochloramine autodecomposition, the decay of bromamines in the presence of bromide, bromochloramine formation, and bromochloramine decomposition. Reaction rate constants were obtained through least-squares fitting to 11 data sets representing the effect of pH, bromide, monochloramine, phosphate, and excess ammonia. The reaction rate constants were then used to predict monochloramine and bromochloramine concentration profiles for all experimental conditions tested. In general, the modeled lines were found to provide good agreement with the experimental data under most conditions tested, with deviations occurring at low pH and high bromide concentrations.

  15. Testing the age calibration of the Newark-Hartford APTS by magnetostratigraphic correlation of U-Pb zircon-dated tuffaceous beds in the Late Traissic Chinle Formation in core PFNP-1A from the Petrified Forest National Park (Arizona, USA)

    Science.gov (United States)

    Kent, D. V.; Olsen, P. E.; Mundil, R.; Lepre, C. J.

    2017-12-01

    The Newark-Hartford APTS extends over 27 Myr according to cycle stratigraphy of the Norian and Rhaetian of the Late Triassic and Hettangian and Sinemurian of the Early Jurassic and an additional 6 Myr by extrapolation into the Carnian; the entire sequence is anchored by U-Pb zircon dating of CAMP activity that provides a calibration date of 201.6 Ma for Chron E23r just below the end-Triassic extinction and the earliest CAMP basalts in the Newark basin (Blackburn+2013 Science; Kent+2017 ESR). The developing APTS has been successfully used for global correlations in marine and non-marine facies but there have been ongoing suggestions that millions of years of Rhaetian time are missing in a cryptic unconformity that supposedly occurs just above E23r in the Newark Supergroup basins. Testing the continuity of the APTS by magnetostratigraphic correlation of U-Pb zircon-dated tuffaceous beds in the Chinle Formation was a prime scientific objective for core PFNP-1A. Paleomagnetic results were obtained using stepwise thermal demagnetization to 680°C from >150 samples of finer-grained red lithologies from the upper 250 m of the cored section of the Chinle (upper Sonsela, Petrified Forest including the Black Forest Bed, and lower Owl Rock Members). Characteristic directions isolated in 2/3 of the samples showed antipodal directions that were shallow with respect to reference directions (flattening factor 0.5), consistent with early acquisition of remanence. Seven polarity magnetozones produce a distinctive pattern correlated to Chrons E17r to E14r of the APTS. The Black Forest Bed at 209.93±0.26 Ma (Ramezani+2011 GSAB), confirmed by our new U-Pb dates from core PFNP-1A, occurs in a reverse polarity magnetozone correlated to E16r (209.95-210.25 Ma), which puts the U-Pb zircon date(s) in excellent agreement with the inferred APTS age. Rather than a 'missing Rhaetian', the apparent regional differences in appearances and disappearances of palynoflora, conchostracans, and other

  16. The Physics of Planetesimal Formation

    Science.gov (United States)

    Simon, Jacob; Armitage, Philip; Youdin, Andrew; Li, Rixin

    2015-12-01

    Planetesimals are the precursors to planets, and understanding their formation is an essential step towards developing a complete theory of planet formation. For small solid particles (e.g., dust grains) to coagulate into planetesimals, however, requires that these particles grow beyond centimeter sizes; with traditional coagulation physics, this is very difficult. The streaming instability, which is a clumping process akin to the pile-up of cars in a traffic jam, generates sufficiently high solid densities that the mutual gravity between the clumped particles eventually causes their collapse towards planetesimal mass and size scales. Exploring this transition from dust grains to planetesimals is still in its infancy but is extremely important if we want to understand the basics of planet formation. Here, I present a series of high resolution, first principles numerical simulations of potoplanetary disk gas and dust to study the clumping of particles via the streaming instability and the subsequent collapse towards planetesimals. These simulations have been employed to characterize the planetesimal population as a function of radius in protoplanetary disks. The results of these simulations will be crucial for planet formation models to correctly explain the formation and configuration of solar systems.

  17. Scales of Star Formation: Does Local Environment Matter?

    Science.gov (United States)

    Bittle, Lauren

    2018-01-01

    I will present my work on measuring molecular gas properties in local universe galaxies to assess the impact of local environment on the gas and thus star formation. I will also discuss the gas properties on spatial scales that span an order of magnitude to best understand the layers of star formation processes. Local environments within these galaxies include external mechanisms from starburst supernova shells, spiral arm structure, and superstar cluster radiation. Observations of CO giant molecular clouds (GMC) of ~150pc resolution in IC 10, the Local Group dwarf starburst, probe the large-scale diffuse gas, some of which are near supernova bubble ridges. We mapped CO clouds across the spiral NGC 7793 at intermediate scales of ~20pc resolution with ALMA. With the clouds, we can test theories of cloud formation and destruction in relation to the spiral arm pattern and cluster population from the HST LEGUS analysis. Addressing the smallest scales, I will show results of 30 Doradus ALMA observations of sub-parsec dense molecular gas clumps only 15pc away from a superstar cluster R136. Though star formation occurs directly from the collapse of densest molecular gas, we test theories of scale-free star formation, which suggests a constant slope of the mass function from ~150pc GMCs to sub-parsec clumps. Probing environments including starburst supernova shells, spiral arm structure, and superstar cluster radiation shed light on how these local external mechanisms affect the molecular gas at various scales of star formation.

  18. PTT Test

    Science.gov (United States)

    ... are injured, bleeding occurs and a process called hemostasis begins. Small cell fragments called platelets adhere to ... be used to evaluate certain components of the hemostasis system. The PTT and PT tests each evaluate ...

  19. Insulin Test

    Science.gov (United States)

    ... Syndrome Staph Infections and MRSA Stroke Testicular Cancer Thalassemia Thyroid Cancer Thyroid ... Get Tested? To help evaluate insulin production by the beta cells in the pancreas; to help diagnose the ...

  20. VDRL test

    Science.gov (United States)

    ... syphilis . The bacteria that cause syphilis is called Treponema pallidum. Your health care provider may order this test ... 59. Radolf JD, Tramont EC, Salazar JC. Syphilis ( Treponema pallidum ). In: Bennett JE, Dolin R, Blaser MJ, eds. ...