WorldWideScience

Sample records for wireless technology support

  1. Supporting clinical practice at the bedside using wireless technology.

    Science.gov (United States)

    Bullard, Michael J; Meurer, David P; Colman, Ian; Holroyd, Brian R; Rowe, Brian H

    2004-11-01

    Despite studies that show improvements in both standards of care and outcomes with the judicious application of clinical practice guidelines (CPGs), their clinical utilization remains low. This randomized controlled trial examined the use of a wirelessly networked mobile computer (MC) by physicians at the bedside with access to an emergency department information system, decision support tools (DSTs), and other software options. Each of ten volunteer emergency physicians was randomized using a matched-pair design to work five shifts in standard fashion (desktop computer [DC] access) and five shifts with a wirelessly networked MC. Work pattern issues and electronic CPG/DST use were compared using end-of-shift satisfaction questionnaires and review of a CPG/DST database. Repeated-measures analysis of variance was used to examine between-shift differences. A total of 100 eight-hour shifts were evaluated; 99% compliance with postshift questionnaires was achieved. Using a seven-point Likert scale (MC values first), MCs were rated as being as fast (5.04 vs. 4.54; p=0.13) and convenient (5.08 vs. 4.14; p=0.07) as DCs. Overall, physicians rated MCs to be less efficient (3.18 vs. 4.30; p=0.02) but encouraged more frequent use of DSTs (4.10 vs. 3.47; p=0.03) without impacting doctor-patient communication (2.78 vs. 2.96; p=0.51). During the study period, physician use of an intranet Web application (eCPG) was more frequent during shifts assigned to the MC when compared with the DC (eCPG uses/shift, 3.6 vs. 2.0; p=0.033). The MC technology permitted physicians to access information at the bedside and increased the use of CPG/DST tools. According to physicians, patients appeared to accept their use of information technology to assist in decision making. Development of improved computer technology may address the major limitation of MC portability.

  2. Microwave photonics technologies supporting high capacity and flexible wireless communications systems

    DEFF Research Database (Denmark)

    Lu, Xiaofeng; Tatarczak, Anna; Rommel, Simon

    2015-01-01

    Emerging 5G wireless systems require technologies for increased capacity, guarantee robustness, low latency and flexibility. We review a number of approaches to provide the above based on microwave photonics and hybrid optical fiber-wireless communication techniques.......Emerging 5G wireless systems require technologies for increased capacity, guarantee robustness, low latency and flexibility. We review a number of approaches to provide the above based on microwave photonics and hybrid optical fiber-wireless communication techniques....

  3. Modern wireless telecommunication technologies and their electromagnetic compatibility with life-supporting equipment.

    Science.gov (United States)

    Wallin, Mats K E B; Marve, Therese; Hakansson, Peter K

    2005-11-01

    Hospitals rely on pagers and ordinary telephones to reach staff members in emergency situations. New telecommunication technologies such as General Packet Radio Service (GPRS), the third generation mobile phone system Universal Mobile Telecommunications System (UMTS), and Wireless Local Area Network (WLAN) might be able to replace hospital pagers if they are electromagnetically compatible with medical devices. In this study, we sought to determine if GPRS, UMTS (Wideband Code Division Multiple Access-Frequency Division Duplex [WCDMA FDD]), and WLAN (IEEE 802.11b) transmitted signals interfere with life-supporting equipment in the intensive care and operating room environment. According to United States standard, ANSI C63.18-1997, laboratory tests were performed on 76 medical devices. In addition, clinical tests during 11 operations and 100 h of intensive care were performed. UMTS and WLAN signals caused little interference. Devices using these technologies can be used safely in critical care areas and during operations, but direct contact between medical devices and wireless communication devices ought to be avoided. In the case of GPRS, at a distance of 50 cm, it caused an older infusion pump to alarm and stop infusing; the pump had to be reset. Also, 10 cases of interference with device displays occurred. GPRS can be used safely at a distance of 1 m. Terminals/cellular phones using these technologies should be allowed without restriction in public areas because the risk of interference is minimal.

  4. Optical and wireless technologies

    CERN Document Server

    Tiwari, Manish; Singh, Ghanshyam; Minzioni, Paolo

    2018-01-01

    This book presents selected papers from 1st International Conference on Optical and Wireless Technologies, providing insights into the analytical, experimental, and developmental aspects of systems, techniques, and devices in these spheres. It explores the combined use of various optical and wireless technologies in next-generation networking applications, and discusses the latest developments in applications such as photonics, high-speed communication systems and networks, visible light communication, nanophotonics, and wireless and multiple-input-multiple-output (MIMO) systems. The book will serve as a valuable reference resource for academics and researchers across the globe.

  5. Wireless Sensor Portal Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Mobitrum Corporation has demonstrated the feasibility in the Phase I of " A Wireless Sensor Portal Technology" and proposes a Phase II effort to develop a wireless...

  6. Wireless Technology Development: History, Now, and Then

    OpenAIRE

    Lusiana Citra Dewi

    2011-01-01

    Wireless technology is one of many technologies that can enable people to communicate with each other by air medium, or rather you can say by radio frequency. This paper discusses about history of wireless technology, different kinds of wireless connection, wireless technology standards, and a few comparisons of different kinds of world’s wireless technology standards. Besides discussing about history about wireless technology and wireless technology that we can use nowadays, this paper also ...

  7. Wireless Ways: Business and Personal Applications of Wireless Technology.

    Science.gov (United States)

    Chung, Joe

    2001-01-01

    Describes the Art Technology Group (ATG), an electronic business and customer management company, and the work they have done with wireless technology. Highlights include designing virtual offices and supporting the resulting virtual community; the mobility it allows; problems with bandwidth; and display issues. (LRW)

  8. Wireless Sensor Technologies and Applications

    Directory of Open Access Journals (Sweden)

    Feng Xia

    2009-11-01

    Full Text Available Recent years have witnessed tremendous advances in the design and applications of wirelessly networked and embedded sensors. Wireless sensor nodes are typically low-cost, low-power, small devices equipped with limited sensing, data processing and wireless communication capabilities, as well as power supplies. They leverage the concept of wireless sensor networks (WSNs, in which a large (possibly huge number of collaborative sensor nodes could be deployed. As an outcome of the convergence of micro-electro-mechanical systems (MEMS technology, wireless communications, and digital electronics, WSNs represent a significant improvement over traditional sensors. In fact, the rapid evolution of WSN technology has accelerated the development and deployment of various novel types of wireless sensors, e.g., multimedia sensors. Fulfilling Moore’s law, wireless sensors are becoming smaller and cheaper, and at the same time more powerful and ubiquitous. [...

  9. Wireless Technology Development: History, Now, and Then

    Directory of Open Access Journals (Sweden)

    Lusiana Citra Dewi

    2011-12-01

    Full Text Available Wireless technology is one of many technologies that can enable people to communicate with each other by air medium, or rather you can say by radio frequency. This paper discusses about history of wireless technology, different kinds of wireless connection, wireless technology standards, and a few comparisons of different kinds of world’s wireless technology standards. Besides discussing about history about wireless technology and wireless technology that we can use nowadays, this paper also reviews about prediction of wireless technology development in the future for better human life. The purpose of this study is to give a glimpse of view on how the wireless technology develops, the world standard for wireless technologies and work system, the security and characteristic for each wireless technology including advantages and drawbacks, and future wireless technology development. 

  10. Application and promotion of wireless charging technology

    OpenAIRE

    Yan, Kaijun

    2014-01-01

    The aim of this thesis is to study wireless charging technology and analyze the application and promotion of each technology. This technology is based on Faraday’s electromagnetic in 1830s. It is not a new technology but it is developing high speed nowadays. This thesis introduces four mainstream types of wireless charging technology and three main-stream standards, and analyzes their features and development status. Wireless charging technology has been applied to some products, suc...

  11. [Wireless human body communication technology].

    Science.gov (United States)

    Sun, Lei; Zhang, Xiaojuan

    2014-12-01

    The Wireless Body Area Network (WBAN) is a key part of the wearable monitoring technologies, which has many communication technologies to choose from, like Bluetooth, ZigBee, Ultra Wideband, and Wireless Human Body Communication (WHBC). As for the WHBC developed in recent years, it is worthy to be further studied. The WHBC has a strong momentum of growth and a natural advantage in the formation of WBAN. In this paper, we first briefly describe the technical background of WHBC, then introduce theoretical model of human-channel communication and digital transmission machine based on human channel. And finally we analyze various of the interference of the WHBC and show the AFH (Adaptive Frequency Hopping) technology which can effectively deal with the interference.

  12. Optical wireless communications an emerging technology

    CERN Document Server

    Capsoni, Carlo; Ghassemlooy, Zabih; Boucouvalas, Anthony; Udvary, Eszter

    2016-01-01

    This book focuses on optical wireless communications (OWC), an emerging technology with huge potential for the provision of pervasive and reliable next-generation communications networks. It shows how the development of novel and efficient wireless technologies can contribute to a range of transmission links essential for the heterogeneous networks of the future to support various communications services and traffic patterns with ever-increasing demands for higher data-transfer rates. The book starts with a chapter reviewing the OWC field, which explains different sub-technologies (visible-light, ultraviolet (UV) and infrared (IR) communications) and introduces the spectrum of application areas (indoor, vehicular, terrestrial, underwater, intersatellite, deep space, etc.). This provides readers with the necessary background information to understand the specialist material in the main body of the book, which is in four parts. The first of these deals with propagation modelling and channel characterization of ...

  13. Wireless network technologies toward 5G

    National Research Council Canada - National Science Library

    Dai Kimura; Hiroyuki Seki; Tokuro Kubo; Tomohiko Taniguchi

    2015-01-01

    .... The 5G wireless network is expected to become a "Heterogeneous Network" where new wireless access technologies incompatible with 4G and the wireless access technologies for unlicensed band are incorporated with the enhanced technology of 4G (e.g. IMT-advanced). This paper introduces the vision and technology trends of 5G, shows key directions of the research and development of 5G in the future, and introduces some of our studies on 5G.

  14. 5G wireless technologies

    CERN Document Server

    Alexiou, Angeliki

    2017-01-01

    Mobile data traffic is expected to exceed traffic from wired devices in the next couple of years. This book presents a roadmap of 5G, from advanced radio technologies to innovative resource management approaches and novel network architectures and system concepts.

  15. Science and Technology Text Mining: Wireless LANS

    Science.gov (United States)

    2005-01-01

    Page 1 SCIENCE AND TECHNOLOGY TEXT MINING : WIRELESS LANS By Dr. Ronald N. Kostoff Office of Naval Research 874 North Randolph...Minnesota) KEYWORDS: Wireless LANs; Database Tomography; text mining ; clustering; computational linguistics; bibliometrics; scientometrics...Technology Text Mining : Wireless LANS 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER

  16. Enabling technologies for wireless e-business

    CERN Document Server

    Kou, Weidong

    2006-01-01

    Provides a coverage of the technologies needed to make wireless e-business effective. This book offers an introduction for both self-study and taught e-business classes or commercial training in e-business and wireless technologies. It explains both industry standards and relevant academic research.

  17. Tradeoff Analysis for Combat Service Support Wireless Communications Alternatives

    Energy Technology Data Exchange (ETDEWEB)

    Burnette, John R.; Thibodeau, Christopher C.; Greitzer, Frank L.

    2002-02-28

    As the Army moves toward more mobile and agile forces and continued sustainment of numerous high-cost legacy logistics management systems, the requirement for wireless connectivity and a wireless network to supporting organizations has become ever more critical. There are currently several Army communications initiatives underway to resolve this wireless connectivity issue. However, to fully appreciate and understand the value of these initiatives, a Tradeoff Analysis is needed. The present study seeks to identify and assess solutions. The analysis identified issues that impede Interim Brigade Combat Team (IBCT) communication system integration and outlined core requirements for sharing of logistics data between the field and Army battle command systems. Then, the analysis examined wireless communication alternatives as possible solutions for IBCT logistics communications problems. The current baseline system was compared with possible alternatives involving tactical radio systems, wireless/near term digital radio, cellular satellite, and third-generation (3G) wireless technologies. Cellular satellite and 3G wireless technologies offer clear advantages and should be considered for later IBCTs.

  18. International Conference on Mobile and Wireless Technology

    CERN Document Server

    Wattanapongsakorn, Naruemon; Joukov, Nikolai

    2016-01-01

    This book presents the peer-reviewed contributions of ICMWT2016, an international conference devoted to mobile and wireless technology. Researchers and professionals from academia and industry met to discuss the cutting-edge developments in the field. The book includes papers on mobile and wireless networks, the increasingly important security issues, data management, as well as the latest developments in mobile software development.

  19. Wireless Sensor Portal Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Recognizing the needs and challenges facing NASA Earth Science for data input, manipulation and distribution, Mobitrum is proposing a ? Wireless Sensor Portal...

  20. Wireless technology in disease management and medicine.

    Science.gov (United States)

    Clifford, Gari D; Clifton, David

    2012-01-01

    Healthcare information, and to some extent patient management, is progressing toward a wireless digital future. This change is driven partly by a desire to improve the current state of medicine using new technologies, partly by supply-and-demand economics, and partly by the utility of wireless devices. Wired technology can be cumbersome for patient monitoring and can restrict the behavior of the monitored patients, introducing bias or artifacts. However, wireless technologies, while mitigating some of these issues, have introduced new problems such as data dropout and "information overload" for the clinical team. This review provides an overview of current wireless technology used for patient monitoring and disease management. We identify some of the major related issues and describe some existing and possible solutions. In particular, we discuss the rapidly evolving fields of telemedicine and mHealth in the context of increasingly resource-constrained healthcare systems.

  1. Terahertz wireless communications based on photonics technologies.

    Science.gov (United States)

    Nagatsuma, Tadao; Horiguchi, Shogo; Minamikata, Yusuke; Yoshimizu, Yasuyuki; Hisatake, Shintaro; Kuwano, Shigeru; Yoshimoto, Naoto; Terada, Jun; Takahashi, Hiroyuki

    2013-10-07

    There has been an increasing interest in the application of terahertz (THz) waves to broadband wireless communications. In particular, use of frequencies above 275 GHz is one of the strong concerns among radio scientists and engineers, because these frequency bands have not yet been allocated at specific active services, and there is a possibility to employ extremely large bandwidths for ultra-broadband wireless communications. Introduction of photonics technologies for signal generation, modulation and detection is effective not only to enhance the bandwidth and/or the data rate, but also to combine fiber-optic (wired) and wireless networks. This paper reviews recent progress in THz wireless communications using telecom-based photonics technologies towards 100 Gbit/s.

  2. Bluetooth Wireless Technology: A milestone in ICT | Ahmiegbe ...

    African Journals Online (AJOL)

    Bluetooth was compared with other wireless communications technologies specifically Infrared Data Association (IrDA) and Wireless Fidelity (Wi-Fi®) showing their dissimilarities and, above all, the advantages of Bluetooth wireless protocol over the other wireless technologies which have made it a topic of discourse in ICT ...

  3. Ultra wideband technology for wireless sensor networks

    Science.gov (United States)

    Wang, Yue; Xiong, Weiming

    2011-08-01

    Wireless sensor networks (WSNs) have emerged as an important method for planetary surface exploration. To investigate the optimized wireless technology for WSNs, we summarized the key requirements of WSNs and justified ultra wideband (UWB) technology by comparing with other competitive wireless technologies. We also analyzed network topologies as well as physical and MAC layer designs of IEEE 802.15.4a standard, which adopted impulse radio UWB (IR-UWB) technology. Our analysis showed that IR-UWB-based 802.15.4a standard could enable robust communication, precise ranging, and heterogeneous networking for WSNs applications. The result of our present work implies that UWB-based WSNs can be applied to future planetary surface exploration.

  4. RF & wireless technologies know it all

    CERN Document Server

    Fette, Bruce A; Chandra, Praphul; Dobkin, Daniel M; Bensky, Dan; Miron, Douglas B; Lide, David; Dowla, Farid; Olexa, Ron

    2007-01-01

    The Newnes Know It All Series takes the best of what our authors have written to create hard-working desk references that will be an engineer's first port of call for key information, design techniques and rules of thumb. Guaranteed not to gather dust on a shelf!RF (radio frequency) and wireless technologies drive communication today. This technology and its applications enable wireless phones, portable device roaming, and short-range industrial and commercial application communication such as the supply chain management wonder, RFID. Up-to-date information regarding software defined R

  5. Wireless technology for ABC Assessment

    DEFF Research Database (Denmark)

    Kristensen, Margit; Kyng, Morten; Christensen, Erika Frischknecht

      In medical emergency service (EMS) the ABC status (Airway-Breathing-Circulation) of victims is essential in the decision making process regarding prioritizing and treatment. Today's use of information technology does, however, not inform directly about "A" and "B". The parameters are evaluated....... Firstly in the daily EMS work where the collected data can be available at the hospital before the victim arrives and data can be used in the before-arrival-planning process. Secondly in larger incidents with several victims where a WBMS can support rescuers at the incident site in the assessment...

  6. Java Bluetooth wireless technology for evaluating student performance in classroom

    OpenAIRE

    Davidrajuh, Reggie

    2005-01-01

    This paper focuses on the use of Java Bluetooth wireless technology for evaluation of student performance in classroom. First, an introduction to Bluetooth wireless technology is given. Second, use of Java technology for developing wireless applications is explored. Third, a framework is given for identifying the processes involved in education that can make use of mobile technology. Finally, a case study is presented on wireless classroom application for student evaluation.

  7. Next-generation wireless technologies 4G and beyond

    CERN Document Server

    Chilamkurti, Naveen; Chaouchi, Hakima

    2013-01-01

    This comprehensive text/reference examines the various challenges to secure, efficient and cost-effective next-generation wireless networking. Topics and features: presents the latest advances, standards and technical challenges in a broad range of emerging wireless technologies; discusses cooperative and mesh networks, delay tolerant networks, and other next-generation networks such as LTE; examines real-world applications of vehicular communications, broadband wireless technologies, RFID technology, and energy-efficient wireless communications; introduces developments towards the 'Internet o

  8. Wireless technologies for the Construction Sector

    DEFF Research Database (Denmark)

    Heller, Alfred; Orthmann, Christian

    2014-01-01

    and operation efficiency and reducing faults and losses. The paper also lays out requirements expected by the sector. It will be shown that the wireless sensor network technology is a strong competitor that may meet the requirements. By analysing the application of such technologies throughout the building...... lifecycle, the utilization can be manifold, hereby minimising overall economic costs and maximising the added values for all involved stakeholders. Based on the expectations of the sector, the experiences with the introduction of the RFID technology and by estimating the applicability of the extra services...... that follow the wireless sensor network, the paper will line up the requirements that the new technology has to meet to be introduced successfully....

  9. Wireless communication technologies in distribution automation

    Energy Technology Data Exchange (ETDEWEB)

    Takala, J. [VTT Energy, Espoo (Finland)

    1996-12-31

    The project examines four different wireless communication technologies: GSM short message service, NMT data calls, packet radio network, Autonet (Actionet) status message service. The targets for communication include: energy measurement, especially in the de-regulated electricity market, secondary sub-station control, fault indicators. The research concentrates on the usability of different communication technologies for different purposes. Data about response times, error rates, retry times, communication delays, costs etc. will be collected for each communication technology and comparative results will be obtained. Some field experiments and demonstrations will be made in energy measurement and distribution network remote control. The project is divided in four tasks. Each task is described briefly

  10. 2nd International Conference on Mobile and Wireless Technology

    CERN Document Server

    Wattanapongsakorn, Naruemon

    2015-01-01

    This book provides a snapshot of the current state-of-the-art in the fields of mobile and wireless technology, security and applications.  The proceedings of the 2nd International Conference on Mobile and Wireless Technology (ICMWT2015), it represents the outcome of a unique platform for researchers and practitioners from academia and industry to share cutting-edge developments in the field of mobile and wireless science technology, including those working on data management and mobile security.   The contributions presented here describe the latest academic and industrial research from the international mobile and wireless community.  The scope covers four major topical areas: mobile and wireless networks and applications; security in mobile and wireless technology; mobile data management and applications; and mobile software.  The book will be a valuable reference for current researchers in academia and industry, and a useful resource for graduate-level students working on mobile and wireless technology...

  11. Get certified a guide to wireless communication engineering technologies

    CERN Document Server

    Ahson, Syed A

    2009-01-01

    The Institute of Electrical and Electronics Engineers (IEEE) Communications Society designed the IEEE wireless communication engineering technologies (WCET) certification program to address the wireless industry's growing need for communications professionals with practical problem-solving skills in real-world situations. Individuals who achieve this prestigious certification are recognized as possessing the required knowledge, skill, and abilities to meet wireless challenges in various industry, business, corporate, and organizational settings. Presenting contributions from 50 wireless commun

  12. Wireless communication technologies in distribution automation

    Energy Technology Data Exchange (ETDEWEB)

    Takala, J. [VTT Energy, Espoo (Finland)

    1998-08-01

    The project started in mid 1995 and will be finished in 1997. The project examines four different wireless communication technologies: GSM short message service, NMT data calls, packet radio network and Autonet (Actionet) status message service. The targets for communication include: Energy measurement, especially in the de-regulated electricity market, secondary sub-station control and fault indicators. The research has been focused on the usability of different communication technologies for different purposes. Data about response times, reliability, error rates, retry times, communication delays, costs etc. has been collected about each communication technology and comparative results were analysed. Some field experiments and demonstrations will be made in energy measurement and distribution network remote control. The project is divided into four tasks. Each task is described briefly

  13. Development & Implementation of Electric Tram System with Wireless Charging Technology

    OpenAIRE

    DongHo Cho; GuHo Jung; Uooyeol Yoon; Byungsong Lee

    2015-01-01

    In this paper, an electric tram system with a wireless power transfer system based on SMFIR technology is presented. The detailed technology of power-line infra, regulator, and pick-up device is described for train application, respectively. Furthermore, implementation and experimental results for wireless power transfer electric tram are presented

  14. Development & Implementation of Electric Tram System with Wireless Charging Technology

    Directory of Open Access Journals (Sweden)

    DongHo Cho

    2015-06-01

    Full Text Available In this paper, an electric tram system with a wireless power transfer system based on SMFIR technology is presented. The detailed technology of power-line infra, regulator, and pick-up device is described for train application, respectively. Furthermore, implementation and experimental results for wireless power transfer electric tram are presented

  15. Wireless Fidelity (Wi-Fi) Broadband Network Technology: An ...

    African Journals Online (AJOL)

    ... coverage, while Wi-Fi can be integrated with WiMAX networks to provide Internet connectivity to mobile Wi-Fi users. This paper explores the Wi-Fi broadband wireless network technology, its uses, advantages and disadvantages, comparison with other broadband wireless networks and integration with WiMAX network.

  16. Application of wireless sensor network technology in logistics information system

    Science.gov (United States)

    Xu, Tao; Gong, Lina; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen

    2017-04-01

    This paper introduces the basic concepts of active RFID (WSN-ARFID) based on wireless sensor networks and analyzes the shortcomings of the existing RFID-based logistics monitoring system. Integrated wireless sensor network technology and the scrambling point of RFID technology. A new real-time logistics detection system based on WSN and RFID, a model of logistics system based on WSN-ARFID is proposed, and the feasibility of this technology applied to logistics field is analyzed.

  17. Cognitive wireless networks using the CSS technology

    CERN Document Server

    Li, Meiling; Pan, Jeng-Shyang

    2016-01-01

    The aim of this book is to provide some useful methods to improve the spectrum sensing performance in a systematic way, and point out an effective method for the application of cognitive radio technology in wireless communications. The book gives a state-of-the-art survey and proposes some new cooperative spectrum sensing (CSS) methods attempting to achieve better performance. For each CSS, the main idea and corresponding algorithm design are elaborated in detail. This book covers the fundamental concepts and the core technologies of CSS, especially its latest developments. Each chapter is presented in a self-sufficient and independent way so that the reader can select the chapters interesting to them. The methodologies are described in detail so that the readers can repeat the corresponding experiments easily. It will be a useful book for researchers helping them to understand the classifications of CSS, inspiring new ideas about the novel CSS technology for CR, and learning new ideas from the current status...

  18. Optical Wireless Communications - An Emerging Technology

    OpenAIRE

    Utkovski, Zoran

    2015-01-01

    Wireless transmission via optical carriers opens doors of opportunity in areas as yet largely unexplored. Offering significant technical and operational advantages, optical wireless communication (OWC) can be, in some applications, a powerful alternative to and, in others, complementary to existing radio frequency (RF) wireless systems. Variations of OWC can be employed in a diverse range of communication applications ranging from very short-range (on the order of millimetres) optical interco...

  19. Supporting Learning with Wireless Sensor Data

    Directory of Open Access Journals (Sweden)

    Arttu Perttula

    2013-03-01

    Full Text Available In this article, learning is studied in in situ applications that involve sensors. The main questions are how to conceptualize experiential learning involving sensors and what kinds of learning applications using sensors already exist or could be designed. It is claimed that experiential learning, context information and sensor data supports twenty first century learning. The concepts of context, technology-mediated experiences, shared felt experiences and experiential learning theory will be used to describe a framework for sensor-based mobile learning environments. Several scenarios and case examples using sensors and sensor data will be presented, and they will be analyzed using the framework. Finally, the article contributes to the discussion concerning the role of technology-mediated learning experiences and collective sensor data in developing twenty first century learning by characterizing what kinds of skills and competences are supported in learning situations that involve sensors.

  20. Home and School Technology: Wired versus Wireless.

    Science.gov (United States)

    Van Horn, Royal

    2001-01-01

    Presents results of informal research on smart homes and appliances, structured home wiring, whole-house audio/video distribution, hybrid cable, and wireless networks. Computer network wiring is tricky to install unless all-in-one jacketed cable is used. Wireless phones help installers avoid pre-wiring problems in homes and schools. (MLH)

  1. Comparison of Broadband Wireless Access Technology for HAPS Communication

    Directory of Open Access Journals (Sweden)

    Mingxiang GUAN

    2014-03-01

    Full Text Available An information system formed by HAP (High Altitude Platform will be a new generation-system for the wireless communications and HAPS (HAP Station communication system combines the advantages of both terrestrial and satellite communication systems and avoids, to different extents, their disadvantages. Third generation (3G mobile technology which is specified by the third generation partnership project (3 GPP is definitely one of the candidates. With the success of wireless network, the IEEE 802.16 standard, with its wireless metropolitan area network (MAN air interface appears to be a strong competitor. We provide initial practical comparison of these two technologies for HAPS Communication.

  2. Environmental implications of wireless technologies: news delivery and business meetings.

    Science.gov (United States)

    Toffel, Michael W; Horvath, Arpad

    2004-06-01

    Wireless information technologies are providing new ways to communicate, and are one of several information and communication technologies touted as an opportunity to reduce society's overall environmental impacts. However, rigorous system-wide environmental impact comparisons of these technologies to the traditional applications they may replace have only recently been initiated, and the results have been mixed. In this paper, the environmental effects of two applications of wireless technologies are compared to those of conventional technologies for which they can substitute. First, reading newspaper content on a personal digital assistant (PDA) is compared to the traditional way of reading a newspaper. Second, wireless teleconferencing is compared to business travel. The results show that for both comparisons wireless technologies create lower environmental impacts. Compared to reading a newspaper, receiving the news on a PDA wirelessly results in the release of 32-140 times less CO2, several orders of magnitude less NOx and SOx, and the use of 26-67 times less water. Wireless teleconferencing results in 1-3 orders of magnitude lower CO2, NOx, and SO2 emissions than business travel.

  3. Supporting QoS in broadband wireless and wired access

    NARCIS (Netherlands)

    Peelen, Bastien; Zivkovic, Miroslav; Bijwaard, D.; Teunissen, Harold

    2003-01-01

    Wireless local area network (WLAN), cable, and digital subscriber line (xDSL) are among the most popular broadband access technologies in use today. In all such technologies, the transport capacity provided at the level of the physical medium is non-deterministically shared by different traffic

  4. Wireless Technology Use Case Requirement Analysis for Future Space Applications

    Science.gov (United States)

    Abedi, Ali; Wilkerson, DeLisa

    2016-01-01

    This report presents various use case scenarios for wireless technology -including radio frequency (RF), optical, and acoustic- and studies requirements and boundary conditions in each scenario. The results of this study can be used to prioritize technology evaluation and development and in the long run help in development of a roadmap for future use of wireless technology. The presented scenarios cover the following application areas: (i) Space Vehicles (manned/unmanned), (ii) Satellites and Payloads, (iii) Surface Explorations, (iv) Ground Systems, and (v) Habitats. The requirement analysis covers two parallel set of conditions. The first set includes the environmental conditions such as temperature, radiation, noise/interference, wireless channel characteristics and accessibility. The second set of requirements are dictated by the application and may include parameters such as latency, throughput (effective data rate), error tolerance, and reliability. This report provides a comprehensive overview of all requirements from both perspectives and details their effects on wireless system reliability and network design. Application area examples are based on 2015 NASA Technology roadmap with specific focus on technology areas: TA 2.4, 3.3, 5.2, 5.5, 6.4, 7.4, and 10.4 sections that might benefit from wireless technology.

  5. Re-designing Retail Stores with Mobile and Wireless Technologies

    Directory of Open Access Journals (Sweden)

    Riccardo Mangiaracina

    2012-07-01

    Full Text Available Mobile and wireless (M&W technologies have great potential to improve process efficiency and effectiveness within retail stores, but their application is still very limited. One of the main reasons explaining this situation is considered to be the lack of confidence in the actual benefits and, therefore, in the return on investment. As a matter of facts, activities in this context are characterised by great variety and non‐standardised execution and as such the assessment of the costs and benefits of M&W solutions is more difficult than for the upstream tiers of the fast moving consumer goods supply chain (e.g., distribution centres. This paper attempts to provide a contribution for researchers and practitioners by presenting an analytical model to assess the profitability related to investments in multiple M&W solutions for retail stores, thus supporting the decision‐ making process.

  6. Wireless ATM : handover issues

    OpenAIRE

    Jiang, Fan; Käkölä, Timo

    1998-01-01

    Basic aspects of cellular systems and the ATM transmission technology are introduced. Wireless ATM is presented as a combination of radio ATM and mobile ATM. Radio ATM is a wireless extension of an ATM connection while mobile ATM contains the necessary extensions to ATM to support mobility. Because the current ATM technology does not support mobility, handover becomes one of the most important research issues for wireless ATM. Wireless ATM handover requirements are thus analysed. A handover s...

  7. The Future of Mobile Technology and Mobile Wireless Computing

    Science.gov (United States)

    Hart, Jim; Hannan, Mike

    2004-01-01

    It is often stated that mobile wireless computing is going to be the next big technology revolution that will grip the world in the same way mobile telephones did in the 1990s. However, while the technology is rapidly improving, the rate of uptake has been lower than expected. This paper describes some of the reasons for this, and discusses some…

  8. The Challenge of Wireless Connectivity to Support Intelligent Mines

    DEFF Research Database (Denmark)

    Barbosa, Viviane S. B.; Garcia, Luis G. U.; Caldwell, George

    2016-01-01

    The need for continuous safety improvements and increased operational efficiency is driving the mining industry through a transition towards large-scale automation of operations, i.e., “intelligent mines”. The technology promises to remove human operators from harsh or dangerous conditions...... and increase productivity, from extraction all the way to the delivery of a processed product to the customer. In this context, one of the key enablers is wireless connectivity since it allows mining equipment to be remotely monitored and controlled. Simply put, dependable wireless connectivity is essential...... Mobile Radio narrowband systems and mandates the deployment of broadband systems. Furthermore, the (data) traffic requirements of a mine also vary in time as the fleet expands. Additionally, wireless networks are planned according to the characteristics of the scenario in which they will be deployed...

  9. Adapting Wireless Technology to Lighting Control and Environmental Sensing

    Energy Technology Data Exchange (ETDEWEB)

    Dana Teasdale; Francis Rubinstein; Dave Watson; Steve Purdy

    2005-10-01

    The high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multi-sensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 30% lower than a comparable wired system for

  10. Enabling mobile/wireless broadband technologies and services for the next billion users

    CSIR Research Space (South Africa)

    Mekuria, F

    2011-09-01

    Full Text Available As wireless devices and the useful services they can deliver become more pervasive and affordable; the need for wireless broadband technologies meeting the demands of emerging market countries is growing. In this paper the technology choice...

  11. Review of Key Technologies of 5G Wireless Communication System

    Directory of Open Access Journals (Sweden)

    Shi Sha

    2015-01-01

    Full Text Available The 5th generation mobile communication system (5G is oriented towards a new generation of mobile communication system to the year of 2020 and beyond, and its development is still at the exploratory stage. Combining the latest trends in mobile communication development at home and abroad, in this article, we describe the key technologies of driving the 5G research direction. Furthermore, the technical innovation of 5G comes from both wireless and network technologies. In the field of wireless technologies, massive multiple-input multiple-output (MIMO, ultra-wideband spectral, ultra-dense heterogeneous networks, have already become the focus of global industry. In the field of network technologies, a new network architecture based on software-defined networking (SDN becomes the prevailing view worldwide. Additionally, there are some other potential technologies for 5G, such as NOMA, FBMC, mm Waves, and Multi-carrier technology aggregation.

  12. Wireless intelligent alarm technology with pyroelectric infrared sensor

    Science.gov (United States)

    Chen, Xiao

    2009-07-01

    Aiming at the defects of monitoring conducted by man in the conventional practice, we study the passive intelligent automatic alarm technology based on the pyroelectric infrared sensor and wireless communication technology. The designed passive infrared wireless alarm is composed of pyroelectric infrared sensors, infrared special chip BISS0001 and their peripheral circuits. When someone enters into the detecting and monitoring range, the alarm will detect the infrared ray of the human radiation by the contactless form and detect the signals of circuit output. Then it translates them into low frequency signals relative with human sports speed, distance and direction, produce corresponding output signals through amplifying by the back state controller, switch on the work power of the wireless transmitting circuit and make it emit the alarm signals. The system enhances the monitoring level and effects and possesses many advantages such as wide detecting range, long detecting distance and high reliability.

  13. A Survey on Mobility Support in Wireless Body Area Networks

    Science.gov (United States)

    Kim, Beom-Su; Kim, Kyong Hoon; Kim, Ki-Il

    2017-01-01

    Wireless Body Area Networks (WBANs) have attracted research interests from the community, as more promising healthcare applications have a tendency to employ them as underlying network technology. While taking design issues, such as small size hardware as well as low power computing, into account, a lot of research has been proposed to accomplish the given tasks in WBAN. However, since most of the existing works are basically developed by assuming all nodes in the static state, these schemes therefore cannot be applied in real scenarios where network topology between sensor nodes changes frequently and unexpectedly according to human moving behavior. However, as far as the authors know, there is no survey paper to focus on research challenges for mobility support in WBAN yet. To address this deficiency, in this paper, we present the state-of-the-art approaches and discuss the important features of related to mobility in WBAN. We give an overview of mobility model and categorize the models as individual and group. Furthermore, an overview of networking techniques in the recent literature and summary are compiled for comparison in several aspects. The article also suggests potential directions for future research in the field. PMID:28387745

  14. A Survey on Mobility Support in Wireless Body Area Networks

    Directory of Open Access Journals (Sweden)

    Beom-Su Kim

    2017-04-01

    Full Text Available Wireless Body Area Networks (WBANs have attracted research interests from the community, as more promising healthcare applications have a tendency to employ them as underlying network technology. While taking design issues, such as small size hardware as well as low power computing, into account, a lot of research has been proposed to accomplish the given tasks in WBAN. However, since most of the existing works are basically developed by assuming all nodes in the static state, these schemes therefore cannot be applied in real scenarios where network topology between sensor nodes changes frequently and unexpectedly according to human moving behavior. However, as far as the authors know, there is no survey paper to focus on research challenges for mobility support in WBAN yet. To address this deficiency, in this paper, we present the state-of-the-art approaches and discuss the important features of related to mobility in WBAN. We give an overview of mobility model and categorize the models as individual and group. Furthermore, an overview of networking techniques in the recent literature and summary are compiled for comparison in several aspects. The article also suggests potential directions for future research in the field.

  15. ``Low Power Wireless Technologies: An Approach to Medical Applications''

    Science.gov (United States)

    Bellido O., Francisco J.; González R., Miguel; Moreno M., Antonio; de La Cruz F, José Luis

    Wireless communication supposed a great both -quantitative and qualitative, jump in the management of the information, allowing the access and interchange of it without the need of a physical cable connection. The wireless transmission of voice and information has remained in constant evolution, arising new standards like BluetoothTM, WibreeTM or ZigbeeTM developed under the IEEE 802.15 norm. These newest wireless technologies are oriented to systems of communication of short-medium distance and optimized for a low cost and minor consume, becoming recognized as a flexible and reliable medium for data communications across a broad range of applications due to the potential that the wireless networks presents to operate in demanding environments providing clear advantages in cost, size, power, flexibility, and distributed intelligence. About the medical applications, the remote health or telecare (also called eHealth) is getting a bigger place into the manufacturers and medical companies, in order to incorporate products for assisted living and remote monitoring of health parameteres. At this point, the IEEE 1073, Personal Health Devices Working Group, stablish the framework for these kind of applications. Particularly, the 1073.3.X describes the physical and transport layers, where the new ultra low power short range wireless technologies can play a big role, providing solutions that allow the design of products which are particularly appropriate for monitor people’s health with interoperability requirements.

  16. [A wireless mobile monitoring system based on bluetooth technology].

    Science.gov (United States)

    Sun, Shou-jun; Wu, Kai; Wu, Xiao-Ming

    2006-09-01

    This paper presents a wireless mobile monitoring system based on Bluetooth technology. This system realizes the remote mobile monitoring of multiple physiological parameters, and has the characters of easy use, low cost, good reliability and strong capability of anti-jamming.

  17. Advanced relay technologies in next generation wireless communications

    CERN Document Server

    Krikidis, Ioannis

    2016-01-01

    This book details the use of the cooperative networks/relaying approach in new and emerging telecommunications technologies such as full-duplex radio, massive multiple-input multiple-output (MIMO), network coding and spatial modulation, and new application areas including visible light communications (VLC), wireless power transfer, and 5G.

  18. Cross-layer QoS Support for Multimedia Delivery over Wireless Internet

    Directory of Open Access Journals (Sweden)

    Zhang Qian

    2005-01-01

    Full Text Available Delivering multimedia over wireless Internet is a very challenging task. Multimedia delivery inherently has strict quality of service (QoS requirement on bandwidth, delay, and delay jitter. However, the current Internet can only support best-effort service, which imposes varying network conditions during multimedia delivery. The advent of wireless networks further exacerbates the variance of network conditions and brings greater challenges for multimedia delivery. To improve perceived media quality by end users over wireless Internet, QoS supports can be addressed in different layers, including application layer, transport layer, link layer, and so forth. This paper presents a framework, which provides QoS support, for multimedia delivery over wireless Internet, across different layers. To provide efficient QoS support for different types of media over the best-effort networks, we first propose a cross-layer architecture, which combines the application-level, transport-layer, as well as link-layer controls, and then review recent advances in each individual component. Specifically, dynamic estimation of varying channel and network, adaptive and energy-efficient application and link-level error control, efficient congestion control, header compression, adaptive automatic repeat request (ARQ and priority-based scheduling, as well as QoS-adaptive proxy caching technologies are explicitly reviewed in this paper.

  19. Industrial Wireless Technology for the 21st Century

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-12-01

    In July 2002, the U.S. Department of Energy's Industrial Technologies Program sponsored the Industrial Wireless Workshop as a forum for articulating some long-term goals that may help guide the development of industrial wireless sensor systems. Over 30 individuals, representing manufacturers and suppliers, end users, universities, and national laboratories, attended the workshop in San Francisco and participated in a series of facilitated sessions. The workshop participants cooperatively developed a unified vision for the future and defined specific goals and challenges. This document presents the results of the workshop as well as some context for non-experts.

  20. Wireless Avionics Packet to Support Fault Tolerance for Flight Applications

    Science.gov (United States)

    Block, Gary L.; Whitaker, William D.; Dillon, James W.; Lux, James P.; Ahmad, Mohammad

    2009-01-01

    In this protocol and packet format, data traffic is monitored by all network interfaces to determine the health of transmitter and subsystems. When failures are detected, the network inter face applies its recover y policies to provide continued service despite the presence of faults. The protocol, packet format, and inter face are independent of the data link technology used. The current demonstration system supports both commercial off-the-shelf wireless connections and wired Ethernet connections. Other technologies such as 1553 or serial data links can be used for the network backbone. The Wireless Avionics packet is divided into three parts: a header, a data payload, and a checksum. The header has the following components: magic number, version, quality of service, time to live, sending transceiver, function code, payload length, source Application Data Interface (ADI) address, destination ADI address, sending node address, target node address, and a sequence number. The magic number is used to identify WAV packets, and allows the packet format to be updated in the future. The quality of service field allows routing decisions to be made based on this value and can be used to route critical management data over a dedicated channel. The time to live value is used to discard misrouted packets while the source transceiver is updated at each hop. This information is used to monitor the health of each transceiver in the network. To identify the packet type, the function code is used. Besides having a regular data packet, the system supports diagnostic packets for fault detection and isolation. The payload length specifies the number of data bytes in the payload, and this supports variable-length packets in the network. The source ADI is the address of the originating interface. This can be used by the destination application to identify the originating source of the packet where the address consists of a subnet, subsystem class within the subnet, a subsystem unit

  1. Wireless communication technology for modular mechatronic controllers

    CSIR Research Space (South Africa)

    Bright, G

    2010-08-01

    Full Text Available to modular architecture. Communication technology allows for the systematic integration of mechatronics sub-systems in order to achieve complex integrated mechatronics system which would be difficult to achieve without the use of information technology (IT...

  2. Wireless technologies for closed-loop retinal prostheses

    Science.gov (United States)

    Ng, David C.; Bai, Shun; Yang, Jiawei; Tran, Nhan; Skafidas, Efstratios

    2009-12-01

    In this paper, we discuss various technologies needed to develop retinal prostheses with wireless power and data telemetry operation. In addition to the need to communicate with the implanted device, supply of power to the retinal prosthesis is especially difficult. This is because, in the implanted state, the device is not fixed in position due to constant motion of the eye. Furthermore, a retinal prosthesis incorporating a high density electrode array of more than 1000 electrodes is expected to consume approximately 45 mW of power and require 300 kbps of image and stimulation data. The front end of the wireless power and data transmission, the antenna, needs to be small compared to the size of the eye. Also, the wireless module is expected to operate in the reactive near-field region due to small separation between the transmit and receive antennas compared to their size and corresponding operating wavelength. An inductive link is studied as a means to transfer power and for data telemetry between the implant and external unit. In this work, the use of integrated circuit and microfabrication technologies for implementing inductive links is discussed. A closed-loop approach is taken to improve performance and reach optimum operation condition. Design and simulation data are presented as the basis for development of viable wireless module prototypes.

  3. Microwave Photonics Techniques Supporting Flexible Wireless Communications Links

    DEFF Research Database (Denmark)

    Rommel, Simon; Cavalcante, Lucas Costa Pereira; Vegas Olmos, Juan José

    Wireless data communication links supporting the next generation 5G and beyond mobile networking face a set of engineering challenges related to the mandatory operation at mmw and higher frequency bands, provide capacities above 10 Gb/s, satisfy latency, robustness, flexibility and low complexity...... constrains. Microwave photonic techniques support a number of key functionalities required to satisfy above-mentioned demands. We will review, in particular, experimental realizations of a number of functionalities such as mmw generation, detection, optical fiber transport and multi-Gigabit data transmission...

  4. Cooperative MIMO technology in multiple hops wireless sensor networks

    Science.gov (United States)

    Yuan, Lina; Chen, Huajun; Gong, Jing

    2017-03-01

    The limited lifetime is one of the important factors restricted wireless sensor networks (WSNs), when possible, wireless nodes often operate with small batteries, while battery replacement is a very difficult and expensive. So the nodes must work long hours in the case of no battery replacement. Therefore, in WSNs, minimizing energy consumption is an important design consideration, at the same time, the transmission strategies of energy efficiency must be used for data forwarding. This paper, using cooperative multiple input multiple output(MIMO) technology combined with multiple hops technology, has put forward a new transmission model, i.e., the MIMO-MISO(multi-input multi-output)/MIMO-MIMO model. Simulation results demonstrate the proposed MIMO-MISO/MIMO-MIMO to minimize energy consumption of each node every node for multi-hop WSNs, to save a great deal of energy for a larger transmission distance, which makes the life of the entire network be extended.

  5. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Zvi H. Meiksin

    2004-03-01

    A comprehensive mine-wide, two-way wireless voice and data communication system for the underground mining industry was developed. The system achieves energy savings through increased productivity and greater energy efficiency in meeting safety requirements within mines. The mine-wide system is comprised of two interfaced subsystems: a through-the-earth communications system and an in-mine communications system. The mine-wide system permits two-way communication among underground personnel and between underground and surface personnel. The system was designed, built, and commercialized. Several systems are in operation in underground mines in the United States. The use of these systems has proven they result in considerable energy savings. A system for tracking the location of vehicles and people within the mine was also developed, built and tested successfully. Transtek's systems are being used by the National Institute of Occupational Safety and Health (NIOSH) in their underground mine rescue team training program. This project also resulted in a spin-off rescue team lifeline and communications system. Furthermore, the project points the way to further developments that can lead to a GPS-like system for underground mines allowing the use of autonomous machines in underground mining operations, greatly reducing the amount of energy used in these operations. Some products developed under this program are transferable to applications in fields other than mining. The rescue team system is applicable to use by first responders to natural, accidental, or terrorist-caused building collapses. The in-mine communications system can be installed in high-rise buildings providing in-building communications to security and maintenance personnel as well as to first responders.

  6. An experimental study of cross-technology interference in in-vehicle wireless sensor networks

    NARCIS (Netherlands)

    Tavakoli, R.; Nabi, M.; Basten, T.; Goossens, K.

    2016-01-01

    Wireless in-vehicle networks are considered as a flexible and cost-efficient solution for the new generation of cars. One of the candidate wireless technologies for these wireless sensor networks is the IEEE 802.15.4 standard which operates in the 2.4 GHz ISM band. This is while the number of

  7. A key technology for standardizing outdoor optical wireless communications

    Directory of Open Access Journals (Sweden)

    Yuwei Su

    2017-06-01

    Full Text Available In this paper, we introduce a key technology, polarization modulation (PM, which should be taken into account when standardizing outdoor optical wireless communications (OWC, also known as free-space optical communications (FSO. We analyze the distortion of the polarization state when a laser beam propagates through the atmospheric channel. The floating range of the optical polarization was estimated and the necessity of researching the proposed technology was discussed. Moreover, we conducted a comparison between the PM-based FSO system and intensity modulation-based FSO system. The conclusions will be helpful in establishing the FSO standard architectures.

  8. 77 FR 1708 - Cooperative Research and Development Agreement: Technology To Provide Wireless Precise Time...

    Science.gov (United States)

    2012-01-11

    ..., disadvantages, performance, costs, and other issues associated with using alternative wireless time technology... SECURITY Coast Guard Cooperative Research and Development Agreement: Technology To Provide Wireless Precise... Agreements (CRADAs), are authorized by the Federal Technology Transfer Act of 1986 (Pub. L. 99- 502, codified...

  9. How 5G Wireless (and Concomitant Technologies Will Revolutionize Healthcare?

    Directory of Open Access Journals (Sweden)

    Siddique Latif

    2017-12-01

    Full Text Available The need to have equitable access to quality healthcare is enshrined in the United Nations (UN Sustainable Development Goals (SDGs, which defines the developmental agenda of the UN for the next 15 years. In particular, the third SDG focuses on the need to “ensure healthy lives and promote well-being for all at all ages”. In this paper, we build the case that 5G wireless technology, along with concomitant emerging technologies (such as IoT, big data, artificial intelligence and machine learning, will transform global healthcare systems in the near future. Our optimism around 5G-enabled healthcare stems from a confluence of significant technical pushes that are already at play: apart from the availability of high-throughput low-latency wireless connectivity, other significant factors include the democratization of computing through cloud computing; the democratization of Artificial Intelligence (AI and cognitive computing (e.g., IBM Watson; and the commoditization of data through crowdsourcing and digital exhaust. These technologies together can finally crack a dysfunctional healthcare system that has largely been impervious to technological innovations. We highlight the persistent deficiencies of the current healthcare system and then demonstrate how the 5G-enabled healthcare revolution can fix these deficiencies. We also highlight open technical research challenges, and potential pitfalls, that may hinder the development of such a 5G-enabled health revolution.

  10. Wireless body area networks technology, implementation, and applications

    CERN Document Server

    Yuce, Mehmet R

    2011-01-01

    The book provides a comprehensive overview for the latest WBAN systems, technologies, and applications. The chapters of the book have been written by various specialists who are experts in their areas of research and practice. The book starts with the basic techniques involved in designing and building WBAN systems. It explains the deployment issues and then moves into the application areas of WBAN. The remaining chapters focus on the development of hardware, signal processing algorithms, and wireless communication and network design for wearable and implantable body sensors used in WBAN appli

  11. Determinants of Mobile Wireless Technology for Promoting Interactivity in Lecture Sessions: An Empirical Analysis

    Science.gov (United States)

    Gan, Chin Lay; Balakrishnan, Vimala

    2014-01-01

    The aim of this paper is to identify adoption factors of mobile wireless technology to increase interactivity between lecturers and students during lectures. A theoretical framework to ascertain lecturers' intentions to use mobile wireless technology during lectures (dependent variable) is proposed with seven independent variables. The…

  12. [Advances in sensor node and wireless communication technology of body sensor network].

    Science.gov (United States)

    Lin, Weibing; Lei, Sheng; Wei, Caihong; Li, Chunxiang; Wang, Cang

    2012-06-01

    With the development of the wireless communication technology, implantable biosensor technology, and embedded system technology, Body Sensor Network (BSN) as one branch of wireless sensor networks and important part of the Internet of things has caught more attention of researchers and enterprises. This paper offers the basic concept of the BSN and analyses the related research. We focus on sensor node and wireless communication technology from perspectives of technology challenges, research advance and development trend in the paper. Besides, we also present a relative overview of domestic and overseas projects for the BSN.

  13. Existing PON Infrastructure Supported Hybrid Fiber-Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Yu, Xianbin; Zhao, Ying; Deng, Lei

    2012-01-01

    We propose a hybrid fiber wireless sensor network based on the existing PON infrastructure. The feasibility of remote sensing and PON convergence is experimentally proven by transmitting direct-sequence spread-spectrum wireless sensing and 2.5Gbps GPON signals.......We propose a hybrid fiber wireless sensor network based on the existing PON infrastructure. The feasibility of remote sensing and PON convergence is experimentally proven by transmitting direct-sequence spread-spectrum wireless sensing and 2.5Gbps GPON signals....

  14. Using Internet of Things technologies for wireless sensor networks

    Science.gov (United States)

    Martinez, K.; Hart, J. K.; Basford, P. J.; Bragg, G. M.; Ward, T.

    2013-12-01

    Numerous authors have envisioned the future internet where anything will be connected: the Internet of Things (IoT). The idea is an extrapolation of the spread of networked devices such as phones, tablets etc. Each device is expected to have its own Internet address and thus be easy to access. The key building blocks of any IoT system are networking, hardware platforms and node software - so they are similar to wireless sensor network requirements. Most existing IoT demonstrators and applications have been gadget-style objects where power and connectivity problems are not too restricting. Environmental sensor networks can benefit from using some of the technologies involved in IoT development. However it is expected that tuning the networking and power management will be necessary to make them as efficient as state of the art wireless sensor networks. Some IoT assumptions such as always-connected nodes and full IP capability need to be considered. This paper will illustrate the advantages and disadvantages of IoT techniques for environment sensing drawing on a range of employment scenarios. We also describe a glacial 'Internet of things' project, which aims to monitor glacial processes. In particular we describe the IoT developments in a deployment in Iceland to examine glacier seismicity, velocity and provide camera images.

  15. India: a Case of Fragile Wireless Service and Technology Adoption?

    NARCIS (Netherlands)

    L-F. Pau (Louis-François); J. Motiwalla

    2007-01-01

    textabstractWireless penetration and the Indian economy have grown significantly over the past few years, but how robust and sustainable is the adoption of wireless services and products? Several papers have discussed India as a wireless service and product market, and sometimes tried to assess

  16. Wireless Communications and Networking Technologies for Smart Grid: Paradigms and Challenges

    OpenAIRE

    Fang, Xi; Yang, Dejun; Xue, Guoliang

    2011-01-01

    Smart grid, regarded as the next generation power grid, uses two-way flows of electricity and information to create a widely distributed automated energy delivery network. In this work we present our vision on smart grid from the perspective of wireless communications and networking technologies. We present wireless communication and networking paradigms for four typical scenarios in the future smart grid and also point out the research challenges of the wireless communication and networking ...

  17. Wireless Instrumentation Use on Launch Vehicles

    Science.gov (United States)

    Sherman, Aaron

    2010-01-01

    This slide presentation reviews the results of a study on the use of wireless instrumentation and sensors on future launch vehicles. The use of wireless technologies would if feasible would allow for fewer wires, and allow for more flexibility. However, it was generally concluded that wireless solutions are not currently ready to replace wired technologies for launch vehicles. The recommendations of the study were to continue to use wired sensors as the primary choice for vehicle instrumentation, and to continue to assess needs and use wireless instrumentation where appropriate. The future work includes support efforts for wireless technologies, and continue to monitor the development of wireless solutions.

  18. Autonomous vision networking: miniature wireless sensor networks with imaging technology

    Science.gov (United States)

    Messinger, Gioia; Goldberg, Giora

    2006-09-01

    The recent emergence of integrated PicoRadio technology, the rise of low power, low cost, System-On-Chip (SOC) CMOS imagers, coupled with the fast evolution of networking protocols and digital signal processing (DSP), created a unique opportunity to achieve the goal of deploying large-scale, low cost, intelligent, ultra-low power distributed wireless sensor networks for the visualization of the environment. Of all sensors, vision is the most desired, but its applications in distributed sensor networks have been elusive so far. Not any more. The practicality and viability of ultra-low power vision networking has been proven and its applications are countless, from security, and chemical analysis to industrial monitoring, asset tracking and visual recognition, vision networking represents a truly disruptive technology applicable to many industries. The presentation discusses some of the critical components and technologies necessary to make these networks and products affordable and ubiquitous - specifically PicoRadios, CMOS imagers, imaging DSP, networking and overall wireless sensor network (WSN) system concepts. The paradigm shift, from large, centralized and expensive sensor platforms, to small, low cost, distributed, sensor networks, is possible due to the emergence and convergence of a few innovative technologies. Avaak has developed a vision network that is aided by other sensors such as motion, acoustic and magnetic, and plans to deploy it for use in military and commercial applications. In comparison to other sensors, imagers produce large data files that require pre-processing and a certain level of compression before these are transmitted to a network server, in order to minimize the load on the network. Some of the most innovative chemical detectors currently in development are based on sensors that change color or pattern in the presence of the desired analytes. These changes are easily recorded and analyzed by a CMOS imager and an on-board DSP processor

  19. A Wireless Physiological Signal Monitoring System with Integrated Bluetooth and WiFi Technologies.

    Science.gov (United States)

    Yu, Sung-Nien; Cheng, Jen-Chieh

    2005-01-01

    This paper proposes a wireless patient monitoring system which integrates Bluetooth and WiFi wireless technologies. A wireless portable multi-parameter device was designated to acquire physiological signals and transmit them to a local server via Bluetooth wireless technology. Four kinds of monitor units were designed to communicate via the WiFi wireless technology, including a local monitor unit, a control center, mobile devices (personal digital assistant; PDA), and a web page. The use of various monitor units is intending to meet different medical requirements for different medical personnel. This system was demonstrated to promote the mobility and flexibility for both the patients and the medical personnel, which further improves the quality of health care.

  20. Research progress of wireless power transmission technology and the related problems

    Science.gov (United States)

    Li, Jianliang

    2017-03-01

    Wireless Power Transfer (WPT) has been widely used in recent years, it has the advantages of high transmission efficiency, long transmission distance, and so on. Firstly, this paper introduces the application progress of transmission technology at home and abroad. Secondly, combined with the development of the current technology, this paper puts forward the basic problems of wireless power transmission technology from four aspects. Lastly, the paper summarizes and puts forward the current hot and difficult problems.

  1. Bluetooth: The invisible connector. Short-range wireless technology for the contemporary orthodontic practice.

    Science.gov (United States)

    Mupparapu, Muralidhar

    2007-06-01

    Although it sounds like a nonvital tooth, Bluetooth is actually one of technology's hottest trends. It is an industrial specification for wireless personal area networks, but for a busy orthodontic practice, it translates to freedom from cables and cords. Despite its enigmatic name, Bluetooth-based devices and the wireless technology that these gadgets work with are here to stay. They promise to make life easier for the electronic-device users of all stripes, and orthodontists are no exception. The purpose of this article is to orient orthodontists, office staff, and auxiliary personnel to this universal wireless technology that is slowly becoming an integral part of every office.

  2. 78 FR 49529 - Radio Frequency Wireless Technology in Medical Devices; Guidance for Industry and Food and Drug...

    Science.gov (United States)

    2013-08-14

    ... HUMAN SERVICES Food and Drug Administration (formerly Docket No. 2006D-0504) Radio Frequency Wireless...) is announcing the availability of the guidance entitled ``Radio Frequency Wireless Technology in... considerations related to the incorporation and integration of radio frequency (RF) wireless technology in...

  3. A Review on Radio-Over-Fiber Technology-Based Integrated (Optical/Wireless) Networks

    Science.gov (United States)

    Rajpal, Shivika; Goyal, Rakesh

    2017-06-01

    In the present paper, radio-over-fiber (RoF) technology has been proposed, which is the integration of the optical and radio networks. With a high transmission capacity, comparatively low cost and low attenuation, optical fiber provides an ideal solution for accomplishing the interconnections. In addition, a radio system enables the significant mobility, flexibility and easy access. Therefore, the system integration can meet the increasing demands of subscribers for voice, data and multimedia services that require the access network to support high data rates at any time and any place inexpensively. RoF has the potentiality to the backbone of the wireless access network and it has gained significant momentum in the last decade as a potential last-mile access scheme. This paper gives the comprehensive review of RoF technology used in the communication system. Concept, applications, advantages and limitations of RoF technology are also discussed in this paper.

  4. Information Technologies supporting students’ mobility

    OpenAIRE

    D. Morawska-Walasek; J. Piątkowski; T. Walasek

    2007-01-01

    Purpose: ESMOS is a project financially supported by the SOCRATES/Minerva European Commission initiative, which aims to enhance student mobility through online support. The ESMOS partnership has explored existing practice in student mobility support, particularly investigating how technology is being utilised to support students. It has also examined the factors that affect exchange students and has identified problems with meeting student mobility numbers.Design/methodology/approach: The r...

  5. Future networks and technologies supporting innovative communications

    DEFF Research Database (Denmark)

    Prasad, Ramjee

    2012-01-01

    and applications. This paper focuses on the technological aspects of ubiquitous networking and communication technologies, including challenges related to green communications, and security, privacy and trust. The paper proposes a novel concept for a Wireless Innovative System for Dynamically Operating Mega......-communications (WISDOM) that combines the aspects of personal- and cognitive radio- networks to let seamlessly bridge the virtual and physical worlds offering a constant level of all-senses, context-based, rich communication experience over fixed and wireless networks for the end users while realizing a new generation...

  6. Technology support for participatory budgeting

    DEFF Research Database (Denmark)

    Rose, Jeremy; Rios, Jesus; Lippa, Barbara

    2010-01-01

    and match them to the generic participatory budgeting processes. This results in a comprehensive picture of how known eParticipation technologies can be used to support participatory budgeting. The next research question (unfortunately beyond the scope of this article) is how to choose - which technologies...

  7. Secure, Mobile, Wireless Network Technology Designed, Developed, and Demonstrated

    Science.gov (United States)

    Ivancic, William D.; Paulsen, Phillip E.

    2004-01-01

    The inability to seamlessly disseminate data securely over a high-integrity, wireless broadband network has been identified as a primary technical barrier to providing an order-of-magnitude increase in aviation capacity and safety. Secure, autonomous communications to and from aircraft will enable advanced, automated, data-intensive air traffic management concepts, increase National Air Space (NAS) capacity, and potentially reduce the overall cost of air travel operations. For the first time ever, secure, mobile, network technology was designed, developed, and demonstrated with state-ofthe- art protocols and applications by a diverse, cooperative Government-industry team led by the NASA Glenn Research Center. This revolutionary technology solution will make fundamentally new airplane system capabilities possible by enabling secure, seamless network connections from platforms in motion (e.g., cars, ships, aircraft, and satellites) to existing terrestrial systems without the need for manual reconfiguration. Called Mobile Router, the new technology autonomously connects and configures networks as they traverse from one operating theater to another. The Mobile Router demonstration aboard the Neah Bay, a U.S. Coast Guard vessel stationed in Cleveland, Ohio, accomplished secure, seamless interoperability of mobile network systems across multiple domains without manual system reconfiguration. The Neah Bay was chosen because of its low cost and communications mission similarity to low-Earth-orbiting satellite platforms. This technology was successfully advanced from technology readiness level (TRL) 2 (concept and/or application formation) to TRL 6 (system model or prototype demonstration in a relevant environment). The secure, seamless interoperability offered by the Mobile Router and encryption device will enable several new, vehicle-specific and systemwide technologies to perform such things as remote, autonomous aircraft performance monitoring and early detection and

  8. Enhancing Time Synchronization Support in Wireless Sensor Networks.

    Science.gov (United States)

    Tavares Bruscato, Leandro; Heimfarth, Tales; Pignaton de Freitas, Edison

    2017-12-20

    With the emerging Internet of Things (IoT) technology becoming reality, a number of applications are being proposed. Several of these applications are highly dependent on wireless sensor networks (WSN) to acquire data from the surrounding environment. In order to be really useful for most of applications, the acquired data must be coherent in terms of the time in which they are acquired, which implies that the entire sensor network presents a certain level of time synchronization. Moreover, to efficiently exchange and forward data, many communication protocols used in WSN rely also on time synchronization among the sensor nodes. Observing the importance in complying with this need for time synchronization, this work focuses on the second synchronization problem, proposing, implementing and testing a time synchronization service for low-power WSN using low frequency real-time clocks in each node. To implement this service, three algorithms based on different strategies are proposed: one based on an auto-correction approach, the second based on a prediction mechanism, while the third uses an analytical correction mechanism. Their goal is the same, i.e., to make the clocks of the sensor nodes converge as quickly as possible and then to keep them most similar as possible. This goal comes along with the requirement to keep low energy consumption. Differently from other works in the literature, the proposal here is independent of any specific protocol, i.e., it may be adapted to be used in different protocols. Moreover, it explores the minimum number of synchronization messages by means of a smart clock update strategy, allowing the trade-off between the desired level of synchronization and the associated energy consumption. Experimental results, which includes data acquired from simulations and testbed deployments, provide evidence of the success in meeting this goal, as well as providing means to compare these three approaches considering the best synchronization

  9. Wireless Access

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Wireless Access. Wireless connect to the Base station. Easy and Convenient access. Costlier as compared to the wired technology. Reliability challenges. We see it as a complementary technology to the DSL.

  10. An Overview on Wireless Sensor Networks Technology and Evolution

    Directory of Open Access Journals (Sweden)

    Chiara Buratti

    2009-08-01

    Full Text Available Wireless sensor networks (WSNs enable new applications and require non-conventional paradigms for protocol design due to several constraints. Owing to the requirement for low device complexity together with low energy consumption (i.e., long network lifetime, a proper balance between communication and signal/data processing capabilities must be found. This motivates a huge effort in research activities, standardization process, and industrial investments on this field since the last decade. This survey paper aims at reporting an overview of WSNs technologies, main applications and standards, features in WSNs design, and evolutions. In particular, some peculiar applications, such as those based on environmental monitoring, are discussed and design strategies highlighted; a case study based on a real implementation is also reported. Trends and possible evolutions are traced. Emphasis is given to the IEEE 802.15.4 technology, which enables many applications of WSNs. Some example of performance characteristics of 802.15.4-based networks are shown and discussed as a function of the size of the WSN and the data type to be exchanged among nodes.

  11. An Overview on Wireless Sensor Networks Technology and Evolution

    Science.gov (United States)

    Buratti, Chiara; Conti, Andrea; Dardari, Davide; Verdone, Roberto

    2009-01-01

    Wireless sensor networks (WSNs) enable new applications and require non-conventional paradigms for protocol design due to several constraints. Owing to the requirement for low device complexity together with low energy consumption (i.e., long network lifetime), a proper balance between communication and signal/data processing capabilities must be found. This motivates a huge effort in research activities, standardization process, and industrial investments on this field since the last decade. This survey paper aims at reporting an overview of WSNs technologies, main applications and standards, features in WSNs design, and evolutions. In particular, some peculiar applications, such as those based on environmental monitoring, are discussed and design strategies highlighted; a case study based on a real implementation is also reported. Trends and possible evolutions are traced. Emphasis is given to the IEEE 802.15.4 technology, which enables many applications of WSNs. Some example of performance characteristics of 802.15.4-based networks are shown and discussed as a function of the size of the WSN and the data type to be exchanged among nodes. PMID:22423202

  12. Wireless Power Transmission Technology State-Of-The-Art

    Science.gov (United States)

    Dickinson, R. M. T.

    2002-01-01

    devices for microwave ovens are approximately O.O25/W, due to the large manufacturing quantities. Comparable, remanufactured lasers for industrial applications at the 4 kW CW level are of order 25/W. Industrial klystrons cost over 1/W and solid state power amplifiers cost over 3/W. Model tethered helicopters, model airplanes, a smal1 airship and several small rovers have been powered with microwave beams at 2.45, 5.8 and 35 GHz. Smal1 rovers have been powered with laser beams. Two space-to-space microwave power link experiments have been conducted by the Japanese and with Texas A&M assistance in one case. International records for WPT link electric power delivered, range, 1ink efficiency and other salient parameters for both wireless-laser and -microwave power demonstrations win be reviewed. Also, costing models for WPT -system figure- of-merit (FOM) in terms of capital costs, in /MW -km, as a fonction of range and power level are reviewed. Records in Japan. France, Korea, Russia, Canada and the US will be reviewed for various land based WPT demonstrations. SSP applicable elements of technology in fiber and wireless links, cell phones and base stations, aircraft, and spacecraft phased arrays, industrial and scientific klystrons and lasers, military equipment (where information is available in open literature) microwave heating, and other telecommunication activities win be presented, concerning power handling, frequency or wavelength, conversion efficiency, specific mass, specific cost, etc. Previously studied and proposed applications of WPT technology will be presented to show the range of WPT technology being considered for commercial and other applications that will lead to advancing the SOA of WPT technology that win benefit SSP .

  13. Loss Discrimination Algorithm for Wired/Wireless Networks

    OpenAIRE

    Liw J. Seng; Mohd N. Derahman; Azizol Abdullah

    2011-01-01

    Problem statement: Wireless technology has far growing with an increasing demand of the Wireless networking technologies recent years. The wireless access network and cellular networks are being used to support their need. It is usually connected to a wired backbone network. TCP is used to handle the congestion in wired network. However, it is not well suited for hybrid network consisting of wired and wireless networks. Packet loss occurs in wireless network mostly due to high bit error rate,...

  14. Design of Wireless Point of Sale Based on ZigBee Technology

    Directory of Open Access Journals (Sweden)

    Xiaoning Jiang

    2014-02-01

    Full Text Available With the rapid development of Point of Sale technology and modern communication technology, financial Point of Sale terminal system has been started from wired to wireless. Wireless payment technology can used where can’t rely on or even no cable network. As one of the most important technologies in the information era, Wireless Sensor Network has been widely used in banking business and other various modem business fields. This paper describes a kind of simple portable Point of Sale terminal based on the ZigBee wireless network 1, which is a low power, low cost, flexible, safe and reliable network. This Point of Sale system can be applied gas stations, liquefied petroleum gas stations and other complex sales environment, and it improves safety of gas station and personnel safety. Simple and user-friendly, this formula design and optimization method greatly improves efficiency and thus has much value for practical application.

  15. Overview and evaluation of bluetooth low energy: an emerging low-power wireless technology

    National Research Council Canada - National Science Library

    Gomez, Carles; Oller, Joaquim; Paradells, Josep

    2012-01-01

    Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years...

  16. Understanding Wireless Communications in Public Safety: A Guidebook to Technology, Issues, Planning, and Management

    Science.gov (United States)

    2000-08-01

    This guidebook is divided into four parts: Part 1. Planning and Managing a Communications Project: Discusses the overall scope of a project, including planning, funding, procurement, and management. Part 2. Wireless Communications Technology: Discuss...

  17. Wireless technology infrastructures for authentication of patients: PKI that rings.

    Science.gov (United States)

    Sax, Ulrich; Kohane, Isaac; Mandl, Kenneth D

    2005-01-01

    As the public interest in consumer-driven electronic health care applications rises, so do concerns about the privacy and security of these applications. Achieving a balance between providing the necessary security while promoting user acceptance is a major obstacle in large-scale deployment of applications such as personal health records (PHRs). Robust and reliable forms of authentication are needed for PHRs, as the record will often contain sensitive and protected health information, including the patient's own annotations. Since the health care industry per se is unlikely to succeed at single-handedly developing and deploying a large scale, national authentication infrastructure, it makes sense to leverage existing hardware, software, and networks. This report proposes a new model for authentication of users to health care information applications, leveraging wireless mobile devices. Cell phones are widely distributed, have high user acceptance, and offer advanced security protocols. The authors propose harnessing this technology for the strong authentication of individuals by creating a registration authority and an authentication service, and examine the problems and promise of such a system.

  18. Review of Radio Frequency Identification and Wireless Technology for Structural Health Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Dhital, Dipesh; Chia, Chen Ciang; Lee, Jung Ryul [Chonbuk National University, Jeonju (Korea, Republic of); Park, Chan Yik [Aeronautical Technology Directorate, Agency for Defense Development, Daejeon (Korea, Republic of)

    2010-06-15

    Radio frequency identification(RFID) combined with wireless technology has good potential for structural health monitoring(SHM). We describe several advantages of RFID and wireless technologies for SHM, and review SHM examples with working principles, design and technical details for damage detection, heat exposure monitoring, force/strain sensing, and corrosion detection in concrete, steel, carbon fiber reinforced polymer(CFRP), and other materials. Various sensors combined with wireless communication are also discussed. These methodologies can be readily developed, implemented, and customized. There are some technical difficulties, but solutions are being addressed. Lastly, a surface acoustic wave-based RFID system is presented, and possible future trends of SHM based on RFID and wireless technology are presented

  19. A wireless video monitoring system based on 3G communication technology

    Science.gov (United States)

    Xia, Zhen-Hua; Wang, Xiao-Shuang

    2011-11-01

    With the rapid development of the electronic technology, multimedia technology and mobile communication technology, video monitoring system is going to the embedded, digital and wireless direction. In this paper, a solution of wireless video monitoring system based on WCDMA is proposed. This solution makes full use of the advantages of 3G, which have Extensive coverage network and wide bandwidth. It can capture the video streaming from the chip's video port, real-time encode the image data by the high speed DSP, and have enough bandwidth to transmit the monitoring image through WCDMA wireless network. The experiments demonstrate that the system has the advantages of high stability, good image quality, good transmission performance, and in addition, the system has been widely used, not be restricted by geographical position since it adopts wireless transmission. So, it is suitable used in sparsely populated, harsh environment scenario.

  20. Transport Schemes for Fiber-Wireless Technology: Transmission Performance and Energy Efficiency

    Directory of Open Access Journals (Sweden)

    Christina Lim

    2014-04-01

    Full Text Available Fiber-wireless technology has been actively researched as a potential candidate for next generation broadband wireless signal distribution. Despite the popularity, this hybrid scheme has many technical challenges that impede the uptake and commercial deployment. One of the inherent issues is the transport of the wireless signals over a predominantly digital optical network in today’s telecommunication infrastructure. Many different approaches have been introduced and demonstrated with digitized RF transport of the wireless signals being the most compatible with the existing optical fiber networks. In this paper, we review our work in the area of digitized RF transport to address the inherent issues related to analog transport in the fiber-wireless links and compare the transmission performance and energy efficiency with the other transport strategies.

  1. Wireless roadside inspection phase II : final report : [technology brief].

    Science.gov (United States)

    2014-04-01

    The Federal Motor Carrier Safety Administration (FMCSA) Wireless Roadside Inspection (WRI) Program is demonstrating the feasibility and value of electronically assessing truck and motorcoach driver and vehicle safety. Electronic assessments (or WRIs)...

  2. Non-Ionizing Radiation From Wireless Technology| RadTown ...

    Science.gov (United States)

    2017-10-31

    Cell phones emit radio frequency (RF) energy. The Federal Communications Commission (FCC) sets safety guidelines to limit RF exposure from wireless devices. Scientists continue to study the effects of long-term exposure to low levels of RF.

  3. New Methods and Models in Wireless Networks: Multigraphs--Games--Mechanism Design

    Science.gov (United States)

    Tran, Dung Trung

    2010-01-01

    The recent evolution of wireless technology makes wireless devices ever more powerful and intelligent. One trend is that wireless devices are becoming more inexpensive and more diverse. As a result, new technologies make it possible to equip wireless nodes with several radio transmitters/receivers. Each radio may support multiple channels which…

  4. Evaluation of Speech Intelligibility and Sound Localization Abilities with Hearing Aids Using Binaural Wireless Technology.

    Science.gov (United States)

    Ibrahim, Iman; Parsa, Vijay; Macpherson, Ewan; Cheesman, Margaret

    2013-01-02

    Wireless synchronization of the digital signal processing (DSP) features between two hearing aids in a bilateral hearing aid fitting is a fairly new technology. This technology is expected to preserve the differences in time and intensity between the two ears by co-ordinating the bilateral DSP features such as multichannel compression, noise reduction, and adaptive directionality. The purpose of this study was to evaluate the benefits of wireless communication as implemented in two commercially available hearing aids. More specifically, this study measured speech intelligibility and sound localization abilities of normal hearing and hearing impaired listeners using bilateral hearing aids with wireless synchronization of multichannel Wide Dynamic Range Compression (WDRC). Twenty subjects participated; 8 had normal hearing and 12 had bilaterally symmetrical sensorineural hearing loss. Each individual completed the Hearing in Noise Test (HINT) and a sound localization test with two types of stimuli. No specific benefit from wireless WDRC synchronization was observed for the HINT; however, hearing impaired listeners had better localization with the wireless synchronization. Binaural wireless technology in hearing aids may improve localization abilities although the possible effect appears to be small at the initial fitting. With adaptation, the hearing aids with synchronized signal processing may lead to an improvement in localization and speech intelligibility. Further research is required to demonstrate the effect of adaptation to the hearing aids with synchronized signal processing on different aspects of auditory performance.

  5. Evaluation of speech intelligibility and sound localization abilities with hearing aids using binaural wireless technology

    Directory of Open Access Journals (Sweden)

    Iman Ibrahim

    2012-12-01

    Full Text Available Wireless synchronization of the digital signal processing (DSP features between two hearing aids in a bilateral hearing aid fitting is a fairly new technology. This technology is expected to preserve the differences in time and intensity between the two ears by co-ordinating the bilateral DSP features such as multichannel compression, noise reduction, and adaptive directionality. The purpose of this study was to evaluate the benefits of wireless communication as implemented in two commercially available hearing aids. More specifically, this study measured speech intelligibility and sound localization abilities of normal hearing and hearing impaired listeners using bilateral hearing aids with wireless synchronization of multichannel Wide Dynamic Range Compression (WDRC. Twenty subjects participated; 8 had normal hearing and 12 had bilaterally symmetrical sensorineural hearing loss. Each individual completed the Hearing in Noise Test (HINT and a sound localization test with two types of stimuli. No specific benefit from wireless WDRC synchronization was observed for the HINT; however, hearing impaired listeners had better localization with the wireless synchronization. Binaural wireless technology in hearing aids may improve localization abilities although the possible effect appears to be small at the initial fitting. With adaptation, the hearing aids with synchronized signal processing may lead to an improvement in localization and speech intelligibility. Further research is required to demonstrate the effect of adaptation to the hearing aids with synchronized signal processing on different aspects of auditory performance.

  6. Evaluation of speech intelligibility and sound localization abilities with hearing aids using binaural wireless technology

    Directory of Open Access Journals (Sweden)

    Iman Ibrahim

    2013-01-01

    Full Text Available Wireless synchronization of the digital signal processing (DSP features between two hearing aids in a bilateral hearing aid fitting is a fairly new technology. This technology is expected to preserve the differences in time and intensity between the two ears by co-ordinating the bilateral DSP features such as multichannel compression, noise reduction, and adaptive directionality. The purpose of this study was to evaluate the benefits of wireless communication as implemented in two commercially available hearing aids. More specifically, this study measured speech intelligibility and sound localization abilities of normal hearing and hearing impaired listeners using bilateral hearing aids with wireless synchronization of multichannel Wide Dynamic Range Compression (WDRC. Twenty subjects participated; 8 had normal hearing and 12 had bilaterally symmetrical sensorineural hearing loss. Each individual completed the Hearing in Noise Test (HINT and a sound localization test with two types of stimuli. No specific benefit from wireless WDRC synchronization was observed for the HINT; however, hearing impaired listeners had better localization with the wireless synchronization. Binaural wireless technology in hearing aids may improve localization abilities although the possible effect appears to be small at the initial fitting. With adaptation, the hearing aids with synchronized signal processing may lead to an improvement in localization and speech intelligibility. Further research is required to demonstrate the effect of adaptation to the hearing aids with synchronized signal processing on different aspects of auditory performance.

  7. Magnetically coupled resonance wireless charging technology principles and transfer mechanisms

    Science.gov (United States)

    Zhou, Jiehua; Wan, Jian; Ma, Yinping

    2017-05-01

    With the tenure of Electric-Vehicle rising around the world, the charging methods have been paid more and more attention, the current charging mode mainly has the charging posts and battery swapping station. The construction of the charging pile or battery swapping station not only require lots of manpower, material costs but the bare conductor is also easy to generate electric spark hidden safety problems, still occupies large space. Compared with the wired charging, wireless charging mode is flexible, unlimited space and location factors and charging for vehicle safety and quickly. It complements the traditional charging methods in adaptability and the independent charge deficiencies. So the researching the wireless charging system have an important practical significance and application value. In this paper, wireless charging system designed is divided into three parts: the primary side, secondary side and resonant coupling. The main function of the primary side is to generate high-frequency alternating current, so selecting CLASS-E amplifier inverter structure through the research on full bridge, half-bridge and power amplification circuit. Addition, the wireless charging system is susceptible to outside interference, frequency drift phenomenon. Combined with the wireless energy transmission characteristics, resonant parts adopt resonant coupling energy transmission scheme and the Series-Series coupling compensation structure. For the electric vehicle charging power and voltage requirements, the main circuit is a full bridge inverter and Boost circuit used as the secondary side.

  8. Distributed Wireless Multi-Sensor Technologies, A Novel Approach to Reduce Motor Energy Usage

    Energy Technology Data Exchange (ETDEWEB)

    Daniel Sexton

    2008-03-28

    This report is the final report for the General Electric Distributed Wireless Multi-Sensor Technologies project. The report covers the research activities and benefits surrounding wireless technology used for industrial sensing applications. The main goal of this project was to develop wireless sensor technology that would be commercialized and adopted by industry for a various set of applications. Many of these applications will yield significant energy savings. One application where there was significant information to estimate a potential energy savings was focused on equipment condition monitoring and in particular electric motor monitoring. The results of the testing of the technology developed are described in this report along with the commercialization activities and various new applications and benefits realized.

  9. All-optical delay technique for supporting multiple antennas in a hybrid optical - wireless transmission system

    DEFF Research Database (Denmark)

    Prince, Kamau; Chiuchiarelli, A; Presi, M

    2008-01-01

    We introduce a novel continuously-variable optical delay technique to support beam-forming wireless communications systems using antenna arrays. We demonstrate delay with 64-QAM modulated signals at a rate of 15 Msymbol/sec with 2.5 GHz carrier frequency.......We introduce a novel continuously-variable optical delay technique to support beam-forming wireless communications systems using antenna arrays. We demonstrate delay with 64-QAM modulated signals at a rate of 15 Msymbol/sec with 2.5 GHz carrier frequency....

  10. Human++: Wireless autonomous sensor technology for body area networks

    NARCIS (Netherlands)

    Pop, V.; Francisco, R. de; Pflug, H.; Santana, J.; Visser, H.; Vullers, R.; Groot, H. de; Gyselinckx, B.

    2011-01-01

    Recent advances in ultra-low-power circuits and energy harvesters are making self-powered body wireless autonomous transducer solutions (WATS) a reality. Power optimization at the system and application level is crucial in achieving ultra-low-power consumption for the entire system. This paper deals

  11. Hybrid Optical Fibre-wireless Links at the 75-110 GHz Band Supporting 100 Gbps Transmission Capacities

    DEFF Research Database (Denmark)

    Zibar, Darko; Caballero Jambrina, Antonio; Yu, Xianbin

    2011-01-01

    We present a photonic generation and downconversion method for realizing a 40Gbps wireless link at the 75-110 GHz band exploiting the recent advances in photonic coherent detection technologies and digital signal processing. Furthermore, we analyze the capacities of hybrid optical fiber......-wireless links at the 75-110GHz band, and propose several approaches to overcome the challenges towards 100Gbps wireless capacity....

  12. Gigabit close-proximity wireless connections supported by 60 GHz RoF links with low carrier suppression

    DEFF Research Database (Denmark)

    Lebedev, Alexander; Pang, Xiaodan; Vegas Olmos, Juan José

    2013-01-01

    We present an experimental investigation of the 60 GHz optical carrier suppressed radio over fiber systems with less than 5 dB carrier suppression. As a case study, the 60 GHz RoF signal is generated using a 12.5 Gb/s commercially available Mach-Zehnder modulator biased at its minimum point. We r...... with simplified techniques of lightwave generation, baseband data modulation, and RF downconversion might be a promising enabling technology for fiber support of close-proximity wireless terminals....

  13. Adaptive Information Access on Multiple Applications Support Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Tobgay, Sonam; Olsen, Rasmus Løvenstein; Prasad, Ramjee

    2014-01-01

    is used for safety and security monitoring purposes. In this paper, we evaluate different access strategies to remote dynamic information and compare between achieving information reliability (mismatch probability) and the associated power consumption. Lastly, based on the models, we propose an adaptive......Accessing information remotely to dynamically changing information elements cannot be avoided and has become a required functionality for various network services. Most applications require up-to-date information which is reliable and accurate. The information reliability in terms of using correct...... information is challenged by dynamic nature of information elements. These challenges are more prominent in case of wireless sensor network (WSN) applications, as the information that the sensor node collects are mostly dynamic in nature (say, temperature). Therefore, it is likely that there can be a mismatch...

  14. Improving Mathematics Teaching and Learning Experiences for Hard of Hearing Students with Wireless Technology-Enhanced Classrooms

    Science.gov (United States)

    Liu, Chen-Chung; Chou, Chien-Chia; Liu, Baw-Jhiune; Yang, Jui-Wen

    2006-01-01

    Hard of hearing students usually face more difficulties at school than other students. A classroom environment with wireless technology was implemented to explore whether wireless technology could enhance mathematics learning and teaching activities for a hearing teacher and her 7 hard of hearing students in a Taiwan junior high school.…

  15. Study of Wireless Transmission Protocol Technology for Use in Flight Line Environment to Assist the Data Loading and Downloading on Aircraft

    National Research Council Canada - National Science Library

    Meng, Ow

    2004-01-01

    ... into the use of wireless tmnsmission technology to complement or replace the manual method of loading the critical data file from the command station onto every F-16 aircraft, The present wireless technology...

  16. Efficient cluster mobility support for tdma-based mac protocols in wireless sensor networks

    NARCIS (Netherlands)

    Nabi, M.; Geilen, M.; Basten, A.A.; Blagojevic, M.

    2014-01-01

    Node mobility is a key feature of using Wireless Sensor Networks (WSNs) in many sensory applications, such as healthcare. The Medium Access Control (MAC) protocol should properly support the mobility in the network. In particular, mobility is complicated for contention-free protocols like Time

  17. A review of wireless sensor technologies and applications in agriculture and food industry: state of the art and current trends.

    Science.gov (United States)

    Ruiz-Garcia, Luis; Lunadei, Loredana; Barreiro, Pilar; Robla, Jose Ignacio

    2009-01-01

    The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri-Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks) and RFID (Radio Frequency Identification), presenting the different systems available, recent developments and examples of applications, including ZigBee based WSN and passive, semi-passive and active RFID. Future trends of wireless communications in agriculture and food industry are also discussed.

  18. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    Science.gov (United States)

    Ruiz-Garcia, Luis; Lunadei, Loredana; Barreiro, Pilar; Robla, Jose Ignacio

    2009-01-01

    The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri-Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks) and RFID (Radio Frequency Identification), presenting the different systems available, recent developments and examples of applications, including ZigBee based WSN and passive, semi-passive and active RFID. Future trends of wireless communications in agriculture and food industry are also discussed. PMID:22408551

  19. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    Directory of Open Access Journals (Sweden)

    Ignacio Robla

    2009-06-01

    Full Text Available The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri-Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks and RFID (Radio Frequency Identification, presenting the different systems available, recent developments and examples of applications, including ZigBee based WSN and passive, semi-passive and active RFID. Future trends of wireless communications in agriculture and food industry are also discussed.

  20. On practical issues about interference in telecare applications based on different wireless technologies.

    Science.gov (United States)

    García, C Urdiales; Sigler, F Garcia; Duran, M Dominguez; Torre, J De La; Aristizabal, F Coslado; Parras, S Perez; Miralles, R Trapero; Sandoval, F

    2007-10-01

    Telemedicine systems have been progressively paying more and more attention to wireless technologies for personal area network (PAN). Depending on the features of the system to be developed, different technologies need to be deployed. These technologies are supposed to coexist, even though many of them operate in the same 2.4-GHz band. In case of interference, there are safety mechanisms included in the standard. However, these mechanisms do not work exactly as expected in theory. This paper presents an experiment with a real Bluetoothbased ECG system and Zigbee temperature sensors in an environment where a WiFi network is operating. The main novelty of the paper is the real implementation and experiments of all three wireless technologies for both continuous and discrete medical signals. Conclusions and recommendations for reliable operation are given for all three involved technologies.

  1. Impact of green technologies in optical networks case study: green wireless optical broadband access network

    Science.gov (United States)

    Puche, William S.; Sierra, Javier E.

    2014-09-01

    This article analyzes the current state of green technologies in optical telecommunications networks, analyzing in detail the basic structure of a hybrid network (Optical-Wireless), taking into account energy consumption by proposing a mathematical model is presented to establish the optimum number of ONUs in a network.

  2. Cognitive Wireless Communications - A paradigm shift in dealing with radio resources as a prerequisite for the wireless network of the future - An overview on the topic of cognitive wireless technologies

    Science.gov (United States)

    Haustein, Thomas; Stanczak, Slawomir; Wolisz, Adam; Jondral, Friedrich; Schotten, Hans; Kraemer, Rolf; Mück, Markus; Mennenga, Horst; Bender, Paul

    2016-07-01

    Wireless radio communications systems form the basis for mobile network connections in the digital society. A limited amount of radio spectrum and a spatially densified use of wireless communications systems require a resource-efficient use of the spectrum. Mechanisms of cognitive radio may hold the key to a more efficient use of the available spectrum under consideration of quality of service requirements. These mechanisms take advantage of location-specific knowledge of the wireless channel occupation in the dimensions of frequency, time, location and direction in space and therefore enable co-existent and reliable wireless communication. The authors give an introduction to the status of cognitive wireless communication technology, which represents the starting point of a series of research projects promoted by BMBF during 2012-2014.

  3. Wireless just-in-time training of mobile skilled support personnel

    Science.gov (United States)

    Bandera, Cesar; Marsico, Michael; Rosen, Mitchel; Schlegel, Barry

    2006-05-01

    Skilled Support Personnel (SSP) serve emergency response organizations during an emergency incident, and include laborers, operating engineers, carpenters, ironworkers, sanitation workers and utility workers. SSP called to an emergency incident rarely have recent detailed training on the chemical, biological, radiological, nuclear and/or explosives (CBRNE) agents or the personal protection equipment (PPE) relevant to the incident. This increases personal risk to the SSP and mission risk at the incident site. Training for SSP has been identified as a critical need by the National Institute for Environmental Health Sciences, Worker Education and Training Program. We present a system being developed to address this SSP training shortfall by exploiting a new training paradigm called just-in-time training (JITT) made possible by advances in distance learning and cellular telephony. In addition to the current conventional training at regularly scheduled instructional events, SSP called to an emergency incident will have secure access to short (cell phone technologies and wireless service providers, integration with the incident management system, and SCORM compliance.

  4. Eating of the pudding - Supporting the development life-cycle of wireless sensor networks for environmental monitoring scientists and ecologists

    NARCIS (Netherlands)

    Zhang, Kui

    2015-01-01

    In this thesis we present design and tooling solutions as well as network protocols to support application experts in the entire development life-cycle of wireless sensor networks. The complete life-cycle of wireless sensor networks starts with the user/application requirement analysis. It then goes

  5. An Overview of the Development of High Temperature Wireless Smart Sensor Technology

    Science.gov (United States)

    Hunter, Gary W.

    2014-01-01

    The harsh environment inherent in propulsion systems is especially challenging for Smart Sensor Systems; this paper addresses technology development for such applications. A basic sensing system for high temperature wireless pressure monitoring composed of a sensor, electronics, and wireless communication with scavenged power developed for health monitoring of aircraft engines and other high temperature applications has been demonstrated at 475 C. Other efforts will be discussed including a brief overview of the status of high temperature electronics and sensors, as well as their use and applications.

  6. Wireless and photonic high-speed communication technologies, circuits and design tools

    DEFF Research Database (Denmark)

    Krozer, Viktor; Johansen, Tom Keinicke; Jiang, Chenhui

    2009-01-01

    were reported. These communication systems present new challenges for circuit designers. The presentation will be devoted to technologies and various aspects of circuit design for 100 G applications. We will present overview on wired and wireless systems demonstrating the challenges of this research...... are fundamental to emerging consumer and professional applications. These systems start to emerge as near future applications and are subject of ongoing research activities in Europe, for example within the EU FP6 GIBON project. Wireless systems with over 100 GHz carriers as well as first over 100-G fibre systems...... including design challenges, relevant trade-offs and the present bottlenecks. Different system architectures will be presented with their impact on component requirements. Similarities and differences of wired and wireless applications will be pointed out. Design methodologies, necessary tools and circuit...

  7. M-RATS: Mobile-based Radio Access Technology Selector for Heterogeneous Wireless Environment

    Directory of Open Access Journals (Sweden)

    A. Tudzarov

    2011-06-01

    Full Text Available Wireless heterogeneous environments are a common reality today and will be so even more in the future. This paper is focused on providing a wireless access selection method for the future mobile terminals that will use naturally inspired algorithms for best network selection. The novel algorithm uses mobile terminal measurements from different radio access technologies within a given time window. The network selection is based on specified criteria, whose number can be increased as needed. Each criterion is modeled with a membership function associated with Fuzzy Logic controllers, which are optimized by using Particle Swarm Optimization. Each criterion is weighted, with the aim to assign the influence on the decision for a radio access network. Hence, our proposed algorithm implements past knowledge of the service performances of available wireless networks used by the mobile, to make a decision for network selection on given time intervals. The main contribution in the algorithm for wireless access network selection is in the usage of nature inspired algorithms, such as Particle Swarm Optimization – PSO, for optimization of Fuzzy Logic controllers, as well as usage of a Genetic Algorithm for optimization of decision making based on multi-criteria inputs. The simulation analysis has shown that the proposed algorithm gives a better probability of satisfied users compared to other existing wireless network selection algorithms.

  8. Developing a Mobile Application via Bluetooth Wireless Technology for Enhancing Communication

    OpenAIRE

    Sahar A. Idwan

    2009-01-01

    This paper presents Mobile application via Bluetooth wireless technology (MAvBT) that enhance the student portal in universities by connecting students' mobile phone devices to a server application that benefit from the devices Bluetooth technology and the storage abilities. MAvBT enables students to retrieve their information with minimum time and anywhere ranging from 100m up to 1Km and it facilitate the communication with instructors outside the office hours. This system consists of comput...

  9. Examination of wireless technology to improve nurse communication, response time to bed alarms, and patient safety.

    Science.gov (United States)

    Guarascio-Howard, Linda

    2011-01-01

    A medical-surgical unit in a southwestern United States hospital examined the results of adding wireless communication technology to assist nurses in identifying patient bed status changes and enhancing team communication. Following the addition of wireless communication, response time to patient calls and the number of nurse-initiated communications were compared to pre-wireless calls and response time sampling period. In the baseline study, nurse-initiated communications and response time to patient calls were investigated for a team nursing model (Guarascio-Howard & Malloch, 2007). At this time, technology consisted of a nurse call system and telephones located at each decentralized nurse station and health unit coordinator (HUC) station. For this follow-up study, a wireless device was given to nurses and their team members following training on device use and privacy issues. Four registered nurses (RNs) were shadowed for 8 hours (32 hours total) before and after the introduction of the wireless devices. Data were collected regarding patient room visits, number of patient calls, bed status calls, response time to calls, and the initiator of the communication episodes. Follow-up study response time to calls significantly decreased (t-test p = .03). RNs and licensed practical nurses responded to bed status calls in less than 1 minute-62% of the 37 calls. Communication results indicated a significant shift (One Proportion Z Test) in RN-initiated communications, suggesting an enhanced ability to communicate with team members and to assist in monitoring patient status. Patient falls trended downward, although not significantly (p > .05), for a 6-month period of wireless technology use compared to the same period the previous year. The addition of a wireless device has advantages in team nursing, namely increasing communication with staff members and decreasing response time to patient and bed status calls. Limitations of the study included a change in caregiver team

  10. Analytical support for coal technologies

    Directory of Open Access Journals (Sweden)

    Valášek Václav

    1998-09-01

    Full Text Available On the basis of success in the selection negotiation The Brown Coal Research Institute j.s.c. Most was authorized to process the project Phare D5/93 with the title "Analytical support to clean coal technologies". The elaboration of the task run in 1997 in a close cooperation with the Mining University - TU Ostrava; DBI - AUA GmbH, Freiberg, Germany; DMT mbH, Essen, Germany and Cerchar, Mazingarbe, France. In the work the available reserves of brown and hard coal and from them following possible levels of annual minings in relation to prognosed needs of the electro-energetics and heating-industry were evaluated. The knowledge about the contents of selected trace elements (As, Be, Cd, Cl, Co, Cr, Cu, F, Hg, Mn, Ni, Pb, Sb, Se, Te, Tl, V, Zn in Czech (CZ coal were also evaluated it was investigated. Further, the distribution of trace elements during the burning process in four types of boilers in CZ. was investigated. The CZ and EU legislation related to trace elements in coal and combustion products was finally comparred. It was stated that the CZ legal standards are not at variant with EU the standards.

  11. Wireless virtualization

    CERN Document Server

    Wen, Heming; Le-Ngoc, Tho

    2013-01-01

    This SpringerBriefs is an overview of the emerging field of wireless access and mobile network virtualization. It provides a clear and relevant picture of the current virtualization trends in wireless technologies by summarizing and comparing different architectures, techniques and technologies applicable to a future virtualized wireless network infrastructure. The readers are exposed to a short walkthrough of the future Internet initiative and network virtualization technologies in order to understand the potential role of wireless virtualization in the broader context of next-generation ubiq

  12. Making Wireless Networks Secure for NASA Mission Critical Applications Using Virtual Private Network (VPN) Technology

    Science.gov (United States)

    Nichols, Kelvin F.; Best, Susan; Schneider, Larry

    2004-01-01

    With so many security issues involved with wireless networks, the technology has not been fully utilized in the area of mission critical applications. These applications would include the areas of telemetry, commanding, voice and video. Wireless networking would allow payload operators the mobility to take computers outside of the control room to their off ices and anywhere else in the facility that the wireless network was extended. But the risk is too great of having someone sit just inside of your wireless network coverage and intercept enough of your network traffic to steal proprietary data from a payload experiment or worse yet hack back into your system and do even greater harm by issuing harmful commands. Wired Equivalent Privacy (WEP) is improving but has a ways to go before it can be trusted to protect mission critical data. Today s hackers are becoming more aggressive and innovative, and in order to take advantage of the benefits that wireless networking offer, appropriate security measures need to be in place that will thwart hackers. The Virtual Private Network (VPN) offers a solution to the security problems that have kept wireless networks from being used for mission critical applications. VPN provides a level of encryption that will ensure that data is protected while it is being transmitted over a wireless local area network (LAN). The VPN allows a user to authenticate to the site that the user needs to access. Once this authentication has taken place the network traffic between that site and the user is encapsulated in VPN packets with the Triple Data Encryption Standard (3DES). 3DES is an encryption standard that uses a single secret key to encrypt and decrypt data. The length of the encryption key is 168 bits as opposed to its predecessor DES that has a 56-bit encryption key. Even though 3DES is the common encryption standard for today, the Advance Encryption Standard (AES), which provides even better encryption at a lower cycle cost is growing

  13. Discursive Deployments: Mobilizing Support for Municipal and Community Wireless Networks in the U.S.

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, Rosio; Rodriguez, Juana Maria

    2008-08-16

    This paper examines Municipal Wireless (MW) deployments in the United States. In particular, the interest is in understanding how discourse has worked to mobilize widespread support for MW networks. We explore how local governments discursively deploy the language of social movements to create a shared understanding of the networking needs of communities. Through the process of"framing" local governments assign meaning to the MW networks in ways intended to mobilize support anddemobilize opposition. The mobilizing potential of a frame varies and is dependent on its centrality and cultural resonance. We examine the framing efforts of MW networks by using a sample of Request for Proposals for community wireless networks, semi-structured interviews and local media sources. Prominent values that are central to a majority of the projects and others that are culturally specific are identified and analyzed for their mobilizing potency.

  14. Heterogeneous Wireless Mesh Network Technology Evaluation for Space Proximity and Surface Applications

    Science.gov (United States)

    DeCristofaro, Michael A.; Lansdowne, Chatwin A.; Schlesinger, Adam M.

    2014-01-01

    NASA has identified standardized wireless mesh networking as a key technology for future human and robotic space exploration. Wireless mesh networks enable rapid deployment, provide coverage in undeveloped regions. Mesh networks are also self-healing, resilient, and extensible, qualities not found in traditional infrastructure-based networks. Mesh networks can offer lower size, weight, and power (SWaP) than overlapped infrastructure-perapplication. To better understand the maturity, characteristics and capability of the technology, we developed an 802.11 mesh network consisting of a combination of heterogeneous commercial off-the-shelf devices and opensource firmware and software packages. Various streaming applications were operated over the mesh network, including voice and video, and performance measurements were made under different operating scenarios. During the testing several issues with the currently implemented mesh network technology were identified and outlined for future work.

  15. Resilient Disaster Network Based on Software Defined Cognitive Wireless Network Technology

    Directory of Open Access Journals (Sweden)

    Goshi Sato

    2015-01-01

    Full Text Available In order to temporally recover the information network infrastructure in disaster areas from the Great East Japan Earthquake in 2011, various wireless network technologies such as satellite IP network, 3G, and Wi-Fi were effectively used. However, since those wireless networks are individually introduced and installed but not totally integrated, some of networks were congested due to the sudden network traffic generation and unbalanced traffic distribution, and eventually the total network could not effectively function. In this paper, we propose a disaster resilient network which integrates various wireless networks into a cognitive wireless network that users can use as an access network to the Internet at the serious disaster occurrence. We designed and developed the disaster resilient network based on software defined network (SDN technology to automatically select the best network link and route among the possible access networks to the Internet by periodically monitoring their network states and evaluate those using extended AHP method. In order to verify the usefulness of our proposed system, a prototype system is constructed and its performance is evaluated.

  16. Adaption of Cognitive Radio technology to low-cost and low-power wireless Personal Area Network devices

    DEFF Research Database (Denmark)

    Rohde, John; Toftegaard, Thomas Skjødeberg

    2011-01-01

    The application of wireless personal area network (WPAN) and simple point-to-point wireless communication devices has increased drastically both in private household and in our workspaces in general over the last decade. Combined with the fact that the total number of wireless devices...... and associated standards present in the wireless environment is experiencing an extreme growth, the frequency spectrum scarcity is exposed as a severe challenge. Setting up efficient and reliable wireless WPAN links can be challenging even today. This is especially true because of the intensive use...... discusses the challenges associated with the implementation of highly reliable low-power WPAN networks for the future and the adaption of Cognitive Radio technology as a potential solution. A brief status on the maturity of CR technology will be presented as an integral part of this discussion....

  17. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; hide

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  18. Adaptive Information Access in Multiple Applications Support Wireless Sensor Network

    DEFF Research Database (Denmark)

    Tobgay, Sonam; Olsen, Rasmus Løvenstein; Prasad, Ramjee

    2012-01-01

    set of requirements. Lastly, the paper suggests a mechanism by which the information access or acquisition can be adapted as per the requirements of the application. The main parameters focused in this paper are mismatch probability [1] and power dissipation with respect to sampling rate....... specific WSN considering its resource constraints, neglecting the return-of-investment and usefulness of the system. In this paper, we bring out the WSN scenario which supports multiple applications and study the challenges that would pose in implementation as each specific application has its own specific...

  19. Realization of Timed Reliable Communication over Off-The-Shelf Wireless Technologies

    DEFF Research Database (Denmark)

    Malinowsky, B.; Groenbaek, Jesper; Schwefel, Hans-Peter

    2013-01-01

    Industrial and safety-critical applications pose strict requirements for timeliness and reliability for the communication solution. Thereby the use of off-the-shelf (OTS) wireless communication technologies can be attractive to achieve low cost and easy deployment. This paper presents and analyses...... a protocol and its analytical model, enabling to configure for explicit timeliness and message reliability requirements under different link technologies and conditions. We assess the timing behavior and reliability properties studying a scenario of distributing safety-critical alerts. Our evaluation covers...... and link measurements to contribute to a (self-)configurable timed reliable protocol deployed on multiple technologies....

  20. An Overview of Multigigabit Wireless through Millimeter Wave Technology: Potentials and Technical Challenges

    Directory of Open Access Journals (Sweden)

    Chong Chia-Chin

    2007-01-01

    Full Text Available This paper presents an overview of 60 GHz technology and its potentials to provide next generation multigigabit wireless communications systems. We begin by reviewing the state-of-art of the 60 GHz radio. Then, the current status of worldwide regulatory efforts and standardization activities for 60 GHz band is summarized. As a result of the worldwide unlicensed 60 GHz band allocation, a number of key applications can be identified using millimeter-wave technology. Despite of its huge potentials to achieve multigigabit wireless communications, 60 GHz radio presents a series of technical challenges that needs to be resolved before its full deployment. Specifically, we will focus on the link budget analysis from the 60 GHz radio propagation standpoint and highlight the roles of antennas in establishing a reliable 60 GHz radio.

  1. An Overview of Multigigabit Wireless through Millimeter Wave Technology: Potentials and Technical Challenges

    Directory of Open Access Journals (Sweden)

    Chia-Chin Chong

    2006-12-01

    Full Text Available This paper presents an overview of 60 GHz technology and its potentials to provide next generation multigigabit wireless communications systems. We begin by reviewing the state-of-art of the 60 GHz radio. Then, the current status of worldwide regulatory efforts and standardization activities for 60 GHz band is summarized. As a result of the worldwide unlicensed 60 GHz band allocation, a number of key applications can be identified using millimeter-wave technology. Despite of its huge potentials to achieve multigigabit wireless communications, 60 GHz radio presents a series of technical challenges that needs to be resolved before its full deployment. Specifically, we will focus on the link budget analysis from the 60 GHz radio propagation standpoint and highlight the roles of antennas in establishing a reliable 60 GHz radio.

  2. Planning of Vehicle Routing with Backup Provisioning Using Wireless Sensor Technologies

    Directory of Open Access Journals (Sweden)

    Noélia Correia

    2017-08-01

    Full Text Available Wireless sensor technologies can be used by intelligent transportation systems to provide innovative services that lead to improvements in road safety and congestion, increasing end-user satisfaction. In this article, we address vehicle routing with backup provisioning, where the possibility of reacting to overloading/overcrowding of vehicles at certain stops is considered. This is based on the availability of vehicle load information, which can be captured using wireless sensor technologies. After discussing the infrastructure and monitoring tool, the problem is mathematically formalized, and a heuristic algorithm using local search procedures is proposed. Results show that planning routes with backup provisioning can allow fast response to overcrowding while reducing costs. Therefore, sustainable urban mobility, with efficient use of resources, can be provided while increasing the quality of service perceived by users.

  3. Electromagnetic Fields, Pulsed Radiofrequency Radiation, and Epigenetics: How Wireless Technologies May Affect Childhood Development.

    Science.gov (United States)

    Sage, Cindy; Burgio, Ernesto

    2018-01-01

    Mobile phones and other wireless devices that produce electromagnetic fields (EMF) and pulsed radiofrequency radiation (RFR) are widely documented to cause potentially harmful health impacts that can be detrimental to young people. New epigenetic studies are profiled in this review to account for some neurodevelopmental and neurobehavioral changes due to exposure to wireless technologies. Symptoms of retarded memory, learning, cognition, attention, and behavioral problems have been reported in numerous studies and are similarly manifested in autism and attention deficit hyperactivity disorders, as a result of EMF and RFR exposures where both epigenetic drivers and genetic (DNA) damage are likely contributors. Technology benefits can be realized by adopting wired devices for education to avoid health risk and promote academic achievement. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

  4. An Easy to Deploy Street Light Control System Based on Wireless Communication and LED Technology

    OpenAIRE

    Jesús Villadangos; Francisco Falcone; José Javier Astrain; Leire Azpilicueta; Asier Moreno; Ignacio Julio García Zuazola; Aitor Chertudi; Asier Perallos; Ignacio Angulo; Pilar Elejoste

    2013-01-01

    This paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aw...

  5. Research on wireless communication technology based on automatic logistics system of welder

    Directory of Open Access Journals (Sweden)

    Sun Xuan

    2018-01-01

    Full Text Available In order to meet the requirements of high real-time and high stability of data transmission in automatic welding system, RTU data format and real-time communication mechanism are adopted in this system. In the automatic logistics system through the Ethernet and wireless WIFI technology will palletizer, stacker, AGV car organically together to complete the palletizer automatic crawling the goods, AGV car automatic delivery, stacking machine automatically out of the Dimensional warehouse. .

  6. SECURITY ANALYSIS OF WIRELESS NETWORKS USING WEP-TECHNOLOGIES

    OpenAIRE

    Юдін, О.; Національний авіаційний університет; Весельська, О.; Національний авіаційний університет

    2013-01-01

    In the article the quality of information security in wireless networks by using WEP-encryption scheme and RC4 symmetrical streaming algorithm was studied. The tips and ways to improve the security of information are given. В статье исследована эффективность защиты информационных ресурсов в беспроводных сетях на основе использования WEP-протокола и симметричного алгоритма шифрования RC4. Рассмотрены пути и дальнейшие возможности повышения эффективности методов защиты информации. У стат...

  7. UST-ID robotics: Wireless communication and minimum conductor technology, and end-point tracking technology surveys

    Energy Technology Data Exchange (ETDEWEB)

    Holliday, M.A.

    1993-10-01

    This report is a technology review of the current state-of-the-art in two technologies applicable to the Underground Storage Tank (UST) program at the Hanford Nuclear Reservation. The first review is of wireless and minimal conductor technologies for in-tank communications. The second review is of advanced concepts for independent tool-point tracking. This study addresses the need to provide wireless transmission media or minimum conductor technology for in-tank communications and robot control. At present, signals are conducted via contacting transmission media, i.e., cables. Replacing wires with radio frequencies or invisible light are commonplace in the communication industry. This technology will be evaluated for its applicability to the needs of robotics. Some of these options are radio signals, leaky coax, infrared, microwave, and optical fiber systems. Although optical fiber systems are contacting transmission media, they will be considered because of their ability to reduce the number of conductors. In this report we will identify, evaluate, and recommend the requirements for wireless and minimum conductor technology to replace the present cable system. The second section is a technology survey of concepts for independent end-point tracking (tracking the position of robot end effectors). The position of the end effector in current industrial robots is determined by computing that position from joint information, which is basically a problem of locating a point in three-dimensional space. Several approaches are presently being used in industrial robotics, including: stereo-triangulation with a theodolite network and electrocamera system, photogrammetry, and multiple-length measurement with laser interferometry and wires. The techniques that will be evaluated in this survey are advanced applications of the aforementioned approaches. These include laser tracking (3-D and 5-D), ultrasonic tracking, vision-guided servoing, and adaptive robotic visual tracking.

  8. Wireless Networks

    OpenAIRE

    Samaka, Mohammed; Khan, Khaled M.D.

    2007-01-01

    Wireless communication is the fastest-growing field in the telecommunication industry. Wireless networks have grown significantly as an important segment of the communications industry. They have become popular networks with the potential to provide high-speed, high-quality information exchange between two or more portable devices without any wire or conductors. Wireless networks can simply be characterized as the technology that provides seamless access to information, anywhere, anyplace, an...

  9. Design and implementation of wireless dose logger network for radiological emergency decision support system

    Energy Technology Data Exchange (ETDEWEB)

    Gopalakrishnan, V.; Baskaran, R.; Venkatraman, B. [Radiation Impact Assessment Section, Radiological Safety Division, Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam 603102 (India)

    2016-08-15

    A decision support system (DSS) is implemented in Radiological Safety Division, Indira Gandhi Centre for Atomic Research for providing guidance for emergency decision making in case of an inadvertent nuclear accident. Real time gamma dose rate measurement around the stack is used for estimating the radioactive release rate (source term) by using inverse calculation. Wireless gamma dose logging network is designed, implemented, and installed around the Madras Atomic Power Station reactor stack to continuously acquire the environmental gamma dose rate and the details are presented in the paper. The network uses XBee–Pro wireless modules and PSoC controller for wireless interfacing, and the data are logged at the base station. A LabView based program is developed to receive the data, display it on the Google Map, plot the data over the time scale, and register the data in a file to share with DSS software. The DSS at the base station evaluates the real time source term to assess radiation impact.

  10. A Review of Assistive Listening Device and Digital Wireless Technology for Hearing Instruments

    Science.gov (United States)

    Kim, Chun Hyeok

    2014-01-01

    Assistive listening devices (ALDs) refer to various types of amplification equipment designed to improve the communication of individuals with hard of hearing to enhance the accessibility to speech signal when individual hearing instruments are not sufficient. There are many types of ALDs to overcome a triangle of speech to noise ratio (SNR) problems, noise, distance, and reverberation. ALDs vary in their internal electronic mechanisms ranging from simple hard-wire microphone-amplifier units to more sophisticated broadcasting systems. They usually use microphones to capture an audio source and broadcast it wirelessly over a frequency modulation (FM), infra-red, induction loop, or other transmission techniques. The seven types of ALDs are introduced including hardwire devices, FM sound system, infra-red sound system, induction loop system, telephone listening devices, television, and alert/alarm system. Further development of digital wireless technology in hearing instruments will make possible direct communication with ALDs without any accessories in the near future. There are two technology solutions for digital wireless hearing instruments improving SNR and convenience. One is near-field magnetic induction combined with Bluetooth radio frequency (RF) transmission or proprietary RF transmission and the other is proprietary RF transmission alone. Recently launched digital wireless hearing aid applying this new technology can communicate from the hearing instrument to personal computer, phones, Wi-Fi, alert systems, and ALDs via iPhone, iPad, and iPod. However, it comes with its own iOS application offering a range of features but there is no option for Android users as of this moment. PMID:25566400

  11. A review of assistive listening device and digital wireless technology for hearing instruments.

    Science.gov (United States)

    Kim, Jin Sook; Kim, Chun Hyeok

    2014-12-01

    Assistive listening devices (ALDs) refer to various types of amplification equipment designed to improve the communication of individuals with hard of hearing to enhance the accessibility to speech signal when individual hearing instruments are not sufficient. There are many types of ALDs to overcome a triangle of speech to noise ratio (SNR) problems, noise, distance, and reverberation. ALDs vary in their internal electronic mechanisms ranging from simple hard-wire microphone-amplifier units to more sophisticated broadcasting systems. They usually use microphones to capture an audio source and broadcast it wirelessly over a frequency modulation (FM), infra-red, induction loop, or other transmission techniques. The seven types of ALDs are introduced including hardwire devices, FM sound system, infra-red sound system, induction loop system, telephone listening devices, television, and alert/alarm system. Further development of digital wireless technology in hearing instruments will make possible direct communication with ALDs without any accessories in the near future. There are two technology solutions for digital wireless hearing instruments improving SNR and convenience. One is near-field magnetic induction combined with Bluetooth radio frequency (RF) transmission or proprietary RF transmission and the other is proprietary RF transmission alone. Recently launched digital wireless hearing aid applying this new technology can communicate from the hearing instrument to personal computer, phones, Wi-Fi, alert systems, and ALDs via iPhone, iPad, and iPod. However, it comes with its own iOS application offering a range of features but there is no option for Android users as of this moment.

  12. iHealth: supporting health by technology

    NARCIS (Netherlands)

    Ossebaard, Hans Cornelis

    2012-01-01

    This thesis is about how people support their health through the use of technology. It focuses on web-based information and communication technology (ICT). Many factors play a role in the interaction between people, technology and context. In five studies we have investigated a few of them. The

  13. Millimeter-Wave Wireless Power Transfer Technology for Space Applications

    Science.gov (United States)

    Chattopadhyay, Goutam; Manohara, Harish; Mojarradi, Mohammad M.; Vo, Tuan A.; Mojarradi, Hadi; Bae, Sam Y.; Marzwell, Neville

    2008-01-01

    In this paper we present a new compact, scalable, and low cost technology for efficient receiving of power using RF waves at 94 GHz. This technology employs a highly innovative array of slot antennas that is integrated on substrate composed of gold (Au), silicon (Si), and silicon dioxide (SiO2) layers. The length of the slots and spacing between them are optimized for a highly efficient beam through a 3-D electromagnetic simulation process. Antenna simulation results shows a good beam profile with very low side lobe levels and better than 93% antenna efficiency.

  14. The Most Possible Scheme of Joint Service Detection for the Next Wireless Communication Technologies

    Directory of Open Access Journals (Sweden)

    Firdaus Firdaus

    2013-03-01

    Full Text Available The era of beyond third generation wireless communication is highly heterogeneous in that it comprises several radio access technologies that need to be joined into a single multimode terminal. In this respect, this paper introduces a common service recognition system for the next wireless communication technologies i.e. Long Term Evolution (LTE, WiMAX or IEEE 802.16, and Wireless Local Area Network (WLAN or IEEE 802.11. It is done in physical layer as one of multimode terminal ability regardless network cooperation existence. We investigated on the preamble and synchronization signals as indicators of the available services instead of carrier frequency detection. To detect these signals, we proposed a time domain detection system consisting of auto-correlation, cross-correlation, and a peak period detection. Based on complexity analysis, this paper proposes the most possible scheme with lower complexity than cross-correlation implementation. Moreover, the fixed point simulation results show that the proposed system satisfies the minimum receiver sensitivity requirements that specified in the standards.

  15. A low-frequency versatile wireless power transfer technology for biomedical implants.

    Science.gov (United States)

    Jiang, Hao; Zhang, Junmin; Lan, Di; Chao; Liou, Shyshenq; Shahnasser, Hamid; Fechter, Richard; Hirose, Shinjiro; Harrison, Michael; Roy, Shuvo

    2013-08-01

    Implantable biomedical sensors and actuators are highly desired in modern medicine. In many cases, the implant's electrical power source profoundly determines its overall size and performance . The inductively coupled coil pair operating at the radio-frequency (RF) has been the primary method for wirelessly delivering electrical power to implants for the last three decades . Recent designs significantly improve the power delivery efficiency by optimizing the operating frequency, coil size and coil distance . However, RF radiation hazard and tissue absorption are the concerns in the RF wireless power transfer technology (RF-WPTT) , . Also, it requires an accurate impedance matching network that is sensitive to operating environments between the receiving coil and the load for efficient power delivery . In this paper, a novel low-frequency wireless power transfer technology (LF-WPTT) using rotating rare-earth permanent magnets is demonstrated. The LF-WPTT is able to deliver 2.967 W power at  ∼ 180 Hz to an 117.1 Ω resistor over 1 cm distance with 50% overall efficiency. Because of the low operating frequency, RF radiation hazard and tissue absorption are largely avoided, and the power delivery efficiency from the receiving coil to the load is independent of the operating environment. Also, there is little power loss observed in the LF-WPTT when the receiving coil is enclosed by non-magnetic implant-grade stainless steel.

  16. [Mobile phone-computer wireless interactive graphics transmission technology and its medical application].

    Science.gov (United States)

    Huang, Shuo; Liu, Jing

    2010-05-01

    Application of clinical digital medical imaging has raised many tough issues to tackle, such as data storage, management, and information sharing. Here we investigated a mobile phone based medical image management system which is capable of achieving personal medical imaging information storage, management and comprehensive health information analysis. The technologies related to the management system spanning the wireless transmission technology, the technical capabilities of phone in mobile health care and management of mobile medical database were discussed. Taking medical infrared images transmission between phone and computer as an example, the working principle of the present system was demonstrated.

  17. EMG/ECG Acquisition System with Online Adjustable Parameters Using ZigBee Wireless Technology

    Science.gov (United States)

    Kobayashi, Hiroyuki

    This paper deals with a novel wireless bio-signal acquisition system employing ZigBee wireless technology, which consists of mainly two components, that is, intelligent electrode and data acquisition host. The former is the main topic of this paper. It is put on a subject's body to amplify bio-signal such as EMG or ECG and stream its data at upto 2 ksps. One of the most remarkable feature of the intelligent electrode is that it can change its own parameters including both digital and analog ones on-line. The author describes its design first, then introduces a small, light and low cost implementation of the intelligent electrode named as “VAMPIRE-BAT.” And he show some experimental results to confirm its usability and to estimate its practical performances.

  18. Wireless control of smartphones with tongue motion using tongue drive assistive technology.

    Science.gov (United States)

    Kim, Jeonghee; Huo, Xueliang; Ghovanloo, Maysam

    2010-01-01

    Tongue Drive System (TDS) is a noninvasive, wireless and wearable assistive technology that helps people with severe disabilities control their environments using their tongue motion. TDS translates specific tongue gestures to commands by detecting a small permanent magnetic tracer on the users' tongue. We have linked the TDS to a smartphone (iPhone/iPod Touch) with a customized wireless module, added to the iPhone. We also migrated and ran the TDS sensor signal processing algorithm and graphical user interface on the iPhone in real time. The TDS-iPhone interface was evaluated by four able- bodied subjects for dialing 10-digit phone numbers using the standard telephone keypad and three methods of prompting the numbers: visual, auditory, and cognitive. Preliminary results showed that the interface worked quite reliably at a rate of 15.4 digits per minute, on average, with negligible errors.

  19. Wireless Control of Smartphones with Tongue Motion Using Tongue Drive Assistive Technology

    Science.gov (United States)

    Kim, Jeonghee; Huo, Xueliang

    2010-01-01

    Tongue Drive System (TDS) is a noninvasive, wireless and wearable assistive technology that helps people with severe disabilities control their environments using their tongue motion. TDS translates specific tongue gestures to commands by detecting a small permanent magnetic tracer on the users’ tongue. We have linked the TDS to a smartphone (iPhone/iPod Touch) with a customized wireless module, added to the iPhone. We also migrated and ran the TDS sensor signal processing algorithm and graphical user interface on the iPhone in real time. The TDS-iPhone interface was evaluated by four able-bodied subjects for dialing 10-digit phone numbers using the standard telephone keypad and three methods of prompting the numbers: visual, auditory, and cognitive. Preliminary results showed that the interface worked quite reliably at a rate of 15.4 digits per minute, on average, with negligible errors. PMID:21096049

  20. Citizen Management of Technology: A Science and Technology Studies approach to wireless networks and urban governance trough guifi.net

    Directory of Open Access Journals (Sweden)

    Yann Bona Beauvois

    2011-03-01

    Full Text Available Thesis presented at the Departament de Psicologia Social de la UAB by Yann Bona on December, 2010. Directed by Dr. Joan Pujol Tarrés.This dissertation explores the many ways in which citizens aiming to manage technologies in urban scape relate to public administrations. To accomplish it's task, it brings forward certain STS notions such as cosmopolitics, hybrid composition or technical democracy. On a general level, this thesis seeks an answer to Bruno Latour concern with what does it mean to conceive the technical as political?. We offer a set of conclusions based on what we choose to name a Sociotechnique of Public Policy .Our work relies on a case study focused on a free and open wireless network (located in Catalunya for the most part and called guifi.net that emerged from the desire and will of Civil Society wich, up to date, turns out to be the world's biggest free wireless network.

  1. Implementation of Asset Management System Based on Wireless Sensor Technology

    Directory of Open Access Journals (Sweden)

    Nan WANG

    2014-02-01

    Full Text Available RFID technology is regarded as one of the top ten key technologies in the 21st century, which has extensive application prospect in various fields, including asset management, public safety and so on. Through analyzing the current problems existing in asset management, this paper proposes to apply RFID technology in device management to effectively improve the level of automation and informatization of device management, and designs the scheme of equipment monitoring system based on 433 MHz RFID electronic tag and reader. The hardware part of monitoring system consists of the RFID sensor terminals attached in the device and the readers distributed in each monitoring site. The reader uploads the information collected by tag to the backend server and the management system, so as to allow managers and decision makers to understand the usage rate and location of the experimental instruments and to provide managers with a scientific basis for decision making, which effectively solves the relatively backward status quo of current device management level.

  2. Space Solar Power Technology Demonstration for Lunar Polar Applications: Laser-Photovoltaic Wireless Power Transmission

    Science.gov (United States)

    Henley, M. W.; Fikes, J. C.; Howell, J.; Mankins, J. C.; Howell, Joe T. (Technical Monitor)

    2002-01-01

    Space Solar Power technology offers unique benefits for near-term NASA space science missions, which can mature this technology for other future applications. "Laser-Photo-Voltaic Wireless Power Transmission" (Laser-PV WPT) is a technology that uses a laser to beam power to a photovoltaic receiver, which converts the laser's light into electricity. Future Laser-PV WPT systems may beam power from Earth to satellites or large Space Solar Power satellites may beam power to Earth, perhaps supplementing terrestrial solar photo-voltaic receivers. In a near-term scientific mission to the moon, Laser-PV WPT can enable robotic operations in permanently shadowed lunar polar craters, which may contain ice. Ground-based technology demonstrations are proceeding, to mature the technology for this initial application, in the moon's polar regions.

  3. Improving Spectral Capacity and Wireless Network Coverage by Cognitive Radio Technology and Relay Nodes in Cellular Systems

    DEFF Research Database (Denmark)

    Frederiksen, Flemming Bjerge

    2008-01-01

    Methods to enhance the use of the frequency spectrum by automatical spectrum sensing plus spectrum sharing in a cognitive radio technology context have been presented and discussed in this paper. Ideas to improve the wireless transmission by orthogonal OFDM-based communication and to increase the...... the coverage of cellular systems by future wireless networks, relay channels, relay stations and collaborate radio have been presented as well. A revised hierarchical deployment of the future wireless and wired networks are shortly discussed.......Methods to enhance the use of the frequency spectrum by automatical spectrum sensing plus spectrum sharing in a cognitive radio technology context have been presented and discussed in this paper. Ideas to improve the wireless transmission by orthogonal OFDM-based communication and to increase...

  4. A dedicated fund supports technological innovation

    CERN Multimedia

    Katarina Anthony

    2010-01-01

    The Knowledge and Technology Transfer (KTT) Group is calling on CERN Departments to take their technology out of the confines of the laboratory and make it ready for dissemination. For the first time, projects can apply for financial support from the newly established KTT Fund.   Scientific inquiry can lead to unexpected developments for society when researchers apply their expertise for public use. CERN actively encourages this transfer of knowledge and technology and, for the first time, has created a dedicated fund to provide financial support to projects aiming at disseminating their technologies to external audiences. CERN’s technology transfer schemes were formalised in the recent Policy on the Management of Intellectual Property in Technology Transfer, approved in March. Revenues generated by commercial exploitation will be distributed between the members of the team that developed the technology, their Department, and the KTT Fund for reinvestment in further KTT projects. &qu...

  5. Adaptive Wireless Transceiver Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Many wireless technologies are already available for sensor applications. It is inevitable that many non-interoperable wireless technologies between 400 MHz and 5.8...

  6. 78 FR 64200 - Innovative Spectrum Sharing Technology Day Event

    Science.gov (United States)

    2013-10-28

    ... wireless technologies and applications. President Obama, supported by the President's Council of Advisors... initiatives aimed at satisfying the nation's surging demand for wireless services, devices and applications... National Telecommunications and Information Administration Innovative Spectrum Sharing Technology Day Event...

  7. Distributed network, wireless and cloud computing enabled 3-D ultrasound; a new medical technology paradigm.

    Directory of Open Access Journals (Sweden)

    Arie Meir

    Full Text Available Medical technologies are indispensable to modern medicine. However, they have become exceedingly expensive and complex and are not available to the economically disadvantaged majority of the world population in underdeveloped as well as developed parts of the world. For example, according to the World Health Organization about two thirds of the world population does not have access to medical imaging. In this paper we introduce a new medical technology paradigm centered on wireless technology and cloud computing that was designed to overcome the problems of increasing health technology costs. We demonstrate the value of the concept with an example; the design of a wireless, distributed network and central (cloud computing enabled three-dimensional (3-D ultrasound system. Specifically, we demonstrate the feasibility of producing a 3-D high end ultrasound scan at a central computing facility using the raw data acquired at the remote patient site with an inexpensive low end ultrasound transducer designed for 2-D, through a mobile device and wireless connection link between them. Producing high-end 3D ultrasound images with simple low-end transducers reduces the cost of imaging by orders of magnitude. It also removes the requirement of having a highly trained imaging expert at the patient site, since the need for hand-eye coordination and the ability to reconstruct a 3-D mental image from 2-D scans, which is a necessity for high quality ultrasound imaging, is eliminated. This could enable relatively untrained medical workers in developing nations to administer imaging and a more accurate diagnosis, effectively saving the lives of people.

  8. Distributed network, wireless and cloud computing enabled 3-D ultrasound; a new medical technology paradigm.

    Science.gov (United States)

    Meir, Arie; Rubinsky, Boris

    2009-11-19

    Medical technologies are indispensable to modern medicine. However, they have become exceedingly expensive and complex and are not available to the economically disadvantaged majority of the world population in underdeveloped as well as developed parts of the world. For example, according to the World Health Organization about two thirds of the world population does not have access to medical imaging. In this paper we introduce a new medical technology paradigm centered on wireless technology and cloud computing that was designed to overcome the problems of increasing health technology costs. We demonstrate the value of the concept with an example; the design of a wireless, distributed network and central (cloud) computing enabled three-dimensional (3-D) ultrasound system. Specifically, we demonstrate the feasibility of producing a 3-D high end ultrasound scan at a central computing facility using the raw data acquired at the remote patient site with an inexpensive low end ultrasound transducer designed for 2-D, through a mobile device and wireless connection link between them. Producing high-end 3D ultrasound images with simple low-end transducers reduces the cost of imaging by orders of magnitude. It also removes the requirement of having a highly trained imaging expert at the patient site, since the need for hand-eye coordination and the ability to reconstruct a 3-D mental image from 2-D scans, which is a necessity for high quality ultrasound imaging, is eliminated. This could enable relatively untrained medical workers in developing nations to administer imaging and a more accurate diagnosis, effectively saving the lives of people.

  9. Wireless Networks: New Meaning to Ubiquitous Computing.

    Science.gov (United States)

    Drew, Wilfred, Jr.

    2003-01-01

    Discusses the use of wireless technology in academic libraries. Topics include wireless networks; standards (IEEE 802.11); wired versus wireless; why libraries implement wireless technology; wireless local area networks (WLANs); WLAN security; examples of wireless use at Indiana State University and Morrisville College (New York); and useful…

  10. Decision support software technology demonstration plan

    Energy Technology Data Exchange (ETDEWEB)

    SULLIVAN,T.; ARMSTRONG,A.

    1998-09-01

    The performance evaluation of innovative and alternative environmental technologies is an integral part of the US Environmental Protection Agency's (EPA) mission. Early efforts focused on evaluating technologies that supported the implementation of the Clean Air and Clean Water Acts. In 1986 the Agency began to demonstrate and evaluate the cost and performance of remediation and monitoring technologies under the Superfund Innovative Technology Evaluation (SITE) program (in response to the mandate in the Superfund Amendments and Reauthorization Act of 1986 (SARA)). In 1990, the US Technology Policy was announced. This policy placed a renewed emphasis on making the best use of technology in achieving the national goals of improved quality of life for all Americans, continued economic growth, and national security. In the spirit of the technology policy, the Agency began to direct a portion of its resources toward the promotion, recognition, acceptance, and use of US-developed innovative environmental technologies both domestically and abroad. Decision Support Software (DSS) packages integrate environmental data and simulation models into a framework for making site characterization, monitoring, and cleanup decisions. To limit the scope which will be addressed in this demonstration, three endpoints have been selected for evaluation: Visualization; Sample Optimization; and Cost/Benefit Analysis. Five topics are covered in this report: the objectives of the demonstration; the elements of the demonstration plan; an overview of the Site Characterization and Monitoring Technology Pilot; an overview of the technology verification process; and the purpose of this demonstration plan.

  11. Sensor technology more than a support.

    Science.gov (United States)

    Olsson, Anna; Persson, Ann-Christine; Bartfai, Aniko; Boman, Inga-Lill

    2018-03-01

    This interview study is a part of a project that evaluated sensor technology as a support in everyday activities for patients with memory impairment. To explore patients with memory impairment and their partners' experiences of using sensor technology in their homes. Five patients with memory impairment after stroke and three partners were interviewed. Individual semi-structured interviews were analyzed with qualitative content analysis. Installing sensor technology with individually prerecorded voice reminders as memory support in the home had a broad impact on patients' and their families' lives. These effects were both positive and negative. The sensor technology not only supported activities but also influenced the patients by changing behavior, providing a sense of security, independence and increased self-confidence. For the partners, the sensor technology eased daily life, but also gave increased responsibility for maintenance. Technical problems led to frustration and stress for the patients. The results indicate that sensor technology has potential to increase opportunities for persons with memory impairment to perform and participate in activities and to unburden their partners. The results may promote an understanding of how sensor technology can be used to support persons with memory impairment in their homes.

  12. Applications of modern sensors and wireless technology in effective wound management.

    Science.gov (United States)

    Mehmood, Nasir; Hariz, Alex; Fitridge, Robert; Voelcker, Nicolas H

    2014-05-01

    The management of chronic wounds has emerged as a major health care challenge during the 21st century consuming, significant portions of health care budgets. Chronic wounds such as diabetic foot ulcers, leg ulcers, and pressure sores have a significant negative impact on the quality of life of affected individuals. Covering wounds with suitable dressings facilitates the healing process and is common practice in wound management plans. However, standard dressings do not provide insights into the status of the wound underneath. Parameters such as moisture, pressure, temperature and pH inside the dressings are indicative of the healing rate, infection, and wound healing phase. But owing to the lack of information available from within the dressings, these are often changed to inspect the wound, disturbing the normal healing process of wounds in addition to causing pain to the patient. Sensors embedded in the dressing would provide clinicians and nurses with important information that would aid in wound care decision making, improve patient comfort, and reduce the frequency of dressing changes. The potential benefits of this enabling technology would be seen in terms of a reduction in hospitalization time and health care cost. Modern sensing technology along with wireless radio frequency communication technology is poised to make significant advances in wound management. This review discusses issues related to the design and implementation of sensor technology and telemetry systems both incorporated in wound dressings to devise an automated wound monitoring technology, and also surveys the literature available on current sensor and wireless telemetry systems. Copyright © 2013 Wiley Periodicals, Inc.

  13. Application of wireless sensor network based on ZigBee technology in photo-bioreactors system

    Science.gov (United States)

    Liu, Bo; Chen, Ming; Chi, Tao

    2013-03-01

    A photo-bioreactor is a bioreactor that incorporates some types of light source to provide photonic energy input into the reactor[1][2]. In the situation of Large-scale industrialization production of micro-algae, hundreds of photo-bioreactors will be deployed in a factory, thus the design of entire system is based on the distribution theory and the remote monitoring must be deployed. So the communication in the entire photo-bioreactors system is very important. However, the recent solution of communication is based on RS-485 data bus, and the twisted-pair cable is used as the communication medium, so the flexibility and scalability of entire system reduce. In this paper, the wireless sensor network (WSN) based on ZigBee technology is applied to this photo-bioreactors system, and the related key problems include the architecture of entire system and the design of wireless sensor network nodes[3]~[6]. The application of this technology will also reduce the cost and effectively raise the intelligence level of the large-scale industrialization photo-bioreactors system.

  14. Using technology to support science inquiry learning

    Directory of Open Access Journals (Sweden)

    P John Williams

    2017-03-01

    Full Text Available This paper presents a case study of a teacher’s experience in implementing an inquiry approach to his teaching over a period of two years with two different classes. His focus was on using a range of information technologies to support student inquiry learning. The study demonstrates the need to consider the characteristics of students when implementing an inquiry approach, and also the influence of the teachers level of understanding and related confidence in such an approach. The case also indicated that a range of technologies can be effective in supporting student inquiry learning.

  15. Source Authentication for Code Dissemination Supporting Dynamic Packet Size in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Daehee Kim

    2016-07-01

    Full Text Available Code dissemination in wireless sensor networks (WSNs is a procedure for distributing a new code image over the air in order to update programs. Due to the fact that WSNs are mostly deployed in unattended and hostile environments, secure code dissemination ensuring authenticity and integrity is essential. Recent works on dynamic packet size control in WSNs allow enhancing the energy efficiency of code dissemination by dynamically changing the packet size on the basis of link quality. However, the authentication tokens attached by the base station become useless in the next hop where the packet size can vary according to the link quality of the next hop. In this paper, we propose three source authentication schemes for code dissemination supporting dynamic packet size. Compared to traditional source authentication schemes such as μTESLA and digital signatures, our schemes provide secure source authentication under the environment, where the packet size changes in each hop, with smaller energy consumption.

  16. A Wireless Sensor Network-Based Approach with Decision Support for Monitoring Lake Water Quality

    Directory of Open Access Journals (Sweden)

    Xiaoci Huang

    2015-11-01

    Full Text Available Online monitoring and water quality analysis of lakes are urgently needed. A feasible and effective approach is to use a Wireless Sensor Network (WSN. Lake water environments, like other real world environments, present many changing and unpredictable situations. To ensure flexibility in such an environment, the WSN node has to be prepared to deal with varying situations. This paper presents a WSN self-configuration approach for lake water quality monitoring. The approach is based on the integration of a semantic framework, where a reasoner can make decisions on the configuration of WSN services. We present a WSN ontology and the relevant water quality monitoring context information, which considers its suitability in a pervasive computing environment. We also propose a rule-based reasoning engine that is used to conduct decision support through reasoning techniques and context-awareness. To evaluate the approach, we conduct usability experiments and performance benchmarks.

  17. A Wireless Sensor Network-Based Approach with Decision Support for Monitoring Lake Water Quality.

    Science.gov (United States)

    Huang, Xiaoci; Yi, Jianjun; Chen, Shaoli; Zhu, Xiaomin

    2015-11-19

    Online monitoring and water quality analysis of lakes are urgently needed. A feasible and effective approach is to use a Wireless Sensor Network (WSN). Lake water environments, like other real world environments, present many changing and unpredictable situations. To ensure flexibility in such an environment, the WSN node has to be prepared to deal with varying situations. This paper presents a WSN self-configuration approach for lake water quality monitoring. The approach is based on the integration of a semantic framework, where a reasoner can make decisions on the configuration of WSN services. We present a WSN ontology and the relevant water quality monitoring context information, which considers its suitability in a pervasive computing environment. We also propose a rule-based reasoning engine that is used to conduct decision support through reasoning techniques and context-awareness. To evaluate the approach, we conduct usability experiments and performance benchmarks.

  18. Wireless Sensor for Measuring Pump Efficiency: Small Business Voucher Project with KCF Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Gehl, Anthony C [ORNL; Liu, Xiaobing [ORNL; Koopman, Gary [KCF Technologies; Fugate, David L [ORNL

    2017-01-23

    This document is to fulfill the final report requirements for the Small Business Voucher (SBV) CRADA project with ORNL and KCF Technologies (CRADA/NFE-16-06133). Pumping systems account for nearly 20% of the world’s electrical energy demand and range from 25-50% of the energy usage in many industrial and building power plants. The energy cost is the largest element in the total cost of owning a pump (~40%). In response to a recent DOE mandate for improved pump efficiency pump manufacturers are preparing for the changes that the impending regulations will bring, including design improvements. This mandate also establishes a need for new low cost pump efficiency measurement systems. The standard industry definition of pump efficiency is the mechanical water horsepower delivered divided by the electrical horsepower input to the motor. KCF Technologies has developed a new sensor measurement technique to estimate fluid pump efficiency using a thermodynamic approach. KCF Technologies applied for a SBV grant with ORNL as the research partner. KCF needed a research partner with the proper facilities to demonstrate the efficacy of its wireless sensor unit for measuring pump efficiency. The ORNL Building Technologies Research and Integration Center (BTRIC) test resources were used to test and demonstrate the successful measurement of pump efficiency with the KCF sensor technology. KCF is now working on next steps to commercialize this sensing technology.

  19. Wireless Technology Recognition Based on RSSI Distribution at Sub-Nyquist Sampling Rate for Constrained Devices.

    Science.gov (United States)

    Liu, Wei; Kulin, Merima; Kazaz, Tarik; Shahid, Adnan; Moerman, Ingrid; De Poorter, Eli

    2017-09-12

    Driven by the fast growth of wireless communication, the trend of sharing spectrum among heterogeneous technologies becomes increasingly dominant. Identifying concurrent technologies is an important step towards efficient spectrum sharing. However, due to the complexity of recognition algorithms and the strict condition of sampling speed, communication systems capable of recognizing signals other than their own type are extremely rare. This work proves that multi-model distribution of the received signal strength indicator (RSSI) is related to the signals' modulation schemes and medium access mechanisms, and RSSI from different technologies may exhibit highly distinctive features. A distinction is made between technologies with a streaming or a non-streaming property, and appropriate feature spaces can be established either by deriving parameters such as packet duration from RSSI or directly using RSSI's probability distribution. An experimental study shows that even RSSI acquired at a sub-Nyquist sampling rate is able to provide sufficient features to differentiate technologies such as Wi-Fi, Long Term Evolution (LTE), Digital Video Broadcasting-Terrestrial (DVB-T) and Bluetooth. The usage of the RSSI distribution-based feature space is illustrated via a sample algorithm. Experimental evaluation indicates that more than 92% accuracy is achieved with the appropriate configuration. As the analysis of RSSI distribution is straightforward and less demanding in terms of system requirements, we believe it is highly valuable for recognition of wideband technologies on constrained devices in the context of dynamic spectrum access.

  20. Wireless sEMG-Based Body-Machine Interface for Assistive Technology Devices.

    Science.gov (United States)

    Fall, Cheikh Latyr; Gagnon-Turcotte, Gabriel; Dube, Jean-Francois; Gagne, Jean Simon; Delisle, Yanick; Campeau-Lecours, Alexandre; Gosselin, Clement; Gosselin, Benoit

    2017-07-01

    Assistive technology (AT) tools and appliances are being more and more widely used and developed worldwide to improve the autonomy of people living with disabilities and ease the interaction with their environment. This paper describes an intuitive and wireless surface electromyography (sEMG) based body-machine interface for AT tools. Spinal cord injuries at C5-C8 levels affect patients' arms, forearms, hands, and fingers control. Thus, using classical AT control interfaces (keypads, joysticks, etc.) is often difficult or impossible. The proposed system reads the AT users' residual functional capacities through their sEMG activity, and converts them into appropriate commands using a threshold-based control algorithm. It has proven to be suitable as a control alternative for assistive devices and has been tested with the JACO arm, an articulated assistive device of which the vocation is to help people living with upper-body disabilities in their daily life activities. The wireless prototype, the architecture of which is based on a 3-channel sEMG measurement system and a 915-MHz wireless transceiver built around a low-power microcontroller, uses low-cost off-the-shelf commercial components. The embedded controller is compared with JACO's regular joystick-based interface, using combinations of forearm, pectoral, masseter, and trapeze muscles. The measured index of performance values is 0.88, 0.51, and 0.41 bits/s, respectively, for correlation coefficients with the Fitt's model of 0.75, 0.85, and 0.67. These results demonstrate that the proposed controller offers an attractive alternative to conventional interfaces, such as joystick devices, for upper-body disabled people using ATs such as JACO.

  1. EV Charging Through Wireless Power Transfer: Analysis of Efficiency Optimization and Technology Trends

    Energy Technology Data Exchange (ETDEWEB)

    Miller, John M [ORNL; Rakouth, Heri [Delphi Automotive Systems, USA; Suh, In-Soo [Korea Advanced Institute of Science and Technology

    2012-01-01

    This paper is aimed at reviewing the technology trends for wireless power transfer (WPT) for electric vehicles (EV). It also analyzes the factors affecting its efficiency and describes the techniques currently used for its optimization. The review of the technology trends encompasses both stationary and moving vehicle charging systems. The study of the stationary vehicle charging technology is based on current implementations and on-going developments at WiTricity and Oak Ridge National Lab (ORNL). The moving vehicle charging technology is primarily described through the results achieved by the Korean Advanced Institute of Technology (KAIST) along with on-going efforts at Stanford University. The factors affecting the efficiency are determined through the analysis of the equivalent circuit of magnetic resonant coupling. The air gap between both transmitting and receiving coils along with the magnetic field distribution and the relative impedance mismatch between the related circuits are the primary factors affecting the WPT efficiency. Currently the industry is looking at an air gap of 25 cm or below. To control the magnetic field distribution, Kaist has recently developed the Shaped Magnetic Field In Resonance (SMFIR) technology that uses conveniently shaped ferrite material to provide low reluctance path. The efficiency can be further increased by means of impedance matching. As a result, Delphi's implementation of the WiTricity's technology exhibits a WPT efficiency above 90% for stationary charging while KAIST has demonstrated a maximum efficiency of 83% for moving vehicle with its On Line Vehicle (OLEV) project. This study is restricted to near-field applications (short and mid-range) and does not address long-range technology such as microwave power transfer that has low efficiency as it is based on radiating electromagnetic waves. This paper exemplifies Delphi's work in powertrain electrification as part of its innovation for the real world

  2. Wireless Sensing Based on RFID and Capacitive Technologies for Safety in Marble Industry Process Control

    Directory of Open Access Journals (Sweden)

    Fabrizio Iacopetti

    2013-01-01

    Full Text Available This paper presents wireless sensing systems to increase safety and robustness in industrial process control, particularly in industrial machines for marble slab working. The process is performed by abrasive or cutting heads activated independently by the machine controller when the slab, transported on a conveyer belt, is under them. Current slab detection systems are based on electromechanical or optical devices at the machine entrance stage, suffering from deterioration and from the harsh environment. Slab displacement or break inside the machine due to the working stress may result in safety issues and damages to the conveyer belt due to incorrect driving of the working tools. The experimented contactless sensing techniques are based on four RFID and two capacitive sensing technologies and on customized hardware/software. The proposed solutions aim at overcoming some limitations of current state-of-the-art detection systems, allowing for reliable slab detection, outside and/or inside the machine, while maintaining low complexity and at the same time robustness to industrial harsh conditions. The proposed sensing devices may implement a wireless or wired sensor network feeding detection data to the machine controller. Data integrity check and process control algorithms have to be implemented for the safety and reliability of the overall industrial process.

  3. Technology development activities supporting tank waste remediation

    Energy Technology Data Exchange (ETDEWEB)

    Bonner, W.F.; Beeman, G.H.

    1994-06-01

    This document summarizes work being conducted under the U.S. Department of Energy`s Office of Technology Development (EM-50) in support of the Tank Waste Remediation System (TWRS) Program. The specific work activities are organized by the following categories: safety, characterization, retrieval, barriers, pretreatment, low-level waste, and high-level waste. In most cases, the activities presented here were identified as supporting tank remediation by EM-50 integrated program or integrated demonstration lead staff and the selections were further refined by contractor staff. Data sheets were prepared from DOE-HQ guidance to the field issued in September 1993. Activities were included if a significant portion of the work described provides technology potentially needed by TWRS; consequently, not all parts of each description necessarily support tank remediation.

  4. Standardized Low-Power Wireless Communication Technologies for Distributed Sensing Applications

    Directory of Open Access Journals (Sweden)

    Xavier Vilajosana

    2014-02-01

    Full Text Available Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH and DASH7 Alliance Mode (D7AM, are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA, are based on contention medium access control (MAC layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers.

  5. Standardized low-power wireless communication technologies for distributed sensing applications.

    Science.gov (United States)

    Vilajosana, Xavier; Tuset-Peiro, Pere; Vazquez-Gallego, Francisco; Alonso-Zarate, Jesus; Alonso, Luis

    2014-02-10

    Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH) and DASH7 Alliance Mode (D7AM), are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA), are based on contention medium access control (MAC) layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT) paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers.

  6. Computational Support for Technology- Investment Decisions

    Science.gov (United States)

    Adumitroaie, Virgil; Hua, Hook; Lincoln, William; Block, Gary; Mrozinski, Joseph; Shelton, Kacie; Weisbin, Charles; Elfes, Alberto; Smith, Jeffrey

    2007-01-01

    Strategic Assessment of Risk and Technology (START) is a user-friendly computer program that assists human managers in making decisions regarding research-and-development investment portfolios in the presence of uncertainties and of non-technological constraints that include budgetary and time limits, restrictions related to infrastructure, and programmatic and institutional priorities. START facilitates quantitative analysis of technologies, capabilities, missions, scenarios and programs, and thereby enables the selection and scheduling of value-optimal development efforts. START incorporates features that, variously, perform or support a unique combination of functions, most of which are not systematically performed or supported by prior decision- support software. These functions include the following: Optimal portfolio selection using an expected-utility-based assessment of capabilities and technologies; Temporal investment recommendations; Distinctions between enhancing and enabling capabilities; Analysis of partial funding for enhancing capabilities; and Sensitivity and uncertainty analysis. START can run on almost any computing hardware, within Linux and related operating systems that include Mac OS X versions 10.3 and later, and can run in Windows under the Cygwin environment. START can be distributed in binary code form. START calls, as external libraries, several open-source software packages. Output is in Excel (.xls) file format.

  7. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  8. Eating of the pudding : supporting the development of life-cycle of wireless sensor networks for environmental monitoring scientists and ecologists

    NARCIS (Netherlands)

    Zhang, Kui

    2015-01-01

    In this thesis we present design and tooling solutions as well as network protocols to support application experts in the entire development life-cycle of wireless sensor networks. The complete life-cycle of wireless sensor networks starts with the user/application requirement analysis. It then goes

  9. An Easy to Deploy Street Light Control System Based on Wireless Communication and LED Technology

    Directory of Open Access Journals (Sweden)

    Jesús Villadangos

    2013-05-01

    Full Text Available This paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aware of their surrounding’s environmental conditions, a fact that will be approached for the system intelligence in order to learn, and later, apply dynamic rules. The knowledge of real time illumination needs, in terms of instant use of the street in which it is installed, will also feed our system, with the objective of providing tangible solutions to reduce energy consumption according to the contextual needs, an exact calculation of energy consumption and reliable mechanisms for preventive maintenance of facilities.

  10. An easy to deploy street light control system based on wireless communication and LED technology.

    Science.gov (United States)

    Elejoste, Pilar; Angulo, Ignacio; Perallos, Asier; Chertudi, Aitor; Zuazola, Ignacio Julio García; Moreno, Asier; Azpilicueta, Leire; Astrain, José Javier; Falcone, Francisco; Villadangos, Jesús

    2013-05-16

    This paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aware of their surrounding's environmental conditions, a fact that will be approached for the system intelligence in order to learn, and later, apply dynamic rules. The knowledge of real time illumination needs, in terms of instant use of the street in which it is installed, will also feed our system, with the objective of providing tangible solutions to reduce energy consumption according to the contextual needs, an exact calculation of energy consumption and reliable mechanisms for preventive maintenance of facilities.

  11. Research on diversity receive technology for wireless optical communication using PPM in weak turbulence atmosphere channel

    Science.gov (United States)

    Liu, Yang; Zhang, Guo-an

    2014-09-01

    In order to mitigate atmospheric turbulence, the free space optical (FSO) system model with spatial diversity is analyzed based on intensity detection pulse position modulation (PPM) in the weak turbulence atmosphere. The slot error rate (SER) calculating formula of the system without diversity is derived under pulse position modulation firstly. Then as a benchmark, independent of identical distribution, the average slot error rates of the three linear combining technologies, which are the maximal ratio combining (MRC), equal gain combining (EGC) and selection combining (SelC), are compared. Simulation results show that the performance of system is the best improved by MRC, followed by EGC, and is poor by SelC, but SelC is simpler and more convenient. Spatial diversity is efficient to improve the performance and has strong ability on resistance to atmospheric channel decline. The above scheme is more suitable for optical wireless communication systems.

  12. An Easy to Deploy Street Light Control System Based on Wireless Communication and LED Technology

    Science.gov (United States)

    Elejoste, Pilar; Angulo, Ignacio; Perallos, Asier; Chertudi, Aitor; Zuazola, Ignacio Julio García; Moreno, Asier; Azpilicueta, Leire; Astrain, José Javier; Falcone, Francisco; Villadangos, Jesús

    2013-01-01

    This paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aware of their surrounding's environmental conditions, a fact that will be approached for the system intelligence in order to learn, and later, apply dynamic rules. The knowledge of real time illumination needs, in terms of instant use of the street in which it is installed, will also feed our system, with the objective of providing tangible solutions to reduce energy consumption according to the contextual needs, an exact calculation of energy consumption and reliable mechanisms for preventive maintenance of facilities. PMID:23681092

  13. a Gan on sic Hfet Device Technology for Wireless Infrastructure Applications

    Science.gov (United States)

    Green, B.; Henry, H.; Moore, K.; Abdou, J.; Lawrence, R.; Clayton, F.; Miller, M.; Crowder, J.; Mares, E.; Hartin, O.; Liu, C.; Weitzel, C.

    2007-06-01

    This paper presents Freescale's baseline GaN device technology for wireless infrastructure applications. At 48 V drain bias and 2.1 GHz operating frequency 10-11 W/mm, 62-67% power-added efficiency (PAE) is realized on 0.3 mm devices and 74 W (5.9 W/mm), 55% PAE is demonstrated for 12.6 mm devices. A simple thermal model shows that a more than twofold increase in channel temperature is responsible for limiting the CW power density on the 12.6 mm compared to 0.3 mm devices. The addition of through wafer source vias to improve gain and tuning the device in a fixture optimized for efficiency yield an output power of 57W (4.7 W/mm), PAE of 66%, and a calculated channel temperature of approximately 137°C at a 28 V bias.

  14. Support Vector Machine Based Mobility Prediction Scheme in Heterogeneous Wireless Networks

    Directory of Open Access Journals (Sweden)

    Jiamei Chen

    2015-01-01

    Full Text Available To improve the intelligence of the mobile-aware applications in the heterogeneous wireless networks (HetNets, it is essential to establish an advanced mechanism to anticipate the change of the user location in every subnet for HetNets. This paper proposes a multiclass support vector machine based mobility prediction (Multi-SVMMP scheme to estimate the future location of mobile users according to the movement history information of each user in HetNets. In the location prediction process, the regular and random user movement patterns are treated differently, which can reflect the user movements more realistically than the existing movement models in HetNets. And different forms of multiclass support vector machines are embedded in the two mobility patterns according to the different characteristics of the two mobility patterns. Moreover, the introduction of target region (TR cuts down the energy consumption efficiently without impacting the prediction accuracy. As reported in the simulations, our Multi-SVMMP can overcome the difficulties found in the traditional methods and obtain a higher prediction accuracy and user adaptability while reducing the cost of prediction resources.

  15. Energy-Efficient Region Shift Scheme to Support Mobile Sink Group in Wireless Sensor Networks.

    Science.gov (United States)

    Yim, Yongbin; Kim, Kyong Hoon; Aldwairi, Monther; Kim, Ki-Il

    2017-12-30

    Mobile sink groups play crucial roles to perform their own missions in many wireless sensor network (WSN) applications. In order to support mobility of such sink groups, it is important to design a mechanism for effective discovery of the group in motion. However, earlier studies obtain group region information by periodic query. For that reason, the mechanism leads to significant signaling overhead due to frequent flooding for the query regardless of the group movement. Furthermore, the mechanism worsens the problem by the flooding in the whole expected area. To deal with this problem, we propose a novel mobile sink group support scheme with low communication cost, called Region-Shift-based Mobile Geocasting Protocol (RSMGP). In this study, we utilize the group mobility feature for which members of a group have joint motion patterns. Thus, we could trace group movement by shifting the region as much as partial members move out of the previous region. Furthermore, the region acquisition is only performed at the moment by just deviated members without collaboration of all members. Experimental results validate the improved signaling overhead of our study compared to the previous studies.

  16. PS2-17: Diabetes Social Support Feasibility Pilot Study: Utilizing Mobile Technology and Self-Identified Supporters to Enhance Self-Monitoring of Blood Glucose

    Science.gov (United States)

    Robinson, Brandi; Roblin, Douglas; Hipkens, James; Vupputuri, Suma; McMahon, Kevin

    2010-01-01

    Background and Aims: Self-monitoring of blood glucose (SMBG) is associated with improved glycemic control among patients with type 2 diabetes, however, the practice of daily self-monitoring is not optimal. Telecommunications technology may improve adherence to recommended self-management practices by remotely transmitting automated reminders to motivate patients, and utilizing social networking for peer support. The purpose of this pilot study is to demonstrate the feasibility and usability of mobile technology and the potential added value of social support to improve SMBG frequency and glycemic control among adults with type 2 diabetes. Methods: Adults 25–74 years of age with type 2 DM and an average HbA1c > 8.0% were recruited from Kaiser Permanente Georgia (KPGA) and Oakhurst Medical Center (OMC, a community health clinic) to participate in a 3-month study using wireless technology. Enrollment sessions with presentations on SMBG techniques, use of the wireless technology, and motivational coaching to enhance social support were conducted in November 2009. During the subsequent 3-months, both diabetes patients and their self-selected supporters will receive text messages to their cell phones summarizing a patient’s SMBG frequency and levels. Participants and their supporters will attend a disenrollment session in February 2010 when feasibility and usability will be assessed in focus groups. Results: 6 of 161 eligible diabetes patients at KPGA and 9 of 28 eligible diabetes patients at OMC, and their self-selected supporters, consented to participate. The average age of diabetes patients was 49.3 years. 86.7% (N=13) were African-American; and 33.3% (N=5) were male. Five days after enrollment, 60% (N=9) of patients had connected their wireless transmitters and had current blood glucose data. Follow-up phone calls will be made to ensure that all participants are connected to the wireless technology within 10 days of the enrollment session. Conclusion

  17. Wireless Technician

    Science.gov (United States)

    Tech Directions, 2011

    2011-01-01

    One of the hottest areas in technology is invisible. Wireless communications allow people to transmit voice messages, data, and other signals through the air without physically connecting senders to receivers with cables or wires. And the technology is spreading at lightning speed. Cellular phones, personal digital assistants, and wireless…

  18. Ingestible Wireless Capsule Technology: A Review of Development and Future Indication

    Directory of Open Access Journals (Sweden)

    M. R. Basar

    2012-01-01

    Full Text Available Ingestible wireless capsule endoscopy (WCE is the one and only painless, effective, novel, diagnostic technology for inspecting the entire gastrointestinal (GI tract for various diseases, such as obscure gastrointestinal bleeding (OGIB, tumors, cancer, Crohn’s disease, and celiac disease. Since the development of this technology, several companies have made remarkable improvements in their clinical products, but there are still some limitations that relate to the use of conventional wired endoscopy. Some of the major limitations that currently impede its wider application include its inability to repeat the view of critical areas, working time constraints, and poor image resolution. Many research groups currently are working on ways to solve these limitations. Presently, developing the ability to control the movement of the capsule, increasing its image transmission speed, and obtaining high-quality images are the main issues in the research area. A complex capsule with some therapeutic tools for the treatment of diseases of the GI tract also is at the beginning of development for the next generation of an active medical robot. In this paper, we report the status of several activities related to WCE, including improvement of capsule technology, research progress, technical challenges, and key indicators concerning the next-generation, active, medical robot.

  19. Assistive technology for memory support in dementia.

    Science.gov (United States)

    Van der Roest, Henriëtte G; Wenborn, Jennifer; Pastink, Channah; Dröes, Rose-Marie; Orrell, Martin

    2017-06-11

    The sustained interest in electronic assistive technology in dementia care has been fuelled by the urgent need to develop useful approaches to help support people with dementia at home. Also the low costs and wide availability of electronic devices make it more feasible to use electronic devices for the benefit of disabled persons. Information Communication Technology (ICT) devices designed to support people with dementia are usually referred to as Assistive Technology (AT) or Electronic Assistive Technology (EAT). By using AT in this review we refer to electronic assistive devices. A range of AT devices has been developed to support people with dementia and their carers to manage their daily activities and to enhance safety, for example electronic pill boxes, picture phones, or mobile tracking devices. Many are commercially available. However, the usefulness and user-friendliness of these devices are often poorly evaluated. Although reviews of (electronic) memory aids do exist, a systematic review of studies focusing on the efficacy of AT for memory support in people with dementia is lacking. Such a review would guide people with dementia and their informal and professional carers in selecting appropriate AT devices. Primary objectiveTo assess the efficacy of AT for memory support in people with dementia in terms of daily performance of personal and instrumental activities of daily living (ADL), level of dependency, and admission to long-term care. Secondary objectiveTo assess the impact of AT on: users (autonomy, usefulness and user-friendliness, adoption of AT); cognitive function and neuropsychiatric symptoms; need for informal and formal care; perceived quality of life; informal carer burden, self-esteem and feelings of competence; formal carer work satisfaction, workload and feelings of competence; and adverse events. We searched ALOIS, the Specialised Register of the Cochrane Dementia and Cognitive Improvement Group (CDCIG), on 10 November 2016. ALOIS is

  20. Community Wireless Networks

    Science.gov (United States)

    Feld, Harold

    2005-01-01

    With increasing frequency, communities are seeing the arrival of a new class of noncommercial broadband providers: community wireless networks (CWNs). Utilizing the same wireless technologies that many colleges and universities have used to create wireless networks on campus, CWNs are creating broadband access for free or at costs well below…

  1. Technology Applications that Support Space Exploration

    Science.gov (United States)

    Henderson, Edward M.; Holderman, Mark L.

    2011-01-01

    Several enabling technologies have been identified that would provide significant benefits for future space exploration. In-Space demonstrations should be chosen so that these technologies will have a timely opportunity to improve efficiencies and reduce risks for future spaceflight. An early window exists to conduct ground and flight demonstrations that make use of existing assets that were developed for the Space Shuttle and the Constellation programs. The work could be mostly performed using residual program civil servants, existing facilities and current commercial launch capabilities. Partnering these abilities with the emerging commercial sector, along with other government agencies, academia and with international partners would provide an affordable and timely approach to get the launch costs down for these payloads, while increasing the derived benefits to a larger community. There is a wide scope of varied technologies that are being considered to help future space exploration. However, the cost and schedule would be prohibitive to demonstrate all these in the near term. Determining which technologies would yield the best return in meeting our future space needs is critical to building an achievable Space Architecture that allows exploration beyond Low Earth Orbit. The best mix of technologies is clearly to be based on our future needs, but also must take into account the availability of existing assets and supporting partners. Selecting those technologies that have complimentary applications will provide the most knowledge, with reasonable cost, for future use The plan is to develop those applications that not only mature the technology but actually perform a useful task or mission. These might include such functions as satellite servicing, a propulsion stage, processing lunar regolith, generating and transmitting solar power, cryogenic fluid transfer and storage and artificial gravity. Applications have been selected for assessment for future

  2. A Cross-Layer Duty Cycle MAC Protocol Supporting a Pipeline Feature for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Young-Chon Kim

    2011-05-01

    Full Text Available Although the conventional duty cycle MAC protocols for Wireless Sensor Networks (WSNs such as RMAC perform well in terms of saving energy and reducing end-to-end delivery latency, they were designed independently and require an extra routing protocol in the network layer to provide path information for the MAC layer. In this paper, we propose a new cross-layer duty cycle MAC protocol with data forwarding supporting a pipeline feature (P-MAC for WSNs. P-MAC first divides the whole network into many grades around the sink. Each node identifies its grade according to its logical hop distance to the sink and simultaneously establishes a sleep/wakeup schedule using the grade information. Those nodes in the same grade keep the same schedule, which is staggered with the schedule of the nodes in the adjacent grade. Then a variation of the RTS/CTS handshake mechanism is used to forward data continuously in a pipeline fashion from the higher grade to the lower grade nodes and finally to the sink. No extra routing overhead is needed, thus increasing the network scalability while maintaining the superiority of duty-cycling. The simulation results in OPNET show that P-MAC has better performance than S-MAC and RMAC in terms of packet delivery latency and energy efficiency.

  3. Target Localization in Wireless Sensor Networks Using Online Semi-Supervised Support Vector Regression

    Directory of Open Access Journals (Sweden)

    Jaehyun Yoo

    2015-05-01

    Full Text Available Machine learning has been successfully used for target localization in wireless sensor networks (WSNs due to its accurate and robust estimation against highly nonlinear and noisy sensor measurement. For efficient and adaptive learning, this paper introduces online semi-supervised support vector regression (OSS-SVR. The first advantage of the proposed algorithm is that, based on semi-supervised learning framework, it can reduce the requirement on the amount of the labeled training data, maintaining accurate estimation. Second, with an extension to online learning, the proposed OSS-SVR automatically tracks changes of the system to be learned, such as varied noise characteristics. We compare the proposed algorithm with semi-supervised manifold learning, an online Gaussian process and online semi-supervised colocalization. The algorithms are evaluated for estimating the unknown location of a mobile robot in a WSN. The experimental results show that the proposed algorithm is more accurate under the smaller amount of labeled training data and is robust to varying noise. Moreover, the suggested algorithm performs fast computation, maintaining the best localization performance in comparison with the other methods.

  4. Wireless Communications

    Science.gov (United States)

    1991-01-01

    A technology utilization project led to the commercial adaptation of a Space Shuttle Orbiter wireless infrared voice communications system. The technology was adapted to a LAN system by Wilton Industries, one of the participants. Because the system is cable-free, installation charges are saved, and it can be used where cable is impractical. Resultant products include the IRplex 6000. Transceivers can be located anywhere and can include mobile receivers. The system provides wireless LAN coverage up to 44,000 square feet. applications include stock exchange communications, trade shows, emergency communications, etc.

  5. Investigating extreme event loading on coastal bridges using wireless sensor technology

    Science.gov (United States)

    Gelineau, Douglas A.; Davis, Justin R.; Rice, Jennifer A.

    2017-04-01

    Coastal infrastructure, such as bridges, are susceptible to many forms of coastal hazards: particularly hurricane surge and wave loading. These two forms of loading can cause catastrophic damage to aging highway infrastructure. It is estimated that storm damage costs the United States about $50 Billion per year. In light of this, it is crucial that we understand the damaging forces placed on infrastructure during storm events so that we can develop safer and more resilient coastal structures. This paper presents the ongoing research to enable the efficient collection of extreme event loads acting on both the substructure and superstructure of low clearance, simple span, reinforced concrete bridges. Bridges of this type were commonly constructed during the 1950's and 60's and are particularly susceptible to deck unseating caused by hurricane surge and wave loading. The sensing technology used to capture this data must be ruggedized to survive in an extremely challenging environment, be designed to allow for redundancy in the event of sensors or other network components being lost in the storm, and be relatively low cost to allow for more bridges to be instrumented per storm event. The prototype system described in this paper includes wireless technology, rapid data transmission, and, for the sensors, self-contained power. While this specific application focuses on hurricane hazards, the framework can be extended to include other natural hazards.

  6. A wireless recording system that utilizes Bluetooth technology to transmit neural activity in freely moving animals.

    Science.gov (United States)

    Hampson, Robert E; Collins, Vernell; Deadwyler, Sam A

    2009-09-15

    A new wireless transceiver is described for recording individual neuron firing from behaving rats utilizing Bluetooth transmission technology and a processor onboard for discrimination of neuronal waveforms and associated time stamps. This universal brain activity transmitter (UBAT) is attached to rodents via a backpack and amplifier headstage and can transmit 16 channels of captured neuronal firing data via a Bluetooth transceiver chip over very large and unconstrained distances. The onboard microprocessor of the UBAT allows flexible online control over waveform isolation criteria via transceiver instruction and the two-way communication capacity allows for closed-loop applications between neural events and behavioral or physiological processes which can be modified by transceiver instructions. A detailed description of the multiplexer processing of channel data as well as examples of neuronal recordings in different behavioral testing contexts is provided to demonstrate the capacity for robust transmission within almost any laboratory environment. A major advantage of the UBAT is the long transmission range and lack of object-based line of sight interference afforded by Bluetooth technology, allowing flexible recording capabilities within multiple experimental paradigms without interruption. Continuous recordings over very large distance separations from the monitor station are demonstrated providing experimenters with recording advantages not previously available with other telemetry devices.

  7. Telebation: next-generation telemedicine in remote airway management using current wireless technologies.

    Science.gov (United States)

    Mosier, Jarrod; Joseph, Bellal; Sakles, John C

    2013-02-01

    Since the first remote intubation with telemedicine guidance, wireless technology has advanced to enable more portable methods of telemedicine involvement in remote airway management. Three voice over Internet protocol (VoIP) services were evaluated for quality of image transmitted, data lag, and audio quality with remotely observed and assisted intubations in an academic emergency department. The VoIP clients evaluated were Apple (Cupertino, CA) FaceTime(®), Skype™ (a division of Microsoft, Luxembourg City, Luxembourg), and Tango(®) (TangoMe, Palo Alto, CA). Each client was tested over a Wi-Fi network as well as cellular third generation (3G) (Skype and Tango). All three VoIP clients provided acceptable image and audio quality. There is a significant data lag in image transmission and quality when VoIP clients are used over cellular broadband (3G) compared with Wi-Fi. Portable remote telemedicine guidance is possible with newer technology devices such as a smartphone or tablet, as well as VoIP clients used over Wi-Fi or cellular broadband.

  8. Efficient Integrated Circuits for Wideband Wireless Transceivers

    OpenAIRE

    Duong, Quoc-Tai

    2016-01-01

    The proliferation of portable communication devices combined with the relentless demand for higher data rates has spurred the development of wireless communication standards which can support wide signal bandwidths. Benefits of the complementary metal oxide semiconductor (CMOS) process such as high device speeds and low manufacturing cost have rendered it the technology of choice for implementing wideband wireless transceiver integrated circuits (ICs). This dissertation addresses the key chal...

  9. Fundamental Limits in Wireless Wideband Networking

    OpenAIRE

    Do, Tan Tai

    2015-01-01

    The rapid growth of the wireless communication industry recently does not only bring opportunities but also challenges on developing radio technologies and solutions that can support high data rate as well as reliable and efficient communications. Two fundamental factors that limit the transmission rate are the available transmit energy and the available bandwidth. In this thesis, we investigate fundamental limits on energy and bandwidth efficiencies in wireless wideband networking. The frame...

  10. Advanced Life Support Technologies and Scenarios

    Science.gov (United States)

    Barta, Daniel J.

    2011-01-01

    As NASA looks beyond the International Space Station toward long-duration, deep space missions away from Earth, the current practice of supplying consumables and spares will not be practical nor affordable. New approaches are sought for life support and habitation systems that will reduce dependency on Earth and increase mission sustainability. To reduce launch mass, further closure of Environmental Control and Life Support Systems (ECLSS) beyond the current capability of the ISS will be required. Areas of particular interest include achieving higher degrees of recycling within Atmosphere Revitalization, Water Recovery and Waste Management Systems. NASA is currently investigating advanced carbon dioxide reduction processes that surpass the level of oxygen recovery available from the Sabatier Carbon Dioxide Reduction Assembly (CRA) on the ISS. Improving the efficiency of the recovery of water from spacecraft solid and liquid wastes is possible through use of emerging technologies such as the heat melt compactor and brine dewatering systems. Another significant consumable is that of food. Food production systems based on higher plants may not only contribute significantly to the diet, but also contribute to atmosphere revitalization, water purification and waste utilization. Bioreactors may be potentially utilized for wastewater and solid waste management. The level at which bioregenerative technologies are utilized will depend on their comparative requirements for spacecraft resources including mass, power, volume, heat rejection, crew time and reliability. Planetary protection requirements will need to be considered for missions to other solar system bodies.

  11. Adaptive Wireless Transceiver Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wireless technologies are an increasingly attractive means for spatial data, input, manipulation, and distribution. Mobitrum is proposing an innovative Adaptive...

  12. Wireless mobile Internet security

    CERN Document Server

    Rhee, Man Young

    2013-01-01

      The mobile industry for wireless cellular services has grown at a rapid pace over the past decade. Similarly, Internet service technology has also made dramatic growth through the World Wide Web with a wire line infrastructure. Realization for complete wired/wireless mobile Internet technologies will become the future objectives for convergence of these technologies thr

  13. A Wireless Electronic Nose System Using a Fe2O3 Gas Sensing Array and Least Squares Support Vector Regression

    Directory of Open Access Journals (Sweden)

    Yingguo Cheng

    2011-01-01

    Full Text Available This paper describes the design and implementation of a wireless electronic nose (WEN system which can online detect the combustible gases methane and hydrogen (CH4/H2 and estimate their concentrations, either singly or in mixtures. The system is composed of two wireless sensor nodes—a slave node and a master node. The former comprises a Fe2O3 gas sensing array for the combustible gas detection, a digital signal processor (DSP system for real-time sampling and processing the sensor array data and a wireless transceiver unit (WTU by which the detection results can be transmitted to the master node connected with a computer. A type of Fe2O3 gas sensor insensitive to humidity is developed for resistance to environmental influences. A threshold-based least square support vector regression (LS-SVR estimator is implemented on a DSP for classification and concentration measurements. Experimental results confirm that LS-SVR produces higher accuracy compared with artificial neural networks (ANNs and a faster convergence rate than the standard support vector regression (SVR. The designed WEN system effectively achieves gas mixture analysis in a real-time process.

  14. A wireless electronic nose system using a Fe2O3 gas sensing array and least squares support vector regression.

    Science.gov (United States)

    Song, Kai; Wang, Qi; Liu, Qi; Zhang, Hongquan; Cheng, Yingguo

    2011-01-01

    This paper describes the design and implementation of a wireless electronic nose (WEN) system which can online detect the combustible gases methane and hydrogen (CH(4)/H(2)) and estimate their concentrations, either singly or in mixtures. The system is composed of two wireless sensor nodes--a slave node and a master node. The former comprises a Fe(2)O(3) gas sensing array for the combustible gas detection, a digital signal processor (DSP) system for real-time sampling and processing the sensor array data and a wireless transceiver unit (WTU) by which the detection results can be transmitted to the master node connected with a computer. A type of Fe(2)O(3) gas sensor insensitive to humidity is developed for resistance to environmental influences. A threshold-based least square support vector regression (LS-SVR)estimator is implemented on a DSP for classification and concentration measurements. Experimental results confirm that LS-SVR produces higher accuracy compared with artificial neural networks (ANNs) and a faster convergence rate than the standard support vector regression (SVR). The designed WEN system effectively achieves gas mixture analysis in a real-time process.

  15. Ubiquitous Emergency Medical Service System Based on Wireless Biosensors, Traffic Information, and Wireless Communication Technologies: Development and Evaluation

    Directory of Open Access Journals (Sweden)

    Tan-Hsu Tan

    2017-01-01

    Full Text Available This study presents a new ubiquitous emergency medical service system (UEMS that consists of a ubiquitous tele-diagnosis interface and a traffic guiding subsystem. The UEMS addresses unresolved issues of emergency medical services by managing the sensor wires for eliminating inconvenience for both patients and paramedics in an ambulance, providing ubiquitous accessibility of patients’ biosignals in remote areas where the ambulance cannot arrive directly, and offering availability of real-time traffic information which can make the ambulance reach the destination within the shortest time. In the proposed system, patient’s biosignals and real-time video, acquired by wireless biosensors and a webcam, can be simultaneously transmitted to an emergency room for pre-hospital treatment via WiMax/3.5 G networks. Performances of WiMax and 3.5 G, in terms of initialization time, data rate, and average end-to-end delay are evaluated and compared. A driver can choose the route of the shortest time among the suggested routes by Google Maps after inspecting the current traffic conditions based on real-time CCTV camera streams and traffic information. The destination address can be inputted vocally for easiness and safety in driving. A series of field test results validates the feasibility of the proposed system for application in real-life scenarios.

  16. Ubiquitous Emergency Medical Service System Based on Wireless Biosensors, Traffic Information, and Wireless Communication Technologies: Development and Evaluation.

    Science.gov (United States)

    Tan, Tan-Hsu; Gochoo, Munkhjargal; Chen, Yung-Fu; Hu, Jin-Jia; Chiang, John Y; Chang, Ching-Su; Lee, Ming-Huei; Hsu, Yung-Nian; Hsu, Jiin-Chyr

    2017-01-21

    This study presents a new ubiquitous emergency medical service system (UEMS) that consists of a ubiquitous tele-diagnosis interface and a traffic guiding subsystem. The UEMS addresses unresolved issues of emergency medical services by managing the sensor wires for eliminating inconvenience for both patients and paramedics in an ambulance, providing ubiquitous accessibility of patients' biosignals in remote areas where the ambulance cannot arrive directly, and offering availability of real-time traffic information which can make the ambulance reach the destination within the shortest time. In the proposed system, patient's biosignals and real-time video, acquired by wireless biosensors and a webcam, can be simultaneously transmitted to an emergency room for pre-hospital treatment via WiMax/3.5 G networks. Performances of WiMax and 3.5 G, in terms of initialization time, data rate, and average end-to-end delay are evaluated and compared. A driver can choose the route of the shortest time among the suggested routes by Google Maps after inspecting the current traffic conditions based on real-time CCTV camera streams and traffic information. The destination address can be inputted vocally for easiness and safety in driving. A series of field test results validates the feasibility of the proposed system for application in real-life scenarios.

  17. Energy-Efficient Power Control: A Look at 5G Wireless Technologies

    Science.gov (United States)

    Zappone, Alessio; Sanguinetti, Luca; Bacci, Giacomo; Jorswieck, Eduard; Debbah, Merouane

    2016-04-01

    This work develops power control algorithms for energy efficiency (EE) maximization (measured in bit/Joule) in wireless networks. Unlike previous related works, minimum-rate constraints are imposed and the signal-to-interference-plus-noise ratio takes a more general expression, which allows one to encompass some of the most promising 5G candidate technologies. Both network-centric and user-centric EE maximizations are considered. In the network-centric scenario, the maximization of the global EE and the minimum EE of the network are performed. Unlike previous contributions, we develop centralized algorithms that are guaranteed to converge, with affordable computational complexity, to a Karush-Kuhn-Tucker point of the considered non-convex optimization problems. Moreover, closed-form feasibility conditions are derived. In the user-centric scenario, game theory is used to study the equilibria of the network and to derive convergent power control algorithms, which can be implemented in a fully decentralized fashion. Both scenarios above are studied under the assumption that single or multiple resource blocks are employed for data transmission. Numerical results assess the performance of the proposed solutions, analyzing the impact of minimum-rate constraints, and comparing the network-centric and user-centric approaches.

  18. Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology

    Science.gov (United States)

    Gomez, Carles; Oller, Joaquim; Paradells, Josep

    2012-01-01

    Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 μs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.

  19. Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology

    Directory of Open Access Journals (Sweden)

    Josep Paradells

    2012-08-01

    Full Text Available Bluetooth Low Energy (BLE is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 µs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.

  20. Revenue-Maximizing Radio Access Technology Selection with Net Neutrality Compliance in Heterogeneous Wireless Networks

    Directory of Open Access Journals (Sweden)

    Elissar Khloussy

    2018-01-01

    Full Text Available The net neutrality principle states that users should have equal access to all Internet content and that Internet Service Providers (ISPs should not practice differentiated treatment on any of the Internet traffic. While net neutrality aims to restrain any kind of discrimination, it also grants exemption to a certain category of traffic known as specialized services (SS, by allowing the ISP to dedicate part of the resources for the latter. In this work, we consider a heterogeneous LTE/WiFi wireless network and we investigate revenue-maximizing Radio Access Technology (RAT selection strategies that are net neutrality-compliant, with exemption granted to SS traffic. Our objective is to find out how the bandwidth reservation for SS traffic would be made in a way that allows maximizing the revenue while being in compliance with net neutrality and how the choice of the ratio of reserved bandwidth would affect the revenue. The results show that reserving bandwidth for SS traffic in one RAT (LTE can achieve higher revenue. On the other hand, when the capacity is reserved across both LTE and WiFi, higher social benefit in terms of number of admitted users can be realized, as well as lower blocking probability for the Internet access traffic.

  1. Technological Support for Logistics Transportation Systems

    Science.gov (United States)

    Bujak, Andrzej; Śliwa, Zdzisław; Gębczyńska, Alicja

    The modern world is changing introducing robots, remotely controlled vehicles and other crewless means of transportation to reduce people's mistakes, as the main cause of incidents and crashes during traffic. New technologies are supporting operators and drivers, and according to some studies they can even replace them. Such programs as: AHS, UAH, IVBSS or MTVR are under development to improve traffic flow and its safety, to reduce traffic hazards and crashes. It is necessary to analyze such concepts and implement them boldly, including Polish logistics' companies, new programs, highways' system etc., as they will be applied in the future, so it is necessary to prepare logistics infrastructure ahead of time in order to capitalize on these improvements. The problem is quite urgent as transportation in the country must not be outdated to meet clients' expectations and to keep pace with competing foreign companies.

  2. Fiber-wireless links supporting high-capacity W-band channels

    DEFF Research Database (Denmark)

    Vegas Olmos, Juan José; Tafur Monroy, Idelfonso

    2013-01-01

    Seamless convergence of fiber-optic and the wireless networks is of great interest for enabling transparent delivery of broadband services to users in different locations, including both metropolitan and rural areas. Current demand of bandwidth by end-users, especially using mobile devices......, is seeding the need to use bands located at the millimeter-wave region (30-300 GHz), mainly because of its inherent broadband nature. In our lab, we have conducted extensive research on high-speed photonic-wireless links in the V-band (50-75GHz) and the W-band (75-110GHz). In this paper, we will present our...

  3. Multiple access protocol for supporting multimedia services in wireless ATM networks

    DEFF Research Database (Denmark)

    Liu, Hong; Dittmann, Lars; Gliese, Ulrik Bo

    1999-01-01

    The furture broadband wireless asynchronous transfer mode (ATM) networks must provide seamless extension of multimedia services from the wireline ATM networks. This requires an effecient wireless access protocol to fulfill varying Quality-og-Service (QoS) requirements for multimedia applications....... In this paper, we propose a multiple access protocol using centralized and distributed channel access control techniques to provide QoS guarantees for multimedia services by taking advantage of the characteristics of different kinds of ATM traffics. Multimedia traffic, including constant bit rate (CBR...

  4. An Energy Efficient Adaptive Wireless Link for Farms based on IoT technologies

    DEFF Research Database (Denmark)

    Blaszczyk, Tomasz; Lynggaard, P.

    2015-01-01

    There is a huge demand for automation infrastructures that increase the efficiency and the commercial potential for the agricultural sector. One approach to achieve these objectives is deploying Internet of Things including its embedded wireless sensor network platform. However, deploying wireless...... sensors in the fields far from the farms provide some challenges in terms of transmit power, path loss, and lack of power. This paper explores the possibility to deploy an efficient low power adaptable wireless link which interfaces the Internet of Things infrastructure located on the farm. This new...

  5. Security for multihop wireless networks

    CERN Document Server

    Khan, Shafiullah

    2014-01-01

    Security for Multihop Wireless Networks provides broad coverage of the security issues facing multihop wireless networks. Presenting the work of a different group of expert contributors in each chapter, it explores security in mobile ad hoc networks, wireless sensor networks, wireless mesh networks, and personal area networks.Detailing technologies and processes that can help you secure your wireless networks, the book covers cryptographic coprocessors, encryption, authentication, key management, attacks and countermeasures, secure routing, secure medium access control, intrusion detection, ep

  6. Value of wireless personal digital assistants for practice: perceptions of advanced practice nurses.

    Science.gov (United States)

    Garrett, Bernard; Klein, Gerri

    2008-08-01

    The aims were to explore advanced practice nurses' perceptions on wireless Personal Digital Assistant technologies, to establish the type and range of tools that would be useful to support their practice and to identify any requirements and limitations that may impact the implementation of wireless Personal Digital Assistants in practice. The wireless Personal Digital Assistant is becoming established as a hand-held computing tool for healthcare professionals. The reflections of advanced practice nurses' about the value of wireless Personal Digital Assistants and its potential to contribute to improved patient care has not been investigated. A qualitative interpretivist design was used to explore advanced practice nurses' perceptions on the value of wireless Personal Digital Assistant technologies to support their practice. The data were collected using survey questionnaires and individual and focus group interviews with nurse practitioners, clinical nurse specialists and information technology managers based in British Columbia, Canada. An open-coding content analysis was performed using qualitative data analysis software. Wireless Personal Digital Assistant's use supports the principles of pervasivity and is a technology rapidly being adopted by advanced practice nurses. Some nurses indicated a reluctance to integrate wireless Personal Digital Assistant technologies into their practices because of the cost and the short technological life cycle of these devices. Many of the barriers which precluded the use of wireless networks within facilities are being removed. Nurses demonstrated a complex understanding of wireless Personal Digital Assistant technologies and gave good rationales for its integration in their practice. Nurses identified improved client care as the major benefit of this technology in practice and the type and range of tools they identified included clinical reference tools such as drug and diagnostic/laboratory reference applications and wireless

  7. Supporting Dynamic Adaptive Streaming over HTTP in Wireless Meshed Networks using Random Linear Network Coding

    DEFF Research Database (Denmark)

    Hundebøll, Martin; Pedersen, Morten Videbæk; Roetter, Daniel Enrique Lucani

    2014-01-01

    This work studies the potential and impact of the FRANC network coding protocol for delivering high quality Dynamic Adaptive Streaming over HTTP (DASH) in wireless networks. Although DASH aims to tailor the video quality rate based on the available throughput to the destination, it relies...

  8. Test System for Node Efficiency of Progressive Cavity Pump Based on Wireless Communication Technology

    National Research Council Canada - National Science Library

    Tingjun Yan; Haoqiang Ti; Xianmin Wu

    2013-01-01

      In order to acquire the data of the energy consumption and operation efficiency of progressive cavity pump wells, a new test system for node efficiency of progressive cavity pump based on wireless...

  9. Deploying 5G-technologies in smart city and smart home wireless sensor networks with interferences

    DEFF Research Database (Denmark)

    Lynggaard, Per; Skouby, Knud Erik

    2015-01-01

    interconnected infrastructure elements, to handle big-data from the smart homes, and to be compatible with existing infrastructures. The considered cognitive radio technology is based on pre-coded OFDM which offers the needed flexibility to deal with the key challenges found in the smart home networks. Thus......Deploying 5G technologies in a combination of smart homes and smart city opens for a new ecosystem with big potentials. The potentials lie in the creation of an advanced ICT infrastructure with support for connected and entangled services possibilities including technologies for efficient...

  10. The Use of SMS Support in Programming Education

    Science.gov (United States)

    Kert, Serhat Bahadir

    2011-01-01

    The rapid developments in the communication technologies today render possible the use of new technological support tools in learning processes. Wireless, or mobile wireless, technologies are the tools whose potential contributions to education are investigated. The potential effects of these technologies on learning are explored through studies…

  11. INFORMATION TECHNOLOGIES IN INSURANCE SALES SUPPORT

    Directory of Open Access Journals (Sweden)

    Stofor Ovidiu-Ilie

    2012-07-01

    Full Text Available Insurance system in Romania is carried out with a constant natural activity, evolving quite honorably these times. This is largely due to the difficulty with which insurance is sold in normal economic conditions when it comes to prosperity. Although psychologists, led by Maslow believes that the protection needs are basic needs, along with the physiological one, on the priority list regarding procurement, insurance needs are for some Romanians, of minimum or no importance, so that they are either pushed to the bottom of the list, or even, as it most often happens, they are non existent. Current economic conditions and climate, urges caution on most fields, especially in terms of individual properties, including, how somewhat forced, life and physical integrity which are still considered property, if this aspect is not debated in terms of Christian or other religious dogma. In other words, many Romanians see insurance as a product that “is not up their alley” including it in the luxury category. Furthermore, the media shows, sometimes amplify certain cases of doubt in relations between insurance company - customer. Appropriate marketing, allied with the information technology can improve the complete relationship between the two entities - the offeror and the consumer. Through this study we aim to identify important issues that facilitate the sale of insurance, using information technology, given that the sales of these financial products through the "ancestral" methods are effective but not very efficient. We will follow, byanchoring to the current reality, the insurance utility and how to use information technologies in support of marketing (sales. The study itself was done by observing the results in practical work, from an insurance agency, but also related to what the literature offers. Because this study is currently underway, there are certainly some limitations of accuracy of results, which are adjusted "on the fly". Realizing

  12. Deployed Virtual Consulting: The Fusion of Wearable Computing, Collaborative Technology, Augmented Reality and Intelligent Agents to Support Fleet Aviation Maintenance

    National Research Council Canada - National Science Library

    Nasman, James

    2004-01-01

    .... By implementing wireless technology in combination with advanced software allowing the virtual collaboration of parties widely separated by geographical distance the Navy can establish a "virUal...

  13. A New MAC Protocol with Pseudo-TDMA Behavior for Supporting Quality of Service in 802.11 Wireless LANs

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available A new medium access control (MAC protocol is proposed for quality-of-service (QoS support in wireless local area networks (WLAN. The protocol is an alternative to the recent enhancement 802.11e. A new priority policy provides the system with better performance by simulating time division multiple access (TDMA functionality. Collisions are reduced and starvation of low-priority classes is prevented by a distributed admission control algorithm. The model performance is found analytically extending previous work on this matter. The results show that a better organization of resources is achieved through this scheme. Throughput analysis is verified with OPNET simulations.

  14. Supporting teachers' technology integration in lesson plans

    NARCIS (Netherlands)

    Janssen, Noortje

    2017-01-01

    Lesson planning offers rich opportunities for teachers to consider and implement technology in the classroom. This dissertation investigated the design and effectiveness of supplementary information to assist pre-service teachers during the lesson planning process. Based on the Technological,

  15. Optimization Modeling and Decision Support for Wireless Infrastructure Deployment in Disaster Planning and Management

    DEFF Research Database (Denmark)

    Bartolacci, Michael R.; Mihovska, Albena D.; Ozceylan, Dilek

    2013-01-01

    Natural disasters and emergencies create the need for communication between and among the affected populace and emergency responders as well as other parties such as governmental agencies and aid organizations. Such communications include the dissemination of key information such as evacuation...... the deployment of temporary mobile networks and other wireless equipment following disasters has been successfully accomplished by governmental agencies and network providers following previous disasters, there appears to be little optimization effort involved with respect to maximizing key performance measures...... of the deployment or minimizing overall cost to deploy. This work does not focus on the question of what entity will operate the portable base stations or wireless equipment utilized during a disaster, only the question of optimizing placement for planning and real time management purposes. This work examines...

  16. Wireless vital signs from a life-supporting medical device exposed to electromagnetic disturbance.

    Science.gov (United States)

    Øyri, Karl; Chávez-Santiago, Raúl; Støa, Stig; Martinsen, Ørjan Grøttem; Balasingham, Ilangko; Fosse, Erik

    2014-12-01

    To evaluate the level of agreement of simulated wired and Wi-Fi vital signs output from an intra-aortic balloon pump during exposure to electromagnetic interference from frequency overlapping ZigBee sensors. A series of experiments with interference from single and multiple ZigBee sensors were benchmarked with wired and Wi-Fi output. Tests included single ZigBee sensor adjacent and co-channel interference, and multiple ZigBee interferences towards the Wi-Fi receiver and transmitter. Interference-free differences between wired and wireless aortic blood pressure and electrocardiogram were very small, verified by time domain and Bland - Altman plots. Bland - Altman plots comparing level of agreement in wired and wireless aortic blood pressure and ECG output during interference experiments showed a difference from 0.2 to 0.3 mmHg for blood pressure, and from 0.001 to 0.004 mV for electrocardiogram. Level of agreement in wired and wireless (Wi-Fi) arterial blood pressure and electrocardiogram during single or multiple sensor interference was high. No clinically relevant degradation of Wi-Fi transmission of aortic blood pressure or ECG signals was observed.

  17. Acceptability Among Community Healthcare Nurses of Intelligent Wireless Sensor-system Technology for the Rapid Detection of Health Issues in Home-dwelling Older Adults.

    Science.gov (United States)

    Cohen, Christine; Kampel, Thomas; Verloo, Henk

    2017-01-01

    The effective care and support of community healthcare nurses (CHNs) contribute greatly to the healthy aging of older adults living at home. Integrating innovative technologies into CHNs' daily practice offers new opportunities and perspectives for early detection of health issues and interventions among home-dwelling older adults. To explore the perception of acceptability among CHNs of an intelligent wireless sensor system (IWSS) for use in daily practice for the detection of health issues in home-dwelling older adults receiving home healthcare. Descriptive and qualitative data were sourced from a pilot randomized controlled trial involving 17 CHNs using an IWSS in their daily practice to rapidly detect falls and other health issues in patients' homes. IWSS alerts indicating behavior changes were sent to CHNs. Their perceived usefulness (PU) and perceived ease of use (PEOU) were assessed. The acceptability of IWSS technology was explored using a questionnaire and focus group discussions. The PU and PEOU of the IWSS technology were low to moderate. A majority of the CHNs were dissatisfied with its performance and intrusiveness; they reported multiple obstacles in the usefulness and ease of use of the IWSS technology in daily practice. To improve the IWSS technology's low to moderate acceptability among CHNs, we recommend a more user-centered implementation strategy and an embedded model of nursing care.

  18. A Lunar Surface System Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

    2011-01-01

    This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set

  19. Using Wireless Sensor Networks to Achieve Intelligent Monitoring for High-Temperature Gas-Cooled Reactor

    Directory of Open Access Journals (Sweden)

    Jianghai Li

    2017-01-01

    Full Text Available High-temperature gas-cooled reactors (HTGR can incorporate wireless sensor network (WSN technology to improve safety and economic competitiveness. WSN has great potential in monitoring the equipment and processes within nuclear power plants (NPPs. This technology not only reduces the cost of regular monitoring but also enables intelligent monitoring. In intelligent monitoring, large sets of heterogeneous data collected by the WSN can be used to optimize the operation and maintenance of the HTGR. In this paper, WSN-based intelligent monitoring schemes that are specific for applications of HTGR are proposed. Three major concerns regarding wireless technology in HTGR are addressed: wireless devices interference, cybersecurity of wireless networks, and wireless standards selected for wireless platform. To process nonlinear and non-Gaussian data obtained by WSN for fault diagnosis, novel algorithms combining Kernel Entropy Component Analysis (KECA and support vector machine (SVM are developed.

  20. GIS management system of power plant staff based on wireless fidelity indoor location technology

    Science.gov (United States)

    Zhang, Ting

    2017-05-01

    The labor conditions and environment of electric power production are quite complicated. It is very difficult to realize the real-time supervision of the employees' working conditions and safety. Using the existing base stations in the power plant, the wireless fidelity network is established to realize the wireless coverage of the work site. We can use mobile phone to communicate and achieve positioning. The main content of this project is based on the special environment of the power plant, designed a suitable for ordinary Android mobile phone indoor wireless fidelity positioning system, real-time positioning and record the scene of each employee's movement trajectory, has achieved real-time staff check Gang, Staff in place, and for the safety of employees to provide a guarantee.

  1. Field-trial demonstration of an extended-reach GPON-supporting 60-GHz indoor wireless access

    Science.gov (United States)

    Giannoulis, G.; Moraitis, N.; Argyris, N.; Dris, S.; Lessi, C.; Perdikouris, S.; Kostikidou, L.; Apostolopoulos, D.; Spatharakis, C.; Papafili, I.; Agapiou, G.; Panagopoulos, A. D.; Avramopoulos, H.

    2017-02-01

    The 5G era is nearly upon us, and poses several challenges for system designers; one important question is how the (soon to be standardized) mmWave bands of wireless mobile access can coexist harmoniously with optical links in fixed telecom networks. To this end, we present a Radio-over-Fiber (RoF) backhauling concept, interfaced to a 60-GHz indoor femto-cell via a field-installed optical fiber link. We successfully demonstrate generation of a RoF signal up to 1 Gb/s and transmit it optically over 43 km of deployed Single Mode Fiber (SMF), as well as investigate the performance of the 60-GHz access link as a function of distance. The optical link introduces negligible degradation, contrasting the effect of multipath fading in the 60-GHz wireless channel; the latter requires adaptive equalization using offline DSP. The proposed scheme is further validated by demonstration of a 60-GHz Remote Antenna Unit (RAU) concept, handling real traffic from commercial Gigabit Passive Optical Network (GPON) equipment. Proper RAU operation at 1.25 Gb/s is achieved, accommodating true data packets from a Media Converter emitting at 1310 nm through an in-building fiber link. System performance is confirmed through Bit Error Rate (BER) and Error Vector Magnitude (EVM) measurements. EVMs of 11 and 19% are achieved with BPSK signals, for distances of 1 and 2 m respectively. As standardization of mmWave technologies moves from 5G testbeds to field-trial prototypes, successful demonstration of such 60-GHz wireless access scenarios over a telecom operator's commercial fiber infrastructure is even more relevant.

  2. Optimization of mobile IPv6-based handovers to support VoIP services in wireless heterogeneous networks

    DEFF Research Database (Denmark)

    Fathi, Hanane; Chakraborty, Shyam; Prasad, Ramjee

    2007-01-01

    The support of the voice over Internet Protocol (VoIP) services in next-generation wireless systems requires the coupling of mobility with quality of service. The mobile node can experience disruptions or even intermittent disconnections of an ongoing real-time session due to handovers. The durat......The support of the voice over Internet Protocol (VoIP) services in next-generation wireless systems requires the coupling of mobility with quality of service. The mobile node can experience disruptions or even intermittent disconnections of an ongoing real-time session due to handovers....... The duration of such interruptions is called disruption time or handover delay and can heavily affect user satisfaction. Therefore, this delay needs to be minimized to provide good-quality VoIP services. In this paper, the focus is on the network layer mobility, specifically on dates for providing mobility...... at layer 3. Using analytical models, the authors evaluate MIPv4, MIPv6, fast MIPv6 (FMIPv6), and hierarchical MIPv6 (HMIPv6) and compare their performances in terms of handover delay for VoIP services. To optimize the handover delay, the authors propose to use the adaptive retransmission timer described...

  3. The Wireless ATM Architecture

    Directory of Open Access Journals (Sweden)

    R. Palitefka

    1998-06-01

    Full Text Available An overview of the proposed wireless ATM structure is provided. Wireless communication have been developed to a level where offered services can now be extended beyond voice and data. There are already wireless LANs, cordless systems offering data services and mobile data. Wireless LAN systems are basically planned for local, on-promises and in-house networking providing short distance radio or infrared links between computer system. The main challenge of wireless ATM is to harmonise the development of broadband wireless system with service B -ISDN/ATM and ATM LANs, and offer multimedia multiservice features for the support of time-sensitive voice communication, video, desktop multimedia applications, and LAN data traffic for the wireless user.

  4. Center for Global Health announces grants to support portable technologies

    Science.gov (United States)

    NCI's Center for Global Health announced grants that will support the development and validation of low-cost, portable technologies. These technologies have the potential to improve early detection, diagnosis, and non-invasive or minimally invasive treatm

  5. Decision support for redesigning wastewater treatment technologies.

    Science.gov (United States)

    McConville, Jennifer R; Künzle, Rahel; Messmer, Ulrike; Udert, Kai M; Larsen, Tove A

    2014-10-21

    This paper offers a methodology for structuring the design space for innovative process engineering technology development. The methodology is exemplified in the evaluation of a wide variety of treatment technologies for source-separated domestic wastewater within the scope of the Reinvent the Toilet Challenge. It offers a methodology for narrowing down the decision-making field based on a strict interpretation of treatment objectives for undiluted urine and dry feces and macroenvironmental factors (STEEPLED analysis) which influence decision criteria. Such an evaluation identifies promising paths for technology development such as focusing on space-saving processes or the need for more innovation in low-cost, energy-efficient urine treatment methods. Critical macroenvironmental factors, such as housing density, transportation infrastructure, and climate conditions were found to affect technology decisions regarding reactor volume, weight of outputs, energy consumption, atmospheric emissions, investment cost, and net revenue. The analysis also identified a number of qualitative factors that should be carefully weighed when pursuing technology development; such as availability of O&M resources, health and safety goals, and other ethical issues. Use of this methodology allows for coevolution of innovative technology within context constraints; however, for full-scale technology choices in the field, only very mature technologies can be evaluated.

  6. Brain-Based Learning With Technological Support

    Science.gov (United States)

    Miller, Anita

    2004-01-01

    Utilization of technology in secondary schools is varied and depends on the training and interest of the individual instructors. Even though technology has advanced way beyond its utilitarian roots of being viewed solely by educators as a useful machine for teachers to key exams and worksheets on, there are still many secondary educators who still…

  7. Person-centred technology-supported interventions.

    NARCIS (Netherlands)

    Dulmen, S. van; Brembo, E.; Dugstad, J.; Eide, H.

    2017-01-01

    In this paragraph about lessons learned we look back at the three questions that guided this chapter: 1. How can technology uplift today’s healthcare services? Clearly, technology can facilitate healthcare services in different ways. It can lighten the often‐heavy burden of healthcare professionals’

  8. A Real-Time Construction Safety Monitoring System for Hazardous Gas Integrating Wireless Sensor Network and Building Information Modeling Technologies.

    Science.gov (United States)

    Cheung, Weng-Fong; Lin, Tzu-Hsuan; Lin, Yu-Cheng

    2018-02-02

    In recent years, many studies have focused on the application of advanced technology as a way to improve management of construction safety management. A Wireless Sensor Network (WSN), one of the key technologies in Internet of Things (IoT) development, enables objects and devices to sense and communicate environmental conditions; Building Information Modeling (BIM), a revolutionary technology in construction, integrates database and geometry into a digital model which provides a visualized way in all construction lifecycle management. This paper integrates BIM and WSN into a unique system which enables the construction site to visually monitor the safety status via a spatial, colored interface and remove any hazardous gas automatically. Many wireless sensor nodes were placed on an underground construction site and to collect hazardous gas level and environmental condition (temperature and humidity) data, and in any region where an abnormal status is detected, the BIM model will alert the region and an alarm and ventilator on site will start automatically for warning and removing the hazard. The proposed system can greatly enhance the efficiency in construction safety management and provide an important reference information in rescue tasks. Finally, a case study demonstrates the applicability of the proposed system and the practical benefits, limitations, conclusions, and suggestions are summarized for further applications.

  9. Natural gas and oil technology partnership support

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, T.W.

    1996-06-01

    The Natural Gas and Oil Technology Partnership expedites development and transfer of advanced technologies through technical interactions and collaborations between the national laboratories and the petroleum industry - majors, independents, service companies, and universities. The Partnership combines the expertise, equipment, facilities, and technologies of the Department of Energy`s national laboratories with those of the US petroleum industry. The laboratories utilize unique capabilities developed through energy and defense R&D including electronics, instrumentation, materials, computer hardware and software, engineering, systems analysis, physics, and expert systems. Industry contributes specialized knowledge and resources and prioritizes Partnership activities.

  10. A self-supporting wireless IoT node that uses kinetic energy harvesting

    DEFF Research Database (Denmark)

    Lynggaard, Per

    2017-01-01

    The Internet-of-Things (IoT) is expected to be the next revolution of the internet where trillions of IoT nodes will be deployed on a global scale. It is foreseen that a considerable part of these will be deployed in smart buildings and smart homes where they will provide innovative solutions......, products, and services. However, this vision contains one major challenge in terms of providing energy to the wireless part of the IoT nodes. This paper proposes a specific solution in form of harvesting energy from a vibrating cantilever beam that has been set into vibration by some user activity...

  11. Wireless Sensor Network for Helicopter Rotor Blade Vibration Monitoring: Requirements Definition and Technological Aspects

    NARCIS (Netherlands)

    Sanchez Ramirez, Andrea; Das, Kallol; Loendersloot, Richard; Tinga, Tiedo; Havinga, Paul J.M.; Basu, Biswajit

    The main rotor accounts for the largest vibration source for a helicopter fuselage and its components. However, accurate blade monitoring has been limited due to the practical restrictions on instrumenting rotating blades. The use of Wireless Sensor Networks (WSNs) for real time vibration monitoring

  12. Electromagnetic Fields, Pulsed Radiofrequency Radiation, and Epigenetics: How Wireless Technologies May Affect Childhood Development

    Science.gov (United States)

    Sage, Cindy; Burgio, Ernesto

    2018-01-01

    Mobile phones and other wireless devices that produce electromagnetic fields (EMF) and pulsed radiofrequency radiation (RFR) are widely documented to cause potentially harmful health impacts that can be detrimental to young people. New epigenetic studies are profiled in this review to account for some neurodevelopmental and neurobehavioral changes…

  13. The Impact of Wireless Technology on Order Selection Audits at an Auto Parts Distribution Center

    Science.gov (United States)

    Goomas, David T.

    2012-01-01

    Audits of store order pallets or totes performed by auditors at five distribution centers (two experimental and three comparison distribution centers) were used to check for picking accuracy prior to being loaded onto a truck for store delivery. Replacing the paper audits with wireless handheld computers that included immediate auditory and visual…

  14. Biobjective Optimization of Radio Access Technology Selection and Resource Allocation in Heterogeneous Wireless Networks

    DEFF Research Database (Denmark)

    Zakrzewska, Anna; D’Andreagiovanni, Fabio; Ruepp, Sarah Renée

    2013-01-01

    We propose a novel optimization model for resource assignment in heterogeneous wireless network. The model adopts two objective functions maximizing the number of served users and the minimum granted utility at once. A distinctive feature of our new model is to consider two consecutive time slots...

  15. [Study on mobile phone based wireless ECG monitoring technology system realization and performance test].

    Science.gov (United States)

    Yu, Yang; Liu, Jing

    2010-11-01

    This paper introduces a novel mobile phone based wireless real-time ECG monitoring system. And experiments were conducted to demonstrate the reliability and stability of the device. This novel system not only addresses the contradiction between continuous monitoring and device cost, but also represents advanced concepts of low cost medicine and personal health management.

  16. The Impact of Wireless Technology Feedback on Inventory Management at a Dairy Manufacturing Plant

    Science.gov (United States)

    Goomas, David T.

    2012-01-01

    Replacing the method of counting inventory from paper count sheets to that of wireless reliably reduced the elapsed time to complete a daily inventory of the storage cooler in a dairy manufacturing plant. The handheld computers delivered immediate prompts as well as auditory and visual feedback. Reducing the time to complete the daily inventory…

  17. The Impact of Wireless Technology on Loading Trucks at an Auto Parts Distribution Center

    Science.gov (United States)

    Goomas, David T.

    2012-01-01

    An intervention was introduced for truck loaders that used wireless vehicle mount computers that included auditory, visual feedback, and immediate data delivery. The implementation reliably reduced pallets from being loaded out of sequence for all outbound trucks in multistop routes. The role of the organizational behavior management (OBM)…

  18. An Energy Efficient Adaptive Wireless Link for Farms based on IoT technologies

    DEFF Research Database (Denmark)

    Blaszczyk, Tomasz; Lynggaard, P.

    2015-01-01

    There is a huge demand for automation infrastructures that increase the efficiency and the commercial potential for the agricultural sector. One approach to achieve these objectives is deploying Internet of Things including its embedded wireless sensor network platform. However, deploying wireles...

  19. An Energy Efficient Adaptive Wireless Link for Farms based on IoT technologies

    DEFF Research Database (Denmark)

    Blaszczyk, tomasz; Lynggaard, Per

    2016-01-01

    There is a huge demand for automation infrastructures that increase the efficiency and the commercial potential for the agricultural sector. One approach to achieve these objectives is deploying Internet of Things including its embedded wireless sensor network platform. However, deploying wireles...

  20. Institutional Support : African Technology Policy Studies - Tanzania ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    wide ATPS. While resource flows to ... This grant from IDRC's Think Tank Initiative (TTI) will allow ATPS-Tanzania to revamp and scale up its contribution to Tanzania's science and technology policy. Specifically, the grant will enable ...

  1. Combating Terrorism Technology Support Office 2006 Review

    Science.gov (United States)

    2006-01-01

    on improving the kenneling environment, reducing stress, and other methods of promoting canine health. Requests for this manual from Federal, State...Engineering, Inc., Billerica Artisent, Inc., Boston Aspen Systems, Inc., Marlborough BBN Technologies, Cambridge Boston Dynamics, Cambridge Charles

  2. Supporting the industrialisation of aerospace technologies

    CSIR Research Space (South Africa)

    Botha, M

    2015-10-01

    Full Text Available Globally, the aerospace industry is recognised as one of the most significant multipliers for economic development. Aerospace requires a technology injection to enhance industrialisation. An example is the Rooivalk development programme, which...

  3. Support and Technology Transfer: Results and Accomplishments

    Science.gov (United States)

    2009-07-01

    concerns are addressed. The CAFT/ FMT Staff also maintains an extensive information database system for technology transfer that is accessible on...to assure that manufacturability concerns are addressed. The CAFT/ FMT Staff also maintains an extensive information database system for technology...19 12/15/08 No cost extension to June 30, 2009 3 Short Term Project Activities 3.1 Process Action Teams and Industry Forums CAFT/ FMT Staff

  4. Using networked technologies to support conferences

    OpenAIRE

    Kelly, B.; Tonkin, E.; Shabajee, P

    2005-01-01

    The increasing availability of WiFi networks in conference venues is an opportunity to provide additional services for conference delegates and to enhance and enrich the learning experience. This paper reviews experiences of use of networked applications in a conference environment and outlines a number of potentially useful technologies. The paper addresses potential concerns over use of networked technologies including dangers of disruption and distraction, legal and copyright issues as wel...

  5. Efficacy of Directional Microphones in Hearing Aids Equipped with Wireless Synchronization Technology.

    Science.gov (United States)

    Geetha, Chinnaraj; Tanniru, Kishore; Rajan, R Raja

    2017-04-01

    This study aimed to evaluate the use of directionality in hearing aids with wireless synchronization on localization and speech intelligibility in noise. This study included 25 individuals with bilateral mild to moderate flat sensorineural hearing loss. For the localization experiment, eight loudspeakers (Genelec 8020B) arranged in a circle covering a 0-360° angle and the Cubase 6 software were used for presenting the stimulus. A car horn of 260 ms was presented from these loudspeakers, one at a time, randomly. The listener was instructed to point to the direction of the source. The degree of the localization error was obtained with and without directionality and wireless synchronization options. For speech perception in a noise experiment, signal to noise ratio-50 (SNR-50) was obtained using sentences played through a speaker at a fixed angle of 0°. A calibrated eight-talker speech babble was used as noise and the babble was routed either through 0°, 90°, 270° (through one speaker at a time) or through both 90° and 270° speakers. The results revealed that the conditions where both the wireless synchronization and directionality were activated resulted in a significantly better performance in both localization and speech perception in noise tasks. It can be concluded that the directionality in the wireless synchronization hearing aids coordinates with each other binaurally for better preservation of binaural cues, thus reducing the localization errors and improving speech perception in noise. The results of this study could be used to counsel and justify the selection of the directional wireless synchronization hearing aids.

  6. Establishing a support service for educational technology within a university

    Directory of Open Access Journals (Sweden)

    J. A. Longstaffe

    1996-12-01

    Full Text Available Over the past decade it has become increasingly apparent that computer technology is extremely effective in the support of teaching and learning. It has also become obvious that without proselytization and support, the adoption of this new method of teaching is patchy and frequently inappropriate. The raising of awareness, the training of staff and the provision of informed advice and support are necessary to facilitate the appropriate development of technology-supported learning within an institution.

  7. Interdisciplinarity and Ubiquitous Internet Technologies in Support of Automation

    Directory of Open Access Journals (Sweden)

    Eduard Babulak Prof., Ph.D., P.Eng., Eur.Ing., C.Eng.,

    2006-02-01

    Full Text Available The Telecommunications and Internet Technologies have evolved dramatically during the last decade, laying solid foundation for the future generation of the Ubiquitous Internet access, omnipresent web technologies and ultimate automated information cyberspace. Recent technological advancements in the areas of global mobility, wireless technologies and miniaturization are driven by the economic and social prosperity. The current state of the art in Differentiated Networks, Health Informatics, Advanced Television, Sensor Networks, MIMO Systems, and recent experiments conducted in the Quantum and Bio Computing open a new horizon for the Future Technologies. As a result, the current efforts in the research and development in the areas of Next Generation of Internet and Telecommunications Technologies promotes formation of inter-disciplinary international teams of experts, scientists, researchers and engineers to create a new generation of applications and technologies that will facilitate the fully-automated information cyberspace systems, such as Future House 2015. The speed and omnipresent accessibility to Internet providing any information at any time from anywhere will create global very complex communications infrastructures. The increased number of Internet sites worldwide will ultimately generate large number of performance bottlenecks and technical faults that may put in danger essential resources for societies world-wide such as energy supplies, national security, financial integrity, transportation logistics and ultimately human safety. The author discusses the current state of the art in the world of Telecommunications and Internet Technologies, new technological trends directions in the Internet and Automation Industries, as well as the concept of the Fully-automated Future House 2015. The paper presents a survey of current developments and future directions in Telecommunications Industry and Automation while promoting research and

  8. Supporting indigenous women in science, technology, engineering ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    These programs, partly funded by Mexico's Consejo Nacional de Ciencia y Tecnologia (CONACYT) (National council of science and technology), have considerably improved the participation of indigenous people in the country's education system. However, there continue to be important challenges in advancement ...

  9. Myths about Technology-Supported Professional Learning

    Science.gov (United States)

    Killion, Joellen; Treacy, Barbara

    2014-01-01

    The future of professional learning is shaped by its present and past. As new technologies emerge to increase affordability, access, and appropriateness of professional learning, three beliefs are visible in current practices related to online learning. Each contains a premise that merits identification and examination. The authors call these…

  10. Using Technology to Support STEM Reading

    Science.gov (United States)

    Schneps, Matthew H.; O'Keeffe, Jamie K.; Heffner-Wong, Amanda; Sonnert, Gerhard

    2010-01-01

    Tasks in science, technology, engineering, and mathematics (STEM) are unusually varied because they target phenomena occurring in diverse domains and call upon a wide range of abilities to perform them. The fact that STEM tasks cover such a broad spectrum of abilities makes these fields uncharacteristically inclusive: Individuals with disabilities…

  11. Getting Your Counselor to Support Technology Education

    Science.gov (United States)

    Preble, Brian C.

    2016-01-01

    Is there a disconnect between counselors and educators in technology and vocational education? What is counseling, and what is a school counselor's role in a secondary school setting? How can one work with his or her guidance staff to ensure that students better understand your course offerings? The development of relationships, knowledge, and…

  12. Debate: Wired versus Wireless.

    Science.gov (United States)

    Meeks, Glenn; Nair, Prakash

    2000-01-01

    Debates the issue of investing in wiring schools for desktop computer networks versus using laptops and wireless networks. Included are cost considerations and the value of technology for learning. Suggestions include using wireless networks for existing schools, hardwiring computers for new construction, and not using computers for elementary…

  13. Wireless avionics for space applications of fundamental physics

    Science.gov (United States)

    Wang, Linna; Zeng, Guiming

    2016-07-01

    Fundamental physics (FP) research in space relies on a strong support of spacecraft. New types of spacecraft including reusable launch vehicles, reentry space vehicles, long-term on-orbit spacecraft or other new type of spacecraft will pave the way for FP missions. In order to test FP theories in space, flight conditions have to be controlled to a very high precision, data collection and handling abilities have to be improved, real-time and reliable communications in critical environments are needed. These challenge the existing avionics of spacecraft. Avionics consists of guidance, navigation & control, TT&C, the vehicle management, etc. Wireless avionics is one of the enabling technologies to address the challenges. Reasons are expatiated of why it is of great advantage. This paper analyses the demands for wireless avionics by reviewing the FP missions and on-board wireless systems worldwide. Main types of wireless communication are presented. Preliminary system structure of wireless avionics are given. The characteristics of wireless network protocols and wireless sensors are introduced. Key technologies and design considerations for wireless avionics in space applications are discussed.

  14. Technology-Supported Learning Environments in Science Classrooms in India

    Science.gov (United States)

    Gupta, Adit; Fisher, Darrell

    2012-01-01

    The adoption of technology has created a major impact in the field of education at all levels. Technology-supported classroom learning environments, involving modern information and communication technologies, are also entering the Indian educational system in general and the schools in Jammu region (Jammu & Kashmir State, India) in…

  15. Lifelong Learning and its support with new technologies

    NARCIS (Netherlands)

    Kalz, Marco

    2014-01-01

    This chapter provides an overview about the use of new technologies for lifelong learning. While in the past learning technologies were mostly provided by educational institutions to support a specific lifetime or shorter learning episodes nowadays more personal technologies are used for lifelong

  16. Risk analysis and technology assessment in support of technology development

    NARCIS (Netherlands)

    Wezel, van Annemarie P.; Lente, van Harro; Sandt, van de Johannes J.M.; Bouwmeester, Hans; Vandeberg, Rens L.J.; Sips, Adrienne J.A.M.

    2018-01-01

    Governments invest in “key enabling technologies,” such as nanotechnology, to solve societal challenges and boost the economy. At the same time, governmental agencies demand risk reduction to prohibit any often unknown adverse effects, and industrial parties demand smart approaches to reduce

  17. Grassroots Technological Resistance: The People's Power Project and the Impossible Dream of Wireless Transmission of Energy.

    Science.gov (United States)

    Schmidt, Pete

    2017-09-01

    In 1972, the Minnesota United Power Association (UPA) teamed up with the Minnesota Cooperative Power Association (CPA) to initiate an electrification project designed to bring power from North Dakota to the Twin Cities area. A significant backlash and protest began once farmers across the state became aware of the plan and the potential impending land seizure. In the midst of these actions, one group sought to create an alternative to the power line transmission system by designing a system of wireless energy transmission based on the plans of Nikola Tesla. This self-funded conglomeration of farmers and amateur researchers formed the People's Power Project (PPP) and set about building Tesla's system for the wireless transmission of energy. Using archival documents, this paper recounts this episode and argues that, in this case, the potential for successful grassroots action was derailed by the influence of longstanding myths about Tesla and his devices. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. What Can Wireless Cellular Technologies Do about the Upcoming Smart Metering Traffic?

    DEFF Research Database (Denmark)

    Nielsen, Jimmy Jessen; Madueño, Germán Corrales; Pratas, Nuno

    2015-01-01

    The introduction of smart electricity meters with cellular radio interface puts an additional load on the wireless cellular networks. Currently, these meters are designed for low duty cycle billing and occasional system check, which generates a low-rate sporadic traffic. As the number...... and higher rates per device. In this paper, we characterize the current traffic generated by smart electricity meters and supplement it with the potential traffic requirements brought by introducing enhanced Smart Meters, i.e., meters with PMU-like capabilities. Our study shows how GSM/GPRS and LTE cellular...... system performance behaves with the current and next generation smart meters traffic, where it is clearly seen that the PMU data will seriously challenge these wireless systems. We conclude by highlighting the possible solutions for upgrading the cellular standards, in order to cope with the upcoming...

  19. Structural Health Monitoring Using Wireless Technologies: An Ambient Vibration Test on the Adolphe Bridge, Luxembourg City

    Directory of Open Access Journals (Sweden)

    Adrien Oth

    2012-01-01

    Full Text Available Major threats to bridges primarily consist of the aging of the structural elements, earthquake-induced shaking and standing waves generated by windstorms. The necessity of information on the state of health of structures in real-time, allowing for timely warnings in the case of damaging events, requires structural health monitoring (SHM systems that allow the risks of these threats to be mitigated. Here we present the results of a short-duration experiment carried out with low-cost wireless instruments for monitoring the vibration characteristics and dynamic properties of a strategic civil infrastructure, the Adolphe Bridge in Luxembourg City. The Adolphe Bridge is a masonry arch construction dating from 1903 and will undergo major renovation works in the upcoming years. Our experiment shows that a network of these wireless sensing units is well suited to monitor the vibration characteristics of such a historical arch bridge and hence represents a low-cost and efficient solution for SHM.

  20. Liver support strategies: cutting-edge technologies.

    Science.gov (United States)

    Struecker, Benjamin; Raschzok, Nathanael; Sauer, Igor M

    2014-03-01

    The treatment of end-stage liver disease and acute liver failure remains a clinically relevant issue. Although orthotopic liver transplantation is a well-established procedure, whole-organ transplantation is invasive and increasingly limited by the unavailability of suitable donor organs. Artificial and bioartificial liver support systems have been developed to provide an alternative to whole organ transplantation, but despite three decades of scientific efforts, the results are still not convincing with respect to clinical outcome. In this Review, conceptual limitations of clinically available liver support therapy systems are discussed. Furthermore, alternative concepts, such as hepatocyte transplantation, and cutting-edge developments in the field of liver support strategies, including the repopulation of decellularized organs and the biofabrication of entirely new organs by printing techniques or induced organogenesis are analysed with respect to clinical relevance. Whereas hepatocyte transplantation shows promising clinical results, at least for the temporary treatment of inborn metabolic diseases, so far data regarding implantation of engineered hepatic tissue have only emerged from preclinical experiments. However, the evolving techniques presented here raise hope for bioengineered liver support therapies in the future.

  1. Seamless and secure communications over heterogeneous wireless networks

    CERN Document Server

    Cao, Jiannong

    2014-01-01

    This brief provides an overview of the requirements, challenges, design issues and major techniques for seamless and secure communications over heterogeneous wireless networks. It summarizes and provides detailed insights into the latest research on handoff management, mobility management, fast authentication and security management to support seamless and secure roaming for mobile clients. The reader will also learn about the challenges in developing relevant technologies and providing ubiquitous Internet access over heterogeneous wireless networks. The authors have extensive experience in im

  2. Spallation sources in support of technology

    Energy Technology Data Exchange (ETDEWEB)

    Pynn, R. [Los Alamos National Lab., NM (United States)

    1996-05-01

    In this contribution I summarize a number of recent experiments at the Los Alamos Neutron Science Center (LANSCE) that have contributed to strategic and applied research. A number of new tools have been developed to address these problems, including software that allows materials texture to be obtained during Rietveld refinement, Bragg-edge diffraction, resonant-neutron and proton radiography. These tools have the potential to impact basic as well as applied research. It is clear that a new, more powerful neutron source such as the planned Japanese Hadron Project will be able to use these and other techniques to contribute in a direct way to important industrial technologies. (author)

  3. Supporting Postsecondary English Language Learners' Writing Proficiency Using Technological Tools

    Science.gov (United States)

    Moore, Kathleen A.; Rutherford, Camille; Crawford, Keith A.

    2016-01-01

    Postsecondary international students who are also English language learners face a number of challenges when studying abroad and often are provided with services to support their learning. Though some research examines how institutions can support this population of students, few studies explore how technology is used to support language…

  4. Economics and Governance of the wireless Internet

    DEFF Research Database (Denmark)

    Falch, Morten; Henten, Anders; Tadayoni, Reza

    barriers of entry. In this paper three issues are discussed: 1) Developments in pricing schemes for Internet interconnection and Internet access with special focus on the role of wireless access. 2) Developments in supporting infrastructures with special focus on the increasing role of wireless......The Internet has undergone a growing diversification with regard to types of users, kinds of services and use of transmission technologies and infrastructures. Today, internet services are delivered by the use of many different wired and wireless communication technologies with different technical...... capabilities and limitations, and with different techno-economic characteristics. The question is whether these trends challenge the current mode of governance for the Internet. In the early days, the Internet was considered to be open, free, competitive, with a high level of entrepreneurialism, and with low...

  5. Preservice Teachers' TPACK: Using Technology to Support Inquiry Instruction

    Science.gov (United States)

    Maeng, Jennifer L.; Mulvey, Bridget K.; Smetana, Lara K.; Bell, Randy L.

    2013-12-01

    This investigation provides detailed descriptions of preservice secondary science teachers' technology-enhanced inquiry instruction and their developing TPACK. Prior to student teaching, 27 preservice teachers were introduced to general guidelines for integrating technology to support reform-based science instruction. This instruction was in the context of a 2-year Master of Teaching program. Of the 27 preservice teachers, 26 used technology for inquiry instruction during student teaching. Our goals were to describe how these 26 preservice science teachers: (1) used educational technologies to support students' investigations and (2) demonstrated their developing TPACK through technology-enhanced inquiry instruction. Multiple data sources (observations, lesson plans, interviews, and reflections) allowed for characterization of participants' technology integration to support inquiry instruction and their decision-making related to the use of technology to support inquiry. Results indicated that participants incorporated technologies appropriate to the content and context to facilitate non-experimental and experimental inquiry experiences. Participants developing TPACK was evidenced by their selective and appropriate use of technology. Appropriate technology use for inquiry included the following: (1) to present an engaging introduction, (2) to facilitate data collection, (3) to facilitate data analysis, and (4) to facilitate communication and discussion of results. These results suggest that using digital images to facilitate whole-class inquiry holds considerable promise as a starting point for teachers new to inquiry instruction. Results of the present study may inform science teacher educators' development of content-specific, technology-enhanced learning opportunities that: prepare preservice teachers for the responsibility of supporting inquiry instruction with technology, facilitate the transition to student-centered instruction, and support TPACK development.

  6. Teaching Practice Supported by Technology Use

    DEFF Research Database (Denmark)

    Jensen, Helle Bækkelund

    2006-01-01

    The article deals with e-competence on the individual level by examining the use of web sites by individual university faculty. E-competence is here regarded as the actual use of web sites in on-campus teaching, where the relation between the individual faculty’s conception of teaching and learning...... and the design and use of web sites is viewed as corresponding. It is the hypothesis of the research underlying this article that the design and use of a web site reflects the intentions and beliefs of the university teacher. As a result of this relation it should be possible to explore and analyse conceptions...... of teaching as the underlying reason for taking web technology into use in the teaching and learning practice of faculty staff. The e-practice, which can be observed within this research approach, will be placed in relation to a set of qualitatively different categories of teaching conceptions, thus unveiling...

  7. Intelligent decision technology support in practice

    CERN Document Server

    Neves-Silva, Rui; Jain, Lakhmi; Phillips-Wren, Gloria; Watada, Junzo; Howlett, Robert

    2016-01-01

    This book contains a collection of innovative chapters emanating from topics raised during the 5th KES International Conference on Intelligent Decision Technologies (IDT), held during 2013 at Sesimbra, Portugal. The authors were invited to expand their original papers into a plethora of innovative chapters espousing IDT methodologies and applications. This book documents leading-edge contributions, representing advances in Knowledge-Based and Intelligent Information and Engineering System. It acknowledges that researchers recognize that society is familiar with modern Advanced Information Processing and increasingly expect richer IDT systems. Each chapter concentrates on the theory, design, development, implementation, testing or evaluation of IDT techniques or applications.  Anyone that wants to work with IDT or simply process knowledge should consider reading one or more chapters and focus on their technique of choice. Most readers will benefit from reading additional chapters to access alternative techniq...

  8. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...... activities. The second is to direct student use of ICT in terms of making systems available and teaching academic computing. The third challenge is to supervise and conduct project work online and in blended learning environments. Finally, one must find a way to exploit the potentials of ICT in problem......-oriented group work by choosing helpful tools while maintaining a balance between advanced uses and a need to impose a measure of uniformity so as not to balkanize the learning environment....

  9. Using technology to support the CLAS Standards.

    Science.gov (United States)

    Cassey, Margaret Z

    2008-01-01

    Effective communication is essential for ensuring effective patient education to support patient acquisition of self-care knowledge and behaviors. National standards have been developed suggesting methods for meeting this need and systems changes are either mandated or recommended within health care delivery organizations to assure movement toward the goal of effective patient-provider communication. By availing themselves of the opportunity to assign these nationally standardized cultural competency modules as part of institutional requirements, nursing administrators and managers can implement a cost-effective method for improving the cultural knowledge base of nursing personnel.

  10. Routing and Scheduling Algorithms for WirelessHARTNetworks: A Survey.

    Science.gov (United States)

    Nobre, Marcelo; Silva, Ivanovitch; Guedes, Luiz Affonso

    2015-04-24

    Wireless communication is a trend nowadays for the industrial environment. A number of different technologies have emerged as solutions satisfying strict industrial requirements (e.g., WirelessHART, ISA100.11a, WIA-PA). As the industrial environment presents a vast range of applications, adopting an adequate solution for each case is vital to obtain good performance of the system. In this context, the routing and scheduling schemes associated with these technologies have a direct impact on important features, like latency and energy consumption. This situation has led to the development of a vast number of routing and scheduling schemes. In the present paper, we focus on the WirelessHART technology, emphasizing its most important routing and scheduling aspects in order to guide both end users and the developers of new algorithms. Furthermore, we provide a detailed literature review of the newest routing and scheduling techniques forWirelessHART, discussing each of their features. These routing algorithms have been evaluated in terms of their objectives, metrics, the usage of theWirelessHART structures and validation method. In addition, the scheduling algorithms were also evaluated by metrics, validation, objectives and, in addition, by multiple superframe support, as well as by the redundancy method used. Moreover, this paper briefly presents some insights into the main WirelessHART simulation modules available, in order to provide viable test platforms for the routing and scheduling algorithms. Finally, some open issues in WirelessHART routing and scheduling algorithms are discussed.

  11. Combined single-mode/multimode fiber link supporting simplified in-building 60-GHz gigabit wireless access

    DEFF Research Database (Denmark)

    Pham, Tien Thang; Lebedev, Alexander; Beltrán, Marta

    2012-01-01

    In this paper, we propose and experimentally demonstrate a simple, cost-effective hybrid gigabit fiber-wireless system for in-building wireless access. Simplicity and cost-effectiveness are achieved in all parts of the system by utilizing direct laser modulation, optical frequency up-conversion, ......In this paper, we propose and experimentally demonstrate a simple, cost-effective hybrid gigabit fiber-wireless system for in-building wireless access. Simplicity and cost-effectiveness are achieved in all parts of the system by utilizing direct laser modulation, optical frequency up...

  12. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-08-01

    This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

  13. Cross-Layer Support for Energy Efficient Routing in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    N. Chilamkurti

    2009-01-01

    Full Text Available The Dynamic Source Routing (DSR algorithm computes a new route when packet loss occurs. DSR does not have an in-built mechanism to determine whether the packet loss was the result of congestion or node failure causing DSR to compute a new route. This leads to inefficient energy utilization when DSR is used in wireless sensor networks. In this work, we exploit cross-layer optimization techniques that extend DSR to improve its routing energy efficiency by minimizing the frequency of recomputed routes. Our proposed approach enables DSR to initiate a route discovery only when link failure occurs. We conducted extensive simulations to evaluate the performance of our proposed cross-layer DSR routing protocol. The simulation results obtained with our extended DSR routing protocol show that the frequency with which new routes are recomputed is 50% lower compared with the traditional DSR protocol. This improvement is attributed to the fact that, with our proposed cross-layer DSR, we distinguish between congestion and link failure conditions, and new routes are recalculated only for the latter.

  14. Integrated plant information technology design support functionality

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P. W.; Goland, D. [Atomic Energy Canada Ltd., (Canada)

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

  15. 5G – Wireless Communications for 2020

    DEFF Research Database (Denmark)

    Barreto, André; Faria, Bruno; Portela Lopes de Almeida, Erika

    2016-01-01

    and varied requirements that cannot be satisfied by current networks. On account of this, efforts are being made all over the world to design new wireless technologies that will support the expected demands for the next decade. These technologies, embraced under the commercial name of 5th generation......, are currently being studied, and in this tutorial paper we will give an overview of the main trends that are likely to make their way in the next-generation standards....

  16. Wireless mesh networks

    CERN Document Server

    Held, Gilbert

    2005-01-01

    Wireless mesh networking is a new technology that has the potential to revolutionize how we access the Internet and communicate with co-workers and friends. Wireless Mesh Networks examines the concept and explores its advantages over existing technologies. This book explores existing and future applications, and examines how some of the networking protocols operate.The text offers a detailed analysis of the significant problems affecting wireless mesh networking, including network scale issues, security, and radio frequency interference, and suggests actual and potential solutions for each pro

  17. Precision farming solution in Egypt using the wireless sensor network technology

    Directory of Open Access Journals (Sweden)

    Sherine M. Abd El-kader

    2013-11-01

    Full Text Available This paper gives an overview of the wireless sensor network, studies its application in precision farming, and its importance for improving the agriculture in Egypt. An example for using wireless sensor network in cultivating the potato crop in Egypt is given, and it is shown that the cost of the system with respect to the yearly benefit from exporting potato crop after recovering the loss from its export preventing (this loss is estimated to be 2 billion pounds which is the value of the potato export to Russia annually, after the expected consequence of increasing the yield size and quality, after the expected savings in the resources used in cultivation such as the fertilizer and irrigation water, and after recovering the monetary loss results from the harms caused by excessive use of pesticides, is acceptable, and it can be said that this cost can be recovered in one year. It is concluded that the APTEEN protocol is the most suitable routing strategy to precision farming and its network lifetime can reach 6.5 month which is a period more than the maximum value of the potato crop lifetime that estimated to be 120 day, but it is greater than the yearly cultivation period of potato in Egypt which reaches 6 month.

  18. Wireless Patient Monitoring System Using Point to Multi Point Zigbee Technology

    Directory of Open Access Journals (Sweden)

    Aung Soe Phyo

    2015-06-01

    Full Text Available ABSTRACT A ZigBee sensor network for data acquisition and monitoring is presented in this paper. A ZigBee module is connected via a USB interface to a Microsoft Windows PC which works as a base station in the network. Data collected by sensor devices are sent to the base station PC which is set as Wireless sensorNetwork WSN. ZigBee is low power consumption built-in security method and ratified specifications make it very suitable to be used with medical sensor devices.This application of Zigbee based network consists of two transmitter sections and a receiver section.Each transmitter section consists of heartbeat sensor body temperature sensor microcontroller Zigbee and LCD module.In the proposed system the patients health is continuously monitored and theacquired data is analyzed at a personal computer using Graphical User InterfaceGUI. If a particular patients health parameter is higher or lower the threshold values an alarm system is used to alert the doctor. The aim of this system is to know the condition of patients health by the doctor immediately and to reduce the load of the staff taking care of the patient in the hospitals. In this paper wireless point to multipoint system is used between doctor and patient.

  19. Wireless and wireline service convergence in next generation optical access networks - the FP7 WISCON project

    DEFF Research Database (Denmark)

    Vegas Olmos, Juan José; Pang, Xiaodan; Lebedev, Alexander

    2014-01-01

    The next generation of information technology demands both high capacity and mobility for applications such as high speed wireless access capable of supporting broadband services. The transport of wireless and wireline signals is converging into a common telecommunication infrastructure. In this ......The next generation of information technology demands both high capacity and mobility for applications such as high speed wireless access capable of supporting broadband services. The transport of wireless and wireline signals is converging into a common telecommunication infrastructure...... radio-over-fiber (RoF) systems; this is a promising solution to implement broadband seamless wireless -wireline access networks. This project successfully concluded in autumn 2013, and is being follow up by another Marie Curie project entitled “flexible edge nodes for dynamic optical interconnection...

  20. TTI Phase 2 Institutional Support: Science, Technology and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    TTI Phase 2 Institutional Support: Science, Technology and Innovation Policy Research Organization. This funding will help strengthen the Science, Technology and Innovation Policy Research Organization's (STIPRO) role as a credible public policy institution in Tanzania by enhancing its ability to provide high-quality, ...

  1. Technology Integration Support Levels for In-Service Teachers

    Science.gov (United States)

    Williams, Mable Evans

    2017-01-01

    In-service teachers across the globe are expected to integrate technology in their respective instructional content area. The purpose of this qualitative study was to explore the perceptions of in-service teachers concerning building-level support for technology integration. Participants in the study were asked to participate in semi-structured…

  2. Supporting Families of Young Children with Disabilities Using Technology

    Science.gov (United States)

    Parette, Howard P.; Meadan, Hedda; Doubet, Sharon; Hess, Jackie

    2010-01-01

    Research has frequently focused on needs, preferences, and practices of families of young children with disabilities. Surprisingly, relatively little seems to be known about how families use technology to gain information about and support their needs, even though Web-based and other information and communication technology applications have…

  3. Apparatus and method supporting wireless access to multiple security layers in an industrial control and automation system or other system

    Science.gov (United States)

    Chen, Yu-Gene T.

    2013-04-16

    A method includes receiving a message at a first wireless node. The first wireless node is associated with a first wired network, and the first wired network is associated with a first security layer. The method also includes transmitting the message over the first wired network when at least one destination of the message is located in the first security layer. The method further includes wirelessly transmitting the message for delivery to a second wireless node when at least one destination of the message is located in a second security layer. The second wireless node is associated with a second wired network, and the second wired network is associated with the second security layer. The first and second security layers may be associated with different security paradigms and/or different security domains. Also, the message could be associated with destinations in the first and second security layers.

  4. Wireless network security theories and applications

    CERN Document Server

    Chen, Lei; Zhang, Zihong

    2013-01-01

    Wireless Network Security Theories and Applications discusses the relevant security technologies, vulnerabilities, and potential threats, and introduces the corresponding security standards and protocols, as well as provides solutions to security concerns. Authors of each chapter in this book, mostly top researchers in relevant research fields in the U.S. and China, presented their research findings and results about the security of the following types of wireless networks: Wireless Cellular Networks, Wireless Local Area Networks (WLANs), Wireless Metropolitan Area Networks (WMANs), Bluetooth

  5. Energy efficiency in wireless networks

    CERN Document Server

    Jumira, Oswald

    2013-01-01

    The last decade has witnessed an unprecedented development and growth in global wireless communications systems, technologies and network "traffic" generated over network infrastructures.This book presents state-of-the-art energy-efficient techniques, designs and implementations that pertain to wireless communication networks such as cellular networks, wireless local area networks (WLANs) and wireless ad hoc networks (WAHNs) including mobile ad hoc networks (MANETs), and wireless sensor networks (WSNs) as they are deployed across the world to facilitate "always on" reliable high-speed

  6. 5G Wireless Communication Systems

    OpenAIRE

    Saddam Hossain

    2013-01-01

    As a subscriber becomes more aware of the mobile phone technology, he/she will seek for anappropriate package all together, including all the advanced features of a cellular phone can have. Hence, the search for new technology is always the main intention of the prime cell phone giants to out innovate their competitors. In addition, the main purpose of the fifth generation wireless networks (5G Wireless networks) is planned to design the best wireless world that is free from limitations...

  7. FEATURES OF USING AUGMENTED REALITY TECHNOLOGY TO SUPPORT EDUCATIONAL PROCESSES

    Directory of Open Access Journals (Sweden)

    Yury A. Kravchenko

    2014-01-01

    Full Text Available The paper discusses the concept and technology of augmented reality, the rationale given the relevance and timeliness of its use to support educational processes. Paper is a survey and study of the possibility of using augmented reality technology in education. Architecture is proposed and constructed algorithms of the software system management QR-codes media objects. An overview of the features and uses of augmented reality technology to support educational processes is displayed, as an option of a new form of visual demonstration of complex objects, models and processes. 

  8. The Application of Wireless Sensor in Aquaculture Water Quality Monitoring

    OpenAIRE

    Ding, Wen; Ma, Yinchi

    2011-01-01

    Part 1: Simulation, Optimization, Monitoring and Control Technology; International audience; The current means for aquaculture water quality monitoring have a weak infrastructure. We research to use wireless sensor technology, embedded computing technology, MEMS technology, distributing information processing technology and wireless communication technology to build the wireless network sensor network system. This system is a digital, networked, intelligent real-time dynamic for monitoring th...

  9. A passive wireless multi-sensor SAW technology device and system perspectives.

    Science.gov (United States)

    Malocha, Donald C; Gallagher, Mark; Fisher, Brian; Humphries, James; Gallagher, Daniel; Kozlovski, Nikolai

    2013-05-10

    This paper will discuss a SAW passive, wireless multi-sensor system under development by our group for the past several years. The device focus is on orthogonal frequency coded (OFC) SAW sensors, which use both frequency diversity and pulse position reflectors to encode the device ID and will be briefly contrasted to other embodiments. A synchronous correlator transceiver is used for the hardware and post processing and correlation techniques of the received signal to extract the sensor information will be presented. Critical device and system parameters addressed include encoding, operational range, SAW device parameters, post-processing, and antenna-SAW device integration. A fully developed 915 MHz OFC SAW multi-sensor system is used to show experimental results. The system is based on a software radio approach that provides great flexibility for future enhancements and diverse sensor applications. Several different sensor types using the OFC SAW platform are shown.

  10. A Passive Wireless Multi-Sensor SAW Technology Device and System Perspectives

    Directory of Open Access Journals (Sweden)

    Nikolai Kozlovski

    2013-05-01

    Full Text Available This paper will discuss a SAW passive, wireless multi-sensor system under development by our group for the past several years. The device focus is on orthogonal frequency coded (OFC SAW sensors, which use both frequency diversity and pulse position reflectors to encode the device ID and will be briefly contrasted to other embodiments. A synchronous correlator transceiver is used for the hardware and post processing and correlation techniques of the received signal to extract the sensor information will be presented. Critical device and system parameters addressed include encoding, operational range, SAW device parameters, post-processing, and antenna-SAW device integration. A fully developed 915 MHz OFC SAW multi-sensor system is used to show experimental results. The system is based on a software radio approach that provides great flexibility for future enhancements and diverse sensor applications. Several different sensor types using the OFC SAW platform are shown.

  11. [Study on mobile phone based wireless ECG monitoring technology system typical demonstration applications].

    Science.gov (United States)

    Yu, Yang; Liu, Jing

    2011-01-01

    Based on the mobile phone platform with wireless real-time ECG monitoring system developed in our lab, this article is dedicated to evaluate its practical value in people test. A series of new conceptual experiments were designed and performed. Particularly, ECG characteristics under different age, gender, health and motion conditions are evaluated. Effects of living habits such as drinking wine, coffee including various psychological conditions such as excitation, anxiety etc. to the ECG response are investigated. The human ECG under different time in a day such as morning, afternoon and late-night was evaluated. These conceptual experiments, which are hard to conduct otherwise using conventional devices, demonstrate the pervasive merits of the new system for fundamental study of heart disease as well as daily healthcare.

  12. Assistive Technologies for Aged Care: Supportive or Empowering?

    Directory of Open Access Journals (Sweden)

    Suchada Vichitvanichphong

    2014-11-01

    Full Text Available The main objective of this paper is to explore the potentials of assistive technologies to support seniors’ independent living. The work looks at two salient aspects of utilizing technologies for elderly, namely direct support and empowering technologies. The research undertakes a comprehensive analysis of attempts that have been made through investigation of the literature. For this purpose, a realist review of relevant papers published since 2000 has been conducted. The paper concludes that although much research in this area targets the direct support for older adults, the effective use of technologies to maintain seniors’ physical and cognitive abilities requires further investigations. This can provide avenues of opportunities that would empower seniors for their independent living.

  13. Technology tools to support reading in the digital age.

    Science.gov (United States)

    Biancarosa, Gina; Griffiths, Gina G

    2012-01-01

    Advances in digital technologies are dramatically altering the texts and tools available to teachers and students. These technological advances have created excitement among many for their potential to be used as instructional tools for literacy education. Yet with the promise of these advances come issues that can exacerbate the literacy challenges identified in the other articles in this issue. In this article Gina Biancarosa and Gina Griffiths characterize how literacy demands have changed in the digital age and how challenges identified in other articles in the issue intersect with these new demands. Rather than seeing technology as something to be fit into an already crowded education agenda, Biancarosa and Griffiths argue that technology can be conceptualized as affording tools that teachers can deploy in their quest to create young readers who possess the higher levels of literacy skills and background knowledge demanded by today's information-based society. Biancarosa and Griffiths draw on research to highlight some of the ways technology has been used to build the skills and knowledge needed both by children who are learning to read and by those who have progressed to reading to learn. In their review of the research, Biancarosa and Griffiths focus on the hardware and software used to display and interface with digital text, or what they term e-reading technology. Drawing on studies of e-reading technology and computer technology more broadly, they also reflect on the very real, practical challenges to optimal use of e-reading technology. The authors conclude by presenting four recommendations to help schools and school systems meet some of the challenges that come with investing in e-reading technology: use only technologies that support Universal Design for Learning; choose evidence-based tools; provide technology users with systemic supports; and capitalize on the data capacities and volume of information that technology provides.

  14. A Benefit Analysis of Infusing Wireless into Aircraft and Fleet Operations - Report to Seedling Project Efficient Reconfigurable Cockpit Design and Fleet Operations Using Software Intensive, Network Enabled, Wireless Architecture (ECON)

    Science.gov (United States)

    Alexandrov, Natalia; Holmes, Bruce J.; Hahn, Andrew S.

    2016-01-01

    We report on an examination of potential benefits of infusing wireless technologies into various areas of aircraft and airspace operations. The analysis is done in support of a NASA seedling project Efficient Reconfigurable Cockpit Design and Fleet Operations Using Software Intensive, Network Enabled Wireless Architecture (ECON). The study has two objectives. First, we investigate one of the main benefit hypotheses of the ECON proposal: that the replacement of wired technologies with wireless would lead to significant weight reductions on an aircraft, among other benefits. Second, we advance a list of wireless technology applications and discuss their system benefits. With regard to the primary hypothesis, we conclude that the promise of weight reduction is premature. Specificity of the system domain and aircraft, criticality of components, reliability of wireless technologies, the weight of replacement or augmentation equipment, and the cost of infusion must all be taken into account among other considerations, to produce a reliable estimate of weight savings or increase.

  15. Technological products to support the Venezuelan heavy oil development

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, J.; Negrin, Z.; Duran, M.; Vilera, M.; Santamaria, F. [PDVSA INTEVEP (Venezuela)

    2011-07-01

    In Venezuela, important reserves of heavy oil crude are located at the Orinoco oil belt and the challenge is to develop these fields in a safe and environmentally friendly way. To address this challenge, PDVSA Intevep has been developing cutting edge technologies for more than 30 years. The aim of this paper is to present the principal inventions of PDVSA Intevep and their application in the Venezuelan traditional areas. PDVSA Intevep is the technological development and research center of the Venezuelan national oil industry; they own 773 patents, 103 trademarks, 48 copyrights, 13 trade secrets and 35 products used in different technological areas. The technologies presented will be used in the Orinoco oil belt in support of Venezuelan technological sovereignty. PDVSA Intevep has developed and adapted many technologies aimed at putting oil resources at the service of the whole population and ending social inequalities.

  16. Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-04-01

    This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

  17. Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2012-04-01

    The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

  18. Applying Technology Ranking and Systems Engineering in Advanced Life Support

    Science.gov (United States)

    Jones, Harry; Luna, Bernadette (Technical Monitor)

    2000-01-01

    According to the Advanced Life Support (ALS) Program Plan, the Systems Modeling and Analysis Project (SMAP) has two important tasks: 1) prioritizing investments in ALS Research and Technology Development (R&TD), and 2) guiding the evolution of ALS systems. Investments could be prioritized simply by independently ranking different technologies, but we should also consider a technology's impact on system design. Guiding future ALS systems will require SMAP to consider many aspects of systems engineering. R&TD investments can be prioritized using familiar methods for ranking technology. The first step is gathering data on technology performance, safety, readiness level, and cost. Then the technologies are ranked using metrics or by decision analysis using net present economic value. The R&TD portfolio can be optimized to provide the maximum expected payoff in the face of uncertain future events. But more is needed. The optimum ALS system can not be designed simply by selecting the best technology for each predefined subsystem. Incorporating a new technology, such as food plants, can change the specifications of other subsystems, such as air regeneration. Systems must be designed top-down starting from system objectives, not bottom-up from selected technologies. The familiar top-down systems engineering process includes defining mission objectives, mission design, system specification, technology analysis, preliminary design, and detail design. Technology selection is only one part of systems analysis and engineering, and it is strongly related to the subsystem definitions. ALS systems should be designed using top-down systems engineering. R&TD technology selection should consider how the technology affects ALS system design. Technology ranking is useful but it is only a small part of systems engineering.

  19. The wireless internet explained

    CERN Document Server

    Rhoton, John

    2001-01-01

    The Wireless Internet Explained covers the full spectrum of wireless technologies from a wide range of vendors, including initiatives by Microsoft and Compaq. The Wireless Internet Explained takes a practical look at wireless technology. Rhoton explains the concepts behind the physics, and provides an overview that clarifies the convoluted set of standards heaped together under the umbrella of wireless. It then expands on these technical foundations to give a panorama of the increasingly crowded landscape of wireless product offerings. When it comes to actual implementation the book gives abundant down-to-earth advice on topics ranging from the selection and deployment of mobile devices to the extremely sensitive subject of security.Written by an expert on Internet messaging, the author of Digital Press''s successful Programmer''s Guide to Internet Mail and X.400 and SMTP: Battle of the E-mail Protocols, The Wireless Internet Explained describes and evaluates the current state of the fast-growing and crucial...

  20. Feasibility Study on a Portable Field Pest Classification System Design Based on DSP and 3G Wireless Communication Technology

    Directory of Open Access Journals (Sweden)

    Fei Liu

    2012-03-01

    Full Text Available This paper presents a feasibility study on a real-time in field pest classification system design based on Blackfin DSP and 3G wireless communication technology. This prototype system is composed of remote on-line classification platform (ROCP, which uses a digital signal processor (DSP as a core CPU, and a host control platform (HCP. The ROCP is in charge of acquiring the pest image, extracting image features and detecting the class of pest using an Artificial Neural Network (ANN classifier. It sends the image data, which is encoded using JPEG 2000 in DSP, to the HCP through the 3G network at the same time for further identification. The image transmission and communication are accomplished using 3G technology. Our system transmits the data via a commercial base station. The system can work properly based on the effective coverage of base stations, no matter the distance from the ROCP to the HCP. In the HCP, the image data is decoded and the pest image displayed in real-time for further identification. Authentication and performance tests of the prototype system were conducted. The authentication test showed that the image data were transmitted correctly. Based on the performance test results on six classes of pests, the average accuracy is 82%. Considering the different live pests’ pose and different field lighting conditions, the result is satisfactory. The proposed technique is well suited for implementation in field pest classification on-line for precision agriculture.

  1. Feasibility study on a portable field pest classification system design based on DSP and 3G wireless communication technology.

    Science.gov (United States)

    Han, Ruizhen; He, Yong; Liu, Fei

    2012-01-01

    This paper presents a feasibility study on a real-time in field pest classification system design based on Blackfin DSP and 3G wireless communication technology. This prototype system is composed of remote on-line classification platform (ROCP), which uses a digital signal processor (DSP) as a core CPU, and a host control platform (HCP). The ROCP is in charge of acquiring the pest image, extracting image features and detecting the class of pest using an Artificial Neural Network (ANN) classifier. It sends the image data, which is encoded using JPEG 2000 in DSP, to the HCP through the 3G network at the same time for further identification. The image transmission and communication are accomplished using 3G technology. Our system transmits the data via a commercial base station. The system can work properly based on the effective coverage of base stations, no matter the distance from the ROCP to the HCP. In the HCP, the image data is decoded and the pest image displayed in real-time for further identification. Authentication and performance tests of the prototype system were conducted. The authentication test showed that the image data were transmitted correctly. Based on the performance test results on six classes of pests, the average accuracy is 82%. Considering the different live pests' pose and different field lighting conditions, the result is satisfactory. The proposed technique is well suited for implementation in field pest classification on-line for precision agriculture.

  2. Resource management in wireless networking

    CERN Document Server

    Cardei, Mihaela; Du, Ding-Zhu

    2005-01-01

    This is the first book that provides readers with a deep technical overview of recent advances in resource management for wireless networks at different layers of the protocol stack. The subject is explored in various wireless networks, such as ad hoc wireless networks, 3G/4G cellular, IEEE 802.11, and Bluetooth personal area networks.Survey chapters give an excellent introduction to key topics in resource management for wireless networks, while experts will be satisfied by the technical depth of the knowledge imparted in chapters exploring hot research topics.The subject area discussed in this book is very relevant today, considering the recent remarkable growth of wireless networking and the convergence of wireless personal communications, internet technologies and real-time multimedia.This volume is a very good companion for practitioners working on implementing solutions for multimedia and Quality of Service - sensitive applications over wireless networks.Written for:Researchers, faculty members, students...

  3. Wireless network pricing

    CERN Document Server

    Huang, Jianwei

    2013-01-01

    Today's wireless communications and networking practices are tightly coupled with economic considerations, to the extent that it is almost impossible to make a sound technology choice without understanding the corresponding economic implications. This book aims at providing a foundational introduction on how microeconomics, and pricing theory in particular, can help us to understand and build better wireless networks. The book can be used as lecture notes for a course in the field of network economics, or a reference book for wireless engineers and applied economists to understand how pricing

  4. Information and Communications Technology in support of NHI

    CSIR Research Space (South Africa)

    Chetty, M

    2012-10-01

    Full Text Available and Communications Technology in support of NHI 4th Biennial Conference Presented by: Matthew Chetty Date: 9 October 2012 Introduction ? The Health system in South Africa is undergoing transformative changes ? Appropriate information systems form the basis... diagnostic images, patient records, test results, research samples, financial codes, etc. ? eHealth standards do not address one unified area of technology but multiple areas ? The eHealth standards arena involves competing or overlapping standards...

  5. Using Technology to Support Project and Problem-based Learning

    OpenAIRE

    Donnelly, Roisin

    2005-01-01

    This chapter is aimed at supporting lecturers in universities and colleges who have begun or are considering introducing project or problem-based learning (PBL) for students’ learning. In order to keep up with rapid change and make the most of learning technologies as aids to both learning strategies, a range of practical insights based on research will be provided in sections, supplemented with a variety of examples of learning technology being infused into both strategies. The range provide...

  6. Space Life Support Technology Applications to Terrestrial Environmental Problems

    Science.gov (United States)

    Schwartzkopf, Steven H.; Sleeper, Howard L.

    1993-01-01

    Many of the problems now facing the human race on Earth are, in fact, life support issues. Decline of air Quality as a result of industrial and automotive emissions, pollution of ground water by organic pesticides or solvents, and the disposal of solid wastes are all examples of environmental problems that we must solve to sustain human life. The technologies currently under development to solve the problems of supporting human life for advanced space missions are extraordinarily synergistic with these environmental problems. The development of these technologies (including both physicochemical and bioregenerative types) is increasingly focused on closing the life support loop by removing and recycling contaminants and wastes to produce the materials necessary to sustain human life. By so doing, this technology development effort also focuses automatically on reducing resupply logistics requirements and increasing crew safety through increased self-sufficiency. This paper describes several technologies that have been developed to support human life in space and illustrates the applicability of the technologies to environmental problems including environmental remediation and pollution prevention.

  7. ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT.

    Science.gov (United States)

    Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, K C

    2016-01-01

    Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies.

  8. Development of Life Support System Technologies for Human Lunar Missions

    Science.gov (United States)

    Barta, Daniel J.; Ewert, Michael K.

    2009-01-01

    With the Preliminary Design Review (PDR) for the Orion Crew Exploration Vehicle planned to be completed in 2009, Exploration Life Support (ELS), a technology development project under the National Aeronautics and Space Administration s (NASA) Exploration Technology Development Program, is focusing its efforts on needs for human lunar missions. The ELS Project s goal is to develop and mature a suite of Environmental Control and Life Support System (ECLSS) technologies for potential use on human spacecraft under development in support of U.S. Space Exploration Policy. ELS technology development is directed at three major vehicle projects within NASA s Constellation Program (CxP): the Orion Crew Exploration Vehicle (CEV), the Altair Lunar Lander and Lunar Surface Systems, including habitats and pressurized rovers. The ELS Project includes four technical elements: Atmosphere Revitalization Systems, Water Recovery Systems, Waste Management Systems and Habitation Engineering, and two cross cutting elements, Systems Integration, Modeling and Analysis, and Validation and Testing. This paper will provide an overview of the ELS Project, connectivity with its customers and an update to content within its technology development portfolio with focus on human lunar missions.

  9. Long span cable supported bridges - present technology and trends

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1998-01-01

    The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues...

  10. Toward Understanding Non-Centralized Technology Support in Higher Education

    Science.gov (United States)

    Jackson, Robert Jonathan

    2009-01-01

    The focus of this research is an examination of service quality provided by non-centralized technology personnel, Local Technical Support Providers (LSPs), at a southern research university. The SERVQUAL instrument was selected to measure service quality of LSPs within the Academic Affairs Division. The rationale for selecting and testing SERVQUAL…

  11. 31 CFR 548.313 - Financial, material, or technological support.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Financial, material, or technological support. 548.313 Section 548.313 Money and Finance: Treasury Regulations Relating to Money and Finance... documentation or identification; communications equipment; computers; electronic or other devices or equipment...

  12. 31 CFR 594.317 - Financial, material, or technological support.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Financial, material, or technological support. 594.317 Section 594.317 Money and Finance: Treasury Regulations Relating to Money and Finance...; false documentation or identification; communications equipment; computers; electronic or other devices...

  13. Using Technology to Support Teachers' Lesson Modifications during Lesson Study

    Science.gov (United States)

    Skultety, Lisa; Gonzalez, Gloriana; Vargas, Gabriela

    2017-01-01

    Lesson study is a professional development activity that increases teachers' attention to student thinking. However, coordinating teachers' live observations of a lesson can be challenging. Using the framework of "distributed cognition," we investigate whether technology supports teachers' examination of student thinking and aids the…

  14. Agent Technology in Agile Multiparallel Manufacturing and Product Support

    NARCIS (Netherlands)

    van Moergestel, L.J.M.

    2014-01-01

    The thesis describes the application of agent technology in product manufacturing and product support. Important issues in the requirements of modern production are short time to market, requirement-driven production and low cost small quantity production. To meet these requirements special low cost

  15. Technology to Support Sign Language for Students with Disabilities

    Science.gov (United States)

    Donne, Vicki

    2013-01-01

    This systematic review of the literature provides a synthesis of research on the use of technology to support sign language. Background research on the use of sign language with students who are deaf/hard of hearing and students with low incidence disabilities, such as autism, intellectual disability, or communication disorders is provided. The…

  16. Peer production & peer support at the Free Technology Academy

    NARCIS (Netherlands)

    Potters, Hanneke; Berlanga, Adriana; Bijlsma, Lex

    2012-01-01

    Potters, H., Berlanga, A. J., & Lex, B. (2011). Peer Production & Peer Support at the Free Technology Academy. In G. van de Veer, P. B. Sloep, & M. van Eekelen (Eds.), Proceedings Computer Science Education Research Conference (CSERC '11) (pp. 49-58). April, 7-8, 2011, Heerlen, The Netherlands: ACM.

  17. Using Telemedicine and Wireless Technology to Improve Diabetic Outcomes in Poorly Controlled Patients

    National Research Council Canada - National Science Library

    Vigersky, Robert

    2002-01-01

    Diabetes mellitus is a condition that lends itself to the use of telemedicine and technology because its management relies heavily on the collection, sharing, and interpretation of blood glucose data...

  18. Evolution of Monolithic Technology for Wireless Communications: GaN MMIC Power Amplifiers For Microwave Radios

    Directory of Open Access Journals (Sweden)

    Vittorio Camarchia

    2014-09-01

    Full Text Available This paper presents the progress of monolithic technology for microwaveapplication, focusing on gallium nitride technology advances in the realization of integratedpower amplifiers. Three design examples, developed for microwave backhaul radios, areshown. The first design is a 7 GHz Doherty developed with a research foundry, while thesecond and the third are a 7 GHz Doherty and a 7–15 GHz dual-band combined poweramplifiers, both based on a commercial foundry process. The employed architectures, themain design steps and the pros and cons of using gallium nitride technology are highlighted.The measured performance demonstrates the potentialities of the employed technology, andthe progress in the accuracy, reliability and performance of the process.

  19. Supporting Collective Inquiry: A Technology Framework for Distributed Learning

    Science.gov (United States)

    Tissenbaum, Michael

    This design-based study describes the implementation and evaluation of a technology framework to support smart classrooms and Distributed Technology Enhanced Learning (DTEL) called SAIL Smart Space (S3). S3 is an open-source technology framework designed to support students engaged in inquiry investigations as a knowledge community. To evaluate the effectiveness of S3 as a generalizable technology framework, a curriculum named PLACE (Physics Learning Across Contexts and Environments) was developed to support two grade-11 physics classes (n = 22; n = 23) engaged in a multi-context inquiry curriculum based on the Knowledge Community and Inquiry (KCI) pedagogical model. This dissertation outlines three initial design studies that established a set of design principles for DTEL curricula, and related technology infrastructures. These principles guided the development of PLACE, a twelve-week inquiry curriculum in which students drew upon their community-generated knowledge base as a source of evidence for solving ill-structured physics problems based on the physics of Hollywood movies. During the culminating smart classroom activity, the S3 framework played a central role in orchestrating student activities, including managing the flow of materials and students using real-time data mining and intelligent agents that responded to emergent class patterns. S3 supported students' construction of knowledge through the use individual, collective and collaborative scripts and technologies, including tablets and interactive large-format displays. Aggregate and real-time ambient visualizations helped the teacher act as a wondering facilitator, supporting students in their inquiry where needed. A teacher orchestration tablet gave the teacher some control over the flow of the scripted activities, and alerted him to critical moments for intervention. Analysis focuses on S3's effectiveness in supporting students' inquiry across multiple learning contexts and scales of time, and in

  20. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2014

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-02-01

    This FY 2014 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  1. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2015

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-01-08

    This FY 2015 report updates the results of an effort to identify and document the commercial and emerging (projected to be commercialized within the next 3 to 5 years) hydrogen and fuel cell technologies and products that resulted from U.S. Department of Energy support through the Fuel Cell Technologies Office in the Office of Energy Efficiency and Renewable Energy.

  2. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program - 2012

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-09-01

    This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  3. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-09-01

    This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  4. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2013

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-04-30

    This FY 2013 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  5. Breast cancer survivors' preferences for technology-supported exercise interventions.

    Science.gov (United States)

    Phillips, Siobhan M; Conroy, David E; Keadle, Sarah Kozey; Pellegrini, Christine A; Lloyd, Gillian R; Penedo, Frank J; Spring, Bonnie

    2017-05-03

    The purpose of this study was to explore breast cancer survivors' interest in and preferences for technology-supported exercise interventions. Post-treatment survivors [n = 279; M age = 60.7 (SD = 9.7)] completed a battery of online questionnaires in August 2015. Descriptive statistics were calculated for all data. Logistic regression analyses were conducted to examine relationships between survivors' interest in a technology-supported exercise interventions and demographic, disease, and behavioral factors. These same factors were examined in relation to perceived effectiveness of such interventions using multiple regression analyses. About half (53.4%) of survivors self-reported meeting public health recommendations for physical activity. Fewer than half reported using an exercise or diet mobile app (41.2%) or owning an activity tracker (40.5%). The majority were interested in receiving remotely delivered exercise counseling (84.6%), participating in a remotely delivered exercise intervention (79.5%), and using an exercise app or website (68%). Survivors reported that the most helpful technology-supported intervention components would be an activity tracker (89.5%), personalized feedback (81.2%), and feedback on how exercise is influencing mood, fatigue, etc. (73.6%). Components rated as least helpful were social networking integration (31.2%), group competitions (33.9%), and ability to see others' progress (35.1%). Preferences for technology-supported exercise interventions varied among breast cancer survivors. Nonetheless, data indicate that technology-supported interventions may be feasible and acceptable. Engaging stakeholders may be important in developing and testing potential intervention components.

  6. Introduction to Ultra Wideband for Wireless Communications

    DEFF Research Database (Denmark)

    Nikookar, Homayoun; Prasad, Ramjee

    communications. Due to tutorial nature of the book it can also be adopted as a textbook on the subject in the Telecommunications Engineering curriculum. Problems at the end of each chapter extend the reader's understanding of the subject. Introduction to Ultra Wideband for Wireless Communications will aslo...... be useful for practicing engineers from industry who deal with the wireless systems that are designed and analyzed with the UWB technique.......Ultra Wideband (UWB) Technology is the cutting edge technology for wireless communications with a wide range of applications. In Introduction to Ultra Wideband for Wireless Communications UWB principles and technologies for wireless communications are explained clearly. Key issues such as UWB...

  7. Structural processing for wireless communications

    CERN Document Server

    Lu, Jianhua; Ge, Ning

    2015-01-01

    This brief presents an alternative viewpoint on processing technology for wireless communications based on recent research advances. As a lever in emerging processing technology, the structure perspective addresses the complexity and uncertainty issues found in current wireless applications. Likewise, this brief aims at providing a new prospective to the development of communication technology and information science, while stimulating new theories and technologies for wireless systems with ever-increasing complexity. Readers of this brief may range from graduate students to researchers in related fields.

  8. Supporting sustainable electricity technologies in Greece using MCDM

    Energy Technology Data Exchange (ETDEWEB)

    Doukas, H.; Patlitzianas, K.D.; Psarras, J. [National Technical Univ., Athens (Greece). School of Electrical and Computer Engineering

    2006-06-15

    The penetration of sustainable technologies in electricity generation is low until now in Greece. However, the recent adoption of legislative rules towards the effective operation of liberalized markets, as well as the increased impact of climate change on the electricity sector towards the period 2008-2012, bring out these technologies as key means for establishing conditions of security, stability and environmental protection. The objective of this paper is to put on the map the sustainable technologies for electricity generation in Greece through the formulation of a collective interactive supportive framework, using an existing multi-criteria decision-making (MCDM) method to elaborate more realistic and transparent outcomes. The approach was implemented under the umbrella of the national Foresight Programme, to assist policy making for sustainable electricity generation technologies. [Author].

  9. Beyond computer literacy: supporting youth's positive development through technology.

    Science.gov (United States)

    Bers, Marina Umaschi

    2010-01-01

    In a digital era in which technology plays a role in most aspects of a child's life, having the competence and confidence to use computers might be a necessary step, but not a goal in itself. Developing character traits that will serve children to use technology in a safe way to communicate and connect with others, and providing opportunities for children to make a better world through the use of their computational skills, is just as important. The Positive Technological Development framework (PTD), a natural extension of the computer literacy and the technological fluency movements that have influenced the world of educational technology, adds psychosocial, civic, and ethical components to the cognitive ones. PTD examines the developmental tasks of a child growing up in our digital era and provides a model for developing and evaluating technology-rich youth programs. The explicit goal of PTD programs is to support children in the positive uses of technology to lead more fulfilling lives and make the world a better place. This article introduces the concept of PTD and presents examples of the Zora virtual world program for young people that the author developed following this framework.

  10. Teledesic Global Wireless Broadband Network: Space Infrastructure Architecture, Design Features and Technologies

    Science.gov (United States)

    Stuart, James R.

    1995-01-01

    The Teledesic satellites are a new class of small satellites which demonstrate the important commercial benefits of using technologies developed for other purposes by U.S. National Laboratories. The Teledesic satellite architecture, subsystem design features, and new technologies are described. The new Teledesic satellite manufacturing, integration, and test approaches which use modern high volume production techniques and result in surprisingly low space segment costs are discussed. The constellation control and management features and attendant software architecture features are addressed. After briefly discussing the economic and technological impact on the USA commercial space industries of the space communications revolution and such large constellation projects, the paper concludes with observations on the trend toward future system architectures using networked groups of much smaller satellites.

  11. Technology Integration Initiative In Support of Outage Management

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Weatherby; David Gertman

    2012-07-01

    Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Often, command and control during outages is maintained in the outage control center where many of the underlying technologies supporting outage control are the same as those used in the 1980’s. This research reports on the use of advanced integrating software technologies and hand held mobile devices as a means by which to reduce cycle time, improve accuracy, and enhance transparency among outage team members. This paper reports on the first phase of research supported by the DOE Light Water Reactor Sustainability (LWRS) Program that is performed in close collaboration with industry to examine the introduction of newly available technology allowing for safe and efficient outage performance. It is thought that this research will result in: improved resource management among various plant stakeholder groups, reduced paper work, and enhanced overall situation awareness for the outage control center management team. A description of field data collection methods, including personnel interview data, success factors, end-user evaluation and integration of hand held devices in achieving an integrated design are also evaluated. Finally, the necessity of obtaining operations cooperation support in field studies and technology evaluation is acknowledged.

  12. Advanced Technologies to Improve Closure of Life Support Systems

    Science.gov (United States)

    Barta, Daniel J.

    2016-01-01

    As NASA looks beyond the International Space Station toward long-duration, deep space missions away from Earth, the current practice of supplying consumables and spares will not be practical nor affordable. New approaches are sought for life support and habitation systems that will reduce dependency on Earth and increase mission sustainability. To reduce launch mass, further closure of Environmental Control and Life Support Systems (ECLSS) beyond the current capability of the ISS will be required. Areas of particular interest include achieving higher degrees of recycling within Atmosphere Revitalization, Water Recovery and Waste Management Systems. NASA is currently investigating advanced carbon dioxide reduction processes that surpass the level of oxygen recovery available from the Sabatier Carbon Dioxide Reduction Assembly (CRA) on the ISS. Candidate technologies will potentially improve the recovery of oxygen from about 50% (for the CRA) to as much as 100% for technologies who's end product is solid carbon. Improving the efficiency of water recycling and recovery can be achieved by the addition of advanced technologies to recover water from brines and solid wastes. Bioregenerative technologies may be utilized for water reclaimation and also for the production of food. Use of higher plants will simultaneously benefit atmosphere revitalization and water recovery through photosynthesis and transpiration. The level at which bioregenerative technologies are utilized will depend on their comparative requirements for spacecraft resources including mass, power, volume, heat rejection, crew time and reliability. Planetary protection requirements will need to be considered for missions to other solar system bodies.

  13. 77 FR 40647 - Toward Innovative Spectrum-Sharing Technologies: Wireless Spectrum Research and Development...

    Science.gov (United States)

    2012-07-10

    ... Steering Group (WSRD SSG) Workshop III AGENCY: The National Coordination Office (NCO) for Networking and.... SUMMARY: Representatives from Federal research agencies, private industry, and academia will build on the...: This notice is issued by the National Coordination Office for the Networking and Information Technology...

  14. Remote Access to Wireless Communications Systems Laboratory--New Technology Approach

    Science.gov (United States)

    Kafadarova, Nadezhda; Sotirov, Sotir; Milev, Mihail

    2012-01-01

    Technology nowadays enables the remote access to laboratory equipment and instruments via Internet. This is especially useful in engineering education, where students can conduct laboratory experiment remotely. Such remote laboratory access can enable students to use expensive laboratory equipment, which is not usually available to students. In…

  15. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

  16. Communication Technologies Support to Railway Infrastructure and Operations

    DEFF Research Database (Denmark)

    Sniady, Aleksander

    , which can be used for providing bandwidth-demanding applications, such as video surveillance. All in all, this thesis presents a feasible evolution in the field of railway communications. LTE technology together with the novel heterogeneous architecture may transform railway mobile networks from being...... that LTE offers a significant improvement over GSM-R in terms of transmission capacity and performance. Thus, LTE as a ii railway communication technology would create an opportunity to introduce new business-supporting applications, which could enhance railway operation. The demand for such applications...

  17. The development of a Patient-Identification-Oriented Nursing Shift Exchange Support System using wireless RFID PDA techniques.

    Science.gov (United States)

    Huang, Pin-Jen; She, Chien-Cheng; Chang, Polun

    2005-01-01

    The objectives of this study were to technically testing the feasibility of combining RFID and PDA technologies in nursing care and to develop a support system for the nursing shift exchange, which featured with "Positive Patient Identification" and "Point of Care" for patient's safety and security. The most challenging part for the future work would be to embed the system into the real workflow. Future study would be to examine the practical effectiveness of the system.

  18. The Development of a Patient-Identification-Oriented Nursing Shift Exchange Support System Using Wireless RFID PDA Techniques

    OpenAIRE

    Huang, Pin-Jen; She, Chien-Cheng; Chang, Polun

    2005-01-01

    The objectives of this study were to technically testing the feasibility of combining RFID and PDA technologies in nursing care and to develop a support system for the nursing shift exchange, which featured with “Positive Patient Identification” and “Point of Care” for patient’s safety and security. The most challenging part for the future work would be to embed the system into the real workflow. Future study would be to examine the practical effectiveness of the system....

  19. Understanding wireless communications in public safety : a guidebook to technology, issues, planning, and management. 2nd ed.

    Science.gov (United States)

    2003-01-01

    This guidebook was created to help unravel the confusing issues, terms, and options surrounding wireless communications, particularly as it involves commercially available communications services. The target audience consists of those middle and uppe...

  20. TRENDS IN THE CONVERGENCE OF WIRELESS NETWORKS

    Directory of Open Access Journals (Sweden)

    Daniel SORA

    2011-01-01

    Full Text Available In today’s technological market, there are many types of networks. These networks include wireless personal area networks (WPANs, wireless local area networks (WLANs, wireless metropolitan area networks (WMANs, and cellular networks. A vision of a future convergence of networks envisaged for WPANs, WLANs, WiMax, and cellular networks is presented in this paper.

  1. Smart Home Wireless Sensor Nodes

    DEFF Research Database (Denmark)

    Lynggaard, Per

    Smart homes are further development of intelligent buildings and home automation, where context awareness and autonomous behaviour are added. They are based on a combination of the Internet and emerging technologies like wireless sensor nodes. These wireless sensor nodes are challenging because....... This paper introduces an approach that considerably lowers the wireless sensor node power consumption and the amount of transmitted sensor events. It uses smart objects that include artificial intelligence to efficiently process the sensor event on location and thereby saves the costly wireless...

  2. Launching a Wireless Laptop Program

    Science.gov (United States)

    Grignano, Domenic

    2007-01-01

    In this article, the author, as a technology director for East Rock Magnet School in New Haven, Connecticut, a federal government test site for laptop learning, shares his secrets to a successful implementation of a wireless laptop program: (1) Build a wireless foundation; (2) Do not choose the cheapest model just because of budget; (3) A sturdy…

  3. GRC Supporting Technology for NASA's Advanced Stirling Radioisotope Generator (ASRG)

    Science.gov (United States)

    Schreiber, Jeffrey G.; Thieme, Lanny G.

    2008-01-01

    From 1999-2006, the Glenn Research Center (GRC) supported a NASA project to develop a high-efficiency, nominal 110-We Stirling Radioisotope Generator (SRG110) for potential use on NASA missions. Lockheed Martin was selected as the System Integration Contractor for the SRG110, under contract to the Department of Energy (DOE). The potential applications included deep space missions, and Mars rovers. The project was redirected in 2006 to make use of the Advanced Stirling Convertor (ASC) that was being developed by Sunpower, Inc. under contract to GRC, which would reduce the mass of the generator and increase the power output. This change would approximately double the specific power and result in the Advanced Stirling Radioisotope Generator (ASRG). The SRG110 supporting technology effort at GRC was replanned to support the integration of the Sunpower convertor and the ASRG. This paper describes the ASRG supporting technology effort at GRC and provides details of the contributions in some of the key areas. The GRC tasks include convertor extended-operation testing in air and in thermal vacuum environments, heater head life assessment, materials studies, permanent magnet characterization and aging tests, structural dynamics testing, electromagnetic interference and electromagnetic compatibility characterization, evaluation of organic materials, reliability studies, and analysis to support controller development.

  4. Future of technology to augment patient support in hospitals.

    Science.gov (United States)

    Bers, Marina U; Gonzalez-Heydrich, Joseph; DeMaso, David Ray

    2002-01-01

    This chapter explores the potential of using computer technology to support and augment psychotherapeutic interventions in hospitals, communities and homes. We describe two applications piloted at Children's Hospital Boston. The first pilot explored how patients with pediatric heart disease used the Storytelling Agent Generation Environment (SAGE) computer program to create interactive storytellers and share their personal stories. The second involved youngsters on hemodialysis for end stage renal disease using the Zora graphical multi-user environment to create a virtual city and form a therapeutic virtual community. In this chapter we show how computer technology can be used to help patients explore their identity, cope with their illness and provide mutual support and interaction. We also present design recommendations for future interventions of this kind.

  5. Knowledge Management Technology for Decision Support: an empirical examination

    Directory of Open Access Journals (Sweden)

    Meliha Handzic

    2001-11-01

    Full Text Available This paper reports the results of an empirical examination of the effectiveness of one type of knowledge management technology, namely 'contextual knowledge repository', for supporting individual decision makers in a predictive judgement task context. 31 volunteer subjects participated in the study. The results indicate that a given technology was fairly useful, but insufficient to maximally enhance individual decision making. On one hand, subjects were found to extract more knowledge and make significantly smaller decision errors than their notional naive counterparts. On the other hand, subjects tended to extract less knowledge and make significantly larger decision errors compared to notional optimal counterparts. These findings suggest that individuals could potentially benefit from those knowledge management technologies that would provide additional explicit analytical and procedural knowledge, or those that would facilitate sharing of tacit knowledge through interaction with others. Future research is necessary to address these issues.

  6. Aerospace Communications Technologies in Support of NASA Mission

    Science.gov (United States)

    Miranda, Felix A.

    2016-01-01

    NASA is endeavoring in expanding communications capabilities to enable and enhance robotic and human exploration of space and to advance aero communications here on Earth. This presentation will discuss some of the research and technology development work being performed at the NASA Glenn Research Center in aerospace communications in support of NASAs mission. An overview of the work conducted in-house and in collaboration with academia, industry, and other government agencies (OGA) to advance radio frequency (RF) and optical communications technologies in the areas of antennas, ultra-sensitive receivers, power amplifiers, among others, will be presented. In addition, the role of these and other related RF and optical communications technologies in enabling the NASA next generation aerospace communications architecture will be also discussed.

  7. Space assets, technology and services in support of energy policy

    Science.gov (United States)

    Vasko, C. A.; Adriaensen, M.; Bretel, A.; Duvaux-Bechon, I.; Giannopapa, C. G.

    2017-09-01

    Space can be used as a tool by decision and policy makers in developing, implementing and monitoring various policy areas including resource management, environment, transport, security and energy. This paper focuses on the role of space for the energy policy. Firstly, the paper summarizes the European Union's (EU) main objectives in energy policy enclosed in the Energy Strategy 2020-2030-2050 and demonstrates how space assets can contribute to achieving those objectives. Secondly, the paper addresses how the European Space Agency (ESA) has established multiple initiatives and programs that directly finance the development of space assets, technology and applications that deliver services in support of the EU energy policy and sector. These efforts should be continued and strengthened in order to overcome identified technological challenges. The use of space assets, technology and applications, can help achieve the energy policy objectives for the next decades.

  8. Technology support of the handover: promoting observability, flexibility and efficiency.

    Science.gov (United States)

    Patterson, Emily S

    2012-12-01

    Efforts to standardise data elements and increase the comprehensiveness of information included in patient handovers have produced a growing interest in augmenting the verbal exchange of information with written communications conducted through health information technology (HIT). The aim of this perspective is to offer recommendations to optimise technology support of handovers, based on a review of the relevant scientific literature. Review of the literature on human factors and the study of communication produced three recommendations. The first entails making available "shared knowledge" relevant to the handover and subsequent clinical management with intended and unintended recipients. The second is to create a flexible narrative structure (unstructured text fields) for human-human communications facilitated by technology. The third recommendation is to avoid reliance on real-time data entry during busy periods. Implementing these recommendations is anticipated to increase the observability (the ability to readily determine current status), flexibility, and efficiency of HIT-supported patient handovers. Anticipated benefits of technology-supported handovers include reducing reliance on human memory, increasing the efficiency and structure of the verbal exchange, avoiding readbacks of numeric data, and aiding clinical management following the handover. In cases when verbal handovers are delayed, do not occur, or involve members of the health care team without first-hand access to critical information, making 'common ground' observable for all recipients, creating a flexible narrative structure for communication and avoiding reliance on real-time data entry during the busiest times has implications for HIT design and day to day data entry and management operations. Benefits include increased observability, flexibility, and efficiency of HIT-supported patient handovers.

  9. Principles of wireless access and localization

    CERN Document Server

    Pahlavan, Kaveh

    2013-01-01

    A comprehensive, encompassing and accessible text examining a wide range of key Wireless Networking and Localization technologies This book provides a unified treatment of issues related to all wireless access and wireless localization techniques.  The book reflects principles of design and deployment of infrastructure for wireless access and localization for wide, local, and personal networking.   Description of wireless access methods includes design and deployment of traditional TDMA and CDMA technologies and emerging Long Term Evolution (LTE) techniques for wide area cellular networks, the

  10. Capacity Limit, Link Scheduling and Power Control in Wireless Networks

    Science.gov (United States)

    Zhou, Shan

    2013-01-01

    The rapid advancement of wireless technology has instigated the broad deployment of wireless networks. Different types of networks have been developed, including wireless sensor networks, mobile ad hoc networks, wireless local area networks, and cellular networks. These networks have different structures and applications, and require different…

  11. Impact of wireless link quality across communication layers

    NARCIS (Netherlands)

    Zhou, J.

    2010-01-01

    Nowadays, wireless networks are used in most of the applications with radio technologies being used in all kinds of wireless networks. In all wireless links, the transmitted packets can be lost. How to identify the quality of a certain wireless link and achieve the best delivery performance over a

  12. Reliability Impacts in Life Support Architecture and Technology Selection

    Science.gov (United States)

    Lange Kevin E.; Anderson, Molly S.

    2012-01-01

    Quantitative assessments of system reliability and equivalent system mass (ESM) were made for different life support architectures based primarily on International Space Station technologies. The analysis was applied to a one-year deep-space mission. System reliability was increased by adding redundancy and spares, which added to the ESM. Results were thus obtained allowing a comparison of the ESM for each architecture at equivalent levels of reliability. Although the analysis contains numerous simplifications and uncertainties, the results suggest that achieving necessary reliabilities for deep-space missions will add substantially to the life support ESM and could influence the optimal degree of life support closure. Approaches for reducing reliability impacts were investigated and are discussed.

  13. Research on synthetic decision support technology based on data farming

    Science.gov (United States)

    Shi, Haobin; Yu, Zhujun; Li, Wenbin

    2009-12-01

    In order to solve the problems existed in current decision support system, such as closed, model-oriented, forbidding uncertainty and risk, oriented to analysis of few determined scenario, a novel synthetic decision support system(SDSS) based on data farming is proposed and established in this paper. Taking data warehouse as platform, the SDSS searches unknown information and unexpected knowledge by use of data farming, while data mining is utilized to extract reliable, original and valuable knowledge from large quantities of data. The organic combination of data farming, data mining and data warehouse opens up a new way for research on decision support system, and simulated experiments verify the validity of this technology.

  14. A Multiband OFDMA Heterogeneous Network for Millimeter Wave 5G Wireless Applications

    OpenAIRE

    Niknam, Solmaz; Nasir, Ali A.; Mehrpouyan, Hani; Natarajan, Balasubramaniam

    2016-01-01

    Emerging fifth generation (5G) wireless networks require massive bandwidth in higher frequency bands, extreme network densities, and flexibility of supporting multiple wireless technologies in order to provide higher data rates and seamless coverage. It is expected that utilization of the large bandwidth in the millimeter-wave (mmWave) band and deployment of heterogeneous networks (HetNets) will help address the data rate requirements of 5G networks. However, high pathloss and shadowing in th...

  15. Carrier Current Line Systems Technologies in M2M Architecture for Wireless Communication

    Directory of Open Access Journals (Sweden)

    Hua-Ching Chen

    2016-01-01

    Full Text Available This paper investigates the Carrier Current Line Systems (CCLS technologies of Machine to Machine (M2M architecture which applied for mobile station coverage working with metro, high speed railway, and subway such as analysis for public transport of an indoor transition system. It is based on the theory and practical engineering principle which provide guidelines and formulas for link budget design to help designers fully control and analyze the single output power of uplink and downlink between Fiber Repeaters (FR and mobile station as well as base station. Finally, the results of this leakage cable system are successfully applied to indoor coverage design for metro rapid transit system which are easily installed cellular over fiber solutions for WCDMA/LTE access is becoming Ubiquitous Network to Internet of Thing (IOT real case hierarchy of telecommunication.

  16. The Virtual Learning Commons: Supporting Science Education with Emerging Technologies

    Science.gov (United States)

    Pennington, D. D.; Gandara, A.; Gris, I.

    2012-12-01

    The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of Semantic Web, mash up, and social networking tools that supports knowledge sharing and innovation across scientific disciplines in research and education communities and networks. The explosion of scientific resources (data, models, algorithms, tools, and cyberinfrastructure) challenges the ability of educators to be aware of resources that might be relevant to their classes. Even when aware, it can be difficult to understand enough about those resources to develop classroom materials. Often emerging data and technologies have little documentation, especially about their application. The VLC tackles this challenge by providing mechanisms for individuals and groups of educators to organize Web resources into virtual collections, and engage each other around those collections in order to a) learn about potentially relevant resources that are available; b) design classes that leverage those resources; and c) develop course syllabi. The VLC integrates Semantic Web functionality for structuring distributed information, mash up functionality for retrieving and displaying information, and social media for discussing/rating information. We are working to provide three views of information that support educators in different ways: 1. Innovation Marketplace: supports users as they find others teaching similar courses, where they are located, and who they collaborate with; 2. Conceptual Mapper: supports educators as they organize their thinking about the content of their class and related classes taught by others; 3. Curriculum Designer: supports educators as they generate a syllabus and find Web resources that are relevant. This presentation will discuss the innovation and learning theories that have informed design of the VLC, hypotheses about the use of emerging technologies to support innovation in classrooms, and will include a

  17. Third Generation Telephony: New Technological Support for Computer Assisted Language Learning

    OpenAIRE

    Jose Carlos Garcia Cabrero

    2002-01-01

    The expansion of the lnternet has Ied to the development of distance teaching models based on the net (e learning). One of the crucial factors in this phenomenon is the continuous training required by workers to maintain or improve their professional skills. Foreign languages are, without doubt, one of the most in demand subjects. This is because they are needed for comunication in an increasingly globalized world. The development of new wireless communication technologies, UMTS or 3G n...

  18. Introduction to Ultra Wideband for Wireless Communications

    DEFF Research Database (Denmark)

    Nikookar, Homayoun; Prasad, Ramjee

    Ultra Wideband (UWB) Technology is the cutting edge technology for wireless communications with a wide range of applications. In Introduction to Ultra Wideband for Wireless Communications UWB principles and technologies for wireless communications are explained clearly. Key issues such as UWB...... wireless channels, interference, signal processing as well as applications and standardization activities are addressed. Introduction to Ultra Wideband for Wireless Communications provides easy-to-understand material to (graduate) students and researchers working in the field of commercial UWB wireless...... communications. Due to tutorial nature of the book it can also be adopted as a textbook on the subject in the Telecommunications Engineering curriculum. Problems at the end of each chapter extend the reader's understanding of the subject. Introduction to Ultra Wideband for Wireless Communications will aslo...

  19. Introduction to Ultra Wideband for Wireless Communications

    DEFF Research Database (Denmark)

    Nikookar, Homayoun; Prasad, Ramjee

    communications. Due to tutorial nature of the book it can also be adopted as a textbook on the subject in the Telecommunications Engineering curriculum. Problems at the end of each chapter extend the reader's understanding of the subject. Introduction to Ultra Wideband for Wireless Communications will aslo......Ultra Wideband (UWB) Technology is the cutting edge technology for wireless communications with a wide range of applications. In Introduction to Ultra Wideband for Wireless Communications UWB principles and technologies for wireless communications are explained clearly. Key issues such as UWB...... wireless channels, interference, signal processing as well as applications and standardization activities are addressed. Introduction to Ultra Wideband for Wireless Communications provides easy-to-understand material to (graduate) students and researchers working in the field of commercial UWB wireless...

  20. Cross-Layer Measurement on an IEEE 802.11g Wireless Network Supporting MPEG-2 Video Streaming Applications in the Presence of Interference

    Directory of Open Access Journals (Sweden)

    Alessandro Sona

    2010-01-01

    Full Text Available The performance of wireless local area networks supporting video streaming applications, based on MPEG-2 video codec, in the presence of interference is here dealt with. IEEE 802.11g standard wireless networks, that do not support QoS in according with IEEE 802.11e standard, are, in particular, accounted for and Bluetooth signals, additive white Gaussian noise, and competitive data traffic are considered as sources of interference. The goal is twofold: from one side, experimentally assessing and correlating the values that some performance metrics assume at the same time at different layers of an IEEE 802.11g WLAN delivering video streaming in the presence of in-channel interference; from the other side, deducing helpful and practical hints for designers and technicians, in order to efficiently assess and enhance the performance of an IEEE 802.11g WLAN supporting video streaming in some suitable setup conditions and in the presence of interference. To this purpose, an experimental analysis is planned following a cross-layer measurement approach, and a proper testbed within a semianechoic chamber is used. Valuable results are obtained in terms of signal-to-interference ratio, packet loss ratio, jitter, video quality, and interference data rate; helpful hints for designers and technicians are finally gained.

  1. Wireless communications resource management

    CERN Document Server

    Lee, B; Seo, H

    2009-01-01

    Wireless technologies continue to evolve to address the insatiable demand for faster response times, larger bandwidth, and reliable transmission. Yet as the industry moves toward the development of post 3G systems, engineers have consumed all the affordable physical layer technologies discovered to date. This has necessitated more intelligent and optimized utilization of available wireless resources. Wireless Communications Resource Managem ent, Lee, Park, and Seo cover all aspects of this critical topic, from the preliminary concepts and mathematical tools to detailed descriptions of all the resource management techniques. Readers will be able to more effectively leverage limited spectrum and maximize device battery power, as well as address channel loss, shadowing, and multipath fading phenomena.

  2. Routing and Scheduling Algorithms for WirelessHART Networks: A Survey

    Science.gov (United States)

    Nobre, Marcelo; Silva, Ivanovitch; Guedes, Luiz Affonso

    2015-01-01

    Wireless communication is a trend nowadays for the industrial environment. A number of different technologies have emerged as solutions satisfying strict industrial requirements (e.g., WirelessHART, ISA100.11a, WIA-PA). As the industrial environment presents a vast range of applications, adopting an adequate solution for each case is vital to obtain good performance of the system. In this context, the routing and scheduling schemes associated with these technologies have a direct impact on important features, like latency and energy consumption. This situation has led to the development of a vast number of routing and scheduling schemes. In the present paper, we focus on the WirelessHART technology, emphasizing its most important routing and scheduling aspects in order to guide both end users and the developers of new algorithms. Furthermore, we provide a detailed literature review of the newest routing and scheduling techniques for WirelessHART, discussing each of their features. These routing algorithms have been evaluated in terms of their objectives, metrics, the usage of the WirelessHART structures and validation method. In addition, the scheduling algorithms were also evaluated by metrics, validation, objectives and, in addition, by multiple superframe support, as well as by the redundancy method used. Moreover, this paper briefly presents some insights into the main WirelessHART simulation modules available, in order to provide viable test platforms for the routing and scheduling algorithms. Finally, some open issues in WirelessHART routing and scheduling algorithms are discussed. PMID:25919371

  3. Green Wireless Power Transfer Networks

    NARCIS (Netherlands)

    Liu, Q.; Golinnski, M.; Pawelczak, P.; Warnier, M.

    2016-01-01

    wireless power transfer network (WPTN) aims to support devices with cable-less energy on-demand. Unfortunately, wireless power transfer itself-especially through radio frequency radiation rectification-is fairly inefficient due to decaying power with distance, antenna polarization, etc.

  4. Energy efficient wireless ATM design

    NARCIS (Netherlands)

    Havinga, Paul J.M.; Smit, Gerardus Johannes Maria; Bos, M.

    1999-01-01

    Energy efficiency is an important issue for mobile computers since they must rely on their batteries. We present an architecture for wireless ATM and a novel MAC protocol that achieves a good energy efficiency of the wireless interface of the mobile and provides QoS support for diverse traffic

  5. Energy-efficient wireless communication

    NARCIS (Netherlands)

    Havinga, Paul J.M.

    2000-01-01

    In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth

  6. Scaling Impacts in Life Support Architecture and Technology Selection

    Science.gov (United States)

    Lange, Kevin

    2016-01-01

    For long-duration space missions outside of Earth orbit, reliability considerations will drive higher levels of redundancy and/or on-board spares for life support equipment. Component scaling will be a critical element in minimizing overall launch mass while maintaining an acceptable level of system reliability. Building on an earlier reliability study (AIAA 2012-3491), this paper considers the impact of alternative scaling approaches, including the design of technology assemblies and their individual components to maximum, nominal, survival, or other fractional requirements. The optimal level of life support system closure is evaluated for deep-space missions of varying duration using equivalent system mass (ESM) as the comparative basis. Reliability impacts are included in ESM by estimating the number of component spares required to meet a target system reliability. Common cause failures are included in the analysis. ISS and ISS-derived life support technologies are considered along with selected alternatives. This study focusses on minimizing launch mass, which may be enabling for deep-space missions.

  7. A data-management system using sensor technology and wireless devices for port security

    Science.gov (United States)

    Saldaña, Manuel; Rivera, Javier; Oyola, Jose; Manian, Vidya

    2014-05-01

    Sensor technologies such as infrared sensors and hyperspectral imaging, video camera surveillance are proven to be viable in port security. Drawing from sources such as infrared sensor data, digital camera images and processed hyperspectral images, this article explores the implementation of a real-time data delivery system. In an effort to improve the manner in which anomaly detection data is delivered to interested parties in port security, this system explores how a client-server architecture can provide protected access to data, reports, and device status. Sensor data and hyperspectral image data will be kept in a monitored directory, where the system will link it to existing users in the database. Since this system will render processed hyperspectral images that are dynamically added to the server - which often occupy a large amount of space - the resolution of these images is trimmed down to around 1024×768 pixels. Changes that occur in any image or data modification that originates from any sensor will trigger a message to all users that have a relation with the aforementioned. These messages will be sent to the corresponding users through automatic email generation and through a push notification using Google Cloud Messaging for Android. Moreover, this paper presents the complete architecture for data reception from the sensors, processing, storage and discusses how users of this system such as port security personnel can use benefit from the use of this service to receive secure real-time notifications if their designated sensors have detected anomalies and/or have remote access to results from processed hyperspectral imagery relevant to their assigned posts.

  8. TUTOR SUPPORT OF TEACHING MATHEMATICS WITH INFORMATION AND COMMUNICATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Kateryna P. Osadcha

    2017-10-01

    Full Text Available The paper describes the tutor activity in the process of mathematics teaching support on the basis of the use of information and communication technologies (ICT. The author has analysed the available Internet resources and mobile applications in mathematics, which are classified according to their functional purposes into groups: systems of mass open courses, platforms for adaptive learning, video channels, mathematical online simulators, online tasks, mathematical games, mathematical portals, online platforms, mathematical sites, mathematical online platforms, mathematical services, mobile applications in mathematics (simulators, games, generators of example, assistant programs, training complexes, calculators. In accordance with the student age categories mathematical information and communication technologies are divided into three groups: for elementary school students, secondary school students and high school students. The basic ICT tools for teaching mathematics are outlined. The algorithm for constructing tutorial classes with their application is presented.

  9. Developing Effluent Analysis Technologies to Support Nonproliferation Initiatives, Arms Control and Nonproliferation Technologies, Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, S A; Staehle, G; Alonzo, G M [eds.

    1995-01-01

    This issue provides an overview of the Effluent Research Program of the DOE Office of Research and Development, highlighting a number of representative projects within this program in support of nonproliferation initiatives. Technologies reported include portable instruments for on-site inspections, standoff detectors, fieldable, real-time instruments, field collection techniques, and ultrasensitive laboratory techniques.

  10. Development of Beam Utilization Technologies and Support for Users

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyeryung; Jung, Myunghwan; Noh, Yongoh; Lee, Sooyeon; Kim, Hyukwook; Kil, Jaekeun; Lee, Nayoung; Ra, Sekin; Lee, Miejeen; Kim, Sora

    2013-02-15

    The Final goals are to achieve the 2nd goals of the Proton Engineering Frontier Project, development of proton beam utilization technologies, to incubate the potential users, and to develop fundamental technologies. Based on these achievements, we are going to enhance the accelerator utilization and maximize contribution to the local society after accelerator construction completion. For the these goals, we were operating user program reflecting the results of 3rd step planning. We support 38 small projects during 2 years. As results of activation of beam utilization, we acquired 768 users at the end of 2012. We survey proton beam technology proposals, individuals and institutions participation letter of intent through the research of 'Planning of a support program for both basic research by using accelerator and manpower cultivation'. And inaugurated KOPUA (Korea Proton Accelerator User Association) on March 28, 2012 with 152 members. We secured experimental conditions at TR23 and TR103 and reflected in the target room design and operation scenarios via investigate the requirements. Through these requirements, we make a remote sample transfer system, beam regulating system, hot cell and sample transport container. Moreover, we develop proton beam technologies such as in-vivo proton beam irradiation system, comparison of the biological effects for pulse beam and continuous beam, basic experiments for the metal nanopaticle synthesis, research for radioactivatied samples and devices, conceptual design and calculation for neutron source target and calculation of the isotope production yield. Proton accelerator can be utilized in a variety of field, including NT, BT, IT, ST, ET, Nuclear, medical, and some of the user facilities required were constructed through this project, Experience for the construction and operation of these facilities can be reflected to the construction of the rest 8 target room of proton accelerator center.

  11. Development of fast wireless detection system for fixed offshore platform

    Science.gov (United States)

    Li, Zhigang; Yu, Yan; Jiao, Dong; Wang, Jie; Li, Zhirui; Ou, Jinping

    2011-04-01

    Offshore platforms' security is concerned since in 1950s and 1960s, and in the early 1980s some important specifications and standards are built, and all these provide technical basis of fixed platform design, construction, installation and evaluation. With the condition that more and more platforms are in serving over age, the research about the evaluation and detection technology of offshore platform has been a hotspot, especially underwater detection, and assessment method based on the finite element calculation. For fixed platform structure detection, conventional NDT methods, such as eddy current, magnetic powder, permeate, X-ray and ultrasonic, etc, are generally used. These techniques are more mature, intuitive, but underwater detection needs underwater robot, the necessary supporting tools of auxiliary equipment, and trained professional team, thus resources and cost used are considerable, installation time of test equipment is long. This project presents a new kind of fast wireless detection and damage diagnosis system for fixed offshore platform using wireless sensor networks, that is, wireless sensor nodes can be put quickly on the offshore platform, detect offshore platform structure global status by wireless communication, and then make diagnosis. This system is operated simply, suitable for offshore platform integrity states rapid assessment. The designed system consists in intelligence acquisition equipment and 8 wireless collection nodes, the whole system has 64 collection channels, namely every wireless collection node has eight 16-bit accuracy of A/D channels. Wireless collection node, integrated with vibration sensing unit, embedded low-power micro-processing unit, wireless transceiver unit, large-capacity power unit, and GPS time synchronization unit, can finish the functions such as vibration data collection, initial analysis, data storage, data wireless transmission. Intelligence acquisition equipment, integrated with high

  12. Wireless Sensors and Networks for Advanced Energy Management

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, J.E.

    2005-05-06

    Numerous national studies and working groups have identified low-cost, very low-power wireless sensors and networks as a critical enabling technology for increasing energy efficiency, reducing waste, and optimizing processes. Research areas for developing such sensor and network platforms include microsensor arrays, ultra-low power electronics and signal conditioning, data/control transceivers, and robust wireless networks. A review of some of the research in the following areas will be discussed: (1) Low-cost, flexible multi-sensor array platforms (CO{sub 2}, NO{sub x}, CO, humidity, NH{sub 3}, O{sub 2}, occupancy, etc.) that enable energy and emission reductions in applications such as buildings and manufacturing; (2) Modeling investments (energy usage and savings to drive capital investment decisions) and estimated uptime improvements through pervasive gathering of equipment and process health data and its effects on energy; (3) Robust, self-configuring wireless sensor networks for energy management; and (4) Quality-of-service for secure and reliable data transmission from widely distributed sensors. Wireless communications is poised to support technical innovations in the industrial community, with widespread use of wireless sensors forecasted to improve manufacturing production and energy efficiency and reduce emissions. Progress being made in wireless system components, as described in this paper, is helping bring these projected improvements to reality.

  13. OPTICAL WIRELESS COMMUNICATION SYSTEM

    Directory of Open Access Journals (Sweden)

    JOSHUA L.Y. CHIENG

    2016-02-01

    Full Text Available The growing demand of bandwidth in this modern internet age has been testing the existing telecommunication infrastructures around the world. With broadband speeds moving towards the region of Gbps and Tbps, many researches have begun on the development of using optical wireless technology as feasible and future methods to the current wireless technology. Unlike the existing radio frequency wireless applications, optical wireless uses electromagnetic spectrums that are unlicensed and free. With that, this project aim to understand and gain better understanding of optical wireless communication system by building an experimental and simulated model. The quality of service and system performance will be investigated and reviewed. This project employs laser diode as the propagation medium and successfully transferred audio signals as far as 15 meters. On its quality of service, results of the project model reveal that the bit error rate increases, signal-to-noise ratio and quality factor decreases as the link distance between the transmitter and receiver increases. OptiSystem was used to build the simulated model and MATLAB was used to assist signal-to-noise ratio calculations. By comparing the simulated and experimental receiver’s power output, the experimental model’s efficiency is at 66.3%. Other than the system’s performance, challenges and factors affecting the system have been investigated and discussed. Such challenges include beam divergence, misalignment and particle absorption.

  14. Technology-Supported Art as a "Way to Participation"

    Directory of Open Access Journals (Sweden)

    Molly Bathje MS, OTR/L

    2014-04-01

    Full Text Available Brianna Vitale provided the painting featured on the cover of the Spring 2014 issue of The Open Journal of Occupational Therapy. Brianna completed the painting, titled “Flamingo,” using a mouth joystick (joust to draw the image on her computer and an assistive device to translate her computer artwork into the watercolor painting. At 12 years old, Brianna has been living for the past 9 years with tetraplegia, the result of a spinal cord injury (SCI. Through technology and with the support of family, friends, and health care professionals, Brianna energetically engages in a variety of creative, social, and philanthropic activities.

  15. Scalability limitations of VIA-based technologies in supporting MPI

    Energy Technology Data Exchange (ETDEWEB)

    BRIGHTWELL,RONALD B.; MACCABE,ARTHUR BERNARD

    2000-04-17

    This paper analyzes the scalability limitations of networking technologies based on the Virtual Interface Architecture (VIA) in supporting the runtime environment needed for an implementation of the Message Passing Interface. The authors present an overview of the important characteristics of VIA and an overview of the runtime system being developed as part of the Computational Plant (Cplant) project at Sandia National Laboratories. They discuss the characteristics of VIA that prevent implementations based on this system to meet the scalability and performance requirements of Cplant.

  16. Advanced intelligent computational technologies and decision support systems

    CERN Document Server

    Kountchev, Roumen

    2014-01-01

    This book offers a state of the art collection covering themes related to Advanced Intelligent Computational Technologies and Decision Support Systems which can be applied to fields like healthcare assisting the humans in solving problems. The book brings forward a wealth of ideas, algorithms and case studies in themes like: intelligent predictive diagnosis; intelligent analyzing of medical images; new format for coding of single and sequences of medical images; Medical Decision Support Systems; diagnosis of Down’s syndrome; computational perspectives for electronic fetal monitoring; efficient compression of CT Images; adaptive interpolation and halftoning for medical images; applications of artificial neural networks for real-life problems solving; present and perspectives for Electronic Healthcare Record Systems; adaptive approaches for noise reduction in sequences of CT images etc.

  17. In Situ Resource Utilization Technology Research and Facilities Supporting the NASA's Human Systems Research and Technology Life Support Program

    Science.gov (United States)

    Schlagheck, Ronald A.; Sibille, Laurent; Sacksteder, Kurt; Owens, Chuck

    2005-01-01

    The NASA Microgravity Science program has transitioned research required in support of NASA s Vision for Space Exploration. Research disciplines including the Materials Science, Fluid Physics and Combustion Science are now being applied toward projects with application in the planetary utilization and transformation of space resources. The scientific and engineering competencies and infrastructure in these traditional fields developed at multiple NASA Centers and by external research partners provide essential capabilities to support the agency s new exploration thrusts including In-Situ Resource Utilization (ISRU). Among the technologies essential to human space exploration, the production of life support consumables, especially oxygen and; radiation shielding; and the harvesting of potentially available water are realistically achieved for long-duration crewed missions only through the use of ISRU. Ongoing research in the physical sciences have produced a body of knowledge relevant to the extraction of oxygen from lunar and planetary regolith and associated reduction of metals and silicon for use meeting manufacturing and repair requirements. Activities being conducted and facilities used in support of various ISRU projects at the Glenn Research Center and Marshall Space Flight Center will be described. The presentation will inform the community of these new research capabilities, opportunities, and challenges to utilize their materials, fluids and combustion science expertise and capabilities to support the vision for space exploration.

  18. Wireless, Not Penniless.

    Science.gov (United States)

    Schaeffer, Brett

    2003-01-01

    Describes some advantages of the early adoption of wireless, laptop, and personal digital assistant (PDA) technology. Provides examples of early adoption experiences in several school districts. Advantages include increased computer access, timesavings, and expanded curricular offerings. Also highlights potential cost savings involving, for…

  19. Wired vs. Wireless.

    Science.gov (United States)

    Fielding, Randall

    2000-01-01

    Presents a debate on which technology will be in tomorrow's classrooms and the pros and cons of wiring classrooms and using a wireless network. Concluding comments address the likelihood, and desirability, of placing computers throughout the entire educational process and what types of computers and capabilities are needed. (GR)

  20. Investigating Wireless Power Transfer

    Science.gov (United States)

    St. John, Stuart A.

    Understanding Physics is a great end in itself, but is also crucial to keep pace with developments in modern technology. Wireless power transfer, known to many only as a means to charge electric toothbrushes, will soon be commonplace in charging phones, electric cars and implanted medical devices. This article outlines how to produce and use a…

  1. Investigating Wireless Power Transfer

    Science.gov (United States)

    St. John, Stuart A.

    2017-01-01

    Understanding Physics is a great end in itself, but is also crucial to keep pace with developments in modern technology. Wireless power transfer, known to many only as a means to charge electric toothbrushes, will soon be commonplace in charging phones, electric cars and implanted medical devices. This article outlines how to produce and use a…

  2. Wireless Internet

    NARCIS (Netherlands)

    el Zarki, M.; Heijenk, Geert; Lee, Kenneth S.; Bidgoli, H.

    This chapter addresses the topic of wireless Internet, the extension of the wireline Internet architecture to the wireless domain. As such the chapter introduces the reader to the dominant characteristics of the Internet, from its structure to the protocols that control the forwarding of data and

  3. THIRD GENERATION TELEPHONY: NEW TECHNOLOGICAL SUPPORT FOR COMPUTER ASSISTED LANGUAGE LEARNING

    Directory of Open Access Journals (Sweden)

    Jose Carlos Garcia Cabrero

    2002-06-01

    Full Text Available The expansion of the lnternet has Ied to the development of distance teaching models based on the net (e learning. One of the crucial factors in this phenomenon is the continuous training required by workers to maintain or improve their professional skills. Foreign languages are, without doubt, one of the most in demand subjects. This is because they are needed for comunication in an increasingly globalized world. The development of new wireless communication technologies, UMTS or 3G nets, and their corresponding access terminals (Palm-size PCs, PPCs, with wireless telephone connection. also called smart-phones. will enable solutions to be found for some of the problems Iaeed hy current e-learning users. These problems include access speed and the physical constraints of tlhe ( The new wireless comunication technologies will bring other benefits like portability. always on-line, etc. This article presents one on' the world's first prototypes of language learning software or smart-phones, produced by the Laboratorio de lngenieria Didactica e lngenieria Linguistica of UNED (Didactic Engineering and Linguistic Engineering Laboratory (LIDIL, http://www.vip.~ined.es. i¿le Enl

  4. Using information technology to support knowledge conversion processes

    Directory of Open Access Journals (Sweden)

    2001-01-01

    Full Text Available One of the main roles of Information Technology in Knowledge Management programs is to accelerate the speed of knowledge transfer and creation. The Knowledge Management tools intend to help the processes of collecting and organizing the knowledge of groups of individuals in order to make this knowledge available in a shared base. Due to the largeness of the concept of knowledge, the software market for Knowledge Management seems to be quite confusing. Technology vendors are developing different implementations of the Knowledge Management concepts in their software products. Because of the variety and quantity of Knowledge Management tools available on the market, a typology may be a valuable aid to organizations that are looking for answers to specific needs. The objective of this article is to present guidelines that help to design such a typology. Knowledge Management solutions such as intranet systems, Electronic Document Management (EDM, groupware, workflow, artificial intelligence-based systems, Business Intelligence (BI, knowledge map systems, innovation support, competitive intelligence tools and knowledge portals are discussed in terms of their potential contributions to the processes of creating, registering and sharing knowledge. A number of Knowledge Management tools (Lotus Notes, Microsoft Exchange, Business Objects, Aris Toolset, File Net, Gingo, Vigipro, Sopheon have been checked. The potential of each category of solutions to support the transfer of tacit and/or explicit knowledge and to facilitate the knowledge conversion spiral in the sense of Nonaka and Takeuchi (1995 is discussed.

  5. Arctic Glass: Innovative Consumer Technology in Support of Arctic Research

    Science.gov (United States)

    Ruthkoski, T.

    2015-12-01

    The advancement of cyberinfrastructure on the North Slope of Alaska is drastically limited by location-specific conditions, including: unique geophysical features, remoteness of location, and harsh climate. The associated cost of maintaining this unique cyberinfrastructure also becomes a limiting factor. As a result, field experiments conducted in this region have historically been at a technological disadvantage. The Arctic Glass project explored a variety of scenarios where innovative consumer-grade technology was leveraged as a lightweight, rapidly deployable, sustainable, alternatives to traditional large-scale Arctic cyberinfrastructure installations. Google Glass, cloud computing services, Internet of Things (IoT) microcontrollers, miniature LIDAR, co2 sensors designed for HVAC systems, and portable network kits are several of the components field-tested at the Toolik Field Station as part of this project. Region-specific software was also developed, including a multi featured, voice controlled Google Glass application named "Arctic Glass". Additionally, real-time sensor monitoring and remote control capability was evaluated through the deployment of a small cluster of microcontroller devices. Network robustness was analyzed as the devices delivered streams of abiotic data to a web-based dashboard monitoring service in near real time. The same data was also uploaded synchronously by the devices to Amazon Web Services. A detailed overview of solutions deployed during the 2015 field season, results from experiments utilizing consumer sensors, and potential roles consumer technology could play in support of Arctic science will be discussed.

  6. Immediate Feedback on Accuracy and Performance: The Effects of Wireless Technology on Food Safety Tracking at a Distribution Center

    Science.gov (United States)

    Goomas, David T.

    2012-01-01

    The effects of wireless ring scanners, which provided immediate auditory and visual feedback, were evaluated to increase the performance and accuracy of order selectors at a meat distribution center. The scanners not only increased performance and accuracy compared to paper pick sheets, but were also instrumental in immediate and accurate data…

  7. Robotic Lunar Rover Technologies and SEI Supporting Technologies at Sandia National Laboratories

    Science.gov (United States)

    Klarer, Paul R.

    1992-01-01

    Existing robotic rover technologies at Sandia National Laboratories (SNL) can be applied toward the realization of a robotic lunar rover mission in the near term. Recent activities at the SNL-RVR have demonstrated the utility of existing rover technologies for performing remote field geology tasks similar to those envisioned on a robotic lunar rover mission. Specific technologies demonstrated include low-data-rate teleoperation, multivehicle control, remote site and sample inspection, standard bandwidth stereo vision, and autonomous path following based on both internal dead reckoning and an external position location update system. These activities serve to support the use of robotic rovers for an early return to the lunar surface by demonstrating capabilities that are attainable with off-the-shelf technology and existing control techniques. The breadth of technical activities at SNL provides many supporting technology areas for robotic rover development. These range from core competency areas and microsensor fabrication facilities, to actual space qualification of flight components that are designed and fabricated in-house.

  8. Wireless telecommunication systems

    CERN Document Server

    Terré, Michel; Vivier, Emmanuelle

    2013-01-01

    Wireless telecommunication systems generate a huge amount of interest. In the last two decades, these systems have experienced at least three major technological leaps, and it has become impossible to imagine how society was organized without them. In this book, we propose a macroscopic approach on wireless systems, and aim at answering key questions about power, data rates, multiple access, cellular engineering and access networks architectures.We present a series of solved problems, whose objective is to establish the main elements of a global link budget in several radiocommunicati

  9. Emerging wireless networks concepts, techniques and applications

    CERN Document Server

    Makaya, Christian

    2011-01-01

    An authoritative collection of research papers and surveys, Emerging Wireless Networks: Concepts, Techniques, and Applications explores recent developments in next-generation wireless networks (NGWNs) and mobile broadband networks technologies, including 4G (LTE, WiMAX), 3G (UMTS, HSPA), WiFi, mobile ad hoc networks, mesh networks, and wireless sensor networks. Focusing on improving the performance of wireless networks and provisioning better quality of service and quality of experience for users, it reports on the standards of different emerging wireless networks, applications, and service fr

  10. Wireless Sensor Needs Defined by SBIR Topics

    Science.gov (United States)

    Studor, George F.

    2010-01-01

    This slide presentation reviews the needs for wireless sensor technology from various U.S. government agencies as exhibited by an analysis of Small Business Innovation Research (SBIR) solicitations. It would appear that a multi-agency group looking at overlapping wireless sensor needs and technology projects is desired. Included in this presentation is a review of the NASA SBIR process, and an examination of some of the SBIR projects from NASA, and other agencies that involve wireless sensor development

  11. Wired or Wireless Internet?

    DEFF Research Database (Denmark)

    Gimpel, Gregory

    2010-01-01

    This paper finds that network externalities play a minimal role in the choice of internet access technology. Potential adopters of mobile laptop internet view broadband technology as a black box, the technological details of which donot matter. The study uses qualitative techniques to explore how...... the speed of technological obsolescence, market share dominance, and the black boxing of technology influence consumer intention to adopt WiMax and 3G wireless internet for their laptop computers. The results, implications for industry, and areas for further research are discussed....

  12. Smart home technologies for health and social care support.

    Science.gov (United States)

    Martin, Suzanne; Kelly, Greg; Kernohan, W George; McCreight, Bernadette; Nugent, Christopher

    2008-10-08

    The integration of smart home technology to support health and social care is acquiring an increasing global significance. Provision is framed within the context of a rapidly changing population profile, which is impacting on the number of people requiring health and social care, workforce availability and the funding of healthcare systems. To explore the effectiveness of smart home technologies as an intervention for people with physical disability, cognitive impairment or learning disability, who are living at home, and to consider the impact on the individual's health status and on the financial resources of health care. We searched the following databases for primary studies: (a) the Cochrane Effective Practice and Organisation of Care (EPOC) Group Register, (b) the Cochrane Central Register of Controlled Trials (CENTRAL), (The Cochrane Library, issue 1, 2007), and (c) bibliographic databases, including MEDLINE (1966 to March 2007), EMBASE (1980 to March 2007) and CINAHL (1982 to March 2007). We also searched the Database of Abstracts of Reviews of Effectiveness (DARE). We searched the electronic databases using a strategy developed by the EPOC Trials Search Co-ordinator. We included randomised controlled trials (RCTs), quasi-experimental studies, controlled before and after studies (CBAs) and interrupted time series analyses (ITS). Participants included adults over the age of 18, living in their home in a community setting. Participants with a physical disability, dementia or a learning disability were included. The included interventions were social alarms, electronic assistive devices, telecare social alert platforms, environmental control systems, automated home environments and 'ubiquitous homes'. Outcome measures included any objective measure that records an impact on a participant's quality of life, healthcare professional workload, economic outcomes, costs to healthcare provider or costs to participant. We included measures of service satisfaction

  13. A Framework for Planning a Unified Wired and Wireless ICT Infrastructure

    DEFF Research Database (Denmark)

    Riaz, M. Tahir; Nielsen, Rasmus Hjorth; Pedersen, Jens Myrup

    2010-01-01

    The increase in the use of information and communication technology (ICT) has pushed the existing access networks to their limits. Whole new access networks are currently being deployed and are expected to fully support the already started synergy of services converging on to one network. Through...... a brief survey of synergy and technology trends, it is concluded that a future network will use wired and wireless as complementary technologies. In this context the paper proposes a framework for planning of unified wired and wireless ICT infrastructures. The framework includes different input parameters...

  14. Application of Telemedicine Technologies to Long Term Spaceflight Support

    Science.gov (United States)

    Orlov, O. I.; Grigoriev, A. I.

    projects on space biology and medicine at the modern high level. In spite of the ISS international cooperation transparency space research programs require to follow the biomedicine ethics and provide confidentiality of the special medical information exchange. That can be achieved in the telemedicine support system built on the network principle. Presently we have all technical facilities needed to create such a system. In Russia activities on space telemedicicine support improvement are carried out by the State Scientific Center of the Russian Federation - Institute for Biomedical Problems of the Russian Academy of Sciences, Mission Control Center of the Russian Aviation and Space Agency, Space Biomedical Center for Training and Research and Yu. Gagarin Cosmonaut Training Center. Communications development and next generation Internet systems creation almost eliminate differences in the types of information technologies implementation both in the earth-based and near-earth space conditions. In prospect of the information community creation the telecommunication system of the near-earth space objects and its telemedicine element will become a natural part of the Earth unified information field that will open unlimited perspectives for flight support system improvement and space biomedical research conducting. Russia has unique data of numerous investigations on simulation of long, up to a year, effects of space flight factors on the human body. The sphere of situations studied by space medicine specialists embraced orbit manned space flights of the escalating duration (438 days in 1995). However a number of biomedical problems related to space flights didn't face optimal solutions. It's evident that during a space flight to Mars biomedical problems will be much more difficult in comparison with those of the orbit flights of the same duration. The summed up factors of such flights specify a level of the total medical risk that require assessment and application of

  15. Unified Compact ECC-AES Co-Processor with Group-Key Support for IoT Devices in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Luis Parrilla

    2018-01-01

    Full Text Available Security is a critical challenge for the effective expansion of all new emerging applications in the Internet of Things paradigm. Therefore, it is necessary to define and implement different mechanisms for guaranteeing security and privacy of data interchanged within the multiple wireless sensor networks being part of the Internet of Things. However, in this context, low power and low area are required, limiting the resources available for security and thus hindering the implementation of adequate security protocols. Group keys can save resources and communications bandwidth, but should be combined with public key cryptography to be really secure. In this paper, a compact and unified co-processor for enabling Elliptic Curve Cryptography along to Advanced Encryption Standard with low area requirements and Group-Key support is presented. The designed co-processor allows securing wireless sensor networks with independence of the communications protocols used. With an area occupancy of only 2101 LUTs over Spartan 6 devices from Xilinx, it requires 15% less area while achieving near 490% better performance when compared to cryptoprocessors with similar features in the literature.

  16. Unified Compact ECC-AES Co-Processor with Group-Key Support for IoT Devices in Wireless Sensor Networks.

    Science.gov (United States)

    Parrilla, Luis; Castillo, Encarnación; López-Ramos, Juan A; Álvarez-Bermejo, José A; García, Antonio; Morales, Diego P

    2018-01-16

    Security is a critical challenge for the effective expansion of all new emerging applications in the Internet of Things paradigm. Therefore, it is necessary to define and implement different mechanisms for guaranteeing security and privacy of data interchanged within the multiple wireless sensor networks being part of the Internet of Things. However, in this context, low power and low area are required, limiting the resources available for security and thus hindering the implementation of adequate security protocols. Group keys can save resources and communications bandwidth, but should be combined with public key cryptography to be really secure. In this paper, a compact and unified co-processor for enabling Elliptic Curve Cryptography along to Advanced Encryption Standard with low area requirements and Group-Key support is presented. The designed co-processor allows securing wireless sensor networks with independence of the communications protocols used. With an area occupancy of only 2101 LUTs over Spartan 6 devices from Xilinx, it requires 15% less area while achieving near 490% better performance when compared to cryptoprocessors with similar features in the literature.

  17. Supporting translational research on inherited cardiomyopathies through information technology.

    Science.gov (United States)

    Larizza, C; Gabetta, M; Milani, G; Bucalo, M; Mulas, F; Nuzzo, A; Favalli, V; Arbustini, E; Bellazzi, R

    2013-01-01

    The INHERITANCE project, funded by the European Commission, is aimed at studying genetic or inherited Dilated cardiomyopathies (DCM) and at understanding the impact and management of the disease within families that suffer from heart conditions that are caused by DCMs. The biomedical informatics research activity of the project aims at implementing information technology solutions to support the project team in the different phases of their research, in particular in genes screening prioritization and new gene-disease association discovery. In order to manage the huge quantity of scientific, clinical and patient data generated by the project several advanced biomedical informatics tools have been developed. The paper describes a layer of software instruments to support translation of the results of the project in clinical practice as well as to support the scientific discovery process. This layer includes data warehousing, intelligent querying of the phenotype data, integrated search of biological data and knowledge repositories, text mining of the relevant literature, and case based reasoning. At the moment, a set of 1,394 patients and 9,784 observations has been stored into the INHERITANCE data warehouse. The literature database contains more than 1,100,000 articles retrieved from the Pubmed and generically related to cardiac diseases, already analyzed for extracting medical concepts and genes. After two years of project the data warehouse has been completely set up and the text mining tools for automatic literature analysis have been implemented and tested. A first prototype of the decision support tool for knowledge discovery and gene prioritization is available, but a more complete release is still under development.

  18. Supported liquid membranes technologies in metals removal from liquid effluents

    Directory of Open Access Journals (Sweden)

    de Agreda, D.

    2011-04-01

    Full Text Available The generation of liquid effluents containing organic and inorganic residues from industries present a potential hazardousness for environment and human health, being mandatory the elimination of these pollutants from the respective solutions containing them. In order to achieve this goal, several techniques are being used and among them, supported liquid membranes technologies are showing their potential for their application in the removal of metals contained in liquid effluents. Supported liquid membranes are a combination between conventional polymeric membranes and solvent extraction. Several configurations are used: flat-sheet supported liquid membranes, spiral wounds and hollow fiber modules. In order to improve their effectiveness, smart operations have been developed: non-dispersive solvent extraction, non-dispersive solvent extraction with strip phase dispersion and hollow fiber renewal liquid membrane. This paper overviewed some of these supported liquid membranes technologies and their applications to the treatment of metal-bearing liquid effluents.

    La generación, por parte de las industrias, de efluentes líquidos conteniendo sustancias orgánicas e inorgánicas, es un peligro potencial tanto para los humanos como para el medio ambiente, siendo necesaria la eliminación de estos elementos tóxicos de las disoluciones que los contienen. Para conseguir este fin, se están aplicando diversas técnicas y entre ellas las tecnologías de membranas líquidas soportadas, están demostrando sus aptitudes para la eliminación de metales contenidos en efluentes líquidos. Las membranas líquidas soportadas, resultan de la unión de las membranas poliméricas y de la tecnología de extracción líquido-líquido. Este tipo de membranas se pueden utilizar en diversas configuraciones: plana, módulo en fibra hueca y módulo en espiral y para aumentar su efectividad se están desarrollando las llamadas operaciones avanzadas: extracción no

  19. An Information Technology Tool to Support Negotiating Teams

    Directory of Open Access Journals (Sweden)

    Jose Montanana

    1995-05-01

    Full Text Available This paper discusses computer-supported large-scale negotiation, in particular, negotiation with advisers. It is claimed that better communication within negotiating teams should lead to longer, more productive sessions than the current ones. To this end, an information technology environment should be provided for the negotiation. The paper introduces SHINE, a collaborative software system developed at the University of Chile. This software has many features to allow rich interactions among advisers belonging to the same team, among negotiators and also between a negotiator and his advisers. Emphasis is placed on the design features to enable and ease these interactions. The facilities include WYSIWIS windows, enhanced electronic mail to send and receive text or video messages with several urgency levels, an evaluation procedure and various ways to state comments and ideas. SHINE has been implemented as a prototype on Sun Sparc workstations.

  20. New trends in high-technology health care support services.

    Science.gov (United States)

    Blumberg, D F

    1998-01-01

    To understand clearly the economic dynamics of high-technology service and support in hospitals, the author used results of recent studies carried out by D. F. Blumberg & Associates, utilizing a variety of sources, to identify existing cost components of the typical 300- to 400-bed general hospital located in a major metropolitan area in the United States. The largest single functional component of cost is direct labor and benefits. Other major cost items include direct overhead administration and infrastructure costs and outside material equipment and supply purchases. This evaluation, based on extensive benchmarking comparison and market estimates, suggests that the issues of make, buy, or outsource are neither trivial nor easy to resolve in the health care field.

  1. Supporting global health goals with information and communications technology.

    Science.gov (United States)

    Boman, Magnus; Kruse, Erik

    2017-06-01

    The objective of this study is to critically assess the possible roles of information and communications technology (ICT) in supporting global health goals. This is done by considering privilege and connectibility. In short, ICT can contribute by providing health information via four different kinds of access, each with its own history and prospective future. All four are analyzed here, in two perspectives: business-as-usual and disruptive. Health data analytics is difficult since the digital representation of past, current, and future health information is lacking. The flow of analytics that may prove beneficial to the individual and not just meet abstract population-level goals or ambitions is analyzed in detail. Sensemaking is also needed, to meet the minimum requirement of making prospective future services understandable to policymakers. Drivers as well as barriers for areas in which policy decisions have the potential to drive positive developments for meeting the Sustainable Development Goals are identified.

  2. Terabit Wireless Communication Challenges

    Science.gov (United States)

    Hwu, Shian U.

    2012-01-01

    This presentation briefly discusses a research effort on Terabit Wireless communication systems for possible space applications. Recently, terahertz (THz) technology (300-3000 GHz frequency) has attracted a great deal of interest from academia and industry. This is due to a number of interesting features of THz waves, including the nearly unlimited bandwidths available, and the non-ionizing radiation nature which does not damage human tissues and DNA with minimum health threat. Also, as millimeter-wave communication systems mature, the focus of research is, naturally, moving to the THz range. Many scientists regard THz as the last great frontier of the electromagnetic spectrum, but finding new applications outside the traditional niches of radio astronomy, Earth and planetary remote sensing, and molecular spectroscopy particularly in biomedical imaging and wireless communications has been relatively slow. Radiologists find this area of study so attractive because t-rays are non-ionizing, which suggests no harm is done to tissue or DNA. They also offer the possibility of performing spectroscopic measurements over a very wide frequency range, and can even capture signatures from liquids and solids. According to Shannon theory, the broad bandwidth of the THz frequency bands can be used for terabit-per-second (Tb/s) wireless communication systems. This enables several new applications, such as cell phones with 360 degrees autostereoscopic displays, optic-fiber replacement, and wireless Tb/s file transferring. Although THz technology could satisfy the demand for an extremely high data rate, a number of technical challenges need to be overcome before its development. This presentation provides an overview the state-of-the- art in THz wireless communication and the technical challenges for an emerging application in Terabit wireless systems. The main issue for THz wave propagation is the high atmospheric attenuation, which is dominated by water vapor absorption in the THz

  3. A Decision Support System for Managing a Diverse Portfolio of Technology Resources

    Science.gov (United States)

    Smith, J.

    2000-01-01

    This paper describes an automated decision support system designed to facilitate the management of a continuously changing portfolio of technologies as new technologies are deployed and older technologies are decommissioned.

  4. Using 100G Network Technology in Support of Petascale Science

    Science.gov (United States)

    Gary, James P.

    2011-01-01

    NASA in collaboration with a number of partners conducted a set of individual experiments and demonstrations during SC 10 that collectively were titled "Using 100G Network Technology in Support of Petascale Science". The partners included the iCAIR, Internet2, LAC, MAX, National LambdaRail (NLR), NOAA and SCinet Research Sandbox (SRS) as well as the vendors Ciena, Cisco, ColorChip, cPacket, Extreme Networks, Fusion-io, HP and Panduit who most generously allowed some of their leading edge 40G/100G optical transport, Ethernet switch and Internet Protocol router equipment and file server technologies to be involved. The experiments and demonstrations featured different vendor-provided 40G/100G network technology solutions for full-duplex 40G and 100G LAN data flows across SRS-deployed single-node fiber-pairs among the Exhibit Booths of NASA, the National Center for Data lining, NOAA and the SCinet Network Operations Center, as well as between the NASA Exhibit Booth in New Orleans and the Starlight Communications Exchange facility in Chicago across special SC 10- only 80- and 100-Gbps wide area network links provisioned respectively by the NLR and Internet2, then on to GSFC across a 40-Gbps link. provisioned by the Mid-Atlantic Crossroads. The networks and vendor equipment were load-stressed by sets of NASA/GSFC High End Computer Network Team-built, relatively inexpensive, net-test-workstations that are capable of demonstrating greater than 100Gbps uni-directional nuttcp-enabled memory-to-memory data transfers, greater than 80-Gbps aggregate--bidirectional memory-to-memory data transfers, and near 40-Gbps uni-directional disk-to-disk file copying. This paper will summarize the background context, key accomplishments and some significances of these experiments and demonstrations.

  5. ANALYSIS AND COMPARISON OF EXISTING DECISION SUPPORT TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    V. A. Rybak

    2016-01-01

    Full Text Available The article presents the results of an analytical review and comparison of the most common managerial decision support technologies: the analytic hierarchy method, neural networks, fuzzy set theory, genetic algorithms and neural-fuzzy modeling. The advantages and disadvantages of these approaches are shown. Determine the scope of their application. It is shown that the hierarchy analysis method works well with the full initial information, but due to the need for expert comparison of alternatives and the selection of evaluation criteria has a high proportion of subjectivity. For problems in the conditions of risk and uncertainty prediction seems reasonable use of the theory of fuzzy sets and neural networks. It is also considered technology collective decision applied both in the general election, and the group of experts. It reduces the time for conciliation meetings to reach a consensus by the preliminary analysis of all views submitted for the plane in the form of points. At the same time the consistency of opinion is determined by the distance between them.

  6. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho (and others)

    2007-12-15

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries.

  7. Communities of practice: pedagogy and internet-based technologies to support educator's continuing technology professional development in higher education

    NARCIS (Netherlands)

    Maurice Schols

    2011-01-01

    Advances in information and communication technologies (ICTs) as well as modern pedagogical perspectives have created new possibilities to facilitate and support learning in higher education (HE). Emerging technologies bring opportunities to reconsider teaching and learning. New ideas and concepts

  8. COMMUNITIES OF PRACTICE: PEDAGOGY AND INTERNET-BASED TECHNOLOGIES TO SUPPORT EDUCATORS'CONTINUING TECHNOLOGY PROFESSIONAL DEVELOPMENT IN HIGHER EDUCATION

    NARCIS (Netherlands)

    drs Maurice Schols

    2011-01-01

    Advances in information and communication technologies (ICTs) as well as modern pedagogical perspectives have created new possibilities to facilitate and support learning in higher education (HE). Emerging technologies bring opportunities to reconsider teaching and learning. New ideas and concepts

  9. Wireless Network Communications Overview for Space Mission Operations

    Science.gov (United States)

    Fink, Patrick W.

    2009-01-01

    The mission of the On-Board Wireless Working Group (WWG) is to serve as a general CCSDS focus group for intra-vehicle wireless technologies. The WWG investigates and makes recommendations pursuant to standardization of applicable wireless network protocols, ensuring the interoperability of independently developed wireless communication assets. This document presents technical background information concerning uses and applicability of wireless networking technologies for space missions. Agency-relevant driving scenarios, for which wireless network communications will provide a significant return-on-investment benefiting the participating international agencies, are used to focus the scope of the enclosed technical information.

  10. Development of NPP Monitoring and Operation Support Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)] (and others)

    2008-04-15

    During the first stage (2001.7.1-2004.6.30), we developed general human factors design guidelines VDU-based workstations, PMAS alarm display design guidelines, PMAS SPADES display design guidelines, and the revision of KHNP HFE guidelines (HF-010), which have been applied to domestic NPP designs. We also supported other KNICS projects by performing RPS COM design reviews, development of RPS COM Style Guide, and a review of CEDMCS cabinet operator module display design. We developed the ADIOS prototype, NPP performance analysis systems for YGN No.1, 2 plants and Kori No. 2 plant, alarm cause tracking systems for Kori No. 2 plant and OPR1000, and signal fault detection and diagnosis methods for deaerators and steam generators. During the second stage(2004.7.1-2008.4.30), we supported other KNICS projects by reviewing RPS COM display designs three times, developing ESF-CCS COM style guides and reviewing ESF-CCS COM display design, reviewing CRCS LOM and PCS MTP display designs, and developing requirements for DCS GUI components. We also developed integrated style guide for I and C cabinet operator module display designs. In cooperative research with KOPEC-AE, we developed basic technologies for advanced HSI design including task analysis methods, an information and control requirements database, display design criteria, a HSI prototype with its evaluation, and methods for human factors engineering verification and validation.

  11. Passive Wireless Temperature Sensor for Harsh Environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wireless Sensor Technologies has for several years been developing a passive Wireless Temperature Sensor (WTS) for gas turbine engine and other harsh environment...

  12. Wireless Power Transfer Protocols in Sensor Networks: Experiments and Simulations

    National Research Council Canada - National Science Library

    Sotiris Nikoletseas; Theofanis P Raptis; Alexandros Souroulagkas; Dimitrios Tsolovos

    2017-01-01

    Rapid technological advances in the domain of Wireless Power Transfer pave the way for novel methods for power management in systems of wireless devices, and recent research works have already started...

  13. Localization in wireless sensor networks: Classification and evaluation of techniques

    National Research Council Canada - National Science Library

    Ewa Niewiadomska-Szynkiewicz

    2012-01-01

      Localization in wireless sensor networks: Classification and evaluation of techniques Recent advances in technology have enabled the development of low cost, low power and multi functional wireless sensing devices...

  14. A Distributed Management Scheme for supporting energy-harvested I/O devices

    NARCIS (Netherlands)

    Zand, P.; Das, Kallol; Mathews, E.; Havinga, Paul J.M.

    Current wireless technologies for industrial application, such as WirelessHART and ISA100.11a, are not designed to support harvester-powered input/output (I/O) devices, where energy availability varies in a non-deterministic manner. The centralized management approach of these standards makes it

  15. Radio Relays Improve Wireless Products

    Science.gov (United States)

    2009-01-01

    Signal Hill, California-based XCOM Wireless Inc. developed radio frequency micromachine (RF MEMS) relays with a Phase II Small Business Innovation Research (SBIR) contract through NASA?s Jet Propulsion Laboratory. In order to improve satellite communication systems, XCOM produced wireless RF MEMS relays and tunable capacitors that use metal-to-metal contact and have the potential to outperform most semiconductor technologies while using less power. These relays are used in high-frequency test equipment and instrumentation, where increased speed can mean significant cost savings. Applications now also include mainstream wireless applications and greatly improved tactical radios.

  16. Wireless Communications in Smart Grid

    Science.gov (United States)

    Bojkovic, Zoran; Bakmaz, Bojan

    Communication networks play a crucial role in smart grid, as the intelligence of this complex system is built based on information exchange across the power grid. Wireless communications and networking are among the most economical ways to build the essential part of the scalable communication infrastructure for smart grid. In particular, wireless networks will be deployed widely in the smart grid for automatic meter reading, remote system and customer site monitoring, as well as equipment fault diagnosing. With an increasing interest from both the academic and industrial communities, this chapter systematically investigates recent advances in wireless communication technology for the smart grid.

  17. Autonomous system for wireless network communication powered by photovoltaic solar energy; Sistema autonomo de comunicacao sem fio em malha alimentado por energia solar fotovoltaica

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, Rafael Herrero

    2009-07-01

    The wireless mesh network communication technology, based on the IEEE802.11 standard, has been a relevant technology solution for wireless networking in the recent years. However, even with the elimination of cables for data communication, the wireless mesh networks have to be connected to a voltage source using an electrical cable that may not be available at the local installation. In this scenario, being Brazil a country located in a tropical zone that receives large annual solar irradiation, the conversion of photons to electricity can be an alternative to eliminate the needs of wiring to the mesh access points. This work contributes to the development of autonomous wireless mesh communication systems powered by solar energy, with easy installation in urban or rural areas. This work also describes its evaluations in aspects such as autonomy, wireless coverage, number of users supported, installation height and throughput. (author)

  18. Extending ABB’s WirelessHART Tool

    OpenAIRE

    Zakupszki, Andras; Pichetpongsa, Nuttapon

    2013-01-01

    Within this decade, wireless technology has been used in process control in various industries. WirelessHART is one of the standards, used for creating communication networks for such purpose. Since the technology is relatively new, there are many known and unknown risks in deploying it in real life applications.ABB’s WirelessHART Tool is used for generating simulation scenarios that can be used for evaluating the performance of WirelessHART networks under different conditions.This paper desc...

  19. Supporting evidence-based practice for nurses through information technologies.

    Science.gov (United States)

    Doran, Diane M; Haynes, R Brian; Kushniruk, André; Straus, Sharon; Grimshaw, Jeremy; Hall, Linda McGillis; Dubrowski, Adam; Di Pietro, Tammie; Newman, Kristine; Almost, Joan; Nguyen, Ha; Carryer, Jennifer; Jedras, Dawn

    2010-03-01

    To evaluate the usability of mobile information terminals, such as personal digital assistants (PDAs) or Tablet personal computers, to improve access to information resources for nurses and to explore the relationship between PDA or Tablet-supported information resources and outcomes. The authors evaluated an initiative of the Nursing Secretariat, Ontario Ministry of Health and Long-Term Care, which provided nurses with PDAs and Tablet PCs, to enable Internet access to information resources. Nurses had access to drug and medical reference information, best practice guidelines (BPGs), and to abstracts of recent research studies. The authors took place over a 12-month period. Diffusion of Innovation theory and the Promoting Action on Research Implementation in Health Services (PARIHS) model guided the selection of variables for study. A longitudinal design involving questionnaires was used to evaluate the impact of the mobile technologies on barriers to research utilization, perceived quality of care, and on nurses' job satisfaction. The setting was 29 acute care, long-term care, home care, and correctional organizations in Ontario, Canada. The sample consisted of 488 frontline-nurses. Nurses most frequently consulted drug and medical reference information, Google, and Nursing PLUS. Overall, nurses were most satisfied with the Registered Nurses Association of Ontario (RNAO) BPGs and rated the RNAO BPGs as the easiest resource to use. Among the PDA and Tablet users, there was a significant improvement in research awareness/values, and in communication of research. There was also, for the PDA users only, a significant improvement over time in perceived quality of care and job satisfaction, but primarily in long-term care settings. It is feasible to provide nurses with access to evidence-based practice resources via mobile information technologies to reduce the barriers to research utilization.

  20. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.; Brown, Scott A.

    2011-09-29

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). To do this, Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify hydrogen- and fuel-cell-related patents that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of hydrogen- and fuel-cell-related grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs, and within the FCT portfolio.

  1. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.

    2012-09-28

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify patents related to hydrogen and fuel cells that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents’ current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs that are related to hydrogen and fuel cells.

  2. Strategies for improvement of spectrum capacity for WiMax cellular systems by Cognitive Radio Technology supported by Relay Stations

    DEFF Research Database (Denmark)

    Frederiksen, Flemming Bjerge; Prasad, Ramjee

    2007-01-01

    Methods to enhance the use of the frequency spectrum by automatical spectrum sensing plus spectrum sharing in a cognitive radio technology context will be presented and discussed in this paper. Ideas to improve the wireless transmission by orthogonal OFDM-based communication and to increase the c...

  3. Situation and trends in trade-supporting information technologies

    Directory of Open Access Journals (Sweden)

    Naděžda Chalupová

    2008-01-01

    Full Text Available During last years information and communication technologies (ICT are developing very dynamically and are penetrating into a lot of various business areas. Its perceiving is progressively changing from something rather sporadic, bringing a competitive advantage on the market, to absolute necessity determining existence or inexistence of certain enterprise among organizations able to compete.The paper maps actual state and evaluates develop needs in area of trade support by ICT devices in czech as well as european society in general, and this on the basis of accessible statistical evidences, publicised studies and various researches outcomes and other conducting sources. It notices problems or lacks in this area and it identifies trends in its solution.Some simple indicators and also complex indicator so-called “e-business index” are monitored for evaluating of actual state of ICT using in sphere of trading and also in order to possibility of successive identification of trends in this area. This summary indicator measures level of ICT using in certain enterprise, and integrates in itself, among others, some from mentioned simple statistics too. It is constructed from four main general subcategories, which are in more detailed way separated onwards.

  4. Wireless and mobile systems in telemedicine

    Directory of Open Access Journals (Sweden)

    Reza Safdari

    2012-12-01

    Full Text Available Background: It is necessary to deploy mobile and wireless systems in healthcare, because they have many benefits for healthcare systems. The objectives of this article were introducing various systems, applications, and standards of the wireless and mobile telemedicine. Material and Methods: This review study was conducted in 2010. To conduct the study, published articles in the years 2005 to 2012, in English with an emphasis on wireless and mobile technologies in health were studied. Search was done with key words include telemedicine, wireless health systems, health and telecommunications technology in databases including Pubmed, Science Direct, Google Scholar, Web of Sciences, Proquest. The collected data were analyzed. Results: Telemedicine system in the ambulance, telemedicine systems in space, telecardiology systems, EEG system, ultrasound system are some types of wireless and mobile systems in telemedicine. PDA-based mobile and wireless telemedicine application, based PDA drug application, and patient tracking application are some of wireless and mobile applications of telemedicine. The most important standards of wireless and mobile telemedicine are HL7, DICOM, SNOMed, and ICD-9-CM. Conclusion: There are many challenges in the wireless and mobile systems in telemedicine, despite the many benefits. Slow speed in sending pictures and video, lack of attention to the privacy in the design of these systems, environmental variables and the number of users during the day are some of these challenges. It is recommended to consider these challenges during the planning and designing of wireless and mobile systems in telemedicine.

  5. A Reliable Wireless Control System for Tomato Hydroponics.

    Science.gov (United States)

    Ibayashi, Hirofumi; Kaneda, Yukimasa; Imahara, Jungo; Oishi, Naoki; Kuroda, Masahiro; Mineno, Hiroshi

    2016-05-05

    Agricultural systems using advanced information and communication (ICT) technology can produce high-quality crops in a stable environment while decreasing the need for manual labor. The system collects a wide variety of environmental data and provides the precise cultivation control needed to produce high value-added crops; however, there are the problems of packet transmission errors in wireless sensor networks or system failure due to having the equipment in a hot and humid environment. In this paper, we propose a reliable wireless control system for hydroponic tomato cultivation using the 400 MHz wireless band and the IEEE 802.15.6 standard. The 400 MHz band, which is lower than the 2.4 GHz band, has good obstacle diffraction, and zero-data-loss communication is realized using the guaranteed time-slot method supported by the IEEE 802.15.6 standard. In addition, this system has fault tolerance and a self-healing function to recover from faults such as packet transmission failures due to deterioration of the wireless communication quality. In our basic experiments, the 400 MHz band wireless communication was not affected by the plants' growth, and the packet error rate was less than that of the 2.4 GHz band. In summary, we achieved a real-time hydroponic liquid supply control with no data loss by applying a 400 MHz band WSN to hydroponic tomato cultivation.

  6. A Reliable Wireless Control System for Tomato Hydroponics

    Science.gov (United States)

    Ibayashi, Hirofumi; Kaneda, Yukimasa; Imahara, Jungo; Oishi, Naoki; Kuroda, Masahiro; Mineno, Hiroshi

    2016-01-01

    Agricultural systems using advanced information and communication (ICT) technology can produce high-quality crops in a stable environment while decreasing the need for manual labor. The system collects a wide variety of environmental data and provides the precise cultivation control needed to produce high value-added crops; however, there are the problems of packet transmission errors in wireless sensor networks or system failure due to having the equipment in a hot and humid environment. In this paper, we propose a reliable wireless control system for hydroponic tomato cultivation using the 400 MHz wireless band and the IEEE 802.15.6 standard. The 400 MHz band, which is lower than the 2.4 GHz band, has good obstacle diffraction, and zero-data-loss communication is realized using the guaranteed time-slot method supported by the IEEE 802.15.6 standard. In addition, this system has fault tolerance and a self-healing function to recover from faults such as packet transmission failures due to deterioration of the wireless communication quality. In our basic experiments, the 400 MHz band wireless communication was not affected by the plants’ growth, and the packet error rate was less than that of the 2.4 GHz band. In summary, we achieved a real-time hydroponic liquid supply control with no data loss by applying a 400 MHz band WSN to hydroponic tomato cultivation. PMID:27164105

  7. A Reliable Wireless Control System for Tomato Hydroponics

    Directory of Open Access Journals (Sweden)

    Hirofumi Ibayashi

    2016-05-01

    Full Text Available Agricultural systems using advanced information and communication (ICT technology can produce high-quality crops in a stable environment while decreasing the need for manual labor. The system collects a wide variety of environmental data and provides the precise cultivation control needed to produce high value-added crops; however, there are the problems of packet transmission errors in wireless sensor networks or system failure due to having the equipment in a hot and humid environment. In this paper, we propose a reliable wireless control system for hydroponic tomato cultivation using the 400 MHz wireless band and the IEEE 802.15.6 standard. The 400 MHz band, which is lower than the 2.4 GHz band, has good obstacle diffraction, and zero-data-loss communication is realized using the guaranteed time-slot method supported by the IEEE 802.15.6 standard. In addition, this system has fault tolerance and a self-healing function to recover from faults such as packet transmission failures due to deterioration of the wireless communication quality. In our basic experiments, the 400 MHz band wireless communication was not affected by the plants’ growth, and the packet error rate was less than that of the 2.4 GHz band. In summary, we achieved a real-time hydroponic liquid supply control with no data loss by applying a 400 MHz band WSN to hydroponic tomato cultivation.

  8. Organizational Support of Technology Integration in One School in Lebanon

    Science.gov (United States)

    Zgheib, Rosine S.

    2013-01-01

    Technology has been at the center of heated debates in educational settings driving schools to compete for the best technological equipments. However, in Lebanon there is a lag in technology integration matching twenty first century advances. Several barriers related to teacher attitudes, lack of technical skills and organizational constraints to…

  9. Fault Tolerance in ZigBee Wireless Sensor Networks

    Science.gov (United States)

    Alena, Richard; Gilstrap, Ray; Baldwin, Jarren; Stone, Thom; Wilson, Pete

    2011-01-01

    Wireless sensor networks (WSN) based on the IEEE 802.15.4 Personal Area Network standard are finding increasing use in the home automation and emerging smart energy markets. The network and application layers, based on the ZigBee 2007 PRO Standard, provide a convenient framework for component-based software that supports customer solutions from multiple vendors. This technology is supported by System-on-a-Chip solutions, resulting in extremely small and low-power nodes. The Wireless Connections in Space Project addresses the aerospace flight domain for both flight-critical and non-critical avionics. WSNs provide the inherent fault tolerance required for aerospace applications utilizing such technology. The team from Ames Research Center has developed techniques for assessing the fault tolerance of ZigBee WSNs challenged by radio frequency (RF) interference or WSN node failure.

  10. Efficacy analysis of LDPC coded APSK modulated differential space-time-frequency coded for wireless body area network using MB-pulsed OFDM UWB technology.

    Science.gov (United States)

    Manimegalai, C T; Gauni, Sabitha; Kalimuthu, K

    2017-12-04

    Wireless body area network (WBAN) is a breakthrough technology in healthcare areas such as hospital and telemedicine. The human body has a complex mixture of different tissues. It is expected that the nature of propagation of electromagnetic signals is distinct in each of these tissues. This forms the base for the WBAN, which is different from other environments. In this paper, the knowledge of Ultra Wide Band (UWB) channel is explored in the WBAN (IEEE 802.15.6) system. The measurements of parameters in frequency range from 3.1-10.6 GHz are taken. The proposed system, transmits data up to 480 Mbps by using LDPC coded APSK Modulated Differential Space-Time-Frequency Coded MB-OFDM to increase the throughput and power efficiency.

  11. Wirelessness as Experience of Transition

    Directory of Open Access Journals (Sweden)

    Adrian Mackenzie

    2008-01-01

    Full Text Available The paper analyses wireless networks in terms of a concept of experience drawn from the work of William James. James' account of experience focuses closely on the effects of ongoing change, and this is particularly useful in thinking about media change. The specific experience in question here is 'wirelessness,' an experience that envelops many media, infrastructures, practices, and processes today. The paper argues that a concept of wirelessness uniquely connects together a set of perceptions, representation, materials, problems and events associated with ongoing change in contemporary media and information cultures. In analysing wirelessness as form of experience, the article examines how those feelings of ongoing change shape and inform experiences of self, otherness, place and sociality in technological-informatic environments. In describing different infrastructural and commercial dimensions of wirelessness, it pays close attention to how ‘conjunctive relations’ (James’ term such as ‘with’, ‘between’, ‘near’, and ‘inside’ arise in wireless networks, and how different kinds of intimacy and distance stem from conjunctive relations. The paper explores how wirelessness embodies and organises networked places. In this respect, the paper inverts conventional understandings of the network as ground or platform. It treats the under-represented yet highly significant embodied experiences of relations as generative of information infrastructures.

  12. SONAbeam optical wireless products

    Science.gov (United States)

    Carbonneau, Theresa H.; Mecherle, G. Stephen

    2000-05-01

    fSONA has developed an optical wireless line of products that will enable high bandwidth wireless connectivity, much like fiber optic technology has done for wired connectivity. All of the fSONA products use wavelengths around 1.5 micrometers both for eye safety and for maximum commonality with fiber optic technology. Initial products provide either OC-3 (155 Mbps) or Fast Ethernet (125 Mbps). The 2 km unit is fixed mounted and provides a relatively large beamwidth to compensate for building motion. The 4 km unit utilizes a narrow transmit beamwidth with active pointing for motion compensation. Trials of the units with key customers begin in second quarter 2000, with volume production of the 2 km- unit beginning in third quarter and the 4 km unit in the fourth quarter. Product designs for 622 Mbps and 1.25 Gbps should be completed prior to the end of the 2000.

  13. Ubiquitous Wireless Smart Sensing and Control

    Science.gov (United States)

    Wagner, Raymond

    2013-01-01

    Need new technologies to reliably and safely have humans interact within sensored environments (integrated user interfaces, physical and cognitive augmentation, training, and human-systems integration tools). Areas of focus include: radio frequency identification (RFID), motion tracking, wireless communication, wearable computing, adaptive training and decision support systems, and tele-operations. The challenge is developing effective, low cost/mass/volume/power integrated monitoring systems to assess and control system, environmental, and operator health; and accurately determining and controlling the physical, chemical, and biological environments of the areas and associated environmental control systems.

  14. A Framework for Planning a Unified Wired and Wireless ICT Infrastructure

    OpenAIRE

    Riaz, M. Tahir; Nielsen, Rasmus Hjorth; Pedersen, Jens Myrup; Prasad, Neeli R.; Madsen, Ole Brun

    2007-01-01

    The increase in the use of information and communication technology (ICT) has pushed the existing access networks to their limits. Whole new access networks are currently being deployed and are expected to fully support the already started synergy of services converging on to one network. Through a brief survey of synergy and technology trends, it is concluded that a future network will use wired and wireless as complementary technologies. In this context the paper proposes a framework for pl...

  15. Insecurity of Wireless Networks

    Energy Technology Data Exchange (ETDEWEB)

    Sheldon, Frederick T [ORNL; Weber, John Mark [Dynetics, Inc.; Yoo, Seong-Moo [University of Alabama, Huntsville; Pan, W. David [University of Alabama, Huntsville

    2012-01-01

    Wireless is a powerful core technology enabling our global digital infrastructure. Wi-Fi networks are susceptible to attacks on Wired Equivalency Privacy, Wi-Fi Protected Access (WPA), and WPA2. These attack signatures can be profiled into a system that defends against such attacks on the basis of their inherent characteristics. Wi-Fi is the standard protocol for wireless networks used extensively in US critical infrastructures. Since the Wired Equivalency Privacy (WEP) security protocol was broken, the Wi-Fi Protected Access (WPA) protocol has been considered the secure alternative compatible with hardware developed for WEP. However, in November 2008, researchers developed an attack on WPA, allowing forgery of Address Resolution Protocol (ARP) packets. Subsequent enhancements have enabled ARP poisoning, cryptosystem denial of service, and man-in-the-middle attacks. Open source systems and methods (OSSM) have long been used to secure networks against such attacks. This article reviews OSSMs and the results of experimental attacks on WPA. These experiments re-created current attacks in a laboratory setting, recording both wired and wireless traffic. The article discusses methods of intrusion detection and prevention in the context of cyber physical protection of critical Internet infrastructure. The basis for this research is a specialized (and undoubtedly incomplete) taxonomy of Wi-Fi attacks and their adaptations to existing countermeasures and protocol revisions. Ultimately, this article aims to provide a clearer picture of how and why wireless protection protocols and encryption must achieve a more scientific basis for detecting and preventing such attacks.

  16. Development of a spatial decision support system for flood risk management in Brazil that combines volunteered geographic information with wireless sensor networks

    Science.gov (United States)

    Horita, Flávio E. A.; Albuquerque, João Porto de; Degrossi, Lívia C.; Mendiondo, Eduardo M.; Ueyama, Jó

    2015-07-01

    Effective flood risk management requires updated information to ensure that the correct decisions can be made. This can be provided by Wireless Sensor Networks (WSN) which are a low-cost means of collecting updated information about rivers. Another valuable resource is Volunteered Geographic Information (VGI) which is a comparatively new means of improving the coverage of monitored areas because it is able to supply supplementary information to the WSN and thus support decision-making in flood risk management. However, there still remains the problem of how to combine WSN data with VGI. In this paper, an attempt is made to investigate AGORA-DS, which is a Spatial Decision Support System (SDSS) that is able to make flood risk management more effective by combining these data sources, i.e. WSN with VGI. This approach is built over a conceptual model that complies with the interoperable standards laid down by the Open Geospatial Consortium (OGC) - e.g. Sensor Observation Service (SOS) and Web Feature Service (WFS) - and seeks to combine and present unified information in a web-based decision support tool. This work was deployed in a real scenario of flood risk management in the town of São Carlos in Brazil. The evidence obtained from this deployment confirmed that interoperable standards can support the integration of data from distinct data sources. In addition, they also show that VGI is able to provide information about areas of the river basin which lack data since there is no appropriate station in the area. Hence it provides a valuable support for the WSN data. It can thus be concluded that AGORA-DS is able to combine information provided by WSN and VGI, and provide useful information for supporting flood risk management.

  17. Cognitive wireless networks

    CERN Document Server

    Feng, Zhiyong; Zhang, Ping

    2015-01-01

    This brief examines the current research in cognitive wireless networks (CWNs). Along with a review of challenges in CWNs, this brief presents novel theoretical studies and architecture models for CWNs, advances in the cognitive information awareness and delivery, and intelligent resource management technologies. The brief presents the motivations and concepts of CWNs, including theoretical studies of temporal and geographic distribution entropy as well as cognitive information metrics. A new architecture model of CWNs is proposed with theoretical, functional and deployment architectures suppo

  18. Support of Study on Engineering Technology from Physics and Mathematics

    OpenAIRE

    Mynbaev, Djafar K.; Cabo, Candido; Kezerashvili, Roman Ya.; Liou-Mark, Janet

    2008-01-01

    An approach that provides students with an ability to transfer learning in physics and mathematics to the engineering-technology courses through e-teaching and e-learning process is proposed. E-modules of courses in mathematics, physics, computer systems technology, and electrical and telecommunications engineering technology have been developed. These modules being used in the Blackboard and Web-based communications systems create a virtual interdisciplinary learning community, which helps t...

  19. Design Framework for Vibration Monitoring Systems for Helicopter Rotor Blade Monitoring Using Wireless Sensor Networks

    NARCIS (Netherlands)

    Sanchez Ramirez, Andrea; Loendersloot, Richard; Jauregui Becker, Juan Manuel; Tinga, Tiedo; Chang, F.K.

    2013-01-01

    The pursue of methods for supporting Structural Health Monitoring (SHM) has been an important driver for the technological innovation in several engineering fields such as wireless communication, sensing and power harvesting. However, despite of the innovative and scientific value of these advances,

  20. Wireless devices in nursing education

    Directory of Open Access Journals (Sweden)

    Ana Belén Sánchez-García

    2013-03-01

    Full Text Available Objective. This article sought to explore the adoption of wireless devices in university nursing teaching and address their repercussion on future professionals. Methodology. This is a bibliographical study conducted in 2011, which analyzed international publications on the use, review, application, opinion, and experimentation of wireless devices in university nursing teaching of wireless technology in nursing teaching. The following databases were used: Medline and Science@Direct. Results. A total of 503 articles were extracted and 77 were selected, of which 40 investigated the Personal Digital Assistant (PDA, 13 the clicker (Student Response Wireless System, and six the smart phone. The use of mobile devices has experienced strong growth during the last five years, especially PDAs. Conclusion. Use of mobile devices in university nursing teaching has grown in recent years, especially PDAs

  1. What is a missing link among wireless persistent surveillance?

    Science.gov (United States)

    Hsu, Charles; Szu, Harold

    2011-06-01

    The next generation surveillance system will equip with versatile sensor devices and information focus capable of conducting regular and irregular surveillance and security environments worldwide. The community of the persistent surveillance must invest the limited energy and money effectively into researching enabling technologies such as nanotechnology, wireless networks, and micro-electromechanical systems (MEMS) to develop persistent surveillance applications for the future. Wireless sensor networks can be used by the military for a number of purposes such as monitoring militant activity in remote areas and force protection. Being equipped with appropriate sensors these networks can enable detection of enemy movement, identification of enemy force and analysis of their movement and progress. Among these sensor network technologies, covert communication is one of the challenging tasks in the persistent surveillance because it is highly demanded to provide secured sensor nodes and linkage for fear of deliberate sabotage. Due to the matured VLSI/DSP technologies, affordable COTS of UWB technology with noise-like direct sequence (DS) time-domain pulses is a potential solution to support low probability of intercept and low probability of detection (LPI/LPD) data communication and transmission. This paper will describe a number of technical challenges in wireless persistent surveillance development include covert communication, network control and routing, collaborating signal and information processing, and etc. The paper concludes by presenting Hermitian Wavelets to enhance SNR in support of secured communication.

  2. Supporting the Knowledge Continuum through Technology: From Consumption to Fabrication

    Science.gov (United States)

    Blowers, Helene

    2012-01-01

    Spaces such as the Chicago and Miami YOUmedia centers are great examples of digital media labs. Focused on providing technology and services that allow teens to explore their passions in an unstructured creative process, these labs provide technology that encourages the self-expression and creation of ideas in almost any digital format, such as…

  3. Leveraging Web Technologies in Student Support Self-Services

    Science.gov (United States)

    Herndon, M. Craig

    2011-01-01

    The use of Web technologies to connect with and disperse information to prospective and current students can be effective for students as well as efficient for colleges. Early results of the use of such technologies in a statewide system point to high rates of satisfaction among students when information is delivered, provide clues on how various…

  4. WLAN Positioning Methods and Supporting Learning Technologies for Mobile Platforms

    Science.gov (United States)

    Melkonyan, Arsen

    2013-01-01

    Location technologies constitute an essential component of systems design for autonomous operations and control. The Global Positioning System (GPS) works well in outdoor areas, but the satellite signals are not strong enough to penetrate inside most indoor environments. As a result, a new strain of indoor positioning technologies that make use of…

  5. Seven Affordances of Computer-Supported Collaborative Learning: How to Support Collaborative Learning? How Can Technologies Help?

    Science.gov (United States)

    Jeong, Heisawn; Hmelo-Silver, Cindy E.

    2016-01-01

    This article proposes 7 core affordances of technology for collaborative learning based on theories of collaborative learning and CSCL (Computer-Supported Collaborative Learning) practices. Technology affords learner opportunities to (1) engage in a joint task, (2) communicate, (3) share resources, (4) engage in productive collaborative learning…

  6. Design of a wireless forensic readiness model (WFRM)

    CSIR Research Space (South Africa)

    Ngobeni, SJ

    2009-07-01

    Full Text Available The proliferation of wireless mobile communication technology has emerged and this has resulted in the increase of the wireless users. On the other hand, cyber crime in WLANs has appeared to be gradually increasing world wide. Wireless network...

  7. Managing Vulnerabilities of Tactical Wireless RF Network Systems: A Case Study

    Directory of Open Access Journals (Sweden)

    Philip Chan

    2011-11-01

    Full Text Available Organisations and individuals benefit when wireless networks are protected. After assessing the risks associated with wireless technologies, organisations can reduce the risks by applying countermeasures to address specific threats and vulnerabilities. These countermeasures include management, operational and technical controls. While these countermeasures will not prevent all penetrations and adverse events, they can be effective in reducing many of the common risks associated with wireless RF networks. Among engineers dealing with different scaled and interconnected engineering systems, such as tactical wireless RF communication systems, there is a growing need for a means of analyzing complex adaptive systems. We propose a methodology based on the systematic resolution of complex issues to manage the vulnerabilities of tactical wireless RF systems. There are is a need to assemble and balance the results of any successful measure, showing how well each solution meets the system’s objectives. The uncertain arguments used and other test results are combined using a form of mathematical theory for their analysis. Systems engineering thinking supports design decisions and enables decision‐makers to manage and assess the support for each solution. In these circumstances, complexity management arises from the many interacting and conflicting requirements of an increasing range of possible parameters. There may not be a single ‘right’ solution, only a satisfactory set of resolutions which this system helps to facilitate. Smart and innovative performance matrixes are introduced using a mathematical Bayesian network to manage, model, calculate and analyse all the potential vulnerability paths in wireless RF networks

  8. European Research towards Future Wireless Communications

    DEFF Research Database (Denmark)

    Frederiksen, Flemming Bjerge; Prasad, Ramjee; Pedersen, Gert Frølund

    2005-01-01

    This paper presents an overview of four on-going European research projects in the field of mobile and wireless communications leading to the next generations of wireless communications. The projects started in 2004. They investigate requirements and definition of access technology, network...... architecture, antennas and propagation, security, services, applications and socio-economic impact....

  9. Industrial wireless networking with resource constraint devices

    NARCIS (Netherlands)

    Das, Kallol

    2015-01-01

    During the last decade, wireless technologies have revolutionized the industrial automation sector by enabling wireless sensing and actuation for industrial applications. Most of these recently developed industrial standards are built on top of IEEE802.15.4 interface, which uses 2.4GHz frequency

  10. Point-of-care Cognitive Support Technology in Emergency Departments: A Scoping Review of Technology Acceptance by Clinicians.

    Science.gov (United States)

    Jun, Shelly; Plint, Amy C; Campbell, Sandy M; Curtis, Sarah; Sabir, Kyrellos; Newton, Amanda S

    2017-09-28

    Cognitive support technologies that support clinical decisions and practices in the emergency department (ED) have the potential to optimize patient care. However, limited uptake by clinicians can prevent successful implementation. A better understanding of acceptance of these technologies from the clinician perspective is needed. We conducted a scoping review to synthesize diverse, emerging evidence on clinicians' acceptance of point-of-care (POC) cognitive support technology in the ED. We systematically searched 10 electronic databases and gray literature published from January 2006 to December 2016. Studies of any design assessing an ED-based POC cognitive support technology were considered eligible for inclusion. Studies were required to report outcome data for technology acceptance. Two reviewers independently screened studies for relevance and quality. Study quality was assessed using the Mixed-Methods Appraisal Tool. A descriptive analysis of the features of POC cognitive support technology for each study is presented, illustrating trends in technology development and evaluation. A thematic analysis of clinician, technical, patient, and organizational factors associated with technology acceptance is also presented. Of the 1,563 references screened for eligibility, 24 met the inclusion criteria and were included in the review. Most studies were published from 2011 onward (88%), scored high for methodologic quality (79%), and examined POC technologies that were novel and newly introduced into the study setting (63%). Physician use of POC technology was the most commonly studied (67%). Technology acceptance was frequently conceptualized and measured by factors related to clinician attitudes and beliefs. Experience with the technology, intention to use, and actual use were also more common outcome measures of technology acceptance. Across studies, perceived usefulness was the most noteworthy factor impacting technology acceptance, and clinicians generally had

  11. Evolution of Wireless Sensor Networks for Industrial Control

    Directory of Open Access Journals (Sweden)

    Arthur Low

    2013-05-01

    Full Text Available Technologies evolve in a process of gradual scientific change, but the commercial application of technologies is discontinuous. Managers interested in technology evolution can integrate these contrasting ideas using a powerful theoretical framework, based on the concept of punctuated equilibrium from evolutionary biology. The framework, which enables the differentiation of the technical evolution of a technology from its market application, is used in this article to compare the two standards for wireless sensor networks (WSN for industrial instrumentation and control: WirelessHART and ISA100.11a. The two WSN standards are the product of two different market contexts, which have selected different minimum viable technologies for evolution in their respective niches. Network security issues present some important selection criteria. Both WSN standards implement security countermeasures against localized wireless network attacks based on the application of the AES encryption standard, but some specific security threats – some local, others remotely launched – are only well-defended by the adoption of public-key cryptographic (PKC protocols, which only ISA100.11a supports. This article concludes that the mainstream market potential of the Internet has influenced the evolution of ISA100.11a and will continue to demand that each WSN standard evolve in ways that are difficult to predict.

  12. Wireless mobile field-based GIS science and technology for crisis management process: A case study of a fire event, Cairo, Egypt

    Directory of Open Access Journals (Sweden)

    I.H. EL-Gamily

    2010-06-01

    Full Text Available Wireless GIS services have been evolving from scientific and technological perspectives through the last two decades. These services include both the location-based services (LBS and the mobile field-based GIS. Whereas the former provides the user with the capability to access and query the already established enterprise geo-database, the latter enables the end user not only to access and query but also to update the geo-database by a near real-time spatial and non-spatial data. However, to establish a mobile field-based GIS facility, a concise system architecture should be designed. This architecture includes client-side components, wireless communication facility, and server components. The integration and automation of these components can provide the capability to collect, update, validate, and query the enterprise geo-database remotely in a near real-time mode. One of the potential fields of applications for the mobile field-based GIS is the crisis management process. A prescribed system has been previously defined as emergency response cycle for managing both the natural and the man-made crises. Three phases of the emergency response cycle are outlined which are the response and rescue phase, the recovery and reconstruction phase, and mitigation and preparedness phase. In each phase, various tasks are undertaken based on the type of the event. Selective tasks of the response and the rescue phase of the fire event occurred in the Sheraton Exchange Center have been chosen to check the validity of using the mobile field-based GIS for enhancing the performance of these tasks. These tasks are path selection and quick damage estimates.

  13. Can New Digital Technologies Support Parasitology Teaching and Learning?

    Science.gov (United States)

    Jabbar, Abdul; Gasser, Robin B; Lodge, Jason

    2016-07-01

    Traditionally, parasitology courses have mostly been taught face-to-face on campus, but now digital technologies offer opportunities for teaching and learning. Here, we give a perspective on how new technologies might be used through student-centred teaching approaches. First, a snapshot of recent trends in the higher education is provided; then, a brief account is given of how digital technologies [e.g., massive open online courses (MOOCs), flipped classroom (FC), games, quizzes, dedicated Facebook, and digital badges] might promote parasitology teaching and learning in digital learning environments. In our opinion, some of these digital technologies might be useful for competency-based, self-regulated, learner-centred teaching and learning in an online or blended teaching environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Technology Advancements Enhance Aircraft Support of Experiment Campaigns

    Science.gov (United States)

    Vachon, Jacques J.

    2009-01-01

    For over 30 years, the NASA Airborne Science Program has provided airborne platforms for space bound instrument development, for calibrating new and existing satellite systems, and for making in situ and remote sensing measurements that can only be made from aircraft. New technologies have expanded the capabilities of aircraft that are operated for these missions. Over the last several years a new technology investment portfolio has yielded improvements that produce better measurements for the airborne science communities. These new technologies include unmanned vehicles, precision trajectory control and advanced telecommunications capabilities. We will discuss some of the benefits of these new technologies and systems which aim to provide users with more precision, lower operational costs, quicker access to data, and better management of multi aircraft and multi sensor campaigns.

  15. Decision support for selecting SLM technologies with stakeholders

    NARCIS (Netherlands)

    Schwilch, G.; Bachmann, F.; Graaff, de J.

    2012-01-01

    Sustainable Land Management (SLM) is a classic multi-stakeholder issue, concerning individual and community land users, agricultural advisors, natural resource managers, government authorities, civil society, and researchers alike. Selecting appropriate SLM technologies for implementation requires

  16. Ad hoc mobile wireless networks principles, protocols and applications

    CERN Document Server

    Sarkar, Subir Kumar; Puttamadappa, C

    2007-01-01

    Ad hoc mobile wireless networks have seen increased adaptation in a variety of disciplines because they can be deployed with simple infrastructures and virtually no central administration. In particular, the development of ad hoc wireless and sensor networks provides tremendous opportunities in areas including disaster recovery, defense, health care, and industrial environments. Ad Hoc Mobile Wireless Networks: Principles, Protocols and Applications explains the concepts, mechanisms, design, and performance of these systems. It presents in-depth explanations of the latest wireless technologies

  17. Wireless Charger Networking for Mobile Devices: Fundamentals, Standards, and Applications

    OpenAIRE

    Lu, Xiao; Niyato, Dusit; Wang, Ping; Kim, Dong In; Han, Zhu

    2014-01-01

    Wireless charging is a technique of transmitting power through an air gap to an electrical device for the purpose of energy replenishment. Recently, the wireless charging technology has been significantly advanced in terms of efficiency and functionality. This article first presents an overview and fundamentals of wireless charging. We then provide the review of standards, i.e., Qi and Alliance for Wireless Power (A4WP), and highlight on their communication protocols. Next, we propose a novel...

  18. Genetic Algorithms in Wireless Networking: Techniques, Applications, and Issues

    OpenAIRE

    Mehboob, Usama; Qadir, Junaid; Ali, Salman; Vasilakos, Athanasios

    2014-01-01

    In recent times, wireless access technology is becoming increasingly commonplace due to the ease of operation and installation of untethered wireless media. The design of wireless networking is challenging due to the highly dynamic environmental condition that makes parameter optimization a complex task. Due to the dynamic, and often unknown, operating conditions, modern wireless networking standards increasingly rely on machine learning and artificial intelligence algorithms. Genetic algorit...

  19. Supporting University Learning Through Mobile Technologies: A Global Perspective

    Directory of Open Access Journals (Sweden)

    David Gitumu Mugo

    2015-07-01

    Full Text Available The workplace in the modern world continues to demand higher qualifications and refined competencies. In the recent past, workers would respond to such demands through learning by correspondence. When the Internet and e-Learning emerged, it received widespread accolade as a solution to the challenges experienced by distant learners. The technology was also seen as an opportunity for educational institutions to leverage their technological uptake to benefit regular students. However, desktop computers and Internet connectivity, which were the drivers of e-learning technologies, were expensive, bulky and scarce. So when mobile technologies emerged, educationist saw an opportunity for addressing the limitations associated with correspondence, “e” and tethered learning. Mobile devices being cheap, portable and reliable received widespread acceptance and possession. So, educators, hardware designers and program developers started to design hardware and applications that would infuse learning content into the devices. The purpose of this review is to demonstrate the potential of mobile technologies in the education market place, highlighting global initiatives and trends. The paper will also review how universities around the world, Africa and in Kenya have oriented themselves for learning with mobile technologies. The study was a documentary analysis of virtual documents stored electronically for access through the Internet, text books, archival repositories and encyclopedias. The study observed a significant high global mobile ownership and usage rates, but was able to demonstrate that despite its pedagogical advantages, the use of the technology for learning purposes at university level is still at the infantry. Keywords: Mobile, Technologies, Universities, adoption, ICT, eLearning

  20. Remotely Piloted Innovation: Terrorism, Drones and Supportive Technology

    Science.gov (United States)

    2016-10-01

    Occupied Kashmir . We are developing the modern technology. We can make modern devices. Alhamdulilah.’” See Indictment, United States of America vs...Terrorists’ use of drones has certainly complicated some conflicts , but the use of this technology by terrorists has yet to change or significantly...alter the direction of any conflict , and so the broader impact of this tool thus far has been quite limited. Single drones have been used by terror

  1. Advanced Distributed Simulation Technology II (ADST II) High Level Architecture Support Experiments

    National Research Council Canada - National Science Library

    1998-01-01

    The purpose of the High Level Architecture (HLA) Support Experiments (HSE) project was to perform experimentation and research in HLA technology to support the evolution and further implementation of the HLA specifications...

  2. 75 FR 57520 - NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and Technology Working...

    Science.gov (United States)

    2010-09-21

    ... SPACE ADMINISTRATION NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and..., the National Aeronautics and Space Administration announces a meeting of the Supporting Research and Technology Working Group of the Planetary Science Subcommittee of the NASA Advisory Council. DATED: Wednesday...

  3. Technology Support for Discussion Based Learning: From Computer Supported Collaborative Learning to the Future of Massive Open Online Courses

    Science.gov (United States)

    Rosé, Carolyn Penstein; Ferschke, Oliver

    2016-01-01

    This article offers a vision for technology supported collaborative and discussion-based learning at scale. It begins with historical work in the area of tutorial dialogue systems. It traces the history of that area of the field of Artificial Intelligence in Education as it has made an impact on the field of Computer-Supported Collaborative…

  4. Providing information communication technology-based support to ...

    African Journals Online (AJOL)

    Student support is a major factor in distance education. This study was concerned with the use of ICT as a medium for providing student support at the University of Zambia. It was necessary to study the factors that would affect the application of ICT, in order to inform policy makers and managers of distance education which ...

  5. Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and Infrastructure Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-08-01

    This report documents the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Hydrogen, Fuel Cells and Infrastructure Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  6. An Intelligent Approach for Handover Decision in Heterogeneous Wireless Environment

    OpenAIRE

    Manoj Sharma; R.K.Khola

    2010-01-01

    Vertical handoff is the basic requirement of the convergence of different access technologies. It is also the key characteristic and technology of overlay wireless network with appropriate network interfaces. The integration of diverse but complementary cellular and wireless technologies in the next generation wireless networks requires the design of intelligent vertical handoff decision algorithms to enable mobile users equipped with contemporary multi-interfaced mobile terminals to seamless...

  7. A project in support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho (and others)

    2005-12-15

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate.

  8. Gas-turbine critical research and advanced technology support project

    Science.gov (United States)

    Clark, J. S.; Lowell, C. E.; Niedzwiecki, R. W.; Nainiger, J. J.

    1979-01-01

    The technical progress made during the first 15 months of a planned 40-month project to provide a critical-technology data base for utility gas-turbine systems capable of burning coal-derived fuels is summarized. Tasks were included in the following areas: (1) combustion, to study the combustion of coal-derived fuels and conversion of fuel-bound nitrogen to NOx; (2) materials, to understand and prevent hot corrosion; and (3) system studies, to integrate and guide the other technologies. Significant progress was made.

  9. Experiences with Lab-on-a-chip Technology in Support of NASA Supported Research

    Science.gov (United States)

    Monaco, Lisa

    2003-01-01

    Under the auspices of the Microgravity Sciences and Application Department at Marshall Space Flight Center, we have custom designed and fabricated a lab-on-a-chip (LOC) device, along with Caliper Technologies, for macromolecular crystal growth. The chip has been designed to deliver specified proportions of up-to five various constituents to one of two growth wells (on-chip) for crystal growth. To date, we have grown crystals of thaumatin, glucose isomerase and appoferitin on the chip. The LOC approach offered many advantages that rendered it highly suitable for space based hardware to perform crystal growth on the International Space Station. The same hardware that was utilized for the crystal growth investigations, has also been used by researchers at Glenn Research Center to investigate aspects of microfluidic phenomenon associated with two-phase flow. Additionally, our LOCAD (Lab-on-a-chip Application Development) team has lent its support to Johnson Space Center s Modular Assay for Solar System Exploration project. At present, the LOCAD team is working on the design and build of a unique lab-on-a-chip breadboard control unit whose function is not commercially available. The breadboard can be used as a test bed for the development of chip size labs for environmental monitoring, crew health monitoring assays, extended flight pharmacological preparations, and many more areas. This unique control unit will be configured for local use and/or remote operation, via the Internet, by other NASA centers. The lab-on-a-chip control unit is being developed with the primary goal of meeting Agency level strategic goals.

  10. Increasing Students' Involvement in Technology-Supported Mathematics Lesson Sequences

    Science.gov (United States)

    Prodromou, Theodosia; Lavicza, Zsolt; Koren, Balazs

    2015-01-01

    This article aims to report on a pilot or proof of concept study with experienced Hungarian teachers who introduced mathematical concepts through a sequence of lessons utilising a pedagogical framework (Lavicza, Hohenwarter, Jones, Lu and Dawes, 2009a and Lavicza, Hohenwarter and Lu 2009b) for general technology integration. Our aim was to examine…

  11. Supported eText: Assistive Technology through Text Transformations

    Science.gov (United States)

    Anderson-Inman, Lynne; Horney, Mark A.

    2007-01-01

    To gain meaningful access to the curriculum, students with reading difficulties must overcome substantial barriers imposed by the printed materials they are asked to read. Technology can assist students to overcome these challenges by enabling a shift from printed text to electronic text. By electronic text it means textual material read using a…

  12. use of technology for supporting and developing the national open ...

    African Journals Online (AJOL)

    Emeka Egbochuku

    students registered into various academic programmes. Consequently, the entire population of ... which various units of the University utilises technology so as to be in constant touch with students in providing ... restricted areas while at the same time, keeping record of staff movement. Other reasons for movement restriction ...

  13. A Case Study of School Technology Support Networks

    Science.gov (United States)

    Hiltz, John R.

    2011-01-01

    Since the last decade of the 20th Century, there has been an effort to integrate technology into classroom instruction. The success of this effort has been uneven, as teachers have resisted this change. There has been a great deal of recent research on the importance of teacher-to-teacher interactions and successful organizational change. This…

  14. Formal Abstraction in Engineering Education--Challenges and Technology Support

    Science.gov (United States)

    Neuper, Walther A.

    2017-01-01

    This is a position paper in the field of Engineering Education, which is at the very beginning in Europe. It relates challenges in the new field to the emerging technology of (Computer) Theorem Proving (TP). Experience shows, that "teaching" abstract models, for instance the wave equation in mechanical engineering and in electrical…

  15. A framework of technology-supported emotion measurement

    NARCIS (Netherlands)

    Thoring, K.C.; Bellermann, Frederik; Mueller, Roland M.; Badke-Schaub, P.G.; Desmet, P.M.A.; Desmet, P.M.A.; Fokkinga, S.F.; Ludden, G.D.S.; Cila, N.; Van Zuthem, H.

    2016-01-01

    Emotion measurement is a vital aspect for new product development and product improvements (see e.g. P. Desmet & Schifferstein, 2012). Nowadays, new technological devices, data mining, and social media offer many opportunities to invigorate design research. This paper tries to combine both

  16. Using Mobile Technology to Support Literacy Coaching Practices

    Science.gov (United States)

    Bates, C. C.; Martin, Aqueasha

    2013-01-01

    This article examines literacy coaches' (n = 7) digital note-taking practices using mobile technology and their influence on reflective practice. The study, which employed a design-based approach, investigated the coaches' transition from note-taking by paper and pencil to the note-taking application Evernote. Data included interviews with the…

  17. Supporting medical technology development with the analytic hierarchy process

    NARCIS (Netherlands)

    Hummel, J. Marjan

    2001-01-01

    This thesis aims to develop an adequate method of CTA to influence decision making about the development and clinical application of a medical technology. The adequacy of this method is related to the timing of its application, the information used in the assessment, the consensus formation about,

  18. Supporting Striving Readers through Technology-Based Instruction

    Science.gov (United States)

    Laverick, DeAnna M.

    2014-01-01

    The purpose of this research was to determine if reading specialist candidates improve the reading proficiency of their students through the use of digital, technology-based teaching techniques and materials. The candidates were certified teachers who provided individualized and small-group instruction to K-6 children while the candidates were…

  19. Supporting Teachers Developing Mathematical Tasks with Digital Technology

    Science.gov (United States)

    Ratnayake, Iresha; Oates, Greg; Thomas, Mike

    2016-01-01

    A crucial step towards improving the conceptual use of digital technology (DT) in the mathematics classroom is to increase teacher involvement in the development of tasks. Hence, this research considers some teacher factors that might influence DT algebra task development and implementation in secondary schools. We observed and assisted one group…

  20. Analytical Study of QoS-Oriented Multicast in Wireless Networks

    Directory of Open Access Journals (Sweden)

    Lyakhov Andrey

    2011-01-01

    Full Text Available Multicast is a very popular bandwidth-conserving technology exploited in many multimedia applications. However, existing standards of high rate wireless networks provide no error recovery mechanism (ARQ for multicast traffic. ARQ absence in wireless networks unreliable by their nature leads to frequent packet losses, which is inappropriate for most of multimedia applications. In this paper, we study new reliable multicast mechanism proposed recently to support multimedia QoS (packet loss ratio, latency, and throughput with various wireless technologies. This mechanism is based on the concept of multiple ACK-leaders, that is, multicast recipients responsible for acknowledging data packets. We develop analytical models of the mechanism with various leader selection schemes and use the models to study the schemes efficiency and to optimize them. Numerical results show that the novel multicast mechanism with multiple ACK-leaders can be easily tuned to meet specific QoS requirements of multimedia or any other multicast applications.