WorldWideScience

Sample records for wing 6th floor

  1. Waste Assessment Baseline for the IPOC Second Floor, West Wing

    Energy Technology Data Exchange (ETDEWEB)

    McCord, Samuel A [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Waste Management and Pollution Prevention

    2015-04-01

    Following a building-wide waste assessment in September, 2014, and subsequent presentation to Sandia leadership regarding the goal of Zero Waste by 2025, the occupants of the IPOC Second Floor, West Wing contacted the Materials Sustainability and Pollution Prevention (MSP2) team to guide them to Zero Waste in advance of the rest of the site. The occupants are from Center 3600, Public Relations and Communications , and Center 800, Independent Audit, Ethics and Business Conduct . To accomplish this, MSP2 conducted a new limited waste assessment from March 2-6, 2015 to compare the second floor, west wing to the building as a whole. The assessment also serves as a baseline with which to mark improvements in diversion in approximately 6 months.

  2. Study of the Effects on Student Knowledge and Perceptions of Activities Related to Submetering the 6th Grade Wing of a Middle School, to Displaying the Carbon Footprint, and to Efforts to Reduce Energy Consumption and Greenhouse Gases

    Science.gov (United States)

    Peck, Rick

    2009-01-01

    The purpose of the study was to determine the effects upon student knowledge and perceptions regarding greenhouse gas emissions as a result of an intervention relying upon the submetering the 6th grade wing of a Middle School, displaying the information regarding electrical consumption and carbon footprint, and reducing the electrical consumption…

  3. 6th ICSAT

    CERN Document Server

    Subic, Aleksandar; Wellnitz, Jörg

    2015-01-01

    This volume collects the research papers presented at the 6th International Conference on Sustainable Automotive Technologies (ICSAT), Gothenburg, 2014. The topical focus lies on latest advances in vehicle technology related to sustainable mobility. ICSAT is the core and state-of-the-art conference in the field of new technologies for transportation. Research contributions from the US, Australia, Europe and Asia illustrate the pivotal role of the conference. The book provides an excellent overview of R&D activities at OEMs as well as in leading universities and laboratories.

  4. 27 February 2012- Thai Minister of Science and Technology P. Suraswadi with International Relations Adviser E. Tsesmelis and CMS Collaboration Former Deputy Spokesperson A. De Roeck signing the guest book in the 6th floor conference room, building 60 and visiting CMS underground experimental area at LHC Point 5.

    CERN Multimedia

    Maximilien Brice

    2012-01-01

    27 February 2012- Thai Minister of Science and Technology P. Suraswadi with International Relations Adviser E. Tsesmelis and CMS Collaboration Former Deputy Spokesperson A. De Roeck signing the guest book in the 6th floor conference room, building 60 and visiting CMS underground experimental area at LHC Point 5.

  5. 6th International Cryocoolers Conference

    CERN Document Server

    Knox, Margaret

    1991-01-01

    Cryocoolers 6 archives developments and performance measurements in the field of cryocoolers based on the contributions of leading international experts at the 6th International Cryocooler Conference that was held in Plymouth, Massachusetts, on October 25-26, 1990. This year's conference consisted of 54 papers and was sponsored by the David Taylor Naval Ship Research and Development Center of Annapolis, Maryland. The conference proceedings containing 49 submitted manuscripts was published by the David Taylor Naval Ship Research and Development Center in the report reproduced here.

  6. 6th Asian Physics Symposium

    International Nuclear Information System (INIS)

    2016-01-01

    Preface: The 6th Asian Physics Symposium 2015 (APS 2015) The 6th Asian Physics Symposium 2015 (APS 2015) is organized by the Physics Department, Faculty of Mathematics and Natural Sciences, Bandung Institute of Technology, in collaboration with HFI (Indonesian Physical Society), PAPSI (Physics and Applied Physics Society of Indonesia), HANI (Indonesian Nuclear Scientist Society), HRMI (Indonesian Material Research Society), HAGI (Indonesian Geophysicist Society) - West Java Chapter, and HFMBI (Indonesian Medical Physicist and Biophysicist Society). APS 2015 is aimed at providing a forum of scientific communication and interaction among distinguished scientists working in physics and its related fields. In this scientific event the latest research will be presented, and state-of-the-art developments in the field discussed, to help to guide our future research directions. It is also designed to offer the opportunity for young Indonesian scientists and students to make direct contacts with well-known scientists abroad and thereby foster the existing research collaborations and extend international research networking for the future. The scope of research presented and discussed in this symposium covers theoretical high energy physics, materials sciences and technology, biophysics and medical physics, nuclear science and engineering, earth and planetary sciences, computational physics, instrumentation and measurement, physics education, and interdisciplinary physics. The program of APS 2016 features 6 invited talks and 208 contributed oral presentations, which come from 7 different countries: Japan, South Korea, Singapore, Malaysia, Iraq, Ethiopia, and Indonesia. All papers have been reviewed after they are presented in this event. Selected papers are published in this Institute of Physics (IoP) Conference Series. Finally, I would like to express my sincere appreciation to all of authors for their valuable contributions and also to the members of the committee for

  7. 6th International Microbeam Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Dr Kevin M. Prise

    2004-01-01

    The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology.

  8. 6th International Immunoglobulin Symposium: poster presentations

    NARCIS (Netherlands)

    Fernandez-Cruz, E.; Kaveri, S. V.; Peter, H.-H.; Durandy, A.; Cantoni, N.; Quinti, I.; Sorensen, R.; Bussel, J. B.; Danieli, M. G.; Winkelmann, A.; Bayry, J.; Käsermann, F.; Späth, P.; Helbert, M.; Salama, A.; van Schaik, I. N.; Yuki, N.

    2009-01-01

    The posters presented at the 6th International Immunoglobulin Symposium covered a wide range of fields and included both basic science and clinical research. From the abstracts accepted for poster presentation, 12 abstracts were selected for oral presentations in three parallel sessions on

  9. 6th International Immunoglobulin Symposium: Poster presentations

    NARCIS (Netherlands)

    Fernandez-Cruz, E.; Kaveri, S.V.; Peter, H.H.; Durandy, A.; Cantoni, N.; Quinti, I.; Sorensen, R.; Bussel, J.B.; Danieli, M.G.; Winkelmann, A.; Bayry, J.; Kaesermann, F.; Spaeth, P.; Helbert, M.; Salama, A.; van Schaik, I.N.; Yuki, N.

    2009-01-01

    P>The posters presented at the 6th International Immunoglobulin Symposium covered a wide range of fields and included both basic science and clinical research. From the abstracts accepted for poster presentation, 12 abstracts were selected for oral presentations in three parallel sessions on

  10. Kids & Family Reading Report™. 6th Edition

    Science.gov (United States)

    Scholastic Inc., 2017

    2017-01-01

    This report presents the 6th Edition of Scholastic's biannual study of children's and parents' attitudes and behaviors about reading. The latest research touches on: (1) Reading Books for Fun; (2) Reading Aloud; (3) Summer Reading; and (4) Favorite Children's Books. This research provides both reasons to celebrate as well as a strong motivation to…

  11. 6th iTi Conference

    CERN Document Server

    Kampers, Gerrit; Oberlack, Martin; Wacławczyk, Marta; Talamelli, Alessandro

    2016-01-01

    This volume collects the edited and reviewed contributions presented in the 6th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume has been produced after the conference so that the authors had the possibility to incorporate comments and discussions raised during the meeting. In the present book the contributions have been structured according to the topics : I Theory II Wall bounded flows III Particles in flows IV Free flows V Complex flows The volume is dedicated to the memory of Prof. Konrad Bajer who prematurely passed away in Warsaw on August 29, 2014. .

  12. 6th interventional MRI symposium. Abstracts

    International Nuclear Information System (INIS)

    2006-01-01

    The ongoing progress in the field of interventional MRI and the great success of our last symposium 2004 in Boston have stimulated us to organize the 6th Interventional MRI Symposium to be held September 15-16, 2006 in Leipzig. This meeting will highlight ground-breaking research as well as cutting-edge reports from many groups. The symposium also provides a forum to network with leaders and innovators in the field. Session topics are: intraoperative MRI, vascular applications, targeted drug delivery, cryotherapy, thermometry, pulse sequences, LITT, percutaneous procedures, navigation, robotics, focused ultrasound. (uke)

  13. 6th International Symposium on Thermal Expansion

    CERN Document Server

    1978-01-01

    This 6th International Symposium on Thermal Expansion, the first outside the USA, was held on August 29-31, 1977 at the Gull Harbour Resort on Hecla Island, Manitoba, Canada. Symposium Chairman was Ian D. Peggs, Atomic Energy of Canada Limited, and our continuing sponsor was CINDAS/Purdue University. We made considerable efforts to broaden the base this year to include more users of expansion data but with little success. We were successful, however, in establishing a session on liquids, an area which is receiving more attention as a logical extension to the high-speed thermophysical property measurements on materials at temperatures close to their melting points. The Symposium had good international representation but the overall attendance was, disappointingly, relatively low. Neverthe­ less, this enhanced the informal atmosphere throughout the meeting with a resultant frank exchange of information and ideas which all attendees appreciated. A totally new item this year was the presentation of a bursary to ...

  14. 6th International Parallel Tools Workshop

    CERN Document Server

    Brinkmann, Steffen; Gracia, José; Resch, Michael; Nagel, Wolfgang

    2013-01-01

    The latest advances in the High Performance Computing hardware have significantly raised the level of available compute performance. At the same time, the growing hardware capabilities of modern supercomputing architectures have caused an increasing complexity of the parallel application development. Despite numerous efforts to improve and simplify parallel programming, there is still a lot of manual debugging and  tuning work required. This process  is supported by special software tools, facilitating debugging, performance analysis, and optimization and thus  making a major contribution to the development of  robust and efficient parallel software. This book introduces a selection of the tools, which were presented and discussed at the 6th International Parallel Tools Workshop, held in Stuttgart, Germany, 25-26 September 2012.

  15. 6th International Conference on Paleoceanography

    CERN Document Server

    Mix, Alan

    1999-01-01

    This volume is one outcome of the 6th International Conference on Paleoceano­ graphy (ICP VI). The conference was held August 23-28, 1998 in Lisbon, Portugal. The meeting followed the traditional format of a small number of invited oral presentations complemented by a large number ofcontributed posters. Over 550 participants attended, representing thirty countries and nearly 450 posters were presented. The invited speakers addressed the main themes of the 5oral sessions. The session topics were: Polar-Tropical and Interhemisphere Linkages; Does the Ocean Cause, or Respond to, Abrupt Climatic Changes?; Biotic Responses to Major Paleoceanographic Changes; Past Warm Climates; and Innovations In Monitoring Ocean History. This is the first time in ICP history that the Conference Proceedings are published. The aim of the organisers with the publication of this book is two-fold: to provide a useful review of the field and to document the ideas/controversies raised during the con­ ference that may stimulate future ...

  16. 6th International Workshop Soft Computing Applications

    CERN Document Server

    Jain, Lakhmi; Kovačević, Branko

    2016-01-01

    These volumes constitute the Proceedings of the 6th International Workshop on Soft Computing Applications, or SOFA 2014, held on 24-26 July 2014 in Timisoara, Romania. This edition was organized by the University of Belgrade, Serbia in conjunction with Romanian Society of Control Engineering and Technical Informatics (SRAIT) - Arad Section, The General Association of Engineers in Romania - Arad Section, Institute of Computer Science, Iasi Branch of the Romanian Academy and IEEE Romanian Section.                 The Soft Computing concept was introduced by Lotfi Zadeh in 1991 and serves to highlight the emergence of computing methodologies in which the accent is on exploiting the tolerance for imprecision and uncertainty to achieve tractability, robustness and low solution cost. Soft computing facilitates the use of fuzzy logic, neurocomputing, evolutionary computing and probabilistic computing in combination, leading to the concept of hybrid intelligent systems.        The combination of ...

  17. 6th International Symposium on Ambient Intelligence

    CERN Document Server

    Novais, Paulo; Pereira, António; González, Gabriel; Fernández-Caballero, Antonio

    2015-01-01

    This volume contains the proceedings of the 6th International Symposium on Ambient Intelligence (ISAmI 2015), held in Salamanca, Spain on June 3th-5th at the University of Salamanca. After a careful review, 27 papers from 10 different countries were selected to be presented in ISAmI 2015 at the conference and published in the proceedings.  ISAmI has been running annually and aiming to bring together researchers from various disciplines that constitute the scientific field of Ambient Intelligence to present and discuss the latest results, new ideas, projects and lessons learned, namely in terms of software and applications, and aims to bring together researchers from various disciplines that are interested in all aspects of this area. Ambient Intelligence is a recent paradigm emerging from Artificial Intelligence, where computers are used as proactive tools assisting people with their day-to-day activities, making everyone’s life more comfortable. Another main concern of AmI originates from the human comput...

  18. 6th International Conference on Emerging Zoonoses.

    Science.gov (United States)

    Kahn, R E; Morozov, I; Feldmann, H; Richt, J A

    2012-09-01

    The 6th International Conference on Emerging Zoonoses, held at Cancun, Mexico, 24-27 February 2011, offered 84 participants from 18 countries, a snapshot of current research in numerous zoonoses caused by viruses, bacteria or prions. Co-chaired by Professors Heinz Feldmann and Jürgen Richt, the conference explored 10 topics: (i) The ecology of emerging zoonotic diseases; (ii) The role of wildlife in emerging zoonoses; (iii) Cross-species transmission of zoonotic pathogens; (iv) Emerging and neglected influenza viruses; (v) Haemorrhagic fever viruses; (vi) Emerging bacterial diseases; (vii) Outbreak responses to zoonotic diseases; (viii) Food-borne zoonotic diseases; (ix) Prion diseases; and (x) Modelling and prediction of emergence of zoonoses. Human medicine, veterinary medicine and environmental challenges are viewed as a unity, which must be considered under the umbrella of 'One Health'. Several presentations attempted to integrate the insights gained from field data with mathematical models in the search for effective control measures of specific zoonoses. The overriding objective of the research presentations was to create, improve and use the tools essential to address the risk of contagions in a globalized society. In seeking to fulfil this objective, a three-step approach has often been applied: (i) use cultured cells, model and natural animal hosts and human clinical models to study infection; (ii) combine traditional histopathological and biochemical approaches with functional genomics, proteomics and computational biology; and (iii) obtain signatures of virulence and insights into mechanisms of host defense response, immune evasion and pathogenesis. This meeting review summarizes 39 of the conference presentations and mentions briefly the 16 articles in this Special Supplement, most of which were presented at the conference in earlier versions. The full affiliations of all presenters and many colleagues have been included to facilitate further inquiries

  19. 6th International Meshing Roundtable '97

    Energy Technology Data Exchange (ETDEWEB)

    White, D.

    1997-09-01

    The goal of the 6th International Meshing Roundtable is to bring together researchers and developers from industry, academia, and government labs in a stimulating, open environment for the exchange of technical information related to the meshing process. In the pas~ the Roundtable has enjoyed significant participation born each of these groups from a wide variety of countries. The Roundtable will consist of technical presentations from contributed papers and abstracts, two invited speakers, and two invited panels of experts discussing topics related to the development and use of automatic mesh generation tools. In addition, this year we will feature a "Bring Your Best Mesh" competition and poster session to encourage discussion and participation from a wide variety of mesh generation tool users. The schedule and evening social events are designed to provide numerous opportunities for informal dialog. A proceedings will be published by Sandia National Laboratories and distributed at the Roundtable. In addition, papers of exceptionally high quaIity will be submitted to a special issue of the International Journal of Computational Geometry and Applications. Papers and one page abstracts were sought that present original results on the meshing process. Potential topics include but are got limited to: Unstructured triangular and tetrahedral mesh generation Unstructured quadrilateral and hexahedral mesh generation Automated blocking and structured mesh generation Mixed element meshing Surface mesh generation Geometry decomposition and clean-up techniques Geometry modification techniques related to meshing Adaptive mesh refinement and mesh quality control Mesh visualization Special purpose meshing algorithms for particular applications Theoretical or novel ideas with practical potential Technical presentations from industrial researchers.

  20. Working Together for Student Achievement. 6th Biennial Joint Report

    Science.gov (United States)

    Washington State Board of Education, 2016

    2016-01-01

    The Washington State Board of Education (SBE) and the Professional Educator Standards Board (PESB) submitted this 6th biennial joint report to the Governor, Legislative Education Committees, and Superintendent of Public Instruction. The report outlines the collaborative work of the Boards, highlights accomplishments, and provides goals and…

  1. Environmental Problem Perception of 6th Grade Students

    Science.gov (United States)

    Genc, Murat; Genc, Tulin; Ergenc, Mustafa; Erkuz, Neslihan

    2016-01-01

    This study aims to examine and compare the 6th grade students' perception of environmental issues through different techniques. For this purpose, we have tried to establish the students' perception of environmental issues by studying the pictures they drew and the written texts they wrote. In this study, where we have conducted with 62 students in…

  2. Fish-eye view from 6th floor of Main Building towards Jura

    CERN Multimedia

    1977-01-01

    Main Auditorium, Bld 2, Main Mechanical Workshop. Behind, one sees the buildings for the 2-m Bubble Chamber with the safety sphere, and the experimental East Hall at the PS. At the horizon is the water tower closed to ISR.

  3. Proceedings of the 6th nuclear science and technology conference

    International Nuclear Information System (INIS)

    1996-12-01

    The 6th conference on nuclear science and technology was held on 2 - 4 December, 1996 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

  4. 6th Krakow-Winnipeg Conference on Advanced Bioimaging Technologies

    International Nuclear Information System (INIS)

    2011-09-01

    Starting from 1997 researchers have been meet in Krakow, Poland for the Krakow-Winnipeg conference on MRI. The scope of the conference includes the latest technical advances in biomedical imaging including molecular imaging and nanotechnology. Other topics for presentation include recent developments in whole body MRI, multi-transmit technology and gradient-free MRI. Book of Abstracts from the 6 th Conference contains 29 abstracts of Oral Presentations and 11 abstracts of Posters.

  5. 6th International Conference on Pattern Recognition and Machine Intelligence

    CERN Document Server

    Gawrysiak, Piotr; Kryszkiewicz, Marzena; Rybiński, Henryk

    2016-01-01

    This book presents valuable contributions devoted to practical applications of Machine Intelligence and Big Data in various branches of the industry. All the contributions are extended versions of presentations delivered at the Industrial Session the 6th International Conference on Pattern Recognition and Machine Intelligence (PREMI 2015) held in Warsaw, Poland at June 30- July 3, 2015, which passed through a rigorous reviewing process. The contributions address real world problems and show innovative solutions used to solve them. This volume will serve as a bridge between researchers and practitioners, as well as between different industry branches, which can benefit from sharing ideas and results.

  6. 6th International Conference on Computer Science and its Applications

    CERN Document Server

    Stojmenovic, Ivan; Jeong, Hwa; Yi, Gangman

    2015-01-01

    The 6th FTRA International Conference on Computer Science and its Applications (CSA-14) will be held in Guam, USA, Dec. 17 - 19, 2014. CSA-14 presents a comprehensive conference focused on the various aspects of advances in engineering systems in computer science, and applications, including ubiquitous computing, U-Health care system, Big Data, UI/UX for human-centric computing, Computing Service, Bioinformatics and Bio-Inspired Computing and will show recent advances on various aspects of computing technology, Ubiquitous Computing Services and its application.

  7. Report from the 6th Workshop on Extremely Large Databases

    Directory of Open Access Journals (Sweden)

    Daniel Liwei Wang

    2013-05-01

    Full Text Available Petascale data management and analysis remain one of the main unresolved challenges in today's computing. The 6th Extremely Large Databases workshop was convened alongside the XLDB conference to discuss the challenges in the health care, biology, and natural resources communities. The role of cloud computing, the dominance of file-based solutions in science applications, in-situ and predictive analysis, and commercial software use in academic environments were discussed in depth as well. This paper summarizes the discussions of this workshop.

  8. Floor interaction

    DEFF Research Database (Denmark)

    Petersen, Marianne Graves; Krogh, Peter; Ludvigsen, Martin

    2005-01-01

    Within architecture, there is a long tradition of careful design of floors. The design has been concerned with both decorating floors and designing floors to carry information. Ubiquitous computing technology offers new opportunities for designing interactive floors. This paper presents three...... different interactive floor concepts. Through an urban perspective it draws upon the experiences of floors in architecture, and provides a set of design issues for designing interactive floors....

  9. 6th Japan Bioanalysis Forum Symposium: challenge of regulated bioanalysis.

    Science.gov (United States)

    Igarashi, Harue

    2015-01-01

    Biomarker measurement and LC-MS analysis of large molecule pharmaceuticals (LM-MS) are becoming increasingly important in pharmaceutical development, although they are not included in the existing bioanalytical method validation guidelines in Japan. The 6th Japan Bioanalysis Forum symposium presented challenges regarding biomarkers and LM-MS, as well as the current circumstances for regulated bioanalysis, by inviting speakers from Japan, the USA, European Union and Asia-pacific. Japan Bioanalysis Forum discussion groups also presented their outcomes and openly discussed these with the attendees - over 200 dedicated individuals from industry, regulatory agencies and academia. The symposium successfully reinforced the idea that fit-for-purpose approaches are necessary, and that science should drive any judgments and actions throughout drug development.

  10. 6th Conference on Design and Modeling of Mechanical Systems

    CERN Document Server

    Fakhfakh, Tahar; Daly, Hachmi; Aifaoui, Nizar; Chaari, Fakher

    2015-01-01

    This book offers a collection of original peer-reviewed contributions presented at the 6th International Congress on Design and Modeling of Mechanical Systems (CMSM’2015), held in Hammamet, Tunisia, from the 23rd to the 25th of March 2015. It reports on both recent research findings and innovative industrial applications in the fields of mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, and design and manufacturing of mechanical systems. Since its first edition in 2005, the CMSM Congress has been held every two years with the aim of bringing together specialists from universities and industry to present the state-of-the-art in research and applications, discuss the most recent findings and exchange and develop expertise in the field of design and modeling of mechanical systems. The CMSM Congress is jointly organized by three Tunisian research laboratories: the Mechanical Engineering Laboratory of th...

  11. 6th International Image Processing and Communications Conference

    CERN Document Server

    2015-01-01

    This book collects a series of research papers in the area of Image Processing and Communications which not only introduce a summary of current technology but also give an outlook of potential feature problems in this area. The key objective of the book is to provide a collection of comprehensive references on some recent theoretical development as well as novel applications in image processing and communications. The book is divided into two parts and presents the proceedings of the 6th International Image Processing and Communications Conference (IP&C 2014) held in Bydgoszcz, 10-12 September 2014. Part I deals with image processing. A comprehensive survey of different methods  of image processing, computer vision  is also presented. Part II deals with the telecommunications networks and computer networks. Applications in these areas are considered.

  12. Proceedings of the 6th symposium on advanced photon research

    International Nuclear Information System (INIS)

    2005-06-01

    The 6th Symposium on Advanced Photon Research was held at JAERI-Kansai in Kyoto on November 4-5, 2004. The symposium has been held once a year since 1999, to promote the advanced photon research through speeches, information exchanges, discussion by researchers on the front line of advanced photon research in Japan and abroad, not only reports of latest research results and plans at Advanced Photon Research Center. The numbers of speeches were 16, including 5 invited speeches, and the numbers of poster presentations were 56, including the report of presentations and cooperative research and joint research performed in FY2003. The 56 of the presented papers are indexed individually. (J.P.N.)

  13. 6th International Workshop on Compositional Data Analysis

    CERN Document Server

    Thió-Henestrosa, Santiago

    2016-01-01

    The authoritative contributions gathered in this volume reflect the state of the art in compositional data analysis (CoDa). The respective chapters cover all aspects of CoDa, ranging from mathematical theory, statistical methods and techniques to its broad range of applications in geochemistry, the life sciences and other disciplines. The selected and peer-reviewed papers were originally presented at the 6th International Workshop on Compositional Data Analysis, CoDaWork 2015, held in L’Escala (Girona), Spain. Compositional data is defined as vectors of positive components and constant sum, and, more generally, all those vectors representing parts of a whole which only carry relative information. Examples of compositional data can be found in many different fields such as geology, chemistry, economics, medicine, ecology and sociology. As most of the classical statistical techniques are incoherent on compositions, in the 1980s John Aitchison proposed the log-ratio approach to CoDa. This became the foundation...

  14. Proceeding of 6th short conference on neutron radiography

    International Nuclear Information System (INIS)

    Katsurayama, Kohsuke; Hiraoka, Eiichi; Tsujimoto, Tadashi

    1984-01-01

    The 6th short conference on neutron radiography was held on August 30 and 31, 1983, at the Research Reactor Institute, Kyoto niversity, as a part of the joint research program of the Institute. During the period since the first meeting in November, 1970, steady development was made in both research and practical use of neutron radiography in Japan owing to the persistent effort of the persons concerned. In the conference, 70 persons participated, and 21 papers were presented. The problems treated were the apparatuses of neutron television, neutron radiography and neutron photography, the various application of neutron radiography, the standard of neutron radiography and others. The high value of neutron radiography and the increasing demand to use this technique were shown in this meeting. Considering the recent rapid development of new technology, it is expected that neutron radiography will find the wide varieties of application in the near future. The proceedings of the conference are published by collecting the gists of papers, hoping to enhance joint effort and the exchange of information to develop neutron radiography. (Kako, I.)

  15. 6th International Conference on Research into Design

    CERN Document Server

    Chakrabarti, Debkumar; ICoRD 2017; Research into design for communities

    2017-01-01

    This book showcases cutting-edge research papers from the 6th International Conference on Research into Design (ICoRD 2017) – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design for communities. While design traditionally focused on the development of products for the individual, the emerging consensus on working towards a more sustainable world demands greater attention to designing for and with communities, so as to promote their sustenance and harmony - within each community and across communities. The special features of the book are the insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the...

  16. PREFACE: 6th EEIGM International Conference on Advanced Materials Research

    Science.gov (United States)

    Horwat, David; Ayadi, Zoubir; Jamart, Brigitte

    2012-02-01

    The 6th EEIGM Conference on Advanced Materials Research (AMR 2011) was held at the European School of Materials Engineering (EEIGM) on the 7-8 November 2011 in Nancy, France. This biennial conference organized by the EEIGM is a wonderful opportunity for all scientists involved in the EEIGM programme, in the 'Erasmus Mundus' Advanced Materials Science and Engineering Master programme (AMASE) and the 'Erasmus Mundus' Doctoral Programme in Materials Science and Engineering (DocMASE), to present their research in the various fields of Materials Science and Engineering. This conference is also open to other universities who have strong links with the EEIGM and provides a forum for the exchange of ideas, co-operation and future orientations by means of regular presentations, posters and a round-table discussion. This edition of the conference included a round-table discussion on composite materials within the Interreg IVA project '+Composite'. Following the publication of the proceedings of AMR 2009 in Volume 5 of this journal, it is with great pleasure that we present this selection of articles to the readers of IOP Conference Series: Materials Science and Engineering. Once again it represents the interdisciplinary nature of Materials Science and Engineering, covering basic and applicative research on organic and composite materials, metallic materials and ceramics, and characterization methods. The editors are indebted to all the reviewers for reviewing the papers at very short notice. Special thanks are offered to the sponsors of the conference including EEIGM-Université de Lorraine, AMASE, DocMASE, Grand Nancy, Ville de Nancy, Region Lorraine, Fédération Jacques Villermaux, Conseil Général de Meurthe et Moselle, Casden and '+Composite'. Zoubir Ayadi, David Horwat and Brigitte Jamart

  17. Proceedings of the 6th European VLBI Network Symposium

    Science.gov (United States)

    Ros, Eduardo; Porcas, Richard W.; Lobanov, Andrei P.; Zensus, J. Anton

    This volume contains the papers presented at the 6th Symposium of the European VLBI Network, held in Bonn on 25-28 June 2002. The initial aim of these biennial gatherings of European VLBI practitioners was to review in a timely manner new results and technical developments related to Very Long Baseline Interferometry. Now, however, interest and participation in the EVN Symposia reaches far beyond Europe, reflecting the fact that scientific research and development programs are carried out to a high degree in international and often truly global collaborations. More than 120 scientists from around the world registered for participation in the Symposium. The Symposium was hosted by the Max-Planck-Institut für Radioastronomie and was held at the Gustav Stresemann Institut. In addition to the scientific sessions and poster presentations, the program included an EVN Users Meeting, an MPIfR versus Rest-of-the-World football match (highly appropriate given the competing World Cup event!), a visit to the MPIfR's 100m radio telescope in Effelsberg, and a Conference Dinner held in the nearby old walled town of Bad Müunstereifel. To maximize the usefulness of these proceedings (and possibly as a daring precedent) the Editors decided to demand the written versions of talks and posters and to complete the editorial work before the meeting, and to deliver the book to the participants at the beginning of the Symposium. We thank the authors for their cooperation in delivering publication-ready electronic manuscripts and for meeting the strict deadlines. It is highly gratifying that only a handful of the 100 presentations are not represented in this volume. The editors have made minor changes to some of the contributions in order to improve readability, and take responsibility for any errors arising from these changes. Besides the authors, many individuals have contributed to the preparation of the meeting and its proceedings. In addition to many members of the MPIfR staff, we

  18. The 6th European metallurgical conference EMC 2011: Proceedings review

    Directory of Open Access Journals (Sweden)

    Srećko R. Stopić

    2011-10-01

    Full Text Available The GDMB Society for Mining, Metallurgy, Resource and Environmental Technology organized the 6th European Metallurgical Conference (2011 in Duesseldorf from June 26 to 29, 2011. The same venue hosted the most important international metallurgical trade fairs for metallurgy of iron and steel, new casting and thermochemical processes METEC, GIFA, THERMOPROCESS and NEWCAST. The previous European metallurgical conferences were organized by GDMB in Friedrichshafen (2001, Hanover (2003, Leipzig (2005, Duesseldorf (2007, Innsbruck (2009. The GDMB is a non-profit organization situated in Clausthal in Germany, which is related to combining science with the practical experience in metallurgy, mining, materials engineering, mineral processing, recycling and refining of metals, and manufacturing of semi- and finishing products. The European Metallurgical conference EMC is one of the most known conferences worldwide in the field of non-ferrous metallurgy and is attended regularly by the decision makers from the industry and universities. The scientific program contained 6 plenary lectures and more than 160 presentations from 40 countries in 5 parallel series. An extensive poster exhibition was held, during which the authors had an opportunity to introduce their posters to the entire plenum as a part of a brief presentation. The best poster from the Montan-University in Leoben, Austria, was awarded the € 500 'Poster Award EMC 2011'. Not only were the most important European countries represented here, more than one third of the lecturers were from the non-European countries (Canada, Japan, China, USA, South Africa, Australia. The origin of the participants reflects the aim of the organizers: to make this conference a worldwide platform for the scientific exchange of experience and information. More than 400 participants from all over the world participated at this conference. The scientific presentations of the conference are presented in five Proceedings

  19. PREFACE: The 6th Nordic Meeting on Nuclear Physics

    Science.gov (United States)

    Løvhøiden, G.; Thorsteinsen, T. F.; Vaagen, J. S.

    1990-01-01

    After an unintended time gap of five years, the series of regular Nordic meetings on nuclear physics was continued with the 6th Nordic Meeting, August 10-15, 1989. The site was Utgarden in the outskirts of Kopervik, the administration center for the Saga island of Karmøy on the west-coast of Norway. Utgarden, a "peoples high-school'' with a kitchen, housing facility and a neighboring modern gymnasium with fine lecture halls, proved to be an inexpensive and adequate site for the meeting. From the time of the Vikings, the sound between Karmøyy and the mainland has been a vital part of the way to the north. Mobility and international orientation is still a signature of an area where today essential parts of Norway's oil- and metal industry are located. The conference program included a session on nuclear physics in industry and society, with contributed talks from a number of companies and technology/research institutions, which also sponsored the meeting. Lunch visits to Hydro's aluminium plant on Karmøy or alternatively to Statoil's gas terminal on the mainland, were included in the program. The scientific program gives a cross section of nuclear physics activities in which researchers from the Nordic countries are involved nowadays. The spectrum is rich, and the emphasis has shifted to higher energies than was the case five years ago. We appreciate the possibility to present this overview in a separate volume of Physica Scripta. The present issue covers nearly all the talks given at the meeting. The order deviates, however, somewhat from that of the conference program. The organizing committee tried to encourage in various ways the participation of young physicists; this effort was truely rewarded. The young participants put their imprint on the activities in the lecture halls and even more on the soccer arena. The meeting was sponsored by The University of Bergen, The Nordic Accelerator Committee, NORDITA, The Norwegian Research Council for Science and the

  20. Report of the 6th Tanzania Joint Annual Health Sector Review 4th-6th April 2005 Kunduchi Beach Hotel,Dar es Salaam

    OpenAIRE

    Smithson, Paul

    2005-01-01

    The 6th Annual Joint Health Sector Review was concluded successfully at Kunduchi Beach hotel,between 4th and 6th April 2005. It was preceded by a Technical preparatory meeting, held at Belinda Hotel. This year’s was the largest review yet, with over 200 participants. As well as government and donor representatives, the meeting was attended by a variety of civil society and NGO representatives. The Honourable Minister of Health opened the meeting. Judged by the milestones, performance over t...

  1. 'Six Floors' of Detainee Operations in the Post-9/11 World

    National Research Council Canada - National Science Library

    Ayres, Thomas E

    2005-01-01

    .... On the 6th floor are easily identifiable enemy prisoners of war. POWs openly wear the uniform of a power that abides by the laws of war, and are accorded all privileges specified in Geneva III...

  2. Report of the 6th Tanzania Joint Annual Health Sector Review

    OpenAIRE

    Smithson, Paul

    2005-01-01

    The 6th Annual Joint Health Sector Review was concluded successfully at Kunduchi Beach hotel, between 4th and 6th April 2005. It was preceded by a Technical preparatory meeting, held at Belinda Hotel. This year’s was the largest Review yet, with over 200 participants. As well as government and donor representatives, the meeting was attended by a variety of civil society and NGO representatives. The Honourable Minister of Health opened the meeting. Judged by the milestones, performance over th...

  3. The information revolution: information systems and the 6th Kondratieff cycle

    OpenAIRE

    Adams, Carl; Mouatt, S.

    2010-01-01

    This theoretical paper critically assesses existing long wave discourse which classifies the current set of innovation surges as part of a 5th Kondratieff cycle, with the 6th likely to be based on nanotechnologies or bio-medical technologies. Kondratieff long wave theory provides a strong cognitive tool to examine such innovation surges. This paper argues that the existing discourse is incorrect: the 5th Kondratieff cycle should be classed as the age of computing while the 6th should be class...

  4. Comparing the knowledge of contraceptives among 1st and 6th year students

    OpenAIRE

    Miran, Mona

    2016-01-01

    Author: Mona Miran Thesis: Comparing the knowledge of contraceptives among 1st and 6th year students. Aim: To explore the knowledge about contraceptives when students are in first year of their medical studies and when the students are in their last year of medical studies. Objectives: 1. To asses the knowledge about contraceptives among medical international and Lithuanian students of LUHS. 2. To measure the usage and experience of contraceptives among 1st and 6th year medic...

  5. 6th Congress of Croatian and Hungarian and 17th Congress of Hungarian Geomathematicians

    Directory of Open Access Journals (Sweden)

    Željka Tutek

    2014-06-01

    Full Text Available The theme of this year's 6th Congress of Croatian and Hungarian and 17th Congress of Hungarian Geomathematicians was Geomathematics – from theory to practice and its key topics were • Applied geomathematics (geosciences, environmental science • Geomathematics in reservoir characterization and modelling • Hydrological and hydrogeological modelling • Theoretical geomathematics (geostatistics, neural networks, statistics • Geoinformatics (including GIS.

  6. Proceedings of the 6th Computer Science On-line Conference 2017

    CERN Document Server

    Senkerik, Roman; Oplatkova, Zuzana; Prokopova, Zdenka; Silhavy, Petr

    2017-01-01

    This book presents new methods and approaches to real-world problems as well as exploratory research that describes novel artificial intelligence applications, including deep learning, neural networks and hybrid algorithms. This book constitutes the refereed proceedings of the Artificial Intelligence Trends in Intelligent Systems Section of the 6th Computer Science On-line Conference 2017 (CSOC 2017), held in April 2017. .

  7. THE MAIN PSYCHOLOGICAL AND PEDAGOGICAL REQUIREMENTS OF INFORMATICS TEXTBOOKS FOR 6TH

    Directory of Open Access Journals (Sweden)

    Popel M.

    2017-03-01

    Full Text Available In the article the psychological characteristics of pupils 6th grade: rapid psychophysical development and crises inherent in early adolescence. For a comparative analysis of knowledge of pupils as the fifth and sixth grades by training years (2013-2014, 2014-2015 the dependence of quality of knowledge from the problems of adolescence. The specifics of semantic informatics textbooks for 6th grade is taking into account the age and characteristics of pupils need reflected on the psychological and educational requirements. Presents the basic functions performed by the textbook as a teaching tool, particularly in informatics. Considered the requirements set by the modern informatics textbook T. P. Sokolowski. Analysis of current informatics textbooks for 6th grade on the example of studying the topic "Algorithms and their performers' and found some problems in their content. Considering completed research were summarized and singled the basic psychological and pedagogical requirements to be met by informatics textbooks for 6th grade. As the prospects for further research appears analysis electronic editions of informatics and refinement requirements for defined existing textbooks considering psychological characteristics of young adolescents.

  8. Reflections on the ecclesiastical interpretations of 6 th April 1652 as ...

    African Journals Online (AJOL)

    This article verifies the theological interpretation of the 6th April 1652 as a South African symbolic date, which marked the beginning of the European and Christian contribution to the history of Southern Africa. The exposition deals, in particular, with 1752, 1852 and 1952 interpretations by leading ministers of the Dutch ...

  9. Editorial 6th International Conference on Near-field Optics and Related Techniques

    NARCIS (Netherlands)

    van Hulst, N.F.

    2001-01-01

    This topical issue of the Journal of Microscopy contains all of the papers are based on work presented at NFO-6, the 6th International Conference on Near-field Optics and Related Techniques, held at the University of Twente, Enschede, the Netherlands, 27-31 August 2000.

  10. 6th International Conference on Innovations in Bio-Inspired Computing and Applications

    CERN Document Server

    Abraham, Ajith; Krömer, Pavel; Pant, Millie; Muda, Azah

    2016-01-01

    This Volume contains the papers presented during the 6th International Conference on Innovations in Bio-Inspired Computing and Applications IBICA 2015 which was held in Kochi, India during December 16-18, 2015. The 51 papers presented in this Volume were carefully reviewed and selected. The 6th International Conference IBICA 2015 has been organized to discuss the state-of-the-art as well as to address various issues in the growing research field of Bio-inspired Computing which is currently one of the most exciting research areas, and is continuously demonstrating exceptional strength in solving complex real life problems. The Volume will be a valuable reference to researchers, students and practitioners in the computational intelligence field.

  11. Flexibility development among 5–6th grade schoolchildren under the influence of cheerleading activity

    Directory of Open Access Journals (Sweden)

    Oleksandr Aghyppo

    2017-10-01

    Full Text Available Purpose: to determine the degree of change in the level of development of the flexibility of 5–6th grade schoolchildren under the influence of cheerleading activity. Material & Methods: 103 schoolchildren of 10–11 years took part in the research. Methods: theoretical analysis and generalization of scientific and methodological literature, pedagogical testing, pedagogical experiment and methods of mathematical statistics. Results: the indicators of the level of development of flexibility are presented, as well as the degree of their change under the influence of cheerleading activities among schoolchildren of the 5th and 6th grades of the general education school. Conclusion: the use of cheerleading activity positively influenced the degree of manifestation of the flexibility of schoolchildren of middle classes in all the parameters studied.

  12. 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning

    CERN Document Server

    Prieta, Fernando; Mascio, Tania; Gennari, Rosella; Rodríguez, Javier; Vittorini, Pierpaolo

    2016-01-01

    The 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning held in Seville (Spain) is host by the University of Seville from 1st to 3rd June, 2016. The 6th edition of this conference expands the topics of the evidence-based TEL workshops series in order to provide an open forum for discussing intelligent systems for TEL, their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone solutions or web-based ones. It intends to bring together researchers and developers from industry, the education field and the academic world to report on the latest scientific research, technical advances and methodologies.

  13. Controlling maternal feeding practices associated with decreased dieting behavior in 6th grade children

    Science.gov (United States)

    Rhee, Kyung E.; Appugliese, Danielle P.; Prisco, Alicia; Kaciroti, Niko A.; Corwyn, Robert F.; Bradley, Robert H.; Lumeng, Julie C.

    2010-01-01

    Controlling maternal feeding practices (CMFPs) have been linked to increased caloric intake, disinhibited eating, and obesity in children. Its relationship to child dieting behavior however is unknown. Using the National Institute of Child Health and Human Development Study of Early Child Care and Youth Development, this study examined whether controlling feeding practices are associated with increased or decreased dieting behavior in children. CMFP was assessed in 3rd grade by the question, “Do you let your child eat what he/she feels like eating?”. Answers ranged from 1–4; higher scores were reverse coded to indicate greater control. Child dieting behavior was assessed in 6 th grade and dichotomized into “any dieting behaviors” vs. “none”. Multiple logistic regression was used to investigate the relationship between CMFP and dieting behavior and included the covariates sex, race, maternal education, maternal weight status, child weight status in 3rd grade and change in BMI z-score between 3rd and 6th grade. In 6th grade (n=776), 41.5% of children engaged in dieting behavior. In the multivariate analysis, greater maternal control over child eating predicted lower odds of child dieting in 6th grade (OR = 0.79, 95% CI = 0.64–0.97). There was no interaction between CMFP and child sex or baseline obesity status. Exerting more control over what a child eats in 3rd grade may protect against future dieting behavior in children, independent of child weight status or rate of weight gain. Further work is needed to better define which controlling feeding practices are beneficial for the child. PMID:20338289

  14. 6th Annual Homeland Security and Defense Education Summit, Developing an Adaptive Homeland Security Environment

    OpenAIRE

    2013-01-01

    6th Annual Homeland Security and Defense Education Summit Developing an Adaptive Homeland Security Environment, Burlington, MA, September 26-28, 2013 2013 Summit Agenda Naval Postgraduate School Center for Homeland Defense and Security In Partnership With Northeastern University, Department of Homeland Security, Federal Emergency Management Agency, National Guard Homeland Security Institute, National Homeland Defense Foundation Naval Postgraduate School Center for Homeland Defense and S...

  15. 6th International Workshop on Application of Lasers in Atomic Nuclei Research

    CERN Document Server

    Błaszczak, Z; Marinova, K; LASER 2004

    2006-01-01

    6th International Workshop on Application of Lasers in Atomic Nuclei Research, LASER 2004, held in Poznan, Poland, 24-27 May, 2004 Researchers and graduate students interested in the Mössbauer Effect and its applications will find this volume indispensable. The volume presents the most recent developments in the methodology of Mössbauer spectroscopy. Reprinted from Hyperfine Interactions (HYPE) Volume 162, 1-4

  16. Quadrennial Review of Military Compensation (6th). Executive Summary. Volumes 1 thru 1C, and Volumes 2 thru 3

    Science.gov (United States)

    1988-08-01

    CIVILIAN EARNINGS PROFILE: ENLISTED SOURCE: SYLLOGISTICS 2-24 6th ORNC Esport -Volum 11 participation and higher than that of civilian counterparts in...7-26 6th QRNC esport - Volume I m Eliminate the existing 80 percent limiltation onmeai/entertairment deductions incurred in connection with the

  17. Introductory guide to floors and flooring

    CSIR Research Space (South Africa)

    Billingham, PA

    1977-01-01

    Full Text Available ............................................................................. In situ terrazzo 2 3 Natural stone ............................................................................... 25 . . Ceram~c t~les ................................................................................ 27 Brick floors... coverings) includes carpets, wooden floors and cork t~les. There is a third group (thin floor coverings) made from material which conducts heat poorly but which is usually applied too thinly (3 mm or less) for the insulating effect to have a great...

  18. IAEA International Database on Irradiated Nuclear Graphite Properties. 6th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2004-12-01

    This report summarizes the Consultant Meeting 6th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 September 2004 at Plas Tan-Y-Bwlch, Maentwrog, Gwynedd, UK. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  19. Improving 6th Grade Climate Literacy using New Media (CLINM) and Teacher Professional Development

    Science.gov (United States)

    Smith, G.; Schmidt, C.; Metzger, E. P.; Cordero, E. C.

    2012-12-01

    The NASA-funded project, Improving 6th Grade Climate Literacy using New Media (CLINM), is designed to improve the climate literacy of California's 450,000 6th-grade students through teacher professional development that presents climate change as an engaging context for teaching earth science standards. The project fosters experience-based interaction among learners and encourages expressive creativity and idea-exchange via the web and social media. The heart of the CLINM project is the development of an online educator-friendly experience that provides content expert-reviewed, teacher-tested, standards-based educational resources, classroom activities and lessons that make meaningful connections to NASA data and images as well as new media tools (videos, web, and phone applications) based on the Green Ninja, a climate-action superhero who fights global warming by inspiring personal action (www.greenninja.info). In this session, we will discuss this approach to professional development and share a collection of teacher-tested CLINM resources. CLINM resources are grounded in earth system science; classroom activities and lessons engage students in exploration of connections between natural systems and human systems with a particular focus on how climate change relates to everyone's need for food, water, and energy. CLINM uses a team-based approach to resource development, and partners faculty in San José State University's (SJSU) colleges of Science, Education, and Humanities and the Arts with 6th-grade teachers from local school districts, a scientist from NASA Ames Research Center and climate change education projects at Stanford University, the University of Nebraska at Lincoln, and the University of Idaho. Climate scientists and other content experts identify relevant concepts and work with science educators to develop and/or refine classroom activities to elucidate those concepts; activities are piloted in pre-service science methods courses at SJSU and in

  20. Papers presented at the 6th H-mode workshop (Seeon, Germany)

    International Nuclear Information System (INIS)

    1997-10-01

    The 6th H-mode workshop was held at Kloster Seeon (Germany) during the period of September 22-24, 1997. Contribution to this workshop is reported. Reports include. 1. Role of Nonuniform Superthermal Ions for Internal Transport Barriers. 2. Electric Field Bifurcation and Transition in the Core Plasma of CHS. 3. Formation and Termination of High Ion Temperature Mode in Heliotron/torsatron Plasmas. 4. Transition to an Enhanced Internal Transport Barrier. 5. Physics of Collapses - Probabilistic Occurrence of ELMs and Crashes -. (J.P.N.)

  1. Corrosion investigation for iron artifacts dug out at the 6th Yamato ancient tomb

    International Nuclear Information System (INIS)

    Yoshikawa, Hideki; Honda, Takashi; Gunji, Eiichi

    2005-09-01

    We analyzed corrosion depth for some iron artifacts dug out at the 6th Yamato ancient tomb in Nara prefecture using X-ray CT for the purpose of estimation for long stability of iron material in the ground as a part of the natural analog study related to the research of the high-level nuclear waste disposal. These samples are three big and 17 small iron artifacts which are called 'Tetsutei' like as horseshoe iron plate. It is considered that the most of them had been buried in a slightly oxidizing or reducing environment. The analysis result shows the maximum corrosion depth is 1.6 mm for about 1500 years. This paper presents an outline of this study. (author)

  2. 6th International Workshop on Computer-Aided Scheduling of Public Transport

    CERN Document Server

    Branco, Isabel; Paixão, José

    1995-01-01

    This proceedings volume consists of papers presented at the Sixth International Workshop on Computer-Aided Scheduling of Public Transpon, which was held at the Fund~lio Calouste Gulbenkian in Lisbon from July 6th to 9th, 1993. In the tradition of alternating Workshops between North America and Europe - Chicago (1975), Leeds (1980), Montreal (1983), Hamburg (1987) and again Montreal (1990), the European city of Lisbon was selected as the venue for the Workshop in 1993. As in earlier Workshops, the central theme dealt with vehicle and duty scheduling problems and the employment of operations-research-based software systems for operational planning in public transport. However, as was initiated in Hamburg in 1987, the scope of this Workshop was broadened to include topics in related fields. This fundamental alteration was an inevitable consequence of the growing demand over the last decade for solutions to the complete planning process in public transport through integrated systems. Therefore, the program of thi...

  3. THEME-BASED TEACHING IN 6TH CLASS ELEMENTARY SCHOOL STUDENTS TO IMPROVE LISTENING SKILL

    Directory of Open Access Journals (Sweden)

    Asri Aprianti

    2017-12-01

    Full Text Available This research was conducted to identify elementary school students‘ improvement and the impact of theme-based teaching. The study was conducted by using case study which involved students of 6 th grade in Primagama Sampangan as the sample. In addition, the data were gathered through listening assessment. The major finding was theme-based teaching more interested in learning English, especially spelling of certain words. The theme should suit the proficiency level of elementary school students and be relevant to their daily lives. A pre-test test should be administered to ascertain language level of the learners. There should be post-test to assess the effectiveness of the study. The mean of the post-test was 6.25. After the treatment did, the post-test result shown that the mean was 9.33. It could be concluded the research and some activities that can be used in improving students‘ listening skill.

  4. Dictionary of minor planet names addendum to 6th edition 2012-2014

    CERN Document Server

    Schmadel, Lutz D

    2015-01-01

    The quantity of numbered minor planets is now approaching half a million. Together with this Addendum, the sixth edition of the Dictionary of Minor Planet Names, which is the IAU's official reference for the field, now covers more than 19,000 named minor planets. In addition to being of practical value for identification purposes, the Dictionary of Minor Planet Names provides authoritative information about the basis for the rich and colorful variety of ingenious names, from heavenly goddesses to artists, from scientists to Nobel laureates, from historical or political figures to ordinary women and men, from mountains to buildings, as well as a variety of compound terms and curiosities. This Addendum to the 6th edition of the Dictionary of Minor Planet Names adds approximately 2200 entries. It also contains many corrections, revisions and updates to the entries published in earlier editions. This work is an abundant source of information for anyone interested in minor planets and who enjoys reading about the ...

  5. 6th European Conference of the International Federation for Medical and Biological Engineering

    CERN Document Server

    Vasic, Darko

    2015-01-01

    This volume presents the Proceedings of the 6th European Conference of the International Federation for Medical and Biological Engineering (MBEC2014), held in Dubrovnik September 7 – 11, 2014. The general theme of MBEC 2014 is "Towards new horizons in biomedical engineering" The scientific discussions in these conference proceedings include the following themes: - Biomedical Signal Processing - Biomedical Imaging and Image Processing - Biosensors and Bioinstrumentation - Bio-Micro/Nano Technologies - Biomaterials - Biomechanics, Robotics and Minimally Invasive Surgery - Cardiovascular, Respiratory and Endocrine Systems Engineering - Neural and Rehabilitation Engineering - Molecular, Cellular and Tissue Engineering - Bioinformatics and Computational Biology - Clinical Engineering and Health Technology Assessment - Health Informatics, E-Health and Telemedicine - Biomedical Engineering Education

  6. 6th International Conference on Practical Applications of Computational Biology & Bioinformatics

    CERN Document Server

    Luscombe, Nicholas; Fdez-Riverola, Florentino; Rodríguez, Juan; Practical Applications of Computational Biology & Bioinformatics

    2012-01-01

    The growth in the Bioinformatics and Computational Biology fields over the last few years has been remarkable.. The analysis of the datasets of Next Generation Sequencing needs new algorithms and approaches from fields such as Databases, Statistics, Data Mining, Machine Learning, Optimization, Computer Science and Artificial Intelligence. Also Systems Biology has also been emerging as an alternative to the reductionist view that dominated biological research in the last decades. This book presents the results of the  6th International Conference on Practical Applications of Computational Biology & Bioinformatics held at University of Salamanca, Spain, 28-30th March, 2012 which brought together interdisciplinary scientists that have a strong background in the biological and computational sciences.

  7. Chinese Emigrants in Russia at the 6th Congress of the Communist Party of China

    Directory of Open Access Journals (Sweden)

    Zhang Wei

    2015-12-01

    Full Text Available In the history of Chinese people staying on Russian territory there is still a lot of questions and areas for investigation and clarification. It is clear that the interaction between the Russians and the Chinese had a direct impact on the further development of Russian- Chinese relations. One of the unique event in the history of Russian-Chinese relations was the 6th Congress of the Communist Party of China, held in Moscow region in the Pervomayskoe village. It was the only Congress of the CPC held abroad and the Congress, where Marxism was adopted by the Chinese Communists, and later it was spread to China. In fact, the Congress was the starting point of the process of Marxism Sinification. The delegates of the 6th Congress included the Chinese immigrants who worked and studied in the USSR. They are directly influenced by the October Revolution which changed their way of thinking, these were people who perceived the ideas of Marxism-Leninism early, they organized the holding of this congress, where examined in detail the possible ways of the Chinese revolution. By adopting Marxism- Leninism and starting its propaganda, they have made a significant contribution to its spread in China in the form of Sinificated Marxism. The further destiny and life of overseas Chinese were different, but almost all of them were closely linked to the Chinese revolution and the transformation process in the Chinese society in the middle of the 20th century. The authors described in detail the composition of the participants and organizers of the Congress, analyzed the content of speeches and reports of the head of the Central Committee of the Communist Party of China at the congress, considered the further destiny of the participants and delegates.

  8. FOREWORD: 6th International Conference on Pumps and Fans with Compressors and Wind Turbines (ICPF2013)

    Science.gov (United States)

    Wu, Yulin; Wang, Zhengwei; Yuan, Shouqi; Shi, Weidong; Liu, Shuhong; Luo, Xingqi; Wang, Fujun

    2013-12-01

    The 6th International Conference on Pumps and Fans with Compressors and Wind Turbines (ICPF 2013) was held in Beijing, China, 19-22 September 2013, which was jointly organized by Tsinghua University and Jiangsu University. The co-organizers were Zhejiang University, Zhejiang Sci-Tech University, The State Key Laboratory of Hydroscience and Engineering, The State Key Laboratory of Automotive Safety and Energy and Beijing International Science and Technology Cooperation Base for CO2 Utilization and Reduction. The sponsor of the conference was Concepts NREC. The First International Conference on Pumps and Systems (May 1992), the Second International Conference on Pumps and Fans (October 1995), the Third International Conference on Pumps and Fans (October 1998), and the Fourth International Conference on Pumps and Fans (26-29 August 2002) were all held in Beijing and were organized by the late famous Chinese professor on fluid machinery and engineering, Professor Zuyan Mei of Tsinghua University. The conference was interrupted by the death of Professor Mei in 2003. In order to commemorate Professor Mei, the organizing committee of ICPF decided to continue organizing the conference series. The Fifth Conference on Pumps and Systems (2010 ICPF) took place in Hangzhou, Zhejiang Province, China, 18-21 October 2010, and it was jointly organized by Zhejiang University and Tsinghua University. With the development of renewable energy and new energy in China and in the world, some small types of compressor and some types of pump, as well as wind turbines are developing very fast; therefore the ICPF2013 conference included compressors and wind turbines. The theme of the conference was the application of renewable energy of pumps, compressors, fans and blowers. The content of the conference was the basic study, design and experimental study of compressors, fans, blowers and pumps; the CFD application on pumps and fans, their transient behavior, unsteady flows and multi-phase flow

  9. PREFACE: The 6th International Symposium on Measurement Techniques for Multiphase Flows

    Science.gov (United States)

    Okamoto, Koji; Murai, Yuichi

    2009-02-01

    Research on multi-phase flows is very important for industrial applications, including power stations, vehicles, engines, food processing, and so on. Also, from the environmental viewpoint, multi-phase flows need to be investigated to overcome global warming. Multi-phase flows originally have non-linear features because they are multi-phased. The interaction between the phases plays a very interesting role in the flows. The non-linear interaction causes the multi-phase flows to be very difficult to understand phenomena. The International Symposium on Measurement Techniques for Multi-phase Flows (ISMTMF) is a unique symposium. The target of the symposium is to exchange the state-of-the-art knowledge on the measurement techniques for non-linear multi-phase flows. Measurement technique is the key technology to understanding non-linear phenomena. The ISMTMF began in 1995 in Nanjing, China. The symposium has continuously been held every two or three years. The ISMTMF-2008 was held in Okinawa, Japan as the 6th symposium of ISMTMF on 15-17 December 2008. Okinawa has a long history as the Ryukyus Kingdom. China and Japan have had cultural and economic exchanges through Okinawa for more than 1000 years. Please enjoy Okinawa and experience its history to enhance our international communication. The present symposium was attended by 124 participants, the program included 107 contributions with 5 plenary lectures, 2 keynote lectures, and 100 oral regular paper presentations. The topics include, besides the ordinary measurement techniques for multiphase flows, acoustic and electric sensors, bubbles and microbubbles, computed tomography, gas-liquid interface, laser-imaging and PIV, oil/coal/drop and spray, solid and powder, spectral and multi-physics. This volume includes the presented papers at ISMTMF-2008. In addition to this volume, ten selected papers will be published in a special issue of Measurement Science and Technology. We would like to express special thanks to all

  10. 1/6TH SCALE STRIP EFFLUENT FEED TANK-MIXING RESULTS USING MCU SOLVENT

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, E

    2006-02-01

    The purpose of this task was to determine if mixing was an issue for the entrainment and dispersion of the Modular Caustic Side Solvent Extraction (CSSX) Unit (MCU) solvent in the Defense Waste Processing Facility (DWPF) Strip Effluent Feed Tank (SEFT). The MCU strip effluent stream containing the Cs removed during salt processing will be transferred to the DWPF for immobilization in HLW glass. In lab-scale DWPF chemical process cell testing, mixing of the solvent in the dilute nitric acid solution proved problematic, and the Savannah River National Laboratory (SRNL) was requested to perform scaled SEFT mixing tests to evaluate whether the problem was symptomatic of the lab-scale set-up or of the solvent. The solvent levels tested were 228 and 235 ppm, which represented levels near the estimated DWPF solvent limit of 239 ppm in 0.001M HNO{sub 3} solution. The 239 ppm limit was calculated by Norato in X-CLC-S-00141. The general approach for the mixing investigation was to: (1) Investigate the use of fluorescent dyes to aid in observing the mixing behavior. Evaluate and compare the physical properties of the fluorescent dyed MCU solvents to the baseline Oak Ridge CSSX solvent. Based on the data, use the dyed MCU solvent that best approximates the physical properties. (2) Use approximately a 1/6th linear scale of the SEFT to replicate the internal configuration for DWPF mixing. (3) Determine agitator speed(s) for scaled testing based on the DWPF SEFT mixing speed. (4) Perform mixing tests using the 1/6th SEFT and determine any mixing issues (entrainment/dispersion, accumulation, adhesion) through visual observations and by pulling samples to assess uniformity. The mixing tests used MCU solvent fabricated at SRNL blended with Risk Reactor DFSB-K43 fluorescent dye. This dyed SRNL MCU solvent had equivalent physical properties important to mixing as compared to the Oak Ridge baseline solvent, blended easily with the MCU solvent, and provided an excellent visual aid.

  11. PREFACE: 6th International Workshop on Multi-Rate Processes and Hysteresis (MURPHYS2012)

    Science.gov (United States)

    Dimian, Mihai; Rachinskii, Dmitrii

    2015-02-01

    The International Workshop on Multi-Rate Processes and Hysteresis (MURPHYS) conference series focuses on multiple scale systems, singular perturbation problems, phase transitions and hysteresis phenomena occurring in physical, biological, chemical, economical, engineering and information systems. The 6th edition was hosted by Stefan cel Mare University in the city of Suceava located in the beautiful multicultural land of Bukovina, Romania, from May 21 to 24, 2012. This continued the series of biennial multidisciplinary conferences organized in Cork, Ireland from 2002 to 2008 and in Pécs, Hungary in 2010. The MURPHYS 2012 Workshop brought together more than 50 researchers in hysteresis and multi-scale phenomena from the United State of America, the United Kingdom, France, Germany, Italy, Ireland, Czech Republic, Hungary, Greece, Ukraine, and Romania. Participants shared and discussed new developments of analytical techniques and numerical methods along with a variety of their applications in various areas, including material sciences, electrical and electronics engineering, mechanical engineering and civil structures, biological and eco-systems, economics and finance. The Workshop was sponsored by the European Social Fund through Sectoral Operational Program Human Resources 2007-2013 (PRO-DOCT) and Stefan cel Mare University, Suceava. The Organizing Committee was co-chaired by Mihai Dimian from Stefan cel Mare University, Suceava (Romania), Amalia Ivanyi from the University of Pecs (Hungary), and Dmitrii Rachinskii from the University College Cork (Ireland). All papers published in this volume of Journal of Physics: Conference Series have been peer reviewed through processes administered by the Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing. The Guest Editors wish to place on record their sincere gratitude to Miss Sarah Toms for the assistance she provided

  12. Supporting shop floor intelligence

    DEFF Research Database (Denmark)

    Carstensen, Peter; Schmidt, Kjeld; Wiil, Uffe Kock

    1999-01-01

    Many manufacturing enterprises are now trying to introduce various forms of flexible work organizations on the shop floor. However, existing computer-based production planning and control systems pose severe obstacles for autonomous working groups and other kinds of shop floor control to become......-to-day production planning by supporting intelligent and responsible workers in their situated coordination activities on the shop floor....

  13. 6th International Conference on the Physics Opportunities at an ElecTron-Ion Collider

    CERN Document Server

    Sabatié, F; POETIC6

    2015-01-01

    POETIC6, the 6th edition of the International Conference on the "Physics Opportunities at an ElecTron-Ion Collider", will take place at Ecole Polytechnique in Palaiseau, France from Monday, September 7th to Friday, September 11th 2015, a few weeks before the National Science Advisory Committee recommends a new Long Range Plan to the United States' DOE and NSF. In the midst of this much-anticipated report, and following earlier workshops at Stellenbosch, Bloomington, Valparaiso, Jyvaskyla and Yale, it is timely for the POETIC series to become an international conference. The primary goal will remain to continue the advancement of the field of electron-ion collider physics. While the central theme of the conference will be the physics of a future electron-ion collider, the workshop will also cover strongly-related physics in the CEBAF, RHIC, and LHC experimental programs. The conference will aim primarily at developments on the theory/phenomenology side, but the latest accelerator and experimental developments ...

  14. Proceedings of the 6th US/German Workshop on Salt Repository Research, Design, and Operation

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Francis D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steininger, Walter [Karlsruhe Inst. of Technology (KIT) (Germany); Bollingerfehr, Wilhelm [DBE Technology GmbH, Peine (Germany)

    2016-01-11

    The 6th US/German Workshop on Salt Repository Research, Design, and Operation was held in Dresden. Germany on September 7-9, 2015. Over seventy participants helped advance the technical basis for salt disposal of radioactive waste. The number of collaborative efforts continues to grow and to produce useful documentation, as well as to define the state of the art for research areas. These Proceedings are divided into Chapters, and a list of authors is included in the Acknowledgement Section. Also in this document are the Technical Agenda, List of Participants, Biographical Information, Abstracts, and Presentations. Proceedings of all workshops and other pertinent information are posted on websites hosted by Sandia National Laboratories and the Nuclear Energy Agency Salt Club. The US/German workshops provide continuity for long-term research, summarize and publish status of mature areas, and develop appropriate research by consensus in a workshop environment. As before, major areas and findings are highlighted, which constitute topical Chapters in these Proceedings. In total, the scientific breadth is substantial and while not all subject matter is elaborated into chapter format, all presentations and abstracts are published in this document. In the following Proceedings, six selected topics are developed in detail.

  15. Summary of the 6th Annual Bladder Cancer Think Tank: new directions in urologic research.

    Science.gov (United States)

    Svatek, Robert S; Rosenberg, Jonathan E; Galsky, Matthew D; Lee, Cheryl T; Latini, David M; Bochner, Bernard H; Weizer, Alon Z; Apolo, Andrea B; Sridhar, Srikala S; Kamat, Ashish M; Hansel, Donna; Flaig, Thomas W; Smith, Norm D; Lotan, Yair

    2013-10-01

    The 6th Annual Bladder Cancer Think Tank brought together a multidisciplinary group of clinicians, researchers, and representatives from the National Cancer Institute and Industry in an effort to advance bladder cancer research efforts. This year's meeting comprised panel discussions and research involving 5 separate working groups, including the Survivorship, Clinical Trials, Standardization of Care, Data Mining, and Translational Science working groups. In this manuscript, the accomplishments and objectives of the working groups are summarized. Notable efforts include: (1) the development of a survivorship care plan for early and late-stage bladder cancer; (2) the development of consensus criteria for eligibility and endpoints for bladder cancer clinical trials; (3) an improved understanding of current practice patterns regarding the use of perioperative chemotherapy in an effort to standardize care; (4) creation of a comprehensive handbook to assist researchers with developing bladder cancer databases; and (5) identification of response to therapy of high-grade non muscle invasive disease through a collaborative exchange of expertise and resources. Copyright © 2013 Elsevier Inc. All rights reserved.

  16. 6th International Accounting Congress of Barcelona (1929 organised by the Association of Accountants of Catalonia

    Directory of Open Access Journals (Sweden)

    Josepa Alemany

    2017-01-01

    Full Text Available Purpose: the work presented is a descriptive, contextual and detailed analysis of the activity, and the conclusions developed in the first international accounting conference held in Barcelona. The 6th International Conference on Accounting which took place in Barcelona coinciding with the International Exhibition of 1929, was organised by the Association Internationale de Comptabilité of Brussels. This association proposed holding regular meetings to discuss and study technical accounting and economic issues related to that time. Approach: the originality of the work lies in being an analytical description of the original documents prepared by the Association of Accountants of Catalonia about the conference. Findings/Originality: this study allows redoing assumptions made in previous works, because the documents before this work were contradictory regarding dates, facts and some of the content covered. Limitations: the biggest limitation of the work comes from the lack of written documentation existing on this conference. Value: the present study continues the research on topics of history of accounting in Catalonia. It is expected to complement this work by a deeper analysis of the contents and the topics covered in the papers presented at the conference, and by linking them with the theoretical accounting lines existing at that time.

  17. Synopsis of the 6th Walker's Cay Colloquium on Cancer Vaccines and Immunotherapy

    Directory of Open Access Journals (Sweden)

    Marincola Francesco M

    2004-06-01

    Full Text Available Abstract The 6th annual Cancer Vaccines and Immunotherapy Colloquium at Walker's Cay was held under the auspices of the Albert B. Sabin Vaccine Institute on March 10–13, 2004. The Colloquium consisted of a select group of 34 scientists representing academia, biotechnology and pharmaceutical industry. The main goal of this gathering was to promote in a peaceful and comfortable environment exchanges between basic and clinical science. The secondary benefit was to inspire novel bench to bedside ventures and at the same time provide feed back about promising and/or disappointing clinical results that could help re-frame some scientific question or guide the design of future trials. Several topics were covered that included tumor antigen discovery and validation, platforms for vaccine development, tolerance, immune suppression and tumor escape mechanisms, adoptive T cell therapy and dendritic cell-based therapies, clinical trials and assessment of response. Here we report salient points raised by speakers or by the audience during animated discussion that followed each individual presentation.

  18. A Qualitative Study on 6th Grade Science and Technology Curriculum

    Directory of Open Access Journals (Sweden)

    Yeliz Temli

    2011-11-01

    Full Text Available The rapid development in technology, the effect of globalization and economical competition between countries make educational innovations necessary. In order to harmonize new generation with scientific and technological challenges, the science and technology curriculum plays crucial role. The aim of the study is to analyze new 6th grade science and technology curriculum so as to determine its main characteristics and the main differences between formal curriculum and experienced curriculum is based on analysis of formal curriculum, interviews with science and technology teachers and one observation. In this study, the researcher addresses Posner’s (1995 curriculum analysis questions through using the documents provided, and interviews with four science and technology teachers who teach in four different cities. Additionally, one observation is conducted in a class to observe the implementation of the new curriculum in real learning environment and observe the infrastructure of school. Findings show that participant teachers are satisfied with characteristics of constructivist approach in new science and technology curriculum, whereas it is stated that they have difficulty in the implementation phase. The participants mention not only inadequate lab equipment, but also difficulty in schedule of laboratories. It is also believed that participants elicit sufficient theoretical information during their pre-service education; however, they criticize the inadequate practice sessions. It is also believed that crowded classrooms are obstacles to implement a new curriculum.

  19. Highlights for the 6th International Ion Channel Conference: ion channel structure, function, disease and therapeutics

    Directory of Open Access Journals (Sweden)

    Limei Wang

    2017-11-01

    Full Text Available To foster communication and interactions amongst international scholars and scientists in the field of ion channel research, the 6th International Ion Channel Conference (IICC-2017 was held between June 23–27, 2017 in the eastern coastal city of Qingdao, China. The meeting consisted of 450 attendees and 130 speakers and poster presenters. The program consisted of research progress, new findings and ongoing studies that were focused on (1 Ion channel structure and function; (2 Ion channel physiology and human diseases; (3 Ion channels as targets for drug discovery; (4 Technological advances in ion channel research. An insightful overview was presented on the structure and function of the mechanotransduction channel Drosophila NOMPC (No mechanoreceptor potential C, a member of the transient receptor potential (TRP channel family. Recent studies on Transmembrane protein 16 or Anoctamin-1 (TMEM16A, a member of the calcium-activated chloride channel [CaCC] family were summarized as well. In addition, topics for ion channel regulation, homeostatic feedback and brain disorders were thoroughly discussed. The presentations at the IICC-2017 offer new insights into our understanding of ion channel structures and functions, and ion channels as targets for drug discovery.

  20. 6th Conference on Coal Utilization Technology; Dai 6 kai sekitan riyo gijutsu kaigi koenshu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The paper compiled the papers presented in the 6th Conference on Coal Utilization Technology held in September 1996. With relation to the fluidized bed boiler, reported were Field operation test of Wakamatsu PFBC combined cycle power plant and Development of pressurized internally circulating fluidized bed combustion technology. Regarding the coal reformation, Development of advanced coal cleaning process, Coal preparation and coal cleaning in the dry process, etc. Concerning the combustion technology, Study of the O2/CO2 combustion technology, Development of pressurized coal partial combustor, etc. About the CWM, Development of low rank coals upgrading and their CWM producing technology, Technique of CWM distribution system, etc. Relating to the coal ash, Engineering characteristics of the improved soil by deep mixing method using coal ash, Employment of fluidized bed ash as a basecourse material, On-site verification trials using fly ash for reclamation behind bulkheads, Water permeabilities of pulverized fuel ash, Separation of unburned carbon from coal fly ash through froth flotation, Practical use technology of coal ash (POZ-O-TEC), etc

  1. The 6th questionnaire report of safety control in nuclear medicine

    International Nuclear Information System (INIS)

    2002-01-01

    The questionnaire has been done every three years from 1986 for the ultimate purpose of safe medical examinations and this 6th one was performed for the objective period of April 1, 1998-March 31, 2001. Subjects were 1,254 nuclear medicine facilities and answers were obtained in 86.2%. Questionnaire concerned the personnel involved in nuclear medical examinations (medical doctors and pharmacists as well as radiology technologists), instruments (an investigation was additionally conducted on Anger-type camera), accidents experienced, matters possibly leading to accident, improvement in safety control, serious trouble and breakage of the instrument, requests for the instrument manufacturers and so on. Summaries were: numbers of medical radiology technologist increased and a considerable and small number of doctors and pharmacists, respectively, were found involved; tests in vitro were decreased; SPECT-camera with 2 or 3 detectors increased; check rate for imaging instruments was about 80%; cases of actual and possible accident increased but not serious; improvements for automatic operation and of safety sensor were required; mind for preventing accident was important; many requests for the manufacturers were proposed. (K.H.)

  2. In vitro Comparative Evaluation of Tensile Bond Strength of 6(th), 7(th) and 8(th) Generation Dentin Bonding Agents.

    Science.gov (United States)

    Kamble, Suresh S; Kandasamy, Baburajan; Thillaigovindan, Ranjani; Goyal, Nitin Kumar; Talukdar, Pratim; Seal, Mukut

    2015-05-01

    Newer dentin bonding agents were developed to improve the quality of composite restoration and to reduce time consumption in its application. The aim of the present study was to evaluate tensile bond strength of 6(th), 7(th) and 8(th) generation bonding agents by in vitro method. Selected 60 permanent teeth were assigned into 20 in each group (Group I: 6(th) generation bonding agent-Adper SE plus 3M ESPE, Group II: 7(th) generation bonding agent-G-Bond GC Corp Japan and Group III: 8(th) generation dentin adhesives-FuturaBond, DC, Voco, Germany). With high-speed diamond disc, coronal dentin was exposed, and selected dentin bonding agents were applied, followed by composite restoration. All samples were saved in saline for 24 h and tensile bond strength testing was done using a universal testing machine. The obtained data were tabulated and statistically analyzed using ANOVA test. The tensile bond strength readings for 6(th) generation bonding agent was 32.2465, for 7(th) generation was 31.6734, and for 8(th)-generation dentine bonding agent was 34.74431. The highest tensile bond strength was seen in 8(th) generation bonding agent compared to 6(th) and 7(th) generation bonding agents. From the present study it can be conclude that 8(th) generation dentine adhesive (Futura DC, Voco, Germany) resulted in highest tensile bond strength compared to 6(th) (Adper SE plus, 3M ESPE) and 7(th) generation (G-Bond) dentin bonding agents.

  3. PREFACE: 6th International Workshop on Pseudo-Hermitian Hamiltonians in Quantum Physics

    Science.gov (United States)

    Fring, Andreas; Jones, Hugh; Znojil, Miloslav

    2008-06-01

    Attempts to understand the quantum mechanics of non-Hermitian Hamiltonian systems can be traced back to the early days, one example being Heisenberg's endeavour to formulate a consistent model involving an indefinite metric. Over the years non-Hermitian Hamiltonians whose spectra were believed to be real have appeared from time to time in the literature, for instance in the study of strong interactions at high energies via Regge models, in condensed matter physics in the context of the XXZ-spin chain, in interacting boson models in nuclear physics, in integrable quantum field theories as Toda field theories with complex coupling constants, and also very recently in a field theoretical scenario in the quantization procedure of strings on an AdS5 x S5 background. Concrete experimental realizations of these types of systems in the form of optical lattices have been proposed in 2007. In the area of mathematical physics similar non-systematic results appeared sporadically over the years. However, intensive and more systematic investigation of these types of non- Hermitian Hamiltonians with real eigenvalue spectra only began about ten years ago, when the surprising discovery was made that a large class of one-particle systems perturbed by a simple non-Hermitian potential term possesses a real energy spectrum. Since then regular international workshops devoted to this theme have taken place. This special issue is centred around the 6th International Workshop on Pseudo-Hermitian Hamiltonians in Quantum Physics held in July 2007 at City University London. All the contributions contain significant new results or alternatively provide a survey of the state of the art of the subject or a critical assessment of the present understanding of the topic and a discussion of open problems. Original contributions from non-participants were also invited. Meanwhile many interesting results have been obtained and consensus has been reached on various central conceptual issues in the

  4. 6th conference on Advances in Optoelectronics and Micro/nano-optics

    International Nuclear Information System (INIS)

    2017-01-01

    The 6th Conference on Advances in Optoelectronics and Micro/nano-optics (AOM 2017) Nanjing, China April 23 - 26, 2017 Conference Co-Chairs: Yiping Cui - Southeast University, China Xiaocong Yuan - Shenzhen University, China Shining Zhu - Nanjing University, China WELCOME Journal of physics: Conference Series is publishing a volume of conference proceedings that contains a selection of papers presented at the 6 th Conference on Advances in Optoelectronics and Micro/nano-optics (AOM 2017), which is an OSA topical meeting that started in 2009. AOM 2017, organized by The Optical Society of America, Southeast University, and Jiangsu Optical Society, was successfully held at Nanjing, China from April 23 th -26 th , 2017. It aims to bring together leading academic scientists, researchers and scholars to exchange and share their experience and research results on all aspects of optoelectronics and micro/nano-optics, and to discuss the practical challenges encountered and the solutions adopted. Located in Yangtze River Delta area and the center of east China, Nanjing is the capital of Jiangsu province and the second largest city in the east China region, turned out to be an ideal meeting place for domestic and overseas participants of this international conference. The conference program included plenary talks, invited talks, oral and poster contributions. From numerous submissions, 64 of the most promising and IOP-relevant contributions were included in this volume. The submissions present original ideas or results of general significance, supported by clear reasoning, compelling evidence relevant to the research. The authors state clearly the problems and the significance of their research to theory and practice. Being a successful conference, this event gathered more than 300 qualified and high-level researchers and experts, which created a good platform for worldwide researchers and engineers to enjoy the academic communication. Taking advantage of this opportunity, we

  5. Probiotic Amelioration of Azotemia in 5/6th Nephrectomized Sprague-Dawley Rats

    Directory of Open Access Journals (Sweden)

    Natarajan Ranganathan

    2005-01-01

    Full Text Available The present study was to test the hypothesis that selected bacteria instilled into the gastrointestinal tract could help in converting nitrogenous wastes accumulated due to renal insufficiency into nontoxic compounds; thereby, ameliorating the biochemical imbalance. Herein we describe a prospective, blinded, placebo-controlled pilot study, using 5/6th nephrectomized Sprague Dawley rat as a chronic renal failure model. The study group consisted of 36 nephrectomized and 7 non-nephrectomized (control rats. After two-week nephrectomy stabilization, cohorts of six nephrectomized rats were fed casein-based diet plus one of the following regimens: (A Control, (B Placebo (casein-based diet without probiotics, (C Bacillus pasteurii, (D Sporolac®, (E Kibow cocktail, (F CHR Hansen Cocktail, and (G ECONORMTM. Subsequently, blood (retro-orbital and urine (collected for measurements of blood urea-nitrogen and creatinine respectively, body weight and bacterial counts (feces were obtained at regular intervals. The study end-points were to determine if any of the probiotic dietary supplements facilitated, (1 decreased blood concentrations of uremic toxins, (2 altered renal function, and (3 prolonged survival. After 16 weeks of treatment, regimens C and D significantly prolonged the life span of uremic rats, in addition to showing a reduction in blood urea-nitrogen levels, concluding that supplementation of probiotic formulation to uremic rats slows the progression of azotemia, which may correlate with prolonged life span of uremic rats. Derivative trials of probiotic treatment of larger animals and humans will further assess the potential role of probiotic formulations in delaying the onset and clinical severity of clinical illness at different stages of renal failure.

  6. Gender Representations in the Illustrations of the 6th Grade Language Textbook Used in Greek Elementary School

    Science.gov (United States)

    Karintzaidis, Nikolaos; Christodoulou, Anastasia; Kyridis, Argyris; Vamvakidou, Ifigeneia

    2016-01-01

    This study explores the way in which the two sexes are presented in education and particularly in the illustration of the language textbook used in the 6th Grade of Greek elementary school. In a society where gender equality is constitutionally enshrined and displayed as an educational policy objective, it attempts to examine if school textbook…

  7. An Early Warning System: Predicting 10th Grade FCAT Success from 6th Grade FCAT Performance. Research Brief. Volume 0711

    Science.gov (United States)

    Froman, Terry; Brown, Shelly; Lapadula, Maria

    2008-01-01

    This Research Brief presents a method for predicting 10th grade Florida Comprehensive Assessment Test (FCAT) success from 6th grade FCAT performance. A simple equation provides the most probable single score prediction, and give-or-take error margins define high and low probability zones for expected 10th grade scores. In addition, a double-entry…

  8. Tibetan/English Code-Switching Practices in the Tibetan Diaspora Classrooms: Perceptions of Select 6th Grade Teachers

    Science.gov (United States)

    Phuntsog, Nawang

    2018-01-01

    The role of the mother tongue-based schooling of Tibetan children has been debated passionately in the Tibetan Diaspora since 1985. Dharamsala, India, the seat of the Tibetan Diaspora, is the research site. Tibetan children are instructed in all school subjects in the Tibetan language up until 6th grade at which time the language of instruction is…

  9. Assessment of 6th Grade Elementary School Students, Their Parents' and Branch Teachers' Perspective on Physical Education Classes

    Science.gov (United States)

    Boyraz, Sirin; Ozbar, Nurper; Yetgin, Meral Kucuk; Koksalan, Burke

    2015-01-01

    A total of 437 volunteers including 54 teachers, 218 6th grade students and 102 parents from Beykoz Elementary Schools participated in this study to understand the perspectives of students, families and teachers on Physical Education classes. The perspectives of students, families and teachers of other branches are identified by survey method.…

  10. The 6th Grade Primary History Book and the Reactions of the Greek and Cypriot Educational Communities and Societies

    Science.gov (United States)

    Kimitris, Petros N.

    2017-01-01

    The present study was designed to explore the role of Rebousi et al's primary 6th grade history school book in evaluating the experience of a nation but also to examine the causes behind the reactions of political parties, historians and the wider public. History books and politics have very deep roots that reflect on old responsibilities,…

  11. Strategy-focused writing instruction: just observing and reflecting on a model benefits 6th grade students

    NARCIS (Netherlands)

    Fidalgo, R.; Torrance, M.; Rijlaarsdam, G.; van den Bergh, H.; Álvarez, M.L.

    2015-01-01

    Three groups of typically-developing 6th grade students (total N = 62) each completed strategy-focused writing training. Using a combined lagged-group and cross-panel design we assessed the effectiveness of a sequence of four different instructional components: observation and group reflection on a

  12. Story Telling: Research and Action to Improve 6th Grade Students' Views about Certain Aspects of Nature of Science

    Science.gov (United States)

    Kahraman, Feray; Karatas, Faik Özgür

    2015-01-01

    This study is a four-week section of ongoing attempts that aim to improve 6th grade students' understandings of the nature of science. The study was carried out in a sixth grade science and technology class at a rural middle school with 15 students on the basis of action research methodology. During the study, four different stories based on the…

  13. Proceedings of the 6th international workshop on top-quark physics. TOP 2013

    International Nuclear Information System (INIS)

    Husemann, Ulrich; Mildner, Hannes; Roscher, Frank

    2014-09-01

    The 6th International Workshop on Top-Quark Physics (TOP 2013) took place in Durbach, Germany, between September 14-19, 2013. Physicists from all over the world reported on the latest theoretical and experimental results on the physics of the top quark and discussed perspectives for the research field. While the weather in Durbach didn't always keep the promise, the scientific program certainly did: the 125 participants followed 50 plenary presentations in 15 topical sessions, complemented by a poster session in picturesque Staufenberg castle, in which 20 young scientist discussed their work over tarte flambee and and a glass of wine in front of their posters. All participants could vote for the best poster and the three best posters received prizes. In two question-and-answer sessions young physicists had the opportunity to meet world experts on top-quark physics in an informal atmosphere. The excursion brought the participants to the city of Strasbourg, France, with a boat trip on the Ill river and strolls through Strasbourg's beautiful old town. The TOP 2013 conference was co-organized by Karlsruhe Institute of Technology (KIT), DESY, and the University of Hamburg. We gratefully acknowledge the financial support the conference received from the DFG, the Helmholtz Alliance ''Physics at the Terascale'', the KIT Center Elementary Particle and Astroparticle Physics and from Blue Yonder. The conference would not have been possible without many helpers. First and foremost, we would like to thank our conference secretary, Mrs. Baerbel Braeunling. We would also like to thank the technical support team for the sessions (Martin Goerner, Steffen Roecker, Frank Roscher, Eike Schlieckau, Markus Seidel, Shawn Williamson), and the staff at Hotel Vier Jahreszeiten. We also thank Britta Liebaug for the design of the poster and the web page and Kirsten Sachs for her support in publishing these proceedings. Last but not least, the German top physics

  14. Storm Peak Laboratory 5th-6th Grade Climate and Weather Program

    Science.gov (United States)

    McCubbin, I. B.; Hallar, A. G.

    2008-12-01

    science. At the end of the day each student has a data sheet with measurements recorded from 5 locations of different elevations to take back to the classroom. Following the field trip, SPL scientists and educators visit the school for a follow-up to help children grasp concepts, represent their data set collected in graphical formats, answer questions, and evaluate students" learning. Currently, approximately 250 students annually participate in the SPL 5th and 6th grade climate education program.

  15. Establishment of floor ownership

    OpenAIRE

    Robič, Gregor

    2016-01-01

    After the socioeconomic system had been changed in 1991 the right of ownership and land registry seemed to gain a much greater importance. In that time the concept of floor ownership has also started to develop, but after 25 years a significant number of multi-unit buildings without the established floor ownership still exist in Slovenia. In this thesis both theoretical background and practical solutions for establishing a floor ownership are presented, furthermore, possible causes for an ina...

  16. Supporting shop floor intelligence

    DEFF Research Database (Denmark)

    Carstensen, Peter; Schmidt, Kjeld; Wiil, Uffe Kock

    1999-01-01

    Many manufacturing enterprises are now trying to introduce various forms of flexible work organizations on the shop floor. However, existing computer-based production planning and control systems pose severe obstacles for autonomous working groups and other kinds of shop floor control to become r......-to-day production planning by supporting intelligent and responsible workers in their situated coordination activities on the shop floor....

  17. Standards of specialized diabetes care. Edited by Dedov II, Shestakova MV (6th edition

    Directory of Open Access Journals (Sweden)

    Ivan Ivanovich Dedov

    2013-06-01

    Full Text Available Dear Colleagues!We are glad to present the 6th Edition of Standards of Diabetes Care. These evidence-based guidelines were designed to standardize and facilitate diabetes care in all regions of the Russian Federation. The Standards are updated on the regular basis to incorporate new data and relevant recommendations from national and international clinical societies, including World Health Organization Guidelines (WHO, 2011, International Diabetes Federation (IDF, 2011, American Diabetes Association (ADA, 2013, American Association of Clinical Endocrinologists (AACE, 2009, International Society for Pediatric and Adolescent Diabetes (ISPAD, 2009 and Russian Association of Endocrinologists (RAE, 2011, 2012. Current edition of the “Standards” also integrates results of completed randomized clinical trials (ADVANCE, ACCORD, VADT, UKPDS, etc., as well as findings from the national studies of diabetes mellitus (DM, conducted in close partnership with a number of Russian hospitals.Latest data indicates that prevalence of DM increased during the last decade more than two-fold, reaching some 371 million patients by 2013. According to the current estimation by the International Diabetes Federation, every tenth inhabitant of the planet will be suffering from DM by 2030. These observations resulted in the UN Resolution 61/225 passed on 20.12.2006 that encouraged all Member States “to develop national policies for the prevention, treatment and care of diabetes”.Like many other countries, Russian Federation experiences a sharp rise in the prevalence of DM. According to Russian State Diabetes Register, there are at least 3.799 million patients with DM in this country. However, the epidemiological survey conducted by the Federal Endocrinology Research Centre during 2002-2010 suggests that actual prevalence is 3 to 4 times greater than the officially recognized and, by this estimate, amounts to 9-10 million persons, comprising 7% of the

  18. PREFACE: 6th Vacuum and Surface Sciences Conference of Asia and Australia (VASSCAA-6)

    Science.gov (United States)

    Ahsan Bhatti, Javaid; Hussain, Talib; Khan, Wakil

    2013-06-01

    The Vacuum and Surface Sciences Conference of Asia and Australia (VASSCAA) conference series has been organized to create a new forum in Asia and Australia to discuss vacuum, surface and related sciences, techniques and applications. The conference series is officially endorsed by the International Union for Vacuum Science, Technique and Application (IUVSTA). The International Steering Committee of VASSCAA is comprised of Vacuum Societies in seven countries: Australia, China, India, Iran, Japan, South Korea and Pakistan. VASSCAA-1 was organized by the Vacuum Society of Japan in 1999 in Tokyo, Japan. VASSCAA-2 was held in 2002 in Hong Kong, VASSCAA-3 in Singapore in 2005. VASSCAA-4 was held in Matsue, Japan in 2008 and VASSCAA-5 in 2010 in Beijing, China. The 6th Vacuum and Surface Sciences Conference of Asia and Australia (VASSCAA-6) was held from 9-13 October 2012 in the beautiful city of Islamabad, Pakistan. The venue of the conference was the Pak-China Friendship Centre, Islamabad. More than six hundred local delgates and around seventy delegates from different countries participated in this mega event. These delegates included scientists, researchers, engineers, professors, plant operators, designers, vendors, industrialists, businessmen and students from various research organizations, technical institutions, universities, industries and companies from Pakistan and abroad. The focal point of the event was to enhance cooperation between Pakistan and the international community in the fields of vacuum, surface science and other applied technologies. At VASSCAA-6 85 oral presentations were delivered by local and foreign speakers. These were divided into different sessions according to their fields. A poster session was organized at which over 70 researchers and students displayed their posters. The best three posters won prizes. In parallel to the main conference sessions four technical short courses were held. The participants showed keen interest in all these

  19. The 6th International Conference on Computer Science and Computational Mathematics (ICCSCM 2017)

    Science.gov (United States)

    2017-09-01

    The ICCSCM 2017 (The 6th International Conference on Computer Science and Computational Mathematics) has aimed to provide a platform to discuss computer science and mathematics related issues including Algebraic Geometry, Algebraic Topology, Approximation Theory, Calculus of Variations, Category Theory; Homological Algebra, Coding Theory, Combinatorics, Control Theory, Cryptology, Geometry, Difference and Functional Equations, Discrete Mathematics, Dynamical Systems and Ergodic Theory, Field Theory and Polynomials, Fluid Mechanics and Solid Mechanics, Fourier Analysis, Functional Analysis, Functions of a Complex Variable, Fuzzy Mathematics, Game Theory, General Algebraic Systems, Graph Theory, Group Theory and Generalizations, Image Processing, Signal Processing and Tomography, Information Fusion, Integral Equations, Lattices, Algebraic Structures, Linear and Multilinear Algebra; Matrix Theory, Mathematical Biology and Other Natural Sciences, Mathematical Economics and Financial Mathematics, Mathematical Physics, Measure Theory and Integration, Neutrosophic Mathematics, Number Theory, Numerical Analysis, Operations Research, Optimization, Operator Theory, Ordinary and Partial Differential Equations, Potential Theory, Real Functions, Rings and Algebras, Statistical Mechanics, Structure Of Matter, Topological Groups, Wavelets and Wavelet Transforms, 3G/4G Network Evolutions, Ad-Hoc, Mobile, Wireless Networks and Mobile Computing, Agent Computing & Multi-Agents Systems, All topics related Image/Signal Processing, Any topics related Computer Networks, Any topics related ISO SC-27 and SC- 17 standards, Any topics related PKI(Public Key Intrastructures), Artifial Intelligences(A.I.) & Pattern/Image Recognitions, Authentication/Authorization Issues, Biometric authentication and algorithms, CDMA/GSM Communication Protocols, Combinatorics, Graph Theory, and Analysis of Algorithms, Cryptography and Foundation of Computer Security, Data Base(D.B.) Management & Information

  20. Pelvic Floor Dysfunction

    Science.gov (United States)

    ... intake. Biofeedback, which is a special form of pelvic floor physical therapy aimed at improving a patient’s rectal sensation and ... therapy. As patients perform this specialized form of pelvic floor physical therapy, they are often able to view EMG or ...

  1. Solving decontaminable flooring problems

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Pennsylvania Power and Light wanted to cover deteriorating concrete in unit 2 of its Susquehanna BWR with a smooth, durable, decontaminable coating. Traditionally, floors in the plant had been coated with epoxy paint, but many of these floors suffered delamination, and failed in three to five years. Painting with epoxy would also interrupt operations for as much as three days while the floor dried, yet critical instruments in some areas had to be monitored at least once per shift. In addition, conventional floor surface preparation produced dust and vibration around sensitive equipment. The solution was a dustless scabbling system for surface preparation, followed by the installation of a high-strength acrylic industrial floor known as Silakal. The work was carried out by Pentek. Silikal bonds to the underlying concrete, so that delamination of the floor will not occur even under severe traffic conditions. Another advantage of this type of flooring is that it cures in one hour, so floor resurfacing has only minimal impact on plant operations. (author)

  2. Radiant Floor Cooling Systems

    DEFF Research Database (Denmark)

    Olesen, Bjarne W.

    2008-01-01

    In many countries, hydronic radiant floor systems are widely used for heating all types of buildings such as residential, churches, gymnasiums, hospitals, hangars, storage buildings, industrial buildings, and smaller offices. However, few systems are used for cooling.This article describes a floor...

  3. School Flooring Factors

    Science.gov (United States)

    McGrath, John

    2012-01-01

    With all of the hype that green building is receiving throughout the school facility-management industry, it's easy to overlook some elements that may not be right in front of a building manager's nose. It is helpful to examine the role floor covering plays in a green building project. Flooring is one of the most significant and important systems…

  4. Perceived floor slipperiness and floor roughness in a gait experiment.

    Science.gov (United States)

    Yu, Ruifeng; Li, Kai Way

    2015-01-01

    Slips and falls contribute to occupational injuries and fatalities globally. Both floor slipperiness and floor roughness affect the occurrence of slipping and falling. Investigations on fall-related phenomena are important for the safety and health of workers. The purposes of this study were to: compare the perceived floor slipperiness before and after walking on the floor; compare the perceived floor slipperiness with and without shoes for males and females; discuss the perceived floor roughness based on barefoot walking; and establish regression models to describe the relationship between perceived floor slipperiness and actual friction of the floors. Male and female subjects walked on 3 m walkways with or without shoes. The perceived floor slipperiness ratings both before and after their walk were collected. The perceived floor slipperiness both before and after walking were significantly affected by both floor and surface conditions. Gender, floor, surface, and footwear conditions were all significant factors affecting the adjustment of perceived floor slipperiness. The subjects made more adjustment on perceived floor slipperiness rating when they had shoes on than when they were barefooted. Regression models were established to describe the relationship between perceived floor slipperiness and floor coefficient of friction. These models may be used to estimate perceived floor slipperiness, or in reverse, the coefficient of friction of the floor, so as to prevent slipping and falling in workplaces.

  5. 6th world congress of Nuclear Medicine and Biology, October 23-28, 1994, Sydney, Australia. Abstracts

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    The supplement presents 962 abstracts of papers or posters presented at the 6th World Congress of Nuclear Medicine and Biology, held from 23-28 October 1994 in Sydney, Australia. The key subjects of the conference are diagnostic nuclear medicine, with emphasis on scintiscanning, SPET and PET in all fields of medicine. There is an alphabetical author index to facilitate retrieval of individual papers [de

  6. The 15th AINSE nuclear and particle conference at the 6th APPC and 11th AIP congress

    International Nuclear Information System (INIS)

    1994-01-01

    The 1994 AINSE conference was held in Brisbane, at Griffith University in conjunction with the 6th APPC and the 11th Australian Institute of Physics Congress. It focused on physics of elementary particles and fields, nuclear reactions and scattering, neutrinos and dark matter. The proceedings booklet contains the conference programme and talks summaries. Seventy one papers out of the 73 contributions were indexed separately for inclusion in the INIS database

  7. The Efficiency of Cluster Method in Improving the Creative Writing Skill of 6th Grade Students of Primary School

    Science.gov (United States)

    Sahbaz, Namik Kemal; Duran, Gozde

    2011-01-01

    The aim of this research is to search the effect of the cluster method on the creative writing skill of 6th grade students. In this paper, the students of 6-A, studying at Ulas Primary School in 2010-2011 academic year, were divided into two groups as experiment and control. Taking into consideration the various variants, pre-test and last-test…

  8. PREFACE: 6th International Conference on Inverse Problems in Engineering: Theory and Practice

    Science.gov (United States)

    Bonnet, Marc

    2008-07-01

    The 6th International Conference on Inverse Problems in Engineering: Theory and Practice (ICIPE 2008) belongs to a successful series of conferences held up to now following a three-year cycle. Previous conferences took place in Palm Coast, Florida, USA (1993), Le Croisic, France (1996), Port Ludlow, Washington, USA (1999), Angra dos Reis, Brazil (2002), and Cambridge, UK (2005). The conference has its roots on the informal seminars organized by Professor J V Beck at Michigan State University, which were initiated in 1987. The organization of this Conference, which took place in Dourdan (Paris) France, 15-19 June 2008, was made possible through a joint effort by four research departments from four different universities: LEMTA (Laboratoire de Mécanique Théorique et Appliquée, Nancy-Université) LMS (Laboratoire de Mécanique des Solides, Ecole Polytechnique, Paris) LMAC (Laboratoire de Mathématiques Appliquées, UTC Compiègne) LTN (Laboratoire de Thermocinétique, Université de Nantes) It received support from three organizations: SFT (Société Française de Thermique: French Heat Transfer Association) ACSM (Association Calcul de Structures et Simulation : Computational Structural Mechanics Association) GdR Ondes - CNRS (`Waves' Network, French National Center for Scientific Research) The objective of the conference was to provide the opportunity for interaction and cross-fertilization between designers of inverse methods and practitioners. The delegates came from very different fields, such as applied mathematics, heat transfer, solid mechanics, tomography.... Consequently the sessions were organised along mostly methodological topics in order to facilitate interaction among participants who might not meet otherwise. The present proceedings, published in the Journal of Physics: Conference Series, gathers the four plenary invited lectures and the full-length versions of 103 presentations. The latter have been reviewed by the scientific committee (see

  9. The Association between Residence Floor Level and Cardiovascular Disease: The Health and Environment in Oslo Study.

    Science.gov (United States)

    Rohde, Mads K; Aamodt, Geir

    2016-01-01

    Background. Increasingly more people live in tall buildings and on higher floor levels. Factors relating to floor level may protect against or cause cardiovascular disease (CVD). Only one previous study has investigated the association between floor level and CVD. Methods. We studied associations between floor of bedroom and self-reported history of stroke, venous thromboembolism (VTE), and intermittent claudication (IC) among 12.525 inhabitants in Oslo, Norway. We fitted multivariate logistic regression models and adjusted for sociodemographic variables, socioeconomic status (SES), and health behaviors. Additionally, we investigated block apartment residents ( N = 5.374) separately. Results. Trend analyses showed that disease prevalence increased by floor level, for all three outcomes. When we investigated block apartment residents alone, the trends disappeared, but one association remained: higher odds of VTE history on 6th floor or higher, compared to basement and 1st floor (OR: 1.504; 95% CI: 1.007-2.247). Conclusion. Floor level is positively associated with CVD, in Oslo. The best-supported explanation may be residual confounding by building height and SES. Another explanation, about the impact of atmospheric electricity, is also presented. The results underline a need to better understand the associations between residence floor level and CVD and multistory housing and CVD.

  10. Usage of Metaphors in Turkish Language Textbooks Used at 6th, 7th and 8th Grades

    Directory of Open Access Journals (Sweden)

    Esra Karakas

    2013-05-01

    Full Text Available The word “Metaphor”, which is equivalent to the terms “istiare” in Arabic or “eğretileme, transfer of idioms” in Turkish, consists of two parts. “Meta” means “later” or “with” whereas “phora” means transfer or conveyance of word. In the recent years metaphor has been the subject and focuses of several studies, and is used to express a concept or situation with another concept or situation. Starting from 1980s, researchers have studied metaphor and concurrently they examined usage of language. It is now been believed that using metaphors is appropriate in order to be able to understand any phenomenon. Metaphor can be used in encouraging learning and improving creative thinking; it can also provide hints for in-the-class methods, techniques and situations. In this context, metaphors are also essential components for Turkish language textbooks. The purpose of this study is to detect the uses of metaphor in Turkish language textbooks of 6th, 7th and 8th grade students. For this purpose the Turkish language textbooks of 6th, 7th and 8th grade students prepared by the Ministry of National Education (MEB were examined with “content analysis method. Considering that metaphors are effective in learning and improving creative thinking, the importance of using metaphors in textbooks is beyond discussion. The data collected throughout this study show that the metaphors detected in 7th and 8th grade Turkish language textbooks are less in number compared to those found in 6th grade Turkish language textbooks. Another important conclusion is that distribution of metaphors among units is not even. The conclusion of the study is that Turkish language textbooks are not prepared in a sensitive and choosy manner with this respect.

  11. Proceedings of joint meeting of the 6th simulation science symposium and the NIFS collaboration research 'large scale computer simulation'

    International Nuclear Information System (INIS)

    2003-03-01

    Joint meeting of the 6th Simulation Science Symposium and the NIFS Collaboration Research 'Large Scale Computer Simulation' was held on December 12-13, 2002 at National Institute for Fusion Science, with the aim of promoting interdisciplinary collaborations in various fields of computer simulations. The present meeting attended by more than 40 people consists of the 11 invited and 22 contributed papers, of which topics were extended not only to fusion science but also to related fields such as astrophysics, earth science, fluid dynamics, molecular dynamics, computer science etc. (author)

  12. The Early Khazars and Turks in the Byzantium-Persian Wars of Late 6th and Early 7th Centuries

    Directory of Open Access Journals (Sweden)

    E S Galkina

    2011-12-01

    Full Text Available The article is devoted to the political and ethnic history of the Early Khazars and Göktürks in the Ciscaucasia and the problem of balance of forces in this region during the Byzantium-Persian Wars of late 6th and early 7th centuries. In the author's opinion based mainly on Arabic and Byzantine sources, the Western Turkic Khaganate was the main ally of the Byzantine Empire in these wars, and the Khazars remained a part of this Khaganate until at least 630.

  13. The Early Khazars and Turks in the Byzantium-Persian Wars of Late 6th and Early 7th Centuries

    OpenAIRE

    E S Galkina

    2011-01-01

    The article is devoted to the political and ethnic history of the Early Khazars and Göktürks in the Ciscaucasia and the problem of balance of forces in this region during the Byzantium-Persian Wars of late 6th and early 7th centuries. In the author's opinion based mainly on Arabic and Byzantine sources, the Western Turkic Khaganate was the main ally of the Byzantine Empire in these wars, and the Khazars remained a part of this Khaganate until at least 630.

  14. FROM THE "NATIONAL" TO THE POLITICAL CONSCIOUSNESS IN ATHENS OF THE 6TH CENTURY BCE, AND THE EMERGENCE OF DEMOCRACY

    Directory of Open Access Journals (Sweden)

    Eleni Krikona

    2016-04-01

    Full Text Available This paper addresses the construction of a "national" identity of the Athenian inhabitants during the tyrannical governance of Peisistratos and his sons (561/0-511/0 BCE mainly through a series of religious practices, such as the transfer of cults from the rural areas to the city (asty of Athens, the reorganization of the Panathenaia, the establishment of the City Dionysia, etc. The present paper investigates how this developed "national" consciousness in the late 6th century, in the sense of the citizens’ nationalization within the borders of the Athenian city-state, could enable the political unification of Attica and the emergence of Democracy, taking into account the constitutional reforms of Kleisthenes the Alcmeonid, after the expulsion of the Peisistratidai. This paper focuses on the interpretation of the concept of political equality and the formation of a political identity of the Athenians in the late 6th century onwards, two notions which are treated here as very closely integrated. It was that political consciousness, following the constitutional changes of Kleisthenes, which led the Athenians to their first great military victories in the early 5th century over the Persians. These victories, which indisputably confirmed the strength of the constitution, will be brought, in short, into discussion in order to clarify the transition of Athens from the narrow borders of an archaic city-state to the rise of its naval empire in the "golden" 5th century via the newly established Democracy.  

  15. What predicts the selection of nursing as a career choice in 5th and 6th year school students?

    Science.gov (United States)

    Neilson, Gavin R; Jones, Martyn C

    2012-07-01

    Demand for nursing care, and nurses, is growing in the United Kingdom given an increasingly ageing patient population with long-term co-morbidities. An ageing nursing workforce and fewer school leavers entering nursing are key barriers to student nurse recruitment. This paper aims to identify the socio-demographic and correlates nursing as a career choice in 5th and 6th year school students. This cross-sectional descriptive study gathered self-administered questionnaires from a total cohort of 5th and 6th year school students (n=1059) in one educational authority in Scotland. A response rate of 100% was achieved, with 702 students expressing a career choice. Some 71.7% (n=503) of students providing a full data set would never consider nursing, even if they obtained poor grades. Only 28.3% (n=199) would ever consider nursing. Students cited nursing as a career choice if they were female, of average to below average academic ability/achievement, expressed a positive attitude to nursing as a degree subject which was shared by their career guidance teacher. Each additional higher reduced the likelihood of nursing as a career choice by 22%. Nursing is an unpopular career choice amongst school students. Strategies are required to improve the occupational image of nursing in secondary education. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Pelvic floor imaging

    NARCIS (Netherlands)

    Stoker, J.; Halligan, S.; Bartram, C. I.

    2001-01-01

    A greater awareness of the therapies now available for pelvic floor dysfunction has increased demand for specialized imaging of this region. Some of the techniques required are available at relatively few centers, and the purpose of this review is to introduce the emerging subspecialty of pelvic

  17. Pelvic floor muscle function in women with pelvic floor dysfunction

    DEFF Research Database (Denmark)

    Tibaek, Sigrid; Dehlendorff, Christian

    2014-01-01

    The objectives of this study were to investigate the level of pelvic floor muscle (PFM) function in women with pelvic floor dysfunction (PFD) referred by gynaecologists and urologists for in-hospital pelvic floor muscle training (PFMT), and to identity associated factors for a low level of PFM...

  18. 6th Scientific Seminar “Interdisciplinary Archaeological and Natural Scientific Investigations of Cultural Heritage Monuments: Bolgar and Sviyazhsk”

    Directory of Open Access Journals (Sweden)

    Belyaev Alexandr V.

    2017-07-01

    Full Text Available The publication features a brief summary of the results of 6th Scientific Seminar held in Kazan on February 19–20, 2017. The seminar is dedicated to interdisciplinary archaeological and natural scientific investigations conducted within the territory of Bolgar settlement and the island-fortress of Sviyazhsk. The works are conducted by the Institute of Archaeology named after A. Kh. Khalikov of Tatarstan Academy of Sciences within the framework of the implementation of integrated project “Cultural Heritage: the Island Town of Sviyazhsk and Ancient Bolgar”. The investigations were performed with the participation of Russian scientific institutions.The works consisted in the performance of archaeological excavations, field geophysical investigations and laboratory classification of sampled materials into palynological, paleoecological, radiocarbon, tree-ring and other laboratory studies. Besides, monuments located in vicinity of Bolgar and Sviyazhsk are comprehensively investigated. The results of these investigations are discussed at annual scientific seminars held since 2011.

  19. Abstract Book of the NKS Workshop on Radioanalytical Chemistry, Risø, Roskilde, Denmark, 2-6th Sept. 2013

    DEFF Research Database (Denmark)

    This report compiled all abstracts presented in the NKS Workshop on Radioanalytical Chemistry at Risø, Roskilde, Denmark in 2-6th Sept. 2013. Total 35 participants registered to the workshop, among them 18 from Sweden, 5 from Denmark, 3 from Finland, and 3 from Norway, there are also 6 participants...... from Germany, France, Slovenia, Korea, Turkey, and China. The workshop consists two part, 3 days lab practices and 2 days lectures/presentation. 3 lab practices were organized, i.e. (1) Radiochemical separation of Pu and ICP-MS measurement of Pu isotopes; (2) Radiochemical separation of 210Po and 226Ra...... by the participants. The abstracts of all presentations are included in this report....

  20. 6th COSTAM/SFRR (ASEAN/Malaysia) International Workshop on Micronutrients, Oxidative Stress, and the Environment.

    Science.gov (United States)

    Nesaretnam, Kalanithi; Sies, Helmut

    2006-01-01

    The 6(th) COSTAM/SFRR (ASEAN/Malaysia) workshop, "Micronutrients, Oxidative Stress, and the Environment," was held from June 29 to July 2 at Holiday Inn Damai Beach Resort in Kuching, Sarawak. Two hundred twenty participants from 17 countries presented recent advances on natural antioxidants in the area of oxidative stress and molecular aspects of nutrition. Natural products and research are an important program in academic institutions and are experiencing unprecedented interest and growth by the scientific community and public health authorities. Progress is being driven by better understanding of the molecular mechanisms of the relation between oxidative stress and micronutrient action. The gathering of scientists from around the world was fruitful, and we hope that future work will be developed by the formal and informal interactions that took place in this beautiful tropical setting.

  1. 6th Annual Midwest Conference for Undergraduate Women in Physics, January 18-20, 2013, Urbana, Illinois

    Energy Technology Data Exchange (ETDEWEB)

    Pitts, Kevin T. [University of Illinois at Urbana-Champaign

    2016-04-28

    This document is the program for the 6th Annual Midwest Conference for Undergraduate Women in Physics, which was held at the University of Illinois at Urbana-Champaign on January 18-20, 2013. The goals of the conference were to foster a culture in which undergraduate women are encouraged and supported to pursue, and also to succeed in, higher education in physics; to provide career information to students in physics and related fields; to give women the resources, motivation, and confidence to apply to graduate school and successfully complete a Ph.D. program in Physics; to provide information and dispel misconceptions about the application process for graduate school and the diverse employment opportunities in physics and related fields, enabling women to make more informed decisions about their goals and attain them; and to connect female physics students with successful female physicists to whom they can relate and who can act as inspirational role models and mentors.

  2. Gender representations in the illustrations of the 6th Grade Language Textbook used in Greek Elementary School

    Directory of Open Access Journals (Sweden)

    Nikolaos Karintzaidis

    2016-12-01

    Full Text Available This study explores the way in which the two sexes are presented in education and particularly in the illustration of the language textbook used in the 6th Grade of Greek elementary school. In a society where gender equality is constitutionally enshrined and displayed as an educational policy objective, it attempts to examine if school textbook images respond to the demands of social reality, or perpetuate outdated gender stereotyped educational practices. The visual communication system that school textbooks use has the same rhetoric in of the conveyance of ideological and cultural messages as the linguistic system. Therefore, students receive plenty of information from both communication systems about the roles and stereotypes that are considered appropriate for each sex. In the past, several studies have analyzed the linguistic system, while this is the first attempt at an organized and systematic analysis of the visual system in language textbooks, and specifically the one in 6th Grade. Both content analysis, as a measurement technique, and semiotics, as a visual analysis method, were used as a research method. The analysis of data showed that (a the presentation of the two sexes in the illustration of this language textbook is not objectively compared with social changes, (b apart from the quantitative inequality that exists in the presentation of the two sexes, there also appears to be a big difference in qualities such as behavioral characteristics, occupations, and activities, and (c there is a reduction in the representation of outdated gender stereotypes, which is not necessarily positive, as the diversity of roles they undertake in the modern social sphere is not emphasized. Keywords: textbook, illustration, representation, gender roles, stereotypes, semiotics

  3. Proceedings of 6th International Microbeam Workshop/12th L.H. Gray Workshop Microbeam Probes of Cellular Radiation Response

    International Nuclear Information System (INIS)

    Prise, Kevin M.

    2004-01-01

    The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology

  4. Pelvic floor muscle training exercises

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003975.htm Pelvic floor muscle training exercises To use the sharing features on this page, please enable JavaScript. Pelvic floor muscle training exercises are a series of exercises ...

  5. Chronic pelvic floor dysfunction.

    Science.gov (United States)

    Hartmann, Dee; Sarton, Julie

    2014-10-01

    The successful treatment of women with vestibulodynia and its associated chronic pelvic floor dysfunctions requires interventions that address a broad field of possible pain contributors. Pelvic floor muscle hypertonicity was implicated in the mid-1990s as a trigger of major chronic vulvar pain. Painful bladder syndrome, irritable bowel syndrome, fibromyalgia, and temporomandibular jaw disorder are known common comorbidities that can cause a host of associated muscular, visceral, bony, and fascial dysfunctions. It appears that normalizing all of those disorders plays a pivotal role in reducing complaints of chronic vulvar pain and sexual dysfunction. Though the studies have yet to prove a specific protocol, physical therapists trained in pelvic dysfunction are reporting success with restoring tissue normalcy and reducing vulvar and sexual pain. A review of pelvic anatomy and common findings are presented along with suggested physical therapy management. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Effects of using relaxation breathing training to reduce music performance anxiety in 3rd to 6th graders.

    Science.gov (United States)

    Su, Yu-Huei; Luh, Jer-Junn; Chen, Hsin-I; Lin, Chao-Chen; Liao, Miin-Jiun; Chen, Heng-Shuen

    2010-06-01

    The current study examined the effects of applying relaxation breathing training (RBT) as a means to reduce music performance anxiety (MPA) in young, talented musicians. A group of 59 young musicians from 3rd to 6th grade participated in this study, and all of them started RBT twice a week for 2 months prior to the examination. Four tests--2 mos, 1 mos, half an hour and 5 min before the examination--were conducted to examine the level of MPA after the application of RBT. Results show that the degree of MPA 5 min before the trial was lower than the degree of performance anxiety half an hour before the jury (t = -3.683, p < 0.01), which indicated that the RBT was associated with a decrease in MPA. Although a series of RBT exercises was applied, results indicated that when approaching the date of examination, the degree of performance anxiety still increased and reached its maximum half an hour before the jury. The recommendation for future studies is to combine the application of RBT with other methods to expand its effect in reducing MPA.

  7. [Evaluation of the risk of alcohol consumption and tobacco smoking among 6th year students of the Faculty of Medicine].

    Science.gov (United States)

    Bielska, Dorota; Kurpas, Donata; Marcinowicz, Ludmiła; Owłasiuk, Anna; Litwiejko, Alicja; Wojtal, Mariola

    2012-01-01

    Implementing the National Health Program assumed in Poland for the years 2007 2015, family doctors in their everyday work try to contribute to reducing the popularity of tobacco smoking as well as reducing and changing the structure of alcohol consumption, whose aim is to reduce the negative health effects caused by those substances [9]. Non smoking personnel and prohibition of smoking in health care centres are the basis for effective anti-tobacco counsel. The same dependence occurs in the case of alcohol abuse. The aim of the work was to evaluate the knowledge of the effects of alcohol abuse among students of the 6th year of the Faculty of Medicine of UMB (Medical University of Białystok), as well as to analyze the structure of drinking and smoking among the prospective doctors. The study material was collected by means of anonymous surveys carried out before classes belonging to the family medicine subject block. The obtained data showed that the students had only superficial knowledge of the negative health effects of alcohol abuse and tobacco smoking. 26% of female students and 12% of male students smoke regularly. The results of the shortened Alcohol Use Disorders Identification Test (AUDIT), so-called AUDIT-C, showed that 50% of prospective female doctors and 61.1% of prospective male doctors drink alcohol in a risky way.

  8. The Effect of Cooperative Learning Methods on 6th- Grade Students’ Academic Success in Social Studies Course

    Directory of Open Access Journals (Sweden)

    Elif MERAL

    2014-12-01

    Full Text Available The aim of this study is to determine the effect of jigsaw and group research methods used in the application of cooperative learning model on the academic success of secondary school students. Experimental research design, including pre-test and post-test, was used in the study. Work group of the study consisted of 60 6th grade students studying in three different classes of a secondary school in Köprüköy district of Erzurum between 2013-2014 spring semester. The study was conducted with two experimental groups and one control group. The related unit was taught via the related methods for five weeks with experimental groups. Academic Success Test (AST was used as data collection tool of the study. The pre-test and post test scores of experimental and control groups from AST were analyzed by using ANOVA and ANCOVA. According to the AST pre-test and post-test results of research groups, there was no significant difference between pre-test and post-test scores of Jigsaw and Groups Research students in experimental groups, while significant difference was measured between experimental groups and control group.

  9. Bond Strength of 5(th, 6(th and 7(th Generation Bonding Agents to Intracanal Dentin of Primary Teeth.

    Directory of Open Access Journals (Sweden)

    Hossein Afshar

    2015-04-01

    Full Text Available This in-vitro study sought to assess the push-out bond strength of a total etch and 2 self-etch bonding systems to intracanal dentin of primary anterior teeth (PAT.Thirty-six primary anterior teeth were randomly divided into 3 groups of 5(th generation (Single Bond 2, 6(th generation (Clearfil SE and 7(th generation (Single Bond Universal bonding agents. The canal orifice was restored with composite resin and the push-out test was carried out to assess the bond strength. After applying the push-out load, specimens were evaluated under a light microscope at 40X magnification. One-way ANOVA and log-rank test on Kaplan-Meier curves were applied for the comparison of bond strength among the 3 groups.The mean± standard deviation (SD bond strength was 13.6±5.33 MPa for Single Bond 2, 13.85±5.86 MPa for Clearfil SE and 12.28±5.24 MPa for Single Bond Universal. The differences in bond strength among the 3 groups were not statistically significant (P>0.05.All three bonding agents are recommended for use with composite posts in PAT. However, due to high technical sensitivity of the Total Etch system, single or two-step self etch systems may be preferred for uncooperative children.

  10. New safe medicines faster: A proposal for a key action within the European union's 6th framework programme.

    Science.gov (United States)

    Bjerrum, O J

    2000-01-01

    The global competitiveness of the European pharmaceutical industry is under threat. Technology currently available for the development of new medicines is unable to match the pace of drug discovery and design; and the ever-growing demand for safety, efficacy and quality documentation has increased the cost and time involved in getting new medicines on the market. Although the pharmaceutical industry is one of the strongest in Europe in terms of research, innovation, exports and employment, there are severe restrictions on its ability to create wealth and launch safe drugs for the treatment of common and rare afflictions. The present situation should not be allowed to continue. For this reason, the European Federation for Pharmaceutical Sciences (EUFEPS) has proposed a key action under the title "New safe medicines faster" for the forthcoming EU 6th RTD framework programme. The key action has three main objectives: to seek new technologies capable of more effective selection of potential drug candidates for innovative medicines while accommodating safety demands; to use such technologies to speed up the pharmaceutical development process and eliminate bottlenecks created by initial exploratory drug research; and to cultivate a pan-European interdisciplinary network that bridges the gap between industry, academia and regulatory authorities. By involving regulatory authorities early on and fuelling research and innovation with EU money it should be possible to create a new set of recognised European standards whereby new safe medicines can be brought onto the market faster and cheaper.

  11. Yersinia pestis DNA from skeletal remains from the 6(th century AD reveals insights into Justinianic Plague.

    Directory of Open Access Journals (Sweden)

    Michaela Harbeck

    Full Text Available Yersinia pestis, the etiologic agent of the disease plague, has been implicated in three historical pandemics. These include the third pandemic of the 19(th and 20(th centuries, during which plague was spread around the world, and the second pandemic of the 14(th-17(th centuries, which included the infamous epidemic known as the Black Death. Previous studies have confirmed that Y. pestis caused these two more recent pandemics. However, a highly spirited debate still continues as to whether Y. pestis caused the so-called Justinianic Plague of the 6(th-8(th centuries AD. By analyzing ancient DNA in two independent ancient DNA laboratories, we confirmed unambiguously the presence of Y. pestis DNA in human skeletal remains from an Early Medieval cemetery. In addition, we narrowed the phylogenetic position of the responsible strain down to major branch 0 on the Y. pestis phylogeny, specifically between nodes N03 and N05. Our findings confirm that Y. pestis was responsible for the Justinianic Plague, which should end the controversy regarding the etiology of this pandemic. The first genotype of a Y. pestis strain that caused the Late Antique plague provides important information about the history of the plague bacillus and suggests that the first pandemic also originated in Asia, similar to the other two plague pandemics.

  12. Yersinia pestis DNA from skeletal remains from the 6(th) century AD reveals insights into Justinianic Plague.

    Science.gov (United States)

    Harbeck, Michaela; Seifert, Lisa; Hänsch, Stephanie; Wagner, David M; Birdsell, Dawn; Parise, Katy L; Wiechmann, Ingrid; Grupe, Gisela; Thomas, Astrid; Keim, Paul; Zöller, Lothar; Bramanti, Barbara; Riehm, Julia M; Scholz, Holger C

    2013-01-01

    Yersinia pestis, the etiologic agent of the disease plague, has been implicated in three historical pandemics. These include the third pandemic of the 19(th) and 20(th) centuries, during which plague was spread around the world, and the second pandemic of the 14(th)-17(th) centuries, which included the infamous epidemic known as the Black Death. Previous studies have confirmed that Y. pestis caused these two more recent pandemics. However, a highly spirited debate still continues as to whether Y. pestis caused the so-called Justinianic Plague of the 6(th)-8(th) centuries AD. By analyzing ancient DNA in two independent ancient DNA laboratories, we confirmed unambiguously the presence of Y. pestis DNA in human skeletal remains from an Early Medieval cemetery. In addition, we narrowed the phylogenetic position of the responsible strain down to major branch 0 on the Y. pestis phylogeny, specifically between nodes N03 and N05. Our findings confirm that Y. pestis was responsible for the Justinianic Plague, which should end the controversy regarding the etiology of this pandemic. The first genotype of a Y. pestis strain that caused the Late Antique plague provides important information about the history of the plague bacillus and suggests that the first pandemic also originated in Asia, similar to the other two plague pandemics.

  13. The Effect of Interactive Computer Animations Accompanied with Experiments on Grade 6th Students’ Achievements and Attitudes toward Science

    Directory of Open Access Journals (Sweden)

    E. Akpınar

    2007-06-01

    Full Text Available The aim of the present study was to investigate the effect of instruction including interactive computer animations accompanied with experiments over traditionally designed Instruction in 6th grade students’ physics achievement and attitudes toward science. In this study, a quasi-experimental pretest-posttest design was used. As a data collection instruments, physics achievement test and attitude scale toward science were administered to experimental and control group. In the experimental group, the materials were used while doing the experiments and then they did the same experiments interactively on the computer. In the control group, the experiments were done only by materials and the students did not use the computer during the experiments. The findings indicated that there was no significant difference between groups with respect to achievement before the treatment and there was a significant difference between the groups in favor of experimental groups after the treatment. The means of attitude towards science showed no significant difference between the groups before and after treatment.

  14. Ethical, legal, and social aspects of farm animal cloning in the 6th Framework Programme for Research.

    Science.gov (United States)

    Claxton, John; Sachez, Elena; Matthiessen-Guyader, Line

    2004-01-01

    Cloned livestock have potential importance in the provision of improved medicine as well as in the development of livestock production. The public is, however, increasingly concerned about the social and ethical consequences of these advances in knowledge and techniques. There is unevenness throughout Europe in different Member States' attitudes to research into livestock cloning. Although there is EU legislation controlling the use of animals for research purposes, there is no legislation specifically governing cloning in livestock production. The main EU reference is the 9th Opinion of the European Group on Ethics, which states "Cloning of farm animals may prove to be of medical and agricultural as well as economic benefit. It is acceptable only when the aims and methods are ethically justified and when carried out under ethical conditions." The ethical justification includes the avoidance of suffering, the use of the 3Rs principle and a lack of better alternatives. The Commission addresses these issues in the 6th Framework Programme by promoting the integration of ethical, legal and social aspects in all proposals where they are relevant, by fostering ethical awareness and foresight in the proposals, by encouraging public dialogue, and by supporting specific actions to promote the debate. Research must respect fundamental ethical principles, including animal welfare requirements.

  15. Reconstructing the diets of Greek Byzantine populations (6th-15th centuries AD) using carbon and nitrogen stable isotope ratios.

    Science.gov (United States)

    Bourbou, Chryssi; Fuller, Benjamin T; Garvie-Lok, Sandra J; Richards, Michael P

    2011-12-01

    Documentary evidence and artistic representations have traditionally served as the primary sources of information about Byzantine diet. According to these sources, Byzantine diet was based on grain (primarily wheat and barley), oil, and wine, supplemented with legumes, dairy products, meat, and marine resources. Here, we synthesize and compare the results of stable isotope ratio analyses of eight Greek Byzantine populations (6th-15th centuries AD) from throughout Greece. The δ(13) C and δ(15) N values are tightly clustered, suggesting that all of these populations likely consumed a broadly similar diet. Both inland and coastal Byzantine populations consumed an essentially land-based C(3) diet, significant amounts of animal protein, and possibly some C(4) plants, while no evidence of a general dependence on low-δ(15) N legumes was observed. One interesting result observed in the isotopic data is the evidence for the consumption of marine protein at both coastal sites (a reasonable expectation given their location) and for some individuals from inland sites. This pattern contrasts with previous isotopic studies mainly on prehistoric Greek populations, which have suggested that marine species contributed little, or not at all, to the diet. The possibility that fasting practices contributed to marine protein consumption in the period is discussed, as are possible parallels with published isotope data from western European medieval sites. 2011 Wiley Periodicals, Inc.

  16. Prosthetics in antiquity-An early medieval wearer of a foot prosthesis (6th century AD) from Hemmaberg/Austria.

    Science.gov (United States)

    Binder, M; Eitler, J; Deutschmann, J; Ladstätter, S; Glaser, F; Fiedler, D

    2016-03-01

    Even though the earliest prosthetic devices date to the Ancient Egyptian Empire and iconographic sources attest their use in the Greco-Roman world, archaeological evidence for this practice prior to 2nd millennium AD is very scant. In 2013, a skeleton dating to the Frankish period (6th century AD) was excavated at the Hemmaberg in southern Austria. The middle adult male was missing his left foot from above the ankle. In its place, an iron-ring and wooden remains were recovered and interpreted as a prosthesis replacing the lost foot. This represents one of the oldest examples of prosthetic limb replacement associated with the skeleton of its wearer in Europe to date. Analysis through macroscopic assessment, radiography and CT-scanning revealed healing of the lesion even though it may have initially been complicated by osteomyelitis. Atrophy of the left lower leg further indicates immobilisation and suggests survival of several years. Osteoarthritis in the knees and shoulder girdle provides tentative indications towards the functionality of the prosthesis, perhaps aided through a crutch. These findings are set against the historic, archaeological, bioarchaeological and social context of the man in order to discuss whether removal of the foot was due to medical, punitive or traumatic causes. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Social and moral norm differences among Portuguese 1st and 6th year medical students towards their intention to comply with hand hygiene.

    Science.gov (United States)

    Roberto, Magda S; Mearns, Kathryn; Silva, Silvia A

    2012-01-01

    This study examines social and moral norms towards the intention to comply with hand hygiene among Portuguese medical students from 1st and 6th years (N = 175; 121 from the 1st year, 54 from the 6th year). The study extended the theory of planned behaviour theoretical principles and hypothesised that both subjective and moral norms will be the best predictors of 1st and 6th year medical students' intention to comply with hand hygiene; however, these predictors ability to explain intention variance will change according to medical students' school year. Results indicated that the subjective norm, whose referent focuses on professors, is a relevant predictor of 1st year medical students' intention, while the subjective norm that emphasises the relevance of colleagues predicts the intentions of medical students from the 6th year. In terms of the moral norm, 6th year students' intention is better predicted by a norm that interferes with compliance; whereas intentions from 1st year students are better predicted by a norm that favours compliance. Implications of the findings highlight the importance of role models and mentors as key factors in teaching hand hygiene in medical undergraduate curricula.

  18. WINGS Data Release

    DEFF Research Database (Denmark)

    Moretti, A.; Poggianti, B. M.; Fasano, G.

    2014-01-01

    Context. To effectively investigate galaxy formation and evolution, it is of paramount importance to exploit homogeneous data for large samples of galaxies in different environments. Aims. The WIde-field Nearby Galaxy-cluster Survey (WINGS) project aim is to evaluate physical properties of galaxies...... in a complete sample of low redshift clusters to be used as reference sample for evolutionary studies. The WINGS survey is still ongoing and the original dataset will be enlarged with new observations. This paper presents the entire collection of WINGS measurements obtained so far. Methods. We decided to make......, and on the cluster redshift, reaching on average 90% at V ≲ 21.7. Near-infrared photometric catalogs for 26 (in K) and 19 (in J) clusters are part of the database and the number of sources is 962 344 in K and 628 813 in J. Here again the completeness depends on the data quality, but it is on average higher than 90...

  19. [Pelvic floor muscle training and pelvic floor disorders in women].

    Science.gov (United States)

    Thubert, T; Bakker, E; Fritel, X

    2015-05-01

    Our goal is to provide an update on the results of pelvic floor rehabilitation in the treatment of urinary incontinence and genital prolapse symptoms. Pelvic floor muscle training allows a reduction of urinary incontinence symptoms. Pelvic floor muscle contractions supervised by a healthcare professional allow cure in half cases of stress urinary incontinence. Viewing this contraction through biofeedback improves outcomes, but this effect could also be due by a more intensive and prolonged program with the physiotherapist. The place of electrostimulation remains unclear. The results obtained with vaginal cones are similar to pelvic floor muscle training with or without biofeedback or electrostimulation. It is not known whether pelvic floor muscle training has an effect after one year. In case of stress urinary incontinence, supervised pelvic floor muscle training avoids surgery in half of the cases at 1-year follow-up. Pelvic floor muscle training is the first-line treatment of post-partum urinary incontinence. Its preventive effect is uncertain. Pelvic floor muscle training may reduce the symptoms associated with genital prolapse. In conclusion, pelvic floor rehabilitation supervised by a physiotherapist is an effective short-term treatment to reduce the symptoms of urinary incontinence or pelvic organ prolapse. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  20. Modeling of Synergy Between 4th and 6th Harmonic Absorptions of Fast Waves on Injected Beams in DIII-D Tokamak

    International Nuclear Information System (INIS)

    Choi, M.; Pinsker, R. I.; Chan, V. S.; Muscatello, C. M.; Jaeger, E. F.

    2011-01-01

    In recent moderate to high harmonic fast wave heating and current drive experiments in DIII-D, a synergy effect was observed when the 6 th harmonic 90 MHz fast wave power is applied to the plasma preheated by neutral beams and the 4 th harmonic 60 MHz fast wave. In this paper, we investigate how the synergy can occur using ORBIT-RF coupled with AORSA. Preliminary simulations suggest that damping of 4 th harmonic FW on beam ions accelerates them above the injection energy, which may allow significant damping of 6 th harmonic FW on beam ion tails to produce synergy.

  1. The Relationship Between Mathematics And Logic In Terms ofTeachers and the Assesment of 6th Grade Course Books According toThis Relationship

    OpenAIRE

    taş, habip; GÖKHAN, Ayşegül

    2015-01-01

    While referring to the history of science it can be seen that mathematics and logic has a close relationship. Because the basic aim of these sciences is to bring up individuals who can use their mind actively and have an advanced reasoning power. In this research, firstly 6th grade mathematics course books are analysed to identify the the relationship between mathematics and logic in maths education and the applicability of this relation in 6th grade maths course books. Later a scale is appli...

  2. Control System Analyses for the Driver Gas Fill System of the BRL 1/6th Scale LB/TS Test Facility

    Science.gov (United States)

    1993-04-01

    AD-A264 476 Control System Analyses for the Driver Gas Fill System of the BRL 1/6th Scale LB /i’S Test Facility Duane T. Hove Gregory P. Mason ARL-CR...Analyses for the Driver Gas Fill System of the BRL 1/6th Scale LB /TS Test Facility C: DAAA15-90-D-1002 Task 1 6. AUTHOR(S) Duane T. Hove and Gregory P...663 OK) is achieved with a secondary valve relative opening of 0.2 to 0.5 as the primary valve relative opening ranges from 0.25 to 1.0 (Figure 3). 7

  3. Bone loss during partial weight bearing (1/6th gravity) is mitigated by resistance and aerobic exercise in mice

    Science.gov (United States)

    Boudreaux, R. D.; Metzger, C. E.; Macias, B. R.; Shirazi-Fard, Y.; Hogan, H. A.; Bloomfield, S. A.

    2014-06-01

    Astronauts on long duration missions continue to experience bone loss, as much as 1-2% each month, for up to 4.5 years after a mission. Mechanical loading of bone with exercise has been shown to increase bone formation, mass, and geometry. The aim of this study was to compare the efficacy of two exercise protocols during a period of reduced gravitational loading (1/6th body weight) in mice. Since muscle contractions via resistance exercise impart the largest physiological loads on the skeleton, we hypothesized that resistance training (via vertical tower climbing) would better protect against the deleterious musculoskeletal effects of reduced gravitational weight bearing when compared to endurance exercise (treadmill running). Young adult female BALB/cBYJ mice were randomly assigned to three groups: 1/6 g (G/6; n=6), 1/6 g with treadmill running (G/6+RUN; n=8), or 1/6 g with vertical tower climbing (G/6+CLB; n=9). Exercise was performed five times per week. Reduced weight bearing for 21 days was achieved through a novel harness suspension system. Treadmill velocity (12-20 m/min) and daily run time duration (32-51 min) increased incrementally throughout the study. Bone geometry and volumetric bone mineral density (vBMD) at proximal metaphysis and mid-diaphysis tibia were assessed by in vivo peripheral quantitative computed tomography (pQCT) on days 0 and 21 and standard dynamic histomorphometry was performed on undemineralized sections of the mid-diaphysis after tissue harvest. G/6 caused a significant decrease (Pexercise and resistance training, through treadmill running or climb training mitigates decrements in vBMD during 21 days of reduced weight bearing. Consistent with our hypothesis, tower climb training, most pronounced in the tibia mid-diaphysis, provides a more potent osteogenic response compared to treadmill running.

  4. Breakfast patterns among low-income, ethnically-diverse 4th-6th grade children in an urban area

    Science.gov (United States)

    2014-01-01

    Background Increasing school breakfast participation has been advocated as a method to prevent childhood obesity. However, little is known about children’s breakfast patterns outside of school (e.g., home, corner store). Policies that increase school breakfast participation without an understanding of children’s breakfast habits outside of school may result in children consuming multiple breakfasts and may undermine efforts to prevent obesity. The aim of the current study was to describe morning food and drink consumption patterns among low-income, urban children and their associations with relative weight. Methods A cross-sectional analysis was conducted of data obtained from 651 4th-6th graders (51.7% female, 61.2% African American, 10.7 years) in 2012. Students completed surveys at school that included all foods eaten and their locations that morning. Height and weight were measured by trained research staff. Results On the day surveyed, 12.4% of youth reported not eating breakfast, 49.8% reported eating one breakfast, 25.5% reported eating two breakfasts, and 12.3% reported eating three or more breakfasts. The number of breakfasts consumed and BMI percentile showed a significant curvilinear relationship, with higher mean BMI percentiles observed among children who did not consume any breakfast and those who consumed ≥ 3 breakfasts. Sixth graders were significantly less likely to have consumed breakfast compared to younger children. A greater proportion of obese youth had no breakfast (18.0%) compared to healthy weight (10.1%) and overweight youth (10.7%, p = .01). Conclusions When promoting school breakfast, policies will need to be mindful of both over- and under-consumption to effectively address childhood obesity and food insecurity. Clinical trial registration NCT01924130 from http://clinicaltrials.gov/. PMID:24928474

  5. WHEN COMPASSION GROWS WINGS

    African Journals Online (AJOL)

    Nicky

    antiretroviral roll-out in full swing, the. WHEN COMPASSION GROWS WINGS. The free time and expertise given by its deeply committed core of professional volunteers. (including pilots) is the lifeblood of the operation. Red Cross Air Mercy Service volunteer, German national Dr Florian Funk, at the AMS Durban base.

  6. Twisted Winged Endoparasitoids

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 9; Issue 10. Twisted Winged Endoparasitoids - An Enigma for Entomologists. Alpana Mazumdar. General Article Volume 9 Issue 10 October 2004 pp 19-24. Fulltext. Click here to view fulltext PDF. Permanent link:

  7. Sea floor magnetic observatory

    Science.gov (United States)

    Korepanov, V.; Prystai, A.; Vallianatos, F.; Makris, J.

    2003-04-01

    The electromagnetic precursors of seismic hazards are widely accepted as strong evidence of the approaching earthquake or volcano eruption. The monitoring of these precursors are of main interest in densely populated areas, what creates serious problems to extract them at the strong industrial noise background. An interesting possibility to improve signal-to-noise ratio gives the installation of the observation points in the shelf zones near the possible earthquake places, what is fairly possible in most seismically active areas in Europe, e. g. in Greece and Italy. The serious restriction for this is the cost of the underwater instrumentation. To realize such experiments it requires the unification of efforts of several countries (e. g., GEOSTAR) or of the funds of some great companies (e. g., SIO magnetotelluric instrument). The progress in electronic components development as well as the appearance of inexpensive watertight glass spheres made it possible to decrease drastically the price of recently developed sea floor magnetic stations. The autonomous vector magnetometer LEMI-301 for sea bed application is described in the report. It is produced on the base of three-component flux-gate sensor. Non-magnetic housing and minimal magnetism of electronic components enable the instrument to be implemented as a monoblock construction where the electronic unit is placed close to the sensor. Automatic circuit provides convenient compensation of the initial field offset and readings of full value (6 digits) of the measured field. Timing by internal clock provides high accuracy synchronization of data. The internal flash memory assures long-term autonomous data storage. The system also has two-axes tilt measurement system. The methodological questions of magnetometer operation at sea bed were studied in order to avoid two types of errors appearing at such experimental cases. First is sea waving influence and second one magnetometer orientation at its random positioning on

  8. Heat transfer and oil flow studies on a single-stage-to-orbit control-configured winged entry vehicle

    Science.gov (United States)

    Helms, V. T., III; Bradley, P. F.

    1984-01-01

    Results are presented for oil flow and phase change paint heat transfer tests conducted on a 0.006 scale model of a proposed single stage to orbit control configured vehicle. The data were taken at angles of attack up to 40 deg at a free stream Mach number of 10 for Reynolds numbers based on model length of 0.5 x 10 to the 6th power, 1.0 x 10 to the 6th power and 2.0 x 10 to the 6th power. The magnitude and distribution of heating are characterized in terms of angle of attack and Reynolds number aided by an analysis of the flow data which are used to suggest the presence of various three dimensional flow structures that produce the observed heating patterns. Of particular interest are streak heating patterns that result in high localized heat transfer rates on the wing windward surface at low to moderate angles of attack. These streaks are caused by the bow-shock/wing-shock interaction and formation of the wing-shock. Embedded vorticity was found to be associated with these interactions.

  9. [Planimetric measurement of floor space covered by pullets].

    Science.gov (United States)

    Spindler, Birgit; Clauss, Marcus; Briese, Andreas; Hartung, Jörg

    2013-01-01

    The available floor space has a strong impact on the execution of various behaviours of laying hens. Presently, in Germany detailed requirements on the housing of pullets are insufficient. In order to get a first approximation, the floor space covered by pullets was determined by the colour contrast planimetric method KobaPlan. The measurements on standing and sitting pullets were done on a random sample of Lohmann Brown (LB), Lohmann Tradition (LT), Lohmann Selected Leghorn (LSL) and Dekalb White (DW) hybrids from the 6th week of life to 18/20 weeks at regular intervals. The hens were weighed and photographed digitally in a specific planimetric box (n = 2600 photographs from pullets in standing and 1360 in sitting position). Afterwards the KobaPlan software program calculated the animal area.The results showed a correlation between floor space covered by the pullets in standing position and the live weight (R2 = 0.80-0.96). The mean floor space covered by LB and LT at the end of rearing (body weight 1450 +/- 25 g LB and 1500 +/- 25 g LT) was 422.4 +/- 41.9 cm2 (LB) and 446.7 +/- 49.0 cm2 (LT) stand- ing, respectively 448.0 +/- 51.0 cm2 (LB) and 464.5 +/- 42.6 cm2 (LT) sitting. LSL and DW (body weight 1300 +/- 25 g) used 371.0 +/- 41.3 cm2 (LSL) and 349.3 +/- 26.3 cm2 (DW), respectively in standing and 379.5 +/- 41.2 cm2 (LSL) in sitting position. Maximum stocking density recommendation for pullets based on these planimetric results compared with the space allowance in alternative housing systems for laying hens are between eleven and 14 birds/m2. To verify this stocking density recommendation for pullets further studies should be complemented by specific ethological observations.

  10. Anorectal and pelvic floor anatomy

    NARCIS (Netherlands)

    Stoker, Jaap

    2009-01-01

    The anorectum and pelvic floor are crucial in maintaining continence, facilitating evacuation, providing pelvic organ support while in females the pelvic floor is part of the birth canal. The anal sphincter is a multilayered cylindrical structure, including the smooth muscle internal sphincter and

  11. Floor heating maximizes residents` comfort

    Energy Technology Data Exchange (ETDEWEB)

    Tirkkanen, P.; Wikstroem, T.

    1996-11-01

    Storing heat in floors by using economical night-time electricity does not increase the specific consumption of heating. According to studies done by IVO, the optimum housing comfort is achieved if the room is heated mainly by means of floor heating that is evened out by window or ceiling heating, or by a combination of all three forms of heating. (orig.)

  12. Abstracts of the communications presented during the 6th World Rabbit Congress: REPRODUCTION & REPRODUCTION PHYSIOLOGY. Toulouse, July 9-12, 1996

    OpenAIRE

    REPRODUCTION & REPRODUCTION PHYSIOLOGY

    1996-01-01

    Abstract not available. REPRODUCTION & REPRODUCTION PHYSIOLOGY (1996). Abstracts of the communications presented during the 6th World Rabbit Congress: REPRODUCTION & REPRODUCTION PHYSIOLOGY. Toulouse, July 9-12, 1996. World Rabbit Science. 58-67. doi:10.4995/wrs.1996.302 58 67 04

  13. 5th German cardiodiagnostic meeting 2013 with the 6th Leipzig Symposium on non-invasive cardiovascular imaging. Challenges and limit of the non-invasive cardiac imaging

    International Nuclear Information System (INIS)

    2013-01-01

    The proceedings on the German cardiodiagnostic meeting 2013 together with the 6th Leipzig Symposium on non-invasive cardiovascular imaging include abstracts concerning the following topics: Imaging in the rhythmology; adults with congenital cardiac defects; cardiac myopathies - myocarditis; cardiac valves (before and after transcutaneous valve replacement); coronary heart diseases; technical developments.

  14. Integration of physical activity and technology motion devices within a combined 5th and 6th grade science curriculum

    Science.gov (United States)

    Finn, Kevin Eugene

    Background: National recommendations to increase school-based physical activity and promote academic success advise incorporating movement into traditional classroom lessons. Classroom-based physical activities have favorable associations with indicators of cognitive functioning, academic behaviors, and academic achievement. Purpose: This study analyzed the Active Science framework, which incorporated school-based physical activity within interactive science classroom lessons. Specifically, the study measured the effects of the Active Science framework on student physical activity levels in the classroom, student learning of science inquiry skills and content knowledge, and student perceptions of physical activity and science. A secondary purpose was to evaluate the teachers' perceptions on the implementation of the framework. Subjects: Participants were 37 Hispanic girls (age=11.1 +/-0.8 yr) in mixed 5th/6th grade science classes in a private, urban middle school. Methods: Physical activity levels of the students during the Active Science framework were measured using pedometers and heart rate monitors. Pre- and post-tests were used to assess the levels of learning achieved by the students in science inquiry skills and content during the Active Science framework. Student perceptions and attitudes toward science and physical activity were measured during student focus groups and pre-post perception surveys. Lesson plan evaluations completed by the teachers and structured interviews provided data on implementation of the framework. Results: Physical activity results showed heart rate (146 +/-9 bpm); maximal heart rate (196 +/-10.6 bpm); time (35 +/-2.5 mins); steps (3050 +/-402.7); calories (99 +/-8.4 kcal); and distance (1.1 +/-0.2 miles) while performing the activity portion of the science lessons were consistent with national recommendations for accumulating school-based physical activity. Significant increases in science content and skills test scores with a 22

  15. Soma, food of the immortals according to the Bower Manuscript (Kashmir, 6th century A.D.).

    Science.gov (United States)

    Leonti, Marco; Casu, Laura

    2014-08-08

    Food is medicine and vice versa. In Hindu and Ayurvedic medicine, and among human cultures of the Indian subcontinent in general, the perception of the food-medicine continuum is especially well established. The preparation of the exhilarating, gold-coloured Soma, Amrita or Ambrosia, the elixir and food of the 'immortals'-the Hindu pantheon-by the ancient Indo-Aryans, is described in the Rigveda in poetic hymns. Different theories regarding the botanical identity of Soma circulate, but no pharmacologically and historically convincing theory exists to date. We intend to contribute to the botanical, chemical and pharmacological characterisation of Soma through an analysis of two historical Amrita recipes recorded in the Bower Manuscript. The recipes are referred therein as panaceas (clarified butter) and also as a medicine to treat nervous diseases (oil), while no exhilarating properties are mentioned. Notwithstanding this, we hypothesise, that these recipes are related to the ca. 1800 years older Rigvedic Soma. We suppose that the psychoactive Soma ingredient(s) are among the components, possibly in smaller proportions, of the Amrita recipes preserved in the Bower Manuscript. The Bower Manuscript is a medical treatise recorded in the 6th century A.D. in Sanskrit on birch bark leaves, probably by Buddhist monks, and unearthed towards the end of the 19th century in Chinese Turkestan. We analysed two Amrita recipes from the Bower Manuscript, which was translated by Rudolf Hoernle into English during the early 20th century. A database search with the updated Latin binomials of the herbal ingredients was used to gather quantitative phytochemical and pharmacological information. Together, both Amrita recipes contain around 100 herbal ingredients. Psychoactive alkaloid containing species still important in Ayurvedic, Chinese and Thai medicine and mentioned in the recipe for 'Amrita-Prâsa clarified butter' and 'Amrita Oil' are: Tinospora cordifolia (Amrita, Guduchi), three

  16. Computer assisted instruction on "learning nutrition flags for deaf 5th grade and 6th grad students": effectiveness of instruction.

    Science.gov (United States)

    Srisorachatr, Suwat; Huadong, Yotsinee; Hudthagosol, Chatrapa; Danthanavanich, Suksiri

    2013-12-01

    Deaf students are of a number of under privilege group for whom there are limited resources for their use, related to health including nutrition. The purpose of this research was to create computer-assisted instruction for "nutrition flags" for 5 and 6th grade students. The content of nutrition included the concept of a healthy balance diets and portion sizes of each food group. The content and pictures for computer-assisted instruction came from existing curriculum, and focused on nutritional content. The contents in this instruction were divided into three units according to students' learning capacity. The story boards were developed by staff including nutritionists, Thai sign language interpreters, and deaf students. Then, the contents and nutrition vocabulary were translated into Thai sign language. After recording the sign language on video, this material was merged with the contents and converted into a computer program. The computer assisted instruction was tested with students from Nakon Pathom School for the Deaf The first trial was conducted with three students, the second with five students, and the third with 15 students during the academic year 2009. The computer- assisted instruction was revised until it met the standard criteria of 80/80. Effectiveness testing was carried out with 36 students for five consecutive days. On the first day, the pre-test was completed, and on days 2-4, the students performed self-study and completed the exercises for units 1-3, with 50 minutes spent on each unit. The post-test was completed on the last day. The study was conducted during the 2010 academic year Data analysis was performed using the t-test. The results showed an effectiveness of 81.85/82.22, which was higher than the standard criteria of 80/80. The post-test average score was higher than the pre-test average score with a statistical significance level at p deaf are that the length of the instruction in each unit should be no longer than 30 minutes and the

  17. Symposium on Turbulent Shear Flows, 6th, Universite de Toulouse III, France, Sept. 7-9, 1987, Proceedings

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    This symposium includes topics on wall flows, unsteady flows, scalar and buoyant transport, instrumentation and techniques, combustion, aerodynamic flows, free flows, geophysical flows, complex flows, separated flows, coherent structures, closures, numerical simulation, and two-phase flows. Papers are presented on the effect of favorable pressure gradients on turbulent boundary layers, the models of hydrodynamic resonances in separated shear flows, the transport of passive scalars in a turbulent channel flow, a pulsed hot-wire probe for near-wall measurements, and vortex dynamics in diffusion flames. Consideration is also given to time-dependent structure in wing-body junction flows, bifurcating air jets at high subsonic speeds, the wake of an axisymmetric body with or without tail separation, coherent structures in quasi-geostrophic jets, and separated flow predictions using a new turbulence model. Additional papers are on stochastic estimation of organized structures in turbulent channel flow, a comparative study of eleven models of turbulence, and a numerical study of a stably stratified mixing layer

  18. Design optimization of deployable wings

    Science.gov (United States)

    Gaddam, Pradeep

    Morphing technology is an important aspect of UAV design, particularly in regards to deployable systems. The design of such system has an important impact on the vehicle's performance. The primary focus of the present research work was to determine the most optimum deployable wing design from 3 competing designs and develop one of the deployable wing designs to test in the research facility. A Matlab code was developed to optimize 3 deployable wing concepts inflatable, inflatable telescopic and rigid-folding wings based on a sequential optimization strategy. The constraints that were part of the code include the packaging constraints during its stowed state, fixed length of the deployed section and the minimum L/D constraint. This code resulted in determining the optimum weight of all the 3 designs, the most optimum weight design is the inflatable wing design. This is a result of the flexible skin material and also due to no rigid parts in the deployed wing section. Another goal of the research involved developing an inflatable telescopic wing. The prototype was tested in a wind tunnel, while the actual wing was tested in the altitude chamber to determine the deployment speed, input pressure, analyze and predict the deployment sequence and behavior of the wing at such high wind speeds and altitudes ranging from 60,000 ft to 90,000 ft. Results from these tests allowed us to conclude the deployment sequence of the telescopic wing followed from the root to the tip section. The results were used to analyze the deployment time of the wing. As expected the deployment time decreased with an increase in input pressure. The results also show us that as the altitude increases, the deployment speed of the wing also increased. This was demonstrated when the wing was tested at a maximum altitude pressure of 90,000ft, well above the design altitude of 60,000ft.

  19. Crustal Ages of the Ocean Floor - Poster

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Crustal Ages of the Ocean Floor Poster was created at NGDC using the Crustal Ages of the Ocean Floor database draped digitally over a relief of the ocean floor...

  20. Low Aspect-Ratio Wings for Wing-Ships

    DEFF Research Database (Denmark)

    Filippone, Antonino; Selig, M.

    1998-01-01

    Flying on ground poses technical and aerodynamical challenges. The requirements for compactness, efficiency, manouverability, off-design operation,open new areas of investigations in the fieldof aerodynamic analysis and design. A review ofthe characteristics of low-aspect ratio wings, in- and out...... of ground, is presented. It is shownthat the performance of such wings is generally inferior to that of slender wings, although in ground placement can yield substantial improvements in the aerodynamic efficiency....

  1. SB6.0: The 6th International meeting on Synthetic Biology, July 9-11, 2013

    Energy Technology Data Exchange (ETDEWEB)

    Kahl, Linda J. [BioBricks Foundation

    2015-04-23

    The Synthetic Biology conference series (SBx.0) is the preeminent academic meeting in synthetic biology. Organized by the BioBricks Foundation, the SBx.0 conference series brings together leading researchers, students, industry executives, and policy makers from around the world to share, consider, debate, and plan efforts to make biology easier to engineer. Historically held every two years, the SBx.0 conferences are held in alternating locations in the United States, Europe, and Asia to encourage global participation and collaboration so that the ramifications of synthetic biology research and development are most likely to be safe ethical, and beneficial. On 9-11 July 2013, the 6th installment of the synthetic biology conference series (SB6.0) was held on the campus of Imperial College London (http://sb6.biobricks.org). The SB6.0 conference was attended by over 700 people, and many more were able to participate via video digital conference (http://sb6.biobricks.org/digital-conference/). Over the course of three days, the SB6.0 conference agenda included plenary sessions, workshops, and poster presentations covering topics ranging from the infrastructure needs arising when “Systematic Engineering Meets Biological Complexity” and design-led considerations for “Connecting People and Technologies” to discussions on “Engineering Biology for New Materials,” “Assessing Risk and Managing Biocontainment,” and “New Directions for Energy and Sustainability.” The $10,150 grant awarded by the U.S. Department of Energy (DE-SC0010233) to the BioBricks Foundation was used to provide partial reimbursement for the travel expenses of leading researchers from the United States to speak at the SB6.0 conference. A total of $9,450 was used to reimburse U.S. speakers for actual expenses related to the SB6.0 conference, including airfare (economy or coach only), ground transportation, hotel, and registration fees. In addition, $700 of the grant was used to offset

  2. Pelvic floor physical therapy in urogynecologic disorders.

    Science.gov (United States)

    Kotarinos, Rhonda K

    2003-08-01

    Physical therapists are uniquely qualified to treat pelvic floor dysfunction with conservative management techniques. Techniques associated with incontinence and support functions of the pelvic floor include bladder training and pelvic floor rehabilitation: pelvic floor exercises, biofeedback therapy, and pelvic floor electrical stimulation. Pain associated with mechanical pelvic floor dysfunction can be treated by physical therapists utilizing various manual techniques and modalities. Research documents that conservative management is effective in treating many conditions associated with pelvic floor dysfunction. Research should be conducted to determine if addressing diastasis recti and contracture of the pelvic floor musculature should be a component of the standard physical therapy protocol.

  3. Floor cooler for floor trough of a nuclear reactor

    International Nuclear Information System (INIS)

    Friedrich, H.J.

    1985-01-01

    Cooling pipes are situated below the floor trough of a BWR, which are connected to the annular distribution or collection pipes. The distribution and collection pipes are connected by parallel hairpin pipes with involute shape to the centre of the floor trough. These hairpin pipes are situated in a lower plane than the annular distribution pipe to the centre and in a higher plane from the centre to the outer annular collector pipe. (orig./HP) [de

  4. Developing Korean Academy of Medical Sciences Guideline for Rating the Impairment in Mental and Behavioral Disorders; A Comparative Study of KNPA's New Guidelines and AMA's 6th Guides

    Science.gov (United States)

    Ryu, Seong Gon; Hong, Narei; Hwang, Sun-Chul; Jung, Han-Young; Jeong, Dushin; Rah, Ueon Woo; Suh, Dong-Soo

    2009-01-01

    Quantifying and rating the impairments due to mental and behavior disorders are difficult for their own characteristics. Korean Academy of Medical Sciences (KAMS) is developing guidelines of rating impairment in mental and behavioral disorders based on Korean Neuropsychiatric Association (KNPA)'s new guidelines. We compared the new KNPA's guidelines and the American Medical Association (AMA)'s 6th Guides in assessing impairment due to mental and behavioral disorders to develop new guidelines of KAMS. Two guidelines are different in diagnosing system, applicable disorders, qualification of assessors, application of scales, contents of assessment and rate of impairment of the whole person. Both AMA's and the proposed guidelines have individual merits and characteristics. There is a limitation in using the 6th AMA's Guides in Korean situation. However to improve objectivity in Korean assessment of psychiatric impairment, the new AMA's Guides can serve as a good reference. PMID:19503692

  5. New Simple Torque-Sensorless Torque Control for Quasi-Perfect Compensation of 6th Harmonic Torque Ripple Due to Nonsinusoidal Distribution of Back EMF of PMSM

    Science.gov (United States)

    Shinnaka, Shinji; Kishida, Hideo

    This paper proposes a new torque-sensorless torque control method for permanent-magnet synchronous motors (PMSMs). The proposed method can almost perfectly compensate the 6th harmonic torque ripple that is caused by the nonsinusoidal distributions of the back EMF and rotor magnetic flux of PMSMs. The torque control system is, in principle, constructed on the basis of the vector control, but has two new dedicated speed-varying devices—a harmonic torque observer and current controller. The speed-varying harmonic torque observer can estimate the harmonic component over a wide speed range, even in the case where the produced torque is constant, and generate a suitable compensating signal. The speed-varying current controller shows stable control performance over a wide speed range, it can fully track the compensated current command containing the dc and 6th harmonic components. The effectiveness of the proposed method is examined and verified through extensive numerical experiments.

  6. Price floors for emissions trading

    International Nuclear Information System (INIS)

    Wood, Peter John; Jotzo, Frank

    2011-01-01

    Price floors in greenhouse gas emissions trading schemes can guarantee minimum abatement efforts if prices are lower than expected, and they can help manage cost uncertainty, possibly as complements to price ceilings. Provisions for price floors are found in several recent legislative proposals for emissions trading. Implementation however has potential pitfalls. Possible mechanisms are government commitments to buy back permits, a reserve price at auction, or an extra fee or tax on acquittal of emissions permits. Our analysis of these alternatives shows that the fee approach has budgetary advantages and is more compatible with international permit trading than the alternatives. It can also be used to implement more general hybrid approaches to emissions pricing. - Research highlights: → Price floors for emissions trading schemes guarantee a minimum carbon price. → Price floors mean that emissions can be less than specified by the ETS cap. → We examine how price floors can relate to different policy objectives. → We compare different mechanisms for implementing a price floor. → We find that a mechanism where there is an extra tax or fee has advantages.

  7. Noise and Man 󈨡. Noise as a Public Health Problem. Proceedings of the International Congress (6th) Held in Nice on July 5 - 9, 1993

    Science.gov (United States)

    1993-07-01

    34-Centre d’Information et de Documentation sur le Bruit) INTERNATIONAL COMMISSION ON THE BIOLOGICAL EFFECTS OF NOISE (ICBEN) Chairman/president Dr. Alain...26 Noise and animal life - Le bruit et la vie animale Invited papers - Communications invit~es Bowles AE - McClenaghan L - Francine JK - Wisely S...France On behalf of the International Commission on Biological Effects of Noise let me welcome you on this first day of the 6th International Congress on

  8. An Analysis on 6th Semester Students' Toefl Experience at English Department of Teachers Training and Education Faculty of Pasir Pengaraian University

    OpenAIRE

    Antoni, Rivi

    2014-01-01

    The main problems faced on this research are most of the students do not have a good preparation on following a test of English as a foreign language(TOEFL) and they are also poor in English skills. Purposes of this research are to explain how students' experiences at TOEFL test and what difficulties are found by the students at 6th semester of English Department of Pasir PengaraianUniversity in completing the TOEFL.

  9. Medical students’ skills in image interpretation before and after training: A comparison between 3rd-year and 6th-year students from two different medical curricula

    International Nuclear Information System (INIS)

    Sendra-Portero, Francisco; Torales-Chaparro, Oscar E.; Ruiz-Gómez, Miguel J.

    2012-01-01

    The purpose of this study was to assess student's performance in the interpretation of images before and after training in radiology, by comparing two groups, 6th-year and 3rd-year students, from two different medical curricula. Students participated in an anonymous evaluation consisting of the interpretation of 12 radiological images accompanied with the salient history and clinical data by answering 60 open-ended questions about technique, anatomy, semiology, and clinics. The number of correct, incorrect and blank responses of each group was used to compare pre- and post-training results. Unpaired two-sample t-test was used to evaluate differences between groups. A significant increase in correct responses was found in both groups after training. The comparison between both groups did not show differences for incorrect answers of the whole test and correct answers about anatomy in the pre-training evaluation. The percentage of correct answers to the median question improved from 15.5% to 53.3% for 6th-year students and from 8.3% to 41.1% for 3rd-year students. The post-training evaluation showed a significant increase of correct answers of 6th-year students with respect to 3rd-year students (mean ± standard deviation 53.6 ± 31.3% and 38.7 ± 29.9% respectively), mainly due to differences in technical and clinical questions. This study provides objective and quantitative evidence of pre- and post-training student skills in image interpretation. The similarities found in the previous level of knowledge and skills of both groups emphasizes the suitable change of the first-time training in radiology, from the 6th to the 3rd year course in medical curricula.

  10. Medical students’ skills in image interpretation before and after training: A comparison between 3rd-year and 6th-year students from two different medical curricula

    Energy Technology Data Exchange (ETDEWEB)

    Sendra-Portero, Francisco, E-mail: sendra@uma.es [Departamento de Radiología y Medicina Física, Facultad de Medicina, Universidad de Málaga, Boulevar Louis Pasteur, 32, 29071 Málaga (Spain); Torales-Chaparro, Oscar E., E-mail: oetjft@terra.es [Departamento de Radiología y Medicina Física, Facultad de Medicina, Universidad de Málaga, Boulevar Louis Pasteur, 32, 29071 Málaga (Spain); Ruiz-Gómez, Miguel J., E-mail: mjrg@uma.es [Departamento de Radiología y Medicina Física, Facultad de Medicina, Universidad de Málaga, Boulevar Louis Pasteur, 32, 29071 Málaga (Spain)

    2012-12-15

    The purpose of this study was to assess student's performance in the interpretation of images before and after training in radiology, by comparing two groups, 6th-year and 3rd-year students, from two different medical curricula. Students participated in an anonymous evaluation consisting of the interpretation of 12 radiological images accompanied with the salient history and clinical data by answering 60 open-ended questions about technique, anatomy, semiology, and clinics. The number of correct, incorrect and blank responses of each group was used to compare pre- and post-training results. Unpaired two-sample t-test was used to evaluate differences between groups. A significant increase in correct responses was found in both groups after training. The comparison between both groups did not show differences for incorrect answers of the whole test and correct answers about anatomy in the pre-training evaluation. The percentage of correct answers to the median question improved from 15.5% to 53.3% for 6th-year students and from 8.3% to 41.1% for 3rd-year students. The post-training evaluation showed a significant increase of correct answers of 6th-year students with respect to 3rd-year students (mean ± standard deviation 53.6 ± 31.3% and 38.7 ± 29.9% respectively), mainly due to differences in technical and clinical questions. This study provides objective and quantitative evidence of pre- and post-training student skills in image interpretation. The similarities found in the previous level of knowledge and skills of both groups emphasizes the suitable change of the first-time training in radiology, from the 6th to the 3rd year course in medical curricula.

  11. Aeroelastic Wing Shaping Using Distributed Propulsion

    Science.gov (United States)

    Nguyen, Nhan T. (Inventor); Reynolds, Kevin Wayne (Inventor); Ting, Eric B. (Inventor)

    2017-01-01

    An aircraft has wings configured to twist during flight. Inboard and outboard propulsion devices, such as turbofans or other propulsors, are connected to each wing, and are spaced along the wing span. A flight controller independently controls thrust of the inboard and outboard propulsion devices to significantly change flight dynamics, including changing thrust of outboard propulsion devices to twist the wing, and to differentially apply thrust on each wing to change yaw and other aspects of the aircraft during various stages of a flight mission. One or more generators can be positioned upon the wing to provide power for propulsion devices on the same wing, and on an opposite wing.

  12. Butterflies regulate wing temperatures using radiative cooling

    Science.gov (United States)

    Tsai, Cheng-Chia; Shi, Norman Nan; Ren, Crystal; Pelaez, Julianne; Bernard, Gary D.; Yu, Nanfang; Pierce, Naomi

    2017-09-01

    Butterfly wings are live organs embedded with multiple sensory neurons and, in some species, with pheromoneproducing cells. The proper function of butterfly wings demands a suitable temperature range, but the wings can overheat quickly in the sun due to their small thermal capacity. We developed an infrared technique to map butterfly wing temperatures and discovered that despite the wings' diverse visible colors, regions of wings that contain live cells are the coolest, resulting from the thickness of the wings and scale nanostructures. We also demonstrated that butterflies use behavioral traits to prevent overheating of their wings.

  13. Stiffness of desiccating insect wings

    Energy Technology Data Exchange (ETDEWEB)

    Mengesha, T E; Vallance, R R [Department of Mechanical Engineering, The George Washington University, 738 Phillips Hall, 801 22nd St NW, Washington, DC 20052 (United States); Mittal, R, E-mail: vallance@gwu.edu [Department of Mechanical Engineering, Johns Hopkins University, 126 Latrobe Hall, 3400 N Charles Street, Baltimore, MD 21218 (United States)

    2011-03-15

    The stiffness of insect wings is typically determined through experimental measurements. Such experiments are performed on wings removed from insects. However, the wings are subject to desiccation which typically leads to an increase in their stiffness. Although this effect of desiccation is well known, a comprehensive study of the rate of change in stiffness of desiccating insect wings would be a significant aid in planning experiments as well as interpreting data from such experiments. This communication presents a comprehensive experimental analysis of the change in mass and stiffness of gradually desiccating forewings of Painted Lady butterflies (Vanessa cardui). Mass and stiffness of the forewings of five butterflies were simultaneously measured every 10 min over a 24 h period. The averaged results show that wing mass declined exponentially by 21.1% over this time period with a time constant of 9.8 h, while wing stiffness increased linearly by 46.2% at a rate of 23.4 {mu}N mm{sup -1} h{sup -1}. For the forewings of a single butterfly, the experiment was performed over a period of 1 week, and the results show that wing mass declined exponentially by 52.2% with a time constant of 30.2 h until it reached a steady-state level of 2.00 mg, while wing stiffness increased exponentially by 90.7% until it reached a steady-state level of 1.70 mN mm{sup -1}. (communication)

  14. AERODYNAMICS OF WING TIP SAILS

    Directory of Open Access Journals (Sweden)

    MUSHTAK AL-ATABI

    2006-06-01

    Full Text Available Observers have always been fascinated by soaring birds. An interesting feature of these birds is the existence of few feathers extending from the tip of the wing. In this paper, small lifting surfaces were fitted to the tip of a NACA0012 wing in a fashion similar to that of wing tip feathers. Experimental measurements of induced drag, longitudinal static stability and trailing vortex structure were obtained.The tests showed that adding wing tip surfaces (sails decreased the induced drag factor and increased the longitudinal static stability. Results identified two discrete appositely rotated tip vortices and showed the ability of wing tip surfaces to break them down and to diffuse them.

  15. Functional anatomy of pelvic floor.

    Science.gov (United States)

    Rocca Rossetti, Salvatore

    2016-03-31

    Generally, descriptions of the pelvic floor are discordant, since its complex structures and the complexity of pathological disorders of such structures; commonly the descriptions are sectorial, concerning muscles, fascial developments, ligaments and so on. On the contrary to understand completely nature and function of the pelvic floor it is necessary to study it in the most unitary view and in the most global aspect, considering embriology, philogenesy, anthropologic development and its multiple activities others than urological, gynaecological and intestinal ones. Recent acquirements succeeded in clarifying many aspects of pelvic floor activity, whose musculature has been investigated through electromyography, sonography, magnetic resonance, histology, histochemistry, molecular research. Utilizing recent research concerning not only urinary and gynecologic aspects but also those regarding statics and dynamics of pelvis and its floor, it is now possible to study this important body part as a unit; that means to consider it in the whole body economy to which maintaining upright position, walking and behavior or physical conduct do not share less than urinary, genital, and intestinal functions. It is today possible to consider the pelvic floor as a musclefascial unit with synergic and antagonistic activity of muscular bundles, among them more or less interlaced, with multiple functions and not only the function of pelvic cup closure.

  16. Functional anatomy of pelvic floor

    Directory of Open Access Journals (Sweden)

    Salvatore Rocca Rossetti

    2016-03-01

    Full Text Available Generally, descriptions of the pelvic floor are discordant, since its complex structures and the complexity of pathological disorders of such structures; commonly the descriptions are sectorial, concerning muscles, fascial developments, ligaments and so on. On the contrary to understand completely nature and function of the pelvic floor it is necessary to study it in the most unitary view and in the most global aspect, considering embriology, philogenesy, anthropologic development and its multiple activities others than urological, gynaecological and intestinal ones. Recent acquirements succeeded in clarifying many aspects of pelvic floor activity, whose musculature has been investigated through electromyography, sonography, magnetic resonance, histology, histochemistry, molecular research. Utilizing recent research concerning not only urinary and gynecologic aspects but also those regarding statics and dynamics of pelvis and its floor, it is now possible to study this important body part as a unit; that means to consider it in the whole body economy to which maintaining upright position, walking and behavior or physical conduct do not share less than urinary, genital, and intestinal functions. It is today possible to consider the pelvic floor as a musclefascial unit with synergic and antagonistic activity of muscular bundles, among them more or less interlaced, with multiple functions and not only the function of pelvic cup closure.

  17. Structural Analysis of a Dragonfly Wing

    NARCIS (Netherlands)

    Jongerius, S.R.; Lentink, D.

    2010-01-01

    Dragonfly wings are highly corrugated, which increases the stiffness and strength of the wing significantly, and results in a lightweight structure with good aerodynamic performance. How insect wings carry aerodynamic and inertial loads, and how the resonant frequency of the flapping wings is tuned

  18. Effect of outer wing separation on lift and thrust generation in a flapping wing system

    International Nuclear Information System (INIS)

    Mahardika, Nanang; Viet, Nguyen Quoc; Park, Hoon Cheol

    2011-01-01

    We explore the implementation of wing feather separation and lead-lagging motion to a flapping wing. A biomimetic flapping wing system with separated outer wings is designed and demonstrated. The artificial wing feather separation is implemented in the biomimetic wing by dividing the wing into inner and outer wings. The features of flapping, lead-lagging, and outer wing separation of the flapping wing system are captured by a high-speed camera for evaluation. The performance of the flapping wing system with separated outer wings is compared to that of a flapping wing system with closed outer wings in terms of forward force and downward force production. For a low flapping frequency ranging from 2.47 to 3.90 Hz, the proposed biomimetic flapping wing system shows a higher thrust and lift generation capability as demonstrated by a series of experiments. For 1.6 V application (lower frequency operation), the flapping wing system with separated wings could generate about 56% higher forward force and about 61% less downward force compared to that with closed wings, which is enough to demonstrate larger thrust and lift production capability of the separated outer wings. The experiments show that the outer parts of the separated wings are able to deform, resulting in a smaller amount of drag production during the upstroke, while still producing relatively greater lift and thrust during the downstroke.

  19. Flapping Wing Micro Air Vehicle Wing Manufacture and Force Testing

    Science.gov (United States)

    2011-03-03

    manufacturing techniques have been developed by various universities for research on Flapping Wing Micro Air Vehicles. Minimal attention though is given...collected at 2kHz (www.polytec.com/psv3d). A 0.25V band-limited white noise input signal is input to a Bogen HTA -125 High Performance Amplifier, which...manufacturing techniques have been developed by various universities for research on Flapping Wing Micro Air Vehicles. Minimal attention though is given

  20. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain); November 23rd-25th 2016; Session “Brain and development”

    OpenAIRE

    --- Various Authors

    2016-01-01

    Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain); November 23rd-25th 2016; Session “Brain and development”ABS 1. CRITICAL CONDITION OF THE FETUS: RISK FACTORS AND PERINATAL OUTCOMES • E. Timokhina, A. Strizhakov, K. DerishABS 2. A MID-STUDY SAFETY CONTROL IN A HYPOTHERMIA PLUS MELATONIN CLINICAL TRIAL • A. Jerez-Calero, E. Fernandez-Marin, L. Serrano-López, AR. Gonzalez-Ramirez, J. Uberos-Fernandez, E. Narbona-LópezABS 3. EARLY PREDICTORS OF NEURODEVELOPMENTAL O...

  1. Proceedings of joint meeting of the 6th simulation science symposium and the NIFS collaboration research 'large scale computer simulation'

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    Joint meeting of the 6th Simulation Science Symposium and the NIFS Collaboration Research 'Large Scale Computer Simulation' was held on December 12-13, 2002 at National Institute for Fusion Science, with the aim of promoting interdisciplinary collaborations in various fields of computer simulations. The present meeting attended by more than 40 people consists of the 11 invited and 22 contributed papers, of which topics were extended not only to fusion science but also to related fields such as astrophysics, earth science, fluid dynamics, molecular dynamics, computer science etc. (author)

  2. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain); November 23rd-25th 2016; Session “Neonatology and NICU clinical care and practices”

    OpenAIRE

    --- Various Authors

    2016-01-01

    Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain); November 23rd-25th 2016; Session “Neonatology and NICU clinical care and practices”ABS 1. BILATERAL CLAVICLE FRACTURE: A RARE CAUSE OF PERSISTENT CRYING • P. Cruz, P. Mendes, M. Anselmo, L. GonçalvesABS 2. NEONATAL TRANSPORT DURATION AND SHORT-TERM OUTCOME IN VERY-LOW-GESTATIONAL-AGE NEONATES • A. Matic, M. Gavrilovic LatinovicABS 3. PEMPHIGOID GESTATIONIS – A RARE CASE IN TWIN PREGNANCY • L. Gonçalves, E. Scorte...

  3. Pelvic Floor Dysfunction in Aging Women

    Directory of Open Access Journals (Sweden)

    Gin-Den Chen

    2007-12-01

    Full Text Available The occurrence of pelvic floor dysfunction may increase steadily during the aging process in women. Pelvic floor dysfunction may be associated with dysfunctions of micturition, defecation, prolapse, and sex. The natural history and mechanism of pelvic floor dysfunction in aged women are not well understood or explored. In this article, we review the effect of age on the prevalence of pelvic floor dysfunction and on the structural and functional changes of the lower urinary tract, anorectum and pelvic floor. Altogether, the aging process has a negative impact on either the function or structure of the lower urinary tract, anorectum and pelvic floor in women.

  4. Steel-board composite floors

    NARCIS (Netherlands)

    Couchman, G.H.; Tomà, A.W.; Brekelmans, J.W.P.M.; Brande, E.L.M.G. van den

    1999-01-01

    Work currently underway in Holland aDd the UK aims to increase the already considerable potential for light steel framing in buildings by developing rules for so-called "dry composites". This paper discusses both theoretical and experimental work to develop validated design mies for floor systems

  5. Ploughing the deep sea floor.

    Science.gov (United States)

    Puig, Pere; Canals, Miquel; Company, Joan B; Martín, Jacobo; Amblas, David; Lastras, Galderic; Palanques, Albert

    2012-09-13

    Bottom trawling is a non-selective commercial fishing technique whereby heavy nets and gear are pulled along the sea floor. The direct impact of this technique on fish populations and benthic communities has received much attention, but trawling can also modify the physical properties of seafloor sediments, water–sediment chemical exchanges and sediment fluxes. Most of the studies addressing the physical disturbances of trawl gear on the seabed have been undertaken in coastal and shelf environments, however, where the capacity of trawling to modify the seafloor morphology coexists with high-energy natural processes driving sediment erosion, transport and deposition. Here we show that on upper continental slopes, the reworking of the deep sea floor by trawling gradually modifies the shape of the submarine landscape over large spatial scales. We found that trawling-induced sediment displacement and removal from fishing grounds causes the morphology of the deep sea floor to become smoother over time, reducing its original complexity as shown by high-resolution seafloor relief maps. Our results suggest that in recent decades, following the industrialization of fishing fleets, bottom trawling has become an important driver of deep seascape evolution. Given the global dimension of this type of fishery, we anticipate that the morphology of the upper continental slope in many parts of the world’s oceans could be altered by intensive bottom trawling, producing comparable effects on the deep sea floor to those generated by agricultural ploughing on land.

  6. Timber floors strengthened with concrete

    NARCIS (Netherlands)

    Blass, H.J.; Linden, M.L.R. van der; Schlager, M.

    1998-01-01

    Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are not new (Pokulka, 1997) and form a simple and practical solution, they are not widely adopted. One of the reasons for this is the Jack of uniform design rules. In this research

  7. Flooring for Schools: Unsightly Walkways

    Science.gov (United States)

    Baxter, Mark

    2011-01-01

    Many mattress manufacturers recommend that consumers rotate their mattresses at least twice a year to help prevent soft spots from developing and increase the product's life span. It's unfortunate that the same kind of treatment can't be applied to flooring for schools, such as carpeting, especially in hallways. Being able to flip or turn a carpet…

  8. Research of Morphing Wing Efficiency

    National Research Council Canada - National Science Library

    Komarov, Valery

    2004-01-01

    This report results from a contract tasking Samara State Aerospace University (SSAU) as follows: The contractor will develop and investigate aerodynamic and structural weight theories associated with morphing wing technology...

  9. Analysis of a Hybrid Wing Body Center Section Test Article

    Science.gov (United States)

    Wu, Hsi-Yung T.; Shaw, Peter; Przekop, Adam

    2013-01-01

    The hybrid wing body center section test article is an all-composite structure made of crown, floor, keel, bulkhead, and rib panels utilizing the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) design concept. The primary goal of this test article is to prove that PRSEUS components are capable of carrying combined loads that are representative of a hybrid wing body pressure cabin design regime. This paper summarizes the analytical approach, analysis results, and failure predictions of the test article. A global finite element model of composite panels, metallic fittings, mechanical fasteners, and the Combined Loads Test System (COLTS) test fixture was used to conduct linear structural strength and stability analyses to validate the specimen under the most critical combination of bending and pressure loading conditions found in the hybrid wing body pressure cabin. Local detail analyses were also performed at locations with high stress concentrations, at Tee-cap noodle interfaces with surrounding laminates, and at fastener locations with high bearing/bypass loads. Failure predictions for different composite and metallic failure modes were made, and nonlinear analyses were also performed to study the structural response of the test article under combined bending and pressure loading. This large-scale specimen test will be conducted at the COLTS facility at the NASA Langley Research Center.

  10. Drag Performance of Twist Morphing MAV Wing

    Directory of Open Access Journals (Sweden)

    Ismail N.I.

    2016-01-01

    Full Text Available Morphing wing is one of latest evolution found on MAV wing. However, due to few design problems such as limited MAV wing size and complicated morphing mechanism, the understanding of its aerodynamic behaviour was not fully explored. In fact, the basic drag distribution induced by a morphing MAV wing is still remained unknown. Thus, present work is carried out to compare the drag performance between a twist morphing wing with membrane and rigid MAV wing design. A quasi-static aeroelastic analysis by using the Ansys-Fluid Structure Interaction (FSI method is utilized in current works to predict the drag performance a twist morphing MAV wing design. Based on the drag pattern study, the results exhibits that the morphing wing has a partial similarities in overall drag pattern with the baseline (membrane and rigid wing. However, based CD analysis, it shows that TM wing induced higher CD magnitude (between 25% to 82% higher than to the baseline wing. In fact, TM wing also induced the largest CD increment (about 20% to 27% among the wings. The visualization on vortex structure revealed that TM wing also produce larger tip vortex structure (compared to baseline wings which presume to promote higher induce drag component and subsequently induce its higher CD performance.

  11. Smoking practices, risk perception of smoking, and environmental tobacco smoke exposure among 6th-grade students in Ciudad Juárez, Mexico.

    Science.gov (United States)

    Bird, Yelena; Moraros, John; Olsen, Larry K; Forster-Cox, Sue; Staines-Orozco, Hugo; Buckingham, Robert W

    2007-02-01

    This study assessed the smoking practices, risk perception of smoking, and environmental tobacco smoke (ETS) exposure among adolescents in Ciudad Juárez, Mexico. We used a cross-sectional method to examine the smoking practices, risk perception of smoking, and ETS exposure of 6th-grade students (N=506), aged 11-13 years, attending six randomly selected middle schools. Schools were classified by school setting (i.e., public vs. private) and socioeconomic status (SES; i.e., low, middle, or high). The results indicated that 6th-grade students attending a public, low-SES school setting in Ciudad Juárez not only exhibited significantly higher rates of ETS exposure at home and in public places (p<.01) but also were more likely to have tried smoking (p<.01) and to be current smokers (p<.01), and were less likely to support a ban on smoking in public places (p<.01), compared with students who attended a private school or a public, middle- or high-SES school setting. These results provide further evidence that public health interventions to prevent initiation of smoking and to assist in smoking cessation among adolescents and to reduce their ETS exposure at home and in public need to target all school-aged students, especially those attending school in a low-SES settings.

  12. How Are Pelvic Floor Disorders Diagnosed?

    Science.gov (United States)

    ... Share Facebook Twitter Pinterest Email Print How are pelvic floor disorders diagnosed? A physical exam may be all ... fee ). This test is used to evaluate the pelvic floor and rectum while the patient is having a ...

  13. Integrated total pelvic floor ultrasound in pelvic floor defaecatory dysfunction.

    Science.gov (United States)

    Hainsworth, A J; Solanki, D; Hamad, A; Morris, S J; Schizas, A M P; Williams, A B

    2017-01-01

    Imaging for pelvic floor defaecatory dysfunction includes defaecation proctography. Integrated total pelvic floor ultrasound (transvaginal, transperineal, endoanal) may be an alternative. This study assesses ultrasound accuracy for the detection of rectocele, intussusception, enterocele and dyssynergy compared with defaecation proctography, and determines if ultrasound can predict symptoms and findings on proctography. Treatment is examined. Images of 323 women who underwent integrated total pelvic floor ultrasound and defaecation proctography between 2011 and 2014 were blindly reviewed. The size and grade of rectocele, enterocele, intussusception and dyssynergy were noted on both, using proctography as the gold standard. Barium trapping in a rectocele or a functionally significant enterocele was noted on proctography. Demographics and Obstructive Defaecation Symptom scores were collated. The positive predictive value of ultrasound was 73% for rectocele, 79% for intussusception and 91% for enterocele. The negative predictive value for dyssynergy was 99%. Agreement was moderate for rectocele and intussusception, good for enterocele and fair for dyssynergy. The majority of rectoceles that required surgery (59/61) and caused barium trapping (85/89) were detected on ultrasound. A rectocele seen on both transvaginal and transperineal scanning was more likely to require surgery than if seen with only one mode (P = 0.0001). If there was intussusception on ultrasound the patient was more likely to have surgery (P = 0.03). An enterocele visualized on ultrasound was likely to be functionally significant on proctography (P = 0.02). There was, however, no association between findings on imaging and symptoms. Integrated total pelvic floor ultrasound provides a useful screening tool for women with defaecatory dysfunction such that defaecatory imaging can avoided in some. Colorectal Disease © 2016 The Association of Coloproctology of Great Britain and Ireland.

  14. TINY FEET NO TREAT TO FLOORS.

    Science.gov (United States)

    SMALLEY, DAVE E.

    A DISCUSSION OF FLOOR MAINTENANCE AND CARE INTERMS OF BROKEN, WARPED, AND OTHERWISE DAMAGED CONDITIONS WHICH OFTEN REQUIRE REPLACEMENTS GIVES SUGGESTIONS FOR VARIOUS TYPES OF FLOORING MATERIAL. WOOD FLOOR CONDITIONS MAY INCLUDE--(1) CUPPED BOARDS, (2) BUCKLING BOARDS, AND (3) BROKEN BOARDS. A DETAILED DISCUSSION IS GIVEN OF METHODS FOR REMOVING…

  15. Branding on the Shop Floor

    OpenAIRE

    Szilvia Gyimóthy; Louise Rygaard Jonas

    2010-01-01

    Service branding is a particular form of emotional management, where employees are regarded as adaptable media, who can be trained to convey corporate values while interacting with customers. This paper examines the identity work of butchers during the brand revitalisation campaign of Kvickly, a Danish supermarket chain. During the implementation of the “Best Butcher in Town”-project, Kvickly’s shop floor becomes an engineered servicescape where the norms of good salesmanship must be performe...

  16. NDE Conference on Civil Engineering : a joint conference of the 7th Structural Materials Technology Conference (SMT) and the 6th International Symposium on Nondestructive Testing in Civil Engineering (NDT-CE)

    Science.gov (United States)

    2007-01-01

    The 2006 NDE conference on Civil Engineering was held in St. Louis, MO on August 14 18, 2006. The conference combined the 7th Structural Materials Technology Conference (SMT) along with the 6th International Symposium on Nondestructive Testing in...

  17. An Exploratory Study of 4th, 5th, and 6th Grade Summer Camp Participants’ Attitudes and Intentions Towards Physical Activity

    Directory of Open Access Journals (Sweden)

    Melissa Cater

    2015-10-01

    Full Text Available Physical inactivity is a growing problem among children, particularly school-aged youth. Research suggests children are especially prone to inactivity in the summer months when access to structured school-time and extra-curricular activities is reduced. Community programs like residential summer camps offer an excellent environment for engaging children in enjoyable physical activities while also helping them learn to be more physically active when they return home. Pre-existing attitudes often influence how much change a program inspires in an individual. The purpose of this study was to explore 4th, 5th, and 6th grade summer camp participants’ attitudes towards physical activity. Results of this study indicate that youth have a fairly neutral, though positive, attitude towards physical activity and that parental support of physical activity is still extremely important, even at this age. Campers also indicated relatively high intentions to remain physically active in the two weeks after the camp ended

  18. Experience-based teaching of acute medicine for extra motivated medical students and young physicians – 4th Emergency Medicine Course and 6th AKUTNĚ.CZ Congress

    Directory of Open Access Journals (Sweden)

    Petr Štourač

    2014-12-01

    Full Text Available Faculty of Medicine of the Masaryk University (MU, and especially its departments focusing on acute medicine, make an active effort to find and to support extra motivated students by organising courses and congresses with simulation-based learning sessions for them. 4th Emergency Medicine Course (EMC and 6th AKUTNĚ.CZ Congress were organised during 2014. EMC was held during a weekend in mid-April for 80 medical students. The congress was held on 22nd November 2014. A group of more than 700 enthusiastic professionals including physicians, nursing staff and medical students interested in acute medicine met again in Brno at the University Campus Bohunice. We also report the evaluation of effectiveness of different types of sessions, as well as its influence on practical skills and the fixation of memory footprint. The website AKUTNĚ.CZ (www.akutne.cz is freely accessible, and anyone can find and watch all the videos and presentations there.

  19. Applied Computational Intelligence in Engineering and Information Technology Revised and Selected Papers from the 6th IEEE International Symposium on Applied Computational Intelligence and Informatics SACI 2011

    CERN Document Server

    Precup, Radu-Emil; Preitl, Stefan

    2012-01-01

    This book highlights the potential of getting benefits from various applications of computational intelligence techniques. The present book is structured such that to include a set of selected and extended papers from the 6th IEEE International Symposium on Applied Computational Intelligence and Informatics SACI 2011, held in Timisoara, Romania, from 19 to 21 May 2011. After a serious paper review performed by the Technical Program Committee only 116 submissions were accepted, leading to a paper acceptance ratio of 65 %. A further refinement was made after the symposium, based also on the assessment of the presentation quality. Concluding, this book includes the extended and revised versions of the very best papers of SACI 2011 and few invited papers authored by prominent specialists. The readers will benefit from gaining knowledge of the computational intelligence and on what problems can be solved in several areas; they will learn what kind of approaches is advised to use in order to solve these problems. A...

  20. Islet cell research brings hope for a diabetes cure: meeting report from the 6(th) annual islet society meeting in Stellenbosch, South Africa.

    Science.gov (United States)

    Tchokonte-Nana, V; Cockburn, I L; Manda, J K; Kotze, P C; Johnson, J D

    2014-01-01

    The International Diabetes Federation predicts that, over the next twenty years, the largest increase in the prevalence of diabetes will be in the Africa region. Recognizing an unmet need for more focus on Africa and engagement with African scholars, the Islet Society held its 6th annual meeting July 20-21, 2014 in Stellenbosch, South Africa. Here, we present a report that covers the presentations and discussion points from that meeting. Work was presented on a variety of topics and included presentations by a significant proportion of Africa diabetes researchers. Overall, it was an excellent conference, with many new international collaborations initiated. We hope that other groups will also respond to the need for more conferences in Africa and focused on Africa.

  1. The mineral depletion of foods available to us as a nation (1940-2002)--a review of the 6th Edition of McCance and Widdowson.

    Science.gov (United States)

    Thomas, David

    2007-01-01

    Over the past 60 years there have been fundamental changes in the quality and quantity of food available to us as a nation. The character, growing method, preparation, source and ultimate presentation of basic staples have changed significantly to the extent that trace elements and micronutrient contents have been severely depleted. This trend, established in a review of the 5th Edition of McCance & Widdowson's The Composition of Foods, is still apparent in this review of the 6th edition of the same work. Concurrently there has been a precipitous change towards convenience and pre-prepared foods containing saturated fats, highly processed meats and refined carbohydrates, often devoid of vital micronutrients yet packed with a cocktail of chemical additives including colourings, flavourings and preservatives. It is proposed that these changes are significant contributors to rising levels of diet-induced ill health. Ongoing research clearly demonstrates a significant relationship between deficiencies in micronutrients and physical and mental ill health.

  2. Prognostic Impact of the 6th and 7th American Joint Committee on Cancer TNM Staging Systems on Esophageal Cancer Patients Treated With Chemoradiotherapy

    International Nuclear Information System (INIS)

    Nomura, Motoo; Shitara, Kohei; Kodaira, Takeshi; Hatooka, Shunzo; Mizota, Ayako; Kondoh, Chihiro; Yokota, Tomoya; Takahari, Daisuke; Ura, Takashi; Muro, Kei

    2012-01-01

    Purpose: The new 7th edition of the American Joint Committee on Cancer TNM staging system is based on pathologic data from esophageal cancers treated by surgery alone. There is no information available on evaluation of the new staging system with regard to prognosis of patients treated with chemoradiotherapy (CRT). The objective of this study was to evaluate the prognostic impact of the new staging system on esophageal cancer patients treated with CRT. Methods and Materials: A retrospective review was performed on 301 consecutive esophageal squamous cell carcinoma patients treated with CRT. Comparisons were made of the prognostic impacts of the 6th and 7th staging systems and the prognostic impacts of stage and prognostic groups, which were newly defined in the 7th edition. Results: There were significant differences between Stages I and III (p < 0.01) according to both editions. However, the 7th edition poorly distinguishes the prognoses of Stages III and IV (p = 0.36 by multivariate analysis) in comparison to the 6th edition (p = 0.08 by multivariate analysis), although these differences were not significant. For all patients, T, M, and gender were independent prognostic factors by multivariate analysis (p < 0.05). For the Stage I and II prognostic groups, survival curves showed a stepwise decrease with increase in stage, except for Stage IIA. However, there were no significant differences seen between each prognostic stage. Conclusions: Our study indicates there are several problems with the 7th TNM staging system regarding prognostic factors in patients undergoing CRT.

  3. Conceptual Study of Rotary-Wing Microrobotics

    National Research Council Canada - National Science Library

    Chabak, Kelson D

    2008-01-01

    This thesis presents a novel rotary-wing micro-electro-mechanical systems (MEMS) robot design. Two MEMS wing designs were designed, fabricated and tested including one that possesses features conducive to insect level aerodynamics...

  4. Aerodynamic control with passively pitching wings

    Science.gov (United States)

    Gravish, Nick; Wood, Robert

    Flapping wings may pitch passively under aerodynamic and inertial loads. Such passive pitching is observed in flapping wing insect and robot flight. The effect of passive wing pitch on the control dynamics of flapping wing flight are unexplored. Here we demonstrate in simulation and experiment the critical role wing pitching plays in yaw control of a flapping wing robot. We study yaw torque generation by a flapping wing allowed to passively rotate in the pitch axis through a rotational spring. Yaw torque is generated through alternating fast and slow upstroke and and downstroke. Yaw torque sensitively depends on both the rotational spring force law and spring stiffness, and at a critical spring stiffness a bifurcation in the yaw torque control relationship occurs. Simulation and experiment reveal the dynamics of this bifurcation and demonstrate that anomalous yaw torque from passively pitching wings is the result of aerodynamic and inertial coupling between the pitching and stroke-plane dynamics.

  5. Waving Wing Aerodynamics at Low Reynolds Numbers

    Science.gov (United States)

    2010-07-01

    wing. An attached leading edge vortex has been observed by multiple research groups on both mechanical wing flappers (8; 22; 21; 4) and revolving wing...observed by Ellington et al. (8) in their earlier experiments on the mechanical hawkmoth flapper at Re ≈ 10,000. In these experiments the spanwise flow...on mechanical wing flappers at similar Reynolds numbers, Re ≈ 1,000 and 1,400 respectively. Both sets of experiments revealed a stable attached

  6. Scaling on a limestone flooring

    Science.gov (United States)

    Carmona-Quiroga, P. M.; Blanco-Varela, M. T.; Martínez-Ramírez, S.

    2012-04-01

    Natural stone can be use on nearly every surface, inside and outside buildings, but decay is more commonly reported from the ones exposed to outdoor aggressively conditions. This study instead, is an example of limestone weathering of uncertain origin in the interior of a residential building. The stone, used as flooring, started to exhibit loss of material in the form of scaling. These damages were observed before the building, localized in the South of Spain (Málaga), was inhabited. Moreover, according to the company the limestone satisfies the following European standards UNE-EN 1341: 2002, UNE-EN 1343: 2003; UNE-EN 12058: 2004 for floorings. Under these circumstances the main objective of this study was to assess the causes of this phenomenon. For this reason the composition of the mortar was determined and the stone was characterized from a mineralogical and petrological point of view. The last material, which is a fossiliferous limestone from Egypt with natural fissure lines, is mainly composed of calcite, being quartz, kaolinite and apatite minor phases. Moreover, under different spectroscopic and microscopic techniques (FTIR, micro-Raman, SEM-EDX, etc) samples of the weathered, taken directly from the buildings, and unweathered limestone tiles were examined and a new mineralogical phase, trona, was identified at scaled areas which are connected with the natural veins of the stone. In fact, through BSE-mapping the presence of sodium has been detected in these veins. This soluble sodium carbonate would was dissolved in the natural waters from which limestone was precipitated and would migrate with the ascendant capilar humidity and crystallized near the surface of the stone starting the scaling phenomenon which in historic masonry could be very damaging. Therefore, the weathering of the limestone would be related with the hygroscopic behaviour of this salt, but not with the constructive methods used. This makes the limestone unable to be used on restoration

  7. Wing area, wing growth and wing loading of common sandpipers Actitis hypoleucos

    OpenAIRE

    Yalden, Derek; Yalden, D. W.

    2012-01-01

    This study investigates the changes in wing length, area and loading in Common Sandpipers as chicks grow, and as adults add extra mass (during egg-laying or before migration). Common Sandpiper chicks weigh about 17 g and have "hands" that are about 35 mm long at one week old, when the primaries are just emerging from their sheaths. They grow steadily to reach about 40 g, with hands about 85 mm long, at 19 days, when they are just about fledging. Their wings have roughly adult chord width at t...

  8. How Do Wings Generate Lift?

    Indian Academy of Sciences (India)

    Newton's second law of motion. Hence if a wing can generate lift equal to its weight (total weight of the vehicle) it can balance the gravitational pull and can maintain level flight. The equations for fluid flow that are equivalent to the second law are the well- known Navier–Stokes (N–S) equations [1]. These equations have.

  9. Werner helicase wings DNA binding

    OpenAIRE

    Hoadley, Kelly A.; Keck, James L.

    2010-01-01

    In this issue of Structure, Kitano et al. describe the structure of the DNA-bound winged-helix domain from the Werner helicase. This structure of a RecQ/DNA complex offers insights into the DNA unwinding mechanisms of RecQ family helicases.

  10. On Wings: Aerodynamics of Eagles.

    Science.gov (United States)

    Millson, David

    2000-01-01

    The Aerodynamics Wing Curriculum is a high school program that combines basic physics, aerodynamics, pre-engineering, 3D visualization, computer-assisted drafting, computer-assisted manufacturing, production, reengineering, and success in a 15-hour, 3-week classroom module. (JOW)

  11. Mode of delivery and Pelvic floor disorder

    International Nuclear Information System (INIS)

    Noor, R.; Neelam, H.; Bashir, M.S.

    2017-01-01

    Objective: To compare pelvic floor dysfunction in non pregnant women who had delivered vaginally versus those with cesarean delivery. Methodology: The prevalence of pelvic floor disorders among non pregnant women was assesses by using a standardized tool pelvic floor distress inventory short form (PFDI-20). Data was collected from Jinnah Hospital Lahore, Pakistan. Results: Total numbers of participants were 278. 47.12% subjects had moderate, 36.69% miner and 16.19% had severe pelvic floor dysfunction. The symptoms of pelvic organ prolapse were more prevalent (mean value is 59.1876) than Urinary Distress (mean value is 40.5426), while the Colorectal-Anal Distress (mean value is 35.9150) were least prevalent. Conclusion: Pelvic floor disorders are very common among females and are strongly associated with mode of delivery. Although spontaneous vaginal birth was extensively associated with pelvic floor disorders the instrumental delivery affects most. (author)

  12. [Patterns of drinking alcohol tobacco smoking among 6th year students of the faculty of medicine in Białstok].

    Science.gov (United States)

    Bielska, Dorota; Kurpas, Donata; Ołtarzewska, Alicja; Piotrowska-Depta, Maria; Gomółka, Ewa; Wojtal, Mariola; Florek, Ewa

    2014-01-01

    Alcohol and tobacco are legal, easily available addictive substances. There are no universal criteria of safe alcohol consumption but some scientific studies have allowed for determination of consumption levels helpful in evaluation of the pattern of drinking and evoking readiness to limit the amount of consumed alcohol. The aim of the work was to evaluate and compare the knowledge of 6th year students of the Faculty of Medicine of the Medical University of Biatystok in the academic years 2011/12 and 2012/13 concerning the effects of alcohol abuse, as well as to determine their drinking patterns and tobacco smoking structure. The study material was collected by means of anonymous voluntary surveys carried out before classes concerning the issues of addictions within the framework of family medicine subject block. 356 students took part in the study: 226 (63.5%) women and 130 (36.5%) men (palcohol abuse; 63.43% had an average level of knowledge and 31.71% - a low one. 51,32% women and 62,3% men drank alcohol in a hazardous way. A relation was found between a low level of knowledge and the amount of alcohol consumed on a typical drinking day (rS=-0.15, p=0.03) as well as between a low level of knowledge and hazardous drinking (rS=-0.13, p=0.03). Among the respondents, 18,58% women and 14,63% men smoked cigarettes regularly. Those who are 6th year students in the academic year 2012/13 usually had started smoking within the first three years of study at the Medical University and drank greater amounts of alcohol on a typical drinking day than students surveyed in the 2011/12 year. A correlation was found between tobacco smoking and a greater frequency of getting drunk occasionally (rS=-0.18, p=0.002) among students of both years. Insufficient knowledge on the effects of alcohol abuse and smoking coexist with a higher risk of drinking alcohol.

  13. Crash Tests of Protective Airplane Floors

    Science.gov (United States)

    Carden, H. D.

    1986-01-01

    Energy-absorbing floors reduce structural buckling and impact forces on occupants. 56-page report discusses crash tests of energy-absorbing aircraft floors. Describes test facility and procedures; airplanes, structural modifications, and seats; crash dynamics; floor and seat behavior; and responses of anthropometric dummies seated in airplanes. Also presents plots of accelerations, photographs and diagrams of test facility, and photographs and drawings of airplanes before, during, and after testing.

  14. Enhanced Accelerated Drying of Concrete Floor Slabs

    OpenAIRE

    Holmes, Niall; West, Roger P.

    2013-01-01

    Concrete floor slabs dry out through a process of evaporation and diffusion provided the ambient environment promotes such drying. Impermeable floor coverings laid on concrete slabs can be subject to damage caused by high levels of residual moisture trapped by premature sealing of the surface. This damage can include timber floor boards buckling, vinyls blistering or tiles lifting. Whether or not it is safe to apply such a covering depends on whether the slab is sufficiently dry. Furthermore,...

  15. Review Results on Wing-Body Interference

    Directory of Open Access Journals (Sweden)

    Frolov Vladimir

    2016-01-01

    Full Text Available The paper presents an overview of results for wing-body interference, obtained by the author for varied wing-body combinations. The lift-curve slopes of the wing-body combinations are considered. In this paper a discrete vortices method (DVM and 2D potential model for cross-flow around fuselage are used. The circular and elliptical cross-sections of the fuselage and flat wings of various forms are considered. Calculations showed that the value of the lift-curve slopes of the wing-body combinations may exceed the same value for an isolated wing. This result confirms an experimental data obtained by other authors earlier. Within a framework of the used mathematical models the investigations to optimize the wing-body combination were carried. The present results of the optimization problem for the wing-body combination allowed to select the optimal geometric characteristics for configuration to maximize the values of the lift-curve slopes of the wing-body combination. It was revealed that maximums of the lift-curve slopes for the optimal mid-wing configuration with elliptical cross-section body had a sufficiently large relative width of the body (more than 30% of the span wing.

  16. Hematology oncology practice in the Asia-Pacific APHCON survey results from the 6th international hematologic malignancies conference: bridging the gap 2015, Beijing, China.

    Science.gov (United States)

    Huang, Xiao Jun; Liu, Kaiyan; Ritchie, David; Andersson, Borje; Lu, Jin; Hou, Jian; Burguera, Adolfo de la Fuente; Wang, JianXiang; Yeoh, Allen; Yan, Chenhua; Zhou, Daobin; Tan, Daryl; Kim, Dong Wook; Wu, Depei; Shpall, Elizabeth; Kornblau, Stephen; Neelapu, Sattava; Hongeng, Suradej; Li, Jianyong; Hu, Jiong; Zhang, Lian Sheng; Wang, Michael; Malhotra, Pankaj; Jiang, Qian; Qin, Yazhen; Wong, Raymond; Champlin, Richard; Hagemeister, Frederick; Westin, Jason; Iyer, Swaminathan; Mathews, Vikram; Wang, Yu; Hu, Yu; Xiao, Zhijian; Shao, Zonghong; Orlowski, Robert Z; Chim, Chor Sang; Mulligan, Stephen; Sanz, Miguel; Ozawa, Keiya; Parmar, Simrit; Issaragrisil, Surapol

    2017-06-20

    This report serves as a snapshot of the state-of-knowledge in the Asia Pacific (APAC) Hematology Oncology community, and establishes a baseline for longitudinal investigations to follow changes in best practices over time. The objective of this study was to understand the approach to hematologic diseases, common standards of care and best practices, issues that remain controversial or debated, and educational or resource gaps that warrant attention. We used mobile application to disseminate and distribute questionnaires to delegates during the 6th international hematologic malignancies conference hosted by the APAC Hematology Consortium at Beijing, China. User responses were collected in an anonymous fashion. We report survey results in two ways: the overall responses, and responses as stratified between Chinese physicians and "Other" represented nationalities. Overall geographical concordance in survey responses was positive and strong. Perhaps more interesting than instances of absolute agreement, these data provide a unique opportunity to identify topics in which physician knowledge or opinions diverge. We assigned questions from all modules to broad categories of: patient information; diagnosis; treatment preference; transplantation; and general knowledge/opinion. On average, we observed a geographic difference of 15% for any particular answer choice, and this was fairly constant across survey modules. These results reveal utility and need for widespread and ongoing initiatives to assess knowledge and provide evidence-based education in real time. The data will be made more valuable by longitudinal participation, such that we can monitor changes in the state of the art over time.

  17. A COMPARATIVE STUDY of HEALTH UNITS of the 6TH GREEK HEALTH REGION DURING an ECONOMIC CRISIS PERIOD through DATA ENVELOPMENT ANALYSIS METHOD

    Directory of Open Access Journals (Sweden)

    Georgios I. Farantos

    2016-12-01

    Full Text Available The aim of the present study is to investigate the change in relative efficiency through a comparative study on the efficiency of health units within a Greek health region during an economic crisis environment, with the aid of a new application. The study is designed to collect data from the 6th Greek health region and to process that data with the use of Data Envelopment Analysis software. The study methodology extends to the application of the study of efficiency of organisations and the integration of the analysis in an interpretation framework within the economic crisis. The study refers to similar hospital clinics (pathological within one of the largest Greek health regions in order for the results to be comparable. We estimate and calculate the DEA sizes based on the CRS, VRS and SE models of the Health Units of a Greek health region, with the use of a new application which calculates the change of overall relative Efficiency during the crisis. The study of the change in the efficiency of health units leads to useful conclusions on the negative changes in the observed efficiency of the units and the integration of the studies on the change of efficiency in the Integrated crisis management. The study ranks the efficient and inefficient units and suggests ways of improvement. This study allows for further case studies in the future and the completion of the integrated crisis management model through comparative studies on the efficiency of systems.

  18. Effects of the 6th September 2002 earthquake: damage amplification in the south-eastern sector of Palermo explained by GIS technology

    Directory of Open Access Journals (Sweden)

    A. Zuccarello

    2003-06-01

    Full Text Available During the 6th September 2002 earthquake the highest damage level in Palermo was observed in the SE sector. This is a recent urbanization area where reinforced concrete structures predominate. A detailed analysis of soil properties in Palermo was carried out by City-GIS to investigate a possible role of nearsurface geology on earthquake effects. City-GIS is a tool dedicated to natural hazard evaluation in urban areas. The availability of high density of well log data (stratigraphic and geotechnical allowed a realistic modeling of surface geology and physical-mechanical properties that control the seismic response. In wide zones of the above mentioned sector of Palermo, outcropping terrains are composed of thin calcarenite layers, lying above remarkably thick siltyclayey sands that overlay the Numidian Flysch, commonly considered the bedrock of Quaternary sediments. Since silty-clayey sands feature greater deformability properties (Young's modulus and smaller resistance properties (undrained cohesion and shear resistance angle than Numidian Flysch, these zones of the SE sector exhibit high values of the acoustic impedance contrast. Moreover, a quite wide portion of the study area, crossed by the Oreto River, is characterized by very thick alluvial deposits. Here, the significant lateral variations of the lithostratigraphic geometry may be an additional cause of strong site effects.

  19. THE SOCIAL AND ECONOMIC POLICY GUIDELINES FOR CUBA’S COMMUNIST PARTY 6TH CONGRESS. A VIEW FROM THE POLITICAL ECONOMY

    Directory of Open Access Journals (Sweden)

    Vicente E. Escandell-Sosa

    2016-01-01

    Full Text Available Our goal with this paper is to make a critical review to the Social and Economic Policy Guidelines for Cuba’s Communist Party 6th Congress. It is true these guidelines try to improve Cuban economy by eliminating unbearable charges in the current scenario and to amend grave voluntaryist errors of the past. In truth, there is a great deal of expectation among the population with these guidelines, and it could be catalogued as a present day vision from different sectors of the State towards an "upgrading of the country’s economic model» which constitutes the official traditional conception of our social regime, introducing at the same time, new supplementary aspects like the introduction of some forms of property, liberalization of some private small business, cooperatives etc. a flexibleness on business management among others. However the application of such Guidelines could bring about many an impact which has to be foreseen before they turn into problems contrary to the State goals. 

  20. The beginning of metallurgy in the southern Levant: a late 6th millennium CalBC copper awl from Tel Tsaf, Israel.

    Science.gov (United States)

    Garfinkel, Yosef; Klimscha, Florian; Shalev, Sariel; Rosenberg, Danny

    2014-01-01

    The beginning of metallurgy in the ancient Near East attracts much attention. The southern Levant, with the rich assemblage of copper artifacts from the Nahal Mishmar cave and the unique gold rings of the Nahal Qanah cave, is regarded as a main center of early metallurgy during the second half of the 5th millennium CalBC. However, a recently discovered copper awl from a Middle Chalcolithic burial at Tel Tsaf, Jordan Valley, Israel, suggests that cast metal technology was introduced to the region as early as the late 6th millennium CalBC. This paper examines the chemical composition of this item and reviews its context. The results indicate that it was exported from a distant source, probably in the Caucasus, and that the location where it was found is indicative of the social status of the buried individual. This rare finding indicates that metallurgy was first diffused [corrected] to the southern Levant through exchange networks and only centuries later involved local productionThis copper awl, the earliest metal artifact found in the southern Levant, indicates that the elaborate Late Chalcolithic metallurgy developed from a more ancient tradition.

  1. Building with electromagnetic shield structure for individual floors

    International Nuclear Information System (INIS)

    Takahashi, T.; Nakamura, M.; Yabana, Y.; Ishikawa, T.; Nagata, K.

    1991-01-01

    This invention relates to a building having a floor-by-floor electromagnetic shield structure well-suited for application to an information network system in which an electromagnetically shielded space is divided by individual floors and electric waves are utilized within the building on a floor-by-floor basis. (author). 8 figs

  2. Constructing international floors for language learning ends ...

    African Journals Online (AJOL)

    Constructing international floors for language learning ends: reflectng on a teacher upgrading course. ... Journal for Language Teaching ... that teachers, as superordinates in an authoritybased relationship, may consciously construct configurations of the interactional floor to achieve pre-selected language learning ends.

  3. Biomechanics of the pelvic floor musculature

    NARCIS (Netherlands)

    Janda, S.

    2006-01-01

    The present thesis was motivated by two main goals. The first research goal of the thesis was to understand the complex biomechanical behaviour of the pelvic floor muscles. The second goal was to study the mechanism of the pelvic organ prolapse (genital prolapse). The pelvic floor in humans is a

  4. 9 CFR 91.26 - Concrete flooring.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000 psi...

  5. Minimising infection--from floor to ceiling.

    Science.gov (United States)

    Peake, Sarah

    2014-10-01

    Dr Sarah Peake, product sustainability manager at specialty chemicals company, Sika--which provides solutions for concrete, waterproofing, roofing, flooring, refurbishment, sealing and bonding, and industry--looks at the fundamentals for keeping floors, walls, and ceilings in hospitals and other healthcare facilities 'in excellent health'.

  6. Laparoscopic Pelvic Floor Repair Using Polypropylene Mesh

    Directory of Open Access Journals (Sweden)

    Shih-Shien Weng

    2008-09-01

    Conclusion: Laparoscopic pelvic floor repair using a single piece of polypropylene mesh combined with uterosacral ligament suspension appears to be a feasible procedure for the treatment of advanced vaginal vault prolapse and enterocele. Fewer mesh erosions and postoperative pain syndromes were seen in patients who had no previous pelvic floor reconstructive surgery.

  7. A Drosophila wing spot test

    International Nuclear Information System (INIS)

    Ayaki, Toshikazu; Yoshikawa, Isao; Niikawa, Norio; Hoshi, Masaharu.

    1986-01-01

    A Drosophila wing spot test system was used to investigate the effects of low doses of X-rays, gamma rays, and both 2.3 and 14.1 MeV neutrons on somatic chromosome mutation (SCM) induction. The incidence of SCM was significantly increased with any type of radiation, with evident linear dose-response relationship within the range of 3 to 20 cGy. It was estimated that relative biological effectiveness value for SCM induction of 2.3 MeV neutrons to X-rays and gamma rays is much higher than that of 14.1 MeV neutrons to those photons (2.4 vs 8.0). The Drosophila wing spot test system seems to become a promising in vivo experimental method for higher animals in terms of the lack of necessity for a marvelously large number of materials required in conventional test system. (Namekawa, K.)

  8. Aerodynamic effects of flexibility in flapping wings

    Science.gov (United States)

    Zhao, Liang; Huang, Qingfeng; Deng, Xinyan; Sane, Sanjay P.

    2010-01-01

    Recent work on the aerodynamics of flapping flight reveals fundamental differences in the mechanisms of aerodynamic force generation between fixed and flapping wings. When fixed wings translate at high angles of attack, they periodically generate and shed leading and trailing edge vortices as reflected in their fluctuating aerodynamic force traces and associated flow visualization. In contrast, wings flapping at high angles of attack generate stable leading edge vorticity, which persists throughout the duration of the stroke and enhances mean aerodynamic forces. Here, we show that aerodynamic forces can be controlled by altering the trailing edge flexibility of a flapping wing. We used a dynamically scaled mechanical model of flapping flight (Re ≈ 2000) to measure the aerodynamic forces on flapping wings of variable flexural stiffness (EI). For low to medium angles of attack, as flexibility of the wing increases, its ability to generate aerodynamic forces decreases monotonically but its lift-to-drag ratios remain approximately constant. The instantaneous force traces reveal no major differences in the underlying modes of force generation for flexible and rigid wings, but the magnitude of force, the angle of net force vector and centre of pressure all vary systematically with wing flexibility. Even a rudimentary framework of wing veins is sufficient to restore the ability of flexible wings to generate forces at near-rigid values. Thus, the magnitude of force generation can be controlled by modulating the trailing edge flexibility and thereby controlling the magnitude of the leading edge vorticity. To characterize this, we have generated a detailed database of aerodynamic forces as a function of several variables including material properties, kinematics, aerodynamic forces and centre of pressure, which can also be used to help validate computational models of aeroelastic flapping wings. These experiments will also be useful for wing design for small robotic

  9. Aerodynamic effects of flexibility in flapping wings.

    Science.gov (United States)

    Zhao, Liang; Huang, Qingfeng; Deng, Xinyan; Sane, Sanjay P

    2010-03-06

    Recent work on the aerodynamics of flapping flight reveals fundamental differences in the mechanisms of aerodynamic force generation between fixed and flapping wings. When fixed wings translate at high angles of attack, they periodically generate and shed leading and trailing edge vortices as reflected in their fluctuating aerodynamic force traces and associated flow visualization. In contrast, wings flapping at high angles of attack generate stable leading edge vorticity, which persists throughout the duration of the stroke and enhances mean aerodynamic forces. Here, we show that aerodynamic forces can be controlled by altering the trailing edge flexibility of a flapping wing. We used a dynamically scaled mechanical model of flapping flight (Re approximately 2000) to measure the aerodynamic forces on flapping wings of variable flexural stiffness (EI). For low to medium angles of attack, as flexibility of the wing increases, its ability to generate aerodynamic forces decreases monotonically but its lift-to-drag ratios remain approximately constant. The instantaneous force traces reveal no major differences in the underlying modes of force generation for flexible and rigid wings, but the magnitude of force, the angle of net force vector and centre of pressure all vary systematically with wing flexibility. Even a rudimentary framework of wing veins is sufficient to restore the ability of flexible wings to generate forces at near-rigid values. Thus, the magnitude of force generation can be controlled by modulating the trailing edge flexibility and thereby controlling the magnitude of the leading edge vorticity. To characterize this, we have generated a detailed database of aerodynamic forces as a function of several variables including material properties, kinematics, aerodynamic forces and centre of pressure, which can also be used to help validate computational models of aeroelastic flapping wings. These experiments will also be useful for wing design for small

  10. Imaging pelvic floor disorders. 2. rev. ed.

    International Nuclear Information System (INIS)

    Stoker, Jaap; Taylor, Stuart A.; DeLancey, John O.L.

    2008-01-01

    This volume builds on the success of the first edition of imaging pelvic floor disorders and is aimed at those practitioners with an interest in the imaging, diagnosis and treatment of pelvic floor dysfunction. Concise textual information from acknowledged experts is complemented by high-quality diagrams and images to provide a thorough update of this rapidly evolving field. Introductory chapters fully elucidate the anatomical basis underlying disorders of the pelvic floor. State of the art imaging techniques and their application in pelvic floor dysfunction are then discussed in detail. Additions since the first edition include consideration of the effect of aging and new chapters on perineal ultrasound, functional MRI and MRI of the levator muscles. The closing sections of the book describe the modern clinical management of pelvic floor dysfunction, including prolapse, urinary and faecal incontinence and constipation, with specific emphasis on the integration of diagnostic and treatment algorithms. (orig.)

  11. Imaging pelvic floor disorders. 2. rev. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Stoker, Jaap [Amsterdam Univ. (Netherlands). Dept. of Radiology; Taylor, Stuart A. [University College Hospital, London (United Kingdom). Dept. of Specialist X-Ray; DeLancey, John O.L. (eds.) [Michigan Univ., Ann Arbor, MI (United States). L4000 Women' s Hospital

    2008-07-01

    This volume builds on the success of the first edition of imaging pelvic floor disorders and is aimed at those practitioners with an interest in the imaging, diagnosis and treatment of pelvic floor dysfunction. Concise textual information from acknowledged experts is complemented by high-quality diagrams and images to provide a thorough update of this rapidly evolving field. Introductory chapters fully elucidate the anatomical basis underlying disorders of the pelvic floor. State of the art imaging techniques and their application in pelvic floor dysfunction are then discussed in detail. Additions since the first edition include consideration of the effect of aging and new chapters on perineal ultrasound, functional MRI and MRI of the levator muscles. The closing sections of the book describe the modern clinical management of pelvic floor dysfunction, including prolapse, urinary and faecal incontinence and constipation, with specific emphasis on the integration of diagnostic and treatment algorithms. (orig.)

  12. Effects of wing locations on wing rock induced by forebody vortices

    Directory of Open Access Journals (Sweden)

    Ma Baofeng

    2016-10-01

    Full Text Available Previous studies have shown that asymmetric vortex wakes over slender bodies exhibit a multi-vortex structure with an alternate arrangement along a body axis at high angle of attack. In this investigation, the effects of wing locations along a body axis on wing rock induced by forebody vortices was studied experimentally at a subcritical Reynolds number based on a body diameter. An artificial perturbation was added onto the nose tip to fix the orientations of forebody vortices. Particle image velocimetry was used to identify flow patterns of forebody vortices in static situations, and time histories of wing rock were obtained using a free-to-roll rig. The results show that the wing locations can affect significantly the motion patterns of wing rock owing to the variation of multi-vortex patterns of forebody vortices. As the wing locations make the forebody vortices a two-vortex pattern, the wing body exhibits regularly divergence and fixed-point motion with azimuthal variations of the tip perturbation. If a three-vortex pattern exists over the wing, however, the wing-rock patterns depend on the impact of the highest vortex and newborn vortex. As the three vortices together influence the wing flow, wing-rock patterns exhibit regularly fixed-points and limit-cycled oscillations. With the wing moving backwards, the newborn vortex becomes stronger, and wing-rock patterns become fixed-points, chaotic oscillations, and limit-cycled oscillations. With further backward movement of wings, the vortices are far away from the upper surface of wings, and the motions exhibit divergence, limit-cycled oscillations and fixed-points. For the rearmost location of the wing, the wing body exhibits stochastic oscillations and fixed-points.

  13. Artificial insect wings of diverse morphology for flapping-wing micro air vehicles

    International Nuclear Information System (INIS)

    Shang, J K; Finio, B M; Wood, R J; Combes, S A

    2009-01-01

    The development of flapping-wing micro air vehicles (MAVs) demands a systematic exploration of the available design space to identify ways in which the unsteady mechanisms governing flapping-wing flight can best be utilized for producing optimal thrust or maneuverability. Mimicking the wing kinematics of biological flight requires examining the potential effects of wing morphology on flight performance, as wings may be specially adapted for flapping flight. For example, insect wings passively deform during flight, leading to instantaneous and potentially unpredictable changes in aerodynamic behavior. Previous studies have postulated various explanations for insect wing complexity, but there lacks a systematic approach for experimentally examining the functional significance of components of wing morphology, and for determining whether or not natural design principles can or should be used for MAVs. In this work, a novel fabrication process to create centimeter-scale wings of great complexity is introduced; via this process, a wing can be fabricated with a large range of desired mechanical and geometric characteristics. We demonstrate the versatility of the process through the creation of planar, insect-like wings with biomimetic venation patterns that approximate the mechanical properties of their natural counterparts under static loads. This process will provide a platform for studies investigating the effects of wing morphology on flight dynamics, which may lead to the design of highly maneuverable and efficient MAVs and insight into the functional morphology of natural wings.

  14. Rapid geomagnetic field intensity variations in the Near East during the 6th millennium BC: New archeointensity data from Halafian site Yarim Tepe II (Northern Iraq)

    Science.gov (United States)

    Yutsis-Akimova, Stanislava; Gallet, Yves; Amirov, Shahmardan

    2018-01-01

    We present new archeointensity results from a series of groups of pottery fragments that were collected from the multi-layered archeological site Yarim Tepe II in Northern Iraq (Northern Mesopotamia) dated to the 6th millennium BC. This site comprises a 7-m-thick sequence of archeological deposits encompassing the Middle Halaf, Late Halaf and the Halaf-Ubaid Transitional (HUT), between ∼5750 and ∼5000 BC according to the chronology currently considered for the Halafian archeological period. Three new radiocarbon dates obtained from bone fragments confirm that Yarim Tepe II was likely not occupied before the Middle Halaf, as was independently established from archeological constraints. Archeointensity determinations were carried out using the protocol developed for the Triaxe magnetometer. This procedure takes into account thermoremanent magnetization anisotropy and cooling rate effects. 114 fragments fulfilled our set of archeointensity selection criteria, with intensity data obtained from at least two but most often three specimens per fragment. Mean archeointensity values were estimated for 23 groups of fragments well distributed across the entire stratigraphic sequence from the averaging of the data obtained from a minimum of three fragments per group. These values were dated using a bootstrap procedure relying on the stratigraphic position of the different groups of fragments and on the different age constraints available inside the Yarim Tepe II sequence. The new data show a significant decrease in geomagnetic field intensity by ∼12 μT between the Middle Halaf and the Late Halaf-HUT time interval. This decrease was accompanied by a short intensity peak, which may have lasted only a few decades, around the Middle Halaf-Late Halaf boundary, at ∼5500 BC. This evolution is quite similar to that observed from Syrian and Bulgarian archeointensity data, even though the precise duration of the intensity peak is presently questionable. The Bulgarian data set

  15. Early fetal gender determination using real-time PCR analysis of cell-free fetal DNA during 6th-10th weeks of gestation.

    Science.gov (United States)

    Khorram Khorshid, Hamid Reza; Zargari, Maryam; Sadeghi, Mohammad Reza; Edallatkhah, Haleh; Shahhosseiny, Mohammad Hassan; Kamali, Koorosh

    2013-05-07

    Nowadays, new advances in the use of cell free fetal DNA (cffDNA) in maternal plasma of pregnant women has provided the possibility of applying cffDNA in prenatal diagnosis as a non-invasive method. In contrary to the risks of invasive methods that affect both mother and fetus, applying cffDNA is proven to be highly effective with lower risk. One of the applications of prenatal diagnosis is fetal gender determination, which is important in fetuses at risk of sex-linked genetic diseases. In such cases by obtaining the basic information of the gender, necessary time management can be taken in therapeutic to significantly reduce the necessity of applying the invasive methods. Therefore in this study, the probability of detecting sequences on the human Y-chromosome in pregnant women has been evaluated to identify the gender of fetuses. Peripheral blood samples were obtained from 80 pregnant women with gestational age between 6th to 10th weeks and the fetal DNA was extracted from the plasma. Identification of SRY, DYS14 & DAZ sequences, which are not presentin the maternal genome, was performed using Real-Time PCR. All the obtained results were compared with the actual gender of the newborns to calculate the test accuracy. Considerable 97.3% sensitivity and 97.3% specificity were obtained in fetal gender determination which is significant in the first trimester of pregnancy. Only in one case, false positive result was obtained. Using non-invasive method of cffDNAs in the shortest time possible, as well as avoiding invasive tests for early determination of fetal gender, provides the opportunity of deciding and employing early treatment for fetuses at risk of genetic diseases.

  16. Engaging 5th/6th Graders in Representations of Change Over Time in the Context of Adaptations to Climate Change in the Gulf of Maine

    Science.gov (United States)

    Peake, L.; Young Morse, R.

    2017-12-01

    Since 2005, the Gulf of Maine Research Institute has brought 70% of Maine's 5th/6th grade cohort annually to our marine research lab for a 2.5-hour exploration of ecosystem complexity. Using a digital platform, tools of science, and live marine species, students consider the interconnections among key Gulf of Maine species while experiencing the process of authentic marine research. With funding from NASA, we are renovating the program's learning content, underlying technology, and physical interfaces to leverage NASA data sets. The new experience will emphasize development of students' data skills as they investigate the impacts of climate change in the Gulf of Maine. To do this, students will explore representations of rising ocean temperatures and connect that to representations of changes in the populations of key species like lobster and black sea bass. Past experience suggests the abstraction and synthesis required to make meaning from data visualizations is extremely challenging for this age student. We will report on an early round of informal testing with 250+ students to understand their ability to extract meaning from geospatial and graphical representations of change over time. We will also report on experiments that will be conducted in Fall 2017 to understand the kinds of informal learning experiences, and the sequences of data representations, that best support growth in students' ability to interpret a range of representations. Finally, we will discuss the project's work to extend the learning experiences 1) back into the classroom, including through citizen science; and 2) out to regional science centers for adaptation to investigations of local climate impacts.

  17. Women’s Costume of German Origin in the Funeral Context of Early Byzantine Cities of the Northern Black Sea (5th–6th Centuries

    Directory of Open Access Journals (Sweden)

    Anna V. Mastykova

    2017-11-01

    Full Text Available This work is devoted to burials containing elements of a female costume of East German origin, discovered in the urban necropolises of Chersonesus and Cimmerian Bosporus in the 5th–6th centuries. Burials with German objects are most often in the same collective tombs and in the same necropolises as the burial of the urban Hellenized population. The appearance and resettlement of the eastern Germans in the cities of the Northern Black Sea Coast is attested by written sources only for the Cimmerian Bosporus. About 400 Goths could even occupy a dominant position here. This explains their integration into the Bosporus ruling elite, as evidenced by the existence of rich graves with German implements in the tombs of the local nobility. Later, Cimmerian Bosporus is under the rule of the Huns, and in 534 the military expedition sent by Justinian returns the region to the power of the Empire. Written sources directly indicate the presence of Gothic federates from Minor Scythia as part of the Justinian assault. Therefore, the researchers explain the appearance of a new series of East German things in the Northern Black Sea region by the arrival here of the German soldiers with their families. On the other hand, the violent deportation of barbarians to the Crimea is also possible – a practice well known in the Justinian era. This is how you can explain the appearance here of Italo-Ostrogothic and Gepidic things. In Chersonese German things could fall and as a result of various contacts with the Goths from the country of Dori, in the South-Western Crimea. However, despite the various historical destinies and different statutes of the Germans, in the north-Pontic cities they sooner or later come to be absorbed by the local environment, which reflects the finds of the items of female clothing in urban necropolises.

  18. Animal Board Invited Review: Sheep birth distribution in past herds: a review for prehistoric Europe (6th to 3rd millennia BC).

    Science.gov (United States)

    Balasse, M; Tresset, A; Bălăşescu, A; Blaise, E; Tornero, C; Gandois, H; Fiorillo, D; Nyerges, É Á; Frémondeau, D; Banffy, E; Ivanova, M

    2017-12-01

    In temperate latitudes sheep have a seasonal reproductive behaviour, which imposes strong constraints on husbandry in terms of work organization and availability of animal products. During the last 50 years, researchers have focused on understanding the mechanisms driving small ruminants' reproduction cycles and finding ways to control them. This characteristic is inherited from their wild ancestor. However, the history of its evolution over the 10 millennia that separates present day European sheep from their Near Eastern ancestors' remains to be written. This perspective echoes archaeologists' current attempts at reconstructing ancient pastoral societies' socio-economical organization. Information related to birth seasonality may be retrieved directly from archaeological sheep teeth. The methodology consists of reconstructing the seasonal cycle record in sheep molars, through sequential analysis of the stable oxygen isotope composition (δ 18O) of enamel. Because the timing of tooth development is fixed within a species, inter-individual variability in this parameter reflects birth seasonality. A review of the data obtained from 10 European archaeological sites dated from the 6th to the 3rd millennia BC is provided. The results demonstrate a restricted breeding season for sheep: births occurred over a period of 3 to 4 months, from late winter to early summer at latitudes 43°N to 48°N, while a later onset was observed at a higher latitude (59°N). All conclusions concurred with currently held expectations based on present day sheep physiology, which, aside from the historical significance, contributes to the reinforcing of the methodological basis of the approach. Further study in this area will permit regional variability attributable to technical choices, within global schemes, to be fully reported.

  19. The costae presenting in high-temperature-induced vestigial wings ...

    Indian Academy of Sciences (India)

    Most of the wings have defects in the wing blade and partially formed wing margin, which are the result of autonomous cell death in the ... [Yang D. 2007 The costae presenting in high-temperature-induced vestigial wings of Drosophila: implications for anterior wing margin formation. J. Genet. .... The relevant gene(s) may be.

  20. Role of wing morphing in thrust generation

    Directory of Open Access Journals (Sweden)

    Mehdi Ghommem

    2014-01-01

    Full Text Available In this paper, we investigate the role of morphing on flight dynamics of two birds by simulating the flow over rigid and morphing wings that have the characteristics of two different birds, namely the Giant Petrel and Dove Prion. The simulation of a flapping rigid wing shows that the root of the wing should be placed at a specific angle of attack in order to generate enough lift to balance the weight of the bird. However, in this case the generated thrust is either very small, or even negative, depending on the wing shape. Further, results show that morphing of the wing enables a significant increase in the thrust and propulsive efficiency. This indicates that the birds actually utilize some sort of active wing twisting and bending to produce enough thrust. This study should facilitate better guidance for the design of flapping air vehicles.

  1. Pegasus Rocket Wing and PHYSX Glove Undergoes Stress Loads Testing

    Science.gov (United States)

    1997-01-01

    The Pegasus Hypersonic Experiment (PHYSX) Project's Pegasus rocket wing with attached PHYSX glove rests after load-tests at Scaled Composites, Inc., in Mojave, California, in January 1997. Technicians slowly filled water bags beneath the wing, to create the pressure, or 'wing-loading,' required to determine whether the wing could withstand its design limit for stress. The wing sits in a wooden triangular frame which serves as the test-rig, mounted to the floor atop the waterbags. Pegasus is an air-launched space booster produced by Orbital Sciences Corporation and Hercules Aerospace Company (initially; later, Alliant Tech Systems) to provide small satellite users with a cost-effective, flexible, and reliable method for placing payloads into low earth orbit. Pegasus has been used to launch a number of satellites and the PHYSX experiment. That experiment consisted of a smooth glove installed on the first-stage delta wing of the Pegasus. The glove was used to gather data at speeds of up to Mach 8 and at altitudes approaching 200,000 feet. The flight took place on October 22, 1998. The PHYSX experiment focused on determining where boundary-layer transition occurs on the glove and on identifying the flow mechanism causing transition over the glove. Data from this flight-research effort included temperature, heat transfer, pressure measurements, airflow, and trajectory reconstruction. Hypersonic flight-research programs are an approach to validate design methods for hypersonic vehicles (those that fly more than five times the speed of sound, or Mach 5). Dryden Flight Research Center, Edwards, California, provided overall management of the glove experiment, glove design, and buildup. Dryden also was responsible for conducting the flight tests. Langley Research Center, Hampton, Virginia, was responsible for the design of the aerodynamic glove as well as development of sensor and instrumentation systems for the glove. Other participating NASA centers included Ames Research

  2. Testing of the Anorectal and Pelvic Floor Area

    Science.gov (United States)

    ... Large Intestine Disorders of the Pelvic Floor Motility Testing Personal Stories Contact About GI Motility Twitter Facebook ... Large Intestine Disorders of the Pelvic Floor Motility Testing Personal Stories Contact Anorectal and Pelvic Floor Area ...

  3. Pelvic floor and sexual male dysfunction

    Directory of Open Access Journals (Sweden)

    Antonella Pischedda

    2013-04-01

    Full Text Available The pelvic floor is a complex multifunctional structure that corresponds to the genito- urinary-anal area and consists of muscle and connective tissue. It supports the urinary, fecal, sexual and reproductive functions and pelvic statics. The symptoms caused by pelvic floor dysfunction often affect the quality of life of those who are afflicted, worsening significantly more aspects of daily life. In fact, in addition to providing support to the pelvic organs, the deep floor muscles support urinary continence and intestinal emptying whereas the superficial floor muscles are involved in the mechanism of erection and ejaculation. So, conditions of muscle hypotonia or hypertonicity may affect the efficiency of the pelvic floor, altering both the functionality of the deep and superficial floor muscles. In this evolution of knowledge it is possible imagine how the rehabilitation techniques of pelvic floor muscles, if altered and able to support a voiding or evacuative or sexual dysfunction, may have a role in improving the health and the quality of life.

  4. Analysis of bat wings for morphing

    Science.gov (United States)

    Leylek, Emily A.; Manzo, Justin E.; Garcia, Ephrahim

    2008-03-01

    The morphing of wings from three different bat species is studied using an extension of the Weissinger method. To understand how camber affects performance factors such as lift and lift to drag ratio, XFOIL is used to study thin (3% thickness to chord ratio) airfoils at a low Reynolds number of 100,000. The maximum camber of 9% yielded the largest lift coefficient, and a mid-range camber of 7% yielded the largest lift to drag ratio. Correlations between bat wing morphology and flight characteristics are covered, and the three bat wing planforms chosen represent various combinations of morphological components and different flight modes. The wings are studied using the extended Weissinger method in an "unmorphed" configuration using a thin, symmetric airfoil across the span of the wing through angles of attack of 0°-15°. The wings are then run in the Weissinger method at angles of attack of -2° to 12° in a "morphed" configuration modeled after bat wings seen in flight, where the camber of the airfoils comprising the wings is varied along the span and a twist distribution along the span is introduced. The morphed wing configurations increase the lift coefficient over 1000% from the unmorphed configuration and increase the lift to drag ratio over 175%. The results of the three different species correlate well with their flight in nature.

  5. Veins improve fracture toughness of insect wings.

    Directory of Open Access Journals (Sweden)

    Jan-Henning Dirks

    Full Text Available During the lifetime of a flying insect, its wings are subjected to mechanical forces and deformations for millions of cycles. Defects in the micrometre thin membranes or veins may reduce the insect's flight performance. How do insects prevent crack related material failure in their wings and what role does the characteristic vein pattern play? Fracture toughness is a parameter, which characterises a material's resistance to crack propagation. Our results show that, compared to other body parts, the hind wing membrane of the migratory locust S. gregaria itself is not exceptionally tough (1.04±0.25 MPa√m. However, the cross veins increase the wing's toughness by 50% by acting as barriers to crack propagation. Using fracture mechanics, we show that the morphological spacing of most wing veins matches the critical crack length of the material (1132 µm. This finding directly demonstrates how the biomechanical properties and the morphology of locust wings are functionally correlated in locusts, providing a mechanically 'optimal' solution with high toughness and low weight. The vein pattern found in insect wings thus might inspire the design of more durable and lightweight artificial 'venous' wings for micro-air-vehicles. Using the vein spacing as indicator, our approach might also provide a basis to estimate the wing properties of endangered or extinct insect species.

  6. Quad-thopter: Tailless Flapping Wing Robot with 4 Pairs of Wings

    NARCIS (Netherlands)

    de Wagter, C.; Karasek, M.; de Croon, G.C.H.E.; J.-M. Moschetta G. Hattenberger, H. de Plinval

    2017-01-01

    We present a novel design of a tailless flapping wing Micro Air Vehicle (MAV), which uses four independently driven pairs of flapping wings in order to fly and perform agile maneuvers. The wing pairs are arranged such that differential thrust generates the desired roll and pitch moments, similar to

  7. Anatomy and Physiology of the Pelvic Floor.

    Science.gov (United States)

    Eickmeyer, Sarah M

    2017-08-01

    Understanding the anatomic relationship of the pelvic floor muscles with the pelvic girdle, spine, and hips aids the rehabilitation provider in diagnosis, management, and appropriate referrals. The bony anatomy of the pelvic girdle consists of 3 bones and 3 joints. The pelvic floor muscles are comprised mainly of the levator ani muscles with somatic innervation from the lumbosacral plexus. The bony and muscular pelvis is highly interconnected to the hip and gluteal musculature, which together provide support to the internal organs and core muscles. Pelvic floor physiology is centered on bladder and bowel control, sexual functioning, and pregnancy. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Ultrasound Imaging of the Pelvic Floor.

    Science.gov (United States)

    Stone, Daniel E; Quiroz, Lieschen H

    2016-03-01

    This article discusses the background and appraisal of endoluminal ultrasound of the pelvic floor. It provides a detailed anatomic assessment of the muscles and surrounding organs of the pelvic floor. Different anatomic variability and pathology, such as prolapse, fecal incontinence, urinary incontinence, vaginal wall cysts, synthetic implanted material, and pelvic pain, are easily assessed with endoluminal vaginal ultrasound. With pelvic organ prolapse in particular, not only is the prolapse itself seen but the underlying cause related to the anatomic and functional abnormalities of the pelvic floor muscle structures are also visualized. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Multiple strategies for quality improvement and patient safety-money alone is not the answer, nor is trust. Conclusions of the 6th EQuiP Invitational conference April 2011

    NARCIS (Netherlands)

    Campbell, S.M.; Eriksson, T.

    2011-01-01

    Abstract On 7-9 April 2011 the 6th EQuiP Invitational Conference took place in Copenhagen. Key note lectures were delivered by Professor Frede Olesen (Denmark), Professor Andreas Christian Soennichsen (Austria), Professor Martin Roland (UK) and Professor Richard Roberts (US), and a key note panel

  10. EDITORIAL: The 6th International Workshop on Micro and Nanotechnologies for Power Generation and Energy Conversion Applications (PowerMEMS 2006)

    Science.gov (United States)

    Fréchette, Luc G.

    2007-09-01

    Energy is a sector of paramount importance over the coming decades if we are to ensure sustainable development that respects our environment. The research and development of novel approaches to convert available energy into usable forms using micro and nanotechnologies can contribute towards this goal and meet the growing need for power in small scale portable applications. The dominant power sources for handheld and other portable electronics are currently primary and rechargeable batteries. Their limited energy density and adverse effects on the environment upon disposal suggest that alternative approaches need to be explored. This special issue will showcase some of the leading work in this area, initially presented at PowerMEMS 2006, the 6th International Workshop on Micro and Nanotechnologies for Power Generation and Energy Conversion Applications. Power MEMS are defined as microsystems for electrical power generation and other energy conversion applications, including propulsion and cooling. The range of power MEMS technologies includes micro thermodynamic machines, such as microturbines, miniature internal combustion engines and micro-coolers; solid-state direct energy conversion, such as thermoelectric and photovoltaic microstructures; micro electrochemical devices, such as micro fuel cells and nanostructure batteries; vibration energy harvesting devices, such as piezoelectric, magnetic or electrostatic micro generators, as well as micro thrusters and rocket engines for propulsion. These can either be driven by scavenging thermal, mechanical or solar energy from the environment, or from a stored energy source, such as chemical fuel or radioactive material. The unique scope leads to unique challenges in the development of power MEMS, ranging from the integration of novel materials to the efficient small scale implementation of energy conversion principles. In this special issue, Mitcheson et al provide a comparative assessment of three inertial vibration

  11. Implementation of the obligations of the Convention on Nuclear Safety - 6th national report of Switzerland to the Convention in accordance with its article 5

    International Nuclear Information System (INIS)

    2013-08-01

    After a short description of Switzerland as a state in the middle of Europe and of its political organization, the report explains the development of the nuclear power from the first experimental reactor in 1957. Presently five nuclear power plants (NPP) are operating in Switzerland, producing about 40% of the electricity consumption of the country, the rest being produced essentially by hydroelectric plants. As the first regulatory authority, the Swiss Federal Nuclear Safety Commission was set up in 1960, which evolved to the Swiss Nuclear Safety Inspectorate (ENSI). Switzerland signed the Convention on Nuclear Safety (CNS) which came into force at the end of 1996. Since there, Switzerland has prepared and submitted the country reports for the regular Review Meetings of Contracting Countries. This 6th report by ENSI provides an update on compliance with CNS obligations. It gives consideration to issues that aroused particular interest at the 5th meeting and at the extraordinary meeting dedicated to the consequences of the accident at Fukushima Daiichi. Shortly after the accident at Fukushima Daiichi, the Swiss government has decided to phase out nuclear energy; existing plants will continue to operate as long as they are safe. In Switzerland, on-going activities regarding safety assessment of the different stages in the lifetime of nuclear installations consist of periodic assessments and assessments of long-term operation for existing Swiss NPPs. Such assessments have been performed for two Swiss NPPs (Beznau NPP and Muehleberg NPP) which have been in commercial operation for over 40 years. A detailed examination demonstrated that the conditions for the taking out of service of an NPP are not and will not be reached by these two plants within the next 10 years. Nevertheless, it is mandatory to continue with the scheduled ageing management, maintenance and backfitting activities. After the Fukushima accident, additional safety reviews were performed. All Swiss

  12. Emergency Preparedness and Management at the University of L'aquila (Central Italy) and the Role of Students' Associations in the April 6th 2009 Earthquake.

    Science.gov (United States)

    Magni, Michele; Fraboni, Rita; Marincioni, Fausto

    2017-01-12

    On April 6th 2009 an earthquake of Mw=6.3 hit the historical downtown of L'Aquila and its hinterland causing more than 300 fatalities and severe damage to private and public buildings. At the time, the University of L'Aquila represented a major source of employment and income for the city. The earthquake impacted both the facilities and the administrative, financial and patrimonial activities of the university, bringing into the open the tendency - widespread in Italy - to rely on adaptive tactics rather than on strategic pre-disaster plans. This paper investigates the university's emergency preparedness and response capability and  the strategies adopted to restore the education activities as well as avoid students migration to other universities. In addition, emphasis is placed on the role played by Student Associations in pre and post-disaster phases, and how students perceived the activities performed by these associations. To achieve this goal, it was undertaken: i) qualitative evaluation to assess the impact of earthquake on services and facilities of the university, the emergency preparedness and the measures adopted to face the emergency, ii) survey on the role played by Student Associations, both in emergency preparedness and response, according to students' perception; iii) quantitative analysis to measure changes in the enrollment trend after the earthquake, and how university policies could curb students' migration. The policies adopted by the University allowed to diminish students' migration; however, the measures taken by the university were based on an ad hoc plan as no emergency and continuity plans were prepared in advance. Similarly Student Associations got involved more in restoration activities than in emergency preparedness and risk awareness promotion. Greater awareness and involvement are essential at each level (administrators, faculties, students) to plan in advance for an adverse scenario and to make important steps forward in

  13. Combined PET/MRI: Global Warming-Summary Report of the 6th International Workshop on PET/MRI, March 27-29, 2017, Tübingen, Germany.

    Science.gov (United States)

    Bailey, D L; Pichler, B J; Gückel, B; Antoch, G; Barthel, H; Bhujwalla, Z M; Biskup, S; Biswal, S; Bitzer, M; Boellaard, R; Braren, R F; Brendle, C; Brindle, K; Chiti, A; la Fougère, C; Gillies, R; Goh, V; Goyen, M; Hacker, M; Heukamp, L; Knudsen, G M; Krackhardt, A M; Law, I; Morris, J C; Nikolaou, K; Nuyts, J; Ordonez, A A; Pantel, K; Quick, H H; Riklund, K; Sabri, O; Sattler, B; Troost, E G C; Zaiss, M; Zender, L; Beyer, Thomas

    2018-02-01

    The 6th annual meeting to address key issues in positron emission tomography (PET)/magnetic resonance imaging (MRI) was held again in Tübingen, Germany, from March 27 to 29, 2017. Over three days of invited plenary lectures, round table discussions and dialogue board deliberations, participants critically assessed the current state of PET/MRI, both clinically and as a research tool, and attempted to chart future directions. The meeting addressed the use of PET/MRI and workflows in oncology, neurosciences, infection, inflammation and chronic pain syndromes, as well as deeper discussions about how best to characterise the tumour microenvironment, optimise the complementary information available from PET and MRI, and how advanced data mining and bioinformatics, as well as information from liquid biomarkers (circulating tumour cells and nucleic acids) and pathology, can be integrated to give a more complete characterisation of disease phenotype. Some issues that have dominated previous meetings, such as the accuracy of MR-based attenuation correction (AC) of the PET scan, were finally put to rest as having been adequately addressed for the majority of clinical situations. Likewise, the ability to standardise PET systems for use in multicentre trials was confirmed, thus removing a perceived barrier to larger clinical imaging trials. The meeting openly questioned whether PET/MRI should, in all cases, be used as a whole-body imaging modality or whether in many circumstances it would best be employed to give an in-depth study of previously identified disease in a single organ or region. The meeting concluded that there is still much work to be done in the integration of data from different fields and in developing a common language for all stakeholders involved. In addition, the participants advocated joint training and education for individuals who engage in routine PET/MRI. It was agreed that PET/MRI can enhance our understanding of normal and disrupted biology, and we

  14. Crash tests of three identical low-wing single-engine airplane

    Science.gov (United States)

    Castle, C. B.; Alfaro-Bou, E.

    1983-01-01

    Three identical four place, low wing single engine airplane specimens with nominal masses of 1043 kg were crash tested under controlled free flight conditions. The tests were conducted at the same nominal velocity of 25 m/sec along the flight path. Two airplanes were crashed on a concrete surface (at 10 and 30 deg pitch angles), and one was crashed on soil (at a -30 deg pitch angle). The three tests revealed that the specimen in the -30 deg test on soil sustained massive structural damage in the engine compartment and fire wall. Also, the highest longitudinal cabin floor accelerations occurred in this test. Severe damage, but of lesser magnitude, occurred in the -30 deg test on concrete. The highest normal cabin floor accelerations occurred in this test. The least structural damage and lowest accelerations occurred in the 10 deg test on concrete.

  15. Adaptive wing : Investigations of passive wing technologies for loads reduction in the cleansky smart fixed wing aircraft (SFWA) project

    NARCIS (Netherlands)

    Kruger, W.R.; Dillinger, J; De Breuker, R.; Reyes, M.; Haydn, K.

    2016-01-01

    In the work package “Adaptive Wing” in the Clean-Sky “Smart Fixed Wing Aircraft” (SFWA) project, design processes and solutions for aircraft wings have been created, giving optimal response with respect to loads, comfort and performance by the introduction of passive and active concepts. Central

  16. Biomechanics of the pelvic floor musculature

    OpenAIRE

    Janda, S.

    2006-01-01

    The present thesis was motivated by two main goals. The first research goal of the thesis was to understand the complex biomechanical behaviour of the pelvic floor muscles. The second goal was to study the mechanism of the pelvic organ prolapse (genital prolapse). The pelvic floor in humans is a very complex muscular structure. It is largely responsible for supporting both pelvic and abdominal organs and acts synergistically with the striated muscle of the anterior abdominal wall to generate ...

  17. Anonymous electronic trading versus floor trading

    OpenAIRE

    Franke, Günter; Hess, Dieter

    1995-01-01

    This paper compares the attractiveness of floor trading and anonymous electronic trading systems. It is argued that in times of low information intensity the insight into the order book of the electronic trading system provides more valuable information than floor trading, but in times of high information intensity the reverse is true. Thus, the electronic system's market share in trading activity should decline in times of high information intensity. This hypothesis is tested by data on BUND...

  18. The Realization and Study of Optical Wings

    Science.gov (United States)

    Artusio-Glimpse, Alexandra Brae

    Consider the airfoil: a carefully designed structure capable of stable lift in a uniform air flow. It so happens that air pressure and radiation (light) pressure are similar phenomena because each transfer momentum to flow-disturbing objects. This, then, begs the question: does an optical analogue to the airfoil exist? Though an exceedingly small effect, scientists harness radiation pressure in a wide gamut of applications from micromanipulation of single biological particles to the propulsion of large spacecrafts called solar sails. We introduce a cambered, refractive rod that is subjected to optical forces analogous to those seen in aerodynamics, and I call this analogue the optical wing. Flight characteristics of optical wings are determined by wing shape and material in a uniform radiation field. Theory predicts the lift force and axial torque are functions of the wing's angle of attack with stable and unstable orientations. These structures can operate as intensity-dependent, parametrically driven oscillators. In two-dimensions, the wings exhibit bistability when analyzed in an accelerating frame. In three-dimensions, the motion of axially symmetric spinning hemispherical wings is analogous to a spinning top. Experiments on semi-buoyant wings in water found semicylindrically shaped, refractive microparticles traversed a laser beam and rotated to an illumination-dependent stable orientation. Preliminary tests aid in the development of a calibrated force measurement experiment to directly evaluate the optical forces and torque on these samples. A foundational study of the optical wing, this work contributes to future advancements of flight-by-light.

  19. The Crest Wing Wave Energy Device

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Antonishen, Michael Patrick

    This report presents the results of a continuation of an experimental study of the wave energy converting abilities of the Crest Wing wave energy converter (WEC), in the following referred to as ‘Phase 2'. The Crest Wing is a WEC that uses its movement in matching the shape of an oncoming wave...

  20. Veins Improve Fracture Toughness of Insect Wings

    Science.gov (United States)

    Dirks, Jan-Henning; Taylor, David

    2012-01-01

    During the lifetime of a flying insect, its wings are subjected to mechanical forces and deformations for millions of cycles. Defects in the micrometre thin membranes or veins may reduce the insect’s flight performance. How do insects prevent crack related material failure in their wings and what role does the characteristic vein pattern play? Fracture toughness is a parameter, which characterises a material’s resistance to crack propagation. Our results show that, compared to other body parts, the hind wing membrane of the migratory locust S. gregaria itself is not exceptionally tough (1.04±0.25 MPa√m). However, the cross veins increase the wing’s toughness by 50% by acting as barriers to crack propagation. Using fracture mechanics, we show that the morphological spacing of most wing veins matches the critical crack length of the material (1132 µm). This finding directly demonstrates how the biomechanical properties and the morphology of locust wings are functionally correlated in locusts, providing a mechanically ‘optimal’ solution with high toughness and low weight. The vein pattern found in insect wings thus might inspire the design of more durable and lightweight artificial ‘venous’ wings for micro-air-vehicles. Using the vein spacing as indicator, our approach might also provide a basis to estimate the wing properties of endangered or extinct insect species. PMID:22927966

  1. Effect of leading edge roundness on a delta wing in wing-rock motion

    Science.gov (United States)

    Ng, T. Terry; Malcolm, Gerald N.

    1990-01-01

    The effect of wing leading-edge roundness on wing rock was investigated using flow visualization in a water tunnel. Eighty degree delta wing models were tested on free-to-roll and forced oscillation rigs. The onset of wing rock was delayed by increasing the roundness of the leading edges. The wing rock amplitude and frequency results suggested that damping was increased at lower angles of attack but reduced at higher angles of attack. Vortex lift-off and vortex breakdown, especially during dynamic situations, were strongly affected by the leading edge roundness. Different forms of wing rock motion could be sustained by combinations of vortex breakdown and vortex lift-off. Behaviors of the wing and vortex motions were explained by the influence of leading edge roundness on the separation location, vortex trajectory, and vortex breakdown.

  2. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Outcomes of prematurity”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Outcomes of prematurity”ABS 1. CHILDHOOD NEURODEVELOPMENTAL OUTCOME IN LOW BIRTH WEIGHT INFANTS WITH POSTLIGATION CARDIAC SYNDROME AFTER DUCTUS ARTERIOSUS CLOSURE: 5-YEAR FOLLOW-UP • M.C. Bravo, M. Ybarra, R. Madero, A. PellicerABS 2. PARENT CARE TAGS: ENGAGING PARENTS IN CARE ON THE NEONATAL UNIT • R. Homer, L. RattenburyABS 3. STRESS BIOMARKERS AND PSYCHOSOCIAL FACTORS AS PREMATURITY PREDICTORS IN THREATENED PRETERM LABOR • A.C. García-Blanco, M. Vento, P. Sáenz, V. Diago, C. Cháfer-PericásABS 4. PREDICTION OF WEEK OF CHILDBIRTH FOR WOMEN WITH THREATENED PRETERM LABOR • C. Cháfer-Pericás, M. Vento1, V. Diago, V. Serrano-De la Cruz, D. Hervás, A. García-BlancoABS 5. DELIVERY ROOM CARDIOPULMONARY RESUSCITATION (CPR AT THE LIMIT OF VIABILITY • S. Zeballos Sarrato, S. Villar, I. Pescador, M. Carrón, A. Rodriguez, M. Sánchez LunaABS 6. QUALITY OF LIFE IN PREMATURE BABIES FROM MOTHER’S PERSPECTIVE • A. Bivoleanu, A. Avasiloaiei, M. StamatinABS 7. PERINATAL MANAGEMENT AND MORTALITY RATES AT THE LIMIT OF VIABILITY • S. Zeballos Sarrato, E. Sanz, I. Pescador, S. Villar, N. Navarro, M. Sánchez LunaABS 8. OUTCOMES OF LATE PRETERM NEWBORNS • D. Stoniene, J. Ribeliene, S. Malik, J. Tomkeviciute, R. TamelieneABS 9. MAGNESIUM SULPHATE, ANTENATAL STEROIDS, CORD CLAMPING, THERMOREGULATION (MASCOT • A. Ansary, D. AnandABS 10. FOLLOW-UP AT AGE 8 YEARS OF A POST-DISCHARGE NUTRITION RCT IN PRETERM INFANTS • C.A. Ruys, H.N. LafeberABS 11. NEONATAL OUTCOMES OF PRETERM BABIES (23-32 WEEKS GESTATION CLASSIFIED BY THE UNDERLYING AETIOLOGIES: A RETROSPECTIVE STUDY IN A SPECIALISED NEONATAL UNIT • F. Jaffar, S. Sankaran, S. Tan, A. ShennanABS 12. ARE THERE PREDICTIVE PARAMETERS FOR THE OCCURRENCE OF RETINOPATHY OF PREMATURITY – ROP? • V. Filip, C. LazarABS 13. POSTNATAL GROWTH OF PRETERM CHILDREN

  3. Aspectos temporais auditivos em adolescentes do 6º ano do ensino fundamental Temporal aspects of hearing in adolescents from the 6th year of elementary education

    Directory of Open Access Journals (Sweden)

    Sulamita da Silva Marcelino Terto

    2013-04-01

    Full Text Available OBJETIVO: esclarecer a relação entre desempenho escolar e aspectos temporais auditivos. MÉTODO: estudo descritivo-transversal com amostra de conveniência, composta por 82 estudantes, na faixa etária de 11 a 13 anos, sendo 43 do sexo feminino e 38 do sexo masculino do 6º ano de uma escola de financiamento privado na Região Metropolitana de Belo Horizonte. Cada estudante respondeu a um formulário de caracterização da amostra, realizou o Teste de Desempenho Escolar e foi submetido aos testes que avaliam os aspectos temporais auditivos: Teste Padrão de Duração, Teste Padrão de Frequência e Teste Gap-in-Noise. RESULTADOS: os testes que avaliam os aspectos temporais auditivos não sofreram influência relacionada às variáveis sexo, idade, realização de atividades de musicalização e preferência manual. Com exceção da variável "acompanhamento fonoaudiológico" que apresentou significância estatística no teste Gap-in-Noise. Os subtestes do Teste de Desempenho Escolar que exerceram maior influencia no desempenho nos testes Padrão de Duração e Padrão de Frequência foram Escrita, seguida de Leitura e Aritmética. CONCLUSÃO: a análise dos dados revelou que há correlação entre desempenho escolar e aspectos temporais auditivos. Cabe ressaltar que os testes que avaliam a ordenação temporal complexa (Teste Padrão de Frequência e Teste Padrão de Duração são influenciados pelo desempenho no Teste de Desempenho Escolar. Porém o mesmo não ocorre com o teste que avalia resolução temporal (Gap-in-Noise.PURPOSE: to elucidate the relationship between school performance and temporal aspects of hearing. METHOD: a descriptive cross-sectional convenience sample composed of 82 students, aged 11-13 years, 43 females, and 38 males in the 6th grade at a private funding school in the Metropolitan Region of Belo Horizonte. Each student responded to one form of sample characterization, performed the Academic Performance Test and was

  4. Aspectos temporais auditivos em adolescentes do 6º ano do Ensino Fundamental Temporal aspects of hearing in adolescents from the 6th year of elementary education

    Directory of Open Access Journals (Sweden)

    Sulamita da Silva Marcelino Terto

    2012-01-01

    Full Text Available OBJETIVO: esclarecer a relação entre desempenho escolar e aspectos temporais auditivos. MÉTODO: estudo descritivo-transversal com amostra de conveniência, composta por 82 estudantes, na faixa etária de 11 a 13 anos, sendo 43 do sexo feminino e 38 do sexo masculino do 6º ano de uma escola de financiamento privado na Região Metropolitana de Belo Horizonte. Cada estudante respondeu a um formulário de caracterização da amostra, realizou o Teste de Desempenho Escolar e foi submetido aos testes que avaliam os aspectos temporais auditivos: Teste Padrão de Duração, Teste Padrão de Frequência e Teste Gap-in-Noise. RESULTADOS: os testes que avaliam os aspectos temporais auditivos não sofreram influência relacionada às variáveis sexo, idade, realização de atividades de musicalização e preferência manual. Com exceção da variável "acompanhamento fonoaudiológico" que apresentou significância estatística no teste Gap-in-Noise. Os subtestes do Teste de Desempenho Escolar que exerceram maior influencia no desempenho nos testes Padrão de Duração e Padrão de Frequência foram Escrita, seguida de Leitura e Aritmética. CONCLUSÃO: a análise dos dados revelou que há correlação entre desempenho escolar e aspectos temporais auditivos. Cabe ressaltar que os testes que avaliam a ordenação temporal complexa (Teste Padrão de Frequência e Teste Padrão de Duração são influenciados pelo desempenho no Teste de Desempenho Escolar. Porém o mesmo não ocorre com o teste que avalia resolução temporal (Gap-in-Noise.PURPOSE: to elucidate the relationship between school performance and temporal aspects of hearing. METHOD: a descriptive cross-sectional convenience sample composed of 82 students, aged 11-13 years, 43 females, and 38 males in the 6th grade at a private funding school in the Metropolitan Region of Belo Horizonte. Each student responded to one form of sample characterization, performed the Academic Performance Test and was

  5. Some Passive Damping Sources on Flooring Systems besides the TMD

    DEFF Research Database (Denmark)

    Pedersen, Lars

    2010-01-01

    damping to the structure. Basically also passive humans on a floor act as a damping source, but it also turns out from doing system identification tests with a floor strip that a quite simple set-up installed on the floor (cheap and readily at hand) might do a good job in terms of reducing vertical floor...

  6. A novel & affordable interactive floor for educational applications

    DEFF Research Database (Denmark)

    Boisen, Ulrik; Hansen, Anders Juul; Knudsen, Lars

    2011-01-01

    This article examines two research areas: How interactive floors can be used beneficially in an educational context, and how an interactive floor can be created which is mobile and relatively inexpensive.......This article examines two research areas: How interactive floors can be used beneficially in an educational context, and how an interactive floor can be created which is mobile and relatively inexpensive....

  7. Hovering hummingbird wing aerodynamics during the annual cycle. II. Implications of wing feather moult

    Science.gov (United States)

    Sapir, Nir; Elimelech, Yossef

    2018-01-01

    Birds usually moult their feathers in a particular sequence which may incur aerodynamic, physiological and behavioural implications. Among birds, hummingbirds are unique species in their sustained hovering flight. Because hummingbirds frequently hover-feed, they must maintain sufficiently high flight capacities even when moulting their flight feathers. A hummingbird wing consists of 10 primary flight feathers whose absence during moult may strongly affect wing performance. Using dynamic similarity rules, we compared time-accurate aerodynamic loads and flow field measurements over several wing geometries that follow the natural feather moult sequence of Calypte anna, a common hummingbird species in western North America. Our results suggest a drop of more than 20% in lift production during the early stages of the moult sequence in which mid-wing flight feathers are moulted. We also found that the wing's ability to generate lift strongly depended on the morphological integrity of the outer primaries and leading-edge. These findings may explain the evolution of wing morphology and moult attributes. Specifically, the high overlap between adjacent wing feathers, especially at the wing tip, and the slow sequential replacement of the wing feathers result in a relatively small reduction in wing surface area during moult with limited aerodynamic implications. We present power and efficiency analyses for hover flight during moult under several plausible scenarios, suggesting that body mass reduction could be a compensatory mechanism that preserves the energetic costs of hover flight. PMID:29515884

  8. Flooring-systems and their interaction with usage of the floor

    DEFF Research Database (Denmark)

    Pedersen, Lars; Frier, Christian; Andersen, Lars Vabbersgaard

    2017-01-01

    Some flooring-system designs might be sensitive to their vibrational performance, as there might be the risk that serviceability-limit-state problems may be encountered. For evaluating the vibrational performance of the flooring-system at the design stage, decisions need to be made by the enginee...

  9. Total pelvic floor ultrasound for pelvic floor defaecatory dysfunction: a pictorial review

    Science.gov (United States)

    Solanki, Deepa; Schizas, Alexis M P; Williams, Andrew B

    2015-01-01

    Total pelvic floor ultrasound is used for the dynamic assessment of pelvic floor dysfunction and allows multicompartmental anatomical and functional assessment. Pelvic floor dysfunction includes defaecatory, urinary and sexual dysfunction, pelvic organ prolapse and pain. It is common, increasingly recognized and associated with increasing age and multiparity. Other options for assessment include defaecation proctography and defaecation MRI. Total pelvic floor ultrasound is a cheap, safe, imaging tool, which may be performed as a first-line investigation in outpatients. It allows dynamic assessment of the entire pelvic floor, essential for treatment planning for females who often have multiple diagnoses where treatment should address all aspects of dysfunction to yield optimal results. Transvaginal scanning using a rotating single crystal probe provides sagittal views of bladder neck support anteriorly. Posterior transvaginal ultrasound may reveal rectocoele, enterocoele or intussusception whilst bearing down. The vaginal probe is also used to acquire a 360° cross-sectional image to allow anatomical visualization of the pelvic floor and provides information regarding levator plate integrity and pelvic organ alignment. Dynamic transperineal ultrasound using a conventional curved array probe provides a global view of the anterior, middle and posterior compartments and may show cystocoele, enterocoele, sigmoidocoele or rectocoele. This pictorial review provides an atlas of normal and pathological images required for global pelvic floor assessment in females presenting with defaecatory dysfunction. Total pelvic floor ultrasound may be used with complementary endoanal ultrasound to assess the sphincter complex, but this is beyond the scope of this review. PMID:26388109

  10. Semi-automated quantitative Drosophila wings measurements.

    Science.gov (United States)

    Loh, Sheng Yang Michael; Ogawa, Yoshitaka; Kawana, Sara; Tamura, Koichiro; Lee, Hwee Kuan

    2017-06-28

    Drosophila melanogaster is an important organism used in many fields of biological research such as genetics and developmental biology. Drosophila wings have been widely used to study the genetics of development, morphometrics and evolution. Therefore there is much interest in quantifying wing structures of Drosophila. Advancement in technology has increased the ease in which images of Drosophila can be acquired. However such studies have been limited by the slow and tedious process of acquiring phenotypic data. We have developed a system that automatically detects and measures key points and vein segments on a Drosophila wing. Key points are detected by performing image transformations and template matching on Drosophila wing images while vein segments are detected using an Active Contour algorithm. The accuracy of our key point detection was compared against key point annotations of users. We also performed key point detection using different training data sets of Drosophila wing images. We compared our software with an existing automated image analysis system for Drosophila wings and showed that our system performs better than the state of the art. Vein segments were manually measured and compared against the measurements obtained from our system. Our system was able to detect specific key points and vein segments from Drosophila wing images with high accuracy.

  11. WOODEN FLOORING – BETWEEN PRESENT AND FUTURE

    Directory of Open Access Journals (Sweden)

    Ivan CISMARU

    2015-06-01

    Full Text Available The paper aims at presenting a systematization of the wood floors, both in terms of the areas of application, and in terms of the fastening solutions and structures in constructions. In this respect, an extensive bibliographic research was achieved, on the researchers’ preoccupations. Starting from the current situation and forecasting the future, from the point of view of the chances held by wooden flooring, in competition with other types of materials, we dare say the wooden flooring or the wood in combination with other materials are not likely to be eliminated from the “civil-engineering market”. The wood floors are likely to develop as an application, especially in the area of the “special floors”, specific to the indoor sports or social halls; and even for some industrial sectors, with strict operating conditions (elasticity, thermal insulation, soundproofing that cannot be provided by other types of materials or structures. Starting from this last observation, the paper also aims at submitting current opinions with respect to this type of floors, both in the light of the current databases and in the light of the future researches, to this end

  12. Glazed Tiles as Floor Finish in Nigeria

    Directory of Open Access Journals (Sweden)

    Toyin Emmanuel AKINDE

    2013-09-01

    Full Text Available Tile is no doubt rich in antiquity; its primordial  show, came as mosaic with primary prospect in sacred floor finish before its oblivion, courtesy of, later consciousness towards wall finish in banquets, kitchens, toilets, restaurants and even bars. Today, its renaissance as floor finish is apparent in private and public architectural structures with prevalence in residential, recreational, commercial, governmental and other spaces. In Nigeria, the use of glazed tiles as floor finish became apparent, supposedly in mid-twentieth century; and has since, witnessed ever increasing demands from all sundry; a development that is nascent and has necessitated its mass  production locally with pockets of firms in the country. The latter however, is a resultant response to taste cum glazed tiles affordability, whose divergent sophistication in design, colour, size and shape is believed preferred to terrazzo, carpet and floor flex tile. Accessible as glazed tile and production is, in recent times; its dearth of a holistic literature in Nigeria is obvious. In the light of the latter, this paper examine glazed tiles as floor finish in Nigeria, its advent, usage, production, challenge, benefit and prospect with the hope of opening further frontier in discipline specifics.

  13. Pelvic floor health: a concept analysis.

    Science.gov (United States)

    Pierce, Heather; Perry, Lin; Gallagher, Robyn; Chiarelli, Pauline

    2015-05-01

    To report an analysis of the concept 'pelvic floor health'. 'Pelvic floor health' is a term used by multiple healthcare disciplines, yet as a concept is not well defined. Rodger's evolutionary view was used to guide this analysis. Academic literature databases and public domain websites viewed via the Internet search engine Google. Literature in English, published 1946-July 2014 was reviewed. Websites were accessed in May 2014, then analysed of presentation for relevance and content until data saturation. Thematic analysis identified attributes, antecedents and consequences of the concept. Based on the defining attributes identified in the analysis, a contemporary definition is offered. 'Pelvic floor health' is the physical and functional integrity of the pelvic floor unit through the life stages of an individual (male or female), permitting an optimal quality of life through its multifunctional role, where the individual possesses or has access to knowledge, which empowers the ability to prevent or manage dysfunction. This analysis provides a definition of 'pelvic floor health' that is based on a current shared meaning and distinguishes the term from medical and lay terms in a complex, multifaceted and often under-reported area of healthcare knowledge. This definition provides a basis for theory development in future research, by focusing on health rather than disorders or dysfunction. Further development of the meaning is required in an individual's social context, to ensure a contemporaneous understanding in a dynamic system of healthcare provision. © 2015 John Wiley & Sons Ltd.

  14. Effects of Floor Covering Resistance of a Radiant Floor on System Energy and Exergy Performances

    DEFF Research Database (Denmark)

    Kazanci, Ongun Berk; Shukuya, Masanori; Olesen, Bjarne W.

    2016-01-01

    Floor covering resistance (material and thickness) can be influenced by subjective choices (architectural design, interior design, texture, etc.) with significant effects on the performance of a radiant heating and cooling system. To study the effects of floor covering resistance on system...... performance, a water-based radiant floor heating and cooling system (dry, wooden construction) was considered to be coupled to an air-to-water heat pump, and the effects of varying floor covering resistances (0.05 m2K/W, 0.09 m2K/W and 0.15 m2K/W) on system performance were analyzed in terms of energy...... and exergy. In order to achieve the same heating and cooling outputs, higher average water temperatures are required in the heating mode (and lower temperatures in the cooling mode) with increasing floor covering resistance. These temperature requirements decrease the heat pump’s performance (lower...

  15. Novel Control Effectors for Truss Braced Wing

    Science.gov (United States)

    White, Edward V.; Kapania, Rakesh K.; Joshi, Shiv

    2015-01-01

    At cruise flight conditions very high aspect ratio/low sweep truss braced wings (TBW) may be subject to design requirements that distinguish them from more highly swept cantilevered wings. High aspect ratio, short chord length and relative thinness of the airfoil sections all contribute to relatively low wing torsional stiffness. This may lead to aeroelastic issues such as aileron reversal and low flutter margins. In order to counteract these issues, high aspect ratio/low sweep wings may need to carry additional high speed control effectors to operate when outboard ailerons are in reversal and/or must carry additional structural weight to enhance torsional stiffness. The novel control effector evaluated in this study is a variable sweep raked wing tip with an aileron control surface. Forward sweep of the tip allows the aileron to align closely with the torsional axis of the wing and operate in a conventional fashion. Aft sweep of the tip creates a large moment arm from the aileron to the wing torsional axis greatly enhancing aileron reversal. The novelty comes from using this enhanced and controllable aileron reversal effect to provide roll control authority by acting as a servo tab and providing roll control through intentional twist of the wing. In this case the reduced torsional stiffness of the wing becomes an advantage to be exploited. The study results show that the novel control effector concept does provide roll control as described, but only for a restricted class of TBW aircraft configurations. For the configuration studied (long range, dual aisle, Mach 0.85 cruise) the novel control effector provides significant benefits including up to 12% reduction in fuel burn.

  16. Nonlinear Structures Optimization for Flexible Flapping Wing MAVs

    Science.gov (United States)

    2009-02-01

    nonlinear optimization, flapping wing, fluid structure interaction, micro -air vehicles, flexible wing, flapping mechanism 16. SECURITY... Structures Optimization for Flexible Flapping Wing Micro -Air Vehicles” was funded with Chief Scientist Innovative Research funds. This project was divided...predict a 10% resisting load to the model, and Python Scripting to wrap around everything. 2 Building the Model in Abaqus CAE The flapping wing

  17. Generic Wing-Body Aerodynamics Data Base

    Science.gov (United States)

    Holst, Terry L.; Olsen, Thomas H.; Kwak, Dochan (Technical Monitor)

    2001-01-01

    The wing-body aerodynamics data base consists of a series of CFD (Computational Fluid Dynamics) simulations about a generic wing body configuration consisting of a ogive-circular-cylinder fuselage and a simple symmetric wing mid-mounted on the fuselage. Solutions have been obtained for Nonlinear Potential (P), Euler (E) and Navier-Stokes (N) solvers over a range of subsonic and transonic Mach numbers and angles of attack. In addition, each solution has been computed on a series of grids, coarse, medium and fine to permit an assessment of grid refinement errors.

  18. Unemployment and Right-Wing Extremist Crime

    OpenAIRE

    Falk, Armin; Zweimüller, Josef

    2005-01-01

    Right-wing extremism is a serious problem in many societies. A prominent hypothesis states that unemployment plays a crucial role for the occurrence of right-wing extremist crime. In this paper we empirically test this hypothesis. We use a previously not used data set which includes all officially recorded right-wing criminal acts in Germany. These data are recorded by the German Federal Criminal Police Office on a monthly and state level basis. Our main finding is that there is in fact a sig...

  19. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Infections and inflammation”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Infections and inflammation”ABS 1. ARE ANTIBIOTICS A RISK FACTOR FOR THE DEVELOPMENT OF NECROTIZING ENTEROCOLITIS? • A. Raba, A. O’Sullivan, J. MiletinABS 2. CLINICAL CHARACTERISTICS AND OUTCOME OF NEONATAL URINARY TRACT INFECTIONS • A. Hadzimuratovic, E. Hadzimuratovic, A. Dzananovic, I. Pasic SeficABS 3. FREQUENCY OF LATE-ONSET INFECTIONS DURING PRIMARY HOSPITALIZATION: DIFFERENCES BETWEEN SMALL-FOR-GESTATIONAL-AGE AND APPROPRIATE-FOR-GESTATIONAL-AGE PRETERM INFANTS • A. MaticABS 4. DIABETIC PREGNANCY ACTIVATES INNATE IMMUNE RESPONSE THROUGH TLR5 OR TLR1/2 ON CORD BLOOD-DERIVED MONOCYTES • D. Tokuhara, S. Yanai, D. Tachibana, M. Saito, Y. Cho, M. Koyama, H. ShintakuABS 5. CONGENITAL CYTOMEGALOVIRUS INFECTION: A CLINICAL STUDY • S. Stefanovic, V. Stefanovic, V. StefanovicABS 6. DIAGNOSTIC BIOMARKERS IN EARLY NEONATAL SEPSIS: TLR-2 AND TLR-4 VERSUS CONVENTIONAL MARKERS • G. Zaharie, L. Blaga, M. Hasmasanu, S. Bolboaca, M. MatyasABS 7. URINARY KIDNEY INJURY MARKERS IN NEONATES WITH URINARY TRACT INFECTION AND PNEUMONIA • A. Tarko, A. Suchojad, A. Brzozowska, M. Michalec, I. Maruniak-ChudekABS 8. EARLY DETECTION OF NEONATAL INFECTION AT BIRTH IN PREMATURE INFANTS BY CLINICAL AND LABORATORY MARKERS • A. Masseva, N. Jekova, E. Shopova, B. MarinovABS 9. PERSISTENT METABOLIC ACIDOSIS AND METHEMOGLOBINEMIA IN COW’S MILK PROTEIN-INDUCED ENTEROCOLITIS • M. Miñambres Rodríguez, C. Alonso Vicente, M. Pino, A. Pino Vázquez, J.M. Marugán de Miguelsanz, I. Sanz FernándezABS 10. INTERLEUKIN 17A IN BRONCHOALVEOLAR LAVAGE FLUID: AN EARLY MARKER OF VENTILATOR-ASSOCIATED PNEUMONIA (VAP IN PRETERM INFANTS • M. Cernada, J. Escobar, J. Kuligowski, A. Núñez, E. Cubells, A. Parra, M. VentoABS 11. VERY LOW WEIGHT PRETERM TWINS DIAGNOSED WITH LATE-ONSET SEPSIS SHOW CHANGES IN GUT MICROBIOTA PROFILES AND MUCOSAL

  20. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Neonatology and NICU clinical care and practices”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Neonatology and NICU clinical care and practices”ABS 1. BILATERAL CLAVICLE FRACTURE: A RARE CAUSE OF PERSISTENT CRYING • P. Cruz, P. Mendes, M. Anselmo, L. GonçalvesABS 2. NEONATAL TRANSPORT DURATION AND SHORT-TERM OUTCOME IN VERY-LOW-GESTATIONAL-AGE NEONATES • A. Matic, M. Gavrilovic LatinovicABS 3. PEMPHIGOID GESTATIONIS – A RARE CASE IN TWIN PREGNANCY • L. Gonçalves, E. Scortenschi, P. Cruz, P. Mendes, M. AnselmoABS 4. DEVELOPMENT OF A CLINICIAN-REPORTED OUTCOME (ClinRO MEASURE TO ASSESS READINESS FOR DISCHARGE FROM NEONATAL CARE AMONG EXTREMELY PRETERM INFANTS • M. Turner, R. Ward, J. Higginson, I. Hansen-Pupp, M. Vanya, E. Flood, G. Quiggle, A. Tocoian, A. Mangili, N. Barton, S. SardaABS 5. THE EFFECT OF THYROID HORMONES ON NICU ADMISSION DUE TO TRANSIENT TACHYPNEA OF NEWBORN IN LATE PRETERM AND TERM INFANTS • T. Gursoy, S. Ercin, P. Kayiran, B. GurakanABS 6. IMPROVING THE QUALITY OF PROLONGED JAUNDICE WORK-UPS IN THE OUTPATIENT DEPARTMENT IN A TERTIARY NEONATAL CENTRE • C.M. Moore, J. O’Loughlin, B.C. HayesABS 7. SAVE THE DATE? CORRECT RECORDING OF DAY OF LIFE AND CORRECTED GESTATIONAL AGE IN NICU • C.M. Moore, A.F. El-KhuffashABS 8. PARENTS IN NICU: THE IMPORTANCE OF INTEGRATION BETWEEN THE CURE AND THE CARE • G. De Bernardo, M. Svelto, M. Giordano, D. SordinoABS 9. THE PREVALENCE OF HEREDITARY HEARING LOSS IN 41,152 NEWBORNS DURING THE PERIOD 2011-2015 • S.T. Hsu, C.C. Hung, Y.N. Su, C.Y. Chen, H.C. Chou, W.S. Hsieh, C.C. Wu, P.N. TsaoABS 10. DEFICIENCY OF MULTIPLE acyl-CoA DEHYDROGENASE OR GLUTARIC ACIDURIA TYPE II • M. Torres, L. Geronès, J. Herrero, M.C. Cèspedes, F. Camba, J.A. Arranz, M. del Toro, F. CastilloABS 11. TEN YEARS OF EXPERIENCE IN CARRIER SCREENING FOR SPINAL MUSCULAR ATROPHY IN TAIWAN • C.Y. Chuang, C.C. Hung, Y.N. Su, P.N. TsaoABS 12. REDUCING MEDICATION ERRORS ON THE

  1. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Miscellanea”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Miscellanea”ABS 1. CALVARIAL AGENESIS AND APLASIA CUTIS CONGENITA: A CASE REPORT • F.P. Bunjamin, R.D. RoeslaniABS 2. NEUROCUTANEOUS MELANOSIS IN A NEWBORN • R. Tameliene, A. Vinskaite, J. Buinauskiene, R. DzikieneABS 3. TLR2/TLR6 HETERODIMER-MEDIATED INNATE IMMUNE RESPONSE IN CORD BLOOD IMMUNE CELLS • Y. Cho, D. Tokuhara, K. Nohmi, M. Saito, D. Tachibana, M. Koyama, H. ShintakuABS 4. PRADER-WILLI SYNDROME IN OUR HOSPITAL. ARE WE DIAGNOSING AND TREATING EARLY? • B. Rodriguez Azor, R. Roldán López, S. Ariza Aranda, D. López Martín, T. Fernandez Ferrandez, V. Schmitz, E. Salguero García, T. Sánchez TamayoABS 5. RISK FACTORS ASSOCIATED WITH PRENATAL EXPOSURE TO “SHABU” • J. Candel Pau, J. García García, C. Manzano Varo, L. Román Eyo, S. Calpe Fraile, MA. López-VílchezABS 6. VITAMIN D STATUS IN PREGNANT WOMEN AND NEWBORNS IN LA RIOJA AREA IN SPAIN • M. Ruiz, B. Riaño, MY. Ruiz, MP. Samper, P. VenturaABS 7. NEONATAL RESUSCITATION TRAINING COURSES. TRAINEES’ PERCEPTION • S. Zeballos Sarrato, G. Zeballos, C. Ramos, N. Oikonomopoulou, N. Navarro, M. Sánchez LunaABS 8. METABOLOMIC PROFILE IN NEWBORNS MIRRORS THAT OF THEIR MOTHERS IN PREGNANCY • S. Negro, M. Longini, ML. Tataranno, F. Proietti, M. Tassini, A. Vivi, F. Bazzini, E. Belvisi, F. Vanacore, M. Calderisi, G. Buonocore, S. PerroneABS 9. INTRAUTERINE MECONIUM PERITONITIS DUE TO SIGMOID PERFORATION OF UNKNOWN ETIOLOGY IN A 29 WEEKER: MANAGEMENT AND OUTCOME. A CASE PRESENTATION • M. Simon, M. Rusneac, R. Marian, Z.S. Gall, L.M. Suciu, M.C. CucereaABS 10. THE RESULTS OF NEWBORN HEARING SCREENING BY MEANS OF TRANSIENT OTOACOUSTIC EMISSIONS – HAS ANYTHING CHANGED OVER 10 YEARS? • K. Wroblewska-Seniuk, G. Greczka, P. Dabrowski, J. MazelaABS 11. NEONATAL GASTRIC PERFORATION: A REPORT OF ONE CASE IN OUR NICU • N. Lecumberri García, I

  2. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Epidemiology, perinatology and DOHaD”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Epidemiology, perinatology and DOHaD”ABS 1. THE INFLUENCE OF MATERNAL PREGESTATIONAL OBESITY IN OFFSPRING. A NEW PUBLIC HEALTH PROBLEM • P. Priego, N. Sancho, I. Tofe, A. Torre, M.D. CañeteABS 2. UNPLANNED NEONATAL ADMISSION RATE AFTER ELECTIVE FAMILY CENTERED CAESAREAN SECTIONS • I.C. Narayen, E.E.M. Mulder, L.M. Freeman, J.J. Van Vonderen, K.E. Boers, A.B. Te PasABS 3. CESAREAN DELIVERY AMONG FOREIGN-BORN CHINESE AND US-BORN CHINESE WOMEN IN THE USA • T.A. Yen, M. Lahiff, N. Hosang, K. Harley, B. EskenaziABS 4. THE RELATION BETWEEN OUTDOOR AIR POLLUTION AND SUDDEN INFANT DEATH SYNDROME – A POPULATION-BASED CASE-CONTROL STUDY • Y.S. Chang, C.H. Liu, P.N. Tsao, P.S. ChenABS 5. LONGITUDINAL GROWTH OF TURKISH VERY LOW BIRTH WEIGHT INFANTS • S. Sancak, M. Hayran, T. Gursoy, F. OvalıABS 6. FETAL SONOGRAPHIC FINDINGS IN A CONFIRMED CASE OF BECKWITH-WIEDEMANN SYNDROME (BWS • M.D. Ordónez Díaz, M.A. Pino Gálvez, C. De la Cámara Morano, D. Trassierra Molina, M.P. Priego Ruiz, M.J. Párraga Quiles, A.B. López Marmol, J.L. Pérez Navero, M. Miño MoraABS 7. CORD BLOOD PENTRAXIN 3/CD36 IN FETAL MACROSOMIA • T. Boutsikou, K. Germanou, D.D. Briana, M. Boutsikou, N. Athanasopoulos, A. Marmarinos, D. Gourgiotis, A. Malamitsi-PuchnerABS 8. NEWBORN GENETIC SCREENING FOR CONGENITAL CENTRAL HYPOVENTILATION SYNDROME IN 41,152 NEWBORNS • P.C. Kuo, C.C. Hung, Y.N. Su, C.Y. Chen, H.C. Chou, W.S. Hsieh, P.N. TsaoABS 9. OFFSPRING OF DIABETIC MOTHER: THE IMPORTANCE OF MATERNAL GLYCEMIC CONTROL • M. Miñambres Rodríguez, A. Pino Vázquez, C. Villa Francisco, I. Sanz Fernández, M. Brezmes Raposo, L. C. Bermúdez BarrezuetaABS 10. PREVALENCE AND PRENATAL DIAGNOSIS OF CONGENITAL MALFORMATIONS IN A TERTIARY HOSPITAL • M.P. Priego Ruiz, M.D. Ordónez Díaz, M.V. Rodriguez Benitez, D. Trassierra Molina, L. Rueda García, J.L. P

  3. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Lung and development”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Lung and development”ABS 1. AN OPEN LABEL, DOSE-ESCALATION STUDY OF LUCINACTANT FOR INHALATION DELIVERED VIA NASAL CONTINUOUS POSITIVE AIRWAY PRESSURE (nCPAP FOR TREATING RESPIRATORY DISTRESS SYNDROME (RDS IN PRETERM NEONATES • J. Mazela, N.N. Finer, S.G. Simonson, PM. Shore, P. Simmons, R. SegalABS 2. PRETERM DELIVERY: PREVENTION AND MANAGEMENT OF RESPIRATORY DISEASES IN THE HOSPITAL OF PERUGIA • L. Fatigoni, L. Minelli, M. ChiavariniABS 3. EFFECTS OF HIGH INSUFFLATION PRESSURE ON THE HISTOPATHOLOGICAL AND RADIOLOGICAL FINDINGS IN EXPERIMENTAL ANIMAL LUNGS DURING MECHANICAL VENTILATION • N. Videnović1, J. Mladenovic, V. Videnovic, S. Mihajlov, S. Trpkovic, R. ZdravkovicABS 4. A CONGENITAL CHYLOTHORAX MIMICKING PNEUMONIA • K.Ş. Tekgunduz, Y. Demirelli, M. Kara, İ. CanerABS 5. SINGLE CENTRE USE OF MONTELUKAST • D. Panjwani, R. deBoer, P SatodiaABS 6. RESPIRATORY MANAGEMENT AND BRONCHOPULMONARY DYSPLASIA • C. Ramos-Navarro, P. Chimenti-Camacho, N. Gonzalez-Pacheco, S. Villar-Castro, G. Zeballos-Sarrato, Perez-Perez Alba, M. Sanchez-Gomez de Orgaz, M. Sanchez-LunaABS 7. EARLY MANAGEMENT OF NEONATAL RESPIRATORY DISTRESS SYNDROME – A SURVEY AMONG UK NEONATAL INTENSIVE CARE UNITS • G. Hendriks, R. Stephenson, K. YajamanyamABS 8. DYSREGULATION OF SOLUBLE FMS-LIKE TYROSINE KINASE 1 (SFLT-1 CONTRIBUTES TO PULMONARY HYPERTENSION • C. Chen, P. Tsao, S. WeiABS 9. SECONDARY RESPIRATORY SUPPORT OF PRETERM INFANTS: NON-INVASIVE VENTILATION VERSUS CONTINUOUS POSITIVE AIRWAY PRESSURE • A. Menshykova, D. DobryanskyyABS 10. FATAL NEONATAL RESPIRATORY FAILURE DUE TO NON PREVIOUSLY DESCRIBED ABCA3 MUTATIONS • I. Sanz Fernández, M. Miñambres Rodriguez, J.J. Telleria Orriols, M. Marcos Temprano, M. Pino Velázquez, A. Pino VázquezABS 11. CONGENITAL STRIDOR DUE TO BILATERAL VOCAL CORD PARALYSIS • I. Sanz Fernández, M. Mi

  4. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Heart and development”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Heart and development”ABS 1. MANAGEMENT OF PATENT DUCTUS ARTERIOSUS IN TWO TERTIARY NEONATAL UNITS • D. Panjwani, J. Kapur, V Rasiah, K. GurgusamyABS 2. NT-PROBNP LEVELS AT 48-96 HOURS OF LIFE CAN PREDICT THE NEED FOR TREATMENT OF A HEMODYNAMICALLY SIGNIFICANT PATENT DUCTUS ARTERIOSUS IN VERY LOW-BIRTH-WEIGHT INFANTS • S. Rodriguez-Blanco, I. Oulego-Erroz, S. Gautreaux-Minaya, M. Couce-PicoABS 3. THE ASSOCIATION BETWEEN NIRS AND DOPPLER ULTRASONOGRAPHY IN PRETERM INFANTS • D. Arman, S. Sancak, T. Gursoy, S. Topcuoglu, G. Karatekin, F. OvaliABS 4. CARDIOVASCULAR RISK: SCHEDULED OR NOT? • B. Riaño, M. Ruiz, MY. Ruiz, P. Ventura, MP. SamperABS 5. POSTNATAL OUTCOME OF FETAL TACHYARRHYTHMIAS: 7-YEAR TERTIARY NEONATAL INTENSIVE CARE UNIT EXPERIENCE • P. Mikrou, M. Borooah, S.V. RasiahABS 6. POSTNATAL SUPRAVENTRICULAR TACHYCARDIA: 7-YEAR EXPERIENCE IN A TERTIARY NEONATAL INTENSIVE UNIT • P. Mikrou, M. Borooah, S.V. RasiahABS 7. LOWER HYDRATION IN NEONATES WITH CONGENITAL HEART DEFECT DOES NOT CAUSE THE INCREASE IN PLASMA COPEPTIN CONCENTRATION – PRELIMINARY DATA • A. Suchojad, A. Tarko, S. Simonova, J. Kordyś, I. Maruniak-ChudeABS 8. CONGENITAL HEART DISEASE IN NEWBORNS: SIGNS AND SYMPTOMS • B. Miljkovic, M. Jonovic, N. Stojanovic, G. JovanovicABS 9. DIAGNOSIS OF CONGENITAL HEART DEFECTS IN A TERTIARY HOSPITAL (2010-2016 • G. Sierra, I. Naberan, N. Lecumberri, S. Torrus, N. Jordá, I. GilABS 10. CORRELATION OF FRACTIONAL SHORTENING, EJECTION FRACTION AND BLOOD PRESSURE IN PREMATURE INFANTS • N. Lee, S. Yun, S. Chae, I. LimABS 11. A WINDOW OF OPPORTUNITY FOR PDA TREATMENT • P. Priego, I. Tofe, MD. Cañete, M. ParragaABS 12. PARACETAMOL AS A POSSIBLE TREATMENT OF CHOICE FOR PATENT DUCTUS ARTERIOSUS • S. Rodriguez-Blanco, R. Galvez-Criado, I. Oulego-Erroz, A. Perez-MuñuzuriABS 13. PARACETAMOL FOR DUCTAL CLOSURE

  5. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Gut, gastroenterology and nutrition”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Gut, gastroenterology and nutrition”ABS 1. MATERNAL FACTORS ASSOCIATED WITH EARLY POSTNATAL WEIGHT LOSS IN EXCLUSIVELY BREASTFED NEONATES • C.J. Lee, T.H. Liu, J.Y. Liou, Y.C. Chen, P.N. TsaoABS 2. USE OF INSULIN ON PRETERM NEONATES: A GOOD IDEA? • D. Panjwani, G. HoldenABS 3. RISK FACTORS OF DELAYED ONSET OF LACTATION ASSOCIATED NEONATAL TO HYPERBILIRUBINEMIA • C. Kuok, T. Liu, J. Liou, Y. Chen, P. TsaoABS 4. NUTRITIONAL MANAGEMENT PRACTICE AND POSTNATAL GROWTH OF PRETERM INFANTS • S. Heljic, S. Terzic, H. Maksic, A. HalilovicABS 5. BREAST MILK EXPRESSION AT THE NICU: EXPERIENCES OF MOTHERS EXPRESSING AT THEIR PRETERM INFANT’S BEDSIDE OR IN A BREAST MILK EXPRESSION ROOM • M. Héon, L. Bell, R. Flacking, C. CatelinABS 6. RELIABILITY OF THE OM-6050 OSMOMETER STATION TO ANALYSE THE OSMOLARITY OF FORTIFIED BREAST MILK • A. Herranz Barbero, N. Rico Santana, J. Figueras Aloy, F. Botet Mussons, M.D. Salvia RoigésABS 7. MICROBIOTA OF TERM INFANTS DELIVERED VAGINALLY VS. CESAREAN SECTION – INFLUENCE OF HOME ENVIRONMENT • A. Bartnicka, M. Gałęcka, J. MazelaABS 8. FACTORS INFLUENCING BREASTFEEDING OF PREMATURE NEWBORNS • N. Skorobogatova, D. Stoniene, J. Ribeliene, E. Meškelevičiūtė, R. Penkauskaitė, R. TamelieneABS 9. RISK FACTORS REGARDING SUCCESSFUL EXCLUSIVE BREASTFEEDING • M. Miñambres Rodríguez, L.C. Bermúdez Barrezueta, A. Pino Vázquez, M.C. Fernández García-Abril, M. Palomares Cardador, V. MatíasABS 10. THE INFLUENCE OF MOTHER’S ATTITUDE AND MEDICAL STAFF’S ACTIONS ON THE RATES OF BREASTFEEDING OF PRETERM INFANTS • J. Ribeliene, D. Stoniene, N. Skorobogatova, E. Meškelevičiūtė, R. Penkauskaitė, R. TamelieneABS 11. DONOR HUMAN MILK OFFERS PROTECTION AGAINST LIPID OXIDATIVE STRESS IN PRETERM INFANTS < 32 WEEKS OF GESTATIONAL AGE • J. Kuligowski, A. Parra-Llorca, Á. Sánchez-Illana, M

  6. Dermoid cyst in the mouth floor

    International Nuclear Information System (INIS)

    Portelles Masso, Ayelen Maria; Torres Inniguez, Ailin Tamara.

    2010-01-01

    The Dermoid cyst account for the 0.01 % of all cysts of buccal cavity. Its more frequent location is in the mouth floor. This is the case of a female patient aged 19 who approximately 7 years noted an increase of volume under tongue growing gradually and noting outside face and the discomfort at to speak and to chew. Complementary studies were conducted and under general anesthesia a surgical exeresis was carried out by intrabuccal approach achieving excellent esthetic and functional results. Histopathologic diagnosis matched with a dermoid cyst of mouth floor. Patient has not lesion recurrence after three years after operation. We conclude that the Dermoid cyst of mouth floor appear as benign tumor of middle line. The intrabuccal exeresis demonstrates esthetic and functional benefits. (author)

  7. Development of rationalized system treating floor drain

    International Nuclear Information System (INIS)

    Nakamura, Yasuyuki; Serizawa, Kenichi; Komatsu, Akihiro; Shimizu, Takayuki

    1998-01-01

    Radioactive liquid wastes generated at BWR plants are collected and treated as required. These days, however, generation of floor drain has deceased and HFF (Hollow Fiber Filter) has experienced a wide applicability to several kinds of liquid wastes. We should consider that the floor drain can be mixed and diluted with equipment drain and be purified by HFF. That enables some of the sumps and long priming pipes to be combined. From this point of view, we have developed a highly rationalized waste liquid system. We have evaluated the applicability of this system after an investigation into the generation and properties of floor drain and equipment drain at the latest BWR'S and an on-site test at a typical BWR. (author)

  8. Imaging of the posterior pelvic floor

    Energy Technology Data Exchange (ETDEWEB)

    Stoker, Jaap [Department of Radiology, Academic Medical Center, University of Amsterdam (Netherlands); Bartram, Clive I.; Halligan, Steve [Intestinal Imaging Centre, St. Mark' s Hospital, London (United Kingdom)

    2002-04-01

    Disorders of the posterior pelvic floor are relatively common. The role of imaging in this field is increasing, especially in constipation, prolapse and anal incontinence, and currently imaging is an integral part of the investigation of these pelvic floor disorders. Evacuation proctography provides both structural and functional information for rectal voiding and prolapse. Dynamic MRI may be a valuable alternative as the pelvic floor muscles are visualised, and it is currently under evaluation. Endoluminal imaging is important in the management of anal incontinence. Both endosonography and endoanal MRI can be used for detection of anal sphincter defects. Endoanal MRI has the advantage of simultaneously evaluating external sphincter atrophy, which is an important predictive factor for the outcome of sphincter repair. Many aspects of constipation and prolapse remain incompletely understood and treatment is partly empirical; however, imaging has a central role in management to place patients into treatment-defined groups. (orig.)

  9. Imaging of the posterior pelvic floor

    International Nuclear Information System (INIS)

    Stoker, Jaap; Bartram, Clive I.; Halligan, Steve

    2002-01-01

    Disorders of the posterior pelvic floor are relatively common. The role of imaging in this field is increasing, especially in constipation, prolapse and anal incontinence, and currently imaging is an integral part of the investigation of these pelvic floor disorders. Evacuation proctography provides both structural and functional information for rectal voiding and prolapse. Dynamic MRI may be a valuable alternative as the pelvic floor muscles are visualised, and it is currently under evaluation. Endoluminal imaging is important in the management of anal incontinence. Both endosonography and endoanal MRI can be used for detection of anal sphincter defects. Endoanal MRI has the advantage of simultaneously evaluating external sphincter atrophy, which is an important predictive factor for the outcome of sphincter repair. Many aspects of constipation and prolapse remain incompletely understood and treatment is partly empirical; however, imaging has a central role in management to place patients into treatment-defined groups. (orig.)

  10. FijiWings: an open source toolkit for semiautomated morphometric analysis of insect wings.

    Science.gov (United States)

    Dobens, Alexander C; Dobens, Leonard L

    2013-08-07

    Development requires coordination between cell proliferation and cell growth to pattern the proper size of tissues, organs, and whole organisms. The Drosophila wing has landmark features, such as the location of veins patterned by cell groups and trichome structures produced by individual cells, that are useful to examine the genetic contributions to both tissue and cell size. Wing size and trichome density have been measured manually, which is tedious and error prone, and although image processing and pattern-recognition software can quantify features in micrographs, this approach has not been applied to insect wings. Here we present FijiWings, a set of macros designed to perform semiautomated morphophometric analysis of a wing photomicrograph. FijiWings uses plug-ins installed in the Fiji version of ImageJ to detect and count trichomes and measure wing area either to calculate trichome density of a defined region selected by the user or generate a heat map of overall trichome densities. For high-throughput screens we have developed a macro that directs a trainable segmentation plug-in to detect wing vein locations either to measure trichome density in specific intervein regions or produce a heat map of relative intervein areas. We use wing GAL4 drivers and UAS-regulated transgenes to confirm the ability of these tools to detect changes in overall tissue growth and individual cell size. FijiWings is freely available and will be of interest to a broad community of fly geneticists studying both the effect of gene function on wing patterning and the evolution of wing morphology.

  11. Carbon dioxide disposal on the ocean floor

    International Nuclear Information System (INIS)

    Giavarini, C.; Maccioni, F.

    2001-01-01

    A lot of experts propose to dispose of the Co2 in the Oceans; but there is some confusion on that subject. The possibility of dispersing the Carbon Dioxide on the Ocean floor must be considered with great caution, carefully studying all the possible balances Co2 is subject to. A parameter which must be considered is the possibility for Co2 - whatever the form may be - of solving in the sea water, even when very deep. At the moment, the most safe way of storing the Co2 in the oceans seems to be the introduction of Co2 Hydrates into the sediments under the ocean floor [it

  12. The leading-edge vortex of swift-wing shaped delta wings

    Science.gov (United States)

    Muir, Rowan; Arredondo-Galeana, Abel; Viola, Ignazio Maria

    2017-11-01

    Recent investigations on the aerodynamics of natural fliers have illuminated the significance of the Leading-Edge Vortex (LEV) for lift generation in a variety of flight conditions. In this investigation, a model non-slender delta shaped wing with a sharp leading-edge is tested at low Reynolds Number, along with a delta wing of the same design, but with a modified trailing edge inspired by the wing of a common swift Apus apus. The effect of the tapering swift wing on LEV development and stability is compared with the flow structure over the un-modified delta wing model through particle image velocimetry. For the first time, a leading-edge vortex system consisting of a dual or triple LEV is recorded on a swift-wing shaped delta wing, where such a system is found across all tested conditions. It is shown that the spanwise location of LEV breakdown is governed by the local chord rather than Reynolds Number or angle of attack. These findings suggest that the trailing-edge geometry of the swift wing alone does not prevent the common swift from generating an LEV system comparable with that of a delta shaped wing. This work received funding from the Engineering and Physical Sciences Research Council [EP/M506515/1] and the Consejo Nacional de Ciencia y Tecnología (CONACYT).

  13. Fruit fly scale robots can hover longer with flapping wings than with spinning wings.

    Science.gov (United States)

    Hawkes, Elliot W; Lentink, David

    2016-10-01

    Hovering flies generate exceptionally high lift, because their wings generate a stable leading edge vortex. Micro flying robots with a similar wing design can generate similar high lift by either flapping or spinning their wings. While it requires less power to spin a wing, the overall efficiency depends also on the actuator system driving the wing. Here, we present the first holistic analysis to calculate how long a fly-inspired micro robot can hover with flapping versus spinning wings across scales. We integrate aerodynamic data with data-driven scaling laws for actuator, electronics and mechanism performance from fruit fly to hummingbird scales. Our analysis finds that spinning wings driven by rotary actuators are superior for robots with wingspans similar to hummingbirds, yet flapping wings driven by oscillatory actuators are superior at fruit fly scale. This crossover is driven by the reduction in performance of rotary compared with oscillatory actuators at smaller scale. Our calculations emphasize that a systems-level analysis is essential for trading-off flapping versus spinning wings for micro flying robots. © 2016 The Author(s).

  14. Flow Modulation and Force Control of Flapping Wings

    Science.gov (United States)

    2014-10-29

    tested on a flapping wing model in the oil tank. Robotic flapper equipped with DC motors drove the wing model, and the imbedded servo motor could flap...the overall wake structure on the hovering wings. Totally, two volumetric flow measurements were performed on two mechanical flappers with different...wing kinematics but similar wing geometry. On the flappers with small stroke angle and passive rotation, the general vortex wake structure

  15. Left-Wing Extremism: The Current Threat

    Energy Technology Data Exchange (ETDEWEB)

    Karl A. Seger

    2001-04-30

    Left-wing extremism is ''alive and well'' both in the US and internationally. Although the current domestic terrorist threat within the U. S. is focused on right-wing extremists, left-wing extremists are also active and have several objectives. Leftist extremists also pose an espionage threat to U.S. interests. While the threat to the U.S. government from leftist extremists has decreased in the past decade, it has not disappeared. There are individuals and organizations within the U.S. who maintain the same ideology that resulted in the growth of left-wing terrorism in this country in the 1970s and 1980s. Some of the leaders from that era are still communicating from Cuba with their followers in the U.S., and new leaders and groups are emerging.

  16. A galactic microquasar mimicking winged radio galaxies.

    Science.gov (United States)

    Martí, Josep; Luque-Escamilla, Pedro L; Bosch-Ramon, Valentí; Paredes, Josep M

    2017-11-24

    A subclass of extragalactic radio sources known as winged radio galaxies has puzzled astronomers for many years. The wing features are detected at radio wavelengths as low-surface-brightness radio lobes that are clearly misaligned with respect to the main lobe axis. Different models compete to account for these peculiar structures. Here, we report observational evidence that the parsec-scale radio jets in the Galactic microquasar GRS 1758-258 give rise to a Z-shaped radio emission strongly reminiscent of the X and Z-shaped morphologies found in winged radio galaxies. This is the first time that such extended emission features are observed in a microquasar, providing a new analogy for its extragalactic relatives. From our observations, we can clearly favour the hydrodynamic backflow interpretation against other possible wing formation scenarios. Assuming that physical processes are similar, we can extrapolate this conclusion and suggest that this mechanism could also be at work in many extragalactic cases.

  17. Flow structure of vortex-wing interaction

    Science.gov (United States)

    McKenna, Christopher K.

    Impingement of a streamwise-oriented vortex upon a fin, tail, blade or wing represents a fundamental class of flow-structure interaction that extends across a range of applications. This interaction can give rise to time-averaged loading, as well as unsteady loading known as buffeting. The loading is sensitive to parameters of the incident vortex as well as the location of vortex impingement on the downstream aerodynamic surface, generically designated as a wing. Particle image velocimetry is employed to determine patterns of velocity, vorticity, swirl ratio, and streamlines on successive cross-flow planes upstream of and along the wing, which lead to volume representations and thereby characterization of the interaction. At locations upstream of the leading edge of the wing, the evolution of the incident vortex is affected by the presence of the wing, and is highly dependent on the spanwise location of vortex impingement. Even at spanwise locations of impingement well outboard of the wing tip, a substantial influence on the structure of the incident vortex at locations significantly upstream of the leading edge of the wing was observed. For spanwise locations close to or intersecting the vortex core, the effects of upstream influence of the wing on the vortex are to: decrease the swirl ratio; increase the streamwise velocity deficit; decrease the streamwise vorticity; increase the azimuthal vorticity; increase the upwash; decrease the downwash; and increase the root-mean-square fluctuations of both streamwise velocity and vorticity. The interrelationship between these effects is addressed, including the rapid attenuation of axial vorticity in presence of an enhanced defect of axial velocity in the central region of the vortex. Moreover, when the incident vortex is aligned with, or inboard of, the tip of the wing, the swirl ratio decreases to values associated with instability of the vortex, giving rise to enhanced values of azimuthal vorticity relative to the

  18. Thermal Performance Analysis of Reinforced Concrete Floor Structure with Radiant Floor Heating System in Apartment Housing

    Directory of Open Access Journals (Sweden)

    Young-Sun Jeong

    2015-01-01

    Full Text Available The use of the resilient materials in the radiant floor heating systems of reinforced concrete floor in apartment housing is closely related to the reduction of the floor impact sound and the heating energy loss. This study examined the thermal conductivity of expanded polystyrene (EPS foam used for the resilient material in South Korea and analysed the thermal transfer of reinforced concrete floor structure according to the thermal conductivity of the resilient materials. 82 EPS specimens were used to measure the thermal conductivity. The measured apparent density of EPS resilient materials ranged between 9.5 and 63.0 kg/m3, and the thermal conductivity ranged between 0.030 and 0.046 W/(m·K. As the density of resilient materials made of expanded polystyrene foam increases, the thermal conductivity tends to proportionately decrease. To set up reasonable thermal insulation requirements for radiant heating floor systems, the thermal properties of floor structure according to thermal insulation materials must be determined. Heat transfer simulations were performed to analyze the surface temperature, heat loss, and heat flow of floor structure with radiant heating system. As the thermal conductivity of EPS resilient material increased 1.6 times, the heat loss was of 3.4% increase.

  19. The leading-edge vortex of swift wing-shaped delta wings.

    Science.gov (United States)

    Muir, Rowan Eveline; Arredondo-Galeana, Abel; Viola, Ignazio Maria

    2017-08-01

    Recent investigations on the aerodynamics of natural fliers have illuminated the significance of the leading-edge vortex (LEV) for lift generation in a variety of flight conditions. A well-documented example of an LEV is that generated by aircraft with highly swept, delta-shaped wings. While the wing aerodynamics of a manoeuvring aircraft, a bird gliding and a bird in flapping flight vary significantly, it is believed that this existing knowledge can serve to add understanding to the complex aerodynamics of natural fliers. In this investigation, a model non-slender delta-shaped wing with a sharp leading edge is tested at low Reynolds number, along with a delta wing of the same design, but with a modified trailing edge inspired by the wing of a common swift Apus apus . The effect of the tapering swift wing on LEV development and stability is compared with the flow structure over the unmodified delta wing model through particle image velocimetry. For the first time, a leading-edge vortex system consisting of a dual or triple LEV is recorded on a swift wing-shaped delta wing, where such a system is found across all tested conditions. It is shown that the spanwise location of LEV breakdown is governed by the local chord rather than Reynolds number or angle of attack. These findings suggest that the trailing-edge geometry of the swift wing alone does not prevent the common swift from generating an LEV system comparable with that of a delta-shaped wing.

  20. Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Brain and development”

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2016-11-01

    Full Text Available Selected Abstracts of the 6th International Congress of UENPS; Valencia (Spain; November 23rd-25th 2016; Session “Brain and development”ABS 1. CRITICAL CONDITION OF THE FETUS: RISK FACTORS AND PERINATAL OUTCOMES • E. Timokhina, A. Strizhakov, K. DerishABS 2. A MID-STUDY SAFETY CONTROL IN A HYPOTHERMIA PLUS MELATONIN CLINICAL TRIAL • A. Jerez-Calero, E. Fernandez-Marin, L. Serrano-López, AR. Gonzalez-Ramirez, J. Uberos-Fernandez, E. Narbona-LópezABS 3. EARLY PREDICTORS OF NEURODEVELOPMENTAL OUTCOME IN ASPHYXIATED INFANTS TREATED WITH SELECTIVE HEAD COOLING • C.Y. Chen, P.N. Tsao, H.C. Chou, W.S. HsiehABS 4. PRENATAL SURGERY OF MYELOMENINGOCELE: IS IT WORTH DOING? • H. Villalon, M. Pinto, S. Hosiasson, F. Rybertt, A. Fernandez, D. Tuma, L. Pizarro, C. SilvaABS 5. NEONATAL CEREBRAL SINOVENOUS THROMBOSIS: TWO CASES, TWO DIFFERENT GENE POLYMORPHISMS AND RISK FACTORS • O. Turan, D. Anuk Ince, L. Olcay, T. Sezer, K. Gulleroglu, Z.Y. Çelik, A. EcevitABS 6. DEVELOPMENT OF PREMATURE BORN CHILDREN – WHAT ABOUT LANGUAGE, READING AND WRITING? THE SPEECH AND LANGUAGE PATHOLOGIST’S VIEW • Z. Kolundžić, M. Lenček, A. Šimić Klarić, K. Pavičić DokozaABS 7. CHARACTERISTICS AND DISCHARGE OUTCOMES OF INFANTS UNDERGOING THERAPEUTIC HYPOTHERMIA IN AMERICAN NICUs • K. Ellsworth, M. Harris, M. Ellsworth, W. Carey, A. Spitzer, R. ClarkABS 8. PERINATAL STROKE: A LEADING CAUSE OF SEIZURES IN THE NEONATAL PERIOD. 4 YEAR EXPERIENCE IN A TERTIARY NEONATAL INTENSIVE CARE UNIT • P. Mikrou, S. Hands, E. Mawondo, S.V. Rasiah, M. BorooahABS 9. CARRIER SCREENING FOR FRAGILE X SYNDROME IN TAIWAN FROM 2013 TO 2015 • W.C. Yang, C.C. Hung, Y.N. Su, P.N. TsaoABS 10. LENTICULOSTRIATE VASCULOPATHY IN NEONATES: CASES SERIES REPORT • M.P. Priego-Ruiz, D. Trassierra-Molina, M.P. Jaraba-Caballero, M.D. Ordóñez-Díaz, I.M. Tofé-ValeraABS 11. CONGENITAL HYDROCEPHALUS SECONDARY TO ARACHNOID CYST: CASE REPORT • M.P. Priego-Ruiz, I.M. Tofé-Valera, N

  1. Biomimetic matrices for pelvic floor repair

    NARCIS (Netherlands)

    Vashaghian, M.

    2017-01-01

    Pelvic organ prolapsed (POP) is a dysfunctional disease in female pelvic floor that affects a lot of women worldwide, and reduces their quality of life. Currently, trans-vaginal knitted polypropylene meshes are used as secondary treatment, for anatomical correction of the dysfunctional tissues.

  2. Pelvic floor electrophysiology patterns associated with faecal ...

    African Journals Online (AJOL)

    Hussein Al-Moghazy Sultan

    2012-12-28

    Dec 28, 2012 ... a Physical Medicine, Rheumatology and Rehabilitation Department, Faculty of Medicine, University of Alexandria, Egypt ... Aim: The present study was conducted to determine the patterns of pelvic floor electrophysiology that are associated ..... decision of the appropriate therapy whether conservative or.

  3. Fire resistance of slim floor beams

    NARCIS (Netherlands)

    Fellinger, J.H.H.; Twilt, L.

    1996-01-01

    Slim floor beams support decks on a wide plate welded on the lower flange of an 1- shaped beam. The air gap between the plate and the lower flange increases the fire resistance of the beam. A Finite Element Method (FEM) model, validated with three fire tests, is used to set up simple calculation

  4. Timber-concrete composite floor systems

    NARCIS (Netherlands)

    Linden, M.L.R. van der; Blass, H.J.

    1996-01-01

    Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are a simple and practical solution, they are not widely adopted. One of the reasons for this is the lack of uniform design mies. In this research programme shear tests on four different

  5. Organizational Learning in Shop Floor Level

    Science.gov (United States)

    Cheung, Che Keung; Geng, Shuang; Chuah, Kong Bieng; Chau, Yiu Chung; Kwong, Kar Fai

    2016-01-01

    Purpose: This paper aims to present the result of the pilot run of a research project which aims at evaluating the applicability of project-based action learning (PAL) to shop floor organizational learning (OL) component in a manufacturing company in Dongguan, China. How the PAL framework was introduced and implemented is described. The factors…

  6. Modal analysis for floors in lightweight buildings

    DEFF Research Database (Denmark)

    Sjökvist, Lars-Göran; Brunskog, Jonas

    2007-01-01

    constructions usually consist of plates that are stiffened by beams and by the dividing walls. In this study the wave equation for a plate is expanded by Fourier series and an analytical solution in terms of the eigenmodes of the entire system is presented. The studied system consists of one lightweigt floor...

  7. Seeing Results in Flooring for Schools

    Science.gov (United States)

    Simmons, Brian

    2011-01-01

    Operations staffs at education facilities of all sizes are tasked with selecting a hard floor cleaning program that is cost-effective, efficient and highly productive. With an increased focus on the sustainability of an environment, facility managers also must select a program that meets sustainability goals while maintaining a healthful, safe…

  8. Pelvic floor dyssynergia: efficacy of biofeedback training.

    Science.gov (United States)

    Gadel Hak, Nabil; El-Hemaly, Mohamed; Hamdy, Emad; El-Raouf, Ahmed Abd; Atef, Ehab; Salah, Tarek; El-Hanafy, Ehab; Sultan, Ahmad; Haleem, Magdy; Hamed, Hala

    2011-03-01

    Paradoxical contraction of the pelvic floor during attempts to defaecate is described as pelvic floor dyssynergia (anismus). It is a behavioural disorder (no associated morphological or neurological abnormalities); consequently, biofeedback training has been recommended as a behavioural therapy for such a disorder. The aim of the present study was to evaluate long-term satisfaction of patients diagnosed with pelvic floor dyssynergia after biofeedback. Sixty patients (35 females and 25 males) with a mean age of 30±12years and a 4year duration of constipation were included. Forty-five patients had normal colonic transit and 15 patients had slow colonic transit. History, physical examination and barium enema were done to exclude constipation secondary to organic causes. Colonic and pelvic floor functions (colon-transit time, anorectal manometry, EMG and defaecography) were performed before and after biofeedback treatments. Patients were treated on a weekly basis with an average of (6±2) sessions. At the end of sessions, 55 out of 60 patients (91.6%) reported a subjectively overall improvement. Symptoms of dyschezia were reported less frequently after biofeedback. Age and gender were not predictive factors of outcome. No symptoms at initial assessment were predictive for patient's satisfaction but the only factor of predictive value was the diagnosis of anismus and the motivated patient who wanted to continue the sessions. Biofeedback remains a morbidity free, low-cost and effective outpatient therapy for well-motivated patients complaining of functional constipation and diagnosed as pelvic floor dyssynergia. Copyright © 2011 Arab Journal of Gastroenterology. Published by Elsevier Ltd. All rights reserved.

  9. Functional imaging of the pelvic floor

    Energy Technology Data Exchange (ETDEWEB)

    Lienemann, Andreas E-mail: andreaslienemann@web.de; Fischer, Tanja

    2003-08-01

    Introduction/Objective: Pelvic floor dysfunction and associated pelvic organ prolapse represent a major problem in our present-day society, mostly afflicting parous women. Magnetic resonance imaging (MRI) is assuming an increasingly important role in the more accurate delineation of the extent of the problem. This article briefly reviews one of the main radiological methods for the dynamic evaluation of the pelvic floor: functional cine MRI. Methods and Material: Out of the literature the smallest common denominator for functional cine MRI can be defined as follows: high field system; patient either in supine or sitting position; fast gradient echo sequence; midsagittal slice orientation; either a stack of slices or repeated measurements at the same slice position with the patient at rest or straining; image analysis using the pubococcygeal reference line. Results: All except two publications stress the usefulness of functional cine MRI in the evaluation of patients with organ descent and prolapse. This well accepted method allows for the visualization of all relevant structures in the anterior, middle and posterior compartment. It is especially useful in the detection of enteroceles, and provides a reliable postoperative follow-up tool. Isolated urinary or stool incontinence are not an indication for functional cine MRI, as is the case in patients with equivocal clinical findings. To date it does not allow for real 3D imaging of the pelvic floor or sufficient determination of fascial defects. Discussion: Functional cine MRI of the pelvic floor is a promising new imaging method for the detection of organ descent and prolapse in patients with equivocal clinical findings. The combination of function and morphology allows for an innovative view of the pelvic floor, and thus adds to our understanding of the various interactions of the structures.

  10. Aeroelasticity of morphing wings using neural networks

    Science.gov (United States)

    Natarajan, Anand

    In this dissertation, neural networks are designed to effectively model static non-linear aeroelastic problems in adaptive structures and linear dynamic aeroelastic systems with time varying stiffness. The use of adaptive materials in aircraft wings allows for the change of the contour or the configuration of a wing (morphing) in flight. The use of smart materials, to accomplish these deformations, can imply that the stiffness of the wing with a morphing contour changes as the contour changes. For a rapidly oscillating body in a fluid field, continuously adapting structural parameters may render the wing to behave as a time variant system. Even the internal spars/ribs of the aircraft wing which define the wing stiffness can be made adaptive, that is, their stiffness can be made to vary with time. The immediate effect on the structural dynamics of the wing, is that, the wing motion is governed by a differential equation with time varying coefficients. The study of this concept of a time varying torsional stiffness, made possible by the use of active materials and adaptive spars, in the dynamic aeroelastic behavior of an adaptable airfoil is performed here. Another type of aeroelastic problem of an adaptive structure that is investigated here, is the shape control of an adaptive bump situated on the leading edge of an airfoil. Such a bump is useful in achieving flow separation control for lateral directional maneuverability of the aircraft. Since actuators are being used to create this bump on the wing surface, the energy required to do so needs to be minimized. The adverse pressure drag as a result of this bump needs to be controlled so that the loss in lift over the wing is made minimal. The design of such a "spoiler bump" on the surface of the airfoil is an optimization problem of maximizing pressure drag due to flow separation while minimizing the loss in lift and energy required to deform the bump. One neural network is trained using the CFD code FLUENT to

  11. Hovering hummingbird wing aerodynamics during the annual cycle. I. Complete wing.

    Science.gov (United States)

    Achache, Yonathan; Sapir, Nir; Elimelech, Yossef

    2017-08-01

    The diverse hummingbird family (Trochilidae) has unique adaptations for nectarivory, among which is the ability to sustain hover-feeding. As hummingbirds mainly feed while hovering, it is crucial to maintain this ability throughout the annual cycle-especially during flight-feather moult, in which wing area is reduced. To quantify the aerodynamic characteristics and flow mechanisms of a hummingbird wing throughout the annual cycle, time-accurate aerodynamic loads and flow field measurements were correlated over a dynamically scaled wing model of Anna's hummingbird ( Calypte anna ). We present measurements recorded over a model of a complete wing to evaluate the baseline aerodynamic characteristics and flow mechanisms. We found that the vorticity concentration that had developed from the wing's leading-edge differs from the attached vorticity structure that was typically found over insects' wings; firstly, it is more elongated along the wing chord, and secondly, it encounters high levels of fluctuations rather than a steady vortex. Lift characteristics resemble those of insects; however, a 20% increase in the lift-to-torque ratio was obtained for the hummingbird wing model. Time-accurate aerodynamic loads were also used to evaluate the time-evolution of the specific power required from the flight muscles, and the overall wingbeat power requirements nicely matched previous studies.

  12. PREFACE: MEM11: The 6th International Workshop on Mechanical-Electromagnetic Properties of Composite Superconductors (Okinawa, Japan, 5-7 December 2011) MEM11: The 6th International Workshop on Mechanical-Electromagnetic Properties of Composite Superconductors (Okinawa, Japan, 5-7 December 2011)

    Science.gov (United States)

    Awaji, Satoshi; Osamura, Kozo; Hampshire, Damian

    2012-05-01

    The effect of stress and strain on the electromagnetic properties of superconducting composite conductors is one of the key issues for the practical application of superconductivity. To discuss these subjects thoroughly, the International Workshop on Mechanical-Electromagnetic Properties of Composite Superconductors (MEM) has been held regularly since 2001. The 6th workshop (MEM11) was held in Okinawa, Japan in 2011, which was the centennial of the discovery of superconductivity by Professor Kamerlingh Onnes, as well as the 25th anniversary of the discovery of high temperature superconductors (HTS). Although it was originally planned that MEM11 be held in Mito, the workshop venue was changed because of the serious disaster in the north of Japan on 11 March 2011. Sixty five scientists participated in this specialized workshop. Fifty six papers were presented in the following six sessions: (1) Intrinsic strain effects on low temperature superconductors (LTS) and HTS, (2) The International Thermonuclear Experimental Reactor (ITER), (3) Strain evaluation by quantum beams, (4) Flux pinning properties of HTS, (5) Standardization and the Versailles Project on Advanced Materials and Standards (VAMAS) and (6) High field magnets. Several large topics were presented and discussed at the workshop: the important progress in methods for non-invasive measurements of the local strain exerted on the superconducting components in superconducting wires and cables using quantum beam techniques. This approach provides powerful tools for investigating the effect of strain in composite superconductors; the intrinsic strain effects in LTS and HTS in the reversible strain region. Recently, it has become easier to determine quantitatively the strain dependence of critical current when the local strain is measured directly, and the mechanical and electromagnetic properties of the superconductors used in the ITER tokamak. This was a major topic at the workshop since the superconducting

  13. Severe bleeding after sinus floor elevation using the transcrestal technique

    DEFF Research Database (Denmark)

    Jensen, Simon Storgard; Eriksen, Jacob; Schiodt, Morten

    2012-01-01

    To present a rare but clinically significant complication to sinus floor elevation (SFE) using the transcrestal technique.......To present a rare but clinically significant complication to sinus floor elevation (SFE) using the transcrestal technique....

  14. Assessment of pelvic floor dysfunctions using dynamic magnetic resonance imaging

    Directory of Open Access Journals (Sweden)

    Hoda Salah Darwish

    2014-03-01

    Conclusion: Dynamic MRI is an ideal, non invasive technique which does not require patient preparation for evaluation of pelvic floor. It acts as one stop shop for diagnosing single or multiple pelvic compartment involvement in patients with pelvic floor dysfunction.

  15. [Physiotherapy of pelvic floor for incontinence].

    Science.gov (United States)

    Galeri, S; Sottini, C

    2001-09-01

    The rate of urinary incontinence after prostatectomy, as reported in several studies, varies between 0 and 88%. In the last years, pelvic floor rehabilitation in the women stress incontinence has been strengthened, with a great amount of clinical studies and results. Recently, the rehabilitation treatment has been studied in men who underwent a radical prostatectomy. The Cochrane Database of Systematic Reviews recently published the "Conservative management for post prostatectomy incontinence". The aim of this study was to determine the effects of conservative management in post prostatectomy urinary incontinence. Randomized or almost-randomized trials were analyzed up to January 1999; five studies were included, with the following results: 1. Pelvic floor muscle training versus no active treatment. Two trials compared pelvic floor muscle training with patients in a control group. In both groups there was a clinical improvement, especially in the first months after prostatectomy. The results of the two studies suggest a benefit in the treated group, even if not statistically significant, mainly in the first months after surgery. 2. Pelvic floor muscle training + biofeedback versus no active treatment. The treated group regained continence in shorter time, with decrease of incontinence episodes, of urinary frequency, of the quantity of urine loss; these data were not statistically significant. 3. Pelvic floor muscle training + rectal electrical stimulation versus no active treatment No detectable differences among the two groups, either in number of men still incontinent, and in Pad-test results. 4. Pelvic floor muscle training + rectal electrical stimulation + biofeedback versus no active treatment. Pad-test evaluation was similar in the treated and in the control group; no other outcomes were described. 5. Pelvic floor muscle training + rectal electrical stimulation versus pelvic floor muscle training. There was a progressive improvement in three months of

  16. Knowledge of the pelvic floor in nulliparous women

    OpenAIRE

    Neels, Hedwig; Wyndaele, Jean-Jacques; Tjalma, Wiebren A. A.; De Wachter, Stefan; Wyndaele, Michel; Vermandel, Alexandra

    2016-01-01

    [Purpose] Proper pelvic floor function is important to avoid serious dysfunctions including incontinence, prolapse, and sexual problems. The current study evaluated the knowledge of young nulliparous women about their pelvic floor and identified what additional information they wanted. [Subjects and Methods] In this cross-sectional survey, a validated, 36 item questionnaire was distributed to 212 nulliparous women. The questionnaire addressed demography, pelvic floor muscles, pelvic floor dys...

  17. Recognition and Management of Nonrelaxing Pelvic Floor Dysfunction

    OpenAIRE

    Faubion, Stephanie S.; Shuster, Lynne T.; Bharucha, Adil E.

    2012-01-01

    Nonrelaxing pelvic floor dysfunction is not widely recognized. Unlike in pelvic floor disorders caused by relaxed muscles (eg, pelvic organ prolapse or urinary incontinence, both of which often are identified readily), women affected by nonrelaxing pelvic floor dysfunction may present with a broad range of nonspecific symptoms. These may include pain and problems with defecation, urination, and sexual function, which require relaxation and coordination of pelvic floor muscles and urinary and ...

  18. Mapping of multi-floor buildings: A barometric approach

    DEFF Research Database (Denmark)

    Özkil, Ali Gürcan; Fan, Zhun; Xiao, Jizhong

    2011-01-01

    This paper presents a new method for mapping multi5floor buildings. The method combines laser range sensor for metric mapping and barometric pressure sensor for detecting floor transitions and map segmentation. We exploit the fact that the barometric pressure is a function of the elevation......, and it varies between different floors. The method is tested with a real robot in a typical indoor environment, and the results show that physically consistent multi5floor representations are achievable....

  19. The effects of wing flexibility on the flight performance and stability of flapping wing micro air vehicles

    Science.gov (United States)

    Bluman, James Edward

    Insect wings are flexible. However, the influence of wing flexibility on the flight dynamics of insects and flapping wing micro air vehicles is unknown. Most studies in the literature consider rigid wings and conclude that the hover equilibrium is unstable. This dissertation shows that a flapping wing flyer with flexible wings exhibits stable natural modes of the open loop system in hover, never reported before. The free-flight insect flight dynamics is modeled for both flexible and rigid wings. Wing mass and inertia are included in the nonlinear equations of motion. The flapping wing aerodynamics are modeled using a quasi-steady model, a well-validated two dimensional Navier Stokes model, and a coupled, two dimensional Navier Stokes - Euler Bernoulli beam model that accurately models the fluid-structure interaction of flexible wings. Hover equilibrium is systematically and efficiently determined with a coupled quasi-steady and Navier-Stokes equation trimmer. The power and stability are reported at hover while parametrically varying the pitch axis location for rigid wings and the structural stiffness for flexible wings. The results indicate that the rigid wings possess an unstable oscillatory mode mainly due to their pitch sensitivity to horizontal velocity perturbations. The flexible wings stabilize this mode primarily by adjusting their wing shape in the presence of perturbations. The wing's response to perturbations generates significantly more horizontal velocity damping and pitch rate damping than in rigid wings. Furthermore, the flexible wings experience substantially less wing wake interaction, which, for rigid wings, is destabilizing. The power required to hover a fruit fly with actively rotating rigid wings varies between 16.9 and 34.2 W/kg. The optimal power occurs when the pitch axis is located at 30% chord, similar to some biological observations. Flexible wings require 23.1 to 38.5 W/kg. However, flexible wings exhibit more stable system dynamics and

  20. Special aspects of attic floor warming in historic buildings

    Directory of Open Access Journals (Sweden)

    Murgul Vera

    2017-01-01

    Full Text Available This article containsreasoningof the heat transfer performance uniformity factor determination for attic floors of historic residential buildings while energy effective modifying buildings. The numeral value of this heat transfer performance uniformity factor for the wooden attic floor structure was founddurung investigation. It was estimated that there was no moisture condensation in the wooden attic floor structure.

  1. 26 CFR 52.4682-4 - Floor stocks tax.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 17 2010-04-01 2010-04-01 false Floor stocks tax. 52.4682-4 Section 52.4682-4... TAXES (CONTINUED) ENVIRONMENTAL TAXES § 52.4682-4 Floor stocks tax. (a) Overview. This section provides rules for identifying ozone-depleting chemicals (ODCs) that are subject to the floor stocks tax imposed...

  2. Efficacy of biofeedback-assisted pelvic floor muscle training in ...

    African Journals Online (AJOL)

    Ibrahim Khalil Ibrahim

    2014-07-18

    Jul 18, 2014 ... Pelvic floor dysfunction;. Pelvic floor electrophysiology. Abstract Background: Stress urinary incontinence (SUI), fecal incontinence (FI) and/or pelvic ... Pelvic floor muscle training (PFMT) is the first-line therapy in the treatment of PFD either .... PFD attending the outpatient clinic at the Physical Medicine,.

  3. Floor Vibrations - as Induced and Reduced by Humans

    DEFF Research Database (Denmark)

    Pedersen, Lars

    . As for dynamic loads focus is placed on heel impact excitation and actions of jumping people causing floor vibrations. As for interaction between stationary humans and the vibrating floor focus is on modelling humans as oscillating spring-mass-damper systems attached to the floor rather than as simple added mass...

  4. Flooring-systems and their interaction with furniture and humans

    DEFF Research Database (Denmark)

    Frier, Christian; Pedersen, Lars; Andersen, Lars Vabbersgaard

    2017-01-01

    of computations. Passive humans and/or furniture are often present on a floor. Typically, these masses and their way of interacting with the floor mass are ignored in predictions of vibrational behaviour of the flooring system. Utilizing a shell finite-element model, the paper explores and quantifies how non...

  5. Efficacy of biofeedback-assisted pelvic floor muscle training in ...

    African Journals Online (AJOL)

    Background: Stress urinary incontinence (SUI), fecal incontinence (FI) and/or pelvic floor dyssynergia, with pelvic organ prolapse (POP) are described as pelvic floor dysfunction (PFD). Pelvic floor muscle training (PFMT) is the first-line therapy in the treatment of PFD either alone or combined with biofeedback assisted pelvic ...

  6. Pelvic floor function during and after first pregnancy

    NARCIS (Netherlands)

    Brummen, H.J. van

    2006-01-01

    This study evaluated the effects the first pregnancy and childbirth on the pelvic floor. Pregnancy and vaginal delivery can negatively affect pelvic floor function. Micturition symptoms, defecation symptoms and sexual dysfunction are all signs of an impaired pelvic floor function. These symptoms are

  7. 27 CFR 46.233 - Payment of floor stocks tax.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Payment of floor stocks... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax. (a...

  8. 27 CFR 46.221 - Floor stocks tax rates.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Floor stocks tax rates. 46... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Tax Liability Calculation § 46.221 Floor stocks tax rates. Product...

  9. 27 CFR 46.231 - Floor stocks tax return.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Floor stocks tax return... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.231 Floor stocks tax return. Form 5000...

  10. 27 CFR 46.195 - Floor stocks requirements.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Floor stocks requirements... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 General § 46.195 Floor stocks requirements. (a) Take inventory. The...

  11. 49 CFR 38.79 - Floors, steps and thresholds.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Floors, steps and thresholds. 38.79 Section 38.79 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Light Rail Vehicles and Systems § 38.79 Floors, steps and thresholds. (a) Floor surfaces on aisle...

  12. Assessment of radiological status of underground tunnel of radiochemistry wing

    International Nuclear Information System (INIS)

    Patre, D.K.; Thanamani, S.; Ojha, Shashikala; Murali, S.

    2012-01-01

    Radiochemistry Wing, RLG has design based safety systems for lab exhaust and glove box ventilation exhaust. The respective exhaust headers are routed from the lab exhaust point to the filter house. The concretized underground tunnel runs between Radiochemistry wing, RLG and Filter house about 100 m away. It houses the main exhaust tunnel made of MS, has reportedly developed leakage in the MS lines of exhaust due to ageing. It was indicated by the inadequate ventilation to the lab exhaust which reduced ∼ 10 % of the total exhaust. It was decided to carry out the replacement of main exhaust duct subject to radiological safety and clearance from the regulatory agencies. Since the duct had been in use since past 40 years, HP assessment on contamination status, clearance from local safety committee and related regulatory agency are mandatory. In view of the same, the study on radiological parameters was taken up and the paper describes the results of our radiological surveillance. Proposed replacement work involves approximately estimated surface area of duct as 520 m 2 , volume of the material as 106 m 3 and the weight of material of exhaust duct as 12.5 tons. Underground tunnel of radiochemistry wing consists of 3 main segments. It was monitored thoroughly by radiation survey. Spot air sample was collected during the radiological survey. Around 200 swipes were taken from various portions of the segments and the effluent pipelines. Last two tunnel segment were not approachable. Smear swipes were taken from top, side, bottom and floor of each segment. Calibrated scintillation counters were used for assessment of μ air activity and μ contamination check. Spot air samples were taken during different operations showed no activity. Dose rate in the tunnel was found to be less than 1 μSv/h (0.1 mR/h). The μ contamination levels were found in increasing order from the first segment to the last segment. (0.05 - 0.1 Bq/cm 2 ). Effluent pipelines were found to have

  13. [Wing 1 radiation survey and contamination report

    International Nuclear Information System (INIS)

    Olsen, K.

    1991-01-01

    We have completed the 5480.11 survey for Wing 1. All area(s)/item(s) requested by the 5480.11 committee have been thoroughly surveyed and documented. Decontamination/disposal of contaminated items has been accomplished. The wing 1 survey was started on 8/13/90 and completed 9/18/90. However, the follow-up surveys were not completed until 2/18/91. We received the final set of smear samples for wing 1 on 1/13/91. A total of 5,495 smears were taken from wing 1 and total of 465 smears were taken during the follow-up surveys. There were a total 122 items found to have fixed contamination and 4 items with smearable contamination in excess of the limits specified in DOE ORDER 5480.11 (AR 3-7). The following area(s)/item(s) were not included in the 5480.11 survey: Hallways, Access panels, Men's and women's change rooms, Janitor closets, Wall lockers and item(s) stored in wing 1 hallways and room 1116. If our contract is renewed, we will include those areas in our survey according to your request of April 15, 1991

  14. Flapping wing aerodynamics: from insects to vertebrates.

    Science.gov (United States)

    Chin, Diana D; Lentink, David

    2016-04-01

    More than a million insects and approximately 11,000 vertebrates utilize flapping wings to fly. However, flapping flight has only been studied in a few of these species, so many challenges remain in understanding this form of locomotion. Five key aerodynamic mechanisms have been identified for insect flight. Among these is the leading edge vortex, which is a convergent solution to avoid stall for insects, bats and birds. The roles of the other mechanisms - added mass, clap and fling, rotational circulation and wing-wake interactions - have not yet been thoroughly studied in the context of vertebrate flight. Further challenges to understanding bat and bird flight are posed by the complex, dynamic wing morphologies of these species and the more turbulent airflow generated by their wings compared with that observed during insect flight. Nevertheless, three dimensionless numbers that combine key flow, morphological and kinematic parameters - the Reynolds number, Rossby number and advance ratio - govern flapping wing aerodynamics for both insects and vertebrates. These numbers can thus be used to organize an integrative framework for studying and comparing animal flapping flight. Here, we provide a roadmap for developing such a framework, highlighting the aerodynamic mechanisms that remain to be quantified and compared across species. Ultimately, incorporating complex flight maneuvers, environmental effects and developmental stages into this framework will also be essential to advancing our understanding of the biomechanics, movement ecology and evolution of animal flight. © 2016. Published by The Company of Biologists Ltd.

  15. Principle of bio-inspired insect wing rotational hinge design

    Science.gov (United States)

    Fei, Fan

    A principle for designing and fabricating bio-inspired miniature artificial insect flapping wing using flexure rotational hinge design is presented. A systematic approach of selecting rotational hinge stiffness value is proposed. Based on the understanding of flapping wing aerodynamics, a dynamic simulation is constructed using the established quasi-steady model and the wing design. Simulations were performed to gain insight on how different parameters affect the wing rotational response. Based on system resonance a model to predict the optimal rotational hinge stiffness based on given wing parameter and flapping wing kinematic is proposed. By varying different wing parameters, the proposed method is shown to be applicable to a wide range of wing designs with different sizes and shapes. With the selected hinge stiffness value, aspects of the rotational joint design is discussed and an integrated wing-hinge structure design using laminated carbon fiber and polymer film is presented. Manufacturing process of such composite structure is developed to achieve high accuracy and repeatability. The yielded hinge stiffness is verified by measurements. To validate the proposed model, flapping wing experiments were conducted. A flapping actuation set up is built using DC motor and a controller is implemented on a microcontroller to track desired wing stroke kinematic. Wing stroke and rotation kinematic were extracted using a high speed camera and the lift generation is evaluated. A total of 49 flapping experiments were presented, experimental data shows good correlation with the model's prediction. With the wing rotational hinge stiffness designed so that the rotational resonant frequency is twice as the stroke frequency, the resulting wing rotation generates near optimal lift. With further simulation, the proposed model shows low sensitivity to wing parameter variation. As a result, giving a design parameter of a flapping wing robot platform, the proposed principle can

  16. Gliding swifts attain laminar flow over rough wings.

    Directory of Open Access Journals (Sweden)

    David Lentink

    Full Text Available Swifts are among the most aerodynamically refined gliding birds. However, the overlapping vanes and protruding shafts of their primary feathers make swift wings remarkably rough for their size. Wing roughness height is 1-2% of chord length on the upper surface--10,000 times rougher than sailplane wings. Sailplanes depend on extreme wing smoothness to increase the area of laminar flow on the wing surface and minimize drag for extended glides. To understand why the swift does not rely on smooth wings, we used a stethoscope to map laminar flow over preserved wings in a low-turbulence wind tunnel. By combining laminar area, lift, and drag measurements, we show that average area of laminar flow on swift wings is 69% (n = 3; std 13% of their total area during glides that maximize flight distance and duration--similar to high-performance sailplanes. Our aerodynamic analysis indicates that swifts attain laminar flow over their rough wings because their wing size is comparable to the distance the air travels (after a roughness-induced perturbation before it transitions from laminar to turbulent. To interpret the function of swift wing roughness, we simulated its effect on smooth model wings using physical models. This manipulation shows that laminar flow is reduced and drag increased at high speeds. At the speeds at which swifts cruise, however, swift-like roughness prolongs laminar flow and reduces drag. This feature gives small birds with rudimentary wings an edge during the evolution of glide performance.

  17. RFID Data Cleaning for Shop Floor Applications

    Science.gov (United States)

    Ziekow, Holger; Ivantysynova, Lenka; Günter, Oliver

    In several case studies we found that shop-floor applications in manufacturing pose special challenges to cleaning RFID data. The underlying problem in many scenarios is the uncertainty about the exact location of observed RFID tags. Simple filter s provided in common middleware solutions do not cope well with these challenges. Therefore we have developed an approach based on maximum-likelihood estimation to infer a tag's location within the reader range. This enables improved RFID data cleaning in a number of application scenarios. We stress the benefits of our approach along exemplary application scenarios that we found in manufacturing. In simulations and experiments with real world data we show that our approach outperforms existing solutions. Our approach can extend RFID middleware or reader firmware, to improve the use of RFID in a range of shop-floor applications.

  18. Development of remote operated floor contamination monitor

    International Nuclear Information System (INIS)

    Sreekumar, K.; Gangamohan, M.; Kannan, R.K.; Rajan, S.

    2005-01-01

    Contamination check of floors and walkways in and around Reactor building areas forms an integral part of Radiation Protection Program in Power Stations. Though random swipe check method is adopted for the detection of loose contamination, this method has the disadvantage of leaving the fixed contamination and hotspots undetected. Hence, scanning the area with a sensitive detector, held close to the surface provides positive means for the detection of contamination. Checking large areas and walkways by holding the detector close to the surface involves physical work. Also, areas which are unapproachable due to congestion of equipment, may go uncovered by contamination monitoring in order to eliminate the physical strain involved in such contamination monitoring and to cover unapproachable areas, a small size prototype device that can be operated remotely was fabricated. This device detects contamination instantaneously and accurately. This paper describes design and fabrication of the device used for floor contamination monitoring. (author)

  19. Biomimetic matrices for pelvic floor repair

    OpenAIRE

    Vashaghian, M.

    2017-01-01

    Pelvic organ prolapsed (POP) is a dysfunctional disease in female pelvic floor that affects a lot of women worldwide, and reduces their quality of life. Currently, trans-vaginal knitted polypropylene meshes are used as secondary treatment, for anatomical correction of the dysfunctional tissues. However, the meshes can create sever adverse complications in some patients, such as chronic pain and dypareunia, in longer-term. In the hope of finding an alternative surgical treatment, we developed ...

  20. Orbital floor dermoid: An unusual presentation

    Directory of Open Access Journals (Sweden)

    Yeola Meenakshi

    2009-01-01

    Full Text Available Dermoid cysts are developmental abnormal arrangement of tissues and are often evident soon after birth. Its occurrence in the orbit is relatively rare. We report a case of orbital floor dermoid in an 18-year-old female patient who presented with progressive, painless swelling in the lower eyelid associated with mild proptosis of three months duration. The lesion was excised completely, and histopathology confirmed the diagnosis of dermoid cyst.

  1. Ocean floor mounting of wave energy converters

    Science.gov (United States)

    Siegel, Stefan G

    2015-01-20

    A system for mounting a set of wave energy converters in the ocean includes a pole attached to a floor of an ocean and a slider mounted on the pole in a manner that permits the slider to move vertically along the pole and rotate about the pole. The wave energy converters can then be mounted on the slider to allow adjustment of the depth and orientation of the wave energy converters.

  2. Understanding gaming floor influences on player behaviour

    OpenAIRE

    Griffiths, MD

    2009-01-01

    Efforts to entice and retain player activity within a casino gaming environment require bringing to bear a range of sensory and physical influences. The challenge is to accomplish the operators’ objectives while at the same time ensuring any potential negative effects on the player are minimised. How casinos keep this in balance is at the heart of how the gaming floor works, and assessing such matters is becoming a necessary part of social responsibility.

  3. EDITORIAL: Proceedings of the 6th Edoardo Amaldi Conference on Gravitational Waves, Bankoku Shinryoukan, Okinawa, Japan, 20-24 June 2005 Proceedings of the 6th Edoardo Amaldi Conference on Gravitational Waves, Bankoku Shinryoukan, Okinawa, Japan, 20-24 June 2005

    Science.gov (United States)

    Mio, N.

    2006-04-01

    This issue is published as the Proceedings of the 6th Edoardo Amaldi Conference on Gravitational Waves, held on 20-24 June 2005 at Bankoku Shinryoukan in Okinawa, Japan. Since the first Amaldi conference was held in Frascati in 1994, eleven years have passed and the scale of the conference has grown with the increasing activity in the field of gravitational waves. As the centenary celebration of Einstein's 'miracle year', 2005 was called 'World Year of Physics'. Among his breakthroughs published in 1905, the special theory of relativity is recognized as the most significant revolution in physics, completely changing our views concerning time and space. Ten years later, Einstein proposed the general theory of relativity, by which he predicted the existence of gravitational waves (GWs). At that time, it was only a dream to observe a GW because its effect was so small. Efforts to detect GWs, pioneered by Weber, have continued for almost 40 years, yet their detection remained a dream. However, the presentations at this conference have convinced us that it is no longer a dream. The GW detector projects have made extraordinary advances; in particular, the significant sensitivity improvement of LIGO and the completion of the VIRGO detector mark the beginning of the new era of GW physics. Firm developments in theories and source estimations were also reported. In particular, the data analysis session was very active and various discussions were held. Elaborate experimental techniques were presented, some of them already achieving the requirements for the next generation of detectors, such as Advanced LIGO and LCGT. In addition to the earth-based detectors, many presentations concerning space detectors were contributed; they indicated that space would become the new stage for GW physics and astronomy. This issue brings together the papers which were presented at this exciting conference. The proceedings comprise two volumes; the largest part is published as a volume of

  4. Reconstruction of Orbital Floor With Auricular Concha.

    Science.gov (United States)

    Seven, Ergin; Tellioglu, Ali Teoman; Inozu, Emre; Ozakpinar, Hulda Rifat; Horoz, Ugur; Eryilmaz, Avni Tolga; Karamursel, Sebat

    2017-10-01

    Orbital floor fractures of varying sizes commonly occur after orbital injuries and remain a serious challenge. Serious complications of such fractures include enopthalmos, restriction of extraocular movement, and diplopia. There is a dearth of literature that can be applied widely, easily, and successfully in all such situations, and therefore there is no consensus on the treatment protocol of this pathology yet. Autogenous grafts and alloplastic and allogenic materials with a wide variety of advantages and disadvantages have been discussed. The value of preoperative and postoperative ophthalmological examination should be standard of care in all orbital fracture patients. An ideal reconstructed orbital floor fracture should accelerate the restoration of orbital function with acceptable cosmetic results. Management parameters of orbital fractures such as timing of surgery, incision type, and implant materials, though widely discussed, remain controversial. In this study, 55 patients with orbital floor fractures surgically reconstructed with conchal cartilage grafts between 2008 and 2014 were retrospectively evaluated. Complications and long-time follow-up visit results have been reported with clinical and radiographic findings. The aim of this study was to present the authors' clinical experiences of reconstruction of blow-out fractures with auricular conchal graft and to evaluate the other materials available for use.

  5. The role of wing kinematics of freely flying birds downstream the wake of flapping wings

    Science.gov (United States)

    Krishnan, Krishnamoorthy; Gurka, Roi

    2016-11-01

    Avian aerodynamics has been a topic of research for centuries. Avian flight features such as flapping, morphing and maneuvering make bird aerodynamics a complex system to study, analyze and understand. Aerodynamic performance of the flapping wings can be quantified by measuring the vortex structures present in the downstream wake. Still, the direct correlation between the flapping wing kinematics and the evolution of wake features need to be established. In this present study, near wake of three bird species (western sandpiper, European starling and American robin) have been measured experimentally. Long duration, time-resolved, particle image velocimetry technique has been used to capture the wake properties. Simultaneously, the bird kinematics have been captured using high speed camera. Wake structures are reconstructed from the collected PIV images for long chord distances downstream. Wake vorticities and circulation are expressed in the wake composites. Comparison of the wake features of the three birds shows similarities and some key differences are also found. Wing tip motions of the birds are extracted for four continuous wing beat cycle to analyze the wing kinematics. Kinematic parameters of all the three birds are compared to each other and similar trends exhibited by all the birds have been observed. A correlation between the wake evolutions with the wing motion is presented. It was found that the wings' motion generates unique flow patterns at the near wake, especially at the transition phases. At these locations, a drastic change in the circulation was observed.

  6. Investigating the Force Production of Functionally-Graded Flexible Wings in Flapping Wing Flight

    Science.gov (United States)

    Mudbhari, Durlav; Erdogan, Malcolm; He, Kai; Bateman, Daniel; Lipkis, Rory; Moored, Keith

    2015-11-01

    Birds, insects and bats oscillate their wings to propel themselves over long distances and to maneuver with unprecedented agility. A key element to achieve their impressive aerodynamic performance is the flexibility of their wings. Numerous studies have shown that homogeneously flexible wings can enhance force production, propulsive efficiency and lift efficiency. Yet, animal wings are not homogenously flexible, but instead have varying material properties. The aim of this study is to characterize the force production and energetics of functionally-graded flexible wings. A partially-flexible wing composed of a rigid section and a flexible section is used as a first-order model of functionally-graded materials. The flexion occurs in the spanwise direction and it is affected by the spanwise flexion ratio, that is, the ratio of the length of the rigid section compared to the total span length. By varying the flexion ratio as well as the material properties of the flexible section, the study aims to examine the force production and energetics of flapping flight with functionally-graded flexible wings. Supported by the Office of Naval Research under Program Director Dr. Bob Brizzolara, MURI grant number N00014-14-1-0533.

  7. Aeroelastic Analysis of Modern Complex Wings

    Science.gov (United States)

    Kapania, Rakesh K.; Bhardwaj, Manoj K.; Reichenbach, Eric; Guruswamy, Guru P.

    1996-01-01

    A process is presented by which aeroelastic analysis is performed by using an advanced computational fluid dynamics (CFD) code coupled with an advanced computational structural dynamics (CSD) code. The process is demonstrated on an F/A-18 Stabilator using NASTD (an in-house McDonnell Douglas Aerospace East CFD code) coupled with NASTRAN. The process is also demonstrated on an aeroelastic research wing (ARW-2) using ENSAERO (an in-house NASA Ames Research Center CFD code) coupled with a finite element wing-box structures code. Good results have been obtained for the F/A-18 Stabilator while results for the ARW-2 supercritical wing are still being obtained.

  8. 40 CFR 427.70 - Applicability; description of the asbestos floor tile subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos floor tile subcategory. 427.70 Section 427.70 Protection of Environment ENVIRONMENTAL PROTECTION... Asbestos Floor Tile Subcategory § 427.70 Applicability; description of the asbestos floor tile subcategory... manufacture of asbestos floor tile. ...

  9. Active Twist Control for a Compliant Wing Structure, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Blended wing body (BWB) aircraft provide an aerodynamically superior solution over traditional tube-and-wing designs for a number of mission profiles. These...

  10. Fixed-Wing Micro Air Vehicles with Hovering Capabilities

    National Research Council Canada - National Science Library

    Bataille, Boris; Poinsot, Damien; Thipyopas, Chinnapat; Moschetta, Jean-Marc

    2007-01-01

    Fixed-wing micro air vehicles (MAV) are very attractive for outdoor surveillance missions since they generally offer better payload and endurance capabilities than rotorcraft or flapping-wing vehicles of equal size...

  11. Pelvic floor dysfunction in inflammatory bowel disease.

    Science.gov (United States)

    Bondurri, A; Maffioli, A; Danelli, P

    2015-12-01

    Advances in tailored medical therapy and introduction of biologic agents for inflammatory bowel disease (IBD) treatment have ensured long-term disease remission. Some patients, however, still report defecatory symptoms. Patients present with a wide spectrum of conditions - anal incontinence, obstructed defecation and pelvic pain among the most frequent - that have a great impact on their quality of life. Due to IBD diagnosis, little relevance is attributed to this type of symptoms and their epidemiologic distribution is unknown. Pathogenetic hypotheses are currently under investigation. Routine diagnostic workflow and therapeutic options in pelvic floor service are often underused. The evaluation of these disorders starts with an endoscopy to rule out ongoing disease; the following diagnostic workflow is the same as in patients without IBD. For fecal incontinence and obstructed defecation, simple conservative therapy with dietary modifications and appropriate fluid intake is effective in most cases. In non-responding patients, anorectal physiology tests and imaging are required to select patients for pelvic floor muscle training and biofeedback. These treatments have been proven effective in IBD patients. Some new minimally invasive alternative strategies are available for IBD patients, as sacral nerve and posterior tibial nerve stimulation; for other ones (e.g., bulking agent implantation) IBD still remains an exclusion criterion. In order to preserve anatomical areas that could be useful for future reconstructive techniques, surgical options to cure pelvic floor dysfunction are indicated only in a small group of IBD patients, due to the high risk of failure in wound healing and to the possible side effects of surgery, which can lead to anal incontinence or to a possible proctectomy. A particular issue among defecatory symptoms in patients with IBD is paradoxical puborectalis contraction after restorative proctocolectomy: if this disorder is properly diagnosed, a

  12. Nonlinear Dynamics of Wind Turbine Wings

    DEFF Research Database (Denmark)

    Larsen, Jesper Winther

    Wind turbines with a nominal effect of 5MW with a rotor diameter of up to 126m are produced today. With the increasing size wind turbines also become more and more optimized with respect to structural dimensions and material usage, without increasing the stiffness proportionally. Consequently......, large wind turbines become increasingly flexible and dynamically sensitive. This project focuses on the structural analysis of highly flexible wind turbine wings, and the aerodynamic loading of wind turbine wings under large changes in flow field due to elastic deformations and changing wind conditions....

  13. Stability and transition on swept wings

    Science.gov (United States)

    Stuckert, Greg; Herbert, Thorwald; Esfahanian, Vahid

    1993-01-01

    This paper describes the extension and application of the Parabolized Stability Equations (PSE) to the stability and transition of the supersonic three-dimensional laminar boundary layer on a swept wing. The problem formulation uses a general coordinate transformation for arbitrary curvilinear body-fitted computational grids. Some testing using these coordinates is briefly described to help validate the software used for the investigation. The disturbance amplitude ratios as a function of chord position for supersonic (Mach 1.5) boundary layers on untapered, untwisted wings of different sweep angles are then presented and compared with those obtained from local parallel analyses.

  14. Damage Considerations of a Flexible Micro Air Vehicle Wing Using 3-D Laser Vibrometry

    National Research Council Canada - National Science Library

    Mendoza, Jr, Leo L

    2007-01-01

    .... The flexible micro air vehicle wing studied was based on a University of Florida micro air vehicle wing design and was examined using measurements from the Polytec 400-3D Scanning Vibrometer. Comparisons of the wing?s natural frequencies and displacements were made between the wing?s undamaged and damaged states.

  15. Integrated multi-disciplinary design of a sailplane wing

    OpenAIRE

    Strauch, Gregory J.

    1985-01-01

    The objective of this research is to investigate the techniques and payoffs of integrated aircraft design. Lifting line theory and beam theory are used for the analysis of the aerodynamics and the structures of a composite sailplane wing. The wing is described by 33 - 34 design variables which involve the planform geometry, the twist distribution, and thicknesses of the spar caps, spar webs, and the skin at various stations along the wing. The wing design must satisfy 30 â ...

  16. Investigation of Floor Surface Finishes for Optimal Slip Resistance Performance

    Directory of Open Access Journals (Sweden)

    In-Ju Kim

    2018-03-01

    Full Text Available Background: Increasing the slip resistance of floor surfaces would be desirable, but there is a lack of evidence on whether traction properties are linearly correlated with the topographic features of the floor surfaces or what scales of surface roughness are required to effectively control the slipperiness of floors. Objective: This study expands on earlier findings on the effects of floor surface finishes against slip resistance performance and determines the operative ranges of floor surface roughness for optimal slip resistance controls under different risk levels of walking environments. Methods: Dynamic friction tests were conducted among three shoes and nine floor specimens under wet and oily environments and compared with a soapy environment. Results: The test results showed the significant effects of floor surface roughness on slip resistance performance against all the lubricated environments. Compared with the floor-type effect, the shoe-type effect on slip resistance performance was insignificant against the highly polluted environments. The study outcomes also indicated that the oily environment required rougher surface finishes than the wet and soapy ones in their lower boundary ranges of floor surface roughness. Conclusion: The results of this study with previous findings confirm that floor surface finishes require different levels of surface coarseness for different types of environmental conditions to effectively manage slippery walking environments. Collected data on operative ranges of floor surface roughness seem to be a valuable tool to develop practical design information and standards for floor surface finishes to efficiently prevent pedestrian fall incidents. Keywords: floor surface finishes, operational levels of floor surface roughness, slip resistance, wet, soapy and oily environments

  17. Use of wing morphometry for the discrimination of some Cerceris ...

    African Journals Online (AJOL)

    use

    2011-12-14

    Dec 14, 2011 ... Figure 12. Thin spline plate graphics for the species belonging to the genus Cerceris. Figure 13. Fore wing landmarks of the significant wing characteristics in the honeybee Apis mellifera. Linnaeus. stated as the traditional wing morphometry that enables the practical discrimination of the honeybee (Apis sp ...

  18. How swifts control their glide performance with morphing wings

    NARCIS (Netherlands)

    Lentink, D.; Muller, U. K.; Stamhuis, E. J.; de Kat, R.; van Gestel, W.; Veldhuis, L. L. M.; Henningsson, P.; Hedenstrom, A.; Videler, J. J.

    2007-01-01

    Gliding birds continually change the shape and size of their wings(1-6), presumably to exploit the profound effect of wing morphology on aerodynamic performance(7-9). That birds should adjust wing sweep to suit glide speed has been predicted qualitatively by analytical glide models(2,10), which

  19. Study of design parameters of flapping-wings

    NARCIS (Netherlands)

    Wang, Q.; Goosen, J.F.L.; Van Keulen, F.

    2014-01-01

    As one of the most important components of a flapping-wing micro air vehicle (FWMAV), the design of an energy-efficient flapping-wing has been a research interest recently. Research on insect flight from different perspectives has been carried out, mainly with regard to wing morphology, flapping

  20. Low Reynolds Number Wing Transients in Rotation and Translation

    Science.gov (United States)

    Jones, Anya; Schlueter, Kristy

    2012-11-01

    The unsteady aerodynamic forces and flow fields generated by a wing undergoing transient motions in both rotation and translation were investigated. An aspect ratio 2 flat plate wing at a 45 deg angle of attack was driven over 84 deg of rotation (3 chord-lengths of travel at 3/4 span) and 3 and 10 chord-lengths of translation in quiescent water at Reynolds numbers between 2,500 and 15,000. Flow visualization on the rotating wing revealed a leading edge vortex that lifted off of the wing surface, but remained in the vicinity of the wing for the duration of the wing stroke. A second spanwise vortex with strong axial flow was also observed. As the tip vortex grew, the leading edge vortex joined the tip vortex in a loop-like structure over the aft half of the wing. Near the leading edge, spanwise flow in the second vortex became entrained in the tip vortex near the corner of the wing. Unsteady force measurements revealed that lift coefficient increased through the constant-velocity portion of the wing stroke. Forces were compared for variations in wing acceleration and Reynolds number for both rotational and translational motions. The effect of tank blockage was investigated by repeating the experiments on multiple wings, varying the distance between the wing tip and tank wall. U.S. Air Force Research Laboratory, Summer Faculty Fellowship Program.

  1. VOC- and SVOC-emissions from adhesives, floor coverings and complete floor structures.

    Science.gov (United States)

    Wilke, Olaf; Jann, Oliver; Brödner, Doris

    2004-01-01

    Emissions of volatile organic compounds (VOC) and semivolatile organic compounds (SVOC) from materials for flooring installation (primer, screed, adhesive, floor covering) were measured by means of emission test chambers and cells over a time period of at least 28 days at 23 degrees C, 50% relative humidity and an area specific air flow rate of q = 1.25 m(3)/m(2) h. Single components were tested in comparison to three complete structures (same concrete, primer, screed, adhesive) with different types of floor covering (PVC, carpet, linoleum). Sorption into concrete/screed and different permeability of flooring materials affected the emissions from the complete structures. The complete structures with linoleum and PVC showed the same types of emission and emission rates as the individual floor coverings themselves. Emissions from the carpet-covered structure resulted also from the lower layers. In all cases emissions from the complete structures were lower than the sum of emissions from the single components. For two adhesives the formation of secondary emissions (aldehydes and organic acids) was observed starting after the standard testing time of 28 days. This paper gives a survey of possible emissions of VOCs and SVOCs from flooring materials and adhesives. On the example of these materials it is shown that the determination of SVOC-emissions from materials is important because after a few weeks the emission rates for SVOCs might be higher than for VOCs. In the real indoor environment SVOCs will be probably adsorbed to dust but by means of emission test chambers or cells the determination of emission rates from materials is possible. With the knowledge of this "emission potential" it is possible to estimate also the release of SVOCs into the (indoor) environment.

  2. Air Base Wing and Air Mobility Wing Consolidating on AMC-LED Joint Bases: A Delphi Study

    Science.gov (United States)

    2014-06-13

    AIR BASE WING AND AIR MOBILITY WING CONSOLIDATION ON AMC-LED JOINT BASES: A DELPHI STUDY GRADUATE RESEARCH PAPER Mason E. MacGarvey... DELPHI STUDY GRADUATE RESEARCH PAPER Presented to the Faculty Graduate School of Engineering Management Air Force Institute of Technology...iv AIR BASE WING AND AIR MOBILITY WING CONSOLIDATION ON AMC-LED JOINT BASES: A DELPHI STUDY Mason E. MacGarvey, BS, MBA

  3. Morphing Wing: Experimental Boundary Layer Transition Determination and Wing Vibrations Measurements and Analysis =

    Science.gov (United States)

    Tondji Chendjou, Yvan Wilfried

    This Master's thesis is written within the framework of the multidisciplinary international research project CRIAQ MDO-505. This global project consists of the design, manufacture and testing of a morphing wing box capable of changing the shape of the flexible upper skin of a wing using an actuator system installed inside the wing. This changing of the shape generates a delay in the occurrence of the laminar to turbulent transition area, which results in an improvement of the aerodynamic performances of the morphed wing. This thesis is focused on the technologies used to gather the pressure data during the wind tunnel tests, as well as on the post processing methodologies used to characterize the wing airflow. The vibration measurements of the wing and their real-time graphical representation are also presented. The vibration data acquisition system is detailed, and the vibration data analysis confirms the predictions of the flutter analysis performed on the wing prior to wind tunnel testing at the IAR-NRC. The pressure data was collected using 32 highly-sensitive piezoelectric sensors for sensing the pressure fluctuations up to 10 KHz. These sensors were installed along two wing chords, and were further connected to a National Instrument PXI real-time acquisition system. The acquired pressure data was high-pass filtered, analyzed and visualized using Fast Fourier Transform (FFT) and Standard Deviation (SD) approaches to quantify the pressure fluctuations in the wing airflow, as these allow the detection of the laminar to turbulent transition area. Around 30% of the cases tested in the IAR-NRC wind tunnel were optimized for drag reduction by the morphing wing procedure. The obtained pressure measurements results were compared with results obtained by infrared thermography visualization, and were used to validate the numerical simulations. Two analog accelerometers able to sense dynamic accelerations up to +/-16g were installed in both the wing and the aileron boxes

  4. Machine Learning for Flapping Wing Flight Control

    NARCIS (Netherlands)

    Goedhart, Menno; van Kampen, E.; Armanini, S.F.; de Visser, C.C.; Chu, Q.

    2018-01-01

    Flight control of Flapping Wing Micro Air Vehicles is challenging, because of their complex dynamics and variability due to manufacturing inconsistencies. Machine Learning algorithms can be used to tackle these challenges. A Policy Gradient algorithm is used to tune the gains of a

  5. Migration on Wings Aerodynamics and Energetics

    CERN Document Server

    Kantha, Lakshmi

    2012-01-01

    This book is an effort to explore the technical aspects associated with bird flight and migration on wings. After a short introduction on the birds migration, the book reviews the aerodynamics and Energetics of Flight and presents the calculation of the Migration Range. In addition, the authors explains aerodynamics of the formation flight and finally introduces great flight diagrams.

  6. Oblique-Flying-Wing Supersonic Transport Airplane

    Science.gov (United States)

    Van Der Velden, Alexander J. M.

    1992-01-01

    Oblique-flying-wing supersonic airplane proposed as possible alternative to B747B (or equivalent). Tranports passengers and cargo as fast as twice speed of sound at same cost as current subsonic transports. Flies at same holding speeds as present supersonic transports but requires only half takeoff distance.

  7. Chemical evaluation of winged beans ( Psophocarpus ...

    African Journals Online (AJOL)

    Chemical evaluation of winged beans ( Psophocarpus Tetragonolobus ), Pitanga cherries ( Eugenia uniflora) and orchid fruit ( Orchid fruit myristic a) ... The acid value ranged between 0.71 and 2.82 mg/KOH/g while iodine value ranged between 91.15 and 144.57. The refractive index ranged between 1.465 and 1.474 in all ...

  8. ``Schooling'' of wing pairs in flapping flight

    Science.gov (United States)

    Ramananarivo, Sophie; Zhang, Jun; Ristroph, Leif; AML, Courant Collaboration; Physics NYU Collaboration

    2015-11-01

    The experimental setup implements two independent flapping wings swimming in tandem. Both are driven with the same prescribed vertical heaving motion, but the horizontal motion is free, which means that the swimmers can take up any relative position and forward speed. Experiments show however clearly coordinated motions, where the pair of wings `crystallize' into specific stable arrangements. The follower wing locks into the path of the leader, adopting its speed, and with a separation distance that takes on one of several discrete values. By systematically varying the kinematics and wing size, we show that the set of stable spacings is dictated by the wavelength of the periodic wake structure. The forces maintaining the pair cohesion are characterized by applying an external force to the follower to perturb it away from the `stable wells'. These results show that hydrodynamics alone is sufficient to induce cohesive and coordinated collective locomotion through a fluid, and we discuss the hypothesis that fish schools and bird flocks also represent stable modes of motion.

  9. Aerodynamic comparison of a butterfly-like flapping wing-body model and a revolving-wing model

    Science.gov (United States)

    Suzuki, Kosuke; Yoshino, Masato

    2017-06-01

    The aerodynamic performance of flapping- and revolving-wing models is investigated by numerical simulations based on an immersed boundary-lattice Boltzmann method. As wing models, we use (i) a butterfly-like model with a body and flapping-rectangular wings and (ii) a revolving-wing model with the same wings as the flapping case. Firstly, we calculate aerodynamic performance factors such as the lift force, the power, and the power loading of the two models for Reynolds numbers in the range of 50-1000. For the flapping-wing model, the power loading is maximal for the maximum angle of attack of 90°, a flapping amplitude of roughly 45°, and a phase shift between the flapping angle and the angle of attack of roughly 90°. For the revolving-wing model, the power loading peaks for an angle of attack of roughly 45°. In addition, we examine the ground effect on the aerodynamic performance of the revolving-wing model. Secondly, we compare the aerodynamic performance of the flapping- and revolving-wing models at their respective maximal power loadings. It is found that the revolving-wing model is more efficient than the flapping-wing model both when the body of the latter is fixed and where it can move freely. Finally, we discuss the relative agilities of the flapping- and revolving-wing models.

  10. Paleozoic Nymphal Wing Pads Support Dual Model of Insect Wing Origins.

    Science.gov (United States)

    Prokop, Jakub; Pecharová, Martina; Nel, André; Hörnschemeyer, Thomas; Krzemińska, Ewa; Krzemiński, Wiesław; Engel, Michael S

    2017-01-23

    The appearance of wings in insects, early in their evolution [1], has been one of the more critical innovations contributing to their extraordinary diversity. Despite the conspicuousness and importance of wings, the origin of these structures has been difficult to resolve and represented one of the "abominable mysteries" in evolutionary biology [2]. More than a century of debate has boiled the matter down to two competing alternatives-one of wings representing an extension of the thoracic notum, the other stating that they are appendicular derivations from the lateral body wall. Recently, a dual model has been supported by genomic and developmental data [3-6], representing an amalgamation of elements from both the notal and pleural hypotheses. Here, we reveal crucial information from the wing pad joints of Carboniferous palaeodictyopteran insect nymphs using classical and high-tech techniques. These nymphs had three pairs of wing pads that were medially articulated to the thorax but also broadly contiguous with the notum anteriorly and posteriorly (details unobservable in modern insects), supporting their overall origin from the thoracic notum as well as the expected medial, pleural series of axillary sclerites. Our study provides support for the formation of the insect wing from the thoracic notum as well as the already known pleural elements of the arthropodan leg. These results support the unique, dual model for insect wing origins and the convergent reduction of notal fusion in more derived clades, presumably due to wing rotation during development, and they help to bring resolution to this long-standing debate. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Deflection of resilient materials for reduction of floor impact sound.

    Science.gov (United States)

    Lee, Jung-Yoon; Kim, Jong-Mun

    2014-01-01

    Recently, many residents living in apartment buildings in Korea have been bothered by noise coming from the houses above. In order to reduce noise pollution, communities are increasingly imposing bylaws, including the limitation of floor impact sound, minimum thickness of floors, and floor soundproofing solutions. This research effort focused specifically on the deflection of resilient materials in the floor sound insulation systems of apartment houses. The experimental program involved conducting twenty-seven material tests and ten sound insulation floating concrete floor specimens. Two main parameters were considered in the experimental investigation: the seven types of resilient materials and the location of the loading point. The structural behavior of sound insulation floor floating was predicted using the Winkler method. The experimental and analytical results indicated that the cracking strength of the floating concrete floor significantly increased with increasing the tangent modulus of resilient material. The deflection of the floating concrete floor loaded at the side of the specimen was much greater than that of the floating concrete floor loaded at the center of the specimen. The Winkler model considering the effect of modulus of resilient materials was able to accurately predict the cracking strength of the floating concrete floor.

  12. Mound No. 24 of the Alebastrovo I Burial Ground and the Problem of Succession Among the Early Nomadic Cultures of the Southern Urals in the 6th – 4th and 3rd – 1st Centuries BC

    Directory of Open Access Journals (Sweden)

    Denis V. Maryksin

    2017-03-01

    Full Text Available The article focuses on one of the burial mounds – Alebastrovo I, which is situated in the middle reaches of the Ural river. The analysis of the burial rite and grave goods reveals the combination of features peculiar of the culture of early nomads from the 6th to the 4th centuries BC and later features typical for the 3rd – 1st centuries BC. The collective nature of the burial in a large square pit (burial no. 2 relates to early features. Such burials are typical for the 5th and 4th centuries BC. But a dagger with a direct crosshair and a crescent-shaped pommel found in the burial belongs to the 3rd – 1st centuries BC. Findings of a mirror, a spoon and a whorl also deserve special attention. On formal grounds a mirror belongs to the type “Skripkin 1.6” – with a flat disk without roll and stick in the form of a triangular stem. They appeared in Sauromatian time, but were not widespread. Most of these mirrors refer to the turn of the eras – the first centuries AD. However, in our view the mirror from Alebastrovo I has the greatest similarity with the mirror disks of the so-called “musical” mirrors, which date back to the 2nd half of the 4th century BC. The bone spoon belongs to the type I, peculiar of the Sauromatian-time things of the 6th – 4th centuries BC. However, the pattern is similar to that on the handle of the bone products of later time – the 3rd – 2nd centuries BC. Clay whorl has a pattern in the form of 4 sectors, decorated with grooves and pits. Analogies are available on this ornament spindles from the 3rd – 2nd centuries BC of the Kara-Abyz culture in the Southern Urals. According to the set of attributes, this burial mound dated to the second half of the 3rd - 2nd centuries BC. The finds from this burial mound confirm the conclusion of the first explorer B. F. Zhelezchikov about continuity of the development of the early nomadic culture of this region in the 6th – 3rd centuries BC.

  13. Floor impact noise interception performance examination in the laboratory of the temperature warmth ceremony floor heating soundproof floor; Onsui yukadanbo boon jikahariyuka no jikkenshitsu ni okeru yuka shogekion shadan seino shiken

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A floor impact noise level improvement quantity examination in the laboratory was done about the warm water ceremony floor heating soundproof floor (for the warm water circulation-type floor warmth for benson floor SG floor warmth) that it was submitted by Hayakawa rubber incorporated company, and a floor impact noise level calculation and an insulation grade were found as that result. A form dimension, section details, and so on are shown in the table 1 in the figure 1 the kind of the test body, the trade name, the dimension, and so on. A test body was constructed on the floor edition for the examination. (NEDO)

  14. Physical activity and the pelvic floor.

    Science.gov (United States)

    Nygaard, Ingrid E; Shaw, Janet M

    2016-02-01

    Pelvic floor disorders are common, with 1 in 4 US women reporting moderate to severe symptoms of urinary incontinence, pelvic organ prolapse, or fecal incontinence. Given the high societal burden of these disorders, identifying potentially modifiable risk factors is crucial. Physical activity is one such potentially modifiable risk factor; the large number of girls and women participating in sport and strenuous training regimens increases the need to understand associated risks and benefits of these exposures. The aim of this review was to summarize studies reporting the association between physical activity and pelvic floor disorders. Most studies are cross-sectional and most include small numbers of participants. The primary findings of this review include that urinary incontinence during exercise is common and is more prevalent in women during high-impact sports. Mild to moderate physical activity, such as brisk walking, decreases both the odds of having and the risk of developing urinary incontinence. In older women, mild to moderate activity also decreases the odds of having fecal incontinence; however, young women participating in high-intensity activity are more likely to report anal incontinence than less active women. Scant data suggest that in middle-aged women, lifetime physical activity increases the odds of stress urinary incontinence slightly and does not increase the odds of pelvic organ prolapse. Women undergoing surgery for pelvic organ prolapse are more likely to report a history of heavy work than controls; however, women recruited from the community with pelvic organ prolapse on examination report similar lifetime levels of strenuous activity as women without this examination finding. Data are insufficient to determine whether strenuous activity while young predisposes to pelvic floor disorders later in life. The existing literature suggests that most physical activity does not harm the pelvic floor and does provide numerous health benefits for

  15. Modal analysis for floors in lightweight buildings

    DEFF Research Database (Denmark)

    Sjökvist, Lars-Göran; Brunskog, Jonas

    2007-01-01

    constructions usually consist of plates that are stiffened by beams and by the dividing walls. In this study the wave equation for a plate is expanded by Fourier series and an analytical solution in terms of the eigenmodes of the entire system is presented. The studied system consists of one lightweigt floor......High rise buildings built with wooden framing systems is of major interest for several reasons. It is said to be environmental friendly material, the production cost might be lower and the weight of the house is very low. The development of wooden housing is faster than the development...

  16. Multiple cues for winged morph production in an aphid metacommunity.

    Directory of Open Access Journals (Sweden)

    Mohsen Mehrparvar

    Full Text Available Environmental factors can lead individuals down different developmental pathways giving rise to distinct phenotypes (phenotypic plasticity. The production of winged or unwinged morphs in aphids is an example of two alternative developmental pathways. Dispersal is paramount in aphids that often have a metapopulation structure, where local subpopulations frequently go extinct, such as the specialized aphids on tansy (Tanacetum vulgare. We conducted various experiments to further understand the cues involved in the production of winged dispersal morphs by the two dominant species of the tansy aphid metacommunity, Metopeurum fuscoviride and Macrosiphoniella tanacetaria. We found that the ant-tended M. fuscoviride produced winged individuals predominantly at the beginning of the season while the untended M. tanacetaria produced winged individuals throughout the season. Winged mothers of both species produced winged offspring, although in both species winged offspring were mainly produced by unwinged females. Crowding and the presence of predators, effects already known to influence wing production in other aphid species, increased the percentage of winged offspring in M. tanacetaria, but not in M. fuscoviride. We find there are also other factors (i.e. temporal effects inducing the production of winged offspring for natural aphid populations. Our results show that the responses of each aphid species are due to multiple wing induction cues.

  17. The biomechanical origin of extreme wing allometry in hummingbirds.

    Science.gov (United States)

    Skandalis, Dimitri A; Segre, Paolo S; Bahlman, Joseph W; Groom, Derrick J E; Welch, Kenneth C; Witt, Christopher C; McGuire, Jimmy A; Dudley, Robert; Lentink, David; Altshuler, Douglas L

    2017-10-19

    Flying animals of different masses vary widely in body proportions, but the functional implications of this variation are often unclear. We address this ambiguity by developing an integrative allometric approach, which we apply here to hummingbirds to examine how the physical environment, wing morphology and stroke kinematics have contributed to the evolution of their highly specialised flight. Surprisingly, hummingbirds maintain constant wing velocity despite an order of magnitude variation in body weight; increased weight is supported solely through disproportionate increases in wing area. Conversely, wing velocity increases with body weight within species, compensating for lower relative wing area in larger individuals. By comparing inter- and intraspecific allometries, we find that the extreme wing area allometry of hummingbirds is likely an adaptation to maintain constant burst flight capacity and induced power requirements with increasing weight. Selection for relatively large wings simultaneously maximises aerial performance and minimises flight costs, which are essential elements of humming bird life history.

  18. Relations between pregnancy-related low back pain, pelvic floor activity and pelvic floor dysfunction

    NARCIS (Netherlands)

    Pool-Goudzwaard, A.L.; Slieker ten Hove, M.C.; Vierhout, M.E.; de Mulder, PH; Pool, J.J.M.; Snijders, C.J.; Stoeckart, R.

    2005-01-01

    To assess the occurrence of pelvic floor dysfunction (PFD) in pregnancy- related low back and pelvic pain (PLBP) patients, a cross-sectional study was performed, comprising 77 subjects. Each subject underwent physical assessment, and filled in the Urogenital Distress Inventory completed with

  19. 6th International Conference on Operator Theory

    CERN Document Server

    Douglas, R; Sz-Nagy, B; Voiculescu, D; Arsene, Gr

    1982-01-01

    The annual Operator Theory conferences in Timigoara are conceived as a means to promote cooperation and exchange of in­ formation between specialists in all areas of Operator Theory. The present volume consist of papers contributed by the partici­ pants of the 1981 Conference. Since many of these papers contain results on the invariant subspace problem or are related to the role of invariant subspaces in the study of operators or operator systems, we thought it appropiate to mention this in the title of the volume, though the "other topics" have a wide range. As in past years, special sessions concerning other fields of Functio­ nal Analysis were organized at the 1981 Conference, but contri­ butions to these sessions are not included in the present volume. The research contracts of the Department of Mathematics of INCREST with the National Council for Sciences and Technology of Romaliia provided the means for developping the research activity in Functional Analysis; these contracts constitute the generous...

  20. 6th CTF3 Collaboration Meeting

    CERN Document Server

    2000-01-01

    The sixth CTF3 collaboration meeting was held at CERN from the 1st to the 2nd November 2000. This meeting was devoted to the CTF3 combiner ring, delay loop and transfer lines, with the participation of members of the CLIC study group at CERN and of collaborators from INFN-Frascati. The CTF3 status has been summarized by the project leader, and several members of the INFN-Frascati group have presented an overview of the design activity of the different components. Working group sessions have been held on beam optics, on diagnostics and equipment and on RF deflectors. The main conclusions from the working groups have been reported at the end of the meeting. Issues that have been addressed include prototype design and construction (RF deflectors, path-length tuning wigglers, extraction kicker and vacuum chamber sections) and deadlines for component specifications. The impedance budget for the ring, delay loop and transfer lines, its impact on the choice of beam-position monitors and the problem of beam stability...

  1. 6th Workshop on Complex Networks

    CERN Document Server

    Simini, Filippo; Uzzo, Stephen; Wang, Dashun

    2015-01-01

    Elucidating the spatial and temporal dynamics of how things connect has become one of the most important areas of research in the 21st century. Network science now pervades nearly every science domain, resulting in new discoveries in a host of dynamic social and natural systems, including: how neurons connect and communicate in the brain, how information percolates within and among social networks, the evolution of science research through co-authorship networks, the spread of epidemics, and many other complex phenomena. Over the past decade, advances in computational power have put the tools of network analysis in the hands of increasing numbers of scientists, enabling more explorations of our world than ever before possible. Information science, social sciences, systems biology, ecosystems ecology, neuroscience and physics all benefit from this movement, which combines graph theory with data sciences to develop and validate theories about the world around us. This book brings together cutting-edge research ...

  2. APA Citation Style (6th edition)

    OpenAIRE

    2013-01-01

    ARP-AA-12-003 Acquisition Research Handbook Series This handbook is one of a series of four produced for the Acquisition Research Program (ARP) at the Naval Postgraduate School. The purpose of the ARP Handbook Series is to provide helpful information in a user-friendly format to assist graduate students and others in improving their research and writing skills.

  3. 6th Annual National Small Business Conference

    Science.gov (United States)

    2009-06-03

    developing training for PCRs in SBA SBIR Policy Directive Training for SB in role of SBA PCR in identifying– when acquisitions should be...Results • 1:30 2:15 pm John Moran Training in – , , Methods of IP Protection 2 15 3 00 Ali B R l f• : – : pm, son rown, o e o an SBA PCR in SBIR...Competition 6.302-1 Only one responsible source, or a limited number of responsible sources 6.302-2 Unusual and compelling urgency 6-302-3 Industrial

  4. 6th International Munich Chassis Symposium 2015

    CERN Document Server

    2015-01-01

    Connectivity has arrived in the vehicle - whether it is in-car internet or car-to-car communication. For the chassis too, the connected car is increasingly becoming a driver of innovation. Predictive and intelligent chassis systems and automated driving are just some of the topics being addressed. In addition to enhancing driving comfort and safety, interconnecting the powertrain with the chassis can also provide new functions, not only in cars but also in commercial vehicles. What is more, modularization, electrification of the powertrain, intelligent development methods and efforts to reduce fuel consumption are also driving innovations in chassis systems. Contents Consumer protection and methods.- New chassis systems.- Active chassis systems.- Energy efficiency, safety, and resources.- Driver assistance systems.- Development process.- Vehicle lateral dynamics.- Steering technology.- Test bench methods.- Environmental aspects and future technologies.- Control and simulation.- Road surface, tire, and wheel i...

  5. 6th International Congres on Ectodermal Dysplasia

    DEFF Research Database (Denmark)

    Gjørup, Hans; Nyhuus, Lone; Buhl, Jytte

    2015-01-01

    was to report treatment experiences in boys with HED treated by implant-supported dental prostheses before puberty, and to evaluate the growth of jaws during the pubertal period. Material and methods. Two boys with X-linked HED, 10 yrs of age, were included. One boy was edentulous; the other one had two molars...... (55 & 36). In addition to two mandibular implants, the treatment included bone-augmentation and insertion of maxillary implants at the age of 10 yrs. Implant-supported removable prostheses were fabricated. The study material consisted of profile cephalograms, panoramic radiographs, and clinical photos...... of prosthesis had been performed 3-4 times in the total observation period. Both the mandible and the maxilla were displaced downward and forward in the age-period 10-14 yrs. In the maxilla a considerable surface remodeling took place during the 4 yrs observation period. The angulations of the implants...

  6. 6th International Conference on ICT Innovations

    CERN Document Server

    Gjorgjevikj, Dejan

    2015-01-01

    Data is a common ground, a starting point for each ICT system. Data needs processing, use of different technologies and state-of-the-art methods in order to obtain new knowledge, to develop new useful applications that not only ease, but also increase the quality of life. These applications use the exploration of Big Data, High throughput data, Data Warehouse, Data Mining, Bioinformatics, Robotics, with data coming from social media, sensors, scientific applications, surveillance, video and image archives, internet texts and documents, internet search indexing, medical records, business transactions, web logs, etc. Information and communication technologies have become the asset in everyday life enabling increased level of communication, processing and information exchange. This book offers a collection of selected papers presented at the Sixth International Conference on ICT Innovations held in September 2014, in Ohrid, Macedonia, with main topic World of data. The conference gathered academics, professional...

  7. 6th International Conference on Network Analysis

    CERN Document Server

    Nikolaev, Alexey; Pardalos, Panos; Prokopyev, Oleg

    2017-01-01

    This valuable source for graduate students and researchers provides a comprehensive introduction to current theories and applications in optimization methods and network models. Contributions to this book are focused on new efficient algorithms and rigorous mathematical theories, which can be used to optimize and analyze mathematical graph structures with massive size and high density induced by natural or artificial complex networks. Applications to social networks, power transmission grids, telecommunication networks, stock market networks, and human brain networks are presented. Chapters in this book cover the following topics: Linear max min fairness Heuristic approaches for high-quality solutions Efficient approaches for complex multi-criteria optimization problems Comparison of heuristic algorithms New heuristic iterative local search Power in network structures Clustering nodes in random graphs Power transmission grid structure Network decomposition problems Homogeneity hypothesis testing Network analy...

  8. 6th International Conference on Mechanism Science

    CERN Document Server

    Flores, Paulo

    2017-01-01

    This book collects the most recent advances in mechanism science and machine theory with application to engineering. It contains selected peer-reviewed papers of the sixth International Conference on Mechanism Science, held in Nantes, France, 20-23 September 2016, covering topics on mechanism design and synthesis, mechanics of robots, mechanism analysis, parallel manipulators, tensegrity mechanisms, cable mechanisms, control issues in mechanical systems, history of mechanisms, mechanisms for biomechanics and surgery and industrial and nonindustrial applications.

  9. 6th International Workshop on Computational Kinematics

    CERN Document Server

    Gracia, Alba

    2014-01-01

    Computational kinematics is an enthralling area of science with a rich spectrum of problems at the junction of mechanics, robotics, computer science, mathematics, and computer graphics. The covered topics include design and optimization of cable-driven robots, analysis of parallel manipulators, motion planning, numerical methods for mechanism calibration and optimization, geometric approaches to mechanism analysis and design, synthesis of mechanisms, kinematical issues in biomechanics, construction of novel mechanical devices, as well as detection and treatment of singularities. The results should be of interest for practicing and research engineers as well as Ph.D. students from the fields of mechanical and electrical engineering, computer science, and computer graphics. Indexed in Conference Proceedings Citation Index- Science (CPCI-S).

  10. 6th International Symposium on Recurrence Plots

    CERN Document Server

    Jr, Jr; Ioana, Cornel; Marwan, Norbert

    2016-01-01

    The chapters in this book originate from the research work and contributions presented at the Sixth International Symposium on Recurrence Plots held in Grenoble, France in June 2015. Scientists from numerous disciplines gathered to exchange knowledge on recent applications and developments in recurrence plots and recurrence quantification analysis. This meeting was remarkable because of the obvious expansion of recurrence strategies (theory) and applications (practice) into ever-broadening fields of science. It discusses real-world systems from various fields, including mathematics, strange attractors, applied physics, physiology, medicine, environmental and earth sciences, as well as psychology and linguistics. Even readers not actively researching any of these particular systems will benefit from discovering how other scientists are finding practical non-linear solutions to specific problems. The book is of interest to an interdisciplinary audience of recurrence plot users and researchers interested in time...

  11. European Conference on Visual Perception (6th).

    Science.gov (United States)

    1983-11-30

    Institut fuer Verhaltenswissenschaft, ETH- Zentrum, 8092 Zuerich - Switzerland W. GERBINO: Istituto di Psicologia , Universitk di Padova, Piazza Capitaniato...fuer medizinische Psychologie, Schillerstrasse 42 - 8000 Muenchen 2, West Germany L. JANEZ ESCALADA: Psicologia Matem&tica, Facultad de Psicologla...Norway P. MANCINI: Istituto di Fisiologia clinica del C.N.R., Via Bonanno Pisano - 56100 Pisa, Italy C.A. MARZI: Istituto di Psicologia . Universit

  12. 6th IT First Tuesday@CERN

    CERN Multimedia

    François Grey

    2005-01-01

    Thursday 12 May, 17:30-19:30, Main Auditorium, CERN Data management in the 21st Century: the Petabyte challenge A Petabyte is a million Gigabytes, the equivalent of over 200,000 DVDs. That may seem like an enormous amount of data, but managing such quantities of data is a reality in the world of science, and is increasingly becoming an imperative in the world of business. This IT First Tuesday@CERN presents the Petabyte challenge, and some of the emerging solutions, from both scientific and commercial perspectives. For CERN's Large Hadron Collider, a Grid solution has been chosen to provide the necessary distributed storage capacity for the anticipated 15 Petabytes of data per year that this collider will produce. IBM is CERN's storage partner in the CERN openlab for DataGrid applications, and is testing the companies innovative TotalStorage SAN distributed filesystem in CERN's demanding IT environment. For Lausanne-based VisioWave, managing stored video data provides an extreme storage challenge. For D...

  13. 6th technical report on personnel training

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    This issue is the collection of the paper presented at the title meeting. Separate abstracts were presented for 3 of the papers in this report. The remaining 9 were considered outside the subject scope of INIS. (J.P.N.)

  14. 6th International Conference on General Inequalities

    CERN Document Server

    1992-01-01

    The sixthInternational Conference on General Inequalities was held from Dec. 9 to Dec. 15, 1990, at the Mathematisches Forschungsinstitut Oberwolfach (Black Fa­ rest, Germany). The organizing committee was composed of W.N. Everitt (Birm­ ingham), L. Losonczi (Debrecen) and W. Walter (Karlsruhe). Dr. A. Kovacec ( Coimbra) served cheerfully and efficiently as secretary of the meeting. The con­ ference was attended by 44 participants from 20 countries. Yet again the importance of inequalities in both pure and applied mathematics was made evident from the wide range of interests of the individual participants, and from the wealth of new results announced. New inequalities were presented in the usual spread of the subject areas now expected for these meetings: Classical and functional analysis, existence and boundary value problems for both ordinary and partial differential equations, with special contributions to computer science, quantum holography and error analysis. More strongly than ever, the role played ...

  15. Exposure assessment of kneeling work activities among floor layers

    DEFF Research Database (Denmark)

    Jensen, L K; Rytter, S; Bonde, Jens Peter

    2010-01-01

    The objective of this study was to quantify the proportion of kneeling work activities among floor layers and to assess external knee joint forces in five different kneeling work positions. Thirty-three floor layers were videotaped discontinuously and four floor layers were videotaped continuously...... for a whole working day. External knee forces were measured in five different kneeling work positions in ten floor layers using Computer Dynography. The study showed that floor layers spent a high percentage of time in knee-straining work positions. Kneeling work tasks, particularly gluing and crawling caused...... high external knee forces ranging from 0.3 Newton (SD 0.2) times body weight when floor layers were kneeling back on the heels, to 3.5 Newton (SD 0.3) times body weight in the crawling work position. The study highlights the need for prevention by minimizing the amount of kneeling work positions among...

  16. Biomechanic Factors Associated With Orbital Floor Fractures.

    Science.gov (United States)

    Patel, Sagar; Andrecovich, Christopher; Silverman, Michael; Zhang, Liying; Shkoukani, Mahdii

    2017-07-01

    Orbital floor fractures are commonly seen in clinical practice, yet the etiology underlying the mechanism of fracture is not well understood. Current research focuses on the buckling theory and hydraulic theory, which implicate trauma to the orbital rim and the globe, respectively. To elucidate and define the biomechanical factors involved in an orbital floor fracture. A total of 10 orbits from 5 heads (3 male and 2 female) were used for this study. These came from fresh, unfixed human postmortem cadavers that were each selected so that the cause of death did not interfere with the integrity of orbital walls. Using a drop tower with an accelerometer, we measured impact force on the globe and rim of cadaver heads affixed with strain gauges. The mean impacts for rim and globe trauma were 3.9 J (95% CI, 3.4-4.3 J) and 3.9 J (95% CI, 3.5-4.3 J), respectively. Despite similar impact forces to the globe and rim, strain-gauge data displayed greater mean strain for globe impact (6563 μS) compared with rim impact (3530 μS); however, these data were not statistically significant (95% CI, 3598-8953 μS; P = .94). Our results suggest that trauma directly to the globe predisposes a patient to a more posterior fracture while trauma to the rim demonstrates an anterior predilection. Both the hydraulic and buckling mechanisms of fracture exist and demonstrate similar fracture thresholds. NA.

  17. Pelvic floor electrophysiology in spinal cord injury.

    Science.gov (United States)

    Tankisi, H; Pugdahl, K; Rasmussen, M M; Clemmensen, D; Rawashdeh, Y F; Christensen, P; Krogh, K; Fuglsang-Frederiksen, A

    2016-05-01

    The study aimed to investigate sacral peripheral nerve function and continuity of pudendal nerve in patients with chronic spinal cord injury (SCI) using pelvic floor electrophysiological tests. Twelve patients with low cervical or thoracic SCI were prospectively included. Quantitative external anal sphincter (EAS) muscle electromyography (EMG), pudendal nerve terminal motor latency (PNTML) testing, bulbocavernosus reflex (BCR) testing and pudendal short-latency somatosensory-evoked potential (SEP) measurement were performed. In EAS muscle EMG, two patients had abnormal increased spontaneous activity and seven prolonged motor unit potential duration. PNTML was normal in 10 patients. BCR was present with normal latency in 11 patients and with prolonged latency in one. The second component of BCR could be recorded in four patients. SEPs showed absent cortical responses in 11 patients and normal latency in one. Pudendal nerve and sacral lower motor neuron involvement are significantly associated with chronic SCI, most prominently in EAS muscle EMG. The frequent finding of normal PNTML latencies supports earlier concerns on the utility of this test; however, BCR and pudendal SEPs may have clinical relevance. As intact peripheral nerves including pudendal nerve are essential for efficient supportive therapies, pelvic floor electrophysiological testing prior to these interventions is highly recommended. Copyright © 2016 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

  18. Lack of viable seeds in the forest floor after clearcutting

    Science.gov (United States)

    Robert M. Frank; Lawrence O. Safford

    1970-01-01

    The viability of seeds o[ northern conifers apparently does not persist in the forest floor for more than one year. A set of forest-floor samples collected two years alter a heavy seed crop and one year alter a seedcrop failure did not produce any conifer germinants, regardless of whether or not the surfaces of the samples were disturbed. A second set of forest-floor...

  19. Pelvic floor rehabilitation is effective in patients with multiple sclerosis.

    Science.gov (United States)

    Vahtera, T; Haaranen, M; Viramo-Koskela, A L; Ruutiainen, J

    1997-08-01

    To determine the effect of pelvic floor muscle exercises combined with electrical stimulation of pelvic floor on lower urinary tract dysfunction in multiple sclerosis (MS) patients with near normal (current symptoms of lower urinary tract dysfunction. The muscle activity of the pelvic floor muscles was tested using surface EMG. Subjective urinary symptoms were assessed using a questionnaire. Pelvic floor muscles were stimulated using electrical stimulation at six sessions. During and after the final session the patients were taught to exercise their pelvic floor muscles and advised to continue these exercises regularly for at least six months. The control group was not treated. The maximal contraction power and endurance of the pelvic floor muscles increased after six sessions of electrical stimulation with interferential currents. Symptoms of urinary urgency, frequency and incontinence were significantly less frequent in the treated group than in the untreated subjects. Male patients appeared to respond better to the treatment than female patients. Compliance with the pelvic floor exercises was over 60% at the end of a follow-up for six months. Most drop-outs were due to the disappearance of urinary tract symptoms or to severe relapses in MS. The present study indicates that pelvic floor muscle exercises combined with electrical stimulation of the pelvic floor constitute an effective treatment for lower urinary tract dysfunction at least in male patients with MS.

  20. Pelvic Organ Prolapse: New Concepts in Pelvic Floor Anatomy.

    Science.gov (United States)

    Maldonado, Pedro A; Wai, Clifford Y

    2016-03-01

    As the field of reconstructive pelvic surgery continues to evolve, with descriptions of new procedures to repair pelvic organ prolapse, it remains imperative to maintain a functional understanding of pelvic floor anatomy and support. The goal of this review was to provide a focused, conceptual approach to differentiating anatomic defects contributing to prolapse in the various compartments of the vagina. Rather than provide exhaustive descriptions of pelvic floor anatomy, basic pelvic floor anatomy is reviewed, new and historical concepts of pelvic floor support are discussed, and relevance to the surgical management of specific anatomic defects is addressed. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Gait of dairy cows on floors with different slipperiness.

    Science.gov (United States)

    Telezhenko, E; Magnusson, M; Bergsten, C

    2017-08-01

    This study assessed the slip resistance of different types of solid flooring in cattle housing using a range of technical tests and gait analysis. Dynamic and static coefficient of friction, skid resistance, and abrasiveness were tested on concrete flooring with a smooth finish, a grooved pattern, or a tamped pattern, acid-resistant mastic asphalt, soft rubber mats, and a worn slatted concrete floor. Coefficients of friction and skid resistance were tested under clean and slurry-soiled conditions. Linear kinematic variables were assessed in 40 cows with trackway measurements after the cows passed over the floors in a straight walk. All gait variables were assessed as deviations from those obtained on the slatted concrete floor, which was used as a baseline. The coefficient of friction tests divided the floors into 3 categories: concrete flooring, which had a low coefficient of friction (0.29-0.41); mastic asphalt flooring, which had medium values (0.38-0.45); and rubber mats, which had high values (0.49-0.57). The highest abrasion (g/10 m) was on the asphalt flooring (4.48), and the concrete flooring with a tamped pattern had significantly higher abrasiveness (2.77) than the other concrete floors (1.26-1.60). Lowest values on the skid-resistance tests (dry/wet) were for smooth concrete (79/35) and mastic asphalt (65/47), especially with a slurry layer on the surface. Gait analysis mainly differentiated floors with higher friction and abrasion by longer strides and better tracking. Step asymmetry was lower on floors with high skid-resistance values. The most secure cow gait, in almost every aspect, was observed on soft rubber mats. Relationships between gait variables and physical floor characteristics ranged from average to weak (partial correlations 0.54-0.16). Thus, none of the physical characteristics alone was informative enough to characterize slip resistance. With reference to gait analysis, the abrasiveness of the hard surfaces was more informative than the

  2. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor

    CERN Document Server

    British Standards Institution. London

    1998-01-01

    Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor

  3. PHYSICAL ACTIVITY AND THE PELVIC FLOOR

    Science.gov (United States)

    Nygaard, Ingrid E.; Shaw, Janet M.

    2015-01-01

    Pelvic floor disorders (PFDs) are common, with one in four U.S. women reporting moderate to severe symptoms of urinary incontinence, pelvic organ prolapse or fecal incontinence. Given the high societal burden of these disorders, identifying potentially modifiable risk factors is crucial. Physical activity is one such potentially modifiable risk factor; the large number of girls and women participating in sport and strenuous training regimens increases the need to understand associated risks and benefits of these exposures. The aim of this review is to summarize studies reporting the association between physical activity and PFDs. Most studies are cross-sectional and most include small numbers of participants. The primary findings of this review include: Urinary incontinence during exercise is common and is more prevalent in women during high-impact sports. Mild to moderate physical activity, such as brisk walking, decreases both the odds of having and the risk of developing urinary incontinence. In older women, mild to moderate activity also decreases the odds of having fecal incontinence; however, young women participating in high intensity activity are more likely to report anal incontinence than less active women. Scant data suggest that in middle-aged women, lifetime physical activity increases the odds of stress urinary incontinence slightly and does not increase the odds of pelvic organ prolapse. Women undergoing surgery for pelvic organ prolapse are more likely to report a history of heavy work than controls; however, women recruited from the community with pelvic organ prolapse on examination report similar lifetime levels of strenuous activity as women without this exam finding. Data are insufficient to determine whether strenuous activity while young predisposes to pelvic floor disorders later in life. The existing literature suggests that most physical activity does not harm the pelvic floor and does provide numerous health benefits for women. However

  4. The optimal design of UAV wing structure

    Science.gov (United States)

    Długosz, Adam; Klimek, Wiktor

    2018-01-01

    The paper presents an optimal design of UAV wing, made of composite materials. The aim of the optimization is to improve strength and stiffness together with reduction of the weight of the structure. Three different types of functionals, which depend on stress, stiffness and the total mass are defined. The paper presents an application of the in-house implementation of the evolutionary multi-objective algorithm in optimization of the UAV wing structure. Values of the functionals are calculated on the basis of results obtained from numerical simulations. Numerical FEM model, consisting of different composite materials is created. Adequacy of the numerical model is verified by results obtained from the experiment, performed on a tensile testing machine. Examples of multi-objective optimization by means of Pareto-optimal set of solutions are presented.

  5. Adjoint-based optimization for flapping wings

    Science.gov (United States)

    Xu, Min; Wei, Mingjun

    2012-11-01

    Adjoint-based methods show great potential in flow control and optimization of complex problems with high- or infinite-dimensional control space. It is attractive to solve an adjoint problem to understand the complex effects from multiple control parameters to a few performance indicators of the flight of birds or insects. However, the traditional approach to formulate the adjoint problem becomes either impossible or too complex when arbitrary moving boundary (e.g. flapping wings) and its perturbation is considered. Here, we use non-cylindrical calculus to define the perturbation. So that, a simple adjoint system can be derived directly in the inertial coordinate. The approach is first applied to the optimization of cylinder oscillation and later to flapping wings. Supported by AFOSR.

  6. Quantifying the dynamic wing morphing of hovering hummingbird.

    Science.gov (United States)

    Maeda, Masateru; Nakata, Toshiyuki; Kitamura, Ikuo; Tanaka, Hiroto; Liu, Hao

    2017-09-01

    Animal wings are lightweight and flexible; hence, during flapping flight their shapes change. It has been known that such dynamic wing morphing reduces aerodynamic cost in insects, but the consequences in vertebrate flyers, particularly birds, are not well understood. We have developed a method to reconstruct a three-dimensional wing model of a bird from the wing outline and the feather shafts (rachides). The morphological and kinematic parameters can be obtained using the wing model, and the numerical or mechanical simulations may also be carried out. To test the effectiveness of the method, we recorded the hovering flight of a hummingbird ( Amazilia amazilia ) using high-speed cameras and reconstructed the right wing. The wing shape varied substantially within a stroke cycle. Specifically, the maximum and minimum wing areas differed by 18%, presumably due to feather sliding; the wing was bent near the wrist joint, towards the upward direction and opposite to the stroke direction; positive upward camber and the 'washout' twist (monotonic decrease in the angle of incidence from the proximal to distal wing) were observed during both half-strokes; the spanwise distribution of the twist was uniform during downstroke, but an abrupt increase near the wrist joint was found during upstroke.

  7. Optimization of aerodynamic efficiency for twist morphing MAV wing

    Directory of Open Access Journals (Sweden)

    N.I. Ismail

    2014-06-01

    Full Text Available Twist morphing (TM is a practical control technique in micro air vehicle (MAV flight. However, TM wing has a lower aerodynamic efficiency (CL/CD compared to membrane and rigid wing. This is due to massive drag penalty created on TM wing, which had overwhelmed the successive increase in its lift generation. Therefore, further CL/CDmax optimization on TM wing is needed to obtain the optimal condition for the morphing wing configuration. In this paper, two-way fluid–structure interaction (FSI simulation and wind tunnel testing method are used to solve and study the basic wing aerodynamic performance over (non-optimal TM, membrane and rigid wings. Then, a multifidelity data metamodel based design optimization (MBDO process is adopted based on the Ansys-DesignXplorer frameworks. In the adaptive MBDO process, Kriging metamodel is used to construct the final multifidelity CL/CD responses by utilizing 23 multi-fidelity sample points from the FSI simulation and experimental data. The optimization results show that the optimal TM wing configuration is able to produce better CL/CDmax magnitude by at least 2% than the non-optimal TM wings. The flow structure formation reveals that low TV strength on the optimal TM wing induces low CD generation which in turn improves its overall CL/CDmax performance.

  8. Logistics Supply of the Distributed Air Wing

    Science.gov (United States)

    2014-09-01

    Event Graph The Consumption Process first instantiates the variables . The model follows a conveyor belt pattern, whereby after processing an event...to any part of the world. A capstone project, conducted by the system engineering curriculum, proposed to distribute the air assets from the aircraft...SUBJECT TERMS distributed air wing, logistics, supply, unmanned air systems , cargo UAS, unmanned systems , discrete event simulation, vehicle routing

  9. CFD Analysis of UAV Flying Wing

    Directory of Open Access Journals (Sweden)

    Vasile PRISACARIU

    2016-09-01

    Full Text Available Numerical methods for solving equations describing the evolution of 3D fluid experienced a significant development closely related to the progress of information systems. Today, especially in the field of fluid mechanics, numerical simulations allow the study of gas-thermodynamic confirmed by experimental techniques in wind tunnel conditions and actual flight tests for modeling complex aircraft. The article shows a case of numerical analysis of the lifting surface on the UAV type flying wing.

  10. Topology Optimization of an Aircraft Wing

    Science.gov (United States)

    2015-06-11

    can combine the advantages of a variable stiffness design with- out the use of actuators. Curved beams, which couple torsion and bending , counteract... torsional deflection, control natural frequency, exploit coupling of bending and tor- sion to control flutter, reduce thickness to chord ratios due to...disregarded any bending or torsional effects caused by displacement of the wing, and was thus not considered. Therefore, the initial design analysis

  11. Improving the cleaning procedure to make kitchen floors less slippery.

    Science.gov (United States)

    Quirion, F; Poirier, P; Lehane, P

    2008-12-01

    This investigation shows that, in most cases, the floor cleaning procedure of typical restaurants could be improved, resulting in a better cleaning efficiency and a better floor friction. This simple approach could help reduce slips and falls in the workplace. Food safety officers visited ten European style restaurants in the London Borough of Bromley (UK) to identify their floor cleaning procedure in terms of the cleaning method, the concentration and type of floor cleaner and the temperature of the wash water. For all 10 restaurants visited, the cleaning method was damp mopping. Degreasers were used in three sites while neutral floor cleaners were used in seven sites. Typically, the degreasers were over diluted and the neutrals were overdosed. The wash water temperature ranged from 10 to 72 degrees C. The on-site cleaning procedures were repeated in the laboratory for the removal of olive oil from new and sealed quarry tiles, fouled and worn quarry tiles and new porcelain tiles. It is found that in 24 out of 30 cases, cleaning efficiency can be improved by simple changes in the floor cleaning procedure and that these changes result in a significant improvement of the floor friction. The nature of the improved floor cleaning procedure depends on the flooring type. New and properly sealed flooring tiles can be cleaned using damp mopping with a degreaser diluted as recommended by the manufacturer in warm or hot water (24 to 50 degrees C). But as the tiles become worn and fouled, a more aggressive floor cleaning is required such as two-step mopping with a degreaser diluted as recommended by the manufacturer in warm water (24 degrees C).

  12. Floor tile and mastic removal project report

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-01

    A test program was developed and coordinated with State and Federal Regulators and carried out at Fort Sill, Oklahoma. This program was carefully designed to create the worst conditions in order to evaluate whether asbestos fibers are released when asbestos containing floor tile and mastic are removed. There were over 1,000 samples taken and analyzed during the execution of the program. The conclusions reached were based upon analysis of the critical samples using the Transmission Electron Microscope (TEM) technology. Additionally, the TEM procedures were used to evaluate personnel samples to determine whether those fibers found were asbestos or other materials. Most of the (TEM) samples were analyzed by the US Environmental Protection Agency (EPA) Risk Reduction Engineering Laboratory in Cincinnati, Ohio.

  13. Seismic resistance of composite floor diaphragms

    Science.gov (United States)

    Porter, M. L.; Greimann, L. F.

    1980-05-01

    The behavioral and strength characteristics of composite steel deck floor slab diaphragms are reported. Principal characteristics investigated include maximum load, ductility, stiffness, and failure mode. The addition of studs increases the flexural load capacity of one-way steel deck reinforced slabs by 10 to 30 percent. Non-studded specimens ultimately fail because of loss of interfacial force in the shear span. Studded specimens ultimately fail due to tearing of the deck near the stud. Two analysis procedures were used, a contributing forces approach and a shear-bond approach. The former was found to be a potential analysis procedure, and results from the shear-bond increase approach demonstrated its feasibility for studded specimens.

  14. Architectural Considerations for Holonic Shop Floor Control

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1997-01-01

    The general trends in the global markets is forcing manufacturing firms to produce products with increasing diversity while adapting new technology as it emerges. In order to cope with this new situation they need manu-facturing systems which are much more agile than them we presently consider...... of the HMS concept, followed by an investigation regard-ing the development of shop floor control architectures. This will include a summary of the ongoing research on HMS, and current results regarding the development of a holonic SFC architecture in a cellular manufacturing perspective. The paper...... will present a model of both a holonic cell and multi-cell control architecture. The work is based on a theoretical study of new manufac-turing systems theories, practical test, development of a prototype, and two case studies. It is part of a research project which aims at developing a multi-cell control...

  15. Tracing the evolution of avian wing digits.

    Science.gov (United States)

    Xu, Xing; Mackem, Susan

    2013-06-17

    It is widely accepted that birds are a subgroup of dinosaurs, but there is an apparent conflict: modern birds have been thought to possess only the middle three fingers (digits II-III-IV) of an idealized five-digit tetrapod hand based on embryological data, but their Mesozoic tetanuran dinosaur ancestors are considered to have the first three digits (I-II-III) based on fossil evidence. How could such an evolutionary quirk arise? Various hypotheses have been proposed to resolve this paradox. Adding to the confusion, some recent developmental studies support a I-II-III designation for avian wing digits whereas some recent paleontological data are consistent with a II-III-IV identification of the Mesozoic tetanuran digits. A comprehensive analysis of both paleontological and developmental data suggests that the evolution of the avian wing digits may have been driven by homeotic transformations of digit identity, which are more likely to have occurred in a partial and piecemeal manner. Additionally, recent genetic studies in mouse models showing plausible mechanisms for central digit loss invite consideration of new alternative possibilities (I-II-IV or I-III-IV) for the homologies of avian wing digits. While much progress has been made, some advances point to the complexity of the problem and a final resolution to this ongoing debate demands additional work from both paleontological and developmental perspectives, which will surely yield new insights on mechanisms of evolutionary adaptation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Unsteady fluid dynamics around a hovering wing

    Science.gov (United States)

    Krishna, Swathi; Green, Melissa; Mulleners, Karen

    2017-11-01

    The unsteady flow around a hovering flat plate wing has been investigated experimentally using particle image velocimetry and direct force measurements. The measurements are conducted on a wing that rotates symmetrically about the stroke reversal at a reduced frequency of k = 0.32 and Reynolds number of Re = 220 . The Lagrangian finite-time Lyapunov exponent method is used to analyse the unsteady flow fields by identifying dynamically relevant flow features such as the primary leading edge vortex (LEV), secondary vortices, and topological saddles, and their evolution within a flapping cycle. The flow evolution is divided into four stages that are characterised by the LEV (a)emergence, (b)growth, (c)lift-off, and (d)breakdown and decay. Tracking saddle points is shown to be helpful in defining the LEV lift-off which occurs at the maximum stroke velocity. The flow fields are correlated with the aerodynamic forces revealing that the maximum lift and drag are observed just before LEV lift-off. The end of wing rotation in the beginning of the stroke stimulates a change in the direction of the LEV growth and the start of rotation at the end of the stroke triggers the breakdown of the LEV.

  17. PRIMARY SCHOOL 6th CLASS STUDENTS’ SKILL OF USING THE TYPES OF WORDS İLKÖĞRETİM ALTINCI SINIF ÖĞRENCİLERİNİN KELİME TÜRLERİNİ KULLANMA BECERİLERİ

    Directory of Open Access Journals (Sweden)

    Fatma AÇIK

    2010-10-01

    Full Text Available This study has been made in order to detect the primary school 6th class students’skill of using the types of words. The study has a descriptive quality. Primary school 6th class students in Ankara make up the study environment. The participants consist of 211 6th class students from three socioeconomically different (low, middle and high level in Ankara city center. Students were asked to write two informative and narrative texts in order to detect the skill of using the types of words. In order to determine the factors that effect the acquisition of using the types of words. A questionnaire is applied which contains the topics of sex, kindergarten education, parents’educational level. As a result, we found out that female students, the students with kindergarten education, have used more words type than men and students with no kindergarten education, respectively. We also observed that the education level of parents also affected the writing skill of students. In addition to that, effect on writing skill of the school environment and the socioeconomic level of school were found significant. Bu çalışma evrenini Ankara’da öğrenim gören ilköğretim 6. sınıf öğrencileri oluşturduğu sosyoekonomik düzeyleri düşük, orta ve yüksek olan üç ilköğretim okulunda gerçekleştirilmiştir. İlköğretim 6. sınıfta okuyan 211 öğrenciye bilgilendirici ve öyküleyici türde iki farklı metin yazdırılmıştır. Çalışma sonucunda kız öğrencilerin yazdıkları metinlerde erkek öğrencilere göre daha fazla kelime türünü kullandığı tespit edilmiştir. Okul öncesi eğitim alan öğrencilere ait metinlerde, okul öncesi eğitim almayan öğrencilere göre kelime türlerine daha fazla yer verdikleri ayrıca anne ve babalarının eğitim seviyesinin öğrencilerin kelime türlerini kullanma becerilerinde fark yarattığı ve okulun bulunduğu çevrenin sosyoekonomik düzeyinin öğrencilerin kelime türlerini kullanma

  18. 76 FR 26685 - Multilayered Wood Flooring From the People's Republic of China: Alignment of Final Countervailing...

    Science.gov (United States)

    2011-05-09

    ... International Trade Administration Multilayered Wood Flooring From the People's Republic of China: Alignment of... multilayered wood flooring (``wood flooring'') from the People's Republic of China (``PRC'') with the final... wood flooring from the PRC. See Multilayered Wood Flooring from the People's Republic of China...

  19. An approach to constipation associated with pelvic floor dysfunction ...

    African Journals Online (AJOL)

    An approach to constipation associated with pelvic floor dysfunction. ... A detailed history and physical examination is necessary. Tests of colonic and pelvic floor function help distinguish constipation ... A small group of patients, refractory to medical therapy should be considered for surgery. Should test results show pelvic ...

  20. reliability analysis of a two span floor designed according

    African Journals Online (AJOL)

    user

    contemporary striking design alongside modern architecture in our towns and cities. Afolayan and. Adeyeye [7] noted the inherent advantages of timber that make it especially attractive in specific applications. Timber floor is used in buildings, local ports decks and footbridges to provide platforms for walking [2]. A timber floor ...

  1. Obstetric practice and the pelvic floor | Jeffery | Obstetrics and ...

    African Journals Online (AJOL)

    A vaginal delivery has a profound impact on the pelvic floor with the potential for significant functional sequelae. There is an increasing trend among obstetricians to perform a caesarean section to preserve pelvic floor function. This in turn has contributed to an increasing caesarean section rate, both in South Africa and ...

  2. Longevity of black cherry seed in the forest floor

    Science.gov (United States)

    G. W. Wendel

    1972-01-01

    Observations made on the Fernow Experimental Forest in West Virginia indicate that some black cherry seeds remain viable in the forest floor over three winters. On the average fewer than 10 percent of the seeds stored in the forest floor germinated the first spring, about 50 percent germinated the second spring, and 25 percent germinated the third spring.

  3. Experimental Verification of an Instrument to Test Flooring Materials

    Science.gov (United States)

    Philip, Rony; Löfgren, Hans, Dr

    2018-02-01

    The focus of this work is to validate the fluid model with different flooring materials and the measurements of an instrument to test flooring materials and its force attenuating capabilities using mathematical models to describe the signature and coefficients of the floor. The main contribution of the present work focus on the development of a mathematical fluid model for floors. The aim of the thesis was to analyze, compare different floor materials and to study the linear dynamics of falling impacts on floors. The impact of the hammer during a fall is captured by an accelerometer and response is collected using a picoscope. The collected data was analyzed using matlab least square method which is coded as per the fluid model. The finding from this thesis showed that the fluid model works with more elastic model but it doesn’t work for rigid materials like wood. The importance of parameters like velocity, mass, energy loss and other coefficients of floor which influences the model during the impact of falling on floors were identified and a standardized testing method was set.

  4. Efficient systems of sound insulating floors. [multilayer soundproofing materials

    Science.gov (United States)

    Giurgiu, I. I.

    1974-01-01

    Experiments are summerized on dwelling houses with a view to the creation of efficient warm floors. The experiments concern the types of floors built in Rumania with currently produced materials. At the present time experiments are continuing with solutions based on concrete slabs equipped with a PVC carpet and placed on an elastic layer.

  5. Sound absorption characteristics of tree bark and forest floor

    Science.gov (United States)

    G. Reethof; O. H. McDaniel; G. M. Heisler

    1977-01-01

    Results of basic research on absorption of sound by tree bark and forest floors are presented. Amount of sound absorption by tree bark was determined by laboratory experiments with bark samples in a standing-wave tube. A modified portable standing-wave tube was used to measure absorption of sound by forest floors with different moisture contents, with and without leaf...

  6. Floor Care. Resource Manual for Custodial Training Course #2.

    Science.gov (United States)

    Florida State Dept. of Education, Tallahassee. School Plant Management Section.

    The most widely accepted practices and recent developments in the floor maintenance field are presented as an aid to school custodians and administrators. It is important that operations and maintenance men develop inexpensive, efficient methods of treatment which will give the floor maximum protection and service, make it look its best, and…

  7. 17 CFR 155.2 - Trading standards for floor brokers.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Trading standards for floor brokers. 155.2 Section 155.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION TRADING STANDARDS § 155.2 Trading standards for floor brokers. Each contract market shall adopt and submit...

  8. Claw health and floor type in group housed sows

    NARCIS (Netherlands)

    Vermeer, H.M.; Vermeij, I.

    2014-01-01

    The objective of this review is to give an overview of the effect of floor types on claw health in group housed sows. The risk on lameness caused by the pen floor is increasing with group housing becoming more important. Lameness is a major welfare and production problem and often related to claw

  9. 75 FR 79019 - Multilayered Wood Flooring From China

    Science.gov (United States)

    2010-12-17

    ... COMMISSION Multilayered Wood Flooring From China Determinations On the basis of the record \\1\\ developed in... reason of imports from China of multilayered wood flooring, provided for in subheadings 4409.10, 4409.29... than fair value (LTFV) and subsidized by the Government of China. \\1\\ The record is defined in Sec. 207...

  10. 78 FR 30329 - Multilayered Wood Flooring from China

    Science.gov (United States)

    2013-05-22

    ... COMMISSION Multilayered Wood Flooring from China AGENCY: United States International Trade Commission. ACTION... and 731-TA-1179 (Final) concerning multilayered wood flooring (``MLWF'') from China. For further... States was materially injured by reason of imports of MLWF from China that were sold in the United States...

  11. 76 FR 76435 - Multilayered Wood Flooring From China

    Science.gov (United States)

    2011-12-07

    ... COMMISSION Multilayered Wood Flooring From China Determinations On the basis of the record \\1\\ developed in... China of multilayered wood flooring, provided for in subheadings 4409.10, 4409.29, 4412.31, 4412.32... orders on imports of this product from China. Background The Commission instituted these investigations...

  12. A Novel Cystometric Model of Pelvic Floor Dysfunction After Rabbit Pelvic Floor Noxious Electrical Stimulation.

    Science.gov (United States)

    Dobberfuhl, Amy D; Spettel, Sara; Schuler, Catherine; Dubin, Andrew H; Levin, Robert M; De, Elise J B

    2016-01-01

    Although a relationship between pelvic floor dysfunction and lower urinary tract symptoms is described in the literature, the mechanism and pathways need further characterization. We developed an animal model of pelvic floor dysfunction after noxious stimulation of the pubococcygeus (PC) muscle. Fifteen female adult rabbits were evaluated with cystometry (CMG) and electromyography (EMG) recordings from the PC muscle. Cystometry/EMG was performed before and after treatment animal (n = 11) received noxious pelvic floor electrical stimulation through the PC EMG electrode, and controls (n = 4) underwent sham needle placement. Two animals underwent S3 dorsal rhizotomy to demonstrate that the observed results required afferent innervation. Voiding changes were demonstrated in 9 of 11 rabbits after stimulation. Most of the rabbits (7/9) exhibited a prolonged-dysfunctional voiding pattern with larger capacity (mean, 17 mL [SEM, ±8 mL]), longer intercontractile interval (227% [SEM, ±76%]) and duration (163% [SEM, ±20%]), and increased postvoid residual (24 mL [SEM, ±6 mL]). The remaining dysfunctional rabbits (2/9) exhibited an overactive-dysfunctional voiding pattern with lower capacity (-26 mL [SEM, ±6 mL]), shortened intercontractile interval (16% [SEM, ±9%]) and duration (56% [SEM, ±30%]), and decreased postvoid residual (-27 mL [SEM, ±6 mL]). Nonresponder rabbits (2/11) were relatively unchanged in their micturition cycles after stimulation. Rhizotomy animals were acontractile and filled until overflow incontinence occurred. Using noxious electrical stimulation of the pelvic musculature, we were able to produce an animal model of pelvic floor dysfunction in most rabbits as hallmarked by a larger bladder capacity, an increased intercontractile interval, and prolonged contraction duration.

  13. Pelvic floor dysfunction, and effects of pregnancy and mode of delivery on pelvic floor

    Directory of Open Access Journals (Sweden)

    Murat Bozkurt

    2014-12-01

    Full Text Available Pelvic floor dysfunction (PFD, although seems to be simple, is a complex process that develops secondary to multifactorial factors. The incidence of PFD is increasing with increasing life expectancy. PFD is a term that refers to a broad range of clinical scenarios, including lower urinary tract excretory and defecation disorders, such as urinary and anal incontinence, overactive bladder, and pelvic organ prolapse, as well as sexual disorders. It is a financial burden on the health care system and disrupts women's quality of life. Strategies applied to decrease PFD are focused on the course of pregnancy, mode and management of delivery, and pelvic exercise methods. Many studies in the literature define traumatic birth, usage of forceps, length of the second stage of delivery, and sphincter damage as modifiable risk factors for PFD. Maternal age, fetal position, and fetal head circumference are nonmodifiable risk factors. Although numerous studies show that vaginal delivery affects pelvic floor structures and their functions in a negative way, there is not enough scientific evidence to recommend elective cesarean delivery in order to prevent development of PFD. PFD is a heterogeneous pathological condition, and the effects of pregnancy, vaginal delivery, cesarean delivery, and possible risk factors of PFD may be different from each other. Observational studies have identified certain obstetrical exposures as risk factors for pelvic floor disorders. These factors often coexist; therefore, the isolated effects of these variables on the pelvic floor are difficult to study. The routine use of episiotomy for many years in order to prevent PFD is not recommended anymore; episiotomy should be used in selected cases, and the mediolateral procedures should be used if needed.

  14. Wing geometry of Triatoma sordida (Hemiptera: Reduviidae) populations from Brazil.

    Science.gov (United States)

    Vendrami, Daniel Pagotto; Obara, Marcos Takashi; Gurgel-Gonçalves, Rodrigo; Ceretti-Junior, Walter; Marrelli, Mauro Toledo

    2017-04-01

    Triatoma sordida has a widespread distribution in Argentina, Bolivia, Brazil, Paraguay, and Uruguay and is frequently found in peridomestic environments. We investigated size and shape variability of T. sordida wings across Brazil. Field-collected adults from twelve populations were studied. For each individual female, seven landmarks on the right wing were digitalized. Shape variables derived from Procrustes superimposition were used in Principal Component Analysis (PCA). Wing size and shape variations among populations was explored by means of ANOVA. Wing centroid size was significantly different among T. sordida populations; specimens from Bahia (East) were larger than those of Mato Grosso do Sul (West). PCA based on wing shape variables showed low wing shape variability. These results reinforce previous data showing low genetic variability among T. sordida populations from Brazil. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Measurement of shape and deformation of insect wing

    Science.gov (United States)

    Yin, Duo; Wei, Zhen; Wang, Zeyu; Zhou, Changqiu

    2018-01-01

    To measure the shape and deformation of an insect wing, a scanning setup adopting laser triangulation and image matching was developed. Only one industry camera with two light sources was employed to scan the transparent insect wings. 3D shape and point to point full field deformation of the wings could be obtained even when the wingspan is less than 3 mm. The venation and corrugation could be significantly identified from the results. The deformation of the wing under pin loading could be seen clearly from the results as well. Calibration shows that the shape and deformation measurement accuracies are no lower than 0.01 mm. Laser triangulation and image matching were combined dexterously to adapt wings' complex shape, size, and transparency. It is suitable for insect flight research or flapping wing micro-air vehicle development.

  16. [Postpartum pelvic floor muscle training and abdominal rehabilitation: Guidelines].

    Science.gov (United States)

    Deffieux, X; Vieillefosse, S; Billecocq, S; Battut, A; Nizard, J; Coulm, B; Thubert, T

    2015-12-01

    Provide guidelines for clinical practice concerning postpartum rehabilitation. Systematically review of the literature concerning postpartum pelvic floor muscle training and abdominal rehabilitation. Pelvic-floor rehabilitation using pelvic floor muscle contraction exercises is recommended to treat persistent urinary incontinence at 3 months postpartum (grade A), regardless of the type of incontinence. At least 3 guided sessions with a therapist is recommended, associated with pelvic floor muscle exercises at home. This postpartum rehabilitation improves short-term urinary incontinence (1 year) but not long-term (6-12 years). Early pelvic-floor rehabilitation (within 2 months following childbirth) is not recommended (grade C). Postpartum pelvic-floor rehabilitation in women presenting with anal incontinence, is associated with a lower prevalence of anal incontinence symptoms in short-term (1 year) (EL3) but not long-term (6 and 12) (EL3). Postpartum pelvic-floor rehabilitation is recommended to treat anal incontinence (grade C) but results are not maintained in medium or long term. No randomized trials have evaluated the pelvic-floor rehabilitation in asymptomatic women in order to prevent urinary or anal incontinence in medium or long term. It is therefore not recommended (expert consensus). Rehabilitation supervised by a therapist (physiotherapist or midwife) is not associated with better results than simple advice for voluntary contraction of the pelvic floor muscles to prevent/correct, in short term (6 months), a persistent prolapse 6 weeks postpartum (EL2), whether or not with a levator ani avulsion (EL3). Postpartum pelvic-floor rehabilitation is not associated with a decrease in the prevalence of dyspareunia at 1-year follow-up (EL3). Postpartum pelvic-floor rehabilitation guided by a therapist is therefore not recommended to treat or prevent prolapse (grade C) or dyspareunia (grade C). No randomized trials have evaluated the effect of pelvic

  17. Pegasus Rocket Wing and PHYSX Glove Being Prepared for Stress Loads Testing

    Science.gov (United States)

    1997-01-01

    A technician adjusts the Pegasus Hypersonic Experiment (PHYSX) Project's Pegasus rocket wing with attached PHYSX glove before a loads-test at Scaled Composites, Inc., in Mojave, California, in January 1997. For the test, technicians slowly filled water bags beneath the wing to create the pressure, or 'wing-loading,' required to determine whether the wing could withstand its design limit for stress. The wing sits in a wooden triangular frame which serves as the test-rig, mounted to the floor atop the waterbags. PHYSX was launched aboard a Pegasus rocket on October 22, 1998. Pegasus is an air-launched space booster produced by Orbital Sciences Corporation and Hercules Aerospace Company (initially; later, Alliant Tech Systems) to provide small satellite users with a cost-effective, flexible, and reliable method for placing payloads into low earth orbit. Pegasus has been used to launch a number of satellites and the PHYSX experiment. That experiment consisted of a smooth glove installed on the first-stage delta wing of the Pegasus. The glove was used to gather data at speeds of up to Mach 8 and at altitudes approaching 200,000 feet. The flight took place on October 22, 1998. The PHYSX experiment focused on determining where boundary-layer transition occurs on the glove and on identifying the flow mechanism causing transition over the glove. Data from this flight-research effort included temperature, heat transfer, pressure measurements, airflow, and trajectory reconstruction. Hypersonic flight-research programs are an approach to validate design methods for hypersonic vehicles (those that fly more than five times the speed of sound, or Mach 5). Dryden Flight Research Center, Edwards, California, provided overall management of the glove experiment, glove design, and buildup. Dryden also was responsible for conducting the flight tests. Langley Research Center, Hampton, Virginia, was responsible for the design of the aerodynamic glove as well as development of sensor and

  18. Recognition and Management of Nonrelaxing Pelvic Floor Dysfunction

    Science.gov (United States)

    Faubion, Stephanie S.; Shuster, Lynne T.; Bharucha, Adil E.

    2012-01-01

    Nonrelaxing pelvic floor dysfunction is not widely recognized. Unlike in pelvic floor disorders caused by relaxed muscles (eg, pelvic organ prolapse or urinary incontinence, both of which often are identified readily), women affected by nonrelaxing pelvic floor dysfunction may present with a broad range of nonspecific symptoms. These may include pain and problems with defecation, urination, and sexual function, which require relaxation and coordination of pelvic floor muscles and urinary and anal sphincters. These symptoms may adversely affect quality of life. Focus on the global symptom complex, rather than the individual symptoms, may help the clinician identify the condition. The primary care provider is in a position to intervene early, efficiently, and effectively by (1) recognizing the range of symptoms that might suggest nonrelaxing pelvic floor dysfunction, (2) educating patients, (3) performing selective tests when needed to confirm the diagnosis, and (4) providing early referral for physical therapy. PMID:22305030

  19. Impact sound insulation improvement of wooden floors on concrete slabs

    DEFF Research Database (Denmark)

    Rasmussen, Birgit; Hoffmeyer, Dan; Hansen, Rói

    2014-01-01

    renovating housing. In Denmark, there are about 1 million dwellings in multi-storey housing. About half of the dwellings are built with timber floors, and the other half with wooden floors on concrete slabs, either in-situ cast or prefabricated hollow-core elements. In a project including mapping of sound...... insulation in the Danish housing stock and investigation of improvement possibilities, a pilot laboratory study of wooden floors on concrete was carried out. The laboratory study included impact sound improvement measurements of full-scale samples (10 m2) fulfilling the conditions in EN ISO 10140....... The measurements indicated up to about 8 dB improvement potential compared to floor constructions typical before the latest change of regulations, namely wooden floors on joists on PE wedges or similar. In addition, tests of small-scale samples (1 m2) – unsuitable for type testing – were performed to provide...

  20. Historical Cavern Floor Rise for All SPR Sites

    Energy Technology Data Exchange (ETDEWEB)

    Moriarty, Dylan Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-09-01

    The Strategic Petroleum Reserve (SPR) contains the largest supply is the largest stockpile of government-owned emergency crude oil in the world. The oil is stored in multiple salt caverns spread over four sites in Louisiana and Texas. Cavern infrastructure near the bottom of the cavern can be damaged from vertical floor movement. This report presents a comprehensive history of floor movements in each cavern. Most of the cavern floor rise rates ranged from 0.5-3.5 ft/yr, however, there were several caverns with much higher rise rates. BH103, BM106, and BH105 had the three highest rise rates. Information from this report will be used to better predict future vertical floor movements and optimally place cavern infrastructure. The reasons for floor rise are not entirely understood and should be investigated.

  1. Free vibration analysis of dragonfly wings using finite element method

    OpenAIRE

    M Darvizeh; A Darvizeh; H Rajabi; A Rezaei

    2016-01-01

    In the present work, investigations on the microstructure and mechanicalproperties of the dragonfly wing are carried out and numerical modelingbased on Finite Element Method (FEM) is developed to predict Flightcharacteristics of dragonfly wings. Vibrational behavior of wings typestructures is immensely important in analysis, design and manufacturing ofsimilar engineering structures. For this purpose natural frequencies andmode shapes are calculated. In addition, the kind of deformation in eac...

  2. Pelvic floor assessment after delivery: how should women be selected?

    Science.gov (United States)

    Soligo, Marco; Livio, Stefania; De Ponti, Elena; Scebba, Ileana; Carpentieri, Federica; Serati, Maurizio; Ferrazzi, Enrico

    2016-11-01

    Pelvic floor dysfunction after delivery is quite common. New mothers deserve to receive targeted care for pelvic floor dysfunction, but how should women who are at risk be identified and selected for treatment? This study investigated risk factors and puerperal health-seeking behaviours to develop a restrictive patient selection model for postpartum pelvic floor dysfunction assessment. This prospective observational study involved women who were at ≥32 weeks gestational age when they delivered in a tertiary referral maternity hospital in Milan, Italy, between July and December 2014. Eligible women were scheduled for a 3-month postnatal pelvic floor clinic. The adherence rate to the pelvic floor clinic and the prevalence of pelvic floor dysfunctions at 3 months postpartum were recorded. Univariable and logistic multivariable analyses were performed to select risk factors for pelvic floor dysfunctions. Risk factors were then tested for sensitivity and specificity for 3-month postpartum pelvic floor dysfunctions. Of 1606 eligible women, 1293 (80.5%) were included in the analysis; 685 puerperal women (53.0%) adhered to the 3-month postnatal pelvic floor clinic; pelvic floor dysfunctions were detected in 238 women (34.7%). Four elements emerged as risk factors: symptoms before pregnancy (OR 1.72, 95% CI 1.15-2.56; p=0.008), symptoms during pregnancy (OR 2.13, 95% CI 1.49-3.06; p<0.0001), vacuum extractor use (OR 1.62, 95% CI 1.04-2.54; p=0.034), and severe perineal tears (OR 19.45, 95% CI 2.42-156.15; p=0.005). The combined sensitivity and specificity for the 4 risk factors were 82% and 39%, respectively. Internal risk factors analysis offers the potential to efficiently restrict patient selection for follow-up. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  3. Pelvic floor tenderness in the etiology of superficial dyspareunia.

    Science.gov (United States)

    Yong, Paul J; Mui, Justin; Allaire, Catherine; Williams, Christina

    2014-11-01

    To calculate the prevalence of pelvic floor tenderness in the population of women with pelvic pain and to determine its implications for symptoms of pelvic pain. We conducted a retrospective review of patients with pelvic pain at a tertiary referral centre. Pelvic floor tenderness was defined as levator ani tenderness on at least one side during single digit pelvic examination. The prevalence of pelvic floor tenderness in this cohort of women with pelvic pain was compared with the prevalence in a cohort of women without pain attending a gynaecology clinic. In the women with pelvic pain, multiple regression was performed to determine which variables were independently associated with pelvic floor tenderness. The prevalence of pelvic floor tenderness was 40% (75/189) in the cohort with pelvic pain, significantly greater than the prevalence of 13% (4/32) in the cohort without pain (OR 4.61; 95% CI 1.55 to 13.7, P = 0.005). On multiple logistic regression, superficial dyspareunia (OR 4.45; 95% CI 1.86 to 10.7, P = 0.001), abdominal wall pain (OR 4.04; 95% CI 1.44 to 11.3, P = 0.005), and bladder base tenderness (OR 4.65; 95% CI 1.87 to 11.6, P = 0.001) were independently associated with pelvic floor tenderness. Pelvic floor tenderness was similarly present in women with or without underlying endometriosis. Pelvic floor tenderness is common in women with pelvic pain, with or without endometriosis, and is a contributor to superficial dyspareunia. Pelvic floor tenderness was also associated with abdominal wall pain and bladder base tenderness, suggesting that nervous system sensitization is involved in the etiology of pelvic floor tenderness.

  4. Investigation and design of a C-Wing passenger aircraft

    Directory of Open Access Journals (Sweden)

    Karan BIKKANNAVAR

    2016-06-01

    Full Text Available A novel nonplanar wing concept called C-Wing is studied and implemented on a commercial aircraft to reduce induced drag which has a significant effect on fuel consumption. A preliminary sizing method which employs an optimization algorithm is utilized. The Airbus A320 aircraft is used as a reference aircraft to evaluate design parameters and to investigate the C-Wing design potential beyond current wing tip designs. An increase in aspect ratio due to wing area reduction at 36m span results in a reduction of required fuel mass by 16%. Also take-off mass savings were obtained for the aircraft with C-Wing configuration. The effect of a variations of height to span ratio (h/b of C-Wings on induced drag factor k, is formulated from a vortex lattice method and literature based equations. Finally the DOC costing methods used by the Association of European Airlines (AEA was applied to the existing A320 aircraft and to the C-Wing configuration obtaining a reduction of 6% in Direct Operating Costs (DOC for the novel concept resulted. From overall outcomes, the C-Wing concept suggests interesting aerodynamic efficiency and stability benefits.

  5. Effects of Canard on the Flowfield over a Wing

    Science.gov (United States)

    Nayebzadeh, Arash

    2015-11-01

    Surface and flowfield pressure measurements have been done over delta wing/canard configuration in a variety of canard vertical and horizontal locations and angles of attack. The experimental model consisted of wing, canard and a body to accommodate pressure tubing and canard rotation mechanism. All the tests have been performed at subsonic velocities and the effect of canard were analyzed through comparison between surface and flowfield pressure distributions. It was found that vortex flow pattern over the wing is dominated mainly by canard vertical position and in some cases, by merging of canard and wing vortices. In addition, the pressure loss induced by canard vortex on the wing surface moves the wing vortex toward the leading edge. In the mid canard configuration, canard and wing vortices merge at x/c greater than 0.5 and as a result of this phenomenon, abrupt pressure loss induces more stable vortex flow over the wing. It is also shown that canard plays a vital role in vortex break down over the wing.

  6. Pelvic floor muscle training as a persistent nursing intervention: Effect on delivery outcome and pelvic floor myodynamia

    Directory of Open Access Journals (Sweden)

    Xin Wang

    2014-03-01

    Conclusion: Persistent nursing intervention for pregnant/postpartum women helped to shorten the second stage of labour and contributed to the recovery of postpartum pelvic floor myodynamia. The influence of this intervention on the delivery mode, and rates of episiotomy and perineal laceration remains unknown. Medical staff should strengthen health education programmes that involve pelvic floor functional rehabilitation.

  7. Accuracy of integrated total pelvic floor ultrasound compared to defaecatory MRI in females with pelvic floor defaecatory dysfunction.

    Science.gov (United States)

    Hainsworth, Alison J; Pilkington, Sophie A; Grierson, Catherine; Rutherford, Elizabeth; Schizas, Alexis M P; Nugent, Karen P; Williams, Andrew B

    2016-12-01

    Defaecatory MRI allows multicompartmental assessment of defaecatory dysfunction but is often inaccessible. Integrated total pelvic floor ultrasound (transperineal, transvaginal, endoanal) may provide a cheap, portable alternative. The accuracy of total pelvic floor ultrasound for anatomical abnormalities when compared with defaecatory MRI was assessed. The dynamic images from 68 females who had undergone integrated total pelvic floor ultrasound and defaecatory MRI between 2009 and 2015 were blindly reviewed. The following were recorded: rectocoele, enterocoele, intussusception and cystocoele. There were 26 rectocoeles on MRI (49 rectocoeles on ultrasound), 24 rectocoeles with intussusception on MRI (19 rectocoeles on ultrasound), 23 enterocoeles on MRI (24 enterocoeles on ultrasound) and 49 cystocoeles on MRI (35 cystocoeles on ultrasound). Sensitivity and specificity of total pelvic floor ultrasound were 81% and 33% for rectocoele, 60% and 91% for intussusception, 65% and 80% for enterocoele and 65% and 84% for cystocoele when compared with defaecatory MRI. This gave a negative-predictive value and positive-predictive value of 74% and 43% for rectocoele, 80% and 79% for intussusception, 82% and 63% for enterocoele and 48% and 91% for cystocoele. Integrated total pelvic floor ultrasound may serve as a screening tool for pelvic floor defaecatory dysfunction; when normal, defaecatory MRI can be avoided, as rectocoele, intussusception and enterocoele are unlikely to be present. Advances in knowledge: This is the first study to compare integrated total pelvic floor ultrasound with defaecatory MRI. The results support the use of integrated total pelvic floor ultrasound as a screening tool for defaecatory dysfunction.

  8. Effect of pelvic floor muscle exercise on pelvic floor muscle activity and voiding functions during pregnancy and the postpartum period.

    Science.gov (United States)

    Kahyaoglu Sut, Hatice; Balkanli Kaplan, Petek

    2016-03-01

    The aim of this study was to investigate the effects of pelvic floor muscle exercise during pregnancy and the postpartum period on pelvic floor muscle activity and voiding functions. Pregnant women (n = 60) were randomly assigned into two groups (Training [n = 30] and Control [n = 30]) using a computer-based system. Pelvic floor muscle strength was measured using a perineometry device. Urinary symptoms were measured using the Urinary Distress Inventory (UDI-6), Incontinence Impact Questionnaire (IIQ-7), and the Overactive Bladder Questionnaire (OAB-q). Voiding functions were measured using uroflowmetry and 3-day voiding diaries. Measurements were obtained at week 28, weeks 36-38 of pregnancy, and postpartum weeks 6-8. Pelvic floor muscle strength significantly decreased during the pregnancy (P pelvic floor muscle strength improvement was significantly higher in the Training group compared to the Control group (P  0.05). However, UDI-6, coping, concern, and total scores of OAB-q were significantly decreased during weeks 36-38 of pregnancy in the Control group (P pelvic floor muscle strength, urinary symptoms, quality of life, and voiding functions. Pelvic floor muscle exercises applied during pregnancy and the postpartum period increase pelvic floor muscle strength and prevent deterioration of urinary symptoms and quality of life in pregnancy. © 2015 Wiley Periodicals, Inc.

  9. Do women with pelvic floor dysfunction referred by gynaecologists and urologists at hospitals complete a pelvic floor muscle training programme?

    DEFF Research Database (Denmark)

    Tibaek, Sigrid; Dehlendorff, Christian

    2013-01-01

    For decades women with pelvic floor dysfunction (PFD) have been referred to pelvic floor muscle training (PFMT), but there is only little information on whether the women complete the programmes and why. The objectives of this study were to investigate to which extent women completed a PFMT...

  10. Improvement of the aerodynamic performance by wing flexibility and elytra–hind wing interaction of a beetle during forward flight

    Science.gov (United States)

    Le, Tuyen Quang; Truong, Tien Van; Park, Soo Hyung; Quang Truong, Tri; Ko, Jin Hwan; Park, Hoon Cheol; Byun, Doyoung

    2013-01-01

    In this work, the aerodynamic performance of beetle wing in free-forward flight was explored by a three-dimensional computational fluid dynamics (CFDs) simulation with measured wing kinematics. It is shown from the CFD results that twist and camber variation, which represent the wing flexibility, are most important when determining the aerodynamic performance. Twisting wing significantly increased the mean lift and camber variation enhanced the mean thrust while the required power was lower than the case when neither was considered. Thus, in a comparison of the power economy among rigid, twisting and flexible models, the flexible model showed the best performance. When the positive effect of wing interaction was added to that of wing flexibility, we found that the elytron created enough lift to support its weight, and the total lift (48.4 mN) generated from the simulation exceeded the gravity force of the beetle (47.5 mN) during forward flight. PMID:23740486

  11. Report of 6th research meeting on basic process of fuel cycle for nuclear fusion reactors, Yayoi Research Group; 3rd expert committee on research of nuclear fusion fuel material correlation basis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In this report, the lecture materials of Yayoi Research Group, 6th research meeting on basic process of fuel cycle for nuclear fusion reactors which was held at the University of Tokyo on March 25, 1996, are collected. This workshop was held also as 3rd expert committee on research of nuclear fusion fuel material correlation basis of Atomic Energy Society of Japan. This workshop has the character of the preparatory meeting for the session on `Interface effect in nuclear fusion energy system` of the international workshop `Interface effect in quantum energy system`, and 6 lectures and one comment were given. The topics were deuterium transport in Mo under deuterium ion implantation, the change of the stratum structure of graphite by hydrogen ion irradiation, the tritium behavior in opposing materials, the basic studies of the irradiation effects of solid breeding materials, the research on the behavior of hydroxyl group on the surface of solid breeding materials, the sweep gas effect on the surface of solid breeding materials, and the dynamic behavior of ion-implanted deuterium in proton-conductive oxides. (K.I.)

  12. Report of 6th research meeting on basic process of fuel cycle for nuclear fusion reactors, Yayoi Research Group; 3rd expert committee on research of nuclear fusion fuel material correlation basis

    International Nuclear Information System (INIS)

    1996-03-01

    In this report, the lecture materials of Yayoi Research Group, 6th research meeting on basic process of fuel cycle for nuclear fusion reactors which was held at the University of Tokyo on March 25, 1996, are collected. This workshop was held also as 3rd expert committee on research of nuclear fusion fuel material correlation basis of Atomic Energy Society of Japan. This workshop has the character of the preparatory meeting for the session on 'Interface effect in nuclear fusion energy system' of the international workshop 'Interface effect in quantum energy system', and 6 lectures and one comment were given. The topics were deuterium transport in Mo under deuterium ion implantation, the change of the stratum structure of graphite by hydrogen ion irradiation, the tritium behavior in opposing materials, the basic studies of the irradiation effects of solid breeding materials, the research on the behavior of hydroxyl group on the surface of solid breeding materials, the sweep gas effect on the surface of solid breeding materials, and the dynamic behavior of ion-implanted deuterium in proton-conductive oxides. (K.I.)

  13. Folding wings like a cockroach: a review of transverse wing folding ensign wasps (Hymenoptera: Evaniidae: Afrevania and Trissevania.

    Directory of Open Access Journals (Sweden)

    István Mikó

    Full Text Available We revise two relatively rare ensign wasp genera, whose species are restricted to Sub-Saharan Africa: Afrevania and Trissevania. Afrevania longipetiolata sp. nov., Trissevania heatherae sp. nov., T. hugoi sp. nov., T. mrimaensis sp. nov. and T. slideri sp. nov. are described, males and females of T. anemotis and Afrevania leroyi are redescribed, and an identification key for Trissevaniini is provided. We argue that Trissevania mrimaensis sp. nov. and T. heatherae sp. nov. populations are vulnerable, given their limited distributions and threats from mining activities in Kenya. We hypothesize that these taxa together comprise a monophyletic lineage, Trissevaniini, tr. nov., the members of which share the ability to fold their fore wings along two intersecting fold lines. Although wing folding of this type has been described for the hind wing of some insects four-plane wing folding of the fore wing has never been documented. The wing folding mechanism and the pattern of wing folds of Trissevaniini is shared only with some cockroach species (Blattodea. It is an interesting coincidence that all evaniids are predators of cockroach eggs. The major wing fold lines of Trissevaniini likely are not homologous to any known longitudinal anatomical structures on the wings of other Evaniidae. Members of the new tribe share the presence of a coupling mechanism between the fore wing and the mesosoma that is composed of a setal patch on the mesosoma and the retinaculum of the fore wing. While the setal patch is an evolutionary novelty, the retinaculum, which originally evolved to facilitate fore and hind wing coupling in Hymenoptera, exemplifies morphological exaptation. We also refine and clarify the Semantic Phenotype approach used in previous taxonomic revisions and explore the consequences of merging new with existing data. The way that semantic statements are formulated can evolve in parallel, alongside improvements to the ontologies themselves.

  14. Basal Complex and Basal Venation of Odonata Wings: Structural Diversity and Potential Role in the Wing Deformation.

    Directory of Open Access Journals (Sweden)

    H Rajabi

    Full Text Available Dragonflies and damselflies, belonging to the order Odonata, are known to be excellent fliers with versatile flight capabilities. The ability to fly over a wide range of speeds, high manoeuvrability and great agility are a few characteristics of their flight. The architecture of the wings and their structural elements have been found to play a major role in this regard. However, the precise influence of individual wing components on the flight performance of these insects remains unknown. The design of the wing basis (so called basal complex and the venation of this part are responsible for particular deformability and specific shape of the wing blade. However, the wing bases are rather different in representatives of different odonate groups. This presumably reflects the dimensions of the wings on one hand, and different flight characteristics on the other hand. In this article, we develop the first three-dimensional (3D finite element (FE models of the proximal part of the wings of typical representatives of five dragonflies and damselflies families. Using a combination of the basic material properties of insect cuticle, a linear elastic material model and a nonlinear geometric analysis, we simulate the mechanical behaviour of the wing bases. The results reveal that although both the basal venation and the basal complex influence the structural stiffness of the wings, it is only the latter which significantly affects their deformation patterns. The use of numerical simulations enabled us to address the role of various wing components such as the arculus, discoidal cell and triangle on the camber formation in flight. Our study further provides a detailed representation of the stress concentration in the models. The numerical analysis presented in this study is not only of importance for understanding structure-function relationship of insect wings, but also might help to improve the design of the wings for biomimetic micro-air vehicles (MAVs.

  15. Cantilever Wings for Modern Aircraft: Some Aspects of Cantilever Wing Construction with Special Reference to Weight and Torsional Stiffness

    Science.gov (United States)

    Stieger, H J

    1929-01-01

    In the foregoing remarks I have made an attempt to touch on some of the structural problems met with in cantilever wings, and dealt rather fully with a certain type of single-spar construction. The experimental test wing was a first attempt to demonstrate the principles of this departure from orthodox methods. The result was a wing both torsionally stiff and of light weight - lighter than a corresponding biplane construction.

  16. A strong pelvic floor is associated with higher rates of sexual activity in women with pelvic floor disorders

    Science.gov (United States)

    Kanter, Gregg; Rogers, Rebecca G; Pauls, Rachel N; Kammerer-Doak, Dorothy; Thakar, Ranee

    2015-01-01

    Introduction and Hypothesis We evaluated the associations between pelvic floor muscle strength and tone with sexual activity and sexual function in women with pelvic floor disorders. Methods This was a secondary analysis of a multicenter study of women with pelvic floor disorders from the US and UK performed to validate the Pelvic Organ Prolapse/Incontinence Sexual Questionnaire, IUGA-Revised (PISQ-IR). Participants were surveyed about whether they were sexually active and completed the PISQ-IR and Female Sexual Function Index (FSFI) questionnaires to assess sexual function. Physical exams included assessment of pelvic floor strength by the Oxford Grading Scale, and assessment of pelvic floor tone per ICS guidelines. Results The cohort of 585 women was middle aged (mean age 54.9 +/−12.1) with 395 (67.5%) reporting sexual activity. Women with a strong pelvic floor (n=275) were more likely to report sexual activity than women with weak strength (n=280) (75.3 vs. 61.8%, ppelvic floor tone was not associated with sexual activity (68.8 vs. 60.2%, normal vs. hypoactive, p=0.08). After multivariable analysis, a strong pelvic floor remained predictive of sexual activity (OR 1.89, CI 1.18–3.03, ppelvic floor was associated with higher scores on the PISQ-IR domain of condition impact (Parameter Estimate 0.20+/−0.09, P=0.04), and FSFI orgasm domain (PE 0.51+/−0.17, P=0.004). Conclusion A strong pelvic floor is associated with higher rates of sexual activity as well as higher sexual function scores on the condition impact domain of the PISQ-IR and orgasm domain of the FSFI. PMID:25994625

  17. Demonstration of an in situ morphing hyperelliptical cambered span wing mechanism

    International Nuclear Information System (INIS)

    Manzo, Justin; Garcia, Ephrahim

    2010-01-01

    Research on efficient shore bird morphology inspired the hyperelliptical cambered span (HECS) wing, a crescent-shaped, aft-swept wing with vertically oriented wingtips. The wing reduces vorticity-induced circulation loss and outperforms an elliptical baseline when planar. Designed initially as a rigid wing, the HECS wing makes use of morphing to transition from a planar to a furled configuration, similar to that of a continuously curved winglet, in flight. A morphing wing concept mechanism is presented, employing shape memory alloy actuators to create a discretized curvature approximation. The aerodynamics for continuous wing shapes is validated quasi-statically through wind tunnel testing, showing enhanced planar HECS wing lift-to-drag performance over an elliptical wing, with the furled HECS wing showing minimal enhancements beyond this point. Wind tunnel tests of the active morphing wing prove the mechanism capable of overcoming realistic loading, while further testing may be required to establish aerodynamic merits of the HECS wing morphing maneuver

  18. Assessment of the effect of pelvic floor exercises on pelvic floor muscle strength using ultrasonography in patients with urinary incontinence: a prospective randomized controlled trial

    OpenAIRE

    Tosun, Ozge Celiker; Solmaz, Ulas; Ekin, Atalay; Tosun, Gokhan; Gezer, Cenk; Ergenoglu, Ahmet Mete; Yeniel, Ahmet Ozgur; Mat, Emre; Malkoc, Mehtap; Askar, Niyazi

    2016-01-01

    [Purpose] The aim of this study was to evaluate whether the effect of pelvic floor exercises on pelvic floor muscle strength could be detected via ultrasonography in patients with urinary incontinence. [Subjects and Methods] Of 282 incontinent patients, 116 participated in the study and were randomly divided into a pelvic floor muscle training (n=65) group or control group (n=51). The pelvic floor muscle training group was given pelvic floor exercise training for 12 weeks. Both groups were ev...

  19. Biomechanics of smart wings in a bat robot: morphing wings using SMA actuators

    International Nuclear Information System (INIS)

    Colorado, J; Barrientos, A; Rossi, C; Breuer, K S

    2012-01-01

    This paper presents the design of a bat-like micro aerial vehicle with actuated morphing wings. NiTi shape memory alloys (SMAs) acting as artificial biceps and triceps muscles are used for mimicking the morphing wing mechanism of the bat flight apparatus. Our objective is twofold. Firstly, we have implemented a control architecture that allows an accurate and fast SMA actuation. This control makes use of the electrical resistance measurements of SMAs to adjust morphing wing motions. Secondly, the feasibility of using SMA actuation technology is evaluated for the application at hand. To this purpose, experiments are conducted to analyze the control performance in terms of nominal and overloaded operation modes of the SMAs. This analysis includes: (i) inertial forces regarding the stretchable wing membrane and aerodynamic loads, and (ii) uncertainties due to impact of airflow conditions over the resistance–motion relationship of SMAs. With the proposed control, morphing actuation speed can be increased up to 2.5 Hz, being sufficient to generate lift forces at a cruising speed of 5 m s −1 . (paper)

  20. Biomechanics of smart wings in a bat robot: morphing wings using SMA actuators.

    Science.gov (United States)

    Colorado, J; Barrientos, A; Rossi, C; Bahlman, J W; Breuer, K S

    2012-09-01

    This paper presents the design of a bat-like micro aerial vehicle with actuated morphing wings. NiTi shape memory alloys (SMAs) acting as artificial biceps and triceps muscles are used for mimicking the morphing wing mechanism of the bat flight apparatus. Our objective is twofold. Firstly, we have implemented a control architecture that allows an accurate and fast SMA actuation. This control makes use of the electrical resistance measurements of SMAs to adjust morphing wing motions. Secondly, the feasibility of using SMA actuation technology is evaluated for the application at hand. To this purpose, experiments are conducted to analyze the control performance in terms of nominal and overloaded operation modes of the SMAs. This analysis includes: (i) inertial forces regarding the stretchable wing membrane and aerodynamic loads, and (ii) uncertainties due to impact of airflow conditions over the resistance-motion relationship of SMAs. With the proposed control, morphing actuation speed can be increased up to 2.5 Hz, being sufficient to generate lift forces at a cruising speed of 5 m s(-1).

  1. A parametric wing design study for a modern laminar flow wing

    Science.gov (United States)

    Koegler, J. A., Jr.

    1979-01-01

    The results of a parametric wing design study using a modern laminar flow airfoil designed to exhibit desirable stall characteristics while maintaining high cruise performance are presented. It was found that little is sacrificed in cruise performance when satisfying the stall margin requirements if a taper ratio of 0.65 or greater is used.

  2. SUPERDENSE MASSIVE GALAXIES IN WINGS LOCAL CLUSTERS

    International Nuclear Information System (INIS)

    Valentinuzzi, T.; D'Onofrio, M.; Fritz, J.; Poggianti, B. M.; Bettoni, D.; Fasano, G.; Moretti, A.; Omizzolo, A.; Varela, J.; Cava, A.; Couch, W. J.; Dressler, A.; Moles, M.; Kjaergaard, P.; Vanzella, E.

    2010-01-01

    Massive quiescent galaxies at z > 1 have been found to have small physical sizes, and hence to be superdense. Several mechanisms, including minor mergers, have been proposed for increasing galaxy sizes from high- to low-z. We search for superdense massive galaxies in the WIde-field Nearby Galaxy-cluster Survey (WINGS) of X-ray selected galaxy clusters at 0.04 10 M sun , are mostly S0 galaxies, have a median effective radius (R e ) = 1.61 ± 0.29 kpc, a median Sersic index (n) = 3.0 ± 0.6, and very old stellar populations with a median mass-weighted age of 12.1 ± 1.3 Gyr. We calculate a number density of 2.9 x 10 -2 Mpc -3 for superdense galaxies in local clusters, and a hard lower limit of 1.3 x 10 -5 Mpc -3 in the whole comoving volume between z = 0.04 and z = 0.07. We find a relation between mass, effective radius, and luminosity-weighted age in our cluster galaxies, which can mimic the claimed evolution of the radius with redshift, if not properly taken into account. We compare our data with spectroscopic high-z surveys and find that-when stellar masses are considered-there is consistency with the local WINGS galaxy sizes out to z ∼ 2, while a discrepancy of a factor of 3 exists with the only spectroscopic z > 2 study. In contrast, there is strong evidence for a large evolution in radius for the most massive galaxies with M * > 4 x 10 11 M sun compared to similarly massive galaxies in WINGS, i.e., the brightest cluster galaxies.

  3. [SHOULD EVERY WOMAN AFTER LABOR BE OFFERED PELVIC FLOOR PHYSIOTHERAPY?

    Science.gov (United States)

    Eisenberg, Vered; Kafri, Rachel

    2018-01-01

    Pelvic floor damage can occur during pregnancy, during childbirth or post-partum, and may be expressed by symptoms such as urinary incontinence, fecal and gas incontinence, sexual dysfunction, pelvic organ prolapse and chronic pelvic pain. Some of the symptoms, which manifest later in a woman's life, will go unrecognized in the immediate postpartum period. Most women do not mention their general health, unless specifically asked. Physiotherapists, who are adept with the anatomy of the musculoskeletal system and the ability to diagnose unique differences, can aid in the diagnosis and treatment of postpartum pelvic floor problems. Monitoring, pelvic floor physiotherapy and exercise can be effective both in treatment and prevention of functional disorders of the pelvic floor. In this article, we will discuss pelvic floor problems and their appearance throughout pregnancy and childbirth, and the means of treatment from the physiotherapist's perspective. We raise the question as to whether all postpartum women could benefit from a training program of pelvic floor muscles. Pelvic floor physiotherapy is included in the health basket in Israel, but is not broadly utilized. Wider use could be adopted, particularly in light of the latest research evidence.

  4. Floor-Fractured Craters through Machine Learning Methods

    Science.gov (United States)

    Thorey, C.

    2015-12-01

    Floor-fractured craters are impact craters that have undergone post impact deformations. They are characterized by shallow floors with a plate-like or convex appearance, wide floor moats, and radial, concentric, and polygonal floor-fractures. While the origin of these deformations has long been debated, it is now generally accepted that they are the result of the emplacement of shallow magmatic intrusions below their floor. These craters thus constitute an efficient tool to probe the importance of intrusive magmatism from the lunar surface. The most recent catalog of lunar-floor fractured craters references about 200 of them, mainly located around the lunar maria Herein, we will discuss the possibility of using machine learning algorithms to try to detect new floor-fractured craters on the Moon among the 60000 craters referenced in the most recent catalogs. In particular, we will use the gravity field provided by the Gravity Recovery and Interior Laboratory (GRAIL) mission, and the topographic dataset obtained from the Lunar Orbiter Laser Altimeter (LOLA) instrument to design a set of representative features for each crater. We will then discuss the possibility to design a binary supervised classifier, based on these features, to discriminate between the presence or absence of crater-centered intrusion below a specific crater. First predictions from different classifier in terms of their accuracy and uncertainty will be presented.

  5. Effects of boundary layer forcing on wing-tip vortices

    Science.gov (United States)

    Shaw-Ward, Samantha

    The nature of turbulence within wing-tip vortices has been a topic of research for decades, yet accurate measurements of Reynolds stresses within the core are inherently difficult due to the bulk motion wandering caused by initial and boundary conditions in wind tunnels. As a result, characterization of a vortex as laminar or turbulent is inconclusive and highly contradicting. This research uses several experimental techniques to study the effects of broadband turbulence, introduced within the wing boundary layer, on the development of wing-tip vortices. Two rectangular wings with a NACA 0012 profile were fabricated for the use of this research. One wing had a smooth finish and the other rough, introduced by P80 grade sandpaper. Force balance measurements showed a small reduction in wing performance due to surface roughness for both 2D and 3D configurations, although stall characteristics remained relatively unchanged. Seven-hole probes were purpose-built and used to assess the mean velocity profiles of the vortices five chord lengths downstream of the wing at multiple angles of attack. Above an incidence of 4 degrees, the vortices were nearly axisymmetric, and the wing roughness reduced both velocity gradients and peak velocity magnitudes within the vortex. Laser Doppler velocimetry was used to further assess the time-resolved vortex at an incidence of 5 degrees. Evidence of wake shedding frequencies and wing shear layer instabilities at higher frequencies were seen in power spectra within the vortex. Unlike the introduction of freestream turbulence, wing surface roughness did not appear to increase wandering amplitude. A new method for removing the effects of vortex wandering is proposed with the use of carefully selected high-pass filters. The filtered data revealed that the Reynolds stress profiles of the vortex produced by the smooth and rough wing were similar in shape, with a peak occurring away from the vortex centre but inside of the core. Single hot

  6. Folding in and out: passive morphing in flapping wings.

    Science.gov (United States)

    Stowers, Amanda K; Lentink, David

    2015-03-25

    We present a new mechanism for passive wing morphing of flapping wings inspired by bat and bird wing morphology. The mechanism consists of an unactuated hand wing connected to the arm wing with a wrist joint. Flapping motion generates centrifugal accelerations in the hand wing, forcing it to unfold passively. Using a robotic model in hover, we made kinematic measurements of unfolding kinematics as functions of the non-dimensional wingspan fold ratio (2-2.5) and flapping frequency (5-17 Hz) using stereo high-speed cameras. We find that the wings unfold passively within one to two flaps and remain unfolded with only small amplitude oscillations. To better understand the passive dynamics, we constructed a computer model of the unfolding process based on rigid body dynamics, contact models, and aerodynamic correlations. This model predicts the measured passive unfolding within about one flap and shows that unfolding is driven by centrifugal acceleration induced by flapping. The simulations also predict that relative unfolding time only weakly depends on flapping frequency and can be reduced to less than half a wingbeat by increasing flapping amplitude. Subsequent dimensional analysis shows that the time required to unfold passively is of the same order of magnitude as the flapping period. This suggests that centrifugal acceleration can drive passive unfolding within approximately one wingbeat in small and large wings. Finally, we show experimentally that passive unfolding wings can withstand impact with a branch, by first folding and then unfolding passively. This mechanism enables flapping robots to squeeze through clutter without sophisticated control. Passive unfolding also provides a new avenue in morphing wing design that makes future flapping morphing wings possibly more energy efficient and light-weight. Simultaneously these results point to possible inertia driven, and therefore metabolically efficient, control strategies in bats and birds to morph or recover

  7. Nuclear wastes beneath the deep sea floor

    International Nuclear Information System (INIS)

    Bishop, W.P.; Hollister, C.D.

    1974-01-01

    Projections of energy demands for the year 2000 show that nuclear power will likely be one of our energy sources. But the benefits of nuclear power must be balanced against the drawbacks of its by-product: high-level wastes. While it may become possible to completely destroy or eliminate these wastes, it is at least equally possible that we may have to dispose of them on earth in such a way as to assure their isolation from man for periods of the order of a million years. Undersea regions in the middle of tectonic plates and in the approximate center of major current gyres offer some conceptual promise for waste disposal because of their geologic stability and comparatively low organic productivity. The advantages of this concept and the types of detailed information needed for its accurate assessment are discussed. The technical feasibility of permanent disposal beneath the deep sea floor cannot be accurately assessed with present knowledge, and there is a need for a thorough study of the types and rates of processes that affect this part of the earth's surface. Basic oceanographic research aimed at understanding these processes is yielding answers that apply to this societal need. (U.S.)

  8. Video change detection for fixed wing UAVs

    Science.gov (United States)

    Bartelsen, Jan; Müller, Thomas; Ring, Jochen; Mück, Klaus; Brüstle, Stefan; Erdnüß, Bastian; Lutz, Bastian; Herbst, Theresa

    2017-10-01

    In this paper we proceed the work of Bartelsen et al.1 We present the draft of a process chain for an image based change detection which is designed for videos acquired by fixed wing unmanned aerial vehicles (UAVs). From our point of view, automatic video change detection for aerial images can be useful to recognize functional activities which are typically caused by the deployment of improvised explosive devices (IEDs), e.g. excavations, skid marks, footprints, left-behind tooling equipment, and marker stones. Furthermore, in case of natural disasters, like flooding, imminent danger can be recognized quickly. Due to the necessary flight range, we concentrate on fixed wing UAVs. Automatic change detection can be reduced to a comparatively simple photogrammetric problem when the perspective change between the "before" and "after" image sets is kept as small as possible. Therefore, the aerial image acquisition demands a mission planning with a clear purpose including flight path and sensor configuration. While the latter can be enabled simply by a fixed and meaningful adjustment of the camera, ensuring a small perspective change for "before" and "after" videos acquired by fixed wing UAVs is a challenging problem. Concerning this matter, we have performed tests with an advanced commercial off the shelf (COTS) system which comprises a differential GPS and autopilot system estimating the repetition accuracy of its trajectory. Although several similar approaches have been presented,23 as far as we are able to judge, the limits for this important issue are not estimated so far. Furthermore, we design a process chain to enable the practical utilization of video change detection. It consists of a front-end of a database to handle large amounts of video data, an image processing and change detection implementation, and the visualization of the results. We apply our process chain on the real video data acquired by the advanced COTS fixed wing UAV and synthetic data. For the

  9. How the pterosaur got its wings.

    Science.gov (United States)

    Tokita, Masayoshi

    2015-11-01

    Throughout the evolutionary history of life, only three vertebrate lineages took to the air by acquiring a body plan suitable for powered flight: birds, bats, and pterosaurs. Because pterosaurs were the earliest vertebrate lineage capable of powered flight and included the largest volant animal in the history of the earth, understanding how they evolved their flight apparatus, the wing, is an important issue in evolutionary biology. Herein, I speculate on the potential basis of pterosaur wing evolution using recent advances in the developmental biology of flying and non-flying vertebrates. The most significant morphological features of pterosaur wings are: (i) a disproportionately elongated fourth finger, and (ii) a wing membrane called the brachiopatagium, which stretches from the posterior surface of the arm and elongated fourth finger to the anterior surface of the leg. At limb-forming stages of pterosaur embryos, the zone of polarizing activity (ZPA) cells, from which the fourth finger eventually differentiates, could up-regulate, restrict, and prolong expression of 5'-located Homeobox D (Hoxd) genes (e.g. Hoxd11, Hoxd12, and Hoxd13) around the ZPA through pterosaur-specific exploitation of sonic hedgehog (SHH) signalling. 5'Hoxd genes could then influence downstream bone morphogenetic protein (BMP) signalling to facilitate chondrocyte proliferation in long bones. Potential expression of Fgf10 and Tbx3 in the primordium of the brachiopatagium formed posterior to the forelimb bud might also facilitate elongation of the phalanges of the fourth finger. To establish the flight-adapted musculoskeletal morphology shared by all volant vertebrates, pterosaurs probably underwent regulatory changes in the expression of genes controlling forelimb and pectoral girdle musculoskeletal development (e.g. Tbx5), as well as certain changes in the mode of cell-cell interactions between muscular and connective tissues in the early phase of their evolution. Developmental data now

  10. 77 FR 64526 - National Cancer Institute; Notice of Meetings

    Science.gov (United States)

    2012-10-22

    ... issues. Place: National Institutes of Health, 9000 Rockville Pike, Building 31, C Wing, 6th Floor... professional affiliation of the interested person. In the interest of security, NIH has instituted stringent procedures for entrance onto the NIH campus. All visitor vehicles, including taxicabs, hotel, and airport...

  11. 78 FR 50067 - National Institute of Nursing Research; Notice of Meeting

    Science.gov (United States)

    2013-08-16

    ... Issues. Place: National Institutes of Health, Building 31, 31 Center Drive, 6th Floor, C Wing, Room 6... of the interested person. In the interest of security, NIH has instituted stringent procedures for entrance onto the NIH campus. All visitor vehicles, including taxicabs, hotel, and airport shuttles will be...

  12. How wing kinematics affect power requirements and aerodynamic force production in a robotic bat wing

    International Nuclear Information System (INIS)

    Bahlman, Joseph W; Swartz, Sharon M; Breuer, Kenneth S

    2014-01-01

    Bats display a wide variety of behaviors that require different amounts of aerodynamic force. To control and modulate aerodynamic force, bats change wing kinematics, which, in turn, may change the power required for wing motion. There are many kinematic mechanisms that bats, and other flapping animals, can use to increase aerodynamic force, e.g. increasing wingbeat frequency or amplitude. However, we do not know if there is a difference in energetic cost between these different kinematic mechanisms. To assess the relationship between mechanical power input and aerodynamic force output across different isolated kinematic parameters, we programmed a robotic bat wing to flap over a range of kinematic parameters and measured aerodynamic force and mechanical power. We systematically varied five kinematic parameters: wingbeat frequency, wingbeat amplitude, stroke plane angle, downstroke ratio, and wing folding. Kinematic values were based on observed values from free flying Cynopterus brachyotis, the species on which the robot was based. We describe how lift, thrust, and power change with increases in each kinematic variable. We compare the power costs associated with generating additional force through the four kinematic mechanisms controlled at the shoulder, and show that all four mechanisms require approximately the same power to generate a given force. This result suggests that no single parameter offers an energetic advantage over the others. Finally, we show that retracting the wing during upstroke reduces power requirements for flapping and increases net lift production, but decreases net thrust production. These results compare well with studies performed on C. brachyotis, offering insight into natural flight kinematics. (paper)

  13. Association between preterm labour and pelvic floor muscle function.

    Science.gov (United States)

    Aran, Turhan; Pekgöz, Ipek; Bozkaya, Hasan; Osmanagaoglu, Mehmet A

    2018-03-23

    We hypothesised that the pressure on the cervix increases with advancing gestation and it may lead to a cervical shortening and cause preterm labour in women with weak pelvic floor muscles. The aim of this prospective study was to measure vaginal resting pressure and pelvic floor muscle strength in the first trimester of pregnancy and to investigate their effects on labour. A study was conducted on the pregnant women with a low risk for preterm birth. The pelvic floor muscle strength and vaginal resting pressure were assessed in 320 pregnant women at their first trimester with a vaginal pressure measurement device. Fifty-two pregnant women were hospitalised for tocolytic therapy because of spontaneous preterm labour. Thirty-two of them (10.2%) had a preterm delivery despite the tocolytic therapy. Both the vaginal resting pressure (p = .009, 95%CI: 0.8; 5.9) and the pelvic floor muscle strength (p = .01, 95%CI: 3.5; 13.1) were significantly lower in the women with a preterm labour. Impact statement What is already known on this subject? The pelvic floor muscles have an essential role in continence and provide support to the pelvic organs. They also have an impact on labour. The pelvic floor muscles should distend to allow the passage of the foetus during labour. The rotation and flexion of the foetal head is due to the pelvic floor resistance. The effect of a vaginal birth on the pelvic floor's function is readily understood. On the other hand, the effect of the pelvic floor muscle function on labour is still controversial. What do the results of this study add? This prospective study showed that there is a negative association between the pelvic floor muscle strength and preterm labour. This is the first clinical study indicating that weak pelvic floor muscles may cause a preterm labour. What are the implications of these findings for clinical practice and/or further research? Pelvic floor physical therapy may be an alternative preventive strategy to reduce

  14. Pelvic Floor Physical Therapy for Vulvodynia: A Clinician's Guide.

    Science.gov (United States)

    Prendergast, Stephanie A

    2017-09-01

    Vulvar pain affects up to 20% of women at some point in their lives, and most women with vulvar pain have associated pelvic floor impairments. Pelvic floor dysfunction is associated with significant functional limitations in women by causing painful intercourse and urinary, bowel, and sexual dysfunction. A quick screening of the pelvic floor muscles can be performed in the gynecology office and should be used when patients report symptoms of pelvic pain. It is now known the vulvar pain syndromes are heterogeneous in origin; therefore, successful treatment plans are multimodal and include physical therapy. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Late orbital floor implant migration presenting as recurrent episcleritis.

    Science.gov (United States)

    Joseph, Sobha; Cheung, David

    2014-04-01

    A 53-year-old patient presented with recurrent epicleritis of the right eye for 6 months and progressive diplopia. He had a past history of orbital floor repair over 30 years. A CT scan showed a radiodense migrated orbital floor sheet implant in the maxillary sinus causing obstruction of the maxillary sinus ostium, secondary maxillary sinusitis with retrobulbar involvement. The silastic orbital implant was removed via a Caldwell Luc approach and resolution of the patient's symptoms and signs quickly ensued. We discuss this late complication of orbital floor fracture repair presenting initially as recurrent episcleritis and maxillary sinusitis with intraorbital extension. This report also emphasizes the importance of history taking.

  16. An architecture for agile shop floor control systems

    DEFF Research Database (Denmark)

    Langer, Gilad; Alting, Leo

    2000-01-01

    Changes in markets and global business trends affect the manufacturing environment in infinite ways. These changes have brought about the need for a paradigm shift to reassess the manner in which manufacturing systems are developed and operated. New theories and concepts present solutions to enable...... as shop floor control. This paper presents the Holonic Multi-cell Control System (HoMuCS) architecture that allows for design and development of holonic shop floor control systems. The HoMuCS is a shop floor control system which is sometimes referred to as a manufacturing execution system...

  17. Morphing Wing Design with an Innovative Three-Dimensional Warping Actuation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced wing configurations where traditional control surfaces are replaced by dynamically controlled distribution of wing twist and/or camber can provide...

  18. Variable Geometry Aircraft Wing Supported by Struts And/Or Trusses

    Science.gov (United States)

    Melton, John E. (Inventor); Dudley, Michael R. (Inventor)

    2016-01-01

    The present invention provides an aircraft having variable airframe geometry for accommodating efficient flight. The aircraft includes an elongated fuselage, an oblique wing pivotally connected with said fuselage, a wing pivoting mechanism connected with said oblique wing and said fuselage, and a brace operably connected between said oblique wing and said fuselage. The present invention also provides an aircraft having an elongated fuselage, an oblique wing pivotally connected with said fuselage, a wing pivoting mechanism connected with said oblique wing and said fuselage, a propulsion system pivotally connected with said oblique wing, and a brace operably connected between said propulsion system and said fuselage.

  19. Rehabilitation of the short pelvic floor. II: Treatment of the patient with the short pelvic floor.

    Science.gov (United States)

    FitzGerald, M P; Kotarinos, R

    2003-10-01

    Several urogynecologic syndromes are associated with the clinical finding of a short, painful, tender and weak pelvic floor and a variety of connective tissue abnormalities. Techniques for rehabilitation include the avoidance of perpetuating factors, rehabilitation of extrapelvic musculoskeletal abnormalities, the use of manual techniques and needling to promote resolution of connective tissue problems, closure of any diastasis recti, and transvaginal/transrectal manual release of muscular trigger points and contractures. Therapy can be facilitated by pudendal or epidural nerve block. Patients contribute to their success through home maintenance programs.

  20. Assessment of slip resistance under footwear materials, tread designs, floor contamination, and floor inclination conditions.

    Science.gov (United States)

    Li, Kai Way; Chen, Chih-Yong; Chen, Ching Chung; Liu, Liwen

    2012-01-01

    Slip and fall incidences are common in our daily lives. They are not only important environmental safety issues but also important occupational safety and health problems. The purpose of this study was to use the Brungraber Mark II to measure the friction so as to investigate the effects of the shoe sole, surface condition and the inclined angle of the floor and their interactions on friction coefficient. The results of the study showed the effects of all the main factors and their interactions were significant (p<0.001). Engineering designs & ergonomic interventions in slip & fall prevention should take these factors in full consideration.

  1. Numerical simulation of X-wing type biplane flapping wings in 3D using the immersed boundary method

    International Nuclear Information System (INIS)

    Tay, W B; Van Oudheusden, B W; Bijl, H

    2014-01-01

    The numerical simulation of an insect-sized ‘X-wing’ type biplane flapping wing configuration is performed in 3D using an immersed boundary method solver at Reynolds numbers equal to 1000 (1 k) and 5 k, based on the wing's root chord length. This X-wing type flapping configuration draws its inspiration from Delfly, a bio-inspired ornithopter MAV which has two pairs of wings flapping in anti-phase in a biplane configuration. The objective of the present investigation is to assess the aerodynamic performance when the original Delfly flapping wing micro-aerial vehicle (FMAV) is reduced to the size of an insect. Results show that the X-wing configuration gives more than twice the average thrust compared with only flapping the upper pair of wings of the X-wing. However, the X-wing's average thrust is only 40% that of the upper wing flapping at twice the stroke angle. Despite this, the increased stability which results from the smaller lift and moment variation of the X-wing configuration makes it more suited for sharp image capture and recognition. These advantages make the X-wing configuration an attractive alternative design for insect-sized FMAVS compared to the single wing configuration. In the Reynolds number comparison, the vorticity iso-surface plot at a Reynolds number of 5 k revealed smaller, finer vortical structures compared to the simulation at 1 k, due to vortices’ breakup. In comparison, the force output difference is much smaller between Re = 1 k and 5 k. Increasing the body inclination angle generates a uniform leading edge vortex instead of a conical one along the wingspan, giving higher lift. Understanding the force variation as the body inclination angle increases will allow FMAV designers to optimize the thrust and lift ratio for higher efficiency under different operational requirements. Lastly, increasing the spanwise flexibility of the wings increases the thrust slightly but decreases the efficiency. The thrust result is similar

  2. [Continuous improvement of portable domestic pelvic floor neuromuscular electrical stimulation on the pelvic floor function of patients with urinary incontinence].

    Science.gov (United States)

    Sun, Zhijing; Zhu, Lan; Lang, Jinghe; Wang, Wei; Shi, Honghui; Pang, Hongxia; Shi, Xinwen

    2015-12-01

    To evaluate continuous improvement of portable domestic pelvic floor neuromuscular electrical stimulation on the pelvic floor function of patients with stress urinary incontinence after short-term pelvic floor electrophysiological treatment in hospital. Totally 60 women with stress urinary incontinence were recruited for this randomized controlled trial. The control group including a total of 30 patients, only received 4 weeks pelvic floor electrophysiological treatment in the hospital. Family consolidation treatment group (experimental group) including 30 patients, after 4-week treatment in hospital, received 12-week of pelvic floor neuromuscular electrical stimulation using portable electrical stimulator at home under the guidance of doctors. In post-treatment 6 months and 9 months, 1-hour pad test was measured for urine leakage, pelvic floor electrical physiological parameters were assessed, and subjective improvement of symptoms of urinary incontinence were evaluated. All these data were analysed to compare the effect of the two groups. In 9 months after treatment, average change of urine leakage, the control group and experiment group were (75±24)% versus (99±3)%, the difference was statistically significant (Pcontinuous improvement of pelvic floor function.

  3. Wing design for light transport aircraft with improved fuel economy

    Energy Technology Data Exchange (ETDEWEB)

    Welte, D.; Birrenbach, R.; Haberland, W.

    An advanced technology wing has been designed for a light utility and commuter service aircraft with the requirements for economy, safety and flexibility. Trade-off studies give optimum area and aspect-ratio of the wing. A new airfoil was developed to fulfill the performance requirements. Wing planform and twist were chosen to give high maximum lift, low drag and good stall characteristics. Preset ailerons were optimized for wheel forces and lateral control. The applied aerodynamic methods, including two- and three-dimensional wind tunnel tests are shown. Various structural configurations of the wing and various flap systems are evaluated. The cantilever tapered wing and a Fowler-flap with a two-lever mechanism were found to be the most economic ones. The wing was constructed and flight-tested with a modified Dornier Do 28 Skyservant as a test bed. The new wing is being applied to a family of light transport aircraft. Finally, aircraft with the new wing are compared performancewise with contemporary aircraft.

  4. Design and Testing of Aeroelastically Tailored Wings Under Maneuver Loading

    NARCIS (Netherlands)

    Werter, N.P.M.; Sodja, J.; De Breuker, R.

    2016-01-01

    The goal of the present paper is to provide experimental validation data for the aeroelastic analysis of composite aeroelastically tailored wings with a closed-cell cross-sectional structure. Several rectangular wings with differ- ent skin thicknesses and composite layups are designed in order to

  5. Optimisation of the Sekwa blended-wing-Body research UAV

    CSIR Research Space (South Africa)

    Broughton, BA

    2008-10-01

    Full Text Available A variable stability, blended-wing-body research mini-UAV was developed at the CSIR in South Africa. The purpose of the UAV was to study some of the aerodynamic design and control issues associated with flying wing geometries and to develop a...

  6. Flapping-wing mechanical butterfly on a wheel

    Science.gov (United States)

    Godoy-Diana, Ramiro; Thiria, Benjamin; Pradal, Daniel

    2009-11-01

    We examine the propulsive performance of a flapping-wing device turning on a ``merry-go-round'' type base. The two-wing flapper is attached to a mast that is ball-bearing mounted to a central shaft in such a way that the thrust force produced by the wings makes the flapper turn around this shaft. The oscillating lift force produced by the flapping wings is aligned with the mast to avoid vibration of the system. A turning contact allows to power the motor that drives the wings. We measure power consumption and cruising speed as a function of flapping frequency and amplitude as well as wing flexibility. The design of the wings permits to change independently their flexibility in the span-wise and chord-wise directions and PIV measurements in various planes let us examine the vorticity field around the device. A complete study of the effect of wing flexibility on the propulsive performance of the system will be presented at the conference.

  7. Use of wing morphometry for the discrimination of some Cerceris ...

    African Journals Online (AJOL)

    The outline analysis, in which geometric and traditional morphometry potentials are insufficient, was performed by using the Fourier transformation. As a result of the comprehensive wing morphometry study, it was found that both Cerceris species can be distinguished according to their wing structures and the metric ...

  8. Energy-based Aeroelastic Analysis and Optimisation of Morphing Wings

    NARCIS (Netherlands)

    De Breuker, R.

    2011-01-01

    Morphing aircraft can change their shape radically when confronted with a variety of conflicting flight conditions throughout their mission. For instance the F-14 Tomcat fighter aircraft, known from the movie Top Gun, was able to sweep its wings from a straight wing configuration to a highly swept

  9. COLIBRI : A hovering flapping twin-wing robot

    NARCIS (Netherlands)

    Roshanbin, A.; Altartouri, H.; Karasek, M.; Preumont, André

    2017-01-01

    This paper describes the results of a six-year project aiming at designing and constructing a flapping twin-wing robot of the size of hummingbird (Colibri in French) capable of hovering. Our prototype has a total mass of 22 g, a wing span of 21 cm and a flapping frequency of 22 Hz; it is actively

  10. Design, Development and Testing of Shape Shifting Wing Model

    Directory of Open Access Journals (Sweden)

    Dean Ninian

    2017-11-01

    Full Text Available The design and development of morphing (shape shifting aircraft wings—an innovative technology that has the potential to increase the aerodynamic efficiency and reduce noise signatures of aircrafts—was carried out. This research was focused on reducing lift-induced drag at the flaps of the aerofoil and to improve the design to achieve the optimum aerodynamic efficiency. Simulation revealed a 10.8% coefficient of lift increase for the initial morphing wing and 15.4% for the optimized morphing wing as compared to conventional wing design. At angles of attack of 0, 5, 10 and 15 degrees, the optimized wing has an increase in lift-to-drag ratio of 18.3%, 10.5%, 10.6% and 4% respectively when compared with the conventional wing. Simulations also showed that there is a significant improvement on pressure distribution over the lower surface of the morphing wing aerofoil. The increase in flow smoothness and reduction in vortex size reduced pressure drag along the trailing edge of the wing as a result an increase in pressure on the lower surface was experienced. A morphing wing reduced the size of the vortices and therefore the noise levels measured were reduced by up to 50%.

  11. Temporal variation of wing geometry in Aedes albopictus

    Directory of Open Access Journals (Sweden)

    Paloma Oliveira Vidal

    2012-12-01

    Full Text Available Although native to the tropical and subtropical areas of Southeast Asia, Aedes albopictus is now found on five continents, primarily due to its great capacity to adapt to different environments. This species is considered a secondary vector of dengue virus in several countries. Wing geometric morphometrics is widely used to furnish morphological markers for the characterisation and identification of species of medical importance and for the assessment of population dynamics. In this work, we investigated the metric differentiation of the wings of Ae. albopictus samples collected over a four-year period (2007-2010 in São Paulo, Brazil. Wing size significantly decreased during this period for both sexes and the wing shape also changed over time, with the wing shapes of males showing greater differences after 2008 and those of females differing more after 2009. Given that the wings play sex-specific roles, these findings suggest that the males and females could be affected by differential evolutionary pressures. Consistent with this hypothesis, a sexually dimorphic pattern was detected and quantified: the females were larger than the males (with respect to the mean and had a distinct wing shape, regardless of allometric effects. In conclusion, wing alterations, particularly those involving shape, are a sensitive indicator of microevolutionary processes in this species.

  12. Temporal variation of wing geometry in Aedes albopictus.

    Science.gov (United States)

    Vidal, Paloma Oliveira; Carvalho, Eneas; Suesdek, Lincoln

    2012-12-01

    Although native to the tropical and subtropical areas of Southeast Asia, Aedes albopictus is now found on five continents, primarily due to its great capacity to adapt to different environments. This species is considered a secondary vector of dengue virus in several countries. Wing geometric morphometrics is widely used to furnish morphological markers for the characterisation and identification of species of medical importance and for the assessment of population dynamics. In this work, we investigated the metric differentiation of the wings of Ae. albopictus samples collected over a four-year period (2007-2010) in São Paulo, Brazil. Wing size significantly decreased during this period for both sexes and the wing shape also changed over time, with the wing shapes of males showing greater differences after 2008 and those of females differing more after 2009. Given that the wings play sex-specific roles, these findings suggest that the males and females could be affected by differential evolutionary pressures. Consistent with this hypothesis, a sexually dimorphic pattern was detected and quantified: the females were larger than the males (with respect to the mean) and had a distinct wing shape, regardless of allometric effects. In conclusion, wing alterations, particularly those involving shape, are a sensitive indicator of microevolutionary processes in this species.

  13. Stable structural color patterns displayed on transparent insect wings.

    Science.gov (United States)

    Shevtsova, Ekaterina; Hansson, Christer; Janzen, Daniel H; Kjærandsen, Jostein

    2011-01-11

    Color patterns play central roles in the behavior of insects, and are important traits for taxonomic studies. Here we report striking and stable structural color patterns--wing interference patterns (WIPs)--in the transparent wings of small Hymenoptera and Diptera, patterns that have been largely overlooked by biologists. These extremely thin wings reflect vivid color patterns caused by thin film interference. The visibility of these patterns is affected by the way the insects display their wings against various backgrounds with different light properties. The specific color sequence displayed lacks pure red and matches the color vision of most insects, strongly suggesting that the biological significance of WIPs lies in visual signaling. Taxon-specific color patterns are formed by uneven membrane thickness, pigmentation, venation, and hair placement. The optically refracted pattern is also stabilized by microstructures of the wing such as membrane corrugations and spherical cell structures that reinforce the pattern and make it essentially noniridescent over a large range of light incidences. WIPs can be applied to map the micromorphology of wings through direct observation and are useful in several fields of biology. We demonstrate their usefulness as identification patterns to solve cases of cryptic species complexes in tiny parasitic wasps, and indicate their potentials for research on the genetic control of wing development through direct links between the transregulatory wing landscape and interference patterns we observe in Drosophila model species. Some species display sexually dimorphic WIPs, suggesting sexual selection as one of the driving forces for their evolution.

  14. Hydraulic Evaluation of the Crest Wing Wave Energy Converter

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Antonishen, Michael Patrick

    This report presents the results of an experimental study of the wave energy converting abilities of the Crest Wing wave energy converter (WEC). The Crest Wing is a WEC that uses its movement in matching the shape of an oncoming wave to generate power. Model tests have been performed using a scal...

  15. Unsteady Aerodynamics of Flapping Wing of a Bird

    Directory of Open Access Journals (Sweden)

    M. Agoes Moelyadi

    2013-04-01

    Full Text Available The unsteady flow behavior and time-dependent aerodynamic characteristics of the flapping motion of a bird’s wing were investigated using a computational method. During flapping, aerodynamic interactions between bird wing surfaces and surrounding flow may occur, generating local time-dependent flow changes in the flow field and aerodynamic load of birds. To study the effect of flapping speed on unsteady aerodynamic load, two kinds of computational simulations were carried out, namely a quasi-steady and an unsteady simulation. To mimic the movement of the down-stroke and the upstroke of a bird, the flapping path accorded to a sinus function, with the wing attitude changing in dihedral angle and time. The computations of time-dependent viscous flow were based on the solution of the Reynolds Averaged Navier-Stokes equations by applying the k-e turbulence model. In addition, the discretization for the computational domain around the model used multi-block structured grid to provide more accuracy in capturing viscous flow, especially in the vicinity of the wing and body surfaces, to obtain a proper wing-body geometry model. For this research, the seagull bird was chosen, which has high aspect ratio wings with pointed wing-tips and a high camber wing section. The results include mesh movement, velocity contours as well as aerodynamic coefficients of the flapping motion of the bird at various flapping frequencies.

  16. Vortex coupling in trailing vortex-wing interactions

    Science.gov (United States)

    Chen, C.; Wang, Z.; Gursul, I.

    2018-03-01

    The interaction of trailing vortices of an upstream wing with rigid and flexible downstream wings has been investigated experimentally in a wind tunnel, using particle image velocimetry, hot-wire, force, and deformation measurements. Counter-rotating upstream vortices exhibit increased meandering when they are close to the tip of the downstream wing. The upstream vortex forms a pair with the vortex shed from the downstream wing and then exhibits large displacements around the wing tip. This coupled motion of the pair has been found to cause large lift fluctuations on the downstream wing. The meandering of the vortex pair occurs at the natural meandering frequency of the isolated vortex, with a low Strouhal number, and is not affected by the frequency of the large-amplitude wing oscillations if the downstream wing is flexible. The displacement of the leading vortex is larger than that of the trailing vortex; however, it causes highly correlated variations of the core radius, core vorticity, and circulation of the trailing vortex with the coupled meandering motion. In contrast, co-rotating vortices do not exhibit any increased meandering.

  17. Closed-type wing for drones: positive and negative characteristics

    Directory of Open Access Journals (Sweden)

    Leonid I. Gretchihin

    2014-02-01

    Full Text Available The paper presents the aerodynamics of a wing of a closed oval ellipsoidal shape, designed with the use of the molecular-kinetic theory. The positive and negative characteristics of aircraft - drones with an oval wing are described. The theoretical calculations have been experimentally checked.

  18. DETERMINATION OF COMMERCIAL AIRCRAFT WING GEOMETRY DURING THE FLIGHT

    Directory of Open Access Journals (Sweden)

    V. I. Shevyakov

    2015-01-01

    Full Text Available The article deals with the task of determination of wing shape for sub-sonic commercial aircraft by photogrammetric method. It provides the procedure for measurements taken on ground and in flight. It also provides the outcome of wing twist for commercial aircraft at cruise.

  19. Global Local Structural Optimization of Transportation Aircraft Wings

    NARCIS (Netherlands)

    Ciampa, P.D.; Nagel, B.; Van Tooren, M.J.L.

    2010-01-01

    The study presents a multilevel optimization methodology for the preliminary structural design of transportation aircraft wings. A global level is defined by taking into account the primary wing structural components (i.e., ribs, spars and skin) which are explicitly modeled by shell layered finite

  20. Wing flexibility effects in clap-and-fling

    NARCIS (Netherlands)

    Percin, M.; Hu, Y.; Van Oudheusden, B.W.; Remes, B.; Scarano, F.

    2011-01-01

    The work explores the use of time-resolved tomographic PIV measurements to study a flapping-wing model, the related vortex generation mechanisms and the effect of wing flexibility on the clap-and-fling movement in particular. An experimental setup is designed and realized in a water tank by use of a