77 FR 68798 - Connecticut; Emergency and Related Determinations

Science.gov (United States)

2012-11-16

... determined that the emergency conditions in the State of Connecticut resulting from Hurricane Sandy beginning... State of Connecticut have been designated as adversely affected by this declared emergency: All counties... Assistance (DUA); 97.046, Fire Management Assistance Grant; 97.048, Disaster Housing Assistance to...

76 FR 61373 - Connecticut; Emergency and Related Determinations

Science.gov (United States)

2011-10-04

... determined that the emergency conditions in the State of Connecticut resulting from Hurricane Irene beginning... designated as adversely affected by this declared emergency: All eight counties in the State of Connecticut... Management Assistance Grant; 97.048, Disaster Housing Assistance to Individuals and Households In...

Babesia microti, human babesiosis, and Borrelia burgdorferi in Connecticut.

OpenAIRE

Anderson, J F; Mintz, E D; Gadbaw, J J; Magnarelli, L A

1991-01-01

Babesia microti was isolated from a white-footed mouse (Peromyscus leucopus) that was captured in southeastern Connecticut in 1988, when the first human case of babesiosis acquired in Connecticut was recognized. To date, 13 cases of babesiosis have been reported in Connecticut, the largest number of human cases reported on the mainland United States. Two of nine patients quiried remembered a prior tick bite. Since Babesia parasites are known to be vectored only by ticks, we surmise that 12 of...

77 FR 6465 - Drawbridge Operation Regulations; Connecticut River, Old Lyme, CT

Science.gov (United States)

2012-02-08

... Operation Regulations; Connecticut River, Old Lyme, CT AGENCY: Coast Guard, DHS. ACTION: Notice of temporary... deviation from the regulation governing the operation of the Old Saybrook-Old Lyme RR Bridge, mile 3.4, across the Connecticut River at Old Lyme, Connecticut. The deviation is necessary to facilitate bridge...

The Connecticut Experience.

Science.gov (United States)

Aleman, Nancy M.; Landers, Patricia A.; Parkman, Gary W.

2002-01-01

This article shows how in Connecticut, making a solid connection with the state Department of Education has helped lead to well-developed, state-supported school counseling documents. Discusses how the latest efforts have resulted in two publications based on the National Standards for School Counseling Programs. (GCP)

Association Between Connecticut's Permit-to-Purchase Handgun Law and Homicides.

Science.gov (United States)

Rudolph, Kara E; Stuart, Elizabeth A; Vernick, Jon S; Webster, Daniel W

2015-08-01

We sought to estimate the effect of Connecticut's implementation of a handgun permit-to-purchase law in October 1995 on subsequent homicides. Using the synthetic control method, we compared Connecticut's homicide rates after the law's implementation to rates we would have expected had the law not been implemented. To estimate the counterfactual, we used longitudinal data from a weighted combination of comparison states identified based on the ability of their prelaw homicide trends and covariates to predict prelaw homicide trends in Connecticut. We estimated that the law was associated with a 40% reduction in Connecticut's firearm homicide rates during the first 10 years that the law was in place. By contrast, there was no evidence for a reduction in nonfirearm homicides. Consistent with prior research, this study demonstrated that Connecticut's handgun permit-to-purchase law was associated with a subsequent reduction in homicide rates. As would be expected if the law drove the reduction, the policy's effects were only evident for homicides committed with firearms.

76 FR 62396 - Martha Coakley, Attorney General of the Commonwealth of Massachusetts, Connecticut Public...

Science.gov (United States)

2011-10-07

..., Attorney General of the Commonwealth of Massachusetts, Connecticut Public Utilities Regulatory Authority... Martha Coakley, Attorney General of the Commonwealth of Massachusetts, Connecticut Public Utilities..., George Jepsen, Attorney General of the State of Connecticut, Connecticut Office of Consumer Counsel...

Alumnos españoles en el internado jesuita de Beaumont (Old Windsor, Inglaterra, 1880-1886

Directory of Open Access Journals (Sweden)

Rodríguez Caparrini, Bernardo

2014-06-01

Full Text Available The present article is a continuation of three previous studies, in which taken together we analyzed the presence of Spanish students at Beaumont College (Old Windsor, Berkshire, England from the foundation of this Jesuit boarding school in October 1861 until August 1880. The period now under consideration spans from September 1880 to August 1886. The Spanish students, or those of Spanish descent, who passed through the college classrooms over a period of six academic years, are presented chronologically, their geographical origin is given and all of them are identified.El presente artículo es continuación de otros tres estudios, en los que en conjunto analizábamos la presencia de alumnos españoles en Beaumont College (Old Windsor, Berkshire, Inglaterra desde la fundación de este internado jesuita en octubre de 1861 hasta el mes de agosto de 1880. El periodo que ahora estudiamos comprende desde septiembre de 1880 hasta agosto de 1886. Hacemos una relación cronológica de los estudiantes españoles o de ascendencia española que pasan por las aulas del colegio a lo largo de estos seis cursos académicos, aportamos su procedencia geográfica e identificamos a todos ellos.

Survey of Connecticut Nurse-Midwives.

Science.gov (United States)

Holland, Margaret L; Holland, Eliza S

2007-01-01

Descriptive data on nurse-midwifery income, workload, job definitions, employment benefits, and clinical practices are limited. Information about nurse-midwifery practice today is important for the growth of the profession and for future policy initiatives. A survey of nurse-midwives in Connecticut was conducted in 2005. This article reports state-specific data about income, workload, job definitions, employment benefits, and clinical issues, such as vaginal birth after cesarean. Full-time midwives in Connecticut worked an average of 77 hours per week, had a mean salary of 79,554 dollars, and 87% had on-call responsibilities. A "typical" Connecticut midwife had an "average" full-time work week consisting of two 24-hour call days and three 7-hour office days, seeing 19 to 24 patients per office day. Most held Master of Science in Nursing degrees, worked in physician-owned practices, and attended births in hospitals or medical centers. Health insurance, paid sick time, and retirement plans were offered to most respondents. Almost all respondents provide gynecologic, antepartum, and postpartum care, but few offer newborn care. There is significant variation in restrictions on midwives offering vaginal birth after cesarean and on length of scheduled appointments. Data on expanded practices, such as first-assisting caesarean sections and endometrial biopsies, are reported for the first time.

Geological-Seismological Evaluation of Earthquake Hazards at West Thompson Damsite, Connecticut.

Science.gov (United States)

1984-06-01

Connecticut, N of 41.61N 72.12W 1.5 - Norwich ( Foreshock ) 29 Jun 80 Connecticut, N of 41.46N 72.09W 1.8 - Norwich 28 Jul 80 Connecticut, N of 41.52N...the event was judged to be either an aftershock or foreshock ; the geographic location is given as north latitude and west longitude, to the nearest 0.10

Estimation of uranium and cobalt-60 distribution coefficients and uranium-235 enrichment at the Combustion Engineering Company site in Windsor, Connecticut

International Nuclear Information System (INIS)

Wang, Y.; Orlandini, K.A.; Yu, C.

1996-05-01

Site-specific distribution coefficients for uranium isotopes and cobalt-60 (Co-60) and the fraction of uranium-235 (U-235) enrichment by mass were estimated for environmental samples collected from the Combustion Engineering Company site in Windsor, CT. This site has been identified for remedial action under the US Department of Energy's (DOE) Formerly Utilized Sites Remedial Action Program. The authority of DOE at the Combustion Engineering site is limited to (1) Building 3; (2) other activities or areas associated exclusively with Building 3 (such as sewer lines); or (3) contamination that is exclusively highly enriched uranium. In this study, 16 samples were collected from the Combustion Engineering site, including 8 soil, 4 sediment, 3 water, and 1 water plus sludge sample. These samples were analyzed for isotopic uranium by alpha spectrometry and for Co-60 by gamma spectrometry. The site-specific distribution coefficient for each isotope was estimated as the ratio of extractable radionuclide activity in the solid phase to the activity in the contact solution following a 19-day equilibration. The uranium activity measurements indicate that uranium-234 (U-234) and uranium-238 (U-238) were in secular equilibrium in two soil samples and that soil and sediment samples collected from other sampling locations had higher U-234 activity than U-238 activity in both the solid and solution phases. The site-specific distribution coefficient (Kd) ranged from 82 to 44,600 mL/g for U-238 and from 102 to 65,900 mL/g for U-234. Calculation of U-235 enrichment by mass indicated that four soil samples had values greater than 0.20; these values were 0.37, 0.38, 0.46, and 0.68. Cobalt-60 activity was detected in only three sediment samples. The measured Co-60 activity in the solid phase ranged from 0.15 to 0.45 pCi/g and that in the water phase of all three samples combined was 4 pCi/L. The Kd value for Co-60 in the site brook sediment was calculated to be 70 mL/g

Connecticut State Briefing Book for low-level radioactive-waste management

International Nuclear Information System (INIS)

1981-06-01

The Connecticut State Briefing Book is one of a series of state briefing books on low-level radioactive waste management practices. It has been prepared to assist state and federal agency officials in planning for safe low-level radioactive waste disposal. The report contains a profile of low-level radioactive waste generators in Connecticut. The profile is the result of a survey of Nuclear Regulatory Commission licensees in Connecticut. The briefing book also contains a comprehensive assessment of low-level radioactive waste management issues and concerns as defined by all major interested parties including industry, government, the media, and interest groups. The assessment was developed through personal communications with representatives of interested parties, and through a review of media sources. Lastly, the briefing book provides demographic and socioeconomic data and a discussion of relevant government agencies and activities, all of which may affect waste management practices in Connecticut

Connecticut – Sexual Orientation and Gender Identity Law and Documentation of Discrimination

OpenAIRE

Sears, Brad

2009-01-01

A Connecticut statute bans employment discrimination on the basis of sexual orientation. No Connecticut statutes prohibit discrimination on the basis of gender identity or expression. In November 2000, the Connecticut Commission on Human Rights and Opportunities – the agency responsible for administering the anti-discrimination statutes and for processing discrimination complaints – ruled that statutes prohibiting sex discrimination also banned discrimination on the basis of gender identity. ...

Residential Energy Efficiency Potential: Connecticut

Energy Technology Data Exchange (ETDEWEB)

Wilson, Eric J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-11-16

Energy used by Connecticut single-family homes that can be saved through cost-effective improvements. Prepared by Eric Wilson and Noel Merket, NREL, and Erin Boyd, U.S. Department of Energy Office of Energy Policy and Systems Analysis.

The State of Connecticut: The Report of the Governor's Commission on Tax Reform. Summary.

Science.gov (United States)

Governor's Commission on Tax Reform, Hartford, CT.

The Commission evaluated a wide variety of alternative tax sources and examined the existing structure in Connecticut. It specifically evaluated inequities resulting from Connecticut taxes as they affect various classes of citizens and examined the impact of the Connecticut tax structure on business with a view to encouraging economic expansion.…

Connecticut's forest resources, 2010

Science.gov (United States)

Brett J. Butler; Cassandra Kurtz; Christopher Martin; W. Keith Moser

2011-01-01

This publication provides an overview of forest resource attributes for Connecticut based on an annual inventory conducted by the Forest Inventory and Analysis (FIA) program at the Northern Research Station of the U.S. Forest Service. These estimates, along with web-posted core tables, will be updated annually. For more information please refer to page 4 of this report...

Connecticut's forest resources, 2009

Science.gov (United States)

Brett J. Butler; Christopher Martin

2011-01-01

This publication provides an overview of forest resource attributes for Connecticut based on an annual inventory conducted by the Forest Inventory and Analysis (FIA) program at the Northern Research Station of the U.S. Forest Service. These estimates, along with web-posted core tables, will be updated annually. For more information please refer to page 4 of this report...

Forests of Connecticut, 2015

Science.gov (United States)

Brett J. Butler

2016-01-01

This report provides an overview of forest resources in Connecticut based on an inventory conducted by the U.S. Forest Service, Forest Inventory and Analysis (FIA) program of the Northern Research Station. Estimates are based on field data collected using the FIA annualized sample design. Results are for the measurement years 2010-2015 with comparisons made to 2005-...

33 CFR 100.102 - Great Connecticut River Raft Race, Middletown, CT.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Great Connecticut River Raft Race, Middletown, CT. 100.102 Section 100.102 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... Raft Race, Middletown, CT. (a) Regulated Area. That section of the Connecticut River between Dart...

Applying transportation asset management in Connecticut.

Science.gov (United States)

2008-12-01

The study consists primarily of a detailed review of those states that utilize transportation asset management (TAM) systems that may be applicable for Connecticuts consideration, and includes as well the identification of a comprehensive pavement...

Evidence of natural reproduction of Atlantic sturgeon in the Connecticut River from unlikely sources.

Directory of Open Access Journals (Sweden)

Tom Savoy

Full Text Available Atlantic Sturgeon is listed under the U.S. Endangered Species Act as five Distinct Population Segments (DPS. The "endangered" New York Bight (NYB DPS is thought to only harbor two populations; one in the Hudson River and a second smaller one in the Delaware River. Historically, the Connecticut River probably supported a spawning population of Atlantic Sturgeon that was believed extirpated many decades ago. In 2014, we successfully collected pre-migratory juvenile specimens from the lower Connecticut River which were subjected to mitochondrial DNA (mtDNA control region sequence and microsatellite analyses to determine their genetic relatedness to other populations coastwide. Haplotype and allelic frequencies differed significantly between the Connecticut River collection and all other populations coastwide. Sibship analyses of the microsatellite data indicated that the Connecticut River collection was comprised of a small number of families that were likely the offspring of a limited number of breeders. This was supported by analysis of effective population size (Ne and number of breeders (Nb. STRUCTURE analysis suggested that there were 11 genetic clusters among the coastwide collections and that from the Connecticut River was distinct from those in all other rivers. This was supported by UPGMA analyses of the microsatellite data. In AMOVA analyses, among region variation was maximized, and among population within regions variation minimized when the Connecticut River collection was separate from the other two populations in the NYB DPS indicating the dissimilarity between the Connecticut River collection and the other two populations in the NYB DPS. Use of mixed stock analysis indicated that the Connecticut River juvenile collection was comprised of specimens primarily of South Atlantic and Chesapeake Bay DPS origins. The most parsimonious explanation for these results is that the Connecticut River hosted successful natural reproduction in 2013

Interactive Distance Learning in Connecticut.

Science.gov (United States)

Pietras, Jesse John; Murphy, Robert J.

This paper provides an overview of distance learning activities in Connecticut and addresses the feasibility of such activities. Distance education programs have evolved from the one dimensional electronic mail systems to the use of sophisticated digital fiber networks. The Middlesex Distance Learning Consortium has developed a long-range plan to…

Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Connecticut

Energy Technology Data Exchange (ETDEWEB)

Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-02-15

The 2015 IECC provides cost-effective savings for residential buildings in Connecticut. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Connecticut.

50 CFR 32.26 - Connecticut.

Science.gov (United States)

2010-10-01

... refuge each day (see §§ 27.93 and 27.94 of this chapter). B. Upland Game Hunting. [Reserved] C. Big Game... NATIONAL WILDLIFE REFUGE SYSTEM HUNTING AND FISHING Refuge-Specific Regulations for Hunting and Fishing § 32.26 Connecticut. The following refuge units have been opened for hunting and/or fishing and are...

76 FR 26933 - Approval and Promulgation of Implementation Plans; Connecticut: Prevention of Significant...

Science.gov (United States)

2011-05-10

... Promulgation of Implementation Plans; Connecticut: Prevention of Significant Deterioration; Greenhouse Gas... Significant Deterioration (PSD) program. First, the revision provides Connecticut with authority to issue PSD... Regional Office, Office of Ecosystem Protection, Air Permits, Toxics, and Indoor Air Programs Unit, 5 Post...

Babesia microti, human babesiosis, and Borrelia burgdorferi in Connecticut.

Science.gov (United States)

Anderson, J F; Mintz, E D; Gadbaw, J J; Magnarelli, L A

1991-12-01

Babesia microti was isolated from a white-footed mouse (Peromyscus leucopus) that was captured in southeastern Connecticut in 1988, when the first human case of babesiosis acquired in Connecticut was recognized. To date, 13 cases of babesiosis have been reported in Connecticut, the largest number of human cases reported on the mainland United States. Two of nine patients quiried remembered a prior tick bite. Since Babesia parasites are known to be vectored only by ticks, we surmise that 12 of these infections were acquired via tick bites; 1 was obtained by blood transfusion (the patient was 46 years of age) from an endemically infected donor. The ages of the patients with tick-acquired babesiosis ranged from 61 to 95 years. Two patients died with active infections, and one patient died from chronic obstructive pulmonary disease soon after treatment with clindamycin and quinine. Indirect fluorescent-antibody titers of blood samples drawn at the time of hospitalization for 11 patients and at the time of active infection for 1 asymptomatic person ranged from 1:1,024 to 1:4,096. Five of eight patients with babesiosis also had significant immunoglobulin G or immunoglobulin M titers (1:640 to 1:5,120) to Borrelia burgdorferi. B. microti was isolated in Syrian hamsters inoculated with blood from 7 of 12 patients tested and was also isolated from mice captured in six towns. The peridomestic nature of the disease was demonstrated by isolating the parasite from white-footed mice captured in or near the yards of eight different patients. Of 59 mice tested, 27 were positive and 25 were coinfected with B. burgdorferi. The isolation of B. microti from a white-footed mouse captured in north-central Connecticut (West Hartford), away from the focus of human infections in southeastern Connecticut, suggests that this pathogen may spread into other areas where Ixodes dammini, the tick vector, becomes established.

Dynamics of Connecticut hemlock stands

Science.gov (United States)

Jeffrey S. Ward; David M. Smith

2000-01-01

The stand dynamics and production of two one-acre plots of eastern hemlock (Tsuga canadensis L) in Connecticut have been followed for more than six decades. Data were recorded for all individual trees. One plot (Saltonstall) was established in 1924 after the removal of a hardwood overstory. This stand had a nearly pure, almost fully closed understory...

Connecticut State University System Initiative for Nanotechnology-Related Equipment, Faculty Development and Curriculum Development

Energy Technology Data Exchange (ETDEWEB)

Broadbridge, Christine C. [Southern Connecticut State University

2013-03-28

DOE grant used for partial fulfillment of necessary laboratory equipment for course enrichment and new graduate programs in nanotechnology at the four institutions of the Connecticut State University System (CSUS). Equipment in this initial phase included variable pressure scanning electron microscope with energy dispersive x-ray spectroscopy elemental analysis capability [at Southern Connecticut State University]; power x-ray diffractometer [at Central Connecticut State University]; a spectrophotometer and spectrofluorimeter [at Eastern Connecticut State University; and a Raman Spectrometer [at Western Connecticut State University]. DOE's funding was allocated for purchase and installation of this scientific equipment and instrumentation. Subsequently, DOE funding was allocated to fund the curriculum, faculty development and travel necessary to continue development and implementation of the System's Graduate Certificate in Nanotechnology (GCNT) program and the ConnSCU Nanotechnology Center (ConnSCU-NC) at Southern Connecticut State University. All of the established outcomes have been successfully achieved. The courses and structure of the GCNT program have been determined and the program will be completely implemented in the fall of 2013. The instrumentation has been purchased, installed and has been utilized at each campus for the implementation of the nanotechnology courses, CSUS GCNT and the ConnSCU-NC. Additional outcomes for this grant include curriculum development for non-majors as well as faculty and student research.

Connecticut ITS/CVO business plan : final report

Science.gov (United States)

1998-06-01

This document describes: goals and objectives for Connecticut ITS/CVO deployment; current regulatory structure and activities; envisioned process changes enabled by ITS/CVO technologies; how motor carriers perceive the value of ITS/CVO services; bene...

Water resources inventory of Connecticut Part 10: Lower Connecticut River basin

Science.gov (United States)

Weiss, Lawrence A.; Bingham, James W.; Thomas, Mendall P.

1982-01-01

The lower Connecticut River basin study area in south-central Connecticut includes 639 square miles and is drained principally by the Connecticut River and by seven smaller streams that flow directly to Long Island Sound between the West River on the west and the Connecticut River on the east. The population in 1979 was estimated to be 210,380. Much of the industrial development and population centers are in the Mattabesset River basin in the northwestern part, and the largest water use is also in the Mattabesset River basin. Precipitation averages 47 inches per year and provides an abundant supply of water. About 20 inches returns to the atmosphere as evapotranspiration, and the remainder either flows directly to streams or percolates to the water table, eventually discharging to Long Island Sound. Small quantities of water are exported from the basin by the New Haven and Meridan Water Departments, and small quantities are imported by the New Britain Water Department and Metropolitan Direct Commission. Precipitation during 1931-60 resulted in an average annual runoff of 302 billion gallons. In inflow from the Connecticut River is added to the average annual runoff, the 4,370 billion gallon s per year is potentially available for water ue. The domestic, institutional, commercial, and industrial (other than cooling water) water use for 1970 was 7 billion gallons, which is only 3 percent of the total water used, whereas 97 percent of the total is cooling water for power plants. Approximately 60 percent of the 7 billion gallons is treated before being discharged back to the streams. The total amount of fresh water used during 1970 was estimated to be 256,000 million gallons (Mgal), of which 247,000 Mgal was used for cooling water at stream electric-generating plants. The quantity for domestic, commercial, industrial, and agricultural used was 9,000 Mgal, which was approximately 120 gallons a day per person. Public water systems providing 70 percent of these

2015 USACE NAE Topobathy Lidar DEM: Connecticut

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — These data were collected for the USACE New England District (NAE). The data set is made up of 13 small projects in Connecticut. These projects are: Bridgeport,...

Early Medicaid Expansion In Connecticut Stemmed The Growth In Hospital Uncompensated Care.

Science.gov (United States)

Nikpay, Sayeh; Buchmueller, Thomas; Levy, Helen

2015-07-01

As states continue to debate whether or not to expand Medicaid under the Affordable Care Act (ACA), a key consideration is the impact of expansion on the financial position of hospitals, including their burden of uncompensated care. Conclusive evidence from coverage expansions that occurred in 2014 is several years away. In the meantime, we analyzed the experience of hospitals in Connecticut, which expanded Medicaid coverage to a large number of childless adults in April 2010 under the ACA. Using hospital-level panel data from Medicare cost reports, we performed difference-in-differences analyses to compare the change in Medicaid volume and uncompensated care in the period 2007-13 in Connecticut to changes in other Northeastern states. We found that early Medicaid expansion in Connecticut was associated with an increase in Medicaid discharges of 7-9 percentage points, relative to a baseline rate of 11 percent, and an increase of 7-8 percentage points in Medicaid revenue as a share of total revenue, relative to a baseline share of 10 percent. Also, in contrast to the national and regional trends of increasing uncompensated care during this period, hospitals in Connecticut experienced no increase in uncompensated care. We conclude that uncompensated care in Connecticut was roughly one-third lower than what it would have been without early Medicaid expansion. The results suggest that ACA Medicaid expansions could reduce hospitals' uncompensated care burden. Project HOPE—The People-to-People Health Foundation, Inc.

Water resources of the Hartford-New Britain area, Connecticut

Science.gov (United States)

Cushman, Robert Vittum; Tanski, D.; Thomas, M.P.

1964-01-01

The Hartford-New Britain area includes the metropolitan areas of Hartford and New Britain and parts of several adjoining towns. Water used in the area is withdrawn from the principal streams and aquifers at an average rate of 463.5 mgd (million gallons per day). Sufficient water is available from these sources to meet present requirements and those for many years to come, although local shortages may develop in some areas as the result of problems of distribution and treatment. About 98 percent of all water used in 1957 was from surface sources. More than 425 mgd was required by industry, and about 23 mgd was for domestic water supply. The Farmington River upstream from Collinsville is the chief source of water for public supply in the Hartford-New Britain area, whereas the Connecticut River is the chief source of water for industry. An average of about 40 mgd is withdrawn from the upper Farmington River for public supply, and about 404 mgd is withdrawn by industry from the Connecticut River for nonconsumptive use and returned directly to the stream. The Connecticut River is the source of the largest quantity of water in the area. The flow of the stream at Thompsonville may be expected to equal or exceed about 2,000 mgd 95 percent of the time, and the flow should not be less than this amount for periods longer than 12 days. The flow below Thompsonville is increased by additions from the Scantic, Farmington, Park, and Hockanum Rivers and from numerous smaller tributary streams. The available streamflow data for the aforementioned rivers have been summarized graphically in the report. The chemical quality of water in the Connecticut River is good, except for short periods when the iron concentration is high. In addition to the removal of iron some other treatment may be necessary if water from the Connecticut River is used for special purposes. The chemical quality of the tributary streams is good, except the quality of the Park River, which is poor. Thus the

78 FR 38587 - Approval and Promulgation of Air Quality Implementation Plans; Connecticut; Reasonably Available...

Science.gov (United States)

2013-06-27

... reasonably available control technology (RACT) for oxides of nitrogen (NO X ) and volatile organic compounds.... I. Background and Purpose II. Connecticut's Reasonably Available Control Technology Certification... controlling volatile organic compound emissions that Connecticut submitted to EPA on July 20, 2007. \\1\\ The...

Can Interdistrict Choice Boost Student Achievement? The Case of Connecticut's Interdistrict Magnet School Program

Science.gov (United States)

Bifulco, Robert; Cobb, Casey D.; Bell, Courtney

2009-01-01

Connecticut's interdistrict magnet schools offer a model of choice-based desegregation that appears to satisfy current legal constraints. This study presents evidence that interdistrict magnet schools have provided students from Connecticut's central cities access to less racially and economically isolated educational environments and estimates…

Evaluation of Connecticut's Interdistrict Magnet Schools

Science.gov (United States)

Cobb, Casey D.; Bifulco, Robert; Bell, Courtney

2009-01-01

As of October 2007, 54 interdistrict magnet schools enrolling 18,928 students were operating in Connecticut. The bulk of these schools are located in the Hartford and New Haven areas--21 in the Hartford area and 17 in the New Haven area. Interdistrict magnets also serve significant numbers of students in the Waterbury region. In keeping with the…

76 FR 16358 - Approval and Promulgation of Air Quality Implementation Plans; Connecticut, Maine, New Hampshire...

Science.gov (United States)

2011-03-23

... enforceable emission limits on ozone precursors; any judgment about whether those emission limits discharge... attainment demonstration modeling efforts conducted by the Ozone Transport Commission. Connecticut, Maine... Implementation Plans; Connecticut, Maine, New Hampshire and Rhode Island; Infrastructure SIPs for the 1997 Ozone...

Trace elements and radionuclides in the Connecticut River and Amazon River estuary

International Nuclear Information System (INIS)

Dion, E.P.

1983-01-01

The Connecticut River, its estuary, and the Amazon River estuary were studied to elucidate some of the processes which control river water chemistry and the flux of elements to the sea. The approach taken was to identify inputs to the Connecticut River and to investigate geochemical processes which modify the dissolved load. The form and quantity of nuclides which are in turn supplied to the estuary are altered by processes unique to that transition zone to the ocean. The Connecticut River estuary was sampled on a seasonal basis to investigate the role of the estuary in controlling the flux of elements to the sea. The knowledge gained from the Connecticut River study was applied to the quantitatively more significant Amazon River estuary. There a variety of samples were analyzed to understand the processes controlling the single greatest flux of elements to the Atlantic Ocean. The results indicate that estimates of the total flux of nuclides to the oceans can best be calculated based on groundwater inputs. Unless significant repositories for nuclides exist in the river-estuarine system, the groundwater flux of dissolved nuclides is that which will eventually be delivered to the ocean despite the reactions which were shown to occur in both rivers and estuaries. 153 references, 63 figures, 28 tables

Safe Shores and Resilient Transit Corridors: Using Science, Design, and Stakeholder Partnerships to Address Connecticut's Coastal Vulnerabilities

Science.gov (United States)

French, R. A.; Felson, A. J.; Kirmmse, E.; Hagemann, K.

2015-12-01

Connecticut's densely developed coastline is highly vulnerable to sea level rise and coastal storms. 95% of the state's entire population lives within 50 miles of the shore. Connecticut has more than $542 billion in insured assets in harms way, only Florida has a greater exposure. As part of the state of Connecticut Phase 1 application for the HUD National Disaster Resilience Competition, the Connecticut Institute for Resilience and Climate Adaptation (CIRCA) at the University of Connecticut undertook an assessment of coastal vulnerabilities, including the impacts of sea level rise on the frequency of flooding, socioeconomic factors, critical infrastructure, and housing using data collected from federal, state, and municipal sources. Connecticut's unique geology, characterized by a glaciated coastline with highly erodible former deltas and elevated ridgelines extending out to rocky headlands, became the basis of the climate adaptation approach. Together with a nine state agency workgroup, municipal and regional government, and non-profit and industry representatives, CIRCA and the Yale UED lab developed a long-term urban redevelopment solution of resilient access and egress corridors layered over ridgelines and resilient zones of transit oriented economic development linked to shoreline communities. This concept can be applied in both Connecticut's coastal cities like New Haven and its smaller towns. The process demonstrated the effective partnership between the universities and state agencies in bringing the science of flood modeling and mapping together with innovative design to create solutions for climate adaptation. However, it also revealed significant gaps in data availability to analyze the economic and social drivers for adopting different adaptation strategies. Furthermore, the accuracy of current flood mapping tools needs to be improved to predict future flooding at the municipal project scale. As Connecticut and other states move forward with resilience

77 FR 68800 - Connecticut; Major Disaster and Related Determinations

Science.gov (United States)

2012-11-16

... Connecticut have been designated as adversely affected by this major disaster: Fairfield, Middlesex, New Haven... within New London County for Individual Assistance. Fairfield, Middlesex, New Haven, and New London...

76 FR 37809 - The Connecticut Transmission Municipal Electric Energy Cooperative; Notice of Request for Waiver...

Science.gov (United States)

2011-06-28

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. TS11-4-000] The Connecticut Transmission Municipal Electric Energy Cooperative; Notice of Request for Waiver or Exemption Take notice that on June 8, 2011, the Connecticut Transmission Municipal Electric Energy Cooperative filed a petition...

27 CFR 9.122 - Western Connecticut Highlands.

Science.gov (United States)

2010-04-01

... Highlands. 9.122 Section 9.122 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... (Litchfield-Hartford-New Haven County line); (6) The boundary then travels approximately 7 miles west along the Litchfield-New Haven County line to Connecticut Route #8 at Waterville in the Town of Waterbury...

Developing a low-level radioactive waste disposal facility in Connecticut: Update on progress and new directions

Energy Technology Data Exchange (ETDEWEB)

Gingerich, R.E. [Connecticut Hazardous Waste Management Service, Hartford, CT (United States)

1993-03-01

Connecticut is a member of the Northeast Interstate Low-Level Radioactive Waste Management Compact (Northeast LLRW Compact). The other member of the Northeast LLRW Compact is New Jersey. The Northeast Interstate Low-Level Radioactive Waste Commission (Northeast Compact Commission), the Northeast LLRW Compact`s governing body, has designated both Connecticut and New Jersey as host states for disposal facilities. The Northeast Compact Commission has recommended that, for purposes of planning for each state`s facility, the siting agency for the state should use projected volumes and characteristics of the LLW generated in its own state. In 1987 Connecticut enacted legislation that assigns major responsibilities for developing a LLW disposal facility in Connecticut to the Connecticut Hazardous Waste Management Service (CHWMS). The CHWMS is required to: prepare and revise, as necessary, a LLW Management Plan for the state; select a site for a LLW disposal facility; select a disposal technology to be used at the site; select a firm to obtain the necessary approvals for the facility and to develop and operate it; and serve as the custodial agency for the facility. This paper discusses progress in developing a facility.

Ground-water resources of north-central Connecticut

Science.gov (United States)

Cushman, Robert Vittum

1964-01-01

The term 'north-central Connecticut' in this report refers to an area of about 640 square miles within the central lowland of the Connecticut River basin north of Middletown. The area is mostly a broad valley floor underlain by unconsolidated deposits of Pleistocene and Recent age which mantle an erosional surface formed on consolidated rocks of pre-Triassic and Triassic age. The mean annual precipitation at Hartford, near the center of the area, is 42.83 inches and is uniformly distributed throughout the year. The average annual streamflow from the area is about 22 inches or about half the precipitation. The consolidated water-bearing formations are crystalline rocks of pre-Triassic age and sedimentary and igneous rocks of the Newark group of Triassic age. The crystalline rocks include the Middletown gneiss, the Maromas granite gneiss, the Glastonbury granite-gneiss of Rice and Gregory (1906), and the Bolton schist which form the basement complex and the Eastern Upland of north-central Connecticut. Enough water for domestic, stock, and small commercial use generally can be obtained from the crystalline rocks. Recoverable ground water occurs in the interconnected joints and fracture zones and is yielded in amounts ranging from 29 to 35 gpm (gallons per minute) to wells ranging in depth from 29 to 550 feet. The sedimentary rocks of Triassic age underlie all the Connecticut River Lowland and are predominantly arkosic sandstone and shale. Water supplies sufficient for domestic, stock, and small commercial use can be obtained from shallow wells penetrating these rocks, and larger supplies sufficient for industries and smaller municipalities can probably be obtained from deeper wells. Reported yields range from ? to 578 gpm; the larger yields are generally obtained from wells between 300 and 600 feet in depth. Yields are larger where the overlying material is sand and gravel or where the rocks are well fractured. The igneous rocks of Triassic age are basalt and have

Gun Violence, mental health, and Connecticut physicians.

Science.gov (United States)

Dodds, Peter R; Anderson, Caitlyn O; Dodds, Jon H

2014-01-01

While there is a public perception that gun violence is associated with mental illness we present evidence that it is a complex public health problem which defies simple characterizations and solutions. Only a small percentage of individuals with mental illness are at risk for extreme violence and they account for only a small percentage of gun-related homicides. Individuals who are at risk for gun violence are difficult to identify and successfully treat. The incidence, and perhaps the demographics, of gun violence vary substantially from state to state. We make a case for Connecticut physicians to study gun violence at the state level. We recommend that Connecticut physicians promote and expand upon the American Academy of Pediatrics' recommendation for creating a "safe home environment. "We suggest that guns be secured in all homes in which there are children. In addition we suggest that guns be voluntarily removed from homes in which there are individuals with a history of violence, threats of violence, depression, drug and/or alcohol abuse, and individuals with major mental illnesses who are not cooperating with therapy.

Geologic features of the Connecticut Valley, Massachusetts, as related to recent floods

Science.gov (United States)

Jahns, Richard Henry

1947-01-01

This report gives the results of a geologic study of certain features that bear upon the recent flood behavior of rivers flowing in the Massachusetts part of the Connecticut Valley. It is in part an outline of the physiographic history of the Connecticut River, a 'history that is treated in progressively greater detail as it concerns events occurring from Mesozoic time to the present, and in part a discussion of erosional and depositional processes associated with the extraordinary floods of March 1936 and September 1938. The Connecticut River flows southward through Massachusetts in a broad lowland area of more than 400 square miles and is joined in this area by four large tributaries, the Deerfield and Westfield Rivers from the west and the Millers and Chicopee Rivers from the east. The lowland area, or :Connecticut Valley province, is flanked on the west by the Berkshire Hills, a, deeply incised uplifted plateau, and on the east by the central upland, or Worcester .County plateau, a lower upland marked by rolling topography. Most of the broad, relatively flat valley floor is underlain by Triassic sedimentary rocks. Rising above it, however, are the prominent Holyoke-Mount Tom and Deerfield Ranges, which consist in large part of dark-colored igneous rocks, also of Triassic age. There is evidence of several cycles of erosion in central western Massachusetts, the last two of which are of Tertiary age and appear to have reached nature and very youthful stages of topographic development, respectively. Immediately prior to the glacial epoch, therefore, the Connecticut River flowed in a fairly narrow, deep gorge, which it had incised in the rather flat 5ottom of the valley that it had formed at an earlier stage. A Pleistocene crustal subsidence probably of several hundred feet, for which there has been only partial compensation in postglacial time, was responsible for the present position of much of this gorge below sea level. That an estuary does not now occupy the

Building Connecticut's clinical biodosimetry laboratory surge capacity to mitigate the health consequences of radiological and nuclear disasters: A collaborative approach between the state biodosimetry laboratory and Connecticut's medical infrastructure

International Nuclear Information System (INIS)

Albanese, Joseph; Martens, Kelly; Arnold, Jeffrey L.; Kelley, Katherine; Kristie, Virginia; Forte, Elaine; Schneider, Mark; Dainiak, Nicholas

2007-01-01

Biodosimetry, based on the analysis of dicentric chromosomes in circulating mononuclear cells, is considered the 'gold standard' for estimating radiation dose and is used to make informed decisions regarding the medical management of irradiated persons. This paper describes the development of biodosimetry laboratory surge capacity for the health consequences of radiological and nuclear disasters in Connecticut, including: (1) establishment of the Biodosimetry Laboratory for the timely assessment of radiation dosage in biodosimetry specimens; (2) identification of clinical laboratories qualified and willing to process biodosimetry specimens from a large number of victims; (3) training of clinical laboratorians in initial biodosimetry specimen processing; and (4) conducting a functional drill that evaluated the effectiveness of these elements. Descriptive information was obtained from: (1) personal observations; (2) a needs assessment of clinical laboratories in Connecticut; (3) records from a training program of clinical laboratorians in biodosimetry specimen processing that was developed and provided by the Yale New Haven Center for Emergency Preparedness and Disaster Response; and (4) records from a statewide functional drill in biodosimetry specimen processing that was developed and conducted by the State of Connecticut Biodosimetry Laboratory. A needs assessment of clinical laboratories in Connecticut identified 30 of 32 clinical laboratories qualified and willing to perform initial biodosimetry specimen processing. Currently, 79 clinical laboratorians in 19 of these qualified clinical laboratories have been trained in biodosimetry specimen processing. A functional exercise was conducted involving 37 of these trained clinical laboratorians in 18 qualified laboratories as well as the Biodosimetry Laboratory. The average turnaround time for biodosimetry specimen processing in this drill was 199 min. Exercise participants provided feedback which will be used to

Humanities Programming in Public Libraries: The Connecticut Perspective.

Science.gov (United States)

Rader, Barbara A.

1990-01-01

Describes how public libraries can plan, fund, and implement scholar-led, library-based, humanities book discussion programs using the example of the Southern Connecticut Library Council. Key steps in planning, funding, targeting the audience, selecting topics and books, obtaining community support, recruiting scholars, marketing, administration,…

ASME XI stroke time testing of solenoid valves at Connecticut Yankee Station

Energy Technology Data Exchange (ETDEWEB)

Martin, C.W.

1996-12-01

Connecticut Yankee Atomic Power Company has developed the capability of measuring the stroke times of AC and DC solenoid valves. This allows the station to measure the stroke time of any solenoid valve in the plant, even those valves which do not have valve stem position indicators. Connecticut Yankee has adapted the ITI MOVATS Checkmate 3 system, using a signal input from a Bruel and Kjaer (B&K) Model 4382 acoustic accelerometer and the Schaumberg Campbell Associates (SCA) Model SCA-1148 dual sensor, which is a combined accelerometer and gaussmeter.

ASME XI stroke time testing of solenoid valves at Connecticut Yankee Station

International Nuclear Information System (INIS)

Martin, C.W.

1996-01-01

Connecticut Yankee Atomic Power Company has developed the capability of measuring the stroke times of AC and DC solenoid valves. This allows the station to measure the stroke time of any solenoid valve in the plant, even those valves which do not have valve stem position indicators. Connecticut Yankee has adapted the ITI MOVATS Checkmate 3 system, using a signal input from a Bruel and Kjaer (B ampersand K) Model 4382 acoustic accelerometer and the Schaumberg Campbell Associates (SCA) Model SCA-1148 dual sensor, which is a combined accelerometer and gaussmeter

Recovery Ce from Ce - TBP Used Oxalic Acid

International Nuclear Information System (INIS)

Purwani, MV; Subagiono, R.; Suyanti

2007-01-01

Recovery or stripping Ce from Ce - TBP product of monazite sand used oxalic acid. Ce - TBP as organic phase and oxalic acid as aqueous phase and as strong precipitant compound to precipitate metal element. The stripping product as Ce - oxalic precipitate. The influence parameter were percentage of oxalic acid, volume ratio of Ce-TBP with oxalic acid, time and rate of stripping. At stripping of 25 ml Ce - TBP used oxalic acid, the optimum condition were achieve at using 5% oxalic acid, volume ratio of Ce - TBP : 5% oxalic acid = 1 : 1, time of stripping 7.5 minute and rate of stripping 150 rpm. At the optimum condition was obtained the recovery efficiency was 100%. (author)

Under Connecticut Skies: Exploring 100 Years of Astronomy at Van Vleck Observatory in Middletown, Connecticut

Science.gov (United States)

Kilgard, Roy E.; Williams, Amrys; Erickson, Paul; Herbst, William; Redfield, Seth

2017-01-01

Under Connecticut Skies examines the history of astronomy at Van Vleck Observatory, located on the campus of Wesleyan University in Middletown, Connecticut. Since its dedication in June of 1916, Van Vleck has been an important site of astronomical research, teaching, and public outreach. Over a thousand visitors pass through the observatory each year, and regular public observing nights happen year-round in cooperation with the Astronomical Society of Greater Hartford. Our project explores the place-based nature of astronomical research, the scientific instruments, labor, and individuals that have connected places around the world in networks of observation, and the broader history of how observational astronomy has linked local people, amateur observers, professional astronomers, and the tools and objects that have facilitated their work under Connecticut’s skies over the past 100 years. Our research team has produced a historical exhibition to help commemorate the observatory’s centennial that opened to the public in May of 2016. Our work included collecting, documenting, and interpretting this history through objects, archival documents, oral histories, photographs, and more. The result is both a museum and a working history "laboratory" for use by student and professional researchers. In addition to the exhibit itself, we have engaged in new interpretive programs to help bring the history of astronomy to life. Future work will include digitization of documents and teaching slides, further collection of oral histories, and expanding the collection to the web for use by off-site researches.

Missed opportunities to prevent tuberculosis in foreign-born persons, Connecticut, 2005-2008.

Science.gov (United States)

Guh, A; Sosa, L; Hadler, J L; Lobato, M N

2011-08-01

Factors that influence testing for latent tuberculosis infection (LTBI) among foreign-born persons in Connecticut are not well understood. To identify predictors for LTBI testing and challenges related to accessing health care among the foreign-born population in Connecticut. Foreign-born Connecticut residents with confirmed or suspected tuberculosis (TB) disease during June 2005-December 2008 were interviewed regarding health care access and immigration status. Predictors for self-reported testing for LTBI after US entry were determined. Of 161 foreign-born persons interviewed, 48% experienced TB disease within 5 years after arrival. One third (51/156) reported having undergone post-arrival testing for LTBI. Although those with established health care providers were more likely to have reported testing (aOR 4.49, 95%CI 1.48-13.62), only 43% of such persons were tested. Undocumented persons, the majority of whom lacked a provider (53%), were less likely than documented persons to have reported testing (aOR 0.20, 95%CI 0.06-0.67). Hispanic permanent residents (immigrants and refugees) and visitors (persons admitted temporarily) were more likely than non-Hispanics in the respective groups to have reported testing (OR 5.25, 95%CI 1.51-18.31 and OR 7.08, 95%CI 1.30-38.44, respectively). The self-reported rate of testing for LTBI among foreign-born persons in Connecticut with confirmed or suspected TB was low and differed significantly by ethnicity and immigration status. Strategies are needed to improve health care access for foreign-born persons and expand testing for LTBI, especially among non-Hispanic and undocumented populations.

Deposition of a saline giant in the Mississippian Windsor Group, Nova Scotia, and the nascent Late Paleozoic Ice Age

Science.gov (United States)

MacNeil, Laura A.; Pufahl, Peir K.; James, Noel P.

2018-01-01

Saline giants are vast marine evaporite deposits that currently have no modern analogues and remain one of the most enigmatic of chemical sedimentary rocks. The Mississippian Windsor Group (ca. 345 Ma), Maritimes Basin, Atlantic Canada is a saline giant that consists of two evaporite-rich sedimentary sequences that are subdivided into five subzones. Sequence 1 is composed almost entirely of thick halite belonging to Subzone A (Osagean). Sequence 2 is in unconformable contact and comprised of stacked carbonate-evaporite peritidal cycles of Subzones B through E (Meramecian). Subzone B, the focus of research herein, documents the transition from wholly evaporitic to open marine conditions and thus, preserves an exceptional window into the processes forming saline giants. Lithofacies stacking patterns in Subzone B reveal that higher-order fluctuations in relative sea level produced nine stacked parasequences interpreted to reflect high frequency glacioeustatic oscillations during the onset of the Late Paleozoic Ice Age. Each parasequence reflects progradation of intertidal and sabkha sediments over subtidal carbonate and evaporite deposits. Dissimilarities in cycle composition between sub-basins imply the development of contrasting brine chemistries from differing recharge rates with the open ocean. What the Windsor Group shows is that evaporite type is ostensibly linked to the amplitude and frequency of sea level rise and fall during deposition. True saline giants, like the basinwide evaporites of Sequence 1, apparently require low amplitude, long frequency changes in sea level to promote the development of stable brine pools that are only periodically recharged with seawater. By contrast, the high amplitude, short frequency glacioeustatic variability in sea level that controlled the accumulation of peritidal evaporites in Subzone B produce smaller, subeconomic deposits with more complex facies relationships.

Nitrogen concentrations and loads for the Connecticut River at Middle Haddam, Connecticut, computed with the use of autosampling and continuous measurements of water quality for water years 2009 to 2014

Science.gov (United States)

Mullaney, John R.; Martin, Joseph W.; Morrison, Jonathan

2018-03-20

The daily and annual loads of nitrate plus nitrite and total nitrogen for the Connecticut River at Middle Haddam, Connecticut, were determined for water years 2009 to 2014. The analysis was done with a combination of methods, which included a predefined rating curve method for nitrate plus nitrite and total nitrogen for water years 2009 to 2011 and a custom rating curve method that included sensor measurements of nitrate plus nitrite nitrogen concentration and turbidity along with mean daily flow to determine total nitrogen loads for water years 2011 to 2014. Instantaneous concentrations of total nitrogen were estimated through the use of a regression model based on sensor measurements at 15-minute intervals of nitrate plus nitrite nitrogen and turbidity for water years 2011 to 2014.Annual total nitrogen loads at the Connecticut River at Middle Haddam ranged from 12,900 to 19,200 metric tons, of which about 42 to 49 percent was in the form of nitrate plus nitrite. The mean 95-percent prediction intervals on daily total nitrogen load estimates were smaller from the custom model, which used sensor data, than those calculated by the predefined model.Annual total nitrogen load estimates at the Connecticut River at Middle Haddam were compared with the upstream load estimates at the Connecticut River at Thompsonville, Conn. Annual gains in total nitrogen loads between the two stations ranged from 3,430 to 6,660 metric tons. These increases between the two stations were attributed to the effects of increased urbanization and to combined annual discharges of 1,540 to 2,090 metric tons of nitrogen from 24 wastewater treatment facilities in the drainage area between the two stations. The contribution of total nitrogen from wastewater discharge between the two stations had declined substantially before the beginning of this study and accounted for from 31 to 52 percent of the gain in nitrogen load between the Thompsonville and Middle Haddam sites.

"You Say Tomato, I Say Solanum Lycopersicum Containing Beta-ionone and Phenylacetaldehyde": an Analysis of Connecticut's GMO Labeling Legislation.

Science.gov (United States)

Nunziato, Travis

2014-01-01

"You Say Tomato, I Say Solanum Lycopersicum Containing Beta-ionone and Phenylacetaldehyde" discusses the importance of requiring labels on products that contain genetically modified organisms, focusing on Connecticut's GMO Labeling statutes, as it is they are the first of their kind in the nation. The article will compare Connecticut's law to the legislation found in Australia, highlighting the positive aspects of Connecticut's bill and identifying its key weaknesses, namely the "trigger clause" found in the statute. Part I will provide an overview of Genetic Modification and provide a brief history of Biotechnology. It will also provide a brief overview of the federal regulatory framework in biotechnology, as well as evaluate the United States Food and Drug Association's role of regulating genetic modification. Part I will conclude by discussing how the American public has shown that labeling GMOs is important, and something that should occur. Part II of this article will explore Connecticut's recent legislation requiring labels on products that contain GMOs. Part III will explore Australia's legislation requiring labels on products containing GMOs, comparing Australia's law to Connecticut's legislation.

Connecticut Takes a Cautious First Step in Establishing a Statewide, Interactive, Distance Learning Cable Franchise Operator Interconnection.

Science.gov (United States)

Pietras, Jesse John

Remote education has arrived in Connecticut and is promising to expand, as this discussion of its development, progress, and difficulties demonstrates. In June 1993, state legislation mandated a feasibility study of ways to bring about bidirectional educational programming among Connecticut's 26 cable-franchise operators. Cost allocation for the…

Recurrent mass mortalities of the blueback herring, Alosa aestivalis, in the lower Connecticut River

International Nuclear Information System (INIS)

Moss, S.A.; Leggett, W.C.; Boyd, W.A.

1976-01-01

The authors studied 5 mass mortalities of blueback herring, Alosa aestivalis between 1965 and 1971. The reach of the Connecticut River in which the mortalities were observed includes the region thermally influenced by cooling water effluents from the Connecticut Yankee Atomic Power Plant. This warm water effluent has not been related to catastrophic blueback herring mortalities to the present time. The mortalities observed in 1965, 1966, and 1967 occurred before the plant became operational. The years of no abnormal mortalities, 1968, 1969, and 1970 coincided with periods of near-maximum generating output by this power plant. Only in June, 1971, did power plant operation coincide with a mass mortality of herring. Nevertheless, the occurrence of herring mortalities in four years out of seven observed suggests that further deterioration of water quality in the Connecticut River may threaten the continued spawning success of this fish. 9 references, 4 figures, 4 tables

Connecticut warm mix asphalt (WMA) pilot projects 2010 and 2011.

Science.gov (United States)

2014-06-01

WMA overlays were placed in several pilot projects in Connecticut during the 2010 and 2011 construction : seasons. These technologies included Sasobit, Evotherm, Advera, Double-Barrel Green foamed : asphalt as well as SonneWarmix. The res...

The joint EC/EPA mid-Connecticut test program

International Nuclear Information System (INIS)

Kilgroe, J.D.; Brna, T.G.

1991-01-01

In early 1989, Environment Canada and the U.S. Environmental Protection Agency sponsored a comprehensive test program on a refuse-derived fuel (RDF) unit of the Mid-Connecticut facility in Hartford. The program, conducted in cooperation with the Connecticut Resource Recovery Authority (CRRA), the facility's operator, included characterization and performance test phases. The results of the characterization tests were used in defining both the combustion and flue gas cleaning system operating conditions for the performance tests. The results of the performance tests are emphasized in this paper and are summarized in three parts. First, the combustion tests results will be addressed and related to good combustion practice for RDF combustors. Then, the performance of the lime spray dryer absorber/fabric filter system in controlling acid gas (hydrogen chloride, sulfur dioxide), trace organic [polychlorinated dibenzodioxin (PCDD) and polychlorinated dibenzofuran (PCDF)], trace metal [arsenic (as), cadmium (Cd), chromium (Cr), lead (Pb), mercury (Hg), nickel (Ni), and zinc (Zn)], and particulate matter (PM) emissions will be discussed. Finally, the results of ash/residue analyses will be presented

Digital preservation of a highway photolog film archive in Connecticut.

Science.gov (United States)

2014-01-28

The Connecticut Department of Transportation has been photologging their transportation network : for over forty years. Photologging at a minimum refers to the use of an instrumented vehicle, which is : designed to capture successive photographs of t...

Connecticut Children's Medical Center multi-year branding campaign.

Science.gov (United States)

Botvin, J

2000-01-01

As the only children's hospital in the state, Connecticut Children's Medical Center was challenged by the inherent complacency of parents. It met the challenge through a multi-level marketing effort which included television and radio, community outreach and strong media relations. By emphasizing the unique nature of children, the campaign affirms the need for a specialized children's health center.

Integration of fall prevention into state policy in Connecticut.

Science.gov (United States)

Murphy, Terrence E; Baker, Dorothy I; Leo-Summers, Linda S; Bianco, Luann; Gottschalk, Margaret; Acampora, Denise; King, Mary B

2013-06-01

To describe the ongoing efforts of the Connecticut Collaboration for Fall Prevention (CCFP) to move evidence regarding fall prevention into clinical practice and state policy. A university-based team developed methods of networking with existing statewide organizations to influence clinical practice and state policy. We describe steps taken that led to funding and legislation of fall prevention efforts in the state of Connecticut. We summarize CCFP's direct outreach by tabulating the educational sessions delivered and the numbers and types of clinical care providers that were trained. Community organizations that had sustained clinical practices incorporating evidence-based fall prevention were subsequently funded through mini-grants to develop innovative interventional activities. These mini-grants targeted specific subpopulations of older persons at high risk for falls. Building collaborative relationships with existing stakeholders and care providers throughout the state, CCFP continues to facilitate the integration of evidence-based fall prevention into clinical practice and state-funded policy using strategies that may be useful to others.

Arsenic and uranium in private wells in Connecticut, 2013-15

Science.gov (United States)

Flanagan, Sarah M.; Brown, Craig J.

2017-05-03

The occurrence of arsenic and uranium in groundwater at concentrations that exceed drinking-water standards is a concern because of the potential adverse effects on human health. Some early studies of arsenic occurrence in groundwater considered anthropogenic causes, but more recent studies have focused on sources of naturally occurring arsenic to groundwater, such as minerals within aquifer materials that are in contact with groundwater. Arsenic and uranium in groundwater in New England have been shown to have a strong association to the geologic setting and nearby streambed sediment concentrations. In New Hampshire and Massachusetts, arsenic and uranium concentrations greater than human-health benchmarks have shown distinct spatial patterns when related to the bedrock units mapped at the local scale.The Connecticut Department of Public Health (DPH) reported that there are about 322,600 private wells in Connecticut serving approximately 823,000 people, or 23 percent of the State’s population. The State does not require that existing private wells be routinely tested for arsenic, uranium, or other contaminants; consequently, private wells are only sampled at the well owner’s discretion or when they are newly constructed. The U.S. Geological Survey (USGS), in cooperation with the DPH, completed an assessment in 2016 on the distribution of concentrations of arsenic and uranium in groundwater from bedrock in Connecticut. This report presents the major findings for arsenic and uranium concentrations from water samples collected from 2013 to 2015 from private wells.

Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus Preliminary Evaluation Results

Science.gov (United States)

2008-10-16

This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The report discusses the planned fuel cell bus demonstration and equipment us...

Insane acquittees and insane convicts: the rationalization of policy in nineteenth-century Connecticut.

Science.gov (United States)

Goodheart, Lawrence B

2017-12-01

A current situation in Connecticut of whether a violent insane acquittee should be held in a state prison or psychiatric facility raises difficult issues in jurisprudence and medical ethics. Overlooked is that the present case of Francis Anderson reiterates much of the debate over rationalization of policy during the formative nineteenth century. Contrary to theories of social control and state absolutism, governance in Connecticut was largely episodic, indecisive and dilatory over much of the century. The extraordinary urban and industrial transformation at the end of the Gilded Age finally forced a coherent response in keeping with longstanding legal and medical perspectives.

Digital Learning Compass: Distance Education State Almanac 2017. Connecticut

Science.gov (United States)

Seaman, Julia E.; Seaman, Jeff

2017-01-01

This brief report uses data collected under the U.S. Department of Education's National Center for Educational Statistics (NCES) Integrated Postsecondary Education Data System (IPEDS) Fall Enrollment survey to highlight distance education data in the state of Connecticut. The sample for this analysis is comprised of all active, degree-granting…

Public School Principals' Experiences with Interpreting and Implementing Connecticut's Anti-Bullying Law (Connecticut General Statute Section 10-222d): A Statewide Survey

Science.gov (United States)

LaRocco, Diana J.; Nestler-Rusack, Donna; Freiberg, Jo Ann

2007-01-01

Background: In June 2002, the State of Connecticut General Assembly (CGA) passed Public Act 02-119, An Act Concerning Bullying Behavior in Schools and Concerning the Pledge of Allegiance. Section 1 mandated that each local and regional board of education (school district) develop a policy to address bullying in its schools. Conn. Gen. Statute…

Connecticut church passes genetics resolution.

Science.gov (United States)

Culliton, B J

1984-11-09

The Connecticut Conference of the United Church of Christ, which represents the largest Protestant denomination in the state, has passed a resolution affirming an ethical duty to do research on human gene therapy and is planning to form local church groups to study the scientific and ethical issues involved. The resolution is intended to counter an earlier one proposed by Jeremy Rifkin to ban all efforts at engineering specific traits into the human germline. The Rifkin proposal had been endorsed by a large number of religious leaders, including the head of the U.S. United Church of Christ, but was subsequently characterized by many of the church leaders as overly restrictive.

National Uranium Resource Evaluation: Albany Quadrangle, Massachusetts, New York, Connecticut, Vermont, and New Hampshire

Energy Technology Data Exchange (ETDEWEB)

Field, M T; Truesdell, D B

1982-09-01

The Albany 1/sup 0/ x 2/sup 0/ Quadrangle, Massachusetts, New York, Connecticut, Vermont, and New Hampshire, was evaluated to a depth of 1500 m for uranium favorability using National Uranium Resource Evaluation criteria. Areas of favorable geology and aeroradioactivity anomalies were examined and sampled. Most Triassic and Jurassic sediments in the Connecticut Basin, in the central part of the quadrangle, were found to be favorable for sandstone uranium deposits. Some Precambrian units in the southern Green Mountains of Vermont were found favorable for uranium deposits in veins in metamorphic rocks.

National Uranium Resource Evaluation: Albany Quadrangle, Massachusetts, New York, Connecticut, Vermont, and New Hampshire

International Nuclear Information System (INIS)

Field, M.T.; Truesdell, D.B.

1982-09-01

The Albany 1 0 x 2 0 Quadrangle, Massachusetts, New York, Connecticut, Vermont, and New Hampshire, was evaluated to a depth of 1500 m for uranium favorability using National Uranium Resource Evaluation criteria. Areas of favorable geology and aeroradioactivity anomalies were examined and sampled. Most Triassic and Jurassic sediments in the Connecticut Basin, in the central part of the quadrangle, were found to be favorable for sandstone uranium deposits. Some Precambrian units in the southern Green Mountains of Vermont were found favorable for uranium deposits in veins in metamorphic rocks

Weatherization Makes Headlines in Connecticut: Weatherization Assistance Close-Up Fact Sheet

International Nuclear Information System (INIS)

2001-01-01

Connecticut demonstrates its commitment to technology and efficiency through the Weatherization Program. Weatherization uses advanced technologies and techniques to reduce energy costs for low-income families by increasing the energy efficiency of their homes

Weatherization Makes Headlines in Connecticut: Weatherization Assistance Close-Up Fact Sheet

Energy Technology Data Exchange (ETDEWEB)

D& R International

2001-10-10

Connecticut demonstrates its commitment to technology and efficiency through the Weatherization Program. Weatherization uses advanced technologies and techniques to reduce energy costs for low-income families by increasing the energy efficiency of their homes.

2016 Coastal Connecticut MLLW ADS80 4-Band 16 Bit Imagery

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Project: NOAA 2016 Multispectral Coastal Imagery Project - Connecticut Shoreline Orthoimagery Contract No. EA133C11CQ0010 Reference No. NCNP0000-16-01163 Woolpert...

Annual State of Connecticut Obstetrics and Gynecology Resident Research Day.

Science.gov (United States)

Seagle, Brandon-Luke L; Ballard, Jennifer; Kakar, Freshta; Panarelli, Erin; Samuelson, Robert; Shahabi, Shohreh

2015-01-01

To increase opportunities for Obstetrics and Gynecology(Ob/Gyn) residents to present their research, an Annual State of Connecticut Ob/Gyn Resident Research Day (RRD) was created. At the first annual RRD, 33 residents, representing five of six Connecticut Ob/Gyn residency programs, presented 39 poster and eight oral presentations. RRD evaluators rated the overall symposium and the quality of resident oral and poster presentations as either "excellent" or "above average." Residency program directors reported that the symposium was "very helpful" for evidencing resident scholarship as required by the Accreditation Council for Graduate Medical Education (ACGME). Surveyed residents reported that the symposium promoted their research and was a valuable investment of their time. An annual specialty-specific, statewide RRD was created, experienced good participation, and was well evaluated. The annual, statewide Ob/Gyn RRD may serve as a model for development of other specialty-specific, statewide RRD events.

Practical applications of injury surveillance: a brief 25-year history of the Connecticut Injury Prevention Center.

Science.gov (United States)

Lapidus, Garry; Borrup, Kevin; DiVietro, Susan; Campbell, Brendan T; Beebe, Rebecca; Grasso, Damion; Rogers, Steven; Joseph, D'Andrea; Banco, Leonard

2016-04-01

The mission of the Connecticut Injury Prevention Center (CIPC), jointly housed in Connecticut Children's Medical Center and Hartford Hospital, is to reduce unintentional injury and violence among Connecticut residents, with a special focus on translating research into injury prevention programmes and policy. The CIPC engages in four core activities: research, education and training, community outreach programmes and public policy. As surveillance is an essential element of injury prevention, the CIPC has developed a robust statewide fatal and non-fatal injury surveillance system that has guided our prior work and continues to inform our current projects. The purpose of this article is to review the projects, programmes, and collaborative relationships that have made the CIPC successful in reducing unintentional injury and violence in Connecticut throughout the course of its 25 years history. Retrospective review of the application of injury surveillance. We believe that the application of our surveillance system can serve as a model for others who wish to engage in collaborative, community-based, data-driven injury prevention programmes in their own communities. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Preliminary Evaluation Results

Energy Technology Data Exchange (ETDEWEB)

Chandler, K.; Eudy, L.

2008-10-01

This report provides preliminary results from a National Renewable Energy Laboratory evaluation of a protoptye fuel cell transit bus operating at Connecticut Transit in Hartford. Included are descriptions of the planned fuel cell bus demonstration and equipment; early results and agency experience are also provided.

Final Report-Confirmatory Survey Results for the ABB Combustion Engineering Site, Windsor, Connecticut; Revision 1 (DCN 5158-SR-02-1) (Docket No. 030-03754; RFTA No. 12-003)

Energy Technology Data Exchange (ETDEWEB)

ADAMS, WADE C

2013-01-28

The objectives of the confirmatory activities were to provide independent contractor field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the contractor's procedures and FSS results. ORAU reviewed ABB CE's decommissioning plan, final status survey plan, and the applicable soil DCGLs, which were developed based on an NRC-approved radiation dose assessment. The surveys included gamma surface scans, gamma direct measurements, and soil sampling.

The Utilization of Inquiry-Based Science Instruction in Connecticut

Science.gov (United States)

Bozzuto, David M.

The purpose of this study was to explore the perspectives of practitioners of inquiry-based instruction from 35 Connecticut school districts. The source of the participants, Connecticut State Science Assessment Advisory Committee members, and their involvement in science education acted to bound the research. Using a multiple case study design, data were gathered from 28 participants: teachers n = 21, curriculum leaders n = 4, professional development experts n = 2, and state education advisor/ teacher preparation expert n = 1 involved with Connecticut schools. Each participant was asked to complete an online demographic and inquiry utilization questionnaire. From the results of the questionnaires, a cadre of 11 participants was selected to participate in semi-structured interviews. A round of follow-up interviews of five key participants was conducted to further clarify the phenomenon. Two of the follow up interviewees were observed using the EQUIP rubric to assess inquiry implementation. Artifacts such as minutes, PowerPoint presentations, and a reflexive journal were collected throughout the study. An inductive approach to content analysis of data from the survey and interviews was used to explore constructs, themes, and patterns. After segmentation took place, the data were categorized to allow patterns and constructs to emerge. The data were reduced based on the emergent design and those reductions, or themes, were informed by ongoing data collection using constant comparison as different levels of codes emerge. Data collection further informed data analysis and future data collection. Initial coding of patterns was reduced until theoretical saturation occurred and the data allowed five thematic findings to emerge from the data. The five themes were: teach, process, impasse, develop, and support. The significance of each theme and its implication for practitioners and researchers were discussed and offered, respectively.

Supported Employment in Connecticut: An Examination of Integration and Wage Outcomes.

Science.gov (United States)

Helms, Barbara L.; And Others

1991-01-01

Study of a sample of 93 individuals with disabilities participating in supported employment programs in Connecticut found that monthly wages and levels of integration increased significantly when compared to working situations prior to supported employment placement. (JDD)

Not-for-profit hospital CEO performance and pay: some evidence from Connecticut.

Science.gov (United States)

Kramer, Jeffrey; Santerre, Rexford E

2010-01-01

This paper uses observations from a panel data set of 35 chief executive officers (CEOs) from 29 not-for-profit hospitals in Connecticut over the period 1998 to 2006 to investigate the relationship between CEO performance and pay. Both economic and charity performance measures are specified in the empirical model. The multiple regression results reveal that not-for-profit hospital CEOs, at least in Connecticut, are driven at the margin to increase the occupancy rate of privately insured patients at the expense of uncompensated care and public-pay patients. This type of behavior on the part of not-for-profit hospital CEOs calls into question the desirability of allowing these hospitals a tax exemption on earned income, property, and purchases.

Connecticut School Integration: Moving Forward as the Northeast Retreats

Science.gov (United States)

Orfield, Gary

2015-01-01

This report analyzes the data on changes in patterns of racial segregation and their education consequences over a quarter century, from l987 to 2012. It examines a major transition in the racial and ethnic composition of Connecticut and the changes in integration and segregation in the schools of the state and its urban communities and it…

Rhode Island, Connecticut, New York, and New Jersey ESI: INVERT (Invertebrate Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for marine, estuarine, and terrestrial invertebrate species in coastal Rhode Island, Connecticut, New York,...

Fish Consumption in Connecticut, Florida, Minnesota, and North Dakota (Final Report)

Science.gov (United States)

In August 2013, EPA announced the availability of the final report,Fish Consumption in Connecticut, Florida, Minnesota, and North Dakota. Many state and local health agencies throughout the United States conduct area-specific surveys that monitor and evaluate contaminant ...

Rhode Island, Connecticut, New York, and New Jersey ESI: INVERTPT (Invertebrate Points)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for rare terrestrial invertebrates in coastal Rhode Island, Connecticut, New York, and New Jersey. Vector...

Literacy and the Black Church: A Demonstration Project in Connecticut.

Science.gov (United States)

Lakes, Richard D.; Lewis, Linda H.

1990-01-01

The Literacy Improvement Needs Collaboration in Bridgeport, Connecticut, was assisted by African-American ministers from the Interdenominational Ministerial Alliance in recruiting adults from the community for a literacy program and 50 volunteers to serve as tutors and community liaisons. Some of the stigma of illiteracy was alleviated by using…

Rhode Island, Connecticut, New York, and New Jersey ESI: FISH (Fish Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for marine, estuarine, and anadromous fish species in coastal Rhode Island, Connecticut, New York, and New...

NOAA Digital Orthophotography for the Coasts of Connecticut and Long Island, NY

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Project: NOAA Digital Orthophotography for the Coasts of Main/New Hampshire, Massachusetts/Rhode Island/Connecticut, and Hudson River/Long Island /NY/NJ Contract No....

Rhode Island, Connecticut, New York, and New Jersey ESI: FISHL (Fish Lines)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for anadromous fish species in coastal Rhode Island, Connecticut, New York, and New Jersey. Vector arcs in...

Rhode Island, Connecticut, New York, and New Jersey ESI: NESTS (Nest Points)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for nesting birds in coastal Rhode Island, Connecticut, New York, and New Jersey. Vector points in this...

Magnetic behaviour of cerium in Ce2 Sn5 and Ce3 Sn7, surstructures of Ce Sn3

International Nuclear Information System (INIS)

Stunault, A.

1988-07-01

The compound studied, Ce 2 Sn 5 and Ce 3 Sn 7 are both orthorhombic, surstructure of cubic Ce Sn 3 . Magnetic susceptibility measurements show in both compounds an antiferromagnetic order at low temperature and magnetization shows a high anisotropy. Magnetization densities are determined by polarized neutron diffraction. The cerium site which has two Ce atoms as nearest neighbourgs carries all the magnetism in both structures. For Ce 2 Sn 5 moments are directed as the high magnetization axis and structure is modulated. Ce 3 Sn 7 presents a simple antiferromagnetic order but moment are directed as low magnetization axis. Various transitions towards a ferromagnetic order are presented. Results are interpreted by measuring the difference between energy levels of crystalline field. A model of crystalline field and isotrope exchange agrees well with Ce 3 Sn 7 , but for Ce 2 Sn 7 it is necessary to reduce the magnetic moment which is typical of the Kondo effect [fr

CE and nanomaterials - Part II: Nanomaterials in CE.

Science.gov (United States)

Adam, Vojtech; Vaculovicova, Marketa

2017-10-01

The scope of this two-part review is to summarize publications dealing with CE and nanomaterials together. This topic can be viewed from two broad perspectives, and this article is trying to highlight these two approaches: (i) CE of nanomaterials, and (ii) nanomaterials in CE. The second part aims at summarization of publications dealing with application of nanomaterials for enhancement of CE performance either in terms of increasing the separation resolution or for improvement of the detection. To increase the resolution, nanomaterials are employed as either surface modification of the capillary wall forming open tubular column or as additives to the separation electrolyte resulting in a pseudostationary phase. Moreover, nanomaterials have proven to be very beneficial for increasing also the sensitivity of detection employed in CE or even they enable the detection (e.g., fluorescent tags of nonfluorescent molecules). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Social Vulnerability Index (SoVI) for Connecticut based on 2000 Census Block Groups

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data depicts the social vulnerability of Connecticut census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

An Odyssey of Connecticut's Children: KIDS COUNT Data Book 2001.

Science.gov (United States)

Sampson, Amy E.

This Kids Count Data Book provides state and regional trends in the well-being of Connecticut's children. The statistical portrait is based on 19 indicators of well-being: (1) children in families receiving welfare; (2) children receiving free or reduced-price meals; (3) high school employment; (4) births to teen mothers; (5) low birth weight; (6)…

Pyrazolates advance cerium chemistry: a CeIII/CeIV redox equilibrium with benzoquinone.

Science.gov (United States)

Werner, Daniel; Deacon, Glen B; Junk, Peter C; Anwander, Reiner

2017-05-16

Two stable cerium(iv) 3,5-dialkylpyrazolate complexes are presented, namely dimeric [Ce(Me 2 pz) 4 ] 2 (Me 2 pz = 3,5-dimethylpyrazolate) and monomeric Ce(tBu 2 pz) 4 (tBu 2 pz = 3,5-di-tert-butylpyrazolate) along with their trivalent counterparts [Ce(Me 2 pz) 3 ] and [Ce(tBu 2 pz) 3 ] 2 . All complexes were obtained from protonolysis reactions employing the silylamide precursors Ce[N(SiHMe 2 ) 2 ] 4 and Ce[N(SiMe 3 ) 2 ] 3 . Treatment of homoleptic Ce IV and Ce III Me 2 pz complexes with 1,4-hydroquinone (H 2 hq) or 1,4-benzoquinone (bq), respectively, ultimately gave the same trimetallic Ce III species via a cerium redox equilibrium. The Ce III complex Ce 3 (Me 2 pz) 5 (pchd) 2 (L) (pchd = 1,4-bis(3,5-dimethylpyrazol-1-yl)cyclohex-2,5-diene-1,4-diolato; L = Me 2 pzH or (thf) 2 ) results from a di-1,4-pyrazolyl attack on pre-coordinated bq. The reduction of bq by [Ce(Me 2 pz) 3 (thf)] 2 , and re-oxidation by the resulting Ce IV species was supported by UV-vis spectroscopic investigations. Comparisons with the redox-innocent complexes [Ln(Me 2 pz) 3 (thf)] 2 (Ln = La and Pr) revealed far less selective reactions with bq, giving hexametallic and octametallic rare-earth metal side products containing 2-Me 2 pz substituted hq ligands.

EPR study of concentration dependence in Ce, Ce : La and Ce:Y doped SrF2

NARCIS (Netherlands)

Dankert, O.; Vainchtein, David; Datema, H.C.; den Hartog, Hendrik

1995-01-01

Experimental results of an EPR-study of the concentration dependence of the doubly integrated intensity and linewidth of the signals associated with tetragonal Ce3+-F--dipoles in Sr1-xCexF2+x, Sr-1-0.005-x Ce0.005LaxF2+0.005+x and Sr-1-0.005-x Ce0.005YxF2+0.005+x are presented. Both show a nonlinear

Coherence Kondo gap in CeNiSn and CeRhSb

International Nuclear Information System (INIS)

Takabatake, T.; Nakamoto, G.; Tanaka, H.; Bando, Y.; Fujii, H.; Nishigori, S.; Goshima, H.; Suzuki, T.; Fujita, T.; Oguro, I.; Hiraoka, T.; Malik, S.K.

1994-01-01

CeNiSn and CeRhSb are Kondo-lattice compounds showing the behavior of a small-gap semiconductor at temperatures below 7 K. We review and discuss the magnetic, transport and specific-heat measurements performed on single crystals of CeNiSn and polycrystals of CeRhSb. Prerequisites for gap formation are deduced from the effects of substitution and application of a magnetic field and pressure on the gapped state. ((orig.))

OFF-GAS ANALYSIS RESULTS AND FINE PORE RETROFIT INFORMATION FOR GLASTONBURY, CONNECTICUT

Science.gov (United States)

In the summer of 1984, the Glastonbury, Connecticut Water Pollution Control Plant underwent a retrofit from a spiral roll coarse bubble to a spiral roll fine pore aeration system. Only diffuser replacement was performed in the aeration tanks. From November 1985 through Septembe...

Influence of Ce-H bonding on the physical properties of the hydrides CeCoSiH1.0 and CeCoGeH1.0

International Nuclear Information System (INIS)

Chevalier, B; Matar, S F; Menetrier, M; Marcos, J Sanchez; Fernandez, J Rodriguez

2006-01-01

The hydrides CeCoSiH 1.0 and CeCoGeH 1.0 which crystallize like the parent antiferromagnetic compounds CeCoSi and CeCoGe in the tetragonal CeFeSi-type structure, have been investigated by specific heat and thermoelectric power measurements and 1 H nuclear magnetic resonance (NMR). CeCoSiH 1.0 is an intermediate valence compound whereas CeCoGeH 1.0 can be considered as a nearly trivalent cerium compound. This behaviour is corroborated by the occurrence of a slight broadening of the 1 H NMR signal in the sequence CeCoSiH 1.0 → CeCoGeH 1.0 . The band structure calculations performed on these hydrides reveal the existence of strong bonding Ce-H interaction, found to be larger in CeCoSiH 1.0 than in CeCoGeH 1.0

Connecticut's Evolving Interactive Distance Learning Network in the Cable and Telecommunications Industries.

Science.gov (United States)

Pietras, Jesse John

This paper describes the state of interactive distance learning in Connecticut, particularly the current and future provision of these services by the telecommunications and cable television industries. The overview examines questions of where obligation and responsibility lie (with schools, local exchange companies, cable franchises, etc.) in…

Rhode Island, Connecticut, New York, and New Jersey ESI: M_MAMMAL (Marine Mammal Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for seals, whales, and dolphins in coastal Rhode Island, Connecticut, and the New York/New Jersey...

Rhode Island, Connecticut, New York, and New Jersey ESI: HABPT (Habitat and Plant Points)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for rare terrestrial plants in coastal Rhode Island, Connecticut, New York, and New Jersey. Vector points...

History of Connecticut's short-term strain program for evaluation of steel bridges : July 2009.

Science.gov (United States)

2009-07-01

Non-destructive strain monitoring has been used for two decades on Connecticuts bridges to : supplement visual field inspections. These studies have addressed a wide range of problems, : including fatigue cracking in diaphragm connections, cracked...

Rhode Island, Connecticut, New York, and New Jersey ESI: T_MAMMAL (Terrestrial Mammal Polygons)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for small mammal species in coastal Rhode Island, Connecticut, New York, and New Jersey. Vector polygons in...

Comment on “Synthesis of ceria (CeO_2 and CeO_2_−_x) nanoparticles via decarbonation and Ce(III) oxidation of synthetic bastnaesite (CeCO_3F)” by Montes-Hernandez et al

International Nuclear Information System (INIS)

Gysi, Alexander P.; Williams-Jones, Anthony E.

2016-01-01

Montes-Hernandez et al. [5] recently reported results of a study of the decarbonation of fine-grained synthetic bastnäsite-(Ce) precipitates involving the oxidation of Ce(III) to Ce(IV) and the formation of ceria (CeO_2 and CeO_2_-_x with oxygen vacancies) nano-particles. The purpose of their study was to show that oxidation of Ce(III) to Ce(IV) occurs spontaneously during heating of bastnäsite-(Ce) in air, a vacuum, N_2 or Ar gas. However, their interpretation of the formation of CeO_2 is not supported by the findings of Gysi and Williams-Jones [3], who showed that natural bastnäsite-(Ce) decomposes to form rare earth element (REE) oxyfluorides (REEOF). The latter was documented using differential scanning calorimetric (DSC) and thermogravimetric (TGA) experiments under a deoxygenated N_2 atmosphere. In their experiments, Gysi and Williams-Jones [3] found no evidence for the oxidation of Ce(III) to Ce(IV). This raises the question of whether the experiments of Montes-Hernandez et al. [5] in a N_2 atmosphere (and by extension in an Ar atmosphere) were compromised because of contamination by O_2 and that, as a result, they reached the erroneous conclusion that Ce(III) oxidizes spontaneously to Ce(IV) during heating of bastnäsite-(Ce) under these conditions. In order to explain the disagreement between their findings and those of Gysi and Williams-Jones [3], Montes-Hernandez et al. [5], proposed that the X-ray diffraction data of the former study were incorrectly interpreted. Here, we provide further evidence that the natural bastnäsite-(Ce) employed in the study by Gysi and Williams-Jones [3] decomposed to form REE oxyfluorides (i.e., CeOF, LaOF, PrOF and NdOF) and not CeO_2, and supply explanations for why Montes-Hernandez et al. [5] erroneously concluded that CeO_2 is produced during decomposition of this mineral under N_2 and Ar atmospheres. In so doing, we hope to provide new insights into the decomposition of bastnäsite-(Ce) that will help guide future

Rhode Island, Connecticut, New York, and New Jersey ESI: M_MAMPT (Marine Mammal Points)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for seal haul-out sites in coastal Rhode Island, Connecticut, New York, and New Jersey. Vector points in...

Lattice dynamics of γ--Ce

International Nuclear Information System (INIS)

Gould, T.A.

1978-08-01

The phonon and magnetic measurements described in the thesis produced the following significant results concerning the lattice dynamical and magnetic properties of γ-Ce. The phonon spectrum is relatively soft, which is consistent with results obtained for CeSn 3 . The L [110] and T [111] branches of the dispersion curve are anomalous. The C 11 and C 44 elastic constants are quite close in value. No discrete magnetic excitations were observed. The magnetic scattering is qualitatively similar to the results from Ce 0 . 74 Th 0 . 26 , however, GAMMA/sub Ce/ less than GAMMA/sub Ce-Th/. The various lattice dynamical and magnetic similarities among γ-Ce, CeSn 3 , and Ce 0 . 74 Th 0 . 26 are mixed valence compounds. Therefore, a complete theoretical description of the observed properties of Ce and its compounds may provide a basis for understanding a whole class of mixed valence materials

OFF-GAS ANALYSIS RESULTS AND FINE PORE RETROFIT CASE HISTORY FOR HARTFORD, CONNECTICUT

Science.gov (United States)

In the summer of 1982, the Hartford Metropolitan District Commission, Hartford County, Connecticut, Water Pollution Control Facility underwent a retrofit form a spiral roll coarse bubble to a full floor coverage fine pore aeration system. Work performed included all new in-tank ...

Dopant concentration dependence of radiation-induced positive hysteresis of Ce:GSO and Ce:GSOZ

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Watanabe, Kenichi

2014-01-01

Positive hysteresis and radiation tolerance to high-dose radiation exposure were investigated for Ce 0.5, 1, and 1.5%-doped Gd 2 SiO 5 (GSO) and for Zr co-doped GSO with the same Ce concentrations (GSOZ). When they were irradiated by 200–800 Gy 60 Co in 200 Gy steps, all Ce-doped GSO samples exhibited light yield enhancement (positive hysteresis). On the other hand, the light yield of GSOZ decreased greatly. Ce 0.5%-doped GSO showed the highest positive hysteresis, with ∼20% light yield enhancement. When the Ce concentration was increased, the positive hysteresis became weaker. - Highlights: • Positive hysteresis Ce 0.5, 1, and 1.5% doped GSO and GSOZ are studied. • Ce 0.5, 1, and 1.5% doped GSO show the positive hysteresis by 2–8 M rad 60 Co irradiation. • Ce 0.5, 1, and 1.5% doped GSOZ do not show the positive hysteresis. • By Zn co-doping, radiation tolerance of GSO becomes weaker. • By dense Ce doping, radiation tolerance of GSO and GSOZ are improved

Tuning Ce distribution for high performanced Nd-Ce-Fe-B sintered magnets

Energy Technology Data Exchange (ETDEWEB)

Fan, Xiaodong [School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048 (China); Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Science, Ningbo 315201 (China); Guo, Shuai; Chen, Kan; Chen, Renjie; Lee, Don [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Science, Ningbo 315201 (China); You, Caiyin, E-mail: caiyinyou@xaut.edu.cn [School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048 (China); Yan, Aru, E-mail: aruyan@nimte.ac.cn [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Science, Ningbo 315201 (China)

2016-12-01

A dual-alloy method was applied to tune the distribution of Ce for enhancing the performance of Nd-Ce-Fe-B sintered magnets with a nominal composition of (Nd{sub 0.75}Ce{sub 0.25}){sub 30.5}Fe{sub bal}Al{sub 0.1}Cu{sub 0.1}B. In comparison to the single alloy of (Nd{sub 0.75}Ce{sub 0.25}){sub 30.5}Fe{sub bal}Al{sub 0.1}Cu{sub 0.1}B, the coercivity was enhanced from 10.3 kOe to 12.1 kOe and the remanence was increased from 13.1 kG to 13.3 kG for the magnets with a dual-alloy method. In addition, the remanence temperature coefficient α and coercivity temperature coefficient β were also slightly improved for the magnet with the dual alloys. The results of microstructure characterizations show the uniform distribution of Ce for the magnet with a single alloy, and the coexistence of the Ce-rich and Ce-lean regions for the magnet with the dual alloys. In combinations with the nucleation of reversal domains and magnetic recoil curves, the property enhancement of magnets with a dual-alloy method was well explained. - Highlights: • Improved magnetic properties were obtained in dual-alloy magnet. • This is due to the tuning of Ce distribution and the change in microstructure. • The magnetic hardening effect can be observed in dual-alloy magnet.

78 FR 6819 - Patient Safety Organizations: Voluntary Relinquishment From The Connecticut Hospital Association...

Science.gov (United States)

2013-01-31

... Organizations: Voluntary Relinquishment From The Connecticut Hospital Association Federal Patient Safety Organization AGENCY: Agency for Healthcare Research and Quality (AHRQ), HHS. ACTION: Notice of delisting..., 42 U.S.C. 299b-21--b-26, provides for the formation of Patient Safety Organizations (PSOs), which...

Fabrication of Nano-CeO2 and Application of Nano-CeO2 in Fe Matrix Composites

International Nuclear Information System (INIS)

Tiebao, W.; Chunxiang, C.; Xiaodong, W.; Guobin, L.

2010-01-01

It is expatiated that nano-CeO2 is fabricated by the direct sedimentation method. The components and particles diameter of nano-CeO2 powders are analyzed by XRD and SEM . The thermodynamic analysis and acting mechanism of nano-CeO2 with Al in Fe matrix composites are researched, which shows that the reaction is generated between CeO2 and Al in the composite, that is, 3CeO2+4Al - 2Al2O3+3[Ce], which obtains Al2O3 and active [Ce] during the sintering process. The active [Ce] can improve the performance of CeO2/Fe matrix composites. The suitable amount of CeO2 is about 0.05% in CeO2/Fe matrix composites. SEM fracture analysis shows that the toughness sockets in nano-CeO2/Fe matrix composites are more than those in no-added nano-CeO2 composites, which can explain that adding nano-CeO2 into Fe matrix composite, the toughness of the composite is improved significantly. Applied nano-CeO2 to Fe matrix diamond saw blades shows that Fe matrix diamond saw blade is sharper and of longer cutting life than that with no-added nano-CeO2.

National Uranium Resource Evaluation: Providence Quadrangle, Connecticut, Rhode Island, and Massachusetts

International Nuclear Information System (INIS)

Zollinger, R.C.; Blauvelt, R.P.; Chew, R.T. III.

1982-09-01

The Providence Quadrangle, Connecticut, Rhode Island, and Massachusetts, was evaluated to a depth of 1500 m to identify environments and delineate areas favorable for uranium deposits. Criteria for this evaluation were developed by the National Uranium Resource Evaluation program. Environments were recognized after literature research, surface and subsurface geologic reconnaissance, and examination of known uranium occurrences and aeroradioactivity anomalies. Environments favorable for authigenic uranium deposits were found in the Quincy and Cowesett Granites. An environment favorable for contact-metasomatic deposits is in and around the borders of the Narragansett Pier Granite where it intrudes the Pennsylvanian sediments of the Narragansett Basin. An environment favorable for authigenic deposits in metamorphic rocks is in a migmatite on the eastern edge of the Scituate Granite Gneiss batholith. Environments favorable for contact-metasomatic deposits occur at the contacts between many of the granitic rocks and metamorphic rocks of the Blackstone Series. Results of this study also indicate environments favorable for sandstone-type uranium deposits are present in the rocks of the Narragansett Basin. Environments unfavorable for uranium deposits in the quadrangle include all granites not classified as favorable and the metamorphic rocks of eastern Connecticut. Glacial deposits and Cretaceous-Tertiary sediments remain unevaluated

78 FR 54962 - Approval and Promulgation of Air Quality Implementation Plans; Connecticut; NOX

Science.gov (United States)

2013-09-09

..., Suite 100, (OEP05-2), Boston, MA 02109-3912, phone number (617) 918-1657, fax number (617) 918-0657... of Mental Health and Addiction Services. 8111 Modification Uniroyal Chemical.. Naugatuck. 8118... Modification No. 1 issued to State of Connecticut Department of Mental Health and Addiction Services in...

Trace elements and radionuclides in the Connecticut River and Amazon River estuary

International Nuclear Information System (INIS)

Dion, E.P.

1983-01-01

The Connecticut River, its estuary and the Amazon River plume were studied to elucidate processes which control the flux of nuclides to the sea. Major ions (Ca, Mg, Na, Cl, Bicarbonate) and selected trace elements (Ra, Ba, Cu, Si) are introduced to the Connecticut River in proportion to the total dissolved load of various groundwaters. Si, Ra, and Ba are subject to removal from solution by seasonal diatom productivity; whereas the other groundwater-derived elements are found in proportion to TDS both time and space. These nuclides are released in the estuary when a portion of the Ra, Ba, and Si in riverine biogenic detritus is trapped in salt marshes and coves bordering the estuary where it redissolves and is exported to the main river channel at ebb tide. In the Amazon River estuary, the Ra and Ba are released in mid-salinity waters. Ra and Ba together with Si are subsequently removed by diatom productivity as reflected in increased Ra and Ba in the suspended particles and depleted dissolved nuclide concentrations in samples from the high productivity zone. In both the Connecticut River system and the Amazon River plume, Cu behaves conservatively; whereas the fates of Fe and Al are linked to soil-derived humic acids. Trace elements in Amazon plume sediments are found simply in proportion to the percentage of fine-grained size materials, despite low Th-228/Ra-228 mean residence times in the plume and the presence of Cs-137 in the sediment column. Estimates of the total flux of nuclides to the oceans can best be calculated on a mass balance basis using groundwater inputs. Unless significant repositories for nuclides exist in the river-estuarine system, the groundwater flux of dissolved nuclides is net flux to the ocean despite the reactions which occur in both rivers and estuaries

Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Second Evaluation Report and Appendices

Energy Technology Data Exchange (ETDEWEB)

Chandler, K.; Eudy, L.

2009-05-01

This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The evaluation period in this report (January 2008 through February 2009) has been chosen to coincide with a UTC Power propulsion system changeout that occurred on January 15, 2008.

78 FR 31459 - Approval and Promulgation of Air Quality Implementation Plans; Connecticut; Reasonably Available...

Science.gov (United States)

2013-05-24

... equipment is required to control VOC emissions by one of the following methods: Use of an enclosed gun... keeping; air pollution control equipment requirements; surface preparation requirements; and spray gun... and Promulgation of Air Quality Implementation Plans; Connecticut; Reasonably Available Control...

Biological reduction-deposition and luminescent properties of nanostructured CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Yu, Xiaoniu [School of Materials Science and Engineering, Southeast University, Nanjing 211189 (China); Research Institute of Green Construction Materials, Southeast University, Nanjing 211189 (China); Qian, Chunxiang, E-mail: cxqian@seu.edu.cn [School of Materials Science and Engineering, Southeast University, Nanjing 211189 (China); Research Institute of Green Construction Materials, Southeast University, Nanjing 211189 (China)

2016-03-01

Nano-sized CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} with hexagonal phase have been prepared by simply varying the reactant P/Ce molar ratio in bacterial liquid. The phase composition of two samples was checked via Fourier transform infrared spectroscopy (FTIR), energy dispersive analysis of X-rays (EDS) and X-ray diffraction (XRD) analyses, displaying the presence of CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} with average crystallite size are 32.34 and 15.61 nm, respectively. The scanning electron microscopy (SEM) images show that nano-clusters and sphere-like in shape with a narrow diameter distribution were observed in two samples. The transmission electron microscopy (TEM) photographs further indicate obtained CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} nanoparticles correspond to nanosheets and nanorods, respectively. The emission spectra of CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} display a broad band of 300–380 nm range with the strongest emission at 342 nm in the violet region. - Highlights: • A new method was found to synthesize CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} nanoparticles. • CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) nanoparticles have good luminescent properties. • Size and luminescent properties of two samples have been studied and compared.

Providing Flood Risk Science for Resilient Transportation Infrastructure Decisions in Connecticut

Science.gov (United States)

French, R.; Cifuentes-Lorenzen, A.; Kooris, D.; O'Donnell, J.

2017-12-01

The Connecticut Institute for Resilience and Climate Adaptation (CIRCA) provides actionable science to accelerate adaptation and resilience strategies for Connecticut's inland and coastal waterways communities. Connecticut's coastal area has some of the most valuable real estate in the United States due to the Metro North and Shoreline East commuter rail line that connects all 24 coastal municipalities through transit hubs to the New York City metropolitan region. On its way to NY, the rail runs through neighborhoods and coastal marshes and crosses local and state roads. During coastal storms and increasingly at high tides as the sea level rises, the rail line may act like a berm, but also cuts off coastal neighborhoods from the upland. When it crosses a road in a marsh setting, the clearance restriction also severely limits communities' options for moving or elevating the roadway. These flooded roadways and vulnerable transit hubs are already a challenge for municipalities and will continue to be in the future. However, given scarce resources, it is not sufficient to simply know that they are vulnerable using existing low resolution mapping tools. Communities need site-specific, exact estimates of frequency of flooding, incorporating future sea level rise, to make cost determinations and accurately project the useful life of their investment. To address this need CIRCA developed high-resolution dynamic coastal flood risk models and partnered with municipal staff, regional planning bodies and the state to apply them to infrastructure decision-making. We will present three case studies of this approach: 1) the implementation of the US HUD National Disaster Resilience Competition pilot project of road elevation and berm construction in partnership with the Department of Housing and the City of Bridgeport; 2) the City of New London's first rail and ferry transit hub vulnerability assessment for sea level rise and storms and 3) the flooding frequency of a state road

Prevalence of agglutinating antibodies to Toxoplasma gondii in striped skunks (Mephitis mephitis), opossums (Didelphis virginiana), and raccoons (Procyon lotor) from Connecticut

OpenAIRE

Mitchell, S. M.; Richardson, D. J.; Lindsay, D. S.

2006-01-01

The prevalence of agglutinating antibodies to Toxoplasma gondii was examined in striped skunks (Mephitis mephitis), opossums (Didelphis virginiana), and raccoons (Procyon lotor) from 8 cities in Connecticut. Ten (42%) of the 24 striped skunks, 2 of 7 (29%) opossums, and 12 of 12 (100%) raccoons were positive at dilutions of 1:50 or greater. These results suggest that T. gondii is prevalent in the environment, or prey items, or both, of these omnivores in Connecticut.

Prevalence of agglutinating antibodies to Toxoplasma gondii in striped skunks (Mephitis mephitis), opossums (Didelphis virginiana), and raccoons (Procyon lotor) from Connecticut.

Science.gov (United States)

Mitchell, Sheila M; Richardson, Dennis J; Lindsay, David S

2006-06-01

The prevalence of agglutinating antibodies to Toxoplasma gondii was examined in striped skunks (Mephitis mephitis), opossums (Didelphis virginiana), and raccoons (Procyon lotor) from 8 cities in Connecticut. Ten (42%) of the 24 striped skunks, 2 of 7 (29%) opossums, and 12 of 12 (100%) raccoons were positive at dilutions of 1:50 or greater. These results suggest that T. gondii is prevalent in the environment, or prey items, or both, of these omnivores in Connecticut.

Taking the Plunge: Next Steps in Engaged Learning: Project Kaleidoscope-Connecticut Conference of Independent Colleges Conference for Science Educators.

Science.gov (United States)

Frederick, Jennifer

2010-09-01

College and university science educators from across Connecticut gathered at Yale's West Campus in April 2010 for a Project Kaleidoscope (PKAL) program entitled "Taking the Plunge: Next Steps in Engaged Learning." Funded by the National Science Foundation (NSF) and co-sponsored by the Connecticut Conference of Independent Colleges (CCIC) and Yale's McDougal Graduate Teaching Center, the event was the latest in a PKAL series of one-day conferences aimed at equipping science, technology, engineering, and math (STEM) instructors with effective approaches to engaging students and training future scientists.

Modeling Waves and Coastal Flooding along the Connecticut Coast

Science.gov (United States)

Cifuentes-Lorenzen, A.; Howard-Strobel, M. M.; Fake, T.; McCardell, G.; O'Donnell, J.; Asthita, M.

2015-12-01

We have used a hydrodynamic- wave coupled numerical model (FVCOM-SWAVE) to simulate flooding at the Connecticut coastline during severe storms. The model employed a one-way nesting scheme and an unstructured grid. The parent domain spanned most of the southern New England shelf and the fine resolution grid covered Long Island Sound (LIS) and extended across the Connecticut coast to the 10m elevation contour. The model results for sea level, current and wave statistics from the parent grid have been tested with data from several field campaigns at different locations spanning the western, central and eastern portions of LIS. Waves are fetch limited and improvements to the model-data comparison required modifications to spectral coefficients in the wave model. Finally, the nested results were validated with two field campaigns in shallow water environments (i.e. New Haven and Old Saybrook). To assess the spatial variability of storm wave characteristics the domain was forced with the hindcast winds obtained from meteorological models (NAM and WRF) for 13 severe weather events that affected LIS in the past 15 years. We have also forced the system with a simulation of Superstorm Sandy in a warmer climate to assess the impact a climate change on the character of flooding. The nested grid is currently being used to map flooding risks under severe weather events including the effects of precipitation on river flow and discharge.

Comment on “Synthesis of ceria (CeO{sub 2} and CeO{sub 2−x}) nanoparticles via decarbonation and Ce(III) oxidation of synthetic bastnaesite (CeCO{sub 3}F)” by Montes-Hernandez et al

Energy Technology Data Exchange (ETDEWEB)

Gysi, Alexander P., E-mail: agysi@mines.edu [Department of Geology and Geological Engineering, Colorado School of Mines, 1516 Illinois Street, Golden, CO, 80401 (United States); Williams-Jones, Anthony E. [Department of Earth and Planetary Sciences, McGill University, 3450 University Street, Montreal, QC, Canada, H3A 2A7 (Canada)

2016-11-01

Montes-Hernandez et al. [5] recently reported results of a study of the decarbonation of fine-grained synthetic bastnäsite-(Ce) precipitates involving the oxidation of Ce(III) to Ce(IV) and the formation of ceria (CeO{sub 2} and CeO{sub 2-x} with oxygen vacancies) nano-particles. The purpose of their study was to show that oxidation of Ce(III) to Ce(IV) occurs spontaneously during heating of bastnäsite-(Ce) in air, a vacuum, N{sub 2} or Ar gas. However, their interpretation of the formation of CeO{sub 2} is not supported by the findings of Gysi and Williams-Jones [3], who showed that natural bastnäsite-(Ce) decomposes to form rare earth element (REE) oxyfluorides (REEOF). The latter was documented using differential scanning calorimetric (DSC) and thermogravimetric (TGA) experiments under a deoxygenated N{sub 2} atmosphere. In their experiments, Gysi and Williams-Jones [3] found no evidence for the oxidation of Ce(III) to Ce(IV). This raises the question of whether the experiments of Montes-Hernandez et al. [5] in a N{sub 2} atmosphere (and by extension in an Ar atmosphere) were compromised because of contamination by O{sub 2} and that, as a result, they reached the erroneous conclusion that Ce(III) oxidizes spontaneously to Ce(IV) during heating of bastnäsite-(Ce) under these conditions. In order to explain the disagreement between their findings and those of Gysi and Williams-Jones [3], Montes-Hernandez et al. [5], proposed that the X-ray diffraction data of the former study were incorrectly interpreted. Here, we provide further evidence that the natural bastnäsite-(Ce) employed in the study by Gysi and Williams-Jones [3] decomposed to form REE oxyfluorides (i.e., CeOF, LaOF, PrOF and NdOF) and not CeO{sub 2}, and supply explanations for why Montes-Hernandez et al. [5] erroneously concluded that CeO{sub 2} is produced during decomposition of this mineral under N{sub 2} and Ar atmospheres. In so doing, we hope to provide new insights into the decomposition of

Magnetic and electronic properties in CeTSi3 and CeTGe3 (T: transition metal)

International Nuclear Information System (INIS)

Shimoda, T.; Okuda, Y.; Takeda, Y.; Ida, Y.; Miyauchi, Y.; Kawai, T.; Fujie, T.; Sugitani, I.; Thamizhavel, A.; Matsuda, T.D.; Haga, Y.; Takeuchi, T.; Nakashima, M.; Settai, R.; Onuki, Y.

2007-01-01

We investigated the magnetic properties of CeTSi 3 (T: Ru, Os, Co, Rh, Ir, Pd and Pt) and CeTGe 3 (T: Co, Rh and Ir) by measuring their electrical resistivity and magnetic susceptibility. CeRuSi 3 , CeOsSi 3 and CeCoSi 3 do not order magnetically, with a large Kondo temperature of about 200K. The other compounds order antiferromagnetically, and are very similar to each other in their magnetic and electronic properties, which is related to a large crystalline electric field (CEF) splitting energy of the 4f electron, about 500K in CeIrSi 3

Structural and magnetic properties of Ce/Fe and Ce/FeCoV multilayers

Energy Technology Data Exchange (ETDEWEB)

Tixier, S; Boeni, P [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Mannix, D; Stirling, W G [Liverpool Univ. (United Kingdom); Lander, G H

1997-09-01

Ce/Fe and Ce/FeCoV multilayers have been grown by magnetron sputtering. The interfaces are well defined and the layers are crystalline down to an individual layer thickness of 20 A. Ce/FeCoV multilayers show sharper interfaces than Ce/Fe but some loss of crystallinity is observed. Hysteresis loops obtained by SQUID show different behaviour of the bulk magnetisation as a function of the layer thickness. Fe moments are found by Moessbauer spectroscopy to be perpendicular to the interfaces for multilayers with small periodicity. (author) 2 figs., 2 refs.

Inhibition of human carboxylesterases hCE1 and hiCE by cholinesterase inhibitors.

Science.gov (United States)

Tsurkan, Lyudmila G; Hatfield, M Jason; Edwards, Carol C; Hyatt, Janice L; Potter, Philip M

2013-03-25

Carboxylesterases (CEs) are ubiquitously expressed proteins that are responsible for the detoxification of xenobiotics. They tend to be expressed in tissues likely to be exposed to such agents (e.g., lung and gut epithelia, liver) and can hydrolyze numerous agents, including many clinically used drugs. Due to the considerable structural similarity between cholinesterases (ChE) and CEs, we have assessed the ability of a series of ChE inhibitors to modulate the activity of the human liver (hCE1) and the human intestinal CE (hiCE) isoforms. We observed inhibition of hCE1 and hiCE by carbamate-containing small molecules, including those used for the treatment of Alzheimer's disease. For example, rivastigmine resulted in greater than 95% inhibition of hiCE that was irreversible under the conditions used. Hence, the administration of esterified drugs, in combination with these carbamates, may inadvertently result in decreased hydrolysis of the former, thereby limiting their efficacy. Therefore drug:drug interactions should be carefully evaluated in individuals receiving ChE inhibitors. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

2010 U.S. Department of Agriculture- Natural Resources Conservation Service (USDA-NRCS) Topographic Lidar: Eastern Connecticut

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Earth Eye collected LiDAR data for approximately 4,589 square kilometers that partially cover the Connecticut counties of Hartford, Tolland, Windham, Middlesex and...

Predictors of Nutrition Quality in Early Child Education Settings in Connecticut.

Science.gov (United States)

Andreyeva, Tatiana; Kenney, Erica L; O'Connell, Meghan; Sun, Xiaohan; Henderson, Kathryn E

2018-05-01

This study assessed the dietary quality of lunches and feeding practices (family-style service, teacher role modeling) in Connecticut child care centers and made comparisons by center participation in the federal Child and Adult Care Food Program (CACFP). Plate waste methods and visual observation of lunches served and consumed. A total of 97 randomly selected licensed Connecticut child care centers (53 CACFP and 44 non-CACFP). A total of 838 preschool-aged children. Total energy intake, macronutrient intake, and intake by CACFP meal component as well as use of family-style dining, management of additional helpings, and whether and what teachers consumed in view of children. Child dietary intake at lunch was compared with dietary and CACFP recommendations using a mixed linear regression model. The CACFP centers were more likely to offer family-style service and have staff eat the same foods as the children. Children in non-CACFP centers consumed more saturated fat (4.1 vs 2.7 g; P feeding practices in child care settings require further exploration in the context of serving children at risk for food insecurity and in light of recent work on responsive feeding. Copyright © 2018 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Ce(III)/Ce(IV) in methanesulfonic acid as the positive half cell of a redox flow battery

International Nuclear Information System (INIS)

Leung, P.K.; Ponce de Leon, C.; Low, C.T.J.; Walsh, F.C.

2011-01-01

The characteristics of the Ce(III)/Ce(IV) redox couple in methanesulfonic acid were studied at a platinum disk electrode (0.125 cm 2 ) over a wide range of electrolyte compositions and temperatures: cerium (III) methanesulfonate (0.1-1.2 mol dm -3 ), methanesulfonic acid (0.1-5.0 mol dm -3 ) and electrolyte temperatures (295-333 K). The cyclic voltammetry experiments indicated that the diffusion coefficient of Ce(III) ions was 0.5 x 10 -6 cm 2 s -1 and that the electrochemical kinetics for the oxidation of Ce(III) and the reduction of Ce(IV) was slow. The reversibility of the redox reaction depended on the electrolyte composition and improved at higher electrolyte temperatures. At higher methanesulfonic acid concentrations, the degree of oxygen evolution decreased by up to 50% when the acid concentration increased from 2 to 5 mol dm -3 . The oxidation of Ce(III) and reduction of Ce(IV) were also investigated during a constant current batch electrolysis in a parallel plate zinc-cerium flow cell with a 3-dimensional platinised titanium mesh electrode. The current efficiencies over 4.5 h of the process Ce(III) to Ce(IV) and 3.3 h electrolysis of the reverse reaction Ce(IV) to Ce(III) were 94.0 and 97.6%, respectively. With a 2-dimensional, planar platinised titanium electrode (9 cm 2 area), the redox reaction of the Ce(III)/Ce(IV) system was under mass-transport control, while the reaction on the 3-dimensional mesh electrode was initially under charge-transfer control but became mass-transport controlled after 2.5-3 h of electrolysis. The effect of the side reactions (hydrogen and oxygen evolution) on the current efficiencies and the conversion of Ce(III) and Ce(IV) are discussed.

Modeling effects of traffic and landscape characteristics on ambient nitrogen dioxide levels in Connecticut

Science.gov (United States)

Skene, Katherine J.; Gent, Janneane F.; McKay, Lisa A.; Belanger, Kathleen; Leaderer, Brian P.; Holford, Theodore R.

2010-12-01

An integrated exposure model was developed that estimates nitrogen dioxide (NO 2) concentration at residences using geographic information systems (GIS) and variables derived within residential buffers representing traffic volume and landscape characteristics including land use, population density and elevation. Multiple measurements of NO 2 taken outside of 985 residences in Connecticut were used to develop the model. A second set of 120 outdoor NO 2 measurements as well as cross-validation were used to validate the model. The model suggests that approximately 67% of the variation in NO 2 levels can be explained by: traffic and land use primarily within 2 km of a residence; population density; elevation; and time of year. Potential benefits of this model for health effects research include improved spatial estimations of traffic-related pollutant exposure and reduced need for extensive pollutant measurements. The model, which could be calibrated and applied in areas other than Connecticut, has importance as a tool for exposure estimation in epidemiological studies of traffic-related air pollution.

Connecticut Professional School Counselors: College and Career Counseling Services and Smaller Ratios Benefit Students

Science.gov (United States)

Lapan, Richard T.; Whitcomb, Sara A.; Aleman, Nancy M.

2012-01-01

Results connect the implementation of the college and career counseling components of a comprehensive school counseling program and lower student-to-school-counselor ratios to a reduction in suspension rates and disciplinary incidents for Connecticut high school students. Principal ratings of college and career counseling services provided in…

77 FR 32898 - Safety & Security Zones; OPSAIL 2012 Connecticut, Thames River, New London, CT

Science.gov (United States)

2012-06-04

... 1625-AA00; AA87 Safety & Security Zones; OPSAIL 2012 Connecticut, Thames River, New London, CT AGENCY... 20, 2012 the Coast Guard published a notice of proposed rulemaking entitled Safety & Security Zones... Homeland Security Delegation No. 0170.1, which collectively authorize the Coast Guard to define safety and...

77 FR 776 - Agenda and Notice of Public Meeting of the Connecticut Advisory Committee

Science.gov (United States)

2012-01-06

.... Commission on Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that a planning... convene at 12:00 noon (EST) Friday, January 13, 2012. The purpose of the planning meeting is to work to... COMMISSION ON CIVIL RIGHTS Agenda and Notice of Public Meeting of the Connecticut Advisory...

Selection of candidate sites for a LLRW disposal facility in Connecticut

International Nuclear Information System (INIS)

Gingerich, Ronald E.; Holeman, George R.; Hileman, James A.

1992-01-01

Connecticut, one of the two members of the Northeast Interstate Low-Level Radioactive Waste Management Compact, has been directed by the Compact Commission to site a facility to manage the low-level radioactive waste (LLRW) generated in Connecticut. The Connecticut Hazardous Waste Management Service (CHWMS) has been given the responsibility to identify a site in the state for a LLRW disposal facility. The CHWMS has decided to plan for a site with an operating life of 50 years. A site of at least 160 acres will be needed to accommodate (he expected volume of LLRW and meet state and federal site requirements. A Site Selection Plan establishing the process and criteria to be used in siting a facility was adopted by the CHWMS in November 1990. The Plan calls for a stepwise screening of the state using published data to identify three candidate sites. A preferred site will be selected from among the candidate sites using onsite testing. The site selection criteria, which closely follow state and federal statutory and regulatory requirements, are divided into three types: exclusionary, avoidance and preference. Battelle Memorial Institute was selected as the contractor to assist the CHWMS in site screening. With guidance from the CHWMS, Battelle undertook screening of the state by applying the exclusionary, avoidance and preference criteria in three steps to identify from eight to twelve potential sites. The CHWMS Board of Directors bad decided that it wanted to be closely involved in the selection of the three candidate sites and to do so in a way that precluded the political and parochial pressures that are inevitably associated with a siting process. To meet these two goals a geographically neutral approach was devised for candidate site selection. In June, 1991 the CHWMS, with assistance from Battelle, conducted a three day workshop, open to the public, in which eight sites were presented to the Board. Data on the sites were presented in a way that did not disclose

Different magnetic behaviour of the Kondo compounds Al3Ce and Al11Ce3

International Nuclear Information System (INIS)

Benoit, A.; Flouquet, J.; Palleau, J.; Buevoz, J.L.

1979-08-01

Neutron diffraction experiments on the Al 3 Ce and Al 11 Ce 3 compounds have been performed on the multidetector of the I.L.L. high flux reactor. No magnetic structure has been detected on the Al 3 Ce compound down to 20 mK. This confirms the non magnetic ground state of Al 3 Ce. For Al 11 Ce 3 , two magnetic structures have been observed: a ferromagnetic one at 4.2 K and an antiferromagnetic one at 2 K. The antiferromagnetic structure, which corresponds to a propagation vector (0,0,1/3), implies a strong reduction of the magnetic moment of determined sites; this reflects the Kondo character of the compounds

Comparison of Spectral and Scintillation Properties of LuAP:Ce and LuAP:Ce,Sc Single Crystals

Science.gov (United States)

Petrosyan, Ashot G.; Derdzyan, Marina; Ovanesyan, Karine; Shirinyan, Grigori; Lecoq, Paul; Auffray, Etiennette; Kronberger, Matthias; Frisch, Benjamin; Pedrini, Christian; Dujardin, Christophe

2009-10-01

Scintillation properties of LuAP:Ce and LuAP:Ce,Sc crystal series were studied under excitation by gamma-rays from a 137Cs source. Both series demonstrated comparable optical quality in terms of underlying absorption at 260 nm, slope of the optical edge and transmission in the range of emission. The light yield of LuAP:Ce crystals measured in 0.2 cm times 0.2 cm times 0.8 cm pixels increases linearly with the Ce concentration reaching at 0.58 at. % 6448 plusmn 322 ph/MeV and 9911 plusmn 496 ph/MeV in the long and in the short directions respectively (the light yield ratio is 65%) and shows no sign of light saturation. The energy resolution is found to depend, among other factors, on the uniformity of Ce concentration within the pixels and is improved to 7.1 plusmn 0.4% (I = 0.2 cm), 9.5 plusmn 0.5% (I = 0.8 cm). Intentional co-doping with Sc + ions was tested and resulted in increase of the Ce distribution coefficient to about 0.3. This enabled to increase the concentration of Ce in LuAP:Ce,Sc crystals up to 0.7 at. %, while conserving high optical quality. In contrast to LuAP:Ce, the light yield in LuAP:Ce,Sc crystals does not increase with Ce concentration, the photo peak being gradually suppressed. The involved mechanisms are discussed basing on measurements of the unit cell volumes, Ce concentration uniformity, x-ray rocking spectra, absorption spectra of pure and variously doped LuAP crystals, and emission spectra under different excitations.

Northern range expansion of the Asian tiger mosquito (Aedes albopictus): Analysis of mosquito data from Connecticut, USA.

Science.gov (United States)

Armstrong, Philip M; Andreadis, Theodore G; Shepard, John J; Thomas, Michael C

2017-05-01

The Asian tiger mosquito (Aedes albopictus) is an invasive species and important arbovirus vector that was introduced into the U.S. in the 1980's where it continues to expand its range. Winter temperature is an important constraint to its northward expansion, with potential range limits located between the 0° and -5°C mean cold month isotherm. Connecticut is located within this climatic zone and therefore, Ae. albopictus was monitored statewide to assess its northern range expansion and to delineate where populations can stably persist. Ae. albopictus females were monitored at fixed trapping sites throughout Connecticut from June-October over a 20-year period, 1997-2016. In addition, Ae. albopictus larvae and pupae were collected from tire habitats and tires were retrieved from the field in the spring and flooded to evaluate overwintering success of hatching larvae. Ae. albopictus was first detected during statewide surveillance when a single adult female was collected in 2006. This species was not collected again until 2010 and was subsequently detected each successive year with increasing abundance and distribution except following the unusually cold winters of 2014 and 2015. Ae. albopictus mosquitoes were most abundant in urban and suburban locations along the southwestern shoreline of Connecticut; however, single specimens were occasionally detected in central parts of the state. Field-collected females were also screened for arbovirus infection yielding two isolations of Cache Valley virus and one isolation of West Nile virus, highlighting the threat posed by this mosquito. Ae. albopictus overwintered in Connecticut under mild winter conditions as shown by recovery of hatched larvae from field collected tires in spring and by early season detection of larvae and pupae. This study documents the establishment and expansion of Ae. albopictus at the northern boundary of its range in the northeastern U.S. and provides a baseline for monitoring the future spread

Northern range expansion of the Asian tiger mosquito (Aedes albopictus: Analysis of mosquito data from Connecticut, USA.

Directory of Open Access Journals (Sweden)

Philip M Armstrong

2017-05-01

Full Text Available The Asian tiger mosquito (Aedes albopictus is an invasive species and important arbovirus vector that was introduced into the U.S. in the 1980's where it continues to expand its range. Winter temperature is an important constraint to its northward expansion, with potential range limits located between the 0° and -5°C mean cold month isotherm. Connecticut is located within this climatic zone and therefore, Ae. albopictus was monitored statewide to assess its northern range expansion and to delineate where populations can stably persist.Ae. albopictus females were monitored at fixed trapping sites throughout Connecticut from June-October over a 20-year period, 1997-2016. In addition, Ae. albopictus larvae and pupae were collected from tire habitats and tires were retrieved from the field in the spring and flooded to evaluate overwintering success of hatching larvae. Ae. albopictus was first detected during statewide surveillance when a single adult female was collected in 2006. This species was not collected again until 2010 and was subsequently detected each successive year with increasing abundance and distribution except following the unusually cold winters of 2014 and 2015. Ae. albopictus mosquitoes were most abundant in urban and suburban locations along the southwestern shoreline of Connecticut; however, single specimens were occasionally detected in central parts of the state. Field-collected females were also screened for arbovirus infection yielding two isolations of Cache Valley virus and one isolation of West Nile virus, highlighting the threat posed by this mosquito. Ae. albopictus overwintered in Connecticut under mild winter conditions as shown by recovery of hatched larvae from field collected tires in spring and by early season detection of larvae and pupae.This study documents the establishment and expansion of Ae. albopictus at the northern boundary of its range in the northeastern U.S. and provides a baseline for monitoring

An assessment of hopanes in settled dust and air as indicators of exposure to traffic-related air pollution in Windsor, Ontario

Science.gov (United States)

Curran, Jason

Traffic-related air pollution (TRAP) has been linked with several adverse health effects. We investigated hopanes, markers of primary particle emissions from gasoline and diesel engines, in house dust as an alternative approach for assessing exposure to TRAP in Windsor, Ontario. Settled house dust was collected from the homes of 28 study participants (10 -- 13 yrs). The dust was then analyzed for a suite of hopanes by gas chromatography-mass spectrometry. We calculated correlations between dust hopane concentrations and estimates of annual average NO2 concentrations derived from an existing LUR model. Hopanes were consistently present in detectable quantities in house dust. Annual average outdoor NO2 estimated was moderately correlated with hopanes in house dust (r = 0.46; pefficiency or the presence of an attached garage. Hopanes measured in settled house dust show promise as an indicator of long-term exposure to traffic-related air pollution. Keywords: hopane; air pollution; traffic; dust; exposure; TRAP.

2011 U.S. Department of Agriculture- Natural Resources Conservation Service (USDA-NRCS) Topographic Lidar: North West Connecticut

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Earth Eye collected LiDAR data for approximately 1,703 square kilometers that partially cover the Connecticut counties of Litchfield and Fairfield. The nominal pulse...

CeO2-stabilized tetragonal ZrO2 polycrystals (Ce-TZP ceramics)

International Nuclear Information System (INIS)

Andrade Nono, M.C. de.

1990-12-01

This work presents the development and the characterization of CeO 2 -stabilized tetragonal ZrO 2 polycrystals (Ce-TZP ceramics), since it is considered candidate material for applications as structural high performance ceramics. Sintered ceramics were fabricated from mixtures of powders containing different CeO 2 content prepared by conventional and nonconventional techniques. These powders and their resultant sintered ceramics were specified by chemical and physical characterization, compactation state and mechanical properties. The chemical characteristics were determined by chemical analysis and the physical characteristics were evaluated by phase content, particle and agglomerate size and aspect, and powder porosity. (author)

Magnetic behaviour of new Ce compounds

Energy Technology Data Exchange (ETDEWEB)

Sampathkumaran, E V [Tata Inst. of Fundamental Research, Bombay (India); Mallik, R [Tata Inst. of Fundamental Research, Bombay (India)

1996-07-01

We report initial results of our investigation on the magnetic behaviour of some new Ce compounds. The compounds, CeIr{sub 2}B{sub 2}C and CeIr{sub 2}Ge{sub 2}, do not appear to exhibit bulk magnetic ordering down to 2 K. The alloys, Ce{sub 2}Pd{sub 2}In and Ce{sub 2}Cu{sub 2}In, order magnetically below 4 and 6 K, respectively, and a marginal change in the Pd(Cu)/In composition does not significantly influence the ordering temperatures. (orig.).

From cure to custodianship of the insane poor in nineteenth-century Connecticut.

Science.gov (United States)

Goodheart, Lawrence B

2010-01-01

Connecticut was the exception among the Northeastern and Middle Atlantic states in not founding a public institution for the insane until after the Civil War when it opened the Hospital for the Insane at Middletown in 1868, a facility previously neglected by scholars. The state had relied on the expedient of subsidizing the impoverished at the private Hartford Retreat for the Insane that overtaxed that institution and left hundreds untreated. Despite abundant evidence to the contrary, well meaning officials oversold the idea that the Middletown site would promote cures and be cost effective. A number of unanticipated consequences occurred that mirrored fundamental changes in nineteenth-century psychiatry. The new hospital swelled by 1900 to over 2,000 patients, the largest in New England. Custodianship at the monolithic hospital became the norm. The hegemony of monopoly capitalism legitimated the ruling idea that bigger institutions were better and was midwife to the birth of eugenic responses. Class based psychiatry--the few rich at the Retreat and the many poor at Middletown--was standard as it was in other aspects of the Gilded Age. Public policy toward the insane poor in Connecticut represents an outstanding example of the transition from antebellum romanticism to fin de siècle fatalism.

Optical and scintillation properties of Ce-doped LuLiF4 with different Ce concentrations

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Fukuda, Kentaro; Chani, Valery

2013-01-01

The crystals of 0.1, 0.5, and 1 mol% Ce-doped LuLiF 4 (Ce:LLF) grown by the micro-pulling down (μ-PD) method were examined for their optical and scintillation properties. Ce:LLF crystals had ∼80% transparency at wavelengths longer than 300 nm. In photoluminescence spectra, they demonstrated intense emission peaks at 310 and 330 nm with the quantum yield of 60–90%. Ce 3+ 5d–4f emission peaks were also detected at similar wavelengths of 310 and 330 nm in the radioluminescence spectra obtained under X-ray excitation. According to pulse height spectra recorded under γ-ray irradiation, the absolute light yield of Ce 0.1, 0.5, and 1% were 3600±400, 3000±300, and 1700±200 ph/MeV, respectively. Decay time kinetics was also inspected using a pulse X-ray equipped streak camera system. The decay time components of Ce:LLF were ∼70 ns and ∼1 μs for all the samples

Production of 139Ce by the 139La(p,n)139Ce reaction

International Nuclear Information System (INIS)

Ishioka, Noriko S.; Sekine, Toshiaki; Izumo, Mishiroku; Hashimoto, Kazuyuki; Kobayashi, Katsutoshi; Matsuoka, Hiromitsu

2002-01-01

To produce a carrier-free 139 Ce to be used as an efficiency-calibration source for Ge detectors, a target-preparation method and a chemical separation method were studied. It was found that commercially available powders of lanthanum-oxide and lanthanum metal are applicable to a target material in the nuclear reaction 139 La(p,n) 139 Ce. In the separation of 139 Ce from an irradiated lanthanum target, a solvent-extraction method and an ion-exchange method gave final products in good chemical purity. (author)

Effect of yttrium on electron–phonon coupling strength of 5d state of Ce3+ ion in LYSO:Ce crystals

International Nuclear Information System (INIS)

Ding, Dongzhou; Liu, Bo; Wu, Yuntao; Yang, Jianhua; Ren, Guohao; Chen, Junfeng

2014-01-01

This paper aims at an improved understanding of luminescence properties of (Lu 1−x Y x ) 2 SiO 5 :Ce (x=0 at%, 26 at%, 45 at%, 66 at% and 100 at%). Photoluminescence emission and excitation spectra as well as Raman spectra of (Lu 1−x Y x ) 2 SiO 5 :Ce were investigated as a function of yttrium (shortened as Y) content in it. Obtained Huang–Rhys factor S indicates that the coupling between Ce1 (7-oxygen-coordinated), Ce2 (6-oxygen-coordinated) and LYSO lattice is intermediate and strong, respectively. Besides, it was found that: with the increase of Y content, crystal field strength around Ce1 and Ce2 decreases, Stokes shift of Ce1 and Ce2 presents an increase trend, and S of Ce2 tends to decrease. These phenomena were explained by geometrical influence of Y 3+ /Lu 3+ on the crystal field splitting of the 5d levels of Ce 3+ and coupling strength. With the increase of Y content, the evolution of S and coupling energy ħω of Ce1 present a slight increase and decrease trend respectively, while S and coupling energy ħω of Ce2 present an obvious decrease and increase trend, respectively. - Highlights: • Crystal field strength around Ce1 decreases with increase of Y content in LYSO:Ce. • A diagram of Huang–Rhys factor S against Y content in LYSO:Ce was constructed. • A diagram of coupling energy ħω against Y content in LYSO:Ce was constructed. • A diagram of Stokes shift against Y content in LYSO:Ce was constructed

The Tab: How Connecticut Can Fix Its Dysfunctional Education Spending System to Reward Success, Incentivize Choice and Boost Student Achievement. A ConnCAN/Public Impact Research Report

Science.gov (United States)

Hassel, Bryan C.; Doyle, Daniela

2009-01-01

Thirty years ago, the Connecticut Supreme Court forced our state to take stock of its system for funding schools. Our poorest towns had thousands of dollars less per child to spend. Today, our poorest districts spend roughly the same as our richest, but Connecticut's poor children still score far below their wealthy peers. Our school finance…

Physico-chemical properties of (U,Ce)O2

International Nuclear Information System (INIS)

Yamada, K.; Yamanaka, S.; Katsura, M.

1998-01-01

The high-temperature X-ray diffraction analysis of (U,Ce)O 2 with CeO 2 contents ranging from 0 to 20 mol.% CeO 2 was performed to obtain the variation of the linear thermal expansion coefficient with the CeO 2 content. Ultrasonic pulse-echo measurements were also carried out from room temperature to 673 K to estimate the change in the mechanical properties of (U,Ce)O 2 with the CeO 2 content. The variation in the linear thermal expansion coefficient at the low CeO 2 content region is more steep than that expected from the linear thermal expansion coefficient of UO 2 and CeO 2 . The Young's and shear moduli of all (U,Ce)O 2 were found to decrease with rising temperature. This was due to the increase of the bond length accompanied by the thermal expansion. Although the lattice parameter decreased with CeO 2 content, the moduli of (U,Ce)O 2 were found to decrease with increasing CeO 2 content at room temperature. These results show that in the range from 0 to 20 mol.% of CeO 2 , as CeO 2 content increases, the bottom of the potential energy in (U,Ce)O 2 is shallower and broader. (orig.)

77 FR 27713 - Agenda and Notice of Public Meeting of the Connecticut Advisory Committee

Science.gov (United States)

2012-05-11

... meeting of the Connecticut State Advisory Committee will convene at 10:30 a.m. on Friday, May 25, 2012 at... office by Monday, June 25, 2012. Comments may be mailed to the Eastern Regional Office, U.S. Commission on Civil Rights, 624 9th Street NW., Suite 740, Washington, DC 20425, faxed to (202) 376-7548, or...

Preliminary Bedrock Geologic Map of the Old Lyme Quadrangle, New London and Middlesex Counties, Connecticut

Science.gov (United States)

Walsh, Gregory J.; Scott, Robert B.; Aleinikoff, John N.; Armstrong, Thomas R.

2006-01-01

This report presents a preliminary map of the bedrock geology of the Old Lyme quadrangle, New London and Middlesex Counties, Connecticut. The map depicts contacts of bedrock geologic units, faults, outcrops, and structural geologic information. The map was published as part of a study of fractured bedrock aquifers and regional tectonics.

Comparison between the Oxygen Reduction Reaction Activity of Pd₅Ce and Pt₅Ce

DEFF Research Database (Denmark)

Tripkovic, Vladimir; Zheng, Jian; Rizzi, Gian Andrea

2015-01-01

A set of electrochemical and X-ray spectroscopy measurements have been used conjointly with density functional theory (DFT) simulations to study the activity and stability of Pd5Ce for the oxygen reduction reaction. A polycrystalline Pd5Ce rod has been selected as a model catalyst to test if resu......-Pd5Ce is more facile, requires less atom rearrangement, than transformation from Pt5Ce to Pt3Ce, which might explain the kinetic stability of Pt5Ce at low temperatures....

Aerial Photography and Imagery, Ortho-Corrected, Leaf-on September 2004 0.5m resolution CIR orthoimagery that covers Connecticut's coastal communities. Data were collected by Earth Data, under contract to NOAA, using a Leica ADS40 sensor., Published in 2004, University of Connecticut.

Data.gov (United States)

NSGIC Education | GIS Inventory — Aerial Photography and Imagery, Ortho-Corrected dataset current as of 2004. Leaf-on September 2004 0.5m resolution CIR orthoimagery that covers Connecticut's coastal...

Aerial Photography and Imagery, Ortho-Corrected, Leaf-on September 2004 0.5m resolution RGB orthoimagery that covers Connecticut's coastal communities. Data were collected by Earth Data, under contract to NOAA, using a Leica ADS40 sensor., Published in 2004, University of Connecticut.

Data.gov (United States)

NSGIC Education | GIS Inventory — Aerial Photography and Imagery, Ortho-Corrected dataset current as of 2004. Leaf-on September 2004 0.5m resolution RGB orthoimagery that covers Connecticut's coastal...

Dependence of the Ce(iii)/Ce(iv) ratio on intracellular localization in ceria nanoparticles internalized by human cells

KAUST Repository

Ferraro, Daniela

2017-01-09

CeO2 nanoparticles (CNPs) have been investigated as promising antioxidant agents with significant activity in the therapy of diseases involving free radicals or oxidative stress. However, the exact mechanism responsible for CNP activity has not been completely elucidated. In particular, in situ evidence of modification of the oxidative state of CNPs in human cells and their evolution during cell internalization and subsequent intracellular distribution has never been presented. In this study we investigated modification of the Ce(iii)/Ce(iv) ratio following internalization in human cells by X-ray absorption near edge spectroscopy (XANES). From this analysis on cell pellets, we observed that CNPs incubated for 24 h showed a significant increase in Ce(iii). By coupling on individual cells synchrotron micro-X-ray fluorescence (μXRF) with micro-XANES (μXANES) we demonstrated that the Ce(iii)/Ce(iv) ratio is also dependent on CNP intracellular localization. The regions with the highest CNP concentrations, suggested to be endolysosomes by transmission electron microscopy, were characterized by Ce atoms in the Ce(iv) oxidation state, while a higher Ce(iii) content was observed in regions surrounding these areas. These observations suggest that the interaction of CNPs with cells involves a complex mechanism in which different cellular areas play different roles.

Dependence of the Ce(iii)/Ce(iv) ratio on intracellular localization in ceria nanoparticles internalized by human cells

KAUST Repository

Ferraro, Daniela; Tredici, Ilenia G.; Ghigna, Paolo; Castillio-Michel, Hiram; Falqui, Andrea; Di Benedetto, Cristiano; Alberti, Giancarla; Ricci, Vittorio; Anselmi-Tamburini, Umberto; Sommi, Patrizia

2017-01-01

CeO2 nanoparticles (CNPs) have been investigated as promising antioxidant agents with significant activity in the therapy of diseases involving free radicals or oxidative stress. However, the exact mechanism responsible for CNP activity has not been completely elucidated. In particular, in situ evidence of modification of the oxidative state of CNPs in human cells and their evolution during cell internalization and subsequent intracellular distribution has never been presented. In this study we investigated modification of the Ce(iii)/Ce(iv) ratio following internalization in human cells by X-ray absorption near edge spectroscopy (XANES). From this analysis on cell pellets, we observed that CNPs incubated for 24 h showed a significant increase in Ce(iii). By coupling on individual cells synchrotron micro-X-ray fluorescence (μXRF) with micro-XANES (μXANES) we demonstrated that the Ce(iii)/Ce(iv) ratio is also dependent on CNP intracellular localization. The regions with the highest CNP concentrations, suggested to be endolysosomes by transmission electron microscopy, were characterized by Ce atoms in the Ce(iv) oxidation state, while a higher Ce(iii) content was observed in regions surrounding these areas. These observations suggest that the interaction of CNPs with cells involves a complex mechanism in which different cellular areas play different roles.

Adduct formation in Ce(IV) thenolytrifluoroacetonate

International Nuclear Information System (INIS)

Anufrieva, S.I.; Polyakova, G.V.; Snezhko, N.I.; Pechurova, N.I.; Martynenko, L.I.; Spitsyn, V.I.

1982-01-01

The literature contains no information on adduct formation in Ce(IV) β-diketonates with additional ligands. Since tetrakis-β-diketonates of Ce(IV) have four six-membered chelate rings, we can suppose that the introduction of an additional monodentate or bidentate ligand into the coordination sphere of Ce(IV) β-diketonates would lead to an increase in the coordination number (CN) of the Ce(IV) to nine or ten. The possibility of realization of such a high CN for Ce(IV) has not been proved; a study of adduct formation by Ce(IV) tetrakis-β-diketonates is thus of theoretical interest. Such an investigation might also be of practical interest, because the introduction of an additional ligand into the coordination sphere of a rare-earth β-diketonate usually increases the solubility of the β-diketonate in nonpolar solvents and increases the volatility of the compound; such a modification of the properties is important for various practical purposes. The aim of our work was to study the possibility of separating solid adducts of Ce(IV) tetrakis-thenoyltrifluoroacetonate with certain oxygen-containing and nitrogen-containing donor monodentate and bidentate ligands, and also to investigate their properties. As the β-diketone we used thenoyltrifluoroacetone (HTTFA), since in a parallel investigation it was found that Ce(TTFA) 4 has a high oxidation-reduction stability

Peculiarities of the intermediate valence state of Ce in CeM2Si2 (M = Fe, Co, Ni) compounds

International Nuclear Information System (INIS)

Koterlyn, M.; Shcherba, I.; Yasnitskii, R.; Koterlyn, G.

2007-01-01

The results of thermoelectric power and the electrical resistivity measurements connected with the intermediate valence (IV) of Ce are presented for the compounds CeM 2 Si 2 (M = Fe, Co, Ni) in the temperature range of 4-800 K. It is shown that CeM 2 Si 2 are Kondo-lattices with the coherence scale T coh ∼ 60-80 K and the so-called single-site Kondo temperature T K ∼ 10 3 K. On the example of CeNi 2 Si 2 we have studied the changes in the structure of density of f states (f-DOS) near the Fermi energy caused by atomic substitutions. The results of structural, transport, magnetic, and Ce L III X-ray absorption spectra measurements in the series Ce 1-x La x Ni 2 Si 2 (0 ≤ x ≤ 0.6), Ce(Ni 1-y Cu y ) 2 Si 2 (0 ≤ y ≤ 0.6) and CeNi 2 (Si 1-z Ge z ) 2 (0 ≤ z ≤ 0.5) are presented. We found that the IV state of Ce in the CeM 2 Si 2 is an evidence of possible opening a wide pseudogap Δ ∼ kT K within the f-DOS structure slightly above the Fermi energy

Surface and bulk 4f-photoemission spectra of CeIn3 and CeSn3

International Nuclear Information System (INIS)

Kim, H.; Tjernberg, O.; Chiaia, G.; Kumigashira, H.; Takahashi, T.; Duo, L.; Sakai, O.; Kasaya, M.; Lindau, I.

1997-01-01

Resonant photoemission spectroscopy was performed on CeIn 3 and CeSn 3 at the 4d-4f and 3d-4f core thresholds. Using the different surface sensitivity between the two photon energies, surface and bulk 4f-photoemission spectra were derived for both compounds. With the noncrossing approximation of the Anderson impurity model, the 4d-4f resonant spectra together with the surface and bulk spectra were self-consistently analyzed to obtain the microscopic parameters such as the 4f-electron energy and the hybridization strength with conduction electrons. The result shows a substantial difference in these parameters between the surface and the bulk, indicating that it is important to take into account the surface effect in analyzing photoemission spectra of Ce compounds. It is also found that the 4f surface core-level shift is different between CeIn 3 and CeSn 3 . copyright 1997 The American Physical Society

Optical and scintillation properties of Ce-doped LuLiF{sub 4} with different Ce concentrations

Energy Technology Data Exchange (ETDEWEB)

Yanagida, Takayuki, E-mail: yanagida@lsse.kyutech.ac.jp [Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu-ku, Kitakyushu, Fukuoka 808-0196 (Japan); Fujimoto, Yutaka [Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu-ku, Kitakyushu, Fukuoka 808-0196 (Japan); Fukuda, Kentaro [Tokuyama Corporation, Shibuya 3-chome, Shibuya-ku, Tokyo 150-8383 Japan (Japan); Chani, Valery [Tohoku Univ., 2-1-1 Katahira, Sendai 980-8577 (Japan)

2013-11-21

The crystals of 0.1, 0.5, and 1 mol% Ce-doped LuLiF{sub 4} (Ce:LLF) grown by the micro-pulling down (μ-PD) method were examined for their optical and scintillation properties. Ce:LLF crystals had ∼80% transparency at wavelengths longer than 300 nm. In photoluminescence spectra, they demonstrated intense emission peaks at 310 and 330 nm with the quantum yield of 60–90%. Ce{sup 3+} 5d–4f emission peaks were also detected at similar wavelengths of 310 and 330 nm in the radioluminescence spectra obtained under X-ray excitation. According to pulse height spectra recorded under γ-ray irradiation, the absolute light yield of Ce 0.1, 0.5, and 1% were 3600±400, 3000±300, and 1700±200 ph/MeV, respectively. Decay time kinetics was also inspected using a pulse X-ray equipped streak camera system. The decay time components of Ce:LLF were ∼70 ns and ∼1 μs for all the samples.

The crystal structure of galgenbergite-(Ce), CaCe2(CO3)4•H2O

Science.gov (United States)

Walter, Franz; Bojar, Hans-Peter; Hollerer, Christine E.; Mereiter, Kurt

2013-04-01

Galgenbergite-(Ce) from the type locality, the railroad tunnel Galgenberg between Leoben and St. Michael, Styria, Austria, was investigated. There it occurs in small fissures of an albite-chlorite schist as very thin tabular crystals building rosette-shaped aggregates associated with siderite, ancylite-(Ce), pyrite and calcite. Electron microprobe analyses gave CaO 9.49, Ce2O3 28.95, La2O3 11.70, Nd2O3 11.86, Pr2O3 3.48, CO2 30.00, H2O 3.07, total 98.55 wt.%. CO2 and H2O calculated by stoichiometry. The empirical formula (based on Ca + REE ∑3.0) is C{{a}_{1.00 }}{{( {C{{e}_{1.04 }}L{{a}_{0.42 }}N{{d}_{0.42 }}P{{r}_{0.12 }}} )}_{2.00 }}{{( {C{{O}_3}} )}_4}\\cdot {{H}_2}O , and the simplified formula is CaC{{e}_2}{{( {C{{O}_3}} )}_4}\\cdot {{H}_2}O . According to X-ray single crystal diffraction galgenbergite-(Ce) is triclinic, space group Poverline{1},a=6.3916(5) , b = 6.4005(4), c = 12.3898(9) Å, α = 100.884(4), β = 96.525(4), γ = 100.492(4)°, V = 483.64(6) Å3, Z = 2. The eight strongest lines in the powder X-ray diffraction pattern are [ d calc in Å/( I)/ hkl]: 5.052/(100)/011; 3.011/(70)/0-22; 3.006/(66)/004; 5.899/(59)/-101; 3.900/(51)/1-12; 3.125/(46)/-201; 2.526/(42)/022; 4.694/(38)/-102. The infrared absorption spectrum reveals H2O (OH-stretching mode at 3,489 cm-1, HOH bending mode at 1,607 cm-1) and indicates the presence of distinctly non-equivalent CO3-groups by double and quadruple peaks of their ν1, ν2, ν3 and ν4 modes. The crystal structure of galgenbergite-(Ce) was refined with X-ray single crystal data to R1 = 0.019 for 2,448 unique reflections ( I > 2 σ( I)) and 193 parameters. The three cation sites of the structure Ca(1), Ce(2) and Ce(3) have a modest mixed site occupation by Ca and small amount of REE (Ce, La, Pr, Nd) and vice versa. The structure is based on double layers parallel to (001), which are composed of Ca(1)Ce(2)(CO3)2 single layers with an ordered chessboard like arrangement of Ca and Ce, and with a roof tile

The 3D Elevation Program: summary for Connecticut

Science.gov (United States)

Carswell, William J.

2015-01-01

Elevation data are essential to a broad range of applications, including forest resources management, wildlife and habitat management, national security, recreation, and many others. For the State of Connecticut, elevation data are critical for coastal zone management, flood risk management, natural resources conservation, agriculture and precision farming, sea level rise and subsidence, and other business uses. Today, high-density light detection and ranging (lidar) data are the primary sources for deriving elevation models and other datasets. Federal, State, Tribal, and local agencies work in partnership to (1) replace data that are older and of lower quality and (2) provide coverage where publicly accessible data do not exist. A joint goal of State and Federal partners is to acquire consistent, statewide coverage to support existing and emerging applications enabled by lidar data.

Effects of Economic Conditions and Organizational Structure on Local Health Jurisdiction Revenue Streams and Personnel Levels in Connecticut, 2005-2012.

Science.gov (United States)

Pallas, Sarah Wood; Kertanis, Jennifer; O'Keefe, Elaine; Humphries, Debbie L

2015-01-01

We investigated whether or not changes in economic conditions during the 2008-2010 U.S. recession were associated with changes in Connecticut local health jurisdictions' (LHJs') revenue or personnel levels. We analyzed Connecticut Department of Public Health 2005-2012 annual report data from 91 Connecticut LHJs, as well as publicly available data on economic conditions. We used fixed- and random-effect regression models to test whether or not LHJ per capita revenues and full-time equivalent (FTE) personnel differed during and post-recession compared with pre-recession, or varied with recession intensity, as measured by unemployment rates and housing permits. On average, total revenue per capita was significantly lower during and post-recession compared with pre-recession, with two-thirds of LHJs experiencing per capita revenue reductions. FTE personnel per capita were significantly lower post-recession. Changes in LHJ-level unemployment rates and housing permits did not explain the variation in revenue or FTE personnel per capita. Revenue and personnel differed significantly by LHJ organizational structure across all time periods. Economic downturns can substantially reduce resources available for local public health. LHJ organizational structure influences revenue levels and sources, with implications for the scope, quality, and efficiency of services delivered.

Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Third Evaluation Report and Appendices

Energy Technology Data Exchange (ETDEWEB)

Chandler, K.; Eudy, L.

2010-01-01

This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The prototype fuel cell bus was manufactured by Van Hool and ISE Corp. and features an electric hybrid drive system with a UTC Power PureMotion 120 Fuel Cell Power System and ZEBRA batteries for energy storage. The fuel cell bus started operation in April 2007, and evaluation results through October 2009 are provided in this report.

Some regularities of Ce(3) and Ce(4) stabilization in their compounds with β-diketones

International Nuclear Information System (INIS)

Pechurova, N.I.; Martynenko, L.I.; Snezhko, N.I.; Anufrieva, S.I.

1985-01-01

Adduct formation of cerium (3) and cerium (4) β-diketonates (acetylacetonate, benzoylacetonate, dibenzoylmethanate and thenoyltrifluoroacetonate) with oxygen- and nitrogen-donor ligands (Q-α, α'-dipyridyl, o-phenanthroline, trioctylphosphine oxide and triphenylphosphine oxide) is studied. The compounds obtained as a results of the reactions are studied by means of IR-spectroscopic, derivatographic and X-ray phase methods. It is concluded that composition and thermodynamic stability of adducts of Ce(3) tris-β-diketonates are determined by correlation of donor properties of the basis and additional ligand and stability of adducts to oxidation - as well as by their solubility. Introduction of the additional ligand to the system Ce(4)-β-diketones even in the presence of air oxygen stabilizes Ce(3) and destabilizes Ce(4)

Unstable magnetic moments in Ce compounds

International Nuclear Information System (INIS)

Aarts, J.

1984-01-01

The problems which are connected with the appearance or disappearance of local moments in metals are well reflected in the magnetic behaviour of Ce intermetallic compounds. This work describes experiments on two Ce compounds which are typical examples of unstable moment systems. The first of these is CeAl 2 which at low temperatures, shows coexistence of antiferromagnetic order and the Kondo effect. Measurements are presented of the magnetization and the susceptibility in different magnetic field and temperature regions. An analysis of these measurements, using a model for the crystal field effects, shows the agreement between the measurements and the calculations to be reasonably good for CeAl 2 , but this agreement becomes worse upon decreasing Ce concentration. A phenomenological description of the observations is given. The second compound reported on is CeCu 2 Si 2 , the first 'heavy-fermion' superconductor to be investigated. The superconducting state is possibly formed by the quasi-particles of a non-magnetic many body singlet state, and not simply by the (sd) conduction electrons. This being a novel phenomenon, a number of experiments were performed to test this picture and to obtain a detailed description of the behaviour of CeCu 2 Si 2 . Measurements of the Meissner volume, confirmed the superconductivity to be intrinsic. (Auth.)

Ce decay curves in Ce, Tb co-doped LaF3 and the energy transfer mechanism

International Nuclear Information System (INIS)

Kroon, R.E.; Swart, H.C.; Ntwaeaborwa, O.M.; Seed Ahmed, H.A.A.

2014-01-01

Energy transfer phenomena can play an important role in the development of luminescent materials, and hosts co-doped with Ce 3+ and Tb 3+ ions continue to be actively studied. Several recent reports on Ce, Tb co-doped phosphors suggest different mechanisms for the energy transfer from Ce 3+ to Tb 3+ ions and further study is required to reach consensus on the mechanism or to understand why different mechanisms dominate in different hosts. A more direct method of analysis is proposed to distinguish between the different types of multipole energy transfer mechanisms. When applied to Ce, Tb co-doped LaF 3 , the experimental data shows a poor match to any of these models but is consistent with energy transfer through the exchange mechanism. The decay curves of Ce emission in Ce, Tb co-doped LaF 3 were also studied to obtain further insight on the energy transfer mechanism. Although the decrease in lifetime with increasing Tb concentration shows that energy transfer occurs through a non-radiative mechanism, the form of the decay curves does not correspond to what is expected for energy transfer via multipole interactions.

Evaluating the Impact of a Connecticut Program to Reduce Availability of Unhealthy Competitive Food in Schools

Science.gov (United States)

Long, Michael W.; Henderson, Kathryn E.; Schwartz, Marlene B.

2010-01-01

Background: This article seeks to inform state and local school food policies by evaluating the impact of Connecticut's Healthy Food Certification (HFC), a program which provides monetary incentives to school districts that choose to implement state nutrition standards for all foods sold to students outside reimbursable school meals. Methods: Food…

75 FR 18828 - PSEG Power Connecticut LLC, Complainant v. ISO New England Inc., Respondent; Notice of Complaint

Science.gov (United States)

2010-04-13

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. EL10-58-000] PSEG Power Connecticut LLC, Complainant v. ISO New England Inc., Respondent; Notice of Complaint April 6, 2010. Take... ISO New England Inc. (Respondent) challenging the justness and reasonableness of the Respondent's...

Homoleptic Ce(III) and Ce(IV) Nitroxide Complexes: Significant Stabilization of the 4+ Oxidation State

Energy Technology Data Exchange (ETDEWEB)

Bogart, Justin A.; Lewis, Andrew J.; Medling, Scott A.; Piro, Nicholas A.; Carroll, Patrick J.; Booth, Corwin H.; Schelter, Eric J.

2014-06-25

Electrochemical experiments performed on the complex Ce-IV[2-((BuNO)-Bu-t)py](4), where [2-((BuNO)-Bu-t)py](-) = N-tert-butyl-N-2-pyridylnitroxide, indicate a 2.51 V stabilization of the 4+ oxidation state of Ce compared to [(Bu4N)-Bu-n](2)[Ce(NO3)(6)] in acetonitrile and a 2.95 V stabilization compared to the standard potential for the ion under aqueous conditions. Density functional theory calculations suggest that this preference for the higher oxidation state is a result of the tetrakis(nitroxide) ligand framework at the Ce cation, which allows for effective electron donation into, and partial covalent overlap with, vacant 4f orbitals with delta symmetry. The results speak to the behavior of CeO2 and related solid solutions in oxygen uptake and transport applications, in particular an inherent local character of bonding that stabilizes the 4+ oxidation state. The results indicate a cerium(IV) complex that has been stabilized to an unprecedented degree through tuning of its ligand-field environment.

The role of Ce(III) in BZ oscillating reactions

Science.gov (United States)

Nogueira, Paulo A.; Varela, Hamilton; Faria, Roberto B.

2012-03-01

Herein we present results on the oscillatory dynamics in the bromate-oxalic acid-acetone-Ce(III)/Ce(IV) system in batch and also in a CSTR. We show that Ce(III) is the necessary reactant to allow the emergence of oscillations. In batch, oscillations occur with Ce(III) and also with Ce(IV), but no induction period is observed with Ce(III). In a CSTR, no oscillations were found using a freshly prepared Ce(IV), but only when the cerium-containing solution was aged, allowing partial conversion of Ce(IV) to Ce(III) by reaction with acetone.

Promoting effect of CeO 2 on cyclohexanol conversion over CeO 2

Indian Academy of Sciences (India)

Abstract. CeO2-ZnO materials were prepared by amorphous citrate process and characterized by TGA, XRD, UV-DRS and surface area measurements. TGA showed that the citrate precursors decompose in the range 350-550°C producing CeO2-containing catalytic materials. XRD and DRS results indicated the formation of ...

A facile synthesis for cauliflower like CeO2 catalysts from Ce-BTC precursor and their catalytic performance for CO oxidation

Science.gov (United States)

Zhang, Xiaodong; Hou, Fulin; Yang, Yang; Wang, Yuxin; Liu, Ning; Chen, Dan; Yang, Yiqiong

2017-11-01

The paper presents a novel and facile method for preparing cauliflowerlike CeO2 through direct decomposition of cerium based metal-organic framework (MOF) Ce-BTC (BTC = 1,3,5-benzenetricarboxylic acid) straw in air. Several analytical tools such as Scanning electron microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric (TG), N2 adsorption-desorption, Temperature programmed reduction (TPR), Raman, X-ray photoelectron spectroscopic (XPS) and Photoluminescence (PL) have been used to characterize Ce-BTC and CeO2. The Ce-BTC calcined at 500 °C (CeO2-500) maintains the morphology of its template ;Ce-BTC; and forms a special cauliflower-like structure. XRD patterns showed that the catalyst has a perfect CeO2 crystal structure and has a smaller particle size. The prepared CeO2 cauliflowers exhibit excellent catalytic activities, long-term stability, and cycling stability for CO oxidation. The improved catalytic activities could be attributed to porous nanorods of CeO2 cauliflowers, which provide more active sites and oxygen vacancy for CO oxidation.

Cerocene Revisited: The Electronic Structure of and Interconversion Between Ce2(C8H8)3 and Ce(C8H8)2

Energy Technology Data Exchange (ETDEWEB)

Walter, Marc D.; Booth, Corwin H.; Lukens, Wayne W.; Andersen, Richard A.

2009-02-02

New synthetic procedures for the preparation of Ce(cot)2, cerocene, from [Li(thf)4][Ce(cot)2], and Ce2(cot)3 in high yield and purity are reported. Heating solid Ce(cot)2 yields Ce2(cot)3 and COT while heating Ce2(cot)3 with an excess of COT in C6D6 to 65oC over four months yields Ce(cot)2. The solid state magnetic susceptibility of these three organocerium compounds shows that Ce(cot)2 behaves as a TIP (temperature independent paramagnet) over the temperature range of 5-300 K, while that of Ce2(cot)3 shows that the spin carriers are antiferromagnetically coupled below 10 K; above 10 K, the individual spins are uncorrelated, and [Ce(cot)2]- behaves as an isolated f1 paramagnet. The EPR at 1.5K for Ce2(cot)3 and [Ce(cot)2]- have ground state of MJ= +- 1/2. The LIII edge XANES of Ce(cot)2 (Booth, C.H.; Walter, M.D.; Daniel, M.; Lukens, W.W., Andersen, R.A., Phys. Rev. Lett. 2005, 95, 267202) and 2Ce2(cot)3 over 30-500 K are reported; the Ce(cot)2 XANES spectra show Ce(III) and Ce(IV) signatures up to a temperature of approximately 500 K, whereupon the Ce(IV) signature disappears, consistent with the thermal behavior observed in the melting experiment. The EXAFS of Ce(cot)2 and Ce2(cot)3 are reported at 30 K; the agreement between the molecular parameters for Ce(cot)2 derived from EXAFS and single crystal X-ray diffraction data are excellent. In the case of Ce2(cot)3 no X-ray diffraction data are known to exist, but the EXAFS are consistent with a"triple-decker" sandwich structure. A molecular rationalization is presented for the electronic structure of cerocene having a multiconfiguration ground state that is an admixture of the two configurations Ce(III, 4f1)(cot1.5-)2 and Ce(IV, 4f0)(cot2-)2; the multiconfigurational ground state has profound effects on the magnetic properties and on the nature of the chemical bond in cerocene and, perhaps, other molecules.

Glass forming ability of the Al-Ce-Ni system; Avaliacao da capacidade de formacao vitrea do sistema Al-Ce-Ni

Energy Technology Data Exchange (ETDEWEB)

Triveno Rios, C. [Engenharia Mecanica, Universidade Federal de Mato Grosso, Rondonopolis, MT (Brazil)], e-mail: triveno@ufmt.br; Surinach, S.; Baro, M.D. [Departamento de Engenharia de Materiais - Universidade Federal de Sao Carlos, SP (Brazil); Bolfarini, C.; Botta, W.J.; Kiminami, C.S. [Departamento de Fisica da Universidade Autonoma de Barcelona, Bellaterra (Spain)

2010-07-01

In the present work, the glass forming ability (GFA) and its compositional dependence on Al-Ni-Ce system alloys were investigated in function of several thermal parameters. Rapidly quenched Al{sub 85}Ni{sub 15}-{sub X}Ce{sub X} (X=4,5,6,7,10), Al{sub 90}Ni{sub 5}Ce{sub 5}, Al{sub 89}Ni{sub 2}.{sub 4}Ce{sub 8}.{sub 6}, Al{sub 80}Ni{sub 15.6}Ce{sub 4}.{sub 4} and Al{sub 78}Ni{sub 18.5}Ce{sub 3.5} amorphous ribbons were produced by melt-spinning and the structural transformation during heating was studied using a combination of X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The results showed that the GFA and the thermal stability in the Al-rich corner of Al- Ni-Ce system alloys were enhanced by increasing the solute content and specifically the Ce content (author)

Mechanical properties of non-centrosymmetric CePt3Si and CePt3B

Science.gov (United States)

Rogl, G.; Legut, D.; Sýkora, R.; Müller, P.; Müller, H.; Bauer, E.; Puchegger, S.; Zehetbauer, M.; Rogl, P.

2017-05-01

Elastic moduli, hardness (both at room temperature) and thermal expansion (4.2-670 K) have been experimentally determined for polycrystalline CePt3Si and its prototype compound CePt3B as well as for single-crystalline CePt3Si. Resonant ultrasound spectroscopy was used to determine elastic properties (Young’s modulus E and Poisson’s ratio ν) via the eigenfrequencies of the sample and the knowledge of sample mass and dimensions. Bulk and shear moduli were calculated from E and ν, and the respective Debye temperatures were derived. In addition, ab initio DFT calculations were carried out for both compounds. A comparison of parameters evaluated from DFT with those of experiments revealed, in general, satisfactory agreement. Positive and negative thermal expansion values obtained from CePt3Si single crystal data are fairly well explained in terms of the crystalline electric field model, using CEF parameters derived recently from inelastic neutron scattering. DFT calculations, in addition, demonstrate that the atomic vibrations keep almost unaffected by the antisymmetric spin-orbit coupling present in systems with crystal structures having no inversion symmetry. This is opposite to electronic properties, where the antisymmetric spin-orbit interaction has shown to distinctly influence features like the superconducting condensate of CePt3Si.

Crystal growth and scintillation properties of multi-component oxide single crystals: Ce:GGAG and Ce:La-GPS

Energy Technology Data Exchange (ETDEWEB)

Yoshikawa, A., E-mail: yoshikawa@imr.tohoku.ac.jp [Institute for Materials Research (IMR), Tohoku University, Sendai 980-8577 (Japan); New Industry Creation Hatchery Center (NICHe), Tohoku University, Sendai 980-8579 (Japan); C& A Corporation, 6-6-40 Aramaki Aza Aoba, Aoba-ku, Sendai 980-8579 (Japan); Kamada, K. [New Industry Creation Hatchery Center (NICHe), Tohoku University, Sendai 980-8579 (Japan); C& A Corporation, 6-6-40 Aramaki Aza Aoba, Aoba-ku, Sendai 980-8579 (Japan); Kurosawa, S. [Institute for Materials Research (IMR), Tohoku University, Sendai 980-8577 (Japan); New Industry Creation Hatchery Center (NICHe), Tohoku University, Sendai 980-8579 (Japan); Shoji, Y. [Institute for Materials Research (IMR), Tohoku University, Sendai 980-8577 (Japan); C& A Corporation, 6-6-40 Aramaki Aza Aoba, Aoba-ku, Sendai 980-8579 (Japan); Yokota, Y. [New Industry Creation Hatchery Center (NICHe), Tohoku University, Sendai 980-8579 (Japan); Chani, V.I. [Institute for Materials Research (IMR), Tohoku University, Sendai 980-8577 (Japan); Nikl, M. [Institute of Physics, AS CR, Cukrovarnická 10, 162 53 Prague (Czech Republic)

2016-01-15

Crystal growth by micro-pulling-down, Czochralski, and floating zone methods and scintillation properties of Ce:Gd{sub 3}(Ga,Al){sub 5}O{sub 12} (Ce:GGAG) multi-component oxide garnets, and Ce:Gd{sub 2}Si{sub 2}O{sub 7} (Ce:GPS) or Ce:(La,Gd){sub 2}Si{sub 2}O{sub 7} (Ce:La-GPS) pyro-silicates are reviewed. GGAG crystals demonstrated practically linear dependences of some of the parameters including lattice constant, emission wavelength, and band gap on Ga content. However, emission intensity, light yield and energy resolution showed maxima for intermediate compositions. GGAG crystals had the highest light yield of 56,000 photon/MeV for Ga content of 2.7 atoms per garnet formula unit. Similarly the light yield and energy resolution of La-GPS showed the highest values of 40,000 photon/MeV and 4.4%@662 keV, respectively, for La-GPS containing 10% of La. Moreover, La-GPS demonstrated stable scintillation performance up to 200 °C.

Experimental and theoretical study about sulfur deactivation of Ni/ CeO{sub 2} and Rh/CeO{sub 2} catalysts

Energy Technology Data Exchange (ETDEWEB)

Ocsachoque, Marco A., E-mail: ocmarco@quimica.unlp.edu.ar [Centro de Investigación y Desarrollo en Ciencias Aplicadas “Dr Jorge J. Ronco”, (CONICET, CCT La Plata), Departamento de Química, Facultad de Cs Exactas (UNLP), Calle 48 N° 257, 1900 La Plata (Argentina); Eugenio Russman, Juan I.; Irigoyen, Beatriz [Instituto de Tecnologías del Hidrógeno y Energías Sostenibles (ITHES), Departamento de Ingeniería Química, Facultad de Ingeniería (UBA), Buenos Aires (Argentina); Gazzoli, Delia [Dipartimento di Chimia, Universitá di Roma “La Sapienza”, Roma (Italy); González, María G. [Centro de Investigación y Desarrollo en Ciencias Aplicadas “Dr Jorge J. Ronco”, (CONICET, CCT La Plata), Departamento de Química, Facultad de Cs Exactas (UNLP), Calle 48 N° 257, 1900 La Plata (Argentina)

2016-04-01

Sulfur deactivation of Ni/CeO{sub 2} and Rh/CeO{sub 2} catalysts were examined through an experimental and theoretical study. These catalysts were characterized by N{sub 2} adsorption, X-ray diffraction, temperature programmed reaction, thermogravimetric analysis, Uv–visible spectroscopy and Raman spectroscopy, and tested under the methane dry reforming reaction in the presence of H{sub 2}S. On the other hand, different possible interactions of sulfur with Rh, Ni or surface sites of the CeO{sub 2} support were evaluated by performing energy calculations with the density functional theory (DFT). Overall, the results indicate that tolerance to sulfur of Rh/CeO{sub 2} catalyst is higher than that of Ni/CeO{sub 2} one. In this sense, TPR measurements show that reduction of CeO{sub 2} is promoted by the presence of Rh. This effect, probably caused by hydrogen spillover to CeO{sub 2} support during the reduction of RhO{sub x} species, could be linked to a high oxygen donation capacity of Rh/CeO{sub 2} catalysts. Accordingly, the O{sup 2−} species existing on Rh/CeO{sub 2} catalysts, revealed by Raman spectra of these samples, could favor sulfur oxidation and prevent Rh–S interactions. Likewise, the theoretical calculations show that desorption of S–O species from Rh/CeO{sub 2} system is more favorable than that from Ni/CeO{sub 2} one. Therefore, our experimental and theoretical study about sulfur deactivation of Ni and Rh supported on CeO{sub 2} allow us to postulate that Rh can help to desorb SO{sub x} species formed on the support, retarding sulfur poisoning of the Rh/CeO{sub 2} catalysts. - Highlights: • CeO{sub 2} support can act as a sacrifice trap decreasing sulfur poisoning. • Theoretical calculations indicate an important nickel affinity with sulfur. • Rh would favor desorption of S–O species formed on the support. • The O{sup 2−} species present on the Rh–CeO{sub 2} sample favor sulfur removal.

Transitions between localized and itinerant antiferromagnetism in the Ce(Pb,In) sub 3 and Ce(Pb,Tl) sub 3 systems

Energy Technology Data Exchange (ETDEWEB)

Rahman, S; Timlin, J; Crow, J E; Mihalisin, T; Schlottmann, P [Temple Univ., Philadelphia, PA (United States)

1990-01-01

CePb{sub 3} is an itinerant heavy fermion antiferromagnetic displaying an incommensurate magnetic structure and an extremely small ordered moment. CeIn{sub 3} and CeTl{sub 3}, on the other hand are well-localized, simple antiferromagnets with the full moments expected for crystal field doublet Ce{sup 3+} ion systems. The authors have performed specific heat, sysceptibility and resistivity measurements for both the Ce(Pb,In){sub 3} and Ce(Pb,Tl){sub 3} systems. These systems remain cubic Cu{sub 3}Au structures across the entire series. They display extremely interesting T{sub N} behavior which suggests that a continuous transition from itinerant to localized antiferromagnetic behavior occurs for the Ce(Pb,Tl){sub 3} system. In the Ce (Pb,In){sub 3} system both types of antiferromagnetism are present but they are separated by a concentration range ({approximately}10-40% Pb) over which antiferromagnetism does not exist. The behavior of these systems cannot be accounted for by a Kondo necklace approach that neglects the coherence of a heavy fermion lattice and resulting itinerant antiferromagnetism.

Superconductivity and anomalous normal state in the CePd2Si2/CeNi2Ge2 system

International Nuclear Information System (INIS)

Grosche, F.M.; Lister, S.J.S.; Carter, F.V.; Saxena, S.S.; Haselwimmer, R.K.W.; Mathur, N.D.; Julian, S.R.; Lonzarich, G.G.

1997-01-01

The unconventional nonmagnetic metal CeNi 2 Ge 2 is characterised at ambient pressure by temperature dependences of the specific heat and of the resistivity which deviate strongly from standard Fermi-liquid predictions and are reminiscent of the behaviour observed in its sibling system CePd 2 Si 2 above the critical pressure at which magnetic order is suppressed. We have explored the CePd 2 Si 2 /CeNi 2 Ge 2 phase diagram in a series of resistivity measurements under high hydrostatic pressure, p. At p>15 kbar, a new superconducting transition appears below 220 mK in CeNi 2 Ge 2 and shifts to higher temperatures with increasing pressure, reaching ∝400 mK at p∝26 kbar. (orig.)

Redox potentials and kinetics of the Ce 3+/Ce 4+ redox reaction and solubility of cerium sulfates in sulfuric acid solutions

Science.gov (United States)

Paulenova, A.; Creager, S. E.; Navratil, J. D.; Wei, Y.

Experimental work was performed with the aim of evaluating the Ce 4+/Ce 3+ redox couple in sulfuric acid electrolyte for use in redox flow battery (RFB) technology. The solubility of cerium sulfates in 0.1-4.0 M sulfuric acid at 20-60 °C was studied. A synergistic effect of both sulfuric acid concentration and temperature on the solubility of cerous sulfate was observed. The solubility of cerous sulfate significantly decreased with rising concentration of sulfuric acid and rising temperature, while the solubility of ceric sulfate goes through a significant maximum at 40 °C. Redox potentials and the kinetics of the cerous/ceric redox reaction were also studied under the same temperature-concentration conditions. The redox potentials were measured using the combined redox electrode (Pt-Ag/AgCl) in equimolar Ce 4+/Ce 3+ solutions (i.e.[Ce 3+]=[Ce 4+]) in sulfuric acid electrolyte. The Ce 3+/Ce 4+ redox potentials significantly decrease (i.e. shift to more negative values) with rising sulfuric acid concentration; a small maximum is observed at 40 °C. Cyclic voltammetric experiments confirmed slow electrochemical kinetics of the Ce 3+/Ce 4+ redox reaction on carbon glassy electrodes (CGEs) in sulfuric acid solutions. The observed dependencies of solubilities, the redox potentials and the kinetics of Ce 3+/Ce 4+ redox reaction on sulfuric acid concentration are thought to be the result of inequivalent complexation of the two redox species by sulfate anions: the ceric ion is much more strongly bound to sulfate than is the cerous ion. The best temperature-concentration conditions for the RFB electrolytes appear to be 40 °C and 1 M sulfuric acid, where the relatively good solubility of both cerium species, the maximum of redox potentials, and the more or less satisfying stability of CGE s were found. Even so, the relatively low solubility of cerium salts in sulfuric acid media and slow redox kinetics of the Ce 3+/Ce 4+ redox reaction at carbon indicate that the Ce 3+/Ce

Ce-doped nanoparticles of TiO2: Rutile-to-brookite phase transition and evolution of Ce local-structure studied with XRD and XANES

International Nuclear Information System (INIS)

Kityakarn, Sutasinee; Worayingyong, Attera; Suramitr, Anwaraporn; Smith, M.F.

2013-01-01

The crystal and electronic structural changes undergone by TiO 2 nanoparticles when Ce is introduced were studied using X-ray diffraction (XRD) and X-ray absorption near-edge spectroscopy (XANES). A small amount of Ce (less than 1% molar concentration) resulted in i/a significant reduction of the average size of the TiO 2 nanoparticles and ii/a phase transition in which brookite replaced rutile as the minority phase component (anatase was the majority phase component at all Ce concentrations studied up to 10% molar concentration). The Ce L3 edge XANES revealed changes in the local environment of Ce impurities. As Ce concentration was increased the fraction of Ce that have formal valence of +3 decreased and, for the remaining Ce with valence +4, the 4f orbitals became less-strongly hybridized with the p-orbitals of oxygen neighbors. The results have implications for photocatalytic and gas sensing properties of Ce-doped TiO 2 . - Highlights: ► Ce-doping: TiO 2 nanoparticles shrink and minority phase changes rutile-> brookite. ► XANES reveals phase change for arbitrarily small particles (while XRD fails). ► As Ce added: fraction of Ce +3 dopants falls, hybridization of Ce +4 with O weakens

Synthesis and characterization of Ce doped MFI zeolite

International Nuclear Information System (INIS)

Kalita, Banani; Talukdar, Anup K.

2012-01-01

Highlights: ► Cerium was incorporated into the tetrahedral position of MFI zeolite structure. ► Unit cell volume increases with an increase of Ce content in the framework of MFI. ► A band at 310 nm in the UV–vis spectra indicates Ce incorporation in MFI structure. ► The mass loss (%) in the region 373–423 K decreases with increase of Ce in MFI. - Abstract: Ce doped MFI (mobil five) zeolites with different Si to (Ce + Al) and different Ce to Al ratios were synthesized by a hydrothermal synthesis method. All the samples were characterized by different techniques such as X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), UV–vis diffuse reflectance spectroscopy (DRS) and scanning electron microscopy (SEM). The results showed that almost pure MFI phase was obtained in all cases with incorporation of cerium metal into the framework. The increase in unit cell parameters observed with an increase in Ce content is indicative of incorporation of Ce into the framework structure of microporous material MFI. Corroboration of the framework incorporation of Ce into the MFI zeolite structure was also obtained from the UV–vis DRS spectra by the presence of an absorption band at 280 nm. TGA and SEM of the samples provide complementary evidence for Ce incorporation into the framework MFI structure.

Catalytic reforming of toluene as tar model compound: effect of Ce and Ce-Mg promoter using Ni/olivine catalyst.

Science.gov (United States)

Zhang, Ruiqin; Wang, Huajian; Hou, Xiaoxue

2014-02-01

Tar produced by biomass gasification as a route of renewable energy must be removed before the gas can be used. This study was undertaken using toluene as a model tar compound for evaluating its steam reforming conversion with three Ni-based catalysts, Ni/olivine, Ni-Ce/olivine and Ni-Ce-Mg/olivine. Effects of Ce and Mg promoters on the reaction activity and coke deposition were studied. Overall the performance of Ce and Mg promoted Ni/olivine catalysts is better than that of only Ce promoter and Ni/olivine alone. The experimental results indicate that Ni-Ce-Mg/olivine catalysts could improve the resistance to carbon deposition, enhance energy gases yield and resist 10ppm H2S poison at 100mLmin(-1) for up to 400min. Furthermore, the activity of catalysts was related to the steam/carbon (S/C) ratios; at S/C ratio=5, T=790°C, space velocity=782h(-1) and t=2h, the Ni-Ce-Mg/olivine system yielded 89% toluene conversion, 5.6Lh(-1) product gas rate, 62.6mol% H2 content and 10% (mol useful gas mol(-1) toluene) energy yield. Moreover, at low S/C ratio, it had higher reaction activity and better ability to prevent coking. There is a small amount of carbon deposition in the form of amorphous carbon after 7h. Various characterization techniques such as XRD, FTIR and thermogravimetric were performed to investigate the coke deposition of Ni/olivine, Ni-Ce/olivine and Ni-Ce-Mg/olivine. It is suggested that 3% Ni-1% Ce-1% Mg/olivine was the most promising catalyst due to its minimum coke amount and the lower activation energy of coke burning. Copyright © 2014. Published by Elsevier Ltd.

Nuclear instrument upgrade at Connecticut Yankee Atomic Power Station

International Nuclear Information System (INIS)

Brothers, M.H.; Flynn, B.J.; Shugars, H.G.

1989-01-01

After 20 years of commercial operation, the Connecticut Yankee Atomic Power Station decided to replace the original nuclear instrument system. The plant was motivated primarily by reliability and maintainability problems, the former attributed to equipment wearout and discrete component failure, and the latter to the unavailability of qualified spare parts, another effect of the equipment's age. In replacing the system, the plant also had to address current regulatory, design, and plant technical specification requirements, including physical separation, signal isolation, and changes in equipment qualification. This paper discusses the motivation for the system's replacement, the challenges to the plant engineers and equipment designers, the ways in which the new design met the challenges, the test results of the new system, and other potential benefits supported by the test results

Oxidation of Ce(III) in Foam Decontaminant by Ozone

Energy Technology Data Exchange (ETDEWEB)

Jung, Chong Hun; Yoon, I. H.; Choi, W. K.; Moon, J. K.; Yang, H. B. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, J. S. [Gachon University, Seongnam (Korea, Republic of)

2016-10-15

A nanoparticle-based foam decontaminant is composed of a surfactant and nanoparticles for the generation and maintenance of foam, and a chemical decontamination agent made of Ce(IV) dissolved in nitric acid. Ce(IV) will be reduced to Ce(III) through the decontamination process. Oxidizing cerium(III) can be reused as a decontamination agent, Ce(IV). Oxidation treatment technology by ozone uses its strong oxidizing power. It can be regarded as an environmentally friendly process, because ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site, and used ozone can decompose immediately. The ozonation treatment of Ce(III) in foam decontaminant containing a surfactant is necessary for the effective regeneration of Ce(III). Thus, the present study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) into Ce(IV) in the nanoparticle-based foam decontaminant containing surfactant. This study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) to Ce(IV) in nanoparticle-based foam decontaminant containing a TBS surfactant. The oxidation conversion rate of Ce(III) was increased with an increase in the flow rate of the gas mixture and ozone injection amount. The oxidation time required for the 100% oxidation conversion of Ce(III) to Ce(IV) at a specific ozone injection amount can be predicted from these experimental data.

Oxidation of Ce(III) in Foam Decontaminant by Ozone

International Nuclear Information System (INIS)

Jung, Chong Hun; Yoon, I. H.; Choi, W. K.; Moon, J. K.; Yang, H. B.; Lee, J. S.

2016-01-01

A nanoparticle-based foam decontaminant is composed of a surfactant and nanoparticles for the generation and maintenance of foam, and a chemical decontamination agent made of Ce(IV) dissolved in nitric acid. Ce(IV) will be reduced to Ce(III) through the decontamination process. Oxidizing cerium(III) can be reused as a decontamination agent, Ce(IV). Oxidation treatment technology by ozone uses its strong oxidizing power. It can be regarded as an environmentally friendly process, because ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site, and used ozone can decompose immediately. The ozonation treatment of Ce(III) in foam decontaminant containing a surfactant is necessary for the effective regeneration of Ce(III). Thus, the present study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) into Ce(IV) in the nanoparticle-based foam decontaminant containing surfactant. This study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) to Ce(IV) in nanoparticle-based foam decontaminant containing a TBS surfactant. The oxidation conversion rate of Ce(III) was increased with an increase in the flow rate of the gas mixture and ozone injection amount. The oxidation time required for the 100% oxidation conversion of Ce(III) to Ce(IV) at a specific ozone injection amount can be predicted from these experimental data

Tetragonal zirconia ceramics in Zr O2-Ce O2 system (Ce-TZP): preparation, characterization and mechanical properties

International Nuclear Information System (INIS)

Andrade Nono, M.C. de.

1992-01-01

This paper describes and discusses the results achieved in a study about Ce-TZP ceramics prepared from conventional powder mixtures of Zr O 2 and Ce O 2 (with composition in the range of 8 to 16 mol% Ce O 2 ). Physical and chemical characteristics were related with the powder compaction behavior and with the sintering state. The sintered ceramics showed a level of high porosity (≅ 4%), mainly due to the fairly adequate powder characteristics and compaction. The crystalline phases were analysed from X-rays diffraction data and showed that these ceramics can present tetragonal-to-monoclinic stress induced transformation. The bending strength, fracture toughness and Vickers hardness results were influenced by Ce O 2 content microstructure and sintering temperature. These Ce-TZP ceramics showed mechanical strength results comparable to those published in the international literature. (author)

Chemically abrupt interface between Ce oxide and Fe films

International Nuclear Information System (INIS)

Lee, H.G.; Lee, D.; Kim, S.; Kim, S.G.; Hwang, Chanyong

2005-01-01

A chemically abrupt Fe/Ce oxide interface can be formed by initial oxidation of an Fe film followed by deposition of Ce metal. Once a Ce oxide layer is formed on top of Fe, it acts a passivation barrier for oxygen diffusion. Further deposition of Ce metal followed by its oxidation preserve the abrupt interface between Ce oxide and Fe films. The Fe and Ce oxidation states have been monitored at each stage using X-ray photoelectron spectroscopy

Redox behavior of Ce(IV)/Ce(III) in the presence of nitrilotriacetic acid: a surrogate study for An(IV)/An(III) redox behavior

International Nuclear Information System (INIS)

Suzuki, Y.; Nankawa, T.; Ohnuki, T.; Francis, A.J.

2010-01-01

Using cyclic voltammetry, we investigated the redox behavior of Ce(IV)/Ce(III), which is a surrogate for An(IV)/An(III) (An = actinides), in a solution of nitrilotriacetic acid (NTA) at 25 C. The cyclic voltammogram of Ce in a 0.1 M NTA solution at pH 6 showed a reversible one-electron redox reaction for Ce(IV)/Ce(III) at 0.51 V vs. Ag/AgCl. This redox potential was much lower than that obtained in 1 M nitric acid, indicating that Ce(IV) was preferentially stabilized by complexation with NTA. The redox potential in the NTA solution was independent of the Ce concentration from 2 to 20 mM, NTA concentration from 5 to 200 mM and pH between 3 and 7. These results indicated that no polymerization and no additional coordination of NTA and OH to the Ce(III)-NTA complex took place during the redox reaction. As the speciation calculation of Ce(III) in the NTA solution showed that the predominant species was Ce III (nta) 2 3 (H 3 nta = NTA), the redox reaction of the Ce-NTA complex was expressed by the following: Ce IV (nta) 2 2- + e - ↔ Ce III (nta) 2 3 . The logarithm of the stability constant of Ce IV (nta) 2 2- was calculated to be 38.6 ± 0.8 for I = 0 from the redox potential shift of Ce(IV)/Ce(III) in the NTA solution. The value was in good accordance with the stability constant of the Np IV (nta) 2 2- complex, demonstrating that the aqueous coordination chemistry of Ce(IV) with NTA is quite similar to that of An(IV). These results strongly suggest that a negative shift of the Pu(IV)/Pu(III) redox potential in the NTA solution should make Pu(IV) more stable than Pu(III) even in a reducing environment. (orig.)

An Examination of Mental Health Content in Course Work and Field Experiences in Connecticut Educational Leadership Preparation Programs

Science.gov (United States)

Papa, Dorothy P.

2017-01-01

This exploratory mixed method convergent parallel study examined Connecticut Educational leadership preparation programs for the existence of mental health content to learn the extent to which pre-service school leaders are prepared for addressing student mental health. Interviews were conducted with school mental health experts and Connecticut…

Synthesis of CeS and interactions with molten metals

International Nuclear Information System (INIS)

Krikorian, O.H.; Curtis, P.G.

1988-01-01

Hot-pressed and sintered discs of single-phase CeS were tested for interaction with molten aluminium, uranium, and iron to determine the conditions under which reaction first begins and the nature of the reaction. Aluminium begins to react with CeS at ∼ 1190 K, slowly dissolving cerium and forming a thin layer of Ce 3 S 4 at the reaction interface. At 1363 K, aluminium wets and spreads over the CeS surface and dissolves ∼ 01 at% Ce. Ce 3 Al 11 precipitates out in the aluminium phase on cooldown. Uranium does not react with CeS at 1673 K, but at 1873 K it wets and spreads on CeS and dissolves ∼ 100 atom ppm S, which precipitates out as US on cooldown. Iron wets CeS at 1873 K and 1973 K but does not spread or interact. Because of the desirable containment characteristics of CeS and similar sulfides for molten metals, we recommend their use in a number of applications. (author)

(EC+β+) decay of 130Ce

International Nuclear Information System (INIS)

Xu Shuwei; Zhang Tianmei; Xie Yuanxiang; Ma Ruichang; Ge Yuanxiu; Guo Yingxiang; Wang Chunfang; Li Zhankui; Guo Bing; Xing Jianping; Guo Tianrui; Zhu Shaofei; Xu Wang; Du Jinzhou

1996-01-01

The nuclide 130 Ce was produced by a ( 16 O, 4n) reaction on an enriched 118 Sn target. Reaction products were transported to a shielded location by using a helium-jet tape transport system. A 22.9 min activity in chemically separated cerium sample was identified as 130 Ce. The (EC+β + ) decay scheme of 130 Ce was proposed for the first time. This scheme includes 108 γ-lines, 107 γ-lines among them being new. More than 13 1 + low-lying states of 130 La are populated in the decay of 130 Ce. Two new isomers with half-life of 77±10 ns and 17±5 ns were observed by means of delayed γ-γ coincidence measurements. (orig.). With 5 figs., 3 tabs

Predicting personal exposure of Windsor, Ontario residents to volatile organic compounds using indoor measurements and survey data

Science.gov (United States)

Stocco, Corinne; MacNeill, Morgan; Wang, Daniel; Xu, Xiaohong; Guay, Mireille; Brook, Jeff; Wheeler, Amanda J.

As part of a multi-year personal exposure monitoring campaign, we collected personal, indoor, and outdoor levels of 188 volatile organic compounds (VOCs). In 2005, data were obtained for 48 non-smoking adults from Windsor, Ontario in order to assess their exposure to VOCs based on their daily routines and characteristics of their homes. During the 8-week winter and summer sampling sessions, five repeated 24-h measurements were obtained for each home. This paper focuses on the analysis of 18 VOCs: 11 have been declared toxic as defined under the Canadian Environmental Protection Act, [1999. Statutes of Canada. Act assented to September 14, 1999. Ottawa: Queen's Printer. Available at Canada Gazette (Part III) 22(3): (Chapter 33). http://canadagazette.gc.ca/partIII/1999/g3-02203.pdf], and seven are commonly found in household and personal care products. Results of mixed effects models indicate that personal exposure to these VOCs can be largely predicted by indoor concentrations, with models including indoor concentrations found to have an r2 value for the fixed effects ranging from 58.4% to 87.2% for the CEPA toxic VOCs and from 41.7% to 90.1% for the commonly found VOCs. Given that people spend the majority of their time inside their home, characteristics of the home such as air exchange rates, type of garage, and type of stove have a greater potential to impact personal exposures.

Proximity effect of Pb on CeCu6 and La0.05Ce0.95Cu6

International Nuclear Information System (INIS)

Chen, T.P.; Tipparachi, U.; Yang, H.D.; Wang, J.T.; Chen, B.; Chen, J.C.J.

1999-01-01

Heavy fermion materials have attracted a great deal of attention since 1979. These materials which contain a rare earth (U, or Ce, etc.) element exhibit unusual behavior at low temperature. The effective mass m* of the Landau quasiparticles is found to be orders of magnitude higher than that of a bare electron. Some of the Heavy Fermion materials become superconductors at low temperature. The pairing of electrons in these superconductors may not be of s symmetry like those in BCS type superconductors. The mismatch in electronic mass and the difference in pairing state between the light conventional superconducting electrons and the heavy fermion electrons have brought the coupling between light electrons (BCS type) and the heavy fermion electrons into question. Proximity effect of Pb on CeCu 6 , Pb on La 0.05 Ce 0.95 Cu 6 , and Pb on Cu was used to investigate the coupling between the conventional superconducting electrons of Pb and the heavy electrons in CeCu 6 or La 0.05 Ce 0.95 Cu 6 . In this experiment proximity effect was found between Pb and CeCu 6 , as well as between Pb and La 0.05 Ce 0.95 Cu 6 . However, the proximity effect is small when compared with that between Pb and Cu. This indicates a much shorter extrapolation length in the heavy fermion materials than in Cu. Such a phenomenon can be explained by the mismatch in effective mass between the superconducting Pb electrons and the heavy fermion electrons

Knolls Atomic Power Laboratory environmental monitoring report, calendar year 1999

Energy Technology Data Exchange (ETDEWEB)

None

2000-12-01

The results of the effluent and environmental monitoring programs at the three Knolls Atomic Power Laboratory (KAPL) Sites are summarized and assessed in this report. Operations at the three KAPL Sites [Knolls Site, Niskayuna, New York; Kesselring Site, West Milton, New York; S1C Site, Windsor, Connecticut] during calendar year 1999 resulted in no significant release of hazardous substances or radioactivity to the environment. The effluent and environmental monitoring programs conducted by KAPL are designed to determine the effectiveness of treatment and control methods, to provide measurement of the concentrations in effluents for comparison with applicable standards, and to assess resultant concentrations in the environment. The monitoring programs include analyses of samples of liquid and gaseous effluents for chemical constituents and radioactivity as well as monitoring of environmental air, water, sediment, and fish. Radiation measurements are also made around the perimeter of each Site and at off-site background locations.

Knolls Atomic Power Laboratory environmental monitoring report, calendar year 1999

International Nuclear Information System (INIS)

2000-01-01

The results of the effluent and environmental monitoring programs at the three Knolls Atomic Power Laboratory (KAPL) Sites are summarized and assessed in this report. Operations at the three KAPL Sites [Knolls Site, Niskayuna, New York; Kesselring Site, West Milton, New York; S1C Site, Windsor, Connecticut] during calendar year 1999 resulted in no significant release of hazardous substances or radioactivity to the environment. The effluent and environmental monitoring programs conducted by KAPL are designed to determine the effectiveness of treatment and control methods, to provide measurement of the concentrations in effluents for comparison with applicable standards, and to assess resultant concentrations in the environment. The monitoring programs include analyses of samples of liquid and gaseous effluents for chemical constituents and radioactivity as well as monitoring of environmental air, water, sediment, and fish. Radiation measurements are also made around the perimeter of each Site and at off-site background locations

CE Challenges : Work to Do

NARCIS (Netherlands)

Stjepandic, J; Verhagen, W.J.C.; Wognum, P.M.

2015-01-01

CE has been used for more than two decades now. Despite many successes and advantages, there are still many challenges to be addressed. These challenges are both technical and organisational. In the paper we will address the current challenges of CE. Many challenges

Effects of geographical location and land use on atmospheric deposition of nitrogen in the State of Connecticut

International Nuclear Information System (INIS)

Luo, Yuzhou; Yang, Xiusheng; Carley, Robert J.; Perkins, Christopher

2003-01-01

High ambient concentrations of tropospheric nitrogen and dry deposition flux were found in urban areas. - A network of eight monitoring stations was established to study the atmospheric nitrogen concentration and deposition in the State of Connecticut. The stations were classified into urban, rural, coastal and inland categories to represent the geographical location and land use characteristics surrounding the monitoring sites. Nitrogen species including nitrate, ammonium, nitric acid vapor and organic nitrogen in the air and precipitation were collected, analyzed and used to infer nitrogen concentrations and dry and wet deposition flux densities for the sampling period from 1997 through 1999, with independently collected meteorological data. Statistical analyses were conducted to evaluate the spatial variations of atmospheric concentration and deposition fluxes of total nitrogen in Connecticut. A slightly higher atmospheric concentration of total nitrogen was observed along the Connecticut coastline of Long Island Sound compared to inland areas, while the differences of nitrogen deposition fluxes were insignificant between coastal and inland sites. The land use characteristics surrounding the monitoring sites had profound effects on the atmospheric nitrogen concentration and dry deposition flux. The ambient nitrogen concentration over the four urban sites was averaged 38.9% higher than that over the rural sites, resulting a 58.0% higher dry deposition flux in these sites compared to their rural counterparts. The local industrial activities and traffic emissions of nitrogen at urban areas had significant effects on the spatial distribution of atmospheric nitrogen concentration and dry deposition flux in the State. Wet and total deposition fluxes appeared to be invariant between the monitoring sites, except for high flux densities measured at Old Greenwich, a monitoring station near to and downwind of the New York and New Jersey industrial complexes

New Haven, Connecticut: Targeting Low-Income Household Energy Savings (City Energy: From Data to Decisions)

Energy Technology Data Exchange (ETDEWEB)

Strategic Priorities and Impact Analysis Team, Office of Strategic Programs

2017-11-01

This fact sheet "New Haven, Connecticut: Targeting Low-Income Household Energy Savings" explains how the City of New Haven used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

Density dependence, density independence, and recruitment in the American shad (Alosa sapidissima) population of the Connecticut River

International Nuclear Information System (INIS)

Leggett, W.C.

1977-01-01

The role of density-dependent and density-independent factors in the regulation of the stock-recruitment relationship of the American shad (Alosa sapidissima) population of the Connecticut River was investigated. Significant reductions in egg-to-adult survival and juvenile growth rates occurred in the Holyoke--Turners Falls region in response to increases in the intensity of spawning in this area. For the Connecticut River population as a whole, egg-to-adult survival was estimated to be 0.00056 percent at replacement levels, and 0.00083 percent at the point of maximum population growth. Density-independent factors result in significant annual deviations from recruitment levels predicted by the density-dependent model. Temperature and flow regimes during spawning and early larval development are involved, but they explain only a small portion (less than 16 percent) of the total variation. In spite of an extensive data base, the accuracy of predictions concerning the potential effects of additional mortality to pre-recruit stages is low. The implications of these findings for environmental impact assessment are discussed

Measuring chronic liver disease mortality using an expanded cause of death definition and medical records in Connecticut, 2004.

Science.gov (United States)

Ly, Kathleen N; Speers, Suzanne; Klevens, R Monina; Barry, Vaughn; Vogt, Tara M

2014-10-16

Chronic liver disease (CLD) is a leading cause of death and is defined based on a specific set of underlying cause-of-death codes on death certificates. This conventional approach to measuring CLD mortality underestimates the true mortality burden because it does not consider certain CLD conditions like viral hepatitis and hepatocellular carcinoma. We measured how much the conventional CLD mortality case definition will underestimate CLD mortality and described the distribution of CLD etiologies in Connecticut. We used 2004 Connecticut death certificates to estimate CLD mortality two ways. One way used the conventional definition and the other used an expanded definition that included more conditions suggestive of CLD. We compared the number of deaths identified using this expanded definition with the number identified using the conventional definition. Medical records were reviewed to confirm CLD deaths. Connecticut had 29 314 registered deaths in 2004. Of these, 282 (1.0%) were CLD deaths identified by the conventional CLD definition while 616 (2.1%) were CLD deaths defined by the expanded definition. Medical record review confirmed that most deaths identified by the expanded definition were CLD-related (550/616); this suggested a 15.8 deaths/100 000 population mortality rate. Among deaths for which hepatitis B, hepatitis C and alcoholic liver disease were identified during medical record review, only 8.6%, 45.4% and 36.5%, respectively, had that specific cause-of-death code cited on the death certificate. An expanded CLD mortality case definition that incorporates multiple causes of death and additional CLD-related conditions will better estimate CLD mortality. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

78 FR 75557 - CE FLNG, LLC, CE Pipeline, LLC; Notice of Intent To Prepare an Environmental Impact Statement for...

Science.gov (United States)

2013-12-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PF13-11-000] CE FLNG, LLC, CE Pipeline, LLC; Notice of Intent To Prepare an Environmental Impact Statement for the Planned CE FLNG Project, Request for Comments on Environmental Issues, and Notice of Public Scoping Meeting The staff of the Federal Energy Regulatory Commission ...

Inverted opal luminescent Ce-doped silica glasses

Directory of Open Access Journals (Sweden)

R. Scotti

2006-01-01

Full Text Available Inverted opal Ce-doped silica glasses (Ce : Si molar ratio 1 ⋅ 10−3 were prepared by a sol-gel method using opals of latex microspheres as templates. The rare earth is homogeneously dispersed in silica host matrix, as evidenced by the absence of segregated CeO2, instead present in monolithic Ce-doped SG with the same cerium content. This suggests that the nanometric dimensions of bridges and junctions of the host matrix in the inverted opal structures favor the RE distribution avoiding the possible segregation of CeO2.

XAFS Analysis of Local Structure around Ce in Ca3Sc2Si3O12:Ce Phosphor for White LEDs

International Nuclear Information System (INIS)

Akai, Toshio; Shigeiwa, Motoyuki; Okamoto, Kaoru; Shimomura, Yasuo; Kijima, Naoto; Honma, Tetsuo

2007-01-01

We have studied the local structure around Ce atom in Ca3Sc2Si3O12 host crystal, which has been developed as a new green phosphor for white light emitting diodes (LEDs). As the local structure and chemical environment of the dopant atom are very important to improve the performance of the phosphor, we have used XAFS to get chemical and structural information around the Ce dopant. The XANES spectrum of the Ce LIII-edge reveals that the Ce atom is trivalent in Ca3Sc2Si3O12. There are two kinds of possible Ce substitution sites, Ca site and Sc site, in garnet type Ca3Sc2Si3O12 crystal structure. The Ce atom is found to be at the Ca site in the host crystal by the comparison of the Fourier transform of Ce K-edge EXAFS spectrum with those of Ca and Sc K-edge EXAFS spectra. The theoretical analysis with FEFF also clarified the Ce substitution at the Ca site. Furthermore, the result of the analysis indicates the structural disorder around Ca and Si atoms at 3.75 A. It is possible that there are some defects around the Ca and Si atoms at 3.75 A to compensate the excess positive charge by introduced Ce3+ at the Ca2+ site

Synthesis and structural characterization of Ce-doped bismuth titanate

International Nuclear Information System (INIS)

Pavlovic, Nikolina; Srdic, Vladimir V.

2009-01-01

Ce-modified bismuth titanate nanopowders Bi 4-x Ce x Ti 3 O 12 (x ≤ 1) have been synthesized using a coprecipitation method. DTA/TG, FTIR, XRD, SEM/EDS and BET methods were used in order to investigate the effect of Ce-substitution on the structure, morphology and sinterability of the obtained powders. The phase structure investigation revealed that after calcinations at 600 deg. C powder without Ce addition exhibited pure bismuth titanate phase; however, powders with Ce (x = 0.25, 0.5 and 0.75) had bismuth titanate pyrochlore phase as the second phase. The strongest effect of Ce addition on the structure was noted for the powder with the highest amount of Ce (x = 1) having a cubic pyrochlore structure. The presence of pure pyrochlore phase was explained by its stabilization due to the incorporation of cerium ions in titanate structure. Ce-modified bismuth titanate ceramic had a density over 95% of theoretical density and the fracture in transgranular manner most probably due to preferable distribution of Ce in boundary region

A Science Framework for Connecticut River Watershed Sustainability

Science.gov (United States)

Rideout, Stephen; Nicolson, Craig; Russell-Robinson, Susan L.; Mecray, Ellen L.

2005-01-01

Introduction: This document outlines a research framework for water resource managers and land-use planners in the four-state Connecticut River Watershed (CRW). It specifically focuses on developing the decision-support tools and data needed by managers in the watershed. The purpose of the Science Framework is to identify critical research issues and information required to better equip managers to make decisions on desirable changes in the CRW. This Science Framework is the result of a cooperative project between the U.S. Geological Survey (USGS), the University of Massachusetts at Amherst (UMass-Amherst), and the U.S. Fish and Wildlife Service (FWS). The cooperative project was guided by a Science Steering Committee (SC) and included several focus groups, a 70-person workshop in September 2004, and an open collaborative process by which the workshop outcomes were synthesized, written up, and then progressively refined through peer review. This document is the product of that collaborative process.

Decommissioning cost recovery in the United States: lessons learned from Connecticut Yankee NPP

International Nuclear Information System (INIS)

Joosten, J.

1999-01-01

The international audience at ICONE-7 is already familiar with the roles of the owner and the NRC in ensuring the technical and safety performance goals of nuclear plant decommissioning. This paper addresses the role of the economic regulator since the pursuit of technical and safety goals must necessarily carry with them -a price tag- and owners must be concerned with the recovery of those costs. Answers to questions about how to pay and who should pay for decommissioning can very often influence nuclear power plant owner's decision-making. In the United States, most nuclear power plants are privately owned. Nevertheless, their owners are not totally free to determine the plant's economics or profitability. Instead, plant owners must sell their electricity to consumers in a regulated market wherein the price of electricity and terms of sale are controlled by the government. Under this regulatory regime, utilities are generally allowed to recover their investment costs -including decommissioning costs- provided that such costs are prudently, incurred. However, when an owner retires the plant prematurely, the prudence of his actions -up to and including the shutdown- are likely to be challenged. In 1997, for example, the owners of the Connecticut Yankee reactor faced a stiff challenge to the recovery of decommissioning costs when they shut down the plant ten years before license expiration. The Connecticut Yankee case thus provides valuable insights into the role of economic regulation on a nuclear plant's decommissioning strategy. (author)

Synthesis, extraction and electronic structure of Ce@C2n

Science.gov (United States)

Liu, Bing-Bing; Zou, Guang-Tian; Yang, Hai-Bin; Yu, San; Lu, Jin-Shan; Liu, Zi-Yang; Liu, Shu-Ying; Xu, Wen-Guo

1997-11-01

In view of the growing interest in endohedral lanthanide fullerenes, Ce, as a typical+ 4 oxidation state lanthanide element, has been systematically studied. The synthesis, extraction and electronic structure of Ce @ C2n are investigated. Soot containing Ce@C2n was synthesized in high yield by carbonizing CeO2-containing graphite rods and are back-burning the CeC2-enriched cathode deposit in a DC arc plasma apparatus. Ce@C2n dominated by Ce@C82, can be efficiently extracted from the insoluble part of the soot after toluene Soxhlet extraction by pyridine at high temperature and high pressure in a closed vessel. About 60% Ce@C2n(2n = 82, 80, 78, 76) and 35% Ce@C82 can be enriched in the pyridine extract. This fact is identified by desorption electron impact mass spectrometry (DEI MS). The electronic structure of Ce@C2n is analyzed by using X-ray photoemission spectroscopy (XPS) of pyridine-free film. It is suggested that the encapsulated Ce atom is in a charge state close to+ 3 and was effectively protected from reaction with water and oxygen by the enclosing fullerene cage. Unlike theoretical expectation, the electronic state of Ce@C82 is formally described as Ce+3@C3-82.

Connecticut's Value-Based Insurance Plan Increased The Use Of Targeted Services And Medication Adherence.

Science.gov (United States)

Hirth, Richard A; Cliff, Elizabeth Q; Gibson, Teresa B; McKellar, M Richard; Fendrick, A Mark

2016-04-01

In 2011 Connecticut implemented the Health Enhancement Program for state employees. This voluntary program followed the principles of value-based insurance design (VBID) by lowering patient costs for certain high-value primary and chronic disease preventive services, coupled with requirements that enrollees receive these services. Nonparticipants in the program, including those removed for noncompliance with its requirements, were assessed a premium surcharge. The program was intended to curb cost growth and improve health through adherence to evidence-based preventive care. To evaluate its efficacy in doing so, we compared changes in service use and spending after implementation of the program to trends among employees of six other states. Compared to employees of other states, Connecticut employees were similar in age and sex but had a slightly higher percentage of enrollees with chronic conditions and substantially higher spending at baseline. During the program's first two years, the use of targeted services and adherence to medications for chronic conditions increased, while emergency department use decreased, relative to the situation in the comparison states. The program's impact on costs was inconclusive and requires a longer follow-up period. This novel combination of VBID principles and participation requirements may be a tool that can help plan sponsors increase the use of evidence-based preventive services. Project HOPE—The People-to-People Health Foundation, Inc.

Ferroelectric relaxor Ba(TiCe)O3

International Nuclear Information System (INIS)

Chen Ang; Zhi Jing; Yu Zhi

2002-01-01

The dielectric behaviour of Ba(Ti 1-y Ce y )O 3 solid solutions (y=0-0.3) has been studied. A small amount of Ce doping (y=0.02) has weak influence on the dielectric behaviour of Ba(Ti 1-y Ce y )O 3 . With increasing Ce concentration, three phase transitions of pure BaTiO 3 are pinched into one rounded dielectric peak with frequency dispersion, and the relaxation time follows the Vogel-Fulcher relation. The evolution from a normal ferroelectric to a ferroelectric relaxor is emphasized. High strains (S=∼0.1-0.19%) with a small hysteresis under ac fields are obtained in ferroelectric relaxors Ba(Ti 1-y Ce y )O 3 . The physical mechanism of the relaxation process, the pinching effect of the phase transitions and their influence on the ferroelectric and electrostrictive behaviour are discussed. (author)

NMR study of CeCoSi3

International Nuclear Information System (INIS)

Iwamoto, Y.

1995-01-01

Low-temperature susceptibility, NMR and NQR of the 59 Co signal in CeCoSi 3 have been measured. CeCoSi 3 showed a superconducting transition at 0.7-1.2K. From NQR measurement, the nuclear quadrupole frequency and the full width at half maximum (FWHM) of 59 Co in CeCoSi 3 were estimated to be about 1.08MHz and 0.08MHz, respectively. The 59 Co nuclear spin-lattice relaxation rate (1/T 1 ) in CeCoSi 3 was proportional to the temperature (T) as the Fermi liquid state above the superconducting transition temperature (T c ), and then rapidly decreased below T c . ((orig.))

Distribution and Translocation of 141Ce (III) in Horseradish

Science.gov (United States)

Guo, Xiaoshan; Zhou, Qing; Lu, Tianhong; Fang, Min; Huang, Xiaohua

2007-01-01

Background and Aims Rare earth elements (REEs) are used in agriculture and a large amount of them contaminate the environment and enter foods. The distribution and translocation of 141Ce (III) in horseradish was investigated in order to help understand the biochemical behaviour and toxic mechanism of REEs in plants. Method The distribution and translocation of 141Ce (III) in horseradish were investigated using autoradiography, liquid scintillation counting (LSC) and electron microscopic autoradiography (EMARG) techniques. The contents of 141Ce (III) and nutrient elements were analysed using an inductively coupled plasma-atomic emission spectrometer (ICP-AES). Results The results from autoradiography and LSC indicated that 141Ce (III) could be absorbed by horseradish and transferred from the leaf to the leaf-stalk and then to the root. The content of 141Ce (III) in different parts of horseradish was as follows: root > leaf-stalk > leaf. The uptake rates of 141Ce (III) in horseradish changed with the different organs and time. The content of 141Ce (III) in developing leaves was greater than that in mature leaves. The results from EMARG indicated that 141Ce (III) could penetrate through the cell membrane and enter the mesophyll cells, being present in both extra- and intra-cellular deposits. The contents of macronutrients in horseradish were decreased by 141Ce (III) treatment. Conclusions 141Ce (III) can be absorbed and transferred between organs of horseradish with time, and the distribution was found to be different at different growth stages. 141Ce (III) can enter the mesophyll cells via apoplast and symplast channels or via plasmodesmata. 141Ce (III) can disturb the metabolism of macronutrients in horseradish. PMID:17921527

Phytophthora species recovered from the Connecticut River Valley in Massachusetts, USA.

Science.gov (United States)

Brazee, Nicholas J; Wick, Robert L; Hulvey, Jonathan P

2016-01-01

Little is currently known about the assemblage of Phytophthora species in northeastern North America, representing a gap in our understanding of species incidence. Therefore, Phytophthora species were surveyed at 20 sites in Massachusetts, with 16 occurring in the Connecticut River Valley. Many of the sampled waterways were adjacent to active agricultural lands, yet were buffered by mature floodplain forests composed of Acer, Platanus, Populus and Ulmus. Isolates were recovered with three types of baits (rhododendron leaves, pear, green pepper) in 2013 and water filtration in 2014. Overall, 457 isolates of Phytophthora were recovered and based on morphological characters and rDNA internal transcribed spacer (ITS), β-tubulin (β-tub) and cytochrome oxidase c subunit I (cox1) sequences, 18 taxa were identified, including three new species: P. taxon intercalaris, P. taxon caryae and P. taxon pocumtuck. In addition, 49 isolates representing five species of Phytopythium also were identified. Water filtration captured a greater number of taxa (18) compared to leaf and fruit baits (12). Of the three bait types rhododendron leaves yielded the greatest number of isolates and taxa, followed by pear and green pepper, respectively. Despite the proximity to agricultural lands, none of the Phytophthora species baited are considered serious pathogens of vegetable crops in the region. However, many of the recovered species are known woody plant pathogens, including four species in the P. citricola s.l. complex that were identified: P. plurivora, P. citricola III, P. pini and a putative novel species, referred to here as P. taxon caryae. An additional novel species, P. taxon pocumtuck, is a close relative of P. borealis based on cox1 sequences. The results illustrate a high level of Phytophthora species richness in the Connecticut River Valley and that major rivers can serve as a source of inoculum for pathogenic Phytophthora species in the northeast. © 2016 by The Mycological

Traducerea: între ce se poate traduce și ce trebuie tradus

Directory of Open Access Journals (Sweden)

Magda Jeanrenaud

2016-02-01

Full Text Available Pornind de la o tulburătoare interpretare a lui Jacques Derrida, studiul de față își propune să investigheze și încearcă să explice blocajul ce intervine în versiunile englezești, franceze și românești (semnate de Antoine Berman, Alexis Nouss, Steven Rendall, Catrinel Pleșu etc. ale celebrului text al lui Walter Benjamin, Die Aufgabe des Übersetzers, atunci cînd traducătorii transpun în cele trei limbi țintă cele două citate cuprinse în acesta: un citat din Mallarmé, lăsat netradus de Benjamin însuși, și un altul, din Pannwitz. Într-un fel sau altul, ambele citate au o formă discursivă ce lasă să se întrevadă o sintaxă ce se abate deliberat de la normă, ca și cum ar fi deja niște „traduceri”. Analiza mai pune în evidență și comportamentul (cumva o dominantă a psihologiei traducătorilor? celor ce au transpus textul benjaminian, comportament marcat de obsesia lizibilității văzută ca o trăsătură congenitală a oricărei traduceri, chiar și atunci cînd textul original nu tinde spre aceasta. De unde și dilema, dureroasă, legată de spinoasa chestiune a intenționalității textului (nu doar de tradus...

SELF-ASSEMBLY CE OXIDE/ORGANOPOLYSILOXANE COMPOSITE COATINGS.

Energy Technology Data Exchange (ETDEWEB)

SUGAMA,T.; SABATINI,R.; GAWLIK,K.

2005-01-01

A self-assembly composite synthesis technology was used to put together a Ce(OH){sub 3}-dispersed poly-acetamide-acetoxyl methyl-propylsiloxane (PAAMPA) organometallic polymer. Three spontaneous reactions were involved; condensation, amidation, and acetoxylation, between the Ce acetate and aminopropylsilane triol (APST) at 150 C. An increase in temperature to 200 C led to the in-situ phase transformation of Ce(OH){sub 3} into Ce{sub 2}O{sub 3} in the PAAMPA matrix. A further increase to 250 C caused oxidative degradation of the PAAMPA, thereby generating copious fissures in the composite. We assessed the potential of Ce(OH){sub 3}/ and Ce{sub 2}O{sub 3}/ PAAMPA composite materials as corrosion-preventing coatings for carbon steel and aluminum. The Ce{sub 2}O{sub 3} composite coating displayed better performance in protecting both metals against NaCl-caused corrosion than did the Ce(OH){sub 3} composite. Using this coating formed at 200 C, we demonstrated that the following four factors played an essential role in further mitigating the corrosion of the metals: First was a minimum susceptibility of coating's surface to moisture; second was an enhanced densification of the coating layer; third was the retardation of the cathodic oxygen reduction reaction at the metal's corrosion sites due to the deposition of Ce{sub 2}O{sub 3} as a passive film over the metal's surface; and, fourth was its good adherence to metals. The last two factors contributed to minimizing the cathodic delamination of coating film from the metal's surface. We also noted that the affinity of the composite with the surface of aluminum was much stronger than that with steel. Correspondingly, the rate of corrosion of aluminum was reduced as much as two orders of magnitude by a nanoscale thick coating. In contrast, its ability to reduce the corrosion rate of steel was lower than one order of magnitude.

Resonant photoemission study of CeRu4Sb12

International Nuclear Information System (INIS)

Ishii, Hiroyoshi; Miyahara, Tsuneaki; Takayama, Yasuhiro; Shiozawa, Hidetsugu; Obu, Kenji; Matsuda, Tatsuma D.; Aoki, Yuji; Sugawara, Hitoshi; Sato, Hideyuki

2005-01-01

We have measured the Ce 4d-4f and Ce 3d-4f resonant photoemission spectra of CeRu 4 Sb 12 . The Ce 4f spectra show the spectral features corresponding to a weakly hybridized system. The number of 4f electrons is estimated to be ∼1.0

Preparation and luminescence properties of Ce3+ and Ce3+/Tb(3+)-activated Y4Si2O7N2 phosphors.

Science.gov (United States)

Xia, Zhiguo; Wu, Weiwei

2013-09-28

Ce(3+) and Ce(3+)/Tb(3+)-activated Y4Si2O7N2 phosphors are synthesized by the solid-state method, which can be efficiently excited by near ultraviolet (UV) light emitting diode (LED) chips. The PL spectrum of Y4Si2O7N2:Ce(3+) shows a broad hump between 380 and 650 nm, assigned to the electron transition from the 4f energy level to different 5d sub levels of the Ce(3+) ions at different Y(3+) sites. The color of the Y4Si2O7N2:Ce(3+) phosphor can shift from blue to green by introducing Tb(3+). In addition, the energy transfer process from Ce(3+) to Tb(3+) in the Y4Si2O7N2 host was investigated and discussed in terms of both the luminescence spectra and decay curves. The energy transfer critical distance has been calculated and evaluated by the concentration quenching method. Therefore, the Ce(3+) and Ce(3+)/Tb(3+)-activated Y4Si2O7N2 phosphors can serve as key materials for phosphor-converted white-light UV-LEDs.

Ethanol Sensor of CdO/Al2O3/CeO2 Obtained from Ce-DOPED Layered Double Hydroxides with High Response and Selectivity

Science.gov (United States)

Xu, Dongmei; Guan, Meiyu; Xu, Qinghong; Guo, Ying; Wang, Yao

2013-04-01

In this paper, Ce-doped CdAl layered double hydroxide (LDH) was first synthesized and the derivative CdO/Al2O3/CeO2 composite oxide was prepared by calcining Ce-doped CdAl LDH. The structure, morphology and chemical state of the Ce doped CdAl LDH and CdO/Al2O3/CeO2 were also investigated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), solid state nuclear magnetic resonance (SSNMR), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The gas sensing properties of CdO/Al2O3/CeO2 to ethanol were further studied and compared with CdO/Al2O3 prepared from CdAl LDH, CeO2 powder as well as the calcined Ce salt. It turns out that CdO/Al2O3/CeO2 sensor shows best performance in ethanol response. Besides, CdO/Al2O3/CeO2 possesses short response/recovery time (12/72 s) as well as remarkable selectivity in ethanol sensing, which means composite oxides prepared from LDH are very promising in gas sensing application.

Luminescent and scintillation properties of the Ce3+ doped Y3−xLuxAl5O12:Ce single crystalline films

International Nuclear Information System (INIS)

Zorenko, Yu.; Gorbenko, V.; Zorenko, T.; Popielarski, P.; Mosińska, L.; Fedorov, A.

2016-01-01

The work is related to the investigation of scintillation and luminescent properties of single crystalline films (SCF) of solid solutions of Ce 3+ doped Y 3−x Lu x Al 5 O 12 :Ce garnets with x value in the 0–3 range. We have shown a possibility of realization of high-energy shift of the Ce 3+ ion emission spectrum in these garnets up to 22 nm. We have also found that the light yield of the radioluminescence under α-particle excitation of LuAG:Ce SCF can exceed by 1.3 times the corresponding values for the YAG:Ce SCF counterpart. For investigation of the luminescent properties of Y 3−x Lu x Al 5 O 12 :Ce SCF at different x values the luminescent spectroscopy of these SCFs under excitation by synchrotron radiation in the VUV range was performed. - Highlights: • Single crystalline films of Y 3−x Lu x Al 5 O 12 garnets at x=0–3.0 were grown by LPE method onto YAG substrates. • Lattice constant of Y 3−x Lu x Al 5 O 12 :Ce film and the film/substrate misfit changed linearly with increasing of Lu content in the x=0–3.0 range. • High-energy shift of the Ce 3+ emission up to 22 nm in Y 3−x Lu x Al 5 O 12 film with increasing of Lu content in the x=0–3.0 range. • Light yield of Y 3−x Lu x Al 5 O 12 :Ce film decreases in the x=0–1.8 range and increases in the x=1.8–3.0 range. • Scintillation LY of Lu 3 Al 5 O 12 :Ce film can exceed by 1.3 times the LY for YAG:Ce film counterpart.

NOAA Digital Oblique Imagery Collection for the Coasts of Main/New Hampshire, Massachusetts/Rhode Island/Connecticut, and Hudson River/Long Island /NY/NJ

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Project: NOAA Digital Orthophotography and Ancillary Oblique Imagery Collection for the Coasts of Main/New Hampshire, Massachusetts/Rhode Island/Connecticut, and...

Homogeneously dispersed CeO2 nanoparticles on exfoliated hexaniobate nanosheets

Science.gov (United States)

Marques, Thalles M. F.; Strayer, Megan E.; Ghosh, Anupama; Silva, Alexandre; Ferreira, Odair P.; Fujisawa, Kazunori; Alves da Cunha, Jose R.; Abreu, Guilherme J. P.; Terrones, Mauricio; Mallouk, Thomas E.; Viana, Bartolomeu C.

2017-12-01

Hexaniobate nanosheets derived from the parent compound K4Nb6O17 have been decorated with CeO2 nanoparticles by ion exchange with aqueous cerium (IV) solution. Very homogeneous CeO2 nanoparticle decoration of the hexaniobate sheets can be achieved by this method and the resulting composites may absorb visible light. HRTEM images show that ∼3.0 nm diameter CeO2 nanoparticles adhere to hexaniobate nanosheets that are exfoliated and then restacked prior to Ce deposition. The interfacial interaction between CeO2 nanoparticles and nanosheets would be due to an electrostatic attraction mechanism. Raman and XRD measurements have given strong evidence that CeO2 nanoparticles have fluorite structure. EDS, FTIR and XPS results suggest almost complete exchange of TBA+ and K+ by Ce4+. Cerium ion exchange on the acid exchanged parent compound, H2.9K1.1Nb6O17, revealed that the extent of Ce ion exchange is much greater in case of nanosheets, which may be rationalized by the larger surface area available after exfoliation. XPS measurements show that the ratio of Ce4+/Ce3+ is around 4.4, in agreement with the formation of fluorite structure (CeO2). Thus, these CeO2 nanoparticle/nanosheet composites may be useful for catalytic processes.

Electro-regeneration of Ce(IV) in real spent Cr-etching solutions

International Nuclear Information System (INIS)

Chen, Te-San; Huang, Kuo-Lin

2013-01-01

Highlights: • An electrochemical process is used to regenerate Ce(IV) in real (hazardous) spent TFT-LCD Cr-etching solutions. • The Ce(IV) yield on tested anodes was in order BDD > Pt > DSA. • A Neosepta CMX separator was better than Nafion ones to be used in the process. • The activation energy on Pt was 10.7 kJ/mol. • The obtained parameters are useful to design reactors for 100% Ce(IV) regeneration in real spent Cr-etching solutions. -- Abstract: This paper presents the electro-regeneration of Ce(IV) in real (hazardous) spent thin-film transistor liquid-crystal display (TFT-LCD) Cr-etching solutions. In addition to Ce(III) > Ce(IV) in diffusivity, a quasi-reversible behavior of Ce(III)/Ce(IV) was observed at both boron-doped diamond (BDD) and Pt disk electrodes. The Ce(IV) yield on Pt increased with increasing current density, and the best current efficiency (CE) was obtained at 2 A/2.25 cm 2 . The performance in terms of Ce(IV) yield and CE of tested anodes was in order BDD > Pt > dimensional stable anode (DSA). At 2 A/2.25 cm 2 on Pt and 40 °C for 90 min, the Ce(IV) yield, CE and apparent rate constant (k) for Ce(III) oxidation were 81.4%, 21.8% and 3.17 × 10 −4 s −1 , respectively. With the increase of temperature, the Ce(IV) yield, CE, and k increased (activation energy = 10.7 kJ/mol), but the specific electricity consumption decreased. The Neosepta CMX membrane was more suitable than Nafion-117 and Nafion-212 to be used as the separator of the Ce(IV) regeneration process. The obtained parameters are useful to design divided batch reactors for the Ce(IV) electro-regeneration in real spent Cr-etching solutions

Loparite-(Ce) from the Khibiny Alkaline Pluton, Kola Peninsula, Russia

Science.gov (United States)

Konopleva, N. G.; Ivanyuk, G. Yu.; Pakhomovsky, Ya. A.; Yakovenchuk, V. N.; Mikhailova, Yu. A.

2017-12-01

Data on the occurrence, morphology, anatomy, composition, and formation conditions of loparite-(Ce) in the Khibiny alkaline pluton are given. Loparite-(Ce), (Na,Ce,Sr)(Ce,Th)(Ti,Nb)2O6, resulted from metasomatic alteration and assimilation of metamorphic host rocks at the contact with foyaite as well as foyaite on the contact with foidolite. This alteration was the highest in pegmatite, and albitite developed there. A decrease in temperature resulted in enrichment of the perovskite and tausonite endmembers in loparite-(Ce) owing to a decrease in the loparite and lueshite endmembers. La and Ce sharply predominate among rare earth elements in the composition of loparite-(Ce).

Single-crystal FCC and DHCP phases in Ce/Pr superlattices

International Nuclear Information System (INIS)

Lee, S.; Goff, J.P.; Ward, R.C.C.; Wells, M.R.; McIntyre, G.J.

2002-01-01

Cerium usually comprises a mixture of polycrystalline FCC and DHCP allotropes. Single-crystal Ce has been stabilised in Ce/Pr superlattices grown using molecular beam epitaxy. It is found that FCC or DHCP phases can be obtained depending on superlattice composition and growth conditions. Low-temperature neutron scattering was performed on Ce/Pr samples using the triple-axis spectrometer D10 at the ILL. Such measurements revealed one sample, [Ce 20 Pr 20 ] 60 , to be a single crystal with a DHCP unit cell; while another, [Ce 30 Pr 10 ] 56 , was a mixture of FCC and DHCP phases. Antiferromagnetic ordering of magnetic moments was observed in the DHCP sample (T N =11.1 K) with a magnetic structure similar to that found in bulk β-Ce. Surprisingly, the magnetic ordering was found to be confined to single Ce blocks. Furthermore, it was found that, at low temperatures, the lattice contraction observed for bulk FCC Ce was suppressed in Ce/Pr superlattices. (orig.)

Facile hydrothermal synthesis of CeO 2 nanopebbles

Indian Academy of Sciences (India)

Cerium oxide (CeO2) nanopebbles have been synthesized using a facile hydrothermal method. X-ray diffraction pattern (XRD) and transmission electron microscopy analyses confirm the presence of CeO2 nanopebbles. XRD shows the formation of cubic fluorite CeO2 and the average particle size estimated from the ...

CEF-scheme of a semimetal Ce3Sn7

International Nuclear Information System (INIS)

Okuda, Yusuke; Yamamoto, Takeshi; Honda, Daisuke; Shishido, Hiroaki; Galatanu, Andrei; Haga, Yoshinori; Matsuda, Tatsuma D.; Takeuchi, Tetsuya; Kindo, Koichi; Sugiyama, Kiyohiro; Settai, Rikio; O-bar nuki, Yoshichika

2005-01-01

We measured the magnetic susceptibility and magnetization of an antiferromagnet Ce 3 Sn 7 with the orthorhombic crystal structure. The experimental data are found to be well explained on the basis of the crystalline electric field (CEF) 4f-scheme under the assumption that two Ce atoms in the 2(a) site possess a magnetic moment of 0.36μ B /Ce and one Ce atom in the 4(i) site possesses no magnetic moment as in a valence fluctuating compound CeSn 3 , which was previously proposed by Bonnet et al. Furthermore, we carried out the de Haas-van Alphen experiment. The detected Fermi surfaces are many in number but are extremely small in volume, indicating that Ce 3 Sn 7 is a semimetal

Tunable colorimetric performance of Al{sub 2}O{sub 3}-YAG:Ce{sup 3+} eutectic crystal by Ce{sup 3+} concentration

Energy Technology Data Exchange (ETDEWEB)

Sai, Qinglin, E-mail: saiql@siom.ac.cn; Xia, Changtai, E-mail: xia_ct@siom.ac.cn

2017-06-15

Ce-doped Al{sub 2}O{sub 3}-YAG eutectics with different percentage of Ce were successfully grown by the optical floating zone technique. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the structure. The results show that they have typical eutectic structure of interpenetrating sapphire and garnet phases with the tens of microns lamella spacing. The photoluminescence spectra of the eutectics showed that they have wide excitation band, and samples with 1.6 mol% Ce-doped has the highest emission intensity. The eutectic-packaged LED has high luminous efficiency and its color can be modulated by changing Ce concentration. The results reveal that Ce-doped Al{sub 2}O{sub 3}-YAG eutectic is a promising phosphor for white LED applications.

CeO2-ZrO2 ceramic compounds

International Nuclear Information System (INIS)

Melo, F.C.L.; Cairo, C.A.C.; Devezas, T.C.; Nono, M.C.A.

1988-01-01

In order to study the mechanical properties of tetragonal polycrystal zirconia stabilized with ceria various powder compositions with different CeO 2 content were made. Modulus of rupture for those compounds was measured. Tetragonal retained phase was determined for samples of CeO 2 -ZrO 2 ceramics with and without superficial mechanical treatment. The experimental results allowed us to evaluate the effects of CeO 2 content and sintering temperature in the mechanical properties and tetragonal transformed phase (t→ m) in ceramics of CeO 2 -ZrO 2 systems. (author) [pt

Measurement of Ce(IV) Concentration in Foam Decontaminant containing Fluorosurfactant

Energy Technology Data Exchange (ETDEWEB)

Jung, Chong Hun; Yang, H. B.; Yoon, I. H.; Choi, W. K.; Moon, J. K. [KAERI, Daejeon (Korea, Republic of); Lee, J. S. [Gachon University, Seongnam (Korea, Republic of)

2016-05-15

To improve the stability of the foam, surfactants and inorganic materials such as nanoparticles can be added. A nanoparticle-based foam decontaminant is composed of a surfactant and nanoparticles for the generation and maintenance of foam, and a chemical decontamination agent made of Ce(IV) dissolved in nitric acid. Ce(IV) will be reduced to Ce(III) through the decontamination process. Oxidizing the cerium (III) can be reused as a decontamination agent, Ce(IV). Oxidation treatment technology by ozone uses its strong oxidizing power. It can be regarded as an environmentally friendly process, because ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site, and used ozone can be decomposed immediately. A concentration analysis of Ce(IV) in foam decontaminant containing a surfactant is necessary prior to the derivation of optimal conditions for the regeneration of Ce(III) through ozonation treatment. A UV spectrometric method using the absorbance or potentiometric method with a potential difference in Ce(III)/Ce(IV), or a potentiometric titration method using Fe (II), can be used for a Ce(IV) concentration analysis. A UV spectrometric method has a problem receiving the influence of the surfactant, and a potentiometric method is difficult to use because of the problem of an insignificant change in the potential difference value of the Ce(III)/Ce(IV). Thus, the present study was undertaken to determine whether the potentiometric titration method can be used for an analysis of the Ce(IV) concentration in the nanoparticle-based foam decontaminant containing surfactant. It will be effectively used for the Ce(IV) concentration measurement, in relation to the subsequent research on the derivation of optimal conditions for the regeneration of Ce(III) through ozonation treatment.

Toxicity of inhaled 144CeCl3 in beagle dogs

International Nuclear Information System (INIS)

Muggenburg, B.A.; Hahn, F.F.; Boecker, B.B.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The metabolism, dosimetry and effects of inhaled 144 CeCl 3 in beagle dogs are being studied to assess the biological consequences of inhaling 144 Ce. Studies have shown that the 144 Ce deposited in the lung as 144 CeCl 3 is translocated at a moderately rapid rate to liver and skeleton and that significant radiation doses are accumulated by all three organs. Fifty-five dogs that inhaled 144 CeCl 3 and 17 control dogs are being observed for their life span. The 144 Ce-exposed dogs had long-term retained burdens that ranged from 2.6 to 360 μCi 144 Ce/kg body weight. Fifty-three of the dogs exposed to 144 CeCl 3 have died and twelve control dogs have died. Serial observations are continuing on the two surviving exposed dogs and five control dogs

Physical, biochemical and genetic characterization of enterocin CE5-1 produced by Enterococcus faecium CE5-1 isolated from Thai indigenous chicken intestinal tract

Directory of Open Access Journals (Sweden)

Kraiyot Saelim

2015-06-01

Full Text Available Enterocin CE5-1 produced by Enterococcus faecium CE5-1 isolated from the chicken gastrointestinal tract was active in the wide range of pH 2-10 and temperature 30-100°C and sensitive to proteolytic enzymes and -amylase. It remained active after storage at -20°C for 2 months. Moreover, enterocin CE5-1 showed antibacterial activity against lactobacilli, bacilli, listeria, staphylococci and enterococci, especially antibiotic-resistant enterococci. In vitro study of enterocin CE5-1 decreased the population of Ent. faecalis VanB from 6.03 to 4.03 log CFU/ml. The lethal mode of action of enterocin CE5-1 appeared to be pore and filament formation in the cell wall. PCR sequencing analysis revealed the presence of two open reading frames (ORFs, containing enterocin CE5-1 (entCE5-1 and enterocin immunity (entI gene. Therefore, enterocin CE5-1 from Ent. faecium CE5-1 could possibly be used as an antimicrobial agent to control foodborne pathogen, spoilage bacteria and antibiotic-resistant enterococci in foods, feeds and the environments.

Itinerant f-electron behavior in Ce and U compounds

International Nuclear Information System (INIS)

Crabtree, G.W.

1985-04-01

The experimentally observed Fermi surface properties in URh 3 , UIr 3 , UGe 3 , CeSn 3 , CeB 6 , U 3 As 4 , U 3 P 4 , and CeSb are reviewed. For the compounds with no magnetic order, band structure models of the Fermi surface geometry are confirmed and f-ligand hybridization is found to be dominant. For CeB 6 , U 3 As 4 , and U 3 P 4 the experiments show that both local moments and f hybridization are important. In CeSb new data can be explained by a purely local model with no f-hybridization

Joint Regulation of Radionuclides at Connecticut Yankee Haddam Neck Plant - Finding Common Ground and Lessons Learned

International Nuclear Information System (INIS)

Peters, J.; Glucksberg, N.; Fogg, A.; Couture, B.

2006-01-01

During the site closure of nuclear facilities where both radionuclides and chemicals are present in environmental media, state and federal regulatory agencies other than the Nuclear Regulatory Commission often have a stake in the regulation of the site closure process. At the Connecticut Yankee Atomic Power Company (CYAPCO) Haddam Neck Plant in Haddam, Connecticut, the site closure process includes both radiological and chemical cleanup which is regulated by two separate divisions within the state and two federal agencies. Each of the regulatory agencies has unique closure criteria which pertain to radionuclides and, consequently, there is overlapping and in some cases disparate regulation of radionuclides. Considerable effort has been expended by CYAPCO to find common ground in meeting the site closure requirements for radionuclides required by each of the agencies. This paper discusses the approaches that have been used by CYAPCO to address radionuclide site closure requirements. Significant lessons learned from these approaches include the demonstration that public health cleanup criteria for most radionuclides of concern at nuclear power generation facilities are protective for chemical toxicity concerns and are protective for ecological receptors and, consequently, performing a baseline ecological risk assessment for radionuclides at power generation facilities is not generally necessary. (authors)

Structure and phase composition of Al-Ce-Cu system alloys in range of quasi-binary Al-Al8CeCu4 section

International Nuclear Information System (INIS)

Belov, N.A.; Khvan, A.V.

2007-01-01

The phase diagram of the Al-Cu-Ce system in the quasibinary section area of Al-Al 8 CeCu 4 has been investigated by metallographic, thermal, micro-X-ray spectral and X-ray structural analyses. The parameters of the eutectic reaction L→(Al)+CeCu 4 Al 8 : T=610 Deg C were found out; the composition was 14% Cu and 7% Ce. This eutectics is of a disperse structure and the ternary compound contained is capable of fragmentation and spheroidizing in the heating process (starting from 540 Deg C). It was demonstrated that the area of optimal (Al)+CeCu 4 Al 8 eutectics-based alloy compositions was within the narrow limits. That is related to the fact that at a comparatively little variation of the Cu:Ce=2 ratio solidus sharply decreases and, as a result, the crystallization interval considerably extends [ru

Industrial application of fluidized bed combustion. Phase I, task 4: sub-scale unit testing and data analysis. Volume I. Final report

Energy Technology Data Exchange (ETDEWEB)

Goodstine, S.L.; Accortt, J.I.; Harris, R.D.; Kantersaria, P.P.; Matthews, F.T.; Jones, B.C.; Jukkola, G.D.

1979-12-01

Combustion Engineering, under contract with the Department of Energy, has developed, designed, and is constructing a 50,000 lbs steam/hr Industrial FBC Demonstration Plant. The plant will provide steam for space heating at the Great Lakes Naval Base in North Chicago, Illinois. Its operation will enable industry to objectively appraise the performance, reliability, and economics of FBC technology. A hot sub-scale unit (SSU), simulating the operating conditions of the demonstration plant, has been constructed and operated at Combustion Engineering's Kreisinger Development Laboratory in Windsor, Connecticut. The SSU facility has served as a valuable developmental tool in establishing the performance characteristics of the FBC process and equipment as used in the larger Demonstration Plant. Experience gained during more than 2000 hours of operation, including the analytical results derived from an extensive test program of 1500 hours operation, has defined problems and identified solutions in engineering the larger FBC Demonstration Plant. This report presents documentation of the results of the SSU test program.

The Forests of Southern New England, 2007: A report on the forest resources of Connecticut, Massachusetts, and Rhode Island

Science.gov (United States)

Brett J. Butler; Charles J. Barnett; Susan J. Crocker; Grant M. Domke; Dale Gormanson; William N. Hill; Cassandra M. Kurtz; Tonya Lister; Christopher Martin; Patrick D. Miles; Randall Morin; W. Keith Moser; Mark D. Nelson; Barbara O' Connell; Bruce Payton; Charles H. Perry; Ronald J. Piva; Rachel Riemann; Christopher W. Woodall

2011-01-01

This report summarizes the results of the fifth forest inventory of the forests of Southern New England, defined as Connecticut, Massachusetts, and Rhode Island, conducted by the U.S. Forest Service, Forest Inventory and analysis program. Information on forest attributes, ownership, land use change, carbon, timber products, forest health, and statistics and quality...

Microstructures and luminescent properties of Ce-doped transparent mica glass-ceramics

International Nuclear Information System (INIS)

Taruta, Seiichi; Iwasaki, Yoshitomo; Nishikiori, Hiromasa; Yamakami, Tomohiko; Yamaguchi, Tomohiro; Kitajima, Kunio; Okada, Kiyoshi

2012-01-01

Highlights: ► Ce-doped transparent glass-ceramics and their parent glasses. ► TEM and STEM images for the microstructures. ► Each mica crystal did not contain Ce uniformly. ► Emission due to Ce 3+ ions in the glass phase and/or Ce 3+ ions in the mica crystals. - Abstract: Transparent mica glass-ceramics were prepared by heating parent glasses that had been doped with 0.5–15 mol% CeO 2 . During the melting and heat treatment, Ce 4+ ions in the specimens were reduced to Ce 3+ ions, and one or both of these ion species were then replaced with Li + ions in the interlayers of the separated mica crystals. However, scanning transmission electron microscope (STEM) and Z-contrast imaging revealed that the mica crystals did not contain the same amount of Ce. On excitation at 254 nm, the parent glasses and glass-ceramics emitted blue light, which originated from the 5d to 4f transition of the Ce 3+ ions. The emission of the glass-ceramic containing a smaller amount of Ce was attributed to the Ce 3+ ions in both the glass phase and the mica crystals, whereas that of the glass-ceramics containing a larger amount of Ce was caused mainly by Ce 3+ ions in the mica crystals. The dependence of the emission band of the parent glasses on the amount of Ce was a unique feature of the Ce-doped transparent mica glass-ceramics and was not observed in previous studies of Eu-doped parent glasses and mica glass-ceramics.

Metallic oxides supported in CeO{sub 2} and CeO{sub 2}-La{sub 2} O{sub 3} for low temperature shift reaction; Oxidos metalicos suportados em CeO{sub 2} e CeO{sub 2}-La{sub 2} O{sub 3} para reacao shift a baixa temperatura

Energy Technology Data Exchange (ETDEWEB)

Maluf, Silvia Salua; Assaf, Elisabete Moreira [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Quimica]. E-mail: sil_maluf@iqsc.usp.br

2008-07-01

This work studied copper and zinc oxides supported in CeO{sub 2} and CeO{sub 2}/La{sub 2}O{sub 3}. The catalytic tests for low temperature shift reaction, carried out for samples, showed the Cu-Ce catalyst presents the highest value of CO conversion (50%) and after the Cu-Ce-La catalysts (30%). The other catalysts showed CO conversion in range of 15%. This behavior is related with surface area, and also with the amount of Cu in the surface of samples (author)

Electron traps and scintillation mechanism in YAlO3:Ce and LuAlO3:Ce scintillators

International Nuclear Information System (INIS)

Wojtowicz, A.J.; Glodo, J.; Drozdowski, W.; Przegietka, K.R.

1998-01-01

In this paper we present the results of thermoluminescence, isothermal decay and scintillation light yield measurements on two isostructural scintillator materials, YAlO 3 :Ce and LuAlO 3 :Ce. In addition to the variety of deep traps identified by thermoluminescence and isothermal decays, scintillation light yield experiments demonstrate the presence in both materials of a number of relatively shallow traps. While the deep traps may reduce the scintillation light yield, they do not influence the kinetics of the process. The shallow traps, on the other hand, by interfering with the process of radiative recombination of charge carriers via Ce 3+ ions, can strongly affect not only the yield of the scintillation process but its kinetics as well. The presence of shallow traps provides a consistent explanation for a number of poorly understood relationships between the two scintillator materials, including a higher room temperature scintillation light yield and longer scintillation decay time in YAlO 3 :Ce, and a longer scintillation rise time in LuAlO 3 :Ce. Theoretical analysis indicates that elimination of these traps would make the two materials nearly identical in scintillator performance. Although the specific identity of all traps remains elusive, the performance of both scintillator materials is now, in practical terms, fully understood. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

Thermodynamic stability studies of Ce-Sb compounds with Fe

Science.gov (United States)

Xie, Yi; Zhang, Jinsuo; Benson, Michael T.; Mariani, Robert D.

2018-02-01

Lanthanide fission products can migrate to the fuel periphery and react with cladding, causing fuel-cladding chemical interaction (FCCI). Adding a fuel additive dopant, such as Sb, can bind lanthanide, such as Ce, into metallic compounds and thus prevent migration. The present study focuses on the thermodynamic stability of Ce-Sb compounds when in contact with the major cladding constituent Fe by conducting diffusion couple tests. Ce-Sb compounds have shown high thermodynamic stability as they did not react with Fe. When Fe-Sb compounds contacted with Ce, Sb was separated out of Fe-Sb compounds and formed the more stable Ce-Sb compounds.

Resistance to {gamma} irradiation of LaBr{sub 3}:Ce and LaCl{sub 3}:Ce single crystals

Energy Technology Data Exchange (ETDEWEB)

Normand, S. [CEA-Recherche Technologique, DETECS/SSTM CE Saclay F-91191 Gif Sur Yvette Cedex (France)]. E-mail: stephane.normand@cea.fr; Iltis, A. [Saint-Gobain Crystals, 104 Route de Larchant, 77140 St Pierre les Nemours (France); Bernard, F. [Saint-Gobain Crystals, 104 Route de Larchant, 77140 St Pierre les Nemours (France); Domenech, T. [CEA-Recherche Technologique, DETECS/SSTM CE Saclay F-91191 Gif Sur Yvette Cedex (France); Delacour, P. [CEA-Recherche Technologique, DETECS/SSTM CE Saclay F-91191 Gif Sur Yvette Cedex (France)

2007-03-11

LaBr{sub 3}:Ce (Brillance 380) and LaCl{sub 3}:Ce (Brillance 350) both exhibit a very good energy resolution and energy linearity response. They are also more sensitive to {gamma}-rays than NaI(Tl) detectors, due to their higher density. The aim of this work is to determine the behaviour of those new single crystals in comparison with NaI(Tl) under severe {gamma}-ray irradiation. Therefore we have irradiated three 25 by 25 mm cylinder crystals encapsulated in air-tight aluminium housing with {sup 60}Co beam. Crystals were tested as stand-alone material not to test the impact of radiation to our photomultiplier tube (PMT). Only encapsulated crystals (alone, without PMTs) were irradiated during several periods to achieve the final 3.4 kGy integrated dose. Intermediate measurements of {sup 137}Cs spectrum were done in order to evaluate the impact of the dose on the studied crystal performances. The radiation hardness of LaBr{sub 3}:Ce and LaCl{sub 3}:Ce was then compared to NaI(Tl). We show in this paper that up to 3.4 kGy no permanent modification of the energy resolution nor colour change is observed for LaBr{sub 3}:Ce and LaCl{sub 3}:Ce crystals. The light output also seems quite stable. This is in stark contrast with the behaviour of NaI:Tl which exhibits continuously decreasing light output, colour change and worsening of energy resolution for doses above 5 Gy.

The Effects of Running Club Membership on Fourth Graders' Achievement of Connecticut State Standard for the Mile Run

Science.gov (United States)

Foshay, John D.; Patterson, Melissa

2010-01-01

The purpose of this study was to investigate the effects of a running club on the mile run times of fourth grade students. The study was conducted in a suburban elementary school setting in central Connecticut with a student body of 400. The participants for the study included 59 fourth grade students, 30 of whom were boys and 29 of whom were…

Ni-CeO2 Cermets Synthesis by Solid State Sintering of Ni/CeO2 Multilayer

Directory of Open Access Journals (Sweden)

Aleksandras ILJINAS

2013-12-01

Full Text Available Nickel and gadolinium doped cerium oxide (GDC cermet is intensively investigated for an application as an anode material for solid oxide fuel cells based on various electrolytes. The purpose of the present investigation is to analyze morphology, microstructure, and optical properties of deposited and annealed for one hour in the temperatures from 500 ºC to 900 ºC Ni/CeO2 multilayer thin films deposited by sputtering. The crystallographic structure of thin films was investigated by X-ray diffraction. The morphology of the film cross-section was investigated with scanning electron microscope. The elemental analysis of samples was investigated by energy-dispersive X-ray spectroscopy. The fitting of the optical reflectance data was made using Abeles matrix method that is used for the design of interference coatings. The film cross-section of the post-annealed samples consisted of four layers. The first CeO2 layer (on Si had the same fine columnar structure with no features of Ni intermixing. The part of Ni (middle-layer after annealing was converted to NiO with grain size exceeding 100 nm. The CeO2 layer deposited on Ni was divided into two layers. Lower layer had small grains not exceeding 25 nm and consisting of NiO and CeO2 mixture. Upper layer consisted of CeO2 columns with approximate thickness of 50 nm. Ni sample annealed at 600 ºC was fully oxidized. The NiO thickness and refraction index were almost steady after annealing in various temperatures. The approximation of experimental reflectance data was successful only for the samples with one transparent homogeneous layer. The reflectance of the Ni/CeO2 samples annealed at intermediate temperatures could not be fitted using one-layer or three-layer model. That may show that a simplified model could not be implemented.  The real system has complicated distribution of refraction index. DOI: http://dx.doi.org/10.5755/j01.ms.19.4.3073

A pressure study of CePt{sub 3}B

Energy Technology Data Exchange (ETDEWEB)

Rauch, Daniela; Suellow, Stefan [Institute of Condensed Matter Physics, University of Technology Braunschweig, Braunschweig (Germany); Hartwig, Steffen [Institute of Condensed Matter Physics, University of Technology Braunschweig, Braunschweig (Germany); BENSC, Helmholtz Zentrum Berlin, Berlin (Germany); Hidaka, Hiroyuki; Yamazaki, Seigo; Amitsuka, Hiroshi [Department of Physics, Hokkaido University, Sapporo (Japan); Bauer, Ernst [Institute of Solid State Physics, Vienna University of Technology, Vienna (Austria)

2013-07-01

CePt{sub 3}B is isostructural to the non-centro symmetric heavy-fermion superconductor CePt{sub 3}Si. In contrast to the latter system, CePt{sub 3}B exhibits a complex magnetically ordered state at low temperatures, with an antiferromagnetic phase below T{sub N}=7.8 K and a weakly ferromagnetic transition below T{sub C}∼5 K. CePt{sub 3}B can be understand as a low pressure variant of CePt{sub 3}Si. Here we report a study of CePt{sub 3}B by means of high pressure magnetization measurements, this way in particular accessing the pressure evolution of the ferromagnetic transition temperature T{sub C}. From our investigation up to about 40 kbar we observe an almost constant transition temperature T{sub C} with pressure. This behavior we discuss in the context of alloying studies on this material.

Correlated electronic structure of CeN

Energy Technology Data Exchange (ETDEWEB)

Panda, S.K., E-mail: swarup.panda@physics.uu.se [Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden); Di Marco, I. [Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden); Delin, A. [Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden); KTH Royal Institute of Technology, School of Information and Communication Technology, Department of Materials and Nano Physics, Electrum 229, SE-164 40 Kista (Sweden); KTH Royal Institute of Technology, Swedish e-Science Research Center (SeRC), SE-100 44 Stockholm (Sweden); Eriksson, O., E-mail: olle.eriksson@physics.uu.se [Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden)

2016-04-15

Highlights: • The electronic structure of CeN is studied within the GGA+DMFT approach using SPTF and Hubbard I approximation. • 4f spectral functions from SPTF and Hubbard I are coupled to explain the various spectroscopic manifestations of CeN. • The calculated XPS and BIS spectra show good agreement with the corresponding experimental spectra. • The contribution of the various l-states and the importance of cross-sections for the photoemission process are analyzed. - Abstract: We have studied in detail the electronic structure of CeN including spin orbit coupling (SOC) and electron–electron interaction, within the dynamical mean-field theory combined with density-functional theory in generalized gradient approximation (GGA+DMFT). The effective impurity problem has been solved through the spin-polarized T-matrix fluctuation-exchange (SPTF) solver and the Hubbard I approximation (HIA). The calculated l-projected atomic partial densities of states and the converged potential were used to obtain the X-ray-photoemission-spectra (XPS) and Bremstrahlung Isochromat spectra (BIS). Following the spirit of Gunnarsson–Schonhammer model, we have coupled the SPTF and HIA 4f spectral functions to explain the various spectroscopic manifestations of CeN. Our computed spectra in such a coupled scheme explain the experimental data remarkably well, establishing the validity of our theoretical model in analyzing the electronic structure of CeN. The contribution of the various l-states in the total spectra and the importance of cross sections are also analyzed in detail.

Luminescence and Tb3+-Ce3+-Eu3+ ion energy transfer in single-crystalline films of Tb3Al5O12:Ce,Eu garnet

International Nuclear Information System (INIS)

Zorenko, Y.; Gorbenko, V.; Voznyak, T.; Batentschuk, M.; Osvet, A.; Winnacker, A.

2008-01-01

The paper is devoted to investigation of the processes of excitation energy transfer between the host cations (Tb 3+ ions) and the activators (Ce 3+ and Eu 3+ ions) in single-crystalline films of Tb 3 Al 5 O 12 :Ce,Eu (TbAG:Ce,Eu) garnet which is considered as a promising luminescent material for the conversion of LED's radiation. The cascade process of excitation energy transfer is shown to be realized in TbAG:Ce,Eu: (i) from Tb 3+ ions to Ce 3+ and Eu 3+ ions; (ii) from Ce 3+ ions to Eu 3+ ions by means of dipole-dipole interaction and through Tb 3+ ion sublattice

Scintillation response of BaF2 and YAlO3:Ce (YAP:Ce) to energetic ions

International Nuclear Information System (INIS)

Slunga, E.; Cederwall, B.; Ideguchi, E.; Kerek, A.; Klamra, W.; Marel, J. van der; Novak, D.; Norlin, L.-O.

2001-01-01

The scintillation response of BaF 2 and YAP:Ce to protons, α particles, 16 O and 28 Si ions in the 5-30 MeV range has been investigated. The ratio between the fast and slow parts of the scintillator signal for BaF 2 has been used to separate protons, α particles and heavier ions, and the dependence of this ratio on the particle energy has been studied. The time constants and intensities of the two components of the YAP:Ce signal were measured, as were the time constant and intensity of the weak component of the slow part of the BaF 2 signal. Furthermore, the dependence of the light yield on the particle energy has been investigated for both BaF 2 and YAP:Ce

Determination of the differences in oxidation potentials for the Pr3+/Pr2+ and Ce3+/Ce2+ pairs in halide melts

International Nuclear Information System (INIS)

Mikheev, N.B.; Auerman, L.N.; Rumer, I.A.; D'yachkova, R.A.

1983-01-01

Cocrystallization has been used with the (PrOCl)/sub s. ph/ - (PrCl 2 , PrCl 3 , SrCl 2 ) melt system to examine the dependence of the cerium(III) cocrystallization coefficient on the X/sub Pr 2+ /X/sub Pr 3+ / ratio in the melt. Measurement has been made in this way of the difference in oxidation potentials for the pairs Pr 3+ /Pr 2+ and Ce 3+ /Ce 2+ : ΔE/sub Pr 3+ /Pr 2+0 -E/sub Ce 3+ /Ce 2+ / 0 , which is 0.08 +/- 0.04 V for chloride

Optical spectroscopy and luminescence quenching of LuI3:Ce3+

International Nuclear Information System (INIS)

Birowosuto, M.D.; Dorenbos, P.; Haas, J.T.M. de; Eijk, C.W.E. van; Kraemer, K.W.; Guedel, H.U.

2006-01-01

Optical spectroscopy of LuI 3 doped with Ce 3+ using ultraviolet and visible light excitation is reported. LuI 3 host excitation and emission and 4f-5d excitation and emission of Ce 3+ are observed. An empirical model based on crystal field splitting was used to estimate the energy of the highest 4f-5d excitation band. The crystal field splitting and centroid shift were compared to those of LuCl 3 :Ce 3+ and LuBr 3 :Ce 3+ . Temperature dependence of X-ray excited luminescence spectra shows thermal quenching, whereas that of the decay curve of Ce 3+ emission excited at the lowest 5d band of Ce 3+ does not indicate the presence of quenching of Ce 3+ emission for temperature below 625K. The quenching in LuI 3 :Ce 3+ therefore occurs before the 5d Ce 3+ emission takes place

Luminescence and scintillation properties of LuPO4-Ce nanoparticles

International Nuclear Information System (INIS)

Vistovskyy, V.; Malyy, T.; Pushak, A.; Vas’kiv, A.; Shapoval, A.; Mitina, N.; Gektin, A.; Zaichenko, A.; Voloshinovskii, A.

2014-01-01

Study of the spectral-luminescence parameters of LuPO 4 -Ce nanoparticles upon the excitation by X-ray quanta and synchrotron radiation with photon energies of 4–25 eV was performed. Nanoparticles with mean size about a=35 nm and nanoparticles with size less than 12 nm reveal the different structures of cerium centers. Luminescence efficiency of LuPO 4 -Ce nanoparticles of a 4 -Ce nanoparticles studied using synchrotron and X-ray excitation. • Different structure of Ce 3+ -centers has been revealed for LuPO 4 -Ce nanoparticles. • Luminescence of LuPO 4 -Ce with size less than 12 nm is strongly quenched upon the X-ray excitation

The highest spin discrete levels in 131,132Ce

International Nuclear Information System (INIS)

Paul, E S; Choy, P T W; Andreoiu, C; Boston, A J; Evans, A O; Fox, C; Gros, S; Nolan, P J; Rainovski, G; Sampson, J A; Scraggs, H C; Walker, A; Appelbe, D E; Joss, D T; Simpson, J; Gizon, J; Astier, A; Buforn, N; Prevost, A; Redon, N; Stezowski, O; Nyako, B M; Sohler, D; Timar, J; Zolnai, L; Bazzacco, D; Lunardi, S; Petrache, C M; Bednarczyk, P; Curien, D; Kintz, N; Ragnarsson, I

2006-01-01

The three superdeformed (SD) bands in 132 Ce and the two SD bands in 131 Ce have been extended to higher spin following experiments with the EUROBALL IV spectrometer. The two SD bands in 131 Ce have been linked together. However, despite the relatively high population intensity of the bands (up to 5% of the respective channel), it has not been possible to unambiguously link any of the five SD bands into the low-spin, normally deformed structures of 131,132 Ce

Using Ce to modify inclusion in spring steel

Directory of Open Access Journals (Sweden)

Wang Q.

2017-01-01

Full Text Available The effect of rare earth metals addition on the Al2O3 inclusions in spring steel used in fastener of high speed railway was investigated by metallographic examination, SEM-EDS and composition analysis. To deform those harmful inclusions to improve material performance，the evolution process of Al2O3 inclusions was investigated through the surface and line scanning. Ce metal modifying Al2O3 is a stepwise reduction process based on a formation of ring shape Ce-riched band around the Al2O3 inclusions during reaction process. Through experiment and thermodynamic calculation, an evolvement rule about Al2O3 inclusions change after Ce addition is obtained, i.e. Al2O3→Ce2O3-Al2O3→Ce2O2S. Changing the inclusions from Al2O3 to rare earth inclusions could improve the resistance to pitting corrosion based on potentiodynamic anodic polarization test.

Room temperature ferromagnetism in Fe-doped CeO2 nanoparticles.

Science.gov (United States)

Maensiri, Santi; Phokha, Sumalin; Laokul, Paveena; Seraphin, Supapan

2009-11-01

RT ferromagnetism was observed in nanoparticles of Fe-doped CeO2 (i.e., Ce(0.97)Fe(0.03)O2) synthesized by a sol-gel method. The undoped and Fe-doped CeO2 were characterized by XRD, Raman spectroscopy, TEM, and VSM. The undoped samples and Ce(0.97)Fe(0.03)O2 precursor exhibit a diamagnetic behavior. The 673 K-calcined Ce(0.97)Fe(0.03)O2 sample is paramagnetic whereas 773 and 873 K-calcined Ce(0.97)Fe(0.03)O2 samples are ferromagnetism having the magnetizations of 4.65 x 10(-3) emu/g and 6.20 x 10(-3) emu/g at 10 kOe, respectively. Our results indicate that the ferromagnetic property is intrinsic to the Fe-doped CeO2 system and is not a result of any secondary magnetic phase or cluster formation.

Synthesis and luminescence of CePO4 and CePO4:Tb hollow and core-shell microspheres composed of single-crystal nanorods

International Nuclear Information System (INIS)

Guan Mingyun; Sun Jianhua; Han Min; Xu Zheng; Tao Feifei; Yin Gui; Wei Xianwen; Zhu Jianmin; Jiang Xiqun

2007-01-01

Lanthanide phosphate microspheres composed of single-crystal CePO 4 and CePO 4 :Tb nanorods were successfully synthesized, respectively, using the functionalized composite aggregate as a template, which is composed of P123, H 6 P 4 O 13 and Ce 3+ , and also as a resource of reaction species with high chemical potential. The shape and the phase structure of the CePO 4 nanocrystal can be easily controlled via adjusting reaction temperature, monomer concentration and annealing temperature. SEM images show the spherical superstructure composed of nanorods. HRTEM and SAED images reveal the single-crystalline nature of nanorod and TEM images show the hollow interiors of the superstructure. XRD patterns indicate that the crystal structure of the nanorods is hexagonal before and monoclinic after annealing. The formation mechanism was proposed. Strong UV and green luminescence were observed for the CePO 4 and CePO 4 :Tb microspheres, respectively. The synthesis method can be extended to the fabrication of NRHS and core-shell microspheres of other rare-earth or doped LnPO 4 materials for wide applications

Electrochemical characterization of Pt-CeO{sub 2}/C and Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalysts for ethanol electro-oxidation

Energy Technology Data Exchange (ETDEWEB)

Bai, Yuxia; Qiu, Xinping; Xi, Jingyu; Wang, Jianshe; Li, Jinfeng; Zhu, Wentao; Chen, Liquan [Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China); Wu, Jianjun [Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China); Department of Chemistry, Shijiazhuang College, Shijiazhuang 050801 (China)

2007-04-24

Pt-CeO{sub 2}/C and a series of Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalyst powders with different Ce/Zr ratio were prepared and evaluated in terms of the electrochemical activity for ethanol electro-oxidation using cyclic voltammetry (CV), steady state polarization experiments and CO-stripping technique at room temperature. XRD results show that Ce{sub x}Zr{sub 1-x}O{sub 2} and Pt coexist in the Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalyst and Ce{sub x}Zr{sub 1-x}O{sub 2} has no effect on the crystalline lattice of Pt. TEM results show that the Pt and Ce{sub x}Zr{sub 1-x}O{sub 2} particles dispersed uniformly over the surface of the carbon black. Cyclic voltammetry results show that the mass activity and specific activity of Pt-CeO{sub 2}/C for ethanol electro-oxidation is higher than that of Pt/C. The structure and Ce/Zr ratio of Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C has effect on the catalytic activity of catalysts. CO-stripping voltammetry showed that the inclusion of CeO{sub 2} and Ce{sub x}Zr{sub 1-x}O{sub 2} favors the CO oxidation at lower potential. (author)

Tetragonal Ce-based Ce-Sm(Fe, Co, Ti){sub 12} alloys for permanent magnets

Energy Technology Data Exchange (ETDEWEB)

Martin-Cid, Andres; Salazar, Daniel [BCMaterials, Bizkaia Science and Tecnology Park, 48160 Derio (Spain); Gabay, Aleksandr M.; Hadjipanayis, George C. [Department of Physics and Astronomy, University of Delaware, Newark, DE, 19716 (United States); Barandiaran, Jose Manuel [BCMaterials, Bizkaia Science and Tecnology Park, 48160 Derio (Spain); Department of Electricity and Electronics, University Basque Country (UPV/EHU), 48080 Bilbao (Spain)

2016-12-15

Abundance and relatively low cost of Ce provide a great incentive for its use in rare-earth permanent magnets. It has been recently reported that the tetragonal Ce(Fe,Co,Ti)12 compounds may exhibit application-worthy intrinsic magnetic properties. In this work the effect of the α-Fe phase formation due to the evaporation of Sm during alloy fabrication has been studied, as a previous step in the attempt to convert the intrinsic magnetic properties into functional properties of a permanent magnet. Ce{sub 0.5}Sm{sub 0.5}Fe{sub 9}Co{sub 2}Ti alloys based on the ThMn12-type crystal structure have been synthesized via melt-spinning with different Sm content. Coercive fields between 2.8 and 1.4 kOe have been found for α-Fe phase contents between 8 and 46% in volume, showing the influence of the α-Fe phase on the coercivity and exchange coupling between the hard and soft phase. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Satellite line mapping in Eu3+–Ce3+ and Pr3+–Ce3+ codoped Y2SiO5

International Nuclear Information System (INIS)

Serrano, D.; Karlsson, J.; Zheng, L.; Dong, Y.; Ferrier, A.; Goldner, P.; Walther, A.; Rippe, L.; Kröll, S.

2016-01-01

In this work we perform a high-resolution spectroscopic investigation of Eu 3+ –Ce 3+ and Pr 3+ –Ce 3+ codoped Y 2 SiO 5 crystals. Satellite line spectra were recorded at low temperatures around the Eu 3+ : 7 F 0 → 5 D 0 and the Pr 3+ : 3 H 4 → 1 D 2 transitions. It is observed that the incorporation of Ce 3+ as a codopant notably changes the Eu 3+ and Pr 3+ satellite line patterns. Satellite lines measured in singly doped Eu 3+ :Y 2 SiO 5 were found at the same spectral positions in Eu 3+ –Ce 3+ codoped crystals. These coincident lines were concluded to be due to pairs of Eu 3+ ions. Extra satellite lines appeared in the codoped crystals, which were assigned to Ce 3+ related structures such as Ce 3+ –Eu 3+ pairs. The analysis of the Pr 3+ satellite line spectra presents further challenges. Satellite lines associated to Pr 3+ pairs show weaker intensity, presumably due to the efficient quenching of the Pr 3+1 D 2 emission through cross-relaxation paths ( 1 D 2 → 1 G 4 ; 3 H 4 → 3 F 4 ). The investigation of the Eu 3+ and Pr 3+ satellite line patterns in Y 2 SiO 5 is particularly interesting for their exploitation in rare-earth based quantum computation schemes. - Highlights: • We recorded Eu and Pr satellite lines in Y 2 SiO 5 with and without Ce as a codopant. • The presence of Ce leads to the appearance of extra satellite lines in the spectra. • The satellite lines are associated to minor crystal sites such as ion pairs. • Less than 100 ion pairs were detected per satellite line. • The exploitation of the satellite line structure is proposed for quantum computing.

Method for removing trace contaminants from multicurie amounts of 144Ce

International Nuclear Information System (INIS)

Wagner, J.A.; Kanapilly, G.M.

1976-01-01

Removal of contaminants from stock solutions of 144 Ce(III) was required for large quantities of 144 Ce prior to incorporation into fused aluminosilicate particles for inhalation toxicology studies. Since available procedures for purification of 144 Ce could not be readily adapted to our laboratory conditions and requirements, a simple procedure was developed to purify 144 Ce in multicurie quantities of 144 Ce(III). This procedure consists of separation of 144 Ce from contaminants by precipitation and filtrations at different pH. Its simplicity and efficacy in providing a stock solution that would readily exchange into montmorillonite clay was demonstrated when it was used during the preparation of large amounts of 144 Ce in fused aluminosilicate particles

Sonocatalytic degradation of diclofenac with FeCeOx particles in water.

Science.gov (United States)

Chong, Shan; Zhang, Guangming; Wei, Zhongheng; Zhang, Nan; Huang, Ting; Liu, Yucan

2017-01-01

This paper studies the sonocatalytic degradation of diclofenac in water using FeCeO x -catalyzed ultrasound. The effects of pre-adsorption and gas addition were investigated. Nitrogen adsorption/desorption, SEM, XRD, Raman and XPS analyses of FeCeO x before and after sonication were characterized. The proposed mechanism was based on the microstructure changes of FeCeO x and reactive-species-scavenging performances. The results show that FeCeO x has excellent performance in catalyzing an ultrasonic system in water, and 80% of diclofenac was removed in 30min ([Diclofenac]=20mg/L, FeCeO x amount=0.5g/L, pH=6, ultrasonic density=3.0W/cm 3 , ultrasonic frequency=20kHz, temperature=298K). The Fe, Ce, and O elements remained highly dispersed in the structure of FeCeO x , and the solid solution structure of FeCeO x remained stable after the reaction. Ce (III) was gradually oxidized to Ce (IV) and Fe (III) was gradually reduced to Fe (II) after the reaction, which indicates that Fe and Ce ions with different valences coexisted in dynamic equilibrium. The amount of oxygen vacancies in FeCeO x significantly decreased after the reaction, which indicates that oxygen vacancy participated in the ultrasonic process. Singlet oxygen 1 O 2 was the primary reactive species in the degradation process, and the hydroxyl radicals OH and superoxide radical anion O 2 - also participated in the reaction. FeCeO x had excellent chemical stability with negligible leaching ions in the ultrasonic process. Copyright © 2016 Elsevier B.V. All rights reserved.

Combining Mineral Identification Techniques to Help Homeowners of Northeastern Connecticut Diagnose Pyrrhotite Laced Concrete Foundations

Science.gov (United States)

Gourley, J. R.; Geiss, C. E.

2017-12-01

Crumbling concrete linked to the mineral pyrrhotite is an emerging home owner crisis in northeastern Connecticut as new home foundations are failing within only several years. Potentially thousands of homes that have been built between the mid 1980's and 2016 are affected. Homes have been rendered worthless as basement concrete is crumbling and the cost of repair often exceeds the value of the home. In all of the failing concrete cases the presence of pyrrhotite from a local quarry is the common denominator. Testing for pyrrhotite, until now, has been costly and often invasive, with large core samples required. In working with a local advocacy group, The Connecticut Coalition Against Crumbling Basements (CCACB), we have developed a rapid analysis method that uses a combination of magnetic susceptibility and high resolution X-ray diffraction to identify both the mineral pyrrhotite and/or its expansive product mineral, ettringite. The goal of this method to give homeowners a reliable diagnosis that could help in mitigation decisions and/or the determination of the resale value of their homes. The partnership of Trinity College's Environmental Science Program with the CCACB has built a rewarding bridge between education and the community. Faculty, students and local advocates are collaborating to solve a problem that will help homeowners diagnose a potentially devastating non-natural "geo" hazard that can adversely affect home values where concrete is of an unknown provenance.

Core-level XPS studies of Ce and La intermetallic compounds and their implications for the 4f levels of Ce compounds

International Nuclear Information System (INIS)

Freiburg, C.; Fuggle, J.C.; Hillebrecht, F.U.; Zolnierek, Z.; Laesser, R.

1983-01-01

The 3d core hole X-ray photoelectron spectra (XPS) of approximately 30 intermetallic compounds of La and Ce are reported. Transitions to final states with approximately f 0 , f 1 and f 2 character are observed in some Ce compounds (f 0 and f 1 for La compounds). The results are discussed in terms of the current ideas of the influence of f-counts and f-levels hybridization on core level lineshapes. We cannot find an explanatoin of the observed spectra consisted with the ''promotial model'' where the 4f-count varies and 4f electron was thought to be entirely promoted to the Ce 5d6s valence bands in some compounds. There may be some small charge transfer from the f level, however. In conjunction with ideas on screening processes in XPS the observed lineshapes suggest coupling of the 4f electrons to other states is strongest in those compounds previously thought to have f 0 character. This coupling increases despite a large increase in the Ce-Ce distance when Ce is diluted with Ni or Pd. Thus it cannot be due to direct f-f interaction and must be attributed to coupling with the other valence electrons; possibly those centred on the partner sites. (orig./EZ) [de

The role of calcification for staging cystic echinococcosis (CE)

Energy Technology Data Exchange (ETDEWEB)

Hosch, Waldemar; Kauffmann, Guenter W. [University Hospital Heidelberg, Department of Radiology, Heidelberg (Germany); Stojkovic, Marija; Junghanss, Thomas [University Hospital of Heidelberg, Section of Clinical Tropical Medicine, Heidelberg (Germany); Jaenisch, Thomas [University Hospital of Heidelberg, Section of Clinical Tropical Medicine, Heidelberg (Germany); University Hospital of Heidelberg, Section of Biostatistics and Epidemiology, Heidelberg (Germany)

2007-10-15

The prevalence of calcified cysts and the significance of calcification as a sign of cyst inactivity in cystic echinococcosis (CE) was evaluated. Seventy-eight patients (36 females, 42 males, mean age 40.8 {+-} 16.9 years) with CE, having a total of 137 abdominal cysts (116 hepatic, three splenic, one renal and 17 peritoneal cysts), were diagnosed and followed-up by ultrasound during and after albendazole treatment or as part of the watch-and-wait approach recording changes in the cyst wall and content. In 48 patients with 94 cysts, computed tomography (CT) imaging was additionally available and was correlated with ultrasound findings. Cyst wall calcification was classified into (1) ''sprinkled'', (2) ''eggshell-like'', and (3) ''circular''. Calcification of the cyst wall and/or cyst content was detected in 67 echinococcal cysts (48.9% of all cysts) in 39 patients (15 females, 24 males, mean age 40.8 {+-} 14.8 years). Of the total of 67 calcified cysts, only 23 were compatible with WHO type CE5, 18 with WHO type CE4. Judged by cyst content, the remaining 26 were of WHO type CE1, CE2 and CE3 (n = 1, n = 8, and n = 17, respectively). During a mean period of 34.3 months ({+-}21.3 months) the majority of cysts (n = 32) did not exhibit any change in cyst content and wall properties. Fourteen cysts showed signs of progressive involution, five cysts (all of WHO type CE3) of renewed activity defined by recurring fluid collection. In 16 cysts, no follow-up was available due to surgery or drop out. Calcification of the cyst is not restricted to the inactive WHO cyst types CE4 and CE5, but occurs in all stages and in up to 50% of cysts. The completeness and, most importantly, the stability of consolidation of cyst content over time predicts cyst inactivity more reliably. (orig.)

CE-MS fingerprinting of Laurencia complex algae (Rhodophyta).

Science.gov (United States)

Machín-Sánchez, María; Asensio-Ramos, María; Hernández-Borges, Javier; Gil-Rodríguez, María Candelaria

2014-03-01

The use of CE-ESI-MS has been considered as a new chemical strategy for the possible discernment of genera and species of the Laurencia complex. After the selection of the CE-MS and the extraction conditions, a total of 28 specimens of the complex, including different species of four genera (Laurencia, Laurenciella, Palisada, and Osmundea) collected from five intertidal locations on the Island of Tenerife (Canary Islands, Spain) were analyzed. CE-MS fingerprints revealed that CE-MS can be used as a useful tool for these studies in order to assess similarities and differences between them and that it constitutes an important starting point for further studies in the field. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The equiatomic intermetallics REPtCd (RE = La, Ce, Pr, Nd, Eu) and magnetic properties of CeAuCd

Energy Technology Data Exchange (ETDEWEB)

Johnscher, Michael; Niehaus, Oliver; Poettgen, Rainer [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Tappe, Frank [Hochschule Hamm-Lippstadt, Hamm (Germany)

2015-06-01

The cadmium intermetallics REPtCd (RE = La, Ce, Pr, Nd, Eu) and CeAuCd were synthesized by induction-melting of the elements in sealed niobium ampoules followed by annealing in muffle furnaces. The samples were characterized by powder X-ray diffraction. The structures of CePtCd (ZrNiAl type, P anti 62m, a = 763.8(6), c = 409.1(4) pm, wR2 = 0.0195, 298 F{sup 2} values, 14 variables) and EuPtCd (TiNiSi type, Pnma, a = 741.3(2), b = 436.4(1), c = 858.0(4) pm, wR2 = 0.0385, 440 F{sup 2} values, 20 variables) were refined from single-crystal data. The REPtCd structures exhibit three-dimensional networks of corner- and edge-sharing Cd rate at Pt{sub 2/6}Pt{sub 2/3} and Cd rate at Pt{sub 4/4} tetrahedra, which leave cages for the rare earth atoms. Temperature-dependent magnetic susceptibility data of CeAuCd reveal a paramagnetic to antiferromagnetic phase transition at T{sub N} = 3.7(5) K.

The equiatomic intermetallics REPtCd (RE = La, Ce, Pr, Nd, Eu) and magnetic properties of CeAuCd

International Nuclear Information System (INIS)

Johnscher, Michael; Niehaus, Oliver; Poettgen, Rainer

2015-01-01

The cadmium intermetallics REPtCd (RE = La, Ce, Pr, Nd, Eu) and CeAuCd were synthesized by induction-melting of the elements in sealed niobium ampoules followed by annealing in muffle furnaces. The samples were characterized by powder X-ray diffraction. The structures of CePtCd (ZrNiAl type, P anti 62m, a = 763.8(6), c = 409.1(4) pm, wR2 = 0.0195, 298 F 2 values, 14 variables) and EuPtCd (TiNiSi type, Pnma, a = 741.3(2), b = 436.4(1), c = 858.0(4) pm, wR2 = 0.0385, 440 F 2 values, 20 variables) were refined from single-crystal data. The REPtCd structures exhibit three-dimensional networks of corner- and edge-sharing Cd rate at Pt 2/6 Pt 2/3 and Cd rate at Pt 4/4 tetrahedra, which leave cages for the rare earth atoms. Temperature-dependent magnetic susceptibility data of CeAuCd reveal a paramagnetic to antiferromagnetic phase transition at T N = 3.7(5) K.

Prevalence of agglutinating antibodies to Sarcocystis neurona in skunks (Mephitis Mephitis), raccoons (Procyon lotor), and opossums (Didelphis Virginiana) from Connecticut.

Science.gov (United States)

Mitchell, Sheila M; Richardson, Dennis J; Cheadle, M Andy; Zajac, Anne M; Lindsay, David S

2002-10-01

Equine protozoal myeloencephalitis is the most important protozoan disease of horses in North America and is usually caused by Sarcocystis neurona. Natural cases of encephalitis caused by S. neurona have been reported in skunks (Mephitis mephitis) and raccoons (Procyon lotor). Opossums (Didelphis spp.) are the only known definitive host. Sera from 24 striped skunks, 12 raccoons, and 7 opossums (D. virginiana) from Connecticut were examined for agglutinating antibodies to S. neurona using the S. neurona agglutination test (SAT) employing formalin-fixed merozoites as antigen. The SAT was validated for skunk sera using pre- and postinfection serum samples from 2 experimentally infected skunks. Of the 24 (46%) skunks 11 were positive, and all 12 raccoons were positive for S. neurona antibodies. None of the 7 opossums was positive for antibodies to S. neurona. These results suggest that exposure to sporocysts of S. neurona by intermediate hosts is high in Connecticut. The absence of antibodies in opossums collected from the same areas is most likely because of the absence of systemic infection in the definitive host.

Sr2CeO4: Electronic and structural properties

International Nuclear Information System (INIS)

Rocha, Leonardo A.; Schiavon, Marco A.; Nascimento, Clebio S.; Guimarães, Luciana; Góes, Márcio S.; Pires, Ana M.; Paiva-Santos, Carlos O.

2014-01-01

Highlights: • Sr 2 CeO 4 it was obtained from the heat treatment of Ce 3+ -doped strontium oxalate. • Rietveld analysis made it possible to obtain information about crystalline structure. • Experimental band gap value was compared with theoretical obtained by Sparkle/PM7. • The materials obtained shows intense photoluminescence and scintillator properties. - Abstract: This work presents on the preparation and photoluminescent properties of Sr 2 CeO 4 obtained from the heat treatment of Ce(III)-doped strontium oxalate (10, 25 and 33 mol%). The oxalate precursors were heat treated at 1100 °C for 12 h. The structure of this photoluminescent material was evaluated by the Rietveld method. The route used in this work to prepare the materials showed to be viable when compared to other synthesis reported in the literature. The Sr 2 CeO 4 material showed a broad and intense band emission with a maximum around 485 nm. The quantitative phase analysis showed that the Sr 2 CeO 4 photoluminescent phase is the majority one compared to the impurity phases of SrCeO 3 and SrCO 3 . From all results it was possible to verify a complete elimination of the CeO 2 phase for the sample obtained from the heat treatment of oxalate precursor containing 33 mol% of cerium(III). The material showed excellent properties for possible candidate as scintillator materials, and in the improvement of efficiency of solar cells when excited in the UV–vis region. The CIE chromaticity diagram it is also reported in this work

Preparation and characterization of Ce-doped HfO2 nanoparticles

International Nuclear Information System (INIS)

Gálvez-Barboza, S.; González, L.A.; Puente-Urbina, B.A.; Saucedo-Salazar, E.M.; García-Cerda, L.A.

2015-01-01

Highlights: • Ce-doped HfO 2 nanoparticles were prepared by a modified solgel method. • Ce-doped HfO 2 nanoparticles have a semispherical shape with sizes between 6 and 11.5 nm. • The samples doped with 10% in weight of Ce directly crystallized in a cubic structure. • A quick, straightforward and effective route for the preparation of Ce-doped nanoparticles. - Abstract: A modified solgel method to synthesize Ce-doped HfO 2 nanoparticles was carried out using a precursor material prepared with cerium nitrate, hafnium chloride, citric acid and ethylene glycol. The obtained precursor material was calcined at 500 and 700 °C for 2 h in air. The influence of the concentration of Ce and the calcination temperature was studied to observe the structural and morphological changes of the obtained materials. For the characterization, X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman scattering (RS) were employed. The XRD patterns shown that the Ce-doped HfO 2 undergoes a structural transformation from monoclinic to cubic phase, which is significantly dependent on the Ce content and calcination temperature. TEM images have also confirmed the existence of semispherical nanoparticles with sizes between 6 and 11.5 nm

Physical, biochemical and genetic characterization of enterocin CE5-1 produced by Enterococcus faecium CE5-1 isolated from Thai indigenous chicken intestinal tract

OpenAIRE

Kraiyot Saelim; Sireewan Kaewsuwan; Akio Tani; Suppasil Maneerat

2015-01-01

Enterocin CE5-1 produced by Enterococcus faecium CE5-1 isolated from the chicken gastrointestinal tract was active in the wide range of pH 2-10 and temperature 30-100°C and sensitive to proteolytic enzymes and -amylase. It remained active after storage at -20°C for 2 months. Moreover, enterocin CE5-1 showed antibacterial activity against lactobacilli, bacilli, listeria, staphylococci and enterococci, especially antibiotic-resistant enterococci. In vitro study of enterocin CE5-1 decr...

The formation of intermetallic compounds during interdiffusion of Mg–Al/Mg–Ce diffusion couples

International Nuclear Information System (INIS)

Dai, Jiahong; Jiang, Bin; Li, Xin; Yang, Qingshan; Dong, Hanwu; Xia, Xiangsheng; Pan, Fusheng

2015-01-01

Graphical abstract: Al–Ce intermetallic compounds (IMCs) formed in Mg–Al/Mg–Ce diffusion couples. During the whole diffusion process, Al was the dominant diffusing species, and it substituted for Mg atoms of the Mg–Ce substrate. Five Al–Ce IMCs of Al 4 Ce, Al 11 Ce 3 , Al 3 Ce, Al 2 Ce, and AlCe were formed via the reaction of Al and Ce. - Highlights: • Al–Ce IMCs formation in the Mg–Al/Mg–Ce diffusion couples was studied. • Formation of Al 4 Ce as the first phase was rationalized using the Gibbs free energy. • The activation energy for the growth of the diffusion reaction zones was 36.6 kJ/mol. - Abstract: The formation of Al–Ce intermetallic compounds (IMCs) during interdiffusion of Mg–Al/Mg–Ce diffusion couples prepared by solid–liquid contact method was investigated at 623 K, 648 K and 673 K for 24 h, 48 h and 72 h, respectively. During the whole diffusion process, Al was the dominant diffusing species, and it substituted for Mg of the Mg–Ce substrate. Five Al–Ce IMCs of Al 4 Ce, Al 11 Ce 3 , Al 3 Ce, Al 2 Ce and AlCe were formed via the reaction of Al and Ce. The formation of Al 4 Ce as the first kind of IMC was rationalized on the basis of an effective Gibbs free energy model. The activation energy for the growth of the total diffusion reaction layer was 36.6 kJ/mol

Experimental investigation and thermodynamic calculation of the Zn–Fe–Ce system

Energy Technology Data Exchange (ETDEWEB)

Lu, Longfei; Wu, Changjun [Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Jiangsu 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Jiangsu 213164 (China); Wang, Jianhua, E-mail: wangjh@cczu.edu.cn [Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Jiangsu 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Jiangsu 213164 (China); Liu, Ya; Tu, Hao; Su, Xuping [Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Jiangsu 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Jiangsu 213164 (China)

2015-11-05

The 450 °C and 600 °C isothermal sections of the Zn–Fe–Ce system were investigated using equilibrated alloys and diffusion couples. The samples were analyzed by Scanning Electron Microscopy equipped with Energy Dispersive X-ray Spectrometer analysis and X-ray power diffraction. 15 and 13 three-phase regions were identified to exist at 450 °C and 600 °C, respectively. No ternary compound was found. Ce can not dissolve into all the Zn–Fe binary compounds and the solubilities of Fe in all the Zn–Ce binary phases were limited. All the Zn–Fe compounds can equilibrate with CeZn{sub 11} and all the Ce–Zn compounds (except CeZn) can equilibrate with α-Fe. Furthermore, thermodynamic extrapolation of the Zn–Fe–Ce system was carried out and showed good agreement well with detected phase relationships. - Highlights: • 450 °C and 600 °C sections of the Zn–Fe–Ce system were constructed. • No ternary compound exists. • Ce can not dissolve into all the Zn–Fe compounds. • All the Fe–Zn compounds can equilibrate with CeZn{sub 11}. • Thermodynamic extrapolation results agree with experimental data.

Mechanochemical and combustion synthesis of CeB{sub 6}

Energy Technology Data Exchange (ETDEWEB)

Akguen, Baris [Roketsan Missiles Inc., Ankara (Turkey); Sevinc, Naci; Topkaya, Yavuz [Middle East Technical Univ., Ankara (Turkey). Dept. of Metallurgical and Materials Engineerung; Camurlu, H. Erdem [Akdeniz Univ., Antalya (Turkey). Dept. of Mechanical Engineering

2013-04-15

CeB{sub 6} powder was prepared via combustion synthesis (CS) and mechanochemical processing (MCP) methods starting from CeO{sub 2}, B{sub 2}O{sub 3} and Mg powder mixtures. In CS, reactant mixtures were ignited in a preheated pot furnace under argon atmosphere. Products contained CeB{sub 6}, MgO and Mg{sub 3}B{sub 2}O{sub 6}, as revealed by X-ray diffraction analysis. After leaching in 1 M HCl for 15h, MgO was removed but Mg{sub 3}B{sub 2}O{sub 6} could not be removed from the products. Ball milling of products in ethanol prior to leaching made the removal of Mg{sub 3}B{sub 2}O{sub 6} possible by leaching. Yield of CeB{sub 6} was 68.6% in CS. MCP was performed in a stainless steel vial with a planetary ball mill at 300 rpm for 30h. MCP products contained CeB{sub 6}, MgO and small amount of Fe. Leaching in 1 M HCl for 30min was sufficient to remove MgO. Yield of CeB{sub 6} was 84.4% in MCP. According to scanning electron microscopy examinations, particles of CeB6 prepared by CS and MCP had submicrometer size. Average particle sizes were determined as 290nm and 240nm, respectively.

Public health assessment for public health implications of radiation contamination at former clock factories located in Bristo (Hartford County), New Haven, (New Haven County), Thomaston (Litchfield County), and Waterbury (New Haven County), Connecticut, Region 1. Final report

International Nuclear Information System (INIS)

1999-01-01

This public health assessment was developed (1) to evaluate the radiation data collected by the Connecticut Department of Environmental Protection (CT DEP) at structures that once housed clock factories in four Connecticut municipalities, and (2) to determine whether a public health hazard exists at any of these sites from the contamination. Contamination was detected at levels that may pose a health risk to current occupants at the former Waterbury Clock Factory, the former Lux Clock Factory, and the former Benrus Clock Company buildings in Waterbury; the former Sessions Clock Company in Bristol; and the former Seth Thomas Clock Company in Thomaston. However, none of the radiation levels detected pose an immediate health problem. The Connecticut Department of Public Health recommends that individuals be disassociated from areas with radiation at levels exceeding 15 mRem/year

Adsorption process of fluoride from drinking water with magnetic core-shell Ce-Ti@Fe3O4 and Ce-Ti oxide nanoparticles.

Science.gov (United States)

Abo Markeb, Ahmad; Alonso, Amanda; Sánchez, Antoni; Font, Xavier

2017-11-15

Synthesized magnetic core-shell Ce-Ti@Fe 3 O 4 nanoparticles were tested, as an adsorbent, for fluoride removal and the adsorption studies were optimized. Adsorption capacity was compared with the synthesized Ce-Ti oxide nanoparticles. The adsorption equilibrium for the Ce-Ti@Fe 3 O 4 adsorbent was found to occur in cycles of adsorption-desorption. Although the nanoparticles suffer slight structure modifications after their reusability, they keep their adsorption capacity. Likewise, the efficiency of the Ce-Ti@Fe 3 O 4 was demonstrated when applied to real water to obtain a residual concentration of F - below the maximum contaminated level, 1.5mg/L (WHO, 2006). Copyright © 2017 Elsevier B.V. All rights reserved.

In Connecticut: improving patient medication management in primary care.

Science.gov (United States)

Smith, Marie; Giuliano, Margherita R; Starkowski, Michael P

2011-04-01

Medications are a cornerstone of the management of most chronic conditions. However, medication discrepancies and medication-related problems-some of which can cause serious harm-are common. Pharmacists have the expertise to identify, resolve, monitor, and prevent these problems. We present findings from a Centers for Medicare and Medicaid Services demonstration project in Connecticut, in which nine pharmacists worked closely with eighty-eight Medicaid patients from July 2009 through May 2010. The pharmacists identified 917 drug therapy problems and resolved nearly 80 [corrected] percent of them after four encounters. The result was an estimated annual saving of $1,123 per patient on medication claims and $472 per patient on medical, hospital, and emergency department expenses-more than enough to pay for the contracted pharmacist services. We recommend that the Center for Medicare and Medicaid Innovation support the evaluation of pharmacist-provided medication management services in primary care medical homes, accountable care organizations, and community health and care transition teams, as well as research to explore how to enhance team-based care.

Photodynamic Processes in Fluoride Crystals Doped with Ce3+

Directory of Open Access Journals (Sweden)

Pavlov V.V.

2015-01-01

Full Text Available Integrated studies of photoelectric phenomena and their associated photodynamic processes in LiCaAlF6, LiLuF4, LiYF4, LiY0,5Lu0,5F4, SrAlF5 crystals doped with Ce3+ ions have been carried out using the combination of the methods of optical and dielectric spectroscopy. The numerical values of the basic parameters of photodynamic processes and their spectral dependence in 240 – 310 nm spectral range are evaluated. It has been shown that the most probable process, which leads to the photoionization of Ce3+ ions in LiYxLu1-xF4:Ce3+ (x=0; 0,5; 1 and LiCaAlF6:Ce3+ crystals, is excited-state absorption to the states of mixed configurations of Ce3+ ions localized near/in the conduction band of crystal.

Characterizations of electrodeposited Ni–CeO{sub 2} nanocomposite coatings

Energy Technology Data Exchange (ETDEWEB)

Kasturibai, S., E-mail: s.kasturibai@yahoo.co.in [Department of Chemistry, Alagappa Government Arts College, Karaikudi 630 003, Tamilnadu (India); Advanced Nanocomposite Coatings Laboratory, Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamilnadu (India); Kalaignan, G. Paruthimal, E-mail: pkalaignan@yahoo.com [Advanced Nanocomposite Coatings Laboratory, Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamilnadu (India)

2014-10-15

The expansion of current machinery requires metallic materials with better surface properties. In the present investigation, CeO{sub 2} reinforced nickel nanocomposite coatings were deposited on mild steel substrate by direct current electrodeposition process employing nickel acetate bath. The effect of incorporation of CeO{sub 2} particles in the Ni nanocomposite coatings on the micro hardness and corrosion behaviour has been evaluated. Smooth and compact nanocomposite deposits containing well-distributed cerium oxide particles were obtained. The crystallite structure was fcc for electrodeposited nickel and Ni–CeO{sub 2} nanocomposite coatings. It has been observed that, the presence of CeO{sub 2} nanoparticles favours the [111] and [200] texture of nickel matrix. The co-deposition of CeO{sub 2} nanoparticles with nickel was found to be favoured at applied current density of 8 A dm{sup −2}. The micro hardness values of the nickel nanocomposite coatings (725 HV) was higher than that of pure nickel (265 HV).The decrease in I{sub corr} values and increase in Constant Phase Element values were investigated in 3.5% NaCl solution which showed the higher corrosion resistant nature of Ni–CeO{sub 2} coatings. - Highlights: • Ni–CeO{sub 2} composite coatings have electrodeposited from eco-friendly acetate bath. • Inclusion of CeO{sub 2} in the composite coating has refined the crystallite size. • Micro hardness values have increased with CeO{sub 2} content in the composite coatings. • The negative shift of E{sub corr} confirming cathodic protective nature of coatings.

Information System through ANIS at CeSAM

Science.gov (United States)

Moreau, C.; Agneray, F.; Gimenez, S.

2015-09-01

ANIS (AstroNomical Information System) is a web generic tool developed at CeSAM to facilitate and standardize the implementation of astronomical data of various kinds through private and/or public dedicated Information Systems. The architecture of ANIS is composed of a database server which contains the project data, a web user interface template which provides high level services (search, extract and display imaging and spectroscopic data using a combination of criteria, an object list, a sql query module or a cone search interfaces), a framework composed of several packages, and a metadata database managed by a web administration entity. The process to implement a new ANIS instance at CeSAM is easy and fast : the scientific project has to submit data or a data secure access, the CeSAM team installs the new instance (web interface template and the metadata database), and the project administrator can configure the instance with the web ANIS-administration entity. Currently, the CeSAM offers through ANIS a web access to VO compliant Information Systems for different projects (HeDaM, HST-COSMOS, CFHTLS-ZPhots, ExoDAT,...).

Scintillation and optical stimulated luminescence of Ce-doped CaF2

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Watanabe, Kenichi; Fukuda, Kentaro; Kawaguchi, Noriaki; Miyamoto, Yuka; Nanto, Hidehito

2014-01-01

Scintillation and optical stimulated luminescence of Ce 0.1–20% doped CaF 2 crystals prepared by Tokuyama Corp. were investigated. In X-ray induced scintillation spectra, luminescence due to Ce 3+ 5d–4f transition appeared around 320 nm with typically 40 ns decay time. By 241 Am 5.5 MeV α-ray irradiation, 0.1% doped one showed the highest scintillation light yield and the light yield monotonically decreased with Ce concentrations. Optically stimulated luminescence after X-ray irradiation was observed around 320 nm under 550 or 830 nm stimulation in all samples. As a result, intensities of optically stimulated luminescence were proportional to Ce concentrations. Consequently, scintillation and optically stimulated luminescence resulted to have a complementary relation in Ce-doped CaF 2 system. - Highlights: • Optical, scintillation, and OSL properties of Ce 0.1–20% doped CaF 2 were studied. • Scintillation light yield exhibited inverse proportionality to Ce concentrations. • OSL intensities showed proportionality to Ce concentrations. • Complementary relation of scintillation and OSL was experimentally confirmed

Raman spectroscopic studies on CeVO4 at high pressures

International Nuclear Information System (INIS)

Rao, Rekha; Garg, Alka B.; Wani, B.N.

2011-01-01

Raman scattering investigations of CeVO 4 at high pressures is reported. Polycrystalline CeVO 4 was prepared by solid state reaction of CeO 2 and V 2 O 5 . High pressure Raman spectroscopic measurements were carried out as per experimental details given

Contributing opportunistic resources to the grid with HTCondor-CE-Bosco

Science.gov (United States)

Weitzel, Derek; Bockelman, Brian

2017-10-01

The HTCondor-CE [1] is the primary Compute Element (CE) software for the Open Science Grid. While it offers many advantages for large sites, for smaller, WLCG Tier-3 sites or opportunistic clusters, it can be a difficult task to install, configure, and maintain the HTCondor-CE. Installing a CE typically involves understanding several pieces of software, installing hundreds of packages on a dedicated node, updating several configuration files, and implementing grid authentication mechanisms. On the other hand, accessing remote clusters from personal computers has been dramatically improved with Bosco: site admins only need to setup SSH public key authentication and appropriate accounts on a login host. In this paper, we take a new approach with the HTCondor-CE-Bosco, a CE which combines the flexibility and reliability of the HTCondor-CE with the easy-to-install Bosco. The administrators of the opportunistic resource are not required to install any software: only SSH access and a user account are required from the host site. The OSG can then run the grid-specific portions from a central location. This provides a new, more centralized, model for running grid services, which complements the traditional distributed model. We will show the architecture of a HTCondor-CE-Bosco enabled site, as well as feedback from multiple sites that have deployed it.

Anisotropic p-f mixing mechanism explaining anomalous magnetic properties in Ce monopnictides

International Nuclear Information System (INIS)

Takahashi, H.; Kasuya, T.

1985-01-01

An anomalously small crystal-field splitting in the paramagnetic region in CeSb and CeBi compared with those in CeP and CeAs is explained by the mixing mechanism between the occupied 4f states and the valence band holes. In the paramagnetic regions, the above p-f mixing gives the effective crystal-field splitting, which is estimated to nearly cancel the normal splittings extrapolated from CeP and CeAs in good agreement with experiment. The formula for the second-order transition temperature, at which the population ratio of the 4f GAMMA 8 states begins to be unbalanced, is also derived. In CeBi the second-order transition may occur, while in CeSb the first-order transition should occur in agreement with experiments. (author)

Performance evaluation of LaBr3: Ce scintillator

International Nuclear Information System (INIS)

Xie Ming; Lin Li; Liu Shihao; Xiao Peng; Xie Qingguo

2012-01-01

The cerium doped lanthanum bromide crystal (LaBr 3 : Ce) is a new kind of scintillator with many advantages such as good energy resolution, high light output, short decay time, good proportionality response. These properties make the LaBr 3 : Ce attractive substantial interest to use in the radiation detection. The energy resolution were investigated with Φ25 × 25 mm LaBr 3 : Ce coupled to a Hamamatsu R8900 photomultiplier tube. Energy resolution of 3.6% (FWHM) have been achieved for 511 keV photons ( 18 F source) at room temperature. Decay time constant of 20 ns have been acquired with a Hamamatsu fast-time-response R9800 photomultiplier tube. The results approve the excellent characterizations of LaBr 3 : Ce and imply its enormous potentiality in the radiation detectors of gamma-ray spectroscopy and PET. (authors)

VUV-UV–vis photoluminescence of Ce{sup 3+} and Ce{sup 3+}-Eu{sup 2+} energy transfer in Ba{sub 2}MgSi{sub 2}O{sub 7}

Energy Technology Data Exchange (ETDEWEB)

Yan, Jing; Liu, Chunmeng; Zhou, Weijie [MOE Key Laboratory of Bioinorganic and Synthetic Chemistry, KLGHEI of Environment and Energy Chemistry, School of Chemistry, Sun Yat-sen University, Guangzhou 510275 (China); Huang, Yan; Tao, Ye [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100039 (China); Liang, Hongbin, E-mail: cesbin@mail.sysu.edu.cn [MOE Key Laboratory of Bioinorganic and Synthetic Chemistry, KLGHEI of Environment and Energy Chemistry, School of Chemistry, Sun Yat-sen University, Guangzhou 510275 (China)

2017-05-15

A series of Ce{sup 3+} doped and Ce{sup 3+}-Eu{sup 2+} co-doped Ba{sub 2}MgSi{sub 2}O{sub 7} phosphors was prepared via a high-temperature solid-state reaction technique. The photoluminescence properties, which include synchrotron radiation VUV-UV excitation spectra, emission spectra and concentration effect, thermal stability of Ce{sup 3+} are investigated. Hence the energies of the crystal field split 5d excited states of Ce{sup 3+} are determined. Due to spectral overlap, the energy transfer from sensitizer Ce{sup 3+} to activator Eu{sup 2+} in Ba{sub 2}MgSi{sub 2}O{sub 7}:Ce{sup 3+}, Eu{sup 2+} occurs, and the mechanism is demonstrated to be an electric dipole−dipole interaction. - Highlights: •The energies of five crystal field split 5d states of Ce{sup 3+} in Ba{sub 2}MgSi{sub 2}O{sub 7} were determined by synchrotron radiation VUV-UV excitation spectrum. •The concentration effect, thermal stability of Ce{sup 3+} were investigated. •The energy transfer from Ce{sup 3+} to Eu{sup 2+} and its influence on luminescence decays of Ce{sup 3+} and Eu{sup 2+} were studied.

The γ rays sensitivity measurement of CeF3 scintillator detector

International Nuclear Information System (INIS)

Hu Mengchun; Zhou Dianzhong; Li Rurong; Wang Zhentong; Yang Hongqiong; Zhang Jianhua; Hu Qingyuan; Peng Taiping

2003-01-01

The CeF 3 is an abio-scintillator developed in recent years, which are insensitive to neutron and sensitive to gamma rays and respond quickness. The relationship of CeF 3 scintillation detector gamma rays sensitivity with the change of crystal thickness was measured. The CeF 3 scintillation detector is composed by high liner current photomultiplier tube of CHφT3, CHφT5 and CeF 3 scintillator. The detector gamma rays sensitivity of purple photocell and common photocell with CeF 3 scintillator were measured too

CE APPROVAL IN ELECTRICAL HOUSEHOLD APPLIANCES AND A CASE STUDY

Directory of Open Access Journals (Sweden)

Nazmi EKREN

2009-01-01

Full Text Available Due to the reason for rapidly developing technology, increasing competition medium, and awareness of the consumers, nowadays, the exigency of production with good quality has gained more and more significance. Certification of the quality and safety of the products to the consumers is compulsory in terms of producers. There are some documents to certify safety of the products. One of them is CE certificate. In this paper, basic information about CE mark is given and CE standards and tests required for electrical household appliances are mentioned. As an application, one of an electrical household appliance, toaster grill is treated and examined. To obtain CE certificate for toaster grill, required tests are made according to EN60335-2-9 and CE certificate is obtained.

Luminescence of Ce3+ doped LaPO4 nanophosphors upon Ce3+ 4f-5d and band-to-band excitation

International Nuclear Information System (INIS)

Stryganyuk, G.; Trots, D.M.; Voloshinovskii, A.; Shalapska, T.; Zakordonskiy, V.; Vistovskyy, V.; Pidzyrailo, M.; Zimmerer, G.

2008-01-01

Luminescence spectral-kinetic studies have been performed for pure and Ce-doped LaPO 4 micro- and nanosized phosphates using synchrotron radiation for the excitation within 5-20 eV energy range at T=8-300 K. Mechanisms for the excitation of Ce 3+ 5d-4f emission as well as the quenching processes are discussed. The influence of surface defects has been considered to modify considerably the luminescent properties of nanosized phosphors upon the excitation in the energy range of Ce 3+ 4f-5d transitions and LaPO 4 host absorption

Preliminary hydrogeologic assessment of a ground-water contamination area in Wolcott, Connecticut

Science.gov (United States)

Stone, J.R.; Casey, G.D.; Mondazzi, R.A.; Frick, T.W.

1997-01-01

Contamination of ground water by volatile organic compounds and inorganic constituents has been identified at a number of industrial sites in the Town of Wolcott, Connecticut. Contamination is also present at a municipal landfill in the City of Waterbury that is upgradient from the industrial sites in the local ground-water-flow system. The study area, which lies in the Western Highlands of Connecticut, is in the Mad River Valley, a tributary to the Naugatuck River. Geohydrologic units (aquifer materials) include unconsolidated glacial sediments (surficial materials) and fractured crystalline (metamorphic) bedrock. Surficial materials include glacial till, coarse-grained andfine-grained glacial stratified deposits, and postglacial floodplain alluvium and swamp deposits. The ground-water-flow system in the surficial aquifer is complex because the hydraulic properties of the surficial materials are highly variable. In the bedrock aquifer, ground water moves exclusively through fractures. Hydrologic characteristics of the crystalline bedrock-degree of confinement, hydraulic conductivity, storativity, and porosity-are poorly defined in the study area. Further study is needed to adequately assess ground-water flow and contaminant migration under current or past hydrologic conditions. All known water-supply wells in the study area obtain water from the bedrock aquifer. Twenty households in a hillside residential area on Tosun Road currently obtain drinking water from private wells tapping the bedrock aquifer. The extent of contamination in the bedrock aquifer and the potential for future contamination from known sources of contamination in the surficial aquifer is of concern to regulatory agencies. Previous investigations have identified ground-water contamination by volatile organic compounds at the Nutmeg Valley Road site area. Contamination has been associated with on-site disposal of heavy metals, chlorinated and non-chlorinated volatile organic compounds, and

HumanViCe: Host ceRNA network in virus infected cells in human

Directory of Open Access Journals (Sweden)

Suman eGhosal

2014-07-01

Full Text Available Host-virus interaction via host cellular components has been an important field of research in recent times. RNA interference mediated by short interfering RNAs and microRNAs (miRNA, is a widespread anti-viral defence strategy. Importantly, viruses also encode their own miRNAs. In recent times miRNAs were identified as key players in host-virus interaction. Furthermore, viruses were shown to exploit the host miRNA networks to suite their own need. The complex cross-talk between host and viral miRNAs and their cellular and viral targets forms the environment for viral pathogenesis. Apart from protein-coding mRNAs, non-coding RNAs may also be targeted by host or viral miRNAs in virus infected cells, and viruses can exploit the host miRNA mediated gene regulatory network via the competing endogenous RNA effect. A recent report showed that viral U-rich non-coding RNAs called HSUR, expressed in primate virus herpesvirus saimiri (HVS infected T cells, were able to bind to three host miRNAs, causing significant alteration in cellular level for one of the miRNAs. We have predicted protein coding and non protein-coding targets for viral and human miRNAs in virus infected cells. We identified viral miRNA targets within host non-coding RNA loci from AGO interacting regions in three different virus infected cells. Gene ontology (GO and pathway enrichment analysis of the genes comprising the ceRNA networks in the virus infected cells revealed enrichment of key cellular signalling pathways related to cell fate decisions and gene transcription, like Notch and Wnt signalling pathways, as well as pathways related to viral entry, replication and virulence. We identified a vast number of non-coding transcripts playing as potential ceRNAs to the immune response associated genes; e.g. APOBEC family genes, in some virus infected cells. All these information are compiled in HumanViCe, a comprehensive database that provides the potential ceRNA networks in virus

Pd/CeO2/SiC Chemical Sensors

Science.gov (United States)

Lu, Weijie; Collins, W. Eugene

2005-01-01

The incorporation of nanostructured interfacial layers of CeO2 has been proposed to enhance the performances of Pd/SiC Schottky diodes used to sense hydrogen and hydrocarbons at high temperatures. If successful, this development could prove beneficial in numerous applications in which there are requirements to sense hydrogen and hydrocarbons at high temperatures: examples include monitoring of exhaust gases from engines and detecting fires. Sensitivity and thermal stability are major considerations affecting the development of high-temperature chemical sensors. In the case of a metal/SiC Schottky diode for a number of metals, the SiC becomes more chemically active in the presence of the thin metal film on the SiC surface at high temperature. This increase in chemical reactivity causes changes in chemical composition and structure of the metal/SiC interface. The practical effect of the changes is to alter the electronic and other properties of the device in such a manner as to degrade its performance as a chemical sensor. To delay or prevent these changes, it is necessary to limit operation to a temperature sensor structures. The present proposal to incorporate interfacial CeO2 films is based partly on the observation that nanostructured materials in general have potentially useful electrical properties, including an ability to enhance the transfer of electrons. In particular, nanostructured CeO2, that is CeO2 with nanosized grains, has shown promise for incorporation into hightemperature electronic devices. Nanostructured CeO2 films can be formed on SiC and have been shown to exhibit high thermal stability on SiC, characterized by the ability to withstand temperatures somewhat greater than 700 C for limited times. The exchanges of oxygen between CeO2 and SiC prevent the formation of carbon and other chemical species that are unfavorable for operation of a SiC-based Schottky diode as a chemical sensor. Consequently, it is anticipated that in a Pd/CeO2/SiC Schottky

Study of the growth of CeO2 nanoparticles onto titanate nanotubes

Science.gov (United States)

Marques, Thalles M. F.; Ferreira, Odair P.; da Costa, Jose A. P.; Fujisawa, Kazunori; Terrones, Mauricio; Viana, Bartolomeu C.

2015-12-01

We report the study of the growth of CeO2 nanoparticles on the external walls and Ce4+ intercalation within the titanate nanotubes. The materials were fully characterized by multiple techniques, such as: Raman spectroscopy, infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The ion exchange processes in the titanate nanotubes were carried out using different concentrations of Ce4+ in aqueous solution. Our results indicate that the growth of CeO2 nanoparticles grown mediated by the hydrolysis in the colloidal species of Ce and the attachment onto the titanate nanotubes happened and get it strongly anchored to the titanate nanotube surface by a simple electrostatic interaction between the nanoparticles and titanate nanotubes, which can explain the small size and even distribution of nanoparticles on titanate supports. It was demonstrated that it is possible to control the amount and size of CeO2 nanoparticles onto the nanotube surface, the species of the Ce ions intercalated between the layers of titanate nanotubes, and the materials could be tuned for using in specific catalysis in according with the amount of CeO2 nanoparticles, their oxygen vacancies/defects and the types of Ce species (Ce4+ or Ce3+) present into the nanotubes.

Luminescence from Ce in sol-gel SiO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Kroon, R.E., E-mail: KroonRE@ufs.ac.za [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa); Seed Ahmed, H.A.A.; Ntwaeaborwa, O.M. [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa); Koao, L.F. [Department of Physics, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa); Nagpure, I.M.; Gusowski, M.A. [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa); Botha, J.R. [Department of Physics, Nelson Mandela Metropolitan University, Box 77000, Port Elizabeth 6031 (South Africa); Swart, H.C. [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa)

2012-05-15

The sol-gel process provides an attractive low temperature alternative to the melt process for producing Ce-doped silica, but reports of the emission wavelength have not been consistent. In this paper, luminescence measurements using a variety of excitation methods, including cathodoluminescence not yet reported by other researchers, are compared and evaluated in the light of previously published data. Several papers report luminescence around 350 nm but emission near this wavelength was not found from our samples. This luminescence originates from Ce that has not yet been incorporated in the silica and is found in samples that have not undergone high temperature annealing. Our photoluminescence results from samples annealed in a reducing atmosphere suggest that emission from Ce incorporated in the silica lattice occurs near 455 nm, and some indication of the emission from Ce in amorphous clusters at 400 nm is also found. However, our results also confirm earlier indications that intrinsic defects in silica can create photoluminescence near both these wavelengths, which can make identification of the luminescence due to Ce difficult. Finally, it has been found that samples which have been annealed in air, and therefore display poor photoluminescence because most of the Ce occurs in the tetravalent form, are luminescent under electron beam excitation. It is suggested that during cathodoluminescence measurements Ce{sup 4+} ions capture electrons to form excited Ce{sup 3+} ions from which the luminescence originates.

Complex impedance study on nano-CeO2 coating TiO2

International Nuclear Information System (INIS)

Zhang Mei; Wang Honglian; Wang Xidong; Li Wenchao

2006-01-01

Titanium dioxide (TiO 2 ) nanoparticles and cerium dioxide (CeO 2 ) nanoparticles coated titanium dioxide (TiO 2 ) nanoparticles (CeO 2 -TiO 2 nanoparticles) have been successfully synthesized by sol-gel method. The complex impedance of the materials was investigated. The grain resistance, boundary resistance and activation energy of the nanoparticles were calculated according to Arrhenius equation. According to calculating results, the active capacity of pure TiO 2 nanoparticles has been improved because of nano-CeO 2 coating. An optimal CeO 2 content of 4.9 mol% was achieved. The high resolution electron microscopy images of CeO 2 -TiO 2 nanoparticles showed that TiO 2 nanoparticles, as a core, were covered by CeO 2 nanoparticles. The average size of CeO 2 coating TiO 2 nanoparticles was about 70 nm. Scanning electron microscopy observation indicted that CeO 2 nanoparticle coating improved the separation, insulation, and stability the CeO 2 -TiO 2 nanoparticles, which was benefit to the activity of materials

Ce doped NiO nanoparticles as selective NO2 gas sensor

Science.gov (United States)

Gawali, Swati R.; Patil, Vithoba L.; Deonikar, Virendrakumar G.; Patil, Santosh S.; Patil, Deepak R.; Patil, Pramod S.; Pant, Jayashree

2018-03-01

Metal oxide gas sensors are promising portable gas detection devices because of their advantages such as low cost, easy production and compact size. The performance of such sensors is strongly dependent on material properties such as morphology, structure and doping. In the present study, we report the effect of cerium (Ce) doping on nickel oxide (NiO) nano-structured thin film sensors towards various gases. Bare NiO and Ce doped NiO nanoparticles (Ce:NiO) were synthesized by sol-gel method. To understand the effect of Ce doping in nickel oxide, various molar percentages of Ce with respect to nickel were incorporated. The structure, phase, morphology and band-gap energy of as-synthesized nanoparticles were studied by XRD, SEM, EDAX and UV-vis spectroscopy. Thin film gas sensors of all the samples were prepared and subjected to various gases such as LPG, NH3, CH3COCH3 and NO2. A systematic and comparative study reveals an enhanced gas sensing performance of Ce:NiO sensors towards NO2 gas. The maximum sensitivity for NO2 gas is around 0.719% per ppm at moderate operating temperature of 150 °C for 0.5% Ce:NiO thin film gas sensor. The enhanced gas sensing performance for Ce:NiO is attributed to the distortion of crystal lattice caused by doping of Ce into NiO.

Down-conversion luminescence from (Ce, Yb) co-doped oxygen-rich silicon oxides

International Nuclear Information System (INIS)

Heng, C. L.; Wang, T.; Su, W. Y.; Wu, H. C.; Yin, P. G.; Finstad, T. G.

2016-01-01

We have studied down-conversion photoluminescence (PL) from (Ce, Yb) co-doped “oxygen rich” silicon oxide films prepared by sputtering and annealing. The Ce"3"+ ∼510 nm PL is sensitive to the Ce concentration of the films and is much stronger for 3 at. % Ce than for 2 at. % Ce after annealing at 1200 °C. The PL emission and excitation spectroscopy results indicate that the excitation of Yb"3"+ is mainly through an energy transfer from Ce"3"+ to Yb"3"+, oxide defects also play a role in the excitation of Yb"3"+ after lower temperature (∼800 °C) annealing. The Ce"3"+ 510 nm photon excites mostly only one Yb"3"+ 980 nm photon. Temperature-dependent PL measurements suggest that the energy transfer from Ce"3"+ to Yb"3"+ is partly thermally activated.

Life cycle costs for disposal and assured isolation of low-level radioactive waste in Connecticut

International Nuclear Information System (INIS)

Chau, B.; Sutherland, A.A.; Baird, R.D.

1998-03-01

This document presents life cycle costs for a low-level radioactive disposal facility and a comparable assured isolation facility. Cost projections were based on general plans and assumptions, including volume projections and operating life, provided by the Connecticut Hazardous Waste Management Service, for a facility designed to meet the State's needs. Life cycle costs include the costs of pre-construction activities, construction, operations, closure, and post-closure institutional control. In order to provide a better basis for understanding the relative magnitude of near-term costs and future costs, the results of present value analysis of ut-year costs are provided

A comparative study of LaBr3(Ce(3+)) and CeBr3 based gamma-ray spectrometers for planetary remote sensing applications.

Science.gov (United States)

Kozyrev, A; Mitrofanov, I; Owens, A; Quarati, F; Benkhoff, J; Bakhtin, B; Fedosov, F; Golovin, D; Litvak, M; Malakhov, A; Mokrousov, M; Nuzhdin, I; Sanin, A; Tretyakov, V; Vostrukhin, A; Timoshenko, G; Shvetsov, V; Granja, C; Slavicek, T; Pospisil, S

2016-08-01

The recent availability of large volume cerium bromide crystals raises the possibility of substantially improving gamma-ray spectrometer limiting flux sensitivities over current systems based on the lanthanum tri-halides, e.g., lanthanum bromide and lanthanum chloride, especially for remote sensing, low-level counting applications or any type of measurement characterized by poor signal to noise ratios. The Russian Space Research Institute has developed and manufactured a highly sensitive gamma-ray spectrometer for remote sensing observations of the planet Mercury from the Mercury Polar Orbiter (MPO), which forms part of ESA's BepiColombo mission. The Flight Model (FM) gamma-ray spectrometer is based on a 3-in. single crystal of LaBr3(Ce(3+)) produced in a separate crystal development programme specifically for this mission. During the spectrometers development, manufacturing, and qualification phases, large crystals of CeBr3 became available in a subsequent phase of the same crystal development programme. Consequently, the Flight Spare Model (FSM) gamma-ray spectrometer was retrofitted with a 3-in. CeBr3 crystal and qualified for space. Except for the crystals, the two systems are essentially identical. In this paper, we report on a comparative assessment of the two systems, in terms of their respective spectral properties, as well as their suitability for use in planetary mission with respect to radiation tolerance and their propensity for activation. We also contrast their performance with a Ge detector representative of that flown on MESSENGER and show that: (a) both LaBr3(Ce(3+)) and CeBr3 provide superior detection systems over HPGe in the context of minimally resourced spacecraft and (b) CeBr3 is a more attractive system than LaBr3(Ce(3+)) in terms of sensitivities at lower gamma fluxes. Based on the tests, the FM has now been replaced by the FSM on the BepiColombo spacecraft. Thus, CeBr3 now forms the central gamma-ray detection element on the MPO spacecraft.

LiCaAlF sub 6 :Ce crystal: a new scintillator

CERN Document Server

Gektin, A V; Neicheva, S; Gavrilyuk, V; Bensalah, A; Fukuda, T; Shimamura, K

2002-01-01

Scintillation properties of LiCaAlF sub 6 :Ce crystal, well known as the effective UV laser material, is reported. Ce sup 3 sup + emission at 286-305 nm with a single exponential decay time of 35 ns provides a scintillation pulse. Radiation damage in pure and Ce-doped crystals is studied. In contrast to the majority of fluoride crystals, cerium is responsible for the ultradeep traps formation revealing thermostimulated luminescence. Overlapping of color center absorption and Ce sup 3 sup + ion emission bands limits the scintillation efficiency of LiCaAlF sub 6 :Ce at high radiation doses.

The role of charge transfer in the oxidation state change of Ce atoms in the TM13-CeO2(111) systems (TM = Pd, Ag, Pt, Au): a DFT + U investigation.

Science.gov (United States)

Tereshchuk, Polina; Freire, Rafael L H; Ungureanu, Crina G; Seminovski, Yohanna; Kiejna, Adam; Da Silva, Juarez L F

2015-05-28

Despite extensive studies of transition metal (TM) clusters supported on ceria (CeO2), fundamental issues such as the role of the TM atoms in the change in the oxidation state of Ce atoms are still not well understood. In this work, we report a theoretical investigation based on static and ab initio molecular dynamics density functional theory calculations of the interaction of 13-atom TM clusters (TM = Pd, Ag, Pt, Au) with the unreduced CeO2(111) surface represented by a large surface unit cell and employing Hubbard corrections for the strong on-site Coulomb correlation in the Ce f-electrons. We found that the TM13 clusters form pyramidal-like structures on CeO2(111) in the lowest energy configurations with the following stacking sequence, TM/TM4/TM8/CeO2(111), while TM13 adopts two-dimensional structures at high energy structures. TM13 induces a change in the oxidation state of few Ce atoms (3 of 16) located in the topmost Ce layer from Ce(IV) (itinerant Ce f-states) to Ce(III) (localized Ce f-states). There is a charge flow from the TM atoms to the CeO2(111) surface, which can be explained by the electronegativity difference between the TM (Pd, Ag, Pt, Au) and O atoms, however, the charge is not uniformly distributed on the topmost O layer due to the pressure induced by the TM13 clusters on the underlying O ions, which yields a decrease in the ionic charge of the O ions located below the cluster and an increase in the remaining O ions. Due to the charge flow mainly from the TM8-layer to the topmost O-layer, the charge cannot flow from the Ce(IV) atoms to the O atoms with the same magnitude as in the clean CeO2(111) surface. Consequently, the effective cationic charge decreases mainly for the Ce atoms that have a bond with the O atoms not located below the cluster, and hence, those Ce atoms change their oxidation state from IV to III. This increases the size of the Ce(III) compared with the Ce(IV) cations, which builds-in a strain within the topmost Ce layer, and

Using computational fluid dynamics to address fish passage concerns at the Grand Falls-Windsor hydroelectric development

International Nuclear Information System (INIS)

Woolgar, R.; Eddy, W.

2006-01-01

As a result of replacing the penstocks used to divert water to the generating station with a power canal, the study of out-migration survival of Atlantic salmon at Abitibi-Consolidated Company of Canada's (Abitibi) Grand Falls-Windsor Hydroelectric Development began in 1997. Using a behavioral louvre system, a fish bypass diversion system was implemented within the power canal. When the power canal first commenced operation in 1997 and after a new 30 MW Unit was installed in 2003, the efficiency of the system to divert the migrating smolt was low. In order to test improvements to the system, physical modeling was conducted at the University of Waterloo between 1997 and 2002. This led to increased efficiencies of fish passage before the new unit was installed. However, recent results of the physical modeling, including the new unit, did not detail the extent of changes required to the system to increase fish bypass efficiency. Abitibi then engaged SGE Acres Limited in the winter of 2004 to investigate alternatives for increasing the effectiveness of the Grand Falls Power Canal Fish Bypass Diversion System. Abitibi then re-engaged SGE Acres in July 2005 for follow-up work after the collection of physical data in the power canal by Environment Canada in June 2005. This paper presented documentation on the original analysis conducted in 2004 and 2005, and the follow-up work conducted in 2005 and 2006. Specifically, the paper discussed the development of a computational fluid dynamics model (FLOW-3D) to represent the existing condition of the power canal; simulations of the existing condition for various flows; review of model results to confirm if the model is representing overall canal hydraulics; simulation of various alternatives to increase fish bypass efficiency; and, selection of a preferred alternative. As part of the follow-up work, the paper presented a review of Environment Canada measurements and comparison with FLOW-3D model results, and additional

Comparison of Efficiencies and Mechanisms of Catalytic Ozonation of Recalcitrant Petroleum Refinery Wastewater by Ce, Mg, and Ce-Mg Oxides Loaded Al2O3

Directory of Open Access Journals (Sweden)

Chunmao Chen

2017-02-01

Full Text Available The use of catalytic ozonation processes (COPs for the advanced treatment of recalcitrant petroleum refinery wastewater (RPRW is rapidly expanding. In this study, magnesium (Mg, cerium (Ce, and Mg-Ce oxide-loaded alumina (Al2O3 were developed as cost efficient catalysts for ozonation treatment of RPRW, having performance metrics that meet new discharge standards. Interactions between the metal oxides and the Al2O3 support influence the catalytic properties, as well as the efficiency and mechanism. Mg-Ce/Al2O3 (Mg-Ce/Al2O3-COP reduced the chemical oxygen demand by 4.7%, 4.1%, 6.0%, and 17.5% relative to Mg/Al2O3-COP, Ce/Al2O3-COP, Al2O3-COP, and single ozonation, respectively. The loaded composite metal oxides significantly increased the hydroxyl radical-mediated oxidation. Surface hydroxyl groups (–OHs are the dominant catalytic active sites on Al2O3. These active surface –OHs along with the deposited metal oxides (Mg2+ and/or Ce4+ increased the catalytic activity. The Mg-Ce/Al2O3 catalyst can be economically produced, has high efficiency, and is stable under acidic and alkaline conditions.

Facile hydrothermal synthesis of CeO2 nanopebbles

Indian Academy of Sciences (India)

Administrator

However, to the best of our knowledge the reports on the synthesis of CeO2 ... The base pressure of the XAS chamber was in the range of 10–8 Pa. A Shimadzu ... scopy was investigated to confirm the crystalline quality of CeO2 nanopebbles.

Study of structural and transport properties of nanostructured CeO{sub 2}, Ce{sub 1-x}Ru{sub x}O{sub 2} and Ce{sub 1-x}In{sub x}O{sub 2} thin films

Energy Technology Data Exchange (ETDEWEB)

Rangel, R.; Chavez-Chavez, L. [Division de Estudios de Posgrado, Facultad de Ingenieria Quimica, Universidad Michoacana de S.N.H. (Mexico); Martinez, E. [Centro de Investigacion en Materiales Avanzados, S.C. (CIMAV), Nuevo Leon (Mexico); Bartolo-Perez, P. [Departamento de Fisica Aplicada, CINVESTAV-IPN, Merida, Yucatan (Mexico)

2012-06-15

The present work reports for the first time thin films prepared from Ce{sub 1-x}M{sub x}O{sub 2-{delta}} (M = Ru, In) solid solutions for application as gas sensors. The CeO{sub 2}, Ce{sub 0.95}Ru{sub 0.05}O{sub 2} and Ce{sub 0.95}In{sub 0.05}O{sub 2} thin films were prepared by means of the RF sputtering process onto Si (111) substrates. The deposition conditions were carried out at 500 C varying the deposition time. Targets were prepared via sol-gel process starting from C{sub 6}H{sub 9}O{sub 6}In, Ru{sub 3}(CO){sub 12} and Ce(C{sub 2}H{sub 3}O{sub 2}){sub 3} . 1.5H{sub 2}O compounds and using a ceramic method to consolidate them. The samples were characterized by means of XRD, SEM, and AFM. Their thickness was measured using a profilometer. The results herein obtained regarding the microstructure and transport properties indicate that these materials can be used as gas sensors. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Ultraviolet and near-infrared luminescence of LaBO3:Ce3+,Yb3+

Science.gov (United States)

Wei, Heng-Wei; Shao, Li-Ming; Jiao, Huan; Jing, Xi-Ping

2018-01-01

Ce3+ or Yb3+ singly doped LaBO3 and Ce3+-Yb3+ co-doped LaBO3 were prepared by conventional solid state reactions at 1100 °C and their photoluminescence (PL) properties were investigated. The emission spectrum of LaBO3:Ce3+,Yb3+ contains both the Ce3+ ultraviolet (UV) emissions (355 nm and 380 nm) and the Yb3+ near infrared (NIR) emission (975 nm) when excited by the UV light at 270 nm. By using the data of the Ce3+ decay curves and the PL intensities of both Ce3+ and Yb3+, the energy transfer efficiency (η) from Ce3+ to Yb3+, the actual energy transfer efficiency (AE) and the quantum efficiency (Q) of the Yb3+ emission were calculated. In the Ce3+-Yb3+ co-doped LaBO3, Ce3+ can transfer its absorbed energy to Yb3+ efficiently (η can be over 60%), and Yb3+ shows the Q value over 50% when it accepts the energy from Ce3+, which results in the low AE value ∼30%. The energy transfer process from Ce3+ to Yb3+ may be understood by the charge transfer mechanism: Ce3+ + Yb3+ ↔ Ce4+ + Yb2+. Particularly the Ce3+-Yb3+ co-doped LaBO3 phosphor gives the emissions mainly in the UV range and the NIR range with a portion of visible emissions in eye-insensitive range. This unique property may be suitable for applications in anti-counterfeiting techniques and public security affairs.

Implementace OpenVPN na platformě Windows CE

OpenAIRE

Ešner, Oldřich

2008-01-01

Motivací pro vznik této diplomové práce, která navazuje na stejnojmenný semestrální projekt, byl převod aplikace pro tvorbu virtuálních privátních sítí OpenVPN z operačního systému Windows XP na platformu Windows CE Embedded 6.0. Práce pojednává obecně o virtuálních privátních sítích, a podrobněji o jedné z jejich implementací - OpenVPN. Uvádí základní vlastnosti operačního systému Windows CE, dále popisuje princip ovladačů zařízení v operačních systémech na bázi Windows NT, používaný Windows...

Investigating the capability of ToF-SIMS to determine the oxidation state of Ce

Science.gov (United States)

Seed Ahmed, H. A. A.; Swart, H. C.; Kroon, R. E.

2018-04-01

The capability of time of flight secondary ion mass spectrometry (ToF-SIMS) to determine the oxidation state of Ce ions doped in a phosphor was investigated. Two samples of SiO2:Ce (4 mol%) with known Ce3+/Ce4+ relative concentrations were subjected to ToF-SIMS measurements. The spectra were very similar and no significant differences in the relative peak intensities were observed that would readily allow one to distinguish Ce3+ from Ce4+. Although ToF-SIMS was therefore not useful to distinguish the charge state of Ce ions doped in this phosphor material, the idea in principle was also tested on two other samples, namely CeF3 and CeF4 These contain Ce as part of the host (i.e. much higher concentration) and are fluorides, which is significant because ToF-SIMS has previously been reported to be able to distinguish Eu2+ from Eu3+ in Eu doped Sr5(PO4)3F phosphor. The spectrum of CeF4 contained a small peak related to Ce4+ which was not observed in the CeF3 spectrum, yet the peak related to the Ce3+ ions was found to be much more intense in the spectrum of CeF4 than CeF3, showing that the ToF-SIMS signals cannot be directly interpreted as retaining the charge state of the ions in the original material. Nevertheless, the significant differences in the Ce-related peaks in the ToF-SIMS spectra from CeF3 and CeF4 show that the charge state of Ce may be distinguished. This study shows that while in principle ToF-SIMS may be used to distinguish the charge state of Ce ions, this depends on the sample and it would not be easy to interpret the spectra without a standard or reference.

A novel gamma-ray detector with submillimeter resolutions using a monolithic MPPC array with pixelized Ce:LYSO and Ce:GGAG crystals

Energy Technology Data Exchange (ETDEWEB)

Kato, T., E-mail: katou.frme.8180@asagi.waseda.jp [Research Institute for Science and Engineering, Waseda University, 3-4-1, Ohkubo, Shinjuku, Tokyo (Japan); Kataoka, J.; Nakamori, T.; Miura, T.; Matsuda, H.; Kishimoto, A. [Research Institute for Science and Engineering, Waseda University, 3-4-1, Ohkubo, Shinjuku, Tokyo (Japan); Sato, K.; Ishikawa, Y.; Yamamura, K.; Nakamura, S.; Kawabata, N. [Solid State Division, Hamamatsu Photonics K. K., 1126-1, Ichino-cho, Hamamatsu, Shizuoka (Japan); Ikeda, H. [ISAS/JAXA, 3-1-1, Yoshinodai, Chuo-ku, Sagamihara-shi, Kanagawa (Japan); Yamamoto, S. [Kobe City College of Technology, 8-3, Gakuenhigashimati, Nishi-ku, Kobe-shi, Hyougo 651-2194 (Japan); Kamada, K. [Materials Research Laboratory, Furukawa Co., Ltd., 1-25-13, Kannondai, Tsukuba, Ibaraki 305-0856 (Japan)

2013-01-21

We have developed a large-area monolithic Multi-Pixel Photon Counter (MPPC) array consisting of 4×4 channels with a three-side buttable package. Each channel has a photosensitive area of 3×3 mm{sup 2} and 3600 Geiger mode avalanche photodiodes (APDs). For typical operational gain of 7.5×10{sup 5} at +20 °C, gain fluctuation over the entire MPPC device is only ±5.6%, and dark count rates (as measured at the 1 p.e. level) amount to ≤400kcps per channel. We first fabricated a gamma-ray camera consisting of the MPPC array with one-to-one coupling to a Ce-doped (Lu,Y){sub 2}(SiO{sub 4})O (Ce:LYSO) crystal array (4×4 array of 3×3×10 mm{sup 3} crystals). Energy and time resolutions of 11.5±0.5% (FWHM at 662 keV) and 493±22ps were obtained, respectively. When using the charge division resistor network, which compiles signals into four position-encoded analog outputs, the ultimate positional resolution is estimated as 0.19 mm in both X and Y directions, while energy resolution of 10.2±0.4% (FWHM) was obtained. Finally, we fabricated submillimeter Ce:LYSO and Ce-doped Gd{sub 3}Ga{sub 3}Al{sub 2}O{sub 12} (Ce:GGAG) scintillator matrices each consisting of 1.0×1.0, 0.7×0.7 and 0.5×0.5 mm{sup 2} pixels, to further improve the spatial resolution. In all types of Ce:LYSO and Ce:GGAG matrices, each crystal was clearly resolved in the position histograms when irradiated by a {sup 137}Cs source. The energy resolutions for 662 keV gamma-rays for each Ce:LYSO and Ce:GGAG scintillator matrix were ≤14.3%. These results suggest excellent potential for its use as a high spatial medical imaging device, particularly in positron emission tomography (PET). -- Highlights: ► We developed a newly designed large-area monolithic MPPC array. ► We obtained fine gain uniformity, and good energy and time resolutions when coupled to the LYSO scintillator. ► We fabricated gamma-ray camera consisting of the MPPC array and submillimeter pixelized LYSO and GGAG scintillators. ► In

Preparation and characterization of Ce-doped HfO{sub 2} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Gálvez-Barboza, S. [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico); Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Av. Industria Metalúrgica # 1062 Parque Industrial, C.P. 25900 Ramos Arizpe, Coahuila (Mexico); González, L.A. [Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Av. Industria Metalúrgica # 1062 Parque Industrial, C.P. 25900 Ramos Arizpe, Coahuila (Mexico); Puente-Urbina, B.A.; Saucedo-Salazar, E.M. [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico); García-Cerda, L.A., E-mail: luis.garcia@ciqa.edu.mx [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico)

2015-09-15

Highlights: • Ce-doped HfO{sub 2} nanoparticles were prepared by a modified solgel method. • Ce-doped HfO{sub 2} nanoparticles have a semispherical shape with sizes between 6 and 11.5 nm. • The samples doped with 10% in weight of Ce directly crystallized in a cubic structure. • A quick, straightforward and effective route for the preparation of Ce-doped nanoparticles. - Abstract: A modified solgel method to synthesize Ce-doped HfO{sub 2} nanoparticles was carried out using a precursor material prepared with cerium nitrate, hafnium chloride, citric acid and ethylene glycol. The obtained precursor material was calcined at 500 and 700 °C for 2 h in air. The influence of the concentration of Ce and the calcination temperature was studied to observe the structural and morphological changes of the obtained materials. For the characterization, X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman scattering (RS) were employed. The XRD patterns shown that the Ce-doped HfO{sub 2} undergoes a structural transformation from monoclinic to cubic phase, which is significantly dependent on the Ce content and calcination temperature. TEM images have also confirmed the existence of semispherical nanoparticles with sizes between 6 and 11.5 nm.

FIRST-PRINCIPLES PHASE DIAGRAM OF THE Ce-Th SYSTEM

International Nuclear Information System (INIS)

Landa, A; Soderlind, P

2005-01-01

Actinide physics has seen a remarkable focus the last decade or so due to the combination of improved experimental diamond-anvil-cell techniques and the development of fast computers and more advanced theory. All f-electron systems are expected to have multiphase phase diagrams due to the sensitivity of the f-electron band to external influences such as pressure and temperature. For instance, compression of an f-electron metal generally causes the occupation of f-states to change due to the shift of these bands relative to others. This can in some cases, as in the Ce-Th system, cause the crystal to adopt a lower symmetry structure at elevated pressures. Here we study the phase stabilities of Ce, Th, and the Ce-Th system as a function of compression. Theoretically, both Ce and Th metals are rather well described within the DFT, although a proper treatment of the Ce-Th alloys has not yet been presented. In the present paper we revisit this problem by applying the modern theory of random alloys based on the coherent potential approximation (CPA)

Surface nucleation and independent growth of Ce(OH)4 within confinement space on modified carbon black surface to prepare nano-CeO2 without agglomeration

Science.gov (United States)

Zhang, Xinyue; Xia, Chunhui; Li, Kaitao; Lin, Yanjun

2018-04-01

Highly dispersed negative carboxyl groups can be formed on carbon black (CB) surface modified with strong nitric acid. Therefore positive cations can be uniformly absorbed by carboxyl groups and precipitated within a confinement space on modified CB surface to prepare highly dispersed nanomaterials. In this paper, the formation and dispersion status of surface negative carboxyl groups, adsorption status of Ce3+, surface confinement nucleation, crystallization and calcination process were studied by EDS, SEM, and laser particle size analysis. The results show that the carboxyl groups formed on modified CB surface are highly dispersed, and Ce3+ cations can be uniformly anchored by carboxyl groups. Therefore, highly dispersed Ce3+ can react with OH- within a confinement surface region to form positive nano-Ce(OH)4 nuclei which also can be adsorbed by electrostatic attraction. After independent growth of Ce(OH)4 without agglomeration, highly dispersed CeO2 nanoparticles without agglomeration can be prepared together with the help of effectively isolates by CO2 released in the combustion of CB.

The magnetic properties of Ce/Pd surface alloys investigated using DFT

KAUST Repository

Shuttleworth, I.G.

2014-06-01

The surface alloys that form between Ce and Pd(1 1 1), Pd(1 0 0) and both unreconstructed and missing-row type Pd(1 1 0) at low Ce coverage ( θCe=19ML) have shown permanent magnetism that is mediated in part by an RKKY-like delocalized Ce 6s-Pd 5s interaction. The Pd 4d states are significantly affected by alloying and their behavior cannot be explained by a purely spin-dependent Hamiltonian. Experimental observations of changes to the Pd 4d states are explained and the implications of Ce/Pd magnetism in reforming catalysis are discussed. © 2014 Elsevier B.V. All rights reserved.

The magnetic properties of Ce/Pd surface alloys investigated using DFT

KAUST Repository

Shuttleworth, I.G.

2014-01-01

The surface alloys that form between Ce and Pd(1 1 1), Pd(1 0 0) and both unreconstructed and missing-row type Pd(1 1 0) at low Ce coverage ( θCe=19ML) have shown permanent magnetism that is mediated in part by an RKKY-like delocalized Ce 6s-Pd 5s interaction. The Pd 4d states are significantly affected by alloying and their behavior cannot be explained by a purely spin-dependent Hamiltonian. Experimental observations of changes to the Pd 4d states are explained and the implications of Ce/Pd magnetism in reforming catalysis are discussed. © 2014 Elsevier B.V. All rights reserved.

Assessing Hubbard-corrected AM05+U and PBEsol+U density functionals for strongly correlated oxides CeO_2 and Ce_2O_3

International Nuclear Information System (INIS)

Weck, Philippe F.; Kim, Eunja

2016-01-01

The structure–property relationships of bulk CeO_2 and Ce_2O_3 have been investigated using AM05 and PBEsol exchange–correlation functionals within the frameworks of Hubbard-corrected density functional theory (DFT+U) and density functional perturbation theory (DFPT+U). Compared with conventional PBE+U, RPBE+U, PW91+U and LDA+U functionals, AM05+U and PBEsol+U describe experimental crystalline parameters and properties of CeO_2 and Ce_2O_3 with superior accuracy, especially when +U is chosen close to its value derived by the linear-response approach. Lastly, the present findings call for a reexamination of some of the problematic oxide materials featuring strong f- and d-electron correlation using AM05+U and PBEsol+U.

Crystal growth and magnetic properties of equiatomic CeAl

Science.gov (United States)

Das, Pranab Kumar; Thamizhavel, A.

2015-03-01

Single crystal of CeAl has been grown by flux method using Ce-Al self-flux. Several needle like single crystals were obtained and the length of the needle corresponds to the [001] crystallographic direction. Powder x-ray diffraction revealed that CeAl crystallizes in orthorhombic CrB-type structure with space group Cmcm (no. 63). The magnetic properties have been investigated by means of magnetic susceptibility, isothermal magnetization, electrical transport, and heat capacity measurements. CeAl is found to order antiferromagnetically with a Neel temperature TN = 10 K. The magnetization data below the ordering temperature reveals two metamagentic transitions for fields less than 20 kOe. From the inverse magnetic susceptibility an effective moment of 2.66 μB/Ce has been estimated, which indicates that Ce is in its trivalent state. Electrical resistivity data clearly shows a sharp drop at 10 K due to the reduction of spin disorder scattering of conduction electrons thus confirming the magnetic ordering. The estimated residual resistivity ratio (RRR) is 33, thus indicating a good quality of the single crystal. The bulk nature of the magnetic ordering is also confirmed by heat capacity data. From the Schottky anomaly of the heat capacity we have estimated the crystal field level splitting energies of the (2J + 1) degenerate ground state as 25 K and 175 K respectively for the fist and second excited states.

Laser clad Ni-base alloy added nano- and micron-size CeO 2 composites

Science.gov (United States)

Zhang, Shi Hong; Li, Ming Xi; Cho, Tong Yul; Yoon, Jae Hong; Lee, Chan Gyu; He, Yi Zhu

2008-07-01

Micron-size Ni-base alloy (NBA) powders are mixed with both 1.5 wt% (%) micron-CeO 2 (m-CeO 2) and also 1.0-3.0% nano-CeO 2 (n-CeO 2) powders. These mixtures are coated on low carbon steel (Q235) by 2.0 kW CO 2 laser cladding. The effects on microstructures, microhardness and wear resistance of the coating by the addition of m- and n-CeO 2 powders to NBA (m- and n-CeO 2/NBA) have been investigated. Addition to the primary phases of γ-Ni, Cr 23C 6 and Ni 3B of NBA coating, CeNi 3 shows up both in m- and n-CeO 2/NBA coatings and CeNi 5 appears only in n-CeO 2/NBA coating. Directional dendrite and coarse equiaxed dendrite are grown in m-CeO 2/NBA coating from interface to central zone, whereas multi-oriented dendrite and fine equiaxed dendrite growth by addition of n-CeO 2. The microhardness and wear resistance of coatings are greatly improved by CeO 2 powder addition, and compared to the addition of 1.0% and 3.0%, 1.5% n-CeO 2/NBA is the best. Hardness and wear resistance of the coating improves with decreasing CeO 2 size from micron to nano.

{sup 115}In NQR studies of CeRhIn{sub 5} and CeCoIn{sub 5} under high pressure

Energy Technology Data Exchange (ETDEWEB)

Kohori, Y. [Department of Physics, Faculty of Science, Chiba University, Chiba 263-8522 (Japan)]. E-mail: kohori@faculty.chiba-u.jp; Taira, H. [Graduate School of Science and Technonogy, Chiba University, Chiba 263-8522 (Japan); Fukazawa, H. [Graduate School of Science and Technonogy, Chiba University, Chiba 263-8522 (Japan); Kohara, T. [Graduate School of Material Science, University of Hyogo, Hyogo 678-1297 (Japan); Iwamoto, Y. [Division of Cargo and Transportation Science, Kobe University, Kobe 658-0022 (Japan); Matsumoto, T. [National Institite of Material Science, Tsukuba 305-0044 (Japan); Maple, M.B. [Department of Physics and Institute for Pure and Applied Physical Science, University of California, San Diego, La Jolla, CA 92093, USA (United States)

2006-02-09

We have carried out{sup 115}In nuclear quadrupole resonance (NQR) measurements in CeRhIn{sub 5} and CeCoIn{sub 5} under presure P. The nuclear spin-lattice relaxation rates, 1/T{sub 1}, of{sup 115}In indicated that the anisotropic superconductivity with line nodes occurred near an antiferromagnetic state. The application of P suppressed the antiferromagnetic, AF, spin fluctuations and moves the system away from the AF state to the non-magnetic Fermi liquid state. The P dependence of 1/T{sub 1} in the superconducting state of CeCoIn{sub 5} shows that the magnitude of the superconducting energy gap scales with its T{sub C} up to 3.0 GPa.

Heteroaggregation, transformation and fate of CeO2 nanoparticles in wastewater treatment

International Nuclear Information System (INIS)

Barton, Lauren E.; Auffan, Melanie; Olivi, Luca; Bottero, Jean-Yves; Wiesner, Mark R.

2015-01-01

Wastewater Treatment Plants (WWTPs) are a key pathway by which nanoparticles (NPs) enter the environment following release from NP-enabled products. This work considers the fate and exposure of CeO 2 NPs in WWTPs in a two-step process of heteroaggregation with bacteria followed by the subsequent reduction of Ce(IV) to Ce(III). Measurements of NP association with solids in sludge were combined with experimental estimates of reduction rate constants for CeO 2 NPs in Monte Carlo simulations to predict the concentrations and speciation of Ce in WWTP effluents and biosolids. Experiments indicated preferential accumulation of CeO 2 NPs in biosolids where reductive transformation would occur. Surface functionalization was observed to impact both the distribution coefficient and the rates of transformation. The relative affinity of CeO 2 NPs for bacterial suspensions in sludge appears to explain differences in the observed rates of Ce reduction for the two types of CeO 2 NPs studied. - Highlights: • We combine experimental and computational methods to track CeO 2 NPs through WWTPs. • We investigate the importance of environmental transformations on NP exposure. • We estimate the concentrations of CeO 2 NPs and reductive transformation byproducts. - CeO 2 nanoparticles that are released to the waste stream will preferentially associate with the solid phase (∼96%), where they will undergo significant transformation (∼50%)

Mental Disorder and Supernatural Influence: Beliefs of Puerto Ricans in Two Connecticut Urban Communities About the Cause and Treatment of Mental Illness.

Science.gov (United States)

Gaviria, Moises; Wintrob, Ronald

This report is based upon information obtained from personal interviews with a representative sample of Puerto Rican adults, both patients and non-patients, 20 years of age and over, living in two urban communities in central Connecticut, with 1,000 and 8,000 Spanish-speaking residents, respectively. The findings of this research are summarized as…

Properties and practical application of thin CeOx films

Directory of Open Access Journals (Sweden)

Maksimchuk N. V.

2010-10-01

Full Text Available The properties of CeOx films produced by various methods have been investigated. According to the comparative analisys “metallic mirror oxidation” method allows to produce films with significantly better characteristics than the «explosive evaporation» method. Though the latter method yields higher photosensitivity of CeOx films and structures on their base. In the process the optimal value of the substrate temperature was determined. Obtained data expand the CeOx application potential in microelectronic sensor sphere.

Gambling severity, impulsivity, and psychopathology: comparison of treatment- and community-recruited pathological gamblers.

Science.gov (United States)

Knezevic, Bojana; Ledgerwood, David M

2012-01-01

Because most studies of pathological gambling gather data from participants recruited from treatment, this study compared community and treatment-enrolled pathological gamblers (PGs) with respect to demographics, gambling severity, impulsivity, and psychopathology. One hundred six PGs were recruited as part of two larger studies in Farmington, Connecticut (n= 61) and Windsor, Ontario (n= 45) using radio advertising, word of mouth, and/or newspaper ads, as well as a gambling treatment program at each location. Community (n= 49) and treatment-enrolled (n= 57) PGs did not differ on age, education, gender, race, employment, or marital status. Treatment-enrolled PGs were more likely to report past year illegal behaviors, preoccupation with gambling, and higher scores on the Barratt Impulsiveness Scale (BIS) Attention Impulsivity subscale. Assessment of psychopathology in the Ontario study indicated that treatment-enrolled PGs were more likely to present with Major Depressive and Dysthymic Disorders. Community-recruited PGs in the Connecticut study were overall more likely to present with any substance use disorder relative to their treatment-enrolled counterparts. Our findings inform intervention and research within the field of pathological gambling. Specifically, the distressing aspects of pathological gambling, such as legal issues, preoccupation with gambling, and depression, may be present more in treatment-enrolled PGs than in those recruited from the community. Such emotional disturbances should be further explored to increase motivation and treatment adherence in PGs. In addition, due to relative absence of overall differences between the groups, research findings utilizing treatment-enrolled PGs may be a good representation of both groups. Copyright © American Academy of Addiction Psychiatry.

Fermi-surface topology of the heavy-fermion system Ce2PtIn8

Science.gov (United States)

Klotz, J.; Götze, K.; Green, E. L.; Demuer, A.; Shishido, H.; Ishida, T.; Harima, H.; Wosnitza, J.; Sheikin, I.

2018-04-01

Ce2PtIn8 is a recently discovered heavy-fermion system structurally related to the well-studied superconductor CeCoIn5. Here we report on low-temperature de Haas-van Alphen-effect measurements in high magnetic fields in Ce2PtIn8 and Pr2PtIn8 . In addition, we performed band-structure calculations for localized and itinerant Ce-4 f electrons in Ce2PtIn8 . Comparison with the experimental data of Ce2PtIn8 and of the 4 f -localized Pr2PtIn8 suggests the itinerant character of the Ce-4 f electrons. This conclusion is further supported by the observation of effective masses in Ce2PtIn8 , which are strongly enhanced with up to 26 bare electron masses.

Highly porous CeO2 nanostructures prepared via combustion synthesis for supercapacitor applications

DEFF Research Database (Denmark)

Kadirvelayutham, Prasanna; Santhoshkumar, P.; Jo, Yong Nam

2017-01-01

We report highly porous CeO2 nanostructures (CeO2 NSs) suitable for supercapacitor applications, synthesized using a fast and cost effective combustion approach. Due to its prominent valence states of Ce3+/Ce4+, CeO2 has emerged as a promising pseudocapacitive material. The drawback of using CeO2...... as a supercapacitor electrode is its poor electrical conductivity. We overcame this drawback of CeO2 by creating oxygen vacancies on its surface, which act to enhance its electrical conductivity. The physical interpretation of the as-synthesized CeO2 NSs shows that they have dense active sites and diffusion pathways...... that enhance the performance of the electrode in a supercapacitor. Electrodes prepared using the synthesized CeO2 NSs exhibited the initial specific capacitance of 134.6 F g-1 and superior cycling stability of 92.5% after 1000 cycles at a constant current density of 1 A g-1, indicating their potential...

Ce activated potassium bromide phosphor for lyoluminescence dosimetry of ionizing radiation

International Nuclear Information System (INIS)

Bhujbal, P.M.; Dhoble, S.J.

2013-01-01

The lyoluminescence (LL) properties of gamma irradiated KBr:Ce phosphor are reported in this paper. The samples were prepared by wet chemical route. The prepared material was characterized by lyoluminescence technique. LL in KBr:Ce have been recorded for different gamma doses. The nature of variation of peak LL intensity is found to be sublinear with gamma irradiation dose, and the peak LL intensity is found to be dependent on concentrations of added Ce in the samples. Negligible fading in the prepared KBr:Ce (0.5 mol%) sample is observed. -- Highlights: • The LL intensities are found to be dependent on concentrations of Ce ion. • The LL intensities are found to be dependent on gamma rays radiation dose. • Dose response of KBr:Ce (0.5 mol%) is observed linear between 0.08 and 1.00 kGy. • The prepared material may be useful for ionizing radiation dosimetry

Room-temperature synthesis and characterization of porous CeO2 thin films

International Nuclear Information System (INIS)

Chu, Dewei; Masuda, Yoshitake; Ohji, Tatsuki; Kato, Kazumi

2012-01-01

CeO 2 thin films with hexagonal-shaped pores were successfully prepared by a facile electrodeposition at room temperature combined with an etching process. By using electrodeposited ZnO nanorods as a soft template, the morphology, and microstructure of the CeO 2 could be controlled. TEM observation indicated that as-prepared CeO 2 film is composed of nanocrystals with average size of several nanometers, while XPS analysis showed the coexistence of Ce 3+ and Ce 4+ in the film. The photoluminescence properties of CeO 2 films were measured, which showed much higher sensitivity compared to bare substrate. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Highly active and durable Ca-doped Ce-SBA-15 catalyst for biodiesel production

International Nuclear Information System (INIS)

Thitsartarn, Warintorn; Maneerung, Thawatchai; Kawi, Sibudjing

2015-01-01

In this work, Ca-doped Ce-incorporated SBA-15 (Ca/CeS) catalyst was successfully synthesized by using direct synthesis of Ce-incorporated SBA-15 followed by impregnation of CaO (calcium oxide). The maximum Si/Ce molar ratio that Ce atoms can be incorporated successfully into the mesoporous framework was found to be 5 (CeS-5). After the impregnation of 30 wt. % Ca, the obtained 30Ca/CeS-5 catalysts showed the superior catalytic performance for transesterification reaction of palm oil with methanol and also the higher catalytic activity as compared to other supported catalysts, i.e. CaO/CeO 2 and CaO–CeO 2 /SBA-15. This can be attributed to the well-dispersion of CaO on the CeS-5 support surface. Furthermore, it was found that the leaching of Si, Ce and Ca from the catalyst into biodiesel produced was negligible (i.e. <1 ppm after 7 cycles), indicating the strong interaction between CaO and CeS-5 support. As a result, the 30Ca/CeS-5 catalyst can be reused at least 15 cycles with insignificant decrease in catalytic activity, offering the efficient CaO-based catalyst for biodiesel production. - Highlights: • Mesoporous Ca-based catalyst was successfully developed for biodiesel production. • Catalyst exhibited high activity towards transesterification (FAME yield > 98%). • Catalyst can be effectively re-used at least 15 cycles. • Extremely low catalyst contaminant (<1 ppm) was presented

Effect of cerium on the corrosion behaviour of sintered (Nd,Ce)FeB magnet

Energy Technology Data Exchange (ETDEWEB)

Yang, Lijing [CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Bi, Mengxue [CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Nano Science and Technology Institute, University of Science and Technology of China, Hefei 230026 (China); Jiang, Jianjun; Ding, Xuefeng [CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Zhu, Minggang; Li, Wei [Functional Materials Research Institute, Central Iron & Steel Research Institute, Beijing 100081 (China); Lv, Zhongshan [Ningbo Shuo Teng new material Co., Ltd., Cixi 315301 (China); Song, Zhenlun, E-mail: songzhenlun@nimte.ac.cn [CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

2017-06-15

Highlights: • A little Ce could promote the magnets for a better corrosion resistance. • With increased Ce contents, the corrosion resistances of magnets decrease. • As the corrosion developed, the magnetic properties decreased. - Abstract: For the balanced consumption of rare-earth elements, cerium (Ce) was partially used for NdFeB magnets instead of Nd. The corrosion behaviour of the (Nd,Ce)FeB magnet with different Ce contents in 3.5% NaCl solution was investigated by SEM, XRD, EDS and electrochemical tests. After immersion, the weight loss was calculated and the magnetic properties of the samples were measured. Results showed that Ce affected the corrosion of the (Nd,Ce)FeB magnet. Compared with the NdFeB magnet without Ce but of the same grade as the magnetic energy product, (Nd,Ce)FeB magnet showed better corrosion resistance. With increased Ce content, the corrosion resistances and magnetic properties of (Nd,Ce)FeB magnets were investigated.

An Update on NiCE Support for BISON

Energy Technology Data Exchange (ETDEWEB)

McCaskey, Alex [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Billings, Jay Jay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Deyton, Jordan H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wojtowicz, Anna [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-09-01

The Nuclear Energy Advanced Modeling and Simulation program (NEAMS) from the Department of Energy s Office of Nuclear Energy has funded the development of a modeling and simulation workflow environment to support the various codes in its nuclear energy scientific computing toolkit. This NEAMS Integrated Computational Environment (NiCE) provides extensible tools and services that enable efficient code execution, input generation, pre-processing visualizations, and post-simulation data analysis and visualization for a large portion of the NEAMS Toolkit. A strong focus for the NiCE development team throughout FY 2015 has been support for the Multiphysics Object Oriented Simulation Environment (MOOSE) and the NEAMS nuclear fuel performance modeling application built on that environment, BISON. There is a strong desire in the program to enable and facilitate the use of BISON throughout nuclear energy research and industry. A primary result of this desire is the need for strong support for BISON in NiCE. This report will detail improvements to NiCE support for BISON. We will present a new and improved interface for interacting with BISON simulations in a variety of ways: (1) improved input model generation, (2) embedded mesh and solution data visualizations, and (3) local and remote BISON simulation launch. We will also show how NiCE has been extended to provide support for BISON code development.

The CE3R Network: current status and future perspectives

Science.gov (United States)

Lenhardt, Wolfgang; Pesaresi, Damiano; Živčić, Mladen; Costa, Giovanni; Kuk, Kresimir; Bondár, István; Duni, Llambro; Spacek, Petr

2016-04-01

In order to improve the monitoring of seismic activities in the border regions and to enhance the collaboration between countries and seismological institutions in Central Europe, the Environment Agency of the Slovenian Republic (ARSO), the Italian National Institute for Oceanography and Experimental Geophysics (OGS), the University of Trieste (UniTS) and the Austrian Central Institute for Meteorology and Geodynamics (ZAMG) established in 2001 the "South Eastern Alps Transfrontier Seismological Network". In May 2014 ARSO, OGS, UniTS and ZAMG agreed to formalize the transfrontier network, to name it "Central and East European Earthquake Research Network", (CE3RN or CE3R Network) in order to locate it geographically since cross-border networks can be established in other areas of the world and to expand their cooperation, including institutions in other countries. The University of Zagreb (UniZG) joined CE3RN in October 2014. The Kövesligethy Radó Seismological Observatory (KRSZO) of the Hungarian Academy of Sciences joined CE3RN in October 2015. The Institute of Geosciences, Energy, Water and Environment (IGEWE) of the Polytechnic University of Tirana joined CE3RN in November 2015. The Institute of Physics of the Earth (IPE) of the Masaryk University in Brno joined CE3RN in November 2015. CE3RN Parties intend to formalize and possibly extend their ongoing cooperation in the field of seismological data acquisition, exchange and use for seismological and earthquake engineering and civil protection purposes. The purpose of this cooperation is to retain and expand the existing cross-border network, specify the rules of conduct in the network management, improvements, extensions and enlargements, enhance seismological research in the region, and support civil protection activities. Since the formal establishment of CE3RN, several common projects have been completed, like the SeismoSAT project for the seismic data center connection over satellite funded by the Interreg

Structure and Chemical Bond of Thermoelectric Ce-Co-Sb Skutterudites

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

The correlations among composition,structure,chemical bond and thermoelectric property of skutterudites CoSb3 and CeCo5Fe3Sb12 have been studied by using density function and discrete variation (DFT-DVM) method.Three models for this study were proposed and calculated by which the "rattling" pattern was described.Model 1 is with Ce in the center,model 2 is with Ce away the center and near to Sb,and model 3 is also with Ce away the center but near to Fe.The calculated results show that in model 3,the ionic bond is the strongest,but the covalent bond is the weakest.Due to the different changes between ionic and covalent bond,there is less difference in the stability among the models 1,2 and 3.Therefore,these different models can exist at the same time,or can translate from one to another more easily.In other words,the "rattling" pattern has taken place.Unfilled model of CoSb3,without Ce and Fe,is called model 4.The covalent bond of Co-Sb or Fe-Sb in models 1,2 and 3 is weaker than that of Co-Sb in model 4,as some electrical cloud of Sb takes part in the covalent bond of Ce-Sb in the filled models.The result is consistent with the experimental result that the thermal conductivity of CeCo5Fe3Sb12 is lower than that of CoSb3,and the thermoelectric property of CeCo5Fe3Sb12 is superior to that of CoSb3.

Optical spectroscopy of Ce{sup 3+} in BaLiF{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Yamaga, M.; Imai, T. [Department of Electrical and Electronic Engineering, Faculty of Engineering, Gifu University, Gifu 501-1193 (Japan); Shimamura, K.; Fukuda, T. [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Honda, M. [Faculty of Science, Naruto University of Education, Naruto 772-8502 (Japan)

2000-04-10

The optical absorption spectrum of Ce{sup 3+} in BaLiF{sub 3} crystals consists of several overlapping broad bands. The Ce{sup 3+} luminescence shows broad bands due to moderate electron-phonon interaction in the 5d excited state. Three distinct Ce{sup 3+} sites in the crystal were assigned from the optical spectra. The luminescence spectrum from the dominant Ce{sup 3+} site has a large Stokes shift ({approx}8300 cm{sup -1}), whereas that from one of the two minor Ce{sup 3+} sites has a Stokes shift of half that magnitude ({approx}4400 cm{sup -1}), assuming that the excitation spectrum is almost the same as for the dominant site. The peaks of the lowest-energy absorption and luminescence bands for the other minor Ce{sup 3+} site are shifted to lower energy, and the Stokes shift energy ({approx}7800 cm{sup -1}) is close to that for the dominant site. These three Ce{sup 3+} sites are assigned to configurations of Ce{sup 3+} accompanied by different charge compensators. This assignment is consistent with preliminary electron spin-resonance results indicating that there exist two tetragonal and two orthorhombic Ce{sup 3+} centres in the absence of the cubic centre. (author)

Adsorption and Reaction of Acetone over CeOX(111) Thin Films

International Nuclear Information System (INIS)

Mullins, David R.; Senanayake, Sanjaya D.; Gordon, Wesley O.; Overbury, Steven H.

2009-01-01

This study reports the interaction of acetone (CH3COCH3), the simplest ketone, with well ordered CeO2(111) thin film surfaces. The fully oxidized CeO2(111) surface shows a weak interaction with acetone with the sole desorption product (TPD) being acetone at 210 K. The chemisorbed molecule binds to the surface as the ?1-acetone species rather than through a bridge-bonded dioxy-configuration. Exposure of a CeO2(111) surface to acetone at 600K removes oxygen as CO and results in the conversion of Ce4+ to Ce3+. Acetone chemisorbs strongly on reduced CeO2-x(111) with molecular acetone desorbing near 500 K. Decomposition also occurs with H2 desorbing between 450 and 600 K and C reacting with O in the ceria to desorb above 650 K. A stable species exists from 200 to 500 K on the reduced surface that has three unique types of C. High resolution C 1s XPS spectra indicate these are Ce-CH2, C-CH3 and C-O species. C k-edge NEXAFS indicates the presence of C(double b ond)C and C(double b ond)O bonds. It is postulated that the intermediate is a carbanion bonded through both O and C atoms to Ce cations.

Preparation and Characterization of Graphite Waste/CeO2 Composites

Science.gov (United States)

Kusrini, E.; Utami, C. S.; Nasruddin; Prasetyanto, E. A.; Bawono, Aji A.

2018-03-01

In this research, the chemical modification of graphite waste with CeO2 was developed and characterized. Graphite waste was pretreated with mechanical to obtain the size 200 mesh (75 μm), and thermal methods at 110°C oven for 6 hours. Here, we demonstrate final properties of graphite before modification (GBM), activated graphite (GA) and graphite/CeO2 composite with variation of 0.5, 1 and 2 g of CeO2 (G0.5; G1; G2). The effect of CeO2 concentration was observed. The presence of cerium in modified graphite samples (G0.5; G1; G2) were analyzed using SEM-EDX. The results show that the best surface area was found in G2 is 26.82 m2/g. The presence of CeO2 onto graphite surface does not significantly increase the surface area of composites.

Selective Synthesis of Mesoporous and Nanorod CeVO4 without Template

International Nuclear Information System (INIS)

Zhu Ling; Li Qin; Li Jiayan; Liu Xiangdong; Meng Jian; Cao Xueqiang

2007-01-01

A simple and efficient method has been established for the selective synthesis of mesoporous and nanorod CeVO 4 with different precursors by sonochemical method. CeVO 4 nanorod can be simply synthesized by ultrasound irradiation of Ce(NO 3 ) 3 and NH 4 VO 3 in aqueous solution without any surfactant or template. While mesoporous CeVO 4 with high specific surface area can be prepared with Ce(NO 3 ) 3 , V 2 O 5 and NaOH in the same way. Mesoporous CeVO 4 has a specific surface area of 122 m 2 g -1 and an average pore size of 5.2 nm; CeVO 4 nanorods have a diameter of about 5 nm, and a length of 100-150 nm. The ultrasound irradiation and ammonia in the reactive solution are two key factors in the formation of such rod-like products. X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG) and differential thermal analyses (DTA), UV/vis absorption spectroscopy and Brunauer-Emmett-Teller (BET) were applied for characterization of the as-prepared products

Luminescence properties of Y3Al5O12:Ce nanoceramics

International Nuclear Information System (INIS)

Zorenko, Yu.; Voznyak, T.; Gorbenko, V.; Zych, E.; Nizankovski, S.; Dan'ko, A.; Puzikov, V.

2011-01-01

Comparative analysis of the luminescent properties of Y 3 Al 5 O 12 :Ce (YAG:Ce) transparent optical ceramics (OS) with those of single crystal (SC) and single crystalline film (SCF) analogues has been performed under excitation by pulsed synchrotron radiation in the fundamental absorption range of YAG host. It has been shown that the properties of YAG:Ce OC are closer to the properties of the SCF counterpart, where Y Al antisite defects are completely absent, rather than to the properties of SC of this garnet with large concentration of Y Al antisite defects. At the same time, the luminescence spectra of YAG:Ce OC show weak emission bands in the 200-470 nm range related to Y Al antisite defects and charged oxygen vacancies (F + and F centers). YAG:Ce OS also possesses significantly larger contribution of slow components in the Ce 3+ luminescence decay under high-energy excitation in comparison with SC and SCF of this garnet due to the involvement of antisite defects, charged oxygen vacancies as well as boundaries of grains in the energy transfer processes from the host to the Ce 3+ ions.

Effect of cerium on the corrosion behaviour of sintered (Nd,Ce)FeB magnet

Science.gov (United States)

Yang, Lijing; Bi, Mengxue; Jiang, Jianjun; Ding, Xuefeng; Zhu, Minggang; Li, Wei; Lv, Zhongshan; Song, Zhenlun

2017-06-01

For the balanced consumption of rare-earth elements, cerium (Ce) was partially used for NdFeB magnets instead of Nd. The corrosion behaviour of the (Nd,Ce)FeB magnet with different Ce contents in 3.5% NaCl solution was investigated by SEM, XRD, EDS and electrochemical tests. After immersion, the weight loss was calculated and the magnetic properties of the samples were measured. Results showed that Ce affected the corrosion of the (Nd,Ce)FeB magnet. Compared with the NdFeB magnet without Ce but of the same grade as the magnetic energy product, (Nd,Ce)FeB magnet showed better corrosion resistance. With increased Ce content, the corrosion resistances and magnetic properties of (Nd,Ce)FeB magnets were investigated.

Geohydrology of the Gallup's Quarry area, Plainfield, Connecticut

Science.gov (United States)

Melvin, Robert L.; Stone, Janet Radway; Craft, Patrick A.; Lane, John W.

1995-01-01

The geohydrology of the Gallup's Quarry area in Plainfield, Connecticut was characterized by the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, to provide a preliminary framework for future remedial efforts. Gallup's Quarry, an inactive sand and gravel pit, was the site of unregulated disposal of an unknown volume of chemical wastes from at least the summer of 1977 until January 1978. Existing information collected for the Connecticut Department of Environmental Protection during 1978-82 showed that ground water beneath Gallup's Quarry and adjacent land to the northwest was contaminated by organic and inorganic compounds. There is also some evidence for contamination of Mill Brook, which is located north and northwest of the disposal areas. Geologic mapping and subsurface data show that unconsolidated surficial materials up to 90 feet thick overlie fractured crystalline bedrock in most of the Gallup's Quarry area. The surficial materials consist primarily of stratified drift and till. Texture changes vertically and laterally within the stratified drift; grain size ranges from very coarse to fine. Till blankets the bedrock surface beneath the stratified drift and is a few feet to as much as 25 feet thick. Bedrock is exposed at land surface in a hill in the southeastern part of the quarry and slopes to depths of up to 90 feet beneath the area west and north of the disposal sites. The bedrock is a dark, fine-grained, fractured and jointed blastomylonite and hornblende gneiss of the Quinebaug Formation. It is likely that a west- northwest-trending fault is present in the bedrock beneath Gallup's Quarry; this fault, if present, may provide a preferential pathway for ground-water flow and contaminant transport. The principal horizontal direction of ground-water flow and movement of dissolved contaminants in the stratified drift was to the northwest of the waste-disposal areas toward Mill Brook in 1978. Estimates of average annual

CeBr3 as a room-temperature, high-resolution gamma-ray detector

International Nuclear Information System (INIS)

Guss, Paul; Reed, Michael; Yuan Ding; Reed, Alexis; Mukhopadhyay, Sanjoy

2009-01-01

Cerium bromide (CeBr 3 ) has become a material of interest in the race for high-resolution gamma-ray spectroscopy at room temperature. This investigation quantified the potential of CeBr 3 as a room-temperature, high-resolution gamma-ray detector. The performance of CeBr 3 crystals was compared to other scintillation crystals of similar dimensions and detection environments. Comparison of self-activity of CeBr 3 to cerium-doped lanthanum tribromide (LaBr 3 :Ce) was performed. Energy resolution and relative intrinsic efficiency were measured and are presented.

Study of magnetic properties of TGa6 with T = Ce, Pr, Nd, Tb, Ho, Dy and of solid solutions Ce(Ga1-x Alx)2

International Nuclear Information System (INIS)

Jerjini, M.

1987-10-01

At low temperature TGa 6 compounds are ordered with a Neel temperature of about 10 K. Magnetic structures are antiferromagnetic for T = Pr or Nd or modulated for T = Tb, Ho or Dy. Ce presents an abnormal behavior in CeGa 6 . Neutron inelastic scattering allows the determination of energy levels in the crystal field of cerium ion and evidences hybridation of 4f and valence electrons. Three magnetic transitions for T 6 . Study of CeGa 6 and solid solutions. Ce(Ga (1-x) Al x ) 2 shows that aluminium insertion reinforces the Kondo effect. For x = O.1 an incommensurable structure subsists at very low temperature. CeGa 2 is ordered with 3 magnetic structures. Magnetic moment is reduced with Al. The study of crystal field by neutron scattering shows that hybridation effects are more important for the compound with x = 0.1 [fr

CE-SAM: a conversational interface for ISR mission support

Science.gov (United States)

Pizzocaro, Diego; Parizas, Christos; Preece, Alun; Braines, Dave; Mott, David; Bakdash, Jonathan Z.

2013-05-01

There is considerable interest in natural language conversational interfaces. These allow for complex user interactions with systems, such as fulfilling information requirements in dynamic environments, without requiring extensive training or a technical background (e.g. in formal query languages or schemas). To leverage the advantages of conversational interactions we propose CE-SAM (Controlled English Sensor Assignment to Missions), a system that guides users through refining and satisfying their information needs in the context of Intelligence, Surveillance, and Reconnaissance (ISR) operations. The rapidly-increasing availability of sensing assets and other information sources poses substantial challenges to effective ISR resource management. In a coalition context, the problem is even more complex, because assets may be "owned" by different partners. We show how CE-SAM allows a user to refine and relate their ISR information needs to pre-existing concepts in an ISR knowledge base, via conversational interaction implemented on a tablet device. The knowledge base is represented using Controlled English (CE) - a form of controlled natural language that is both human-readable and machine processable (i.e. can be used to implement automated reasoning). Users interact with the CE-SAM conversational interface using natural language, which the system converts to CE for feeding-back to the user for confirmation (e.g. to reduce misunderstanding). We show that this process not only allows users to access the assets that can support their mission needs, but also assists them in extending the CE knowledge base with new concepts.

Knolls Atomic Power Laboratory environmental monitoring report, calendar year 2000

International Nuclear Information System (INIS)

2001-01-01

The results of the effluent and environmental monitoring programs at the three Knolls Atomic Power Laboratory (KAPL) Sites are summarized and assessed in this report. Operations at the Knolls Site, Niskayuna, New York and the Kesselring Site, West Milton, New York and site closure activities at the S1C Site, Windsor, Connecticut, continued to have no adverse effect on human health and the quality of the environment during calendar year 2000. The effluent and environmental monitoring programs conducted by KAPL are designed to determine the effectiveness of treatment and control methods, to provide measurement of the concentrations in effluents for comparison with applicable standards, and to assess resultant concentrations in the environment. The monitoring programs include analyses of samples of liquid and gaseous effluents for chemical constituents and radioactivity as well as monitoring of environmental air, water, sediment, and fish. Radiation measurements are also made around the perimeter of each Site and at off-site background locations. Monitoring programs at the S1C Site were reduced in scope during calendar year 2000 due to completion of site dismantlement activities during 1999

Knolls Atomic Power Laboratory environmental monitoring report, calendar year 2000

Energy Technology Data Exchange (ETDEWEB)

None

2001-12-01

The results of the effluent and environmental monitoring programs at the three Knolls Atomic Power Laboratory (KAPL) Sites are summarized and assessed in this report. Operations at the Knolls Site, Niskayuna, New York and the Kesselring Site, West Milton, New York and site closure activities at the S1C Site, Windsor, Connecticut, continued to have no adverse effect on human health and the quality of the environment during calendar year 2000. The effluent and environmental monitoring programs conducted by KAPL are designed to determine the effectiveness of treatment and control methods, to provide measurement of the concentrations in effluents for comparison with applicable standards, and to assess resultant concentrations in the environment. The monitoring programs include analyses of samples of liquid and gaseous effluents for chemical constituents and radioactivity as well as monitoring of environmental air, water, sediment, and fish. Radiation measurements are also made around the perimeter of each Site and at off-site background locations. Monitoring programs at the S1C Site were reduced in scope during calendar year 2000 due to completion of site dismantlement activities during 1999.

Blue emitting KSCN:xCe phosphor for solid state lighting

Energy Technology Data Exchange (ETDEWEB)

Chikte, Devayani, E-mail: devi.awade@gmail.com [G.N. Khalsa College, Matunga, Mumbai 400019 (India); Omanwar, S.K. [Department of Physics, S.G.B. Amravati University, Amravati (India); Moharil, S.V. [Department of Physics, R.T.M. Nagpur University, Nagpur 440010 (India)

2014-01-15

The intense blue emitting phosphor KSCN:xCe (x=0.005, 0.01, 0.02, 0.04) is synthesized by a simple, time saving, economical method of re-crystallization through aqueous solution at 353 K. Photoluminescence measurements showed that the said phosphor exhibits emission with good intensity peaking at 450 nm corresponding to d→f transitions of Ce{sup 3+} ion. The excitation spectra monitored at 450 nm shows small peak at 282 nm and broad intense excitation band peaking at 350 nm. The latter lies in near ultraviolet (350–410 nm) emission of UV LED. The phosphor KSCN:0.02Ce{sup 3+} shows CIE 1931 color coordinates as (0.1484, 0.0602) whereas the commercial blue phosphor BAM:Eu{sup 2+} shows the color co-ordinates as (0.1417, 0.1072), respectively, indicating better color purity for KSCN: 0.02Ce{sup 3+} compared to the BAM:Eu{sup 2+} phosphor. The color coordinates of KSCN: 0.02Ce{sup 3+} phosphor (0.1484, 0.0602) are nearer to the color coordinate for blue color suggested by the color systems EBUPAL/SECAM, sRGB Blue as well as Adobe blue(0.15, 0.06). -- Highlights: • Novel phosphor KSCN:xCe prepared for the first time. • Method is simple, time saving, economical, easy to handle. • Intense, blue, Characteristic Ce{sup 3+} emission at 450 nm. • nUV excitation, suitable for solid state lighting.

Levels in 146Ce and the N = 88 isotones

International Nuclear Information System (INIS)

Gowdy, G.M.; Chrien, R.E.; Chu, Y.Y.

1981-01-01

An investigation of the level structure of 146 Ce following the beta decay of the low-spin isomer of 146 La has been carried out at the ISOL facility TRISTAN at Brookhaven National Laboratory. The half-life for the low spin isomer was found to be 6.0 +- 0.4s. A partial level scheme for 146 Ce below 2 MeV is given. The level energies and some B(E2) values extracted from our data have been compared with IBA-2 calculations done entirely with extrapolated parameters from neighboring Z nuclei in order to check the predictive power of the model. Systematics of the Z = 58 isotopes and N = 88 isotones indicate that although 146 Ce is more deformed than its isotones with Z greater than or equal to 60, the transition to the well-deformed region can probably more correctly be thought to occur after 146 Ce, between N = 88 and N = 90, as it does for Z greater than or equal to 60. The abrupt onset of deformation present in the higher Z isotopes is not seen in the Ce isotopes where the trend is found to be rather smooth throughout

Nanocrystalline Mn-Mo-Ce Oxide Anode Doped Rare Earth Ce and Its Selective Electro-catalytic Performance

Directory of Open Access Journals (Sweden)

SHI Yan-hua

2017-09-01

Full Text Available The anode oxide of nanocrystalline Mn-Mo-Ce was prepared by anode electro-deposition technology, and its nanostructure and selective electro-catalytic performance were investigated using the SEM, EDS, XRD, HRTEM, electrochemical technology and oxygen evolution efficiency testing. Furthermore, the selective electro-catalytic mechanism of oxygen evolution and chlorine depression was discussed. The results show that the mesh-like nanostructure Mn-Mo-Ce oxide anode with little cerium doped is obtained, and the oxygen evolution efficiency for the anode in the seawater is 99.51%, which means a high efficiency for the selective electro-catalytic for the oxygen evolution. Due to the structural characteristics of γ-MnO2, the OH- ion is preferentially absorbed, while Cl- absorption is depressed. OH- accomplishes the oxygen evolution process during the valence transition electrocatalysis of Mn4+/Mn3+, completing the selective electro-catalysis process. Ce doping greatly increases the reaction activity, and promotes the absorption and discharge; the rising interplanar spacing between active (100 crystalline plane promotes OH- motion and the escape of newborn O2, so that the selective electro-catalytic property with high efficient oxygen evolution and chlorine depression is achieved from the nano morphology effect.

Effects of Surfactants on the Performance of CeO2 Humidity Sensor

Directory of Open Access Journals (Sweden)

Chunjie Wang

2014-01-01

Full Text Available Nanosized CeO2 powders were synthesized via hydrothermal method with different types of surfactants (polyethylene glycol (PEG, cetyltrimethylammonium bromide (CTAB, and sodium dodecylbenzenesulfonate (SDBS. X-ray diffraction, Raman spectroscopy, and transmission electron microscopy were utilized to characterize the phase structures and morphologies of the products. The sample with CTAB as surfactant (CeO2-C has the largest specific surface area and the smallest particle size among these three samples. The humidity sensor fabricated by CeO2-C shows higher performance than those used CeO2-P and CeO2-S. The impedance of the CeO2-C sensor decreases by about five orders of magnitude with relative humidity (RH changing from 15.7 to 95%. The response and recovery time are 7 and 7 s, respectively. These results indicate that the performance of CeO2 humidity sensors can be improved effectively by the addition of cationic surfactant.

Numerical error in electron orbits with large ωceδt

International Nuclear Information System (INIS)

Parker, S.E.; Birdsall, C.K.

1989-01-01

We have found that running electrostatic particle codes relatively large ω ce Δt in some circumstances does not significantly affect the physical results. We first present results from a single particle mover finding the correct first order drifts for large ω ce Δt. We then characterize the numerical orbit of the Boris algorithm for rotation when ω ce Δt much-gt 1. Next, an analysis of the guiding center motion is given showing why the first order drift is retained at large ω ce Δt. Lastly, we present a plasma simulation of a one dimensional cross field sheath, with large and small ω ce Δt, with very little difference in the results. 15 refs., 7 figs., 1 tab

Effects of Road Salt on Connecticut's Groundwater: A Statewide Centennial Perspective.

Science.gov (United States)

Cassanelli, James P; Robbins, Gary A

2013-01-01

This study examined the extent to which development and road salting has affected Connecticut's groundwater. We gathered water quality data from different time periods between 1894 and the present and analyzed the data using maps generated with ESRI ArcGIS. Historical reports illustrate a statewide baseline trend of decreasing chloride concentration northward across the State (average, 2 ppm). Since then, statewide chloride concentrations in ground water have increased by more than an order of magnitude on average. Analysis indicates spatial correlation between chloride impacts and major roadways. Furthermore, increases in statewide chloride concentration parallel increases in road salt application. Projected trends suggest that statewide baseline concentrations will increase by an amount equal to five times background levels between the present and the year 2030. The analytical process outlined herein can be readily applied to any region to investigate salt impacts on large spatial and temporal scales. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

On the response of Y 3Al 5O 12: Ce (YAG: Ce) powder scintillating screens to medical imaging X-rays

Science.gov (United States)

Kandarakis, I.; Cavouras, D.; Sianoudis, I.; Nikolopoulos, D.; Episkopakis, A.; Linardatos, D.; Margetis, D.; Nirgianaki, E.; Roussou, M.; Melissaropoulos, P.; Kalivas, N.; Kalatzis, I.; Kourkoutas, K.; Dimitropoulos, N.; Louizi, A.; Nomicos, C.; Panayiotakis, G.

2005-02-01

The aim of this study was to examine Y 3Al 5O 12:Ce (also known as YAG:Ce) powder scintillator under X-ray imaging conditions. This material shows a very fast scintillation decay time and it has never been used in X-ray medical imaging. In the present study various scintillator layers (screens) with coating thickness ranging from 13 to 166 mg/cm 2 were prepared in our laboratory by sedimentation of Y 3Al 5O 12: Ce powder. Optical emission spectra and light emission efficiency (spectrum area over X-ray exposure) of the layers were measured under X-ray excitation using X-ray tube voltages (80-120 kVp) often employed in general medical radiography and fluoroscopy. Spectral compatibility with various optical photon detectors (photodiodes, photocathodes, charge coupled devices, films) and intrinsic conversion efficiency values were determined using emission spectrum data. In addition, parameters related to X-ray detection, energy absorption efficiency and K-fluorescence characteristic emission were calculated. A theoretical model describing radiation and light transfer through scattering media was used to fit experimental data. Intrinsic conversion efficiency (η≈0.03-0.05) and light attenuation coefficients (σ≈26.5 cm/g) were derived through this fitting. Y 3Al 5O 12:Ce showed peak emission in the wavelength range 530-550 nm. The light emission efficiency was found to be maximum for the 107 mg/cm 2 layer. Due to its "green" emission spectrum, Y 3Al 5O 12:Ce showed excellent compatibility (of the order of 0.9) with the sensitivity of many currently used photodetectors. Taking into account its very fast response Y 3Al 5O 12:Ce could be considered for application in X-ray imaging especially in various digital detectors.

On the response of Y3Al5O12: Ce (YAG: Ce) powder scintillating screens to medical imaging X-rays

International Nuclear Information System (INIS)

Kandarakis, I.; Cavouras, D.; Sianoudis, I.; Nikolopoulos, D.; Episkopakis, A.; Linardatos, D.; Margetis, D.; Nirgianaki, E.; Roussou, M.; Melissaropoulos, P.; Kalivas, N.; Kalatzis, I.; Kourkoutas, K.; Dimitropoulos, N.; Louizi, A.; Nomicos, C.; Panayiotakis, G.

2005-01-01

The aim of this study was to examine Y 3 Al 5 O 12 :Ce (also known as YAG:Ce) powder scintillator under X-ray imaging conditions. This material shows a very fast scintillation decay time and it has never been used in X-ray medical imaging. In the present study various scintillator layers (screens) with coating thickness ranging from 13 to 166mg/cm 2 were prepared in our laboratory by sedimentation of Y 3 Al 5 O 12 : Ce powder. Optical emission spectra and light emission efficiency (spectrum area over X-ray exposure) of the layers were measured under X-ray excitation using X-ray tube voltages (80-120kVp) often employed in general medical radiography and fluoroscopy. Spectral compatibility with various optical photon detectors (photodiodes, photocathodes, charge coupled devices, films) and intrinsic conversion efficiency values were determined using emission spectrum data. In addition, parameters related to X-ray detection, energy absorption efficiency and K-fluorescence characteristic emission were calculated. A theoretical model describing radiation and light transfer through scattering media was used to fit experimental data. Intrinsic conversion efficiency (ηC ∼0.03-0.05) and light attenuation coefficients (σ∼26.5cm 2 /g) were derived through this fitting. Y 3 Al 5 O 12 :Ce showed peak emission in the wavelength range 530-550nm. The light emission efficiency was found to be maximum for the 107mg/cm 2 layer. Due to its 'green' emission spectrum, Y 3 Al 5 O 12 :Ce showed excellent compatibility (of the order of 0.9) with the sensitivity of many currently used photodetectors. Taking into account its very fast response Y 3 Al 5 O 12 :Ce could be considered for application in X-ray imaging especially in various digital detectors

Oxidative Ce"3"+ sequestration by fungal manganese oxides with an associated Mn(II) oxidase activity

International Nuclear Information System (INIS)

Zheng, Haisu; Tani, Yukinori; Naitou, Hirotaka; Miyata, Naoyuki; Tojo, Fuyumi

2016-01-01

Sequestration of Ce"3"+ by biogenic manganese oxides (BMOs) formed by a Mn(II)-oxidizing fungus, Acremonium strictum strain KR21-2, was examined at pH 6.0. In anaerobic Ce"3"+ solution, newly formed BMOs exhibited stoichiometric Ce"3"+ oxidation, where the molar ratio of Ce"3"+ sequestered (Ce_s_e_q) relative to Mn"2"+ released (Mn_r_e_l) was maintained at approximately two throughout the reaction. A similar Ce"3"+ sequestration trend was observed in anaerobic treatment of BMOs in which the associated Mn(II) oxidase was completely inactivated by heating at 85 °C for 1 h or by adding 50 mM NaN_3. Aerobic Ce"3"+ treatment of newly formed BMO (enzymatically active) resulted in excessive Ce"3"+ sequestration over Mn"2"+ release, yielding Ce_s_e_q/Mn_r_e_l > 200, whereas heated or poisoned BMOs released a significant amount of Mn"2"+ with lower Ce"3"+ sequestration efficiency. Consequently, self-regeneration by the Mn(II) oxidase in newly formed BMO effectively suppressed Mn"2"+ release and enhanced oxidative Ce"3"+ sequestration under aerobic conditions. Repeated treatments of heated or poisoned BMOs under aerobic conditions confirmed that oxidative Ce"3"+ sequestration continued even after most Mn oxide was released from the solid phase, indicating auto-catalytic Ce"3"+ oxidation at the solid phase produced through primary Ce"3"+ oxidation by BMO. From X-ray diffraction analysis, the resultant solid phases formed through Ce"3"+ oxidation by BMO under both aerobic and anaerobic conditions consisted of cerianite with crystal sizes of 5.00–7.23 Å. Such nano-sized CeO_2 (CeO_2_,_B_M_O) showed faster auto-catalytic Ce"3"+ oxidation than that on well-crystalized cerianite under aerobic conditions, where the normalized pseudo-first order rate constants for auto-catalytic Ce"3"+ oxidation on CeO_2_,_B_M_O was two orders of magnitude higher. Consequently, we concluded that Ce"3"+ contact with BMOs sequesters Ce"3"+ through two oxidation paths: primary Ce"3

The Fermi surface of CeSb

International Nuclear Information System (INIS)

Crabtree, G.W.; Aoki, H.; Joss, W.; Hulliger, F.

1987-01-01

This paper uses accurate Fermi surface measurements as a test of hybridization models in CeSb. Detailed measurements of the Fermi surface geometry and effective masses are presented which show a number of unusual properties associated with the magnetic structure and anisotropy. Measurements are compared with predictions of a band structure in which the f-electron is assumed to be local, interacting with the conduction electrons only through anisotropic Coulomb and exchange interactions. This model reproduces all the unusual features observed in the measurements and suggests that hybridization is not essential to describing the electronic properties of CeSb

Photoluminescence analysis of Ce3+:Zn2SiO4 & Li++ Ce3+:Zn2SiO4: phosphors by a sol-gel method

Science.gov (United States)

Babu, B. Chandra; Vandana, C. Sai; Guravamma, J.; Rudramadevi, B. Hemalatha; Buddhudu, S.

2015-06-01

Here, we report on the development and photoluminescence analysis of Zn2SiO4, Ce3+:Zn2SiO4 & Li+ + Ce3+: Zn2SiO4 novel powder phosphors prepared by a sol-gel technique. The total amount of Ce3+ ions was kept constant in this experiment at 0.05 mol% total doping. The excitation and emission spectra of undoped (Zn2SiO4) and Ce3+ doped Zn2SiO4 and 0.05 mol% Li+ co-doped samples have been investigated. Cerium doped Zn2SiO4 powder phosphors had broad blue emission corresponding to the 2D3/2→2FJ transition at 443nm. Stable green-yellow-red emission has been observed from Zn2SiO4 host matrix and also we have been observed the enhanced luminescence of Li+ co-doped Zn2SiO4:Ce3+. Excitation and emission spectra of these blue luminescent phosphors have been analyzed in evaluating their potential as luminescent screen coating phosphors.

Intermediate Ce{sup 3+} defect level induced photoluminescence and third-order nonlinear optical effects in TiO{sub 2}-CeO{sub 2} nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Divya, S.; Nampoori, V.P.N.; Radhakrishnan, P.; Mujeeb, A. [Cochin University of Science and Technology, International School of Photonics, Cochin, Kerala (India)

2014-02-15

We report on the linear and nonlinear optical studies of TiO{sub 2}-CeO{sub 2} nanocomposites. It was found that the band gap of the nanocomposite can be tuned by varying Ce/Ti content. Nonlinear absorption characteristics of these samples were studied by employing open aperture Z-scan technique using an Nd:YAG laser (532 nm, 7 ns, 10 Hz). It has been observed that as the CeO{sub 2} amount increases, band gap of the nanocomposites decreases and the reason proposed for the change in band gap is the smudging of localised states of Ce{sup 3+} into the forbidden energy gap, thus acting as the intermediate state. Fluorescence studies confirmed the above argument. Nonlinear investigation revealed that with increase in the CeO{sub 2} amount, the two-photon absorption coefficient increased due to the modification of TiO{sub 2} dipole symmetry. Suitable candidature of the nanocomposites for the fabrication of nonlinear optical devices was proved by determining the optical limiting threshold. (orig.)

/sup 144/Ce in tissue of beagle dogs after inhalation of CeCl/sub 3/ with special emphasis on endocrine glands and reproductive organs

Energy Technology Data Exchange (ETDEWEB)

Cuddihy, R G; Boecker, B B; McClellan, R O; Kanapilly, G M [Lovelace Foundation for Medical Education and Research, Albuquerque, N.Mex. (USA)

1976-01-01

Beagle dogs inhaled aerosols containing /sup 144/CeCl/sub 3/. Deposition of /sup 144/Ce in tissues was determined in serially sacrificed dogs to characterize radiation dose patterns at early times after exposure. Uptakes of /sup 144/Ce in endocrine glands and reproductive organs were also measured; radiation doses were calculated and those doses were compared with the doses to the major organs of deposition - lung, liver and skeleton. Integrated radiation doses in pituitary and adrenal glands, pancreas, ovaries, testes, prostate and uterus were less than 2 % of those in lung and liver, while the thyroid dose was about 30 % of the dose in liver. These findings were consistent with previously reported biological responses in beagle dogs exposed to high levels of /sup 144/CeCl/sub 3/ wherein no radiation effects related to endocrine glands or the reproductive system have been observed. Use of these results in predicting the dosimetry of /sup 144/Ce in exposed humans re-emphasized the importance of radiation damage to lung, liver, skeleton and gastrointestinal tract compared to other organ systems.

Nonstoichiometry and stability in water of undoped SrCeO3

Directory of Open Access Journals (Sweden)

Jurado, J. R.

2003-10-01

Full Text Available Strontium cerate is the parent phase of an important class of proton-conducting perovskites with various potential technological applications. Phase formation and structure of SrCeO3 with Sr:Ce nonstoichiometry have been investigated for the series, Sr1±xCeO3±δ (0.98 ≤ x ≤ 1.04. Analyses by EPMA (electron probe micro analysis and X-ray diffraction (XRD indicate that, for samples sintered at 1350°C, the main phase is Sr-rich for all x. The accommodation of excess SrO in the bulk phase and/or intergranular regions is discussed. The stability of nominally stoichiometric SrCeO3 was examined in an atmosphere of high water vapour partial pressure (pH2O for 2 hours, degrading to Sr(OH2.H2O and CeO2 for pH2O ≥ 3.6atm.La fase SrCeO3 da origen a una importante familia de perovskitas conductoras protónicas con potenciales aplicaciones tecnológicas. En este trabajo se estudia la formación de la fase y la estructura de SrCeO3 con la relación Sr:Ce no estequiométrica para la serie Sr1±xCeO3±δ (0.98 ≤ x ≤ 1.04. Los análisis por microsonda (EPMA y difracción de rayos X (DRX indican que en las muestras sinterizadas a 1350°C, la fase principal es rica en estroncio para todo valor de x. Se discute la posible ubicación del exceso de SrO tanto en la región intergranular como en el propio grano. También se examina la estabilidad de la composición con estequiometría nominal SrCeO3 en una atmosfera con una alta presión de vapor de agua (pH2O, observándose que la degradación a Sr(OH2.H2O y CeO2 ocurre a pH2O ≥ 3.6atm (expuesto durante 2 horas.

Synthesis, characterization, and ecotoxicity of CeO{sub 2} nanoparticles with differing properties

Energy Technology Data Exchange (ETDEWEB)

Alam, Bushra [Aero Shade Technologies Inc (United States); Philippe, Allan, E-mail: philippe@uni-landau.de; Rosenfeldt, Ricki R.; Seitz, Frank [University of Koblenz-Landau, Group of Environmental and Soil Chemistry, Institute for Environmental Sciences (Germany); Dey, Sonal [SUNY Polytechnic Institute, Colleges of Nanoscale Science and Engineering (United States); Bundschuh, Mirco; Schaumann, Gabriele E. [University of Koblenz-Landau, Group of Environmental and Soil Chemistry, Institute for Environmental Sciences (Germany); Brenner, Sara A. [SUNY Polytechnic Institute, Colleges of Nanoscale Science and Engineering (United States)

2016-10-15

CeO{sub 2} nanoparticles with various characteristics find an increasing number of applications in the electronic, medical, and other industries and are therefore likely released in the environment. This calls for investigations linking the physicochemical properties of these particles with their potential environmental impacts. In this study, CeO{sub 2} nanoparticle powders were prepared using three different precursors [Ce(NO{sub 3}){sub 3}, CeCl{sub 3}, and Ce(CH{sub 3}COO){sub 3}] and annealing temperatures (300, 500, and 700 °C). This procedure resulted in nine different types of nanoparticles with differing size (5–90 nm), morphology, surface Ce{sup 3+}/Ce{sup 4+} ratio, and slightly different crystal structures as characterized using transmission electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, and X-ray diffraction measurements with Rietveld refinement. These CeO{sub 2} nanoparticles underwent toxicity testing at concentrations up to 64 mg L{sup −1} using Daphnia magna. Toxic effects were observed for three particle types with EC50 values between 5 and 64 mg L{sup −1}. No clear correlation was observed between the physicochemical properties (size, shape, oxygen occupancy, Ce{sup 3+}/Ce{sup 4+} ratio) of the nanoparticles and their toxicity. However, toxicity was correlated with the amount of Ce remaining suspended in the test medium after 24 h. This indicated that toxic effects may depend on the colloidal stability of CeO{sub 2} nanoparticles during the first day of exposure. Therefore, being readily suspended and remaining stable for several days in the aquatic media increases the likelihood that CeO{sub 2} nanoparticles will cause unwanted adverse effects.

Luminescence properties of LiPrxCe1-xP4O12

International Nuclear Information System (INIS)

Shalapska, T.; Stryganyuka, G.; Trotsc, D.; Demkiv, T.; Gektin, A.; Voloshinovskii, A.; Dorenbos, P.

2010-01-01

LiPr 1-x Ce x P 4 O 12 (x=0, 0.002, 0.02; 0.1) powder samples were prepared using the melt solution technique. Luminescent parameters of LiPr 1-x Ce x P 4 O 12 phosphors have been investigated under ultraviolet-vacuum ultraviolet (3-12 eV) synchrotron radiation and X-rays excitation at room and near liquid He temperatures. Excitation luminescence spectra of Ce 3+ emission, luminescent spectra and decay curves from the lower excited state levels of the 4f 1 5d 1 and 5d 1 electronic configuration of the Pr 3+ and Ce 3+ , respectively, clearly indicate energy transfer from Pr 3+ to Ce 3+ . Energy migration proceeds via the Pr-sublattice followed by nonradiation transfer from Pr 3+ to Ce 3+ ions.

Ethylene Glycol Adsorption and Reaction over CeOX(111) Thin Films

Energy Technology Data Exchange (ETDEWEB)

T Chen; D Mullins

2011-12-31

This study reports the interaction of ethylene glycol with well-ordered CeO{sub x}(111) thin film surfaces. Ethylene glycol initially adsorbs on fully oxidized CeO{sub 2}(111) and reduced CeO{sub 2-x}(111) through the formation of one C-O-Ce bond and then forms a second alkoxy bond after annealing. On fully oxidized CeO{sub 2}(111) both recombination of ethylene glycol and water desorption occur at low temperature leaving stable -OCH{sub 2}CH{sub 2}O- (ethylenedioxy) intermediates and oxygen vacancies on the surface. This ethylenedioxy intermediate goes through C-C bond scission to produce formate species which then react to produce CO and CO{sub 2}. The formation of water results in the reduction of the ceria. On a reduced CeO{sub 2-x}(111) surface the reaction selectivity shifts toward a dehydration process. The ethylenedioxy intermediate decomposes by breaking a C-O bond and converts into an enolate species. Similar to the reaction of acetaldehyde on reduced CeO{sub 2-x}(111), the enolate reacts to produce acetaldehyde, acetylene, and ethylene. The loss of O from ethylene glycol leads to a small amount of oxidation of the reduced ceria.

Novel hydrogen decrepitation behaviors of (La, Ce)-Fe-B strips

Science.gov (United States)

Jin, Jiaying; Bai, Guohua; Zhang, Yujing; Peng, Baixing; Liu, Yongsheng; Ma, Tianyu; Yan, Mi

2018-05-01

La and Ce substitution for Nd in the 2:14:1-type sintered magnet is of commercial interest to reduce the material cost and to balance the utilization of rare earth (RE) sources. As hydrogen decrepitation (HD) is widely utilized to prepare the magnetic powders during magnets fabrication, incorporating La and Ce into the Nd-Fe-B permanent magnets, however, may exert complex influences on the decrepitation behavior. In the present work, through a comparative study of the HD behaviors between the (La, Ce)-Fe-B strips and the conventional Nd-Fe-B ones, we find that similar to the Nd-Fe-B system, increasing hydrogen pressures from 2.5 to 5.5 MPa do not break the 2:14:1 tetragonal structure of (La, Ce)-Fe-B strips. The enhanced hydrogen absorption behaviors are observed with increasing pressure, which are still inferior to that of the Nd-Fe-B strips. This should be ascribed to the higher oxygen affinity of La and Ce than that of Nd, leading to the decreased amount of active RE-rich phase and limited hydrogen diffusion channel. As a result, the hydrogen absorption of 2:14:1 matrix phase is significantly suppressed, dramatically weakening the exothermic effect. This finding suggests that La and Ce with stable 2:14:1 tetragonal structure upon HD process are promising alternatives for Nd, despite that more precise oxygen control is necessary for the microstructure modification and magnetic performance enhancement of (La, Ce)-Fe-B sintered magnets.

Investigation into kinetics of redox interaction in the system Ce(4). beta. -diketonate-additional ligand

Energy Technology Data Exchange (ETDEWEB)

Anufrieva, S.I.; Snezhko, N.I.; Pechurova, N.I.; Martynenko, L.N.; Spitsyn, V.I. (Moskovskij Gosudarstvennyj Univ. (USSR))

1981-07-01

The rate of reduction of ..beta..-diketonate complexes of Ce(4) to Ce(3) ..beta..-diketonates in benzene solution in the presence and in the absence of additional ligands is studied using spectrophotometry. The rate of reduction of Ce(4) ..beta..-diketonates increases in the series Ce(TTFA)/sub 4/<Ce(DPM)/sub 4/<Ce(DBM)/sub 4/<Ce(BA)/sub 4/<Ce(AA)/sub 4/ (TTFA - thenoyltrifluoroacetone, DPM- --dipivaloylmethane, DBM - dibenzoylmethane, BA benzoylacetone, AA - acetylacetone). The studied phosphorus-containing additional ligands as to their effect on the rate of Ce (4) reduction can be arranged in the following order: trioctylphosphine oxide>triphenylphosphine oxide>tributyl phosphate.

Non-aqueous CE-MS of cinchona alkaloids - characterizationof a novel CE-ESI-MS interface

DEFF Research Database (Denmark)

Hansen, Frederik André; Hansen, Steen Honoré; Petersen, Nickolaj J.

We have recently in our group at the University of Copenhagen developed a robust and simple sheatless CE-ESI-MS interface (capillary electrophoresis – electrospray ionization-mass spectrometry). In this presentation the interface is characterized and compared with HPLC-MS for studying...... a submicron fracture in the capillary close the ESI tip. The fracture provides a zero dead volume and excellent conducting properties due to the large amount of ions in the electric double layer. Electric current exceeding the upper limit of CE instrumentation of up to 300 µA can easily be obtained....... Furthermore, the increased conductivity of the buffer in the fracture generates field free pumping of the analytes towards the ESI spray tip. In this study the device was used to analyze the four major alkaloids (diastereomeric pairs of quinine/quinidine and cinchonine/cinchonidine) in Cinchona bark samples...

The challenges facing today's operators

Energy Technology Data Exchange (ETDEWEB)

Walach, T. [Canadian District Energy Association, Vaughan, ON (Canada)

2004-07-01

A summary of how the Northwind Windsor plant operates was presented along with reasons why it is advantageous to get connected to a district heating system. The plant is a joint venture between Exelon Thermal Technologies and Ontario Power Generation. The plant produces and sells hot water, chilled water, steam and electricity to the Windsor Utilities Commission. Energy is then piped out to buildings in the area, including the Art Gallery of Windsor, the Royal Bank Business Centre, the Windsor Justice Facility, the Windsor Casino, and Northwind Windsor. The energy, which is transferred through heat exchangers, is used for space heating, domestic hot water heating, and air conditioning. The plant offers less management costs, lower energy costs, a lower level of risk management, stable energy rates, better use of building space, reliable service, and a cleaner environment. However, operators face significant challenges in terms of plant operation. They must be knowledgeable in the operation and maintenance of innovative equipment, and must have detailed information regarding operating efficiencies. District Energy requires more complex plants that use various energy saving technologies that deliver a broad range of energy types.

Magnetism and superconductivity of CePt3Si and Ce1+xPt3+ySi1+z

International Nuclear Information System (INIS)

Motoyama, Gaku; Yamamoto, Suguru; Takezoe, Hiroaki; Oda, Yasukage; Ueda, Ko-ichi; Kohara, Takao

2006-01-01

We measured the dc magnetization, electrical resistivity, and ac magnetic susceptibility of a series of polycrystalline CePt 3 Si samples whose compositions vary slightly from the stoichiometric composition. The sample that showed the most distinct anitiferromagnetic transition at 2.2K was found to be Ce 1.01 Pt 3 Si annealed. This sample showed a clear bulk antiferromagnetic order at 2.2 K even in both electrical resistivity and dc magnetization measurements, although the characteristic change in dc magnetization at 2.2 K was found to be small and to be easily masked in other magnetic anomalies if they exist. Moreover, it had the largest residual resistivity ratio. We concluded that Ce 1.01 Pt 3 Si annealed has the intrinsic bulk properties of ideal CePt 3 Si. In addition, we revealed that some anomalies arise as a result of the variation in composition. One is a ferromagnetic anomaly at 3.0 K in the Pt-rich samples, and the other is an antiferromagnetic anomaly at 4.0 K in the Pt-poor samples. The two magnetic anomalies seemed to appear in small domains in the samples that exhibited an antiferromagnetic order at 2.2 K. To reveal the relationship between these magnetisms and superconductivity, we measured ac magnetic susceptibility down to ∼14mK. We found that the superconducting transition temperature is suppressed by the ferromagnetic anomaly. (author)

Properties of Ce-doped ITO films deposited on polymer substrate by DC magnetron sputtering

International Nuclear Information System (INIS)

Kang, Y.M.; Kwon, S.H.; Choi, J.H.; Cho, Y.J.; Song, P.K.

2010-01-01

Ce-doped indium tin oxide (ITO:Ce) films were deposited on flexible polyimide substrates by DC magnetron sputtering using ITO targets containing various CeO 2 contents (CeO 2 : 0, 0.5, 3.0, 4.0, 6.0 wt.%) at room temperature and post-annealed at 200 o C. The crystallinity of the ITO films decreased with increasing Ce content, and it led to a decrease in surface roughness. In addition, a relatively small change in resistance in dynamic stress mode was obtained for ITO:Ce films even after the annealing at high temperature (200 o C). The minimum resistivity of the amorphous ITO:Ce films was 3.96 x 10 -4 Ωcm, which was deposited using a 3.0 wt.% CeO 2 doped ITO target. The amorphous ITO:Ce films not only have comparable electrical properties to the polycrystalline films but also have a crystallization temperature > 200 o C. In addition, the amorphous ITO:Ce film showed stable mechanical properties in the bended state.

Room-temperature ferromagnetism in pure and Co doped CeO2 powders

International Nuclear Information System (INIS)

Wen Qiye; Zhang Huaiwu; Song Yuanqiang; Yang Qinghui; Zhu Hao; Xiao, John Q

2007-01-01

We report the room-temperature (RT) ferromagnetism (FM) observed in pure and Co doped CeO 2 powder. An insulating nonmagnetic CeO 2 single crystal, after grinding into fine powder, shows an RT-FM with a small magnetization of 0.0045 emu g -1 . However, the CeO 2 powder became paramagnetic after oxygen annealing, which strongly suggests an oxygen vacancy meditated FM ordering. Furthermore, by doping Co into CeO 2 powder the FM can significantly enhance through a F-centre exchange (FCE) coupling mechanism, in which both oxygen vacancies and magnetic ions are involved. As the Co content increases, the FM of Co doped CeO 2 initially increases to a maximum 0.47 emu g -1 , and then degrades very quickly. The complex correlation between the Co content and saturation magnetization was well interpreted by supposing the coexistence of three subsets of Co ions in CeO 2 . Our results reveal that the large RT-FM observed in Co doped CeO 2 powder originates from a combination effect of oxygen vacancies and transition metal doping

Mechanochemical synthesis of ultrafine Ce2S3 powder

International Nuclear Information System (INIS)

Tsuzuki, T.; McCormick, P.G.

1998-01-01

Full text: Rare earth sulphides have been receiving an increasing attraction for various applications including infrared window materials and magneto-optical devices. In particular, Ce 2 S 3 has been under intensive study for use as a red pigment to replace toxic cadmium sulfoselenide. The conventional method for synthesising Ce 2 S 3 is the sulphidization of the element or sesquioxide with hydrogen sulphide gas. However, the method usually requires a high-temperature process (>1000 deg C), and hence coarse particles larger than the optimal size of ∼ 2 S 3 powder by mechanochemical processing using X-ray diffraction spectroscopy, BET surface area analysis and transmission electron microscopy. Mechanical milling of the mixture of a cerium salt and an alkali/alkali-earth sulphide powders led to a solid state displacement reaction in a steady-state manner, forming Ce 2 S 3 nanoparticles in a salt by-product matrix. After a simple washing process to remove the salt by-product, ultrafine Ce 2 S 3 particles with sizes of 20 - 200 nm having an orthorhombic structure were obtained. Using a diluent and mechanically alloyed CaS nanoparticles in the starting powder, particles of only a cubic γ-Ce 2 S 3 phase with sizes of 10 - 80 nm were formed

Luminescence Properties of Ca19Ce(PO4)14:A (A = Eu3+/Tb3+/Mn2+) Phosphors with Abundant Colors: Abnormal Coexistence of Ce4+/3+-Eu3+ and Energy Transfer of Ce3+ → Tb3+/Mn2+ and Tb3+-Mn2.

Science.gov (United States)

Shang, Mengmeng; Liang, Sisi; Lian, Hongzhou; Lin, Jun

2017-06-05

A series of Eu 3+ /Tb 3+ /Mn 2+ -ion-doped Ca 19 Ce(PO 4 ) 14 (CCPO) phosphors have been prepared via the conventional high-temperature solid-state reaction process. Under UV radiation, the CCPO host presents a broad blue emission band from Ce 3+ ions, which are generated during the preparation process because of the formation of deficiency. The Eu 3+ -doped CCPO phosphors can exhibit magenta to red-orange emission as a result of the abnormal coexistence of Ce 3+ /Ce 4+ /Eu 3+ and the metal-metal charge-transfer (MMCT) effect between Ce 3+ and Eu 3+ . When Tb 3+ /Mn 2+ are doped into the hosts, the samples excited with 300 nm UV light present multicolor emissions due to energy transfer (ET) from the host (Ce 3+ ) to the activators with increasing activator concentrations. The emitting colors of CCPO:Tb 3+ phosphors can be tuned from blue to green, and the CCPO:Mn 2+ phosphors can emit red light. The ET mechanism from the host (Ce 3+ ) to Tb 3+ /Mn 2+ is demonstrated to be a dipole-quadrapole interaction for Ce 3+ → Tb 3+ and an exchange interaction for Ce 3+ → Mn 2+ in CCPO:Tb 3+ /Mn 2+ . Abundant emission colors containing white emission were obtained in the Tb 3+ - and Mn 2+ -codoped CCPO phosphors through control of the levels of doped Tb 3+ and Mn 2+ ions. The white-emitted CCPO:Tb 3+ /Mn 2+ phosphor exhibited excellent thermal stability. The photoluminescence properties have shown that these materials might have potential for UV-pumped white-light-emitting diodes.

CE microchips: an opened gate to food analysis.

Science.gov (United States)

Escarpa, Alberto; González, María Cristina; Crevillén, Agustín González; Blasco, Antonio Javier

2007-03-01

CE microchips are the first generation of micrototal analysis systems (-TAS) emerging in the miniaturization scene of food analysis. CE microchips for food analysis are fabricated in both glass and polymer materials, such as PDMS and poly(methyl methacrylate) (PMMA), and use simple layouts of simple and double T crosses. Nowadays, the detection route preferred is electrochemical in both, amperometry and conductivity modes, using end-channel and contactless configurations, respectively. Food applications using CE microchips are now emerging since food samples present complex matrices, the selectivity being a very important challenge because the total integration of analytical steps into microchip format is very difficult. As a consequence, the first contributions that have recently appeared in the relevant literature are based primarily on fast separations of analytes of high food significance. These protocols are combined with different strategies to achieve selectivity using a suitable nonextensive sample preparation and/or strategically choosing detection routes. Polyphenolic compounds, amino acids, preservatives, and organic and inorganic ions have been studied using CE microchips. Thus, new and exciting future expectations arise in the domain of food analysis. However, several drawbacks could easily be found and assumed within the miniaturization map.

32 CFR Appendix B to Part 247 - CE Publications

Science.gov (United States)

2010-07-01

... dining at a restaurant or attending a musical performance) of a commercial organization whose primary... potentially become the CE contractor. Upon evaluation of the competing proposals by the Source Selection Advisory Committee (SSAC) and selection of a winner by the selecting official, the CE contract shall be...

Diffusion of hydrogen in Pd-(Ce, Y, B) alloys

International Nuclear Information System (INIS)

Sakamoto, Y.; Kaneko, H.; Tsukahara, T.; Hirata, S.

1987-01-01

The study has been carried out to determine the diffusivity of hydrogen in Pd alloys containing Ce, Y and B in atom fractions up to θ/sub μ/ = 0.1 by an electrochemical permeation method, and to examine the lattice dilation effect on the diffusivity in these alloys. Ce and Y have been chosen because the solid solubility of both in Pd is about 13 at% in spite of the very large atomic size-factor difference between Pd and the solutes, and thus the expansion of the Pd lattice by Ce and Y is much larger than by Ag. Furthermore, it is of interest that the partial enthalpy of the dissolved hydrogen at infinite dilution ΔH 0 /sub H/ for Ce and Y is much smaller than for Pd. On the other hand, B atom also expands the Pd lattice in a way similar to Y, and sometimes B atoms may dissolve in the octahedral interstitial sites in the same way as hydrogen atoms

Preparation and characterization of Ce-doped ZnO nanofibers by an electrospinning method

Directory of Open Access Journals (Sweden)

Jong-Pil Kim

2011-02-01

Full Text Available ZnO and Ce-doped ZnO Nanofibers on (111 Pt/SiO2/Si substrates were produced using an electrospinning technique. The as-prepared composite fibres were subjected to high-temperature calcination to produce inorganic fibers. After calcining at a temperature of 500 °C, the average diameter of the ZnO and Ce-doped ZnO nanofibers were determined to be 170 nm and 225 nm, respectively. The average grain size of the ZnO and Ce-doped ZnO nanofibers were about 50 nm and 57 nm, respectively. The microstructure, chemical bonding state and photoluminescence of the produced ZnO and Ce-doped ZnO nanofibers were investigated. The Ce-doped ZnO nanofiber can be assigned to the presence of Ce ions on substitutional sites of Zn ions and the Ce3+ state from X-ray photoelectron spectra. Compared with PL spectra of ZnO nanofibers, the peak position of the UV emission of the Ce-doped ZnO nanofibers is sharply suppressed while the green emission band is highly enhanced.

Room-temperature synthesis and characterization of porous CeO{sub 2} thin films

Energy Technology Data Exchange (ETDEWEB)

Chu, Dewei; Masuda, Yoshitake; Ohji, Tatsuki; Kato, Kazumi [National Institute of Advanced Industrial Science and Technology (AIST), Anagahora, Shimoshidami, Moriyama-ku, Nagoya (Japan)

2012-01-15

CeO{sub 2} thin films with hexagonal-shaped pores were successfully prepared by a facile electrodeposition at room temperature combined with an etching process. By using electrodeposited ZnO nanorods as a soft template, the morphology, and microstructure of the CeO{sub 2} could be controlled. TEM observation indicated that as-prepared CeO{sub 2} film is composed of nanocrystals with average size of several nanometers, while XPS analysis showed the coexistence of Ce{sup 3+} and Ce{sup 4+} in the film. The photoluminescence properties of CeO{sub 2} films were measured, which showed much higher sensitivity compared to bare substrate. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Luminescence characteristics of Pb2+ centres in undoped and Ce3+-doped Lu3Al5O12 single-crystalline films and Pb2+→Ce3+ energy transfer processes

International Nuclear Information System (INIS)

Babin, V.; Gorbenko, V.; Makhov, A.; Mares, J.A.; Nikl, M.; Zazubovich, S.; Zorenko, Yu.

2007-01-01

At 4.2-350 K, the steady-state and time-resolved emission and excitation spectra and luminescence decay kinetics were studied under excitation in the 2.5-15 eV energy range for the undoped and Ce 3+ -doped Lu 3 Al 5 O 12 (LuAG) single-crystalline films grown by liquid phase epitaxy method from the PbO-based flux. The spectral bands arising from the single Pb 2+ -based centres were identified. The processes of energy transfer from the host lattice to Pb 2+ and Ce 3+ ions and from Pb 2+ to Ce 3+ ions were investigated. Competition between Pb 2+ and Ce 3+ ions in the processes of energy transfer from the LuAG crystal lattice was evidenced especially in the exciton absorption region. Due to overlap of the 3.61 eV emission band of Pb 2+ centres with the 3.6 eV absorption band of Ce 3+ centres, an effective nonradiative energy transfer from Pb 2+ ions to Ce 3+ ions takes place, resulting in the appearance of slower component in the luminescence decay kinetics of Ce 3+ centres and decrease of the Ce 3+ -related luminescence intensity

SP@CE - An SP-based programming model for consumer electronics streaming applications

NARCIS (Netherlands)

Varbanescu, Ana Lucia; Nijhuis, Maik; Escribano, Arturo González; Sips, Henk; Bos, Herbert; Bal, Henri

2007-01-01

Efficient programming of multimedia streaming applications for Consumer Electronics (CE) devices is not trivial. As a solution for this problem, we present SP@CE, a novel programming model designed to balance the specific requirements of CE streaming applications with the simplicity and efficiency

Application of CE-ICP-MS and CE-ESI-MS/MS for identification of Zn-binding ligands in Goji berries extracts.

Science.gov (United States)

Ruzik, Lena; Kwiatkowski, Piotr

2018-06-01

The identification of groups of ligands binding metals is a crucial issue for the better understanding of their bioaccessibility. In the current study, we have intended an approach for identification of Zn-binding ligands based on using capillary electrophoresis combined with inductively coupled plasma mass spectrometry (CE-ICP-MS) and tandem electrospray ionization mass spectrometry (CE-ESI-MS/MS). The approach, which featured the use of the coupling of capillary electrophoresis with inductively coupled plasma mass spectrometry allows to separate and observe zinc ions present in complexes with respect to their size and charge and to identify nine compounds with zinc isotopic profile. CE-ICP-MS provides us with information about presence of zinc species and elemental information about zinc distribution. CE-ESI-MS/MS provide us with information about the most favorable Zn binding ligands: amino acids, flavonols, stilbenoids, fenolic acids and carotenoids. The presented work is the continuation of previous studies based on using LC-ESI-MS/MS, though, now we presented a new solutions with the possibility of changing detectors without changing the separation techniques, what is important without re-optimizing the method. The new presented method allows to identify the zinc-binding ligands in shorter time. Copyright © 2018 Elsevier B.V. All rights reserved.

Scintillation properties of selected oxide monocrystals activated with Ce and Pr

Science.gov (United States)

Wojtowicz, Andrzej J.; Drozdowski, Winicjusz; Wisniewski, Dariusz; Lefaucheur, Jean-Luc; Galazka, Zbigniew; Gou, Zhenhui; Lukasiewicz, Tadeusz; Kisielewski, Jaroslaw

2006-01-01

In the last 10-15 years there has been a significant effort toward development of new, more efficient and faster materials for detection of ionizing radiation. A growing demand for better scintillator crystals for detection of 511 keV gamma particles has been due mostly to recent advances in modern imaging systems employing positron emitting radionuclides for medical diagnostics in neurology, oncology and cardiology. While older imaging systems were almost exclusively based on BGO and NaI:Tl crystals the new systems, e.g., ECAT Accel, developed by Siemens/CTI, are based on recently discovered and developed LSO (Lu 2SiO 5:Ce, Ce-activated lutetium oxyorthosilicate) crystals. Interestingly, despite very good properties of LSO, there still is a strong drive toward development of new scintillator crystals that would show even better performance and characteristics. In this presentation we shall review spectroscopic and scintillator characterization of new complex oxide crystals, namely LSO, LYSO, YAG, LuAP (LuAlO 3, lutetium aluminate perovskite) and LuYAP activated with Ce and Pr. The LSO:Ce crystals have been grown by CTI Inc (USA), LYSO:Ce, LuAP:Ce and LuYAP:Ce crystals have been grown by Photonic Materials Ltd., Scotland (PML is the only company providing large LuAP:Ce crystals on a commercial scale), while YAG:Pr and LuAP:Pr crystals have been grown by Institute of Electronic Materials Technology (Poland). All these crystals have been characterized at Institute of Physics, N. Copernicus University (Poland). We will review and compare results of measurements of radioluminescence, VUV spectroscopy, scintillation light yields, scintillation time profiles and low temperature thermoluminescence performed on these crystals. We will demonstrate that all experiments clearly indicate that there is a significant room for improvement of LuAP, LuYAP and YAG. While both Ce-activated LSO and LYSO perform very well, we also note that LuYAP:Ce, LuAP:Ce and YAG:Pr offer some

Optical properties of CeO 2 thin films

Indian Academy of Sciences (India)

Cerium oxide (CeO2) thin films have been prepared by electron beam evaporation technique onto glass substrate at a pressure of about 6 × 10-6 Torr. The thickness of CeO2 films ranges from 140–180 nm. The optical properties of cerium oxide films are studied in the wavelength range of 200–850 nm. The film is highly ...

Facile preparation of self-healing superhydrophobic CeO2 surface by electrochemical processes

Science.gov (United States)

Nakayama, Katsutoshi; Hiraga, Takuya; Zhu, Chunyu; Tsuji, Etsushi; Aoki, Yoshitaka; Habazaki, Hiroki

2017-11-01

Herein we report simple electrochemical processes to fabricate a self-healing superhydrophobic CeO2 coating on Type 304 stainless steel. The CeO2 surface anodically deposited on flat stainless steel surface is hydrophilic, although high temperature-sintered and sputter-deposited CeO2 surface was reported to be hydrophobic. The anodically deposited hydrophilic CeO2 surface is transformed to hydrophobic during air exposure. Specific accumulation of contaminant hydrocarbon on the CeO2 surface is responsible for the transformation to hydrophobic state. The deposition of CeO2 on hierarchically rough stainless steel surface produces superhydrophobic CeO2 surface, which also shows self-healing ability; the surface changes to superhydrophilic after oxygen plasma treatment but superhydrophobic state is recovered repeatedly by air exposure. This work provides a facile method for preparing a self-healing superhydrophobic surface using practical electrochemical processes.

The investigation of Ce doped ZnO crystal: The electronic, optical and magnetic properties

Science.gov (United States)

Wen, Jun-Qing; Zhang, Jian-Min; Qiu, Ze-Gang; Yang, Xu; Li, Zhi-Qin

2018-04-01

The electronic, optical and magnetic properties of Ce doped ZnO crystal have been studied by using first principles method. The research of formation energies show that Ce doped ZnO is energetically stable, and the formation energies reduce from 6.25% to 12.5% for Ce molar percentage. The energy band is still direct band gap after Ce doped, and band gap increases with the increase of Cesbnd Ce distance. The Fermi level moves upward into conduction band and the DOS moves to lower energy with the increase of Ce concentration, which showing the properties of n-type semiconductor. The calculated optical properties imply that Ce doped causes a red-shift of absorption peaks, and enhances the absorption of the visible light. The transition from ferromagnetic to antiferromagnetic has been found in Ce doped ZnO.

Building novel Ag/CeO2 heterostructure for enhancing photocatalytic activity

International Nuclear Information System (INIS)

Leng, Qiang; Yang, Dezhi; Yang, Qi; Hu, Chenguo; Kang, Yue; Wang, Mingjun; Hashim, Muhammad

2015-01-01

Highlights: • Ag nanoparticle is designed to building Schottky heterojunction on CeO 2 nanocube. • The photocatalytic activity of Ag/CeO 2 heterostructure is much enhanced. • 95.33% of MB can be effectively degraded within half an hour. • Ag as acceptor of photoelectrons blocks the recombination of electron–hole pairs. - Abstract: Stable and recyclable photocatalysts with high efficiency to degrade organic contamination are important and widely demanded under the threat of the environment pollution. Ag/CeO 2 heterostructure is designed as a photocatalyst to degrade organic dye under the simulated sunlight. The catalytic activity of CeO 2 nanocubes (NCs) to degrade methylene blue (MB) is obviously enhanced when Ag nanoparticles (NPs) are deposited on the surface of them. The weight ratio of Ag and CeO 2 in forming high efficiency catalyst, the amount of Ag/CeO 2 catalyst used in degradation process, and the dye concentration and pH value of the initial MB solution are examined systematically. 95.33% of MB can be effectively degraded within half an hour when 50 mg of Ag/CeO 2 catalyst in an optimal weight ratio of 1:3, is added to the 100 mL of MB solution (c 0 = 1 × 10 −5 mol L −1 , pH 6.2). The mechanism of the enhanced catalytic activity of Ag/CeO 2 heterostructure is discussed. The photocatalytic degradation rate is found to obey pseudo-first-order kinetics equations according to Langmuir–Hinshelwood model. The intermediate products in different stages during the degradation of MB are analyzed

Body mass index, weight change, and survival in non-Hodgkin lymphoma patients in Connecticut women.

Science.gov (United States)

Han, Xuesong; Stevens, June; Bradshaw, Patrick T

2013-01-01

Evidence is emerging that obesiy and weight gain may affect the prognosis of several types of cancer. We investigated the impact of body mass index (BMI) as well as pre-and postdiagnosis weight changes on non-Hodgkin lymphoma (NHL) prognosis. A cohort of 573 female incident NHL cases diagnosed during 1996-2000 in Connecticut was followed for a median of 7.8 yr. Self-reported height and weight at 3 time points before and after diagnosis were collected. Hazard ratios (HR) and 95% confidence intervals (CI) were estimated using proportional hazard models adjusting for factors believed to be associated with overall survival of NHL. Underweight (BMI treatment were found to have a poorer survival.

An Update on Improvements to NiCE Support for RELAP-7

Energy Technology Data Exchange (ETDEWEB)

McCaskey, Alex [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wojtowicz, Anna [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Deyton, Jordan H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Patterson, Taylor C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Billings, Jay Jay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-01-01

The Multiphysics Object-Oriented Simulation Environment (MOOSE) is a framework that facilitates the development of applications that rely on finite-element analysis to solve a coupled, nonlinear system of partial differential equations. RELAP-7 represents an update to the venerable RELAP-5 simulator that is built upon this framework and attempts to model the balance-of-plant concerns in a full nuclear plant. This report details the continued support and integration of RELAP-7 and the NEAMS Integrated Computational Environment (NiCE). RELAP-7 is fully supported by the NiCE due to on-going work to tightly integrate NiCE with the MOOSE framework, and subsequently the applications built upon it. NiCE development throughout the first quarter of FY15 has focused on improvements, bug fixes, and feature additions to existing MOOSE-based application support. Specifically, this report will focus on improvements to the NiCE MOOSE Model Builder, the MOOSE application job launcher, and the 3D Nuclear Plant Viewer. This report also includes a comprehensive tutorial that guides RELAP-7 users through the basic NiCE workflow: from input generation and 3D Plant modeling, to massively parallel job launch and post-simulation data visualization.

Isolation and functional characterization of CE1 binding proteins

Directory of Open Access Journals (Sweden)

Yu Ji-hyun

2010-12-01

Full Text Available Abstract Background Abscisic acid (ABA is a plant hormone that controls seed germination, protective responses to various abiotic stresses and seed maturation. The ABA-dependent processes entail changes in gene expression. Numerous genes are regulated by ABA, and promoter analyses of the genes revealed that cis-elements sharing the ACGTGGC consensus sequence are ubiquitous among ABA-regulated gene promoters. The importance of the core sequence, which is generally known as ABA response element (ABRE, has been demonstrated by various experiments, and its cognate transcription factors known as ABFs/AREBs have been identified. Although necessary, ABRE alone is not sufficient, and another cis-element known as "coupling element (CE" is required for full range ABA-regulation of gene expression. Several CEs are known. However, despite their importance, the cognate transcription factors mediating ABA response via CEs have not been reported to date. Here, we report the isolation of transcription factors that bind one of the coupling elements, CE1. Results To isolate CE1 binding proteins, we carried out yeast one-hybrid screens. Reporter genes containing a trimer of the CE1 element were prepared and introduced into a yeast strain. The yeast was transformed with library DNA that represents RNA isolated from ABA-treated Arabidopsis seedlings. From the screen of 3.6 million yeast transformants, we isolated 78 positive clones. Analysis of the clones revealed that a group of AP2/ERF domain proteins binds the CE1 element. We investigated their expression patterns and analyzed their overexpression lines to investigate the in vivo functions of the CE element binding factors (CEBFs. Here, we show that one of the CEBFs, AtERF13, confers ABA hypersensitivity in Arabidopsis, whereas two other CEBFs enhance sugar sensitivity. Conclusions Our results indicate that a group of AP2/ERF superfamily proteins interacts with CE1. Several CEBFs are known to mediate defense or

Isolation and functional characterization of CE1 binding proteins.

Science.gov (United States)

Lee, Sun-ji; Park, Ji Hye; Lee, Mi Hun; Yu, Ji-hyun; Kim, Soo Young

2010-12-16

Abscisic acid (ABA) is a plant hormone that controls seed germination, protective responses to various abiotic stresses and seed maturation. The ABA-dependent processes entail changes in gene expression. Numerous genes are regulated by ABA, and promoter analyses of the genes revealed that cis-elements sharing the ACGTGGC consensus sequence are ubiquitous among ABA-regulated gene promoters. The importance of the core sequence, which is generally known as ABA response element (ABRE), has been demonstrated by various experiments, and its cognate transcription factors known as ABFs/AREBs have been identified. Although necessary, ABRE alone is not sufficient, and another cis-element known as "coupling element (CE)" is required for full range ABA-regulation of gene expression. Several CEs are known. However, despite their importance, the cognate transcription factors mediating ABA response via CEs have not been reported to date. Here, we report the isolation of transcription factors that bind one of the coupling elements, CE1. To isolate CE1 binding proteins, we carried out yeast one-hybrid screens. Reporter genes containing a trimer of the CE1 element were prepared and introduced into a yeast strain. The yeast was transformed with library DNA that represents RNA isolated from ABA-treated Arabidopsis seedlings. From the screen of 3.6 million yeast transformants, we isolated 78 positive clones. Analysis of the clones revealed that a group of AP2/ERF domain proteins binds the CE1 element. We investigated their expression patterns and analyzed their overexpression lines to investigate the in vivo functions of the CE element binding factors (CEBFs). Here, we show that one of the CEBFs, AtERF13, confers ABA hypersensitivity in Arabidopsis, whereas two other CEBFs enhance sugar sensitivity. Our results indicate that a group of AP2/ERF superfamily proteins interacts with CE1. Several CEBFs are known to mediate defense or abiotic stress response, but the physiological functions

Cerium(IV) carboxymethylcellulose (CMC−Ce ) as an efficient and ...

Indian Academy of Sciences (India)

chemsci

nucleotides (Figure 1).1,2 Many pyridine derivatives po- ... neous catalyst, no attention so far has been paid to using ... Schematic illustration of the preparation and possible structure of CMC–CeIV. ... C to constant weight to provide the ..... Purposed mechanism for CMC−CeIVcatalyzed formation of 2,4,6-triarylpyridines.

Particle-specific toxicity and bioavailability of cerium oxide (CeO{sub 2}) nanoparticles to Arabidopsis thaliana

Energy Technology Data Exchange (ETDEWEB)

Yang, Xinping; Pan, Haopeng [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); Wang, Peng, E-mail: p.wang3@uq.edu.au [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); The University of Queensland, School of Agriculture and Food Sciences, St. Lucia, Queensland 4072 (Australia); Zhao, Fang-Jie [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); Rothamsted Research, Harpenden, Hertfordshire AL5 2JQ (United Kingdom)

2017-01-15

Highlights: • The phytotoxicity and uptake of CeO{sub 2} NPs were examined in Arabidopsis. • CeO{sub 2} NPs stimulated plant growth at low doses but were toxic at high doses. • The toxicity was due to the NPs per se, rather than from the dissolved Ce ions. • A similar up-translocation factor was found for CeO{sub 2} NPs, bulk CeO{sub 2} and Ce ions. - Abstract: The use of manufactured cerium oxide nanoparticles (CeO{sub 2}-NPs) in consumer products has increased markedly over the past decade, and their release into natural ecosystems is unavoidable. This study investigated the phytotoxicity and uptake of CeO{sub 2}-NPs in Arabidopsis thaliana grown in an agar medium. Although low concentrations of CeO{sub 2}-NPs had stimulatory effects on plant growth, at higher concentrations, CeO{sub 2}-NPs reduced growth and had adverse effects on the antioxidant systems and photosystem. Importantly, the toxicity resulted from the nanoparticles per se, rather than from the dissolved Ce ions. CeO{sub 2}-NPs were taken up and subsequently translocated to shoot tissues, and transmission electron microscopy (TEM) showed the presence of a large number of needle-like particle aggregations in the intercellular regions and the cytoplasm of leaf cells. The up-translocation factor to shoots was independent of the concentrations of Ce in the roots and the supplied forms of Ce (i.e. CeO{sub 2}-NPs, CeO{sub 2}-bulk, and ionic Ce), suggesting that endocytosis is likely to be a general mechanism responsible for the translocation of these Ce compounds. These findings provide important information regarding the toxicity and uptake of CeO{sub 2}-NPs in plants, which needs to be considered in environmental risk assessment for the safe use and disposal of CeO{sub 2}-NPs.

A comparative study of LaBr{sub 3}(Ce{sup 3+}) and CeBr{sub 3} based gamma-ray spectrometers for planetary remote sensing applications

Energy Technology Data Exchange (ETDEWEB)

Kozyrev, A., E-mail: kozyrev@mx.iki.rssi.ru; Mitrofanov, I.; Bakhtin, B.; Fedosov, F.; Golovin, D.; Litvak, M.; Malakhov, A.; Mokrousov, M.; Nuzhdin, I.; Sanin, A.; Tretyakov, V.; Vostrukhin, A. [Space Research Institute of the Russian Academy of Sciences (IKI), 84/32 Profsoyuznaya St., Moscow 117997 (Russian Federation); Owens, A.; Benkhoff, J. [European Space Agency, ESTEC, Keplerlaan, 2200 AG Noordwijk (Netherlands); Quarati, F. [AP, RST, FAME, Delft University of Technology, Mekelweg 15, 2629 JB Delft (Netherlands); Gonitec BV, J. Bildersstraat 60, 2596 EJ Den Haag (Netherlands); Timoshenko, G.; Shvetsov, V. [Joint Institute for Nuclear Research, Joliot-Curie 6, Dubna, Moscow Region 141980 (Russian Federation); Granja, C.; Slavicek, T.; Pospisil, S. [Institute of Experimental and Applied Physics, Czech Technical University in Prague, Horska 3a/22, 12800 Prague 2 (Czech Republic)

2016-08-15

The recent availability of large volume cerium bromide crystals raises the possibility of substantially improving gamma-ray spectrometer limiting flux sensitivities over current systems based on the lanthanum tri-halides, e.g., lanthanum bromide and lanthanum chloride, especially for remote sensing, low-level counting applications or any type of measurement characterized by poor signal to noise ratios. The Russian Space Research Institute has developed and manufactured a highly sensitive gamma-ray spectrometer for remote sensing observations of the planet Mercury from the Mercury Polar Orbiter (MPO), which forms part of ESA’s BepiColombo mission. The Flight Model (FM) gamma-ray spectrometer is based on a 3-in. single crystal of LaBr{sub 3}(Ce{sup 3+}) produced in a separate crystal development programme specifically for this mission. During the spectrometers development, manufacturing, and qualification phases, large crystals of CeBr{sub 3} became available in a subsequent phase of the same crystal development programme. Consequently, the Flight Spare Model (FSM) gamma-ray spectrometer was retrofitted with a 3-in. CeBr{sub 3} crystal and qualified for space. Except for the crystals, the two systems are essentially identical. In this paper, we report on a comparative assessment of the two systems, in terms of their respective spectral properties, as well as their suitability for use in planetary mission with respect to radiation tolerance and their propensity for activation. We also contrast their performance with a Ge detector representative of that flown on MESSENGER and show that: (a) both LaBr{sub 3}(Ce{sup 3+}) and CeBr{sub 3} provide superior detection systems over HPGe in the context of minimally resourced spacecraft and (b) CeBr{sub 3} is a more attractive system than LaBr{sub 3}(Ce{sup 3+}) in terms of sensitivities at lower gamma fluxes. Based on the tests, the FM has now been replaced by the FSM on the BepiColombo spacecraft. Thus, CeBr{sub 3} now forms

Radiation streaming with SAM-CE

International Nuclear Information System (INIS)

De Gangi, N.; Cohen, M.O.; Waluschka, E.; Steinberg, H.A.

1980-01-01

The SAM-CE Monte Carlo code has been employed to calculate doses, due to neutron streaming, on the operating floor and other locations of the Millstone Unit II Nuclear Power Facility. Calculated results were compared against measured doses

Familism and Social Inclusion: Hispanics in New London, Connecticut

Directory of Open Access Journals (Sweden)

Maria Amparo Cruz-Saco

2013-11-01

Full Text Available This paper analyzes the financial support and inclusiveness within Hispanic families in New London, Connecticut, and the causes of their social exclusion in the larger society. We designed and administered a survey of 114 items that was answered by 148 participants representing 1.3% of the non-Puerto Rican Hispanic population. Using factor analysis, we reduced a large number of items in two familism scores to four latent factors: "Financial Support for Family", "Obligation to Family", "Plan to Return", and "Filial Responsibility". We found that financial support for family and obligation to family are strongly endorsed by participants. Approximately one-half would return back to their home countries where they believe to be happier. One-fifth rejects this option. Three-quarters of participants remit money to family, parents in particular, who reside in countries of origin. In contrast to other studies, remitting money is not affected by any given personal characteristic such as gender, income or level of education. Similarly, participants remit irrespective of their degree of self-reported familism measured by scores on the latent factors. A large incidence of poverty among this population, lack of English proficiency, low skills, immigration status, and a lack of voice and political representation inhibit their social inclusion.

Toxicity of 144Ce inhaled in a relatively insoluble form by beagle dogs

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The metabolism, dosimetry and effects of 144 Ce inhaled in fused aluminosilicate particles are being investigated in the beagle dog to assess the long-term biological consequences of release of relatively insoluble aerosol forms of 144 Ce that could occur in nuclear accidents. The effects resulting from the relatively protracted radiation dose patterns to the lung from this form of 144 Ce are being compared with effects of other radiation dose patterns to the lung. One hundred eleven dogs were exposed to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 0.0024 to 210 μCi/kg body weight and 15 control dogs were exposed to nonradioactive fused aluminosilicate particles. To date, 65 144 Ce-exposed and 2 control dogs have died or were euthanized at 143 to 4578 days after inhalation of 144 Ce. Prominent findings in the 144 Ce-exposed dogs were radiation pneumonitis in 17 dogs that died at early times and neoplastic disease in 39 of the 48 dogs that died 750 days or later. Observations are continuing on the 46 144 Ce-exposed and 13 control dogs remaining alive at this time, at least 3337 days after exposure

Stabilization of temperature during magnetic hyperthermia by Ce substituted magnetite nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Shaw, S.K.; Alla, S.K. [Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India); Meena, S.S. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Mandal, R.K. [Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India); Prasad, N.K., E-mail: nandkp.met@iitbhu.ac.in [Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India)

2017-07-15

Highlights: • Ce{sub x}Fe{sub 3−x}O{sub 4} (0.01 ≤ x ≤ 0.5) nanoparticles below 15 nm were synthesized by microwave refluxing method. • The saturation magnetization decreased with increased Ce concentration. • The sample displayed stabilization of temperature near 42 °C during magnetic hyperthermia. - Abstract: We report here magnetic hyperthermia using nanoparticles of Ce{sub x}Fe{sub 3−x}O{sub 4} (x = 0.01, 0.05, 0.1, 0.3 and 0.5) during which temperature was found to be stabilizing near 42 °C. This happens despite of their high saturation magnetization (M{sub S}) and Curie temperature (T{sub C}) values. It was observed that by selecting an appropriate magnetic field the temperature can be rose exactly near the therapeutic temperature and thus it will help to selectively kill the cancerous cells leaving normal cells unaffected. These nanoparticles (size around 8–15 nm) were produced by single step microwave refluxing technique. X-ray diffraction (XRD) analysis demonstrates that samples were essentially single phase except for x = 0.5 sample. The X-ray photoelectron spectroscopy (XPS) study for the samples demonstrated that Ce was present in both Ce{sup 3+} and Ce{sup 4+} states. The saturation magnetization value of the samples decreased sharply from 62 Am{sup 2}/kg for x = 0.01 to 19 Am{sup 2}/kg for x = 0.1. This value further decreased with increased Ce doping.

Incommensurate and commensurate magnetic structures of the ternary germanide CeNiGe3

International Nuclear Information System (INIS)

Durivault, L; Bouree, F; Chevalier, B; Andre, G; Weill, F; Etourneau, J; Martinez-Samper, P; Rodrigo, J G; Suderow, H; Vieira, S

2003-01-01

The structural properties of CeNiGe 3 have been investigated via electron diffraction and neutron powder diffraction (NPD). This ternary germanide crystallizes in the orthorhombic SmNiGe 3 -type structure (Cmmm space group). Electrical resistivity, ac- and dc-magnetization measurements show that CeNiGe 3 orders antiferromagnetically below T N = 5.5(2) K and exclude the occurrence at low temperatures of a spin-glass state for CeNiGe 3 as previously reported. Specific heat measurements and NPD both reveal two magnetic transitions, observed at T N1 = 5.9(2) K and T N2 = 5.0(2) K. Between T N1 and T N2 , the Ce magnetic moments in CeNiGe 3 are ordered in a collinear antiferromagnetic structure associated with the k 1 = (100) wavevector and showing a relationship with the magnetic structure of the Ce 3 Ni 2 Ge 7 ternary germanide. Below T N2 , this k 1 = (100) commensurate magnetic structure coexists with an incommensurate helicoidal magnetic structure associated with k 2 = (00.409(1)1/2). This last magnetic structure is highly preponderant below T N2 (93(5)% in volume). At 1.5 K, the Ce atoms in CeNiGe 3 carry a reduced ordered magnetic moment (0.8(2) μ B ). This value, smaller than that obtained in Ce 3 Ni 2 Ge 7 , results from an important hybridization of the 4f(Ce) orbitals with those of the Ni and Ge ligands

Decays of 143La and 145Ce using KUR-ISOL

International Nuclear Information System (INIS)

Ukon, Hiroe; Shibata, Michihiro; Kawade, Kiyoshi; Yamamoto, Hiroshi; Katoh, Toshiro; Kawase, Yoichi; Okano, Kotoyuki; Ruan, J.Z.

1987-01-01

Accurate measurements of beta- and gamma-rays resulting from the decay of 143 La and 145 Ce are made with KUR-ISOL to develop their decay diagram. First, gamma-singles spectrometry is performed to determine the energy and intensity of gamma-rays resulting from the decay of 143 La and 145 Ce. About 30 and 7 peaks are newly identified for 143 La and 145 Ce, respectively, in their gamma-ray spectra. Another gamma-singles spectrometry is carried out using 60 cm 3 Ge(Li) and LEPS detectors to determine 620 keV gamma-ray emission rate in the decay of 143 La. The emission rate is calculated at 4.23 and 4.62 percent from measurements made with Ge(Li) and LEPS, respectively. Gamma-gamma coincidence spectrometry is performed using a 60 cm 3 Ge(Li)-142 cm 3 Ge(Li) or a 60 cm 3 Ge(Li)-LEPS detector. LEPS is then applied to beta-singles spectrometry to determine the maximum energy of the gamma-rays from 143 La and 145 Ce within an error of about 20 keV. The beta-ray end point is determined from the measurements. Decay diagrams of 143 La and 145 Ce are constructed based on these results. The intensity and multipolarity of 18.9, 23.4 and 42.3 keV gamma-rays in the decay of 143 La are determined. Energy and intensity of gamma-rays of 2.8 MeV or above are also determined for 143 La. Three low energy levels of 145 Ce is examined in comparison to the decay diagram of 143 La. 143 Ce is found to have an energy level structure similar to that of other nuclides of N = 85. (Nogami, K.)

Mesoporous CeTiSiMCM-48 as novel photocatalyst for degradation of organic compounds

International Nuclear Information System (INIS)

Mureseanu, Mihaela; Parvulescu, Viorica; Radu, Teodora; Filip, Mihaela; Carja, Gabriela

2015-01-01

This work presents novel photocatalysts containing Ti and/or Ce embedded in the mesoporous silica framework (TiSiMCM-48, CeSiMCM-48 and CeTiSiMCM-48) that were prepared via a facile sol–gel process in the presence of ionic structure directing agents. The structural properties of the obtained materials were analyzed by X-ray diffraction (XRD), nitrogen adsorption-desorption, scanning and transmission electron microscopy (SEM, TEM), EDAX analysis, X-ray photoelectron microscopy (XPS), ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS) and Fourier transformation infrared spectroscopy (FT-IR). The results indicated that Ce and Ti were highly dispersed or incorporated into the framework of the cubic SiMCM-48, with an enhanced light-trapping effect both in the UV and Vis regions. When applied to the photocatalytic degradation of phenol, the best results were obtained for the bimetallic hybrid. The best activity of CeTiSiMCM-48 photocatalyst was ascribed to improved electron–hole pair separation efficiency and formation of more reactive oxygen species due to the presence of Ce 4+ /Ce 3+ . The mesoporous support increases the dispersability of the photoactive Ti 4+ or Ce 4+ /Ce 3+ species on the catalyst surface and the accessibility of the substrate to the active sites. Furthermore, the catalysts can be easily recovered and reused for four cycles without significant loss of activity. - Highlights: • Novel photocatalysts containing Ti and/or Ce embedded in the mesoporous MCM-48 silica. • Ce 4+ /Ce 3+ improved electron–hole pair separation and reactivity of oxygen species. • The mesoporous support increases the dispersability of the photoactive species. • The photocatalyst was highly active and stable for phenol degradation under UV irradiation. • TiCeSiMCM-48 can be recycled up to four cycles without significant loss of activity

Exposure of agricultural crops to nanoparticle CeO2 in biochar-amended soil.

Science.gov (United States)

Servin, Alia D; De la Torre-Roche, Roberto; Castillo-Michel, Hiram; Pagano, Luca; Hawthorne, Joseph; Musante, Craig; Pignatello, Joseph; Uchimiya, Minori; White, Jason C

2017-01-01

Biochar is seeing increased usage as an amendment in agricultural soils but the significance of nanoscale interactions between this additive and engineered nanoparticles (ENP) remains unknown. Corn, lettuce, soybean and zucchini were grown for 28 d in two different soils (agricultural, residential) amended with 0-2000 mg engineered nanoparticle (ENP) CeO 2  kg -1 and biochar (350 °C or 600 °C) at application rates of 0-5% (w/w). At harvest, plants were analyzed for biomass, Ce content, chlorophyll and lipid peroxidation. Biomass from the four species grown in residential soil varied with species and biochar type. However, biomass in the agricultural soil amended with biochar 600 °C was largely unaffected. Biochar co-exposure had minimal impact on Ce accumulation, with reduced or increased Ce content occurring at the highest (5%) biochar level. Soil-specific and biochar-specific effects on Ce accumulation were observed in the four species. For example, zucchini grown in agricultural soil with 2000 mg CeO 2  kg -1 and 350 °C biochar (0.5-5%) accumulated greater Ce than the control. However, for the 600 °C biochar, the opposite effect was evident, with decreased Ce content as biochar increased. A principal component analysis showed that biochar type accounted for 56-99% of the variance in chlorophyll and lipid peroxidation across the plants. SEM and μ-XRF showed Ce association with specific biochar and soil components, while μ-XANES analysis confirmed that after 28 d in soil, the Ce remained largely as CeO 2 . The current study demonstrates that biochar synthesis conditions significantly impact interactions with ENP, with subsequent effects on particle fate and effects. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Dosimeter properties of Ce and Eu doped LiCaAlF6

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Watanabe, Kenichi; Fukuda, Kentaro

2014-01-01

Optical, scintillation properties, optical stimulated luminescence, and thermally stimulated luminescence of Ce 1, 3, and 5% doped and Eu 1, 1.5, and 2% doped LiCaAlF 6 crystals fabricated by Tokuyama Corp. were investigated. In transmittance, absorption was proportional to dopant concentrations and typical optical quantum yield of Ce and Eu-doped LiCaAlF 6 were 40 and 100%, respectively. Scintillation wavelength and decay time profiles were investigated under X-ray irradiation. Ce 3+ and Eu 2+ 5d-4f luminescence appeared around 300 nm and 370 nm with typical decay time of 40 ns and 1.5 μs, respectively. Optically stimulated luminescence of Ce-doped ones appeared under 405 nm stimulation with detectable intensity while those of Eu doped ones were quite weak. Thermally stimulated luminescence of Ce- and Eu-doped LiCaAlF 6 were enough strong and they exhibited good response function from 1 to 1000 mGy exposure. - Highlights: • Optical, scintillation, OSL, and TSL properties of Ce or Eu differently doped LiCaAlF6 were studied. • PL quantum yield of Ce and Eu doped LiCaAlF6 showed 40% and 100%, respectively. • OSL was observed in Ce-doped LiCaAlF6. • TSL was observed in both material systems and exhibited a good dose response from 1 to 1000 mGy

Estimation of human gonadal Pu and Ce concentrations from animal data

International Nuclear Information System (INIS)

Thomas, R.G.; Durbin, P.W.; McInroy, J.F.; Healy, J.W.

1989-01-01

Data were obtained from the literature for gonad and body weights and for the Pu or Ce content of the gonads and body at death for several laboratory animal species, five human Pu injection cases, and 731 human adults exposed environmentally to Pu in fallout. Data for Pu concentration in gonads, liver, and bone samples of 59 male and five female occupational Pu cases (including four completely analyzed whole bodies) were obtained from the U.S. Transuranium Registry. A logarithmic function was used to relate fractional Pu or Ce concentration in testes and ovaries to body weight of the animals and to predict fractional Pu or Ce concentrations in human gonads, [Pu]G . PuB-1 = aBWb, where [Pu]G or [Ce]G is the nuclide concentration in gonads (Bq g-1 of wet weight), PuB or CeB is the nuclide content of the body at death, and BW is body weight (kg). The fractional Pu and Ce concentrations in both the testes and ovaries are inverse and nearly linear functions of body weight. The regression lines of fractional Pu or Ce concentration in testes and ovaries have similar slopes (b = -1.07 +/- 0.14); however, the nuclide concentrations (coefficient a) in ovaries are six times greater than in testes. Extrapolation of the animal data yielded fractional Pu concentrations in human testes and ovaries that agree with those calculated for the occupational cases and those recommended by the International Commission on Radiological Protection. The good agreement between the fractional concentrations of Pu and Ce in the testes and in the ovaries suggests that these data can be substituted in metabolic models of chemically similar elements for which gonadal data are scarce

New limits on 2ε, εβ{sup +} and 2β{sup +} decay of {sup 136}Ce and {sup 138}Ce with deeply purified cerium sample

Energy Technology Data Exchange (ETDEWEB)

Belli, P.; Bernabei, R. [INFN Sezione Roma ' ' Tor Vergata' ' , Rome (Italy); Universita di Roma ' ' Tor Vergata' ' , Dipartimento di Fisica, Rome (Italy); Boiko, R.S. [Institute for Nuclear Research, Kyiv (Ukraine); National University of Life and Environmental Sciences of Ukraine, Kyiv (Ukraine); Cappella, F. [INFN Sezione Roma, Rome (Italy); Cerulli, R.; Laubenstein, M. [INFN, Laboratori Nazionali del Gran Sasso, Assergi (Italy); Danevich, F.A.; Kropivyansky, B.N.; Polischuk, O.G.; Tretyak, V.I. [Institute for Nuclear Research, Kyiv (Ukraine); Incicchitti, A. [INFN Sezione Roma, Rome (Italy); Universita di Roma ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); Mokina, V.M. [Institute for Nuclear Research, Kyiv (Ukraine); INFN Sezione Roma, Rome (Italy)

2017-08-15

A search for double electron capture (2ε), electron capture with positron emission (εβ{sup +}), and double positron emission (2β{sup +}) in {sup 136}Ce and {sup 138}Ce was realized with a 465 cm{sup 3} ultra-low background HP Ge γ spectrometer over 2299 h at the Gran Sasso underground laboratory. A 627 g sample of cerium oxide deeply purified by liquid-liquid extraction method was used as a source of γ quanta expected in double β decay of the cerium isotopes. New improved half-life limits were set on different modes and channels of double β decay of {sup 136}Ce and {sup 138}Ce at the level of T{sub 1/2} > 10{sup 17}-10{sup 18} yr. (orig.)

Specific heat measurements of CePt{sub 3}Si and Ce{sub 1+x}Pt{sub 3+y}Si{sub 1+z}

Energy Technology Data Exchange (ETDEWEB)

Motoyama, G. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan)]. E-mail: motoyama@sci.u-hyogo.ac.jp; Watanabe, M. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan); Maeda, K. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan); Oda, Y. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan); Ueda, K. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan); Kohara, T. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan)

2007-03-15

We have measured the specific heat of a series of polycrystalline CePt{sub 3}Si and Ce{sub 1+x}Pt{sub 3+y}Si{sub 1+z} samples whose compositions vary slightly from the stoichiometric composition. We observed two peaks derived from magnetic anomalies on the specific heat measurements of the Ce{sub 1+x}Pt{sub 3+y}Si{sub 1+z} samples. One of the peaks relates to the antiferromagnetic phase transition at T{sub N}=2.2K. The other is a large peak at 2.7K observed for the sample that showed a ferromagnetic anomaly at 3.0K on the temperature dependence of the magnetization. Heat treatment had different effects between these anomalies.

Database Description - tRNADB-CE | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data List Contact us tRNAD...B-CE Database Description General information of database Database name tRNADB-CE Alter...CC BY-SA Detail Background and funding Name: MEXT Integrated Database Project Reference(s) Article title: tRNAD... 2009 Jan;37(Database issue):D163-8. External Links: Article title: tRNADB-CE 2011: tRNA gene database curat...n Download License Update History of This Database Site Policy | Contact Us Database Description - tRNADB-CE | LSDB Archive ...

Scintillation properties of Ce-doped LuLiF{sub 4} and LuScBO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Yanagida, Takayuki, E-mail: t_yanagi@tagen.tohoku.ac.jp [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan); Fujimoto, Yutaka [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan); Kawaguchi, Noriaki [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan); Tokuyama Corporation, Shibuya 3-chome, Shibuya-ku, Tokyo 150-8383 (Japan); Yokota, Yuui [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan); Kamada, Kei [Materials Research Laboratory, Furukawa, Co. Ltd., 1-25-13 Kannondai, Tsukuba, Ibaragi 305-0856 (Japan); Totsuka, Daisuke [Nihon Kessho Kogaku Co., Ltd., 810-5 Nobe-cho, Tatebayashi, Gunma 374-0047 (Japan); Hatamoto, Shun-Ichi [Corporate Research and Development Center, Mitsui Mining and Smelting Co., Ltd., 1333-2 Haraichi, Ageo Saitama 362-0023 (Japan); Yoshikawa, Akira; Chani, Valery [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan)

2011-10-01

The crystals of 1 mol% Ce-doped LuLiF{sub 4} (Ce:LLF) grown by the micro-pulling down ({mu}-PD) method and 1 mol% Ce-doped LuScBO{sub 3} (Ce:LSBO) grown by the conventional Czochralski (Cz) method were examined for their scintillation properties. Ce:LLF and Ce:LSBO demonstrated {approx}80% transparency at wavelengths longer than 300 and 400 nm, respectively. When excited by {sup 241}Am {alpha}-ray to obtain radioactive luminescence spectra, Ce{sup 3+} 5d-4f emission peaks were detected at around 320 nm for Ce:LLF and at around 380 nm for Ce:LSBO. In Ce:LSBO, the host luminescence was also observed at 260 nm. By recording pulse height spectra under {gamma}-ray irradiation, the absolute light yield of Ce:LLF and Ce:LSBO was measured to be 3600{+-}400 and 4200{+-}400 ph/MeV, respectively. Decay time kinetics was also investigated using a pulse X-ray equipped streak camera system. The main component of Ce:LLF was {approx}320 ns and that of Ce:LSBO was {approx}31 ns. In addition, the light yield non-proportionality and energy resolution against the {gamma}-ray energy were evaluated.

Heat capacity measurement of CeNbO4(s)

International Nuclear Information System (INIS)

Bhojane, S.M.; Kulkarni, Jayanthi; Kulkarni, S.G.

2012-01-01

Molar heat capacity of CeNbO 4 (s) was determined using differential scanning calorimeter in the temperature range of 550 to 900 K. The molar heat capacity values were least squares analysed and the dependence of molar heat capacity with temperature for CeNbO 4 (s) can be given as, J K -1 mol -1 = 94.7320 + 0.0852T-1.6073 x 10 6 T -2 (550≤T(K)≤900) Cerium is commonly used as an inactive analogue to plutonium; also it is an important fission product with moderate yield. Various Nb alloys are used as cladding material in nuclear industry. Hosts of thermodynamic data are needed to understand the various phenomena that occur in a nuclear reactor. In the present study, the molar heat capacity of CeNbO 4 (s) has been determined using high temperature differential scanning calorimeter in temperature range 550 to 900 K. This is one of the important compounds in the ternary system of Ce-Nb-O

Speciation of the oxidation states of plutonium in aqueous solutions by UV/Vis spectroscopy, CE-ICP-MS and CE-RIMS

International Nuclear Information System (INIS)

Buerger, S.; Banik, N.L.; Buda, R.A.; Kratz, J.V.; Kuczewski, B.; Trautmann, N.

2007-01-01

For the speciation of the plutonium oxidation states in aqueous solutions, the online coupling of capillary electrophoresis (CE) with inductively coupled plasma mass spectrometry (ICP-MS) has been developed. Depending on the radius/electrical charge ratio, the oxidation states III, IV, V, and VI of plutonium are separated by CE, based on the different migration times through the capillary and are detected by ICP-MS. The detection limit is 20 ppb, i.e. 10 9 -10 10 atoms (10 -12 -10 -13 g) for one oxidation state with an uncertainty of the reproducibility of the migration times of ≤ 1% and ≤ 5% for the peak area. The redox kinetics of the different plutonium oxidation states in the presence of humic substances (humic and fulvic acid) have been studied. A relatively rapid reduction of Pu(VI) (10 to 1000 h) in contact with Gorleben fulvic or Aldrich humic acid could be observed, depending on the pH of the solution. Furthermore, at pH=1, a reduction to Pu(III) and Pu(IV) in a mixture of all four oxidation states in contact with Gorleben fulvic acid after one month has been observed. In order to improve the sensitivity of the CE method, the offline coupling of CE to resonance ionization mass spectrometry (RIMS) has been explored. First applications of this new speciation method are presented. (orig.)

Breakup ice control structure for the Salmon River in Connecticut

International Nuclear Information System (INIS)

Tuthill, A.M.; White, K.D.

1997-01-01

The Salmon River ice jam problem was investigated and a conceptual design for a breakup ice control structure was developed. Historical ice jam events were reviewed and an ice observation program was conducted during the winter of 1994-95. The factors affecting ice jam frequency and severity were examined. The factors included daily temperature, rainfall quantity and intensity, Salmon River stage and discharge, and Connecticut River tide levels. First, a numerical model was developed to simulate a worst case scenario for ice jams, followed by a conceptual design for a concrete pier ice control structure under two ice breakup scenarios. The first scenario assumed that a semi-intact ice sheet would rest against the piers and retain a floating equilibrium jam upstream, allowing water discharge to pass beneath. The second scenario was based on the assumption that a grounded ice jam in direct contact with the piers would divert water flow around the structure via an armored channel in the overbank area. An ice retention structure consisting of a row of concrete piers, spaced across the main channel, 60 m upstream of an existing dam, was proposed. 11 refs., 6 figs

Magnetic susceptibility of LaxCe1-xF3 single crystals

International Nuclear Information System (INIS)

Paradowski, M.L.; Pacyna, A.W.; Bombik, A.; Korczak, W.; Korczak, S.Z.

2000-01-01

The magnetic susceptibility of La x Ce 1-x F 3 single crystals, for 0 eff and paramagnetic Curie temperature θ p have been obtained, using the Curie-Weiss law in the temperature range 100-300 K. The interconfiguration excited energy E ex , the spin-fluctuation temperature T sf , and the g-values, corresponding to three Kramers doublets in the 2 F 5/2 ground multiplet of Ce 3+ ion in La x Ce 1-x F 3 have been determined, using quantum theory of paramagnetic susceptibility. The mixed-valent and crystal field effects influence significantly the g-values. The effect of the dilution of the paramagnetic Ce 3+ ions with diamagnetic La 3+ ions is also discussed

Preparation of Mn doped CeO_2 nanoparticles with enhanced ferromagnetism

International Nuclear Information System (INIS)

Ravi, S.; Winfred Shashikanth, F.

2017-01-01

Spherical-like CeO_2 and Mn-doped CeO_2 using 6-aminohexanoic acid as surfactant exhibit enhanced ferromagnetism. The optical absorption spectra reveal a red shift with a band gap of 2.51 eV. The mechanics of ferromagnetism and the red shift were analyzed. These results provide a promising platform for developing a dilute magnetic semiconductor in spintronics. - Highlights: • Pure and Mn-doped CeO_2 is prepared with aminohexanoic acid as capping. • They exhibit wide optical absorption with red-shift in their band gap. • Mn-doped CeO_2 nanoparticle exhibit hysteresis at room temperature. • Results were promising to use in spintronics and opto-electronics field.

Investigation of the 600 C isothermal section of the Fe-Al-Ce ternary system

Energy Technology Data Exchange (ETDEWEB)

Zheng, Huiyun; Yin, Fucheng [Xiangtan Univ., Hunan (China). School of Materials Science and Engineering; Xiangtan Univ., Hunan (China). Key Laboratory of Materials Design and Preparation Technology of Hunan Province; Li, Zhi [Xiangtan Univ., Hunan (China). School of Materials Science and Engineering; Xiangtan Univ., Hunan (China). Key Laboratory of Materials Design and Preparation Technology of Hunan Province; Xiangtan Univ., Hunan (China). Key Laboratory of Key Film Materials and Application for Equipment (Hunan province); Ji, Li [South China University of Technology, Guangdong (China). School of Materials Science and Engineering

2017-01-15

The isothermal section of the Fe-Al-Ce system at 600 C was determined by means of scanning electron microscopy coupled with energy dispersive spectroscopy and X-ray powder diffraction. Twenty three-phase regions were confirmed experimentally, and two three-phase regions could be deduced in this section. Five ternary compounds, i. e., τ{sub 1}, τ{sub 2}, τ{sub 3}, τ{sub 5}, and τ{sub 6}, exist at 600 C. The Fe{sub 2}Ce phase contains 6.6 at.% Al in the Fe-Al-Ce system. The Fe solubility in α-Al, αAl{sub 11}Ce{sub 3}, αAl{sub 3}Ce, Al{sub 2}Ce, AlCe, and AlCe{sub 3} is approximately 1.7 at.%, 1.1 at.%, 1.2 at.%, 1.3 at.%, 5.8 at.%, and 0.1 at.%, respectively, and the solubility of Ce in α-Al, FeAl{sub 3}, Fe{sub 2}Al{sub 5}, FeAl{sub 2}, and FeAl is approximately 0.1 at.%, 1.2 at.%, 1.9 at.%, 0.9 at.%, and 3.7 at.%, respectively.

Community Energy Systems and the Law of Public Utilities. Volume Nine. Connecticut

Energy Technology Data Exchange (ETDEWEB)

Feurer, D A; Weaver, C L

1981-01-01

A detailed description of the laws and programs of the State of Connecticut governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Evidence of complex magnetism in CePt3C

International Nuclear Information System (INIS)

Vejpravova, J.; Prokleska, J.; Danis, S.; Uhlirova, K.; Sechovsky, V.

2006-01-01

CePt 3 C has been synthesized and studied by powder X-ray diffraction (at RT), specific heat, resistivity and magnetization measurements at temperatures from RT down to 0.4K and in magnetic fields up to 10T. A possible scenario for the ground state of CePt 3 C based on the observed phenomena is proposed

Effects of Ce3+ concentration, beam voltage and current on the cathodoluminescence intensity of SiO2: Pr3+–Ce3+ nanophosphor

CSIR Research Space (South Africa)

Mhlongo, GH

2011-02-01

Full Text Available SiO2:Pr3+–Ce3+ phosphor powders were successfully prepared using a sol–gel process. The concentration of Pr3+ was fixed at 0.2 mol% while that of Ce3+ was varied in the range of 0.2–2 mol%. High resolution transmission electron microscopy (HRTEM...

Structure and photocatalytic activity studies of TiO2-supported over Ce-modified Al-MCM-41

International Nuclear Information System (INIS)

Krishna Reddy, Jakkidi; Durgakumari, Valluri; Subrahmanyam, Machiraju; Sreedhar, Bojja

2009-01-01

Ce-Al-MCM-41, TiO 2 /Al-MCM-41 and TiO 2 /Ce-Al-MCM-41 materials with varying contents of Ce (by impregnation) and TiO 2 loaded (by solid-state dispersion) on Al-MCM-41 support are prepared. The Ce modified and TiO 2 loaded composite systems are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectra (DRS) and X-ray photoelectron spectroscopy (XPS) techniques. The DRS and XPS of low Ce content (0.2-0.5 wt.%) modified Al-MCM-41 samples are showing more characteristic of Ce 3+ species wherein cerium in interaction with Al-MCM-41 and that of high Ce (0.8, 3.0 wt.%) content modified samples are showing the characteristic of both Ce 4+ and Ce 3+ species. A series of Ce-modified Al-MCM-41 and TiO 2 loaded composite catalysts are evaluated for photocatalytic degradation of phenol under UV irradiation. Low Ce content in Ce 3+ state on Al-MCM-41 is showing good photoactivity in comparison with high Ce content samples and pure ceria. The composite TiO 2 /Ce-Al-MCM-41 is showing enhanced degradation activity due decreased rate of electron-hole recombination on TiO 2 surface by the redox properties of cerium. The photocatalyst TiO 2 /Ce-Al-MCM-41 with an optimum of 10 wt.% TiO 2 and 0.3 wt.% Ce is showing maximum phenol degradation activity. The possible mechanism of phenol degradation on the composite photocatalyst is proposed.

Phase Composition and Long-Term Conductivity of Acceptor Doped Ce(PO₃)₄ and CeP₂O₇ with Variable P/Metal Ratio and of CeP₂O₇-KH₂PO₄ Composite

DEFF Research Database (Denmark)

Chatzichristodoulou, Christodoulos; Hallinder, Jonathan; Lapina, Alberto

2013-01-01

The thermal evolution of the phase composition of CeP2O7 and Ce(PO3)4 with 10 mol% Y and Gd doping, respectively, was examined by in-situ powder X-ray diffraction and thermogravimetry with in-line mass spectroscopy. The phase composition depends critically on the P to metal ratio, the annealing...... temperature, humidity and time. CeP2O7 and Ce(PO3)4 were completely decomposed to CePO4 following a 1100 h long conductivity test at 155°C. The conductivity of 10 mol% Gd doped Ce(PO3)4 (synthesized with P:(Ce + Gd) = 5.0) reaches a value of 6.4·10−2 S·cm−1 at 150°C under wet conditions (pH2O = 0.2 atm...

Solid-state reaction synthesis and aqueous durability of Ce-doped zirconolite-rich ceramics

Energy Technology Data Exchange (ETDEWEB)

Wen, Guanjun [State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010 (China); Zhang, Kuibao, E-mail: xiaobao320@163.com [State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010 (China); Yin, Dan [State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010 (China); Zhang, Haibin, E-mail: hbzhang@imr.ac.cn [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

2015-11-15

In this study, Ce-doped zirconolite-rich ceramics were prepared by solid-state reaction process using cerium as the surrogate of tetravalence actinide nuclide. The occupancy of Ce in the waste forms was investigated. The aqueous durability of Ce-doped zirconolite-rich ceramic was examined as well. The results show that zirconolite and pseudobrookite coexisted after being sintered at 1200 °C for 6 h. Meanwhile, perovskite is inevitable generated during the process. CeO{sub 2} can be successfully incorporated into the lattice structure of the zirconolite-rich ceramics. The maximum containing capacity of CeO{sub 2} is up to 14.95 wt% or y = 0.4. The normalized elemental leaching rates of Ce and Ca are fairly constant in low values of 1.2 × 10{sup −6} and 2.3 × 10{sup −2} g m{sup −2} d{sup −1} after 28 days. The normalized leaching rate of Fe is also in a low value of 2.9 × 10{sup −4} g m{sup −2} d{sup −1} after 7 days. - Highlights: • Ce-doped zirconolite-rich ceramic was produced at 1200 °C. • Pseudobrookite-type Fe{sub 2}TiO{sub 5} was employed to incorporate Fe element. • Ce{sup 3+} and Ce{sup 4+} coexisted in the Ce-doped zirconolite-rich waste form after being sintered at 1200 °C for 6 h. • The leaching rate of Ca was relatively higher than that of borosilicate glasses.

Structure and scintillation yield of Ce-doped Al–Ga substituted yttrium garnet

International Nuclear Information System (INIS)

Sidletskiy, Oleg; Kononets, Valerii; Lebbou, Kheirreddine; Neicheva, Svetlana; Voloshina, Olesya; Bondar, Valerii; Baumer, Vyacheslav; Belikov, Konstantin; Gektin, Alexander; Grinyov, Boris; Joubert, Marie-France

2012-01-01

Highlights: ► Range of Y 3 (Al 1−x Ga x ) 5 O 12 :Ce solid solution crystals are grown from melt by the Czochralski method. ► Light yield of mixed crystals reaches 130% of the YAG:Ce value at x ∼ 0.4. ► ∼1% of antisite defects is formed in YGG:Ce, but no evidence of this is obtained for the rest of crystals. -- Abstract: Structure and scintillation yield of Y 3 (Al 1−x Ga x ) 5 O 12 :Ce solid solution crystals are studied. Crystals are grown from melt by the Czochralski method. Distribution of host cations in crystal lattice is determined. Quantity of antisite defects in crystals is evaluated using XRD and atomic emission spectroscopy data. Trend of light output at Al/Ga substitution in Y 3 (Al 1−x Ga x ) 5 O 12 :Ce is determined for the first time. Light output in mixed crystals reaches 130% comparative to Ce-doped yttrium–aluminum garnet. Luminescence properties at Al/Ga substitution are evaluated.

Effect of Ce on performance and physicochemical properties of Pt-containing automotive emission control catalysts

International Nuclear Information System (INIS)

Nunan, J.G.; Silver, R.G.; Bradley, S.A.

1992-01-01

Present-day automotive emission control catalysts contain noble metals such as Pt, Pd and Rh all on an alumina support with a variety of promoters. Ce is one of the most important promoters. In this paper, the interaction between Pt and Ce is studied using TPR and STEM on a variety of catalysts. The degree of Pt/Ce interaction is increased by decreasing CeO 2 crystallite size, and to a lesser extent by increasing CeO 2 loading. Direct Pt/Ce interaction leads to a synergistic reduction of both Pt and surface Ce. This reduction qualitatively correlates with catalyst performance after activation in a reducing gas. It is proposed that this synergistic reduction of Pt and Ce is associated with observed improvements in catalyst performance using a non-oscillating exhaust gas

Light emission efficiency and imaging properties of YAP:Ce granular phosphor screens

International Nuclear Information System (INIS)

Kalivas, N.; Valais, I.; Nikolopoulos, D.; Konstantinidis, A.; Cavouras, D.; Kandarakis, I.; Gaitanis, A.; Nomicos, C.D.; Panayiotakis, G.

2007-01-01

Phosphor materials are used in medical imaging combined with radiographic film or other photodetectors. Cerium (Ce 3+ ) -doped scintillators are of particular interest for medical imaging, because of their very fast response. YAP:Ce scintillator-based image detectors have already been evaluated in single-crystal form and under conditions of positron emission tomography and synchrotron or γ-ray irradiation. Furthermore, YAP:Ce phosphor has been evaluated in conjunction with radiographic films. The present work reports experimental and theoretical data concerning the light output absolute luminescence efficiency (AE) of the YAP:Ce screens under irradiation conditions employed in medical X-ray projection imaging (i.e., in diagnostic radiology). projection imaging (i.e., in diagnostic radiology). YAP:Ce phosphor screens with surface densities ranging between 53 and 110 mg/cm 2 were prepared by sedimentation on fused silica substrates in our laboratory. The resulted surface density of the screens was determined by dividing the phosphor mass deposited on the screen surface with the area of the surface. Additionally this work addresses the imaging performance of YAP:Ce by estimation of the detective quantum efficiency (DQE), i.e., the square of the signal to noise ratio transfer. Absolute efficiency was found to decrease with X-ray tube voltage for for YAP:Ce phosphor. The highest experimental efficiency was obtained for the 53.7 mg/cm 2 and 88.0 mg/cm 2 YAP:Ce screens. The highest DQE value was found for the 88.0 mg/cm 2 screen irradiated at 60 kVp. (orig.)

Magnetic properties of nearly stoichiometric CeAuBi2 heavy fermion compound

International Nuclear Information System (INIS)

Adriano, C.; Jesus, C. B. R.; Pagliuso, P. G.; Rosa, P. F. S.; Grant, T.; Fisk, Z.; Garcia, D. J.

2015-01-01

Motivated by the interesting magnetic anisotropy found in the heavy fermion family CeTX 2 (T = transition metal and X = pnictogen), here, we study the novel parent compound CeAu 1−x Bi 2−y by combining magnetization, pressure dependent electrical resistivity, and heat-capacity measurements. The magnetic properties of our nearly stoichiometric single crystal sample of CeAu 1−x Bi 2−y (x = 0.92 and y = 1.6) revealed an antiferromagnetic ordering at T N  = 12 K with an easy axis along the c-direction. The field dependent magnetization data at low temperatures reveal the existence of a spin-flop transition when the field is applied along the c-axis (H c  ∼ 7.5 T and T = 5 K). The heat capacity and pressure dependent resistivity data suggest that CeAu 0.92 Bi 1.6 exhibits a weak heavy fermion behavior with strongly localized Ce 3+ 4f electrons. Furthermore, the systematic analysis using a mean field model including anisotropic nearest-neighbors interactions and the tetragonal crystalline electric field (CEF) Hamiltonian allows us to extract a CEF scheme and two different values for the anisotropic J RKKY exchange parameters between the Ce 3+ ions in this compound. Thus, we discuss a scenario, considering both the anisotropic magnetic interactions and the tetragonal CEF effects, in the CeAu 1−x Bi 2−y compounds, and we compare our results with the isostructural compound CeCuBi 2

Chemiluminescence of the Ce{sup 3+}* ions, and the {sup 1}ГђЕѕ{sub 2} and ({sup 1}ГђЕѕ{sub 2}){sub 2} molecular species of oxygen induced by active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals at reduction of Ce{sup 4+} to Ce{sup 3+} by water in heterogeneous system «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O»

Energy Technology Data Exchange (ETDEWEB)

Bulgakov, Ramil G., E-mail: profbulgakov@yandex.ru [Laboratory of Negative Ions Mass Spectrometry, Institute of Molecule and Crystal Physics, Ufa Research Centre of the Russian Academy of Sciences, 71, Oktyabrya Prosp., 450054 Ufa (Russian Federation); Gazeeva, Dilara R., E-mail: galimovdi@mail.ru [Laboratory of High Energy Chemistry and Catalysis, Institute of Petrochemistry and Catalysis Russian Academy of Sciences, 141 Prosp. Oktyabrya, 450075 Ufa (Russian Federation); Galimov, Dim I. [Laboratory of High Energy Chemistry and Catalysis, Institute of Petrochemistry and Catalysis Russian Academy of Sciences, 141 Prosp. Oktyabrya, 450075 Ufa (Russian Federation)

2017-03-15

We have discovered an unusual new chemiluminescence (CL) in the title system, which is different from other known CL by unusual combination of various in nature emitters, namely, electronically excited state of the Ce{sup 3+}* ion (λ{sub max}=335 nm), singlet oxygen {sup 1}ГђЕѕ{sub 2} (emission near 1270 nm) and its dimer ({sup 1}ГђЕѕ{sub 2}){sub 2} (λ{sub max}=490, 645, 715 nm). The Ce{sup 3+}* ions and oxygen emitters {sup 1}O{sub 2} and ({sup 1}O{sub 2}){sub 2} are generated in the reaction of Ce{sup 4+} with water and hydrogen peroxide, respectively. CL is generated only in a heterogeneous system «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O» and completely absent in a homogeneous solution (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} in water containing benzene. This is due to the fact that the redox processes and CL in the «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O» system are induced by active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals. It is through the action of the active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals is carried out population of such a high energy level of 5d{sup 1} excited state of Ce{sup 3+}* ion (λ{sub max}=353 nm, 3.7 eV). Discovered CL is the first example of an experimental registration of the Ce{sup 3+}* ion emission in a chemical reaction, because formation of Ce{sup 3+}* ion previously assumed to be in a great many works on the study of CL in reactions of Ce{sup 4+} compounds with various reducing agents, including the reaction with water, initiated by light or catalysts. Possible mechanism generation of new CL in the system under study has been proposed in the paper. - Highlights: • A new chemiluminescence (CL) in the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 2}-C{sub 6}H{sub 6}-H{sub 2}O system was discovered. • The emission of the Ce{sup 3+}* ion as a CL emitter has been registered for the first time. • Other emitters of this CL are

Siderophore-mediated oxidation of Ce and fractionation of HREE by Mn (hydr)oxide-coprecipitation and sorption on MnO2: Experimental evidence for negative Ce-anomalies in abiogenic manganese precipitates

Science.gov (United States)

Krämer, Dennis; Tepe, Nathalie; Bau, Michael

2014-05-01

We conducted experiments with Rare Earths and Yttrium (REY), where the REY were sorbed on synthetic manganese dioxide as well as on coprecipitating manganese (hydr)oxide in the presence and absence of the siderophore desferrioxamine-B (DFOB). Siderophores are a group of globally abundant biogenic complexing agents which are excreted by plants and bacteria to enhance the bioavailability of Fe in oxic environments. The model siderophore used in this study, DFOB, is a hydroxamate siderophore occurring in almost all environmental settings with concentrations in the nanomolar to millimolar range and is one of the most thoroughly studied siderophores. In the absence of siderophores and other organic ligands, trivalent Ce is usually surface-oxidized to tetravalent Ce during sorption onto manganese (hydr)oxides. Such Mn precipitates, therefore, often show positive Ce anomalies, whereas the ambient solutions exhibit negative Ce anomalies (Ohta and Kawabe, 2001). In marked contrast, however, REY sorption in the presence of DFOB produces negative Ce anomalies in the Mn precipitates and a distinct and characteristic positive Ce anomaly in the residual siderophore-bearing solution. Furthermore, the heavy REY with ionic radii larger than the radius of Sm are also almost completely prevented from sorption onto the Mn solid phases. Sorption of REY onto Mn (hydr)oxides in the presence of DFOB creates a distinct and pronounced fractionation of Ce and the heavy REY from the light and middle REY. Apart from Ce, which is oxidized in solution by the siderophore, the distribution of the other REY mimics the stability constants for multi-dentate complexes of REY with DFOB, as determined by Christenson & Schijf (2011). Heavier REY are forming stronger complexes (and are hence better "protected" from sorption) than light REY, excluding Ce. Preferential partitioning of Ce into the liquid phase during the precipitation of Mn (hydr)oxides has only rarely been described for natural Mn (hydr

Magnetic Phase Transitions of CeSb. I

DEFF Research Database (Denmark)

Fischer, Pernille Hertz; Lebech, Bente; Meier, G.

1978-01-01

The magnetic ordering of the anomalous antiferromagnet CeSb, which has a NaCl crystal structure, was determined in zero applied magnetic field by means of neutron diffraction investigations of single crystals and powder. Below the Neel temperature TN of (16.1+or-0.1)K, there exist six partially...... a first-order phase transition at TN. At approximately TN/2 there is a first-order phase transition to a FCC type IA low-temperature configuration. The unusual magnetic properties of CeSb, which result from anisotropic exchange and crystalline electric field effects, resemble those of certain actinide Na...

On the mechanism of nanoparticulate CeO{sub 2} toxicity to freshwater algae

Energy Technology Data Exchange (ETDEWEB)

Angel, Brad M., E-mail: Brad.Angel@csiro.au [Centre for Environmental Contaminants Research, CSIRO Land and Water Flagship, Locked Bag 2007, Kirrawee, NSW 2232 (Australia); Vallotton, Pascal [Digital Productivity Flagship, CSIRO, North Ryde, NSW 1670 (Australia); Apte, Simon C. [Centre for Environmental Contaminants Research, CSIRO Land and Water Flagship, Locked Bag 2007, Kirrawee, NSW 2232 (Australia)

2015-11-15

Highlights: • Nanoparticulate CeO{sub 2} less toxic than micron-sized CeO{sub 2}. • UV light filters prevented ROS generation by CeO{sub 2}. • ROS not toxic mechanism: CeO{sub 2} toxicity was similar in presence and absence of ROS. • Strong sorption of nanoparticulate CeO{sub 2} to Pseudokirchneriella subcapitata in synthetic fresh water. • CeO{sub 2} sorption to cells was prevented and toxicity mitigated in the presence of DOC. - Abstract: The factors affecting the chronic (72-h) toxicity of three nanoparticulate (10–34 nm) and one micron-sized form of CeO{sub 2} to the green alga, Pseudokirchneriella subcapitata were investigated. To characterise transformations in solution, hydrodynamic diameters (HDD) were measured by dynamic light scatter, zeta potential values by electrophoretic mobility, and dissolution by equilibrium dialysis. The protective effects of humic and fulvic dissolved organic carbon (DOC) on toxicity were also assessed. To investigate the mechanisms of algal toxicity, the CytoViva hyperspectral imaging system was used to visualise algal–CeO{sub 2} interactions in the presence and absence of DOC, and the role of reactive oxygen species (ROS) was investigated by ‘switching off’ ROS production using UV-filtered lighting conditions. The nanoparticulate CeO{sub 2} immediately aggregated in solution to HDDs measured in the range 113–193 nm, whereas the HDD and zeta potential values were significantly lower in the presence of DOC. Negligible CeO{sub 2} dissolution over the time course of the bioassay ruled out potential toxicity from dissolved cerium. The nanoparticulate CeO{sub 2} concentration that caused 50% inhibition of algal growth rate (IC50) was in the range 7.6–28 mg/L compared with 59 mg/L for micron-sized ceria, indicating that smaller particles were more toxic. The presence of DOC mitigated toxicity, with IC50s increasing to greater than 100 mg/L. Significant ROS were generated in the nanoparticulate CeO{sub 2

Electronic structure of heavy fermion system CePt2In7 from angle-resolved photoemission spectroscopy

International Nuclear Information System (INIS)

Shen Bing; Yu Li; Lyu Shou-Peng; Jia Xiao-Wen; Zhang Yan; Wang Chen-Lu; Hu Cheng; Ding Ying; Sun Xuan; Hu Yong; Liu Jing; Gao Qiang; Zhao Lin; Liu Guo-Dong; Liu Kai; Lu Zhong-Yi; Bauer, E D; Thompson, J D; Xu Zu-Yan; Chen Chuang-Tian

2017-01-01

We have carried out high-resolution angle-resolved photoemission measurements on the Ce-based heavy fermion compound CePt 2 In 7 that exhibits stronger two-dimensional character than the prototypical heavy fermion system CeCoIn 5 . Multiple Fermi surface sheets and a complex band structure are clearly resolved. We have also performed detailed band structure calculations on CePt 2 In 7 . The good agreement found between our measurements and the calculations suggests that the band renormalization effect is rather weak in CePt 2 In 7 . A comparison of the common features of the electronic structure of CePt 2 In 7 and CeCoIn 5 indicates that CeCoIn 5 shows a much stronger band renormalization effect than CePt 2 In 7 . These results provide new information for understanding the heavy fermion behaviors and unconventional superconductivity in Ce-based heavy fermion systems. (paper)

Scintillation characteristics of LiPO3:Ce3+ glass scintillators

International Nuclear Information System (INIS)

Shin, S. W.; Hwang, J. H.

2003-01-01

LiPO 3 :Ce 3+ glass scintillators doped with 0.5, 0.75, 1.0, 1.25 and 1.5wt% cerium as an activator were fabricated. For the best transparency of the LiPO 3 glasses, optimum heating conditions were investigated. Optimum heating temperature and time is 950 .deg. C and 90 min with 1wt% sugar add as reductant. The lattice structure of LiPO 3 :Ce 3+ glass scintillator was monoclinic, its lattice constants(a 0 , b 0 , c 0 ) being 16,490λ, 5.427λ and 13.120λ. Photo-refraction index of LiPO 3 :Ce 3 + measured by SE(Spectroscopic ellipsometry) was 1.45 ∼ 1.5 and its bandgap energy was 2.342 eV. The absorption spectral range of LiPO 3 :Ce 3+ measured by UV-VIS spectrophotometry was 350∼ 375nm and the spectral ranges of photoluminescence(PL) were 400∼450nm and 750∼900nm, its maximum PL intensity appeared at 417nm and 791nm. LiPO 3 :Ce 3 + glass scintillator doped with 0.75wt% cerium showed the best PL intensity. The PL intensity increased until cerium content reaches 0.75wt% above which ir decreased

Integrated chemical process for exothermic wave synthesis of high luminance YAG:Ce phosphors

International Nuclear Information System (INIS)

Won, C.W.; Nersisyan, H.H.; Won, H.I.; Youn, J.W.

2011-01-01

In this paper, high-luminance yellow-emitting Y 3 Al 5 O 12 :Ce 3+ phosphor (YAG:Ce) microparticles were prepared in a solid flame using a 1.425Y 2 O 3 +2.5Al 2 O 3 +0.15CeO 2 +k(KClO 3 +urea)+mNH 4 F precursor mixture (here k is the number of moles of the KClO 3 +urea red-ox mixture, and m is the number of moles of NH 4 F). The self-sustaining combustion process for the entire reaction sample was provided by the heat generated from the KClO 3 +urea mixture. Parametric studies demonstrated that the maximum temperature in the combustion wave varied from 885 to 1200 deg. C for k=2.0-3.0 mole and m=0-1.5 mole. X-ray analysis results showed that the product obtained in the solid flame consisted of Y 3 Al 5 O 12 :Ce 3+ and KCl phases. Therefore, after dissolving potassium chloride in distillated water, pure-phase YAG:Ce phosphor powder was obtained. The as-prepared YAG:Ce phosphor particles had diameters of 10-25 μm and good dispersity and exhibited luminescence properties comparable to those of YAG:Ce phosphor powders prepared by conventional high-temperature processing. - Highlights: → A new solid-flame strategy was developed for synthesizing high-luminance YAG:Ce phosphor. → Adding KClO 3 +CO(NH 2 ) 2 +NH 4 F mixture to oxide powders provides a low-temperature combustion process. → YAG:Ce phosphor particles 10-25 μm in diameter were obtained at 1000-1100 deg. C within tens of seconds. → As-prepared YAG:Ce emission intensity was 90.1-103.2% compared to that of the reference sample.

Electron paramagnetic resonance study of Ce doped partially stabilized ZrO2 crystals

Directory of Open Access Journals (Sweden)

Mikhail А. Borik

2017-09-01

Full Text Available ZrO2 (PSZ solid solutions crystals stabilized with yttrium and cerium oxides have been studied using electron paramagnetic resonance (EPR in the X and Q ranges. Zr3+ have been observed centers in the as-annealed ZrO2 crystals stabilized only by yttrium oxide (2.8 mol% Y2O3. Another type of paramagnetic-O-centers appear as a result of CeO2 addition to ZrO2 crystals along with yttrium oxide. To estimate the concentration of Ce3+ ions in PZS crystals, we recorded the EPR spectra in the presence of a reference at 7 K. Paramagnetic Ce3+ ions have been identified and their relative amount in the PSZ crystals before and after high-temperature heat treatment has been assessed. Annealing in air leads decreases the concentration of Ce3+ ions for all the test compositions and changes the color of the crystals from red to white. After annealing of the sample 2.0Y0.8Ce3Zr, the amount of paramagnetic Ce3+ ions decreased approximately twofold. Paramagnetic centers from Ce3+ have not been detected in the specimen with a low cerium content of 0.1 mol% after annealing which indicates the complete transition of Ce3+ to the Ce4+ state. We show that the forming cerium paramagnetic centers are bound by strong exchange interactions. No angular dependence of the EPR lines of the paramagnetic Ce3+ cations on the applied external magnetic field has been observed. Probable origin of the absence of angular dependence is that the impurity rare-earth ions are located close to one another, forming impurity clusters with an effective spin of Seff=1/2.

Scientific Objectives of China Chang E 4 CE-4 Lunar Far-side Exploration Mission

Science.gov (United States)

Zhang, Hongbo; Zeng, Xingguo; Chen, Wangli

2017-10-01

China has achieved great success in the recently CE-1~CE-3 lunar missions, and in the year of 2018, China Lunar Exploration Program (CLEP) is going to launch the CE-4 mission. CE-4 satellite is the backup satellite of CE-3, so that it also consists of a Lander and a Rover. However, CE-4 is the first mission designed to detect the far side of the Moon in human lunar exploration history. So the biggest difference between CE-4 and CE-3 is that it will be equipped with a relay satellite in Earth-Moon-L2 Point for Earth-Moon Communication. And the scientific payloads carried on the Lander and Rover will also be different. It has been announced by the Chinese government that CE-4 mission will be equipped with some new international cooperated scientific payloads, such as the Low Frequency Radio Detector from Holland, Lunar Neutron and Radiation Dose Detector from Germany, Neutral Atom Detector from Sweden, and Lunar Miniature Optical Imaging Sounder from Saudi Arabia. The main scientific objective of CE-4 is to provide scientific data for lunar far side research, including: 1)general spatial environmental study of lunar far side；2)general research on the surface, shallow layer and deep layer of lunar far side；3)detection of low frequency radio on lunar far side using Low Frequency Radio Detector, which would be the first time of using such frequency band in lunar exploration history .

Enhancement of room temperature ferromagnetic behavior of rf sputtered Ni-CeO_2 thin films

International Nuclear Information System (INIS)

Murugan, R.; Vijayaprasath, G.; Mahalingam, T.; Ravi, G.

2016-01-01

Highlights: • Ni-CeO_2 thin films deposited by using rf Magnetron sputtering with different concentrations of Ni. • Deposited thin films have single crystalline and uniform surface morphology. • Photoluminescence and micro-Raman spectra were interpreted for Ni-CeO_2 thin films. • XPS spectra confirmed Ni ions were present in the doped CeO_2 thin films. • Ni ions induced ferromagnetic behavior of Ni-CeO_2 films were confirmed through VSM. - Abstract: Ni-doped CeO_2 thin films were prepared under Ar"+ atmosphere on glass substrates using rf magnetron sputtering. To assess the properties of the prepared thin films, the influence of various amounts of Ni dopant on structural, morphological, optical, vibrational, compositional and magnetic properties of the CeO_2 films were studied by using X-Ray diffraction (XRD), atomic force microscope (AFM), photoluminescence (PL), micro-Raman, X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM). XRD patterns for all the samples revealed the expected CeO_2 cubic fluorite-type structure and Ni ions were uniformly distributed in the samples. AFM images of the prepared samples indicate high dense, columnar structure with uniform distribution of CeO_2. Room-temperature photoluminescence (PL) and micro-Raman spectroscopic studies revealed an increase of oxygen vacancies with higher concentration of Ni in CeO_2. XPS results confirm the presence of Ni_2_p, O_1_s and Ce and depict that cerium is present as both Ce"4"+ and Ce"3"+ oxidation states in Ce_1_−_xNi_xO_2 (x = 15%) thin film. Field dependent magnetization measurements revealed a paramagnetic behavior for pure CeO_2, while a ferromagnetic behavior appeared when Ni is doped in CeO_2 films. Doping dependent magnetization measurements suggest that the observed ferromagnetism is due to the presence of metallic Ni clusters with nanometric size and broad size distribution.

Photoluminescent properties of Sr2CeO4: Eu3+ and Sr2CeO4: Eu2+ phosphors suitable for near ultraviolet excitation

International Nuclear Information System (INIS)

Suresh, K.; Poornachandra Rao, N.V.; Murthy, K.V.R.

2014-01-01

Powder phosphors of 1 mol% Eu 3+ - and Eu 2+ -doped strontium cerium oxide (Sr 2 CeO 4 ) were synthesized by standard solid-state reaction method. Eu 3+ - and Eu 2+ -doped Sr 2 CeO 4 phosphors fired at 1100 ℃ for 2 h were analysed by X-ray diffraction (XRD) and photoluminescence (PL) techniques. The XRD patterns confirm that the obtained phosphors are a single phase of Sr 2 CeO 4 composed of orthorhombic structure. Room temperature PL excitation spectrum of air-heated Sr 2 CeO 4 : Eu phosphor has exhibited bands at 260, 280 and 350 nm. Whereas the excitation spectrum of Sr 2 CeO 4 : Eu phosphor heated under reducing (carbon) atmosphere exhibited single broadband range from 260 to 390 nm. The (PL) emission peaks of both the phosphors at 467 (blue), 537 (green) and 616 nm (red) generate white light under 260, 280 and 350 nm excitation wavelengths. The Commission International de l'Eclairage (CIE) colour coordinates conforms that these phosphors emitting white light. The results reveal that these phosphors are multifunctional phosphors which emit white light under these excitations that they could be used as white components for display and lamp devices and as well as possible good light-conversion phosphor LEDs under near-ultraviolet (nUV) chip. (author)

Luminescence properties of Ce3+ doped gadolinium-calcium-silicaborate glass scintillator

International Nuclear Information System (INIS)

Park, J.M.; Ha, D.H.; Kaewjeang, S.; Maghanemi, U.; Kothan, S.; Kaewkhao, J.; Kim, H.J.

2016-01-01

In this work, the Ce 3+ doped gadolinium-calcium-silicaborate glass scintillators of the composition ratio 25Gd 2 O 3 :10CaO:10SiO 2 :(55−x)B 2 O 3 :xCeF 3 , have been fabricated by using the melt-quenching technique. The doping concentration of the Ce 3+ was varied from 0.05 mol% to 2.5 mol%. The 4f-5d transition of the Ce 3+ allowed scintillation with a fast decay time. The absorption spectrum, X-ray induced emission spectrum, photo luminescence spectrum, laser luminescence spectrum and decay time of the scintillators were measured for studying the luminescence properties. From the X-ray induced emission spectrum result, we checked the trend between doping concentration and light yield. The laser induced luminescence spectrum was measured while changing the temperature from 300 K to 10 K. We also measured the decay time by using the laser excitation of the 0.15 mol% Ce 3+ doped glass scintillator. - Highlights: • Ce 3+ doped gadolinium-calcium-silicaborate glass scintillators were developed. • Glass is easily fabricated with large sizes and various doping materials. • The luminescence properties are studied by using various radiation sources. • The light yield and decay time were measured at low temperature. • One decay time component is found.

Tunable emission in Ln3+ (Ce3+/Dy3+, Ce3+/Tb3+) doped KNa3Al4Si4O16 phosphor synthesized by combustion method

Science.gov (United States)

Kolte, M. M.; Pawade, V. B.; Bhattacharya, A. B.; Dhoble, S. J.

2018-05-01

Ln3+ (Ln = Ce3+/Dy3+, Ce3+/Tb3+) doped KNa3Al4Si4O16 phosphor has been synthesized by Combustion method (CS) at 550° C successfully. Ln3+ (Ln = Ce3+, Dy3+, Tb3+) ions when doped in KNa3Al4Si4O16 host lattice, it shows blue and green emission band under the near Ultraviolet (NUV) excitation wavelength. The Photoluminescence excitation (PLE) and emission spectra are observed due to f-f and d-f transition of rare earth ions. Also, an effective energy transfer (ET) study from Ce3+ → Dy3+ and Ce3+ → Tb3+ ions has been studied and confirmed on the basis of Dexter-Foster theory. Further synthesized phosphor is well characterized by XRD, SEM, TEM and decay time measurement. However, the analysis of crystallite size, lattice strain has been studied by using theoretical as well as experimental techniques. Hence, the observed tunable emission in Ln3+ doped KNa3Al4Si4O16 phosphor may be applicable for solid state lighting technology.

CE of phytosiderophores and related metal species in plants.

Science.gov (United States)

Xuan, Yue; Scheuermann, Enrico B; Meda, Anderson R; Jacob, Peter; von Wirén, Nicolaus; Weber, Günther

2007-10-01

Phytosiderophores (PS) and the closely related substance nicotianamine (NA) are key substances in metal uptake into graminaceous plants. Here, the CE separation of these substances and related metal species is demonstrated. In particular, the three PS 2'-deoxymugineic acid (DMA), mugineic acid (MA), and 3-epi-hydroxymugineic acid (epi-HMA), and NA, are separated using MES/Tris buffer at pH 7.3. Moreover, three Fe(III) species of the different PS are separated without any stability problems, which are often present in chromatographic analyses. Also divalent metal species of Cu, Ni, and Zn with the ligands DMA and NA are separated with the same method. By using a special, zwitterionic CE capillary, even the separation of two isomeric Fe(III) chelates with the ligand ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid (EDDHA) is possible (i.e., meso-Fe(III)-EDDHA and rac-Fe(III)-EDDHA), and for fast separations of NA and respective divalent and trivalent metal species, a polymer CE microchip with suppressed EOF is described. The proposed CE method is applicable to real plant samples, and enables to detect changes of metal species (Cu-DMA, Ni-NA), which are directly correlated to biological processes.

Magnetic domains and frustration in metallic CePdAl

Energy Technology Data Exchange (ETDEWEB)

Lucas, Stefan; Huesges, Zita; Huang, Chien-Lung; Stockert, Oliver [Max Planck Institute CPfS, Dresden (Germany); Fritsch, Veronika; Sakai, Akito [EP 6, Electronic Correlations and Magnetism, University of Augsburg (Germany); Grube, Kai; Taubenheim, Christian; Loehneysen, Hilbert von [Karlsruhe Institute of Technology (Germany)

2016-07-01

Magnetic frustration is an exciting topic in condensed matter physics, since it can lead to new ground states of materials, e.g. a spin liquid or spin glass state. Effects of magnetic frustration have been investigated intensively for insulating materials. However, the existence of magnetic frustration in metallic systems is still under debate. CePdAl is a metallic Kondo system, where geometric magnetic frustration arises from the formation of Ce ions on a distorted Kagome lattice. Neutron scattering experiments revealed, that only two thirds of the magnetic Ce moments order antiferromagnetically below T{sub N}=2.7 K, whereas the other third remains mainly disordered. Thermodynamic as well as neutron scattering measurements are presented to verify the existence of partial magnetic frustration in CePdAl. Recently neutron diffraction experiments under magnetic fields applied along two orthogonal directions in the magnetically hard basal plane were performed. They show opposite effects on the magnetic intensity of a selected magnetic domain depending on the field direction with respect to the propagation vector. If this is only an effect of different domain population or also due to a change in magnetic frustration shall be discussed.

Room-temperature synthesis and photoluminescence of hexagonal CePO4 nanorods

Science.gov (United States)

Zhu, J.; Zhang, K.; Zhao, H. Y.

2018-01-01

Hexagonal CePO4 nanorods were synthesized via a simple chemical precipitation route at room-temperature without the presence of surfactants and then characterized by powder X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectrometry, scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption and photoluminescence (PL) spectroscopy. Hexagonal CePO4 nanorods exhibit strong ultraviolet absorption and ultraviolet luminescence, which correspond to the electronic transitions between 4f and 5d state of Ce3+ ions.

Study of CeO{sub x}, PrO{sub x}, and Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}} films on Si(111) by means of high-energetic X-ray photoelectron spectroscopy; Untersuchung von CeO{sub x}-, PrO{sub x}- und Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}}- Filmen auf Si (111) mittels hochenergetischer Roentgen-Photoelektronenspektroskopie

Energy Technology Data Exchange (ETDEWEB)

Allahgholi, Aschkan

2013-03-15

The intention of this work is to shed light on two much discussed topics in the study of rare earth oxides (REO) by hard x-ray photoelectron spectroscopy (HAXPES): (i) Due to the complex spectral shape of the Ce3d region, there have been many discussions on proper approaches to determine the concentration of Ce{sup 3+} and Ce{sup 4+} species in CeO{sub x} over the last decades. (ii) Recently, the true electron structure of rare earth oxides gained new attention, since ab initio calculations showed the necessity of considering additional inter atomic charge transfer to Ce5d levels. Using HAXPES and resonant HAXPES, the question of the true electronic structure of rare earth oxides is approached from the experimental side. As a third topic, the obtained results for cerium oxide and praseodymium oxide are applied in order to investigate the plasma oxidized mixed oxide Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}} grown on Si(111) during thermal reduction. (orig.)

Air, aqueous and thermal stabilities of Ce3+ ions in cerium oxide nanoparticle layers with substrates

KAUST Repository

Naganuma, Tamaki

2014-01-01

Abundant oxygen vacancies coexisting with Ce3+ ions in fluorite cerium oxide nanoparticles (CNPs) have the potential to enhance catalytic ability, but the ratio of unstable Ce3+ ions in CNPs is typically low. Our recent work, however, demonstrated that the abundant Ce3+ ions created in cerium oxide nanoparticle layers (CNPLs) by Ar ion irradiation were stable in air at room temperature. Ce valence states in CNPs correlate with the catalytic ability that involves redox reactions between Ce3+ and Ce4+ ions in given application environments (e.g. high temperature in carbon monoxide gas conversion and immersion conditions in biomedical applications). To better understand the mechanism by which Ce3+ ions achieve stability in CNPLs, we examined (i) extra-long air-stability, (ii) thermal stability up to 500 °C, and (iii) aqueous stability of Ce 3+ ions in water, buffer solution and cell culture medium. It is noteworthy that air-stability of Ce3+ ions in CNPLs persisted for more than 1 year. Thermal stability results showed that oxidation of Ce 3+ to Ce4+ occurred at 350 °C in air. Highly concentrated Ce3+ ions in ultra-thin CNPLs slowly oxidized in water within 1 day, but stability was improved in the cell culture medium. Ce 3+ stability of CNPLs immersed in the medium was associated with phosphorus adsorption on the Ce3+ sites. This study also illuminates the potential interaction mechanisms of stable Ce3+ ions in CNPLs. These findings could be utilized to understand catalytic mechanisms of CNPs with abundant oxygen vacancies in their application environments. © The Royal Society of Chemistry 2014.