WorldWideScience

Sample records for window treatment industry

  1. Windows

    DEFF Research Database (Denmark)

    Heiselberg, Per; Svidt, Kjeld; Nielsen, Peter V.

    In natural ventilation systems fresh air is often provided through opening of windows. However, the knowledge of the performance of windows is rather limited. Computation of natural ventilation air flow through windows is most commonly made using discharge coefficients, that are regarded as being...... constant. The reported results show that the discharge coefficient for a window opening cannot be regarded as a constant and that it varies considerably with the size of the opening area, the window type and the temperature difference. Therefore, the use of a constant value can lead to serious errors...

  2. A London shop window for PPARC industry partnership successes

    CERN Multimedia

    Neale, R

    2002-01-01

    The UK Particle Physics and Astronomy Research Council recently held a seminar in London to reveal the results of the impressive work they are doing in fostering partnerships between science and industry. They have many different types of funded programmes, the purpose of all of them is to encourage industry and entrepreneurs to both benefit from and service the requirements of particle physics science and technology (1 page).

  3. Impact of window size of extracranial stereotactic treatments Gating with respiratory synchronization

    International Nuclear Information System (INIS)

    Sanchez Rubio, P.; Castro Tejero, P.; Medrano Prado, J. C.

    2011-01-01

    The choice of the gating window is to find a compromise between the duration of the treatment session and the accuracy and precision in the administration. This paper analyzes the dosimetric impact depending on the selected gating window.

  4. Anti-reflection treatments for JET millimeter wave diagnostic windows

    International Nuclear Information System (INIS)

    Hughes, T.P.; Richards, S.D.; Bartlett, D.V.

    1993-01-01

    This paper discusses low-power windows for millimeter-wave diagnostics on the JET torus. When tritium is used as a fusion fuel in JET repairs will be difficult on the radioactive machine and additional precautions must be taken to avoid vacuum leaks. Double, interpumped vacuum windows will be necessary. Window design is further restricted by the requirement that the bond between the window itself and its supporting ferrule must withstand repeated cycling to a working temperature of about 250 C. The most satisfactory arrangement for low power millimeter waves uses z-cut crystal quartz windows, gold diffusion bonded to stainless steel ferrules, as manufactured by the Special Techniques Group of AEA Technology. Where possible wedged windows are avoided for ease of alignment

  5. Windows of opportunities and technological innovation in the Brazilian pharmaceutical industry.

    Science.gov (United States)

    Tigre, Paulo Bastos; Nascimento, Caio Victor Machado França do; Costa, Laís Silveira

    2016-11-03

    The Brazilian pharmaceutical industry is heavily dependent on external sources of inputs, capital, and technology. However, the emergence of technological opportunities and the development of biotechnology and the decline of the patent boom and resulting advances by generic drugs have opened windows of opportunities for the local industry. The article examines the Brazilian industry's innovative behavior vis-à-vis these opportunities, showing that although the industry as a whole invests little in innovation, a few large Brazilian companies have expanded their market share and stepped up their investments in research and development, supported by public policies for innovation. Resumo: A indústria farmacêutica brasileira caracteriza-se pela grande dependência de fontes externas de insumos, capital e tecnologia. O surgimento de oportunidades tecnológicas, associadas ao desenvolvimento da biotecnologia e ao fim do boom das patentes com o consequente avanço dos medicamentos genéricos, entretanto, vem abrindo janelas de oportunidades para a indústria local. Este artigo examina o comportamento inovador da indústria brasileira à luz dessas oportunidades, revelando que, embora o conjunto da indústria mantenha baixos níveis de investimentos em inovação, um pequeno grupo de grandes empresas nacionais vem ampliando sua participação no mercado e intensificando seus investimentos em pesquisa e desenvolvimento, apoiados por políticas públicas de inovação.

  6. Chemical Industry Waste water Treatment

    International Nuclear Information System (INIS)

    Nasr, F.A.; Doma, H.S.; El-Shafai, S.A.; Abdel-HaJim, H.S.

    2004-01-01

    Treatment of chemical industrial wastewater from building and construction chemicals factory and plastic shoes manufacturing factory was investigated. The two factories discharge their wastewater into the public sewerage network. The results showed the wastewater discharged from the building and construction chemicals factory was highly contaminated with organic compounds. The average values of COD and BOD were 2912 and 150 mg O 2 /l. Phenol concentration up to 0.3 mg/l was detected. Chemical treatment using lime aided with ferric chloride proved to be effective and produced an effluent characteristics in compliance with Egyptian permissible limits. With respect to the other factory, industrial wastewater was mixed with domestic wastewater in order to lower the organic load. The COD, BOD values after mixing reached 5239 and 2615 mg O 2 /l. The average concentration of phenol was 0.5 mg/l. Biological treatment using activated sludge or rotating biological contactor (RBe) proved to be an effective treatment system in terms of producing an effluent characteristic within the permissible limits set by the law

  7. Irradiation in industrial waste treatment

    International Nuclear Information System (INIS)

    Perkowski, J.

    1984-01-01

    In this paper, the treatment by irradiation of some surface active agents (SAA) contained in aqueous solutions and industrial wastes, has been shown. Studies were carried out on selected SAA, namely Rokafenol N-6 and Pretepon G-extra, representatives of nonionic and anionic SAA, respectively. The aqueous solutions of these compounds were irradiated in radiation chamber, at the Institute of Applied Radiation Chemistry, in Lodz Polytechnic. Co 60 was used as a source of radiation. The kinetics and degree of destruction of these compounds at the doses ranging from 2 kGy to 110 kGy were investigated. The study was extended to attempts to remove SAA from textile effluents. Reduction of other parameters of contamination, including measurements of toxicity, were also evaluated. (author)

  8. Short communication: Industrial effluent treatments using heavy ...

    African Journals Online (AJOL)

    Bioflocculants produced by Herbaspirillium sp. CH7, Paenibacillus sp. CH11, Bacillus sp. CH15 and a Halomonas sp. were preliminarily evaluated as flocculating agents in the treatment of industrial wastewater effluents. Industrial (1 local chemical-industry and 2 textile-industry: Biavin 109-medium blue dye and Whale dye) ...

  9. Opening a New Time Window for Treatment of Stroke by Targeting HDAC2.

    Science.gov (United States)

    Lin, Yu-Hui; Dong, Jian; Tang, Ying; Ni, Huan-Yu; Zhang, Yu; Su, Ping; Liang, Hai-Ying; Yao, Meng-Cheng; Yuan, Hong-Jin; Wang, Dong-Liang; Chang, Lei; Wu, Hai-Yin; Luo, Chun-Xia; Zhu, Dong-Ya

    2017-07-12

    Narrow therapeutic window limits treatments with thrombolysis and neuroprotection for most stroke patients. Widening therapeutic window remains a critical challenge. Understanding the key mechanisms underlying the pathophysiological events in the peri-infarct area where secondary injury coexists with neuroplasticity over days to weeks may offer an opportunity for expanding the therapeutic window. Here we show that ischemia-induced histone deacetylase 2 (HDAC2) upregulation from 5 to 7 d after stroke plays a crucial role. In this window phase, suppressing HDAC2 in the peri-infarct cortex of rodents by HDAC inhibitors, knockdown or knock-out of Hdac2 promoted recovery of motor function from stroke via epigenetically enhancing cells survival and neuroplasticity of surviving neurons as well as reducing neuroinflammation, whereas overexpressing HDAC2 worsened stroke-induced functional impairment of both WT and Hdac2 conditional knock-out mice. More importantly, inhibiting other isoforms of HDACs had no effect. Thus, the intervention by precisely targeting HDAC2 in this window phase is a novel strategy for the functional recovery of stroke survivors. SIGNIFICANCE STATEMENT Narrow time window phase impedes current therapies for stroke patients. Understanding the key mechanisms underlying secondary injury may open a new window for pharmacological interventions to promote recovery from stroke. Our study indicates that ischemia-induced histone deacetylase 2 upregulation from 5 to 7 d after stroke mediates the secondary functional loss by reducing survival and neuroplasticity of peri-infarct neurons as well as augmenting neuroinflammation. Thus, precisely targeting histone deacetylase 2 in the window phase provides a novel therapeutic strategy for stroke recovery. Copyright © 2017 the authors 0270-6474/17/376712-17$15.00/0.

  10. Innovation strategy management survey of the Chilean biomedical industry. Assessment of windows of opportunities to reduce technological gaps.

    Science.gov (United States)

    Bas, Tomas Gabriel; Oliu, Carolina Alejandra

    2018-02-09

    The convergence of different theories (ie, catch-up effect and windows of opportunities) allows for the interpretation of different "technological innovation gaps" in Chile's biomedical industry. It is common knowledge that Chile has always had an economy almost exclusively based on services, commodities, and mainly in the exploitation of natural resources with low value added. The literature confirms that countries that concentrate their economies on the knowledge, research, development, and commercialization of technology and innovation have a better and more stable growth rate in the medium and long run. The "Asian Tigers" are a good example of this. Analyzing the technological gaps that affect the Chilean biomedical industry, it is possible to find windows of opportunities to catch up. This could allow the country to take its knowledge, skills, and capabilities further, thus enabling Chile to not just depend on its unpredictable natural resources. For the first time, a quantitative diagnosis of the Chilean biomedical industry was made. This study considered the Chilean biomedical industry and its innovation and entrepreneurship environment, taking into account its productive capacities and its potential to make progress in technological innovation and, as a result, dramatically reducing technological gaps through windows of opportunities. Copyright © 2018 John Wiley & Sons, Ltd.

  11. Critical evaluation of round window membrane sealing in the treatment of idiopathic sudden unilateral hearing loss.

    Science.gov (United States)

    Hoch, Stephan; Vomhof, Thomas; Teymoortash, Afshin

    2015-03-01

    Rupture of the round window membrane with consecutive development of a perilymphatic fistula (PLF) is still a matter of controversial debate in the pathogenesis of idiopathic sudden sensorineural hearing loss (SSHL). Until now no consensus exists about whether these patients benefit from performing an exploratory tympanotomy with sealing of the round window. The aim of the present study was to analyze critically the effectiveness of sealing the round window membrane in patients with SSHL. The clinical data of 51 patients with SSHL and a mean hearing decline of at least 60 dB over 5 frequencies who were treated with tympanotomy and sealing of the round window membrane were retrospectively analyzed. The results have been compared to the current state of the literature. Intraoperatively a round window membrane rupture or fluid leak was observed in none of the patients. After performing tympanotomy the mean improvement of hearing level was 32.7 dB. Twenty of 51 examined patients (39.2%) showed a mean improvement of the hearing level of more than 30 dB and a complete remission could be detected in 12 patients (23.5%). Reviewing the literature revealed no standard guidelines for definition or treatment of SSHL as well as for evaluation of hearing loss and its recovery. The results of the present study and the literature should be discussed critically. It is unclear whether tympanotomy and sealing of the round window membrane may be a meaningful treatment for SSHL. Therefore this procedure should be discussed as a therapeutic option only in selected patients with sudden deafness or profound hearing loss in which PLF is strongly suspicious or conservative treatment failed.

  12. Round window plugging in the treatment of superior semicircular canal dehiscence.

    Science.gov (United States)

    Succar, Eric F; Manickam, Periakaruppan V; Wing, Sara; Walter, Jeffrey; Greene, Joseph S; Azeredo, William J

    2017-10-09

    Objectives were to describe the use of round window plugging for superior semicircular canal dehiscence syndrome and review further recommendations regarding the procedure based on our experience and to compare results with recent literature on round window plugging. Retrospective case series. Fourteen patients underwent round window plugging for superior semicircular canal dehiscence at our institution from 2012 to 2015. All patients underwent the same surgical procedure. Available pre- and postoperative data were reviewed. Fourteen patient charts were reviewed. Symptoms of autophony improved in nine of 14 (64%) patients. Symptoms of pressure-induced vertigo improved in seven of 12 (58%) patients. Hennebert's sign that was positive preoperatively only improved in one of six (17%) patients. A positive preoperative vestibular evoked myogenic potential improved in only one of six (17%) patients. Six of 13 (46%) patients had increased air conduction thresholds postoperatively. Round window plugging has been described as a less-invasive treatment for patients with superior semicircular canal dehiscence. Although the procedure did benefit some of our patients, successful outcomes were not predictable. Improvement in at least one objective finding was seen in only 21% of the patients studied. Hennebert's sign and vestibular evoked myogenic potentials that were positive preoperatively only improved in 17% of patients. At our institution, round window plugging is no longer considered a reasonable treatment option for most patients with superior semicircular canal dehiscence. We recommend that further study on this topic follow a standardized pre- and postoperative assessment. 4 Laryngoscope, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

  13. Aspects of Industrial Water Treatment.

    Science.gov (United States)

    1978-02-01

    Coagulation /Flocculation AI(OH)3, Fe(OE)3, Mn(OH) 2 , CaC12 !Chlorination ChloroalnesChlorinated organics 4 ’Boiler blowdown Phosphates, carbonates, tannin ...ad miteriag of water treatment operatious imould pro- vide the moesseery data te ea reesurcee to be coeerved sod to lower the cost of pellem aba*tmomt...Noncarbonate hardness as CsC0 3Odor Taste Trace organic defined by carbon chloroform extract (CCE) Boiler-feedvater and boiler water tests also include

  14. Introduction to Effluent Treatment and Industrial Methods

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 11. Techniques of WasteWater Treatment - Introduction to Effluent Treatment and Industrial Methods. Amol A Kulkarni Mugdha Deshpande A B Pandit. General Article Volume 5 Issue 11 November 2000 pp 56-68 ...

  15. Electron beam treatment of industrial wastewater

    International Nuclear Information System (INIS)

    Han, Bumsoo; Kim, JinKyu; Kim, Yuri

    2004-01-01

    For industrial wastewater with low impurity levels such as contaminated ground water, cleaning water and etc., purification only with electron beam is possible, but it should be managed carefully with reducing required irradiation doses as low as possible. Also for industrial wastewater with high impurity levels such as dyeing wastewater, leachate and etc., purification only with electron beam requires high amount of doses and far beyond economies. Electron beam treatment combined with conventional purification methods such as coagulation, biological treatment, etc. is suitable for reduction of non-biodegradable impurities in wastewater and will extend the application area of electron beam. A pilot plant with electron beam for treating 1,000 m 3 /day of wastewater from dyeing industries has constructed and operated continuously since Oct 1998. Electron beam irradiation instead of chemical treatment shows much improvement in removing impurities and increases the efficiency of biological treatment. Actual plant is under consideration based upon the experimental results. (author)

  16. Technical note Biological treatment of industrial wastewater ...

    African Journals Online (AJOL)

    The biological treatment of wastewater from an aminoplastic resin-producing industry was studied in a pre-denitrification system. This study reports results on the removal of organic matter and nitrogen compounds from wastewater which contained high levels of formaldehyde and formic acid. The formaldehyde ...

  17. Impact of window size of extracranial stereotactic treatments Gating with respiratory synchronization; Analisis de las correcciones interfraccion en el posicionamiento de los pacientes mediante IGRT

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Rubio, P.; Castro Tejero, P.; Medrano Prado, J. C.

    2011-07-01

    The choice of the gating window is to find a compromise between the duration of the treatment session and the accuracy and precision in the administration. This paper analyzes the dosimetric impact depending on the selected gating window.

  18. Industrial wastewater treatment with electron beam

    International Nuclear Information System (INIS)

    Han, Bumsoo; Ko, Jaein; Kim, Jinkyu; Kim, Yuri; Chung, Wooho

    2001-01-01

    Global withdrawals of water to satisfy human demands have grown dramatically in this century. Between 1900 and 1945, water consumption increased by over six times, more than double the rate of population growth. This rapid growth in water demand is due to the increasing reliance on irrigation to achieve food security, the growth of industrial uses, and the increasing use per capita for domestic purposes. Given the seriousness of the situation and future risk of crises, there is an urgent need to develop the water-efficient technologies including economical treatment methods of wastewater and polluted water. In the Central Research Institute of Samsung Heavy Industries (SHI), many industrial wastewater including leachate from landfill area, wastewater from papermill, dyeing complex, petrochemical processes, etc. are under investigation with electron beam irradiation. For the study of treating dyeing wastewater combined with conventional facilities, an electron beam pilot plant for treating 1,000m 3 /day of wastewater from 80,000m 3 /day of total dyeing wastewater has constructed and operated in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from Papermill Company is also designed for S-paper Co. in Cheongwon City, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process. (author)

  19. Tympanotomy and sealing of the round window for treatment of sudden deafness

    DEFF Research Database (Denmark)

    Ul-Mulk, Jamshaid; Friis, Søren; Hahn, Christoffer Holst

    2011-01-01

    The objective of this study was to evaluate the effectiveness of explorative tympanotomy and sealing of the round window in patients diagnosed with sudden deafness.......The objective of this study was to evaluate the effectiveness of explorative tympanotomy and sealing of the round window in patients diagnosed with sudden deafness....

  20. The impact of skin decontamination on the time window for effective treatment of percutaneous VX exposure.

    Science.gov (United States)

    Joosen, M J A; van den Berg, R M; de Jong, A L; van der Schans, M J; Noort, D; Langenberg, J P

    2017-04-01

    The main goal of the present study was to obtain insight into depot formation and penetration following percutaneous VX poisoning, in order to identify an appropriate decontamination window that can enhance or support medical countermeasures. The study was executed in two phases, using the hairless guinea pig as an animal model. In the first phase the effect of various decontamination regimens on levels of free VX in skin and plasma were studied as well as on blood cholinesterase levels. Animals were exposed to 0.5 mg/kg VX and were not decontaminated (control), decontaminated with RSDL once at 15 or 90 min after exposure or three times at 15, 25 and 35 (10-min interval) or 15, 45 and 75 min after exposure (30-min interval). There was no significant effect of any of the decontamination regimens on the 6-h survival rate of the animals. However, all animals that had been decontaminated 15 min after exposure, showed a survival rate of more than 90%, compared to 50-60% in animals that were not decontaminated or decontaminated at 90 min after exposure. In the second phase of the study, hairless guinea pigs were exposed to 1 mg/kg VX on the shoulder, followed either by decontamination with RSDL (10 min interval), conventional treatment on indication of clinical signs or a combination thereof. It appeared that a thorough, repeated decontamination alone could not save the majority of the animals. A 100% survival rate was observed in the group that received a combination of decontamination and treatment. In conclusion, the effects of VX exposure could be influenced by various RSDL decontamination regimens. The results in freely moving animals showed that skin decontamination, although not fully effective in removing all VX from the skin and skin depot is crucial to support pharmacological intervention. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  1. Physiochemical Treatment of Textile Industry Effluents

    International Nuclear Information System (INIS)

    Latif, M. I.; Qazi, M. A.; Khan, H.; Ahmad, N.

    2015-01-01

    The study mainly focuses on the application of chemical Coagulants (Lime, Alum and Ferrous Sulfate) and Advanced Oxidation Processes (AOPs) (Ozone Treatment and Fenton Process, alone and in combination) to treat textile industry effluents, optimization of coagulation process for various Coagulants in terms of process conditions, including coagulant dose, pH and settling time. The results revealed that Alum was most effective. The efficiency of coagulation process was dose dependent and 400 mg/L dose of Alum alone showed maximum color removal of 47%, 57% and 54% of yellow, red and blue dyes, respectively in addition to the COD removal of 44%. The combined applications of Alum and Lime (300:75 mg/L) and Lime and Alum (300:75 mg/L) showed slightly better COD removal of 51%. However, color removal efficiency of all coagulants was at par. The Ozonation process appeared the most promising for the treatment of waste water and color/COD removal, the efficiency of which increased with increasing the treatment time at constant Ozone dose. For less polluted effluents, 97% color removal was obtained after 1 minute and after 15 minutes for highly polluted effluents; The COD removal efficiency of the process for less polluted effluents was around 89% after 5 minutes Ozonation and for highly polluted effluents 88% COD removal after 40 minutes. The performance of Fenton process was extremely low as compared to Ozonation process. Increase in pH, significantly decreased the color removal efficiency of the process. COD removal efficiency of Fenton process increased with an increase in settling time. (author)

  2. 40 CFR 35.925-15 - Treatment of industrial wastes.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Treatment of industrial wastes. 35.925... § 35.925-15 Treatment of industrial wastes. That the allowable project costs do not include (a) costs... sources or (b) costs allocable to the treatment for control or removal of pollutants in wastewater...

  3. The impact of skin decontamination on the time window for effective treatment of percutaneous VX exposure

    NARCIS (Netherlands)

    Joosen, M.J.A.; Berg, R.M. van den; Jong, A.L. de; Schans, M.J. van der; Noort, D.; Langenberg, J.P.

    2017-01-01

    The main goal of the present study was to obtain insight into depot formation and penetration following percutaneous VX poisoning, in order to identify an appropriate decontamination window that can enhance or support medical countermeasures. The study was executed in two phases, using the hairless

  4. Transient captopril treatment of SHR in juvenile developmental window: Mechanism of persistent reduction

    Czech Academy of Sciences Publication Activity Database

    Zicha, Josef; Dobešová, Zdenka; Hojná, Silvie; Kuneš, Jaroslav

    2005-01-01

    Roč. 46, č. 4 (2005), s. 912-912 ISSN 0194-911X. [Annual Meeting of the European Council for Cardiovascular Research (ECCR) /10./. 14.10.2005-16.10.2005, La Colle sur Loup] R&D Projects: GA MZd(CZ) NR7786 Keywords : captopril * SHR * developmental window * BP reduction Subject RIV: ED - Physiology

  5. Assessing the value and pest management window provided by neonicotinoid seed treatments for management of soybean aphid (Aphis glycines Matsumura) in the Upper Midwestern United States.

    Science.gov (United States)

    Krupke, Christian H; Alford, Adam M; Cullen, Eileen M; Hodgson, Erin W; Knodel, Janet J; McCornack, Brian; Potter, Bruce D; Spigler, Madeline I; Tilmon, Kelley; Welch, Kelton

    2017-10-01

    A 2-year, multi-state study was conducted to assess the benefits of using soybean seed treated with the neonicotinoid thiamethoxam to manage soybean aphid in the upper Midwestern USA and compare this approach with an integrated pest management (IPM) approach that included monitoring soybean aphids and treating with foliar-applied insecticide only when the economic threshold was reached. Concentrations of thiamethoxam in soybean foliage were also quantified throughout the growing season to estimate the pest management window afforded by insecticidal seed treatments. Both the IPM treatment and thiamethoxam-treated seed resulted in significant reductions in cumulative aphid days when soybean aphid populations reached threshold levels. However, only the IPM treatment resulted in significant yield increases. Analysis of soybean foliage from thiamethoxam-treated seeds indicated that tissue concentrations of thiamethoxam were statistically similar to plants grown from untreated seeds beginning at the V2 growth stage, indicating that the period of pest suppression for soybean aphid is likely to be relatively short. These data demonstrate that an IPM approach, combining scouting and foliar-applied insecticide where necessary, remains the best option for treatment of soybean aphids, both in terms of protecting the yield potential of the crop and of break-even probability for producers. Furthermore, we found that thiamethoxam concentrations in foliage are unlikely to effectively manage soybean aphids for most of the pests' activity period across the region. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  6. Windows Azure

    CERN Document Server

    Johnson, Bruce; Chambers, James; Garber, Danny; Malik, Jamal; Fazio, Adam

    2013-01-01

    A collection of five must-have Azure titles, from some of the biggest names in the field Available individually, but at a discounted rate for the collection, this bundle of five e-books covers key developer and IT topics of Windows Azure, including ASP.NET, mobile services, web sites, data storage, and the hybrid cloud. A host of Microsoft employees and MPVs come together to cover the biggest challenges that professionals face when working with Windows Azure. The e-books included are as follows: Windows Azure and ASP.NET MVC MigrationWindows Azure Mobile ServicesWindows Azure Web SitesWindows

  7. Nutrients requirements in biological industrial wastewater treatment ...

    African Journals Online (AJOL)

    Wastewaters from olive mills and pulp and paper mill industries in Jordan have been characterized and treated using laboratory scale anaerobic and aerobic sequencing batch reactors, respectively. Nutrient requirements for these two industrial wastewaters were found to be less than what is usually reported in the literature ...

  8. Gamma radiation treatment of waste waters from textile industries in ...

    African Journals Online (AJOL)

    Effects of gamma irradiation alone, and in combination with chemical treatment on color, odor, chemical oxyg-en demand (COD) and suspended solids in waste waters from textile industries in Ghana were studied to explore the potential of alternative and innovative processes for treatment of industrial waste waters. Waste ...

  9. Using a sequential explanatory mixed method to evaluate the therapeutic window of opportunity for initiating osteoporosis treatment following fragility fractures.

    Science.gov (United States)

    Roux, S; Gaboury, I; Gionet-Landry, N; Garant, M-P; Beaulieu, M-C; Carrier, N; Cabana, F; Boire, G

    2018-04-01

    Interventions targeting patients with recent fragility fracture and their physician were most successful at initiating osteoporosis treatment during the first 12 months. This window of opportunity had already closed after 1 year. The reasons for declining or accepting the intensive intervention were explored in patients still untreated at 12 months. A fragility fracture (FF) event identifies patients most likely to benefit from osteoporosis treatment. Nonetheless, most FF patients go untreated. Our objective was to determine how long an incident FF remains a strong incentive to initiate osteoporosis treatment. A total of 1086 men and women over age 50 with a recent FF event were assigned to either standard care (SC), to minimal (MIN), or intensive (INT) interventions targeting patients and their family physician to initiate osteoporosis treatment. Inpatients with FF (mainly hip) evaluated by rheumatologists were also included in a specialized group (SPE; n = 324). At 1 year, untreated patients in both the SC and the MIN groups were offered an INT intervention. The cohort was followed through 48 months. A qualitative analysis of patient-centered decision-making associated with initiation of treatment was conducted. In MIN and INT groups, osteoporosis treatment was initiated in 41.0 and 54.3% of untreated patients by 12 months, respectively, compared to 68.4% in SPE and 18.9% in SC groups; initiation rates drastically dropped thereafter. Over 4863 patient-years of follow-up, the rates of new FF were 3.4 per 100 patient-years, without significant differences between patients with initial major or minor FF, nor between control or intervention groups. Failure by patients and physicians to recognize FF as a sign of underlying bone disease contributed the most to lack of treatment. While incident FFs are an ideal opportunity for starting osteoporosis treatment, 1 year later, the therapeutic window of opportunity has already closed.

  10. Ion exchange for treatment of industrial effluents

    International Nuclear Information System (INIS)

    Moreno Daudinot, Aurora Maria; Ge Leyva, Midalis

    2016-01-01

    The acid leaching and ammoniacal carbonate technologies of laterite respectively, are responsible for the low quality of life of the local population, the big deforested areas due to the mining tilling, the elevated contents of solids in the air and waters, as well as the chemical contamination by metals presence, the acidity or basicity of the effluents of both industries, that arrive through the river and the bay to aquifer's mantle. The ion exchange resins allow ions separation contained in low concentrations in the solutions, where the separation of these elements for solvents, extraction or another chemical methods would be costly. Technological variants are proposed in order to reduce the impact produced on the flora and the fauna, by the liquid effluents of nickel industry, by means of ion exchange resins introduction as well as the recuperation of metals and their re incorporation to the productive process. (Author)

  11. Efficient Windows Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    Nils Petermann

    2010-02-28

    The project goals covered both the residential and commercial windows markets and involved a range of audiences such as window manufacturers, builders, homeowners, design professionals, utilities, and public agencies. Essential goals included: (1) Creation of 'Master Toolkits' of information that integrate diverse tools, rating systems, and incentive programs, customized for key audiences such as window manufacturers, design professionals, and utility programs. (2) Delivery of education and outreach programs to multiple audiences through conference presentations, publication of articles for builders and other industry professionals, and targeted dissemination of efficient window curricula to professionals and students. (3) Design and implementation of mechanisms to encourage and track sales of more efficient products through the existing Window Products Database as an incentive for manufacturers to improve products and participate in programs such as NFRC and ENERGY STAR. (4) Development of utility incentive programs to promote more efficient residential and commercial windows. Partnership with regional and local entities on the development of programs and customized information to move the market toward the highest performing products. An overarching project goal was to ensure that different audiences adopt and use the developed information, design and promotion tools and thus increase the market penetration of energy efficient fenestration products. In particular, a crucial success criterion was to move gas and electric utilities to increase the promotion of energy efficient windows through demand side management programs as an important step toward increasing the market share of energy efficient windows.

  12. Alteration processes of medieval stained glass windows. Study and protection treatments

    Directory of Open Access Journals (Sweden)

    Fernández Navarro, J. María

    1996-06-01

    Full Text Available The anxiety caused by the fast growing decay of historical stained glass windows as a consequence of increasing environmental pollution, encouraged institutions of several countries to sponsor a series of scientific works aimed both to slow down this fast forwarding deterioration and to develop repair and preservation methods. After an initial review of the chemical composition of the stained glass windows and of the differences depending on historical epochs and origins, a discussion about chemical attack mechanisms, degradation processes and formation of superficial crusts opens up. Finally, the methodology used in their cleaning and restoration is briefly exposed and some criteria on the still polemic quest.

    La inquietud creada por la creciente alteración que, como consecuencia del aumento de la contaminación atmosférica, están sufriendo las vidrieras históricas, ha movido a las instituciones de varios países a patrocinar la realización de una serie de trabajos científicos dirigidos, por una parte, a detener el avance de este deterioro y, por otra, a desarrollar métodos para su restauración y conservación. Tras una revisión inicial sobre la composición química de las vidrieras y sus diferencias según las distintas épocas y lugares de procedencia, se discuten los mecanismos de ataque químico, los procesos de degradación y la formación de costras superficiales. Finalmente se expone brevemente la metodología seguida para su limpieza y restauración y se comentan algunos de los criterios sobre la todavía polémica cuestión de los tratamientos de protección.

  13. Discussion on Wastewater Treatment Process of Coal Chemical Industry

    Science.gov (United States)

    Zhao, Dongyan; Lun, Weijie; Wei, Junjie

    2017-12-01

    Coal chemical wastewater has such characteristics as high concentration of oil, ammonia nitrogen and COD. In this paper, treatment process of coal chemical industry is described mainly, such as pretreatment process, biochemical treatment process and polishing process. Through the recovery of phenol and ammonia and the treatment of wastewater from abroad, the new technology of wastewater treatment in coal chemical industry was expounded. Finally, The development of coal chemical wastewater treatment technology is prospected, and the pretreatment technology is emphasized. According to the diversification and utilization of water, zero discharge of coal chemical wastewater will be fulfilled.

  14. Characterization and treatment of sludge from the petroleum industry

    African Journals Online (AJOL)

    Characterization and treatment of sludge from the petroleum industry. IO Asia, IB Enweani, IO Eguavoen. Abstract. Samples of sludge from the petroleum industry were collected and characterized for their pollution characteristics. The solids concentration, pH, temperature, biochemical oxygen demand, chemical oxygen ...

  15. Review on Chemical treatment of Industrial Waste Water | Sahu ...

    African Journals Online (AJOL)

    Industrialization played an important role for scio-economy of the country. Generally, a lot of water is used and lot of wastewater generated from industries due their processes and washing purpose. A large number of chemicals are used for the production of potable water and in the treatment of wastewater effluents.

  16. CAVE WINDOW

    Science.gov (United States)

    Levenson, M.

    1960-10-25

    A cave window is described. It is constructed of thick glass panes arranged so that interior panes have smaller windowpane areas and exterior panes have larger areas. Exterior panes on the radiation exposure side are remotely replaceable when darkened excessively. Metal shutters minimize exposure time to extend window life.

  17. Window Stories

    DEFF Research Database (Denmark)

    Hauge, Bettina

    This research project has investigated 17 households in Germany (cities and rural areas). The main aim was to learn about the significance of the window to these people: What they think of their windows, how, when and why they use them in their everyday life, if they have a favorite window and why......, as well as the opposite. The report also includes a special focus on overheating and people’s strategies against this. Knowing about what people appreciate in a window and their actual practices and the reasons for their behaviour may be useful in many different ways, for instance to inform public...... of ethnographic tools that required their involvement, such as making a diary of their heating experiences during a random week in the summer of 2014, taking photos of windows and sending postcards with specific tasks....

  18. Therapeutic Time Window for Edaravone Treatment of Traumatic Brain Injury in Mice

    Directory of Open Access Journals (Sweden)

    Kazuyuki Miyamoto

    2013-01-01

    Full Text Available Traumatic brain injury (TBI is a major cause of death and disability in young people. No effective therapy is available to ameliorate its damaging effects. Our aim was to investigate the optimal therapeutic time window of edaravone, a free radical scavenger which is currently used in Japan. We also determined the temporal profile of reactive oxygen species (ROS production, oxidative stress, and neuronal death. Male C57Bl/6 mice were subjected to a controlled cortical impact (CCI. Edaravone (3.0 mg/kg, or vehicle, was administered intravenously at 0, 3, or 6 hours following CCI. The production of superoxide radicals (O2∙- as a marker of ROS, of nitrotyrosine (NT as an indicator of oxidative stress, and neuronal death were measured for 24 hours following CCI. Superoxide radical production was clearly evident 3 hours after CCI, with oxidative stress and neuronal cell death becoming apparent after 6 hours. Edaravone administration after CCI resulted in a significant reduction in the injury volume and oxidative stress, particularly at the 3-hour time point. Moreover, the greatest decrease in O2∙- levels was observed when edaravone was administered 3 hours following CCI. These findings suggest that edaravone could prove clinically useful to ameliorate the devastating effects of TBI.

  19. Analysis of Wastewater Treatment Efficiency in a Soft Drinks Industry

    Science.gov (United States)

    Boguniewicz-Zabłocka, Joanna; Capodaglio, Andrea G.; Vogel, Daniel

    2017-10-01

    During manufacturing processes, most industrial plants generate wastewater which could become harmful to the environment. Discharge of untreated or improperly treated industrial wastewaters into surface water could, in fact, lead to deterioration of the receiving water body's quality. This paper concerns wastewater treatment solutions used in the soft drink production industry: wastewater treatment plant effectiveness analysis was determined in terms of basic pollution indicators, such as BOD, COD, TSS and variable pH. Initially, the performance of mechanic-biological systems for the treatment of wastewater from a specific beverages production process was studied in different periods, due to wastewater flow fluctuation. The study then showed the positive effects on treatment of wastewater augmentation by methanol, nitrogen and phosphorus salts dosed into it during the treatment process. Results confirm that after implemented modification (methanol, nitrogen and phosphorus additions) pollution removal occurs mostly with higher efficiency.

  20. Analysis of Wastewater Treatment Efficiency in a Soft Drinks Industry

    Directory of Open Access Journals (Sweden)

    Boguniewicz-Zabłocka Joanna

    2017-01-01

    Full Text Available During manufacturing processes, most industrial plants generate wastewater which could become harmful to the environment. Discharge of untreated or improperly treated industrial wastewaters into surface water could, in fact, lead to deterioration of the receiving water body's quality. This paper concerns wastewater treatment solutions used in the soft drink production industry: wastewater treatment plant effectiveness analysis was determined in terms of basic pollution indicators, such as BOD, COD, TSS and variable pH. Initially, the performance of mechanic-biological systems for the treatment of wastewater from a specific beverages production process was studied in different periods, due to wastewater flow fluctuation. The study then showed the positive effects on treatment of wastewater augmentation by methanol, nitrogen and phosphorus salts dosed into it during the treatment process. Results confirm that after implemented modification (methanol, nitrogen and phosphorus additions pollution removal occurs mostly with higher efficiency.

  1. Reverse osmosis treatment of wastes from the textile industry

    Energy Technology Data Exchange (ETDEWEB)

    Audran, J. [Electricite de France (EDF), 75 - Paris (France); Frizzarin, L.

    1995-09-01

    Reserve osmosis has been used in the textile industry for cleaning up effluent before sending it to the treatment plant. This process was preceded by a combination of flocculation and sedimentation. This system reduced water consumption since part of the water was reused, and also reduced the quantity of effluent to be dealt with by the treatment plant. (authors). 2 figs.

  2. A Novel Methylotrophic Bacterial Consortium for Treatment of Industrial Effluents.

    Science.gov (United States)

    Hingurao, Krushi; Nerurkar, Anuradha

    2018-01-01

    Considering the importance of methylotrophs in industrial wastewater treatment, focus of the present study was on utilization of a methylotrophic bacterial consortium as a microbial seed for biotreatment of a variety of industrial effluents. For this purpose, a mixed bacterial methylotrophic AC (Ankleshwar CETP) consortium comprising of Bordetella petrii AC1, Bacillus licheniformis AC4, Salmonella subterranea AC5, and Pseudomonas stutzeri AC8 was used. The AC consortium showed efficient biotreatment of four industrial effluents procured from fertilizer, chemical and pesticide industries, and common effluent treatment plant by lowering their chemical oxygen demand (COD) of 950-2000 mg/l to below detection limit in 60-96 h in 6-l batch reactor and 9-15 days in 6-l continuous reactor. The operating variables of wastewater treatment, viz. COD, BOD, pH, MLSS, MLVSS, SVI, and F/M ratio of these effluents, were also maintained in the permissible range in both batch and continuous reactors. Therefore, formation of the AC consortium has led to the development of an efficient microbial seed capable of treating a variety of industrial effluents containing pollutants generated from their respective industries.

  3. Acoustically accessible window determination for ultrasound mediated treatment of glycogen storage disease type Ia patients

    Science.gov (United States)

    Wang, Shutao; Raju, Balasundar I.; Leyvi, Evgeniy; Weinstein, David A.; Seip, Ralf

    2012-10-01

    Glycogen storage disease type Ia (GSDIa) is caused by an inherited single-gene defect resulting in an impaired glycogen to glucose conversion pathway. Targeted ultrasound mediated delivery (USMD) of plasmid DNA (pDNA) to liver in conjunction with microbubbles may provide a potential treatment for GSDIa patients. As the success of USMD treatments is largely dependent on the accessibility of the targeted tissue by the focused ultrasound beam, this study presents a quantitative approach to determine the acoustically accessible liver volume in GSDIa patients. Models of focused ultrasound beam profiles for transducers of varying aperture and focal lengths were applied to abdomen models reconstructed from suitable CT and MRI images. Transducer manipulations (simulating USMD treatment procedures) were implemented via transducer translations and rotations with the intent of targeting and exposing the entire liver to ultrasound. Results indicate that acoustically accessible liver volumes can be as large as 50% of the entire liver volume for GSDIa patients and on average 3 times larger compared to a healthy adult group due to GSDIa patients' increased liver size. Detailed descriptions of the evaluation algorithm, transducer-and abdomen models are presented, together with implications for USMD treatments of GSDIa patients and transducer designs for USMD applications.

  4. Wastewater treatment of pulp and paper industry: a review.

    Science.gov (United States)

    Kansal, Ankur; Siddiqui, Nihalanwar; Gautam, Ashutosh

    2011-04-01

    Pulp and paper industries generate varieties of complex organic and inorganic pollutants depending upon the type of the pulping process. A state-of-art of treatment processes and efficiencies of various wastewater treatment is presented and critically reviewed in this paper. Process description, source of wastewater and their treatment is discussed in detail. Main emphasis is given to aerobic and anaerobic wastewater treatment. In pulp and paper mill wastewater treatment aerobic treatment includes activated sludge process, aerated lagoons and aerobic biological reactors. UASB, fluidized bed, anaerobic lagoon and anaerobic contact reactors are the main technologies for anaerobic wastewater treatment. It is found that the combination of anaerobic and aerobic treatment processes is much efficient in the removal of soluble biodegradable organic pollutants. Color can be removed effectively by fungal treatment, coagulation, chemical oxidation, and ozonation. Chlorinated phenolic compounds and adsorable organic halides (AOX) can be efficiently reduced by adsorption, ozonation and membrane filtration techniques.

  5. “Appropriate Treatment” and Therapeutic Window in Spasticity Treatment with IncobotulinumtoxinA: From 100 to 1000 Units

    Directory of Open Access Journals (Sweden)

    Giancarlo Ianieri

    2018-03-01

    Full Text Available Many neurological diseases (ischemic and hemorrhagic stroke, multiple sclerosis, infant cerebral palsy, spinal cord injuries, traumatic brain injury, and other cerebrovascular disorders may cause muscle spasticity. Different therapeutic strategies have been proposed for the treatment of spasticity. One of the major treatments for tone modulation is botulinum toxin type A (BTX-A, performed in addition to other rehabilitation strategies based on individualized multidisciplinary programs aimed at achieving certain goals for each patient. Therapeutic plans must be precisely defined as they must balance the reduction of spastic hypertonia and retention of residual motor function. To perform and optimize the treatment, an accurate clinical and instrumental evaluation of spasticity is needed to determine how this symptom is invalidating and to choose the best doses, muscles and times of injection in each patient. We introduce an “appropriate treatment” and no “standard or high dosage treatment” concept based on our retrospective observational study on 120 patients lasting two years, according to the larger Therapeutic Index and Therapeutic Window of Incobotulinumtoxin A doses from 100 to 1000 units. We studied the efficiency and safety of this drug considering the clinical spasticity significance for specialist physicians and patients.

  6. Advances in the treatment of problematic industrial biofilms.

    Science.gov (United States)

    Xu, D; Jia, R; Li, Y; Gu, T

    2017-05-01

    In nature, microorganisms tend to form biofilms that consist of extracellular polymeric substances with embedded sessile cells. Biofilms, especially mixed-culture synergistic biofilm consortia, are notoriously difficult to treat. They employ various defense mechanisms against attacks from antimicrobial agents. Problematic industrial biofilms cause biofouling as well as biocorrosion, also known as microbiologically influenced corrosion. Biocides are often used to treat biofilms together with scrubbing or pigging. Unfortunately, chemical treatments suppress vulnerable microbial species while allowing resistant species to take over. Repeated treatment cycles are typically needed in biofilm mitigation. This leads to biocide dosage escalation, causing environmental problems, higher costs and sometimes operational problems such as scale formation. New treatment methods are being developed such as enhanced biocide treatment and bacteriophage treatment. Special materials such as antibacterial stainless steels are also being created to combat biofilms. This review discussed some of the advances made in the fight against problematic industrial biofilms.

  7. [Detoxification of textile industry effluents by photocatalytic treatment].

    Science.gov (United States)

    Gebrati, L; Idrissi, L Loukili; Mountassir, Y; Nejmeddine, A

    2010-05-01

    In Morocco the textile industry, representing 31% of all Moroccan industries, is accompanied by high water consumption and important wastewater discharges rejected without any treatment. The focus of this study was to characterize the effluent from the textile industry, to test separately the effect of UV light and TiO2 catalyst and to determine the optimum conditions (pH, concentration and reaction time) in photocatalytic treatment to reduce chemical oxygen demand (COD) and colour. The biodegradability of the effluent was also studied using a toxicity test before and after treatment. After 90 min of reaction time at pH 4 and with 1.5 g F' of TiO2 catalyst, the photocatalytic treatment reached a global removal rate of 53% for COD and 89% for discoloration of the effluent. The relation BOD5/COD increased from around 0 to 0.3. The effluent became accessible to a biological treatment. The toxicity was studied by the Daphnia magna test over 24 hours. The results have shown the important toxicity of these effluents, which are rich in organic matter and other chemical compounds. After treatment by photocatalytic oxidation, the CI50 24 increased from 3.8% to 22.8%. This reduction of toxicity is related to the reduction of COD (53%) and colour (89%). Photocatalytic treatment has been shown to have an environmental benefit and, in combination with a secondary biological treatment, can be important for a significant reduction in the pollution of textile effluents.

  8. Wilson's disease presenting as rapid eye movement sleep behavior disorder: a possible window to early treatment.

    Science.gov (United States)

    Tribl, Gotthard G; Bor-Seng-Shu, Edson; Trindade, Mateus C; Lucato, Leandro T; Teixeira, Manoel J; Barbosa, Egberto R

    2014-09-01

    To describe characteristics of REM sleep behavior disorder in Wilson's disease. Questionnaire-based interviews (patients and relatives), neurological examinations, two-week prospective dream-diary, video-polysomnography, transcranial sonography, MRI. Four Wilson's disease cases with REM sleep behavior disorder were described; three had REM sleep behavior disorder as initial symptom. All showed mesencephalic tegmental/tectal sonographic hyperechogenicities and two presented ponto-mesencephalic tegmental MRI hyperintensities. This first description of REM sleep behavior disorder in Wilson's disease in literature documents REM sleep behavior disorder as a possible presenting symptom of Wilson's disease and adds further evidence to the parallelism of Parkinson's disease and Wilson's disease in phenotype and brainstem topography, which ought to be further studied. REM sleep behavior disorder has prognostic relevance for neurodegeneration in α-synucleinopathies. In Wilson's disease, usefulness of early diagnosis and treatment are already well established. REM sleep behavior disorder in Wilson's disease offers a possible theoretical model for potential early treatment in this extrapyramidal and brainstem paradigm syndrome, previewing the possibility of neuroprotective treatment for REM sleep behavior disorder in "pre-clinical" Parkinson's disease.

  9. Nonremovable, windowed, fiberglass cast boot in the treatment of diabetic plantar ulcers: efficacy, safety, and compliance.

    Science.gov (United States)

    Ha Van, Georges; Siney, Hubert; Hartmann-Heurtier, Agnes; Jacqueminet, Sophie; Greau, Françoise; Grimaldi, André

    2003-10-01

    To compare the efficacy, safety, and compliance of a nonremovable fiberglass cast boot and off-loading shoes in the treatment of diabetic plantar ulcers. Patients (n = 93) with noninfected, nonischemic plantar ulcers were included in this prospective nonrandomized study. Treatment used a nonremovable fiberglass cast boot for longer standing and deeper ulcers (n = 42) and a half shoe or heel-relief shoe for other ulcers (n = 51). We evaluated off-loading therapy, compliance, and complications in both groups. The healing rate was significantly higher with the cast boot than with the off-loading shoe (81 vs. 70%, P = 0.017), with healing times of 68.6 +/- 35.1 vs. 134.2 +/- 133.0 days, respectively, and hazard ratio 1.68 (95% CI 1.04-2.70); complete compliance with treatment was 98 vs. 10% (P = 0.001), respectively. Secondary osteomyelitis developed in 3 patients in the cast boot group and 13 patients in the off-loading shoe group (P = 0.026). A nonremovable fiberglass cast boot was effective in healing diabetic plantar ulcers and in decreasing the risk of secondary osteomyelitis. The cast boot forced compliance with off-loading, thus promoting healing.

  10. Expanding the treatment window with mechanical thrombectomy in acute ischemic stroke

    Energy Technology Data Exchange (ETDEWEB)

    Layton, Kennith F.; Cloft, Harry J.; Kallmes, David F. [Mayo Clinic, Department of Radiology, Rochester, MN (United States); White, J. Bradley [Mayo Clinic, Department of Neurosurgery, Rochester, MN, (United States); Manno, Edward M. [Mayo Clinic, Department of Neurology, Rochester, MN, (United States)

    2006-06-15

    Acute ischemic stroke is a common disease associated with high mortality and significant long-term disability. Treatment options for acute ischemic stroke continue to evolve and include pharmaceutical and mechanical therapies. With the recent US Food and Drug Administration approval of a new device for mechanical thrombectomy, the options available for treatment of acute ischemic stroke have been expanded. Thrombolytic therapy is generally given intravenously in the first 3 h and up to 6 h via the intraarterial route for pharmacological clot disruption. The maximum time-frame for mechanical thrombectomy devices has yet to be determined. A 78-year-old female presented to the emergency room with a dense right hemiparesis, leftward gaze preference and dense global aphasia. Eight hours after symptom onset, left carotid angiography confirmed a left internal carotid artery terminus occlusion. A single pass was made through the clot with an X6 Merci Retriever device. After a single pass, the vessel was reopened and normal flow in the left internal carotid artery was demonstrated. At the time of discharge, her neurological deficits had improved significantly. Furthermore, the final infarct area, as demonstrated on magnetic resonance imaging, was probably much smaller than it would have been if the vessel had not been recanalized. (orig.)

  11. Treatment of Some Hazardous Industrial Pollutants by Simple Oxidation Techniques

    International Nuclear Information System (INIS)

    Abd El-Rahman, N.M.

    1999-01-01

    Central treatment of Industrial wastewater requires pretreatment of some specific pollutants which may be not effectively degraded in down stream processes in central treatment unit. Some of the hazardous pollutants in industrial wastewater including acrylonitrile, pesticides and some commonly used dyes (active and acid dyes) have been subjected individually to oxidation using hydrogen peroxide catalyzed by ferrous ions in acidic solution. Treatment efficiency was monitored by chemical oxygen demand (COD) removal using a specially developed concentration/COD curves. Initial concentrations (in terms of COD) were 910 PPM, 1348 and 530 ppm and the respective COD reductions were 91, 98 and 99%, for the pesticide, acrylonitrile and the reactive dye. Oxidative degradation of polared and acid green also reduced COD by 99 and 100% respectively. The obtained results confirm the appropriateness of oxidative degradation as a pretreatment for some hazardous pollutants prior to treatment in central facilities or municipal activated sludge stations

  12. Thermophilic biological nitrogen removal in industrial wastewater treatment.

    OpenAIRE

    Lopez-Vazquez, CM; Kubare, M; Saroj, DP; Chikamba, C; Schwarz, J; Daims, H; Brdjanovic, D

    2013-01-01

    Nitrification is an integral part of biological nitrogen removal processes and usually the limiting step in wastewater treatment systems. Since nitrification is often considered not feasible at temperatures higher than 40 °C, warm industrial effluents (with operating temperatures higher than 40 °C) need to be cooled down prior to biological treatment, which increases the energy and operating costs of the plants for cooling purposes. This study describes the occurrence of thermophilic biologic...

  13. Tertiary activated carbon treatment of paper and board industry wastewater

    NARCIS (Netherlands)

    Temmink, B.G.; Grolle, K.C.F.

    2005-01-01

    The feasibility of activated carbon post-treatment of (biologically treated) wastewater from the paper and board industry was investigated, the goal being to remove refractory organic pollutants and produce water that can be re-used in the production process. Because closing water-circuits in the

  14. An extended window of opportunity for G-CSF treatment in cerebral ischemia

    Directory of Open Access Journals (Sweden)

    Schwab Stefan

    2006-10-01

    Full Text Available Abstract Background Granulocyte-colony stimulating factor (G-CSF is known as a powerful regulator of white blood cell proliferation and differentiation in mammals. We, and others, have shown that G-CSF is effective in treating cerebral ischemia in rodents, both relating to infarct size as well as functional recovery. G-CSF and its receptor are expressed by neurons, and G-CSF regulates apoptosis and neurogenesis, providing a rational basis for its beneficial short- and long-term actions in ischemia. In addition, G-CSF may contribute to re-endothelialisation and arteriogenesis in the vasculature of the ischemic penumbra. In addition to these trophic effects, G-CSF is a potent neuroprotective factor reliably reducing infarct size in different stroke models. Results Here, we have further delayed treatment and studied effects of G-CSF on infarct volume in the middle cerebral artery occlusion (MCAO model and functional outcome in the cortical photothrombotic model. In the MCAO model, we applied a single dose of 60 μg/kg bodyweight G-CSF in rats 4 h after onset of ischemia. Infarct volume was determined 24 h after onset of ischemia. In the rat photothrombotic model, we applied 10 μg/kg bodyweight G-CSF daily for a period of 10 days starting either 24 or 72 h after induction of ischemia. G-CSF both decreased acute infarct volume in the MCAO model, and improved recovery in the photothrombotic model at delayed timepoints. Conclusion These data further strengthen G-CSF's profile as a unique candidate stroke drug, and provide an experimental basis for application of G-CSF in the post-stroke recovery phase.

  15. Predicting Treatment Windows for Invasive Buffelgrass in Southern Arizona using MODIS and Climate Data

    Science.gov (United States)

    Wallace, C.; Weltzin, J. F.; Skirvin, S. M.; Patrick-Birdwell, C.; Raichle, H.

    2014-12-01

    The increasing spread and abundance of an invasive perennial grass, buffelgrass (Pennisetum ciliare), represents an important shift in the vegetation composition of the Sonoran Desert in southern Arizona. Buffelgrass out-competes native species and alters fire regimes, and its control and management is a high-priority issue for resource managers who seek to preserve the unique and iconic Sonoran Desert flora. Herbicidal treatment of buffelgrass is most effective when the vegetation is actively growing; however, the erratic timing and length of active buffelgrass growth periods in southern Arizona confound effective management decision-making. The goal of our research is to enable the strategic application of buffelgrass herbicide by using remote sensing data to detect when and where buffelgrass is photosynthetically active. We integrated ground-based observations of buffelgrass phenology (green-up and senescence) in the Tucson, Arizona area with climate information and Moderate-resolution Imaging Spectroradiometer (MODIS) satellite imagery at 250m spatial and both 8-day and 16-day composite temporal resolution to understand dynamics, relationships and resonance between these disparate datasets during 2011 to 2013. Fourier harmonics analysis was used to derive land surface phenology (LSP) metrics from MODIS Enhanced Vegetation Index (EVI) greenness data and to quantify the temporal patterns of the climate and phenophase abundance datasets. Regression analyses and statistical tests were used to identify correlations between temporal patterns of the data sets. Our results reveal strong correlations between the observed greenness of in-situ buffelgrass and satellite LSP metrics, confirming that MODIS-EVI data can be a useful indicator of active buffelgrass growth at multiple scales. The analysis also reveals strong harmonics between precipitation and greenness, but with a lagged response, suggesting that precipitation can be a predictor of the location and intensity of

  16. Industrial waste treatment: the leather industry; Tratamiento conjunto de aguas residuales e industriales: caso de las industrias del curtido

    Energy Technology Data Exchange (ETDEWEB)

    Cortacans Torre, J.A.

    1995-07-01

    The industrial waste water treatment can be presented alone or together with the urban waste water. There are special industries that cannot treat their effluents together with municipal effluents, for example the leather industry. This industry uses sulfurs and equivalent chromium. The PH value is around 10. This waste water can`t be introduce directly into municipal collectors. This article presents the general recommendations for their treatment.

  17. The sustainable utilization of malting industry wastewater biological treatment sludge

    Science.gov (United States)

    Vasilenko, T. A.; Svintsov, A. V.; Chernysh, I. V.

    2018-01-01

    The article deals with the research of using the sludge from malting industry wastewater’s biological treatment and the calcium carbonate slurry as organo-mineral fertilizing additives. The sludge, generated as a result of industrial wastewater biological treatment, is subject to dumping at solid domestic waste landfills, which has a negative impact on the environment, though its properties and composition allow using it as an organic fertilizer. The physical and chemical properties of both wastes have been studied; the recommendations concerning the optimum composition of soil mix, containing the above-mentioned components, have been provided. The phytotoxic effect on the germination capacity and sprouts of cress (Lepidium sativum), barley (Hordéum vulgáre) and oats (Avena sativa) in soil mixes has been determined. The heavy metals and arsenic contents in the sludge does not exceed the allowable level; it is also free of pathogenic flora and helminthes.

  18. Radiation processing technology for industrial waste water treatment

    International Nuclear Information System (INIS)

    2011-01-01

    Radiation sterilization technology, cross-linked polymers and curing, food and environmental applications of the radiation is widely used for many years. At the same time, drinking water and wastewater treatment are the part of the radiation technology applications. For this purpose, drinking water and wastewater treatment plants in various countries has been established. In this project, gamma / electron beam radiation treatment is intended to be used for the treatment of alkaloid, textiles and polychlorinated biphenyls (PCBs) wastewater. In this regard, the chemical characterization of wastewater, the interaction with radiation, biological treatment and determination of toxicological properties are the laboratory studies milestones. After laboratory studies, the establishment of a pilot scale treatment plant has been planned. Within the framework of the project a series of dye used in textile industry were examined. Besides the irradiation, the changes in treatment efficiency were investigated by using of oxygen and hydrogen peroxide in conjunction with the irradiation. Same working methods were implemented in the wastewater treatment of Bolvadin Opium Alkaloid Factory as well. In addition to chemical analysis in this study, aerobic and anaerobic biological treatment process also have been applied. Standard reference materials has been used for the marine sediment study contaminated with polychlorinated biphenyls.

  19. Clinical Observation of Recombinant Human Vascular Endostatin Durative Transfusion Combined with Window Period Arterial Infusion Chemotherapy in the Treatment of 
Advanced Lung Squamous Carcinoma

    Directory of Open Access Journals (Sweden)

    Yuan LV

    2015-08-01

    Full Text Available Background and objective Lung cancer is one of the most common malignant tumors in China. The aim of this study is to observe the efficacy and safety of recombinant human vascular endostatin (endostar durative transfusion combined with window period arterial infusion chemotherapy in the treatment of advanced lung squamous carcinoma. Methods From February 2014 to January 2015, 10 cases of the cytological or histological pathology diagnosed stage IIIb - stage IV lung squamous carcinoma were treated with recombinant human vascular endostatin (30 mg/d durative transfusion combined with window period arterial infusion chemotherapy. Over the same period of 10 cases stage IIIb - stage IV lung squamous carcinoma patients for pure arterial perfusion chemotherapy were compared. Recombinant human vascular endostatin was durative transfused every 24 hours for 7 days in combination group, and in the 4th day of window period, the 10 patients were received artery infusion chemotherapy, using docetaxel combined with cisplatin. Pure treatment group received the same arterial perfusion chemotherapy regimen. 4 weeks was a cycle. 4 weeks after 2 cycles, to evaluate the short-term effects and the adverse drug reactions. Results 2 groups of patients were received 2 cycles treatments. The response rate (RR was 70.0%, and the disease control rate (DCR was 90.0% in the combination group; In the pure treatment group were 50.0%, 70.0% respectively, there were no statistically significant difference (P=0.650, 0.582. The adverse reactions of the treatment were mild, including level 1-2 of gastrointestinal reaction and blood toxicity, there were no statistically significant difference (P=0.999, P=0.628. In the combination group, 1 patient occurred level 1 of cardiac toxicity. Conclusion Recombinant human vascular endostatin durative transfusion combined with window period arterial infusion chemotherapy in the treatment of advanced lung squamous carcinoma could take a

  20. Strategic Windows

    DEFF Research Database (Denmark)

    Risberg, Annette; King, David R.; Meglio, Olimpia

    We examine the importance of speed and timing in acquisitions with a framework that identifies management considerations for three interrelated acquisition phases (selection, deal closure and integration) from an acquiring firm’s perspective. Using a process perspective, we pinpoint items within...... acquisition phases that relate to speed. In particular, we present the idea of time-bounded strategic windows in acquisitions consistent with the notion of kairòs, where opportunities appear and must be pursued at the right time for success to occur....

  1. Window shopping

    OpenAIRE

    Oz Shy

    2013-01-01

    The terms "window shopping" and "showrooming" refer to the activity in which potential buyers visit a brick-and-mortar store to examine a product but end up either not buying it or buying the product from an online retailer. This paper analyzes potential buyers who differ in their preference for after-sale service that is not offered by online retailers. For some buyers, making a trip to the brick-and-mortar store is costly; however, going to the store to examine the product has the advantage...

  2. Application of electron beam to industrial wastewater treatment

    International Nuclear Information System (INIS)

    Han, B.; Kim, D.K.; Boo, J.Y.; Kim, J.K.; Kim, Y.; Chung, W.; Choi, J.S.; Kang, H.J.; Pikaev, A.K.

    2001-01-01

    Global withdrawals of water to satisfy human demands have grown dramatically in this century. Between 1900 and 1995, water consumption increased by over six times, more than double the rate of population growth. This rapid growth in water demand is due to the increasing reliance on irrigation to achieve food security, the growth of industrial uses, and the increasing use per capita for domestic purposes. Given the seriousness of the situation and future risk of crises, there is an urgent need to develop the water efficient technologies including economical treatment methods of wastewater and polluted water. In the Central Research Institute of Samsung Heavy Industries (SHI), many industrial wastewater including leachate from landfill area, wastewater from papermill, dyeing complex, petrochemical processes, etc. are under investigation with EB irradiation. For the study of treating dyeing wastewater combined with conventional facilities, an EB pilot plant for treating 1,000m 3 /day of wastewater from 60,000m 3 /day of total dyeing wastewater has been constructed and operated in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from Papermill Company is also designed for S-paper Co. in Cheongwon City, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process. (author)

  3. Anaerobic treatment with biogas recovery of beverage industry waste water

    International Nuclear Information System (INIS)

    Cacciari, E.; Zanoni, G.

    1992-01-01

    This paper briefly describes the application, by a leading Italian non-alcoholic beverage firm, of an up-flow anaerobic sludge blanket process in the treatment of waste water deriving from the production and bottling of beverages. In addition to describing the key design, operation and performance characteristics of the treatment process, the paper focuses on the economic benefits being obtained through the use of the innovative expansive sludge bed anaerobic digestion system which has proven itself to be particularly suitable for the treatment of food and beverage industry liquid wastes. The system, which has already been operating, with good results, for six months, has shown itself to be capable of yielding overall COD removal efficiencies of up to 94.8% and of producing about 0.43 Ncubic meters of biogas per kg of removed COD

  4. Performance evaluation of effluent treatment plant for automobile industry

    Energy Technology Data Exchange (ETDEWEB)

    Ansari, Farid [Department of Applied Science and Humanities, PDM College of Engineering, Bahadurgarh (Haryana) (India); Pandey, Yashwant K. [School of Energy and Environmental Studies, Devi Ahilya Vishwavidyalaya, Indore (India); Kumar, P.; Pandey, Priyanka [Department of Environmental Science, Post Graduate College Ghazipur (IN

    2013-07-01

    The automobile industry’s wastewater not only contains high levels of suspended and total solids such as oil, grease, dyestuff, chromium, phosphate in washing products, and coloring, at various stages of manufacturing but also, a significant amount of dissolved organics, resulting in high BOD or COD loads. The study reveals the performance, evaluation and operational aspects of effluent treatment plant and its treatability, rather than the contamination status of the real property. The Results revealed that the treated effluent shows most of the parameters are within permissible limits of Central Pollution Control Board (CPCB), India and based on the site visits, discussion with operation peoples, evaluation of process design, treatment system, existing effluent discharge, results of sample analyzed and found that effluent treatment plant of automobile industry are under performance satisfactory.

  5. Industrial plant for electron beam flue gas treatment

    International Nuclear Information System (INIS)

    Chmielewski, A.G.; Iller, E.; Tyminnski, B.; Zimek, Z; Ostapczuk, A.; Licki, J.

    2001-01-01

    The electron beam flue gas treatment technology was invented many years ago. Research on the process has been carried out in Japan, USA, Germany and Poland. However, the recent fidings, based on the experiments performed at pilot plant at Electric Power Station Kaweczyn, led to developments which made process mature just at the dawn of the XXI century. The process is being implemented in the full industrial scale at Electric Power Station Pomorzany (Dolna Odra EPS Group). Other developments are reported in Japan and after Nagoya's pilot plant experiments, an industrial plant has been built in China and another one is constructed in Japan. There are remarkable differences in technological and design solutions applied in all these installations. Developments achieved at EPS Kaweczyn pilot plant and INCT laboratory unit were the basis for the project realized at EPS Pomorzan

  6. Thermophilic biological nitrogen removal in industrial wastewater treatment.

    Science.gov (United States)

    Lopez-Vazquez, C M; Kubare, M; Saroj, D P; Chikamba, C; Schwarz, J; Daims, H; Brdjanovic, D

    2014-01-01

    Nitrification is an integral part of biological nitrogen removal processes and usually the limiting step in wastewater treatment systems. Since nitrification is often considered not feasible at temperatures higher than 40 °C, warm industrial effluents (with operating temperatures higher than 40 °C) need to be cooled down prior to biological treatment, which increases the energy and operating costs of the plants for cooling purposes. This study describes the occurrence of thermophilic biological nitrogen removal activity (nitritation, nitratation, and denitrification) at a temperature as high as 50 °C in an activated sludge wastewater treatment plant treating wastewater from an oil refinery. Using a modified two-step nitrification-two-step denitrification mathematical model extended with the incorporation of double Arrhenius equations, the nitrification (nitrititation and nitratation) and denitrification activities were described including the cease in biomass activity at 55 °C. Fluorescence in situ hybridization (FISH) analyses revealed that Nitrosomonas halotolerant and obligatehalophilic and Nitrosomonas oligotropha (known ammonia-oxidizing organisms) and Nitrospira sublineage II (nitrite-oxidizing organism (NOB)) were observed using the FISH probes applied in this study. In particular, this is the first time that Nitrospira sublineage II, a moderatedly thermophilic NOB, is observed in an engineered full-scale (industrial) wastewater treatment system at temperatures as high as 50 °C. These observations suggest that thermophilic biological nitrogen removal can be attained in wastewater treatment systems, which may further contribute to the optimization of the biological nitrogen removal processes in wastewater treatment systems that treat warm wastewater streams.

  7. Parenthetical Windows

    DEFF Research Database (Denmark)

    Lemi, Esther; Triantafyllidis, Georgios

    2016-01-01

    artificial from natural stimuli and detects common and individual needs by measuring heart pulse and body temperature. The focal point here is light and how light affects human perception while at the same time the perception of sound and how gesture can provide the best possible cognition of actual needs...... light is a form that adapts natures’ properties and modifies the artificial environment as a stage direction, implying at the same time mood and modifying it in collaboration with sound. Having evaluated how this affects the body and human perception in this particular time that we experience nowadays......Parenthetical Window is a project that engages scientific research in human perception providing a platform for users to experience their own limits and needs in their individual circadian rhythm. The presentation focuses on a case study in a community of dancers where the individual needs in light...

  8. Evaluation of photocatalytic treatment of industrial wastewater using solar energy

    International Nuclear Information System (INIS)

    Restrepo, Gloria Maria; Rios, Luis A; Marin, Juan Miguel; Montoya, Juan Felipe; Velasquez, Jorge Armando

    2008-01-01

    Wastewater of a chemical industry was treated in a photocatalytic process, using a solar photo-reactor made of glass corrugated flat plates that had been set in cascade and using Titanium Dioxide (Degussa p-25) as photocatalyst that is supported on each one of them in film form. the influence of three variables in the decontamination efficiency were studied: amount of H 2 O 2 , volume of water and amount of dispersed TiO 2 , by means of the accomplishment of fifteen experiments carried out in discontinuous operation mode by a period of 5 hours for each test. The obtained results allow establishing that the FH is a viable technology of treatment like previous stage to a biological treatment since percentage of reduction in the DQO varies between 6 and 46% and was managed to reach a biodegradable effluent in all tests

  9. Biological and Irradiation Treatment of Mix Industrial Wastewater in Flood Mitigation Pond at Prai Industrial Zone

    International Nuclear Information System (INIS)

    Khomsaton Abu Bakar; Jamaliah Sharif; Selambakkanu, S.; Ming, T.M.; Natasha Isnin; Hasnul Nizam Osman; Khasmidatul Akma Mohd Khairul Azmi

    2014-01-01

    In this work, activated sludge process and E-Beam was used to treat mixed industrial waste water from mitigation pond A. The objectives of this study to analyze the effect of mix liquor volatile suspended solid (MLVSS) concentration on the properties of wastewater and duration of time taken to achieve steady stage condition for biological treatment. Besides that, effect of electron beam energy on the characteristic of wastewater after irradiation with electron beam machine EPS 3000 was studied as well. The result shows removal percentage of COD, suspended solid and color was linearly proportional with MLVSS. Maximum reduction values recorded for COD, suspended solid and color removal was 69.4, 73.0 and 43.7 % respectively with 3500 mg/l MLVSS at 48 h HRT. In irradiation treatment, significant reduction of COD was obtained with the increase of electron beam energy but the results for suspended solid and color was not favorable. (author)

  10. The application of ionising radiation in industrial wastewater treatment technology

    International Nuclear Information System (INIS)

    Kos, L.; Perkowski, J.; Ledakowicz, S.

    2003-01-01

    An attempt was made to apply radiation techniques in the treatment of industrial wastewater from a dairy, brewery and sugar factory. For degradation of pollutants present in the wastewater, the following methods were used: irradiation, irradiation combined with aeration, ozonation, and combined irradiation and ozonation. For all three types of wastewater, the best method among these listed above appeared to be the method of irradiation combined with ozonation. Most degradable was the wastewater produced in sugar factories, and the least biodegradable appeared to be dairy wastewater. Depending on the dose of ozone and radiation, a maximum 60% reduction of COD was obtained. No effect of the wastewater aeration on its degradation by radiation was found. Changes in the content of mineral compounds were observed in none of the cases. The process of biological treatment of wastewater was carried out in a low-loaded, wetted bed. Pretreatment of the wastewater had no significant effect on the improvement of the biological step operation. Some effect was observed only in the case of the wastewater coming from a sugar factory. For medium concentrated wastewater from food industry, it is not economically justified to apply the pretreatment with the use of ionising radiation. (orig.)

  11. 40 CFR 35.2125 - Treatment of wastewater from industrial users.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Treatment of wastewater from industrial... Treatment of wastewater from industrial users. (a) Grant assistance shall not be provided for a project... control or removal of pollutants in wastewater introduced into the treatment works by industrial users...

  12. Industrial treatment from distilleries vinasses in UASB reactors

    International Nuclear Information System (INIS)

    Lorenzo-Acosta, Yaniris; Doménech-López, Fidel; Eng-Sánchez, Felipe; Olmo, Oscar Almazán-del; Chanfón-Curbelo, Juana Ma.

    2015-01-01

    The anaerobic digestion in UASB reactors is well known since the 80´, at industrial scale, in Latin American countries, for the treatment of liquid wastes, including the ethanol vinasses. That´s the importance to present the equations used in the design and the results of the actual potentiality of a biogas plant, using as a case of study an, the vinasses treatment of a distillery of a capacity of 500 HL of ethanol per day. The flow sheet of the technology and an explanation of the stages are also shown. The results of the mass balance confirm that to treat the whole vinasses generated with a COD of 50 kg per cubic meter, to be converted in electric energy, it´s necessary to install two UASB reactors f 1160 cubic meters each , being the production potential of this technology of 12821 cubic meters of desulphurized biogas per day, 21796 kWh of electric energy, 4.33 t per day of dry mud and 716 cubic meters of vinasses with only 15 kg of COD per cubic meters, that could be used for ferti-irrigation of the cane fields, as an option to close the treatment cycle and waste disposal . All this drive to the conclusion that the anaerobic digestion of the distillery vinasses in UASB reactors as a primary treatment option, with the use of the treated vinasses for the ferti-irrigation of the cane fields to close the cycle make the ethanol production true ecofrienly. (author)

  13. Construction of Industrial Electron Beam Plant for Wastewater Treatment

    International Nuclear Information System (INIS)

    Han, B.; Kim, J.; Kim, Y.; Kim, S.; Lee, M.; Choi, J.; Ahn, S.; Makarov, I.E.; Ponomarev, A.V.

    2004-01-01

    A pilot plant for treating 1,000 m3/day of dyeing wastewater with e-beam has been constructed and operated since 1998 in Daegu, Korea together with the biological treatment facility. The wastewater from various stages of the existing purification process has been treated with electron beam in this plant, and it gave rise to elaborate the optimal technology of the electron beam treatment of wastewater with increased reliability at instant changes in the composition of wastewater. Installation of the e-beam pilot plant resulted in decolorizing and destructive oxidation of organic impurities in wastewater, appreciable to reduction of chemical reagent consumption, in reduction of the treatment time, and in increase in flow rate limit of existing facilities by 30-40%. Industrial plant for treating 10,000 m3/day, based upon the pilot experimental result, is under construction and will be finished by 2005. This project is supported by the International Atomic Energy Agency (IAEA) and Korean Government

  14. Wastewater Treatment of Stone Cutting Industries by Coagulation Process

    Directory of Open Access Journals (Sweden)

    Mohammad Fahiminia

    2013-09-01

    Full Text Available Background & Aims of the Study: The wastewater created as a result of stone cutting industries enters some pools for re-consumption so that its suspended solids settle by gravity. By taking to account the high volume of water and sludge, treatment of wastewater and removal of sludge cause many problems for stone cutting units. The objective of this study was to determine the quality of wastewater and to investigate the effects of coagulants on suspended solids removal efficiency from wastewater of some stone cutting industries (Qom, Iran. Materials & Methods: In this experimental study, the effects of different doses of coagulants including Alum, poly aluminum chloride, Polymer, Ferric chloride (Fecl3 and Lime on Turbidity, “total suspended solids” (TSS and “total solids” (TS removal were investigated by Jar Test. Removal efficiency of different coagulates was estimated. Results: The results indicated that lime in dose 100 PPM is the best coagulant for turbidity removal and the highest efficiency for TS removal is related to using Alum in dose 100 PPM. Conclusions: Considering the findings of this study, it can be concluded that using coagulants causes reduction in settling time and speeds up the return of water to the consumption cycle of stone cutting factories, and also increases turbidity removal efficiency.

  15. Wetlands for Industrial Wastewater Treatment at the Savannah River Site

    International Nuclear Information System (INIS)

    Gladden, J.B.

    2002-01-01

    The A-01 effluent outfall, which collects both normal daily process flow and stormwater runoff from a industrial park area, did not meet the South Carolina Department of Health and Environmental Control (SCDHEC) National Pollutant Discharge Elimination System (NPDES) permit limits for metals, toxicity, and total residual chlorine at the outfall sampling point. Copper was the constituent of primary concern and the effluent consistently failed to meet that NPDES limit. Installation of a constructed wetland system including a basin to manage stormwater surges was required to reduce the problematic constituent concentrations to below the NPDES permit limits before the effluent reaches the sampling point. Both bench-scale and on-site pilot scale physical models were constructed to refine and optimize the preliminary design as well as demonstrate the effectiveness of this approach prior to construction, which was completed in October 2000. The constructed treatment wetlands system has prov en its ability to treat industrial wastewaters containing metals with low O and M costs since there are no mechanical parts. With an anticipated life of over 50 years, this system is exceptionally cost effective

  16. Radiation Treatment for Recycling of Industrial Wastewater for Industrial Usage - Biological and Irradiation Treatment of Mix Industrial Wastewater in Flood Mitigation Pond at Prai Industrial Zones

    International Nuclear Information System (INIS)

    Bakar, Khomsaton Abu; Sharif, Jamaliah; Selambakkanu, Sarala; Ming, Ting Teo; Isnin, Natsha; Osman, Hasnul Nizam; Azmi, Khasmidatul Akma M.K; Dahlan, Khairul Zaman Hj Mohd; Yahya, Nasehir khan Em

    2012-01-01

    In this research, activated sludge system and E-Beam was used to treat mixed industrial waste water from mitigation pond A. The objectives are to study the effect of hydraulic retention time (HRT) in activated sludge and effect of absorbed dose, current and energy to the characteristic of mix industrial wastewater and Di(2-ethylhexyl) phthalate(DEHP) added in the wastewater. DEPH is a type of plasticizer and quantified by GC-MS. Microbe identification in activated sludge was also carried out in this study. At 48hrs HRT, percentage reduction for COD, color, suspended solid were 62.3%, 36.7% and 67.1% respectively. While at 24hrs HRT, COD, color and suspended solid were reduce by 26.0%, 14.9% and 61.3% respectively. Microbial analysis showed six bacteria present in the activated sludge based on 16SrRNA gene sequences. Mixed industrial wastewater was irradiated using electron beam at 1Mev, 5mA and 10mA in a batch system with 3, 6, 8,10 and 12kGy doses. COD, color and suspended solid reduced with the increasing of absorbed dose. Mixed industrial wastewater added with DEPH in the second batch was irradiated with dose up to 300kGy. Concentration of DEHP also reduced with increasing of dose and more effectively decreased in acidic and aerated condition. (author)

  17. Improving the Efficiency of a Coagulation-Flocculation Wastewater Treatment of the Semiconductor Industry through Zeta Potential Measurements

    Directory of Open Access Journals (Sweden)

    Eduardo Alberto López-Maldonado

    2014-01-01

    Full Text Available Efficiency of coagulation-flocculation process used for semiconductor wastewater treatment was improved by selecting suitable conditions (pH, polyelectrolyte type, and concentration through zeta potential measurements. Under this scenario the zeta potential, ζ, is the right parameter that allows studying and predicting the interactions at the molecular level between the contaminants in the wastewater and polyelectrolytes used for coagulation-flocculation. Additionally, this parameter is a key factor for assessing the efficiency of coagulation-flocculation processes based on the optimum dosages and windows for polyelectrolytes coagulation-flocculation effectiveness. In this paper, strategic pH variations allowed the prediction of the dosage of polyelectrolyte on wastewater from real electroplating baths, including the isoelectric point (IEP of the dispersions of water and commercial polyelectrolytes used in typical semiconductor industries. The results showed that there is a difference between polyelectrolyte demand required for the removal of suspended solids, turbidity, and organic matter from wastewater (23.4 mg/L and 67 mg/L, resp.. It was also concluded that the dose of polyelectrolytes and coagulation-flocculation window to achieve compliance with national and international regulations as EPA in USA and SEMARNAT in Mexico is influenced by the physicochemical characteristics of the dispersions and treatment conditions (pH and polyelectrolyte dosing strategy.

  18. Case study: centralized wastewater treatment plant at Rawang Integrated Industrial Park

    International Nuclear Information System (INIS)

    Ting Teo Ming; Khomsaton Abu Bakar; Zulkafli Ghazali; Khairul Zaman Mohd Dahlan

    2006-01-01

    Survey has been conducted at Rawang Integrated Industrial Park (RIIP) to investigate the possibility of setting up centralized industrial wastewater treatment plant. Rawang integrated industrial park is selected based on suggestion from department of environment. RIIP consists of about 150 industries with various type of activities operated in the area. Only 9 out of estimated 150 industries have individual wastewater treatment plant. The business activities of the 9 industries include food processing, textile, welding rods manufacturing, steel galvanizing and battery manufacturing. Wastewater generated by the industries are characterized by high oil and grease, cod, bod, organic matter, metal hydroxide and acidic. Besides that most of industries do the monitoring only once a month. This paper will also discuss the advantages of setting up of centralized industrial wastewater treatment plant to the government authorities, industries, people and environment. (Author)

  19. Treatment of industrial exhaust gases by a dielectric barrier discharge

    Science.gov (United States)

    Schmidt, Michael; Hołub, Marcin; Jõgi, Indrek; Sikk, Martin

    2016-08-01

    Volatile organic compounds (VOCs) in industrial exhaust gases were treated by a dielectric barrier discharge (DBD) operated with two different mobile power supplies. Together with the plasma source various gas diagnostics were used, namely fourier transform infrared (FTIR) spectroscopy, flame ionization detector (FID) and GC-MS. The analysis revealed that some exhaust gases consist of a rather complex mixture of hydrocarbons and inorganic compounds and also vary in pollutants concentration and flow rate. Thus, analysis of removal efficiencies and byproduct concentrations is more demanding than under laboratory conditions. This contribution presents the experimental apparatus used under the harsh conditions of industrial exhaust systems as well as the mobile power source used. Selected results obtained in a shale oil processing plant, a polymer concrete production facility and a yacht hull factory are discussed. In the case of total volatile organic compounds in oil processing units, up to 60% were removed at input energy of 21-37 J/L when the concentrations were below 500 mg/m3. In the yacht hull factory up to 74% of styrene and methanol were removed at specific input energies around 300 J/L. In the polymer concrete production site 195 ppm of styrene were decomposed with the consumption of 1.8 kJ/L. These results demonstrate the feasibility of plasma assisted methods for treatment of VOCs in the investigated production processes but additional analysis is needed to improve the energy efficiency. Contribution to the topical issue "6th Central European Symposium on Plasma Chemistry (CESPC-6)", edited by Nicolas Gherardi, Ester Marotta and Cristina Paradisi

  20. Treatment of wastewater from rubber industry in Malaysia ...

    African Journals Online (AJOL)

    Presently, Malaysia is the third largest rubber producer in the world, whereby the rubber industry is an economically and socially significant industry. Rubber industry consumes large volumes of water, uses chemicals and other utilities and produces enormous amounts of wastes and effluent. Discharge of untreated rubber ...

  1. MRI versus CT-based thrombolysis treatment within and beyond the 3 h time window after stroke onset: a cohort study.

    Science.gov (United States)

    Köhrmann, Martin; Jüttler, Eric; Fiebach, Jochen B; Huttner, Hagen B; Siebert, Stefan; Schwark, Christian; Ringleb, Peter A; Schellinger, Peter D; Hacke, Werner

    2006-08-01

    Thrombolytic treatment with recombinant tissue plasminogen activator (rtPA) is approved for use within 3 h after stroke onset. Thus only a small percentage of patients can benefit. Meta-analyses and more recent studies suggest a benefit for a subset of patients beyond 3 h. We assessed the safety and efficacy of an MRI-based selection protocol for stroke treatment within and beyond 3 h compared with standard CT-based treatment. We assessed clinical outcome and incidence of symptomatic intracerebral haemorrhage (ICH) in 400 consecutive patients treated with intravenous rtPA. Patients eligible for thrombolysis within 3 h were selected by CT or MRI and beyond 3 h only by MRI. 18 patients were excluded from analysis because of violation of that algorithm. The remaining 382 patients were divided into three groups: CT-based treatment within 3 h (n=209); MRI-based treatment within 3 h (n=103); and MRI-based treatment beyond 3 h (n=70). Patients in group 3 (MRI > 3 h) had a similar 90 day outcome to those in the other two groups (48% were independent in the CT < or = 3 h group, 51% in the MRI < or = 3 h group, and 56% in group 3), but without an increased risk for symptomatic ICH (9%, 1%, 6%) or mortality (21%, 13%, 11%). MRI-selected patients overall had a significantly lower risk than CT-selected patients for symptomatic ICH (3% vs 9%; p=0.013) and mortality (12% vs 21%; p=0.021). Time to treatment did not affect outcomes in univariate and multivariate analyses. Our data suggest that beyond 3 h and maybe even within 3 h, patient selection is more important than time to treatment for a good outcome. Furthermore, MRI-based thrombolysis, irrespective of the time window, shows an improved safety profile while being at least as effective as standard CT-based treatment within 3 h.

  2. Logistic paradigm for industrial solid waste treatment processes

    Directory of Open Access Journals (Sweden)

    Janusz Grabara

    2014-12-01

    Full Text Available Due to the fact that industrial waste are a growing problem, both economic and environmental as their number is increasing every year, it is important to take measures to correctly dealing wi th industrial waste. This article presents the descriptive model of logistics processes concerning the management of industrial waste. In this model the flow of waste begins in the place of production and ends at their disposal. The article presents the concept of logistics model in graphical form together with an analysis of individual processes and their linkages, and opportunities to improve flow of industrial waste streams. Furthermore, the model allows for justification of the relevance of use logistics and its processes for waste management

  3. Investigation on Industrial Waste Waters Reuse of Industrial Towns for Agricultural and Irrigation Uses (Case Study: Treatment Plant of Jahan Abad MeybodIndustrial Town)

    OpenAIRE

    Azra Dehghani firoozabady; hady Zarei MahmoodAbady; Mohammad Hassan Ehrampush

    2017-01-01

    Introduction: With attention to the existence numerous numbers of industrial towns and them volume of generated wastewater  and problems of shortage of water in the Yazd province, therfore the proper wastewater treatment and efficient management of waste water of industrial towns for reuse of them  is one of  the most important of program for reducing & saving in water consumption.  Hence, this study aimed to the feasibility of the reuse of waste water of industrial town o...

  4. Windows 10 simplified

    CERN Document Server

    McFedries, Paul

    2015-01-01

    Learn Windows 10 quickly and painlessly with this beginner's guide Windows 10 Simplified is your absolute beginner's guide to the ins and outs of Windows. Fully updated to cover Windows 10, this highly visual guide covers all the new features in addition to the basics, giving you a one-stop resource for complete Windows 10 mastery. Every page features step-by-step screen shots and plain-English instructions that walk you through everything you need to know, no matter how new you are to Windows. You'll master the basics as you learn how to navigate the user interface, work with files, create

  5. Windows 10 for dummies

    CERN Document Server

    Rathbone, Andy

    2015-01-01

    The fast and easy way to get up and running with Windows 10 Windows 10 For Dummies covers the latest version of Windows and gets you up and running with the changes and new features you'll find in this updated operating system. Packed with time-saving tips to help you get the most out of the software, this helpful Windows 10 guide shows you how to manage Windows tasks like navigating the interface with a mouse or touchscreen, connecting to the web, and troubleshooting problems and making quick fixes. Assuming no prior knowledge of the software, Windows 10 For Dummies addresses the updates to

  6. Total Body Irradiation Mitigates Inflammation and Extends the Therapeutic Time Window for Anti-Ricin Antibody Treatment against Pulmonary Ricinosis in Mice

    Directory of Open Access Journals (Sweden)

    Yoav Gal

    2017-09-01

    Full Text Available Ricin, a highly toxic plant-derived toxin, is considered a potential weapon in biowarfare and bioterrorism due to its pronounced toxicity, high availability, and ease of preparation. Pulmonary exposure to ricin results in the generation of an acute edematous inflammation followed by respiratory insufficiency and death. Massive neutrophil recruitment to the lungs may contribute significantly to ricin-mediated morbidity. In this study, total body irradiation (TBI served as a non-pharmacological tool to decrease the potential neutrophil-induced lung injury. TBI significantly postponed the time to death of intranasally ricin-intoxicated mice, given that leukopenia remained stable following intoxication. This increase in time to death coincided with a significant reduction in pro-inflammatory marker levels, and led to marked extension of the therapeutic time window for anti-ricin antibody treatment.

  7. Can multivariable risk-benefit profiling be used to select treatment-favorable patients for thrombolysis in stroke in the 3- to 6-hour time window?

    Science.gov (United States)

    Kent, David M; Selker, Harry P; Ruthazer, Robin; Bluhmki, Erich; Hacke, Werner

    2006-12-01

    The Stroke-Thrombolytic Predictive Instrument (Stroke-TPI) uses multivariate equations to predict outcomes with and without thrombolysis. We sought to examine whether such a multivariate predictive instrument might be useful in selecting patients with a favorable risk-benefit treatment profile for therapy after 3 hours. We explored outcomes in patients from 5 major randomized clinical trials testing intravenous recombinant tissue plasminogen activator (rt-PA) classified by the Stroke-TPI as "treatment-favorable" or "treatment-unfavorable." We used iterative bootstrap re-sampling to estimate how such a model would perform on independent test data. Among patients treated within the 3- to 6-hour window, 67% of patients were classified by Stroke-TPI predicted outcomes as "treatment-favorable" and 33% were classified as "treatment-unfavorable." Outcomes in the treatment-favorable group demonstrated benefit for thrombolysis (modified Rankin Scale score < or =1: 44.0% with rt-PA versus 34.2 with placebo, P=0.005), whereas harm was demonstrated in the treatment-unfavorable group (modified Rankin Scale score < or =1: 31.3% with rt-PA versus 38.3% with placebo; P=0.004). Bootstrap resampling with complete cross-validation showed that the absolute margin of benefit in the treatment-favorable group diminished on average by 36% between derivation and independent validation sets, but still represented a significant tripling of improvement in benefit compared with conventional inclusion criteria (5.2% [interquartile range, 1.7% to 8.6%] versus 1.8% [interquartile range, -0.5 to 4.1], P<0.0001). Such multivariable risk-benefit profiling may be useful in the selection of acute stroke patients for rt-PA therapy even more than 3 hours after symptom onset. Prospective testing is indicated.

  8. The situation of generation, treatment and supervision of common industrial solid wastes in China

    Science.gov (United States)

    Xu, Shumin

    2018-02-01

    From the point of view of location and sources, an analysis is done for the generation, utilization, treatment and storage of common industrial solid wastes in China. Based on the current situations, suggestions are given to the treatment and supervision polices in China for the utilization of common industrial solid wastes.

  9. “Appropriate Treatment” and Therapeutic Window in Spasticity Treatment with IncobotulinumtoxinA: From 100 to 1000 Units

    OpenAIRE

    Giancarlo Ianieri; Riccardo Marvulli; Giulia Alessia Gallo; Pietro Fiore; Marisa Megna

    2018-01-01

    Many neurological diseases (ischemic and hemorrhagic stroke, multiple sclerosis, infant cerebral palsy, spinal cord injuries, traumatic brain injury, and other cerebrovascular disorders) may cause muscle spasticity. Different therapeutic strategies have been proposed for the treatment of spasticity. One of the major treatments for tone modulation is botulinum toxin type A (BTX-A), performed in addition to other rehabilitation strategies based on individualized multidisciplinary programs aimed...

  10. Recent Progress in TiO2-Mediated Solar Photocatalysis for Industrial Wastewater Treatment

    OpenAIRE

    Tong Zhang; Xiaoguang Wang; Xiwang Zhang

    2014-01-01

    The current paper reviews the application of TiO2-mediated solar photocatalysis for industrial wastewater treatment, starting with a brief introduction on the background of industrial wastewater and the development of wastewater treatment processes, especially advanced oxidation processes (AOPs). We, then, discuss the application of solar TiO2 photocatalysis in treating different kinds of industrial wastewater, such as paper mill wastewater, textile wastewater, and olive mill wastewater. In t...

  11. Use of nanofiltration membrane technology for ceramic industry wastewater treatment

    Directory of Open Access Journals (Sweden)

    Moliner-Salvador, R.

    2012-04-01

    Full Text Available A study has been undertaken of an advanced wastewater treatment approach using polymer nanofiltration membranes, in an attempt to obtain water of sufficient quality to allow it to be reused in the same production process or, alternatively, to be discharged without any problems. The study has initially focused on the removal of organic matter (reduction of COD and the most representative ions present in the wastewater, such as Na+, Mg2+, Cl- y SO42-. In a first part of the study, with a view to optimising the experimental phase, a simulation has been performed of the nanofiltration process using the NanoFlux software. Among other things, the simulation allows the most suitable membranes to be selected as a function of the permeate flow rate and desired level of retention in the substances to be removed. The subsequent experimentation was carried out in a laboratory tangential filtration system that works with flat membranes. It was found that retention values of about 90% were obtained for the studied substances, with a good permeate flow rate, using low operating pressures. These results demonstrate the feasibility of the studied technology and its potential as a treatment for improving ceramic industry wastewater quality.

    Este estudio ha sido emprendido con el fin de acercar la nanofiltración a través de membranas poliméricas al tratamiento de las aguas residuales industriales de la industria cerámica, esperando obtener un agua con la suficiente calidad como para ser reutilizada en el propio proceso productivo o, alternativamente, poder verterla. El estudio se ha centrado en la eliminación de materia orgánica (reducción de D.Q.O y algunos iones presentes en las aguas residuales, tales como Na+, Mg2+, Cl- y SO42-. En primer lugar, se ha realizado una simulación del proceso de nanofiltración usando el software Nano

  12. Comparison of Fenton process and adsorption method for treatment of industrial container and drum cleaning industry wastewater.

    Science.gov (United States)

    Güneş, Elçin; Çifçi, Deniz İzlen; Çelik, Suna Özden

    2018-04-01

    The present study aims to explore the characterization of industrial container and drum cleaning (ICDC) industry wastewater and treatment alternatives of this wastewater using Fenton and adsorption processes. Wastewater derived from ICDC industry is usually treated by chemical coagulation and biological treatment in Turkey and then discharged in a centralized wastewater treatment facility. It is required that the wastewater COD is below 1500 mg/L to treat in a centralized wastewater treatment facility. The wastewater samples were characterized for parameters of pH, conductivity, COD, BOD 5 , TSS, NH 3 -N, TN, TOC, TP, Cd, Cr, Cu, Fe, Ni, Pb, Zn, and Hg. Initial COD values were in the range of 11,300-14,200 mg/L. The optimum conditions for Fenton treatment were 35-40 g/L for H 2 O 2 , 2-5 g/L for Fe 2+ , and 13-36 for H 2 O 2 /Fe 2+ molar ratio. The optimum conditions of PAC doses and contact times in adsorption studies were 20-30 g/L and 5-12 h, respectively. Removal efficiencies of characterized parameters for the three samples were compared for both Fenton and adsorption processes under optimum conditions. The results suggest that these wastewaters are suitable for discharge to a centralized wastewater treatment plant.

  13. Schematic Window Methodology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The aim of this IRAD is to produce a generic launch window analyzer (SWM) that allows for large-scale rapid analysis of a launch window and orbit design trade space....

  14. One step forward or more window-dressing? A legal analysis of the recent CSR Initiatives in the Garment Industry in Bangladesh

    NARCIS (Netherlands)

    ter Haar, B.; Keune, M.

    2014-01-01

    The Bangladesh ready-made garment industry has recently been affected by a number of terrible accidents, with the collapse of the Rana Plaza on 24 April 2013 as the deadliest garment-factory accident ever known. Under the pressure of renewed attention to the role and responsibilities of

  15. Melon husk-based activated carbon for treatment of industrial ...

    African Journals Online (AJOL)

    The adsorption of organic contaminants from industrial effluent using melon husk activated carbon has been investigated. Melon husk was carbonized at 450oC for 20 minutes and activated with sulphuric acid to produce granular activated carbon (AC). The fixed carbon increased with increase in concentration of activating ...

  16. Treatment of some Textile Industrial Effluents using Dry Corn Stalk ...

    African Journals Online (AJOL)

    Corn stalk ground to various mesh sizes was used to treat textile effluents obtained from three different industries. These effluents were first pretreated with alum and then charcoal; passing the water through a column, (20cm long and 5cm diameter) containing the ground corn stalk of size diameters of 300mm, 355mm ...

  17. Industrial wastewater treatment using natural material as adsorbent ...

    African Journals Online (AJOL)

    Attempts were made to compare the adsorption efficiency of coconut shell-based granular activated carbon with the adsorption efficiency of commercial carbon, Calgon carbon F-300, with respect to adsorption of organic matter from a beverage industrial wastewater. Freundlich adsorption isotherm was used to analyze the ...

  18. Wilson?s disease presenting as rapid eye movement sleep behavior disorder: a possible window to early treatment

    Directory of Open Access Journals (Sweden)

    Gotthard G. Tribl

    2014-09-01

    Full Text Available Objective To describe characteristics of REM sleep behavior disorder in Wilson’s disease. Method Questionnaire-based interviews (patients and relatives, neurological examinations, two-week prospective dream-diary, video-polysomnography, transcranial sonography, MRI. Results Four Wilson’s disease cases with REM sleep behavior disorder were described; three had REM sleep behavior disorder as initial symptom. All showed mesencephalic tegmental/tectal sonographic hyperechogenicities and two presented ponto-mesencephalic tegmental MRI hyperintensities. Conclusion This first description of REM sleep behavior disorder in Wilson’s disease in literature documents REM sleep behavior disorder as a possible presenting symptom of Wilson’s disease and adds further evidence to the parallelism of Parkinson’s disease and Wilson’s disease in phenotype and brainstem topography, which ought to be further studied. REM sleep behavior disorder has prognostic relevance for neurodegeneration in α-synucleinopathies. In Wilson’s disease, usefulness of early diagnosis and treatment are already well established. REM sleep behavior disorder in Wilson’s disease offers a possible theoretical model for potential early treatment in this extrapyramidal and brainstem paradigm syndrome, previewing the possibility of neuroprotective treatment for REM sleep behavior disorder in “pre-clinical” Parkinson’s disease.

  19. Pengaruh Window Level Dan Window Width Pada Lung Window Dan Mediastinum Window Pada Kualitas Citra CT-Scan Thorax

    OpenAIRE

    Gaol, Syahnaro Lumban

    2015-01-01

    This Research of image CT-SCAN thorax with influence of window level and window width, to obtain, get value of window level and optimal window width lung window and mediastinum window, so that get image of CT-SCAN thorax which with image quality. Image of CT-SCAN thorax obtained for mediastinum window use window width 350, 400, 450, 500 HU. And Window level 50,100,150 HU. While for lung window use window width 1000,1100 HU. The window level - 500-,600,-700,-800,-900,-1000 HU, by three observe...

  20. Windows for Intel Macs

    CERN Document Server

    Ogasawara, Todd

    2008-01-01

    Even the most devoted Mac OS X user may need to use Windows XP, or may just be curious about XP and its applications. This Short Cut is a concise guide for OS X users who need to quickly get comfortable and become productive with Windows XP basics on their Macs. It covers: Security Networking ApplicationsMac users can easily install and use Windows thanks to Boot Camp and Parallels Desktop for Mac. Boot Camp lets an Intel-based Mac install and boot Windows XP on its own hard drive partition. Parallels Desktop for Mac uses virtualization technology to run Windows XP (or other operating systems

  1. Windows® Internals

    CERN Document Server

    Russinovich, Mark E; Ionescu, Alex

    2009-01-01

    See how the core components of the Windows operating system work behind the scenes-guided by a team of internationally renowned internals experts. Fully updated for Windows Server 2008 and Windows Vista, this classic guide delivers key architectural insights on system design, debugging, performance, and support-along with hands-on experiments to experience Windows internal behavior firsthand.Delve inside Windows architecture and internals:Understand how the core system and management mechanisms work-from the object manager to services to the registryExplore internal system data structures usin

  2. [Extrapancreatic effects of GLP-1 receptor agonists: an open window towards new treatment goals in type 2 diabetes].

    Science.gov (United States)

    Salvador, Javier; Andrada, Patricia

    2014-09-01

    The wide ubiquity of GLP-1 receptors in the body has stimulated the search for different extrapancreatic actions of GLP-1 and its receptor agonists. Thus, severe cardioprotective effects directed on myocardial ischaemia and dysfunction as well as diverse antiaterogenic actions have been reported. Also, native and GLP-1 receptor agonists have demonstrated significant beneficial effects on liver steatosis and fibrosis and on neuronal protection in experimental models of Alzheimer, and Parkinson's disease as well as on cerebral ischaemia. Recent evidences suggest that these drugs may also be useful for prevention and treatment of diabetic retinopathy, nephropathy and peripheral neuropathy. Good results have also been reported in psoriasis. Despite we still need confirmation that these promising effects can be applied to clinical practice, they offer new interesting perspectives for treatment of type 2 diabetes associated complications and give to GLP-1 receptor agonists an even more integral position in diabetes therapy. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

  3. Advanced energy efficient windows

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund

    2007-01-01

    energy savings. In terms of energy, windows occupy a special position compared with other thermal envelope structures due to their many functions: 1) windows let daylight into the building and provide occupants with visual contact with their surroundings 2) windows protect against the outdoor climate 3......) windows transmit solar energy that may contribute to a reduction of energy consumption, but which may also lead to unpleasant overheating. In the following paragraphs the current use of windows is reviewed with an emphasis on energy, while special products like solar protection glazing and security......Windows should be paid special attention as they contribute a significant part of the total heat-loss coefficient of the building. Contrary to other parts of the thermal envelope the windows are not only heat loosers, but may gain heat in the day-time. Therefore there are possibilities for large...

  4. Comparative studies of utilization of industrial electron accelerators and adsorption with activated carbon for industrial effluent treatment

    International Nuclear Information System (INIS)

    Sampa, Maria Helena de O.; Rela, Paulo R.; Duarte, Celina Lopes; Las Casas, Alexandre; Mori, Manoel Nunes; Omi, Nelson M.

    2005-01-01

    A technical and economical feasibility study was performed comparing the use electron beam and activated charcoal for treatment of industrial wastewater. In this study was used synthetic solutions, prepared in laboratory with organic compounds standards, where the composition was focused on the critical organic contaminants usually presented in wastewater from petrochemical industry. For the sample irradiation was used an industrial electron beam from Radiation Dynamics Inc. 1.5 MeV - 37.5 kW setup in IPEN. The doses ranged from 5 kGy to 100 kGy. A common granulated activated charcoal in a fixed-bed absorber glass column was used to study the pollutants absorption performance. The results show that if the adequate irradiation dose was delivered to the organic pollutant, it is possible to conclude for the studied compounds that the Electron Beam Process is, in aspect of organic removal efficiency, similar to the activated carbon process. (author)

  5. Industrialization

    African Journals Online (AJOL)

    Lucy

    importantly exploiting cheap labour for industrial purposes from the native population. 13 . During the colonial era manufacturing in the continent was generally at the handicraft and small scale levels. In some colonies this was supplemented by some relatively complex industries producing mainly for export, but also ...

  6. Enzymatic treatment for preventing biofilm formation in the paper industry.

    Science.gov (United States)

    Torres, Claudia Esperanza; Lenon, Giles; Craperi, Delphine; Wilting, Reinhard; Blanco, Angeles

    2011-10-01

    Microbiological control programmes at industrial level should aim at reducing both the detrimental effects of microorganisms on the process and the environmental impact associated to the use of biocides as microbiological control products. To achieve this target, new efficient and environmentally friendly products are required. In this paper, 17 non-specific, commercial enzymatic mixtures were tested to assess their efficacy for biofilm prevention and control at laboratory and pilot plant scale. Pectin methylesterase, an enzyme found in the formulation of two of the mixtures tested, was identified as an active compound able to reduce biofilm formation by 71% compared to control tests.

  7. The problem of slurries of industrial wastes water treatments; Problematica de los lodos procedentes del tratamiento de las aguas residuales de la actividad industrial

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Frutos, J.L. [Tecnologias del Medio Ambiente, Universidad del Pais Vasco (Spain)

    1995-07-01

    The water treatment is not a problem today. The major problem are the slurries and fungi produced by the industrial waste water treatment. This article explains the different utilizations and the main applications of the water in the industrial process. The different treatments (thermal inertization sanitary landfills, etc) are presented.

  8. High Power Coax Window

    International Nuclear Information System (INIS)

    Neubauer, M.L.; Dudas, A.; Sah, R.; Elliott, T.S.; Rimmer, R.A.; Stirbet, M.

    2010-01-01

    A superconducting RF (SRF) power coupler capable of handling 500 kW CW RF power is required for present and future storage rings and linacs. There are over 35 coupler designs for SRF cavities ranging in frequency from 325 to 1500 MHz. Coupler windows vary from cylinders to cones to disks, and RF power couplers are limited by the ability of ceramic windows to withstand the stresses due to heating and mechanical flexure. We propose a novel robust co-axial SRF coupler design which uses compressed window technology. This technology will allow the use of highly thermally conductive materials for cryogenic windows. Using compressed window techniques on disk co-axial windows will make significant improvements in the power handling of SRF couplers. We present the bench test results of two window assemblies back to back, as well as individual window VSWR in EIA3.125 coax. A vacuum test assembly was made and the windows baked out at 155C. The processes used to build windows is scalable to larger diameter coax and to higher power levels.

  9. NPDES Permit for Crow Municipal Rural & Industrial Pilot Water Treatment Plant in Montana

    Science.gov (United States)

    Under NPDES permit MT-0031827, the Crow Indian Tribe is authorized to discharge from the Crow Municipal Rural & Industrial (MR&I) Pilot Water Treatment Plant in Bighorn County, Montana to the Bighorn River.

  10. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  11. Industrialization

    OpenAIRE

    Blundel, Richard

    2016-01-01

    Industrialization, the historical development that saw cheesemaking transformed from a largely craft-based or artisanal activity, often located on a dairy farm, to a production process that, for the most part, takes place in large ‘cheese factories’ or creameries [See ARTISANAL]. The principal features of modern industrialized cheesemaking, which set it apart from traditional approaches include: high production volumes; sourcing of milk from multiple dairy herds; pasteurization and re-balanci...

  12. Effects of reactive filters based on modified zeolite in dairy industry wastewater treatment process

    OpenAIRE

    Kolaković, Srđan; Stefanović, Dragoslav; Milićević, Dragan; Trajković, Slaviša; Milenković, Slobodan; Kolaković, Slobodan S.; Anđelković, Ljiljana

    2013-01-01

    Application of adsorbents based on organo-zeolites has certain advantages over conventional methods applied in food industry wastewater treatment process. The case study presented in this paper examines the possibilities and effects of treatment of dairy industry wastewater by using adsorbents based on organo-zeolites. The obtained results indicate favorable filtration properties of organo-zeolite, their high level of adsorption of organic matter and nitrat...

  13. Anaerobic treatment with UASB reactor in paper industry

    International Nuclear Information System (INIS)

    Dolcetti, G.; Grandi, A.; Chiellino, G.

    1993-01-01

    This case history, study describes the technical and economical benefits obtained with the application of UASB waste effluent treatment technology at an Italian paper mill. Italian users of the Biopaq-UASB methods which incorporates an innovative biogas recovery system, can take advantage of the special state subsidies available for energy-saving plants

  14. The Treatment of Sludge from the Rubber Processing Industry with ...

    African Journals Online (AJOL)

    ... readily available, cheap and easy to handle, more biodegradable, therefore more environmentally friendly. The use of the coagulant for the treatment of sludge and indeed where coagulation and flocculation is desirous can be so recommended. Keywords: Biodegradable, Chitosan, Exoskeleton, Pollution, Sludge,.

  15. Dispersed droplet dynamics during produced water treatment in oil industry

    NARCIS (Netherlands)

    van Eijkeren, D.F.

    2016-01-01

    For Lagrangian particle tracking applied to swirling flow produced water treatment the influence of the history force is investigated. In the expression for the history force an existing Reynolds number dependent kernel is adapted and validated for a range of experimental data for settling spheres.

  16. Windows 8 secrets

    CERN Document Server

    Thurrott, Paul

    2012-01-01

    Tips, tricks, treats, and secrets revealed on Windows 8 Microsoft is introducing a major new release of its Windows operating system, Windows 8, and what better way to learn all its ins and outs than from two internationally recognized Windows experts and Microsoft insiders, authors Paul Thurrott and Rafael Rivera? They cut through the hype to get at useful information you'll not find anywhere else, including what role this new OS plays in a mobile and tablet world. Regardless of your level of knowledge, you'll discover little-known facts about how things work, what's new and different, and h

  17. Programming Windows Azure

    CERN Document Server

    Krishnan, Sriram

    2010-01-01

    Learn the nuts and bolts of cloud computing with Windows Azure, Microsoft's new Internet services platform. Written by a key member of the product development team, this book shows you how to build, deploy, host, and manage applications using Windows Azure's programming model and essential storage services. Chapters in Programming Windows Azure are organized to reflect the platform's buffet of services. The book's first half focuses on how to write and host application code on Windows Azure, while the second half explains all of the options you have for storing and accessing data on the plat

  18. Windows Powershell Pocket Reference

    CERN Document Server

    Holmes, Lee

    2009-01-01

    This portable reference to Windows PowerShell summarizes both the command shell and scripting language, and provides a concise reference to the major tasks that make PowerShell so successful. Written by Microsoft PowerShell team member Lee Holmes, and excerpted from his Windows PowerShell Cookbook, Windows PowerShell Pocket Reference offers up-to-date coverage of PowerShell's 1.0 release. It's an ideal on-the-job tool for Windows administrators who don't have time to plow through huge books or search online.

  19. Beginning Windows 8

    CERN Document Server

    Halsey, Mike

    2012-01-01

    Windows 8 has been described by Microsoft as its 'boldest' Windows release ever. Beginning Windows 8 takes you through the new features and helps you get more out of the familiar to reveal the possibilities for this amazing new operating system. You will learn, with non-technical language used throughout, how to get up and running in the new Windows interface, minimize downtime, maximize productivity, and harness the features you never knew existed to take control of your computer and enjoy the peace of mind and excitement that comes with it. From tips and tweaks to easy-to-follow guides and d

  20. Mastering Windows 7 Deployment

    CERN Document Server

    Finn, Aidan; van Surksum, Kenneth

    2011-01-01

    Get professional-level instruction on Windows 7 deployment tools Enterprise-level operating system deployment is challenging and requires knowledge of specific tools. It is expected that Windows 7 will be extensively deployed in businesses worldwide. This comprehensive Sybex guide provides thorough coverage of the Microsoft deployment tools that were specifically created for Windows 7, preparing system administrators, MIS professionals, and corporate programmers to tackle the task effectively.Companies worldwide are expected to deploy Windows 7 as their enterprise operating system; system admi

  1. [EFFECTIVENESS OF BONE GRAFTING THROUGH WINDOWING AT FEMORAL HEAD-NECK JUNCTION FOR TREATMENT OF OSTEONECROSIS WITH SEGMENTAL COLLAPSE OF FEMORAL HEAD].

    Science.gov (United States)

    Zuo, Wei; Sun, Wei; Gao, Fuqiang; Li, Zirong; Wang, Bailiang; Shi, Zhencai

    2016-04-01

    To analyze the effectiveness of bone grafting through windowing at the femoral head-neck junction for the treatment of osteonecrosis with the segmental collapse of the femoral head. The clinical data were retrospectively analyzed from 106 patients (131 hips) with osteonecrosis with the segmental collapse of the femoral head who underwent bone grafting through windowing at the femoral head-neck junction between March 2011 and December 2013. There were 78 males and 28 females, with an average age of 31.3 years (range, 17-43 years). The body mass index ranged from 16.5 to 36.5 (mean, 24.2). There were 53 cases of corticosteroid-induced osteonecrosis of the femoral head (ONFH), 18 cases of alcohol-induced ONFH, and 35 cases of idiopathic ONFH. According to Association Research Circulation Osseous (ARCO) classification system, 105 hips were rated as stage IIIa, and 26 hips as stage IIIb; according to the China-Japan Friendship Hospital (CJFH) classification system, 41 hips were classified as C+L1 type, 13 hips as L2 type, and 77 hips as L3 type. Harris score was used for the effectiveness evaluation. The clinical failure cases were defined as patients who need total hip arthroplasty, or had a Harris score of less than 70 points. The Cox risk model analysis and Kaplan-Meier survival curves were used for multivariate analysis and univariate analysis. The average follow-up period was 27.9 months (range, 4-51 months). Solid fusions of bone graft were observed at 1.0-1.5 years after operation. The Harris score at last follow-up was 81.41 ±11.93, showing significant difference when compared with preoperative score (63.24 ± 9.98) (t = 13.710, P = 0.000). The results were excellent in 5 hips, good in 41 hips, fair in 57 hips, and poor in 28 hips, with an excellent and good rate of 35.1%. Thirty-three hips were classified as clinical failure. A progressive collapse of the femoral head was observed in 22 hips. The single factor analysis showed that preoperative ARCO stage

  2. Removal of microbial multi-species biofilms from the paper industry by enzymatic treatments.

    Science.gov (United States)

    Marcato-Romain, C E; Pechaud, Y; Paul, E; Girbal-Neuhauser, E; Dossat-Létisse, V

    2012-01-01

    This study aimed to characterize biofilms from the paper industry and evaluate the effectiveness of enzymatic treatments in reducing them. The extracellular polymeric substances (EPS) extracted from six industrial biofilms were studied. EPS were mainly proteins, the protein to polysaccharide ratio ranging from 1.3 to 8.6 depending on where the sampling point was situated in the paper making process. Eight hydrolytic enzymes were screened on a 24-h multi-species biofilm. The enzymes were tested at various concentrations and contact durations. Glycosidases and lipases were inefficient or only slightly efficient for biofilm reduction, while proteases were more efficient: after treatment for 24 h with pepsin, Alcalase® or Savinase®, the removal exceeded 80%. Savinase® appeared to be the most adequate for industrial conditions and was tested on an industrial biofilm sample. This enzyme led to a significant release of proteins from the EPS matrix, indicating its potential efficiency on an industrial scale.

  3. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  4. Treatment of Municipal and Industrial Waste by Radiation Processing

    International Nuclear Information System (INIS)

    Abdelaziz, M.E.

    1999-01-01

    In recent years the effort in science and technology is shifting from conventional technologies preventing the pollution of air, water and soil, towards processing by gamma or by electron beam (EB) irradiation in order to prevent pollution, rather than curing the problems caused by production processes, which are not optimized with regard to pollution control. Radiation processing may help to improve the environmental situation in two aspects : It provides alternatives to conventional technologies for the cleaning of air, flue gases and water,...etc, and it also helps to realize clean processes for preventing pollution in the first place. This paper will outline the basic principles of radiation processing for waste streams of environmental relevance, will summarize the state-of -the-art in environmental applications of radiation processing to show both the advantages and the limitations of the radiation processing of waste streams, and to highlight the environmental and economic benefits of clean processes made possible by radiation processing applied to municipal and industrial waste. Reference is made to gamma and EB radiation sources, and description of new technologies is presented

  5. Sediment remediation treatment techniques for the Venice industrial canals

    Energy Technology Data Exchange (ETDEWEB)

    Pippa, R.; Scanferla, P.; Cammarata, F.; Zampieri, L.; Carlon, C. [Consorzio Venezia Ricerche (Italy); Pavoni, B. [Ca' Foscari University of Venice (Italy). Dept. of Environmental Sciences; Pannocchia, G. [Venezia Technologie SpA, Venice (Italy); Hreglich, S. [Stazione Sperimentale del Vetro, Venice (Italy); Avezzu, F. [Depuracque Impianti srl, Venice (Italy)

    2003-07-01

    The main objective of SeRTech project (Sediment Remediation Technologies) is to develop an integrated cost-effective treatment system to address heterogeneous contamination and matrixes, such as those of Venice lagoon dredged materials. Seven treatment techniques, selected over a large array, have been tested: Thermal Desorption. A preliminary set of isothermal treatments at different temperatures was performed to evaluated the losses of organic and the most volatile metals (such as Pb and As). An almost full volatilisation of organic compounds was observed at temperatures ranging between 200 and 300 C. Chemical stabilization-solidification. Depuracque Impianti srl process uses innovative patented additives (polimers and superplasticizers) to immobilize heavy metals into cement pellets. Solvent extraction. Organic contaminants such as PAHs and PCBs were extracted from sediments by using ethyl acetate. The results showed that solvent extraction obtained high efficiency in removal of PAHs and other organic contaminants. Immobilization of heavy metals employing sulfate-reducing bacteria. High Gradient Magnetic Separation (HGMS). Sulfate reducing bacteria (SBR) produce an iron sulfide containing biomass with a high capability to adsorbe hevy metals and some organic compounds. This biomass can be separated through a high gradient magnetic field removing a substantial fraction of contaminants. Vitrification. Sediment was mixed with other inorganic wastes (glass cullet, feldsphatic tailings) and low amounts of row material to obtain an inert glass, which in turn can be recycled into other useful products, for example glass fibres, foam glass and glass ceramics. Phytoremediation. Phragmites australis (Cav.), Trin; Juncus Iacustrus, Arthrocnmemum fruticosum, Spartina maritima, Helianthus annuus L., Zea mais L., Brassica napus L., Brassica juncea L. have been selected to verify limit and efficiency of phytoextraction for heavy metals (Zn, Pb, Hg, Cd, As, Ni). Not only

  6. SU-F-T-373: Monte Carlo Versus Pencil Beam Dose Calculation for Spine SBRT Treatments Using HybridARC and Sliding Windows IMRT

    International Nuclear Information System (INIS)

    Venencia, C; Pino, M; Caussa, L; Garrigo, E; Molineu, A

    2016-01-01

    Purpose: The purpose of this work was to quantify the dosimetric impact of Monte Carlo (MC) dose calculation algorithm compared to Pencil Beam (PB) on Spine SBRT with HybridARC (HA) and sliding windows IMRT (dMLC) treatment modality. Methods: A 6MV beam (1000MU/min) produced by a Novalis TX (BrainLAB-Varian) equipped with HDMLC was used. HA uses 1 arc plus 8 IMRT beams (arc weight between 60–40%) and dIMRT 15 beams. Plans were calculated using iPlan v.4.5.3 (BrainLAB) and the treatment dose prescription was 27Gy in 3 fractions. Dose calculation was done by PB (4mm spatial resolution) with heterogeneity correction and MC dose to water (4mm spatial resolution and 4% mean variance). PTV and spinal cord dose comparison were done. Study was done on 12 patients. IROC Spine Phantom was used to validate HA and quantify dose variation using PB and MC algorithm. Results: The difference between PB and MC for PTV D98%, D95%, Dmean, D2% were 2.6% [−5.1, 6.8], 0.1% [−4.2, 5.4], 0.9% [−1.5, 3.8] and 2.4% [−0.5, 8.3]. The difference between PB and MC for spinal cord Dmax, D1.2cc and D0.35cc were 5.3% [−6.4, 18.4], 9% [−7.0, 17.0] and 7.6% [−0.6, 14.8] respectively. IROC spine phantom shows PTV TLD dose variation of 0.98% for PB and 1.01% for MC. Axial and sagittal film plane gamma index (5%-3mm) was 95% and 97% for PB and 95% and 99% for MC. Conclusion: PB slightly underestimates the dose for the PTV. For the spinal cord PB underestimates the dose and dose differences could be as high as 18% which could have unexpected clinical impact. CI shows no variation between PB and MC for both treatment modalities Treatment modalities have no impact with the dose calculation algorithms used. Following the IROC pass-fail criteria, treatment acceptance requirement was fulfilled for PB and MC.

  7. Industry

    OpenAIRE

    Schmidt-Belz, B.; Mohamad, Y.; Velasco, C.A.

    2009-01-01

    Industry plays a key role in the path towards eInclusion. While corporate social responsibility statements of leading companies confirm this, surveys show that there is still a long way to go. Among various reasons for the reluctant take-up of Design for All (DfA) by industry providing Information and Communication Technology (ICT), the lack of relevant knowledge and skills obviously plays a crucial role. Therefore, the DfA@eInclusion project has undertaken to develop curriculum guidelines an...

  8. TREATMENT OF WASTEWATER IN PLATING INDUSTRY BY CHELATE EXTRACTION METHOD

    Directory of Open Access Journals (Sweden)

    M. R. Massoudi Nejad, M. Rezazadeh Azary, M. Khatiby

    2007-01-01

    Full Text Available One of the most efficient methods to preserve environment is the procedure and method to achieve effective materials and the dual and reapplication of natural sources. In this research, After carrying out a vast study on the growing spot of Iranian oaks , of the 36 species and subspecies already identified, 10 species and subspecies were selected as they cover a vaster surface of Iranian woods in North Alborz Region, Arsabaran region and the western part of Zagros Mountains. 5 samples were collected of each type form diffrenet spots of the country. The effective and usable substances of oak fruit were extracted and isolated by the four methods of maceration, decoction, perculation and soxhlet tannin in one specie show no significant difference; However the amount of tannin in different species show significant differences in statistical term in such a way that the minimum and maximum tannin was found in Q.Brantii, Belangri with 9.7% tannin and Q.Macrantera, with 3.2 percent tannin. This amount was put in contact with wastewater various from plating industries in 20 to 50 mg/L amount. The mentioned wastewaters contained 50 to 750 mg/L heavy metals (chromium, nickel, zinc, copper and silver. The results were analyzed through a biofactor variance analysis model with repetition in each house (Toki Results showed that the removal output for zinc, copper, nickel and chromium without considering the initial concentration of the metal were 91 to 95 percent, 71 to 83.5 percent, 59 to 90 percent, and 84 to 85 percent, respectively. Also, with repect to the studies carried out with different methods and comparing the percentage of metals removal it was concluded that the removals output through applying 50 mg/L. hydroxide calcium along with 50 mg/L tannin with 82.3 percent average had the most effects in entire metals.

  9. The windows method

    DEFF Research Database (Denmark)

    Neighbour, Roger; Larsen, Jan-Helge

    2017-01-01

    through in sequence, each one opening a different viewpoint or window on the case. To experienced tutors, the windows method’s prescriptive structure may at first seem somewhat rigid. However, for learners with less experience of reflection and self-disclosure, it provides the security necessary...

  10. Color Wheel Windows

    Science.gov (United States)

    Leonard, Stephanie

    2012-01-01

    In this article, the author describes a painting and drawing lesson which was inspired by the beautiful circular windows found in cathedrals and churches (also known as "rose windows"). This two-week lesson would reinforce both the concept of symmetry and students' understanding of the color wheel. (Contains 1 online resource.)

  11. The Luminaire Window

    DEFF Research Database (Denmark)

    Hansen, Ellen Kathrine; Horóczi, Eszter

    2017-01-01

    integrated into the window. A qualitative experiment is carried out by integrating controllable LED in the frame of a façade window in a full-scale mock-up. It is examined how this set-up can support the colour spectrum and intensity of the daylight intake during the transmission time from daylight...

  12. Air transparent soundproof window

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang-Hoon, E-mail: shkim@mmu.ac.kr [Division of Marine Engineering, Mokpo National Maritime University, Mokpo 530-729, R. O. Korea (Korea, Republic of); Lee, Seong-Hyun [Korea Institute of Machinery and Materials, Yuseong-Gu, Daejeon 305-343, R. O. Korea (Korea, Republic of)

    2014-11-15

    A soundproof window or wall which is transparent to airflow is presented. The design is based on two wave theories: the theory of diffraction and the theory of acoustic metamaterials. It consists of a three-dimensional array of strong diffraction-type resonators with many holes centered on each individual resonator. The negative effective bulk modulus of the resonators produces evanescent wave, and at the same time the air holes with subwavelength diameter existed on the surfaces of the window for macroscopic air ventilation. The acoustic performance levels of two soundproof windows with air holes of 20mm and 50mm diameters were measured. The sound level was reduced by about 30 - 35dB in the frequency range of 400 - 5,000Hz with the 20mm window, and by about 20 - 35dB in the frequency range of 700 - 2,200Hz with the 50mm window. Multi stop-band was created by the multi-layers of the window. The attenuation length or the thickness of the window was limited by background noise. The effectiveness of the soundproof window with airflow was demonstrated by a real installation.

  13. Air transparent soundproof window

    Directory of Open Access Journals (Sweden)

    Sang-Hoon Kim

    2014-11-01

    Full Text Available A soundproof window or wall which is transparent to airflow is presented. The design is based on two wave theories: the theory of diffraction and the theory of acoustic metamaterials. It consists of a three-dimensional array of strong diffraction-type resonators with many holes centered on each individual resonator. The negative effective bulk modulus of the resonators produces evanescent wave, and at the same time the air holes with subwavelength diameter existed on the surfaces of the window for macroscopic air ventilation. The acoustic performance levels of two soundproof windows with air holes of 20mm and 50mm diameters were measured. The sound level was reduced by about 30 - 35dB in the frequency range of 400 - 5,000Hz with the 20mm window, and by about 20 - 35dB in the frequency range of 700 - 2,200Hz with the 50mm window. Multi stop-band was created by the multi-layers of the window. The attenuation length or the thickness of the window was limited by background noise. The effectiveness of the soundproof window with airflow was demonstrated by a real installation.

  14. Inorganic ion exchangers in industrial and nuclear waste treatment

    International Nuclear Information System (INIS)

    Manosso, Helena C.; Forbicini, Christina A.L.G.O.

    2000-01-01

    Zirconium and titanium phosphates have been used as inorganic ion exchangers for many years. Their characteristics, as high exchange capacity and ionizing and oxidizing reagents resistance, among others, have made them suitable for the treatment of wastes, mostly the radioactive ones. Due to its granulometry, zirconium phosphate (Zr P) must be prepared on an inert support, or it can be synthesized , as well as titanium phosphate, with modifiers, to promote better distribution of the exchanger over the support surface and to enlarge the cavities of their crystal lattice. The prepared exchangers were analyzed by electronic sweep microscopy. The studies on cesium and chromium sorption were made by using radioactive tracer technique, with Cs-134 and Cr-51 radioisotopes. The sorption of cesium in Zr P and Ti P was about 95%, but chromium showed very low sorption in the studied conditions, indicating the necessity of more experiments varying pH and temperature of the solutions. (author)

  15. Micro-electrolysis technology for industrial wastewater treatment.

    Science.gov (United States)

    Jin, Yi-Zhong; Zhang, Yue-Feng; Li, Wei

    2003-05-01

    Experiments were conducted to study the role of micro-electrolysis in removing chromaticity and COD and improving the biodegradability of wastewater from pharmaceutical, dye-printing and papermaking plants. Results showed that the use of micro-electrolysis technology could remove more than 90% of chromaticity and more than 50% of COD and greatly improved the biodegradability of pharmaceutical wastewater. Lower initial pH could be advantageous to the removal of chromaticity. A retention time of 30 minutes was recommended for the process design of micro-electrolysis. For the use of micro-electrolysis in treatment of dye-printing wastewater, the removal rates of both chromaticity and COD were increased from neutral condition to acid condition for disperse blue wastewater; more than 90% of chromaticity and more than 50% of COD could be removed in neutral condition for vital red wastewater.

  16. Public scandal about the nuclear waste treatment industry. Der Atommuellskandal

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    The events leading to the public scandal are summarized into three main items: (1) Accusation for taking bribe in the form of money and in kind. (2) Suspicion of false labelling of radioactive waste. (3) Suspicion of offense against the Non-Proliferation Treaty. The survey in hand is intended to prepare a sober judgement of the situation by: stating the facts and their significance in terms of safety; explaining the various types of radioactive wastes, their treatment and the quantities involved; explaining the legal provisions for transport of radioactive materials; discussing the problem of nuclear waste management in terms of quantity. The lesson to be drawn is that controls and further means of quality assurance are required to make the pathways of radioactive wastes are pellucid and verifiable. (orig./HSCH).

  17. The public scandal about the nuclear waste treatment industry

    International Nuclear Information System (INIS)

    1988-01-01

    The events leading to the public scandal are summarized into three main items: (1) Accusation for taking bribe in the form of money and in kind. (2) Suspicion of false labelling of radioactive waste. (3) Suspicion of offense against the Non-Proliferation Treaty. The survey in hand is intended to prepare a sober judgement of the situation by: stating the facts and their significance in terms of safety; explaining the various types of radioactive wastes, their treatment and the quantities involved; explaining the legal provisions for transport of radioactive materials; discussing the problem of nuclear waste management in terms of quantity. The lesson to be drawn is that controls and further means of quality assurance are required to make the pathways of radioactive wastes pellucid and verifiable. (orig./HSCH) [de

  18. Construction and Operation Costs of Wastewater Treatment and Implications for the Paper Industry in China.

    Science.gov (United States)

    Niu, Kunyu; Wu, Jian; Yu, Fang; Guo, Jingli

    2016-11-15

    This paper aims to develop a construction and operation cost model of wastewater treatment for the paper industry in China and explores the main factors that determine these costs. Previous models mainly involved factors relating to the treatment scale and efficiency of treatment facilities for deriving the cost function. We considered the factors more comprehensively by adding a regional variable to represent the economic development level, a corporate ownership factor to represent the plant characteristics, a subsector variable to capture pollutant characteristics, and a detailed-classification technology variable. We applied a unique data set from a national pollution source census for the model simulation. The major findings include the following: (1) Wastewater treatment costs in the paper industry are determined by scale, technology, degree of treatment, ownership, and regional factors; (2) Wastewater treatment costs show a large decreasing scale effect; (3) The current level of pollutant discharge fees is far lower than the marginal treatment costs for meeting the wastewater discharge standard. Key implications are as follows: (1) Cost characteristics and impact factors should be fully recognized when planning or making policies relating to wastewater treatment projects or technology development; (2) There is potential to reduce treatment costs by centralizing wastewater treatment via industrial parks; (3) Wastewater discharge fee rates should be increased; (4) Energy efficient technology should become the future focus of wastewater treatment.

  19. Industrial heat treatment of R-HPDC A356 automotive brake callipers

    CSIR Research Space (South Africa)

    Chauke, L

    2012-10-01

    Full Text Available Heat treatment of rheo-high pressure die cast (R-HPDC) A356 brake callipers has produced good mechanical properties on the laboratory scale. An industrial heat treatment is required to evaluate the applicability and conformance of the R-HPDC A356...

  20. Industrial heat treatment of R-HPDC A356 automotive brake callipers [Conference paper

    CSIR Research Space (South Africa)

    Chauke, L

    2012-10-01

    Full Text Available Heat treatment of rheo-high pressure die cast (R-HPDC) A356 brake callipers has produced good mechanical properties on the laboratory scale. An industrial heat treatment is required to evaluate the applicability and conformance of the R-HPDC A356...

  1. 77 FR 60126 - Guidance for Industry on Acute Bacterial Otitis Media: Developing Drugs for Treatment; Availability

    Science.gov (United States)

    2012-10-02

    ...; Formerly 2008N-0004] Guidance for Industry on Acute Bacterial Otitis Media: Developing Drugs for Treatment... Media: Developing Drugs for Treatment.'' This guidance addresses FDA's current thinking regarding the overall development program and clinical trial designs for drugs to support an indication for the...

  2. Influence of heat treatment on magnesium alloys meant to automotive industry

    NARCIS (Netherlands)

    Popescu, G.; Moldovan, P.; Bojin, D.; Sillekens, W.H.

    2009-01-01

    The paper presents a study concerning the heat treatment realized on magnesium alloys, from AZ80 and ZK60 class. These alloys are destined to replace the conventional ferrous and aluminum alloys in automotive industry. It was realized the heat treatment, T5 - artificially aging, and it were

  3. 78 FR 27115 - Draft Guidance for Industry on Expanded Access to Investigational Drugs for Treatment Use...

    Science.gov (United States)

    2013-05-09

    ... Use--Questions and Answers; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice of... guidance for industry entitled ``Expanded Access to Investigational Drugs for Treatment Use--Qs & As... drugs for treatment use. FDA has received a number of questions about implementation of its expanded...

  4. Visual merchandising window display

    Directory of Open Access Journals (Sweden)

    Opris (Cas. Stanila M.

    2013-12-01

    Full Text Available Window display plays a major part in the selling strategies; it does not only include the simple display of goods, nowadays it is a form of art, also having the purpose of sustaining the brand image. This article wants to reveal the tools that are essential in creating a fabulous window display. Being a window designer is not an easy job, you have to always think ahead trends, to have a sense of colour, to know how to use light to attract customers in the store after only one glance at the window. The big store window displays are theatre scenes: with expensive backgrounds, special effects and high fashion mannequins. The final role of the displays is to convince customers to enter the store and trigger the purchasing act which is the final goal of the retail activity.

  5. Efficiency Research on Meat Industry Waste Water Treatment Applying the Method of Dissolved Air Flotation

    Directory of Open Access Journals (Sweden)

    Valentinas Gerasimovas

    2012-01-01

    Full Text Available To protect environment from industrial pollution, strict requirements for waste water treatment are imposed. The purpose of research is to establish an optimal ratio of saturated liquid and meat industry waste water. Research included JCC “Traidenis” waste water treatment system installed in JSC “BHJ Baltic”. Investigations into treated waste water indicated that an optimal ratio of waste water and saturated liquid was 2/1 under duration time of 8 minutes. Efficient waste water treatment made 86% and the ratio of waste water and saturated liquid was 2/1.Article in Lithuanian

  6. Recent advances and industrial viewpoint for biological treatment of wastewaters by oleaginous microorganisms.

    Science.gov (United States)

    Huang, Chao; Luo, Mu-Tan; Chen, Xue-Fang; Xiong, Lian; Li, Xiao-Mei; Chen, Xin-De

    2017-05-01

    Recently, technology of using oleaginous microorganisms for biological treatment of wastewaters has become one hot topic in biochemical and environmental engineering for its advantages such as easy for operation in basic bioreactor, having potential to produce valuable bio-products, efficient wastewaters treatment in short period, etc. To promote its industrialization, this article provides some comprehensive analysis of this technology such as its advances, issues, and outlook especially from industrial viewpoint. In detail, the types of wastewaters can be treated and the kinds of oleaginous microorganisms used for biological treatment are introduced, the potential of industrial application and issues (relatively low COD removal, low lipid yield, cost of operation, and lack of scale up application) of this technology are presented, and some critical outlook mainly on co-culture method, combination with other treatments, process controlling and adjusting are discussed systematically. By this article, some important information to develop this technology can be obtained. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. The use of constructed wetlands for the treatment of industrial wastewater

    Directory of Open Access Journals (Sweden)

    Skrzypiecbcef Katarzyna

    2017-09-01

    Full Text Available Constructed wetlands are characterized by specific conditions enabling simultaneous various physical and biochemical processes. This is the result of specific environment for the growth of microorganisms and hydrophytes (aquatic and semiaquatic plants which are capable of living in aerobic, anaerobic and facultative anaerobic conditions. Their interaction contributes to the intensification of oxidation and reduction responsible for the removal and retention of pollutants. These processes are supported by sorption, sedimentation and assimilation. Thanks to these advantages, treatment wetland systems have been used in communal management for over 50 years. In recent years, thanks to its advantages, low operational costs and high removal efficiency, there is growing interest in the use of constructed wetlands for the treatment or pre-treatment of various types of industrial wastewater. The study analyzes current use of these facilities for the treatment of industrial wastewater in the world. The conditions of use and efficiency of pollutants removal from readily and slowly biodegradable wastewater, with special emphasis on specific and characteristic pollutants of particular industries were presented. The use of subsurface horizontal flow beds for the treatment of industrial wastewater, among others from crude oil processing, paper production, food industry including wineries and distillery, olive oil production and coffee processing was described. In Poland constructed wetlands are used for the treatment of sewage and sludge from milk processing in pilot scale or for dewatering of sewage sludge produced in municipal wastewater treatment plant treating domestic sewage with approximately 40% share of wastewater from dairy and fish industry. In all cases, constructed wetlands provided an appropriate level of treatment and in addition the so-called ecosystem service.

  8. Industrial technology transfer of the food irradiation treatment

    International Nuclear Information System (INIS)

    Sivinski, J.S.

    1985-01-01

    While the Joint Expert Committee on Food Irradiation (WHO-FAO-IAEA) concluded that all foods, irradiated up to a dose of 10 kGy is safe for human consumption from the toxicologic view point, the US FDA intends to clear food irradiated up to a dose of 1 kGy and has cleared spices up to 10 kGy. The various possible applications of food irradiation are discussed and so is the food irradiation project of the US DOE and its objectives. The main item on the DOE program is the treatment of pork meat, infested with Trichinella Spiralis, at doses of 0.3 kGy, and the diverse aspects of the research program are described. It was demonstrated experimentally that only 0.2 kGy is necessary for inactivation of the first generation of larvae, whereas inhibition of the second generation of larvae, encysted within the muscles requires a dose of 0.1 kGy. However, for complete inactivation a dose of 0.3 kGy was found necessary. The overall feasibility of pork meat irradiation is being studied, including estimation of consumer reaction. In expectation of FDA clearance of irradiated pork meat, further economic feasibility studies and a demonstration scale irradiation facility are planned. The radiation disinfestation of fruits for quarantine purposes is also discussed, presenting results obtained by the USDA with respect to pomela, infested with fruit flies, and the possible replacement of EDB looks feasible to the US authorities. A transportable Cs 137 irradiator for demonstration purposes has been designed and will be applied to different products. The possible application of irradiation to algae, produced in sewage processing plants, is considered with the aim of producing a high protein cattle feed. US AID and US DOE are jointly investigating the possible application of this technology in developing countries which export their products to the USA

  9. Investigating Clinical Failure of Bone Grafting through a Window at the Femoral Head Neck Junction Surgery for the Treatment of Osteonecrosis of the Femoral Head.

    Directory of Open Access Journals (Sweden)

    Wei Zuo

    Full Text Available This study aimed to analyze the clinical factors related to the failure of bone grafting through a window at the femoral head-neck junction.In total, 119 patients (158 hips underwent bone grafting for treatment of avascular necrosis of the femoral head. The patients were classified by their ARCO staging and CJFH classification. All patients were clinically and radiographically followed up every three months during the first year and every six months in the following year. The clinical follow-up comprised determination of pre- and postoperative Harris hip scores, while serial AP, frog lateral radiographs, and CT scan were used for the radiographic follow-up.The clinical failure of bone grafting was observed in 40 patients. The clinical failure rates in patients belonging to ARCO stage II period, IIIa, and III (b + c were 25.9%, 16.2%, and 61.5%, respectively, while those in patients belonging to (C + M + L1 type and L2, L3 type disease groups were 1.7%, 38.9%, and 39%, respectively. The clinical failure rates in patients aged below 40 and those aged 40 and over were 20.5% and 39.0%, respectively (all P < 0.05.Disease type, disease stage, and patient age are risk factors for failure of bone graft surgery. Patients belonging to ARCO stage II and IIIa showed a good overall response rate, while patients belonging to ARCO stage IIIb and IIIc and those with necrotic lesions involving the lateral pillar (L2 and L3 type showed high surgical failure rates.

  10. Investigating Clinical Failure of Bone Grafting through a Window at the Femoral Head Neck Junction Surgery for the Treatment of Osteonecrosis of the Femoral Head

    Science.gov (United States)

    Sun, Wei; Zhao, Dingyan; Gao, Fuqiang; Su, Yangming; Li, Zirong

    2016-01-01

    Aims This study aimed to analyze the clinical factors related to the failure of bone grafting through a window at the femoral head-neck junction. Methods In total, 119 patients (158 hips) underwent bone grafting for treatment of avascular necrosis of the femoral head. The patients were classified by their ARCO staging and CJFH classification. All patients were clinically and radiographically followed up every three months during the first year and every six months in the following year. The clinical follow-up comprised determination of pre- and postoperative Harris hip scores, while serial AP, frog lateral radiographs, and CT scan were used for the radiographic follow-up. Results The clinical failure of bone grafting was observed in 40 patients. The clinical failure rates in patients belonging to ARCO stage II period, IIIa, and III (b + c) were 25.9%, 16.2%, and 61.5%, respectively, while those in patients belonging to (C + M + L1) type and L2, L3 type disease groups were 1.7%, 38.9%, and 39%, respectively. The clinical failure rates in patients aged below 40 and those aged 40 and over were 20.5% and 39.0%, respectively (all P < 0.05). Conclusion Disease type, disease stage, and patient age are risk factors for failure of bone graft surgery. Patients belonging to ARCO stage II and IIIa showed a good overall response rate, while patients belonging to ARCO stage IIIb and IIIc and those with necrotic lesions involving the lateral pillar (L2 and L3 type) showed high surgical failure rates. PMID:27285821

  11. Technical and Economic Comparison of Conventional Wastewater Treatment Systems in the Sugar Industries in Iran

    Directory of Open Access Journals (Sweden)

    Mehdi Ahmadi

    2005-03-01

    Full Text Available Iran’s location in an arid and water scarce area characterized by qualititative and quantitative degradation in its water resources makes strict planning imperative for reduced water consumption and wastewater treatment and reuse, especially in the industry sector. The technical and economic evaluation of various industrial treatment processes is a key factor in the success of such schemes in the face of the effects of climate variety, high wastewater treatment costs, and environmental factors on selecting a most suitable alternative for industrial wastewater treatment. The situation is even more critical in the case of the sugar industry as the largest pollutant source and especially because more than 90% of its facilities are located on plains with a negative water balance. Reviewing wastewater problems associated with the Iranian sugar facilities, this paper will attempt to perform an economic assessment and a comparison of conventional anaerobic-aerobic processes under various conditions in order to identify the best aleternative and to determine the most important environmental and cost factors affecting the selection of a desirable alternative. For this purpose, six combined treatment systems are selected and their construction and operation costs and detailed uniform annual cost sensitivity analysis based on the most important parameters are presented. Finally, two different combined wastewater treatment systems of UASB + facultative lagoons and UASB + trickling filters will be introduced as the best treatment processes for Iranian conditions.

  12. Recent Progress in TiO2-Mediated Solar Photocatalysis for Industrial Wastewater Treatment

    Directory of Open Access Journals (Sweden)

    Tong Zhang

    2014-01-01

    Full Text Available The current paper reviews the application of TiO2-mediated solar photocatalysis for industrial wastewater treatment, starting with a brief introduction on the background of industrial wastewater and the development of wastewater treatment processes, especially advanced oxidation processes (AOPs. We, then, discuss the application of solar TiO2 photocatalysis in treating different kinds of industrial wastewater, such as paper mill wastewater, textile wastewater, and olive mill wastewater. In the end, we compare solar TiO2 photocatalysis with other AOPs in terms of effectiveness, energy, and chemical consumption. Personal perspectives are also given, which may provide new insights to the future development of TiO2 photocatalysis for industrial wastewater.

  13. Selecting windows for energy efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    New window technologies have increased energy benefits and comfort, and have provided more practical options for consumers. This selection guide will help homeowners, architects, and builders take advantage of the expanding window market. The guide contains three sections: an explanation of energy-related window characteristics, a discussion of window energy performance ratings, and a convenient checklist for window selection.

  14. GA microwave window development

    International Nuclear Information System (INIS)

    Moeller, C.P.; Kasugai, A.; Sakamoto, K.; Takahashi, K.

    1994-10-01

    The GA prototype distributed window was tested in a 32 mm diam. waveguide system at a power density suitable for a MW gyrotron, using the JAERI/Toshiba 110 GHz long pulse internal converter gyrotron in the JAERI test stand. The presence of the untilted distributed window had no adverse effect on the gyrotron operation. A pulse length of 10 times the calculated thermal equilibrium time (1/e time) of 30 msec was reached, and the window passed at least 750 pulses greater than 30 msec and 343 pulses greater than 60 msec. Beyond 100 msec, the window calorimetry reached steady state, allowing the window dissipation to be measured in a single pulse. The measured loss of 4.0% agrees both with the estimated loss, on which the stress calculations are based, and with the attenuation measured at low power in the HE 11 mode. After the end of the tests, the window was examined; no evidence of arcing air coating was found in the part of the window directly illuminated by the microwaves, although there was discoloration in a recess containing an optical diagnostic which outgassed, causing a local discharge to occur in that recess. Finally, there was no failure of the metal-sapphire joints during a total operating time of 50 seconds consisting of pulses longer than 30 msec

  15. Treatment of organic pollution in industrial saline wastewater: a literature review.

    Science.gov (United States)

    Lefebvre, Olivier; Moletta, René

    2006-12-01

    Many industrial sectors are likely to generate highly saline wastewater: these include the agro-food, petroleum and leather industries. The discharge of such wastewater containing at the same time high salinity and high organic content without prior treatment is known to adversely affect the aquatic life, water potability and agriculture. Thus, legislation is becoming more stringent and the treatment of saline wastewater, both for organic matter and salt removal, is nowadays compulsory in many countries. Saline effluents are conventionally treated through physico-chemical means, as biological treatment is strongly inhibited by salts (mainly NaCl). However, the costs of physico-chemical treatments being particularly high, alternative systems for the treatment of organic matter are nowadays increasingly the focus of research. Most of such systems involve anaerobic or aerobic biological treatment. Even though biological treatment of carbonaceous, nitrogenous and phosphorous pollution has proved to be feasible at high salt concentrations, the performance obtained depends on a proper adaptation of the biomass or the use of halophilic organisms. Another major limit is related to the turbidity problems inherent in saline effluents. For this reason, the major need for research in the future will be the combination of physico-chemical/biological treatment of saline industrial effluents, with regard to the global treatment chain, in order to meet the regulations.

  16. Potential redox behaviour on industrial wastes treatment; Evolucion del potencial redox en tratamiento y depuracion industrial de aguas

    Energy Technology Data Exchange (ETDEWEB)

    Marin Galvin, R.; rodriguez Mellado, J. M.; Ruiz Montoya, M.; Jimenez Gamero, C. [Departamento Quimica Fisica y Termodinamica aplicada, Facultad de ciencias, Universidad de Cordoba (Spain)

    1995-12-31

    A study over the behaviour of redox potential in waters and wastewaters under industrial treatment processes has been carried out. In both cases, the potential-time curves obtained were in a logarithmical shape being more strongly distorted when the waters contained more dissolved and suspended compounds. Oxygen fundamentally leads the redox state in wastewaters, although ozone and chlorine almost oxygen lead the redox potential in raw waters intended to drinking water production. In this way, by increasing 210 m V the E{sub H} value of water or maintaining the rH>21.8 it can be industrially sterilized the drinking water. On the other hand, increases of 350 mV in the EH values from wastewaters influent to plant to the treated waters, allowed discarding 450 mg/l of DQO and 9 mg/l of NH{sub 3} from the former. Finally, the exploitation of the Wastewaters Treatment Plant by regulation of the E{sub H} values can suppose a good practice. (Author) 14 refs.

  17. The Efficient Windows Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    Petermann, Nils

    2006-03-31

    The Efficient Windows Collaborative (EWC) is a coalition of manufacturers, component suppliers, government agencies, research institutions, and others who partner to expand the market for energy efficient window products. Funded through a cooperative agreement with the U.S. Department of Energy, the EWC provides education, communication and outreach in order to transform the residential window market to 70% energy efficient products by 2005. Implementation of the EWC is managed by the Alliance to Save Energy, with support from the University of Minnesota and Lawrence Berkeley National Laboratory.

  18. Rails on Windows

    CERN Document Server

    Hibbs, Curt

    2007-01-01

    It's no secret that the entire Ruby onRails core team uses OS X as their preferreddevelopment environment. Becauseof this, it is very easy to findauthoritative information on the webabout using Rails on OS X. But the truthis that Windows developers using Railsprobably outnumber those using otherplatforms. A Windows development environmentcan be just as productive asany other platform. This is a guide to developing with Rubyon Rails under Windows. It won't teachyou how to write Ruby on Rails web applications,but it will show you what toolsto use and how to set them up to createa complete Rail

  19. Windows 8 simplified

    CERN Document Server

    McFedries, Paul

    2012-01-01

    The easiest way for visual learners to get started with Windows 8 The popular Simplified series makes visual learning easier than ever, and with more than 360,000 copies sold, previous Windows editions are among the bestselling Visual books. This guide goes straight to the point with easy-to-follow, two-page tutorials for each task. With full-color screen shots and step-by-step directions, it gets beginners up and running on the newest version of Windows right away. Learn to work with the new interface and improved Internet Explorer, manage files, share your computer, and much more. Perfect fo

  20. Windows 95 Beslutningsguide

    DEFF Research Database (Denmark)

    Sørensen, Jens Otto

    1996-01-01

    Mange virksomheder der bruger pc'er står netop nu over for valget: Skal vi fortsætte med DOS/Windows 3.x som operativsystem, eller skal vi skifte til efterfølgeren Windows 95? Skal vi/kan vi skifte successivt, eller skal det være en "alt eller intet beslutning". Hvornår er det rigtige tidspunkt...... at skifte? Denne artikel vil forsøge at give en baggrundsviden om Windows 95, der kan hjælpe virksomhederne igennem denne beslutningsfase....

  1. Windows 7 resource kit

    CERN Document Server

    Northrup, Tony; Honeycutt, Jerry; Wilson, Ed

    2009-01-01

    In-depth and comprehensive, this RESOURCE KIT delivers the information you need to administer your Windows 7 system. You get authoritative technical guidance from those who know the technology best-Microsoft Most Valuable Professionals (MVPs) and the Windows 7 product team-along with essential scripts and resources. In addition, "Direct from the Source" sidebars offer deep insights and troubleshooting tips from the Windows 7 team. Get expert guidance on how to: Use Microsoft Deployment Toolkit best practices and tools. Plan user-state migration and test application compatibility.

  2. Application of processes of advanced oxidation as phenol treatment in industrial residual waters of refinery

    International Nuclear Information System (INIS)

    Forero, Jorge Enrique; Ortiz, Olga Patricia; Rios, Fabian

    2005-01-01

    Although more efficient and economical processes for the treatment of sewage have been developed in recent years, the challenge they are facing-due to the greater knowledge of the effect that pollutants have on the environment, the greater consumption of water because of the development of human and industrial activity and the reduction of fresh water sources indicate that we are far from attaining the final solution. This affirmation specially applies to the pollutants, which are resistant to biological treatment processes, such as most of the aromatic compounds found in sewage of the petrochemical industries. In this document, the processes known as advanced oxidation will be explored. Theses have been reported as having the greatest potential in the treatment of these pollutants. Likewise the results of the application of these technologies with waters typical of the petroleum industry will be reported. These have previously been evaluated with processes of typical ozonization

  3. Utilization of Paper Sludge Wastes for Treatment of Wastewater from Food Processing Industries

    Directory of Open Access Journals (Sweden)

    Tohru Suzuki

    2012-12-01

    Full Text Available The food processing industries usually produced large amount of wastewater containing fine and small particles. It takes long time for complete settlement of the fine and small particles in the wastewater. The coagulation method appears to become one of the useful treatments. New inorganic coagulant named “Agoclean‒P” has been developed from paper sludge ash. The treatment by coagulation and flocculation were carried out for the wastewater from three different food processing industries namely soup, tofu, and natto. “Hi‒Biah‒System”, which is an in‒situ solidification system, was used for the continuous treatment of wastewater. The parameters for the water quality were pH, five‒day biochemical oxygen demand (BOD5, chemical oxygen demand (COD, total suspended solids (TSS, total nitrogen (TN and total phosphorus (TP. These parameters after the treatment became much lower values relative to those obtained before the treatment.

  4. A study on the treatment of industrial wastewater containing heavy metals

    International Nuclear Information System (INIS)

    Yoon, Myoung Hwan; Jang, In Soon; Park, Jang Jin; Choi, Chang Shik; Lee, Yoon Hwan; Shin, Jin Myoung

    1993-06-01

    It is essential to treat heavy metals contained in industrial wastewater safely and economically for the protection of the environment. An effective method of separating heavy metals using acornic acid for the first time in the world must be utilized for wastewater treatment. One of the merits of this method lies in its cheap treatment cost. Furthermore, the secondary contamination, which occurs often when chemical purifiers are used, could be minimized. Another advantage of utilizing the acornic acid is that various kinds of heavy metals contained in industrial wastewater can be purified at once. The final purpose of this project is to commercialize the method by 1994. (Auther)

  5. Effects of reactive filters based on modified zeolite in dairy industry wastewater treatment process

    Directory of Open Access Journals (Sweden)

    Kolaković Srđan

    2013-01-01

    Full Text Available Application of adsorbents based on organo-zeolites has certain advantages over conventional methods applied in food industry wastewater treatment process. The case study presented in this paper examines the possibilities and effects of treatment of dairy industry wastewater by using adsorbents based on organo-zeolites. The obtained results indicate favorable filtration properties of organo-zeolite, their high level of adsorption of organic matter and nitrate nitrogen in the analyzed wastewater. This paper concludes with recommendations of optimal technical and technological parameters for the application of these filters in practice.

  6. Windows 10 Technical Preview

    OpenAIRE

    Jyväsjärvi, Teppo

    2015-01-01

    Tässä opinnäytetyössä tutustaan uuden kesällä 2015 virallisesti julkaistavan Windows 10 -käyttöjärjestelmän Technical Preview -kehitysversioon. Ensimmäinen Technical Preview -versio julkaistiin syksyllä 2014. Opinnäytetyössä tutustaan Windows 10:n uusin ominaisuuksiin ja tehdään vertailua aiemman Windows 8.1 -version kanssa. Työssä Windows 10 Technical Preview asennetaan virtuaalikoneelle, käydään läpi asennuksen eri vaiheet sekä suurimmat muutokset käyttöliittymässä ja sovelluksissa. Op...

  7. SAF for Windows

    DEFF Research Database (Denmark)

    Hansen, Timme

    2001-01-01

    SAF for Windows er et computerprogram til parametrisk konstruktion af translationsskaller. Skaloverfladernes tredimensionelle, facetterede form fremkommer ved en kombination af to todimensionelle formbestemmende kurver, som kan vælges og redigeres af brugeren. Programmet kan udfolde de genererede...

  8. Windows Security patch required

    CERN Multimedia

    3004-01-01

    This concerns Windows PCs (XP, 2000, NT) which are NOT centrally managed at CERN for security patches, e.g. home PCs, experiment PCs, portables,... A security hole which can give full privileges on Windows systems needs to be URGENTLY patched. Details of the security hole and hotfix are at: http://cern.ch/it-div/news/hotfix-MS03-026.asp http://www.microsoft.com/technet/security/bulletin/MS03-026.asp

  9. Delineating the conformal window

    DEFF Research Database (Denmark)

    Frandsen, Mads Toudal; Pickup, Thomas; Teper, Michael

    2011-01-01

    We identify and characterise the conformal window in gauge theories relevant for beyond the standard model building, e.g. Technicolour, using the criteria of metric confinement and causal analytic couplings, which are known to be consistent with the phase diagram of supersymmetric QCD from Seiberg...... duality. Using these criteria we find perturbation theory to be consistent throughout the predicted conformal window for several of these gauge theories and we discuss recent lattice results in the light of our findings....

  10. Windows Security patch required

    CERN Multimedia

    2003-01-01

    This concerns Windows PCs (XP, 2000, NT) which are NOT centrally managed at CERN for security patches, e.g. home PCs, experiment PCs, portables, ... A security hole which can give full privileges on Windows systems needs to be URGENTLY patched. Details of the security hole and hotfix are at: http://cern.ch/it-div/news/hotfix-MS03-026.asp http://www.microsoft.com/technet/security/bulletin/MS03-026.asp

  11. Windows Security patch required

    CERN Multimedia

    2003-01-01

    This concerns Windows PCs (XP, 2000, NT) which are NOT centrally managed at CERN for security patches, e.g. home PCs, experiment PCs, portables,... A security hole which can give full privileges on Windows systems needs to be URGENTLY patched. Details of the security hole and hotfix are at: http://cern.ch/it-div/news/hotfix-MS03-026.asp http://www.microsoft.com/technet/security/bulletin/MS03-026.asp

  12. Microsoft Windows Server 2012 administration instant reference

    CERN Document Server

    Hester, Matthew

    2013-01-01

    Fast, accurate answers for common Windows Server questions Serving as a perfect companion to all Windows Server books, this reference provides you with quick and easily searchable solutions to day-to-day challenges of Microsoft's newest version of Windows Server. Using helpful design features such as thumb tabs, tables of contents, and special heading treatments, this resource boasts a smooth and seamless approach to finding information. Plus, quick-reference tables and lists provide additional on-the-spot answers. Covers such key topics as server roles and functionality, u

  13. High Performance Window Retrofit

    Energy Technology Data Exchange (ETDEWEB)

    Shrestha, Som S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hun, Diana E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Desjarlais, Andre Omer [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2013-12-01

    The US Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) and Traco partnered to develop high-performance windows for commercial building that are cost-effective. The main performance requirement for these windows was that they needed to have an R-value of at least 5 ft2∙ F∙h/Btu. This project seeks to quantify the potential energy savings from installing these windows in commercial buildings that are at least 20 years old. To this end, we are conducting evaluations at a two-story test facility that is representative of a commercial building from the 1980s, and are gathering measurements on the performance of its windows before and after double-pane, clear-glazed units are upgraded with R5 windows. Additionally, we will use these data to calibrate EnergyPlus models that we will allow us to extrapolate results to other climates. Findings from this project will provide empirical data on the benefits from high-performance windows, which will help promote their adoption in new and existing commercial buildings. This report describes the experimental setup, and includes some of the field and simulation results.

  14. Thin Film & Deposition Systems (Windows)

    Data.gov (United States)

    Federal Laboratory Consortium — Coating Lab: Contains chambers for growing thin film window coatings. Plasma Applications Coating Lab: Contains chambers for growing thin film window coatings. Solar...

  15. A national discharge load of perfluoroalkyl acids derived from industrial wastewater treatment plants in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hee-Young; Seok, Hyun-Woo [Department of Civil and Environmental Engineering, Pusan National University, Busan 46241 (Korea, Republic of); Kwon, Hye-Ok; Choi, Sung-Deuk [School of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology, Ulsan 44919 (Korea, Republic of); Seok, Kwang-Seol [Chemical Research Division, National Institute of Environmental Research, Incheon 22689 (Korea, Republic of); Oh, Jeong Eun [Department of Civil and Environmental Engineering, Pusan National University, Busan 46241 (Korea, Republic of)

    2016-09-01

    Levels of 11 perfluoroalkyl acids (PFAAs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), were measured in wastewater (influent and effluent) and sludge samples collected from 25 industrial wastewater treatment plants (I-WWTPs) in five industrial sectors (chemicals, electronics, metals, paper, and textiles) in South Korea. The highest ∑{sub 11}PFAAs concentrations were detected in the influent and effluent from the paper (median: 411 ng/L) and textile (median: 106 ng/L) industries, and PFOA and PFOS were the predominant PFAAs (49–66%) in wastewater. Exceptionally high levels of PFAAs were detected in the sludge associated with the electronics (median: 91.0 ng/g) and chemical (median: 81.5 ng/g) industries with PFOS being the predominant PFAA. The discharge loads of 11 PFAAs from I-WWTP were calculated that total discharge loads for the five industries were 0.146 ton/yr. The textile industry had the highest discharge load with 0.055 ton/yr (PFOA: 0.039 ton/yr, PFOS: 0.010 ton/yr). Municipal wastewater contributed more to the overall discharge of PFAAs (0.489 ton/yr) due to the very small industrial wastewater discharge compared to municipal wastewater discharge, but the contribution of PFAAs from I-WWTPs cannot be ignored. - Highlights: • 11 PFAAs in wastewater and sludge from 5 industrial sectors were investigated. • PFOA and PFOS were the dominant in wastewater while PFOS was predominant in sludge. • The total discharge loads from 5 industrial sectors 0.146 ton/yr. • The textile industry showed the highest discharge load with 0.055 ton/yr.

  16. A Tool to Support Optimal Industrial Wastewater Treatment Design and Analysis

    DEFF Research Database (Denmark)

    Quaglia, Alberto; Pennati, Alessandra; Bozkurt, Hande

    2013-01-01

    Industrial Wastewater Treatment Plant (IWWTP) design is often based on in-house expert knowledge and experience. Because of time and resources constraints, only a small number of alternative treatment configurations and ideas are evaluated while designing an IWWTP. Consequently, the selected design...... may be suboptimal or disregard opportunities for water recycle or resource recovery and reuse. In this contribution, we propose a model-based toolbox developed to help wastewater professionals to screen among a large number of alternatives in order to identify the optimal treatment configuration from...... an economic cost-benefit perspective. The toolbox is demonstrated through a case study, dealing with oil refinery wastewater treatment and water recycle....

  17. Industrial wastewater treatment network based on recycling and rerouting strategies for retrofit design schemes

    DEFF Research Database (Denmark)

    Sueviriyapan, Natthapong; Suriyapraphadilok, Uthaiporn; Siemanond, Kitipat

    2015-01-01

    is employed to solve a network superstructure-based optimization problem formulated as Mixed Integer Linear and/or Non-Linear Programming (MILP/MINLP). Data from a petroleum refinery effluent treatment plant together with special design constraints are employed to formulate different design schemes based...... a generic model-based synthesis and design framework for retrofit wastewater treatment networks (WWTN) of an existing industrial process. The developed approach is suitable for grassroots and retrofit systems and adaptable to a wide range of wastewater treatment problems. A sequential solution procedure...... for the future development of the existing wastewater treatment process....

  18. Influence of physico-chemical treatment on the subsequent biological process treating paper industry wastewater.

    Science.gov (United States)

    el Khames Saad, Mouhamed; Moussaoui, Younes; Zaghbani, Asma; Mosrati, Imen; Elaloui, Elimame; Ben Salem, Ridha

    2012-01-01

    The present paper presents the main results of the biodegradation study of paper industry wastewater through physico-chemical treatment. Indeed, around 60% of chemical oxygen demand (COD) removal can be achieved by electroflocculation treatment. Furthermore, a removal efficiency of the COD of almost 91% has been obtained by biological treatment, with activated amount of sludge for 24 h of culture. Concerning the physico-chemical pre-treatment of the untreated, filtered and electroflocculated rejection effluents, it has been investigated through the degradation curve of COD studies.

  19. Identification of industrial wastewater by clustering wastewater treatment plant influent ultraviolet visible spectra.

    Science.gov (United States)

    Dürrenmatt, David J; Gujer, Willi

    2011-01-01

    A procedure is proposed which allows the detection of industrial discharge events at the inlet of a wastewater treatment plant without the need for measurements performed at the industry, for special equipment and for exact knowledge of the industrial sewage. By performing UV/Vis measurements at the inlet of a plant and analyzing them with a two-staged clustering method consisting of the self-organizing map algorithm and the Ward clustering method, typical sewage clusters can be found. In an experiment performed at a mid-sized Swiss plant, one cluster of a cluster model with five clusters could be attributed to an industrial laundry. Out of 95 laundry discharging events measured in a validation period, 93 were correctly detected by the proposed algorithm, two were false positives and five were false negatives.

  20. A national discharge load of perfluoroalkyl acids derived from industrial wastewater treatment plants in Korea.

    Science.gov (United States)

    Kim, Hee-Young; Seok, Hyun-Woo; Kwon, Hye-Ok; Choi, Sung-Deuk; Seok, Kwang-Seol; Oh, Jeong Eun

    2016-09-01

    Levels of 11 perfluoroalkyl acids (PFAAs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), were measured in wastewater (influent and effluent) and sludge samples collected from 25 industrial wastewater treatment plants (I-WWTPs) in five industrial sectors (chemicals, electronics, metals, paper, and textiles) in South Korea. The highest ∑11PFAAs concentrations were detected in the influent and effluent from the paper (median: 411ng/L) and textile (median: 106ng/L) industries, and PFOA and PFOS were the predominant PFAAs (49-66%) in wastewater. Exceptionally high levels of PFAAs were detected in the sludge associated with the electronics (median: 91.0ng/g) and chemical (median: 81.5ng/g) industries with PFOS being the predominant PFAA. The discharge loads of 11 PFAAs from I-WWTP were calculated that total discharge loads for the five industries were 0.146ton/yr. The textile industry had the highest discharge load with 0.055ton/yr (PFOA: 0.039ton/yr, PFOS: 0.010ton/yr). Municipal wastewater contributed more to the overall discharge of PFAAs (0.489ton/yr) due to the very small industrial wastewater discharge compared to municipal wastewater discharge, but the contribution of PFAAs from I-WWTPs cannot be ignored. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. [Characteristic research of shortcut denitrification in synthetic ammonia industrial wastewater treatment process].

    Science.gov (United States)

    Li, Yan; Li, Ze-Bing; Ma, Jia-Xuan; Wang, Xiao-Yi; Zhao, Bai-Hang; Li, Jun

    2012-06-01

    Active sludge was from a pilot-scale synthetic ammonia industrial wastewater treatment plant with a strengthen anoxic-oxic (A/O) technology. The zero order kinetic model was suit for describing shortcut and complete denitrification process. Experimental results showed that shortcut denitrification could reduce 14.1% carbon source consumption and 55.7% denitrification time, respectively, comparing with complete denitrification. The maximum specific denitrification rate was 0.509 g x (g x d)(-1) with an initial NO2(-) -N concentration of 36.82 mg x L(-1) and pH 7.5. In the industrial practice, it must be avoided pH higher than 9.0 in anoxic zone for industrial treatment. Replication-selective denitrifying bacteria showed a strong adaptability to methanol and ethanol, but showed maladaptation to other small molecular and easily biodegradable organics, such as glucose and acetic acid.

  2. [Evaluation and selection of VOCs treatment technologies in packaging and printing industry].

    Science.gov (United States)

    Wang, Hai-Lin; Wang, Jun-Hui; Zhu, Chun-Lei; Nie, Lei; Hao, Zheng-Ping

    2014-07-01

    Volatile organic compounds (VOCs) play an important role in urban air pollution. Activities of industries including the packaging and printing industries are regarded as the major sources. How to select the suitable treating techniques is the major problem for emission control. In this article, based on the VOCs emission characteristics of the packaging and printing industry and the existing treatment technologies, using the analytic hierarchy process (AHP) model, an evaluation system for VOCs selection was established and all the technologies used for treatment were assessed. It showed that the priority selection was in the following order: Carbon Fiber Adsorption-Desorption > Granular Carbon Adsorption-Desorption > Thermal Combustion > Regenerative Combustion > Catalytic combustion > Rotary adsorption-concentration and combustion > Granular Carbon adsorption-concentration and combustion. Carbon Fiber Adsorption-Desorption was selected as the best available technology due to its highest weight among those technologies.

  3. Wastewater treatment and reclamation: a review of pulp and paper industry practices and opportunities

    OpenAIRE

    Hubbe, Martin A.; Metts, Jeremy R.; Hermosilla, Daphne; Angeles Blanco, M.; Yerushalmi, Laleh; Haghighat, Fariborz; Lindholm-Lehto, Petra; Khodaparast, Zahra; Kamali, Mohammadreza; Elliott, Allan

    2016-01-01

    The pulp and paper (P&P) industry worldwide has achieved substantial progress in treating both process water and wastewater, thus limiting the discharge of pollutants to receiving waters. This review covers a variety of wastewater treatment methods, which provide P&P companies with cost-effective ways to limit the release of biological or chemical oxygen demand, toxicity, solids, color, and other indicators of pollutant load. Conventional wastewater treatment systems, often comprising primary...

  4. Waste treatment: Beverage industry. (Latest citations from Food Science & Technology Abstracts (FSTA)). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The bibliography contains citations concerning waste treatment in the alcoholic and non-alcoholic beverage industries. Brewery effluent and wastewater management and disposal are reviewed. References cover aerobic treatment, sources of effluents, waste reduction, waste fermentation, effluent purification, and cost-effectiveness evaluation. The use of wastes for biogas production and for building material manufacture is examined. (Contains 50-250 citations and includes a subject term index and title list.)

  5. Batch Test Screening of Industrial Product/Byproduct Filter Materials for Agricultural Drainage Water Treatment

    Directory of Open Access Journals (Sweden)

    Barry J. Allred

    2017-10-01

    Full Text Available Filter treatment may be a viable means for removing the nitrate (NO3−, phosphate (PO43−, and pesticides discharged with agricultural drainage waters that cause adverse environmental impacts within the U.S. on local, regional, and national scales. Laboratory batch test screening for agricultural drainage water treatment potential was conducted on 58 industrial product/byproduct filter materials grouped into six categories: (1 high carbon content media; (2 high iron content media; (3 high aluminum content media; (4 surfactant modified clay/zeolite; (5 coal combustion residuals; and (6 spent foundry sands. Based on a percent contaminant removal criteria of 75% or greater, seven industrial products/byproducts were found to meet this standard for NO3− alone, 44 met this standard for PO43−, and 25 met this standard for the chlorinated triazine herbicide, atrazine. Using a 50% or greater contaminant removal criteria, five of the industrial product/byproduct filter materials exhibited potential for removing NO3−, PO43−, and atrazine together; eight showed capability for combined NO3− and PO43− removal; 21 showed capability for combined PO43− and atrazine removal; and nine showed capability for combined NO3− and atrazine removal. The results of this study delineated some potential industrial product/byproduct filter materials for drainage water treatment; however, a complete feasibility evaluation for drainage water treatment of any of these filter materials will require much more extensive testing.

  6. Biocatalytic pre-treatment processes of cotton : Industrial application of academic research

    NARCIS (Netherlands)

    Bouwhuis, G.H. (Gerrit); Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Brinks, G.J. (Ger); Warmoeskerken, van M.M.C.G. (Marijn); Warmoeskerken, van M.M.C.G. (Marijn)

    2011-01-01

    Much research effort is invested in developing enzymatic treatments of textiles by focusing on the performance of enzymes at the laboratory scale. Despite all of this work, upgrading these developments from the laboratory scale to an industrial scale has not been very successful.Nowadays,companies

  7. Organization of industrial application of academic research on biocatalytic pre-treatment processes of cotton

    NARCIS (Netherlands)

    Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Warmoeskerken, M.M.C.G. (Marijn)

    2011-01-01

    A lot of research effort is put in developing enzymatic treatment of textiles by focusing on the performance of enzymes on lab-scale. Despite all this work upgrading of these developments from lab-scale to industrial scale has not been really successful. Companies are nowadays confronted with rapid

  8. ETV REPORT: EVALUATION OF HYDROMETRICS, INC., HIGH EFFICIENCY REVERSE OSMOSIS (HERO™) INDUSTRIAL WASTEWATER TREATMENT SYSTEM

    Science.gov (United States)

    Hydrometrics, founded in 1979 and located in Helena, MT, manufactures a commercial-ready High Efficiency Reverse Osmosis (HERO™) industrial wastewater treatment system. The system uses a three-stage reverse osmosis process to remove and concentrate metals for recovery while prod...

  9. Waste Management, Treatment, and Disposal for the Food Processing Industry. Special Circular 113.

    Science.gov (United States)

    Wooding, N. Henry

    This publication contains information relating to waste prevention, treatment and disposal, and waste product utilization. Its primary purpose is to provide information that will help the food industry executive recognize waste problems and make wise management decisions. The discussion of the methods, techniques, and the state-of-the-art is…

  10. Whole effluent assessment of industrial wastewater for determination of BAT compliance. Part 2: metal surface treatment industry.

    Science.gov (United States)

    Gartiser, Stefan; Hafner, Christoph; Hercher, Christoph; Kronenberger-Schäfer, Kerstin; Paschke, Albrecht

    2010-06-01

    Toxicity testing has become a suitable tool for wastewater evaluation included in several reference documents on best available techniques of the Integrated Pollution Prevention and Control (IPPC) Directive. The IPPC Directive requires that for direct dischargers as well as for indirect dischargers, the same best available techniques should be applied. Within the study, the whole effluent assessment approach of OSPAR has been applied for determining persistent toxicity of indirectly discharged wastewater from the metal surface treatment industry. Twenty wastewater samples from the printed circuit board and electroplating industries which indirectly discharged their wastewater to municipal wastewater treatment plants (WWTP) have been considered in the study. In all factories, the wastewater partial flows were separated in collecting tanks and physicochemically treated in-house. For assessing the behaviour of the wastewater samples in WWTPs, all samples were biologically pretreated for 7 days in the Zahn-Wellens test before ecotoxicity testing. Thus, persistent toxicity could be discriminated from non-persistent toxicity caused, e.g. by ammonium or readily biodegradable compounds. The fish egg test with Danio rerio, the Daphnia magna acute toxicity test, the algae test with Desmodesmus subspicatus, the Vibrio fischeri assay and the plant growth test with Lemna minor have been applied. All tests have been carried out according to well-established DIN or ISO standards and the lowest ineffective dilution (LID) concept. Additionally, genotoxicity was tested in the umu assay. The potential bioaccumulating substances (PBS) were determined by solid-phase micro-extraction and referred to the reference compound 2,3-dimethylnaphthalene. The chemical oxygen demand (COD) and total organic carbon (TOC) values of the effluents were in the range of 30-2,850 mg L(-1) (COD) and 2-614 mg L(-1) (TOC). With respect to the metal concentrations, all samples were not heavily polluted. The

  11. Wastewater treatment in the pulp-and-paper industry: A review of treatment processes and the associated greenhouse gas emission.

    Science.gov (United States)

    Ashrafi, Omid; Yerushalmi, Laleh; Haghighat, Fariborz

    2015-08-01

    Pulp-and-paper mills produce various types of contaminants and a significant amount of wastewater depending on the type of processes used in the plant. Since the generated wastewaters can be potentially polluting and very dangerous, they should be treated in wastewater treatment plants before being released to the environment. This paper reviews different wastewater treatment processes used in the pulp-and-paper industry and compares them with respect to their contaminant removal efficiencies and the extent of greenhouse gas (GHG) emission. It also evaluates the impact of operating parameters on the performance of different treatment processes. Two mathematical models were used to estimate GHG emission in common biological treatment processes used in the pulp-and-paper industry. Nutrient removal processes and sludge treatment are discussed and their associated GHG emissions are calculated. Although both aerobic and anaerobic biological processes are appropriate for wastewater treatment, their combination known as hybrid processes showed a better contaminant removal capacity at higher efficiencies under optimized operating conditions with reduced GHG emission and energy costs. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Window modelling in Syrthes

    Energy Technology Data Exchange (ETDEWEB)

    Manias, V.; Peniguel, C. [Electricite de France, 78 - Chatou (France); Rupp, I. [Simulog, N3S, Estet, Simail, 78 - Saint Quentin en Yvelyne (France)

    1997-12-31

    Developments to take into account windows from a thermal point of view have been implemented in SYRTHES. Windows are discretized along their lateral surfaces in several independent patches. Then a one-dimensional analytical model solves the semi-transparent radiation and conduction problem occurring across the window for each patch. The spectral dependence of the absorption coefficient (`non grey` medium) is taken into account through a multi-band model. This window model is coupled with the conduction and radiation capabilities already existing in SYRTHES. When convection is taking place, it is handled by ESTET. This development will be applied to an infra-red system designed to dry paper. The simplified test case presented here consists very schematically in two cavities separated by a window (vitro-ceramic). The top cavity contains a very hot tungsten wire (the infrared source) surrounded by a tube made of quartz. The bottom cavity is where the fast moving sheet of paper will be located. Of Course the real geometry is much more complex. (authors)

  13. Evaluation of Energy Efficiency Performance of Heated Windows

    Science.gov (United States)

    Jammulamadaka, Hari Swarup

    The study about the evaluation of the performance of the heated windows was funded by the WVU Research Office as a technical assistance award at the 2014 TransTech Energy Business Development Conference to the Green Heated Glass company/project owned by Frank Dlubak. The award supports a WVU researcher to conduct a project important for commercialization. This project was awarded to the WVU Industrial Assessment Center in 2015. The current study attempted to evaluate the performance of the heated windows by developing an experimental setup to test the window at various temperatures by varying the current input to the window. The heated double pane window was installed in an insulated box. A temperature gradient was developed across the window by cooling one side of the window using gel based ice packs. The other face of the window was heated by passing current at different wattages through the window. The temperature of the inside and outside panes, current and voltage input, room and box temperature were recorded, and used to calculate the apparent R-value of the window when not being heated vs when being heated. It has been concluded from the study that the heated double pane window is more effective in reducing heat losses by as much as 50% than a non-heated double pane window, if the window temperature is maintained close to the room temperature. If the temperature of the window is much higher than the room temperature, the losses through the window appear to increase beyond that of a non-heated counterpart. The issues encountered during the current round of experiments are noted, and recommendations provided for future studies.

  14. Toxicity Evaluation of Through Fish Bioassay Raw Bulk Drug Industry Wastewater After Electrochemical Treatment

    Directory of Open Access Journals (Sweden)

    S Satyanarayan

    2011-10-01

    Full Text Available Considering the high pollution potential that the synthetic Bulk Drug industry Wastewater (BDW possesses due to the presence of variety of refractory organics, toxicity evaluation is of prime importance in assessing the efficiency of the applied wastewater treatment system and in establishing the discharge standards. Therefore, in this study the toxic effects of high strength bulk drug industry wastewater before and after electrochemical treatment on common fish Lebistes reticulatus-(peter were studied under laboratory conditions. Results indicated that wastewater being very strong in terms of color, COD and BOD is found to be very toxic to the studied fish. The LC50 values for raw wastewater and after electrochemical treatment with carbon and aluminium electrodes for 24, 48, 72 and 96 hours ranged between, 2.5-3.6%, 6.8-8.0%, 5.0-5.8% respectively. Carbon electrode showed marginally better removals for toxicity than aluminium electrode. It was evident from the studies that electrochemical treatment reduces toxicity in proportion to the removal efficiency shown by both the electrodes. The reduction in toxicity after treatment indicates the intermediates generated are not toxic than the parent compounds. Furthermore, as the electrochemical treatment did not result in achieving disposal standards it could be used only as a pre-treatment and the wastewater needs further secondary treatment before final disposal.

  15. Combined Industrial Wastewater Treatment in Anaerobic Bioreactor Posttreated in Constructed Wetland

    Science.gov (United States)

    Zeb, Bibi Saima; Mahmood, Qaisar; Jadoon, Saima; Pervez, Arshid; Irshad, Muhammad; Bilal, Muhammad; Bhatti, Zulfiqar Ahmad

    2013-01-01

    Constructed wetland (CW) with monoculture of Arundo donax L. was investigated for the posttreatment of anaerobic bioreactor (ABR) treating combined industrial wastewater. Different dilutions of combined industrial wastewater (20, 40, 60, and 80) and original wastewater were fed into the ABR and then posttreated by the laboratory scale CW. The respective removal efficiencies of COD, BOD, TSS, nitrates, and ammonia were 80%, 78–82%, 91.7%, 88–92%, and 100% for original industrial wastewater treated in ABR. ABR was efficient in the removal of Ni, Pb, and Cd with removal efficiencies in the order of Cd (2.7%) > Ni (79%) > Pb (85%). Posttreatment of the ABR treated effluent was carried out in lab scale CW containing A. donax L. CW was effective in the removal of COD and various heavy metals present in ABR effluents. The posttreatment in CW resulted in reducing the metal concentrations to 1.95 mg/L, 0 mg/L, and 0.004 mg/L for Ni, Pb, and Cd which were within the permissible water quality standards for industrial effluents. The treatment strategy was effective and sustainable for the treatment of combined industrial wastewater. PMID:24396832

  16. Combined Industrial Wastewater Treatment in Anaerobic Bioreactor Posttreated in Constructed Wetland

    Directory of Open Access Journals (Sweden)

    Bibi Saima Zeb

    2013-01-01

    Full Text Available Constructed wetland (CW with monoculture of Arundo donax L. was investigated for the posttreatment of anaerobic bioreactor (ABR treating combined industrial wastewater. Different dilutions of combined industrial wastewater (20, 40, 60, and 80 and original wastewater were fed into the ABR and then posttreated by the laboratory scale CW. The respective removal efficiencies of COD, BOD, TSS, nitrates, and ammonia were 80%, 78–82%, 91.7%, 88–92%, and 100% for original industrial wastewater treated in ABR. ABR was efficient in the removal of Ni, Pb, and Cd with removal efficiencies in the order of Cd (2.7% > Ni (79% > Pb (85%. Posttreatment of the ABR treated effluent was carried out in lab scale CW containing A. donax L. CW was effective in the removal of COD and various heavy metals present in ABR effluents. The posttreatment in CW resulted in reducing the metal concentrations to 1.95 mg/L, 0 mg/L, and 0.004 mg/L for Ni, Pb, and Cd which were within the permissible water quality standards for industrial effluents. The treatment strategy was effective and sustainable for the treatment of combined industrial wastewater.

  17. Economic evaluation of alternative wastewater treatment plant options for pulp and paper industry.

    Science.gov (United States)

    Buyukkamaci, Nurdan; Koken, Emre

    2010-11-15

    Excessive water consumption in pulp and paper industry results in high amount of wastewater. Pollutant characteristics of the wastewater vary depending on the processes used in production and the quality of paper produced. However, in general, high organic material and suspended solid contents are considered as major pollutants of pulp and paper industry effluents. The major pollutant characteristics of pulp and paper industry effluents in Turkey were surveyed and means of major pollutant concentrations, which were grouped in three different pollution grades (low, moderate and high strength effluents), and flow rates within 3000 to 10,000m(3)/day range with 1000m(3)/day steps were used as design parameters. Ninety-six treatment plants were designed using twelve flow schemes which were combinations of physical treatment, chemical treatment, aerobic and anaerobic biological processes. Detailed comparative cost analysis which includes investment, operation, maintenance and rehabilitation costs was prepared to determine optimum treatment processes for each pollution grade. The most economic and technically optimal treatment processes were found as extended aeration activated sludge process for low strength effluents, extended aeration activated sludge process or UASB followed by an aeration basin for medium strength effluents, and UASB followed by an aeration basin or UASB followed by the conventional activated sludge process for high strength effluents. Copyright © 2010 Elsevier B.V. All rights reserved.

  18. Treatment of leather industrial wastewater via combined advanced oxidation and membrane filtration.

    Science.gov (United States)

    Abdel-Shafy, Hussein I; El-Khateeb, Mohamed A; Mansour, Mona S M

    The liming/unhairing operation is among the important processes of the leather industry. It generates large amounts of effluent that are highly loaded with organic hazard wastes. Such effluent is considered one of the most obnoxious materials in the leather industry, causing serious environmental pollution and health risks. The effluent is characterized by high concentrations of the pollution parameters. Conventional chemical and/or biological treatment of such wastewater is inefficient to meet the required limits of standard specifications, due to the presence of resistant and toxic compounds. The present investigation deals with an effective treatment approach for the lime/unhair effluent using the Fenton reaction followed by membrane filtration. The experiment was extended to a laboratory pilot-scale in a continuous treatment study. In this study the raw wastewater was treated with the predetermined Fenton's optimum dose followed by membrane filtration. The wastewater was efficiently treated and the final effluent met the standards for unrestricted water reuse.

  19. Pre-treatment of high oil and grease pet food industrial wastewaters using immobilized lipase hydrolyzation.

    Science.gov (United States)

    Jeganathan, Jeganaesan; Bassi, Amarjeet; Nakhla, George

    2006-09-01

    Wastewaters generating from pet food industries contain high concentration of oil and grease (O&G), which is difficult to treat through conventional biological treatment systems. In this study, the hydrolysis of O&G originating from pet food industrial wastewater was evaluated. Candida rugosa lipase was immobilized in calcium alginate beads and applied in the hydrolysis experiment. Results showed that approximately 50% of the O&G was hydrolyzed due to the enzyme activity. A significant increment in COD and VFA production was also observed. The immobilized lipase activity was confirmed with p-nitrophenyl palmitate (pNPP) before and after O&G hydrolysis. During the 3-day experiment, approximately 65% of the beads were recovered and after the hydrolysis, approximately 70% of the enzyme activity remained in the beads. This study shows the potential of immobilized lipase as a pre-treatment step in biological treatment of pet food manufacturing wastewater.

  20. Pre-treatment of high oil and grease pet food industrial wastewaters using immobilized lipase hydrolyzation

    International Nuclear Information System (INIS)

    Jeganathan, Jeganaesan; Bassi, Amarjeet; Nakhla, George

    2006-01-01

    Wastewaters generating from pet food industries contain high concentration of oil and grease (O and G), which is difficult to treat through conventional biological treatment systems. In this study, the hydrolysis of O and G originating from pet food industrial wastewater was evaluated. Candida rugosa lipase was immobilized in calcium alginate beads and applied in the hydrolysis experiment. Results showed that approximately 50% of the O and G was hydrolyzed due to the enzyme activity. A significant increment in COD and VFA production was also observed. The immobilized lipase activity was confirmed with p-nitrophenyl palmitate (pNPP) before and after O and G hydrolysis. During the 3-day experiment, approximately 65% of the beads were recovered and after the hydrolysis, approximately 70% of the enzyme activity remained in the beads. This study shows the potential of immobilized lipase as a pre-treatment step in biological treatment of pet food manufacturing wastewater

  1. Adaptive Liquid Crystal Windows

    Energy Technology Data Exchange (ETDEWEB)

    Taheri, Bahman; Bodnar, Volodymyr

    2011-12-31

    Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft × 1ft prototype panels for the world’s first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicron’s patented e-Tint® technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of

  2. Occupants' window opening behaviour

    DEFF Research Database (Denmark)

    Fabi, Valentina; Andersen, Rune Korsholm; Corgnati, Stefano

    2012-01-01

    systems is proposed, based on studies presented in literature and a general process leading to the effects on energy consumptions is identified.Existing studies on the topic of window opening behaviour are highlighted and a theoretical framework to deal with occupants' interactions with building controls......, aimed at improving or maintaining the preferred indoor environmental conditions, is elaborated. This approach is used to look into the drivers for the actions taken by the occupants (windows opening and closing) and to investigate the existing models in literature of these actions for both residential...... and office buildings. The analysis of the literature highlights how a shared approach on identifying the driving forces for occupants' window opening and closing behaviour has not yet been reached. However, the reporting of variables found not to be drivers may reveal contradictions in the obtained results...

  3. Integrated approach to industrial sewage water treatment - a way of water resources rational use and protection

    Directory of Open Access Journals (Sweden)

    Alekseyev Evgeny

    2016-01-01

    Full Text Available Ion-exchange softening plants wash water treatment studies are provided in order to bring them back to the process. Poorly soluble Ca and Mg compounds formation conditions have been studied during the course of such water caustic treatment using the potentiometric titration method. Information has been provided about the Ca and Mg hydroxide sludge sorption properties with regard to the characteristic contaminants of the sewage water generated by the textile industry enterprise. Suitability of the hydroxide sludge has been established for use in the sewage water treatment technology in order to remove the persisting organic compounds, such as the synthetic dyes.

  4. Windows 8.1 bible

    CERN Document Server

    Boyce, Jim; Tidrow, Rob

    2014-01-01

    Windows 8.1 coverage that goes above and beyond all competitors? Serving as an evolutionary update to Windows 8, Windows 8.1 provides critical changes to parts of Windows 8, such as greater customization of the interface and boot operations, return of a 'start button' that reveals apps, greater integration between the two interfaces, and updates to apps. Weighing in at nearly 1000 pages, Windows 8.1 Bible provides deeper Windows insight than any other book on the market. It's valuable for both professionals needing a guide to the nooks and crannies of Windows and regular users wanting a wide

  5. Laboratory and Feasibility Study for Industrial Wastewater Effluents Treatment by Radiation

    International Nuclear Information System (INIS)

    Zimek, Z.; Głuszewski, W.

    2012-01-01

    The study of wastewater treatment by radiation regarding chemical processes contribution and physical-chemical separation of highly concentrated non-organic pollutants deposited in specific industrial waste are proposed. Laboratory stand should be build and the study should be performed to confirm possible mechanism of the sedimentation process of nonorganic pollutants during separation initiated by ionizing radiation. Evaluation from technical and economical point of view of this specific radiation technology and feasibility study preparation for industrial facility will be the main output at the final stage of the project. (author)

  6. Research and development activities for radioactive wastes treatment. Developing technologies of Kawasaki Heavy Industries, Ltd

    International Nuclear Information System (INIS)

    Adachi, Junichi; Ozawa, Tamotsu; Ikemoto, Yoshikazu; Yamazaki, Seiichiro; Minami, Ryogo

    1995-01-01

    Kawasaki Heavy Industries, Ltd. has been performing the research and development activities for radioactive wastes treatment in parallel with the design and fabrication of the nuclear facilities and components since the construction of the Tokai No.1 power station of JAPCO. Main technologies developed by Kawasaki Heavy Industries, Ltd. in the field of radwaste management are for dismantling and cutting, compacting and melting, and storage. This paper describes a summary of the present status and future plan of the above-mentioned technologies. (author)

  7. Windows Deployment Services : Esiasennuspalvelin

    OpenAIRE

    Ahonen, Arto

    2010-01-01

    Opinnäytetyöni aiheena on Windows Deployment Services, jonka tarkoituksena on toimia esiasennus-palvelimena Windows-käyttöjärjestelmien levykuvien jakamiseen sekä asentamiseen. Opinnäytetyö to-teutettiin yhteistyössä Concept.10 IT:n ja tuotannon kanssa. Concept.10:n tuotannon lähtökohtana on valmistaa ja asentaa Suomen markkinoille tietokonelaitteistoja ohjelmistoineen ja tukipalveluineen. Tuo-tantoon olennaisena osana kuuluu esiasennuspalvelin, jolla voidaan asentaa useita tietokoneita samaa...

  8. Microsoft Windows networking essentials

    CERN Document Server

    Gibson, Darril

    2011-01-01

    The core concepts and technologies of Windows networking Networking can be a complex topic, especially for those new to the field of IT. This focused, full-color book takes a unique approach to teaching Windows networking to beginners by stripping down a network to its bare basics, thereby making each topic clear and easy to understand. Focusing on the new Microsoft Technology Associate (MTA) program, this book pares down to just the essentials, showing beginners how to gain a solid foundation for understanding networking concepts upon which more advanced topics and technologies can be built.

  9. Windows Azure Platform

    CERN Document Server

    Redkar, Tejaswi

    2010-01-01

    The Azure Services Platform is a brand-new cloud-computing technology from Microsoft. It is composed of four core components-Windows Azure, .NET Services, SQL Services, and Live Services-each with a unique role in the functioning of your cloud service. It is the goal of this book to show you how to use these components, both separately and together, to build flawless cloud services. At its heart Windows Azure Platform is a down-to-earth, code-centric book. This book aims to show you precisely how the components are employed and to demonstrate the techniques and best practices you need to know

  10. Microsoft Windows Security Essentials

    CERN Document Server

    Gibson, Darril

    2011-01-01

    Windows security concepts and technologies for IT beginners IT security can be a complex topic, especially for those new to the field of IT. This full-color book, with a focus on the Microsoft Technology Associate (MTA) program, offers a clear and easy-to-understand approach to Windows security risks and attacks for newcomers to the world of IT. By paring down to just the essentials, beginners gain a solid foundation of security concepts upon which more advanced topics and technologies can be built. This straightforward guide begins each chapter by laying out a list of topics to be discussed,

  11. The Process of Coagulation, Flocculation and Advanced Oxidation in Effluent Treatment of Second Refinery Oil Industries

    Directory of Open Access Journals (Sweden)

    AR Yari

    2012-07-01

    Full Text Available

    Background and Objectives: One of the industries dependent on oil compounds that play an important role in economy, preserve resources and oil reserves, as well as environmental protection is the secondary refinery Oil industries. The efficiency of Coagulation, flocculation and advanced oxidation process in the Effluent treatment industry was studied.

     

    Methods: This study is a descriptive- quasi-experimental that effluent pollution quality measured with COD. Physicochemical processes of coagulation, flocculation, by using conventional coagulants and oxidation with ozone for the removal to access environmental discharge effluent standards were studied. Coagulants such as aluminum sulfate, ferric chloride, sodium silicate, poly aluminum chloride were evaluated. Jartest was used to determine the efficiency of coagulation and flocculation. Samples were collected from Salafchegan industrial district in Qom. Examination methods were extracted from Standard methods for water and wastewater examination.

     

    Results: Initial experiments showed that BOD, indicating biological treatment wastewater, in comparison with COD, indicating chemical oxygen demand of wastewater is very low. Thus, the application of biological processes of effluent treatment without using chemical processes, not performance and not economic. The experiment showed that the amount of COD in raw effluent was varied from 38000 to 78000mg/l.

    Using advanced oxidation with O3 in pH=11.5 can reach 77.5% and in pH=9 in 57.2 and in pH=3.25 in 21.3 COD removal efficiency respectively.

     

    Conclusion: According to the results, advanced oxidation process prior to biological effluent treatment of the second refinery oil industries is effective in eliminating pollutants and toxic substances.

     

  12. Process water treatment in Canada's oil sands industry : 2 : a review of emerging technologies

    International Nuclear Information System (INIS)

    Allen, E.W.

    2008-01-01

    This review was conducted to identify candidate treatment technologies for treating oil sands process water. The oil sands industry in Canada uses large volumes of fresh water in order to extract bitumen deposits. The development of process water treatment technologies has become a critical issue for the industry, particularly as oil sand production is expected to triple in the next decade. However, treatment technologies must be adapted to consider the fouling potential of bitumens and fine clays as well as the effect of alkaline process water on treatment performance. The review included developments in chemical modifications to membranes and adsorbents designed to improve pollutant removal and reduce fouling; hybridization technologies designed to enhance the biological treatment of toxic feedwaters; recent advances in photocatalytic oxidation technologies for organic compounds; and new designs for large-scale treatment wetlands for polluted waste waters. It was concluded that major knowledge gaps must be optimized and preliminary studies must be conducted in order to understand how the treatment technologies will be affected by the chemical and physical characteristics of oil sands process water. 188 refs., 8 tabs

  13. Toxicity evaluation of wastewater collected at different treatment stages from a pharmaceutical industrial park wastewater treatment plant.

    Science.gov (United States)

    Ma, Ke; Qin, Zhe; Zhao, Zhongqing; Zhao, Chunxia; Liang, Shuxuan

    2016-09-01

    The toxicity of water-receiving bodies, the effluent and other treatment stages in wastewater treatment plants has recently been of interest to the public due to the lack of a regulated toxicity-based index for wastewater discharge in China. This study aimed to evaluate the conventional pollution parameters and toxicities of wastewaters collected at different treatment stages from a pharmaceutical industrial park wastewater treatment plant through dehydrogenase activity (DHA) and bioluminescent bacteria (Vibrio qinghaiensis) tests. The results of an analysis of conventional parameters indicated that the total suspended solids (TSS), chemical oxygen demand (COD), total nitrogen (TN), ammonia nitrogen (NH3N), and total phosphorus (TP) were largely removed after various treatments. However, the TN, NH3N and COD still exceeded the regulated standards. The tested pharmaceutical park effluents were mainly polluted with organic pollutants and nitrogenous. The toxicity test results indicated that the toxicities could be markedly reduced after treatment, with the toxicities of two out of the six effluent samples at different treatment stages being greater than the influent toxicity. Spearman's rank correlation coefficients indicated a significantly positive correlation between the toxicity values obtained using the DHA and Vibrio qinghaiensis tests. Compared with the DHA measurement, the Vibrio qinghaiensis test was faster and more sensitive. Meanwhile, the toxicity indicators were significantly and positively correlated with the TSS, TN, TP and COD concentrations. These results may aid the understanding of the toxicity of pharmaceutical industrial park wastewaters and toxicity removal using the treatment techniques that are currently utilized in China. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. The plant-window system

    International Nuclear Information System (INIS)

    Wood, R.T.; Mullens, J.A.; Naser, J.A.

    1995-01-01

    Power plant data, and the information that can be derived from it, provide the link to the plant through which the operations, maintenance and engineering staff understand and manage plant performance. The increasing use of computer technology in the U.S. nuclear power industry has greatly expanded the capability to obtain, analyze, and present data about the plant to station personnel. However, it is necessary to transform the vast quantity of available data into clear, concise, and coherent information that can be readily accessed and used throughout the plant. This need can be met by an integrated computer workstation environment that provides the necessary information and software applications, in a manner that can be easily understood and used, to the proper users throughout the plant. As part of a Cooperative Research and Development Agreement with the Electric Power Research Institute, the Oak Ridge National Laboratory has developed functional requirements for a Plant-Wide Integrated Environment Distributed On Workstations (Plant-Window) System. The Plant-Window System (PWS) can serve the needs of operations, engineering, and maintenance personnel at nuclear power stations by providing integrated data and software applications (e.g., monitoring, analysis, diagnosis, and control applications) within a common environment. The PWS requirements identify functional capabilities and provide guidelines for standardized hardware, software, and display interfaces to define a flexible computer environment that permits a tailored implementation of workstation capabilities and facilitates future upgrades

  15. Decontamination of industrial wastewater from sugarcane crops by combining solar photo-Fenton and biological treatments.

    Science.gov (United States)

    Mendoza-Marín, Claudia; Osorio, Paula; Benítez, Norberto

    2010-05-15

    The department of Valle del Cauca is the region with the largest sugarcane production in Colombia. This agricultural activity uses high quantities of herbicides, mainly Diuron and 2,4-Dichlorophenoxyacetic acid. Wastewater generated in the washing process of spray equipment and empty pesticide containers must be treated to keep natural water sources from being polluted with these pesticides when these effluents are disposed off. Conventional biological treatments are not able to remove recalcitrant substances like Diuron and 2,4-Dichlorophenoxyacetic acid; therefore, it is essential to have alternative treatment systems. In recent years, photocatalytic processes have been proven efficient methods in treating polluted water with recalcitrant organic substances. This study sought to evaluate the efficiency of a coupled treatment constituted for a solar photo-Fenton treatment and a biological system like an immobilized biological reactor to treat industrial wastewater containing pesticides (2,4-Dichlorophenoxyacetic acid and Diuron). The mineralization and degradation of pesticides were followed by measuring the dissolved organic carbon and pesticide concentrations. The results revealed that industrial wastewaters with high Diuron and 2,4-Dichlorophenoxyacetic acid concentrations can be successfully treated by a combined solar photo-Fenton-biological system, achieving mineralization of 79.8% in prepared wastewater and 82.5% in real industrial wastewater by using low Fe(2+) and H(2)O(2) concentrations. Copyright (c) 2010 Elsevier B.V. All rights reserved.

  16. Decontamination of industrial wastewater from sugarcane crops by combining solar photo-Fenton and biological treatments

    International Nuclear Information System (INIS)

    Mendoza-Marin, Claudia; Osorio, Paula; Benitez, Norberto

    2010-01-01

    The department of Valle del Cauca is the region with the largest sugarcane production in Colombia. This agricultural activity uses high quantities of herbicides, mainly Diuron and 2,4-Dichlorophenoxyacetic acid. Wastewater generated in the washing process of spray equipment and empty pesticide containers must be treated to keep natural water sources from being polluted with these pesticides when these effluents are disposed off. Conventional biological treatments are not able to remove recalcitrant substances like Diuron and 2,4-Dichlorophenoxyacetic acid; therefore, it is essential to have alternative treatment systems. In recent years, photocatalytic processes have been proven efficient methods in treating polluted water with recalcitrant organic substances. This study sought to evaluate the efficiency of a coupled treatment constituted for a solar photo-Fenton treatment and a biological system like an immobilized biological reactor to treat industrial wastewater containing pesticides (2,4-Dichlorophenoxyacetic acid and Diuron). The mineralization and degradation of pesticides were followed by measuring the dissolved organic carbon and pesticide concentrations. The results revealed that industrial wastewaters with high Diuron and 2,4-Dichlorophenoxyacetic acid concentrations can be successfully treated by a combined solar photo-Fenton-biological system, achieving mineralization of 79.8% in prepared wastewater and 82.5% in real industrial wastewater by using low Fe 2+ and H 2 O 2 concentrations.

  17. Decontamination of industrial wastewater from sugarcane crops by combining solar photo-Fenton and biological treatments

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza-Marin, Claudia; Osorio, Paula [Department of Chemistry, Faculty of Science, Universidad del Valle, A.A. 25360 Cali (Colombia); Benitez, Norberto, E-mail: lubenite@univalle.edu.co [Department of Chemistry, Faculty of Science, Universidad del Valle, A.A. 25360 Cali (Colombia)

    2010-05-15

    The department of Valle del Cauca is the region with the largest sugarcane production in Colombia. This agricultural activity uses high quantities of herbicides, mainly Diuron and 2,4-Dichlorophenoxyacetic acid. Wastewater generated in the washing process of spray equipment and empty pesticide containers must be treated to keep natural water sources from being polluted with these pesticides when these effluents are disposed off. Conventional biological treatments are not able to remove recalcitrant substances like Diuron and 2,4-Dichlorophenoxyacetic acid; therefore, it is essential to have alternative treatment systems. In recent years, photocatalytic processes have been proven efficient methods in treating polluted water with recalcitrant organic substances. This study sought to evaluate the efficiency of a coupled treatment constituted for a solar photo-Fenton treatment and a biological system like an immobilized biological reactor to treat industrial wastewater containing pesticides (2,4-Dichlorophenoxyacetic acid and Diuron). The mineralization and degradation of pesticides were followed by measuring the dissolved organic carbon and pesticide concentrations. The results revealed that industrial wastewaters with high Diuron and 2,4-Dichlorophenoxyacetic acid concentrations can be successfully treated by a combined solar photo-Fenton-biological system, achieving mineralization of 79.8% in prepared wastewater and 82.5% in real industrial wastewater by using low Fe{sup 2+} and H{sub 2}O{sub 2} concentrations.

  18. Electrocoagulation for the treatment of textile industry effluent--a review.

    Science.gov (United States)

    Khandegar, V; Saroha, Anil K

    2013-10-15

    Various techniques such as physical, chemical, biological, advanced oxidation and electrochemical are used for the treatment of industrial effluent. The commonly used conventional biological treatment processes are time consuming, need large operational area and are not effective for effluent containing toxic elements. Advanced oxidation techniques result in high treatment cost and are generally used to obtain high purity grade water. The chemical coagulation technique is slow and generates large amount of sludge. Electrocoagulation has recently attracted attention as a potential technique for treating industrial effluent due to its versatility and environmental compatibility. This technique uses direct current source between metal electrodes immersed in the effluent, which causes the dissolution of electrode plates into the effluent. The metal ions, at an appropriate pH, can form wide range of coagulated species and metal hydroxides that destabilize and aggregate particles or precipitate and adsorb the dissolved contaminants. Therefore, the objective of the present manuscript is to review the potential of electrocoagulation for the treatment of industrial effluents, mainly removal of dyes from textile effluent. © 2013 Elsevier Ltd. All rights reserved.

  19. Constructed wetlands in the treatment of agro-industrial wastewater: A review

    Directory of Open Access Journals (Sweden)

    Sultana Mar-Yam

    2015-01-01

    Full Text Available Due to their simplicity and low operation cost, constructed wetlands are becoming more prevalent in wastewater treatment all over the world. Their range of applications is no longer limited to municipal wastewater but has expanded to the treatment of heavily polluted wastewaters such as agro-industrial effluents. This paper provides a comprehensive literature review of the application of constructed wetlands in treating a variety of agro-industrial wastewaters, and discusses pollutant surface loads and the role of constructed wetland type, prior-treatment stages and plant species in pollutant removal efficiency. Results indicate that constructed wetlands can tolerate high pollutant loads and toxic substances without losing their removal ability, thus these systems are very effective bio-reactors even in hostile environments. Additionally, the review outlines issues that could improve pollutant treatment efficiency and proposes design and operation suggestions such as suitable vegetation, porous media and constructed wetland plain view. Finally, a decision tree for designing constructed wetlands treating agro-industrial wastewaters provides an initial design tool for scientists and engineers.

  20. Characteristics and Biodegradability of Wastewater Organic Matter in Municipal Wastewater Treatment Plants Collecting Domestic Wastewater and Industrial Discharge

    OpenAIRE

    Yun-Young Choi; Seung-Ryong Baek; Jae-In Kim; Jeong-Woo Choi; Jin Hur; Tae-U Lee; Cheol-Joon Park; Byung Joon Lee

    2017-01-01

    Municipal wastewater treatment plants (WWTPs) in Korea collect and treat not only domestic wastewater, but also discharge from industrial complexes. However, some industrial discharges contain a large amount of non-biodegradable organic matter, which cannot be treated properly in a conventional biological WWTP. This study aimed to investigate the characteristics and biodegradability of the wastewater organic matter contained in the industrial discharges and to examine the fate of the industri...

  1. "Stained Glass" Landscape Windows

    Science.gov (United States)

    Vannata, Janine

    2008-01-01

    Both adults and children alike marvel at the grand vivid stained-glass windows created by American artist Louis Comfort Tiffany. Today he is commonly recognized as one of America's most influential designers and artists throughout the last nineteenth and early twentieth century. In the lesson described in this article, students created their own…

  2. Exploring Shop Window Displays

    Science.gov (United States)

    Christopoulou, Martha

    2011-01-01

    Using visual resources from everyday life in art lessons can enrich students' knowledge about the creation of visual images, artifacts, and sites, and develop their critical understanding about the cultural impact of these images and their effects on people's lives. Through examining an exhibition in the windows of Selfridges department store in…

  3. Opening the Literature Window

    Science.gov (United States)

    Jago, Carol

    2012-01-01

    Great literature gives students a window to other places and times, but it often requires students to step outside their comfort zones and take on challenges they wouldn't usually attempt. Unfortunately, research shows that many schools are not assigning literature that pushes students beyond their current reading level. Jago encourages teachers…

  4. Simple cryogenic infrared window

    NARCIS (Netherlands)

    Hartemink, M.; Hartemink, M.; Godfried, H.P; Godfried, Herman

    1991-01-01

    A simple, cheap technique is reported that allows materials with both large and small thermal expansion coefficients to be mounted as windows in low temperature cryostats while at the same time avoiding thermal stresses. The construction may be thermally cycled many times with no change in its

  5. Fenton's peroxidation and coagulation processes for the treatment of combined industrial and domestic wastewater.

    Science.gov (United States)

    Badawy, M I; Ali, M E M

    2006-08-25

    As a consequence of the population growth, major efforts have been made by the Egyptian government to construct new industrial areas. Tenth of Ramadan City is one of the most important industrial cities in Egypt. The wastewater generated from various industrial activities was highly contaminated with organic matters as indicated by COD (1750-3323 mg/L), TSS (900-3000 mg/L) and oil and grease (13.2-95.5 mg/L). All overall appraisals of the analytical data from the industrial wastewater indicate that pretreatment is required for all industrial sectors to achieve compliance with the Egyptian Environmental law which requires effective pretreatment of industrial wastewater prior to its discharge into public sewers. Treatability studies via conventional and Fenton processes have been investigated. The efficiency of conventional treatment methods led to 63% COD and 44% color removal by using FeCl(3) as coagulant. Various coagulant aids and powdered activated carbon (PAC) were added to 400mg/L FeCl(3) in order to enhance the removal of color. It was found that polyacrylamide polymer, bentonite and PAC increased the efficiency of the treatments where the color removal increased to 79%, by cationic polymer, 73% by anionic polymer, 84.5% by bentonite and 95% for 0.4 g/L PAC. Fenton process was investigated which under the operating conditions (pH 3.0+/-0.2, Fe(2+) dose=400 mg/L and H(2)O(2)=550 mg/L), color removal up to 100% and more than 90% of COD removal were achieved.

  6. Purification and treatment of industrial wastewater by electron beam process: it's potential and effectiveness evaluation

    International Nuclear Information System (INIS)

    Zulkafli Ghazali; Khomsaton Abu Bakar; Ting Teo Ming; Siti Aiasah Hashim; Khairul Zaman Mohd Dahlan

    2002-01-01

    Demand for water has grown dramatically globally. We have seen how acute is the demand for treated water in Malaysia during dry spell of late. Between 1900 and 1995, water consumption increased by over six times, globally, more than double the rate of population growth. This rapid growth in water demand is due to the increasing reliance on irrigation to achieve food security, the growth of industries, and the increasing use for domestic purposes. Given the seriousness of the situation and future risk of crises, there is an urgent need to develop the water-efficient technologies including economical treatment methods of wastewater and polluted water. Electron beam treatment (E-Beam treatment) is a comparatively new method of wastewater purification. E-beam treatment is also an environment-friendly approach for the cleanup of contaminated groundwater and industrial wastewater. E-beam treatment treats multi-components waste streams and does not require any hazardous chemical additives nor does it create any secondary wastes. It uses fast formation of short-lived reactive particles, which are capable of efficient decomposition of pollutants inside wastewater. This paper highlights the practical treatment of wastewater using E-Beam method that gives essential conveniences and advantages of the followings: - strongest reducing and oxidizing agents; - universality and interchangeability of redox agents; - variety of paths for pollutant conversion; - process controllability; - wide choice of equipment and technological regimes; - compatibility with conventional methods. (Author)

  7. Anaerobic sequencing batch reactor in pilot scale for treatment of tofu industry wastewater

    Science.gov (United States)

    Rahayu, Suparni Setyowati; Purwanto, Budiyono

    2015-12-01

    The small industry of tofu production process releases the waste water without being processed first, and the wastewater is directly discharged into water. In this study, Anaerobic Sequencing Batch Reactor in Pilot Scale for Treatment of Tofu Industry was developed through an anaerobic process to produce biogas as one kind of environmentally friendly renewable energy which can be developed into the countryside. The purpose of this study was to examine the fundamental characteristics of organic matter elimination of industrial wastewater with small tofu effective method and utilize anaerobic active sludge with Anaerobic Sequencing Bath Reactor (ASBR) to get rural biogas as an energy source. The first factor is the amount of the active sludge concentration which functions as the decomposers of organic matter and controlling selectivity allowance to degrade organic matter. The second factor is that HRT is the average period required substrate to react with the bacteria in the Anaerobic Sequencing Bath Reactor (ASBR).The results of processing the waste of tofu production industry using ASBR reactor with active sludge additions as starter generates cumulative volume of 5814.4 mL at HRT 5 days so that in this study it is obtained the conversion 0.16 L of CH4/g COD and produce biogas containing of CH4: 81.23% and CO2: 16.12%. The wastewater treatment of tofu production using ASBR reactor is able to produce renewable energy that has economic value as well as environmentally friendly by nature.

  8. Regularity of Dual Gabor Windows

    Directory of Open Access Journals (Sweden)

    Ole Christensen

    2013-01-01

    Full Text Available We present a construction of dual windows associated with Gabor frames with compactly supported windows. The size of the support of the dual windows is comparable to that of the given window. Under certain conditions, we prove that there exist dual windows with higher regularity than the canonical dual window. On the other hand, there are cases where no differentiable dual window exists, even in the overcomplete case. As a special case of our results, we show that there exists a common smooth dual window for an interesting class of Gabor frames. In particular, for any value of K∈ℕ, there is a smooth function h which simultaneously is a dual window for all B-spline generated Gabor frames {EmbTnBN(x/2}m,n∈ℕ for B-splines BN of order N=1,…,2K+1 with a fixed and sufficiently small value of b.

  9. ECOLOGICAL LIFE CYCLE ASSESSMENT OF MODIFIED NOVOLAKS WASTE USED IN INDUSTRIAL WASTEWATER TREATMENT

    Directory of Open Access Journals (Sweden)

    Wioletta M. BAJDUR

    2017-06-01

    Full Text Available Ecological Life Cycle Assessment (LCA applied in the assessment of the impact of products on the environment is a technique that allows for the evaluation of the environmental impact of polymeric flocculants used in industrial wastewater treatment. The possibility of conducting a full life cycle and thus manufacturing process analysis allows for reliable and accurate identification of the sources of environmental hazards and the impact of new products on the environment. Newly synthesized waste-based polymers are water soluble and possess the properties of flocculants, while reducing the parameters in industrial wastewater. In the paper, there are presented the results of the analysis conducted using LCA technique for the assessment of the impact of modified waste phenol formaldehyde resin (Novolak on the environment. LCA technique was used to assess the impact of the new flocculant applied in the process of metallurgical wastewater treatment taking into account the environmental impact of the flocculant manufacturing process.

  10. Integrating the Anaerobic Process with Ultrafiltration in Meat Industry Wastewater Treatment

    Directory of Open Access Journals (Sweden)

    Kwarciak-Kozłowska Anna

    2014-12-01

    Full Text Available The aim of this paper was to study meat industry wastewater treatment efficiency during fermentation process in ASBR reactor and post-treatment in UF process. The anaerobic process obtained a considerable degree of the removal of organic pollutants from raw wastewater designated as COD (73.3%, BOD (71.4% and TOC (83.2%. The concentrations of COD and BOD were 435 and 443 mg/dm3, respectively. The value of TOC reached a level of 136 mg/dm3. Generated biogas in the methane fermentation process of wastewater from meat industry plants was characterized by high methane content (80.9% vol.. In the final part of the experiment, the UF process was used in order to post-treating effluent from ASBR reactor. During the UF process, COD, BOD and TOC parameters were removed at 67.2%, 68% and 70.4%, respectively.

  11. Industrial process water treatment and reuse: A framework for synthesis and design

    DEFF Research Database (Denmark)

    Quaglia, Alberto; Pennati, Alessandra; Bogataj, Milos

    2014-01-01

    of this approach is still limited to motivating examples lacking the ability to handle problems with complexity of industrial relevance. To address this challenge, in this contribution, we focus on the integration of wastewater engineering concepts and models, together with optimization methods and solution...... algorithms. To this end, we propose a computer-aided framework for the design of water treatment and reuse networks. In the framework, optimization methods, problem analysis tools and wastewater engineering knowledge are integrated in a computer-aided environment, in order to facilitate the formulation...... and solution of the design problems with fair complexity representative of industrial applications. The framework is demonstrated through the solution of a case study dealing with the treatment and reuse of water effluent produced by an oil refinery. The problem is solved, and a win−win solution is identified...

  12. Evaluation of Wastewater Treatment of Detergent Industry Using Coagulation Procession Pilot Scale

    Directory of Open Access Journals (Sweden)

    MR Shahmansouri

    2005-04-01

    Full Text Available Introduction: Surfactant or surface active agents are slightly soluble in water and cause foaming in waste treatment plants and also in the surface waters into which the waste effluent is discharged. During aeration of wastewater, these compounds collect on the surface of the water bubbles and create some problems in waste treatment. Methods: In this study, surfactant, turbidity and COD in the industrial wastewater of the company, Paksan was studied. Study was done at pH ranging between 2 and 13 in a pilot scale process. Results: The results showed that ferric chloride has higher efficiency in removal and it is possible to decrease the surfactant, turbidity and COD Conclusion: The efficiency of ferric chloride in coagulation process for removal of surfactant, turbidity and COD from industrial wastewater is better than ALUM, Lime and Ferric Sulfate,

  13. Treatment of industrial effluents using electron beam accelerator and adsorption with activated carbon. A comparative study

    International Nuclear Information System (INIS)

    Las Casas, Alexandre

    2004-01-01

    Several methods are used In the pollutant removal from Industrial and domestic wastewater. However when the degradation of toxic organic pollutants, mainly the recalcitrant is objectified, the conventional treatments usually do not meet the desirable performance in the elimination or decrease the impact when the effluent are released to the environment what takes to the research of alternative methods that seek the improvement of the efficiency of the wastewater treatment systems jointly employees or separately. This work presents a study of degradation/removal of pollutants organic compounds comparing two methods using radiation from industrial electron beam and granular activated carbon (GAC). The removal efficiency of the pollutants was evaluated and it was verified that the efficiency of adsorption with activated carbon is similar to the radiation method. The obtained results allowed to evaluated the relative costs of these methods. (author)

  14. Treatment of organized industrial zone wastewater by MBR: First results for KOIZ

    OpenAIRE

    Özkan, Oktay; Uyanık, İbrahim; Rençber, Mehmet Mükerrem; Oğuz, Merve; Şahin, Uğur; Koyuncu, İsmail

    2018-01-01

    Organized industrial zones (OIZs) in Turkeysolve their wastewater problems by collecting and treating the wastewater usingsome traditional methods (mostly biological) to achieve discharge standards.However, new solutions for water reclamations are needed for the limited watersources, increasing pollution loads to the receiving environments and waterbasins. Membrane bioreactors (MBRs) have recently become more preferable due totheir advantages over the conventional treatment methods by their d...

  15. Remediation of effluents from paper and cellulose industry: biological and photocatalytic treatment

    OpenAIRE

    Peralta-Zamora, P.; Esposito, E.; Reyes, J.; Durán, N.

    1997-01-01

    The contribution of the industrial activities to the environmental contamination phenomena is evident. Great efforts are dedicated to the establishment of methodologies which permits an adequate treatment of the produced effluents, as a manner of minimizing the environmental impact of these wastes. The methodologies based on photocatalytic processes are very promise alternatives, because permits degradation of a great number of chemical substances of high toxic potential, without the use of o...

  16. A Photocatalytic Rotating Disc Reactor with TiO₂ Nanowire Arrays Deposited for Industrial Wastewater Treatment.

    Science.gov (United States)

    Li, Fang; Szeto, Wai; Huang, Haibao; Li, Jiantao; Leung, Dennis Y C

    2017-02-22

    A photocatalytic rotating disc reactor (PRD-reactor) with TiO₂ nanowire arrays deposited on a thin Ti plate is fabricated and tested for industrial wastewater treatment. Results indicate that the PRD-reactor shows excellent decolorization capability when tested with methyl orange (>97.5%). Advanced oxidation processes (AOP), including photocatalytic oxidation and photolytic reaction, occurred during the processing. Efficiency of the AOP increases with reduction in light absorption pathlength, which enhanced the photocatalytic reaction, as well as by increasing oxygen exposure of the wastewater thin film due to the rotating disc design. It is found that, with a small dosage of hydrogen peroxide, the mineralization efficiency of industrial biodegraded wastewater can be enhanced, with a superior mineralization of >75% total organic carbon (TOC) removal. This is due to the fact that the TiO₂ photocatalysis and hydrogen peroxide processes generate powerful oxidants (hydroxyl radicals) that can strongly improve photocatalytic oxidation efficiency. Application of this industrial wastewater treatment system is benefited from the TiO₂ nanowire arrays, which can be fabricated by a mild solvothermal method at 80 °C and under atmospheric pressure. Similar morphologies and microstructures are found for the TiO₂ nanowire arrays deposited on a large metal Ti disc, which makes the wastewater treatment process more practical and economical.

  17. [Evaluation of treatment technology of odor pollution source in petrochemical industry].

    Science.gov (United States)

    Mu, Gui-Qin; Sui, Li-Hua; Guo, Ya-Feng; Ma, Chuan-Jun; Yang, Wen-Yu; Gao, Yang

    2013-12-01

    Using an environmental technology assessment system, we put forward the evaluation index system for treatment technology of the typical odor pollution sources in the petroleum refining process, which has been applied in the assessment of the industrial technology. And then the best available techniques are selected for emissions of gas refinery sewage treatment plant, headspace gas of acidic water jars, headspace gas of cold coke jugs/intermediate oil tank/dirty oil tank, exhaust of oxidative sweetening, and vapors of loading and unloading oil.

  18. Physico-chemical treatment of liquid waste on an industrial plant for electrocoagulation.

    Science.gov (United States)

    Mlakar, Matej; Levstek, Marjetka; Stražar, Marjeta

    2017-10-01

    Wastewater from washing, oil separators, the metal processing and detergent industries, was tested and treated for treatment of different types of liquid waste at industrial level at Domžale-Kamnik Wastewater Treatment Plant (WWTP). The effect of implementing the electrocoagulation (EC) and flotation processes, respectively, is analysed and includes the duration of the EC implementation, voltage, number of electrodes, and chemical addition, as well as the pH effect and conductivity. The tests were performed not only on various types of liquid waste, but also on different mixtures of liquid waste. Laboratory analysis of the samples before and after EC have shown an effective reduction not only in organic loads in accordance with the COD (chemical oxygen demand) parameter, but also in mineral oil content, toxic metal concentration, and surfactants. The COD in liquid waste from the detergent industry was reduced by 73% and the content of surfactants by 64%. In liquid waste from the metal processing industry, the COD decreased by up to 95%, while the content of toxic metals decreased from 59 to 99%. Similar phenomena were shown in liquid waste from oil separators, where the COD was reduced to 33% and the concentration of mineral oils by 99%. Some of the liquid wastes were mixed together in the ratio 1:1, thus allowing testing of the operation of EC technology in heterogeneous liquid waste, where the final result proved to be effective cleaning as well. After treatment in the process of EC, the limit values of the treated water proved appropriate for discharge into the sewerage system.

  19. Studies of toxic metals removal in industrial wastewater after electron-beam treatment

    International Nuclear Information System (INIS)

    Ribeiro, Marcia Almeida

    2002-01-01

    The Advanced Oxidation Process, using electron-beam, have been studied by scientific community due to its capacity to mineralize the toxic organic compound from highly reactive radical's formation. The electron-beam treatment process has been adopted by several countries for organic compounds removal and to effluents and sewers biological degradation. In this work, studies of metals removal in the simulated aqueous solutions and in the actual industrial effluents were carried out, using electron-beam treatment. The effluents samples were collected at ETE/SABESP (Governmental Wastewater Treatment Plant) in Suzano, SP city. The sampling was outlined at three distinctive sites: Industrial Receiver Unit, Medium Bar, and Final Effluent. The effluents samples were irradiated using different irradiation doses (20, 50, 100, 200 and 500 kGy). The removal behavior of metals Ca, CI, S, P, K, Al, Fe, As, Ni, Cr, Zn, Si, Co, Mn, As, Se, Cd, Hg and Pb was verified. The elements determination was accomplished with the x-ray fluorescence (WD-XRFS) technique using Fundamental Parameters method and thin film samples. The elements Fe, Zn, Cr and Co presented a removal > 99% to 200 kGy of irradiation dose in industrial effluent. At the same dose, P, Al and Si presented a removal of 81.8%, 97.6% and 98.7%, respectively. Ca and S were removed more than 80% at 20 kGy and Na, CI and K did not presented any degree of removal. As, Se, Cd, Hg and Pb removal was studied in the simulated aqueous solutions and industrial effluents with scavengers addition (EDTA and HCOONa). The elements As and Hg presented a removal of 92% and 99%, respectively, with HCOONa, at 500 kGy irradiation dose. The Se presented a 96.5% removal at same irradiation dose without scavengers addition. The removal of Cd and Pb did not give a significant removal, once all of the assay were carried out in the oxidant medium. (author)

  20. Daylight Redirecting Window Films

    Science.gov (United States)

    2013-09-01

    The open office area (Figure 9) is 48’ deep with a sloped ceiling designed to disperse light down into the cubicle workstations. The sloped ceiling...Ceiling Ht. 9’ , 10’* Window VT 40%, 70%* Office Furniture 60” Cubicle * Lighting Schedule ASHRAE 90.1* Blinds Control Always Closed, Automated...2829 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) ESTCP Program Office Dr. James

  1. Windows with improved energy performances

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2003-01-01

    Heat loss through windows represents a considerable part of the total heat loss from houses. However, apart from providing daylight access and view, windows offer a unique potential for solar gain to be exploited during the heating season. Until now valuation of the energy performance of windows...... has primary focused on the heat loss coefficient, U-value. However, as the U-value, especially for the glazing part, has improved considerably during the last years, the total solar energy transmittance, g-value, has become equally important to the total energy performance of windows. Improved energy...... performance of windows can be reached by development of each element of the window, but to gain a considerable improvement in the overall energy performance all elements of the windows need to be examined together and the construction optimised. This paper describes potential improvements of window elements...

  2. Laboratory-scale trials of electrolytic treatment on industrial wastewaters: microbiological aspects.

    Science.gov (United States)

    Zanardini, E; Valle, A; Gigliotti, C; Papagno, G; Ranalli, G; Sorlini, C

    2002-09-01

    Animal, civil and industrial waste matter is a source of potential chemical, microbiological and air pollutants. In populated areas the presence of faecal bacteria and the production of malodorous compounds during waste storage and in the tanks of wastewater treatment plants, can cause concern. The general aim of the work was to study electrolytic waste treatment (recently applied on animal slurry) using low electric current across graphite and copper electrodes, determining its effect on the microflora of sludge, collected from the equalisation basin of an industrial aerobic wastewater treatment plant, and on odour emission abatement. Biochemical and enzymatic indicators like ATP content and a pool of 19 enzymatic activities were tested, comparing them with viable cell counts by traditional microbiological methods, to verify the validity of such indicators in monitoring the electrolytic treatment and to assess their correlation with odour reduction. The preliminary results of our laboratory-scale trials showed that in the presence of inert electrodes, such as graphite, metabolic activity is stimulated, whereas with copper electrodes the ATP content and some enzymatic activities are inhibited quite considerably after only four days, this being accompanied by a marked reduction in odour. Consideration was also given to the total copper released from the electrodes and its recovery using iron electrodes.

  3. Nasreya: a treatment and disposal facility for industrial hazardous waste in Alexandria, Egypt: phase I.

    Science.gov (United States)

    Ramadan, Adham R; Kock, Per; Nadim, Amani

    2005-04-01

    A facility for the treatment and disposal of industrial hazardous waste has been established in Alexandria, Egypt. Phase I of the facility encompassing a secure landfill and solar evaporation ponds is ready to receive waste, and Phase II encompassing physico-chemical treatment, solidification, and interim storage is underway. The facility, the Nasreya Centre, is the first of its kind in Egypt, and represents the nucleus for the integration, improvement and further expansion of different hazardous waste management practices and services in Alexandria. It has been developed within the overall legal framework of the Egyptian Law for the Environment, and is expected to improve prospects for enforcement of the regulatory requirements specified in this law. It has been developed with the overall aim of promoting the establishment of an integrated industrial hazardous waste management system in Alexandria, serving as a demonstration to be replicated elsewhere in Egypt. For Phase I, the Centre only accepts inorganic industrial wastes. In this respect, a waste acceptance policy has been developed, which is expected to be reviewed during Phase II, with an expansion of the waste types accepted.

  4. Anaerobic wastewater treatment in the food processing industry: two case studies

    Energy Technology Data Exchange (ETDEWEB)

    Campos, J.R.; Foresti, E.; Camacho, R.D.P.

    1986-01-01

    This article relates two experiments with wastewater treatment in the food processing industry. One of them refers to the use of an anaerobic filter (meat processing industry) and the other to the use of an upflow anaerobic sludge blanket reactor-UASB (vegetable and fruit processing industry). In the first case, the study describes the performance of an anaerobic filter which has been working for 6 years and provides COD removal efficiency (including primary treatment) equal or better than 80% with an organic loading of 1.4 kg of COD/cubic m/day. The reactor has a bed of broken stones with size of 0.75 m having a medium hydraulic retention time of 13 hours. Discharges of accumulated sludge in a false bottom below the filter are made at intervals of 2 or 3 months. In the second case, the study describes the performance of an upflow anaerobic sludge blanket reactor (88 cubic m) during 255 days of operation including the adaptation phase or startup. This reactor receives wastewater from vegetable and fruit processing including tomato, corn, guava and peach. At the end of each operational phase studied, the COD removal efficiency was about 80%. In the last phase (7.5 hours hydraulic retention time), the organic loading was 1.4 kg of COD/cubic m/day and the hydraulic loading was 3.2 cubic m/cubic m/day. (Refs. 11).

  5. Developing drugs for treatment of atopic dermatitis in children (≥3 months to industry.

    Science.gov (United States)

    Siegfried, Elaine C; Jaworski, Jennifer C; Eichenfield, Lawrence F; Paller, Amy; Hebert, Adelaide A; Simpson, Eric L; Altman, Emily; Arena, Charles; Blauvelt, Andrew; Block, Julie; Boguniewicz, Mark; Chen, Suephy; Cordoro, Kelly; Hanna, Diane; Horii, Kimberly; Hultsch, Thomas; Lee, James; Leung, Donald Y; Lio, Peter; Milner, Joshua; Omachi, Theodore; Schneider, Christine; Schneider, Lynda; Sidbury, Robert; Smith, Timothy; Sugarman, Jeffrey; Taha, Sharif; Tofte, Susan; Tollefson, Megha; Tom, Wynnis L; West, Dennis P; Whitney, Lucinda; Zane, Lee

    2018-03-30

    Atopic dermatitis is the most common chronic skin disease, and it primarily affects children. Although atopic dermatitis (AD) has the highest effect on burden of skin disease, no high-level studies have defined optimal therapy for severe disease. Corticosteroids have been used to treat AD since the 1950s and remain the only systemic medication with Food and Drug Administration approval for this indication in children, despite published guidelines of care that recommend against this option. Several clinical trials with level 1 evidence have supported the use of topical treatments for mild to moderate atopic dermatitis in adults and children, but these trials have had little consistency in protocol design. Consensus recommendations will help standardize clinical development and trial design for children. The Food and Drug Administration issues guidance documents for industry as a source for "the Agency's current thinking on a particular subject." Although they are nonbinding, industry considers these documents to be the standard for clinical development and trial design. Our consensus group is the first to specifically address clinical trial design in this population. We developed a draft guidance document for industry, Developing Drugs for Treatment of Atopic Dermatitis in Children (≥3 months to <18 years of age). This draft guidance has been submitted to the Food and Drug Administration based on a provision in the Federal Register (Good Guidance Practices). © 2018 Wiley Periodicals, Inc.

  6. Patterns of waste generation, treatment and disposal in the chemical and allied industries in Ghana

    Directory of Open Access Journals (Sweden)

    Osei-Wusu Achaw

    2012-09-01

    Full Text Available Environmental pollution and degradation in urban Ghana has been on the increase as a result of the nations drive towards industrialization, a generally weak regulatory regime, and a lack of capacity to manage the environment. This situation is affecting the well-being and livelihood of affected communities. As part of an effort to address the issue, a thirteen (13 item questionnaire was designed and distributed to seventy (70 companies in the chemical and allied industry to solicit and analyze data and information on the their waste management situation. Forty-seven, representing 67.1%, of the distributed questionnaires were completed and returned. The responses were analyzed using tables, percentages and bar charts. The results revealed that while 80.9% of the respondents generate waste as a result of the operation of the plants, 23.3% directly dump their waste into the environment without any prior treatment. Only one company was found that incinerate its waste, and only four (8.5% had comprehensive waste water treatment plants. The low numbers of companies treating the waste they generate prior to disposal means that the chemical and allied industry is contributing to the environmental pollution and degradation in the country.

  7. Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents =

    Science.gov (United States)

    Nogueira, Veronica Ines Jesus Oliveira

    Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was

  8. Distribution of free-living amoebae in a treatment system of textile industrial wastewater.

    Science.gov (United States)

    Ramirez, Elizabeth; Robles, Esperanza; Martinez, Blanca; Ayala, Reynaldo; Sainz, Guadalupe; Martinez, Maria Elena; Gonzalez, Maria Elena

    2014-11-01

    Free-living amoebae have been found in soil, air and a variety of aquatic environments, but few studies have been conducted on industrial wastewater and none on wastewater from the textile industry. The aim of this study was to determine the presence and distribution of free-living amoebae in a biological treatment system that treats textile industrial wastewater. Samples were taken from input, aeration tank, sedimentation tank and output. Samples were centrifuged at 1200g for 15min, the sediment was seeded on non-nutritive agar with Enterobacter aerogenes (NNE) and the plates were incubated at 30 and 37°C. Free-living amoebae were present in all stages of the treatment system. The highest number of amoebic isolates was found in the aeration tank and no seasonal distribution was observed during the year. A total of 14 amoeba genera were isolated: Acanthamoeba, Echinamoeba, Korotnevella, Mayorella, Naegleria, Platyamoeba, Saccamoeba, Stachyamoeba, Thecamoeba, Vahlkampfia, Vannella, Vermamoeba, Vexillifera and Willaertia. The most frequently found amoebae were Acanthamoeba and Vermamoeba which were found in all treatment system stages. The constant presence and diversity of free-living amoebae in the treatment system were important findings due to the characteristics of the wastewater from the textile plant in terms of the residue content from colorants, fixers, carriers, surfactants, etc., used in fabric dyeing and finishing processes. The factors that determined the presence and distribution of amoebae in the activated sludge system were their capacity to form cysts, which allowed them to resist adverse conditions; food availability; an average temperature of 27-33°C; dissolved oxygen in average concentrations above 2mg/L, and pH in a range of 5.9-7.1. Copyright © 2014 Elsevier Inc. All rights reserved.

  9. Understanding and Supporting Window Switching

    NARCIS (Netherlands)

    Tak, S.

    2011-01-01

    Switching between windows on a computer is a frequent activity, but finding and switching to the target window can be inefficient. This thesis aims to better un-derstand and support window switching. It explores two issues: (1) the lack of knowledge of how people currently interact with and switch

  10. A Window-Washing Challenge

    Science.gov (United States)

    Roman, Harry T.

    2010-01-01

    Skyscrapers sure do have a lot of windows, and these windows are cleaned and checked regularly. All this takes time, money, and puts workers at potential risk. Might there be a better way to do it? In this article, the author discusses a window-washing challenge and describes how students can tackle this task, pick up the challenge, and creatively…

  11. Development of fluoric compound treatment system in conversion for recycle in metal industry

    International Nuclear Information System (INIS)

    Kim, P.O.; Cho, N.C.

    1998-01-01

    Korea Nuclear Fuel Company (KNFC) has been operating AUC conversion process from UF 6 to UO 2 from 1990. In 1997, KNFC constructed another conversion line called dry conversion to meet the increasing demand for nuclear fuel fabrication. In the dry conversion, two kinds of hydrofluoric acid (HF) are produced as a by-product. The first one is 50% concentration HF and the other one is diluted HF ranging from 10% to 49%. The high concentration HF can be used in metal industry, but there is no use for diluted one. The diluted HF should be disposed of as liquid waste after some treatment. To solve this problem we have developed the process to convert the diluted hydrofluoric acid to the sodium fluoride, which is readily used in the metal industry. By developing the process we could make a contribution to the environment as well as cost reduction in manufacturing nuclear fuel. (author)

  12. Industrial applications of electron beam flue gas treatment - From laboratory to the practice

    International Nuclear Information System (INIS)

    Chmielewski, Andrzej G.

    2007-01-01

    The electron beam technology for flue gas treatment (EBFGT) has been developed in Japan in the early 1980s. Later on, this process was investigated in pilot scale in the USA, Germany, Japan, Poland, Bulgaria and China. The new engineering and process solutions have been developed during the past two decades. Finally industrial plants have been constructed in Poland and China. The high efficiency of SO x and NO x removal was achieved (up to 95% for SO x and up to 70% for NO x ) and by-product is a high quality fertilizer. Since the power of accelerators applied in industrial installation is over 1 MW and requested operational availability of the plant is equal to 8500 h in year, it is a new challenge for radiation processing applications

  13. Industrial water pollution, water environment treatment, and health risks in China.

    Science.gov (United States)

    Wang, Qing; Yang, Zhiming

    2016-11-01

    The negative health effects of water pollution remain a major source of morbidity and mortality in China. The Chinese government is making great efforts to strengthen water environment treatment; however, no studies have evaluated the effects of water treatment on human health by water pollution in China. This study evaluated the association between water pollution and health outcomes, and determined the extent to which environmental regulations on water pollution may lead to health benefits. Data were extracted from the 2011 and 2013 China Health and Retirement Longitudinal Study (CHARLS). Random effects model and random effects Logit model were applied to study the relationship between health and water pollution, while a Mediator model was used to estimate the effects of environmental water treatment on health outcomes by the intensity of water pollution. Unsurprisingly, water pollution was negatively associated with health outcomes, and the common pollutants in industrial wastewater had differential impacts on health outcomes. The effects were stronger for low-income respondents. Water environment treatment led to improved health outcomes among Chinese people. Reduced water pollution mediated the associations between water environment treatment and health outcomes. The results of this study offer compelling evidence to support treatment of water pollution in China. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Control system of an anaerobia reactor used in the treatment of the Industrial residual waters

    International Nuclear Information System (INIS)

    Duque, Mauricio; Giraldo, Eugenio; Bello Frank

    1995-01-01

    The technology of the anaerobia digestion, has had a wide acceptance in the Colombian means for the treatment of industrial residual waters, especially for the economic advantages that it present and the good purification results. The technology of the anaerobia digestion for the treatment of residual waters, is based in the conversion of the organic matter present in the polluted waters, in methane and carbon dioxide. These two gases are removed of the reactor by means of special structures of gathering. Microorganisms that are sensitive to the changes of the pH mediate the conversion of the organic matter to CH4 and CO2. Therefore, the control on the pH is necessary for a correct behavior of the reactor. At the moment many industries are implementing plans of contamination control, that involve treatment of residual waters for means anaerobia. The present investigation is part of a wide work program in the technology of the anaerobia digestion. It is looked for to develop a monitored system and automatic control of reactors discharge anaerobia appraises, in a combined effort among the departments of Civil and Electric Engineering of the Andes University

  15. Integrated process control for recirculating cooling water treatment in the coal chemical industry.

    Science.gov (United States)

    Pei, Y S; Guo, W; Yang, Z F

    2011-01-01

    This work focused on the integrated process of the recirculating cooling water (RCW) treatment to achieve approximate zero emission in the coal chemical industry. The benefits of fractional and comprehensive RCW treatment were quantified and qualified by using a water and mass balance approach. Limits of cycle of concentrations and some encountered bottlenecks were used to ascertain set target limits for different water sources. Makeup water was mixed with water produced from reverse osmosis (RO) in the proportion of 6:4, which notably reduced salts discharge. Side infiltration, which settled down suspended solids, can reduce energy consumption by over 40%. An automated on-line monitoring organic phosphorus inhibitor feed maintains the RCW system stability in comparison to the manual feed. Two-step electrosorb technology (EST) instead of an acid feed can lead cycle of concentration of water to reach 7.0. The wastewater from RO, EST and filter was transferred into a concentration treatment system where metallic ions were adsorbed by permanent magnetic materials. Separation of water and salts was completed by using a magnetic disc separator. Applying the integrated process in a coal chemical industry, a benefit of 1.60 million Yuan annually in 2 years was gained and approximate zero emission was achieved. Moreover, both technical and economic feasibility were demonstrated in detail.

  16. Validation and implementation of model based control strategies at an industrial wastewater treatment plant.

    Science.gov (United States)

    Demey, D; Vanderhaegen, B; Vanhooren, H; Liessens, J; Van Eyck, L; Hopkins, L; Vanrolleghem, P A

    2001-01-01

    In this paper, the practical implementation and validation of advanced control strategies, designed using model based techniques, at an industrial wastewater treatment plant is demonstrated. The plant under study is treating the wastewater of a large pharmaceutical production facility. The process characteristics of the wastewater treatment were quantified by means of tracer tests, intensive measurement campaigns and the use of on-line sensors. In parallel, a dynamical model of the complete wastewater plant was developed according to the specific kinetic characteristics of the sludge and the highly varying composition of the industrial wastewater. Based on real-time data and dynamic models, control strategies for the equalisation system, the polymer dosing and phosphorus addition were established. The control strategies are being integrated in the existing SCADA system combining traditional PLC technology with robust PC based control calculations. The use of intelligent control in wastewater treatment offers a wide spectrum of possibilities to upgrade existing plants, to increase the capacity of the plant and to eliminate peaks. This can result in a more stable and secure overall performance and, finally, in cost savings. The use of on-line sensors has a potential not only for monitoring concentrations, but also for manipulating flows and concentrations. This way the performance of the plant can be secured.

  17. Application of electron beam irradiation combined to conventional treatment to treat industrial effluents

    Science.gov (United States)

    Duarte, C. L.; Sampa, M. H. O.; Rela, P. R.; Oikawa, H.; Cherbakian, E. H.; Sena, H. C.; Abe, H.; Sciani, V.

    2000-03-01

    A preliminary study to combine electron beam irradiation process with biological treatment was carried out. Experiments were conducted using samples from a governmental wastewater treatment plant (WTP) that receives about 20% of industrial wastewater, with the objective of destroying the refractory organic pollutants and to obtain a better performance of this plant. Samples from five different steps of WTP were collected and irradiated in the electron beam accelerator in a batch system with 5.0, 10.0 and 20.0 kGy doses. The main results showed a removal of 99% of all organic compound analysed in the industrial receiver unit (IRU) effluent and in the coarse bar screen (CBS) effluent with a 20 kGy dose, and for the medium bar screen (MBS) and primary sedimentation (PS) effluent a 10 kGy dose was sufficient. In the case of final effluent (FE), a dose of 5 kGy removed the remaining organic compounds and dyes present after biological treatment.

  18. Anaerobic treatment of blended sugar industry and ethanol distillery wastewater through biphasic high rate reactor.

    Science.gov (United States)

    Fito, Jemal; Tefera, Nurelegne; Kloos, Helmut; Van Hulle, Stijn W H

    2018-03-01

    This study aimed to investigate the physicochemical properties of sugar industry and ethanol distillery wastewater and the treatment of the blended wastewater through a two-stage anaerobic reactor. For this treatment, different initial chemical oxygen demand (COD) concentrations (5-20 g/L) and hydraulic retention times (HRTs) (2-10 days) were applied. The sugar industry effluent characteristics obtained in terms of organic matter (mg/L) were as follows: 5 days biochemical oxygen demand (BOD 5 ): 654.5-1,968; COD: 1,100-2,148.9; total solids (TS): 2,467-4,012 mg/L; and pH: 6.93-8.43. The ethanol distillery spent wash strengths obtained were: BOD 5 : 27,600-42,921 mg/L; COD: 126,000-167,534 mg/L; TS: 140,160-170,000 mg/L; and pH: 3.9-4.2. Maximum COD removal of 65% was obtained at optimum condition (initial COD concentration of 10 g/L and HRT of 10 days), and maximum color removal of 79% was recorded under similar treatment conditions. Hence, the performance of the two-stage anaerobic reactor for simultaneous removal of COD and color from high-strength blended wastewater is promising for scaling up in order to mitigate environmental problems of untreated effluent discharge.

  19. Windows Home Server users guide

    CERN Document Server

    Edney, Andrew

    2008-01-01

    Windows Home Server brings the idea of centralized storage, backup and computer management out of the enterprise and into the home. Windows Home Server is built for people with multiple computers at home and helps to synchronize them, keep them updated, stream media between them, and back them up centrally. Built on a similar foundation as the Microsoft server operating products, it's essentially Small Business Server for the home.This book details how to install, configure, and use Windows Home Server and explains how to connect to and manage different clients such as Windows XP, Windows Vist

  20. Teach yourself visually Windows 10

    CERN Document Server

    McFedries, Paul

    2015-01-01

    Learn Windows 10 visually with step-by-step instructions Teach Yourself VISUALLY Windows 10 is the visual learner's guide to the latest Windows upgrade. Completely updated to cover all the latest features, this book walks you step-by-step through over 150 essential Windows tasks. Using full color screen shots and clear instruction, you'll learn your way around the interface, set up user accounts, play media files, download photos from your camera, go online, set up email, and much more. You'll even learn how to customize Windows 10 to suit the way you work best, troubleshoot and repair common

  1. Sunlight Responsive Thermochromic Window System

    Energy Technology Data Exchange (ETDEWEB)

    Millett, F,A; Byker,H, J

    2006-10-27

    Pleotint has embarked on a novel approach with our Sunlight Responsive Thermochromic, SRT™, windows. We are integrating dynamic sunlight control, high insulation values and low solar heat gain together in a high performance window. The Pleotint SRT window is dynamic because it reversibly changes light transmission based on thermochromics activated directly by the heating effect of sunlight. We can achieve a window package with low solar heat gain coefficient (SHGC), a low U value and high insulation. At the same time our windows provide good daylighting. Our innovative window design offers architects and building designers the opportunity to choose their desired energy performance, excellent sound reduction, external pane can be self-cleaning, or a resistance to wind load, blasts, bullets or hurricanes. SRT windows would provide energy savings that are estimated at up to 30% over traditional window systems. Glass fabricators will be able to use existing equipment to make the SRT window while adding value and flexibility to the basic design. Glazing installers will have the ability to fit the windows with traditional methods without wires, power supplies and controllers. SRT windows can be retrofit into existing buildings,

  2. Windows Azure web sites

    CERN Document Server

    Chambers, James

    2013-01-01

    A no-nonsense guide to maintaining websites in Windows Azure If you're looking for a straightforward, practical guide to get Azure websites up and running, then this is the book for you. This to-the-point guide provides you with the tools you need to move and maintain a website in the cloud. You'll discover the features that most affect developers and learn how they can be leveraged to work to your advantage. Accompanying projects enhance your learning experience and help you to walk away with a thorough understanding of Azure's supported technologies, site deployment, and manageme

  3. Windows Terminal Servers Orchestration

    Science.gov (United States)

    Bukowiec, Sebastian; Gaspar, Ricardo; Smith, Tim

    2017-10-01

    Windows Terminal Servers provide application gateways for various parts of the CERN accelerator complex, used by hundreds of CERN users every day. The combination of new tools such as Puppet, HAProxy and Microsoft System Center suite enable automation of provisioning workflows to provide a terminal server infrastructure that can scale up and down in an automated manner. The orchestration does not only reduce the time and effort necessary to deploy new instances, but also facilitates operations such as patching, analysis and recreation of compromised nodes as well as catering for workload peaks.

  4. Transparent aerogel Windows

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe

    In a recent EU FP5 project, monolithic silica aerogel was further developed with respect to the production process at pilot-scale, its properties and the application as transparent insulation material in highly insulating and transparent windows. The aerogel production process has been optimised......-value of 0.7 W/m²K for about 14 mm aerogel thickness, which for a 20 mm thickness corresponds to a U-value of approximately 0.5 W/m²K. No other known glazing exhibits such an excellent combination of solar transmittance and heat loss coefficient. At a Danish location and North facing, the energy balance...

  5. Windows on animal minds.

    Science.gov (United States)

    Griffin, D R

    1995-06-01

    The simple kinds of conscious thinking that probably occur in nonhuman animals can be studied objectively by utilizing the same basic procedure that we use every day to infer what our human companions think and feel. This is to base such inferences on communicative behavior, broadly defined to include human language, nonverbal communication, and semantic communication in apes, dolphins, parrots, and honeybees. It seems likely that animals often experience something similar to the messages they communicate. Although this figurative window on other minds is obviously imperfect, it is already contributing significantly to our growing understanding and appreciation of animal mentality.

  6. Invariant sets for Windows

    CERN Document Server

    Morozov, Albert D; Dragunov, Timothy N; Malysheva, Olga V

    1999-01-01

    This book deals with the visualization and exploration of invariant sets (fractals, strange attractors, resonance structures, patterns etc.) for various kinds of nonlinear dynamical systems. The authors have created a special Windows 95 application called WInSet, which allows one to visualize the invariant sets. A WInSet installation disk is enclosed with the book.The book consists of two parts. Part I contains a description of WInSet and a list of the built-in invariant sets which can be plotted using the program. This part is intended for a wide audience with interests ranging from dynamical

  7. Windows Azure Platform

    CERN Document Server

    Redkar, Tejaswi

    2011-01-01

    The Windows Azure Platform has rapidly established itself as one of the most sophisticated cloud computing platforms available. With Microsoft working to continually update their product and keep it at the cutting edge, the future looks bright - if you have the skills to harness it. In particular, new features such as remote desktop access, dynamic content caching and secure content delivery using SSL make the latest version of Azure a more powerful solution than ever before. It's widely agreed that cloud computing has produced a paradigm shift in traditional architectural concepts by providin

  8. Activated carbon fiber filler in aerated bioreactor for industrial wastewater treatment.

    Science.gov (United States)

    Zhou, Dongkai; Hai, Reti; Wang, Wenxing; Zhao, Donglin; Wang, Shuo

    2012-01-01

    The aerated bioreactor is a promising technology for wastewater treatment. Activated carbon fiber (ACF) used as a biomembrane carrier in wastewater disposal has attracted much more concern recently. The high modulus polyacrylonitrile (PAN)-based ACF was successfully used as a biomembrane carrier for hard-to-biodegrade industrial organic wastewater disposal in a lab-scale aerated biomembrane reactor at room temperature. The biocompatibility test shows that the biomembrane grows quickly on the ACF filler (ACFF) surface; bacteria and microzoon can breed on the ACFF surface at high chemical oxygen demand (COD) concentration. The COD removal rate tests show that the ACFF bioreactor has high capability to remove COD.

  9. Membrane technologies for water treatment and reuse in the textile industry

    DEFF Research Database (Denmark)

    Petrinić, I.; Bajraktari, Niada; Hélix-Nielsen, Claus

    2015-01-01

    Textile wastewater is a challenging feed stream for treatment by membrane separation because of its complex composition and the presence of reactive components. Here we briefly present examples of reverse osmosis-, nanofiltration- and ultrafiltration-based systems as well as membrane bioreactor...... technology for textile wastewater remediation. However, for all of these approaches the general issue of (bio)fouling represents a major obstacle for full-scale industrial implementation. Forward osmosis (FO) membranes have recently attracted considerable interest because the low fouling propensity of FO...

  10. Regulating specific organic substances and heavy metals in industrial wastewater discharged to municipal wastewater treatment plants

    DEFF Research Database (Denmark)

    Grüttner, Henrik; Munk, L.; Pedersen, F.

    1994-01-01

    Due to the extension of wastewater treatment plants to nutrient removal and the development towards reuse of sludge m agriculture, new guidelines for regulating industrial discharges m Denmark were needed. The paper describes how a concept for regulating the discharge of specific organic substances...... for sludge intended for use in agriculture, and the quality criteria for the aquatic environment. Proposals for general guidelines have been calculated using a simple mass balance model combined with water quality criteria and the Danish limit values for use of sludge in agriculture....

  11. Sewage and industrial waste treatment: Wetlands. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    The bibliography contains citations concerning developments, operations, and evaluations of the treatment of wastewaters and sludges in natural and artificial wetlands. The citations also examine aquaculture treatments of industrial, municipal, and domestic wastewaters. Topics include nutrient removal, heavy metal recovery, and case studies of wetlands being used for wastewater treatment. (Contains 250 citations and includes a subject term index and title list.)

  12. Sewage and industrial waste treatment: Wetlands. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    The bibliography contains citations concerning developments, operations, and evaluations of the treatment of wastewaters and sludges in natural and artificial wetlands. The citations also examine aquaculture treatments of industrial, municipal, and domestic wastewaters. Topics include nutrient removal, heavy metal recovery, and case studies of wetlands being used for wastewater treatment. (Contains 250 citations and includes a subject term index and title list.)

  13. 78 FR 9396 - Draft Guidance for Industry on Alzheimer's Disease: Developing Drugs for the Treatment of Early...

    Science.gov (United States)

    2013-02-08

    ... HUMAN SERVICES Food and Drug Administration Draft Guidance for Industry on Alzheimer's Disease... a draft guidance for industry entitled ``Alzheimer's Disease: Developing Drugs for the Treatment of... demonstrate efficacy in clinical trials in patients in the early stages of Alzheimer's disease that occur...

  14. Continuous treatment of coloured industry wastewater using immobilized Phanerochaete chrysosporium in a rotating biological contactor reactor.

    Science.gov (United States)

    Pakshirajan, Kannan; Kheria, Sumeet

    2012-06-30

    Coloured industry wastewaters often contain dyes and other toxic ingredients, and, therefore, pose serious threat to the receiving environment. Among the available methods the eco-friendly biological method has gained maximum attention due to its many advantages over the traditional methods. In the present study, continuous biological treatment of coloured wastewater from a textile dyeing industry was investigated using the white rot fungus Phanerochaete chrysosporium in a rotating biological contactor (RBC) reactor. The raw wastewater was diluted with an equal volume of either distilled water or media containing glucose at varying concentrations to study its effect on the decolourization process. Results revealed that the wastewater could be decolourized to an extent of more than 64% when diluted with media containing glucose; and, a maximum decolourization efficiency of 83% was obtained with 10 g/l glucose concentration. COD removal efficiencies were also found to be consistent with the decolourization efficiencies of the wastewaters. Further, the results were correlated with the enzyme activities of manganese peroxidase (MnP) and lignin peroxidase (LiP) by the fungus, which were found to play some significant role in decolourization of the wastewater. Results of replacing the costly carbon source glucose in the decolourization media with the more cheap molasses, however, revealed very high COD removal efficiency, but low decolourization efficiency of the industry wastewater. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Treatment of industrial effluents in constructed wetlands: challenges, operational strategies and overall performance.

    Science.gov (United States)

    Wu, Shubiao; Wallace, Scott; Brix, Hans; Kuschk, Peter; Kirui, Wesley Kipkemoi; Masi, Fabio; Dong, Renjie

    2015-06-01

    The application of constructed wetlands (CWs) has significantly expanded to treatment of various industrial effluents, but knowledge in this field is still insufficiently summarized. This review is accordingly necessary to better understand this state-of-the-art technology for further design development and new ideas. Full-scale cases of CWs for treating various industrial effluents are summarized, and challenges including high organic loading, salinity, extreme pH, and low biodegradability and color are evaluated. Even horizontal flow CWs are widely used because of their passive operation, tolerance to high organic loading, and decolorization capacity, free water surface flow CWs are effective for treating oil field/refinery and milking parlor/cheese making wastewater for settlement of total suspended solids, oil, and grease. Proper pretreatment, inflow dilutions through re-circulated effluent, pH adjustment, plant selection and intensifications in the wetland bed, such as aeration and bioaugmentation, are recommended according to the specific characteristics of industrial effluents. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Fundamental aspects of oily waters treatment from the mineral industries by electrolytic techniques

    Energy Technology Data Exchange (ETDEWEB)

    Merma, A.G.; Gonzales, L.V.; Torem, M.L. [Pontifical Catholic Univ. of Rio de Janeiro, Rio de Janeiro (Brazil). Dept. of Materials Engineering

    2010-07-01

    There is an immediate need to develop innovative and more effective techniques for treatment of wastewaters as regulations on effluent wastewater discharge are becoming increasingly prevalent. The mining and metallurgical industries generate wastewaters that contain stable oil-in-water emulsions, arising from residues of liquid streams that serve the purpose of lubrication, cooling, cleaning and corrosion prevention in the equipment used in those industries. Chemically stabilized oil-water emulsions produced in the mineral industries can be treated using an electrocoagulation technique that considers the effects of operating parameters such as initial pH, current density, reaction time, electrode area/liquid volume ratio and electrode materials on the separation of oil as measured by the chemical oxygen demand. The paper discussed electrocoagulation as well as the materials and methods for the study, including oil in water emulsions; the experimental apparatus; and the experimental procedure. It was concluded that the electrolysis of this kind of oil in water emulsions with aluminum electrodes resulted in pH neutralization regardless of the initial pH tested. 18 refs., 4 figs.

  17. Removal and transformation of polycyclic aromatic hydrocarbons during electrocoagulation treatment of an industrial wastewater.

    Science.gov (United States)

    Gong, Chenhao; Shen, Gang; Huang, Haiou; He, Peiran; Zhang, Zhongguo; Ma, Baoqing

    2017-02-01

    Polycyclic aromatic hydrocarbons (PAHs) are an important class of water pollutants because of their known ecological and human toxicity. Electrocoagulation (EC) is a promising technology for mitigating industrial wastewater pollution, but the removal and transformation of PAHs during EC treatment has not yet been understood. Therefore, a paper-making wastewater effluent (PMWW) was employed in this study to investigate the relationship between PAHs' removal and transformation during EC treatment. The results show that 86% of PAHs were effectively removed not only by the electro-oxidation reactions, but also by adsorption onto Fe hydroxide flocs. The removal and transformation of PAHs were related to the number of rings in their structures. Some PAHs composed of two aromatic rings (e.g., naphthaline and dimethylnaphthalene) were produced from humic acid-like and fulvic acid-like organics in PMWW, while PAHs with three to four rings were degraded, thus being removed efficiently. Therefore, PAH transformation during EC treatment exerted double-sided effects on the removal of PAHs; the net effect appeared to be positive. Overall, this study revealed the existence and importance of PAH transformation during EC treatment and provided useful guidance for pulp and paper mills to improve the design and operation of wastewater treatment facilities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Waste Water Treatment-Bed of Coal Fly Ash for Dyes and Pigments Industry

    International Nuclear Information System (INIS)

    Shah, S.F.A.; Aftab, A.; Soomro, N.; Nawaz, M.S.; Vafai, K.

    2015-01-01

    The highly porous power plant waste ashes have been utilized to treat toxic effluent of a dyes manufacturing plant. An attempt has been made for the first time in Pakistan, to generate an effective and economically sound treatment facility for the toxic effluent of a dyes manufacturing plant. This is an indigenous bed which could replace expensive treatment facilities, such as reverse osmosis (RO), granulated activated carbon (GAC) bed, etc. The treatment efficiency was improved by coupling coagulants with fly ash adsorbent bed. The ash was collected from coal fired boilers of power plant at Lakhra Power Generation Company, Jamshoro, Pakistan. The use of this ash resolved the disposal and environmental issues by treating wastewater of chemical, dyes and pigment industry. The treatment bed comprised of briquettes of coal fly ash coupled with commercial coagulant ferrous sulfate-lime reduced COD, color, turbidity and TSS of effluent remarkably. An adsorption capacity and chemical behavior of fly ash bed was also studied. In coagulation treatment, coagulant FeSO/sun 4/-lime influenced reduction of COD, color, turbidity and TSS by 32 percentage, 48 percentage, 50 percentage and 51 percentage, respectively. The CFAB coupled with coagulant, resulted an excessive removal of color, TSS, COD, and turbidity by 88 percentage, 92 percentage, 67 percentage and 89 percentage, respectively. (author)

  19. Perspectives on the feasibility of using microalgae for industrial wastewater treatment.

    Science.gov (United States)

    Wang, Yue; Ho, Shih-Hsin; Cheng, Chieh-Lun; Guo, Wan-Qian; Nagarajan, Dillirani; Ren, Nan-Qi; Lee, Duu-Jong; Chang, Jo-Shu

    2016-12-01

    Although microalgae can serve as an appropriate alternative feedstock for biofuel production, the high microalgal cultivation cost has been a major obstacle for commercializing such attempts. One of the feasible solution for cost reduction is to couple microalgal biofuel production system with wastewater treatment, as microalgae are known to effectively eliminate a variety of nutrients/pollutants in wastewater, such as nitrogen/phosphate, organic carbons, VFAs, pharmaceutical compounds, textile dye compounds, and heavy metals. This review aims to critically discuss the feasibility of microalgae-based wastewater treatment, including the strategies for strain selection, the effect of wastewater types, photobioreactor design, economic feasibility assessment, and other key issues that influence the treatment performance. The potential of microalgae-bacteria consortium for treatment of industrial wastewaters is also discussed. This review provides useful information for developing an integrated wastewater treatment with microalgal biomass and biofuel production facilities and establishing efficient co-cultivation for microalgae and bacteria in such systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Waste Water Treatment-Bed of Coal Fly Ash for Dyes and Pigments Industry

    Directory of Open Access Journals (Sweden)

    Syed Farman Ali Shah

    2015-12-01

    Full Text Available The highly porous power plant waste ashes have been utilized to treat toxic effluent of a dyes manufacturing plant. An attempt has been made for the first time in Pakistan, to generate an effective and economically sound treatment facility for the toxic effluent of a dyes manufacturing plant. This is an indigenous bed which could replace expensive treatment facilities, such as reverse osmosis (RO, granulated activated carbon (GAC bed, etc. The treatment efficiency was improved by coupling coagulants with fly ash adsorbent bed. The ash was collected from coal fired boilers of power plant at Lakhra Power Generation Company, Jamshoro, Pakistan. The use of this ash resolved the disposal and environmental issues by treating wastewater of chemical, dyes and pigment industry. The treatment bed comprised of briquettes of coal fly ash coupled with commercial coagulant ferrous sulfate-lime reduced COD, color, turbidity and TSS of effluent remarkably. An adsorption capacity and chemical behavior of fly ash bed was also studied. In coagulation treatment, coagulant FeSO4-lime influenced reduction of COD, color, turbidity and TSS by 32%, 48%, 50% and 51%, respectively. The CFAB coupled with coagulant, resulted an excessive removal of color, TSS, COD, and turbidity by 88%, 92%, 67% and89%, respectively.

  1. Evaluation of industrial hydrotalcite for the sulfated water treatment of the Valle de Puebla

    International Nuclear Information System (INIS)

    Rosano O, G.

    2003-01-01

    In Puebla City, the drinking water is a scarce natural resource since at the moment it exists a deficit in its supply of more than 700 L/s. Nevertheless, the region has a system of aquifer: a first-aquifer known as superior, which is overexploited, and a half-aquifer characterized by water with gases (H 2 S, CO 2 ), high hardness (1270 mgL -1 as CaCO 3 ) alkalinity (1050 mgL -1 as CaCO 3 ) and high contents of different chemical species of sulfur (985 mgL -1 SO 4 2- , 6.2 mgL -1 S 2- , 43 mgL -1 SO 3 2- ). Up to now the treatment used in the city of Puebla for this type of water consists on the following stages: de gasification, oxidation, treatment of gases, system of softening, clotting/flocculation chemical-physical treatment, load high sedimentation, treatment and dehydration of sludge, quick filtration, inverse osmosis, blended of treated water and disinfection; which represents a complex treatment. The objective of this research, was to find an alternative treatment for this ground water, in order to obtain a drinking water and, consequently, to simplify operations. An industrial hydrotalcite (anionic clay available in large quantities) has been characterized, modified by means of thermal treatment and used. Sorption tests have been made with this hydrotalcite in batch sets and in columns, these experiments have allowed to check how the concentration of the characteristic parameters of the ground water such as the high hardness and the high contents of chemical species of sulfur decrease simultaneously. This removal has allowed to obtain values of these parameters quite below the permissible maximum limits for drinking water according to the mexican norms, with the exception of the p H since values of 10 are obtained (value limit: 6.5 - 8.5). Furthermore, the results of the sorption tests in columns allowed to calculate that a column packed with 8.35 kg of the industrial hydrotalcite modified thermally and granulated to mesh 18-20, and a contact time of t c

  2. Windows on the axion

    International Nuclear Information System (INIS)

    Turner, M.S.

    1989-04-01

    Peccei-Quinn symmetry with attendant axion is a most compelling, and perhaps the most minimal, extension of the standard model, as it provides a very elegant solution to the nagging strong CP-problem associated with the Θ vacuum structure of QCD. However, particle physics gives little guidance as to the axion mass; a priori, the plausible values span the range: 10/sup /minus/12/ eV /approx lt/ m/sub a/ /approx lt/ 10 6 eV, some 18 orders-of-magnitude. Axions have a host of interesting astrophysical and cosmological effects, including, modifying the evolution of stars of all types (our sun, red giants, white dwarfs, and neutron stars), contributing significantly to the mass density of the Universe today, and producing detectable line radiation through the decays of relic axions. Consideration of these effects has probed 14 orders-of-magnitude in axion mass, and has left open only two windows for further exploration: 10/sup /minus/6/ eV /approx lt/ m/sub a/ /approx lt/ 10/sup /minus/3/ eV and 1 eV /approx lt/ m/sub a/ /approx lt/ 5 eV (hadronic axions only). Both these windows are accessible to experiment, and a variety of very interesting experiments, all of which involve ''heavenly axions,'' are being planned or are underway. 58 refs., 6 figs., 1 tab

  3. WINDOW-CLEANING

    CERN Multimedia

    Environmental Section / ST-TFM

    2001-01-01

    The two-month window-cleaning session on the Meyrin, Prévessin and LEP sites will soon begin. The cleaning contractors will work from Monday to Saturday, every week from 4.00 a.m. to 8.00 p.m. The work will be organised so as to disturb users as little as possible. In any event, a work notice will be left in each office 24 hours beforehand. To prevent any damage to documents or items which could occur despite the precautions taken, please clear completely the window-sills and the area immediately around them. If, however, for valid reasons, the work cannot be done on the scheduled day, please inform the Environmental Section by telephoning: 73753 / 74233 / 72242 If you are going to be absent during this two-month period, we should be grateful if you would clear the above mentioned areas before your departure. REMINDER To allow more thorough cleaning of the entrance doors to buildings and also facilitate the weekly work of the cleaning contractors, we ask you to make use of the notice boards at the...

  4. Windows on the axion

    Energy Technology Data Exchange (ETDEWEB)

    Turner, M.S.

    1989-04-01

    Peccei-Quinn symmetry with attendant axion is a most compelling, and perhaps the most minimal, extension of the standard model, as it provides a very elegant solution to the nagging strong CP-problem associated with the THETA vacuum structure of QCD. However, particle physics gives little guidance as to the axion mass; a priori, the plausible values span the range: 10/sup /minus/12/ eV /approx lt/ m/sub a/ /approx lt/ 10/sup 6/ eV, some 18 orders-of-magnitude. Axions have a host of interesting astrophysical and cosmological effects, including, modifying the evolution of stars of all types (our sun, red giants, white dwarfs, and neutron stars), contributing significantly to the mass density of the Universe today, and producing detectable line radiation through the decays of relic axions. Consideration of these effects has probed 14 orders-of-magnitude in axion mass, and has left open only two windows for further exploration: 10/sup /minus/6/ eV /approx lt/ m/sub a/ /approx lt/ 10/sup /minus/3/ eV and 1 eV /approx lt/ m/sub a/ /approx lt/ 5 eV (hadronic axions only). Both these windows are accessible to experiment, and a variety of very interesting experiments, all of which involve ''heavenly axions,'' are being planned or are underway. 58 refs., 6 figs., 1 tab.

  5. Why use a thermophilic aerobic membrane reactor for the treatment of industrial wastewater/liquid waste?

    Science.gov (United States)

    Collivignarelli, Maria Cristina; Abbà, Alessandro; Bertanza, Giorgio

    2015-01-01

    This paper describes the advantages of thermophilic aerobic membrane reactor (TAMR) for the treatment of high strength wastewaters. The results were obtained from the monitoring of an industrial and a pilot scale plant. The average chemical oxygen demand (COD) removal yield was equal to 78% with an organic loading rate (OLR) up to 8-10 kgCOD m(-3) d(-1) despite significant scattering of the influent wastewater composition. Total phosphorus (TP) was removed with a rate of 90%, the most important removal mechanism being chemical precipitation (as hydroxyapatite, especially), which is improved by the continuous aeration that promotes phosphorus crystallization. Moreover, surfactants were removed with efficiency between 93% and 97%. Finally, the experimental work showed that thermophilic processes (TPPs) are complementary with respect to mesophilic treatments.

  6. APPLICATION OF CONSTRUCTED WETLANDS FOR TREATMENT OF WASTEWATER FROM FRUIT AND VEGETABLE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Monika Puchlik

    2016-01-01

    Full Text Available About 2000 plants are involved in fruit and vegetable processing in Poland, they are mostly located in non-urbanized areas and without any access to sewerage and sewage treatment facilities. In 2014, they produced more than 10 hm3 of wastewater requiring treatment, which was discharged directly into surface waters or into the ground. The aim of the study was to evaluate the efficiency of the constructed wetland for treating the sewage from fruit and vegetable industry. The analyzed constructed wetland with vertical flow reveled a reduction in the value of BOD5 to 68.2%, and CODCr to 79.3%. The model was characterized by 60.2% efficiency of total phosphorus removal.

  7. Increased incidence of infertility treatment among women working in the plastics industry

    DEFF Research Database (Denmark)

    Hougaard, K.S.; Hannerz, H.; Feveile, H.

    2009-01-01

    Several plastic chemicals adversely affect reproductive ability. This study examined the possible association between employment in the plastics industry and infertility. Dynamic cohorts of economically active women and men were followed for hospital contacts due to infertility in the Danish...... Occupational Hospitalisation Register, from 1995 to 2005. A person was considered to be at increased risk in a particular year if plastic work was the main occupation in the previous year. Analyses were standardized according to county, socio-economic group, year and age. 107 cases of treatment for female...... infertility were observed among female plastic workers, as opposed to an expected 87.15 cases, i.e. relative risk was 1.23 (95% CI: 1.01-1.48). For male workers the numbers were 41 respectively 49.9 cases, with relative risk being 0.82 (95% CI: 0.59-1.11). The increased incidence of infertility treatment...

  8. Treatment of automotive industry oily wastewater by electrocoagulation: statistical optimization of the operational parameters.

    Science.gov (United States)

    GilPavas, Edison; Molina-Tirado, Kevin; Gómez-García, Miguel Angel

    2009-01-01

    An electrocoagulation process was used for the treatment of oily wastewater generated from an automotive industry in Medellín (Colombia). An electrochemical cell consisting of four parallel electrodes (Fe and Al) in bipolar configuration was implemented. A multifactorial experimental design was used for evaluating the influence of several parameters including: type and arrangement of electrodes, pH, and current density. Oil and grease removal was defined as the response variable for the statistical analysis. Additionally, the BOD(5), COD, and TOC were monitored during the treatment process. According to the results, at the optimum parameter values (current density = 4.3 mA/cm(2), distance between electrodes = 1.5 cm, Fe as anode, and pH = 12) it was possible to reach a c.a. 95% oils removal, COD and mineralization of 87.4% and 70.6%, respectively. A final biodegradability (BOD(5)/COD) of 0.54 was reached.

  9. Effect of Membrane Type for the Treatment of Organized Industrial Zone (OIZ) Wastewater with a Membrane Bioreactor (MBR): Batch Experiments

    OpenAIRE

    Oktay Özkan; İbrahim Uyanık

    2017-01-01

    Organized industrial zone (OIZ) wastewater is a mixed wastewater that is contributed by both municipal use and from different industrial sectors. Since MBR has advantages over conventional treatment plants, membrane types and fouling become the most important parameters in the treatment of this kind of wastewater. In this study, six different membrane types were used to find the most suitable membrane with the least resistivity to fouling. Three different microfiltration (MF) and ultrafiltrat...

  10. Advanced treatment of effluents from an industrial park wastewater treatment plant by ferrous ion activated persulfate oxidation process.

    Science.gov (United States)

    Zhu, Songmei; Zhou, Zhen; Jiang, Haitao; Ye, Jianfeng; Ren, Jiamin; Gu, Lingyun; Wang, Luochun

    The advanced oxidation technology, ferrous ion (Fe(II)) activated persulfate (PS) producing sulfate radicals, was used for the advanced treatment of effluent from an integrated wastewater treatment plant in a papermaking industrial park. Separate and interactive effects of PS dosage, Fe(II)/PS ratio and initial pH on chemical oxygen demand (COD) removal were analyzed by the response surface methodology (RSM). The results showed that Fe(II)-PS system was effective in COD removal from the secondary effluent. PS dosage was the most dominant factor with positive influence on COD removal, followed by initial pH value. The optimum conditions with COD removal of 54.4% were obtained at PS/COD of 2.2, initial pH of 6.47 and Fe(II)/PS of 1.89. UV-visible spectrum analysis showed that after RSM optimization, Fe(II)-PS system effectively degraded large organic molecules into small ones, and decreased humification degree of the effluent. Three-dimensional fluorescence analysis demonstrated that aromatic protein and fulvic substances were fully decomposed by the Fe(II)-PS treatment.

  11. Working with Windows 7 at CERN (EN)

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    Overview of new concepts and user interface changes in Windows 7 as compared with older versions of Windows: XP or Vista. Availability of Windows 7 at CERN and its integration with CERN Windows infrastructure will be discussed.

  12. Ozone in the food industry: Principles of ozone treatment, mechanisms of action, and applications: An overview.

    Science.gov (United States)

    Brodowska, Agnieszka Joanna; Nowak, Agnieszka; Śmigielski, Krzysztof

    2017-04-10

    The food contamination issue requires continuous control of food at each step of the production process. High quality and safety of products are equally important factors in the food industry. They may be achieved with several, more or less technologically advanced methodologies. In this work, we review the role, contribution, importance, and impact of ozone as a decontaminating agent used to control and eliminate the presence of microorganisms in food products as well as to extend their shelf-life and remove undesirable odors. Several researchers have been focusing on the ozone's properties and applications, proving that ozone treatment technology can be applied to all types of foods, from fruits, vegetables, spices, meat, and seafood products to beverages. A compilation of those works, presented in this review, can be a useful tool for establishing appropriate ozone treatment conditions, and factors affecting the improved quality and safety of food products. A critical evaluation of the advantages and disadvantages of ozone in the context of its application in the food industry is presented as well.

  13. Industrial-scale application of the plunger flow electro-oxidation reactor in wastewater depth treatment.

    Science.gov (United States)

    Huang, Guolong; Yao, Jiachao; Pan, Weilong; Wang, Jiade

    2016-09-01

    Effluents after biochemical treatment contain pollutants that are mostly non-degradable. Based upon previous pilot-scale test results, an industrial-scale electro-oxidation device was built to decompose these refractory materials in the effluent from a park wastewater treatment plant. The electro-oxidation device comprised a ditch-shaped plunger flow electrolysis cell, with mesh-plate Ti/PbO2 electrodes as the anode and the same size mesh-plate Ti as the cathode. Wastewater flowed vertically through electrodes; the effective volume of the cell was 2.8 m(3), and the surface-to-volume ratio was 17.14 m(2) m(-3). The optimal current density was 100 A m(-2), and a suitable flow velocity was 14.0 m h(-1). The removal efficiencies for chemical oxygen demand and color in the effluent were over 60.0 and 84.0 %, respectively. In addition, the electro-oxidation system offered a good disinfection capability. The specific energy consumption for this industrial-scale device was 43.5 kWh kg COD(-1), with a current efficiency of 32.8 %, which was superior to the pilot-scale one. To meet the requirements for emission or reuse, the operation cost was $0.44 per ton of effluent at an average price for electricity of $0.11 kWh(-1).

  14. Inorganic ion-exchangers for the treatment and disposal of industrial effluents

    International Nuclear Information System (INIS)

    Hasany, S.M.

    2000-01-01

    Ion-exchangers can be broadly classified into organic and inorganic ion-exchangers. Inorganic ion-exchangers are stable at high temperatures and radiation dosage, resistant towards oxidizing agents and organic solvents. They are cheap and easy to prepare. Inorganic ion-exchangers, due to their superiority over organic ion-exchangers, have been extensively used for a wide variety of applications including treatment and management of industrial effluents. The criteria governing the division into essential and toxic elements for animal life have been described. The occupational sources of toxic elements and their compounds in the environment have been identified and their tolerance limits prescribed in air, water and food are given. The toxicity and adverse effects of harmful elements and their hazardous compounds are mentioned. Factors influencing sorption of trace elements onto inorganic ion-exchangers are highlighted. Examples of inorganic ion-exchangers are cited where they can be utilized for the treatment of industrial effluents before their safe discharge into waterways and biosphere. (author)

  15. Treatment and Energy Valorisation of an Agro-Industrial Effluent in Upflow Anaerobic Sludge Reactor (UASB)

    Science.gov (United States)

    Martins, Ramiro; Boaventura, Rui; Paulista, Larissa

    2017-12-01

    The accelerated growth of the population brings with it an increase in the generation of agro-industrial effluents. The inadequate discharge of these effluents significantly affects the quality of water resources. In this way, it becomes important to invest in treatment processes for agro-industrial effluents, particularly low-cost ones. In this context, the present study includes the design and construction of an UASB reactor and optimization of the anaerobic digestion treatment of the raw effluent from sweet chestnut production in the agro-industrial company Sortegel. The efficiency of the system was evaluated through the determination / monitoring of oxygen chemical oxygen demand (COD), biochemical oxygen demand (BOD5), total suspended solids (TSS), biogas production rate and quality (% methane). The reactor was fed for 25 weeks and operated under mesophilic conditions (temperature 30-40 °C). Different values were tested for the hydraulic retention time (HRT) and volumetric flow rate (VF): 0.66 days (VF=1509 L.m-3.d-1); 1.33 days (VF=755 L.m-3.d-1); 2.41 d days (VF=415 L.m-3.d-1). The average COD removal efficiency reached values of 69%, 82% and 75%, respectively, and simultaneously the associated BOD5 removal efficiency was 84%, 91% and 70%. As regards TSS, removal values were 78%, 94% and 63%. In addition, high methane production rates were obtained, between 2500 and 4800 L CH4.kg-1 COD removed d-1. For all the hydraulic retention times tested, high concentrations of methane in the biogas were recorded: 66-75%, 70% and 75% for HRT of 0.66, 1.33 and 2.41 days, respectively.

  16. Identification of filamentous bacteria in industrial waste water treatment plants; Identificacion de bacterias filamentosas en EDAR industriales

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, E.; Isac, L.; Fernandez, N.; Zornosa, A.; Mas, M.

    2008-07-01

    The operation of waste water treatment plants serving towns may be adversely affected by industrial effluents. To overcome this problem, industrial treatment plants should be put in place to purify such waste before it is poured into the sewer system. Twenty-seven such plants, located across Spain, mainly in the food industry, were studied and bulking found in 17 of them. Seventeen dominant morpho types were determined, of which the most important, in order of appearance, were TO21N, Thiotrix and Haliscomenobacter hydrossis. Of the other plants examined, 18% had de flocculation problems and 4% had viscosity problems. (Author) 21 refs.

  17. Anaerobic baffled reactor coupled with chemical precipitation for treatment and toxicity reduction of industrial wastewater.

    Science.gov (United States)

    Laohaprapanona, Sawanya; Marquesa, Marcia; Hogland, William

    2014-01-01

    This study describes the reduction of soluble chemical oxygen demand (CODs) and the removal of dissolved organic carbon (DOC), formaldehyde (FA) and nitrogen from highly polluted wastewater generated during cleaning procedures in wood floor manufacturing using a laboratory-scale biological anaerobic baffled reactor followed by chemical precipitation using MgCI2 .6H20 + Na2HPO4. By increasing the hydraulic retention time from 2.5 to 3.7 and 5 days, the reduction rates of FA, DOC and CODs of nearly 100%, 90% and 83%, respectively, were achieved. When the Mg:N:P molar ratio in the chemical treatment was changed from 1:1:1 to 1.3:1:1.3 at pH 8, the NH4+ removal rate increased from 80% to 98%. Biologically and chemically treated wastewater had no toxic effects on Vibrio fischeri and Artemia salina whereas chemically treated wastewater inhibited germination of Lactuca sativa owing to a high salt content. Regardless of the high conductivity of the treated wastewater, combined biological and chemical treatment was found to be effective for the removal of the organic load and nitrogen, and to be simple to operate and to maintain. A combined process such as that investigated could be useful for on-site treatment of low volumes of highly polluted wastewater generated by the wood floor and wood furniture industries, for which there is no suitable on-site treatment option available today.

  18. Fenton-biological treatment processes for the removal of some pharmaceuticals from industrial wastewater.

    Science.gov (United States)

    Badawy, Mohamed I; Wahaab, Rifaat A; El-Kalliny, A S

    2009-08-15

    A treatability study of pharmaceutical wastewater from El-Nasr Pharmaceutical and Chemical Company, South-East of Cairo, was carried out. The company discharges both industrial (6000 m(3)/d) and municipal wastewater (128 m(3)/d) into a nearby evaporation pond without any treatment. The generated raw wastewater is characterized by high values of COD (4100-13,023), TSS (20-330 mg/L), and oil grease (17.4-600 mg/L). In addition, the presence of refractory compounds decreases BOD/COD ratio (0.25-0.30). Analysis of raw wastewater confirmed that pre-treatment is required prior to discharge into public sewers to comply with the Egyptian Environmental laws and regulations. The obtained results indicated that the refractory compounds and their by-products cannot be readily removed by biological treatment and always remain in the treated effluent or adsorbed on the sludge flocs. The application of Fenton oxidation process as a pre-treatment improved the removal of pharmaceuticals from wastewater and appears to be an affective solution to achieve compliance with the law legislation with respect to discharge in a determined receptor medium.

  19. The workplace window view

    DEFF Research Database (Denmark)

    Lottrup, Lene Birgitte Poulsen; Stigsdotter, Ulrika K.; Meilby, Henrik

    2015-01-01

    Office workers’ job satisfaction and ability to work are two important factors for the viability and competitiveness of most companies, and existing studies in contexts other than workplaces show relationships between a view of natural elements and, for example, student performance...... and neighbourhood satisfaction. This study investigates whether relationships between window view, and work ability and job satisfaction also exist in the context of the workplace by focusing on office workers’ view satisfaction. The results showed that a view of natural elements was related to high view...... satisfaction, and that high view satisfaction was related to high work ability and high job satisfaction. Furthermore, the results indicated that job satisfaction mediated the effect of view satisfaction on work ability. These findings show that a view of a green outdoor environment at the workplace can...

  20. Window observers for linear systems

    Directory of Open Access Journals (Sweden)

    Utkin Vadim

    2000-01-01

    Full Text Available Given a linear system x ˙ = A x + B u with output y = C x and a window function ω ( t , i.e., ∀ t , ω ( t ∈ {0,1 }, and assuming that the window function is Lebesgue measurable, we refer to the following observer, x ˆ = A x + B u + ω ( t L C ( x − x ˆ as a window observer. The stability issue is treated in this paper. It is proven that for linear time-invariant systems, the window observer can be stabilized by an appropriate design under a very mild condition on the window functions, albeit for linear time-varying system, some regularity of the window functions is required to achieve observer designs with the asymptotic stability. The corresponding design methods are developed. An example is included to illustrate the possible applications

  1. Beam line windows at LAMPF

    International Nuclear Information System (INIS)

    Brown, R.D.; Grisham, D.L.; Lambert, J.E.

    1985-01-01

    The A-6 main beam-line window at LAMPF separates the vacuum of the main beam line from the isotope production station, proton irradiation ports, and the beam stop, which operate in air. This window must withstand the design beam current of 1 mA at 800 MeV for periods of at least 3000 hours without failure. The window is water cooled and must be strong enough to withstand the 2.1 MPa (300 psig) cooling water pressure, as well as beam-induced thermal stresses. Two designs have been used to meet these goals, a stepped-plate window and a hemispherical window, both made from a precipitation-hardened nickel base alloy, Alloy 718. Calculations of the temperatures and stresses in each of these windows are presented

  2. Windows with improved energy performance

    DEFF Research Database (Denmark)

    Noyé, Peter Anders; Laustsen, Jacob Birck; Svendsen, Svend

    2002-01-01

    . Heat loss through windows represents a considerably part of the total heat loss from houses. However windows provide a unique potential of solar energy gain to the building besides from providing daylight access and view. This results in a need for development of windows with improved energy...... performances. During the last 20 years the U-value of the glazing part of windows has been improved considerably, but the frame part has not followed the same development with respect to energy performance. Therefore an increasingly large part of the total heat loss through windows is relating to the frame...... part, for which reason, as far as energy efficiency and total economy are concerned, it has become more interesting to further develop frame structures. Traditionally, the energy performance of windows has primarily been characterised by the heat loss coefficient, U-value. However as the heat loss has...

  3. Improved Windows for Cold Climates

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2005-01-01

    A large part of the energy consumption in countries in Nordic and Arctic climates is used for space heating in buildings. In typical buildings the windows are responsible for a con-siderable part of the heat losses. Therefore there is a large potential for energy savings by developing and using...... windows with improved energy performance. Traditionally evaluation of the energy performance of windows has focused on the thermal transmittance, but as windows differ from the rest of the building envelope by allowing solar energy to enter the building, the total solar energy transmittance is equally...... important. In the heating season in cold climates the solar gain through windows can be utilized for space heating which results in a corresponding reduction in the energy production that is often based on fossil fuels. A suitable quantity for evaluating the energy performance of windows in a simple...

  4. Windows 7 The Missing Manual

    CERN Document Server

    Pogue, David

    2010-01-01

    In early reviews, geeks raved about Windows 7. But if you're an ordinary mortal, learning what this new system is all about will be challenging. Fear not: David Pogue's Windows 7: The Missing Manual comes to the rescue. Like its predecessors, this book illuminates its subject with reader-friendly insight, plenty of wit, and hardnosed objectivity for beginners as well as veteran PC users. Windows 7 fixes many of Vista's most painful shortcomings. It's speedier, has fewer intrusive and nagging screens, and is more compatible with peripherals. Plus, Windows 7 introduces a slew of new features,

  5. Subject Responses to Electrochromic Windows

    Energy Technology Data Exchange (ETDEWEB)

    Clear, Robert; Inkarojrit, Vorapat; Lee, Eleanor

    2006-03-03

    Forty-three subjects worked in a private office with switchable electrochromic windows, manually-operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3-60%. Analysis of subject responses and physical data collected during the work sessions showed that the electrochromic windows reduced the incidence of glare compared to working under a fixed transmittance (60%) condition. Subjects used the Venetian blinds less often and preferred the variable transmittance condition, but used slightly more electric lighting with it than they did when window transmittance was fixed.

  6. Live histograms in moving windows

    International Nuclear Information System (INIS)

    Zhil'tsov, V.E.

    1989-01-01

    Application of computer graphics for specific hardware testing is discussed. The hardware is position sensitive detector (multiwire proportional chamber) which is used in high energy physics experiments, and real-out electronics for it. Testing program is described (XPERT), which utilises multi-window user interface. Data are represented as histograms in windows. The windows on the screen may be moved, reordered, their sizes may be changed. Histograms may be put to any window, and hardcopy may be made. Some program internals are discussed. The computer environment is quite simple: MS-DOS IBM PC/XT, 256 KB RAM, CGA, 5.25'' FD, Epson MX. 4 refs.; 7 figs

  7. Thermal monitoring of gyrotron windows

    International Nuclear Information System (INIS)

    Huey, H.E.; Choi, E.; Hu, G.; Mundie, L.

    1983-01-01

    In a practical gyrotron device, the design of a reliable vacuum window to withstand high mean power densities is of utmost importance. Computer modelling of an actual window assumes a number of conditions including the power density profile, the electromagnetic wave attenuation constant of the window material and heat transfer coefficients. The last two factors can vary significantly with temperature. A technique for actually monitoring the real time temperature distribution over the window surface with an IR camera while the gyrotron is in operation has been developed. This measurement serves as an aid for developing the analysis of window designs. The ability to observe small hot spots due to tiny metallic specks on the window surface is also of great value in quality control and window failure prevention. The experimental arrangement involves an infrared camera (AGA780) with an indium antimonide detector (3-5 μm) observing the window through a grid pattern of tiny holes (cutoff for the 3rd harmonic of 60 GHz). A 12 0 FOV lens with a 12mm extension ring was used to defocus the grid. The thermal emissivity E /sub w/ approx. = 0.95. Thus, an IR measurement of the window is a surface temperature measurement. To minimize the problem of external reflections, the outside surface of the waveguide was painted black. This then requires a cool waveguide; room temperature is sufficient

  8. Microsoft Windows Operating System Essentials

    CERN Document Server

    Carpenter, Tom

    2012-01-01

    A full-color guide to key Windows 7 administration concepts and topics Windows 7 is the leading desktop software, yet it can be a difficult concept to grasp, especially for those new to the field of IT. Microsoft Windows Operating System Essentials is an ideal resource for anyone new to computer administration and looking for a career in computers. Delving into areas such as fundamental Windows 7 administration concepts and various desktop OS topics, this full-color book addresses the skills necessary for individuals looking to break into a career in IT. Each chapter begins with a list of topi

  9. Beginning Windows 8.1

    CERN Document Server

    Halsey, Mike

    2013-01-01

    Windows 8 has been described by Microsoft as its 'boldest' Windows release ever and the 8.1 update enhances the paradigm further. Beginning Windows 8.1 takes you through the new features and helps you get more out of the familiar to reveal the fullest possibilities for this amazing new operating system. You will learn, with non-technical language used throughout, how to get up and running in the new Windows interface, minimize downtime, maximize productivity, and harness the features you never knew existed to take control of your computer and enjoy the peace of mind and excitement that comes w

  10. Windows 7 the definitive guide

    CERN Document Server

    Stanek, William R

    2010-01-01

    This book provides everything you need to manage and maintain Windows 7. You'll learn all of the features and enhancements in complete detail, along with specifics for configuring the operating system to put you in full control. Bestselling author and Windows expert William Stanek doesn't just show you the steps you need to follow, he also tells you how features work, why they work, and how you can customize them to meet your needs. Learn how to squeeze every bit of power out of Windows 7 to take full advantage of its features and programs. Set up, customize, and tune Windows 7-Optimize its

  11. Pollution control in pulp and paper industrial effluents using integrated chemical-biological treatment sequences.

    Science.gov (United States)

    El-Bestawy, Ebtesam; El-Sokkary, Ibrahim; Hussein, Hany; Keela, Alaa Farouk Abu

    2008-11-01

    The main objective of the present study was to improve the quality of pulp and paper industrial wastewater of two local mills RAKTA and El-Ahlia, Alexandria, Egypt, and to bring their pollutant contents to safe discharge levels. Quality improvement was carried out using integrated chemical and biological treatment approaches after their optimization. Chemical treatment (alum, lime, and ferric chloride) was followed by oxidation using hydrogen peroxide and finally biological treatment using activated sludge (90 min for RAKTA and 60 min for El-Ahlia effluents). Chemical coagulation produced low-quality effluents, while pH adjustment during coagulation treatment did not enhance the quality of the effluents. Maximum removal of the tested pollutants was achieved using the integrated treatment and the pollutants recorded residual concentrations (RCs) of 34.67, 17.33, 0.13, and 0.43 mg/l and 15.0, 11.0, 0.0, and 0.13 mg/l for chemical oxygen demand (COD), biochemical oxygen demand (BOD5), tannin and lignin, and silica in RAKTA and El-Ahlia effluents, respectively, all of which were below their maximum permissible limits (MPLs) for the safe discharge into water courses. Specific oxygen uptake rate (SOUR) and sludge volume index (SVI) values reflect good conditions and healthy activated sludge. Based on the previous results, optimized conditions were applied as bench scale on the raw effluents of RAKTA and El-Ahlia via the batch chemical and the biological treatment sequences proposed. For RAKTA effluents, the sequence was as follows: (1) coagulation with 375 mg/l FeCl3, (2) oxidation with 50 mg/l hydrogen peroxide, and (3) biological treatment using activated sludge with 2,000 mg/l initial concentration and 90 min hydraulic retention time (HRT), while for El-Ahlia raw effluents, the sequence was (1) coagulation with 250 mg/l FeCl3, (2) oxidation with 45 mg/l hydrogen peroxide, and (3) biological treatment using activated sludge with 2,000 mg/l initial concentration and 60

  12. Possible applications of ferrate(VI in the treatment of industrial wastewater effluent in the laboratory

    Directory of Open Access Journals (Sweden)

    Nikolić-Bujanović Ljiljana N.

    2015-01-01

    Full Text Available This paper shows the effects of ferrate(VI application in the treatment of industrial wastewater effluent in laboratory conditions. Samples used are a mixture of wastewater effluent from various industrial plants whose composition was determined by analyzing samples before the ferrate(VI treatment. Determining physical-chemical characteristics of the samples showed very high chemical oxygen demand (COD and the concentrations of individual pollutants are higher than the maximum allowed. In the tested samples, the COD was from 18 (sample 1 to 580 times (sample 2 greater than allowed (allowed 45 - 150 mg/l, while the concentrations of certain metals were several times higher than allowed (Cu allowed 0,1 mg/l, Zn allowed 0,2 mg/l. Also, a high concentration of total phosphorus content (allowed 2 mg/l and fluoride was found (allowed 20 mg/l, 2-3 times higher than permissible. The applied Na2FeO4 was synthesized by electrochemical method and applied in situ. Physical-chemical testing of samples, after treatment with different amounts (2, 5, 8, and 10 ml of Na2FeO4, concentration of 8 g/l showed that ferrate(VI can be used as a multifunctional agent in the purification of industrial wastewater, where in the amount of contaminating matter is reduced below the maximum permitted level. It was demonstrated the high efficiency of ferrate(VI as a strong oxidant in the removal of total P and suspended materials. Also pointed out was the high sorption power of the generated ferric(IIIhydroxide, which with its developed surface absorbs 95,5% of the F- and removes it from the solution in the form of sludge. Showed a high efficiency of ferrate(VI in the total removal of P (70 to 99,5%, and F- (89 to 95,5%, but depending on the presence of the total COD value or the presence of the total organic substances. At high values of the COD major part of ferrate(VI is consumed in the oxidation of organic material and the formation of Fe(OH3, which accelerate the process

  13. Optimization of Wastewater Treatment Process in Industry “A Case Study of Hattar Industrial Estate Haripur”

    Directory of Open Access Journals (Sweden)

    Rahib Hussain

    2014-06-01

    Full Text Available This study was conducted with the objectives to analyze Ghee Mill effluents, search out low cost wastewater treatment and make the water suitable for irrigation. For this purpose Ghee Mill effluents were analyzed for 19 physico-chemical parameters twice, before and after treatment and were compared with Pakistan National Environmental Quality Standards (Pak-NEQS. The analytical results revealed that Total Suspended Solids (TSS, Chemical Oxygen Demand (COD and oil & grease were high. For identification of suitable treatment method, two different techniques were tested, coagulation and adsorption. The optimum dose of 35mg/L to 66 mg/L was identified as appropriate to remove suspended solids. For adsorption a column containing 0.2 mg/L was identified as suitable dose for removal of color and COD. The analytical results after treatments were complying with Pak-NEQS. Therefore, coagulation in combination with adsorption is herein recommended for treatment of Ghee Mill effluents.

  14. Treatment and Reuse of Wastewaters Discharged by Petroleum Industries (HMD/Algeria)

    Energy Technology Data Exchange (ETDEWEB)

    Sellami, MH, E-mail: sellami2000dz@gmail.com [Process Engineering Department, Laboratory of Process Engineering, Ouargla University (Algeria); Loudiyi, K [Renewable Energies Laboratory (REL) Al Akhawayne University, Ifrane (Morocco); Boubaker, MC; Habbaz, H [Process Engineering Department, Laboratory of Process Engineering, Ouargla University (Algeria)

    2015-12-23

    Industrial wastewaters discharged by petroleum industries contains: oil, heavy metals and chemicals used in the process of oil separation and treatment. These waters are a source of soil, water and air pollution, and lead a mortal danger to the ecosystem. Our aim in this work has an aspect that can contribute to the collective effort to address the enormous amount of water purges storage bins and reuse them to avoid any environmental damage. This was achieved by chemical treating of these wastewaters discharged from three different locations of Hassi Messaoud (HMD) petroleum field by flocculation with (C-5563) followed by coagulation with (C-2061) using two different acids as sequestering namely: Ascorbic and Citric acid. After experiments, the results showed that the wastewater can be treated without sequestering by adding 40 ppm of activated silicates. The best result was obtained by addition of 160 ppm of Ascorbic acid as sequestering agent and 20 ppm of activated silicates; resulting in removal of 92.81 % of suspended matter and 95.53 % of turbidity. Finally we concluded that this wastewater was satisfactorily treated and we recommend either inject it for enhanced oil recovery in industrial closest field (North field) to maintain the reservoir pressure and the improved rate recovery of oil reserves or reuse it in garden irrigation. In order to see the impact of the treated water on plants, irrigation tests have conducted on two types of plants (date palm and shaft apocalyptic) for one year. The tests showed that the thick layer of 5 cm and 0.08mm of particles diameter of dune sand removes most of remaining oil. The sand layer that fills the basin surrounding the shaft is removed and replaced every 06 months. So, Dune sand plays the role of natural filter. The garden plants appear and grow normally.

  15. Treatment and Reuse of Wastewaters Discharged by Petroleum Industries (HMD/Algeria)

    International Nuclear Information System (INIS)

    Sellami, MH; Loudiyi, K; Boubaker, MC; Habbaz, H

    2015-01-01

    Industrial wastewaters discharged by petroleum industries contains: oil, heavy metals and chemicals used in the process of oil separation and treatment. These waters are a source of soil, water and air pollution, and lead a mortal danger to the ecosystem. Our aim in this work has an aspect that can contribute to the collective effort to address the enormous amount of water purges storage bins and reuse them to avoid any environmental damage. This was achieved by chemical treating of these wastewaters discharged from three different locations of Hassi Messaoud (HMD) petroleum field by flocculation with (C-5563) followed by coagulation with (C-2061) using two different acids as sequestering namely: Ascorbic and Citric acid. After experiments, the results showed that the wastewater can be treated without sequestering by adding 40 ppm of activated silicates. The best result was obtained by addition of 160 ppm of Ascorbic acid as sequestering agent and 20 ppm of activated silicates; resulting in removal of 92.81 % of suspended matter and 95.53 % of turbidity. Finally we concluded that this wastewater was satisfactorily treated and we recommend either inject it for enhanced oil recovery in industrial closest field (North field) to maintain the reservoir pressure and the improved rate recovery of oil reserves or reuse it in garden irrigation. In order to see the impact of the treated water on plants, irrigation tests have conducted on two types of plants (date palm and shaft apocalyptic) for one year. The tests showed that the thick layer of 5 cm and 0.08mm of particles diameter of dune sand removes most of remaining oil. The sand layer that fills the basin surrounding the shaft is removed and replaced every 06 months. So, Dune sand plays the role of natural filter. The garden plants appear and grow normally

  16. A comprehensive review on pre-treatment strategy for lignocellulosic food industry waste: Challenges and opportunities.

    Science.gov (United States)

    Ravindran, Rajeev; Jaiswal, Amit Kumar

    2016-01-01

    Lignocellulose is a generic term used to describe plant biomass. It is the most abundant renewable carbon resource in the world and is mainly composed of lignin, cellulose and hemicelluloses. Most of the food and food processing industry waste are lignocellulosic in nature with a global estimate of up to 1.3 billion tons/year. Lignocellulose, on hydrolysis, releases reducing sugars which is used for the production of bioethanol, biogas, organic acids, enzymes and biosorbents. However, structural conformation, high lignin content and crystalline cellulose hinder its use for value addition. Pre-treatment strategies facilitate the exposure of more cellulose and hemicelluloses for enzymatic hydrolysis. The present article confers about the structure of lignocellulose and how it influences enzymatic degradation emphasising the need for pre-treatments along with a comprehensive analysis and categorisation of the same. Finally, this article concludes with a detailed discussion on microbial/enzymatic inhibitors that arise post pre-treatment and strategies to eliminate them. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. PERFORMANCE OF NEWLY CONFIGURED SUBMERGED MEMBRANE BIOREACTOR FOR AEROBIC INDUSTRIAL WASTEWATER TREATMENT

    Directory of Open Access Journals (Sweden)

    I Gede Wenten

    2012-02-01

    Full Text Available The application of membrane to replace secondary clarifier of conventional activated sludge, known as membrane bioreactor, has led to a small footprint size of treatment with excellent effluent quality. The use of MBR eliminates almost all disadvantages encountered in conventional wastewater treatment plant such as low biomass concentration and washout of fine suspended solids. However, fouling remains as a main drawback. To minimize membrane fouling, a new configuration of submerged membrane bioreactor for aerobic industrial wastewater treatment has been developed. For the new configuration, a bed of porous particle is applied to cover the submerged ends-free mounted ultrafiltration membrane. Membrane performance was assessed based on flux productivity and selectivity. By using tapioca wastewater containing high organic matter as feed solution, reasonably high and stable fluxes around 11 l/m2.h were achieved with COD removal efficiency of more than 99%. The fouling analysis also shows that the newly configured ends-free membrane bioreactor exhibits lower irreversible resistance compared with the submerged one. In addition, the performance of pilot scale system, using a membrane module  with 10 m2 effective area and reactor tank with 120 L volume, was also assessed. The flux achieved from the pilot scale system around 8 l/m2.h with COD removal of more than 99%. Hence, this study has demonstrated the feasibility of the newly configured submerged ends-free MBR at larger scale.

  18. Performance evaluation of integrated solid-liquid wastes treatment technology in palm oil industry

    Science.gov (United States)

    Amelia, J. R.; Suprihatin, S.; Indrasti, N. S.; Hasanudin, U.; Fujie, K.

    2017-05-01

    The oil palm industry significantly contributes to environmental degradation if without waste management properly. The newest alternative waste management that might be developed is by utilizing the effluent of POME anaerobic digestion with EFB through integrated anaerobic decomposition process. The aim of this research was to examine and evaluate the integrated solid-liquid waste treatment technology in the view point of greenhouse gasses emission, compost, and biogas production. POME was treated in anaerobic digester with loading rate about 1.65 gCOD/L/day. Treated POME with dosis of 15 and 20 L/day was sprayed to the anaerobic digester that was filled of 25 kg of EFB. The results of research showed that after 60 days, the C/N ratio of EFB decreased to 12.67 and 10.96 for dosis of treated POME 15 and 20 L/day, respectively. In case of 60 day decomposition, the integrated waste treatment technology could produce 51.01 and 34.34 m3/Ton FFB which was equivalent with 636,44 and 466,58 kgCO2e/ton FFB for dosis of treated POME 15 and 20 L/day, respectively. The results of research also showed that integrated solid-liquid wastes treatment technology could reduce GHG emission about 421.20 and 251.34 kgCO2e/ton FFB for dosis of treated POME 15 and 20 L/day, respectively.

  19. Modified natural zeolite as heterogeneous Fenton catalyst in treatment of recalcitrants in industrial effluent

    Directory of Open Access Journals (Sweden)

    Milton M. Arimi

    2017-04-01

    Full Text Available Industrial effluents with high recalcitrants should undergo post-treatment after biological treatment. The aim of this study was to use cheap and abundantly available natural materials to develop heterogeneous Fenton catalysts for the removal of colored recalcitrants in molasses distillery wastewater (MDW. The pellets of zeolite, which is naturally available in many countries, were modified by pre-treatment with sulphuric acid, nitric acid and hydrochloric acid, before embedding on them the ferrous ions. The effects of pH and temperature on heterogeneous Fenton were studied using the modified catalysts. The sulphuric acid-ferrous modified catalysts showed the highest affectivity which achieved 90% color and 60% TOC (total organic carbon removal at 150 g/L pellet catalyst dosage, 2 g/L H2O2 and 25 °C. The heterogeneous Fenton with the same catalyst caused improvement in the biodegradability of anaerobic effluent from 0.07 to 0.55. The catalyst was also applied to pre-treat the raw MDW and increased it's biodegradability by 4%. The color of the resultant anaerobic effluent was also reduced. The kinetics of total TOC removal was found to depend on operation temperature. It was best described by simultaneous first and second order kinetics model for the initial reaction and second order model for the rest of the reaction.

  20. Windows forensic analysis toolkit advanced analysis techniques for Windows 7

    CERN Document Server

    Carvey, Harlan

    2012-01-01

    Now in its third edition, Harlan Carvey has updated "Windows Forensic Analysis Toolkit" to cover Windows 7 systems. The primary focus of this edition is on analyzing Windows 7 systems and on processes using free and open-source tools. The book covers live response, file analysis, malware detection, timeline, and much more. The author presents real-life experiences from the trenches, making the material realistic and showing the why behind the how. New to this edition, the companion and toolkit materials are now hosted online. This material consists of electronic printable checklists, cheat sheets, free custom tools, and walk-through demos. This edition complements "Windows Forensic Analysis Toolkit, 2nd Edition", (ISBN: 9781597494229), which focuses primarily on XP. It includes complete coverage and examples on Windows 7 systems. It contains Lessons from the Field, Case Studies, and War Stories. It features companion online material, including electronic printable checklists, cheat sheets, free custom tools, ...

  1. A new web-based modelling tool (Websim-MILQ) aimed at optimisation of thermal treatments in the dairy industry

    NARCIS (Netherlands)

    Schutyser, M.A.I.; Straatsma, J.; Keijzer, P.M.; Verschueren, M.; Jong, de P.

    2008-01-01

    In the framework of a cooperative EU research project (MILQ-QC-TOOL) a web-based modelling tool (Websim-MILQ) was developed for optimisation of thermal treatments in the dairy industry. The web-based tool enables optimisation of thermal treatments with respect to product safety, quality and costs.

  2. Minimizing Waste from the Oil Industry: Scale Treatment and Scrap Recycling

    International Nuclear Information System (INIS)

    Lindberg, M.

    2002-01-01

    Naturally occurring radioactive material is technologically concentrated in the piping in systems in the oil and gas industry, especially in the offshore facilities. The activity, mainly Ra-226, in the scales in the systems are often at levels classified as low level radioactive waste (LSA) in the industry. When the components and pipes are descaled for maintenance or recycling purposes, usually by high-pressure water jetting, the LSA scales arising constitute a significant quantity of radioactive waste for disposal. A new process is under development for the treatment of scales, where the radioactive solids are separated from the inactive. This would result in a much smaller fraction to be deposited as radioactive waste. The radioactive part recovered from the scales will be reduced to a stable non-metallic salt and because the volume is significantly smaller then the original material, will minimize the cost for disposal. The pipes, that have been cleaned by high pressure water jetting can either be reused or free released by scrapping and melting for recycling

  3. Performances of nano filtration (NF) and reverse osmosis (RO) in textile industry waste water treatment

    International Nuclear Information System (INIS)

    Ellouze, E.; Souissi, S.; Ben Amar, R.; Ben Salah, A.; Jrad, A.

    2009-01-01

    Textile industry process (dyeing, bleaching, printing and finishing) require a high-water consumption generating high amounts of water. Reactive dyeing of 1Kg of cotton requires about 150 Litres of water and 40g reactive dye resulting in a large volume of strongly coloured effluents. This fact in combination with the current water scarcity makes necessary textile waste water reuse. In this paper experimental results obtained from the treatment by different membranes Micro filtration (MF), Nano filtration (NF) and Reverse Osmosis (RO) of Sitex industry waste water pretreated by biological activated sludge are presented and compared. The results obtained from direct Nano filtration performed at different transmembrane pressures (8 - 1 m - 2 for a Volumetric Concentration Factor (VCF) of 4 and that the osmotic pressure π= 4Bars. A high quality of treated effluent in term of colour removal and desalination was obtained for a VCF of 2: salinity retention rate (RR) 57 pour cent and discoloration almost 100 pour cent at pressure of 12 bar. While, the permeate flux obtained using the combination MF/RO at a different pressures 25 - 1 m- 2 for a VCF of 6 indicating an important fouling. In this case, the osmotic pressure varied from 6 to 28 bars. The optimum salinity and colour retention rate (RR) were 86 pour cent and 100 pour cent respectively obtained at a VCF of 2.

  4. Industrial wastewater advanced treatment via catalytic ozonation with an Fe-based catalyst.

    Science.gov (United States)

    Li, Xufang; Chen, Weiyu; Ma, Luming; Wang, Hongwu; Fan, Jinhong

    2018-03-01

    An Fe-based catalyst was used as a heterogeneous catalyst for the ozonation of industrial wastewater, and key operational parameters (pH and catalyst dosage) were studied. The results indicated that the Fe-based catalyst significantly improved the mineralization of organic pollutants in wastewater. TOC (total organic carbon) removal was high, at 78.7%, with a catalyst concentration of 200 g/L, but only 31.6% with ozonation alone. The Fe-based catalyst significantly promoted ozone decomposition by 70% in aqueous solution. Hydroxyl radicals (·OH) were confirmed to be existed directly via EPR (electron paramagnetic resonance) experiments, and ·OH were verified to account for about 34.4% of TOC removal with NaHCO 3 as a radical scavenger. Through characterization by SEM-EDS (field emission scanning electron microscope with energy-dispersive spectrometer), XRD (X-ray powder diffraction) and XPS (X-ray photoelectron spectroscopy), it was deduced that FeOOH on the surface of the catalyst was the dominant contributor to the catalytic efficiency. The catalyst was certified as having good stability and excellent reusability based on 50 successive operations and could be used as a filler simultaneously. Thereby, it is a promising catalyst for practical industrial wastewater advanced treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. New trends in the treatment of meat industry waste waters; Depuracion de aguas residuales de la industria carnica. Nueva tendencias

    Energy Technology Data Exchange (ETDEWEB)

    Diez, V.; Pozo, R. del [Universidad de Burgos. Burgos (Spain)

    2000-07-01

    In this work, several alternatives for the meat industry wastewater treatment are examined. It is also presented the way in which the new technologies are being applied to this sector, as well as the future tendencies in the development of treatment processes specially adapted for the meat industry. Authors expose which are the guidelines that, in their opinion, must rule the development of treatment systems based on the particular characteristics of this sector and the different troubles and limitations that came up when the new technologies have been applied to this kind of wastewater. (Author) 17 refs.

  6. Wastewater Treatment from Batik Industries Using TiO2 Nanoparticles

    Science.gov (United States)

    Arifan, Fahmi; Nugraheni, FS; Rama Devara, Hafiz; Lianandya, Niken Elsa

    2018-02-01

    Batik is cultural patterned fabric, and the this industries produce wastewater that can pollute the aquatic environment. Besides dyes, batik wastewater also contains synthetic compounds that are hard degraded, such as heavy metals, suspended solids, or organic compounds. In this study, photocatalitic membrane TiO2 coated plastic sheets have been used to degrade batik wastewater under solar exposure. A total of 8 pieces of catalyst sheets are added on 1000 ml of the waste, and managed to degrade 50.41% of the initial concentration during 5-days irradiation. In this study, several parameters of the water quality such as chemical oxygen demand (COD), biological oxygen demand (BOD), and total suspensed solids (TSS) of the wastewater were observed to be decreasing during photodegradation process. The catalyst sheet also is stable to be used repeatedly in wastewater treatment.

  7. The treatment and disposal of liquid waste in the nuclear power industry

    International Nuclear Information System (INIS)

    Lewis, J.B.

    1978-01-01

    Paper presented by the head of the Industrial Chemistry Group at AERE Harwell at a symposium held by the University of Newcastle upon Tyne (UK) in association with the Institute of Water Pollution Control and the Institution of Chemical Engineers in September 1977. Main headings are as follows: general introduction; units of measurement of radioactivity; environmental considerations (disposal authorisations, natural background, critical path approach, discharges to the sea, discharges to rivers); types of liquid waste (general, high level wastes, wastes from chemical processing stages, wastes from nuclear power stations, miscellaneous wastes); treatment techniques (general, evaporation, chemical precipitation, ion exchange, reverse osmosis, electrodialysis); disposal of radioactive concentrates (high level wastes, sludges, exhausted ion exchangers, etc.). It is concluded that the main task remaining is to find the best means of ultimate disposal of high level wastes. (U.K.)

  8. Evaluation of membrane bioreactor for advanced treatment of industrial wastewater and reverse osmosis pretreatment

    Science.gov (United States)

    2013-01-01

    The evaluation of a membrane bioreactor (MBR) for pretreatment of reverse osmosis (RO) in order to reuse and reclamation of industrial town wastewater treatment plant was investigated in this study. Performance of MBR effluent through water quality in term of parameters such as chemical oxygen demand (COD), total suspended solids (TSS), total nitrogen (TN) and total coliform (TC) were measured. Also Silt density index (SDI) was used as indicator for RO feed water. The results of this study demonstrated that MBR produce a high quality permeate water. Approximately 75%, 98%, 74% and 99.9% removal of COD, TSS, TN and TC were recorded, respectively. Also SDI of the permeate effluent from membrane was below 3 for most of the times. It means that pilot yield a high quality treated effluent from the membrane module which can be used as RO feed water. PMID:24355199

  9. Biological treatment of gaseous emissions containing dimethyl sulphide generated from pulp and paper industry.

    Science.gov (United States)

    Giri, Balendu Shekher; Pandey, R A

    2013-08-01

    A bench scale biofilter packed with compost and wood chips seeded with potential DMS degrading culture (Bacillus sphaericus) could efficiently remove DMS from ambient air with removal efficiency (RE%) of 71 ± 11 at an effective bed contact time (EBCT) of 360 ± 20s with loading rate in the range of 4-28 gDMS/m(3)/h. Further, the same biofilter operated for the treatment of vent gas generated from a P&P industry indicated DMS removal of 61 ± 18% at optimal EBCT of 360 ± 25s with a loading rate in the range of 3-128 gDMS/m(3)/h. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Thermal treatments available for destruction of industrial wastes. Application to the incineration of radioactive wastes

    International Nuclear Information System (INIS)

    Chevalier, Gerard.

    1981-08-01

    Both the collecting and processing circuits and the physicochemical laws of combustion and thermal degradation of industrial wastes are recalled. The various incineration processes are reviewed considering especially conversion of refuse to energy and recovery of raw materials either before or after treatment. Wastes are devided into three classes according to their physical state: solid, liquid or sludge, gas. Some processes based on pyrolysis in the absence of air or at sub-stoichiometric levels are presented. A similar study is carried out on radioactive wastes, taking into account the particular aspects raised by incineration. Operational devices are described and some lines of research about the application of new techniques are summarized. The results derived from laboratory or pilot plant experiments are presented [fr

  11. Dynamical Modelling of a Wastewater Treatment Process of the Metallurgical Industry

    Directory of Open Access Journals (Sweden)

    David Warichet

    2007-03-01

    Full Text Available In this paper we consider the dynamical modelling and parameter identification of a biological wastewater treatment process from the galvanisation industry used to remove a mixture of organic matter and surface-active agents. In the present study we have considered mainly the measurements of dissolved oxygen and COD (Chemical Oxygen Demand collected on laboratory and pilot-scale processes. From the identification study, we can conclude that the degradation is characterized by two reactions: one part of the easily biodegradable effluent is degraded with fast kinetics while the remaining part of the effluent is degraded via a slower reaction. This has been modelled by considering two different classes of substrates that indeed correspond to real components of the mixture.

  12. Management Recommendations for Improving Decentralized Wastewater Treatment by the Food and Beverage Industries in Nigeria

    Directory of Open Access Journals (Sweden)

    Olajumoke F. Kayode

    2018-03-01

    Full Text Available The main aim of this study was to identify the enabling conditions that can lead to better wastewater management by industries (non-oil and gas sector in Nigeria. The relevant data and information’s required for this study were obtained through semi-structured interviews with different stakeholders in the Nigerian environmental sector. The lack of financial capability, technical expertise, and environmental awareness was envisaged as the main reason for non-compliance. According to the results, the enabling conditions that can lead to better decentralized wastewater management are government support, improved legal and regulatory framework, increased capacity, and skills of the regulators and financial arrangements for implementing environmental policies and treatment technologies in polluting facilities.

  13. E-beam Irradiation and Activated Sludge System for Treatment of Textiles and Food Base Industrial Waste Water

    International Nuclear Information System (INIS)

    Khomsaton Abu Bakar; Selambakkanu, S.; Jamaliah Sharif

    2011-01-01

    The combination of irradiation and biological technique was chosen to study COD, BOD5 and colour removal from textiles effluent in the presence of food industry wastewater. Two biological treatments, the first consisting a mix of non irradiated textile and food industry wastewater and the second a mix of irradiated textiles wastewater and food industry wastewater were operated in parallel. Reduction percentage of COD in textiles wastewater increased from 29.4 % after radiation only to 62.4 % after further undergoing biological treatment. After irradiation the BOD5 of textiles wastewater reduced by 22.1 %, but reverts to the original value of 36 mg/l after undergoing biological treatment. Colour had decreased from 899.5 ADMI to 379.3 ADMI after irradiation and continued to decrease to 109.3 ADMI after passing through biological treatment. (author)

  14. E-beam irradiation and activated sludge system for treatment of mixed textiles and food base industrial waste water

    International Nuclear Information System (INIS)

    Khomsaton Abu Bakar; Selambakkannu, S; Jamaliah Sharif; Khairul Zaman Mohd Dahlan; Ming, T.T.; Natasha Isnin; Hasnul Nizam Osman

    2012-01-01

    The combination of irradiation and biological technique was chosen to study COD, BOD 5 and colour removal from textiles effluent in the presence of food industry waste water. Two biological treatments, the first consisting a mix of non irradiated textile and food industry waste water and the second a mix of irradiated textiles waste water and food industry waste water were operated in parallel. Reduction percentage of COD in textiles waste water increased from 29.4 % after radiation to 62.4 % after further undergoing biological treatment. After irradiation, the BOD 5 of textiles waste water was reduced by 22.1 % but reverted to the original value of 36 mg/ L after undergoing biological treatment. Colour had decreased from 899.5 ADMI to 379.3 ADMI after irradiation and continued to decrease to 109.3 ADMI after passing through biological treatment. (author)

  15. Treatment of real industrial wastewater using the combined approach of advanced oxidation followed by aerobic oxidation.

    Science.gov (United States)

    Ramteke, Lokeshkumar P; Gogate, Parag R

    2016-05-01

    Fenton oxidation and ultrasound-based pretreatment have been applied to improve the treatment of real industrial wastewater based on the use of biological oxidation. The effect of operating parameters such as Fe(2+) loading, contact time, initial pH, and hydrogen peroxide loading on the extent of chemical oxygen demand (COD) reduction and change in biochemical oxygen demand (BOD5)/COD ratio has been investigated. The optimum operating conditions established for the pretreatment were initial pH of 3.0, Fe(2+) loading of 2.0, and 2.5 g L(-1) for the US/Fenton/stirring and Fenton approach, respectively, and temperature of 25 °C with initial H2O2 loading of 1.5 g L(-1). The use of pretreatment resulted in a significant increase in the BOD5/COD ratio confirming the production of easily digestible intermediates. The effect of the type of sludge in the aerobic biodegradation was also investigated based on the use of primary activated sludge (PAS), modified activated sludge (MAS), and activated sludge (AS). Enhanced removal of the pollutants as well as higher biomass yield was observed for MAS as compared to PAS and AS. The use of US/Fenton/stirring pretreatment under the optimized conditions followed by biological oxidation using MAS resulted in maximum COD removal at 97.9 %. The required hydraulic retention time for the combined oxidation system was also significantly lower as compared to only biological oxidation operation. Kinetic studies revealed that the reduction in the COD followed a first-order kinetic model for advanced oxidation and pseudo first-order model for biodegradation. The study clearly established the utility of the combined technology for the effective treatment of real industrial wastewater.

  16. Learning Windows Azure Mobile Services for Windows 8 and Windows Phone 8

    CERN Document Server

    Webber-Cross, Geoff

    2014-01-01

    This book is based around a case study game which was written for the book. This means that the chapters progress in a logical way and build upon lessons learned as we go. Real-world examples are provided for each topic that are practical and not given out-of-context so they can be applied directly to other applications.If you are a developer who wishes to build Windows 8 and Phone 8 applications and integrate them with Windows Azure Mobile Services, this book is for you. Basic C# and JavaScript skills are advantageous, as well as some knowledge of building Windows 8 or Windows Phone 8 applica

  17. Window prototypes during the project

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1996-01-01

    The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described.......The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described....

  18. Thermal bridges of modern windows

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Møller, Eva B.; Nielsen, Anker

    2013-01-01

    With its focus on reduced energy consumption, contemporary housing construction requires a highly insulated and airtight building envelope with as few thermal bridges as possible.Windows must be carefully designed, as thermal bridges can lead to surface condensation or mold growth, even if the wi......With its focus on reduced energy consumption, contemporary housing construction requires a highly insulated and airtight building envelope with as few thermal bridges as possible.Windows must be carefully designed, as thermal bridges can lead to surface condensation or mold growth, even...... if the window has an U-factor of 1 W/(m2·K) or lower. This paper describes the development of modern, energy efficient Danish windows with reduced thermal bridges. It focuses on materials, geometry, and sealing of window panes based on a literature review. Examples of modern windows are presented. Experience...... been an important driver for the development of new window solutions in Denmark, increasing the inner-surface temperature at the sealing of window panes. However, it will not stop complaints fromconsumers, as this temperature is calculated under standardized conditions. Increasing requirements...

  19. Inventions on Displaying and Resizing Windows

    OpenAIRE

    Mishra, Umakant

    2014-01-01

    Windows are used quite frequently in a GUI environment. The greatest advantage of using windows is that each window creates a virtual screen space. Hence, although the physical screen space is limited to a few inches, use of windows can create unlimited screen space to display innumerable items. The use of windows facilitates the user to open and interact with multiple programs or documents simultaneously in different windows. Sometimes a single program may also open multiple windows to displ...

  20. Destiny's Earth Observation Window

    Science.gov (United States)

    2002-01-01

    Astronaut Michael J. Bloomfield, STS-110 mission commander, looks through the Earth observation window in the Destiny laboratory aboard the International Space Station (ISS). The STS-110 mission prepared the ISS for future spacewalks by installing and outfitting the S0 (S-zero) truss and the Mobile Transporter. The 43-foot-long S0 Truss, weighing in at 27,000 pounds, was the first of 9 segments that will make up the Station's external framework that will eventually stretch 356 feet (109 meters), or approximately the length of a football field. This central truss segment also includes a flatcar called the Mobile Transporter and rails that will become the first 'space railroad,' which will allow the Station's robotic arm to travel up and down the finished truss for future assembly and maintenance. The completed truss structure will hold solar arrays and radiators to provide power and cooling for additional international research laboratories from Japan and Europe that will be attached to the Station. Milestones of the STS-110 mission included the first time the ISS robotic arm was used to maneuver spacewalkers around the Station and marked the first time all spacewalks were based out of the Station's Quest Airlock. It was also the first Shuttle to use three Block II Main Engines. The Space Shuttle Orbiter Atlantis, STS-110 mission, was launched April 8, 2002 and returned to Earth April 19, 2002.

  1. Improved Windows for Cold Climates

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2005-01-01

    considerably by reducing the frame width, which results in a larger transparent area causing a larger solar gain but still main-taining a low thermal transmittance. Using three layers of glass with large gaps, using very slim frame profiles, and omitting the edge constructions that normally causes thermal...... windows with improved energy performance. Traditionally evaluation of the energy performance of windows has focused on the thermal transmittance, but as windows differ from the rest of the building envelope by allowing solar energy to enter the building, the total solar energy transmittance is equally...... important. In the heating season in cold climates the solar gain through windows can be utilized for space heating which results in a corresponding reduction in the energy production that is often based on fossil fuels. A suitable quantity for evaluating the energy performance of windows in a simple...

  2. Windows for tablets for dummies

    CERN Document Server

    Rathbone, Andy

    2013-01-01

    Just for you--Windows 8 from the tablet user's perspective If you're an experienced Windows user, you don't need a guide to everything that Windows 8 can do, just to those tools and functions that work on your tablet. And so here it is. This new book zeros in on what you need to know to work best on your tablet with Windows 8. Topics include navigating the new Windows 8 interface and how it works on a touchscreen, how to safely connect to the Internet, how to work with apps or share your tablet in a group, and much more. If you're a new tablet user, you'll particularly appre

  3. Handbook on Windows and Energy

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Schultz, Jørgen Munthe; Svendsen, Sv Aa Højgaard

    transmission through windows is described in detail including radiation, convection and conduction as well as solar transmittance of window glazing. The most used terms related to characterization of window energy performance are defined and calculation methods according to international standards...... flow and detailed calculation of light and solar transmittance is given.Different measurement techniques for characterization of window heat loss coefficient and total solar energy transmittance is described and references to interantional standards are given.Finally, the handbook includes...... a comprehensive list of window related standards and a list of Nordic research and development projects.Two programs are encloased in the handbook for calculation of solar radiation on inclined surfaces including a shadow correction and a simple program for evaluation of energy savings and risk of overtemperature....

  4. False Windows - Yesterday and Today

    Science.gov (United States)

    Niewitecki, Stefan

    2017-10-01

    The article is concerned with a very interesting aspect of architectural design, namely, a contradiction between the building functions and the necessity of giving the building a desired external appearance. One of the possibilities of reconciling this contradiction is using pseudo windows that are visible on the elevation and generally have the form of a black painted recess accompanied by frames and sashes and often single glazing. Of course, there are no windows or openings in the corresponding places in the walls inside the building. The article discusses the differences between false windows and blind widows (German: blende), also known as blank windows, which, in fact, are shallow recesses in the wall having the external appearance of an arcade or a window and which had already been used in Gothic architecture mostly for aesthetic reasons and sometimes to reduce the load of the wall. Moreover, the article describes various false windows that appeared later than blind windows because they did not appear until the 17th century. Contemporary false windows are also discussed and it is shown that contrary to the common belief they are widely used. In his research, the author not only used the Internet data but also carried out his own in situ exploration. The false windows constitute very interesting albeit rare elements of the architectural design of buildings. They have been used successfully for a few hundred years. It might seem that they should have been discarded by now but this has not happened. Quite contrary, since the second half of the 20th century there has been a rapid development of glass curtain walls that serve a similar function in contemporary buildings as the false windows once did, only in a more extensive way.

  5. A Comprehensive Study on the Application of Reverse Osmosis (RO) Technology for the Petroleum Industry Wastewater Treatment

    OpenAIRE

    Shahryar Jafarinejad

    2017-01-01

    Large quantities of oily wastewaters can be generated from the activities and processes in the petroleum industry which draining of these effluents not only pollutes the environment but also reduces the yield of oil and water. Therefore, development of treatment processes for petroleum industry wastewaters is vital in order to prevent serious environmental damage and provide a source of water for beneficial use. Reverse osmosis (RO) can be the most common membrane process used for desalinatio...

  6. Impact of aerobic stabilization on the characteristics of treatment sludge in the leather tanning industry.

    Science.gov (United States)

    Cokgor, Emine Ubay; Aydinli, Ebru; Tas, Didem Okutman; Zengin, Gulsum Emel; Orhon, Derin

    2014-01-01

    The efficiency of aerobic stabilization on the treatment sludge generated from the leather industry was investigated to meet the expected characteristics and conditions of sludge prior to landfill. The sludge types subjected to aerobic stabilization were chemical treatment sludge, biological excess sludge, and the mixture of both chemical and biological sludges. At the end of 23 days of stabilization, suspended solids, volatile suspended solids and total organic carbon removal efficiencies were determined as 17%, 19% and 23% for biological sludge 31%, 35% and 54% for chemical sludge, and 32%, 34% and 63% for the mixture of both chemical and biological sludges, respectively. Model simulations of the respirometric oxygen uptake rate measurements showed that the ratio of active biomass remained the same at the end of the stabilization for all the sludge samples. Although mixing the chemical and biological sludges resulted in a relatively effective organic carbon and solids removal, the level of stabilization achieved remained clearly below the required level of organic carbon content for landfill. These findings indicate the potential risk of setting numerical restrictions without referring to proper scientific support.

  7. Microbubble enhanced ozonation process for advanced treatment of wastewater produced in acrylic fiber manufacturing industry

    KAUST Repository

    Zheng, Tianlong

    2015-02-02

    This work investigated microbubble-ozonation for the treatment of a refractory wet-spun acrylic fiber wastewater in comparison to macrobubble-ozonation. CODcr, NH3-N, and UV254 of the wastewater were removed by 42%, 21%, and 42%, respectively in the microbubble-ozonation, being 25%, 9%, and 35% higher than the removal rates achieved by macrobubble-ozonation at the same ozone dose. The microbubbles (with average diameter of 45μm) had a high concentration of 3.9×105 counts/mL at a gas flow rate of 0.5L/min. The gas holdup, total ozone mass-transfer coefficient, and average ozone utilization efficiency in the microbubble-ozonation were 6.6, 2.2, and 1.5 times higher than those of the macrobubble-ozonation. Greater generation of hydroxyl radicals and a higher zeta potential of the bubbles were also observed in the microbubble ozonation process. The biodegradability of the wastewater was also significantly improved by microbubble-ozonation, which was ascribed to the enhanced degradation of alkanes, aromatic compounds, and the many other bio-refractory organic compounds in the wastewater. Microbubble-ozonation can thus be a more effective treatment process than traditional macrobubble-ozonation for refractory wastewater produced by the acrylic fiber manufacturing industry.

  8. Palm oil mill effluent treatment and utilization to ensure the sustainability of palm oil industries.

    Science.gov (United States)

    Hasanudin, U; Sugiharto, R; Haryanto, A; Setiadi, T; Fujie, K

    2015-01-01

    The purpose of this study was to evaluate the current condition of palm oil mill effluent (POME) treatment and utilization and to propose alternative scenarios to improve the sustainability of palm oil industries. The research was conducted through field survey at some palm oil mills in Indonesia, in which different waste management systems were used. Laboratory experiment was also carried out using a 5 m(3) pilot-scale wet anaerobic digester. Currently, POME is treated through anaerobic digestion without or with methane capture followed by utilization of treated POME as liquid fertilizer or further treatment (aerobic process) to fulfill the wastewater quality standard. A methane capturing system was estimated to successfully produce renewable energy of about 25.4-40.7 kWh/ton of fresh fruit bunches (FFBs) and reduce greenhouse gas (GHG) emissions by about 109.41-175.35 kgCO2e/tonFFB (CO2e: carbon dioxide equivalent). Utilization of treated POME as liquid fertilizer increased FFB production by about 13%. A palm oil mill with 45 ton FFB/hour capacity has potential to generate about 0.95-1.52 MW of electricity. Coupling the POME-based biogas digester and anaerobic co-composting of empty fruit bunches (EFBs) is capable of adding another 0.93 MW. The utilization of POME and EFB not only increases the added value of POME and EFB by producing renewable energy, compost, and liquid fertilizer, but also lowers environmental burden.

  9. Problems Caused by Microbes and Treatment Strategies Downstream Petroleum Microbiology - An Industry Perspective

    Science.gov (United States)

    McFarlane, Elaine

    In the mid 1800's it was discovered that crude oil could be extracted and exploited to produce energy. However, it was the invention of the first four-stroke internal combustion engine in 1876 that transformed the petroleum industry from a localised to a global business (Dell and Rand, 2004). Crude oil is made into useable products at the refinery via separation, conversion and treatment processes. Separation starts with distillation where the crude is evaporated and condensed into fractions based on their boiling ranges (Fig. 19.1). As well as carbon and hydrogen, the fractions consist of sulphur, nitrogen and oxygen (present in low concentrations) and metals like copper and iron (in trace amounts). After separation, heavy fractions are converted into lighter ones using intense heat, pressure and a catalyst to speed up chemical reactions. Molecules like sulphur can then be stripped out by heat treatment under pressure with hydrogen. Injection of refinery additives makes a finished fuel. For example, static dissipator is added to Automotive Gas Oil (AGO) to reduce the risk of spark and explosion during fuel movements; middle distillate flow improver to improve low temperature operability and lubricity improver to lubricate engine components. Finally, fuel quality measurements are made to ensure that the finished fuel meets the relevant specification.

  10. New procedure for the control of the treatment of industrial effluents to remove volatile organosulfur compounds.

    Science.gov (United States)

    Boczkaj, Grzegorz; Makoś, Patrycja; Fernandes, André; Przyjazny, Andrzej

    2016-10-01

    We present a new procedure for the determination of volatile organosulfur compounds in samples of industrial effluents using dispersive liquid-liquid microextraction and gas chromatography with flame photometric detection. Initially, the extraction parameters were optimized. These included: type and volume of extraction solvent, volume of disperser solvent, salting out effect, pH, time and speed of centrifugation as well as extraction time. The procedure was validated for 30 compounds. The developed procedure has low detection limits of 0.0071-0.49 μg/L and a good precision (relative standard deviation values of 1.2-5.0 and 0.6-4.1% at concentrations of 1 and 10 μg/L, respectively). The procedure was used to determine the content of volatile organosulfur compounds in samples of effluents from the production of bitumens before and after chemical treatment, in which six compounds were identified, including 2-mercaptoethanol, thiophenol, thioanisole, dipropyl disulfide, 1-decanethiol, and phenyl isothiocyanate at concentrations ranging from 0.47 to 8.89 μg/L. Problems in the determination of organosulfur compounds related to considerable changes in composition of the effluents, increase in concentration of individual compounds and appearance of secondary pollutants during effluent treatment processes are also discussed. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Effect of using dissolved air flotation system on industrial wastewater treatment in pilot scale

    International Nuclear Information System (INIS)

    Yahya, Habibzadeh

    2010-01-01

    In the present paper the application of Dissolved Air Flotation (DAF) system for wastewater treatment, especially for industrial wastewater on a designed pilot system has been investigated. It is for the first time in dissolved air flotation system that instead of air dissolving tube, hydro cyclone technology is used to dissolve air in water with ratio of 1:1 (almost 100 percent) in the form of small air bubbles and a circular flotation tank instead of rectangular tank. The advantage of usage of circular tank in DAF system is the capability of being treated in higher rate of mass, so less space is needed. Although application of hydro cyclone with different diameters of holes for producing mixing energy which also has the capability of direct injection of chemical coagulant and polymeric materials leads to the higher efficiency of treatment and so reduces the cost of pump and consumed air. Investigations on the efficiency of this system was done by providing and analyzing samples of wastewater with and without adding of PAC (Poly-Aluminium-Chloride). Sampling and analyzing was done according to standard methods. The results of the analyses show that pilot system has high efficiency, especially for oil removal

  12. Possibilities for Hospital Treatment of Industrial Accident Victims in Military Medical Academy

    International Nuclear Information System (INIS)

    Todorovic, V.; Jevtic, M.; Jovanovic, D.; Jovic-Stosic, J.

    2007-01-01

    Possibility of mass injuries in traffic, industrial accidents or terrorist attack is every day reality. Management of victims may need complex measures including activities on the site, transportation, and hospital care. Preparedness for hospital treatment of mass trauma or poisoning is among the main duties of Military Medical Academy (MMA). It is medical institution of tertiary level with the capacity of 1214 beds in 13 surgical clinics, 12 internal medicine clinics, 2 neuropsychiatry clinics, poison control centre and organ transplantation centre. National Poison Control Centre is the only specialized institution for treatment of adult's acute poisonings in the country. Centre includes: 1. Clinic of Toxicology and Clinical Pharmacology with Intensive Care Unit and Toxicology Information Department; 2. Institute of Experimental Toxicology and Pharmacology; 3. Mobile Toxicological - Chemical Squad. Being a part of MMA, Centre benefits from all advantages of central type hospital, including possibilities for contemporary diagnostic and therapeutic procedures of different specialities, and other necessary medical and logistic support. Except hospital organization and preparedness for admission of mass injuries victims, one of strategic goals of MMA is functional integration in civilian health care system including more detailed planning for collaboration in case of chemical accidents.(author)

  13. Treatment of Industrial Liquid Waste of Steel Plating by Coagulation-Flocculation Using Sodium Biphosphate

    International Nuclear Information System (INIS)

    Subiarto; Herlan Martono

    2007-01-01

    Research about treatment of industrial liquid waste of steel plating by coagulation-flocculation using sodium biphosphate have been conducted. The purpose of the treatment was the content reduction of Cr, Ni, and Cu in the liquid waste, so that produced effluent with Cr, Ni, and Cu content until they laid under mutual standard. The variables studied in this process were the solution pH, the coagulant/waste volume comparison, the speed of the fast stirring, and the time of the fast stirring. Optimum separation efficiency on coagulation-flocculation process of liquid waste of steel plating using sodium biphosphate at the condition of solution ph 9, coagulant/waste volume comparation 1.50, the speed of the fast stirring 400 rpm, and the time of fast stirring is 5 minute. Low stirring was conducted at 60 rpm for 60 minute. The yields of optimum separation efficiency in this condition were 99.48 % for Cr, 99.51 % for Ni, and 99.03 % for Cu. (author)

  14. A Comprehensive Study on the Application of Reverse Osmosis (RO Technology for the Petroleum Industry Wastewater Treatment

    Directory of Open Access Journals (Sweden)

    Shahryar Jafarinejad

    2017-10-01

    Full Text Available Large quantities of oily wastewaters can be generated from the activities and processes in the petroleum industry which draining of these effluents not only pollutes the environment but also reduces the yield of oil and water. Therefore, development of treatment processes for petroleum industry wastewaters is vital in order to prevent serious environmental damage and provide a source of water for beneficial use. Reverse osmosis (RO can be the most common membrane process used for desalination from oily wastewater and can produce water suitable for reuse at the petroleum industry. In this study, the application of RO technology for the petroleum industry wastewater treatment in different laboratory, pilot, field, and industrial scales have been reviewed. In addition, membrane fouling control, performance efficiency, treatment system configurations, pretreatment methods, quality of treated water, and economic issues have been investigated. With mixtures as complex as petroleum industry wastewaters, membrane fouling becomes a significant hurdle to implement the RO-based purification system. Operating the system within the critical flux range or adding chemicals, and/or pretreatment can usually control membrane fouling. Salt rejection of RO membranes can be 99% or higher.

  15. Monitoring and troubleshooting of non-filamentous settling and dewatering problems in an industrial activated sludge treatment plant

    DEFF Research Database (Denmark)

    Kjellerup, B. V.; Keiding, Kristian; Nielsen, Per Halkjær

    2001-01-01

    A large industrial activated sludge wastewater treatment plant had temporary problems with settling and dewatering of the sludge. Microscopical investigations revealed that the poor settling properties were not due to presence of filamentous bacteria, but poor floc properties. In order to charact......A large industrial activated sludge wastewater treatment plant had temporary problems with settling and dewatering of the sludge. Microscopical investigations revealed that the poor settling properties were not due to presence of filamentous bacteria, but poor floc properties. In order...... dewaterability. The monitoring program revealed that a deterioration of the floc strength and the settling properties in the process tanks was closely connected to downstream dewatering problems and poor effluent quality. Particularly severe problems were observed a few weeks after the production at the factory...... at this industrial plant. The described strategy can be useful in general to find and solve many solid/liquid separation problems in activated sludge wastewater treatment plants....

  16. Arsenite oxidizing multiple metal resistant bacteria isolated from industrial effluent: their potential use in wastewater treatment.

    Science.gov (United States)

    Naureen, Ayesha; Rehman, Abdul

    2016-08-01

    Arsenite oxidizing bacteria, isolated from industrial wastewater, showed high resistance against arsenite (40 mM) and other heavy metals (10 mM Pb; 8 mM Cd; 6 mM Cr; 10 mM Cu and 26.6 mM As(5+)). Bacterial isolates were characterized, on the basis of morphological, biochemical and 16S rRNA ribotyping, as Bacillus cereus (1.1S) and Acinetobacter junii (1.3S). The optimum temperature and pH for the growth of both strains were found to be 37 °C and 7. Both the strains showed maximum growth after 24 h of incubation. The predominant form of arsenite oxidase was extracellular in B. cereus while in A. junii both types of activities, intracellular and extracellular, were found. The extracellular aresenite oxidase activity was found to be 730 and 750 µM/m for B. cereus and A. junii, respectively. The arsenite oxidase from both bacterial strains showed maximum activity at 37 °C, pH 7 and enhanced in the presence of Zn(2+). The presence of two protein bands with molecular weight of approximately 70 and 14 kDa in the presence of arsenic points out a possible role in arsenite oxidation. Arsenite oxidation potential of B. cereus and A. junii was determined up to 92 and 88 % in industrial wastewater after 6 days of incubation. The bacterial treated wastewater improved the growth of Vigna radiata as compared to the untreated wastewater. It indicates that these bacterial strains may find some potential applications in wastewater treatment systems to transform toxic arsenite into less toxic form, arsenate.

  17. Adaptive wall treatment for a second moment closure in the industrial context

    International Nuclear Information System (INIS)

    Wald, Jean-Francois

    2016-01-01

    CFD computations of turbulent flows always begin with a complex meshing process (upper plenum, fuel assembly in the nuclear industry for example). Geometrical constraints are the first ones to be satisfied (level of details, important zones to refine regarding 'user experiences'). One has however to satisfy constraints that are inherent to the RANS model (Reynolds Averaged Navier Stokes) used for the computation. For example, if a 'High-Reynolds' (κ-ε standard, SSG,...) model is used one should only have wall cells with a dimensionless distance to the wall greater or equal to 20 to justify the use of the universal 'law of the wall'. On the other hand, if a 'Low-Reynolds' (BL-v 2 /k, EB-RSM,...) model is used, one should only find wall cells with a dimensionless distance to the wall below 1. If those models are used in an inappropriate way the results could be dramatic (computations can either diverge or give unphysical results). This thesis proposes the development of a new turbulence model with adaptive wall treatments that gives satisfactory results on all types of meshes. In particular, the model will be able to cope with meshes containing both 'High-Reynolds' and 'Low-Reynolds' wall cells. Given the complex flows encountered in the nuclear industry this thesis will use a model known for its good behavior: the EB-RSM model. This model is able to reproduce the anisotropy of the turbulence and give more satisfactory results than eddy viscosity models in different configurations. This model is available in Code Saturne, an open source code developed at EDF. All the developments are made in this code. (author)

  18. Anaerobic treatment of wastewater from the household and personal products industry in a hybrid bioreactor

    Directory of Open Access Journals (Sweden)

    D. J. Araujo

    2008-09-01

    Full Text Available The anaerobic treatment of wastewater from the household and personal products industry was studied using a 16.3 L hybrid reactor (UASB and biofilter. The top of the UASB reactor was filled with coconut shells to act as the support material for the biofilter. The wastewater was characterized in terms of pH (1.0 - 12.0, COD (1,000 - 5,000 mg/L, BOD5 (700 - 1,500 mg/L, chloride (55 - 850 mg/L, ammonia nitrogen (0.4 - 0.9 mg/L, total Kjeldahl nitrogen (22.1 - 34.0 mg/L, phosphorus (2.0 - 2.5 mg/L, anionic surfactants (100 - 600 mg/L, turbidity (115 - 300 NTU and total suspended solids (450 - 1,440 mg/L. The bioreactor was operated continuously for 120 days at room temperature (26 ± 5ºC with hydraulic retention times of 50, 40 and 60 h. COD and BOD removals and biogas production were evaluated in order to analyze process efficiency. The average removal efficiencies for COD (77%, 72% and 80% and BOD5 (approximately 90% were obtained with HRTs of 50, 40 and 60 h, respectively. The average specific biogas production was 0.32 L/g COD (at standard temperature and pressure for the three experimental runs. These data indicate good reactor efficiency and suggest the possibility of using this system to treat wastewater generated by the household and personal products industry.

  19. Promoting the Growth of Chlorella vulgaris in Secondary Wastewater Treatment Effluent of Tofu Industry using Azospirillum sp

    OpenAIRE

    Wahyunanto Agung Nugroho; Musthofa Lutfi; Bambang Susilo

    2016-01-01

    The objective of this research is to investigate the influence of growth promoting bacteria (GPB) Azospirillum sp on the growth of microalgae Chlorella vulgaris in wastewater of tofu industry as a medium. To observe the influence, about 106 cells/mL of Chlorella vulgaris was cultivated in 1 L of wastewater of tofu industry. The wastewater was an effluent of an aerobic treatment. Six different treatments were set regarding to the Azospirillum sp added to the medium. The glass was marked as A0 ...

  20. Windows 8 visual quick tips

    CERN Document Server

    McFedries, Paul

    2012-01-01

    Easy-in, easy-out format covers all the bells and whistles of Windows 8 If you want to learn how to work smarter and faster in Microsoft's Windows 8 operating system, this easy-to-use, compact guide delivers the goods. Designed for visual learners, it features short explanations and full-color screen shots on almost every page, and it's packed with timesaving tips and helpful productivity tricks. From enhancing performance and managing digital content to setting up security and much more, this handy guide will help you get more out of Windows 8. Uses full-color screen shots and short, step-by-

  1. Transparent solar cell window module

    Energy Technology Data Exchange (ETDEWEB)

    Chau, Joseph Lik Hang; Chen, Ruei-Tang; Hwang, Gan-Lin; Tsai, Ping-Yuan [Nanopowder and Thin Film Technology Center, ITRI South, Industrial Technology Research Institute, Tainan County 709 (China); Lin, Chien-Chu [I-Lai Acrylic Corporation, Tainan City (China)

    2010-03-15

    A transparent solar cell window module based on the integration of traditional silicon solar cells and organic-inorganic nanocomposite material was designed and fabricated. The transparent solar cell window module was composed of a nanocomposite light-guide plate and traditional silicon solar cells. The preparation of the nanocomposite light-guide plate is easy without modification of the traditional casting process, the nanoparticles sol can be added directly to the polymethyl methacrylate (PMMA) monomer syrup during the process. The solar energy collected by this window can be used to power up small household electrical appliances. (author)

  2. Big Book of Windows Hacks

    CERN Document Server

    Gralla, Preston

    2008-01-01

    Bigger, better, and broader in scope, the Big Book of Windows Hacks gives you everything you need to get the most out of your Windows Vista or XP system, including its related applications and the hardware it runs on or connects to. Whether you want to tweak Vista's Aero interface, build customized sidebar gadgets and run them from a USB key, or hack the "unhackable" screensavers, you'll find quick and ingenious ways to bend these recalcitrant operating systems to your will. The Big Book of Windows Hacks focuses on Vista, the new bad boy on Microsoft's block, with hacks and workarounds that

  3. Windows Phone 7 Made Simple

    CERN Document Server

    Trautschold, Martin

    2011-01-01

    With Windows Phone 7, Microsoft has created a completely new smartphone operating system that focuses on allowing users to be productive with their smartphone in new ways, while offering seamless integration and use of Microsoft Office Mobile as well as other productivity apps available in the Microsoft App Store. Windows Phone 7 Made Simple offers a clear, visual, step-by-step approach to using your Windows Phone 7 smartphone, no matter what the manufacturer. Author Jon Westfall is an expert in mobile devices, recognized by Microsoft as a "Most Valuable Professional" with experience

  4. Holography through optically active windows

    Science.gov (United States)

    Decker, A. J.

    1979-01-01

    By using two orthogonally polarized reference beams, holograms can be recorded through stressed windows and the reconstructed virtual image will show no stress pattern. As shown analytically, the stress-pattern-free hologram is recordable for any polarization state of the object illumination. Hence, the more efficient nondepolarizing diffuser can be used in performing holography through stressed windows if two reference beams are used. Results are presented for a pair of machined polysulfone windows intended for use in a holographic flow-visualization setup in a single-stage-compressor test rig.

  5. Grab Windows training opportunities; check CERN Windows roadmap!

    CERN Multimedia

    IT Department

    2011-01-01

    CERN Operating Systems and Information Services group (IT-OIS) actively monitors market trends to check how new software products correspond to CERN needs. In the Windows world, Windows 7 has been a big hit, with over 1500 Windows 7 PCs within less than a year since its support was introduced at CERN. No wonder: Windows XP is nearly 10 years old and is steadily approaching the end of its life-cycle. At CERN, support for Windows XP will stop at the end of December 2012. Compared to Vista, Windows 7 has the same basic hardware requirements, but offers higher performance, so the decision to upgrade is rather straightforward. CERN support for Vista will end in June 2011. In the world of Microsoft Office, version 2007 offers better integration with the central services than the older version 2003. Progressive upgrade from 2003 to 2007 is planned to finish in September 2011, but users are encouraged to pro-actively upgrade at their convenience. Please note that Office 2007 brings an important change in the area of ...

  6. A state-of-the-art review on nitrous oxide control from waste treatment and industrial sources.

    Science.gov (United States)

    Frutos, Osvaldo D; Quijano, Guillermo; Aizpuru, Aitor; Muñoz, Raúl

    2018-03-20

    This review aims at holistically analyzing the environmental problems associated with nitrous oxide (N 2 O) emissions by evaluating the most important sources of N 2 O and its environmental impacts. Emissions from wastewater treatment processes and the industrial production of nitric and adipic acid represent nowadays the most important anthropogenic point sources of N 2 O. Therefore, state-of-the-art strategies to mitigate the generation and release to the atmosphere of this greenhouse and O 3 -depleting gas in the waste treatment and industrial sectors are also reviewed. An updated review of the end-of-the-pipe technologies for N 2 O abatement, both in the waste treatment and industrial sectors, is herein presented and critically discussed for the first time. Despite the consistent efforts recently conducted in the development of cost-efficient and eco-friendly N 2 O abatement technologies, physical/chemical technologies still constitute the most popular treatments for the control of industrial N 2 O emissions at commercial scale. The recent advances achieved on biological N 2 O abatement based on heterotrophic denitrification have opened new opportunities for the development of eco-friendly alternatives for the treatment of N 2 O emissions. Finally, the main limitations and challenges faced by these novel N 2 O abatement biotechnologies are identified in order to pave the way for market implementation. Copyright © 2018 Elsevier Inc. All rights reserved.

  7. Assessment of airborne nanoparticles present in industry of aluminum surface treatments.

    Science.gov (United States)

    Santos, R J; Vieira, M T

    2017-03-01

    Conventional industrial processes are emission sources of unintended nanoparticles which are potentially harmful for the environment and human health. The aim of this study is to assess airborne nanoparticle release from aluminum surface treatment processes in various workplaces. Two direct reading instruments, a scanning mobility particle sizer to measure size distribution and a nanoparticle surface area monitoring to measure the surface area of particles deposited in the human lung, were employed to perform area monitoring. The lacquering paint was the process which released the highest concentration of particles from 10-487 nm (7.06 × 10 6 particles/cm 3 ). The lacquering baths process emitted particles of the largest average size (76.9 nm) and the largest surface area deposited in the human lung (167.4 µm 2 /cm 3 ). Conversely, the anodizing bath process generated particles of the smallest average size (44.3 nm) and the lowest human lung-deposited surface area (1.2 µm 2 /cm 3 ). The total number of particles and the surface area can only be fairly correlated for environments in which the surface area presented higher values. The transmission electron microscopy analysis confirmed the presence of aluminum oxide particles of different dimensions near the LB and AB areas and polymeric-based particles near the LP areas. The findings of this study indicated that lacquering and anodizing surface treatments are indeed responsible for the emission of airborne nanoparticles. It also highlights the importance of control strategies as a means of protecting workers' health and environment.

  8. Input-dependent life-cycle inventory model of industrial wastewater-treatment processes in the chemical sector.

    Science.gov (United States)

    Köhler, Annette; Hellweg, Stefanie; Recan, Ercan; Hungerbühler, Konrad

    2007-08-01

    Industrial wastewater-treatment systems need to ensure a high level of protection for the environment as a whole. Life-cycle assessment (LCA) comprehensively evaluates the environmental impacts of complex treatment systems, taking into account impacts from auxiliaries and energy consumption as well as emissions. However, the application of LCA is limited by a scarcity of wastewater-specific life-cycle inventory (LCI) data. This study presents a modular gate-to-gate inventory model for industrial wastewater purification in the chemical and related sectors. It enables the calculation of inventory parameters as a function of the wastewater composition and the technologies applied. Forthis purpose, data on energy and auxiliaries' consumption, wastewater composition, and process parameters was collected from chemical industry. On this basis, causal relationships between wastewater input, emissions, and technical inputs were identified. These causal relationships were translated into a generic inventory model. Generic and site-specific data ranges for LCI parameters are provided for the following processes: mechanical-biological treatment, high-pressure wet-air oxidation, nanofiltration, and extraction. The input- and technology-dependent process inventories help to bridge data gaps where primary data are not available. Thus, they substantially help to perform an environmental assessment of industrial wastewater purification in the chemical and associated industries, which may be used, for instance, for technology choices.

  9. Infrared monitoring of gyrotron windows

    International Nuclear Information System (INIS)

    Huey, H.; Lopez, N.; Hu, G.; Choi, E.; Mundie, L.

    1983-01-01

    A technique for monitoring the gyrotron output window surface temperature with an infrared camera while the gyrotron is in operation has been developed. The IR camera views the window through a perforated waveguide wall, and serves both as a guide for the safe operation at high average power of the tube, as well as an aid in the analysis of new window designs. Window temperatures were studied as a function of a number of parameters, including gun anode voltage, beam current, magnetic field, coolant flow, and load matching. The IR technique is applicable to many types of high average power microwave and millimeter wave tubes. Successful operation of the Varian 60 GHz gyrotron to 214 kW CW was guided by the infrared camera. Analyses on 28, 56 and 60 GHz gyrotrons have led to a number of design changes. A comparison with computer calculations is also presented

  10. Bioaugmentation: An Emerging Strategy of Industrial Wastewater Treatment for Reuse and Discharge.

    Science.gov (United States)

    Nzila, Alexis; Razzak, Shaikh Abdur; Zhu, Jesse

    2016-08-25

    A promising long-term and sustainable solution to the growing scarcity of water worldwide is to recycle and reuse wastewater. In wastewater treatment plants, the biodegradation of contaminants or pollutants by harnessing microorganisms present in activated sludge is one of the most important strategies to remove organic contaminants from wastewater. However, this approach has limitations because many pollutants are not efficiently eliminated. To counterbalance the limitations, bioaugmentation has been developed and consists of adding specific and efficient pollutant-biodegrading microorganisms into a microbial community in an effort to enhance the ability of this microbial community to biodegrade contaminants. This approach has been tested for wastewater cleaning with encouraging results, but failure has also been reported, especially during scale-up. In this review, work on the bioaugmentation in the context of removal of important pollutants from industrial wastewater is summarized, with an emphasis on recalcitrant compounds, and strategies that can be used to improve the efficiency of bioaugmentation are also discussed. This review also initiates a discussion regarding new research areas, such as nanotechnology and quorum sensing, that should be investigated to improve the efficiency of wastewater bioaugmentation.

  11. Ecotoxicological evaluation of industrial port of Venice (Italy) sediment samples after a decontamination treatment

    International Nuclear Information System (INIS)

    Libralato, Giovanni; Losso, Chiara; Arizzi Novelli, Alessandra; Citron, Marta; Della Sala, Stefano; Zanotto, Emanuele; Cepak, Franka; Volpi Ghirardini, Annamaria

    2008-01-01

    This work assesses the ecotoxicological effects of polluted sediment after a decontamination treatment process using a new sediment washing technique. Sediment samples were collected from four sites in Marghera Port industrial channels (Venice, Italy). Ecotoxicological evaluations were performed with Vibrio fischeri and Crassostrea gigas bioassays. Whole sediment and elutriate were deemed as the most suitable environmental matrices for this study. Toxicity scores developed in the Lagoon of Venice for V. fischeri on whole sediment and for C. gigas on elutriate were considered for the final ranking of samples. Ecotoxicological results showed that the treated sediment samples presented both acute and sub-chronic toxicities, which were mainly attributed to the presence of some remaining chemicals such as metals and polyaromatic hydrocarbons. The acute toxicity ranged from low to medium, while the sub-chronic one from absent to very high, suggesting that treated sediments could not be reused in direct contact with seawater. - A sediment washing technique was assessed for port contaminated sediment remediation and reuse, indicating its reduced efficiency and the need for further improvements

  12. EVALUATION OF INDUSTRIAL DYEING WASTEWATER TREATMENT WITH COAGULANTS AND POLYELECTROLYTE AS A COAGULANT AID

    Directory of Open Access Journals (Sweden)

    G. R. Nabi Bidhendi;A. Torabian;H. Ehsani;N. Razmkhah

    2007-01-01

    Full Text Available Textile industry is the major source of water consumption and wastewater pollution. There are various treatment techniques to remove textile wastewater pollution. Coagulation-flocculation is a widely used process to remove pollution due to suspended particles. In this research, different coagulants like Alum, Lime, FeCl3, FeSO4 and MgCl2 were applied to select the suitable ones with optimum removal efficiency. Settling characteristics of flocs formed in the coagulation process were studied in a laboratory scale settling column unit. Parameters such as color, COD, TSS, turbidity and settled sludge volume have been evaluated. The optimum coagulant dose and pH value were determined by comparing the effectiveness of these coagulants. Results showed other coagulants except lime could eliminate color and COD successfully. In this case, FeSO4 was chosen as an optimum coagulant for color removal because of the lowest required coagulant dose, minimum settled sludge volume and maximum decolorization.

  13. Return sludge employed in enhancement of color removal in the integrally industrial wastewater treatment plant.

    Science.gov (United States)

    Liu, Shin-shou; Liang, Tsun-teng

    2004-01-01

    In this study, the recirculation of chemical sludge and integrated sludge were employed for enhancement of color removal in an integrally industrial wastewater treatment plant. The jar test was conducted for simulating chemical coagulation process with different coagulants, aluminum sulfate and polyaluminum chloride (PACl), after different activated sludge systems (with air or high-purity oxygen). The results showed that with sludge recirculation the process of coagulation for the color removal has up to 35% enhancement in comparison with no sludge recirculation. Meanwhile, the color removal enhancement of coagulant aluminum sulfate was approximately 2 to 3-times the color removal enhancement of coagulant PACl at the optimum ratio of return sludge. In coagulation process with influent color of 1220 true color unit (TCU), the optimum dosage of return sludge was 3010mg/L, when coagulant PACl or aluminum sulfate was employed. In coagulation process with influent color of 536 TCU, the optimum dosages of return sludge were 2340 and 4680mg/L using PACl and aluminum sulfate, respectively.

  14. Proposal for the award of an industrial support contract for cooling water treatment

    CERN Document Server

    1999-01-01

    This document concerns the award of an Industrial Support contract for cooling water treatment for LEP, PS and SPS. Following a market survey carried out among 46 firms in twelve Member States, a call for tenders (IT-2557/ST) was sent on 26 July 1999 to seven firms and two consortia in five Member States. By the closing date, CERN had received five tenders from firms and consortia in three Member States. The Finance Committee is invited to agree to the negotiation of a contract with the consortium AQUAZUR (FR) and SCHILLING CHEMIE (DE), the lowest bidder after realignment, for an initial period of three years, starting on 1 January 2000, for a total amount not exceeding 976 482 Swiss francs, not subject to revision until 31 December 2001. The contract will include options for two further one-year extensions beyond the initial three year period. The consortium has indicated the following distribution by country of the work covered by this adjudication proposal: FR - 52% and DE - 48%.

  15. Determination of transport parameters in polymeric systems for industrial wastewater treatments

    International Nuclear Information System (INIS)

    Caracciolo, Nestor; Vazquez, Cristina; Boeykens, Susana P.

    2009-01-01

    In this paper the influence of dispersed macromolecules in the process of selective mass transfer through aqueous systems was studied in order to apply this knowledge in the design of reactors for industrial wastewater treatments. The application of biomass, usually composed of biopolymers production accessible, is currently in great development. Particularly, their use in case of retention of heavy metals in liquids. The discovery of these retention phenomena provides the foundation of new technologies for remediation and the recovery of these metals. To evaluate the retention capacity or the mobility of charged species in TAD (stirred tank batch) and TUB (tubular) reactors, we studied the behavior of metal ions in media of different ionic strength with scleroglucan (polar polymer), xanthan (anionic polyelectrolyte) and polyoxyethylene (virtually non-polar). The study using anions and cations of varying mass and charge in the aforementioned systems, was done by Synchrotron Radiation micro X-Ray Fluorescence (SRμXRF). A double cell that allow determining concentrations at different times and positions was designed. (author)

  16. Bioaugmentation: An Emerging Strategy of Industrial Wastewater Treatment for Reuse and Discharge

    Directory of Open Access Journals (Sweden)

    Alexis Nzila

    2016-08-01

    Full Text Available A promising long-term and sustainable solution to the growing scarcity of water worldwide is to recycle and reuse wastewater. In wastewater treatment plants, the biodegradation of contaminants or pollutants by harnessing microorganisms present in activated sludge is one of the most important strategies to remove organic contaminants from wastewater. However, this approach has limitations because many pollutants are not efficiently eliminated. To counterbalance the limitations, bioaugmentation has been developed and consists of adding specific and efficient pollutant-biodegrading microorganisms into a microbial community in an effort to enhance the ability of this microbial community to biodegrade contaminants. This approach has been tested for wastewater cleaning with encouraging results, but failure has also been reported, especially during scale-up. In this review, work on the bioaugmentation in the context of removal of important pollutants from industrial wastewater is summarized, with an emphasis on recalcitrant compounds, and strategies that can be used to improve the efficiency of bioaugmentation are also discussed. This review also initiates a discussion regarding new research areas, such as nanotechnology and quorum sensing, that should be investigated to improve the efficiency of wastewater bioaugmentation.

  17. Monitoring and troubleshooting of non-filamentous settling and dewatering problems in an industrial activated sludge treatment plant

    DEFF Research Database (Denmark)

    Kjellerup, B. V.; Keiding, Kristian; Nielsen, Per Halkjær

    2001-01-01

    A large industrial activated sludge wastewater treatment plant had temporary problems with settling and dewatering of the sludge. Microscopical investigations revealed that the poor settling properties were not due to presence of filamentous bacteria, but poor floc properties. In order...... at this industrial plant. The described strategy can be useful in general to find and solve many solid/liquid separation problems in activated sludge wastewater treatment plants....... had started after summer closedown. Possible reasons for the changes in floc properties in the process tanks were found by a) analysing change in wastewater composition by evaluating the different production lines in the industrial plant, b) evaluating the operation of the plant, and c) performing...

  18. The application of advanced oxidation technologies to the treatment of effluents from the pulp and paper industry: a review.

    Science.gov (United States)

    Hermosilla, Daphne; Merayo, Noemí; Gascó, Antonio; Blanco, Ángeles

    2015-01-01

    The paper industry is adopting zero liquid effluent technologies to reduce freshwater use and meet environmental regulations, which implies closure of water circuits and the progressive accumulation of pollutants that must be removed before water reuse and final wastewater discharge. The traditional water treatment technologies that are used in paper mills (such as dissolved air flotation or biological treatment) are not able to remove recalcitrant contaminants. Therefore, advanced water treatment technologies, such as advanced oxidation processes (AOPs), are being included in industrial wastewater treatment chains aiming to either improve water biodegradability or its final quality. A comprehensive review of the current state of the art regarding the use of AOPs for the treatment of the organic load of effluents from the paper industry is herein addressed considering mature and emerging treatments for a sustainable water use in this sector. Wastewater composition, which is highly dependent on the raw materials being used in the mills, the selected AOP itself, and its combination with other technologies, will determine the viability of the treatment. In general, all AOPs have been reported to achieve good organic removal efficiencies (COD removal >40%, and about an extra 20% if AOPs are combined with biological stages). Particularly, ozonation has been the most extensively reported and successfully implemented AOP at an industrial scale for effluent treatment or reuse within pulp and paper mills, although Fenton processes (photo-Fenton particularly) have actually addressed better oxidative results (COD removal ≈ 65-75%) at a lab scale, but still need further development at a large scale.

  19. A window on urban sustainability

    International Nuclear Information System (INIS)

    Stigt, Rien van; Driessen, Peter P.J.; Spit, Tejo J.M.

    2013-01-01

    Sustainable urban development requires the integration of environmental interests in urban planning. Although various methods of environmental assessment have been developed, plan outcomes are often disappointing due to the complex nature of decision-making in urban planning, which takes place in multiple arenas within multiple policy networks involving diverse stakeholders. We argue that the concept of ‘decision windows’ can structure this seemingly chaotic chain of interrelated decisions. First, explicitly considering the dynamics of the decision-making process, we further conceptualized decision windows as moments in an intricate web of substantively connected deliberative processes where issues are reframed within a decision-making arena, and interests may be linked within and across arenas. Adopting this perspective in two case studies, we then explored how decision windows arise, which factors determine their effectiveness and how their occurrence can be influenced so as to arrive at more sustainable solutions. We conclude that the integration of environmental interests in urban planning is highly dependent on the ability of the professionals involved to recognize and manipulate decision windows. Finally, we explore how decision windows may be opened. -- Highlights: • Decision-making about sustainable urban development occurs in networks. • The concept of ‘decision windows’ was further elaborated. • Decision windows help understand how environmental interests enter decision-making. • Decision windows can, to some extent, be influenced

  20. Mastering Microsoft Windows Server 2008 R2

    CERN Document Server

    Minasi, Mark; Finn, Aidan

    2010-01-01

    The one book you absolutely need to get up and running with Windows Server 2008 R2. One of the world's leading Windows authorities and top-selling author Mark Minasi explores every nook and cranny of the latest version of Microsoft's flagship network operating system, Windows Server 2008 R2, giving you the most in-depth coverage in any book on the market.: Focuses on Windows Windows Server 2008 R2, the newest version of Microsoft's Windows' server line of operating system, and the ideal server for new Windows 7 clients; Author Mark Minasi is one of the world's leading Windows authorities and h

  1. T25 ITER ECH window development 110 GHz ECH distributed window development. Final report, May 1, 1994 - December 31, 1995

    International Nuclear Information System (INIS)

    Olstad, R.A.; Moeller, C.P.; Grunloh, H.J.

    1998-01-01

    Electron Cyclotron Heating (ECH) is one of the major candidates for Heating and Current Drive on ITER. ECH is extremely attractive from a reactor engineering point of view, offering compact launch structures, high injected power density, and a simple interface with the shield/blanket. Economic deployment of ECH for ITER requires MW unit microwave sources (gyrotrons). The present technology limitation is the availability of suitable low loss output windows. These are needed for the torus as well as the tube. The torus window, in particular, is a demanding application as it also serves as a tritium barrier. Several distinct window concepts are under development by the various Parties. This report summarizes the efforts to make and test a open-quotes distributedclose quotes window suitable for 1 MW cw operation at 110 GHz. A companion report (Final Report on Task 245+) describes the efforts to make a distributed window suitable for 1 MW cw operation at 170 GHz, the main frequency of interest to ITER. General Atomics (GA) fabricated a 4 in. x 4 in. 110 GHz distributed window which was delivered in September 1995 to Communications and Power Industries (CPI). Hot tests at CPI confirmed the power handling capability of the window. Tests were conducted with a reduced beam size at 200 kW with 0.7 s pulses without any arcing or excessive window temperatures. The power density and pulse length were equivalent to that in a full size 1.2 MW CW beam with a peak-to-average power ratio of 2.7. This window was assembled using a gold braze material to bond the sapphire strips to the niobium frame. The braze was successful except for small leaks at two locations, and re-braze efforts were unsuccessful

  2. Synthesis of BiOCl using Cl source from industrial wastewater and its application for wastewater treatment.

    Science.gov (United States)

    Yao, Kun; Jia, Manke; Wu, Huanhuan; Li, Yonggang; Chen, Chuncheng; Huang, Yingping

    2017-11-03

    Cl - in industrial wastewater from glyphosate production has been used as Cl source to synthesize BiOCl photocatalyst via a simple solvothermal route. The crystalline, morphology, specific surface area and optical properties of photocatalysts prepared under various conditions have been investigated. BiOCl photocatalyst prepared in acidic solution shows the highest crystallinity and without impurities and microcellular structure. The degradation of industrial wastewater contaminants demonstrates the possibility of this BiOCl used in industrial wastewater treatment and phosphorus recycling through the subsequent phosphorus recovery processes. This study not only sheds light on the possibility of photocatalysts' preparation in situ using industrial wasterwater as raw materials and the feasibility of using photocatalysis technology in wastewater treatment area, but also the chloride ions have been removed as an available resource and the corrosion to treatment facilities has been slowed down. The phosphorus and nitrogen resources can be recycled by other subsequent recycle recoveries. It offers a novel way for the wastewater treatment process in succession from photocatalysts' manufacture to contaminants disposal.

  3. Fungal treatment of humic-rich industrial wastewater : application of white rot fungi in remediation of food-processing wastewater

    NARCIS (Netherlands)

    Zahmatkesh, M.; Spanjers, H.L.F.M.; van Lier, J.B.

    2017-01-01

    This paper presents the results of fungal treatment of a real industrial wastewater (WW), providing insight into the main mechanisms involved and clarifying some ambiguities and uncertainties in the previous reports. In this regard, the mycoremediation potentials of four strains of white rot

  4. An innovative transparent cranial window based on skull optical clearing An innovative transparent cranial window

    Science.gov (United States)

    Wang, J.; Zhang, Y.; Xu, T. H.; Luo, Q. M.; Zhu, D.

    2012-06-01

    Noninvasive optical methods for viewing the structural and functional organization of cortex have been playing important roles in brain research, which usually suffer from turbid skull. Various cranial window models based on surgical operation have been proposed, but have respective limitations. Here, an innovative transparent cranial window of mouse was established by topically treatment with a skull optical clearing solution (SOCS), rather than by craniotomy. Based on the experiment of optical clearing efficacy of skull in vitro, we found that the turbid skull became transparent within 25 min after application of SOCS. The USAF target is visible through the treated skull, and the calculated resolution can achieve 8.4 μm. After the in vivo skull was topically treated with SOCS, the cortical micro-vessels can be visible clearly. The quantitative analysis indicated that the minimum resolution diameter of micro-vessels in 14.4±0.8 μm through the transparent cranial window closed to that in 12.8±0.9 μm of the exposed cortical micro-vessels. Further, preliminary results from Laser Speckle Imaging demonstrated that there was no influence on cortical blood flow distribution of mouse after topically treatment with SOCS on skull. This transparent cranial window will provide a convenient model for cortex imaging in vivo, which is very significant for neuroscience research.

  5. Strengthening functions of NC. Windows terminal functions; NC no kino kyoka. Windows tanmatsu kino

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    A network computer (NC) was connected to a Citrix Meta Frame server to strengthen its functions so that such Windows applications as Excel and Word can be utilized. Combination of Meta Frame with the NC made it possible to structure such unique system that the Windows applications can be used, the environment can be unified easily with that of all clients, and no installation is required for applications at the clients. Thus, the scope of NC application has been expanded. Major usage includes the followings: (1) industrial area: a site controller can utilize work report (Excel) and mails by using an NC terminal available at factory production sites; (2) public area: a large number of learning persons can utilize Excel and Word at educational institutions; and (3) general area: ordinary offices can utilize applications developed by Visual Basic and others in addition to Excel and Work. (translated by NEDO)

  6. Novel industrial wastewater treatment integrated with recovery of water and salt under a zero liquid discharge concept.

    Science.gov (United States)

    Rajamani, Sengodagounder

    2016-03-01

    Conventional industrial effluent treatment systems are designed to reduce biochemical oxygen demand (BOD), chemical oxygen demand (COD) but not total dissolved solids (TDS), mainly contributed by chlorides. In addition to the removal of TDS, it is necessary to recover water for reuse to meet the challenges of shortage of quality water. To recover water, the wastewater needs to be further treated by adopting treatment systems including microfilters, low pressure membrane units such as ultrafiltration (UF), membrane bioreactors (MBR), etc., for the application of reverse osmosis (RO) systems. By adopting the RO system, 75%-80% of quality water with industrial waste for reuse has become a reality. The membrane system has been used for different applications. It has become mandatory to achieve zero liquid discharge (ZLD) in many states in India and other countries such as Spain, China, etc., and resulted in development of new treatment technologies to suit the local conditions.

  7. Microbiological and physicochemical treatments applied to metallurgic industry aiming water reuse

    Directory of Open Access Journals (Sweden)

    Antonio Roberto Crystal Bello

    2008-04-01

    Full Text Available A study was conducted on the reuse of the water in a system composed of a sewage treatment plant (STP using prolonged aeration with activated sludge and a compact water treatment plant (CWTP in a metallurgic industry. The processes for obtaining the water for reuse were microbiological and physicochemical. The domestic sewage was then pumped to the STP, where biological flocks were formed and clarified water was obtained. The efficiency of the microbiological process in the STP was evaluated for removal of biochemical oxygen demand (BOD, chemical oxygen demand (COD and sedimentary solids (SS. The efficiency of physicochemical processes for clarifying the water and disinfection was evaluated through analysis of pH, turbidity, color, aerobic heterotrophic bacterial count, free chlorine, hardness, alkalinity, chlorides, sulfates and dissolved total solids (DTS. In the reuse of the water, acute toxicity for the microcrustaceans Daphnia similis was also evaluated.Estudou-se o reuso de água de um sistema composto por estação de tratamento de esgoto (ETE com aeração prolongada e lodo ativado, e em uma estação compacta de tratamento de água (ECTA de uma indústria metalúrgica. Os processos para obtenção da água de reuso foram: microbiológico e físico-químico. O esgoto doméstico foi bombeado para a ETE, onde houve formação de flocos biológicos e água clarificada. Avaliou-se a eficiência do processo microbiológico da ETE mediante a remoção de demanda bioquímica de oxigênio (DBO, demanda química de oxigênio (DQO e sólidos sedimentáveis (SS. A eficiência do processo físico-químico de clarificação e desinfecção foi avaliada mediante análises de pH, turbidez, cor, contagem de bactérias heterotróficas aeróbias, cloro livre, dureza, alcalinidade, cloretos, sulfatos, sólidos totais dissolvidos (STD. Na água de reuso além desses parâmetros avaliou-se a toxicidade aguda ao microcrustáceo Daphnia similis.

  8. RapidArc, SmartArc and TomoHD compared with classical step and shoot and sliding window intensity modulated radiotherapy in an oropharyngeal cancer treatment plan comparison

    International Nuclear Information System (INIS)

    Van Gestel, Dirk; Nuyts, Sandra; Van den Weyngaert, Danielle; Van den Wyngaert, Tim; Vermorken, Jan B; Gregoire, Vincent; Vliet-Vroegindeweij, Corine van; Van den Heuvel, Frank; Crijns, Wouter; Coelmont, Ann; De Ost, Bie; Holt, Andrea; Lamers, Emmy; Geussens, Yasmyne

    2013-01-01

    Radiotherapy techniques have evolved rapidly over the last decade with the introduction of Intensity Modulated RadioTherapy (IMRT) in different forms. It is not clear which of the IMRT techniques is superior in the treatment of head and neck cancer patients in terms of coverage of the planning target volumes (PTVs), sparing the organs at risk (OARs), dose to the normal tissue, number of monitor units needed and delivery time. The present paper aims to compare Step and Shoot (SS) IMRT, Sliding Window (SW) IMRT, RapidArc (RA) planned with Eclipse, Elekta VMAT planned with SmartArc (SA) and helical TomoHD TM (HT). Target volumes and organs at risk (OARs) of five patients with oropharyngeal cancer were delineated on contrast enhanced CT-scans, then treatment plans were generated on five different IMRT systems. In 32 fractions, 69.12 Gy and 56 Gy were planned to the therapeutic and prophylactic PTVs, respectively. For the PTVs and 26 OARs ICRU 83 reporting guidelines were followed. Differences in the studied parameters between treatment planning systems were analysed using repeated measures ANOVA. Mean Homogeneity Index of PTV therapeutic is better with HT(.06) followed by SA(.08), RA(.10), SW(.10) and SS(.11). PTV prophylactic is most homogeneous with RA. Parotid glands prescribed mean doses are only obtained by SA and HT, 20.6 Gy and 21.7 Gy for the contralateral and 25.6 Gy and 24.1 Gy for the ipsilateral, against 25.6 Gy and 32.0 Gy for RA, 26.4 Gy and 34.6 Gy for SW, and 28.2 Gy and 34.0 Gy for SS. RA uses the least monitor units, HT the most. Treatment times are 3.05 min for RA, and 5.9 min for SA and HT. In the treatment of oropharyngeal cancer, we consider rotational IMRT techniques preferable to fixed gantry techniques due to faster fraction delivery and better sparing of OARs without a higher integral dose. TomoHD gives most homogeneous target coverage with more sparing of spinal cord, brainstem, parotids and the lower swallowing apparatus than most of the

  9. Characteristics and Biodegradability of Wastewater Organic Matter in Municipal Wastewater Treatment Plants Collecting Domestic Wastewater and Industrial Discharge

    Directory of Open Access Journals (Sweden)

    Yun-Young Choi

    2017-06-01

    Full Text Available Municipal wastewater treatment plants (WWTPs in Korea collect and treat not only domestic wastewater, but also discharge from industrial complexes. However, some industrial discharges contain a large amount of non-biodegradable organic matter, which cannot be treated properly in a conventional biological WWTP. This study aimed to investigate the characteristics and biodegradability of the wastewater organic matter contained in the industrial discharges and to examine the fate of the industrial discharges in a biological WWTP. In contrast to most previous studies targeting a specific group of organic compounds or traditional water quality indices, such as biological oxygen demand (BOD and chemical oxygen demand (COD, this study was purposed to quantify and characterize the biodegradable and nonbiodegradable fractions of the wastewater organic matter. Chemical oxygen demand (COD fractionation tests and fluorescence spectroscopy revealed that the industrial discharge from dyeing or pulp mill factories contained more non-biodegradable soluble organic matter than did the domestic wastewater. Statistical analysis on the WWTPs’ monitoring data indicated that the industrial discharge containing non-biodegradable soluble organic matter was not treated effectively in a biological WWTP, but was escaping from the system. Thus, industrial discharge that contained non-biodegradable soluble organic matter was a major factor in the decrease in biodegradability of the discharge, affecting the ultimate fate of wastewater organic matter in a biological WWTP. Further application of COD fractionation and fluorescence spectroscopy to wastewaters, with various industrial discharges, will help scientists and engineers to better design and operate a biological WWTP, by understanding the fate of wastewater organic matter.

  10. Switchable Materials for Smart Windows.

    Science.gov (United States)

    Wang, Yang; Runnerstrom, Evan L; Milliron, Delia J

    2016-06-07

    This article reviews the basic principles of and recent developments in electrochromic, photochromic, and thermochromic materials for applications in smart windows. Compared with current static windows, smart windows can dynamically modulate the transmittance of solar irradiation based on weather conditions and personal preferences, thus simultaneously improving building energy efficiency and indoor human comfort. Although some smart windows are commercially available, their widespread implementation has not yet been realized. Recent advances in nanostructured materials provide new opportunities for next-generation smart window technology owing to their unique structure-property relations. Nanomaterials can provide enhanced coloration efficiency, faster switching kinetics, and longer lifetime. In addition, their compatibility with solution processing enables low-cost and high-throughput fabrication. This review also discusses the importance of dual-band modulation of visible and near-infrared (NIR) light, as nearly 50% of solar energy lies in the NIR region. Some latest results show that solution-processable nanostructured systems can selectively modulate the NIR light without affecting the visible transmittance, thus reducing energy consumption by air conditioning, heating, and artificial lighting.

  11. National economic models of industrial water use and waste treatment. [technology transfer

    Science.gov (United States)

    Thompson, R. G.; Calloway, J. A.

    1974-01-01

    The effects of air emission and solid waste restrictions on production costs and resource use by industry is investigated. A linear program is developed to analyze how resource use, production cost, and waste discharges in different types of production may be affected by resource limiting policies of the government. The method is applied to modeling ethylene and ammonia plants at the design stage. Results show that the effects of increasingly restrictive wastewater effluent standards on increased energy use were small in both plants. Plant models were developed for other industries and the program estimated effects of wastewater discharge policies on production costs of industry.

  12. Evaluation of the chelating performance of biopolyelectrolyte green complexes (NIBPEGCs) for wastewater treatment from the metal finishing industry.

    Science.gov (United States)

    López-Maldonado, Eduardo A; Zavala García, Oscar Gabriel; Escobedo, Kevin Cruz; Oropeza-Guzman, Mercedes T

    2017-08-05

    In this paper nonstoichiometric interbiopolyelectrolyte green complexes (NIBPEGCs) were prepared using chitosan (Ch), alginate (AG) and poly(acrylic acid)(PAA). They are proposed as innovative formulations (polyelectrolytes and chelating agents) suitable for the elimination heavy metals contained in wastewater. This application may represent an integral solution for industries rejecting solid and aqueous metallic materials; however, it has not been previously reported. NIBPEGCs physicochemical performance was evaluated based on pH, particle size, surface charge, isoelectric point, dose, coagulation-flocculation kinetics and chemical affinity with seven metal ions. The experimental results showed that NIBPEGCs composed by AG/Ch and PAA/Chitosan have all the three complementary functions: chemical affinity, electrostatic interaction and particle entrapment anticipating more simple operation units to remove heavy metals. Complexes of AG/Ch (negative) were higher performance in removing heavy metals, with a dose window (150-180mg/L), lower dose of 410mg/L PAA/Ch (negative). Investigation of chelating performances of NIBPEGCs show that the efficiency of metal removal is: Ca˃Cr˃Cu˃Pb˃Ni˃Zn˃Cd. Transmittance vs time profiles, metals and zeta potential analysis showed that chelation capacity is the crucial factor to ensure metallic species removal, followed by physical entrapment of the metallic colloids. Integrating all presented results allow to sustain the development of excellent metals removal formulations. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. 16 CFR 455.3 - Window form.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Window form. 455.3 Section 455.3 Commercial... Window form. (a) Form given to buyer. Give the buyer of a used vehicle sold by you the window form...) Incorporated into contract. The information on the final version of the window form is incorporated into the...

  14. Music@Microsoft.Windows: Composing Ambience

    Science.gov (United States)

    Rickert, Thomas

    2010-01-01

    It is well known, of course, that all Windows versions except for 3.1 have a brief (four to six second) piece of music indicating that Windows is booted and ready for use. While the music may indicate Windows has booted, it bears no immediately discernable relation to the various uses we might actually put Windows to--working, gaming,…

  15. Windows Server 2012 R2 administrator cookbook

    CERN Document Server

    Krause, Jordan

    2015-01-01

    This book is intended for system administrators and IT professionals with experience in Windows Server 2008 or Windows Server 2012 environments who are looking to acquire the skills and knowledge necessary to manage and maintain the core infrastructure required for a Windows Server 2012 and Windows Server 2012 R2 environment.

  16. Travailler avec Windows 7 au CERN (FR)

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). La mise à disposition de Windows 7 au CERN et son intégration dans l’infrastructure de Windows au CERN seront présentées.

  17. 75 FR 35493 - Guidance for Industry on Systemic Lupus Erythematosus-Developing Medical Products for Treatment...

    Science.gov (United States)

    2010-06-22

    ... ``Lupus Nephritis Caused by Systemic Lupus Erythematosus--Developing Medical Products for Treatment... entitled ``Systemic Lupus Erythematosus--Developing Medical Products for Treatment.'' This guidance... medical devices for the treatment of systemic lupus erythematosus (SLE). This guidance finalizes the draft...

  18. Oscillatory integration windows in neurons

    Science.gov (United States)

    Gupta, Nitin; Singh, Swikriti Saran; Stopfer, Mark

    2016-01-01

    Oscillatory synchrony among neurons occurs in many species and brain areas, and has been proposed to help neural circuits process information. One hypothesis states that oscillatory input creates cyclic integration windows: specific times in each oscillatory cycle when postsynaptic neurons become especially responsive to inputs. With paired local field potential (LFP) and intracellular recordings and controlled stimulus manipulations we directly test this idea in the locust olfactory system. We find that inputs arriving in Kenyon cells (KCs) sum most effectively in a preferred window of the oscillation cycle. With a computational model, we show that the non-uniform structure of noise in the membrane potential helps mediate this process. Further experiments performed in vivo demonstrate that integration windows can form in the absence of inhibition and at a broad range of oscillation frequencies. Our results reveal how a fundamental coincidence-detection mechanism in a neural circuit functions to decode temporally organized spiking. PMID:27976720

  19. Teach yourself visually Windows 8

    CERN Document Server

    McFedries, Paul

    2012-01-01

    A practical guide for visual learners eager to get started with Windows 8 If you learn more quickly when you can see how things are done, this Visual guide is the easiest way to get up and running on Windows 8. It covers more than 150 essential Windows tasks, using full-color screen shots and step-by-step instructions to show you just what to do. Learn your way around the interface and how to install programs, set up user accounts, play music and other media files, download photos from your digital camera, go online, set up and secure an e-mail account, and much more. The tried-and-true format

  20. Windows Server 2012 : Uudet ominaisuudet ja muutokset

    OpenAIRE

    Oksanen, Joni

    2013-01-01

    Tämän opintyön tarkoituksena on valottaa Windows Server 2012 -käyttöjärjestelmän muutoksia verrattuna vanhaan Windows Server 2008 R2 -versioon. Työ aloitettiin ennen Windows Server 2012 -julkaisua Release Candidate -version testauksella ja myöhemmin julkaisun jälkeen Windows Serverin kokeiluversiolla. Työssä on silti ajankohtaista tietoa Windows Server 2012:sta. Aluksi käsitellään Windows Servereiden kehityskaarta lyhyesti ja käsitellään uusinta Windows Serveriä tuotteena se...

  1. Technical improvements in 19th century Belgian window glass production

    Science.gov (United States)

    Lauriks, Leen; Collette, Quentin; Wouters, Ine; Belis, Jan

    Glass was used since the Roman age in the building envelope, but it became widely applied together with iron since the 19th century. Belgium was a major producer of window glass during the nineteenth century and the majority of the produced window glass was exported all over the world. Investigating the literature on the development of 19th century Belgian window glass production is therefore internationally relevant. In the 17th century, wood was replaced as a fuel by coal. In the 19th century, the regenerative tank furnace applied gas as a fuel in a continuous glass production process. The advantages were a clean production, a more constant and higher temperature in the furnace and a fuel saving. The French chemist Nicolas Leblanc (1787-1793) and later the Belgian chemist Ernest Solvay (1863) invented processes to produce alkali out of common salt. The artificial soda ash improved the quality and aesthetics of the glass plates. During the 19th century, the glass production was industrialized, influencing the operation of furnaces, the improvement of raw materials as well as the applied energy sources. Although the production process was industrialized, glassblowing was still the work of an individual. By improving his work tools, he was able to create larger glass plates. The developments in the annealing process followed this evolution. The industry had to wait until the invention of the drawn glass in the beginning of the 20th century to fully industrialise the window glass manufacture process.

  2. Sustainable agro-food industrial wastewater treatment using high rate anaerobic process

    OpenAIRE

    Rajagopal, Rajinikanth; Saady, Noori M. Cata; Torrijos, Michel; Thanikal, Joseph V.; Hung, Yung-Tse

    2013-01-01

    This review article compiles the various advances made since 2008 in sustainable high-rate anaerobic technologies with emphasis on their performance enhancement when treating agro-food industrial wastewater. The review explores the generation and characteristics of different agro-food industrial wastewaters; the need for and the performance of high rate anaerobic reactors, such as an upflow anaerobic fixed bed reactor, an upflow anaerobic sludge blanket (UASB) reactor, hybrid systems etc.; op...

  3. A Study on the Waste Water Treatment Technology for Steel Industry: Recycle And Reuse.

    OpenAIRE

    Sanjeev Kumar Sinha; Vikas Kumar Sinha; Samir Kr. Pandey; Anup Tiwari

    2016-01-01

    The steel industry is one of the most important and vital Industry of the present and the future. It is the asset of a nation. Steel plants use a tremendous amount of water for waste transfer, cooling and dust control. The steel plants have sintering mills, coke plants, blast furnaces, chemical byproducts and chemical processes, water cooled rolls, pumps, extrusion experiment, transfer lines for sludges and slurries. All these plants use a tremendous amount of water to cool the pr...

  4. Application of the natural cellulosic supports modified chemically for the treatment of the industrial effluents

    International Nuclear Information System (INIS)

    Kassale, A.; Elbariji, S.; Lacherai, A.; Elamine, M.; Kabli, H.; Albourine, A.

    2009-01-01

    The process of purification and discoloration of industrial waters (and particularly effluents of the textile industry) can meet major difficulties: certain dyes agents get through the devices of purge without being to stop. the cost of equipment and products of purification is prohibitive. Finally, in many cases, the discoloration can be only partial because waters to be treated containing mixtures of dyes of different nature, the material of purification can be effective only screw/screw of some of them. (Author)

  5. Increased incidence of infertility treatment among women working in the plastics industry

    DEFF Research Database (Denmark)

    Hougaard, K.S.; Hannerz, H.; Feveile, H.

    2009-01-01

    Several plastic chemicals adversely affect reproductive ability. This study examined the possible association between employment in the plastics industry and infertility. Dynamic cohorts of economically active women and men were followed for hospital contacts due to infertility in the Danish...... in female plastics workers motivates more specific studies of reproductive occupational health in the plastics industry. (C) 2009 Elsevier Inc. All rights reserved Udgivelsesdato: 2009/4...

  6. Windows 7 is supported at CERN

    CERN Multimedia

    IT Department

    2010-01-01

    The new version of the Windows operating system - Windows 7 - is now officially supported at CERN. Windows 7 32-bit is now the default operating system for the new computers at CERN. What’s new in Windows 7 Users of Windows XP will find many new features and options. Users of Windows Vista will feel very familiar with one major difference: higher performance and better responsiveness of the operating system. Other enhancements include: refined Aero desktop that makes it easier to navigate between your different application windows; new snapping windows that allows user to resize a window simply by dragging it to the edge of the screen and “pin” that allows grouping and arranging often accessed applications on the taskbar. Windows 7 introduces the new concept of libraries – containers for user files that have links to different local or network folders. By default, users can see four libraries: Documents, Music, Pictures and Videos. These libraries point to the cor...

  7. *New* CRITICAL Windows Security patch

    CERN Multimedia

    2003-01-01

    On 10 September 2003, Microsoft issued a new CRITICAL security patch, MS03-039. It must be URGENTLY applied on ALL WINDOWS systems, which are not centrally managed for security patches. This includes Experiment computers, Home computers and Windows Portable and Desktop systems not running NICE. Details of the security hole and patch for MS03-039 (which also includes MS03-026) are at: http://cern.ch/it-div/news/hotfix-MS03-039.asp http://www.microsoft.com/technet/security/bulletin/MS03-039.asp

  8. *New*: CRITICAL Windows Security patch

    CERN Multimedia

    2003-01-01

    On 10 September 2003, Microsoft issued a new CRITICAL security patch, MS03-039. It must be URGENTLY applied on ALL WINDOWS systems, which are not centrally managed for security patches. This includes Experiment computers, Home computers and Windows Portable and Desktop systems not running NICE. Details of the security hole and patch for MS03-039 (which also includes MS03-026) are at: http://cern.ch/it-div/news/hotfix-MS03-039.asp http://www.microsoft.com/technet/security/bulletin/MS03-039.asp

  9. Advanced Control of Electrochromic Windows

    OpenAIRE

    Scartezzini, Jean-Louis; Zarkadis, Nikos; Morel, Nicolas

    2013-01-01

    In our research we use the technology of electrochromic (EC) glazing to maximize the use of daylight and minimize the energy consumption in buildings while preserving visual and thermal comfort of the users. We propose an advanced automatic control of EC windows coupled with an anidolic daylighting system (ADS), blinds and dimmable fluorescent lights. EC windows with a visible transmittance range (Tv) of 0.15 – 0.50 were installed on the southern façade of an office room of the LESO experimen...

  10. What's New in Windows Vista?

    CERN Document Server

    Culp, Brian

    2006-01-01

    Get ready for a quick blast through this significant change to Windows! This guide will give you a quick look at many of the most significant new features in Vista, Microsoft's first revision of Windows in nearly six years. Starting with the changes to the interface, introducing Aero, and showing you some visuals, we then move on to the completely revamped search options. The new task scheduler and printing gadgets, are next with some cool new changes. Probably the most significant changes, however, come in the area of security and this guide takes a look at them from user priveleges, to

  11. Windows Vista Administrator's Pocket Guide

    CERN Document Server

    Stanek, William R

    2007-01-01

    Portable and precise, this pocket-sized guide delivers immediate answers for the day-to-day administration of Windows Vista. Zero in on core support and maintenance tasks using quick-reference tables, instructions, and lists. You'll get the precise information you need to solve problems and get the job done-whether you're at your desk or in the field! Get fast facts to: Install and configure Windows Vista-and optimize the user workspaceMaintain operating system components, hardware devices, and driversCreate user and group accounts-and control rights and permissionsAdminister group policy se

  12. SNS Proton Beam Window Disposal

    Directory of Open Access Journals (Sweden)

    Popova Irina

    2017-01-01

    Full Text Available In order to support the disposal of the proton beam window assembly of the Spallation Neutron Source beamline to the target station, waste classification analyses are performed. The window has a limited life-time due to radiation-induced material damage. Analyses include calculation of the radionuclide inventory and shielding analyses for the transport package/container to ensure that the container is compliant with the transportation and waste management regulations. In order to automate this procedure and minimize manual work a script in Perl language was written.

  13. Microsoft Windows Server Administration Essentials

    CERN Document Server

    Carpenter, Tom

    2011-01-01

    The core concepts and technologies you need to administer a Windows Server OS Administering a Windows operating system (OS) can be a difficult topic to grasp, particularly if you are new to the field of IT. This full-color resource serves as an approachable introduction to understanding how to install a server, the various roles of a server, and how server performance and maintenance impacts a network. With a special focus placed on the new Microsoft Technology Associate (MTA) certificate, the straightforward, easy-to-understand tone is ideal for anyone new to computer administration looking t

  14. Window of opportunity

    International Nuclear Information System (INIS)

    Ashdown, Martin; Coventry, Brendon

    2014-01-01

    By targeting cancer treatments to specific phases of the immune cycle, researchers believe they can dramatically improve the chances of complete remission. It is just over 100 years since Charles Mayo, of Mayo Clinic fame, was exchanging letters with William Coley, a New York surgeon who was using "bacterial toxin" vaccines to successfully treat patients with advanced cancer - even causing complete remission of all cancer in 5-10% of patients. These historical letters from the 1890s are truly instructive. Fast-forward to 2014 and we find that cancer immunotherapy is again topical as a result of occasional prom-ising new responses. But how do we make cancer immunotherapy work for all patients? Are we truly on the precipice of major advancement? A cancer drug that has been used for more than 20 years and can cure advanced cancer patients is providing new information about how to achieve complete remission from cancer. This drug, interleukin-2, is providing something analogous to how the "Rosetta Stone" unlocked historical script.

  15. Forensic Analysis of Windows Registry Against Intrusion

    OpenAIRE

    Haoyang Xie; Keyu Jiang; Xiaohong Yuan

    2012-01-01

    Windows Registry forensics is an important branch of computer and network forensics. Windows Registry is often considered as the heart of Windows Operating Systems because it contains allof the configuration setting of specific users, groups, hardware, software, and networks. Therefore, Windows Registry can be viewed as a gold mine of forensic evidences which could be used in courts. This paper introduces the basics of Windows Registry, describes its structure and its keys and subkeys thathav...

  16. Treatment and disposal of naturally occurring radioactive material (NORM) in the oil and gas industry. A review

    International Nuclear Information System (INIS)

    Richter, Ruediger B.; Schmuelling, Marcus; Hosemann, Peter

    2014-01-01

    Concerning naturally occurring radioactive material (NORM) from the oil/ and gas industry most of the industrial countries were lacking clear regulatory frameworks in waste legislation for many years. In the meanwhile on several places in Europe, but also in some of the GCC states in the Middle East such as in the United Arab Emirates and in Oman specialized treatment facilities are either in the stage of construction or already in operation. In particular, pilot plants for the decontamination of NORM-contaminated equipment have been tested recently. The paper reflects on the generation and the technical characterization of NORM but also the legislation compared on international level. Particularly an overview was provided by comparing the common practice on disposal in the North American Countries in comparison to Germany, the UK but also Australia. In addition the successful treatment of produced water from crude oil separation in a ''Constructed Wetland'' in the Sultanate Oman is briefly highlighted.

  17. Treatment of food-agro (sugar industry wastewater with copper metal and salt: Chemical oxidation and electro-oxidation combined study in batch mode

    Directory of Open Access Journals (Sweden)

    Anurag Tiwari

    2017-06-01

    Full Text Available Sugar industry is one of the major industries which have been included in the polluting industries list by the World Bank. Different pollution monitoring agencies like State and National Pollution Control Boards have been made compulsory for each industry to set up a waste water treatment plants. In treatment system, single treatments of effluent are not effective to manage the dischargeable limit. So an attempted has been made to treat sugar industry wastewater with electrochemical and chemical process by using copper as electrode and chemical. Electrochemical process shows 81% chemical oxygen demand and 83.5% color reduction at pH 6, electrode distance 20 mm, current density 178 A m−2 and 120 min treatment time. The combined treatment results show 98% chemical oxygen demand and 99.5% color removal at 8 mM mass loading and pH 6 with copper sulphate.

  18. Exceptional and Spinorial Conformal Windows

    DEFF Research Database (Denmark)

    Mojaza, Matin; Pica, Claudio; Ryttov, Thomas

    2012-01-01

    We study the conformal window of gauge theories containing fermionic matter fields, where the gauge group is any of the exceptional groups with the fermions transforming according to the fundamental and adjoint representations and the orthogonal groups where the fermions transform according...

  19. CVD diamond windows for infrared synchrotron applications

    International Nuclear Information System (INIS)

    Sussmann, R.S.; Pickles, C.S.J.; Brandon, J.R.; Wort, C.J.H.; Coe, S.E.; Wasenczuk, A.; Dodge, C.N.; Beale, A.C.; Krehan, A.J.; Dore, P.; Nucara, A.; Calvani, P.

    1998-01-01

    This paper describes the attributes that make diamond a unique material for infrared synchrotron beam experiments. New developments in diamond synthesised by Chemical Vapour Deposition (CVD) promise to extend the range of applications which have been hitherto limited by the availability and cost of large-size single-crystal diamond. Polycrystalline CVD diamond components such as large (100 mm) diameter windows with extremely good transparency over a wide spectral range are now commercially available. Properties of CVD diamond of relevance to optical applications, such as mechanical strength, thermal conductivity and absolute bulk absorption, are discussed. It is shown that although some of the properties of CVD diamond (similar to other polycrystalline industrial ceramics) are affected by the grain structure, currently produced CVD diamond optical components have the quality and performance required for numerous demanding applications

  20. INTEGRATED ENERGY EFFICIENT WINDOW-WALL SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Michael Arney, Ph.D.

    2002-12-31

    The building industry faces the challenge of reducing energy use while simultaneously improving construction methods and marketability. This paper describes the first phase of a project to address these concerns by designing an Integrated Window Wall System (IWWS) that can be commercialized. This work builds on previous research conducted during the 1990's by Lawrence Berkeley national Laboratories (LBNL). During this phase, the objective was to identify appropriate technologies, problems and issues and develop a number of design concepts. Four design concepts were developed into prototypes and preliminary energy analyses were conducted Three of these concepts (the foam wall, steel wall, and stiffened plate designs) showed particular potential for meeting the project objectives and will be continued into a second phase where one or two of the systems will be brought closer to commercialization.

  1. Sustainable Agro-Food Industrial Wastewater Treatment Using High Rate Anaerobic Process

    Directory of Open Access Journals (Sweden)

    Yung-Tse Hung

    2013-03-01

    Full Text Available This review article compiles the various advances made since 2008 in sustainable high-rate anaerobic technologies with emphasis on their performance enhancement when treating agro-food industrial wastewater. The review explores the generation and characteristics of different agro-food industrial wastewaters; the need for and the performance of high rate anaerobic reactors, such as an upflow anaerobic fixed bed reactor, an upflow anaerobic sludge blanket (UASB reactor, hybrid systems etc.; operational challenges, mass transfer considerations, energy production estimation, toxicity, modeling, technology assessment and recommendations for successful operation

  2. Regulating industrial wastewater discharged to public wastewater treatment plants - A conceptual approach

    DEFF Research Database (Denmark)

    Grüttner, Henrik

    1997-01-01

    prevention and the implementation of cleaner technology by putting a stress on the industry. Further an approach for the balance between environmental and technological considerations is introduced. The need for easily understandable environmental priorities is stressed and a concept for this is presented......The paper describes some of the basic principles behind the DEPA Guidelines for discharge of industrial wastewater to public sewers set in operation in 1995 and evaluates some of the experiences with the implementation. It is described how such guidelines support the approach of pollution...

  3. Aerobic granulation in a sequencing batch reactor (SBR) for industrial wastewater treatment.

    Science.gov (United States)

    Inizan, M; Freval, A; Cigana, J; Meinhold, J

    2005-01-01

    Aerobic granulation seems to be an a attractive process for COD removal from industrial wastewater, characterised by a high content of soluble organic compounds. In order to evaluate the practical aspects of the process, comparative experimental tests are performed on synthetic and on industrial wastewater, originating from pharmaceutical industry. Two pilot plants are operated as sequencing batch bubble columns. Focus was put on the feasibility of the process for high COD removal and on its operational procedure. For both wastewaters, a rapid formation of aerobic granules is observed along with a high COD removal rate. Granule characteristics are quite similar with respect to the two types of wastewater. It seems that filamentous bacteria are part of the granule structure and that phosphorus precipitation can play an important role in granule formation. For both wastewaters similar removal performances for dissolved biodegradable COD are observed (> 95%). However, a relatively high concentration of suspended solids in the outlet deteriorates the performance with regard to total COD removal. Biomass detachment seems to play a non-negligible role in the current set-up. After a stable operational phase the variation of the pharmaceutical wastewater caused a destabilisation and loss of the granules, despite the control for balanced nutrient supply. The first results with real industrial wastewater demonstrate the feasibility of this innovative process. However, special attention has to be paid to the critical aspects such as granule stability as well as the economic competitiveness, which both will need further investigation and evaluation.

  4. Industrial wastewater treatment with a bioelectrochemical process: assessment of depuration efficiency and energy production.

    Science.gov (United States)

    Molognoni, Daniele; Chiarolla, Stefania; Cecconet, Daniele; Callegari, Arianna; Capodaglio, Andrea G

    2018-01-01

    Development of renewable energy sources, efficient industrial processes, energy/chemicals recovery from wastes are research issues that are quite contemporary. Bioelectrochemical processes represent an eco-innovative technology for energy and resources recovery from both domestic and industrial wastewaters. The current study was conducted to: (i) assess bioelectrochemical treatability of industrial (dairy) wastewater by microbial fuel cells (MFCs); (ii) determine the effects of the applied organic loading rate (OLR) on MFC performance; (iii) identify factors responsible for reactor energy recovery losses (i.e. overpotentials). For this purpose, an MFC was built and continuously operated for 72 days, during which the anodic chamber was fed with dairy wastewater and the cathodic chamber with an aerated mineral solution. The study demonstrated that industrial effluents from agrifood facilities can be treated by bioelectrochemical systems (BESs) with >85% (average) organic matter removal, recovering power at an observed maximum density of 27 W m -3 . Outcomes were better than in previous (shorter) analogous experiences, and demonstrate that this type of process could be successfully used for dairy wastewater with several advantages.

  5. Evaluation of an ASM1 Model Calibration Precedure on a Municipal-Industrial Wastewater Treatment Plant

    DEFF Research Database (Denmark)

    Petersen, Britta; Gernaey, Krist; Henze, Mogens

    2002-01-01

    The purpose of the calibrated model determines how to approach a model calibration, e.g. which information is needed and to which level of detail the model should be calibrated. A systematic model calibration procedure was therefore defined and evaluated for a municipal–industrial wastewater trea...

  6. Study on treatment of industrial wastewater with thorium by the liquid membrane emulsion technology

    International Nuclear Information System (INIS)

    Che Liping; Yu Yongfu; Yuan Jizu

    2005-01-01

    The enrichment of thorium from industrial wastewater with Th 4+ is studied by the liquid membrane emulsion technology of CCl 4 -N205-P204+TBP-HNO 3 . The conditions of making emulsion and the technological factors such as the ratios of oil to inner and water to emulsion, the pH and the extraction time are investigated. (authors)

  7. Celebrating 40 years anaerobic sludge bed reactors for industrial wastewater treatment

    NARCIS (Netherlands)

    Van Lier, J.B.; Van der Zee, F.P.; Frijters, C.T.M.J.; Ersahin, M.E.

    2015-01-01

    In the last 40 years, anaerobic sludge bed reactor technology evolved from localized lab-scale trials to worldwide successful implementations at a variety of industries. High-rate sludge bed reactors are characterized by a very small foot print and high applicable volumetric loading rates. Best

  8. Removable Window System for Space Vehicles

    Science.gov (United States)

    Grady, James P. (Inventor)

    2015-01-01

    A window system for a platform comprising a window pane, a retention frame, and a biasing system. The window pane may be configured to contact a sealing system. The retention frame may be configured to contact the sealing system and hold the window pane against the support frame. The biasing system may be configured to bias the retention frame toward the support frame while the support frame and the retention frame are in a configuration that holds the window pane. Removal of the biasing system may cause the retention frame and the window pane to be removable.

  9. Interactive floating windows: a new technique for stereoscopic video games

    Science.gov (United States)

    Zerebecki, Chris; Stanfield, Brodie; Tawadrous, Mina; Buckstein, Daniel; Hogue, Andrew; Kapralos, Bill

    2012-03-01

    The film industry has a long history of creating compelling experiences in stereoscopic 3D. Recently, the video game as an artistic medium has matured into an effective way to tell engaging and immersive stories. Given the current push to bring stereoscopic 3D technology into the consumer market there is considerable interest to develop stereoscopic 3D video games. Game developers have largely ignored the need to design their games specifically for stereoscopic 3D and have thus relied on automatic conversion and driver technology. Game developers need to evaluate solutions used in other media, such as film, to correct perceptual problems such as window violations, and modify or create new solutions to work within an interactive framework. In this paper we extend the dynamic floating window technique into the interactive domain enabling the player to position a virtual window in space. Interactively changing the position, size, and the 3D rotation of the virtual window, objects can be made to 'break the mask' dramatically enhancing the stereoscopic effect. By demonstrating that solutions from the film industry can be extended into the interactive space, it is our hope that this initiates further discussion in the game development community to strengthen their story-telling mechanisms in stereoscopic 3D games.

  10. Ash behavior during hydrothermal treatment for solid fuel applications. Part 2: Effects of treatment conditions on industrial waste biomass

    International Nuclear Information System (INIS)

    Mäkelä, Mikko; Yoshikawa, Kunio

    2016-01-01

    Highlights: • Effect of treatment conditions on composition and solubility of ash. • Ash dissolution and yield governed by liquid pH and calcium carbonate solubility. • Dissolution of calcium carbonate decreases ash fusion temperature during combustion. • Decreasing the ash content of sludge can weaken ash properties for combustion. - Abstract: This second half of our work on ash behavior concentrates on the effects of hydrothermal treatment conditions on paper sludge. Ash composition and solubility were determined based on treatment temperature, reactor solid load and liquid pH using experimental design and univariate regression methods. In addition, ash properties for combustion were evaluated based on recent developments on ash classification. Based on the results, all experimental variables had a statistically significant effect on ash yields. Only reactor solid load was statistically insignificant for char ash content, which increased based on increasing treatment temperature due to the decomposition of organic components. Ash dissolution and ash yield were governed by liquid pH and the generation of acids mainly due to the solubility of calcium carbonate identified as the main mineral species of paper sludge. Dissolution of calcium carbonate however decreased ash fusion temperatures more likely causing problems during char incineration. This indicated that decreasing the ash content of sludge during hydrothermal treatment can actually weaken ash properties for solid fuel applications.

  11. The investigation of paper mill industry wastewater treatment and activated sludge properties in a submerged membrane bioreactor.

    Science.gov (United States)

    Erkan, Hanife Sari; Engin, Guleda Onkal

    2017-10-01

    The paper mill industry produces high amounts of wastewater and, for this reason, stringent discharge limits are applied for sustainable reclamation and reuse of paper mill industry wastewater in many countries. Submerged membrane bioreactor (sMBR) systems can create new opportunities to eliminate dissolved substances present in paper mill wastewater including. In this study, a sMBR was operated for the treatment of paper mill industry wastewater at 35 h of hydraulic retention time (HRT) and 40 d of sludge retention time (SRT). The chemical oxygen demand (COD), NH 3 -N and total phosphorus (TP) removal efficiencies were found to be 98%, 92.99% and 96.36%. The results demonstrated that sMBR was a suitable treatment for the removal of organic matter and nutrients for treating paper mill wastewater except for the problem of calcium accumulation. During the experimental studies, it was noted that the inorganic fraction of the sludge increased as a result of calcium accumulation in the reactor and increased membrane fouling was observed on the membrane surface due to the calcification problem encountered. The properties of the sludge, such as extracellular polymeric substances (EPS) and soluble microbial products (SMP), relative hydrophobicity, zeta potential and floc size distribution were also monitored. According to the obtained results, the total EPS was found to be 43.93 mg/gMLSS and the average total SMP rejection by the membrane was determined as 66.2%.

  12. Industrial wastewater treatment using higher aquatic vegetation in the former mining company of the Far Eastern Federal district

    Science.gov (United States)

    Krupskaya, L. T.; Zvereva, V. P.; Gula, K. E.; Gul', L. P.; Golubev, D. A.; Filatova, M. Yu.

    2017-09-01

    The article describes the results of studying the problems of industrial wastewater treatment using higher aquatic vegetation (hydrophytes) in the former mining enterprise of the Far Eastern Federal District (FEFD). They are aimed at reducing the negative environment impact of toxic tin ore wastes. The material of research were drainage, mine and slime waters as well as Lemna minor and Common reed grass (Phragmites communis). In the work conventional modern physico-chemical, chemical, biological and mathematical-statistical methods were used, as well as in the process of research the methods of atomic absorption spectrophotometry for AAS and mass spectrometry with inductively coupled plasma on ISP-MS ELASN DRS II PerkinElmer was applied. The data obtained in the course of the experiment (2015-2016), indicate that a degree of wastewater treatment, using Lemna minor, is high. Virtually, all compounds of toxic chemical elements contained in industrial wastewater (zinc, cobalt, nickel, cadmium, iron, manganese, lead, etc.) were fully absorbed by a hydrophyte. Pollutant extraction was almost 95%. The obtained results of the study in laboratory conditions proved the possibility of effective use of the Lemna minor for the purification of drainage and mine waters. A key contribution of this paper is the relationship between possible toxic metals contained in industrial wastewater and a higher degree of absorption by their higher aquatic vegetation. These hydrophytes absorb these possible toxic metals in an aqueous medium and are contaminated with these heavy metals.

  13. Oval Window Size and Shape: a Micro-CT Anatomical Study With Considerations for Stapes Surgery.

    Science.gov (United States)

    Zdilla, Matthew J; Skrzat, Janusz; Kozerska, Magdalena; Leszczyński, Bartosz; Tarasiuk, Jacek; Wroński, Sebastian

    2018-04-11

    The oval window is an important structure with regard to stapes surgeries, including stapedotomy for the treatment of otosclerosis. Recent study of perioperative imaging of the oval window has revealed that oval window niche height can indicate both operative difficulty and subjective discomfort during otosclerosis surgery. With regard to shape, structures incorporated into the oval window niche, such as cartilage grafts, must be compatible with the shape of the oval window. Despite the clinical importance of the oval window, there is little information regarding its size and shape. This study assessed oval window size and shape via micro-computed tomography paired with modern morphometric methodology in the fetal, infant, child, and adult populations. Additionally, the study compared oval window size and shape between sexes and between left- and right-sided ears. No significant differences were found among traditional morphometric parameters among age groups, sides, or sexes. However, geometric morphometric methods revealed shape differences between age groups. Further, geometric morphometric methods provided the average oval window shape and most-likely shape variance. Beyond demonstrating oval window size and shape variation, the results of this report will aid in identifying patients among whom anatomical variation may contribute to surgical difficulty and surgeon discomfort, or otherwise warrant preoperative adaptations for the incorporation of materials into and around the oval window.

  14. Integration of Cleaner Production and Waste Water Treatment on Tofu Small Industry for Biogas Production using AnSBR Reactor

    Science.gov (United States)

    Rahayu, Suparni Setyowati; Budiyono; Purwanto

    2018-02-01

    A research on developing a system that integrates clean production and waste water treatment for biogas production in tofu small industry has been conducted. In this research, tofu waste water was turned into biogas using an AnSBR reactor. Mud from the sewage system serves as the inoculums. This research involved: (1) workshop; (2) supervising; (3) technical meeting; (4) network meeting, and (5) technical application. Implementation of clean production integrated with waste water treatment reduced the amount of waste water to be treated in a treatment plant. This means less cost for construction and operation of waste water treatment plants, as inherent limitations associated with such plants like lack of fund, limited area, and technological issues are inevitable. Implementation of clean production prior to waste water treatment reduces pollution figures down to certain levels that limitations in waste water treatment plants can be covered. Results show that biogas in 16 days HRT in an AnSBR reactor contains CH4(78.26 %) and CO2 (20.16 %). Meanwhile, treatments using a conventional bio-digester result in biogas with 72.16 % CH4 and 18.12 % CO2. Hence, biogas efficiency for the AnSBR system is 2.14 times greater than that of a conventional bio-digester.

  15. Integration of Cleaner Production and Waste Water Treatment on Tofu Small Industry for Biogas Production using AnSBR Reactor

    Directory of Open Access Journals (Sweden)

    Setyowati Rahayu Suparni

    2018-01-01

    Full Text Available A research on developing a system that integrates clean production and waste water treatment for biogas production in tofu small industry has been conducted. In this research, tofu waste water was turned into biogas using an AnSBR reactor. Mud from the sewage system serves as the inoculums. This research involved: (1 workshop; (2 supervising; (3 technical meeting; (4 network meeting, and (5 technical application. Implementation of clean production integrated with waste water treatment reduced the amount of waste water to be treated in a treatment plant. This means less cost for construction and operation of waste water treatment plants, as inherent limitations associated with such plants like lack of fund, limited area, and technological issues are inevitable. Implementation of clean production prior to waste water treatment reduces pollution figures down to certain levels that limitations in waste water treatment plants can be covered. Results show that biogas in 16 days HRT in an AnSBR reactor contains CH4(78.26 % and CO2 (20.16 %. Meanwhile, treatments using a conventional bio-digester result in biogas with 72.16 % CH4 and 18.12 % CO2. Hence, biogas efficiency for the AnSBR system is 2.14 times greater than that of a conventional bio-digester.

  16. Slaughterhouse wastewater characteristics, treatment, and management in the meat processing industry: A review on trends and advances.

    Science.gov (United States)

    Bustillo-Lecompte, Ciro Fernando; Mehrvar, Mehrab

    2015-09-15

    A thorough review of advancement in slaughterhouse wastewater (SWW) characteristics, treatment, and management in the meat processing industry is presented. This study also provides a general review of the environmental impacts, health effects, and regulatory frameworks relevant to the SWW management. A significant progress in high-rate anaerobic treatment, nutrient removal, advanced oxidation processes (AOPs), and the combination of biological treatment and AOPs for SWW treatment is highlighted. The treatment processes are described and few examples of their applications are given. Conversely, few advances are accounted in terms of waste minimization and water use reduction, reuse, and recycle in slaughterhouses, which may offer new alternatives for cost-effective waste management. An overview of the most frequently applied technologies and combined processes for organic and nutrient removal during the last decade is also summarized. Several types of individual and combined processes have been used for the SWW treatment. Nevertheless, the selection of a particular technology depends on the characteristics of the wastewater, the available technology, and the compliance with regulations. This review facilitates a better understanding of current difficulties that can be found during production and management of the SWW, including treatment and characteristics of the final effluent. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. The potential use of ionising energy treatment in Queensland's horticultural industries

    International Nuclear Information System (INIS)

    Heather, N.W.; Sheehy, P.T.; Muirhead, I.F.; Brown, B.I.; Hassall, R.N.

    1985-01-01

    The potential application of ionising energy treatment technology in Queensland falls into three categories: insect disinfestation, disease control and quality improvement. The technology fulfils the requirements of a disinfestation treatment against Queensland fruit fly and other pests of quarantine importance in respect to efficacy, absence of phytotoxicity, absence of residues and, on technical considerations would be an ideal replacement for the fumigant EDB. The report examines the purposes of ionising energy treatment, economic and marketing aspects and research needs

  18. Description of station waste water treatment and study of reclaiming industry ceramic red

    International Nuclear Information System (INIS)

    Yadava, Y.P.; Rego, S.A.B.C.; Junior, B.S.; Bezerra, L.P.; Ferreira, R.A.S.

    2012-01-01

    So that the water meets potability standards required by the laws it passes through various treatment processes which generate waste called WTS (Water Treatment Sludge). This sludge is disposed of without any processing, however, environmental agencies and the public are demanding alternatives to this situation. Knowing this, this study aims to characterize the sludge from the Water Treatment Plant Botafogo and analyze its viability as a feedstock in the manufacture of red bricks. (author)

  19. Applicability of Fenton Process for Treatment of Industrial Effluents: A Review

    OpenAIRE

    Mehali Mehta; Swati Parekh

    2014-01-01

    Wastewater and effluent treatment has undergone innovative changes over the years. Traditional wastewater treatment has yielded to modern and path-breaking procedures which are more efficient and effective. The world of difficulties and unknown has opened new avenues and paths to highly feasible effluent treatment procedures, so the vigorous importance of advanced oxidation procedures. This review paper will delineate the increasing importance of various advanced oxidation process...

  20. Characterization, treatment and utilization of rice husk ash in production processes of the industrial branch

    International Nuclear Information System (INIS)

    Stracke, Marcelo Paulo; Schmidt, Julia Isabel; Steffen, Ana Cristina; Sokolovicz, Boris; Kieckow, Flavio

    2016-01-01

    The rice husk ash (CCA) is a black powder rich in silica (contents above 90%) with many industrial applications. The ash was obtained from a rice processing industry in the state of Rio Grande do Sul. In this work the purpose is to characterize the rice husk ash and eliminate the residual carbon by methods such as acid leaching. The white ash is obtained by a chemical process followed by heating between 600 and 800 °C. The results were analyzed in DR-X, TGA and DSC. The DR-X analysis showed that the samples present high levels of silica in the crystalline form of quartz, cristobalite and tridymite. The white ash was obtained with high purity and presented a good result in the manufacture of paints. (author)

  1. Pollution prevention and wastewater treatment in fish canning industries of Northern Portugal

    OpenAIRE

    Cristovão, Raquel; Martins, Ramiro; Boaventura, Rui

    2012-01-01

    The main environmental problems of fish canning industries are high water consumption and high organic matter, oil and grease and salt content in their wastewaters. This work aims to analyze the situation (water consumption, wastewater production, wastewater characterization, etc.) of different plants located north of Douro river, in Portugal, in order to propose various solutions to their problems. Thus, initially it was made an identification and implementation of prevent and control pollut...

  2. Zebra mussel filtration and its potential uses in industrial water treatment.

    Science.gov (United States)

    Elliott, Paul; Aldridge, David C; Moggridge, Geoff D

    2008-03-01

    The zebra mussel (Dreissena polymorpha) is a notorious freshwater biofouling pest, and populations of the species can alter aquatic environments through their substantial filtration capabilities. Despite the ecological importance of zebra mussel filtration, many predictions of their large-scale effects on ecosystems rely on extrapolations from filtration rates obtained in static laboratory experiments, not accounting for natural mussel densities, boundary layer effects, flow rates or elevated algal concentrations. This study used large-scale industrial flume trials to investigate the influence of these factors on zebra mussel filtration and proposes some novel industrial applications of these findings. The flume trials revealed some of the highest zebra mussel clearance rates found to date, up to 574+/-20mlh(-1)g(-1) of wet tissue mass. Under low algal concentrations, chlorophyll a removal by zebra mussels was not proportional to mussel density, indicating that field rates of zebra mussel grazing may be much lower than previous studies have predicted. Increasing ambient velocities up to 100mls(-1) ( approximately 4cms(-1)) led to increased clearance rates by zebra mussels, possibly due to the replenishment of locally depleted resources, but higher velocities of 300mls(-1) (12cms(-1)) did not lead to further significant increases in clearance rate. When additional algal cultures were dosed into the flumes, chlorophyll a removal increased approximately logarithmically with zebra mussel density and there were no differences in the clearance of three different species of alga: Ankyra judayi, Pandorina morum and Cyclotella meneghinia. Some novel industrial uses of these zebra mussel filtration studies are proposed, such as: (1) helping to inform models that predict the large-scale grazing effects of the mussels, (2) allowing estimates of zebra mussel densities in industrial pipelines, and (3) constructing large-scale biofilters for use in water clarification.

  3. *NEW* CRITICAL Windows Security patches

    CERN Multimedia

    2003-01-01

    On 3 October and 10 September 2003, Microsoft issued new CRITICAL security patches MS03-040 and MS03-039. They must be URGENTLY applied on ALL WINDOWS systems, which are not centrally managed for security patches. This includes Experiment computers, Home computers and Windows Portable and Desktop systems not running NICE. Details of the security holes and patches are at: MS03-039: http://cern.ch/it-div/news/hotfix-MS03-039.asp http://www.microsoft.com/technet/security/bulletin/MS03-039.asp MS03-040: http://cern.ch/it-div/news/hotfix-MS03-040.asp http://www.microsoft.com/technet/security/bulletin/MS03-040.asp

  4. Hydrolytic pre-treatment methods for enhanced biobutanol production from agro-industrial wastes.

    Science.gov (United States)

    Maiti, Sampa; Gallastegui, Gorka; Suresh, Gayatri; Sarma, Saurabh Jyoti; Brar, Satinder Kaur; Drogui, Patrick; LeBihan, Yann; Buelna, Gerardo; Verma, Mausam; Soccol, Carlos Ricardo

    2018-02-01

    Brewery industry liquid waste (BLW), brewery spent grain (BSG), apple pomace solid wastes (APS), apple pomace ultrafiltration sludge (APUS) and starch industry wastewater (SIW) have been considered as substrates to produce biobutanol. Efficiency of hydrolysis techniques tested to produce fermentable sugars depended on nature of agro-industrial wastes and process conditions. Acid-catalysed hydrolysis of BLW and BSG gave a total reducing sugar yield of 0.433 g/g and 0.468 g/g respectively. Reducing sugar yield from microwave assisted hydrothermal method was 0.404 g/g from APS and 0.631 g/g from APUS, and, 0.359 g/g from microwave assisted acid-catalysed SIW dry mass. Parameter optimization (time, pH and substrate concentration) for acid-catalysed BLW hydrolysate utilization using central composite model technique produced 307.9 g/kg glucose with generation of inhibitors (5-hydroxymethyl furfural (20 g/kg), furfural (1.6 g/kg), levulinic acid (9.3 g/kg) and total phenolic compound (0.567 g/kg)). 10.62 g/L of acetone-butanol-ethanol was produced by subsequent clostridial fermentation of the substrate. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Coordinated risk informed regulation: a conceptual approach illustrated by the industry of phytosanitary radiation treatment

    International Nuclear Information System (INIS)

    Wieland, Patricia

    2012-01-01

    Regulatory bodies control areas such as health, environment, safety, transportation, finance or any other area of strategic importance to the national sustainable development, where the free activity of economic agents will not lead to socially desirable results. In Brazil, industrial activities impacting on different social and economic segments may be subject to regulation by several governmental agencies, with different cultures, requirements, procedures, and deadlines. To approve an industrial undertaking, most often each regulator analyzes in isolation the aspect of its concern. Also in monitoring and enforcement, the agencies usually act individually. The proliferation and fragmentation of regulation have, in some cases, delayed or even inhibited the development of industrial activities, and thus, working against the very purpose of regulation. This thesis illustrates the current situation with the regulation on food irradiation services, proposes and justifies an organizational structure to enhance coordination among regulatory agencies by aligning their activities and avoiding inconsistencies, overlaps and omissions. This structure comprises, among other mechanisms, a single Internet portal on Federal Regulation, an integrated and dynamic risk analysis and the harmonization of decision-making. The purpose is to promote regulation predictability, regulatory action consistency, optimization of public resources, transparency in the agencies' decision making, and to bring benefits to the entrepreneurs by offering them real-time monitoring and more agile processes. (author)

  6. Purifying waste waters in the surface treatment industry; Depuracion de las aguas residuales en la industria de tratamiento de superficies

    Energy Technology Data Exchange (ETDEWEB)

    Queralt Torrell, R.; Martinez Hidalgo, E. [Generalitat de Catalunya. Barcelona (Spain)

    1999-07-01

    The electrolytic coating industry in Spain comprises some 2,000 firms whose waste waters are highly problematic, mainly due to the presence of heavy metals and cyanides. This article sets out series of internal measures for conserving the baths, reducing entrainment and optimising washes, thereby minimising the volume and concentration of the waste waters. It also discusses the advantages and disadvantages of the different chemical reagents employed in the physicochemical treatment of waste waters during the oxidation/reduction and metal precipitation processes. In addition, it mentions other techniques such as the use of ion exchange resins, membranes and electro-coagulation, which are becoming increasingly widespread. Finally, it offers a summary report on 11 waste water treatment facilities installed in different surface treatment factories. (Author) 21 refs.

  7. Electrochromic Windows: Advanced Processing Technology

    Energy Technology Data Exchange (ETDEWEB)

    SAGE Electrochromics, Inc

    2006-12-13

    This project addresses the development of advanced fabrication capabilities for energy saving electrochromic (EC) windows. SAGE EC windows consist of an inorganic stack of thin films deposited onto a glass substrate. The window tint can be reversibly changed by the application of a low power dc voltage. This property can be used to modulate the amount of light and heat entering buildings (or vehicles) through the glazings. By judicious management of this so-called solar heat gain, it is possible to derive significant energy savings due to reductions in heating lighting, and air conditioning (HVAC). Several areas of SAGE’s production were targeted during this project to allow significant improvements to processing throughput, yield and overall quality of the processing, in an effort to reduce the cost and thereby improve the market penetration. First, the overall thin film process was optimized to allow a more robust set of operating points to be used, thereby maximizing the yield due to the thin film deposition themselves. Other significant efforts aimed at improving yield were relating to implementing new procedures and processes for the manufacturing process, to improve the quality of the substrate preparation, and the quality of the IGU fabrication. Furthermore, methods for reworking defective devices were developed, to enable devices which would otherwise be scrapped to be made into useful product. This involved the in-house development of some customized equipment. Finally, the improvements made during this project were validated to ensure that they did not impact the exceptional durability of the SageGlass® products. Given conservative estimates for cost and market penetration, energy savings due to EC windows in residences in the US are calculated to be of the order 0.026 quad (0.026×1015BTU/yr) by the year 2017.

  8. Cross-linked cyclodextrin-based material for treatment of metals and organic substances present in industrial discharge waters

    Science.gov (United States)

    Euvrard, Élise; Morin-Crini, Nadia; Druart, Coline; Bugnet, Justine; Martel, Bernard; Cosentino, Cesare; Moutarlier, Virginie

    2016-01-01

    Summary In this study, a polymer, prepared by crosslinking cyclodextrin (CD) by means of a polycarboxylic acid, was used for the removal of pollutants from spiked solutions and discharge waters from the surface treatment industry. In spiked solutions containing five metals, sixteen polycyclic aromatic hydrocarbons (PAH) and three alkylphenols (AP), the material exhibited high adsorption capacities: >99% of Co2+, Ni2+ and Zn2+ were removed, between 65 and 82% of the PAHs, as well as 69 to 90% of the APs. Due to the structure of the polymer and its specific characteristics, such as the presence of carboxylic groups and CD cavities, the adsorption mechanism involves four main interactions: ion exchange, electrostatic interactions and precipitation for metal removal, and inclusion complexes for organics removal. In industrial discharge waters, competition effects appeared, especially because of the presence of calcium at high concentrations, which competed with other pollutants for the adsorption sites of the adsorbent. PMID:27829889

  9. Cross-linked cyclodextrin-based material for treatment of metals and organic substances present in industrial discharge waters

    Directory of Open Access Journals (Sweden)

    Élise Euvrard

    2016-08-01

    Full Text Available In this study, a polymer, prepared by crosslinking cyclodextrin (CD by means of a polycarboxylic acid, was used for the removal of pollutants from spiked solutions and discharge waters from the surface treatment industry. In spiked solutions containing five metals, sixteen polycyclic aromatic hydrocarbons (PAH and three alkylphenols (AP, the material exhibited high adsorption capacities: >99% of Co2+, Ni2+ and Zn2+ were removed, between 65 and 82% of the PAHs, as well as 69 to 90% of the APs. Due to the structure of the polymer and its specific characteristics, such as the presence of carboxylic groups and CD cavities, the adsorption mechanism involves four main interactions: ion exchange, electrostatic interactions and precipitation for metal removal, and inclusion complexes for organics removal. In industrial discharge waters, competition effects appeared, especially because of the presence of calcium at high concentrations, which competed with other pollutants for the adsorption sites of the adsorbent.

  10. The flexibility window in zeolites.

    Science.gov (United States)

    Sartbaeva, Asel; Wells, Stephen A; Treacy, M M J; Thorpe, M F

    2006-12-01

    Today synthetic zeolites are the most important catalysts in petrochemical refineries because of their high internal surface areas and molecular-sieving properties. There have been considerable efforts to synthesize new zeolites with specific pore geometries, to add to the 167 available at present. Millions of hypothetical structures have been generated on the basis of energy minimization, and there is an ongoing search for criteria capable of predicting new zeolite structures. Here we show, by geometric simulation, that all realizable zeolite framework structures show a flexibility window over a range of densities. We conjecture that this flexibility window is a necessary structural feature that enables zeolite synthesis, and therefore provides a valuable selection criterion when evaluating hypothetical zeolite framework structures as potential synthetic targets. We show that it is a general feature that experimental densities of silica zeolites lie at the low-density edge of this window--as the pores are driven to their maximum volume by Coulomb inflation. This is in contrast to most solids, which have the highest density consistent with the local chemical and geometrical constraints.

  11. Rugged Ceramic Window for RF Applications

    International Nuclear Information System (INIS)

    Neubauer, Michael; Johnson, Rolland P.; Rimmer, Robert; Elliot, Tom; Stirbet, Mircea

    2009-01-01

    High-current RF cavities that are needed for many accelerator applications are often limited by the power transmission capability of the pressure barriers (windows) that separate the cavity from the power source. Most efforts to improve RF window design have focused on alumina ceramic, the most popular historical choice, and have not taken advantage of new materials. Alternative window materials have been investigated using a novel Merit Factor comparison and likely candidates have been tested for the material properties which will enable construction in the self-matched window configuration. Window assemblies have also been modeled and fabricated using compressed window techniques which have proven to increase the power handling capability of waveguide windows. Candidate materials have been chosen to be used in fabricating a window for high power testing at Thomas Jefferson National Accelerator Facility.

  12. Industrial Products for Beam Instrumentation

    CERN Document Server

    Schmickler, Hermann

    2001-01-01

    In various branches of high technology industry there has been considerable progress in the past years which could be used for beam instrumentation. The subject will be introduced by two short demonstrations: a demonstration of modern audio electronics with 24bit-96kHz ADC, digital signal electronics and application programs under windows on a PC, which allow to change the parameters of the signal treatment. Potential applications are data monitoring at constant sampling frequency, orbit feedbacks (including high power audio amplifiers), noise reduction on beam current transformers... digital treatment of video signals webcams, frame grabbers, CCD-data via USB, all one needs for image acquisitions, in particular interesting for profile measurements. These introductory demonstrations will not last longer than 30 minutes. The remaining time will be used to pass through the audience collecting information into a two dimensional table, which shall contain as row index the accelerator and as column index the t...

  13. Why and by whom the American alcoholism treatment industry is under siege.

    Science.gov (United States)

    Peele, S

    1990-01-01

    Conventional disease-based inpatient alcoholism treatment is under attack in the United States and internationally because it accomplishes little beyond simple counseling and is less effective than other life-skill-oriented therapies. Nonetheless, disease-model adherents retain a stranglehold on American alcoholism treatment and attack all "nontraditionalists" who question their approaches. One such attack by Wallace (1989) is discussed. In addition, Wallace's claim that his treatment program at Edgehill Newport as well as other private treatment centers have remission rates ten times as high as those found for typical hospital treatments is examined critically. Finally, the group of researchers who question at least some elements of the standard wisdom about alcoholism and addiction is found to include nearly every major research figure in the field.

  14. The Kaldnes Moving Bed biofilm technology for treatment of industrial wastewater; Tecnologia Kaldnes Moving Bed biofilm (KMT) para la depuracion de aguas residuales industriales

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, V.; Garcia Carrion, M.; Farre Solsona, C.

    2004-07-01

    The Kaldnes Moving bed biofilm technology is a biofilm process which is very suitable for treatment of industrial wastewaters. Biofilm processes have several acknowledged advantages compared to suspended biomass processes, e. g. resistance to toxicity and load variations. Traditionally biofilm processes have been known to clog at high loads and hence have not been suited for industrial effluents: however, the Kaldnes Moving Bed biofilm process has overcome this problem. This article describes how the process has been used as pre-treatment up front of activated sludge at a dairy in USA, and as sole treatment at pharmaceutical industry in Sweden. (Author)

  15. Microsoft Windows Intune 20 Quickstart Administration

    CERN Document Server

    Overton, David

    2012-01-01

    This book is a concise and practical tutorial that shows you how to plan, set up and maintain Windows Intune and manage a group of PCs. If you are an administrator or partner who wants to plan, set up and maintain Windows Intune and manage a group of PCs then this book is for you . You should have a basic understanding of Windows administration, however, knowledge of Windows Intune would not be required.

  16. Beryllium window for an APS diagnostics beamline

    International Nuclear Information System (INIS)

    Sheng, I.C.; Yang, B.X.; Sharma, Y.S.

    1997-01-01

    A beryllium (Be) window for an Advanced Photon Source (APS) diagnostics beamline has been designed and built. The window, which has a double concave axisymmetrical profile with a thickness of 0.5 mm at the center, receives 160 W/mm 2 (7 GeV/100 mA stored beam) from an undulator beam. The window design as well as thermal and thermomechanical analyses, including thermal buckling of the Be window, are presented

  17. Windows and Envelope R&D Opportunities Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Building Technologies Office

    2018-02-01

    BTO's Emerging Technologies program held a two-day workshop on “Windows and Envelope R&D Opportunities” on May 31 and June 1, 2017 at the Illinois Institute of Technology in Chicago, Illinois. A broad range of about 100 experts from industry, academia, national laboratories, and government participated, contributing their ideas, insights, and perspectives. Their feedback is intended to help inform and augment BTO’s research and development activities.

  18. Spatial scan statistics using elliptic windows

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl; Wegener, Henrik Caspar

    2006-01-01

    windows and propose a new way to present the information when a spatial point process is considered. This method gives smooth changes for smooth expansions of the set of clusters. A simulation study is used to show how the elliptic windows outperforms the usual circular windows. The proposed method...

  19. Spatial scan statistics using elliptic windows

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl; Wegener, Henrik Caspar

    of confocal elliptic windows and propose a new way to present the information when a spatial point process is considered. This method gives smooth changes for smooth expansions of the set of clusters. A simulation study is used to show how the elliptic windows outperforms the usual circular windows...

  20. Travailler avec Windows 7 au CERN

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). Le plan de migration à Windows 7 sera aussi débattu.

  1. Travailler avec Windows 7 au CERN

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). Le plan de migration à Windows 7 sera aussi débattu.

  2. Modelling window opening behaviour in Danish dwellings

    DEFF Research Database (Denmark)

    Andersen, Rune Vinther; Olesen, Bjarne W.; Toftum, Jørn

    2011-01-01

    In this paper we present and analyse data from two studies of window opening behaviour in residential buildings in Denmark. Based on measurements of indoor environment, weather and window opening behaviour in 15 dwellings, we propose a model that will predict window opening behaviour. The data...

  3. The regulatory treatment of adverse outcomes: Empirical evidence from the electric utility industry

    International Nuclear Information System (INIS)

    Ryan, N.E.

    1991-01-01

    This dissertation consists of two essays, both of them empirical studies using data from the US electric utility industry. Part I focuses on utilities' investment behavior, while Part II examines regulatory policy toward the industry. The first paper presents an analysis of utilities' decisions about whether to continue or cancel nuclear construction projects. During the seventies and eighties, changes in economic conditions and regulatory policy radically altered the costs and benefits of nuclear power. This study seeks to determine whether regulators pursued policies which induced utilities to employ socially efficient criteria in re-evaluating ongoing projects. The analysis also yields insights into regulators' distributional goals. Results based on data for 1978-84 are consistent with the capture theory hypothesis, which holds that regulators weigh industry interests more heavily than consumer interests. A test for structural change provides no support for the contention that the relative importance of consumer interests increased over this period. These empirical findings are inconsistent with a standard (and essential) assumption of theoretical principal-agent models of rate-of-return regulation, that regulators value consumers' payoffs more than utility profits. The second paper examines regulatory policy toward generating facilities that entered commercial service during the years 1983-88. In a significant departure from past practice, state public utility commissions often denied utilities full recovery of their investments in new plants. Although such ex post disallowances have an important efficiency rationale, they also provide a means for opportunistic regulators to effect transfers between utilities' ratepayers and shareholders. A probit model was used to assess the impact on the probability of a disallowance of firm and project characteristics as well as attributes of a state's political and institutional environment

  4. Evolution of reuse of sludge from water treatment plant in the red ceramic industry

    International Nuclear Information System (INIS)

    Rodrigues, R.A.; Martins, B.E.D.B.S.; Couto, V.M.P.; Campos, J.C.; Almeida, V.C.

    2011-01-01

    The ceramic industry has enormous potential to absorb wastes. The main objective of this study was to investigate whether the use of a sludge (WTP) in the physical and mechanical properties of the burning of a red ceramic body. Compositions were prepared with different percentages of mud by the method of forming the pressed and sintered at 900 deg C, 1000 deg C and 1100 ° C. The specimens were tested for linear shrinkage, water absorption, porosity and stress rupture flexion. Were characterized by X-ray fluorescence, X-ray diffraction and Scanning Electron Microscopy. The results show that the incorporation of sludge WTP changes the quality of ceramics. (author)

  5. Industry Responsibilities in Tackling Direct-to-Consumer Marketing of Unproven Stem Cell Treatments.

    Science.gov (United States)

    Master, Z; Fu, W; Paciulli, D; Sipp, D

    2017-08-01

    The direct-to-consumer marketing of unproven stem cell interventions (SCIs) is a serious public health concern. Regulations and education have had modest impact, indicating that different actors must play a role to stop this unfettered market. We consider the role of the biotech industry in tackling unproven SCIs. Grounded in the concept of corporate social responsibility, we argue that biotech companies should screen consumers to ensure that products and services are being used appropriately and educate employees about unproven SCIs. © 2017 ASCPT.

  6. Ozone/UV treatment to enhance biodegradation of surfactants in industrial wastewater. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Cline, J.E. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Sullivan, P.F. [Specialty Industrial Products, Inc., Spartanburg, SC (United States); Lovejoy, M.A.; Collier, J. [Sun River Innovations, Ltd., Lexington, KY (United States); Adams, C.D. [Univ. of Missouri, Rolla, MO (United States)

    1996-10-01

    The new owners of a surfactant manufacturing plant wanted to triple production but were limited by the plant`s wastewater treatment capacity. Mass balance calculations indicated that little aerobic biodegradation was occurring in the plant`s wastewater treatment system. Literature reviews and laboratory tests confirmed that as much as 60% of the plant`s products might resist aerobic biodegradation. Overall chemical losses, both solid and aqueous, were estimated at 3.8% of theoretical. Organic loadings to the wastewater treatment system were 170 kg/d of which 50 kg/d reached the biological treatment system. Pollution prevention measures have allowed a > 20% increase in production levels with a > 30% decrease in effluent volume and no increase in discharge of chemical oxygen demand (COD). A new dissolved air flotation (DAF) system removes 70% of the organic loading. Sludge volumes are lower by an order of magnitude than with the clarifier/drum-filter process it replaced.

  7. Zeolites applications in pollution control; radioactive-, municipal-, industrial- and agricultural-waste water treatments: part-I

    International Nuclear Information System (INIS)

    Akbar, S.

    1991-01-01

    Zeolite cations exchangers provide a unique combination of selectivity, capacity and stability not available in other ion-exchangers. In this era of environmental concern, the attractive physical and chemical properties of zeolites have been utilized worldwide in the solution to this problem. The desirable characteristics of high ion-exchange selectivity and resistance to radiolytic degradation have made certain zeolites quite useful for the separation and purification of radioisotopes from radioactive wastewater. Zeolites have also been effectively used in nuclear industry for treatment of radioactive wastes and selectively removing ammonium ions from wastewater. (author)

  8. Osmosis process for leachate treatment in industrial platform: Economic and performances evaluations to zero liquid discharge.

    Science.gov (United States)

    Cingolani, Diego; Eusebi, Anna Laura; Battistoni, Paolo

    2017-12-01

    The industrial processes require large quantities of water. The presence of discharges results not only in significant environmental impact but implies wastage of water resources. This problem could be solved treating and reusing the produced wastewaters and applying the new zero liquid discharge approach. This paper discusses the design and the performances of reverse osmosis membranes for the upgrading of full scale platform for industrial liquid wastes. The final effluent from the ultrafiltration unit of the full scale plant was monitored to design the reverse osmosis unit. Previous modelling phase was used to evaluate the specific ordinary and maintenance costs and the final effluent quality (2.7 €/m 3 ). The system was designed in triple stages at different operative pressures. The economic feasibility and the payback period of the technology at different percentages of produced permeate were determined. The recovery of 90% was identified as profitable for the reverse osmosis application. One experimental pilot plant applying the reverse osmosis was used to test the final effluent. Moreover, the same flow was treated with second pilot system based on the forward osmosis process. The final efficiencies were compared. Removals higher than 95% using the reverse system were obtained for the main macropollutants and ions. No sustainable applicability of the forward osmosis was determined. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Novel Electrochemical Treatment of Spent Caustic from the Hydrocarbon Industry Using Ti/BDD

    Directory of Open Access Journals (Sweden)

    Alejandro Medel

    2015-01-01

    Full Text Available During the crude oil refining process, NaOH solutions are used to remove H2S, H2Saq, and sulfur compounds from different hydrocarbon streams. The residues obtained are called “spent caustics.” These residues can be mixed with those obtained in other processes, adding to its chemical composition naphthenic acids and phenolic compounds, resulting in one of the most dangerous industrial residues. In this study, the use of electrochemical technology (ET, using BDD with Ti as substrate (Ti/BDD, is evaluated in electrolysis of spent caustic mixtures, obtained through individual samples from different refineries. In this way, the Ti/BDD’s capability of carrying out the electrochemical destruction of spent caustics in an acidic medium is evaluated having as key process a chemical pretreatment phase. The potential production of •OHs, as the main reactive oxygen species electrogenerated over Ti/BDD surface, was evaluated in HCl and H2SO4 through fluorescence spectroscopy, demonstrating the reaction medium’s influence on its production. The results show that the hydrocarbon industry spent caustics can be mineralized to CO2 and water, driving the use of ET and of the Ti/BDD to solve a real problem, whose potential and negative impact on the environment and on human health is and has been the environmental agencies’ main focus.

  10. Anaerobic treatment of agro-industrial wastewaters for COD removal in expanded granular sludge bed bioreactor

    Directory of Open Access Journals (Sweden)

    Abumalé Cruz-Salomón

    2017-12-01

    Full Text Available Untreated agro-industrial wastewaters are undesirable in the aquatic environment due to the presence of high organic matter contents. However, they may constitute a large potential for biogas production. The present investigation is focused on three laboratory-scale anaerobic expanded granular sludge bed (EGSB bioreactors, continuously operated for 60 d under mesophilic condition with the aim of exploring the feasibility of treating three most significant agro-industrial wastewaters in Chiapas, Mexico (i.e., cheese whey, vinasse, and coffee-processing wastewater. The EGSB bioreactors were operated with a hydraulic retention time (HRT of 6 d under stable conditions (i.e., buffer index (BI of 0.31, 0.34, and 0.03, generating a maximum chemical oxygen demand (COD removal efficiency of 91, 74, and 96% with an average methane production of 340, 245, and 300 mL/g COD∙d for cheese whey, vinasse, and coffee-processing wastewater, respectively. According to the obtained results, the EGSB bioreactors could be a sustainable alternative to simultaneously solve the environmental problems and to produce bioenergy.

  11. Membrane treatment by nanofiltration of exhausted vegetable tannin liquors from the leather industry.

    Science.gov (United States)

    Cassano, A; Adzet, J; Molinari, R; Buonomenna, M G; Roig, J; Drioli, E

    2003-05-01

    A rational use of water in the leather industry is described by applying the criteria of "clean technologies" by means of membrane processes. A nanofiltration (NF) process was used for recovering tannins and water from exhausted baths and reusing them as tanning agents and washings. Results of experiments performed on laboratory and semi-industrial pilot scale plants, operating and fluid-dynamic conditions and mass balance of the NF process are reported and discussed. Chemical and physical analytical values measured on skins treated with the recovered solutions were very similar to those measured on control skins tanned with standard solutions. According to the obtained results, a process scheme is suggested. It permits both to recover water and to increase the tannin/non tannin (T/NT) ratio in the retentate solution, starting from exhausted tanning baths and by using a NF membrane purification/concentration. The final volume reduction factor of tested exhausted baths was 5.25, the increase of T/NT ratio was from 1.1 to 2.3 and the average permeate flux was 12.5l/m(2)h. Advantages are in terms of: reduction of environmental impact (up to 75% of COD reduction of the global effluent), simplification of cleaning-up processes of wastewaters, decrease of disposal costs, saving of chemicals and water.

  12. Sequential in situ hydrotalcite precipitation and biological denitrification for the treatment of high-nitrate industrial effluent.

    Science.gov (United States)

    Cheng, Ka Yu; Kaksonen, Anna H; Douglas, Grant B

    2014-11-01

    A sequential process using hydrotalcite precipitation and biological denitrification was evaluated for the treatment of a magnesium nitrate (Mg(NO3)2)-rich effluent (17,000mgNO3(-)-N/L, 13,100mgMg/L) generated from an industrial nickel-mining process. The hydrotalcite precipitation removed 41% of the nitrate (7000mgNO3(-)-N/L) as an interlayer anion with an approximate formula of Mg5Al2(OH)14(NO3)2·6H2O. The resultant solute chemistry was a Na-NO3-Cl type with low trace element concentrations. The partially treated effluent was continuously fed (hydraulic retention time of 24h) into a biological fluidised bed reactor (FBR) with sodium acetate as a carbon source for 33days (1:1 v/v dilution). The FBR enabled >70% nitrate removal and a maximal NOx (nitrate+nitrite) removal rate of 97mg NOx-N/Lh under alkaline conditions (pH 9.3). Overall, this sequential process reduced the nitrate concentration of the industrial effluent by >90% and thus represents an efficient method to treat Mg(NO3)2-rich effluents on an industrial scale. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Expert Meeting Report: Windows Options for New and Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Ojczyk, C.; Carmody, J.; Haglund, K.

    2013-05-01

    The NorthernSTAR Building America Partnership held an Expert Meeting on Windows Options for New and Existing Homes on November 14, 2011 at the Nolte Building on the campus of the University of Minnesota in Minneapolis, MN. Featured speakers included John Carmody and Pat Huelman of the University of Minnesota, Charlie Curcija of Lawrence Berkeley National Laboratory, Jim Larson of Cardinal Glass Industries, Peter Yost of Building Green, Peter Baker of Building Science Corporation, and Theresa Weston of Du Pont Innovations. Audience participation was actively encouraged during each presentation to uncover need and promote dialog among researchers and industry professionals.

  14. Expert Meeting Report. Windows Options for New and Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Ojczyck, C. [Univ. of Minnesota, St. Paul, MN (United States); Carmody, J. [Univ. of Minnesota, St. Paul, MN (United States); Haglund, K. [Univ. of Minnesota, St. Paul, MN (United States)

    2013-05-01

    The NorthernSTAR Building America Partnership held an Expert Meeting on Windows Options for New and Existing Homes on November 14, 2011, at the Nolte Building on the campus of the University of Minnesota in Minneapolis, MN. Featured speakers included John Carmody and Pat Huelman of the University of Minnesota, Charlie Curcija of Lawrence Berkeley National Laboratory, Jim Larson of Cardinal Glass Industries, Peter Yost of Building Green, Peter Baker of Building Science Corporation, and Theresa Weston of Du Pont Innovations. Audience participation was actively encouraged during each presentation to uncover need and promote dialog among researchers and industry professionals.

  15. Performance of metal compound on thermolysis and electrolysis on sugar industries waste water treatment: COD and color removal with sludge analysis (batch-experiment)

    Science.gov (United States)

    Sahu, Omprakash

    2017-10-01

    The sugar cane industry is one of the most water demanding industries. Sugar industries consume and generate excess amount of water. The generated water contains organic compounds, which would cause pollution. The aim of this research work is to study the effectiveness of metal compound for treatment of sugar industry waste water by thermolysis and electrolysis process. The result shows ferrous metal catalyst shows 80 and 85 % chemical oxygen demand and color removal at pH 6, optimum mass loading 4 kg/m3, treatment temperature 85 °C and treatment time 9 h. When ferrous material was used as electrode, maximum 81 % chemical oxygen demand and 84 % color removal at pH 6, current density 156 Am-2, treatment time 120 min and anode consumption 0.7 g for 1.5 L wastewater were obtained.

  16. Reception and treatment facilities for waste oils and oil-polluted waters from marine and industrial activities in Gothenburg, Sweden

    International Nuclear Information System (INIS)

    Andersson, K.; Lexen, S.I.; Hell, M.

    1992-01-01

    At the beginning of the 1980s, comprehensive solutions were found to problems associated with the handling of oil-polluted water from marine and industrial sources in the Gothenburg area. The treatment plant in the oil harbour has permission to treat 700,000 m 3 /yr of sludge, ballast, slops and other oil-contaminated waters. Following treatment by chemical flocculation, flotation and dual-media filtration, the treated water must not contain more than 5 ppm of oil. Work to improve treatment results has been carried out from the start, in close co-operation with environmental authorities and with the waste generators themselves. Through increased consciousness, improvements in control, and greater source separation, it will be possible to bring about a significantly lower concentration of pollutants in the incoming waste streams. Recent plans include separate treatment of waste streams containing aromatic compounds and heavily polluted waters. Complementary treatment methods, such as activated carbon and air stripping, are under evaluation. (author). 10 figs

  17. Windows Command Line Administration Instant Reference

    CERN Document Server

    Mueller, John Paul

    2010-01-01

    The perfect companion to any book on Windows Server 2008 or Windows 7, and the quickest way to access critical information. Focusing just on the essentials of command-line interface (CLI), Windows Command-Line Administration Instant Reference easily shows how to quickly perform day-to-day tasks of Windows administration without ever touching the graphical user interface (GUI). Specifically designed for busy administrators, Windows Command-Line Administration Instant Reference replaces many tedious GUI steps with just one command at the command-line, while concise, easy to access answers provid

  18. Assessment of the disinfection capacity and eco-toxicological impact of atmospheric cold plasma for treatment of food industry effluents.

    Science.gov (United States)

    Patange, Apurva; Boehm, Daniela; Giltrap, Michelle; Lu, Peng; Cullen, P J; Bourke, Paula

    2018-08-01

    Generation of wastewater is one of the main environmental sustainability issues across food sector industries. The constituents of food process effluents are often complex and require high energy and processing for regulatory compliance. Wastewater streams are the subject of microbiological and chemical criteria, and can have a significant eco-toxicological impact on the aquatic life. Thus, innovative treatment approaches are required to mitigate environmental impact in an energy efficient manner. Here, dielectric barrier discharge atmospheric cold plasma (ACP) was evaluated for control of key microbial indicators encountered in food industry effluent. This study also investigated the eco-toxicological impact of cold plasma treatment of the effluents using a range of aquatic bioassays. Continuous ACP treatment was applied to synthetic dairy and meat effluents. Microbial inactivation showed treatment time dependence with significant reduction in microbial populations within 120 s, and to undetectable levels after 300 s. Post treatment retention time emerged as critical control parameter which promoted ACP bacterial inactivation efficiency. Moreover, ACP treatment for 20 min achieved significant reduction (≥2 Log 10 ) in Bacillus megaterium endospores in wastewater effluent. Acute aquatic toxicity was assessed using two fish cell lines (PLHC-1 and RTG-2) and a crustacean model (Daphnia magna). Untreated effluents were toxic to the aquatic models, however, plasma treatment limited the toxic effects. Differing sensitivities were observed to ACP treated effluents across the different test bio-assays in the following order: PLHC-1 > RTG-2 ≥ D. magna; with greater sensitivity retained to plasma treated meat effluent than dairy effluent. The toxic effects were dependent on concentration and treatment time of the ACP treated effluent; with 30% cytotoxicity in D. magna and fish cells observed after 24 h of exposure to ACP treated effluent for

  19. Specific methanogenic activity (SMA of industrial sludge from the aerobic and anaerobic biological treatment

    Directory of Open Access Journals (Sweden)

    Danieli Schneiders

    2013-08-01

    Full Text Available In this study, specific methanogenic activity (SMA tests were performed on textile sludge and food industry sludge. The textile sludge from an activated sludge was collected at the entrance of the secondary biologic clarifier and the food sludge was collected in a UASB reactor. Once collected, the sludges were characterized and tested for SMA. It was found that the microrganisms present in the food sludge had SMA of 0.17 gCOD-CH4 gSSV.d-1 and 337.05 mL of methane production, while the microrganisms of the textile sludge presented 0.10 gCOD-CH4 gSSV.d-1 of SMA and 3.04 mL of methane production. Therefore, the food sludge was more suitable to be used as a starting inoculum in UASB.

  20. Experimental and computational investigation of polyacrylonitrile ultrafiltration membrane for industrial oily wastewater treatment

    International Nuclear Information System (INIS)

    Adib Hooman; Hassanajili, Shadi; Sheikhi-Kouhsar, Mohammad Reza; Salahi, Abdolhamid; Mohammadi, Toraj

    2015-01-01

    An experimental study on separation of industrial oil from oily wastewater has been done. A polyacrylonitrile membrane with a molecular weight cut-off (MWCO) of 20 kDa was used and an outlet wastewater of API unit of Tehran refinery was employed. The main purpose of this study was to develop a support vector machine model for permeation flux decline and fouling resistance in a cross-flow hydrophilic polyacrylonitrile membrane during ultrafiltration. The operating conditions which have been applied to develop a support vector machine model were transmembrane pressure (TMP), operating temperature, cross flow velocity (CFV), pH values of oily wastewater, permeation flux decline and fouling resistance. The testing results obtained by the support vector machine models are in very good agreement with experimental data. The calculated squared correlation coefficients for permeation flux decline and fouling resistance were both 0.99. Based on the results, the support vector machine proved to be a reliable accurate estimation method

  1. Recovery of phenol of industrial wastewaters with NaCl treatment

    International Nuclear Information System (INIS)

    Serna, Iveth; Torres, Jesus; Hoyos Bibian

    2003-01-01

    A technique for phenol recovery from residual wastewater, which has been made in an empiric way in some local industries, is explored in this work. It was carried out an experimental design that takes into account the concentration of NaCl as the entrance variable and the phenol recovery percentage as the exit variable. The statistical analysis of data determined that the best operation point is 25 Celsius degrade, with a initial ph between 2 and 3, an initial concentration of 6% and 21,5% for phenol and NaCl respectively, achieving a phenol recovery of 79 % with a phenol concentration in the organic phase of 83%. Besides the experimental part some theories are exposed dealing with the separation of a no electrolyte and water by salt addition

  2. Graphene wrapped Copper Phthalocyanine nanotube: Enhanced photocatalytic activity for industrial waste water treatment

    Science.gov (United States)

    Mukherjee, Moumita; Ghorai, Uttam Kumar; Samanta, Madhupriya; Santra, Angshuman; Das, Gour P.; Chattopadhyay, Kalyan K.

    2017-10-01

    To improve the photocatalytic performance of metal phthalocyanine based catalyst, Copper Phthalocyanine (CuPc) functionalized reduced graphene oxide (RGO) nanocomposite has been synthesized through a simple chemical approach. The obtained product was characterized by X-ray diffraction technique (XRD), Fourier transform infrared (FTIR) spectroscopy, Ultraviolet-visible spectroscopy (UV-vis) and High resolution transmission electron microscopy (HRTEM). The photocatalytic activity of the RGO/CuPc nanocomposite was performed by the degradation of Rhodamine B (RhB) under visible light irradiation. The photocatalytic studies revealed that the RGO/CuPc nanocomposite exhibits much stronger catalytic behavior than the pristine CuPc nanotube. A plausible mechanism for the photodegradation of Rhodamine B (RhB) was suggested. The RGO wrapped CuPc nanotube composite materials offer great potential as active photocatalysts for degradation of organic pollutions in industrial waste water.

  3. In-situ evaluation of the degradable carbon influence for industrial waste water treatment

    Energy Technology Data Exchange (ETDEWEB)

    Fayomi, O. S. I., E-mail: ojo.fayomi@covenantuniversity.edu.ng, E-mail: fayomio@tut.ac.za, E-mail: ojosundayfayomi3@gmail.com [Department of Mechanical Engineering, Covenant University, Ota, Ogun State (Nigeria); Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, P.M.B. X680, Pretoria (South Africa); Olukanni, D. O. [Department of Civil Engineering, Covenant University, P.M.B. 1023, Ota, Ogun State (Nigeria); Fayomi, G. U. [Department of Environmental Management, Centre for Environmental and Science Education, Lagos State University, Ojo, Lagos State (Nigeria); Joseph, O. O. [Department of Mechanical Engineering, Covenant University, Ota, Ogun State (Nigeria); Popoola, A. P. I. [Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, P.M.B. X680, Pretoria (South Africa)

    2016-07-25

    A photochemical investigation and synergetic blend for wastewater purification was carried out. Blends of different peels: Potato-, Apple and Pineapples-peals (PAP-peals) were impregnated with aqueous solutions of ZnCl{sub 2} following the variant of the incipient wetness method for activation of activated carbon (AC). Different concentrations were used to produce impregnation ratios. Activation was carried out in a tube furnace by heating to 700°C with 1 hour soaking time. Scanning Electron Microscopic with attached energy dispersive spectrometer (SEM/EDS), Atomic Adsorption Spectrometry (AAS) and Fourier Transform Infrared spectrometer (FTIS) equipments were used for the characterization of the AC produced. The result shows that PAP-peals derived activated carbons had micro porous characteristics. The study revealed that these new combined adsorbents materials are inexpensive, easily available and they have applications for the removal of Cu, Pb and Cr contained in industrial effluents.

  4. The use of PHP in the radioactive effluent treatment in rare earth industry

    International Nuclear Information System (INIS)

    Shitang, Q.; Ruensheng, W.

    1985-01-01

    Monazite is one of the most important rare earth resources, processing monazite, however, is accompanied by radioactive effluent that needs treatment. A satisfactory treatment should be able not only to insolubilize the radioactive isotopes but also to clarify the suspension quickly and completely. In this study, out of 15 different coagulants, partially hydrolyzed polyacrylamide (PHP) of molecular weight 1000 has been chosen as the most efficient one for the clarification of the treated effluent in question. Satisfactory performance has been attained in a continuous clarifier

  5. CHARACTERIZATION AND ANAEROBIC TREATMENT OF BIOLOGICAL AND PHYSICOCHEMICAL SLUDGE FROM A MOROCCAN DAIRY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Saaida LHANAFI

    2017-04-01

    Full Text Available The physicochemical and biological sludge (PCS and BS from a Moroccan dairy industry, constitute a source of organic matter that is ranging respectively between 58.67 to 90.6% and 18.85 to 92.5%. The composition of these sludges is very specific because they are derived from an effluent mixture (milk, orange, whey, … witch varied according to production of this industry. As results, the physicochemical and microbiological characteristics of these sludges fluctuate according to time. The pH of biological sludge varied between 7.35 to 8.85 while the pH of physicochemical sludge fluctuated between 5.32 to 7.5. In addition the microbial germs is represented by total coliforms (3.95.107 and 2.02.1011UFC.ml-1, total germs (1.61.109 and 2.36.1012 UFC.ml-1, sulphate-reducing bacteria (1.55.108 and 5.72.109 UFC.ml-1, lactobacillus (2.15.108 and 9.37.1011 UFC.ml-1 and streptococcus (1.05.109 and 2.46.1011UFC.ml-1 (respectively for BS and PCS. Assessment of anaerobic digestion for treating these wastes in batch reactor at mesophilic condition (38°C show the promising results in terms of methane production and organic pollution removal. Indeed, the methane yields were 5.601 and 20.79 mlSTP.gVS-1 gave respectively by BS and PCS for the maximal load (100% of substrate which is the optimal load. The total solid and volatile solid reduction reached 79.63 and 83.60% for biological sludge while it reached 87.06% and 89.16% for physicochemical sludge for the same load (100% of sludge.

  6. Professional Windows Embedded Compact 7

    CERN Document Server

    Phung, Samuel; Joubert, Thierry; Hall, Mike

    2011-01-01

    Learn to program an array of customized devices and solutions As a compact, highly efficient, scalable operating system, Windows Embedded Compact 7 (WEC7) is one of the best options for developing a new generation of network-enabled, media-rich, and service-oriented devices. This in-depth resource takes you through the benefits and capabilities of WEC7 so that you can start using this performance development platform today. Divided into several major sections, the book begins with an introduction and then moves on to coverage of OS design, application development, advanced application developm

  7. Windows 2012 Server network security securing your Windows network systems and infrastructure

    CERN Document Server

    Rountree, Derrick

    2013-01-01

    Windows 2012 Server Network Security provides the most in-depth guide to deploying and maintaining a secure Windows network. The book drills down into all the new features of Windows 2012 and provides practical, hands-on methods for securing your Windows systems networks, including: Secure remote access Network vulnerabilities and mitigations DHCP installations configuration MAC filtering DNS server security WINS installation configuration Securing wired and wireless connections Windows personal firewall

  8. Sequencing treatment of industrial wastewater with ultraviolet/H2O2 advanced oxidation and moving bed bioreactor

    Directory of Open Access Journals (Sweden)

    Mohammad Mehdi Mehrabani Ardekani

    2015-01-01

    Full Text Available Aims: The main purpose of this study was to determine the efficiency of a sequencing treatment including ultraviolet (UV/H 2 O 2 oxidation followed by a moving bed bioreactor (MBBR. Materials and Methods: Effect of solution pH, reaction time, and H 2 O 2 concentration were investigated for an industrial wastewater sample. The effluent of the advanced oxidation processes unit was introduced to the MBBR operated for three hydraulic retention times of 4, 8, and 12 h. Results: The optimum condition for industrial wastewater treatment via advanced oxidation was solution pH: 7, H 2 O 2 dose: 1000 mg/L and 90 min reaction time. These conditions led to 74.68% chemical oxygen demand (COD removal and 66.15% biochemical oxygen demand (BOD 5 removal from presedimentation step effluent that initially had COD and BOD 5 contents of 4,400 and 1,950 mg/L, respectively. Conclusion: Combination of UV/H 2 O 2 advanced oxidation with MBBR could result in effluents that meet water quality standards for discharge to receiving waters.

  9. Adapting SimpleTreat for simulating behaviour of chemical substances during industrial sewage treatment

    NARCIS (Netherlands)

    Struijs, J.; van de Meent, D.; Schowanek, D.; Buchholz, H.; Patoux, R.; Wolf, T.; Austin, T.; Tolls, J.; van Leeuwen, K.; Galay-Burgos, M.

    2016-01-01

    The multimedia model SimpleTreat, evaluates the distribution and elimination of chemicals by municipal sewage treatment plants (STP). It is applied in the framework of REACH (Registration, Evaluation, Authorization and Restriction of Chemicals). This article describes an adaptation of this model for

  10. 78 FR 66744 - Draft Guidance for Industry on Pulmonary Tuberculosis: Developing Drugs for Treatment; Availability

    Science.gov (United States)

    2013-11-06

    ...: Developing Drugs for Treatment.'' The purpose of the draft guidance is to assist sponsors in the development...-addressed adhesive label to assist that office in processing your requests. See the SUPPLEMENTARY... Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852. FOR...

  11. Batch test screening of industrial product/byproduct filter materials for agricultural drainage water treatment

    Science.gov (United States)

    Filter treatment may be a viable means for removing the nitrate, phosphate, and pesticides discharged with agricultural drainage waters that cause adverse environmental impacts within the U.S. on local, regional, and national scales. Laboratory batch test screening for agricultural drainage water ...

  12. New Liquid Crystal Smart Window and its Production Process (SmartWin II)

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Kristiansen, Finn Harken; Schultz, Jørgen Munthe

    2005-01-01

    large market potential for this technology. Conception and realisation of a pre-industrial machine for manufacturing smart windows were obtained. By means of this pre-industrial machine, the sample surface area was progressive increased from lab-scale (approx. 10 cm sq.) up to 60 cm x 80 cm at Mid-Term...

  13. Round window stimulation for conductive and mixed hearing loss.

    Science.gov (United States)

    Dillon, Margaret T; Tubbs, Rhonda S; Adunka, Marcia C; King, English R; Hillman, Todd A; Adunka, Oliver F; Chen, Douglas A; Buchman, Craig A

    2014-10-01

    Assess surgical complications, postoperative residual hearing, and speech perception outcomes of placement of a middle ear implant on the round window in conductive and mixed hearing loss cases. Single-subject, repeated-measures design where each subject served as his or her own control. Tertiary referral medical systems. Eighteen subjects with either conductive or mixed hearing loss who could not benefit from conventional amplification were enrolled in a clinical trial investigating vibratory stimulation of the round window. The floating mass transducer (FMT) was positioned in the round window niche. Unaided residual hearing, and aided sound field thresholds and speech perception abilities were evaluated preoperatively, and at 1, 3, 6, and 10 months post-activation of the external speech processor. Six subjects experienced complications that either required further medical management or resolved on their own. There was no difference in residual bone conduction thresholds or unaided word discrimination over time. All subjects experienced a significant improvement in aided speech perception abilities as compared to preoperative performance. Subjects with conductive and mixed hearing loss with placement of the FMT in the round window niche experienced improved sound field thresholds and speech perception, without compromising residual hearing thresholds. Vibratory stimulation of the round window via a middle ear implant may be an appropriate treatment option for patients with conductive and mixed hearing loss. Additional research is needed on the preferred placement of the FMT, improvement of functional gain, and methods to limit postoperative complications and need for revision surgery.

  14. Image annotation under X Windows

    Science.gov (United States)

    Pothier, Steven

    1991-08-01

    A mechanism for attaching graphic and overlay annotation to multiple bits/pixel imagery while providing levels of performance approaching that of native mode graphics systems is presented. This mechanism isolates programming complexity from the application programmer through software encapsulation under the X Window System. It ensures display accuracy throughout operations on the imagery and annotation including zooms, pans, and modifications of the annotation. Trade-offs that affect speed of display, consumption of memory, and system functionality are explored. The use of resource files to tune the display system is discussed. The mechanism makes use of an abstraction consisting of four parts; a graphics overlay, a dithered overlay, an image overly, and a physical display window. Data structures are maintained that retain the distinction between the four parts so that they can be modified independently, providing system flexibility. A unique technique for associating user color preferences with annotation is introduced. An interface that allows interactive modification of the mapping between image value and color is discussed. A procedure that provides for the colorization of imagery on 8-bit display systems using pixel dithering is explained. Finally, the application of annotation mechanisms to various applications is discussed.

  15. Analysis of indirect treatment comparisons in national health technology assessment assessments and requirements for industry submissions.

    Science.gov (United States)

    Es-Skali, Ischa J; Spoors, John

    2018-03-28

    To determine the preferred methodologies of health technology assessment (HTA) agencies across Europe, Canada and Australia to ascertain acceptance of indirect treatment comparisons (ITC) as a source of comparative evidence. A review of official submission guidelines and analysis of comments in HTA submissions that have used different ITC methodologies. ITC is generally accepted as a technique that allows demonstration of noninferiority to a comparator provided the chosen methodology and underlying assumptions are clear and justified. However, HTA agencies are more likely to closely scrutinize submitted data and evaluate statistical significance of results when superiority is claimed. In addition, the HTA agencies in scope tended to be cautious and only accept ITC data as support for similarity of treatments.

  16. Correlative study of scratch and wear behaviour of several surface treatments for uses in nuclear industries

    International Nuclear Information System (INIS)

    Guerout, F.; Zbinden, M.; Lina, A.; Clemendot, F.; Lelait, L.; Van Duysen, J.C.

    1992-06-01

    We have studied the scratch and wear behaviour of seven different surface treatments on an AISI 304L stainless steel substrate. These surface treatments have been elaborated by different processes: physical vapour deposition, ion nitriding, hypersonic projection and electrochemical deposition. The conventional scratch testing results show that the main surface damage feature is brittle cracking at the trailing edge of the indenter, but the cracking loads are broadly the same for all coatings considered here. So, we have carried out constant load scratch testing and analyzed the crack density inside of the track. The correlation between the crack density and the wear resistance, as measured in the GIBUS test, is satisfactory. This result shows the importance of the coating brittleness in the sliding-impact wear process. It is also necessary to adopt more precise and representative criterion for coating brittleness quantification

  17. The influence of domestic and industrial treatment of food on Cs 137 content

    International Nuclear Information System (INIS)

    Lombardi, C.C.; Monte, L.

    1988-01-01

    The environmental contamination due to the Chernobyl accident offers a large amount of data concerning the radioactive contamination of human food-chain. Using those data a research is being carried out to evaluate the behaviour of some radionuclides in food subjected to technological or domestic treatment. In this paper the authors discuss the consequences on the content of Cs-137 a) of domestic cooking of alimentary ''pasta'', b) of wheat milling, c) of milk coagulation to produce cheese

  18. A pharmaceutical industry perspective on the economics of treatments for alcohol and opioid use disorders.

    Science.gov (United States)

    Gastfriend, David R

    2014-10-01

    Individuals with alcohol and/or drug use disorders often fail to receive care, or evidence-based care, yet the literature shows health economic benefits. Comparative effectiveness research is emerging that examines approved approaches in terms of real, total healthcare cost/utilization. Comprehensive retrospective insurance claims analyses are few but tend to be nationally distributed and large. The emerging pattern is that, while treatment in general is cost effective, specific therapeutics can yield different health economic outcomes. Cost/utilization data consistently show greater savings with pharmacotherapies (despite their costs) versus psychosocial treatment alone. All FDA-approved addiction pharmacotherapies (oral naltrexone, extended-release naltrexone, acamprosate, disulfiram, buprenorphine, buprenorphine/naloxone, and methadone) are intended for use in conjunction with psychosocial management, not as stand-alone therapeutics; hence, pharmacotherapy costs must offer benefits in addition to abstinence alone or psychological therapy. Patient persistence is problematic, and (despite its cost) extended-release pharmacotherapy may be associated with lower or no greater total healthcare cost, mostly due to reduced hospitalization. The reviewed studies use rigorous case-mix adjustment to balance treatment cohorts but lack the randomization that clinical trials use to protect against confounding. Unlike trials, however, these studies can offer generalizability to diverse populations, providers, and payment models--and are of particular salience to payers. © 2014 Alkermes, Inc. Annals of the New York Academy of Sciences published by Wiley Periodicals Inc. on behalf of The New York Academy of Sciences.

  19. Treatment of used machine and industrial mineral oil in Republic of Serbia under the sanctions

    International Nuclear Information System (INIS)

    Stankovic, D.

    2002-01-01

    In this paper we present the only system of collection and recycling of used oil in Serbia, developed by NIS - Refinery, Belgrade. In addition to the discussion about the environmental dangers of used machine oil, we present the advantages of organized collection and its reuse. Our analysis shows steady decline of the collected amount of used oil during the period of economical sanctions. The amount collected by Jugopetrol, NAP and Beopetrol was drastically reduced in 1999 (35%) and 2000 (75%) with respect to 1995 (43%). The Yugoslav Army increased the percentage of collected used oil in the total amount collected from 23% to 33% in 1999 to 53% in 2000. Automechanical services did not participate in the collection of used oil in the last three years. Having all this in mind we might ask ourselves what happened to the used oil that was not collected? We also point out the advantages and disadvantages of the system for collection and recycling in the conditions of ten years of economical sanctions, including old equipment and technology, regulations, price politics and difficult economical conditions. We discuss the reasons for the decline of the collected amount of used oil. The ecological problems of misuse of used oil will only increase, having in mind industrialization and the increase in the number of cars. The solution lies in the introduction of state regulations that will require and reinforce collection and recycling of used oil. (author)

  20. Mullite ceramic membranes for industrial oily wastewater treatment: experimental and neural network modeling.

    Science.gov (United States)

    Shokrkar, H; Salahi, A; Kasiri, N; Mohammadi, T

    2011-01-01

    In this paper, results of an experimental and modeling of separation of oil from industrial oily wastewaters (desalter unit effluent of Seraje, Ghom gas wells, Iran) with mullite ceramic membranes are presented. Mullite microfiltration symmetric membranes were synthesized from kaolin clay and alpha-alumina powder. The results show that the mullite ceramic membrane has a high total organic carbon and chemical oxygen demand rejection (94 and 89%, respectively), a low fouling resistance (30%) and a high final permeation flux (75 L/m2 h). Also, an artificial neural network, a predictive tool for tracking the inputs and outputs of a non-linear problem, is used to model the permeation flux decline during microfiltration of oily wastewater. The aim was to predict the permeation flux as a function of feed temperature, trans-membrane pressure, cross-flow velocity, oil concentration and filtration time, using a feed-forward neural network. Finally the structure of hidden layers and nodes in each layer with minimum error were reported leading to a 4-15 structure which demonstrated good agreement with the experimental measurements with an average error of less than 2%.