WorldWideScience

Sample records for wind erosion model

  1. Wind erosion modelling in a Sahelian environment

    NARCIS (Netherlands)

    Faye-Visser, S.M.; Sterk, G.; Karssenberg, D.

    2005-01-01

    In the Sahel field observations of wind-blown mass transport often show considerable spatial variation related to the spatial variation of the wind erosion controlling parameters, e.g. soil crust and vegetation cover. A model, used to predict spatial variation in wind erosion and deposition is a

  2. Development of an Integrated Water and Wind Erosion Model

    Science.gov (United States)

    Flanagan, D. C.; Ascough, J. C.; Wagner, L. E.; Geter, W. F.

    2006-12-01

    Prediction technologies for soil erosion by the forces of wind or water have largely been developed independently from one another, especially within the United States. Much of this has been due to the initial creation of equations and models which were empirical in nature (i.e., Universal Soil Loss Equation, Wind Erosion Equation) and based upon separate water erosion or wind erosion plot and field measurements. Additionally, institutional organizations in place typically divided research efforts and funding to unique wind or water erosion research and modeling projects. However, during the past 20 years computer technologies and erosion modeling have progressed to the point where it is now possible to merge physical process-based computer simulation models into an integrated water and wind erosion prediction system. In a physically- based model, many of the processes which must be simulated for wind and water erosion computations are the same, e.g., climate, water balance, runoff, plant growth, etc. Model components which specifically deal with the wind or water detachment, transport and deposition processes are those that must differ, as well as any necessary parameterization of input variables (e.g., adjusted soil erodibilities, critical shear stresses, etc.) for those components. This presentation describes current efforts towards development of a combined wind and water erosion model, based in part upon technologies present in the Water Erosion Prediction Project (WEPP) and the Wind Erosion Prediction System (WEPS) models. Initial efforts during the past two years have resulted in modular modeling components that allow for prediction of infiltration, surface runoff, and water erosion at a hillslope scale within an Object Modeling System. Additional components currently in development include wind detachment at a single field point, continuous water balance, and unified plant growth. Challenges in this project are many, and include adequate field

  3. A Multidirectional Wind Erosion Model for Western Saxony

    Science.gov (United States)

    Schmidt, Simon; Meusburger, Katrin; de Figueiredo, Tomás; Alewell, Christine

    2016-04-01

    Wind erosion can trigger a non-visible loss of fine soil up to 40 t ha-1 per single event and is as such a major soil threat and environmental concern in areas susceptible to wind erosion. Western Saxony was assessed to be among the most susceptible landscapes not only within Germany but even within Europe (Borelli et al., 2015; Borelli et al., 2014). Moreover, wind erosion events in eastern Germany cause very severe off-site effects with impacts on road traffic. So far the wind erosion model that is normally applied in Germany is based on the norm DIN standard 19706. The DIN standard 19706 was revised by new controlling factors and fuzzy logic to consider the multi-directionality of wind and make it more realistic to wind erosion processes. The new factors are based on different datasets like (i) wind and temperature data (1hr resolution) for 9 gauging stations and interpolated long-term wind speed (1981-2000, 200m resolution) provided by the German Weather Service, (ii) soil erodibility extracted from the digital soil map 1:50,000, (iii) landscape components from different data sources (ATKIS, OpenStreetMap and others), and (iv) a DEM (20m resolution) for local orographic modeling. For a risky sub-region, local wind speeds and directions were modelled based on the Wind Atlas Analysis and Application Programs (WAsP) orography-model to assess road bodies for priority actions. Major improvements of the proposed model are the consideration of changing wind directions and the implementation of factors on soil cover and field length. An estimation of the long-term spatiotemporal variability under changing climate is possible with the model conception. The revised model assesses 3.6% of western Saxonies agricultural fields under very high risk to wind erosion. Larger fields (greater than 116 ha) are connected to a higher frequency (51.7%) of very high risk. Only a small proportion (5.2%) of the high risk class was found in small fields (smaller than 21 ha). Fields under

  4. Scaling up from field to region for wind erosion prediction using a field-scale wind erosion model and GIS

    Science.gov (United States)

    Zobeck, T.M.; Parker, N.C.; Haskell, S.; Guoding, K.

    2000-01-01

    Factors that affect wind erosion such as surface vegetative and other cover, soil properties and surface roughness usually change spatially and temporally at the field-scale to produce important field-scale variations in wind erosion. Accurate estimation of wind erosion when scaling up from fields to regions, while maintaining meaningful field-scale process details, remains a challenge. The objectives of this study were to evaluate the feasibility of using a field-scale wind erosion model with a geographic information system (GIS) to scale up to regional levels and to quantify the differences in wind erosion estimates produced by different scales of soil mapping used as a data layer in the model. A GIS was used in combination with the revised wind erosion equation (RWEQ), a field-scale wind erosion model, to estimate wind erosion for two 50 km2 areas. Landsat Thematic Mapper satellite imagery from 1993 with 30 m resolution was used as a base map. The GIS database layers included land use, soils, and other features such as roads. The major land use was agricultural fields. Data on 1993 crop management for selected fields of each crop type were collected from local government agency offices and used to 'train' the computer to classify land areas by crop and type of irrigation (agroecosystem) using commercially available software. The land area of the agricultural land uses was overestimated by 6.5% in one region (Lubbock County, TX, USA) and underestimated by about 21% in an adjacent region (Terry County, TX, USA). The total estimated wind erosion potential for Terry County was about four times that estimated for adjacent Lubbock County. The difference in potential erosion among the counties was attributed to regional differences in surface soil texture. In a comparison of different soil map scales in Terry County, the generalised soil map had over 20% more of the land area and over 15% greater erosion potential in loamy sand soils than did the detailed soil map. As

  5. Using albedo to reform wind erosion modelling, mapping and monitoring

    Science.gov (United States)

    Chappell, Adrian; Webb, Nicholas P.

    2016-12-01

    Wind erosion and dust emission models are used to assess the impacts of dust on radiative forcing in the atmosphere, cloud formation, nutrient fertilisation and human health. The models are underpinned by a two-dimensional geometric property (lateral cover; L) used to characterise the three-dimensional aerodynamic roughness (sheltered area or wakes) of the Earth's surface and calibrate the momentum it extracts from the wind. We reveal a fundamental weakness in L and demonstrate that values are an order of magnitude too small and significant aerodynamic interactions between roughness elements and their sheltered areas have been omitted, particularly under sparse surface roughness. We describe a solution which develops published work to establish a relation between sheltered area and the proportion of shadow over a given area; the inverse of direct beam directional hemispherical reflectance (black sky albedo; BSA). We show direct relations between shadow and wind tunnel measurements and thereby provide direct calibrations of key aerodynamic properties. Estimation of the aerodynamic parameters from albedo enables wind erosion assessments over areas, across platforms from the field to airborne and readily available satellite data. Our new approach demonstrated redundancy in existing wind erosion models and thereby reduced model complexity and improved fidelity. We found that the use of albedo enabled an adequate description of aerodynamic sheltering to characterise fluid dynamics and predict sediment transport without the use of a drag partition scheme (Rt) or threshold friction velocity (u∗t). We applied the calibrations to produce global maps of aerodynamic properties which showed very similar spatial patterns to each other and confirmed the redundancy in the traditional parameters of wind erosion modelling. We evaluated temporal patterns of predicted horizontal mass flux at locations across Australia which revealed variation between land cover types that would not

  6. Modelling of environmental and climatic problems: Wind and water erosion

    International Nuclear Information System (INIS)

    Aslan, Z.

    2004-01-01

    Magnitude of wind and water erosion mainly depend on wind velocity, rainfall rate, slope and soil characteristics. The main purpose of this lecture is to define the role of small, meso and large scale phenomena (local and synoptic fluctuations) on water and wind erosion. These lecture notes present some results on wind speed simulation and seasonal fluctuations of water deficit for the selected station in different erosion risque and transition regions of Turkey. (author)

  7. Wind erosion in semiarid landscapes: Predictive models and remote sensing methods for the influence of vegetation

    Science.gov (United States)

    Musick, H. Brad

    1993-01-01

    The objectives of this research are: to develop and test predictive relations for the quantitative influence of vegetation canopy structure on wind erosion of semiarid rangeland soils, and to develop remote sensing methods for measuring the canopy structural parameters that determine sheltering against wind erosion. The influence of canopy structure on wind erosion will be investigated by means of wind-tunnel and field experiments using structural variables identified by the wind-tunnel and field experiments using model roughness elements to simulate plant canopies. The canopy structural variables identified by the wind-tunnel and field experiments as important in determining vegetative sheltering against wind erosion will then be measured at a number of naturally vegetated field sites and compared with estimates of these variables derived from analysis of remotely sensed data.

  8. A history of wind erosion prediction models in the United States Department of Agriculture: The Wind Erosion Prediction System (WEPS)

    Science.gov (United States)

    Development of the Wind Erosion Prediction System (WEPS) was officially inaugurated in 1985 by United States Department of Agriculture-Agricultural Research Service (USDA-ARS) scientists in response to customer requests, particularly those coming from the USDA Soil Conservation Service (SCS), for im...

  9. Wind erosion model of a multiple sized particles bed

    Energy Technology Data Exchange (ETDEWEB)

    Descamps, I.; Pons, A.; Harion, J.-L. [IMP-CNRS UPR 8521, Perpignan (France)

    2006-07-01

    A model has been developed in order to predict more accurately fugitive dust emissions by aeolian erosion on industrial sites. This model takes into account the time evolution of the bed surface features during erosion by a turbulent flow. It consists of four parts corresponding to aerodynamic entrainment and is based on the interaction between particle take-off and wall turbulence. A take-off criterion compares the lift force exerted by the flow on the particle with the sum of the weight and adhesive force. Bed pavement and saltation are also taken into account. Bed pavement is induced by the non-erodible particles. On steel plants stockpiles, ores and coals have granulometric spectra going a few microns to a few centimetres in diameter. In fact, the non-erodible particles, that cannot take-off because of their inertia, form obstacles in the finer particle take-off and lead to a time decrease in emitted mass flux. The new model has been tested for the case of a bimodal size distribution by comparison with relevant experimental data. The results demonstrate that the mode allows predicting the mass flux time decrease due to non-erodible particles. 17 refs., 6 figs.

  10. Literature review of models for estimating soil erosion and deposition from wind stresses on uranium-mill-tailings covers

    Energy Technology Data Exchange (ETDEWEB)

    Bander, T.J.

    1982-11-01

    Pacific Northwest Laboratory (PNL) is investigating the use of a rock armoring blanket (riprap) to mitigate wind and water erosion of an earthen radon-suppression cover applied to uranium-mill tailings. The mechanics of wind erosion, as well as of soil deposition, are discussed in this report. Several wind erosion models are reviewed to determine if they can be used to estimate the erosion of soil from a mill-tailings cover. One model, developed by W.S. Chepil, contains the most-important factors that describe variables that influence wind erosion. Particular features of other models are also discussed, as well as the application of Chepil's model to a particular tailings pile. For this particular tailings pile, the estimated erosion was almost one inch per year for an unprotected tailings soil surface. Wide variability in the deposition velocity and lack of adequate deposition models preclude reliable estimates of the rate at which airborne particles are deposited.

  11. Literature review of models for estimating soil erosion and deposition from wind stresses on uranium-mill-tailings covers

    International Nuclear Information System (INIS)

    Bander, T.J.

    1982-11-01

    Pacific Northwest Laboratory (PNL) is investigating the use of a rock armoring blanket (riprap) to mitigate wind and water erosion of an earthen radon-suppression cover applied to uranium-mill tailings. The mechanics of wind erosion, as well as of soil deposition, are discussed in this report. Several wind erosion models are reviewed to determine if they can be used to estimate the erosion of soil from a mill-tailings cover. One model, developed by W.S. Chepil, contains the most-important factors that describe variables that influence wind erosion. Particular features of other models are also discussed, as well as the application of Chepil's model to a particular tailings pile. For this particular tailings pile, the estimated erosion was almost one inch per year for an unprotected tailings soil surface. Wide variability in the deposition velocity and lack of adequate deposition models preclude reliable estimates of the rate at which airborne particles are deposited

  12. Wind erosion in the Sahelian zone of Niger : processes, models, and control techniques

    NARCIS (Netherlands)

    Sterk, G.

    1997-01-01

    In the Sahelian zone of Niger, severe wind erosion occurs mainly in the first half of the rainy season (May - July), when violent winds preceding thunderstorms result in intense sediment transport. Quantification of this wind erosion is difficult due to a high degree of temporal and spatial

  13. New Insights into the Geography and Modelling of Wind Erosion in the European Agricultural Land. Application of a Spatially Explicit Indicator of Land Susceptibility to Wind Erosion

    Directory of Open Access Journals (Sweden)

    Pasquale Borrelli

    2015-07-01

    Full Text Available The current state of the art in erosion research does not provide answers about the “where” and “when” of wind erosion in European agricultural lands. Questions about the implications for the agricultural productivity remain unanswered. Tackling this research gap, the study provides a more comprehensive understanding of the spatial patterns of land susceptibility to wind erosion in European agricultural lands. The Index of Land Susceptibility to Wind Erosion (ILSWE was applied in a GIS environment. A harmonized input dataset ranked following a fuzzy logic technique was employed. Within the 36 European countries under investigation, moderate (17.3 million ha and high levels (8.8 million ha of land susceptibility to wind erosion were predicted. This corresponds to 8.0% and 4.1% of total agricultural land, respectively.

  14. Using state-and-transition models to evaluate impacts of land cover change on wind erosion

    Science.gov (United States)

    Wind erosion of rangeland soils is a global problem exacerbated by land cover change. Despite efforts to quantify the impacts of land cover change on wind erosion, assessment uncertainty remains large. We address this uncertainty by evaluating the application of ecological sites and state-and-transi...

  15. Using albedo to reform wind erosion modelling, mapping and monitoring

    Science.gov (United States)

    Dust emission models are used to assess the impacts of dust on radiative forcing in the atmosphere, cloud formation, nutrient fertilisation and human health. We describe a need in aeolian research to adequately represent the spatial variability and particularly the area average of the key aerodynami...

  16. Wind erosion of soils burned by wildfire

    Science.gov (United States)

    N. S. Wagenbrenner; M. J. Germino; B. K. Lamb; R. B. Foltz; P. R. Robichaud

    2011-01-01

    Wind erosion and aeolian transport processes are largely unstudied in the post-wildfire environment, but recent studies have shown that wind erosion can play a major role in burned landscapes. A wind erosion monitoring system was installed immediately following a wildfire in southeastern Idaho, USA to measure wind erosion from the burned area (Figure 1). This paper...

  17. Leading edge erosion of coated wind turbine blades: Review of coating life models

    NARCIS (Netherlands)

    Slot, H.M.; Gelinck, E.R.M.; Rentrop, A.; van der Heide, Emile

    2015-01-01

    Erosion of the leading edge of wind turbine blades by droplet impingement wear, reduces blade aerodynamic efficiency and power output. Eventually, it compromises the integrity of blade surfaces. Elastomeric coatings are currently used for erosion resistance, yet the life of such coatings cannot be

  18. Modelling nutrient losses by wind and water erosion in northern Burkina Faso

    NARCIS (Netherlands)

    Visser, S.M.

    2004-01-01

    In the semi-arid environment of northern Burkina Faso the processes of wind and water erosion occur almost simultaneously and may cause severe soil degradation. Especially in the early rainy season when soils are bare and unprotected, violent winds preceding intense rainfall events result in intense

  19. Assessment of future scenarios for wind erosion sensitivity changes based on ALADIN and REMO regional climate model simulation data

    Directory of Open Access Journals (Sweden)

    Mezősi Gábor

    2016-07-01

    Full Text Available The changes in rate and pattern of wind erosion sensitivity due to climate change were investigated for 2021–2050 and 2071–2100 compared to the reference period (1961–1990 in Hungary. The sensitivities of the main influencing factors (soil texture, vegetation cover and climate factor were evaluated by fuzzy method and a combined wind erosion sensitivity map was compiled. The climate factor, as the driving factor of the changes, was assessed based on observed data for the reference period, while REMO and ALADIN regional climate model simulation data for the future periods. The changes in wind erosion sensitivity were evaluated on potentially affected agricultural land use types, and hot spot areas were allocated. Based on the results, 5–6% of the total agricultural areas were high sensitive areas in the reference period. In the 21st century slight or moderate changes of wind erosion sensitivity can be expected, and mostly ‘pastures’, ‘complex cultivation patterns’, and ‘land principally occupied by agriculture with significant areas of natural vegetation’ are affected. The applied combination of multi-indicator approach and fuzzy analysis provides novelty in the field of land sensitivity assessment. The method is suitable for regional scale analysis of wind erosion sensitivity changes and supports regional planning by allocating priority areas where changes in agro-technics or land use have to be considered.

  20. A history of wind erosion prediction models in the United States Department of Agriculture Prior to the Wind Erosion Prediction System

    Science.gov (United States)

    The Great Plains experienced an influx of settlers in the late 1850s to 1900. Periodic drought was hard on both settlers and the soil and caused severe wind erosion. The period known as the Dirty Thirties, 1931 to 1939, produced many severe windstorms, and the resulting dusty sky over Washington, D....

  1. A modeling study of aeolian erosion enhanced by surface wind confluences over Mexico City

    Science.gov (United States)

    Using erosion and air quality models, a study on the effect of PM10 episodes in Mexico City is presented. The important contribution of Aeolian erosion on urban air quality, its genesis, morphology, location and regional implications such as the role played by surface confluences, the dry Lake of T...

  2. Soil cover and wind erosion

    Energy Technology Data Exchange (ETDEWEB)

    Fryrear, D.W.

    Wind erosion on agricultural lands can be reduced if the soil surface is protected with crop residues. In evaluating the influence of residues on wind erosion, previous research has expressed residues of various crops as an equivalent of flat, small grain. This becomes difficult as the density of the residue changes with weathering, or as crops other than the major cultivated crops are grown. Soil losses due to wind erosion were determined by covering various percentages of the soil surface with simulated flat residues (wood dowels 3.1 to 25.4 mm in diameter). Covering 20% of the soil surface reduced soil losses 57%, and a 50% cover reduced soil losses 95%. The expression SLR = 1.81 e/sup x/ where x = /sup -0.072% SC/ describes the relationship between soil loss ratio (SLR) and percent soil cover (% SC) with a correlation coefficient of -0.94 (soil cover limits 8 to 80%). The cover can be any nonerodible material such as large clods, gravel, cotton gin trash, or any diameter stick between 3.1 and 25.4 mm. Percent soil cover is easily measured in the field or can be estimated with a minimum of training and experience.

  3. [Estimation of the effect derived from wind erosion of soil and dust emission in Tianjin suburbs on the central district based on WEPS model].

    Science.gov (United States)

    Chen, Li; Han, Ting-Ting; Li, Tao; Ji, Ya-Qin; Bai, Zhi-Peng; Wang, Bin

    2012-07-01

    Due to the lack of a prediction model for current wind erosion in China and the slow development for such models, this study aims to predict the wind erosion of soil and the dust emission and develop a prediction model for wind erosion in Tianjin by investigating the structure, parameter systems and the relationships among the parameter systems of the prediction models for wind erosion in typical areas, using the U.S. wind erosion prediction system (WEPS) as reference. Based on the remote sensing technique and the test data, a parameter system was established for the prediction model of wind erosion and dust emission, and a model was developed that was suitable for the prediction of wind erosion and dust emission in Tianjin. Tianjin was divided into 11 080 blocks with a resolution of 1 x 1 km2, among which 7 778 dust emitting blocks were selected. The parameters of the blocks were localized, including longitude, latitude, elevation and direction, etc.. The database files of blocks were localized, including wind file, climate file, soil file and management file. The weps. run file was edited. Based on Microsoft Visualstudio 2008, secondary development was done using C + + language, and the dust fluxes of 7 778 blocks were estimated, including creep and saltation fluxes, suspension fluxes and PM10 fluxes. Based on the parameters of wind tunnel experiments in Inner Mongolia, the soil measurement data and climate data in suburbs of Tianjin, the wind erosion module, wind erosion fluxes, dust emission release modulus and dust release fluxes were calculated for the four seasons and the whole year in suburbs of Tianjin. In 2009, the total creep and saltation fluxes, suspension fluxes and PM10 fluxes in the suburbs of Tianjin were 2.54 x 10(6) t, 1.25 x 10(7) t and 9.04 x 10(5) t, respectively, among which, the parts pointing to the central district were 5.61 x 10(5) t, 2.89 x 10(6) t and 2.03 x 10(5) t, respectively.

  4. Application of a modeling approach to designate soil and soil organic carbon loss to wind erosion on long-term monitoring sites (BDF) in Northern Germany

    Science.gov (United States)

    Nerger, Rainer; Funk, Roger; Cordsen, Eckhard; Fohrer, Nicola

    2017-04-01

    Soil organic carbon (SOC) loss is a serious problem in maize monoculture areas of Northern Germany. Sites of the soil monitoring network (SMN) "Boden-Dauerbeobachtung" show long-term soil and SOC losses, which cannot be explained by conventional SOC balances nor by other non-Aeolian causes. Using a process-based model, the main objective was to determine whether these losses can be explained by wind erosion. In the long-term context of 10 years, wind erosion was not measured directly but often observed. A suitable estimation approach linked high-quality soil/farming monitoring data with wind erosion modeling results. The model SWEEP, validated for German sandy soils, was selected using 10-minute wind speed data. Two similar local SMN study sites were compared, however, site A was characterized by high SOC loss and often affected by wind erosion, while the reference site B was not. At site A soil mass and SOC stock decreased by 49.4 and 2.44 kg m-2 from 1999 to 2009. Using SWEEP, a total soil loss of 48.9 kg m-2 resulted for 16 erosion events (max. single event 12.6 kg m-2). A share of 78% was transported by suspension with a SOC enrichment ratio (ER) of 2.96 (saltation ER 0.98), comparable to the literature. At the reference site measured and modeled topsoil losses were minimal. The good agreement between monitoring and modeling results suggested that wind erosion caused significant long-term soil and SOC losses. The approach uses results of prior studies and is applicable to similar well-studied sites without other noteworthy SOC losses.

  5. The prevention of wind erosion in agriculture

    NARCIS (Netherlands)

    Zaslavsky, D.

    1977-01-01

    The wind erosion is a problem over more than 80 000 hectares in the Netherlands. The damage in wind erodible areas is on the average at least 150 Dfl. per hectare per year. A lot of damages very probably pass unobserved or unreported.

  6. Mechanics of Interrill Erosion with Wind-Driven Rain (WDR)

    Science.gov (United States)

    This article provides an evaluation analysis for the performance of the interrill component of the Water Erosion Prediction Project (WEPP) model for Wind-Driven Rain (WDR) events. The interrill delivery rates (Di) were collected in the wind tunnel rainfall simulator facility of the International Cen...

  7. Mechanics of interrill erosion with wind-driven rain

    Science.gov (United States)

    The vector physics of wind-driven rain (WDR) differs from that of wind-free rain, and the interrill soil detachment equations in the Water Erosion Prediction Project (WEPP) model were not originally developed to deal with this phenomenon. This article provides an evaluation of the performance of the...

  8. Effects of tailing dam profiles on relative wind erosion rates

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, P.S.; Scott, W.D.; Summers, K.J.

    Erosion from mine treatment and associated residue areas can pose a significant environmental problem for surrounding locations from dust and other transported materials. The shape of such residue areas can influence windfield behavior by causing significant wind speed increases. Residue areas are often unprotected so that increasing the speed of wind passing over these areas will cause extra erosion. Values of wind speed-up predicted by an empirical model for wind flow over hills of low slope were compared with measured values over approach slopes to a tailings dam. Hunt's model used in this study relates wind speed from a point on the hill to that observed if there was no hill. Measured values are in agreement with those predicted by the model. Shear stress values calculated from the wind flow model are then used to determine the friction velocity which, in turn, predict the relative rates of erosion. This prediction is based on the cubic relation between the friction velocity and erosion rate observed by Bagnold. These calculations are repeated for the various possible hill shapes allowed by the plant layout and the need to integrate long term spoil heaps with existing topography. A strategy for minimizing erosion of mine tailings through shape selection can then form part of the environmental considerations associated with tailings dams.

  9. The National Wind Erosion Research Network: Building a standardized long-term data resource for aeolian research, modeling and land management

    Science.gov (United States)

    Webb, Nicholas P.; Herrick, Jeffrey E.; Van Zee, Justin W; Courtright, Ericha M; Hugenholtz, Ted M; Zobeck, Ted M; Okin, Gregory S.; Barchyn, Thomas E; Billings, Benjamin J; Boyd, Robert A.; Clingan, Scott D; Cooper, Brad F; Duniway, Michael C.; Derner, Justin D.; Fox, Fred A; Havstad, Kris M.; Heilman, Philip; LaPlante, Valerie; Ludwig, Noel A; Metz, Loretta J; Nearing, Mark A; Norfleet, M Lee; Pierson, Frederick B; Sanderson, Matt A; Sharrat, Brenton S; Steiner, Jean L; Tatarko, John; Tedela, Negussie H; Todelo, David; Unnasch, Robert S; Van Pelt, R Scott; Wagner, Larry

    2016-01-01

    The National Wind Erosion Research Network was established in 2014 as a collaborative effort led by the United States Department of Agriculture’s Agricultural Research Service and Natural Resources Conservation Service, and the United States Department of the Interior’s Bureau of Land Management, to address the need for a long-term research program to meet critical challenges in wind erosion research and management in the United States. The Network has three aims: (1) provide data to support understanding of basic aeolian processes across land use types, land cover types, and management practices, (2) support development and application of models to assess wind erosion and dust emission and their impacts on human and environmental systems, and (3) encourage collaboration among the aeolian research community and resource managers for the transfer of wind erosion technologies. The Network currently consists of thirteen intensively instrumented sites providing measurements of aeolian sediment transport rates, meteorological conditions, and soil and vegetation properties that influence wind erosion. Network sites are located across rangelands, croplands, and deserts of the western US. In support of Network activities, http://winderosionnetwork.org was developed as a portal for information about the Network, providing site descriptions, measurement protocols, and data visualization tools to facilitate collaboration with scientists and managers interested in the Network and accessing Network products. The Network provides a mechanism for engaging national and international partners in a wind erosion research program that addresses the need for improved understanding and prediction of aeolian processes across complex and diverse land use types and management practices.

  10. Estimation of wind erosion from construction of a railway in arid northwest China

    Science.gov (United States)

    A state-of-the-art wind erosion simulation model, the Wind Erosion Prediction System and the United States Environmental Protection Agency’s AP-42 emission factors formula, were combined together to evaluate wind-blown dust emissions from various construction units from a railway construction projec...

  11. On the geoethical implications of wind erosion

    Science.gov (United States)

    Károly, Tatárvári

    2016-04-01

    Human activities exerts an ever growing impact on our environment, and this is undeniably the responsibility of mankind. In spite of this fact there is almost no process in our environment that can be described exactly with complete exactness, and the working of which is known in full extent. Wind erosion is such a process. Although water erosion is mentioned ever more often in scientific circles as a from of erosion, its effect is restrained to a certain region, although it may cause perceptibly damage of a greater extent in short time. Wind erosion, apart from the fact that it may have global impact, may play an important role in the warming of our climate according to recent studies. First of all, wind erosion may cause damage far from its origin in human health, nutrition, or in the environment in general. Today several surveys have proved, that erosion caused by wind significantly contributes to the air pollution of cities, the fine dust carried as drift by the wind may cause severe environmental damage in accumulation zones. Microbes, toxic material may attach themselves to the dust carried this way and carried on and by the wings of the wind they may cause health issues in humans animals and plants as well. In spite of these facts there are almost no measures against wind erosion employed in arable land, although our ever doughtier climate and changes would make these necessary. Reduction of organic matter content presents a great problem in a large part of cultivated land, so the risk of the production of high quality food raises questions of more and more ethical nature. Who is responsible? The fact, that the chemicals used in a growing extent by agriculture may reach many people causing considerable damage to the environment also raises serious ethical questions. More and more periods with extreme weather conditions are experienced in Hungary and Europe as the effect of climate change. Drought periods are longer and more frequent as the intensity of

  12. Wind and water erosion control on semiarid lands

    International Nuclear Information System (INIS)

    Siddoway, F.H.

    1980-01-01

    Commercial crop production on semiarid lands is difficult because insufficient water is often present to manage the system effectively. Erosion control presents the major management problem. The factors contributing to wind erosion and their interaction have been quantified into a wind erosion equation. The control of wind erosion through agronomic alteration of the various factors is discussed. The quantification and control of water erosion is also discussed with respect to the Universal Soil Loss Equation. Radioisotopes tracers have been used in conjunction with these erosion equations to measure soil losses. (author)

  13. Soil deflation analyses from wind erosion events

    Directory of Open Access Journals (Sweden)

    Lenka Lackóová

    2015-09-01

    Full Text Available There are various methods to assess soil erodibility for wind erosion. This paper focuses on aggregate analysis by a laser particle sizer ANALYSETTE 22 (FRITSCH GmbH, made to determine the size distribution of soil particles detached by wind (deflated particles. Ten soil samples, trapped along the same length of the erosion surface (150–155 m but at different wind speeds, were analysed. The soil was sampled from a flat, smooth area without vegetation cover or soil crust, not affected by the impact of windbreaks or other barriers, from a depth of maximum 2.5 cm. Prior to analysis the samples were prepared according to the relevant specifications. An experiment was also conducted using a device that enables characterisation of the vertical movement of the deflated material. The trapped samples showed no differences in particle size and the proportions of size fractions at different hourly average wind speeds. It was observed that most of particles travelling in saltation mode (size 50–500 μm – 58–70% – moved vertically up to 26 cm above the soil surface. At greater heights, particles moving in suspension mode (floating in the air; size < 100 μm accounted for up to 90% of the samples. This result suggests that the boundary between the two modes of the vertical movement of deflated soil particles lies at about 25 cm above the soil surface.

  14. Dust Plume Modeling at Fort Bliss: Move-Out Operations, Combat Training and Wind Erosion

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, Elaine G.; Rishel, Jeremy P.; Rutz, Frederick C.; Seiple, Timothy E.; Newsom, Rob K.; Allwine, K Jerry

    2006-09-29

    The potential for air-quality impacts from heavy mechanized vehicles operating in the training ranges and on the unpaved main supply routes at Fort Bliss was investigated. This report details efforts by the staff of Pacific Northwest National Laboratory for the Fort Bliss Directorate of Environment in this investigation. Dust emission and dispersion from typical activities, including move outs and combat training, occurring on the installation were simulated using the atmospheric modeling system DUSTRAN. Major assumptions associated with designing specific modeling scenarios are summarized, and results from the simulations are presented.

  15. Model for the accumulation of solar wind radiation damage effects in lunar dust grains, based on recent results concerning implantation and erosion effects

    Energy Technology Data Exchange (ETDEWEB)

    Borg, J.; Bibring, J.P.; Cowsik, G.; Langevin, Y.; Maurette, M.

    1983-02-15

    In this paper we present our most recent results on ion implantation and erosion effects, intended to reproduce the superficial amorphous layers of radiation damage observed with a high voltage electron microscope on ..mu..m-sized grains extracted from the lunar regolith and which result from the exposure of the grains to the solar wind. We next outline theoretical computations which yield the thickness distribution of such amorphous layers as a function of the exposure time of the grains at the surface of the moon, the He/H ratio, and the speed distribution in the solar wind. From this model, the position of the peak in the solar wind speed distribution is the major parameter controlling the thickness of the amorphous layer.

  16. Soil erosion rates caused by wind and saltating sand stresses in a wind tunnel

    International Nuclear Information System (INIS)

    Ligotke, M.W.

    1993-02-01

    Wind erosion tests were performed in a wind tunnel in support of the development of long-term protective barriers to cap stabilized waste sites at the Hanford Site. Controlled wind and saltating sand erosive stresses were applied to physical models of barrier surface layers to simulate worst-case eolian erosive stresses. The goal of these tests was to provide information useful to the design and evaluation of the surface layer composition of an arid-region waste site barrier concept that incorporates a deep fine-soil reservoir. A surface layer composition is needed that will form an armor resistant to eolian erosion during periods of extreme dry climatic conditions, especially when such conditions result in the elimination or reduction of vegetation by water deprivation or wildfire. Because of the life span required of Hanford waste barriers, it is important that additional work follow these wind tunnel studies. A modeling effort is planned to aid the interpretation of test results with respect to the suitability of pea gravel to protect the finite-soil reservoir during long periods of climatic stress. It is additionally recommended that wind tunnel tests be continued and field data be obtained at prototype or actual barrier sites. Results wig contribute to barrier design efforts and provide confidence in the design of long-term waste site caps for and regions

  17. Soil erosion rates caused by wind and saltating sand stresses in a wind tunnel

    Energy Technology Data Exchange (ETDEWEB)

    Ligotke, M.W.

    1993-02-01

    Wind erosion tests were performed in a wind tunnel in support of the development of long-term protective barriers to cap stabilized waste sites at the Hanford Site. Controlled wind and saltating sand erosive stresses were applied to physical models of barrier surface layers to simulate worst-case eolian erosive stresses. The goal of these tests was to provide information useful to the design and evaluation of the surface layer composition of an arid-region waste site barrier concept that incorporates a deep fine-soil reservoir. A surface layer composition is needed that will form an armor resistant to eolian erosion during periods of extreme dry climatic conditions, especially when such conditions result in the elimination or reduction of vegetation by water deprivation or wildfire. Because of the life span required of Hanford waste barriers, it is important that additional work follow these wind tunnel studies. A modeling effort is planned to aid the interpretation of test results with respect to the suitability of pea gravel to protect the finite-soil reservoir during long periods of climatic stress. It is additionally recommended that wind tunnel tests be continued and field data be obtained at prototype or actual barrier sites. Results wig contribute to barrier design efforts and provide confidence in the design of long-term waste site caps for and regions.

  18. Testing compost as an anti wind erosion agent in a wind tunnel

    NARCIS (Netherlands)

    Vos, de J.A.

    1996-01-01

    The potential of compost as an anti wind erosion agent was studied in a wind tunnel on a sandy soil susceptible to wind erosion. Soil treated with a compost-water mixture, which forms a crust on the soil surface after drying, was exposed to a series of increasing wind speeds. Two composts were

  19. Potential threat of southern Moravia soils by wind erosion

    Directory of Open Access Journals (Sweden)

    Jana Dufková

    2004-01-01

    Full Text Available Wind erosion is caused by meteorological factors such as wind, precipitation and evaporation that influence the soil humidity. Erosive-climatological factor expresses wind and humidity conditions of particular landscape. This is an index of the influence of average soil surface humidity and average wind velocity on average soil erodibility by wind. On the basis of average wind velocity and Konček’s humidity index, the values of the erosive-climatological factor for three chosen areas of Czech republic (Telč-Kostelní Myslová, Znojmo-Kuchařovice and Brno-Tuřany, where the pro-cesses of wind erosion could exist, were evaluated. Thus, the change of the factor’s value during the period of 1961 – 2000 was studied. The linear trend for the region of Brno and Znojmo (dry areas shows increasing threat of soils by wind erosion, the contrary situation is at the humid area (Telč. The results prove the influence of soil humidity on the erosive-climatological factor and hereby the influence on wind erosion spreadout.

  20. Determination of Soil Endangerment by Wind Erosion with Consideration of Legislative Changes in Acceptable Soil Loss

    Directory of Open Access Journals (Sweden)

    Streďanský Jozef

    2015-03-01

    Full Text Available Value tightening of acceptable soil loss by wind erosion in amendment to the Act No. 220/2004 on Protection and Use of Agricultural Land in the Slovak Republic from 1st of April 2013 is necessary to reconsider wind erosion intensity in agricultural territories. The paper presents results of wind erosion intensity calculation by using Wind Erosion Equation (WEQ that is recommended by Act No. 220/2004. As observed we choose cadastral area Moèenok territory and had determined and compared changes in levels of soil endangerment of arable land by wind and spatial delamination of wind erosion in specific territory of Moèenok. According to WEQ calculation, we determined that soil loss from 3778.85 ha arable land is 1220.52 ha, which is highly endangerment by wind erosion. By defining levels of soil erosion endangerment (LSEE, we found out that area in 3rd class of endangerment rose from 1.48% to 43.37% after changing acceptable soil from 40 to 15 t ha-1 year-1. Results enable us to specify priority areas where to implement erosion control measures in according to sustainable use and protection of arable land in model area.

  1. Comparative rates of wind versus water erosion from a small semiarid watershed in southern Arizona, USA

    Science.gov (United States)

    Both wind erosion and water erosion can be serious land degradation processes in semi-arid dry-lands. However, the relative erosion rates of wind and water erosion have rarely been studied simultaneously and are poorly quantified. In this study, wind erosion and water erosion rates were simultaneous...

  2. Raindrop and flow interactions for interrill erosion with wind-driven rain

    NARCIS (Netherlands)

    Erpul, G.; Gabriels, D.; Darell Norton, L.; Dennis, C.; Huang, C.H.; Visser, S.M.

    2013-01-01

    Wind-driven rain (WDR) experiments were conducted to evaluate the interrill component of the Water Erosion Prediction Project model with a two-dimensional experimental set-up in a wind tunnel. Synchronized wind and rain simulations were applied to soil surfaces on windward and leeward slopes of 7,

  3. Long term erosion resistance of unprotected radon suppression earth covers to wind stresses

    Energy Technology Data Exchange (ETDEWEB)

    Bander, T.J.

    1980-10-01

    Estimates of the amount of soil cover lost due to wind erosion are obtained using three different models. One model developed by W. S. Chepil employs a wind erosion equation which is based on wind tunnel and agricultural field measurements. The second model is based on an analytical solution of the saltation process obtained by P. R. Owen and agrees well with the data of Bagnold and Zingg. The third model was developed by Gillette and is based on a modification of the horizontal flux equation used by Bagnold and Chepil. Basic differences between the models are examined and a comparison of the soil movement predicted by each is presented. The usefulness of these wind erosion models as guidance in designing long term erosion-resistant covers for tailings piles is considered.

  4. Wind erosion control of soils using polymeric materials

    Directory of Open Access Journals (Sweden)

    Mohammad Movahedan

    2012-07-01

    Full Text Available Wind erosion of soils is one of the most important problems in environment and agriculture which could affects several fields. Agricultural lands, water reservoires, irrigation canals, drains and etc. may be affected by wind erosion and suspended particles. As a result wind erosion control needs attention in arid and semi-arid regions. In recent years, some polymeric materials have been used for improvement of structural stability, increasing aggregate stability and soil stabilization, though kind of polymer, quantity of polymer, field efficiency and durability and environmental impacts are some important parameters which should be taken into consideration. In this study, a Polyvinil Acetate-based polymer was used to treat different soils. Then polymer-added soil samples were investigated experimentally in a wind tunnel to verify the effecte of polymer on wind erosion control of the soils and the results were compared with water treated soil samples. The results of wind tunnel experiments with a maximum 26 m/s wind velocity showed that there was a significat difference between the erosion of polymer treated and water treated soil samples. Application of 25g/m2 polymer to Aeolian sands reduced the erosion of Aeolian sands samples to zero related to water treated samples. For silty and calyey soils treated by polymer, the wind erosion reduced minimum 90% in relation to water treated samples.

  5. Integrated spatial assessment of wind erosion risk in Hungary

    Science.gov (United States)

    Pásztor, László; Négyesi, Gábor; Laborczi, Annamária; Kovács, Tamás; László, Elemér; Bihari, Zita

    2016-11-01

    Wind erosion susceptibility of Hungarian soils was mapped on the national level integrating three factors of the complex phenomenon of deflation (physical soil features, wind characteristics, and land use and land cover). Results of wind tunnel experiments on erodibility of representative soil samples were used for the parametrization of a countrywide map of soil texture compiled for the upper 5 cm layer of soil, which resulted in a map representing threshold wind velocity exceedance. Average wind velocity was spatially estimated with 0.5' resolution using the Meteorological Interpolation based on Surface Homogenised Data Basis (MISH) method elaborated for the spatial interpolation of surface meteorological elements. The probability of threshold wind velocity exceedance was determined based on values predicted by the soil texture map at the grid locations. Ratio values were further interpolated to a finer 1 ha resolution using sand and silt content of the uppermost (0-5 cm) layer of soil as spatial co-variables. Land cover was also taken into account, excluding areas that are not relevant to wind erosion (forests, water bodies, settlements, etc.), to spatially assess the risk of wind erosion. According to the resulting map of wind erosion susceptibility, about 10 % of the total area of Hungary can be identified as susceptible to wind erosion. The map gives more detailed insight into the spatial distribution of wind-affected areas in Hungary compared to previous studies.

  6. Integrated spatial assessment of wind erosion risk in Hungary

    Directory of Open Access Journals (Sweden)

    L. Pásztor

    2016-11-01

    Full Text Available Wind erosion susceptibility of Hungarian soils was mapped on the national level integrating three factors of the complex phenomenon of deflation (physical soil features, wind characteristics, and land use and land cover. Results of wind tunnel experiments on erodibility of representative soil samples were used for the parametrization of a countrywide map of soil texture compiled for the upper 5 cm layer of soil, which resulted in a map representing threshold wind velocity exceedance. Average wind velocity was spatially estimated with 0.5′ resolution using the Meteorological Interpolation based on Surface Homogenised Data Basis (MISH method elaborated for the spatial interpolation of surface meteorological elements. The probability of threshold wind velocity exceedance was determined based on values predicted by the soil texture map at the grid locations. Ratio values were further interpolated to a finer 1 ha resolution using sand and silt content of the uppermost (0–5 cm layer of soil as spatial co-variables. Land cover was also taken into account, excluding areas that are not relevant to wind erosion (forests, water bodies, settlements, etc., to spatially assess the risk of wind erosion. According to the resulting map of wind erosion susceptibility, about 10 % of the total area of Hungary can be identified as susceptible to wind erosion. The map gives more detailed insight into the spatial distribution of wind-affected areas in Hungary compared to previous studies.

  7. An Evaluation of the Wind Erosion Module in DUSTRAN

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, William J.; Allwine, K Jerry; Fritz, Brad G.; Rutz, Frederick C.; Rishel, Jeremy P.; Chapman, Elaine G.

    2008-03-01

    Pacific Northwest National Laboratory (PNNL) has developed a dust transport model (DUSTRAN), which calculates atmospheric dust concentrations that result from both natural and human activity. DUSTRAN is a comprehensive dispersion modeling system, consisting of a dust-emissions module, a diagnostic meteorological model, and dispersion models that are integrated seamlessly into GIS software. DUSTRAN functions as a console application and allows the user to interactively create a release scenario and run the underlying models. We have recently had the opportunity to compare dust concentrations calculated by DUSTRAN with observations of wind erosion made on the U.S. Department of Energy’s Hanford Site in southeastern Washington. In this paper we describe both DUSTRAN’s algorithm for predicting the source strength of windblown dust and the comparison of simulated dust concentrations with data. The comparisons use observations of PM10 concentrations for three separate dust events on the Hanford Site in 2001. The dust measurements were made as part of an effort to monitor site recovery following a large range fire that occurred on the Hanford Site in 2000. The comparisons have provided both encouragement as to the practical value of the wind erosion module in DUSTRAN and examples of occasions when the simulations and observations diverge. In general, the maximum dust concentrations from the simulations and the observations for each dust event agreed closely. Because of the lack of soil moisture information, the model was run in a “dry” mode. However, some discrepancies between the observations and the model suggest that accounting for soil moisture should be done where possible. For low dust concentrations, DUSTRAN tends to overestimate PM10 levels. This may be a weakness in the simple form of the dust flux parameterization. It could also be a reflection of deviations of the threshold friction velocity from our nominal value of 20 cm s-1. Overall, however, we have

  8. Soil erosion rates from mixed soil and gravel surfaces in a wind tunnel

    Energy Technology Data Exchange (ETDEWEB)

    Ligotke, M.W.; Klopfer, D.C.

    1990-08-01

    Protective barriers have been identified as integral components of plans to isolate defense waste on the Hanford Site. The use of natural materials to construct protective barriers over waste site is being considered. Design requirements for protective barriers include preventing exposure of buried waste, and restricting penetration or percolation of surface waters through the waste zone. Studies were initiated to evaluate the effects of wind erosion on candidate protective barrier surfaces. A wind tunnel was used to provide controlled erosive stresses and to investigate the erosive effects of wind forces on proposed surface layers for protective barriers. Mixed soil and gravel surfaces were prepared and tested for resistance to wind erosion at the Pacific Northwest Laboratory Aerosol Wind Tunnel Research Facility. These tests were performed to investigate surface deflation caused by suspension of soil from various surface layer configurations and to provide a comparison of the relative resistance of the different surfaces to wind erosion. Planning, testing, and analyzing phases of this wind erosion project were coordinated with other tasks supporting the development of protective barriers. These tasks include climate-change predictions, field studies and modeling efforts. This report provides results of measurements of deflation caused by wind forces over level surfaces. Section 2.0 reviews surface layer characteristics and previous relevant studies on wind erosion, describes effects of erosion, and discusses wind tunnel modeling. Materials and methods of the wind tunnel tests are discussed in Section 3.0. Results and discussion are presented in Section 4.0, and conclusions and recommendations Section 5.0. 53 refs., 29 figs., 7 tabs.

  9. Wind Erosion in SA – An Economic Perspective

    OpenAIRE

    Chambers, Adam; Bright, Melissa; Forward, Giles

    2005-01-01

    Wind erosion has long been seen as a significant environmental issue within South Australia. But is it really an economic issue? This study suggests that even though it is acknowledged that wind erosion has an environmental cost, it is not economic to simply try and fix all wind erosion prone areas in South Australia. Land managers and therefore government policy needs to be selective about the areas they treat, and the strategies used, in order for there to be an economic benefit of ameliora...

  10. Wind erosion potential after land application of biosolids

    Science.gov (United States)

    PI, H.; Sharratt, B. S.; Schillinger, W. F.; Bary, A.; Cogger, C.

    2017-12-01

    The world population is currently 7.6 billion and, along with continued population growth, comes the challenge of disposing of wastewater and sewage sludge (biosolids). Applying biosolids to agricultural land to replace synthetic fertilizers represents a relatively safe method to recycle or sustainably use biosolids. While land application of biosolids is recognized as a sustainable management practice for enhancing soil health, no studies have determined the effects of biosolids on soil wind erosion. Wind erosion potential of a silt loam was assessed using a portable wind tunnel after applying synthetic and biosolid fertilizer to conventional and conservation tillage practices during the summer fallow phase of a winter wheat-summer fallow rotation in 2015 and 2016 in east-central Washington. Little difference in soil loss was observed between biosolid and synthetic fertilizer treatments, but this result appeared to be dependent on susceptibility of the soil to erosion. Regression analysis between soil loss from fertilizer or tillage treatments indicated that soil loss was lower from biosolid versus synthetic fertilizer and conservation versus conventional tillage at high erosion rates. This suggests that biosolids may reduce wind erosion under highly erodible conditions. Meanwhile, heavy metal concentrations in the windblown sediment were similar for the biosolid and synthetic fertilizer treatments whereas metal loss in windblown sediment was 10% lower from biosolid than synthetic fertilizer. Our results indicate that land application of biosolids did not accelerate the loss of metals or nutrients from soils during high winds. KeywordsLand application of biosolids; wind erosion; wind tunnel; sustainable agriculture

  11. Ecological site-based assessments of wind and water erosion: informing accelerated soil erosion management in rangelands

    Science.gov (United States)

    Webb, Nicholas P.; Herrick, Jeffrey E.; Duniway, Michael C.

    2014-01-01

    Accelerated soil erosion occurs when anthropogenic processes modify soil, vegetation or climatic conditions causing erosion rates at a location to exceed their natural variability. Identifying where and when accelerated erosion occurs is a critical first step toward its effective management. Here we explore how erosion assessments structured in the context of ecological sites (a land classification based on soils, landscape setting and ecological potential) and their vegetation states (plant assemblages that may change due to management) can inform systems for reducing accelerated soil erosion in rangelands. We evaluated aeolian horizontal sediment flux and fluvial sediment erosion rates for five ecological sites in southern New Mexico, USA, using monitoring data and rangeland-specific wind and water erosion models. Across the ecological sites, plots in shrub-encroached and shrub-dominated vegetation states were consistently susceptible to aeolian sediment flux and fluvial sediment erosion. Both processes were found to be highly variable for grassland and grass-succulent states across the ecological sites at the plot scale (0.25 Ha). We identify vegetation thresholds that define cover levels below which rapid (exponential) increases in aeolian sediment flux and fluvial sediment erosion occur across the ecological sites and vegetation states. Aeolian sediment flux and fluvial erosion in the study area can be effectively controlled when bare ground cover is 100 cm in length is less than ~35%. Land use and management activities that alter cover levels such that they cross thresholds, and/or drive vegetation state changes, may increase the susceptibility of areas to erosion. Land use impacts that are constrained within the range of natural variability should not result in accelerated soil erosion. Evaluating land condition against the erosion thresholds identified here will enable identification of areas susceptible to accelerated soil erosion and the development of

  12. Ecological site‐based assessments of wind and water erosion: informing accelerated soil erosion management in rangelands.

    Science.gov (United States)

    Webb, Nicholas P; Herrick, Jeffrey E; Duniway, Michael C

    Accelerated soil erosion occurs when anthropogenic processes modify soil, vegetation, or climatic conditions causing erosion rates at a location to exceed their natural variability. Identifying where and when accelerated erosion occurs is a critical first step toward its effective management. Here we explored how erosion assessments structured in the context of ecological sites (a land classification based on soils, landscape setting, and ecological potential) and their vegetation states (plant assemblages that may change due to management) can inform systems for reducing accelerated soil erosion in rangelands. We evaluated aeolian horizontal sediment flux and fluvial sediment erosion rates for five ecological sites in southern New Mexico, USA, using monitoring data and rangeland-specific wind and water erosion models. Across the ecological sites, plots in shrub-encroached and shrub-dominated vegetation states were consistently susceptible to aeolian sediment flux and fluvial sediment erosion. Both processes were found to be highly variable for grassland and grass–succulent states across the ecological sites at the plot scale (0.25 ha). We identified vegetation thresholds that define cover levels below which rapid (exponential) increases in aeolian sediment flux and fluvial sediment erosion occur across the ecological sites and vegetation states. Aeolian sediment flux and fluvial erosion in the study area could be effectively controlled when bare ground cover was 100 cm in length was less than ∼35%. Land use and management activities that alter cover levels such that they cross thresholds, and/or drive vegetation state changes, may increase the susceptibility of areas to erosion. Land use impacts that are constrained within the range of natural variability should not result in accelerated soil erosion. Evaluating land condition against the erosion thresholds identified here will enable identification of areas susceptible to accelerated soil erosion and the

  13. 7 CFR 610.13 - Equations for predicting soil loss due to wind erosion.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Equations for predicting soil loss due to wind erosion... Erosion Prediction Equations § 610.13 Equations for predicting soil loss due to wind erosion. (a) The equation for predicting soil loss due to wind in the Wind Erosion Equation (WEQ) is E = f(IKCLV). (For...

  14. Building Chinese wind data for Wind Erosion Prediction System using surrogate US data

    Science.gov (United States)

    Wind erosion is a global problem, especially in arid and semiarid regions of the world, which leads to land degradation and atmosphere pollution. The process-based Wind Erosion Prediction System (WEPS), developed by the USDA, is capable of simulating the windblown soil loss with changing weather and...

  15. Estimation of wind erosion from construction of a railway in arid Northwest China

    Directory of Open Access Journals (Sweden)

    Benli Liu

    2017-06-01

    Full Text Available A state-of-the-art wind erosion simulation model, the Wind Erosion Prediction System and the United States Environmental Protection Agency's AP 42 emission factors formula, were combined together to evaluate wind-blown dust emissions from various construction units from a railway construction project in the dry Gobi land in Northwest China. The influence of the climatic factors: temperature, precipitation, wind speed and direction, soil condition, protective measures, and construction disturbance were taken into account. Driven by daily and sub-daily climate data and using specific detailed management files, the process-based WEPS model was able to express the beginning, active, and ending phases of construction, as well as the degree of disturbance for the entire scope of a construction project. The Lanzhou-Xinjiang High-speed Railway was selected as a representative study because of the diversities of different climates, soil, and working schedule conditions that could be analyzed. Wind erosion from different working units included the building of roadbeds, bridges, plants, temporary houses, earth spoil and barrow pit areas, and vehicle transportation were calculated. The total wind erosion emissions, 7406 t, for the first construction area of section LXS-15 with a 14.877 km length was obtained for quantitative analysis. The method used is applicable for evaluating wind erosion from other complex surface disturbance projects.

  16. Beryllium-7 measurements of wind erosion on sloping fields in the wind-water erosion crisscross region on the Chinese Loess Plateau.

    Science.gov (United States)

    Zhang, Jiaqiong; Yang, Mingyi; Deng, Xinxin; Liu, Zhang; Zhang, Fengbao; Zhou, Weiying

    2018-02-15

    Soil erosion is complex in the wind-water erosion crisscross region of the Chinese Loess Plateau, as interleaving of wind and water erosion occurs on both temporal and spatial scales. It is difficult to distinguish wind erosion from the total erosion in previous studies due to the untraceable of aeolian particles and the limitation of feasible methods and techniques. This study used beryllium-7 measurements to study wind erosion in the wind-water erosion crisscross region on the Chinese Loess Plateau arms to delineate wind erosion distribution, to analyze its implication to erosive winds and surface microrelief, and to determine correlations between erosion rates and slope gradients. Results obtained using beryllium-7 measurements based on observation plots were verified with saltating particle collection method, and were also verified on a field scale. Results indicated that the effective resultant erosion wind was from northward, which was proved by the eight-directional distributed saltating particles. The microrelief of the ground surface contributed to the formation of high or low erosion centers. Wind erosion rates increased with a linear (R 2 ≥0.95) or exponential (R 2 ≥0.83) fitting increase in the slope gradients as reported in previous studies. Compared to wind erosion on field scale, both the plots and fields exhibited similar distribution patterns in wind erosion isolines. We also determined that the wind erosion rate for two fields estimated, based on equations developed from plot scale was acceptable. This study validates the feasibility of beryllium-7 measurements for soil-wind erosion field experiments and the potential to expand this approach to real field conditions. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Influence of climate conditions on the intensity and spreading of wind erosion

    Directory of Open Access Journals (Sweden)

    Jana Dufková

    2005-01-01

    Full Text Available The influence of climate conditions on the intensity and spreading of wind erosion was considered in the area of South Moravia. For this purpose, 16 meteorological stations were selected on the basis of accessibility of required data, their adequate representativeness, homogeneity, and position of the stations. It was necessary to make the database of climatological factors (such as wind velocity, precipitation and air temperature of the period of 1961–2003 for the analyses of climatological data. The climatological data was then evaluated for the periods of 1961–2003, 1961–1990, 1991–2000, and 1971–2000. Clima- tic erosion factor, which explains potential erodibility of soil by wind, was determined through the analyses of factors influencing the wind erosion. The assessment of influence of expected climate change on the intensity and spreading of wind erosion consists in the selection of suitable climatological model and climate change scenarios on the basis of ability to model the three climatological factors (wind velocity, precipitation and air temperature. Climate change scenarios were then applied on the data of the selected climatological stations and the assessment of changes in data sets and the comparative analysis of the outputs of the scenarios with measured data from the normal period of 1961–1990 were done. The climatic erosion factor was also determined from the altered data of the scenarios.

  18. Determination of wind erosion intensity on heavy clay soils

    Directory of Open Access Journals (Sweden)

    Jana Kozlovsky Dufková

    2010-01-01

    Full Text Available Wind erosion, common problem of light-textured soils, was determined on heavy clay soils in the foothills of Bílé Karpaty Mountains, Czech Republic. Soil erodibility by wind was determined from the Map of potential erodibility of soil by wind and from the calculation of potential and real soil loss by wind. All the determinations show underestimation of soil erodibility by wind on heavy clay soils, because methods that are used for this are based above all on the assessment of clay particles content and the presumption the more clay particles soil contains, the less vulnerable to wind erosion is. The potential erodibility of soil by wind is 0,09 t . ha−1 per year. The determined value does not exceed the tolerable soil loss limit 10 t . ha−1 per year for deep soils. The real average erodibility of soil by wind has the highest value 1,47 g . m−2 on November 30th, 2008. Other soil losses that do not exceed the tolerable soil loss limit 1,4 g . m−2, were determined on March 18th and 28th, 2008. Big difficulties come with the assessment of the erodibility of heavy clay soils in the areas, where soil erosion ve­ri­fia­bly exists, but it is not assessable by objective calculating methods. Evident necessity of new know­ledge concerning the determination of wind erosion intensity follows from the results.

  19. Determination of wind erosion next to shelterbelts

    Directory of Open Access Journals (Sweden)

    Jana Dufková

    2007-01-01

    Full Text Available The influence of shelterbelts on the erodibility of soil by wind was studied at three chosen shelterbelts of Southern Moravia, Czech Republic – near the shelterbelts in the cadastral areas of Dolní Dunajovice, Micmanice and Suchá Loz. Ambulatory measurements of wind velocity as so as soil sampling for soil humidity analyses, non-erodible and clay particles analyses were done during the year of 2006. Subsequently, real erodibility of soil by wind was determined at these three areas. Results of the measurements and calculations verify positive effect of shelterbelts consisted in wind velocity decreasing (at about 78% in average, soil humidity increasing (at about 102% in average and soil resistance increasing (at about 70% in average at the leeward side of the shelterbelts.

  20. 75 FR 75961 - Notice of Implementation of the Wind Erosion Prediction System for Soil Erodibility System...

    Science.gov (United States)

    2010-12-07

    ... Wind Erosion Prediction System for Soil Erodibility System Calculations for the Natural Resources... Erosion Prediction System (WEPS) for soil erodibility system calculations scheduled for implementation for... Erosion Equation (WEQ) where applicable. DATES: Effective Date: This is effective December 7, 2010...

  1. An index guiding temporal planting policies for wind erosion reduction

    NARCIS (Netherlands)

    Zhao, C.X.; Zheng, D.W.; Stigter, C.J.; He, W.Q.; Tuo, D.B.; Zhao, P.

    2006-01-01

    Vegetation cover has spatial as well as temporal characteristics, but the latter are often neglected. Temporal cover characteristics were explored to recommend planting policies for returning arable land into land better protected from serious wind erosion during late autumn, winter, and

  2. Enhancing wind erosion monitoring and assessment for US rangelands

    Science.gov (United States)

    Wind erosion is a major resource concern for rangeland managers because it can impact soil health, ecosystem structure and function, hydrologic processes, agricultural production and air quality. Despite its significance, little is known about which landscapes are eroding, by how much, and when. T...

  3. Commonalities in WEPP and WEPS and efforts towards a single erosion process model

    NARCIS (Netherlands)

    Visser, S.M.; Flanagan, D.C.

    2004-01-01

    Since the late 1980's, the Agricultural Research Service (ARS) of the United States Department of Agriculture (USDA) has been developing process-based erosion models to predict water erosion and wind erosion. During much of that time, the development efforts of the Water Erosion Prediction Project

  4. Crater Mound Formation by Wind Erosion on Mars

    Science.gov (United States)

    Steele, L. J.; Kite, E. S.; Michaels, T. I.

    2018-01-01

    Most of Mars' ancient sedimentary rocks by volume are in wind-eroded sedimentary mounds within impact craters and canyons, but the connections between mound form and wind erosion are unclear. We perform mesoscale simulations of different crater and mound morphologies to understand the formation of sedimentary mounds. As crater depth increases, slope winds produce increased erosion near the base of the crater wall, forming mounds. Peak erosion rates occur when the crater depth is ˜2 km. Mound evolution depends on the size of the host crater. In smaller craters mounds preferentially erode at the top, becoming more squat, while in larger craters mounds become steeper sided. This agrees with observations where smaller craters tend to have proportionally shorter mounds and larger craters have mounds encircled by moats. If a large-scale sedimentary layer blankets a crater, then as the layer recedes across the crater it will erode more toward the edges of the crater, resulting in a crescent-shaped moat. When a 160 km diameter mound-hosting crater is subject to a prevailing wind, the surface wind stress is stronger on the leeward side than on the windward side. This results in the center of the mound appearing to "march upwind" over time and forming a "bat-wing" shape, as is observed for Mount Sharp in Gale crater.

  5. Meteorological conditions during extreme wind erosion events on heavy soils

    Directory of Open Access Journals (Sweden)

    Bronislava Mužíková

    2010-01-01

    Full Text Available Wind erosion in the Czech Republic conditions poses relatively a lot of danger, especially for the most fertile areas, where agricultural land is more vulnerable due to the large pieces of land and inappropriate crop rotation. This process causes damage to agriculture by loss of topsoil, fertilizers, seeds and crop damage as well as sedimentation in water recipients and on roads. It also has negative impacts on human health (airborne dust. Wind erosion is especially affected by climatic elements (wind, temperature, precipitation and evaporation etc. and soil characteristics (soil type, content of erodible particles, soil moisture. Wind erosion affects mainly light and medium heavy soil. South Moravia is an example of the territories to which this rule does not apply. Although soils in the Carpathian flysch subsoil are mainly heavy, erosion has been causing damage here for many decades. Quite strong dust storms are not rare, especially at the end of winter and in early spring when the soil is not covered by vegetation.Notable cases of dust storms in the area were recorded in local chronicles, and then written in the summary publication by dr. Švehlík. Interest of this publication was focused on the most destructive cases of dust storms in Bílé Karpaty foothills. The aim was to study meteorological conditions during the period before and during the occurrence of dust storms in the area in detail and to find the relationship between weather and the intensity of wind erosion. The data of wind speed and direction, temperature, precipitation and snow were evaluated. In all cases the average daily air temperature and ground air temperature was over the freezing point or closely under it. The temperature generally increased before the dust storm occurrence and it often happened from negative to positive temperature and the soil probably defrosted. Snow cover was very small or there was no snow cover at all. In the course of April wind erosion

  6. WIND EROSION INTENSITY DETERMINATION USING SOIL PARTICLE CATCHER DEVICES

    Directory of Open Access Journals (Sweden)

    Lenka Lackóová

    2013-12-01

    Full Text Available To analyze wind erosion events in the real terrain conditions, we proposed to construct a prototype of soil particle catcher devices to trap soil particles. With these devices we are able to measure the intensity of wind erosion at six different heights above the soil surface in one location or at three different heights in two places. It is possible to use them for six different places at the same time as well. We performed field measurements to determine the amount of soil particles transported by the wind between 26th – 31st March 2012. Each measuring took 60 minutes. After this time the soil particle catchers were emptied and further measurements carried out. At the beginning we selected two places for measurement (soil HPJ 16 and 37 at two heights, one above the other. Then we used two measuring systems 40 m apart at two sites (D2 and D4 and the soil captured at two heights (0, 1. The maximum weight of soil particles trapped in measuring system D2 at height (0 was 1242.7 g at a wind speed of 9.6 ms-1. At measurement height (1 the maximum weight was 72.7 g trapped at the same average hourly rate, but during different measurement events. The measuring system at D4 trapped the highest amount of soil at a wind speed of 8.9 ms-1 (1141.7 g at height (0 and at a speed of 9.3 ms-1 (22.3 g at height (1. During the measurements with the two basic measuring systems D4 and D2, we measured the wind erosion intensity together with soil particle catchers D1 and D3. D3 was placed between devices D4 and D2, D1 was 20 m ahead D2. Soil particle catchers were placed on the soil surface at height position (0. We measured increasing soil erosion downwind on four locations spaced at 20 m. The results show that with there is an increasing quantity of particles collected as the erosive surface length increases, due to the so-called snowball effect. We analyzed selected trapped soil samples in order to determine the size of the soil particles and their proportion

  7. Implications of climate change on wind erosion of agricultural lands in the Columbia plateau

    Directory of Open Access Journals (Sweden)

    B.S. Sharratt

    2015-12-01

    Full Text Available Climate change may impact soil health and productivity as a result of accelerated or decelerated rates of erosion. Previous studies suggest a greater risk of wind erosion on arid and semi-arid lands due to loss of biomass under a future warmer climate. There have been no studies conducted to assess the impact of climate change on wind erosion in the Columbia Plateau of the Pacific Northwest United States where wind erosion of agricultural lands can cause exceedance of national air quality standards. The Wind Erosion Prediction System (WEPS was used to assess wind erosion and PM10 (particulate matter ≤10 µm in aerodynamic diameter emissions under a future climate projected by downscaling 18 Global Climate Models (GCM for a conservative emissions pathway. Wind erosion simulations were conducted at Lacrosse and Lind, WA and Moro, OR on a winter wheat-summer fallow (WW-SF rotation and at Lind on an additional winter wheat-camelina-summer fallow (WW-Cam-SF rotation. Each rotation was subject to conservation or conventional tillage practices for a baseline (1970–1999 and mid-21st century climate (2035–2064. A significant increase in temperature and nominal increases in precipitation were projected by an ensemble of climate models for the Columbia Plateau by the mid-21st century. Soil and PM10 losses were 25–84% lower for a mid-21st century climate, due in part to greater biomass production associated with CO2 fertilization and warmer temperatures. The reduction in soil and PM10 loss is projected to be more apparent for conservation tillage practices in the future. Soil and PM10 losses were greater from a WW-Cam-SF rotation than WW-SF rotation when conservation tillage practices were employed during the fallow phase of the rotations. Despite accounting for differences in the length of each rotation, annual soil and PM10 losses remained higher for the WW-Cam-SF rotation than the WW-SF rotation. Soil and PM10 losses were more variable across

  8. [Impact of wind-water alternate erosion on the characteristics of sediment particles].

    Science.gov (United States)

    Tuo, Deng-Feng; Xu, Ming-Xiang; Ma, Xin-Xin; Zheng, Shi-Qing

    2014-02-01

    Wind and water are the two dominant erosion agents that caused soil and water losses in the wind-water alternate erosion region on the Loess Plateau. It is meaningful to study the impact of wind-water alternate erosion on the characteristics of soil particles for understanding the response of soil quality and environment to erosion. Through wind tunnel combined rainfall simulation, this paper studied the characteristics of the erosive sediment particles under the effect of wind-water alternate erosion. The results showed that the particles of 0-1 cm soil were coarsened by wind erosion at the wind speeds of 11 and 14 m x s(-1) compared with no wind erosion. Soil fine particles ( 0.05 mm) increased by 16.8%-20.8%. The physical property of surface soil was changed by the wind erosion, which, in turn, caused an increase in finer particles content in the sediment. Compared with no wind erosion, fine particles (water-wind alternate erosion increased by 2.7%-18.9% , and coarse particles (> 0.05 mm) decreased by 3.7%-9.3%. However, the changing trend of erosive sediment particles after the wind erosion at wind speeds of 11 and 14 m x s(-1) was different along with the rainfall intensity and duration. The erosive sediment particles at the rainfall intensities of 60, 80, 100 mm x h(-1) changed to greater extents than at the 150 mm x h(-1) rainfall intensity with longer than 15 min runoff flowing.

  9. Ice-Release and Erosion Resistant Materials for Wind Turbines

    Science.gov (United States)

    Zhang, Wei; Brinn, Cameron; Cook, Alex; Pascual-Marquez, Fernando

    2017-11-01

    Icing conditions may cause wind turbine generators to partially lose productivity or to be completely shut down to avoid structural damage. At present, commercially available technologies to mitigate this problem consist of expensive, energy hungry heating elements, which costs roughly 70,000 euro per medium size turbine. Conventional passive ice protection coating systems heavily rely on delicate surface structures and expensive materials to create water repellent superhydrophobic / low surface energy surfaces, which have been proven to be ineffective against ice accumulation. The lack of performance among conventional ice protection materials stems from a flaw in the approach to the problem: failure to recognize that water in its liquid form (WATER) and water in its solid form (ICE) are two different things. Something that works for WATER does not automatically work for ICE. Another reason is that many superhydrophobic materials are often reliant upon often fragile micro-structured surfaces to achieve their intended effects. This paper discusses a fundamentally different approach to the creation of a robust, low cost, durable, and multifunctional materials for ice release and erosion resistance. This National Science Foundation sponsored ice-release coating technology holds promise for protecting wind turbine blades and towers, thus potentially increasing reliability for power generation under icing conditions. Because of the vulnerability of wind turbine blades to ice buildup and erosion damages, wind farm facilities stand to reap considerable benefits.

  10. Techniques for simultaneous quantification of wind and water erosion in semi-arid regions

    NARCIS (Netherlands)

    Visser, S.M.; Sterk, G.; Ribolzi, O.

    2004-01-01

    Wind and water erosion are usually studied as two separate processes. However, in semi-arid zones both processes contribute significantly to soil degradation. Whereas for water erosion the direction of sediment transport is controlled by topography, in wind erosion the direction of transport is

  11. Wind erosion potential of a winter wheat–summer fallow rotation after land application of biosolids

    Science.gov (United States)

    While land application of biosolids is recognized as a sustainable management practice for enhancing soil health, no studies have determined the effects of biosolids on soil wind erosion. Wind erosion potential of a silt loam was assessed using a portable wind tunnel after applying synthetic and bio...

  12. Multi-scale wind erosion monitoring and assessment for US rangelands

    Science.gov (United States)

    Wind erosion is a major resource concern for rangeland managers. Although wind erosion is a naturally occurring process in many drylands, land use activities, and land management in particular, can accelerate wind-driven soil loss – impacting ecosystem dynamics and agricultural production, air quali...

  13. Early-season wind erosion influenced by soil-incorporated green manure in the Pacific Northwest

    Science.gov (United States)

    Management strategies are sought to minimize wind erosion of irrigated agricultural soils along the Columbia River of the Inland Pacific Northwest, particularly during the early season (March-April) when high winds coincide with sowing of vegetable crops. Early-season wind erosion potential from soi...

  14. Wind erosion research at an uranium mill tailings site

    Energy Technology Data Exchange (ETDEWEB)

    Sehmel, G A

    1977-07-01

    A uranium mill tailings pile at Grants, New Mexico, was selected for wind erosion research since the configuration provides flat area containing fine sand and made up of larger particles. The wind erosion experiment is discussed. Experimental equipment consists of meteorological instrumentation to automatically activate air samplers as a function of wind speed increments and direction, particle cascade impactors to measure airborne respirable concentrations as a function of particle size, inertial impaction devices to measure nonrespirable fluxes of airborne particles, a virtual particle cascade impactor to measure airborne concentrations of toxic trace elements, and soil depth gauges to measure changes in surface soil elevations as a function of time. Both radioactive particles as well as toxic trace element concentrations are measured. Radioactive particles are measured with both particle cascade impactors as well as high-volume air samplers. In contrast, toxic trace element airborne concentrations are measured only with a two-stage virtual particle cascade impactor. Fluxes of nonrespirable airborne particles are measured with inertial impaction devices. At particle cascade impactor sites, a rotating cyclone preseparator collects nonrespirable particles. In addition at all sites, fluxes of nonrespirable particles are measured using an open cavity inertial impaction device. (JGB)

  15. Wind Tunnel Experiments: Influence of Erosion and Deposition on Wind-Packing of New Snow

    Directory of Open Access Journals (Sweden)

    Christian G. Sommer

    2018-01-01

    Full Text Available Wind sometimes creates a hard, wind-packed layer at the surface of a snowpack. The formation of such wind crusts was observed during wind tunnel experiments with combined SnowMicroPen and Microsoft Kinect sensors. The former provides the hardness of new and wind-packed snow and the latter spatial snow depth data in the test section. Previous experiments had shown that saltation is necessary but not sufficient for wind-packing. The combination of hardness and snow depth data now allows to study the case with saltation in more detail. The Kinect data requires complex processing but with the appropriate corrections, snow depth changes can be measured with an accuracy of about 1 mm. The Kinect is therefore well suited to quantify erosion and deposition. We found that no hardening occurred during erosion and that a wind crust may or may not form when snow is deposited. Deposition is more efficient at hardening snow in wind-exposed than in wind-sheltered areas. The snow hardness increased more on the windward side of artificial obstacles placed in the wind tunnel. Similarly, the snow was harder in positions with a low Sx parameter. Sx describes how wind-sheltered (high Sx or wind-exposed (low Sx a position is and was calculated based on the Kinect data. The correlation between Sx and snow hardness was −0.63. We also found a negative correlation of −0.4 between the snow hardness and the deposition rate. Slowly deposited snow is harder than a rapidly growing accumulation. Sx and the deposition rate together explain about half of the observed variability of snow hardness.

  16. Responses of wind erosion to climate-induced vegetation changes on the Colorado Plateau

    Science.gov (United States)

    Munson, Seth M.; Belnap, Jayne; Okin, Gregory S.

    2011-01-01

    Projected increases in aridity throughout the southwestern United States due to anthropogenic climate change will likely cause reductions in perennial vegetation cover, which leaves soil surfaces exposed to erosion. Accelerated rates of dust emission from wind erosion have large implications for ecosystems and human well-being, yet there is poor understanding of the sources and magnitude of dust emission in a hotter and drier climate. Here we use a two-stage approach to compare the susceptibility of grasslands and three different shrublands to wind erosion on the Colorado Plateau and demonstrate how climate can indirectly moderate the magnitude of aeolian sediment flux through different responses of dominant plants in these communities. First, using results from 20 y of vegetation monitoring, we found perennial grass cover in grasslands declined with increasing mean annual temperature in the previous year, whereas shrub cover in shrublands either showed no change or declined as temperature increased, depending on the species. Second, we used these vegetation monitoring results and measurements of soil stability as inputs into a field-validated wind erosion model and found that declines in perennial vegetation cover coupled with disturbance to biological soil crust resulted in an exponential increase in modeled aeolian sediment flux. Thus the effects of increased temperature on perennial plant cover and the correlation of declining plant cover with increased aeolian flux strongly suggest that sustained drought conditions across the southwest will accelerate the likelihood of dust production in the future on disturbed soil surfaces.

  17. Accelerated rain erosion of wind turbine blade coatings

    DEFF Research Database (Denmark)

    Zhang, Shizhong

    During operation, the fast-moving blades of wind turbines are exposed to continuous impacts with rain droplets, hail, insects, or solid particles. This can lead to erosion of the blades, whereby the electrical efficiency is compromised and expensive repairs may be required. One possible solution...... to this problem is elastic blade coatings, which are able to absorb the impact energy without crack formation. The purpose of the work presented in this thesis has been to design and construct a laboratory experimentation device, which allows an accelerated and reliable evaluation of existing or novel blade...

  18. In-transit wind erosion losses of coal and method of control

    Energy Technology Data Exchange (ETDEWEB)

    Nimerick, K.H.; Laflin, G.P.

    1979-08-01

    Wind tunnel tests show the effects of wind velocity and particle size on the amount of coal lost while in transit. Different coals were evaluated to determine the variables associated with wind erosion. The erosion losses can be substantially reduced by using a binder, or crusting agent, to consolidate the surfaces of the coal into a solid mass which resists erosion. This not only reduces economic loss but minimizes pollution.

  19. Spatial and temporal variations of wind erosion climatic erosivity in the farming-pastoral zone of Northern China

    Science.gov (United States)

    Yue, Shuping; Yang, Ruixin; Yan, Yechao; Yang, Zhengwei; Wang, Dandan

    2018-03-01

    Wind erosion climatic erosivity is an important parameter to assess the possible effects of climatic conditions on wind erosion. In this paper, the wind erosion climatic factor (C-factor), which was used to quantify the wind erosion climatic erosivity, was calculated for the period 1960-2014 based on monthly meteorological data collected from 101 stations in the farming-pastoral zone of Northern China. The Mann-Kendall (M-K) test, trend analysis, and geostatistical analysis methods were used to explore the spatial and temporal characteristics of the wind erosion climatic erosivity in this region. The result suggests that the annual C-factor, with a maximum of 76.05 in 1969 and a minimum of 26.57 in 2007, has a significant decreasing trend over the past 55 years. Strong seasonality in the C-factor was found, with the highest value in spring, which accounts for a significant proportion of the annual C-factor (41.46%). However, the coefficient of variation of the seasonal C-factor reaches a maximum in winter and a minimum in spring. The mean annual C-factor varies substantially across the region. Areas with high values of the mean annual C-factor (C ≥ 100) are located in Ulanqab and Dingxi, while areas with low values (C ≤ 10) lie in Lanzhou, Linxia, Dingxi, Xining, and Chengde. Spatial analysis on the trend of the C-factor reveals that 81% of the stations show statistically significant decreases at a 90% confidence level. An examination of the concentration ratio of the C-factor shows that the wind erosion climatic erosivity is concentrated in spring, especially in April, which makes this period particularly important for implementing soil conservation measures.

  20. Soil tillage and windbreak effects on millet and cowpea: I. Wind speed, evaporation, and wind erosion

    Energy Technology Data Exchange (ETDEWEB)

    Banzhaf, J.; Leihner, D.E.; Buerkert, A. (Univ. of Hohenheim, Stuttgart (Germany)); Serafini, P.G. (Univ. of Arkansas, Fayetteville (United States))

    Deforestation, overgrazing, and declining soil regeneration periods have resulted in increased wind erosion problems in dry areas of the West African Sahel, but little is known about the bio-physical factors involved. This research was conducted to determine the effects of ridging and four different windbreak spacings on wind erosion, potential evaporation, and soil water reserves. A field trial was conducted from 1985 to 1987 on 12 ha of a Psammentic Paleustalf in Southern Niger. Millet, Pennisetum glaucum (L.), and cowpea, Vigna unguiculata (L.) Walp., were seeded in strips on flat and ridged soil. Windbreaks of savannah vegetation were spaced at 6, 20, 40, and 90 m. The effects of ridging on wind speed, evaporation, and wind erosion were small and mostly non-significant. However, average wind speed at 0.3 m above ground in the center of cowpea and millet strips was significantly reduced from 2.8 to 2.1 m s[sup [minus]1] as windbreak distances narrowed from 90 to 6 m. As a consequence, potential evaporation declined by 15% and the amount of windblown soil particles by 50% in ridged and by 70% in flat treatments. Despite reduced potential evaporation, average subsoil water reserves were 14 mm smaller in the 6- than in the 20-m windbreak spacing indicating excessive water extraction by the windbreak vegetation. Thus, establishing windbreaks with natural savannah vegetation may require a careful consideration of the agronomic benefits and costs to competing crops. 21 refs., 5 figs.

  1. Soil tillage and windbreak effects on millet and cowpea: I. Wind speed, evaporation, and wind erosion

    International Nuclear Information System (INIS)

    Banzhaf, J.; Leihner, D.E.; Buerkert, A.; Serafini, P.G.

    1992-01-01

    Deforestation, overgrazing, and declining soil regeneration periods have resulted in increased wind erosion problems in dry areas of the West African Sahel, but little is known about the bio-physical factors involved. This research was conducted to determine the effects of ridging and four different windbreak spacings on wind erosion, potential evaporation, and soil water reserves. A field trial was conducted from 1985 to 1987 on 12 ha of a Psammentic Paleustalf in Southern Niger. Millet, Pennisetum glaucum (L.), and cowpea, Vigna unguiculata (L.) Walp., were seeded in strips on flat and ridged soil. Windbreaks of savannah vegetation were spaced at 6, 20, 40, and 90 m. The effects of ridging on wind speed, evaporation, and wind erosion were small and mostly non-significant. However, average wind speed at 0.3 m above ground in the center of cowpea and millet strips was significantly reduced from 2.8 to 2.1 m s -1 as windbreak distances narrowed from 90 to 6 m. As a consequence, potential evaporation declined by 15% and the amount of windblown soil particles by 50% in ridged and by 70% in flat treatments. Despite reduced potential evaporation, average subsoil water reserves were 14 mm smaller in the 6- than in the 20-m windbreak spacing indicating excessive water extraction by the windbreak vegetation. Thus, establishing windbreaks with natural savannah vegetation may require a careful consideration of the agronomic benefits and costs to competing crops. 21 refs., 5 figs

  2. Remote sensing of land use/cover changes and its effect on wind erosion potential in southern Iran

    Directory of Open Access Journals (Sweden)

    Mahrooz Rezaei

    2016-07-01

    Full Text Available Wind erosion is a complex process influenced by different factors. Most of these factors are stable over time, but land use/cover and land management practices are changing gradually. Therefore, this research investigates the impact of changing land use/cover and land management on wind erosion potential in southern Iran. We used remote sensing data (Landsat ETM+ and Landsat 8 imagery of 2004 and 2013 for land use/cover mapping and employed the Iran Research Institute of Forest and Rangeland (IRIFR method to estimate changes in wind erosion potential. For an optimal mapping, the performance of different classification algorithms and input layers was tested. The amount of changes in wind erosion and land use/cover were quantified using cross-tabulation between the two years. To discriminate land use/cover related to wind erosion, the best results were obtained by combining the original spectral bands with synthetic bands and using Maximum Likelihood classification algorithm (Kappa Coefficient of 0.8 and 0.9 for Landsat ETM+ and Landsat 8, respectively. The IRIFR modelling results indicate that the wind erosion potential has increased over the last decade. The areas with a very high sediment yield potential have increased, whereas the areas with a low, medium, and high sediment yield potential decreased. The area with a very low sediment yield potential have remained constant. When comparing the change in erosion potential with land use/cover change, it is evident that soil erosion potential has increased mostly in accordance with the increase of the area of agricultural practices. The conversion of rangeland to agricultural land was a major land-use change which lead to more agricultural practices and associated soil loss. Moreover, results indicate an increase in sandification in the study area which is also a clear evidence of increasing in soil erosion.

  3. Manufacturing issues which affect coating erosion performance in wind turbine blades

    Science.gov (United States)

    Cortés, E.; Sánchez, F.; Domenech, L.; Olivares, A.; Young, T. M.; O'Carroll, A.; Chinesta, F.

    2017-10-01

    Erosion damage, caused by repeated rain droplet impact on the leading edges of wind turbine blades, is a major cause for cost concern. Resin Infusion (RI) is used in wind energy blades where low weight and high mechanical performance materials are demanded. The surface coating plays a crucial role in the manufacturing and performance response. The Leading Edge coating is usually moulded, painted or sprayed onto the blade surface so adequate adhesion in the layers' characterization through the thickness is required for mechanical performance and durability reasons. In the current work, an investigation has been directed into the resulting rain erosion durability of the coating was undertaken through a combination of mass loss testing measurements with manufacturing processing parameter variations. The adhesion and erosion is affected by the shock wave caused by the collapsing water droplet on impact. The stress waves are transmitted to the substrate, so microestructural discontinuities in coating layers and interfaces play a key role on its degradation. Standard industrial systems are based on a multilayer system, with a high number of interfaces that tend to accelerate erosion by delamination. Analytical and numerical models are commonly used to relate lifetime prediction and to identify suitable coating and composite substrate combinations and their potential stress reduction on the interface. In this research, the input parameters for the appropriate definition of the Cohesive Zone Modelling (CZM) of the coating-substrate interface are outlined by means of Pull off testing and Peeling testing results. It allowed one to optimize manufacturing and coating process for blades into a knowledge-based guidance for leading edge coating material development. It was achieved by investigating the erosion degradation process using both numerical and laboratory techniques (Pull off, Peeling and Rain Erosion Testing in a whirling arm rain erosion test facility).

  4. [Sediment-yielding process and its mechanisms of slope erosion in wind-water erosion crisscross region of Loess Plateau, Northwest China].

    Science.gov (United States)

    Tuo, Deng-Feng; Xu, Ming-Xiang; Zheng, Shi-Qing; Li, Qiang

    2012-12-01

    Due to the coupling effects of wind and water erosions in the wind-water erosion crisscross region of Loess Plateau, the slope erosion in the region was quite serious, and the erosion process was quite complicated. By using wind tunnel combined with simulated rainfall, this paper studied the sediment-yielding process and its mechanisms of slope erosion under the effects of wind-water alternate erosion, and quantitatively analyzed the efffects of wind erosion on water erosion and the relationships between wind and water erosions. There was an obvious positive interaction between wind and water erosions. Wind erosion promoted the development of microtopography, and altered the quantitative relationship between the sediment-yielding under water erosion and the variation of rainfall intensity. At the rainfall intensity of 60 and 80 mm x h(-1), the sediment-yielding without wind erosion decreased with the duration of rainfall and tended to be stable, but the sediment-yielding with wind erosion decreased to a certain valley value first, and then showed an increasing trend. At the rainfall intensity of 60, 80, and 100 mm x h(-1), the sediment-yielding with the wind erosion at speeds of 11 and 14 m x s(-1) increased by 7.3%-27.9% and 23.2%-39.0%, respectively, as compared with the sediment-yielding without wind erosion. At the rainfall intensity of 120 and 150 mm x h(-1) and in the rainfall duration of 15 minutes, the sediment-yielding with and without wind erosion presented a decreasing trend, but, with the increase of rainfall duration, the sediment-yielding with wind erosion showed a trend of decreasing first and increasing then, as compared with the sediment-yielding without wind erosion. The mechanisms of wind-water alternate erosion were complicated, reflecting in the mutual relation and mutual promotion of wind erosion and water erosion in the aspects of temporal-spatial distribution, energy supply, and action mode of erosion forces.

  5. Wind erosion on heavy-textured soils: calculation and mapping

    Directory of Open Access Journals (Sweden)

    Jana Kozlovsky Dufková

    2011-01-01

    Full Text Available The equation that expresses the influence of factors affecting soil aggregates breakdown, and thus wind erosion, originated from the results of laboratory simulations of soil aggregates breakdown due to low temperatures treatment, field measurements of air temperature and soil moisture, and statistical evaluation of gained outcomes. All the analyses, whether field or laboratory, were realized on three different soils from three different localities of the Bílé Karpaty Mountains foothills – Ostrožská Nová Ves, Blatnice pod Svatým Antonínkem, and Suchá Loz. The statistically significant factors, influencing the soil aggregates breakdown, were determined using multiple regression analysis and stepwise regression. Soil moisture content at time of freezing was the most significant factor affecting soil aggregates breakdown, content of soil particles < 0.01 mm was the least significant one. Based on the results of laboratory and field research there was created a map of heavy-textured soils that are vulnerable to wind erosion.

  6. Near-surface meteorological conditions associated with active resuspension of dust by wind erosion

    Energy Technology Data Exchange (ETDEWEB)

    Hodgin, C.R.

    1982-01-01

    The meteorological conditions associated with extreme winds in the lee of the Colorado Rocky Mountains were studied from the viewpoint of dust resuspension and dispersion. Wind, dispersion, temperature, and dew point conditions occurring near the surface were discussed in detail for a selected event. Near-surface wind speeds were compared to observations made at a standard sampling height. These field data were developed to aid in validation and interpretation of wind tunnel observations and application of dispersion models to wind erosion resuspension. Three conclusions can immediately be drawn from this investigation. First, wind storms in nature are quite gusty, with gusts exceeding the mean speed by 50 percent or more. However, wind direction variations are small by comparison. Thus, wind tunnel studies should be able to simulate the large along-flow turbulence, while keeping cross-flow turbulence to a moderate level. This also has an application to the puff modeling of high winds. Puff models normally assume that the along-flow dispersion coefficient is equal to the cross-flow value. This study suggests that the along-flow coefficient should be much larger than its cross-flow counterpart. Another conclusion involves the usual assumption of Pasquill-Gifford stability class D. In the event studied here, the atmosphere was well mixed with near-neutral thermal stability, yet the horizontal dispersion stability class varied from G to A. Thus, an assumption of Class D horizontal dispersion during high winds would not have been valid during this case. A final conclusion involves the widely applied assumption of a logarithmic wind speed profile during high wind events. This study has indicated that such an assumption is appropriate.

  7. Development and validation of a method to estimate the potential wind erosion risk in Germany

    Science.gov (United States)

    Funk, Roger; Deumlich, Detlef; Völker, Lidia

    2017-04-01

    The introduction of the Cross Compliance (CC) regulations for soil protection resulted in the demand for the classification of the the wind erosion risk on agricultural areas in Germany nationwide. A spatial highly resolved method was needed based on uniform data sets and validation principles, which provides a fair and equivalent procedure for all affected farmers. A GIS-procedure was developed, which derives the site specific wind erosion risk from the main influencing factors: soil texture, wind velocity, wind direction and landscape structure following the German standard DIN 19706. The procedure enables different approaches in the Federal States and comparable classification results. Here, we present the approach of the Federal State of Brandenburg. In the first step a complete soil data map was composed in a grid size of 10 x 10 m. Data were taken from 1.) the Soil quality Appraisal (scale 1:10.000), 2.) the Medium-scale Soil Mapping (MMK, 1:25.000), 3.) extrapolating the MMK, 4.) new Soil quality Appraisal (new areas after coal-mining). Based on the texture and carbon content the wind erosion susceptibility was divided in 6 classes. This map was combined with data of the annual average wind velocity resulting in an increase of the risk classes for wind velocities > 5 ms-1 and a decrease for virtual shadows behind the landscape elements for eight directions. The relative frequency of wind from each direction was used as a weighting factor and multiplied with the numerical values of the shadowed cells. Depending on the distance to the landscape element the shadowing effect was combined with the risk classes. The results show that the wind erosion risk is obviously reduced by integrating landscape structures into the risk assessment. After the renewed classification for the entire Federal State, about 60% of the area in the highest, and 40% in the medium risk classes changed into lower classes. The area of the highest potential risk class decreased from 40% to

  8. Wind tunnel experiments on the effects of tillage ridge features on wind erosion horizontal fluxes

    Directory of Open Access Journals (Sweden)

    M. Kardous

    2005-11-01

    Full Text Available In addition to the well-known soil factors which control wind erosion on flat, unridged surfaces, two specific processes affect the susceptibility of tillage ridged surfaces to wind erosion: ridge-induced roughness and ridge- trapping efficiency. In order to parameterize horizontal soil fluxes produced by wind over tillage ridges, eight-ridge configurations composed of sandy soil and exhibiting ridge heights to ridge spacing (RH/RS ratios ranging from 0.18 to 0.38 were experimented in a wind tunnel. These experiments are used to develop a parameterization of the horizontal fluxes over tillage ridged surfaces based only on the geometric characteristics of the ridges. Indeed, the key parameters controlling the horizontal flux, namely the friction velocity, threshold friction velocity and the adjustment coefficient, are derived through specific expressions, from ridge heights (RH and ridge spacing (RS. This parameterization was evaluated by comparing the results of the simulations to an additional experimental data set and to the data set obtained by Hagen and Armbrust (1992. In both cases, predicted and measured values are found to be in a satisfying agreement. This parameterization was used to evaluate the efficiency of ridges in reducing wind erosion. The results show that ridged surfaces, when compared to a loose, unridged soil surface, lead to an important reduction in the horizontal fluxes (exceeding 60%. Moreover, the effect of ridges in trapping particles contributes for more than 90% in the flux reduction while the ridge roughness effect is weak and decreases when the wind velocity increases.

  9. Wind tunnel experiments on the effects of tillage ridge features on wind erosion horizontal fluxes

    Directory of Open Access Journals (Sweden)

    M. Kardous

    2005-11-01

    Full Text Available In addition to the well-known soil factors which control wind erosion on flat, unridged surfaces, two specific processes affect the susceptibility of tillage ridged surfaces to wind erosion: ridge-induced roughness and ridge- trapping efficiency.

    In order to parameterize horizontal soil fluxes produced by wind over tillage ridges, eight-ridge configurations composed of sandy soil and exhibiting ridge heights to ridge spacing (RH/RS ratios ranging from 0.18 to 0.38 were experimented in a wind tunnel. These experiments are used to develop a parameterization of the horizontal fluxes over tillage ridged surfaces based only on the geometric characteristics of the ridges. Indeed, the key parameters controlling the horizontal flux, namely the friction velocity, threshold friction velocity and the adjustment coefficient, are derived through specific expressions, from ridge heights (RH and ridge spacing (RS. This parameterization was evaluated by comparing the results of the simulations to an additional experimental data set and to the data set obtained by Hagen and Armbrust (1992. In both cases, predicted and measured values are found to be in a satisfying agreement.

    This parameterization was used to evaluate the efficiency of ridges in reducing wind erosion. The results show that ridged surfaces, when compared to a loose, unridged soil surface, lead to an important reduction in the horizontal fluxes (exceeding 60%. Moreover, the effect of ridges in trapping particles contributes for more than 90% in the flux reduction while the ridge roughness effect is weak and decreases when the wind velocity increases.

  10. The Reduction of Partitioned Wind and Water Erosion by Conservation Agriculture

    Science.gov (United States)

    Soil loss due to wind and water erosion degrades the soil and results in environmental problems downstream and downwind of the source field. Wind and water erosion may both occur to varying extents particularly in semi-arid environments. Soil conservation strategies require information about the p...

  11. Wind Erosion Processes and Control Techniques in the Sahelian Zone of Niger

    NARCIS (Netherlands)

    Sterk, G.; Stroosnijder, L.; Raats, P.A.C.

    1999-01-01

    Wind Erosion Processes and Control Techniques in the Sahelian Zone of Niger G. Sterk, L. Stroosnijder, and P.A.C. Raats Abstract The objective of this paper is to present the main results and conclusions from three years of field research on wind erosion processes and control techniques in the

  12. Farmers' perceptions of erosion by wind and water in northern Burkina Faso

    NARCIS (Netherlands)

    Visser, S.M.; Leenders, J.K.; Leeuwis, M.

    2003-01-01

    Wind and water erosion are widespread phenomena throughout the Sahel, especially in the early rainy season, when high-intensity rainstorms are often preceded by severe windstorms. This paper describes the results of a survey on the farmers' perceptions of wind and water erosion processes and control

  13. Wind erosion control with scattered vegetation in the Sahelian zone of Burkina Faso

    NARCIS (Netherlands)

    Leenders, J.K.

    2006-01-01

    The Sahelian zone ofAfricais the region that is globally most subjected to land degradation, with wind erosion being the most important soil degradation process. By using control measures, the negative effects of wind erosion can be reduced. At present, adoption of

  14. Effect of vegetation cover and transitions on regional wind erosion in drylands

    NARCIS (Netherlands)

    Youssef, I.F.

    2012-01-01

    Wind erosion is a critical environmental problem that threatens mainly the arid and semi-arid regions of our planet. Usually this problem is associated with desertification, poverty and other environmental and socioeconomic problems. Wind erosion causes the loss of fertile topsoil, and has a

  15. Estimating the offsite household damages from wind erosion in the western United States. Staff report

    Energy Technology Data Exchange (ETDEWEB)

    Piper, S.; Lee, L.K.

    1989-06-01

    Wind erosion contributes significantly to particulate air pollution in some regions of the Western United States. As a result, wind erosion imposes damages on households in the form of increased interior and exterior cleaning, reduced recreational opportunities, and impaired health. Costs are difficult to estimate because of limited data availability. However, damages appear to be much larger offsite than onsite.

  16. Research of wind erosion intensity in the region of Subotica-Horgos sands

    Science.gov (United States)

    Velizar Velasevic; Ljubomir Letic

    1991-01-01

    Wind is an important erosional process in the areas of steppe-savanna climate in Europe as typified by the Bojvodina plain in Yugoslavia. Cultivated and forested plots on the Subotica-Horgos Sands were used to study aeolian erosion processes. Wind erosion on the cultivated plot was 3-29 times greater than that occurring on a plot planted to forest trees. That erosion...

  17. Simulated effects of crop rotations and residue management on wind erosion in Wuchuan, west-central Inner Mongolia, China.

    Science.gov (United States)

    Wang, Erda; Harman, Wyatte L; Williams, Jimmy R; Xu, Cheng

    2002-01-01

    For decades, wind erosion has triggered dust and sand storms, buffeting Beijing and areas of northwestern China to the point of being hazardous to human health while rapidly eroding crop and livestock productivity. The EPIC (Environmental Policy Integrated Climate) field-scale simulation model was used to assess long-term effects of improved crop rotations and crop residue management practices on wind erosion in Wuchuan County in Inner Mongolia. Simulation results indicate that preserving crop stalks until land is prepared by zone tillage for the next year's crop in lieu of using them as a source of heating fuel or livestock fodder significantly reduces wind erosion by 60%. At the same time, grain and potato (Solanum tuberosum L.) yields were maintained or improved. Significant reductions in erosion, 35 to 46%, also resulted from delaying stalk removal until late January through late April. Yearly wind erosion was concentrated in April and May, the windiest months. Additionally, the use of alternative crop rotations resulted in differences in wind erosion, largely due to a difference in residue stature and quality and differences in biomass produced. As a result, altering current crop rotation systems by expanding corn (Zea mays L.), wheat (Triticum aestivum L.), and millet [Sorghum bicolor (L.) Moench] and reducing potato and pea (Pisum sativum L.) production significantly reduced simulated wind erosion, thus diminishing the severity of dust and sand storms in northwestern China. Saving and protecting topsoil over time will sustain land productivity and have long-term implications for improving conditions of rural poverty in the region.

  18. Drawing a representative sample from the NCSS soil database: Building blocks for the national wind erosion network

    Science.gov (United States)

    Developing national wind erosion models for the continental United States requires a comprehensive spatial representation of continuous soil particle size distributions (PSD) for model input. While the current coverage of soil survey is nearly complete, the most detailed particle size classes have c...

  19. Wind power prediction models

    Science.gov (United States)

    Levy, R.; Mcginness, H.

    1976-01-01

    Investigations were performed to predict the power available from the wind at the Goldstone, California, antenna site complex. The background for power prediction was derived from a statistical evaluation of available wind speed data records at this location and at nearby locations similarly situated within the Mojave desert. In addition to a model for power prediction over relatively long periods of time, an interim simulation model that produces sample wind speeds is described. The interim model furnishes uncorrelated sample speeds at hourly intervals that reproduce the statistical wind distribution at Goldstone. A stochastic simulation model to provide speed samples representative of both the statistical speed distributions and correlations is also discussed.

  20. Coastal erosion problem, modelling and protection

    Science.gov (United States)

    Yılmaz, Nihal; Balas, Lale; İnan, Asu

    2015-09-01

    Göksu Delta, located in the south of Silifke County of Mersin on the coastal plain formed by Göksu River, is one of the Specially Protected Areas in Turkey. Along the coastal area of the Delta, coastline changes at significant rates are observed, concentrating especially at four regions; headland of İncekum, coast of Paradeniz Lagoon, river mouth of Göksu and coast of Altınkum. The coast of Paradeniz Lagoon is suffering significantly from erosion and the consequent coastal retreating problem. Therefore, the narrow barrier beach which separates Paradeniz Lagoon from the Mediterranean Sea is getting narrower, creating a risk of uniting with the sea, thus causing the disappearance of the Lagoon. The aim of this study was to understand the coastal transport processes along the coastal area of Göksu Delta to determine the coastal sediment transport rates, and accordingly, to propose solutions to prevent the loss of coastal lands in the Delta. To this end, field measurements of currents and sediment grain sizes were carried out, and wind climate, wave climate, circulation patterns and longshore sediment transport rates were numerically modeled by HYDROTAM-3D, which is a three dimensional hydrodynamic transport model. Finally, considering its special importance as an environmentally protected region, some coastal structures of gabions were proposed as solutions against the coastal erosion problems of the Delta. The effects of proposed structures on future coastline changes were also modeled, and the coastlines predicted for the year 2017 are presented and discussed in the paper.

  1. [Influences of land using patterns on the anti-wind erosion of meadow grassland].

    Science.gov (United States)

    Zhou, Yao-Zhi; Wang-Xu; Yang, Gui-Xia; Xin, Xiao-Ping

    2008-05-01

    In order to analyse the effects of the human disturbances to the ability of anti-wind erosion of the Hulunbuir meadow grassland, the methods of vegetation investigation and the wind tunnel experiment were made to research the changes of vegetation and the abilities of anti-wind erosion of meadow grassland under different using patterns of meadow grassland. The results indicate that, under different grazing intensities of meadow grassland, the critical wind velocity of soil erosion (v) changes with the vegetation cover according to the relation of second power function. Along with the grazing intensities increasing and the vegetation cover reducing, the velocity of soil erosion rapidly increased on the condition of similar wind velocity which is speedier than the critical wind velocity of soil erosion. When the meadow grassland is mildly grazed which the vegetation cover maintains 63%, the velocity of soil erosion is small even there is gale that the wind velocity reach 25 m/s. When the vegetation cover of meadow grassland reduced to less than 35%, the velocity of soil erosion rapidly increased with the vegetation cover's reducing on the condition of the wind velocity is among 20-25 m/s. And owing to the no-tillage cropland of meadow grassland is completely far from the protection of the vegetation, the soil wind erosion quantity achieves 682.1 kg/hm2 in a minute when the wind velocity is 25 m/s, which approaches the average formation quantity of soil (1 000 kg/hm2) in a year.

  2. A New Instrument for Testing Wind Erosion by Soil Surface Shape Change

    Directory of Open Access Journals (Sweden)

    Chun-xing Hai

    2009-01-01

    Full Text Available Wind erosion, a primary cause of soil degeneration, is a problem in arid and semiarid areas throughout the world. Many methods are available to study soil erosion, but there is no an effective method for making quantitative measurements in the field. To solve this problem, we have developed a new instrument that can measure the change in the shape of the soil surface, allowing quick quantification of wind erosion. In this paper, the construction and principle of the new instrument are described. Field experiments are carried out using the instrument, and the data are analyzed. The erosion depth is found to vary by 11% compared to the average for measurement areas ranging from 30×30 cm2 to 10×10 cm2. The results show that the instrument is convenient and reliable for quantitatively measuring wind erosion in the field.

  3. Wind born(e) landscapes: the role of wind erosion in agricultural land management and nature development

    NARCIS (Netherlands)

    Riksen, M.J.P.M.

    2006-01-01

    Wind has played an important role in the geological development of the north-western Europe. Various aeolian deposits such as inland dunes, river dunes, cover sands, drift sands and coastal dunes, form the base of large areas in our present landscape. The role of wind erosion in today's north-west

  4. Emission factors for wind erosion of exposed aggregates at surface coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Cowherd, C.

    1982-06-01

    The information presented in this paper is directed to those interested in inventorying dust emissions generated by wind erosion of exposed aggregates at surface coal mines. A testing program is described which entailed the use of a portable wind tunnel and an isokinetic sampling system to measure windblown dust emissions from coal and overburden materials at three western mine sites. Test measurements consisted of particle mass emission rates and size distributions for various control wind speeds and times after the initiation of wind erosion. The results indicate that natural surface crusts are very effective in mitigating suspended dust emissions and that a given surface has a finite potential for wind erosion subsequent to mechanical disturbance. Test data are used to develop a predictive emission factor equation which relates emission rate (per unit surface area) to the frequency of disturbance and the erosion potential corresponding to the fastest mile of wind for the period between disturbances. This equation can be used directly for flat surfaces or it can be coupled with an analysis of wind flow patterns around elevated storage piles to develop dust emission estimates for overall pile erosion.

  5. Soil wind erosion in ecological olive trees in the Tabernas desert (southeastern Spain): a wind tunnel experiment

    Science.gov (United States)

    Asensio, Carlos; Lozano, Francisco Javier; Gallardo, Pedro; Giménez, Antonio

    2016-08-01

    Wind erosion is a key component of the soil degradation processes. The purpose of this study is to find out the influence of material loss from wind on soil properties for different soil types and changes in soil properties in olive groves when they are tilled. The study area is located in the north of the Tabernas Desert, in the province of Almería, southeastern Spain. It is one of the driest areas in Europe, with a semiarid thermo-Mediterranean type of climate. We used a new wind tunnel model over three different soil types (olive-cropped Calcisol, Cambisol and Luvisol) and studied micro-plot losses and deposits detected by an integrated laser scanner. We also studied the image processing possibilities for examining the particles attached to collector plates located at the end of the tunnel to determine their characteristics and whether they were applicable to the setup. Samples collected in the traps at the end of the tunnel were analyzed. We paid special attention to the influence of organic carbon, carbonate and clay contents because of their special impact on soil crusting and the wind-erodible fraction. A principal components analysis (PCA) was carried out to find any relations on generated dust properties and the intensity and behavior of those relationships. Component 1 separated data with high N and OC contents from samples high in fine silt, CO3= and available K content. Component 2 separated data with high coarse silt and clay contents from data with high fine sand content. Component 3 was an indicator of available P2O5 content. Analysis of variance (ANOVA) was carried out to analyze the effect of soil type and sampling height on different properties of trapped dust. Calculations based on tunnel data showed overestimation of erosion in soil types and calculation of the fraction of soil erodible by wind done by other authors for Spanish soils. As the highest loss was found in Cambisols, mainly due to the effect on soil crusting and the wind

  6. PM2.5 and PM10 Emission from agricultural soils by wind erosion

    Science.gov (United States)

    Soil tillage and wind erosion are a major source of particulate matter less than 2.5 and 10 µm (PM2.5 and PM10) emission from cultivated soil. Fifteen cultivated soils collected from 5 states were tested as crushed (<2.0 mm) and uncrushed (natural aggregation) at 8, 10, and 13 m s-1 wind velocity in...

  7. Soil erosion rates from mixed soil and gravel surfaces in a wind tunnel: A preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Ligotke, M.W.

    1988-12-01

    Tests of wind erosion were performed in a controlled-environment wind tunnel to support the development of natural-material protective barriers for long-term isolation of radioactive waste. Barrier performance standards currently being developed for internal and external barrier performance are expected to mandate a surface layer that is resistant to wind erosion. The purpose of this study was to initiate a series of tests to determine suitable soil and gravel mixtures for such a barrier and to test worst-case surface layer conditions under the influence of high wind speeds. Six mixed soil and gravel surfaces were prepared, weathered to represent natural wind-blown desert areas, and subjected to controlled wind erosion forces in a wind tunnel. The applied erosive forces, including surface shear forces, were characterized to provide a means of relating wind tunnel results with actual field conditions. Soil particle losses from the surfaces caused by suspension, saltation, and surface creep were monitored by aerosol sample probes and mass balance measurements. 23 refs., 22 figs., 3 tabs.

  8. Soil erosion rates from mixed soil and gravel surfaces in a wind tunnel: A preliminary report

    International Nuclear Information System (INIS)

    Ligotke, M.W.

    1988-12-01

    Tests of wind erosion were performed in a controlled-environment wind tunnel to support the development of natural-material protective barriers for long-term isolation of radioactive waste. Barrier performance standards currently being developed for internal and external barrier performance are expected to mandate a surface layer that is resistant to wind erosion. The purpose of this study was to initiate a series of tests to determine suitable soil and gravel mixtures for such a barrier and to test worst-case surface layer conditions under the influence of high wind speeds. Six mixed soil and gravel surfaces were prepared, weathered to represent natural wind-blown desert areas, and subjected to controlled wind erosion forces in a wind tunnel. The applied erosive forces, including surface shear forces, were characterized to provide a means of relating wind tunnel results with actual field conditions. Soil particle losses from the surfaces caused by suspension, saltation, and surface creep were monitored by aerosol sample probes and mass balance measurements. 23 refs., 22 figs., 3 tabs

  9. Type IV Wind Turbine Model

    DEFF Research Database (Denmark)

    Hansen, Anca Daniela; Margaris, Ioannis D.

    (WPP) will be considered. The aggregate WPP model, which will be based on the upscaling of the individual wind turbine model on the electrical part, will make use of an equivalent wind speed. The implemented model follows the basic structure of the generic standard Type 4 wind turbine model proposed...... by the International Electrotechnical Commission (IEC), in the IEC61400-27-1 Committee Draft for electrical simulation models for wind power generation, which is currently under review, [1]. The Type 4 wind turbine model described in this report includes a set of adjustments of the standard Type 4 wind turbine model...... project to be incorporated in the wind power plant level. This document describes the Type 4 wind turbine simulation model, implemented in the EaseWind project. The implemented wind turbine model is one of the initial necessary steps toward integrating new control services in the wind power plant level...

  10. The Methods of Locating Areas Exposed to Wind Erosion in the South Moravia Region

    Directory of Open Access Journals (Sweden)

    Jana Podhrázská

    2015-01-01

    Full Text Available The conditions for the development of wind erosion are determined by the soil and climatic conditions as well as by the presence or absence of wind barriers. It is because of its climatic and soil conditions that the territory of the South Moravia Region has been affected by erosion for centuries. Combined with the atmospheric conditions, the dry and warm climate enables the development of aeolian processes both in light, drying soils and – under certain climatic conditions – in heavy, clay-loam soils. Soil erosion exposure maps have been prepared in order to identify the territories which are potentially exposed to wind erosion in terms of the soil and climatic conditions. Six exposure categories have been applied to the soils. However, the impact of permanent vegetation barriers – line elements – must be considered in order to identify the most exposed areas. Protective forest belts were planted in the 1950s to counter the effects of wind erosion and they are included in the database of the Institute for Economic Forest Management. The network of these wind barriers and the heath condition of the individual elements are often unsatisfactory because of poor maintenance. The purpose of the study was to evaluate the spatial function of the network of protective forest belts using the map of the potential exposure of soil in the Region of South Moravia. The method used to evaluate the spatial function of the windbreaks presented in the study using GIS instruments.

  11. Evaluating the effectiveness of agricultural mulches for reducing post-wildfire wind erosion

    Science.gov (United States)

    Robichaud, P. R.; Jennewein, J.; Sharratt, B. S.; Lewis, S. A.; Brown, R. E.

    2017-08-01

    Post-wildfire soil erosion can be caused by water or aeolian processes, yet most erosion research has focused on predominantly water-driven erosion. This study investigates the effectiveness of three agricultural mulches, with and without a tackifier, on aeolian sediment transport processes. A wind tunnel was used to simulate post-wildfire wind erosion at three wind speeds (6, 11 and 18 m s-1). Shallow trays containing soil collected after a wildfire were treated with chopped rice, wheat or chopped wheat mulch; mulch treatments were also compounded with liquid treatments, tackifier to water ratios of 1:6, 1:3 and water. The mulch treatments were generally easily moved at all wind speeds with cover reductions greater than 90% at the highest wind speed. As expected, sediment loss was greatest for the bare soil treatment, ranging from 6.5 g m-2 at the lowest wind speed which increases to 6258 g m-2 at the highest wind speed. Adding wheat or chopped wheat mulch significantly reduced sediment loss by an order or magnitude (698 and 298 g m-2, respectively) at the highest wind speed. Adding chopped rice straw reduced sediment loss by a half to 3573 g m-2 at the highest wind speed, but the effect was not significant due to mobilization of the mulch. The most effective sediment loss mitigation was achieved with liquid tackifier treatments when applied to bare soil and when compounded with various mulch treatments, particularly at the highest wind speed. These results may aid management decisions when mitigating aeolian sediment transport after wildfires.

  12. Transfer equations for modeling interrill erosion

    OpenAIRE

    Nouhou bako, Amina; Darboux, Frédéric; James, François; Lucas, Carine

    2016-01-01

    Numerous models are available for matter transfer along an hillslope. They are usually process-specific, requiring to use several models to simulate transfers along an hillslope. To overcome this issue, we develop a new model valid for chemical (nutrients, pollutants, dissolved carbon) and particle transfers by water. It is able to simulate both interrill and rill erosion. This new equation encompasses the previous models of Gao et al. (2004), Hairsine and Rose (1992, 1991) and Lajeunesse et ...

  13. Effect of changes in some climatic factors on wind erosion risks – the case study of South Moravia

    Directory of Open Access Journals (Sweden)

    Jana Podhrázská

    2013-01-01

    Full Text Available The intensity of wind erosion is determined by climatic factors (wind direction and wind speed, precipitation, temperature, humidity, presence of negative temperatures, soil and geological factors (geological composition of the area, the size and shape of soil particles, soil moisture, soil structure, mechanical stability of soil, vegetation factors (vegetation cover, crop residues, geomorphological factors (shape and distribution of the slopes, the incidence planes and leeward sites and anthropogenic factors (length and orientation of land, farming, irrigation. Potential exposure of the wind erosion can be expressed through indexes of soil susceptibility to wind erosion in conjunction with the effects of climatic factors. In connection with the fluctuating values of climatic factors induced by climate changes, differences can be expected to occur also in the size of areas threatened by wind erosion. One of the areas, most endangered by wind erosion in the Czech Republic, is South Moravia. In this region there was performed the regionalization of localities, endangered by wind erosion. This paper presents results of analysis the erosion risks according to climatic and soil characteristics statistically processed for the period from 1901–1950. These are then compared with areas endangered by wind erosion that were established based on the updated set of climatic data and its statistical processing from the period of years 1961–2000. The results are processed into map outputs by using GIS.

  14. Using Cesium-137 technique to study the characteristics of different aspect of soil erosion in the Wind-water Erosion Crisscross Region on Loess Plateau of China

    Energy Technology Data Exchange (ETDEWEB)

    Li Mian E-mail: hnli-mian@163.com; Li Zhanbin; Liu Puling; Yao Wenyi

    2005-01-01

    The most serious soil erosion on Loess Plateau exists in the Wind-water Erosion Crisscross Region. In the past 20 years, the types and intensity of soil erosion and its temporal and spatial distribution were studied, but studies on the difference of soil erosion between slope aspects and slope positions in this area have no report. However, it is very important to analyze and evaluate quantitatively the characteristics of different aspects and positions of soil loss for the prevention and treatment of soil erosion in this area. The spatial pattern of net soil loss on 4 downslope transects in four aspects (east, west, south and north) on a typical Mao (round loess mound) in Liudaogou catchment in Wind-water Erosion Crisscross Region was measured in 2000 using the resident cesium-137 deficit technique. The purposes of this investigation were undertaken to determine whether or not {sup 137}Cs measurement would give a useful indication of the extent of soil loss and their characteristics from cultivated hillsides in different slope aspect and slope position in the study area. The results showed that the difference of soil erosion in different aspect was significant and the erosion rate was in this order: north>east>south>west. Compared with other areas, the difference of erosion rate between north hillside and south hillside was on the contrary, and the possible explanations could be the effect of wind erosion. Also, the percentage of wind erosion was estimated to be at least larger than 18% of total soil loss by comparing the difference of erosion amount in south hillside and north hillside. The erosion rates on different slope positions in all aspects were also different, the highest net soil loss occurred in the lower slope position, and the upper and middle slope positions were slight. The general trend of net soil loss on sloping surface was to increase in fluctuation with increasing downslope distance.

  15. Dust emission and soil loss due to anthropogenic activities by wind erosion simulations

    Science.gov (United States)

    Katra, Itzhak; Swet, Nitzan; Tanner, Smadar

    2017-04-01

    Wind erosion is major process of soil loss and air pollution by dust emission of clays, nutrients, and microorganisms. Many soils throughout the world are currently or potentially associated with dust emissions, especially in dryland zones. The research focuses on wind erosion in semi-arid soils (Northern Negev, Israel) that are subjected to increased human activities of urban development and agriculture. A boundary-layer wind tunnel has been used to study dust emission and soil loss by simulation and quantification of high-resolution wind processes. Field experiments were conducted in various surface types of dry loess soils. The experimental plots represent soils with long-term and short term influences of land uses such as agriculture (conventional and organic practices), grazing, and natural preserves. The wind tunnel was operated under various wind velocities that are above the threshold velocity of aeolian erosion. Total soil sediment and particulate matter (PM) fluxes were calculated. Topsoil samples from the experimental plots were analysed in the laboratory for physical and chemical characteristics including aggregation, organic matter, and high-resolution particle size distribution. The results showed variations in dust emission in response to surface types and winds to provide quantitative estimates of soil loss over time. Substantial loss of particulate matter that is management strategies as well as for PM loading to the atmosphere and air pollution.

  16. Contributions of solar-wind induced potential sputtering to the lunar surface erosion rate and it's exosphere

    Science.gov (United States)

    Alnussirat, S. T.; Barghouty, A. F.; Edmunson, J. E.; Sabra, M. S.; Rickman, D. L.

    2018-04-01

    Sputtering of lunar regolith by solar-wind protons and heavy ions with kinetic energies of about 1 keV/amu is an important erosive process that affects the lunar surface and exosphere. It plays an important role in changing the chemical composition and thickness of the surface layer, and in introducing material into the exosphere. Kinetic sputtering is well modeled and understood, but understanding of mechanisms of potential sputtering has lagged behind. In this study we differentiate the contributions of potential sputtering from the standard (kinetic) sputtering in changing the chemical composition and erosion rate of the lunar surface. Also we study the contribution of potential sputtering in developing the lunar exosphere. Our results show that potential sputtering enhances the total characteristic sputtering erosion rate by about 44%, and reduces sputtering time scales by the same amount. Potential sputtering also introduces more material into the lunar exosphere.

  17. Wind Erosion Induced Soil Degradation in Northern China: Status, Measures and Perspective

    Directory of Open Access Journals (Sweden)

    Zhongling Guo

    2014-12-01

    Full Text Available Soil degradation is one of the most serious ecological problems in the world. In arid and semi-arid northern China, soil degradation predominantly arises from wind erosion. Trends in soil degradation caused by wind erosion in northern China frequently change with human activities and climatic change. To decrease soil loss by wind erosion and enhance local ecosystems, the Chinese government has been encouraging residents to reduce wind-induced soil degradation through a series of national policies and several ecological projects, such as the Natural Forest Protection Program, the National Action Program to Combat Desertification, the “Three Norths” Shelter Forest System, the Beijing-Tianjin Sand Source Control Engineering Project, and the Grain for Green Project. All these were implemented a number of decades ago, and have thus created many land management practices and control techniques across different landscapes. These measures include conservation tillage, windbreak networks, checkerboard barriers, the Non-Watering and Tube-Protecting Planting Technique, afforestation, grassland enclosures, etc. As a result, the aeolian degradation of land has been controlled in many regions of arid and semiarid northern China. However, the challenge of mitigating and further reversing soil degradation caused by wind erosion still remains.

  18. Wind erosion potential influenced by tillage in an irrigated potato-sweet corn rotation in the Columbia Basin

    Science.gov (United States)

    Wind erosion is a concern within the Columbia Basin of the Inland Pacific Northwest (PNW) United States due to the sandy texture of soils and small amount of residue retained on the soil surface after harvest of vegetable crops like potato. This study assessed potential wind erosion of an irrigated ...

  19. Investigation of gas particle flow in an erosion wind tunnel

    Energy Technology Data Exchange (ETDEWEB)

    Tabakoff, W.; Hamed, A.; Beacher, B.

    1983-04-01

    Trajectories of small particles approaching the test specimen in an erosion tunnel are analytically determined. The two-dimensional equations of motion are solved for a spherical particle under the sole influence of aerodynamic drag. The two-dimensional gradients of gas properties in the flow field are determined by a numerical solution of the equations describing a compressible inviscid fluid. At one inlet condition, the trajectories are computed for coal ash particles of various sizes approaching test specimens at several orientations. Trends are identified in the approaching characteristics that may be related to the observed erosion. The results indicate that, for ash particles with diameters less than 10 ..mu..m, significant numbers are deflected away from the specimen. These particles would otherwise impact with the specimen if they had to resist the turning effect of the flow field.

  20. Evaluation of chemical stabilizers and windscreens for wind erosion control of uranium mill tailings

    Energy Technology Data Exchange (ETDEWEB)

    Elmore, M.R.; Hartley, J.N.

    1984-08-01

    Potential wind erosion of uranium mill tailings is a concern for the surface disposal of tailings at uranium mills. Wind-blown tailings may subsequently be redeposited on areas outside the impoundment. Pacific Northwest Laboratory (PNL) is investigating techniques for fugitive dust control at uranium mill tailings piles. Laboratory tests, including wind tunnel studies, were conducted to evaluate the relative effectiveness of 43 chemical stabilizers. Seventeen of the more promising stabilizers were applied to test plots on a uranium tailings pile at the American Nuclear Corporation-Gas Hills Project mill site in central Wyoming. The durabilities of these materials under actual site conditions were evaluated over time. In addition, field testing of commercially available windscreens was conducted. Test panels were constructed of eight different materials at the Wyoming test site to compare their durability. A second test site was established near PNL to evaluate the effectiveness of windscreens at reducing wind velocity, and thereby reduce the potential for wind erosion of mill tailings. Results of the laboratory land field tests of the chemical stabilizers and windscreens are presented, along with costs versus effectiveness of these techniques for control of wind erosion at mill tailings piles. 12 references, 4 figures, 6 tables.

  1. Modelling Wind for Wind Farm Layout Optimization Using Joint Distribution of Wind Speed and Wind Direction

    OpenAIRE

    Ju Feng; Wen Zhong Shen

    2015-01-01

    Reliable wind modelling is of crucial importance for wind farm development. The common practice of using sector-wise Weibull distributions has been found inappropriate for wind farm layout optimization. In this study, we propose a simple and easily implementable method to construct joint distributions of wind speed and wind direction, which is based on the parameters of sector-wise Weibull distributions and interpolations between direction sectors. It is applied to the wind measurement data a...

  2. Nutrient dynamics - wind and water erosion at the village scale in the Sahel

    NARCIS (Netherlands)

    Visser, S.M.; Sterk, G.

    2007-01-01

    The loss of nutrients by wind erosion is generally attributed to losses by suspension, since suspension selectively removes the finest particles. However, because the main mass of sediment is moved by saltation during an event, the main mass of nutrients is also moved by saltation. Nutrient losses

  3. Crop production and economic loss due to wind erosion in hot arid ecosystem of India

    Science.gov (United States)

    Santra, Priyabrata; Moharana, P. C.; Kumar, Mahesh; Soni, M. L.; Pandey, C. B.; Chaudhari, S. K.; Sikka, A. K.

    2017-10-01

    Wind erosion is a severe land degradation process in hot arid western India and affects the agricultural production system. It affects crop yield directly by damaging the crops through abrasion, burial, dust deposition etc. and indirectly by reducing soil fertility. In this study, an attempt was made to quantify the indirect impact of wind erosion process on crop production loss and associated economic loss in hot arid ecosystem of India. It has been observed that soil loss due to wind erosion varies from minimum 1.3 t ha-1 to maximum 83.3 t ha-1 as per the severity. Yield loss due to wind erosion was found maximum for groundnut (Arachis hypogea) (5-331 kg ha-1 yr-1), whereas minimum for moth bean (Vigna aconitifolia) (1-93 kg ha-1 yr-1). For pearl millet (Pennisetum glaucum), which covers a major portion of arable lands in western Rajasthan, the yield loss was found 3-195 kg ha-1 yr-1. Economic loss was found higher for groundnut and clusterbean (Cyamopsis tetragonoloba) than rest crops, which are about

  4. Consistency of wind erosion assessments across land use and land cover types: A critical analysis

    Science.gov (United States)

    In recent decades, large areas of rangeland have been converted to cropland or vice versa in the western United States and elsewhere in the world, driven largely by increased crop prices, loss of access to irrigation water, and agricultural expansion / contraction. Wind erosion and dust emissions ar...

  5. Fire and grazing effects on wind erosion, soil water content, and soil temperature.

    Science.gov (United States)

    Vermeire, Lance T; Wester, David B; Mitchell, Robert B; Fuhlendorf, Samuel D

    2005-01-01

    Selective grazing of burned patches can be intense if animal distribution is not controlled and may compound the independent effects of fire and grazing on soil characteristics. Our objectives were to quantify the effects of patch burning and grazing on wind erosion, soil water content, and soil temperature in sand sagebrush (Artemisia filifolia Torr.) mixed prairie. We selected 24, 4-ha plots near Woodward, OK. Four plots were burned during autumn (mid-November) and four during spring (mid-April), and four served as nonburned controls for each of two years. Cattle were given unrestricted access (April-September) to burned patches (erosion, soil water content, and soil temperature were measured monthly. Wind erosion varied by burn, year, and sampling height. Wind erosion was about 2 to 48 times greater on autumn-burned plots than nonburned plots during the dormant period (December-April). Growing-season (April-August) erosion was greatest during spring. Erosion of spring-burned sites was double that of nonburned sites both years. Growing-season erosion from autumn-burned sites was similar to nonburned sites except for one year with a dry April-May. Soil water content was unaffected by patch burn treatments. Soils of burned plots were 1 to 3 degrees C warmer than those of nonburned plots, based on mid-day measurements. Lower water holding and deep percolation capacity of sandy soils probably moderated effects on soil water content and soil temperature. Despite poor growing conditions following fire and heavy selective grazing of burned patches, no blowouts or drifts were observed.

  6. Estimation model of soil freeze-thaw erosion in Silingco watershed wetland of Northern Tibet.

    Science.gov (United States)

    Kong, Bo; Yu, Huan

    2013-01-01

    The freeze-thaw (FT) erosion is a type of soil erosion like water erosion and wind erosion. Limited by many factors, the grading evaluation of soil FT erosion quantities is not well studied. Based on the comprehensive analysis of the evaluation indices of soil FT erosion, we for the first time utilized the sensitivity of microwave remote sensing technology to soil moisture for identification of FT state. We established an estimation model suitable to evaluate the soil FT erosion quantity in Silingco watershed wetland of Northern Tibet using weighted summation method of six impact factors including the annual FT cycle days, average diurnal FT phase-changed water content, average annual precipitation, slope, aspect, and vegetation coverage. Finally, with the support of GIS, we classified soil FT erosion quantity in Silingco watershed wetland. The results showed that soil FT erosion are distributed in broad areas of Silingco watershed wetland. Different soil FT erosions with different intensities have evidently different spatial and geographical distributions.

  7. Accelerated rain erosion of wind turbine blade coatings

    OpenAIRE

    Zhang, Shizhong; Kiil, Søren; Dam-Johansen, Kim; Bernad Jr., Pablo L.

    2014-01-01

    Under drift udsættes de hurtigt roterende vinger på vindmøller for gentagne kollisioner med regndråber, hagl, insekter eller partikler. Det kan føre til erosion af vingerne, hvilket går udover den elektriske effektivitet, og dyre reparationer kan blive nødvendige. En mulig løsning på dette problem er elastiske vingecoatings, der er i stand til at absorbere kollisionsenergien uden at revner eller andre skader dannes. Formålet med arbejdet, der præsenteres i denne afhandling, har været at desig...

  8. Does a more sophisticated storm erosion model improve probabilistic erosion estimates?

    NARCIS (Netherlands)

    Ranasinghe, R.W.M.R.J.B.; Callaghan, D.; Roelvink, D.

    2013-01-01

    The dependency between the accuracy/uncertainty of storm erosion exceedance estimates obtained via a probabilistic model and the level of sophistication of the structural function (storm erosion model) embedded in the probabilistic model is assessed via the application of Callaghan et al.'s (2008)

  9. Environmental risks associated to wind erosion in a metal mining area from SE Spain

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Fernandez, G.; Romero Diaz, A.

    2009-07-01

    Soils and mining wastes from the Mediterranean mining area placed in the Sierra Minera Mountains are highly enriched in heavy metals such as lead and zinc, but also other metals such as cadmium and arsenic. Wind erosion in this area could be considered extremely high and hazards associated to this eroded sediments seems to be high because the huge amount of metals present in this wastes. Therefore, combination of high erosion rates and high metal concentration in this mining waste, make those environmental risks can be considered high for the surrounding ecosystems, but also for public health of the nearby villages and towns. In order, to study these wind erosion processes over these mining materials, some experiments for the evaluation of the transportation of soil particles were carried out. Erosion rates in this realm is particularly important during spring months, when increased activity of the eastern winds brings intense soil dragging, with strong effects on the metals dispersion, including the massive removal of sediments. (Author) 16 refs.

  10. Effects of stubble and mulching on soil erosion by wind in semi-arid China

    Science.gov (United States)

    Cong, Peifei; Yin, Guanghua; Gu, Jian

    2016-07-01

    Soil erosion is a growing challenge for agricultural production in Northern China. To explore the effect of variation in stubble height and mulching biomass on soil erosion caused by wind, we conducted a field experiment using a quadratic rotation combination design. Results showed that the quantity of straw mulch was the dominant factor affecting soil erosion, and stubble height was of secondary importance. The soil water content in stubble and straw mulching treatments was higher than in a control treatment at 0-20 cm soil, and the tendency in the amount of soil water content was opposite to the amount of wind erosion (r = -0.882, n = 10, p mulch treatments at the 15-20 cm depth was higher than the change from 0-5 cm to 5-10 cm. Combined, the influence of a stubble height of 34 cm and mulch quantity of 4260 kg·ha-1 lowered the amount of erosion to 0.42 t·ha-1, and increased the corn yield to 11900 kg·ha-1. We determined that those were the most appropriate levels of stubble height and straw mulch for crop fields in the semi-arid regions of Northern China.

  11. Effects of stubble and mulching on soil erosion by wind in semi-arid China.

    Science.gov (United States)

    Cong, Peifei; Yin, Guanghua; Gu, Jian

    2016-07-18

    Soil erosion is a growing challenge for agricultural production in Northern China. To explore the effect of variation in stubble height and mulching biomass on soil erosion caused by wind, we conducted a field experiment using a quadratic rotation combination design. Results showed that the quantity of straw mulch was the dominant factor affecting soil erosion, and stubble height was of secondary importance. The soil water content in stubble and straw mulching treatments was higher than in a control treatment at 0-20 cm soil, and the tendency in the amount of soil water content was opposite to the amount of wind erosion (r = -0.882, n = 10, p soil water content observed in the stubble and mulch treatments at the 15-20 cm depth was higher than the change from 0-5 cm to 5-10 cm. Combined, the influence of a stubble height of 34 cm and mulch quantity of 4260 kg·ha(-1) lowered the amount of erosion to 0.42 t·ha(-1), and increased the corn yield to 11900 kg·ha(-1). We determined that those were the most appropriate levels of stubble height and straw mulch for crop fields in the semi-arid regions of Northern China.

  12. Wind erosion reduces soil organic carbon sequestration falsely indicating ineffective management practices

    Science.gov (United States)

    Chappell, Adrian; Baldock, Jeffrey A.

    2016-09-01

    Improved management of agricultural land has the potential to reduce greenhouse gas emissions and to reduce atmospheric CO2 via soil carbon sequestration. However, SOC stocks are reduced by soil erosion which is commonly omitted from calculations of crop production, C cycling, C sequestration and C accounting. We used fields from the wind eroded dryland cropping region of Western Australia to demonstrate the global implications for C sequestration and C accounting of omitting soil erosion. For the fields we previously estimated mean net (1950s-1990) soil erosion of 1.2 ± 1.0 t ha-1 y-1. The mean net (1990-2013) soil erosion increased by nearly four times to 4.4 ± 2.1 t ha-1 y-1. Conservation agriculture has evidently not reduced wind erosion in this region. The mean net (1990-2013) SOC erosion was up to 0.2 t C ha-1 y-1 across all sampled fields and similar to measured sequestration rates in the region (up to 0.5 t C ha-1 y-1; 10 years) for many management practices recommended for building SOC stocks. The minimum detectable change (MDC; 10 years) of SOC without erosion was up to 0.2 t C ha-1 y-1 whilst the MDC of SOC with erosion was up to 0.4 t C ha-1 y-1. These results illustrate the generally applicable outcome: (i) if SOC erosion is equal to (or greater than) the increase in SOC due to management practices, the change will not be detectable (or a loss will be evident); (ii) without including soil erosion in SOC sequestration calculations, the monitoring of SOC stocks will lead to, at best the inability to detect change and, at worst the false impression that management practices have failed to store SOC. Furthermore, continued omission of soil erosion in crop production, C accounting and C sequestration will most likely undermine confidence in policy designed to encourage adoption of C farming and the attendant benefits for soil stewardship and food security.

  13. Wind Farms: Modeling and Control

    DEFF Research Database (Denmark)

    Soleimanzadeh, Maryam

    2012-01-01

    is minimized. The controller is practically feasible. Yet, the results on load reduction in this approach are not very significant. In the second strategy, the wind farm control problem has been divided into below rated and above rated wind speed conditions. In the above rated wind speed pitch angle and power....... Distributed controller design commences with formulating the problem, where a structured matrix approach has been put in to practice. Afterwards, an H2 control problem is implemented to obtain the controller dynamics for a wind farm such that the structural loads on wind turbines are minimized.......The primary purpose of this work is to develop control algorithms for wind farms to optimize the power production and augment the lifetime of wind turbines in wind farms. In this regard, a dynamical model for wind farms was required to be the basis of the controller design. In the first stage...

  14. Predicción de la erosión eólica potencial con el modelo EWEQ en dos suelos loesicos: efectos de las condiciones climáticas Wind erosion prediction with the EWEQ model in two loess soils: effects of climatic condition

    Directory of Open Access Journals (Sweden)

    Silvia Beatriz Aimar

    2011-12-01

    Full Text Available La erosión eólica potencial del suelo (EEP es un dato básico utilizado en varios modelos de predicción para calcular la erosión eólica de suelos agrícolas. El objetivo de este estudio fue cuantificar la EEP de un Haplustol y un Ustipsammente de la Región Semiárida Pampeana (RSP y compararla con las predicciones del modelo Ecuación de Erosión Eólica en Español (EWEQ, realizadas con diferentes factores climáticos (C. Se efectuaron mediciones de EEP a campo durante un año en ambos suelos, mantenidos sin cobertura y con mínima rugosidad. Los resultados indicaron que la EEP medida a campo fue mayor en el Ustipsammente (270 Mg ha-1 año-1 que en el Haplustol (40 Mg ha-1 año -1 , con una reducción en el espesor del horizonte de 21,3 y 3,1 mm, respectivamente. La erosión del Ustipsammente fue dos veces mayor en primavera-verano que en otoño-invierno. Este efecto no se observó en el Haplustol, debido a su menor desecamiento y mayores contenidos de humedad luego de las lluvias. La erosión del Haplustol, por desecarse más lentamente luego de una lluvia, fue más condicionada por las precipitaciones que la del Ustipsammente. Un 40% de la erosión de ambos suelos fue definida por la duración de las tormentas. Las tasas de erosión (EEP por unidad de tiempo, Qt se correlacionaron positivamente con la velocidad promedio del viento (V, ajustando a una función polinómica en ambos suelos. A la misma V, Qt fue siempre mayor en el Ustipsammente. La EEP calculada con la EWEQ, utilizando el factor C correspondiente al año de muestreo (30,3, fue la más semejante a la erosión medida a campo, aunque el modelo la subestimó en un 43% en el Haplustol y en un 18% en el Ustipsammente. La EWEQ deberá ofrecer al usuario distintos factores C para poder predecir EEP en escenarios climáticos variables.The potential wind erosion of a soil (EEP is a basic data for predicting wind erosion of agricultural soils in most wind erosion prediction models

  15. Potential for monitoring soil erosion features and soil erosion modeling components from remotely sensed data

    Science.gov (United States)

    Langran, K. J.

    1983-01-01

    Accurate estimates of soil erosion and its effects on soil productivity are essential in agricultural decision making and planning from the field scale to the national level. Erosion models have been primarily developed for designing erosion control systems, predicting sediment yield for reservoir design, predicting sediment transport, and simulating water quality. New models proposed are more comprehensive in that the necessary components (hydrology, erosion-sedimentation, nutrient cycling, tillage, etc.) are linked in a model appropriate for studying the erosion-productivity problem. Recent developments in remote sensing systems, such as Landsat Thematic Mapper, Shuttle Imaging Radar (SIR-B), etc., can contribute significantly to the future development and operational use of these models.

  16. Validation of a probabilistic post-fire erosion model

    Science.gov (United States)

    Pete Robichaud; William J. Elliot; Sarah A. Lewis; Mary Ellen Miller

    2016-01-01

    Post-fire increases of runoff and erosion often occur and land managers need tools to be able to project the increased risk. The Erosion Risk Management Tool (ERMiT) uses the Water Erosion Prediction Project (WEPP) model as the underlying processor. ERMiT predicts the probability of a given amount of hillslope sediment delivery from a single rainfall or...

  17. Wind speed dynamical model in a wind farm

    DEFF Research Database (Denmark)

    Soleimanzadeh, Maryam; Wisniewski, Rafal

    2010-01-01

    , the dynamic model for wind flow will be established. The state space variables are determined based on a fine mesh defined for the farm. The end goal of this method is to assist the development of a dynamical model of a wind farm that can be engaged for better wind farm control strategies.......This paper presents a model for wind speed in a wind farm. The basic purpose of the paper is to calculate approximately the wind speed in the vicinity of each wind turbine in a farm. In this regard the governing equations of flow will be solved for the whole wind farm. In ideal circumstances...

  18. Keeping up with coal technology. Minimizing frozen-coal, wind-erosion problems

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    A freeze-conditioning agent is described which reduces the strength of the ice which forms on coal. The product has MSHA approval for use in U.S. underground mines. Coal losses from wind erosion during transit can be reduced by use of chemical crusting agents or car covers, or by the addition of several inches of large lumps of coal on top of the smaller particles.

  19. A universal meteorological method to identify potential risk of wind erosion on heavy-textured soils

    Directory of Open Access Journals (Sweden)

    Středová Hana

    2015-06-01

    Full Text Available The climate of Central Europe, mainly winter seasons with no snow cover at lower altitudes and a spring drought as well, might cause erosion events on heavy-textured soils. The aim of this paper is to define a universal method to identify the potential risk of wind erosion on heavy-textured soils. The categorization of potential wind erosion risk due to meteorological conditions is based on: (i an evaluation of the number of freeze-thaw episodes forming bare soil surfaces during the cold period of year; and (ii, an evaluation of the number of days with wet soil surfaces during the cold period of year. In the period 2001–2012 (from November to March, episodes with temperature changes from positive to negative and vice versa (thaw-freeze and freeze-thaw cycles and the effects of wet soil surfaces in connection with aggregate disintegration, are identified. The data are spatially interpolated by GIS tools for areas in the Czech Republic with heavy-textured soils. Blending critical categories is used to locate potential risks. The level of risk is divided into six classes. Those areas identified as potentially most vulnerable are the same localities where the highest number of erosive episodes on heavy-textured soils was documented.

  20. Modelling pulsar wind nebulae

    CERN Document Server

    2017-01-01

    In view of the current and forthcoming observational data on pulsar wind nebulae, this book offers an assessment of the theoretical state of the art of modelling them. The expert authors also review the observational status of the field and provide an outlook for future developments. During the last few years, significant progress on the study of pulsar wind nebulae (PWNe) has been attained both from a theoretical and an observational perspective, perhaps focusing on the closest, more energetic, and best studied nebula: the Crab, which appears in the cover. Now, the number of TeV detected PWNe is similar to the number of characterized nebulae observed at other frequencies over decades of observations. And in just a few years, the Cherenkov Telescope Array will increase this number to several hundreds, actually providing an essentially complete account of TeV emitting PWNe in the Galaxy. At the other end of the multi-frequency spectrum, the SKA and its pathfinder instruments, will reveal thousands of new pulsa...

  1. Modeling erosion from forest roads with WEPP

    Science.gov (United States)

    J. McFero Grace

    2007-01-01

    Forest roads can be major sources of soil erosion from forest watersheds. Sediments from forest roads are a concern due to their potential delivery to stream systems resulting in degradation of water quality. The Water Erosion Prediction Project (WEPP) was used to predict erosion from forest road components under different management practices. WEPP estimates are...

  2. Glyphosate and AMPA contents in sediments produced by wind erosion of agricultural soils in Argentina

    Science.gov (United States)

    Aparicio, Virginia; Aimar, Silvia; De Gerónimo, Eduardo; Buschiazzo, Daniel; Mendez, Mariano; Costa, José Luis

    2014-05-01

    Wind erosion of soils is an important event in arid and semiarid regions of Argentina. The magnitude of wind erosion occurring under different management practices is relatively well known in this region but less information is available on the quality of the eroded material. Considering that the intensification of agriculture may increase the concentrations of substances in the eroded material, producing potential negative effects on the environment, we analyzed the amount of glyphosate and AMPA in sediments produced by wind erosion of agricultural soils of Argentina. Wind eroded materials were collected by means of BSNE samplers in two loess sites of the semiarid region of Argentina: Chaco and La Pampa. Samples were collected from 1 ha square fields at 13.5, 50 and 150 cm height. Results showed that at higher heights the concentrations of glyphosate and AMPA were mostly higher. The glyphosate concentration was more variable and higher in Chaco (0.66 to 313 µg kg-1) than in La Pampa (4.17 to 114 µg kg-1). These results may be due to the higher use of herbicides in Chaco, where the predominant crops are soybeans and corn, produced under no-tillage. Under these conditions the use of glyphosate for weeds control is a common practice. Conversely, AMPA concentrations were higher in La Pampa (13.1 to 101.3 µg kg-1) than in Chaco (1.3 to 83 µg kg-1). These preliminary results show high concentrations of glyphosate and AMPA in wind eroded materials of agricultural soils of Argentina. More research is needed to confirm these high concentrations in other conditions in order to detect the temporal and spatial distribution patterns of the herbicide.

  3. Wind-Driven Erosion and Exposure Potential at Mars 2020 Rover Candidate-Landing Sites

    Science.gov (United States)

    Chojnacki, Matthew; Banks, Maria; Urso, Anna

    2018-01-01

    Aeolian processes have likely been the predominant geomorphic agent for most of Mars’ history and have the potential to produce relatively young exposure ages for geologic units. Thus, identifying local evidence for aeolian erosion is highly relevant to the selection of landing sites for future missions, such as the Mars 2020 Rover mission that aims to explore astrobiologically relevant ancient environments. Here we investigate wind-driven activity at eight Mars 2020 candidate-landing sites to constrain erosion potential at these locations. To demonstrate our methods, we found that contemporary dune-derived abrasion rates were in agreement with rover-derived exhumation rates at Gale crater and could be employed elsewhere. The Holden crater candidate site was interpreted to have low contemporary erosion rates, based on the presence of a thick sand coverage of static ripples. Active ripples at the Eberswalde and southwest Melas sites may account for local erosion and the dearth of small craters. Moderate-flux regional dunes near Mawrth Vallis were deemed unrepresentative of the candidate site, which is interpreted to currently be experiencing low levels of erosion. The Nili Fossae site displayed the most unambiguous evidence for local sand transport and erosion, likely yielding relatively young exposure ages. The downselected Jezero crater and northeast Syrtis sites had high-flux neighboring dunes and exhibited substantial evidence for sediment pathways across their ellipses. Both sites had relatively high estimated abrasion rates, which would yield young exposure ages. The downselected Columbia Hills site lacked evidence for sand movement, and contemporary local erosion rates are estimated to be relatively low. PMID:29568719

  4. Wind-Driven Erosion and Exposure Potential at Mars 2020 Rover Candidate-Landing Sites

    Science.gov (United States)

    Chojnacki, Matthew; Banks, Maria; Urso, Anna

    2018-02-01

    Aeolian processes have likely been the predominant geomorphic agent for most of Mars' history and have the potential to produce relatively young exposure ages for geologic units. Thus, identifying local evidence for aeolian erosion is highly relevant to the selection of landing sites for future missions, such as the Mars 2020 Rover mission that aims to explore astrobiologically relevant ancient environments. Here we investigate wind-driven activity at eight Mars 2020 candidate-landing sites to constrain erosion potential at these locations. To demonstrate our methods, we found that contemporary dune-derived abrasion rates were in agreement with rover-derived exhumation rates at Gale crater and could be employed elsewhere. The Holden crater candidate site was interpreted to have low contemporary erosion rates, based on the presence of a thick sand coverage of static ripples. Active ripples at the Eberswalde and southwest Melas sites may account for local erosion and the dearth of small craters. Moderate-flux regional dunes near Mawrth Vallis were deemed unrepresentative of the candidate site, which is interpreted to currently be experiencing low levels of erosion. The Nili Fossae site displayed the most unambiguous evidence for local sand transport and erosion, likely yielding relatively young exposure ages. The downselected Jezero crater and northeast Syrtis sites had high-flux neighboring dunes and exhibited substantial evidence for sediment pathways across their ellipses. Both sites had relatively high estimated abrasion rates, which would yield young exposure ages. The downselected Columbia Hills site lacked evidence for sand movement, and contemporary local erosion rates are estimated to be relatively low.

  5. Wind-Driven Erosion and Exposure Potential at Mars 2020 Rover Candidate-Landing Sites.

    Science.gov (United States)

    Chojnacki, Matthew; Banks, Maria; Urso, Anna

    2018-02-01

    Aeolian processes have likely been the predominant geomorphic agent for most of Mars' history and have the potential to produce relatively young exposure ages for geologic units. Thus, identifying local evidence for aeolian erosion is highly relevant to the selection of landing sites for future missions, such as the Mars 2020 Rover mission that aims to explore astrobiologically relevant ancient environments. Here we investigate wind-driven activity at eight Mars 2020 candidate-landing sites to constrain erosion potential at these locations. To demonstrate our methods, we found that contemporary dune-derived abrasion rates were in agreement with rover-derived exhumation rates at Gale crater and could be employed elsewhere. The Holden crater candidate site was interpreted to have low contemporary erosion rates, based on the presence of a thick sand coverage of static ripples. Active ripples at the Eberswalde and southwest Melas sites may account for local erosion and the dearth of small craters. Moderate-flux regional dunes near Mawrth Vallis were deemed unrepresentative of the candidate site, which is interpreted to currently be experiencing low levels of erosion. The Nili Fossae site displayed the most unambiguous evidence for local sand transport and erosion, likely yielding relatively young exposure ages. The downselected Jezero crater and northeast Syrtis sites had high-flux neighboring dunes and exhibited substantial evidence for sediment pathways across their ellipses. Both sites had relatively high estimated abrasion rates, which would yield young exposure ages. The downselected Columbia Hills site lacked evidence for sand movement, and contemporary local erosion rates are estimated to be relatively low.

  6. Erosivity, surface runoff, and soil erosion estimation using GIS-coupled runoff-erosion model in the Mamuaba catchment, Brazil.

    Science.gov (United States)

    Marques da Silva, Richarde; Guimarães Santos, Celso Augusto; Carneiro de Lima Silva, Valeriano; Pereira e Silva, Leonardo

    2013-11-01

    This study evaluates erosivity, surface runoff generation, and soil erosion rates for Mamuaba catchment, sub-catchment of Gramame River basin (Brazil) by using the ArcView Soil and Water Assessment Tool (AvSWAT) model. Calibration and validation of the model was performed on monthly basis, and it could simulate surface runoff and soil erosion to a good level of accuracy. Daily rainfall data between 1969 and 1989 from six rain gauges were used, and the monthly rainfall erosivity of each station was computed for all the studied years. In order to evaluate the calibration and validation of the model, monthly runoff data between January 1978 and April 1982 from one runoff gauge were used as well. The estimated soil loss rates were also realistic when compared to what can be observed in the field and to results from previous studies around of catchment. The long-term average soil loss was estimated at 9.4 t ha(-1) year(-1); most of the area of the catchment (60%) was predicted to suffer from a low- to moderate-erosion risk (soil erosion was estimated to exceed > 12 t ha(-1) year(-1). Expectedly, estimated soil loss was significantly correlated with measured rainfall and simulated surface runoff. Based on the estimated soil loss rates, the catchment was divided into four priority categories (low, moderate, high and very high) for conservation intervention. The study demonstrates that the AvSWAT model provides a useful tool for soil erosion assessment from catchments and facilitates the planning for a sustainable land management in northeastern Brazil.

  7. Advances in Predicting Soil Erosion After Fire Using the Rangeland Hydrology and Erosion Model

    Science.gov (United States)

    Al-Hamdan, Osama Z.; Pierson, Frederick B.; Nearing, Mark A.; Williams, C. Jason; Hernandez, Mariano; Boll, Jan; Nouwakpo, Sayjro; Weltz, Mark A.; Spaeth, Kenneth E.

    2017-04-01

    The magnitude of erosion from a hillslope is governed by the availability of sediment and connectivity of overland flow and erosion processes. For undisturbed conditions, sediment is mainly detached and transported by rainsplash and sheetflow (splash-sheet) processes in bare batches, but sediment generally only travels a short distance before deposition. On recently disturbed sites (e.g., after fire), bare ground is more extensive and runoff and erosion rates are higher relative to undisturbed conditions. Increased erosion following disturbance occurs largely due to a shift from splash-sheet to concentrated-flow-dominated processes. On long-disturbed sites (e.g., after woody plant encroachment), years of soil loss can limit sediment availability and soil erosion. In contrast, recently burned landscapes typically have ample sediment available and generate high erosion rates. This presentation highlights recent advancements in hillslope erosion prediction by the Rangeland Hydrology and Erosion Model (RHEM) that accommodate recently burned conditions. The RHEM tool is a process-based model that was developed specifically for predicting hillslope runoff and erosion on rangeland ecosystems. The advancements presented here include development of empirical equations to predict erodibility parameters for conditions in which erosion by concentrated flow processes is limited (by runoff or sediment availability) and an erodibility parameter for conditions in which erosion by concentrated flow processes is the dominant erosion mechanism and sediment is amply available (burned conditions). The data used for developing and evaluating the erodibility parameter equations were obtained from rainfall simulation databases maintained by the USDA-Agricultural Research Service. The data span undisturbed, long-disturbed, and recently burned conditions. For undisturbed and long-disturbed conditions, a regression analysis was applied to derive the relationship between splash

  8. Modeling of Wind Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Spacil, D.; Santarius, P. [VSB - Technical University of Ostrava, Department of Electrical Measurement, FEECS, 17. listopadu 15, 708 33 Ostrava- Poruba (Czech Republic); Dobrucky, B. [University of Zilina, Department of Mechatronics and Electronics, FEE, Univerzitna 1, 010 26 Zilina (Slovakia)

    2006-07-01

    The electrical power produced by the wind power plant has increased in the last years in the world and probably will increase further in the future. Therefore, wind power plants have a significant influence on the power production. In this article the connection of the wind turbine to a grid is described in order to determine the impact of the existing wind turbines as well as planned wind turbines on the grid and ensure the proper functioning of the wind turbine. The purpose of the presented work is to find an analytical generator model for the simulation of the wind power plant and determine the influence on the grid by programming with Matlab/Simulink.

  9. A 137Cs erosion model with moving boundary

    International Nuclear Information System (INIS)

    Yin, Chuan; Ji, Hongbing

    2015-01-01

    A novel quantitative model of the relationship between diffused concentration changes and erosion rates using assessment of soil losses was developed. It derived from the analysis of surface soil 137 Cs flux variation under persistent erosion effect and based on the principle of geochemistry kinetics moving boundary. The new moving boundary model improves the basic simplified transport model (Zhang et al., 2008), and mainly applies to uniform rainfall areas which show a long-time soil erosion. The simulation results for this kind of erosion show under a long-time soil erosion, the influence of 137 Cs concentration will decrease exponentially with increasing depth. Using the new model fit to the measured 137 Cs depth distribution data in Zunyi site, Guizhou Province, China which has typical uniform rainfall provided a good fit with R 2  = 0.92. To compare the soil erosion rates calculated by the simple transport model and the new model, we take the Kaixian reference profile as example. The soil losses estimated by the previous simplified transport model are greater than those estimated by the new moving boundary model, which is consistent with our expectations. - Highlights: • The diffused moving boundary principle analysing 137 Cs flux variation. • The new erosion model applies to uniform rainfall areas. • The erosion effect on 137 Cs will decrease exponentially with increasing depth. • The new model provides two methods of calculating erosion rate.

  10. Climatological changing effects on wind, precipitation and erosion: Large, meso and small scale analysis

    International Nuclear Information System (INIS)

    Aslan, Z.

    2004-01-01

    The Fourier transformation analysis for monthly average values of meteorological parameters has been considered, and amplitudes, phase angles have been calculated by using ground measurements in Turkey. The first order harmonics of meteorological parameters show large scale effects, while higher order harmonics show the effects of small scale fluctuations. The variations of first through sixth order harmonic amplitudes and phases provide a useful means of understanding the large and local scale effects on meteorological parameters. The phase angle can be used to determine the time of year the maximum or minimum of a given harmonic occurs. The analysis helps us to distinguish different pressure, relative humidity, temperature, precipitation and wind speed regimes and transition regions. Local and large scale phenomenon and some unusual seasonal patterns are also defined near Keban Dam and the irrigation area. Analysis of precipitation based on long term data shows that semi-annual fluctuations are predominant in the study area. Similarly, pressure variations are mostly influenced by semi-annual fluctuations. Temperature and humidity variations are mostly influenced by meso and micro scale fluctuations. Many large and meso scale climate change simulations for the 21st century are based on concentration of green house gases. A better understanding of these effects on soil erosion is necessary to determine social, economic and other impacts of erosion. The second part of this study covers the time series analysis of precipitation, rainfall erosivity and wind erosion at the Marmara Region. Rainfall and runoff erosivity factors are defined by considering the results of field measurements at 10 stations. Climatological changing effects on rainfall erosion have been determined by monitoring meteorological variables. In the previous studies, Fournier Index is defined to estimate the rainfall erosivity for the study area. The Fournier Index or in other words a climatic index

  11. Separation of dry and wet periods from regular weather station data for the analysis of wind erosion risk

    DEFF Research Database (Denmark)

    Naeini, Mohammadali Saremi; Fister, Wolfgang; Heckrath, Goswin Johann

    ), climate (e.g. air temperature, solar radiation, evaporation) and soil (e.g. infiltration rate, adhesion). The purpose of this study is to overcome the lack of soil moisture data for wind erosion risk assessment by developing a method to estimate the soil wetness based on easy available weather data......Soil moisture is one of the most important dynamic factors determining soil erodibility, because it affects the stability of soil aggregates and threshold velocities for particle detachment by wind. Soil moisture should, therefore, be included in wind erosion risk assessments. However, despite its...... importance, soil moisture content is often ignored in the analysis of wind data for wind erosion studies. The main reason most probably being the lack of soil moisture sensors in conventional climate stations. Soil moisture at a given point in time is determined by rain (e.g. rainfall amount, duration...

  12. A Spatial Model of Erosion and Sedimentation on Continental Margins

    National Research Council Canada - National Science Library

    Pratson, Lincoln

    1999-01-01

    .... A computer model that simulates the evolution of continental slope morphology under the interaction of sedimentation, slope failure, and sediment flow erosion has been constructed and validated...

  13. Sonic anemometry and sediment traps to evaluate the effectiveness of windbreaks in preventing wind erosion

    Directory of Open Access Journals (Sweden)

    Alejandro López

    Full Text Available ABSTRACT The present work analyzes the effectiveness of windbreaks against wind erosion through the study of streamline patterns and turbulent flow by means of sonic anemometry and sediment traps. To this end, windbreaks composed of plastic meshes (7.5 m long and 0.7 m tall were used. Windbreaks are a good means to reduce wind erosion, as they produce a positive effect on the characteristics of air currents that are related to wind erosion processes. Due to their ease of installation and dismantling, plastic meshes are widely used in areas where they are not required permanently. In our study, the use of a mesh of 13 × 30 threads cm−2 and 39 % porosity resulted in an average reduction of 85 % in face velocity at a height of 0.4 m and a distance of 1 m from the windbreak. The turbulence intensity i increased behind the windbreak because the reduction of mean of air speed on the leeside caused by the flow of air through the windbreak. Fluctuation levels, however, remained stable. The mean values of turbulence kinetic energy k decreased by 65 % to 86 % at a distance of 1 m from the windbreak and at a height of 0.4 m. The windbreak reduces erosion and sediment transportation 2 m downwind (2.9 times the windbreak height. Nevertheless, sediment transportation was not reduced at a height of 1.0 m and the effect of the windbreak was not observed at a distance of 6 m downwind (8.6 m times the windbreak height.

  14. Modelling Wind for Wind Farm Layout Optimization Using Joint Distribution of Wind Speed and Wind Direction

    DEFF Research Database (Denmark)

    Feng, Ju; Shen, Wen Zhong

    2015-01-01

    Reliable wind modelling is of crucial importance for wind farm development. The common practice of using sector-wise Weibull distributions has been found inappropriate for wind farm layout optimization. In this study, we propose a simple and easily implementable method to construct joint distribu......Reliable wind modelling is of crucial importance for wind farm development. The common practice of using sector-wise Weibull distributions has been found inappropriate for wind farm layout optimization. In this study, we propose a simple and easily implementable method to construct joint...... quite well in terms of the coefficient of determination R-2. Then, the best of these joint distributions is used in the layout optimization of the Horns Rev 1 wind farm and the choice of bin sizes for wind speed and wind direction is also investigated. It is found that the choice of bin size for wind...... direction is especially critical for layout optimization and the recommended choice of bin sizes for wind speed and wind direction is finally presented....

  15. A Maine romance. [Solar heating, wind power and cliff erosion control at a Maine site

    Energy Technology Data Exchange (ETDEWEB)

    Adams, J.A.

    1979-09-01

    The construction of a house on the coast of Maine included terracing of the bluff for erosion control, installation of water solar collectors for space and water heating, and construction of a wind turbine for electric power generation. A total of 4,027 ft/sup 2/ of house area is heated by a system of 10 collectors and 4,000 gal water storage. Insulation values are R-19 in the walls, R-40 in the ceiling, R-26 in the floors, and R-14 in the basement. South-facing windows provide additional heat gain. The wind turbine and generator system supplies alternating current to the house and also heats auxiliary water storage when necessary. The house, collectors, and wind turbine are designed to supply 85% of the heating load.

  16. Reliability Modeling of Wind Turbines

    DEFF Research Database (Denmark)

    Kostandyan, Erik

    Cost reductions for offshore wind turbines are a substantial requirement in order to make offshore wind energy more competitive compared to other energy supply methods. During the 20 – 25 years of wind turbines useful life, Operation & Maintenance costs are typically estimated to be a quarter...... the actions should be made and the type of actions requires knowledge on the accumulated damage or degradation state of the wind turbine components. For offshore wind turbines, the action times could be extended due to weather restrictions and result in damage or degradation increase of the remaining...... for Operation & Maintenance planning. Concentrating efforts on development of such models, this research is focused on reliability modeling of Wind Turbine critical subsystems (especially the power converter system). For reliability assessment of these components, structural reliability methods are applied...

  17. Active control: Wind turbine model

    DEFF Research Database (Denmark)

    Bindner, H.

    1999-01-01

    This report is a part of the reporting of the work done in the project 'Active Control of Wind Turbines'. This project aim is to develop a simulation model for design of control systems for turbines with pitch control and to use that model to designcontrollers. This report describes the model...... developed for controller design and analysis. Emphasis has been put on establishment of simple models describing the dynamic behavior of the wind turbine in adequate details for controller design. This hasbeen done with extensive use of measurements as the basis for selection of model complexity and model....... The models are all formulated as linear differential equations. The models are validated throughcomparisons with measurements performed on a Vestas WD 34 400 kW wind turbine. It is shown from a control point of view simple linear models can be used to describe the dynamic behavior of a pitch controlled wind...

  18. Modelling topographic potential for erosion and deposition using GIS

    Science.gov (United States)

    Helena Mitasova; Louis R. Iverson

    1996-01-01

    Modelling of erosion and deposition in complex terrain within a geographical information system (GIS) requires a high resolution digital elevation model (DEM), reliable estimation of topographic parameters, and formulation of erosion models adequate for digital representation of spatially distributed parameters. Regularized spline with tension was integrated within a...

  19. Shelter effect on a row of coal piles to prevent wind erosion

    Energy Technology Data Exchange (ETDEWEB)

    Borges, A.R.; Viergas, D.X.

    1988-08-01

    The shelter effect of porous wind breakers over a row of coal piles was studied in a wind tunnel. Two sets of tests are described, one performed in two dimensional configuration in which the shelter effect of several barriers with different heights and porosities is evaluated. The effect of wind direction is considered using a tridimensional model. Wall shear stress measurements performed with a hot film sensor allowed the characterization of the transport properties of fine particles of coal. By integration of the local wind properties the rates of pollutant emission were determined leading to the conclusion of an effective shelter action of the porous wind breakers.

  20. Multifractal Model of Soil Water Erosion

    Science.gov (United States)

    Oleshko, Klaudia

    2017-04-01

    Breaking of solid surface symmetry during the interaction between the rainfall of high erosivity index and internally unstable volcanic soil/vegetation systems, results in roughness increasing as well as fertile horizon loosing. In these areas, the sustainability of management practices depends on the ability to select and implement the precise indicators of soil erodibility and vegetation capacity to protect the system against the extreme damaging precipitation events. Notwithstanding, the complex, non-linear and scaling nature of the phenomena involved in the interaction among the soil, vegetation and precipitation is still not taken into account by the numerous commonly used empirical, mathematical and computer simulation models: for instance, by the universal soil loss equation (USLE). The soil erodibility factor (K-factor) is still measuring by a set of empirical, dimensionless parameters and indexes, without taking into account the scaling (frequently multifractal) origin of a broad range of heterogeneous, anisotropic and dynamical phenomena involved in hydric erosion. Their mapping is not representative of this complex system spatial variability. In our research, we propose to use the toolbox of fractals and multifractals techniques in vista of its ability to measure the scale invariance and type/degree of soil, vegetation and precipitation symmetry breaking. The hydraulic units are chosen as the precise measure of soil/vegetation stability. These units are measured and modeled for soils with contrasting architecture, based on their porosity/permeability (Poroperm) as well as retention capacity relations. The simple Catalog of the most common Poroperm relations is proposed and the main power law relations among the elements of studied system are established and compared for some representative agricultural and natural Biogeosystems of Mexico. All resulted are related with the Mandelbrot' Baby Theorem in order to construct the universal Phase Diagram which

  1. First quantification of severe wind erosion in yardang fields using cosmogenic 10Be within the western Qaidam Basin, China

    Science.gov (United States)

    Rohrmann, A.; Heermance, R.; Kapp, P. A.; Mc-Callister, A.

    2010-12-01

    Desert environments are a major source of global loess and may undergo substantial wind-erosion as evidenced by yardangs, which are streamlined bedrock ridges sculpted from uni-directional winds. However, there are few quantitative estimates of wind erosion rates in deflationary deserts, globally. Here, we report the first quantitative rates of bedrock wind erosion determined using cosmogenic 10Be in the western Qaidam basin, China, where roughly one-third of the modern basin floor (~3.88 × 104 km2) exposes yardangs. Eleven Neogene bedrock sandstone samples and one pre-Cenozoic granite sample were analyzed for 10Be concentrations. The Neogene samples were collected from crests and limbs of broad and actively growing anticlines, where in most places strata have been wind-sculpted into yardangs. Sedimentary bedrock erosion rates vary from 0.04-0.34 mm/yr, although 60 percent (n=7) of all samples cluster tightly at 0.1 ± 0.03 mm/yr. Erosion rates assume steady-state erosion over ~10,000 years. The lowest rate of 0.0025 mm/yr was obtained from a granite bedrock sample along the Altyn-Tagh range bounding the northwestern margin of the Qaidam basin and is consistent with other 10Be bedrock erosion rates collected from granitic bedrock elsewhere on the Tibetan Plateau. These results demonstrate the importance of lithology in controlling bedrock erodibility by wind. The highest erosion rates of 0.17, 0.25, and 0.34 mm/yr were determined along a transect across an active anticline. The lowest of the three rates was obtained from the top of the structure, suggesting that wind erosion and thus wind speeds are highest on the limbs of an anticline as wind is forced around the obstacle (Bernoulli-effect), rather than flowing over it. The determined sedimentary bedrock erosion rates of 0.04-0.34 mm/yr are in good agreement with previous analysis of basin wide-average erosion rates from geological cross-sections (0.29 mm/yr) and simple erosion calculations using previous lake

  2. A simple method to downscale daily wind statistics to hourly wind data

    OpenAIRE

    Guo, Zhongling

    2013-01-01

    Wind is the principal driver in the wind erosion models. The hourly wind speed data were generally required for precisely wind erosion modeling. In this study, a simple method to generate hourly wind speed data from daily wind statistics (daily average and maximum wind speeds together or daily average wind speed only) was established. A typical windy location with 3285 days (9 years) measured hourly wind speed data were used to validate the downscaling method. The results showed that the over...

  3. Wind Erosion Caused by Land Use Changes Significantly Reduces Ecosystem Carbon Storage and Carbon Sequestration Potentials in Grassland

    Science.gov (United States)

    Li, P.; Chi, Y. G.; Wang, J.; Liu, L.

    2017-12-01

    Wind erosion exerts a fundamental influence on the biotic and abiotic processes associated with ecosystem carbon (C) cycle. However, how wind erosion under different land use scenarios will affect ecosystem C balance and its capacity for future C sequestration are poorly quantified. Here, we established an experiment in a temperate steppe in Inner Mongolia, and simulated different intensity of land uses: control, 50% of aboveground vegetation removal (50R), 100% vegetation removal (100R) and tillage (TI). We monitored lateral and vertical carbon flux components and soil characteristics from 2013 to 2016. Our study reveals three key findings relating to the driving factors, the magnitude and consequence of wind erosion on ecosystem C balance: (1) Frequency of heavy wind exerts a fundamental control over the severity of soil erosion, and its interaction with precipitation and vegetation characteristics explained 69% variation in erosion intensity. (2) With increases in land use intensity, the lateral C flux induced by wind erosion increased rapidly, equivalent to 33%, 86%, 111% and 183% of the net ecosystem exchange of the control site under control, 50R, 100R and TI sites, respectively. (3) After three years' treatment, erosion induced decrease in fine fractions led to 31%, 43%, 85% of permanent loss of C sequestration potential in the surface 5cm soil for 50R, 100R and TI sites. Overall, our study demonstrates that lateral C flux associated with wind erosion is too large to be ignored. The loss of C-enriched fine particles not only reduces current ecosystem C content, but also results in irreversible loss of future soil C sequestration potential. The dynamic soil characteristics need be considered when projecting future ecosystem C balance in aeolian landscape. We also propose that to maintain the sustainability of grassland ecosystems, land managers should focus on implementing appropriate land use rather than rely on subsequent managements on degraded soils.

  4. Soil drying and wind erosion as affected by different types of shelterbelts planted in the desert region of western Rajasthan, India

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, J.P.; Rao, G.G.S.N.; Gupta, G.N.; Rao, B.V.R.

    1983-03-01

    Studies on the effects of 8-year-old shelterbelt plantations indicate a general reduction in wind velocity, wind erosion and evaporative loss of moisture from fields protected with Prosopis juliflora, Cassia siamea and Acacia tortilis. Cassia siamea shelterbelts are the most effective in checking wind erosion and delaying drying of the soil. (Refs. 13).

  5. Advances in modeling soil erosion after disturbance on rangelands

    Science.gov (United States)

    Research has been undertaken to develop process based models that predict soil erosion rate after disturbance on rangelands. In these models soil detachment is predicted as a combination of multiple erosion processes, rain splash and thin sheet flow (splash and sheet) detachment and concentrated flo...

  6. A combinatorial wind field model

    DEFF Research Database (Denmark)

    Soleimanzadeh, Maryam; Wisniewski, Rafal; Sloth, Christoffer

    2010-01-01

    of ordinary dierential equations (ODE). Considering some assumptions on the ow model (e.g. steadiness), the sys- tem can be approximated by a linear n dimensional system. Partitioning the state space into cells is performed by dening Lyapunov function sets, such that each cell is the region between two......This report is the deliverable 2.4 in the project Distributed Control of Large-Scale Oshore Wind Farms with the acronym Aeolus. The objective of this deliverable is to provide an understanding of the wind eld model and dynamic variations superimposed on the mean eld. In this report a dynamical...... model is developed for the wind ow in a wind farm based on nite volume method. Afterwards the model is transferred into a discrete framework called combinatorial, which determines the future behavior of the discrete system. In this regard, the dynamical model is de- rived and it is explained in terms...

  7. A Terrestrial Wind Erosion Analog for Mound and Moat Morphology of Gale Crater, Mars

    Science.gov (United States)

    Chan, M. A.; Netoff, D. I.

    2016-12-01

    A striking feature of Gale crater is the 5.5 km high, layered mound called Mount Sharp- the major exploration target for the Mars Science Laboratory rover, Curiosity. Within the 154 km diameter crater, low plains (e.g. Aeolis Palus) resemble a moat surrounding Mount Sharp. Current studies debate whether sedimentary layers completely filled the crater, as well as how the units were sculpted to their current morphology. Areas of southern Utah are favorable for terrestrial comparisons to Mars due to the exceptional exposure and lack of vegetation in the desert climate. Here, water is key in shaping large geomorphic features, but wind is also an effective sculptor of the landscape. In Grand Staircase Escalante National Monument, a distinctive weathering pit with a central mound and moat occurs in bleached eolian facies of the Jurassic Navajo Sandstone. This pit is 60 m wide by 20 m deep and was informally dubbed "inselberg pit", although it has recently gained notoriety under the name of "cosmic navel" or "cosmic ashtray". Inside the pit, loose dune sand shifts periodically and seasonally across the pit floor and up against the walls. Eolian abrasion features of cm to m scales include: grooves, flutes, and erosional-shaped fingers or stalks topped with concretions. Strong regional and local winds are funneled to amplify their velocity and produce a venturi effect that sculpts the pit via wind abrasion, creating an internal mound and moat morphology. Although the Navajo pit is significantly smaller than Gale crater on Mars by several orders of magnitude, both show comparable mound and moat morphologies accompanied by erosional wind features. In Gale crater, evidence for wind erosion includes yardangs, dunes, and wind streaks. The natural Navajo analogy suggests that strong, dynamic, focused winds on Mars could be capable of carving deeply into sedimentary layers over long periods of time to generate Mount Sharp, surrounded by low, eroded plains within Gale crater.

  8. Model and mechanism of erosion fracture of refractories at high temperatures

    International Nuclear Information System (INIS)

    Abrajtis, R.J.

    1988-01-01

    A calculational technique to evaluate the refractory erosion resistance is proposed. It is shown that under erosion fracture due to breaking off flow erosion plasters are formed which cover all the fractured surface. The proposed model and mechanism of erosion fracture and erosion plaster stability allow one to perform evaluation calculations of erosion characteristics of refractiories based on zirconium dioxide

  9. Ion sputtering of minerals and glasses: a first step to the simulation of solar wind erosion

    Energy Technology Data Exchange (ETDEWEB)

    Thiel, K.; Sassmannshausen, U.; Kuelzer, H.; Herr, W. (Koeln Univ. (Germany, F.R.). Inst. fuer Kernchemie)

    1982-09-01

    Selected rockforming minerals (plagioclase, augite, olivine, ilmenite, silicate and metal phases of the meteorite 'Brenham') as well as silicate and phosphate glasses were irradiated with heavy ions (/sup 4/He/sup +/, /sup 14/N/sup +/, /sup 20/Ne/sup +/, /sup 40/Ar/sup +/, /sup 56/Fe/sup +/, Xe/sup +/sub(nat)) in the energy range of 50 to 130 keV in order to study ion-induced sputtering. Sputtering yields were measured independently by means of multiple beam interferometry and particle track autoradiography. The theory of sputtering by Sigmund, modified by Smith, was used to convert experimental heavy ion sputtering yields to H/sup +/- and He/sup +/-sputtering yields of the same target. Taking into account solar wind irradiation conditions at the lunar surface, an estimate of lunar erosion rates due to solar wind sputtering is given for the targets studied.

  10. Active control: Wind turbine model

    Energy Technology Data Exchange (ETDEWEB)

    Bindner, Henrik

    1999-07-01

    This report is a part of the reporting of the work done in the project `Active Control of Wind Turbines`. This project aim is to develop a simulation model for design of control systems for turbines with pitch control and to use that model to design controllers. This report describes the model developed for controller design and analysis. Emphasis has been put on establishment of simple models describing the dynamic behavior of the wind turbine in adequate details for controller design. This has been done with extensive use of measurements as the basis for selection of model complexity and model validation as well as parameter estimation. The model includes a simple model of the structure of the turbine including tower and flapwise blade bending, a detailed model of the gear box and induction generator, a linearized aerodynamic model including modelling of induction lag and actuator and sensor models. The models are all formulated as linear differential equations. The models are validated through comparisons with measurements performed on a Vestas WD 34 400 kW wind turbine. It is shown from a control point of view simple linear models can be used to describe the dynamic behavior of a pitch controlled wind turbine. The model and the measurements corresponds well in the relevant frequency range. The developed model is therefore applicable for controller design. (au) EFP-91. 18 ills., 22 refs.

  11. Equivalent models of wind farms by using aggregated wind turbines and equivalent winds

    International Nuclear Information System (INIS)

    Fernandez, L.M.; Garcia, C.A.; Saenz, J.R.; Jurado, F.

    2009-01-01

    As a result of the increasing wind farms penetration on power systems, the wind farms begin to influence power system, and therefore the modeling of wind farms has become an interesting research topic. In this paper, new equivalent models of wind farms equipped with wind turbines based on squirrel-cage induction generators and doubly-fed induction generators are proposed to represent the collective behavior on large power systems simulations, instead of using a complete model of wind farms where all the wind turbines are modeled. The models proposed here are based on aggregating wind turbines into an equivalent wind turbine which receives an equivalent wind of the ones incident on the aggregated wind turbines. The equivalent wind turbine presents re-scaled power capacity and the same complete model as the individual wind turbines, which supposes the main feature of the present equivalent models. Two equivalent winds are evaluated in this work: (1) the average wind from the ones incident on the aggregated wind turbines with similar winds, and (2) an equivalent incoming wind derived from the power curve and the wind incident on each wind turbine. The effectiveness of the equivalent models to represent the collective response of the wind farm at the point of common coupling to grid is demonstrated by comparison with the wind farm response obtained from the detailed model during power system dynamic simulations, such as wind fluctuations and a grid disturbance. The present models can be used for grid integration studies of large power system with an important reduction of the model order and the computation time

  12. Challenges in soil erosion research and prediction model development

    Science.gov (United States)

    Quantification of soil erosion has been traditionally considered as a surface hydrologic process with equations for soil detachment and sediment transport derived from the mechanics and hydraulics of the rainfall and surface flow. Under the current erosion modeling framework, the soil has a constant...

  13. Geospatial application of the Water Erosion Prediction Project (WEPP) Model

    Science.gov (United States)

    D. C. Flanagan; J. R. Frankenberger; T. A. Cochrane; C. S. Renschler; W. J. Elliot

    2011-01-01

    The Water Erosion Prediction Project (WEPP) model is a process-based technology for prediction of soil erosion by water at hillslope profile, field, and small watershed scales. In particular, WEPP utilizes observed or generated daily climate inputs to drive the surface hydrology processes (infiltration, runoff, ET) component, which subsequently impacts the rest of the...

  14. Modeling soil erosion and transport on forest landscape

    Science.gov (United States)

    Ge Sun; Steven G McNulty

    1998-01-01

    Century-long studies on the impacts of forest management in North America suggest sediment can cause major reduction on stream water quality. Soil erosion patterns in forest watersheds are patchy and heterogeneous. Therefore, patterns of soil erosion are difficult to model and predict. The objective of this study is to develop a user friendly management tool for land...

  15. Modelling dune erosion, overwash and inundation of barrier islands

    NARCIS (Netherlands)

    Hoonhout, B.; Thiel de Vries, J.S.M.

    2012-01-01

    Physical model experiments are performed at Deltares to investigate the morphological response of barrier islands on extreme storm events. The experiments included dune erosion, overwash and inundation regimes. Extensive measurement techniques made detailed comparison with numerical models possible.

  16. Variability of Some soil physical and chemical properties along a transect under wind erosion processes in Segzi district, Isfahan

    Directory of Open Access Journals (Sweden)

    F. Ghiesari

    2016-10-01

    Full Text Available Introduction: Arid and semiarid environment is the main climatic condition in central Iran, as well as 80 million km 2 of Iran (> 50% is affected by wind erosion. During the last decades, the area affected by wind erosion and desertification processes has increased as a result of human activity, climate change and recent drought (Karimzadeh, 2001. Thus, it is crucial to control wind erosion in the arid regions of Iran as the most serious environmental problem. In this regard, the information on the rate of soil erosion is needed for developing management practices and making strategic decisions.. Soil erosion rate has increased as a result of improper gypsum and clay mining operations In the Segzi region of Isfahan,. coarsening of the soil texture (as a result of the loss of fine textured materials, depletion of soil organic matter and degeneration of vegetation are wind erosion damages occurred widely. The objective of this study was to estimate wind erosion rates with 137Cs technique, and also to determine changes in soil physical and chemical properties by wind erosion process, along the wind erosion transect across the Segzi district, east of Isfahan. Materials and Methods: This study was conducted in arid region of east of Isfahan Province. sixteen sites were selected along a northeast- southwest transect with 42 km length. Eighty soil samples were taken from 0-30 cm in 5 cm layer depth sections. Some physical and chemical properties were measured and a reference site with lowest rate of soil erosion and sedimentation was also studied. 137-Cs technique was used for determination of erosional and depositional sites. Analysis of variance was used to compare physical and chemical properties sites to reference site. Results and Discussion: The results showed that sites of 1 to 8, 10 and 12-16 were identified as erosional sites and two sites of 9 and 11 were recognized as depositional sites. Soil organic matter and total nitrogen contents were

  17. Experimental study on influence of vegetation coverage on runoff in wind-water erosion crisscross region

    Science.gov (United States)

    Wang, Jinhua; Zhang, Ronggang; Sun, Juan

    2018-02-01

    Using artificial rainfall simulation method, 23 simulation experiments were carried out in water-wind erosion crisscross region in order to analyze the influence of vegetation coverage on runoff and sediment yield. The experimental plots are standard plots with a length of 20m, width of 5m and slope of 15 degrees. The simulation experiments were conducted in different vegetation coverage experimental plots based on three different rainfall intensities. According to the experimental observation data, the influence of vegetation coverage on runoff and infiltration was analyzed. Vegetation coverage has a significant impact on runoff, and the higher the vegetation coverage is, the smaller the runoff is. Under the condition of 0.6mm/min rainfall intensity, the runoff volume from the experimental plot with 18% vegetation coverage was 1.2 times of the runoff from the experimental with 30% vegetation coverage. What’s more, the difference of runoff is more obvious in higher rainfall intensity. If the rainfall intensity reaches 1.32mm/min, the runoff from the experimental plot with 11% vegetation coverage is about 2 times as large as the runoff from the experimental plot with 53%vegetation coverage. Under the condition of small rainfall intensity, the starting time of runoff in the experimental plot with higher vegetation coverage is later than that in the experimental plot with low vegetation coverage. However, under the condition of heavy rainfall intensity, there is no obvious difference in the beginning time of runoff. In addition, the higher the vegetation coverage is, the deeper the rainfall infiltration depth is.The results can provide reference for ecological construction carried out in wind erosion crisscross region with serious soil erosion.

  18. Wind erosion as an environmental transport pathway of glyphosate and AMPA

    Science.gov (United States)

    Bento, Célia P. M.; Goossens, Dirk; Rezaei, Mahrooz; Riksen, Michel; Mol, Hans G. J.; Ritsema, Coen J.; Geissen, Violette

    2017-04-01

    health risk assessment studies. Moreover, glyphosate applications during dry periods in regions susceptible to wind erosion should be avoided.

  19. The development of U. S. soil erosion prediction and modeling

    Directory of Open Access Journals (Sweden)

    John M. Laflen

    2013-09-01

    Full Text Available Soil erosion prediction technology began over 70 years ago when Austin Zingg published a relationship between soil erosion (by water and land slope and length, followed shortly by a relationship by Dwight Smith that expanded this equation to include conservation practices. But, it was nearly 20 years before this work's expansion resulted in the Universal Soil Loss Equation (USLE, perhaps the foremost achievement in soil erosion prediction in the last century. The USLE has increased in application and complexity, and its usefulness and limitations have led to the development of additional technologies and new science in soil erosion research and prediction. Main among these new technologies is the Water Erosion Prediction Project (WEPP model, which has helped to overcome many of the shortcomings of the USLE, and increased the scale over which erosion by water can be predicted. Areas of application of erosion prediction include almost all land types: urban, rural, cropland, forests, rangeland, and construction sites. Specialty applications of WEPP include prediction of radioactive material movement with soils at a superfund cleanup site, and near real-time daily estimation of soil erosion for the entire state of Iowa.

  20. Modeling Edge Effects of Tillage Erosion

    Science.gov (United States)

    Tillage erosion has been recognized as an important factor in redistribution of soil over time and in the development of morphological changes within agricultural fields. Field borders, fences, and vegetated strips that interrupt soil fluxes lead to the creation topographic discontinuities or lynche...

  1. Evaluation of the RWEQ and SWEEP in simulating soil and PM10 loss from a portable wind tunnel

    Science.gov (United States)

    Wind erosion threatens sustainable agriculture and environmental quality in the Columbia Plateau region of the US Pacific Northwest. Wind erosion models such as Wind Erosion Prediction System (WEPS) and the Revised Wind Erosion Equation (RWEQ) have been developed as tools for identifying practices t...

  2. Modeling of Hall Thruster Lifetime and Erosion Mechanisms (Preprint)

    National Research Council Canada - National Science Library

    Cheng, Shannon Y; Martinez-Sanchez, Manuel

    2007-01-01

    ...-limiting factor of the propulsion system. Evolution of the thruster geometry as a result of material removal due to sputtering is modeled by calculating wall erosion rates, stepping the grid boundary by a chosen time step and altering...

  3. Modelling erosion and its interaction with soil organic carbon.

    Science.gov (United States)

    Oyesiku-Blakemore, Joseph; Verrot, Lucile; Geris, Josie; Zhang, Ganlin; Peng, Xinhua; Hallett, Paul; Smith, Jo

    2017-04-01

    Water driven soil erosion removes and relocates a significant quantity of soil organic carbon. In China the quantity of carbon removed from the soil through water erosion has been reported to be 180+/-80 Mt y-1 (Yue et al., 2011). Being able to effectively model the movement of such a large quantity of carbon is important for the assessment of soil quality and carbon storage in the region and further afield. A large selection of erosion models are available and much work has been done on evaluating the performance of these in developed countries (Merritt et al., 2006). Fewer studies have evaluated the application of these models on soils in developing countries. Here we evaluate and compare the performance of two of these models, WEPP (Laflen et al., 1997) and RUSLE (Renard et al., 1991), for simulations of soil erosion and deposition at the slope scale on a Chinese Red Soil under cultivation using measurements taken at the site. We also describe work to dynamically couple the movement of carbon presented in WEPP to a model of soil organic matter and nutrient turnover, ECOSSE (Smith et al., 2010). This aims to improve simulations of both erosion and carbon cycling by using the simulated rates of erosion to alter the distribution of soil carbon, the depth of soil and the clay content across the slopes, changing the simulated rate of carbon turnover. This, in turn, affects the soil carbon available to be eroded in the next timestep, so improving estimates of carbon erosion. We compare the simulations of this coupled modelling approach with those of the unaltered ECOSSE and WEPP models to determine the importance of coupling erosion and turnover models on the simulation of carbon losses at catchment scale.

  4. Modeling wind adjustment factor and midflame wind speed for Rothermel's surface fire spread model

    Science.gov (United States)

    Patricia L. Andrews

    2012-01-01

    Rothermel's surface fire spread model was developed to use a value for the wind speed that affects surface fire, called midflame wind speed. Models have been developed to adjust 20-ft wind speed to midflame wind speed for sheltered and unsheltered surface fuel. In this report, Wind Adjustment Factor (WAF) model equations are given, and the BehavePlus fire modeling...

  5. Impact erosion model for gravity-dominated planetesimals

    Science.gov (United States)

    Genda, Hidenori; Fujita, Tomoaki; Kobayashi, Hiroshi; Tanaka, Hidekazu; Suetsugu, Ryo; Abe, Yutaka

    2017-09-01

    Disruptive collisions have been regarded as an important process for planet formation, while non-disruptive, small-scale collisions (hereafter called erosive collisions) have been underestimated or neglected by many studies. However, recent studies have suggested that erosive collisions are also important to the growth of planets, because they are much more frequent than disruptive collisions. Although the thresholds of the specific impact energy for disruptive collisions (QRD*) have been investigated well, there is no reliable model for erosive collisions. In this study, we systematically carried out impact simulations of gravity-dominated planetesimals for a wide range of specific impact energy (QR) from disruptive collisions (QR ∼ QRD*) to erosive ones (QR QR, but that it can be nicely scaled by QRD* for the parameter ranges investigated (Rtar = 30-300 km, vimp = 2-5 km/s). This means that Mej/Mtot depends only on QR/QRD* in these parameter ranges. We confirmed that the collision outcomes for much less erosive collisions (QR QR/QRD* holds. For disruptive collisions (QR ∼ QRD*), the curvature of the target has a significant effect on Mej/Mtot. We also examined the angle-averaged value of Mej/Mtot and found that the numerically obtained relation between angle-averaged Mej/Mtot and QR/QRD* is very similar to the cases for θ = 45° impacts. We proposed a new erosion model based on our numerical simulations for future research on planet formation with collisional erosion.

  6. Dust records in the Pleistocene sediments of Fraser Island: palaeoclimatic reconstruction of wind erosion over the last 600 ka

    Energy Technology Data Exchange (ETDEWEB)

    Longmore, M.E. [Adelaide Univ., SA (Australia). Dept of Geography; McTainsh, G.H. [Griffith Univ., Nathan, QLD (Australia). Fac of Environmental Sciences

    1997-12-31

    Full text: Pleistocene lake sediments from a relic perched freshwater lake on Fraser Island have been found to date back to ca.600 ka using U/Th analysis of the organics. This sequence is one of the three longest terrestrial records of environmental change in Australia and the contained evidence of vegetation, fire and lake level changes (Longmore and Heijnis, 1996) and is an invaluable contribution to palaeoclimatic reconstruction. A younger sequence, dated by conventional radiocarbon analysis, has 6.5 m of continuous organic sedimentation from ca. 30 ka to the present. The last 8.5 ka has been analysed in detail, showing a mid-Holocene `dry` period (Longmore, 1996). Continental aeolian dust from extreme wind erosional events has been measured in modern atmospheres (McTainsh, 1989; Knight et al., 1995) and deep sea cores (Hesse, 1994), but the terrestrial record of wind erosion during the Pleistocene is sparse. We will report on a pilot project to determine the presence of aeolian dust from extreme wind erosional events in the past in the sediments of Fraser Island lakes. Due to the highly weathered, well-sorted, siliceous nature of the dune sands forming the Island and the highly organic nature of the lake sediments (80-95% LOI), these are some of the few terrestrial sequences that permit separation of aeolian dust from local catchment materials. In the future, oxygen isotope and XRD analysis of the extracted dust will allow the most likely source of the entrained material to be determined and thus provide further evidence as to the wind regime during the last 600ka and 30ka respectively. The separation of dust from these terrestrial sequences is a major achievement and potentially may make a significant contribution to global palaeoclimatic models. Paper no. 78. 5 refs.

  7. I Got Them Dust Bowl Blues: Wind Erosion in the Music of the Southern Great Plains

    Science.gov (United States)

    Lee, J. A.

    2017-12-01

    This paper deals with the role of wind erosion and blowing dust on the music of the Dust Bowl region, a portion of the southern Great Plains of the United States. A defining characteristic of the region is dust storms, and in the 1930s, severe dust storms created dramatic images that came to symbolize all of the economic, social and environmental hardships suffered by the people during the 1930s. The music of the time, by Woody Guthrie and others, suggested that the region was being destroyed, never to recover. The region was resilient, however, and in recent decades, dust has been depicted in songs either as an adversity to be endured or simply as a normal part of life in the area. It may be that blowing dust has become a defining characteristic of the region because of a somewhat warped sense of pride in living in an often-difficult environment.

  8. A large source of dust missing in particulate matter emission inventories? Wind erosion of post-fire landscapes

    Science.gov (United States)

    N. S. Wagenbrenner; S. H. Chung; B. K. Lamb

    2017-01-01

    Wind erosion of soils burned by wildfire contributes substantial particulate matter (PM) in the form of dust to the atmosphere, but the magnitude of this dust source is largely unknown. It is important to accurately quantify dust emissions because they can impact human health, degrade visibility, exacerbate dust-on-snow issues (including snowmelt timing, snow chemistry...

  9. Shot-By-Shot Erosion Modeling of Retired 120mm M256 Gun Tube #1988

    National Research Council Canada - National Science Library

    Sopok, S

    1998-01-01

    .... Our Materials Ablation Conduction Erosion (MACE) M256/M829A2 gun system erosion model, with its interior ballistics, thermochemistry, and boundary layer components, is constantly being refined by this erosion data...

  10. Mechanisms and models for bentonite erosion

    International Nuclear Information System (INIS)

    Neretnieks, Ivars; Longcheng Liu; Moreno, Luis

    2009-12-01

    from the compacted bentonite into and through the expanding gel towards the gel/ water interface and further out into the seeping water. Mass transfer resistance for ions as well as smectite particles in the seeping water is accounted for in the simulations. The sodium concentration profile in the gel influences the repulsive forces between the particles as well as the viscosity of the expanding gel. Under the most unfavourable circumstances, i.e. at high flowrates and large fracture apertures, considerable loss of smectite can be expected for a buffer that consists of only smectite. Other calculations have been done to assess under which conditions of flowrate, water compositions and initial bentonite chemical compositions the water composition at the gel/water interface could become larger than the CCC. At the same time the proportion of calcium and sodium as counter ions in the smectite at the gel/water interface was studied. This was done because should the calcium make up more than about 90% of the counterions, the smectite behaves very differently from than smectite with less calcium. In these calculations we have accounted for ion exchange in the expanding gel, for diffusion of ions in the gel, for transport to and from the seeping groundwater, and of the dissolution of soluble minerals that may supply the gel with ions. We conclude that with our present understanding of the processes it is not possible to affirmatively state that erosion of pure smectite gels cannot occur to a considerable extent. In experiments in downward facing slits it has been found that bentonite releases gel agglomerates much faster than our model predicts. These are released and sediment also under conditions where it is expected that the smectite particles should have separated into individual smectite sheets, which would not noticeably be influenced by gravity. The reasons for this behaviour are not understood. However, the commercial bentonites that have been extensively investigated

  11. Mechanisms and models for bentonite erosion

    Energy Technology Data Exchange (ETDEWEB)

    Neretnieks, Ivars; Longcheng Liu; Moreno, Luis (Dept. of Chemical Engineering and Technology, School of Chemical Science and Engineering, Royal Inst. of Technology, KTH, Stockholm (Sweden))

    2009-12-15

    from the compacted bentonite into and through the expanding gel towards the gel/ water interface and further out into the seeping water. Mass transfer resistance for ions as well as smectite particles in the seeping water is accounted for in the simulations. The sodium concentration profile in the gel influences the repulsive forces between the particles as well as the viscosity of the expanding gel. Under the most unfavourable circumstances, i.e. at high flowrates and large fracture apertures, considerable loss of smectite can be expected for a buffer that consists of only smectite. Other calculations have been done to assess under which conditions of flowrate, water compositions and initial bentonite chemical compositions the water composition at the gel/water interface could become larger than the CCC. At the same time the proportion of calcium and sodium as counter ions in the smectite at the gel/water interface was studied. This was done because should the calcium make up more than about 90% of the counterions, the smectite behaves very differently from than smectite with less calcium. In these calculations we have accounted for ion exchange in the expanding gel, for diffusion of ions in the gel, for transport to and from the seeping groundwater, and of the dissolution of soluble minerals that may supply the gel with ions. We conclude that with our present understanding of the processes it is not possible to affirmatively state that erosion of pure smectite gels cannot occur to a considerable extent. In experiments in downward facing slits it has been found that bentonite releases gel agglomerates much faster than our model predicts. These are released and sediment also under conditions where it is expected that the smectite particles should have separated into individual smectite sheets, which would not noticeably be influenced by gravity. The reasons for this behaviour are not understood. However, the commercial bentonites that have been extensively investigated

  12. Sand transport by wind, erosion and deposition and the origin of aeolian bedforms

    Science.gov (United States)

    Duran Vinent, Orencio

    2014-05-01

    Aeolian processes involve the wind action on a sedimentary substrate, namely erosion, sand transport and deposition. They are responsible for the emergence of aeolian dunes and ripples. Here, we discuss the physics of aeolian sediment transport from a physical point of view. Relevant time and length scales associated to turbulent wind fluctuations are summarized using aerodynamic theory. At the microscopic scale, the main forces acting on the grains are detailed. Sand transport is then studied using two phase numerical simulations based on a discrete element method for particles coupled to a continuum Reynolds averaged description of hydrodynamics. We then introduce the concepts - e.g. saturated flux, saturation length - and the relevant framework for the development of a continuum (macroscopic) quantitative description of transport at the core of our current understanding of aeolian dunes formation. At smaller scales, aeolian ripples arise from the interaction of sediment transport and topography. At larger scales, the nonlinear nature of the interaction between dunes leads to the formation of dune fields.

  13. An integrated modeling method for wind turbines

    Science.gov (United States)

    Fadaeinedjad, Roohollah

    To study the interaction of the electrical, mechanical, and aerodynamic aspects of a wind turbine, a detailed model that considers all these aspects must be used. A drawback of many studies in the area of wind turbine simulation is that either a very simple mechanical model is used with a detailed electrical model, or vice versa. Hence the interactions between electrical and mechanical aspects of wind turbine operation are not accurately taken into account. In this research, it will be shown that a combination of different simulation packages, namely TurbSim, FAST, and Simulink can be used to model the aerodynamic, mechanical, and electrical aspects of a wind turbine in detail. In this thesis, after a review of some wind turbine concepts and software tools, a simulation structure is proposed for studying wind turbines that integrates the mechanical and electrical components of a wind energy conversion device. Based on the simulation structure, a comprehensive model for a three-bladed variable speed wind turbine with doubly-fed induction generator is developed. Using the model, the impact of a voltage sag on the wind turbine tower vibration is investigated under various operating conditions such as power system short circuit level, mechanical parameters, and wind turbine operating conditions. It is shown how an electrical disturbance can cause more sustainable tower vibrations under high speed and turbulent wind conditions, which may disrupt the operation of pitch control system. A similar simulation structure is used to model a two-bladed fixed speed wind turbine with an induction generator. An extension of the concept is introduced by adding a diesel generator system. The model is utilized to study the impact of the aeroelastic aspects of wind turbine (i.e. tower shadow, wind shears, yaw error, turbulence, and mechanical vibrations) on the power quality of a stand-alone wind-diesel system. Furthermore, an IEEE standard flickermeter model is implemented in a

  14. A pragmatic approach to modelling soil and water conservation measures with a cathment scale erosion model.

    NARCIS (Netherlands)

    Hessel, R.; Tenge, A.J.M.

    2008-01-01

    To reduce soil erosion, soil and water conservation (SWC) methods are often used. However, no method exists to model beforehand how implementing such measures will affect erosion at catchment scale. A method was developed to simulate the effects of SWC measures with catchment scale erosion models.

  15. Riparian erosion vulnerability model based on environmental features.

    Science.gov (United States)

    Botero-Acosta, Alejandra; Chu, Maria L; Guzman, Jorge A; Starks, Patrick J; Moriasi, Daniel N

    2017-12-01

    Riparian erosion is one of the major causes of sediment and contaminant load to streams, degradation of riparian wildlife habitats, and land loss hazards. Land and soil management practices are implemented as conservation and restoration measures to mitigate the environmental problems brought about by riparian erosion. This, however, requires the identification of vulnerable areas to soil erosion. Because of the complex interactions between the different mechanisms that govern soil erosion and the inherent uncertainties involved in quantifying these processes, assessing erosion vulnerability at the watershed scale is challenging. The main objective of this study was to develop a methodology to identify areas along the riparian zone that are susceptible to erosion. The methodology was developed by integrating the physically-based watershed model MIKE-SHE, to simulate water movement, and a habitat suitability model, MaxEnt, to quantify the probability of presences of elevation changes (i.e., erosion) across the watershed. The presences of elevation changes were estimated based on two LiDAR-based elevation datasets taken in 2009 and 2012. The changes in elevation were grouped into four categories: low (0.5 - 0.7 m), medium (0.7 - 1.0 m), high (1.0 - 1.7 m) and very high (1.7 - 5.9 m), considering each category as a studied "species". The categories' locations were then used as "species location" map in MaxEnt. The environmental features used as constraints to the presence of erosion were land cover, soil, stream power index, overland flow, lateral inflow, and discharge. The modeling framework was evaluated in the Fort Cobb Reservoir Experimental watershed in southcentral Oklahoma. Results showed that the most vulnerable areas for erosion were located at the upper riparian zones of the Cobb and Lake sub-watersheds. The main waterways of these sub-watersheds were also found to be prone to streambank erosion. Approximatively 80% of the riparian zone (streambank

  16. A large source of dust missing in Particulate Matter emission inventories? Wind erosion of post-fire landscapes

    Directory of Open Access Journals (Sweden)

    N.S. Wagenbrenner

    2017-02-01

    Full Text Available Wind erosion of soils burned by wildfire contributes substantial particulate matter (PM in the form of dust to the atmosphere, but the magnitude of this dust source is largely unknown. It is important to accurately quantify dust emissions because they can impact human health, degrade visibility, exacerbate dust-on-snow issues (including snowmelt timing, snow chemistry, and avalanche danger, and affect ecological and biogeochemical cycles, precipitation regimes, and the Earth’s radiation budget. We used a novel modeling approach in which local-scale winds were used to drive a high-resolution dust emission model parameterized for burned soils to provide a first estimate of post-fire PM emissions. The dust emission model was parameterized with dust flux measurements from a 2010 fire scar. Here we present a case study to demonstrate the ability of the modeling framework to capture the onset and dynamics of a post-fire dust event and then use the modeling framework to estimate PM emissions from burn scars left by wildfires in U.S. western sagebrush landscapes during 2012. Modeled emissions from 1.2 million ha of burned soil totaled 32.1 Tg (11.7–352 Tg of dust as PM10 and 12.8 Tg (4.68–141 Tg as PM2.5. Despite the relatively large uncertainties in these estimates and a number of underlying assumptions, these first estimates of annual post-fire dust emissions suggest that post-fire PM emissions could substantially increase current annual PM estimates in the U.S. National Emissions Inventory during high fire activity years. Given the potential for post-fire scars to be a large source of PM, further on-site PM flux measurements are needed to improve emission parameterizations and constrain these first estimates.

  17. A model for hydrolytic degradation and erosion of biodegradable polymers.

    Science.gov (United States)

    Sevim, Kevser; Pan, Jingzhe

    2018-01-15

    For aliphatic polyesters such as PLAs and PGAs, there is a strong interplay between the hydrolytic degradation and erosion - degradation leads to a critically low molecular weight at which erosion starts. This paper considers the underlying physical and chemical processes of hydrolytic degradation and erosion. Several kinetic mechanisms are incorporated into a mathematical model in an attempt to explain different behaviours of mass loss observed in experiments. In the combined model, autocatalytic hydrolysis, oligomer production and their diffusion are considered together with surface and interior erosion using a set of differential equations and Monte Carlo technique. Oligomer and drug diffusion are modelled using Fick's law with the diffusion coefficients dependent on porosity. The porosity is due to the formation of cavities which are a result of polymer erosion. The model can follow mass loss and drug release up to 100%, which cannot be explained using a simple reaction-diffusion. The model is applied to two case studies from the literature to demonstrate its validity. The case studies show that a critical molecular weight for the onset of polymer erosion and an incubation period for the polymer dissolution are two critical factors that need to be considered when predicting mass loss and drug release. In order to design bioresorbable implants, it is important to have a mathematical model to predict polymer degradation and corresponding drug release. However, very different behaviours of polymer degradation have been observed and there is no single model that can capture all these behaviours. For the first time, the model presented in this paper is capable of capture all these observed behaviours by switching on and off different underlying mechanisms. Unlike the existing reaction-diffusion models, the model presented here can follow the degradation and drug release all the way to the full disappearance of an implant. Crown Copyright © 2017. Published by

  18. Modeling fluvial erosion on regional to continental scales

    Science.gov (United States)

    Howard, Alan D.; Dietrich, William E.; Seidl, Michele A.

    1994-01-01

    The fluvial system is a major concern in modeling landform evolution in response to tectonic deformation. Three stream bed types (bedrock, coarse-bed alluvial, and fine-bed alluvial) differ in factors controlling their occurrence and evolution and in appropriate modeling approaches. Spatial and temporal transitions among bed types occur in response to changes in sediment characteristics and tectonic deformation. Erosion in bedrock channels depends upon the ability to scour or pluck bed material; this detachment capacity is often a power function of drainage area and gradient. Exposure of bedrock in channel beds, due to rapid downcutting or resistant rock, slows the response of headwater catchments to downstream baselevel changes. Sediment routing through alluvial channels must account for supply from slope erosion, transport rates, abrasion, and sorting. In regional landform modeling, implicit rate laws must be developed for sediment production from erosion of sub-grid-scale slopes and small channels.

  19. Wind model for offshore power simulation

    OpenAIRE

    Hervada Sala, Carme; Jarauta Bragulat, Eusebio; Gibergans Baguena, José; Buenestado Caballero, Pablo

    2015-01-01

    Offshore wind energy is an alternative energy source of increased interest. A large offshore wind farms have been planned or under construction, mainly in northern Europe. One of the points needed to be able to implement offshore projects is to characterize and model the wind for marine generation. Models are needed for the design of the most appropriate control strategies. Some attempts have been done to do so; recently these models are implemented under a wind turbine block set in Matlab/Si...

  20. Advancements in Wind Integration Study Data Modeling: The Wind Integration National Dataset (WIND) Toolkit; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Draxl, C.; Hodge, B. M.; Orwig, K.; Jones, W.; Searight, K.; Getman, D.; Harrold, S.; McCaa, J.; Cline, J.; Clark, C.

    2013-10-01

    Regional wind integration studies in the United States require detailed wind power output data at many locations to perform simulations of how the power system will operate under high-penetration scenarios. The wind data sets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as be time synchronized with available load profiles. The Wind Integration National Dataset (WIND) Toolkit described in this paper fulfills these requirements. A wind resource dataset, wind power production time series, and simulated forecasts from a numerical weather prediction model run on a nationwide 2-km grid at 5-min resolution will be made publicly available for more than 110,000 onshore and offshore wind power production sites.

  1. Dynamic Models for Wind Turbines and Wind Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M.; Santoso, S.

    2011-10-01

    The primary objective of this report was to develop universal manufacturer-independent wind turbine and wind power plant models that can be shared, used, and improved without any restrictions by project developers, manufacturers, and engineers. Manufacturer-specific models of wind turbines are favored for use in wind power interconnection studies. While they are detailed and accurate, their usages are limited to the terms of the non-disclosure agreement, thus stifling model sharing. The primary objective of the work proposed is to develop universal manufacturer-independent wind power plant models that can be shared, used, and improved without any restrictions by project developers, manufacturers, and engineers. Each of these models includes representations of general turbine aerodynamics, the mechanical drive-train, and the electrical characteristics of the generator and converter, as well as the control systems typically used. To determine how realistic model performance is, the performance of one of the models (doubly-fed induction generator model) has been validated using real-world wind power plant data. This work also documents selected applications of these models.

  2. Reliability Modeling of Wind Turbines

    DEFF Research Database (Denmark)

    Kostandyan, Erik

    components. Thus, models of reliability should be developed and applied in order to quantify the residual life of the components. Damage models based on physics of failure combined with stochastic models describing the uncertain parameters are imperative for development of cost-optimal decision tools...... for Operation & Maintenance planning. Concentrating efforts on development of such models, this research is focused on reliability modeling of Wind Turbine critical subsystems (especially the power converter system). For reliability assessment of these components, structural reliability methods are applied....... Further, reliability modeling of load sharing systems is considered and a theoretical model is proposed based on sequential order statistics and structural systems reliability methods. Procedures for reliability estimation are detailed and presented in a collection of research papers....

  3. An Appropriate Wind Model for Wind Integrated Power Systems Reliability Evaluation Considering Wind Speed Correlations

    Directory of Open Access Journals (Sweden)

    Rajesh Karki

    2013-02-01

    Full Text Available Adverse environmental impacts of carbon emissions are causing increasing concerns to the general public throughout the world. Electric energy generation from conventional energy sources is considered to be a major contributor to these harmful emissions. High emphasis is therefore being given to green alternatives of energy, such as wind and solar. Wind energy is being perceived as a promising alternative. This source of energy technology and its applications have undergone significant research and development over the past decade. As a result, many modern power systems include a significant portion of power generation from wind energy sources. The impact of wind generation on the overall system performance increases substantially as wind penetration in power systems continues to increase to relatively high levels. It becomes increasingly important to accurately model the wind behavior, the interaction with other wind sources and conventional sources, and incorporate the characteristics of the energy demand in order to carry out a realistic evaluation of system reliability. Power systems with high wind penetrations are often connected to multiple wind farms at different geographic locations. Wind speed correlations between the different wind farms largely affect the total wind power generation characteristics of such systems, and therefore should be an important parameter in the wind modeling process. This paper evaluates the effect of the correlation between multiple wind farms on the adequacy indices of wind-integrated systems. The paper also proposes a simple and appropriate probabilistic analytical model that incorporates wind correlations, and can be used for adequacy evaluation of multiple wind-integrated systems.

  4. Uncertainty quantification in wind farm flow models

    DEFF Research Database (Denmark)

    Murcia Leon, Juan Pablo

    uncertainties through a model chain are presented and applied to several wind energy related problems such as: annual energy production estimation, wind turbine power curve estimation, wake model calibration and validation, and estimation of lifetime equivalent fatigue loads on a wind turbine. Statistical...

  5. A case for wind enhanced tectonics: Plio-Quaternary sedimentation, erosion, and structural evolution controlled by wind within the Qaidam Basin, China

    Science.gov (United States)

    Heermance, R. V.; Kapp, P. A.; Pullen, A.; Garzione, C. N.

    2012-12-01

    The interplay between tectonics and localized erosion through fluvial and/or glacial processes has been widely documented. Wind erosion, however, has gone largely un-recognized as a potentially important process in this concept. We document an acceleration in shortening in response to wind deflation above actively deforming fault propagation anticlines since ~3.0 Ma in the Qaidam Basin, China. Evidence for this comes from a 1750 m measured section along the southwestern flank of an intra-basin anticline (38.33°N, 93.46°E) and regional cross-sections. Magnetostratigraphy provides age control for prominent stratigraphic and isotopic changes within the section. A positive shift of ~6‰ in the δ18O values of lake carbonates occurs at 1090 m (3.1 Ma), interpreted to be the result of increased aridity at that time. An intraformational angular unconformity, associated with anticline growth, appears at 1172 m (3.0 Ma) and records the initiation of growth strata deposition. At 1235 m (2.6 Ma), a marked lithofacies change to sub-aerial, evaporitic conditions is observed, and is associated with a 3-fold reduction in sedimentation rate. Paleo-yardangs, which are wind-eroded landforms preserved in the stratigraphic record, appear at 1260 m (2.4 Ma). These observations indicate that regional aridification at 3.1 Ma was followed closely by or coincident with fold growth. Facies changes to more evaporitic strata and erosion of the basin floor (based on paleo-yardangs) trailed initial climate and tectonic changes by 500,000-700,000 years. Although the on-lap relationship of post-growth strata implies that syn-tectonic strata may have pinched-out along the flanks of the anticline, our new analysis indicates that at least 1172 m of pre-growth strata must have been eroded from the core of the anticline since 3.0 Ma at a time-averaged rate of ~0.4 mm/year, comparable to fluvial and glacial erosion rates within active tectonic settings. The lack of an integrated fluvial channel

  6. Bayesian Predictive Models for Rayleigh Wind Speed

    DEFF Research Database (Denmark)

    Shahirinia, Amir; Hajizadeh, Amin; Yu, David C

    2017-01-01

    predictive model of the wind speed aggregates the non-homogeneous distributions into a single continuous distribution. Therefore, the result is able to capture the variation among the probability distributions of the wind speeds at the turbines’ locations in a wind farm. More specifically, instead of using...... a wind speed distribution whose parameters are known or estimated, the parameters are considered as random whose variations are according to probability distributions. The Bayesian predictive model for a Rayleigh which only has a single model scale parameter has been proposed. Also closed-form posterior......One of the major challenges with the increase in wind power generation is the uncertain nature of wind speed. So far the uncertainty about wind speed has been presented through probability distributions. Also the existing models that consider the uncertainty of the wind speed primarily view...

  7. Stochastic modeling of the cover effect and bedrock erosion

    Science.gov (United States)

    Turowski, Jens M.

    2009-03-01

    Several important fluvial bedrock erosion processes are driven by the impact of bed load particles. Bed load transport rates fluctuate strongly in both nature and experiment, and stochastic models of the transport processes have been put forward to describe this behavior. In this paper I adapt a model based on a Markov chain formulation to derive probability distributions for bed load transport rate over a rock bed only partly covered by sediment. I propose a way to calculate the probability distribution of bed cover for given sediment supply using a combinatoric model and combine the two curves to calculate probability distributions for bed cover and erosion rate at constant hydraulics. In the proposed model, mean bed cover is an exponentially declining function of the number of particles in the control volume. The model describes recently published experimental data well, but at the moment it is not possible to finally discriminate between the exponential and the previously proposed linear model formulation. Distributions of erosion rate are fairly broad functions slightly skewed toward high erosion rates.

  8. Sensitivity Analysis of a process based erosion model using FAST

    Science.gov (United States)

    Gabelmann, Petra; Wienhöfer, Jan; Zehe, Erwin

    2015-04-01

    Erosion, sediment redistribution and related particulate transport are severe problems in agro-ecosystems with highly erodible loess soils. They are controlled by various factors, for example rainfall intensity, topography, initial wetness conditions, spatial patterns of soil hydraulic parameters, land use and tillage practice. The interplay between those factors is not well understood. A number of models were developed to indicate those complex interactions and to estimate the amount of sediment which will be removed, transported and accumulated. In order to make use of physical-based models to provide insight on the physical system under study it is necessary to understand the interactions of parameters and processes in the model domain. Sensitivity analyses give insight in the relative importance of model parameters, which in addition is useful for judging where the greatest efforts have to be spent in acquiring or calibrating input parameters. The objective of this study was to determine the sensitivity of the erosion-related parameters in the CATFLOW model. We analysed simulations from the Weiherbach catchment, where good matches of observed hydrological response and erosion dynamics had been obtained in earlier studies. The Weiherbach catchment is located in an intensively cultivated loess region in southwest Germany and due to the hilly landscape and the highly erodible loess soils, erosion is a severe environmental problem. CATFLOW is a process-based hydrology and erosion model that can operate on catchment and hillslope scales. Soil water dynamics are described by the Richards equation including effective approaches for preferential flow. Evapotranspiration is simulated using an approach based on the Penman-Monteith equation. The model simulates overland flow using the diffusion wave equation. Soil detachment is related to the attacking forces of rainfall and overland flow, and the erosion resistance of the soil. Sediment transport capacity and sediment

  9. Retrospection of recent 30-year changes in the process of soil wind erosion in the Luanhe River Source Area of North China using Cesium-137

    Energy Technology Data Exchange (ETDEWEB)

    Chen Zhifan [State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, 19 Xin Jie Kou Wai St., Beijing 100875 (China) and College of Environment and Planning, Henan University, Kaifeng 475001 (China)], E-mail: chenzhf0604@163.com; Zhao Ye [State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, 19 Xin Jie Kou Wai St., Beijing 100875 (China)], E-mail: zhaoye@bnu.edu.cn; Qiao Jiejuan [State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, 19 Xin Jie Kou Wai St., Beijing 100875 (China); Zhang Qing [National Institute for Radiological Protection, Chinese Center for Disease Control and Protection, Beijing 100088 (China); Zhu Yuen [State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, 19 Xin Jie Kou Wai St., Beijing 100875 (China); Xu Cuihua [National Institute for Radiological Protection, Chinese Center for Disease Control and Protection, Beijing 100088 (China)

    2009-10-15

    The Luanhe River Source Area belongs to typical semi-arid, agro-pastoral ecotone of North China. It is very important for the prevention and treatment of soil erosion in North China to analyze and evaluate quantitatively the recent 30-year changes in the process of soil wind erosion in this area. Based on long field observations, soil samples from different depths in a representative wind-deposited soil profile in the Luanhe River Source Area were collected. Then the {sup 137}Cs activity of soil samples from different depths in the soil profile was determined using a GEM series HPGe (high-purity germanium) coaxial detector system (ADCAM-100), and their soil properties, such as the soil particle fraction and so on, were analyzed. According to the detected {sup 137}Cs activity of different depths, a continuous time sequence of the wind-deposited soil profile in the study area was established. Furthermore, through assumption on a soil relative wind erosion intensity index (SWEI), recent 30-year changes in the process of soil wind erosion in the Luanhe River Source Area were retrospected . The analysis results revealed that weaker soil wind erosion occurred in the study area from the 1970s to the early 1980s and from the late 1980s to the mid to late 1990s. Conversely, intense periods of soil wind erosion occurred in the mid-1980s and from the late 1990s to 2002.

  10. Predicting coastal cliff erosion using a Bayesian probabilistic model

    Science.gov (United States)

    Hapke, Cheryl J.; Plant, Nathaniel G.

    2010-01-01

    Regional coastal cliff retreat is difficult to model due to the episodic nature of failures and the along-shore variability of retreat events. There is a growing demand, however, for predictive models that can be used to forecast areas vulnerable to coastal erosion hazards. Increasingly, probabilistic models are being employed that require data sets of high temporal density to define the joint probability density function that relates forcing variables (e.g. wave conditions) and initial conditions (e.g. cliff geometry) to erosion events. In this study we use a multi-parameter Bayesian network to investigate correlations between key variables that control and influence variations in cliff retreat processes. The network uses Bayesian statistical methods to estimate event probabilities using existing observations. Within this framework, we forecast the spatial distribution of cliff retreat along two stretches of cliffed coast in Southern California. The input parameters are the height and slope of the cliff, a descriptor of material strength based on the dominant cliff-forming lithology, and the long-term cliff erosion rate that represents prior behavior. The model is forced using predicted wave impact hours. Results demonstrate that the Bayesian approach is well-suited to the forward modeling of coastal cliff retreat, with the correct outcomes forecast in 70–90% of the modeled transects. The model also performs well in identifying specific locations of high cliff erosion, thus providing a foundation for hazard mapping. This approach can be employed to predict cliff erosion at time-scales ranging from storm events to the impacts of sea-level rise at the century-scale.

  11. Soil erosion assessment on hillslope of GCE using RUSLE model

    Indian Academy of Sciences (India)

    61

    ;. Environ. Earth Sci. 63 533-541. De Asis A M and Omasa K 2007 Estimation of vegetation parameter for modeling soil erosion using linear Spectral Mixture Analysis of Landsat ETM data; ISPRS J. Photogramm. Remote Sens. 62 309-324.

  12. Understanding the Mechanism of Soil Erosion from Outdoor Model ...

    African Journals Online (AJOL)

    A method for obtaining important data on eroded soils, using a one eight experimental slope model is presented. The scope of the investigation herein described encompassed three locations in the south- eastern parts of Nigeria, which are belts of severe erosion, namely Opi-Nsukka, Agulu and Udi, [Fig. 1.] Soil samples ...

  13. Soil erosion assessment on hillslope of GCE using RUSLE model

    Indian Academy of Sciences (India)

    61

    A new method for obtaining the C factor (i.e. vegetation cover and management factor) of the. RUSLE model .... yearly soil loss in large scale as well as to view the management practices applied to control soil erosion. ...... Folly A, Bronsveld M and Clavaux M 1996 A knowledge-based approach for C-factor mapping in Spain ...

  14. Validation of Water Erosion Prediction Project (WEPP) model for low-volume forest roads

    Science.gov (United States)

    William Elliot; R. B. Foltz; Charlie Luce

    1995-01-01

    Erosion rates of recently graded nongravel forest roads were measured under rainfall simulation on five different soils. The erosion rates observed on 24 forest road erosion plots were compared with values predicted by the Water Erosion Prediction Project (WEPP) Model, Version 93.1. Hydraulic conductivity and soil erodibility values were predicted from methods...

  15. Assessment of wind erosion threat for soils in cadastral area of Hajske

    International Nuclear Information System (INIS)

    Muchova, Z.; Stredanska, A.

    2008-01-01

    This contribution illustrates the application of methods of erosion threat assessment in lan adaptation projects. Calculations of the soil erosion index of particular soil blocks are demonstrated for the cadastral area of Hajske. Two methods for assessment of erosion threat have been applied. First the assessment based on the ecological soil-quality units (ESQU) has been performed. Next, the Pasak method for a detailed analysis of the soil erosion threat was applied. Both of the mentioned approaches are recommended for the land adaption projects. Based on the results, the soil blocks have been ranked by their soil erosion threat. (authors)

  16. Improved diagnostic model for estimating wind energy

    Energy Technology Data Exchange (ETDEWEB)

    Endlich, R.M.; Lee, J.D.

    1983-03-01

    Because wind data are available only at scattered locations, a quantitative method is needed to estimate the wind resource at specific sites where wind energy generation may be economically feasible. This report describes a computer model that makes such estimates. The model uses standard weather reports and terrain heights in deriving wind estimates; the method of computation has been changed from what has been used previously. The performance of the current model is compared with that of the earlier version at three sites; estimates of wind energy at four new sites are also presented.

  17. Wind farm models and control strategies

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, Poul; Hansen, Anca D.; Iov, F.; Blaabjerg, F.; Donovan, M.H.

    2005-08-01

    This report describes models and control strategies for 3 different concepts of wind farms. Initially, the potential in improvement of grid integration, structural loads and energy production is investigated in a survey of opportunities. Then simulation models are described, including wind turbine models for a fixed speed wind turbine with active stall control and a variable speed wind turbine with doubly-fed induction generator. After that, the 3 wind farm concepts and control strategies are described. The 3 concepts are AC connected doubly fed turbines, AC connected active stall turbines and DC connected active stall turbines. Finally, some simulation examples and conclusions are presented. (au)

  18. Colliding Stellar Wind Models with Orbital Motion

    Science.gov (United States)

    Wilkin, Francis P.; O'Connor, Brendan

    2018-01-01

    We present thin-shell models for the collision between two ballistic stellar winds, including orbital motion.The stellar orbits are assumed circular, so that steady-state solutions exist in the rotating frame, where we include centrifugal and Coriolis forces. Exact solutions for the pre-shock winds are incorporated. Here we discuss 2-D model results for equal wind momentum-loss rates, although we allow for the winds to have distinct speeds and mass loss rates. For these unequal wind conditions, we obtain a clear violation of skew-symmetry, despite equal momentum loss rates, due to the Coriolis force.

  19. Wind Tunnel Modeling Of Wind Flow Over Complex Terrain

    Science.gov (United States)

    Banks, D.; Cochran, B.

    2010-12-01

    This presentation will describe the finding of an atmospheric boundary layer (ABL) wind tunnel study conducted as part of the Bolund Experiment. This experiment was sponsored by Risø DTU (National Laboratory for Sustainable Energy, Technical University of Denmark) during the fall of 2009 to enable a blind comparison of various air flow models in an attempt to validate their performance in predicting airflow over complex terrain. Bohlund hill sits 12 m above the water level at the end of a narrow isthmus. The island features a steep escarpment on one side, over which the airflow can be expected to separate. The island was equipped with several anemometer towers, and the approach flow over the water was well characterized. This study was one of only two only physical model studies included in the blind model comparison, the other being a water plume study. The remainder were computational fluid dynamics (CFD) simulations, including both RANS and LES. Physical modeling of air flow over topographical features has been used since the middle of the 20th century, and the methods required are well understood and well documented. Several books have been written describing how to properly perform ABL wind tunnel studies, including ASCE manual of engineering practice 67. Boundary layer wind tunnel tests are the only modelling method deemed acceptable in ASCE 7-10, the most recent edition of the American Society of Civil Engineers standard that provides wind loads for buildings and other structures for buildings codes across the US. Since the 1970’s, most tall structures undergo testing in a boundary layer wind tunnel to accurately determine the wind induced loading. When compared to CFD, the US EPA considers a properly executed wind tunnel study to be equivalent to a CFD model with infinitesimal grid resolution and near infinite memory. One key reason for this widespread acceptance is that properly executed ABL wind tunnel studies will accurately simulate flow separation

  20. Dynamic modeling and simulation of wind turbines

    International Nuclear Information System (INIS)

    Ghafari Seadat, M.H.; Kheradmand Keysami, M.; Lari, H.R.

    2002-01-01

    Using wind energy for generating electricity in wind turbines is a good way for using renewable energies. It can also help to protect the environment. The main objective of this paper is dynamic modeling by energy method and simulation of a wind turbine aided by computer. In this paper, the equations of motion are extracted for simulating the system of wind turbine and then the behavior of the system become obvious by solving the equations. The turbine is considered with three blade rotor in wind direction, induced generator that is connected to the network and constant revolution for simulation of wind turbine. Every part of the wind turbine should be simulated for simulation of wind turbine. The main parts are blades, gearbox, shafts and generator

  1. Model Predictive Control of Wind Turbines

    DEFF Research Database (Denmark)

    Henriksen, Lars Christian

    Wind turbines play a major role in the transformation from a fossil fuel based energy production to a more sustainable production of energy. Total-cost-of-ownership is an important parameter when investors decide in which energy technology they should place their capital. Modern wind turbines...... are controlled by pitching the blades and by controlling the electro-magnetic torque of the generator, thus slowing the rotation of the blades. Improved control of wind turbines, leading to reduced fatigue loads, can be exploited by using less materials in the construction of the wind turbine or by reducing...... the need for maintenance of the wind turbine. Either way, better total-cost-of-ownership for wind turbine operators can be achieved by improved control of the wind turbines. Wind turbine control can be improved in two ways, by improving the model on which the controller bases its design or by improving...

  2. Which measurement strategies to improve spatial erosion and deposition patterns modelling?

    Science.gov (United States)

    Pineux, Nathalie; Maugnard, Alexandre; Swerts, Gilles; Bielders, Charles; Degré, Aurore

    2014-05-01

    Validation of the erosion models requires field data. To date, many authors continue to highlight the paucity of accurate field observations and long-term enough studies. The fields observations are often put aside because these measures are difficult to obtain: weighty experimental devices, climatic dependence, … Hence the models are evolving and propose refined calculation procedures including for instance the calculation of landscape evolution. The need of field data therefore increases and new measuring strategies should arise. In the centre of Belgium we choose an agricultural watershed quite representative of the local context. It covers 124 ha of loamy soil with more than 90% of arable land and a weak proportion of forest and artificial lands. The slope ranges between 0 and 9%. Instrumentation on the watershed includes meteorological observations and discharge measurement coupled with water sampling at different outlets. The weather data (radiation, temperature, wind velocity, relative humidity and rainfall) and discharge measurement (comparison between Doppler and pressure sensors) will allow us to model the hydrological behaviour of the catchment. Rainfall readings (tipping buckets) are completed with erosivity readings (disdrometer). Erosivity, together with soil data, land use and agricultural practices observations on field, will be used as entry in the Landsoil model. The sediment samplings at 3 points in the catchment will give an insight of the sediment delivery of 3 subcatchments. The Landsoil model calculates the evolution of the DTM through time. This cannot be compared to measurements at the outlet and requires further data collection. Older elevation data and/or archaeological data are a possible source of information even if their precision remains scarce in our context. 1950's soil surveys are on the contrary really informative since they detail the horizons depth in a spatial way and can be compared to new observation across the watershed

  3. Extreme gust wind estimation using mesoscale modeling

    DEFF Research Database (Denmark)

    Larsén, Xiaoli Guo; Kruger, Andries

    2014-01-01

    Currently, the existing estimation of the extreme gust wind, e.g. the 50-year winds of 3 s values, in the IEC standard, is based on a statistical model to convert the 1:50-year wind values from the 10 min resolution. This statistical model assumes a Gaussian process that satisfies the classical...... through turbulent eddies. This process is modeled using the mesoscale Weather Forecasting and Research (WRF) model. The gust at the surface is calculated as the largest winds over a layer where the averaged turbulence kinetic energy is greater than the averaged buoyancy force. The experiments have been...

  4. On the Material Characterisation of Wind Turbine Blade Coatings: The Effect of Interphase Coating–Laminate Adhesion on Rain Erosion Performance

    Directory of Open Access Journals (Sweden)

    Enrique Cortés

    2017-09-01

    Full Text Available Rain erosion damage, caused by repeated droplet impact on wind turbine blades, is a major cause for concern, even more so at offshore locations with larger blades and higher tip speeds. Due to the negative economic influence of blade erosion, all wind turbine Original Equipment Manufacturers (OEMs are actively seeking solutions. In most cases, since the surface coating plays a decisive role in the blade manufacture and overall performance, it has been identified as an area where a solution may be obtained. In this research, two main coating technologies have been considered: In-mould coatings (Gel coating applied during moulding on the entire blade surface and the post-mould coatings specifically developed for Leading Edge Protection (LEP. The coating adhesion and erosion is affected by the shock waves created by the collapsing water droplets on impact. The stress waves are reflected and transmitted to the laminate substrate, so microstructural discontinuities in coating layers and interfaces play a key role on its degradation and may accelerate erosion by delamination. Analytical and numerical models are commonly used to relate lifetime prediction and to identify suitable coating and composite substrate combinations based on their potential stress reduction on the interface. Nevertheless, in order to use them, it is necessary to measure the contact adhesion resistance of the multi-layered system interfaces. The rain erosion performance is assessed using an accelerated testing technique, whereby the test material is repeatedly impacted at high speed with water droplets in a Whirling Arm Rain Erosion Rig (WARER. The materials, specifically the coating–laminate interphase region and acoustic properties, are further characterised by several laboratory tests, including Differential Scanning Calorimetry (DSC, pull-off testing, peeling–adhesion testing and nanoindentation testing. This body of work includes a number of case studies. The first case

  5. On the Material Characterisation of Wind Turbine Blade Coatings: The Effect of Interphase Coating-Laminate Adhesion on Rain Erosion Performance.

    Science.gov (United States)

    Cortés, Enrique; Sánchez, Fernando; O'Carroll, Anthony; Madramany, Borja; Hardiman, Mark; Young, Trevor M

    2017-09-28

    Rain erosion damage, caused by repeated droplet impact on wind turbine blades, is a major cause for concern, even more so at offshore locations with larger blades and higher tip speeds. Due to the negative economic influence of blade erosion, all wind turbine Original Equipment Manufacturers (OEMs) are actively seeking solutions. In most cases, since the surface coating plays a decisive role in the blade manufacture and overall performance, it has been identified as an area where a solution may be obtained. In this research, two main coating technologies have been considered: In-mould coatings (Gel coating) applied during moulding on the entire blade surface and the post-mould coatings specifically developed for Leading Edge Protection (LEP). The coating adhesion and erosion is affected by the shock waves created by the collapsing water droplets on impact. The stress waves are reflected and transmitted to the laminate substrate, so microstructural discontinuities in coating layers and interfaces play a key role on its degradation and may accelerate erosion by delamination. Analytical and numerical models are commonly used to relate lifetime prediction and to identify suitable coating and composite substrate combinations based on their potential stress reduction on the interface. Nevertheless, in order to use them, it is necessary to measure the contact adhesion resistance of the multi-layered system interfaces. The rain erosion performance is assessed using an accelerated testing technique, whereby the test material is repeatedly impacted at high speed with water droplets in a Whirling Arm Rain Erosion Rig (WARER). The materials, specifically the coating-laminate interphase region and acoustic properties, are further characterised by several laboratory tests, including Differential Scanning Calorimetry (DSC), pull-off testing, peeling-adhesion testing and nanoindentation testing. This body of work includes a number of case studies. The first case study compares two

  6. Eolian erosion of the Martian surface. I - Erosion rate similitude

    Science.gov (United States)

    Iversen, J. D.; White, B. R.; Greeley, R.; Pollack, J. B.

    1975-01-01

    A similitude parameter is derived which is based on theoretical considerations of erosion due to sand in saltation. This parameter has been used to correlate wind tunnel experiments of particle flow over model craters. The characteristics of the flow field in the vicinity and downstream of a crater are discussed and it is shown that erosion is initiated in areas lying under a pair of trailing vortices. The erosion rate parameter is used to calculate erosion rates on Mars, reported in Part 2, to be published later.

  7. Wind-Farm Parametrisations in Mesoscale Models

    DEFF Research Database (Denmark)

    Volker, Patrick; Badger, Jake; Hahmann, Andrea N.

    2013-01-01

    In this paper we compare three wind-farm parametrisations for mesoscale models against measurement data from the Horns Rev I offshore wind-farm. The parametrisations vary from a simple rotor drag method, to more sophisticated models. Additional to (4) we investigated the horizontal resolution...

  8. Solar wind and cosmic ray irradiation of grains and ices - application to erosion and synthesis of organic compounds in the solar system

    Science.gov (United States)

    Rocard, F.; Benit, J.; Meunier, J. P.; Bibring, R.; Vassent, B.

    1984-01-01

    Solar wind and cosmic and cosmic ray irradiation of grains induces physical and chemical effects including their erosion and the synthesis of molecular compounds within the implanted layers. The experiments performed with H2O ice implanted by keV ions are presented. The ion implantation is intended to simulate the irradiation of comets, ring grains, and satellites of outer planets, either by the primitive solar particles or by contemporary solar wind (SW) or solar cosmic rays (SCR) fluxes. The detection of molecules was obtained through in-situ infrared spectroscopy. A model is proposed for the formation of organic matter within icy solar system bodies which is in agreement with experimental results of erosion rates. The organic molecules, frozen-in within the icy mantles of the grains present in the protosolar nebula, would originate from their primitive irradiation. Such an irradiation would have taken place during an early stage of the proto-sun, when both the SW and SCR particles were more intense by orders of magnitude.

  9. Thermochemical Erosion Modeling of the 25-MM M242/M791 Gun System

    National Research Council Canada - National Science Library

    Sopok, Samuel

    1997-01-01

    The MACE gun barrel thermochemical erosion modeling code addresses wall degradations due to transformations, chemical reactions, and cracking coupled with pure mechanical erosion for the 25-mm M242/M791 gun system...

  10. Evaluating water erosion prediction project model using Cesium-137-derived spatial soil redistribution data

    Science.gov (United States)

    The lack of spatial soil erosion data has been a major constraint on the refinement and application of physically based erosion models. Spatially distributed models can only be thoroughly validated with distributed erosion data. The fallout cesium-137 has been widely used to generate spatial soil re...

  11. Evaluation of the LISEM soil erosion model in two catchments in the East African Highlands

    NARCIS (Netherlands)

    Hessel, R.; Bosch, van den R.; Vigiak, O.

    2006-01-01

    Under increasing population pressure, soil erosion has become a threat in the East African Highlands, and erosion modelling can be useful to quantify this threat. To test its applicability for this region, the LISEM soil erosion model was applied to two small catchments, one in the Usumbara

  12. Implementation of channel-routing routines in the Water Erosion Prediction Project (WEPP) model

    Science.gov (United States)

    Li Wang; Joan Q. Wu; William J. Elliott; Shuhui Dun; Sergey Lapin; Fritz R. Fiedler; Dennis C. Flanagan

    2010-01-01

    The Water Erosion Prediction Project (WEPP) model is a process-based, continuous-simulation, watershed hydrology and erosion model. It is an important tool for water erosion simulation owing to its unique functionality in representing diverse landuse and management conditions. Its applicability is limited to relatively small watersheds since its current version does...

  13. Modelling catchment-scale erosion patterns in the East African Highlands

    NARCIS (Netherlands)

    Vigiak, O.; Okoba, B.O.; Sterk, G.; Groenenberg, S.

    2005-01-01

    Prompt location of areas exposed to high erosion is of the utmost importance for soil and water conservation planning. Erosion models can be useful tools to locate sources of sediment and areas of deposition within a catchment, but the reliability of model predictions of spatial patterns of erosion

  14. Erosion dynamics of powder snow avalanches - model of frontal entrainment

    Science.gov (United States)

    Louge, Michel; Sovilla, Betty

    2013-04-01

    We analyze entrainment at the head of powder snow avalanches (PSA) behaving as an eruption current. Instead of invoking an erosion model or other fitted parameters, the analysis assumes that erosion is sustained by a massive blow-out arising as the snow cover is fluidized by the very pore pressure gradients that the avalanche induces within the snow pack. The stability of a mass balance involving snow cover and flow in the PSA's head region then sets frontal speed, height, mixed-mean density, snowpack fluidization depth, frontal impact pressure and static pressure. We show that acceleration of the front is insensitive to local slope, but effectively depends on the rate of change in cloud width. We compare predictions with data collected at the Vallee de la Sionne.

  15. [Vegetation above-ground biomass and its affecting factors in water/wind erosion crisscross region on Loess Plateau].

    Science.gov (United States)

    Wang, Jian-guo; Fan, Jun; Wang, Quan-jiu; Wang, Li

    2011-03-01

    Field investigations were conducted in Liudaogou small watershed in late September 2009 to study the differences of vegetation above-ground biomass, soil moisture content, and soil nutrient contents under different land use patterns, aimed to approach the vegetation above-ground biomass level and related affecting factors in typical small watershed in water/wind erosion crisscross region on Loess Plateau. The above-ground dry biomass of the main vegetations in Liudaogou was 177-2207 g x m(-2), and that in corn field, millet field, abandoned farmland, artificial grassland, natural grassland, and shrub land was 2097-2207, 518-775, 248-578, 280-545, 177-396, and 372-680 g x m(-2), respectively. The mean soil moisture content in 0-100 layer was the highest (14.2%) in farmlands and the lowest (10.9%) in shrub land. The coefficient of variation of soil moisture content was the greatest (26. 7% ) in abandoned farmland, indicating the strong spatial heterogeneity of soil moisture in this kind of farmland. The mean soil water storage was in the order of farmland > artificial grassland > natural grassland > shrub land. Soil dry layer was observed in alfalfa and caragana lands. There was a significant positive correlation (r = 0.639, P water storage, and also, a very significant positive correlation between above-ground fresh biomass and vegetation height. The above-ground biomass of the higher vegetations could potentially better control the wind and water erosion in the water/wind erosion crisscross region. Vegetation above-ground biomass was highly correlated with soil moisture and nutrient contents, but had no significant correlations with elevation, slope gradient, slope aspect, and soil bulk density.

  16. Wind gust models derived from field data

    Science.gov (United States)

    Gawronski, W.

    1995-01-01

    Wind data measured during a field experiment were used to verify the analytical model of wind gusts. Good coincidence was observed; the only discrepancy occurred for the azimuth error in the front and back winds, where the simulated errors were smaller than the measured ones. This happened because of the assumption of the spatial coherence of the wind gust model, which generated a symmetric antenna load and, in consequence, a low azimuth servo error. This result indicates a need for upgrading the wind gust model to a spatially incoherent one that will reflect the real gusts in a more accurate manner. In order to design a controller with wind disturbance rejection properties, the wind disturbance should be known at the input to the antenna rate loop model. The second task, therefore, consists of developing a digital filter that simulates the wind gusts at the antenna rate input. This filter matches the spectrum of the measured servo errors. In this scenario, the wind gusts are generated by introducing white noise to the filter input.

  17. Probabilistic soil erosion modeling using the Erosion Risk Management Tool (ERMIT) after wildfires

    Science.gov (United States)

    P. R. Robichaud; W. J. Elliot; J. W. Wagenbrenner

    2011-01-01

    The decision of whether or not to apply post-fire hillslope erosion mitigation treatments, and if so, where these treatments are most needed, is a multi-step process. Land managers must assess the risk of damaging runoff and sediment delivery events occurring on the unrecovered burned hillslope. We developed the Erosion Risk Management Tool (ERMiT) to address this need...

  18. Reliability Modeling of Wind Turbines

    DEFF Research Database (Denmark)

    Kostandyan, Erik

    the actions should be made and the type of actions requires knowledge on the accumulated damage or degradation state of the wind turbine components. For offshore wind turbines, the action times could be extended due to weather restrictions and result in damage or degradation increase of the remaining...

  19. Sediment Transport and erosion modeling at Heaundae Beach in Korea.

    Science.gov (United States)

    Do, K.; Yoo, J.; McCall, R. T.

    2016-12-01

    The sand pocket beaches with two headlands are global features, but it's not easy to predict berm and dune erosion due to alongshore variation of water depth. This study investigates the sediment transport and morphological change using available wave and beach profile data, as well as to assess the applicability of the XBeach morphological model (Roelvink et al., 2009). The Haeundae is small pocket beach, 1.4 km long, located in the southern corner of the Korean Peninsula. The Korea Institute of Ocean Science and Technology (KIOST) measured beach profile along 27 survey lines. The beach profiles were surveyed five times from 17 June 2014 to 10 October 2014. For this duration, a wave gauge (AWAC) was installed at a depth about 23 m off the coast of Haeundae Beach. Severe four storms attacked Haeundae Beach for this duration and these storms lasted about 1 2 days with a peak significant wave height of 2.5 4.0 m. The placed sand is fairly sorted and its median diameter is 0.23 mm. 2DH coastal morphological model, XBeach developed to simulate dune erosion due to storm impacts. The model is based on the nonlinear shallow water equation and resolves nearshore hydrodynamics by employing a 2DH description of wave groups and infragravity motions. In this study, the numerical model XBeach was compared with the field data and used to estimate the sediment transport pattern on the sand pocket beach. The numerical model resulted in a comparable prediction in the west-part, but the east-part cannot reproduce the erosion and accretion of the sand, partly due to complex bathymetry and the lack of sediment. This limitation needs to be improved to use measured sand thickness data in future study

  20. Wind Turbine Control: Robust Model Based Approach

    DEFF Research Database (Denmark)

    Mirzaei, Mahmood

    . This is because, on the one hand, control methods can decrease the cost of energy by keeping the turbine close to its maximum efficiency. On the other hand, they can reduce structural fatigue and therefore increase the lifetime of the wind turbine. The power produced by a wind turbine is proportional...... to the square of its rotor radius, therefore it seems reasonable to increase the size of the wind turbine in order to capture more power. However as the size increases, the mass of the blades increases by cube of the rotor size. This means in order to keep structural feasibility and mass of the whole structure...... reasonable, the ratio of mass to size should be reduced. This trend results in more flexible structures. Control of the flexible structure of a wind turbine in a wind field with stochastic nature is very challenging. In this thesis we are examining a number of robust model based methods for wind turbine...

  1. Modelling Wind Turbine Inflow: The Induction Zone

    DEFF Research Database (Denmark)

    Meyer Forsting, Alexander Raul

    to the rotor, but requires exact knowledge of the flow deceleration to estimate the available, undis- turbed kinetic energy. Thus this thesis explores, mostly numerically, any wind turbine or environmental dependencies of this deceleration. The computational fluid dynamics model (CFD) employed is validated......A wind turbine decelerates the wind in front of its rotor by extracting kinetic energy. The wind speed reduction is maximal at the rotor and negligible more than five rotor radii upfront. By measuring wind speed this far from the rotor, the turbine’s performance is determined without any rotor bias...... significant parameter. Exploiting this singu- lar dependency, a fast semi-empirical model is devised that accurately predicts the velocity deficit upstream of a single turbine. Near-rotor mea-surements in combination with this model are able to retrieve the kinetic energy available to the turbine in flat...

  2. Model of wind shear conditional on turbulence and its impact on wind turbine loads

    DEFF Research Database (Denmark)

    Dimitrov, Nikolay Krasimirov; Natarajan, Anand; Kelly, Mark C.

    2015-01-01

    fatigue load is achieved. The proposed wind shear model based on the wind measurements is thereby probabilistic in definition, with shear jointly distributed with wind turbulence. A simplified model for the wind shear exponent is further derived from the full stochastic model. The fatigue loads over......We analyse high-frequency wind velocity measurements from two test stations over a period of several years and at heights ranging from 60 to 200 m, with the objective to validate wind shear predictions as used in load simulations for wind turbine design. A validated wind shear model is thereby...... different turbine components are evaluated under the full wind measurements, using the developed wind shear model and with standard wind conditions prescribed in the IEC 61400-1 ed. 3. The results display the effect of the Wöhler exponent and reveal that under moderate turbulence, the effect of wind shear...

  3. Modelling the wind climate of Ireland

    DEFF Research Database (Denmark)

    Frank, H.P.; Landberg, L.

    1997-01-01

    The wind climate of Ireland has been calculated using the Karlsruhe Atmospheric Mesoscale Model KAMM. The climatology is represented by 65 frequency classes of geostrophic wind that were selected as equiangular direction sectors and speed intervals with equal frequency in a sector. The results ar...

  4. Probabilistic Harmonic Modeling of Wind Power Plants

    DEFF Research Database (Denmark)

    Guest, Emerson; Jensen, Kim H.; Rasmussen, Tonny Wederberg

    2017-01-01

    A probabilistic sequence domain (SD) harmonic model of a grid-connected voltage-source converter is used to estimate harmonic emissions in a wind power plant (WPP) comprised of Type-IV wind turbines. The SD representation naturally partitioned converter generated voltage harmonics into those...

  5. Oceanographic Factors and Erosion of the Outer Banks During Hurricane Isabel

    National Research Council Canada - National Science Library

    Keen, T. R; Rowley, C; Dykes, J

    2006-01-01

    .... The computed wind, wave, current, and water level fields are used to drive a three- dimensional numerical sedimentation model that calculates nearshore sediment transport and erosion potential...

  6. Wind, rain and soil erosion rates on bare and plant covered agriculture plots at the experimental station of El Teularet -Sierra de Enguera, Eastern Spain

    Science.gov (United States)

    Cerdà, A.; Azorin-Molina, C.; Iserloh, Th.

    2012-04-01

    Soil erosion is being scientifically researched for more tan one century, but there is some knowledge lacks that should be researched. Within the factors of the soil erosion wind and rain were studied, but little is know about the impact of the combination of both. Soil erosion by wind was mainly studied on drylands and agriculture land (Sterk and Spaan, 1997; Bielders et al., 2002; Rajot et al., 2003; Zobeck et al., 2003). Soil erosion by water was studied in many ecosystems but it is especially active on agriculture land (Cerdà et al., 2009) and under Mediterranean climatic conditions (Cerdà et al., 2010). The importance of wind on soil erosion is base in the fact that rainstorms occurs with wind, adding a driving component to the falling raindrops. The influence of wind on raindrops is clear, but there is not measurements and there is no information of this influence under field conditions with natural rainfall events.This paper aims to determine the interaction between wind and rain as factors of the soil losses under Mediterranean climatic conditions and different agriculture managements and land uses. Since 2003, the El Teularet-Serra de Enguera Soil Erosion Experimental Station located in Eastern Spain is measuring the soil losses in plots under different land uses and land managements. The station is devoted to study the soil water erosion processes under rain-fed agriculture fields and the rangelands by means of simulated rainfall experiments and plots of different sizes. The soil erosion measure ments are done by means of 13 plots, each of them composed of 5 subplots of 1, 2, 4, 16 and 48 m2 under different land uses and managements. Two plots are covered by two different types of shrubs: Quercus coccifera and Ulex parviflorus, respectively. Three plots reproduce the use of herbicides, one is ploughed, and three plots follow conservation practices (oats and beans with no-tillage, with tillage, and with a vege- tation cover of weeds). Other plots are

  7. Significance of frost action and surface soil characteristics to wind erosion at Rocky Flats, Colorado. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Caine, N.

    1978-09-01

    This study of the potential links between soil freezing and wind erosion was conducted at Rocky Flats during 4 winters. Most of the study has involved the conditions leading to the growth of segregation ice in the surface soil and the ground heave which that produces. This occurs about 15 times in the average winter at Rocky Flats, always on a diurnal cycle. Such frost action is preferentially distributed in time and space and cannot be estimated from air temperatures alone. November and March are the months of most frequent frost heave, and then only in the days following precipitation or snowmelt. The most marked frost effects are found on exposed interfluve and hillcrest situations, where there are patches of bare soil. Almost no effects are found on the valley floors. Soil disturbance by segregation ice leads to a marked decrease in soil bulk density, and presumably in soil strength though this change has not been quantitatively defined. However, this does not lead to wind erosion of the soil at the study site because that surface is more influenced by the vegetation cover than by the soil characteristics.

  8. Alternative methods of modeling wind generation using production costing models

    International Nuclear Information System (INIS)

    Milligan, M.R.; Pang, C.K.

    1996-08-01

    This paper examines the methods of incorporating wind generation in two production costing models: one is a load duration curve (LDC) based model and the other is a chronological-based model. These two models were used to evaluate the impacts of wind generation on two utility systems using actual collected wind data at two locations with high potential for wind generation. The results are sensitive to the selected wind data and the level of benefits of wind generation is sensitive to the load forecast. The total production cost over a year obtained by the chronological approach does not differ significantly from that of the LDC approach, though the chronological commitment of units is more realistic and more accurate. Chronological models provide the capability of answering important questions about wind resources which are difficult or impossible to address with LDC models

  9. Thermomechanical Erosion Modelling of Baydaratskaya Bay, Russia with COSMOS

    NARCIS (Netherlands)

    Pearson, S.G.; Lubbad, R; Le, T.M.H.; Nairn, Rob

    2016-01-01

    Rapid coastal erosion threatens Arctic coastal infrastructure, including communities and industrial installations. Erosion of permafrost depends on numerous processes, including thermal and mechanical behaviour of frozen and unfrozen soil, nearshore hydrodynamics, atmospheric forcing, and the

  10. Mechanics of aeolian processes: Soil erosion and dust production

    Science.gov (United States)

    Mehrabadi, M. M.

    1989-01-01

    Aeolian (wind) processes occur as a result of atmosphere/land-surface system interactions. A thorough understanding of these processes and their physical/mechanical characterization on a global scale is essential to monitoring global change and, hence, is imperative to the fundamental goal of the Earth observing system (Eos) program. Soil erosion and dust production by wind are of consequence mainly in arid and semi arid regions which cover 36 percent of the Earth's land surface. Some recent models of dust production due to wind erosion of agricultural soils and the mechanics of wind erosion in deserts are reviewed and the difficulties of modeling the aeolian transport are discussed.

  11. Wind reduction patterns around isolated biomass for wind erosion control in a desertified area of Central Sudan

    NARCIS (Netherlands)

    Nasr Al-amin, N.K.; Stigter, C.J.; El-Tayeb Mohammed, A.

    2010-01-01

    The aim of this study was to assess the effectiveness of sparse vegetation, feature common in arid zone, to reduce wind force (velocity) and hence protect the surface and regions downwind from drifting sand and their consequences. Respectively 4 (with heights h of 4, 3.2, 2 and 1.66 m), 2 (with h of

  12. Modeling Innovations Advance Wind Energy Industry

    Science.gov (United States)

    2009-01-01

    In 1981, Glenn Research Center scientist Dr. Larry Viterna developed a model that predicted certain elements of wind turbine performance with far greater accuracy than previous methods. The model was met with derision from others in the wind energy industry, but years later, Viterna discovered it had become the most widely used method of its kind, enabling significant wind energy technologies-like the fixed pitch turbines produced by manufacturers like Aerostar Inc. of Westport, Massachusetts-that are providing sustainable, climate friendly energy sources today.

  13. Spectral coherence model for power fluctuations in a wind farm

    DEFF Research Database (Denmark)

    Vigueras-Rodriguez, A.; Sørensen, Poul Ejnar; Viedma, A.

    2012-01-01

    This paper provides a model for the coherence between wind speeds located in a horizontal plane corresponding to hub height of wind turbines in a large wind farm. The model has been developed using wind speed and power measurements from the 72 Wind Turbines and two of the meteorological masts from...

  14. Modelling Soil Erosion in the Densu River Basin Using RUSLE and GIS Tools.

    Science.gov (United States)

    Ashiagbori, G; Forkuo, E K; Laari, P; Aabeyir, R

    2014-07-01

    Soil erosion involves detachment and transport of soil particles from top soil layers, degrading soil quality and reducing the productivity of affected lands. Soil eroded from the upland catchment causes depletion of fertile agricultural land and the resulting sediment deposited at the river networks creates river morphological change and reservoir sedimentation problems. However, land managers and policy makers are more interested in the spatial distribution of soil erosion risk than in absolute values of soil erosion loss. The aim of this paper is to model the spatial distribution of soil erosion in Densu River Basin of Ghana using RUSLE and GIS tools and to use the model to explore the relationship between erosion susceptibility, slope and land use/land cover (LULC) in the Basin. The rainfall map, digital elevation model, soil type map, and land cover map, were input data in the soil erosion model developed. This model was then categorized into four different erosion risk classes. The developed soil erosion map was then overlaid with the slope and LULC maps of the study area to explore their effects on erosion susceptibility of the soil in the Densu River Basin. The Model, predicted 88% of the basin as low erosion risk and 6% as moderate erosion risk, 3% as high erosion risk and 3% as severe risk. The high and severe erosion areas were distributed mainly within the areas of high slope gradient and also sections of the moderate forest LULC class. Also, the areas within the moderate forest LULC class found to have high erosion risk, had an intersecting high erodibility soil group.

  15. Time Series Model of Wind Speed for Multi Wind Turbines based on Mixed Copula

    Directory of Open Access Journals (Sweden)

    Nie Dan

    2016-01-01

    Full Text Available Because wind power is intermittent, random and so on, large scale grid will directly affect the safe and stable operation of power grid. In order to make a quantitative study on the characteristics of the wind speed of wind turbine, the wind speed time series model of the multi wind turbine generator is constructed by using the mixed Copula-ARMA function in this paper, and a numerical example is also given. The research results show that the model can effectively predict the wind speed, ensure the efficient operation of the wind turbine, and provide theoretical basis for the stability of wind power grid connected operation.

  16. Mesoscale to microscale wind farm flow modeling and evaluation: Mesoscale to Microscale Wind Farm Models

    Energy Technology Data Exchange (ETDEWEB)

    Sanz Rodrigo, Javier [National Renewable Energy Centre (CENER), Sarriguren Spain; Chávez Arroyo, Roberto Aurelio [National Renewable Energy Centre (CENER), Sarriguren Spain; Moriarty, Patrick [National Renewable Energy Laboratory (NREL), Golden CO USA; Churchfield, Matthew [National Renewable Energy Laboratory (NREL), Golden CO USA; Kosović, Branko [National Center for Atmospheric Research (NCAR), Boulder CO USA; Réthoré, Pierre-Elouan [Technical University of Denmark (DTU), Roskilde Denmark; Hansen, Kurt Schaldemose [Technical University of Denmark (DTU), Lyngby Denmark; Hahmann, Andrea [Technical University of Denmark (DTU), Roskilde Denmark; Mirocha, Jeffrey D. [Lawrence Livermore National Laboratory, Livermore CA USA; Rife, Daran [DNV GL, San Diego CA USA

    2016-08-31

    The increasing size of wind turbines, with rotors already spanning more than 150 m diameter and hub heights above 100 m, requires proper modeling of the atmospheric boundary layer (ABL) from the surface to the free atmosphere. Furthermore, large wind farm arrays create their own boundary layer structure with unique physics. This poses significant challenges to traditional wind engineering models that rely on surface-layer theories and engineering wind farm models to simulate the flow in and around wind farms. However, adopting an ABL approach offers the opportunity to better integrate wind farm design tools and meteorological models. The challenge is how to build the bridge between atmospheric and wind engineering model communities and how to establish a comprehensive evaluation process that identifies relevant physical phenomena for wind energy applications with modeling and experimental requirements. A framework for model verification, validation, and uncertainty quantification is established to guide this process by a systematic evaluation of the modeling system at increasing levels of complexity. In terms of atmospheric physics, 'building the bridge' means developing models for the so-called 'terra incognita,' a term used to designate the turbulent scales that transition from mesoscale to microscale. This range of scales within atmospheric research deals with the transition from parameterized to resolved turbulence and the improvement of surface boundary-layer parameterizations. The coupling of meteorological and wind engineering flow models and the definition of a formal model evaluation methodology, is a strong area of research for the next generation of wind conditions assessment and wind farm and wind turbine design tools. Some fundamental challenges are identified in order to guide future research in this area.

  17. Small Signal Modeling of Wind Farms

    DEFF Research Database (Denmark)

    Ebrahimzadeh, Esmaeil; Blaabjerg, Frede; Wang, Xiongfei

    2017-01-01

    In large power electronic systems like a wind farm, the mutual interactions between the control systems of the power converters can lead to various stability and power quality problems. In order to predict the system dynamic behavior, this paper presents an approach to model a wind farm as a Multi......-Input Multi-Output (MIMO) dynamic system, where the current control loops with Phase-Locked Loops (PLLs) are linearized around an operating point. Each sub-module of the wind farm is modeled as a 2×2 admittance matrix in dq-domain and all are combined together by using a dq nodal admittance matrix....... The frequency and damping of the oscillatory modes are calculated by finding the poles of the introduced MIMO matrix. Time-domain simulation results obtained from a 400-MW wind farm are used to verify the effectiveness of the presented model....

  18. Erosion Modeling of the High Contraction Chromium Plated Crusader Gun System

    National Research Council Canada - National Science Library

    Sopok, S

    2003-01-01

    Thermal-chemical- mechanical erosion modeling predictions are given for the high contraction chromium plated Crusader gun system based on extensive cannon firing, inspection, characterization, and experimental data...

  19. Soil erosion risk assessment using interviews, empirical soil erosion modeling (RUSLE) and fallout radionuclides in a volcanic crater lake watershed subjected to land use change, western Uganda

    Science.gov (United States)

    De Crop, Wannes; Ryken, Nick; Tomma Okuonzia, Judith; Van Ranst, Eric; Baert, Geert; Boeckx, Pascal; Verschuren, Dirk; Verdoodt, Ann

    2017-04-01

    Population pressure results in conversion of natural vegetation to cropland within the western Ugandan crater lake watersheds. These watersheds however are particularly prone to soil degradation and erosion because of the high rainfall intensity and steep topography. Increased soil erosion losses expose the aquatic ecosystems to excessive nutrient loading. In this study, the Katinda crater lake watershed, which is already heavily impacted by agricultural land use, was selected for an explorative study on its (top)soil characteristics - given the general lack of data on soils within these watersheds - as well as an assessment of soil erosion risks. Using group discussions and structured interviews, the local land users' perceptions on land use, soil quality, soil erosion and lake ecology were compiled. Datasets on rainfall, topsoil characteristics, slope gradient and length, and land use were collected. Subsequently a RUSLE erosion model was run. Results from this empirical erosion modeling approach were validated against soil erosion estimates based on 137Cs measurements.

  20. Interactive effects of moss-dominated crusts and Artemisia ordosica on wind erosion and soil moisture in Mu Us sandland, China.

    Science.gov (United States)

    Yang, Yongsheng; Bu, Chongfeng; Mu, Xingmin; Shao, Hongbo; Zhang, Kankan

    2014-01-01

    To better understand the effects of biological soil crusts (BSCs) on soil moisture and wind erosion and study the necessity and feasibility of disturbance of BSCs in the Mu Us sandland, the effects of four treatments, including moss-dominated crusts alone, Artemisia ordosica alone, bare sand, and Artemisia ordosica combined with moss-dominated crusts, on rainwater infiltration, soil moisture, and annual wind erosion were observed. The major results are as follows. (1) The development of moss-dominated crusts exacerbated soil moisture consumption and had negative effects on soil moisture in the Mu Us sandland. (2) Moss-dominated crusts significantly increased soil resistance to wind erosion, and when combined with Artemisia ordosica, this effect became more significant. The contribution of moss-dominated crusts under Artemisia ordosica was significantly lower than that of moss-dominated crusts alone in sites where vegetative coverage > 50%. (3) Finally, an appropriate disturbance of moss-dominated crusts in the rainy season in sites with high vegetative coverage improved soil water environment and vegetation succession, but disturbance in sites with little or no vegetative cover should be prohibited to avoid the exacerbation of wind erosion.

  1. Interactive Effects of Moss-Dominated Crusts and Artemisia ordosica on Wind Erosion and Soil Moisture in Mu Us Sandland, China

    Science.gov (United States)

    Yang, Yongsheng; Bu, Chongfeng; Mu, Xingmin; Shao, Hongbo; Zhang, Kankan

    2014-01-01

    To better understand the effects of biological soil crusts (BSCs) on soil moisture and wind erosion and study the necessity and feasibility of disturbance of BSCs in the Mu Us sandland, the effects of four treatments, including moss-dominated crusts alone, Artemisia ordosica alone, bare sand, and Artemisia ordosica combined with moss-dominated crusts, on rainwater infiltration, soil moisture, and annual wind erosion were observed. The major results are as follows. (1) The development of moss-dominated crusts exacerbated soil moisture consumption and had negative effects on soil moisture in the Mu Us sandland. (2) Moss-dominated crusts significantly increased soil resistance to wind erosion, and when combined with Artemisia ordosica, this effect became more significant. The contribution of moss-dominated crusts under Artemisia ordosica was significantly lower than that of moss-dominated crusts alone in sites where vegetative coverage > 50%. (3) Finally, an appropriate disturbance of moss-dominated crusts in the rainy season in sites with high vegetative coverage improved soil water environment and vegetation succession, but disturbance in sites with little or no vegetative cover should be prohibited to avoid the exacerbation of wind erosion. PMID:24982973

  2. Interactive Effects of Moss-Dominated Crusts and Artemisia ordosica on Wind Erosion and Soil Moisture in Mu Us Sandland, China

    Directory of Open Access Journals (Sweden)

    Yongsheng Yang

    2014-01-01

    Full Text Available To better understand the effects of biological soil crusts (BSCs on soil moisture and wind erosion and study the necessity and feasibility of disturbance of BSCs in the Mu Us sandland, the effects of four treatments, including moss-dominated crusts alone, Artemisia ordosica alone, bare sand, and Artemisia ordosica combined with moss-dominated crusts, on rainwater infiltration, soil moisture, and annual wind erosion were observed. The major results are as follows. (1 The development of moss-dominated crusts exacerbated soil moisture consumption and had negative effects on soil moisture in the Mu Us sandland. (2 Moss-dominated crusts significantly increased soil resistance to wind erosion, and when combined with Artemisia ordosica, this effect became more significant. The contribution of moss-dominated crusts under Artemisia ordosica was significantly lower than that of moss-dominated crusts alone in sites where vegetative coverage > 50%. (3 Finally, an appropriate disturbance of moss-dominated crusts in the rainy season in sites with high vegetative coverage improved soil water environment and vegetation succession, but disturbance in sites with little or no vegetative cover should be prohibited to avoid the exacerbation of wind erosion.

  3. Rain erosion of wind turbine blade coatings using discrete water jets: Effects of water cushioning, substrate geometry, impact distance, and coating properties

    DEFF Research Database (Denmark)

    Zhang, Shizhong; Dam-Johansen, Kim; Bernad, Pablo L.

    2015-01-01

    Rapid and reliable rain erosion screening of blade coatings for wind turbines is a strong need in the coatings industry. One possibility in this direction is the use of discrete water jets, where so-called jet slugs are impacted on a coating surface. Previous investigations have mapped the influe......Rapid and reliable rain erosion screening of blade coatings for wind turbines is a strong need in the coatings industry. One possibility in this direction is the use of discrete water jets, where so-called jet slugs are impacted on a coating surface. Previous investigations have mapped......, impact, hardness, and abrasion experiments, were also conducted. The ranking of abrasion resistance of the blade coatings was in agreement with the ranking of rain erosion resistance measured in the whirling arm rig (an industrial standard).Results of this work, with more pertinent parameters explored...

  4. The Rangeland Hydrology and Erosion Model: A dynamic approach for predicting soil loss on rangelands

    Science.gov (United States)

    In this study we present the improved Rangeland Hydrology and Erosion Model (RHEM V2.3), a process-based erosion prediction tool specific for rangeland application. The article provides the mathematical formulation of the model and parameter estimation equations. Model performance is assessed agains...

  5. Prediction models for wind speed at turbine locations in a wind farm

    DEFF Research Database (Denmark)

    Knudsen, Torben; Bak, Thomas; Soltani, Mohsen

    2011-01-01

    turbulence models. The esti- mator includes a nonlinear time varying wind speed model, which compared with literature results in an adaptive filter. Given the estimated effective wind speed, it is possible to establish wind speed prediction models by system identification. As the prediction models are based...... manifested through the wind field is hence required. This paper develops models for this relationship. The result is based on two new contributions: the first is related to the estimation of effective wind speeds, which serves as a basis for the second contribution to wind speed prediction models. Based...... on standard turbine measurements such as rotor speed and power produced, an effective wind speed, which represents the wind field averaged over the rotor disc, is derived. The effective wind speed estimator is based on a continuous–discrete extended Kalman filter that takes advantage of nonlinear time varying...

  6. Multivariable Wind Modeling in State Space

    DEFF Research Database (Denmark)

    Sichani, Mahdi Teimouri; Pedersen, B. J.

    2011-01-01

    -spectral density matrix a frequency response matrix is constructed which determines the turbulence vector as a linear filtration of Gaussian white noise. Finally, an accurate state space modeling method is proposed which allows selection of an appropriate model order, and estimation of a state space model......Turbulence of the incoming wind field is of paramount importance to the dynamic response of wind turbines. Hence reliable stochastic models of the turbulence should be available from which time series can be generated for dynamic response and structural safety analysis. In the paper an empirical...... cross-spectral density function for the along-wind turbulence component over the rotor plane is taken as the starting point. The spectrum is spatially discretized in terms of a Hermitian cross-spectral density matrix for the turbulence state vector which turns out not to be positive definite. Since...

  7. Verification of high-speed solar wind stream forecasts using operational solar wind models

    DEFF Research Database (Denmark)

    Reiss, Martin A.; Temmer, Manuela; Veronig, Astrid M.

    2016-01-01

    and the background solar wind conditions. We found that both solar wind models are capable of predicting the large-scale features of the observed solar wind speed (root-mean-square error, RMSE ≈100 km/s) but tend to either overestimate (ESWF) or underestimate (WSA) the number of high-speed solar wind streams (threat...

  8. Wind atlas for South Africa: wind measurements and micro-scale modelling

    CSIR Research Space (South Africa)

    Szewczuk, S

    2010-08-01

    Full Text Available . This paper will discuss the wind atlas method, provide an overview of the wind resource in South Africa, wind measurements that are being undertaken as well as the micro-scale modelling that is planned to be done as part of the Wind Atlas for South Africa...

  9. Modelling and Measuring Flow and Wind Turbine Wakes in Large Wind Farms Offshore

    DEFF Research Database (Denmark)

    Barthelmie, Rebecca Jane; Hansen, Kurt Schaldemose; Frandsen, Sten Tronæs

    2009-01-01

    Average power losses due to wind turbine wakes are of the order of 10 to 20% of total power output in large offshore wind farms. Accurately quantifying power losses due to wakes is, therefore, an important part of overall wind farm economics. The focus of this research is to compare different types...... power losses due to wakes and loads. The research presented is part of the EC-funded UpWind project, which aims to radically improve wind turbine and wind farm models in order to continue to improve the costs of wind energy. Reducing wake losses, or even reduce uncertainties in predicting power losses...... from wakes, contributes to the overall goal of reduced costs. Here, we assess the state of the art in wake and flow modelling for offshore wind forms, the focus so for has been cases at the Horns Rev wind form, which indicate that wind form models require modification to reduce under-prediction of wake...

  10. Filament winding cylinders. I - Process model

    Science.gov (United States)

    Lee, Soo-Yong; Springer, George S.

    1990-01-01

    A model was developed which describes the filament winding process of composite cylinders. The model relates the significant process variables such as winding speed, fiber tension, and applied temperature to the thermal, chemical and mechanical behavior of the composite cylinder and the mandrel. Based on the model, a user friendly code was written which can be used to calculate (1) the temperature in the cylinder and the mandrel, (2) the degree of cure and viscosity in the cylinder, (3) the fiber tensions and fiber positions, (4) the stresses and strains in the cylinder and in the mandrel, and (5) the void diameters in the cylinder.

  11. Effect of erosion on the solar wind stand-off distance at Mercury

    Energy Technology Data Exchange (ETDEWEB)

    Slavin, J.A.; Holzer, R.E.

    1979-05-01

    Recent studies have provided quantitative measurements of the effect of dayside magnetic reconnection on the position of the earth's forward magnetopause. By scaling these terrestrial observations to Mercury, it is predicted that the mean solar wind stand-off distance for average solar wind dynamic pressure conditions will be 0.2--0.7 R/sub m/ inward from its 'ground state' position. Furthermore, it is expected that the magnetopause will be eroded and/or compressed to within 0.2R/sub m/ of Mercury's surface a significant portion of the time. Empirical formulae derived for the earth's magnetosphere are used to determine both solar wind stand-off distances and solar wind dynamic pressures for the two Mariner 10 encounters with Mercury's magnetosphere. It is found that for the first encounter when the interplanetary magnetic field was often southward and substorm signatures are observed inside the magnetosphere, the mean stand-off distance inferred from the boundary crossings is 1.5R/sub m/(for P/sub s/w=6.0 x 10/sup 8/dynes/cm/sup 2/). At the time of the final encounter, the Mariner 10 magnetometer observed no significant southward component in the IMF and no substorm activity was evident. For this encounter, the mean inferred stand-off distance is 1.9R/sub m/ consistent with the expected effects of magnetic flux transfer within a terrestrial-type magnetosphere. A dipole moment of 6 +- 2 x 10/sup 22/ G-cm/sup 3/ is calculated from the observed bow shock and magnetopause positions. Finally, the importance of magnetic flux transfer in the solar wind-magnetospher-atmosphere-surface interaction at Mercury is briefly discussed.

  12. Wind tunnel tests of biodegradable fugitive dust suppressants being considered to reduce soil erosion by wind at radioactive waste construction sites

    International Nuclear Information System (INIS)

    Ligotke, M.W.; Dennis, G.W.; Bushaw, L.L.

    1993-10-01

    Wind tunnel tests were performed of three fugitive dust control agents derived from potato and sugar beet products. These materials are being considered for use as dust suppressants to reduce the potential for transport of radioactive materials by wind from radioactive waste construction and remediation sites. Soil and dust control agent type, solution concentrations, application quantities, aging (or drying) conditions, surface disturbance, and wind and saltating sand eolian erosive stresses were selected and controlled to simulate application and exposure of excavated soil surfaces in the field. A description of the tests, results, conclusions, and recommendations are presented in this report. The results of this study indicate that all three dust control agents can protect exposed soil surfaces from extreme eolian stresses. It is also clear that the interaction and performance of each agent with various soil types may differ dramatically. Thus, soils similar to that received from ML should be best protected by high concentration (∼2.5%) solutions of potato starch at low water application levels (∼1 to 2 L/m 2 ). Because the effectiveness of PS on this soil type is degraded after a moderate amount of simulated rainfall, other options or additives should be considered if surfaces are to be protected for long intervals or during periods of intermittent rainfall and hot, windy conditions. On the other hand, XDCA should be considered when excavating sandy soils. It should be noted, however, that because the Hanford soil test results are based on a small number of tests, it would be prudent to perform additional tests prior to selecting a fugitive dust control agent for use at the Hanford Site. While fermented potato waste was not the best fixative used on either soil, it did perform reasonably well on both soil types (better than XDCA on Idaho soil and better than PS on Hanford soil)

  13. Wind tunnel tests of biodegradable fugitive dust suppressants being considered to reduce soil erosion by wind at radioactive waste construction sites

    Energy Technology Data Exchange (ETDEWEB)

    Ligotke, M.W.; Dennis, G.W.; Bushaw, L.L.

    1993-10-01

    Wind tunnel tests were performed of three fugitive dust control agents derived from potato and sugar beet products. These materials are being considered for use as dust suppressants to reduce the potential for transport of radioactive materials by wind from radioactive waste construction and remediation sites. Soil and dust control agent type, solution concentrations, application quantities, aging (or drying) conditions, surface disturbance, and wind and saltating sand eolian erosive stresses were selected and controlled to simulate application and exposure of excavated soil surfaces in the field. A description of the tests, results, conclusions, and recommendations are presented in this report. The results of this study indicate that all three dust control agents can protect exposed soil surfaces from extreme eolian stresses. It is also clear that the interaction and performance of each agent with various soil types may differ dramatically. Thus, soils similar to that received from ML should be best protected by high concentration ({approximately}2.5%) solutions of potato starch at low water application levels ({approximately}1 to 2 L/m{sup 2}). Because the effectiveness of PS on this soil type is degraded after a moderate amount of simulated rainfall, other options or additives should be considered if surfaces are to be protected for long intervals or during periods of intermittent rainfall and hot, windy conditions. On the other hand, XDCA should be considered when excavating sandy soils. It should be noted, however, that because the Hanford soil test results are based on a small number of tests, it would be prudent to perform additional tests prior to selecting a fugitive dust control agent for use at the Hanford Site. While fermented potato waste was not the best fixative used on either soil, it did perform reasonably well on both soil types (better than XDCA on Idaho soil and better than PS on Hanford soil).

  14. Erosion over time on severely disturbed granitic soils: a model

    Science.gov (United States)

    W. F. Megahan

    1974-01-01

    A negative exponential equation containing three parameters was derived to describe time trends in surface erosion on severely disturbed soils. Data from four different studies of surface erosion on roads constructed from the granitic materials found in the Idaho Batholith were used to develop equation parameters. The evidence suggests that surface "armoring...

  15. Parameterization of erodibility in the Rangeland Hydrology and Erosion Model

    Science.gov (United States)

    The magnitude of erosion from a hillslope is governed by the availability of sediment and connectivity of runoff and erosion processes. For undisturbed rangelands, sediment is primarily detached and transported by rainsplash and sheetflow (splash-sheet) processes in isolated bare batches, but sedime...

  16. understanding the mechanism of soil erosion from outdoor model ...

    African Journals Online (AJOL)

    Dr Obe

    Finally by distorted scale laws, data for the natural slopes were synthesised to produce the hydrologic quantities; slope erosion and average infiltration rates for the soils. INTRODUCTION. In most parts of the world subject to heavy rain, erosion by overland flow is of common occurrence. This is particularly true of three belts ...

  17. Simulating climate change impact on soil erosion using RUSLE model

    Indian Academy of Sciences (India)

    Climate change, particularly due to the changed precipitation trend, can have a severe impact on soil erosion. The effect is more pronounced on the higher slopes of the Himalayan region. The goal of this study was to estimate the impact of climate change on soil erosion in a watershed of the Himalayan region using ...

  18. Recent findings related to measuring and modeling forest road erosion

    Science.gov (United States)

    W. J. Elliot; R. B. Foltz; P. R. Robichaud

    2009-01-01

    Sediment is the greatest pollutant of forest streams. In the absence of wildfire, forest road networks are usually the main source of sediment in forest watersheds. An understanding of forest road erosion processes is important to aid in predicting sediment delivery from roads to streams. The flowpath followed by runoff is the key to understanding road erosion...

  19. Wind models for the NSTS ascent trajectory biasing for wind load alleviation

    Science.gov (United States)

    Smith, O. E.; Adelfang, S. I.; Batts, G. W.

    1990-01-01

    New concepts are presented for aerospace vehicle ascent wind profile biasing. The purpose for wind biasing the ascent trajectory is to provide ascent wind loads relief and thus decrease the probability for launch delays due to wind loads exceeding critical limits. Wind biasing trajectories to the the profile of monthly mean winds have been widely used for this purpose. The wind profile models presented give additional alternatives for wind biased trajectories. They are derived from the properties of the bivariate normal probability function using the available wind statistical parameters for the launch site. The analytical expressions are presented to permit generalizations. Specific examples are given to illustrate the procedures. The wind profile models can be used to establish the ascent trajectory steering commands to guide the vehicle through the first stage. For the National Space Transportation System (NSTS) program these steering commands are called I-loads.

  20. Statistical Modelling of Wind Proles - Data Analysis and Modelling

    DEFF Research Database (Denmark)

    Jónsson, Tryggvi; Pinson, Pierre

    The aim of the analysis presented in this document is to investigate whether statistical models can be used to make very short-term predictions of wind profiles.......The aim of the analysis presented in this document is to investigate whether statistical models can be used to make very short-term predictions of wind profiles....

  1. Developing a parameterization approach of soil erodibility for the Rangeland Hydrology and Erosion Model (RHEM)

    Science.gov (United States)

    Soil erodibility is a key factor for estimating soil erosion using physically based models. In this study, a new parameterization approach for estimating erodibility was developed for the Rangeland Hydrology and Erosion Model (RHEM). The approach uses empirical equations that were developed by apply...

  2. Developing soil erodibility prediction equations for the Rangeland Hydrology and Erosion Model (RHEM)

    Science.gov (United States)

    Soil erodibility is a key factor for estimating soil erosion using physically based models. In this study, a new parameterization approach for estimating erodibility was developed for the Rangeland Hydrology and Erosion Model (RHEM). The approach uses empirical equations that were developed by apply...

  3. A new in situ model to study erosive enamel wear, a clinical pilot study.

    NARCIS (Netherlands)

    Ruben, J.L.; Truin, G.J.; Bronkhorst, E.M.; Huysmans, M.C.D.N.J.M.

    2017-01-01

    OBJECTIVES: To develop an in situ model for erosive wear research which allows for more clinically relevant exposure parameters than other in situ models and to show tooth site-specific erosive wear effect of an acid challenge of orange juice on enamel. METHODS: This pilot study included 6

  4. A semi-empirical model to assess uncertainty of spatial patterns of erosion

    NARCIS (Netherlands)

    Sterk, G.; Vigiak, O.; Romanowicz, R.J.; Beven, K.J.

    2006-01-01

    Distributed erosion models are potentially good tools for locating soil sediment sources and guiding efficient Soil and Water Conservation (SWC) planning, but the uncertainty of model predictions may be high. In this study, the distribution of erosion within a catchment was predicted with a

  5. Physical erosion modelling of complex morphodynamics in the upper Val d'Orcia: a combination of EROSION 3D, UAV, SFM and CANUPO

    Science.gov (United States)

    Buchholz, Arno; Kaiser, Andreas; Neugirg, Fabian; Schindewolf, Marcus; Schmidt, Jürgen

    2017-04-01

    Throughout the Mediterranean Basin soil erosion is both a widely spread and a landscape shaping process. In order to increase the understanding of morphodynamics inside large Italian badland areas, so called Calanchi, the process based erosion model EROSION 3D was parameterized by artificial rainfall simulations, soil sampling and an UAV based high resolution digital elevation model. Vegetation structures were removed with the CANUPO-classifier in CloudCompare. The rainfall experiments proved to be a convenient but costly tool for deriving the model input parameters. While building up the model, different composition of the inhomogeneous soil surface was considered. A diverse behavior against erosion by water was observed. The results showed that the deposition surfaces of rotational or translational slides, besides calanco depth contour, tend to degrade. Although these deposits present a comparatively low bulk density, they reduce the infiltration due to soil surface clogging and cause less erosion resistances. The differential consideration of erosion sub-processes turns out as particularly challenging. The simulation of a reference year showed an annual soil export from the catchment of 43 t/ha, which corresponds to an average surface lowering of 3 mm. Sheet erosion represents an amount of about 5% of the total erosion of badlands. Furthermore, infiltration depth, amount of runoff, sediment concentration, and grain size composition of the deposits were calculated. This study makes a contribution to the understanding of denudation processes in Calanchi badlands. The presented process-based modeling of badlands is contributing a new aspect to erosion research.

  6. Validation of the filament winding process model

    Science.gov (United States)

    Calius, Emilo P.; Springer, George S.; Wilson, Brian A.; Hanson, R. Scott

    1987-01-01

    Tests were performed toward validating the WIND model developed previously for simulating the filament winding of composite cylinders. In these tests two 24 in. long, 8 in. diam and 0.285 in. thick cylinders, made of IM-6G fibers and HBRF-55 resin, were wound at + or - 45 deg angle on steel mandrels. The temperatures on the inner and outer surfaces and inside the composite cylinders were recorded during oven cure. The temperatures inside the cylinders were also calculated by the WIND model. The measured and calculated temperatures were then compared. In addition, the degree of cure and resin viscosity distributions inside the cylinders were calculated for the conditions which existed in the tests.

  7. Wind turbine noise modeling : a comparison of modeling methods

    International Nuclear Information System (INIS)

    Wang, L.; Strasser, A.

    2009-01-01

    All wind turbine arrays must undergo a noise impact assessment. DataKustik GmbH developed the Computer Aided Noise Abatement (Cadna/A) modeling software for calculating noise propagation to meet accepted protocols and international standards such as CONCAWE and ISO 9613 standards. The developer of Cadna/A, recommended the following 3 models for simulating wind turbine noise. These include a disk of point sources; a ring of point sources located at the tip of each blade; and a point source located at the top of the wind turbine tower hub. This paper presented an analytical comparison of the 3 models used for a typical wind turbine with a hub tower containing 3 propeller blades, a drive-train and top-mounted generator, as well as a representative wind farm, using Cadna/A. AUC, ISO and IEC criteria requirements for the meteorological input with Cadna/A for wind farm noise were also discussed. The noise predicting modelling approach was as follows: the simplest model, positioning a single point source at the top of the hub, can be used to predict sound levels for a typical wind turbine if receptors are located 250 m from the hub; a-weighted sound power levels of a wind turbine at cut-in and cut-off wind speed should be used in the models; 20 by 20 or 50 by 50 meter terrain parameters are suitable for large wind farm modeling; and ISO 9613-2 methods are recommended to predict wind farm noise with various metrological inputs based on local conditions. The study showed that the predicted sound level differences of the 3 wind turbine models using Cadna/A are less than 0.2 dB at receptors located greater than 250 m from the wind turbine hub, which fall within the accuracy range of the calculation method. All 3 models of wind turbine noise meet ISO9613-2 standards for noise prediction using Cadna/A. However, the single point source model was found to be the most efficient in terms of modeling run-time among the 3 models. 7 refs., 3 tabs., 15 figs.

  8. Modeling of the dynamics of wind to power conversion including high wind speed behavior

    DEFF Research Database (Denmark)

    Litong-Palima, Marisciel; Bjerge, Martin Huus; Cutululis, Nicolaos Antonio

    2016-01-01

    This paper proposes and validates an efficient, generic and computationally simple dynamic model for the conversion of the wind speed at hub height into the electrical power by a wind turbine. This proposed wind turbine model was developed as a first step to simulate wind power time series...... speed shutdowns and restarts are represented as on–off switching rules that govern the output of the wind turbine at extreme wind speed conditions. The model uses the concept of equivalent wind speed, estimated from the single point (hub height) wind speed using a second-order dynamic filter...... measurements available from the DONG Energy offshore wind farm Horns Rev 2. Copyright © 2015 John Wiley & Sons, Ltd....

  9. Parametrization of the increase of the aeolian erosion threshold wind friction velocity due to soil moisture for arid and semi-arid areas

    Directory of Open Access Journals (Sweden)

    F. Fécan

    1999-01-01

    Full Text Available Large-scale simulation of the soil-derived dust emission in semi-arid regions needs to account for the influence of the soil moisture on the wind erosion threshold. Soil water retention consists of molecular adsorption on the soil grain surface and capillary forces between the grain. Interparticle capillary forces (characterized by the moisture tension are the main factor responsible for the increase of the wind erosion threshold observed when the soil moisture increases. When the soil moisture content is close to but smaller than the maximum amount of adsorbed water, w' (depending on the soil texture, these capillary forces are considered as not strong enough to significantly increase the erosion threshold. An expression of the moisture tension as a function of soil moisture and w' is derived from retention curves. From this expression, a parametrization of the ratio of the wet to dry erosion thresholds has been developed as a function of soil moisture and soil texture. The coefficients of this parametrization have been determined by using experimental data from the literature. An empirical relationship between w' and soil clay content has been established. The erosion threshold ratios simulated for different soil textures were found to be in good agreement with the experimental data.Key words. Atmospheric composition and structure (Aerosols and particles · Hydrology (soil moisture

  10. Parametrization of the increase of the aeolian erosion threshold wind friction velocity due to soil moisture for arid and semi-arid areas

    Energy Technology Data Exchange (ETDEWEB)

    Fecan, F.; Marticorena, B.; Bergametti, G. [Paris-7 Univ. (France). Lab. Interuniversitaire des Systemes Atmospheriques

    1999-01-01

    Large-scale simulation of the soil-derived dust emission in semiarid regions needs to account for the influence of the soil moisture on the wind erosion threshold. Soil water retention consists of molecular adsorption on the soil grain surface and capillary forces between the grain. Interparticle capillary forces (characterized by the moisture tension) are the main factor responsible for the increase of the wind erosion threshold observed when the soil moisture increases. When the soil moisture content is close to but smaller than the maximum amount of adsorbed water, w` (depending on the soil texture), these capillary forces are considered as not strong enough to significantly increase the erosion threshold. An expression of the moisture tension as a function of soil moisture and w` is derived from retention curves. From this expression, a parametrization of the ratio of the wet to dry erosion thresholds has been developed as a function of soil moisture and soil texture. The coefficients of this parametrization have been determined by using experimental data from the literature. An empirical relationship between w` and soil clay content has been established. The erosion threshold ratios simulated for different soil textures were found to be in good agreement with the experimental data. (orig.) 24 refs.

  11. Parametrization of the increase of the aeolian erosion threshold wind friction velocity due to soil moisture for arid and semi-arid areas

    Directory of Open Access Journals (Sweden)

    F. Fécan

    Full Text Available Large-scale simulation of the soil-derived dust emission in semi-arid regions needs to account for the influence of the soil moisture on the wind erosion threshold. Soil water retention consists of molecular adsorption on the soil grain surface and capillary forces between the grain. Interparticle capillary forces (characterized by the moisture tension are the main factor responsible for the increase of the wind erosion threshold observed when the soil moisture increases. When the soil moisture content is close to but smaller than the maximum amount of adsorbed water, w' (depending on the soil texture, these capillary forces are considered as not strong enough to significantly increase the erosion threshold. An expression of the moisture tension as a function of soil moisture and w' is derived from retention curves. From this expression, a parametrization of the ratio of the wet to dry erosion thresholds has been developed as a function of soil moisture and soil texture. The coefficients of this parametrization have been determined by using experimental data from the literature. An empirical relationship between w' and soil clay content has been established. The erosion threshold ratios simulated for different soil textures were found to be in good agreement with the experimental data.

    Key words. Atmospheric composition and structure (Aerosols and particles · Hydrology (soil moisture

  12. Selecting and applying cesium-137 conversion models to estimate soil erosion rates in cultivated fields.

    Science.gov (United States)

    Li, Sheng; Lobb, David A; Tiessen, Kevin H D; McConkey, Brian G

    2010-01-01

    The fallout radionuclide cesium-137 ((137)Cs) has been successfully used in soil erosion studies worldwide. However, discrepancies often exist between the erosion rates estimated using various conversion models. As a result, there is often confusion in the use of the various models and in the interpretation of the data. Therefore, the objective of this study was to test the structural and parametrical uncertainties associated with four conversion models typically used in cultivated agricultural landscapes. For the structural uncertainties, the Soil Constituent Redistribution by Erosion Model (SCREM) was developed and used to simulate the redistribution of fallout (137)Cs due to tillage and water erosion along a simple two-dimensional (horizontal and vertical) transect. The SCREM-predicted (137)Cs inventories were then imported into the conversion models to estimate the erosion rates. The structural uncertainties of the conversion models were assessed based on the comparisons between the conversion-model-estimated erosion rates and the erosion rates determined or used in the SCREM. For the parametrical uncertainties, test runs were conducted by varying the values of the parameters used in the model, and the parametrical uncertainties were assessed based on the responsive changes of the estimated erosion rates. Our results suggest that: (i) the performance/accuracy of the conversion models was largely dependent on the relative contributions of water vs. tillage erosion; and (ii) the estimated erosion rates were highly sensitive to the input values of the reference (137)Cs level, particle size correction factors and tillage depth. Guidelines were proposed to aid researchers in selecting and applying the conversion models under various situations common to agricultural landscapes.

  13. Process-oriented modelling to identify main drivers of erosion-induced carbon fluxes

    Science.gov (United States)

    Wilken, Florian; Sommer, Michael; Van Oost, Kristof; Bens, Oliver; Fiener, Peter

    2017-05-01

    Coupled modelling of soil erosion, carbon redistribution, and turnover has received great attention over the last decades due to large uncertainties regarding erosion-induced carbon fluxes. For a process-oriented representation of event dynamics, coupled soil-carbon erosion models have been developed. However, there are currently few models that represent tillage erosion, preferential water erosion, and transport of different carbon fractions (e.g. mineral bound carbon, carbon encapsulated by soil aggregates). We couple a process-oriented multi-class sediment transport model with a carbon turnover model (MCST-C) to identify relevant redistribution processes for carbon dynamics. The model is applied for two arable catchments (3.7 and 7.8 ha) located in the Tertiary Hills about 40 km north of Munich, Germany. Our findings indicate the following: (i) redistribution by tillage has a large effect on erosion-induced vertical carbon fluxes and has a large carbon sequestration potential; (ii) water erosion has a minor effect on vertical fluxes, but episodic soil organic carbon (SOC) delivery controls the long-term erosion-induced carbon balance; (iii) delivered sediments are highly enriched in SOC compared to the parent soil, and sediment delivery is driven by event size and catchment connectivity; and (iv) soil aggregation enhances SOC deposition due to the transformation of highly mobile carbon-rich fine primary particles into rather immobile soil aggregates.

  14. Nutrient losses by wind and water, measurements and modelling

    NARCIS (Netherlands)

    Visser, S.M.; Stroosnijder, L.; Chardon, W.J.

    2005-01-01

    In the Sahelian zone of West-Africa, erosion by both wind and water causes a serious decline in fertility of the already low fertile soils. Despite the fact that the flow of nutrients has been intensively investigated by the use of nutrient balances, little attention has been paid to the

  15. Assessing soil erosion using USLE model and MODIS data in the Guangdong, China

    Science.gov (United States)

    Gao, Feng; Wang, Yunpeng; Yang, Jingxue

    2017-07-01

    In this study, soil erosion in the Guangdong, China during 2012 was quantitatively assessed using Universal Soil Loss Equation (USLE). The parameters of the model were calculated using GIS and MODIS data. The spatial distribution of the average annual soil loss on grid basis was mapped. The estimated average annual soil erosion in Guangdong in 2012 is about 2294.47t/ (km2.a). Four high sensitive area of soil erosion in Guangdong in 2012 was found. The key factors of these four high sensitive areas of soil erosion were significantly contributed to the land cover types, rainfall and Economic development and human activities.

  16. Simulation analysis of a wind farm with different aggregated models

    DEFF Research Database (Denmark)

    Li, H.; Wang, H.; Zhao, B.

    2011-01-01

    Based on a wind farm including wind turbines with squirrel cage induction generators (SCIGs), different aggregated models of a wind farm, such as a single weighted average model, a reduced-order re-scaled model, a parameter transformed model and a single weighted arithmetic model were presented, ...

  17. Changes in wind erosion over a 25-year restoration chronosequence on the south edge of the Tengger Desert, China: implications for preventing desertification.

    Science.gov (United States)

    Ma, Quanlin; Fehmi, Jeffrey S; Zhang, Dekui; Fan, Baoli; Chen, Fang

    2017-08-23

    Wind erosion is a primary cause of desertification as well as being a serious ecological problem in arid and semi-arid areas across the world. To determine mechanisms for restoring desertified lands, an unrestored shifting sand dune and three formerly shifting sand dunes (desertified lands) that had been enclosed and afforested for 5, 15, and 25 years were selected for evaluation on the south edge of the Tengger Desert, China. Based on sampling heights between 0.2 and 3 m, the critical threshold average wind speed was 6.5 m s -1 at 2 m where the sand transport rate was reduced from 285.9 kg m -2  h -1 on the unrestored dunes to 9.1 and 1.8 kg m -2  h -1 on the sites afforested and enclosed for 5 and 15 years, respectively. The percentage of wind eroded area was reduced from 99.9% on the unrestored dune to 94.5, 9.0, and 0.5% on the sites afforested and enclosed for 5, 15, and 25 years, respectively. Wind erosion was effectively reduced after 15 years. Although there were different driving factors for wind erosion mitigation on the different restoration stages, an increase in the vegetation cover, surface roughness, soil shear strength, soil clay content, organic matter, and reduction in the near-surface wind speed were the primary variables associated with the restoration chronosequence. We conclude that reducing the wind speed and developing a biological crust through vegetation restoration were the critical components for restoration of desertified land.

  18. IEA Wind Task 37: Systems Modeling Framework and Ontology for Wind Turbines and Plants

    Energy Technology Data Exchange (ETDEWEB)

    Dykes, Katherine L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zahle, Frederik [Technical University of Denmark; Merz, Karl [SINTEF Energy Research; McWilliam, Mike [Technical University of Denmark; Bortolotti, Pietro [Technical University Munich

    2017-08-14

    This presentation will provide an overview of progress to date in the development of a system modeling framework and ontology for wind turbines and plants as part of the larger IEA Wind Task 37 on wind energy systems engineering. The goals of the effort are to create a set of guidelines for a common conceptual architecture for wind turbines and plants so that practitioners can more easily share descriptions of wind turbines and plants across multiple parties and reduce the effort for translating descriptions between models; integrate different models together and collaborate on model development; and translate models among different levels of fidelity in the system.

  19. Stochastic Modeling Of Wind Turbine Drivetrain Components

    DEFF Research Database (Denmark)

    Rafsanjani, Hesam Mirzaei; Sørensen, John Dalsgaard

    2014-01-01

    reliable components are needed for wind turbine. In this paper focus is on reliability of critical components in drivetrain such as bearings and shafts. High failure rates of these components imply a need for more reliable components. To estimate the reliability of these components, stochastic models...

  20. Modeling of water erosion by seagis model. Case Watershed Dam Siliana

    International Nuclear Information System (INIS)

    Chabaan, Chayma

    2016-01-01

    water erosion is a complicated phenomenon, largely obvious in north Africa, especially in the watershed of Siliana, where natural factors and the aggressiveness of the environment do affect the loss of soil there, which characterized by a form so uneven with attitudes that vary from 700 to 1350 m rigid going from 5 to 10 pour cent and sometimes more. Moreover, it has drained with a thick hydrographic network. Generally, water erosion depends of the importance and the frequent agent factor of this erosion ( rain and streaming), soil type, the topography and the occupation of soil. The usage of mathematic models has to take on consideration of these parameters. The main objective of this work consist in developing put into affect a geomatic approach of stimulation which aims at estimate in time and space, the impact of the climate, and the soil occupation on the water erosion and the transportation of the sediments diversions into sliding of a small watershed. Locally, this approach allows evaluating the parameters of water erosion of SEAGIS model (USLE/RUSLE) to an extent that is identifies and drowing the emergency areas of intervention in the watershed of Siliana.

  1. SimWIND: A geospatial infrastructure model for optimizing wind power generation and transmission

    International Nuclear Information System (INIS)

    Phillips, Benjamin R.; Middleton, Richard S.

    2012-01-01

    Wind is a clean, enduring energy resource with the capacity to satisfy 20% or more of U.S. electricity demand. Presently, wind potential is limited by a paucity of electrical transmission lines and/or capacity between promising wind resources and primary load centers. We present the model SimWIND to address this shortfall. SimWIND is an integrated optimization model for the geospatial arrangement and cost minimization of wind-power generation–transmission–delivery infrastructure. Given a set of possible wind-farm sites, the model simultaneously determines (1) where and how much power to generate and (2) where to build new transmission infrastructure and with what capacity in order to minimize the cost for delivering a targeted amount of power to load. Costs and routing of transmission lines consider geographic and social constraints as well as electricity losses. We apply our model to the Electric Reliability Council of Texas (ERCOT) Interconnection, considering scenarios that deliver up to 20 GW of new wind power. We show that SimWIND could potentially reduce ERCOT's projected ∼$5B transmission network upgrade line length and associated costs by 50%. These results suggest that SimWIND's coupled generation–transmission–delivery modeling approach could play a critical role in enhancing planning efforts and reducing costs for wind energy integration. - Highlights: ► Wind power is limited by transmission capacity between resources and demands. ► SimWIND is a coupled generation-transmission-delivery model for wind infrastructure. ► The model minimizes costs considering realistic transmission routing and networking. ► We show that SimWIND could save 50% of $5B costs for expanding the Texas grid. ► Results suggest SimWIND may play a critical role in enhancings wind planning efforts.

  2. Modelling of Soil Erosion by Non Conventional Methods

    OpenAIRE

    Ganesh D. Kale; Sheela N. Vadsola

    2012-01-01

    Soil erosion is the most serious problem faced at global and local level. So planning of soil conservation measures has become prominent agenda in the view of water basin managers. To plan for the soil conservation measures, the information on soil erosion is essential. Universal Soil Loss Equation (USLE), Revised Universal Soil Loss Equation 1 (RUSLE1or RUSLE) and Modified Universal Soil Loss Equation (MUSLE), RUSLE 1.06, RUSLE1.06c, RUSLE2 are most widely used conventio...

  3. Pitchcontrol of wind turbines using model free adaptivecontrol based on wind turbine code

    DEFF Research Database (Denmark)

    Zhang, Yunqian; Chen, Zhe; Cheng, Ming

    2011-01-01

    value is only based on I/O data of the wind turbine is identified and then the wind turbine system is replaced by a dynamic linear time-varying model. In order to verify the correctness and robustness of the proposed model free adaptive pitch controller, the wind turbine code FAST which can predict...

  4. Actuator disk model of wind farms based on the rotor average wind speed

    DEFF Research Database (Denmark)

    Han, Xing Xing; Xu, Chang; Liu, De You

    2016-01-01

    Due to difficulty of estimating the reference wind speed for wake modeling in wind farm, this paper proposes a new method to calculate the momentum source based on the rotor average wind speed. The proposed model applies volume correction factor to reduce the influence of the mesh recognition...

  5. Soil Erosion and Sediment Yield Modelling in the Pra River Basin of ...

    African Journals Online (AJOL)

    Parameters of the model were formatted as raster layers and multiplied using the raster calculator module in ArcGIS to produce a soil erosion map. The concept of sediment delivery ratio (SDR) was used to determine the annual sediment yield of the catchment by integrating a raster SDR layer with that of the soil erosion ...

  6. Adapting the Water Erosion Prediction Project (WEPP) model for forest applications

    Science.gov (United States)

    Shuhui Dun; Joan Q. Wu; William J. Elliot; Peter R. Robichaud; Dennis C. Flanagan; James R. Frankenberger; Robert E. Brown; Arthur C. Xu

    2009-01-01

    There has been an increasing public concern over forest stream pollution by excessive sedimentation due to natural or human disturbances. Adequate erosion simulation tools are needed for sound management of forest resources. The Water Erosion Prediction Project (WEPP) watershed model has proved useful in forest applications where Hortonian flow is the major form of...

  7. Modelling spatial scales of water erosion in the West Usambara Mountains of Tanzania

    NARCIS (Netherlands)

    Vigiak, O.; van Loon, E.E.; Sterk, G.

    2006-01-01

    This study assessed the ability of several models to locate areas affected by severe erosion and identified the factors controlling the distribution of erosion in a catchment characterized by a dynamic Hortonian hydrologic regime. The spatial patterns of severely eroded areas predicted by five

  8. Numerical modelling of the erosion and deposition of sand inside a filter layer

    DEFF Research Database (Denmark)

    Jacobsen, Niels Gjøl; van Gent, Marcel R. A.; Fredsøe, Jørgen

    2017-01-01

    This paper treats the numerical modelling of the behaviour of a sand core covered by rocks and exposed to waves. The associated displacement of the rock is also studied. A design that allows for erosion and deposition of the sand core beneath a rock layer in a coastal structure requires an accurate...... prediction method to assure that the amount of erosion remains within acceptable limits. This work presents a numerical model that is capable of describing the erosion and deposition patterns inside of an open filter of rock on top of sand. The hydraulic loading is that of incident irregular waves...... additional data sets on the erosion and deposition patterns inside of an open filter. A few cases are defined to study the effect of the sinking of the filter into the erosion hole. The numerical model is also applied to several application cases. The response of the core material (sand) to changes...

  9. Wind Turbine and Wind Power Plant Modelling Aspects for Power System Stability Studies

    DEFF Research Database (Denmark)

    Altin, Müfit; Hansen, Anca Daniela; Göksu, Ömer

    2014-01-01

    is not reasonable regarding the focus of the study. Therefore the power system operators should be aware of the modelling aspects of the wind power considering the related stability study and implement the required model in the appropriate power system toolbox. In this paper, the modelling aspects of wind turbines...... and wind power plants are reviewed for power system stability studies. Important remarks of the models are presented by means of simulations to emphasize the impact of these modelling details on the power system.......Large amount of wind power installations introduce modeling challenges for power system operators at both the planning and operational stages of power systems. Depending on the scope of the study, the modeling details of the wind turbine or the wind power plant are required to be different. A wind...

  10. Modelling catchment soil erosion: a critique of Morgan-Morgan-Finney model and a revised approach

    Science.gov (United States)

    Peñuela, Andres; Sellami, Haykel; Smith, Hugh

    2017-04-01

    Intensive agricultural practices have critically contributed to the global increase in soil erosion rates and sediment fluxes. In order to reduce the impact of these practices, models able to represent the effect of land use changes are needed. Conceptual erosion models allow simulation of soil erosion rates and catchment-scale sediment fluxes over multi-decadal periods or longer, while still retaining a general description of runoff and sediment generation processes. The Morgan-Morgan-Finney model (MMF) is a conceptual annual erosion model that retains the simplicity of RUSLE yet has a stronger physical base. MMF also enables representation of the effects of changes in land cover on soil erosion. However, the most recent versions of the model, namely the Revised MMF and the Modified MMF, contain several errors and limitations that have a large effect on model outputs. First, both model versions incorrectly apply the equation to calculate the kinetic energy of the leaf drainage. Second, ground cover is assumed to have a protective effect against runoff erosion only and not against rainfall erosion. Third, when the simulated annual runoff is very low or negligible, the equations to predict soil loss become independent of the runoff. Fourth, neither version of MMF takes into account seasonal variations in vegetation cover and climate. We propose a revised approach to correct these limitations. This includes the following modifications: a) monthly computation to capture seasonal variability in climate and land cover, b) a new approach to simulate the ground cover protective effect, and c) a new representation of the catchment hydrology based on a soil moisture model and the delineation of contributing areas according to the topographic wetness index (TWI). The proposed model, called MMF-TWI, was applied in an agricultural catchment in the UK and performance compared to the previous version of the model. The Modified MMF simulated considerable sediment yields, despite

  11. Unsteady aerodynamic modelling of wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Coton, F.N.; Galbraith, R.A. [Univ. og Glasgow, Dept. of Aerospace Engineering, Glasgow (United Kingdom)

    1997-08-01

    The following current and future work is discussed: Collaborative wind tunnel based PIV project to study wind turbine wake structures in head-on and yawed flow. Prescribed wake model has been embedded in a source panel representation of the wind tunnel walls to allow comparison with experiment; Modelling of tower shadow using high resolution but efficient vortex model in tower shadow domain; Extension of model to yawing flow; Upgrading and tuning of unsteady aerodynamic model for low speed, thick airfoil flows. Glasgow has a considerable collection of low speed dynamic stall data. Currently, the Leishman - Beddoes model is not ideally suited to such flows. For example: Range of stall onset criteria used for dynamic stall prediction including Beddoes. Wide variation of stall onset prediction. Beddoes representation was developed primarily with reference to compressible flows. Analyses of low speed data from Glasgow indicate deficiencies in the current model; Predicted versus measured response during ramp down motion. Modification of the Beddoes representation is required to obtain a fit with the measured data. (EG)

  12. Modelling soil transport by wind in drylands

    International Nuclear Information System (INIS)

    Hassan, M.H.A.

    1994-01-01

    Understanding the movement of windblown soil particles and the resulting formation of complex surface features are among the most intriguing problems in dryland research. This understanding can only be achieved trough physical and mathematical modelling and must also involve observational data and laboratory experiments. Some current mathematical models that have contributed to the basic understanding of the transportation and deposition of soil particles by wind are presented and solved in these notes. (author). 26 refs, 5 figs

  13. Modelling soil carbon fate under erosion process in vineyard

    Science.gov (United States)

    Novara, Agata; Scalenghe, Riccardo; Minacapilli, Mario; Maltese, Antonino; Capodici, Fulvio; Borgogno Mondino, Enrico; Gristina, Luciano

    2017-04-01

    Soil erosion processes in vineyards beyond water runoff and sediment transport have a strong effect on soil organic carbon loss (SOC) and redistribution along the slope. The variation of SOC across the landscape determines a difference in soil fertility and vine productivity. The aim of this research was to study erosion of a Mediterranean vineyard, develop an approach to estimate the SOC loss, correlate the vines vigor with sediment and carbon erosion. The study was carried out in a Sicilian (Italy) vineyard, planted in 2011. Along the slope, six pedons were studied by digging 6 pits up to 60cm depth. Soil was sampled in each pedon every 10cm and SOC was analyzed. Soil erosion, detachment and deposition areas were measured by pole height method. The vigor of vegetation was expressed in term of NDVI (Normalized difference Vegetation Index) derived from a satellite image (RapidEye) acquired at berry pre-veraison stage (July) and characterized by 5 spectral bands in the shortwave region, including a band in the red wavelength (R, 630-685 nm) and in the near infrared (NIR, 760-850 nm) . Results showed that soil erosion, sediments redistribution and SOC across the hill was strongly affected by topographic features, slope and curvature. The erosion rate was 46Mg ha-1 y-1 during the first 6 years since planting. The SOC redistribution was strongly correlated with the detachment or deposition area as highlighted by pole height measurements. The approach developed to estimate the SOC loss showed that during the whole study period the off-farm SOC amounts to 1.6Mg C ha-1. As highlighted by NDVI results, the plant vigor is strong correlated with SOC content and therefore, developing an accurate NDVI approach could be useful to detect the vineyard areas characterized by low fertility due to erosion process.

  14. Wind farm electrical power production model for load flow analysis

    International Nuclear Information System (INIS)

    Segura-Heras, Isidoro; Escriva-Escriva, Guillermo; Alcazar-Ortega, Manuel

    2011-01-01

    The importance of renewable energy increases in activities relating to new forms of managing and operating electrical power: especially wind power. Wind generation is increasing its share in the electricity generation portfolios of many countries. Wind power production in Spain has doubled over the past four years and has reached 20 GW. One of the greatest problems facing wind farms is that the electrical power generated depends on the variable characteristics of the wind. To become competitive in a liberalized market, the reliability of wind energy must be guaranteed. Good local wind forecasts are therefore essential for the accurate prediction of generation levels for each moment of the day. This paper proposes an electrical power production model for wind farms based on a new method that produces correlated wind speeds for various wind farms. This method enables a reliable evaluation of the impact of new wind farms on the high-voltage distribution grid. (author)

  15. CFD Based Erosion Modelling of Abrasive Waterjet Nozzle using Discrete Phase Method

    International Nuclear Information System (INIS)

    Kamarudin, Naqib Hakim; Prasada Rao, A K; Azhari, Azmir

    2016-01-01

    In Abrasive Waterjet (AWJ) machining, the nozzle is the most critical component that influences the performance, precision and economy. Exposure to a high speed jet and abrasives makes it susceptible to wear erosion which requires for frequent replacement. The present works attempts to simulate the erosion of the nozzle wall using computational fluid dynamics. The erosion rate of the nozzle was simulated under different operating conditions. The simulation was carried out in several steps which is flow modelling, particle tracking and erosion rate calculation. Discrete Phase Method (DPM) and K-ε turbulence model was used for the simulation. Result shows that different operating conditions affect the erosion rate as well as the flow interaction of water, air and abrasives. The simulation results correlates well with past work. (paper)

  16. Effects of Yaw Error on Wind Turbine Running Characteristics Based on the Equivalent Wind Speed Model

    Directory of Open Access Journals (Sweden)

    Shuting Wan

    2015-06-01

    Full Text Available Natural wind is stochastic, being characterized by its speed and direction which change randomly and frequently. Because of the certain lag in control systems and the yaw body itself, wind turbines cannot be accurately aligned toward the wind direction when the wind speed and wind direction change frequently. Thus, wind turbines often suffer from a series of engineering issues during operation, including frequent yaw, vibration overruns and downtime. This paper aims to study the effects of yaw error on wind turbine running characteristics at different wind speeds and control stages by establishing a wind turbine model, yaw error model and the equivalent wind speed model that includes the wind shear and tower shadow effects. Formulas for the relevant effect coefficients Tc, Sc and Pc were derived. The simulation results indicate that the effects of the aerodynamic torque, rotor speed and power output due to yaw error at different running stages are different and that the effect rules for each coefficient are not identical when the yaw error varies. These results may provide theoretical support for optimizing the yaw control strategies for each stage to increase the running stability of wind turbines and the utilization rate of wind energy.

  17. Ion and sulfate-isotope ratios in arid soils subject to wind erosion in the southwestern USA

    Energy Technology Data Exchange (ETDEWEB)

    Schlesinger, W.H.; Peterjohn, W.T.

    Our objective was to evaluate the potential for arid-land soil dusts to contribute significantly to the content of SO/sub 4//sup 2 -/ and other ions in precipitation. Soil samples collected at 102 locations throughout southwestern USA deserts were extracted with distilled water and analyzed for major ionic constituents and the stable isotope ratios (/sup 34/S//sup 32/S) in soluble sulfate. Most samples were dominated by Ca/sup 2 +/ and HCO/sub 3//sup -/, and were undersaturated with respect to gypsum. Only a weak correlation was found between Ca/sup 2 +/ and SO/sub 4//sup 2 -/ in samples from upland sites. Median delta /sup 34/S of soil SO/sub 4/ was +6.2 per thousand compared to +3.9 per thousand reported for precipitation. However, the median ratios for Ca/SO/sub 4/ (12.00) and Mg/SO/sub 4/ (1.84) in soil extracts were much larger than the same ratios in precipitation, suggesting that wind erosion of undisturbed desert soils is not a major source of the SO/sub 4/ in precipitation. Calcite aerosols from desert soils may act to neutralize acid rain in the western USA.

  18. Modelling streambank erosion potential using maximum entropy in a central Appalachian watershed

    Directory of Open Access Journals (Sweden)

    J. Pitchford

    2015-03-01

    Full Text Available We used maximum entropy to model streambank erosion potential (SEP in a central Appalachian watershed to help prioritize sites for management. Model development included measuring erosion rates, application of a quantitative approach to locate Target Eroding Areas (TEAs, and creation of maps of boundary conditions. We successfully constructed a probability distribution of TEAs using the program Maxent. All model evaluation procedures indicated that the model was an excellent predictor, and that the major environmental variables controlling these processes were streambank slope, soil characteristics, bank position, and underlying geology. A classification scheme with low, moderate, and high levels of SEP derived from logistic model output was able to differentiate sites with low erosion potential from sites with moderate and high erosion potential. A major application of this type of modelling framework is to address uncertainty in stream restoration planning, ultimately helping to bridge the gap between restoration science and practice.

  19. Modeling lifetime of high power IGBTs in wind power applications

    DEFF Research Database (Denmark)

    Busca, Cristian

    2011-01-01

    The wind power industry is continuously developing bringing to the market larger and larger wind turbines. Nowadays reliability is more of a concern than in the past especially for the offshore wind turbines since the access to offshore wind turbines in case of failures is both costly and difficult....... Lifetime modeling of future large wind turbines is needed in order to make reliability predictions about these new wind turbines early in the design phase. By doing reliability prediction in the design phase the manufacturer can ensure that the new wind turbines will live long enough. This paper represents...... an overview of the different aspects of lifetime modeling of high power IGBTs in wind power applications. In the beginning, wind turbine reliability survey results are briefly reviewed in order to gain an insight into wind turbine subassembly failure rates and associated downtimes. After that the most common...

  20. Economic performance indicators of wind energy based on wind speed stochastic modeling

    International Nuclear Information System (INIS)

    D’Amico, Guglielmo; Petroni, Filippo; Prattico, Flavio

    2015-01-01

    Highlights: • We propose a new and different wind energy production indicator. • We compute financial profitability of potential wind power sites. • The wind speed process is modeled as an indexed semi-Markov chain. • We check if the wind energy is a good investment with and without incentives. - Abstract: We propose the computation of different wind energy production indicators and financial profitability of potential wind power sites. The computation is performed by modeling the wind speed process as an indexed semi-Markov chain to predict and simulate the wind speed dynamics. We demonstrate that the indexed semi-Markov chain approach enables reproducing the indicators calculated on real data. Two different time horizons of 15 and 30 years are analyzed. In the first case we consider the government incentives on the energy price now present in Italy, while in the second case the incentives have not been taken into account

  1. IEA Wind Task 37 System Modeling Framework and Ontology for Wind Turbines and Plants

    NARCIS (Netherlands)

    Dykes, K; Sanchez Perez Moreno, S.; Zahle, Frederik; Ning, A; McWilliam, M.; Zaayer, M B

    2017-01-01

    This presentation will provide an overview of progress to date in the development of a system modeling framework and ontology for wind turbines and plants as part of the larger IEA Wind Task 37 on wind energy systems engineering. The goals of the effort are to create a set of guidelines for a common

  2. Modelling of offshore wind turbine wakes with the wind farm program FLaP

    DEFF Research Database (Denmark)

    Lange, B.; Waldl, H.P.; Guerrero, A.G.

    2003-01-01

    The wind farm layout program FLaP estimates the wind speed at any point in a wind farm and the power output of the turbines. The ambient flow conditions and the properties of the turbines and the farm are used as input. The core of the program is an axisymmetric wake model describing the wake...

  3. Guest Editorial Modeling and Advanced Control of Wind Turbines/Wind Farms

    Energy Technology Data Exchange (ETDEWEB)

    Hu, J.; Hou, Y.; Zhu, Z.; Xu, D.; Xu, D.; Muljadi, E.; Liu, F.; Iwanski, G.; Geng, H.; Erlich, I.; Wen, J.; Harnefors, L.; Fan, L.; El Moursi, M. S.; Kjaer, P. C.; Nelson, R. J.; Cardenas, R.; Feng, S.; Islam, S.; Qiao, W.; Yuan, X.

    2017-09-01

    The papers in this special section brings together papers focused on the recent advancements and breakthroughs in the technology of modeling and enhanced active/reactive power control of wind power conversion systems, ranging from components of wind turbines to wind farms.

  4. An improved canopy wind model for predicting wind adjustment factors and wildland fire behavior

    Science.gov (United States)

    W. J. Massman; J. M. Forthofer; M. A. Finney

    2017-01-01

    The ability to rapidly estimate wind speed beneath a forest canopy or near the ground surface in any vegetation is critical to practical wildland fire behavior models. The common metric of this wind speed is the "mid-flame" wind speed, UMF. However, the existing approach for estimating UMF has some significant shortcomings. These include the assumptions that...

  5. Model Predictive Control with Constraints of a Wind Turbine

    DEFF Research Database (Denmark)

    Henriksen, Lars Christian; Poulsen, Niels Kjølstad

    2007-01-01

    Model predictive control of wind turbines offer a more systematic approach of constructing controllers that handle constraints while focusing on the main control objective. In this article several controllers are designed for different wind conditions and appropriate switching conditions ensure...... an efficient control of the wind turbine over the entire range of wind speeds. Both onshore and floating offshore wind turbines are tested with the controllers....

  6. Vegetation in drylands: Effects on wind flow and aeolian sediment transport

    Science.gov (United States)

    Drylands are characterised by patchy vegetation, erodible surfaces and erosive aeolian processes. Empirical and modelling studies have shown that vegetation elements provide drag on the overlying airflow, thus affecting wind velocity profiles and altering erosive dynamics on desert surfaces. However...

  7. Modeling the effects of vegetation-erosion coupling on landscape evolution

    Science.gov (United States)

    Collins, D. B. G.; Bras, R. L.; Tucker, G. E.

    2004-09-01

    From rainfall interception at the canopy to added soil cohesion within the root zone, plants play a significant role in directing local geomorphic dynamics, and vice versa. The consequences at the regional scale, however, are known in less quantitative terms. In light of this, the numerical Channel-Hillslope Integrated Landscape Development model is equipped with coupled vegetation-erosion dynamics, allowing for sensitivity analysis on the various aspects of vegetation behavior. The processes considered are plant growth, plant death, and the additional resistance imparted by plants against erosion. With each process is associated a single parameter, whose effects on the spatiotemporal nature of a 1 km2 basin is studied. Through their inhibition of erosion, plants steepened the topography and reduced drainage density, yet, in doing so, made erosive events more extreme. Plants more susceptible to erosion act to decouple neighboring cells and cause extensive and perennial network and channel adjustments.

  8. A model of hydrogen impact induced chemical erosion of carbon based on elementary reaction steps

    International Nuclear Information System (INIS)

    Wittmann, M.; Kueppers, J.

    1996-01-01

    Based on the elementary reaction steps for chemical erosion of carbon by hydrogen a model is developed which allows to calculate the amount of carbon erosion at a hydrogenated carbon surface under the impact of hydrogen ions and neutrals. Hydrogen ion and neutral flux energy distributions prevailing at target plates in the ASDEX upgrade experiment are chosen in the present calculation. The range of hydrogen particles in the target plates is calculated using TRIDYN code. Based upon the TRIDYN results the extent of the erosion reaction as a function of depth is estimated. The results show that both, target temperature and impinging particle flux energy distribution, determine the hydrogen flux density dependent erosion yield and the location of the erosion below the surface. (orig.)

  9. Development of Erosive Burning Models for CFD Predictions of Solid Rocket Motor Internal Environments

    Science.gov (United States)

    Wang, Qun-Zhen

    2003-01-01

    Four erosive burning models, equations (11) to (14). are developed in this work by using a power law relationship to correlate (1) the erosive burning ratio and the local velocity gradient at propellant surfaces; (2) the erosive burning ratio and the velocity gradient divided by centerline velocity; (3) the erosive burning difference and the local velocity gradient at propellant surfaces; and (4) the erosive burning difference and the velocity gradient divided by centerline velocity. These models depend on the local velocity gradient at the propellant surface (or the velocity gradient divided by centerline velocity) only and, unlike other empirical models, are independent of the motor size. It was argued that, since the erosive burning is a local phenomenon occurring near the surface of the solid propellant, the erosive burning ratio should be independent of the bore diameter if it is correlated with some local flow parameters such as the velocity gradient at the propellant surface. This seems to be true considering the good results obtained by applying these models, which are developed from the small size 5 inch CP tandem motor testing, to CFD simulations of much bigger motors.

  10. A GIS-model for predicting the impact of climate change on shore erosion in hydroelectric reservoirs

    International Nuclear Information System (INIS)

    Penner, L.A.; Zimmer, T.A.M.; St Laurent, M.

    2008-01-01

    Shoreline erosion affects inland lakes and hydroelectric reservoirs in several ways. This poster described a vector-based geographic information system (GIS) model designed to predict changes in shore zone geometry, top-of-bluff recession, and eroded sediment volumes. The model was designed for use in Manitoba Hydro's reservoirs in northern Manitoba, and simulated near-shore downcutting and bank recession caused by wind-generated waves. Parameters for the model included deep water wave energy, and water level fluctuations. Effective wave energy was seen as a function of the water level fluctuation range, wave conditions, and near-shore slope. The model was validated by field monitoring studies that included repeated shore zone transect surveys and sediment coring studies. Results of the study showed that the model provides a systematic method of predicting potential changes in erosion associated with climatic change. The volume and mass of eroded sediment predicted for the different modelling scenarios will be used as input data for future sedimentation models. tabs., figs

  11. A One-Dimensional Global-Scaling Erosive Burning Model Informed by Blowing Wall Turbulence

    Science.gov (United States)

    Kibbey, Timothy P.

    2014-01-01

    A derivation of turbulent flow parameters, combined with data from erosive burning test motors and blowing wall tests results in erosive burning model candidates useful in one-dimensional internal ballistics analysis capable of scaling across wide ranges of motor size. The real-time burn rate data comes from three test campaigns of subscale segmented solid rocket motors tested at two facilities. The flow theory admits the important effect of the blowing wall on the turbulent friction coefficient by using blowing wall data to determine the blowing wall friction coefficient. The erosive burning behavior of full-scale motors is now predicted more closely than with other recent models.

  12. An improved market penetration model for wind energy technology forecasting

    Energy Technology Data Exchange (ETDEWEB)

    Lund, P.D. [Helsinki Univ. of Technology, Espoo (Finland). Advanced Energy Systems

    1995-12-31

    An improved market penetration model with application to wind energy forecasting is presented. In the model, a technology diffusion model and manufacturing learning curve are combined. Based on a 85% progress ratio that was found for European wind manufactures and on wind market statistics, an additional wind power capacity of ca 4 GW is needed in Europe to reach a 30 % price reduction. A full breakthrough to low-cost utility bulk power markets could be achieved at a 24 GW level. (author)

  13. An improved market penetration model for wind energy technology forecasting

    International Nuclear Information System (INIS)

    Lund, P.D.

    1995-01-01

    An improved market penetration model with application to wind energy forecasting is presented. In the model, a technology diffusion model and manufacturing learning curve are combined. Based on a 85% progress ratio that was found for European wind manufactures and on wind market statistics, an additional wind power capacity of ca 4 GW is needed in Europe to reach a 30 % price reduction. A full breakthrough to low-cost utility bulk power markets could be achieved at a 24 GW level. (author)

  14. The Future Role of Information Technology in Erosion Modelling

    Science.gov (United States)

    Natural resources management and decision-making is a complex process requiring cooperation and communication among federal, state, and local stakeholders balancing biophysical and socio-economic concerns. Predicting soil erosion is common practice in natural resource management for assessing the e...

  15. Wind atlas for Egypt: Measurements, micro- and mesoscale modelling

    DEFF Research Database (Denmark)

    Mortensen, N.G.; Hansen, J.C.; Badger, J.

    2006-01-01

    with SRTM 3 elevation data and satellite imagery, provide the means for immediate WAsP wind resource assessments anywhere in Egypt. In addition to the very high wind resource in the Gulfs of Suez and Aqaba, the wind atlas has discovered a large region in the Western Desert with a fairly high resource......The results of a comprehensive, 8-year wind resource assessment programme in Egypt are presented. The objective has been to provide reliable and accurate wind atlas data sets for evaluating the potential wind power output from large electricity-producing wind turbine installations. The regional...... wind climates of Egypt have been determined by two independent methods: a traditional wind atlas based on observations from more than 30 stations all over Egypt, and a numerical wind atlas based on long-term reanalysis data and a mesoscale model (KAMM). The mean absolute error comparing the two methods...

  16. Regional soil erosion assessment in Slovakia using modelling and farmer's participation

    DEFF Research Database (Denmark)

    Kenderessy, Pavol; Veihe, Anita

    There has been an increasing interest by decision makers to obtain regional assessments of soil erosion risk, whereas many existing models require substantial amounts of high quality input data with high spatial resolution and they are often only validated at the plot level. Operational models...... for regional assessments should be based on simple data requirements, must consider spatial and temporal variability in hydrological and soil erosion processes, and must be applicable to a variety of regions with a minimum of calibration. This study aims to assess the applicability of the Erosion3D model...... with cereals, sunflowers and corn and is characterised by poor cultivation practices and use of fertilizers leading to land degradation. As a first step, the initial raster-based modelling of soil loss and deposition has provided acceptable and realistic values. The predicted spatial patterns of erosion...

  17. Simulation analysis of a wind farm with different aggregated models

    DEFF Research Database (Denmark)

    Li, H.; Wang, H.; Zhao, B.

    2011-01-01

    Based on a wind farm including wind turbines with squirrel cage induction generators (SCIGs), different aggregated models of a wind farm, such as a single weighted average model, a reduced-order re-scaled model, a parameter transformed model and a single weighted arithmetic model were presented, ...... by using Matlab/Simulink, based on the conditions of the wind speed disturbance and three-phase short-circuit fault at the point of connected grid. The results have shown that the presented wind farm models are correct and valid.......Based on a wind farm including wind turbines with squirrel cage induction generators (SCIGs), different aggregated models of a wind farm, such as a single weighted average model, a reduced-order re-scaled model, a parameter transformed model and a single weighted arithmetic model were presented......, as well as the detailed SCIG wind turbine model. Regarding for the two cases of a wind farm including SCIGs with identical parameters and different parameters, the dynamic characteristics and transient performances of the presented wind farm using different aggregated models were studied and compared...

  18. Surface Modelling of Nanostructured Copper Subjected to Erosion-Corrosion

    Directory of Open Access Journals (Sweden)

    Osama M. Irfan

    2017-04-01

    Full Text Available The last decade has witnessed considerable advancements in nanostructured material synthesis and property characterization. However, there still exists some deficiency in the mechanical and surface property characterization of these materials. In this paper, the erosion corrosion (E-C behavior of nanostructured copper was studied. The nanostructured copper was produced through severe plastic deformation (SPD by applying four passes of equal channel angular pressing (ECAP. The combined effects of the testing time, impact velocity, and concentration of erosive solid particles (i.e., sand concentration on the E-C behavior of nanostructured copper were then examined. Based on a defined domain for the testing time, impact velocity, and sand concentration, E-C tests were performed for numerous combinations of test points via the slurry pot method. The test points were selected using the face-centered center composite design of experiments to enable visualization of the test results through surface plots. The extent of E-C on the test specimens was determined by measuring the mass loss. Polynomial regression and Kriging were used to fit surfaces to the experimental data, which were subsequently used to generate surface plots. The results showed that the E-C of nanostructured copper is best described by a quadratic function of testing time, velocity, and erosive solid particle concentration. The results also revealed that E-C increases with an increasing testing time, impact velocity, and erosive solid particle concentration. In addition, it was observed that the effect of the erosive solid particles on E-C is further intensified by an increased impact velocity.

  19. Forecasting wind power production from a wind farm using the RAMS model

    DEFF Research Database (Denmark)

    Tiriolo, L.; Torcasio, R. C.; Montesanti, S.

    2015-01-01

    The importance of wind power forecast is commonly recognized because it represents a useful tool for grid integration and facilitates the energy trading. This work considers an example of power forecast for a wind farm in the Apennines in Central Italy. The orography around the site is complex...... and the horizontal resolution of the wind forecast has an important role. To explore this point we compared the performance of two 48 h wind power forecasts using the winds predicted by the Regional Atmospheric Modeling System (RAMS) for the year 2011. The two forecasts differ only for the horizontal resolution...... of the ECMWF Integrated Forecasting System (IFS), whose horizontal resolution over Central Italy is about 25 km at the time considered in this paper. Because wind observations were not available for the site, the power curve for the whole wind farm was derived from the ECMWF wind operational analyses available...

  20. Modelling soil carbon movement by erosion over large scales and long time periods

    Science.gov (United States)

    Quinton, John; Davies, Jessica; Tipping, Ed

    2014-05-01

    Agricultural intensification accelerates physical erosion rates and the transport of carbon within the landscape. In order to improve understanding of how past, present and future anthropogenic land-use change has and will influence carbon and nutrient cycling, it is necessary to develop quantitative tools that can predict soil erosion and carbon movement at large temporal and spatial scales, that are consistent with the time constants of biogeochemical processes and the spatial scales of land-use change and natural resources. However, representing erosion and its impact on the carbon cycle over large spatial scales and long time periods is challenging. Erosion and sediment transport processes operate at multiple spatial and temporal scales with splash erosion dominating at the sub-plot scale and occurring within seconds, up to gully formation operating at field-catchment scales over days to months. In addition, most erosion production observations are made at the experimental plot scale, where fine time scales and detailed processes dominate. This is coupled with complexities associated with carbon detachment, decomposition and uncertainties surrounding carbon burial rates and stability - all of which occur over widely different temporal and spatial scales. As such, these data cannot be simply scaled to inform erosion and carbon representation at the regional scale, where topography, vegetation cover and landscape organisation become more important controls on sediment fluxes. We have developed a simple energy-based regional scale method of soil erosion modelling, which is integration into a hydro-biogeochemical model that will simulate carbon, nitrogen and phosphorus pools and fluxes across the UK from the industrial revolution to the present day. The model is driven by overland flow, dynamic vegetation cover, soil properties, and topographic distributions and produces sediment production and yield at the 5km grid scale. In this paper we will introduce the

  1. Erosion and Sediment Transport Modelling in Shallow Waters: A Review on Approaches, Models and Applications.

    Science.gov (United States)

    Hajigholizadeh, Mohammad; Melesse, Assefa M; Fuentes, Hector R

    2018-03-14

    The erosion and sediment transport processes in shallow waters, which are discussed in this paper, begin when water droplets hit the soil surface. The transport mechanism caused by the consequent rainfall-runoff process determines the amount of generated sediment that can be transferred downslope. Many significant studies and models are performed to investigate these processes, which differ in terms of their effecting factors, approaches, inputs and outputs, model structure and the manner that these processes represent. This paper attempts to review the related literature concerning sediment transport modelling in shallow waters. A classification based on the representational processes of the soil erosion and sediment transport models (empirical, conceptual, physical and hybrid) is adopted, and the commonly-used models and their characteristics are listed. This review is expected to be of interest to researchers and soil and water conservation managers who are working on erosion and sediment transport phenomena in shallow waters. The paper format should be helpful for practitioners to identify and generally characterize the types of available models, their strengths and their basic scope of applicability.

  2. Erosion and Sediment Transport Modelling in Shallow Waters: A Review on Approaches, Models and Applications

    Science.gov (United States)

    Fuentes, Hector R.

    2018-01-01

    The erosion and sediment transport processes in shallow waters, which are discussed in this paper, begin when water droplets hit the soil surface. The transport mechanism caused by the consequent rainfall-runoff process determines the amount of generated sediment that can be transferred downslope. Many significant studies and models are performed to investigate these processes, which differ in terms of their effecting factors, approaches, inputs and outputs, model structure and the manner that these processes represent. This paper attempts to review the related literature concerning sediment transport modelling in shallow waters. A classification based on the representational processes of the soil erosion and sediment transport models (empirical, conceptual, physical and hybrid) is adopted, and the commonly-used models and their characteristics are listed. This review is expected to be of interest to researchers and soil and water conservation managers who are working on erosion and sediment transport phenomena in shallow waters. The paper format should be helpful for practitioners to identify and generally characterize the types of available models, their strengths and their basic scope of applicability. PMID:29538335

  3. Wind climate modeling using Weibull and extreme value distribution ...

    African Journals Online (AJOL)

    The expected number of stress cycles in the projected working life of a structure is related to the expected number of hours in the critical wind speed range and wind climate modelling is required to know this. The most popular model for this purpose is Weibull distribution. Again, wind energy is proportional to the cube of the ...

  4. Identifying the Areas Benefitting from the Prevention of Wind Erosion by the Key Ecological Function Area for the Protection of Desertification in Hunshandake, China

    Directory of Open Access Journals (Sweden)

    Yu Xiao

    2017-10-01

    Full Text Available Research on the spatial flow of ecosystem services can help to identify the spatial relationships between service-providing areas (SPAs and service-benefitting areas (SBAs. In this study, we used the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT model to stimulate the flow paths of the wind erosion prevented by ecosystems in Hunshandake, China. By interpolating these paths, the SBAs were identified, and their benefits in terms of land cover, population, and Gross Domestic Product (GDP were determined. The results indicated that the flow paths mostly extended to the eastern part of the study area, and the estimated cover of the SBAs was 39.21% of the total area of China. The grid cells through which many (≥10% of the trajectories passed were mainly located in the western part of north-eastern China and the eastern part of northern China. The benefitting population accounted for 74.51% of the total population of China, and the GDP was 67.11% of the total in 2010. Based on this research, we described a quantitative relationship between the SPAs and the SBAs and identified the actual beneficiaries. This work may provide scientific knowledge that can be used by decision makers to develop management strategies, such as ecological compensation to mitigate damage from sandstorms in the study area.

  5. Adapting the RUSLE and GIS to model soil erosion risk in a mountains karst watershed, Guizhou Province, China.

    Science.gov (United States)

    Yue-Qing, Xu; Xiao-Mei, Shao; Xiang-Bin, Kong; Jian, Peng; Yun-Long, Cai

    2008-06-01

    Soil erosion is a serious environmental problem in Guizhou Province, which is located in the centre of the karst areas of southwestern China. Unfortunately, Guizhou Province suffers from a lack of financial resources to research, monitor and model soil erosion at large watershed. In order to assess the soil erosion risk, soil erosion modeling at the watershed scale are urgently needed to be undertaken. This study integrated the Revised Universal Soil Loss Equation (RUSLE) with a Geographic Information System (GIS) to estimate soil loss and identify the risk erosion areas in the Maotiao River watershed, which is a typical rural watershed in Guizhou Province. All factors used in the RUSLE were calculated for the watershed using local data. It was classified into five categories ranging from minimal risk to extreme erosion risk depending on the calculated soil erosion amount. The soil erosion map was linked to land use, elevation and slope maps to explore the relationship between soil erosion and environmental factors and identify the areas of soil erosion risk. The results can be used to advice the local government in prioritizing the areas of immediate erosion mitigation. The integrated approach allows for relatively easy, fast, and cost-effective estimation of spatially distributed soil erosion. It thus indicates that RUSLE-GIS model is a useful and efficient tool for evaluating and mapping soil erosion risk at a large watershed scale in Guizhou Province.

  6. Electric solar wind sail mass budget model

    Directory of Open Access Journals (Sweden)

    P. Janhunen

    2013-02-01

    Full Text Available The electric solar wind sail (E-sail is a new type of propellantless propulsion system for Solar System transportation, which uses the natural solar wind to produce spacecraft propulsion. The E-sail consists of thin centrifugally stretched tethers that are kept charged by an onboard electron gun and, as such, experience Coulomb drag through the high-speed solar wind plasma stream. This paper discusses a mass breakdown and a performance model for an E-sail spacecraft that hosts a mission-specific payload of prescribed mass. In particular, the model is able to estimate the total spacecraft mass and its propulsive acceleration as a function of various design parameters such as the number of tethers and their length. A number of subsystem masses are calculated assuming existing or near-term E-sail technology. In light of the obtained performance estimates, an E-sail represents a promising propulsion system for a variety of transportation needs in the Solar System.

  7. Evaluation of Karst Soil Erosion and Nutrient Loss Based on RUSLE Model in Guizhou Province

    Science.gov (United States)

    Zeng, Cheng; Li, Yangbing; Bai, Xiaoyong; Luo, Guangjie

    2018-01-01

    Based on GIS technology and RUSLE model, the spatial variation characteristics of soil erosion were analyzed in karst areas, and the relationship between soil erosion and soil nutrient loss was discussed. The results showed that the soil differences in spatial variation between nutrient losses. The results illustrate the total soil erosion in is 10316.31 × 104t • a-1, accounting for 84.95% of the total land area in Guizhou Province. The spatial distribution of soil erosion showing the characteristics of the southeast to the northwest strip. The annual average soil erosion modulu is 691.94 t • km-2 • a-1, of which karst is 720.28t • km-2 • a-1 and non-karst is 689.53 t • km-2 • a-1. The total nutrient losses such as soil organic carbon (SOC), total nitrogen (TN), total phosphorus (TP) and total potassium (TK) were 596.72 × 104t • a-1 due to soil erosion, and SOC, TN and TP and TK were 38.13, 1.61, 0.41 and 14.70t • km-2 • a-1, respectively. The average amount of loss and total loss are the largest in non-karst, and four kinds of nutrient is the smallest in karst gorge. The spatial variation of soil erosion in the study area is the process of increasing the erosion area with the increase of the erosion rate, and the difference of the spatial distribution of soil erosion determines the spatial distribution of soil nutrient loss.

  8. The use of spatial empirical models to estimate soil erosion in arid ecosystems.

    Science.gov (United States)

    Abdullah, Meshal; Feagin, Rusty; Musawi, Layla

    2017-02-01

    The central objective of this project was to utilize geographical information systems and remote sensing to compare soil erosion models, including Modified Pacific South-west Inter Agency Committee (MPSIAC), Erosion Potential Method (EPM), and Revised Universal Soil Loss Equation (RUSLE), and to determine their applicability for arid regions such as Kuwait. The northern portion of Umm Nigga, containing both coastal and desert ecosystems, falls within the boundaries of the de-militarized zone (DMZ) adjacent to Iraq and has been fenced off to restrict public access since 1994. Results showed that the MPSIAC and EPM models were similar in spatial distribution of erosion, though the MPSIAC had a more realistic spatial distribution of erosion and presented finer level details. The RUSLE presented unrealistic results. We then predicted the amount of soil loss between coastal and desert areas and fenced and unfenced sites for each model. In the MPSIAC and EPM models, soil loss was different between fenced and unfenced sites at the desert areas, which was higher at the unfenced due to the low vegetation cover. The overall results implied that vegetation cover played an important role in reducing soil erosion and that fencing is much more important in the desert ecosystems to protect against human activities such as overgrazing. We conclude that the MPSIAC model is best for predicting soil erosion for arid regions such as Kuwait. We also recommend the integration of field-based experiments with lab-based spatial analysis and modeling in future research.

  9. Advancements in Hydrology and Erosion Process Understanding and Post-Fire Hydrologic and Erosion Model Development for Semi-Arid Landscapes

    Science.gov (United States)

    Williams, C. Jason; Pierson, Frederick B.; Al-Hamdan, Osama Z.; Robichaud, Peter R.; Nearing, Mark A.; Hernandez, Mariano; Weltz, Mark A.; Spaeth, Kenneth E.; Goodrich, David C.

    2017-04-01

    Fire activity continues to increase in semi-arid regions around the globe. Private and governmental land management entities are challenged with predicting and mitigating post-fire hydrologic and erosion responses on these landscapes. For more than a decade, a team of scientists with the US Department of Agriculture has collaborated on extensive post-fire hydrologic field research and the application of field research to development of post-fire hydrology and erosion predictive technologies. Experiments funded through this research investigated the impacts of fire on vegetation and soils and the effects of these fire-induced changes on infiltration, runoff generation, erodibility, and soil erosion processes. The distribution of study sites spans diverse topography across grassland, shrubland, and woodland landscapes throughout the western United States. Knowledge gleaned from the extensive field experiments was applied to develop and enhance physically-based models for hillslope- to watershed-scale runoff and erosion prediction. Our field research and subsequent data syntheses have identified key knowledge gaps and challenges regarding post-fire hydrology and erosion modeling. Our presentation details some consistent trends across a diverse domain and varying landscape conditions based on our extensive field campaigns. We demonstrate how field data have advanced our understanding of post-fire hydrology and erosion for semi-arid landscapes and highlight remaining key knowledge gaps. Lastly, we briefly show how our well-replicated experimental methodologies have contributed to advancements in hydrologic and erosion model development for the post-fire environment.

  10. Coastal erosion vulnerability estimations by coupling field data and hydrodynamic modeling

    Science.gov (United States)

    Finikianaki, Vasilia; Alexandrakis, George; Poulos, Serafim; Ghionis, George; Kampanis, Nikolaos

    2017-04-01

    Wind generated waves are a dominant factor of coastal zone evolution as they induce nearshore sediment movement. Significant sediment transport and the associated morphological changes of the coastal zone are related, mainly, to storm events. In this study, the effects of a severe storm event, associated with the Etesian winds, that took place from the 24th to 30th of July at Gouves beach (north coast of Crete) were monitored ([1], [2]) and subsequently simulated, with the use of the Delft3D model, in order to provide necessary data for estimating beach vulnerability. Beach vulnerability to erosion was estimated by the BVI method ([3]), which has the ability to refer to smaller sectors of an individual beach. The interaction between waves and currents, which is required for the computation of the BVI, was obtained by the coupling of two models included in Delft3D: the Delft3D - FLOW, for the hydrodynamic computations and the sediment transport processes; and the Delft3D - WAVE, for the computation of the wave field. Boundary conditions were derived from the field data, assuming a JONSWAP spectrum. Additionally, 3 observation points were used for the monitoring of the computed quantities as a function of time. Their positions coincide with those of the three Valeport Autonomous Benthic Recorders, which were deployed at water depths of 2.60m, 3.95m and 5.62m during the field measurements. The outputs of the simulation fit well with the measured data, leading to accurate forecasted results regarding the morphodynamic conditions of the study area. Bottom changes occur mainly during the first peak of the event. The model slightly overestimates the significant wave height, the current velocity in the nearshore area and the suspended sediment concentration near the bed at the observation points. Furthermore, the model predicts a shoreward increase of sediment concentration at the observation points, with the value of accumulation at the second observation point being

  11. Wind resource modelling for micro-siting - Validation at a 60-MW wind farm site

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, J.C.; Gylling Mortensen, N. [Risoe National Lab., Wind Energy and Atmospheric Physics Dept., Roskilde (Denmark); Said, U.S. [New and Renewable Energy Authority, Cairo (Egypt)

    1999-03-01

    This paper investigates and validates the applicability of the WAsP-model for layout optimization and micro-siting of wind turbines at a given site for a 60-MW wind farm at Zafarana at the Gulf of Suez in Egypt. Previous investigations show large gradients in the wind climate within the area. For the design and optimization of the wind farm it was found necessary to verify the WAsP extrapolation of wind atlas results from 2 existing meteorological masts located 5 and 10 km, respectively, from the wind farm site. On-site measurements at the 3.5 x 3.5 km{sup 2} wind farm site in combination with 7 years of near-site wind atlas measurements offer significant amounts of data for verification of wind conditions for micro-siting. Wind speeds, wind directions, turbulence intensities and guests in 47.5 m a.g.l. have been measured at 9 locations across the site. Additionally, one of the site masts is equipped as a reference mast, measuring both vertical profiles of wind speed and temperature as well as air pressure and temperature. The exercise is further facilitated by the fact that winds are highly uni-directional; the north direction accounting for 80-90% of the wind resource. The paper presents comparisons of 5 months of on-site measurements and modeled predictions from 2 existing meteorological masts located at distances of 5 and 10 km, respectively, from the wind farm site. Predictions based on terrain descriptions of the Wind Atlas for the Gulf of Suez 1991-95 showed over-predictions of wind speeds of 4-10%. With calibrated terrain descriptions, made based on measured data and a re-visit to critical parts of the terrain, the average prediction error of wind speeds was reduced to about 1%. These deviations are smaller than generally expected for such wind resource modeling, clearly documenting the validity of using WAsP modeling for micro-siting and layout optimization of the wind farm. (au)

  12. Net-erosion profile model and simulation experiments

    International Nuclear Information System (INIS)

    Sagara, Akio

    2001-01-01

    Estimation of net-erosion profile is requisite for evaluating the lifetime of divertor plates under high heat and particle fluxes of fusion plasmas. As a reference in benchmark tests of numerical calculation codes, a self-consistent analytical solution is presented for a simplified divertor condition, wherein the magnetic field line is normal to the target plate and the ionization mean free path of sputtered particles is assumed constant. The primary flux profile of hydrogen and impurities are externally given as well as the return ratio of sputtered atoms to the target. In the direction along the divertor trace, all conditions are uniform. The analytical solution is compared with net-erosion experiments carried out using the Compact Helical System (CHS). The deposition profiles of Ti and O impurities are in very good agreement with the analytical predictions. Recent preliminary results observed on divertor plates in the Large Helical Device (LHD) are briefly presented. (author)

  13. Development and Verification of CFD Models for Modeling Wind Conditions on Forested Wind Turbine Sites

    DEFF Research Database (Denmark)

    Andersen, Morten Q.; Mortensen, Kasper; Nielsen, Daniel E.

    2009-01-01

    This paper describes a proposed CFD model to simulate the wind conditions on a forested site. The model introduces porous subdomains representing the forests in the terrain. Obtained simulation values are compared to field measurements in- and outside a forest. Initial results are very promising...

  14. Soil erosion modelling: from European to Global scale

    OpenAIRE

    PANAGOS PANAGIOTIS; ROBINSON DAVID; LUGATO EMANUELE; BALLABIO CRISTIANO; BORRELLI PASQUALE; MONTANARELLA LUCA

    2018-01-01

    Nowadays, soil erosion is known as one of the most critical forms of soil degradation and a major threat to agricultural soil productivity and this may create societal problems in many regions of the world. More than 99% of the world's food supply comes ultimately from land-based production depending on soils and this should be considered carefully taking into account the population increase to 9 billion by 2050. Given the expected increase of extreme storm events and the agriculture intensi...

  15. Modelling approach for the rainfall erosivity index in sub-humid urban areas in northern Algeria

    Directory of Open Access Journals (Sweden)

    I. Touaibia

    2014-09-01

    Full Text Available This work presents an approach for storm water erosivity index modelling in the absence of measurement in an urban area, in a sub-humid climate. In torrential storms, floods, loaded with sediments, obstruct storm water drainage. With the aim of estimating the amount of sediment that can be deposited on a stretch of road, adjacent to the study area, the erosivity index is determined from a count of 744 rain showers recorded over a period of 19 years. The Universal Soil Loss Equation (USLE of Wischmeier and Smith is applied, where only the index of erosivity is calculated; it is based on the intensity of the rain starting the process of erosion in the basin. Functional relations are required between this factor and the explanatory variables. A power type regression model is reached, making it possible to bring a decision-making aid in absences of measurements.

  16. Distributed Modeling of soil erosion and deposition affected by buffer strips

    DEFF Research Database (Denmark)

    Khademalrasoul, Ataalah; Heckrath, Goswin Johann; Iversen, Bo Vangsø

    bodies. Buffer zones can be efficient in terms of retaining sediment and phosphorus transported by water erosion. This study aimed at parameterizing a spatial distributed erosion model to evaluate the effect of different buffer zone properties and dimension. It was our hypothesis that the placement...... and dimension of buffer zones in the landscape can be optimized by means of spatially distributed erosion and deposition modeling. During the period from 1998 to 2000 field campaigns were done on a range of agricultural land in Denmark. On 21 slope units and adjacent buffer zones, rill erosion and deposition...... was surveyed during the runoff season. In addition, organic carbon and phosphorous contents as well as bulk density were determined in soils of eroding and depositional sites. General buffer zone properties were recorded. Here we present results from scenario analyses comparing measured sediment deposition...

  17. Simulation model of an active stall wind turbine controller

    Energy Technology Data Exchange (ETDEWEB)

    Jauch, C.; Hansen, A.D.; Soerensen, P. [Risoe National Lab., Wind Energy Dept., Rosilde (Denmark); Blaabjerg, F. [Aalborg Univ., Inst. of Energy Technology (Denmark)

    2004-07-01

    This paper describes an active stall wind turbine controller. The objective is to develop a general model of an active stall controller in order to simulate the operation of grid connected active stall wind turbines. The active stall turbine concept and its control strategies are presented and evaluated on the basis of simulations. The presented controller is described for continuous operation under all wind speeds from start-up wind speed to shut doven wind speed. Due to its parametric implementation it is general i.e. it can represent different active stall wind turbine controllers and can be implemented in different simulation tools. (au)

  18. Prescribed wind shear modelling with the actuator line technique

    DEFF Research Database (Denmark)

    Mikkelsen, Robert Flemming; Sørensen, Jens Nørkær; Troldborg, Niels

    2007-01-01

    A method for prescribing arbitrary steady atmospheric wind shear profiles combined with CFD is presented. The method is furthermore combined with the actuator line technique governing the aerodynamic loads on a wind turbine. Computation are carried out on a wind turbine exposed to a representative...... steady atmospheric wind shear profile with and without wind direction changes up through the atmospheric boundary layer. Results show that the main impact on the turbine is captured by the model. Analysis of the wake behind the wind turbine, reveal the formation of a skewed wake geometry interacting...

  19. Risk assessment of pesticide transport with water erosion: A conceptual model

    Science.gov (United States)

    Yang, Xiaomei; Van Der Zee, Sjoerd E. A. T. M.; Gai, Lingtong; Wesseling, Jan G.; Ritsema, Coen J.; Geissen, Violette

    2017-04-01

    Pesticides are widely used in agriculture, horticulture, and forestry, and pesticide pollution has become an important issue worldwide. Entraining in runoff and being attached to eroded soil particles, posing a risk to water and soil quality and human health. In order to assess the risk of pesticide during water erosion processes, a simple integrative model of pesticide transport by runoff and erosion was developed. Taking soil hydrological and pesticide behaviour into account, such as water infiltration, erosion, runoff, and pesticide transport and degradation in soil, the conceptual framework was based on the known assumptions such as the convection-dispersion equation and lognormal distributions of soil properties associated with transport, sorption, degradation, and erosion. A sensitivity analysis was conducted and the results indicated that the total amount of pesticide related to soil eroded by water washing increased with slope gradient, rainfall intensity, and water field capacity of the soil. The mass of transported pesticide decreased as the micro-topography of the soil surface became obviously and the time from pesticide sprayed to erosion occurring associated with pesticide degradation negatively influenced the total amount of transported pesticide. The mechanisms involved in pesticide transport, such as runoff, infiltration, soil erosion, and pesticide transport and decay in the topsoil, thus can be well accounted for pesticide risk assessment especially in the region with intensive pesticide use and soil water erosion events.

  20. Wind Plant Models in IEC 61400-27-2 and WECC - latest developments in international standards on wind turbine and wind plant modeling

    DEFF Research Database (Denmark)

    Fortmann, Jens; Miller, Nicholas; Kazachkov, Yuri

    This paper describes the latest developments in the standardization of wind plant and wind plant controller models. As a first step IEC TC88 WG 27 and WECC jointly developed generic wind turbine models which have been published by WECC in 2014 and IEC in 2015 as IEC 61400-27-1, which also include...

  1. Modelling river bank erosion processes and mass failure mechanisms using 2-D depth averaged numerical model

    Science.gov (United States)

    Die Moran, Andres; El kadi Abderrezzak, Kamal; Tassi, Pablo; Herouvet, Jean-Michel

    2014-05-01

    Bank erosion is a key process that may cause a large number of economic and environmental problems (e.g. land loss, damage to structures and aquatic habitat). Stream bank erosion (toe erosion and mass failure) represents an important form of channel morphology changes and a significant source of sediment. With the advances made in computational techniques, two-dimensional (2-D) numerical models have become valuable tools for investigating flow and sediment transport in open channels at large temporal and spatial scales. However, the implementation of mass failure process in 2D numerical models is still a challenging task. In this paper, a simple, innovative algorithm is implemented in the Telemac-Mascaret modeling platform to handle bank failure: failure occurs whether the actual slope of one given bed element is higher than the internal friction angle. The unstable bed elements are rotated around an appropriate axis, ensuring mass conservation. Mass failure of a bank due to slope instability is applied at the end of each sediment transport evolution iteration, once the bed evolution due to bed load (and/or suspended load) has been computed, but before the global sediment mass balance is verified. This bank failure algorithm is successfully tested using two laboratory experimental cases. Then, bank failure in a 1:40 scale physical model of the Rhine River composed of non-uniform material is simulated. The main features of the bank erosion and failure are correctly reproduced in the numerical simulations, namely the mass wasting at the bank toe, followed by failure at the bank head, and subsequent transport of the mobilised material in an aggradation front. Volumes of eroded material obtained are of the same order of magnitude as the volumes measured during the laboratory tests.

  2. Modeling of wind turbines for power system studies

    Energy Technology Data Exchange (ETDEWEB)

    Petru, T.

    2001-05-01

    When wind turbines are installed into the electric grid, the power quality is affected. Today, strict installation recommendations often prevail due to a lack of knowledge on this subject. Consequently, it is important to predict the impact of wind turbines on the electric grid before the turbines are installed. The thesis describes relevant power quality issues, discusses different configurations of wind turbines with respect to power quality and draw requirements regarding wind turbine modeling. A model of a stall-regulated, fixed-speed wind turbine system is introduced and its power quality impact on the electric grid is evaluated. The model is verified with field measurements.

  3. Effects of Long-term Conservation Tillage on Soil Nutrients in Sloping Fields in Regions Characterized by Water and Wind Erosion

    Science.gov (United States)

    Tan, Chunjian; Cao, Xue; Yuan, Shuai; Wang, Weiyu; Feng, Yongzhong; Qiao, Bo

    2015-12-01

    Conservation tillage is commonly used in regions affected by water and wind erosion. To understand the effects of conservation tillage on soil nutrients and yield, a long-term experiment was set up in a region affected by water and wind erosion on the Loess Plateau. The treatments used were traditional tillage (CK), no tillage (NT), straw mulching (SM), plastic-film mulching (PM), ridging and plastic-film mulching (RPM) and intercropping (In). Our results demonstrate that the available nutrients in soils subjected to non-traditional tillage treatments decreased during the first several years and then remained stable over the last several years of the experiment. The soil organic matter and total nitrogen content increased gradually over 6 years in all treatments except CK. The nutrient content of soils subjected to conservative tillage methods, such as NT and SM, were significantly higher than those in soils under the CK treatment. Straw mulching and film mulching effectively reduced an observed decrease in soybean yield. Over the final 6 years of the experiment, soybean yields followed the trend RPM > PM > SM > NT > CK > In. This trend has implications for controlling soil erosion and preventing non-point source pollution in sloping fields by sacrificing some food production.

  4. Effects of Long-term Conservation Tillage on Soil Nutrients in Sloping Fields in Regions Characterized by Water and Wind Erosion.

    Science.gov (United States)

    Tan, Chunjian; Cao, Xue; Yuan, Shuai; Wang, Weiyu; Feng, Yongzhong; Qiao, Bo

    2015-12-01

    Conservation tillage is commonly used in regions affected by water and wind erosion. To understand the effects of conservation tillage on soil nutrients and yield, a long-term experiment was set up in a region affected by water and wind erosion on the Loess Plateau. The treatments used were traditional tillage (CK), no tillage (NT), straw mulching (SM), plastic-film mulching (PM), ridging and plastic-film mulching (RPM) and intercropping (In). Our results demonstrate that the available nutrients in soils subjected to non-traditional tillage treatments decreased during the first several years and then remained stable over the last several years of the experiment. The soil organic matter and total nitrogen content increased gradually over 6 years in all treatments except CK. The nutrient content of soils subjected to conservative tillage methods, such as NT and SM, were significantly higher than those in soils under the CK treatment. Straw mulching and film mulching effectively reduced an observed decrease in soybean yield. Over the final 6 years of the experiment, soybean yields followed the trend RPM > PM > SM > NT > CK > In. This trend has implications for controlling soil erosion and preventing non-point source pollution in sloping fields by sacrificing some food production.

  5. Uncovering wind turbine properties through two-dimensional stochastic modeling of wind dynamics.

    Science.gov (United States)

    Raischel, Frank; Scholz, Teresa; Lopes, Vitor V; Lind, Pedro G

    2013-10-01

    Using a method for stochastic data analysis borrowed from statistical physics, we analyze synthetic data from a Markov chain model that reproduces measurements of wind speed and power production in a wind park in Portugal. We show that our analysis retrieves indeed the power performance curve, which yields the relationship between wind speed and power production, and we discuss how this procedure can be extended for extracting unknown functional relationships between pairs of physical variables in general. We also show how specific features, such as the rated speed of the wind turbine or the descriptive wind speed statistics, can be related to the equations describing the evolution of power production and wind speed at single wind turbines.

  6. A watershed scale spatially-distributed model for streambank erosion rate driven by channel curvature

    Science.gov (United States)

    McMillan, Mitchell; Hu, Zhiyong

    2017-10-01

    Streambank erosion is a major source of fluvial sediment, but few large-scale, spatially distributed models exist to quantify streambank erosion rates. We introduce a spatially distributed model for streambank erosion applicable to sinuous, single-thread channels. We argue that such a model can adequately characterize streambank erosion rates, measured at the outsides of bends over a 2-year time period, throughout a large region. The model is based on the widely-used excess-velocity equation and comprised three components: a physics-based hydrodynamic model, a large-scale 1-dimensional model of average monthly discharge, and an empirical bank erodibility parameterization. The hydrodynamic submodel requires inputs of channel centerline, slope, width, depth, friction factor, and a scour factor A; the large-scale watershed submodel utilizes watershed-averaged monthly outputs of the Noah-2.8 land surface model; bank erodibility is based on tree cover and bank height as proxies for root density. The model was calibrated with erosion rates measured in sand-bed streams throughout the northern Gulf of Mexico coastal plain. The calibrated model outperforms a purely empirical model, as well as a model based only on excess velocity, illustrating the utility of combining a physics-based hydrodynamic model with an empirical bank erodibility relationship. The model could be improved by incorporating spatial variability in channel roughness and the hydrodynamic scour factor, which are here assumed constant. A reach-scale application of the model is illustrated on ∼1 km of a medium-sized, mixed forest-pasture stream, where the model identifies streambank erosion hotspots on forested and non-forested bends.

  7. Earth aeolian wind streaks: Comparison to wind data from model and stations

    Science.gov (United States)

    Cohen-Zada, A. L.; Maman, S.; Blumberg, D. G.

    2017-05-01

    Wind streak is a collective term for a variety of aeolian features that display distinctive albedo surface patterns. Wind streaks have been used to map near-surface winds and to estimate atmospheric circulation patterns on Mars and Venus. However, because wind streaks have been studied mostly on Mars and Venus, much of the knowledge regarding the mechanism and time frame of their formation and their relationship to the atmospheric circulation cannot be verified. This study aims to validate previous studies' results by a comparison of real and modeled wind data with wind streak orientations as measured from remote-sensing images. Orientations of Earth wind streaks were statistically correlated to resultant drift direction (RDD) values calculated from reanalysis and wind data from 621 weather stations. The results showed good agreement between wind streak orientations and reanalysis RDD (r = 0.78). A moderate correlation was found between the wind streak orientations and the weather station data (r = 0.47); a similar trend was revealed on a regional scale when the analysis was performed by continent, with r ranging from 0.641 in North America to 0.922 in Antarctica. At sites where wind streak orientations did not correspond to the RDDs (i.e., a difference of 45°), seasonal and diurnal variations in the wind flow were found to be responsible for deviation from the global pattern. The study thus confirms that Earth wind streaks were formed by the present wind regime and they are indeed indicative of the long-term prevailing wind direction on global and regional scales.

  8. Wake models developed during the Wind Shadow Project

    DEFF Research Database (Denmark)

    Larsen, Søren Ejling; Ott, Søren; Pena Diaz, Alfredo

    The Wind Shadow project has developed and validated improved models for determining the wakes losses, and thereby the array efficiency of very large, closely packed wind farms. The rationale behind the project has been that the existing software has been covering these types of wind farms poorly...

  9. Modeling and Identification of Harmonic Instability Problems In Wind Farms

    DEFF Research Database (Denmark)

    Ebrahimzadeh, Esmaeil; Blaabjerg, Frede; Wang, Xiongfei

    2016-01-01

    to identify harmonic instability problems in wind farms, where many wind turbines, cables, transformers, capacitor banks, shunt reactors, etc, typically are located. This methodology introduces the wind farm as a Multi-Input Multi-Outpur (MIMO) control system, where the linearized models of fast inner control...

  10. Modelling soil erosion in a head catchment of Jemma Basin on the Ethiopian highlands

    Science.gov (United States)

    Cama, Mariaelena; Schillaci, Calogero; Kropáček, Jan; Hochschild, Volker; Maerker, Michael

    2017-04-01

    Soil erosion represents one of the most important global issues with serious effects on agriculture and water quality especially in developing countries such as Ethiopia where rapid population growth and climatic changes affect wide mountainous areas. The catchment of Andit-Tid is a head catchment of Jemma Basin draining to the Blue Nile (Central Ethiopia). It is located in an extremely variable topographical environment and it is exposed to high degradation dynamics especially in the lower part of the catchment. The increasing agricultural activity and grazing, lead to an intense use of the steep slopes which altered the soil structure. As a consequence, water erosion processes accelerated leading to the evolution of sheet erosion, gullies and badlands. This study is aimed at a geomorphological assessment of soil erosion susceptibility. First, a geomorphological map is generated using high resolution digital elevation model (DEM) derived from high resolution stereoscopic satellite data, multispectral imagery from Rapid Eye satellite system . The map was then validated by a detailed field survey. The final maps contains three inventories of landforms: i) sheet, ii) gully erosion and iii) badlands. The water erosion susceptibility is calculated with a Maximum Entropy approach. In particular, three different models are built using the three inventories as dependent variables and a set of spatial attributes describing the lithology, terrain, vegetation and land cover from remote sensing data and DEMs as independent variables. The single susceptibility maps for sheet, gully erosion as well as badlands showed good to excellent predictive performances. Moreover, we reveal and discuss the importance of different sets of variables among the three models. In order to explore the mutual overlap of the three susceptibility maps we generated a combined map as color composite whereas each color represents one component of water erosion. The latter map yield a useful information

  11. Erosion of wind turbine blade coatings - Design and analysis of jet-based laboratory equipment for performance evaluation

    DEFF Research Database (Denmark)

    Zhang, Shizhong; Dam-Johansen, Kim; Nørkjær, Sten

    2015-01-01

    of up to 22 coating samples that is based on water jet slugs. Our objective is to study the effect of the parameters involved in the rain erosion process and to correlate our experimental results with data obtained with the complex and expensive whirling arm rig, which has become the industry standard...... method of test for rain erosion. Our results showed that water slug velocity and impact frequency are the most influential parameters in the coating erosion rate. Coating defects, often present on the specimens tested, appeared to play an important role in the erosion mechanism. Two particular...... and the potential significance of the presence of a thin water film on the coated surfaces. Our results endorse the complex nature of the rain erosion phenomenon, which is the result of the simultaneous combination of complex mechanisms and as such, it is difficult to reproduce at the laboratory scale....

  12. Offshore Wind Energy Cost Modeling Installation and Decommissioning

    CERN Document Server

    Kaiser, Mark J

    2012-01-01

    Offshore wind energy is one of the most promising and fastest growing alternative energy sources in the world. Offshore Wind Energy Cost Modeling provides a methodological framework to assess installation and decommissioning costs, and using examples from the European experience, provides a broad review of existing processes and systems used in the offshore wind industry. Offshore Wind Energy Cost Modeling provides a step-by-step guide to modeling costs over four sections. These sections cover: ·Background and introductory material, ·Installation processes and vessel requirements, ·Installation cost estimation, and ·Decommissioning methods and cost estimation.  This self-contained and detailed treatment of the key principles in offshore wind development is supported throughout by visual aids and data tables. Offshore Wind Energy Cost Modeling is a key resource for anyone interested in the offshore wind industry, particularly those interested in the technical and economic aspects of installation and decom...

  13. Comparing satellite SAR and wind farm wake models

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Vincent, P.; Husson, R.

    2015-01-01

    . These extend several tens of kilometres downwind e.g. 70 km. Other SAR wind maps show near-field fine scale details of wake behind rows of turbines. The satellite SAR wind farm wake cases are modelled by different wind farm wake models including the PARK microscale model, the Weather Research and Forecasting...... (WRF) model in high resolution and WRF with coupled microscale parametrization....

  14. On wake modeling, wind-farm gradients, and AEP predictions at the Anholt wind farm

    Directory of Open Access Journals (Sweden)

    A. Peña

    2018-04-01

    Full Text Available We investigate wake effects at the Anholt offshore wind farm in Denmark, which is a farm experiencing strong horizontal wind-speed gradients because of its size and proximity to land. Mesoscale model simulations are used to study the horizontal wind-speed gradients over the wind farm. From analysis of the mesoscale simulations and supervisory control and data acquisition (SCADA, we show that for westerly flow in particular, there is a clear horizontal wind-speed gradient over the wind farm. We also use the mesoscale simulations to derive the undisturbed inflow conditions that are coupled with three commonly used wake models: two engineering approaches (the Park and G. C. Larsen models and a linearized Reynolds-averaged Navier–Stokes approach (Fuga. The effect of the horizontal wind-speed gradient on annual energy production estimates is not found to be critical compared to estimates from both the average undisturbed wind climate of all turbines' positions and the undisturbed wind climate of a position in the middle of the wind farm. However, annual energy production estimates can largely differ when using wind climates at positions that are strongly influenced by the horizontal wind-speed gradient. When looking at westerly flow wake cases, where the impact of the horizontal wind-speed gradient on the power of the undisturbed turbines is largest, the wake models agree with the SCADA fairly well; when looking at a southerly flow case, where the wake losses are highest, the wake models tend to underestimate the wake loss. With the mesoscale-wake model setup, we are also able to estimate the capacity factor of the wind farm rather well when compared to that derived from the SCADA. Finally, we estimate the uncertainty of the wake models by bootstrapping the SCADA. The models tend to underestimate the wake losses (the median relative model error is 8.75 % and the engineering wake models are as uncertain as Fuga. These results are specific for

  15. Modeling of soil erosion and sediment transport in the East River Basin in southern China

    Science.gov (United States)

    Wu, Yping; Chen, Ji

    2012-01-01

    Soil erosion is a major global environmental problem that has caused many issues involving land degradation, sedimentation of waterways, ecological degradation, and nonpoint source pollution. Therefore, it is significant to understand the processes of soil erosion and sediment transport along rivers, and this can help identify the erosion prone areas and find potential measures to alleviate the environmental effects. In this study, we investigated soil erosion and identified the most seriously eroded areas in the East River Basin in southern China using a physically-based model, Soil and Water Assessment Tool (SWAT). We also introduced a classical sediment transport method (Zhang) into SWAT and compared it with the built-in Bagnold method in simulating sediment transport process along the river. The derived spatial soil erosion map and land use based erosion levels can explicitly illustrate the identification and prioritization of the critical soil erosion areas in this basin. Our results also indicate that erosion is quite sensitive to soil properties and slope. Comparison of Bagnold and Zhang methods shows that the latter can give an overall better performance especially in tracking the peak and low sediment concentrations along the river. We also found that the East River is mainly characterized by sediment deposition in most of the segments and at most times of a year. Overall, the results presented in this paper can provide decision support for watershed managers about where the best management practices (conservation measures) can be implemented effectively and at low cost. The methods we used in this study can also be of interest in sediment modeling for other basins worldwide.

  16. Bedrock river erosion measurements and modelling along a river of the Frontal Himalaya

    Science.gov (United States)

    Lave, Jerome; Dubille, Matthieu

    2017-04-01

    River incision is a key process in mountains denudation and therefore in landscape evolution models. Despite its importance, most incision models for mountain rivers rely on simplified, or quite empirical relations, and generally only consider annual average values for water discharge and sediment flux. In contrast, very few studies consider mechanistic models at the timescale of a flood, and try to bridge the gap between experimental or theoretical approaches and long term river incision studies. In this contribution, we present observations made during 7 monsoon seasons on fluvial bedrock erosion along the Bakeya river across the Frontal Himalaya in Central Nepal. Along its lower gorge, this river incises alternation of indurated sandstone and less resistant claystone, at Holocene rates larger than 10mm/yr. More importantly, its upper drainage mostly drains through non-cohesive conglomerate which allows, in this specific setting, estimating the bedload characteristics and instantaneous fluxes, i.e. a pre-requisite to test mechanistic models of fluvial erosion. During the study period, we monitored and documented the channel bank erosion in order to understand the amplitude of the erosion processes, their occurrence in relation with hydrology, in order to test time-integrated models of erosion. Besides hydrologic monitoring, erosion measurements were threefold: (1) at the scale of the whole monsoon, plucking and block removal by repeated photo surveys of a 400m long channel reach, (2) detailed microtopographic surveys of channel bedrock elevation along a few sandstone bars to document their abrasion, (3) real time measurement of fluvial bedrock wear to document erosion timing using a new erosion sensor. Results indicate that: 1. Erosion is highly dependent on rock resistance, but on average block detachment and removal is a more efficient process than bedrock attrition, and operates at a rate that permit channel banks downcutting to keep pace with Holocene uplift

  17. Modeling of wind turbines with doubly fed generator system

    CERN Document Server

    Fortmann, Jens

    2014-01-01

    Jens Fortmann describes the deduction of models for the grid integration of variable speed wind turbines and the reactive power control design of wind plants. The modeling part is intended as background to understand the theory, capabilities and limitations of the generic doubly fed generator and full converter wind turbine models described in the IEC 61400-27-1 and as 2nd generation WECC models that are used as standard library models of wind turbines for grid simulation software. Focus of the reactive power control part is a deduction of the origin and theory behind the reactive current requ

  18. Complete wind farm electromagnetic transient modelling for grid integration studies

    International Nuclear Information System (INIS)

    Zubia, I.; Ostolaza, X.; Susperregui, A.; Tapia, G.

    2009-01-01

    This paper presents a modelling methodology to analyse the impact of wind farms in surrounding networks. Based on the transient modelling of the asynchronous generator, the multi-machine model of a wind farm composed of N generators is developed. The model incorporates step-up power transformers, distribution lines and surrounding loads up to their connection to the power network. This model allows the simulation of symmetric and asymmetric short-circuits located in the distribution network and the analysis of transient stability of wind farms. It can be also used to study the islanding operation of wind farms

  19. Model Predictive Control of Wind Turbines using Uncertain LIDAR Measurements

    DEFF Research Database (Denmark)

    Mirzaei, Mahmood; Soltani, Mohsen; Poulsen, Niels Kjølstad

    2013-01-01

    The problem of Model predictive control (MPC) of wind turbines using uncertain LIDAR (LIght Detection And Ranging) measurements is considered. A nonlinear dynamical model of the wind turbine is obtained. We linearize the obtained nonlinear model for different operating points, which are determined......, we simplify state prediction for the MPC. Consequently, the control problem of the nonlinear system is simplified into a quadratic programming. We consider uncertainty in the wind propagation time, which is the traveling time of wind from the LIDAR measurement point to the rotor. An algorithm based...... by the effective wind speed on the rotor disc. We take the wind speed as a scheduling variable. The wind speed is measurable ahead of the turbine using LIDARs, therefore, the scheduling variable is known for the entire prediction horizon. By taking the advantage of having future values of the scheduling variable...

  20. Frequency weighted model predictive control of wind turbine

    DEFF Research Database (Denmark)

    Klauco, Martin; Poulsen, Niels Kjølstad; Mirzaei, Mahmood

    2013-01-01

    This work is focused on applying frequency weighted model predictive control (FMPC) on three blade horizontal axis wind turbine (HAWT). A wind turbine is a very complex, non-linear system influenced by a stochastic wind speed variation. The reduced dynamics considered in this work...... are the rotational degree of freedom of the rotor and the tower for-aft movement. The MPC design is based on a receding horizon policy and a linearised model of the wind turbine. Due to the change of dynamics according to wind speed, several linearisation points must be considered and the control design adjusted...... accordingly. In practice is very hard to measure the effective wind speed, this quantity will be estimated using measurements from the turbine itself. For this purpose stationary predictive Kalman filter has been used. Stochastic simulations of the wind turbine behaviour with applied frequency weighted model...

  1. Dynamic wind turbine models in power system simulation tool

    DEFF Research Database (Denmark)

    Hansen, Anca D.; Iov, Florin; Sørensen, Poul

    This report presents a collection of models and control strategies developed and implemented in the power system simulation tool PowerFactory DIgSILENT for different wind turbine concepts. It is the second edition of Risø-R-1400(EN) and it gathers and describes a whole wind turbine model database...... speed doubly-fed induction generator wind turbine concept 3. Variable speed multi-pole permanent magnet synchronous generator wind turbine concept These wind turbine concept models can be used and even extended for the study of different aspects, e.g. the assessment of power quality, control strategies......, connection of the wind turbine at different types of grid and storage systems. Different control strategies have been developed and implemented for these wind turbine concepts, their performance in normal or fault operation being assessed and discussed by means of simulations. The described control...

  2. Global empirical wind model for the upper mesosphere/lower thermosphere. I. Prevailing wind

    Directory of Open Access Journals (Sweden)

    Y. I. Portnyagin

    Full Text Available An updated empirical climatic zonally averaged prevailing wind model for the upper mesosphere/lower thermosphere (70-110 km, extending from 80°N to 80°S is presented. The model is constructed from the fitting of monthly mean winds from meteor radar and MF radar measurements at more than 40 stations, well distributed over the globe. The height-latitude contour plots of monthly mean zonal and meridional winds for all months of the year, and of annual mean wind, amplitudes and phases of annual and semiannual harmonics of wind variations are analyzed to reveal the main features of the seasonal variation of the global wind structures in the Northern and Southern Hemispheres. Some results of comparison between the ground-based wind models and the space-based models are presented. It is shown that, with the exception of annual mean systematic bias between the zonal winds provided by the ground-based and space-based models, a good agreement between the models is observed. The possible origin of this bias is discussed.

    Key words: Meteorology and Atmospheric dynamics (general circulation; middle atmosphere dynamics; thermospheric dynamics

  3. Evaluating quantitative and qualitative models: An application for nationwide water erosion assessment in Ethiopia

    NARCIS (Netherlands)

    Sonneveld, B.G.J.S.; Keyzer, M.A.; Stroosnijder, L

    2011-01-01

    This paper tests the candidacy of one qualitative response model and two quantitative models for a nationwide water erosion hazard assessment in Ethiopia. After a descriptive comparison of model characteristics the study conducts a statistical comparison to evaluate the explanatory power of the

  4. Evaluating quantitative and qualitative models: an application for nationwide water erosion assessment in Ethiopia

    NARCIS (Netherlands)

    Sonneveld, B.G.J.S.; Keyzer, M.A.; Stroosnijder, L.

    2011-01-01

    This paper tests the candidacy of one qualitative response model and two quantitative models for a nationwide water erosion hazard assessment in Ethiopia. After a descriptive comparison of model characteristics the study conducts a statistical comparison to evaluate the explanatory power of the

  5. Validation of Erosion 3D in Lower Saxony - Comparison between modelled soil erosion events and results of a long term monitoring project

    Science.gov (United States)

    Bug, Jan; Mosimann, Thomas

    2013-04-01

    Since 2000 water erosion has been surveyed on 400 ha arable land in three different regions of Lower Saxony (Mosimann et al. 2009). The results of this long-term survey are used for the validation of the soil erosion models such as USLE and Erosion 3D. The validation of the physically-based model Erosion 3D (Schmidt & Werner 2000) is possible because the survey analyses the effects (soil loss, sediment yield, deposition on site) of single thunder storm events and also maps major factors of soil erosion (soil, crop, tillage). A 12.5 m Raster DEM was used to model the soil erosion events.Rainfalldata was acquired from climate stations. Soil and landuse parameters were derived from the "Parameterkatalog Sachsen"(Michael et al. 1996). During thirteen years of monitoring, high intensity storms fell less frequently than expected. High intensity rainfalls with a return period of five or ten years usually occurred during periods of maximum plant cover.Winter events were ruled out because dataon snow melt and rainfallwere not measured. The validation is therefore restricted to 80 events. The validation consists of three parts. The first part compares the spatial distribution of the mapped soil erosion with the model results. The second part calculates the difference in the amount of redistributed soil. The third part analyses off-site effects such as sediment yield and pollution of water bodies. The validation shows that the overall result of erosion 3D is quite good. Spatial hotspots of soil erosion and of off-site effects are predicted correctly in most cases. However, quantitative comparison is more problematic, because the mapping allows only the quantification of rillerosion and not of sheet erosion. So as a rule,the predicted soil loss is higher than the mapped. The prediction of rill development is also problematic. While the model is capable of predicting rills in thalwegs, the modelling of erosion in tractor tracks and headlands is more complicated. In order to

  6. Modelling river bank retreat by combining fluvial erosion, seepage and mass failure

    Science.gov (United States)

    Dapporto, S.; Rinaldi, M.

    2003-04-01

    Streambank erosion processes contribute significantly to the sediment yielded from a river system and represent an important issue in the contexts of soil degradation and river management. Bank retreat is controlled by a complex interaction of hydrologic, geotechnical, and hydraulic processes. The capability of modelling these different components allows for a full reconstruction and comprehension of the causes and rates of bank erosion. River bank retreat during a single flow event has been modelled by combining simulation of fluvial erosion, seepage, and mass failures. The study site, along the Sieve River (Central Italy), has been subject to extensive researches, including monitoring of pore water pressures for a period of 4 years. The simulation reconstructs fairly faithfully the observed changes, and is used to: a) test the potentiality and discuss advantages and limitations of such type of methodology for modelling bank retreat; c) quantify the contribution and mutual role of the different processes determining bank retreat. The hydrograph of the event is divided in a series of time steps. Modelling of the riverbank retreat includes for each step the following components: a) fluvial erosion and consequent changes in bank geometry; b) finite element seepage analysis; c) stability analysis by limit equilibrium method. Direct fluvial shear erosion is computed using empirically derived relationships expressing lateral erosion rate as a function of the excess of shear stress to the critical entrainment value for the different materials along the bank profile. Lateral erosion rate has been calibrated on the basis of the total bank retreat measured by digital terrestrial photogrammetry. Finite element seepage analysis is then conducted to reconstruct the saturated and unsaturated flow within the bank and the pore water pressure distribution for each time step. The safety factor for mass failures is then computed, using the pore water pressure distribution obtained

  7. Models for wind turbines - a collection

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, G.C.; Hansen, M.H. (eds.); Baumgart, A.

    2002-02-01

    This report is a collection of notes which were intended to be short communications. Main target of the work presented is to supply new approaches to stability investigations of wind turbines. The authors opinion is that an efficient, systematic stability analysis can not be performed for large systems of differential equations (i.e. the order of the differential equations > 100), because numerical 'effects' in the solution of the equations of motion as initial value problem, eigenvalue problem or whatsoever become predominant. It is therefore necessary to find models which are reduced to the elementary coordinates but which can still describe the physical processes under consideration with sufficiently good accuracy. Such models are presented. (au)

  8. The G2 erosion model: An algorithm for month-time step assessments.

    Science.gov (United States)

    Karydas, Christos G; Panagos, Panos

    2018-02-01

    A detailed description of the G2 erosion model is presented, in order to support potential users. G2 is a complete, quantitative algorithm for mapping soil loss and sediment yield rates on month-time intervals. G2 has been designed to run in a GIS environment, taking input from geodatabases available by European or other international institutions. G2 adopts fundamental equations from the Revised Universal Soil Loss Equation (RUSLE) and the Erosion Potential Method (EPM), especially for rainfall erosivity, soil erodibility, and sediment delivery ratio. However, it has developed its own equations and matrices for the vegetation cover and management factor and the effect of landscape alterations on erosion. Provision of month-time step assessments is expected to improve understanding of erosion processes, especially in relation to land uses and climate change. In parallel, G2 has full potential to decision-making support with standardised maps on a regular basis. Geospatial layers of rainfall erosivity, soil erodibility, and terrain influence, recently developed by the Joint Research Centre (JRC) on a European or global scale, will further facilitate applications of G2. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  9. Assessing Vulnerability of Lake Erie Landscapes to Soil Erosion: Modelled and Measured Approaches

    Science.gov (United States)

    Joosse, P.; Laamrani, A.; Feisthauer, N.; Li, S.

    2017-12-01

    Loss of soil from agricultural landscapes to Lake Erie via water erosion is a key transport mechanism for phosphorus bound to soil particles. Agriculture is the dominant land use in the Canadian side of the Lake Erie basin with approximately 75% of the 2.3 million hectares under crop or livestock production. The variable geography and diversity of agricultural production systems and management practices makes estimating risk of soil erosion from agricultural landscapes in the Canadian Lake Erie basin challenging. Risk of soil erosion depends on a combination of factors including the extent to which soil remains bare, which differs with crop type and management. Two different approaches of estimating the vulnerability of landscapes to soil erosion will be compared among Soil Landscapes of Canada in the Lake Erie basin: a modelling approach incorporating farm census and soil survey data, represented by the 2011 Agriculture and Agri-Food Canada Agri-Environmental Indicator for Soil Erosion Risk; and, a measured approach using remotely sensed data that quantifies the magnitude of bare and covered soil across the basin. Results from both approaches will be compared by scaling the national level (1:1 million) Soil Erosion Risk Indicator and the remotely sensed data (30x30 m resolution) to the quaternary watershed level.

  10. Wall modeled LES of wind turbine wakes with geometrical effects

    Science.gov (United States)

    Bricteux, Laurent; Benard, Pierre; Zeoli, Stephanie; Moureau, Vincent; Lartigue, Ghislain; Vire, Axelle

    2017-11-01

    This study focuses on prediction of wind turbine wakes when geometrical effects such as nacelle, tower, and built environment, are taken into account. The aim is to demonstrate the ability of a high order unstructured solver called YALES2 to perform wall modeled LES of wind turbine wake turbulence. The wind turbine rotor is modeled using an Actuator Line Model (ALM) while the geometrical details are explicitly meshed thanks to the use of an unstructured grid. As high Reynolds number flows are considered, sub-grid scale models as well as wall modeling are required. The first test case investigated concerns a wind turbine flow located in a wind tunnel that allows to validate the proposed methodology using experimental data. The second test case concerns the simulation of a wind turbine wake in a complex environment (e.g. a Building) using realistic turbulent inflow conditions.

  11. Evaluation of different machine learning models for predicting and mapping the susceptibility of gully erosion

    Science.gov (United States)

    Rahmati, Omid; Tahmasebipour, Nasser; Haghizadeh, Ali; Pourghasemi, Hamid Reza; Feizizadeh, Bakhtiar

    2017-12-01

    Gully erosion constitutes a serious problem for land degradation in a wide range of environments. The main objective of this research was to compare the performance of seven state-of-the-art machine learning models (SVM with four kernel types, BP-ANN, RF, and BRT) to model the occurrence of gully erosion in the Kashkan-Poldokhtar Watershed, Iran. In the first step, a gully inventory map consisting of 65 gully polygons was prepared through field surveys. Three different sample data sets (S1, S2, and S3), including both positive and negative cells (70% for training and 30% for validation), were randomly prepared to evaluate the robustness of the models. To model the gully erosion susceptibility, 12 geo-environmental factors were selected as predictors. Finally, the goodness-of-fit and prediction skill of the models were evaluated by different criteria, including efficiency percent, kappa coefficient, and the area under the ROC curves (AUC). In terms of accuracy, the RF, RBF-SVM, BRT, and P-SVM models performed excellently both in the degree of fitting and in predictive performance (AUC values well above 0.9), which resulted in accurate predictions. Therefore, these models can be used in other gully erosion studies, as they are capable of rapidly producing accurate and robust gully erosion susceptibility maps (GESMs) for decision-making and soil and water management practices. Furthermore, it was found that performance of RF and RBF-SVM for modelling gully erosion occurrence is quite stable when the learning and validation samples are changed.

  12. Testing model parameters for wave‐induced dune erosion using observations from Hurricane Sandy

    Science.gov (United States)

    Overbeck, Jacquelyn R.; Long, Joseph W.; Stockdon, Hilary F.

    2017-01-01

    Models of dune erosion depend on a set of assumptions that dictate the predicted evolution of dunes throughout the duration of a storm. Lidar observations made before and after Hurricane Sandy at over 800 profiles with diverse dune elevations, widths, and volumes are used to quantify specific dune erosion model parameters including the dune face slope, which controls dune avalanching, and the trajectory of the dune toe, which controls dune migration. Wave‐impact models of dune erosion assume a vertical dune face and erosion of the dune toe along the foreshore beach slope. Observations presented here show that these assumptions are not always valid and require additional testing if these models are to be used to predict coastal vulnerability for decision‐making purposes. Observed dune face slopes steepened by 43% yet did not become vertical faces, and only 50% of the dunes evolved along a trajectory similar to the foreshore beach slope. Observations also indicate that dune crests were lowered during dune erosion. Moreover, analysis showed a correspondence between dune lowering and narrower beaches, smaller dune volumes, and/or longer wave impact.

  13. Methodologies for Wind Turbine and STATCOM Integration in Wind Power Plant Models for Harmonic Resonances Assessment

    DEFF Research Database (Denmark)

    Freijedo Fernandez, Francisco Daniel; Chaudhary, Sanjay Kumar; Guerrero, Josep M.

    2015-01-01

    This paper approaches modelling methodologies for integration of wind turbines and STATCOM in harmonic resonance studies. Firstly, an admittance equivalent model representing the harmonic signature of grid connected voltage source converters is provided. A simplified type IV wind turbine modelling......-domain. As an alternative, a power based averaged modelling is also proposed. Type IV wind turbine harmonic signature and STATCOM active harmonic mitigation are considered for the simulation case studies. Simulation results provide a good insight of the features and limitations of the proposed methodologies....

  14. Wind turbine model and loop shaping controller design

    Science.gov (United States)

    Gilev, Bogdan

    2017-12-01

    A model of a wind turbine is evaluated, consisting of: wind speed model, mechanical and electrical model of generator and tower oscillation model. Model of the whole system is linearized around of a nominal point. By using the linear model with uncertainties is synthesized a uncertain model. By using the uncertain model is developed a H∞ controller, which provide mode of stabilizing the rotor frequency and damping the tower oscillations. Finally is simulated work of nonlinear system and H∞ controller.

  15. Glide back booster wind tunnel model testing

    Science.gov (United States)

    Pricop, M. V.; Cojocaru, M. G.; Stoica, C. I.; Niculescu, M. L.; Neculaescu, A. M.; Persinaru, A. G.; Boscoianu, M.

    2017-07-01

    Affordable space access requires partial or ideally full launch vehicle reuse, which is in line with clean environment requirement. Although the idea is old, the practical use is difficult, requiring very large technology investment for qualification. Rocket gliders like Space Shuttle have been successfullyoperated but the price and correspondingly the energy footprint were found not sustainable. For medium launchers, finally there is a very promising platform as Falcon 9. For very small launchers the situation is more complex, because the performance index (payload to start mass) is already small, versus medium and heavy launchers. For partial reusable micro launchers this index is even smaller. However the challenge has to be taken because it is likely that in a multiyear effort, technology is going to enable the performance recovery to make such a system economically and environmentally feasible. The current paper is devoted to a small unitary glide back booster which is foreseen to be assembled in a number of possible configurations. Although the level of analysis is not deep, the solution is analyzed from the aerodynamic point of view. A wind tunnel model is designed, with an active canard, to enablea more efficient wind tunnel campaign, as a national level premiere.

  16. Use of wind data in global modelling

    Science.gov (United States)

    Pailleux, J.

    1985-01-01

    The European Centre for Medium Range Weather Forecasts (ECMWF) is producing operational global analyses every 6 hours and operational global forecasts every day from the 12Z analysis. How the wind data are used in the ECMWF golbal analysis is described. For each current wind observing system, its ability to provide initial conditions for the forecast model is discussed as well as its weaknesses. An assessment of the impact of each individual system on the quality of the analysis and the forecast is given each time it is possible. Sometimes the deficiencies which are pointed out are related not only to the observing system itself but also to the optimum interpolation (OI) analysis scheme; then some improvements are generally possible through ad hoc modifications of the analysis scheme and especially tunings of the structure functions. Examples are given. The future observing network over the North Atlantic is examined. Several countries, coordinated by WMO, are working to set up an 'Operational WWW System Evaluation' (OWSE), in order to evaluate the operational aspects of the deployment of new systems (ASDAR, ASAP). Most of the new systems are expected to be deployed before January 1987, and in order to make the best use of the available resources during the deployment phase, some network studies are carried out at the present time, by using simulated data for ASDAR and ASAP systems. They are summarized.

  17. Multiobjective Optimization Model for Wind Power Allocation

    Directory of Open Access Journals (Sweden)

    Juan Alemany

    2017-01-01

    Full Text Available There is an increasing need for the injection to the grid of renewable energy; therefore, to evaluate the optimal location of new renewable generation is an important task. The primary purpose of this work is to develop a multiobjective optimization model that permits finding multiple trade-off solutions for the location of new wind power resources. It is based on the augmented ε-constrained methodology. Two competitive objectives are considered: maximization of preexisting energy injection and maximization of new wind energy injection, both embedded, in the maximization of load supply. The results show that the location of new renewable generation units affects considerably the transmission network flows, the load supply, and the preexisting energy injection. Moreover, there are diverse opportunities to benefit the preexisting generation, contrarily to the expected effect where renewable generation displaces conventional power. The proposed methodology produces a diverse range of equivalent solutions, expanding and enriching the horizon of options and giving flexibility to the decision-making process.

  18. Probabilistic Modeling of Wind Turbine Drivetrain Components

    DEFF Research Database (Denmark)

    Rafsanjani, Hesam Mirzaei

    Wind energy is one of several energy sources in the world and a rapidly growing industry in the energy sector. When placed in offshore or onshore locations, wind turbines are exposed to wave excitations, highly dynamic wind loads and/or the wakes from other wind turbines. Therefore, most componen....../nodules on fatigue life of cast iron samples. The cast iron samples scanned by 3D tomography equipment at the DTU Wind Energy (Risø campus), and the distribution of nodules are used to estimate the fatigue life....

  19. Model of analysis of maximum loads in wind generators produced by extreme winds

    International Nuclear Information System (INIS)

    Herrera – Sánchez, Omar; Schellong, Wolfgang; González – Fernández, Vladimir

    2010-01-01

    The use of the wind energy by means of the wind turbines in areas of high risk of occurrence of Hurricanes comes being an important challenge for the designers of wind farm at world for some years. The wind generator is not usually designed to support this type of phenomena, for this reason the areas of high incidence of tropical hurricanes of the planning are excluded, that which, in occasions disables the use of this renewable source of energy totally, either because the country is very small, or because it coincides the area of more potential fully with that of high risk. To counteract this situation, a model of analysis of maxims loads has been elaborated taken place the extreme winds in wind turbines of great behavior. This model has the advantage of determining, in a chosen place, for the installation of a wind farm, the micro-areas with higher risk of wind loads above the acceptable for the standard classes of wind turbines. (author)

  20. Erosion risk assessment in the southern Amazon - Data Preprocessing, data base application and process based modelling

    Science.gov (United States)

    Schindewolf, Marcus; Herrmann, Marie-Kristin; Herrmann, Anne-Katrin; Schultze, Nico; Amorim, Ricardo S. S.; Schmidt, Jürgen

    2015-04-01

    The study region along the BR 16 highway belongs to the "Deforestation Arc" at the southern border of the Amazon rainforest. At the same time, it incorporates a land use gradient as colonization started in the 1975-1990 in Central Mato Grosso in 1990 in northern Mato Grosso and most recently in 2004-2005 in southern Pará. Based on present knowledge soil erosion is one of the key driver of soil degradation. Hence, there is a strong need to implement soil erosion control measures in eroding landscapes. Planning and dimensioning of such measures require reliable and detailed information on the temporal and spatial distribution of soil loss, sediment transport and deposition. Soil erosion models are increasingly used, in order to simulate the physical processes involved and to predict the effects of soil erosion control measures. The process based EROSION 3D simulation model is used for surveying soil erosion and deposition on regional catchments. Although EROSION 3D is a widespread, extensively validated model, the application of the model on regional scale remains challenging due to the enormous data requirements and complex data processing operations. In this context the study includes the compilation, validation and generalisation of existing land use and soil data in order to generate a consistent EROSION 3D input datasets. As a part of this process a GIS-linked data base application allows to transfer the original soil and land use data into model specific parameter files. This combined methodology provides different risk assessment maps for certain demands on regional scale. Besides soil loss and sediment transport, sediment pass over points into surface water bodies and particle enrichment can be simulated using the EROSION 3D model. Thus the estimation of particle bound nutrient and pollutant inputs into surface water bodies becomes possible. The study ended up in a user-friendly, timesaving and improved software package for the simulation of soil loss and

  1. Geo-statistical model of Rainfall erosivity by using high temporal resolution precipitation data in Europe

    Science.gov (United States)

    Panagos, Panos; Ballabio, Cristiano; Borrelli, Pasquale; Meusburger, Katrin; Alewell, Christine

    2015-04-01

    Rainfall erosivity (R-factor) is among the 6 input factors in estimating soil erosion risk by using the empirical Revised Universal Soil Loss Equation (RUSLE). R-factor is a driving force for soil erosion modelling and potentially can be used in flood risk assessments, landslides susceptibility, post-fire damage assessment, application of agricultural management practices and climate change modelling. The rainfall erosivity is extremely difficult to model at large scale (national, European) due to lack of high temporal resolution precipitation data which cover long-time series. In most cases, R-factor is estimated based on empirical equations which take into account precipitation volume. The Rainfall Erosivity Database on the European Scale (REDES) is the output of an extensive data collection of high resolution precipitation data in the 28 Member States of the European Union plus Switzerland taking place during 2013-2014 in collaboration with national meteorological/environmental services. Due to different temporal resolutions of the data (5, 10, 15, 30, 60 minutes), conversion equations have been applied in order to homogenise the database at 30-minutes interval. The 1,541 stations included in REDES have been interpolated using the Gaussian Process Regression (GPR) model using as covariates the climatic data (monthly precipitation, monthly temperature, wettest/driest month) from WorldClim Database, Digital Elevation Model and latitude/longitude. GPR has been selected among other candidate models (GAM, Regression Kriging) due the best performance both in cross validation (R2=0.63) and in fitting dataset (R2=0.72). The highest uncertainty has been noticed in North-western Scotland, North Sweden and Finland due to limited number of stations in REDES. Also, in highlands such as Alpine arch and Pyrenees the diversity of environmental features forced relatively high uncertainty. The rainfall erosivity map of Europe available at 500m resolution plus the standard error

  2. Empirical models for predicting wind potential for wind energy applications in rural locations of Nigeria

    Energy Technology Data Exchange (ETDEWEB)

    Odo, F.C. [National Centre for Energy Research and Development, University of Nigeria, Nsukka (Nigeria); Department of Physics and Astronomy, University of Nigeria, Nsukka (Nigeria); Akubue, G.U.; Offiah, S.U.; Ugwuoke, P.E. [National Centre for Energy Research and Development, University of Nigeria, Nsukka (Nigeria)

    2013-07-01

    In this paper, we use the correlation between the average wind speed and ambient temperature to develop models for predicting wind potentials for two Nigerian locations. Assuming that the troposphere is a typical heterogeneous mixture of ideal gases, we find that for the studied locations, wind speed clearly correlates with ambient temperature in a simple polynomial of 3rd degree. The coefficient of determination and root-mean-square error of the models are 0.81; 0.0024 and 0.56; 0.0041, respectively, for Enugu (6.40N; 7.50E) and Owerri (5.50N; 7.00E). These results suggest that the temperature-based model can be used, with acceptable accuracy, in predicting wind potentials needed for preliminary design assessment of wind energy conversion devices for the locations and others with similar meteorological conditions.

  3. The Wind Profile in the Coastal Boundary Layer: Wind Lidar Measurements and Numerical Modelling

    DEFF Research Database (Denmark)

    Floors, Rogier; Vincent, Claire Louise; Gryning, Sven-Erik

    2013-01-01

    Traditionally it has been difficult to verify mesoscale model wind predictions against observations in the planetary boundary layer (PBL). Here we used measurements from a wind lidar to study the PBL up to 800 m above the surface at a flat coastal site in Denmark during a one month period in autu...

  4. Development of county-level wind-erosion and unpaved-road alkaline emission estimates for the 1985 NAPAP (National Acid Precipitation Assessment Program) emissions inventory. Documentation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Barnard, W.R.

    1990-01-01

    The report details the methods used and the result of the conversion of the National Acid Precipitation Assessment Program's (NAPAP's) alkaline-material emissions information for wind erosion, unpaved roads, and dust devils from their current spatial resolution to county-level resolution. Additionally, methods for converting the county-level data to NAPAP's Modelers Inventory grid system are proposed. NAPAP is developing a nationwide emissions inventory of substances contributing to acid precipitation. Also of interest are substances that can neutralize acids in precipitation. Information from NAPAP's natural sources task group on the emissions of alkaline materials (calcium, magnesium, potassium, and sodium) is available, but the spatial resolution is not currently in a form that lends itself to use by either the National Emissions Data System or modelers using the NAPAP Resolved Modelers Inventory grid system.

  5. Model Predictive Control of Wind Turbines using Uncertain LIDAR Measurements

    DEFF Research Database (Denmark)

    Mirzaei, Mahmood; Soltani, Mohsen; Poulsen, Niels Kjølstad

    2013-01-01

    The problem of Model predictive control (MPC) of wind turbines using uncertain LIDAR (LIght Detection And Ranging) measurements is considered. A nonlinear dynamical model of the wind turbine is obtained. We linearize the obtained nonlinear model for different operating points, which are determined...

  6. Developement and introduction of measures for protecting coal from wind erosion during transportation. Razrabotka, vnedrenie mer i sredstv zashchity uglei ot vetrovoi ehrozii pri transportirovanii

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, V.M.; Radovitskii, I.V.; Sazhin, O.B.; Yakubovich, I.L.

    1985-01-01

    Ways are discussed of reducing coal losses during transportation, totalling around 10 million tons per annum (about 50% due to wind erosion). The paper reviews coal protection in USA, FRG, Japan, Czechoslovakia and German Democratic Republic, protective covers, characteristics of water-in-oil emulsions (60% water phase) and their application, results of industrial scale tests, development and principal application of devices for creating protective covering of coal in open trucks, new protective materials for prevention of coal losses (water soluble latex, waste from oil refineries, etc.). Basic physical properties of oil refinery waste are given. Tests proved that this kind of cover can reliably prevent small coal from flying away at railway speeds of 110-120 km/h. The paper describes prevention of coal losses during storage (effect of oxygen, atmospheric precipitation and wind) by special emulsion covers, devices for preparing and depositing protective covering (water saturated steam) and automation of protective covering devices. 5 references.

  7. Modelling erosion on a daily basis, an adaptation of the MMF approach

    Science.gov (United States)

    Shrestha, Dhruba Pikha; Jetten, Victor G.

    2018-02-01

    Effect of soil erosion causing negative impact on ecosystem services and food security is well known. On the other hand there can be yearly variation of total precipitation received in an area, with the presence of extreme rains. To assess annual erosion rates various empirical models have been extensively used in all the climatic regions. While these models are simple to operate and do not require lot of input data, the effect of extreme rain is not taken into account. Although physically based models are available to simulate erosion processes including particle detachment, transportation and deposition of sediments during a storm they are not applicable for assessing annual soil loss rates. Moreover storm event data may not be available everywhere prohibiting their extensive use.

  8. Wind Plant Models in IEC 61400-27-2 and WECC - latest developments in international standards on wind turbine and wind plant modeling

    DEFF Research Database (Denmark)

    Fortmann, Jens; Miller, Nicholas; Kazachkov, Yuri

    2015-01-01

    This paper describes the latest developments in the standardization of wind plant and wind plant controller models. As a first step IEC TC88 WG 27 and WECC jointly developed generic wind turbine models which have been published by WECC in 2014 and IEC in 2015 as IEC 61400-27-1, which also included...... a draft plant controller model in an informative annex. In a second step, parallel activities have been going on in WECC and IEC TC88 WG 27 to create plant models that can include a number of wind turbines, a plant controller and optional equipment. The WECC models are intended to be finalized in 2015...

  9. Assessment of soil erosion risk in Komering watershed, South Sumatera, using SWAT model

    Science.gov (United States)

    Salsabilla, A.; Kusratmoko, E.

    2017-07-01

    Changes in land use watershed led to environmental degradation. Estimated loss of soil erosion is often difficult due to some factors such as topography, land use, climate and human activities. This study aims to predict soil erosion hazard and sediment yield using the Soil and Water Assessment Tools (SWAT) hydrological model. The SWAT was chosen because it can simulate the model with limited data. The study area is Komering watershed (806,001 Ha) in South Sumatera Province. There are two factors land management intervention: 1) land with agriculture, and 2) land with cultivation. These factors selected in accordance with the regulations of spatial plan area. Application of the SWAT demonstrated that the model can predict surface runoff, soil erosion loss and sediment yield. The erosion risk for each watershed can be classified and predicted its changes based on the scenarios which arranged. In this paper, we also discussed the relationship between the distribution of erosion risk and watershed's characteristics in a spatial perspective.

  10. Forecast of muddy floods using high-resolution radar precipitation forcasting data and erosion modelling

    Science.gov (United States)

    Hänsel, Phoebe; Schindewolf, Marcus; Schmidt, Jürgen

    2016-04-01

    In the federal province of Saxony, Eastern Germany, almost 60 % of the agricultural land is endangered by erosion processes, mainly caused by heavy rainfall events. Beside the primary impact of soil loss and decreasing soil fertility, erosion can cause significant effects if transported sediments are entering downslope settlements, infrastructure or traffic routes. Available radar precipitation data are closing the gap between the conventional rainfall point measurements and enable the nationwide rainfall distribution with high spatial and temporal resolution. By means of the radar precipitation data of the German Weather Service (DWD), high-resolution radar-based rainfall data totals up to 5 minute time steps are possible. The radar data are visualised in a grid-based hourly precipitation map. In particular, the daily and hourly precipitation maps help to identify regions with heavy rainfall and possible erosion events. In case of an erosion event on agricultural land, these areas are mapped with an unmanned airborne vehicle (UAV). The camera-equipped UAV delivers high-resolution images of the erosion event, that allow the generation of high-resolution orthophotos. By the application of the high-resolution radar precipitation data as an input for the process-based soil loss and deposition model EROSION 3D, these images are for validation purposes. Future research is focused on large scale soil erosion modelling with the help of the radar forecasting product and an automatic identification of sediment pass over points. The study will end up with an user friendly muddy flood warning tool, which allows the local authorities to initiate immediate measures in order to prevent severe damages in settlements, infrastructure or traffic routes.

  11. Modelling sheet erosion on steep slopes in the loess region of China

    Science.gov (United States)

    Wu, Bing; Wang, Zhanli; Zhang, Qingwei; Shen, Nan; Liu, June

    2017-10-01

    The relationship of sheet erosion rate (SE), slope gradient (S) and rainfall intensity (I), and hydraulic parameters, such as flow velocity (V), shear stress (τ), stream power (Ω) and unit stream power (P), was investigated to derive an accurate experimental model. The experiment was conducted at slopes of 12.23%, 17.63%, 26.8%, 36.4%, 40.4% and 46.63% under I of 48, 60, 90, 120, 138 and 150 mm h-1, respectively, using simulated rainfall. Results showed that sheet erosion rate increased as a power function with rainfall intensity and slope gradient with R2 = 0.95 and Nash-Sutcliffe model efficiency (NSE) = 0.87. Sheet erosion rate was more sensitive to rainfall intensity than to slope gradient. It increased as a power function with flow velocity, which was satisfactory for predicting sheet erosion rate with R2 = 0.95 and NSE = 0.81. Shear stress and stream power could be used to predict sheet erosion rate accurately with a linear function equation. Stream power (R2 = 0.97, NSE = 0.97) was a better predictor of sheet erosion rather than shear stress (R2 = 0.90, NSE = 0.89). However, a prediction based on unit stream power was poor. The new equation (i.e. SE = 7.5 ×1012S1.43I3.04 and SE = 0.06 Ω - 0.0003 and SE = 0.011 τ - 0.01) would improve water erosion estimation on loess hillslopes of China.

  12. Modelling dune erosion, overwash and breaching at Fire Island (NY) during hurricane Sandy

    NARCIS (Netherlands)

    De Vet, P.L.M.; McCall, R.T.; Den Bieman, J.P.; Stive, M.J.F.; Van Ormondt, M.

    2015-01-01

    In 2012, Hurricane Sandy caused a breach at Fire Island (NY, USA), near Pelican Island. This paper aims at modelling dune erosion, overwash and breaching processes that occured during the hurricane event at this stretch of coast with the numerical model XBeach. By using the default settings, the

  13. Modelling spatial patterns of erosion in the West Usambara Mountains of Tanzania

    NARCIS (Netherlands)

    Vigiak, O.

    2005-01-01

    Prompt location of sources and sinks of sediment within a catchment would allow more effective Soil and Water Conservation (SWC) planning. Distributed erosion models are valuable tools for watershed planning, but the quality of spatially distributed model predictions is seriously hampered by the

  14. Wall Correction Model for Wind Tunnels with Open Test Section

    DEFF Research Database (Denmark)

    Sørensen, Jens Nørkær; Shen, Wen Zhong; Mikkelsen, Robert Flemming

    2004-01-01

    In th paper we present a correction model for wall interference on rotors of wind turbines or propellers in wind tunnels. The model, that is based on a onedimensional momentum approach, is validated against results from CFD computations using a generalized actuator disc principle. Generally......, the corrections from the model are in very good agreement with the CFD computaions, demonstrating that one-dimensional momentum theory is a reliable way of predicting corrections for wall interference in wind tunnels with closed as well as open cross sections. Keywords: Wind tunnel correction, momentum theory...

  15. SimWIND: A Geospatial Infrastructure Model for Wind Energy Production and Transmission

    Science.gov (United States)

    Middleton, R. S.; Phillips, B. R.; Bielicki, J. M.

    2009-12-01

    Wind is a clean, enduring energy resource with a capacity to satisfy 20% or more of the electricity needs in the United States. A chief obstacle to realizing this potential is the general paucity of electrical transmission lines between promising wind resources and primary load centers. Successful exploitation of this resource will therefore require carefully planned enhancements to the electric grid. To this end, we present the model SimWIND for self-consistent optimization of the geospatial arrangement and cost of wind energy production and transmission infrastructure. Given a set of wind farm sites that satisfy meteorological viability and stakeholder interest, our model simultaneously determines where and how much electricity to produce, where to build new transmission infrastructure and with what capacity, and where to use existing infrastructure in order to minimize the cost for delivering a given amount of electricity to key markets. Costs and routing of transmission line construction take into account geographic and social factors, as well as connection and delivery expenses (transformers, substations, etc.). We apply our model to Texas and consider how findings complement the 2008 Electric Reliability Council of Texas (ERCOT) Competitive Renewable Energy Zones (CREZ) Transmission Optimization Study. Results suggest that integrated optimization of wind energy infrastructure and cost using SimWIND could play a critical role in wind energy planning efforts.

  16. A canopy-type similarity model for wind farm optimization

    Science.gov (United States)

    Markfort, Corey D.; Zhang, Wei; Porté-Agel, Fernando

    2013-04-01

    The atmospheric boundary layer (ABL) flow through and over wind farms has been found to be similar to canopy-type flows, with characteristic flow development and shear penetration length scales (Markfort et al., 2012). Wind farms capture momentum from the ABL both at the leading edge and from above. We examine this further with an analytical canopy-type model. Within the flow development region, momentum is advected into the wind farm and wake turbulence draws excess momentum in from between turbines. This spatial heterogeneity of momentum within the wind farm is characterized by large dispersive momentum fluxes. Once the flow within the farm is developed, the area-averaged velocity profile exhibits a characteristic inflection point near the top of the wind farm, similar to that of canopy-type flows. The inflected velocity profile is associated with the presence of a dominant characteristic turbulence scale, which may be responsible for a significant portion of the vertical momentum flux. Prediction of this scale is useful for determining the amount of available power for harvesting. The new model is tested with results from wind tunnel experiments, which were conducted to characterize the turbulent flow in and above model wind farms in aligned and staggered configurations. The model is useful for representing wind farms in regional scale models, for the optimization of wind farms considering wind turbine spacing and layout configuration, and for assessing the impacts of upwind wind farms on nearby wind resources. Markfort CD, W Zhang and F Porté-Agel. 2012. Turbulent flow and scalar transport through and over aligned and staggered wind farms. Journal of Turbulence. 13(1) N33: 1-36. doi:10.1080/14685248.2012.709635.

  17. Segmented relationships to model erosion of regression effect in Cox regression.

    Science.gov (United States)

    Muggeo, Vito M R; Attanasio, Massimo

    2011-08-01

    In this article we propose a parsimonious parameterisation to model the so-called erosion of the covariate effect in the Cox model, namely a covariate effect approaching to zero as the follow-up time increases. The proposed parameterisation is based on the segmented relationship where proper constraints are set to accomodate for the erosion. Relevant hypothesis testing is discussed. The approach is illustrated on two historical datasets in the survival analysis literature, and some simulation studies are presented to show how the proposed framework leads to a test for a global effect with good power as compared with alternative procedures. Finally, possible generalisations are also presented for future research.

  18. 7Be and hydrological model for more efficient implementation of erosion control measure

    Science.gov (United States)

    Al-Barri, Bashar; Bode, Samuel; Blake, William; Ryken, Nick; Cornelis, Wim; Boeckx, Pascal

    2014-05-01

    Increased concern about the on-site and off-site impacts of soil erosion in agricultural and forested areas has endorsed interest in innovative methods to assess in an unbiased way spatial and temporal soil erosion rates and redistribution patterns. Hence, interest in precisely estimating the magnitude of the problem and therefore applying erosion control measures (ECM) more efficiently. The latest generation of physically-based hydrological models, which fully couple overland flow and subsurface flow in three dimensions, permit implementing ECM in small and large scales more effectively if coupled with a sediment transport algorithm. While many studies focused on integrating empirical or numerical models based on traditional erosion budget measurements into 3D hydrological models, few studies evaluated the efficiency of ECM on watershed scale and very little attention is given to the potentials of environmental Fallout Radio-Nuclides (FRNs) in such applications. The use of FRN tracer 7Be in soil erosion/deposition research proved to overcome many (if not all) of the problems associated with the conventional approaches providing reliable data for efficient land use management. This poster will underline the pros and cones of using conventional methods and 7Be tracers to evaluate the efficiency of coconuts dams installed as ECM in experimental field in Belgium. It will also outline the potentials of 7Be in providing valuable inputs for evolving the numerical sediment transport algorithm needed for the hydrological model on field scale leading to assess the possibility of using this short-lived tracer as a validation tool for the upgraded hydrological model on watershed scale in further steps. Keywords: FRN, erosion control measures, hydrological modes

  19. Accurate wind farm development and operation. Advanced wake modelling

    Energy Technology Data Exchange (ETDEWEB)

    Brand, A.; Bot, E.; Ozdemir, H. [ECN Unit Wind Energy, P.O. Box 1, NL 1755 ZG Petten (Netherlands); Steinfeld, G.; Drueke, S.; Schmidt, M. [ForWind, Center for Wind Energy Research, Carl von Ossietzky Universitaet Oldenburg, D-26129 Oldenburg (Germany); Mittelmeier, N. REpower Systems SE, D-22297 Hamburg (Germany))

    2013-11-15

    The ability is demonstrated to calculate wind farm wakes on the basis of ambient conditions that were calculated with an atmospheric model. Specifically, comparisons are described between predicted and observed ambient conditions, and between power predictions from three wind farm wake models and power measurements, for a single and a double wake situation. The comparisons are based on performance indicators and test criteria, with the objective to determine the percentage of predictions that fall within a given range about the observed value. The Alpha Ventus site is considered, which consists of a wind farm with the same name and the met mast FINO1. Data from the 6 REpower wind turbines and the FINO1 met mast were employed. The atmospheric model WRF predicted the ambient conditions at the location and the measurement heights of the FINO1 mast. May the predictability of the wind speed and the wind direction be reasonable if sufficiently sized tolerances are employed, it is fairly impossible to predict the ambient turbulence intensity and vertical shear. Three wind farm wake models predicted the individual turbine powers: FLaP-Jensen and FLaP-Ainslie from ForWind Oldenburg, and FarmFlow from ECN. The reliabilities of the FLaP-Ainslie and the FarmFlow wind farm wake models are of equal order, and higher than FLaP-Jensen. Any difference between the predictions from these models is most clear in the double wake situation. Here FarmFlow slightly outperforms FLaP-Ainslie.

  20. Medium-term erosion simulation of an abandoned mine site using the SIBERIA landscape evolution model

    International Nuclear Information System (INIS)

    Hancock, G.R.; Willgoose, G.R.

    2000-01-01

    This study forms part of a collaborative project designed to validate the long-term erosion predictions of the SIBERIA landform evolution model on rehabilitated mine sites. The SIBERIA catchment evolution model can simulate the evolution of landforms resulting from runoff and erosion over many years. SIBERIA needs to be calibrated before evaluating whether it correctly models the observed evolution of rehabilitated mine landforms. A field study to collect data to calibrate SIBERIA was conducted at the abandoned Scinto 6 uranium mine located in the Kakadu Region, Northern Territory, Australia. The data were used to fit parameter values to a sediment loss model and a rainfall-runoff model. The derived runoff and erosion model parameter values were used in SIBERIA to simulate 50 years of erosion by concentrated flow on the batters of the abandoned site. The SIBERIA runs correctly simulated the geomorphic development of the gullies on the man-made batters of the waste rock dump. The observed gully position, depth, volume, and morphology on the waste rock dump were quantitatively compared with the SIBERIA simulations. The close similarities between the observed and simulated gully features indicate that SIBERIA can accurately predict the rate of gully development on a man-made post-mining landscape over periods of up to 50 years. SIBERIA is an appropriate model for assessment of erosional stability of rehabilitated mine sites over time spans of around 50 years. Copyright (2000) CSIRO Australia

  1. A Reliability Based Model for Wind Turbine Selection

    Directory of Open Access Journals (Sweden)

    A.K. Rajeevan

    2013-06-01

    Full Text Available A wind turbine generator output at a specific site depends on many factors, particularly cut- in, rated and cut-out wind speed parameters. Hence power output varies from turbine to turbine. The objective of this paper is to develop a mathematical relationship between reliability and wind power generation. The analytical computation of monthly wind power is obtained from weibull statistical model using cubic mean cube root of wind speed. Reliability calculation is based on failure probability analysis. There are many different types of wind turbinescommercially available in the market. From reliability point of view, to get optimum reliability in power generation, it is desirable to select a wind turbine generator which is best suited for a site. The mathematical relationship developed in this paper can be used for site-matching turbine selection in reliability point of view.

  2. A mixture model for water uptake, degradation, erosion and drug release from polydisperse polymeric networks.

    Science.gov (United States)

    Soares, João S; Zunino, Paolo

    2010-04-01

    We introduce a general class of mixture models suitable to describe water-dependent degradation and erosion of biodegradable polymers in conjunction with drug release. The ability to predict and quantify degradation and erosion has direct impact in a variety of biomedical applications and is a useful design tool for biodegradable implants and tissue engineering scaffolds. The model is based on a finite number of constituents describing the polydisperse polymeric system, each representing chains of an average size, and two additional constituents, water and drug. Hydrolytic degradation of individual chains occurs at the molecular level and mixture constituents diffuse individually accordingly to Fick's 1st law at the bulk level - such analysis confers a multi-scale aspect to the resulting reaction-diffusion system. A shift between two different types of behavior, each identified to surface or bulk erosion, is observed with the variation of a single non-dimensional parameter measuring the relative importance of the mechanisms of reaction and diffusion. Mass loss follows a sigmoid decrease in bulk eroding polymers, whereas decreases linearly in surface eroding polymers. Polydispersity influences degradation and erosion of bulk eroding polymers and drug release from unstable surface eroding matrices is dramatically enhanced in an erosion-controlled release. Copyright 2010 Elsevier Ltd. All rights reserved.

  3. Model predictive control for wind power gradients

    DEFF Research Database (Denmark)

    Hovgaard, Tobias Gybel; Boyd, Stephen; Jørgensen, John Bagterp

    2015-01-01

    We consider the operation of a wind turbine and a connected local battery or other electrical storage device, taking into account varying wind speed, with the goal of maximizing the total energy generated while respecting limits on the time derivative (gradient) of power delivered to the grid. We...... wind data and modern wind forecasting methods. The simulation results using real wind data demonstrate the ability to reject the disturbances from fast changes in wind speed, ensuring certain power gradients, with an insignificant loss in energy production....... ranges. The system dynamics are quite non-linear, and the constraints and objectives are not convex functions of the control inputs, so the resulting optimal control problem is difficult to solve globally. In this paper, we show that by a novel change of variables, which focuses on power flows, we can...

  4. Enhancements to the Water Erosion Prediction Project (WEPP) for modeling large snow-dominated mountainous forest watersheds

    Science.gov (United States)

    Anurag Srivastava; Joan Q. Wu; William J. Elliot; Erin S. Brooks

    2015-01-01

    The Water Erosion Prediction Project (WEPP) model, originally developed for hillslope and small watershed applications, simulates complex interactive processes influencing erosion. Recent incorporations to the model have improved the subsurface hydrology components for forest applications. Incorporation of channel routing has made the WEPP model well suited for large...

  5. Change of precipitation characteristics in the water-wind erosion crisscross region on the Loess Plateau, China, from 1958 to 2015.

    Science.gov (United States)

    Zhao, Xingkai; Li, Zengyao; Zhu, Qingke

    2017-08-14

    Precipitation plays an important and crucial role in processes in the water-wind erosion crisscross region of the Loess Plateau than in other parts of the region. We analyzed precipitation data and standardized precipitation index (SPI) at 14 representative synoptic stations from 1958 to 2015 used trend-free prewhitening, linear trend estimation, Spearman's rho test, the Mann-Kendall trend test, the Mann-Kendall abrupt change test and rescaled range analysis. The following conclusions were drawn. First, the analysis of monthly precipitation at all stations suggested that precipitation during the rainy season (July, August, September), especially rain in July and August, exhibited a general decreasing trend, while both increasing and decreasing trends were observed in other months. Moreover, the annual precipitation of all stations continued to exhibit decreasing trends except Wuzhai. Erosive rainfall frequency in the rainy season and the annual scale was weakly reduced but erosive force of single rainfall has been enhanced. Second, the SPI exhibited different increasing degrees in winter, while decreasing trends were observed in other seasons. Additionally, the annual-scale SPI at most stations exhibited a stable and sustained downward trend. Therefore, this region is currently associated with a drought trend, and the drought degree will likely continue to increase.

  6. Modeling and implementation of wind shear data

    Science.gov (United States)

    Frost, Walter

    1987-01-01

    The problems of implementing the JAWS wind shear data are discussed. The data sets are described from the view of utilizing them in an aircraft performance computer program. Then, some of the problems of nonstandard procedures are described in terms of programming the equations of aircraft motion when the effects of temporal and spatially variable winds are included. Finally, some of the computed effects of the various wind shear terms are shown.

  7. Modeling and Parameter Estimation of a Small Wind Generation System

    Directory of Open Access Journals (Sweden)

    Carlos A. Ramírez Gómez

    2013-11-01

    Full Text Available The modeling and parameter estimation of a small wind generation system is presented in this paper. The system consists of a wind turbine, a permanent magnet synchronous generator, a three phase rectifier, and a direct current load. In order to estimate the parameters wind speed data are registered in a weather station located in the Fraternidad Campus at ITM. Wind speed data were applied to a reference model programed with PSIM software. From that simulation, variables were registered to estimate the parameters. The wind generation system model together with the estimated parameters is an excellent representation of the detailed model, but the estimated model offers a higher flexibility than the programed model in PSIM software.

  8. Elements of extreme wind modeling for hurricanes

    DEFF Research Database (Denmark)

    Larsen, Søren Ejling; Ejsing Jørgensen, Hans; Kelly, Mark C.

    The report summarizes characteristics of the winds associated with Tropical Cyclones (Hurricanes, Typhoons). It has been conducted by the authors across several years, from 2012-2015, to identify the processes and aspects that one should consider when building at useful computer support system...... for evaluation hurricane extreme wind conditions for a given offshore site. It was initiated by a grant from DNV that has as well been represented by one of the authors in this report. Finally, we wish to emphasize the debt of this report to an earlier work at the DTU-Wind Energy Department on “Extreme winds...

  9. Soil erosion and sediment connectivity modelling in Burgundy vineyards: case study of Mercurey, France

    Science.gov (United States)

    Fressard, Mathieu; Cossart, Étienne; Lejot, Jêrome; Michel, Kristell; Perret, Franck; Christol, Aurélien; Mathian, Hélène; Navratil, Oldrich

    2017-04-01

    This research aims at assessing the impact of agricultural landscape structure on soil erosion and sediment connectivity at the catchment scale. The investigations were conducted the vineyards of Mercurey (Burgundy, France), characterized by important issues related to soil loss, flash floods and associated management infrastructures maintenance. The methodology is based on two main steps that include (1) field investigations and (2) modelling. The field investigations consists in DEM acquisition by LiDAR imaging from a drone, soil mapping and human infrastructures impacting runoff classification and mapping (such as crop rows, storm water-basins, drainage network, roads, etc.). These data aims at supplying the models with field observations. The modelling strategy is based on two main steps: First, the modelling of soil sensitivity to erosion, using the spatial application of the RUSLE equation. Secondly, to assess the sediment connectivity in this area, a model based on graph theory developed by Cossart and Fressard (2017) is tested. The results allow defining the influence of different anthropogenic structures on the sediment connectivity and soil erosion at the basin scale. A set of sub-basins influenced by various anthropogenic infrastructures have been identified and show contrasted sensitivities to erosion. The modelling of sediment connectivity show that the runoff pattern is strongly influenced by the vine rows orientation and the drainage network. I has also permitted to identify non collected (by storm water-basins) areas that strongly contribute to the turbid floods sediment supply and to soil loss during high intensity precipitations events.

  10. A Reduced Wind Power Grid Model for Research and Education

    DEFF Research Database (Denmark)

    Akhmatov, Vladislav; Lund, Torsten; Hansen, Anca Daniela

    2007-01-01

    A reduced grid model of a transmission system with a number of central power plants, consumption centers, local wind turbines and a large offshore wind farm is developed and implemented in the simulation tool PowerFactory (DIgSILENT). The reduced grid model is given by Energinet.dk, Transmission...

  11. Modelling and measurements of wakes in large wind farms

    DEFF Research Database (Denmark)

    Barthelmie, Rebecca Jane; Rathmann, Ole; Frandsen, Sten Tronæs

    2007-01-01

    The paper presents research conducted in the Flow workpackage of the EU funded UPWIND project which focuses on improving models of flow within and downwind of large wind farms in complex terrain and offshore. The main activity is modelling the behaviour of wind turbine wakes in order to improve p...

  12. Calculation of extreme wind atlases using mesoscale modeling. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, X.G..; Badger, J.

    2012-06-15

    The objective of this project is to develop new methodologies for extreme wind atlases using mesoscale modeling. Three independent methodologies have been developed. All three methodologies are targeted at confronting and solving the problems and drawbacks in existing methods for extreme wind estimation regarding the use of modeled data (coarse resolution, limited representation of storms) and measurements (short period and technical issues). The first methodology is called the selective dynamical downscaling method. For a chosen area, we identify the yearly strongest storms through global reanalysis data at each model grid point and run a mesoscale model, here the Weather Research and Forecasting (WRF) model, for all storms identified. Annual maximum winds and corresponding directions from each mesoscale grid point are then collected, post-processed and used in Gumbel distribution to obtain the 50-year wind. The second methodology is called the statistical-dynamical downscaling method. For a chosen area, the geostrophic winds at a representative grid point from the global reanalysis data are used to obtain the annual maximum winds in 12 sectors for a period of 30 years. This results in 360 extreme geostrophic winds. Each of the 360 winds is used as a stationary forcing in a mesoscale model, here KAMM. For each mesoscale grid point the annual maximum winds are post-processed and used to a Gumbel fit to obtain the 50-year wind. For the above two methods, the post-processing is an essential part. It calculates the speedup effects using a linear computation model (LINCOM) and corrects the winds from the mesoscale modeling to a standard condition, i.e. 10 m above a homogeneous surface with a roughness length 5 cm. Winds of the standard condition can then be put into a microscale model to resolve the local terrain and roughness effects around particular turbine sites. By converting both the measured and modeled winds to the same surface conditions through the post

  13. Wind turbine noise propagation modelling: An unsteady approach

    DEFF Research Database (Denmark)

    Barlas, Emre; Zhu, Wei Jun; Shen, Wen Zhong

    2016-01-01

    Wind turbine sound generation and propagation phenomena are inherently time dependent, hence tools that incorporate the dynamic nature of these two issues are needed for accurate modelling. In this paper, we investigate the sound propagation from a wind turbine by considering the effects of unste......Wind turbine sound generation and propagation phenomena are inherently time dependent, hence tools that incorporate the dynamic nature of these two issues are needed for accurate modelling. In this paper, we investigate the sound propagation from a wind turbine by considering the effects...

  14. A Method for Modeling of Floating Vertical Axis Wind Turbine

    DEFF Research Database (Denmark)

    Wang, Kai; Hansen, Martin Otto Laver; Moan, Torgeir

    2013-01-01

    It is of interest to investigate the potential advantages of floating vertical axis wind turbine (FVAWT) due to its economical installation and maintenance. A novel 5MW vertical axis wind turbine concept with a Darrieus rotor mounted on a semi-submersible support structure is proposed in this paper....... In order to assess the technical and economic feasibility of this novel concept, a comprehensive simulation tool for modeling of the floating vertical axis wind turbine is needed. This work presents the development of a coupled method for modeling of the dynamics of a floating vertical axis wind turbine...

  15. ERO modeling and sensitivity analysis of locally enhanced beryllium erosion by magnetically connected antennas

    Science.gov (United States)

    Lasa, A.; Borodin, D.; Canik, J. M.; Klepper, C. C.; Groth, M.; Kirschner, A.; Airila, M. I.; Borodkina, I.; Ding, R.; Contributors, JET

    2018-01-01

    Experiments at JET showed locally enhanced, asymmetric beryllium (Be) erosion at outer wall limiters when magnetically connected ICRH antennas were in operation. A first modeling effort using the 3D erosion and scrape-off layer impurity transport modeling code ERO reproduced qualitatively the experimental outcome. However, local plasma parameters—in particular when 3D distributions are of interest—can be difficult to determine from available diagnostics and so erosion / impurity transport modeling input relies on output from other codes and simplified models, increasing uncertainties in the outcome. In the present contribution, we introduce and evaluate the impact of improved models and parameters with largest uncertainties of processes that impact impurity production and transport across the scrape-off layer, when simulated in ERO: (i) the magnetic geometry has been revised, for affecting the separatrix position (located 50-60 mm away from limiter surface) and thus the background plasma profiles; (ii) connection lengths between components, which lead to shadowing of ion fluxes, are also affected by the magnetic configuration; (iii) anomalous transport of ionized impurities, defined by the perpendicular diffusion coefficient, has been revisited; (iv) erosion yields that account for energy and angular distributions of background plasma ions under the present enhanced sheath potential and oblique magnetic field, have been introduced; (v) the effect of additional erosion sources, such as charge-exchange neutral fluxes, which are dominant in recessed areas like antennas, has been evaluated; (vi) chemically assisted release of Be in molecular form has been included. Sensitivity analysis highlights a qualitative effect (i.e. change in emission patterns) of magnetic shadowing, anomalous diffusion, and inclusion of neutral fluxes and molecular release of Be. The separatrix location, and energy and angular distribution of background plasma fluxes impact erosion

  16. Experimental studies on power transformer model winding provided with MOVs

    Directory of Open Access Journals (Sweden)

    G.H. Kusumadevi

    2017-05-01

    Full Text Available Surge voltage distribution across a HV transformer winding due to appearance of very fast rise time (rise time of order 1 μs transient voltages is highly non-uniform along the length of the winding for initial time instant of occurrence of surge. In order to achieve nearly uniform initial time instant voltage distribution along the length of the HV winding, investigations have been carried out on transformer model winding. By connecting similar type of metal oxide varistors across sections of HV transformer model winding, it is possible to improve initial time instant surge voltage distribution across length of the HV transformer winding. Transformer windings with α values 5.3, 9.5 and 19 have been analyzed. The experimental studies have been carried out using high speed oscilloscope of good accuracy. The initial time instant voltage distribution across sections of winding with MOV remains nearly uniform along length of the winding. Also results of fault diagnostics carried out with and without connection of MOVs across sections of winding are reported.

  17. Wind Farm Wake Models From Full Scale Data

    DEFF Research Database (Denmark)

    Knudsen, Torben; Bak, Thomas

    2012-01-01

    on real full scale data. The modelling is based on so called effective wind speed. It is shown that there is a wake for a wind direction range of up to 20 degrees. Further, when accounting for the wind direction it is shown that the two model structures considered can both fit the experimental data......This investigation is part of the EU FP7 project “Distributed Control of Large-Scale Offshore Wind Farms”. The overall goal in this project is to develop wind farm controllers giving power set points to individual turbines in the farm in order to minimise mechanical loads and optimise power. One...... control configuration examined is distributed control where turbines only communicate with their nearest upwind neighbors. Design of such controllers needs wake models and these models should ideally be distributed. This paper compares two simple multiple wake models for this purpose. The study is based...

  18. The determination of risk areas for muddy floods based on a worst-case erosion modelling

    Science.gov (United States)

    Saathoff, Ulfert; Schindewolf, Marcus; Annika Arévalo, Sarah

    2013-04-01

    Soil erosion and muddy floods are a frequently occurring hazard in the German state of Saxony, because of the topography and the high relief energy together with the high proportion of arable land. Still, the events are rather heterogeneously distributed and we do not know where damage is likely to occur. The goal of this study is to locate hot spots for the risk of muddy floods, with the objective to prevent high economic damage in future. We applied a soil erosion and deposition map of Saxony, calculated with the process based soil erosion model EROSION 3D. This map shows the potential soil erosion and transported sediment for worst case soil conditions and a 10 year rain storm event. Furthermore, a map of the current landuse in the state is used. From the landuse map, we extracted those areas that are especially vulnerable to muddy floods, like residential and industrial areas, infrastructural facilities (e.g. power plants, hospitals) and highways. In combination with the output of the soil erosion model, the amount of sediment, that enters each single landuse entity, is calculated. Based on this data, a state-wide map with classified risks is created. The results are furthermore used to identify the risk of muddy floods for each single municipality in Saxony. The results are evaluated with data of real occurred muddy flood events with documented locations during the period between 2000 and 2010. Additionally, plausibility tests are performed for selected areas (examination of landuse, topography and soil). The results prove to be plausible and most of the documented events can be explained by the modelled risk map. The created map can be used by different institutions like city and traffic planners, to estimate the risk of muddy flood occurrence at specific locations. Furthermore, the risk map can serve insurance companies to evaluate the insurance risk of a building. To make them easily accessible, the risk map will be published online via a web GIS

  19. Regional soil erosion assessment in Slovakia using modelling and farmer's participation

    DEFF Research Database (Denmark)

    Kenderessy, Pavol; Veihe, Anita

    There has been an increasing interest by decision makers to obtain regional assessments of soil erosion risk, whereas many existing models require substantial amounts of high quality input data with high spatial resolution and they are often only validated at the plot level. Operational models fo...... are now being identified using farmer participation to ensure that the ‘correct’ hot spot areas are being identified. In the end, scenarios will be set up to assess the effect of farming practices and/or conservation measures on soil erosion rates in the area.......There has been an increasing interest by decision makers to obtain regional assessments of soil erosion risk, whereas many existing models require substantial amounts of high quality input data with high spatial resolution and they are often only validated at the plot level. Operational models...... for erosion risk assessments at the landscape scale in Slovakia using a combination of quantitative and qualitative methods for assessing spatial prediction patterns. The model was set up for the Paríž catchment (239.93 km2) in south-western Slovakia. The area has been intensively cultivated primarily...

  20. Limited Area Forecasting and Statistical Modelling for Wind Energy Scheduling

    DEFF Research Database (Denmark)

    Rosgaard, Martin Haubjerg

    forecast accuracy for operational wind power scheduling. Numerical weather prediction history and scales of atmospheric motion are summarised, followed by a literature review of limited area wind speed forecasting. Hereafter, the original contribution to research on the topic is outlined. The quality...... control of wind farm data used as forecast reference is described in detail, and a preliminary limited area forecasting study illustrates the aggravation of issues related to numerical orography representation and accurate reference coordinates at ne weather model resolutions. For the o shore and coastal...... sites studied limited area forecasting is found to deteriorate wind speed prediction accuracy, while inland results exhibit a steady forecast performance increase with weather model resolution. Temporal smoothing of wind speed forecasts is shown to improve wind power forecast performance by up to almost...

  1. The origin of Venusian channels: Modelling of thermal erosion by lava

    Science.gov (United States)

    Bussey, D. B. J.; Sorensen, S-A.; Guest, J. E.

    1993-01-01

    Magellan imagery has revealed that channels, apparently volcanic in origin, are abundant on the surface of Venus. There has been much debate about the origin of these channels. Are they the result of erosional (either thermal or mechanical) or constructional processes? A common characteristic of the simple sinuous channels is that they show evidence of erosion near their source and then become purely constructional, forming levees and in some cases roofing over completely. One method of showing that thermal erosion is capable of producing the type of channels seen is to use computer modeling incorporating the physical conditions on Venus and the physical characteristics of the different types of lava that may have been erupted. It is possible to calculate, relatively easily, two channel parameters. The first is the erosion rate, which combined with eruption duration, gives depth. The second is for how long after leaving the source the erupted lava will continue to be capable of thermal erosion before constructional processes dominate. Making assumptions about the rheology of the lava (e.g., assume it behaves as a Bingham plastic) along with the slope angle yields a flow velocity and therefore a distance over which thermal erosion will take place. Due to the resolution (both vertical and horizontal) of the Magellan altimetric data, the distance from the source that the channel is erosional can be much more accurately measured than the depth of the channel. This will remain the case until stereo imagery becomes available for large areas of the planet.

  2. Reference Manual for the System Advisor Model's Wind Power Performance Model

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, J.; Jorgenson, J.; Gilman, P.; Ferguson, T.

    2014-08-01

    This manual describes the National Renewable Energy Laboratory's System Advisor Model (SAM) wind power performance model. The model calculates the hourly electrical output of a single wind turbine or of a wind farm. The wind power performance model requires information about the wind resource, wind turbine specifications, wind farm layout (if applicable), and costs. In SAM, the performance model can be coupled to one of the financial models to calculate economic metrics for residential, commercial, or utility-scale wind projects. This manual describes the algorithms used by the wind power performance model, which is available in the SAM user interface and as part of the SAM Simulation Core (SSC) library, and is intended to supplement the user documentation that comes with the software.

  3. Gully erosion in the Caatinga biome, Brazil: measurement and stochastic modelling

    Science.gov (United States)

    Lima Alencar, Pedro Henrique; de Araújo, José Carlos; Nonato Távora Costa, Raimundo

    2017-04-01

    In contrast with inter-rill erosion, which takes a long time to modify the terrain form, gully erosion can fast and severely change the landscape. In the Brazilian semiarid region, a one-million km2 area that coincides with the Caatinga biome, inter-rill erosion prevails due to the silty shallow soils. However, gully erosion does occur in the Caatinga, with temporal increasing severity. This source of sediment impacts the existing dense network of small dams, generating significant deleterious effects, such as water availability reduction in a drought-prone region. This study focuses on the Madalena basin (124 km2, state of Ceará, Brazil), a land-reform settlement with 20 inhabitants per km2, whose main economic activities are agriculture (especially Zea mays), livestock and fishing. In the catchment area, where there are 12 dams (with storage capacity ranging from 6.104 to 2.107 m3), gully erosion has become an issue due to its increasing occurrence. Eight gully-erosion sites have been identified in the basin, but most of them have not yet reached great dimensions (depth and/or width), nor interacted with groundwater, being therefore classified as ephemeral gullies. We selected the three most relevant sites and measured the topography of the eroded channels, as well as the neighboring terrain relief, using accurate total stations and unmanned aerial vehicle. The data was processed with the help of software, such as DataGeosis (Office 7.5) and Surfer (11.0), providing information on gully erosion in terms of (μ ± σ): projection area (317±165 m2), eroded mass (61±36 Mg) and volume (42±25 m3), length (38±6 m), maximum depth (0.58±0.13 m) and maximum width (6.00±2.35 m). The measured data are then compared with those provided by the Foster and Lane model (1986). The model generated results with considerable scatter. This is possibly due to uncertainties in the field parameters, which are neglected in the deterministic approach of most physically-based models

  4. Soil erosion fragility assessment using an impact model and geographic information system

    OpenAIRE

    Jorge,Luiz Alberto Blanco

    2009-01-01

    A study was taken in a 1566 ha watershed situated in the Capivara River basin, municipality of Botucatu, São Paulo State, Brazil. This environment is fragile and can be subjected to different forms of negative impacts, among them soil erosion by water. The main objective of the research was to develop a methodology for the assessment of soil erosion fragility at the various different watershed positions, using the geographic information system ILWIS version 3.3 for Windows. An impact model wa...

  5. Scaling forecast models for wind turbulence and wind turbine power intermittency

    Science.gov (United States)

    Duran Medina, Olmo; Schmitt, Francois G.; Calif, Rudy

    2017-04-01

    The intermittency of the wind turbine power remains an important issue for the massive development of this renewable energy. The energy peaks injected in the electric grid produce difficulties in the energy distribution management. Hence, a correct forecast of the wind power in the short and middle term is needed due to the high unpredictability of the intermittency phenomenon. We consider a statistical approach through the analysis and characterization of stochastic fluctuations. The theoretical framework is the multifractal modelisation of wind velocity fluctuations. Here, we consider three wind turbine data where two possess a direct drive technology. Those turbines are producing energy in real exploitation conditions and allow to test our forecast models of power production at a different time horizons. Two forecast models were developed based on two physical principles observed in the wind and the power time series: the scaling properties on the one hand and the intermittency in the wind power increments on the other. The first tool is related to the intermittency through a multifractal lognormal fit of the power fluctuations. The second tool is based on an analogy of the power scaling properties with a fractional brownian motion. Indeed, an inner long-term memory is found in both time series. Both models show encouraging results since a correct tendency of the signal is respected over different time scales. Those tools are first steps to a search of efficient forecasting approaches for grid adaptation facing the wind energy fluctuations.

  6. Modelling soil erosion risk based on RUSLE-3D using GIS in a ...

    Indian Academy of Sciences (India)

    Soil Survey Division Staff 2003 Soil Survey Manual;. Handbook 18, USDA, Washington DC. Terranova O, Antronico L, Coscarelli R and Iaquinta P. 2009 Soil erosion risk scenarios in the Mediterranean envi- ronment using RUSLE and GIS: An application model for Calabria (southern Italy); Geomorphology 11(3–4).

  7. Analytical model for erosion behaviour of impacted fly-ash particles ...

    Indian Academy of Sciences (India)

    Keywords. Mathematical model; erosion rate; boiler components; fly ash impingement; tensile properties; steel grades. 1. Introduction. In coal-fired power stations, about 20% of the ash produced in the boilers is deposited on the boiler walls, economisers, air-heaters and super-heater tubes. This deposited ash is sub-.

  8. Soil Erosion and Sediment Yield Modelling in the Pra River Basin of ...

    African Journals Online (AJOL)

    kusimi

    are applicable at catchment scale; event based; and continuous models of spatially and temporally distribution (i.e., 2D) (e.g., Amore et al., 2004; Fistikoglu ..... the integration of RUSLE into GIS give a vivid spatial dimension in soil erosion and sediment yield in the Pra Basin. Given the elements and processes prevailing in ...

  9. A geo-information theoretical approach to inductive erosion modelling based on terrain mapping units

    NARCIS (Netherlands)

    Suryana, N.

    1997-01-01

    Three main aspects of the research, namely the concept of object orientation, the development of an Inductive Erosion Model (IEM) and the development of a framework for handling uncertainty in the data or information resulting from a GIS are interwoven in this thesis. The first and the second aspect

  10. How to diagnose rheumatoid arthritis early: a prediction model for persistent (erosive) arthritis

    NARCIS (Netherlands)

    Visser, Henk; le Cessie, Saskia; Vos, Koen; Breedveld, Ferdinand C.; Hazes, Johanna M. W.

    2002-01-01

    To develop a clinical model for the prediction, at the first visit, of 3 forms of arthritis outcome: self-limiting, persistent nonerosive, and persistent erosive arthritis. A standardized diagnostic evaluation was performed on 524 consecutive, newly referred patients with early arthritis.

  11. Soil erosion model predictions using parent material/soil texture-based parameters compared to using site-specific parameters

    Science.gov (United States)

    R. B. Foltz; W. J. Elliot; N. S. Wagenbrenner

    2011-01-01

    Forested areas disturbed by access roads produce large amounts of sediment. One method to predict erosion and, hence, manage forest roads is the use of physically based soil erosion models. A perceived advantage of a physically based model is that it can be parameterized at one location and applied at another location with similar soil texture or geological parent...

  12. Application of experimental soil erosion models (USLE, RUSLE) in Jordan: A review

    Science.gov (United States)

    Ramzi, A. A.; Ayu, A. W.; Mohm, A. A.; Fahmi, R. M.; Ibrahim, O. M.

    2017-09-01

    In most of the existing models designed for the soil erosion experiment are moderately simplistic, which consistently, have been extensively practiced in many parts of the world. In reality, within the content of this study, the practical occurrences of the Universal Soil Loss Equation (USLE) and that of the Revised Universal Soil Loss Equation (RUSLE) in Jordan were explored. This is obvious as RUSLE portrayed a product adaptation of a significantly enhanced USLE. In Jordan, various research accomplishments were made to decide the nearby values of the USLE components, demonstrating its, potential for use outside its birthplace nation. Entirely, this study found the soil experimental models stand to be mere demonstrating procedures or structures, instead of being the punctual robotic portrayals of the framework, and that perhaps; make no claim of universal comprehensiveness. In any case, with these identified weaknesses, sub-models were found to be utilized in order to give the best practical gauges of the disintegration of the sheet erosion within the Jordanian context. Most often, the spatial index circulation of the soil misfortune of the USLE is viewed as a valuable model that separate regions of high and low disintegration of the erosion potential. In this case, USLE is more generally known and utilized soil erosion condition on the planet. However, no specific model is ever, generally actualized. Although, the USLE model ended to be a promising instrument, as it gives a dynamic way to deal with foreseeing the misfortune of the soil erosion. This study, notwithstanding, perceives there is still a need to further enhanced a check of the RUSLE and USLE outcomes in Jordan. This study sees, by the virtues of hypothetical assessment and affectability in terms of the investigation performed have obviously demonstrated the benefit of the most adaptable and element structure of RUSLE against the strict exact structures of the USLE. Albeit, an exact model could be

  13. Dynamic wind turbine models in power system simulation tool

    DEFF Research Database (Denmark)

    Hansen, A.; Jauch, Clemens; Soerensen, P.

    The present report describes the dynamic wind turbine models implemented in the power system simulation tool DIgSILENT. The developed models are a part of the results of a national research project, whose overall objective is to create a model database in different simulation tools. The report...... provides a description of the wind turbine modelling, both at a component level and at a system level....

  14. Analysis of Artificial Neural Network in Erosion Modeling: A Case Study of Serang Watershed

    Science.gov (United States)

    Arif, N.; Danoedoro, P.; Hartono

    2017-12-01

    Erosion modeling is an important measuring tool for both land users and decision makers to evaluate land cultivation and thus it is necessary to have a model to represent the actual reality. Erosion models are a complex model because of uncertainty data with different sources and processing procedures. Artificial neural networks can be relied on for complex and non-linear data processing such as erosion data. The main difficulty in artificial neural network training is the determination of the value of each network input parameters, i.e. hidden layer, momentum, learning rate, momentum, and RMS. This study tested the capability of artificial neural network application in the prediction of erosion risk with some input parameters through multiple simulations to get good classification results. The model was implemented in Serang Watershed, Kulonprogo, Yogyakarta which is one of the critical potential watersheds in Indonesia. The simulation results showed the number of iterations that gave a significant effect on the accuracy compared to other parameters. A small number of iterations can produce good accuracy if the combination of other parameters was right. In this case, one hidden layer was sufficient to produce good accuracy. The highest training accuracy achieved in this study was 99.32%, occurred in ANN 14 simulation with combination of network input parameters of 1 HL; LR 0.01; M 0.5; RMS 0.0001, and the number of iterations of 15000. The ANN training accuracy was not influenced by the number of channels, namely input dataset (erosion factors) as well as data dimensions, rather it was determined by changes in network parameters.

  15. Uncertainty of soil erosion modelling using open source high resolution and aggregated DEMs

    Directory of Open Access Journals (Sweden)

    Arun Mondal

    2017-05-01

    Full Text Available Digital Elevation Model (DEM is one of the important parameters for soil erosion assessment. Notable uncertainties are observed in this study while using three high resolution open source DEMs. The Revised Universal Soil Loss Equation (RUSLE model has been applied to analysis the assessment of soil erosion uncertainty using open source DEMs (SRTM, ASTER and CARTOSAT and their increasing grid space (pixel size from the actual. The study area is a part of the Narmada river basin in Madhya Pradesh state, which is located in the central part of India and the area covered 20,558 km2. The actual resolution of DEMs is 30 m and their increasing grid spaces are taken as 90, 150, 210, 270 and 330 m for this study. Vertical accuracy of DEMs has been assessed using actual heights of the sample points that have been taken considering planimetric survey based map (toposheet. Elevations of DEMs are converted to the same vertical datum from WGS 84 to MSL (Mean Sea Level, before the accuracy assessment and modelling. Results indicate that the accuracy of the SRTM DEM with the RMSE of 13.31, 14.51, and 18.19 m in 30, 150 and 330 m resolution respectively, is better than the ASTER and the CARTOSAT DEMs. When the grid space of the DEMs increases, the accuracy of the elevation and calculated soil erosion decreases. This study presents a potential uncertainty introduced by open source high resolution DEMs in the accuracy of the soil erosion assessment models. The research provides an analysis of errors in selecting DEMs using the original and increased grid space for soil erosion modelling.

  16. Statistical moments in modelling of swelling, erosion and drug release of hydrophilic matrix-tablets.

    Science.gov (United States)

    Barmpalexis, P; Kachrimanis, K; Malamataris, S

    2018-04-05

    Statistical moments were evaluated as suitable parameters for describing swelling and erosion processes (along with drug release) in hydrophilic controlled release matrix tablets. The effect of four independent formulation variables, corresponding to the quantity of four polymeric matrix excipients (namely polyethylene glycol, povidone, and two grades of hydroxyl-propylmethyl cellulose) on statistical moments describing swelling (mean swelling time, MST), erosion (mean erosion time, MET) and drug-release (mean dissolution time, MDT) was evaluated with the aid of multi-linear regression (MLR) and artificial neural networks (ANNs) based on a central composite experimental design. Results were compared to conventional model fitting, where the rate of water uptake during swelling (a), the maximum % water uptake (S max ), the time at which S max is achieved (t max ), the constant of apparent matrix-tablet erosion rate (k e ) and the release exponent (n) from Korsmeyer-Peppas drug-release equation were used as model parameters. Fitting to an external validation test set revealed superior prediction efficacy for statistical moments compared to conventional model fitting, while the combination of statistical moments with ANNs presented the most efficient approach (R 2 and RMSEp values of 0.922, 0.833, 0.987 and 0.443, 0.691, 0.173 for MST, MET, and MDT, respectively). Copyright © 2018 Elsevier B.V. All rights reserved.

  17. Modelling of the urban wind profile

    DEFF Research Database (Denmark)

    Gryning, Sven-Erik; Batchvarova, Ekaterina

    2008-01-01

    Analysis of meteorological measurements from tall masts in rural and urban areas show that the height of the boundary layer influences the wind profile even in the lowest hundreds of meters. A parameterization of the wind profile for the entire boundary layer is formulated with emphasis...... on the lowest 200-300 m and presented here. Results are shown from applying the parameterization of the wind profile on independent measurements from an urban experimental campaign that was carried out in Sofia, Bulgaria in 2003....

  18. INFERENCE AND SENSITIVITY IN STOCHASTIC WIND POWER FORECAST MODELS.

    KAUST Repository

    Elkantassi, Soumaya

    2017-10-03

    Reliable forecasting of wind power generation is crucial to optimal control of costs in generation of electricity with respect to the electricity demand. Here, we propose and analyze stochastic wind power forecast models described by parametrized stochastic differential equations, which introduce appropriate fluctuations in numerical forecast outputs. We use an approximate maximum likelihood method to infer the model parameters taking into account the time correlated sets of data. Furthermore, we study the validity and sensitivity of the parameters for each model. We applied our models to Uruguayan wind power production as determined by historical data and corresponding numerical forecasts for the period of March 1 to May 31, 2016.

  19. Computational Modelling of Materials for Wind Turbine Blades: Selected DTU Wind Energy Activities.

    Science.gov (United States)

    Mikkelsen, Lars Pilgaard; Mishnaevsky, Leon

    2017-11-08

    Computational and analytical studies of degradation of wind turbine blade materials at the macro-, micro-, and nanoscale carried out by the modelling team of the Section Composites and Materials Mechanics, Department of Wind Energy, DTU, are reviewed. Examples of the analysis of the microstructural effects on the strength and fatigue life of composites are shown. Computational studies of degradation mechanisms of wind blade composites under tensile and compressive loading are presented. The effect of hybrid and nanoengineered structures on the performance of the composite was studied in computational experiments as well.

  20. Measuring and modelling of the wind on the scale of tall wind turbines

    DEFF Research Database (Denmark)

    Floors, Rogier Ralph

    and the friction velocity had a bias, which were related to the change in surface roughness. A higher-order boundary-layer scheme represented the wind profile of the westerly flow over sea better, while a first-order scheme modelled the flow from the east with low-level jets better. The wind profile shape...... to baroclinity. The variation of the resistance law constants in neutral, baroclinic conditions was approximately the same as in experiments that where assumed to be barotropic; part of the variation was explained by baroclinity showing the importance of including this effect when studying boundary-layer winds....

  1. 137Cs applicability to soil erosion assessment: theoretical and empirical model

    International Nuclear Information System (INIS)

    Andrello, Avacir Casanova

    2004-02-01

    The soil erosion processes acceleration and the increase of soil erosion rates due to anthropogenic perturbation in soil-weather-vegetation equilibrium has influenced in the soil quality and environment. So, the possibility to assess the amplitude and severity of soil erosion impact on the productivity and quality of soil is important so local scale as regional and global scale. Several models have been developed to assess the soil erosion so qualitative as quantitatively. 137 Cs, an anthropogenic radionuclide, have been very used to assess the superficial soil erosion process Empirical and theoretical models were developed on the basis of 137 Cs redistribution as indicative of soil movement by erosive process These models incorporate many parameters that can influence in the soil erosion rates quantification by 137 Cs redistribution. Statistical analysis was realized on the models recommended by IAEA to determinate the influence that each parameter generates in results of the soil redistribution. It was verified that the most important parameter is the 137 Cs redistribution, indicating the necessity of a good determination in the 137 Cs inventory values with a minimum deviation associated with these values. After this, it was associated a 10% deviation in the reference value of 137 Cs inventory and the 5% in the 137 Cs inventory of the sample and was determinate the deviation in results of the soil redistribution calculated by models. The results of soil redistribution was compared to verify if there was difference between the models, but there was not difference in the results determinate by models, unless above 70% of 137 Cs loss. Analyzing three native forests and an area of the undisturbed pasture in the Londrina region, can be verified that the 137 Cs spatial variability in local scale was 15%. Comparing the 137 Cs inventory values determinate in the three native forest with the 137 Cs inventory value determinate in the area of undisturbed pasture in the

  2. Modelling and transient stability of large wind farms

    DEFF Research Database (Denmark)

    Akhmatov, Vladislav; Knudsen, Hans; Nielsen, Arne Hejde

    2003-01-01

    by a physical model of grid-connected windmills. The windmill generators ate conventional induction generators and the wind farm is ac-connected to the power system. Improvements-of short-term voltage stability in case of failure events in the external power system are treated with use of conventional generator...... technology. This subject is treated as a parameter study with respect to the windmill electrical and mechanical parameters and with use of control strategies within the conventional generator technology. Stability improvements on the wind farm side of the connection point lead to significant reduction......The paper is dealing-with modelling and short-term Voltage stability considerations of large wind farms. A physical model of a large offshore wind farm consisting of a large number of windmills is implemented in the dynamic simulation tool PSS/E. Each windmill in the wind farm is represented...

  3. Capacity expansion model of wind power generation based on ELCC

    Science.gov (United States)

    Yuan, Bo; Zong, Jin; Wu, Shengyu

    2018-02-01

    Capacity expansion is an indispensable prerequisite for power system planning and construction. A reasonable, efficient and accurate capacity expansion model (CEM) is crucial to power system planning. In most current CEMs, the capacity of wind power generation is considered as boundary conditions instead of decision variables, which may lead to curtailment or over construction of flexible resource, especially at a high renewable energy penetration scenario. This paper proposed a wind power generation capacity value(CV) calculation method based on effective load-carrying capability, and a CEM that co-optimizes wind power generation and conventional power sources. Wind power generation is considered as decision variable in this model, and the model can accurately reflect the uncertainty nature of wind power.

  4. F-Region Neutral Winds Obtained from the Thermospheric Wind Assimilation Model (TWAM).

    Science.gov (United States)

    Molina, I.; Scherliess, L.; Lomidze, L.

    2017-12-01

    Thermospheric neutral winds play a major role in the transport of energy and momentum in the Earth's upper atmosphere. They are also responsible for changes in the composition of the thermosphere and affect the dynamics and morphology of the ionospheric plasma. However, direct observations of the winds are limited both temporally and spatially, which makes global studies very difficult. On the other hand, ionospheric measurements are relatively easier to make and there is a very good distribution of various instruments worldwide. Data assimilation is a technique that combines information from observations and a physical model. Observed data are assimilated into the model as a constraint for the physical equations that describe the dynamics of the system, which allows estimates of unobserved driving forces, e.g., the neutral wind. The Thermospheric Wind Assimilation Model (TWAM) is a data assimilation model that uses the output of the Global Assimilation of Ionospheric Measurements Full Physics (GAIM-FP) model. GAIM-FP is an ionospheric data assimilation model that is based on an ensemble Kalman filter. The ionosphere and plasmasphere electron density and its associated errors are evolved using a physics-based Ionosphere-Plasmasphere Model which solves the ion and electron continuity and momentum equations numerically. TWAM uses an implicit Kalman filter and combines the magnetic meridional winds from GAIM-FP with the equation of motion of the neutral gas. TWAM also uses information from GAIM-FP about the 3-D electron density and ion diffusion velocities. The output of the model is the global zonal and meridional thermospheric neutral winds at low and mid latitudes. This approach has been successfully used to investigate the climatology of thermospheric neutral winds and the physical mechanisms that drive the Weddell Sea Anomaly. We present the first results of our efforts to develop TWAM to use it to analyze day-to-day quiet time data.

  5. A model of rotationally-sampled wind turbulence for predicting fatigue loads in wind turbines

    Science.gov (United States)

    Spera, David A.

    1995-01-01

    Empirical equations are presented with which to model rotationally-sampled (R-S) turbulence for input to structural-dynamic computer codes and the calculation of wind turbine fatigue loads. These equations are derived from R-S turbulence data which were measured at the vertical-plane array in Clayton, New Mexico. For validation, the equations are applied to the calculation of cyclic flapwise blade loads for the NASA/DOE Mod-2 2.5-MW experimental HAWT's (horizontal-axis wind turbines), and the results compared to measured cyclic loads. Good correlation is achieved, indicating that the R-S turbulence model developed in this study contains the characteristics of the wind which produce many of the fatigue loads sustained by wind turbines. Empirical factors are included which permit the prediction of load levels at specified percentiles of occurrence, which is required for the generation of fatigue load spectra and the prediction of the fatigue lifetime of structures.

  6. Modelling of a chaotic load of wind turbines drivetrain

    Science.gov (United States)

    Bielecki, Andrzej; Barszcz, Tomasz; Wójcik, Mateusz

    2015-03-01

    The purpose of this paper is to present a model of the load of the wind turbine gears for simulation of real, varying operational conditions for modelling of wind turbine vibration. The characteristics of the wind, which generates chaotically varying loads on the drivetrain components generating load in teeth and bearings of gears during torque transfer, are discussed. A generator of variable load of wind turbines drivetrain is proposed. Firstly, the module for generation of wind speed is designed. It is based on the approach in which the wind speed was considered as a time series approximated by the Weierstrass function. Secondly, the rotational speed of the main shaft is proposed as a function of the wind speed value. The function depends on a few parameters that are fitted by using a genetic algorithm. Finally, the model of torque of the main shaft is introduced. This model has been created by using a multi-layer artificial neural network. The results show that the proposed approach yields a very good fit for the experimental data. The fit brings about the proper reproducing of all the aspects of the load that are crucial for causing fatigue and, as a consequence, damaging of gears of the wind turbines.

  7. Wind climate from the regional climate model REMO

    DEFF Research Database (Denmark)

    Larsén, Xiaoli Guo; Mann, Jakob; Berg, Jacob

    2010-01-01

    Selected outputs from simulations with the regional climate model REMO from the Max Planck Institute, Hamburg, Germany were studied in connection with wind energy resource assessment. It was found that the mean wind characteristics based on observations from six mid-latitude stations are well...

  8. Mesoscale to microscale wind farm flow modeling and evaluation

    DEFF Research Database (Denmark)

    Sanz Rodrigo, Javier; Chávez Arroyo, Roberto Aurelio; Moriarty, Patrick

    2017-01-01

    The increasing size of wind turbines, with rotors already spanning more than 150m diameter and hub heights above 100m, requires proper modeling of the atmospheric boundary layer (ABL) from the surface to the free atmosphere. Furthermore, large wind farm arrays create their own boundary layer stru...

  9. Wind Power Curve Modeling in Simple and Complex Terrain

    Energy Technology Data Exchange (ETDEWEB)

    Bulaevskaya, V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wharton, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Irons, Z. [Enel Green Power North America, Andover, MA (United States); Qualley, G. [Pentalum, Colleyville, TX (United States)

    2015-02-09

    Our previous work on wind power curve modeling using statistical models focused on a location with a moderately complex terrain in the Altamont Pass region in northern California (CA). The work described here is the follow-up to that work, but at a location with a simple terrain in northern Oklahoma (OK). The goal of the present analysis was to determine the gain in predictive ability afforded by adding information beyond the hub-height wind speed, such as wind speeds at other heights, as well as other atmospheric variables, to the power prediction model at this new location and compare the results to those obtained at the CA site in the previous study. While we reach some of the same conclusions at both sites, many results reported for the CA site do not hold at the OK site. In particular, using the entire vertical profile of wind speeds improves the accuracy of wind power prediction relative to using the hub-height wind speed alone at both sites. However, in contrast to the CA site, the rotor equivalent wind speed (REWS) performs almost as well as the entire profile at the OK site. Another difference is that at the CA site, adding wind veer as a predictor significantly improved the power prediction accuracy. The same was true for that site when air density was added to the model separately instead of using the standard air density adjustment. At the OK site, these additional variables result in no significant benefit for the prediction accuracy.

  10. Interval forecasts of a novelty hybrid model for wind speeds

    Directory of Open Access Journals (Sweden)

    Shanshan Qin

    2015-11-01

    Full Text Available The utilization of wind energy, as a booming technology in the field of renewable energies, has been highly regarded around the world. Quantification of uncertainties associated with accurate wind speed forecasts is essential for regulating wind power generation and integration. However, it remains difficult work primarily due to the stochastic and nonlinear characteristics of wind speed series. Traditional models for wind speed forecasting mostly focus on generating certain predictive values, which cannot properly handle uncertainties. For quantifying potential uncertainties, a hybrid model constructed by the Cuckoo Search Optimization (CSO-based Back Propagation Neural Network (BPNN is proposed to establish wind speed interval forecasts (IFs by estimating the lower and upper bounds. The quality of IFs is assessed quantitatively using IFs coverage probability (IFCP and IFs normalized average width (IFNAW. Moreover, to assess the overall quality of IFs comprehensively, a tradeoff between informativeness (IFNAW and validity (IFCP of IFs is examined by coverage width-based criteria (CWC. As an applicative study, wind speeds from the Xinjiang Region in China are used to validate the proposed hybrid model. The results demonstrate that the proposed model can construct higher quality IFs for short-term wind speed forecasts.

  11. A Combined Reliability Model of VSC-HVDC Connected Offshore Wind Farms Considering Wind Speed Correlation

    DEFF Research Database (Denmark)

    Guo, Yifei; Gao, Houlei; Wu, Qiuwei

    2017-01-01

    and WTGs outage. The wind speed correlation between different WFs is included in the two-dimensional multistate WF model by using an improved k-means clustering method. Then, the entire system with two WFs and a threeterminal VSC-HVDC system is modeled as a multi-state generation unit. The proposed model...

  12. Wind model for low frequency power fluctuations in offshore wind farms

    DEFF Research Database (Denmark)

    Vigueras-Rodríguez, A.; Sørensen, Poul Ejnar; Cutululis, Nicolaos Antonio

    2010-01-01

    of hours, taking into account the spectral correlation between different wind turbines. The modelling is supported by measurements from two large wind farms, namely Nysted and Horns Rev. Measurements from individual wind turbines and meteorological masts are used. Finally, the models are integrated...... into an aggregated model which is used for estimating some electrical parameters as power ramps and reserves requirements, showing a quite good agreement between simulations and measurement. The comparison with measurements generally show that the inclusion of the correlation between low frequency components...... is an improvement, but the effect is relatively small. The effect of including the low frequency components in the model is much more significant. Therefore, that aggregated model is useful in the power system planning and operation, e.g. regarding load following and regulation. Copyright © 2009 John Wiley & Sons...

  13. An assessment of wind forcing impact on a spectral wave model for ...

    Indian Academy of Sciences (India)

    The focus of the present study is the assessment of the impact of wind forcing on the spectral wave model MIKE 21 SW in the Indian Ocean region. Three different wind fields, namely the ECMWF analyzed winds, the ECMWF blended winds, and the NCEP blended winds have been used to drive the model. The wave model ...

  14. Does introduced fauna influence soil erosion? A field and modelling assessment.

    Science.gov (United States)

    Hancock, G R; Lowry, J B C; Dever, C; Braggins, M

    2015-06-15

    Pigs (Sus scrofa) are recognised as having significant ecological impacts in many areas of the world including northern Australia. The full consequences of the introduction of pigs are difficult to quantify as the impacts may only be detected over the long-term and there is a lack of quantitative information on the impacts of feral pigs globally. In this study the effect of feral pigs is quantified in an undisturbed catchment in the monsoonal tropics of northern Australia. Over a three-year period, field data showed that the areal extent of pig disturbance ranged from 0.3-3.3% of the survey area. The mass of material exhumed through these activities ranged from 4.3 t ha(-1) yr(-1) to 36.0 t ha(-1) yr(-1). The findings demonstrate that large introduced species such as feral pigs are disturbing large areas as well as exhuming considerable volumes of soil. A numerical landscape evolution and soil erosion model was used to assess the effect of this disturbance on catchment scale erosion rates. The modelling demonstrated that simulated pig disturbance in previously undisturbed areas produced lower erosion rates compared to those areas which had not been impacted by pigs. This is attributed to the pig disturbance increasing surface roughness and trapping sediment. This suggests that in this specific environment, disturbance by pigs does not enhance erosion. However, this conclusion is prefaced by two important caveats. First, the long term impact of soil disturbance is still very uncertain. Secondly, modelling results show a clear differentiation between those from an undisturbed environment and those from a post-mining landscape, in which pig disturbance may enhance erosion. Copyright © 2015. Published by Elsevier B.V.

  15. Field data vs. modeling: influence of erosion on pyroclastic flow mobility

    Science.gov (United States)

    Bernard, Julien; Kelfoun, Karim; Le Pennec, Jean-Luc

    2013-04-01

    Studies of pyroclastic flow deposits on numerous volcanoes around the world (eg. Merapi, Ngauruhe, Lascar) strongly suggest that erosion processes occur during the flow emplacement itself. This incorporation of accidental material into a moving flow can dramatically modify its properties, such as mobility and velocity, and has to be taken into account for hazard assessment. In order to address this issue, we carried out fieldwork on pyroclastic density current (PDC) deposits from the 2006 paroxysm of Tungurahua volcano, Ecuador. We identified where the deposition from these PDCs began, in one of the gullies affected by the flows (the "Juive"). We then performed precise granulometric and componentry analysis using a series of six high resolution numerical images taken of outcrops from the upper, initial point of deposition through to the lower spreading zone of PDC deposits. Our preliminary results, extracted from 2D data, allow us to precisely quantify the proportions of both juvenile and accidental material in the deposits along the entire gully. We found constant proportions of accidental material -around 40 percent- in all of our samples, showing that erosion mainly occurs before deposition, on the upper slopes (>30°) of the volcano. We wrote theoretical equations to explore the effect of erosion on pyroclastic flow mobility. These equations are based on the balance of forces applied to a single particle of an erodible bed. We defined the time needed by a particle to leave its position in an eroded zone, allowing the erosion to subsequently remove lower particles from the substratum. Both Coulomb and Plastic rheology were investigated for the PDC. The resulting equations were integrated into a VolcFlow-based numerical model, and 2D simulations were performed on Tungurahua volcano, in the gully where the field data were collected. Comparisons between modeled flows and field data are very promising: modeled erosion only occurs on steep slopes, which is consistent

  16. Erosion and Errors

    NARCIS (Netherlands)

    Huisman, H.; Heeres, Glenn; Os, van Bertil; Derickx, Willem; Schoorl, J.M.

    2016-01-01

    Slope soil erosion is one of the main threats to archaeological sites. Several methods were applied to establish the erosion rates at archaeological sites. Digital elevation models (DEMs) from three different dates were used. We compared the elevations from these three models to estimate erosion. We

  17. Evaluating winds and vertical wind shear from Weather Research and Forecasting model forecasts using seven planetary boundary layer schemes

    DEFF Research Database (Denmark)

    Draxl, Caroline; Hahmann, Andrea N.; Pena Diaz, Alfredo

    2014-01-01

    with different PBL parameterizations at one coastal site over western Denmark. The evaluation focuses on determining which PBL parameterization performs best for wind energy forecasting, and presenting a validation methodology that takes into account wind speed at different heights. Winds speeds at heights...... regarding wind energy at these levels partly depends on the formulation and implementation of planetary boundary layer (PBL) parameterizations in these models. This study evaluates wind speeds and vertical wind shears simulated by theWeather Research and Forecasting model using seven sets of simulations...

  18. A noise generation and propagation model for large wind farms

    DEFF Research Database (Denmark)

    Bertagnolio, Franck

    2016-01-01

    A wind turbine noise calculation model is combined with a ray tracing method in order to estimate wind farm noise in its surrounding assuming an arbitrary topography. The wind turbine noise model is used to generate noise spectra for which each turbine is approximated as a point source. However......, the detailed three-dimensional directivity features are taken into account for the further calculation of noise propagation over the surrounding terrain. An arbitrary number of turbines constituting a wind farm can be spatially distributed. The noise from each individual turbine is propagated into the far......-field using the ray tracing method. These results are added up assuming the noise from each turbine is uncorrelated. The methodology permits to estimate a wind farm noise map over the surrounding terrain in a reasonable amount of computational time on a personal computer....

  19. Modelling erosion damage from low-energy plasma gun simulations of disruptions

    International Nuclear Information System (INIS)

    Ehst, D.A.; Hassanein, A.

    1993-10-01

    Energy transfer to material surfaces is dominated by photon radiation through low temperature plasma vapors if tokamak disruptions are due to low kinetic energy particles (approx-lt 100 eV). Simple models of radiation transport are derived and incorporated into a fast-running computer routine to model this process. The results of simulations are in good agreement with plasma gun erosion tests on several metal targets

  20. Reaction-Diffusion Degradation Model for Delayed Erosion of Cross-Linked Polyanhydride Biomaterials

    OpenAIRE

    Domanskyi, Sergii; Poetz, Katie L.; Shipp, Devon A.; Privman, Vladimir

    2015-01-01

    We develop a theoretical model to explain the long induction interval of water intake that precedes the onset of erosion due to degradation caused by hydrolysis in the recently synthesized and studied cross-linked polyanhydrides. Various kinetic mechanisms are incorporated in the model in an attempt to explain the experimental data for the mass loss profile. Our key finding is that the observed long induction interval is attributable to the nonlinear dependence of the degradation rate constan...

  1. Soil Erosion. LC Science Tracer Bullet.

    Science.gov (United States)

    Buydos, John F., Comp.

    Soil erosion is the detachment and movement of topsoil or soil material from the upper part of the soil profile. It may occur in the form of rill, gully, sheet, or wind erosion. Agents of erosion may be water, wind, glacial ice, agricultural implements, machinery, and animals. Soil conservation measures require a thorough understanding of the…

  2. IEA-Task 31 WAKEBENCH: Towards a protocol for wind farm flow model evaluation. Part 2: Wind farm wake models

    DEFF Research Database (Denmark)

    Moriarty, Patrick; Rodrigo, Javier Sanz; Gancarski, Pawel

    2014-01-01

    .windbench.net). This paper provides an overview of the building-block validation approach applied to wind farm wake models, including best practices for the benchmarking and data processing procedures for validation datasets from wind farm SCADA and meteorological databases. A hierarchy of test cases has been proposed...

  3. Model predictive control of wind energy conversion systems

    CERN Document Server

    Yaramasu, Venkata Narasimha R

    2017-01-01

    The authors provide a comprehensive analysis on the model predictive control of power converters employed in a wide variety of variable-speed wind energy conversion systems (WECS). The contents of this book includes an overview of wind energy system configurations, power converters for variable-speed WECS, digital control techniques, MPC, modeling of power converters and wind generators for MPC design. Other topics include the mapping of continuous-time models to discrete-time models by various exact, approximate, and quasi-exact discretization methods, modeling and control of wind turbine grid-side two-level and multilevel voltage source converters. The authors also focus on the MPC of several power converter configurations for full variable-speed permanent magnet synchronous generator based WECS, squirrel-cage induction generator based WECS, and semi-variable-speed doubly fed induction generator based WECS.

  4. Wall correction model for wind tunnels with open test section

    DEFF Research Database (Denmark)

    Sørensen, Jens Nørkær; Shen, Wen Zhong; Mikkelsen, Robert Flemming

    2006-01-01

    In the paper we present a correction model for wall interference on rotors of wind turbines or propellers in wind tunnels. The model, which is based on a one-dimensional momentum approach, is validated against results from CFD computations using a generalized actuator disc principle. In the model...... the exchange of axial momentum between the tunnel and the ambient room is represented by a simple formula, derived from actuator disc computations. The correction model is validated against Navier-Stokes computations of the flow about a wind turbine rotor. Generally, the corrections from the model are in very...... good agreement with the CFD computations, demonstrating that one-dimensional momentum theory is a reliable way of predicting corrections for wall interference in wind tunnels with closed as well as open cross sections....

  5. Robust Model Predictive Control of a Wind Turbine

    DEFF Research Database (Denmark)

    Mirzaei, Mahmood; Poulsen, Niels Kjølstad; Niemann, Hans Henrik

    2012-01-01

    , a new sensor is introduced in the EKF to give faster estimations. Wind speed estimation error is used to assess uncertainties in the linearized model. Significant uncertainties are considered to be in the gain of the system (B matrix of the state space model). Therefore this special structure......In this work the problem of robust model predictive control (robust MPC) of a wind turbine in the full load region is considered. A minimax robust MPC approach is used to tackle the problem. Nonlinear dynamics of the wind turbine are derived by combining blade element momentum (BEM) theory...... and first principle modeling of the turbine flexible structure. Thereafter the nonlinear model is linearized using Taylor series expansion around system operating points. Operating points are determined by effective wind speed and an extended Kalman filter (EKF) is employed to estimate this. In addition...

  6. Error analysis of short term wind power prediction models

    International Nuclear Information System (INIS)

    De Giorgi, Maria Grazia; Ficarella, Antonio; Tarantino, Marco

    2011-01-01

    The integration of wind farms in power networks has become an important problem. This is because the electricity produced cannot be preserved because of the high cost of storage and electricity production must follow market demand. Short-long-range wind forecasting over different lengths/periods of time is becoming an important process for the management of wind farms. Time series modelling of wind speeds is based upon the valid assumption that all the causative factors are implicitly accounted for in the sequence of occurrence of the process itself. Hence time series modelling is equivalent to physical modelling. Auto Regressive Moving Average (ARMA) models, which perform a linear mapping between inputs and outputs, and Artificial Neural Networks (ANNs) and Adaptive Neuro-Fuzzy Inference Systems (ANFIS), which perform a non-linear mapping, provide a robust approach to wind power prediction. In this work, these models are developed in order to forecast power production of a wind farm with three wind turbines, using real load data and comparing different time prediction periods. This comparative analysis takes in the first time, various forecasting methods, time horizons and a deep performance analysis focused upon the normalised mean error and the statistical distribution hereof in order to evaluate error distribution within a narrower curve and therefore forecasting methods whereby it is more improbable to make errors in prediction. (author)

  7. On Practical tuning of Model Uncertainty in Wind Turbine Model Predictive Control

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Hovgaard, Tobias

    2015-01-01

    model of a wind turbine. In this paper, we investigate the impact of this approach on the performance of a wind turbine. In particular, we focus on the most non-linear operational ranges of a wind turbine. The MPC controller is designed for, tested, and evaluated at an industrial high fidelity wind......Model predictive control (MPC) has in previous works been applied on wind turbines with promising results. These results apply linear MPC, i.e., linear models linearized at different operational points depending on the wind speed. The linearized models are derived from a nonlinear first principles...... parameters in the linearized model to fit the actual physical wind turbine behavior. We evaluate the MPC with the different model parameters, and show that, e.g., over-speed events are avoided, and a good performance of the wind turbine control is obtained....

  8. Erosion of Earthen Levees by Wave Action

    Science.gov (United States)

    Ozeren, Y.; Wren, D. G.; Reba, M. L.

    2016-02-01

    Earthen levees of aquaculture and irrigation reservoirs in the United States often experience significant erosion due to wind-generated waves. Typically constructed using local soils, unprotected levees are subjected to rapid erosion and retreat due to wind generated waves and surface runoff. Only a limited amount of published work addresses the erosion rates for unprotected levees, and producers who rely on irrigation reservoirs need an economic basis for selecting a protection method for vulnerable levees. This, in turn, means that a relationship between wave energy and erosion of cohesive soils is needed. In this study, laboratory experiments were carried out in order to quantify wave induced levee erosion and retreat. A model erodible bank was packed using a soil consisting of approximately 14% sand, 73% silt, and 13% clay in a 20.6 m long 0.7 m wide and 1.2 m deep wave tank at the USDA-ARS, National Sedimentation Laboratory in Oxford MS. The geometry of the levee face was monitored by digital camera and the waves were measured by means of 6 capacitance wave staffs. Relationships were established between levee erosion, edge and retreat rates, and incident wave energy.

  9. Two-dimensional time dependent hurricane overwash and erosion modeling at Santa Rosa Island

    Science.gov (United States)

    McCall, R.T.; Van Theil de Vries, J. S. M.; Plant, N.G.; Van Dongeren, A. R.; Roelvink, J.A.; Thompson, D.M.; Reniers, A.J.H.M.

    2010-01-01

    A 2DH numerical, model which is capable of computing nearshore circulation and morphodynamics, including dune erosion, breaching and overwash, is used to simulate overwash caused by Hurricane Ivan (2004) on a barrier island. The model is forced using parametric wave and surge time series based on field data and large-scale numerical model results. The model predicted beach face and dune erosion reasonably well as well as the development of washover fans. Furthermore, the model demonstrated considerable quantitative skill (upwards of 66% of variance explained, maximum bias - 0.21 m) in hindcasting the post-storm shape and elevation of the subaerial barrier island when a sheet flow sediment transport limiter was applied. The prediction skill ranged between 0.66 and 0.77 in a series of sensitivity tests in which several hydraulic forcing parameters were varied. The sensitivity studies showed that the variations in the incident wave height and wave period affected the entire simulated island morphology while variations in the surge level gradient between the ocean and back barrier bay affected the amount of deposition on the back barrier and in the back barrier bay. The model sensitivity to the sheet flow sediment transport limiter, which served as a proxy for unknown factors controlling the resistance to erosion, was significantly greater than the sensitivity to the hydraulic forcing parameters. If no limiter was applied the simulated morphological response of the barrier island was an order of magnitude greater than the measured morphological response.

  10. National Acid Precipitation Assessment Program (NAPAP) county-level alkaline emission estimates for unpaved roads. Dust Devils and wind erosion, 1985 (for microcomputers). Data file

    Energy Technology Data Exchange (ETDEWEB)

    Masser, C.C.; Barnard, W.R.

    1990-01-01

    The two floppy diskettes contain the data summary tables included in Appendices A, B, and C of the report Development of County-Level Wind Erosion and Unpaved Road Alkaline Emission Estimates for the 1985 NAPAP Emissions Inventory. The data tables are formatted in LOTUS 1-2-3 version 2.01 format (although they were written using Microsoft EXCEL Version 2.1). Each of the files represent one of the Appendices. It should be noted that in the report, only counties that had non-zero Dust Devil emissions were included in Appendix C. The corresponding file provides information for all counties in the continental U.S. even though most counties have Dust Devil emissions equal to zero.

  11. Modeling Coastal Erosion, Passive Inundation, and Dynamic Wave Inundation under Higher Sea Level in Hawaii

    Science.gov (United States)

    Anderson, T. R.

    2015-12-01

    Hawaii State legislators recently formed the Interagency Committee on Climate Adaptation to investigate community vulnerability to sea level rise. We developed modeling to provide the committee with assessments of exposure to coastal erosion, wave inundation, and passive flooding based on the IPCC RCP 8.5 model of sea level rise over the 21st Century. We model the exposure to coastal erosion using a hybrid equilibrium profile model (Anderson et al., 2015) that combines historical rates of shoreline change with a Bruun-type model of beach profile translation. Results are mapped in a GIS showing the 80th percentile probability of potential erosion at years 2030, 2050, 2075, and 2100. Wave inundation is modeled using XBeach. We use a 3 m significant wave height to represent a seasonal high swell event. A separate simulation was run for each heightened sea level (corresponding to the years previously mentioned); which accounts for changes in wave dynamics due to the change in water level over the reef platform. We use a bare earth topo/bathy LiDAR DEM derived from data collected during the 2013 JBLTX survey of the Hawaiian Islands. XBeach modeling is done along one-dimensional profiles spaced 20 m apart. From this, we develop a gridded product of water depth and velocity for use in a vulnerability analysis. Passive inundation due to sea level rise, the so-called "bath tub" method, provide estimates of storm drain flooding and groundwater inundation. Our analysis of these three impacts of sea level rise, combined - coastal erosion, wave inundation, and passive flooding - are used with other available data in the FEMA Hazus software to estimate exposure and loss of upland assets.

  12. Combining fire and erosion modeling to target forest management activities

    Science.gov (United States)

    William J. Elliot; Mary Ellen Miller; Nic Enstice

    2015-01-01

    Forests deliver a number of important ecosystem services including clean water. When forests are disturbed by wildfire, the timing, quantity and quality of runoff are altered. A modeling study was carried out in a forested watershed in California to determine the risk of wildfire, and the potential post-fire sediment delivery from approximately 6-ha hillslope polygons...

  13. Targeting forest management through fire and erosion modeling

    Science.gov (United States)

    William J. Elliot; Mary Ellen Miller; Nic Enstice

    2016-01-01

    Forests deliver a number of important ecosystem services, including clean water. When forests are disturbed by wildfire, the timing, quantity and quality of runoff are altered. A modelling study was conducted in a forested watershed in California, USA, to determine the risk of wildfire, and the potential post-fire sediment delivery from ~4-ha hillslope polygons within...

  14. Modelling wind forced bedforms on a sandy beach

    NARCIS (Netherlands)

    de Vries, S.; Van Thiel de Vries, J.; Ruessink, B.G.

    2013-01-01

    This paper aims to conceptually simulate observed spatial and temporal variability in aeolian sediment transport rates, erosion and deposition on a beach. Traditional strategies of modeling aeolian sediment transport rates do not account for supply limitations that are common on natural beaches. A

  15. Experimental investigation of impinging jet erosion on model cohesive granular materials

    Directory of Open Access Journals (Sweden)

    Brunier-Coulin Florian

    2017-01-01

    Full Text Available Erosion of soils affects both natural landscapes and engineering constructions as embankment dams or levees. Improving the safety of such earthen structures requires in particular finding out more about the elementary mechanisms involved in soil erosion. Towards this end, an experimental work was undertaken in three steps. First, several model materials were developed, made of grains (mostly glass beads with solid bridges at particle contacts whose mechanical yield strength can be continuously varied. Furthermore, for most of them, we succeeded in obtaining a translucent system for the purpose of direct visualization. Second, these materials were tested against surface erosion by an impinging jet to determine a critical shear stress and a kinetic coefficient [2, 3]. Note that an adapted device based on optical techniques (combination of Refractive Index Matching and Planar Laser Induced Fluorescence [3] was used specifically for the transparent media. Third, some specifically developed mechanical tests, and particularly traction tests, were implemented to estimate the mechanical strength of the solid bridges both at micro-scale (single contact and at macro-scale (sample and to investigate a supposed relationship with soil resistance to erosion.

  16. SUNSPOT AND STARSPOT LIFETIMES IN A TURBULENT EROSION MODEL

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko, Yuri E. [Department of Mathematics, University of Waikato, P. B. 3105, Hamilton (New Zealand); Wheatland, M. S. [Sydney Institute for Astronomy, School of Physics, The University of Sydney, NSW 2006 (Australia)

    2017-01-10

    Quantitative models of sunspot and starspot decay predict the timescale of magnetic diffusion and may yield important constraints in stellar dynamo models. Motivated by recent measurements of starspot lifetimes, we investigate the disintegration of a magnetic flux tube by nonlinear diffusion. Previous theoretical studies are extended by considering two physically motivated functional forms for the nonlinear diffusion coefficient D : an inverse power-law dependence D ∝ B {sup −ν} and a step-function dependence of D on the magnetic field magnitude B . Analytical self-similar solutions are presented for the power-law case, including solutions exhibiting “super fast” diffusion. For the step-function case, the heat-balance integral method yields approximate solutions, valid for moderately suppressed diffusion in the spot. The accuracy of the resulting solutions is confirmed numerically, using a method which provides an accurate description of long-time evolution by imposing boundary conditions at infinite distance from the spot. The new models may allow insight into the differences and similarities between sunspots and starspots.

  17. Applying a process based erosion model to assess off-site effects of soil erosion from the regional scale to the measure level

    Science.gov (United States)

    Schindewolf, Marcus; Arevalo, Annika; Saathoff, Ulfert; Käpermann, Philipp; Schmidt, Jürgen

    2013-04-01

    Since soil erosion is one of the most important issues of global soil degradation, great effort was put into the application of erosion models for the assessment and prevention of on-site damages. Beside the primary impact of soil loss in decreasing soil fertility, erosion can cause significant impacts if transported sediments are entering downslope ecosystems, settlements, infrastructure or traffic routes. These off-site damages can be very costly, affect a lot of people and contaminate water-resources. The analysis of these problems is intensified by the requirements of new legislation, such as the EU Water Framework Directive (WFD), providing new challenges for planning authorities in order to combat off-site damage. Hence there is strong public and scientific interest in understanding the processes of sediment as well as particle attached nutrient and pollutant transport. Predicting the frequency, magnitude and extent of off-site impacts of water erosion is a necessary precondition for adequate risk assessments and mitigation measures. Process based models are increasingly used for the simulation of soil erosion. Regarding the requirements of the WFD, these models need to deliver comparable estimates from the regional scale to the level of mitigation measures. This study aims on the application of the process based model EROSION 3D for off-site risk assessment on different scales for the German federal state of Saxony using available geo data, data base applications and GIS-routines. Following issues were investigated: - Where are the expected sediment deposition areas? - Which settlements, infrastructures and traffic routes are affected by sediment fluxes? - Which river sections are affected by sediment inputs? - Which river sections are affected by nutrient and heavy metal inputs? The model results identify the Saxon loess belt as highly endangered by off-site damages although hotspots can be found in the northern flatlands and the southern mountain range as

  18. Wind-wave modelling aspects within complicate topography

    Directory of Open Access Journals (Sweden)

    S. Christopoulos

    Full Text Available Wave forecasting aspects for basins with complicate geomorphology, such as the Aegean Sea, are investigated through an intercomparison study. The efficiency of the available wind models (ECMWF, UKMO to reproduce wind patterns over special basins, as well as three wave models incorporating different physics and characteristics (WAM, AUT, WACCAS, are tested for selected storm cases representing the typical wind situations over the basin. From the wave results, discussed in terms of time-series and statistical parameters, the crucial role is pointed out of the wind resolution and the reliability of the different wave models to estimate the wave climate in such a basin. The necessary grid resolution is also tested, while for a specific test case (December 1991 ERS-1 satellite data are compared with those of the model.

  19. Engineering models for merging wakes in wind farm optimization applications

    DEFF Research Database (Denmark)

    Machefaux, Ewan; Larsen, Gunner Chr.; Murcia Leon, Juan Pablo

    2015-01-01

    The present paper deals with validation of 4 different engineering wake superposition approaches against detailed CFD simulations and covering different turbine interspacing, ambient turbulence intensities and mean wind speeds. The first engineering model is a simple linear superposition of wake ...

  20. Quantitative analysis of a wind energy conversion model

    International Nuclear Information System (INIS)

    Zucker, Florian; Gräbner, Anna; Strunz, Andreas; Meyn, Jan-Peter

    2015-01-01

    A rotor of 12 cm diameter is attached to a precision electric motor, used as a generator, to make a model wind turbine. Output power of the generator is measured in a wind tunnel with up to 15 m s −1 air velocity. The maximum power is 3.4 W, the power conversion factor from kinetic to electric energy is c p = 0.15. The v 3 power law is confirmed. The model illustrates several technically important features of industrial wind turbines quantitatively. (paper)