WorldWideScience

Sample records for wiederaufarbeitungsanlage karlsruhe betriebsgmbh

  1. Status of nuclear data activities at Karlsruhe

    Energy Technology Data Exchange (ETDEWEB)

    Kawano, Toshihiko [Kyushu Univ., Fukuoka (Japan)

    1997-03-01

    This is a brief introduction to nuclear data activity at Karlsruhe Research Center. Some URLs concerned are given. Topics mentioned here are, the FENDL and JEF/EFF project at INR, and measurements of neutron capture cross sections at IK III. (author)

  2. Casa Wächter Karlsruhe Alemania Federal

    Directory of Open Access Journals (Sweden)

    Lehmann, Friedrich

    1979-06-01

    Full Text Available Wächter Residence, Karlsruhe - West Germany The design of this home in Karlsruhe v/as presided over by two basic criteria: function and human scale, carried up to their ultimate consequences. The first criteria had a decisive influence on the roof arrangement, as an extension of the neighboring buildings, and on the selection of construction materials to match the suburban environment where the site is located, not to forget the shaping of Windows and skylights, reflecting the internal functions and providing lighting while protecting the privacy of the interior from the exterior lines of view. The second criteria affects aspects so different from one another as the unexpected but valid room arrangement following a spiral path leading from the entrance to the master bedroom at the other end with the remaining rooms at intermediate levels affording the required degree of privacy; or the arrangement of the mechanical installations, resembling the human backbone; or, finally, the paint finish chosen, pleasing man's taste for ornamentality.

    La realización de esta vivienda, en Karlsruhe, estuvo marcada por dos criterios fundamentales: la funcionalidad y la escala humana, llevadas ambas hasta sus últimas consecuencias. La primera influyó desde la disposición de las cubiertas, como prolongación de las construcciones vecinas, hasta la elección de los materiales constructivos, acordes con el entorno suburbano de la parcela, sin olvidar la configuración de las ventanas y lucernarios que, con sus diferentes formatos, indican el uso del interior, al tiempo que posibilitan la iluminación, protegiendo de las vistas exteriores. La segunda característica afecta a aspectos tan dispares como la original, pero válida, secuencia de habitaciones —según una espiral que, desde la entrada, conduce, en el extremo opuesto, al dormitorio de los padres, quedando las restantes dependencias situadas en los niveles intermedios según su exigencia

  3. Karlsruhe: En route to a superconducting r.f. separator

    CERN Document Server

    1973-01-01

    A superconducting r.f. separator is under construction at Karlsruhe for use at the SPS in the beam-line to the Omega spectrometer. Tests on a section of the first 3 m deflector have given results close to the desired parameters.

  4. Karlsruhe Research Center, Nuclear Safety Research Project (PSF). Annual report 1994; Forschungszentrum Karlsruhe, Projekt Nukleare Sicherheitsforschung. Jahrsbericht 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hueper, R. [ed.

    1995-08-01

    The reactor safety R and D work of the Karlsruhe Research Centre (FZKA) has been part of the Nuclear Safety Research Projet (PSF) since 1990. The present annual report 1994 summarizes the R and D results. The research tasks are coordinated in agreement with internal and external working groups. The contributions to this report correspond to the status of early 1995. An abstract in English precedes each of them, whenever the respective article is written in German. (orig.) [Deutsch] Seit Beginn 1990 sind die F+E-Arbeiten des Forschungszentrum Karlsruhe (FZKA) zur Reaktorsicherheit im Projekt Nukleare Sicherheitsforschung (PSF) zusammengefasst. Der vorliegende Jahresbericht 1994 enthaelt Beitraege zu aktuellen Fragen der Sicherheit von Leichtwasserreaktoren und innovativen Systemen sowie der Umwandlung von minoren Aktiniden. Die konkreten Forschungsthemen und -vorhaben werden mit internen und externen Fachgremien laufend abgestimmt. An den beschriebenen Arbeiten sind die folgenden Institute und Abteilungen des FZKA beteiligt: Institut fuer Materialforschung IMF I, II, III; Institut fuer Neutronenphysik und Reaktortechnik INR; Institut fuer Angewandte Thermo- und Fluiddynamik IATF; Institut fuer Reaktorsicherheit IRS; Hauptabteilung Ingenieurtechnik HIT; Hauptabteilung Versuchstechnik HVT sowie vom KfK beauftragte externe Institutionen. Die einzelnen Beitraege stellen den Stand der Arbeiten zum Fruehjahr 1995 dar und sind entsprechend dem F+E-Programm 1994 numeriert. Den in deutscher Sprache verfassten Beitraege sind Kurzfassungen in englischer Sprache vorangestellt. (orig.)

  5. Detector-related backgrounds in the Karlsruhe Tritium Neutrino Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Leber, Michelle, E-mail: mleber@u.washington.edu [Center for Experimental Nuclear Physics and Astrophysics, University of Washington, Box 354290 Seattle, WA 98195-4290 (United States)

    2011-12-15

    The Karlsruhe Tritium Neutrino Experiment, or KATRIN, is a next generation tritium beta decay experiment to directly measure neutrino mass with an expected sensitivity of 0.2 eV [KATRIN Design Report 2004 see (http://www-ik.fzk.de/{approx}katrin/)]. Neutrino mass does not fit into the Standard Model, and determining this mass may set the scale of new physics. To achieve this level of sensitivity, backgrounds in the experiment must be minimized. A complete Geant4 [Agostinelli S et al. 2003 Nuclear Instr. Methods A 506 250-303 Allison J et al. 2006 IEEE Transactions on Nuclear Science53 No. 1 270-8] simulation of KATRIN's focal plane detector and surrounding region is being developed. These simulations will help guide the design and selection of shielding and detector construction materials to reduce backgrounds from cosmic rays and natural radioactivity.

  6. Inverted Classroom an der Hochschule Karlsruhe - ein nicht quantisierter Flip

    CERN Document Server

    Braun, Isabel; Ritter, Stefan; Vasko, Mikko; Voss, Hans-Peter

    2012-01-01

    When does a course count as 'inverted'? When first faced with a new teaching method, deliberate lectures may want to test it without abandoning the advantages of the established method. Aftes the experiment they have to evaluate additional benefits of the new system for teacher and student. Considering the high workload of lecturers, the help of a third party may be useful to obtain an objective assessment of the results during such a transition. At the University of Applied Sciences 'Hochschule Karlsruhe - Technik und Wirtschaft' in Germany, the SKATING project, funded by the German Federal Ministry of Education and Research (BMBF), offers among other things individual technical and didactic advice. This includes practical help with the development, implementation and testing of innovative lecture formats like the Inverted Classroom Method (also known as flipped class). When Professors at the University stated their interest in this approach, varying teaching projects on its implementation and evaluation wer...

  7. Design and construction of superconducting quadrupole magnets at Karlsruhe

    CERN Document Server

    Arendt, F; Turowski, P

    1977-01-01

    Two types of superconducting quadrupole magnets have been developed: 6 extremely short doublets with a quadrupole length of nearly 11 cm as beam focusing elements in the Karlsruhe superconducting proton linac; 2 quadrupoles of about 1 m length for use in the hyperon experiments at the CERN SPS. The concept for these quadrupoles is a one current block winding per pole, calculated with respect to minimum field errors. Special mechanical and winding techniques have been developed to get the high geometric accuracy required for such air coils. The short doublets must be operated in persistent current mode with a thermal superconducting switch and a required time constant of tau >10 /sup 4/ hours. The hyperon beam quadrupoles must operate reliably for a long time in an inaccessible concrete shielding. (2 refs).

  8. Tritium operating experience at the tritium laboratory Karlsruhe

    Energy Technology Data Exchange (ETDEWEB)

    Doerr, L.; Bekris, N.; Besserer, U.; Glugla, M.; Hellriegel, W.; Penzhorn, R.D.; Rohrig, H.D.; Schubert, K.; Vollmer, T.; Wendel, J. [Karlsruhe Research Centre, Tritium Laboratory (Germany)

    1998-07-01

    The Tritium Laboratory Karlsruhe began operations with gram amounts of tritium in March 1995. Since then, the experimental facilities CAPRICE and PETRA have been routinely in operation. New experimental activities include the analysis of tritium in first wall materials of fusion devices and the development of methods for the detritiation of graphite and carbon fibre composite tiles. The experience gained with Tritium Retention Systems, with the Tritium Transfer System, with portable uranium getter beds and in this context with tritium accountancy is reported. The incorporation of a new Pd packed column into the Isotope Separation System, the increase in storage capacity of the Tritium Storage System, the improvements of the analytical instrumentation and some repair activities are also described. (authors)

  9. 19 February 2015 - Professor Holger Hanselka President Karlsruhe Institute of Technology Federal Republic of Germany

    CERN Multimedia

    Gadmer, Jean-Claude

    2015-01-01

    visiting the CMS cavern with CMS Collaboration Deputy Spokesperson K. Borras and CMS Collaboration, Team Leader, Karlsruhe Institut fur Technologie T. Muller and signing the Guest book with CERN Director-General R. Heuer. C. Schaefer present throughout.

  10. Drawing the nuclear landscape: 50 years of the Karlsruhe Nuklidkarte; Trazando el paisaje nuclear 50 anos de historia de la Karlsruher Nuklidkarte

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Borge, M. J.; Normand, C.

    2010-07-01

    The map has been Nuklidkarte Karlsruhe nuclei since 1958 the work of thousands of physicists and hundreds of thousands experimental results produced in institutes research worldwide. With excellence as rule, has become over the years a reference the field of nuclear information. (Author) 19 refs.

  11. Analysis of simulated data for the KArlsruhe TRItium Neutrino experiment using Bayesian inference

    DEFF Research Database (Denmark)

    Riis, Anna Sejersen; Hannestad, Steen; Weinheimer, C.

    2011-01-01

    The KATRIN (Karlsruhe Tritium Neutrino) experiment will analyze the tritium β spectrum to determine the mass of the neutrino with a sensitivity of 0.2 eV (90% C.L.). This approach to a measurement of the absolute value of the neutrino mass relies only on the principle of energy conservation and can...

  12. Karlsruhes aastapäeva rohke muusikaga / Meeli Bagger ; fotod: Meeli Bagger

    Index Scriptorium Estoniae

    Bagger, Meeli, 1958-

    2005-01-01

    Eesti Vabariigi 87. aastapäeva tähistamisest 26. veebruaril 2005 Hoepfneri Õllevabriku saalis, korraldajaks Karlsruhe Saksa-Eesti Selts. Kõnega esines Rita Fromm, kontserdil esinesid: Mari-Liis Vihermäe, Triinu Kull, Monika Hausvalter, Mait Martin, Viktoria ja Natalia Zagalskaia

  13. A decade of tritium technology development and operation at the tritium laboratory Karlsruhe

    Energy Technology Data Exchange (ETDEWEB)

    Doerr, L.; Besserer, U.; Bekris, N.; Bornschein, B.; Caldwell-Nichols, C.; Demange, D.; Cristescu, I.; Cristescu, I. R.; Glugla, M.; Hellriegel, G.; Schaefer, P.; Weite, S.; Wendel, J. [Forschungszentrum Karlsruhe, Inst. for Technical Physics, Tritium Laboratory Karlsruhe, P.O. Box 3640, D-76021 Karlsruhe (Germany)

    2008-07-15

    The Tritium Laboratory Karlsruhe (TLK) has been designed to handle relevant amounts of tritium for the development of tritium technology for fusion reactors. This paper describes the tritium technology development and experience gained during the upgrade of facilities, interventions, replacement of failed components and operation of the TLK since its commissioning with tritium in 1994. (authors)

  14. On the mean-field theory of the Karlsruhe Dynamo Experiment

    Directory of Open Access Journals (Sweden)

    K.-H. Rädler

    2002-01-01

    Full Text Available In the Forschungszentrum Karlsruhe an experiment has been constructed which demonstrates a homogeneous dynamo as is expected to exist in the Earth's interior. This experiment is discussed within the framework of mean-field dynamo theory. The main predictions of this theory are explained and compared with the experimental results. Key words. Dynamo, geodynamo, dynamo experiment, mean-field dynamo theory, a-effect

  15. News from the Library: The 8th edition Karlsruhe nuclide chart has been released

    CERN Multimedia

    CERN Library

    2012-01-01

    The 8th edition of the Karlsruhe Nuclide Chart contains new data not found in the 7th edition.   Since 1958, the well-known Karlsruhe Nuclide Chart has provided scientists with structured, valuable information on the half-lives, decay modes and energies of radioactive nuclides. The chart is used in many disciplines in physics (health physics, radiation protection, nuclear and radiochemistry, astrophysics, etc.) but also in the life and earth sciences (biology, medicine, agriculture, geology, etc.). The 8th edition of the Karlsruhe Nuclide Chart contains new data on 737 nuclides not found in the 7th edition. In total, nuclear data on 3847 experimentally observed ground states and isomers are presented. A new web-based version of this chart is in the final stages of development for use within the Nucleonica Nuclear Science Portal - a portal for which CERN has an institutional license. The chart is also available in paper format.   If you want to buy a paper version of the chart, ple...

  16. EL CONGRESO DE KARLSRUHE: PASO DEFINITIVO HACIA LA QUÍMICA MODERNA

    Directory of Open Access Journals (Sweden)

    Ramón Cid Manzano

    2009-01-01

    Full Text Available Estamos celebrando en este año 2009 el 140 aniversario de la publicación de la primera tabla periódica y el 90 aniversario de la creación del IUPAC. Ambos acontecimientos se relacionan directamente con el congreso de Karlsruhe llevado a cabo en esa ciudad alemana en 1860. Este congreso fué convocado para que los químicos europeos pudieran discutir sobre asuntos muy controvertidos, como la naturaleza atómica de la materia, la nomenclatura química y los pesos atómicos. El objetivo de este artículo es proporcionar a los lectores algunos datos sobre este congreso para entender mejor cómo la tabla periódica fue desarrollada y cómo la química se convirtió en una ciencia moderna.

  17. Muusikamaail. "Musica nova" Helsingis. Händeli festival Karlsruhes. Ooperikonkurss algas. Preemiaid ja tunnustusi. Ka Parmas uus ooperimaja. / Priit Kuusk

    Index Scriptorium Estoniae

    Kuusk, Priit, 1938-

    2002-01-01

    Soomes toimuvast uue muusika festivalist. Händeli festivalist Karlsruhes. Üle-euroopalisest noorte ooperilauljate konkursist. Ooperilaulja Doris Soffel sai Rootsi riigilt Kuningliku Põhjatähe ordeni. Sebastian Baumgarten sai ooperi "Tosca" eest noore režissööri preemia. Parmas valmis uus ooperimaja

  18. PREFACE: Selected invited contributions from the International Conference on Magnetism (Karlsruhe, Germany, 26-31 July 2009) Selected invited contributions from the International Conference on Magnetism (Karlsruhe, Germany, 26-31 July 2009)

    Science.gov (United States)

    Goll, Gernot; Löhneysen, Hilbert v.; Loidl, Alois; Pruschke, Thomas; Richter, Manuel; Schultz, Ludwig; Sürgers, Christoph; Wosnitza, Jochen

    2010-04-01

    The International Conference on Magnetism 2009 (ICM 2009) was held in Karlsruhe, Germany, from 26 to 31 July 2009. Previous conferences in this series were organized in Edinburgh, UK (1991), Warsaw, Poland (1994), Cairns, Australia (1997), Recife, Brazil (2000), Rome, Italy (2003), and Kyoto, Japan (2006). As with previous ICM conferences, the annual Conference on Strongly Correlated Electron Systems (SCES) was integrated into ICM 2009. The topics presented at ICM 2009 were strongly correlated electron systems, quantum and classical spin systems, magnetic structures and interactions, magnetization dynamics and micromagnetics, spin-dependent transport, spin electronics, magnetic thin films, particles and nanostructures, soft and hard magnetic materials and their applications, novel materials and device applications, magnetic recording and memories, measuring techniques and instrumentation, as well as interdisciplinary topics. We are grateful to the International Advisory Committee for their help in coordinating an attractive program encompassing practically all aspects of magnetism, both experimentally and theoretically. The Program Committee comprised A Loidl, Germany (Chair), M A Continentino, Brazil, D E Dahlberg, USA, D Givord, France, G Güntherodt, Germany, H Mikeska, Germany, D Kaczorowski, Poland, Ching-Ray Chang, South Korea, I Mertig, Germany, D Vollhardt, Germany, and E F Wassermann, Germany. E F Wassermann was also head of the National Organizing Committee. His help is gratefully acknowledged. The scientific program started on Monday 27 July 2009 with opening addresses by the Conference Chairman, the Deputy Mayor of Karlsruhe, Ms M Mergen and the Chairman of the Executive Board of Forschungszentrum Karlsruhe, E Umbach. ICM 2009 was attended by the Nobel Laureates P W Anderson, A Fert and P Grünberg who gave plenary talks. A special highlight was the presentation of the Magnetism Award and Néel Medal to S S P Parkin who also presented his newest results

  19. Long term evolution of the urban heat island beneath the city of Karlsruhe, Germany

    Science.gov (United States)

    Menberg, Kathrin; Blum, Philipp; Schaffitel, Axel; Bayer, Peter

    2013-04-01

    Increased air and surface temperature in urban areas are a widely spread phenomenon commonly referred to as urban heat islands (UHI). However, changes in the urban environment also lead to increased subsurface temperatures and cause extensive thermal anomalies in shallow urban aquifers. The reasons for this heating are manifold as several possible heat sources exist in the urban subsurface. Previous studies have primarily discussed basements and increased surface temperature as possible cause for heterogeneous groundwater temperature distribution. But also, sewers and district heating networks are likely to influence the temperature of the surrounding subsurface. In this study, the spatial distribution of groundwater temperature in the city Karlsruhe, Germany, is analyzed using a data set from 1977 and recent measurements from 2011. Furthermore, the anthropogenic heat input in the urban groundwater is quantified by a spatially resolved heat flux model. In the latter, several heat transport processes are considered, such as heat flux from basements and sewers, heat loss from district heating networks and heat input due to increased ground surface temperatures (GST) and reinjections of thermal waste water. Uncertainties are accounted for in a Monte Carlo simulation. In order to investigate the long-term evolution of the subsurface thermal regime, we compared the heat fluxes for the years 1977 and 2011. In both years, the spatial distribution of groundwater temperatures exhibits the highest temperatures under the city center and a large industrial site. Compared to 1977 background temperatures in 2011 have increased by approximately 1 K, while the maximum temperature is nearly equal. However, the area of the thermal anomaly has spread notably in the last 30 years. In both years the largest mean heat fluxes occurred from increased GST and basements. The development of the heat flux from increased GST reflects the evolution of surface air temperature (SAT), while the

  20. Report of the Second European Zebrafish Principal Investigator Meeting in Karlsruhe, Germany, March 21-24, 2012.

    Science.gov (United States)

    Cavodeassi, Florencia; Del Bene, Filippo; Fürthauer, Maximilian; Grabher, Clemens; Herzog, Wiebke; Lehtonen, Sanna; Linker, Claudia; Mercader, Nadia; Mikut, Ralf; Norton, William; Strähle, Uwe; Tiso, Natascia; Foulkes, Nicholas S

    2013-03-01

    The second European Zebrafish Principal Investigator (PI) Meeting was held in March, 2012, in Karlsruhe, Germany. It brought together PIs from all over Europe who work with fish models such as zebrafish and medaka to discuss their latest results, as well as to resolve strategic issues faced by this research community. Scientific discussion ranged from the development of new technologies for working with fish models to progress in various fields of research such as injury and repair, disease models, and cell polarity and dynamics. This meeting also marked the establishment of the European Zebrafish Resource Centre (EZRC) at Karlsruhe that in the future will serve as an important focus and community resource for zebrafish- and medaka-based research.

  1. Flue gas cleaning by the electron-beam-process (II): Recent activities at the RDK-7 pilot plant, Karlsruhe

    Science.gov (United States)

    Platzer, K.-H.; Willibald, U.; Gottstein, J.; Tremmel, A.; Angele, H.-J.; Zellner, K.

    At the Badenwerk coal fired 550 MW el unit RDK-7 of the Rheinhafen-Dampfkraftwerk, Karlsruhe, a pilot plant for flue gas cleaning by means of electron excitation is operating since December 1985. The main emphasis during the previous research period was focused upon the demonstration of the technical feasibility of the process. Experiences from long-term test runs at the RDK-7 pilot plant prove that it is possible to achieve a reliable and efficient operation both of the electron beam accelerators and of the baghouse by-product precipitator by combining several optimization steps described in this paper.

  2. Development of a regional concept for energy management for the region of Karlsruhe. Final report; Entwicklung eines regionalen Energiemanagement-Konzeptes und Anwendung auf die TechnologieRegion Karlsruhe. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Rentz, O.; Fichtner, W.; Frank, M. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Industriebetriebslehre und Industrielle Produktion; Wolf, M.A.; Rejman, M.; Eyerer, P. [Fraunhofer-Institut fuer Chemische Technologie (ICT) (Germany); Reimert, R.; Schulz, A.; Buren, V. v. [Karlsruhe Univ. (T.H.) (Germany). Engler-Bunte-Institut Bereich 1 - Gas, Erdoel und Kohle; Schaefers, B.; Bernart, Y. [Karlsruhe Univ. (T.H.) (DE). Institut fuer Soziologie (IfSoz) (Germany)

    2002-09-01

    Major objectives of this project are: to prepare a cross-disciplinary analysis of all characteristic aspects of the energy supply and demand patterns of a group of selected energy-intensive companies in the Karlsruhe and Rhine harbour area (5 industrial power consumers, 1 utility), to identify practical approaches for optimization and integration of energy and material flows, (networking), and to develop optimised investment and energy supply options within the framework of given conditions. The basis of the optimal solution and energy network presented and explained in detail is a new combined-cycle power plant running as a gas-fired CHP plant, substituting about 50% of the systems formerly used. (orig./CB) [German] Fragestellungen der Effizienzsteigerung und der Verwertung von Abfaellen und Abwaerme gewinnen an Relevanz vor dem Hintergrund der begrenzten Aufnahmekapazitaet der Umweltmedien fuer Schadstoffe. Im Rahmen des Projektes wurde am Beispiel der Region Karlsruhe (5 Industrieunternehmen und 1 EVU) die Entwicklung betriebsuebergreifender Energieversorgungssysteme (Netzwerke) interdisziplinaer analysiert und beschrieben. Zielsetzungen des Projekts waren unter anderem: Bestimmung von zukunftsfaehigen Optionen, intelligente Vernetzung von Energiestroemen, wirtschaftliche Optimierung betriebsuebergreifender Energiemanagement-Loesungen. Die optimale vorgestellte Loesung ist charakterisiert durch den Neubau einer zentralen, gasgefeuerten GuD-Anlage, die etwa die Haelfte der bisherigen Anlagen ersetzt und zusammen mit den weiterhin genutzten Anlagen die Energieversorgung der Unternehmen sicherstellt. (orig./CB)

  3. Feedstock recycling of plastics. Selected papers presented at the third International Symposium on Feedstock Recycling of Plastics, Karlsruhe, Sept. 25-29, 2005

    OpenAIRE

    Müller-Hagedorn, Matthias; Bockhorn, Henning [Hrsg.

    2005-01-01

    Feedstock Recycling of Plastics gives a survey of actual fundamental and applied research. It consists of selected contributions that were presented during the Third International Symposium on Feedstock Recycling of Plastics & other Innovative Plastics Recycling Techniques in Karlsruhe (Germany), 2005. The following fundamental issues of feedstock recycling are covered: - Pyrolysis or solvolysis - Pyrolysis: Processes - Strategies - Usages - Modelling - Py...

  4. Vom Klangrausch des Nordwinds und der leeren Tafel der Seele. Lepo Sumeras vierte Symphonie "Serena Borealis" in Karlsruhe uraufgeführt: Eri Klas dirigierte im Konzert der Badischen Staatskapelle zu den Kulturtagen auch Musik von Arvo Pärt und Edua

    Index Scriptorium Estoniae

    Hartmann, Ulrich

    1992-01-01

    Lepo Sumera neljanda sümfoonia "Serena Borealis" esiettekanne Karlsruhes: Eri Klas dirigeeris kontserdil kultuuripäevade raames ka Arvo Pärdi ja Eduard Tubina muusikat. Eesti muusikute esinemisest Karlsruhe kultuuripäevadel

  5. Removal efficiency of silver impregnated filter materials and performance of iodie filters in the off-gas of the Karlsruhe reprocessing plant WAK

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, F.J.; Herrmann, B.; Hoeflich, V. [Wiederaufarbeitungsanlage Karlsruhe (Germany)] [and others

    1997-08-01

    An almost quantitative retention of iodine is required in reprocessing plants. For the iodine removal in the off-gas streams of a reprocessing plant various sorption materials had been tested under realistic conditions in the Karlsruhe reprocessing plant WAK in cooperation with the Karlsruhe research center FZK. The laboratory results achieved with different iodine sorption materials justified long time performance tests in the WAK Plant. Technical iodine filters and sorption materials for measurements of iodine had been tested from 1972 through 1992. This paper gives an overview over the most important results, Extended laboratory, pilot plant, hot cell and plant experiences have been performed concerning the behavior and the distribution of iodine-129 in chemical processing plants. In a conventional reprocessing plant for power reactor fuel, the bulk of iodine-129 and iodine-127 is evolved into the dissolver off-gas. The remainder is dispersed over many aqueous, organic and gaseous process and waste streams of the plant. Iodine filters with silver nitrate impregnated silica were installed in the dissolver off-gas of the Karlsruhe reprocessing plant WAK in 1975 and in two vessel vent systems in 1988. The aim of the Karlsruhe iodine research program was an almost quantitative evolution of the iodine during the dissolution process to remove as much iodine with the solid bed filters as possible. After shut down of the WAK plant in December 1990 the removal efficiency of the iodine filters at low iodine concentrations had been investigated during the following years. 12 refs., 2 figs., 2 tabs.

  6. Comparison of local and regional heat transport processes into the subsurface urban heat island of Karlsruhe, Germany

    Science.gov (United States)

    Benz, Susanne; Bayer, Peter; Menberg, Kathrin; Blum, Philipp

    2014-05-01

    Temperatures in shallow urban ground are typically elevated. They manifest as subsurface urban heat islands, which are observed worldwide in different metropolitan areas and which have a site-specific areal extent and intensity. As of right now the governing heat transport processes accumulating heat in the subsurface of cities are insufficiently understood. Based on a spatial assessment of groundwater temperatures, six individual heat flux processes could be identified: (1) heat flux from elevated ground surface temperatures (GST), (2) heat flux from basements of buildings, (3) reinjection of thermal waste water, (4) sewage drains, (5) sewage leakage, and (6) district heating. In this study, the contributions of these processes are quantified on local and regional scales for the city of Karlsruhe in Germany. For the regional scale, the Regionalized Monte Carlo (RMC) method is used. This method applies a single Monte Carlo (MC) simulation for the entire study area. At relatively low data demand, the RMC method provides basic insights into the heat contribution for the entire city. For the local scale, the Local Monte Carlo (LMC) method was developed and applied. This method analyzes all dominant heat fluxes spatially dependent by performing an MC simulation for each arbitrary sized pixel of the study area (here 10 x 10 m). This more intricate approach allows for a spatial representation of all heat flux processes, which is necessary for the local planning of geothermal energy use. In order to evaluate the heat transport processes on a regional scale, we compared the mean annual thermal energies that result from the individual heat flux processes. Both methods identify the heat flux from elevated GST and the heat flux from buildings as the dominant regional processes. However, reinjection of thermal wastewater is by far the most dominant local heat flux processes with an average heat flux of 16 ± 2 W/m2 in the affected areas. Although being dominant on the regional

  7. Establishing a Research Information System as Part of an Integrated Approach to Information Management: Best Practice at the Karlsruhe Institute of Technology (KIT

    Directory of Open Access Journals (Sweden)

    Frank Scholze

    2012-01-01

    Full Text Available The Karlsruhe Institute of Technology (KIT is one of the largest research and higher education organisations in the world focusing on engineering and natural sciences. At present KIT, under the chairmanship of its executive board, is installing an extensive current research information system (CRIS covering all institutes and facilities of the organisation. The assumption underlying the project is that a consistent overview of research performance has become fundamental for the international competitiveness of research institutions and is increasingly important for strategic decisions at the executive level. Ultimately, it also leads to better data and control in rankings at higher education assessments. The new research information system systematically maps all of KIT’s processes and instruments to obtain, connect, present and utilise the research metadata of active researchers. This reduces the documentation workload for researchers, for the executive level and central units such as the library, and at the same time allows for and facilitates an overall view and the aggregation and visualisation of research metadata. Our vision is to build a federally structured network of systems that gathers information on KIT’s publications, research competence, research projects, patents and technological offers by retrieving data from external and internal sources as well as directly from the researchers. The network facilitates linking and aggregating of data and provides unique identifiers for individual researchers and organizational units. With its consistent data model the research information system also fosters the organisational development of KIT, which was formed in 2009 by the merger of a university and a national research centre. The researchers and their activities are at the core of the research information system. The system substantially reduces their administrative burden in documenting project information and publications. Automatic

  8. ANITA-IEAF activation code package – updating of the decay and cross section data libraries and validation on the experimental data from the Karlsruhe Isochronous Cyclotron

    Directory of Open Access Journals (Sweden)

    Frisoni Manuela

    2017-01-01

    Full Text Available ANITA-IEAF is an activation package (code and libraries developed in the past in ENEA-Bologna in order to assess the activation of materials exposed to neutrons with energies greater than 20 MeV. An updated version of the ANITA-IEAF activation code package has been developed. It is suitable to be applied to the study of the irradiation effects on materials in facilities like the International Fusion Materials Irradiation Facility (IFMIF and the DEMO Oriented Neutron Source (DONES, in which a considerable amount of neutrons with energies above 20 MeV is produced. The present paper summarizes the main characteristics of the updated version of ANITA-IEAF, able to use decay and cross section data based on more recent evaluated nuclear data libraries, i.e. the JEFF-3.1.1 Radioactive Decay Data Library and the EAF-2010 neutron activation cross section library. In this paper the validation effort related to the comparison between the code predictions and the activity measurements obtained from the Karlsruhe Isochronous Cyclotron is presented. In this integral experiment samples of two different steels, SS-316 and F82H, pure vanadium and a vanadium alloy, structural materials of interest in fusion technology, were activated in a neutron spectrum similar to the IFMIF neutron field.

  9. ANITA-IEAF activation code package - updating of the decay and cross section data libraries and validation on the experimental data from the Karlsruhe Isochronous Cyclotron

    Science.gov (United States)

    Frisoni, Manuela

    2017-09-01

    ANITA-IEAF is an activation package (code and libraries) developed in the past in ENEA-Bologna in order to assess the activation of materials exposed to neutrons with energies greater than 20 MeV. An updated version of the ANITA-IEAF activation code package has been developed. It is suitable to be applied to the study of the irradiation effects on materials in facilities like the International Fusion Materials Irradiation Facility (IFMIF) and the DEMO Oriented Neutron Source (DONES), in which a considerable amount of neutrons with energies above 20 MeV is produced. The present paper summarizes the main characteristics of the updated version of ANITA-IEAF, able to use decay and cross section data based on more recent evaluated nuclear data libraries, i.e. the JEFF-3.1.1 Radioactive Decay Data Library and the EAF-2010 neutron activation cross section library. In this paper the validation effort related to the comparison between the code predictions and the activity measurements obtained from the Karlsruhe Isochronous Cyclotron is presented. In this integral experiment samples of two different steels, SS-316 and F82H, pure vanadium and a vanadium alloy, structural materials of interest in fusion technology, were activated in a neutron spectrum similar to the IFMIF neutron field.

  10. Conceptual design of a First Wall mock-up experiment in preparation for the qualification of breeding blanket technologies in the Helium Loop Karlsruhe (HELOKA) facility

    Energy Technology Data Exchange (ETDEWEB)

    Zeile, C., E-mail: christian.zeile@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Abou-Sena, A.; Boccaccini, L.V.; Ghidersa, B.E.; Kang, Q.; Kunze, A. [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Lamberti, L. [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Dipartimento Energia, Politecnico di Torino (Italy); Maione, I.A.; Rey, J.; Weth, A. von der [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2016-11-01

    Highlights: • Experiment in preparation for the qualification of Breeding Blanket technologies in HELOKA facility is proposed. • Experimental capabilities, instrumentation of the mock-up and experimental program are presented. • Design and manufacturing of the mock-up is described. • Design of modular attachment system to obtain different stress levels and distributions on the mock-up is discussed. - Abstract: An experimental program based on a First Wall mock-up is presented as preparation for the qualification of breeding blanket mock-ups at high heat flux in the Helium Loop Karlsruhe (HELOKA) facility. Two objectives of the experimental program have been defined: testing of the experimental setup and a first validation of FE models. The design and manufacturing of mock-up representing about 1/3 of the heated zone of an ITER Test Blanket Module (TBM) First Wall is discussed. A modular attachment system concept has been developed for the fixation of the mock-up in order to be able to generate different stress distributions and levels on the plate, which is confirmed by thermo-mechanical analyses. The HELOKA facility is able to provide a TBM relevant helium cooling system and to generate the required surface heat flux by an electron beam gun. An installed IR camera can be used to measure the temperature distribution on the surface.

  11. Scientists from all over the world attend the ''Frederic Joliot/Otto Hahn Summer School 2009'' at the Karlsruhe Institute of Technology (KIT); Wissenschaftler aus aller Welt bei der ''Frederic Joliot/Otto Hahn Summer School 2009'' am Karlsruhe Institute of Technologie (KIT)

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Espinoza, Victor Hugo; Fischer, Ulrich [Karlsruhe Inst. of Tech. (KIT), Campus Nord/Inst. for Neutron Physics and Reactor Tech. (INR), Eggenstein-Leopoldshafen (Germany)

    2009-11-15

    The ''Frederic Joliot/Otto Hahn Summer School'' is organized each year alternately by the Karlsruhe Institute of Technology and the Commissariat a l'Energie Atomique (CEA), Cadarache. This year's Summer School, the 15th since its foundation, was run at the Advanced Training Center (FTU) of KIT Campus Nord on August 26 to September 4. The key topic this year was ''The Challenges in Implementing Fast Reactor Technology.'' These are the items discussed: Principles and challenges of future fast reactor designs, Fuels, fuel cycle, and recycling of minor actinides, Innovative cladding tube and structural materials, Special aspects of coolants and the challenges they pose, Fast reactor safety. Experts from 8 leading international research establishments and universities presented and discussed with the 58 participants from 16 countries the current state of the art and the latest development trends in the topics listed above. (orig.)

  12. Experience in Remote Demolition of the Activated Biological Shielding of the Multi Purpose Research Reactor (MZFR) on the German Karlsruhe Site - 12208

    Energy Technology Data Exchange (ETDEWEB)

    Eisenmann, Beata; Fleisch, Joachim; Prechtl, Erwin; Suessdorf, Werner; Urban, Manfred [WAK Rueckbau- und Entsorgungs- GmbH, P.O.Box 12 63, 76339 Eggenstein-Leopoldshafen (Germany)

    2012-07-01

    In 2009, WAK Decommissioning and Waste Management GmbH (WAK) became owner and operator of the waste treatment facilities of Karlsruhe Institute of Technology (KIT) as well as of the prototype reactors, the Compact Sodium-Cooled Fast Reactor (KNK) and Multi-Purpose Reactor (MZFR), both being in an advanced stage of dismantling. Together with the dismantling and decontamination activities of the former WAK reprocessing facility since 1990, the envisaged demolishing of the R and D reactor FR2 and a hot cell facility, all governmentally funded nuclear decommissioning projects on the Karlsruhe site are concentrated under the WAK management. The small space typical of prototype research reactors represented a challenge also during the last phase of activated dismantling, dismantling of the activated biological shield of the MZFR. Successful demolition of the biological shield required detailed planning and extensive testing in the years before. In view of the limited space and the ambient dose rate that was too high for manual work, it was required to find a tool carrier system to take up and control various demolition and dismantling tools in a remote manner. The strategy formulated in the concept of dismantling the biological shield by means of a modified electro-hydraulic demolition excavator in an adaptable working scaffolding turned out to be feasible. The following boundary conditions were essential: - Remote exchange of the dismantling and removal tools in smallest space. - Positioning of various supply facilities on the working platform. - Avoiding of interfering edges. - Optimization of mass flow (removal of the dismantled mass from the working area). - Maintenance in the surroundings of the dismantling area (in the controlled area). - Testing and qualification of the facilities and training of the staff. Both the dismantling technique chosen and the proceeding selected proved to be successful. Using various designs of universal cutters developed on the basis of

  13. Modeling Groundwater-Quality Data from In-Situ Mesocosms Using PHREEQC to Provide Insights into the Electron Donors Involved in Denitrification in the Karlsruhe Aquifer, ND

    Science.gov (United States)

    Korom, S. F.; Tesfay, T.

    2009-12-01

    Groundwater nitrate concentrations in the Karlsruhe aquifer in north-central North Dakota increased in the mid-1990s. In response, state regulators developed a remediation plan that included research into the natural denitrifying capabilities of the aquifer, including the analysis of aquifer sediment samples and the installation of a pair of in-situ mesocosms (ISMs) below the water table to study denitrification reactions. Sediment analysis showed concentrations of the potential electron donors ferrous iron, inorganic sulfide, and organic carbon (OC). X-ray diffraction showed the dominant minerals are quartz, plagioclase feldspar, alkali feldspar, calcite, and dolomite, with lesser amounts of ferrous-iron silicates (chlorite, hornblende, biotite) and pyrite. In the ISMs tracer tests were initiated by pumping groundwater from them, amending it with sodium nitrate and sodium bromide (Br was used as a tracer for nitrate), and pumping the amended water back into the ISMs. The large size of the ISMs (> 180 L of aquifer sediments) allowed large samples (> 1 L) to be taken from the ISMs about every two months for over two years. Samples were analyzed for major ions and saturation indices [SI = log (ion activity product/equilibrium constant)] computed. Any loss of nitrate beyond that attributable to dilution, based on the Br tracer, was considered denitrified. Major sulfate minerals were undersaturated in the ISMs; therefore, any increase in sulfate was attributed to the oxidation of pyrite. PHREEQC was used to determine if the remaining nitate lost to denitrification could be explained best by a reaction with ferrous-iron silicate (as grunerite), organic carbon (as CH2O), or a 50/50 stoichiometric mix of both. After each simulation, the modeled groundwater was “equilibrated” with quartz, albite, anorthite, calcite, dolomite, chlorite, and magnesite, such that the modeled groundwater and the actual groundwater had the same SI values for these minerals. Simulated

  14. Development of new auxiliary basis functions of the Karlsruhe segmented contracted basis sets including diffuse basis functions (def2-SVPD, def2-TZVPPD, and def2-QVPPD) for RI-MP2 and RI-CC calculations.

    Science.gov (United States)

    Hellweg, Arnim; Rappoport, Dmitrij

    2015-01-14

    We report optimized auxiliary basis sets for use with the Karlsruhe segmented contracted basis sets including moderately diffuse basis functions (Rappoport and Furche, J. Chem. Phys., 2010, 133, 134105) in resolution-of-the-identity (RI) post-self-consistent field (post-SCF) computations for the elements H-Rn (except lanthanides). The errors of the RI approximation using optimized auxiliary basis sets are analyzed on a comprehensive test set of molecules containing the most common oxidation states of each element and do not exceed those of the corresponding unaugmented basis sets. During these studies an unsatisfying performance of the def2-SVP and def2-QZVPP auxiliary basis sets for Barium was found and improved sets are provided. We establish the versatility of the def2-SVPD, def2-TZVPPD, and def2-QZVPPD basis sets for RI-MP2 and RI-CC (coupled-cluster) energy and property calculations. The influence of diffuse basis functions on correlation energy, basis set superposition error, atomic electron affinity, dipole moments, and computational timings is evaluated at different levels of theory using benchmark sets and showcase examples.

  15. The Karlsruhe Atmospheric Mesoscale Model KAMM; Das Karlsruher Atmosphaerische Mesoskalige Modell KAMM

    Energy Technology Data Exchange (ETDEWEB)

    Adrian, G. [Forschungszentrum Karlsruhe GmbH Umwelt und Technik (Germany). Inst. fuer Meteorologie und Klimaforschung]|[Karlsruhe Univ. (T.H.). (Germany). Inst. fuer Meteorologie und Klimaforschung

    1998-01-01

    The applications of the KAMM model range from real-time simulations over the analysis of mesoscale phenomena and the development of parametrizations to describing climatology. In the course of time, wishes emerged to change essential parts of the original model concept, calling for substantial reprogramming; so it was decided to entirely redraft the dynamic core of KAMM and to program it from the beginning including the parallelization of the code. The paper describes the basics of the new model core. (orig./KW) [Deutsch] Der Anwendungsbereich des KAMM-Modells erstreckt sich von Echtzeitsimulationen, ueber Analyse mesoskaliger Phaenomene, Entwicklung von Parametrisierungen bis hin zur beschreibenden Klimatologie. Weil im Laufe der Entstehungszeit wesentliche Aenderungswuensche des urspruenglichen Konzeptes entstanden sind, die eine Neuprogrammierung in wesentlichen Teilen erforderlich erscheinen lassen, wurde entschieden, den dynamischen Kern von KAMM voellig neu zu gestalten und bei der Programmierung eine Parallelisierung des Codes von Anfang an mit einzubeziehen. Die Grundlagen dieses neuen Modellkernes werden vorgestellt. (orig./KW)

  16. Sandwiched Between Strasbourg and Karlsruhe: EU Fundamental Rights Protection

    NARCIS (Netherlands)

    Reestman, J.H.; Besselink, L.

    2016-01-01

    Starting out from the notion of the `Verfassungsgerichtsverbund´, coined by the President Vosskuhle of the German Federal Constitutional Court, this contribution sketches the manner in which the European Court of Justice operates, sandwiched in between the European Court of Human Rights that sets a

  17. Status of the CERN-Karlsruhe superconducting RF particle separator

    CERN Document Server

    Bauer, W; Dammertz, G; Grundner, M; Husson, L; Lengeler, H; Rathgeber, E

    1975-01-01

    Measurements of single cavity sections and of two joined sections are reported. The problem of storing heat treated sections until final assembly has been investigated. Flooding a cavity at room temperature with nitrogen deteriorates its performance, after the cavity was once excited to a peak electric field of 30 MV/m, corresponding to a peak magnetic field of 850 G and a deflecting field of 5.5 Mv/m. This effect is assumed to be due to a sensibilization of the surface oxides by field emission electrons. The effect is not observed after an electric field of up to 15 MV/m and it also does not appear when the cavity is flooded with argon. (14 refs).

  18. Radioactivity levels in mushrooms collected in the area of Karlsruhe during 1987 and 1988. Radioaktivitaetsgehalte von 1987 und 1988 im Raum Karlsruhe gesammelten Pilzen

    Energy Technology Data Exchange (ETDEWEB)

    Rueckert, G. (Karlsruhe Univ. (T.H.) (Germany, F.R.). Botanisches Inst. und Botanischer Garten); Diehl, J.F.; Heilgeist, M. (Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe (Germany, F.R.). Zentrallaboratorium fuer Isotopentechnik)

    1990-01-01

    Radioactive contamination of wild-growing mushrooms collected in the Northern Black Forest and neighbouring Rhine Valley area has been monitored since the Chernobyl reactor accident. Cs-134, Cs-137, Ag-110m and the natural nuclide K-40 were determined by gamma-spectrometry. Pooled data from all species and all locations showed a decrease in the radio-caesium levels from 1986 to 1988, both in mean values and maximum values. Samples of the same species collected at the same location exhibited large differences, although mixed samples rather than individual mushrooms were measured. Accumulation of caesium was observed particularly in Laccaria amethystina, Xerocomus badius, Xerocomus chrysenteron, Cantharellus tubaeformis, Laccaria laccata, and Russula ochroleuca, with maximum values of 3600 (1986), 2000 (1987), and 1200 (1988) Bq/kg of radio-caesium. A large number of species, among them Calocybe gambosa and Coprinus comatus, showed very small accumulations or no caesium. An accumulation of silver was found in Macrolepiota rhacodes and Agaricus arvensis, which contained a maximum of 11 Bq/kg Ag-110m. (orig.).

  19. [Radioactivity levels in mushrooms collected in the area of Karlsruhe during 1987 and 1988].

    Science.gov (United States)

    Rückert, G; Diehl, J F; Heilgeist, M

    1990-06-01

    Radioactive contamination of wild-growing mushrooms collected in the Northern Black Forest and neighbouring Rhine Valley area has been monitored since the Chernobyl reactor accident. Cs-134, CS-137, Ag-100m and the natural nuclide K-40 were determined by gamma-spectrometry. Pooled data from all species and all locations showed a decrease in the radio-caesium levels from 1986 to 1988, both in mean values and maximum values. Samples of the same species collected at the same location exhibited large differences, although mixed samples rather than individual mushrooms were measured. Accumulation of caesium was observed particularly in Laccaria amethystina, Xerocomus badius, Xerocomus chrysenteron, Cantharellus tubaeformis, Laccaria laccata, and Russula ochroleuca, with maximum values of 3600 (1986), 2000 (1987), and 1200 (1988) Bq/kg of radiocaesium. A large number of species, among them Calocybe gambosa and Coprinus comatus, showed very small accumulations or no caesium. An accumulation of silver was found in Macrolepiota rhacodes and Agaricus arvensis, which contained a maximum of 11 Bq/kg Ag-110m.

  20. Long-term permeator experiment PETRA at the tritium laboratory Karlsruhe: commissioning tests with tritium

    Energy Technology Data Exchange (ETDEWEB)

    Penzhorn, R.D.; Berndt, U.; Kirste, E.; Hellriegel, W.; Jung, W.; Pejsa, R.; Romer, O. [Research Center Karlsruhe (Germany)

    1995-10-01

    During the commissioning of the PETRA facility, the PETRA PdAg permeator was characterized using hydrogen isotopes by determining the hydrogen curves for H{sub 2}, D{sub 2} and DT as well as He curves for various H{sub 2}/D{sub 2}/He gas mixtures at 300 and 400{degree}C. A method was developed to verify the mechanical integrity of the permeator during runs with the tritium. The H{sub 2} and D{sub 2} permeation losses into the isolation vacuum of the permeator were quantified. Hydrogen permeation into the isolation vacuum could be kept at levels low enough to permit an undisturbed continuous operation of the permeator using a ZrCo tritium storage vessel. It was shown that the combination of the PETRA facility with a Normetex scroll pump, it is possible to extract at <320{degree}C >98% of the hydrogen isotopes from the ZrCo storage vessel with (a) negligible permeation losses, (b) without the danger of disproportionation of the intermetallic compound and (c) with the minimization of the tritium inventory in the facility. 5 refs., 13 figs., 1 tab.

  1. Symposium on Turbulent Shear Flows (4th) Held at Karlsruhe University (Germany, F.R.), 12-14 September 1983.

    Science.gov (United States)

    1983-09-01

    cellular secondary currents a) Presently Alexander von Humboldt fellow, Inst. of Hydro- in (a) water-flow with those in (b) air-flow. mechanics, Univ...Y 3 (-fvl 27)iHz 18, 831.,-% u I qv O(-If,/ 8.7)Hz." - 02 7 Dinkelacker, A., Hessel , M, Meier, G.E.A., and Schewe, G., 1977 "Investigation of Pressure

  2. Programming Environments for High Level Scientific Problem Solving. IFIP WG 2.5 Working Conference 6 Held in Karlsruhe, Germany on September 23 - 27, 1991

    Science.gov (United States)

    1991-09-27

    Ph.D.Dissertation, Tech. Report SCRD tomatic Translation of FORTRAN Pro- No.595, Center for Supercomputing Re- grams to Vector Form ACM TOPLAS search...138 DESIGN AND IMPLEMENTATION OF SYMBOLIC COMPUTATION SYSTEMS Alfonso Miola Dipartimento di Informatica e Sistemistica Universiti. degli Studi di Roma ...34La Sapienza" Via Salaria 113, 00198 Roma , Italy. Abstract The paper presents the development of a research project based on a new methodological

  3. International Annual Conference (29th) of ICT Held in Karlsruhe, Federal Republic of Germany on June 30-July 3, 1998. Energetic Materials; Production, Processing and Characterization

    Science.gov (United States)

    1998-06-26

    and somit in Relation zur MeBgr6IBe grof ~e endotherme Effekte auftreten. Dies 1st in Abb. 6 anhand emner Messang Jeeramnpulle mit Scheibe" gegen eine...bzw. ADN in geringen Ausbeuten; als Hauptprodukt entsteht AN. Wegen des grof ~en Interesses an ADN und der einfachen Einstufen-Synthese aus NH-3 und...empfindliche Explosivstoffe ist die Herstellung febistellenarmer Kristalle von grof ~em Interes- se. Durch Rekcristallisation aus L6sungen lassen sich

  4. The Karlsruhe Metabolomics and Nutrition (KarMeN) Study: Protocol and Methods of a Cross-Sectional Study to Characterize the Metabolome of Healthy Men and Women.

    Science.gov (United States)

    Bub, Achim; Kriebel, Anita; Dörr, Claudia; Bandt, Susanne; Rist, Manuela; Roth, Alexander; Hummel, Eva; Kulling, Sabine; Hoffmann, Ingrid; Watzl, Bernhard

    2016-07-15

    The human metabolome is influenced by various intrinsic and extrinsic factors. A precondition to identify such biomarkers is the comprehensive understanding of the composition and variability of the metabolome of healthy humans. Sample handling aspects have an important impact on the composition of the metabolome; therefore, it is crucial for any metabolomics study to standardize protocols on sample collection, preanalytical sample handling, storage, and analytics to keep the nonbiological variability as low as possible. The main objective of the KarMeN study is to analyze the human metabolome in blood and urine by targeted and untargeted metabolite profiling (gas chromatography-mass spectrometry [GC-MS], GC×GC-MS, liquid chromatography-mass spectrometry [LC-MS/MS], and(1)H nuclear magnetic resonance [NMR] spectroscopy) and to determine the impact of sex, age, body composition, diet, and physical activity on metabolite profiles of healthy women and men. Here, we report the outline of the study protocol with special regard to all aspects that should be considered in studies applying metabolomics. Healthy men and women, aged 18 years or older, were recruited. In addition to a number of anthropometric (height, weight, body mass index, waist circumference, body composition), clinical (blood pressure, electrocardiogram, blood and urine clinical chemistry) and functional parameters (lung function, arterial stiffness), resting metabolic rate, physical activity, fitness, and dietary intake were assessed, and 24-hour urine, fasting spot urine, and plasma samples were collected. Standard operating procedures were established for all steps of the study design. Using different analytical techniques (LC-MS, GC×GC-MS,(1)H NMR spectroscopy), metabolite profiles of urine and plasma were determined. Data will be analyzed using univariate and multivariate as well as predictive modeling methods. The project was funded in 2011 and enrollment was carried out between March 2012 and July 2013. A total of 301 volunteers were eligible to participate in the study. Metabolite profiling of plasma and urine samples has been completed and data analysis is currently underway. We established the KarMeN study applying a broad set of clinical and physiological examinations with a high degree of standardization. Our experimental approach of combining scheduled timing of examinations and sampling with the multiplatform approach (GC×GC-MS, GC-MS, LC-MS/MS, and(1)H NMR spectroscopy) will enable us to differentiate between current and long-term effects of diet and physical activity on metabolite profiles, while enabling us at the same time to consider confounders such as age and sex in the KarMeN study. German Clinical Trials Register DRKS00004890; https://drks-neu.uniklinik-freiburg.de/drks_web/navigate.do? navigationId=trial.HTML&TRIAL_ID=DRKS00004890 (Archived by WebCite at http://www.webcitation.org/6iyM8dMtx).

  5. Contact arc metal cutting (CAMC), a young cutting technique has matured. Successful use under water in the demolition of the Karlsruhe multipurpose research reactor (MFZR); Contact-Arc-Metal-Cutting (CAMC) - Eine junge Schneidtechnologie ist den Kinderschuhen entwachsen. Erfolgreicher Einsatz unter Wasser beim Rueckbau des Mehrzweckforschungsreaktors Karlsruhe (MZFR)

    Energy Technology Data Exchange (ETDEWEB)

    Stanke, D.; Bienia, H.; Loeb, A.; Thoma, M. [RWE NUKEM GmbH, Alzenau (Germany); Eisenmann, B.; Prechtl, E. [Forschungszentrum Karlsruhe GmbH, Eggenstein-Leopoldshafen (Germany); Suessdorf, W. [Studsvik-IFM, Stutensee-Blankenloch (Germany); Kremer, G.; Ruemenapp, T. [Hannover Univ. (Germany). Inst. fuer Werkstoffkunde

    2006-03-15

    Dismantling radiologically burdened large components is among the most complex and difficult jobs in the demolition of nuclear installations. The technologies used and their safe operation play a key role in demolition. Dismantling highly activated components as a rule requires shielding by water. As a consequence, the techniques employed must be designed for use under water. A variety of technologies are available for these applications. One established mechanical cutting method is water abrasive suspension jet cutting (WASS). Because of the small cutting nozzle employed, this highly flexible cutting technique can be used nearly anywhere together with different guiding systems. In the course of disassembly under water of the MZFR, plasma cutting has been found to be a reliable and efficient technique for remote operation. Contact arc metal cutting is a thermal cutting technique allowing all electrically conducting materials, including those with claddings, to be cut nearly irrespective of their component geometries. The methods, technology, possible uses, and practical operation of contact arc metal cutting in the demolition of the MZFR are covered in this article. (orig.)

  6. Metals near a magnetic instability

    Indian Academy of Sciences (India)

    Physikalisches Institut, Universität Karlsruhe, D-76128 Karlsruhe, Germany; Forschungszentrum Karlsruhe, Institut für Festkörperphysik, D-76021 Karlsruhe, Germany; Department of Physics, Kent State University, Kent, 44242 Ohio, USA; Max-Planck-Institut f¨ur chemische Physik fester Stoffe, D-01187 Dresden, Germany ...

  7. Cost/effectiveness aspects of road lighting : contribution to CIE TC 4.6 Symposium on Measures of Road Lighting Effectiveness, Karlsruhe, 5-6 July, 1977. Session II - Road lighting and accidents.

    NARCIS (Netherlands)

    Flury, F.C.

    1977-01-01

    The common method to determine the effect of road lighting on traffic safety, is to compare accident numbers during daylight and darkness, before and after the measure is taken. This approach ignores the possibility of increased risk of collisions with road side obstacles due to the erection of

  8. Commensurability oscillations in NdBa 2 Cu 3 O single crystals

    Indian Academy of Sciences (India)

    Author Affiliations. H Küpfer1 G Ravikumar1 2 Th Wolf3 A A Zhukov4 H Wühl1. Forschungszentrum Karlsruhe, Institut für Technische Physik and Universität Karlsruhe, Postfach 3640, 76021 Karlsruhe, Germany; Technical Physics and Prototype Engineering Division, Bhabha Atomic Research Centre, Mumbai 400 085, India ...

  9. List of participants

    Indian Academy of Sciences (India)

    Robert.Crittenden@port.ac.uk de Boer Wim, University of Karlsruhe,. Karlsruhe, Germany deboer@ekp.uni-karlsruhe.de. D'Hondt Jorgen, Vrije Universiteit. Brussel, Brussel, Belgium ... Harlander Robert, Bergische Univer- sitaet Wuppertal, Wuppertal, Ger- ... USA tpmccauley@lbl.gov. Miller David, University of Glasgow,.

  10. Cost/effectiveness aspects of road lighting : revised version of Contribution to CIE TC-4.6 Symposium on Measures of Road Lighting Effectiveness, Session II - Road lighting and accidents, Karlsruhe, 5-6 July 1977, SWOV R-77-46.

    NARCIS (Netherlands)

    Flury, F.C.

    1981-01-01

    The common method to determine the effect of road lighting on traffic safety, is to compare accident numbers during daylight and darkness, before and after the measure is taken. This approach ignores the possibility of increased risk of collisions with road side obstacles due to the erection of

  11. Muusikamaailm. Festival ECLAT Stuttgardis. Ooperiõhtute tipphetki. Liebermanni "Medea" Pariisis / Priit Kuusk

    Index Scriptorium Estoniae

    Kuusk, Priit, 1938-

    2002-01-01

    Uue muusika festivalist Stuttgardi Theaterhausis. Ooperiõhtute tipphetki Milanos, Karlsruhes, New Yorgis. Pariisi Rahvusooperis Opera Bastille's tuli esiettekandele Rolf Liebermanni lavatükk "Medea".

  12. Tugi Eesti lastekodulastele / Aino Siebert

    Index Scriptorium Estoniae

    Siebert, Aino

    2004-01-01

    7. mail Karlsruhe lähistel Eggensteini evangeelses kirikus toimunud rahvusvahelisest heategevuskontserdist, millega toetatakse eesti lastekodudes elavaid lapsi (kontserdi korraldajaks Heidelbergis asutatud Saksa-Eesti Foorum (SEF))

  13. Radiolysis and corrosion of Pu-doped UO2 pellets in chloride brine

    Indian Academy of Sciences (India)

    Unknown

    Radiolysis and corrosion of. 238. Pu-doped UO2 pellets in chloride brine. M KELM* and E BOHNERT. Forschungszentrum Karlsruhe, Institut für Nukleare Entsorgung, Postfach. 3640, 76021 Karlsruhe, Germany e-mail: kelm@ine.f3k.de. Abstract. Deaerated 5 M NaCl solution is irradiated in the presence of UO2 pellets.

  14. A small and compact AMS facility for tritium depth profiling

    Indian Academy of Sciences (India)

    Forschungszentrum Rossendorf, Institute of Ion Beam Physics and Materials Research, P.O. Box 51 01 19, D-01314 Dresden, Germany; Forschungszentrum Karlsruhe, Tritium Laboratory, P.O. Box 35 40, D-76021 Karlsruhe, Germany; Department of Physics, University of Lund, Sölvegatan 14, SE-223 62 Lund, Sweden ...

  15. Wege der estnischen Musik von russischer Romantik zum Schamanentum. Lepo Sumera als prominenter Vertreter der Neuen Musik Estlands: seeine neue Sinfonie steht im Mittelpunkt von Konzerten der Staatskapelle

    Index Scriptorium Estoniae

    1992-01-01

    Eesti muusika tee vene romantismist £amanismini: Lepo Sumera kui eesti uue muusika silmapaistev esindaja/ Tema uus sümfoonia on Staatskapelle kontsertide keskpunktiks. Eesti kultuuripäevadelt Karlsruhes; Lepo Sumera muusikast

  16. Solid electron sources for the energy scale monitoring in the KATRIN experiment

    CERN Document Server

    Zbořil, Miroslav; Vénos, D

    The KArlsruhe TRItium Neutrino (KATRIN) experiment represents a next-generation tritium $\\beta$-decay experiment designed to perform a high precision direct measurement of the electron anti-neutrino mass m($\

  17. Kinokunsti tuleviku-uuringud Kiasmas / Rael Artel

    Index Scriptorium Estoniae

    Artel, Rael, 1980-

    2003-01-01

    Helsingi Kiasma Kaasaegse Kunsti Muuseumis on näitus tulevase kinokunsti tehnilistest võimalustest "Future Cinema. The Cinematic Imaginary after Film", mis on koostatud Karlsruhe Kunsti ja Meediatehnoloogia Keskuses (kuraatorid Jefferey Shaw ja Peter Weibel)

  18. Manufacturing of microcomponents in a research institute under DIN EN ISO 9001

    Science.gov (United States)

    Maas, Dieter; Karl, Bernhard; Saile, Volker; Schulz, Joachim

    2000-08-01

    The Institute for Microstructure Technology at Forschungszentrum Karlsruhe has implemented a rigorous quality management system and was certified according to the DIN ISO EN 9001 standard in January 2000.

  19. Mapping Virtual Materiality

    DEFF Research Database (Denmark)

    Krogh Jensen, Marianne

    2001-01-01

    A publication on the occasion of the exhibition: Olafur Eliasson: "Surround Surrounded" Neue Galerie am Landesmuseum Johanneum, Graz, Austria, March 30 - May 21, 2000. ZKM Center for Art and Media Karlsruhe, Germany, May 31 - August 26, 2001....

  20. Fault simulator trainer for nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Koerting, K. (Kernforschungszentrum Karlsruhe G.m.b.H. (Germany, F.R.))

    1983-03-01

    A new nuclear power plant control simulator, developed at Karlsruhe for training operators, is described, based on an office type minicomputer with visual displays representing the various relevant reactor parameters, commands, controls status and safety arrangements.

  1. Superconducting RF separator for Omega Spectrometer

    CERN Multimedia

    1977-01-01

    The photo shows an Nb-deflector for the superconducting RF separator ready for installation in its cryostat (visible at the back). Each deflector was about 3 m long. L. Husson and P. Skacel (Karlsruhe) stand on the left, A. Scharding (CERN) stands on the right. This particle separator, the result of a collaboration between the Gesellshaft für Kernforschung, Karlsruhe, and CERN was installed in the S1 beam line to Omega spectrometer. (See Annual Report 1977.)

  2. Status and perspectives of the dismantling of nuclear power plants in Germany (Dismantling monitoring 2015); Stand und Perspektiven des Rueckbaus von Kernkraftwerken in Deutschland (''Rueckbau-Monitoring 2015'')

    Energy Technology Data Exchange (ETDEWEB)

    Wealer, Ben; Seidel, Jan Paul [Technische Univ. Berlin (Germany); Gerbaulet, Clemens; Hirschhausen, Christian von [Technische Univ. Berlin (Germany); Deutsches Institut fuer Wirtschaftsforschung, Berlin (Germany)

    2015-11-15

    The dismantling monitoring 2015 covers the nuclear power plants HDR Grosswelzheim, Niederaichbach (KKN), MZFR Karlsruhe, Lingen (KWL), Gundremmingen unit A (KRB-A), VAK Kahl, Muehlheim-Kaerlich (KMK), THTR-300 Hamm-Uentrop, AVR Juelich, Greifswald (KGR 1-5), KNK II Karlsruhe, Rheinsberg (KKR), Wuergassen (KWW), Stade (KKS), Obrigheim (KWO), SNR 300. The post-operational phase activities of other shut-down nuclear power plants and the active companies are summarized.

  3. Book of summaries of dissertations and habilitations written until February 1995 under the guidance of Professor Dr.-Ing. Ulrich Mueller. Dedicated to Professor Ulrich Mueller on the occasion of his 60th anniversary on 28 February 1995; Zusammenfassung der bis Februar 1995 unter Leitung von Herrn Professor Dr.-Ing. Ulrich Mueller abgeschlossenen Dissertationen und Habilitationen. Herrn Professor Ulrich Mueller zum 60. Geburtstag am 28. Februar 1995

    Energy Technology Data Exchange (ETDEWEB)

    Ehrhard, P. [ed.; Knebel, U. [ed.

    1995-02-01

    In March 1974, Dr.-Ing Ulrich Mueller, then Privatdozent (unestablished university lecturer) at the Institut fuer Stroemungslehre und Stroemungsmaschinen (Institute for Fluid Mechanics and Fluid Kinetic Machines) of Karlsruhe University, was appointed Director of the Institut fuer Reaktorbauelemente (IRB) of the former Gesellschaft fuer Kernforschung (GfK), now called Karlsruhe Research Center. In September 1974, he was appointed additional professor. Since his qualification for lecturing at a university, 24 dissertations and two habilitations have been concluded by students under his scientific guidance and mentorship. The report in hand presents summaries of these scientific publications. The theoretical and experimental publications in the field of fluid dynamics and thermodynamics are of significance to the safety and design of components for nuclear power plants and thermonuclear reactors, relating to both basic research and industrial applications. Recent scientific work in progress now also includes aspects of long-term cooling of reactor core melts, or waste treatment by incineration and wet oxidation. The scientific problems and aspects studied in the publications reveal the constant process of change experienced in scientific research, also reflected by the fact that the Karlsruhe facility has been renamed twice in the course of time, into Karlsruhe Nuclear Research Center (KfK) in 1977, and into Karlsruhe Research Center - Technology and Environment in 1995. Professor Mueller`s institute, too, has been renamed in 1993 in response to developments, into Institut fuer Angewandte Thermo- und Fluiddynamik (IATF). (orig.) [Deutsch] Im Maerz 1974 wurde der Privatdozent am Institut fuer Stroemungslehre und Stroemungsmaschinen der Universitaet Karlsruhe (TH), Herr Dr.-Ing. Ulrich Mueller zum Leiter des Instituts fuer Reaktorbauelemente (IRB) der damaligen Gesellschaft fuer Kernforschung (GfK) berufen. Im September 1974 wurde er zum ausserplanmaessigen Professor

  4. The KATRIN Experiment

    CERN Document Server

    Beck, Marucs

    2009-01-01

    The KArlsruhe TRitium Neutrino mass experiment, KATRIN, aims to search for the mass of the electron neutrino with a sensitivity of 0.2 eV/c^2 (90% C.L.) and a detection limit of 0.35 eV/c^2 (5 sigma). Both a positive or a negative result will have far reaching implications for cosmology and the standard model of particle physics and will give new input for astroparticle physics and cosmology. The major components of KATRIN are being set up at the Karlsruhe Institut of Technology in Karlsruhe, Germany, and test measurements of the individual components have started. Data taking with tritium is scheduled to start in 2012.

  5. Arbeitsgarantie : die indische Regierung probiert seit einiger Zeit ein neues Modell aus

    OpenAIRE

    Klonner, Stefan

    2012-01-01

    "Campus-Report" heißt die Radiosendung der Universitäten Heidelberg, Mannheim, Karlsruhe und Freiburg. Die Reportagen über aktuelle Themen aus Forschung und Wissenschaft werden montags bis freitags jeweils um ca. 19.10h im Programm von Radio Regenbogen gesendet. (Empfang in Nordbaden: UKW 102,8. In Mittelbaden: 100,4 und in Südbaden: 101,1) Uni-Radio Baden: ein gemeinsames Projekt der Universitäten Freiburg, Heidelberg, Karlsruhe und Mannheim in Zusammenarbeit mit Radio Regenbogen – unterstüt...

  6. Mikrokredite : Wissenschaftler der Universität Heidelberg erforschen in Indien die Wirkung von Mikrokrediten im Alltag am Beispiel neuer Varianten dieser Finanzierungsmethode

    OpenAIRE

    Klonner, Stefan

    2012-01-01

    "Campus-Report" heißt die Radiosendung der Universitäten Heidelberg, Mannheim, Karlsruhe und Freiburg. Die Reportagen über aktuelle Themen aus Forschung und Wissenschaft werden montags bis freitags jeweils um ca. 19.10h im Programm von Radio Regenbogen gesendet. (Empfang in Nordbaden: UKW 102,8. In Mittelbaden: 100,4 und in Südbaden: 101,1) Uni-Radio Baden: ein gemeinsames Projekt der Universitäten Freiburg, Heidelberg, Karlsruhe und Mannheim in Zusammenarbeit mit Radio Regenbogen – unterstüt...

  7. Experience with two large-scale Hell-cryostats for a superconducting RF particle separator working in closed cycle with a 300 W refrigerator

    CERN Document Server

    Barth, W

    1976-01-01

    The contribution of the Karlsruhe Institut fur Experimental Kernphysik to the RF particle separator at the SPS/CERN consists of the two superconducting deflectors and their Hell-cryostats with the cryogenic and vacuum accessories. The cryostats have to fulfil specifications concerning tightness, thermal insulation, adjustment of the cavities to the beam and reliability. Corresponding cryogenic and RF tests are performed in Karlsruhe before a 300 W refrigerator simulating normal and emergency conditions. Following a description of cryostats design the results of these measurements are compared with the specifications. Operating experience with the cryostats in closed circuit with the refrigerator are reported. (5 refs).

  8. Quantitative measurement of precipitation using radar in comparison with ground-level measurements, taking orographic influences into account; Quantitative Niederschlagsmessung mit Radar im Vergleich mit Bodenmessungen in orographisch gegliedertem Gelaende

    Energy Technology Data Exchange (ETDEWEB)

    Gysi, H. [Radar-Info, Karlsruhe (Germany)

    1998-01-01

    The methods of correction applied to the determination of the spatial distribution of precipitation on the basis of the volumes established by the Karlsruhe C-band precipitation radar distinctly enhance the quality of statements regarding precipitation intensities and their time integration both in summer and winter. (orig./KW) [Deutsch] Die fuer die Bestimmung der raeumlichen Niederschlagsverteilung aus Volumendaten des Karlsruher C-Band Niederschlagradars angewandten Korrekturverfahren verbessern sowohl im Sommer als auch im Winter deutlich die Qualitaet und quantitative Aussagekraft der dargestellten Niederschlagsintensitaeten und deren zeitlichen Integrationen. (orig./KW)

  9. At the Split-Field Magnet

    CERN Multimedia

    CERN PhotoLab

    1980-01-01

    The experiments running in 1980 were R416, R418 and R421. R416 was designed by the CERN-Dortmund-Heidelberg-Karlsruhe-Paris Collège de France-Warsaw Collaboration to study rare events. On the right: the Karlsruhe calorimeter. R418 by the CERN-Heidelberg-Lund Collaboration studied p-alpha and alpha-alpha collisions. R421 by the Bologna-CERN-Frascati-Rome- Bari Collaboration aimed to the comparison of proton-antiproton with positron-electron collisions.

  10. "Experimental Pedagogy" in Germany, Elaborated for Mathematics--A Case Study in Searching the Roots of PME

    Science.gov (United States)

    Schubring, Gert

    2012-01-01

    PME, the International Group for the Psychology of Mathematics Education, was founded in 1976, at the "Third International Congress on Mathematical Education" in Karlsruhe, organised by the International Commission on Mathematics Instruction (ICMI). While PME is thus beyond coming of age and is reflecting its further orientation--due to…

  11. Sound Art. Klang als Medium der Kunst

    DEFF Research Database (Denmark)

    Forskningsformidling på udstilling om lydkunst på ZKM i Karlsruhe. Lavet i samarbejde med Mats Lindström, leder af elektronmusikstudiet EMS (Stockholm). Udstillingen er en del af Morten Søndergaards (AAU) præsentation af skandinavisk lydkunst under titlen 'Unheard Avantgarde', der igen er en del ...... den store udstilling 'Sound as a Medium of Art'....

  12. Investigation and Characterization of Water-Recrystallized Croconic Acid

    Science.gov (United States)

    2016-12-01

    pressing the WR CA not result in the high heat of combustion that was achieved by pressing the AR CA? A possible answer to both questions could be...of ICT ; 1996 June 25–28; Karlsruhe, Federal Republic of Germany. 22.21-22.16. 2. Braga D, Maini L, Grepioni F. Crystallization from hydrochloric

  13. Õisi noppimas / Mati Sirkel

    Index Scriptorium Estoniae

    Sirkel, Mati

    1999-01-01

    Eesti luule antoloogiad 1989-1999: Van haast naamlose kusten. Leiden, 1989 ; Antologija estonskoi poezii. Tallinn, 1990 ; Salatanssija tilantyhjää. Oulu, 1990 ; Das Leben ist noch neu. Karlsruhe, 1992 ; [Eesti luulekassett läti keeles.] Riia, 1998. Antologija estonskoi poezii. Tallinn, 1999. Die Freiheit der Kartoffelkeime. Bremerhaven, 1999.

  14. Collection of $^{83}$Rb at low implantation energy for KATRIN

    CERN Multimedia

    Zboril, M

    KATRIN, the KArlsruhe TRItium Neutrino experiment aims to measure the neutrino mass by spectroscopy of the tritium $\\beta$-decay at the endpoint by means of Magnetic Adiabatic Collimation combined with an Electrostatic filter (MAC-E filter). To monitor the HV-system of the KATRIN-setup, we would need one or two $^{83}$Rb sources roughly every half a year.

  15. Fast Electrical and Optical Diagnostic Principles and Techniques: A NATO Advanced Study Institute.

    Science.gov (United States)

    1983-11-21

    France Texas Tech University P.O. Box 4439 ’ Lubbock, TX 79409 Dr. Robert H. Price Lawrence Livermore National Lab., L-473 P.O. Box 5508 Dr. Klaus Schon...Laboratories 40 Sylvan Road Waltham, MA 02254 Dr. Adolf J. Schwab High Voltage Research Laboratory Dr. Henry L. Pugh, Jr. University of Karlsruhe Air Force

  16. Modelling the wind climate of Ireland

    DEFF Research Database (Denmark)

    Frank, H.P.; Landberg, L.

    1997-01-01

    The wind climate of Ireland has been calculated using the Karlsruhe Atmospheric Mesoscale Model KAMM. The climatology is represented by 65 frequency classes of geostrophic wind that were selected as equiangular direction sectors and speed intervals with equal frequency in a sector. The results...

  17. Fatigue in the Presence of Corrosion (Fatigue sous corrosion)

    Science.gov (United States)

    1999-03-01

    Box 20701 Carretera de Torrej6n a Ajalvir, Pk.4 2500 ES Den Haag 28850 Torrej6n de Ardoz - Madrid PORTUGAL ETATS-UNIS Estado Maior da Forqa Arrea NASA...Publications) Fachinformationszentrum Karlsruhe Carretera de Torrej6n a Ajalvir, Pk.4 D-76344 Eggenstein-Leopoldshafen 2 28850 Torrej6n de Ardoz

  18. RTO Highlights 1998

    Science.gov (United States)

    1998-12-01

    Office ESPAGNE National Aerospace Laboratory NLR INTA (RTO/AGARD Publications) P.O. Box 90502 Carretera de Torrej6n a Ajalvir, Pk.4 1006 BM Amsterdam...Fachinformationszentrum Karlsruhe Carretera de Torrej6n a Ajalvir, Pk.4 D-76344 Eggenstein-Leopoldshafen 2 28850 Torrej6n de Ardoz - Madrid GREECE

  19. Saksamaal kõlas nii klassika kui "juhtmemuusika" / Aino Siebert ; fotod: Werner Siebert

    Index Scriptorium Estoniae

    Siebert, Aino

    2008-01-01

    Mainzi Maakonnamuuseumis avatud Gottlieb Welté näituse "Lihvimata geniaalsus" raames toimunud Eesti päevast 30. märtsil. Karlsruhe ZKMis (Kunsti- ja Meediatehnoloogia keskus) avatud festivalist Performance-Art - kaasaegne tants ja uued meediad. Festival leiab aset Baden-Württembergi liidumaal toimuvate kultuuriürituste raames

  20. Modelling the potential of rainwater harvesting in western Kenya ...

    African Journals Online (AJOL)

    Samuel

    1 Karlsruhe University of Applied Sciences, Faculty of Information Management and Media, ... supply, climate regulation and CO2 fixing (NeFo, 2010). ..... marketing RWH. The models require a number of constants and parameters. These were obtained either from literature research, derived from geodata processing ...

  1. The cryogenic pumping section of KATRIN and the test experiment TRAP

    CERN Document Server

    Eichelhardt, F

    2011-01-01

    The Karlsruhe Tritium Neutrino experiment (KATRIN) employs a Cryogenic Pumping Section (CPS) at ~ 4.5 K to suppress the tritium penetration into the spectrometers. A test experiment (TRAP - Tritium Argon frost Pump) has been set up to investigate the tritium pumping performance of the CPS.

  2. Tagasiviitavad tõendid: teine pilk pilditeadusele / Beat Wyss ; intervjueerinud Ivar-Kristjan Hein

    Index Scriptorium Estoniae

    Wyss, Beat, 1947-

    2011-01-01

    Intervjuus Karlsruhe kunsti- ja disainiülikooli kunstiajaloo ja meediateooria professori Beat Wyssiga on teemaks Zürichis tema juhitav uurimisprojekt, mille keskmes on Venezia biennaal Ida-Euroopa riikide positsioonilt, tema EKA Kunstiteaduse Instituudi doktorantidele peetud seminar "Tagasiviitavad tõendid. Teine pilk pilditeadusele", tema kaasaegse kunsti universaalsed põhimõtted

  3. Timber-concrete composite beams

    NARCIS (Netherlands)

    Van der Linden, M.L.R.

    1999-01-01

    In this paper an easy-to-use design model for timber-concrete composite beams is discussed. The model is applicable for computer simulations as well as for hand calculations. A research programme was started in 1992 in co-operation with the University of Karlsruhe, to study the loadbearing

  4. Availability measurement of grid services from the perspective of a scientific computing centre

    Science.gov (United States)

    Marten, H.; Koenig, T.

    2011-12-01

    The Karlsruhe Institute of Technology (KIT) is the merger of Forschungszentrum Karlsruhe and the Technical University Karlsruhe. The Steinbuch Centre for Computing (SCC) was one of the first new organizational units of KIT, combining the former Institute for Scientific Computing of Forschungszentrum Karlsruhe and the Computing Centre of the University. IT service management according to the worldwide de-facto-standard "IT Infrastructure Library (ITIL)" [1] was chosen by SCC as a strategic element to support the merging of the two existing computing centres located at a distance of about 10 km. The availability and reliability of IT services directly influence the customer satisfaction as well as the reputation of the service provider, and unscheduled loss of availability due to hardware or software failures may even result in severe consequences like data loss. Fault tolerant and error correcting design features are reducing the risk of IT component failures and help to improve the delivered availability. The ITIL process controlling the respective design is called Availability Management [1]. This paper discusses Availability Management regarding grid services delivered to WLCG and provides a few elementary guidelines for availability measurements and calculations of services consisting of arbitrary numbers of components.

  5. Local Covariance Functions and Density Distributions.

    Science.gov (United States)

    1984-06-01

    function K(oR) will be virtually zero for large distances. We may therefore approximate sin 1, and obtain : 2Jz +1=P± f ’ K(,R) P (cos 4)do (2.30) - 2 0 The...Moritz, H.: Advanced physical geodesy. Herbert Wichman Verlag, Karlsruhe, 1980. - Nash, R.A. and S.K. Jordan: Statistical geodesy - an engineering

  6. Stakeholder-Analyse bei der Vermittlung von Informationskompetenz in Schule und Unterricht : ein Projektbericht

    OpenAIRE

    Schneider, Helen

    2008-01-01

    This report was developed during my internship at FIZ Karlsruhe from July until September 2008. It documents the process and organisation of my project about information literacy. This report also served as record of achievement for my study in Library and Information Management at the Media University in Stuttgart/Germany

  7. An Agent-Based Mode-change Framework for Flexible Wireless Sensor Networks (POSTPRINT)

    Science.gov (United States)

    2010-06-01

    networks 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT: SAR 18. NUMBER OF PAGES 14 19a. NAME OF RESPONSIBLE PERSON (Monitor) a...8] Prehofer, C Hurler B, Wei Q and Zittebart, M., “A Framework for Network Mode Control in Wireless Sensor Networks” Telematics Technical Reports ISSN 1613-849X, University Karlsruhe, Dec/2005.

  8. Collective Quantum Phase-Slip Dynamics in Superconducting Nanowire Arrays

    Science.gov (United States)

    Skacel, Sebastian T.; Voss, Jan N.; Bier, Tobias; Radke, Lucas; Weides, Martin; Rotzinger, Hannes; Mooij, Hans E.; Ustinov, Alexey V.

    2014-03-01

    Superconducting nanowire arrays exhibit quantum phase-slip (QPS) phenomenon if the superconductor has a very high normal-state sheet resistance. We experimentally study QPS effects in arrays of nanowires embedded in a resonant circuit at GHz frequencies. We probe this circuit at ultra-low microwave power, applied flux and mK temperatures. The nanowires are fabricated utilizing aluminium grown in a precisely-controlled oxygen atmosphere. In this way, we aim to control the QPS rate for a given wire width. The wires are defined with conventional electron beam lithography down to a width of 20 nm. We will present the fabrication of the nanowire arrays and first microwave measurements at mK temperatures. Center for Functional Nanostructures, Karlsruhe Institute of Technology, D-76128 Karlsruhe, Germany.

  9. Comparative analysis of three atmospheric dispersion coefficient systems at the Angra dos Reis, RJ, region; Analise comparativa de tres sistemas de coeficientes de dispersao atmosferica na regiao de Angra dos Reis, RJ

    Energy Technology Data Exchange (ETDEWEB)

    Biagio, Rosa Maria de Souza

    1982-07-01

    A comparative analysis was made in this work among Pasquill-Gifford (PG) atmospheric dispersion coefficients and those determined at the Juelich and Karlsruhe sites with the purpose of suggesting which one would be the most applicable to the Angra site. Each one of the three systems was determined by different experiments, carried out over sites with diversified features. The systems of Juelich and Karlsruhe were obtained over sites with high surface roughness and from stacks (elevated releases), while the PG system was obtained over sites with a small surface roughness and from ground level releases. The results of the application of these systems at a complex site like Angra,which has a highly diversified structure encompassing sea, vegetation, predominance of light winds and stable stability classes, show that the PG system, the most used in the world, is still the best choice. (author)

  10. Implementation of a quality management system at the PHOENIX facility (CryoMaK)

    Energy Technology Data Exchange (ETDEWEB)

    Urbach, Elisabeth, E-mail: elisabeth.urbach@kit.edu; Bagrets, Nadezda; Weiss, Klaus-Peter

    2013-10-15

    Within a variety of mechanical tests in the Cryogenic Material Test Facility Karlsruhe (CryoMaK) at Karlsruhe Institute of Technology (KIT) the PHOENIX facility was prepared for multiple standard tensile tests in liquid helium, liquid nitrogen and at room temperature. With the multiple specimens holder 10 specimens can be tested within one cool down one after another. A quality management system is needed for ensuring reproducible preconditions. For the guarantee of the competence of the laboratory and the measurement equipment, a quality management system was implemented and prepared for accreditation according to DIN EN ISO/IEC 17025 (ISO 17025). The implementation of a quality management system allows high precision test results included the estimation of measurement uncertainty. This paper gives an overview of the management and technical requirements for the accreditation of the PHOENIX testing facility.

  11. International Conference ML4CPS 2016

    CERN Document Server

    Niggemann, Oliver; Kühnert, Christian

    2017-01-01

    The work presents new approaches to Machine Learning for Cyber Physical Systems, experiences and visions. It contains some selected papers from the international Conference ML4CPS – Machine Learning for Cyber Physical Systems, which was held in Karlsruhe, September 29th, 2016. Cyber Physical Systems are characterized by their ability to adapt and to learn: They analyze their environment and, based on observations, they learn patterns, correlations and predictive models. Typical applications are condition monitoring, predictive maintenance, image processing and diagnosis. Machine Learning is the key technology for these developments. The Editors Prof. Dr.-Ing. Jürgen Beyerer is Professor at the Department for Interactive Real-Time Systems at the Karlsruhe Institute of Technology. In addition he manages the Fraunhofer Institute of Optronics, System Technologies and Image Exploitation IOSB. Prof. Dr. Oliver Niggemann is Professor for Embedded Software Engineering. His research interests are in the field of Di...

  12. Studies for integration of recent information from risk analyses into systems for accident management in the environment of nuclear installations; Untersuchungen zur Umsetzung neuer Ergebnisse von Risikoanalysen auf die Notfallschutzplanung in der Umgebung kerntechnischer Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1998-03-01

    The module for turbulence parametrisation (DFKSIG), developed by an ad-hoc working group of the Franco-German Commission, as well as the upstream pre-processors for calculation of the required boundary layer parameters from meteorological measurements (modules MPT and MPS) are to be integrated into the current version of the RODOS/RESY program package of the Institut fuer Neutronenphysik and Reaktortechnik (INR) of KArlsruhe Research Center. (orig./CB) [Deutsch] Das im Rahmen einer ad hoc-Arbeitsgruppe der Deutsch-Franzoesischen Kommission entwickelte Modul zur Turbulenzparametrisierung (DFKSIG) sowie die vorgeschalteten Praeprozessoren zur Berechnung der erforderlichen Grenzschichtparameter aus meteorologischen Messungen (Module MPT und MPS) sollen lauffaehig in die aktuelle Version des Programmpaketes RODOS/RESY des Instituts fuer Neutronenphysik und Reaktortechnik (INR) des Forschungszentrums Karlsruhe eingebaut werden. (orig.)

  13. Radio emission of energetic cosmic ray air showers: Polarization measurements with LOPES

    Energy Technology Data Exchange (ETDEWEB)

    Isar, P.G. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany)], E-mail: gina.isar@ik.fzk.de; Apel, W.D. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Arteaga, J.C. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe (Germany); Asch, T. [Inst. Prozessdatenverarbeitung und Elektronik, Forschungszentrum Karlsruhe (Germany); Auffenberg, J. [Fachbereich Physik, Universitaet Wuppertal (Germany); Badea, F. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Baehren, L. [Department of Astrophysics, Radboud University Nijmegen (Netherlands); Bekk, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie Bonn (Germany); Bluemer, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe (Germany); Bozdog, H. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen (Germany); Buitink, S. [Department of Astrophysics, Radboud University Nijmegen (Netherlands); Cantoni, E. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Istituto di Fisica dello Spazio Interplanetario, INAF Torino (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe (Germany); Daumiller, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany)] (and others)

    2009-06-01

    LOPES is a radio antenna array co-located with the Karlsruhe Shower Core and Array DEtector, KASCADE-Grande in Forschungszentrum Karlsruhe, Germany, which provides well-calibrated trigger information and air shower parameters for primary energies up to 10{sup 18}eV. By the end of 2006, the radio antennas were re-configured to perform polarization measurements of the radio signal of cosmic ray air showers, recording in the same time both, the East-West and North-South polarization directions of the radio emission. The main goal of these measurements is to reconstruct the polarization characteristics of the emitted signal. This will allow a detailed comparison with theoretical predictions. The current status of these measurements is reported here.

  14. TRITIUM-β-DECAY Experiments - the Direct way to the Absolute Neutrino Mass

    Science.gov (United States)

    Bornschein, Lutz

    2013-11-01

    Tritium-β-decay experiments provide the most sensitive approach to measure the absolute neutrino mass in a model independent way. The Karlsruhe Tritium Neutrino experiment KATRIN will measure the neutrino mass scale with an expected sensitivity of 0.2 eV/c2 (90% C.L.) and so will help to clarify the roles of neutrinos in the early universe. KATRIN investigates spectroscopically the electron spectrum from tritium β-decay 3 H -> 3 {He} + {e}^ - + bar ν e close to the kinematic endpoint of 18.6 keV. It will use a windowless gaseous tritium source in combination with an electrostatic filter for energy analysis. KATRIN is currently under construction at the Karlsruhe Institute of Technology (KIT) Campus North. This proceeding will give an overview of the status of the main components of the KATRIN experiment.

  15. German visits to CERN

    CERN Multimedia

    2007-01-01

    State secretary to Germany's Federal Ministry of Education and Research, Frieder Meyer-Krahmer, with CERN's Director-General Robert Aymar.On 21 February, Professor Frieder Meyer-Krahmer, State Secretary to Germany's Federal Ministry of Education and Research, came to CERN. He visited the ALICE and ATLAS experiments and the computing centre before meeting the CERN's Director-General, some German physicists and members of the top management. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Peter Frankenberg, and CERN's Director-General, Robert Aymar, signing an agreement on education. In the background: Sigurd Lettow, CERN's Director of Finance and Human Resources, and Karl-Heinz Meisel, Rector of the Fachhochschule Karlsruhe. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Prof. Peter Frankenberg, visited CERN on 23 February. He was accompanied by the Rector of the Fachhochschule Karlsruhe, Prof. Karl-Heinz Meisel, and b...

  16. Dependence of the wind climate of Ireland on the direction distribution of geostrophic wind; Die Abhaengigkeit des Windklimas von Irland von der Richtungsverteilung des geostrophischen Windes

    Energy Technology Data Exchange (ETDEWEB)

    Frank, H.P. [Forskningcenter Risoe, Roskilde (Denmark). Afdelingen for Vindenergi og Atmosfaerefysik

    1998-01-01

    The wind climate of Ireland is calculated using the Karlsruhe Atmospheric Mesoscale Model KAMM. The dependence of the simulated wind energy on the direction distribution of geostrophic wind is studied. As geostrophic winds from the south-west are most frequent, sites on the north-west coast are particularly suited for wind power stations. In addition, geostrophic wind increases from the south-east to the north-west. (orig.) [Deutsch] Das Windklima von Irland wurde mit dem Karlsruher Atmosphaerischen Mesoskaligen Modell KAMM berechnet. Hier wird die Abhaengigkeit der simultierten Windenergie von der Richtungsverteilung des geostrophischen Windes untersucht. Da geostrophische Winde aus Suedwest am haeufigsten vorkommen, eignet sich besonders die Nordwestkueste als Standort fuer Windkraftanlagen. Zusaetzlich nimmt auch der mittlere geostrophische Wind von Suedost nach Nordwest zu. (orig.)

  17. 6. annual report, research programme ``Environment and health``. Conference programme and abstracts; 6. Statuskolloquium des Projektes Umwelt und Gesundheit (PUG). Programm und Kurzfassung der Vortraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The document contains the abstracts of papers and the contributions to the discussion forums of the 6th status colloquium of the ``Environment and Health`` project, held on 3. and 4. March 1997 at Karlsruhe Research Center, Fortbildungszentrum fuer Technik und Umwelt. The session subjects are: Air pollution and respiratory system diseases (LUVA session); Diseases caused by anthropogenic trace substances in the environment (UTOX session); Food-induced allergies and intolerance phenomena (PAUL session). (VHE) [Deutsch] Im vorliegenden Band werden die Abstracts der Vortraege und der Beitraege der Diskussionskreise des 6. Statuskolloquiums des Projektes `Umwelt und Gesundheit` im Fortbildungszentrum fuer Technik und Umwelt des Forschungszentrums Karlsruhe vom 03. und 04.03.1997 vorgestellt. Themen waren `Luftverunreinigungen und Atemwegserkrankungen` (LUVA), `Erkrankungen durch zivilisationsbedingte Spurenstoffe in der Umwelt` (UTOX) sowie `Allergien und Unvertraeglichkeitsreaktionen durch Lebensmittel` (PAUL). (VHE)

  18. Individualized three-dimensional printed cage for spinal cervical fusion

    Directory of Open Access Journals (Sweden)

    Uwe Spetzger

    2017-01-01

    Uwe Spetzger, MD, is the Chairman of Department of Neurosurgery, Klinikum Karlsruhe, and Institute for Anthropomatics, Karlsruhe Institute of Technology (KIT, Karlsruhe, Germany. Uwe Spetzger received his medical degree in 1989 at the Medical Faculty, University of Heidelberg, Germany. He passed the US American medical exam (ECFMG in 1990. He has started his neurosurgical training in 1990 at the Department of Neurosurgery, Technical University (RWTH Aachen and got his board certification of neurosurgeon in 1996. The Grant of the Wilhelm-Tonnis-Foundation of the German Society of Neurosurgery (DGNC enables his scientific internship in 1999 at Department of Neurosurgery, University of Illinois at Chicago (UIC. In June 1999, he passed the European Examination in Neurosurgery (EANS. From 1999 - 2002 he was vice-chairman of the Department of Neurosurgery at the University of Freiburg and the director of the interdisciplinary centre for skull base surgery at Freiburg University. Since 2002 he is Chairman of the Department of Neurosurgery, Klinikum Karlsruhe and in 2003 he became an active member of the Faculty of Computer Science, Humanoids and Intelligence Systems Lab - Institute for Anthropomatics at KIT. Prof. Spetzger became the president of the international Society of Medical Innovation and Technology iSMIT in 2013 and the congress president of the 66th Annual Meeting of German Society of Neurosurgery DGNC in 2015 and the Vice-President of the International Society of Digital Medicine in 2016. He is member of several national and international neurosurgical and medical technological societies. His main surgical and research interests are cerebrovascular surgery, skull base surgery, computer-assisted and robotic surgery, neuronavigation and spinal microsurgery.

  19. 1st International Symposium on Energy System Optimization

    CERN Document Server

    Fichtner, Wolf; Heuveline, Vincent; Leibfried, Thomas

    2017-01-01

    The papers presented in this volume address diverse challenges in energy systems, ranging from operational to investment planning problems, from market economics to technical and environmental considerations, from distribution grids to transmission grids and from theoretical considerations to data provision concerns and applied case studies. The International Symposium on Energy System Optimization (ISESO) was held on November 9th and 10th 2015 at the Heidelberg Institute for Theoretical Studies (HITS) and was organized by HITS, Heidelberg University and Karlsruhe Institute of Technology.

  20. Inorganic Crystal Structure Database (ICSD)

    Science.gov (United States)

    SRD 84 FIZ/NIST Inorganic Crystal Structure Database (ICSD) (PC database for purchase)   The Inorganic Crystal Structure Database (ICSD) is produced cooperatively by the Fachinformationszentrum Karlsruhe(FIZ) and the National Institute of Standards and Technology (NIST). The ICSD is a comprehensive collection of crystal structure data of inorganic compounds containing more than 140,000 entries and covering the literature from 1915 to the present.

  1. Design of price adjustment clauses in energy supply contracts in view of the latest decisions of the Federal Court of Justice; Gestaltung von Preisanpassungsklauseln in Waermeliefervertraegen im Lichte der juengsten BGH-Entscheidungen

    Energy Technology Data Exchange (ETDEWEB)

    Wollschlaeger, Stefan; Zorn, Regina [Kanzlei Becker Buettner Held, Berlin (Germany)

    2011-11-15

    In spring and summer of 2011, the Federal Court of Justices (Karlsruhe, Federal Republic of Germany) has dealt with the requirements on the structure of price adjustment clauses in heat supply contracts. Even if the court decisions still leave some issues unresolved, other issues now are resolved, or at least become clearer. The authors of the contribution under consideration report on these court decisions and their consequences for the contractual practice.

  2. A tribute to Stanislao Cannizzaro, chemical informationist and photochemist.

    Science.gov (United States)

    Roth, Heinz D

    2011-12-01

    Stanislao Cannizzaro is known widely for the Cannizzaro reaction, the "disproportionation" of benzaldehyde upon reaction with alkali, for his approach to teaching chemistry, "Sunto di un corso di filosofia chimica", which he presented at the Karlsruhe Congress of 1860, and for his work on the photochemistry of santonin. In Cannizzaro's laboratory two research associates, Giacomo Ciamician and Paul Silber, and a senior colleague, Emanuele Paternó, became acquainted with the basic methods of sunlight-inducd photochemistry.

  3. The 16th International Conference on X-ray Absorption Fine Structure (XAFS16)

    Science.gov (United States)

    Grunwaldt, J.-D.; Hagelstein, M.; Rothe, J.

    2016-05-01

    This preface of the proceedings volume of the 16th International Conference on X- ray Absorption Fine Structure (XAFS16) gives a glance on the five days of cutting-edge X-ray science which were held in Karlsruhe, Germany, August 23 - 28, 2015. In addition, several satellite meetings took place in Hamburg, Berlin and Stuttgart, a Sino-German workshop, three data analysis tutorials as well as special symposia on industrial catalysis and XFELs were held at the conference venue.

  4. Ein seltener Parasitoid der Wolfspinne Pardosa alacris (Araneae: Lycosidae: Ogcodes gibbosus (Diptera: Acroceridae

    Directory of Open Access Journals (Sweden)

    Langer, Günther

    2005-06-01

    Full Text Available The emerging of an acrocerid fly from an adult female of the wolf spider Pardosa alacris (C.L. Koch, 1833 was observed near Karlsruhe (Baden-Württemberg, Germany. This record supports previous results suggesting that acrocerids infect the spider's body, and not the egg sac. A short review of the life history of acrocerids and the development of their larvae is provided, casting doubt on the infection of spider cocoons by these parasitoids

  5. Vorwort

    OpenAIRE

    2014-01-01

    Die 28. Jahrestagung der Gesellschaft für Mineralstoffe und Spurenelemente e .V. (GMS) fand vom 11. bis 13. Oktober 2012 im Institut für Angewandte Biowissenschaften, Abteilung Lebensmittelchemie und Toxikologie, am Karlsruher Institut für Technologie (KIT) statt. Unter dem Motto „Nutzen-Risiko-Bewertung von Mineralstoffen und Spurenelementen: Biochemische, physikalische und toxikologische Aspekte“ sollte das Spannungsfeld zwischen positiven, aber auch - bei Überversorgung - möglichen nachtei...

  6. Generalized Phenomenological Cyclic Stress-Strain-Strength Characterization of Granular Media.

    Science.gov (United States)

    1984-09-02

    after Hettler et al., 1984) .............. 147 3.6 Stress-strain response for a cyclic axial compression test on loose Fuji River sand (after Tatsuoka...Karlsruhe sand at various confining pressures and at a relative density of 99% (after Hettler et. al., 1984) .............................. 197 3.27 Results...of axial compression tests on Dutch dune sand at various confining pressures and at a relative density of 60.9% (after Hettler et. al., 1984

  7. Revaporisation of fission product deposits in the primary circuit and its impact on accident source term

    OpenAIRE

    Bottomley, P.D.W.; Knebel, K.; Van Winckel, S.; Haste, T.; Souvi, S.M.O.; Auvinen, A; Kalilainen, J.; Kärkelä, T.

    2014-01-01

    Chemical revaporisation or physical resuspension of fission product deposits from the primary circuit is now recognised to be a major source term in the late phase of severe fuel degradation in a severe nuclear accident. These results come from tests carried out under different experimental projects in the European Commission (EC) Framework Programmes. These include the revaporisation tests carried out at the Transuranium Institute (ITU), Karlsruhe under the Fourth Framework Programme, the Ph...

  8. NMR methods for the investigation of structure and transport

    CERN Document Server

    Hardy, Edme H

    2011-01-01

    Methods of nuclear magnetic resonance (NMR) are increasingly applied in engineering sciences. The book summarizes research in the field of chemical and process engineering performed at the Karlsruhe Institute of Technology (KIT). Fundamentals of the methods are exposed for readers with an engineering background. Applications cover the fields of mechanical process engineering (filtration, solid-liquid separation, powder mixing, rheometry), chemical process engineering (trickle-bed reactor, ceramic sponges), bioprocess engineering (biofilm growth), and food process engineering (microwave heating

  9. Interaktiivsed muuseumid ja kunst Tallinnas : pühendatud Märt Väljataga, Anu Juuraku ja tundmatute autorite loomingule / Raivo Kelomees

    Index Scriptorium Estoniae

    Kelomees, Raivo, 1960-

    2000-01-01

    Kunsti meelelahutuslikkus. Maailma interaktiivse kunsti muuseumide (Tokyo ICC, Linzi Ars Electronica Center, Karlsruhe ZKM) eesmärk, mängulistest kunstiteostest nendes muuseumides. Interaktiivsete eksponaatidega Tervishoiumuuseum ning Tallinna tehnika- ja teaduskeskus. Märt Väljataga näitus 'Sada tuhat miljardit millenniumisonetti' Linnagaleriis Tallinnas. Anu Juuraku näitus 'Tsoon 2' Kunstihoones. A. Juuraku töö "Suflöör" ja Jeffrey Shaw töö "Loetav linn" võrdlus.

  10. $\\pi_[-}$-mass and vacuum polarization - a re-evalution.

    CERN Document Server

    Backenstoss, Gerhard; Koch, H; Poelz, G; Povel, H P; Schmitt, H; Tauscher, L; Von de Malsburg, C

    1973-01-01

    The pi /sup -/-mass and vacuum polarization measurements of the CERN- Karlsruhe-Heidelberg group were re-evaluated. The pi /sup -/-mass is found to be 139.569+or-0.008 MeV. A new value of the muonic neutrino rest mass is deduced to be m/sub nu //sup 2/=0.29+or-0.90 MeV/sup 2/. (13 refs).

  11. The KASCADE-grande experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bluemer, J; Apel, W D; Badea, F; Bekk, K; Bozdog, H; Daumiller, K; Doll, P; Engel, R; Engler, J [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Arteaga, J C; Cossavella, F; Souza, V de; Finger, M [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe (Germany); Bertaina, M; Chiavassa, A; Cantoni, E; Di Pierro, F [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Brancus, I M [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Brueggemann, M; Buchholz, P [Fachbereich Physik, Universitaet Siegen (Germany)], E-mail: Johannes.Bluemer@ik.fzk.de (and others)

    2008-07-15

    KASCADE-Grande is an extensive air shower array co-located with the original KASCADE air shower experiment at Forschungszentrum Karlsruhe, Germany. The multi-detector system allows to investigate the energy spectrum, composition, and anisotropies of cosmic rays in the energy range extended up to 10{sup 18} eV. An overview on the performance of the apparatus and first results are presented.

  12. KASCADE-Grande: a large acceptance, high-resolution cosmic-ray detector up to 10{sup 18} eV

    Energy Technology Data Exchange (ETDEWEB)

    Navarra, G. E-mail: navarra@to.infn.it; Antoni, T.; Apel, W.D.; Badea, F.; Bekk, K.; Bercuci, A.; Bertaina, M.; Bluemer, H.; Bozdog, H.; Brancus, I.M.; Brueggemann, M.; Buchholz, P.; Buettner, C.; Chiavassa, A.; Doll, P.; Engel, R.; Engler, J.; Fessler, F.; Ghia, P.L.; Gils, H.J.; Glasstetter, R.; Haungs, A.; Heck, D.; Hoerandel, J.R.; Iwan, A.; Kampert, K.-H.; Klages, H.O.; Kolotaev, Y.; Maier, G.; Mathes, H.J.; Mayer, H.J.; Milke, J.; Morello, C.; Mueller, M.; Obenland, R.; Oehlschlaeger, J.; Ostapchenko, S.; Petcu, M.; Plewnia, S.; Rebel, H.; Roth, M.; Schieler, H.; Scholz, J.; Thouw, T.; Trinchero, G.C.; Ulrich, H.; Valchierotti, S.; Buren, J. van; Walkowiak, W.; Weindl, A.; Wochele, J.; Zabierowski, J.; Zagromski, S

    2004-02-01

    We describe the main features of the extensive air-shower array devoted to the study of cosmic-ray primaries and their interactions at primary energies 10 PeV-1 EeV which is starting operation at Forschungszentrum Karlsruhe. It exploits the existing KASCADE multi-detector facilities, and two new detectors: Grande and Piccolo, with the respective aims of providing a large acceptance area (0.5 km{sup 2}) and a prompt trigger signal.

  13. Macroeconomic potentials of intelligent networks in Germany. Abstract; Gesamtwirtschaftliche Potenziale intelligenter Netze in Deutschland. Kurzfassung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Within the contribution under consideration the Fraunhofer Institute for Systems and Innovation Research ISI (Karlsruhe, Federal Republic of Germany) determines the total economic effects of intelligent networks for the German economy. For the first time, the contributions of the different areas (energy, health, traffic, education, administration) are shown detailed. On the whole, it arises a societal total benefit of intelligent networks of 55.7 billion Euro per year.

  14. Uncertainty analysis of complex hydro-biogeochemical models

    OpenAIRE

    Houska, Tobias

    2017-01-01

    This thesis is about complex hydro-biogeochemical models and their practical applications. Several modelling practices and their associated uncertainty are investigated in this joined project of the working groups of Prof. Dr. Lutz Breuer, Justus Liebig University Giessen, and Prof. Dr. Klaus Butterbach-Bahl at Karlsruhe Institute of Technology. The aim of the project is to develop strategies for reducing the climate footprint of agricultural production and to quantify uncertainties of model-...

  15. No Sense in Dwelling on the Past?: The Fate of the US Air Force’s German Air Force Monograph Project, 1952-69

    Science.gov (United States)

    2011-04-01

    and possi- bly the Iberian , Italian, and Jutland peninsulas. Following a strategic nuclear air campaign against the Soviet Union, Allied forces...closure of the Air Force Historical Division’s Karlsruhe office. 70. Wolfe , Captured Germans and Related Records, 86. 71. For a detailed treatment...Papers and Proceedings of the Conference on Captured German and Re- lated Records, November 12–13, 1968, edited by Robert Wolfe , 73–91. Athens, OH

  16. Continuous high-temperature recycling of waste by the Thermoselect process; Unterbrechungsloses Hochtemperaturrecycling - Abfallveredelung durch Thermoselect

    Energy Technology Data Exchange (ETDEWEB)

    Stahlberg, R. [Thermoselect Engineering S.r.l., Verbania (Italy)

    1998-09-01

    Based on the experience with the Thermoselect plant at Fondotoce, Italy (100 Mg/d), which was commissioned in 1992, a 225,000 Mg/a plant with three units (720 Mg/d) is being constructed at Karlsruhe, Germany. The plant is scheduled for commissioning in 1998. The contribution presents the product balance, the approved emission levels, and the energy uses envisaged for the Karlsruhe project. Final product quality data and energy yields illustrate the differences from conventional thermal processes. An ecobalance comparing the Thermoselect process with grate furnaces shows that water, soil and air pollution is much reduced by the new Termoselect process. Apart from high product quality, the plant also has the advantage of reduced dumping cost and no long-term ecological hazards. (orig./SR) [Deutsch] Auf Basis der grosstechnischen Erfahrung mit einer seit 1992 in Fondotoce (Italien) betriebenen THERMOSELECT-Anlage (Kapazitaet 100 Mg/d), Restmuell umweltgerecht zu behandeln, wird 1998 der Aufbau einer 225.000 Mg/a-Anlage mit 3 Linien (720 Mg/d) in Karlsruhe (Deutschland) abgeschlossen. Die Produktebilanz und die genehmigten Emissionswerte sind in dem Artikel belegt. Gezeigt wird die fuer das Projekt Karlsruhe vorgesehene Energienutzung. Die Endprodduktqualitaeten und die Energieausbeute verdeutlichen die Unterschiede zu bisherigen konventionellen thermischen Verfahren. Eine erarbeitete Oekobilanz mit einem Vergleich von THERMOSELECT und Rostfeuerung zeigt die deutlich geringe Belastung der Umweltkompartimente Wasser, Boden und Luft durch das neue THERMOSELECT-Verfahren. Neben hohen Produktqualitaeten wird - verglichen mit traditionellen Techniken - ein deutlich verringerter Entsorgungspreis erreicht, wobei gleichzeitig oekologische Belastungen auszuschliessen sind. (orig./SR)

  17. THEREDA. Thermodynamic reference data base. Phase II. Release of thermodynamic data. Summary and final report; THEREDA. Thermodynamische Referenz-Datenbasis. Phase II. Freigabe thermodynamischer Daten. Zusammenfassung der Abschlussberichte

    Energy Technology Data Exchange (ETDEWEB)

    Altmaier, Marcus; Gaona, Xavier; Marquardt, Christian; Montoya, Vanessa [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Institut fuer Nukleare Entsorgung; Bok, Frank; Richter, Anke [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Inst. of Resource Ecology; Moog, Helge C.; Scharge, Tina [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), Koeln (Germany); Voigt, Wolfgang [Technische Univ. Bergakademie Freiberg (Germany); Wilhelm, Stefan [AF Consult AG, Baden-Daettwil (Switzerland)

    2015-12-15

    The final report on the thermodynamic reference data base THEREDA covers the following issues: project management, quality management (Helmholtz-Zentrum Dresden-Rossendorf HZDR and GRS), data base interfaces, documentation, uranium (HZDR), other nuclides (Karlsruhe Institute for technology, KIT), data for cement minerals and their reaction products (AF-Consult, GRS), phosphate (GRS), systems with CO2 and carbonate at variable temperatures and pressure (Bergakademie Freiberg, TUBAF).

  18. 2015 Annual Meeting of the German Gesellschaft für Arbeitswissenschaft

    CERN Document Server

    Stock, Patricia; Bruder, Ralph; Schlick, Christopher

    2016-01-01

    These proceedings summarize the best papers in each research area represented at the 2015 Annual Meeting of the German Gesellschaft für Arbeitswissenschaft, held at Karlsruhe Institute of Technology (KIT) from February 26-28. The meeting featured more than 160 presentations and 30 posters reflecting the diversity of subject matter in the field of human and industrial engineering.

  19. The nuclear waste disaster. A view behind the curtain of the presumably clean nuclear power; Das Atommuell-Desaster. Blicke hinter die Kulissen der angeblich sauberen Atomenergie

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, Julia; Simon, Armin; Stay, Jochen (comps.)

    2015-04-15

    The brochure on the nuclear waste disaster - a view behind the curtain of the presumably clean nuclear power discusses the following topics: Thuringia and Saxony - radiating landscapes, Gronau - 100.000 tons for eternity, Gundremmingen - nuclear waste records and castor shortage, Brunsbuettel - castor storage facility without licensing, Juelich the pebble bed drama, Karlsruhe - the hall is filled, Obrigheim - radioactive waste for cooking pots, Asse - the ticking bomb, final repositories - an illusion without solution, stop the waste production, Germany - endless nuclear waste.

  20. Proceedings of the 10{sup th} IEA international workshop on beryllium technology

    Energy Technology Data Exchange (ETDEWEB)

    Vladimirov, P.; Reimann, J. (eds.)

    2013-07-01

    The 10{sup th} IEA Beryllium Workshop (BeWS-10) was organized by the Karlsruhe Institute of Technology (KIT) with participants from Europe, U.S.A., Russia, Japan, and Kazakhstan. The main topics of the 30 papers in the proceedings are: the overview of the Be-related activities in Europe, U.S.A., RF, and Japan, results on the Be irradiation program HIDOBE-01, beryllide intermetallic compounds, technology and safety issues, and modeling of the Be radiation resistance.

  1. Diana Reference Manual. Revision 3,

    Science.gov (United States)

    1983-02-28

    private -To be filled in... ead Diana ; External Representation of DIANA Page 145 CHAPTER 5 EXTERNAL REPRESENTATION OF DIANA This chapter describes how a...1 1 mml L.~ 2 .i i .- . .... c7- 0/0 04 TARTAN LABORATOR4IES *dOORPORATED 00 N DIANA REFERENCE MANUAL Revision 3 Arthur Evans Jr. MCC Kenneth J...Butler Tartan Laboratories Incorporated Editors. Revised Diana Reference Manual G0. GOOD Inatitut fuer Informatik 11. Universitmet Karlsruhe Win. A. Wuif

  2. At R407/R408

    CERN Multimedia

    1974-01-01

    R407/R408 were experiments designed by the CERN-Collège de France-Heidelberg-Karlsruhe Collaboration to study two-particle correlations in the fragmentation region requiring a large transverse momentum particle in the forward direction. Atmospheric pressure Cerenkov counters were part of the additional equipment set up during 1974 at the SFM facility. Here Paul Hanke multi-reflected on Cerenkov mirrors.

  3. Natural and anthropogenic environmental hazards. Research results of the Department of Applied Geology; Natuerliche und anthropogene Umweltgefaehrdungen. Forschungsergebnisse aus dem Lehrstuhl fuer Angewandte Geologie

    Energy Technology Data Exchange (ETDEWEB)

    Czurda, K.; Eiswirth, M.; Hoetzl, H. [comps.

    1998-12-31

    Applied geology is employed in mining geology, raw materials geology, engineering geology, and hydrogeology, of which the two last-mentioned are the most important for the Department of Applied Geology. This series of publications arose from the need of making research findings, dissertations, theses and conference papers accessible to the public faster and more comprehensively than in national and international journals. [Deutsch] Die Aufgaben der angewandten Geologie sind im weitesten Sinne in der Montangeologie, in der Rohstoffgeologie, in der Ingenieurgeologie und in der Hydrogeologie zu sehen. Der engere Aufgabenbereich der Institute fuer Angewandte Geologie konzentriert sich der heutigen Fragestellung entsprechend meist auf die Ingenieurgeologie und Hydrogeologie. Wenn wir daraus noch die Umweltgeologie ableiten, so ist der Lehr- und Forschungsschwerpunkt auch des Karlsruher Lehrstuhles fuer Angewandte Geologie (AGK=Angewandte Geologie Karlsruhe) umrissen. Die vorliegende Schriftenreihe ist aus der Notwendigkeit entstanden, Forschungsergebnisse, Dissertationen und ausgewaehlte Diplomarbeiten sowie Beitraege einschlaegiger Tagungen in Karlsruhe rascher und u.U. umfangreicher als in internationalen oder nationalen Journalen moeglich zu publizieren. (orig.)

  4. ITIL and Grid services at GridKa

    Energy Technology Data Exchange (ETDEWEB)

    Marten, H; Koenig, T, E-mail: holger.marten@kit.ed, E-mail: tobias.koenig@kit.ed [Karlsruhe Institute of Technology, Forschungszentrum Karlsruhe GmbH Steinbuch Centre for Computing Herman-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2010-04-01

    The Steinbuch Centre for Computing (SCC) is a new organizational unit of the Karlsruhe Institute of Technology (KIT). Founded in February 2008 as a merger of the previous Institute for Scientific Computing of Forschungszentrum Karlsruhe and the Computing Centre of the Technical University Karlsruhe, SCC provides a broad spectrum of IT services for 8.000 employees and 18.000 students and carries out research and development in key areas of information technology under the same roof. SCC is also known to host the German WLCG [1] Tier-1 centre GridKa. In order to accompany the merging of the two existing computing centres located at a distance of about 10 km and to provide common first class services for science, SCC has selected the IT service management according to the industrial quasi-standard 'IT Infrastructure Library (ITIL)' [3] as a strategic element. The paper discusses the implementation of a few ITIL key components from the perspective of a Scientific Computing Centre using examples of Grid services at GridKa.

  5. ITIL and Grid services at GridKa

    Science.gov (United States)

    Marten, H.; Koenig, T.

    2010-04-01

    The Steinbuch Centre for Computing (SCC) is a new organizational unit of the Karlsruhe Institute of Technology (KIT). Founded in February 2008 as a merger of the previous Institute for Scientific Computing of Forschungszentrum Karlsruhe and the Computing Centre of the Technical University Karlsruhe, SCC provides a broad spectrum of IT services for 8.000 employees and 18.000 students and carries out research and development in key areas of information technology under the same roof. SCC is also known to host the German WLCG [1] Tier-1 centre GridKa. In order to accompany the merging of the two existing computing centres located at a distance of about 10 km and to provide common first class services for science, SCC has selected the IT service management according to the industrial quasi-standard "IT Infrastructure Library (ITIL)" [3] as a strategic element. The paper discusses the implementation of a few ITIL key components from the perspective of a Scientific Computing Centre using examples of Grid services at GridKa.

  6. PREFACE: International Conference on Magnetism (ICM 2009)

    Science.gov (United States)

    Goll, Gernot; Löhneysen, Hilbert v.; Loidl, Alois; Pruschke, Thomas; Richter, Manuel; Schultz, Ludwig; Sürgers, Christoph; Wosnitza, Jochen

    2010-11-01

    The International Conference on Magnetism 2009 (ICM 2009) was held in Karlsruhe, Germany, from 26-31 July 2009. Previous conferences in this series were organized in Edingburgh, United Kingdom (1991), Warsaw, Poland (1994), Cairns, Australia (1997), Recife, Brazil (2000), Rome, Italy (2003) and Kyoto, Japan (2006). As with previous ICM conferences, the annual Conference on Strongly Correlated Electron Systems (SCES) was integrated into ICM 2009. Conference photograph Participants of ICM 2009 in front of the Stadthalle Karlsruhe. Topics of ICM 2009 were: Strongly Correlated Electron Systems; Quantum and Classical Spin Systems; Magnetic Structures and Interactions; Magnetization Dynamics and Micromagnetics; Spin-Dependent Transport; Spin Electronics; Magnetic Thin Films, Particles, and Nanostructures; Soft and Hard Magnetic Materials and their Applications; Novel Materials and Device Applications; Magnetic Recording and Memories; Measuring Techniques and Instrumentation, as well as Interdisciplinary Topics. We are grateful to the International Advisory Committee for their help in putting up an attractive program encompassing practically all aspects of magnetism, both experimentally and theoretically. The program committee comprised A Loidl, Germany (Chair), M A Continentino, Brazil, D E Dahlberg, USA, D Givord, France, G Güntherodt, Germany, H Mikeska, Germany, D Kaczorowski, Poland, Ching-Ray Chang, South Korea, I Mertig, Germany, D Vollhardt, Germany and E F Wassermann, Germany was also head of the National Organizing Committee. His help is gratefully acknowledged. Photographs Left: Poster session in the Stadthalle Karlsruhe. Upper right: H v Löhneysen (Conference Chairman), Nobel Laureates A Fert and P. Grünberg, E Umbach (Chairman of the Executive Board of Forschungszentrum Karlsruhe) (left to right). Lower right: Nobel Laureate P W Anderson. The scientific program started on Monday 27 July 2009 with opening addresses by the Conference Chairman, the deputy

  7. KVK - a Meta Catalog of Libraries

    Directory of Open Access Journals (Sweden)

    Michael W. Mönnich

    2001-07-01

    Full Text Available Over the past years, the majority of libraries worldwide implemented interfaces to allow users to access to their bibliographic databases through the WWW. Usually these interfaces consist of HTML-pages with an embedded FORMS template where the search terms are entered. Thus for the first time it was made possible for the user to access almost every library using only one software: the WWW browser. However, if the user has to search more than one library catalog, e.g. when searching literature for a PhD thesis, he has to access a multitude of catalogs deal with different search forms, different search syntaxes, wildcards etc. This is the case especially for users in Germany. Faced with this situation in 1996, our team at the university library of Karlsruhe came up with the idea to create a virtual catalog enabling our library patrons to search several catalogs simultaneously. The idea was inspired by the successful introduction of meta search engines like metacrawler which perform the same function with internet search engines. So why not try to do it with library catalogs? The idea was discussed, and with support from the faculty of computer science, a prototype was built in July 1996. It proved surprisingly easy to do, so we included not only union catalogs but also bookshops. The meta catalog showed so much potential that we decided not to limit access to our local library patrons but to offer it as a service to the internet community as Karlsruher Virtueller Katalog (KVK, Karlsruhe Virtual Catalog. Once the KVK was announced in several mailing list, the usage peaked within a few weeks and has continued to do so.

  8. Influence of filling pattern structure on synchrotron radiation and beam spectrum at ANKA

    Energy Technology Data Exchange (ETDEWEB)

    Steinmann, Johannes; Brosi, Miriam; Bruendermann, Erik; Caselle, Michele; Blomley, Edmund; Hiller, Nicole; Kehrer, Benjamin; Mueller, Anke-Susanne; Schoenfeldt, Patrik; Schuh, Marcel; Schwarz, Markus; Siegel, Michael [Karlsruher Institut fuer Technologie, Karlsruhe (Germany)

    2016-07-01

    We present the effects of the filling pattern structure in multi-bunch mode on the beam spectrum. This effects can be seen by all detectors whose resolution is better than the RF frequency, ranging from stripline and Schottky measurements to high resolution synchrotron radiation measurements. Our heterodyne measurements of the emitted coherent synchrotron radiation at 270 GHz reveal the discrete frequency harmonics around the 100'000 revolution harmonic of ANKA, the synchrotron radiation facility in Karlsruhe, Germany. Significant effects of bunch spacing, gaps between bunch trains and variations in individual bunch currents on the emitted CSR spectrum are described by theory and supported by observations.

  9. Connected, low-cost point-of-care diagnostics for rural South African clinics

    CSIR Research Space (South Africa)

    Smith, Suzanne

    2017-10-01

    Full Text Available -OF-CARE DIAGNOSTICS FOR RURAL SOUTH AFRICAN CLINICS Suzanne Smith 1,2 , Kevin Land 1 , Jan G. Korvink 2 and Dario Mager 2 1 Council for Scientific and Industrial Research, South Africa and 2 Karlsruhe Institute of Technology, Germany ABSTRACT In rural...,2]. In addition, the ASSURED criteria [3] set out by the World Health Organization for the development of new POC diagnostic tools need to be taken into consideration. In South African rural clinics, poor quality management systems, supply chain management...

  10. Better learn to like it

    OpenAIRE

    Klonner, Stefan

    2012-01-01

    China und Indien sind sowohl wirtschaftlich als auch politisch die wichtigen Märkte und Akteure der Zukunft, meint Stefan Klonner, der auf dem Gebiet der Entwicklungsökonomie forscht. Campus-Report" heißt die Radiosendung der Universitäten Heidelberg, Mannheim, Karlsruhe und Freiburg. Die Reportagen über aktuelle Themen aus Forschung und Wissenschaft werden montags bis freitags jeweils um ca. 19.10h im Programm von Radio Regenbogen gesendet. (Empfang in Nordbaden: UKW 102,8. In Mittelbade...

  11. Offer of service from municipal control in Germany; L'offre de services des regies municipales en Allemagne

    Energy Technology Data Exchange (ETDEWEB)

    Jamin, D.

    1997-07-01

    In Germany, the rules broaden their offer in the prospect of easing trade restrictions. The trends are summarized in three examples: The Stuttgart control makes an offer of optimisation in the energy distribution to the municipal buildings, but it is particularly active in the field of liquefied natural gas; the Karlsruhe control develops the council to customers and considers the sale of heat. the Hanover control prefers the communication and has created a label to develop its offers of service: EnerCity. (N.C.)

  12. Integral test of JENDL fusion file

    Energy Technology Data Exchange (ETDEWEB)

    Maekawa, Fujio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-03-01

    Integral test of JENDL Fusion File (J-FF) is performed through analyses of available benchmark experiments. As a result, good agreement between the calculated results with J-FF and the measured data is observed as a whole. Thus, J-FF is qualified to be used for nuclear design of fusion reactors. Owing to the high quality evaluation of J-FF, cross section data in J-FF for many nuclides are recommended to be assigned as data in FENDL/E-2.0 in the IAEA Consultants` Meeting held at Karlsruhe, Germany, 24-28 June, 1996. (author)

  13. Temperature dependence of fission product release rates

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, J.L.; McGown, M.E.; Reynolds, A.B.

    1984-10-01

    Fission product fractional release rates, K, used in the Albrecht-Wild model and measured at Kernforschungszentrum Karlsruhe and Oak Ridge National Laboratory can be fitted well by a single straight line for each fission product over the entire temperature range of the data when in K is plotted as a function of 1/T. Past applications of the Albrecht-Wild model have used plots of ln K versus T, which required three fits over the temperature range. Thus it is suggested that fractional release rates be represented by the Arrhenius form, K = K /SUB o/ exp(-Q/RT).

  14. Generation IV: new reactor systems; Neue Reaktorsysteme innerhalb der Generation IV Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Starflinger, J.; Schulenberg, T. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). IKET; Hofmeister, J. [RWE Power AG, Regenerative Stromerzeugung, Essen (Germany); Tromm, W. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Programm Nukleare Sicherheitsforschung

    2006-07-01

    Generation IV, an initiative for international cooperation in nuclear technology, was launched by 10 states in 2000 and joined by Euratom in July 2003. Its aim is to assess nuclear energy systems complying with future safety, disposal, proliferation, and public acceptance requirements. The Forschungszentrum Karlsruhe focuses on design, thermohydraulics, and neutron kinetics. Work is mainly devoted to the high-performance light water reactor (HPLWR) with supercritical steam conditions. Thus, competence can be maintained, as the HPLWR issues qualify for later work in nuclear industry. (orig.)

  15. Analysis of the porosity distribution of mixed oxide pins; Analisis de distribucion de porosidad en barras combustibles de oxidos mixtos bajo irradiacion

    Energy Technology Data Exchange (ETDEWEB)

    Lieblich, M.; Lopez, J.

    1987-07-01

    In the frame of the Joint Irradiation Program IVO-FR2-Vg7 between the Centre of Nuclear Research of Karlsruhe (KfK), the irradiation of 30 mixed-oxide fuel rods in the FR2 experimental reactor was carried out. The pins were located in 10 single-walled NaK capsules. The behaviour of the fuel during its burnup was studied, mainly, the rest-porosity and cracking distribution in the pellet, partial densification, etc. In this work 3 pins from the capsule No. 165 were analyzed. The experimental results (pore and cracking profiles) were interpreted by the fuel rod code SATURN. (Author) 20 refs.

  16. [Plastic micro-tips for drug delivery].

    Science.gov (United States)

    Muslija, A; Guber, A E; Heckele, M; Herrmann, D; Pfleging, W; Schaller, Th

    2002-01-01

    Removal or exact transfer of minimum substance volumes from reservoirs or microfluidic systems may be accomplished by means of miniaturized tips with integrated through-going capillaries. Applications in biomedical engineering, e.g. for the application of drugs, or in life sciences, e.g. equipping of microarrays, require the use of disposable plastic products for hygienic reasons and reasons of costs. For this purpose, a method to fabricate microtips out of plastic by doublesided molding has been developed at the Forschungszentrum Karlsruhe.

  17. Co-sintering of treated APC-residues with bottom ash

    DEFF Research Database (Denmark)

    Bergfeldt, B.; Jensen, Dorthe Lærke; Vehlow, J.

    2001-01-01

    Air pollution control residues stabilised by means of the Ferrox process can be sager disposed of due to lower contents of soluble salts and lesssoluble heavy metals stabilised in iron oxides. Co-combustion tests in the Karlsruhe test incinerator TAMARA were carried out in order to investigate...... the influence of co-sintering of Ferrox products with bottom ashes on the quality of the residues and the effects on the combustion process. Only few elements showed higher concentrations in the bottom ashes of these co-combustion tests compared to reference tests. No significant effect on the leaching...

  18. A Critical Analysis and Assessment of High Power Switches

    Science.gov (United States)

    1978-09-01

    4] H. L. Laquer , et.al., "Superconducting Magnetic Energy Storage and Transfer," LASL Rept. LA-DC-72-470. [5] H. L. Laquer , et.al., Proc. 6th...Intersoc. Energy Con- version Eng. Conf., Boston, Mass., August 3-6, 1971, p. 1089. [6] H. L. Laquer , et.al., "Design Cptions and Trade-offs in...Conf. on Magnet Technology (Interner Bericht 75-81-MAG, April 1975, Kernforschungs- zentrum Karlsruhe). 398 (13] H. Laquer , et.al., "Superconductive

  19. Laser-induced ignition and combustion in a SI engine with direct injection; Laserzuendung und Verbrennung im Ottomotor mit Direkteinspritzung

    Energy Technology Data Exchange (ETDEWEB)

    Gross, Volker; Kubach, Heiko; Spicher, Ulrich [Karlsruher Institut fuer Technologie, Karlsruhe (Germany). Inst. fuer Kolbenmaschinen; Schiessl, Robert; Maas, Ulrich [Karlsruher Institut fuer Technologie, Karlsruhe (Germany). Inst. fuer Technische Thermodynamik

    2010-07-15

    Laser-induced ignition has shown huge advantages for the combustion of lean air- fuel mixtures in SI engines. A research project founded by the FVV under 'DI Laserzuendung' and No. 928 was set up at the Institute for Reciprocating Engines (IFKM) and the Institute for Technical Thermodynamics (ITT) at the Karlsruhe Institute of Technology (KIT) to investigate the potential of the laser-induced ignition. The emphasis was on improving combustion initiation and heat release during a direct injection with a spray-guided combustion. (orig.)

  20. First results of the air shower experiment KASCADE

    Energy Technology Data Exchange (ETDEWEB)

    Haungs, A. E-mail: haungs@ik3.fzk.de; Antonia, T.; Apel, W.D.; Badea, F.; Bekk, K.; Bernloehr, K.; Bluemer, H.; Bollmann, E.; Bozdog, H.; Brancus, I.M.; Buettner, C.; Chilingarian, A.; Daumiller, K.; Dolla, P.; Engler, J.; Fessler, F.; Gils, H.J.; Glasstetter, R.; Haeusler, R.; Hafemann, W.; Heck, H.; Hoerandel, J.R.; Holst, T.; Kampert, K.-H.; Keim, H.; Kempa, J.; Klages, H.O.; Knapp, J.; Martello, D.; Mathes, H.J.; Matussek, P.; Mayer, H.J.; Milke, J.; Muehlenberg, D.; Oehlschlaeger, J.; Pectu, M.; Rebel, H.; Risse, M.; Roth, M.; Schatz, G.; Schimdt, F.K.; Thouw, T.; Ulrich, H.; Vardanyan, A.; Vulpescu, B.; Weber, J.H.; Wentz, J.; Wiegert, T.; Wochele, J.; Zabierowski, J.; Zagromski, S

    2000-06-01

    The main goals of the KASCADE (KArlsruhe Shower Core and Array DEtector) experiment are the determination of the energy spectrum and elemental composition of the charged cosmic rays in the energy range around the knee at {approx} 5 PeV. Due to the large number of measured observables per single shower a variety of different approaches are applied to the data, preferably on an event-by-event basis. First results are presented and the influence of the high-energy interaction models underlying the analyses is discussed.

  1. Air shower radio detection with LOPES

    Energy Technology Data Exchange (ETDEWEB)

    Bluemer, J; Apel, W D; Arteaga, J C; Badea, F; Bekk, K; Bozdog, H; Daumiller, K [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Asch, T [Inst. Prozessdatenverarbeitung und Elektronik, Forschungszentrum Karlsruhe (Germany); Auffenberg, J [Fachbereich Physik, Universitaet Wuppertal (Germany); Baehren, L; Butcher, H [ASTRON, Dwingeloo (Netherlands); Bertaina, M; Chiavassa, A [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Biermann, P L [Max-Planck-Institut fuer Radioastronomie Bonn (Germany); Brancus, I M [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Brueggemann, M; Buchholz, P [Fachbereich Physik, Universitaet Siegen (Germany); Buitink, S [Department of Astrophysics, Radboud University Nijmegen (Netherlands); Cossavella, F; Souza, V de [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe (Germany)], E-mail: Johannes.Bluemer@ik.fzk.de (and others)

    2008-07-15

    LOPES is an array of 30 radio antenna co-located with the KASCADE-Grande extensive air shower detector in Karlsruhe, Germany. It is designed as a digital radio interferometer for the detection of radio emission from extensive air showers. LOPES features high bandwidth and fast data processing. A unique asset is the concurrent operation with KASCADE-Grande. We report about the progress in understanding the radio signals measured by LOPES. In addition, the status and further perspectives of LOPES and the large scale application of this novel detection technique are sketched.

  2. The Air-Shower Experiment KASCADE-Grande

    Energy Technology Data Exchange (ETDEWEB)

    Haungs, A., E-mail: haungs@ik.fzk.d [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Apel, W.D. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Arteaga, J.C. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Badea, F.; Bekk, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Bluemer, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Bozdog, H. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, P.O. Box Mg-6, RO-7690 Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen, 57068 Siegen (Germany); Cantoni, E. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Istituto di Fisica dello Spazio Interplanetario, INAF, 10133 Torino (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Daumiller, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Souza, V. de [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Di Pierro, F. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Doll, P.; Engel, R.; Engler, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany)

    2009-12-15

    KASCADE-Grande is an extensive air shower experiment at the Forschungszentrum Karlsruhe, Germany. Main parts of the experiment are the Grande array spread over an area of 700x700m{sup 2}, the original KASCADE array covering 200x200m{sup 2} with unshielded and shielded detectors, and additional muon tracking devices. This multi-detector system allows to investigate the energy spectrum, composition, and anisotropies of cosmic rays in the energy range up to 1 EeV. An overview on the performance of the apparatus and first results will be given.

  3. Recent results of the LOPES experiment

    Energy Technology Data Exchange (ETDEWEB)

    Haungs, A., E-mail: haungs@ik.fzk.d [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Apel, W.D. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Arteaga, J.C. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Asch, T. [Inst. Prozessdatenverarb. und Elektronik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Badea, F. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Baehren, L. [Dept. of Astrophysics, Radboud University Nijmegen, 6525 ED Nijmegen (Netherlands); Bekk, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie, 53010 Bonn (Germany); Bluemer, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Bozdog, H. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, P.O. Box Mg-6, RO-7690 Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen, 57068 Siegen (Germany); Buitink, S. [Dept. of Astrophysics, Radboud University Nijmegen, 6525 ED Nijmegen (Netherlands); Cantoni, E. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Istituto di Fisica dello Spazio Interplanetario, INAF, 10133 Torino (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Daumiller, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany)

    2009-12-15

    LOPES measures radio pulses from extensive air showers and aims to calibrate the emitted signal in the primary energy range of 10{sup 16}-10{sup 18} eV. LOPES, a digital radio interferometer using high bandwidths and fast data processing, is set up at the location of the KASCADE-Grande extensive air shower experiment in Karlsruhe, Germany and profits from the reconstructed air shower observables of KASCADE-Grande. We report about recent analysis results of the radio signals measured by LOPES.

  4. Preliminary test of the prototype modular cryostat for a 10 MW offshore superconducting wind turbine

    Science.gov (United States)

    Sun, Jiuce; Ramalingam, R.; Sanz, Santiago; Neumann, Holger

    2017-02-01

    The SUPerconducting Reliable lightweight And more POWERful offshore wind turbine (SUPRAPOWER), an EU FP7 funded research project, are under development for an innovative superconducting 10 MW class offshore wind turbine. Due to the requirements of handling, maintenance, reliability of long term and offshore operation, the cryostats are divided in two major parts: the modular cryostat able to accommodate a single coil and a thermal collector that links all the modules. The prototype modular cryostat was designed, manufactured and assembled in Karlsruhe Institute of Technology (KIT). The paper reports preliminary test results of proto-type modular cryostat with a two-stage Gifford-McMahon (GM) cryocooler.

  5. Simulation of the convective mixed layer in Athens

    Energy Technology Data Exchange (ETDEWEB)

    Frank, H.P. [Risoe National Lab., Roskilde (Denmark)

    1997-10-01

    The region of Athens, Greece, has a highly complicated terrain with irregular coastline and mountains next to the sea. This results in complex flow fields. A case study of a simulation of a sea breeze with the Karlsruhe Atmospheric Mesoscale model KAMM is presented together with remarks on the advection of mixed layer air. The valley of Athens is open to the sea towards the south-west and surrounded by mountains on the other sides. Gaps between the mountains channel the flow into the valley. Simulations were done for 14 September 1994 to compare them with measurements at 6 masts by Risoe during the MEDCAPHOT-TRACE experiment. (au)

  6. International Symposium on Acoustic Remote Sensing of the Atmosphere and Oceans (2nd).

    Science.gov (United States)

    1983-09-26

    Canada 6 7 Italy 6 5 Japan 4 1 France 3 5 Hong Kong 3 2 Australia 1 2 Greece 1 2 India 1 2 Poland 1 1 South Africa I 1 Sweden 1 0 West Germany 1 I...395 Pretoria 0001, SOUTH AFRICA Doppler Acoustic Sounding Per- P. Thomas Kernforschungszentrum formance Test R. von Karlsruhe Ombli Holleuffer-Kypke...the Austral - M. Kanowski erating Board ian Continent P.T. Morland Brisbane, AUSTRALIA L. StUmer Comparison of Mixing Height Ob- Royal Observatory

  7. Monitoring the KATRIN source properties within the beamline

    Science.gov (United States)

    Ellinger, E.; Haußmann, N.; Helbing, K.; Hickford, S.; Klein, M.; Naumann, U.

    2017-09-01

    The KArlsruhe TRItium Neutrino (KATRIN) experiment will measure the mass of the neutrino with a sensitivity of 0.2 eV (90 % CL). The Forward Beam Monitor (FBM) is a monitoring system which comprises of a complex mechanical setup capable of inserting a detector board into the KATRIN beamline at the end of the source and transport section. The detector board contains a Hall sensor, a temperature gauge, and two PIN diodes which can detect electrons from the source with a precision of 0.1 % in less than a minute within an electron flux density of 106 s-1mm-2.

  8. CFN lectures on functional nanostructures

    CERN Document Server

    Vojta, Matthias; Schön, Gerd

    2011-01-01

    This series of books contains selected and edited lectures from summer schools organized by the Center for Functional nanostructures (C.F.N.) at the University of Karlsruhe. The mission of the C.F.N. is to carry out research in the following areas: nanophotonics, nanoelectronics, molecular nanostructures and nanostructured materials. The aim of the summer schools is mainly to exchange new ideas and illustrate emerging research methodologies through a series of topical, introductory lectures. This is reflected by both the selection of topics addressed in the present volume, nanoelectronics, as well as the tutorial aspect of the contributions.

  9. 3D ultrasound computer tomography for medical imaging

    Energy Technology Data Exchange (ETDEWEB)

    Gemmeke, H. [Forschungszentrum Karlsruhe, Institute for Data Processing and Electronics, P.O. Box 3640, 76021 Karlsruhe (Germany)], E-mail: hartmut.gemmeke@ipe.fzk.de; Ruiter, N.V. [Forschungszentrum Karlsruhe, Institute for Data Processing and Electronics, P.O. Box 3640, 76021 Karlsruhe (Germany)

    2007-10-01

    Our 3D ultrasound computer tomograph (USCT) is an device method aimed at early breast cancer diagnosis. It is capable of producing images with sub-millimeter resolution and high signal-to-noise ratio. This method is universally useable for the 3D analysis of sufficient small bodies similar to the size of a breast, which may be immersed in a liquid coupling medium. In this paper, an overview of the developed method and the first results for static test examples (phantoms) and the perspective of our 3D-USCT at Forschungszentrum Karlsruhe are presented.

  10. Subjective heat stress of urban citizens: influencing factors and coping strategies

    Science.gov (United States)

    Kunz-Plapp, Tina; Hackenbruch, Julia; Schipper, Hans

    2014-05-01

    Given urbanization trend and a higher probability of heat waves in Europe, heat discomfort or heat stress for the population in cities is a growing concern that is addressed from various perspectives, such as urban micro climate, urban and spatial planning, human health, work performance and economic impacts. This presentation focuses on subjective heat stress experienced by urban citizens. In order to better understand individual subjective heat stress of urban citizens and how different measures to cope with heat stress in everyday life are applied, a questionnaire survey was conducted in Karlsruhe, Germany. Karlsruhe is located in one of the warmest regions in Germany and holds the German temperature record of 40.2°C in August 2003. In 2013, two hot weather periods with continuous heat warnings by the German Weather Service for 7 and 8 days occurred during the last 10 days of July and first 10 days of August 2013 with an inofficial maximum temperature of again 40.2°C on July 27th in Karlsruhe (not taken by the official network of the German Weather Service). The survey data was collected in the six weeks after the heat using an online-questionnaire on the website of the South German Climate Office that was announced via newspapers and social media channels to reach a wide audience in Karlsruhe. The questionnaire was additionally sent as paper version to groups of senior citizens to ensure having enough respondents from this heat sensitive social group in the sample. The 428 respondents aged 17-94 show differences in subjective heat stress experienced at home, at work and during various typical activities in daily routine. They differ also in the measures they used to adjust to and cope with the heat such as drinking more, evading the heat, seeking cooler places, changing daily routines, or use of air condition. Differences in heat stress can be explained by housing type, age, subjective health status, employment, and different coping measures and strategies

  11. Mathematical efficiency calibration in gamma spectroscopy

    CERN Document Server

    Kaminski, S; Wilhelm, C

    2003-01-01

    Mathematical efficiency calibration with the LabSOCS software was introduced for two detectors in the measurement laboratory of the Central Safety Department of Forschungszentrum Karlsruhe. In the present contribution, conventional efficiency calibration of gamma spectroscopy systems and mathematical efficiency calibration with LabSOCS are compared with respect to their performance, uncertainties, expenses, and results. It is reported about the experience gained, and the advantages and disadvantages of both methods of efficiency calibration are listed. The results allow the conclusion to be drawn that mathematical efficiency calibration is a real alternative to conventional efficiency calibration of gamma spectroscopy systems as obtained by measurements of mixed gamma ray standard sources.

  12. The Re/Os Clock Revisited

    CERN Multimedia

    Leal, L C; Kitis, G; Guber, K H; Quaranta, A; Koehler, P E

    2002-01-01

    The purpose of the proposed project of an accurate measurement of the relevant neutron cross sections of $^{186}$Os and $^{187}$Os is to remove the principal nuclear physics uncertainties in the analysis of the Re/Os cosmochronometer. The necessary cross section information will be obtained in complementary experiments at the nTOF facility at CERN and at the Karlsruhe Van de Graaff accelerator. Transformation of these results into significantly improved stellar reaction rates will allow to evaluate the age of the elements in the framework of galactic chemical evolution models.

  13. KIT competence center for decommissioning. Innovation and promotion of trainees; Kompetenzzentrum Rueckbau am KIT. Nachwuchsfoerderung und Innovationen fuer den Rueckbau

    Energy Technology Data Exchange (ETDEWEB)

    Gentes, Sascha [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Technologie und Management im Baubetrieb

    2016-03-15

    The safe decommissioning of nuclear installations is technically feasible, but is also still a challenge for science, technology and industry. The expertise and know how for decommissioning must be ensured because it will be needed for further decades. Already in 2008 the Karlsruhe Institute of Technology (KIT) had identified this challenge that later emerged through the closure of nuclear power plants in Germany. The KIT opened the professorship Technology and Management of the Decommissioning of Nuclear Installations. In 2014, this section was extended through the dismantling of conventional installations.

  14. Uudiseid maailmast / Nele-Eva Steinfeld

    Index Scriptorium Estoniae

    Steinfeld, Nele-Eva

    2012-01-01

    Lühisõnumeid muusikamaailmast: Paavo Järvist saab Tokyo NHK sümfooniaorkestri peadirigent. Suri Dietrich Fischer-Dieskau. Avastati Antonio Vivaldi uusi teoseid. Glenn Gouldi klaver jõudis Ottawa Rahvuslikku Kunstide Keskusesse. Sbeliuse noodistustarkvara peakorter Suurbritannias suleti. Viini Riigiooperi rekordiliselt kasumlik hooaeg. Bayreuthi markkrahvi ooperimaja arvati UNESCO maailmapärandi nimistusse. Erkki-Sven Tüüri ooperi "Wallenberg" uuslavastus Karlsruhes. Pianist Mihkel Poll andis kontserdi Wigmore Hallis. Rahvusvaheline heliloojate rostrum Stockholmis. Suri viiuldaja Ruggiero Ricci. Lahkus pianist Mihaela Ursuleasa

  15. Decision making processes based on innovation indicators: which implications for technology assessment?

    OpenAIRE

    Nuno Boavida

    2011-01-01

    Based on the report for “Project IV” unit of the PhD programme on Technology Assessment. This thesis research has the supervision of António Moniz (FCT-UNL and ITAS-KIT) and Manuel Laranja (ISEG-UTL). Other members of the thesis committee are Stefan Kuhlmann (Twente University), Leonhard Hennen (Karlsruhe Institute of Technology-ITAS), Tiago Santos Pereira (Universidade de Coimbra/CES) and Cristina Sousa (FCT-UNL). The present work deals with the use of innovation indicators in the decisio...

  16. Design concept for the FLUTE control system

    Energy Technology Data Exchange (ETDEWEB)

    Marsching, Sebastian; Huttel, Erhard; Mueller, Anke-Susanne; Naknaimueang, Somprasong; Nasse, Michael J.; Rossmanith, Robert; Schreck, Marco; Schuh, Marcel; Schwarz, Markus [Karlsruhe Institute of Technology, Karlsruhe (Germany)

    2013-07-01

    FLUTE is a linac-based THz-source being constructed at the Karlsruhe Institute of Technology (KIT). One of the goals of the FLUTE project is the generation of femtosecond electron-bunches. In order to study the various effects influencing the final bunch length, data-acquisition and storage systems that allow correlation of parameters on a per-pulse basis are required. We are planning to use an EPICS-based control system that employs special techniques for pulse-synchronous data-acquisition. In this talk we present the current design concept for this system.

  17. Radiation emitted by transverse-gradient undulators

    Directory of Open Access Journals (Sweden)

    Axel Bernhard

    2016-09-01

    Full Text Available Conventional undulators are used in synchrotron light sources to produce radiation with a narrow relative spectral width as compared to bending magnets or wigglers. The spectral width of the radiation produced by conventional undulators is determined by the number of undulator periods and by the energy spread and emittance of the electron beam. In more compact electron sources like for instance laser plasma accelerators the energy spread becomes the dominating factor. Due to this effect these electron sources cannot in general be used for high-gain free electron lasers (FELs. In order to overcome this limitation, modified undulator schemes, so-called transverse gradient undulators (TGUs, were proposed and a first superconducting TGU was built at Karlsruhe Institute of Technology (KIT, Karlsruhe, Germany. In this paper simulations of the expected synchrotron radiation spectral distribution are presented. An experimental test with that device is under preparation at the laser wakefield accelerator at the JETI laser at the University of Jena, Germany.

  18. Food Waste Generation at Household Level: Results of a Survey among Employees of Two European Research Centers in Italy and Germany

    Directory of Open Access Journals (Sweden)

    Juliane Jörissen

    2015-03-01

    Full Text Available There is a broad consensus in literature that private households are significant contributors to the total amount of food waste in the EU. Thus, any strategy to meaningfully combat food wastage must put the end consumer in the center of prevention activities. This requires deeper insights into people’s motivations to discard still edible food and knowledge about potential barriers to reduce wasting. This paper reports on results of an online survey among two European research centers in Italy (JRC/Ispra and Germany (KIT/Karlsruhe. The focus of the survey was on households’ behaviors (shopping, eating, and food preparation habits and its influence on the generation of food waste. Furthermore, reasons for the disposal of food as well as measures and technologies most needed to prevent wastage were discussed. The results of the survey are analyzed, especially with regard to two questions: (1 Are there considerable differences between Ispra and Karlsruhe? (2 Are there considerable similarities or inconsistencies with the results of previous studies?

  19. Decomposing the profile of PM in two low polluted German cities--mapping of air mass residence time, focusing on potential long range transport impacts.

    Science.gov (United States)

    Dimitriou, Konstantinos; Kassomenos, Pavlos

    2014-07-01

    This paper aims to decompose the profile of particulates in Karlsruhe and Potsdam (Germany), focusing on the localization of PM potential transboundary sources. An air mass cluster analysis was implemented, followed by a study of air mass residence time on a grid of a 0.5° × 0.5° resolution. Particulate/gaseous daily air pollution and meteorological data were used to indicate PM local sources. Four Principal Component Analysis (PCA) components were produced: traffic, photochemical, industrial/domestic and particulate. PM2.5/PM10 ratio seasonal trends, indicated production of PMCOARSE (PM10-PM2.5) from secondary sources in Potsdam during warm period (WP). The residing areas of incoming slow moving air masses are potential transboundary PM sources. For Karlsruhe those areas were mainly around the city. An air mass residence time secondary peak was observed over Stuttgart. For Potsdam, areas with increased dwelling time of the arriving air parcels were detected particularly above E/SE Germany. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Research-related intercultural higher education in satellite geodesy

    Science.gov (United States)

    Mayer, M.; Heck, B.; Krueger, C. P.

    2009-04-01

    In order to improve the education of young researchers (master degree, PhD, PostDocs) a cooperation between the Department of Geomatics (DGEOM), Federal University of Paraná (UFPR), Curitiba (Brazil) and the Geodetic Institute (GIK), University Karlsruhe (TH), Karlsruhe (Germany) was established which now exists since more than five years. The joint venture is actually called "PROBRAL: Precise positioning and height determination by means of GPS: Modeling of errors and transformation into physical heights" and focuses on research and education within the field of satellite geodesy. PROBRAL is funded by the Brazilian academic exchange service CAPES and the German academic exchange service DAAD. The geodetic aim of the research project is to validate and improve the quality of 3d positions derived from observations related to satellite navigation systems like GPS. In order to fulfill this ambitious goal sustainably, research has to be carried out in close cooperation. At the same time, e.g. to guarantee continuous success, a coordinated education has to be ensured. Besides technical education aspects key competences (e.g. language, capacity for teamwork, project management skills) are trained. Within the presentation the lessons which were learned from this project are discussed in detail.

  1. External meeting: KATRIN - direct measurement of neutrino masses with sub-eV sensitivity

    CERN Multimedia

    2007-01-01

    GENEVA UNIVERSITY - ECOLE DE PHYSIQUE Département de physique nucléaire et corspusculaire 24, Quai Ernest-Ansermet 1211 GENEVE 4 - Tél : 022 379 62 73 - Fax: 022 379 69 92 Wednesday 18 April 2007 PARTICLE PHYSICS SEMINAR at 17:00 - Stückelberg Auditorium KATRIN - direct measurement of neutrino masses with sub-eV sensitivity by Prof. Guido Drexlin, Karlsruhe Institute of Technology KIT The major scientific objective of the international Karlsruhe Tritum Neutrino (KATRIN) Experiment is the model independent measurement of the electron neutrino mass in tritium beta decay with a sensitivity of 200 meV. In the cosmological context, this allows an investigation of whether massive relic neutrinos left over from the Big Bang play a specific role as hot dark matter in the evolution of large scale structures of the universe. In particle physics KATRIN will allow for discrimination between different neutrino mass models (either of quasi-degenerate or hierarchical pattern).The key components of KATRIN comprise...

  2. "I can't wait to find out what Nature has in store for us"

    CERN Document Server

    Anaïs Schaeffer

    2012-01-01

    Professor Guido Altarelli, a physicist at CERN and the University of Rome, has received two prizes since the beginning of the year: the Julius Wess prize awarded by the Karlsruhe Institute of Technology (KIT) and the Sakurai prize awarded by the American Physical Society.   Guido Altarelli (left), receiving the Julius Wess prize in Karlsruhe on 16 January. It's been a good start to the year for Guido Altarelli. After receiving two prestigious prizes in the space of a few weeks for achievements during his long career, all he's waiting for is the Higgs boson! "I can't wait to find out what Nature has in store for us!", he smiles. Hardly surprising when you think that Altarelli has been looking for the answers since the very start of his career in particle physics. As a theorist at CERN for over twenty years, he has always worked closely with the experiments, first at the SPS, then at LEP and now at the LHC. Today, following the significant progress in...

  3. Protection of man: the exposed individual

    Energy Technology Data Exchange (ETDEWEB)

    Bohnstedt, A.; Knebel, J.U. [Programme Nuclear Safety Research, Karlsruhe Institute of Technology, Herrmann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Breustedt, B. [Institute for Radiation Research, Karlsruhe Institute of Technology, Herrmann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2010-07-01

    Present methods for quantifying radiation exposure rely on a standardized reference man (75 kg) with defined average anatomical and physiological data. But individual person actually exposed differs from this idealized standard man. Therefore the focus of investigations at the Institute for Radiation Research (Institut fuer Strahlenforschung, ISF) which was founded at Karlsruhe Institute of Technology (Karlsruher Institut fuer Technologie, KIT) in 2009 is based on the vision to place the exposed individual with its anatomical and physiological particularities, under consideration of age, gender, body height, body shape and environment, in the centre of an individual-related quantification of the external and internal radiation exposure. Research work at the ISF is aiming at quantifying radiation exposure by improved determination of doses essentially caused by external radiation fields and the intake of radionuclides into the body. The three main topics of the institute are - external dosimetry (e.g. using a (voxel) model of the hand to simulate skin dose distribution); - internal dosimetry (e.g. body size related efficiency calibration of in-vivo counting equipment); - numerical methods/modeling (e.g. development of a mathematical/voxel-hybrid model of the human body). (authors)

  4. Robotic assisted minimally invasive surgery

    Directory of Open Access Journals (Sweden)

    Palep Jaydeep

    2009-01-01

    Full Text Available The term "robot" was coined by the Czech playright Karel Capek in 1921 in his play Rossom′s Universal Robots. The word "robot" is from the check word robota which means forced labor.The era of robots in surgery commenced in 1994 when the first AESOP (voice controlled camera holder prototype robot was used clinically in 1993 and then marketed as the first surgical robot ever in 1994 by the US FDA. Since then many robot prototypes like the Endoassist (Armstrong Healthcare Ltd., High Wycombe, Buck, UK, FIPS endoarm (Karlsruhe Research Center, Karlsruhe, Germany have been developed to add to the functions of the robot and try and increase its utility. Integrated Surgical Systems (now Intuitive Surgery, Inc. redesigned the SRI Green Telepresence Surgery system and created the daVinci Surgical System ® classified as a master-slave surgical system. It uses true 3-D visualization and EndoWrist ® . It was approved by FDA in July 2000 for general laparoscopic surgery, in November 2002 for mitral valve repair surgery. The da Vinci robot is currently being used in various fields such as urology, general surgery, gynecology, cardio-thoracic, pediatric and ENT surgery. It provides several advantages to conventional laparoscopy such as 3D vision, motion scaling, intuitive movements, visual immersion and tremor filtration. The advent of robotics has increased the use of minimally invasive surgery among laparoscopically naοve surgeons and expanded the repertoire of experienced surgeons to include more advanced and complex reconstructions.

  5. Measurement of Quantum Phase-Slips in Josephson Junction Chains

    Science.gov (United States)

    Guichard, Wiebke

    2011-03-01

    Quantum phase-slip dynamics in Josephson junction chains could provide the basis for the realization of a new type of topologically protected qubit or for the implementation of a new current standard. I will present measurements of the effect of quantum phase-slips on the ground state of a Josephson junction chain. We can tune in situ the strength of the phase-slips. These phase-slips are the result of fluctuations induced by the finite charging energy of each junction in the chain. Our measurements demonstrate that a Josephson junction chain under phase bias constraint behaves in a collective way. I will also show evidence of coherent phase-slip interference, the so called Aharonov-Casher effect. This phenomenon is the dual of the well known Aharonov-Bohm interference. In collaboration with I.M. Pop, Institut Neel, C.N.R.S. and Universite Joseph Fourier, BP 166, 38042 Grenoble, France; I. Protopopov, L. D. Landau Institute for Theoretical Physics, Kosygin str. 2, Moscow 119334, Russia and Institut fuer Nanotechnologie, Karlsruher Institut fuer Technologie, 76021 Karlsruhe, Germany; and F. Lecocq, Z. Peng, B. Pannetier, O. Buisson, Institut Neel, C.N.R.S. and Universite Joseph Fourier. European STREP MIDAS, ANR QUANTJO.

  6. Fundamental questions hydrogeology. Workshop of GRS in cooperation with PTKA-WTE; Grundsatzfragen Hydrogeologie. Workshop der GRS in Zusammenarbeit mit dem PTKA-WTE

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-12-15

    Within the workshop under consideration of the Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (Cologne, Federal Republic of Germany) in cooperation with the Project Management Agency Forschungszentrum Karlsruhe Water Technology and Waste Management Division (Karlsruhe, Federal Republic of Germany) from 5th to 6th November, 2009, in Braunschweig (Federal Republic of Germany) the following workshops were held: (1) Hydrostratigraphical and hydrogeologic structure of the Cenozoic in the Gorleben area (R.-R. Ludwig, H. Klinge); (2) Distribution of fresh water and salt water in the overburden of the Gorleben salt dome (H. Klinge, R.-R. Ludwig); (3) Chemical composition of groundwaters in the salt dome Gorleben (H. Klinge, R.-R. Ludwig); (4) Isotope investigations and age of groundwater (A. Ruebel); (5) On the hydrological situation in the Gorleben aquifer system (G. Buckau, M. Wolf, S. Geyer); (6) Description of the dynamics of fresh water and salt water in the area of the Gorleben drain in the overburden of the Gorleben salt dome (H. Klinge, R.-R. Ludwig); (7) Significance of selected glacial processes for the long-term security of repository sites in North Germany (S. Keller); (8) Model simulation of groundwater movements at the Gorleben site (K. Schelkels, P. Vogel, G. Schmidt); (9) 2D simulation of flow and transport of pollutants (A, Schneider); (10) Simulation of the groundwater flow in the surrounding area of a salt dome - Work of the BfS (J. Wollrath).

  7. Comparison of actinides and fission products recycling scheme with the normal plutonium recycling scheme in fast reactors

    Directory of Open Access Journals (Sweden)

    Salahuddin Asif

    2013-01-01

    Full Text Available Multiple recycling of actinides and non-volatile fission products in fast reactors through the dry re-fabrication/reprocessing atomics international reduction oxidation process has been studied as a possible way to reduce the long-term potential hazard of nuclear waste compared to that resulting from reprocessing in a wet PUREX process. Calculations have been made to compare the actinides and fission products recycling scheme with the normal plutonium recycling scheme in a fast reactor. For this purpose, the Karlsruhe version of isotope generation and depletion code, KORIGEN, has been modified accordingly. An entirely novel fission product yields library for fast reactors has been created which has replaced the old KORIGEN fission products library. For the purposes of this study, the standard 26 groups data set, KFKINR, developed at Forschungszentrum Karlsruhe, Germany, has been extended by the addition of the cross-sections of 13 important actinides and 68 most important fission products. It has been confirmed that these 68 fission products constitute about 95% of the total fission products yield and about 99.5% of the total absorption due to fission products in fast reactors. The amount of fissile material required to guarantee the criticality of the reactor during recycling schemes has also been investigated. Cumulative high active waste per ton of initial heavy metal is also calculated. Results show that the recycling of actinides and fission products in fast reactors through the atomics international reduction oxidation process results in a reduction of the potential hazard of radioactive waste.

  8. Status of the KATRIN experiment with special emphasis on source-related issues

    CERN Document Server

    Sturm, Michael

    2011-01-01

    The Karlsruhe Tritium Neutrino experiment KATRIN will allow a model inde- pendent measurement of the neutrino mass scale with an expected sensitivity of 0.2 eV/c^{2} (90% C.L.) and so will help to clarify the role of neutrinos in the early universe is the direct measurement of the mass of the electron anti-neutrino. KATRIN investigates spectroscopically the electron spectrum from tritium beta- decay close to the kinematic endpoint of 18.6 keV with a high resolution electro-static filter of unprecedented energy resolution of 0.93 eV. KATRIN will be built at the Tritium Laboratory Karlsruhe on site of the KIT Campus North. For such a precise mass-determination a key parameter is the stability of the source in terms of beta-activity und isotopic purity. For that purpose KATRIN uses a strong windowless gaseous tritium source of almost pure molecular tritium (95%) with a throughput of 40 g tritium per day stabilized on 0.1% level. The decay electrons are guided adiabatically from the source to the spectrometer by ...

  9. Fundamentals of combustion research. Final report 2000; Grundlagen der Verbrennungsforschung. Abschlussbericht 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    All ten projects were aimed at modelling and validation of practically relevant natural gas flames. Modelling comprises the use,l development and enhancement of advanced combustion and turbulence models, e.g. PDF models or higher order Reynolds stress models. Validation uses modern laser diagnostics, e.g. spontaneous Raman scattering, LIF spectroscopy, and LDA. The practical applicability is ensured by a 150 kW flame whose characteristics can be extrapolated to industrial-scale plants. For this, four identical experiments were set up in the TECFLAM institutes of Stuttgart, Karlsruhe, Heidelberg, and Darmstadt. [German] Gemeinsames Projektziel der vorliegenden zehn Vorhaben ist die Modellentwicklung und Validierung anwendungsnaher Erdgasflammen. Unter Modellentwicklung ist dabei die Nutzung, Entwicklung und Weiterentwicklung fortschrittlicher Verbrennungs- und Turbulenzmodelle wie PDF-Modelle oder Reynolds-Stress-Modelle hoeherer Ordnung zu verstehen. Validierung wird durchgefuehrt mittels moderner Laserdiagnostik-Verfahren, wie der spontanen Raman-Streuung, der LIF-Spektroskopie sowie LDA-Verfahren. Die Anwendungsnaehe wird sichergestellt durch eine Flamme mit 150 kW Leistung, deren Verhalten auf grosstechnische Anlagen extrapolierbar ist. Um dieses ehrgeizige Ziel zu erreichen, wurden vier identische Versuchsaufbauten in den TECFLAM-Instituten in Stuttgart, Karlsruhe, Heidelberg und Darmstadt errichtet. (orig.)

  10. Addiction Machines

    Directory of Open Access Journals (Sweden)

    James Godley

    2011-10-01

    Full Text Available Entry into the crypt William Burroughs shared with his mother opened and shut around a failed re-enactment of William Tell’s shot through the prop placed upon a loved one’s head. The accidental killing of his wife Joan completed the installation of the addictation machine that spun melancholia as manic dissemination. An early encryptment to which was added the audio portion of abuse deposited an undeliverable message in WB. Wil- liam could never tell, although his corpus bears the in- scription of this impossibility as another form of pos- sibility. James Godley is currently a doctoral candidate in Eng- lish at SUNY Buffalo, where he studies psychoanalysis, Continental philosophy, and nineteenth-century litera- ture and poetry (British and American. His work on the concept of mourning and “the dead” in Freudian and Lacanian approaches to psychoanalytic thought and in Gothic literature has also spawned an essay on zombie porn. Since entering the Academy of Fine Arts Karlsruhe in 2007, Valentin Hennig has studied in the classes of Sil- via Bächli, Claudio Moser, and Corinne Wasmuht. In 2010 he spent a semester at the Dresden Academy of Fine Arts. His work has been shown in group exhibi- tions in Freiburg and Karlsruhe.

  11. Current Direct Neutrino Mass Experiments

    Directory of Open Access Journals (Sweden)

    G. Drexlin

    2013-01-01

    Full Text Available In this contribution, we review the status and perspectives of direct neutrino mass experiments, which investigate the kinematics of β-decays of specific isotopes (3H, 187Re, 163Ho to derive model-independent information on the averaged electron (antineutrino mass. After discussing the kinematics of β-decay and the determination of the neutrino mass, we give a brief overview of past neutrino mass measurements (SN1987a-ToF studies, Mainz and Troitsk experiments for 3H, cryobolometers for 187Re. We then describe the Karlsruhe Tritium Neutrino (KATRIN experiment currently under construction at Karlsruhe Institute of Technology, which will use the MAC-E-Filter principle to push the sensitivity down to a value of 200 meV (90% C.L.. To do so, many technological challenges have to be solved related to source intensity and stability, as well as precision energy analysis and low background rate close to the kinematic endpoint of tritium β-decay at 18.6 keV. We then review new approaches such as the MARE, ECHO, and Project8 experiments, which offer the promise to perform an independent measurement of the neutrino mass in the sub-eV region. Altogether, the novel methods developed in direct neutrino mass experiments will provide vital information on the absolute mass scale of neutrinos.

  12. Testing and model-aided analysis of a 2 kW el PEMFC CHP-system

    Science.gov (United States)

    König, P.; Weber, A.; Lewald, N.; Aicher, T.; Jörissen, L.; Ivers-Tiffée, E.; Szolak, R.; Brendel, M.; Kaczerowski, J.

    A prototype PEMFC CHP-system (combined heat and power) for decentralised energy supply in domestic applications has been installed in the Fuel Cell Testing Laboratory at the Institut für Werkstoffe der Elektrotechnik (IWE), Universität Karlsruhe (TH). The system, which was developed at the Zentrum für Sonnenenergie- und Wasserstoff-Forschung ZSW, Ulm (FC-stack) and the Fraunhofer-Institut für Solare Energiesysteme ISE, Freiburg (reformer) is operated and tested in close cooperation with the Stadtwerke Karlsruhe. The tests are carried out as part of the strategic project EDISon, which is supported by the German Federal Ministry of Economics and Technology (BMWA). The performance of the system is evaluated for different operating conditions. The tests include steady state measurements under different electrical and thermal loads as well as an analysis of the dynamic behaviour of the system during load changes. First results of these steady state and dynamic operation characteristics will be presented in this paper.

  13. Direct energy conversion using liquid metals

    Directory of Open Access Journals (Sweden)

    Onea Alexandru

    2014-01-01

    Full Text Available Liquid metals have excellent properties to be used as heat transport fluids due to their high thermal conductivity and their wide applicable temperature range. The latter issue can be used to go beyond limitations of existing thermal solar energy systems. Furthermore, the direct energy converter Alkali Metal Thermo Electric Converter (AMTEC can be used to make intangible areas of energy conversion suitable for a wide range of applications. One objective is to investigate AMTEC as a complementary cycle for the next generation of concentrating solar power (CSP systems. The experimental research taking place in the Karlsruhe Institute of Technology (KIT is focused on the construction of a flexible AMTEC test facility, development, test and improvement of liquid-anode and vapor-anode AMTEC devices as well as the coupling of the AMTEC cold side to the heat storage tank proposed for the CSP system. Within this project, the investigations foreseen will focus on the analyses of BASE-metal interface, electrode materials and deposition techniques, corrosion and erosion of materials brought in contact with high temperature sodium. This prototype demonstrator is planned to be integrated in the KArlsruhe SOdium LAboratory (KASOLA, a flexible closed mid-size sodium loop, completely in-house designed, presently under construction at the Institute for Neutron Physics and Reactor Technology (INR within KIT.

  14. Radiation damage effects on CMS-sensors quality assurance and irradiation tests

    CERN Document Server

    Furgeri, A J; de Boer, Wim; Forton, E; Hartmann, F; Freudenstein, S

    2004-01-01

    The LHC at CERN (Geneva, Switzerland) is a proton-proton collider with a luminosity of 10/sup 34/ (1/cm/sup 2/s) be working for 10 years (starting in 2007). CMS will be one of the general purpose detectors. The CMS tracker consists of 10 barrel layers, plus 2 times 9 endcap disks, all together 24328 silicon sensors with a total area of 206m/sup 2/ silicon, covering a pseudorapidity of eta Karlsruhe (Germany) and Louvain-la-Neuve (Belgium) a fraction of 1% of the sensors are electrically qualified. In Karlsruhe the sensors are irradiated with 26 MeV - protons and in Louvain-la-Neuve with fast neutrons. For safety reasons sensors are irradiated with a fluence 50% higher than predicted. The electrical...

  15. Laser physics from principles to practical work in the lab

    CERN Document Server

    Eichhorn, Marc

    2014-01-01

    This textbook originates from a lecture course in laser physics at the Karlsruhe School of Optics and Photonics at the Karlsruhe Institute of Technology (KIT). A main goal in the conception of this textbook was to describe the fundamentals of lasers in a uniform and especially lab-oriented notation and formulation as well as many currently well-known laser types, becoming more and more important in the future. It closes a gap between the measureable spectroscopic quantities and the whole theoretical description and modeling. This textbook contains not only the fundamentals and the context of laser physics in a mathematical and methodical approach important for university-level studies. It allows simultaneously, owing to its conception and its modern notation, to directly implement and use the learned matter in the practical lab work. It is presented in a format suitable for everybody who wants not only to understand the fundamentals of lasers but also use modern lasers or even develop and make laser setups. T...

  16. Nuclear safety research project. Annual report 1995; Projekt Nukleare Sicherheitsforschung. Jahresbericht 1995

    Energy Technology Data Exchange (ETDEWEB)

    Hueper, R. [ed.

    1996-08-01

    The reactor safety R and D work of the Karlsruhe Research Centre (FZK) has been part of the Nuclear Safety Research Project (PSF) since 1990. The present annual report 1995 summarizes the R and D results. The research tasks are coordinated in agreement with internal and external working groups. The contributions to this report correspond to the status of early 1996. An abstract in English precedes each of them, whenever the respective article is written in German. (orig.) [Deutsch] Seit Beginn 1990 sind die F+E-Arbeiten des Forschungszentrums Karlsruhe (FZK) zur Reaktorsicherheit im Projekt Nukleare Sicherheitsforschung (PSF) zusammengefasst. Der vorliegende Jahresbericht 1995 enthaelt Beitraege zu aktuellen Fragen der Sicherheit von Leitwasserreaktoren und innovativen Systemen sowie der Umwandlung von minoren Aktiniden. Die konkreten Forschungsthemen und -vorhaben werden mit internen und externen Fachgremien laufend abgestimmt. An den beschriebenen Arbeiten sind die folgenden Institute und Abteilungen des FZK beteiligt: Institut fuer Materialforschung IMF I, II, III; Institut fuer Neutronenphysik und Reaktortechnik INR; Institut fuer Angewandte Thermo- und Fluiddynamik IATF; Institut fuer Reaktorsicherheit IRS; Hauptabteilung Informations- und Kommunikationstechnik HIK; Hauptabteilung Ingenieurtechnik HIT; Institut fuer Nukleare Entsorgungstechnik INE; Hauptabteilung Versuchstechnik HVT; Institut fuer Technische Chemie ITC sowie vom FZK beauftragte externe Institutionen. Die einzelnen Beitraege stellen den Stand der Arbeiten im Fruehjahr 1996 dar und sind entsprechend dem F+E-Programm 1995 numeriert. Den in deutscher Sprache verfassten Beitraegen sind Kurzfassungen in englischer Sprache vorangestellt. (orig.)

  17. International Conference on Computational Mechanics

    CERN Document Server

    Atluri, Satya

    1986-01-01

    It is often said that these days there are too many conferences on general areas of computational mechanics. mechanics. and numer ical methods. vJhile this may be true. the his tory of scientific conferences is itself quite short. According to Abraham Pais (in "Subtle is the Lord ...• " Oxford University Press. 1982. p.80). the first international scientific conference ever held was the Karlsruhe Congress of Chemists. 3-5 September 1860 in Karlsruhe. Germany. There were 127 chemists in attendance. and the participants came from Austria. Belgium. France. Germany. Great Britain. Italy. Mexico. Poland. Russia. Spain. Sweden. and Switzerland. At the top of the agenda of the points to be discussed at this conference was the question: "Shall a difference be made between the expressions molecule and atom?" Pais goes on to note: "The conference did not at once succeed in bringing chemists closer together ... It is possible that the older men were offended by the impetuous behavior and imposing manner of the younger...

  18. Observed and simulated time evolution of HCl, ClONO2, and HF total columns

    Science.gov (United States)

    Ruhnke, Roland; Geomon, Ndacc Infrared, Modelling Working Group

    2010-05-01

    GEOmon, NDACC Infrared, and Modelling Working Group: M.P. Chipperfield (2), M. De Mazière (3), J. Notholt (4), S. Barthlott (1), R.L. Batchelor (5,17), R.D. Blatherwick (16), Th. Blumenstock (1), M.T. Coffey (17), P. Duchatelet (6), H. Fast (7), W. Feng (2), A. Goldman (16), D.W.T. Griffith (8), K. Hamann (1), J.W. Hannigan (17), F. Hase (1), N.B. Jones (8), A. Kagawa (9,10), Y. Kasai (9), O. Kirner (19), R. Kohlhepp (1), W. Kouker (1), I. Kramer (1), R. Lindenmaier (5), E. Mahieu (6), R.L. Mittermeier (7), B. Monge-Sanz (2), I. Murata (12), H. Nakajima (13), I. Morino (11), M. Palm (4), C. Paton-Walsh (8), Th. Reddmann (1), M. Rettinger (15), C.P. Rinsland (18), M. Schneider (1), C. Senten (3), B.-M. Sinnhuber (4), D. Smale (14), K. Strong (5), R. Sussmann (15), J.R. Taylor (5), G. Vanhaelewyn (3), T. Warneke (4), C. Whaley (5), M. Wiehle (1), and S.W. Wood (14) (1) Karlsruhe Institute of Technology (KIT), IMK-ASF, Karlsruhe, Germany, (2) University of Leeds, Leeds, United Kingdom, (3) Belgian Institute for Space Aeronomy (BIRA-IASB), Brussels, Belgium, (4) University of Bremen, Institute of Environmental Physics, Bremen, Germany, (5) Department of Physics, University of Toronto, Toronto, Ontario, Canada, (6) University of Liège, Institute of Astrophysics and Geophysics, Liège, Belgium, (7) Environment Canada, Toronto, Ontario, Canada, (8) Centre for Atmospheric Chemistry, University of Wollongong, Wollongong, Australia, (9) National Institute of Information and Communications Technology, Tokyo, Japan, (10) Fujitsu FIP Corporation, Tokyo, Japan, (11) Center for Global Environmental Research, National Institute for Environmental Studies (NIES), Japan, (12) Department of Environmental Studies, Graduate School of Environmental Studies, Tohoku University, Japan, (13) Atmospheric Environment Division, National Institute for Environmental Studies, Japan, (14) National Institute of Water and Atmospheric Research Ltd (NIWA), Lauder, New Zealand, (15) Karlsruhe

  19. Analysis of the architecture and urbanism aspects of the reconstruction after the l'Aquila earthquake in the context of European social housing

    Science.gov (United States)

    Bostenaru, Maria

    2010-05-01

    This paper proposes to analyse the architectural and urbanism aspects of the progetto C.A.S.E. The new architecture of the progetto C.A.S.E. is put in the context of similar developments, namely: - buildings for student dormitories, as the foreseen development is that the dwellings in progetto C.A.S.E. are only temporarily in this use, and will later build a campus. For this purpose the HaDiKo (Hans Dickmann Kolleg) from Karlsruhe, Germany, is considered. This features an award winning building from the 1960s, four others from the 1970s and an extension from 2006, with also a tight construction shedule which was followed by the author; - Italian buildings from the 20th century which do not feature Modernism, in connection with other rather traditional buildings of the Modernity, namely the Vienneise "Hof"s; - social housing from the 20th and 21st century, taking as examples the construction of the office Kramm et Strigl from the 1990s and on in Germany. Particularly the example of Bürgerparkviertel in Darmstadt from 1999 was also seen when in construction; - from the later a case is particulary considered: the prefabricated housing in Wiesbaden, which has been, in a former research of the author, put in connection with the prefabricated buildings from seismically prone Bucharest, where they proved earthquake resistant. A first interpretation is in the context of the so-called "Zeilenbau" - the opposite of the traditional urban tissue with blocks. This interpretation is helpful since in case of the social housing investigted above this was always building at the periphery as it is the case in l'Aquila. When social housing reaches the core of the towns, it becomes block building, as the "Hof"s are different from the "Neues Bauen" siedlungen. The Italian examples are helpful to see how middle class housing in Italy is seen, not only social. Construction times are also relevant, and two of the examples were investigated as such, as the progetto C.A.S.E. is currently

  20. German contributions to the CMS computing infrastructure

    Science.gov (United States)

    Scheurer, A.; German CMS Community

    2010-04-01

    The CMS computing model anticipates various hierarchically linked tier centres to counter the challenges provided by the enormous amounts of data which will be collected by the CMS detector at the Large Hadron Collider, LHC, at CERN. During the past years, various computing exercises were performed to test the readiness of the computing infrastructure, the Grid middleware and the experiment's software for the startup of the LHC which took place in September 2008. In Germany, several tier sites are set up to allow for an efficient and reliable way to simulate possible physics processes as well as to reprocess, analyse and interpret the numerous stored collision events of the experiment. It will be shown that the German computing sites played an important role during the experiment's preparation phase and during data-taking of CMS and, therefore, scientific groups in Germany will be ready to compete for discoveries in this new era of particle physics. This presentation focuses on the German Tier-1 centre GridKa, located at Forschungszentrum Karlsruhe, the German CMS Tier-2 federation DESY/RWTH with installations at the University of Aachen and the research centre DESY. In addition, various local computing resources in Aachen, Hamburg and Karlsruhe are briefly introduced as well. It will be shown that an excellent cooperation between the different German institutions and physicists led to well established computing sites which cover all parts of the CMS computing model. Therefore, the following topics are discussed and the achieved goals and the gained knowledge are depicted: data management and distribution among the different tier sites, Grid-based Monte Carlo production at the Tier-2 as well as Grid-based and locally submitted inhomogeneous user analyses at the Tier-3s. Another important task is to ensure a proper and reliable operation 24 hours a day, especially during the time of data-taking. For this purpose, the meta-monitoring tool "HappyFace", which was

  1. Characterization and long term operation of a novel superconducting undulator with 15 mm period length in a synchrotron light source

    Directory of Open Access Journals (Sweden)

    S. Casalbuoni

    2016-11-01

    Full Text Available A new cryogen-free full scale (1.5 m long superconducting undulator with a period length of 15 mm (SCU15 has been successfully tested in the ANKA storage ring. This represents a very important milestone in the development of superconducting undulators for third and fourth generation light sources carried on by the collaboration between the Karlsruhe Institute of Technology and the industrial partner Babcock Noell GmbH. SCU15 is the first full length device worldwide that with beam reaches a higher peak field than what expected with the same geometry (vacuum gap and period length with an ideal cryogenic permanent magnet undulator built with the best material available PrFeB. After a summary on the design and main parameters of the device, we present here the characterization in terms of spectral properties and the long term operation of the SCU15 in the ANKA storage ring.

  2. KARMEN: neutrino spectroscopy at ISIS

    Energy Technology Data Exchange (ETDEWEB)

    Drexlin, G. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Kernphysik

    1996-11-01

    The Karlsruhe-Rutherford Neutrino Experiment KARMEN at the spallation neutron facility ISIS investigates fundamental properties of neutrinos as well as their interactions with matter. Low energy neutrinos with energies up to 50 MeV emitted by the pulsed {nu}-source ISIS are detected by a 56 tonne high resolution liquid scintillation calorimeter. Clear {nu}-signatures allow a reliable search for neutrino oscillations of the type {nu}{sub {mu}}{yields}{nu}{sub e} and {nu}{sub {mu}}{yields}{nu}{sub e} as well as a detailed investigation of neutrino-nucleus interactions in an energy range important for astrophysics. We present the results of the KARMEN experiment from data taking in the period from June 1990 - December 1995. (author) 9 figs., 10 refs.

  3. BioWaste-to-Liquid. An ecologic-economic consideration of pyrolysis oil based on biogenic residual materials and wastes; BioWaste-to-Liquid. Oekologisch-oekonomische Betrachtung von Pyrolyseoel auf Basis biogener Rest- und Abfallstoffe

    Energy Technology Data Exchange (ETDEWEB)

    Liemen, Franziska; Zech, Konstantin; Kroeger, Michael [DBFZ Deutsches Biomasseforschungszentrum gemeinnuetzige GmbH, Leipzig (Germany)

    2012-07-01

    The joint research project BioWaste-to-Liquid, which is carried out by Deutsches BiomasseForschungsZentrum (DBFZ) and Karlsruhe Institute of Technology (KIT), focuses on the provision of alternative fuels by means of fast pyrolysis. Alongside the various tests and technical analyses, an ecologic and economic assessment was carried out, that examines the performance of different raw materials in terms of GHG-emissions and production costs. The herein examined raw materials were Rape straw, Sunflower straw, residues of corn harvesting, hay, waste wood, bark and driftwood from river Rhine. The results show a good performance of waste wood and draft wood both in ecologic and economic terms, whilst especially Sunflower straw can be considered rather unsuitable since it is particularly affected by the negative effects of the compensatory fertilization. The other raw materials perform varyingly in the ecologic and economic assessments. (orig.)

  4. Transition from large-scale to small-scale dynamo.

    Science.gov (United States)

    Ponty, Y; Plunian, F

    2011-04-15

    The dynamo equations are solved numerically with a helical forcing corresponding to the Roberts flow. In the fully turbulent regime the flow behaves as a Roberts flow on long time scales, plus turbulent fluctuations at short time scales. The dynamo onset is controlled by the long time scales of the flow, in agreement with the former Karlsruhe experimental results. The dynamo mechanism is governed by a generalized α effect, which includes both the usual α effect and turbulent diffusion, plus all higher order effects. Beyond the onset we find that this generalized α effect scales as O(Rm(-1)), suggesting the takeover of small-scale dynamo action. This is confirmed by simulations in which dynamo occurs even if the large-scale field is artificially suppressed.

  5. Influence of grain size distribution on dynamic shear modulus of sands

    Science.gov (United States)

    Dyka, Ireneusz; Srokosz, Piotr E.; Bujko, Marcin

    2017-11-01

    The paper presents the results of laboratory tests, that verify the correlation between the grain-size characteristics of non-cohesive soils and the value of the dynamic shear modulus. The problem is a continuation of the research performed at the Institute of Soil Mechanics and Rock Mechanics in Karlsruhe, by T. Wichtmann and T. Triantafyllidis, who derived the extension of the applicability of the Hardin's equation describing the explicite dependence between the grain size distribution of sands and the values of dynamic shear modulus. For this purpose, piezo-ceramic bender elements generating elastic waves were used to investigate the mechanical properties of the specimens with artificially generated particle distribution. The obtained results confirmed the hypothesis that grain size distribution of non-cohesive soils has a significant influence on the dynamic shear modulus, but at the same time they have shown that obtaining unambiguous results from bender element tests is a difficult task in practical applications.

  6. Model experiments for the extension of the pumped storage hydropower plant of Vianden in Luxembourg; Wasserbauliche Modelluntersuchungen zur Erweiterung des Pumpspeicherkraftwerks Vianden in Luxemburg

    Energy Technology Data Exchange (ETDEWEB)

    Mohringer, Thomas; Seidel, Frank; Lehmann, Boris; Nestmann, Franz [Karlsruhe Univ. (DE). Inst. fuer Wasser und Gewaesserentwicklung (IWG)

    2009-07-01

    The pumped storage hydropower plant of Vianden in Luxembourg is considered to be one of Europe's most powerful hydropower plants. Due to the extension of the plant by an additional pump-turbine the Institute of Water and River Basin Management at the Universitaet Karlsruhe (TH) was charged to run hydraulic model investigations. Fields of interest have been: the optimisation of the hydraulic shape of the new intake-outlet structure, the sediment settlement behaviour and the hydraulic conditions near the intake-outlet structure. Further a smooth operation of the plant's existing parts during construction could be guaranteed. The model experiments have brought planning reliability regarding the hydraulic function of the new structures. (orig.)

  7. Development and implementation of quality control strategies for CMS silicon strip tracker modules

    CERN Document Server

    Dirkes, Guido

    The LHC will explore physics at the energy frontier and will address many open questions in particle physics, like the search for the Higgs boson or Supersymmetry. For both high resolution track and vertex reconstruction is vital. The CMS silicon tracker consists of 15232 detector modules. Production and assembly of these will span two and a half years period, during which the quality control chain has to ensure functionality and reliability of the modules produced. The CMS group in Karlsruhe will produce and qualify 1600 modules. Therefore automatic test systems are developed and test strategies are worked out. Already during the RnD phase, first prototype tests were performed and some weak points of the design were uncovered. Two test stations are built. One focuses on a fast functionality test, including an active thermal cycle. The other focuses on debugging and repair requirements, including additional test options with lasers, radioactive sources, probes and infrared LEDs. For quality control measuremen...

  8. Performance of a TiN-coated monolithic silicon pin-diode array under mechanical stress

    Energy Technology Data Exchange (ETDEWEB)

    VanDevender, B.A., E-mail: brent.vandevender@pnnl.gov [Center for Experimental Nuclear Physics and Astrophysics and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Bodine, L.I.; Myers, A.W.; Amsbaugh, J.F.; Howe, M.A.; Leber, M.L.; Robertson, R.G.H.; Tolich, K.; Van Wechel, T.D.; Wall, B.L. [Center for Experimental Nuclear Physics and Astrophysics and Department of Physics, University of Washington, Seattle, WA 98195 (United States)

    2012-05-01

    The Karlsruhe Tritium Neutrino Experiment (KATRIN) will detect tritium {beta}-decay electrons that pass through its electromagnetic spectrometer with a highly segmented monolithic silicon pin-diode focal-plane detector (FPD). This pin-diode array will be on a single piece of 500-{mu}m-thick silicon, with contact between titanium nitride (TiN)-coated detector pixels and front-end electronics made by spring-loaded pogo pins. The pogo pins will exert a total force of up to 50 N on the detector, deforming it and resulting in mechanical stress up to 50 MPa in the silicon bulk. We have evaluated a prototype pin-diode array with a pogo-pin connection scheme similar to the KATRIN FPD. We find that pogo pins make good electrical contact to TiN and observe no effects on detector resolution or reverse-bias leakage current which can be attributed to mechanical stress.

  9. The AMS-02 transition radiation detector

    CERN Document Server

    Kirn, Th

    2004-01-01

    The Alpha Magnetic Spectrometer AMS02 will be equipped with a large transition radiation detector (TRD) to achieve a proton background suppression necessary for dark matter searches. The AMS02 TRD consists of 20 layers of fleece radiator each with Xe/CO//2 proportional wire straw tubes read out by a dedicated low-power data- acquisition system. A space-qualified TRD design will be presented. The performance of a 20-layer prototype was tested at CERN with electron, myon and pion beams up to l00 GeV and with protons up to 250 GeV. The beam-test results will be compared to Geant3 MC predictions. The detector is under construction at RWTH Aachen; the gas system will be built at MIT, slow-control at MIT and INFN Rome and DAQ at TH Karlsruhe. This project is funded by the German Space Agency DLR, the US Department of Energy DOE and NASA.

  10. Research, Education and Innovation Bundling Forces towards a Sustainable European Energy Future

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    New technologies and applied innovation in the field of sustainable energy are needed in order to achieve a competitive and climate neutral Europe. As one of the first three Knowledge and Innovation Communities (KIC) of the European Institute of Innovation and Technology (EIT), KIC InnoEnergy invests in innovation projects and new educational programmes and provides business creation service with the purpose of delivering the disruptive technologies and innovations that Europe requires to meet this ambitious goal. Its stakeholders are top European players in the industry, research institutes, universities and business schools. Six regionally bundled European hubs – Barcelona/Lisbon, Grenoble, Eindhoven, Karlsruhe, Stockholm and Krakow - lead one thematic field each in sustainable energy. The thematic fields addressed range from Intelligent “Energy-efficient Residential Buildings and Cities” over “Energy from Chemical Fuels”, “Renewable Energies”, “Clean Coal Technologies” to “European Smar...

  11. Case study of a tornado in the upper Rhine valley

    Energy Technology Data Exchange (ETDEWEB)

    Hannesen, R.; Dotzek, N.; Gysi, H.; Beheng, K.D. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Meteorologie und Klimaforschung

    1998-08-01

    On 9 September 1995 a short-lived tornado occurred in the upper Rhine valley near Oberkirch-Nussbach, uprooting several trees as well as damaging buildings and cars. The storm, confirmed by eye witnesses and damage analyses performed by Wetteramt Freiburg of the German weather service, was also detected by the IMK C-band Doppler radar in Karlsruhe. The data show a well-defined mesocyclonic rotation in the tornado`s parent Cb cloud. The orography distinctly influenced the development of a wind field suitable for supercell formation. This points to preferred areas of tornadic activity. The dominant effects of vertical wind shear compared to convective energy during tornadogenesis are evident for this storm. Its small scale confirms the existence of small supercell storms being studied in the USA in recent years. (orig.) 21 refs.

  12. Laboratory experiments and numerical simulations on magnetic instabilities

    CERN Document Server

    Stefani, F; Kasprzyk, Ch; Paredes, A; Ruediger, G; Seilmayer, M

    2016-01-01

    Magnetic fields of planets, stars and galaxies are generated by self-excitation in moving electrically conducting fluids. Once produced, magnetic fields can play an active role in cosmic structure formation by destabilizing rotational flows that would be otherwise hydrodynamically stable. For a long time, both hydromagnetic dynamo action as well as magnetically triggered flow instabilities had been the subject of purely theoretical research. Meanwhile, however, the dynamo effect has been observed in large-scale liquid sodium experiments in Riga, Karlsruhe and Cadarache. In this paper, we summarize the results of some smaller liquid metal experiments devoted to various magnetic instabilities such as the helical and the azimuthal magnetorotational instability, the Tayler instability, and the different instabilities that appear in a magnetized spherical Couette flow. We conclude with an outlook on a large scale Tayler-Couette experiment using liquid sodium, and on the prospects to observe magnetically triggered ...

  13. The history of theoretical, material and computational mechanics mathematics meets mechanics and engineering

    CERN Document Server

    2014-01-01

    This collection of 23 articles is the output of lectures in special sessions on “The History of Theoretical, Material and Computational Mechanics” within the yearly conferences of the GAMM in the years 2010 in Karlsruhe, Germany, 2011 in Graz, Austria, and in 2012 in Darmstadt, Germany; GAMM is the “Association for Applied Mathematics and Mechanics”, founded in 1922 by Ludwig Prandtl and Richard von Mises. The contributions in this volume discuss different aspects of mechanics. They are related to solid and fluid mechanics in general and to specific problems in these areas including the development of numerical solution techniques. In the first part the origins and developments of conservation principles in mechanics and related variational methods are treated together with challenging applications from the 17th to the 20th century. Part II treats general and more specific aspects of material theories of deforming solid continua and porous soils. and Part III presents important theoretical and enginee...

  14. Comparison of radon doses based on different radon monitoring approaches.

    Science.gov (United States)

    Vaupotič, Janja; Smrekar, Nataša; Žunić, Zora S

    2017-04-01

    In 43 places (23 schools, 3 kindergartens, 16 offices and one dwelling), indoor radon has been monitored as an intercomparison experiment, using α-scintillation cells (SC - Jožef Stefan Institute, Slovenia), various kinds of solid state nuclear track detectors (KfK - Karlsruhe Institute of Technology, Germany; UFO - National Institute of Radiological Sciences, Chiba, Japan; RET - University College Dublin, Ireland) and active electronic devices (EQF, Sarad, Germany). At the same place, the radon levels and, consequently, the effective doses obtained with different radon devices differed substantially (by a factor of 2 or more), and no regularity was observed as regards which detector would show a higher or lower dose. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. 9th International Conference on Management Science and Engineering Management

    CERN Document Server

    Nickel, Stefan; Machado, Virgilio; Hajiyev, Asaf

    2015-01-01

    This is the Proceedings of the Ninth International Conference on Management Science and Engineering Management (ICMSEM) held from July 21-23, 2015 at Karlsruhe, Germany. The goals of the conference are to foster international research collaborations in Management Science and Engineering Management as well as to provide a forum to present current findings. These proceedings cover various areas in management science and engineering management. It focuses on the identification of management science problems in engineering and innovatively using management theory and methods to solve engineering problems effectively. It also establishes a new management theory and methods based on experience of new management issues in engineering. Readers interested in the fields of management science and engineering management will benefit from the latest cutting-edge innovations and research advances presented in these proceedings and will find new ideas and research directions. A total number of 132 papers from 15 countries a...

  16. Fluid Dynamics Prize Lecture: Homogeneous Dynamos in Planets and in the Laboratory

    Science.gov (United States)

    Busse, F. H.

    2000-11-01

    Numerical simulations of the dynamo problem of the generation of magnetic fields by convection flows in rotating spherical fluid shells have been extended to a sufficiently large parameter regime such that extrapolation to the condition of planetary cores have become feasible. Besides dipolar fields, hemispherical and quadrupolar fields are preferred in various regimes of the parameter space. In the latter two cases oscillating time dependances are always found inspite of the chaotic nature of the dynamos. Subcritical dynamo states are typical and multiple dynamo states are possible. On the experimental side the homogeneous dynamo process has recently been demonstrated without the use of ferromagnetic material in Riga and Karlsruhe. Further experiments at other laboratories are expected to realize dynamos under conditions of strong turbulence.

  17. Die Energiewerke Nord GmbH. From operator of a decommissioned Russian nuclear power plant to one of Europe's leading decommissioning companies; Die Energiewerke Nord GmbH. Der Weg vom Betreiber eines stillgelegten russischen Kernkraftwerkes zu einem fuehrenden Stilllegungsunternehmen in Europa

    Energy Technology Data Exchange (ETDEWEB)

    Philipp, Marlies [Energiewerke Nord GmbH, Rubenow (Germany)

    2011-03-15

    EWN GmbH is a state-owned company with these duties: - decommissioning and demolition of the Greifswald and Rheinsberg nuclear power stations; - safe operation of the Zwischenlager Nord interim store; - development of the 'Lubminer Heide' industrial and commercial estate. Other projects for which EWN GmbH uses its know-how: - disposal of 120 decommissioned Russian nuclear submarines in Murmansk; - decommissioning and dismantling of the Juelich, NRW, AVR experimental reactor; - demolition of nuclear plants; running the Central Decontamination Operations Department at Karlsruhe, BW. Since 2008, EWN GmbH has held 25% of the shares of Deutsche Gesellschaft zum Bau- und Betrieb von Endlagern fuer Abfallstoffe mbH (DBE), a firm building and operating nuclear repositories. (orig.)

  18. Development of self-cooled liquid metal breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Malang, S.; Tillack, M.S. [comps.; Barleon, L.; Baumgaertner, S.; Borgstedt, H.U.; Buehler, L.; Buerkle, G.; Dammel, F.; Feuerstein, H.; Fischer, U.; Gabel, K.; Gerhardt, H.; Glasbrenner, H.; Heider, T.; Jordan, T.; Kleefeldt, K.; Kleykamp, H.; Lindau, R.; Moeslang, A.; Norajitra, F.; Reimann, G.; Reimann, J.; Riesch-Oppermann, H.; Ritzhaupt-Kleissl, H.J.; Schleisiek, K.; Schmitz, G.; Schnauder, H.; Stieglitz, R.; Tellini, B.; Tsige-Tamirat, H.

    1995-11-01

    The development of liquid metal breeder blankets for fusion reactors has been performed in the Forschungszentrum Karlsruhe as a part of the European fusion blanket development program with the aim to select the two most promising concepts in 1995 for further development. In this report are described the designs of self-cooled blankets together with the results of the accompanying R and D program of the years 1992-1995. The program includes design studies as well as theoretical and experimental work in the fields of neutronics, magneto-hydrodynamics, thermohydraulics, mechanical stresses, compatibility and purification of lead-lithium, tritium extraction and control, safety, reliability, electrical insulating coatings, and fabrication technologies for blanket segments. (orig.) 250 refs.

  19. BUGLE-96 validation with MORSE-SGC/S using water and iron experiments from SINBAD 97

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, A.

    1999-12-03

    This document summarizes the validation of MORSE-SGC/S with the BUGLE-96 cross section library. SINBAD Benchmark Experiment 2.004, Winfrith Water Benchmark Experiment and SBE 6.001, Karlsruhe Iron Sphere Benchmark Experiment were utilized for this validation. The MORESE-SGC/S code with the BUGLE-96 cross-section library was used to model the experimental configurations as given in SINDBAD 97. SINDBAD is a shielding integral benchmark archive and database developed at the Oak Ridge National Laboratory (ORNL). For means of comparison, the experimental models were also executed with MORSE-SGC/S using the BUGLE-80 cross-section library. BUGLE-96 cross section will be used for shielding applications only as recommended by ORNL.

  20. Autonomous Robot Navigation in Human-Centered Environments Based on 3D Data Fusion

    Directory of Open Access Journals (Sweden)

    Rüdiger Dillmann

    2007-01-01

    Full Text Available Efficient navigation of mobile platforms in dynamic human-centered environments is still an open research topic. We have already proposed an architecture (MEPHISTO for a navigation system that is able to fulfill the main requirements of efficient navigation: fast and reliable sensor processing, extensive global world modeling, and distributed path planning. Our architecture uses a distributed system of sensor processing, world modeling, and path planning units. In this arcticle, we present implemented methods in the context of data fusion algorithms for 3D world modeling and real-time path planning. We also show results of the prototypic application of the system at the museum ZKM (center for art and media in Karlsruhe.

  1. The cloud storage service bwSync&Share at KIT

    CERN Multimedia

    CERN. Geneva

    2014-01-01

    The Karlsruhe Institute of Technology introduced the bwSync&Share collaboration service in January 2014. The service is an on-premise alternative to existing public cloud storage solutions for students and scientists in the German state of Baden-Württemberg, which allows the synchronization and sharing of documents between multiple devices and users. The service is based on the commercial software PowerFolder and is deployed on a virtual environment to support high reliability and scalability for potential 450,000 users. The integration of the state-wide federated identity management system (bwIDM) and a centralized helpdesk portal allows the service to be used by all academic institutions in the state of Baden-Württemberg. Since starting, approximately 15 organizations and 8,000 users joined the service. The talk gives an overview of related challenges, technical and organizational requirements, current architecture and future development plans.

  2. VESPA. Behaviour of long-lived fission and activation products in the nearfield of a nuclear waste repository and the possibilities of their retention

    Energy Technology Data Exchange (ETDEWEB)

    Bischofer, Barbara; Hagemann, Sven [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Koeln (Germany); Altmaier, Marcus [Karlsruher Institut fuer Technologie (KIT) (Germany); and others

    2016-06-15

    The present document is the final report of the Joint Research Project VESPA (Behaviour of Long-lived Fission and Activation Products in the Near Field of a Nuclear Waste Repository and the Possibilities of Their Retention), started in July 2010 with a duration of four years. The following four institutions were collaborative Partners in VESPA: - Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH - Institut fuer Energie- und Klimaforschung, IEK-6: Nukleare Entsorgung und Reaktorsicherheit, Forschungszentrum Juelich (FZJ) - Institut fuer Ressourcenoekologie (IRE), Helmholtz-Zentrum Dresden-Rossendorf (HZDR) - Institut fuer Nukleare Entsorgung (INE), Karlsruher Institut fuer Technologie (KIT) VESPA was funded by the German Federal Ministry of Economics and Energy (BMWi) under the contract numbers 02 E 10770 (GRS), 02 E 10780 (FZJ-IEF-6), 02 E 10790 (HZDR-IRE), 02 E 10800 (KIT-INE).

  3. Erstnachweis von Oxyopes lineatus in Deutschland und faunistisch-taxonomische Anmerkungen zu weiteren besonderen Arten aus Baden-Württemberg (Araneae: Lycosidae, Oxyopidae, Salticidae, Thomisidae, Trachelidae

    Directory of Open Access Journals (Sweden)

    Bauer, Tobias

    2017-04-01

    Full Text Available The first record of the oxyopid spider Oxyopes lineatus Latreille, 1806 in Germany is presented together with information on the place of discovery, current distribution and taxonomy. Other interesting spider records from Baden-Württemberg (Germany in the collection of the Natural History Museum Karlsruhe are presented and discussed. Runcinia grammica (C. L. Koch, 1837 and Paratrachelas maculatus (Thorell, 1875 are reported for the first time for Baden-Württemberg; a record of Thanatus arenarius L. Koch, 1872 is the first rediscovery of this species here for over 100 year. The following taxonomical changes, which were proposed by Simon but not followed in the World Spider Catalog, are confirmed: Sphasus lineatus C.L. Koch, 1837 (misidentification and Sphasus lineatus Blackwall, 1861 (misidentification = Oxyopes heterophthalmus (Latreille, 1804.

  4. Kryolize - KT Fund Project

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Safety standards and best practices do exist in the field of cryogenics but, as in most domains, they are generally inserted in a few ‘envelope’ cases commonly used in the industry, whereas applicability to the particularity of research facilities are not fully tailored to its needs. The main objective in these cases is to find a harmonised approach, based on lessons learnt and scientific knowledge. The Kryolize Project was created in order to produce tools with a harmonized approach to size pressure relief devices for cryogenic applications. In view of disseminating such tools to other institutes and industrial partners, the project was submitted to CERN’s KT Fund committee. This talk will focus on the process and deliverables of the KT-Funded Kryolize project, including the method on how to cope with the sizing of pressure relief devices and the R&D collaboration agreement between CERN and Karlsruhe Institute of Technology for an experimental programme.

  5. Measurement of the thermal conductivity and heat transfer coefficient of a binary bed of beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Donne, M.D.; Piazza, G. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reaktortechnik; Goraieb, A.; Sordon, G.

    1998-01-01

    The four ITER partners propose to use binary beryllium pebble bed as neutron multiplier. Recently this solution has been adopted for the ITER blanket as well. In order to study the heat transfer in the blanket the effective thermal conductivity and the wall heat transfer coefficient of the bed have to be known. Therefore at Forschungszentrum Karlsruhe heat transfer experiments have been performed with a binary bed of beryllium pebbles and the results have been correlated expressing thermal conductivity and wall heat transfer coefficients as a function of temperature in the bed and of the difference between the thermal expansion of the bed and of that of the confinement walls. The comparison of the obtained correlations with the data available from the literature show a quite good agreement. (author)

  6. PREFACE: ARENA 2006—Acoustic and Radio EeV Neutrino detection Activities

    Science.gov (United States)

    Thompson, Lee

    2007-06-01

    The International Conference on Acoustic and Radio EeV Neutrino Activities, ARENA 2006 was jointly hosted by the Universities of Northumbria and Sheffield at the City of Newcastle Campus of the University of Northumbria in June 2006. ARENA 2006 was the latest in a series of meetings which have addressed, either separately or jointly, the use of radio and acoustic sensors for the detection of highly relativistic particles. Previous successful meetings have taken place in Los Angeles (RADHEP, 2000), Stanford (2003) and DESY Zeuthen (ARENA 2005). A total of 50 scientists from across Europe, the US and Japan attended the conference presenting status reports and results from a number of projects and initiatives spread as far afield as the Sweden and the South Pole. The talks presented at the meeting and the proceedings contained herein represent a `snapshot' of the status of the fields of acoustic and radio detection at the time of the conference. The three day meeting also included two invited talks by Dr Paula Chadwick and Dr Johannes Knapp who gave excellent summaries of the related astroparticle physics fields of high energy gamma ray detection and high energy cosmic ray detection respectively. As well as a full academic agenda there were social events including a Medieval themed conference banquet at Lumley Castle and a civic reception kindly provided by the Lord Mayor of Newcastle and hosted at the Mansion House. Thanks must go to the International Advisory Board members for their input and guidance, the Local Organising Committee for their hard work in bringing everything together and finally the delegates for the stimulating, enthusiastic and enjoyable spirit in which ARENA 2006 took place. Lee Thompson International Advisory Board G. Anton, ErlangenD. Besson, Kansas J. Blümer, KarlsruheA. Capone, Rome H. Falcke, BonnP. Gorham, Hawaii G. Gratta, StanfordF. Halzen, Madison J. Learned, HawaiiR. Nahnhauer, Zeuthen A. Rostovtzev, MoscowD. Saltzberg, Los Angeles L

  7. 13th International Conference on Integral Methods in Science and Engineering

    CERN Document Server

    Kirsch, Andreas

    2015-01-01

    This contributed volume contains a collection of articles on state-of-the-art developments on the construction of theoretical integral techniques and their application to specific problems in science and engineering.  Written by internationally recognized researchers, the chapters in this book are based on talks given at the Thirteenth International Conference on Integral Methods in Science and Engineering, held July 21–25, 2014, in Karlsruhe, Germany.   A broad range of topics is addressed, from problems of existence and uniqueness for singular integral equations on domain boundaries to numerical integration via finite and boundary elements, conservation laws, hybrid methods, and other quadrature-related approaches.   This collection will be of interest to researchers in applied mathematics, physics, and mechanical and electrical engineering, as well as graduate students in these disciplines and other professionals for whom integration is an essential tool.

  8. Bruno Zumino (1923 - 2014)

    CERN Multimedia

    2014-01-01

    Bruno Zumino died in Berkeley, California, on 21* June, aged 91. His name is mainly associated with the formulation of supersymmetry in four-dimensional space–time.   Bruno Zumino in 1985. (Image credit: Lawrence Berkeley National Laboratory.) Zumino graduated in physics at the University of Rome in 1945 and worked in Göttingen and then at New York University, where he became Chair of the Physics Department. In 1968, he joined the Theory Division at CERN, staying until 1981. It was here that he did his pioneering work with Julius Wess of Karlsruhe in which they formulated the first supersymmetric four-dimensional quantum field theory – the Wess–Zumino model – in 1974. Today supersymmetry is a strong candidate for physics beyond the Standard Model and provides some candidate particles for dark matter. In 1976, two years after its formulation, supersymmetry was combined with the gravitational force, giving birth to supergravity and stunning deve...

  9. Sloterdijk en Politique.

    Directory of Open Access Journals (Sweden)

    Emmanuelle Tricoire

    2003-11-01

    Full Text Available On entendit parler de Sloterdijk (prononcez Sloterdêk en France en 1999, lorsque « l'affaire Sloterdijk » défraya la chronique après une intervention du philosophe dans un colloque intitulé « Au-delà de l'être. La philosophie après Heidegger ». Professeur à l'Université de Karlsruhe, son intervention intitulée Règles pour le parc humain : réponse à la lettre sur l'humanisme évoque l'humanisme européen. Elle provoqua des réactions fortes, notamment ...

  10. 21st International Conference on Few-Body Problems in Physics

    CERN Document Server

    2015-01-01

    The 21st International Conference on Few-Body Problems in Physics (FB21) will take place at the Crowne Plaza Chicago Metro Downtown Hotel in the West Loop area of Chicago, Illinois, USA, from May 18th to 22nd, 2015. The first conference of this series took place in London in 1959 and subsequent meetings were held in Brela (1967), Birmingham (1969), Budapest (1971), Los Angeles (1972), Laval (1974), Delhi (1976), Graz (1978), Eugene (1980), Karlsruhe (1983), Sendai (1986), Vancouver (1989), Adelaide (1992), Williamsburg (1994), Groningen (1997), Taipei (2000), Durham (2003),Santos (2006),Bonn (2009),and Fukuoka (2012) see also "History". FB21 will be conducted with the principles passed by the General Assembly in 2008. In particular, no bona fide scientist will be excluded from participation on the grounds of national origin, nationality, or political considerations unrelated to science.

  11. Construction and test of a high power injector of hydrogen cluster ions

    CERN Document Server

    Becker, E W; Hagena, O F; Henkes, P R W; Klingelhofer, R; Moser, H O; Obert, W; Poth, I

    1979-01-01

    A high power injector of hydrogen cluster ions, rated for 1 MV and 100 kW, is described. The injector is split in three separate tanks connected by a 1 MV transfer line. The cluster ion beam source and all its auxiliary equipment is placed at high voltage, insulated by SF/sub 6/ gas at pressure of 4 bar. The main components of the injector are: The cluster ion beam source with integrated helium cryopumps, the CERN type acceleration tube with 750 mm ID, the beam dump designed to handle the mass and energy flux under DC conditions, a 1 MV high voltage terminal for the auxiliary equipment supplied by its 40 kVA power supply with power, and the 1 MV 120 kW DC high voltage generator. This injector is installed in Karlsruhe. Performance tests were carried out successfully. It is intended to use this injector for refuelling experiments at the ASDEX Tokamak. (12 refs).

  12. Optical characterisation of lithium fluoride detectors for broadband X-ray imaging

    Energy Technology Data Exchange (ETDEWEB)

    Heidari Bateni, S. [Physics Department, University Roma Tre, Via della Vasca Navale 84, 00146 Rome (Italy); Bonfigli, F., E-mail: francesca.bonfigli@enea.it [ENEA, Photonics Micro- and Nano-structures Laboratory, UTAPRAD-MNF, C.R. Frascati, Via E. Fermi 45, 00044 Frascati (Rome) (Italy); Cecilia, A.; Baumbach, T. [Research Center Karlsruhe/K.I.T., Institute for Synchrotron Radiation—ANKA (Germany); Pelliccia, D. [Research Center Karlsruhe/K.I.T., Institute for Synchrotron Radiation—ANKA (Germany); School of Physics, Monash University—ARC Centre of Excellence for Coherent X-ray Science, Victoria (Australia); Somma, F. [Physics Department, University Roma Tre, Via della Vasca Navale 84, 00146 Rome (Italy); Vincenti, M.A.; Montereali, R.M. [ENEA, Photonics Micro- and Nano-structures Laboratory, UTAPRAD-MNF, C.R. Frascati, Via E. Fermi 45, 00044 Frascati (Rome) (Italy)

    2013-08-21

    Novel X-ray imaging detectors based on photoluminescence of colour centres in lithium fluoride (LiF) have been proposed and tested for extreme ultraviolet, soft and hard X-rays up to 10 keV. For the first time we present the optical characterisation of LiF crystals and thin films irradiated at the TOPO–TOMO beamline of synchroton light source Anka (Karlsruhe, Germany) in the energy range 6–40 keV for different exposure times. Absorption and photoluminescence spectra were analysed to study the optical response of the LiF-based detectors. High resolved X-ray imaging of commercial test patterns has been obtained on LiF crystals and films by optical readout with a confocal laser scanning fluorescence microscope.

  13. Compatibility of high-Δm2 νe and ν¯e neutrino oscillation searches

    Science.gov (United States)

    Aguilar-Arevalo, A. A.; Anderson, C. E.; Bazarko, A. O.; Brice, S. J.; Brown, B. C.; Bugel, L.; Cao, J.; Coney, L.; Conrad, J. M.; Cox, D. C.; Curioni, A.; Djurcic, Z.; Finley, D. A.; Fleming, B. T.; Ford, R.; Garcia, F. G.; Garvey, G. T.; Green, C.; Green, J. A.; Hart, T. L.; Hawker, E.; Imlay, R.; Johnson, R. A.; Karagiorgi, G.; Kasper, P.; Katori, T.; Kobilarcik, T.; Kourbanis, I.; Koutsoliotas, S.; Laird, E. M.; Linden, S. K.; Link, J. M.; Liu, Y.; Liu, Y.; Louis, W. C.; Mahn, K. B. M.; Marsh, W.; Martin, P. S.; McGregor, G.; Metcalf, W.; Meyers, P. D.; Mills, F.; Mills, G. B.; Monroe, J.; Moore, C. D.; Nelson, R. H.; Nguyen, V. T.; Nienaber, P.; Ouedraogo, S.; Patterson, R. B.; Perevalov, D.; Polly, C. C.; Prebys, E.; Raaf, J. L.; Ray, H.; Roe, B. P.; Russell, A. D.; Sandberg, V.; Schirato, R.; Schmitz, D.; Shaevitz, M. H.; Shoemaker, F. C.; Smith, D.; Soderberg, M.; Sorel, M.; Spentzouris, P.; Stancu, I.; Stefanski, R. J.; Sung, M.; Tanaka, H. A.; Tayloe, R.; Tzanov, M.; van de Water, R.; Wascko, M. O.; White, D. H.; Wilking, M. J.; Yang, H. J.; Zeller, G. P.; Zimmerman, E. D.

    2008-07-01

    This article presents the compatibility of experimental data from neutrino oscillation experiments with a high-Δm2 two-neutrino oscillation hypothesis. Data is provided by the Bugey, Karlsruhe Rutherford Medium Energy Neutrino Experiment 2 (KARMEN2), Los Alamos Liquid Scintillator Neutrino Detector (LSND), and MiniBooNE experiments. The LSND, KARMEN2, and MiniBooNE results are 25.36% compatible within a two-neutrino oscillation hypothesis. However, the point of maximal compatibility is found in a region that is excluded by the Bugey data. A joint analysis of all four experiments, performed in the sin⁡22θvsΔm2 region common to all data, finds a maximal compatibility of 3.94%. This result does not account for additions to the neutrino oscillation model from sources such as CP violation or sterile neutrinos.

  14. Petal Integration for the CMS Tracker End Caps

    CERN Document Server

    Bergauer, Thomas; Friedl, Markus; Hansel, S; Hrubec, Josef; Krammer, Manfred; Pernicka, Manfred; Beaumont, Willem; De Wolf, Eddi A; Bouhali, Othmane; Clerbaux, Barbara; Dewulf, Jean-Paul; De Lentdecker, Gilles; Mahmoud, Tariq; Neukermans, Lionel; Van der Velde, C; Vanlaer, Pascal; Wickens, John; D'Hondt, Jorgen; Goorens, Robert; Heyninck, Jan; Tavernier, Stefaan; Udo, Fred; Van Lancker, Luc; Bonnet, Jean-Luc; De Callatay, Bernard; Delaere, Christophe; Florins, Benoit; Grégoire, Ghislain; Keutgen, Thomas; Lemaître, Vincent; Michotte, Daniel; Militaru, Otilia; Piotrzkowski, Krzysztof; Rouby, Xavier; Teyssier, Daniel; Van der Donckt, M; Ageron, Michel; Baulieu, Guillaume; Bonnevaux, Alain; Boudoul, Gaelle; Chabanat, Eric; Chabert, Eric Christian; Contardo, Didier; Della Negra, Rodolphe; Estre, Nicolas; Giraud, Noël; Haroutunian, Roger; Lumb, Nicholas; Mirabito, Laurent; Perriès, Stephane; Trocmé, Benjamin; Vanzetto, Sylvain; Agram, Jean-Laurent; Drouhin, Frédéric; Ernenwein, Jean-Pierre; Fontaine, Jean-Charles; Berst, Jean-Daniel; Brom, Jean-Marie; Didierjean, Francois; Hosselet, J; Goerlach, Ulrich; Graehling, Philippe; Gross, Laurent; Juillot, Pierre; Lounis, Abdenour; Maazouzi, Chaker; Ollivetto, C; Strub, Roger; Van Hove, Pierre; Adolphi, Roman; Brauer, Richard; Braunschweig, Wolfgang; Esser, Hans; Feld, Lutz; Karpinski, Waclaw; Klein, Katja; König, Stefan; Kosbow, M; Lübelsmeyer, Klaus; Olzem, Jan; Ostapchuk, Andrey; Pandoulas, Demetrios; Pierschel, Gerhard; Schael, Stefan; Schmitz, Stefan Antonius; Schultz von Dratzig, Arndt; Siedling, Rolf; Weber, Markus; Wittmer, Bruno; Wlochal, Michael; Beissel, Franz; Bock, E; Flossdorf, E; Flügge, Günter; Hermanns, Thomas; Heydhausen, Dirk; Jahn, Dieter; Kaussen, Gordon; Linn, Alexander; Poettgens, Michael; Pooth, Oliver; Stahl, Achim; Zoeller, Marc Henning; Butz, Erik; Flucke, Gero; Klanner, Robert; Pein, Uwe; Schirm, Norbert; Schleper, Peter; Steinbruck, G; Stoye, Markus; Van Staa, Rolf; Atz, Bernd; Blüm, Peter; de Boer, Wim; Bogelsbacher, F; Barvich, Tobias; Dehm, Philip; Dierlamm, Alexander; Dirkes, Guido; Fahrer, Manuel; Fernández, J; Frey, Martin; Furgeri, Alexander; Gregoriev, E; Hartmann, Frank; Heier, Stefan; Kaminski, Jochen; Ledermann, Bernhard; Muller, Th; Piaseki, C; Sabellek, Andreas; Simonis, Hans-Jürgen; Steck, Pia; Theel, Andreas; Weiler, Thomas; Weseler, Siegfried; Zhukov, Valery; Freudenreich, Klaus

    2008-01-01

    This note describes the assembly and testing of the 292 petals built for the CMS Tracker End Caps from the beginning of 2005 until the summer of 2006. Due to the large number of petals to be assembled and the need to reach a throughput of 10 to 15 petals per week, a distributed integration approach was chosen. This integration was carried out by the following institutes: I. and III. Physikalisches Institut - RWTH Aachen University; IIHE, ULB \\& VUB Universities, Brussels; Hamburg University; IEKP, Karlsruhe University; FYNU, Louvain University; IPN, Lyon University; and IPHC, Strasbourg University. Despite the large number of petals which needed to be reworked to cope with a late-discovered module issue, the quality of the petals is excellent with less than 0.2\\% bad channels.

  15. Corrosion of canister materials for radioactive waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Kienzler, Bernhard [KIT Karlsruhe (Germany). Institut fuer Nukleare Entsorgung (INE)

    2017-08-15

    In the period between 1980 and 2004, corrosion studies on various metallic materials have been performed at the Research Center Karlsruhe. The objectives of these experimental studies addressed mainly the performance of canister materials for heat producing, high-level wastes and spent nuclear fuels for a repository in a German salt dome. Additional studies covered the performance of steels for packaging wastes with negligible heat production under conditions to be expected in rocksalt and in the Konrad iron ore mine. The results of the investigations have been published in journals and conference proceedings but also in ''grey literature''. This paper presents a summary of the results of corrosion experiments with fine-grained steels and nodular cast steel.

  16. Results from KASCADE-Grande

    Energy Technology Data Exchange (ETDEWEB)

    Bertaina, M., E-mail: bertaina@to.infn.it [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Apel, W.D. [Institut fuer Kernphysik, KIT - Karlsruher Institut fuer Technologie (Germany); Arteaga-Velazquez, J.C. [Universidad Michoacana, Instituto de Fisica y Matematicas, Morelia (Mexico); Bekk, K. [Institut fuer Kernphysik, KIT - Karlsruher Institut fuer Technologie (Germany); Bluemer, J. [Institut fuer Kernphysik, KIT - Karlsruher Institut fuer Technologie (Germany); Institut fuer Experimentelle Kernphysik, KIT - Karlsruher Institut fuer Technologie (Germany); Bozdog, H. [Institut fuer Kernphysik, KIT - Karlsruher Institut fuer Technologie (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Buchholz, P. [Fachbereich Physik, Universitaet Siegen (Germany); Cantoni, E. [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Istituto di Fisica dello Spazio Interplanetario, INAF Torino (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, KIT - Karlsruher Institut fuer Technologie (Germany); and others

    2012-11-11

    The KASCADE-Grande experiment, located at Karlsruhe Institute of Technology (Germany) is a multi-component extensive air-shower experiment devoted to the study of cosmic rays and their interactions at primary energies 10{sup 14}-10{sup 18} eV. Main goals of the experiment are the measurement of the all-particle energy spectrum and mass composition in the 10{sup 16}-10{sup 18} eV range by sampling charged (N{sub ch}) and muon (N{sub {mu}}) components of the air shower. The method to derive the energy spectrum and its uncertainties, as well as the implications of the obtained result, is discussed. An overview of the analyses performed by KASCADE-Grande to derive the mass composition of the measured high-energy comic rays is presented as well.

  17. Status of the KASCADE-Grande experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kampert, K.-H. E-mail: Karl-Heinz.Kampert@ik.fzk.de; Antoni, T.; Apel, W.D.; Badea, F.; Bekk, K.; Bercuci, A.; Bertaina, M.; Bluemer, H.; Bozdog, H.; Brancus, I.M.; Buetner, C.; Chiavassa, A.; Daumiller, K.; Doll, P.; Engler, J.; Fessler, F.; Ghia, P.L.; Gils, H.J.; Glasstetter, R.; Haeusler, R.; Haungs, A.; Heck, D.; Hoerandel, J.R.; Iwan, A.; Klages, H.O.; Maier, G.; Mathes, H.J.; Mayer, H.J.; Martello, D.; Milke, J.; Morello, C.; Mueller, M.; Navarra, G.; Obenland, R.; Oehlschlaeger, J.; Ostapchenko, S.; Petcu, M.; Rebel, H.; Roth, M.; Schieler, H.; Scholz, J.; Thouw, T.; Trinchero, G.C.; Ulrich, H.; Ulrich, R.; Weber, J.H.; Weindl, A.; Wentz, J.; Wochele, J.; Zabierowski, J.; Zagromski, S

    2003-07-01

    The status and capabilities of the KASCADE-Grande extensive air shower experiment are presented. The installation is located at Forschungszentrum Karlsruhe and comprises a large collecting area (0.5 km{sup 2}) electromagnetic array (Grande) operated jointly with the existing KASCADE detectors. KASCADE-Grande will cover the primary energy range 10{sup 16} eV < E{sub 0} < 10{sup 18} eV overlapping with KASCADE around 1016 eV, thus providing continuous information on the primary energy and mass of cosmic rays from 3 {center_dot} 1014 eV up to 10{sup 18} eV. The major goal of the measurements is the unambiguous observation of the 'iron knee' expected in the cosmic ray spectrum at E{sub k}{sup Fe} {approx} 10{sup 17} eV.

  18. Cosmic Ray Air Shower Detection with LOPES

    Energy Technology Data Exchange (ETDEWEB)

    Haungs, A. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany)], E-mail: haungs@ik.fzk.de; Apel, W.D.; Arteaga, J.C. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Asch, T. [Inst. Prozessdatenverarb. und Elektronik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Badea, A.F. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Baehren, L. [ASTRON, 7990 AA Dwingeloo (Netherlands); Bekk, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie, 53010 Bonn (Germany); Bluemer, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Bozdog, H. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, P.O. Box Mg-6, RO-7690 Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen, 57068 Siegen (Germany); Buitink, S. [Dept. of Astrophysics, Radboud University Nijmegen, 6525 ED Nijmegen (Netherlands); Butcher, H. [ASTRON, 7990 AA Dwingeloo (Netherlands); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Daumiller, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Di Pierro, F. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy)] (and others)

    2008-01-15

    LOPES is set up at the location of the KASCADE-Grande extensive air shower experiment in Karlsruhe, Germany and aims to investigate radio pulses from extensive air showers experimentally and theoretically. Data taken during half a year of operation of 10 LOPES antennas (LOPES-10), triggered by EAS observed with KASCADE-Grande have been analysed. We report about the results of correlations with shower parameters present in the radio signals measured by LOPES-10. The extended setup LOPES-30 consists of 30 antennas which have an absolute calibration and the data of which will be compared with expectations from detailed Monte-Carlo simulations. In addition, LOPES operates antennas of a different type (LOPES{sup STAR}) which are optimized for an application at the Pierre Auger Observatory.

  19. Towards the energy spectrum and composition of primary cosmic rays in the knee region: methods and results at KASCADE

    Energy Technology Data Exchange (ETDEWEB)

    Haungs, A. E-mail: haungs@ik3.fzk.de; Antoni, T.; Apel, W.D.; Badea, F.; Bekk, K.; Bernloehr, K.; Bluemer, H.; Bollmann, E.; Bozdog, H.; Brancus, I.M.; Buettner, C.; Chilingarian, A.; Daumiller, K.; Doll, P.; Engler, J.; Fessler, F.; Gils, H.J.; Glasstetter, R.; Haeusler, R.; Hafemann, W.; Heck, D.; Hoerandel, J.R.; Holst, T.; Kampert, K.-H.; Kempa, J.; Klages, H.O.; Knapp, J.; Martello, D.; Mathes, H.J.; Matussek, P.; Mayer, H.J.; Milke, J.; Muehlenberg, D.; Oehlschlaeger, J.; Petcu, M.; Rebel, H.; Risse, M.; Roth, M.; Schatz, G.; Thouw, T.; Ulrich, H.; Vardanyan, A.; Vulpescu, B.; Weber, J.H.; Wentz, J.; Wiegert, T.; Wochele, J.; Zabierowski, J.; Zagromski, S

    2001-04-01

    KASCADE (KArlsruhe Shower Core and Array DEtector) is a multi-detector setup to observe the electromagnetic, muonic and hadronic air shower components simultaneously at primary energies in the region of the 'knee'. A large number of observables per single shower are registered. The main aims of the experiment are the determination of the primary energy spectrum around the 'knee' and the energy variation of the chemical composition. The measurements reveal an increasing mean mass of the primary cosmic rays above the observed kink, and a sharper knee for the light primary component than for the all-particle spectrum, and the absence of a knee for the heavy component between 1 and 10 PeV.

  20. Recent results of KASCADE phenomenology of extensive air showers

    Energy Technology Data Exchange (ETDEWEB)

    Schatz, G. E-mail: bgschatz@t-online.de; Antoni, T.; Apel, W.D.; Badea, F.; Bekk, K.; Bernloehr, K.; Bluemer, H.; Bollmann, E.; Bozdog, H.; Brancus, I.M.; Buettner, C.; Chilingarian, A.; Daumiller, K.; Doll, P.; Engler, J.; Fessler, F.; Gils, H.J.; Glasstetter, R.; Haeusler, R.; Hafemann, W.; Haungs, A.; Heck, D.; Hoerandel, J.R.; Holst, T.; Kampert, K.-H.; Kempa, J.; Klages, H.O.; Knapp, J.; Martello, D.; Mathes, H.J.; Matussek, P.; Mayer, H.J.; Milke, J.; Muehlenberg, D.; Oehlschlaeger, J.; Petcu, M.; Rebel, H.; Risse, M.; Roth, M.; Thouw, T.; Ulrich, H.; Vardanyan, A.; Vulpescu, B.; Weber, J.H.; Wentz, J.; Wiegert, T.; Wochele, J.; Zabierowski, J.; Zagromski, S

    2001-04-01

    KASCADE (KArlsruhe Shower Core and Array DEtector) is a multi-detector setup to observe the electromagnetic, muonic and hadronic air shower components simultaneously in the energy region around the 'knee' of the primary spectrum. Its main aim is to determine energy spectrum and composition of hadrons in primary cosmic rays. This is attempted by registering a large number of observables for each EAS including measurements of electrons, muons and hadrons. This contribution gives a short description of the experiment and then presents some results on the lateral distributions of various particle types and on the spectrum of hadrons. The status of our analyses to determine mass composition is presented in an accompanying contribution by A. Haungs.

  1. The LOPES experiment - Recent results, status and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Huege, T., E-mail: tim.huege@kit.edu [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Apel, W.D. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Arteaga, J.C. [Karlsruhe Institute of Technology (KIT) - Campus South, Institut fuer Experimentelle Kernphysik (Germany); Asch, T. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Prozessdatenverarbeitung und Elektronik (Germany); Baehren, L. [Radboud University Nijmegen, Department of Astrophysics (Netherlands); Bekk, K. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell& #x27; Universita Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie Bonn (Germany); Bluemer, J. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Karlsruhe Institute of Technology (KIT) - Campus South, Institut fuer Experimentelle Kernphysik (Germany); Bozdog, H. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Buchholz, P. [Universitaet Siegen, Fachbereich Physik (Germany); Buitink, S. [Radboud University Nijmegen, Department of Astrophysics (Netherlands); Cantoni, E. [Dipartimento di Fisica Generale dell& #x27; Universita Torino (Italy); INAF Torino, Istituto di Fisica dello Spazio Interplanetario (Italy); and others

    2012-01-11

    The LOPES experiment at the Karlsruhe Institute of Technology has been taking radio data in the frequency range from 40 to 80 MHz in coincidence with the KASCADE-Grande air shower detector since 2003. Various experimental configurations have been employed to study aspects such as the energy scaling, geomagnetic dependence, lateral distribution, and polarization of the radio emission from cosmic rays. The high quality per-event air shower information provided by KASCADE-Grande has been the key to many of these studies and has even allowed us to perform detailed per-event comparisons with simulations of the radio emission. In this article, we give an overview of results obtained by LOPES, and present the status and perspectives of the ever-evolving experiment.

  2. Cosmic ray physics around the knee with the KASCADE experiment

    Energy Technology Data Exchange (ETDEWEB)

    Haungs, A.; Antoni, T.; Apel, W.D.; Bekk, K.; Bernloehr, K.; Bluemer, H.; Bollmann, E.; Buettner, C.; Doll, P.; Engler, J.; Fessler, F.; Gils, H. J.; Haeusler, R.; Hafemann, W.; Heck, D.; Holst, T.; Kampert, K.-H.; Klages, H. O.; Mathes, H. J.; Matussek, P.; Mayer, H. J.; Milke, J.; Muehlenberg, D.; Oehlschlager, J.; Rebel, H.; Risse, M.; Roth, M.; Schatz, G.; Thouw, T.; Ulrich, H.; Weber, J. H.; Wentz, J.; Wiegert, T.; Wochele, J.; Zagromski, S. [Forschungszentrum Karlsruhe, Institut fuer Kernphysik, Karlsruhe (Germany); Badea, F.; Bozdog, H.; Petcu, M.; Vulpescu, B. [Institute of Physics and Nuclear Engineering, Bucharest (Romania); Daumiller, K.; Glasstetter, R.; Knapp, J.; Martello, D. [Karlsruhe Univ., Karlsruhe (Germany). Institut fuer Experimentelle Kernphysik; Vardanyan, A. [Yerevan Physics Institute, Cosmic Ray Division, Yerevan (Armenia); Kempa, J. [Lodz Univ., Lodz (Poland). Dept. of Experimental Physics; Zabierowski, J. [Soltan Institute for Nuclear Studies, Lodz (Poland)

    2001-10-01

    KASCADE (Karlsruhe Shower Core and Array DEtector) is a multidetector setup to observe the electromagnetic, muonic and hadronic air shower components simultaneously for the primary energy region around the knee. The large body of observables per single shower allows to follow the main aims of the experiment in analyses on an event-by-event basis, mainly: 1) slopes and structures of the primary energy spectrum; 2) the energy dependence of the chemical composition of the primaries; 3) tests of the air shower simulation tools underlying the analyses, in particular of the Monte Carlo generators based on different high-energy interaction models; 4) examinations of the air shower development in the atmosphere. Examples and results of different analysis methods are presented for the different subjects.

  3. Probabilistic BPRRC: Robust Change Detection against Illumination Changes and Background Movements

    Science.gov (United States)

    Yokoi, Kentaro

    This paper presents Probabilistic Bi-polar Radial Reach Correlation (PrBPRRC), a change detection method that is robust against illumination changes and background movements. Most of the traditional change detection methods are robust against either illumination changes or background movements; BPRRC is one of the illumination-robust change detection methods. We introduce a probabilistic background texture model into BPRRC and add the robustness against background movements including foreground invasions such as moving cars, walking people, swaying trees, and falling snow. We show the superiority of PrBPRRC in the environment with illumination changes and background movements by using three public datasets and one private dataset: ATON Highway data, Karlsruhe traffic sequence data, PETS 2007 data, and Walking-in-a-room data.

  4. An Analysis of the Thermal and Structure Behaviour of the UO{sub 2}-PuO{sub 2}-Fuel in the Irradiation Experiment of the UO{sub 2}-PuO{sub 2}-Fuel in the Irradiation Experiment FR2 Capsule Test Series 5a; Analisis termico y estructural del combustible UO{sub 2}-PuO{sub 2} irradiado en el reactor FR2 dentro del experimento KVE-Vg.5a

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Jimenez, J.; Helmut, E.

    1981-07-01

    In the Karlsruhe research reactor FR2 nine fuel pins were irradiated within three irradiation capsules in the course of the test series 5a. The pins contained UO{sub 2}-PuO{sub 2} fuel pellets. They reached bump values of about 6, 17 and 47 Mwd/Kg Me with linear rod powers of 400 to 600 W/cm and clad surface temperature between 500 and 700 degree centigree. A detailed analysis of the fuel structuration data (columnar-grain and equiaxed- -grain growth regions) have allowed to determine, with the help of physic-mathematical models, the radii of these regions and the heat transfer through the contact zone between fuel and clad depending on the bump. The results of the analysis showed that the fuel surface temperature rose with increasing burnup. (Author) 16 refs.

  5. Effects of some metals on beech ectomycorrhizae with special reference to Cenococcum geophilum (Fr. ). An in vivo and in vitro study. In vivo und in vitro Untersuchungen zur Schadwirkung einiger Metalle and Buchen-Ektomykorrhizen mit besonderer Beruecksichtigung von Cenococcum geophilum Fr

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, H.P.

    1989-07-12

    This thesis tries to establish whether damage of the mycorrhiza could be one of the causes of the new type of forest decline. In vivo and in vitro examinations on beech mycorrhiza were carried out to investigate whether a hypothetically assumed disorder in the ectomycorrhiza symbiosis can be caused by substratum changes, for instance. It was presumed that such disorders would be structurally noticeable. For this purpose, the beech mycorrhiza of two long term observation sites near Karlsruhe were investigated as to vitality in forests affected by forest decline. Root samples taken at regular intervals during 1985 and 1986 from areas of severely damaged beeches and from areas of undamaged to lightly damaged beeches were prepared for cytological examinations. As the analysis of trace elements showed increased metal contents, particularly of copper, in the ground of damaged trees, experiments with artificial mycorrhizal formation and mycelium cultures were carried out to check the above mentioned hypothesis. Test fungus was Cenococcum geophilum. (orig.).

  6. Cooling unit for a superconducting power cable. Two years successful operation

    Energy Technology Data Exchange (ETDEWEB)

    Herzog, Friedhelm [Messer Group GmbH, Krefeld (Germany); Kutz, Thomas [Messer Industriegase GmbH, Bad Soden (Germany); Stemmle, Mark [Nexans Deutschland GmbH, Hannover (Germany); Kugel, Torsten [Westnetz GmbH, Essen (Germany)

    2016-07-01

    High temperature super conductors (HTS) can efficiently be cooled with liquid nitrogen down to a temperature of 64 K (-209 C). Lower temperatures are not practical, because nitrogen becomes solid at 63 K (-210 C). To achieve this temperature level the coolant has to be vaporized below atmospheric pressure. Messer has developed a cooling unit with an adequate vacuum subcooler, a liquid nitrogen circulation system, and a storage vessel for cooling an HTS power cable. The cooling unit was delivered in 2013 for the German AmpaCity project of RWE Deutschland AG, Nexans and Karlsruhe Institute of Technology. Within this project RWE and Nexans installed the worldwide longest superconducting power cable in the city of Essen, Germany. The cable is in operation since March 10th, 2014.

  7. Simulation of the Quench-06 experiment with Scdapsim; Simulacion del experimento Quench-06 con Scdapsim

    Energy Technology Data Exchange (ETDEWEB)

    Angel M, E. del; Nunez C, A.; Amador G, R. [CNSNS, Dr. Barragan No. 779, 03020 Mexico D.F. (Mexico)]. e-mail: edangelm@cnsns.gob.mx

    2003-07-01

    The present work describes the pattern of the called Quench installation developed and used by the National Commission of Nuclear Security and Safeguards (CNSNS) for their participation in the International Standard Problem 45 (ISP), organized by the Nuclear Energy Agency (NEA). The exercise consisted on the simulation of the denominated experiment Quench-06 carried out in the experimental installation Quench located in the Forschungszentrum laboratory in Karlsruhe, Germany. The experiment Quench-06 consisted on simulating the sudden and late injection of water in a fuel assemble for a pressurized reactor (PWR). The CNSNS uses the version bd of the SCDAPSIM code developed by the company Innovative Software Systems (ISS) to simulate this experiment. The obtained results showed that the code is able to predict the experiment partially when overestimating the hydrogen production and of the partial fused of some fuel pellets, but predicting correctly the damage in the shroud. (Author)

  8. The Atomic Law, the German Bundesrat and the administrative organisation; Das Atomrecht, der Bundesrat und die Verwaltungsorganisation

    Energy Technology Data Exchange (ETDEWEB)

    Burgi, Martin [Bochum Univ. (Germany). Lehrstuhl fuer Deutsches und Europaeisches Oeffentliches Recht, insbesondere Wirtschaftsverfassungs- und Wirtschaftsverwaltungsrecht

    2011-02-24

    Soon, the Federal Constitutional Court (Karlsruhe, Federal Republic of Germany) will deal with both the Eleventh Amendment of the Atomic Energy Act effecting the extension of the operating period of nuclear power plants as well as with the Twelfth Amendment of the Atomic Energy Act which in particular contains some security-related regulations due to European legal occasion. The emphasis is on the Article 87c of the Basic Law. According to Article 87c of the Basic Law, the legislation in the field of nuclear law requires the consent of the German Bundesrat. The possible of approval of both laws is subject to certain administrative organization legal circumstances. The sober investigation and evaluation of these circumstances in the context of Article 83 et seq. of the Basic Law results to the conclusion that the two amending laws do not require the consent of the German Bundesrat.

  9. The stellar neutron capture cross section of 60Fe

    Energy Technology Data Exchange (ETDEWEB)

    Reifarth, Rene; Heil, Michael [GSI, Planckstr. 1, 64291 Darmstadt (Germany); Schumann, Dorothea [PSI, 5313 Villigen (Switzerland); Dillmann, Iris; Domingo-Pardo, Cesar; Kaeppeler, Franz; Maganiec, Justyna; Voss, Fritz; Walter, Stefan [FZK, P.O. Box 3640, 76021 Karlsruhe (Germany); Uberseder, Ethan; Goerres, Joachim; Wiescher, Michael [University of Notre Dame, Physics Department, Notre Dame, IN 46556 (United States)

    2008-07-01

    60Fe is one of the most interesting radioisotopes found on earth. With an halflife of 1.5 Myr it is sensitive to the younger history of the universe (seen as 60Co decays) and the earth (seen as 60Fe in deep see manganese crusts), but contains basically no pre-solar information. In order to use the observational information in a quantitative manner, production and destruction mechanisms of 60Fe have to be understood. Therefore we measured the neutron capture cross section of 60Fe in the astrophysically interesting energy region applying the activation technique at the Forschungszentrum Karlsruhe (FZK). The sample material of 1.1{sup *}10{sup **}16 atoms has been retrieved from a cupper beam stop, which has been irradiated with protons at the Paul Scherrer Institute (PSI).

  10. Status of the development of the EU 170 GHz/1 MW/CW gyrotron

    Energy Technology Data Exchange (ETDEWEB)

    Pagonakis, Ioannis Gr., E-mail: ioannis.pagonakis@kit.edu [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Albajar, Ferran [The European Joint Undertaking for ITER and The Development of Fusion Energy, Barcelona (Spain); Alberti, Stefano [École Polytechnique Fédérale de Lausanne, Centre de Recherches en Physique des Plasmas (CRPP), Lausanne (Switzerland); Avramidis, Konstantinos [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Bonicelli, Tullio [The European Joint Undertaking for ITER and The Development of Fusion Energy, Barcelona (Spain); Braunmueller, Falk [École Polytechnique Fédérale de Lausanne, Centre de Recherches en Physique des Plasmas (CRPP), Lausanne (Switzerland); Bruschi, Alex [Plasma Physics Institute, National Research Council of Italy, Milano (Italy); Chelis, Ioannis [School of Electrical and Computer Engineering, National Technical University of Athens (Greece); Cismondi, Fabio [The European Joint Undertaking for ITER and The Development of Fusion Energy, Barcelona (Spain); Gantenbein, Gerd [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Hermann, Virgile [Thales Electron Devices (TED), Vélizy-Villacoublay (France); Hesch, Klaus [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Hogge, Jean-Philippe [École Polytechnique Fédérale de Lausanne, Centre de Recherches en Physique des Plasmas (CRPP), Lausanne (Switzerland); Jelonnek, John; Jin, Jianbo; Illy, Stefan [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Ioannidis, Zisis C. [Faculty of Physics, National and Kapodistrian University of Athens (Greece); Kobarg, Thorsten [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); and others

    2015-10-15

    The progress in the development of the European 170 GHz, 1 MW/CW gyrotron for electron cyclotron heating & current drive (ECH&CD) on ITER is reported. A continuous wave (CW) prototype is being manufactured by Thales Electron Devices (TED), France, while a short-pulse (SP) prototype gyrotron is in parallel under manufacture at Karlsruhe Institute of Technology (KIT), with the purpose of validating the design of the CW industrial prototype components. The fabrication of most of the sub-assemblies of the SP prototype has been completed. In a first step, an existing magnetron injection gun (MIG) available at KIT was used. Despite this non-ideal configuration, the experiments provided a validation of the design, substantiated by an excellent agreement with numerical simulations. The tube, operated without a depressed collector, is able to produce more than 1 MW of output power with efficiency in excess of 30%, as expected, and compatible with the ITER requirements.

  11. Field quality of 1.5 m long conduction cooled superconducting undulator coils with 20 mm period length

    Science.gov (United States)

    Casalbuoni, S.; Glamann, N.; Grau, A. W.; Holubek, T.; Saez de Jauregui, D.; Boffo, C.; Gerhard, Th A.; Turenne, M.; Walter, W.

    2017-07-01

    The Institute for Beam Physics and Technology (IBPT) at the Karlsruhe Institute of Technology (KIT) and the industrial partner Babcock Noell GmbH (BNG) are collaborating since 2007 on the development of superconducting undulators both for ANKA and low emittance light sources. The first full length device with 15 mm period length has been successfully tested in the ANKA storage ring for one year. The next superconducting undulator has 20 mm period length (SCU20) and is also planned to be installed in the accelerator test facility and synchrotron light source ANKA. The SCU20 1.5 m long coils have been characterized in a conduction cooled horizontal test facility developed at KIT IBPT. Here we present the local magnetic field and field integral measurements, as well as their analysis including the expected photon spectrum.

  12. Signatures of Dirac-Weyl fermions in long organic molecules

    Science.gov (United States)

    Korytar, Richard; Xenioti, Dimitra; Schmitteckert, Peter; Alouani, Mebarek; Evers, Ferdinand

    2014-03-01

    Oligoacenes are molecules which consist of N linearly fused benzene rings. They have been subject of intensive research since they were suspected to support correlated ground states with charge or spin ordering. In addition, they have been considered promising for technological application in organic electronics. We use ab-intio calculations in order to investigate how the optical gap of the molecule decreases with increasing length N. Intriguingly, we find that the limit of a metallic wire is reached with strong oscillations that exhibit periodicity with several periods that are not commensurate with the lattice symmetries. In particular, at certain magical values N*=10, 21, 32,... the gap is (almost) vanishing and revives again at intermediate values. An explanation will be offered in terms of a band-structure argument. DFG-Center of Functional Nanostructures, DFG Priority Program 1243, HC3 - SCC cluster of the Karlsruhe Institute of Technology.

  13. Beam heat load and pressure rise in a cold vacuum chamber

    Directory of Open Access Journals (Sweden)

    S. Casalbuoni

    2007-09-01

    Full Text Available The beam heat load and the pressure in the vacuum chamber of the cold bore superconducting undulator installed at ANKA (ANgstrom source KArlsruhe have been monitored for almost two years. Possible sources of the observed heat load could be synchrotron radiation from upstream magnets, image currents, electron and ion bombardment. In this paper, the various possible contributions to the heat load are discussed and compared with experimental results. The dynamic pressure increases nonlinearly with the average beam current. The current where it assumes a maximum varies both with the bunch intensity and with the initial vacuum pressure. A correlation between the heat load and the dynamic pressure has been observed. This study suggests that electron bombardment could explain the beam heat load and pressure rise observed for a bunch length of 10 mm.

  14. Large-scale, high-resolution wind resource mapping for wind farm planning and development in South Africa

    DEFF Research Database (Denmark)

    Mortensen, Niels Gylling; Badger, Jake; Hansen, Jens Carsten

    2014-01-01

    estimates are designed for national and provincial planning and strategic environmental impact assessment for wind power in South Africa and the results have therefore been made available in common GIS formats. The database of results is in the public domain and can be downloaded from the WASA web site......Numerical wind atlas data at 5 km resolution have been used to map the wind resources of the Wind Atlas for South Africa (WASA) domain in great detail: mean wind speed, mean wind power density, elevation and ruggedness index for every 250 metres over an area of 350,000 square kilometres. The wind......-climatological inputs to the wind resource mapping are wind atlas data sets derived from mesoscale modelling using the Karlsruhe Atmospheric Mesoscale Model (KAMM). The topographical inputs to the microscale modelling are 20-m digital height contours from 1:50,000 South African topographical maps and vector-format land...

  15. Large-scale, high-resolution wind resource mapping for wind farm planning and development in South Africa

    DEFF Research Database (Denmark)

    Mortensen, Niels Gylling; Badger, Jake; Hansen, Jens Carsten

    estimates are designed for national and provincial planning and strategic environmental impact assessment for wind power in South Africa and the results have therefore been made available in common GIS formats. The database of results is in the public domain and can be downloaded from the WASA web site......Numerical wind atlas data at 5 km resolution have been used to map the wind resources of the Wind Atlas for South Africa (WASA) domain in great detail: mean wind speed, mean wind power density, elevation and ruggedness index for every 250 metres over an area of 350,000 square kilometres. The wind......-climatological inputs to the wind resource mapping are wind atlas data sets derived from mesoscale modelling using the Karlsruhe Atmospheric Mesoscale Model (KAMM). The topographical inputs to the microscale modelling are 20-m digital height contours from 1:50,000 South African topographical maps and vector-format land...

  16. Quality assurance and demolition: 2008 symposium; Qualitaetssicherung und Rueckbau: Symposium 2008

    Energy Technology Data Exchange (ETDEWEB)

    Schartmann, F.; Thierfeldt, S. [Brenk Systemplanung GmbH, Aachen (Germany)

    2008-04-15

    The 'Quality Assurance and Demolition Symposium, which has become a tradition established jointly by Applus RTD Deutschland GmbH (formerly compra GmbH) and Brenk Systemplanung GmbH, Aachen, was held also in 2008 with the focus on quality assurance and the demolition of nuclear facilities. The conference began with a series of lectures on knowledge and document management in general, and the use of document management systems in the nuclear field in particular. The evening lecture was presented by Axel Weis (Karlsruhe Research Center) on 'Competence Preservation in Nuclear Technology'. The 24 technical papers presented on the next 2 days of the symposium dealt with non-destructive materials testing and with special problems of radiation protection, demolition, and waste management. In 2009, the meeting will cover similar main topics and will again be held in an interesting environment, perhaps in combination with a tour of a demolition project. (orig.)

  17. The EEG grid connection point in the litigation of the Federal Court of Justice; Der EEG-Netzverknuepfungspunkt in der Rechtssprechung des BGH

    Energy Technology Data Exchange (ETDEWEB)

    Brahms, Florian; Richter, Christoph [Maslaton Rechtsanwaltsgesellschaft mbH, Leipzig (Germany)

    2013-03-15

    Along with the question of compensation ability of the electricity from renewable energy sources according to the Renewable Energy Act, now a decision of the Federal Court of Justice (Karlsruhe, Federal Republic of Germany) to the grid connection point in the sense of paragraph 5 paragraph 1 of the EEG 2009. This decision as well as an expected decision of the Federal Court of Justice to the definition of the power plant in the sense of paragraph 3 No. 1 of EEG 2009 have a significant impact on the profitability of a power plant. These decisions require a precise evaluation with regard to their transferability to similar situations. Besides the problem of determining the legal grid connection point in particular litigations at a time delay of the network connection and the requirement of evidences from the network operator to the network connection occur with regard to paragraph 7 paragraph 2 of the EEG 2009.

  18. Grid connection point according to EEG. Does the BHG succeed the clearing house?; Netzverknuepfungspunkt nach dem EEG. Folgt der BGH der Clearingstelle?

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Jochen; Neusuess, Peter [Gassner, Groth, Siederer und Coll., Berlin (Germany). Bereich Anlagenzulassungs- und Energierecht

    2012-02-15

    Since the introduction of the Renewable Energy Law (EEG) in the year 2000, there is a dispute at which point a network operator has to connect an EEG system to his power distribution system. An explicit regulation on the network connection point first was made by the legislator in paragraph 5 EEG 2009. Due to the surprising recommendation of the Clearing House at the end of September 2011, the conflict opened again. At the Federal Court of Justice (Karlsruhe, Federal Republic of Germany), three proceedings are pending on this issue. Until the Federal Court of Justice has decided one of these three proceedings, the plant operator must assess the legal situation on the basis of previous decisions. With this in mind, the authors of the contribution under consideration report on the argumentation of the decisions and on the possibilities to handle the current situation.

  19. Concluding remarks for ECRIS '02

    Energy Technology Data Exchange (ETDEWEB)

    Lyneis, Claude

    2002-09-09

    ECRIS'02 was held in Jyvaeskylae Finland at the edge of Lake Jyvaeskylae, which was beautiful location to meet and discuss the state of Electron Cyclotron Resonance ion sources. It was the 15th ECR Ion Source Workshop in a series stretching back to the first workshop held November 6, 1978 in Karlsruhe Germany. Overall, the workshop reports could be characterized as showing solid achievements and steady progress without any spectacular breakthroughs or highly controversial new ideas. In this short report, I will mention some of the highlights and surprises of the workshop that I observed during the meeting and reported on at the close of the meeting. As such, it will be relatively brief and not meant to be all encompassing. A short list of items that made this workshop memorable is given.

  20. Microbial degradation. Mass transfer in the system pollutant - water - sediment; Mikrobieller Abbau. Massentransfer im System Schadstoff - Wasser - Sediment

    Energy Technology Data Exchange (ETDEWEB)

    Tiehm, Andreas [Technologiezentrum Wasser (TZW), Karlsruhe (Germany). Abt. Umweltbiotechnologie und Altlasten; Kranzioch, Irene; Stoll, Claudia

    2011-09-15

    The microbial degradation of pollutants in the aquatic environment essentially is influenced by the prevailing redox conditions and mass exchange processes (bioavailability). Within a new project, the Technologiezentrum Wasser TZW (Karlsruhe, Federal Republic of Germany) deals with the microbial conversion under dynamic conditions such as those expected in the area of the Three Gorges Dam at the Yangtze River. In particular, molecular-biological methods (PCR, polymerase chain reaction and DGGE Denatured gradient gel electrophoresis) are used for a targeted monitoring and further developed. The focus of the investigation initially focuses on the degradation of halogenated substances which are used as main substances for understanding the mass exchange between sediment and water as well as the microbial conversion processes. An enhanced understanding of the process and the compilation of the dynamic sales performance can be defined as a target.

  1. El método de los elementos finitos para el cálculo de campos electrostáticos

    Directory of Open Access Journals (Sweden)

    Francisco Román Campos

    1982-09-01

    Full Text Available EI Método de los Elementos Finitos se plantea como uno de los sistemas numéricos más apropiados para el cálculo de Campos Electrostáticos por su aplicación al estudio de geometrías cerradas en las que sus condiciones de Frontera son conocidas. En el presente artículo se comenta el empleo del Programa NASTRAN  basado en este método y del Programa TOPONET para la generación de la Red de Elementos Finitos. Los ejemplos que aquí aparecen fueron corridos en el Centro de Cómputo de la Universidad Fridericiana de Karlsruhe. Alemania Federal.

  2. Ludwig Tauscher (1939-2008)

    CERN Multimedia

    2008-01-01

    Dear Colleagues, It is with deep sorrow and regret that we inform you that our colleague and friend Ludwig Tauscher passed away on Sunday 23 November after a heart attack. Ludwig studied physics at the University of Heidelberg, where he obtained his PhD in 1966. After several postdoctoral appointments at the MPI Heidelberg, and the Universities of Konstanz and Karlsruhe, he joined the University of Basel, where he became Professor of Physics in 1985. Ludwig devoted his entire professional life to teaching and experimental physics. He arrived at CERN in the early seventies, where he performed several experiments at the SC and at the PS, studying exotic atoms with various probes such as μ-, π-, K-, and Σ-. In the early eighties he searched for the production of nucleon-antinucleon bound states at the PS, a subject that was the main motivation for the construction of the LEAR storage ring. At LEAR he studied neutral meson productio...

  3. Commissioning of water detritiation and cryogenic distillation systems at TLK in view of ITER design

    Energy Technology Data Exchange (ETDEWEB)

    Cristescu, I. [Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany)], E-mail: ion.cristescu@itp.fzk.de; Cristescu, Ioana R.; Doerr, L.; Glugla, M.; Hellriegel, G.; Michling, R. [Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Murdoch, D. [EFDA Close Support Unit, Boltzmannstrasse 2, D-85748 Garching (Germany); Schaefer, P.; Welte, S.; Wurster, W. [Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany)

    2007-10-15

    The ITER Isotope Separation System (ISS) and Water Detritiation System (WDS) will be integrated in order to reduce potential chronic tritium releases from the ISS by routing the top (protium) product from the ISS into the Liquid Phase Catalytic Exchange (LPCE) column of WDS. This provides an additional barrier against ISS tritium releases and should mitigate the memory effects due to process parameter fluctuations in the ISS. To support the research activities needed to characterize the performances of various components for WDS and ISS processes in various working conditions and configurations as needed for ITER design, an experimental facility called TRENTA and representative of the ITER WDS and ISS protium separation column has been commissioned at Tritium Laboratory Karlsruhe (TLK). The TRENTA facility consists of Combined Electrolysis Catalytic Exchange (CECE) process, with an LPCE column of 8 m, in combination with a cryogenic distillation (CD) process. The processes description and the status of commissioning of TRENTA facility is presented.

  4. Municipal programs of photovoltaic energy development; Les programmes municipaux de developpement du photovoltaique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This study presents some remarkable actions carried out in several European municipalities for the promotion and development of photovoltaic applications: installation of solar cells on public buildings, integration of the photovoltaic energy in the urban plan, application in the transportation sector, programs of public information, of promotion, of incitation, of financing, solar electricity trade, promotion of the 'green current'. After a presentation of the general situation of photovoltaic energy in Europe, and of its development in France, nine case-forms present the experience of nine selected European cities in this domain (Amersfoort (NL), Barcelona (ES), Braedstrup (DK), Karlsruhe (DE), Lausanne (CH), Mataro (ES), Muenchen (ES), Palermo (IT), Zurich (CH)). (J.S.)

  5. Simultaneous removal of mercury, PCDD/F, and fine particles from flue gas.

    Science.gov (United States)

    Korell, Jens; Paur, Hanns-R; Seifert, Helmut; Andersson, Sven

    2009-11-01

    A multifunctional scrubber (MFS) has been developed to reduce the complexity of flue gas cleaning plants. The MFS integrates an oxidizing scrubber equipped with a dioxin-absorbing tower packing material and a space charge electrostatic precipitator. All these processes have been previously developed at Forschungszentrum Karlsruhe. In the described multifunctional scrubber, mercury, sulfur dioxide, hydrogen chloride, polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF), and submicrometer particles are removed simultaneously. A MFS pilot plant with a flue gas volume flow of 250 m(3)/h has been installed in a slipstream of a waste incineration pilot plant. Pilot scale testing was performed to measure mercury, particles, and PCDD/F in the raw and clean gas. After optimization of the process these three flue gas components were separated from the flue gas in the range 87-97%.

  6. NMR methods for the investigation of structure and transport

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, Edme H. [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Mechanische Verfahrenstechnik und Mechanik

    2012-07-01

    Extensive derivations of required fundamental relations for readers with engineering background New applications based on MRI, PGSE-NMR, and low-field NMR New concepts in quantitative data evaluation and image analysis Methods of nuclear magnetic resonance (NMR) are increasingly applied in engineering sciences. The book summarizes research in the field of chemical and process engineering performed at the Karlsruhe Institute of Technology (KIT). Fundamentals of the methods are exposed for readers with an engineering background. Applications cover the fields of mechanical process engineering (filtration, solid-liquid separation, powder mixing, rheometry), chemical process engineering (trickle-bed reactor, ceramic sponges), bioprocess engineering (biofilm growth), and food process engineering (microwave heating, emulsions). Magnetic Resonance Imaging (MRI) as well as low-field NMR are covered with notes on hardware. Emphasis is placed on quantitative data analysis and image processing. (orig.)

  7. Transforming industrial heritage in St. Petersburg Possible futures for the southern industrial belt

    Directory of Open Access Journals (Sweden)

    Barbara Engel

    2016-10-01

    Full Text Available Together with ITMO University of St. Petersburg, the National Superior School of Architecture of Strasbourg (ENSAS and the Faculty of Architecture of the Karlsruhe Institute of Technology (KIT set up a Collaborative Urban Design Studio on the transformation of the southern industrial belt of St. Petersburg. The sustainable redevelopment of postindustrial landscapes into attractive urban districts through new programmatic and spatial possibilities taking into account the sense of place and the unique characteristics of St. Petersburg’s urban geography, the reuse of industrial structures and their adaption to new activities, the designing of spatial structures for lively mixed-use neighbourhoods with housing and work facilities meeting different needs and incomes, are some of the key issues for a common workshop scheduled in November 2015.

  8. FLUTE: A versatile linac-based THz source

    Energy Technology Data Exchange (ETDEWEB)

    Nasse, M. J.; Schuh, M.; Schwarz, M. [Laboratory for Applications of Synchrotron Radiation (LAS), Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe (Germany); Naknaimueang, S.; Mathis, Y.-L.; Rossmanith, R.; Wesolowski, P.; Huttel, E. [ANKA Synchrotron Radiation Facility, Karlsruhe Institute of Technology (KIT), 76344 Eggenstein-Leopoldshafen (Germany); Plech, A. [Institute for Photon Science and Synchrotron Radiation (IPS), Karlsruhe Institute of Technology (KIT), 76344 Eggenstein-Leopoldshafen (Germany); Schmelling, M. [Max Planck Institute for Nuclear Physics (MPIK), 69117 Heidelberg (Germany); Mueller, A.-S. [Laboratory for Applications of Synchrotron Radiation (LAS), Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe (Germany); ANKA Synchrotron Radiation Facility, Karlsruhe Institute of Technology (KIT), 76344 Eggenstein-Leopoldshafen (Germany); Institute for Photon Science and Synchrotron Radiation (IPS), Karlsruhe Institute of Technology (KIT), 76344 Eggenstein-Leopoldshafen (Germany)

    2013-02-15

    A new compact versatile linear accelerator named FLUTE is currently being designed at the Karlsruhe Institute of Technology. This paper presents the status of this 42 MeV machine. It will be used to generate strong (several 100 MV/m) ultra-short ({approx}1 ps) THz pulses (up to {approx}4-25 THz) for photon science experiments, as well as to conduct a variety of accelerator studies. The latter range from comparing different coherent THz radiation generation schemes to compressing electron bunches and studying the electron beam stability. The bunch charge will cover a wide range ({approx}100 pC-3 nC). Later we plan to also produce ultra-short x-ray pulses from the electron bunches, which, for example, could then be combined for THz pump-x-ray probe experiments.

  9. FLUTE: a versatile linac-based THz source.

    Science.gov (United States)

    Nasse, M J; Schuh, M; Naknaimueang, S; Schwarz, M; Plech, A; Mathis, Y-L; Rossmanith, R; Wesolowski, P; Huttel, E; Schmelling, M; Müller, A-S

    2013-02-01

    A new compact versatile linear accelerator named FLUTE is currently being designed at the Karlsruhe Institute of Technology. This paper presents the status of this 42 MeV machine. It will be used to generate strong (several 100 MV/m) ultra-short (~1 ps) THz pulses (up to ~4-25 THz) for photon science experiments, as well as to conduct a variety of accelerator studies. The latter range from comparing different coherent THz radiation generation schemes to compressing electron bunches and studying the electron beam stability. The bunch charge will cover a wide range (~100 pC-3 nC). Later we plan to also produce ultra-short x-ray pulses from the electron bunches, which, for example, could then be combined for THz pump-x-ray probe experiments.

  10. Promoting equal opportunity within the transregional Collabortive Research Center "Waves to Weather" (W2W)

    Science.gov (United States)

    Laurian, Audine; Craig, George

    2017-04-01

    The promotion of equal opportunity (EO) is a central commitment of the transregional Collaborative Research Center "Waves to Weather" (W2W) funded by the DFG. Intense efforts are made to promote EO measures and to support female scientists and parents of young children throughout their career within the consortium. Since the start of W2W in July 2015, the following actions have been undertaken: - an EO committee has been created, which consists of parents of young children and a PhD student from the main partner institutions in Munich, in Mainz and in Karlsruhe. The EO committee has agreed on a list of EO measures to be offered within the consortium and a flyer advertising these measures has been designed, produced and distributed - childcare has been organized during the meetings organized by W2W - outreach events addressed to school girls and promoting the study of physics and mathematics at the university (e.g. Girls' Day) has been organized in Munich, in Mainz and in Karlsruhe - student helpers have been hired to reduce the workload of female principal investigators with young children - efforts are made to invite female keynote speakers to the annual meetings of W2W - regular meetings with the Women's Officer for the Faculty of Physics at the LMU are taking place, e..g to setup a parent-child office. These measures have received very positive feedback from the W2W community and from the partner institutions. Discussions and exchanges of experience with colleagues from other research programs and institutions regarding EO measures would be greatly beneficial to promote EO further.

  11. Optimization of the cold trap design for the KASOLA sodium facility

    Energy Technology Data Exchange (ETDEWEB)

    Onea, Alexandru; Lux, Martin; Hering, Wolfgang [Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen (Germany). Inst. for Neutron Physics and Reactor Technology

    2012-11-01

    The KASOLA (KArlsruhe SOdium LAboratory) experimental facility is currently under construction at Karlsruhe Institute of Technology. The facility serves for research activities on thermal-hydraulics for liquid metal operated systems for transmutation (fast systems, normal operation, transient behaviour, testing of emergency cooling systems), accelerator target development, applications and development of free surface liquid metal targets for accelerators, as well as feasibility studies of liquid metals for solar applications. Supporting heat transfer studies regarding the development of turbulent liquid metal heat transfer models for CFD tools are also foreseen. In sodium operated facilities several impurities can be released during operation, e.g. argon, oxygen, hydrogen, carbon etc., with several adverse effects such as reducing the thermal performance and/or damaging structural materials. The major impurities monitored are sodium oxide Na{sub 2}O and sodium hydride NaH. Hydrogen can diffuse through the steel pipes of the sodium-air heat exchanger or, in a worse case can be generated by a sodium-water reaction, denoting therefore a leak in the tubes of the heat exchanger. Oxygen may origin from the contact with air during maintenance or from the oxide layer of metallic structures initially exposed to sodium during set into operation procedures. The oxygen as an impurity leads to the corrosion of the steel surfaces, therefore values < 2 ppm have to be ensured, while for hydrogen the accepted amount is about 50 ppb (Hemanath et al.). The sodium purification is performed in a cold trap that allows the agglomeration of sodium oxide and sodium hydride on the large surface of a wire mesh. (orig.)

  12. A nuclear simulation experiment for the International Fusion Materials Irradiation Facility (IFMIF)

    Energy Technology Data Exchange (ETDEWEB)

    Moellendorff, U. von; Giese, H.; Feuerstein, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Reaktorsicherheit]|[Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Hochleistungsimpuls- und Mikrowellentechnik]|[Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Hauptabteilung Ingenieurtechnik; Maekawa, F. [Japan Atomic Energy Research Inst. (Japan)

    2002-07-01

    For studying neutronic and nuclear characteristics of the projected International Fusion Materials Irradiation Facility (IFMIF), a saturation thick target of natural lithium was irradiated with 40 MeV deuterons from the Karlsruhe Isochronous Cyclotron. The resulting neutron spectrum and yield were measured by multi-foil activation. The production rates of the radionuclides tritium and beryllium-7 in the lithium were also measured. They are (6.85 g {+-} 7%) tritium and (1.85 g {+-} 12%) Be-7 per IFMIF full power year at 40 MeV and 250 mA; these values supersede preliminary results given earlier. Further, samples of two different steels, pure vanadium, and a vanadium alloy were activated in the neutron field, and specific activities of many radionuclides in becquerel per kg of material subsequently determined by gamma spectrometry. The report gives all experimental results together with sufficient experimental details to enable calculations for testing nuclear data. (orig.) [German] Zur Untersuchung von neutronischen und nuklearen Charakteristika der projektierten international fusion materials irradiation facility (IFMIF) wurde ein saettigungsdickes natuerliches Lithiumtarget mit 40-MeV-Deuteronen aus dem Karlsruher Isochronzyklotron bestrahlt. Spektrum und Ausbeute der entsiehenden Neutronen wurden mittels Multifolien-Aktivierung gemessen. Auch die Erzeugungsraten der Radionuklide Tritium und Beryllium-7 im Lithium wurden gemessen. Sie betragen (6.85 g {+-} 12%) Tritium and (1.85 g {+-} 12%) Be-7 pro IFMIF-Volleistungsjahr bei 40 MeV and 250 mA; diese Werte ersetzen frueher angegebene vorlaeufige Ergebnisse. Ausserdem wurden Proben von zwei verschiedenen Staehlen, reinem Vanadium und einer Vanadiumlegierung in dem Neutronenfeld aktiviert und anschliessend durch Gammaspektrometrie spezifische Aktivitaeten vieler Radionuklide in Becquerel pro kg Material bestimmt. Der Bericht enthaelt alle Messergebnisse zusammen mit genuegend experimentellen Einzelheiten, um

  13. Analysis of a thermite experiment to study low pressure corium dispersion

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, D.

    2001-08-01

    The report describes the recalculation of a thermite experiment in a reduced scale which simulates the discharge of molten core materials out of the pressure vessel of a light water reactor into the open compartments and the dome of the containment. The experiment was performed in the framework of a multinational effort at the Sandia National Laboratory, U.S.A. It is being followed by the DISCO program at the Forschungszentrum Karlsruhe. A computational fluid dynamics code was supplemented with specific models to recalculate the Sandia experiment in order to identify problem areas which need to be addressed in the future. Therefore, a first attempt was undertaken to extrapolate to reactor conditions. This was done in two steps to separate geometric from material scaling relationships. The study shows that important experimental results can be extrapolated according to general scaling laws but that there are sensitivities, especially when replacing thermite by corium. The results show a considerable scatter and a dependence on geometric resolution and dynamics of energy transfer between participating components. (orig.) [German] Der Bericht beschreibt die Berechnung eines in reduziertem Massstab durchgefuehrten Thermitexperimentes, das den Auswurf von geschmolzenem Kernmaterial aus dem Druckbehaelter eines Leichtwasserreaktors in die angrenzenden Raeume und den Dom des Sicherheitsbehaelters beschreibt. Das Experiment wurde im Rahmen einer internationalen Uebereinkunft im Sandia National Laboratory, U.S.A., durchgefuehrt. Die Thematik wird zur Zeit im DISCO Programm im Forschungszentrum Karlsruhe weiter verfolgt. Ein Fluiddynamikcode wurde mit speziellen Modellen ergaenzt, um das Sandia Experiment nachzurechnen. Dabei wurden Problembereiche identifiziert, die zukuenftig bearbeitet werden muessen. Ein erster Versuch der Extrapolation auf den Reaktorfall wurde unternommen. Die Extrapolation wurde in zwei Schritten durchgefuehrt, um die geometrische von der

  14. Design, construction and performance of the current lead test facility CuLTKa

    Science.gov (United States)

    Richter, T.; Bobien, S.; Fietz, W. H.; Heiduk, M.; Heller, R.; Hollik, M.; Lange, C.; Lietzow, R.; Rohr, P.

    2017-09-01

    The Karlsruhe Institute of Technology (KIT) has a longtime experience in the development of High Temperature Superconductor (HTS) Current Leads (CLs) for high currents leading to several contracts with national and international partners. Within these contracts series production and cold acceptance tests of such CLs were required. The cold test of a large number of CLs requires the availability of a flexible facility which allows fast and reproducible testing. With the Current Lead Test Facility Karlsruhe (CuLTKa) a versatile and flexible test bed for CLs was designed and constructed. The facility consists of five cryostats including two test boxes and is directly connected by a transfer line to a refrigerator with a capacity of 2 kW at 4.4 K. The refrigerator supplies supercritical helium at two different temperature levels simultaneously. Each of the two test cryostats can be equipped with a pair of CLs which is short-circuited at the low temperature level via a superconducting bus bar. For current tests a power supply can provide DC currents up to 30 kA. If required, the facility design offers the potential of withstanding high voltages of up to 50 kV on the test objects. The commissioning of the facility started in July 2014. In total a series of acceptance tests of the CLs for the Japanese JT-60SA will be carried out until second half of 2017 to qualify six CLs with a current of 26 kA and 20 CLs with a current of 20 kA. In the meantime, six CLs@26 kA and 16 CLs@20 kA have been tested in CuLTKa which demonstrates the very effective operation of the facility. This paper describes the setup of the facility from cryogenic, electrical and process control point of view and will highlight the design of particular technical aspects. Furthermore, an overview of the performance during the commissioning phase will be given.

  15. Robotic assisted minimally invasive surgery

    Science.gov (United States)

    Palep, Jaydeep H

    2009-01-01

    The term “robot” was coined by the Czech playright Karel Capek in 1921 in his play Rossom's Universal Robots. The word “robot” is from the check word robota which means forced labor. The era of robots in surgery commenced in 1994 when the first AESOP (voice controlled camera holder) prototype robot was used clinically in 1993 and then marketed as the first surgical robot ever in 1994 by the US FDA. Since then many robot prototypes like the Endoassist (Armstrong Healthcare Ltd., High Wycombe, Buck, UK), FIPS endoarm (Karlsruhe Research Center, Karlsruhe, Germany) have been developed to add to the functions of the robot and try and increase its utility. Integrated Surgical Systems (now Intuitive Surgery, Inc.) redesigned the SRI Green Telepresence Surgery system and created the daVinci Surgical System® classified as a master-slave surgical system. It uses true 3-D visualization and EndoWrist®. It was approved by FDA in July 2000 for general laparoscopic surgery, in November 2002 for mitral valve repair surgery. The da Vinci robot is currently being used in various fields such as urology, general surgery, gynecology, cardio-thoracic, pediatric and ENT surgery. It provides several advantages to conventional laparoscopy such as 3D vision, motion scaling, intuitive movements, visual immersion and tremor filtration. The advent of robotics has increased the use of minimally invasive surgery among laparoscopically naïve surgeons and expanded the repertoire of experienced surgeons to include more advanced and complex reconstructions. PMID:19547687

  16. Charging infrastructures for electric vehicles. Development and evaluation of a development strategy on the basis of driving performance; Ladeinfrastrukturen fuer Elektrofahrzeuge. Entwicklung und Bewertung einer Ausbaustrategie auf Basis des Fahrverhaltens

    Energy Technology Data Exchange (ETDEWEB)

    Kley, Fabian

    2011-07-01

    Recently, electric vehicles have once again been attracting increased attention against the backdrop of rising oil prices and the necessity to reduce CO2-emissions. However, it is as yet still unclear which charging infrastructure will be required for these vehicles. Charging infrastructure has not been a major topic in the literature and electric mobility studies up to now. The focus here tends to be on technical design, different standardization efforts, or the demands for a dense infrastructure. The users' perspective is reflected to some extent in surveys conducted in the scope of acceptance studies of electric mobility. However, so far, no analysis has been made of which charging infrastructure will be required based on driving behavior. This thesis therefore describes the technical alternatives for charging an electric vehicle and assesses the charging infrastructure based on an economic assessment considering real driving behavior. An optimal charging profile is determined for each pattern of driving behavior using dynamic programming and entered into a total cost assessment. The optimization incorporates different vehicle concepts, charging infrastructures, as well as battery aging. A minimum cost vehicle concept and the optimal battery size can be determined for each charging profile helping to derive a suitable charging infrastructure. In contrast to the widely held belief that a public charging infrastructure is indispensable, this thesis was able to show that charging should take place in the private domain at low charging power levels. Besides fully electric vehicles, plug-in hybrids are well suited for early market adoption and mean that people can benefit earlier from the advantages of electric mobility with a high all-electric driving share and a guaranteed driving range because of the additional combustion engine. This thesis is based on my research conducted at the Fraunhofer Institute for Systems and Innovation Research (ISI) in Karlsruhe

  17. Simulation of the interaction between the atmosphere, vegetation and the Earth's surface in different parameterisation concepts; Simulation der Wechselwirkung zwischen Atmosphaere, Vegetation und Erdoberflaeche bei Verwendung unterschiedlicher Parametrisierungsansaetze

    Energy Technology Data Exchange (ETDEWEB)

    Grabe, F.

    2002-01-01

    The purpose of the present study was to compare two soil vegetation models based on entirely different concepts, namely the ''VEG3D'' model of the Institute of Meteorology and Climate Research of Karlsruhe University and the TERRA model of the German weather service. VEG3D comprises a multilayer soil model which calculates prognostic equations for soil heat and water flows and a vegetation layer in which the vegetation is represented by a single large leaf, in accordance with Deardorff's reference leaf concept (1976). TERRA is a two-layer soil model which calculates soil temperatures by means of the ''Extended Force Restore Method''. TERRA takes account of the vegetation by allowing the properties of the soil surface to change like a vegetation-bearing surface does. [German] Es war das Ziel dieser Arbeit, zwei Bodenvegetationsmodelle mit voellig unterschiedlichen Konzeptionen miteinander zu vergleichen. Bei diesen Modellen handelt es sich um das 'VEG3D' des Instituts fuer Meteorologie und Klimaforschung der Universitaet Karlsruhe und um das 'TERRA' des Deutschen Wetterdienstes. Das VEG3D beinhaltet ein mehrschichtiges Bodenmodell, in dem die prognostischen Gleichungen fuer Bodenwaerme- und Bodenwasserstroeme berechnet werden, sowie eine Bestandsschicht, in der die Vegetation nach dem Referenzblatt-Konzept von Deardorff (1976) durch ein einzelnes, grosses Blatt dargestellt wird. Das TERRA ist ein zweischichtiges Bodenmodell, welches die Bodentemperaturen ueber die 'Extended-Force-Restore Methode' berechnet. Vegetation wird in TERRA beruecksichtigt, in dem die Eigenschaften der Bodenoberflaeche so veraendert werden, dass sie sich verhaelt wie eine bewachsene Oberflaeche. (orig.)

  18. Host-enhanced chemical indexing in technical databases.

    Science.gov (United States)

    Badger, E W; Siems, C D

    1989-11-01

    Many files that index engineering, physics, or other technical literature contain references to chemical compounds. Complex chemical formulas in the title or abstract often contain special characters, for example, (,), [,], +, -, degrees, and %. Upper and lower case letters often are also included. A search of these formulas and symbols in the basic index is next to impossible because the terms in this field are usually parsed to all alphanumeric characters without sensitivity to case. It is possible for an online host to use a character-recognition algorithm to scan the title and abstract data for special characters or character strings and place them in a separate index field when such files are loaded. Such an algorithm has been designed by Fachinformationszentrun Energie, Physik, Mathematik GmbH in Karlsruhe, West Germany (FIZ Karlsruhe), the European service center of STN International, the scientific and technical information network. This algorithm recognizes and analyzes chemical formulas, material descriptions, alloys, and eutectic systems as well as nuclear reactions and dopings that appear in the title, abstract, or other fields. These character strings are converted into a standardized form and placed in a new field (the element terms field) which is supplied by the online host during the loading process. A checklist of allowed terms (symbols and chemical formulas) is used to prevent irrelevant terms from being mistaken for legitimate chemical symbols. For instance, the algorithm can recognize that CPU (central processing unit) is not a legitimate chemical formula. It is easy to demonstrate the utility this additional index supplies.(ABSTRACT TRUNCATED AT 250 WORDS)

  19. Source term derivation and radiological safety analysis for the TRICO II research reactor in Kinshasa

    Energy Technology Data Exchange (ETDEWEB)

    Muswema, J.L., E-mail: jeremie.muswem@unikin.ac.cd [Faculty of Science, University of Kinshasa, P.O. Box 190, KIN XI (Congo, The Democratic Republic of the); Ekoko, G.B. [Faculty of Science, University of Kinshasa, P.O. Box 190, KIN XI (Congo, The Democratic Republic of the); Lukanda, V.M. [Faculty of Science, University of Kinshasa, P.O. Box 190, KIN XI (Congo, The Democratic Republic of the); Democratic Republic of the Congo' s General Atomic Energy Commission, P.O. Box AE1 (Congo, The Democratic Republic of the); Lobo, J.K.-K. [Faculty of Science, University of Kinshasa, P.O. Box 190, KIN XI (Congo, The Democratic Republic of the); Darko, E.O. [Radiation Protection Institute, Ghana Atomic Energy Commission, P.O. Box LG 80, Legon, Accra (Ghana); Boafo, E.K. [University of Ontario Institute of Technology, 2000 Simcoe St. North, Oshawa, ONL1 H7K4 (Canada)

    2015-01-15

    Highlights: • Atmospheric dispersion modeling for two credible accidents of the TRIGA Mark II research reactor in Kinshasa (TRICO II) was performed. • Radiological safety analysis after the postulated initiating events (PIE) was also carried out. • The Karlsruhe KORIGEN and the HotSpot Health Physics codes were used to achieve the objectives of this study. • All the values of effective dose obtained following the accident scenarios were below the regulatory limits for reactor staff members and the public, respectively. - Abstract: The source term from the 1 MW TRIGA Mark II research reactor core of the Democratic Republic of the Congo was derived in this study. An atmospheric dispersion modeling followed by radiation dose calculation were performed based on two possible postulated accident scenarios. This derivation was made from an inventory of peak radioisotope activities released in the core by using the Karlsruhe version of isotope generation code KORIGEN. The atmospheric dispersion modeling was performed with HotSpot code, and its application yielded to radiation dose profile around the site using meteorological parameters specific to the area under study. The two accident scenarios were picked from possible accident analyses for TRIGA and TRIGA-fueled reactors, involving the case of destruction of the fuel element with highest activity release and a plane crash on the reactor building as the worst case scenario. Deterministic effects of these scenarios are used to update the Safety Analysis Report (SAR) of the reactor, and for its current version, these scenarios are not yet incorporated. Site-specific meteorological conditions were collected from two meteorological stations: one installed within the Atomic Energy Commission and another at the National Meteorological Agency (METTELSAT), which is not far from the site. Results show that in both accident scenarios, radiation doses remain within the limits, far below the recommended maximum effective

  20. Using forum-based competitions to improve sustainability and motivation in higher education GNSS learning - Chances and risks

    Science.gov (United States)

    Mayer, M.

    2012-04-01

    The learning strategies of students seem often to be economically adapted to framework requirements in order to achieve best possible examination performances, especially. For this reason, teachers often detect surface level learning characteristics (e.g., accepting facts uncritically, isolated fact storage, fact memorisation) within the learning concepts of students. Therefore, knowledge sustainability is often suffering. This is detectable when trying to build on knowledge of earlier lectures or lecture courses. In order to improve the sustainability of geodetic knowledge, case studies were carried out at the Geodetic Institute of the Karlsruhe Institute of Technology (Karlsruhe, Germany) within the lecture course "Introduction into GNSS positioning". The lecture course "Introduction into GNSS positioning" is a compulsory part of the Bachelor study course "Geodesy and Geoinformatics" and also a supplementary module of the Bachelor study course "Geophysics". The lecture course is aiming for transferring basic knowledge and basic principles of Global Navigation Satellite Systems (e.g., GPS). During the winter semesters 2010/11 and 2011/12 ten resp. 15 students visited this compulsory attendance lecture course. In addition to classroom lectures and practical training (e.g., field exercises), a forum-based competition was included and tested using the forum feature of the learning management system ILIAS. According to the Bologna Declaration, a special focus of the innovative competition concept is on competence-related learning. The developed eLearning-related competition concept supports and motivates the students to learn more sustainable. In addition, the students have to be creative and have to deal with GNSS factual knowledge in order to win the competition. Within the presentation, the didactical concept of the enriched blended learning lecture course and the competition-based case study are discussed. The rules of the competition are presented in detail

  1. Techniques and methods to guarantee Bologna-conform higher education in GNSS

    Science.gov (United States)

    Mayer, M.

    2012-04-01

    The Bologna Declaration is aiming for student-centered, outcome-related, and competence-based teaching. In order to fulfill these demands, deep level learning techniques should be used to meet the needs of adult-compatible and self-determined learning. The presentation will summarize selected case studies carried out in the framework of the lecture course "Introduction into GNSS positioning" of the Geodetic Institute of the Karlsruhe Institute of Technology (Karlsruhe, Germany). The lecture course "Introduction into GNSS positioning" is a compulsory part of the Bachelor study course "Geodesy and Geoinformatics" and also a supplementary module of the Bachelor study course "Geophysics". Within the lecture course, basic knowledge and basic principles of Global Navigation Satellite Systems, like GPS, are imparted. The lecture course was migrated starting from a classically designed geodetic lecture course, which consisted of a well-adapted combination of teacher-centered classroom lectures and practical training (e.g., field exercises). The recent Bologna-conform blended learning concepts supports and motivates students to learn more sustainable using online and classroom learning methods. Therefore, an appropriate combination of - classroom lectures: Students and teacher give lectures - practical training: Students select topics individually - online learning: ILIAS (learning management system) is used as data, result, and communication platform. The framing didactical method is based on the so-called anchored instruction approach. Within this approach, an up-to-date scientific GNSS-related paper dealing with the large-scale geodetic project "Fehmarn Belt Fixed Link" is used as anchor. The students have to read the paper individually in the beginning of the semester. This enables them to realize a lot of not-known GNSS-related facts. Therefore, questions can be formulated. The lecture course deals with these questions, in order to answer them. At the end of the

  2. Experimental and numerical investigation of liquid-metal free-surface flows in spallation targets

    Energy Technology Data Exchange (ETDEWEB)

    Batta, A., E-mail: batta@kit.edu [Karlsruhe Institute of Technology, Germany Hermann-von-Helmholtz-PLATZ 1, 76344 Eggenstein-Leopoldshafen (Germany); Class, A.G.; Litfin, K.; Wetzel, Th. [Karlsruhe Institute of Technology, Germany Hermann-von-Helmholtz-PLATZ 1, 76344 Eggenstein-Leopoldshafen (Germany); Moreau, V.; Massidda, L. [CRS4 Centre for Advanced Studies, Research and Development in Sardinia, Polaris, Edificio 1, 09010 Pula, CA (Italy); Thomas, S.; Lakehal, D. [ASCOMP GmbH Zurich, Zurich (Switzerland); Angeli, D.; Losi, G. [DIEF – Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, via Vignolese 905, 41125 Modena (Italy); Mooney, K.G. [University of Massachusetts Amherst, Department of Mechanical and Industrial Engineering, Amherst (United States); Van Tichelen, K. [SCK-CEN, Belgian Nuclear Research Centre, Boeretang 200, 2400 Mol (Belgium)

    2015-08-15

    Highlights: • Experimental study of free surface for lead bismuth eutectic target. • Numerical investigation of free surface of a liquid metal target. • Advanced free surface modelling. - Abstract: Accelerator Driven Systems (ADS) are extensively investigated for the transmutation of high-level nuclear waste within many worldwide research programs. The first advanced design of an ADS system is currently developed in SCK• CEN, Mol, Belgium: the Multi-purpose hYbrid Research Reactor for High-tech Applications (MYRRHA). Many European research programs support the design of MYRRHA. In the framework of the Euratom project ‘Thermal Hydraulics of Innovative nuclear Systems (THINS)’ a liquid-metal free-surface experiment is performed at the Karlsruhe Liquid Metal Laboratory (KALLA) of Karlsruhe Institute of Technology (KIT). The experiment investigates a full-scale model of the concentric free-surface spallation target of MYRRHA using Lead Bismuth Eutectic (LBE) as coolant. In parallel, numerical free surface models are developed and tested which are reviewed in the article. A volume-of-fluid method, a moving mesh model, a free surface model combining the Level-Set method with Large-Eddy Simulation model and a smoothed-particle hydrodynamics approach are investigated. Verification of the tested models is based on the experimental results obtained within the THINS project and on previous water experiments performed at the University Catholic de Louvain (UCL) within the Euratom project ‘EUROpean Research Programme for the TRANSmutation of High Level Nuclear Waste in Accelerator Driven System (EUROTRANS)’. The design of the target enables a high fluid velocity and a stable surface at the beam entry. The purpose of this paper is to present an overview of both experimental and numerical results obtained for free surface target characterization. Without entering in technical details, the status, the major achievements and lessons for the future with respect to

  3. ZOXY - a new battery for electric vehicles?; ZOXY - eine neue Batterie fuer Elektrofahrzeuge?

    Energy Technology Data Exchange (ETDEWEB)

    Heyder, B. [EnBW Badenwerk AG, Karlsruhe (Germany)

    1999-07-01

    Until the present the exclusive power source for driving electric vehicles is the rechargeable electro-chemical battery, where in the same device charge and discharge process occur with the same chemical substances. Compared to other energy carriers it only has a small energy content and further major disadvantages. Compared to the more than 100-years-old lead batteries this principle has achieved rather small progress in the last decades. If charge and discharge process are separated from each other an electrochemical process with high specific energy density can be chosen for energy use. The recharge process can be taken out of the vehicle and carried out at a stationary location without any limitations in terms of weight and machines. The combination of both processes should be realised with manageable substances in an almost continuous circuit. Examples for this process are the galvanic elements, which were used at the beginnings in the field of electrical engineering in the last century. In Karlsruhe a cell has been developed that works with zinc and oxygen. It exceeds an energy density of more than 150 kWh per kg battery weight and is currently tested in several electric vehicles. (orig.) [German] Als Stromquelle fuer den Antrieb von Elektroautos wird bis heute fast ausnahmslos die wiederaufladbare elektrochemische Batterie verwendet, bei der in dem selben Geraet mit der gleichen Chemie sowohl Lade- und Entladevorgang ablaufen. Sie hat verglichen mit anderen Energietraegern nur einen geringen Energieinhalt und weitere gravierende Nachteile. In den vergangenen Jahrzehnten wurden mit diesem Prinzip verglichen mit den ueber 100 Jahre alten Bleibatterie eher bescheidene Fortschritte erzielt. Trennt man Lade- und Entladevorgang voneinander, kann man sich fuer die Enegieentnahme einen elektrochemischen Prozess mit hohem spezifischen Energieinhalt aussuchen. Ferner kann der Ladevorgang aus dem Fahrzeug herausgenommen werden und ortsfest ohne Einschraenkungen

  4. Sensitivity of seasonal weather prediction and extreme precipitation events to soil moisture initialization uncertainty using SMOS soil moisture products

    Science.gov (United States)

    Khodayar-Pardo, Samiro; Lopez-Baeza, Ernesto; Coll Pajaron, M. Amparo

    Sensitivity of seasonal weather prediction and extreme precipitation events to soil moisture initialization uncertainty using SMOS soil moisture products (1) S. Khodayar, (2) A. Coll, (2) E. Lopez-Baeza (1) Institute for Meteorology and Climate Research, Karlsruhe Institute of Technology (KIT), Karlsruhe Germany (2) University of Valencia. Earth Physics and Thermodynamics Department. Climatology from Satellites Group Soil moisture is an important variable in agriculture, hydrology, meteorology and related disciplines. Despite its importance, it is complicated to obtain an appropriate representation of this variable, mainly because of its high temporal and spatial variability. SVAT (Soil-Vegetation-Atmosphere-Transfer) models can be used to simulate the temporal behaviour and spatial distribution of soil moisture in a given area and/or state of the art products such as the soil moisture measurements from the SMOS (Soil Moisture and Ocean Salinity) space mission may be also convenient. The potential role of soil moisture initialization and associated uncertainty in numerical weather prediction is illustrated in this study through sensitivity numerical experiments using the SVAT SURFEX model and the non-hydrostatic COSMO model. The aim of this investigation is twofold, (a) to demonstrate the sensitivity of model simulations of convective precipitation to soil moisture initial uncertainty, as well as the impact on the representation of extreme precipitation events, and (b) to assess the usefulness of SMOS soil moisture products to improve the simulation of water cycle components and heavy precipitation events. Simulated soil moisture and precipitation fields are compared with observations and with level-1(~1km), level-2(~15 km) and level-3(~35 km) soil moisture maps generated from SMOS over the Iberian Peninsula, the SMOS validation area (50 km x 50 km, eastern Spain) and selected stations, where in situ measurements are available covering different vegetation cover

  5. Volatility of secondary organic aerosol during OH radical induced ageing

    Directory of Open Access Journals (Sweden)

    K. Salo

    2011-11-01

    Full Text Available The aim of this study was to investigate oxidation of SOA formed from ozonolysis of α-pinene and limonene by hydroxyl radicals. This paper focuses on changes of particle volatility, using a Volatility Tandem DMA (VTDMA set-up, in order to explain and elucidate the mechanism behind atmospheric ageing of the organic aerosol. The experiments were conducted at the AIDA chamber facility of Karlsruhe Institute of Technology (KIT in Karlsruhe and at the SAPHIR chamber of Forchungzentrum Jülich (FZJ in Jülich. A fresh SOA was produced from ozonolysis of α-pinene or limonene and then aged by enhanced OH exposure. As an OH radical source in the AIDA-chamber the ozonolysis of tetramethylethylene (TME was used while in the SAPHIR-chamber the OH was produced by natural light photochemistry. A general feature is that SOA produced from ozonolysis of α-pinene and limonene initially was rather volatile and becomes less volatile with time in the ozonolysis part of the experiment. Inducing OH chemistry or adding a new portion of precursors made the SOA more volatile due to addition of new semi-volatile material to the aged aerosol. The effect of OH chemistry was less pronounced in high concentration and low temperature experiments when lower relative amounts of semi-volatile material were available in the gas phase. Conclusions drawn from the changes in volatility were confirmed by comparison with the measured and modelled chemical composition of the aerosol phase. Three quantified products from the α-pinene oxidation; pinonic acid, pinic acid and methylbutanetricarboxylic acid (MBTCA were used to probe the processes influencing aerosol volatility. A major conclusion from the work is that the OH induced ageing can be attributed to gas phase oxidation of products produced in the primary SOA formation process and that there was no indication on significant bulk or surface reactions. The presented results, thus, strongly emphasise

  6. PREFACE Preface

    Science.gov (United States)

    Ronning, Filip; Batista, Cristian

    2011-01-01

    Preface The 2010 International Conference on Strongly Correlated Electron Systems was held in Santa Fe, New Mexico, a reunion of sorts of the 1989 International Conference on the Physics of Highly Correlated Electron Systems that also convened in Santa Fe. SCES 2010 - co-chaired by John Sarrao and Joe Thompson - followed the tradition of earlier conferences in this century, hosted by Buzios ('08), Houston ('07), Vienna ('05), Karlsruhe ('04), Krakow ('02) and Ann Arbor ('01). Every three years since 1997, SCES has joined the International Conference on Magnetism (ICM), held in Recife ('00), Rome ('03), Kyoto ('06) and Karlsruhe ('09). Like its predecessors, SCES 2010 topics included strongly correlated f- and d-electron systems, heavy-fermion behaviors, quantum-phase transitions, non-Fermi liquid phenomena, unconventional superconductivity, and emergent states that arise from electronic correlations. Recent developments from studies of quantum magnetism and cold atoms complemented the traditional subjects and were included in SCES 2010. 2010 celebrated the 400th anniversary of Santa Fe as well as the birth of astronomy. So what is the connection to SCES? The Dutch invention of the first practical telescope and its use by Galileo in 1610 and subsequent years overturned the dogma that the sun revolved about the earth. This revolutionary, and at the time heretical, conclusion required innovative combinations of new instrumentation, observation and mathematics. These same combinations are just as important 400 years later and are the foundation of scientific discoveries that were discussed during SCES 2010. As we learned, past dogmas about strongly correlated materials and phenomena must be re-examined with an open and inquisitive mind. A glimpse at the excitement this conference had to offer can be seen in the SCES 2010 proceedings, which are published simultaneously by the Institute of Physics Publishing in issues of the Journal of Physics: Conference Series

  7. Heat transfer and pressure drop when flow boiling of CO{sub 2}-oil-mixtures; Waermeuebergang und Druckverlust beim Stroemungssieden von CO{sub 2}-Oel-Gemischen

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, Markus; Dietrich, Benjamin; Wetzel, Thomas [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Thermische Verfahrenstechnik

    2012-07-01

    The contribution under consideration describes experimental results for the heat transfer and pressure drop when flow boiling of CO{sub 2} and CO{sub 2}-oil mixtures. A comparison of these data with current correlations from the literature shall present the accuracy of the evaluation of the technical evaporator critically, and demonstrate the need for further research. Due to the required oil lubrication, for technical compression chillers, the refrigerant oil is also a part of the circulatory fluid. Thereby, the material properties of the fluid (density, viscosity, surface tension, thermal conductivity, specific heat capacity) can be significantly affected. These characteristics affect both, the form of the flow (for example, foaming, enhanced wall wetting), and the heat transfer as well as the pressure drop. The change of the material properties particularly is affected by the oil content. When flow boiling, an oil concentration of 1 wt.% already may result in a significantly different behavior in comparison to the pure refrigerant. In this case, the oil content may amount up to 8 wt.% in industrial refrigeration systems. The experiments on heat transfer and pressure drop were carried out on a pilot plant at the Institute of Thermal Process Engineering of the Karlsruhe Institute of Technology (Karlsruhe, Federal Republic of Germany). The fluid (CO{sub 2} or CO{sub 2}-oil mixture) circulates in a horizontal cycle consisting of four pre-evaporators in order to adjust the vapor content, the measurement path with a subsequent protective heat section for the determination of heat transfer and pressure loss under isothermal wall boundary condition, a sight glass to determine the flow pattern and a brine-cooled condenser for back-condensation of CO{sub 2} and adjustment of temperature and pressure. The discontinuous feeding of oil is carried out on an oil circuit, and the oil content is determined gravimetrically by sampling. The measurement section consists of a nickel

  8. Künstlerisch geleitete Medienbildung mit Portfolios: Potenziale für Jugendliche in berufsvorbereitenden Bildungsmaßnahmen

    Directory of Open Access Journals (Sweden)

    Daniela Reimann

    2014-06-01

    Full Text Available Die pädagogische Zielgruppe des BMBF-Forschungsprojekts "MediaArt@Edu" (Leitung: Dr. Daniela Reimann, Wiss. Mitarbeiterin: Simone Bekk sind TeilnehmerInnen außerschulischer berufsvorbereitender Bildungsmaßnahmen, die im Rahmen von künstlerischen Workshops Medienprojekte am ZKM realisieren, die Gestaltungsprozesse mittels Projektportfolio visualisieren und – betreut von studentischen Mentoren – reflektieren. Die Jugendlichen sollen gestalterisch und spielerisch an Medientechnologien herangeführt werden, um eigene berufsübergreifende Potenziale entdecken zu können. Das KIT kooperiert dabei mit dem Zentrum für Kunst und Medientechnologie und der Arbeitsagentur Karlsruhe. Es werden Workshops zu unterschiedlichen thematischen Medienmodulen durchgeführt und evaluiert, wie z. B. Roboter_Gestalten, Licht_Gestalten, GamesLab, Sound und Smart Textile (Wearables. Ziel des Vorhabens ist es, ein neues Konzept digitaler Medienbildung mit Lernprozessbegleitung durch Studierende zu entwickeln, welches künstlerische Vermittlungsformen, interaktive Medien und Kunst einbezieht und das den Voraussetzungen, Bedürfnissen und Entwicklungsperspektiven von Jugendlichen in der Berufsvorbereitung und -orientierung besser als bislang entspricht und zur ihrer individuellen Berufsbiografiegestaltung beiträgt. Im vorliegenden Artikel wird der mediendidaktische Ansatz und das kunstpädagogische Konzept des Projekts anhand des Beispielmoduls "Licht-Objekte gestalten" vorgestellt und anhand von Beispielen aus der Projektarbeit veranschaulicht. The target group of the research project "MediaArt@Edu" (Acronym are paticipants of vocational preparation measures, who develop media projects in the context of artistic workshops at ZKM. They visualize the design processes using a project portfolio, reflected with student mentors.The young people experience media technologies through design, play in order to realize their own potentials and key skills, necessary across

  9. O que é iconoclash? Ou, há um mundo além das guerras de imagem?

    Directory of Open Access Journals (Sweden)

    Bruno Latour

    2008-06-01

    Full Text Available O autor oferece uma reflexão a partir das obras apresentadas na exposição Iconoclash. Beyond the Image Wars in Science, Religion and Art, em 2002, no Center for New Art and Media, em Karlsruhe, cuja curadoria juntou três ambientes, os da religião, da ciência e da arte contemporânea, em que as imagens vêm se apresentando como "armas culturais" por meio de uma luta ambígua que tanto produz como destrói imagens, ícones e emblemas. Iconoclash foi o termo escolhido para definir a temática dessa exposição e nortear a reflexão do autor sobre o ódio e o fanatismo, nos diversos âmbitos da vida cultural social e política. Movendo-se em direção a um tipo alternativo de "iconofilia", para além das guerras de imagens, sugere a suspensão do gesto iconoclasta optando-se por uma cascata de imagens em transformação, ao invés de se ater obsessivamente a imagens fixas e congeladas fora de seu fluxo.The author offers a reflection based on the works presented at the exhibit Iconoclash. Beyond the Image Wars in Science, Religion and Art, at the Center for New Art and Media, in Karlsruhe in 2002, where the curators put together three fields - religion, science and contemporary art, in which images have been presented as "cultural weapons" through an ambiguous struggle that both produces and destroys images, icons and emblems. Iconoclash was the term chosen to define the theme of this exhibition and guide the author's reflection on hatred and fanaticism, in the diverse ambits of the cultural, social and political life. Moving towards an alternative type of "iconophilia", beyond the image wars, the author suggests the suspension of the iconoclast gesture, opting for a cascade of images in transformation, instead of focusing obsessively on images fixed and frozen out of their flow.

  10. Joint convention on the safety of spent fuel management and on the safety of radioactive waste management. Report of the Federal Republic of Germany for the fourth review meeting in may 2012; Gemeinsames Uebereinkommen ueber die Sicherheit der Behandlung abgebrannter Brennelemente und ueber die Sicherheit der Behandlung radioaktiver Abfaelle. Bericht der Bundesrepublik Deutschland fuer die vierte Ueberpruefungskonferenz im Mai 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-08-15

    There are currently nine power reactors in operation in Germany. These are exclusively light-water reactors (seven pressurised water reactors and two boiling water reactors whose fuel assemblies are composed of low-enriched uranium oxide or uranium/plutonium mixed oxide (MOX)). With the 13{sup th} amendment to the Atomic Energy Act of 6 August 2011 as a consequence of the events in Japan, which led to a reassessment of the risks associated with the use of nuclear energy, the licences to operate the Biblis A and B, Neckarwestheim 1, Brunsbuettel, Isar 1, Unterweser, Philippsburg 1 and Kruemmel plants expired. For the remaining nine nuclear power plants, the operating licences will expire between 2015 and the end of 2022. Another 12 power reactors have already been or are in the process of being decommissioned. There were furthermore seven prototype and demonstration nuclear power plants operated in Germany, which have all been decommissioned. Two of these, the HDR Grosswelzheim, which was fully removed in 1998, and the VAK Kahl, which was also removed completely in 2010, were boiling water reactors using low-enriched uranium oxide pellets (in the VAK partly also MOX) as fuel. Two other reactors, the AVR at Juelich and the THTR at Hamm-Uentrop, were helium-cooled graphite-moderate high-temperature reactors in which the medium- and high-enriched fuel consisting of uranium/thorium oxide particles was enclosed in graphite spheres. The MZFR at Karlsruhe was a heavy-water reactor using very-low-enriched (0.85 %) uranium oxide fuel. The Compact Sodium-Cooled Nuclear Reactor (Kompakter Natriumgekuehlter Kernreaktor - KNK II) at Karlsruhe used high-enriched uranium oxide and uranium/plutonium mixed-oxide fuel. The Niederaichbach NPP (KKN) was in operation between 1972 and 1974 as a prototype plant with a heavy-water-moderated and CO{sub 2}-gas-cooled pressure tube reactor using natural uranium as fuel. Its complete removal was finished in 1995; the reactor was released from

  11. A Reassessment of Complementary Access Tools for Chemical Indicators

    Energy Technology Data Exchange (ETDEWEB)

    Siskind, Barry [Brookhaven National Lab. (BNL), Upton, NY (United States). Nonproliferation and National Security Dept.; Stern, Warren [Brookhaven National Lab. (BNL), Upton, NY (United States). Nonproliferation and National Security Dept.; Henzl, Vladimir [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-04-01

    The Complementary Access Working Group (CAWG) was set up as a multi-laboratory team with members from Brookhaven National Laboratory (BNL), Idaho National Laboratory (INL), Los Alamos National Laboratory (LANL), and Sandia National Laboratories (SNL) under the direction and funding provided by National Nuclear Security Administration (NNSA) through NA-241, Next Generation Safeguards Initiative (NGSI). During FY 13 the CAWG evaluated proliferation indicators based largely on a review of the 1996 version of the IAEA’s Physical Model (Phase 1). During FYs 13 and 14, the CAWG then selected technologies and specific portable and hand-held devices that could be used by the IAEA to identify the chemical compositions of materials found during complementary access (Phase 2). [Note that in this report “chemical” is used in a broad sense to include elements, metals, and alloys as well as chemical compounds.] In November 2014, the CAWG issued its Phase 3 report describing laboratory and field testing of three devices, each device representing a specific technology that the CAWG had selected as a result of the Phase 1 and Phase 2 activities. LANL and BNL continued measurements and analysis during FY15, leading to a reinterpretation of some of the Phase 3 results. This report serves a twofold purpose. The first section of the report compares and contrasts the Phase 3 testing with presently available preliminary results of the Karlsruhe workshop. The results of Phase 3 (and the reinterpretation of some of these results) as well as the preliminary results of the Karlsruhe workshop provide the rationale for the second section of this report. In Section 2 of this report, we revisit the combinations of signatures and technologies considered in Phases 2 and 3 of the CAWG effort. We do this to determine whether the three technologies and the matching instruments selected for the Phase 3 testing are more limited than initially thought. Based on this initial re-evaluation of the

  12. Thermal-hydraulics of lead bismuth for accelerator driven systems

    Energy Technology Data Exchange (ETDEWEB)

    Thomas Schulenberg; Xu Cheng; Robert Stieglitz [Institute for Nuclear and Energy Technologies, Forschungszentrum Karlsruhe, P.O. Box 3640, 76021 Karlsruhe (Germany)

    2005-07-01

    Full text of publication follows: Lead bismuth has been selected as one of the most suitable coolants to be used in accelerator driven systems (ADS) for transmutation of minor actinides. It serves both, as a target material of the spallation source to balance the neutron economy, and as a coolant with high thermal inertia to provide a safe and reliable heat transfer to the secondary power cycle. With the aim to develop the required technologies to enable the later design of such ADS systems, the Karlsruhe Lead bismuth LAboratory KALLA, consisting of three test loops, has been built and set into operation at the Forschungszentrum Karlsruhe since 2000, keeping more than 45 t of PbBi in operation at temperatures up to 550 deg. C. The test program includes oxygen control systems, heat flux simulation tools, electro-magnetic and mechanical pump technologies, heat transfer and flow measurements, reliability and corrosion tests. In a first test campaign, a technology loop called THESYS was built to develop measurement technologies for the acquisition of scalar quantities, like pressures, temperatures, concentrations, and flow rates, as well as velocity fields, which are required for both operational and scientific purposes. THESYS also allowed to perform generic turbulent heat transfer experiments necessary to provide liquid metal adapted turbulent heat transfer models for ADS design analyses. The second loop, the thermalhydraulic loop THEADES with an installed power of 2.5 MW, has been built to conduct prototypical component experiments for beam windows (e.g. MEGAPIE or MYHRRA) or fuel rod configurations. First test results will be reported. The experimental team is supported by a numerical team who studied the thermal hydraulics of the tested components in order to enable a later transfer of the results to industrial systems. Three different types of codes are being improved: lumped parameter codes (e.g. ATHLET) to perform system analyses for lead bismuth in loops

  13. Simulation of the BWR experiments CORA-17 and CORA-28 using ATHLET-CD and assessment of BWR modelling. 1{sup st} Technical report. Validation and interpretation of the ATHLET-CD model basis; Simulation der SWR-Versuche CORA-17 und CORA-28 mit dem Programmsystem ATHLET-CD und Bewertung der SWR-Modellbasis. 1. Technischer Fachbericht. Validierung und Interpretation der ATHLET-CD Modellbasis

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, M.; Gremme, F.; Koch, M.K.

    2013-08-15

    The 1st Technical Report was prepared for the research project ''Validation and Interpretation of the ATHLET-CD Model Basis'' funded by the Federal Ministry of Economics and Technology (BMWi1501385) and carried out at the Chair of Energy Systems and Energy Economics at Ruhr-Universitaet Bochum (RUB). This report provides results of the simulation of the Boiling Water Reactor (BWR) experiments CORA-17 and -28 with ATHLET-CD Mod. 2.2A. The system code ATHLET-CD (Analysis of Thermal-hydraulics of Leaks and Transients - Core Degradation) is developed by the German Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH. Code results are compared to measurements in order to assess and to analyze the capabilities of the current code version with regard to the modeling of BWR components. The CORA test series was carried out between the years 1987 and 1993 at the former Kernforschungszentrum Karlsruhe (KfK), now Karlsruhe Institute of Technology (KIT). The investigations provided experimental data regarding the material behavior during the early phase of core degradation in Light Water Reactors (LWR). The tests CORA17 and -28 represented a typical BWR arrangement of the fuel rod bundle and provided insights about the bundle behavior during the quenching process (CORA-17) and regarding the influence of a preoxidized bundle (CORA-28), respectively. The simulation results are analyzed and discussed in terms of the thermal bundle behavior, the zirconium oxidation in steam and the resulting hydrogen generation as well as the material relocation. In particular, the recently extended modeling capabilities of the code in terms of the relocation of BWR components like the absorber blade and the canister wall are assessed. The analysis shows that the code captures the thermal behavior in good agreement in both experiments. An even enhanced reproduction of the test CORA-28 is obtained in comparison to a calculation using the previous code version ATHLET-CD Mod

  14. Simulation of hydrogen deflagration experiment – Benchmark exercise with lumped-parameter codes

    Energy Technology Data Exchange (ETDEWEB)

    Kljenak, Ivo, E-mail: ivo.kljenak@ijs.si [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Kuznetsov, Mikhail, E-mail: mike.kuznetsov@kit.edu [Karlsruhe Institute of Technology, Kaiserstraße 12, 76131 Karlsruhe (Germany); Kostka, Pal, E-mail: kostka@nubiki.hu [NUBIKI Nuclear Safety Research Institute, Konkoly-Thege Miklós út 29-33, 1121 Budapest (Hungary); Kubišova, Lubica, E-mail: lubica.kubisova@ujd.gov.sk [Nuclear Regulatory Authority of the Slovak Republic, Bajkalská 27, 82007 Bratislava (Slovakia); Maltsev, Mikhail, E-mail: maltsev_MB@aep.ru [JSC Atomenergoproekt, 1, st. Podolskykh Kursantov, Moscow (Russian Federation); Manzini, Giovanni, E-mail: giovanni.manzini@rse-web.it [Ricerca sul Sistema Energetico, Via Rubattino 54, 20134 Milano (Italy); Povilaitis, Mantas, E-mail: mantas.p@mail.lei.lt [Lithuania Energy Institute, Breslaujos g.3, 44403 Kaunas (Lithuania)

    2015-03-15

    Highlights: • Blind and open simulations of hydrogen combustion experiment in large-scale containment-like facility with different lumped-parameter codes. • Simulation of axial as well as radial flame propagation. • Confirmation of adequacy of lumped-parameter codes for safety analyses of actual nuclear power plants. - Abstract: An experiment on hydrogen deflagration (Upward Flame Propagation Experiment – UFPE) was proposed by the Jozef Stefan Institute (Slovenia) and performed in the HYKA A2 facility at the Karlsruhe Institute of Technology (Germany). The experimental results were used to organize a benchmark exercise for lumped-parameter codes. Six organizations (JSI, AEP, LEI, NUBIKI, RSE and UJD SR) participated in the benchmark exercise, using altogether four different computer codes: ANGAR, ASTEC, COCOSYS and ECART. Both blind and open simulations were performed. In general, all the codes provided satisfactory results of the pressure increase, whereas the results of the temperature show a wider dispersal. Concerning the flame axial and radial velocities, the results may be considered satisfactory, given the inherent simplification of the lumped-parameter description compared to the local instantaneous description.

  15. Coupled exposure to ingredients of cosmetic products: II. Preservatives.

    Science.gov (United States)

    Uter, Wolfgang; Yazar, Kerem; Kratz, Eva-Maria; Mildau, Gerd; Lidén, Carola

    2014-04-01

    The use of cosmetics exposes consumers to mixtures of ingredients, many of which are potential allergens. Many cosmetics contain one or several preservatives, some being important contact allergens. To examine the pattern of co-exposure to preservatives in different categories of cosmetics. A survey of products marketed in Germany, conducted in 2006-2009 by the Chemical and Veterinary Investigation Office in Karlsruhe, identified 4680 products categorizable according to Annex I to the Cosmetics Directive with information on the presence of preservatives. The occurrence and co-occurrence of preservatives were analysed and presented in tabular and graphical format. Thirty per cent of all products were not declared to contain any preservatives; for 8%, no INCI labelling was present. For the remainder, the number of preservatives used tended to be higher in leave-on than in rinse-off products. Most often, combinations of (up to all five) parabens were used (39% of all products). Combinations with phenoxyethanol were also frequent. Formaldehyde releasers were found in 8% of products overall. The pattern of co-exposure to preservatives in important categories of cosmetic products illustrates the 'cocktail' of allergens that may facilitate sensitization, although, conversely, the combination of preservatives allows individual use levels to be kept lower, thereby possibly reducing sensitization risk. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. Analysis of Emission Effects Related to Drivers’ Compliance Rates for Cooperative Vehicle-Infrastructure System at Signalized Intersections

    Directory of Open Access Journals (Sweden)

    Ruohua Liao

    2018-01-01

    Full Text Available Unknown remaining time of signal phase at a signalized intersection generally results in extra accelerations and decelerations that increase variations of operating conditions and thus emissions. A cooperative vehicle-infrastructure system can reduce unnecessary speed changes by establishing communications between vehicles and the signal infrastructure. However, the environmental benefits largely depend on drivers’ compliance behaviors. To quantify the effects of drivers’ compliance rates on emissions, this study applied VISSIM 5.20 (Planung Transport Verkehr AG, Karlsruhe, Germany to develop a simulation model for a signalized intersection, in which light duty vehicles were equipped with a cooperative vehicle-infrastructure system. A vehicle-specific power (VSP-based model was used to estimate emissions. Based on simulation data, the effects of different compliance rates on VSP distributions, emission factors, and total emissions were analyzed. The results show the higher compliance rate decreases the proportion of VSP bin = 0, which means that the frequencies of braking and idling were lower and light duty vehicles ran more smoothly at the intersection if more light duty vehicles complied with the cooperative vehicle-infrastructure system, and emission factors for light duty vehicles decreased significantly as the compliance rate increased. The case study shows higher total emission reductions were observed with higher compliance rate for all of CO2, NOx, HC, and CO emissions. CO2 was reduced most significantly, decreased by 16% and 22% with compliance rates of 0.3 and 0.7, respectively.

  17. Progress in the realization of the PRIMA neutral beam test facility

    Science.gov (United States)

    Toigo, V.; Boilson, D.; Bonicelli, T.; Piovan, R.; Hanada, M.; Chakraborty, A.; Agarici, G.; Antoni, V.; Baruah, U.; Bigi, M.; Chitarin, G.; Dal Bello, S.; Decamps, H.; Graceffa, J.; Kashiwagi, M.; Hemsworth, R.; Luchetta, A.; Marcuzzi, D.; Masiello, A.; Paolucci, F.; Pasqualotto, R.; Patel, H.; Pomaro, N.; Rotti, C.; Serianni, G.; Simon, M.; Singh, M.; Singh, N. P.; Svensson, L.; Tobari, H.; Watanabe, K.; Zaccaria, P.; Agostinetti, P.; Agostini, M.; Andreani, R.; Aprile, D.; Bandyopadhyay, M.; Barbisan, M.; Battistella, M.; Bettini, P.; Blatchford, P.; Boldrin, M.; Bonomo, F.; Bragulat, E.; Brombin, M.; Cavenago, M.; Chuilon, B.; Coniglio, A.; Croci, G.; Dalla Palma, M.; D'Arienzo, M.; Dave, R.; De Esch, H. P. L.; De Lorenzi, A.; De Muri, M.; Delogu, R.; Dhola, H.; Fantz, U.; Fellin, F.; Fellin, L.; Ferro, A.; Fiorentin, A.; Fonnesu, N.; Franzen, P.; Fröschle, M.; Gaio, E.; Gambetta, G.; Gomez, G.; Gnesotto, F.; Gorini, G.; Grando, L.; Gupta, V.; Gutierrez, D.; Hanke, S.; Hardie, C.; Heinemann, B.; Kojima, A.; Kraus, W.; Maeshima, T.; Maistrello, A.; Manduchi, G.; Marconato, N.; Mico, G.; Moreno, J. F.; Moresco, M.; Muraro, A.; Muvvala, V.; Nocentini, R.; Ocello, E.; Ochoa, S.; Parmar, D.; Patel, A.; Pavei, M.; Peruzzo, S.; Pilan, N.; Pilard, V.; Recchia, M.; Riedl, R.; Rizzolo, A.; Roopesh, G.; Rostagni, G.; Sandri, S.; Sartori, E.; Sonato, P.; Sottocornola, A.; Spagnolo, S.; Spolaore, M.; Taliercio, C.; Tardocchi, M.; Thakkar, A.; Umeda, N.; Valente, M.; Veltri, P.; Yadav, A.; Yamanaka, H.; Zamengo, A.; Zaniol, B.; Zanotto, L.; Zaupa, M.

    2015-08-01

    The ITER project requires additional heating by two neutral beam injectors, each accelerating to 1 MV a 40 A beam of negative deuterium ions, to deliver to the plasma a power of about 17 MW for one hour. As these requirements have never been experimentally met, it was recognized as necessary to setup a test facility, PRIMA (Padova Research on ITER Megavolt Accelerator), in Italy, including a full-size negative ion source, SPIDER, and a prototype of the whole ITER injector, MITICA, aiming to develop the heating injectors to be installed in ITER. This realization is made with the main contribution of the European Union, through the Joint Undertaking for ITER (F4E), the ITER Organization and Consorzio RFX which hosts the Test Facility. The Japanese and the Indian ITER Domestic Agencies (JADA and INDA) participate in the PRIMA enterprise; European laboratories, such as IPP-Garching, KIT-Karlsruhe, CCFE-Culham, CEA-Cadarache and others are also cooperating. Presently, the assembly of SPIDER is on-going and the MITICA design is being completed. The paper gives a general overview of the test facility and of the status of development of the MITICA and SPIDER main components at this important stage of the overall development; then it focuses on the latest and most critical issues, regarding both physics and technology, describing the identified solutions.

  18. Applications of shape memory alloys in medical instruments.

    Science.gov (United States)

    Fischer; Vogel; Welle

    2004-08-01

    Endosmart GmbH was founded in January 2002 and is a spin-off from the Forschungszentrum Karlsruhe. Endosmart focuses on the use of NiTi mostly outside the implant market. Therefore a lot of tools especially for instruments for minimally invasive surgery are being developed. Innovative hingeless graspers, baskets, flexible instruments and also parts of instruments, just to name a few of them. A new focus of our work is the excellent compatibility to magnetic resonance imaging (MRI) systems, and this has led to the development of the first MRI compatible needles for use in a surgical robot. New in the field of NiTi is the porous foam and its compatibility to human cells and first results show new possibilities in growing artificial cells. In combination with the elasticity of the foam a new generation of e.g. medical bone implants could be possible. This paper describes several developments in the field of instruments of shape memory alloys (SMAs) made also at Endosmart.

  19. On Hamlet's Crypt: Effi Briest, Asta Nielsen, Aand Britney Spears

    Directory of Open Access Journals (Sweden)

    Viola Kolarov

    2011-10-01

    Full Text Available This contribution looks at the way instinct is transmitted and represented as ghost appearance. The essay elaborates two basic theses: first, that instinct is not defined by creaturely heritage, since it is not a testable structure in itself, nor subject to mourning and developmental processes; and second, that works of fine literature and pop oeuvres alike may serve as carriers of a ghost transmission charged with instinctive heritage. The study represents a model for reading ghostly genealogies that complement the familiar and familial reproductive ones as it draws on traditions such as the adultery novel, continental philosophy, psychoanalysis, and Disney. Currently based in Berlin, Viola Kolarov has taught in the German Departments of the Johns Hopkins University and New York University. She has published on Shakespeare, contemporary art, film, and pop culture. Her forthcoming book, “Shakespeare and the Autobiography of the Machine Age,” rethinks Goethe, the German translation/transmission of Shakespeare, and the German literary tradition in the contexts of media technology. Originally from Berlin, Susanne Lanckowsky entered the Academy of Fine Arts Karlsruhe, class of Franz Ackermann, in 2007. Since 2009 she has shown solo and in group on numerous occasions and studied abroad with prestigious scholarship support for one semester at the Faculdade de Belas Artes Universidade do Porto, Portugal, and for another semester at the Escuela Nacional de Pintura, Escultura y Grabado La Esmeralda in Mexico.

  20. News from the Library: Nucleonica - web-driven nuclear science

    CERN Multimedia

    CERN Library

    2012-01-01

    Most of us are familiar with the Karlsruhe Nuclide Chart. It spreads from wall to wall and tells you all about decay chains of all known nuclides and isotopes.   The good news is that this resource is freely available here, the homepage of a suite of resources for nuclear science: a mass activity calculator, a decay engine, dosimetry and shielding calculations, range and stopping power calculations, gamma spectrum generator and analyzer, a virtual cloud chamber and a packaging calculator to name a few. All these programmes have been tested and approved by leading world experts. You can register to access these programmes here. A basic license is free, so anybody who is serious about Nuclear Science should register as soon as possible! A Premium account gives even more options in the calculations and utilities. If you think a premium account to Nucleonica would be useful for your work and for CERN in general, please contact CERN Library. Access the resource here. Literature in Focus: ...

  1. Analysis of Undergraduate Students’ Mobility at Selected Higher Education Institutions

    Directory of Open Access Journals (Sweden)

    Riko Novak

    2013-01-01

    Full Text Available The article explores the mobility of undergraduate students at threeselected higher education institutions in three different countries. Students,who participated in the analysis, have been involved in mobilityprogrammes over the last six years (between 2006 and 2011 at thefollowing higher education institutions: Germany – Duale HochschuleBaden Württemberg Karlsruhe, Norway – University of Tromsø andSlovenia – Faculty of Management. The empirical research was conductedon a population of 3,539 undergraduate students, who completedpart of their academic curriculum in the host country during theperiod under investigation. The purpose of this article was to examinethe motivational factors influencing the decision for an internationalmobility destination and the expectations of students on a sample of288 (mobile undergraduates. The research has shown that the majorityof students of the selected educational institutions chose mobilitybecause of the international experience, that gender has an impact onthe duration of a student mobility stay and that in the majority of casesthe students are satisfied with the mobility program.

  2. Mineralogical investigations of the role of the clay fraction in geothermal energy use; Mineralogische Untersuchungen zur Rolle der Tonfraktion bei der Gewinnung geothermischer Energie

    Energy Technology Data Exchange (ETDEWEB)

    Althaus, E.; Frosch, G. [Karlsruhe Univ. (T.H.) (Germany). Mineralogisches Inst.

    1997-12-01

    Authigenic clay minerals strongly influence the quality of geothermal reservoir systems. Their precipitation may drastically change the properties of reservoir sandstones. They interact more strongly with non-equilibrium fluids than most other mineral phases. The most abundant clay minerals in geothermal wells of Northeastern Germany are kaolinite, illite and mixed-layer minerals. Experiments are being carried out to study the dissolution rates of these minerals in NaCl brines at different pH-values. (orig.) [Deutsch] Im Rahmen des BMBF-Projektes `Evaluierung geowissenschaftlicher und wirtschaftlicher Bedingungen fuer die Nutzung hydrogeothermaler Ressourcen` werden am Mineralogischen Institut der Universitaet Karlsruhe (T.H.) Experimente zur Stabilitaet von Tonmineralen in geothermischen Systemen durchgefuehrt. Die Untersuchungen beziehen sich auf Gesteine und Solen, wie sie durch die nordostdeutschen Geothermiebohrungen Neustadt-Glewe, Rheinsberg und Neubrandenburg aufgeschlossen sind. Die Untersuchten Gesteinsproben enstammen der oberen Trias und dem Jura. Die vergleichbaren stratigraphischen Einheiten sind in den Bohrungen in unterschiedlicher Teufe und Maechtigkeit anzutreffen: So finden sich die Contorta-Schichten (Raetkeuper) bei Neustadt-Glewe in ca. 2200 m, bei Rheinsberg in ca. 1680 m und bei Neubrandenburg in ca. 1250 m Tiefe. (orig.)

  3. The Status of Beryllium Research for Fusion in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Glen R. Longhurst

    2003-12-01

    Use of beryllium in fusion reactors has been considered for neutron multiplication in breeding blankets and as an oxygen getter for plasma-facing surfaces. Previous beryllium research for fusion in the United States included issues of interest to fission (swelling and changes in mechanical and thermal properties) as well as interactions with plasmas and hydrogen isotopes and methods of fabrication. When the United States formally withdrew its participation in the International Thermonuclear Experimental Reactor (ITER) program, much of this effort was terminated. The focus in the U.S. has been mainly on toxic effects of beryllium and on industrial hygiene and health-related issues. Work continued at the INEEL and elsewhere on beryllium-containing molten salts. This activity is part of the JUPITER II Agreement. Plasma spray of ITER first wall samples at Los Alamos National Laboratory has been performed under the European Fusion Development Agreement. Effects of irradiation on beryllium structure are being studied at Oak Ridge National Laboratory. Numerical and phenomenological models are being developed and applied to better understand important processes and to assist with design. Presently, studies are underway at the University of California Los Angeles to investigate thermo-mechanical characteristics of beryllium pebble beds, similar to research being carried out at Forschungszentrum Karlsruhe and elsewhere. Additional work, not funded by the fusion program, has dealt with issues of disposal, and recycling.

  4. Contemporary tectonic stress: Advances in research and industry

    Science.gov (United States)

    Müller, Birgit; Sperner, Blanka

    The need for knowledge about the in situ tectonic stress field in research and economic applications was the topic of a series of two World Stress Map (WSM) Euroconferences. WSM is a global database containing information on contemporary tectonic stress in the Earth's crust, which is derived from six types of stress indicators: earthquake focal mechanisms, well bore breakouts, hydraulic fracturing, overcoring measurements, and young (Quaternary) geological indicators such as faultslip data and volcanic alignments.The database as well as stress maps from different regions of the world are available via the Internet (http://www-wsm.physik.uni-karlsruhe.de/). The first WSM Euroconference addressed the commercial application of in situ stress measurements. Improved knowledge of tectonic stress and effective rock strength is important in the design and construction of underground openings. For oil companies in charge of exploration and production, in situ stresses are basic input data for the calculation of actual production rates, petrophysical properties, borehole stability, compaction, subsidence, seismicity, solid control, sand production, geomechanical parameters, hydrocarbon migration, and hydraulic fracturing.The loss of drilling mud or hydrocarbons due to incomplete sealing of the drill holes or unexpected fracturing caused by tectonic stress leads to severe environmental problems and economic losses. In civil engineering and mining, the stability aspect is of equal economic importance, but in addition, the stability of road tunnels and mines is essential to save human life.

  5. [Dance projects as an integral part of CI rehabilitation and their impact on mental health: a pilot study].

    Science.gov (United States)

    Klink, B; Praetorius, M; Roder, S; Hintermair, M

    2014-07-01

    Alongside improvements in hearing and communication skills, the rehabilitation of children, adolescents and adults with a cochlear implant (CI) in recent years has increasingly taken into account mental health and quality of life issues. In the context of the programs offered, this study assesses the significance of dance for the mental health of adult clients with a CI. Eleven adult CI users participated in a dance project, which took place as a cooperation between the ENT University Hospital Heidelberg and the Baden State Theatre Karlsruhe. Participants were questioned at two different time points for assessment with the mental health scales (SPG). These scales measure seven different aspects of psychosocial well-being (including autonomy, willpower, affirmation of life and meaningfulness). Significant positive changes in the domains of affirmation of life, self-reflection and social integration were revealed by before and after comparisons; tendencies toward positive change were observed (p ≤ 0.10) in the domains of willpower, naturalness and meaningfulness. No changes were observed in the autonomy domain. The results indicate that the mental health of adult clients with a CI can be strengthened by dance as a complementary rehabilitation module. Concepts of CI rehabilitation should increasingly find anchor in the consideration of such arrangements for its range of offers.

  6. The bioliq {sup registered} bioslurry gasification process for the production of biosynfuels, organic chemicals, and energy

    Energy Technology Data Exchange (ETDEWEB)

    Dahmen, Nicolaus; Henrich, Edmund; Dinjus, Eckhard; Weirich, Friedhelm [Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (Germany). Inst. of Catalysis Research and Technology

    2012-12-15

    Biofuels may play a significant role in regard to carbon emission reduction in the transportation sector. Therefore, a thermochemical process for biomass conversion into synthetic chemicals and fuels is being developed at the Karlsruhe Institute of Technology (KIT) by producing process energy to achieve a desirable high carbon dioxide reduction potential. In the bioliq process, lignocellulosic biomass is first liquefied by fast pyrolysis in distributed regional plants to produce an energy-dense intermediate suitable for economic transport over long distances. Slurries of pyrolysis condensates and char, also referred to as biosyncrude, are transported to a large central gasification and synthesis plant. The bioslurry is preheated and pumped into a pressurized entrained flow gasifier, atomized with technical oxygen, and converted at > 1,200 C to an almost tar-free, low-methane syngas. Syngas - a mixture of CO and H2 - is a well-known versatile intermediate for the selectively catalyzed production of various base chemicals or synthetic fuels. At KIT, a pilot plant has been constructed together with industrial partners to demonstrate the process chain in representative scale. The process data obtained will allow for process scale-up and reliable cost estimates. In addition, practical experience is gained. The paper describes the background, principal technical concepts, and actual development status of the bioliq process. It is considered to have the potential for worldwide application in large scale since any kind of dry biomass can be used as feedstock. Thus, a significant contribution to a sustainable future energy supply could be achieved.

  7. Parametric studies by means of uncertainty and sensitivity methods for coupled thermal-hydraulic/neutron-physics application

    Energy Technology Data Exchange (ETDEWEB)

    Jaeger, W.; Sanchez, V.; Cheng, X. [Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (Germany). Inst. for Neutron Physics and Reactor Technology; Monti, L. [Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (Germany). Inst. for Nuclear and Energy Technologies; Hurtado, A. [Technical Univ. of Dresden (Germany). Inst. of Power Engineering

    2011-07-01

    At the Institute for Neutron Physics and Reactor Technology (INR) at the Karlsruhe Institute of Technology (KIT), the development and validation of coupled codes systems is one major activity. In this paper, a 2-step method is proposed to perform uncertainty and sensitivity analysis of a nuclear fuel bundle. At first, the SUSA package (Software system for Uncertainty and Sensitivity Analysis), 2 is applied to the thermal hydraulic results of the TRACE (TRACE/RELAP Advanced Computational Engine) code to identify crucial thermal hydraulic parameter combinations which are successively used in the TH/NP coupled system TRACEERANOS to account for the neutronic feedbacks. This 2-step method was applied since the TRACE-ERANOS system runs 1 input in approximately 1 day (depending on the computer configurations). Since the uncertainty and sensitivity analysis requires about 100 runs of the thermal hydraulic input (with altered parameters, running within minutes) an integral TRACE-SUSA-ERANOS analysis would need around 100 days. For this analysis a fuel assembly model of the HPLWR (High Performance Light Water Reactor) was selected. Due to the general structure of the coupling and code communication scripts, the system can be used for any kind of reactor/system which can be described with TRACE and ERANOS (e.g., fast systems) while SUSA can be applied to anything. (orig.)

  8. Description of the ENDF-NJOY system for the generation of cross sections libraries; Descripcion del sistema ENDF-NJOY para la generacion de bibliotecas de secciones eficaces

    Energy Technology Data Exchange (ETDEWEB)

    Alonso V, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1991-01-15

    The physics of nuclear reactors requires of a great number of data to be able to evaluate the different phenomena that happen in a nuclear reactor; these data are mainly the microscopic neutron cross sections, but it is also required of data of radioactive decay and of nuclear structure for a great number of materials as well as of the cross sections of the photons and the production of these for the neutron interaction. These data group in nuclear databases, being the main ones: ENDF Nuclear Evaluated File, ENDL Dates Nuclear Evaluated Library it Dates (of the Laboratory Lawrence Livermore). JENDL Japanese Nuclear Evaluated Library Dates. Soviet SOKRATOR Nuclear Evaluated KEDAF Nuclear Karlsruhe File Dates. JEF Join Evaluated File (coordinated by NEA Data Bank). The existent codes that execute neutron and photon calculations require libraries of data that are very different some of other and of the databases. Of here that it is required of a series of processing codes that use the database like enter and its generate a secondary library of cross sections, which is read as enter for a code of spectra generation. Generally average cross sections by group are obtained; this library is that it is used in the codes that execute neutron calculations. (Author)

  9. Experimental investigation of ice nucleation in water droplets and sulphate particles in the temperature range between -30 C and -65 C; Experimente zur Eisnukleation von Wassertroepfchen und Sulfatpartikeln bei Temperaturen zwischen -65 C und -30 C

    Energy Technology Data Exchange (ETDEWEB)

    Benz, S.

    2007-10-15

    High altitude cirrus clouds influence the climate by scattering and absorption of radiation. The cloud and aerosol chamber AIDA of Forschungszentrum Karlsruhe allows generation and observation of ice clouds in laboratory at realistic conditions. Experiments were carried out to investigate the ice formation in clouds of supercooled liquid water droplets and in sulphate aerosols. The homogeneous ice nucleation rate, given as the product of the number of critical ice germs to initiate the freezing and the rate at which additional molecules are incorporated into a critical germ, was measured at typical cloud conditions in the temperature range between -36 C and -37 C for supercooled water droplets with diameters smaller than 10 {mu}m. The comparison of the results shows good agreement both with recent data from literature gained from considerably larger droplets and with classical ice nucleation theory. Thereby, the hypothesis that a critical germ is formed preferentially near the surface of a supercooled droplet could not be confirmed. The ice formation from ammonium sulphate aerosol was examined in the temperature range from -50 C to -65 C. It was shown that ammonium sulphate solution particles, which were produced by neutralization of sulphuric acid solution particles by gaseous ammonia, freeze homogeneously at conditions comparable to sulphuric acid solution particles. If ammonium sulphate particles crystallize they start to form ice at comparatively low supersaturation values (10-20%) by direct deposition of water vapour onto the solid particles. Ammonia, which is highly anthropogenically affected, may influence the properties of upper tropospheric ice clouds. (orig.)

  10. CITYBEM: AN OPEN SOURCE IMPLEMENTATION AND VALIDATION OF MONTHLY HEATING AND COOLING ENERGY NEEDS FOR 3D BUILDINGS IN CITIES

    Directory of Open Access Journals (Sweden)

    S. M. Murshed

    2017-10-01

    Full Text Available Cities play an important role in reaching local and global targets on energy efficiency and the reduction of greenhouse gas emissions. In order to determine the potential of energy efficiency in the building sector new planning instruments are required that allow depicting the complete building stock on the one hand and investigate detailed measures on the other hand. To pursue this objective, the ISO 13970:2008 monthly heating and cooling energy model is implemented using an open source based software architecture (CityBEM, in connection with data from 3D city models in the CityGML standard (LOD2. Input parameters such as the building geometry, typology and energy characteristics have been associated with the 3D data. The model has been applied to several urban districts with different numbers of buildings in the city of Karlsruhe. In order to test the accuracy of the implemented model and its robustness, a 3-step validation has been conducted. The comparison of simulation results with results based on a TRNSYS simulation showed acceptable results for the studied application cases. The proposed approach can help urban decision makers to perform a city or district wide analysis of the building energy need which can be further used to prepare future scenarios or renovation plans to support decision making.

  11. Energy and greenhouse balance of photocatalytic CO2 conversion to methanol

    Directory of Open Access Journals (Sweden)

    Muench W.

    2012-10-01

    Full Text Available Within the Leading-Edge Cluster “Forum Organic Electronic”, the research project “Solar2Fuel” funded by the German Ministry of education and research (BMBF (2009 – 2012, EnBW, BASF, Karlsruhe Institute of Technology and Ruprecht-Karls-University of Heidelberg aim to develop a future solar powered CO2 to methanol conversion technology. CO2 from stationary sources such as power plants shall be catalytically converted together with water to a product such as methanol by use of solar irradiation. For this purpose a catalyst shall be developed. EnBW investigates the required boundary conditions to make such a principle interesting with respect to energy and greenhouse gas balance as well as economic evaluations. The assessment of boundary conditions includes the analysis of the whole chain from power generation, CO2 capture and transport, a virtual photocatalytic reactor, the product purification and use in the traffic sector. Most important technical factors of the process such as CO2 conversion efficiency is presented. CO2 capturing and liquefaction are the most energy intensive process steps, CO2 transport in pipeline is highly energy efficient and depending on energy need of the photoconversion step and the product purification, the overall greenhouse gas balance is comparable with the underground storage of the captured CO2.

  12. Monitoring of the energy scale in the KATRIN neutrino experiment

    CERN Document Server

    AUTHOR|(CDS)2083282

    The question of the absolute mass scale of neutrinos is of particular interest for particle physics, astrophysics, and cosmology. The KATRIN experiment (KArlsruhe TRItium Neutrino experiment) aims to address the effective electron antineutrino mass from the shape of the tritium $\\beta$-spectrum with an unprecedented sensitivity of 0.2 eV/c$^2$. One of the major systematic effects concerns the experimental energy scale, which has to be stable at the level of only a few parts in a million. For its calibration and monitoring the monoenergetic electrons emitted in the internal conversion of $\\gamma$-transition of the metastable isotope $^{83\\mathrm{m}}$Kr will be extensively applied. The aim of this thesis is to address the problem of KATRIN energy scale distortions and its monitoring in detail. The source of electrons based on $^{83\\mathrm{m}}$Kr embedded in a solid as well as the source based on gaseous $^{83\\mathrm{m}}$Kr are studied. Based on the experimental results an approach for the continuous stability m...

  13. EDIM - Earthquake Disaster Information System for the Marmara Region, Turkey

    Science.gov (United States)

    Wenzel, Friedemann; Erdik, Mustafa; Zschau, Jochen; Fischer, Joachim; Christ, Ingrid; Kiehle, Christian

    2010-05-01

    The main objectives of EDIM (www.cedim.de/EDIM.php) are to enhance the Istanbul earthquake early warning (EEW) system with a number of scientific and technological developments that - in the end - provide a tool set for EEW with wide applicability. Innovations focus on three areas. (1) Analysis and options for improvement of the current system; (2) development of a new type of self-organising sensor system and its application to early warning; (3) development of a geoinformation infrastructure and geoinformation system tuned to early warning purposes. Development in the frame of the Istanbul system, set up and operated by KOERI, allows testing our novel methods and techniques in an operational system environment and working in a partnership with a long-standing traditon of success. EDIM is a consortium of Karlsruhe University (TH), GeoForschungsZentrum (GFZ) Potsdam, Humboldt University (HU) Berlin, lat/lon GmbH Bonn, DELPHI Informations Muster Management GmbH Potsdam, and Kandilli Observatory and Earthquake Research Institute (KOERI) of the Bogazici University in Istanbul. The integration of strong motion seismology, sensor system hard- and software development, and geoinformation real-time management tools prove a successful concept in making seismic early warning a novel technology with high potential for scientific and technological innovation, disaster mitigation, and many spin-offs for other fields. EDIM can serve as a model for further developments in the field of early warning on a global scale.

  14. MEGAPIE, a 1 MW pilot experiment for a liquid metal spallation target

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, G.S. [Paul Scherrer Institut, Spallation Neutron Source Division, Villigen-PSI (Switzerland); Salvatores, M. [CEA Cadarache, Direction des Reacteurs Nucleaires, Saint-Paul-lez-Durance Cedex (France); Heusener, G. [Forschungszentrum Karlsruhe, Projekt Nukleare Sicherheitsforschung, Karlsruhe (Germany)

    2001-03-01

    MEGAPIE (Megawatt Pilot Target Experiment) is an initiative launched by Commissariat a l'Energie Atomique, Cadarache (France) and Forschungszentrum Karlsruhe (Germany) in collaboration with Paul Scherrer Institut (Switzerland), to demonstrate, in an international collaboration, the feasibility of a liquid lead bismuth target for spallation facilities at a beam power level of 1 MW. Such a target is under consideration for various concepts of accelerator driven systems (ADS) to be used in transmutation of nuclear waste and other applications world-wide. It also has the potential of increasing significantly the thermal neutron flux available at the spallation neutron source (SINQ) for neutron scattering. SINQ's beam power being close to 1 MW already, this facility offers a unique opportunity to realize such an experiment with a reasonably small number of new ancillary systems. The paper describes the basic features of the experiment and its boundary conditions, the technical concept of the target and underlying research carried out at participating laboratories. (author)

  15. Robust Stereo Visual Odometry Using Improved RANSAC-Based Methods for Mobile Robot Localization.

    Science.gov (United States)

    Liu, Yanqing; Gu, Yuzhang; Li, Jiamao; Zhang, Xiaolin

    2017-10-13

    In this paper, we present a novel approach for stereo visual odometry with robust motion estimation that is faster and more accurate than standard RANSAC (Random Sample Consensus). Our method makes improvements in RANSAC in three aspects: first, the hypotheses are preferentially generated by sampling the input feature points on the order of ages and similarities of the features; second, the evaluation of hypotheses is performed based on the SPRT (Sequential Probability Ratio Test) that makes bad hypotheses discarded very fast without verifying all the data points; third, we aggregate the three best hypotheses to get the final estimation instead of only selecting the best hypothesis. The first two aspects improve the speed of RANSAC by generating good hypotheses and discarding bad hypotheses in advance, respectively. The last aspect improves the accuracy of motion estimation. Our method was evaluated in the KITTI (Karlsruhe Institute of Technology and Toyota Technological Institute) and the New Tsukuba dataset. Experimental results show that the proposed method achieves better results for both speed and accuracy than RANSAC.

  16. Energy and greenhouse balance of photocatalytic CO2 conversion to methanol

    Science.gov (United States)

    Haumann, D.; Goettlicher, G.; Muench, W.

    2012-10-01

    Within the Leading-Edge Cluster "Forum Organic Electronic", the research project "Solar2Fuel" funded by the German Ministry of education and research (BMBF) (2009 - 2012), EnBW, BASF, Karlsruhe Institute of Technology and Ruprecht-Karls-University of Heidelberg aim to develop a future solar powered CO2 to methanol conversion technology. CO2 from stationary sources such as power plants shall be catalytically converted together with water to a product such as methanol by use of solar irradiation. For this purpose a catalyst shall be developed. EnBW investigates the required boundary conditions to make such a principle interesting with respect to energy and greenhouse gas balance as well as economic evaluations. The assessment of boundary conditions includes the analysis of the whole chain from power generation, CO2 capture and transport, a virtual photocatalytic reactor, the product purification and use in the traffic sector. Most important technical factors of the process such as CO2 conversion efficiency is presented. CO2 capturing and liquefaction are the most energy intensive process steps, CO2 transport in pipeline is highly energy efficient and depending on energy need of the photoconversion step and the product purification, the overall greenhouse gas balance is comparable with the underground storage of the captured CO2.

  17. Methodology and application of high performance electrostatic field simulation in the KATRIN experiment

    Science.gov (United States)

    Corona, Thomas

    The Karlsruhe Tritium Neutrino (KATRIN) experiment is a tritium beta decay experiment designed to make a direct, model independent measurement of the electron neutrino mass. The experimental apparatus employs strong ( O[T]) magnetostatic and (O[10 5 V/m]) electrostatic fields in regions of ultra high (O[10-11 mbar]) vacuum in order to obtain precise measurements of the electron energy spectrum near the endpoint of tritium beta-decay. The electrostatic fields in KATRIN are formed by multiscale electrode geometries, necessitating the development of high performance field simulation software. To this end, we present a Boundary Element Method (BEM) with analytic boundary integral terms in conjunction with the Robin Hood linear algebraic solver, a nonstationary successive subspace correction (SSC) method. We describe an implementation of these techniques for high performance computing environments in the software KEMField, along with the geometry modeling and discretization software KGeoBag. We detail the application of KEMField and KGeoBag to KATRIN's spectrometer and detector sections, and demonstrate its use in furthering several of KATRIN's scientific goals. Finally, we present the results of a measurement designed to probe the electrostatic profile of KATRIN's main spectrometer in comparison to simulated results.

  18. Chemical and physical characterization of fertile soil-derived ice residuals from the Fifth International Ice Nucleation workshop in November 2014 (FIN-1)

    Science.gov (United States)

    Hiranuma, Naruki; Möhler, Ottmar; Kulkarni, Gourihar; Laskin, Alexander; Zelenyuk, Alla

    2017-04-01

    The climate impact of ice-nucleating particles (INPs) derived from fertile soils on global scale has been recently accented by their diversity and efficient freezing ability. However, their representation in atmospheric models is limited in part due to our incomplete knowledge of fertile soil composition, abundance and associated sensitivity to heterogeneous ice nucleation. To fill given knowledge gap, we have investigated a unique/rich set of ice crystal residual samples derived from a variety of fertile soil samples obtained through our participation in the Fifth International Ice Nucleation workshop (FIN-1). FIN-1 was held at the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) facility at Karlsruhe Institute of Technology (KIT), which is the world's foremost facility for studying ice clouds in a controlled setting, in November 2014 to comprehensively study the heterogeneous ice formation in the atmosphere with collaboration among 10 international groups that were funded through European consortium, NSF and USDOE agencies. Here, we will present the nanoscale surface morphology and elemental/molecular composition of ice crystal residuals as well as that of total aerosol samples from the FIN-1 activity to identify and classify any specific mineral and organic inclusions that may have promoted nucleation of ice. Comparing total aerosols to residuals will shed light on the composition and abundance of certain particle types in INPs. Acknowledgements: The valuable contributions of the INUIT (Ice Nuclei Research Unit) collaborators, the FIN organizers, their institutions and the FIN-1 Workshop science team are gratefully acknowledged.

  19. Simulations of transit spectra of Hot Jupiters in the wavelength range of the CARMENES infrared channel (0.96-1.7μm)

    Science.gov (United States)

    Sanchez-Lopez, A.; Lopez-Puertas, M.; Funke, B.; Amado, P. J.; Lara, L. M.; Salz, M.

    2017-03-01

    Transmission spectroscopy in the primary transit of an exoplanet has proven to be very useful for obtaining information of exoplanet atmospheres from both ground-based facilities and space telescopes. The Calar Alto high-Resolution search for M dwarfs with Exoearths with Near-infrared and optical Echelle Spectrographs (CARMENES) instrument has started being operative in early 2016 and here, we explore its capabilities for extracting information about Hot Jupiter atmospheres taking advantage of its ultra-stability, wide spectral interval (0.52 - 1.7 μm), and high spectral resolution (R = 82000). We present some preliminary results of our simulations of the primary transit transmission spectra of HD 189733b in the 1 - 1.7 μm m spectral range where several molecules, such as water vapour, carbon monoxide, carbon dioxide and methane, have strong ro-vibrational bands. Sensitivity studies are presented for the range of expected concentrations of these species, as well as for the expected range of temperature profiles. Our simulations have been performed using the line-by-line Karlsruhe Optimized and Precise Radiative Transfer Algorithm (KOPRA) adapted for exo-atmospheres.

  20. A trainlike vehicle for intervention missions inside nuclear plants

    Energy Technology Data Exchange (ETDEWEB)

    Littmann, F.; Villedieu, E.; Chameaud, H. (Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France))

    1992-01-01

    The Unite Robotique (part of the Direction of Advanced Technologies of Commissariat a l'Energie Atomique) has worked on nuclear robotics in the field of master/slave manipulators with their associated computer-aided teleoperation controls and mobile robots. The CENTAURE mobile robot is tracked (for stair climbing) and articulated (for obstacle crossing and turning on stair landings) with a mobile platform (for increasing stability), designed for inspection missions. For intervention missions, a vehicle is needed with larger payload capabilities (volume and mass) but with the same geometrical and environmental constraints. This paper deals with a new kind of trainlike vehicle designed for intervention missions inside nuclear facilities after an incident or accident. This idea was conceived in 1986 for the EUREKA program advanced mobile robot for civilian safety and is now entering a new phase with the TELEMAN program technology for advanced locomotion systems (in partnership with Kernforschungszentrum Karlsruhe for the locomotion and Cybernetix for the tests) with the building of a two-module linkage mockup and a locomotion mockup.

  1. GEO-SOLE - A comparative hydrogeological and technical evaluation of heat transfer fluids for near-surface geothermal applications; GEO-SOLE. Vergleichende hydrogeologische und anlagentechnische Bewertung von Waermetraegerfluessigkeiten fuer oberflaechennahe geothermische Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Koenigsdorff, Roland; Feuerstein, Philipp; Ryba, Meinhard [Hochschule Biberach (Germany). Inst. fuer Gebaeude- und Energiesysteme IGE

    2010-07-01

    Ground-coupled heat pump plants are commonly operated with mixtures of water and anti-freezing agents. Brines based on glycol are most frequently used, but there is also a variety of other organic and inorganic fluids available. Even the use of pure water is possible when frost-proof operation can be assured. The material properties of the fluids are well-known, but there exists no complete and consistent data basis to compare them, neither for the case of a leakage in the borehole heat exchanger's piping, nor with respect to the energy efficiency and operational characteristics of whole plants. The joint project GEO-SOLE of the Univerity of Applied Sciences Biberach (UASB) and the University Karlsruhe comprises experimental and theoretical investigations of various heat carrier fluids regarding their operational performance within heat pump plants and their characteristics when passing through the backfilling of boreholes and being dispersed within the ground. The results gained at UASB indicate that the thermal and energetic performance of the brines investigated show comparably small variations, i.e. not more then 5 % in the plant COP. The differences in the required borehole depth sum up to less than 10 % for turbulent flow. (orig.)

  2. Energy research for practice; Energieforschung fuer die Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Lang, Johannes (ed.) [FIZ Karlsruhe, Bonn (Germany). BINE Informationsdienst

    2006-07-01

    The BINE editorial team, experts with a background in engineering and journalism, provide information in an independent, experienced and critical manner. Current information from research and pilot projects is thoroughly researched and prepared in a target-group-oriented way. The three series of brochures (Projektinfo, Themeninfo and basisEnergie), which describe results and experience gathered from research projects, are geared toward those who could potentially apply this information in practice, i.e. developers, planners, consultants, investors, energy suppliers and occupants. These publications, as well as the BINE newsletter, can be subscribed to at no cost. At www.bine.info, the information provided is systematically interconnected with additional information. The BINE Information Service facilitates the transfer of knowledge and information from energy research to practice, while cooperating closely with companies and institutions which, within the framework of sponsored projects, work to make efficiency technologies and renewable energy sources ready for use. Numerous collaborations with establishments in the fields of research, education and practice, as well as with trade press and politicians, serve to accelerate the application of energy research topics. The BINE Information Service is provided by FIZ Karlsruhe and sponsored by the German Federal Ministry of Economics and Technology. (orig.)

  3. Gaseous 83mKr generator of monoenergetic electrons based on 83Rb deposited in zeolite

    Science.gov (United States)

    Sentkerestiová, J.; Vénos, D.; Slezák, M.

    2017-09-01

    The gaseous 83mKr electron source is currently used in neutrino mass experiments KATRIN and Project 8, dark matter experiments XENON, LUX and DarkSide, and ALICE (CERN) experiment. The main attractive features of this radioactive noble gas are its monoenergetic conversion electrons with well known energies and a half-life of 1.8 h, which is short enough to avoid any long-lasting contamination of the system. The long half-life of the mother 83Rb isotope (T1/2 = 86.2 d) enables more time demanding measurement. Particularly, in the neutrino mass experiments with gaseous tritium in which the 83mKr is applied in the same manner as the tritium, the K-32 conversion electrons with energy conveniently close to the beta spectrum endpoint represent an important test and calibration tool. Here, the design and characteristics of the gaseous 83mKr generator, including the 83mKr source itself, for KATRIN (KArlsruhe TRItium Neutrino) experiment are presented.

  4. Control of the environmental inluences on THe-Trap on the example of the determination of the mass ratio of carbon-12 to oxygen-16; Kontrolle der Umwelteinfluesse auf THe-Trap am Beispiel der Bestimmung des Massenverhaeltnisses von Kohlenstoff-12 zu Sauerstoff-16

    Energy Technology Data Exchange (ETDEWEB)

    Streubel, Sebastian Dennis

    2014-04-16

    Tritium-Helium-3-Trap (THe-Trap) is a Penning-trap setup dedicated to measure the {sup 3}H to {sup 3}He mass ratio with a relative uncertainty of better than 10{sup -11}. This is 40 times more precise than the currently adopted value and, thus, will help to investigate possible systematic uncertainties of the Karlsruhe Tritium Neutrino experiment (KATRIN). To achieve the desired level of uncertainty, several environmental influences such as atmospheric pressure shifts and magnetic field fluctuations have to be suppressed. With the implemented stabilization system, the relative magnetic field drift could be reduced to a few 10{sup -12}/h for a time span of several weeks. Within the context of this thesis a mass ratio measurement of {sup 12}C{sup 4+} to {sup 16}O{sup 5+} was performed to characterize systematic effects. This measurement yielded a statistical uncertainty of 6.3 x 10{sup -11}, which can easily be improved with more statistics, i.e. a longer measurement time. While the systematic uncertainty for {sup 12}C{sup 4+}-ions were under control at the 10{sup -11} level, the systematic shifts could not be quantified for {sup 16}O{sup 5+} due to poor vacuum conditions. Without these corrections, a systematic uncertainty of 1.2.10{sup -10} could be achieved for the {sup 12}C/{sup 16}O mass ratio measurement.

  5. Simulation of differential electron spectra in the KATRIN WGTS

    Energy Technology Data Exchange (ETDEWEB)

    Haussmann, Norman [Bergische Universitaet Wuppertal (Germany); Collaboration: KATRIN-Collaboration

    2016-07-01

    The KArlsruhe TRItium Neutrino (KATRIN) experiment aims to measure the effective electron antineutrino mass in a model-independent way with a sensitivity of 200 meV/c{sup 2} (90 % C.L.). In order to extract the neutrino mass the Windowless Gaseous Tritium Source (WGTS) properties of KATRIN need to be known to a high precision. For this reason several monitoring systems are installed. One of them, situated in the transport section, is the Forward Beam Monitor (FBM). The FBM is capable of recording the electron rate (10{sup 6} e/s.mm{sup 2}) and the differential electron spectra with a high energy resolution and precision. The electrons in the WGTS are emitted isotropically and guided magnetically. Thereby, the electrons undergo different effects changing their kinetic energy and angle to the guiding field. The major influence herein is elastic and inelastic scattering. Changes in the column density are expected to have a great influence on lower energetic electrons and thereby change the spectrum and count rate at the FBM-detector. Monte-Carlo simulations have been performed to understand the influences of varying column densities and temperature fluctuations on the expected count rate and spectra by tracking the emitted electrons. The results will be shown in this talk.

  6. Stability measurements of the electron gun for the KATRIN rear section

    Energy Technology Data Exchange (ETDEWEB)

    Ebenhoech, Sylvia [Karlsruhe Institute of Technology (KIT) (Germany). Institute for Technical Physics (ITEP), Tritium Laboratory Karlsruhe (TLK); Collaboration: KATRIN-Collaboration

    2016-07-01

    The aim of the KArlsruhe TRItium Neutrino (KATRIN) experiment is to determine the antineutrino mass with a sensitivity of 0.2 eV (90 % C.L.) by high-precision spectroscopy close to the tritium beta decay endpoint at 18.6 keV. To achieve the sensitivity aim both statistical and systematic uncertainties must be minimized. One contribution to the systematic error are uncertainties in the column density of the tritium source or in the source activity. In order to detect and monitor changes in the tritium source the Rear Section, which is integrated at the rear end of the KATRIN setup, is used. The Rear Section includes an angular selective electron gun (e-gun) based on the photoelectric effect. With the e-gun it will be possible e.g. to achieve a precise calibration of the column source density. To achieve the requirements on the e-gun a stable UV light source is essential to produce photoelectrons. The presentation focuses on the setup of the e-gun and intensity stability measurements of the UV light source setup.

  7. Tritium release from neutron irradiated beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reactortechnik

    1998-01-01

    One of the most important open issues related to beryllium for fusion applications refers to the kinetics of the tritium release as a function of neutron fluence and temperature. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating the beryllium response under neutron irradiation. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from the above mentioned irradiation experiments, trying to elucidate the tritium release controlling processes. In agreement with previous studies it has been found that release starts at about 500-550degC and achieves a maximum at about 700-750degC. The observed release at about 500-550degC is probably due to tritium escaping from chemical traps, while the maximum release at about 700-750degC is due to tritium escaping from physical traps. The consequences of a direct contact between beryllium and ceramics during irradiation, causing tritium implanting in a surface layer of beryllium up to a depth of about 40 mm and leading to an additional inventory which is usually several times larger than the neutron-produced one, are also presented and the effects on the tritium release are discussed. (author)

  8. Mechanical performance of irradiated beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Dalle-Donne, M.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reaktortechnik

    1998-01-01

    For the Helium Cooled Pebble Bed (HCPB) Blanket, which is one of the two reference concepts studied within the European Fusion Technology Programme, the neutron multiplier consists of a mixed bed of about 2 and 0.1-0.2 mm diameter beryllium pebbles. Beryllium has no structural function in the blanket, however microstructural and mechanical properties are important, as they might influence the material behavior under neutron irradiation. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating it. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from these irradiation experiments, emphasizing the effects of irradiation of essential material properties and trying to elucidate the processes controlling the property changes. The microstructure, the porosity distribution, the impurity content, the behavior under compression loads and the compatibility of the beryllium pebbles with lithium orthosilicate (Li{sub 4}SiO{sub 4}) during the in-pile irradiation are presented and critically discussed. Qualitative information on ductility and creep obtained by hardness-type measurements are also supplied. (author)

  9. Large Eddy simulations of flame/acoustics interactions in a swirl flow; Simulation aux grandes echelles des interactions flamme / acoustique dans un ecoulement vrille

    Energy Technology Data Exchange (ETDEWEB)

    Selle, L.

    2004-01-15

    Swirl flows exhibit a large variety of topologies, depending on the ratio of the flux axial momentum to the axial flux of tangential momentum: this ratio is called swirl number. Above a given critical value for the swirl number, the pressure gradient reverses the flow on the axis of rotation. This central recirculation zone is used in turbines for flame stabilization. And yet, reacting-swirled flows can exhibit combustion instabilities resulting from the coupling between acoustics and unsteady heat release. Combustion instabilities can lead to loss of control or even complete destruction of the system. Their prediction is impossible with standard engineering tools. The work presented here investigates the capabilities of numerical research tools for the prediction of combustion instabilities. Large-Eddy Simulation (LES) is implemented in a code solving the Navier-Stokes equations for compressible-multi-components fluids (code AVBP developed at CERFACS). This method takes into account for the major ingredients of combustion instabilities such as acoustics and flame / vortex interaction. The LES methodology is validated in the swirled flow from a complex industrial burner (SIEMENS PG). Both reactive and non-reactive regimes are successfully compared with experimental data in terms of mean temperature and mean and RMS velocities. Experimental measurements were performed at the university of Karlsruhe (Germany). A detailed analysis of the acoustics and its interaction with the flame front is performed with the code AVSP, also developed at CERFACS. (author)

  10. Influence of grain size distribution on dynamic shear modulus of sands

    Directory of Open Access Journals (Sweden)

    Dyka Ireneusz

    2017-11-01

    Full Text Available The paper presents the results of laboratory tests, that verify the correlation between the grain-size characteristics of non-cohesive soils and the value of the dynamic shear modulus. The problem is a continuation of the research performed at the Institute of Soil Mechanics and Rock Mechanics in Karlsruhe, by T. Wichtmann and T. Triantafyllidis, who derived the extension of the applicability of the Hardin’s equation describing the explicite dependence between the grain size distribution of sands and the values of dynamic shear modulus. For this purpose, piezo-ceramic bender elements generating elastic waves were used to investigate the mechanical properties of the specimens with artificially generated particle distribution. The obtained results confirmed the hypothesis that grain size distribution of non-cohesive soils has a significant influence on the dynamic shear modulus, but at the same time they have shown that obtaining unambiguous results from bender element tests is a difficult task in practical applications.

  11. Energy and its carriers

    Science.gov (United States)

    Schmid, G. Bruno

    1982-09-01

    Reports on the first course of a new physics curriculum developed at the Karlsruhe Institute for the Didactics of Physics (Falk and Herrmann 1977, 1978, 1979, 1981). The entire curriculum begins at the elementary school level with children aged 10-12 and is intended to extend beyond high school and through university studies (Falk and Ruppel 1975, 1976). Energy is introduced as the primary quantity at the very beginning of the course. It is not 'derived' from other seemingly more fundamental quantities such as mass, displacement, velocity and force. However, the course is not an ad hoc construction simply to explain the concept of energy. The essential features of many natural and technological processes can be understood by considering the flow of energy. This is the basic idea underlying the course, and can be restated more completely in terms of the following rule: 'something is happening whenever energy is flowing and a flow of energy is always accompanied by the flow of at least one other substance-like quantity'. The course strategy is designed to make this simple rule obvious by way of numerous examples taken from everyday life. Selected topics are highlighted and they introduce concepts unique to the authors approach. These concepts are presented in the same chronological order as they appear in the course.

  12. Market leaders` energy. Renewable energy sources - rational energy use; 4. tot. new rev. and enl. ed.; Marktfuehrer Energie. Erneuerbare Energien - Rationelle Energieverwendung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This directoy gives a complete overview of companies and institutions engaged in the sectors of renewable energy sources and rational energy use. Research institutions, manufacturers, planners, associations, societies, advisory and training institutions etc. are indicated by technical fields. Each entry contains not only the name and address of the institution including its head and contact person but also information on the type of the institution, a brief description of the respective fields of activity, and technical key words. This revised and updated volume contains more than 2300 entries and was prepared on the basis of a questionnaire evaluated by the BINE information service on new energy technologies, renewable resources, and the environment. (orig.) [Deutsch] Der Marktfuehrer ENERGIE enthaelt ueber 2.300 Adresseintraege von Firmen und Institutionen, die im Bereich Erneuerbare Energiequellen und Rationelle Energieverwendung taetig sind: Hersteller, Planer, Beratungs- und Forschungsinstitutionen sowie Aus- und Weiterbildungseinrichtungen. Jeder Eintrag enthaelt die Adresse, den Ansprechpartner, eine kurze Selbstbeschreibung sowie fachliche Schlagworte. Der Informationsdienst BINE (Buerger-Information Neue Energietechniken, Umwelt) des Fachinformationszentrums Karlsruhe wird vom Bundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie gefoerdert. Er informiert die interessierte Oeffentlichkeit und Fachleute ueber neue, umweltfreundliche Energietechniken und ihre Anwendung im Wohnungsbau, Gewerbe, Industrie und Kommunen. (orig.)

  13. Experimental validation of a self-calibrating cryogenic mass flowmeter

    Science.gov (United States)

    Janzen, A.; Boersch, M.; Burger, B.; Drache, J.; Ebersoldt, A.; Erni, P.; Feldbusch, F.; Oertig, D.; Grohmann, S.

    2017-12-01

    The Karlsruhe Institute of Technology (KIT) and the WEKA AG jointly develop a commercial flowmeter for application in helium cryostats. The flowmeter functions according to a new thermal measurement principle that eliminates all systematic uncertainties and enables self-calibration during real operation. Ideally, the resulting uncertainty of the measured flow rate is only dependent on signal noises, which are typically very small with regard to the measured value. Under real operating conditions, cryoplant-dependent flow rate fluctuations induce an additional uncertainty, which follows from the sensitivity of the method. This paper presents experimental results with helium at temperatures between 30 and 70 K and flow rates in the range of 4 to 12 g/s. The experiments were carried out in a control cryostat of the 2 kW helium refrigerator of the TOSKA test facility at KIT. Inside the cryostat, the new flowmeter was installed in series with a Venturi tube that was used for reference measurements. The measurement results demonstrate the self-calibration capability during real cryoplant operation. The influences of temperature and flow rate fluctuations on the self-calibration uncertainty are discussed.

  14. Validation of the scale system for PWR spent fuel isotopic composition analyses

    Energy Technology Data Exchange (ETDEWEB)

    Hermann, O.W.; Bowman, S.M.; Parks, C.V. [Oak Ridge National Lab., TN (United States); Brady, M.C. [Sandia National Laboratories, Las Vegas, NV (United States)

    1995-03-01

    The validity of the computation of pressurized-water-reactor (PWR) spent fuel isotopic composition by the SCALE system depletion analysis was assessed using data presented in the report. Radiochemical measurements and SCALE/SAS2H computations of depleted fuel isotopics were compared with 19 benchmark-problem samples from Calvert Cliffs Unit 1, H. B. Robinson Unit 2, and Obrigheim PWRs. Even though not exhaustive in scope, the validation included comparison of predicted and measured concentrations for 14 actinides and 37 fission and activation products. The basic method by which the SAS2H control module applies the neutron transport treatment and point-depletion methods of SCALE functional modules (XSDRNPM-S, NITAWL-II, BONAMI, and ORIGEN-S) is described in the report. Also, the reactor fuel design data, the operating histories, and the isotopic measurements for all cases are included in detail. The underlying radiochemical assays were conducted by the Materials Characterization. Center at Pacific Northwest Laboratory as part of the Approved Testing Material program and by four different laboratories in Europe on samples processed at the Karlsruhe Reprocessing Plant.

  15. Voxel2MCNP: a framework for modeling, simulation and evaluation of radiation transport scenarios for Monte Carlo codes

    Science.gov (United States)

    Pölz, Stefan; Laubersheimer, Sven; Eberhardt, Jakob S.; Harrendorf, Marco A.; Keck, Thomas; Benzler, Andreas; Breustedt, Bastian

    2013-08-01

    The basic idea of Voxel2MCNP is to provide a framework supporting users in modeling radiation transport scenarios using voxel phantoms and other geometric models, generating corresponding input for the Monte Carlo code MCNPX, and evaluating simulation output. Applications at Karlsruhe Institute of Technology are primarily whole and partial body counter calibration and calculation of dose conversion coefficients. A new generic data model describing data related to radiation transport, including phantom and detector geometries and their properties, sources, tallies and materials, has been developed. It is modular and generally independent of the targeted Monte Carlo code. The data model has been implemented as an XML-based file format to facilitate data exchange, and integrated with Voxel2MCNP to provide a common interface for modeling, visualization, and evaluation of data. Also, extensions to allow compatibility with several file formats, such as ENSDF for nuclear structure properties and radioactive decay data, SimpleGeo for solid geometry modeling, ImageJ for voxel lattices, and MCNPX’s MCTAL for simulation results have been added. The framework is presented and discussed in this paper and example workflows for body counter calibration and calculation of dose conversion coefficients is given to illustrate its application.

  16. Simulating Terrestrial Gamma Ray Flashes due to cosmic ray shower electrons and positrons

    Science.gov (United States)

    Connell, Paul

    2017-04-01

    The University of Valencia has developed a software simulator LEPTRACK to simulate the relativistic runaway electron avalanches, RREA, that are presumed to be the cause of Terrestrial Gamma Ray Flashes and their powerful accompanying Ionization/Excitation Flashes. We show here results of LEPTRACK simulations of RREA by the interaction of MeV energy electrons/positrons and photons in cosmic ray showers traversing plausible electric field geometries expected in storm clouds. The input beams of MeV shower products were created using the CORSIKA software package from the Karlsruhe Institute of Technology. We present images, videos and plots showing the different Ionization, Excitation and gamma-ray photon density fields produced, along with their time and spatial profile evolution, which depend critically on where the line of shower particles intercept the electric field geometry. We also show a new effect of incoming positrons in the shower, which make up a significant fraction of shower products, in particular their apparent "orbiting" within a high altitude negative induced shielding charge layer, which has been conjectured to produce a signature microwave emission, as well as a short range 511 keV annihilation line. The interesting question posed is if this conjectured positron emission can be observed and correlated with TGF orbital observations to show if a TGF originates in the macro E-fields of storm clouds or the micro E-fields of lightning leaders where this positron "orbiting" is not likely to occur.

  17. Reactor transient analyses with KIN3D/PARTISN

    Energy Technology Data Exchange (ETDEWEB)

    Gabrielli, F.; Rineiski, A.; Maschek, W.; Marchetti, M. [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2013-07-01

    Efforts are going on at the Karlsruhe Institute of Technology (KIT) to extend the kinetics capability of the PARTISN code in order to run in parallel two- and three-dimensional transient analyses with the quasistatic method, while taking into account delayed neutrons. In the original code version, time-dependent transport problems are solved by employing a semi-implicit direct kinetics option, the delayed neutrons being not taken into account. The PARTISN 5.97 code has been extended and then coupled with KIN3D, a time-dependent model embedded in the ERANOS code system. In the coupled code, PARTISN 5.97 is used as neutron transport solver to perform transient analyses while employing direct and quasi-static kinetics options of KIN3D. The coupled code can be also applied for first-order and exact perturbation theory calculations. In the paper, the PARTISN 5.97 extensions and coupling procedure are described and the performances of the KIN3D/PARTISN coupled code are investigated by analyzing transients induced by a source-jerk in a three-dimensional ADS model driven by an external source. (authors)

  18. Nocturnal Low-level Jet Evolution in a Broad Valley Observed by Dual Doppler Lidar

    Directory of Open Access Journals (Sweden)

    Thomas Damian

    2014-09-01

    Full Text Available The temporal evolution of a nocturnal low-level jet (LLJ in the 40km$40\\,\\text{km}$ broad Rhine Valley near Karlsruhe is studied, in the framework of a case study, with two heterodyne detection Doppler lidars using the new scan concept of “virtual towers”. For validation of this measuring technique, we performed comparative case studies with a tethered balloon and the highly instrumented 200m$200\\,\\text{m}$ KIT tower. The findings show capabilities of the virtual tower technique for wind measurements. Virtual towers can be placed at all locations within the range of Lidar measurements. Associated with nocturnal stable stratification, the LLJ, a wind speed maximum of about 9ms-1$9\\,\\text{m}\\,\\text{s}^{-1}$, develops at 100m$100\\,\\text{m}$ to 150m$150\\,\\text{m}$ agl, but the wind does not show the typical clockwise wind direction change that is reported in many other studies. This is attributed to the channeling effect occurring in broad valleys like the Rhine Valley when the boundary layer is stably stratified. Such channeling means a significant deviation of the wind direction from the Ekman spiral so that low-altitude winds turn into valley-parallel direction.

  19. The Numerical Wind Atlas - the KAMM/WAsP Method

    Energy Technology Data Exchange (ETDEWEB)

    Frank, H.P.; Rathmann, O.; Mortensen, N.G.; Landberg, L.

    2001-06-01

    The method of combining the Karlsruhe Atmospheric Mesoscale Model, KAMM, with the Wind Atlas Analysis and Application Program, WAsP, to make local predictions of the wind resource is presented. It combines the advantages of meso-scale modeling - overview over a big region and use of global data bases - with the local prediction capacity of the small-scale model WAsP. Results are presented for Denmark, Ireland, Northern Portugal and Galicia, and the Faroe Islands. Wind atlas files were calculated from wind data simulated with the meso-scale model using model grids with a resolution of 2.5, 5, and 10 km. Using these wind atlas files in WAsP the local prediction of the mean wind does not depend on the grid resolution of the meso-scale model. The local predictions combining KAMM and WAsP are much better than simple interpolation of the wind simulated by KAMM. In addition an investigation was made on the dependence of wind atlas data on the size of WAsP-maps. It is recommended that a topographic map around a site should extend 10 km out from it. If there is a major roughness change like a coast line further away in a frequent wind direction this should be included at even greater distances, perhaps up to 20 km away.

  20. Henry Rudolf Hertz (the 160th anniversary of his birth

    Directory of Open Access Journals (Sweden)

    V. P. Samokhin

    2017-01-01

    Full Text Available A brief overview of the main achievements of Heinrich Hertz, an outstanding German physicist, has been shown to prove to the whole world the existence of electromagnetic waves. Biographical information and details of Hertz's education, his work in Hermann Helmholtz's laboratory, as well as interesting facts from his life and work are given. These include the unique experimental work performed by Hertz, a professor at the Higher Technical School in Karlsruhe, using the emitter of electromagnetic waves - the "Hertz Vibrator" - and their own design receiver. Along with James Maxwell and Oliver Heaviside, Hertz can be considered the founder of electrodynamics: he received electromagnetic waves predicted by Maxwell's theory, showed their identity with light waves and gave a classical calculation of the electromagnetic radiation of the simplest vibrator. Hertz's discoveries formed the basis for the theory of radiation of radio waves and methods for calculating antennas, and became the basis for the birth of the era of wireless communications, radio and television.

  1. Automatic detection of measurement points for non-contact vibrometer-based diagnosis of cardiac arrhythmias

    Science.gov (United States)

    Metzler, Jürgen; Kroschel, Kristian; Willersinn, Dieter

    2017-03-01

    Monitoring of the heart rhythm is the cornerstone of the diagnosis of cardiac arrhythmias. It is done by means of electrocardiography which relies on electrodes attached to the skin of the patient. We present a new system approach based on the so-called vibrocardiogram that allows an automatic non-contact registration of the heart rhythm. Because of the contactless principle, the technique offers potential application advantages in medical fields like emergency medicine (burn patient) or premature baby care where adhesive electrodes are not easily applicable. A laser-based, mobile, contactless vibrometer for on-site diagnostics that works with the principle of laser Doppler vibrometry allows the acquisition of vital functions in form of a vibrocardiogram. Preliminary clinical studies at the Klinikum Karlsruhe have shown that the region around the carotid artery and the chest region are appropriate therefore. However, the challenge is to find a suitable measurement point in these parts of the body that differs from person to person due to e. g. physiological properties of the skin. Therefore, we propose a new Microsoft Kinect-based approach. When a suitable measurement area on the appropriate parts of the body are detected by processing the Kinect data, the vibrometer is automatically aligned on an initial location within this area. Then, vibrocardiograms on different locations within this area are successively acquired until a sufficient measuring quality is achieved. This optimal location is found by exploiting the autocorrelation function.

  2. Deformalisation of the energy-administrative third contestation complaint. Gleanings to the citiworks decisions of OLG Naumburg, BGH and EuGH; Entformalisierung der energieverwaltungsrechtlichen Drittanfechtungsbeschwerde. Nachlese zu den citiworks-Entscheidungen von OLG Naumburg, BGH und EuGH

    Energy Technology Data Exchange (ETDEWEB)

    Bien, Florian [Tuebingen Univ. (Germany). Lehrstuhl fuer Buergerliches, Handels- und Wirtschaftsrecht

    2009-10-15

    The decision of the Federal High Court (Karlsruhe, Federal Republic of Germany) according to citiworks supplies two important innovations regarding to the formalised testing of validity of third complaints in the energy administrative law. An extended interpretation of paragraph 75 sect. 2 EnWG (Energy Economy Act) results that the authorization for the complaint also is entitled to such third persons whose application for additional load was rejected by the regulation authority alone due to procedure-economic reasons. To that extent, the Federal High Court transfers the guiding principle being expressed for the fusion monitoring procedure in the popcorn resolution to the energy administrative law. Beyond this, the Federal High Court wants to do without the condition of the punctual application of a request of additional load in certain cases. This is the case if the third complaint leader could not obtain knowledge from the execution of the procedure. Independently of formal conditions, only thus third persons have the privilege of an authorization of complaint who can assert a violation in subjective-public third rights. Independently of the question of the subjectively public third rights in the EnWG, the practical problem remains that no insight into the procedure documents is granted to them due to missing additional loads. This makes an estimation of the risk of a judicial procedure more difficult.

  3. Role of adipose tissue in facial aging

    Directory of Open Access Journals (Sweden)

    Wollina U

    2017-12-01

    Full Text Available Uwe Wollina,1 Reinhard Wetzker,2 Mohamed Badawy Abdel-Naser,3 Ilja L Kruglikov4 1Department of Dermatology and Allergology, Academic Teaching Hospital Dresden-Friedrichstadt, Dresden, 2Department of Anesthesiology and Intensive Care Medicine, and Center for Sepsis Control and Care, Jena University Hospital, Jena, Germany; 3Department of Dermatology and Venereology, Ain Shams University Hospital, Cairo, Egypt; 4Wellcomet GmbH, Karlsruhe, Germany Abstract: Age-dependent modification of the facial subcutaneous white adipose tissue (sWAT connected with reduction of its volume, modification of collagen content and adhesion between dermal and adipose layers can significantly influence mechanical stability of the skin and cause the development of aging symptoms such as wrinkles. Typical aging appearance in facial skin is at least partly connected with special phenotypical features of facial preadipocytes and mature adipocytes. In this paper, we have discussed the possible roles of local inflammation, compartmental structure of facial sWAT and trans-differentiation processes such as beiging of white adipocytes and adipocyte-myofibroblast transition in facial skin aging. Keywords: facial aging, adipose tissue, preadipocytes, adipocytes, inflammation, beiging, adipocyte-myofibroblast transition 

  4. Measuring the radio emission of cosmic ray air showers with LOPES

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, F.G., E-mail: Frank.Schroeder@kit.ed [Institut fuer Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Apel, W.D. [Institut fuer Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Arteaga, J.C. [Institut fuer Experimentelle Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Asch, T. [Institut fuer Prozessdatenverarbeitung und Elektronik, Karlsruhe Institute of Technology (KIT) (Germany); Badea, F. [Institut fuer Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Baehren, L. [Department of Astrophysics, Radboud University Nijmegen (Netherlands); Bekk, K. [Institut fuer Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie Bonn (Germany); Bluemer, J. [Institut fuer Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Institut fuer Experimentelle Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Bozdog, H. [Institut fuer Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen (Germany); Buitink, S. [Department of Astrophysics, Radboud University Nijmegen (Netherlands); Cantoni, E. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Istituto di Fisica dello Spazio Interplanetario, INAF Torino (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Daumiller, K. [Institut fuer Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany); Souza, V. de [Institut fuer Experimentelle Kernphysik, Karlsruhe Institute of Technology (KIT) (Germany)

    2010-05-21

    When ultra high energy cosmic rays hit the atmosphere, they produce a shower of millions of secondary particles. Thereby the charged particles in the shower emit a radio pulse whilst deflected in the Earth's magnetic field. LOPES is a digital antenna array measuring these radio pulses in the frequency range from 40 to 80 MHz. It is located at the site of and triggered by the air shower experiment KASCADE-Grande at Karlsruhe Institute of Technology (KIT), Germany. In its present configuration, it consists of 15 east-west-polarized and 15 north-south-polarized, absolutely calibrated short dipole antennas, as well as 10 LPDAs (with two channels each). Furthermore, it serves as a test bench for technological developments, like new antenna types or a radio-based self-triggering (LOPES{sup STAR}). To achieve a good angular reconstruction and to digitally form a beam into the arrival direction of the shower, it has a precise time calibration.

  5. Status of the KASCADE-Grande experiment

    Energy Technology Data Exchange (ETDEWEB)

    Di Pierro, F. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy)], E-mail: federicodipierro@to.infn.it; Apel, W.D.; Badea, F.; Bekk, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Bercuci, A. [National Institute of Physics and Nuclear Engineering, 7690 Bucharest (Romania); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Bluemer, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, 76021 Karlsruhe (Germany); Bozdog, H. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, 7690 Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen, 57068 Siegen (Germany); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, 76021 Karlsruhe (Germany); Daumiller, K.; Doll, P.; Engel, R.; Engler, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Ghia, P.L. [Istituto di Fisica dello Spazio Interplanetario, INAF, 10133 Torino (Italy); Gils, H.J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Glasstetter, R. [Fachbereich Physik, Universitaet Wuppertal, 42097 Wuppertal (Germany)] (and others)

    2007-03-15

    The KASCADE-Grande experiment, located at Forschungszentrum Karlsruhe (Germany), is a multi component extensive air-shower experiment dedicated to the study of cosmic-rays and their interactions at primary energies 10{sup 14}-10{sup 18}eV. The main goal of the experiment is the detection of the 'iron-knee' in the energy spectrum at around 10{sup 17} eV, which is expected following the KASCADE and EAS-TOP observations where the positions of the knees of individual mass groups suggest a rigidity dependence. The experiment consists of the former KASCADE (detecting the electromagnetic, the muonic at different energy thresholds and the hadronic components) and Grande, which is an array of plastic scintillators providing a large acceptance area (0.5 km{sup 2}). In addition the experiment measures in coincidence with the LOPES radio antennas. The experimental set-up, the EAS reconstruction accuracies and first studies, based on 1 year of data taking, are presented.

  6. Investigations of the radio signal of inclined showers with LOPES

    Energy Technology Data Exchange (ETDEWEB)

    Saftoiu, A., E-mail: allixme@gmail.com [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Apel, W.D. [Karlsruhe Institute of Technology (KIT), Institut fuer Kernphysik, 76021 Karlsruhe (Germany); Arteaga, J.C. [Karlsruhe Institute of Technology (KIT), Institut fuer Experimentelle Kernphysik, 76021 Karlsruhe (Germany); Asch, T. [Karlsruhe Institute of Technology (KIT), Institut fuer Prozessdatenverarbeitung und Elektronik, 76021 Karlsruhe (Germany); Baehren, L. [Radboud University Nijmegen, Department of Astrophysics (Netherlands); Bekk, K. [Karlsruhe Institute of Technology (KIT), Institut fuer Kernphysik, 76021 Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell& #x27; Universita Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie Bonn (Germany); Bluemer, J. [Karlsruhe Institute of Technology (KIT), Institut fuer Kernphysik, 76021 Karlsruhe (Germany); Karlsruhe Institute of Technology (KIT), Institut fuer Experimentelle Kernphysik, 76021 Karlsruhe (Germany); Bozdog, H. [Karlsruhe Institute of Technology (KIT), Institut fuer Kernphysik, 76021 Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Buchholz, P. [Universitaet Siegen, Fachbereich Physik (Germany); Buitink, S. [Radboud University Nijmegen, Department of Astrophysics (Netherlands); Cantoni, E. [Dipartimento di Fisica Generale dell& #x27; Universita Torino (Italy); INAF Torino, Istituto di Fisica dello Spazio Interplanetario (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell& #x27; Universita Torino (Italy); and others

    2012-01-11

    We report in this paper on an analysis of 20 months of data taken with LOPES. LOPES is radio antenna array set-up in coincidence with the Grande array, both located at the Karlsruhe Institute of Technology, Germany. The data used in this analysis were taken with an antenna configuration composed of 30 inverted V-shape dipole antennas. We have restricted the analysis to a special selection of inclined showers - with zenith angle {theta}>40{sup Ring-Operator }. These inclined showers are of particular interest because they are the events with the largest geomagnetic angles and are therefore suitable to test emission models based on geomagnetic effects.The reconstruction procedure of the emitted radio signal in EAS uses as one ingredient the frequency-dependent antenna gain pattern which is obtained from simulations. Effects of the applied antenna model in the calibration procedure of LOPES are studied. In particular, we have focused on one component of the antenna, a metal pedestal, which generates a resonance effect, a peak in the amplification pattern where it is the most affecting high zenith angles, i.e. inclined showers. In addition, polarization characteristics of inclined showers were studied in detail and compared with the features of more vertical showers for the two cases of antenna models, with and without the pedestal.

  7. The LOPES experiment

    Energy Technology Data Exchange (ETDEWEB)

    Link, Katrin, E-mail: katrin.link@kit.edu [Karlsruhe Institute of Technology (KIT), Institut fuer Experimentelle Kernphysik, 76021 Karlsruhe (Germany); Apel, W.D. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Arteaga, J.C. [Karlsruhe Institute of Technology (KIT), Institut fuer Experimentelle Kernphysik, 76021 Karlsruhe (Germany); Asch, T. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Prozessdatenverarbeitung und Elektronik (Germany); Baehren, L. [Radboud University Nijmegen, Department of Astrophysics (Netherlands); Bekk, K. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie Bonn (Germany); Bluemer, J. [Karlsruhe Institute of Technology (KIT), Institut fuer Experimentelle Kernphysik, 76021 Karlsruhe (Germany); Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Bozdog, H. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Buchholz, P. [Universitaet Siegen, Fachbereich Physik (Germany); Buitink, S. [Radboud University Nijmegen, Department of Astrophysics (Netherlands); Cantoni, E. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); INAF Torino, Istituto di Fisica dello Spazio Interplanetario (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita Torino (Italy); Daumiller, K. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany); Souza, V. de [Karlsruhe Institute of Technology (KIT), Institut fuer Experimentelle Kernphysik, 76021 Karlsruhe (Germany); Doll, P.; Engel, R. [Karlsruhe Institute of Technology (KIT) - Campus North, Institut fuer Kernphysik (Germany)

    2011-03-15

    Cosmic ray particles hit the Earth's atmosphere and induce extensive air showers (EAS). These EAS mainly consist of electrons and positrons that produce radio emission due to their interaction with the Earth's magnetic field. Measuring this radio emission is the purpose of the LOPES (LOFAR Prototype Station) experiment. LOPES is located at Campus North of the Karlsruhe Institute of Technology at the same site as the EAS particle detector KASCADE-Grande. Since the first measurements in 2003, LOPES was improved by various experimental setups and could establish the radio technique. By now, detailed studies of the measured radio signal are performed, like the behaviour of the lateral distribution or the polarization of the electric field. Furthermore, with LOPES the dependence of the radio pulse on properties of the incoming cosmic ray, like primary energy, primary mass, or incoming direction is investigated. In this article we describe the different LOPES setups, next we explain our standard analysis procedure and then we discuss some highlights of our recent results.

  8. Recent Results from KASCADE-Grande and LOPES

    Energy Technology Data Exchange (ETDEWEB)

    Kampert, K.-H., E-mail: kampert@uni-wuppertal.d [Fachbereich Physik, Universitaet Wuppertal, 42097 Wuppertal (Germany); Apel, W.D. [Institut fuer Kernphysik, Forschungszentrum, Karlsruhe, D-76021 Karlsruhe (Germany); Arteaga, J.C. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Asch, T. [Inst. Prozessdatenverarb. und Elektronik, Forschungszentrum Karlsruhe, D-76021 Karlsruhe (Germany); Badea, F. [Institut fuer Kernphysik, Forschungszentrum, Karlsruhe, D-76021 Karlsruhe (Germany); Baehren, L. [Dept. of Astrophysics, Radboud University Nijmegen, 6525 ED Nijmegen (Netherlands); Bekk, K. [Institut fuer Kernphysik, Forschungszentrum, Karlsruhe, D-76021 Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie, 53010 Bonn (Germany); Bluemer, J. [Institut fuer Kernphysik, Forschungszentrum, Karlsruhe, D-76021 Karlsruhe (Germany); Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Bozdog, H. [Institut fuer Kernphysik, Forschungszentrum, Karlsruhe, D-76021 Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, P.O. Box Mg-6, RO-7690 Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen, 57068 Siegen (Germany); Buitink, S. [Dept. of Astrophysics, Radboud University Nijmegen, 6525 ED Nijmegen (Netherlands); Cantoni, E. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Istituto di Fisica dello Spazio Interplanetario, INAF, 10133 Torino (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, D-76021 Karlsruhe (Germany); Daumiller, K. [Institut fuer Kernphysik, Forschungszentrum, Karlsruhe, D-76021 Karlsruhe (Germany)

    2009-05-15

    KASCADE-Grande is an extensive air-shower experiment located at Forschungszentrum Karlsruhe, Germany. Main parts of the experiment are the Grande array spread over an area of 700x700 m{sup 2}, the original KASCADE array covering 200x200 m{sup 2} with unshielded and shielded detectors, and additional muon tracking devices. This multi-detector system allows to investigate the energy spectrum, composition, and anisotropies of cosmic rays in the energy range up to 1 EeV. LOPES is co-located at the same site to measure radio pulses from extensive air showers in coincidence with KASCADE-Grande. It consists of 30 digital antennas operated in different geometrical configurations. Read out is performed at high bandwidths and rate data processing with the aim to calibrate the emitted signal in the primary energy range of 10{sup 16}-10{sup 18} eV by making use of reconstructed air-shower observables of KASCADE-Grande. An overview on the performance of both experiments will be given and recent analysis results be reported.

  9. Confronting the EPOS-LHC model predictions on the charged particle and muon attenuation lengths of EAS with the measurements of the KASCADE-Grande observatory

    Directory of Open Access Journals (Sweden)

    Arteaga-Velázquez J.C.

    2015-01-01

    Full Text Available KASCADE-Grande was an air-shower experiment designed to study cosmic rays between 1016 and 1018 eV. The instrument was located at the site of the Karlsruhe Institute of Technology, Germany at an altitude of 110 m a.s.l. and covered an area of 0.5 km2. KASCADE-Grande consisted of several detector systems dedicated to measure different components of the EAS generated by the primary cosmic rays, i.e., the muon and the electron contents of the air-shower. With such a number of EAS observables and the precision of the measurements, the KASCADE-Grande data can be used to not only study in detail the properties of cosmic rays but also to test the predictions of hadronic-interaction models. In this work, in particular, the attenuation lengths of the muon number and the charged number of particles of EAS in the atmosphere were extracted from the KASCADE-Grande data and the results were compared with the predictions of the new EPOS-LHC hadronic-interaction model.

  10. KASCADE-Grande: An overview and first results

    Energy Technology Data Exchange (ETDEWEB)

    Bertaina, M. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy)], E-mail: bertaina@to.infn.it; Apel, W.D. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Arteaga, J.C. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, 76021 Karlsruhe (Germany); Badea, F.; Bekk, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Bluemer, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, 76021 Karlsruhe (Germany); Bozdog, H. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, 7690 Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen, 57068 Siegen (Germany); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, 76021 Karlsruhe (Germany); Daumiller, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Souza, V. de [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, 76021 Karlsruhe (Germany); Di Pierro, F. [Dipartimento di Fisica Generale dell' Universita, 10125 Torino (Italy); Doll, P.; Engel, R.; Engler, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Finger, M. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe, 76021 Karlsruhe (Germany); Fuhrmann, D. [Fachbereich Physik, Universitaet Wuppertal, 42097 Wuppertal (Germany)] (and others)

    2008-04-01

    The KASCADE-Grande experiment, located at Forschungszentrum Karlsruhe (Germany), is a multi-component extensive air-shower experiment to study cosmic rays and their interactions at primary energies 10{sup 14}-10{sup 18} eV. After detailed investigations of the knee in the spectrum with KASCADE and EAS-TOP experiments, the main goal of KASCADE-Grande is to provide conclusive results on the knee region by detecting the expected iron knee in the spectrum at around 10{sup 17} eV, and measuring the composition in the possible transition region between galactic and extragalactic components. Due to its multi-component characteristics, basically the former KASCADE experiment enriched by two new arrays of scintillator detectors (Grande and Piccolo), with the aim of providing a large acceptance area (0.5 km{sup 2}) and prompt trigger signal, KASCADE-Grande is a suitable array to provide refined measurements in the 10{sup 16}-10{sup 18} eV region. In the following, we briefly report on the characteristics of the detector, its performance, and first results based on 2 years of data taking.

  11. Air shower measurements with the LOPES radio antenna array

    Energy Technology Data Exchange (ETDEWEB)

    Haungs, A. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany)], E-mail: andreas.haungs@ik.fzk.de; Apel, W.D. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Arteaga, J.C. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe (Germany); Asch, T. [Inst. Prozessdatenverarbeitung und Elektronik, Forschungszentrum Karlsruhe (Germany); Auffenberg, J. [Fachbereich Physik, Universitaet Wuppertal (Germany); Badea, F. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Baehren, L. [Department of Astrophysics, Radboud University Nijmegen (Netherlands); Bekk, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Biermann, P.L. [Max-Planck-Institut fuer Radioastronomie, Bonn (Germany); Bluemer, J. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe (Germany); Bozdog, H. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Brueggemann, M.; Buchholz, P. [Fachbereich Physik, Universitaet Siegen (Germany); Buitink, S. [Department of Astrophysics, Radboud University Nijmegen (Netherlands); Cantoni, E. [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Istituto di Fisica dello Spazio Interplanetario, INAF, Torino (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Universitaet Karlsruhe (Germany); Daumiller, K. [Institut fuer Kernphysik, Forschungszentrum Karlsruhe (Germany)] (and others)

    2009-06-01

    LOPES is set up at the location of the KASCADE-Grande extensive air shower experiment in Karlsruhe, Germany and aims to measure and investigate radio pulses from extensive air showers. Since radio waves suffer very little attenuation, radio measurements allow the detection of very distant or highly inclined showers. These waves can be recorded day and night, and provide a bolometric measure of the leptonic shower component. LOPES is designed as a digital radio interferometer using high bandwidths and fast data processing and profits from the reconstructed air shower observables of KASCADE-Grande. The LOPES antennas are absolutely amplitude calibrated allowing to reconstruct the electric field strength which can be compared with predictions from detailed Monte-Carlo simulations. We report about the analysis of correlations present in the radio signals measured by the LOPES 30 antenna array. Additionally, LOPES operates antennas of a different type (LOPES{sup STAR}) which are optimized for an application at the Pierre Auger Observatory. Status, recent results of the data analysis and further perspectives of LOPES and the possible large scale application of this new detection technique are discussed.

  12. Latest results and perspectives of the KASCADE-Grande EAS Facility

    Energy Technology Data Exchange (ETDEWEB)

    Haungs, A., E-mail: haungs@kit.edu [Karlsruhe Institute of Technology (KIT - Campus North), Institut fuer Kernphysik, Karlsruhe (Germany); Apel, W.D. [Karlsruhe Institute of Technology (KIT - Campus North), Institut fuer Kernphysik, Karlsruhe (Germany); Arteaga-Velazquez, J.C. [Karlsruhe Institute of Technology (KIT - Campus South), Institut fuer Experimentelle Kernphysik, Karlsruhe (Germany); Bekk, K. [Karlsruhe Institute of Technology (KIT - Campus North), Institut fuer Kernphysik, Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell& #x27; Universita Torino (Italy); Bluemer, J. [Karlsruhe Institute of Technology (KIT - Campus North), Institut fuer Kernphysik, Karlsruhe (Germany); Karlsruhe Institute of Technology (KIT - Campus South), Institut fuer Experimentelle Kernphysik, Karlsruhe (Germany); Bozdog, H. [Karlsruhe Institute of Technology (KIT - Campus North), Institut fuer Kernphysik, Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Buchholz, P. [Universitaet Siegen, Fachbereich Physik (Germany); Cantoni, E. [Dipartimento di Fisica Generale dell& #x27; Universita Torino (Italy); INAF Torino, Istituto di Fisica dello Spazio Interplanetario (Italy); Chiavassa, A. [Dipartimento di Fisica Generale dell& #x27; Universita Torino (Italy); Cossavella, F. [Karlsruhe Institute of Technology (KIT - Campus South), Institut fuer Experimentelle Kernphysik, Karlsruhe (Germany); Daumiller, K. [Karlsruhe Institute of Technology (KIT - Campus North), Institut fuer Kernphysik, Karlsruhe (Germany); and others

    2012-01-11

    KASCADE-Grande is a multi-detector experiment at KIT (Karlsruhe Institute of Technology) in Germany for measuring extensive air showers in the primary energy range of 100 TeV to 1 EeV. This paper does not provide a synopsis of all results of the KASCADE-Grande experiment. Rather it is focused on three aspects of current interests illustrating the advantages of a multi-detector facility. Results on the analysis of individual energy spectra of primary mass groups around the knee obtained by unfolding the shower size measurements of KASCADE with the help of the new hadronic interaction model EPOS and the all-particle energy spectrum at higher energies obtained by Grande measurements will be discussed. As KASCADE-Grande serves also as host of the LOPES radio detection experiment where both experiments measure the same showers, special emphasis will be given in comparing the characteristics and feasibility of both techniques in estimating the main parameters of high-energy primary cosmic rays: energy, composition, and arrival direction.

  13. BtL. The bioliq {sup registered} process at KIT

    Energy Technology Data Exchange (ETDEWEB)

    Kolb, T. [Karlsruher Institut fuer Technologie (KIT), Engler-Bunte-Institut, Karlsruhe (Germany). Div. Fuel Chemistry and Technology (EBI ceb); Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Technical Chemistry (ITC); Eberhard, M.; Leibold, H.; Seifert, H.; Zimmerlin, B. [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Technical Chemistry (ITC); Dahmen, N.; Sauer, J. [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Inst. of Catalysis Research and Technology (IKFT); Neuberger, M. [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Project Management and Quality Assurance Service Unit (PMQ)

    2013-11-01

    Synthetic fuels from biomass may contribute to the future motor fuel supply to a considerable extent. To overcome the logistical hurdles connected with the industrial use of large quantities of biomass, the de-central/central bioliq {sup registered} concept has been developed. It is based on a regional pre-treatment of biomass for energy densification by fast pyrolysis. The intermediate referred to as biosyncrude enables an economic long-range transportation. Collected from a number of those pyrolysis plants, the biosyncrude is converted into synthesis gas, which is cleaned, conditioned and further converted to fuels or chemicals in a central plant of reasonable industrial size. Gasification is performed in an entrained flow gasifier at pressures adjusted to the subsequent chemical synthesis. For increased fuel flexibility and utilization of ash rich feed materials, the gasifier is equipped with a cooling screen operated in slagging mode. At the Karlsruhe Institute of Technology, KIT, a bioliq {sup registered} pilot plant has been erected for demonstration of the whole process chain. The 2 MW{sub th} fast pyrolysis plant is in operation since 2009; the 5 MW{sub th} / 80 bars gasifier, the hot gas cleaning section and the gasoline synthesis via DME were erected in 2011/12. Commissioning of that plant complex was completed in 2013. (orig.)

  14. Energy system analysis. Proceedings; Energiesystemanalyse. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    Moest, Dominik [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (DE). Inst. fuer Technikfolgen-Abschaetzung und Systemanalyse (ITAS); Fichtner, Wolf; Grunwald, Armin (eds.) [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Industriebetriebslehre und Industrielle Produktion

    2009-07-01

    The proceedings on energy system analysis include the following contributions: energy system analysis in the KIT (Karlsruhe Institute of Technology) center energy; introduction energy system analysis; comparison of future energy - but how? models and scenarios - the scientific practice of energy system analysis; development of energy markets until 2050 - an overview on selected scenarios; system dynamics model of the German electricity market - model development and application in the company's practice; energy scenarios for megacities - concept and first results of the HGF project ''risk habitat megacity''; optimization of urban energy systems; agent-based simulation for market power measurement - an analysis for the German electricity market; study of the use of agent-based models for decentralized energy system simulation for the case of Guadeloupe; on the analysis of effects of fuel-dependent benchmarks of electricity generation costs and investment decisions in electric power industry; cost potential curves for on-shore wind power generation in the EU based on a geographic information system; straw and forest residues - results of a site analysis for the bioliq concept; consequential LCA (life cycle analysis) - a necessary development of LCA? - case discussion concerning lignocellulose-based bioethanol.

  15. Frankfurt - Paris in less than three hours; Frankfurt (Main) - Paris unter 3 Stunden.

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, S.

    2008-03-15

    The European character of the French TGV Est Line will be demonstrated when the 100 km long second phase Baudrecourt (near Metz) - Vendenheim (near Strasbourg) is going to be completed. Connecting with Germany this effect could be strengthened, if a bypass route northerly from Strasbourg could be realized. The French and German Railways already together checked appropriate solutions in 1988. They came to realize that a layout of the crossing border high speed line using the former railway bridge near Wintersdorf would demonstrate the best cost benefit factor among several discussed solutions. Together with the planned new high speed line between Frankfurt (Main) and Mannheim a travel time of less than 3 hours between Frankfurt (M) and Paris could be achieved. Also Strasbourg could benefit from this solution, if in the future high speed trains from South France via Lyon - Strasbourg to Frankfurt (M) coming from the TGV Rhine-Rhone high speed line could use this new cross border high speed connection. Further cross border high speed trains from Luxembourg (in the far future from Brussels - Namur) via Metz to Karlsruhe - Stuttgart and Frankfurt (M) could additionally use this new connection providing for the first time attractive travel times from these cities to South West Germany. (orig.)

  16. Ginkgo biloba extract in the treatment of tinnitus: a systematic review

    Directory of Open Access Journals (Sweden)

    von Boetticher A

    2011-07-01

    Full Text Available Alexander von BoetticherEar, Nose and Throat Surgery, Lueneburg, GermanyAbstract: Tinnitus is a symptom frequently encountered by ear, nose, and throat practitioners. A causal treatment is rarely possible, and drug and nondrug treatment options are limited. One of the frequently prescribed treatments is Ginkgo biloba extract. Therefore, randomized, placebo-controlled clinical trials of Ginkgo biloba extract preparations were searched for and reviewed systematically. There is evidence of efficacy for the standardized extract, EGb 761® (Dr Willmar Schwabe GmbH & Co KG Pharmaceuticals, Karlsruhe, Germany, in the treatment of tinnitus from three trials in patients in whom tinnitus was the primary complaint. Supportive evidence comes from a further five trials in patients with age-associated cognitive impairment or dementia in whom tinnitus was present as a concomitant symptom. As yet, the efficacy of other ginkgo preparations has not been proven, which does not necessarily indicate ineffectiveness, but may be due to flawed clinical trials. In conclusion, EGb 761®, a standardized Ginkgo biloba extract, is an evidence-based treatment option in tinnitus.Keywords: tinnitus, Ginkgo biloba, EGb 761®, systematic review

  17. Conceptual design of a helium heater for high temperature applications

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Xue Zhou, E-mail: jin@kit.edu; Chen, Yuming; Ghidersa, Bradut-Eugen

    2014-10-15

    Highlights: •A special design of heater with two vessels is introduced for the operation at 10 MPa and 800 °C. •The additional coupling between the cold leg and the hot leg of the loop due to the heater design has an impact on the loop energy budget. •Reducing the heat transfer between the two flow channels inside the heater by means of a helium gap in the inlet nozzle is proven to be effective. -- Abstract: The Karlsruhe Advanced Technologies Helium Loop (KATHELO) has been designed for testing divertor modules as well as qualifying materials for high heat flux, high temperature (up to 800 °C) and high pressure (10 MPa) applications. The test section inlet temperature level is controlled using a process electrical heater. To cope with the extreme operating conditions, a special design of this unit has been proposed. In this paper the conceptual design of the unit will be presented and the impact of the coupling between the cold and hot helium gas on the overall efficiency of the loop will be investigated. The detailed thermal-hydraulic analysis of the feed through of the hot helium into the low temperature pressure vessel using ANSYS CFX will be presented. The impact of the design choices on the overall energy budget of the loop will be analyzed using RELAP5-3D.

  18. Thermal–hydraulic system study of the HELOKA-LP helium loop using RELAP5-3D code

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Xue Zhou, E-mail: jin@kit.edu; Schlindwein, Georg; Schlenker, Markus; Ghidersa, Bradut-Eugen; Chen, Yuming; Arbeiter, Frederik

    2013-10-15

    Highlights: • Thermal–hydraulic system study for the HELOKA-LP using RELAP5-3D. • Validation of various experiments with corresponding simulations, and good comparison between the experiments and the simulations. • Simulation of the two most heated compartments of IFMIF HFTM in the modeled helium loop and prediction of the loop dynamic. -- Abstract: The thermal–hydraulic system analyses for the HELOKA-LP (Helium Loop Karlsruhe – Low Pressure) facility are presented. Typical operation ranges for the test section are mass flow rate between 12 and 120 g/s, inlet temperature between 10 and 250 °C and pressure level between 0.3 and 0.6 MPa. An orifice is used for the loop testing, for which different experiments are validated with appropriate simulations. Afterwards instead of the orifice, two most heated compartments of IFMIF (International Fusion Materials Irradiation Facility) HFTM (high flux test module) are simulated in HELOKA-LP. Using the system code REALP5-3D components in the loop are modeled as well as the main control strategy. With this model the loop dynamics in conditions relevant for the HFTM operation are analyzed and the thermal time constant of the compartment is estimated.

  19. HELOKA-HP thermal-hydraulic model validation and calibration

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Xue Zhou; Ghidersa, Bradut-Eugen; Badea, Aurelian Florin

    2016-11-01

    Highlights: • The electrical heater in HELOKA-HP has been modeled with RELAP5-3D using experimental data as input. • The model has been validated using novel techniques for assimilating experimental data and the representative model parameters with BEST-EST. • The methodology is successfully used for reducing the model uncertainties and provides a quantitative measure of the consistency between the experimental data and the model. - Abstract: The Helium Loop Karlsruhe High Pressure (HELOKA-HP) is an experimental facility for the testing of various helium-cooled components at high temperature (500 °C) and high pressure (8 MPa) for nuclear fusion applications. For modeling the loop thermal dynamics, a thermal-hydraulic model has been created using the system code RELAP5-3D. Recently, new experimental data covering the behavior of the loop components under relevant operational conditions have been made available giving the possibility of validating and calibrating the existing models in order to reduce the uncertainties of the simulated responses. This paper presents an example where such process has been applied for the HELOKA electrical heater model. Using novel techniques for assimilating experimental data, implemented in the computational module BEST-EST, the representative parameters of the model have been calibrated.

  20. The source of monoenergetic electrons for the monitoring of spectrometer in the KATRIN neutrino experiment

    CERN Document Server

    Slezák, Martin

    The international project KATRIN (KArlsruhe TRItium Neutrino experiment) is a next-generation tritium $\\beta$-decay experiment. It is designed to measure the electron anti-neutrino mass by means of a unique electron spectrometer with sensitivity of 0.2 eV/c$^2$. This is an improvement of one order of magnitude over the last results. Important part of the measurement will rest in continuous precise monitoring of high voltage of the KATRIN main spectrometer. The monitoring will be done by means of conversion electrons emitted from a solid source based on $^{83}$Rb decay. Properties of several of these sources are studied in this thesis by means of the semiconductor $\\gamma$-ray spectroscopy. Firstly, measurement of precise energy of the 9.4 keV nuclear transition observed in $^{83}$Rb decay, from which the energy of conversion electrons is derived, is reported. Secondly, measurement of activity distribution of the solid sources by means of the Timepix detector is described. Finally, a report on measurement of r...

  1. Resolving the Reactor Neutrino Anomaly with the KATRIN Neutrino Experiment

    CERN Document Server

    Barrett, J A Formaggio J

    2011-01-01

    The KArlsruhe TRItium Neutrino experiment (KATRIN) combines an ultra-luminous molecular tritium source with an integrating high-resolution spectrometer to gain sensitivity to the absolute mass scale of neutrinos. The projected sensitivity of the experiment on the electron neutrino mass is 200 meV at 90% C.L. With such unprecedented resolution, the experiment is also sensitive to physics beyond the Standard Model, particularly to the existence of additional sterile neutrinos at the eV mass scale. A recent analysis of available reactor data appears to favor the existence of such such a sterile neutrino with a mass splitting of $|\\Delta m_{\\rm sterile}|^2 \\ge 1.5$ eV$^2$ and mixing strength of $\\sin^2{2\\theta_{\\rm sterile}} = 0.17\\pm 0.08$ at 95% C.L. Upcoming tritium beta decay experiments should be able to rule out or confirm the presence of the new phenomenon for a substantial fraction of the allowed parameter space.

  2. Analysis of KATRIN data using Bayesian inference

    CERN Document Server

    Riis, Anna Sejersen; Weinheimer, Christian

    2011-01-01

    The KATRIN (KArlsruhe TRItium Neutrino) experiment will be analyzing the tritium beta-spectrum to determine the mass of the neutrino with a sensitivity of 0.2 eV (90% C.L.). This approach to a measurement of the absolute value of the neutrino mass relies only on the principle of energy conservation and can in some sense be called model-independent as compared to cosmology and neutrino-less double beta decay. However by model independent we only mean in case of the minimal extension of the standard model. One should therefore also analyse the data for non-standard couplings to e.g. righthanded or sterile neutrinos. As an alternative to the frequentist minimization methods used in the analysis of the earlier experiments in Mainz and Troitsk we have been investigating Markov Chain Monte Carlo (MCMC) methods which are very well suited for probing multi-parameter spaces. We found that implementing the KATRIN chi squared function in the COSMOMC package - an MCMC code using Bayesian parameter inference - solved the ...

  3. The Efficient Use of Vector Computers with Emphasis on Computational Fluid Dynamics : a GAMM-Workshop

    CERN Document Server

    Gentzsch, Wolfgang

    1986-01-01

    The GAMM Committee for Numerical Methods in Fluid Mechanics organizes workshops which should bring together experts of a narrow field of computational fluid dynamics (CFD) to exchange ideas and experiences in order to speed-up the development in this field. In this sense it was suggested that a workshop should treat the solution of CFD problems on vector computers. Thus we organized a workshop with the title "The efficient use of vector computers with emphasis on computational fluid dynamics". The workshop took place at the Computing Centre of the University of Karlsruhe, March 13-15,1985. The participation had been restricted to 22 people of 7 countries. 18 papers have been presented. In the announcement of the workshop we wrote: "Fluid mechanics has actively stimulated the development of superfast vector computers like the CRAY's or CYBER 205. Now these computers on their turn stimulate the development of new algorithms which result in a high degree of vectorization (sca1ar/vectorized execution-time). But w...

  4. Control of radio-iodine at the German reprocessing plant WAK during operation and after shutdown

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, F.J.; Herrmann, B.; Kuhn, K.D. [Wiederaufarbeitungsanlage Karlsruhe (Germany)] [and others

    1997-08-01

    During 20 years of operation 207 metric tons of oxide fuel from nuclear power reactors with 19 kg of iodine-129 had been reprocessed in the WAK plant near Karlsruhe. In January 1991 the WAK Plant was shut down. During operation iodine releases of the plant as well as the iodine distribution over the liquid and gaseous process streams had been determined. Most of the iodine is evolved into the dissolver off-gas in volatile form. The remainder is dispersed over many aqueous, organic and especially gaseous process and waste streams. After shut down of the plant in January 1991, iodine measurements in the off-gas streams have been continued up to now. Whereas the iodine-129 concentration in the dissolver off-gas dropped during six months after shutdown by three orders of magnitude, the iodine concentrations in the vessel ventilation system of the PUREX process and the cell vent system decreased only by a factor of 10 during the same period. Iodine-129 releases of the liquid high active waste storage tanks did not decrease distinctly. The removal efficiencies of the silver impregnated iodine filters in the different off-gas streams of the WAK plant depend on the iodine concentration in the off-gas. The reason of the observed dependence of the DF on the iodine-129 concentration might be due to the presence of organic iodine compounds which are difficult to remove. 13 refs., 3 figs.

  5. New C$_{6}$D$_{6}$ detectors: reduced neutron sensitivity and improved safety

    CERN Document Server

    Mastinu, Pierfrancesco; Berthoumieux, Eric; Cano-Ott, Daniel; Gramegna, F; Guerrero, Carlos; Massimi, Cristian; Milazzo, Paolo Maria; Mingrone, Federica; Praena, Javier; Prete, G; García, Aczel Regino

    2013-01-01

    During the 2011 data measurement campaign at n_TOF, the liquid scintillator detectors developed at FZK-Karlsruhe (hereafter named K6D6, [1]) and used with success along 10 years have shown ageing problems, mainly related to liquid leakage. The mould used to produce the carbon fiber structure, containing the liquid and the detection elements, was not available anymore and the technician involved in its construction was retired. Once decided to proceed to the production of new detectors (L6D6 in the following) two major items have been identified: - The detector setup must be able to work in the new class A experimental area (safety requirements advise to avoid the use of the old K6D6 in this area). - If possible, it is useful to reduce the neutron sensitivity, with the aim to have a liquid scintillator detector with very low neutron sensitivity (improving the already high performing K6D6). [1] R.Plag et al., NIM A496 (2003) 425

  6. Food irradiation - pros and cons

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    The use of ionising radiation for food preservation is a much-disputed topic, both among experts and among consumers. Pros and cons of this issue were discussed in detail at the consumers' forum. Professor Dr. Johannes Friedrich Diehl, Director of the Institute for Biochemistry of the Food Research Centre, Karlsruhe, is a well-known supporter of the new method of food preservation; he sees advantages in the radiopreservation of food because, for example, losses due to inedibility are reduced, the danger of salmonellosis is decreased, just as the use of chemicals. He thinks this method to be without danger to health, shown by many years of experience. Opponents to food irradiation like Prof. Dr. Konrad Pfeilsticker, Professor for food science and food chemistry at the Bonn University deem the method to be unnecessary and raise the problem of qualitative changes caused in the food. In the course of the discussions, the pros and cons seemed to balance each other out.

  7. A New Coupled CFD/Neutron Kinetics System for High Fidelity Simulations of LWR Core Phenomena: Proof of Concept

    Directory of Open Access Journals (Sweden)

    Jorge Pérez Mañes

    2014-01-01

    Full Text Available The Institute for Neutron Physics and Reactor Technology (INR at the Karlsruhe Institute of Technology (KIT is investigating the application of the meso- and microscale analysis for the prediction of local safety parameters for light water reactors (LWR. By applying codes like CFD (computational fluid dynamics and SP3 (simplified transport reactor dynamics it is possible to describe the underlying phenomena in a more accurate manner than by the nodal/coarse 1D thermal hydraulic coupled codes. By coupling the transport (SP3 based neutron kinetics (NK code DYN3D with NEPTUNE-CFD, within a parallel MPI-environment, the NHESDYN platform is created. The newly developed system will allow high fidelity simulations of LWR fuel assemblies and cores. In NHESDYN, a heat conduction solver, SYRTHES, is coupled to NEPTUNE-CFD. The driver module of NHESDYN controls the sequence of execution of the solvers as well as the communication between the solvers based on MPI. In this paper, the main features of NHESDYN are discussed and the proof of the concept is done by solving a single pin problem. The prediction capability of NHESDYN is demonstrated by a code-to-code comparison with the DYNSUB code. Finally, the future developments and validation efforts are highlighted.

  8. In situ treatment of VOCs by recirculation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Siegrist, R.L.; Webb, O.F.; Ally, M.R.; Sanford, W.E. [Oak Ridge National Lab., TN (US); Kearl, P.M.; Zutman, J.L. [Oak Ridge National Lab., Grand Junction, CO (US)

    1993-06-01

    The project described herein was conducted by Oak Ridge National Laboratory (ORNL) to identify processes and technologies developed in Germany that appeared to have near-term potential for enhancing the cleanup of volatile organic compound (VOC) contaminated soil and groundwater at DOE sites. Members of the ORNL research team identified and evaluated selected German technologies developed at or in association with the University of Karlsruhe (UoK) for in situ treatment of VOC contaminated soils and groundwater. Project activities included contacts with researchers within three departments of the UoK (i.e., Applied Geology, Hydromechanics, and Soil and Foundation Engineering) during fall 1991 and subsequent visits to UoK and private industry collaborators during February 1992. Subsequent analyses consisted of engineering computations, groundwater flow modeling, and treatment process modeling. As a result of these project efforts, two processes were identified as having near-term potential for DOE: (1) the vacuum vaporizer well/groundwater recirculation well and (2) the porous pipe/horizontal well. This document was prepared to summarize the methods and results of the assessment activities completed during the initial year of the project. The project is still ongoing, so not all facets of the effort are completely described in this document. Recommendations for laboratory and field experiments are provided.

  9. In situ treatment of VOCs by recirculation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Webb, O.F.; Siegrist, R.L.; Ally, M.R.; Sanford, W.E. [Oak Ridge National Lab., TN (United States); Kearl, P.M.; Zutman, J.L. [Oak Ridge National Lab., Grand Junction, CO (United States). Environmental Science Div.

    1994-06-01

    Confronted with contaminated land from the world wars and the postwar industrialization period, German researchers and practicing professionals have worked to develop processes for effective environmental restoration. This presentation documents efforts by Oak Ridge National Laboratory (ORNL) researchers to (1) identify collaborators and German technologies exhibiting near-term potential for clean-up of volatile organic contaminated soil and groundwater at Department of Energy sites, (2) critically assess performance, and (3) inform interested agencies. The project was limited to identification and preliminary evaluation and included engineering computations, groundwater flow modeling, and treatment process modeling. Two processes were identified: (1) the vacuum vaporizer well/groundwater recirculation well and (2) the porous pipe/horizontal well (PP/HW). Both technologies induce a recirculation flow field in the aquifer and enable simultaneous down hole treatment of the aquifer and vadose zone. University of Karlsruhe researchers have demonstrated the UVB/GZB technology in shallow aquifers with moderately high saturated thickness and hydraulic conductivities. The PP/HW technology offers potential for VOC treatment in sites with thin aquifers or heterogeneities. This paper describes identified German technologies and includes critical evaluations of well performance, associated treatment processes, operating variables, and aquifer-well interactions.

  10. Citybem: AN Open Source Implementation and Validation of Monthly Heating and Cooling Energy Needs for 3d Buildings in Cities

    Science.gov (United States)

    Murshed, S. M.; Picard, S.; Koch, A.

    2017-10-01

    Cities play an important role in reaching local and global targets on energy efficiency and the reduction of greenhouse gas emissions. In order to determine the potential of energy efficiency in the building sector new planning instruments are required that allow depicting the complete building stock on the one hand and investigate detailed measures on the other hand. To pursue this objective, the ISO 13970:2008 monthly heating and cooling energy model is implemented using an open source based software architecture (CityBEM), in connection with data from 3D city models in the CityGML standard (LOD2). Input parameters such as the building geometry, typology and energy characteristics have been associated with the 3D data. The model has been applied to several urban districts with different numbers of buildings in the city of Karlsruhe. In order to test the accuracy of the implemented model and its robustness, a 3-step validation has been conducted. The comparison of simulation results with results based on a TRNSYS simulation showed acceptable results for the studied application cases. The proposed approach can help urban decision makers to perform a city or district wide analysis of the building energy need which can be further used to prepare future scenarios or renovation plans to support decision making.

  11. Airborne SAR on circular trajectories to reduce layover and shadow effects of urban scenes

    Science.gov (United States)

    Palm, Stephan; Sommer, Rainer; Pohl, Nils; Stilla, Uwe

    2016-10-01

    Circular synthetic aperture radar (CSAR) can provide a full aspect coverage on interesting scenes in one run. Over the city of Karlsruhe a Ka-band dataset was generated in CSAR mode. The data was focused using subapertures in a step of 1.5°, each SAR image representing the scene from a slightly different aspect. The potential of non-coherent fusion of full aspect coverage to reveal small targets was demonstrated. By a manual selection of the viewing angle, parking cars next to high buildings could be revealed and a full view on selected targets with reduced shadow and overlay effects was shown. We studied the effect of varying aspects on the focused image pixels and developed a first metric to automatically select the best viewing angle to a local scene. Areas containing ground information like grass or asphalt and which are not hidden between high objects could be identified and used to deliver a good aspect view on neighboring areas which suffer from shadowing effects.

  12. Decommissioning technologies, including recent developments and special features of the dismantling of nuclear research and prototype facilities

    Energy Technology Data Exchange (ETDEWEB)

    Bach, W.; Versemann, R.; Wilk, P. [Hannover Univ. (DE). Inst. fuer Werkstoffkunde, Garbsen (Germany); Pfeifer, W.; Valencia, L.; Eisenmann, B. [Forschungszentrum Karlsruhe (Germany). Geschaeftsbereich Stilllegung Nuklearer Anlagen; Hammer, G. [IABG Industrieanlagen Betriebsgeselslchaft mbH, Ottobrunn (Germany)

    2005-02-01

    A variety of technologies is available for the decontamination and dismantling of nuclear facilities. All over the world, these technologies as well as conditioning processes of decommissioning waste are further developed. So far, they have been mainly applied to the dismantling of research and prototype facilities. Dismantling of reactors of higher power has started with the nuclear power plants of Greifswald and Wuergassen among others. The present paper shall present the state of the art of decontamination and dismantling techniques as well as of post-treatment processes of radioactive decommissioning waste. From the technical point of view, the most complex step is the remote dismantling of activated and highly contaminated components. The prototype facilities of Forschungszentrum Karlsruhe, which are currently being dismantled, cover all types of plants. Their status of dismantling and the experience gained from using decommissioning technologies that are also suited for power facilities shall be illustrated. Further developments and adaptations of individual techniques, e.g. thermal and mechanical cutting methods, as well as of the complete systems technology, including carrier system, manipulator system, and tools, are reasonable and indispensable for managing the variety of dismantling tasks and, not least, for reducing their operation times and costs of use. (orig.)

  13. Radiation damage effects on CMS sensors quality assurance and irradiation tests

    CERN Document Server

    Furgeri, Alexander J; de Boer, Wim; Forton, E; Freudenstein, S; Hartmann, F

    2004-01-01

    The Large Hadron Collider (LHC) at the Centre Europeenne pour la Recherche Nucleaire (CERN), Geneva, Switzerland, is a proton-proton collider with a luminosity of 10**3**4/cm**2s and will be working for ten years (starting in 2007). The Compact Muon Solenoid (CMS) will be one of the four general-purpose detectors. The CMS tracker consists of ten barrel layers, plus 2 multiplied by 9 end cap discs, which amounts to a total of 24 328 silicon sensors with a total area of 206 m**2 silicon, covering a pseudorapidity of vertical bar eta; vertical bar less than approximately equals 2.5. For the sensors close to the beam pipe, fluences of 1.6 center dot 10**1**4n//1 MeV/cm**2 are expected over the ten-year lifetime. To guarantee the functionality of the single-side silicon sensors during the runtime of the LHC, quality assurance was developed. In the two Irradiation Qualification Centers (IQCs) in Karlsruhe, Germany, and Louvain-la-Neuve, Belgium, a fraction of 1% of the sensors are electrically qualified. In Karlsru...

  14. Experiences with a pre-series of Micro Strip Gas Counters with Gas Electron Multipliers for high rate applications

    CERN Document Server

    Zander, Anette

    2001-01-01

    Micro strip gas chambers (MSGCs) are promising candidates for large scale applications. They combine a good spatial resolution with high granularity and low cost. As a possible extension of the plain MSGC, a Gas Electron Multiplier (GEM) foil may be implemented into the detector in order to increase the safety of operation. It was planned to equip the outer part of the tracking system of the Compact Muon Solenoid (CMS) experiment at the future Large Hadron Collider (LHC) at the Centre de Recherche Nucleaire (CERN) with MSGCs. In the barrel part of the tracker, plain MSGCs were to be used. For the forward part, the MSGC+GEM technology was envisaged. This thesis describes the assembly and test of a pre-series of 18 fully functional MSGC+GEM forward detector modules to determine their radiation hardness and their readiness for mass production. Five of the modules were built at Aachen, thirteen more at the 'Institut für Experimentelle Kernphysik' in Karlsruhe. For the pre-series, two different types of GEM foils...

  15. High-accuracy mass spectrometry for fundamental studies.

    Science.gov (United States)

    Kluge, H-Jürgen

    2010-01-01

    Mass spectrometry for fundamental studies in metrology and atomic, nuclear and particle physics requires extreme sensitivity and efficiency as well as ultimate resolving power and accuracy. An overview will be given on the global status of high-accuracy mass spectrometry for fundamental physics and metrology. Three quite different examples of modern mass spectrometric experiments in physics are presented: (i) the retardation spectrometer KATRIN at the Forschungszentrum Karlsruhe, employing electrostatic filtering in combination with magnetic-adiabatic collimation-the biggest mass spectrometer for determining the smallest mass, i.e. the mass of the electron anti-neutrino, (ii) the Experimental Cooler-Storage Ring at GSI-a mass spectrometer of medium size, relative to other accelerators, for determining medium-heavy masses and (iii) the Penning trap facility, SHIPTRAP, at GSI-the smallest mass spectrometer for determining the heaviest masses, those of super-heavy elements. Finally, a short view into the future will address the GSI project HITRAP at GSI for fundamental studies with highly-charged ions.

  16. Radon in schools. An elevation measurement in schools in Baden-Wuerttemberg; Radon in Schulen. Eine Erhebungsmessung in Baden-Wuerttemberg

    Energy Technology Data Exchange (ETDEWEB)

    Fesenbeck, I.; Naber, C.; Frank, G.; Wilhelm, C.; Schaller, M. [Karlsruher Institut fuer Technologie (Germany). Sicherheit und Umwelt

    2016-07-01

    With an effective dose of about 1.1 mSv per year, radon and its secondary products have the biggest share in the population's natural radiation exposure. For implementation of the new EU directive 2013/59/EURATOM dated January 17, 2014, it is now planned to adapt the limit values of the Radiation Protection Ordinance and to extend the scope of validity in the EU member states. The ''Radon at Schools'' project is to cover an area-wide survey of radon concentrations in room air of schools in Baden-Wuerttemberg. Potential hazards caused by radon-222 and secondary products of radon are to be studied. For the project, 1600 schools were selected and requested to participate by an information letter. Half of the schools is distributed over the entire area of Baden-Wuerttemberg. The other half is located in areas of increased radon potential. Radon concentration in room air is determined passively by Karlsruhe radon exposimeters. Subsequently, active radon measurements will be made at conspicuous schools and information events will be offered for municipalities, teachers, interested parents, and pupils.

  17. Biomass co-firing in coal power plants in the Netherlands. Effects on performance and air pollutant emissions

    Energy Technology Data Exchange (ETDEWEB)

    Smekens, K. [ECN Policy Studies, Petten (Netherlands)

    2013-07-15

    This note is intended for use in the UNECE (United Nations Economic Commission for Europe)-EGTEI (Expert Group on Techno-Economic Issues) work related to cost of emission reduction technologies for large combustion plants (LCP). This work is coordinated by KIT (Karlsruhe) and CITEPA (Paris). As the Netherlands is considered to be a valuable country for data regarding biomass co-firing in large coal fired power plants, EGTEI expressed its interest on data ECN has available. For this purpose, based on available data from annual environmental reports of power plants, ECN has looked into the relationship between the percentage of co -firing and the plant performance. It should be noted that the evaluation has been based on annual data, not on real-time simultaneous measurements of the different parameters mentioned in this note. Cumulative annual data give no insights in e.g. the effects of the load factor, of start-ups or shut-downs, seasonal circumstances, fuel qualities, etc. Therefore, the findings in this report should be treated with due care and not be generalised.

  18. Irradiation studies of DEPFET-like devices with X-rays

    Energy Technology Data Exchange (ETDEWEB)

    Petrovics, Stefan; Ritter, Andreas; Moser, Hans-Guenther; Ninkovic, Jelena; Richter, Rainer; Andricek, Ladislav; Koffmane, Christian; Wassatsch, Andreas [Max-Planck-Institut fuer Physik, Halbleiterlabor (Germany)

    2012-07-01

    The upcoming upgrade of the Belle-Experiment at KEK will impose new challenges in radiation hardness for the utilized DEPFET-devices (Depleted p-channel Field Effect Transistor). The upgrade in Belle II will result in an increased luminosity and therefore in a significantly higher radiation dose up to 1 Mrad (10 kGy) per year which the DEPFET-devices need to withstand. Radiation damage through ionizing and non-ionizing radiation is possible. In the case of ionizing radiation positive charge carriers are created that will be collected at the interface between silicon and silicon dioxide. The creation of these charge carriers will result in a threshold voltage shift of the deployed transistors. In order for the detector to remain functional, the operating voltage needs to be adjusted depending on the threshold voltage shift. Therefore a detailed characterization of the voltage shift due to the radiation damage of ionizing radiation is crucial for the correct predicament of the detector operation. The test devices employed for the irradiation studies simulated the behavior at the Si-SiO{sub 2} interface of the DEPFET. The irradiation was executed at the X-ray facility at KIT (Karlsruhe Institute of Technology) with maximum photon energy of 60 keV.

  19. Prácticas de alta tensión para fines didácticos en ingeniería

    Directory of Open Access Journals (Sweden)

    Francisco Román Campos

    2010-11-01

    Full Text Available Se condensan en este articulo algunas ideas acerca de las posibles prácticas de alta tensión que pueden ser implementadas en la carrera de Ingeniería Eléctrica, con el fin de dar cumplimiento a sus objetivos instruccionales. Se presentan doce prácticas docentes que pueden ir implementándose poco a poco, de acuerdo a los desarrollos que semestre a semestre se logren en este campo. Se incluye para cada práctica docente el objetivo general, el montaje básico y los circuitos de medida y algunos comentarlos acerca de las partes que pueden ser construidas localmente. La inspiración fundamental de este trabajo es la certeza de que la construcción y dotación de casi la totalidad de los dispositivos puede hacerse con ayuda de las empresas locales de electricidad, los fabricantes de equipo y los profesores con estudiantes, mediante la dirección de proyectos de grado. Las ideas expresadas en este artículo son fruto de las experiencias adquiridas en los laboratorios de alta tensión de las universidades Nacional de Bogotá y Fridericiana de Karlsruhe, dentro de los programas del Grupo de Investigación en Alta Tensión -GIAT - de la Universidad Nacional.

  20. Powerful demolition techniques - plasma fusion cutting, contact arc metal cutting (CAMC), and contact arc metal grinding (CAMG); Leistungsfaehige Rueckbautechnologien - Plasmaschmelzschneiden, Kontakt-Lichtbogen-Metall-Schneiden (CAMC) und Kontakt-Lichtbogen-Metall-Trennschleifen (CAMG)

    Energy Technology Data Exchange (ETDEWEB)

    Bach, F.W.; Kremer, G.; Ruemenapp, T. [Leibniz Univ. Hannover, Inst. fuer Werkstoffkunde, Garbsen (Germany)

    2006-10-15

    One of the most complicated steps in the demolition of nuclear power plants is the disassembly of radiologically burdened large components. Most of this work must be performed remotely and under a cover of water. Moreover, dimensions, structures, and locations pose problems. Various techniques of disassembly are available which have specific pros and cons. Thermal cutting techniques, i.e. plasma fusion cutting, contact arc metal cutting (CAMC), and contact arc metal grinding (CAMG), can be used with comparatively simple handling systems even for large material thicknesses and complex geometries. These thermal cutting techniques have been advanced considerably at the Institute for Materials Technology of the University of Hanover in recent years. In plasma fusion cutting, the workpiece is molten, partly evaporated, and the melt is blown out of the kerf by the gas jet. CAMC and CAMG are based on the thermal abrasion of electrically conducting materials under water by means of repeated non-steady short-circuit high-current arcs resulting from contacts between the electrode and the workpiece. Unlike plasma or laser beam cutting, hollow structures and sandwich structures pose no problems. The performance capability of plasma fusion cutting and contact arc metal cutting has been demonstrated impressively in the disassembly of reactor internals of the Karlsruhe multi-purpose research reactor (MZFR). (orig.)

  1. News from the Library: Two new online services available at CERN: thank you for your feedback!

    CERN Multimedia

    CERN Library

    2012-01-01

    The Library has activated two different new online services, as a result of very successful trial periods and thanks to your positive feedback and strong support: PressDisplay and Nucleonica.   PressDisplay is an online portal where one can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published. Le Monde, International Herald Tribune and many more titles are available in their original layout including text and images. Thanks to RSS feeds, users can directly receive news from their favorite newspapers, but articles can also be printed and sent via email. Based on the very positive feedback we got from the community, the CERN Library has activated a one-year subscription to PressDisplay, and a wealth of information is now available at everyone's fingertips at CERN. In addition to that, the latest Library news about Nucleonica, the nuclide and isotope database derived from the Karlsruhe Nuclide Chart, generated so much interest ...

  2. Homogeneous nucleation rates of nitric acid dihydrate (NAD at simulated stratospheric conditions – Part II: Modelling

    Directory of Open Access Journals (Sweden)

    O. Möhler

    2006-01-01

    Full Text Available Activation energies ΔGact for the nucleation of nitric acid dihydrate (NAD in supercooled binary HNO3/H2O solution droplets were calculated from volume-based nucleation rate measurements using the AIDA (Aerosol, Interactions, and Dynamics in the Atmosphere aerosol chamber of Forschungszentrum Karlsruhe. The experimental conditions covered temperatures T between 192 and 197 K, NAD saturation ratios SNAD between 7 and 10, and nitric acid molar fractions of the nucleating sub-micron sized droplets between 0.26 and 0.28. Based on classical nucleation theory, a new parameterisation for ΔGact=A×(T ln SNAD−2+B is fitted to the experimental data with A=2.5×106 kcal K2 mol−1 and B=11.2−0.1(T−192 kcal mol−1. A and B were chosen to also achieve good agreement with literature data of ΔGact. The parameter A implies, for the temperature and composition range of our analysis, a mean interface tension σsl=51 cal mol−1 cm−2 between the growing NAD germ and the supercooled solution. A slight temperature dependence of the diffusion activation energy is represented by the parameter B. Investigations with a detailed microphysical process model showed that literature formulations of volume-based (Salcedo et al., 2001 and surface-based (Tabazadeh et al., 2002 nucleation rates significantly overestimate NAD formation rates when applied to the conditions of our experiments.

  3. Ideology, Family Policy, Production, and (ReEducation: Literary Treatment of Abortion in the GDR of the Early 1980s

    Directory of Open Access Journals (Sweden)

    Heinz Bulmahn

    1997-06-01

    Full Text Available The decision by the Constitutional Court in Karlsruhe of placing restrictions on the right to an abortion will profoundly affect German women's right to choose. This decision is a culmination of efforts to errode the right to choose for West as well as East German women. In the former GDR, even though liberal abortion laws allowed women access to free abortions, for ideological reasons, the government devised policies that discouraged abortions as a means of birth control. This policy becomes particularly apparent in the early 1980s when the East German government, confronted with a declining birth rate, faced the dilemma of how to leave the existing liberal abortion law intact while discouraging women from aborting their fetuses. To accomplish this task officials persuaded writers to produce literary works that promoted a three-child family policy where abortion was relegated to an inappropriate option. The article analyzes several literary works written in the early 1980s within the context of this renewed effort to encourage women to produce more children at the expense of their personal choice, and concludes that, in spite of the liberal abortion rights in the former GDR, the conditions for exercising these rights proved to be far less favorable.

  4. Coupled exposure to ingredients of cosmetic products: III. Ultraviolet filters.

    Science.gov (United States)

    Uter, Wolfgang; Gonçalo, Margarida; Yazar, Kerem; Kratz, Eva-Maria; Mildau, Gerd; Lidén, Carola

    2014-09-01

    The use of cosmetics exposes consumers to mixtures of ingredients, many of which are potential allergens. Ultraviolet (UV) filters are used not just in sunscreens, but also in other products. Many UV filters are known contact allergens and photoallergens. To examine the pattern of co-exposure to UV filters in cosmetics. A survey of products marketed in Germany, conducted in 2006-2009 by the Chemical and Veterinary Investigation Office in Karlsruhe, identified 4447 products (of all 5667 cosmetic products examined) (i) that were categorizable according to Annex I to the Cosmetics Directive, and (ii) with information on the presence of UV filters or zinc oxide. The occurrence and co-occurrence of UV filters were analysed and presented in tabular and graphical format. UV filters or zinc oxide were present in 22.5% of all 4447 products, ranging from almost 100% in sunscreens to a few per cent in, for example, some hair products; they were absent in two product categories. Frequently, several different UV filters were included in one product, for example in sunscreens (median 4) and in perfumes (median 3). The overall most frequent UV filters were butyl methoxydibenzoylmethane and titanium dioxide, combined mostly with octocrylene in sunscreens and with ethylhexyl methoxycinnamate in creams. The frequent co-occurrence of UV filters in cosmetic products possibly facilitates sensitization, and may explain why patients often react to chemically unrelated UV filters. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. Tritium ions in the Source and Transport Section (STS) of KATRIN

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Manuel [Karlsruhe Institute of Technology (Germany); Collaboration: KATRIN-Collaboration

    2016-07-01

    The KArlsruhe TRItium Neutrino (KATRIN) experiment aims at the model independent measurement of the electron neutrino mass. It is designed for a neutrino mass sensitivity of 0.2 eV (90% CL) after three years of measurement time. KATRIN measures the end point of the tritium beta decay spectrum using a MAC-E filter and a Windowless Gaseous Tritium Source (WGTS). While neutral tritium gas molecules are pumped through the WGTS, the decay electrons are guided to the detector with a magnetic field. Tritium ions, however, also leave the WGTS following the magnetic field lines. For KATRIN measurements it is imperative to prevent tritium ions from reaching the detector or the spectrometers, where they could decay and cause an indistinguishable background. Ion blocking measures are implemented by electric blocking potentials and electric dipoles to drift out trapped ions. Their effective operation will be tested during KATRIN commissioning measurements: The ion flux between STS and spectrometers can be measured with the Forward Beam Monitor (FBM). It offers a manipulator arm to introduce a detector into the flux tube. For ion detection, a Faraday Cup for the FBM is being designed and constructed.

  6. Development studies for the ILC: Measurements and simulations for a time projection chamber with GEM technology

    Science.gov (United States)

    Ledermann, Bernhard; Kaminski, Jochen; Kappler, Steffen; Müller, Thomas

    2007-10-01

    A Time Projection Chamber (TPC) with Gas Electron Multiplier (GEM) technology is well suited for usage as central tracker at the International Linear Collider (ILC). To study the high potential of this detector type a small prototype of 25 cm length was built in Karlsruhe and used in several experimental setups. In this publication the results of these measurements and of additional Monte Carlo simulations are presented. By introducing the so-called equivalent drift distance a combination of all results was possible leading to a recommended configuration of the multi-GEM tower for the ILC-TPC. It will be shown that for conditions considered in the TESLA-TDR the transverse spatial resolution will be able to reach 65 μm for 10 cm and 190 μm for 200 cm drift at the ILC. This as well as the expectations for longitudinal spatial resolution, for energy resolutions of the specific ionization, and for single pad row efficiency should be able to meet the requirements of a future ILC-TPC.

  7. Liquid metal technology for concentrated solar power systems: Contributions by the German research program

    Directory of Open Access Journals (Sweden)

    Thomas Wetzel

    2014-03-01

    Full Text Available Concentrated solar power (CSP systems can play a major role as a renewable energy source with the inherent possibility of including a thermal energy storage subsystem for improving the plant dispatchability. Next-generation CSP systems have to provide an increased overall efficiency at reduced specific costs and they will require higher operating temperatures and larger heat flux densities. In that context, liquid metals are proposed as advanced high temperature heat transfer fluids, particularly for central receiver systems. Their main advantages are chemical stability at temperatures up to 900 ℃ and even beyond, as well as largely improved heat transfer when compared to conventional fluids like oil or salt mixtures, primarily due to their superior thermal conductivity. However, major issues here are the corrosion protection of structural materials and the development of technology components and control systems, as well as the development of indirect storage solutions, to circumvent the relatively small heat capacity of liquid metals. On the other hand, using liquid metals might enable alternative technologies like direct thermal-electric conversion or use of solar high-tem­perature heat in chemical processes. This article aims at describing research areas and research needs to be addressed for fully evaluating and subsequently utilizing the potential of liquid metals in CSP systems. A second aim of the article is a brief overview of the liquid metal research capabilities of Karlsruhe Institute of Technology (KIT, their background and their relation to CSP and the aforementioned research pathways.

  8. Prevalence of obesity and motor performance capabilities in Tyrolean preschool children.

    Science.gov (United States)

    Greier, Klaus; Riechelmann, Herbert; Burtscher, Martin

    2014-07-01

    The childrens' world of movement has changed dramatically during the last decades. As a consequence motor performance decreases particularly in children affected by overweight and obesity. This study analyses the influence of the body mass index (BMI) on motor performance of pre-school children. In a cross-sectional study including 41 kindergartens in Tyrol (Austria), 4- to 5-year-old children (n = 1,063) were recruited. Four BMI groups were used according to a German BMI reference system: Group I (anorexic/underweight), group II (normal weight), group III (overweight) and group IV (obese). Motor performance was assessed by the use of the Karlsruhe Motorik-Screening (KMS 3-6). Out of the 1,063 preschool children (550 ♂, 513 ♀) 7.6 % (n = 81) were overweight and 5.5 % (n = 58) were obese. The results demonstrate that motor performance of under- and overweight preschool-children is not different from children with normal BMI, but obese children had significantly lower motor performance (p Tyrolean preschool children is similar to those of non-mountainous areas of Austria and Germany. The fact that motor performance is reduced only in obese children suggests that targeted promotion of physical activity is urgently needed for preschool children particularly considering children with a risk to develop obesity. Besides the efforts of parents, nursery schools are the ideal setting for intervention measures.

  9. TRAMWAY MANAGEMENT SYSTEM IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Melia Damayanti

    2015-01-01

    Full Text Available Tramway systems, which can carry more passengers than buses at one haul, are now being proposed to meet Indonesia’s public transport requirement. The objective of this research is to analyze the management structures for operating tram in different countries and then propose a suitable organizational structure for operating trams, if re-introduced, in Indonesia. The author chose France (Montpellier tramway, Germany (Karlsruhe tram-train and the UK (Nottingham Express Transit as the role model countries for investigation. From the analysis, the most appropriate organizational structure and suitable tramway management structure for operating tramways implementation in Indonesia. The key features of the research are to establish public transport company by local government to manage all public transport systems, propose tramway construction and operation to exist as separate departments under the tramway team division of the public company, recommend the public transport company to have responsibility for overseeing construction of the trams, operating, and maintaining the trams, suggest local government to own them and have responsibility for tramway strategic policy, control regulation as well as supervision and coordination of the performance of the public transport company, propose joint working between public and private sectors.

  10. Neutron Studies for Dating the Universe

    CERN Document Server

    Kappeler, F; Mengoni, A; Heil, M; Mosconi, M; Domingo-Pardo, C

    2011-01-01

    The neutron capture cross sections of (186)Os and (187)Os are of key importance for defining the 8-process abundance of (187)Os at the formation of the solar system. This quantity can be used to determine the radiogenic abundance component of (187)Os from the decay of (187)Re (t(1/2) = 41.2 Gyr) and to infer the time-duration of the nucleosynthesis in our galaxy (Re/Os cosmochronometer). The neutron capture cross sections of (186)Os, (187)Os, and (188)Os have been measured at the CERN n_TOF facility from 1 eV to 1 MeV, covering the entire energy range of astrophysical interest. From these data Maxwellian averaged capture cross sections have been calculated with uncertainties between 3.3 and 4.7\\%. Additional information was obtained by measuring the inelastic scattering cross section of (187)Os at the Karlsruhe 3.7 MV Van de Graaff accelerator and by neutron resonance analyses of the n_TOF capture data to establish a comprehensive experimental basis for the Hauser-Feshbach statistical model. Consistent I-IF c...

  11. Model-supported interpretation of the electrochemical characteristics of solid oxide fuel cells with Ni/YSZ cermet anodes; Modellgestuetzte Interpretation der elektrochemischen Charakteristik von Festoxid-Brennstoffzellen mit Ni/YSZ-Cermetanoden

    Energy Technology Data Exchange (ETDEWEB)

    Gewies, Stefan

    2009-01-29

    This work presents the development, validation and application of a multiscale model for the detailed description of a solid oxide fuel cell (SOFC) with a Ni/YSZ (nickel/yttria-stabilized zirconia) cermet anode. The aim of the study is the identification of the physico-chemical loss processes, as seen in impedance spectra and polarization curves. The model consists of an elementary kinetic description of the electrochemistry including the development of an electrical double layer at the electrode/electrolyte interface of the cermet anode, a homogenized description of charge and gas-phase transport in the electrodes as well as a macroscopic description of convective and diffusive mass transport in the gas phase above the electrodes. For the rst time this study allows for a complete description of the impedance spectra of a diffusively fuel-supplied cermet anode. By comparing simulations with experiments on symmetrical cells (University of Karlsruhe) three dominant loss processes could be identified. The model was extended to account for the description of segmented SOFCs. In correspondence with experimental data (German Aerospace Center) the simulations show strong gradients in current densities and gas concentrations. (orig.)

  12. Milestone M4FT-13LL0807071: International Collaboration - Radionuclide Interactions and Transport in Geologic Repository Environments - Pu Interaction with Bentonite

    Energy Technology Data Exchange (ETDEWEB)

    Begg, J D [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zavarin, M [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kersting, A B [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-11-13

    The focus of this project is to investigate radionuclide interactions with natural and engineered materials, specifically the mineral bentonite that will be used in EU repositories and possibly in US high-level waste repository designs. These experiments are designed to develop a mechanistic understanding of Pu interactions with representative mineral substrates under granitic chemical conditions. The sorption/desorption experiments cover a large range of Pu concentrations and will be compared to sorption/desorption experiment with montmorillonite. The experiments are being coordinated with the Colloid Formation and Migration (CFM) international project led by Karlsruhe Institute of Technology and located at the Grimsel Test Site underground research laboratory in Switzerland. Experiments will be completed by 8/15/2014. Milestone M4FT-13LL0807071 is a progress report on this effort. The research is addressing the following FEPs/needs identified in the R&D Roadmap: 2.2.09.05 - radionuclide speciation and solubility in host rock; 2.2.09.55 - sorption of dissolved radionuclides in host rock; 2.2.09.59 - colloidal transport in host rock.

  13. Swedish-German actinide migration experiment at ASPO hard rock laboratory.

    Science.gov (United States)

    Kienzler, B; Vejmelka, P; Römer, J; Fanghänel, E; Jansson, M; Eriksen, T E; Wikberg, P

    2003-03-01

    Within the scope of a bilateral cooperation between Svensk Kärnbränslehantering (SKB) and Forschungszentrum Karlsruhe, Institut für Nukleare Entsorgung (FZK-INE), an actinide migration experiment is currently being performed at the Aspö Hard Rock Laboratory (HRL) in Sweden. This paper covers laboratory and in situ investigations on actinide migration in single-fractured granite core samples. For the in situ experiment, the CHEMLAB 2 probe developed by SKB was used. The experimental setup as well as the breakthrough of inert tracers and of the actinides Am, Np and Pu are presented. The breakthrough curves of inert tracers were analyzed to determine hydraulic properties of the fractured samples. Postmortem analyses of the solid samples were performed to characterize the flow path and the sorbed actinides. After cutting the cores, the abraded material was analyzed with respect to sorbed actinides. The slices were scanned optically to visualize the flow path. Effective volumes and inner surface areas were measured. In the experiments, only breakthrough of Np(V) was observed. In each experiment, the recovery of Np(V) was < or = 40%. Breakthrough of Am(III) and Pu(IV) as well as of Np(IV) was not observed. Copyright 2002 Elsevier Science B.V.

  14. Swedish-German actinide migration experiment at ÄSPÖ hard rock laboratory

    Science.gov (United States)

    Kienzler, B.; Vejmelka, P.; Römer, J.; Fanghänel, E.; Jansson, M.; Eriksen, T. E.; Wikberg, P.

    2003-03-01

    Within the scope of a bilateral cooperation between Svensk Kärnbränslehantering (SKB) and Forschungszentrum Karlsruhe, Institut für Nukleare Entsorgung (FZK-INE), an actinide migration experiment is currently being performed at the Äspö Hard Rock Laboratory (HRL) in Sweden. This paper covers laboratory and in situ investigations on actinide migration in single-fractured granite core samples. For the in situ experiment, the CHEMLAB 2 probe developed by SKB was used. The experimental setup as well as the breakthrough of inert tracers and of the actinides Am, Np and Pu are presented. The breakthrough curves of inert tracers were analyzed to determine hydraulic properties of the fractured samples. Postmortem analyses of the solid samples were performed to characterize the flow path and the sorbed actinides. After cutting the cores, the abraded material was analyzed with respect to sorbed actinides. The slices were scanned optically to visualize the flow path. Effective volumes and inner surface areas were measured. In the experiments, only breakthrough of Np(V) was observed. In each experiment, the recovery of Np(V) was ≤40%. Breakthrough of Am(III) and Pu(IV) as well as of Np(IV) was not observed.

  15. Bias determination and precision validation of ozone profiles from MIPAS-Envisat retrieved with the IMK-IAA processor

    Directory of Open Access Journals (Sweden)

    T. Steck

    2007-07-01

    Full Text Available This paper characterizes vertical ozone profiles retrieved with the IMK-IAA (Institute for Meteorology and Climate Research, Karlsruhe – Instituto de Astrofisica de Andalucia science-oriented processor from high spectral resolution data (until March 2004 measured by the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS aboard the environmental satellite Envisat. Bias determination and precision validation is performed on the basis of correlative measurements by ground-based lidars, Fourier transform infrared spectrometers, and microwave radiometers as well as balloon-borne ozonesondes, the balloon-borne version of MIPAS, and two satellite instruments (Halogen Occultation Experiment and Polar Ozone and Aerosol Measurement III. Percentage mean differences between MIPAS and the comparison instruments for stratospheric ozone are generally within ±10%. The precision in this altitude region is estimated at values between 5 and 10% which gives an accuracy of 15 to 20%. Below 18 km, the spread of the percentage mean differences is larger and the precision degrades to values of more than 20% depending on altitude and latitude. The main reason for the degraded precision at low altitudes is attributed to undetected thin clouds which affect MIPAS retrievals, and to the influence of uncertainties in the water vapor concentration.

  16. Commissioning of the catalytic plasma exhaust clean-up facility caprice and first experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Glugla, M.; Kraemer, R.; Penzhorn, R.D.; Le, T.L.; Simon, K.H.; Guenther, K.; Besserer, U.; Schaefer, P.; Hellriegel, W. [Research Center Karlsruhe (Germany); Geissler, H. [Kraftanlagen Heidelberg (Germany)

    1995-10-01

    A fuel clean-up process for all plasma exhaust gases from DT fusion machines, based on catalytic conversion reactions combined with permeation of hydrogen isotopes through palladium/silver, has been developed. The complete process has already been proven with relevant concentrations of tritium at laboratory scale. On the basis of the results obtained the technical facility `CAPRICE` was designed, and is now under tritium operation at the Tritium Laboratory Karlsruhe (TLK). The facility is being used to demonstrate the process on a target throughput of 10 mol/h DT and 1 mol/h tritiated and non-tritiated impurities. Full scale experiments with hydrogen and deuterium have been completed to verify the design parameters of the facility and to gain detailed knowledge on the performance of the different subsystems under a variety of experimental conditions. Decontamination factors were obtained from these experiments as well as from first tritium runs employing about 350 Ci (0.5%) tritium in deuterium. 4 refs., 6 figs., 1 tab.

  17. Scientists of tomorrow - Geophysics School Lab for Secondary School Students

    Science.gov (United States)

    Gottschämmer, Ellen; Bohlen, Thomas

    2014-05-01

    Starting in 2012, the Geophysical Institute (GPI) at Karlsruhe Institute of Technology (KIT) developed several geophysical experiments for secondary school students which are now part of the Geophysics School Lab at the GPI. Usually, the students visit the School Lab as a class together with their teacher (Physics, Geography, Science), but the School Lab can also be used for extracurricular learning of individual students. The experiments carried out deal with the topics Seismology, Geoelectrics, and Fluid Dynamics: A horizontal seismometer is decoupled from its registration unit for the time of the visit of the students. With this setup, the students can measure the natural period of the pendulum, and adjust the seismometer accordingly. At different experimental stations, students can analyse seismic data registered with this unit, locate earthquakes, or get to know and understand an accelerometer. The accelerometer is attached to a registration unit and data can be visualized in real time. In another experimental setup, the students can measure the viscosity of a fluid as a function of temperature in order to get a better understanding of different magma types and their viscosity. Furthermore, a geoelectric experiment is carried out in a sandbox: The students experience with non-destructive testing, and try to reveal the subsurface structure. For our experiments, secondary school teachers can receive free supportive materials for the preparation of the visit. The aim of the Geophysics School Lab is to encourage and acquaint secondary school students to the concepts of Geophysics, and to enthuse them with the applied issues of Geosciences.

  18. Cold vacuum chamber for diagnostics: Analysis of the measurements at the Diamond Light Source and impedance bench measurements

    Directory of Open Access Journals (Sweden)

    R. Voutta

    2016-05-01

    Full Text Available The beam heat load is an important input parameter needed for the cryogenic design of superconducting insertion devices. Theoretical models taking into account the different heating mechanisms of an electron beam to a cold bore predict smaller values than the ones measured with several superconducting insertion devices installed in different electron storage rings. In order to measure and possibly understand the beam heat load to a cold bore, a cold vacuum chamber for diagnostics (COLDDIAG has been built. COLDDIAG is equipped with temperature sensors, pressure gauges, mass spectrometers as well as retarding field analyzers which allow to measure the beam heat load, total pressure, and gas content as well as the flux of particles hitting the chamber walls. COLDDIAG was installed in a straight section of the Diamond Light Source (DLS. In a previous paper the experimental equipment as well as the installation of COLDDIAG in the DLS are described [S. Gerstl et al., Phys. Rev. ST Accel. Beams 17, 103201 (2014]. In this paper we present an overview of all the measurements performed with COLDDIAG at the DLS and their detailed analysis, as well as impedance bench measurements of the cold beam vacuum chamber performed at the Karlsruhe Institute of Technology after removal from the DLS. Relevant conclusions for the cryogenic design of superconducting insertion devices are drawn from the obtained results.

  19. Cold vacuum chamber for diagnostics: Analysis of the measurements at the Diamond Light Source and impedance bench measurements

    Science.gov (United States)

    Voutta, R.; Gerstl, S.; Casalbuoni, S.; Grau, A. W.; Holubek, T.; Saez de Jauregui, D.; Bartolini, R.; Cox, M. P.; Longhi, E. C.; Rehm, G.; Schouten, J. C.; Walker, R. P.; Migliorati, M.; Spataro, B.

    2016-05-01

    The beam heat load is an important input parameter needed for the cryogenic design of superconducting insertion devices. Theoretical models taking into account the different heating mechanisms of an electron beam to a cold bore predict smaller values than the ones measured with several superconducting insertion devices installed in different electron storage rings. In order to measure and possibly understand the beam heat load to a cold bore, a cold vacuum chamber for diagnostics (COLDDIAG) has been built. COLDDIAG is equipped with temperature sensors, pressure gauges, mass spectrometers as well as retarding field analyzers which allow to measure the beam heat load, total pressure, and gas content as well as the flux of particles hitting the chamber walls. COLDDIAG was installed in a straight section of the Diamond Light Source (DLS). In a previous paper the experimental equipment as well as the installation of COLDDIAG in the DLS are described [S. Gerstl et al., Phys. Rev. ST Accel. Beams 17, 103201 (2014)]. In this paper we present an overview of all the measurements performed with COLDDIAG at the DLS and their detailed analysis, as well as impedance bench measurements of the cold beam vacuum chamber performed at the Karlsruhe Institute of Technology after removal from the DLS. Relevant conclusions for the cryogenic design of superconducting insertion devices are drawn from the obtained results.

  20. Participatory evaluation of disaster resilience performance with urban stakeholders: An implementation case study before and after the 2015 Nepal Ghorka earthquake

    Science.gov (United States)

    Khazai, B.; Anhorn, J.; Burton, C.

    2016-12-01

    Approaches that make resilience tangible and operational for decision makers have to deal effectively with the degree of impact and change required through different strategic actions in addressing agreed-upon resilience goals. A Resilience Performance Scorecard (RPS) has been designed to enable local stakeholders in identifying existing strengths and weaknesses through providing information on key performance targets along six dimensions of urban resilience both at the city and sub-city district level of geography. The purpose in the development of the Scorecard approach is to build a tool that can provide information on the overall resilience performance and capture the key functional and organizational areas for urban resilience with local government officials. The Resilience Performance Scorecard (RPS) was developed jointly by the Center for Disaster Management and Risk Reduction Technology (CEDIM) at Karlsruhe Institute of Technology, the South Asia Institute (SAI) at Heidelberg University, the and Global Earthquake Model (GEM) Foundation. It was initially implemented with the Lalitpur Sub-Metropolitan Municipality in Nepal one year before the 25 April 7.8 magnitude Gorkha earthquake event as a self-evaluation tool through a fully participatory process with local stakeholders. In a follow-up participatory assessment and implementation of the RPS one month after the earthquake, the results of the participatory resilience investigation demonstrate areas where action towards resilience should be prioritized and reflect the change in perception of resilience among the stakeholders in the face of a large damaging event.

  1. Partitioned fluid-solid coupling for cardiovascular blood flow: left-ventricular fluid mechanics.

    Science.gov (United States)

    Krittian, Sebastian; Janoske, Uwe; Oertel, Herbert; Böhlke, Thomas

    2010-04-01

    We present a 3D code-coupling approach which has been specialized towards cardiovascular blood flow. For the first time, the prescribed geometry movement of the cardiovascular flow model KaHMo (Karlsruhe Heart Model) has been replaced by a myocardial composite model. Deformation is driven by fluid forces and myocardial response, i.e., both its contractile and constitutive behavior. Whereas the arbitrary Lagrangian-Eulerian formulation (ALE) of the Navier-Stokes equations is discretized by finite volumes (FVM), the solid mechanical finite elasticity equations are discretized by a finite element (FEM) approach. Taking advantage of specialized numerical solution strategies for non-matching fluid and solid domain meshes, an iterative data-exchange guarantees the interface equilibrium of the underlying governing equations. The focus of this work is on left-ventricular fluid-structure interaction based on patient-specific magnetic resonance imaging datasets. Multi-physical phenomena are described by temporal visualization and characteristic FSI numbers. The results gained show flow patterns that are in good agreement with previous observations. A deeper understanding of cavity deformation, blood flow, and their vital interaction can help to improve surgical treatment and clinical therapy planning.

  2. Cooling and spreading of corium during its fall into water in a pressurised water nuclear plant severe accident: description of mechanical and thermal interactions in a three phase flow during spreading of cold or heated spheres in a liquid pool; Refroidissement et dispersion du corium lors de sa chute dans l'eau pendant un accident severe de reacteur nucleaire a eau pressurisee: description des interactions mecaniques et thermiques en ecoulement triphasique lors de la dispersion de spheres solides froides ou chaudes dans un bain liquide

    Energy Technology Data Exchange (ETDEWEB)

    Duplat, F

    1998-10-26

    In the frame of nuclear safety studies about corium and water interactions, we address spreading and cooling stage of corium fragments in a liquid pool. Considering the complexity of encountered flow regimes and mechanical and thermal interactions coupling, modelling validation is based on a thermal-hydraulic computer code (MC3D). A bibliographical study shows that classical modelling of three phase flow is based on constitutive laws already established in the case of two phase flow. The present study states a complete analysis of BILLEAU experiments and defines a characterisation method for a sphere cloud. Some complementary QUEOS experiments are also described. Mechanical interaction terms such as added mass, lift and turbulent dispersion have been presented in the frame of a three phase flow and their influence has been tested in numerical simulations of BILLEAU tests. The effect of film vapour overheat, as well as particle diameter evolution have been studied. Moreover a radiative heat transfer modelling developed in Karlsruhe research centre (FZK) has been analysed and completed. Numerical simulations achieved for this study show that mechanical and thermal behaviour of the system are actually coupled. Taking into account lift and turbulent dispersion terms as well as heat transfer modifications all wed better results. This study also presents some considerations about flow regimes identification as a preliminary for studies about numerical diffusion that was already estimated in the present state of the computer code MC3D. (author)

  3. Deep-etch x-ray lithography at the ALS: First results

    Energy Technology Data Exchange (ETDEWEB)

    Malek, C.K.; Jackson, K.H. [Ernest Orlando Lawrence Berkeley National Lab., CA (United States); Brennen, R.A. [Jet Propulsion Lab., Pasadena, CA (United States)] [and others

    1997-04-01

    The fabrication of high-aspect-ratio and three-dimensional (3D) microstructures is of increasing interest in a multitude of applications in fields such as micromechanics, optics, and interconnect technology. Techniques and processes that enable lithography in thick materials differ from the planar technologies used in standard integrated circuit processing. Deep x-ray lithography permits extremely precise and deep proximity printing of a given pattern from a mask into a very thick resist. It requires a source of hard, intense, and well collimated x-ray radiation, as is provided by a synchrotron radiation source. The thick resist microstructures, so produced can be used as templates from which ultrahigh precision parts with high aspect ratios can be mass-produced out of a large variety of materials (metals, plastics, ceramics). This whole series of techniques and processes has been historically referred to as {open_quotes}LIGA,{close_quotes} from the German acronym for lithography, electroforming (Galvanoformung), and plastic molding (Abformung), the first development of the basic LIGA process having been performed at the Nuclear Research Center at Karlsruhe in Germany.

  4. The MEKKA-facility - a flexible tool to investigate MHD-flow phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Barleon, L.; Mack, K.J.; Stieglitz, R.

    1996-09-01

    This report describes the design of the MEKKA facility of the Institute of Applied Thermo- and Fluiddynamics (IATF) at the Research Centre Karlsruhe. Besides the original motivation of the MEKKA laboratory to measure fusion relevant magnetohydrodynamic (MHD) flows other possible MHD topics which may gain importance in the future are outlined. After a short introduction into the basics of magnetohydrodynamics the major MHD flow problems appearing in liquid metal cooled fusion blankets are addressed. Later the selection process of the liquid metal used in the experimental facility is discussed under operational and environmental aspects. The main description is focussed on the design and the construction of the liquid metal loops including all relevant components. Another section deals with the discussion of the measurement techniques commonly used in MHD and their accuracy and applicability to specific configurations. Finally some of the major experimental results obtained in the MEKKA-facility are outlined and their consequences with respect to the use in technical components are discussed. (orig.)

  5. Experimental and numerical simulation of passive decay heat removal by sump cooling after cool melt down

    Energy Technology Data Exchange (ETDEWEB)

    Knebel, J.U.; Kuhn, D.; Mueller, U. [Institut fuer Angewandet Thermo- und Fluiddynamik (IATF) (Germany)

    1997-12-01

    This article presents the basic physical phenomena and scaling criteria of passive decay heat removal from a large coolant pool by single-phase and two-phase natural circulation. The physical significance of the dimensionless similarity groups derived is evaluated. The above results are applied to the SUCO program that is performed at the Forschungszentrum Karlsruhe. The SUCO program is a three-step series of scaled model experiments investigating the possibility of a sump cooling concept for future light water reactors. The sump cooling concept is based on passive safety features within the containment. The work is supported by the German utilities and the Siemens AG. The article gives results of temperature and velocity measurements in the 1:20 linearly scaled SUCOS-2D test facility. The experiments are backed up by numerical calculations using the commercial software package Fluent. Finally, using the similarity analysis from above, the experimental results of the model geometry are scaled-up to the conditions in the prototype, allowing a first statement with regard to the feasibility of the sump cooling concept. 11 refs., 9 figs., 3 tabs.

  6. A summary report on feed preparation offgas and glass redox data for Hanford waste vitrification plant: Letter report

    Energy Technology Data Exchange (ETDEWEB)

    Merz, M.D.

    1996-03-01

    Tests to evaluate feed processing options for the Hanford Waste Vitrification Plant (HWVP) were conducted by a number of investigators, and considerable data were acquired for tests of different scale, including recent full-scale tests. In this report, a comparison was made of the characteristics of feed preparation observed in tests of scale ranging from 57 ml to full-scale of 28,000 liters. These tests included Pacific Northwest Laboratory (PNL) laboratory-scale tests, Kernforschungszentrums Karlsruhe (KfK) melter feed preparation, Research Scale Melter (RSM) feed preparation, Integrated DWPF Melter System (IDMS) feed preparation, Slurry Integrated Performance Testing (SIPT) feed preparation, and formic acid addition to Hanford Neutralized Current Acid Waste (NCAW) care samples.` The data presented herein were drawn mainly from draft reports and include system characteristics such as slurry volume and depth, sweep gas flow rate, headspace, and heating and stirring characteristics. Operating conditions such as acid feed rate, temperature, starting pH, final pH, quantities and type of frit, nitrite, nitrate, and carbonate concentrations, noble metal content, and waste oxide loading were tabulated. Offgas data for CO{sub 2}, NO{sub x}, N{sub 2}O, NO{sub 2}, H{sub 2} and NH{sub 3} were tabulated on a common basis. Observation and non-observation of other species were also noted.

  7. Analytical bunch compression studies for a linac-based electron accelerator

    Directory of Open Access Journals (Sweden)

    M. Schreck

    2015-10-01

    Full Text Available The current paper deals with analytical bunch compression studies for FLUTE whose results are compared to simulations. FLUTE is a linac-based electron accelerator with a design energy of approximately 40 MeV currently being constructed at the Karlsruhe Institute of Technology. One of the goals of FLUTE is to generate electron bunches with their length lying in the femtosecond regime. In the first phase this will be accomplished using a magnetic bunch compressor. This compressor forms the subject of the studies presented. The paper is divided into two parts. The first part deals with pure geometric investigations of the bunch compressor where space charge effects and the backreaction of bunches with coherent synchrotron radiation are neglected. The second part is dedicated to the treatment of space charge effects. The upshot is that the analytical results in the two parts agree quite well with what is obtained from simulations. This paper shall form the basis for future analytical studies of the FLUTE bunch compressor and of bunch compression, in general.

  8. A comparison of socio-economic loss analysis from the 2013 Haiyan Typhoon and Bohol Earthquake events in the Philippines in near real-time

    Science.gov (United States)

    Daniell, James; Mühr, Bernhard; Kunz-Plapp, Tina; Brink, Susan A.; Kunz, Michael; Khazai, Bijan; Wenzel, Friedemann

    2014-05-01

    economic losses. 4. After the initial estimate, damage patterns were examined and the loss estimates calibrated. The economic loss estimates of 9.5 billion USD capital stock and 4.1 billion USD GDP costs and the estimate of 2.1 million long term homeless from the Typhoon Haiyan event from the initial model proved very accurate with around the same values coming from reports around a month after the event. For the Bohol earthquake, the economic loss estimate was reasonable (around 100 million USD), however, the number of fatalities was slightly underestimated given the intensity field being underestimated and due to the number of landslide and other deaths (heart attacks etc.) in the first day. As the damage estimates were reported on post-disaster over the next days, the fatality function was calibrated and produced results closer to 200 deaths. Such parsimonious modelling in the aftermath of a disaster and socioeconomic profiling of the disaster area can prove useful to relief agencies and governments as well as those on the ground giving a first estimate of the extent of the damage and the models will as such continue to be developed in the course of FDA. Daniell J.E. (2014) The development of socio-economic fragility functions for use in worldwide rapid earthquake loss estimation procedures, Ph.D. Thesis (in publishing), Karlsruhe Institute of Technology, Karlsruhe, Germany.

  9. Parameterization of a process-based soil erosion model by means of experimental field measurements

    Science.gov (United States)

    Butzen, Verena; Seeger, Manuel; Scherer, Ulrike; Casper, Markus; Ries, Johannes B.

    2010-05-01

    of the different system conditions. For spatial discretization, 'Erosion response units' (ERUs) (Märker, 2001) are derived from spatially distributed data on land-use, soil types and a digital terrain model, as well as from the results of the rainfall simulations. The ERUs are used for the delineation of the slopes and slope segments that represent the spatial modeling units in CATFLOW-SED. So each spatial modeling unit can be supposed to have 'homogeneous' (or at least comparable) hydrological and soil erosion properties. Märker, M. (2001), Regionale Erosionsmodellierung unter Verwendung des Konzepts der Erosion Response Units (ERU) am Beispiel zweier Flusseinzugsgebiete im südlichen Afrika, 226 pp., Chemisch-Geowissenschaftlichen Fakultät der Friedrich-Schiller-Universität Jena. Maurer, T. (1997), Physikalisch begründete, zeitkontinuierliche Modellierung des Wassertransports in kleinen ländlichen Einzugsgebieten, 252 pp., Fakultät für Bauingenieur- und Vermessungswesen, Universität Fridericiana zu Karlsruhe (TH). Scherer, U. (2008), Prozessbasierte Modellierung der Bodenerosion in einer Lösslandschaft, 248 pp., Fakultät für Bauingenieur-, Geo- und Umweltwissenschaften, Universität Fridericiana zu Karlsruhe (TH).

  10. A New Method Using Single-Particle Mass Spectrometry Data to Distinguish Mineral Dust and Biological Aerosols

    Science.gov (United States)

    Al-Mashat, H.; Kristensen, L.; Sultana, C. M.; Prather, K. A.

    2016-12-01

    The ability to distinguish types of particles present within a cloud is important for determining accurate inputs to climate models. The chemical composition of particles within cloud liquid droplets and ice crystals can have a significant impact on the timing, location, and amount of precipitation that falls. Precipitation efficiency is increased by the presence of ice crystals in clouds, and both mineral dust and biological aerosols have been shown to be effective ice nucleating particles (INPs) in the atmosphere. A current challenge in aerosol science is distinguishing mineral dust and biological material in the analysis of real-time, ambient, single-particle mass spectral data. Single-particle mass spectrometers are capable of measuring the size-resolved chemical composition of individual atmospheric particles. However, there is no consistent analytical method for distinguishing dust and biological aerosols. Sampling and characterization of control samples (i.e. of known identity) of mineral dust and bacteria were performed by the Aerosol Time-of-Flight Mass Spectrometer (ATOFMS) as part of the Fifth Ice Nucleation (FIN01) Workshop at the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) facility in Karlsruhe, Germany. Using data collected by the ATOFMS of control samples, a new metric has been developed to classify single particles as dust or biological independent of spectral cluster analysis. This method, involving the use of a ratio of mass spectral peak areas for organic nitrogen and silicates, is easily reproducible and does not rely on extensive knowledge of particle chemistry or the ionization characteristics of mass spectrometers. This represents a step toward rapidly distinguishing particle types responsible for ice nucleation activity during real-time sampling in clouds. The ability to distinguish types of particles present within a cloud is important for determining accurate inputs to climate models. The chemical composition of particles

  11. Civil Protection issues in urban management of natural hazards

    Science.gov (United States)

    Bostenaru, Maria; Georgescu, Sever; Goretti, Agostino; Markus, Michael

    2010-05-01

    This paper reviews different approaches of collaboration with the Civil Protection across Europe, from the experience of the author. The first contact came working as a research assistant at the Universität Karlsruhe (TH), Germany, in frame of the SFB (Collaborative Research Centre) 461 "Strong earthquakes", which featured a collaboration Germany-Romania. The subproject C7, where involved, about Novel Rescue technologies was a collaboration between the Institute for Technology and Management in Construction, formerly Institute for Construction Management and Machinery, and the Romanian Civil Protection. The scientific results of the project were to be lated implemented by the Civil Protection. In course of the work contacts were done also through the work of the research associate, sub-project leader, in the THW (German Technical Assistance). Later on work continued at the same institute but in frame of the Research Training Network "Natural Disasters" when also contacts with the Romanian representative to the European Earthquake Engineering Association, were established. Working further in the same field of Natural Disasters, especially seismic risk, brought the author to the ROSE School in Pavia, Italy, researches of which closely collaborate with the EUCENTRE, founded, among other institutions, by the Italian Civil Protection. Particularly the collaboration with specialists from the Italian Civil Protection resulted in several initiatives, such as: - paper contribution to a special issue edited by the author, - organisation of EGU sessions on the topic of "Natural Hazards' Impact on Urban Areas and Infrastructure", - invited review of papers, - attendance of short course coordinated at the ROSE School on post-earthquake safety assessment, - ellaboration of scientific projects submitted for funding on the topic of earthquake hazard impact at various geographic scales, - further publication collaborations are in work, - it is intended to improve the collaboration

  12. Impacts of Extreme Hot Weather Events on Electricity Consumption in Baden-Wuerttemberg

    Science.gov (United States)

    Mimler, S.

    2009-04-01

    Changes in electricity consumption due to hot weather events were examined for the German federal state Baden-Württemberg. The analysis consists of three major steps: Firstly, an analysis of the media coverage on the hot summer of 2003 gives direct and indirect information about changes in electricity demand due to changes in consumption patterns. On the one hand there was an overall increase in electricity demand due to the more frequent use of air conditionings, fans, cooling devices and water pumps. On the other hand shifts in electricity consumption took place due to modifications in daily routines: if possible, core working times were scheduled earlier, visitor streams in gastronomy and at events shifted from noon to evening hours, a temporal shifting of purchases took place in early morning or evening hours, and an increased night-activity was documented by a higher number of police operations due to noise disturbances. In a second step, some of the findings of the media analysis were quantified for households in the city region of Karlsruhe. For the chosen electric device groups refrigerators, mini-coolers, air conditionings, fans and electric stoves the difference between the consumption on a hot summer day and a normal summer day was computed. For this purpose, assumptions had to be made on the share of affected households, affected devices or usage patterns. These assumptions were summarized into three scenarios on low, medium and high heat induced changes in electricity consumption. In total, the quantification resulted in a range of about 7.5 to 9.2 % of heat-induced over-consumption related to the average amount of electrical load that is normally provided to Karlsruhe households on a summer's day. A third analysis of summer load curves aimed at testing the following hypotheses derived from the media analysis regarding changes in every-day routines and their effects on shifts in load profiles. To test the hypotheses, correlation tests were applied. (1

  13. Determination of 3D surface displacement rates in the Upper Rhine Graben based on GURN (GNSS Upper Rhine Graben Network)

    Science.gov (United States)

    Mayer, M.; Knöpfler, A.; Masson, F.; Ulrich, P.; Heck, B.

    2012-04-01

    In September 2008, the Institut de Physique du Globe de Strasbourg (Ecole et Observatoire des Sciences de la Terre) and the Geodetic Institute of Karlsruhe University (now: Karlsruhe Institute of Technology) established the transnational cooperation GURN (GNSS Upper Rhine Graben Network). Within the GURN initiative, these institutions are cooperating in order to carry out geo-scientific research in the framework of the transnational project TOPO-WECEP (Western and Central European Platform; link: http://www.topo-wecep.eu/), which succeeded the former project URGENT (Upper Rhine Graben Evolution and NeoTectonics; link: http://comp1.geol.unibas.ch) of the EUCOR universities (European Confederation of Upper Rhine Universities). The Rhine Graben is the central segment of the European Cenozoic rift system, which extends from the North Sea through Germany and France to the Mediterranean coast over a distance of some 1100 km. GURN focusses on the Upper Rhine Graben (URG). The URG is a 300 km long and 40 km wide SSW-NNE trending rift, extending from Basel (Switzerland) to Frankfurt (Germany). It is limited to the west by the Vosges Mountains and to the east by the Black Forest Mountains, culminating in elevations of approx. 1500 m. The uplifted area of the Rhenish Massif bounds the URG to the north. To the south, the Leymen, Ferrette, and Vendlincourt folds represent the northernmost structural front of the Jura fold and thrust belt. Present-day distribution of the seismicity in the URG area is classified as moderate but not null. Expected velocities and strain rates are very low (relative velocities lower than 0.1mm/yr). The research is actually based on data of GNSS (Global Navigation Satellite Systems). A highly precise and highly sensitive geodetic network of permanently operating GNSS sites region has been established in the URG region in order to detect recent short-term (data base starting in year 2002) crustal movements based on displacements of GNSS sites. The

  14. Technology images and concepts of technology in transition. An analysis in the philosophy of technology and general technology; Technikbilder und Technikkonzepte im Wandel. Eine technikphilosophische und allgemeintechnische Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Banse, G. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (DE). Inst. fuer Technikfolgen-Abschaetzung und Systemanalyse (ITAS); Meier, B. [Potsdam Univ. (Germany). Inst. fuer Arbeitslehre/Technik; Wolffgramm, H. (eds.)

    2002-02-01

    This volume contains contributions resulting from an expert discussion on 'Technology Images and Concepts of Technology in Transition - an analysis in the philosophy of technology and general technology. This expert discussion took place on 6 October 2000 at the State Pedagogical Institute Brandenburg in Ludwigsfelde-Struveshof and was conceived and organized co-operatively by the Forschungszentrum Karlsruhe, Institute for Technology Assessment and Systems Analysis, the University of Potsdam, Institute for the Theory of Work/Technology and Professor Horst Wolffgramm, Frankfurt (Oder). It was the aim of the expert discussion to compile, compare and relate the various positions in the philosophy of technology, general technology science, the history of technology and the didactics of technology of the 'conceptualisation' of technology as a basis for generally understanding technology or for a scientifically based 'image of technology' to each other, and then to make them accessible for curricula within a framework of conceiving general technical education at all school levels. The contributions are grouped according to the two main foci of the event: On the one hand they are concerned with determining a contemporary concept of technology ('Image of technology'). One of the aims is to characterize technological change from the historical-genetic perspective and in this way to access technology as a work of mankind, as an important element of our culture. At the same time it is necessary to forecast future developments or to make future paths of development visible to enable the indication of change by basic innovations. Second, on this basis and supported by educational theory, conclusions are drawn for future-oriented technical general education for all students. The main focus in this is on the linkage between goals, content and subject-specific methods. In order to enable the determination of competence of any individual

  15. High pressure spherical gasholder in Baden-Baden - moving instead of demolition and reconstruction; Hochdruck-Kugelgasbehaelter Baden-Baden - Verschiebung statt Abbruch und Neubau

    Energy Technology Data Exchange (ETDEWEB)

    Grohmann, W. [Thyssen Kloenne GmbH, Duisburg (Germany); Heike, T.; Marhoefer, R. [TUEV Sueddeutschland GmbH, Mannheim (Germany); Mueller, A. [Stadtwerke Baden-Baden (Germany)

    2000-07-01

    In connection with the extension of the high speed train section Karlsruhe-Basel, the public utility company in Baden-Baden had to face the necessity of clearing the area of its work site, situated directly to the west of the railway line. Instead of - as considered at first - the demolition of the existing high-pressure spherical gasholder and the construction of a new one at a different site, the 600 t heavy gasholder was moved about 40 m to about the middle of the work site - certainly an unusual measure for an object of this kind and size. Thyssen Kloenne GmbH, in cooperation with TUeV Sueddeutschland was entrusted with the planning and the realization of the project. In June of 1994 the gasholder had been switched off, and was again available to the public utility company from mid-December on. The building operations on the site, including the device specially built for the move, had taken up about five months, the assembly of the device lasted three weeks and the move of the gasholder to its new location lasted three days. If, without a doubt, the preservation of the gasholder was an ecological advantage, then the moving turned out to also be the better economic solution, because of the significantly lower total cost compared to the cost for demolition and reconstruction. The final inspection by the TUeV, compared to the results of recurring inspections carried out rotationally, three before and three after - of which the last one was carried out in May of this year - confirmed the unchanged perfect technical condition of the gasholder. (orig.) [German] In Verbindung mit dem Ausbau der Schnellbahnstrecke Karlsruhe-Basel standen die Stadtwerke Baden-Baden vor der Notwendigkeit, einen Teil ihres direkt westlich der Bahnlinie gelegenen Betriebsgelaendes zu raeumen. Aus dem zunaechst ins Auge gefasstem Abbruch des dort stehenden HD-Kugelgasbehaelters und dem Bau eines neuen Behaelters auf einem anderen Gelaende wurde die Verschiebung des ca. 600 t schweren

  16. Research and development activities at INE concerning corrosion of final repository container materials; F and E-Arbeiten zur Korrosion von Endlager-Behaelterwerkstoffen im INE

    Energy Technology Data Exchange (ETDEWEB)

    Kienzler, Bernhard

    2017-10-01

    The present work provides a historical overview of the research and development activities carried out at the (Nuclear) Research Center Karlsruhe (today KIT) since the beginning of the 1980s on the corrosion of materials which might be suitable for construction of containers for highly radioactive wastes. The report relates almost exclusively to the work performed by Dr. Emmanuel Smailos, who elaborated the corrosion of various materials at the Institute for Nuclear Waste Disposal (INE). The requirements for the containers and materials, which were subject to changes in time, are presented. The changes were strongly influenced by the changed perception of the use of nuclear energy. The selection of the materials under investigations, the boundary conditions for the corrosion experiments and the analytical methods are described. Results of the corrosion of the materials such as finegrained steel, Hastelloy C4, nodular cast iron, titanium-palladium and copper or copper-nickel alloys in typical salt solutions are summarized. The findings of special investigations, e.g. corrosion under irradiation or the influence of sulfide on the corrosion rates are shown. For construction of disposal canisters, experiments were conducted to determine the contact corrosion, the influence of the hydrogen embrittlement of Ti-Pd and fine-grained steels on the corrosion behavior as well as the corrosion behavior of welding and the influence of different welding processes with the resulting heat-affected zones on the corrosion behavior. The work was contributed to several European research programs and was well recognized in the USA. Investigations on the corrosion of steels in non-saline solutions and corrosion under interim storage conditions as well as under the expected conditions of the Konrad repository for low-level radioactive wastes are also described. In addition, the experiments on ceramic materials are presented and the results of the corrosion of Al{sub 2}O{sub 3} and Zr

  17. Modelling and mapping of spatial differentiated impacts of nitrogen input to ecosystems within the framework of the UNECE-Convention of Air Pollution Prevention. Part IV. The impact of anthropogenous nitrogen deposition on the diversity and functionality of soil organisms; Modellierung und Kartierung raeumlich differenzierter Wirkungen von Stickstoffeintraegen in Oekosysteme im Rahmen der UNECE-Luftreinhaltekonvention. Teilbericht IV. Der Einfluss anthropogener Stickstoffeintraege auf die Diversitaet und Funktion von Bodenorganismen

    Energy Technology Data Exchange (ETDEWEB)

    Birkhofer, Klaus; Wolters, Volkmar [Giessen Univ. (Germany). Inst. fuer Tieroekologie

    2010-03-15

    Semi-natural ecosystems are exposed to high atmospheric deposition for decades. In contrary to sulphur deposition which could be significantly reduced due to international conventions on air pollution prevention during the last decades, deposition of both, reduced and oxidized nitrogen is still on a very high level in average 40 kg N ha{sup -1} yr{sup -1} in forest ecosystems in Germany. The FuE-Project ''Modelling and mapping of spatial differentiated impacts of nitrogen input to ecosystems within the framework of the UNECE - Convention of Air Pollution Prevention'' was jointly conducted by 4 partner institutions and studied impacts of atmospheric nitrogen deposition and climate change on physicochemical properties of forest soils, nutrient storage and nutrient export (Karlsruhe Research Centre, IMK-IFU) as well as biodiversity of vegetation (OeKO-DATA and Waldkundeinstitut Eberswalde) and soil organisms (Giessen University). Work carried out at Institute of Animal Ecology (Justus Liebig University Giessen) focused on a Meta-Analysis about the impact of N-deposition on the diversity of soil organisms. Based on 1457 relevant publications soil organisms are threatened most in semi-natural ecosystems and experimental increases of nitrogen reduced soil organism diversity in forest ecosystems. Fungi communities were affected most seriously, with a strong decline of diversity in Mycorrhiza communities in response to experimental nitrogen addition. If N-deposition generally affects soil fauna and bacterial communities remains unclear, as the database is either too small or as results are not unequivocal. Those limitations are also present summarizing the impact of N-deposition on functions and services provided by soil organisms, the current literature database does not provide enough results to predict the impact of N-deposition on decomposition processes and nutrient cycling in soils. (orig.)

  18. Determination of PM{sub 10} deposition based on antimony flux to selected urban surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Langner, Marcel, E-mail: marcel.langner@geo.hu-berlin.de [Geography Department, Humboldt-Universitaet zu Berlin, Unter den Linden 6, 10099 Berlin (Germany); Kull, Martin, E-mail: martin.kull@kit.edu [Institute of Geography and Geoecology, Karlsruhe Institute of Technology, P.O. Box 6980, 76049 Karlsruhe (Germany); Endlicher, Wilfried R., E-mail: wilfried.endlicher@geo.hu-berlin.de [Geography Department, Humboldt-Universitaet zu Berlin, Unter den Linden 6, 10099 Berlin (Germany)

    2011-08-15

    Deposition of PM{sub 10} particles to several types of urban surfaces was investigated within this study. Antimony was chosen as a tracer element to calculate dry deposition velocities for PM{sub 10}, since antimony proved to be present almost exclusively in PM{sub 10} particles in ambient urban air. During 18 months, eight sampling sites in Berlin and Karlsruhe, two cities in Germany, were operated. PM{sub 10} concentrations and dry deposition were routinely sampled as two week averages. Additionally, leaf-samples were collected at three sites with tall vegetation. The obtained deposition velocities ranged from 0.8 to 1.3 cm s{sup -1} at roadside sites and from 0.4 to 0.5 cm s{sup -1} at the other sites. With reference to the whole canopy, additional deposition velocities of about 0.5 cm s{sup -1} were obtained for leaf surfaces. As a consequence, it can be concluded that vegetation-covered areas beside streets show the highest potential to capture particles in urban areas. - Highlights: > Deposition velocities of PM{sub 10} were determined using Sb as a tracer element. > Dry PM{sub 10} deposition velocities ranged from 0.8 to 1.3 cm s{sup -1} at roadside sites. > Dry PM{sub 10} deposition velocities ranged from 0.4 to 0.5 cm s{sup -1} at other urban sites. > Additional deposition velocities of 0.5 cm s{sup -1} were obtained for leaf surfaces. - Antimony is used as a tracer element to calculate dry deposition velocities of PM{sub 10} particles to selected urban surfaces.

  19. Energy policy responses to the climate change challenge: The consistency of European CHP, renewables and energy efficiency policies

    Energy Technology Data Exchange (ETDEWEB)

    Grohnheit, P.E.

    1999-09-01

    the Fraunhofer Institute for Systems and Innovation Research, Karlsruhe (FhG-ISI). (au)

  20. MIPAS IMK/IAA carbon tetrachloride (CCl4 retrieval and first comparison with other instruments

    Directory of Open Access Journals (Sweden)

    E. Eckert

    2017-07-01

    Full Text Available MIPAS thermal limb emission measurements were used to derive vertically resolved profiles of carbon tetrachloride (CCl4. Level-1b data versions MIPAS/5.02 to MIPAS/5.06 were converted into volume mixing ratio profiles using the level-2 processor developed at Karlsruhe Institute of Technology (KIT Institute of Meteorology and Climate Research (IMK and Consejo Superior de Investigaciones Científicas (CSIC, Instituto de Astrofísica de Andalucía (IAA. Consideration of peroxyacetyl nitrate (PAN as an interfering species, which is jointly retrieved, and CO2 line mixing is crucial for reliable retrievals. Parts of the CO2 Q-branch region that overlap with the CCl4 signature were omitted, since large residuals were still found even though line mixing was considered in the forward model. However, the omitted spectral region could be narrowed noticeably when line mixing was accounted for. A new CCl4 spectroscopic data set leads to slightly smaller CCl4 volume mixing ratios. In general, latitude–altitude cross sections show the expected CCl4 features with highest values of around 90 pptv at altitudes at and below the tropical tropopause and values decreasing with altitude and latitude due to stratospheric decomposition. Other patterns, such as subsidence in the polar vortex during winter and early spring, are also visible in the distributions. The decline in CCl4 abundance during the MIPAS Envisat measurement period (July 2002 to April 2012 is clearly reflected in the altitude–latitude cross section of trends estimated from the entire retrieved data set.

  1. Cloud characterization using a particle-counter dropsonde

    Science.gov (United States)

    Ulanowski, Zbigniew; Kaye, Paul Henry; Hirst, Edwin; Wieser, Andreas; Stanley, Warren

    2015-04-01

    Routine meteorological data is obtained in the atmosphere using disposable radiosondes, giving temperature, pressure, humidity and wind speed. Additional measurements are obtained from dropsondes, released from research aircraft. However, a crucial property not yet measured is the size and concentration of atmospheric particulates, including cloud particles or aerosols. Instead, indirect measurements are employed, relying on remote sensing. In addition, research aircraft can be used in situ, but airborne measurements are expensive, and aircraft use is restricted to near-horizontal profiling, which can be a limitation, as phenomena such convection develop in the vertical direction. The Centre for Atmospheric and Instrumentation Research at University of Hertfordshire develops light-scattering instruments for the characterization of aerosols and cloud particles. Recently a range of low-cost, miniature particle counters has been created, intended for use with systems such as disposable balloon-borne radiosondes, dropsondes, or in dense ground-based sensor networks. Versions for different particle size ranges exist. They have been used for vertical profiling of aerosols such as mineral dust or volcanic ash. However, a disadvantage of optical particle counters that sample through a narrow inlet is that they can become blocked, which can happen in a cloud, for example. Hence, a different counter version has been developed, which can have open-path geometry, as the sensing zone is defined optically rather than being delimited by the flow system. This counter is currently being used by the UK Met Office in a ground-based fog monitoring network. It has also been adapted for use with radiosondes or dropsondes. The dropsonde version has been successfully tested by launching it from research aircraft together with the so-called KITsonde, developed at the Karlsruhe Institute of Technology, which determines standard meteorological variables and GPS position for transmission back

  2. Dust layer profiling using an aerosol dropsonde

    Science.gov (United States)

    Ulanowski, Zbigniew; Kaye, Paul Henry; Hirst, Edwin; Wieser, Andreas; Stanley, Warren

    2015-04-01

    Routine meteorological data is obtained in the atmosphere using disposable radiosondes, giving temperature, pressure, humidity and wind speed. Additional measurements are obtained from dropsondes, released from research aircraft. However, a crucial property not yet measured is the size and concentration of atmospheric particulates, including dust. Instead, indirect measurements are employed, relying on remote sensing, to meet the demands from areas such as climate research, air quality monitoring, civil emergencies etc. In addition, research aircraft can be used in situ, but airborne measurements are expensive, and aircraft use is restricted to near-horizontal profiling, which can be a limitation, as phenomena such as long-range transport depend on the vertical distribution of aerosol. The Centre for Atmospheric and Instrumentation Research at University of Hertfordshire develops light-scattering instruments for the characterization of aerosols and cloud particles. Recently a range of low-cost, miniature particle counters has been created, intended for use with systems such as disposable balloon-borne radiosondes, dropsondes, or in dense ground-based sensor networks. Versions for different particle size ranges exist. They have been used for vertical profiling of aerosols such as mineral dust or volcanic ash. A disadvantage of optical particle counters that sample through a narrow inlet is that they can become blocked, which can happen in cloud, for example. Hence, a different counter version has been developed, which can have open-path geometry, as the sensing zone is defined optically rather than being delimited by the flow system. This counter has been used for ground based air-quality monitoring around Heathrow airport. The counter has also been adapted for use with radiosondes or dropsondes. The dropsonde version has been successfully tested by launching it from research aircraft together with the so-called KITsonde, developed at the Karlsruhe Institute of

  3. Stratospheric Profiling of HDO from Far InfraRed Limb Measurements by TELIS

    Science.gov (United States)

    Xu, Jian; Schreier, Franz; Doicu, Adrian; Trautmann, Thomas; Birk, Manfred; Wagner, Georg

    2016-08-01

    Water vapour is the dominant greenhouse gas in the troposphere and has been increasing in the stratosphere as well. It is generally believed that stratospheric water vapor affects ozone chemistry in the stratosphere. HDO, one of the rare isotopologues, has been recently monitored by several operational satellite instruments by detecting thermal emission in the infrared and microwave range.The balloon-borne TELIS (TErahertz and submillimeter LImb Sounder) instrument has been cooperatively developed by a consortium of European institutes, i.e. DLR (German Aerospace Center), SRON (Netherlands Institute for Space Research), and RAL (Rutherford Appleton Laboratory). Together with MIPAS-B and mini-DOAS operated by KIT (Karlsruhe Institute of Technology) and Heidelberg University, respectively, TELIS was installed on a stratospheric balloon gondola and has participated in four scientific campaigns since 2009. The high spectral resolution spectrometer TELIS allows the vertical information of the rare isotopologues between about 10 and 40 km by resolving power of individual lines. The concentration profile of HDO in the upper troposphere and lower stratosphere can be observed by both the 1.8 THz (far infrared) channel and the 480-650 GHz (submillimeter) channel. For the far infrared frequency channel, the HDO product is retrieved from the 1818.50 GHz transition. We make use of the retrieval code PILS (Profile Inversion for Limb Sounding) to carry out the inversion and to assess the accuracy of the retrieval product.In this work, we present the HDO retrievals from the 2009-2011 winter polar campaigns. The outcome of this comparison helps us to better understand the measurement capabilities of the TELIS instrument and to make contribution to cross-validation of these spaceborne sensors.

  4. MIPAS IMK/IAA carbon tetrachloride (CCl4) retrieval and first comparison with other instruments

    Science.gov (United States)

    Eckert, Ellen; von Clarmann, Thomas; Laeng, Alexandra; Stiller, Gabriele P.; Funke, Bernd; Glatthor, Norbert; Grabowski, Udo; Kellmann, Sylvia; Kiefer, Michael; Linden, Andrea; Babenhauserheide, Arne; Wetzel, Gerald; Boone, Christopher; Engel, Andreas; Harrison, Jeremy J.; Sheese, Patrick E.; Walker, Kaley A.; Bernath, Peter F.

    2017-07-01

    MIPAS thermal limb emission measurements were used to derive vertically resolved profiles of carbon tetrachloride (CCl4). Level-1b data versions MIPAS/5.02 to MIPAS/5.06 were converted into volume mixing ratio profiles using the level-2 processor developed at Karlsruhe Institute of Technology (KIT) Institute of Meteorology and Climate Research (IMK) and Consejo Superior de Investigaciones Científicas (CSIC), Instituto de Astrofísica de Andalucía (IAA). Consideration of peroxyacetyl nitrate (PAN) as an interfering species, which is jointly retrieved, and CO2 line mixing is crucial for reliable retrievals. Parts of the CO2 Q-branch region that overlap with the CCl4 signature were omitted, since large residuals were still found even though line mixing was considered in the forward model. However, the omitted spectral region could be narrowed noticeably when line mixing was accounted for. A new CCl4 spectroscopic data set leads to slightly smaller CCl4 volume mixing ratios. In general, latitude-altitude cross sections show the expected CCl4 features with highest values of around 90 pptv at altitudes at and below the tropical tropopause and values decreasing with altitude and latitude due to stratospheric decomposition. Other patterns, such as subsidence in the polar vortex during winter and early spring, are also visible in the distributions. The decline in CCl4 abundance during the MIPAS Envisat measurement period (July 2002 to April 2012) is clearly reflected in the altitude-latitude cross section of trends estimated from the entire retrieved data set.

  5. Validation of the Harvard Lyman-α in situ water vapor instrument: Implications for the mechanisms that control stratospheric water vapor

    Science.gov (United States)

    Weinstock, E. M.; Smith, J. B.; Sayres, D. S.; Pittman, J. V.; Spackman, J. R.; Hintsa, E. J.; Hanisco, T. F.; Moyer, E. J.; St. Clair, J. M.; Sargent, M. R.; Anderson, J. G.

    2009-12-01

    Building on previously published details of the laboratory calibrations of the Harvard Lyman-α photofragment fluorescence hygrometer (HWV) on the NASA ER-2 and WB-57 aircraft, we describe here the validation process for HWV, which includes laboratory calibrations and intercomparisons with other Harvard water vapor instruments at water vapor mixing ratios from 0 to 10 ppmv, followed by in-flight intercomparisons with the same Harvard hygrometers. The observed agreement exhibited in the laboratory and during intercomparisons helps corroborate the accuracy of HWV. In light of the validated accuracy of HWV, we present and evaluate a series of intercomparisons with satellite and balloon borne water vapor instruments made from the upper troposphere to the lower stratosphere in the tropics and midlatitudes. Whether on the NASA ER-2 or WB-57 aircraft, HWV has consistently measured about 1-1.5 ppmv higher than the balloon-borne NOAA/ESRL/GMD frost point hygrometer (CMDL), the NOAA Cryogenic Frost point Hygrometer (CFH), and the Microwave Limb Sounder (MLS) on the Aura satellite in regions of the atmosphere where water vapor is <10 ppmv. Comparisons in the tropics with the Halogen Occultation Experiment (HALOE) on the Upper Atmosphere Research Satellite show large variable differences near the tropopause that converge to ˜10% above 460 K, with HWV higher. Results we show from the Aqua Validation and Intercomparison Experiment (AquaVIT) at the AIDA chamber in Karlsruhe do not reflect the observed in-flight differences. We illustrate that the interpretation of the results of comparisons between modeled and measured representations of the seasonal cycle of water entering the lower tropical stratosphere is dictated by which data set is used.

  6. Distributed sounding of the boundary layer using multiple unmanned aerial systems during the ScaleX campaign 2016

    Science.gov (United States)

    Philipp, Andreas; Petersen, Erik; Groos, Alexander; Ferenci, Pia; Engerer, Stefan; Fiedler, Benedikt; Emeis, Stefan; Schäfer, Klaus; Brosy, Caroline; Zeeman, Matthias; Jacobeit, Jucundus

    2017-04-01

    In order to observe and better understand micro scale processes of interaction between the surface and the atmosphere and to relate them to meso and macro scale processes, an intensive measurement campaign at the TERENO (Terrestrial Environmental Observatories) site Fendt in southern Germany was organized in summer 2016 by IMK-IFU (Institute of Meteorology and Climate Research - Atmospheric Environmental Research) / KIT (Karlsruher Institute for Technology) under participation of a large number of cooperation partners. While several ground based remote sensing systems were implemented beside already installed long-term observing instruments for turbulence, soil moisture, trace gas emission etc., several flight campaigns with unmanned aerial systems took place. IGUA (Institute for Geography at the Universiy of Augsburg) contributed with spiral profile flights up to 1000 meters above ground level simultaneously at five locations, covering an 1 km x 1 km large area, corresponding to a WRF (Weather and Research Forecast model) grid box. Starting in the afternoon of 6th of July and ending in the morning of 7th of July each full hour an ascent was launched. While there were several technical problems leading to missing values, an all together useful dataset was produced covering the distribution of temperature, humidity and wind for the diurnal cycle. The contribution presents the interpretation of the profiles in respect to stratification of the planetary boundary layer and comparison to the cooperated instruments. An interesting aspect of the observation data is the modification of the wind field by an nearby terrain step which also influences cold air flow near the ground. These observations are compared to mesoscale model data (METRAS and later WRF) in order to check whether the principle mechanisms can be simulated.

  7. Modelling and simulation of new generation powerful gyrotrons for the fusion research

    Energy Technology Data Exchange (ETDEWEB)

    Sabchevski, S [Institute of Electronics, Bulgarian Academy of Sciences, BG-1784 Sofia (Bulgaria); Zhelyazkov, I [Faculty of Physics, Sofia University, BG-1164 Sofia (Bulgaria)

    2007-04-15

    One of the important issues related with the cyclotron resonance heating (CRH) and current drive of fusion plasmas in thermonuclear reactors (tokamaks and stellarators) is the development of multi-megawatt class gyrotrons. There are generally three stages of the implementation of that task, notably (i) elaborating a novel generation of software tools for the physical modelling and simulation of such kind of gyrotrons, (ii) their computer aided design (CAD) and construction on the basis of the simulation's results, and finally, (iii) gyrotrons' testing in real experimental conditions. This tutorial paper concerns the first item-the development of software tools. In co-operation with the Institute for Pulsed Power and Microwave Technology at the Forschungszentrum Karlsruhe, Germany, and Centre de Recherches en Physique des Plasmas at Ecole Polytechnique Federale de Lausanne, Switzerland, we work on the conceptual design of the software tools under development. The basic conclusions are that the numerical codes for gyrotrons' modelling should possess the following essential characteristics: (a) portability, (b) extensibility, (c) to be oriented toward the solution of practical problems (i.e., elaborating of computer programs that can be used in the design process), (d) to be based on self-consistent 3D physical models, which take into account the departure from axial symmetry, and (e) ability to simulate time dependent processes (electrostatic PIC simulation) alongside with a trajectory analysis (ray tracing simulation). Here, we discuss how various existing numerical codes have to be improved and implemented via the advanced programming technologies for state-of-the-art computer systems including clusters, grid, parallel platforms, and supercomputers.

  8. Modelling and mapping of spatial differentiated impacts of nitrogen input to ecosystems within the framework of the UNECE-Convention of Air Pollution Prevention. Part III. Modelling the effects of N-deposition on the biodiversity of plant communities in temperate forests; Modellierung und Kartierung raeumlich differenzierter Wirkungen von Stickstoffeintraegen in Oekosysteme im Rahmen der UNECE-Luftreinhaltekonvention. Teilbericht III. Modellierung der Wirkung der Stickstoff-Deposition auf die biologische Vielfalt der Pflanzengesellschaften von Waeldern der gemaessigten Breiten

    Energy Technology Data Exchange (ETDEWEB)

    Jenssen, Martin [Waldkunde-Institut Eberswalde GmbH - W.I.E., Bad Freienwalde (Oder) (Germany)

    2010-03-15

    Semi-natural ecosystems are exposed to high atmospheric deposition for decades. In contrary to sulphur deposition which could be significantly reduced due to international conventions on air pollution prevention during the last decades, deposition of both, reduced and oxidized nitrogen is still on a very high level in average 40 kg N ha{sup -1} yr{sup -1} in forest ecosystems in Germany. The FuE-Project ''Modelling and mapping of spatial differentiated impacts of nitrogen input to ecosystems within the framework of the UNECE - Convention of Air Pollution Prevention'' was jointly conducted by 4 partner institutions and studied impacts of atmospheric nitrogen deposition and climate change on physico-chemical properties of forest soils, nutrient storage and nutrient export (Karlsruhe Research Centre, IMK-IFU) as well as biodiversity of vegetation (OeKO-DATA and Institute for Forest Science Eberswalde) and soil organisms (Giessen University). Work carried out at the Institute for Forest Science Eberswalde concentrated on modeling the effect of N-deposition on plant biodiversity in forests of the Northeast German lowlands. The model approach is based on 722 probability density functions modeling the distribution of about 400 plant species over chemical top-soil parameters C/N-ratio and pH-value. On this base an indicator value model was developed and applied to the analysis of forest vegetation dynamics due to N-deposition-induced top soil dynamics since the middle of the last century. Threshold values for deposition-induced changes of top soil were derived for most important forest ecosystems types on sites not influenced by ground water. These threshold values correspond to four different classes of endangering of plant biodiversity. Coupling with the biogeochemical process model of IMK-IFU yielded projections of endangering of plant biodiversity for selected forest sites up to the year 2050. (orig.)

  9. Fluid-dynamic modeling of the human left ventricle: methodology and application to surgical ventricular reconstruction.

    Science.gov (United States)

    Doenst, Torsten; Spiegel, Kathrin; Reik, Michael; Markl, Michael; Hennig, Jürgen; Nitzsche, Stefan; Beyersdorf, Friedhelm; Oertel, Herbert

    2009-04-01

    The efficacy of surgical ventricular reconstruction (SVR) for ischemic cardiomyopathy has never been truly quantified. Methods to assess ventricular flow have not been applied to these patients. The objective is to develop a volume-independent technique for assessing the effects of ischemic remodeling and SVR on left ventricular blood flow dynamics. Cardiac magnetic resonance images from a healthy volunteer and from a patient before and after SVR were segmented and transformed to generate a grid model of the heart by generating numeric grids and running third-order approximations to achieve 850 grid images per cardiac cycle. These grids formed the skeletal structure of our patient-specific time-dependent ventricular geometry model, the Karlsruhe Heart Model, used for modeling fluid dynamics. We modeled flow, ejection fraction, and blood washout from the ventricle. The model was validated using a silicone ventricle and mock circulation. In the healthy heart and before SVR, ejection fractions were 0.61 and 0.15 and left ventricular volumes were 166 mL and 175 mL, respectively. Surgical ventricular reconstruction decreased left ventricular volume by one fourth. Postoperative ejection fraction was 0.18 in the patient. Post-SVR shape was more spherical than preoperatively and also more spherical than the healthy heart. Ventricular flow patterns in the patient were significantly altered by SVR. However, fluid washout from the ventricle was similar before and after SVR but worse than in the healthy heart. Fluid dynamic modeling of the heart is possible based on cardiac magnetic resonance imaging data and enables volume-independent quantitative assessment of the surgical procedure. In the future, preoperative modeling for patients with remodeled ventricles may help to achieve optimized post-SVR flow characteristics and potentially outcomes.

  10. European commission research activities on iodine

    Energy Technology Data Exchange (ETDEWEB)

    Loggia, E. della [European Commission, Brussels (Belgium)

    1996-12-01

    The research on iodine, as on other important fission products which would be released during a severe accident, carried out directly or organized by the European Commission stems from the Euratom Treaty, namely from Chapter III of the treaty which deals with the protection of the health of the population against radiations and from Chapter I which deals with research. In this paper we do not consider the Commission radiological protection programme: we limit ourselves to the presentation of the research carried out on Iodine as part of the most recent source term studies within the framework Programmes as are called the research programme of the European Commission, usually valid for a 4 year periods. The research activities are carried out by the European Commission either directly through the Joint Research Centres (JRC) or indirectly through collaboration with research organizations of Member States. Concerning the iodine research carried out as Direct Action in the Joint Research Centres, are mentioned here the most relevant activities carried out in this field at the JRC of Ispra and Karlsruhe (TUI). As Indirect Action, we present here the results of some studies allocated by the European Commission to experts of research organizations of Member Countries, followed by a short description of the main results achieved by the Reinforced Concerted Action, within the III Framework Programme (1992-1995). At the end of the paper are described the research on iodine being carried out or proposed within the IV Framework Programme (1995-1998). Mention is also done of the Commission participation, relevant in terms of financial and human efforts, to the PHEBUS FP Project. (author) refs.

  11. Comparison of simulations with two mesoscale models, the MIUU model and the KAMM model, using two low-level jet cases over the Baltic Sea

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, M. [Laensstyrelsen (County Board), Falun (Sweden)

    1997-07-01

    Two mesoscale models, the MIUU model (developed at the Department of meteorology at the Uppsala University, Sweden) and the KAMM model (developed at the `Institut fuer Meteorologie und Klimaforschung der Universitaet Karlsruhe`, Germany), have been compared using two low-level jet cases over the Baltic Sea. The MIUU model is three-dimensional hydrostatic and contains a `level-2.5` higher order closure scheme. The KAMM model is also three-dimensional, but non-hydrostatic and uses a first-order closure scheme. The models have been applied on two well-documented Baltic-Sea low-level jet cases. The first one is quite steady and shows only small differences in the wind field during the first half of the simulated day. The second one is completely unstationary, with low-level jets arising and disappearing during both of the simulated days. In the simulations, described here, it has been shown that both models are able to simulate the Baltic Sea low-level jet. Both models confirm the contention that the Baltic-Sea low-level jets indeed exist. As regards the realistic simulation of such low-level jet situations, a higher-order closure scheme such as in the MIUU model seems to be more suitable. The author believes that in the two cases, studied here, the hydrostatic approximation, which is used in the MIUU model but not in KAMM, should not have any influence on the wind field over the Baltic Sea. The differences in the wind field over the Baltic Sea should rather be caused by the different turbulence parameterization schemes, as described in the following 55 refs, 47 figs, 6 tabs

  12. KIT safety management. Annual report 2013; KIT-Sicherheitsmanagement. Jahresbericht 2013

    Energy Technology Data Exchange (ETDEWEB)

    Frank, Gerhard (ed.)

    2014-07-01

    The KIT Safety Management Service Unit (KSM) guarantees radiological and conventional technical safety and security of Karlsruhe Institute of Technology and controls the implementation and observation of legal environmental protection requirements. KSM is responsible for licensing procedures, industrial safety organization, control of environmental protection measures, planning and implementation of emergency preparedness and response, operation of radiological laboratories and measurement stations, extensive radiation protection support and the execution of security tasks in and for all organizational units of KIT. Moreover, KSM is in charge of wastewater and environmental monitoring for all facilities and nuclear installations all over the KIT campus. KSM is headed by the Safety Commissioner of KIT, who is appointed by the Presidential Committee. Within his scope of procedure for KIT, the Safety Commissioner controls the implementation of and compliance with safety-relevant requirements. The KIT Safety Management is certified according to DIN EN ISO 9001, its laboratories are accredited according to DIN EN ISO/IEC 17025. To the extent possible, KSM is committed to maintaining competence in radiation protection and to supporting research and teaching activities. The present reports lists the individual tasks of the KIT Safety Management and informs about the results achieved in 2013. Status figures in principle reflect the status at the end of the year 2013. The processes described cover the areas of competence of KSM. Due to changes in the organization of the infrastructural service units in KIT, KSM has been cancelled at the end of 2013. Its tasks will mainly be covered in 2014 by the new founded service unit Safety and Environmental (Sicherheit und Umwelt, SUM). The departments Campus Security, Fire Brigade and Information Technology have been transferred to the Service Unit General Services (Allgemeine Services, ASERV).

  13. Transfer of adapted water supply technologies through a demonstration and teaching facility

    Science.gov (United States)

    Nestmann, F.; Oberle, P.; Ikhwan, M.; Stoffel, D.; Blaß, H. J.; Töws, D.; Schmidt, S.

    2016-09-01

    Water scarcity can be defined as a lack of sufficient water resources or as the limited or even missing access to a safe water supply. Latter can be classified as `economic water scarcity' which among others can commonly be met in tropical and subtropical karst regions of emerging and developing countries. Karst aquifers, mostly consisting of limestone and carbonate rock, show high infiltration rates which leads to a lack of above ground storage possibilities. Thus, the water will drain rapidly into the underground and evolve vast river networks. Considering the lack of appropriate infrastructure and limited human capacities in the affected areas, these underground water resources cannot be exploited adequately. Against this, background innovative and adapted technologies are required to utilize hard-to-access water resources in a sustainable way. In this context, the German-Indonesian joint R&D project "Integrated Water Resources Management (IWRM) Indonesia" dealt with the development of highly adaptable water technologies and management strategies. Under the aegis of the Karlsruhe Institute of Technology (KIT) and funded by the German Ministry of Education and Research (BMBF), these innovative technical concepts were exemplarily implemented to remedy this deficiency in the model region Gunung Sewu, a karst area situated on the southern coast of Java Island, Indonesia. The experiences gained through the interdisciplinary joint R&D activities clearly showed that even in the case of availability of appropriate technologies, a comprising transfer of knowhow and the buildup of capabilities (Capacity Development) is inevitable to sustainably implement and disseminate new methods. In this context, an adapted water supply facility was developed by KIT which hereafter shall serve for demonstration, teaching, and research purposes. The plant's functionality, its teaching and research concept, as well as the design process, which was accomplished in collaboration with the

  14. [First Insights into Scope of Practice and Salary of Physician Assistants, A New Healthcare Profession, in Germany].

    Science.gov (United States)

    Marschall, Tanja; Hoffmann, Marcus

    2017-05-29

    Background In 2010, the first government-approved physician assistant (PA) program was introduced at the Baden-Wuerttemberg Cooperative State University Karlsruhe (DHBW). There are not sufficient data regarding the scope of practice and salary of our graduates. Therefore, the aim of the present study was to obtain information regarding these. Methods The survey included all graduates (2 classes, n=27). A specific questionnaire was developed, including 37 questions e. g. on the current employment status, scope of practice, salary and job satisfaction regarding the PA program and career. A descriptive analysis of the data was carried out using SPSS. Results 25 graduates participated in the survey (96.1%); the average age of participants was 32.2 years (25-53 years). 88% (n=22) were employed as a PA, most of them worked in internal medicine (n=11) or surgery (n=9). Responsibilities that are often or very often assigned to the PAs are preparing final documents, taking over a coordinating role in the therapeutic team, as well as participation in taking patient medical history and conducting physical examinations. In two-thirds of respondents, the gross monthly base salary (full-time position) was about 3000 euros. 77.3% (n=17) of graduates were generally satisfied or very satisfied with their current situation. Conclusions It appears that graduates of the DHBW are well integrated into the staff structure of hospitals, as far as the scope of practice and average salary are concerned. Further studies on the integration of this new profession in Germany and on their extended scope of practice in comparison to established healthcare professions will be conducted. © Georg Thieme Verlag KG Stuttgart · New York.

  15. Validation of analysis methods for assessing flawed piping subjected to dynamic loading

    Energy Technology Data Exchange (ETDEWEB)

    Olson, R.J.; Wolterman, R.L.; Wilkowski, G.M. [Battelle, Columbus, OH (United States); Kot, C.A. [Argonne National Lab., IL (United States)

    1994-08-01

    Argonne National Laboratory and Battelle have jointly conducted a research program for the USNRC to evaluate the ability of current engineering analysis methods and one state-of-the-art analysis method to predict the behavior of circumferentially surface-cracked pipe system water-hammer experiment. The experimental data used in the evaluation were from the HDR Test Group E31 series conducted by the Kernforschungszentrum Karlsruhe (KfK) in Germany. The incentive for this evaluation was that simplified engineering methods, as well as newer ``state-of-the-art`` fracture analysis methods, have been typically validated only with static experimental data. Hence, these dynamic experiments were of high interest. High-rate dynamic loading can be classified as either repeating, e.g., seismic, or nonrepeating, e.g., water hammer. Development of experimental data and validation of cracked pipe analyses under seismic loading (repeating dynamic loads) are being pursued separately within the NRC`s International Piping Integrity Research Group (IPIRG) program. This report describes developmental and validation efforts to predict crack stability under water hammer loading, as well as comparisons using currently used analysis procedures. Current fracture analysis methods use the elastic stress analysis loads decoupled from the fracture mechanics analysis, while state-of-the-art methods employ nonlinear cracked-pipe time-history finite element analyses. The results showed that the current decoupled methods were conservative in their predictions, whereas the cracked pipe finite element analyses were more accurate, yet slightly conservative. The nonlinear time-history cracked-pipe finite element analyses conducted in this program were also attractive in that they were done on a small Apollo DN5500 workstation, whereas other cracked-pipe dynamic analyses conducted in Europe on the same experiments required the use of a CRAY2 supercomputer, and were less accurate.

  16. OECD/NEA BENCHMARK FOR UNCERTAINTY ANALYSIS IN MODELING (UAM FOR LWRS – SUMMARY AND DISCUSSION OF NEUTRONICS CASES (PHASE I

    Directory of Open Access Journals (Sweden)

    RYAN N. BRATTON

    2014-06-01

    Full Text Available A Nuclear Energy Agency (NEA, Organization for Economic Co-operation and Development (OECD benchmark for Uncertainty Analysis in Modeling (UAM is defined in order to facilitate the development and validation of available uncertainty analysis and sensitivity analysis methods for best-estimate Light water Reactor (LWR design and safety calculations. The benchmark has been named the OECD/NEA UAM-LWR benchmark, and has been divided into three phases each of which focuses on a different portion of the uncertainty propagation in LWR multi-physics and multi-scale analysis. Several different reactor cases are modeled at various phases of a reactor calculation. This paper discusses Phase I, known as the “Neutronics Phase”, which is devoted mostly to the propagation of nuclear data (cross-section uncertainty throughout steady-state stand-alone neutronics core calculations. Three reactor systems (for which design, operation and measured data are available are rigorously studied in this benchmark: Peach Bottom Unit 2 BWR, Three Mile Island Unit 1 PWR, and VVER-1000 Kozloduy-6/Kalinin-3. Additional measured data is analyzed such as the KRITZ LEU criticality experiments and the SNEAK-7A and 7B experiments of the Karlsruhe Fast Critical Facility. Analyzed results include the top five neutron-nuclide reactions, which contribute the most to the prediction uncertainty in keff, as well as the uncertainty in key parameters of neutronics analysis such as microscopic and macroscopic cross-sections, six-group decay constants, assembly discontinuity factors, and axial and radial core power distributions. Conclusions are drawn regarding where further studies should be done to reduce uncertainties in key nuclide reaction uncertainties (i.e.: 238U radiative capture and inelastic scattering (n, n’ as well as the average number of neutrons released per fission event of 239Pu.

  17. Resilient FTS3 service at GridKa

    Science.gov (United States)

    Hartmann, T.; Bubeliene, J.; Hoeft, B.; Obholz, L.; Petzold, A.; Wisniewski, K.

    2015-12-01

    The FTS (File Transfer Service) service provides a transfer job scheduler to distribute and replicate vast amounts of data over the heterogeneous WLCG infrastructures. Compared to the channel model of the previous versions, the most recent version of FTS simplifies and improves the flexibility of the service while reducing the load to the service components. The improvements allow to handle a higher number of transfers with a single FTS3 setup. Covering now continent-wide transfers compared to the previous version, whose installations handled only transfers within specific clouds, a resilient system becomes even more necessary with the increased number of depending users. Having set up a FTS3 services at the German T1 site GridKa at KIT in Karlsruhe, we present our experiences on the preparations for a high-availability FTS3 service. Trying to avoid single points of failure, we rely on a database cluster as fault tolerant data back-end and the FTS3 service deployed on an own cluster setup to provide a resilient infrastructure for the users. With the database cluster providing a basic resilience for the data back-end, we ensure on the FTS3 service level a consistent and reliable database access through a proxy solution. On each FTS3 node a HAproxy instance is monitoring the integrity of each database node and distributes database queries over the whole cluster for load balancing during normal operations; in case of a broken database node, the proxy excludes it transparently to the local FTS3 service. The FTS3 service itself consists of a main and a backup instance, which takes over the identity of the main instance, i.e., IP, in case of an error using a CTDB (Cluster Trivial Database) infrastructure offering clients a consistent service.

  18. The KIT Motion-Language Dataset.

    Science.gov (United States)

    Plappert, Matthias; Mandery, Christian; Asfour, Tamim

    2016-12-01

    Linking human motion and natural language is of great interest for the generation of semantic representations of human activities as well as for the generation of robot activities based on natural language input. However, although there have been years of research in this area, no standardized and openly available data set exists to support the development and evaluation of such systems. We, therefore, propose the Karlsruhe Institute of Technology (KIT) Motion-Language Dataset, which is large, open, and extensible. We aggregate data from multiple motion capture databases and include them in our data set using a unified representation that is independent of the capture system or marker set, making it easy to work with the data regardless of its origin. To obtain motion annotations in natural language, we apply a crowd-sourcing approach and a web-based tool that was specifically build for this purpose, the Motion Annotation Tool. We thoroughly document the annotation process itself and discuss gamification methods that we used to keep annotators motivated. We further propose a novel method, perplexity-based selection, which systematically selects motions for further annotation that are either under-represented in our data set or that have erroneous annotations. We show that our method mitigates the two aforementioned problems and ensures a systematic annotation process. We provide an in-depth analysis of the structure and contents of our resulting data set, which, as of October 10, 2016, contains 3911 motions with a total duration of 11.23 hours and 6278 annotations in natural language that contain 52,903 words. We believe this makes our data set an excellent choice that enables more transparent and comparable research in this important area.

  19. Adapted hydropower-driven water supply system: assessment of an underground application in an Indonesian karst area

    Science.gov (United States)

    Oberle, P.; Ikhwan, M.; Stoffel, D.; Nestmann, F.

    2016-09-01

    Populated karst landscapes can be found all over the world, although their natural boundary conditions mostly lead to distinct challenges regarding a sustainable water supply. Especially in developing and emerging countries, this situation aggravates since appropriate technologies and water management concepts are rarely available. Against this background, the interdisciplinary, German-Indonesian joint project " Integrated Water Resources Management (IWRM) Indonesia", funded by the German Federal Ministry of Education and Research (BMBF), focused on the development and exemplary implementation of adapted techniques to remedy the partly severe water scarcity in the region Gunung Sewu. This karst area, widely known as " Java's poorhouse", is located on the southern coast of Java Island and distinctly suffers from the mentioned constraints. Under the aegis of the Karlsruhe Institute of Technology (KIT), the conceptual and technical achievements of the "IWRM Indonesia" joint research project are characterized by a high potential for multiplication not only for karst areas but also for non-karst regions. One of the project's major accomplishments is the erection of an innovative hydropower-driven water supply facility located in a karst cave 100 m below ground and continuously supplying tens of thousands of people with fresh water. Referring to the plant's innovative character and the demanding conditions on-site, the implementation was a highly iterative process leading to today's autonomous operation by an Indonesian public authority. Based on the experiences gained during design, construction, operation and monitoring phase, this paper introduces an implementation approach for adapted technologies as well as a comprising technical and economical assessment of the plant's operation.

  20. Towards a 20 kA high temperature superconductor current lead module using REBCO tapes

    Science.gov (United States)

    Heller, R.; Bagrets, N.; Fietz, W. H.; Gröner, F.; Kienzler, A.; Lange, C.; Wolf, M. J.

    2018-01-01

    Most of the large fusion devices presently under construction or in operation consisting of superconducting magnets like EAST, Wendelstein 7-X (W7-X), JT-60SA, and ITER, use high temperature superconductor (HTS) current leads (CL) to reduce the cryogenic load and operational cost. In all cases, the 1st generation HTS material Bi-2223 is used which is embedded in a low-conductivity matrix of AgAu. In the meantime, industry worldwide concentrates on the production of the 2nd generation HTS REBCO material because of the better field performance in particular at higher temperature. As the new material can only be produced in a multilayer thin-film structure rather than as a multi-filamentary tape, the technology developed for Bi-2223-based current leads cannot be transferred directly to REBCO. Therefore, several laboratories are presently investigating the design of high current HTS current leads made of REBCO. Karlsruhe Institute of Technology is developing a 20 kA HTS current lead using brass-stabilized REBCO tapes—as a further development to the Bi-2223 design used in the JT-60SA current leads. The same copper heat exchanger module as in the 20 kA JT-60SA current lead will be used for simplicity, which will allow a comparison of the newly developed REBCO CL with the earlier produced and investigated CL for JT-60SA. The present paper discusses the design and accompanying test of single tape and stack REBCO mock-ups. Finally, the fabrication of the HTS module using REBCO stacks is described.

  1. Fuel burn analysis of a sodium fast reactor with KANEXT and Serpent; Analisis de quemado de combustible de un reactor rapido de sodio con KANEXT y SERPENT

    Energy Technology Data Exchange (ETDEWEB)

    Lopez S, R. C.; Francois L, J. L., E-mail: rcarlos.lope@gmail.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico)

    2015-09-15

    The fast reactors cooled by sodium are one of the options considered in the Generation IV. Since most of the reactors of Fourth Generation are still in development stage, is necessary to have efficient and reliable computational tools, this in order to obtain accurate results in reasonable computational times. In this paper is introduced and describes the deterministic code KANEXT (KArlsruhe Neutronic EXtended Tool) and is compared against a Monte Carlo code of more diffusion: Serpent. KANEXT, being a modular code requires the interaction of different modules to perform a job, this interaction of modules is described in this article. The parameters to be compared are the results of the neutron multiplication effective factor and the evolution of isotopes during the burning. The mentioned comparison is carried out for a fast reactor cooled by sodium of relatively small size compared to commercial size reactors. In this paper the particularities of the reactor are described, important for the analysis such as geometry, enrichments, reflector, etc. The considerations in the implementation in both codes are also described, as are simplifications, length of the burning steps, possible solutions of the Bateman equations for the burning fuel in Serpent and the solution options for transport (P3) and diffusion (P1) in KANEXT. The results show good correspondence between Serpent and KANEXT, which give confidence to continue using KANEXT as the main tool. Respect to computation time, time saving is evident with the use of deterministic codes instead of Monte Carlo codes, in this particular case, the time savings using KANEXT is about 98.5% of the time used by Serpent. (Author)

  2. AZTLAN platform: Mexican platform for analysis and design of nuclear reactors; AZTLAN platform: plataforma mexicana para el analisis y diseno de reactores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Gomez T, A. M.; Puente E, F. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Del Valle G, E. [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Edif. 9, Col. San Pedro Zacatenco, 07738 Mexico D. F. (Mexico); Francois L, J. L.; Martin del Campo M, C. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico); Espinosa P, G., E-mail: armando.gomez@inin.gob.mx [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico)

    2014-10-15

    The Aztlan platform Project is a national initiative led by the Instituto Nacional de Investigaciones Nucleares (ININ) which brings together the main public houses of higher studies in Mexico, such as: Instituto Politecnico Nacional, Universidad Nacional Autonoma de Mexico and Universidad Autonoma Metropolitana in an effort to take a significant step toward the calculation autonomy and analysis that seeks to place Mexico in the medium term in a competitive international level on software issues for analysis of nuclear reactors. This project aims to modernize, improve and integrate the neutron, thermal-hydraulic and thermo-mechanical codes, developed in Mexican institutions, within an integrated platform, developed and maintained by Mexican experts to benefit from the same institutions. This project is financed by the mixed fund SENER-CONACYT of Energy Sustain ability, and aims to strengthen substantially to research institutions, such as educational institutions contributing to the formation of highly qualified human resources in the area of analysis and design of nuclear reactors. As innovative part the project includes the creation of a user group, made up of members of the project institutions as well as the Comision Nacional de Seguridad Nuclear y Salvaguardias, Central Nucleoelectrica de Laguna Verde (CNLV), Secretaria de Energia (Mexico) and Karlsruhe Institute of Technology (Germany) among others. This user group will be responsible for using the software and provide feedback to the development equipment in order that progress meets the needs of the regulator and industry; in this case the CNLV. Finally, in order to bridge the gap between similar developments globally, they will make use of the latest super computing technology to speed up calculation times. This work intends to present to national nuclear community the project, so a description of the proposed methodology is given, as well as the goals and objectives to be pursued for the development of the

  3. Model-based analyses of bioequivalence crossover trials using the stochastic approximation expectation maximisation algorithm.

    Science.gov (United States)

    Dubois, Anne; Lavielle, Marc; Gsteiger, Sandro; Pigeolet, Etienne; Mentré, France

    2011-09-20

    In this work, we develop a bioequivalence analysis using nonlinear mixed effects models (NLMEM) that mimics the standard noncompartmental analysis (NCA). We estimate NLMEM parameters, including between-subject and within-subject variability and treatment, period and sequence effects. We explain how to perform a Wald test on a secondary parameter, and we propose an extension of the likelihood ratio test for bioequivalence. We compare these NLMEM-based bioequivalence tests with standard NCA-based tests. We evaluate by simulation the NCA and NLMEM estimates and the type I error of the bioequivalence tests. For NLMEM, we use the stochastic approximation expectation maximisation (SAEM) algorithm implemented in monolix. We simulate crossover trials under H(0) using different numbers of subjects and of samples per subject. We simulate with different settings for between-subject and within-subject variability and for the residual error variance. The simulation study illustrates the accuracy of NLMEM-based geometric means estimated with the SAEM algorithm, whereas the NCA estimates are biased for sparse design. NCA-based bioequivalence tests show good type I error except for high variability. For a rich design, type I errors of NLMEM-based bioequivalence tests (Wald test and likelihood ratio test) do not differ from the nominal level of 5%. Type I errors are inflated for sparse design. We apply the bioequivalence Wald test based on NCA and NLMEM estimates to a three-way crossover trial, showing that Omnitrope®; (Sandoz GmbH, Kundl, Austria) powder and solution are bioequivalent to Genotropin®; (Pfizer Pharma GmbH, Karlsruhe, Germany). NLMEM-based bioequivalence tests are an alternative to standard NCA-based tests. However, caution is needed for small sample size and highly variable drug. Copyright © 2011 John Wiley & Sons, Ltd.

  4. Mineral vein dynamics modelling (FRACS II)

    Energy Technology Data Exchange (ETDEWEB)

    Urai, J.; Virgo, S.; Arndt, M. [RWTH Aachen (Germany); and others

    2016-08-15

    The Mineral Vein Dynamics Modeling group ''FRACS'' started out as a team of 7 research groups in its first phase and continued with a team of 5 research groups at the Universities of Aachen, Tuebingen, Karlsruhe, Mainz and Glasgow during its second phase ''FRACS 11''. The aim of the group was to develop an advanced understanding of the interplay between fracturing, fluid flow and fracture healing with a special emphasis on the comparison of field data and numerical models. Field areas comprised the Oman mountains in Oman (which where already studied in detail in the first phase), a siliciclastic sequence in the Internal Ligurian Units in Italy (closed to Sestri Levante) and cores of Zechstein carbonates from a Lean Gas reservoir in Northern Germany. Numerical models of fracturing, sealing and interaction with fluid that were developed in phase I where expanded in phase 11. They were used to model small scale fracture healing by crystal growth and the resulting influence on flow, medium scale fracture healing and its influence on successive fracturing and healing, as well as large scale dynamic fluid flow through opening and closing fractures and channels as a function of fluid overpressure. The numerical models were compared with structures in the field and we were able to identify first proxies for mechanical vein-hostrock properties and fluid overpressures versus tectonic stresses. Finally we propose a new classification of stylolites based on numerical models and observations in the Zechstein cores and continued to develop a new stress inversion tool to use stylolites to estimate depth of their formation.

  5. New Features of the re3data Registry of Research Data Repositories

    Science.gov (United States)

    Elger, K.; Pampel, H.; Vierkant, P.; Witt, M.

    2016-12-01

    re3data is a registry of research data repositories that lists over 1,600 repositories from around the world, making it the largest and most comprehensive online catalog of data repositories on the web. The registry offers researchers, funding agencies, libraries and publishers a comprehensive overview of the heterogeneous landscape of data repositories. The repositories are described, following the "Metadata Schema for the Description of Research Data Repositories". re3data summarises the properties of a repository into a user-friendly icon system helping users to easily identify an adequate repository for the storage of their datasets. The re3data entries are curated by an international, multi-disciplinary editorial board. An application programming interface (API) enables other information systems to list and fetch metadata for integration and interoperability. Funders like the European Commission (2015) and publishers like Springer Nature (2016) recommend the use of re3data.org in their policies. The original re3data project partners are the GFZ German Research Centre for Geosciences, the Humboldt-Universität zu Berlin, the Purdue University Libraries and the Karlsruhe Institute of Technology (KIT). Since 2015 re3data is operated as a service of DataCite, a global non-profit organisation that provides persistent identifiers (DOIs) for research data. At the 2016 AGU Fall Meeting we will describe the current status of re3data. An overview of the major developments and new features will be given. Furthermore, we will present our plans to increase the quality of the re3data entries.

  6. Impact of KITcube data on the prediction of maritime convective severe weather. Test for HYMEX IOP13 event.

    Science.gov (United States)

    Carrio Carrio, Diego Saul; Homar Santaner, Víctor; Corsmeier, Ulrich

    2015-04-01

    The Special Observation Period 1 (SOP1) was a great milestone reached by the HyMeX scientific community. Observations sampling on 20 cases of severe weather were taken under an unprecedented international collaboration. The nderlying objective of this campaign was to improve the knowledge of the mechanisms leading to heavy precipitation and flash flooding in the Mediterranean. One of the most active platforms during the campaign was the KITcube-observatory of Karlsruhe Institute of Technology, a mobile platform that includes ground-based remote sensors (radar and lidar) and instruments for in-situ measurements. During SOP1, the KITcube operated on the island of Corsica, providing direct observational data on severe weather occurring in the north-eastern region of the Western Mediterranean. IOP 13 occurred between 15-16 October 2012 and it was characterized by heavy rains over northern and central Italy. Storms formed over the French coastlands and over the sea, progressing eastwards across the Gulf of Genoa. The most affected areas were north-eastern Italy (160mm/24h), LiguriaTuscany (120mm/24h) and central Italy (600mm/24h). The prediction of these maritime convection driven cases is highly demanding for both operational offices and high resolution numerical models. Ensemble data assimilation methods provide the tools to combine observational and modeling information to formalize the problem of optimal use and transference of information in the initialization and integration of a forecasting system. We test the benefits offered by an Ensemble Kalman Filter (EnKF) system for the prediction of the IOP13 event. We assess the impacts of various in-situ special observations taken by the KITcube team during this event on the forecasts of socially sensible parameters such as probability of severe and accumulated precipitation. We discuss these impacts not only on the forecasts products but also in terms of the relevant physical mechanisms involved in the event.

  7. The measurement of the cosmic ray primary energy spectrum at 10{sup 16}-10{sup 18} eV with the KASCADE-Grande experiment

    Energy Technology Data Exchange (ETDEWEB)

    Cantoni, Elena [Istituto di Fisica dello Spazio Interplanetario INAF, Torino (Italy); Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Institut fuer Kernphysik, Karlsruher Institut fuer Technologie (Germany); Apel, W.D.; Arteaga-Velazquez, J.C.; Bekk, K. [Institut fuer Kernphysik, Karlsruher Institut fuer Technologie (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Bluemer, J. [Institut fuer Kernphysik, Karlsruher Institut fuer Technologie (Germany); Institut fuer Experimentelle Kernphysik, Karlsruher Institut fuer Technologie (Germany); Bozdog, H. [Institut fuer Kernphysik, Karlsruher Institut fuer Technologie (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Buchholz, P. [Fachbereich Physik, Universitaet Siegen (Germany); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Cossavella, F. [Institut fuer Experimentelle Kernphysik, Karlsruher Institut fuer Technologie (Germany); Daumiller, K. [Institut fuer Kernphysik, Karlsruher Institut fuer Technologie (Germany); Souza, V. de [Institut fuer Experimentelle Kernphysik, Karlsruher Institut fuer Technologie (Germany); Di Pierro, F. [Dipartimento di Fisica Generale dell' Universita, Torino (Italy); Doll, P.; Engel, R.; Engler, J.; Finger, M. [Institut fuer Kernphysik, Karlsruher Institut fuer Technologie (Germany); Fuhrmann, D. [Fachbereich Physik, Universitaet Wuppertal (Germany); Ghia, P.L. [Istituto di Fisica dello Spazio Interplanetario INAF, Torino (Italy)

    2011-03-15

    The KASCADE-Grande experiment operates at Karlsruhe Institute of Technology (KIT) in Germany. It's aim is the study of the primary cosmic radiation, through Extensive Air Shower detection, in the range 10{sup 16}-10{sup 18} eV. Here, measurements are of main interest to understand the high energy evolution of cosmic radiation: a change in the slope of the heavy primary spectrum is expected (as measured at lower energies for lighter primaries) as a possible confirmation of the predicted astrophysical mechanisms; moreover, in this range the transition from galactic to extragalactic radiation is supposed to take place and the observations could clarify the features of this transition, putting the basis for the interpretation of the data at the highest energies. For these tasks KASCADE-Grande fulfills very well the requirements, both concerning the acceptance and the experimental performances. The experiment is constituted by two co-operating arrays of detectors: the KASCADE array, with its 252 detectors in a dense grid of 200x200 m{sup 2} and the Grande array, made of 37 detectors arranged on a wider area of 700x700 m{sup 2}. The Grande array samples the total charged particles size of the air shower, while the KASCADE array provides the muon size In this contribution, KASCADE-Grande measurement of the cosmic ray primary energy spectrum is presented. The exploited technique, calibrated with simulations, combines the charged particles component and muon component on a shower by shower basis, performing the energy estimation of each primary event. Other techniques are also performed, for a better evaluation of systematics and a check of consistency of the hadronic interaction model used in simulations.

  8. 100G Ethernet in the wild - first experiences

    Science.gov (United States)

    Hoeft, Bruno; Stoy, Robert; Schröder, Frank; Reymund, Aurelie; Niederberger, Ralf; Mextorf, Olaf; Werner, Sabine

    2011-12-01

    A 100 Gigabit Testbed was established in a collaboration of 6 partners. Three industry partners have contributed the fiber infrastructure, the DWDM equipment, as well as the required routers. 447 kilometer was the distance of the wide area testbed established in collaboration with the German NREN DFN between Karlsruhe Institute of Technology and Forschungszentrum Jülich Before starting, DFN assured the quality of the fiber infrastructure, the operation of the DWDM systems at both locations, as well as the connection of the routers to this WAN link with a bandwidth of 100GE. 12*10GE interfaces were available at each site for connecting the local testnodes to the routers. A monitoring and measurement framework was installed for recording the most important IP network performance metrics, among them the One Way Delay (OWD) and its Variation, Packet Loss and Packet Reordering. The delay measurements were conducted between the GPS time synchronized Hades[1]measurement nodes at each location. Additionally all relevant counters at the routers have been recorded using a SNMP based Network Manangement Station and supplemented special command line interface output gathering and parsing scripts. The interfaces statistics were stored in 60 second intervals. The aim of the testbed was to demonstrate a failure-free transmission of one or more IP datastreams over 100GE during the whole period of 4 weeks.This included the evaluation of the 100 Gbit/s optical transmission system, the 100GE interfaces between the routers and the optical system, and the evaluation of a sustained 100GE transmission as well as the evaluation of the use of 100GE in a production like environment. The evaluation included a circulated (in a routing loop) tunable load between 1 and 100 Gbit/s, measurement of transmission quality of TCP and UDP datastreams between the endsystems, measurements of one way latency, a ramping up data transmission from approx. 8 Gbit/s up to 96 Gbit/s.

  9. Modelling and mapping of spatial differentiated impacts of nitrogen input to ecosystems within the framework of the UNECE-Convention of Air Pollution Prevention. Part II. The model BERN - assessment of vegetation change and biodiversity; Modellierung und Kartierung raeumlich differenzierter Wirkungen von Stickstoffeintraegen in Oekosysteme im Rahmen der UNECE-Luftreinhaltekonvention. Teilbericht II. Das BERN-Modell - ein Bewertungsmodell fuer die oberirdische Biodiversitaet

    Energy Technology Data Exchange (ETDEWEB)

    Nagel, Hans-Dieter; Schlutow, Angela; Kraft, Philipp; Scheuschner, Thomas; Weigelt-Kirchner, Regine [OEKO-DATA - Ecosystem Analysis and Environmental Data Management, Strausberg (Germany)

    2010-03-15

    Semi-natural ecosystems are exposed to high atmospheric deposition for decades. In contrary to sulphur deposition which could be significantly reduced due to international conventions on air pollution prevention during the last decades, deposition of both, reduced and oxidized nitrogen is still on a very high level in average 40 kg N ha{sup -1} yr{sup -1} in forest ecosystems in Germany. The FuE-Project ''Modelling and mapping of spatial differentiated impacts of nitrogen input to ecosystems within the framework of the UNECE - Convention of Air Pollution Prevention'' was jointly conducted by 4 partner institutions and studied impacts of atmospheric nitrogen deposition and climate change on physicochemical properties of forest soils, nutrient storage and nutrient export (Karlsruhe Research Centre, IMK-IFU) as well as biodiversity of vegetation (OEKO-DATA and Waldkundeinstitut Eberswalde) and soil organisms (Giessen University). Work carried out at OEKO-DATA initially concentrated on the development of the BERN-model. About 14 585 vegetation inventories from all over Germany and other 2 914 relevant inventories evaluated from neighboring countries were integrated in BERN database. With this model, the vegetation changes as a function of variations in the location conditions could be identified due to the implementation of the corresponding time series of geochemical and climate parameters from MoBiLE. A validation of the MoBiLE-BERN-coupling was carried out at Level II sites. From the dynamics of the vegetation development in the context of location changes could be derived critical loads and limits. Also the current regeneration potential as well as a harmonious natural balance of location factors could be determined. Likewise, the potential of danger to biodiversity and the livelihood opportunities of plant species or societies could be demonstrated. The most distinct dependence of biodiversity change could be detected on the alterations of

  10. Anatomic changes of target vessels after fenestrated and branched aortic aneurysm repair.

    Science.gov (United States)

    Kalder, J; Keschenau, P; Tamm, M; Jalaie, H; Jacobs, M J; Greiner, A

    2014-04-01

    Objective of this study was to evaluate the anatomic changes of the stented target vessels after endovascular repair of complex aortic aneurysms. Between July 2011 and December 2013, 53 aortic aneurysms were treated in our department with fenestrated and branched stent-graft devices. Forty-two of these patients were pre- and postoperatively scanned with a high resolution computer tomography (CT) (Cook Zenith® fenestrated or branched, Australia Pty. Ltd., Brisbane, Australia: N.=19; AnacondaTM fenestrated, Vascutek, Glasgow, Scotland, UK: N.=23). The other 11 out of the 53 patients did not receive a CT scan, because of a pre-existing renal failure. In the CT scans we retrospectively evaluated the anatomic vessel deviation at the origin of the target vessel and the vessel shift distal to the stent. For the first measurement the CT scans were loaded into OsiriX MD®, and the pre- and postoperative angles of the target vessels were measured and subtracted. For matching, the CT-scans were normalized at vertebral body lumbar 2. The second measured angle was the maximal measured angle distal to the target vessel stent-graft. Altogether, 113 target vessels were stented (celiac trunk [CT] 15, superior mesenteric arteries [SMA] 26, renal arteries [RA] 72), with 97 balloon-expandable PTFE stents: 90 Atrium V12 (Maquet Getinge group, Hudson, NH, USA), 7 BeGrafts (Bentley InnoMed, Hechingen, Germany) and 16 self-expandable fluency PTFE stents (Bard, Karlsruhe, Germany). The mean anatomic deviation at the target vessel origin was 28±17.3 and the mean vessel shift distal to the stent was 36.3±18.8. There were no significant differences between the main device and the target vessel stent types. Fenestrated and branched stent-graft solutions for aortic aneurysm repair induce changes of the target vessel anatomy. We did not observe significant differences between the several devices.

  11. GASFLOW: A Computational Fluid Dynamics Code for Gases, Aerosols, and Combustion, Volume 2: User's Manual

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, B. D.; Mueller, C.; Necker, G. A.; Travis, J. R.; Spore, J. W.; Lam, K. L.; Royl, P.; Wilson, T. L.

    1998-10-01

    Los Alamos National Laboratory (LANL) and Forschungszentrum Karlsruhe (FzK) are developing GASFLOW, a three-dimensional (3D) fluid dynamics field code as a best-estimate tool to characterize local phenomena within a flow field. Examples of 3D phenomena include circulation patterns; flow stratification; hydrogen distribution mixing and stratification; combustion and flame propagation; effects of noncondensable gas distribution on local condensation and evaporation; and aerosol entrainment, transport, and deposition. An analysis with GASFLOW will result in a prediction of the gas composition and discrete particle distribution in space and time throughout the facility and the resulting pressure and temperature loadings on the walls and internal structures with or without combustion. A major application of GASFLOW is for predicting the transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containment and other facilities. It has been applied to situations involving transporting and distributing combustible gas mixtures. It has been used to study gas dynamic behavior in low-speed, buoyancy-driven flows, as well as sonic flows or diffusion dominated flows; and during chemically reacting flows, including deflagrations. The effects of controlling such mixtures by safety systems can be analyzed. The code version described in this manual is designated GASFLOW 2.1, which combines previous versions of the United States Nuclear Regulatory Commission code HMS (for Hydrogen Mixing Studies) and the Department of Energy and FzK versions of GASFLOW. The code was written in standard Fortran 90. This manual comprises three volumes. Volume I describes the governing physical equations and computational model. Volume II describes how to use the code to set up a model geometry, specify gas species and material properties, define initial and boundary conditions, and specify different outputs, especially graphical displays. Sample problems are included. Volume III

  12. Data compilation and evaluation of U(IV) and U(VI) for thermodynamic reference database THEREDA

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Anke; Bok, Frank; Brendler, Vinzenz

    2015-07-01

    THEREDA (Thermodynamic Reference Database) is a collaborative project, which has been addressed this challenge. The partners are Helmholtz-Zentrum Dresden-Rossendorf, Karlsruhe Institute of Technology (KIT-INE), Gesellschaft fuer Anlagen- und Reaktorsicherheit Braunschweig mbH (GRS), TU Bergakademie Freiberg (TUBAF) and AF-Consult Switzerland AG (Baden, Switzerland). The aim of the project is the establishment of a consistent and quality assured database for all safety relevant elements, temperature and pressure ranges, with its focus on saline systems. This implied the use of the Pitzer approach to compute activity coefficients suitable for such conditions. Data access is possible via commonly available internet browsers under the address http://www.thereda.de. One part of the project - the data collection and evaluation for uranium - was a task of the Helmholtz-Zentrum Dresden-Rossendorf. The aquatic chemistry and thermodynamics of U(VI) and U(IV) is of great importance for geochemical modelling in repository-relevant systems. The OECD/NEA Thermochemical Database (NEA TDB) compilation is the major source for thermodynamic data of the aqueous and solid uranium species, even though this data selection does not utilize the Pitzer model for the ionic strength effect correction. As a result of the very stringent quality demands, the NEA TDB is rather restrictive and therefore incomplete for extensive modelling calculations of real systems. Therefore, the THEREDA compilation includes additional thermodynamic data of solid secondary phases formed in the waste material, the backfill and the host rock, though falling into quality assessment (QA) categories of lower accuracy. The data review process prefers log K values from solubility experiments (if available) to those calculated from thermochemical data.

  13. National And European Law: Problem Of Implementation

    Directory of Open Access Journals (Sweden)

    Olga M. Mesheriakova

    2014-09-01

    Full Text Available Present article is devoted to one of the main problems for all integration communities –problem of implementation of the integration law norms in the national legal system of member states. Author, on the example of certain member states of the European Union considers mechanism of the European Union law action in it's member states. In the article constitutional norms of the number of member states which set a ratio of the national and European laws are analyzed. According to the principle of competence giving, member states voluntary transfer part of the competence to the European Union. Competences which are transferred to the member states are the competences of the European Union. In the course of research author investigates opinions of scientists and analyze regulations. Author pays separate attention to the question of the European Union creation. For example, author notes that consideration by the Federal Constitutional Court in Karlsruhe of the question of compliance of the Treaty to the Constitution of Germany became neither more nor less a most important milestone on the way of Treaty on the European Union ratification by Germany. In the decision on this matter Court defined a number of reference points for the purpose of possible excise if the European integration elimination out of those limits which are set for the government of Germany by its Constitution. The decision of the Constitutional Court of Germany though meant approval of the Treaty on the European Union in the political sense, it was nevertheless unambiguously directed against broad interpretation and federalist vision of the European integration. It is obvious that states, on the basis of constitutional norms may leave contracts that are burdensome for them. It concerns not only international treaties, but also Treaties of the European Union.

  14. Validation of a large scale hydrological model with data fields retrieved from reflective and thermal optical remote sensing data A case study for the Upper Rhine Valley

    Science.gov (United States)

    Casper, Markus C.; Vohland, Michael

    For the entire Upper Rhine Valley between Karlsruhe and Basel, a long term simulation (1985-2002) with the GWN_BW model (partly physically based 1-D water balance model) resulted in the retrieval of the following hydrological process variables: daily potential and actual evaporation, surface runoff from sealed surfaces and groundwater recharge. Meteorological data has been interpolated from all available stations in France, Germany and Switzerland including the mountainous regions of the Vosges Mountains and the Black Forest. The primary grid size of the model was 500 m; for landuse, the sub-grid variability has been taken into account additionally. In an alternative approach, Landsat-5 TM scenes from two different acquisition dates were integrated to model the daily rates of actual evaporation ( Ea). To this end, data fields retrieved from both the thermal and reflective Landsat channels were combined with ancillary meteorological and digital elevation data. Assuming a single layer canopy-soil system, the daily Ea rates were estimated from the modelled net radiation and the differences between maximum surface and maximum air temperatures; the final partitioning of sensible and latent heat fluxes was strongly determined by the pixel-wise derived vegetation abundances. The results of the remote sensing approach were compared quantitatively to the Ea rates provided by the hydrological model by means of both correlation and geostatistical pattern analysis. Extreme differences between both approaches were detected. The low spatial variability of the simulated Ea was explained by the parameterisation scheme for surface resistances. In total, the hydrological model often underestimated Ea due to a non realistic representation of soil water availability under deciduous forests and a missing representation of irrigation. In addition, a static and very simple representation of capillary rise of groundwater was found to cause large overestimates of the modelled Ea during

  15. Influence of particle size and shape on the backscattering linear depolarisation ratio of small ice crystals – cloud chamber measurements in the context of contrail and cirrus microphysics

    Directory of Open Access Journals (Sweden)

    R. Wagner

    2012-11-01

    Full Text Available The article presents the laser scattering and depolarisation instrument SIMONE that is installed at the large aerosol and cloud chamber facility AIDA of the Karlsruhe Institute of Technology. SIMONE uses a 488 nm cw laser to probe simulated atmospheric clouds by measuring the scattered light from the 1.8° and 178.2° directions. At 178.2°, the scattered light is analysed for the linear polarisation state to deduce the particle linear depolarisation ratio δp which is a common measurement parameter of atmospheric lidar applications. The optical setup and the mathematical formalism of the depolarisation detection concept are given. SIMONE depolarisation measurements in spheroidal hematite aerosol and supercooled liquid clouds are used to validate the instrument. SIMONE data from a series of AIDA ice nucleation experiments at temperatures between 195 and 225 K were analysed in terms of the impact of the ice particle microphysics on δp. We found strong depolarisation values of up to 0.4 in case of small growing and sublimating ice particles with volume equivalent diameters of only a few micrometers. Modelling runs with the T-matrix method showed that the measured depolarisation ratios can be accurately reproduced assuming spheroidal and cylindrical particles with a size distribution that has been constrained by IR extinction spectroscopy. Based on the T-matrix modelling runs, we demonstrate that in case of small ice crystals the SIMONE depolarisation results are representative for the lidar depolarisation ratio which is measured at exact backscattering direction of 180°. The relevance of our results for the interpretation of recent lidar observations in cirrus and contrails is discussed. In view of our results, the high depolarisation ratios observed by the spaceborne lidar CALIOP in the tropical upper troposphere might be a hint for the presence of small (sublimating ice particles in the outflows of deep convective systems.

  16. Calibration and Application of an Array of Portable FTIR Spectrometers (EM27/SUN) for Detecting Greenhouse Gas Emissions

    Science.gov (United States)

    Frey, M.; Chelin, P.; Fratacci, T.; Schäfer, K.; Xueref-Remy, I.; Te, Y. V.; Jeseck, P.; Janssen, C.; Vogel, F. R.; Hase, F.; Blumenstock, T.; Kiel, M.; Sha, M. K.; Tu, Q.; Gross, J.; Gizaw, G.

    2015-12-01

    Anthropogenic global warming is mainly driven by a continuing increase of atmospheric greenhouse gases abundances. Precise knowledge of the variable atmospheric concentrations is of utmost importance for the quantification of sinks and sources of these gases. For global observations of column-averaged dry air mole fractions of greenhouse gases, satellite-borne instruments (e.g. GOSAT or OCO-2) are used. These instruments are validated against a network of ground-based high resolution Fourier-Transform Infrared (FTIR) spectrometers. This network, called TCCON (Total Carbon Column Observing Network), provides column-averaged abundances with reference precision and accuracy. However, these instruments are expensive, logistically demanding and stationary, so TCCON is less adequate for the quantification of sinks and sources on a regional scale. Recently the Karlsruhe Institute of Technology developed a portable FTIR spectrometer (EM27/SUN) together with Bruker Optics, Ettlingen. In addition to filling in the spatial gaps of the existing TCCON network for better global coverage, a set of these spectrometers can be arranged for detecting localized sinks and sources of greenhouse gases on a regional level, e.g. major cities or fracking areas. Due to their long lifetime, CO2 and CH4 emissions of these sources only introduce a small enhancement to the accumulated atmospheric background abundance. Therefore, high precision and stability are a prerequisite for the measurements. We present a rigorous calibration procedure for a quintuple of EM27/SUN spectrometers. Moreover, we show results from a test campaign conducted 2014 in the major city of Berlin, Germany. We demonstrate that the CO2 emissions of Berlin can be clearly identified in the observations. Measurement results are compared with a simple dispersion model. Finally, a comparison between Berlin data and data from a recent campaign in the megacity Paris is shown.

  17. Retrospective study of extensive heat-pressed ceramic veneers after 36 months.

    Science.gov (United States)

    Rinke, Sven; Lange, Katharina; Ziebolz, Dirk

    2013-02-01

    The clinical performance of ceramic veneers is influenced by various clinical and material-related factors. Retrospective evaluation of extensive anterior ceramic veneers in the upper and lower jaw 36 months after placement in a private practice. Thirty-seven patients (21 female, 16 male) were restored with adhesively luted extensive ceramic veneers made from a heat-pressed ceramic (Cergo, DeguDent, Hanau, Germany). One dentist restored a total of 130 teeth (maxilla N = 76, mandible N = 54). Adhesive cementation was performed with an etch-and-rinse adhesive (Optibond FL, Kerr Hawe, Karlsruhe, Germany) and a dual-curing composite cement. After 36 months, the survival rate (in situ criteria) according to Kaplan-Meier was 95.1% (95% confidence interval [CI]: 0.88; 1). Reasons for failure were four ceramic fractures and one biological failure in five restored teeth. Of the restorations, 92.8% (95% CI: 0.86;1) were in service without any clinical intervention and rated successful after 36 months. Interventions were necessary in five cases (three recementations, two endodontic treatments). Clinical performance was not influenced by the veneer position (maxillar/mandibular, survival p = 0.3/success p = 0.4). Veneers with more than 50% of exposed dentin demonstrated a significantly increased risk (hazard ratio 10.6, p = 0.026) for a clinical intervention (recementation, endodontic treatment), whereas no effect on the survival rate could be detected (p = 0.17). After 36 months of clinical service, extensive veneer restorations made of a pressable ceramic showed a comparable survival and success rate in the upper and lower jaw. Large areas of exposed dentin (>50%) were associated with lower success rates. Mandibular ceramic veneers made using a heat-pressed ceramic offer the same clinical reliability as do veneers on anterior maxillary teeth. Dentin exposure significantly affects the clinical performance of heat-pressed ceramic veneers. © 2012 Wiley Periodicals, Inc.

  18. 3. Workshop on measuring instruments for steady and transient multiphase flow; 3. Workshop: Messtechnik fuer stationaere und transiente Mehrphasenstroemungen

    Energy Technology Data Exchange (ETDEWEB)

    Prasser, H.M. [ed.

    1999-12-01

    The emphasis of the conference was on methods of measurement that show spatial distributions of phase fractions and velocity, particle sizes and bubbles of the disperse phase. Among the methods described were 3D X-ray tomography, grid sensor measurement of velocity profiles, and simultaneous measurement of bubble sizes and gas and liquid flow rates using an optical particle tracking method. Also presented were interesting developments in the field of local probes, e.g. an electrodiffusion probe. Another new development was the attempt to use optical tomography for investigations of two-phase flows. [German] Am 14. Oktober 1999 wurde in Rossendorf die dritte Veranstaltung in einer Serie von Workshops ueber Messtechnik fuer stationaere und transiente Mehrphasenstroemungen durchgefuehrt. Dieses Jahr koennen wir auf 11 interessante Vortraege zurueckblicken. Besonders hervorzuheben sind die beiden Hauptvortraege, die von Herrn Professor Hetsroni aus Haifa und Herrn Dr. Sengpiel aus Karlsruhe gehalten wurden. Ihnen und allen anderen Vortragenden moechten wir herzlich fuer ihren Beitrag zum Gelingen des Workshops danken. Erneut lag ein wichtiger Schwerpunkt auf Messverfahren, die raeumliche Verteilungen von Phasenanteilen und Geschwindigkeiten sowie die Groesse von Partikeln bzw. Blasen der dispersen Phase zugaenglich machen. So wurde ueber einen dreidimensional arbeitenden Roentgentomographen, ein Verfahren zur Messung von Geschwindigkeitsprofilen mit Gittersensoren und eine Methode zur simultanen Messung von Blasengroessen sowie Feldern von Gas- und Fluessigkeitsgeschwindigkeit mit einer optischen Partikelverfolgungstechnik vorgetragen. Daneben wurden interessante Entwicklungen auf dem Gebiet der lokalen Sonden vorgestellt, wie z.B. eine Elektrodiffusionssonde. Neue messtechnische Ansaetze waren ebenfalls vertreten; hervorzuheben ist der Versuch, die Methode der optischen Tomographie fuer die Untersuchung von Zweiphasenstroemungen nutzbar zu machen. (orig.)

  19. MINOP: development of a miniaturized endoscopic operation system for neurosurgery

    Science.gov (United States)

    Guber, Andreas E.; Wieneke, Paul

    1996-04-01

    Within the framework of R&D activities in the field of microsystems technology, the Institute for Microstructure Technology of Karlsruhe Research Center among others has started to improve the functionality of existing medicotechnical instruments by increased integration of microtechnical components. On the basis of microsystems fabrication techniques, completely novel medical endoscope systems have become feasible. In cooperation with clinical, technical and industrial partners, a novel endoscopic operation system based on microsystems technology is being developed by the Institute for Microstructure Technology and the Aesculap AG company, Tuttlingen within the framework of the MINOP joint project. This new system shall be applied above all in the field of neurosurgery. This newly conceived endosystem is characterized by a multitude of novelties. It can perform a number of both sensor and actor functions. Due to its extremely small outer diameter, it can be applied through minute openings. As a result of the integrated microfluidic control system, the flexible endoscope can be moved to the actual site of operation on a previously specified path. This will allow future bi- and triportal neuro-endoscopic interventions for critical operations in the brain area. The different lumina of the flexible endoscope fulfill various functions. Via the optical fibers, laser radiation may be led to the distal end of the endoscope. Using microtechnical fabrication methods, special plastic microlenses have been produced. The working channel can be applied for rinsing and removal. Furthermore, the cleaning of the optics or the taking of tissue samples are possible. If required, another laser fiber can be driven forward through the working channel for selective therapy. For the first time, high-performance microinstruments have been developed on the basis of novel materials. These instruments can be applied either through the working channel or through an additional trocar.

  20. Ginkgo biloba extract reduces high-glucose-induced endothelial reactive oxygen species generation and cell adhesion molecule expression by enhancing HO-1 expression via Akt/eNOS and p38 MAP kinase pathways.

    Science.gov (United States)

    Tsai, Hsiao-Ya; Huang, Po-Hsun; Lin, Feng-Yen; Chen, Jia-Shiong; Lin, Shing-Jong; Chen, Jaw-Wen

    2013-03-12

    Hyperglycemia is one of the major risk factors leading to vascular complications in clinical diabetes mellitus. Ginkgo biloba extract (GBE), an antioxidant herbal medicine, possesses anti-inflammatory effects. We examined whether GBE can reduce high glucose-induced endothelial adhesiveness to monocytes, an in vitro sign mimicking in vivo early atherogenesis, through selective regulation of heme oxygenase (HO)-1 expression. Human aortic endothelial cells (HAECs) were cultured with normal glucose or high glucose (25 mM) for 4 days and subsequently combined with GBE (EGb761, Dr. Willmar Schwabe, Karlsruhe, Germany) treatment in the last 18 h of the 4-day period. The endothelial reactive oxygen species (ROS) generation, adhesion molecule expression and the adhesiveness to monocytes were examined. The specific signal pathways such as HO-1 were also examined. High glucose increased ROS generation, adhesion molecule expression and the adhesiveness to monocytes in HAECs. These high glucose-induced phenomena could be suppressed by GBE (100 μg/ml)-induced HO-1 expression in a dose-dependent and time-dependent manner. In addition, jun N-terminal kinases inhibitor or phosphoinositide 3 kinase inhibitor could reduce GBE-induced HO-1 expression. Furthermore, HO-1 inhibitor, HO-1 siRNA, endothelial nitric oxide synthase (eNOS) siRNA, or nuclear factor erythroid 2-related factor (Nrf) 2 siRNA blocked the cytoprotective effects of GBE. Meanwhile, p38/mitogen-activated protein kinase (MAPK) inhibitor could also reduce the effects of GBE on HO-1 induction. GBE could reduce high glucose-induced endothelial adhesion via enhancing HO-1 expression through the Akt/eNOS and p38/MAPK pathways. Our findings suggest a potential strategy targeting on HO-1 induction by GBE for endothelial protection in the presence of high glucose such as that in diabetes mellitus. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. Investigation and prevention of droplet splashing during operation of a sodium free jet flow

    Energy Technology Data Exchange (ETDEWEB)

    Stoppel, L.; Gordeev, S.; Wetzel, T.; Fellmoser, F.; Daubner, M. [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany). KALLA Lab.; Stieglitz, R. [Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (DE). Inst. for Neutron Physics and Reactor Technology (INR)

    2010-05-15

    Many accelerator application concepts consider liquid metal as a windowless target, at which the particle beam does directly hit the liquid. One of such concepts is studied in the European project ''DIRAC-Secondary beams - Design Study''. This project is focused on the preliminary research work for construction of a new international particle accelerator - Facility for Antiproton and Ion Research (FAIR) in Darmstadt. The planned accelerator is aimed to work with high-energy heavy-ions, such as U{sup 238}. One of the key elements of the FAIR facility is a liquid-metal-target, made in the form of a rectangular shaped Lithium jet aligned with the gravity vector. In the course of preliminary investigations the theoretical and practical conditions for a stable liquid-metal-jet conforming to the FAIR-requirements have been studied in the Karlsruhe Liquid Metal Laboratory (KALLA) sodium facility. The acquired scientific and technological results can be transferred to liquid-metal targets in nuclear applications, for example, the IFMIF-Target for the study of fusion reactor materials and the Myrrah/XT-ADS target. The main goals of the KALLA-part of the project were to design and build a facility for experimental research on hydrodynamic phenomena of the free surface liquid metal flow as well as to look at technological problems influencing the hydrodynamic stability of such flows. One of such problems emerged already during the startup of the facility: Splashing of liquid metal drops in the vacuum volume of the target box. As a result of such splashing process, liquid metal droplets are accumulated on various internal constructional elements of the target box, for example, on the inspection windows. This effect prohibits long term operation with the facility. The present paper describes the methods used to reduce the splashing to a minimum. (orig.)

  2. Micro-invasive glaucoma surgery (MIGS: a review of surgical procedures using stents

    Directory of Open Access Journals (Sweden)

    Pillunat LE

    2017-08-01

    Full Text Available Lutz E Pillunat,1 Carl Erb,2 Anselm GM Jünemann,3 Friedemann Kimmich4 1Department of Ophthalmology, University Hospital Carl Gustav Carus, Dresden, 2Augenklinik am Wittenbergplatz, Berlin, Germany; 3Department of Ophthalmology University of Rostock, Rostock, Germany; 4eyecons, Karlsruhe, Germany Abstract: Over the last decade several novel surgical treatment options and devices for glaucoma have been developed. All these developments aim to cause as little trauma as possible to the eye, to safely, effectively, and sustainably reduce intraocular pressure (IOP, to produce reproducible results, and to be easy to adopt. The term “micro-invasive glaucoma surgery (MIGS” was used for summarizing all these procedures. Currently MIGS is gaining more and more interest and popularity. The possible reduction of the number of glaucoma medications, the ab interno approach without damaging the conjunctival tissue, and the probably safer procedures compared to incisional surgical methods may explain the increased interest in MIGS. The use of glaucoma drainage implants for lowering IOP in difficult-to-treat patients has been established for a long time, however, a variety of new glaucoma micro-stents are being manufactured by using various materials and are available to increase aqueous outflow via different pathways. This review summarizes published results of randomized clinical studies and extensive case report series on these devices, including Schlemm’s canal stents (iStent®, iStent® inject, Hydrus, suprachoroidal stents (CyPass®, iStent® Supra, and subconjunctival stents (XEN. The article summarizes the findings of published material on efficacy and safety for each of these approaches. Keywords: glaucoma, micro-invasive glaucoma surgery, MIGS, iStent, iStent inject, CyPass, Hydrus, XEN

  3. SUBCHANFLOW: a thermal hydraulic sub-channel program to analyse fuel rod bundles and reactor cores

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, V.; Imke, U.; Ivanov, A. [Karlsruhe Institute of Technology, Institute of Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Gomez, R., E-mail: Victor.Sanchez@kit.ed [University of Applied Sciences Offenburg, Badstr. 24, 77652 Offenburg (Germany)

    2010-10-15

    The improvement of numerical analysis tools for the design and safety evaluation of reactor cores in a continuous effort in the nuclear community not only to improve the plant efficiency but also to demonstrate high degree of safety. Investigations at the Institute of Neutron Physics and Reactor Technology of the Karlsruhe Institute of Technology (KIT) are focused on the further development and qualification of subchannel and system codes using experimental data. The majority of sub-channel codes in use likes Thesis, Bacchus, Cobra and Matra, were developed in the seventies and eighties. The programming style is rather obsolete and most of these codes are working internally with British Units instead of Si-Units. In the case of water, outdated steam tables are used. Both the trends to improve the efficiency of light water reactors (LWR) and the involvement of KIT in European projects related to the study of the technical feasibility of different fast reactors systems reinforced the need for the development and improvement of sub-channel codes, since they will play a key role in performing better designs as stand-alone tools or coupled to neutron physical codes (deterministic or stochastic). Hence, KIT started the development of a new sub-channel code SUBCHANFLOW based on the Cobra-family. SUBCHANFLOW is a modular code programmed in Fortran-95 with dynamic memory allocation using Si-units. Different fluids like liquid metals and water are available as coolant. In addition some models were improved or replaced by new ones. In this paper the structure, the physical models and the current validation status will be presented and discussed. (Author)

  4. Unterstützung des Grünen Weges zu Open Access an der Max-Planck-Gesellschaft / Support of the Green Road to Open Access within the Max Planck Society

    Directory of Open Access Journals (Sweden)

    Lengenfelder, Anja

    2009-06-01

    Full Text Available The Max Planck Society (Max-Planck-Gesellschaft; MPG with equal weight supports both the Golden and Green Road to Open Access in practice and politically in a sustainable way.In the context of the Green Road it runs with eDoc a central institutional repository for the MPG. The software of the same name is an in-house development. Based on the experiences and wishes of the users, currently, a new application (PubMan which is built upon the eSciDoc framework is introduced within the institutes. eSciDoc is a co-operation with the FIZ Karlsruhe and is funded until 2009 by the BMBF. All applications and services are Open Source and can therefore be re-used and be further developed. Apart from the development and maintenance of technical infrastructures, the Green Road within the MPG is furthered via direct and indirect personal support for scientists during the publication process. In this regard the close exchange between single Max Planck Institutes, the Max Planck Digital Library and other national and international partners plays an important role. With the Berlin Declaration in 2003 and currently in the Priority Initiative “Digital Information” of the Alliance of the German Research Organizations this commitment for Open Access is also politically represented.In this article are introduced and explained both eDoc and PubMan respectively as well as the Open Access Policy of the MPG with a special focus on the activities within the Green Road.

  5. Multiphase flow in the advanced fluid dynamics model

    Energy Technology Data Exchange (ETDEWEB)

    Bohl, W.R.; Wilhelm, D.; Berthier, J.; Parker, F.P.; Ichikawa, S.; Goutagny, L.; Ninokata, H.

    1988-01-01

    This paper describes the modeling used in the Advanced Fluid Dynamics Model (AFDM), a computer code to investigate new approaches to simulating severe accidents in fast reactors. The AFDM code has 12 topologies describing what material contacts are possible depending on the presence or absence of a given material in a computational cell, the dominant liquid, and the continuous phase. Single-phase, bubbly, churn-turbulent, cellular, and dispersed flow are permitted for the pool situations modeled. Interfacial areas between the continuous and discontinuous phases are convected to allow some tracking of phenomenological histories. Interfacial areas also are modified by models of nucleation, dynamic forces, turbulence, flashing, coalescence, and mass transfer. Heat transfer generally is treated using engineering correlations. Liquid/vapor phase transitions are handled with a nonequililbrium heat-transfer-limited model, whereas melting and freezing processes are based on equilibrium considerations. The Los Alamos SESAME equation of state (EOS) has been inplemented using densities and temperatures as the independent variables. A summary description of the AFDM numerical algorithm is provided. The AFDM code currently is being debugged and checked out. Two sample three-field calculations also are presented. The first is a three-phase bubble column mixing experiment performed at Argonne National Laboratory; the second is a liquid-liquid mixing experiment performed at Kernforschungszentrum, Karlsruhe, that resulted in rapid vapor production. We conclude that only qualitative comparisons currently are possible for complex multiphase situations. Many further model developments can be pursued, but there are limits because of the lack of a comprehensive theory, the lack of detailed multicomponent experimental data, and the difficulties in keeping the resulting model complexities tractable.

  6. On the implementation of new technology modules for fusion reactor systems codes

    Energy Technology Data Exchange (ETDEWEB)

    Franza, F., E-mail: fabrizio.franza@kit.edu [Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, 76344 (Germany); Boccaccini, L.V.; Fisher, U. [Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, 76344 (Germany); Gade, P.V.; Heller, R. [Institute for Technical Physics, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, 76344 (Germany)

    2015-10-15

    Highlights: • At KIT a new technology modules for systems code are under development. • A new algorithm for the definition of the main reactor's components is defined. • A new blanket model based on 1D neutronics analysis is described. • A new TF coil stress model based on 3D electromagnetic analysis is described. • The models were successfully benchmarked against more detailed models. - Abstract: In the frame of the pre-conceptual design of the next generation fusion power plant (DEMO), systems codes are being used from nearly 20 years. In such computational tools the main reactor components (e.g. plasma, blanket, magnets, etc.) are integrated in a unique computational algorithm and simulated by means of rather simplified mathematical models (e.g. steady state and zero dimensional models). The systems code tries to identify the main design parameters (e.g. major radius, net electrical power, toroidal field) and to make the reactor's requirements and constraints to be simultaneously accomplished. In fusion applications, requirements and constraints can be either of physics or technology kind. Concerning the latest category, at Karlsruhe Institute of Technology a new modelling activity has been recently launched aiming to develop improved models focusing on the main technology areas, such as neutronics, thermal-hydraulics, electromagnetics, structural mechanics, fuel cycle and vacuum systems. These activities started by developing: (1) a geometry model for the definition of poloidal profiles for the main reactors components, (2) a blanket model based on neutronics analyses and (3) a toroidal field coil model based on electromagnetic analysis, firstly focusing on the stresses calculations. The objective of this paper is therefore to give a short outline of these models.

  7. GASFLOW: A Computational Fluid Dynamics Code for Gases, Aerosols, and Combustion, Volume 3: Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    Müller, C.; Hughes, E. D.; Niederauer, G. F.; Wilkening, H.; Travis, J. R.; Spore, J. W.; Royl, P.; Baumann, W.

    1998-10-01

    Los Alamos National Laboratory (LANL) and Forschungszentrum Karlsruhe (FzK) are developing GASFLOW, a three-dimensional (3D) fluid dynamics field code as a best- estimate tool to characterize local phenomena within a flow field. Examples of 3D phenomena include circulation patterns; flow stratification; hydrogen distribution mixing and stratification; combustion and flame propagation; effects of noncondensable gas distribution on local condensation and evaporation; and aerosol entrainment, transport, and deposition. An analysis with GASFLOW will result in a prediction of the gas composition and discrete particle distribution in space and time throughout the facility and the resulting pressure and temperature loadings on the walls and internal structures with or without combustion. A major application of GASFLOW is for predicting the transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containment and other facilities. It has been applied to situations involving transporting and distributing combustible gas mixtures. It has been used to study gas dynamic behavior in low-speed, buoyancy-driven flows, as well as sonic flows or diffusion dominated flows; and during chemically reacting flows, including deflagrations. The effects of controlling such mixtures by safety systems can be analyzed. The code version described in this manual is designated GASFLOW 2.1, which combines previous versions of the United States Nuclear Regulatory Commission code HMS (for Hydrogen Mixing Studies) and the Department of Energy and FzK versions of GASFLOW. The code was written in standard Fortran 90. This manual comprises three volumes. Volume I describes the governing physical equations and computational model. Volume II describes how to use the code to set up a model geometry, specify gas species and material properties, define initial and boundary conditions, and specify different outputs, especially graphical displays. Sample problems are included. Volume

  8. Does the homogeneous ice nucleation initiate at the surface or in the volume of super-cooled water droplets?

    Science.gov (United States)

    Benz, S.; Möhler, O.; Wagner, R.; Schnaiter, M.; Leisner, T.

    2009-04-01

    The nucleation of ice in super-cooled water droplets affects many atmospheric processes as the initiation of precipitation and radiative transfer. Water droplets are freezing due to the formation of a critical germ initiating the freezing of the whole droplet. The common quantity to describe the creation of ice is the nucleation rate J, defined as the product of the number of critical germs and the rate at which additional molecules are incorporated into a critical germ. Nucleation of ice in a super-cooled liquid is a stochastic process and depends strongly on temperature. Recently there was a discussion whether the germs of the new phase are formed preferentially near the surface or in the interior of the droplet. Experiments at the aerosol and cloud chamber AIDA of Forschungszentrum Karlsruhe were performed to assess this question. We produced clouds of super-cooled water droplets and deduced the ice nucleation rate J from simultaneously measurements of the number density and size distribution of liquid droplets, the number density of ice particles, and the temperature in the range between -36 and -37 °C. With different number densities of seed aerosol particles (sulphuric acid aerosol) we were able to vary the size of the nucleating water droplets between 4 µm and 9 µm diameter. The comparison of the results - by assumption of a volume dependent process - showed very good agreement both with data from literature gained from considerably larger droplets and with classical nucleation theory. The nucleation rates disagree from each other when converting them to surface-proportional values. This contradicts the hypothesis that a critical germ is formed preferentially near the surface of a super-cooled liquid droplet.

  9. Relaxometry in soil science

    Science.gov (United States)

    Schaumann, G. E.; Jaeger, F.; Bayer, J. V.

    2009-04-01

    -destructive way. Recent studies investigated wetting and swelling processes in soil samples, as well as the formation of microbial biofilms in soil the formation. This contribution gives an overview of current applications and the potential of NMR relaxometry in soil science with special emphasis on proton NMR relaxometry. References Bird, N.R.A., Preston, A.R., Randall, E.W., Whalley, W.R. & Whitmore, A.P. 2005. Measurement of the size distribution of water-filled pores at different matric potentials by stray field nuclear magnetic resonance. 56, 135-143. Bryar, T.R. & Knight, R.J. 2002. Sensitivity of Nuclear Magnetic Resonance Relaxation Measurements to Changing Soil Redox Conditions. Geophysical Research Letters, 29, 50/1-50/4. Conte, P., Spaccini, R. & Piccolo, A. 2006. Advanced CPMAS-13C NMR techniques for molecular characterization of size-separated fractions from a soil humic acid. Analytical and Bioanalytical Chemistry, 386, 382-390. Gunasekara, A.S., Simpson, M.I. & Xing, B. 2003. Identification and characterization of sorption domains in soil organic matter using strucuturally modified humic acids. Environmental Science & Technology, 37, 852-858. Jaeger, F., Grohmann, E., Boeckelmann, U. & Schaumann, G.E. 2006. Microbial effects on 1H NMR Relaxometry in soil samples and glass bead reactors. In Humic Substances - Linking Structure to Functions. Proceedings of the 13th Meeting of the International Humic Substances Societyin Karlsruhe eds. F.H. Frimmel & G. Abbt-Braun), pp. 929-932. Universität Karlsruhe, Karlsruhe. Hurraß, J. & Schaumann, G.E. 2007. Hydration kinetics of wettable and water repellent soil samples. Soil Science Society of America Journal, 71, 280-288. Jaeger, F., Grohmann, E. & Schaumann, G.E. 2006. 1H NMR Relaxometry in natural humous soil samples: Insights in microbial effects on relaxation time distributions. Plant and Soil, 280, 209-222. Jaeger, F., Rudolph, N., Lang, F. & Schaumann, G.E. 2008. Effects of soil solution's constituents on proton NMR

  10. Precision monitoring and calibration of the high-voltage for the KATRIN experiment; Praezisionsueberwachung und Kalibration der Hochspannung fuer das KATRIN-Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Thuemmler, T.

    2007-11-12

    The goal of the KATRIN(KArlsruhe TRIritium Neutrino) Experiment is to directly determine the neutrino rest mass from the kinematics of the tritium-{beta}-decay. KATRIN uses the high resolution and luminosity of a spectrometer following the MAC-E filter principle. Based on the experience of the successful predecessor experiments in Mainz and Troisk and the improved experimental technology, KATRIN aims to reach a sensitivity on the neutrino mass of 0.2 eV/c{sup 2} (90% C.L.). One of the few systematic uncertainties that have to be reduced to meet this goal is the uncertainty of measuring and monitoring the potential of the electrostatic filter of the spectrometer. In tritium measurement mode voltages of about U{sub 0} =-18.6 kV have to be permanently monitored with a maximum uncertainty of 3.3 ppm ({approx} 61mV at U{sub 0}), in order not to add more than {delta}m{sup 2}{sub {nu}{sub ec}}{sup 4} {<=} 0.0075 eV{sup 2} to the total systematic uncertainty. The goal of this work is to build a new precision high voltage divider in cooperation with PTB Braunschweig that reaches an uncertainty of about 1 ppm at voltages up to 35 kV. The divider is based on a new type of precision resistors, which have been screened with respect to their warm up drift and their temperature coefficient at the ppm level. By combining 100 of the best matching samples, the mutual warm up effect could be reduced to a computed value of <0.02 ppm. The precision resistors are mounted in a shielded and temperature stabilized vessel under N{sub 2} gas. The properties of both installed low voltage outputs with the ratios 1972:1 and 3944:1 have been repeatedly calibrated with about one year time difference at the DC high voltage laboratory (division 2.31) of PTB. The performance of the new divider in real measurements has been tested with the prototype of the new condensed {sup 83m}Kr calibration source (CKrS) [Ost08] at the Mainz spectrometer. Detailed stability investigations of the energy of the {sup

  11. Diabetes-related information-seeking behaviour: a systematic review.

    Science.gov (United States)

    Kuske, Silke; Schiereck, Tim; Grobosch, Sandra; Paduch, Andrea; Droste, Sigrid; Halbach, Sarah; Icks, Andrea

    2017-10-24

    Information-seeking behaviour is necessary to improve knowledge on diabetes therapy and complications. Combined with other self-management skills and autonomous handling of the disease, it is essential for achieving treatment targets. However, a systematic review addressing this topic is lacking. The aims of this systematic review were to identify and analyse existing knowledge of information-seeking behaviour: (1) types information-seeking behaviour, (2) information sources, (3) the content of searched information, and (4) associated variables that may affect information-seeking behaviour. The systematic review follows the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) requirements. MEDLINE, CINAHL, EMBASE, ScienceDirect, PsycInfo, Cochrane Library, Web of Science, CCMed, ERIC, Journals@OVID, Deutsches Ärzteblatt and Karlsruher virtueller Katalog (KvK) databases were searched. Publications dealing with information-seeking behaviour of people with diabetes mellitus published up to June 2015 were included. A forward citation tracking was performed in September 2016 and June 2017. Additionally, an update of the two main databases (MEDLINE, CINAHL) was conducted, considering studies published up to July 2017. Studies published in languages other than English or German were excluded, as well as letters, short reports, editorials, comments and discussion papers. A study selection and the critical appraisal of the selected studies were performed independently by two reviewers. A third reviewer was consulted if any disagreement was found. Data extraction and content analysis were performed using selected dimensions of Wilson's 'model of information behaviour'. Twenty-six studies were included. Five 'types of information-seeking behaviour' were identified, e.g. passive and active search. The 'Internet' and 'healthcare professionals' were the most frequently reported sources. 'Diet', 'complications', 'exercise' and 'medications and

  12. Alleviating neuropsychiatric symptoms in dementia: the effects of Ginkgo biloba extract EGb 761®. Findings from a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Bachinskaya N

    2011-04-01

    Full Text Available Natalia Bachinskaya1, Robert Hoerr2, Ralf Ihl3For the GOTADAY Study Group1Institute of Gerontology, Academy of Medical Sciences, Kiev, Ukraine; 2Clinical Research Department, Dr Willmar Schwabe Pharmaceuticals, Karlsruhe, Germany; 3Geriatric Psychiatry Center, Maria-Hilf Hospital Krefeld, Krefeld, GermanyPurpose: To examine the effects of Ginkgo biloba extract EGb 761® on neuropsychiatric symptoms of dementia.Patients and methods: Randomized, controlled, double-blind, multicenter clinical trial involving 410 outpatients with mild to moderate dementia (Alzheimer’s disease with or without cerebrovascular disease, vascular dementia, scoring at least 5 on the Neuropsychiatric Inventory (NPI, with at least one item score of 3 or more. Total scores on the SKT cognitive test battery (Erzigkeit’s short syndrome test were between 9 and 23. After random allocation, the patients took 240 mg of EGb 761® or placebo once daily for a period of 24 weeks. Changes from baseline to week 24 in the NPI composite and in the SKT total score were the primary outcomes. The NPI distress score was chosen as a secondary outcome measure to evaluate caregivers’ distress.Results: The NPI composite score improved by -3.2 (95% confidence interval -4.0 to -2.3 in patients taking EGb 761® (n = 202, but did not change (-0.9; 0.9 in those receiving placebo (n = 202, which resulted in a statistically significant difference in favor of EGb 761® (P < 0.001. Treatment with EGb 761® was significantly superior to placebo for the symptoms apathy/indifference, sleep/night-time behavior, irritability/lability, depression/dysphoria, and aberrant motor behavior. Caregivers’ distress evaluation revealed similar baseline pattern and improvements.Conclusion: Treatment with EGb 761®, at a once-daily dose of 240 mg, was safe, effectively alleviated behavioral and neuropsychiatric symptoms in patients with mild to moderate dementia, and improved the wellbeing of their caregivers

  13. Site Response and Liquefaction Risk Analysis for Bucharest, Romania

    Science.gov (United States)

    Hannich, D.; Ehret, D.; Hoetzl, H.; Grandas, C.; Huber, G.; Bala, A.

    2007-12-01

    Bucharest, the capital of Romania, with more than 2 million inhabitants, is considered, after Istanbul, the second- most earthquake-endangered metropolis in Europe. Four major earthquakes with moment-magnitudes between 6.9 and 7.7 hit Bucharest in the last 65 years. All disastrous earthquakes are generated within a small epicentral area - the Vrancea region - about 150 km northeast of Bucharest. Thick unconsolidated sedimentary layers in the area of Bucharest amplify the arriving seismic shear waves causing severe destruction. Thus, pertinent site response analysis combined with liquefaction risk analysis for the city area are of highest priority for the disaster prevention and mitigation of earthquake effects. Within the frame of the Collaborative Research Center (CRC) 461: "Strong Earthquakes: A Challenge for Geosciences and Civil Engineering, at the University of Karlsruhe, Germany, recently detailed field investigations for the near-surface soil layers in Bucharest were performed. These include Seismic Cone Penetration Tests (SCPTU) and seismic refraction measurements for shallow depths. SCPTU is used to obtain a detailed distribution of the shear wave velocities and in situ state parameters of soils. The results are used for site response analysis with linear and non-linear wave-propagation models as well as for a liquefaction risk analysis. Commonly linear-equivalent models are used to simulate the response of the soil during earthquakes. Nevertheless, the linear-equivalent model cannot reproduce non-linear effects like liquefaction, layer isolation, and consolidation during shaking. Thus, a 1-D wave propagation model was used to study the influence of non- linear effects in the site response analysis. Cone resistance, sleeve friction and pore water pressure registered continuous by the SCPTU method until depths of 35m permit to determine by simplified empirical methods the factor of safety and the probability of liquefaction for different soil layers at

  14. Mobility of engineered inorganic nanoparticles in porous media

    Science.gov (United States)

    Metreveli, George; Heidmann, Ilona; Schaumann, Gabriele Ellen

    2013-04-01

    Besides the excellent properties and great potential for various industrial, medical, pharmaceutical, cosmetic, and life science applications, engineered inorganic nanoparticles (EINP) can show also disadvantages concerning increasing risk potential with increasing application, if they are released in the environmental systems. EINP can influence microbial activity and can show toxic effects (Fabrega et al., 2009). Similar to the inorganic natural colloids, EINP can be transported in soil and groundwater systems (Metreveli et al., 2005). Furthermore, due to the large surface area and high sorption and complex formation capacity, EINP can facilitate transport of different contaminants. In this study the mobility behaviour of EINP and their effect on the transport of different metal(loid) species in water saturated porous media was investigated. For these experiments laboratory column system was used. The column was filled with quartz sand. The interactions between EINP and metal(loid)s were characterised by coupling of asymmetrical flow field flow fractionation (AF4) with inductively coupled plasma mass spectrometer (ICP-MS). As EINP laponite (synthetic three layer clay mineral), and as metal(loid)s Cu, Pb, Zn, Pt and As were used. In AF4 experiments sorption of metal(loid)s on the surface of EINP could be observed. The extent of interactions was influenced by pH value and was different for different metal(loid)s. Laboratory column experiments showed high mobility of EINP, which facilitated transport of most of metal(loid)s in water saturated porous media. Furthermore the migration of synthetic silver nanoparticles in natural soil columns was determined in leaching experiments. Acknowledgement Financial support by German Research Council (DFG) and Max-Buchner-Research Foundation (MBFSt) is gratefully acknowledged. We thank Karlsruhe Institute of Technology (KIT) for the opportunity to perform the column and AF4 experiments. References: Fabrega, J., Fawcett, S. R

  15. Ice cloud processing of ultra-viscous/glassy aerosol particles leads to enhanced ice nucleation ability

    Science.gov (United States)

    Wagner, R.; Möhler, O.; Saathoff, H.; Schnaiter, M.; Skrotzki, J.; Leisner, T.; Wilson, T. W.; Malkin, T. L.; Murray, B. J.

    2012-09-01

    The ice nucleation potential of airborne glassy aqueous aerosol particles has been investigated by controlled expansion cooling cycles in the AIDA aerosol and cloud chamber of the Karlsruhe Institute of Technology at temperatures between 247 and 216 K. Four different solutes were used as proxies for oxygenated organic matter found in the atmosphere: raffinose, 4-hydroxy-3-methoxy-DL-mandelic acid (HMMA), levoglucosan, and a multi-component mixture of raffinose with five dicarboxylic acids and ammonium sulphate. Similar to previous experiments with citric acid aerosols, all particles were found to nucleate ice heterogeneously before reaching the homogeneous freezing threshold provided that the freezing cycles were started well below the respective glass transition temperatures of the compounds; this is discussed in detail in a separate article. In this contribution, we identify a further mechanism by which glassy aerosols can promote ice nucleation below the homogeneous freezing limit. If the glassy aerosol particles are probed in freezing cycles started only a few degrees below their respective glass transition temperatures, they enter the liquid regime of the state diagram upon increasing relative humidity (moisture-induced glass-to-liquid transition) before being able to act as heterogeneous ice nuclei. Ice formation then only occurs by homogeneous freezing at elevated supersaturation levels. When ice forms the remaining solution freeze concentrates and re-vitrifies. If these ice cloud processed glassy aerosol particles are then probed in a second freezing cycle at the same temperature, they catalyse ice formation at a supersaturation threshold between 5 and 30% with respect to ice. By analogy with the enhanced ice nucleation ability of insoluble ice nuclei like mineral dusts after they nucleate ice once, we refer to this phenomenon as pre-activation. We propose a number of possible explanations for why glassy aerosol particles that have re-vitrified in contact

  16. [Are liquid crystals living organisms?].

    Science.gov (United States)

    Snelders, H A

    1997-01-01

    In 1888 the Austrian botanist F. Reinitzer made the observation that the solid compound cholesteryl-benzoate changes - when melting at 145.5 oC - into a cloudy liquid, that however, turns into a clear liquid at 178.5 oC and higher temperatures. The cloudy liquid seemed to be doubly refracting. Soon a number of these so-called 'liquid crystals' were discovered; in 1908 D. Vorländer, professor of organic chemistry at Halle, described more than 250 of these substances. It was O. Lehmann, professor of physics at Aachen (1885), Dresden (1888) and Karlsruhe (1889), who immediately after Reinitzer's observation began a systematic study of these liquid crystals. In The Netherlands the Amsterdam professor of physican chemistry H. W. Bakhuis Roozeboom was interested in liquid crystals, in particular because of their place in his phase system. F.M. Jaeger, at that time teaching chemistry in a secondary school in Zaandam (near Amsterdam) and working as an unpaid university lecturer at the Amsterdam university (by recommendation of Bakhuis Roozeboom), investigated liquid crystals (1906), as did a number of doctoral students (A.C. de Kock, 1903; A. Prins, 1907). At the university of Utrecht L.S. Ornstein, professor of physics, gave the study of liquid crystals a prominent place in his research programme. The discovery of liquid crystals, which seemed to be able to grow, move, divide, copulate, and so on, led to a discussion on the nature of these substances. Time and again Lehmann called them 'apparently living crystals', although without considering them as 'real living beings'. In his book Flüssige Kristalle und die Theorien des Lebens (1906), Lehmann proved to be an obvious adherent of the monistic views of the biologist E. Haeckel. Haeckel considered the existence of liquid crystals as proof of the unity between the inorganic and the organic world that he believed in so strongly. In his last book, Kristallseelen. Studien über das Anorganische Leben (1917), he considered

  17. Estimation of gaseous real-world traffic emissions downstream a motorway

    Science.gov (United States)

    Kohler, M.; Corsmeier, U.; Vogt, U.; Vogel, B.

    The consequences of air pollution scenarios caused by road traffic or the impact of exhaust gas reduction techniques are estimated by emission models. To ensure the quality of model results, it is necessary to evaluate the used emission factors under real-world conditions. Therefore, the Institut für Meteorologie und Klimaforschung (IMK) of the Forschungszentrum Karlsruhe initiated the field campaign BAB II (BundesAutoBahn, Federal motorway). The campaign was conducted in May 2001 with the objective of measuring the traffic emissions at a motorway section and to compare them to modelled emissions. Based on experiences during a precursor campaign (BAB I, 1997), a symmetric experimental set-up was installed which allowed measurements up- and downwind of a motorway nearby Heidelberg, Germany. This paper focuses on the determination of source intensities and emission factors for CO and NO x, whereas other papers in this issue handle VOC and particulate matter. First the basic approach of BAB II measurements up- and downwind of a motorway was approved, showing that it is possible to detect the plume originating from traffic emissions. A case study during a traffic jam illustrates that driving patterns have a strong impact on the emissions and therefore a detailed traffic census is required to obtain reliable emission calculations. Two different strategies were used: (i) long-time measurements during the whole campaign to obtain vertical profiles each 30 min and (ii) measurements during eight special operation periods (SOP) in a higher temporal resolution of 5 min, using instrumentation in elevators. It could be shown that even at a distance of 60-80 m from the motorway the structure of the plume is still inhomogeneous, and concentration changes within short times. The inhomogeneity of the plume not only affects the temporal scale, the spatial scale is also influenced and frequently concentration maxima in higher altitudes are observed. Mean source intensities of 9.5 kg

  18. Source apportionment studies on particulate matter in Beijing/China

    Science.gov (United States)

    Suppan, P.; Shen, R.; Shao, L.; Schrader, S.; Schäfer, K.; Norra, S.; Vogel, B.; Cen, K.; Wang, Y.

    2013-05-01

    More than 15 million people in the greater area of Beijing are still suffering from severe air pollution levels caused by sources within the city itself but also from external impacts like severe dust storms and long range advection from the southern and central part of China. Within this context particulate matter (PM) is the major air pollutant in the greater area of Beijing (Garland et al., 2009). PM did not serve only as lead substance for air quality levels and therefore for adverse health impact effects but also for a strong influence on the climate system by changing e.g. the radiative balance. Investigations on emission reductions during the Olympic Summer Games in 2008 have caused a strong reduction on coarser particles (PM10) but not on smaller particles (PM2.5). In order to discriminate the composition of the particulate matter levels, the different behavior of coarser and smaller particles investigations on source attribution, particle characteristics and external impacts on the PM levels of the city of Beijing by measurements and modeling are performed: a) Examples of long term measurements of PM2.5 filter sampling in 2010/2011 with the objectives of detailed chemical (source attribution, carbon fraction, organic speciation and inorganic composition) and isotopic analyses as well as toxicological assessment in cooperation with several institutions (Karlsruhe Institute of Technology (IfGG/IMG), Helmholtz Zentrum München (HMGU), University Rostock (UR), Chinese University of Mining and Technology Beijing, CUMTB) will be discussed. b) The impact of dust storm events on the overall pollution level of particulate matter in the greater area of Beijing is being assessed by the online coupled comprehensive model system COSMO-ART. First results of the dust storm modeling in northern China (2011, April 30th) demonstrates very well the general behavior of the meteorological parameters temperature and humidity as well as a good agreement between modeled and

  19. International vision requirements for driver licensing and disability pensions: using a milestone approach in characterization of progressive eye disease

    Directory of Open Access Journals (Sweden)

    Alain M Bron

    2010-11-01

    Full Text Available Alain M Bron1, Ananth C Viswanathan2, Ulrich Thelen3, Renato de Natale4, Antonio Ferreras5, Jens Gundgaard6, Gail Schwartz7, Patricia Buchholz81Department of Ophthalmology, University Hospital, Dijon, France; 2Glaucoma Research Unit, Moorfields Eye Hospital NHS Foundation Trust and Department of Genetics, University College of London Institute of Ophthalmology, London, UK; 3Private Practice, Munster, Germany; 4Ospedale Civile di Monselice, Monselice, Italy; 5Ophthalmology, Miguel Servet University Hospital, Zaragoza, Spain; 6COWI, Kolding, Denmark; 7Wilmer Eye Institute, Johns Hopkins University, Glaucoma Consultants, Baltimore, MD, USA; 8Patricia Buchholz Consulting, Karlsruhe, GermanyObjective: Low vision that causes forfeiture of driver’s licenses and collection of disability pension benefits can lead to negative psychosocial and economic consequences. The purpose of this study was to review the requirements for holding a driver’s license and rules for obtaining a disability pension due to low vision. Results highlight the possibility of using a milestone approach to describe progressive eye disease.Methods: Government and research reports, websites, and journal articles were evaluated to review rules and requirements in Germany, Spain, Italy, France, the UK, and the US.Results: Visual acuity limits are present in all driver’s license regulations. In most countries, the visual acuity limit is 0.5. Visual field limits are included in some driver’s license regulations. In Europe, binocular visual field requirements typically follow the European Union standard of ≥120°. In the US, the visual field requirements are typically between 110° and 140°. Some countries distinguish between being partially sighted and blind in the definition of legal blindness, and in others there is only one limit.Conclusions: Loss of driving privileges could be used as a milestone to monitor progressive eye disease. Forfeiture could be standardized as a

  20. Regional Climate Simulations with COSMO-CLM for West Africa using three different soil-vegetation-atmosphere-transfer (SVAT) module

    Science.gov (United States)

    Breil, Marcus; Panitz, Hans-Jürgen

    2014-05-01

    Climate predictions on decadal timescales constitute a new field of research, closing the gap between short-term and seasonal weather predictions and long-term climate projections. Therefore, the Federal Ministry of Education and Research in Germany (BMBF) has recently funded the research program MiKlip (Mittelfristige Klimaprognosen), which aims to create a model system that can provide reliable decadal climate forecasts. Recent studies have suggested that one region with high potential decadal predictability is West Africa. Therefore, the project DEPARTURE (DEcadal Prediction of African Rainfall and ATlantic HURricanE Activity) was established within the MiKlip program to assess the feasibility and the potential added value of regional decadal climate predictions for West Africa. To quantify the potential decadal climate predictability, a multi-model approach with the three different regional climate models REMO, WRF and COSMO-CLM (CCLM) will be realized. The presented research will contribute to DEPARTURE by performing hindcast ensemble simulations with CCLM, driven by global decadal MPI-ESM-LR simulations. Thereby, one focus is on the dynamic soil-vegetation-climate interaction on decadal timescales. Recent studies indicate that there are significant feedbacks between the land-surface and the atmosphere, which might influence the decadal climate variability substantially. To investigate this connection, two different SVATs (Community Land Model (CLM), and VEG3D) will be coupled with the CCLM, replacing TERRA_ML, the standard SVAT implemented in CCLM. Thus, sensitive model parameters shall be identified, whereby the understanding of important processes might be improved. As a first step, TERRA_ML is substituted by VEG3D, a SVAT developed at the IMK-TRO, Karlsruhe, Germany. Compared to TERRA_ML, VEG3D includes an explicit vegetation layer by using a big leaf approach, inducing higher correlations with observations as it has been shown in previous studies. The

  1. Public understanding of geoscientific topics

    Science.gov (United States)

    Münch, Ute; Lauterjung, Jörn

    2014-05-01

    Centre Geesthacht, Centre for Materials and Coastal Research (HZG). Further participating centres are: the Alfred-Wegener-Institute for Polar and Marine Research (AWI), the German Aerospace Center (DLR), the Research Centre Jülich (FZJ), the Helmholtz-Centre for Ocean Sciences (GEOMAR), the Karlsruher Institute for Technology (KIT) and the Helmholtz Centre for Environmental Research (UFZ). The webpage will be accessible at www.eskp.de.

  2. Probing ice clouds by broadband mid-infrared extinction spectroscopy: case studies from ice nucleation experiments in the AIDA aerosol and cloud chamber

    Directory of Open Access Journals (Sweden)

    R. Wagner

    2006-01-01

    Full Text Available Series of infrared extinction spectra of ice crystals were recorded in the 6000–800 cm−1 wavenumber regime during expansion cooling experiments in the large aerosol and cloud chamber AIDA of Forschungszentrum Karlsruhe. Either supercooled sulphuric acid solution droplets or dry mineral dust particles were added as seed aerosols to initiate ice formation after having established ice supersaturated conditions inside the chamber. The various ice nucleation runs were conducted at temperatures between 237 and 195 K, leading to median sizes of the nucleated ice particles of 1–15 µm. The measured infrared spectra were fitted with reference spectra from T-matrix calculations to retrieve the number concentration as well as the number size distribution of the generated ice clouds. The precise evaluation of the time-dependent ice particle number concentrations, i.e., the rates of new ice particle formation, is of particular importance to quantitatively analyse the ice nucleation experiments in terms of nucleation rates and ice activation spectra. The ice particles were modelled as finite circular cylinders with aspect ratios ranging from 0.5 to 3.0. Benefiting from the comprehensive diagnostic tools for the characterisation of ice clouds which are available at the AIDA facility, the infrared retrieval results with regard to the ice particle number concentration could be compared to independent measurements with various optical particle counters. This provided a unique chance to quantitatively assess potential errors or solution ambiguities in the retrieval procedure which mainly originate from the difficulty to find an appropriate shape representation for the aspherical particle habits of the ice crystals. Based on these inter-comparisons, we demonstrate that there is no standard retrieval approach which can be routinely applied to all different experimental scenarios. In particular, the concept to account for the asphericity of the ice crystals

  3. Validation of MIPAS IMK-IAA Temperature, Water Vapor, and Ozone Profiles with MOHAVE-2009 Campaign Measurements

    Science.gov (United States)

    Stiller, Gabrielle; Kiefer, M.; Eckert, E.; von Clarmann, T.; Kellmann, S.; Garcia-Comas, M.; Funke, B.; Leblanc, T.; Fetzer, E.; Froidevaux, L.; hide

    2012-01-01

    MIPAS observations of temperature, water vapor, and ozone in October 2009 as derived with the scientific level-2 processor run by Karlsruhe Institute of Technology (KIT), Institute for Meteorology and Climate Research (IMK) and CSIC, Instituto de Astrofisica de Andalucia (IAA) and retrieved from version 4.67 level-1b data have been compared to co-located field campaign observations obtained during the MOHAVE-2009 campaign at the Table Mountain Facility near Pasadena, California in October 2009. The MIPAS measurements were validated regarding any potential biases of the profiles, and with respect to their precision estimates. The MOHAVE-2009 measurement campaign provided measurements of atmospheric profiles of temperature, water vapor/relative humidity, and ozone from the ground to the mesosphere by a suite of instruments including radiosondes, ozonesondes, frost point hygrometers, lidars, microwave radiometers and Fourier transform infrared (FTIR) spectrometers. For MIPAS temperatures (version V4O_T_204), no significant bias was detected in the middle stratosphere; between 22 km and the tropopause MIPAS temperatures were found to be biased low by up to 2 K, while below the tropopause, they were found to be too high by the same amount. These findings confirm earlier comparisons of MIPAS temperatures to ECMWF data which revealed similar differences. Above 12 km up to 45 km, MIPAS water vapor (version V4O_H2O_203) is well within 10% of the data of all correlative instruments. The well-known dry bias of MIPAS water vapor above 50 km due to neglect of non-LTE effects in the current retrievals has been confirmed. Some instruments indicate that MIPAS water vapor might be biased high by 20 to 40% around 10 km (or 5 km below the tropopause), but a consistent picture from all comparisons could not be derived. MIPAS ozone (version V4O_O3_202) has a high bias of up to +0.9 ppmv around 37 km which is due to a non-identified continuum like radiance contribution. No further

  4. Merged ozone profiles from four MIPAS processors

    Science.gov (United States)

    Laeng, Alexandra; von Clarmann, Thomas; Stiller, Gabriele; Dinelli, Bianca Maria; Dudhia, Anu; Raspollini, Piera; Glatthor, Norbert; Grabowski, Udo; Sofieva, Viktoria; Froidevaux, Lucien; Walker, Kaley A.; Zehner, Claus

    2017-04-01

    The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) was an infrared (IR) limb emission spectrometer on the Envisat platform. Currently, there are four MIPAS ozone data products, including the operational Level-2 ozone product processed at ESA, with the scientific prototype processor being operated at IFAC Florence, and three independent research products developed by the Istituto di Fisica Applicata Nello Carrara (ISAC-CNR)/University of Bologna, Oxford University, and the Karlsruhe Institute of Technology-Institute of Meteorology and Climate Research/Instituto de Astrofísica de Andalucía (KIT-IMK/IAA). Here we present a dataset of ozone vertical profiles obtained by merging ozone retrievals from four independent Level-2 MIPAS processors. We also discuss the advantages and the shortcomings of this merged product. As the four processors retrieve ozone in different parts of the spectra (microwindows), the source measurements can be considered as nearly independent with respect to measurement noise. Hence, the information content of the merged product is greater and the precision is better than those of any parent (source) dataset. The merging is performed on a profile per profile basis. Parent ozone profiles are weighted based on the corresponding error covariance matrices; the error correlations between different profile levels are taken into account. The intercorrelations between the processors' errors are evaluated statistically and are used in the merging. The height range of the merged product is 20-55 km, and error covariance matrices are provided as diagnostics. Validation of the merged dataset is performed by comparison with ozone profiles from ACE-FTS (Atmospheric Chemistry Experiment-Fourier Transform Spectrometer) and MLS (Microwave Limb Sounder). Even though the merging is not supposed to remove the biases of the parent datasets, around the ozone volume mixing ratio peak the merged product is found to have a smaller (up to 0.1 ppmv

  5. Crustal Models Assessment in Western Part of Romania Employing Active Seismic and Seismologic Methods

    Science.gov (United States)

    Bala, Andrei; Toma-Danila, Dragos; Tataru, Dragos; Grecu, Bogdan

    2017-12-01

    In the years 1999 - 2000 two regional seismic refraction lines were performed within a close cooperation with German partners from University of Karlsruhe. One of these lines is Vrancea 2001, with 420 km in length, almost half of them recorded in Transylvanian Basin. The structure of the crust along the seismic line revealed a very complicated crustal structure beginning with Eastern Carpathians and continuing in the Transylvanian Basin until Medias. As a result of the development of the National Seismic Network in the last ten years, more than 100 permanent broadband stations are now continuously operating in Romania. Complementary to this national dataset, maintained and developed in the National Institute for Earth Physics, new data emerged from the temporary seismologic networks established during the joint projects with European partners in the last decades. The data gathered so far is valuable both for seismology purposes and crustal structure studies, especially for the western part of the country, where this kind of data were sparse until now. Between 2009 and 2011, a new reference model for the Earth’s crust and mantle of the European Plate was defined through the NERIES project from existing data and models. The database gathered from different kind of measurements in Transylvanian Basin and eastern Pannonian Basin were included in this NERIES model and an improved and upgraded model of the Earth crust emerged for western part of Romania. Although the dataset has its origins in several periods over the last 50 years, the results are homogeneous and they improve and strengthen our image about the depth of the principal boundaries in the crust. In the last chapter two maps regarding these boundaries are constructed, one for mid-crustal boundary and one for Moho. They were build considering all the punctual information available from different sources in active seismic and seismology which are introduced in the general maps from the NERIES project for

  6. A future geodetic monitoring system for vertical land motion in the Perth basin, Australia

    Science.gov (United States)

    Filmer, Mick; Featherstone, Will; Morgan, Linda; Schenk, Andreas

    2013-04-01

    SAR imagery. The InSAR component is necessary to avoid reliance on discrete monitoring stations and to provide larger scale mapping of the subsidence. As the framework for an ongoing monitoring programme, images are being acquired from the German Aerospace Centre's (DLR's) TerraSAR-X satellite mission under a collaborative science project among Geoscience Australia, Curtin University of Technology, Landgate and Karlsruhe Institute of Technology. This programme initially covers ~13 months (up to 30 images) and will provide sufficient data to lay the foundation for ongoing monitoring. This monitoring programme will be used to determine linear and non-linear VLM in Perth at time scales ranging from seasonal to long term over multiple years.

  7. Tritium release from EXOTIC-7 orthosilicate pebbles. Effect of burnup and contact with beryllium during irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reaktortechnik

    1998-03-01

    EXOTIC-7 was the first in-pile test with {sup 6}Li-enriched (50%) lithium orthosilicate (Li{sub 4}SiO{sub 4}) pebbles and with DEMO representative Li-burnup. Post irradiation examinations of the Li{sub 4}SiO{sub 4} have been performed at the Forschungszentrum Karlsruhe (FZK), mainly to investigate the tritium release kinetics as well as the effect of Li-burnup and/or contact with beryllium during irradiation. The release rate of Li{sub 4}SiO{sub 4} from pure Li{sub 4}SiO{sub 4} bed of capsule 28.1-1 is characterized by a broad main peak at about 400degC and by a smaller peak at about 800degC, and that from the mixed beds of capsule 28.2 and 26.2-1 shows again these two peaks, but most of the tritium is now released from the 800degC peak. This shift of release from low to high temperature may be due to the higher Li-burnup and/or due to contact with Be during irradiation. Due to the very difficult interpretation of the in-situ tritium release data, residence times have been estimated on the basis of the out-of-pile tests. The residence time for Li{sub 4}SiO{sub 4} from caps. 28.1-1 irradiated at 10% Li-burnup agrees quite well with that of the same material irradiated at Li-burnup lower than 3% in the EXOTIC-6 experiment. In spite of the observed shift in the release peaks from low to high temperature, also the residence time for Li{sub 4}SiO{sub 4} from caps. 26.2-1 irradiated at 13% Li-burnup agrees quite well with the data from EXOTIC-6 experiment. On the other hand, the residence time for Li{sub 4}SiO{sub 4} from caps. 28.2 (Li-burnup 18%) is about a factor 1.7-3.8 higher than that for caps. 26.2-1. Based on these data on can conclude that up to 13% Li-burnup neither the contact with beryllium nor the Li-burnup have a detrimental effect on the tritium release of Li{sub 4}SiO{sub 4} pebbles, but at 18% Li-burnup the residence time is increased by about a factor three. (J.P.N.)

  8. Bed form dynamics in distorted lightweight scale models

    Science.gov (United States)

    Aberle, Jochen; Henning, Martin; Ettmer, Bernd

    2016-04-01

    The adequate prediction of flow and sediment transport over bed forms presents a major obstacle for the solution of sedimentation problems in alluvial channels because bed forms affect hydraulic resistance, sediment transport, and channel morphodynamics. Moreover, bed forms can affect hydraulic habitat for biota, may introduce severe restrictions to navigation, and present a major problem for engineering structures such as water intakes and groynes. The main body of knowledge on the geometry and dynamics of bed forms such as dunes originates from laboratory and field investigations focusing on bed forms in sand bed rivers. Such investigations enable insight into the physics of the transport processes, but do not allow for the long term simulation of morphodynamic development as required to assess, for example, the effects of climate change on river morphology. On the other hand, this can be achieved through studies with distorted lightweight scale models allowing for the modification of the time scale. However, our understanding of how well bed form geometry and dynamics, and hence sediment transport mechanics, are reproduced in such models is limited. Within this contribution we explore this issue using data from investigations carried out at the Federal Waterways and Research Institute in Karlsruhe, Germany in a distorted lightweight scale model of the river Oder. The model had a vertical scale of 1:40 and a horizontal scale of 1:100, the bed material consisted of polystyrene particles, and the resulting dune geometry and dynamics were measured with a high spatial and temporal resolution using photogrammetric methods. Parameters describing both the directly measured and up-scaled dune geometry were determined using the random field approach. These parameters (e.g., standard deviation, skewness, kurtosis) will be compared to prototype observations as well as to results from the literature. Similarly, parameters describing the lightweight bed form dynamics, which

  9. [A historic case of Wegener's granulomatosis: the physicist who discovered the electromagnetic waves: Heinrich Hertz].

    Science.gov (United States)

    Feldmann, H

    2005-06-01

    A diary and an extensive correspondence of Heinrich Hertz and his family provide a meticulous documentation of his life, made available by Albrecht Folsing in 1997 through a carefully investigated biography, which permit the conclusion that H. Hertz died of Wegener's granulomatosis, 45 years before this disease had been explored. WEGENER'S GRANULOMATOSIS: The symptoms of the granulomatosis, that was first described by Friedrich Wegener in 1936 and 1939 are presented in short with literal quotations of the author: It begins with a refractory cold that will last until the end, then follow involvement of the paranasal sinuses, ears, mucous lining of mouth and pharynx, slight fever, weakness, in the final phase dissemination with nephritis, septic fever, arthritis, myalgia, paralyses leading to total immobility, exitus. The etiology is not fully understood but probably based on immunoreaction. H. HERTZ: CURRICULUM VITAE: Born in Hamburg, Germany, in 1857: after secondary school academic training in physics at Dresden, Munic and Berlin. 1885 professor of physics in Karlsruhe, then starting in 1889 at Bonn. 1887/88 exploration of the electromagnetic waves, now the basis for all radio communication, and exploration of the photoelectric effect, the basis of solar techniques. Numerous highranking distinctions. H. HERTZ: The case history is presented in detail based on numerous literal quotations from personal letters and the diary. After a few banal affections involving the teeth and toes the systemic disease became manifest in summer 1892 with a refractory cold which remained the focus of treatment until death. Granulation tissue in the nose that was excised several times: no tuberculosis, no carcinoma. Otitis with purulent mastoiditis, in October 1892 mastoidectomy, persistent purulence. Early in 1893 diagnosis of nephritis. Extraction of a superior tooth, punturing of the maxillary sinus, then twice radical opening of the maxillary sinus. Painful ankylosis and paralyses

  10. Nuclear safety research in HGF 2012; Fortschrittsbericht 2012. Programm 'Nukleare Sicherheitsforschung' Helmholtz-Gemeinschaft

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2013-06-15

    in the Nuclear Competence Association. The Forschungszentrum Juelich GmbH, HZDR Helmholtz-Zentrum Dresden-Rossendorf and the KIT Karlsruhe Institute of Technology are involved in the Nuclear Safety Research Program within the Helmholtz Association. The work and results in 2012 are presented. (orig.)

  11. Restoring the azimuthal symmetry of lateral distributions of charged particles in the range of the KASCADE-Grande experiment

    Energy Technology Data Exchange (ETDEWEB)

    Sima, O., E-mail: Octavian.Sima@kit.ed [Department of Physics, University of Bucharest, Bucharest (Romania); Rebel, H.; Haungs, A. [Karlsruhe Institute of Technology - Campus North, Institut fuer Kernphysik, Karlsruhe (Germany); Toma, G. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Manailescu, C.; Morariu, C. [Department of Physics, University of Bucharest, Bucharest (Romania); Arteaga, J.C. [Universidad Michoacana, Morelia (Mexico); Bekk, K. [Karlsruhe Institute of Technology - Campus North, Institut fuer Kernphysik, Karlsruhe (Germany); Bertaina, M. [Dipartimento di Fisica Generale dell' Universita di Torino (Italy); Bluemer, J. [Karlsruhe Institute of Technology - Campus North, Institut fuer Kernphysik, Karlsruhe (Germany); Karlsruhe Institute of Technology - Campus South, Institut fuerExperimentelle Kernphysik, Karlsruhe (Germany); Bozdog, H. [Karlsruhe Institute of Technology - Campus North, Institut fuer Kernphysik, Karlsruhe (Germany); Brancus, I.M. [National Institute of Physics and Nuclear Engineering, Bucharest (Romania); Chiavassa, A. [Dipartimento di Fisica Generale dell' Universita di Torino (Italy); Cosavella, F. [Max-Planck Institut fuer Physik, Muenchen (Germany); Souza, V. de [Universidade Sao Paolo, Sao Paolo (Brazil); Doll, P.; Engel, R. [Karlsruhe Institute of Technology - Campus North, Institut fuer Kernphysik, Karlsruhe (Germany); Finger, M. [Karlsruhe Institute of Technology - Campus South, Institut fuer Experimentelle Kernphysik, Karlsruhe (Germany); Glasstetter, R. [Bergische Universitaet Wuppertal, Fachbereich Physik, Wuppertal (Germany); Grupen, C. [Universitaet Siegen, Experimentelle Teilchenphysik, Siegen (Germany)

    2011-05-11

    The reconstruction of Extensive Air Showers (EAS) observed by particle detectors at the ground is based on the characteristics of observables like the lateral particle density and the arrival times. The lateral densities, inferred for different EAS components from detector data, are usually parameterised by applying various lateral distribution functions (LDFs). The LDFs are used in turn for evaluating quantities like the total number of particles or the density at particular radial distances. Typical expressions for LDFs anticipate azimuthal symmetry of the density around the shower axis. The deviations of the lateral particle density from this assumption arising from various reasons are smoothed out in the case of compact arrays like KASCADE, but not in the case of arrays like Grande, which only sample a smaller part of the azimuthal variation. KASCADE-Grande, an extension of the former KASCADE experiment, is a multi-component Extensive Air Shower (EAS) experiment located at the Karlsruhe Institute of Technology (Campus North), Germany. The lateral distributions of charged particles are deduced from the basic information provided by the Grande scintillators - the energy deposits - first in the observation plane, then in the intrinsic shower plane. In all steps azimuthal dependences should be taken into account. As the energy deposit in the scintillators is dependent on the angles of incidence of the particles, azimuthal dependences are already involved in the first step: the conversion from the energy deposits to the charged particle density. This is done by using the Lateral Energy Correction Function (LECF) that evaluates the mean energy deposited by a charged particle taking into account the contribution of other particles (e.g. photons) to the energy deposit. By using a very fast procedure for the evaluation of the energy deposited by various particles we prepared realistic LECFs depending on the angle of incidence of the shower and on the radial and

  12. New insights of seismic disturbances due to wind turbines - long and short term measurements in SW Germany

    Science.gov (United States)

    Zieger, Toni; Ritter, Joachim

    2017-04-01

    Natural Resources" and "KArlsruher BroadBand Array (KABBA)". Meteorological data were provided by "KIT Institute of Meteorology and Climate Research - Department Troposphere Research".

  13. Satellite observation of lowermost tropospheric ozone by multispectral synergism of IASI thermal infrared and GOME-2 ultraviolet measurements over Europe

    Directory of Open Access Journals (Sweden)

    J. Cuesta

    2013-10-01

    Full Text Available We present a new multispectral approach for observing lowermost tropospheric ozone from space by synergism of atmospheric radiances in the thermal infrared (TIR observed by IASI (Infrared Atmospheric Sounding Interferometer and earth reflectances in the ultraviolet (UV measured by GOME-2 (Global Ozone Monitoring Experiment-2. Both instruments are onboard the series of MetOp satellites (in orbit since 2006 and expected until 2022 and their scanning capabilities offer global coverage every day, with a relatively fine ground pixel resolution (12 km-diameter pixels spaced by 25 km for IASI at nadir. Our technique uses altitude-dependent Tikhonov–Phillips-type constraints, which optimize sensitivity to lower tropospheric ozone. It integrates the VLIDORT (Vector Linearized Discrete Ordinate Radiative Transfer and KOPRA (Karlsruhe Optimized and Precise Radiative transfer Algorithm radiative transfer codes for simulating UV reflectance and TIR radiance, respectively. We have used our method to analyse real observations over Europe during an ozone pollution episode in the summer of 2009. The results show that the multispectral synergism of IASI (TIR and GOME-2 (UV enables the observation of the spatial distribution of ozone plumes in the lowermost troposphere (LMT, from the surface up to 3 km a.s.l., above sea level, in good agreement with the CHIMERE regional chemistry-transport model. In this case study, when high ozone concentrations extend vertically above 3 km a.s.l., they are similarly observed over land by both the multispectral and IASI retrievals. On the other hand, ozone plumes located below 3 km a.s.l. are only clearly depicted by the multispectral retrieval (both over land and over ocean. This is achieved by a clear enhancement of sensitivity to ozone in the lowest atmospheric layers. The multispectral sensitivity in the LMT peaks at 2 to 2.5 km a.s.l. over land, while sensitivity for IASI or GOME-2 only peaks at 3 to 4 km a.s.l. at lowest

  14. ARIS-Campaign: intercomparison of three ground based 22 GHz radiometers for middle atmospheric water vapor at the Zugspitze in winter 2009

    Science.gov (United States)

    Straub, C.; Murk, A.; Kämpfer, N.; Golchert, S. H. W.; Hochschild, G.; Hallgren, K.; Hartogh, P.

    2011-09-01

    This paper presents the Alpine Radiometer Intercomparison at the Schneefernerhaus (ARIS), which took place in winter 2009 at the high altitude station at the Zugspitze, Germany (47.42° N, 10.98° E, 2650 m). This campaign was the first direct intercomparison between three new ground based 22 GHz water vapor radiometers for middle atmospheric profiling with the following instruments participating: MIRA 5 (Karlsruhe Institute of Technology), cWASPAM3 (Max Planck Institute for Solar System Research, Katlenburg-Lindau) and MIAWARA-C (Institute of Applied Physics, University of Bern). Even though the three radiometers all measure middle atmospheric water vapor using the same rotational transition line and similar fundamental set-ups, there are major differences between the front ends, the back ends, the calibration concepts and the profile retrieval. The spectrum comparison shows that all three radiometers measure spectra without severe baseline artifacts and that the measurements are in good general agreement. The measurement noise shows good agreement to the values theoretically expected from the radiometer noise formula. At the same time the comparison of the noise levels shows that there is room for instrumental and calibration improvement, emphasizing the importance of low elevation angles for the observation, a low receiver noise temperature and an efficient calibration scheme. The comparisons of the retrieved profiles show that the agreement between the profiles of MIAWARA-C and cWASPAM3 with the ones of MLS is better than 0.3 ppmv (6%) at all altitudes. MIRA 5 has a dry bias of approximately 0.5 ppm (8%) below 0.1 hPa with respect to all other instruments. The profiles of cWASPAM3 and MIAWARA-C could not be directly compared because the vertical region of overlap was too small. The comparison of the time series at different altitude levels show a similar evolution of the H2O volume mixing ratio (VMR) for the ground based instruments as well as the space borne

  15. Multicenter, open-label, exploratory clinical trial with Rhodiola rosea extract in patients suffering from burnout symptoms

    Directory of Open Access Journals (Sweden)

    Kasper S

    2017-03-01

    Full Text Available Siegfried Kasper,1 Angelika Dienel2 1Universitätsklinik für Psychiatrie und Psychotherapie, Medizinische Universität Wien, Wien, Austria; 2Dr Willmar Schwabe GmbH & Co. KG, Karlsruhe, Germany Purpose: This study is the first clinical trial aiming to explore the clinical outcomes in burnout patients treated with Rhodiola rosea. The reported capacity of R. rosea to strengthen the organism against stress and its good tolerability offer a promising approach in the treatment of stress-related burnout. The aim of the treatment was to increase stress resistance, thus addressing the source rather than the symptoms of the syndrome and preventing subsequent diseases associated with a history of burnout. The objective of the trial was to provide the exploratory data required for planning future randomized trials in burnout patients in order to investigate the clinical outcomes of treatment with R. rosea dry extract in this target group.Methods: The study was planned as an exploratory, open-label, multicenter, single-arm trial. A wide range of rating scales were assessed and evaluated in an exploratory data analysis to generate hypotheses regarding clinical courses and to provide a basis for the planning of subsequent studies. A total of 118 outpatients were enrolled. A daily dose of 400 mg R. rosea extract (WS® 1375, Rosalin was administered over 12 weeks. Clinical outcomes were assessed by the German version of the Maslach Burnout Inventory, Burnout Screening Scales I and II, Sheehan Disability Scale, Perceived Stress Questionnaire, Number Connection Test, Multidimensional Mood State Questionnaire, Numerical Analogue Scales for different stress symptoms and impairment of sexual life, Patient Sexual Function Questionnaire, and the Clinical Global Impression Scales. Results: The majority of the outcome measures showed clear improvement over time. Several parameters had already improved after 1 week of treatment and continued to improve further up to

  16. Manipulator-deployed laser decontamination system. Final report; MANipulator gesteuerter Oberflaechenabtrag durch LAsertechnologie (MANOLA). Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Littwin, Rene; Hurtado, Antonio; Lippmann, Wolfgang

    2011-09-15

    Project aim is the development of a manipulator-deployed system using laser technology to ablate radioactive concrete surfaces. Manipulator technology competences of Karlsruhe Institute of Technology (KIT) and competences of TU Dresden (TUD) using laser technology for the ablation of surfaces were successfully combined. The report presents the results that were accomplished at TU Dresden. In the first part, the state of development in decommissioning of nuclear facilities in Germany and Europe is presented and technologies commonly used are being identified and compared. So requirements have been derived from this data base to be fulfilled by the laser decontamination technology and the carrier system. Using the results of the research project LASABA II (FKZ: 02S8356, completed in 2008) for optimized laser ablation of concrete surfaces, the technology has been further developed in order to use it as a fully remote controlled device in combination with a manipulator as carrier system. Therefore, the laser ablation unit was equipped with a sensor system developed within this project. Together with the manipulator the latter serves as a basis for the system to be used under industrial conditions. The performance of the laser decontamination system was increased by adapting it to an enhanced diode laser with 10 kW laser power recently put into operation at TU Dresden. The performance of the single components was analysed and verified in several experiments. This includes tests with obstacles of different shapes and sizes occurring in real nuclear power plants like metal bolts, screws and edges. The experiments show that small metal parts are ablated by the laser decontamination system, while bigger parts, which would otherwise damage the system, are detected by the sensors. Thereby, the system is able to avoid these big metal parts. In cooperation with E.ON Kernkraft, concrete samples from the nuclear power plant in Wuergassen were used to show that the developed

  17. The Cost-Optimal Distribution of Wind and Solar Generation Facilities in a Simplified Highly Renewable European Power System

    Science.gov (United States)

    Kies, Alexander; von Bremen, Lüder; Schyska, Bruno; Chattopadhyay, Kabitri; Lorenz, Elke; Heinemann, Detlev

    2016-04-01

    . "Investigation of balancing effects in long term renewable energy feed-in with respect to the transmission grid." Advances in Science and Research 12.1 (2015): 91-95, doi:10.5194/asr-12-91-2015 [2] Heide, Dominik, et al. "Reduced storage and balancing needs in a fully renewable European power system with excess wind and solar power generation." Renewable Energy 36.9 (2011): 2515-2523 [3] Rodriguez, R.A.: Weather-driven power transmission in a highly renewable European electricity network, PhD Thesis, Aarhus University, November 2014 [4] Pfluger, B. et al.: Tangible ways towards climate protection in the European Union (EU long-term scenarios 2050), Fraunhofer ISI, Karlsruhe, September 2011

  18. re3data.org - a global registry of research data repositories

    Science.gov (United States)

    Pampel, Heinz; Vierkant, Paul; Elger, Kirsten; Bertelmann, Roland; Witt, Michael; Schirmbacher, Peter; Rücknagel, Jessika; Kindling, Maxi; Scholze, Frank; Ulrich, Robert

    2016-04-01

    re3data.org - the registry of research data repositories lists over 1,400 research data repositories from all over the world making it the largest and most comprehensive online catalog of research data repositories on the web. The registry is a valuable tool for researchers, funding organizations, publishers and libraries. re3data.org provides detailed information about research data repositories, and its distinctive icons help researchers to easily identify relevant repositories for accessing and depositing data sets [1]. Funding agencies, like the European Commission [2] and research institutions like the University of Bielefeld [3] already recommend the use of re3data.org in their guidelines and policies. Several publishers and journals like Copernicus Publications, PeerJ, and Nature's Scientific Data recommend re3data.org in their editorial policies as a tool for the easy identification of appropriate data repositories to store research data. Project partners in re3data.org are the Library and Information Services department (LIS) of the GFZ German Research Centre for Geosciences, the Computer and Media Service at the Humboldt-Universität zu Berlin, the Purdue University Libraries and the KIT Library at the Karlsruhe Institute of Technology (KIT). After its fusion with the U.S. American DataBib in 2014, re3data.org continues as a service of DataCite from 2016 on. DataCite is the international organization for the registration of Digital Object Identifiers (DOI) for research data and aims to improve their citation. The poster describes the current status and the future plans of re3data.org. [1] Pampel H, et al. (2013) Making Research Data Repositories Visible: The re3data.org Registry. PLoS ONE 8(11): e78080. doi:10.1371/journal.pone.0078080. [2] European Commission (2015): Guidelines on Open Access to Scientific Publications and Research Data in Horizon 2020. Available: http://ec.europa.eu/research/participants/data/ref/h2020/grants_manual/hi/oa_pilot/h2020-hi

  19. X-ray spectroscopy of the pionic deuterium atom

    Energy Technology Data Exchange (ETDEWEB)

    Chatellard, D.; Egger, J.-P.; Jeannet, E. [Neuchatel Univ. (Switzerland). Inst. de Physique; Badertscher, A.; Bogdan, M.; Goudsmit, P.F.A.; Janousch, M.; Leisi, H.J.; Matsinos, E.; Schroeder, H.-C.; Sigg, D.; Zhao, Z.G. [Institut fuer Teilchenphysik der ETHZ, CH-5232 Villigen PSI (Switzerland); Aschenauer, E.C.; Gabathuler, K.; Hauser, P.; Simons, L.M. [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Rusi El Hassani, A.J. [Ecole Mohammadia des Ingenieurs, Rabat (Morocco)

    1997-11-10

    The low energy X-rays of the pionic deuterium 3P-1S transition were measured using a high resolution crystal spectrometer, together with a cyclotron trap (a magnetic device to increase the pion stopping density) and a CCD (charge-coupled device) detector system. The spectrometer resolution was 0.65 eV FWHM for a measured energy of approximately 3075 eV. This energy was measured with a precision of 0.1 eV. Compared to conventional methods, the cyclotron trap allowed for a gain in stopping density of about an order of magnitude. The CCDs had excellent spatial and energy resolutions. Non-X-ray background could therefore be almost completely eliminated. The 1S strong interaction shift {epsilon}{sub 1S} and total decay width {Gamma}{sub 1S} were determined from the position and line shape of the X-ray peak. They are {epsilon}{sub 1S}(shift)=2.43{+-}0.10 eV (repulsive), {Gamma}{sub 1S}(width)=1.02{+-}0.21 eV, where the statistical and systematic errors were added linearly. The total (complex) pionic deuterium S-wave scattering length a{sub {pi}{sup -}d} was deduced: a{sub {pi}{sup -}d}=-0.0259({+-}0.0011)+i0. 0054({+-}0.0011)m{sub {pi}}{sup -1}. From the real part of a{sub {pi}{sup -}d} a constraint in terms of the isoscalar and isovector {pi}N scattering lengths b{sub 0} and b{sub 1} was deduced. From Im a{sub {pi}{sup -}d} we determined the isoscalar coupling constant for {pi}{sup -} absorption: vertical stroke g{sub 0} vertical stroke =(2.6{+-}0.3)10{sup -2}m{sub {pi}}{sup -2}. The experiments of the pionic hydrogen and deuterium S-wave scattering lengths were analyzed within the framework of a search for isospin symmetry violation. The data are still compatible with isospin conservation. The scattering lengths deduced from the Karlsruhe-Helsinki phase shift analysis disagree with the present results. (orig.). 45 refs.

  20. Efficacy and tolerability of Ginkgo biloba extract EGb 761® in dementia: a systematic review and meta-analysis of randomized placebo-controlled trials

    Directory of Open Access Journals (Sweden)

    Gauthier S

    2014-11-01

    Full Text Available Serge Gauthier,1 Sandra Schlaefke2 1Alzheimer Disease Research Unit, Memory Clinic, McGill Centre for Studies in Aging, McGill University, Verdun, QC, Canada; 2Clinical Research Department, Dr Willmar Schwabe GmbH & Co. KG, Karlsruhe, Germany Abstract: The objective of this systematic review was to evaluate current evidence for the efficacy of Ginkgo biloba extract EGb 761® in dementia. Seven of 15 randomized, placebo-controlled trials in patients with dementia identified by database searches met all our selection criteria and were included in the meta-analysis. In these trials, patients were treated with 120 mg or 240 mg per day of the defined extract EGb 761 or placebo. Efficacy was assessed using validated tests and rating scales for the cognitive domain, the functional domain (activities of daily living, and global assessment. Tolerability was evaluated by risk differences based on incidences of adverse events and premature discontinuation rates. Of 2,684 outpatients randomized to receive treatment for 22–26 weeks, 2,625 represented the full analysis sets (1,396 for EGb 761 and 1,229 for placebo. Standardized mean differences for change in cognition (-0.52; 95% confidence interval [CI] -0.98, -0.05; P=0.03, activities of daily living (-0.44; 95% CI -0.68, -0.19; P<0.001, and global rating (-0.52; 95% CI -0.92, -0.12; P=0.01 significantly favored EGb 761 compared with placebo. Statistically significant superiority of EGb 761 over placebo was confirmed by responder analyses as well as for patients suffering from dementia with neuropsychiatric symptoms. Treatment-associated risks in terms of relative risks of adverse events and premature withdrawal rates did not differ noticeably between the two treatment groups. In conclusion, meta-analyses confirmed the efficacy and good tolerability of Ginkgo biloba extract EGb 761 in patients with dementia. Keywords: Alzheimer’s disease, vascular dementia, mixed dementia, efficacy, safety

  1. Observation of mesospheric air inside the arctic stratospheric polar vortex in early 2003

    Directory of Open Access Journals (Sweden)

    A. Engel

    2006-01-01

    Full Text Available During several balloon flights inside the Arctic polar vortex in early 2003, unusual trace gas distributions were observed, which indicate a strong influence of mesospheric air in the stratosphere. The tuneable diode laser (TDL instrument SPIRALE (Spectroscopie Infra-Rouge par Absorption de Lasers Embarqués measured unusually high CO values (up to 600 ppb on 27 January at about 30 km altitude. The cryosampler BONBON sampled air masses with very high molecular Hydrogen, extremely low SF6 and enhanced CO values on 6 March at about 25 km altitude. Finally, the MIPAS (Michelson Interferometer for Passive Atmospheric Sounding Fourier Transform Infra-Red (FTIR spectrometer showed NOy values which are significantly higher than NOy* (the NOy derived from a correlation between N2O and NOy under undisturbed conditions, on 21 and 22 March in a layer centred at 22 km altitude. Thus, the mesospheric air seems to have been present in a layer descending from about 30 km in late January to 25 km altitude in early March and about 22 km altitude on 20 March. We present corroborating evidence from a model study using the KASIMA (KArlsruhe SImulation model of the Middle Atmosphere model that also shows a layer of mesospheric air, which descended into the stratosphere in November and early December 2002, before the minor warming which occurred in late December 2002 lead to a descent of upper stratospheric air, cutting off a layer in which mesospheric air is present. This layer then descended inside the vortex over the course of the winter. The same feature is found in trajectory calculations, based on a large number of trajectories started in the vicinity of the observations on 6 March. Based on the difference between the mean age derived from SF6 (which has an irreversible mesospheric loss and from CO2 (whose mesospheric loss is much smaller and reversible we estimate that the fraction of mesospheric air in the layer observed on 6 March, must have been

  2. Global distribution of mean age of stratospheric air from MIPAS SF6 measurements

    Directory of Open Access Journals (Sweden)

    H. Fischer

    2008-02-01

    confirm that SF6 is destroyed in the mesosphere to a considerable degree. Model calculations with the Karlsruhe simulation model of the middle atmosphere (KASIMA chemical transport model agree well with observed global distributions of the mean age only if the SF6 sink reactions in the mesosphere are included in the model.

  3. Hydrological improvements for nutrient and pollutant emission modeling in large scale catchments

    Science.gov (United States)

    Höllering, S.; Ihringer, J.

    2012-04-01

    hydrological system is simulated spatially differentiated and emissions from urban and rural areas into river courses can be detected separately. In the Ruhr catchment (4.485 km2) as a right tributary of the Rhine located in the lower mountain range of North Rhine-Westphalia in Germany for the validation period 2002-2006 the hydrological model showed first satisfying results. The feasibility study in the Ruhr shows the suitability of the approach and illustrates the potentials for further developments in terms of an implementation throughout the German and contiguous watersheds. IWG, Karlsruhe Institute of Technology (KIT). 2011. http://isww.iwg.kit.edu/MoRE.php. [Online] Institute for Water and River Basin Management, Department of Aquatic Environmental Engineering, October 2011. USGS, U.S. Geological Survey. 2009. PRMS-2009, the Precipitation-Runoff Modeling System. Denver, Colorado : s.n., 2009. Bd. U.S. Geologic Survey Open File Report.

  4. The DACCIWA 2016 radiosonde campaign in southern West Africa

    Science.gov (United States)

    Fink, Andreas H.; Maranan, Marlon; Knippertz, Peter; Ngamini, Jean-Blaise; Francis, Sabastine

    2017-04-01

    Operational upper-air stations are very sparsely distributed over West Africa, resulting in the necessity to enhance radiosonde observations for the DACCIWA (Dynamics-Aerosol-Chemistry-Cloud Interactions in West Africa) experimental period during June-July 2016. Building on the AMMA (African Monsoon - Multidisciplinary Analyses) experience, existing infrastructures, as well as human networks, the upper air network was successfully augmented to a spatial density that is unprecedented for southern West Africa. Altogether, more than 750 experimental radiosondes were launched at seven stations in three countries along the Guinea Coast. From its outset, the DACCIWA radiosonde campaign had three pillars: (a) enhancing soundings at operational or quiescent AMMA radiosonde stations; (b) launching sondes at DACCIWA supersites and two additional DACCIWA field sites; and (c) collecting standard and - if possible - high-resolution data from other operational RS stations. In terms of (a), it was found during preparing recce visits to West Africa, that the AMMA-activated stations of Cotonou (Benin) and Abuja (Nigeria) were operational though almost "invisible" on the World Meteorological Organisation's Global Teleconnection System (GTS). These and other AMMA legacies facilitated the implementation of enhanced, four-times daily soundings at Abidjan (Ivory Coast), Cotonou and Parakou (both Benin). Two well-instrumented DACCIWA ground sites at Kumasi (Ghana) and Savé (Benin) performed 06 UTC soundings, being enhanced to four-times daily ascents during fifteen Intensive Observing Periods (IOPs). In addition, research staff and students from the Karlsruhe Institute of Technology (KIT) and African partners conducted up to five-times daily soundings at Lamto (Ivory Coast) and Accra (Ghana). Almost all of the experimental DACCIWA ascents were submitted to the GTS in real time and assimilated at least at three European numerical weather prediction centres that helped to improve their

  5. Validation of MIPAS IMK/IAA temperature, water vapor, and ozone profiles with MOHAVE-2009 campaign measurements

    Directory of Open Access Journals (Sweden)

    G. P. Stiller

    2012-02-01

    Full Text Available MIPAS observations of temperature, water vapor, and ozone in October 2009 as derived with the scientific level-2 processor run by Karlsruhe Institute of Technology (KIT, Institute for Meteorology and Climate Research (IMK and CSIC, Instituto de Astrofísica de Andalucía (IAA and retrieved from version 4.67 level-1b data have been compared to co-located field campaign observations obtained during the MOHAVE-2009 campaign at the Table Mountain Facility near Pasadena, California in October 2009. The MIPAS measurements were validated regarding any potential biases of the profiles, and with respect to their precision estimates. The MOHAVE-2009 measurement campaign provided measurements of atmospheric profiles of temperature, water vapor/relative humidity, and ozone from the ground to the mesosphere by a suite of instruments including radiosondes, ozonesondes, frost point hygrometers, lidars, microwave radiometers and Fourier transform infra-red (FTIR spectrometers. For MIPAS temperatures (version V4O_T_204, no significant bias was detected in the middle stratosphere; between 22 km and the tropopause MIPAS temperatures were found to be biased low by up to 2 K, while below the tropopause, they were found to be too high by the same amount. These findings confirm earlier comparisons of MIPAS temperatures to ECMWF data which revealed similar differences. Above 12 km up to 45 km, MIPAS water vapor (version V4O_H2O_203 is well within 10% of the data of all correlative instruments. The well-known dry bias of MIPAS water vapor above 50 km due to neglect of non-LTE effects in the current retrievals has been confirmed. Some instruments indicate that MIPAS water vapor might be biased high by 20 to 40% around 10 km (or 5 km below the tropopause, but a consistent picture from all comparisons could not be derived. MIPAS ozone (version V4O_O3_202 has a high bias of up to +0.9 ppmv around 37 km which is due to a non-identified continuum like radiance contribution

  6. ARIS-Campaign: intercomparison of three ground based 22 GHz radiometers for middle atmospheric water vapor at the Zugspitze in winter 2009

    Directory of Open Access Journals (Sweden)

    C. Straub

    2011-09-01

    Full Text Available This paper presents the Alpine Radiometer Intercomparison at the Schneefernerhaus (ARIS, which took place in winter 2009 at the high altitude station at the Zugspitze, Germany (47.42° N, 10.98° E, 2650 m. This campaign was the first direct intercomparison between three new ground based 22 GHz water vapor radiometers for middle atmospheric profiling with the following instruments participating: MIRA 5 (Karlsruhe Institute of Technology, cWASPAM3 (Max Planck Institute for Solar System Research, Katlenburg-Lindau and MIAWARA-C (Institute of Applied Physics, University of Bern. Even though the three radiometers all measure middle atmospheric water vapor using the same rotational transition line and similar fundamental set-ups, there are major differences between the front ends, the back ends, the calibration concepts and the profile retrieval. The spectrum comparison shows that all three radiometers measure spectra without severe baseline artifacts and that the measurements are in good general agreement. The measurement noise shows good agreement to the values theoretically expected from the radiometer noise formula. At the same time the comparison of the noise levels shows that there is room for instrumental and calibration improvement, emphasizing the importance of low elevation angles for the observation, a low receiver noise temperature and an efficient calibration scheme.

    The comparisons of the retrieved profiles show that the agreement between the profiles of MIAWARA-C and cWASPAM3 with the ones of MLS is better than 0.3 ppmv (6% at all altitudes. MIRA 5 has a dry bias of approximately 0.5 ppm (8% below 0.1 hPa with respect to all other instruments. The profiles of cWASPAM3 and MIAWARA-C could not be directly compared because the vertical region of overlap was too small. The comparison of the time series at different altitude levels show a similar evolution of the H2O volume mixing ratio (VMR for the ground based

  7. Real-time Forensic Disaster Analysis

    Science.gov (United States)

    Wenzel, F.; Daniell, J.; Khazai, B.; Mühr, B.; Kunz-Plapp, T.; Markus, M.; Vervaeck, A.

    2012-04-01

    The Center for Disaster Management and Risk Reduction Technology (CEDIM, www.cedim.de) - an interdisciplinary research center founded by the German Research Centre for Geoscience (GFZ) and Karlsruhe Institute of Technology (KIT) - has embarked on a new style of disaster research known as Forensic Disaster Analysis. The notion has been coined by the Integrated Research on Disaster Risk initiative (IRDR, www.irdrinternational.org) launched by ICSU in 2010. It has been defined as an approach to studying natural disasters that aims at uncovering the root causes of disasters through in-depth investigations that go beyond the reconnaissance reports and case studies typically conducted after disasters. In adopting this comprehensive understanding of disasters CEDIM adds a real-time component to the assessment and evaluation process. By comprehensive we mean that most if not all relevant aspects of disasters are considered and jointly analysed. This includes the impact (human, economy, and infrastructure), comparisons with recent historic events, social vulnerability, reconstruction and long-term impacts on livelihood issues. The forensic disaster analysis research mode is thus best characterized as "event-based research" through systematic investigation of critical issues arising after a disaster across various inter-related areas. The forensic approach requires (a) availability of global data bases regarding previous earthquake losses, socio-economic parameters, building stock information, etc.; (b) leveraging platforms such as the EERI clearing house, relief-web, and the many sources of local and international sources where information is organized; and (c) rapid access to critical information (e.g., crowd sourcing techniques) to improve our understanding of the complex dynamics of disasters. The main scientific questions being addressed are: What are critical factors that control loss of life, of infrastructure, and for economy? What are the critical interactions

  8. Gender issues in planning with water

    Science.gov (United States)

    Bostenaru-Dan, Maria; Olga Gociman, Cristina

    2016-04-01

    Numerous cities have (re)discovered their waterside landscapes as urban space and use their landscapal, urban, and architectural potentials to make a riverine city attractive. The fact that some cities only turn today to their rivers lays in the fact that in the past centuries it seemed wiser to build far from the river - it is the case of for example Karlsruhe and the Rhine - as from the river not only blessing, but also danger came. The proposed presentation aims in a first stage to investigate this ambivalence: in the meaning of the water itself. For this purpose views from science and the arts will be embedded. For the science stay insights from engineering hydrology. For the arts stay (urban) landscape planning up to museum planning, ex. a museum of water (incl. aquaria), debating both the content and the container. In a second step the discussion will focus even more on dealing with disasters. Building along the river is not only hazardous in what concerns flooding risk, but also for earthquake impact. Long distance earthquakes can have disastrous effects on high-density urban settlements, if alluvial soil deposits amplify the ground motion, in the case of cities built on river banks. Regarding natural hazards protection a different ambivalence can be identified. Providing safe housing leads to partly antagonic construction requirements in case of envisaging reducing flood and earthquake impact (for example presence or absence of basement spaces). For the purpose of opening discussion along these lines each an introduction on physical flood vulnerability and physical earthquake vulnerability will be made. In this paper a particular focus will be given to architecture at and with water by women. Women are a vulnerable social group when it comes to hazards, and have to be considered accordingly. Their perception of risk and their vulnerability are different. Also, the perception of women architecture varied particularly at pioneering times, and some of their

  9. Tritium release from neutron irradiated beryllium: Kinetics, long-time annealing and effect or crack formation

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe, (Germany)

    1995-09-01

    Since beryllium is considered as one of the best neutron multiplier materials in the blanket of the next generation fusion reactors, several studies have been started to evaluate its behaviour under irradiation during both operating and accidental conditions. Based on safety considerations, tritium produced in beryllium during neutron irradiation represents one important issue, therefore it is necessary to investigate tritium transport processes by using a comprehensive mathematical model and comparing its predictions with well characterized experimental tests. Because of the difficulties in extrapolating the short-time tritium release tests to a longer time scale, also long-time annealing experiments with beryllium samples from the SIBELIUS irradiation. have been carried out at the Forschungszentrum Karlsruhe. Samples were annealed up to 12 months at temperatures up to 650{degrees}C. The inventory after annealing was determined by heating the samples up to 1050{degrees}C with a He+0.1 vo1% H{sub 2} purge gas. Furthermore, in order to investigate the likely effects of cracks formation eventually causing a faster tritium release from beryllium, the behaviour of samples irradiated at low temperature (40-50{degrees}C) but up to very high fast neutron fluences (0.8-3.9{center_dot}10{sup 22} cm{sup -2}, E{sub n}{ge}1 MeV) in the BR2 reactor has been investigated. Tritium was released by heating the beryllium samples up to 1050{degrees}C and purging them with He+0.1 vo1% H{sub 2}. Tritium release from high-irradiated beryllium samples showed a much faster kinetics than from the low-irradiated ones, probably because of crack formation caused by thermal stresses in the brittle material and/or by helium bubbles migration. The obtained experimental data have been compared with predictions of the code ANFIBE with the goal to better understand the physical mechanisms governing tritium behaviour in beryllium and to assess the prediction capabilities of the code.

  10. Cryosorbent characterization of activated charcoal in the COOLSORP facility. Final report on Subtask 8 of task VP1: cryopump development and testing (ITER task no. 448)

    Energy Technology Data Exchange (ETDEWEB)

    Hauer, V.; Day, C.

    2002-09-01

    At Forschungszentrum Karlsruhe, a special cryovacuum pump system is being developed for use in the ITER nuclear fusion reactor. At the operation temperature of about 5 K, practically all gases can be condensed easily, except of helium and hydrogen isotopes. To bind these species as well, the panels are coated with sorbent materials. Best pumping characteristics are achieved with activated charcoal. For the basic design of such cryosorption pumps, isotherm data are strongly needed, which are extremely scarce, especially at temperatures between 4.2 K (LHe) and 77.3 K (LN2). Therefore, the novel continuous sorption device COOLSORP was developed to measure sorption characteristics up to atmospheric pressure under variable temperature cryogenic conditions. The facility is based on a commercially available pore-analyser (continuous sorption method), upgraded by a heatable closed He cycle two-stage Gifford McMahon refrigerator. This report gives an overview about the experimental programme performed over the last two years. For qualification of the new facility and for comparison reason, standard measurements with nitrogen at 77 K were performed. However, the emphasis of the experimental was placed on low temperature sorption isotherms (experimental and correlated data) of gases with special relevance for cryosorption vacuum pumping, like helium and hydrogen, in both the sub- and the supercritical temperature range, whenever possible. The parametric measurements were focussed on a special, commercially available, granular coconut-shell based charcoal (CHEMVIRON SC 2), which was shown to have excellent vacuum pumping performance and, thus, has become the candidate for nuclear fusion application (ITER reference material). Prior to the measurements, preliminary tests were driven to set the facility into operation properly, to confirm the applicability of the experimental method used and to calibrate the measuring instruments. Pore size information was then derived from the

  11. Molecular Basis of the Divergent Immunogenicity of Two Pediatric Tick-Borne Encephalitis Virus Vaccines.

    Science.gov (United States)

    Beck, Yvonne; Fritz, Richard; Orlinger, Klaus; Kiermayr, Stefan; Ilk, Reinhard; Portsmouth, Daniel; Pöllabauer, Eva-Maria; Löw-Baselli, Alexandra; Hessel, Annett; Kölch, Doris; Howard, M Keith; Barrett, P Noel; Kreil, Thomas R

    2015-12-09

    Studies evaluating the immunogenicity of two pediatric tick-borne encephalitis virus (TBEV) vaccines have reported contradictory results. These vaccines are based on two different strains of the European TBEV subtype: FSME-Immun Junior is based on the Neudörfl (Nd) strain, whereas Encepur Children is based on the Karlsruhe (K23) strain. The antibody (Ab) response induced by these two vaccines might be influenced by antigenic differences in the envelope (E) protein, which is the major target of neutralizing antibodies. We used an established hybrid virus assay platform to compare the levels of induction of neutralizing antibodies against the two vaccine virus strains in children aged 1 to 11 years who received two immunizations with FSME-Immun Junior or Encepur Children. The influence of amino acid differences between the E proteins of the Nd and K23 vaccine strains was investigated by mutational analyses and three-dimensional computer modeling. FSME-Immun Junior induced 100% seropositivity and similar neutralizing antibody titers against hybrid viruses containing the TBEV E protein of the two vaccine strains. Encepur Children induced 100% seropositivity only against the hybrid virus containing the E protein of the homologous K23 vaccine strain. Antibody responses induced by Encepur Children to the hybrid virus containing the E protein of the heterologous Nd strain were substantially and significantly (P virus. Structure-based mutational analyses of the TBEV E protein indicated that this is due to a mutation in the DI-DII hinge region of the K23 vaccine strain E protein which may have occurred during production of the vaccine seed virus and which is not present in any wild-type TBE viruses. Our data suggest that there are major differences in the abilities of two European subtype pediatric TBEV vaccines to induce antibodies capable of neutralizing heterologous TBEV strains. This is a result of a mutation in the DI-DII hinge region of the E protein of the K23

  12. Ice cloud processing of ultra-viscous/glassy aerosol particles leads to enhanced ice nucleation ability

    Directory of Open Access Journals (Sweden)

    R. Wagner

    2012-09-01

    Full Text Available The ice nucleation potential of airborne glassy aqueous aerosol particles has been investigated by controlled expansion cooling cycles in the AIDA aerosol and cloud chamber of the Karlsruhe Institute of Technology at temperatures between 247 and 216 K. Four different solutes were used as proxies for oxygenated organic matter found in the atmosphere: raffinose, 4-hydroxy-3-methoxy-DL-mandelic acid (HMMA, levoglucosan, and a multi-component mixture of raffinose with five dicarboxylic acids and ammonium sulphate. Similar to previous experiments with citric acid aerosols, all particles were found to nucleate ice heterogeneously before reaching the homogeneous freezing threshold provided that the freezing cycles were started well below the respective glass transition temperatures of the compounds; this is discussed in detail in a separate article. In this contribution, we identify a further mechanism by which glassy aerosols can promote ice nucleation below the homogeneous freezing limit. If the glassy aerosol particles are probed in freezing cycles started only a few degrees below their respective glass transition temperatures, they enter the liquid regime of the state diagram upon increasing relative humidity (moisture-induced glass-to-liquid transition before being able to act as heterogeneous ice nuclei. Ice formation then only occurs by homogeneous freezing at elevated supersaturation levels. When ice forms the remaining solution freeze concentrates and re-vitrifies. If these ice cloud processed glassy aerosol particles are then probed in a second freezing cycle at the same temperature, they catalyse ice formation at a supersaturation threshold between 5 and 30% with respect to ice. By analogy with the enhanced ice nucleation ability of insoluble ice nuclei like mineral dusts after they nucleate ice once, we refer to this phenomenon as pre-activation. We propose a number of possible explanations for why glassy aerosol particles that have re

  13. Overview of the IFMIF/EVEDA project

    Science.gov (United States)

    Knaster, J.; Garin, P.; Matsumoto, H.; Okumura, Y.; Sugimoto, M.; Arbeiter, F.; Cara, P.; Chel, S.; Facco, A.; Favuzza, P.; Furukawa, T.; Heidinger, R.; Ibarra, A.; Kanemura, T.; Kasugai, A.; Kondo, H.; Massaut, V.; Molla, J.; Micciche, G.; O'hira, S.; Sakamoto, K.; Yokomine, T.; Wakai, E.; the IFMIF/EVEDA Integrated Project Team

    2017-10-01

    IFMIF, the International Fusion Materials Irradiation Facility, is presently in its engineering validation and engineering design activities (EVEDA) phase under the Broader Approach Agreement. The engineering design activity (EDA) phase was successfully accomplished within the allocated time. The engineering validation activity (EVA) phase has focused on validating the Accelerator Facility (AF), the Target Facility and the Test Facility (TF) by constructing prototypes. The ELTL at JAEAc, Oarai successfully demonstrated the long-term stability of a Li flow under the IFMIF’s nominal operational conditions keeping the specified free-surface fluctuations below  ±1 mm in a continuous manner for 25 d. A full-scale prototype of the high flux test module (HFTM) was successfully tested in the HELOKA loop (KIT, Karlsruhe), where it was demonstrated that the irradiation temperature can be set individually and kept uniform. LIPAc, designed and constructed in European labs under the coordination of F4E, presently under installation and commissioning in the Rokkasho Fusion Institute, aims at validating the concept of IFMIF accelerators with a D+ beam of 125 mA continuous wave (CW) and 9 MeV. The commissioning phases of the H+/D+ beams at 100 keV are progressing and should be concluded in 2017; in turn, the commissioning of the 5 MeV beam is due to start during 2017. The D+ beam through the superconducting cavities is expected to be achieved within the Broader Approach Agreement time frame with the superconducting cryomodule being assembled in Rokkasho. The realisation of a fusion-relevant neutron source is a necessary step for the successful development of fusion. The ongoing success of the IFMIF/EVEDA involves ruling out concerns about potential technical showstoppers which were raised in the past. Thus, a situation has emerged where soon steps towards constructing a Li(d,xn) fusion-relevant neutron source could be taken, which is also justified in the light of costs

  14. Cross-validation of IASI/MetOp derived tropospheric δD with TES and ground-based FTIR observations

    Science.gov (United States)

    Lacour, J.-L.; Clarisse, L.; Worden, J.; Schneider, M.; Barthlott, S.; Hase, F.; Risi, C.; Clerbaux, C.; Hurtmans, D.; Coheur, P.-F.

    2015-03-01

    The Infrared Atmospheric Sounding Interferometer (IASI) flying onboard MetOpA and MetOpB is able to capture fine isotopic variations of the HDO to H2O ratio (δD) in the troposphere. Such observations at the high spatio-temporal resolution of the sounder are of great interest to improve our understanding of the mechanisms controlling humidity in the troposphere. In this study we aim to empirically assess the validity of our error estimation previously evaluated theoretically. To achieve this, we compare IASI δD retrieved profiles with other available profiles of δD, from the TES infrared sounder onboard AURA and from three ground-based FTIR stations produced within the MUSICA project: the NDACC (Network for the Detection of Atmospheric Composition Change) sites Kiruna and Izaña, and the TCCON site Karlsruhe, which in addition to near-infrared TCCON spectra also records mid-infrared spectra. We describe the achievable level of agreement between the different retrievals and show that these theoretical errors are in good agreement with empirical differences. The comparisons are made at different locations from tropical to Arctic latitudes, above sea and above land. Generally IASI and TES are similarly sensitive to δD in the free troposphere which allows one to compare their measurements directly. At tropical latitudes where IASI's sensitivity is lower than that of TES, we show that the agreement improves when taking into account the sensitivity of IASI in the TES retrieval. For the comparison IASI-FTIR only direct comparisons are performed because the sensitivity profiles of the two observing systems do not allow to take into account their differences of sensitivity. We identify a quasi negligible bias in the free troposphere (-3‰) between IASI retrieved δD with the TES, which are bias corrected, but important with the ground-based FTIR reaching -47‰. We also suggest that model-satellite observation comparisons could be optimized with IASI thanks to its high

  15. Seasonal, synoptic and diurnal variation of atmospheric water-isotopologues in the boundary layer of Southwestern Germany caused by plant transpiration, cold-front passages and dewfall.

    Science.gov (United States)

    Christner, Emanuel; Dyroff, Christoph; Kohler, Martin; Zahn, Andreas; Gonzales, Yenny; Schneider, Matthias

    2013-04-01

    Atmospheric water is an enormously crucial trace gas. It is responsible for ~70 % of the natural greenhouse effect (Schmidt et al., JGR, 2010) and carries huge amounts of latent heat. The isotopic composition of water vapor is an elegant tracer for a better understanding and quantification of the extremely complex and variable hydrological cycle in Earth's atmosphere (evaporation, cloud condensation, rainout, re-evaporation, snow), which in turn is a prerequisite to improve climate modeling and predictions. As H216O, H218O and HDO differ in vapor pressure and mass, isotope fractionation occurs due to condensation, evaporation and diffusion processes. In contrast to that, plants are able to transpire water with almost no isotope fractionation. For that reason the ratio of isotopologue concentrations in the boundary layer (BL) provides, compared to humidity measurements alone, independent and additional constraints for quantifying the strength of evaporation and transpiration. Furthermore the isotope ratios contain information about transport history of an air mass and microphysical processes, that is not accessible by humidity measurements. Within the project MUSICA (MUlti-platform remote Sensing of Isotopologues for investigating the Cycle of Atmospheric water) a commercial Picarro Analyzer L2120-i is operated at Karlsruhe in Southwestern Germany, which is continuously measuring the isotopologues H216O, HDO and H218O of atmospheric water vapor since January 2012. A one year record of H216O, HDO and H218O shows clear seasonal, synoptic and diurnal characteristics and reveals the main driving processes affecting the isotopic composition of water vapor in the Middle European BL. Changes in continental plant transpiration and evaporation throughout the year lead to a slow seasonal HDO/H216O-variation, that cannot be explained by pure Rayleigh condensation. Furthermore, cold-front passages from NW lead to fast and pronounced depletion of the HDO/H216O-ratio within

  16. Validation and comparison of two methods to assess human energy expenditure during free-living activities.

    Directory of Open Access Journals (Sweden)

    Panagiota Anastasopoulou

    Full Text Available BACKGROUND: The measurement of activity energy expenditure (AEE via accelerometry is the most commonly used objective method for assessing human daily physical activity and has gained increasing importance in the medical, sports and psychological science research in recent years. OBJECTIVE: The purpose of this study was to determine which of the following procedures is more accurate to determine the energy cost during the most common everyday life activities; a single regression or an activity based approach. For this we used a device that utilizes single regression models (GT3X, ActiGraph Manufacturing Technology Inc., FL., USA and a device using activity-dependent calculation models (move II, movisens GmbH, Karlsruhe, Germany. MATERIAL AND METHODS: Nineteen adults (11 male, 8 female; 30.4±9.0 years wore the activity monitors attached to the waist and a portable indirect calorimeter (IC as reference measure for AEE while performing several typical daily activities. The accuracy of the two devices for estimating AEE was assessed as the mean differences between their output and the reference and evaluated using Bland-Altman analysis. RESULTS: The GT3X overestimated the AEE of walking (GT3X minus reference, 1.26 kcal/min, walking fast (1.72 kcal/min, walking up-/downhill (1.45 kcal/min and walking upstairs (1.92 kcal/min and underestimated the AEE of jogging (-1.30 kcal/min and walking upstairs (-2.46 kcal/min. The errors for move II were smaller than those for GT3X for all activities. The move II overestimated AEE of walking (move II minus reference, 0.21 kcal/min, walking up-/downhill (0.06 kcal/min and stair walking (upstairs: 0.13 kcal/min; downstairs: 0.29 kcal/min and underestimated AEE of walking fast (-0.11 kcal/min and jogging (-0.93 kcal/min. CONCLUSIONS: Our data suggest that the activity monitor using activity-dependent calculation models is more appropriate for predicting AEE in daily life than the activity monitor using a single